From 2aba76f014a7b56ab4fe75845c5fd57b5590acc2 Mon Sep 17 00:00:00 2001 From: Michael Williamson Date: Fri, 20 May 2011 10:26:06 -0400 Subject: audio: tlv320aic26: fix PLL register configuration The current PLL configuration code for the tlc320aic26 codec appears to assume a hardcoded system clock of 12 MHz. Use the clock value provided by the DAI_OPS API for the calculation. Tested using a MityDSP-L138 platform providing a 24.576 MHz clock. Signed-off-by: Michael Williamson Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c index e2a7608..7859bdc 100644 --- a/sound/soc/codecs/tlv320aic26.c +++ b/sound/soc/codecs/tlv320aic26.c @@ -161,10 +161,18 @@ static int aic26_hw_params(struct snd_pcm_substream *substream, dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; } - /* Configure PLL */ + /** + * Configure PLL + * fsref = (mclk * PLLM) / 2048 + * where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal) + */ pval = 1; - jval = (fsref == 44100) ? 7 : 8; - dval = (fsref == 44100) ? 5264 : 1920; + /* compute J portion of multiplier */ + jval = fsref / (aic26->mclk / 2048); + /* compute fractional DDDD component of multiplier */ + dval = fsref - (jval * (aic26->mclk / 2048)); + dval = (10000 * dval) / (aic26->mclk / 2048); + dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval); qval = 0; reg = 0x8000 | qval << 11 | pval << 8 | jval << 2; aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg); -- cgit v0.10.2 From 508b76864c18f34f8d6ba08d192f5817f8dc8ead Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 20 May 2011 16:52:37 +0300 Subject: ASoC: tlv320aic3x: Don't sync first two registers from register cache There is no need to sync first two registers from cache to hw after a reset. First one is used to select page for register access and this driver is normally accessing page 0 only. Second one does a software reset which is obviously unneeded after hardware or previous software reset command. Signed-off-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index c3d96fc..9047bb1 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1114,7 +1114,7 @@ static int aic3x_set_power(struct snd_soc_codec *codec, int power) /* Sync reg_cache with the hardware */ codec->cache_only = 0; - for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++) + for (i = AIC3X_SAMPLE_RATE_SEL_REG; i < ARRAY_SIZE(aic3x_reg); i++) snd_soc_write(codec, i, cache[i]); if (aic3x->model == AIC3X_MODEL_3007) aic3x_init_3007(codec); -- cgit v0.10.2 From 9fb352b18b11124ed1ddebc0d74ebbd7ba8defd7 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 20 May 2011 16:52:38 +0300 Subject: ASoC: tlv320aic3x: Do soft reset to codec when going to bias off state TLV320AIC33, TLV320AIC34 and I believe others too in this family have some hw bugs that cause that analogue and digital VDD supplies remain leaking up to a few mA of current after certain use cases even the hw blocks inside codec are driven to off. Highest leakages occur after using the bypass paths inside codec but it is possible to get smaller leakages just by toggling mute switches in unused audio paths (i.e. no DAPM changes) while codec is on due another active audio path. While some cases are able to workaroud by making sure that e.g. output mixer switches are muted before powering down the output stage this doesn't help all the cases. Therefore use the software reset command to clear possible leakage currents since that works in every cases and affects only this codec instance. Only drawback is that now cache sync is required everytime when codec bias comes out from bias off state, not only when supply regulators were off. Signed-off-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 9047bb1..789453d 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1120,6 +1120,13 @@ static int aic3x_set_power(struct snd_soc_codec *codec, int power) aic3x_init_3007(codec); codec->cache_sync = 0; } else { + /* + * Do soft reset to this codec instance in order to clear + * possible VDD leakage currents in case the supply regulators + * remain on + */ + snd_soc_write(codec, AIC3X_RESET, SOFT_RESET); + codec->cache_sync = 1; aic3x->power = 0; /* HW writes are needless when bias is off */ codec->cache_only = 1; -- cgit v0.10.2 From 7f77897ef2b6a5ee4eb8bc24fe8b1f3eab254328 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 24 May 2011 11:43:18 +0200 Subject: HID: hiddev: fix potential use-after-free Commit 6cb4b040795 ("HID: hiddev: fix race between hiddev_disconnect and hiddev_release") made it possible to access hiddev (for unlocking the existance mutex) once hiddev has been kfreed. Change the order so that this can not happen (always unlock the mutex first, it is needed only to protect access to ->exist and ->open). Signed-off-by: Jiri Kosina diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index ff3c644..4985f485 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -923,10 +923,11 @@ void hiddev_disconnect(struct hid_device *hid) usb_deregister_dev(usbhid->intf, &hiddev_class); if (hiddev->open) { + mutex_unlock(&hiddev->existancelock); usbhid_close(hiddev->hid); wake_up_interruptible(&hiddev->wait); } else { + mutex_unlock(&hiddev->existancelock); kfree(hiddev); } - mutex_unlock(&hiddev->existancelock); } -- cgit v0.10.2 From e23be0a27dcc9297ff0495360d89bc5b0bf12383 Mon Sep 17 00:00:00 2001 From: Jimmy Hon Date: Fri, 20 May 2011 17:59:19 -0400 Subject: HID: add quirk for HyperPen 10000U Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with HID_QUIRK_MULTI_INPUT. Originally the device is reporting the x,y coordinates on Z and RX. By adding this quirk, there will be two kernel devices. The first one is muted and the second device will report coordinates on X and Y. Signed-off-by: Jimmy Hon Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 0b374a6..2bbaad7 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -622,6 +622,7 @@ #define USB_VENDOR_ID_UCLOGIC 0x5543 #define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209 0x0042 #define USB_DEVICE_ID_UCLOGIC_TABLET_KNA5 0x6001 +#define USB_DEVICE_ID_UCLOGIC_TABLET_TWA60 0x0064 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U 0x0003 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U 0x0004 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 0e30b14..621959d 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -74,6 +74,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH, HID_QUIRK_MULTI_INPUT }, -- cgit v0.10.2 From 8c127f0717b438e6abc3d92d4ae248c4224b9dcb Mon Sep 17 00:00:00 2001 From: Hans Petter Selasky Date: Wed, 25 May 2011 09:24:32 -0700 Subject: Input: properly assign return value of clamp() macro. [dtor@mail.ru: added mousedev changes] Signed-off-by: Hans Petter Selasky Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/input.c b/drivers/input/input.c index 75e11c7..da38d97 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1756,7 +1756,7 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) } else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) { mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum - dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1, - clamp(mt_slots, 2, 32); + mt_slots = clamp(mt_slots, 2, 32); } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { mt_slots = 2; } else { diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 257e033..0110b5a 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -187,7 +187,7 @@ static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, if (size == 0) size = xres ? : 1; - clamp(value, min, max); + value = clamp(value, min, max); mousedev->packet.x = ((value - min) * xres) / size; mousedev->packet.abs_event = 1; @@ -201,7 +201,7 @@ static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, if (size == 0) size = yres ? : 1; - clamp(value, min, max); + value = clamp(value, min, max); mousedev->packet.y = yres - ((value - min) * yres) / size; mousedev->packet.abs_event = 1; -- cgit v0.10.2 From 5c699d7d3f94ee1dd934edea889b32f8279a4e65 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 May 2011 11:49:16 +0300 Subject: HID: hiddev: fix use after free in hiddev_release There are a couple use after free bugs here. Signed-off-by: Dan Carpenter [jkosina@suse.cz: removed already fixed hunk] Signed-off-by: Jiri Kosina diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 4985f485..7c1188b 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -248,12 +248,15 @@ static int hiddev_release(struct inode * inode, struct file * file) usbhid_close(list->hiddev->hid); usbhid_put_power(list->hiddev->hid); } else { + mutex_unlock(&list->hiddev->existancelock); kfree(list->hiddev); + kfree(list); + return 0; } } - kfree(list); mutex_unlock(&list->hiddev->existancelock); + kfree(list); return 0; } -- cgit v0.10.2 From 4a8fcc2cc34b7546584bf9ebd8f0caf433e4736e Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:09 -0700 Subject: [SCSI] target: Fix multi task->task_sg[] chaining logic bug This patch fixes a bug in transport_do_task_sg_chain() used by HW target mode modules with sg_chain() to provide a single sg_next() walkable memory layout for use with pci_map_sg() and friends. This patch addresses an issue with mapping multiple small block max_sector tasks across multiple struct se_task->task_sg[] mappings for HW target mode operation. This was causing OOPs with (cmd->t_task->t_tasks_no > 1) I/O traffic for HW target drivers using transport_do_task_sg_chain(), and has been tested so far with tcm_fc(openfcoe), tcm_qla2xxx, and ib_srpt fabrics with t_tasks_no > 1 IBLOCK backends using a smaller max_sectors to trigger the original issue. Signed-off-by: Nicholas Bellinger Acked-by: Kiran Patil Cc: stable@kernel.org Signed-off-by: James Bottomley diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9583b23..fefe10a 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4776,18 +4776,20 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) sg_end_cur->page_link &= ~0x02; sg_chain(sg_head, task_sg_num, sg_head_cur); - sg_count += (task->task_sg_num + 1); - } else sg_count += task->task_sg_num; + task_sg_num = (task->task_sg_num + 1); + } else { + sg_chain(sg_head, task_sg_num, sg_head_cur); + sg_count += task->task_sg_num; + task_sg_num = task->task_sg_num; + } sg_head = sg_head_cur; sg_link = sg_link_cur; - task_sg_num = task->task_sg_num; continue; } sg_head = sg_first = &task->task_sg[0]; sg_link = &task->task_sg[task->task_sg_num]; - task_sg_num = task->task_sg_num; /* * Check for single task.. */ @@ -4798,9 +4800,12 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) */ sg_end = &task->task_sg[task->task_sg_num - 1]; sg_end->page_link &= ~0x02; - sg_count += (task->task_sg_num + 1); - } else sg_count += task->task_sg_num; + task_sg_num = (task->task_sg_num + 1); + } else { + sg_count += task->task_sg_num; + task_sg_num = task->task_sg_num; + } } /* * Setup the starting pointer and total t_tasks_sg_linked_no including @@ -4809,21 +4814,20 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) T_TASK(cmd)->t_tasks_sg_chained = sg_first; T_TASK(cmd)->t_tasks_sg_chained_no = sg_count; - DEBUG_CMD_M("Setup T_TASK(cmd)->t_tasks_sg_chained: %p and" - " t_tasks_sg_chained_no: %u\n", T_TASK(cmd)->t_tasks_sg_chained, + DEBUG_CMD_M("Setup cmd: %p T_TASK(cmd)->t_tasks_sg_chained: %p and" + " t_tasks_sg_chained_no: %u\n", cmd, T_TASK(cmd)->t_tasks_sg_chained, T_TASK(cmd)->t_tasks_sg_chained_no); for_each_sg(T_TASK(cmd)->t_tasks_sg_chained, sg, T_TASK(cmd)->t_tasks_sg_chained_no, i) { - DEBUG_CMD_M("SG: %p page: %p length: %d offset: %d\n", - sg, sg_page(sg), sg->length, sg->offset); + DEBUG_CMD_M("SG[%d]: %p page: %p length: %d offset: %d, magic: 0x%08x\n", + i, sg, sg_page(sg), sg->length, sg->offset, sg->sg_magic); if (sg_is_chain(sg)) DEBUG_CMD_M("SG: %p sg_is_chain=1\n", sg); if (sg_is_last(sg)) DEBUG_CMD_M("SG: %p sg_is_last=1\n", sg); } - } EXPORT_SYMBOL(transport_do_task_sg_chain); -- cgit v0.10.2 From 1e7de68c57daf75ec4b721f101f88cccf029e38c Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:10 -0700 Subject: [SCSI] target: Fix interrupt context bug with stats_lock and core_tmr_alloc_req This patch fixes two bugs wrt to the interrupt context usage of target core with HW target mode drivers. It first converts the usage of struct se_device->stats_lock in transport_get_lun_for_cmd() and core_tmr_lun_reset() to properly use spin_lock_irq() to address an BUG with CONFIG_LOCKDEP_SUPPORT=y enabled. This patch also adds a 'in_interrupt()' check to allow GFP_ATOMIC usage from core_tmr_alloc_req() to fix a 'sleeping in interrupt context' BUG with HW target fabrics that require this logic to function. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index d25e208..fc10ed4 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -150,13 +150,13 @@ out: { struct se_device *dev = se_lun->lun_se_dev; - spin_lock(&dev->stats_lock); + spin_lock_irq(&dev->stats_lock); dev->num_cmds++; if (se_cmd->data_direction == DMA_TO_DEVICE) dev->write_bytes += se_cmd->data_length; else if (se_cmd->data_direction == DMA_FROM_DEVICE) dev->read_bytes += se_cmd->data_length; - spin_unlock(&dev->stats_lock); + spin_unlock_irq(&dev->stats_lock); } /* diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 4a10983..59b8b9c 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -55,7 +55,8 @@ struct se_tmr_req *core_tmr_alloc_req( { struct se_tmr_req *tmr; - tmr = kmem_cache_zalloc(se_tmr_req_cache, GFP_KERNEL); + tmr = kmem_cache_zalloc(se_tmr_req_cache, (in_interrupt()) ? + GFP_ATOMIC : GFP_KERNEL); if (!(tmr)) { printk(KERN_ERR "Unable to allocate struct se_tmr_req\n"); return ERR_PTR(-ENOMEM); @@ -398,9 +399,9 @@ int core_tmr_lun_reset( printk(KERN_INFO "LUN_RESET: SCSI-2 Released reservation\n"); } - spin_lock(&dev->stats_lock); + spin_lock_irq(&dev->stats_lock); dev->num_resets++; - spin_unlock(&dev->stats_lock); + spin_unlock_irq(&dev->stats_lock); DEBUG_LR("LUN_RESET: %s for [%s] Complete\n", (preempt_and_abort_list) ? "Preempt" : "TMR", -- cgit v0.10.2 From 42c6951e2f7a665bcb57b92fe3f806ba48152c0e Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:11 -0700 Subject: [SCSI] target: Fix bug with task_sg chained transport_free_dev_tasks release This patch addresses a bug in the target core release path for HW operation where transport_free_dev_tasks() was incorrectly being called from transport_lun_remove_cmd() while releasing a se_cmd reference and calling struct target_core_fabric_ops->queue_data_in(). This would result in a OOPs with HW target mode when the release of se_task->task_sg[] would happen before pci_unmap_sg() can be called in HW target mode fabric module code. This patch addresses the issue by moving transport_free_dev_tasks() from transport_lun_remove_cmd() into transport_generic_free_cmd(), and adding TRANSPORT_FREE_CMD_INTR and transport_generic_free_cmd_intr() to allow se_cmd descriptor release to happen fromfrom within transport_processing_thread() process context when release of se_cmd is not possible from HW interrupt context. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index fefe10a..3eeb3e2 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -762,7 +762,6 @@ static void transport_lun_remove_cmd(struct se_cmd *cmd) transport_all_task_dev_remove_state(cmd); spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); - transport_free_dev_tasks(cmd); check_lun: spin_lock_irqsave(&lun->lun_cmd_lock, flags); @@ -2058,6 +2057,13 @@ int transport_generic_handle_tmr( } EXPORT_SYMBOL(transport_generic_handle_tmr); +void transport_generic_free_cmd_intr( + struct se_cmd *cmd) +{ + transport_add_cmd_to_queue(cmd, TRANSPORT_FREE_CMD_INTR); +} +EXPORT_SYMBOL(transport_generic_free_cmd_intr); + static int transport_stop_tasks_for_cmd(struct se_cmd *cmd) { struct se_task *task, *task_tmp; @@ -5301,6 +5307,8 @@ void transport_generic_free_cmd( if (wait_for_tasks && cmd->transport_wait_for_tasks) cmd->transport_wait_for_tasks(cmd, 0, 0); + transport_free_dev_tasks(cmd); + transport_generic_remove(cmd, release_to_pool, session_reinstatement); } @@ -6136,6 +6144,9 @@ get_cmd: case TRANSPORT_REMOVE: transport_generic_remove(cmd, 1, 0); break; + case TRANSPORT_FREE_CMD_INTR: + transport_generic_free_cmd(cmd, 0, 1, 0); + break; case TRANSPORT_PROCESS_TMR: transport_generic_do_tmr(cmd); break; diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 1d3b5b2..561ac99 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -98,6 +98,7 @@ enum transport_state_table { TRANSPORT_REMOVE = 14, TRANSPORT_FREE = 15, TRANSPORT_NEW_CMD_MAP = 16, + TRANSPORT_FREE_CMD_INTR = 17, }; /* Used for struct se_cmd->se_cmd_flags */ diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h index 59aa464..24a1c6c 100644 --- a/include/target/target_core_transport.h +++ b/include/target/target_core_transport.h @@ -172,6 +172,7 @@ extern int transport_generic_handle_cdb_map(struct se_cmd *); extern int transport_generic_handle_data(struct se_cmd *); extern void transport_new_cmd_failure(struct se_cmd *); extern int transport_generic_handle_tmr(struct se_cmd *); +extern void transport_generic_free_cmd_intr(struct se_cmd *); extern void __transport_stop_task_timer(struct se_task *, unsigned long *); extern unsigned char transport_asciihex_to_binaryhex(unsigned char val[2]); extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32, -- cgit v0.10.2 From ccf4d680f80941f0073a9bc6a5e0ed41496b46e7 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:12 -0700 Subject: [SCSI] target: Fix task->task_execute_queue=1 clear bug + LUN_RESET OOPs This patch fixes a bug where task->task_execute_queue=1 was not being cleared once se_task had been removed from se_device->execute_task_list, resulting in an OOPs in core_tmr_lun_reset() for the task->task_active=0 case where transport_remove_task_from_execute_queue() was incorrectly being called. This patch fixes two cases in transport_get_task_from_execute_queue() and transport_remove_task_from_execute_queue() to properly clear task->task_execute_queue=0 once list_del(&task->t_execute_list) has been called. It also adds an explict check in transport_remove_task_from_execute_queue() to dump_stack + return if called with task->task_execute_queue=0. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 3eeb3e2..beaf8fa 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1194,6 +1194,7 @@ transport_get_task_from_execute_queue(struct se_device *dev) break; list_del(&task->t_execute_list); + atomic_set(&task->task_execute_queue, 0); atomic_dec(&dev->execute_tasks); return task; @@ -1209,8 +1210,14 @@ void transport_remove_task_from_execute_queue( { unsigned long flags; + if (atomic_read(&task->task_execute_queue) == 0) { + dump_stack(); + return; + } + spin_lock_irqsave(&dev->execute_task_lock, flags); list_del(&task->t_execute_list); + atomic_set(&task->task_execute_queue, 0); atomic_dec(&dev->execute_tasks); spin_unlock_irqrestore(&dev->execute_task_lock, flags); } -- cgit v0.10.2 From 1078da163fd2c1d3cba76cd4018e897a4f98efc5 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:13 -0700 Subject: [SCSI] target: Convert REPORT_LUNs to use int_to_scsilun This patch converts transport_core_report_lun_response() to use drivers/scsi/scsi_scan.c:int_to_scsilun instead of using the struct target_core_fabric_ops->pack_lun() fabric provided API vector. It also removes the tfo->pack_lun check from target_fabric_tf_ops_check() and removes from struct target_core_fabric_ops->pack_lun() from target_core_fabric_ops.h, and the following mainline scsi-misc fabric modules: *) tcm_loop: Drop tcm_loop_pack_lun() usage *) tcm_fc: Drop ft_pack_lun() usage Reported-by: Mike Christie Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index aed4e46..09681ba 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -939,18 +939,6 @@ static u16 tcm_loop_get_fabric_sense_len(void) return 0; } -static u64 tcm_loop_pack_lun(unsigned int lun) -{ - u64 result; - - /* LSB of lun into byte 1 big-endian */ - result = ((lun & 0xff) << 8); - /* use flat space addressing method */ - result |= 0x40 | ((lun >> 8) & 0x3f); - - return cpu_to_le64(result); -} - static char *tcm_loop_dump_proto_id(struct tcm_loop_hba *tl_hba) { switch (tl_hba->tl_proto_id) { @@ -1481,7 +1469,6 @@ static int tcm_loop_register_configfs(void) fabric->tf_ops.set_fabric_sense_len = &tcm_loop_set_fabric_sense_len; fabric->tf_ops.get_fabric_sense_len = &tcm_loop_get_fabric_sense_len; fabric->tf_ops.is_state_remove = &tcm_loop_is_state_remove; - fabric->tf_ops.pack_lun = &tcm_loop_pack_lun; tf_cg = &fabric->tf_group; /* diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index a5f44a6..ee6fad9 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -497,10 +497,6 @@ static int target_fabric_tf_ops_check( printk(KERN_ERR "Missing tfo->is_state_remove()\n"); return -EINVAL; } - if (!(tfo->pack_lun)) { - printk(KERN_ERR "Missing tfo->pack_lun()\n"); - return -EINVAL; - } /* * We at least require tfo->fabric_make_wwn(), tfo->fabric_drop_wwn() * tfo->fabric_make_tpg() and tfo->fabric_drop_tpg() in diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index fc10ed4..8407f9c 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -658,8 +659,7 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) struct se_session *se_sess = SE_SESS(se_cmd); struct se_task *se_task; unsigned char *buf = (unsigned char *)T_TASK(se_cmd)->t_task_buf; - u32 cdb_offset = 0, lun_count = 0, offset = 8; - u64 i, lun; + u32 cdb_offset = 0, lun_count = 0, offset = 8, i; list_for_each_entry(se_task, &T_TASK(se_cmd)->t_task_list, t_list) break; @@ -675,15 +675,7 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) * a $FABRIC_MOD. In that case, report LUN=0 only. */ if (!(se_sess)) { - lun = 0; - buf[offset++] = ((lun >> 56) & 0xff); - buf[offset++] = ((lun >> 48) & 0xff); - buf[offset++] = ((lun >> 40) & 0xff); - buf[offset++] = ((lun >> 32) & 0xff); - buf[offset++] = ((lun >> 24) & 0xff); - buf[offset++] = ((lun >> 16) & 0xff); - buf[offset++] = ((lun >> 8) & 0xff); - buf[offset++] = (lun & 0xff); + int_to_scsilun(0, (struct scsi_lun *)&buf[offset]); lun_count = 1; goto done; } @@ -703,15 +695,8 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) if ((cdb_offset + 8) >= se_cmd->data_length) continue; - lun = cpu_to_be64(CMD_TFO(se_cmd)->pack_lun(deve->mapped_lun)); - buf[offset++] = ((lun >> 56) & 0xff); - buf[offset++] = ((lun >> 48) & 0xff); - buf[offset++] = ((lun >> 40) & 0xff); - buf[offset++] = ((lun >> 32) & 0xff); - buf[offset++] = ((lun >> 24) & 0xff); - buf[offset++] = ((lun >> 16) & 0xff); - buf[offset++] = ((lun >> 8) & 0xff); - buf[offset++] = (lun & 0xff); + int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]); + offset += 8; cdb_offset += 8; } spin_unlock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index fcdbbff..84e868c 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -519,13 +519,6 @@ static u32 ft_tpg_get_inst_index(struct se_portal_group *se_tpg) return tpg->index; } -static u64 ft_pack_lun(unsigned int index) -{ - WARN_ON(index >= 256); - /* Caller wants this byte-swapped */ - return cpu_to_le64((index & 0xff) << 8); -} - static struct target_core_fabric_ops ft_fabric_ops = { .get_fabric_name = ft_get_fabric_name, .get_fabric_proto_ident = fc_get_fabric_proto_ident, @@ -564,7 +557,6 @@ static struct target_core_fabric_ops ft_fabric_ops = { .get_fabric_sense_len = ft_get_fabric_sense_len, .set_fabric_sense_len = ft_set_fabric_sense_len, .is_state_remove = ft_is_state_remove, - .pack_lun = ft_pack_lun, /* * Setup function pointers for generic logic in * target_core_fabric_configfs.c diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h index dc78f77..747e140 100644 --- a/include/target/target_core_fabric_ops.h +++ b/include/target/target_core_fabric_ops.h @@ -77,7 +77,6 @@ struct target_core_fabric_ops { u16 (*set_fabric_sense_len)(struct se_cmd *, u32); u16 (*get_fabric_sense_len)(void); int (*is_state_remove)(struct se_cmd *); - u64 (*pack_lun)(unsigned int); /* * fabric module calls for target_core_fabric_configfs.c */ -- cgit v0.10.2 From 61db1802bf33bf027cd97ba3f79566b2b2fce5c6 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:14 -0700 Subject: [SCSI] target: Convert TASK_ATTR to scsi_tcq.h definitions This patch converts target core and follwing scsi-misc upstream fabric modules to use include/scsi/scsi_tcq.h includes for SIMPLE, HEAD_OF_QUEUE and ORDERED SCSI tasks instead of scsi/libsas.h with TASK_ATTR* *) tcm_loop: Convert tcm_loop_allocate_core_cmd() + tcm_loop_device_reset() to scsi_tcq.h *) tcm_fc: Convert ft_send_cmd() from FCP_PTA_* to scsi_tcq.h Reported-by: Christoph Hellwig Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 09681ba..dee2a2c 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -31,7 +31,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -95,17 +95,17 @@ static struct se_cmd *tcm_loop_allocate_core_cmd( if (sc->device->tagged_supported) { switch (sc->tag) { case HEAD_OF_QUEUE_TAG: - sam_task_attr = TASK_ATTR_HOQ; + sam_task_attr = MSG_HEAD_TAG; break; case ORDERED_QUEUE_TAG: - sam_task_attr = TASK_ATTR_ORDERED; + sam_task_attr = MSG_ORDERED_TAG; break; default: - sam_task_attr = TASK_ATTR_SIMPLE; + sam_task_attr = MSG_SIMPLE_TAG; break; } } else - sam_task_attr = TASK_ATTR_SIMPLE; + sam_task_attr = MSG_SIMPLE_TAG; /* * Initialize struct se_cmd descriptor from target_core_mod infrastructure @@ -379,7 +379,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc) * Initialize struct se_cmd descriptor from target_core_mod infrastructure */ transport_init_se_cmd(se_cmd, se_tpg->se_tpg_tfo, se_sess, 0, - DMA_NONE, TASK_ATTR_SIMPLE, + DMA_NONE, MSG_SIMPLE_TAG, &tl_cmd->tl_sense_buf[0]); /* * Allocate the LUN_RESET TMR diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 7ff6a35..331d423 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -41,7 +41,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -911,7 +911,7 @@ static int pscsi_do_task(struct se_task *task) * descriptor */ blk_execute_rq_nowait(pdv->pdv_sd->request_queue, NULL, pt->pscsi_req, - (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ), + (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG), pscsi_req_done); return PYX_TRANSPORT_SENT_TO_TRANSPORT; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index beaf8fa..5b1ce81 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -42,7 +42,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -1074,7 +1074,7 @@ static inline int transport_add_task_check_sam_attr( * head of the struct se_device->execute_task_list, and task_prev * after that for each subsequent task */ - if (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ) { + if (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG) { list_add(&task->t_execute_list, (task_prev != NULL) ? &task_prev->t_execute_list : @@ -1873,7 +1873,7 @@ static int transport_check_alloc_task_attr(struct se_cmd *cmd) if (SE_DEV(cmd)->dev_task_attr_type != SAM_TASK_ATTR_EMULATED) return 0; - if (cmd->sam_task_attr == TASK_ATTR_ACA) { + if (cmd->sam_task_attr == MSG_ACA_TAG) { DEBUG_STA("SAM Task Attribute ACA" " emulation is not supported\n"); return -1; @@ -2517,7 +2517,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) * Check for the existence of HEAD_OF_QUEUE, and if true return 1 * to allow the passed struct se_cmd list of tasks to the front of the list. */ - if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + if (cmd->sam_task_attr == MSG_HEAD_TAG) { atomic_inc(&SE_DEV(cmd)->dev_hoq_count); smp_mb__after_atomic_inc(); DEBUG_STA("Added HEAD_OF_QUEUE for CDB:" @@ -2525,7 +2525,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) T_TASK(cmd)->t_task_cdb[0], cmd->se_ordered_id); return 1; - } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { spin_lock(&SE_DEV(cmd)->ordered_cmd_lock); list_add_tail(&cmd->se_ordered_list, &SE_DEV(cmd)->ordered_cmd_list); @@ -3424,7 +3424,7 @@ static int transport_generic_cmd_sequencer( * See spc4r17 section 5.3 */ if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) - cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->sam_task_attr = MSG_HEAD_TAG; cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; break; case READ_BUFFER: @@ -3632,7 +3632,7 @@ static int transport_generic_cmd_sequencer( * See spc4r17 section 5.3 */ if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) - cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->sam_task_attr = MSG_HEAD_TAG; cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; break; default: @@ -3790,21 +3790,21 @@ static void transport_complete_task_attr(struct se_cmd *cmd) struct se_cmd *cmd_p, *cmd_tmp; int new_active_tasks = 0; - if (cmd->sam_task_attr == TASK_ATTR_SIMPLE) { + if (cmd->sam_task_attr == MSG_SIMPLE_TAG) { atomic_dec(&dev->simple_cmds); smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; DEBUG_STA("Incremented dev->dev_cur_ordered_id: %u for" " SIMPLE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); - } else if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + } else if (cmd->sam_task_attr == MSG_HEAD_TAG) { atomic_dec(&dev->dev_hoq_count); smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; DEBUG_STA("Incremented dev_cur_ordered_id: %u for" " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); - } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { spin_lock(&dev->ordered_cmd_lock); list_del(&cmd->se_ordered_list); atomic_dec(&dev->dev_ordered_sync); @@ -3837,7 +3837,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd) new_active_tasks++; spin_lock(&dev->delayed_cmd_lock); - if (cmd_p->sam_task_attr == TASK_ATTR_ORDERED) + if (cmd_p->sam_task_attr == MSG_ORDERED_TAG) break; } spin_unlock(&dev->delayed_cmd_lock); diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 49e5177..c056a11 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -592,8 +593,25 @@ static void ft_send_cmd(struct ft_cmd *cmd) case FCP_CFL_WRDATA | FCP_CFL_RDDATA: goto err; /* TBD not supported by tcm_fc yet */ } + /* + * Locate the SAM Task Attr from fc_pri_ta + */ + switch (fcp->fc_pri_ta & FCP_PTA_MASK) { + case FCP_PTA_HEADQ: + task_attr = MSG_HEAD_TAG; + break; + case FCP_PTA_ORDERED: + task_attr = MSG_ORDERED_TAG; + break; + case FCP_PTA_ACA: + task_attr = MSG_ACA_TAG; + break; + case FCP_PTA_SIMPLE: /* Fallthrough */ + default: + task_attr = MSG_SIMPLE_TAG; + } + - /* FCP_PTA_ maps 1:1 to TASK_ATTR_ */ task_attr = fcp->fc_pri_ta & FCP_PTA_MASK; data_len = ntohl(fcp->fc_dl); cmd->cdb = fcp->fc_cdb; diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h index d6e7994..81dd12e 100644 --- a/include/scsi/scsi_tcq.h +++ b/include/scsi/scsi_tcq.h @@ -9,6 +9,7 @@ #define MSG_SIMPLE_TAG 0x20 #define MSG_HEAD_TAG 0x21 #define MSG_ORDERED_TAG 0x22 +#define MSG_ACA_TAG 0x24 /* unsupported */ #define SCSI_NO_TAG (-1) /* identify no tag in use */ -- cgit v0.10.2 From 5aceca9d3cbdacbd017712513387d930f9f944d9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 23 May 2011 17:12:22 -0700 Subject: PCI: Fix warning in drivers/pci/probe.c on sparc64 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit IO_SPACE_LIMIT is currently used in two ways: 1) As a way to mask I/O port values read out of PCI base address registers. This value should be 64-bit. 2) As a value which is the upper limit for all I/O "ports" in the system. On sparc64 we store the full 64-bit physical I/O address in the resources. For this reason we define IO_SPACE_LIMIT at a 64-bit "all 1's". This is the right value to use for ioport_resource.end and for the check made in drivers/pcmcia/rsrc_nonstatic.c:adjust_io(). But in driver/pci/probe.c:__pci_read_base() we mask this against a "u32" variable and thus get the following warning: drivers/pci/probe.c: In function ¡__pci_read_base¢: drivers/pci/probe.c:207: warning: large integer implicitly truncated to unsigned type Fix this by using an explicit "u32" cast. I considered changing sparc64 to define a 32-bit "all 1's" like most other systems do, but this wouldn't work because the checks in PCMCIA's rsrc_nonstatic.c would no longer be right since they are testing against fully formed 64-bit resources. As described above, on sparc64 such resources will hold full 64-bit physical I/O addresses, not bus-centric 32-bit ones. Signed-off-by: David S. Miller Signed-off-by: Jesse Barnes diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 48849ff..bafb3c3 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -168,7 +168,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN; if (type == pci_bar_io) { l &= PCI_BASE_ADDRESS_IO_MASK; - mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT; + mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT; } else { l &= PCI_BASE_ADDRESS_MEM_MASK; mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; -- cgit v0.10.2 From ebf30dc91cc8592cd72b004219cfc276b3ad2854 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 31 May 2011 16:10:00 -0700 Subject: msm: timer: Fix SMP build error Fix build breakage on SMP=y builds due to 0f7b332 (ARM: consolidate SMP cross call implementation, 2011-04-03) arch/arm/mach-msm/timer.c: In function 'local_timer_setup': arch/arm/mach-msm/timer.c:295: error: implicit declaration of function 'gic_enable_ppi' Signed-off-by: Stephen Boyd Signed-off-by: David Brown diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 38b95e9..9bfdd5a 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -23,6 +23,8 @@ #include #include +#include + #include #include -- cgit v0.10.2 From 3f37d6229ca309f96b163b943ff982f4697630cd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 25 May 2011 19:21:25 -0700 Subject: PCI: fix new kernel-doc warning Fix pci.c kernel-doc warnings: Warning(drivers/pci/pci.c:3292): No description found for parameter 'flags' Warning(drivers/pci/pci.c:3292): Excess function parameter 'change_bridge_flags' description in 'pci_set_vga_state' Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 56098b3..e43a7bb 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3284,7 +3284,7 @@ static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, * @dev: the PCI device * @decode: true = enable decoding, false = disable decoding * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY - * @change_bridge_flags: traverse ancestors and change bridges + * @flags: traverse ancestors and change bridges * CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE */ int pci_set_vga_state(struct pci_dev *dev, bool decode, -- cgit v0.10.2 From 6e33a852a37dee02979ec9d82bea26c07cee5bce Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Sat, 14 May 2011 19:27:33 +0200 Subject: x86/PCI/ACPI: fix type mismatch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The flags field of struct resource from linux/ioport.h is "unsigned long". Change the "type" parameter of coalesce_windows() function to match that field. This fixes the following warning messages when compiling with "make C=1 W=1 bzImage modules": arch/x86/pci/acpi.c: In function ‘coalesce_windows’: arch/x86/pci/acpi.c:198: warning: conversion to ‘long unsigned int’ from ‘int’ may change the sign of the result arch/x86/pci/acpi.c:203: warning: conversion to ‘long unsigned int’ from ‘int’ may change the sign of the result Signed-off-by: Márton Németh Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 0972315..68c3c13 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -188,7 +188,7 @@ static bool resource_contains(struct resource *res, resource_size_t point) return false; } -static void coalesce_windows(struct pci_root_info *info, int type) +static void coalesce_windows(struct pci_root_info *info, unsigned long type) { int i, j; struct resource *res1, *res2; -- cgit v0.10.2 From 74facffeca3795ffb5cf8898f5859fbb822e4c5d Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 2 Jun 2011 11:16:22 +0100 Subject: ARM: Allow SoCs to enable scatterlist chaining Allow SoCs to enable the scatterlist chaining support, which allows scatterlist tables to be broken up into smaller allocations. As support for this feature depends on the implementation details of the users of the scatterlists, we can't enable this globally without auditing all the users, which is a very big task. Instead, let SoCs progressively switch over to using this. SoC drivers using scatterlists and SoC DMA implementations need auditing before this option can be enabled for the SoC. Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278..cc0dcbf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -37,6 +37,9 @@ config ARM Europe. There is an ARM Linux project with a web page at . +config ARM_HAS_SG_CHAIN + bool + config HAVE_PWM bool diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index 2f87870..cefdb8f 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -1,6 +1,10 @@ #ifndef _ASMARM_SCATTERLIST_H #define _ASMARM_SCATTERLIST_H +#ifdef CONFIG_ARM_HAS_SG_CHAIN +#define ARCH_HAS_SG_CHAIN +#endif + #include #include #include -- cgit v0.10.2 From eb7073db1076777496495483854993165e14790f Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 2 Jun 2011 11:31:29 +0900 Subject: 8250_pci: add -ENODEV code for Intel EG20T PCH Intel EG20T PCH has UART device which is compatible with 8250. Currently, with general configuration, the PCH UART driver is not loaded but 8250 standard driver is loaded. Therefore, in case of using PCH UART driver, need to disable 8250 pci function. However, this procedure is not best solution. This patch, in 8250_pci, if the device is the PCH or the family IOH, '-ENODEV' is returned. As a result, disabling 8250-pci processing becomes unnecessary. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 4b4968a..d7dc513 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -994,6 +994,15 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int pci_eg20t_init(struct pci_dev *dev) +{ +#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) + return -ENODEV; +#else + return 0; +#endif +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -1446,6 +1455,56 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_oxsemi_tornado_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8811, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8812, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8813, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8814, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8027, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8028, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8029, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800C, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, /* * Cronyx Omega PCI (PLX-chip based) */ -- cgit v0.10.2 From 5def1360252b974faeb438775c19c14338bc1903 Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Sun, 5 Jun 2011 23:26:40 -0400 Subject: ext4: correct comments for ext4_free_blocks() metadata is not parameter of ext4_free_blocks() any more. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 859f2ae..eb71dd5 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4448,7 +4448,7 @@ ext4_mb_free_metadata(handle_t *handle, struct ext4_buddy *e4b, * @inode: inode * @block: start physical block to free * @count: number of blocks to count - * @metadata: Are these metadata blocks + * @flags: flags used by ext4_free_blocks */ void ext4_free_blocks(handle_t *handle, struct inode *inode, struct buffer_head *bh, ext4_fsblk_t block, -- cgit v0.10.2 From ab4bd22d3cce6977dc039664cc2d052e3147d662 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Sun, 5 Jun 2011 06:01:13 +0200 Subject: cfq-iosched: fix locking around ioc->ioc_data assignment Since we are modifying this RCU pointer, we need to hold the lock protecting it around it. This fixes a potential reuse and double free of a cfq io_context structure. The bug has been in CFQ for a long time, it hit very few people but those it did hit seemed to see it a lot. Tracked in RH bugzilla here: https://bugzilla.redhat.com/show_bug.cgi?id=577968 Credit goes to Paul Bolle for figuring out that the issue was around the one-hit ioc->ioc_data cache. Thanks to his hard work the issue is now fixed. Cc: stable@kernel.org Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 3c7b537..545b8d4 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2772,8 +2772,11 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd, smp_wmb(); cic->key = cfqd_dead_key(cfqd); - if (ioc->ioc_data == cic) + if (rcu_dereference(ioc->ioc_data) == cic) { + spin_lock(&ioc->lock); rcu_assign_pointer(ioc->ioc_data, NULL); + spin_unlock(&ioc->lock); + } if (cic->cfqq[BLK_RW_ASYNC]) { cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]); -- cgit v0.10.2 From f17722f917b2f21497deb6edc62fb1683daa08e6 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Mon, 6 Jun 2011 00:05:17 -0400 Subject: ext4: Fix max file size and logical block counting of extent format file Kazuya Mio reported that he was able to hit BUG_ON(next == lblock) in ext4_ext_put_gap_in_cache() while creating a sparse file in extent format and fill the tail of file up to its end. We will hit the BUG_ON when we write the last block (2^32-1) into the sparse file. The root cause of the problem lies in the fact that we specifically set s_maxbytes so that block at s_maxbytes fit into on-disk extent format, which is 32 bit long. However, we are not storing start and end block number, but rather start block number and length in blocks. It means that in order to cover extent from 0 to EXT_MAX_BLOCK we need EXT_MAX_BLOCK+1 to fit into len (because we counting block 0 as well) - and it does not. The only way to fix it without changing the meaning of the struct ext4_extent members is, as Kazuya Mio suggested, to lower s_maxbytes by one fs block so we can cover the whole extent we can get by the on-disk extent format. Also in many places EXT_MAX_BLOCK is used as length instead of maximum logical block number as the name suggests, it is all a bit messy. So this commit renames it to EXT_MAX_BLOCKS and change its usage in some places to actually be maximum number of blocks in the extent. The bug which this commit fixes can be reproduced as follows: dd if=/dev/zero of=/mnt/mp1/file bs= count=1 seek=$((2**32-2)) sync dd if=/dev/zero of=/mnt/mp1/file bs= count=1 seek=$((2**32-1)) Reported-by: Kazuya Mio Signed-off-by: Lukas Czerner Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h index 2e29abb..4764146 100644 --- a/fs/ext4/ext4_extents.h +++ b/fs/ext4/ext4_extents.h @@ -133,8 +133,11 @@ typedef int (*ext_prepare_callback)(struct inode *, struct ext4_ext_path *, #define EXT_BREAK 1 #define EXT_REPEAT 2 -/* Maximum logical block in a file; ext4_extent's ee_block is __le32 */ -#define EXT_MAX_BLOCK 0xffffffff +/* + * Maximum number of logical blocks in a file; ext4_extent's ee_block is + * __le32. + */ +#define EXT_MAX_BLOCKS 0xffffffff /* * EXT_INIT_MAX_LEN is the maximum number of blocks we can have in an diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 5199bac..4157570 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1408,7 +1408,7 @@ got_index: /* * ext4_ext_next_allocated_block: - * returns allocated block in subsequent extent or EXT_MAX_BLOCK. + * returns allocated block in subsequent extent or EXT_MAX_BLOCKS. * NOTE: it considers block number from index entry as * allocated block. Thus, index entries have to be consistent * with leaves. @@ -1422,7 +1422,7 @@ ext4_ext_next_allocated_block(struct ext4_ext_path *path) depth = path->p_depth; if (depth == 0 && path->p_ext == NULL) - return EXT_MAX_BLOCK; + return EXT_MAX_BLOCKS; while (depth >= 0) { if (depth == path->p_depth) { @@ -1439,12 +1439,12 @@ ext4_ext_next_allocated_block(struct ext4_ext_path *path) depth--; } - return EXT_MAX_BLOCK; + return EXT_MAX_BLOCKS; } /* * ext4_ext_next_leaf_block: - * returns first allocated block from next leaf or EXT_MAX_BLOCK + * returns first allocated block from next leaf or EXT_MAX_BLOCKS */ static ext4_lblk_t ext4_ext_next_leaf_block(struct inode *inode, struct ext4_ext_path *path) @@ -1456,7 +1456,7 @@ static ext4_lblk_t ext4_ext_next_leaf_block(struct inode *inode, /* zero-tree has no leaf blocks at all */ if (depth == 0) - return EXT_MAX_BLOCK; + return EXT_MAX_BLOCKS; /* go to index block */ depth--; @@ -1469,7 +1469,7 @@ static ext4_lblk_t ext4_ext_next_leaf_block(struct inode *inode, depth--; } - return EXT_MAX_BLOCK; + return EXT_MAX_BLOCKS; } /* @@ -1677,13 +1677,13 @@ static unsigned int ext4_ext_check_overlap(struct inode *inode, */ if (b2 < b1) { b2 = ext4_ext_next_allocated_block(path); - if (b2 == EXT_MAX_BLOCK) + if (b2 == EXT_MAX_BLOCKS) goto out; } /* check for wrap through zero on extent logical start block*/ if (b1 + len1 < b1) { - len1 = EXT_MAX_BLOCK - b1; + len1 = EXT_MAX_BLOCKS - b1; newext->ee_len = cpu_to_le16(len1); ret = 1; } @@ -1767,7 +1767,7 @@ repeat: fex = EXT_LAST_EXTENT(eh); next = ext4_ext_next_leaf_block(inode, path); if (le32_to_cpu(newext->ee_block) > le32_to_cpu(fex->ee_block) - && next != EXT_MAX_BLOCK) { + && next != EXT_MAX_BLOCKS) { ext_debug("next leaf block - %d\n", next); BUG_ON(npath != NULL); npath = ext4_ext_find_extent(inode, next, NULL); @@ -1887,7 +1887,7 @@ static int ext4_ext_walk_space(struct inode *inode, ext4_lblk_t block, BUG_ON(func == NULL); BUG_ON(inode == NULL); - while (block < last && block != EXT_MAX_BLOCK) { + while (block < last && block != EXT_MAX_BLOCKS) { num = last - block; /* find extent for this block */ down_read(&EXT4_I(inode)->i_data_sem); @@ -2020,7 +2020,7 @@ ext4_ext_put_gap_in_cache(struct inode *inode, struct ext4_ext_path *path, if (ex == NULL) { /* there is no extent yet, so gap is [0;-] */ lblock = 0; - len = EXT_MAX_BLOCK; + len = EXT_MAX_BLOCKS; ext_debug("cache gap(whole file):"); } else if (block < le32_to_cpu(ex->ee_block)) { lblock = block; @@ -2350,7 +2350,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode, * never happen because at least one of the end points * needs to be on the edge of the extent. */ - if (end == EXT_MAX_BLOCK) { + if (end == EXT_MAX_BLOCKS - 1) { ext_debug(" bad truncate %u:%u\n", start, end); block = 0; @@ -2398,7 +2398,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode, * If this is a truncate, this condition * should never happen */ - if (end == EXT_MAX_BLOCK) { + if (end == EXT_MAX_BLOCKS - 1) { ext_debug(" bad truncate %u:%u\n", start, end); err = -EIO; @@ -2478,7 +2478,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode, * we need to remove it from the leaf */ if (num == 0) { - if (end != EXT_MAX_BLOCK) { + if (end != EXT_MAX_BLOCKS - 1) { /* * For hole punching, we need to scoot all the * extents up when an extent is removed so that @@ -3699,7 +3699,7 @@ void ext4_ext_truncate(struct inode *inode) last_block = (inode->i_size + sb->s_blocksize - 1) >> EXT4_BLOCK_SIZE_BITS(sb); - err = ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCK); + err = ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCKS - 1); /* In a multi-transaction truncate, we only make the final * transaction synchronous. @@ -4347,8 +4347,8 @@ int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, start_blk = start >> inode->i_sb->s_blocksize_bits; last_blk = (start + len - 1) >> inode->i_sb->s_blocksize_bits; - if (last_blk >= EXT_MAX_BLOCK) - last_blk = EXT_MAX_BLOCK-1; + if (last_blk >= EXT_MAX_BLOCKS) + last_blk = EXT_MAX_BLOCKS-1; len_blks = ((ext4_lblk_t) last_blk) - start_blk + 1; /* diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c index 2b8304b..f57455a 100644 --- a/fs/ext4/move_extent.c +++ b/fs/ext4/move_extent.c @@ -1002,12 +1002,12 @@ mext_check_arguments(struct inode *orig_inode, return -EINVAL; } - if ((orig_start > EXT_MAX_BLOCK) || - (donor_start > EXT_MAX_BLOCK) || - (*len > EXT_MAX_BLOCK) || - (orig_start + *len > EXT_MAX_BLOCK)) { + if ((orig_start >= EXT_MAX_BLOCKS) || + (donor_start >= EXT_MAX_BLOCKS) || + (*len > EXT_MAX_BLOCKS) || + (orig_start + *len >= EXT_MAX_BLOCKS)) { ext4_debug("ext4 move extent: Can't handle over [%u] blocks " - "[ino:orig %lu, donor %lu]\n", EXT_MAX_BLOCK, + "[ino:orig %lu, donor %lu]\n", EXT_MAX_BLOCKS, orig_inode->i_ino, donor_inode->i_ino); return -EINVAL; } diff --git a/fs/ext4/super.c b/fs/ext4/super.c index cc5c157..9ea71aa 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2243,6 +2243,12 @@ static void ext4_orphan_cleanup(struct super_block *sb, * in the vfs. ext4 inode has 48 bits of i_block in fsblock units, * so that won't be a limiting factor. * + * However there is other limiting factor. We do store extents in the form + * of starting block and length, hence the resulting length of the extent + * covering maximum file size must fit into on-disk format containers as + * well. Given that length is always by 1 unit bigger than max unit (because + * we count 0 as well) we have to lower the s_maxbytes by one fs block. + * * Note, this does *not* consider any metadata overhead for vfs i_blocks. */ static loff_t ext4_max_size(int blkbits, int has_huge_files) @@ -2264,10 +2270,13 @@ static loff_t ext4_max_size(int blkbits, int has_huge_files) upper_limit <<= blkbits; } - /* 32-bit extent-start container, ee_block */ - res = 1LL << 32; + /* + * 32-bit extent-start container, ee_block. We lower the maxbytes + * by one fs block, so ee_len can cover the extent of maximum file + * size + */ + res = (1LL << 32) - 1; res <<= blkbits; - res -= 1; /* Sanity check against vm- & vfs- imposed limits */ if (res > upper_limit) -- cgit v0.10.2 From c03f8aa9abdd517477c2021ea1251939b4da49e6 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Mon, 6 Jun 2011 00:06:52 -0400 Subject: ext4: use FIEMAP_EXTENT_LAST flag for last extent in fiemap Currently we are not marking the extent as the last one (FIEMAP_EXTENT_LAST) if there is a hole at the end of the file. This is because we just do not check for it right now and continue searching for next extent. But at the point we hit the hole at the end of the file, it is too late. This commit adds check for the allocated block in subsequent extent and if there is no more extents (block = EXT_MAX_BLOCKS) just flag the current one as the last one. This behaviour has been spotted unintentionally by 252 xfstest, when the test hangs out, because of wrong loop condition. However on other filesystems (like xfs) it will exit anyway, because we notice the last extent flag and exit. With this patch xfstest 252 does not hang anymore, ext4 fiemap implementation still reports bad extent type in some cases, however this seems to be different issue. Signed-off-by: Lukas Czerner Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h index 4764146..095c36f 100644 --- a/fs/ext4/ext4_extents.h +++ b/fs/ext4/ext4_extents.h @@ -125,7 +125,7 @@ struct ext4_ext_path { * positive retcode - signal for ext4_ext_walk_space(), see below * callback must return valid extent (passed or newly created) */ -typedef int (*ext_prepare_callback)(struct inode *, struct ext4_ext_path *, +typedef int (*ext_prepare_callback)(struct inode *, ext4_lblk_t, struct ext4_ext_cache *, struct ext4_extent *, void *); diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 4157570..f815cc8 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1958,7 +1958,7 @@ static int ext4_ext_walk_space(struct inode *inode, ext4_lblk_t block, err = -EIO; break; } - err = func(inode, path, &cbex, ex, cbdata); + err = func(inode, next, &cbex, ex, cbdata); ext4_ext_drop_refs(path); if (err < 0) @@ -3914,14 +3914,13 @@ int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset, /* * Callback function called for each extent to gather FIEMAP information. */ -static int ext4_ext_fiemap_cb(struct inode *inode, struct ext4_ext_path *path, +static int ext4_ext_fiemap_cb(struct inode *inode, ext4_lblk_t next, struct ext4_ext_cache *newex, struct ext4_extent *ex, void *data) { __u64 logical; __u64 physical; __u64 length; - loff_t size; __u32 flags = 0; int ret = 0; struct fiemap_extent_info *fieinfo = data; @@ -4103,8 +4102,7 @@ found_delayed_extent: if (ex && ext4_ext_is_uninitialized(ex)) flags |= FIEMAP_EXTENT_UNWRITTEN; - size = i_size_read(inode); - if (logical + length >= size) + if (next == EXT_MAX_BLOCKS) flags |= FIEMAP_EXTENT_LAST; ret = fiemap_fill_next_extent(fieinfo, logical, physical, -- cgit v0.10.2 From a9c667f8f0656631ee5438baaf21bf30d5f67375 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Mon, 6 Jun 2011 09:51:52 -0400 Subject: ext4: fixed tracepoints cleanup While creating fixed tracepoints for ext3, basically by porting them from ext4, I found a lot of useless retyping, wrong type usage, useless variable passing and other inconsistencies in the ext4 fixed tracepoint code. This patch cleans the fixed tracepoint code for ext4 and also simplify some of them. Signed-off-by: Lukas Czerner Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a5763e3..e3126c0 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2634,7 +2634,7 @@ static int ext4_writepage(struct page *page, struct buffer_head *page_bufs = NULL; struct inode *inode = page->mapping->host; - trace_ext4_writepage(inode, page); + trace_ext4_writepage(page); size = i_size_read(inode); if (page->index == size >> PAGE_CACHE_SHIFT) len = size & ~PAGE_CACHE_MASK; diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index eb71dd5..6ed859d 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3578,8 +3578,8 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh, free += next - bit; trace_ext4_mballoc_discard(sb, NULL, group, bit, next - bit); - trace_ext4_mb_release_inode_pa(sb, pa->pa_inode, pa, - grp_blk_start + bit, next - bit); + trace_ext4_mb_release_inode_pa(pa, grp_blk_start + bit, + next - bit); mb_free_blocks(pa->pa_inode, e4b, bit, next - bit); bit = next + 1; } @@ -3608,7 +3608,7 @@ ext4_mb_release_group_pa(struct ext4_buddy *e4b, ext4_group_t group; ext4_grpblk_t bit; - trace_ext4_mb_release_group_pa(sb, pa); + trace_ext4_mb_release_group_pa(pa); BUG_ON(pa->pa_deleted == 0); ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit); BUG_ON(group != e4b->bd_group && pa->pa_len != 0); diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index e09592d..5ce2b2f 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -26,7 +26,7 @@ TRACE_EVENT(ext4_free_inode, __field( umode_t, mode ) __field( uid_t, uid ) __field( gid_t, gid ) - __field( blkcnt_t, blocks ) + __field( __u64, blocks ) ), TP_fast_assign( @@ -40,9 +40,8 @@ TRACE_EVENT(ext4_free_inode, TP_printk("dev %d,%d ino %lu mode 0%o uid %u gid %u blocks %llu", MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->mode, __entry->uid, __entry->gid, - (unsigned long long) __entry->blocks) + (unsigned long) __entry->ino, __entry->mode, + __entry->uid, __entry->gid, __entry->blocks) ); TRACE_EVENT(ext4_request_inode, @@ -178,7 +177,7 @@ TRACE_EVENT(ext4_begin_ordered_truncate, TP_printk("dev %d,%d ino %lu new_size %lld", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - (long long) __entry->new_size) + __entry->new_size) ); DECLARE_EVENT_CLASS(ext4__write_begin, @@ -204,7 +203,7 @@ DECLARE_EVENT_CLASS(ext4__write_begin, __entry->flags = flags; ), - TP_printk("dev %d,%d ino %lu pos %llu len %u flags %u", + TP_printk("dev %d,%d ino %lu pos %lld len %u flags %u", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, __entry->pos, __entry->len, __entry->flags) @@ -248,7 +247,7 @@ DECLARE_EVENT_CLASS(ext4__write_end, __entry->copied = copied; ), - TP_printk("dev %d,%d ino %lu pos %llu len %u copied %u", + TP_printk("dev %d,%d ino %lu pos %lld len %u copied %u", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, __entry->pos, __entry->len, __entry->copied) @@ -286,29 +285,6 @@ DEFINE_EVENT(ext4__write_end, ext4_da_write_end, TP_ARGS(inode, pos, len, copied) ); -TRACE_EVENT(ext4_writepage, - TP_PROTO(struct inode *inode, struct page *page), - - TP_ARGS(inode, page), - - TP_STRUCT__entry( - __field( dev_t, dev ) - __field( ino_t, ino ) - __field( pgoff_t, index ) - - ), - - TP_fast_assign( - __entry->dev = inode->i_sb->s_dev; - __entry->ino = inode->i_ino; - __entry->index = page->index; - ), - - TP_printk("dev %d,%d ino %lu page_index %lu", - MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, __entry->index) -); - TRACE_EVENT(ext4_da_writepages, TP_PROTO(struct inode *inode, struct writeback_control *wbc), @@ -341,7 +317,7 @@ TRACE_EVENT(ext4_da_writepages, ), TP_printk("dev %d,%d ino %lu nr_to_write %ld pages_skipped %ld " - "range_start %llu range_end %llu sync_mode %d" + "range_start %lld range_end %lld sync_mode %d" "for_kupdate %d range_cyclic %d writeback_index %lu", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, __entry->nr_to_write, @@ -449,7 +425,14 @@ DECLARE_EVENT_CLASS(ext4__page_op, TP_printk("dev %d,%d ino %lu page_index %lu", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - __entry->index) + (unsigned long) __entry->index) +); + +DEFINE_EVENT(ext4__page_op, ext4_writepage, + + TP_PROTO(struct page *page), + + TP_ARGS(page) ); DEFINE_EVENT(ext4__page_op, ext4_readpage, @@ -489,7 +472,7 @@ TRACE_EVENT(ext4_invalidatepage, TP_printk("dev %d,%d ino %lu page_index %lu offset %lu", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - __entry->index, __entry->offset) + (unsigned long) __entry->index, __entry->offset) ); TRACE_EVENT(ext4_discard_blocks, @@ -562,12 +545,10 @@ DEFINE_EVENT(ext4__mb_new_pa, ext4_mb_new_group_pa, ); TRACE_EVENT(ext4_mb_release_inode_pa, - TP_PROTO(struct super_block *sb, - struct inode *inode, - struct ext4_prealloc_space *pa, + TP_PROTO(struct ext4_prealloc_space *pa, unsigned long long block, unsigned int count), - TP_ARGS(sb, inode, pa, block, count), + TP_ARGS(pa, block, count), TP_STRUCT__entry( __field( dev_t, dev ) @@ -578,8 +559,8 @@ TRACE_EVENT(ext4_mb_release_inode_pa, ), TP_fast_assign( - __entry->dev = sb->s_dev; - __entry->ino = inode->i_ino; + __entry->dev = pa->pa_inode->i_sb->s_dev; + __entry->ino = pa->pa_inode->i_ino; __entry->block = block; __entry->count = count; ), @@ -591,10 +572,9 @@ TRACE_EVENT(ext4_mb_release_inode_pa, ); TRACE_EVENT(ext4_mb_release_group_pa, - TP_PROTO(struct super_block *sb, - struct ext4_prealloc_space *pa), + TP_PROTO(struct ext4_prealloc_space *pa), - TP_ARGS(sb, pa), + TP_ARGS(pa), TP_STRUCT__entry( __field( dev_t, dev ) @@ -604,7 +584,7 @@ TRACE_EVENT(ext4_mb_release_group_pa, ), TP_fast_assign( - __entry->dev = sb->s_dev; + __entry->dev = pa->pa_inode->i_sb->s_dev; __entry->pa_pstart = pa->pa_pstart; __entry->pa_len = pa->pa_len; ), @@ -666,10 +646,10 @@ TRACE_EVENT(ext4_request_blocks, __field( ino_t, ino ) __field( unsigned int, flags ) __field( unsigned int, len ) - __field( __u64, logical ) + __field( __u32, logical ) + __field( __u32, lleft ) + __field( __u32, lright ) __field( __u64, goal ) - __field( __u64, lleft ) - __field( __u64, lright ) __field( __u64, pleft ) __field( __u64, pright ) ), @@ -687,17 +667,13 @@ TRACE_EVENT(ext4_request_blocks, __entry->pright = ar->pright; ), - TP_printk("dev %d,%d ino %lu flags %u len %u lblk %llu goal %llu " - "lleft %llu lright %llu pleft %llu pright %llu ", + TP_printk("dev %d,%d ino %lu flags %u len %u lblk %u goal %llu " + "lleft %u lright %u pleft %llu pright %llu ", MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->flags, __entry->len, - (unsigned long long) __entry->logical, - (unsigned long long) __entry->goal, - (unsigned long long) __entry->lleft, - (unsigned long long) __entry->lright, - (unsigned long long) __entry->pleft, - (unsigned long long) __entry->pright) + (unsigned long) __entry->ino, __entry->flags, + __entry->len, __entry->logical, __entry->goal, + __entry->lleft, __entry->lright, __entry->pleft, + __entry->pright) ); TRACE_EVENT(ext4_allocate_blocks, @@ -711,10 +687,10 @@ TRACE_EVENT(ext4_allocate_blocks, __field( __u64, block ) __field( unsigned int, flags ) __field( unsigned int, len ) - __field( __u64, logical ) + __field( __u32, logical ) + __field( __u32, lleft ) + __field( __u32, lright ) __field( __u64, goal ) - __field( __u64, lleft ) - __field( __u64, lright ) __field( __u64, pleft ) __field( __u64, pright ) ), @@ -733,17 +709,13 @@ TRACE_EVENT(ext4_allocate_blocks, __entry->pright = ar->pright; ), - TP_printk("dev %d,%d ino %lu flags %u len %u block %llu lblk %llu " - "goal %llu lleft %llu lright %llu pleft %llu pright %llu", + TP_printk("dev %d,%d ino %lu flags %u len %u block %llu lblk %u " + "goal %llu lleft %u lright %u pleft %llu pright %llu", MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - __entry->flags, __entry->len, __entry->block, - (unsigned long long) __entry->logical, - (unsigned long long) __entry->goal, - (unsigned long long) __entry->lleft, - (unsigned long long) __entry->lright, - (unsigned long long) __entry->pleft, - (unsigned long long) __entry->pright) + (unsigned long) __entry->ino, __entry->flags, + __entry->len, __entry->block, __entry->logical, + __entry->goal, __entry->lleft, __entry->lright, + __entry->pleft, __entry->pright) ); TRACE_EVENT(ext4_free_blocks, @@ -755,10 +727,10 @@ TRACE_EVENT(ext4_free_blocks, TP_STRUCT__entry( __field( dev_t, dev ) __field( ino_t, ino ) - __field( umode_t, mode ) + __field( umode_t, mode ) __field( __u64, block ) __field( unsigned long, count ) - __field( int, flags ) + __field( int, flags ) ), TP_fast_assign( @@ -798,7 +770,7 @@ TRACE_EVENT(ext4_sync_file_enter, __entry->parent = dentry->d_parent->d_inode->i_ino; ), - TP_printk("dev %d,%d ino %ld parent %ld datasync %d ", + TP_printk("dev %d,%d ino %lu parent %lu datasync %d ", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, (unsigned long) __entry->parent, __entry->datasync) @@ -821,7 +793,7 @@ TRACE_EVENT(ext4_sync_file_exit, __entry->dev = inode->i_sb->s_dev; ), - TP_printk("dev %d,%d ino %ld ret %d", + TP_printk("dev %d,%d ino %lu ret %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, __entry->ret) @@ -1005,7 +977,7 @@ DECLARE_EVENT_CLASS(ext4__mballoc, __entry->result_len = len; ), - TP_printk("dev %d,%d inode %lu extent %u/%d/%u ", + TP_printk("dev %d,%d inode %lu extent %u/%d/%d ", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, __entry->result_group, __entry->result_start, @@ -1093,7 +1065,7 @@ TRACE_EVENT(ext4_da_update_reserve_space, "allocated_meta_blocks %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - __entry->mode, (unsigned long long) __entry->i_blocks, + __entry->mode, __entry->i_blocks, __entry->used_blocks, __entry->reserved_data_blocks, __entry->reserved_meta_blocks, __entry->allocated_meta_blocks) ); @@ -1127,7 +1099,7 @@ TRACE_EVENT(ext4_da_reserve_space, "reserved_data_blocks %d reserved_meta_blocks %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - __entry->mode, (unsigned long long) __entry->i_blocks, + __entry->mode, __entry->i_blocks, __entry->md_needed, __entry->reserved_data_blocks, __entry->reserved_meta_blocks) ); @@ -1164,7 +1136,7 @@ TRACE_EVENT(ext4_da_release_space, "allocated_meta_blocks %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - __entry->mode, (unsigned long long) __entry->i_blocks, + __entry->mode, __entry->i_blocks, __entry->freed_blocks, __entry->reserved_data_blocks, __entry->reserved_meta_blocks, __entry->allocated_meta_blocks) ); @@ -1239,14 +1211,15 @@ TRACE_EVENT(ext4_direct_IO_enter, __entry->rw = rw; ), - TP_printk("dev %d,%d ino %lu pos %llu len %lu rw %d", + TP_printk("dev %d,%d ino %lu pos %lld len %lu rw %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - (unsigned long long) __entry->pos, __entry->len, __entry->rw) + __entry->pos, __entry->len, __entry->rw) ); TRACE_EVENT(ext4_direct_IO_exit, - TP_PROTO(struct inode *inode, loff_t offset, unsigned long len, int rw, int ret), + TP_PROTO(struct inode *inode, loff_t offset, unsigned long len, + int rw, int ret), TP_ARGS(inode, offset, len, rw, ret), @@ -1268,10 +1241,10 @@ TRACE_EVENT(ext4_direct_IO_exit, __entry->ret = ret; ), - TP_printk("dev %d,%d ino %lu pos %llu len %lu rw %d ret %d", + TP_printk("dev %d,%d ino %lu pos %lld len %lu rw %d ret %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - (unsigned long long) __entry->pos, __entry->len, + __entry->pos, __entry->len, __entry->rw, __entry->ret) ); @@ -1296,15 +1269,15 @@ TRACE_EVENT(ext4_fallocate_enter, __entry->mode = mode; ), - TP_printk("dev %d,%d ino %ld pos %llu len %llu mode %d", + TP_printk("dev %d,%d ino %lu pos %lld len %lld mode %d", MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, - (unsigned long long) __entry->pos, - (unsigned long long) __entry->len, __entry->mode) + (unsigned long) __entry->ino, __entry->pos, + __entry->len, __entry->mode) ); TRACE_EVENT(ext4_fallocate_exit, - TP_PROTO(struct inode *inode, loff_t offset, unsigned int max_blocks, int ret), + TP_PROTO(struct inode *inode, loff_t offset, + unsigned int max_blocks, int ret), TP_ARGS(inode, offset, max_blocks, ret), @@ -1312,7 +1285,7 @@ TRACE_EVENT(ext4_fallocate_exit, __field( ino_t, ino ) __field( dev_t, dev ) __field( loff_t, pos ) - __field( unsigned, blocks ) + __field( unsigned int, blocks ) __field( int, ret ) ), @@ -1324,10 +1297,10 @@ TRACE_EVENT(ext4_fallocate_exit, __entry->ret = ret; ), - TP_printk("dev %d,%d ino %ld pos %llu blocks %d ret %d", + TP_printk("dev %d,%d ino %lu pos %lld blocks %u ret %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - (unsigned long long) __entry->pos, __entry->blocks, + __entry->pos, __entry->blocks, __entry->ret) ); @@ -1350,7 +1323,7 @@ TRACE_EVENT(ext4_unlink_enter, __entry->dev = dentry->d_inode->i_sb->s_dev; ), - TP_printk("dev %d,%d ino %ld size %lld parent %ld", + TP_printk("dev %d,%d ino %lu size %lld parent %lu", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, __entry->size, (unsigned long) __entry->parent) @@ -1373,7 +1346,7 @@ TRACE_EVENT(ext4_unlink_exit, __entry->ret = ret; ), - TP_printk("dev %d,%d ino %ld ret %d", + TP_printk("dev %d,%d ino %lu ret %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, __entry->ret) @@ -1387,7 +1360,7 @@ DECLARE_EVENT_CLASS(ext4__truncate, TP_STRUCT__entry( __field( ino_t, ino ) __field( dev_t, dev ) - __field( blkcnt_t, blocks ) + __field( __u64, blocks ) ), TP_fast_assign( @@ -1396,9 +1369,9 @@ DECLARE_EVENT_CLASS(ext4__truncate, __entry->blocks = inode->i_blocks; ), - TP_printk("dev %d,%d ino %lu blocks %lu", + TP_printk("dev %d,%d ino %lu blocks %llu", MAJOR(__entry->dev), MINOR(__entry->dev), - (unsigned long) __entry->ino, (unsigned long) __entry->blocks) + (unsigned long) __entry->ino, __entry->blocks) ); DEFINE_EVENT(ext4__truncate, ext4_truncate_enter, @@ -1417,7 +1390,7 @@ DEFINE_EVENT(ext4__truncate, ext4_truncate_exit, DECLARE_EVENT_CLASS(ext4__map_blocks_enter, TP_PROTO(struct inode *inode, ext4_lblk_t lblk, - unsigned len, unsigned flags), + unsigned int len, unsigned int flags), TP_ARGS(inode, lblk, len, flags), @@ -1425,8 +1398,8 @@ DECLARE_EVENT_CLASS(ext4__map_blocks_enter, __field( ino_t, ino ) __field( dev_t, dev ) __field( ext4_lblk_t, lblk ) - __field( unsigned, len ) - __field( unsigned, flags ) + __field( unsigned int, len ) + __field( unsigned int, flags ) ), TP_fast_assign( @@ -1440,7 +1413,7 @@ DECLARE_EVENT_CLASS(ext4__map_blocks_enter, TP_printk("dev %d,%d ino %lu lblk %u len %u flags %u", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - (unsigned) __entry->lblk, __entry->len, __entry->flags) + __entry->lblk, __entry->len, __entry->flags) ); DEFINE_EVENT(ext4__map_blocks_enter, ext4_ext_map_blocks_enter, @@ -1459,7 +1432,7 @@ DEFINE_EVENT(ext4__map_blocks_enter, ext4_ind_map_blocks_enter, DECLARE_EVENT_CLASS(ext4__map_blocks_exit, TP_PROTO(struct inode *inode, ext4_lblk_t lblk, - ext4_fsblk_t pblk, unsigned len, int ret), + ext4_fsblk_t pblk, unsigned int len, int ret), TP_ARGS(inode, lblk, pblk, len, ret), @@ -1468,7 +1441,7 @@ DECLARE_EVENT_CLASS(ext4__map_blocks_exit, __field( dev_t, dev ) __field( ext4_lblk_t, lblk ) __field( ext4_fsblk_t, pblk ) - __field( unsigned, len ) + __field( unsigned int, len ) __field( int, ret ) ), @@ -1484,7 +1457,7 @@ DECLARE_EVENT_CLASS(ext4__map_blocks_exit, TP_printk("dev %d,%d ino %lu lblk %u pblk %llu len %u ret %d", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - (unsigned) __entry->lblk, (unsigned long long) __entry->pblk, + __entry->lblk, __entry->pblk, __entry->len, __entry->ret) ); @@ -1524,7 +1497,7 @@ TRACE_EVENT(ext4_ext_load_extent, TP_printk("dev %d,%d ino %lu lblk %u pblk %llu", MAJOR(__entry->dev), MINOR(__entry->dev), (unsigned long) __entry->ino, - (unsigned) __entry->lblk, (unsigned long long) __entry->pblk) + __entry->lblk, __entry->pblk) ); TRACE_EVENT(ext4_load_inode, -- cgit v0.10.2 From b084f598df36b62dfae83c10ed17f0b66b50f442 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 31 May 2011 12:24:58 -0400 Subject: nfsd: fix dependency of nfsd on auth_rpcgss Commit b0b0c0a26e84 "nfsd: add proc file listing kernel's gss_krb5 enctypes" added an nunnecessary dependency of nfsd on the auth_rpcgss module. It's a little ad hoc, but since the only piece of information nfsd needs from rpcsec_gss_krb5 is a single static string, one solution is just to share it with an include file. Cc: stable@kernel.org Reported-by: Michael Guntsche Cc: Kevin Coffman Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index 1f5eae4..2b1449d 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "idmap.h" #include "nfsd.h" @@ -189,18 +190,10 @@ static struct file_operations export_features_operations = { .release = single_release, }; -#ifdef CONFIG_SUNRPC_GSS +#if defined(CONFIG_SUNRPC_GSS) || defined(CONFIG_SUNRPC_GSS_MODULE) static int supported_enctypes_show(struct seq_file *m, void *v) { - struct gss_api_mech *k5mech; - - k5mech = gss_mech_get_by_name("krb5"); - if (k5mech == NULL) - goto out; - if (k5mech->gm_upcall_enctypes != NULL) - seq_printf(m, k5mech->gm_upcall_enctypes); - gss_mech_put(k5mech); -out: + seq_printf(m, KRB5_SUPPORTED_ENCTYPES); return 0; } @@ -215,7 +208,7 @@ static struct file_operations supported_enctypes_ops = { .llseek = seq_lseek, .release = single_release, }; -#endif /* CONFIG_SUNRPC_GSS */ +#endif /* CONFIG_SUNRPC_GSS or CONFIG_SUNRPC_GSS_MODULE */ extern int nfsd_pool_stats_open(struct inode *inode, struct file *file); extern int nfsd_pool_stats_release(struct inode *inode, struct file *file); @@ -1427,9 +1420,9 @@ static int nfsd_fill_super(struct super_block * sb, void * data, int silent) [NFSD_Versions] = {"versions", &transaction_ops, S_IWUSR|S_IRUSR}, [NFSD_Ports] = {"portlist", &transaction_ops, S_IWUSR|S_IRUGO}, [NFSD_MaxBlkSize] = {"max_block_size", &transaction_ops, S_IWUSR|S_IRUGO}, -#ifdef CONFIG_SUNRPC_GSS +#if defined(CONFIG_SUNRPC_GSS) || defined(CONFIG_SUNRPC_GSS_MODULE) [NFSD_SupportedEnctypes] = {"supported_krb5_enctypes", &supported_enctypes_ops, S_IRUGO}, -#endif /* CONFIG_SUNRPC_GSS */ +#endif /* CONFIG_SUNRPC_GSS or CONFIG_SUNRPC_GSS_MODULE */ #ifdef CONFIG_NFSD_V4 [NFSD_Leasetime] = {"nfsv4leasetime", &transaction_ops, S_IWUSR|S_IRUSR}, [NFSD_Gracetime] = {"nfsv4gracetime", &transaction_ops, S_IWUSR|S_IRUSR}, diff --git a/include/linux/sunrpc/gss_krb5_enctypes.h b/include/linux/sunrpc/gss_krb5_enctypes.h new file mode 100644 index 0000000..ec6234e --- /dev/null +++ b/include/linux/sunrpc/gss_krb5_enctypes.h @@ -0,0 +1,4 @@ +/* + * Dumb way to share this static piece of information with nfsd + */ +#define KRB5_SUPPORTED_ENCTYPES "18,17,16,23,3,1,2" diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c index 0a9a2ec..c3b7533 100644 --- a/net/sunrpc/auth_gss/gss_krb5_mech.c +++ b/net/sunrpc/auth_gss/gss_krb5_mech.c @@ -43,6 +43,7 @@ #include #include #include +#include #ifdef RPC_DEBUG # define RPCDBG_FACILITY RPCDBG_AUTH @@ -750,7 +751,7 @@ static struct gss_api_mech gss_kerberos_mech = { .gm_ops = &gss_kerberos_ops, .gm_pf_num = ARRAY_SIZE(gss_kerberos_pfs), .gm_pfs = gss_kerberos_pfs, - .gm_upcall_enctypes = "18,17,16,23,3,1,2", + .gm_upcall_enctypes = KRB5_SUPPORTED_ENCTYPES, }; static int __init init_kerberos_module(void) -- cgit v0.10.2 From be1f4084b4824301e640e81d63b6275cd99ee6a1 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 6 Jun 2011 11:22:17 -0700 Subject: nfsd: v4 support requires CRYPTO nfsd V4 support uses crypto interfaces, so select CRYPTO to fix build errors in 2.6.39: ERROR: "crypto_destroy_tfm" [fs/nfsd/nfsd.ko] undefined! ERROR: "crypto_alloc_base" [fs/nfsd/nfsd.ko] undefined! Reported-by: Wakko Warner Signed-off-by: Randy Dunlap Cc: stable@kernel.org Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig index 18b3e89..fbb2a5e 100644 --- a/fs/nfsd/Kconfig +++ b/fs/nfsd/Kconfig @@ -82,6 +82,7 @@ config NFSD_V4 select NFSD_V3 select FS_POSIX_ACL select SUNRPC_GSS + select CRYPTO help This option enables support in your system's NFS server for version 4 of the NFS protocol (RFC 3530). -- cgit v0.10.2 From 7d751f6f8c679f51b73d01a1b5269347a929004c Mon Sep 17 00:00:00 2001 From: Casey Bodley Date: Fri, 3 Jun 2011 12:21:23 -0400 Subject: nfsd: link returns nfserr_delay when breaking lease fix for commit 4795bb37effb7b8fe77e2d2034545d062d3788a8, nfsd: break lease on unlink, link, and rename if the LINK operation breaks a delegation, it returns NFS4ERR_NOENT (which is not a valid error in rfc 5661) instead of NFS4ERR_DELAY. the return value of nfsd_break_lease() in nfsd_link() must be converted from host_err to err Signed-off-by: Casey Bodley Cc: stable@kernel.org Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index d571827..f3fb61b 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1660,8 +1660,10 @@ nfsd_link(struct svc_rqst *rqstp, struct svc_fh *ffhp, if (!dold->d_inode) goto out_drop_write; host_err = nfsd_break_lease(dold->d_inode); - if (host_err) + if (host_err) { + err = nfserrno(host_err); goto out_drop_write; + } host_err = vfs_link(dold, dirp, dnew); if (!host_err) { err = nfserrno(commit_metadata(ffhp)); -- cgit v0.10.2 From c8fb13d04ad0d08772f637bee873e620fcc064c2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 27 May 2011 13:56:12 -0700 Subject: OMAP: PM debug: fix section mismatch warnings WARNING: arch/arm/mach-omap2/built-in.o(.text+0x423c): Section mismatch in reference from the function pm_dbg_regset_init() to the function .init.text:pm_dbg_init() The function pm_dbg_regset_init() references the function __init pm_dbg_init(). This is often because pm_dbg_regset_init lacks a __init annotation or the annotation of pm_dbg_init is wrong. Signed-off-by: Russell King Signed-off-by: Kevin Hilman diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index a5a83b3..e01da45 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -189,7 +189,7 @@ static struct dentry *pm_dbg_dir; static int pm_dbg_init_done; -static int __init pm_dbg_init(void); +static int pm_dbg_init(void); enum { DEBUG_FILE_COUNTERS = 0, @@ -595,7 +595,7 @@ static int option_set(void *data, u64 val) DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); -static int __init pm_dbg_init(void) +static int pm_dbg_init(void) { int i; struct dentry *d; -- cgit v0.10.2 From 345f79b3de7f6d651e4dba794af7c7303bdfd649 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 31 May 2011 16:08:09 -0700 Subject: OMAP: PM: omap_device: fix device power domain callbacks After commit 4d27e9dcff00a6425d779b065ec8892e4f391661 (PM: Make power domain callbacks take precedence over subsystem ones), the power domain callbacks need to call the driver callbacks instead of relying on the default subsystem (in this case, platform_bus) to handle the driver callbacks. Validated on 3430/n900, 3530/Overo. Signed-off-by: Kevin Hilman diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index a37b8eb..49fc0df 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -84,6 +84,7 @@ #include #include #include +#include #include #include @@ -539,20 +540,34 @@ int omap_early_device_register(struct omap_device *od) static int _od_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + int ret; + + ret = pm_generic_runtime_suspend(dev); + + if (!ret) + omap_device_idle(pdev); + + return ret; +} - return omap_device_idle(pdev); +static int _od_runtime_idle(struct device *dev) +{ + return pm_generic_runtime_idle(dev); } static int _od_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - return omap_device_enable(pdev); + omap_device_enable(pdev); + + return pm_generic_runtime_resume(dev); } static struct dev_power_domain omap_device_power_domain = { .ops = { .runtime_suspend = _od_runtime_suspend, + .runtime_idle = _od_runtime_idle, .runtime_resume = _od_runtime_resume, USE_PLATFORM_PM_SLEEP_OPS } -- cgit v0.10.2 From 942fd4225f72826b31d893582b6ae7e172bb3202 Mon Sep 17 00:00:00 2001 From: Austin Zhang Date: Sat, 28 May 2011 02:03:47 +0800 Subject: HID: hid-multitouch: add support for Chunghwa multi-touch panel Added Chunghwa hid multitouch panel support into hid-multitouch. Signed-off-by: Austin Zhang Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 67d2a75..36ca465 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -305,6 +305,7 @@ config HID_MULTITOUCH - 3M PCT touch screens - ActionStar dual touch panels - Cando dual touch panels + - Chunghwa panels - CVTouch panels - Cypress TrueTouch panels - Elo TouchSystems IntelliTouch Plus panels diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index c957c4b..f7440e8 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1359,6 +1359,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) }, { HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 2bbaad7..aecb5a4 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -173,6 +173,9 @@ #define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d #define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618 +#define USB_VENDOR_ID_CHUNGHWAT 0x2247 +#define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001 + #define USB_VENDOR_ID_CIDC 0x1677 #define USB_VENDOR_ID_CMEDIA 0x0d8c diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index ecd4d2d..8bc32a0 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -593,6 +593,11 @@ static const struct hid_device_id mt_devices[] = { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) }, + /* Chunghwa Telecom touch panels */ + { .driver_data = MT_CLS_DEFAULT, + HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, + USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) }, + /* CVTouch panels */ { .driver_data = MT_CLS_DEFAULT, HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, -- cgit v0.10.2 From c2f019713df67e09d32e1b3c12f147a83a579d25 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 1 Jun 2011 10:59:13 -0700 Subject: HID: MAINTAINERS: Update USB HID/HIDBP DRIVERS pattern It was moved by commit 1a978c50c6cf ("HID: Move hiddev.txt to the new Documentation/hid directory") so update the MAINTAINERS pattern too. cc: Jiri Kosina cc: Alan Ott Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina diff --git a/MAINTAINERS b/MAINTAINERS index 0b41524..8bd7cae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6423,7 +6423,7 @@ M: Jiri Kosina L: linux-usb@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained -F: Documentation/usb/hiddev.txt +F: Documentation/hid/hiddev.txt F: drivers/hid/usbhid/ USB ISP116X DRIVER -- cgit v0.10.2 From af99d6f0037d970084b03d9690f50e34d6f70dae Mon Sep 17 00:00:00 2001 From: Lennart Sorensen Date: Wed, 1 Jun 2011 14:38:41 -0400 Subject: serial: ioremap warning fix for jsm driver. I saw a warning about ioremap from the jsm driver on a system which looked like this: resource map sanity check conflict: 0xe0200800 0xe02017ff 0xe0200800 0xe0200fff 0000:01:08.0 Turns out the warning is valid. The jsm driver has been asking to ioremap 0x1000 forever, but in fact only 8 port chips have 0x1000 bytes of memory. 4 port chips have 0x800 and 2 port chips have 0x400 according to the data sheet. It makes more sense to map the size of the region rather than a hard coded value. If you happen to have the region legitimately mapped to a base address that is not 4K aligned, ioremap complains otherwise. Signed-off-by: Len Sorensen Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 18f5484..96da178 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -125,7 +125,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device brd->bd_uart_offset = 0x200; brd->bd_dividend = 921600; - brd->re_map_membase = ioremap(brd->membase, 0x1000); + brd->re_map_membase = ioremap(brd->membase, pci_resource_len(pdev, 0)); if (!brd->re_map_membase) { dev_err(&pdev->dev, "card has no PCI Memory resources, " -- cgit v0.10.2 From 470f22975448a65a1084a6f0721fa5df15323f02 Mon Sep 17 00:00:00 2001 From: Boojin Kim Date: Fri, 27 May 2011 19:04:03 -0700 Subject: ARM: SAMSUNG: serial: Fix on handling of one clock source for UART This patch fixes the way of comparison for handling of two or more clock sources for UART. For example, if just only one clock source is defined even though there are two clock sources for UART, the serial driver does not set proper clock up. Of course, it is problem. So this patch changes the condition of comparison to avoid useless setup clock and adds a flag 'NO_NEED_CHECK_CLKSRC' which means selection of source clock is not required. In addition, since the Exynos4210 has only one clock source for UART this patch adds the flag into its common_init_uarts(). Signed-off-by: Boojin Kim Signed-off-by: Kukjin Kim Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos4/init.c index cf91f50..a8a83e3 100644 --- a/arch/arm/mach-exynos4/init.c +++ b/arch/arm/mach-exynos4/init.c @@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) tcfg->clocks = exynos4_serial_clocks; tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); } + tcfg->flags |= NO_NEED_CHECK_CLKSRC; } s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index c151c5f..116edfe 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -224,6 +224,8 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) +#define NO_NEED_CHECK_CLKSRC 1 + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c index fb2619f..dd194dc 100644 --- a/drivers/tty/serial/s5pv210.c +++ b/drivers/tty/serial/s5pv210.c @@ -30,7 +30,7 @@ static int s5pv210_serial_setsource(struct uart_port *port, struct s3c2410_uartcfg *cfg = port->dev->platform_data; unsigned long ucon = rd_regl(port, S3C2410_UCON); - if ((cfg->clocks_size) == 1) + if (cfg->flags & NO_NEED_CHECK_CLKSRC) return 0; if (strcmp(clk->name, "pclk") == 0) @@ -55,7 +55,7 @@ static int s5pv210_serial_getsource(struct uart_port *port, clk->divisor = 1; - if ((cfg->clocks_size) == 1) + if (cfg->flags & NO_NEED_CHECK_CLKSRC) return 0; switch (ucon & S5PV210_UCON_CLKMASK) { -- cgit v0.10.2 From 1798ca13bfae8cc7c0ef82c034c3c4951ecaeb88 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 24 May 2011 12:35:48 +0100 Subject: 8250_pci: Fix missing const from merges Signed-off-by: Alan Cox Signed-off-by: Antony Pavlov Signed-off-by: Borislav Petkov Signed-off-by: Vasily Averin Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index d7dc513..f41b425 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -973,7 +973,7 @@ ce4100_serial_setup(struct serial_private *priv, static int pci_omegapci_setup(struct serial_private *priv, - struct pciserial_board *board, + const struct pciserial_board *board, struct uart_port *port, int idx) { return setup_port(priv, port, 2, idx * 8, 0); -- cgit v0.10.2 From cb01ece3ea5dec16ac7bab30069c7736b59f7dea Mon Sep 17 00:00:00 2001 From: "leitao@linux.vnet.ibm.com" Date: Thu, 26 May 2011 11:18:39 -0300 Subject: 8250: Fix capabilities when changing the port type When changing the port type, the capabilities flags should be changed also, otherwise the capabilities will not correspond to the port type, which make set_sleep() crash on rmmod. This patch just assign the correct capabilites when the port changes. Signed-off-by: Breno Leitao CC: Michael Reed Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index b40f7b9..b4129f5 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -3318,6 +3318,7 @@ void serial8250_unregister_port(int line) uart->port.flags &= ~UPF_BOOT_AUTOCONF; uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; + uart->capabilities = uart_config[uart->port.type].flags; uart_add_one_port(&serial8250_reg, &uart->port); } else { uart->port.dev = NULL; -- cgit v0.10.2 From 5daf538a0313509ecdeb5b7a61257f39881f9361 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 22 May 2011 17:38:02 -0700 Subject: firmware: fix GOOGLE_SMI kconfig dependency warning Is it meaningful/useful to enable EFI_VARS but not EFI? That's what GOOGLE_SMI does. Make it enable EFI also. Fixes this kconfig dependency warning: warning: (GOOGLE_SMI) selects EFI_VARS which has unmet direct dependencies (EFI) Signed-off-by: Randy Dunlap Acked-by: Mike Waychison Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig index 87096b6..2f21b0b 100644 --- a/drivers/firmware/google/Kconfig +++ b/drivers/firmware/google/Kconfig @@ -13,6 +13,7 @@ menu "Google Firmware Drivers" config GOOGLE_SMI tristate "SMI interface for Google platforms" depends on ACPI && DMI + select EFI select EFI_VARS help Say Y here if you want to enable SMI callbacks for Google -- cgit v0.10.2 From 7316a9f2a94c14e66e9421a777dffc509a2fe0e3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 23 May 2011 16:45:32 -0400 Subject: st_kim: Handle case of no device found for ID 0 Running ktest.pl, I hit this bug: [ 19.780654] BUG: unable to handle kernel NULL pointer dereference at 0000000c [ 19.780660] IP: [] dev_get_drvdata+0xc/0x46 [ 19.780669] *pdpt = 0000000031daf001 *pde = 0000000000000000 [ 19.780673] Oops: 0000 [#1] SMP [ 19.780680] Dumping ftrace buffer:^M [ 19.780685] (ftrace buffer empty) [ 19.780687] Modules linked in: ide_pci_generic firewire_ohci firewire_core evbug crc_itu_t e1000 ide_core i2c_i801 iTCO_wdt [ 19.780697] [ 19.780700] Pid: 346, comm: v4l_id Not tainted 2.6.39-test-02740-gcaebc16-dirty #4 /DG965MQ [ 19.780706] EIP: 0060:[] EFLAGS: 00010202 CPU: 0 [ 19.780709] EIP is at dev_get_drvdata+0xc/0x46 [ 19.780712] EAX: 00000008 EBX: f1e37da4 ECX: 00000000 EDX: 00000000 [ 19.780715] ESI: f1c3f200 EDI: c33ec95c EBP: f1e37d80 ESP: f1e37d80 [ 19.780718] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 19.780721] Process v4l_id (pid: 346, ti=f1e36000 task=f2bc2a60 task.ti=f1e36000) [ 19.780723] Stack: [ 19.780725] f1e37d8c c117d395 c33ec93c f1e37db4 c117a0f9 00000002 00000000 c1725e54 [ 19.780732] 00000001 00000007 f2918c90 f1c3f200 c33ec95c f1e37dd4 c1789d3d 22222222 [ 19.780740] 22222222 22222222 f2918c90 f1c3f200 f29194f4 f1e37de8 c178d5c4 c1725e54 [ 19.780747] Call Trace: [ 19.780752] [] st_kim_ref+0x28/0x41 [ 19.780756] [] st_register+0x29/0x562 [ 19.780761] [] ? v4l2_open+0x111/0x1e3 [ 19.780766] [] fmc_prepare+0x97/0x424 [ 19.780770] [] fm_v4l2_fops_open+0x70/0x106 [ 19.780773] [] ? v4l2_open+0x111/0x1e3 [ 19.780777] [] v4l2_open+0x158/0x1e3 [ 19.780782] [] chrdev_open+0x22c/0x276 [ 19.780787] [] __dentry_open+0x35c/0x581 [ 19.780792] [] nameidata_to_filp+0x7c/0x96 [ 19.780795] [] ? cdev_put+0x57/0x57 [ 19.780800] [] do_last+0x743/0x9d4 [ 19.780804] [] ? path_init+0x1ee/0x596 [ 19.780808] [] path_openat+0x10c/0x597 [ 19.780813] [] ? trace_hardirqs_off+0x27/0x37 [ 19.780817] [] ? local_clock+0x78/0xc7 [ 19.780821] [] do_filp_open+0x39/0xc2 [ 19.780827] [] ? _raw_spin_unlock+0x4c/0x5d^M [ 19.780831] [] ? alloc_fd+0x19e/0x1b7 [ 19.780836] [] do_sys_open+0xb7/0x1bd [ 19.780840] [] ? sys_munmap+0x78/0x8d [ 19.780844] [] sys_open+0x36/0x58 [ 19.780849] [] sysenter_do_call+0x12/0x38 [ 19.780852] Code: d8 2f 20 c3 01 83 15 dc 2f 20 c3 00 f0 ff 00 83 05 e0 2f 20 c3 01 83 15 e4 2f 20 c3 00 5d c3 55 89 e5 3e 8d 74 26 00 85 c0 74 28 <8b> 40 04 83 05 e8 2f 20 c3 01 83 15 ec 2f 20 c3 00 85 c0 74 13 ^M [ 19.780889] EIP: [] dev_get_drvdata+0xc/0x46 SS:ESP 0068:f1e37d80 [ 19.780894] CR2: 000000000000000c [ 19.780898] ---[ end trace e7d1d0f6a2d1d390 ]--- The id of 0 passed to st_kim_ref() found no device, keeping pdev null, and causing pdev->dev cause a NULL pointer dereference. After having st_kim_ref() check for NULL, the st_unregister() function needed to be updated to handle the case that st_gdata was not set by the st_kim_ref(). Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index f91f82e..54c91ff 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -605,7 +605,7 @@ long st_unregister(struct st_proto_s *proto) pr_debug("%s: %d ", __func__, proto->chnl_id); st_kim_ref(&st_gdata, 0); - if (proto->chnl_id >= ST_MAX_CHANNELS) { + if (!st_gdata || proto->chnl_id >= ST_MAX_CHANNELS) { pr_err(" chnl_id %d not supported", proto->chnl_id); return -EPROTONOSUPPORT; } diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 5da93ee..3613c3b 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -604,6 +604,10 @@ void st_kim_ref(struct st_data_s **core_data, int id) struct kim_data_s *kim_gdata; /* get kim_gdata reference from platform device */ pdev = st_get_plat_device(id); + if (!pdev) { + *core_data = NULL; + return; + } kim_gdata = dev_get_drvdata(&pdev->dev); *core_data = kim_gdata->core_data; } -- cgit v0.10.2 From bb2b43fefab723f4a0760146e7bed59d41a50e53 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 23 May 2011 14:44:19 -0700 Subject: drivers/base/platform.c: don't mark platform_device_register_resndata() as __init_or_module MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts 737a3bb9416ce2a7c7a4 ("Driver core: move platform device creation helpers to .init.text (if MODULE=n)"). That patch assumed that platform_device_register_resndata() is only ever called from __init code but that isn't true in the case ioctl->drm_ioctl->radeon_cp_init(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=35192 Cc: Uwe Kleine-König Reported-by: Anthony Basile Cc: Greg KH Cc: David Airlie Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 1c291af..6040717 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -367,7 +367,7 @@ EXPORT_SYMBOL_GPL(platform_device_unregister); * * Returns &struct platform_device pointer on success, or ERR_PTR() on error. */ -struct platform_device *__init_or_module platform_device_register_resndata( +struct platform_device *platform_device_register_resndata( struct device *parent, const char *name, int id, const struct resource *res, unsigned int num, -- cgit v0.10.2 From 9d031d94da453077bbc6108b7822fc751ac85299 Mon Sep 17 00:00:00 2001 From: Shahar Lev Date: Mon, 23 May 2011 11:36:11 +0300 Subject: drivers:misc: ti-st: fix skipping of change remote baud Before the incrementing of ptr in skip_change_remote_baud, it points to cur_action, but the increment is done by the size of nxt_action instead. This could cause ptr to not point to a bts_action structure, which is harmful for the increment of ptr done in download_firmware. Therefore, the skipping is first done for cur_action. Signed-off-by: Shahar Lev Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 3613c3b..38fd2f0 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -245,9 +245,9 @@ void skip_change_remote_baud(unsigned char **ptr, long *len) pr_err("invalid action after change remote baud command"); } else { *ptr = *ptr + sizeof(struct bts_action) + - ((struct bts_action *)nxt_action)->size; + ((struct bts_action *)cur_action)->size; *len = *len - (sizeof(struct bts_action) + - ((struct bts_action *)nxt_action)->size); + ((struct bts_action *)cur_action)->size); /* warn user on not commenting these in firmware */ pr_warn("skipping the wait event of change remote baud"); } -- cgit v0.10.2 From 29021bccea0dc42d7d101004058438a9a4e693b1 Mon Sep 17 00:00:00 2001 From: J Freyensee Date: Wed, 25 May 2011 14:38:18 -0700 Subject: pti: double-free security PTI fix This patch fixes a double-free error that will not always be seen unless /dev/pti char interface is stressed. Signed-off-by: J Freyensee Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index bb6f925..be48573 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -317,7 +317,8 @@ EXPORT_SYMBOL_GPL(pti_request_masterchannel); * a master, channel ID address * used to write to PTI HW. * - * @mc: master, channel apeture ID address to be released. + * @mc: master, channel apeture ID address to be released. This + * will de-allocate the structure via kfree(). */ void pti_release_masterchannel(struct pti_masterchannel *mc) { @@ -581,7 +582,7 @@ static int pti_char_open(struct inode *inode, struct file *filp) static int pti_char_release(struct inode *inode, struct file *filp) { pti_release_masterchannel(filp->private_data); - kfree(filp->private_data); + filp->private_data = NULL; return 0; } -- cgit v0.10.2 From 1dae42bff57f7a61577ee881265985a660d35c07 Mon Sep 17 00:00:00 2001 From: J Freyensee Date: Wed, 25 May 2011 14:45:40 -0700 Subject: pti: ENXIO error case memory leak PTI fix. This patch fixes a memory leak that can occur in the error case ENXIO is returned in the pti_tty_install() routine. Signed-off-by: J Freyensee Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index be48573..e74e7d2 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -476,8 +476,10 @@ static int pti_tty_install(struct tty_driver *driver, struct tty_struct *tty) else pti_tty_data->mc = pti_request_masterchannel(2); - if (pti_tty_data->mc == NULL) + if (pti_tty_data->mc == NULL) { + kfree(pti_tty_data); return -ENXIO; + } tty->driver_data = pti_tty_data; } -- cgit v0.10.2 From 1312ba40c0d00f0a5cfcfe3afc222fcef2a90b56 Mon Sep 17 00:00:00 2001 From: J Freyensee Date: Wed, 25 May 2011 14:56:43 -0700 Subject: pti: PTI semantics fix in pti_tty_cleanup. This patch fixes a semantics issue in the pti_tty_cleanup() routine. Signed-off-by: J Freyensee Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index e74e7d2..374dfcf 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -498,7 +498,7 @@ static void pti_tty_cleanup(struct tty_struct *tty) if (pti_tty_data == NULL) return; pti_release_masterchannel(pti_tty_data->mc); - kfree(tty->driver_data); + kfree(pti_tty_data); tty->driver_data = NULL; } -- cgit v0.10.2 From 92f6fa09bd453ffe3351fa1f1377a1b7cfa911e6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sun, 5 Jun 2011 14:16:16 +0200 Subject: TTY: ldisc, do not close until there are readers We restored tty_ldisc_wait_idle in 100eeae2c5c (TTY: restore tty_ldisc_wait_idle). We used it in the ldisc changing path to fix the case where there are tasks in n_tty_read waiting for data and somebody tries to change ldisc. Similar to the case above, there may be also tasks waiting in n_tty_read while hangup is performed. As 65b770468e98 (tty-ldisc: turn ldisc user count into a proper refcount) removed the wait-until-idle from all paths, hangup path won't wait for them to disappear either now. So add it back even to the hangup path. There is a difference, we need uninterruptible sleep as there is obviously HUP signal pending. So tty_ldisc_wait_idle now sleeps without possibility to be interrupted. This is what original tty_ldisc_wait_idle did. After the wait idle reintroduction (100eeae2c5c), we have had interruptible sleeps for the ldisc changing path. But as there is a 5s timeout anyway, we don't allow it to be interrupted from now on. It's not worth the added complexity of deciding what kind of sleep we want. Before 65b770468e98 tty_ldisc_release was called also from tty_ldisc_release. It is called from tty_release, so I don't think we need to restore that one. This is nicely reproducible after constifying the timing when drivers/tty/n_tty.c is patched as follows ("TTY: ntty, add one more sanity check" patch is needed to actually see it explode): %% -1548,6 +1549,7 @@ static int n_tty_open(struct tty_struct *tty) /* These are ugly. Currently a malloc failure here can panic */ if (!tty->read_buf) { + msleep(100); tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL); if (!tty->read_buf) return -ENOMEM; %% -1785,6 +1788,7 @@ do_it_again: break; } timeout = schedule_timeout(timeout); + msleep(20); continue; } __set_current_state(TASK_RUNNING); ===== With a process: ===== while (1) { int fd = open(argv[1], O_RDWR); read(fd, buf, sizeof(buf)); close(fd); } ===== and its child: ===== setsid(); while (1) { int fd = open(tty, O_RDWR|O_NOCTTY); ioctl(fd, TIOCSCTTY, 1); vhangup(); close(fd); usleep(100 * (10 + random() % 1000)); } ===== EOF ===== References: https://bugzilla.novell.com/show_bug.cgi?id=693374 References: https://bugzilla.novell.com/show_bug.cgi?id=694509 Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: Linus Torvalds Cc: stable [32, 33, 34, 39] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 5d01d32..ef925d5 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -555,7 +555,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) static int tty_ldisc_wait_idle(struct tty_struct *tty) { int ret; - ret = wait_event_interruptible_timeout(tty_ldisc_idle, + ret = wait_event_timeout(tty_ldisc_idle, atomic_read(&tty->ldisc->users) == 1, 5 * HZ); if (ret < 0) return ret; @@ -763,6 +763,8 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; + WARN_ON_ONCE(tty_ldisc_wait_idle(tty)); + tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; -- cgit v0.10.2 From 2872628680bad71a6734e7d379168f990a91cc09 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sun, 5 Jun 2011 14:16:17 +0200 Subject: TTY: ntty, add one more sanity check With the previous patch, we fixed another bug where read_buf was freed while we still was in n_tty_read. We currently check whether read_buf is NULL at the start of the function. Add one more check after we wake up from waiting for input. Signed-off-by: Jiri Slaby Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0ad3288..c3954fb 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1815,6 +1815,7 @@ do_it_again: /* FIXME: does n_tty_set_room need locking ? */ n_tty_set_room(tty); timeout = schedule_timeout(timeout); + BUG_ON(!tty->read_buf); continue; } __set_current_state(TASK_RUNNING); -- cgit v0.10.2 From ea2c00095c022846dd8dfd211de05154d3e4e1b8 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Tue, 17 May 2011 15:25:37 -0700 Subject: Connector: Set the CN_NETLINK_USERS correctly The CN_NETLINK_USERS must be set to the highest valid index +1. Thanks to Evgeniy for pointing this out. Signed-off-by: K. Y. Srinivasan Acked-by: Evgeniy Polyakov Cc: stable [.39] Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/connector.h b/include/linux/connector.h index 7c60d09..f696bcc 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -44,7 +44,7 @@ #define CN_VAL_DRBD 0x1 #define CN_KVP_IDX 0x9 /* HyperV KVP */ -#define CN_NETLINK_USERS 9 +#define CN_NETLINK_USERS 10 /* Highest index + 1 */ /* * Maximum connector's message size. -- cgit v0.10.2 From 663dd6dcaf7e95526e469e91f41972a9c0cca30c Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Tue, 17 May 2011 15:25:38 -0700 Subject: Connector: Correctly set the error code in case of success when dispatching receive callbacks The recent changes to the connector code introduced this bug where even when a callback was invoked, we would return an error resulting in double freeing of the skb. This patch fixes this bug. Signed-off-by: K. Y. Srinivasan Acked-by: Evgeniy Polyakov Cc: stable [.39] Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 219d88a..dde6a0f 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -139,6 +139,7 @@ static int cn_call_callback(struct sk_buff *skb) spin_unlock_bh(&dev->cbdev->queue_lock); if (cbq != NULL) { + err = 0; cbq->callback(msg, nsp); kfree_skb(skb); cn_queue_release_callback(cbq); -- cgit v0.10.2 From 72887c8644384c0cc43b9298ae0659de383f2e9c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A1rton=20N=C3=A9meth?= Date: Mon, 30 May 2011 20:45:42 +0200 Subject: usb: musb: host: compare status for negative error values MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Variable d is a struct usb_iso_packet_descriptor. The status filed is usually negative when an error happens. Signed-off-by: Márton Németh Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 7295e31..8b2473f 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1575,7 +1575,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) /* even if there was an error, we did the dma * for iso_frame_desc->length */ - if (d->status != EILSEQ && d->status != -EOVERFLOW) + if (d->status != -EILSEQ && d->status != -EOVERFLOW) d->status = 0; if (++qh->iso_idx >= urb->number_of_packets) -- cgit v0.10.2 From 4858f06e7d92ed2ebdb29ccbc079c127e675a89c Mon Sep 17 00:00:00 2001 From: Yauheni Kaliuta Date: Wed, 8 Jun 2011 17:12:02 +0300 Subject: usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO Fixes mis-use of MUSB's hardware feature where it won't flush FIFOs when TXPKTRDY flag was set before and we are flushing setting both FLUSHFIFO and TXPKTRDY. In other words, we need to ensure that when we try to flush FIFOs, we don't accidentaly set TXPKTRDY bit too due to a read-back of the register. The MUSB Programming Guide says "May be set simultaneously with TxPktRdy to abort the packet that is currently being loaded into the FIFO". This is a situation where TXPKTRDY hasn't been set yet, but some data already loaded into the fifo. It looks, that if TXPKTRDY has been set before, and there is no loading in progress, but we set FLUSHFIFO with the TXPKTRDY, controller tries to use the same logic to abort loading and as the result just does nothing (because there is no packet been loaded currently) Signed-off-by: Yauheni Kaliuta [ balbi@ti.com : fixed one whitespace git complained about improved the commit log slightly ] Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 0a50a35..6aeb363 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1524,6 +1524,12 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep) csr = musb_readw(epio, MUSB_TXCSR); if (csr & MUSB_TXCSR_FIFONOTEMPTY) { csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS; + /* + * Setting both TXPKTRDY and FLUSHFIFO makes controller + * to interrupt current FIFO loading, but not flushing + * the already loaded ones. + */ + csr &= ~MUSB_TXCSR_TXPKTRDY; musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */ musb_writew(epio, MUSB_TXCSR, csr); -- cgit v0.10.2 From db5e7ecc4abc91b9f26f0c0d79ef88a51e987d90 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 9 Jun 2011 08:40:59 -0400 Subject: tracing: Fix regression in printk_formats file The fix to fix the printk_formats of modules broke the printk_formats of trace_printks in the kernel. The update of what to show via the seq_file was only updated if the passed in fmt was NULL, which happens only on the first iteration. The result was showing the first format every time instead of iterating through the available formats. Signed-off-by: Steven Rostedt diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c index dff763b..1f06468 100644 --- a/kernel/trace/trace_printk.c +++ b/kernel/trace/trace_printk.c @@ -240,13 +240,10 @@ static const char **find_next(void *v, loff_t *pos) const char **fmt = v; int start_index; - if (!fmt) - fmt = __start___trace_bprintk_fmt + *pos; - start_index = __stop___trace_bprintk_fmt - __start___trace_bprintk_fmt; if (*pos < start_index) - return fmt; + return __start___trace_bprintk_fmt + *pos; return find_next_mod_format(start_index, v, fmt, pos); } -- cgit v0.10.2 From a91d92875ee94e4703fd017ccaadb48cfb344994 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 3 Jun 2011 09:51:34 +0000 Subject: xen: partially revert "xen: set max_pfn_mapped to the last pfn mapped" We only need to set max_pfn_mapped to the last pfn mapped on x86_64 to make sure that cleanup_highmap doesn't remove important mappings at _end. We don't need to do this on x86_32 because cleanup_highmap is not called on x86_32. Besides lowering max_pfn_mapped on x86_32 has the unwanted side effect of limiting the amount of memory available for the 1:1 kernel pagetable allocation. This patch reverts the x86_32 part of the original patch. CC: stable@kernel.org Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index dc708dc..afe1d54 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1599,6 +1599,11 @@ static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn) for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) { pte_t pte; +#ifdef CONFIG_X86_32 + if (pfn > max_pfn_mapped) + max_pfn_mapped = pfn; +#endif + if (!pte_none(pte_page[pteidx])) continue; @@ -1766,7 +1771,9 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd, initial_kernel_pmd = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); - max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->mfn_list)); + max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) + + xen_start_info->nr_pt_frames * PAGE_SIZE + + 512*1024); kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd); memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD); -- cgit v0.10.2 From 8d03e971cf403305217b8e62db3a2e5ad2d6263f Mon Sep 17 00:00:00 2001 From: Filip Palian Date: Thu, 12 May 2011 19:32:46 +0200 Subject: Bluetooth: l2cap and rfcomm: fix 1 byte infoleak to userspace. Structures "l2cap_conninfo" and "rfcomm_conninfo" have one padding byte each. This byte in "cinfo" is copied to userspace uninitialized. Signed-off-by: Filip Palian Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 18dc988..8248303 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -413,6 +413,7 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname, char __us break; } + memset(&cinfo, 0, sizeof(cinfo)); cinfo.hci_handle = chan->conn->hcon->handle; memcpy(cinfo.dev_class, chan->conn->hcon->dev_class, 3); diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 386cfaf..1b10727 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -788,6 +788,7 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; + memset(&cinfo, 0, sizeof(cinfo)); cinfo.hci_handle = conn->hcon->handle; memcpy(cinfo.dev_class, conn->hcon->dev_class, 3); -- cgit v0.10.2 From a9dce2a3b4f0686dd66cb44d4826a59508bce969 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 9 Jun 2011 20:43:54 +0200 Subject: block: don't use non-syncing event blocking in disk_check_events() This patch is part of fix for triggering of WARN_ON_ONCE() in disk_clear_events() reported in bug#34662. https://bugzilla.kernel.org/show_bug.cgi?id=34662 disk_clear_events() blocks events, schedules and flushes the event work. It expects the work to have started execution on schedule and finished on return from flush. WARN_ON_ONCE() triggers if the event work hasn't executed as expected. This problem happens because __disk_block_events() fails to guarantee that the event work item is not in flight on return from the function in race-free manner. The problem is two-fold and this patch addresses one of them. When __disk_block_events() is called with @sync == %false, it bumps event block count, calls cancel_delayed_work() and return. This makes it impossible to guarantee that event polling is not in flight on return from syncing __disk_block_events() - if the first blocker was non-syncing, polling could still be in progress and later syncing ones would assume that the first blocker already canceled it. Making __disk_block_events() cancel_sync regardless of block count isn't feasible either as it may race with forced event checking in disk_clear_events(). As disk_check_events() is the only user of non-syncing __disk_block_events(), updating it to directly cancel and schedule event work is the easiest way to solve the issue. Note that there's another bug in __disk_block_events() and this patch doesn't fix the issue completely. Later patch will fix the other bug. Signed-off-by: Tejun Heo Tested-by: Sitsofe Wheeler Reported-by: Sitsofe Wheeler Reported-by: Borislav Petkov Reported-by: Meelis Roos Reported-by: Linus Torvalds Cc: Andrew Morton Cc: Jens Axboe Cc: Kay Sievers Signed-off-by: Jens Axboe diff --git a/block/genhd.c b/block/genhd.c index 95822ae..3f09330 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1508,10 +1508,18 @@ void disk_unblock_events(struct gendisk *disk) */ void disk_check_events(struct gendisk *disk) { - if (disk->ev) { - __disk_block_events(disk, false); - __disk_unblock_events(disk, true); + struct disk_events *ev = disk->ev; + unsigned long flags; + + if (!ev) + return; + + spin_lock_irqsave(&ev->lock, flags); + if (!ev->block) { + cancel_delayed_work(&ev->dwork); + queue_delayed_work(system_nrt_wq, &ev->dwork, 0); } + spin_unlock_irqrestore(&ev->lock, flags); } EXPORT_SYMBOL_GPL(disk_check_events); -- cgit v0.10.2 From c3af54afbac3675337cedf326b7b127ffa7f7327 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 9 Jun 2011 20:43:55 +0200 Subject: block: remove non-syncing __disk_block_events() and fold it into disk_block_events() After the previous update to disk_check_events(), nobody is using non-syncing __disk_block_events(). Remove @sync and, as this makes __disk_block_events() virtually identical to disk_block_events(), remove the underscore prefixed version. Signed-off-by: Tejun Heo Cc: Jens Axboe Signed-off-by: Jens Axboe diff --git a/block/genhd.c b/block/genhd.c index 3f09330..ab0731d 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1414,22 +1414,36 @@ static unsigned long disk_events_poll_jiffies(struct gendisk *disk) return msecs_to_jiffies(intv_msecs); } -static void __disk_block_events(struct gendisk *disk, bool sync) +/** + * disk_block_events - block and flush disk event checking + * @disk: disk to block events for + * + * On return from this function, it is guaranteed that event checking + * isn't in progress and won't happen until unblocked by + * disk_unblock_events(). Events blocking is counted and the actual + * unblocking happens after the matching number of unblocks are done. + * + * Note that this intentionally does not block event checking from + * disk_clear_events(). + * + * CONTEXT: + * Might sleep. + */ +void disk_block_events(struct gendisk *disk) { struct disk_events *ev = disk->ev; unsigned long flags; bool cancel; + if (!ev) + return; + spin_lock_irqsave(&ev->lock, flags); cancel = !ev->block++; spin_unlock_irqrestore(&ev->lock, flags); - if (cancel) { - if (sync) - cancel_delayed_work_sync(&disk->ev->dwork); - else - cancel_delayed_work(&disk->ev->dwork); - } + if (cancel) + cancel_delayed_work_sync(&disk->ev->dwork); } static void __disk_unblock_events(struct gendisk *disk, bool check_now) @@ -1461,27 +1475,6 @@ out_unlock: } /** - * disk_block_events - block and flush disk event checking - * @disk: disk to block events for - * - * On return from this function, it is guaranteed that event checking - * isn't in progress and won't happen until unblocked by - * disk_unblock_events(). Events blocking is counted and the actual - * unblocking happens after the matching number of unblocks are done. - * - * Note that this intentionally does not block event checking from - * disk_clear_events(). - * - * CONTEXT: - * Might sleep. - */ -void disk_block_events(struct gendisk *disk) -{ - if (disk->ev) - __disk_block_events(disk, true); -} - -/** * disk_unblock_events - unblock disk event checking * @disk: disk to unblock events for * @@ -1554,7 +1547,7 @@ unsigned int disk_clear_events(struct gendisk *disk, unsigned int mask) spin_unlock_irq(&ev->lock); /* uncondtionally schedule event check and wait for it to finish */ - __disk_block_events(disk, true); + disk_block_events(disk); queue_delayed_work(system_nrt_wq, &ev->dwork, 0); flush_delayed_work(&ev->dwork); __disk_unblock_events(disk, false); @@ -1672,7 +1665,7 @@ static ssize_t disk_events_poll_msecs_store(struct device *dev, if (intv < 0 && intv != -1) return -EINVAL; - __disk_block_events(disk, true); + disk_block_events(disk); disk->ev->poll_msecs = intv; __disk_unblock_events(disk, true); @@ -1778,7 +1771,7 @@ static void disk_del_events(struct gendisk *disk) if (!disk->ev) return; - __disk_block_events(disk, true); + disk_block_events(disk); mutex_lock(&disk_events_mutex); list_del_init(&disk->ev->node); -- cgit v0.10.2 From fdd514e16bb2531c0c61ae8a1f87740ce217f630 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 9 Jun 2011 20:43:59 +0200 Subject: block: make disk_block_events() properly wait for work cancellation disk_block_events() should guarantee that the event work is not in flight on return and once blocked it shouldn't issue further cancellations. Because there was no synchronization between the first blocker doing cancel_delayed_work_sync() and the following blockers, the following blockers could finish before cancellation was complete, which broke both guarantees - event work could be in flight and cancellation could happen after return. This bug triggered WARN_ON_ONCE() in disk_clear_events() reported in bug#34662. https://bugzilla.kernel.org/show_bug.cgi?id=34662 Fix it by adding an outer mutex which protects both block count manipulation and work cancellation. -v2: Use outer mutex instead of bit waitqueue per Linus. Signed-off-by: Tejun Heo Tested-by: Sitsofe Wheeler Reported-by: Sitsofe Wheeler Reported-by: Borislav Petkov Reported-by: Meelis Roos Reported-by: Linus Torvalds Cc: Andrew Morton Cc: Jens Axboe Cc: Kay Sievers Signed-off-by: Jens Axboe diff --git a/block/genhd.c b/block/genhd.c index ab0731d..3608289 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1371,6 +1371,7 @@ struct disk_events { struct gendisk *disk; /* the associated disk */ spinlock_t lock; + struct mutex block_mutex; /* protects blocking */ int block; /* event blocking depth */ unsigned int pending; /* events already sent out */ unsigned int clearing; /* events being cleared */ @@ -1438,12 +1439,20 @@ void disk_block_events(struct gendisk *disk) if (!ev) return; + /* + * Outer mutex ensures that the first blocker completes canceling + * the event work before further blockers are allowed to finish. + */ + mutex_lock(&ev->block_mutex); + spin_lock_irqsave(&ev->lock, flags); cancel = !ev->block++; spin_unlock_irqrestore(&ev->lock, flags); if (cancel) cancel_delayed_work_sync(&disk->ev->dwork); + + mutex_unlock(&ev->block_mutex); } static void __disk_unblock_events(struct gendisk *disk, bool check_now) @@ -1751,6 +1760,7 @@ static void disk_add_events(struct gendisk *disk) INIT_LIST_HEAD(&ev->node); ev->disk = disk; spin_lock_init(&ev->lock); + mutex_init(&ev->block_mutex); ev->block = 1; ev->poll_msecs = -1; INIT_DELAYED_WORK(&ev->dwork, disk_events_workfn); -- cgit v0.10.2 From 0da67bed835fdde68ca0e924d2a2d6ac82c70833 Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Thu, 12 May 2011 11:13:15 +0300 Subject: Bluetooth: fix shutdown on SCO sockets shutdown should wait for SCO link to be properly disconnected before detroying the socket, otherwise an application using the socket may assume link is properly disconnected before it really happens which can be a problem when e.g synchronizing profile switch. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 42fdffd..cb4fb78 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -369,6 +369,15 @@ static void __sco_sock_close(struct sock *sk) case BT_CONNECTED: case BT_CONFIG: + if (sco_pi(sk)->conn) { + sk->sk_state = BT_DISCONN; + sco_sock_set_timer(sk, SCO_DISCONN_TIMEOUT); + hci_conn_put(sco_pi(sk)->conn->hcon); + sco_pi(sk)->conn->hcon = NULL; + } else + sco_chan_del(sk, ECONNRESET); + break; + case BT_CONNECT: case BT_DISCONN: sco_chan_del(sk, ECONNRESET); @@ -819,7 +828,9 @@ static void sco_chan_del(struct sock *sk, int err) conn->sk = NULL; sco_pi(sk)->conn = NULL; sco_conn_unlock(conn); - hci_conn_put(conn->hcon); + + if (conn->hcon) + hci_conn_put(conn->hcon); } sk->sk_state = BT_CLOSED; -- cgit v0.10.2 From 26e7acf315ba5fc5ac4e7cbdb422a345e59898bd Mon Sep 17 00:00:00 2001 From: David Miller Date: Thu, 19 May 2011 17:37:45 -0400 Subject: Bluetooth: Do not ignore errors returned from strict_strtol() Signed-off-by: David S. Miller Signed-off-by: Gustavo F. Padovan diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c index fd6305b..8ecf4c6 100644 --- a/drivers/bluetooth/btmrvl_debugfs.c +++ b/drivers/bluetooth/btmrvl_debugfs.c @@ -64,6 +64,8 @@ static ssize_t btmrvl_hscfgcmd_write(struct file *file, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hscfgcmd = result; @@ -108,6 +110,8 @@ static ssize_t btmrvl_psmode_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.psmode = result; @@ -147,6 +151,8 @@ static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.pscmd = result; @@ -191,6 +197,8 @@ static ssize_t btmrvl_gpiogap_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 16, &result); + if (ret) + return ret; priv->btmrvl_dev.gpio_gap = result; @@ -230,6 +238,8 @@ static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hscmd = result; if (priv->btmrvl_dev.hscmd) { @@ -272,6 +282,8 @@ static ssize_t btmrvl_hsmode_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hsmode = result; -- cgit v0.10.2 From 7f4f0572df6c8eaa6a587bc212b0806ff37380dd Mon Sep 17 00:00:00 2001 From: Ville Tervo Date: Fri, 27 May 2011 11:16:21 +0300 Subject: Bluetooth: Do not send SET_EVENT_MASK for 1.1 and earlier devices Some old hci controllers do not accept any mask so leave the default mask on for these devices. < HCI Command: Set Event Mask (0x03|0x0001) plen 8 Mask: 0xfffffbff00000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask (0x03|0x0001) ncmd 1 status 0x12 Error: Invalid HCI Command Parameters Signed-off-by: Ville Tervo Tested-by: Corey Boyle Tested-by: Ed Tomlinson Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index f13ddbf..77930aa 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -477,14 +477,16 @@ static void hci_setup_event_mask(struct hci_dev *hdev) * command otherwise */ u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 }; - /* Events for 1.2 and newer controllers */ - if (hdev->lmp_ver > 1) { - events[4] |= 0x01; /* Flow Specification Complete */ - events[4] |= 0x02; /* Inquiry Result with RSSI */ - events[4] |= 0x04; /* Read Remote Extended Features Complete */ - events[5] |= 0x08; /* Synchronous Connection Complete */ - events[5] |= 0x10; /* Synchronous Connection Changed */ - } + /* CSR 1.1 dongles does not accept any bitfield so don't try to set + * any event mask for pre 1.2 devices */ + if (hdev->lmp_ver <= 1) + return; + + events[4] |= 0x01; /* Flow Specification Complete */ + events[4] |= 0x02; /* Inquiry Result with RSSI */ + events[4] |= 0x04; /* Read Remote Extended Features Complete */ + events[5] |= 0x08; /* Synchronous Connection Complete */ + events[5] |= 0x10; /* Synchronous Connection Changed */ if (hdev->features[3] & LMP_RSSI_INQ) events[4] |= 0x04; /* Inquiry Result with RSSI */ -- cgit v0.10.2 From 5ae8f9a3757e4010c7ea9c07c047088fb812335e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 26 May 2011 15:51:11 -0300 Subject: [media] mceusb: add and use mce_dbg printk macro Using dev_dbg is more complexity than many users are able to deal with. Make it easier to get debug spew feedback from them by adding an mce_dbg printk macro that spews using dev_info when debug=1 is set for the mceusb module. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index ad927fc..10ec54b 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -108,6 +108,12 @@ static int debug = 1; static int debug; #endif +#define mce_dbg(dev, fmt, ...) \ + do { \ + if (debug) \ + dev_info(dev, fmt, ## __VA_ARGS__); \ + } while (0) + /* general constants */ #define SEND_FLAG_IN_PROGRESS 1 #define SEND_FLAG_COMPLETE 2 @@ -606,7 +612,7 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs) if (ir) { len = urb->actual_length; - dev_dbg(ir->dev, "callback called (status=%d len=%d)\n", + mce_dbg(ir->dev, "callback called (status=%d len=%d)\n", urb->status, len); mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true); @@ -655,17 +661,17 @@ static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data, return; } - dev_dbg(dev, "receive request called (size=%#x)\n", size); + mce_dbg(dev, "receive request called (size=%#x)\n", size); async_urb->transfer_buffer_length = size; async_urb->dev = ir->usbdev; res = usb_submit_urb(async_urb, GFP_ATOMIC); if (res) { - dev_dbg(dev, "receive request FAILED! (res=%d)\n", res); + mce_dbg(dev, "receive request FAILED! (res=%d)\n", res); return; } - dev_dbg(dev, "receive request complete (res=%d)\n", res); + mce_dbg(dev, "receive request complete (res=%d)\n", res); } static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size) @@ -794,7 +800,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier) ir->carrier = carrier; cmdbuf[2] = MCE_CMD_SIG_END; cmdbuf[3] = MCE_IRDATA_TRAILER; - dev_dbg(ir->dev, "%s: disabling carrier " + mce_dbg(ir->dev, "%s: disabling carrier " "modulation\n", __func__); mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); return carrier; @@ -806,7 +812,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier) ir->carrier = carrier; cmdbuf[2] = prescaler; cmdbuf[3] = divisor; - dev_dbg(ir->dev, "%s: requesting %u HZ " + mce_dbg(ir->dev, "%s: requesting %u HZ " "carrier\n", __func__, carrier); /* Transmit new carrier to mce device */ @@ -879,7 +885,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) * US_TO_NS(MCE_TIME_UNIT); - dev_dbg(ir->dev, "Storing %s with duration %d\n", + mce_dbg(ir->dev, "Storing %s with duration %d\n", rawir.pulse ? "pulse" : "space", rawir.duration); @@ -911,7 +917,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) if (ir->parser_state != CMD_HEADER && !ir->rem) ir->parser_state = CMD_HEADER; } - dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n"); + mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n"); ir_raw_event_handle(ir->rc); } @@ -933,7 +939,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs) if (ir->send_flags == RECV_FLAG_IN_PROGRESS) { ir->send_flags = SEND_FLAG_COMPLETE; - dev_dbg(ir->dev, "setup answer received %d bytes\n", + mce_dbg(ir->dev, "setup answer received %d bytes\n", buf_len); } @@ -951,7 +957,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs) case -EPIPE: default: - dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status); + mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status); break; } @@ -978,8 +984,8 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0, data, USB_CTRL_MSG_SZ, HZ * 3); - dev_dbg(dev, "%s - ret = %d\n", __func__, ret); - dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n", + mce_dbg(dev, "%s - ret = %d\n", __func__, ret); + mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n", __func__, data[0], data[1]); /* set feature: bit rate 38400 bps */ @@ -987,19 +993,19 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) USB_REQ_SET_FEATURE, USB_TYPE_VENDOR, 0xc04e, 0x0000, NULL, 0, HZ * 3); - dev_dbg(dev, "%s - ret = %d\n", __func__, ret); + mce_dbg(dev, "%s - ret = %d\n", __func__, ret); /* bRequest 4: set char length to 8 bits */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 4, USB_TYPE_VENDOR, 0x0808, 0x0000, NULL, 0, HZ * 3); - dev_dbg(dev, "%s - retB = %d\n", __func__, ret); + mce_dbg(dev, "%s - retB = %d\n", __func__, ret); /* bRequest 2: set handshaking to use DTR/DSR */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 2, USB_TYPE_VENDOR, 0x0000, 0x0100, NULL, 0, HZ * 3); - dev_dbg(dev, "%s - retC = %d\n", __func__, ret); + mce_dbg(dev, "%s - retC = %d\n", __func__, ret); /* device reset */ mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET)); @@ -1122,7 +1128,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf, bool tx_mask_normal; int ir_intfnum; - dev_dbg(&intf->dev, "%s called\n", __func__); + mce_dbg(&intf->dev, "%s called\n", __func__); idesc = intf->cur_altsetting; @@ -1150,7 +1156,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf, ep_in = ep; ep_in->bmAttributes = USB_ENDPOINT_XFER_INT; ep_in->bInterval = 1; - dev_dbg(&intf->dev, "acceptable inbound endpoint " + mce_dbg(&intf->dev, "acceptable inbound endpoint " "found\n"); } @@ -1165,12 +1171,12 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf, ep_out = ep; ep_out->bmAttributes = USB_ENDPOINT_XFER_INT; ep_out->bInterval = 1; - dev_dbg(&intf->dev, "acceptable outbound endpoint " + mce_dbg(&intf->dev, "acceptable outbound endpoint " "found\n"); } } if (ep_in == NULL) { - dev_dbg(&intf->dev, "inbound and/or endpoint not found\n"); + mce_dbg(&intf->dev, "inbound and/or endpoint not found\n"); return -ENODEV; } -- cgit v0.10.2 From b825fe1b1bb5927402c3d3084641355946ef05f8 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 26 May 2011 16:03:17 -0300 Subject: [media] mceusb: support I-O Data GV-MC7/RCKIT There's an SMK-device-id remote kit from I-O Data avaiable primarily in Japan, which appears to have no tx hardware, but has rx functionality that works with the mceusb driver by simply adding its device ID. Reported-by: Jeremy Kwok Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 10ec54b..650b2f4 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -252,6 +252,9 @@ static struct usb_device_id mceusb_dev_table[] = { .driver_info = MCE_GEN2_TX_INV }, /* SMK eHome Infrared Transceiver */ { USB_DEVICE(VENDOR_SMK, 0x0338) }, + /* SMK/I-O Data GV-MC7/RCKIT Receiver */ + { USB_DEVICE(VENDOR_SMK, 0x0353), + .driver_info = MCE_GEN2_NO_TX }, /* Tatung eHome Infrared Transceiver */ { USB_DEVICE(VENDOR_TATUNG, 0x9150) }, /* Shuttle eHome Infrared Transceiver */ -- cgit v0.10.2 From 3a918aa69daf001910640cc910ea4053ba840a6e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 26 May 2011 14:23:18 -0300 Subject: [media] mceusb: mce_sync_in is brain-dead Aside from the initial "hey, lets make sure we've flushed any pre-existing data on the device" call to mce_sync_in, every other one of the calls was entirely superfluous. Ergo, remove them all, and rename the one and only (questionably) useful one to reflect what it really does. Verified on both gen2 and gen3 hardware to make zero difference. Well, except that you no longer get a bunch of urb submit failures from the unneeded mce_sync_in calls. Oh. And move that flush to a point *after* we've wired up the inbound urb, or it won't do squat. I have half a mind to just remove it entirely, but someone thought it was necessary at some point, and it doesn't seem to hurt, so lets leave it for the time being. This excercise took place due to insightful questions asked by Hans Petter Selasky, about the possible reuse of the inbound urb before it was actually availble by mce_sync_in, so thanks to him for motivating this cleanup. Reported-by: Hans Petter Selasky Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 650b2f4..6cf2201 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -682,9 +682,9 @@ static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size) mce_request_packet(ir, data, size, MCEUSB_TX); } -static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size) +static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size) { - mce_request_packet(ir, data, size, MCEUSB_RX); + mce_request_packet(ir, NULL, size, MCEUSB_RX); } /* Send data out the IR blaster port(s) */ @@ -970,7 +970,6 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs) static void mceusb_gen1_init(struct mceusb_dev *ir) { int ret; - int maxp = ir->len_in; struct device *dev = ir->dev; char *data; @@ -1012,55 +1011,40 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) /* device reset */ mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET)); - mce_sync_in(ir, NULL, maxp); /* get hw/sw revision? */ mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); - mce_sync_in(ir, NULL, maxp); kfree(data); }; static void mceusb_gen2_init(struct mceusb_dev *ir) { - int maxp = ir->len_in; - /* device reset */ mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET)); - mce_sync_in(ir, NULL, maxp); /* get hw/sw revision? */ mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); - mce_sync_in(ir, NULL, maxp); /* unknown what the next two actually return... */ mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN)); - mce_sync_in(ir, NULL, maxp); mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2)); - mce_sync_in(ir, NULL, maxp); } static void mceusb_get_parameters(struct mceusb_dev *ir) { - int maxp = ir->len_in; - /* get the carrier and frequency */ mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ)); - mce_sync_in(ir, NULL, maxp); - if (!ir->flags.no_tx) { + if (!ir->flags.no_tx) /* get the transmitter bitmask */ mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK)); - mce_sync_in(ir, NULL, maxp); - } /* get receiver timeout value */ mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT)); - mce_sync_in(ir, NULL, maxp); /* get receiver sensor setting */ mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR)); - mce_sync_in(ir, NULL, maxp); } static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) @@ -1224,16 +1208,16 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf, if (!ir->rc) goto rc_dev_fail; - /* flush buffers on the device */ - mce_sync_in(ir, NULL, maxp); - mce_sync_in(ir, NULL, maxp); - /* wire up inbound data handler */ usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval); ir->urb_in->transfer_dma = ir->dma_in; ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + /* flush buffers on the device */ + mce_dbg(&intf->dev, "Flushing receive buffers\n"); + mce_flush_rx_buffer(ir, maxp); + /* initialize device */ if (ir->flags.microsoft_gen1) mceusb_gen1_init(ir); -- cgit v0.10.2 From e5fd0f7db3c3ba127dc1c51f0a0fe31d89db27cc Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 27 May 2011 15:37:23 -0300 Subject: [media] [staging] lirc_imon: fix unused-but-set warnings Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c index 4039eda..4a9e563 100644 --- a/drivers/staging/lirc/lirc_imon.c +++ b/drivers/staging/lirc/lirc_imon.c @@ -672,8 +672,6 @@ static void imon_incoming_packet(struct imon_context *context, static void usb_rx_callback(struct urb *urb) { struct imon_context *context; - unsigned char *buf; - int len; int intfnum = 0; if (!urb) @@ -683,9 +681,6 @@ static void usb_rx_callback(struct urb *urb) if (!context) return; - buf = urb->transfer_buffer; - len = urb->actual_length; - switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -728,7 +723,6 @@ static int imon_probe(struct usb_interface *interface, int ir_ep_found = 0; int alloc_status = 0; int vfd_proto_6p = 0; - int code_length; struct imon_context *context = NULL; int i; u16 vendor, product; @@ -749,8 +743,6 @@ static int imon_probe(struct usb_interface *interface, else context->display = 1; - code_length = BUF_CHUNK_SIZE * 8; - usbdev = usb_get_dev(interface_to_usbdev(interface)); iface_desc = interface->cur_altsetting; num_endpts = iface_desc->desc.bNumEndpoints; @@ -856,7 +848,7 @@ static int imon_probe(struct usb_interface *interface, strcpy(driver->name, MOD_NAME); driver->minor = -1; - driver->code_length = sizeof(int) * 8; + driver->code_length = BUF_CHUNK_SIZE * 8; driver->sample_rate = 0; driver->features = LIRC_CAN_REC_MODE2; driver->data = context; -- cgit v0.10.2 From 04f561ff8714c89733dcf1d178b64d100d5a084a Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 27 May 2011 15:46:19 -0300 Subject: [media] [staging] lirc_sir: fix unused-but-set warnings Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c index a7b46f2..0d38645 100644 --- a/drivers/staging/lirc/lirc_sir.c +++ b/drivers/staging/lirc/lirc_sir.c @@ -739,23 +739,16 @@ static void send_space(unsigned long len) static void send_pulse(unsigned long len) { long bytes_out = len / TIME_CONST; - long time_left; - time_left = (long)len - (long)bytes_out * (long)TIME_CONST; - if (bytes_out == 0) { + if (bytes_out == 0) bytes_out++; - time_left = 0; - } + while (bytes_out--) { outb(PULSE, io + UART_TX); /* FIXME treba seriozne cakanie z char/serial.c */ while (!(inb(io + UART_LSR) & UART_LSR_THRE)) ; } -#if 0 - if (time_left > 0) - safe_udelay(time_left); -#endif } #endif -- cgit v0.10.2 From 8de111e27688798623b9e9062235bb0cac29f599 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 27 May 2011 16:56:50 -0300 Subject: [media] lirc_dev: store cdev in irctl, up maxdevs Store the cdev pointer in struct irctl, allocated dynamically as needed, rather than having a static array. At the same time, recycle some of the saved memory to nudge the maximum number of lirc devices supported up a ways -- its not that uncommon these days, now that we have the rc-core lirc bridge driver, to see a system with at least 4 raw IR receivers. (consider a mythtv backend with several video capture devices and the possible need for IR transmit hardware). Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index fd237ab..27997a9 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -55,6 +55,8 @@ struct irctl { struct lirc_buffer *buf; unsigned int chunk_size; + struct cdev *cdev; + struct task_struct *task; long jiffies_to_wait; }; @@ -62,7 +64,6 @@ struct irctl { static DEFINE_MUTEX(lirc_dev_lock); static struct irctl *irctls[MAX_IRCTL_DEVICES]; -static struct cdev cdevs[MAX_IRCTL_DEVICES]; /* Only used for sysfs but defined to void otherwise */ static struct class *lirc_class; @@ -167,9 +168,13 @@ static struct file_operations lirc_dev_fops = { static int lirc_cdev_add(struct irctl *ir) { - int retval; + int retval = -ENOMEM; struct lirc_driver *d = &ir->d; - struct cdev *cdev = &cdevs[d->minor]; + struct cdev *cdev; + + cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); + if (!cdev) + goto err_out; if (d->fops) { cdev_init(cdev, d->fops); @@ -180,12 +185,20 @@ static int lirc_cdev_add(struct irctl *ir) } retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor); if (retval) - return retval; + goto err_out; retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1); - if (retval) + if (retval) { kobject_put(&cdev->kobj); + goto err_out; + } + + ir->cdev = cdev; + + return 0; +err_out: + kfree(cdev); return retval; } @@ -214,7 +227,7 @@ int lirc_register_driver(struct lirc_driver *d) if (MAX_IRCTL_DEVICES <= d->minor) { dev_err(d->dev, "lirc_dev: lirc_register_driver: " "\"minor\" must be between 0 and %d (%d)!\n", - MAX_IRCTL_DEVICES-1, d->minor); + MAX_IRCTL_DEVICES - 1, d->minor); err = -EBADRQC; goto out; } @@ -369,7 +382,7 @@ int lirc_unregister_driver(int minor) if (minor < 0 || minor >= MAX_IRCTL_DEVICES) { printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between " - "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1); + "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES - 1); return -EBADRQC; } @@ -380,7 +393,7 @@ int lirc_unregister_driver(int minor) return -ENOENT; } - cdev = &cdevs[minor]; + cdev = ir->cdev; mutex_lock(&lirc_dev_lock); @@ -410,6 +423,7 @@ int lirc_unregister_driver(int minor) } else { lirc_irctl_cleanup(ir); cdev_del(cdev); + kfree(cdev); kfree(ir); irctls[minor] = NULL; } @@ -453,7 +467,7 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file) goto error; } - cdev = &cdevs[iminor(inode)]; + cdev = ir->cdev; if (try_module_get(cdev->owner)) { ir->open++; retval = ir->d.set_use_inc(ir->d.data); @@ -484,13 +498,15 @@ EXPORT_SYMBOL(lirc_dev_fop_open); int lirc_dev_fop_close(struct inode *inode, struct file *file) { struct irctl *ir = irctls[iminor(inode)]; - struct cdev *cdev = &cdevs[iminor(inode)]; + struct cdev *cdev; if (!ir) { printk(KERN_ERR "%s: called with invalid irctl\n", __func__); return -EINVAL; } + cdev = ir->cdev; + dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor); WARN_ON(mutex_lock_killable(&lirc_dev_lock)); @@ -503,6 +519,7 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file) lirc_irctl_cleanup(ir); cdev_del(cdev); irctls[ir->d.minor] = NULL; + kfree(cdev); kfree(ir); } diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h index 630e702..168dd0b 100644 --- a/include/media/lirc_dev.h +++ b/include/media/lirc_dev.h @@ -9,7 +9,7 @@ #ifndef _LINUX_LIRC_DEV_H #define _LINUX_LIRC_DEV_H -#define MAX_IRCTL_DEVICES 4 +#define MAX_IRCTL_DEVICES 8 #define BUFLEN 16 #define mod(n, div) ((n) % (div)) -- cgit v0.10.2 From 0ae90252d0b28265bc16cf272e72d62281f7baf1 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 27 May 2011 17:14:51 -0300 Subject: [media] fintek-cir: make suspend with active IR more reliable There was a missing lock in fintek_suspend. Without the lock, its possible the system will be in the middle of receiving IR (draining the RX buffer) when we try to disable CIR interrupts. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c index 8fa539d..7f7079b 100644 --- a/drivers/media/rc/fintek-cir.c +++ b/drivers/media/rc/fintek-cir.c @@ -597,12 +597,17 @@ static void __devexit fintek_remove(struct pnp_dev *pdev) static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state) { struct fintek_dev *fintek = pnp_get_drvdata(pdev); + unsigned long flags; fit_dbg("%s called", __func__); + spin_lock_irqsave(&fintek->fintek_lock, flags); + /* disable all CIR interrupts */ fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); + spin_unlock_irqrestore(&fintek->fintek_lock, flags); + fintek_config_mode_enable(fintek); /* disable cir logical dev */ -- cgit v0.10.2 From 589e116062d8b5fd1809dfff4c9b7694ce6c2318 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 24 May 2011 14:19:23 -0300 Subject: [media] nuvoton-cir: in_use isn't actually in use, remove it Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index bf3060e..565f24c 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -991,7 +991,6 @@ static int nvt_open(struct rc_dev *dev) unsigned long flags; spin_lock_irqsave(&nvt->nvt_lock, flags); - nvt->in_use = true; nvt_enable_cir(nvt); spin_unlock_irqrestore(&nvt->nvt_lock, flags); @@ -1004,7 +1003,6 @@ static void nvt_close(struct rc_dev *dev) unsigned long flags; spin_lock_irqsave(&nvt->nvt_lock, flags); - nvt->in_use = false; nvt_disable_cir(nvt); spin_unlock_irqrestore(&nvt->nvt_lock, flags); } diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h index 379795d..1241fc8 100644 --- a/drivers/media/rc/nuvoton-cir.h +++ b/drivers/media/rc/nuvoton-cir.h @@ -70,7 +70,6 @@ struct nvt_dev { struct ir_raw_event rawir; spinlock_t nvt_lock; - bool in_use; /* for rx */ u8 buf[RX_BUF_LEN]; -- cgit v0.10.2 From 0b43fcdff6495958c39e3575848edef4b685ddef Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 24 May 2011 16:44:54 -0300 Subject: [media] mceusb: plug memory leak on data transmit Hans Petter Selasky pointed out to me that we're leaking urbs when mce_async_out is called. Its used both for configuring the hardware and for transmitting IR data. In the tx case, mce_request_packet actually allocates both a urb and the transfer buffer, neither of which was being torn down. Do that in the tx callback. CC: Hans Petter Selasky Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 6cf2201..06dfe09 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -621,6 +621,9 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs) mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true); } + /* the transfer buffer and urb were allocated in mce_request_packet */ + kfree(urb->transfer_buffer); + usb_free_urb(urb); } /* request incoming or send outgoing usb packet - used to initialize remote */ -- cgit v0.10.2 From 443b391900469f2c5ec5a354ce305000096a94b7 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Sat, 4 Jun 2011 14:00:54 -0300 Subject: [media] imon: support for 0x46 0xffdc imon vfd Courtesy of information from Andreas Dick on the lirc list. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 3f3c707..43344fd 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -307,6 +307,14 @@ static const struct { /* 0xffdc iMON MCE VFD */ { 0x00010000ffffffeell, KEY_VOLUMEUP }, { 0x01000000ffffffeell, KEY_VOLUMEDOWN }, + { 0x00000001ffffffeell, KEY_MUTE }, + { 0x0000000fffffffeell, KEY_MEDIA }, + { 0x00000012ffffffeell, KEY_UP }, + { 0x00000013ffffffeell, KEY_DOWN }, + { 0x00000014ffffffeell, KEY_LEFT }, + { 0x00000015ffffffeell, KEY_RIGHT }, + { 0x00000016ffffffeell, KEY_ENTER }, + { 0x00000017ffffffeell, KEY_ESC }, /* iMON Knob values */ { 0x000100ffffffffeell, KEY_VOLUMEUP }, { 0x010000ffffffffeell, KEY_VOLUMEDOWN }, @@ -1740,6 +1748,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx) detected_display_type = IMON_DISPLAY_TYPE_VFD; break; /* iMON VFD, MCE IR */ + case 0x46: case 0x9e: dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR"); detected_display_type = IMON_DISPLAY_TYPE_VFD; -- cgit v0.10.2 From 94215ccd99eb6e3c8a035c06984630bd7479d963 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Sat, 4 Jun 2011 14:14:41 -0300 Subject: [media] imon: fix initial panel key repeat suppression As pointed out on the lirc list by Andreas Dick, initial panel key repeat suppression wasn't working, as we had no timevals accumulated until after the first repeat. Also add a missing locking call. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 43344fd..7136582 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1590,16 +1590,16 @@ static void imon_incoming_packet(struct imon_context *ictx, /* Only panel type events left to process now */ spin_lock_irqsave(&ictx->kc_lock, flags); + do_gettimeofday(&t); /* KEY_MUTE repeats from knob need to be suppressed */ if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) { - do_gettimeofday(&t); msec = tv2int(&t, &prev_time); - prev_time = t; if (msec < ictx->idev->rep[REP_DELAY]) { spin_unlock_irqrestore(&ictx->kc_lock, flags); return; } } + prev_time = t; kc = ictx->kc; spin_unlock_irqrestore(&ictx->kc_lock, flags); @@ -1611,7 +1611,9 @@ static void imon_incoming_packet(struct imon_context *ictx, input_report_key(ictx->idev, kc, 0); input_sync(ictx->idev); + spin_lock_irqsave(&ictx->kc_lock, flags); ictx->last_keycode = kc; + spin_unlock_irqrestore(&ictx->kc_lock, flags); return; -- cgit v0.10.2 From cfd77310a93aac6de7077335b2b73c19531043e4 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 2 Jun 2011 06:18:34 -0300 Subject: [media] s5p-fimc: Fix possible memory leak during capture devnode registration Add missing kfree on the error path. Reported-by: Tomasz Stanislawski Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index d142b40..7e66455 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -903,6 +903,7 @@ err_vd_reg: err_v4l2_reg: v4l2_device_unregister(v4l2_dev); err_info: + kfree(ctx); dev_err(&fimc->pdev->dev, "failed to install\n"); return ret; } -- cgit v0.10.2 From 6ba8d13b0cff80ea6da18563fc2aa2cde2771be4 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 18 May 2011 14:14:56 -0300 Subject: [media] s5p-fimc: Fix V4L2_PIX_FMT_RGB565X description Remove V4L2_MBUS_FMT_RGB565_2X8_BE media code entry as camera interface supports only packed YUYV formats. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index dc91a85..f1c7119 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -42,7 +42,6 @@ static struct fimc_fmt fimc_formats[] = { .color = S5P_FIMC_RGB565, .memplanes = 1, .colplanes = 1, - .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_BE, .flags = FMT_FLAGS_M2M, }, { .name = "BGR666", -- cgit v0.10.2 From 3495dcefeb3b5ab825788206d5b696be14f4de19 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 20 May 2011 06:14:59 -0300 Subject: [media] s5p-fimc: Fix data structures documentation and cleanup debug trace Correct inconsistencies in data structures' documentation. Remove meaningless debug traces. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 7e66455..44fc26f 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -262,12 +262,7 @@ static unsigned int get_plane_size(struct fimc_frame *fr, unsigned int plane) { if (!fr || plane >= fr->fmt->memplanes) return 0; - - dbg("%s: w: %d. h: %d. depth[%d]: %d", - __func__, fr->width, fr->height, plane, fr->fmt->depth[plane]); - return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8; - } static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, @@ -283,12 +278,8 @@ static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, *num_planes = fmt->memplanes; - dbg("%s, buffer count=%d, plane count=%d", - __func__, *num_buffers, *num_planes); - for (i = 0; i < fmt->memplanes; i++) { sizes[i] = get_plane_size(&ctx->d_frame, i); - dbg("plane: %u, plane_size: %lu", i, sizes[i]); allocators[i] = ctx->fimc_dev->alloc_ctx; } diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index f1c7119..c427edd 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -231,11 +231,7 @@ static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift) return 0; } } - *shift = 0, *ratio = 1; - - dbg("s: %d, t: %d, shift: %d, ratio: %d", - src, tar, *shift, *ratio); return 0; } @@ -267,10 +263,8 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx) err("invalid source size: %d x %d", sx, sy); return -EINVAL; } - sc->real_width = sx; sc->real_height = sy; - dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty); ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor); if (ret) diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h index 3beb1e5..8f0f168 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/video/s5p-fimc/fimc-core.h @@ -135,9 +135,10 @@ enum fimc_color_fmt { * @name: format description * @fourcc: the fourcc code for this format, 0 if not applicable * @color: the corresponding fimc_color_fmt - * @depth: per plane driver's private 'number of bits per pixel' * @memplanes: number of physically non-contiguous data planes * @colplanes: number of physically contiguous data planes + * @depth: per plane driver's private 'number of bits per pixel' + * @flags: flags indicating which operation mode format applies to */ struct fimc_fmt { enum v4l2_mbus_pixelcode mbus_code; @@ -171,7 +172,7 @@ struct fimc_dma_offset { }; /** - * struct fimc_effect - the configuration data for the "Arbitrary" image effect + * struct fimc_effect - color effect information * @type: effect type * @pat_cb: cr value when type is "arbitrary" * @pat_cr: cr value when type is "arbitrary" @@ -184,7 +185,6 @@ struct fimc_effect { /** * struct fimc_scaler - the configuration data for FIMC inetrnal scaler - * * @scaleup_h: flag indicating scaling up horizontally * @scaleup_v: flag indicating scaling up vertically * @copy_mode: flag indicating transparent DMA transfer (no scaling @@ -220,7 +220,6 @@ struct fimc_scaler { /** * struct fimc_addr - the FIMC physical address set for DMA - * * @y: luminance plane physical address * @cb: Cb plane physical address * @cr: Cr plane physical address @@ -234,6 +233,7 @@ struct fimc_addr { /** * struct fimc_vid_buffer - the driver's video buffer * @vb: v4l videobuf buffer + * @list: linked list structure for buffer queue * @paddr: precalculated physical address set * @index: buffer index for the output DMA engine */ @@ -254,11 +254,10 @@ struct fimc_vid_buffer { * @offs_v: image vertical pixel offset * @width: image pixel width * @height: image pixel weight - * @paddr: image frame buffer physical addresses - * @buf_cnt: number of buffers depending on a color format * @payload: image size in bytes (w x h x bpp) - * @color: color format + * @paddr: image frame buffer physical addresses * @dma_offset: DMA offset in bytes + * @fmt: fimc color format pointer */ struct fimc_frame { u32 f_width; @@ -390,21 +389,22 @@ struct fimc_ctx; /** * struct fimc_dev - abstraction for FIMC entity - * * @slock: the spinlock protecting this data structure * @lock: the mutex protecting this data structure * @pdev: pointer to the FIMC platform device * @pdata: pointer to the device platform data + * @variant: the IP variant information * @id: FIMC device index (0..FIMC_MAX_DEVS) * @num_clocks: the number of clocks managed by this device instance - * @clock[]: the clocks required for FIMC operation + * @clock: clocks required for FIMC operation * @regs: the mapped hardware registers * @regs_res: the resource claimed for IO registers - * @irq: interrupt number of the FIMC subdevice - * @irq_queue: + * @irq: FIMC interrupt number + * @irq_queue: interrupt handler waitqueue * @m2m: memory-to-memory V4L2 device information * @vid_cap: camera capture device information * @state: flags used to synchronize m2m and capture mode operation + * @alloc_ctx: videobuf2 memory allocator context */ struct fimc_dev { spinlock_t slock; @@ -427,8 +427,7 @@ struct fimc_dev { /** * fimc_ctx - the device context data - * - * @lock: mutex protecting this data structure + * @slock: spinlock protecting this data structure * @s_frame: source frame properties * @d_frame: destination frame properties * @out_order_1p: output 1-plane YCBCR order -- cgit v0.10.2 From a629f86b4aa1669ddf2afaa3ded66d5a59d60b77 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 23 May 2011 09:15:05 -0300 Subject: [media] s5p-fimc: Fix wrong buffer size in queue_setup Avoid dereferencing of NULL f->fmt. Correct size of the allocated buffer in case the crop rectangle is smaller than the bounds rectangle (configured with S_FMT). Also remove redundant check for *num_buffer == 0 as this case is handled in videobuf2. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index c427edd..85b47a3 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -704,22 +704,18 @@ static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, f = ctx_get_frame(ctx, vq->type); if (IS_ERR(f)) return PTR_ERR(f); - /* * Return number of non-contigous planes (plane buffers) * depending on the configured color format. */ - if (f->fmt) - *num_planes = f->fmt->memplanes; + if (!f->fmt) + return -EINVAL; + *num_planes = f->fmt->memplanes; for (i = 0; i < f->fmt->memplanes; i++) { - sizes[i] = (f->width * f->height * f->fmt->depth[i]) >> 3; + sizes[i] = (f->f_width * f->f_height * f->fmt->depth[i]) / 8; allocators[i] = ctx->fimc_dev->alloc_ctx; } - - if (*num_buffers == 0) - *num_buffers = 1; - return 0; } -- cgit v0.10.2 From dbdd0dfb89ca45895f2063db8b31085cf32aa81d Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 23 May 2011 09:15:17 -0300 Subject: [media] s5p-fimc: Remove empty buf_init operation The buf_init buffer queue operation is optional and buffer_init() does nothing, remove it. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 44fc26f..6901643 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -286,12 +286,6 @@ static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, return 0; } -static int buffer_init(struct vb2_buffer *vb) -{ - /* TODO: */ - return 0; -} - static int buffer_prepare(struct vb2_buffer *vb) { struct vb2_queue *vq = vb->vb2_queue; @@ -371,7 +365,6 @@ static struct vb2_ops fimc_capture_qops = { .queue_setup = queue_setup, .buf_prepare = buffer_prepare, .buf_queue = buffer_queue, - .buf_init = buffer_init, .wait_prepare = fimc_unlock, .wait_finish = fimc_lock, .start_streaming = start_streaming, -- cgit v0.10.2 From ba0545e328390b9e5589c14876b3940fbe647d0c Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 20 May 2011 14:02:11 -0300 Subject: [media] s5p-fimc: Use pix_mp for the color format lookup With multi-planar formats fmt.pix_mp member of struct v4l2_format should be used rather than fmt.pix. Fix find_fmt() function to do the right thing. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 85b47a3..873a879 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -841,7 +841,7 @@ struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask) for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) { fmt = &fimc_formats[i]; - if (fmt->fourcc == f->fmt.pix.pixelformat && + if (fmt->fourcc == f->fmt.pix_mp.pixelformat && (fmt->flags & mask)) break; } -- cgit v0.10.2 From 3a3f94497aa236d9a4f47f0f4f8dc84e531ffa22 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 28 Apr 2011 09:06:19 -0300 Subject: [media] s5p-fimc: Update copyright notices Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 6901643..81b4a82 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -1,7 +1,7 @@ /* - * Samsung S5P SoC series camera interface (camera capture) driver + * Samsung S5P/EXYNOS4 SoC series camera interface (camera capture) driver * - * Copyright (c) 2010 Samsung Electronics Co., Ltd + * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. * Author: Sylwester Nawrocki, * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 873a879..bdf19ad 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -1,9 +1,8 @@ /* - * S5P camera interface (video postprocessor) driver + * Samsung S5P/EXYNOS4 SoC series camera interface (video postprocessor) driver * - * Copyright (c) 2010 Samsung Electronics Co., Ltd - * - * Sylwester Nawrocki, + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * Contact: Sylwester Nawrocki, * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h index 8f0f168..1f70772 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/video/s5p-fimc/fimc-core.h @@ -1,7 +1,5 @@ /* - * Copyright (c) 2010 Samsung Electronics - * - * Sylwester Nawrocki, + * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- cgit v0.10.2 From bbe66edc607425acc47d7ad69ba7ad7193ec05b4 Mon Sep 17 00:00:00 2001 From: "HeungJun, Kim" Date: Tue, 31 May 2011 02:27:53 -0300 Subject: [media] m5mols: Fix capture image size register definition The main capture and the thumbnail image size registers were erroneously defined to have 1 byte width, resulting in wrong reported image size. Fix this by changing the registers width to correct value. Reported-by: Sylwester Nawrocki Signed-off-by: HeungJun, Kim Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h index b83e36f..8260f50 100644 --- a/drivers/media/video/m5mols/m5mols_reg.h +++ b/drivers/media/video/m5mols/m5mols_reg.h @@ -382,8 +382,8 @@ #define REG_CAP_START_MAIN 0x01 #define REG_CAP_START_THUMB 0x03 -#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1) -#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1) +#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4) +#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4) /* * Category F - Flash -- cgit v0.10.2 From 57644f56234a154afffd0f4d53becf8ff4a55b41 Mon Sep 17 00:00:00 2001 From: "HeungJun, Kim" Date: Tue, 31 May 2011 03:44:19 -0300 Subject: [media] m5mols: add m5mols_read_u8/u16/u32() according to I2C byte width For now, the m5mols_read() share in case of I2C packet 1, 2, 4 byte(s) width. So, this commit adds 3 functions - m5mols_read_u8/u16/u32() according to byte width of I2C packet. And, the u32 variables in spite of u8 or u16 for fitting to m5mols_read() having no choice, is replaced to have original byte width like u8, u16, u32 as same reason. Signed-off-by: HeungJun, Kim Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h index 10b55c8..dbe8928 100644 --- a/drivers/media/video/m5mols/m5mols.h +++ b/drivers/media/video/m5mols/m5mols.h @@ -106,23 +106,23 @@ struct m5mols_capture { * The each value according to each scenemode is recommended in the documents. */ struct m5mols_scenemode { - u32 metering; - u32 ev_bias; - u32 wb_mode; - u32 wb_preset; - u32 chroma_en; - u32 chroma_lvl; - u32 edge_en; - u32 edge_lvl; - u32 af_range; - u32 fd_mode; - u32 mcc; - u32 light; - u32 flash; - u32 tone; - u32 iso; - u32 capt_mode; - u32 wdr; + u8 metering; + u8 ev_bias; + u8 wb_mode; + u8 wb_preset; + u8 chroma_en; + u8 chroma_lvl; + u8 edge_en; + u8 edge_lvl; + u8 af_range; + u8 fd_mode; + u8 mcc; + u8 light; + u8 flash; + u8 tone; + u8 iso; + u8 capt_mode; + u8 wdr; }; /** @@ -216,9 +216,9 @@ struct m5mols_info { bool lock_ae; bool lock_awb; u8 resolution; - u32 interrupt; - u32 mode; - u32 mode_save; + u8 interrupt; + u8 mode; + u8 mode_save; int (*set_power)(struct device *dev, int on); }; @@ -256,9 +256,11 @@ struct m5mols_info { * +-------+---+----------+-----+------+------+------+------+ * - d[0..3]: according to size1 */ -int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val); +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val); +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val); -int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value); +int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 value); /* * Mode operation of the M-5MOLS @@ -280,12 +282,12 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value); * The available executing order between each modes are as follows: * PARAMETER <---> MONITOR <---> CAPTURE */ -int m5mols_mode(struct m5mols_info *info, u32 mode); +int m5mols_mode(struct m5mols_info *info, u8 mode); -int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg); +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg); int m5mols_sync_controls(struct m5mols_info *info); int m5mols_start_capture(struct m5mols_info *info); -int m5mols_do_scenemode(struct m5mols_info *info, u32 mode); +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode); int m5mols_lock_3a(struct m5mols_info *info, bool lock); int m5mols_set_ctrl(struct v4l2_ctrl *ctrl); diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c index d71a390..751f459 100644 --- a/drivers/media/video/m5mols/m5mols_capture.c +++ b/drivers/media/video/m5mols/m5mols_capture.c @@ -58,9 +58,9 @@ static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num, { u32 num, den; - int ret = m5mols_read(sd, addr_num, &num); + int ret = m5mols_read_u32(sd, addr_num, &num); if (!ret) - ret = m5mols_read(sd, addr_den, &den); + ret = m5mols_read_u32(sd, addr_den, &den); if (ret) return ret; *val = den == 0 ? 0 : num / den; @@ -99,20 +99,20 @@ static int m5mols_capture_info(struct m5mols_info *info) if (ret) return ret; - ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed); + ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed); if (!ret) - ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash); + ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash); if (!ret) - ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr); + ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr); if (!ret) - ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval); + ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval); if (ret) return ret; if (!ret) - ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main); + ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main); if (!ret) - ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb); + ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb); if (!ret) info->cap.total = info->cap.main + info->cap.thumb; @@ -122,7 +122,7 @@ static int m5mols_capture_info(struct m5mols_info *info) int m5mols_start_capture(struct m5mols_info *info) { struct v4l2_subdev *sd = &info->sd; - u32 resolution = info->resolution; + u8 resolution = info->resolution; int timeout; int ret; diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c index 817c16f..d392c83 100644 --- a/drivers/media/video/m5mols/m5mols_controls.c +++ b/drivers/media/video/m5mols/m5mols_controls.c @@ -130,7 +130,7 @@ static struct m5mols_scenemode m5mols_default_scenemode[] = { * * WARNING: The execution order is important. Do not change the order. */ -int m5mols_do_scenemode(struct m5mols_info *info, u32 mode) +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode) { struct v4l2_subdev *sd = &info->sd; struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode]; diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 76eac26..2b1f23f 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -133,13 +133,13 @@ static u32 m5mols_swap_byte(u8 *data, u8 length) /** * m5mols_read - I2C read function * @reg: combination of size, category and command for the I2C packet + * @size: desired size of I2C packet * @val: read value */ -int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val) +static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val) { struct i2c_client *client = v4l2_get_subdevdata(sd); u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1]; - u8 size = I2C_SIZE(reg); u8 category = I2C_CATEGORY(reg); u8 cmd = I2C_COMMAND(reg); struct i2c_msg msg[2]; @@ -149,11 +149,6 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val) if (!client->adapter) return -ENODEV; - if (size != 1 && size != 2 && size != 4) { - v4l2_err(sd, "Wrong data size\n"); - return -EINVAL; - } - msg[0].addr = client->addr; msg[0].flags = 0; msg[0].len = 5; @@ -184,6 +179,52 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val) return 0; } +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val) +{ + u32 val_32; + int ret; + + if (I2C_SIZE(reg) != 1) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); + if (ret) + return ret; + + *val = (u8)val_32; + return ret; +} + +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val) +{ + u32 val_32; + int ret; + + if (I2C_SIZE(reg) != 2) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); + if (ret) + return ret; + + *val = (u16)val_32; + return ret; +} + +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val) +{ + if (I2C_SIZE(reg) != 4) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + return m5mols_read(sd, I2C_SIZE(reg), reg, val); +} + /** * m5mols_write - I2C command write function * @reg: combination of size, category and command for the I2C packet @@ -231,13 +272,14 @@ int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val) return 0; } -int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask) +int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 mask) { - u32 busy, i; + u8 busy; + int i; int ret; for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) { - ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy); + ret = m5mols_read_u8(sd, I2C_REG(category, cmd, 1), &busy); if (ret < 0) return ret; if ((busy & mask) == mask) @@ -252,14 +294,14 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask) * Before writing desired interrupt value the INT_FACTOR register should * be read to clear pending interrupts. */ -int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg) +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg) { struct m5mols_info *info = to_m5mols(sd); - u32 mask = is_available_af(info) ? REG_INT_AF : 0; - u32 dummy; + u8 mask = is_available_af(info) ? REG_INT_AF : 0; + u8 dummy; int ret; - ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy); + ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy); if (!ret) ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask); return ret; @@ -271,7 +313,7 @@ int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg) * It always accompanies a little delay changing the M-5MOLS mode, so it is * needed checking current busy status to guarantee right mode. */ -static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode) +static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode) { int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode); @@ -286,16 +328,16 @@ static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode) * can be guaranteed only when the sensor is operating in mode which which * a command belongs to. */ -int m5mols_mode(struct m5mols_info *info, u32 mode) +int m5mols_mode(struct m5mols_info *info, u8 mode) { struct v4l2_subdev *sd = &info->sd; int ret = -EINVAL; - u32 reg; + u8 reg; if (mode < REG_PARAMETER && mode > REG_CAPTURE) return ret; - ret = m5mols_read(sd, SYSTEM_SYSMODE, ®); + ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®); if ((!ret && reg == mode) || ret) return ret; @@ -348,28 +390,24 @@ static int m5mols_get_version(struct v4l2_subdev *sd) struct m5mols_version ver; u8 bytes[VERSION_SIZE]; } version; - u32 *value; u8 cmd = CAT0_VER_CUSTOMER; int ret; do { - value = (u32 *)&version.bytes[cmd]; - ret = m5mols_read(sd, SYSTEM_CMD(cmd), value); + ret = m5mols_read_u8(sd, SYSTEM_CMD(cmd), &version.bytes[cmd]); if (ret) return ret; } while (cmd++ != CAT0_VER_AWB); do { - value = (u32 *)&version.bytes[cmd]; - ret = m5mols_read(sd, SYSTEM_VER_STRING, value); + ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &version.bytes[cmd]); if (ret) return ret; if (cmd >= VERSION_SIZE - 1) return -EINVAL; } while (version.bytes[cmd++]); - value = (u32 *)&version.bytes[cmd]; - ret = m5mols_read(sd, AF_VERSION, value); + ret = m5mols_read_u8(sd, AF_VERSION, &version.bytes[cmd]); if (ret) return ret; @@ -722,7 +760,7 @@ static int m5mols_init_controls(struct m5mols_info *info) int ret; /* Determine value's range & step of controls for various FW version */ - ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure); + ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &max_exposure); if (!ret) step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1; if (ret) @@ -842,18 +880,18 @@ static void m5mols_irq_work(struct work_struct *work) struct m5mols_info *info = container_of(work, struct m5mols_info, work_irq); struct v4l2_subdev *sd = &info->sd; - u32 reg; + u8 reg; int ret; if (!is_powered(info) || - m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt)) + m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &info->interrupt)) return; switch (info->interrupt & REG_INT_MASK) { case REG_INT_AF: if (!is_available_af(info)) break; - ret = m5mols_read(sd, AF_STATUS, ®); + ret = m5mols_read_u8(sd, AF_STATUS, ®); v4l2_dbg(2, m5mols_debug, sd, "AF %s\n", reg == REG_AF_FAIL ? "Failed" : reg == REG_AF_SUCCESS ? "Success" : -- cgit v0.10.2 From a6354d2e5da646926ce492b66b527a1efc39cd27 Mon Sep 17 00:00:00 2001 From: "HeungJun, Kim" Date: Tue, 7 Jun 2011 01:59:44 -0300 Subject: [media] m5mols: remove union in the m5mols_get_version(), and VERSION_SIZE Remove union version in the m5mols_get_version(), and read version information directly. Also remove VERSION_SIZE. Signed-off-by: HeungJun, Kim Signed-off-by: Kyungmin Park Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h index dbe8928..9ae1709 100644 --- a/drivers/media/video/m5mols/m5mols.h +++ b/drivers/media/video/m5mols/m5mols.h @@ -154,7 +154,6 @@ struct m5mols_version { u8 str[VERSION_STRING_SIZE]; u8 af; }; -#define VERSION_SIZE sizeof(struct m5mols_version) /** * struct m5mols_info - M-5MOLS driver data structure diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 2b1f23f..9815f2c 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -386,37 +386,37 @@ int m5mols_mode(struct m5mols_info *info, u8 mode) static int m5mols_get_version(struct v4l2_subdev *sd) { struct m5mols_info *info = to_m5mols(sd); - union { - struct m5mols_version ver; - u8 bytes[VERSION_SIZE]; - } version; - u8 cmd = CAT0_VER_CUSTOMER; + struct m5mols_version *ver = &info->ver; + u8 *str = ver->str; + int i; int ret; - do { - ret = m5mols_read_u8(sd, SYSTEM_CMD(cmd), &version.bytes[cmd]); - if (ret) - return ret; - } while (cmd++ != CAT0_VER_AWB); + ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer); + if (!ret) + ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb); + if (!ret) + ret = m5mols_read_u8(sd, AF_VERSION, &ver->af); + if (ret) + return ret; - do { - ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &version.bytes[cmd]); + for (i = 0; i < VERSION_STRING_SIZE; i++) { + ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]); if (ret) return ret; - if (cmd >= VERSION_SIZE - 1) - return -EINVAL; - } while (version.bytes[cmd++]); - - ret = m5mols_read_u8(sd, AF_VERSION, &version.bytes[cmd]); - if (ret) - return ret; + } - /* store version information swapped for being readable */ - info->ver = version.ver; - info->ver.fw = be16_to_cpu(info->ver.fw); - info->ver.hw = be16_to_cpu(info->ver.hw); - info->ver.param = be16_to_cpu(info->ver.param); - info->ver.awb = be16_to_cpu(info->ver.awb); + ver->fw = be16_to_cpu(ver->fw); + ver->hw = be16_to_cpu(ver->hw); + ver->param = be16_to_cpu(ver->param); + ver->awb = be16_to_cpu(ver->awb); v4l2_info(sd, "Manufacturer\t[%s]\n", is_manufacturer(info, REG_SAMSUNG_ELECTRO) ? diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h index 8260f50..5f5bdcf 100644 --- a/drivers/media/video/m5mols/m5mols_reg.h +++ b/drivers/media/video/m5mols/m5mols_reg.h @@ -56,13 +56,24 @@ * more specific contents, see definition if file m5mols.h. */ #define CAT0_VER_CUSTOMER 0x00 /* customer version */ -#define CAT0_VER_AWB 0x09 /* Auto WB version */ +#define CAT0_VER_PROJECT 0x01 /* project version */ +#define CAT0_VER_FIRMWARE 0x02 /* Firmware version */ +#define CAT0_VER_HARDWARE 0x04 /* Hardware version */ +#define CAT0_VER_PARAMETER 0x06 /* Parameter version */ +#define CAT0_VER_AWB 0x08 /* Auto WB version */ #define CAT0_VER_STRING 0x0a /* string including M-5MOLS */ #define CAT0_SYSMODE 0x0b /* SYSTEM mode register */ #define CAT0_STATUS 0x0c /* SYSTEM mode status register */ #define CAT0_INT_FACTOR 0x10 /* interrupt pending register */ #define CAT0_INT_ENABLE 0x11 /* interrupt enable register */ +#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, CAT0_VER_CUSTOMER, 1) +#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, CAT0_VER_PROJECT, 1) +#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, CAT0_VER_FIRMWARE, 2) +#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, CAT0_VER_HARDWARE, 2) +#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, CAT0_VER_PARAMETER, 2) +#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, CAT0_VER_AWB, 2) + #define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1) #define REG_SYSINIT 0x00 /* SYSTEM mode */ #define REG_PARAMETER 0x01 /* PARAMETER mode */ -- cgit v0.10.2 From c30701130cf7bff4f97a148b1bc96f878c046a40 Mon Sep 17 00:00:00 2001 From: "HeungJun, Kim" Date: Tue, 7 Jun 2011 02:00:58 -0300 Subject: [media] m5mols: Use proper email address format Signed-off-by: HeungJun, Kim Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h index 9ae1709..89d09a8 100644 --- a/drivers/media/video/m5mols/m5mols.h +++ b/drivers/media/video/m5mols/m5mols.h @@ -2,10 +2,10 @@ * Header for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c index 751f459..d947192 100644 --- a/drivers/media/video/m5mols/m5mols_capture.c +++ b/drivers/media/video/m5mols/m5mols_capture.c @@ -2,10 +2,10 @@ * The Capture code for Fujitsu M-5MOLS ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c index d392c83..d135d20 100644 --- a/drivers/media/video/m5mols/m5mols_controls.c +++ b/drivers/media/video/m5mols/m5mols_controls.c @@ -2,10 +2,10 @@ * Controls for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 9815f2c..43c68f5 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -2,10 +2,10 @@ * Driver for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h index 5f5bdcf..c755bd6 100644 --- a/drivers/media/video/m5mols/m5mols_reg.h +++ b/drivers/media/video/m5mols/m5mols_reg.h @@ -2,10 +2,10 @@ * Register map for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/include/media/m5mols.h b/include/media/m5mols.h index 2d7e7ca..aac2c0e 100644 --- a/include/media/m5mols.h +++ b/include/media/m5mols.h @@ -2,10 +2,10 @@ * Driver header for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v0.10.2 From e76e4706cf9051e4db12c3d4418fcfbb053fc463 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 2 Jun 2011 04:52:07 -0300 Subject: [media] MAINTAINERS: Add videobuf2 maintainers Add maintainers for the videobuf2 V4L2 driver framework. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab diff --git a/MAINTAINERS b/MAINTAINERS index 29801f7..63be58b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6720,6 +6720,15 @@ S: Maintained F: Documentation/filesystems/vfat.txt F: fs/fat/ +VIDEOBUF2 FRAMEWORK +M: Pawel Osciak +M: Marek Szyprowski +M: Kyungmin Park +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/video/videobuf2-* +F: include/media/videobuf2-* + VIRTIO CONSOLE DRIVER M: Amit Shah L: virtualization@lists.linux-foundation.org -- cgit v0.10.2 From c0da00145f9a32ef33b14508e6fd90fc130afbdc Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Sun, 12 Jun 2011 17:26:17 +0200 Subject: ALSA: hdspm - Fix locking in snd_hdspm_midi_input_read For the MIDI part, we need to acquire (and release) the hmidi->lock, access to the global hdspm structure is serialized through hmidi->hdspm->lock instead. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 949691a..32d80af 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -1639,12 +1639,14 @@ static int snd_hdspm_midi_input_read (struct hdspm_midi *hmidi) } } hmidi->pending = 0; + spin_unlock_irqrestore(&hmidi->lock, flags); + spin_lock_irqsave(&hmidi->hdspm->lock, flags); hmidi->hdspm->control_register |= hmidi->ie; hdspm_write(hmidi->hdspm, HDSPM_controlRegister, hmidi->hdspm->control_register); + spin_unlock_irqrestore(&hmidi->hdspm->lock, flags); - spin_unlock_irqrestore (&hmidi->lock, flags); return snd_hdspm_midi_output_write (hmidi); } -- cgit v0.10.2 From fedf1535ab5ee02acbbc235c2272d84bb9334758 Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Sun, 12 Jun 2011 17:26:18 +0200 Subject: ALSA: hdspm - Fix jumping external wordclock frequency in AutoSync mode When using Word Clock on RME MADI cards, AutoSync mode was alternating betweeen MADI and WC due to a typo: AutoSync is indicated in the second status register (status2), not the first one (status). While the proc output was always correct, the reported WC frequency to ALSA was unstable as mentioned in http://mailman.alsa-project.org/pipermail/alsa-devel/2008-March/006723.html Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 32d80af..d03ef94 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -1143,7 +1143,7 @@ static int hdspm_external_sample_rate(struct hdspm *hdspm) /* if wordclock has synced freq and wordclock is valid */ if ((status2 & HDSPM_wcLock) != 0 && - (status & HDSPM_SelSyncRef0) == 0) { + (status2 & HDSPM_SelSyncRef0) == 0) { rate_bits = status2 & HDSPM_wcFreqMask; -- cgit v0.10.2 From efef054e8c4bc4fd48a0b4deb5491116d9f557c7 Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Sun, 12 Jun 2011 17:26:19 +0200 Subject: ALSA: hdspm - Add firmware revision ID for RME MADI PCI version The PCI version of the RME HDSP MADI card uses 0xcf as revision ID. Just add this to the list of supported cards. Signed-off-by: Adrian Knoth Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index d03ef94..3f08afc 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -521,6 +521,7 @@ MODULE_SUPPORTED_DEVICE("{{RME HDSPM-MADI}}"); #define HDSPM_DMA_AREA_KILOBYTES (HDSPM_DMA_AREA_BYTES/1024) /* revisions >= 230 indicate AES32 card */ +#define HDSPM_MADI_OLD_REV 207 #define HDSPM_MADI_REV 210 #define HDSPM_RAYDAT_REV 211 #define HDSPM_AIO_REV 212 @@ -6379,6 +6380,7 @@ static int __devinit snd_hdspm_create(struct snd_card *card, switch (hdspm->firmware_rev) { case HDSPM_MADI_REV: + case HDSPM_MADI_OLD_REV: hdspm->io_type = MADI; hdspm->card_name = "RME MADI"; hdspm->midiPorts = 3; -- cgit v0.10.2 From ac5d4b404e78bd7eb67fc70c2acb437a25497e98 Mon Sep 17 00:00:00 2001 From: Florian Zeitz Date: Sun, 12 Jun 2011 01:15:42 +0200 Subject: ALSA: emu10k1: Add details for E-mu 0404 PCIe version This patch adds the necessary details to support the PCIe version of E-MU's 0404 card. From comparing the PCBs it seems the PCIe version just added a PCIe chipset and left all other components pretty much in place. For anyone intrigued to take a look at the PCB there are pictures I took at . Signed-off-by: Florian Zeitz Signed-off-by: Takashi Iwai diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 5e619a8..15f0161 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1440,6 +1440,14 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0102_chip = 1, .spk71 = 1, .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 */ + /* EMU0404 PCIe */ + {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40051102, + .driver = "Audigy2", .name = "E-mu 0404 PCIe [MAEM8984]", + .id = "EMU0404", + .emu10k2_chip = 1, + .ca0108_chip = 1, + .spk71 = 1, + .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 PCIe ver_03 */ /* Note that all E-mu cards require kernel 2.6 or newer. */ {.vendor = 0x1102, .device = 0x0008, .driver = "Audigy2", .name = "SB Audigy 2 Value [Unknown]", -- cgit v0.10.2 From b84bd27fe70206f9253c395958134e4e4b7e55f0 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Sun, 12 Jun 2011 08:22:08 +0200 Subject: HID: hid-multitouch: fix broken eGalax Since the inclusion of eGalax devices in 2.6.39, I've got some bug reports for 480d and other devices. The problem lies in the reports descriptors: eGalax supports both pen and fingers, and so the reports descriptors contained both. But hid-multitouch relies on them to detect the last item in each field to send the multitouch events. In 480d, the last item is not Y as it should but Pressure. That means that the fields are not aligned and X,Y are at 0,0 (the other touch coordinates of the report). With this patch, the detection is made only when the field ContactID has been detected inside the collection. There is still a problem with the detections of the range as stylus and fingers may not have the same min/max, but it's a start. Signed-off-by: Benjamin Tissoires Reviewed-by: Henrik Rydberg Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 8bc32a0..0b2dcd0 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -64,6 +64,7 @@ struct mt_device { struct mt_class *mtclass; /* our mt device class */ unsigned last_field_index; /* last field index of the report */ unsigned last_slot_field; /* the last field of a slot */ + int last_mt_collection; /* last known mt-related collection */ __s8 inputmode; /* InputMode HID feature, -1 if non-existent */ __u8 num_received; /* how many contacts we received */ __u8 num_expected; /* expected last contact index */ @@ -225,8 +226,10 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, cls->sn_move); /* touchscreen emulation */ set_abs(hi->input, ABS_X, field, cls->sn_move); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_GD_Y: if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP) @@ -237,8 +240,10 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, cls->sn_move); /* touchscreen emulation */ set_abs(hi->input, ABS_Y, field, cls->sn_move); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; } return 0; @@ -246,31 +251,40 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_UP_DIGITIZER: switch (usage->hid) { case HID_DG_INRANGE: - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_CONFIDENCE: - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_TIPSWITCH: hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH); input_set_capability(hi->input, EV_KEY, BTN_TOUCH); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_CONTACTID: input_mt_init_slots(hi->input, td->maxcontacts); td->last_slot_field = usage->hid; td->last_field_index = field->index; + td->last_mt_collection = usage->collection_index; return 1; case HID_DG_WIDTH: hid_map_usage(hi, usage, bit, max, EV_ABS, ABS_MT_TOUCH_MAJOR); set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field, cls->sn_width); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_HEIGHT: hid_map_usage(hi, usage, bit, max, @@ -279,8 +293,10 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, cls->sn_height); input_set_abs_params(hi->input, ABS_MT_ORIENTATION, 0, 1, 0, 0); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_TIPPRESSURE: if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP) @@ -292,16 +308,20 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, /* touchscreen emulation */ set_abs(hi->input, ABS_PRESSURE, field, cls->sn_pressure); - td->last_slot_field = usage->hid; - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) { + td->last_slot_field = usage->hid; + td->last_field_index = field->index; + } return 1; case HID_DG_CONTACTCOUNT: - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) + td->last_field_index = field->index; return 1; case HID_DG_CONTACTMAX: /* we don't set td->last_slot_field as contactcount and * contact max are global to the report */ - td->last_field_index = field->index; + if (td->last_mt_collection == usage->collection_index) + td->last_field_index = field->index; return -1; } /* let hid-input decide for the others */ @@ -516,6 +536,7 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) } td->mtclass = mtclass; td->inputmode = -1; + td->last_mt_collection = -1; hid_set_drvdata(hdev, td); ret = hid_parse(hdev); -- cgit v0.10.2 From 1fb74cda1b5e9c6207225fda5ef7504e815ce0e0 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Sun, 12 Jun 2011 22:44:10 -0400 Subject: jbd2: Remove obsolete parameters in the comments for some jbd2 functions credits isn't a parameter for jbd2_journal_get_write_access and jbd2_journal_get_undo_access. So remove the corresponding comments. Acked-by: Jan Kara Cc: Randy Dunlap Signed-off-by: Tao Ma Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 3eec82d..547b101 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -814,7 +814,6 @@ out: * int jbd2_journal_get_write_access() - notify intent to modify a buffer for metadata (not data) update. * @handle: transaction to add buffer modifications to * @bh: bh to be used for metadata writes - * @credits: variable that will receive credits for the buffer * * Returns an error code or 0 on success. * @@ -932,7 +931,6 @@ out: * non-rewindable consequences * @handle: transaction * @bh: buffer to undo - * @credits: store the number of taken credits here (if not NULL) * * Sometimes there is a need to distinguish between metadata which has * been committed to disk and that which has not. The ext3fs code uses -- cgit v0.10.2 From 54463a66b91cf491a7c9af612b0e310babc5fa24 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 13 Jun 2011 08:32:06 +0200 Subject: ALSA: hda - Fix wrong auto-mute type for Acer Aspire-one The auto-mute setup for Acer Aspire-one with ALC268 was set wrongly during the clean-up of auto-mute function. Fixed now. Tested-by: Borislav Petkov Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 43fcfbd..61a774b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -13316,9 +13316,8 @@ static void alc268_acer_lc_setup(struct hda_codec *codec) struct alc_spec *spec = codec->spec; spec->autocfg.hp_pins[0] = 0x15; spec->autocfg.speaker_pins[0] = 0x14; - spec->automute_mixer_nid[0] = 0x0f; spec->automute = 1; - spec->automute_mode = ALC_AUTOMUTE_MIXER; + spec->automute_mode = ALC_AUTOMUTE_AMP; spec->ext_mic.pin = 0x18; spec->ext_mic.mux_idx = 0; spec->int_mic.pin = 0x12; -- cgit v0.10.2 From 2308f4add3de9f6c9c9f02e49461e94d84bb200a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 12 Jun 2011 13:02:43 -0700 Subject: ALSA: hda - Fix beep_device compilation warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using static inline functions can reduce compilation messages and macro misuse. sound/pci/hda/patch_conexant.c: In function ‘patch_cxt5045’: sound/pci/hda/patch_conexant.c:1232:3: warning: statement with no effect Signed-off-by: Joe Perches Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h index f1de1ba..4967eab 100644 --- a/sound/pci/hda/hda_beep.h +++ b/sound/pci/hda/hda_beep.h @@ -50,7 +50,12 @@ int snd_hda_enable_beep_device(struct hda_codec *codec, int enable); int snd_hda_attach_beep_device(struct hda_codec *codec, int nid); void snd_hda_detach_beep_device(struct hda_codec *codec); #else -#define snd_hda_attach_beep_device(...) 0 -#define snd_hda_detach_beep_device(...) +static inline int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) +{ + return 0; +} +void snd_hda_detach_beep_device(struct hda_codec *codec) +{ +} #endif #endif -- cgit v0.10.2 From 8f4e0a18682d91abfad72ede3d3cb5f3ebdf54b4 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Mon, 13 Jun 2011 09:06:57 +0200 Subject: IPVS netns exit causes crash in conntrack Quote from Patric Mc Hardy "This looks like nfnetlink.c excited and destroyed the nfnl socket, but ip_vs was still holding a reference to a conntrack. When the conntrack got destroyed it created a ctnetlink event, causing an oops in netlink_has_listeners when trying to use the destroyed nfnetlink socket." If nf_conntrack_netlink is loaded before ip_vs this is not a problem. This patch simply avoids calling ip_vs_conn_drop_conntrack() when netns is dying as suggested by Julian. Signed-off-by: Hans Schillstrom Signed-off-by: Simon Horman diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index bf28ac2..782db27 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -776,8 +776,16 @@ static void ip_vs_conn_expire(unsigned long data) if (cp->control) ip_vs_control_del(cp); - if (cp->flags & IP_VS_CONN_F_NFCT) + if (cp->flags & IP_VS_CONN_F_NFCT) { ip_vs_conn_drop_conntrack(cp); + /* Do not access conntracks during subsys cleanup + * because nf_conntrack_find_get can not be used after + * conntrack cleanup for the net. + */ + smp_rmb(); + if (ipvs->enable) + ip_vs_conn_drop_conntrack(cp); + } ip_vs_pe_put(cp->pe); kfree(cp->pe_data); diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 55af224..24c28d2 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1945,6 +1945,7 @@ static void __net_exit __ip_vs_dev_cleanup(struct net *net) { EnterFunction(2); net_ipvs(net)->enable = 0; /* Disable packet reception */ + smp_wmb(); __ip_vs_sync_cleanup(net); LeaveFunction(2); } -- cgit v0.10.2 From 08e8138adebdd511e0955e8d6c051904bb4082af Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 13 Jun 2011 10:42:49 +0200 Subject: block: Add __attribute__((format(printf...) and fix fallout Use the compiler to verify format strings and arguments. Fix fallout. Signed-off-by: Joe Perches Signed-off-by: Jens Axboe diff --git a/block/blk-throttle.c b/block/blk-throttle.c index a62be8d..3689f83 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -927,7 +927,7 @@ static int throtl_dispatch(struct request_queue *q) bio_list_init(&bio_list_on_stack); - throtl_log(td, "dispatch nr_queued=%lu read=%u write=%u", + throtl_log(td, "dispatch nr_queued=%d read=%u write=%u", total_nr_queued(td), td->nr_queued[READ], td->nr_queued[WRITE]); @@ -1204,7 +1204,7 @@ int blk_throtl_bio(struct request_queue *q, struct bio **biop) } queue_bio: - throtl_log_tg(td, tg, "[%c] bio. bdisp=%u sz=%u bps=%llu" + throtl_log_tg(td, tg, "[%c] bio. bdisp=%llu sz=%u bps=%llu" " iodisp=%u iops=%u queued=%d/%d", rw == READ ? 'R' : 'W', tg->bytes_disp[rw], bio->bi_size, tg->bps[rw], diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 545b8d4..f379943 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -988,9 +988,10 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg, cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime, st->min_vdisktime); - cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u" - " sect=%u", used_sl, cfqq->slice_dispatch, charge, - iops_mode(cfqd), cfqq->nr_sectors); + cfq_log_cfqq(cfqq->cfqd, cfqq, + "sl_used=%u disp=%u charge=%u iops=%u sect=%lu", + used_sl, cfqq->slice_dispatch, charge, + iops_mode(cfqd), cfqq->nr_sectors); cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl, unaccounted_sl); cfq_blkiocg_set_start_empty_time(&cfqg->blkg); @@ -2023,8 +2024,8 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd) */ if (sample_valid(cic->ttime_samples) && (cfqq->slice_end - jiffies < cic->ttime_mean)) { - cfq_log_cfqq(cfqd, cfqq, "Not idling. think_time:%d", - cic->ttime_mean); + cfq_log_cfqq(cfqd, cfqq, "Not idling. think_time:%lu", + cic->ttime_mean); return; } diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index b22fb0d..8c7c2de 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -169,7 +169,8 @@ extern void blk_trace_shutdown(struct request_queue *); extern int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev, struct block_device *bdev, struct blk_user_trace_setup *buts); -extern void __trace_note_message(struct blk_trace *, const char *fmt, ...); +extern __attribute__((format(printf, 2, 3))) +void __trace_note_message(struct blk_trace *, const char *fmt, ...); /** * blk_add_trace_msg - Add a (simple) message to the blktrace stream -- cgit v0.10.2 From d4c208b86b8be4254eba0e74071496e599f94639 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 13 Jun 2011 12:45:48 +0200 Subject: block: use the passed in @bdev when claiming if partno is zero 6b4517a791 (block: implement bd_claiming and claiming block) introduced claiming block to support O_EXCL blkdev opens properly. bd_start_claiming() looks up the part 0 bdev and starts claiming block. The function assumed that there is only one part 0 bdev and always used bdget_disk(disk, 0) to look it up; unfortunately, this isn't true for some drivers (floppy) which use multiple block devices to denote different operating parameters for the same physical device. There can be multiple part 0 bdev's for the same device number. This incorrect assumption caused the wrong bdev to be used during claiming leading to unbalanced bd_holders as reported in the following bug. https://bugzilla.kernel.org/show_bug.cgi?id=28522 This patch updates bd_start_claiming() such that it uses the bdev specified as argument if its partno is zero. Note that this means that different bdev's can be used for the same device and O_EXCL check can be effectively bypassed. It has always been broken that way and floppy is fortunately on its way out. Leave that breakage alone. Signed-off-by: Tejun Heo Reported-by: Alex Villacis Lasso Tested-by: Alex Villacis Lasso Cc: stable@kernel.org # >= v2.6.36 Signed-off-by: Jens Axboe diff --git a/fs/block_dev.c b/fs/block_dev.c index 1a2421f..610e8e0 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -762,7 +762,19 @@ static struct block_device *bd_start_claiming(struct block_device *bdev, if (!disk) return ERR_PTR(-ENXIO); - whole = bdget_disk(disk, 0); + /* + * Normally, @bdev should equal what's returned from bdget_disk() + * if partno is 0; however, some drivers (floppy) use multiple + * bdev's for the same physical device and @bdev may be one of the + * aliases. Keep @bdev if partno is 0. This means claimer + * tracking is broken for those devices but it has always been that + * way. + */ + if (partno) + whole = bdget_disk(disk, 0); + else + whole = bdgrab(bdev); + module_put(disk->fops->owner); put_disk(disk); if (!whole) -- cgit v0.10.2 From 9d5ae7cd6cb9ead43336fec1094184d1dc740fbd Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Fri, 3 Jun 2011 20:24:03 +0000 Subject: omap: pandora: fix NAND support Commit d5ce2b65 "omap3630: nand: fix device size to work in polled mode" changed values for .devsize in nand platform data, now we have to pass NAND_BUSWIDTH_16 instead of '1' to select 16bit NAND. Update pandora's platform data accordingly, also specify appropriate transfer type. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1d10736..a3d655c 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -86,7 +86,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = { static struct omap_nand_platform_data pandora_nand_data = { .cs = 0, - .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */ + .devsize = NAND_BUSWIDTH_16, + .xfer_type = NAND_OMAP_PREFETCH_DMA, .parts = omap3pandora_nand_partitions, .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions), }; -- cgit v0.10.2 From ac08aedfa5d3de0dcb3825b598d16c2e57991f54 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 13 Jun 2011 11:28:50 -0400 Subject: Btrfs: check the return value from set_anon_super Al Viro noticed we weren't checking for set_anon_super failures. This adds the required checks. Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 9f68c68..20c111b 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1312,7 +1312,9 @@ again: spin_lock_init(&root->cache_lock); init_waitqueue_head(&root->cache_wait); - set_anon_super(&root->anon_super, NULL); + ret = set_anon_super(&root->anon_super, NULL); + if (ret) + goto fail; if (btrfs_root_refs(&root->root_item) == 0) { ret = -ENOENT; -- cgit v0.10.2 From f4c44016218a6fce357715b9bbabbbbe1f69853c Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 13 Jun 2011 11:30:47 -0400 Subject: Btrfs: drop the delalloc_bytes check in shrink_delalloc Even when delalloc_bytes is zero, we may need to sleep while waiting for delalloc space. Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index b42efc2..1f61bf5 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3314,10 +3314,6 @@ static int shrink_delalloc(struct btrfs_trans_handle *trans, if (reserved == 0) return 0; - /* nothing to shrink - nothing to reclaim */ - if (root->fs_info->delalloc_bytes == 0) - return 0; - max_reclaim = min(reserved, to_reclaim); while (loops < 1024) { -- cgit v0.10.2 From 6fdf658c9a0e51e6663f2769f6d310c2843a862b Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Mon, 13 Jun 2011 15:37:35 +0300 Subject: Bluetooth: Fix L2CAP security check With older userspace versions (using hciops) it might not have the key type to check if the key has sufficient security for any security level so it is necessary to check the return of hci_conn_auth to make sure the connection is authenticated Signed-off-by: Luiz Augusto von Dentz Acked-by: Johan Hedberg Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 3163330..b9aa986 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -611,8 +611,8 @@ auth: if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) return 0; - hci_conn_auth(conn, sec_level, auth_type); - return 0; + if (!hci_conn_auth(conn, sec_level, auth_type)) + return 0; encrypt: if (conn->link_mode & HCI_LM_ENCRYPT) -- cgit v0.10.2 From e9c039052be59753e6bcc7c8b59763899dc1161c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Jun 2011 19:05:58 +0100 Subject: ASoC: Remove unused and about to be broken SND_SOC_CUSTOM I/O bus This will be removed in -next so let's drop it from mainline as soon as we can in order to minimise surprises. Signed-off-by: Mark Brown diff --git a/include/sound/soc.h b/include/sound/soc.h index f1de3e0..3a4bd3a 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -248,8 +248,7 @@ typedef int (*hw_write_t)(void *,const char* ,int); extern struct snd_ac97_bus_ops soc_ac97_ops; enum snd_soc_control_type { - SND_SOC_CUSTOM = 1, - SND_SOC_I2C, + SND_SOC_I2C = 1, SND_SOC_SPI, }; diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c index c005ceb..039b953 100644 --- a/sound/soc/soc-cache.c +++ b/sound/soc/soc-cache.c @@ -409,9 +409,6 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec, codec->bulk_write_raw = snd_soc_hw_bulk_write_raw; switch (control) { - case SND_SOC_CUSTOM: - break; - case SND_SOC_I2C: #if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) codec->hw_write = (hw_write_t)i2c_master_send; -- cgit v0.10.2 From de1b794130b130e77ffa975bb58cb843744f9ae5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 Jun 2011 15:38:22 -0400 Subject: jbd2: Fix oops in jbd2_journal_remove_journal_head() jbd2_journal_remove_journal_head() can oops when trying to access journal_head returned by bh2jh(). This is caused for example by the following race: TASK1 TASK2 jbd2_journal_commit_transaction() ... processing t_forget list __jbd2_journal_refile_buffer(jh); if (!jh->b_transaction) { jbd_unlock_bh_state(bh); jbd2_journal_try_to_free_buffers() jbd2_journal_grab_journal_head(bh) jbd_lock_bh_state(bh) __journal_try_to_free_buffer() jbd2_journal_put_journal_head(jh) jbd2_journal_remove_journal_head(bh); jbd2_journal_put_journal_head() in TASK2 sees that b_jcount == 0 and buffer is not part of any transaction and thus frees journal_head before TASK1 gets to doing so. Note that even buffer_head can be released by try_to_free_buffers() after jbd2_journal_put_journal_head() which adds even larger opportunity for oops (but I didn't see this happen in reality). Fix the problem by making transactions hold their own journal_head reference (in b_jcount). That way we don't have to remove journal_head explicitely via jbd2_journal_remove_journal_head() and instead just remove journal_head when b_jcount drops to zero. The result of this is that [__]jbd2_journal_refile_buffer(), [__]jbd2_journal_unfile_buffer(), and __jdb2_journal_remove_checkpoint() can free journal_head which needs modification of a few callers. Also we have to be careful because once journal_head is removed, buffer_head might be freed as well. So we have to get our own buffer_head reference where it matters. Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 6a79fd0..2c62c5a 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -97,10 +97,14 @@ static int __try_to_free_cp_buf(struct journal_head *jh) if (jh->b_jlist == BJ_None && !buffer_locked(bh) && !buffer_dirty(bh) && !buffer_write_io_error(bh)) { + /* + * Get our reference so that bh cannot be freed before + * we unlock it + */ + get_bh(bh); JBUFFER_TRACE(jh, "remove from checkpoint list"); ret = __jbd2_journal_remove_checkpoint(jh) + 1; jbd_unlock_bh_state(bh); - jbd2_journal_remove_journal_head(bh); BUFFER_TRACE(bh, "release"); __brelse(bh); } else { @@ -223,8 +227,8 @@ restart: spin_lock(&journal->j_list_lock); goto restart; } + get_bh(bh); if (buffer_locked(bh)) { - atomic_inc(&bh->b_count); spin_unlock(&journal->j_list_lock); jbd_unlock_bh_state(bh); wait_on_buffer(bh); @@ -243,7 +247,6 @@ restart: */ released = __jbd2_journal_remove_checkpoint(jh); jbd_unlock_bh_state(bh); - jbd2_journal_remove_journal_head(bh); __brelse(bh); } @@ -284,7 +287,7 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, int ret = 0; if (buffer_locked(bh)) { - atomic_inc(&bh->b_count); + get_bh(bh); spin_unlock(&journal->j_list_lock); jbd_unlock_bh_state(bh); wait_on_buffer(bh); @@ -316,12 +319,12 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, ret = 1; if (unlikely(buffer_write_io_error(bh))) ret = -EIO; + get_bh(bh); J_ASSERT_JH(jh, !buffer_jbddirty(bh)); BUFFER_TRACE(bh, "remove from checkpoint"); __jbd2_journal_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); jbd_unlock_bh_state(bh); - jbd2_journal_remove_journal_head(bh); __brelse(bh); } else { /* @@ -554,7 +557,8 @@ int jbd2_cleanup_journal_tail(journal_t *journal) /* * journal_clean_one_cp_list * - * Find all the written-back checkpoint buffers in the given list and release them. + * Find all the written-back checkpoint buffers in the given list and + * release them. * * Called with the journal locked. * Called with j_list_lock held. @@ -663,8 +667,8 @@ out: * checkpoint lists. * * The function returns 1 if it frees the transaction, 0 otherwise. + * The function can free jh and bh. * - * This function is called with the journal locked. * This function is called with j_list_lock held. * This function is called with jbd_lock_bh_state(jh2bh(jh)) */ @@ -684,13 +688,14 @@ int __jbd2_journal_remove_checkpoint(struct journal_head *jh) } journal = transaction->t_journal; + JBUFFER_TRACE(jh, "removing from transaction"); __buffer_unlink(jh); jh->b_cp_transaction = NULL; + jbd2_journal_put_journal_head(jh); if (transaction->t_checkpoint_list != NULL || transaction->t_checkpoint_io_list != NULL) goto out; - JBUFFER_TRACE(jh, "transaction has no more buffers"); /* * There is one special case to worry about: if we have just pulled the @@ -701,10 +706,8 @@ int __jbd2_journal_remove_checkpoint(struct journal_head *jh) * The locking here around t_state is a bit sleazy. * See the comment at the end of jbd2_journal_commit_transaction(). */ - if (transaction->t_state != T_FINISHED) { - JBUFFER_TRACE(jh, "belongs to running/committing transaction"); + if (transaction->t_state != T_FINISHED) goto out; - } /* OK, that was the last buffer for the transaction: we can now safely remove this transaction from the log */ @@ -723,7 +726,6 @@ int __jbd2_journal_remove_checkpoint(struct journal_head *jh) wake_up(&journal->j_wait_logspace); ret = 1; out: - JBUFFER_TRACE(jh, "exit"); return ret; } @@ -742,6 +744,8 @@ void __jbd2_journal_insert_checkpoint(struct journal_head *jh, J_ASSERT_JH(jh, buffer_dirty(jh2bh(jh)) || buffer_jbddirty(jh2bh(jh))); J_ASSERT_JH(jh, jh->b_cp_transaction == NULL); + /* Get reference for checkpointing transaction */ + jbd2_journal_grab_journal_head(jh2bh(jh)); jh->b_cp_transaction = transaction; if (!transaction->t_checkpoint_list) { diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 7f21cf3..eef6979 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -848,10 +848,16 @@ restart_loop: while (commit_transaction->t_forget) { transaction_t *cp_transaction; struct buffer_head *bh; + int try_to_free = 0; jh = commit_transaction->t_forget; spin_unlock(&journal->j_list_lock); bh = jh2bh(jh); + /* + * Get a reference so that bh cannot be freed before we are + * done with it. + */ + get_bh(bh); jbd_lock_bh_state(bh); J_ASSERT_JH(jh, jh->b_transaction == commit_transaction); @@ -914,28 +920,27 @@ restart_loop: __jbd2_journal_insert_checkpoint(jh, commit_transaction); if (is_journal_aborted(journal)) clear_buffer_jbddirty(bh); - JBUFFER_TRACE(jh, "refile for checkpoint writeback"); - __jbd2_journal_refile_buffer(jh); - jbd_unlock_bh_state(bh); } else { J_ASSERT_BH(bh, !buffer_dirty(bh)); - /* The buffer on BJ_Forget list and not jbddirty means + /* + * The buffer on BJ_Forget list and not jbddirty means * it has been freed by this transaction and hence it * could not have been reallocated until this * transaction has committed. *BUT* it could be * reallocated once we have written all the data to * disk and before we process the buffer on BJ_Forget - * list. */ - JBUFFER_TRACE(jh, "refile or unfile freed buffer"); - __jbd2_journal_refile_buffer(jh); - if (!jh->b_transaction) { - jbd_unlock_bh_state(bh); - /* needs a brelse */ - jbd2_journal_remove_journal_head(bh); - release_buffer_page(bh); - } else - jbd_unlock_bh_state(bh); + * list. + */ + if (!jh->b_next_transaction) + try_to_free = 1; } + JBUFFER_TRACE(jh, "refile or unfile buffer"); + __jbd2_journal_refile_buffer(jh); + jbd_unlock_bh_state(bh); + if (try_to_free) + release_buffer_page(bh); /* Drops bh reference */ + else + __brelse(bh); cond_resched_lock(&journal->j_list_lock); } spin_unlock(&journal->j_list_lock); diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 9a78269..0dfa5b59 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -2078,10 +2078,9 @@ static void journal_free_journal_head(struct journal_head *jh) * When a buffer has its BH_JBD bit set it is immune from being released by * core kernel code, mainly via ->b_count. * - * A journal_head may be detached from its buffer_head when the journal_head's - * b_transaction, b_cp_transaction and b_next_transaction pointers are NULL. - * Various places in JBD call jbd2_journal_remove_journal_head() to indicate that the - * journal_head can be dropped if needed. + * A journal_head is detached from its buffer_head when the journal_head's + * b_jcount reaches zero. Running transaction (b_transaction) and checkpoint + * transaction (b_cp_transaction) hold their references to b_jcount. * * Various places in the kernel want to attach a journal_head to a buffer_head * _before_ attaching the journal_head to a transaction. To protect the @@ -2094,17 +2093,16 @@ static void journal_free_journal_head(struct journal_head *jh) * (Attach a journal_head if needed. Increments b_jcount) * struct journal_head *jh = jbd2_journal_add_journal_head(bh); * ... + * (Get another reference for transaction) + * jbd2_journal_grab_journal_head(bh); * jh->b_transaction = xxx; + * (Put original reference) * jbd2_journal_put_journal_head(jh); - * - * Now, the journal_head's b_jcount is zero, but it is safe from being released - * because it has a non-zero b_transaction. */ /* * Give a buffer_head a journal_head. * - * Doesn't need the journal lock. * May sleep. */ struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh) @@ -2168,61 +2166,29 @@ static void __journal_remove_journal_head(struct buffer_head *bh) struct journal_head *jh = bh2jh(bh); J_ASSERT_JH(jh, jh->b_jcount >= 0); - - get_bh(bh); - if (jh->b_jcount == 0) { - if (jh->b_transaction == NULL && - jh->b_next_transaction == NULL && - jh->b_cp_transaction == NULL) { - J_ASSERT_JH(jh, jh->b_jlist == BJ_None); - J_ASSERT_BH(bh, buffer_jbd(bh)); - J_ASSERT_BH(bh, jh2bh(jh) == bh); - BUFFER_TRACE(bh, "remove journal_head"); - if (jh->b_frozen_data) { - printk(KERN_WARNING "%s: freeing " - "b_frozen_data\n", - __func__); - jbd2_free(jh->b_frozen_data, bh->b_size); - } - if (jh->b_committed_data) { - printk(KERN_WARNING "%s: freeing " - "b_committed_data\n", - __func__); - jbd2_free(jh->b_committed_data, bh->b_size); - } - bh->b_private = NULL; - jh->b_bh = NULL; /* debug, really */ - clear_buffer_jbd(bh); - __brelse(bh); - journal_free_journal_head(jh); - } else { - BUFFER_TRACE(bh, "journal_head was locked"); - } + J_ASSERT_JH(jh, jh->b_transaction == NULL); + J_ASSERT_JH(jh, jh->b_next_transaction == NULL); + J_ASSERT_JH(jh, jh->b_cp_transaction == NULL); + J_ASSERT_JH(jh, jh->b_jlist == BJ_None); + J_ASSERT_BH(bh, buffer_jbd(bh)); + J_ASSERT_BH(bh, jh2bh(jh) == bh); + BUFFER_TRACE(bh, "remove journal_head"); + if (jh->b_frozen_data) { + printk(KERN_WARNING "%s: freeing b_frozen_data\n", __func__); + jbd2_free(jh->b_frozen_data, bh->b_size); } + if (jh->b_committed_data) { + printk(KERN_WARNING "%s: freeing b_committed_data\n", __func__); + jbd2_free(jh->b_committed_data, bh->b_size); + } + bh->b_private = NULL; + jh->b_bh = NULL; /* debug, really */ + clear_buffer_jbd(bh); + journal_free_journal_head(jh); } /* - * jbd2_journal_remove_journal_head(): if the buffer isn't attached to a transaction - * and has a zero b_jcount then remove and release its journal_head. If we did - * see that the buffer is not used by any transaction we also "logically" - * decrement ->b_count. - * - * We in fact take an additional increment on ->b_count as a convenience, - * because the caller usually wants to do additional things with the bh - * after calling here. - * The caller of jbd2_journal_remove_journal_head() *must* run __brelse(bh) at some - * time. Once the caller has run __brelse(), the buffer is eligible for - * reaping by try_to_free_buffers(). - */ -void jbd2_journal_remove_journal_head(struct buffer_head *bh) -{ - jbd_lock_bh_journal_head(bh); - __journal_remove_journal_head(bh); - jbd_unlock_bh_journal_head(bh); -} - -/* - * Drop a reference on the passed journal_head. If it fell to zero then try to + * Drop a reference on the passed journal_head. If it fell to zero then * release the journal_head from the buffer_head. */ void jbd2_journal_put_journal_head(struct journal_head *jh) @@ -2232,11 +2198,12 @@ void jbd2_journal_put_journal_head(struct journal_head *jh) jbd_lock_bh_journal_head(bh); J_ASSERT_JH(jh, jh->b_jcount > 0); --jh->b_jcount; - if (!jh->b_jcount && !jh->b_transaction) { + if (!jh->b_jcount) { __journal_remove_journal_head(bh); + jbd_unlock_bh_journal_head(bh); __brelse(bh); - } - jbd_unlock_bh_journal_head(bh); + } else + jbd_unlock_bh_journal_head(bh); } /* diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 547b101..2d71094 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -30,6 +30,7 @@ #include static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh); +static void __jbd2_journal_unfile_buffer(struct journal_head *jh); /* * jbd2_get_transaction: obtain a new transaction_t object. @@ -764,7 +765,6 @@ repeat: if (!jh->b_transaction) { JBUFFER_TRACE(jh, "no transaction"); J_ASSERT_JH(jh, !jh->b_next_transaction); - jh->b_transaction = transaction; JBUFFER_TRACE(jh, "file as BJ_Reserved"); spin_lock(&journal->j_list_lock); __jbd2_journal_file_buffer(jh, transaction, BJ_Reserved); @@ -895,8 +895,6 @@ int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh) * committed and so it's safe to clear the dirty bit. */ clear_buffer_dirty(jh2bh(jh)); - jh->b_transaction = transaction; - /* first access by this transaction */ jh->b_modified = 0; @@ -1230,8 +1228,6 @@ int jbd2_journal_forget (handle_t *handle, struct buffer_head *bh) __jbd2_journal_file_buffer(jh, transaction, BJ_Forget); } else { __jbd2_journal_unfile_buffer(jh); - jbd2_journal_remove_journal_head(bh); - __brelse(bh); if (!buffer_jbd(bh)) { spin_unlock(&journal->j_list_lock); jbd_unlock_bh_state(bh); @@ -1554,19 +1550,32 @@ void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh) mark_buffer_dirty(bh); /* Expose it to the VM */ } -void __jbd2_journal_unfile_buffer(struct journal_head *jh) +/* + * Remove buffer from all transactions. + * + * Called with bh_state lock and j_list_lock + * + * jh and bh may be already freed when this function returns. + */ +static void __jbd2_journal_unfile_buffer(struct journal_head *jh) { __jbd2_journal_temp_unlink_buffer(jh); jh->b_transaction = NULL; + jbd2_journal_put_journal_head(jh); } void jbd2_journal_unfile_buffer(journal_t *journal, struct journal_head *jh) { - jbd_lock_bh_state(jh2bh(jh)); + struct buffer_head *bh = jh2bh(jh); + + /* Get reference so that buffer cannot be freed before we unlock it */ + get_bh(bh); + jbd_lock_bh_state(bh); spin_lock(&journal->j_list_lock); __jbd2_journal_unfile_buffer(jh); spin_unlock(&journal->j_list_lock); - jbd_unlock_bh_state(jh2bh(jh)); + jbd_unlock_bh_state(bh); + __brelse(bh); } /* @@ -1593,8 +1602,6 @@ __journal_try_to_free_buffer(journal_t *journal, struct buffer_head *bh) if (jh->b_jlist == BJ_None) { JBUFFER_TRACE(jh, "remove from checkpoint list"); __jbd2_journal_remove_checkpoint(jh); - jbd2_journal_remove_journal_head(bh); - __brelse(bh); } } spin_unlock(&journal->j_list_lock); @@ -1657,7 +1664,6 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal, /* * We take our own ref against the journal_head here to avoid * having to add tons of locking around each instance of - * jbd2_journal_remove_journal_head() and * jbd2_journal_put_journal_head(). */ jh = jbd2_journal_grab_journal_head(bh); @@ -1695,10 +1701,9 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction) int may_free = 1; struct buffer_head *bh = jh2bh(jh); - __jbd2_journal_unfile_buffer(jh); - if (jh->b_cp_transaction) { JBUFFER_TRACE(jh, "on running+cp transaction"); + __jbd2_journal_temp_unlink_buffer(jh); /* * We don't want to write the buffer anymore, clear the * bit so that we don't confuse checks in @@ -1709,8 +1714,7 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction) may_free = 0; } else { JBUFFER_TRACE(jh, "on running transaction"); - jbd2_journal_remove_journal_head(bh); - __brelse(bh); + __jbd2_journal_unfile_buffer(jh); } return may_free; } @@ -1988,6 +1992,8 @@ void __jbd2_journal_file_buffer(struct journal_head *jh, if (jh->b_transaction) __jbd2_journal_temp_unlink_buffer(jh); + else + jbd2_journal_grab_journal_head(bh); jh->b_transaction = transaction; switch (jlist) { @@ -2039,9 +2045,10 @@ void jbd2_journal_file_buffer(struct journal_head *jh, * already started to be used by a subsequent transaction, refile the * buffer on that transaction's metadata list. * - * Called under journal->j_list_lock - * + * Called under j_list_lock * Called under jbd_lock_bh_state(jh2bh(jh)) + * + * jh and bh may be already free when this function returns */ void __jbd2_journal_refile_buffer(struct journal_head *jh) { @@ -2065,6 +2072,11 @@ void __jbd2_journal_refile_buffer(struct journal_head *jh) was_dirty = test_clear_buffer_jbddirty(bh); __jbd2_journal_temp_unlink_buffer(jh); + /* + * We set b_transaction here because b_next_transaction will inherit + * our jh reference and thus __jbd2_journal_file_buffer() must not + * take a new one. + */ jh->b_transaction = jh->b_next_transaction; jh->b_next_transaction = NULL; if (buffer_freed(bh)) @@ -2081,30 +2093,21 @@ void __jbd2_journal_refile_buffer(struct journal_head *jh) } /* - * For the unlocked version of this call, also make sure that any - * hanging journal_head is cleaned up if necessary. - * - * __jbd2_journal_refile_buffer is usually called as part of a single locked - * operation on a buffer_head, in which the caller is probably going to - * be hooking the journal_head onto other lists. In that case it is up - * to the caller to remove the journal_head if necessary. For the - * unlocked jbd2_journal_refile_buffer call, the caller isn't going to be - * doing anything else to the buffer so we need to do the cleanup - * ourselves to avoid a jh leak. - * - * *** The journal_head may be freed by this call! *** + * __jbd2_journal_refile_buffer() with necessary locking added. We take our + * bh reference so that we can safely unlock bh. + * + * The jh and bh may be freed by this call. */ void jbd2_journal_refile_buffer(journal_t *journal, struct journal_head *jh) { struct buffer_head *bh = jh2bh(jh); + /* Get reference so that buffer cannot be freed before we unlock it */ + get_bh(bh); jbd_lock_bh_state(bh); spin_lock(&journal->j_list_lock); - __jbd2_journal_refile_buffer(jh); jbd_unlock_bh_state(bh); - jbd2_journal_remove_journal_head(bh); - spin_unlock(&journal->j_list_lock); __brelse(bh); } diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 4ecb7b1..d087c2e 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1024,7 +1024,6 @@ struct journal_s /* Filing buffers */ extern void jbd2_journal_unfile_buffer(journal_t *, struct journal_head *); -extern void __jbd2_journal_unfile_buffer(struct journal_head *); extern void __jbd2_journal_refile_buffer(struct journal_head *); extern void jbd2_journal_refile_buffer(journal_t *, struct journal_head *); extern void __jbd2_journal_file_buffer(struct journal_head *, transaction_t *, int); @@ -1165,7 +1164,6 @@ extern void jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_in */ struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh); struct journal_head *jbd2_journal_grab_journal_head(struct buffer_head *bh); -void jbd2_journal_remove_journal_head(struct buffer_head *bh); void jbd2_journal_put_journal_head(struct journal_head *jh); /* -- cgit v0.10.2 From b9cabe52c27cf834137f3aaa46da23bcf32284e8 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 12 Jun 2011 04:28:16 +0000 Subject: ieee802154: Don't leak memory in ieee802154_nl_fill_phy In net/ieee802154/nl-phy.c::ieee802154_nl_fill_phy() I see two small issues. 1) If the allocation of 'buf' fails we may just as well return -EMSGSIZE directly rather than jumping to 'out:' and do a pointless kfree(0). 2) We do not free 'buf' unless we jump to one of the error labels and this leaks memory. This patch should address both. Signed-off-by: Jesper Juhl Acked-by: Dmitry Eremin-Solenikov Signed-off-by: David S. Miller diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c index ed0eab3..02548b2 100644 --- a/net/ieee802154/nl-phy.c +++ b/net/ieee802154/nl-phy.c @@ -44,7 +44,7 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 pid, pr_debug("%s\n", __func__); if (!buf) - goto out; + return -EMSGSIZE; hdr = genlmsg_put(msg, 0, seq, &nl802154_family, flags, IEEE802154_LIST_PHY); @@ -65,6 +65,7 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 pid, pages * sizeof(uint32_t), buf); mutex_unlock(&phy->pib_lock); + kfree(buf); return genlmsg_end(msg, hdr); nla_put_failure: -- cgit v0.10.2 From 1ffde03d2aa112750468cff07efc9e0a504517dd Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Sun, 12 Jun 2011 09:40:49 +0000 Subject: 3c503: fix broken IRQ autoprobing Fix broken IRQ autoprobing in 3c503 driver: - improper IRQ freeing (does not free IRQs causes WARN) - missing break when an working IRQ is found The driver works with this patch. Signed-off-by: Ondrej Zary Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c index d84f6e8..5b73298 100644 --- a/drivers/net/3c503.c +++ b/drivers/net/3c503.c @@ -412,7 +412,7 @@ el2_open(struct net_device *dev) outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); outb_p(0x00, E33G_IDCFR); msleep(1); - free_irq(*irqp, el2_probe_interrupt); + free_irq(*irqp, &seen); if (!seen) continue; @@ -422,6 +422,7 @@ el2_open(struct net_device *dev) continue; if (retval < 0) goto err_disable; + break; } while (*++irqp); if (*irqp == 0) { -- cgit v0.10.2 From 9281b2a2e2e02ad4bcc2fdd11797709b815d5f8e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 13 Jun 2011 08:17:36 +0000 Subject: net/hplance: hplance_init() should be __devinit WARNING: vmlinux.o(.devinit.text+0x253e): Section mismatch in reference from the function hplance_init_one() to the function .init.text:hplance_init() The forward declaration had the correct attribute, but the actual function definition hadn't. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller diff --git a/drivers/net/hplance.c b/drivers/net/hplance.c index b6060f7..a900d5b 100644 --- a/drivers/net/hplance.c +++ b/drivers/net/hplance.c @@ -135,7 +135,7 @@ static void __devexit hplance_remove_one(struct dio_dev *d) } /* Initialise a single lance board at the given DIO device */ -static void __init hplance_init(struct net_device *dev, struct dio_dev *d) +static void __devinit hplance_init(struct net_device *dev, struct dio_dev *d) { unsigned long va = (d->resource.start + DIO_VIRADDRBASE); struct hplance_private *lp; -- cgit v0.10.2 From 773e9b442693b250aa6c452cb0cf5a9343f51cef Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 7 Jun 2011 20:57:14 -0700 Subject: ceph: fix page alignment corrections dd if=/dev/urandom of=/mnt/fs_depot/dd10 bs=500 seek=8388 count=1 dd if=/mnt/fs_depot/dd10 of=/root/dd10out bs=500 skip=8388 count=1 Reported-by: Henry C Chang Signed-off-by: Sage Weil diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 9542f07..2be0f35 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -290,7 +290,6 @@ static int striped_read(struct inode *inode, struct ceph_inode_info *ci = ceph_inode(inode); u64 pos, this_len; int io_align, page_align; - int page_off = off & ~PAGE_CACHE_MASK; /* first byte's offset in page */ int left, pages_left; int read; struct page **page_pos; @@ -326,12 +325,11 @@ more: ret, hit_stripe ? " HITSTRIPE" : "", was_short ? " SHORT" : ""); if (ret > 0) { - int didpages = - ((pos & ~PAGE_CACHE_MASK) + ret) >> PAGE_CACHE_SHIFT; + int didpages = (page_align + ret) >> PAGE_CACHE_SHIFT; if (read < pos - off) { dout(" zero gap %llu to %llu\n", off + read, pos); - ceph_zero_page_vector_range(page_off + read, + ceph_zero_page_vector_range(page_align + read, pos - off - read, pages); } pos += ret; @@ -356,7 +354,7 @@ more: left = inode->i_size - pos; dout("zero tail %d\n", left); - ceph_zero_page_vector_range(page_off + read, left, + ceph_zero_page_vector_range(page_align + read, left, pages); read += left; } -- cgit v0.10.2 From 9bb0ce2b0b734f3325ea5cd6b351856eeac94f78 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Mon, 13 Jun 2011 16:20:18 -0700 Subject: libceph: fix page calculation for non-page-aligned io Set the page count correctly for non-page-aligned IO. We were already doing this correctly for alignment, but not the page count. Fixes DIRECT_IO writes from unaligned pages. Signed-off-by: Sage Weil diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 9cb627a..7330c27 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -477,8 +477,9 @@ struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc, calc_layout(osdc, vino, layout, off, plen, req, ops); req->r_file_layout = *layout; /* keep a copy */ - /* in case it differs from natural alignment that calc_layout - filled in for us */ + /* in case it differs from natural (file) alignment that + calc_layout filled in for us */ + req->r_num_pages = calc_pages_for(page_align, *plen); req->r_page_alignment = page_align; ceph_osdc_build_request(req, off, plen, ops, @@ -2027,8 +2028,9 @@ static struct ceph_msg *get_reply(struct ceph_connection *con, int want = calc_pages_for(req->r_page_alignment, data_len); if (unlikely(req->r_num_pages < want)) { - pr_warning("tid %lld reply %d > expected %d pages\n", - tid, want, m->nr_pages); + pr_warning("tid %lld reply has %d bytes %d pages, we" + " had only %d pages ready\n", tid, data_len, + want, req->r_num_pages); *skip = 1; ceph_msg_put(m); m = NULL; -- cgit v0.10.2 From d7f124f129a6aea99938e0d4172c741b56fefeda Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Mon, 13 Jun 2011 16:22:18 -0700 Subject: ceph: fix sync and dio writes across stripe boundaries We were iterating across stripe boundaries properly, but not moving the write buffer pointer forward. This caused us to rewrite the same data after the break. Fix by adjusting the data pointer forward, and recalculating the io and buffer alignment after the break. Signed-off-by: Sage Weil diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 2be0f35..4698a5c 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -476,9 +476,6 @@ static ssize_t ceph_sync_write(struct file *file, const char __user *data, else pos = *offset; - io_align = pos & ~PAGE_MASK; - buf_align = (unsigned long)data & ~PAGE_MASK; - ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + left); if (ret < 0) return ret; @@ -502,6 +499,8 @@ static ssize_t ceph_sync_write(struct file *file, const char __user *data, * boundary. this isn't atomic, unfortunately. :( */ more: + io_align = pos & ~PAGE_MASK; + buf_align = (unsigned long)data & ~PAGE_MASK; len = left; if (file->f_flags & O_DIRECT) { /* write from beginning of first page, regardless of @@ -591,6 +590,7 @@ out: pos += len; written += len; left -= len; + data += written; if (left) goto more; -- cgit v0.10.2 From 37f7ec38ea5c31180461f82e895e13fdd549b595 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 13 Jun 2011 23:52:02 +0200 Subject: ALSA: 6fire: Fix double-free bug in usb6fire_fw_ezusb_upload() We have a double-free bug in sound/usb/6fire/firmware.c::usb6fire_fw_ezusb_upload(). We already call release_firmware(fw) on line 258, so when we then do it again after usb6fire_fw_ezusb_write() returns <0, we have a double-free. Easily fixed by just removing the last call to release_firmware(). Signed-off-by: Jesper Juhl Signed-off-by: Takashi Iwai diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index a91719d..1e3ae33 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -270,7 +270,6 @@ static int usb6fire_fw_ezusb_upload( data = 0x00; /* resume ezusb cpu */ ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); if (ret < 0) { - release_firmware(fw); snd_printk(KERN_ERR PREFIX "unable to upload ezusb " "firmware %s: end message.\n", fwname); return ret; -- cgit v0.10.2 From ca2585afa013ec2cf99a48e46d6b82df2e240493 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 14 Jun 2011 08:14:32 +0200 Subject: ALSA: hda - Fix missing static inline to beep dummy function The commit 2308f4add3de9f6c9c9f02e49461e94d84bb200a missed static inline thus it resulted in multiple-definitions error at linking. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h index 4967eab..55f0647 100644 --- a/sound/pci/hda/hda_beep.h +++ b/sound/pci/hda/hda_beep.h @@ -54,7 +54,7 @@ static inline int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) { return 0; } -void snd_hda_detach_beep_device(struct hda_codec *codec) +static inline void snd_hda_detach_beep_device(struct hda_codec *codec) { } #endif -- cgit v0.10.2 From 1123d93963cbd2546449d4d9f0c568e323cb0ac6 Mon Sep 17 00:00:00 2001 From: Max Asbock Date: Mon, 13 Jun 2011 10:18:32 -0700 Subject: timerfd: Fix wakeup of processes when timer is cancelled on clock change Currently processes waiting with poll on cancelable timerfd timers are not woken up when the timers are canceled. When the system time is set the clock_was_set() function calls timerfd_clock_was_set() to cancel and wake up processes waiting on potential cancelable timerfd timers. However the wake up currently has no effect because in the case of timerfd_read it is dependent on ctx->ticks not being 0. timerfd_poll also requires ctx->ticks being non zero. As a consequence processes waiting on cancelable timers only get woken up when the timers expire. This patch fixes this by incrementing ctx->ticks before calling wake_up. Signed-off-by: Max Asbock Cc: kay.sievers@vrfy.org Cc: virtuoso@slind.org Cc: johnstul Link: http://lkml.kernel.org/r/1307985512.4710.41.camel@w-amax.beaverton.ibm.com Signed-off-by: Thomas Gleixner diff --git a/fs/timerfd.c b/fs/timerfd.c index f67acbd..dffeb37 100644 --- a/fs/timerfd.c +++ b/fs/timerfd.c @@ -61,7 +61,9 @@ static enum hrtimer_restart timerfd_tmrproc(struct hrtimer *htmr) /* * Called when the clock was set to cancel the timers in the cancel - * list. + * list. This will wake up processes waiting on these timers. The + * wake-up requires ctx->ticks to be non zero, therefore we increment + * it before calling wake_up_locked(). */ void timerfd_clock_was_set(void) { @@ -76,6 +78,7 @@ void timerfd_clock_was_set(void) spin_lock_irqsave(&ctx->wqh.lock, flags); if (ctx->moffs.tv64 != moffs.tv64) { ctx->moffs.tv64 = KTIME_MAX; + ctx->ticks++; wake_up_locked(&ctx->wqh); } spin_unlock_irqrestore(&ctx->wqh.lock, flags); -- cgit v0.10.2 From e9e35c5a2b2c803b5e2f25906d8ffe110670ceb6 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Jun 2011 05:53:18 -0700 Subject: OMAP1: PM: register notifiers with generic clock ops even when !PM_RUNTIME When runtime PM is disabled, device clocks need to be enabled on device add and disabled on device remove. This currently is not happening because in the !PM_RUNTIME case, no notifiers are registered for OMAP1 devices. Fix this by ensuring notifiers are registered, even in the !PM_RUNTIME case. Reported-by: Janusz Krzysztofik Tested-by: Janusz Krzysztofik Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index af98117..5b114d1 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,14 +4,14 @@ # Common support obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o -obj-y += clock.o clock_data.o opp_data.o reset.o +obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o +obj-$(CONFIG_PM) += pm.o sleep.o # DSP obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index fe31d93..334fb88 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = { USE_PLATFORM_PM_SLEEP_OPS }, }; +#define OMAP1_PWR_DOMAIN (&default_power_domain) +#else +#define OMAP1_PWR_DOMAIN NULL +#endif /* CONFIG_PM_RUNTIME */ static struct pm_clk_notifier_block platform_bus_notifier = { - .pwr_domain = &default_power_domain, + .pwr_domain = OMAP1_PWR_DOMAIN, .con_ids = { "ick", "fck", NULL, }, }; @@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void) return 0; } core_initcall(omap1_pm_runtime_init); -#endif /* CONFIG_PM_RUNTIME */ + -- cgit v0.10.2 From c46a131c0c0f4c2457e6b1e430c578a5cb057334 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 5 Jun 2011 11:12:31 +0000 Subject: xfs: fix ->mknod() return value on xfs_get_acl() failure ->mknod() should return negative on errors and PTR_ERR() gives already negative value... Signed-off-by: Al Viro Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index dd21784..d44d92c 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -182,7 +182,7 @@ xfs_vn_mknod( if (IS_POSIXACL(dir)) { default_acl = xfs_get_acl(dir, ACL_TYPE_DEFAULT); if (IS_ERR(default_acl)) - return -PTR_ERR(default_acl); + return PTR_ERR(default_acl); if (!default_acl) mode &= ~current_umask(); -- cgit v0.10.2 From df3c3931ec58cca3409c71b18ad6da0cd71fe163 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 14 Jun 2011 12:48:19 +0300 Subject: Bluetooth: Fix accepting connect requests for defer_setup When authentication completes we shouldn't blindly accept any pending L2CAP connect requests. If the socket has the defer_setup feature enabled it should still wait for user space acceptance of the connect request. The issue only happens for non-SSP connections since with SSP the L2CAP Connect request may not be sent for non-SDP PSMs before authentication has completed successfully. Signed-off-by: Johan Hedberg Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index e64a1c2..56fdd91 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4002,21 +4002,30 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) } } else if (sk->sk_state == BT_CONNECT2) { struct l2cap_conn_rsp rsp; - __u16 result; + __u16 res, stat; if (!status) { - sk->sk_state = BT_CONFIG; - result = L2CAP_CR_SUCCESS; + if (bt_sk(sk)->defer_setup) { + struct sock *parent = bt_sk(sk)->parent; + res = L2CAP_CR_PEND; + stat = L2CAP_CS_AUTHOR_PEND; + parent->sk_data_ready(parent, 0); + } else { + sk->sk_state = BT_CONFIG; + res = L2CAP_CR_SUCCESS; + stat = L2CAP_CS_NO_INFO; + } } else { sk->sk_state = BT_DISCONN; l2cap_sock_set_timer(sk, HZ / 10); - result = L2CAP_CR_SEC_BLOCK; + res = L2CAP_CR_SEC_BLOCK; + stat = L2CAP_CS_NO_INFO; } rsp.scid = cpu_to_le16(chan->dcid); rsp.dcid = cpu_to_le16(chan->scid); - rsp.result = cpu_to_le16(result); - rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO); + rsp.result = cpu_to_le16(res); + rsp.status = cpu_to_le16(stat); l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP, sizeof(rsp), &rsp); } -- cgit v0.10.2 From 357f45db920393aac983a137bd74095f612d5a01 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 13 Jun 2011 22:50:41 +0200 Subject: USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big. If the size of the firmware exceeds TI_FIRMWARE_BUF_SIZE we'll leak 'fw_p' by failing to call release_firmware(). This patch fixes the leak. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c6d92a5..ea84456 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1745,6 +1745,7 @@ static int ti_download_firmware(struct ti_device *tdev) } if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size); + release_firmware(fw_p); return -ENOENT; } -- cgit v0.10.2 From 9a432736904d386cda28b987b38ba14dae960ecc Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 30 May 2011 20:38:55 -0700 Subject: rcu: Simplify curing of load woes Make the functions creating the kthreads wake them up. Leverage the fact that the per-node and boost kthreads can run anywhere, thus dispensing with the need to wake them up once the incoming CPU has gone fully online. Signed-off-by: Paul E. McKenney Tested-by: Daniel J Blueman diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 89419ff..0a8ec5b 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1635,6 +1635,20 @@ static int rcu_cpu_kthread(void *arg) * to manipulate rcu_cpu_kthread_task. There might be another CPU * attempting to access it during boot, but the locking in kthread_bind() * will enforce sufficient ordering. + * + * Please note that we cannot simply refuse to wake up the per-CPU + * kthread because kthreads are created in TASK_UNINTERRUPTIBLE state, + * which can result in softlockup complaints if the task ends up being + * idle for more than a couple of minutes. + * + * However, please note also that we cannot bind the per-CPU kthread to its + * CPU until that CPU is fully online. We also cannot wait until the + * CPU is fully online before we create its per-CPU kthread, as this would + * deadlock the system when CPU notifiers tried waiting for grace + * periods. So we bind the per-CPU kthread to its CPU only if the CPU + * is online. If its CPU is not yet fully online, then the code in + * rcu_cpu_kthread() will wait until it is fully online, and then do + * the binding. */ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu) { @@ -1647,12 +1661,14 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu) t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu); if (IS_ERR(t)) return PTR_ERR(t); - kthread_bind(t, cpu); + if (cpu_online(cpu)) + kthread_bind(t, cpu); per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu; WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL); - per_cpu(rcu_cpu_kthread_task, cpu) = t; sp.sched_priority = RCU_KTHREAD_PRIO; sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); + per_cpu(rcu_cpu_kthread_task, cpu) = t; + wake_up_process(t); /* Get to TASK_INTERRUPTIBLE quickly. */ return 0; } @@ -1759,12 +1775,11 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp, raw_spin_unlock_irqrestore(&rnp->lock, flags); sp.sched_priority = 99; sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); + wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */ } return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index); } -static void rcu_wake_one_boost_kthread(struct rcu_node *rnp); - /* * Spawn all kthreads -- called as soon as the scheduler is running. */ @@ -1772,30 +1787,18 @@ static int __init rcu_spawn_kthreads(void) { int cpu; struct rcu_node *rnp; - struct task_struct *t; rcu_kthreads_spawnable = 1; for_each_possible_cpu(cpu) { per_cpu(rcu_cpu_has_work, cpu) = 0; - if (cpu_online(cpu)) { + if (cpu_online(cpu)) (void)rcu_spawn_one_cpu_kthread(cpu); - t = per_cpu(rcu_cpu_kthread_task, cpu); - if (t) - wake_up_process(t); - } } rnp = rcu_get_root(rcu_state); (void)rcu_spawn_one_node_kthread(rcu_state, rnp); - if (rnp->node_kthread_task) - wake_up_process(rnp->node_kthread_task); if (NUM_RCU_NODES > 1) { - rcu_for_each_leaf_node(rcu_state, rnp) { + rcu_for_each_leaf_node(rcu_state, rnp) (void)rcu_spawn_one_node_kthread(rcu_state, rnp); - t = rnp->node_kthread_task; - if (t) - wake_up_process(t); - rcu_wake_one_boost_kthread(rnp); - } } return 0; } @@ -2221,31 +2224,6 @@ static void __cpuinit rcu_prepare_kthreads(int cpu) } /* - * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state, - * but the RCU threads are woken on demand, and if demand is low this - * could be a while triggering the hung task watchdog. - * - * In order to avoid this, poke all tasks once the CPU is fully - * up and running. - */ -static void __cpuinit rcu_online_kthreads(int cpu) -{ - struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu); - struct rcu_node *rnp = rdp->mynode; - struct task_struct *t; - - t = per_cpu(rcu_cpu_kthread_task, cpu); - if (t) - wake_up_process(t); - - t = rnp->node_kthread_task; - if (t) - wake_up_process(t); - - rcu_wake_one_boost_kthread(rnp); -} - -/* * Handle CPU online/offline notification events. */ static int __cpuinit rcu_cpu_notify(struct notifier_block *self, @@ -2262,7 +2240,6 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self, rcu_prepare_kthreads(cpu); break; case CPU_ONLINE: - rcu_online_kthreads(cpu); case CPU_DOWN_FAILED: rcu_node_kthread_setaffinity(rnp, -1); rcu_cpu_kthread_setrt(cpu, 1); diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index c8bff30..ea2e2fb 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1299,15 +1299,10 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, raw_spin_unlock_irqrestore(&rnp->lock, flags); sp.sched_priority = RCU_KTHREAD_PRIO; sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); + wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */ return 0; } -static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp) -{ - if (rnp->boost_kthread_task) - wake_up_process(rnp->boost_kthread_task); -} - #else /* #ifdef CONFIG_RCU_BOOST */ static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) @@ -1331,10 +1326,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, return 0; } -static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp) -{ -} - #endif /* #else #ifdef CONFIG_RCU_BOOST */ #ifndef CONFIG_SMP -- cgit v0.10.2 From 09223371deac67d08ca0b70bd18787920284c967 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 14 Jun 2011 13:26:25 +0800 Subject: rcu: Use softirq to address performance regression Commit a26ac2455ffcf3(rcu: move TREE_RCU from softirq to kthread) introduced performance regression. In an AIM7 test, this commit degraded performance by about 40%. The commit runs rcu callbacks in a kthread instead of softirq. We observed high rate of context switch which is caused by this. Out test system has 64 CPUs and HZ is 1000, so we saw more than 64k context switch per second which is caused by RCU's per-CPU kthread. A trace showed that most of the time the RCU per-CPU kthread doesn't actually handle any callbacks, but instead just does a very small amount of work handling grace periods. This means that RCU's per-CPU kthreads are making the scheduler do quite a bit of work in order to allow a very small amount of RCU-related processing to be done. Alex Shi's analysis determined that this slowdown is due to lock contention within the scheduler. Unfortunately, as Peter Zijlstra points out, the scheduler's real-time semantics require global action, which means that this contention is inherent in real-time scheduling. (Yes, perhaps someone will come up with a workaround -- otherwise, -rt is not going to do well on large SMP systems -- but this patch will work around this issue in the meantime. And "the meantime" might well be forever.) This patch therefore re-introduces softirq processing to RCU, but only for core RCU work. RCU callbacks are still executed in kthread context, so that only a small amount of RCU work runs in softirq context in the common case. This should minimize ksoftirqd execution, allowing us to skip boosting of ksoftirqd for CONFIG_RCU_BOOST=y kernels. Signed-off-by: Shaohua Li Tested-by: "Alex,Shi" Signed-off-by: Paul E. McKenney diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index f481780..db3b1ab 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -843,6 +843,7 @@ Provides counts of softirq handlers serviced since boot time, for each cpu. TASKLET: 0 0 0 290 SCHED: 27035 26983 26971 26746 HRTIMER: 0 0 0 0 + RCU: 1678 1769 2178 2250 1.3 IDE devices in /proc/ide diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 6c12989..f6efed0 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -414,6 +414,7 @@ enum TASKLET_SOFTIRQ, SCHED_SOFTIRQ, HRTIMER_SOFTIRQ, + RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ NR_SOFTIRQS }; diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h index ae045ca..1c09820 100644 --- a/include/trace/events/irq.h +++ b/include/trace/events/irq.h @@ -20,7 +20,8 @@ struct softirq_action; softirq_name(BLOCK_IOPOLL), \ softirq_name(TASKLET), \ softirq_name(SCHED), \ - softirq_name(HRTIMER)) + softirq_name(HRTIMER), \ + softirq_name(RCU)) /** * irq_handler_entry - called immediately before the irq action handler diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 0a8ec5b..ae5c9ea 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -100,6 +100,7 @@ static char rcu_kthreads_spawnable; static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu); static void invoke_rcu_cpu_kthread(void); +static void __invoke_rcu_cpu_kthread(void); #define RCU_KTHREAD_PRIO 1 /* RT priority for per-CPU kthreads. */ @@ -1442,13 +1443,21 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) } /* If there are callbacks ready, invoke them. */ - rcu_do_batch(rsp, rdp); + if (cpu_has_callbacks_ready_to_invoke(rdp)) + __invoke_rcu_cpu_kthread(); +} + +static void rcu_kthread_do_work(void) +{ + rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data)); + rcu_do_batch(&rcu_bh_state, &__get_cpu_var(rcu_bh_data)); + rcu_preempt_do_callbacks(); } /* * Do softirq processing for the current CPU. */ -static void rcu_process_callbacks(void) +static void rcu_process_callbacks(struct softirq_action *unused) { __rcu_process_callbacks(&rcu_sched_state, &__get_cpu_var(rcu_sched_data)); @@ -1465,7 +1474,7 @@ static void rcu_process_callbacks(void) * the current CPU with interrupts disabled, the rcu_cpu_kthread_task * cannot disappear out from under us. */ -static void invoke_rcu_cpu_kthread(void) +static void __invoke_rcu_cpu_kthread(void) { unsigned long flags; @@ -1479,6 +1488,11 @@ static void invoke_rcu_cpu_kthread(void) local_irq_restore(flags); } +static void invoke_rcu_cpu_kthread(void) +{ + raise_softirq(RCU_SOFTIRQ); +} + /* * Wake up the specified per-rcu_node-structure kthread. * Because the per-rcu_node kthreads are immortal, we don't need @@ -1613,7 +1627,7 @@ static int rcu_cpu_kthread(void *arg) *workp = 0; local_irq_restore(flags); if (work) - rcu_process_callbacks(); + rcu_kthread_do_work(); local_bh_enable(); if (*workp != 0) spincnt++; @@ -2387,6 +2401,7 @@ void __init rcu_init(void) rcu_init_one(&rcu_sched_state, &rcu_sched_data); rcu_init_one(&rcu_bh_state, &rcu_bh_data); __rcu_init_preempt(); + open_softirq(RCU_SOFTIRQ, rcu_process_callbacks); /* * We don't need protection against CPU-hotplug here because diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 7b9a08b..0fed6b9 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -439,6 +439,7 @@ static void rcu_preempt_offline_cpu(int cpu); #endif /* #ifdef CONFIG_HOTPLUG_CPU */ static void rcu_preempt_check_callbacks(int cpu); static void rcu_preempt_process_callbacks(void); +static void rcu_preempt_do_callbacks(void); void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU) static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp); diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index ea2e2fb..38d09c5 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -602,6 +602,11 @@ static void rcu_preempt_process_callbacks(void) &__get_cpu_var(rcu_preempt_data)); } +static void rcu_preempt_do_callbacks(void) +{ + rcu_do_batch(&rcu_preempt_state, &__get_cpu_var(rcu_preempt_data)); +} + /* * Queue a preemptible-RCU callback for invocation after a grace period. */ @@ -997,6 +1002,10 @@ static void rcu_preempt_process_callbacks(void) { } +static void rcu_preempt_do_callbacks(void) +{ +} + /* * Wait for an rcu-preempt grace period, but make it happen quickly. * But because preemptible RCU does not exist, map to rcu-sched. diff --git a/kernel/softirq.c b/kernel/softirq.c index 1396017..40cf63d 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -58,7 +58,7 @@ DEFINE_PER_CPU(struct task_struct *, ksoftirqd); char *softirq_to_name[NR_SOFTIRQS] = { "HI", "TIMER", "NET_TX", "NET_RX", "BLOCK", "BLOCK_IOPOLL", - "TASKLET", "SCHED", "HRTIMER" + "TASKLET", "SCHED", "HRTIMER", "RCU" }; /* diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c index 1e88485..0a7ed5b 100644 --- a/tools/perf/util/trace-event-parse.c +++ b/tools/perf/util/trace-event-parse.c @@ -2187,6 +2187,7 @@ static const struct flag flags[] = { { "TASKLET_SOFTIRQ", 6 }, { "SCHED_SOFTIRQ", 7 }, { "HRTIMER_SOFTIRQ", 8 }, + { "RCU_SOFTIRQ", 9 }, { "HRTIMER_NORESTART", 0 }, { "HRTIMER_RESTART", 1 }, -- cgit v0.10.2 From a7b21165c06f28230768d203285d06cac4f18f0b Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Mon, 13 Jun 2011 09:49:27 +0530 Subject: mwifiex: Fixing NULL pointer dereference Following OOPS was seen when booting with card inserted BUG: unable to handle kernel NULL pointer dereference at 0000004c IP: [] cfg80211_get_drvinfo+0x21/0x115 [cfg80211] *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: iwl3945 iwl_legacy mwifiex_sdio mac80211 11 sdhci_pci sdhci pl2303 'ethtool' on the mwifiex device returned this OOPS as wiphy_dev() returned NULL. Adding missing set_wiphy_dev() call to fix the problem. Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 660831c..687c1f2 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1288,6 +1288,8 @@ int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac, *(unsigned long *) wdev_priv = (unsigned long) priv; + set_wiphy_dev(wdev->wiphy, (struct device *) priv->adapter->dev); + ret = wiphy_register(wdev->wiphy); if (ret < 0) { dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n", -- cgit v0.10.2 From 3373b28e5af4a0b3c6cb39372581dcc1e41322ff Mon Sep 17 00:00:00 2001 From: Nishant Sarmukadam Date: Mon, 13 Jun 2011 16:26:15 +0530 Subject: mwl8k: Tell firmware to generate CCMP header Post commit e4eefec73ea0a740bfe8736e3ac30dfe92fe392b, the stack is not generating the CCMP header for us anymore. This broke the CCMP functionality since firmware was not doing this either. Set a flag to tell the firmware to generate the CCMP header Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 3226118..aeac3cc 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -2474,6 +2474,7 @@ struct mwl8k_cmd_set_hw_spec { * faster client. */ #define MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY 0x00000400 +#define MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR 0x00000200 #define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT 0x00000080 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP 0x00000020 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON 0x00000010 @@ -2510,7 +2511,8 @@ static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw) cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT | MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP | MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON | - MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY); + MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY | + MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR); cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS); cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS); -- cgit v0.10.2 From 8fe7e94eb71430cf63a742f3c19739d82a662758 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 1 Jun 2011 15:31:44 +0200 Subject: oprofile, x86: Fix race in nmi handler while starting counters In some rare cases, nmis are generated immediately after the nmi handler of the cpu was started. This causes the counter not to be enabled. Before enabling the nmi handlers we need to set variable ctr_running first and make sure its value is written to memory. Also, the patch makes all existing barriers a memory barrier instead of a compiler barrier only. Reported-by: Suravee Suthikulpanit Cc: # .35+ Signed-off-by: Robert Richter diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index cf97500..68894fd 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -112,8 +112,10 @@ static void nmi_cpu_start(void *dummy) static int nmi_start(void) { get_online_cpus(); - on_each_cpu(nmi_cpu_start, NULL, 1); ctr_running = 1; + /* make ctr_running visible to the nmi handler: */ + smp_mb(); + on_each_cpu(nmi_cpu_start, NULL, 1); put_online_cpus(); return 0; } @@ -504,15 +506,18 @@ static int nmi_setup(void) nmi_enabled = 0; ctr_running = 0; - barrier(); + /* make variables visible to the nmi handler: */ + smp_mb(); err = register_die_notifier(&profile_exceptions_nb); if (err) goto fail; get_online_cpus(); register_cpu_notifier(&oprofile_cpu_nb); - on_each_cpu(nmi_cpu_setup, NULL, 1); nmi_enabled = 1; + /* make nmi_enabled visible to the nmi handler: */ + smp_mb(); + on_each_cpu(nmi_cpu_setup, NULL, 1); put_online_cpus(); return 0; @@ -531,7 +536,8 @@ static void nmi_shutdown(void) nmi_enabled = 0; ctr_running = 0; put_online_cpus(); - barrier(); + /* make variables visible to the nmi handler: */ + smp_mb(); unregister_die_notifier(&profile_exceptions_nb); msrs = &get_cpu_var(cpu_msrs); model->shutdown(msrs); -- cgit v0.10.2 From e72888e91cc902ccdc089f237b6eed7587e2b4df Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 15 Jun 2011 15:14:49 +0200 Subject: ALSA: lola - Fix section mismatch Add missing __devinit. Signed-off-by: Takashi Iwai diff --git a/sound/pci/lola/lola.c b/sound/pci/lola/lola.c index 34b2428..2692e5a 100644 --- a/sound/pci/lola/lola.c +++ b/sound/pci/lola/lola.c @@ -445,7 +445,7 @@ static void lola_reset_setups(struct lola *chip) lola_setup_all_analog_gains(chip, PLAY, false); /* output, update */ } -static int lola_parse_tree(struct lola *chip) +static int __devinit lola_parse_tree(struct lola *chip) { unsigned int val; int nid, err; -- cgit v0.10.2 From 9e3bd4e24e94d60d2e0762e919aab6c9a7fc0c5b Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Tue, 31 May 2011 21:46:50 -0400 Subject: NFS: fix umount of pnfs filesystems Unmounting a pnfs filesystem hangs using filelayout and possibly others. This fixes the use of the rcu protected node by making use of a new 'tmpnode' for the temporary purge list. Also, the spinlock shouldn't be held when calling synchronize_rcu(). Signed-off-by: Weston Andros Adamson Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 48d0a8e..96bf4e6 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -186,6 +186,7 @@ int pnfs_ld_read_done(struct nfs_read_data *); /* pnfs_dev.c */ struct nfs4_deviceid_node { struct hlist_node node; + struct hlist_node tmpnode; const struct pnfs_layoutdriver_type *ld; const struct nfs_client *nfs_client; struct nfs4_deviceid deviceid; diff --git a/fs/nfs/pnfs_dev.c b/fs/nfs/pnfs_dev.c index c65e133..5944d4b 100644 --- a/fs/nfs/pnfs_dev.c +++ b/fs/nfs/pnfs_dev.c @@ -174,6 +174,7 @@ nfs4_init_deviceid_node(struct nfs4_deviceid_node *d, const struct nfs4_deviceid *id) { INIT_HLIST_NODE(&d->node); + INIT_HLIST_NODE(&d->tmpnode); d->ld = ld; d->nfs_client = nfs_client; d->deviceid = *id; @@ -238,24 +239,29 @@ static void _deviceid_purge_client(const struct nfs_client *clp, long hash) { struct nfs4_deviceid_node *d; - struct hlist_node *n, *next; + struct hlist_node *n; HLIST_HEAD(tmp); + spin_lock(&nfs4_deviceid_lock); rcu_read_lock(); hlist_for_each_entry_rcu(d, n, &nfs4_deviceid_cache[hash], node) if (d->nfs_client == clp && atomic_read(&d->ref)) { hlist_del_init_rcu(&d->node); - hlist_add_head(&d->node, &tmp); + hlist_add_head(&d->tmpnode, &tmp); } rcu_read_unlock(); + spin_unlock(&nfs4_deviceid_lock); if (hlist_empty(&tmp)) return; synchronize_rcu(); - hlist_for_each_entry_safe(d, n, next, &tmp, node) + while (!hlist_empty(&tmp)) { + d = hlist_entry(tmp.first, struct nfs4_deviceid_node, tmpnode); + hlist_del(&d->tmpnode); if (atomic_dec_and_test(&d->ref)) d->ld->free_deviceid_node(d); + } } void @@ -263,8 +269,8 @@ nfs4_deviceid_purge_client(const struct nfs_client *clp) { long h; - spin_lock(&nfs4_deviceid_lock); + if (!(clp->cl_exchange_flags & EXCHGID4_FLAG_USE_PNFS_MDS)) + return; for (h = 0; h < NFS4_DEVICE_ID_HASH_SIZE; h++) _deviceid_purge_client(clp, h); - spin_unlock(&nfs4_deviceid_lock); } -- cgit v0.10.2 From 0b760113a3a155269a3fba93a409c640031dd68f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 31 May 2011 15:15:34 -0400 Subject: NLM: Don't hang forever on NLM unlock requests If the NLM daemon is killed on the NFS server, we can currently end up hanging forever on an 'unlock' request, instead of aborting. Basically, if the rpcbind request fails, or the server keeps returning garbage, we really want to quit instead of retrying. Tested-by: Vasily Averin Signed-off-by: Trond Myklebust Cc: stable@kernel.org diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c index adb45ec..e374050 100644 --- a/fs/lockd/clntproc.c +++ b/fs/lockd/clntproc.c @@ -708,7 +708,13 @@ static void nlmclnt_unlock_callback(struct rpc_task *task, void *data) if (task->tk_status < 0) { dprintk("lockd: unlock failed (err = %d)\n", -task->tk_status); - goto retry_rebind; + switch (task->tk_status) { + case -EACCES: + case -EIO: + goto die; + default: + goto retry_rebind; + } } if (status == NLM_LCK_DENIED_GRACE_PERIOD) { rpc_delay(task, NLMCLNT_GRACE_WAIT); diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index f73c482..fe2d8e6 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -84,7 +84,8 @@ struct rpc_task { #endif unsigned char tk_priority : 2,/* Task priority */ tk_garb_retry : 2, - tk_cred_retry : 2; + tk_cred_retry : 2, + tk_rebind_retry : 2; }; #define tk_xprt tk_client->cl_xprt diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index b84d739..566bcfd 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1175,6 +1175,9 @@ call_bind_status(struct rpc_task *task) status = -EOPNOTSUPP; break; } + if (task->tk_rebind_retry == 0) + break; + task->tk_rebind_retry--; rpc_delay(task, 3*HZ); goto retry_timeout; case -ETIMEDOUT: diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index 6b43ee7..a27406b 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -792,6 +792,7 @@ static void rpc_init_task(struct rpc_task *task, const struct rpc_task_setup *ta /* Initialize retry counters */ task->tk_garb_retry = 2; task->tk_cred_retry = 2; + task->tk_rebind_retry = 2; task->tk_priority = task_setup_data->priority - RPC_PRIORITY_LOW; task->tk_owner = current->tgid; -- cgit v0.10.2 From 0f66b5984df2fe1617c05900a39a7ef493ca9de9 Mon Sep 17 00:00:00 2001 From: Peng Tao Date: Sat, 16 Oct 2010 22:07:46 -0700 Subject: NFS41: do not update isize if inode needs layoutcommit nfs_update_inode will update isize if there is no queued pages. For pNFS, layoutcommit is supposed to change file size on server, the same effect as queued pages. nfs_update_inode may be called when dirty pages are written back (nfsi->npages==0) but layoutcommit is not sent, and it will change client file size according to server file size. Then client ends up losing what it just writes back in pNFS path. So we should skip updating client file size if file needs layoutcommit. Signed-off-by: Peng Tao Cc: stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 144f2a3..3f1eb81 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1294,7 +1294,8 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) if (new_isize != cur_isize) { /* Do we perhaps have any outstanding writes, or has * the file grown beyond our last write? */ - if (nfsi->npages == 0 || new_isize > cur_isize) { + if ((nfsi->npages == 0 && !test_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags)) || + new_isize > cur_isize) { i_size_write(inode, new_isize); invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA; } -- cgit v0.10.2 From c9c30dd5f73dccaa326a54dfcf490316946aea87 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sat, 11 Jun 2011 17:08:39 -0400 Subject: NFSv4.1: deprecate headerpadsz in CREATE_SESSION We don't support header padding yet so better off ditching it Reported-by: Sid Moore Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index d2c4b59..3ca4497 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5098,7 +5098,6 @@ static void nfs4_init_channel_attrs(struct nfs41_create_session_args *args) if (mxresp_sz == 0) mxresp_sz = NFS_MAX_FILE_IO_SIZE; /* Fore channel attributes */ - args->fc_attrs.headerpadsz = 0; args->fc_attrs.max_rqst_sz = mxrqst_sz; args->fc_attrs.max_resp_sz = mxresp_sz; args->fc_attrs.max_ops = NFS4_MAX_OPS; @@ -5111,7 +5110,6 @@ static void nfs4_init_channel_attrs(struct nfs41_create_session_args *args) args->fc_attrs.max_ops, args->fc_attrs.max_reqs); /* Back channel attributes */ - args->bc_attrs.headerpadsz = 0; args->bc_attrs.max_rqst_sz = PAGE_SIZE; args->bc_attrs.max_resp_sz = PAGE_SIZE; args->bc_attrs.max_resp_sz_cached = 0; @@ -5131,8 +5129,6 @@ static int nfs4_verify_fore_channel_attrs(struct nfs41_create_session_args *args struct nfs4_channel_attrs *sent = &args->fc_attrs; struct nfs4_channel_attrs *rcvd = &session->fc_attrs; - if (rcvd->headerpadsz > sent->headerpadsz) - return -EINVAL; if (rcvd->max_resp_sz > sent->max_resp_sz) return -EINVAL; /* diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index d869a5e..c4b7d6c 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -1725,7 +1725,7 @@ static void encode_create_session(struct xdr_stream *xdr, *p++ = cpu_to_be32(args->flags); /*flags */ /* Fore Channel */ - *p++ = cpu_to_be32(args->fc_attrs.headerpadsz); /* header padding size */ + *p++ = cpu_to_be32(0); /* header padding size */ *p++ = cpu_to_be32(args->fc_attrs.max_rqst_sz); /* max req size */ *p++ = cpu_to_be32(args->fc_attrs.max_resp_sz); /* max resp size */ *p++ = cpu_to_be32(max_resp_sz_cached); /* Max resp sz cached */ @@ -1734,7 +1734,7 @@ static void encode_create_session(struct xdr_stream *xdr, *p++ = cpu_to_be32(0); /* rdmachannel_attrs */ /* Back Channel */ - *p++ = cpu_to_be32(args->fc_attrs.headerpadsz); /* header padding size */ + *p++ = cpu_to_be32(0); /* header padding size */ *p++ = cpu_to_be32(args->bc_attrs.max_rqst_sz); /* max req size */ *p++ = cpu_to_be32(args->bc_attrs.max_resp_sz); /* max resp size */ *p++ = cpu_to_be32(args->bc_attrs.max_resp_sz_cached); /* Max resp sz cached */ @@ -4997,12 +4997,14 @@ static int decode_chan_attrs(struct xdr_stream *xdr, struct nfs4_channel_attrs *attrs) { __be32 *p; - u32 nr_attrs; + u32 nr_attrs, val; p = xdr_inline_decode(xdr, 28); if (unlikely(!p)) goto out_overflow; - attrs->headerpadsz = be32_to_cpup(p++); + val = be32_to_cpup(p++); /* headerpadsz */ + if (val) + return -EINVAL; /* no support for header padding yet */ attrs->max_rqst_sz = be32_to_cpup(p++); attrs->max_resp_sz = be32_to_cpup(p++); attrs->max_resp_sz_cached = be32_to_cpup(p++); diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 5e8444a..00848d8 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -158,7 +158,6 @@ struct nfs_seqid; /* nfs41 sessions channel attributes */ struct nfs4_channel_attrs { - u32 headerpadsz; u32 max_rqst_sz; u32 max_resp_sz; u32 max_resp_sz_cached; -- cgit v0.10.2 From 1d92a08da23848a38eece4df7eaa4e8ec0e6c699 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 14 Jun 2011 12:07:38 -0400 Subject: NFSv4.1: Fix a refcounting issue in the pNFS device id cache When we add something to the global device id cache, we need to bump the reference count, so that the cache itself holds a reference. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/pnfs_dev.c b/fs/nfs/pnfs_dev.c index 5944d4b..f0f8e1e 100644 --- a/fs/nfs/pnfs_dev.c +++ b/fs/nfs/pnfs_dev.c @@ -209,6 +209,7 @@ nfs4_insert_deviceid_node(struct nfs4_deviceid_node *new) hlist_add_head_rcu(&new->node, &nfs4_deviceid_cache[hash]); spin_unlock(&nfs4_deviceid_lock); + atomic_inc(&new->ref); return new; } -- cgit v0.10.2 From 533eb4611c9eea53072eb6a61d5a6393b6a77ed7 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Mon, 13 Jun 2011 18:25:56 -0400 Subject: NFSv4.1: allow nfs_fhget to succeed with mounted on fileid Commit 28331a46d88459788c8fca72dbb0415cd7f514c9 "Ensure we request the ordinary fileid when doing readdirplus" changed the meaning of NFS_ATTR_FATTR_FILEID which used to be set when FATTR4_WORD1_MOUNTED_ON_FILED was requested. Allow nfs_fhget to succeed with only a mounted on fileid when crossing a mountpoint or a referral. Ask for the fileid of the absent file system if mounted_on_fileid is not supported. Signed-off-by: Andy Adamson cc:stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 3f1eb81..6f4850d 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -256,7 +256,8 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr) nfs_attr_check_mountpoint(sb, fattr); - if ((fattr->valid & NFS_ATTR_FATTR_FILEID) == 0 && (fattr->valid & NFS_ATTR_FATTR_MOUNTPOINT) == 0) + if (((fattr->valid & NFS_ATTR_FATTR_FILEID) == 0) && + !nfs_attr_use_mounted_on_fileid(fattr)) goto out_no_inode; if ((fattr->valid & NFS_ATTR_FATTR_TYPE) == 0) goto out_no_inode; diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index b9056cb..2a55347 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -45,6 +45,17 @@ static inline void nfs_attr_check_mountpoint(struct super_block *parent, struct fattr->valid |= NFS_ATTR_FATTR_MOUNTPOINT; } +static inline int nfs_attr_use_mounted_on_fileid(struct nfs_fattr *fattr) +{ + if (((fattr->valid & NFS_ATTR_FATTR_MOUNTED_ON_FILEID) == 0) || + (((fattr->valid & NFS_ATTR_FATTR_MOUNTPOINT) == 0) && + ((fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL) == 0))) + return 0; + + fattr->fileid = fattr->mounted_on_fileid; + return 1; +} + struct nfs_clone_mount { const struct super_block *sb; const struct dentry *dentry; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 3ca4497..289c539 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2265,12 +2265,14 @@ static int nfs4_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle, return nfs4_map_errors(status); } +static void nfs_fixup_referral_attributes(struct nfs_fattr *fattr); /* * Get locations and (maybe) other attributes of a referral. * Note that we'll actually follow the referral later when * we detect fsid mismatch in inode revalidation */ -static int nfs4_get_referral(struct inode *dir, const struct qstr *name, struct nfs_fattr *fattr, struct nfs_fh *fhandle) +static int nfs4_get_referral(struct inode *dir, const struct qstr *name, + struct nfs_fattr *fattr, struct nfs_fh *fhandle) { int status = -ENOMEM; struct page *page = NULL; @@ -2288,15 +2290,16 @@ static int nfs4_get_referral(struct inode *dir, const struct qstr *name, struct goto out; /* Make sure server returned a different fsid for the referral */ if (nfs_fsid_equal(&NFS_SERVER(dir)->fsid, &locations->fattr.fsid)) { - dprintk("%s: server did not return a different fsid for a referral at %s\n", __func__, name->name); + dprintk("%s: server did not return a different fsid for" + " a referral at %s\n", __func__, name->name); status = -EIO; goto out; } + /* Fixup attributes for the nfs_lookup() call to nfs_fhget() */ + nfs_fixup_referral_attributes(&locations->fattr); + /* replace the lookup nfs_fattr with the locations nfs_fattr */ memcpy(fattr, &locations->fattr, sizeof(struct nfs_fattr)); - fattr->valid |= NFS_ATTR_FATTR_V4_REFERRAL; - if (!fattr->mode) - fattr->mode = S_IFDIR; memset(fhandle, 0, sizeof(struct nfs_fh)); out: if (page) @@ -4667,11 +4670,15 @@ static size_t nfs4_xattr_list_nfs4_acl(struct dentry *dentry, char *list, return len; } +/* + * nfs_fhget will use either the mounted_on_fileid or the fileid + */ static void nfs_fixup_referral_attributes(struct nfs_fattr *fattr) { - if (!((fattr->valid & NFS_ATTR_FATTR_FILEID) && - (fattr->valid & NFS_ATTR_FATTR_FSID) && - (fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL))) + if (!(((fattr->valid & NFS_ATTR_FATTR_MOUNTED_ON_FILEID) || + (fattr->valid & NFS_ATTR_FATTR_FILEID)) && + (fattr->valid & NFS_ATTR_FATTR_FSID) && + (fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL))) return; fattr->valid |= NFS_ATTR_FATTR_TYPE | NFS_ATTR_FATTR_MODE | @@ -4686,7 +4693,6 @@ int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, struct nfs_server *server = NFS_SERVER(dir); u32 bitmask[2] = { [0] = FATTR4_WORD0_FSID | FATTR4_WORD0_FS_LOCATIONS, - [1] = FATTR4_WORD1_MOUNTED_ON_FILEID, }; struct nfs4_fs_locations_arg args = { .dir_fh = NFS_FH(dir), @@ -4705,11 +4711,18 @@ int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, int status; dprintk("%s: start\n", __func__); + + /* Ask for the fileid of the absent filesystem if mounted_on_fileid + * is not supported */ + if (NFS_SERVER(dir)->attr_bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID) + bitmask[1] |= FATTR4_WORD1_MOUNTED_ON_FILEID; + else + bitmask[0] |= FATTR4_WORD0_FILEID; + nfs_fattr_init(&fs_locations->fattr); fs_locations->server = server; fs_locations->nlocations = 0; status = nfs4_call_sync(server->client, server, &msg, &args.seq_args, &res.seq_res, 0); - nfs_fixup_referral_attributes(&fs_locations->fattr); dprintk("%s: returned status = %d\n", __func__, status); return status; } -- cgit v0.10.2 From cec765cf5891c7fc3d905832b481bfb6fd55825d Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Mon, 13 Jun 2011 18:36:17 -0400 Subject: NFSv4.1: allow zero fh array in filelayout decode layout Signed-off-by: Andy Adamson cc:stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 4269088..5d6f369 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -552,13 +552,18 @@ filelayout_decode_layout(struct pnfs_layout_hdr *flo, __func__, nfl_util, fl->num_fh, fl->first_stripe_index, fl->pattern_offset); - if (!fl->num_fh) + /* Note that a zero value for num_fh is legal for STRIPE_SPARSE. + * Futher checking is done in filelayout_check_layout */ + if (fl->num_fh < 0 || fl->num_fh > + max(NFS4_PNFS_MAX_STRIPE_CNT, NFS4_PNFS_MAX_MULTI_CNT)) goto out_err; - fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *), - gfp_flags); - if (!fl->fh_array) - goto out_err; + if (fl->num_fh > 0) { + fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *), + gfp_flags); + if (!fl->fh_array) + goto out_err; + } for (i = 0; i < fl->num_fh; i++) { /* Do we want to use a mempool here? */ -- cgit v0.10.2 From a2e1d4f2e5ed83850de92a491ef225824cb457bd Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Mon, 13 Jun 2011 18:54:53 -0400 Subject: nfs4.1: fix several problems with _pnfs_return_layout _pnfs_return_layout had the following problems: - it did not call pnfs_free_lseg_list on all paths - it unintentionally did a forgetful return when there was no outstanding io - it raced with concurrent LAYOUTGETS Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 289c539..5879b23 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5706,6 +5706,7 @@ static void nfs4_layoutreturn_done(struct rpc_task *task, void *calldata) { struct nfs4_layoutreturn *lrp = calldata; struct nfs_server *server; + struct pnfs_layout_hdr *lo = NFS_I(lrp->args.inode)->layout; dprintk("--> %s\n", __func__); @@ -5717,16 +5718,15 @@ static void nfs4_layoutreturn_done(struct rpc_task *task, void *calldata) nfs_restart_rpc(task, lrp->clp); return; } + spin_lock(&lo->plh_inode->i_lock); if (task->tk_status == 0) { - struct pnfs_layout_hdr *lo = NFS_I(lrp->args.inode)->layout; - if (lrp->res.lrs_present) { - spin_lock(&lo->plh_inode->i_lock); pnfs_set_layout_stateid(lo, &lrp->res.stateid, true); - spin_unlock(&lo->plh_inode->i_lock); } else BUG_ON(!list_empty(&lo->plh_segs)); } + lo->plh_block_lgets--; + spin_unlock(&lo->plh_inode->i_lock); dprintk("<-- %s\n", __func__); } diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 8c1309d..25de6b2 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -634,12 +634,14 @@ _pnfs_return_layout(struct inode *ino) spin_lock(&ino->i_lock); lo = nfsi->layout; - if (!lo || !mark_matching_lsegs_invalid(lo, &tmp_list, NULL)) { + if (!lo) { spin_unlock(&ino->i_lock); - dprintk("%s: no layout segments to return\n", __func__); - goto out; + dprintk("%s: no layout to return\n", __func__); + return status; } stateid = nfsi->layout->plh_stateid; + mark_matching_lsegs_invalid(lo, &tmp_list, NULL); + lo->plh_block_lgets++; /* Reference matched in nfs4_layoutreturn_release */ get_layout_hdr(lo); spin_unlock(&ino->i_lock); -- cgit v0.10.2 From d771e3a43e23a37398b7e05a9d1b1036d698263c Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Tue, 14 Jun 2011 16:30:16 -0400 Subject: NFSv4.1: fix break condition in pnfs_find_lseg The break condition to skip out of the loop got broken when cmp_layout was change. Essentially, we want to stop looking once we know no layout on the remainder of the list can match the first byte of the looked-up range. Reported-by: Peng Tao Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 25de6b2..d066aad 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -889,7 +889,7 @@ pnfs_find_lseg(struct pnfs_layout_hdr *lo, ret = get_lseg(lseg); break; } - if (cmp_layout(range, &lseg->pls_range) > 0) + if (lseg->pls_range.offset > range->offset) break; } -- cgit v0.10.2 From c7fd06228b994190d8369a2a0acf5224e4e13d1a Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 15 Jun 2011 00:55:44 +0100 Subject: NFS: (d)printks should use %zd for ssize_t arguments (d)printks should use %zd for ssize_t arguments not %ld, otherwise they might get a warning. I see the following with MN10300. fs/nfs/objlayout/objlayout.c: In function 'objlayout_read_done': fs/nfs/objlayout/objlayout.c:294: warning: format '%ld' expects type 'long int', but argument 3 has type 'ssize_t' Signed-off-by: David Howells cc: Trond Myklebust cc: linux-nfs@vger.kernel.org Signed-off-by: Trond Myklebust diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c index dc3956c..1d06f8e 100644 --- a/fs/nfs/objlayout/objlayout.c +++ b/fs/nfs/objlayout/objlayout.c @@ -291,7 +291,7 @@ objlayout_read_done(struct objlayout_io_state *state, ssize_t status, bool sync) struct nfs_read_data *rdata; state->status = status; - dprintk("%s: Begin status=%ld eof=%d\n", __func__, status, eof); + dprintk("%s: Begin status=%zd eof=%d\n", __func__, status, eof); rdata = state->rpcdata; rdata->task.tk_status = status; if (status >= 0) { -- cgit v0.10.2 From 1ed3a8539af7b36aa5c977f304e80f7fc8d27bfc Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Wed, 15 Jun 2011 11:39:57 -0400 Subject: NFSv4.1: need to put_layout_hdr on _pnfs_return_layout error path We always get a reference on the layout header and we rely on nfs4_layoutreturn_release to put it. If we hit an allocation error before starting the rpc proc we bail out early without dereferncing the layout header properly. Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index d066aad..8f95822 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -652,6 +652,7 @@ _pnfs_return_layout(struct inode *ino) lrp = kzalloc(sizeof(*lrp), GFP_KERNEL); if (unlikely(lrp == NULL)) { status = -ENOMEM; + put_layout_hdr(lo); goto out; } -- cgit v0.10.2 From ea0ded748bdea78f9e2fefb571f7d6ce9edb4f89 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Wed, 15 Jun 2011 12:31:02 -0400 Subject: nfs4.1: prevent race that allowed use of freed layout in _pnfs_return_layout mark_matching_lsegs_invalid could put the last ref to the layout, so the get_layout_hdr needs to be called first. Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 8f95822..730d4db 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -640,10 +640,10 @@ _pnfs_return_layout(struct inode *ino) return status; } stateid = nfsi->layout->plh_stateid; - mark_matching_lsegs_invalid(lo, &tmp_list, NULL); - lo->plh_block_lgets++; /* Reference matched in nfs4_layoutreturn_release */ get_layout_hdr(lo); + mark_matching_lsegs_invalid(lo, &tmp_list, NULL); + lo->plh_block_lgets++; spin_unlock(&ino->i_lock); pnfs_free_lseg_list(&tmp_list); -- cgit v0.10.2 From 71d7aed014457147e8f71a843d5fbf03235e4a85 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 14 Jun 2011 14:24:32 -0400 Subject: Btrfs: fix path leakage on subvol deletion The delayed ref patch accidently removed the btrfs_free_path in btrfs_unlink_subvol, this puts it back and means we don't leak a path. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c15636b..5813dec 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3076,6 +3076,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, ret = btrfs_update_inode(trans, root, dir); BUG_ON(ret); + btrfs_free_path(path); return 0; } -- cgit v0.10.2 From 8351583e3f6e430ce8f71913909a96ad5cc6a2f6 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 14 Jun 2011 15:16:14 -0400 Subject: Btrfs: protect the pending_snapshots list with trans_lock Currently there is nothing protecting the pending_snapshots list on the transaction. We only hold the directory mutex that we are snapshotting and a read lock on the subvol_sem, so we could race with somebody else creating a snapshot in a different directory and end up with list corruption. So protect this list with the trans_lock. Thanks, Signed-off-by: Josef Bacik diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index b793d11..a3c4751 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -482,8 +482,10 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry, ret = btrfs_snap_reserve_metadata(trans, pending_snapshot); BUG_ON(ret); + spin_lock(&root->fs_info->trans_lock); list_add(&pending_snapshot->list, &trans->transaction->pending_snapshots); + spin_unlock(&root->fs_info->trans_lock); if (async_transid) { *async_transid = trans->transid; ret = btrfs_commit_transaction_async(trans, -- cgit v0.10.2 From ed0ca14021e5ae3147602128641aa7f742ab227c Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 14 Jun 2011 16:22:15 -0400 Subject: Btrfs: set no_trans_join after trying to expand the transaction We can lockup if we try to allow new writers join the transaction and we have flushoncommit set or have a pending snapshot. This is because we set no_trans_join and then loop around and try to wait for ordered extents again. The problem is the ordered endio stuff needs to join the transaction, which it can't do because no_trans_join is set. So instead wait until after this loop to set no_trans_join and then make sure to wait for num_writers == 1 in case anybody got started in between us exiting the loop and setting no_trans_join. This could easily be reproduced by mounting -o flushoncommit and running xfstest 13. It cannot be reproduced with this patch. Thanks, Reported-by: Jim Schutt Signed-off-by: Josef Bacik diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 2b3590b..5669559 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1241,12 +1241,20 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, schedule_timeout(1); finish_wait(&cur_trans->writer_wait, &wait); - spin_lock(&root->fs_info->trans_lock); - root->fs_info->trans_no_join = 1; - spin_unlock(&root->fs_info->trans_lock); } while (atomic_read(&cur_trans->num_writers) > 1 || (should_grow && cur_trans->num_joined != joined)); + /* + * Ok now we need to make sure to block out any other joins while we + * commit the transaction. We could have started a join before setting + * no_join so make sure to wait for num_writers to == 1 again. + */ + spin_lock(&root->fs_info->trans_lock); + root->fs_info->trans_no_join = 1; + spin_unlock(&root->fs_info->trans_lock); + wait_event(cur_trans->writer_wait, + atomic_read(&cur_trans->num_writers) == 1); + ret = create_pending_snapshots(trans, root->fs_info); BUG_ON(ret); -- cgit v0.10.2 From 330605423ca6eafafb8dcc27502bce1c585d1b06 Mon Sep 17 00:00:00 2001 From: Ilia Kolomisnky Date: Wed, 15 Jun 2011 06:52:26 +0300 Subject: Bluetooth: Fix L2CAP connection establishment In hci_conn_security ( which is used during L2CAP connection establishment ) test for HCI_CONN_ENCRYPT_PEND state also sets this state, which is bogus and leads to connection time-out on L2CAP sockets in certain situations (especially when using non-ssp devices ) Signed-off-by: Ilia Kolomisnky Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index b9aa986..d3a05b9 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -608,7 +608,7 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) goto encrypt; auth: - if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) + if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) return 0; if (!hci_conn_auth(conn, sec_level, auth_type)) -- cgit v0.10.2 From 900cba8881b39dfbc7c8062098504ab93f5387a8 Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Fri, 18 Dec 2009 10:31:31 +0100 Subject: xen: support CONFIG_MAXSMP The MAXSMP config option requires CPUMASK_OFFSTACK, which in turn requires we init the memory for the maps while we bring up the cpus. MAXSMP also increases NR_CPUS to 4096. This increase in size exposed an issue in the argument construction for multicalls from xen_flush_tlb_others. The args should only need space for the actual number of cpus. Also in 2.6.39 it exposes a bootup problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] set_cpu_sibling_map+0x123/0x30d ... Call Trace: [] ? xen_restore_fl_direct_reloc+0x4/0x4 [] xen_smp_prepare_cpus+0x36/0x135 .. CC: stable@kernel.org Signed-off-by: Andrew Jones [v2: Updated to compile on 3.0] [v3: Updated to compile when CONFIG_SMP is not defined] Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index afe1d54..673e968 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -59,6 +59,7 @@ #include #include #include +#include #include #include @@ -1231,7 +1232,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, { struct { struct mmuext_op op; - DECLARE_BITMAP(mask, NR_CPUS); + DECLARE_BITMAP(mask, num_processors); } *args; struct multicall_space mcs; diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 41038c0..b4533a8 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -205,11 +205,18 @@ static void __init xen_smp_prepare_boot_cpu(void) static void __init xen_smp_prepare_cpus(unsigned int max_cpus) { unsigned cpu; + unsigned int i; xen_init_lock_cpu(0); smp_store_cpu_info(0); cpu_data(0).x86_max_cores = 1; + + for_each_possible_cpu(i) { + zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL); + zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL); + zalloc_cpumask_var(&per_cpu(cpu_llc_shared_map, i), GFP_KERNEL); + } set_cpu_sibling_map(0); if (xen_smp_intr_init(0)) -- cgit v0.10.2 From b5328cd14557880e9eb757a8a9c8a88f1b23533a Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 15 Jun 2011 14:24:29 -0400 Subject: xen: Fix compile warning when CONFIG_SMP is not defined. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit .. which is quite benign. drivers/xen/events.c:398: warning: unused variable ‘desc’ Signed-off-by: Konrad Rzeszutek Wilk diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 553da68..30df85d 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -395,9 +395,9 @@ static void unmask_evtchn(int port) static void xen_irq_init(unsigned irq) { struct irq_info *info; +#ifdef CONFIG_SMP struct irq_desc *desc = irq_to_desc(irq); -#ifdef CONFIG_SMP /* By default all event channels notify CPU#0. */ cpumask_copy(desc->irq_data.affinity, cpumask_of(0)); #endif -- cgit v0.10.2 From 9e2dfdb3081edfae66a49013517e80dd8a0469fa Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Wed, 15 Jun 2011 14:32:02 -0400 Subject: nfs4.1: mark layout as bad on error path in _pnfs_return_layout Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 730d4db..539b94c 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -652,6 +652,8 @@ _pnfs_return_layout(struct inode *ino) lrp = kzalloc(sizeof(*lrp), GFP_KERNEL); if (unlikely(lrp == NULL)) { status = -ENOMEM; + set_bit(NFS_LAYOUT_RW_FAILED, &lo->plh_flags); + set_bit(NFS_LAYOUT_RO_FAILED, &lo->plh_flags); put_layout_hdr(lo); goto out; } -- cgit v0.10.2 From b2abe50688dcb470e2e46109da7e7e02245ed59b Mon Sep 17 00:00:00 2001 From: Tom Goetz Date: Mon, 16 May 2011 15:06:26 -0400 Subject: xen: When calling power_off, don't call the halt function. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit .. As it won't actually power off the machine. Reported-by: Sven Köhler Tested-by: Sven Köhler Signed-off-by: Tom Goetz Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index dd7b88f..5525163 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1033,6 +1033,13 @@ static void xen_machine_halt(void) xen_reboot(SHUTDOWN_poweroff); } +static void xen_machine_power_off(void) +{ + if (pm_power_off) + pm_power_off(); + xen_reboot(SHUTDOWN_poweroff); +} + static void xen_crash_shutdown(struct pt_regs *regs) { xen_reboot(SHUTDOWN_crash); @@ -1058,7 +1065,7 @@ int xen_panic_handler_init(void) static const struct machine_ops xen_machine_ops __initconst = { .restart = xen_restart, .halt = xen_machine_halt, - .power_off = xen_machine_halt, + .power_off = xen_machine_power_off, .shutdown = xen_machine_halt, .crash_shutdown = xen_crash_shutdown, .emergency_restart = xen_emergency_restart, -- cgit v0.10.2 From fa75ac379e63c2864e9049b5e8615e40f65c1e70 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Sun, 5 Jun 2011 23:10:04 -0700 Subject: xhci: Reject double add of active endpoints. While trying to switch a UAS device from the BOT configuration to the UAS configuration via the bConfigurationValue file, Tanya ran into an issue in the USB core. usb_disable_device() sets entries in udev->ep_out and udev->ep_out to NULL, but doesn't call into the xHCI bandwidth management functions to remove the BOT configuration endpoints from the xHCI host's internal structures. The USB core would then attempt to add endpoints for the UAS configuration, and some of the endpoints had the same address as endpoints in the BOT configuration. The xHCI driver blindly added the endpoints again, but the xHCI host controller rejected the Configure Endpoint command because active endpoints were added without being dropped. Make the xHCI driver reject calls to xhci_add_endpoint() that attempt to add active endpoints without first calling xhci_drop_endpoint(). This should be backported to kernels as old as 2.6.31. Signed-off-by: Sarah Sharp Reported-by: Tanya Brokhman Cc: stable@kernel.org diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 06e7023..e5a0171 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1401,6 +1401,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, u32 added_ctxs; unsigned int last_ctx; u32 new_add_flags, new_drop_flags, new_slot_info; + struct xhci_virt_device *virt_dev; int ret = 0; ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); @@ -1425,11 +1426,25 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, return 0; } - in_ctx = xhci->devs[udev->slot_id]->in_ctx; - out_ctx = xhci->devs[udev->slot_id]->out_ctx; + virt_dev = xhci->devs[udev->slot_id]; + in_ctx = virt_dev->in_ctx; + out_ctx = virt_dev->out_ctx; ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); ep_index = xhci_get_endpoint_index(&ep->desc); ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + + /* If this endpoint is already in use, and the upper layers are trying + * to add it again without dropping it, reject the addition. + */ + if (virt_dev->eps[ep_index].ring && + !(le32_to_cpu(ctrl_ctx->drop_flags) & + xhci_get_endpoint_flag(&ep->desc))) { + xhci_warn(xhci, "Trying to add endpoint 0x%x " + "without dropping it.\n", + (unsigned int) ep->desc.bEndpointAddress); + return -EINVAL; + } + /* If the HCD has already noted the endpoint is enabled, * ignore this request. */ @@ -1445,8 +1460,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, * process context, not interrupt context (or so documenation * for usb_set_interface() and usb_set_configuration() claim). */ - if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id], - udev, ep, GFP_NOIO) < 0) { + if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) { dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n", __func__, ep->desc.bEndpointAddress); return -ENOMEM; -- cgit v0.10.2 From fccf4e86200b8f5edd9a65da26f150e32ba79808 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Sun, 5 Jun 2011 23:22:22 -0700 Subject: USB: Free bandwidth when usb_disable_device is called. Tanya ran into an issue when trying to switch a UAS device from the BOT configuration to the UAS configuration via the bConfigurationValue sysfs file. Before installing the UAS configuration, set_bConfigurationValue() calls usb_disable_device(). That function is supposed to remove all host controller resources associated with that device, but it leaves some state in the xHCI host controller. Commit 0791971ba8fbc44e4f476079f856335ed45e6324 usb: allow drivers to use allocated bandwidth until unbound added a call to usb_disable_device() in usb_set_configuration(), before the xHCI bandwidth functions were invoked. That commit fixed a bug, but also introduced a bug that is triggered when a configured device is switched to a new configuration. usb_disable_device() goes through all the motions of unbinding the drivers attached to active interfaces and removing the USB core structures associated with those interfaces, but it doesn't actually remove the endpoints from the internal xHCI host controller bandwidth structures. When usb_disable_device() calls usb_disable_endpoint() with reset_hardware set to true, the entries in udev->ep_out and udev->ep_in will be set to NULL. Usually, when the USB core installs a new configuration, usb_hcd_alloc_bandwidth() will drop all non-NULL endpoints in udev->ep_out and udev->ep_in before adding any new endpoints. However, when the new UAS configuration was added, all those entries were null, so none of the old endpoints in the BOT configuration were dropped. The xHCI driver blindly added the UAS configuration endpoints, and some of the endpoint addresses overlapped with the old BOT configuration endpoints. This caused the xHCI host to reject the Configure Endpoint command. Now that the xHCI driver code is cleaned up to reject a double-add of active endpoints, we need to fix the USB core to properly drop old endpoints in usb_disable_device(). If the host controller driver needs bandwidth checking support, make usb_disable_device() call usb_disable_endpoint() with reset_hardware set to false, drop the endpoints from the xHCI host controller, and then call usb_disable_endpoint() again with reset_hardware set to true. The first call to usb_disable_endpoint() will cancel any pending URBs and wait on them to be freed in usb_hcd_disable_endpoint(), but will keep the pointers in udev->ep_out and udev->ep in intact. Then usb_hcd_alloc_bandwidth() will use those pointers to know which endpoints to drop. The final call to usb_disable_endpoint() will do two things: 1. It will call usb_hcd_disable_endpoint() again, which should be harmless since the ep->urb_list should be empty after the first call to usb_disable_endpoint() returns. 2. It will set the entries in udev->ep_out and udev->ep in to NULL, and call usb_hcd_disable_endpoint(). That call will have no effect, since the xHCI driver doesn't set the endpoint_disable function pointer. Note that usb_disable_device() will now need to be called with hcd->bandwidth_mutex held. This should be backported to kernels as old as 2.6.32. Signed-off-by: Sarah Sharp Reported-by: Tanya Brokhman Cc: ablay@codeaurora.org Cc: Alan Stern Cc: stable@kernel.org diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 90ae175..ca339bc 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1634,6 +1634,7 @@ void usb_disconnect(struct usb_device **pdev) { struct usb_device *udev = *pdev; int i; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); if (!udev) { pr_debug ("%s nodev\n", __func__); @@ -1661,7 +1662,9 @@ void usb_disconnect(struct usb_device **pdev) * so that the hardware is now fully quiesced. */ dev_dbg (&udev->dev, "unregistering device\n"); + mutex_lock(hcd->bandwidth_mutex); usb_disable_device(udev, 0); + mutex_unlock(hcd->bandwidth_mutex); usb_hcd_synchronize_unlinks(udev); usb_remove_ep_devs(&udev->ep0); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 5701e85..64c7ab4 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1135,10 +1135,13 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, * Deallocates hcd/hardware state for the endpoints (nuking all or most * pending urbs) and usbcore state for the interfaces, so that usbcore * must usb_set_configuration() before any interfaces could be used. + * + * Must be called with hcd->bandwidth_mutex held. */ void usb_disable_device(struct usb_device *dev, int skip_ep0) { int i; + struct usb_hcd *hcd = bus_to_hcd(dev->bus); /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) @@ -1172,6 +1175,16 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); + if (hcd->driver->check_bandwidth) { + /* First pass: Cancel URBs, leave endpoint pointers intact. */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, false); + usb_disable_endpoint(dev, i + USB_DIR_IN, false); + } + /* Remove endpoints from the host controller internal state */ + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + /* Second pass: remove endpoint pointers */ + } for (i = skip_ep0; i < 16; ++i) { usb_disable_endpoint(dev, i, true); usb_disable_endpoint(dev, i + USB_DIR_IN, true); @@ -1727,6 +1740,7 @@ free_interfaces: /* if it's already configured, clear out old state first. * getting rid of old interfaces means unbinding their drivers. */ + mutex_lock(hcd->bandwidth_mutex); if (dev->state != USB_STATE_ADDRESS) usb_disable_device(dev, 1); /* Skip ep0 */ @@ -1739,7 +1753,6 @@ free_interfaces: * host controller will not allow submissions to dropped endpoints. If * this call fails, the device state is unchanged. */ - mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); if (ret < 0) { mutex_unlock(hcd->bandwidth_mutex); -- cgit v0.10.2 From d23336329fa4c157ed6256d4279a73b87486a1b6 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 6 Jun 2011 00:53:47 -0700 Subject: xhci: Don't warn about zeroed bMaxBurst descriptor field. The USB 3.0 specification says that the bMaxBurst field in the SuperSpeed Endpoint Companion descriptor is supposed to indicate how many packets a SS device can handle before it needs to wait for an explicit handshake from the host controller. A zero value means the device can only handle one packet before it needs a handshake. Remove a warning in the xHCI driver that implies this is an invalid value. Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 0f8e1d2..fcb7f7e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1215,8 +1215,6 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ max_packet = ep->ss_ep_comp.bMaxBurst; - if (!max_packet) - xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n"); ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet)); break; case USB_SPEED_HIGH: -- cgit v0.10.2 From e1cf486d881d853d710e2d86a7adfc5fd260990f Mon Sep 17 00:00:00 2001 From: Alex He Date: Fri, 3 Jun 2011 15:58:25 +0800 Subject: xHCI 1.0: Force Stopped Event(FSE) FSE shall occur on the TD natural boundary. The software ep_ring dequeue pointer exceed the hardware ep_ring dequeue pointer in these cases of Table-3. As a result, the event_trb(pointed by hardware dequeue pointer) of the FSE can't be found in the current TD(pointed by software dequeue pointer). What should we do is to figured out the FSE case and skip over it. Signed-off-by: Alex He Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 800f417..0c00849 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2063,6 +2063,20 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Is this a TRB in the currently executing TD? */ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, td->last_trb, event_dma); + + /* + * Skip the Force Stopped Event. The event_trb(event_dma) of FSE + * is not in the current TD pointed by ep_ring->dequeue because + * that the hardware dequeue pointer still at the previous TRB + * of the current TD. The previous TRB maybe a Link TD or the + * last TRB of the previous TD. The command completion handle + * will take care the rest. + */ + if (!event_seg && trb_comp_code == COMP_STOP_INVAL) { + ret = 0; + goto cleanup; + } + if (!event_seg) { if (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { -- cgit v0.10.2 From 578333ab95f70db13951d30a9ad6b565b61639a9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 15 Jun 2011 16:32:46 -0400 Subject: USB: change maintainership of ohci-hcd and ehci-hcd Following the loss of David Brownell, I volunteer to maintain the ohci-hcd and ehci-hcd drivers. This patch (as1472) makes it official. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index e50fc6e..4307673 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6430,8 +6430,9 @@ S: Maintained F: drivers/usb/misc/rio500* USB EHCI DRIVER +M: Alan Stern L: linux-usb@vger.kernel.org -S: Orphan +S: Maintained F: Documentation/usb/ehci.txt F: drivers/usb/host/ehci* @@ -6490,8 +6491,9 @@ S: Maintained F: sound/usb/midi.* USB OHCI DRIVER +M: Alan Stern L: linux-usb@vger.kernel.org -S: Orphan +S: Maintained F: Documentation/usb/ohci.txt F: drivers/usb/host/ohci* diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b435ed6..f8030ee 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1,4 +1,8 @@ /* + * Enhanced Host Controller Interface (EHCI) driver for USB. + * + * Maintainer: Alan Stern + * * Copyright (c) 2000-2004 by David Brownell * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 9aa10bd..f9cf3f0 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1,5 +1,7 @@ /* - * OHCI HCD (Host Controller Driver) for USB. + * Open Host Controller Interface (OHCI) driver for USB. + * + * Maintainer: Alan Stern * * (C) Copyright 1999 Roman Weissgaerber * (C) Copyright 2000-2004 David Brownell -- cgit v0.10.2 From cbb330045e5df8f665ac60227ff898421fc8fb92 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 15 Jun 2011 16:29:16 -0400 Subject: USB: don't let the hub driver prevent system sleep This patch (as1465) continues implementation of the policy that errors during suspend or hibernation should not prevent the system from going to sleep. In this case, failure to turn on the Suspend feature for a hub port shouldn't be reported as an error. There are situations where this does actually occur (such as when the device plugged into that port was disconnected in the recent past), and it turns out to be harmless. There's no reason for it to prevent a system sleep. Also, don't allow the hub driver to fail a system suspend if the downstream ports aren't all suspended. This is also harmless (and should never happen, given the change mentioned above); printing a warning message in the kernel log is all we really need to do. Signed-off-by: Alan Stern CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 90ae175..c2ac087 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2362,6 +2362,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + + /* System sleep transitions should never fail */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; } else { /* device has up to 10 msec to fully suspend */ dev_dbg(&udev->dev, "usb %ssuspend\n", @@ -2611,16 +2615,15 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *hdev = hub->hdev; unsigned port1; - /* fail if children aren't already suspended */ + /* Warn if children aren't already suspended */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; udev = hdev->children [port1-1]; if (udev && udev->can_submit) { - if (!(msg.event & PM_EVENT_AUTO)) - dev_dbg(&intf->dev, "port %d nyet suspended\n", - port1); - return -EBUSY; + dev_warn(&intf->dev, "port %d nyet suspended\n", port1); + if (msg.event & PM_EVENT_AUTO) + return -EBUSY; } } -- cgit v0.10.2 From 0af212ba8f123c2eba151af7726c34a50b127962 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 15 Jun 2011 16:27:43 -0400 Subject: USB: don't let errors prevent system sleep This patch (as1464) implements the recommended policy that most errors during suspend or hibernation should not prevent the system from going to sleep. In particular, failure to suspend a USB driver or a USB device should not prevent the sleep from succeeding: Failure to suspend a device won't matter, because the device will automatically go into suspend mode when the USB bus stops carrying packets. (This might be less true for USB-3.0 devices, but let's not worry about them now.) Failure of a driver to suspend might lead to trouble later on when the system wakes up, but it isn't sufficient reason to prevent the system from going to sleep. Signed-off-by: Alan Stern CC: Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e35a176..81add81 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1187,13 +1187,22 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) for (i = n - 1; i >= 0; --i) { intf = udev->actconfig->interface[i]; status = usb_suspend_interface(udev, intf, msg); + + /* Ignore errors during system sleep transitions */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; if (status != 0) break; } } - if (status == 0) + if (status == 0) { status = usb_suspend_device(udev, msg); + /* Again, ignore errors during system sleep transitions */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; + } + /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); -- cgit v0.10.2 From a46e0899eec7a3069bcadd45dfba7bf67c6ed016 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 15 Jun 2011 15:47:09 -0700 Subject: rcu: use softirq instead of kthreads except when RCU_BOOST=y This patch #ifdefs RCU kthreads out of the kernel unless RCU_BOOST=y, thus eliminating context-switch overhead if RCU priority boosting has not been configured. Signed-off-by: Paul E. McKenney diff --git a/kernel/rcutree.c b/kernel/rcutree.c index ae5c9ea..429d494 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -87,6 +87,8 @@ static struct rcu_state *rcu_state; int rcu_scheduler_active __read_mostly; EXPORT_SYMBOL_GPL(rcu_scheduler_active); +#ifdef CONFIG_RCU_BOOST + /* * Control variables for per-CPU and per-rcu_node kthreads. These * handle all flavors of RCU. @@ -98,9 +100,11 @@ DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops); DEFINE_PER_CPU(char, rcu_cpu_has_work); static char rcu_kthreads_spawnable; +#endif /* #ifdef CONFIG_RCU_BOOST */ + static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu); -static void invoke_rcu_cpu_kthread(void); -static void __invoke_rcu_cpu_kthread(void); +static void invoke_rcu_core(void); +static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp); #define RCU_KTHREAD_PRIO 1 /* RT priority for per-CPU kthreads. */ @@ -1089,6 +1093,7 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) int need_report = 0; struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu); struct rcu_node *rnp; +#ifdef CONFIG_RCU_BOOST struct task_struct *t; /* Stop the CPU's kthread. */ @@ -1097,6 +1102,7 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) per_cpu(rcu_cpu_kthread_task, cpu) = NULL; kthread_stop(t); } +#endif /* #ifdef CONFIG_RCU_BOOST */ /* Exclude any attempts to start a new grace period. */ raw_spin_lock_irqsave(&rsp->onofflock, flags); @@ -1232,7 +1238,7 @@ static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp) /* Re-raise the RCU softirq if there are callbacks remaining. */ if (cpu_has_callbacks_ready_to_invoke(rdp)) - invoke_rcu_cpu_kthread(); + invoke_rcu_core(); } /* @@ -1278,7 +1284,7 @@ void rcu_check_callbacks(int cpu, int user) } rcu_preempt_check_callbacks(cpu); if (rcu_pending(cpu)) - invoke_rcu_cpu_kthread(); + invoke_rcu_core(); } #ifdef CONFIG_SMP @@ -1444,9 +1450,11 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) /* If there are callbacks ready, invoke them. */ if (cpu_has_callbacks_ready_to_invoke(rdp)) - __invoke_rcu_cpu_kthread(); + invoke_rcu_callbacks(rsp, rdp); } +#ifdef CONFIG_RCU_BOOST + static void rcu_kthread_do_work(void) { rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data)); @@ -1454,6 +1462,8 @@ static void rcu_kthread_do_work(void) rcu_preempt_do_callbacks(); } +#endif /* #ifdef CONFIG_RCU_BOOST */ + /* * Do softirq processing for the current CPU. */ @@ -1474,25 +1484,22 @@ static void rcu_process_callbacks(struct softirq_action *unused) * the current CPU with interrupts disabled, the rcu_cpu_kthread_task * cannot disappear out from under us. */ -static void __invoke_rcu_cpu_kthread(void) +static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) { - unsigned long flags; - - local_irq_save(flags); - __this_cpu_write(rcu_cpu_has_work, 1); - if (__this_cpu_read(rcu_cpu_kthread_task) == NULL) { - local_irq_restore(flags); + if (likely(!rsp->boost)) { + rcu_do_batch(rsp, rdp); return; } - wake_up_process(__this_cpu_read(rcu_cpu_kthread_task)); - local_irq_restore(flags); + invoke_rcu_callbacks_kthread(); } -static void invoke_rcu_cpu_kthread(void) +static void invoke_rcu_core(void) { raise_softirq(RCU_SOFTIRQ); } +#ifdef CONFIG_RCU_BOOST + /* * Wake up the specified per-rcu_node-structure kthread. * Because the per-rcu_node kthreads are immortal, we don't need @@ -1818,6 +1825,18 @@ static int __init rcu_spawn_kthreads(void) } early_initcall(rcu_spawn_kthreads); +#else /* #ifdef CONFIG_RCU_BOOST */ + +static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu) +{ +} + +static void rcu_cpu_kthread_setrt(int cpu, int to_rt) +{ +} + +#endif /* #else #ifdef CONFIG_RCU_BOOST */ + static void __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), struct rcu_state *rsp) @@ -2224,6 +2243,8 @@ static void __cpuinit rcu_prepare_cpu(int cpu) rcu_preempt_init_percpu_data(cpu); } +#ifdef CONFIG_RCU_BOOST + static void __cpuinit rcu_prepare_kthreads(int cpu) { struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu); @@ -2237,6 +2258,14 @@ static void __cpuinit rcu_prepare_kthreads(int cpu) } } +#else /* #ifdef CONFIG_RCU_BOOST */ + +static void __cpuinit rcu_prepare_kthreads(int cpu) +{ +} + +#endif /* #else #ifdef CONFIG_RCU_BOOST */ + /* * Handle CPU online/offline notification events. */ diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 0fed6b9..434288c 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -369,6 +369,7 @@ struct rcu_state { /* period because */ /* force_quiescent_state() */ /* was running. */ + u8 boost; /* Subject to priority boost. */ unsigned long gpnum; /* Current gp number. */ unsigned long completed; /* # of last completed gp. */ @@ -439,7 +440,6 @@ static void rcu_preempt_offline_cpu(int cpu); #endif /* #ifdef CONFIG_HOTPLUG_CPU */ static void rcu_preempt_check_callbacks(int cpu); static void rcu_preempt_process_callbacks(void); -static void rcu_preempt_do_callbacks(void); void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU) static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp); @@ -451,11 +451,15 @@ static void rcu_preempt_send_cbs_to_online(void); static void __init __rcu_init_preempt(void); static void rcu_needs_cpu_flush(void); static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags); +static void rcu_preempt_boost_start_gp(struct rcu_node *rnp); +static void invoke_rcu_callbacks_kthread(void); +#ifdef CONFIG_RCU_BOOST +static void rcu_preempt_do_callbacks(void); static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, cpumask_var_t cm); -static void rcu_preempt_boost_start_gp(struct rcu_node *rnp); static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, struct rcu_node *rnp, int rnp_index); +#endif /* #ifdef CONFIG_RCU_BOOST */ #endif /* #ifndef RCU_TREE_NONCORE */ diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 38d09c5..2772386 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -602,11 +602,15 @@ static void rcu_preempt_process_callbacks(void) &__get_cpu_var(rcu_preempt_data)); } +#ifdef CONFIG_RCU_BOOST + static void rcu_preempt_do_callbacks(void) { rcu_do_batch(&rcu_preempt_state, &__get_cpu_var(rcu_preempt_data)); } +#endif /* #ifdef CONFIG_RCU_BOOST */ + /* * Queue a preemptible-RCU callback for invocation after a grace period. */ @@ -1002,10 +1006,6 @@ static void rcu_preempt_process_callbacks(void) { } -static void rcu_preempt_do_callbacks(void) -{ -} - /* * Wait for an rcu-preempt grace period, but make it happen quickly. * But because preemptible RCU does not exist, map to rcu-sched. @@ -1258,6 +1258,23 @@ static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) } /* + * Wake up the per-CPU kthread to invoke RCU callbacks. + */ +static void invoke_rcu_callbacks_kthread(void) +{ + unsigned long flags; + + local_irq_save(flags); + __this_cpu_write(rcu_cpu_has_work, 1); + if (__this_cpu_read(rcu_cpu_kthread_task) == NULL) { + local_irq_restore(flags); + return; + } + wake_up_process(__this_cpu_read(rcu_cpu_kthread_task)); + local_irq_restore(flags); +} + +/* * Set the affinity of the boost kthread. The CPU-hotplug locks are * held, so no one should be messing with the existence of the boost * kthread. @@ -1297,6 +1314,7 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, if (&rcu_preempt_state != rsp) return 0; + rsp->boost = 1; if (rnp->boost_kthread_task != NULL) return 0; t = kthread_create(rcu_boost_kthread, (void *)rnp, @@ -1319,22 +1337,15 @@ static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) raw_spin_unlock_irqrestore(&rnp->lock, flags); } -static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, - cpumask_var_t cm) +static void invoke_rcu_callbacks_kthread(void) { + WARN_ON_ONCE(1); } static void rcu_preempt_boost_start_gp(struct rcu_node *rnp) { } -static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, - struct rcu_node *rnp, - int rnp_index) -{ - return 0; -} - #endif /* #else #ifdef CONFIG_RCU_BOOST */ #ifndef CONFIG_SMP @@ -1509,7 +1520,7 @@ static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff); * * Because it is not legal to invoke rcu_process_callbacks() with irqs * disabled, we do one pass of force_quiescent_state(), then do a - * invoke_rcu_cpu_kthread() to cause rcu_process_callbacks() to be invoked + * invoke_rcu_core() to cause rcu_process_callbacks() to be invoked * later. The per-cpu rcu_dyntick_drain variable controls the sequencing. */ int rcu_needs_cpu(int cpu) @@ -1560,7 +1571,7 @@ int rcu_needs_cpu(int cpu) /* If RCU callbacks are still pending, RCU still needs this CPU. */ if (c) - invoke_rcu_cpu_kthread(); + invoke_rcu_core(); return c; } diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index 9678cc3..4e14487 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -46,6 +46,8 @@ #define RCU_TREE_NONCORE #include "rcutree.h" +#ifdef CONFIG_RCU_BOOST + DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_status); DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_cpu); DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_loops); @@ -58,6 +60,8 @@ static char convert_kthread_status(unsigned int kthread_status) return "SRWOY"[kthread_status]; } +#endif /* #ifdef CONFIG_RCU_BOOST */ + static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) { if (!rdp->beenonline) @@ -76,7 +80,7 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) rdp->dynticks_fqs); #endif /* #ifdef CONFIG_NO_HZ */ seq_printf(m, " of=%lu ri=%lu", rdp->offline_fqs, rdp->resched_ipi); - seq_printf(m, " ql=%ld qs=%c%c%c%c kt=%d/%c/%d ktl=%x b=%ld", + seq_printf(m, " ql=%ld qs=%c%c%c%c", rdp->qlen, ".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] != rdp->nxttail[RCU_NEXT_TAIL]], @@ -84,13 +88,16 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) rdp->nxttail[RCU_NEXT_READY_TAIL]], ".W"[rdp->nxttail[RCU_DONE_TAIL] != rdp->nxttail[RCU_WAIT_TAIL]], - ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]], + ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]]); +#ifdef CONFIG_RCU_BOOST + seq_printf(m, " kt=%d/%c/%d ktl=%x", per_cpu(rcu_cpu_has_work, rdp->cpu), convert_kthread_status(per_cpu(rcu_cpu_kthread_status, rdp->cpu)), per_cpu(rcu_cpu_kthread_cpu, rdp->cpu), - per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff, - rdp->blimit); + per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff); +#endif /* #ifdef CONFIG_RCU_BOOST */ + seq_printf(m, " b=%ld", rdp->blimit); seq_printf(m, " ci=%lu co=%lu ca=%lu\n", rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted); } @@ -147,18 +154,21 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) rdp->dynticks_fqs); #endif /* #ifdef CONFIG_NO_HZ */ seq_printf(m, ",%lu,%lu", rdp->offline_fqs, rdp->resched_ipi); - seq_printf(m, ",%ld,\"%c%c%c%c\",%d,\"%c\",%ld", rdp->qlen, + seq_printf(m, ",%ld,\"%c%c%c%c\"", rdp->qlen, ".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] != rdp->nxttail[RCU_NEXT_TAIL]], ".R"[rdp->nxttail[RCU_WAIT_TAIL] != rdp->nxttail[RCU_NEXT_READY_TAIL]], ".W"[rdp->nxttail[RCU_DONE_TAIL] != rdp->nxttail[RCU_WAIT_TAIL]], - ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]], + ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]]); +#ifdef CONFIG_RCU_BOOST + seq_printf(m, ",%d,\"%c\"", per_cpu(rcu_cpu_has_work, rdp->cpu), convert_kthread_status(per_cpu(rcu_cpu_kthread_status, - rdp->cpu)), - rdp->blimit); + rdp->cpu))); +#endif /* #ifdef CONFIG_RCU_BOOST */ + seq_printf(m, ",%ld", rdp->blimit); seq_printf(m, ",%lu,%lu,%lu\n", rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted); } @@ -169,7 +179,11 @@ static int show_rcudata_csv(struct seq_file *m, void *unused) #ifdef CONFIG_NO_HZ seq_puts(m, "\"dt\",\"dt nesting\",\"dt NMI nesting\",\"df\","); #endif /* #ifdef CONFIG_NO_HZ */ - seq_puts(m, "\"of\",\"ri\",\"ql\",\"b\",\"ci\",\"co\",\"ca\"\n"); + seq_puts(m, "\"of\",\"ri\",\"ql\",\"qs\""); +#ifdef CONFIG_RCU_BOOST + seq_puts(m, "\"kt\",\"ktl\""); +#endif /* #ifdef CONFIG_RCU_BOOST */ + seq_puts(m, ",\"b\",\"ci\",\"co\",\"ca\"\n"); #ifdef CONFIG_TREE_PREEMPT_RCU seq_puts(m, "\"rcu_preempt:\"\n"); PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data_csv, m); -- cgit v0.10.2 From 203db2952bc87f5d610c9ad53a7d02b85897721f Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 15 Jun 2011 23:03:38 +0200 Subject: tools/perf: Fix static build of perf tool To build a statically linked version of the perf tool all needed libraries must be added in the correct order to get the symbols resolved. Currently this is broken when, e.g. python or newt support is enabled -- libpython needs libpthread which is an unconditional link dependency of the perf tool; libslang needs libm, another unconditional dependency. To solve the problem in the long run without the need to keep track of transitive library dependencies, simply make the linker look at the EXTLIBS multiple times until it has all symbols resolved. Signed-off-by: Mathias Krause Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/1308171818-20370-1-git-send-email-minipli@googlemail.com Signed-off-by: Ingo Molnar diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 032ba63..940257b 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -633,7 +633,7 @@ prefix_SQ = $(subst ','\'',$(prefix)) SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) -LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive $(EXTLIBS) +LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group $(EXTLIBS) -Wl,--end-group ALL_CFLAGS += $(BASIC_CFLAGS) ALL_CFLAGS += $(ARCH_CFLAGS) -- cgit v0.10.2 From c3a4924565e2eecf2539871abd123d35be6d76d5 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 16 Jun 2011 12:21:34 +0200 Subject: Revert "HID: magicmouse: ignore 'ivalid report id' while switching modes" This reverts commit 23746a66d7d9e73402c68ef00d708796b97ebd72. It turned out that the actual reason for failure is not the device firmware, but bug in Bluetooth stack, which will be fixed by patch by Ville Tervo which corrects the mask handling for CSR 1.1 Dongles. Reported-and-tested-by: Ed Tomlinson Reported-and-tested-by: Chase Douglas Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c index a5eda4c..0ec91c1 100644 --- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -501,17 +501,9 @@ static int magicmouse_probe(struct hid_device *hdev, } report->size = 6; - /* - * The device reponds with 'invalid report id' when feature - * report switching it into multitouch mode is sent to it. - * - * This results in -EIO from the _raw low-level transport callback, - * but there seems to be no other way of switching the mode. - * Thus the super-ugly hacky success check below. - */ ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature), HID_FEATURE_REPORT); - if (ret != -EIO) { + if (ret != sizeof(feature)) { hid_err(hdev, "unable to request touch data (%d)\n", ret); goto err_stop_hw; } -- cgit v0.10.2 From 55b220cafadd71b9f83759f7b396998b2547dc5f Mon Sep 17 00:00:00 2001 From: Ambresh K Date: Wed, 15 Jun 2011 13:40:45 -0700 Subject: gpio/omap4: Fix missing interrupts during device wakeup due to IOPAD. If gpio pins from bank[2-5] are marked as wakeup enable and if the wake is through gpio IO pad wakeup, then that wakeup gpio interrupt is lost. In the current implementation, GPIO driver stores the context of DATAIN of all the gpio in the bank. During GPIO resuming, it checks DATAIN with wakeup enabled pins of gpio bank. If there is status change, then manually toggle GPIO_LEVELDETECT to generate pseudo interrupt. Reported-by: Philippe Mazet Tested-by: Philippe Mazet Signed-off-by: Ambresh K Signed-off-by: Grant Likely diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 01f74a8..35bebde 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -469,8 +469,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, + OMAP24XX_GPIO_CLEARWKUENA); } } - /* This part needs to be executed always for OMAP34xx */ - if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { + /* This part needs to be executed always for OMAP{34xx, 44xx} */ + if (cpu_is_omap34xx() || cpu_is_omap44xx() || + (bank->non_wakeup_gpios & gpio_bit)) { /* * Log the edge gpio and manually trigger the IRQ * after resume if the input level changes -- cgit v0.10.2 From 158f1e95180d01ebfd7cd5c8de23050528303f26 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 14 Jun 2011 17:06:02 -0700 Subject: gpio: include linux/gpio.h where needed Some files use GPIOF_ macros but don't include the header file for them. These macros are being moved to , so add includes for where needed. Signed-off-by: Randy Dunlap Signed-off-by: Grant Likely diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 7fe7406..094279a 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c index 435002d..712baab 100644 --- a/drivers/pcmcia/pxa2xx_vpac270.c +++ b/drivers/pcmcia/pxa2xx_vpac270.c @@ -11,6 +11,7 @@ * */ +#include #include #include -- cgit v0.10.2 From c001fb72a7b705f902bdfdd05b5d2408efe6f848 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 14 Jun 2011 17:05:11 -0700 Subject: gpio: add GPIOF_ values regardless on kconfig settings Make GPIOF_ defined values available even when GPIOLIB nor GENERIC_GPIO is enabled by moving them to . Fixes these build errors in linux-next: sound/soc/codecs/ak4641.c:524: error: 'GPIOF_OUT_INIT_LOW' undeclared (first use in this function) sound/soc/codecs/wm8915.c:2921: error: 'GPIOF_OUT_INIT_LOW' undeclared (first use in this function) Signed-off-by: Randy Dunlap Signed-off-by: Grant Likely diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index fcdcb5d..d494001 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -170,16 +170,6 @@ extern int __gpio_cansleep(unsigned gpio); extern int __gpio_to_irq(unsigned gpio); -#define GPIOF_DIR_OUT (0 << 0) -#define GPIOF_DIR_IN (1 << 0) - -#define GPIOF_INIT_LOW (0 << 1) -#define GPIOF_INIT_HIGH (1 << 1) - -#define GPIOF_IN (GPIOF_DIR_IN) -#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW) -#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) - /** * struct gpio - a structure describing a GPIO with configuration * @gpio: the GPIO number diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 32d47e7..17b5a0d 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -3,6 +3,17 @@ /* see Documentation/gpio.txt */ +/* make these flag values available regardless of GPIO kconfig options */ +#define GPIOF_DIR_OUT (0 << 0) +#define GPIOF_DIR_IN (1 << 0) + +#define GPIOF_INIT_LOW (0 << 1) +#define GPIOF_INIT_HIGH (1 << 1) + +#define GPIOF_IN (GPIOF_DIR_IN) +#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW) +#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) + #ifdef CONFIG_GENERIC_GPIO #include -- cgit v0.10.2 From 63f6fe92c6b3cbf4c0bbbea4b31fdd3d68e21e4d Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 16 Jun 2011 17:16:37 +0200 Subject: netfilter: ip_tables: fix compile with debug Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Patrick McHardy diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index 7647438..24e556e 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -566,7 +566,7 @@ check_entry(const struct ipt_entry *e, const char *name) const struct xt_entry_target *t; if (!ip_checkentry(&e->ip)) { - duprintf("ip check failed %p %s.\n", e, par->match->name); + duprintf("ip check failed %p %s.\n", e, name); return -EINVAL; } -- cgit v0.10.2 From 58d5a0257d2fd89fbe4451f704193cc95b0a9c97 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 16 Jun 2011 17:24:17 +0200 Subject: netfilter: ipt_ecn: fix protocol check in ecn_mt_check() Check for protocol inversion in ecn_mt_check() and remove the unnecessary runtime check for IPPROTO_TCP in ecn_mt(). Signed-off-by: Patrick McHardy diff --git a/net/ipv4/netfilter/ipt_ecn.c b/net/ipv4/netfilter/ipt_ecn.c index af6e9c7..aaa85be 100644 --- a/net/ipv4/netfilter/ipt_ecn.c +++ b/net/ipv4/netfilter/ipt_ecn.c @@ -76,8 +76,6 @@ static bool ecn_mt(const struct sk_buff *skb, struct xt_action_param *par) return false; if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR)) { - if (ip_hdr(skb)->protocol != IPPROTO_TCP) - return false; if (!match_tcp(skb, info, &par->hotdrop)) return false; } @@ -97,7 +95,7 @@ static int ecn_mt_check(const struct xt_mtchk_param *par) return -EINVAL; if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR) && - ip->proto != IPPROTO_TCP) { + (ip->proto != IPPROTO_TCP || ip->invflags & IPT_INV_PROTO)) { pr_info("cannot match TCP bits in rule for non-tcp packets\n"); return -EINVAL; } -- cgit v0.10.2 From db898aa2ef6529fa80891e754d353063611c77de Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 16 Jun 2011 17:24:55 +0200 Subject: netfilter: ipt_ecn: fix inversion for IP header ECN match Userspace allows to specify inversion for IP header ECN matches, the kernel silently accepts it, but doesn't invert the match result. Signed-off-by: Patrick McHardy diff --git a/net/ipv4/netfilter/ipt_ecn.c b/net/ipv4/netfilter/ipt_ecn.c index aaa85be..2b57e52 100644 --- a/net/ipv4/netfilter/ipt_ecn.c +++ b/net/ipv4/netfilter/ipt_ecn.c @@ -25,7 +25,8 @@ MODULE_LICENSE("GPL"); static inline bool match_ip(const struct sk_buff *skb, const struct ipt_ecn_info *einfo) { - return (ip_hdr(skb)->tos & IPT_ECN_IP_MASK) == einfo->ip_ect; + return ((ip_hdr(skb)->tos & IPT_ECN_IP_MASK) == einfo->ip_ect) ^ + !!(einfo->invert & IPT_ECN_OP_MATCH_IP); } static inline bool match_tcp(const struct sk_buff *skb, -- cgit v0.10.2 From 2c38de4c1f8da799bdca0e4bb40ca13f2174d3e8 Mon Sep 17 00:00:00 2001 From: Nicolas Cavallari Date: Thu, 16 Jun 2011 17:27:04 +0200 Subject: netfilter: fix looped (broad|multi)cast's MAC handling By default, when broadcast or multicast packet are sent from a local application, they are sent to the interface then looped by the kernel to other local applications, going throught netfilter hooks in the process. These looped packet have their MAC header removed from the skb by the kernel looping code. This confuse various netfilter's netlink queue, netlink log and the legacy ip_queue, because they try to extract a hardware address from these packets, but extracts a part of the IP header instead. This patch prevent NFQUEUE, NFLOG and ip_QUEUE to include a MAC header if there is none in the packet. Signed-off-by: Nicolas Cavallari Signed-off-by: Patrick McHardy diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c index f7f9bd7..5c9b9d9 100644 --- a/net/ipv4/netfilter/ip_queue.c +++ b/net/ipv4/netfilter/ip_queue.c @@ -203,7 +203,8 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp) else pmsg->outdev_name[0] = '\0'; - if (entry->indev && entry->skb->dev) { + if (entry->indev && entry->skb->dev && + entry->skb->mac_header != entry->skb->network_header) { pmsg->hw_type = entry->skb->dev->type; pmsg->hw_addrlen = dev_parse_header(entry->skb, pmsg->hw_addr); diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c index 065fe40..2493948 100644 --- a/net/ipv6/netfilter/ip6_queue.c +++ b/net/ipv6/netfilter/ip6_queue.c @@ -204,7 +204,8 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp) else pmsg->outdev_name[0] = '\0'; - if (entry->indev && entry->skb->dev) { + if (entry->indev && entry->skb->dev && + entry->skb->mac_header != entry->skb->network_header) { pmsg->hw_type = entry->skb->dev->type; pmsg->hw_addrlen = dev_parse_header(entry->skb, pmsg->hw_addr); } diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index e0ee010..2e7ccbb 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -456,7 +456,8 @@ __build_packet_message(struct nfulnl_instance *inst, if (skb->mark) NLA_PUT_BE32(inst->skb, NFULA_MARK, htonl(skb->mark)); - if (indev && skb->dev) { + if (indev && skb->dev && + skb->mac_header != skb->network_header) { struct nfulnl_msg_packet_hw phw; int len = dev_parse_header(skb, phw.hw_addr); if (len > 0) { diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index b83123f..fdd2faf 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -335,7 +335,8 @@ nfqnl_build_packet_message(struct nfqnl_instance *queue, if (entskb->mark) NLA_PUT_BE32(skb, NFQA_MARK, htonl(entskb->mark)); - if (indev && entskb->dev) { + if (indev && entskb->dev && + entskb->mac_header != entskb->network_header) { struct nfqnl_msg_packet_hw phw; int len = dev_parse_header(entskb, phw.hw_addr); if (len) { -- cgit v0.10.2 From 42c1edd345c8412d96e7a362ee06feb7be73bb6c Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Thu, 16 Jun 2011 17:29:22 +0200 Subject: netfilter: nf_nat: avoid double seq_adjust for loopback Avoid double seq adjustment for loopback traffic because it causes silent repetition of TCP data. One example is passive FTP with DNAT rule and difference in the length of IP addresses. This patch adds check if packet is sent and received via loopback device. As the same conntrack is used both for outgoing and incoming direction, we restrict seq adjustment to happen only in POSTROUTING. Signed-off-by: Julian Anastasov Signed-off-by: Patrick McHardy diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index c7c42e7..5d4f8e5 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -307,6 +307,12 @@ static inline int nf_ct_is_untracked(const struct nf_conn *ct) return test_bit(IPS_UNTRACKED_BIT, &ct->status); } +/* Packet is received from loopback */ +static inline bool nf_is_loopback_packet(const struct sk_buff *skb) +{ + return skb->dev && skb->skb_iif && skb->dev->flags & IFF_LOOPBACK; +} + extern int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp); extern unsigned int nf_conntrack_htable_size; extern unsigned int nf_conntrack_max; diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c index db10075..de9da21 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c @@ -121,7 +121,9 @@ static unsigned int ipv4_confirm(unsigned int hooknum, return ret; } - if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status)) { + /* adjust seqs for loopback traffic only in outgoing direction */ + if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status) && + !nf_is_loopback_packet(skb)) { typeof(nf_nat_seq_adjust_hook) seq_adjust; seq_adjust = rcu_dereference(nf_nat_seq_adjust_hook); -- cgit v0.10.2 From a27a263bae072a499acc77b632238a6dacccf888 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 16 Jun 2011 12:02:23 +0000 Subject: xfs: make log devices with write back caches work There's no reason not to support cache flushing on external log devices. The only thing this really requires is flushing the data device first both in fsync and log commits. A side effect is that we also have to remove the barrier write test during mount, which has been superflous since the new FLUSH+FUA code anyway. Also use the chance to flush the RT subvolume write cache before the fsync commit, which is required for correct semantics. Signed-off-by: Christoph Hellwig Signed-off-by: Alex Elder diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c index f4213ba..7f782af 100644 --- a/fs/xfs/linux-2.6/xfs_file.c +++ b/fs/xfs/linux-2.6/xfs_file.c @@ -131,19 +131,34 @@ xfs_file_fsync( { struct inode *inode = file->f_mapping->host; struct xfs_inode *ip = XFS_I(inode); + struct xfs_mount *mp = ip->i_mount; struct xfs_trans *tp; int error = 0; int log_flushed = 0; trace_xfs_file_fsync(ip); - if (XFS_FORCED_SHUTDOWN(ip->i_mount)) + if (XFS_FORCED_SHUTDOWN(mp)) return -XFS_ERROR(EIO); xfs_iflags_clear(ip, XFS_ITRUNCATED); xfs_ioend_wait(ip); + if (mp->m_flags & XFS_MOUNT_BARRIER) { + /* + * If we have an RT and/or log subvolume we need to make sure + * to flush the write cache the device used for file data + * first. This is to ensure newly written file data make + * it to disk before logging the new inode size in case of + * an extending write. + */ + if (XFS_IS_REALTIME_INODE(ip)) + xfs_blkdev_issue_flush(mp->m_rtdev_targp); + else if (mp->m_logdev_targp != mp->m_ddev_targp) + xfs_blkdev_issue_flush(mp->m_ddev_targp); + } + /* * We always need to make sure that the required inode state is safe on * disk. The inode might be clean but we still might need to force the @@ -175,9 +190,9 @@ xfs_file_fsync( * updates. The sync transaction will also force the log. */ xfs_iunlock(ip, XFS_ILOCK_SHARED); - tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_FSYNC_TS); + tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS); error = xfs_trans_reserve(tp, 0, - XFS_FSYNC_TS_LOG_RES(ip->i_mount), 0, 0, 0); + XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0); if (error) { xfs_trans_cancel(tp, 0); return -error; @@ -209,28 +224,25 @@ xfs_file_fsync( * force the log. */ if (xfs_ipincount(ip)) { - error = _xfs_log_force_lsn(ip->i_mount, + error = _xfs_log_force_lsn(mp, ip->i_itemp->ili_last_lsn, XFS_LOG_SYNC, &log_flushed); } xfs_iunlock(ip, XFS_ILOCK_SHARED); } - if (ip->i_mount->m_flags & XFS_MOUNT_BARRIER) { - /* - * If the log write didn't issue an ordered tag we need - * to flush the disk cache for the data device now. - */ - if (!log_flushed) - xfs_blkdev_issue_flush(ip->i_mount->m_ddev_targp); - - /* - * If this inode is on the RT dev we need to flush that - * cache as well. - */ - if (XFS_IS_REALTIME_INODE(ip)) - xfs_blkdev_issue_flush(ip->i_mount->m_rtdev_targp); - } + /* + * If we only have a single device, and the log force about was + * a no-op we might have to flush the data device cache here. + * This can only happen for fdatasync/O_DSYNC if we were overwriting + * an already allocated file and thus do not have any metadata to + * commit. + */ + if ((mp->m_flags & XFS_MOUNT_BARRIER) && + mp->m_logdev_targp == mp->m_ddev_targp && + !XFS_IS_REALTIME_INODE(ip) && + !log_flushed) + xfs_blkdev_issue_flush(mp->m_ddev_targp); return -error; } diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 1e3a7ce..a1a881e 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -627,68 +627,6 @@ xfs_blkdev_put( blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); } -/* - * Try to write out the superblock using barriers. - */ -STATIC int -xfs_barrier_test( - xfs_mount_t *mp) -{ - xfs_buf_t *sbp = xfs_getsb(mp, 0); - int error; - - XFS_BUF_UNDONE(sbp); - XFS_BUF_UNREAD(sbp); - XFS_BUF_UNDELAYWRITE(sbp); - XFS_BUF_WRITE(sbp); - XFS_BUF_UNASYNC(sbp); - XFS_BUF_ORDERED(sbp); - - xfsbdstrat(mp, sbp); - error = xfs_buf_iowait(sbp); - - /* - * Clear all the flags we set and possible error state in the - * buffer. We only did the write to try out whether barriers - * worked and shouldn't leave any traces in the superblock - * buffer. - */ - XFS_BUF_DONE(sbp); - XFS_BUF_ERROR(sbp, 0); - XFS_BUF_UNORDERED(sbp); - - xfs_buf_relse(sbp); - return error; -} - -STATIC void -xfs_mountfs_check_barriers(xfs_mount_t *mp) -{ - int error; - - if (mp->m_logdev_targp != mp->m_ddev_targp) { - xfs_notice(mp, - "Disabling barriers, not supported with external log device"); - mp->m_flags &= ~XFS_MOUNT_BARRIER; - return; - } - - if (xfs_readonly_buftarg(mp->m_ddev_targp)) { - xfs_notice(mp, - "Disabling barriers, underlying device is readonly"); - mp->m_flags &= ~XFS_MOUNT_BARRIER; - return; - } - - error = xfs_barrier_test(mp); - if (error) { - xfs_notice(mp, - "Disabling barriers, trial barrier write failed"); - mp->m_flags &= ~XFS_MOUNT_BARRIER; - return; - } -} - void xfs_blkdev_issue_flush( xfs_buftarg_t *buftarg) @@ -1240,14 +1178,6 @@ xfs_fs_remount( switch (token) { case Opt_barrier: mp->m_flags |= XFS_MOUNT_BARRIER; - - /* - * Test if barriers are actually working if we can, - * else delay this check until the filesystem is - * marked writeable. - */ - if (!(mp->m_flags & XFS_MOUNT_RDONLY)) - xfs_mountfs_check_barriers(mp); break; case Opt_nobarrier: mp->m_flags &= ~XFS_MOUNT_BARRIER; @@ -1282,8 +1212,6 @@ xfs_fs_remount( /* ro -> rw */ if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) { mp->m_flags &= ~XFS_MOUNT_RDONLY; - if (mp->m_flags & XFS_MOUNT_BARRIER) - xfs_mountfs_check_barriers(mp); /* * If this is the first remount to writeable state we @@ -1465,9 +1393,6 @@ xfs_fs_fill_super( if (error) goto out_free_sb; - if (mp->m_flags & XFS_MOUNT_BARRIER) - xfs_mountfs_check_barriers(mp); - error = xfs_filestream_mount(mp); if (error) goto out_free_sb; diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 2119302..41d5b8f 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -1372,8 +1372,17 @@ xlog_sync(xlog_t *log, XFS_BUF_ASYNC(bp); bp->b_flags |= XBF_LOG_BUFFER; - if (log->l_mp->m_flags & XFS_MOUNT_BARRIER) + if (log->l_mp->m_flags & XFS_MOUNT_BARRIER) { + /* + * If we have an external log device, flush the data device + * before flushing the log to make sure all meta data + * written back from the AIL actually made it to disk + * before writing out the new log tail LSN in the log buffer. + */ + if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp) + xfs_blkdev_issue_flush(log->l_mp->m_ddev_targp); XFS_BUF_ORDERED(bp); + } ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1); ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize); -- cgit v0.10.2 From ee7b75fc4f3ae49e1f25bf56219bb5de3c29afaf Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 16 Jun 2011 13:15:41 -0400 Subject: NFSv4: Fix a readdir regression Commit 7ebb9315 (NFS: use secinfo when crossing mountpoints) introduces a regression when decoding an NFSv4 readdir entry that sets the rdattr_error field. By treating the resulting value as if it is a decoding error, the current code may cause us to skip valid readdir entries. Reported-by: Andy Adamson Cc: stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index c4b7d6c..5db44a8 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -3098,7 +3098,7 @@ out_overflow: return -EIO; } -static int decode_attr_error(struct xdr_stream *xdr, uint32_t *bitmap) +static int decode_attr_error(struct xdr_stream *xdr, uint32_t *bitmap, int32_t *res) { __be32 *p; @@ -3109,7 +3109,7 @@ static int decode_attr_error(struct xdr_stream *xdr, uint32_t *bitmap) if (unlikely(!p)) goto out_overflow; bitmap[0] &= ~FATTR4_WORD0_RDATTR_ERROR; - return -be32_to_cpup(p); + *res = -be32_to_cpup(p); } return 0; out_overflow: @@ -4070,6 +4070,7 @@ static int decode_getfattr_attrs(struct xdr_stream *xdr, uint32_t *bitmap, int status; umode_t fmode = 0; uint32_t type; + int32_t err; status = decode_attr_type(xdr, bitmap, &type); if (status < 0) @@ -4095,13 +4096,12 @@ static int decode_getfattr_attrs(struct xdr_stream *xdr, uint32_t *bitmap, goto xdr_error; fattr->valid |= status; - status = decode_attr_error(xdr, bitmap); - if (status == -NFS4ERR_WRONGSEC) { - nfs_fixup_secinfo_attributes(fattr, fh); - status = 0; - } + err = 0; + status = decode_attr_error(xdr, bitmap, &err); if (status < 0) goto xdr_error; + if (err == -NFS4ERR_WRONGSEC) + nfs_fixup_secinfo_attributes(fattr, fh); status = decode_attr_filehandle(xdr, bitmap, fh); if (status < 0) -- cgit v0.10.2 From b5199515c25cca622495eb9c6a8a1d275e775088 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 16 Jun 2011 16:22:08 +0200 Subject: clocksource: Make watchdog robust vs. interruption The clocksource watchdog code is interruptible and it has been observed that this can trigger false positives which disable the TSC. The reason is that an interrupt storm or a long running interrupt handler between the read of the watchdog source and the read of the TSC brings the two far enough apart that the delta is larger than the unstable treshold. Move both reads into a short interrupt disabled region to avoid that. Reported-and-tested-by: Vernon Mauery Signed-off-by: Thomas Gleixner Cc: stable@kernel.org diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index d4646b4..18a1baf 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -188,6 +188,7 @@ struct clocksource { #ifdef CONFIG_CLOCKSOURCE_WATCHDOG /* Watchdog related data, used by the framework */ struct list_head wd_list; + cycle_t cs_last; cycle_t wd_last; #endif } ____cacheline_aligned; diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index 1c95fd6..e0980f0 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -185,7 +185,6 @@ static struct clocksource *watchdog; static struct timer_list watchdog_timer; static DECLARE_WORK(watchdog_work, clocksource_watchdog_work); static DEFINE_SPINLOCK(watchdog_lock); -static cycle_t watchdog_last; static int watchdog_running; static int clocksource_watchdog_kthread(void *data); @@ -254,11 +253,6 @@ static void clocksource_watchdog(unsigned long data) if (!watchdog_running) goto out; - wdnow = watchdog->read(watchdog); - wd_nsec = clocksource_cyc2ns((wdnow - watchdog_last) & watchdog->mask, - watchdog->mult, watchdog->shift); - watchdog_last = wdnow; - list_for_each_entry(cs, &watchdog_list, wd_list) { /* Clocksource already marked unstable? */ @@ -268,19 +262,28 @@ static void clocksource_watchdog(unsigned long data) continue; } + local_irq_disable(); csnow = cs->read(cs); + wdnow = watchdog->read(watchdog); + local_irq_enable(); /* Clocksource initialized ? */ if (!(cs->flags & CLOCK_SOURCE_WATCHDOG)) { cs->flags |= CLOCK_SOURCE_WATCHDOG; - cs->wd_last = csnow; + cs->wd_last = wdnow; + cs->cs_last = csnow; continue; } - /* Check the deviation from the watchdog clocksource. */ - cs_nsec = clocksource_cyc2ns((csnow - cs->wd_last) & + wd_nsec = clocksource_cyc2ns((wdnow - cs->wd_last) & watchdog->mask, + watchdog->mult, watchdog->shift); + + cs_nsec = clocksource_cyc2ns((csnow - cs->cs_last) & cs->mask, cs->mult, cs->shift); - cs->wd_last = csnow; + cs->cs_last = csnow; + cs->wd_last = wdnow; + + /* Check the deviation from the watchdog clocksource. */ if (abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) { clocksource_unstable(cs, cs_nsec - wd_nsec); continue; @@ -318,7 +321,6 @@ static inline void clocksource_start_watchdog(void) return; init_timer(&watchdog_timer); watchdog_timer.function = clocksource_watchdog; - watchdog_last = watchdog->read(watchdog); watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL; add_timer_on(&watchdog_timer, cpumask_first(cpu_online_mask)); watchdog_running = 1; -- cgit v0.10.2 From acd049c6e99d2ad1195666195230f6881d1c1588 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Jun 2011 13:07:19 -0400 Subject: xen/setup: Fix for incorrect xen_extra_mem_start. The earlier attempts (24bdb0b62cc82120924762ae6bc85afc8c3f2b26) at fixing this problem caused other problems to surface (PV guests with no PCI passthrough would have SWIOTLB turned on - which meant 64MB of precious contingous DMA32 memory being eaten up per guest). The problem was: "on xen we add an extra memory region at the end of the e820, and on this particular machine this extra memory region would start below 4g and cross over the 4g boundary: [0xfee01000-0x192655000) Unfortunately e820_end_of_low_ram_pfn does not expect an e820 layout like that so it returns 4g, therefore initial_memory_mapping will map [0 - 0x100000000), that is a memory range that includes some reserved memory regions." The memory range was the IOAPIC regions, and with the 1-1 mapping turned on, it would map them as RAM, not as MMIO regions. This caused the hypervisor to complain. Fortunately this is experienced only under the initial domain so we guard for it. Acked-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index be1a464..60aeeb5 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -227,11 +227,7 @@ char * __init xen_memory_setup(void) memcpy(map_raw, map, sizeof(map)); e820.nr_map = 0; -#ifdef CONFIG_X86_32 xen_extra_mem_start = mem_end; -#else - xen_extra_mem_start = max((1ULL << 32), mem_end); -#endif for (i = 0; i < memmap.nr_entries; i++) { unsigned long long end; @@ -266,6 +262,12 @@ char * __init xen_memory_setup(void) if (map[i].size > 0) e820_add_region(map[i].addr, map[i].size, map[i].type); } + /* Align the balloon area so that max_low_pfn does not get set + * to be at the _end_ of the PCI gap at the far end (fee01000). + * Note that xen_extra_mem_start gets set in the loop above to be + * past the last E820 region. */ + if (xen_initial_domain() && (xen_extra_mem_start < (1ULL<<32))) + xen_extra_mem_start = (1ULL<<32); /* * In domU, the ISA region is normal, usable memory, but we -- cgit v0.10.2 From 7263287af93db4d5cf324a30546f2143419b7900 Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Tue, 14 Jun 2011 13:23:28 -0700 Subject: tty: n_gsm: Fixed logic to decode break signal from modem status The modem status can be one or 2 octets and contains the V.24 signals and in the 2 octet case also the break signal. We were improperly decoding the break signal from the modem in the 2 octet case. Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 09e8c7d..7290394 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -984,10 +984,22 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data, */ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, - u32 modem) + u32 modem, int clen) { int mlines = 0; - u8 brk = modem >> 6; + u8 brk = 0; + + /* The modem status command can either contain one octet (v.24 signals) + or two octets (v.24 signals + break signals). The length field will + either be 2 or 3 respectively. This is specified in section + 5.4.6.3.7 of the 27.010 mux spec. */ + + if (clen == 2) + modem = modem & 0x7f; + else { + brk = modem & 0x7f; + modem = (modem >> 7) & 0x7f; + }; /* Flow control/ready to communicate */ if (modem & MDM_FC) { @@ -1061,7 +1073,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) return; } tty = tty_port_tty_get(&dlci->port); - gsm_process_modem(tty, dlci, modem); + gsm_process_modem(tty, dlci, modem, clen); if (tty) { tty_wakeup(tty); tty_kref_put(tty); @@ -1482,12 +1494,13 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci) * open we shovel the bits down it, if not we drop them. */ -static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) +static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen) { /* krefs .. */ struct tty_port *port = &dlci->port; struct tty_struct *tty = tty_port_tty_get(port); unsigned int modem = 0; + int len = clen; if (debug & 16) pr_debug("%d bytes for tty %p\n", len, tty); @@ -1507,7 +1520,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) if (len == 0) return; } - gsm_process_modem(tty, dlci, modem); + gsm_process_modem(tty, dlci, modem, clen); /* Line state will go via DLCI 0 controls only */ case 1: default: -- cgit v0.10.2 From 57f2104f39995bac332ddc492fbf60aa28e0c35e Mon Sep 17 00:00:00 2001 From: Russ Gorby Date: Tue, 14 Jun 2011 13:23:29 -0700 Subject: tty: n_gsm: improper skb_pull() use was leaking framed data gsm_dlci_data_output_framed() was doing: memcpy(dp, skb_pull(dlci->skb, len), len); The problem is skb_pull() returns the post-increment data ptr so the first chunk of dlci->skb->data is leaked. Signed-off-by: Russ Gorby Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 7290394..19b4ae0 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -875,7 +875,8 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, *dp++ = last << 7 | first << 6 | 1; /* EA */ len--; } - memcpy(dp, skb_pull(dlci->skb, len), len); + memcpy(dp, dlci->skb->data, len); + skb_pull(dlci->skb, len); __gsm_data_queue(dlci, msg); if (last) dlci->skb = NULL; -- cgit v0.10.2 From c16d51a32bbb61ac8fd96f78b5ce2fccfe0fb4c3 Mon Sep 17 00:00:00 2001 From: Shreshtha Kumar Sahu Date: Mon, 13 Jun 2011 10:11:33 +0200 Subject: amba pl011: workaround for uart registers lockup This workaround aims to break the deadlock situation which raises during continuous transfer of data for long duration over uart with hardware flow control. It is observed that CTS interrupt cannot be cleared in uart interrupt register (ICR). Hence further transfer over uart gets blocked. It is seen that during such deadlock condition ICR don't get cleared even on multiple write. This leads pass_counter to decrease and finally reach zero. This can be taken as trigger point to run this UART_BT_WA. Workaround backups the register configuration, does soft reset of UART using BIT-0 of PRCC_K_SOFTRST_SET/CLEAR registers and restores the registers. This patch also provides support for uart init and exit function calls if present. Signed-off-by: Shreshtha Kumar Sahu Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8dc0541..f5f6831 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -50,6 +50,7 @@ #include #include #include +#include #include #include @@ -65,6 +66,30 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) + +#define UART_WA_SAVE_NR 14 + +static void pl011_lockup_wa(unsigned long data); +static const u32 uart_wa_reg[UART_WA_SAVE_NR] = { + ST_UART011_DMAWM, + ST_UART011_TIMEOUT, + ST_UART011_LCRH_RX, + UART011_IBRD, + UART011_FBRD, + ST_UART011_LCRH_TX, + UART011_IFLS, + ST_UART011_XFCR, + ST_UART011_XON1, + ST_UART011_XON2, + ST_UART011_XOFF1, + ST_UART011_XOFF2, + UART011_CR, + UART011_IMSC +}; + +static u32 uart_wa_regdata[UART_WA_SAVE_NR]; +static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0); + /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { unsigned int ifls; @@ -72,6 +97,7 @@ struct vendor_data { unsigned int lcrh_tx; unsigned int lcrh_rx; bool oversampling; + bool interrupt_may_hang; /* vendor-specific */ bool dma_threshold; }; @@ -90,9 +116,12 @@ static struct vendor_data vendor_st = { .lcrh_tx = ST_UART011_LCRH_TX, .lcrh_rx = ST_UART011_LCRH_RX, .oversampling = true, + .interrupt_may_hang = true, .dma_threshold = true, }; +static struct uart_amba_port *amba_ports[UART_NR]; + /* Deals with DMA transactions */ struct pl011_sgbuf { @@ -132,6 +161,7 @@ struct uart_amba_port { unsigned int lcrh_rx; /* vendor-specific */ bool autorts; char type[12]; + bool interrupt_may_hang; /* vendor-specific */ #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ bool using_tx_dma; @@ -1008,6 +1038,68 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) #endif +/* + * pl011_lockup_wa + * This workaround aims to break the deadlock situation + * when after long transfer over uart in hardware flow + * control, uart interrupt registers cannot be cleared. + * Hence uart transfer gets blocked. + * + * It is seen that during such deadlock condition ICR + * don't get cleared even on multiple write. This leads + * pass_counter to decrease and finally reach zero. This + * can be taken as trigger point to run this UART_BT_WA. + * + */ +static void pl011_lockup_wa(unsigned long data) +{ + struct uart_amba_port *uap = amba_ports[0]; + void __iomem *base = uap->port.membase; + struct circ_buf *xmit = &uap->port.state->xmit; + struct tty_struct *tty = uap->port.state->port.tty; + int buf_empty_retries = 200; + int loop; + + /* Stop HCI layer from submitting data for tx */ + tty->hw_stopped = 1; + while (!uart_circ_empty(xmit)) { + if (buf_empty_retries-- == 0) + break; + udelay(100); + } + + /* Backup registers */ + for (loop = 0; loop < UART_WA_SAVE_NR; loop++) + uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]); + + /* Disable UART so that FIFO data is flushed out */ + writew(0x00, uap->port.membase + UART011_CR); + + /* Soft reset UART module */ + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->reset) + plat->reset(); + } + + /* Restore registers */ + for (loop = 0; loop < UART_WA_SAVE_NR; loop++) + writew(uart_wa_regdata[loop] , + uap->port.membase + uart_wa_reg[loop]); + + /* Initialise the old status of the modem signals */ + uap->old_status = readw(uap->port.membase + UART01x_FR) & + UART01x_FR_MODEM_ANY; + + if (readl(base + UART011_MIS) & 0x2) + printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n"); + + /* Start Tx/Rx */ + tty->hw_stopped = 0; +} + static void pl011_stop_tx(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -1158,8 +1250,11 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (status & UART011_TXIS) pl011_tx_chars(uap); - if (pass_counter-- == 0) + if (pass_counter-- == 0) { + if (uap->interrupt_may_hang) + tasklet_schedule(&pl011_lockup_tlet); break; + } status = readw(uap->port.membase + UART011_MIS); } while (status != 0); @@ -1339,6 +1434,14 @@ static int pl011_startup(struct uart_port *port) writew(uap->im, uap->port.membase + UART011_IMSC); spin_unlock_irq(&uap->port.lock); + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->init) + plat->init(); + } + return 0; clk_dis: @@ -1394,6 +1497,15 @@ static void pl011_shutdown(struct uart_port *port) * Shut down the clock producer */ clk_disable(uap->clk); + + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->exit) + plat->exit(); + } + } static void @@ -1700,6 +1812,14 @@ static int __init pl011_console_setup(struct console *co, char *options) if (!uap) return -ENODEV; + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->init) + plat->init(); + } + uap->port.uartclk = clk_get_rate(uap->clk); if (options) @@ -1774,6 +1894,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; uap->fifosize = vendor->fifosize; + uap->interrupt_may_hang = vendor->interrupt_may_hang; uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 5479fdc..514ed45 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -201,6 +201,9 @@ struct amba_pl011_data { bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; + void (*init) (void); + void (*exit) (void); + void (*reset) (void); }; #endif -- cgit v0.10.2 From 1a7d4369b3fe1f8e5efe7f11a1c482055693852f Mon Sep 17 00:00:00 2001 From: Shreshtha Kumar Sahu Date: Mon, 13 Jun 2011 10:11:44 +0200 Subject: amba pl011: platform data for reg lockup and glitch v2 This patch provides platform data for following - uart reset function to assist uart register lockup workaround - init/exit function to fix glitch in the tx pin in tty_open when tty port0 is opened a glitch is seen in the tx line of uart0. This happens in pl011_startup() when tx fifo interrupt is provoked into asserting. Now uart0 pins are enabled (alt function) only when init is complete and turned back to gpio when closed. Signed-off-by: Shreshtha Kumar Sahu Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index fd4cf1c..70cdbd6 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -110,10 +110,18 @@ static pin_cfg_t mop500_pins_common[] = { GPIO168_KP_O0, /* UART */ - GPIO0_U0_CTSn | PIN_INPUT_PULLUP, - GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, - GPIO2_U0_RXD | PIN_INPUT_PULLUP, - GPIO3_U0_TXD | PIN_OUTPUT_HIGH, + /* uart-0 pins gpio configuration should be + * kept intact to prevent glitch in tx line + * when tty dev is opened. Later these pins + * are configured to uart mop500_pins_uart0 + * + * It will be replaced with uart configuration + * once the issue is solved. + */ + GPIO0_GPIO | PIN_INPUT_PULLUP, + GPIO1_GPIO | PIN_OUTPUT_HIGH, + GPIO2_GPIO | PIN_INPUT_PULLUP, + GPIO3_GPIO | PIN_OUTPUT_HIGH, GPIO29_U2_RXD | PIN_INPUT_PULLUP, GPIO30_U2_TXD | PIN_OUTPUT_HIGH, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb26f40..2a08c07 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -27,18 +27,21 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include #include +#include "pins-db8500.h" #include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "board-mop500.h" @@ -393,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif + +static pin_cfg_t mop500_pins_uart0[] = { + GPIO0_U0_CTSn | PIN_INPUT_PULLUP, + GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, + GPIO2_U0_RXD | PIN_INPUT_PULLUP, + GPIO3_U0_TXD | PIN_OUTPUT_HIGH, +}; + +#define PRCC_K_SOFTRST_SET 0x18 +#define PRCC_K_SOFTRST_CLEAR 0x1C +static void ux500_uart0_reset(void) +{ + void __iomem *prcc_rst_set, *prcc_rst_clr; + + prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_SET); + prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_CLEAR); + + /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ + writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); + udelay(1); + + /* Release soft reset PRCC_K_SOFTRST_SET */ + writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); + udelay(1); +} + +static void ux500_uart0_init(void) +{ + int ret; + + ret = nmk_config_pins(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_enable failed\n"); +} + +static void ux500_uart0_exit(void) +{ + int ret; + + ret = nmk_config_pins_sleep(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_disable failed\n"); +} + static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif + .init = ux500_uart0_init, + .exit = ux500_uart0_exit, + .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { -- cgit v0.10.2 From 3bc46b312b1486b1fe2db4246a34a30160d26d8d Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Fri, 10 Jun 2011 23:17:58 +0200 Subject: serial: bcm63xx_uart: fix irq storm after rx fifo overrun. RX fifo reset is required to clear irq. Signed-off-by: Maxime Bizon Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index a1a0e55..c0b68b9 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -250,6 +250,20 @@ static void bcm_uart_do_rx(struct uart_port *port) /* get overrun/fifo empty information from ier * register */ iestat = bcm_uart_readl(port, UART_IR_REG); + + if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { + unsigned int val; + + /* fifo reset is required to clear + * interrupt */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) break; @@ -284,10 +298,6 @@ static void bcm_uart_do_rx(struct uart_port *port) if (uart_handle_sysrq_char(port, c)) continue; - if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } if ((cstat & port->ignore_status_mask) == 0) tty_insert_flip_char(tty, c, flag); -- cgit v0.10.2 From 0ec5258d68c626922d92e2f0e4e5c689e5360a5d Mon Sep 17 00:00:00 2001 From: Torsten Schenk Date: Thu, 16 Jun 2011 21:06:27 +0200 Subject: ALSA: 6fire - Fix signedness bug Fixed remaining issues of the signedness bug discovered by Dan Carpenter. A check was remaining that tests if unsigned rt->rate is >= 0. Changed that so that rt->rate now consistently uses ARRAY_SIZE(rates) as invalid rate value and not -1. Signed-off-by: Torsten Schenk Signed-off-by: Takashi Iwai diff --git a/sound/usb/6fire/pcm.c b/sound/usb/6fire/pcm.c index b137b25..d144cdb 100644 --- a/sound/usb/6fire/pcm.c +++ b/sound/usb/6fire/pcm.c @@ -395,12 +395,12 @@ static int usb6fire_pcm_open(struct snd_pcm_substream *alsa_sub) alsa_rt->hw = pcm_hw; if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) { - if (rt->rate >= 0) + if (rt->rate < ARRAY_SIZE(rates)) alsa_rt->hw.rates = rates_alsaid[rt->rate]; alsa_rt->hw.channels_max = OUT_N_CHANNELS; sub = &rt->playback; } else if (alsa_sub->stream == SNDRV_PCM_STREAM_CAPTURE) { - if (rt->rate >= 0) + if (rt->rate < ARRAY_SIZE(rates)) alsa_rt->hw.rates = rates_alsaid[rt->rate]; alsa_rt->hw.channels_max = IN_N_CHANNELS; sub = &rt->capture; -- cgit v0.10.2 From 46a310b80bc2c9ccc019649c9da91194cbc10944 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Jun 2011 15:36:38 -0400 Subject: [CPUFREQ] Don't set stat->last_index to -1 if the pol->cur has incorrect value. If the driver submitted an non-existing pol>cur value (say it used the default initialized value of zero), when the cpufreq stats tries to setup its initial values it incorrectly sets stat->last_index to -1 (or 0xfffff...). And cpufreq_stats_update tries to update at that index location and fails. This can be caused by: stat->last_index = freq_table_get_index(stat, policy->cur); not finding the appropiate frequency in the table (b/c the policy->cur is wrong) and we end up crashing. The fix however is concentrated in the 'cpufreq_stats_update' as the last_index (and old_index) are updated there. Which means it can reset the last_index to -1 again and on the next iteration cause a crash. Without this patch, the following crash is observed: powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0x2 (1000 MHz), vid 0x12 powernow-k8: fid 0xa (1800 MHz), vid 0xa powernow-k8: fid 0xc (2000 MHz), vid 0x8 powernow-k8: fid 0xe (2200 MHz), vid 0x8 Marking TSC unstable due to cpufreq changes powernow-k8: fid trans failed, fid 0x2, curr 0x0 BUG: unable to handle kernel paging request at ffff880807e07b78 IP: [] cpufreq_stats_update+0x46/0x5b .. snip.. Pid: 1, comm: swapper Not tainted 3.0.0-rc2 #45 MICRO-STAR INTERNATIONAL CO., LTD MS-7094/MS-7094 ..snip.. Call Trace: [] cpufreq_stat_notifier_trans+0x48/0x7c [] notifier_call_chain+0x32/0x5e [] __srcu_notifier_call_chain+0x47/0x63 [] srcu_notifier_call_chain+0xf/0x11 [] cpufreq_notify_transition+0x111/0x134 [] powernowk8_target+0x53b/0x617 [] __cpufreq_driver_target+0x2e/0x30 [] cpufreq_governor_dbs+0x339/0x356 [] __cpufreq_governor+0xa8/0xe9 [] __cpufreq_set_policy+0x132/0x13e [] cpufreq_add_dev_interface+0x272/0x28c Reported-by: Tobias Diedrich Tested-by: Tobias Diedrich Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 853f92d..faf7c52 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -298,11 +298,13 @@ static int cpufreq_stat_notifier_trans(struct notifier_block *nb, old_index = stat->last_index; new_index = freq_table_get_index(stat, freq->new); - cpufreq_stats_update(freq->cpu); - if (old_index == new_index) + /* We can't do stat->time_in_state[-1]= .. */ + if (old_index == -1 || new_index == -1) return 0; - if (old_index == -1 || new_index == -1) + cpufreq_stats_update(freq->cpu); + + if (old_index == new_index) return 0; spin_lock(&cpufreq_stats_lock); -- cgit v0.10.2 From a9d3d2068064b7a6395871a49616d3784f802d50 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Jun 2011 15:36:39 -0400 Subject: [CPUFREQ] powernow-k8: Don't notify of successful transition if we failed (vid case). Before this patch if we failed the vid transition would still try to submit the "new" frequencies to cpufreq. That is incorrect - also we could submit a non-existing frequency value which would cause cpufreq to crash. The ultimate fix is in cpufreq to deal with incorrect values, but this patch improves the error recovery in the AMD powernowk8 driver. The failure that was reported was as follows: powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0x2 (1000 MHz), vid 0x12 powernow-k8: fid 0xa (1800 MHz), vid 0xa powernow-k8: fid 0xc (2000 MHz), vid 0x8 powernow-k8: fid 0xe (2200 MHz), vid 0x8 Marking TSC unstable due to cpufreq changes powernow-k8: fid trans failed, fid 0x2, curr 0x0 BUG: unable to handle kernel paging request at ffff880807e07b78 IP: [] cpufreq_stats_update+0x46/0x5b ... And transition fails and data->currfid ends up with 0. Since the machine does not support 800Mhz value when the calculation is done ('find_khz_freq_from_fid(data->currfid);') it reports the new frequency as 800000 which is bogus. This patch fixes the issue during target setting. The patch however does not fix the issue in 'powernowk8_cpu_init' where the pol->cur can also be set with the 800000 value: pol->cur = find_khz_freq_from_fid(data->currfid); dprintk("policy current frequency %d kHz\n", pol->cur); /* min/max the cpu is capable of */ if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { The fix for that looks to update cpufreq_frequency_table_cpuinfo to check pol->cur.... but that would cause an regression in how the acpi-cpufreq driver works (it sets cpu->cur after calling cpufreq_frequency_table_cpuinfo). Instead the fix will be to let cpufreq gracefully handle bogus data (another patch). Acked-by: Borislav Petkov CC: andre.przywara@amd.com CC: Mark.Langsdorf@amd.com Reported-by: Tobias Diedrich Tested-by: Tobias Diedrich [v1: Rebased on v3.0-rc2, reduced patch to deal with vid case] Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index 83479b6..287c56f 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -1079,6 +1079,9 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, } res = transition_fid_vid(data, fid, vid); + if (res) + return res; + freqs.new = find_khz_freq_from_fid(data->currfid); for_each_cpu(i, data->available_cores) { -- cgit v0.10.2 From fbb5b89eabea5ae7d621b7861863159560d8faa4 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Jun 2011 15:36:40 -0400 Subject: [CPUFREQ] powernow-k8: Don't try to transition if the pstate is incorrect This patch augments the pstate transition code to error out (instead of returning 0) when an incorrect pstate is provided. Suggested-by: Borislav Petkov CC: andre.przywara@amd.com CC: Mark.Langsdorf@amd.com Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index 287c56f..bce576d 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -1104,7 +1104,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, /* get MSR index for hardware pstate transition */ pstate = index & HW_PSTATE_MASK; if (pstate > data->max_hw_pstate) - return 0; + return -EINVAL; + freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); -- cgit v0.10.2 From f8b7fc6b514f34a51875dd48dff70d4d17a54f38 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 16 Jun 2011 08:26:32 -0700 Subject: rcu: Move RCU_BOOST #ifdefs to header file The commit "use softirq instead of kthreads except when RCU_BOOST=y" just applied #ifdef in place. This commit is a cleanup that moves the newly #ifdef'ed code to the header file kernel/rcutree_plugin.h. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 429d494..7e59ffb 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1093,16 +1093,8 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) int need_report = 0; struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu); struct rcu_node *rnp; -#ifdef CONFIG_RCU_BOOST - struct task_struct *t; - /* Stop the CPU's kthread. */ - t = per_cpu(rcu_cpu_kthread_task, cpu); - if (t != NULL) { - per_cpu(rcu_cpu_kthread_task, cpu) = NULL; - kthread_stop(t); - } -#endif /* #ifdef CONFIG_RCU_BOOST */ + rcu_stop_cpu_kthread(cpu); /* Exclude any attempts to start a new grace period. */ raw_spin_lock_irqsave(&rsp->onofflock, flags); @@ -1453,17 +1445,6 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) invoke_rcu_callbacks(rsp, rdp); } -#ifdef CONFIG_RCU_BOOST - -static void rcu_kthread_do_work(void) -{ - rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data)); - rcu_do_batch(&rcu_bh_state, &__get_cpu_var(rcu_bh_data)); - rcu_preempt_do_callbacks(); -} - -#endif /* #ifdef CONFIG_RCU_BOOST */ - /* * Do softirq processing for the current CPU. */ @@ -1498,345 +1479,6 @@ static void invoke_rcu_core(void) raise_softirq(RCU_SOFTIRQ); } -#ifdef CONFIG_RCU_BOOST - -/* - * Wake up the specified per-rcu_node-structure kthread. - * Because the per-rcu_node kthreads are immortal, we don't need - * to do anything to keep them alive. - */ -static void invoke_rcu_node_kthread(struct rcu_node *rnp) -{ - struct task_struct *t; - - t = rnp->node_kthread_task; - if (t != NULL) - wake_up_process(t); -} - -/* - * Set the specified CPU's kthread to run RT or not, as specified by - * the to_rt argument. The CPU-hotplug locks are held, so the task - * is not going away. - */ -static void rcu_cpu_kthread_setrt(int cpu, int to_rt) -{ - int policy; - struct sched_param sp; - struct task_struct *t; - - t = per_cpu(rcu_cpu_kthread_task, cpu); - if (t == NULL) - return; - if (to_rt) { - policy = SCHED_FIFO; - sp.sched_priority = RCU_KTHREAD_PRIO; - } else { - policy = SCHED_NORMAL; - sp.sched_priority = 0; - } - sched_setscheduler_nocheck(t, policy, &sp); -} - -/* - * Timer handler to initiate the waking up of per-CPU kthreads that - * have yielded the CPU due to excess numbers of RCU callbacks. - * We wake up the per-rcu_node kthread, which in turn will wake up - * the booster kthread. - */ -static void rcu_cpu_kthread_timer(unsigned long arg) -{ - struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg); - struct rcu_node *rnp = rdp->mynode; - - atomic_or(rdp->grpmask, &rnp->wakemask); - invoke_rcu_node_kthread(rnp); -} - -/* - * Drop to non-real-time priority and yield, but only after posting a - * timer that will cause us to regain our real-time priority if we - * remain preempted. Either way, we restore our real-time priority - * before returning. - */ -static void rcu_yield(void (*f)(unsigned long), unsigned long arg) -{ - struct sched_param sp; - struct timer_list yield_timer; - - setup_timer_on_stack(&yield_timer, f, arg); - mod_timer(&yield_timer, jiffies + 2); - sp.sched_priority = 0; - sched_setscheduler_nocheck(current, SCHED_NORMAL, &sp); - set_user_nice(current, 19); - schedule(); - sp.sched_priority = RCU_KTHREAD_PRIO; - sched_setscheduler_nocheck(current, SCHED_FIFO, &sp); - del_timer(&yield_timer); -} - -/* - * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU. - * This can happen while the corresponding CPU is either coming online - * or going offline. We cannot wait until the CPU is fully online - * before starting the kthread, because the various notifier functions - * can wait for RCU grace periods. So we park rcu_cpu_kthread() until - * the corresponding CPU is online. - * - * Return 1 if the kthread needs to stop, 0 otherwise. - * - * Caller must disable bh. This function can momentarily enable it. - */ -static int rcu_cpu_kthread_should_stop(int cpu) -{ - while (cpu_is_offline(cpu) || - !cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)) || - smp_processor_id() != cpu) { - if (kthread_should_stop()) - return 1; - per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU; - per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id(); - local_bh_enable(); - schedule_timeout_uninterruptible(1); - if (!cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu))) - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - local_bh_disable(); - } - per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu; - return 0; -} - -/* - * Per-CPU kernel thread that invokes RCU callbacks. This replaces the - * earlier RCU softirq. - */ -static int rcu_cpu_kthread(void *arg) -{ - int cpu = (int)(long)arg; - unsigned long flags; - int spincnt = 0; - unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu); - char work; - char *workp = &per_cpu(rcu_cpu_has_work, cpu); - - for (;;) { - *statusp = RCU_KTHREAD_WAITING; - rcu_wait(*workp != 0 || kthread_should_stop()); - local_bh_disable(); - if (rcu_cpu_kthread_should_stop(cpu)) { - local_bh_enable(); - break; - } - *statusp = RCU_KTHREAD_RUNNING; - per_cpu(rcu_cpu_kthread_loops, cpu)++; - local_irq_save(flags); - work = *workp; - *workp = 0; - local_irq_restore(flags); - if (work) - rcu_kthread_do_work(); - local_bh_enable(); - if (*workp != 0) - spincnt++; - else - spincnt = 0; - if (spincnt > 10) { - *statusp = RCU_KTHREAD_YIELDING; - rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu); - spincnt = 0; - } - } - *statusp = RCU_KTHREAD_STOPPED; - return 0; -} - -/* - * Spawn a per-CPU kthread, setting up affinity and priority. - * Because the CPU hotplug lock is held, no other CPU will be attempting - * to manipulate rcu_cpu_kthread_task. There might be another CPU - * attempting to access it during boot, but the locking in kthread_bind() - * will enforce sufficient ordering. - * - * Please note that we cannot simply refuse to wake up the per-CPU - * kthread because kthreads are created in TASK_UNINTERRUPTIBLE state, - * which can result in softlockup complaints if the task ends up being - * idle for more than a couple of minutes. - * - * However, please note also that we cannot bind the per-CPU kthread to its - * CPU until that CPU is fully online. We also cannot wait until the - * CPU is fully online before we create its per-CPU kthread, as this would - * deadlock the system when CPU notifiers tried waiting for grace - * periods. So we bind the per-CPU kthread to its CPU only if the CPU - * is online. If its CPU is not yet fully online, then the code in - * rcu_cpu_kthread() will wait until it is fully online, and then do - * the binding. - */ -static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu) -{ - struct sched_param sp; - struct task_struct *t; - - if (!rcu_kthreads_spawnable || - per_cpu(rcu_cpu_kthread_task, cpu) != NULL) - return 0; - t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu); - if (IS_ERR(t)) - return PTR_ERR(t); - if (cpu_online(cpu)) - kthread_bind(t, cpu); - per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu; - WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL); - sp.sched_priority = RCU_KTHREAD_PRIO; - sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); - per_cpu(rcu_cpu_kthread_task, cpu) = t; - wake_up_process(t); /* Get to TASK_INTERRUPTIBLE quickly. */ - return 0; -} - -/* - * Per-rcu_node kthread, which is in charge of waking up the per-CPU - * kthreads when needed. We ignore requests to wake up kthreads - * for offline CPUs, which is OK because force_quiescent_state() - * takes care of this case. - */ -static int rcu_node_kthread(void *arg) -{ - int cpu; - unsigned long flags; - unsigned long mask; - struct rcu_node *rnp = (struct rcu_node *)arg; - struct sched_param sp; - struct task_struct *t; - - for (;;) { - rnp->node_kthread_status = RCU_KTHREAD_WAITING; - rcu_wait(atomic_read(&rnp->wakemask) != 0); - rnp->node_kthread_status = RCU_KTHREAD_RUNNING; - raw_spin_lock_irqsave(&rnp->lock, flags); - mask = atomic_xchg(&rnp->wakemask, 0); - rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */ - for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) { - if ((mask & 0x1) == 0) - continue; - preempt_disable(); - t = per_cpu(rcu_cpu_kthread_task, cpu); - if (!cpu_online(cpu) || t == NULL) { - preempt_enable(); - continue; - } - per_cpu(rcu_cpu_has_work, cpu) = 1; - sp.sched_priority = RCU_KTHREAD_PRIO; - sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); - preempt_enable(); - } - } - /* NOTREACHED */ - rnp->node_kthread_status = RCU_KTHREAD_STOPPED; - return 0; -} - -/* - * Set the per-rcu_node kthread's affinity to cover all CPUs that are - * served by the rcu_node in question. The CPU hotplug lock is still - * held, so the value of rnp->qsmaskinit will be stable. - * - * We don't include outgoingcpu in the affinity set, use -1 if there is - * no outgoing CPU. If there are no CPUs left in the affinity set, - * this function allows the kthread to execute on any CPU. - */ -static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu) -{ - cpumask_var_t cm; - int cpu; - unsigned long mask = rnp->qsmaskinit; - - if (rnp->node_kthread_task == NULL) - return; - if (!alloc_cpumask_var(&cm, GFP_KERNEL)) - return; - cpumask_clear(cm); - for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) - if ((mask & 0x1) && cpu != outgoingcpu) - cpumask_set_cpu(cpu, cm); - if (cpumask_weight(cm) == 0) { - cpumask_setall(cm); - for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++) - cpumask_clear_cpu(cpu, cm); - WARN_ON_ONCE(cpumask_weight(cm) == 0); - } - set_cpus_allowed_ptr(rnp->node_kthread_task, cm); - rcu_boost_kthread_setaffinity(rnp, cm); - free_cpumask_var(cm); -} - -/* - * Spawn a per-rcu_node kthread, setting priority and affinity. - * Called during boot before online/offline can happen, or, if - * during runtime, with the main CPU-hotplug locks held. So only - * one of these can be executing at a time. - */ -static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp, - struct rcu_node *rnp) -{ - unsigned long flags; - int rnp_index = rnp - &rsp->node[0]; - struct sched_param sp; - struct task_struct *t; - - if (!rcu_kthreads_spawnable || - rnp->qsmaskinit == 0) - return 0; - if (rnp->node_kthread_task == NULL) { - t = kthread_create(rcu_node_kthread, (void *)rnp, - "rcun%d", rnp_index); - if (IS_ERR(t)) - return PTR_ERR(t); - raw_spin_lock_irqsave(&rnp->lock, flags); - rnp->node_kthread_task = t; - raw_spin_unlock_irqrestore(&rnp->lock, flags); - sp.sched_priority = 99; - sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); - wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */ - } - return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index); -} - -/* - * Spawn all kthreads -- called as soon as the scheduler is running. - */ -static int __init rcu_spawn_kthreads(void) -{ - int cpu; - struct rcu_node *rnp; - - rcu_kthreads_spawnable = 1; - for_each_possible_cpu(cpu) { - per_cpu(rcu_cpu_has_work, cpu) = 0; - if (cpu_online(cpu)) - (void)rcu_spawn_one_cpu_kthread(cpu); - } - rnp = rcu_get_root(rcu_state); - (void)rcu_spawn_one_node_kthread(rcu_state, rnp); - if (NUM_RCU_NODES > 1) { - rcu_for_each_leaf_node(rcu_state, rnp) - (void)rcu_spawn_one_node_kthread(rcu_state, rnp); - } - return 0; -} -early_initcall(rcu_spawn_kthreads); - -#else /* #ifdef CONFIG_RCU_BOOST */ - -static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu) -{ -} - -static void rcu_cpu_kthread_setrt(int cpu, int to_rt) -{ -} - -#endif /* #else #ifdef CONFIG_RCU_BOOST */ - static void __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), struct rcu_state *rsp) @@ -2243,29 +1885,6 @@ static void __cpuinit rcu_prepare_cpu(int cpu) rcu_preempt_init_percpu_data(cpu); } -#ifdef CONFIG_RCU_BOOST - -static void __cpuinit rcu_prepare_kthreads(int cpu) -{ - struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu); - struct rcu_node *rnp = rdp->mynode; - - /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */ - if (rcu_kthreads_spawnable) { - (void)rcu_spawn_one_cpu_kthread(cpu); - if (rnp->node_kthread_task == NULL) - (void)rcu_spawn_one_node_kthread(rcu_state, rnp); - } -} - -#else /* #ifdef CONFIG_RCU_BOOST */ - -static void __cpuinit rcu_prepare_kthreads(int cpu) -{ -} - -#endif /* #else #ifdef CONFIG_RCU_BOOST */ - /* * Handle CPU online/offline notification events. */ diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 434288c..01b2ccd 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -427,6 +427,7 @@ static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp); #ifdef CONFIG_HOTPLUG_CPU static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags); +static void rcu_stop_cpu_kthread(int cpu); #endif /* #ifdef CONFIG_HOTPLUG_CPU */ static void rcu_print_detail_task_stall(struct rcu_state *rsp); static void rcu_print_task_stall(struct rcu_node *rnp); @@ -460,6 +461,10 @@ static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, struct rcu_node *rnp, int rnp_index); +static void invoke_rcu_node_kthread(struct rcu_node *rnp); +static void rcu_yield(void (*f)(unsigned long), unsigned long arg); #endif /* #ifdef CONFIG_RCU_BOOST */ +static void rcu_cpu_kthread_setrt(int cpu, int to_rt); +static void __cpuinit rcu_prepare_kthreads(int cpu); #endif /* #ifndef RCU_TREE_NONCORE */ diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 2772386..14dc7dd 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1330,6 +1330,370 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, return 0; } +#ifdef CONFIG_HOTPLUG_CPU + +/* + * Stop the RCU's per-CPU kthread when its CPU goes offline,. + */ +static void rcu_stop_cpu_kthread(int cpu) +{ + struct task_struct *t; + + /* Stop the CPU's kthread. */ + t = per_cpu(rcu_cpu_kthread_task, cpu); + if (t != NULL) { + per_cpu(rcu_cpu_kthread_task, cpu) = NULL; + kthread_stop(t); + } +} + +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ + +static void rcu_kthread_do_work(void) +{ + rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data)); + rcu_do_batch(&rcu_bh_state, &__get_cpu_var(rcu_bh_data)); + rcu_preempt_do_callbacks(); +} + +/* + * Wake up the specified per-rcu_node-structure kthread. + * Because the per-rcu_node kthreads are immortal, we don't need + * to do anything to keep them alive. + */ +static void invoke_rcu_node_kthread(struct rcu_node *rnp) +{ + struct task_struct *t; + + t = rnp->node_kthread_task; + if (t != NULL) + wake_up_process(t); +} + +/* + * Set the specified CPU's kthread to run RT or not, as specified by + * the to_rt argument. The CPU-hotplug locks are held, so the task + * is not going away. + */ +static void rcu_cpu_kthread_setrt(int cpu, int to_rt) +{ + int policy; + struct sched_param sp; + struct task_struct *t; + + t = per_cpu(rcu_cpu_kthread_task, cpu); + if (t == NULL) + return; + if (to_rt) { + policy = SCHED_FIFO; + sp.sched_priority = RCU_KTHREAD_PRIO; + } else { + policy = SCHED_NORMAL; + sp.sched_priority = 0; + } + sched_setscheduler_nocheck(t, policy, &sp); +} + +/* + * Timer handler to initiate the waking up of per-CPU kthreads that + * have yielded the CPU due to excess numbers of RCU callbacks. + * We wake up the per-rcu_node kthread, which in turn will wake up + * the booster kthread. + */ +static void rcu_cpu_kthread_timer(unsigned long arg) +{ + struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg); + struct rcu_node *rnp = rdp->mynode; + + atomic_or(rdp->grpmask, &rnp->wakemask); + invoke_rcu_node_kthread(rnp); +} + +/* + * Drop to non-real-time priority and yield, but only after posting a + * timer that will cause us to regain our real-time priority if we + * remain preempted. Either way, we restore our real-time priority + * before returning. + */ +static void rcu_yield(void (*f)(unsigned long), unsigned long arg) +{ + struct sched_param sp; + struct timer_list yield_timer; + + setup_timer_on_stack(&yield_timer, f, arg); + mod_timer(&yield_timer, jiffies + 2); + sp.sched_priority = 0; + sched_setscheduler_nocheck(current, SCHED_NORMAL, &sp); + set_user_nice(current, 19); + schedule(); + sp.sched_priority = RCU_KTHREAD_PRIO; + sched_setscheduler_nocheck(current, SCHED_FIFO, &sp); + del_timer(&yield_timer); +} + +/* + * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU. + * This can happen while the corresponding CPU is either coming online + * or going offline. We cannot wait until the CPU is fully online + * before starting the kthread, because the various notifier functions + * can wait for RCU grace periods. So we park rcu_cpu_kthread() until + * the corresponding CPU is online. + * + * Return 1 if the kthread needs to stop, 0 otherwise. + * + * Caller must disable bh. This function can momentarily enable it. + */ +static int rcu_cpu_kthread_should_stop(int cpu) +{ + while (cpu_is_offline(cpu) || + !cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)) || + smp_processor_id() != cpu) { + if (kthread_should_stop()) + return 1; + per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU; + per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id(); + local_bh_enable(); + schedule_timeout_uninterruptible(1); + if (!cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu))) + set_cpus_allowed_ptr(current, cpumask_of(cpu)); + local_bh_disable(); + } + per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu; + return 0; +} + +/* + * Per-CPU kernel thread that invokes RCU callbacks. This replaces the + * earlier RCU softirq. + */ +static int rcu_cpu_kthread(void *arg) +{ + int cpu = (int)(long)arg; + unsigned long flags; + int spincnt = 0; + unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu); + char work; + char *workp = &per_cpu(rcu_cpu_has_work, cpu); + + for (;;) { + *statusp = RCU_KTHREAD_WAITING; + rcu_wait(*workp != 0 || kthread_should_stop()); + local_bh_disable(); + if (rcu_cpu_kthread_should_stop(cpu)) { + local_bh_enable(); + break; + } + *statusp = RCU_KTHREAD_RUNNING; + per_cpu(rcu_cpu_kthread_loops, cpu)++; + local_irq_save(flags); + work = *workp; + *workp = 0; + local_irq_restore(flags); + if (work) + rcu_kthread_do_work(); + local_bh_enable(); + if (*workp != 0) + spincnt++; + else + spincnt = 0; + if (spincnt > 10) { + *statusp = RCU_KTHREAD_YIELDING; + rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu); + spincnt = 0; + } + } + *statusp = RCU_KTHREAD_STOPPED; + return 0; +} + +/* + * Spawn a per-CPU kthread, setting up affinity and priority. + * Because the CPU hotplug lock is held, no other CPU will be attempting + * to manipulate rcu_cpu_kthread_task. There might be another CPU + * attempting to access it during boot, but the locking in kthread_bind() + * will enforce sufficient ordering. + * + * Please note that we cannot simply refuse to wake up the per-CPU + * kthread because kthreads are created in TASK_UNINTERRUPTIBLE state, + * which can result in softlockup complaints if the task ends up being + * idle for more than a couple of minutes. + * + * However, please note also that we cannot bind the per-CPU kthread to its + * CPU until that CPU is fully online. We also cannot wait until the + * CPU is fully online before we create its per-CPU kthread, as this would + * deadlock the system when CPU notifiers tried waiting for grace + * periods. So we bind the per-CPU kthread to its CPU only if the CPU + * is online. If its CPU is not yet fully online, then the code in + * rcu_cpu_kthread() will wait until it is fully online, and then do + * the binding. + */ +static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu) +{ + struct sched_param sp; + struct task_struct *t; + + if (!rcu_kthreads_spawnable || + per_cpu(rcu_cpu_kthread_task, cpu) != NULL) + return 0; + t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu); + if (IS_ERR(t)) + return PTR_ERR(t); + if (cpu_online(cpu)) + kthread_bind(t, cpu); + per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu; + WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL); + sp.sched_priority = RCU_KTHREAD_PRIO; + sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); + per_cpu(rcu_cpu_kthread_task, cpu) = t; + wake_up_process(t); /* Get to TASK_INTERRUPTIBLE quickly. */ + return 0; +} + +/* + * Per-rcu_node kthread, which is in charge of waking up the per-CPU + * kthreads when needed. We ignore requests to wake up kthreads + * for offline CPUs, which is OK because force_quiescent_state() + * takes care of this case. + */ +static int rcu_node_kthread(void *arg) +{ + int cpu; + unsigned long flags; + unsigned long mask; + struct rcu_node *rnp = (struct rcu_node *)arg; + struct sched_param sp; + struct task_struct *t; + + for (;;) { + rnp->node_kthread_status = RCU_KTHREAD_WAITING; + rcu_wait(atomic_read(&rnp->wakemask) != 0); + rnp->node_kthread_status = RCU_KTHREAD_RUNNING; + raw_spin_lock_irqsave(&rnp->lock, flags); + mask = atomic_xchg(&rnp->wakemask, 0); + rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */ + for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) { + if ((mask & 0x1) == 0) + continue; + preempt_disable(); + t = per_cpu(rcu_cpu_kthread_task, cpu); + if (!cpu_online(cpu) || t == NULL) { + preempt_enable(); + continue; + } + per_cpu(rcu_cpu_has_work, cpu) = 1; + sp.sched_priority = RCU_KTHREAD_PRIO; + sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); + preempt_enable(); + } + } + /* NOTREACHED */ + rnp->node_kthread_status = RCU_KTHREAD_STOPPED; + return 0; +} + +/* + * Set the per-rcu_node kthread's affinity to cover all CPUs that are + * served by the rcu_node in question. The CPU hotplug lock is still + * held, so the value of rnp->qsmaskinit will be stable. + * + * We don't include outgoingcpu in the affinity set, use -1 if there is + * no outgoing CPU. If there are no CPUs left in the affinity set, + * this function allows the kthread to execute on any CPU. + */ +static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu) +{ + cpumask_var_t cm; + int cpu; + unsigned long mask = rnp->qsmaskinit; + + if (rnp->node_kthread_task == NULL) + return; + if (!alloc_cpumask_var(&cm, GFP_KERNEL)) + return; + cpumask_clear(cm); + for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) + if ((mask & 0x1) && cpu != outgoingcpu) + cpumask_set_cpu(cpu, cm); + if (cpumask_weight(cm) == 0) { + cpumask_setall(cm); + for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++) + cpumask_clear_cpu(cpu, cm); + WARN_ON_ONCE(cpumask_weight(cm) == 0); + } + set_cpus_allowed_ptr(rnp->node_kthread_task, cm); + rcu_boost_kthread_setaffinity(rnp, cm); + free_cpumask_var(cm); +} + +/* + * Spawn a per-rcu_node kthread, setting priority and affinity. + * Called during boot before online/offline can happen, or, if + * during runtime, with the main CPU-hotplug locks held. So only + * one of these can be executing at a time. + */ +static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp, + struct rcu_node *rnp) +{ + unsigned long flags; + int rnp_index = rnp - &rsp->node[0]; + struct sched_param sp; + struct task_struct *t; + + if (!rcu_kthreads_spawnable || + rnp->qsmaskinit == 0) + return 0; + if (rnp->node_kthread_task == NULL) { + t = kthread_create(rcu_node_kthread, (void *)rnp, + "rcun%d", rnp_index); + if (IS_ERR(t)) + return PTR_ERR(t); + raw_spin_lock_irqsave(&rnp->lock, flags); + rnp->node_kthread_task = t; + raw_spin_unlock_irqrestore(&rnp->lock, flags); + sp.sched_priority = 99; + sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); + wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */ + } + return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index); +} + +/* + * Spawn all kthreads -- called as soon as the scheduler is running. + */ +static int __init rcu_spawn_kthreads(void) +{ + int cpu; + struct rcu_node *rnp; + + rcu_kthreads_spawnable = 1; + for_each_possible_cpu(cpu) { + per_cpu(rcu_cpu_has_work, cpu) = 0; + if (cpu_online(cpu)) + (void)rcu_spawn_one_cpu_kthread(cpu); + } + rnp = rcu_get_root(rcu_state); + (void)rcu_spawn_one_node_kthread(rcu_state, rnp); + if (NUM_RCU_NODES > 1) { + rcu_for_each_leaf_node(rcu_state, rnp) + (void)rcu_spawn_one_node_kthread(rcu_state, rnp); + } + return 0; +} +early_initcall(rcu_spawn_kthreads); + +static void __cpuinit rcu_prepare_kthreads(int cpu) +{ + struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu); + struct rcu_node *rnp = rdp->mynode; + + /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */ + if (rcu_kthreads_spawnable) { + (void)rcu_spawn_one_cpu_kthread(cpu); + if (rnp->node_kthread_task == NULL) + (void)rcu_spawn_one_node_kthread(rcu_state, rnp); + } +} + #else /* #ifdef CONFIG_RCU_BOOST */ static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) @@ -1346,6 +1710,26 @@ static void rcu_preempt_boost_start_gp(struct rcu_node *rnp) { } +#ifdef CONFIG_HOTPLUG_CPU + +static void rcu_stop_cpu_kthread(int cpu) +{ +} + +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ + +static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu) +{ +} + +static void rcu_cpu_kthread_setrt(int cpu, int to_rt) +{ +} + +static void __cpuinit rcu_prepare_kthreads(int cpu) +{ +} + #endif /* #else #ifdef CONFIG_RCU_BOOST */ #ifndef CONFIG_SMP -- cgit v0.10.2 From d40261236e8e278cb1936cb5e934262971692b10 Mon Sep 17 00:00:00 2001 From: "Marius B. Kotsbak" Date: Sun, 12 Jun 2011 02:35:02 +0000 Subject: net/usb: Add Samsung Kalmia driver for Samsung GT-B3730 Introducing driver for the network port of Samsung Kalmia based USB LTE modems. It has also an ACM interface that previous patches associates with the "option" module. To access those interfaces, the modem must first be switched from modem mode using a tool like usb_modeswitch. As the proprietary protocol has been discovered by watching the MS Windows driver behavior, there might be errors in the protocol handling, but stable and fast connection has been established for hours with Norwegian operator NetCom that distributes this modem with their LTE/4G subscription. More and updated information about how to use this driver is available here: http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465 https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver Signed-off-by: Marius B. Kotsbak Signed-off-by: David S. Miller diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 9d4f911..84d4608 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -385,6 +385,16 @@ config USB_NET_CX82310_ETH router with USB ethernet port. This driver is for routers only, it will not work with ADSL modems (use cxacru driver instead). +config USB_NET_KALMIA + tristate "Samsung Kalmia based LTE USB modem" + depends on USB_USBNET + help + Choose this option if you have a Samsung Kalmia based USB modem + as Samsung GT-B3730. + + To compile this driver as a module, choose M here: the + module will be called kalmia. + config USB_HSO tristate "Option USB High Speed Mobile Devices" depends on USB && RFKILL diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index c7ec8a5..c203fa2 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o +obj-$(CONFIG_USB_NET_KALMIA) += kalmia.o obj-$(CONFIG_USB_IPHETH) += ipheth.o obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c new file mode 100644 index 0000000..d965fb1 --- /dev/null +++ b/drivers/net/usb/kalmia.c @@ -0,0 +1,384 @@ +/* + * USB network interface driver for Samsung Kalmia based LTE USB modem like the + * Samsung GT-B3730 and GT-B3710. + * + * Copyright (C) 2011 Marius Bjoernstad Kotsbak + * + * Sponsored by Quicklink Video Distribution Services Ltd. + * + * Based on the cdc_eem module. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control + * handled by the "option" module and an ethernet data port handled by this + * module. + * + * The stick must first be switched into modem mode by usb_modeswitch + * or similar tool. Then the modem gets sent two initialization packets by + * this module, which gives the MAC address of the device. User space can then + * connect the modem using AT commands through the ACM port and then use + * DHCP on the network interface exposed by this module. Network packets are + * sent to and from the modem in a proprietary format discovered after watching + * the behavior of the windows driver for the modem. + * + * More information about the use of the modem is available in usb_modeswitch + * forum and the project page: + * + * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465 + * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver + */ + +/* #define DEBUG */ +/* #define VERBOSE */ + +#define KALMIA_HEADER_LENGTH 6 +#define KALMIA_ALIGN_SIZE 4 +#define KALMIA_USB_TIMEOUT 10000 + +/*-------------------------------------------------------------------------*/ + +static int +kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len, + u8 *buffer, u8 expected_len) +{ + int act_len; + int status; + + netdev_dbg(dev->net, "Sending init packet"); + + status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02), + init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT); + if (status != 0) { + netdev_err(dev->net, + "Error sending init packet. Status %i, length %i\n", + status, act_len); + return status; + } + else if (act_len != init_msg_len) { + netdev_err(dev->net, + "Did not send all of init packet. Bytes sent: %i", + act_len); + } + else { + netdev_dbg(dev->net, "Successfully sent init packet."); + } + + status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81), + buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT); + + if (status != 0) + netdev_err(dev->net, + "Error receiving init result. Status %i, length %i\n", + status, act_len); + else if (act_len != expected_len) + netdev_err(dev->net, "Unexpected init result length: %i\n", + act_len); + + return status; +} + +static int +kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr) +{ + char init_msg_1[] = + { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x00 }; + char init_msg_2[] = + { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4, + 0x00, 0x00 }; + char receive_buf[28]; + int status; + + status = kalmia_send_init_packet(dev, init_msg_1, sizeof(init_msg_1) + / sizeof(init_msg_1[0]), receive_buf, 24); + if (status != 0) + return status; + + status = kalmia_send_init_packet(dev, init_msg_2, sizeof(init_msg_2) + / sizeof(init_msg_2[0]), receive_buf, 28); + if (status != 0) + return status; + + memcpy(ethernet_addr, receive_buf + 10, ETH_ALEN); + + return status; +} + +static int +kalmia_bind(struct usbnet *dev, struct usb_interface *intf) +{ + u8 status; + u8 ethernet_addr[ETH_ALEN]; + + /* Don't bind to AT command interface */ + if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) + return -EINVAL; + + dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK); + dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK); + dev->status = NULL; + + dev->net->hard_header_len += KALMIA_HEADER_LENGTH; + dev->hard_mtu = 1400; + dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing + + status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr); + + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN); + memcpy(dev->net->perm_addr, ethernet_addr, ETH_ALEN); + + return status; +} + +static struct sk_buff * +kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 content_len; + unsigned char *header_start; + unsigned char ether_type_1, ether_type_2; + u8 remainder, padlen = 0; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom + >= KALMIA_HEADER_LENGTH)) + goto done; + + if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH + + KALMIA_ALIGN_SIZE)) { + skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH, + skb->data, skb->len); + skb_set_tail_pointer(skb, skb->len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH, + KALMIA_ALIGN_SIZE, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + + done: header_start = skb_push(skb, KALMIA_HEADER_LENGTH); + ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12]; + ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13]; + + netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1, + ether_type_2); + + /* According to empiric data for data packages */ + header_start[0] = 0x57; + header_start[1] = 0x44; + content_len = skb->len - KALMIA_HEADER_LENGTH; + header_start[2] = (content_len & 0xff); /* low byte */ + header_start[3] = (content_len >> 8); /* high byte */ + + header_start[4] = ether_type_1; + header_start[5] = ether_type_2; + + /* Align to 4 bytes by padding with zeros */ + remainder = skb->len % KALMIA_ALIGN_SIZE; + if (remainder > 0) { + padlen = KALMIA_ALIGN_SIZE - remainder; + memset(skb_put(skb, padlen), 0, padlen); + } + + netdev_dbg( + dev->net, + "Sending package with length %i and padding %i. Header: %02x:%02x:%02x:%02x:%02x:%02x.", + content_len, padlen, header_start[0], header_start[1], + header_start[2], header_start[3], header_start[4], + header_start[5]); + + return skb; +} + +static int +kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. + */ + const u8 HEADER_END_OF_USB_PACKET[] = + { 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 }; + const u8 EXPECTED_UNKNOWN_HEADER_1[] = + { 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 }; + const u8 EXPECTED_UNKNOWN_HEADER_2[] = + { 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 }; + u8 i = 0; + + /* incomplete header? */ + if (skb->len < KALMIA_HEADER_LENGTH) + return 0; + + do { + struct sk_buff *skb2 = NULL; + u8 *header_start; + u16 usb_packet_length, ether_packet_length; + int is_last; + + header_start = skb->data; + + if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) { + if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1, + sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp( + header_start, EXPECTED_UNKNOWN_HEADER_2, + sizeof(EXPECTED_UNKNOWN_HEADER_2))) { + netdev_dbg( + dev->net, + "Received expected unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + } + else { + netdev_err( + dev->net, + "Received unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + return 0; + } + } + else + netdev_dbg( + dev->net, + "Received header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], header_start[2], + header_start[3], header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + + /* subtract start header and end header */ + usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH); + ether_packet_length = header_start[2] + (header_start[3] << 8); + skb_pull(skb, KALMIA_HEADER_LENGTH); + + /* Some small packets misses end marker */ + if (usb_packet_length < ether_packet_length) { + ether_packet_length = usb_packet_length + + KALMIA_HEADER_LENGTH; + is_last = true; + } + else { + netdev_dbg(dev->net, "Correct package length #%i", i + + 1); + + is_last = (memcmp(skb->data + ether_packet_length, + HEADER_END_OF_USB_PACKET, + sizeof(HEADER_END_OF_USB_PACKET)) == 0); + if (!is_last) { + header_start = skb->data + ether_packet_length; + netdev_dbg( + dev->net, + "End header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + } + } + + if (is_last) { + skb2 = skb; + } + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + skb_trim(skb2, ether_packet_length); + + if (is_last) { + return 1; + } + else { + usbnet_skb_return(dev, skb2); + skb_pull(skb, ether_packet_length); + } + + i++; + } + while (skb->len); + + return 1; +} + +static const struct driver_info kalmia_info = { + .description = "Samsung Kalmia LTE USB dongle", + .flags = FLAG_WWAN, + .bind = kalmia_bind, + .rx_fixup = kalmia_rx_fixup, + .tx_fixup = kalmia_tx_fixup +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { + /* The unswitched USB ID, to get the module auto loaded: */ + { USB_DEVICE(0x04e8, 0x689a) }, + /* The stick swithed into modem (by e.g. usb_modeswitch): */ + { USB_DEVICE(0x04e8, 0x6889), + .driver_info = (unsigned long) &kalmia_info, }, + { /* EMPTY == end of list */} }; +MODULE_DEVICE_TABLE( usb, products); + +static struct usb_driver kalmia_driver = { + .name = "kalmia", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume +}; + +static int __init kalmia_init(void) +{ + return usb_register(&kalmia_driver); +} +module_init( kalmia_init); + +static void __exit kalmia_exit(void) +{ + usb_deregister(&kalmia_driver); +} +module_exit( kalmia_exit); + +MODULE_AUTHOR("Marius Bjoernstad Kotsbak "); +MODULE_DESCRIPTION("Samsung Kalmia USB network driver"); +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 62b2bcb49cca72f6d3f39f831127a6ab315a475d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fernando=20Luis=20V=C3=A1zquez=20Cao?= Date: Mon, 13 Jun 2011 15:04:43 +0000 Subject: IGMP snooping: set mrouters_only flag for IPv4 traffic properly Upon reception of a IGMP/IGMPv2 membership report the kernel sets the mrouters_only flag in a skb that may be a clone of the original skb, which means that sometimes the bridge loses track of membership report packets (cb buffers are tied to a specific skb and not shared) and it ends up forwading join requests to the bridge interface. This can cause unexpected membership timeouts and intermitent/permanent loss of connectivity as described in RFC 4541 [2.1.1. IGMP Forwarding Rules]: A snooping switch should forward IGMP Membership Reports only to those ports where multicast routers are attached. [...] Sending membership reports to other hosts can result, for IGMPv1 and IGMPv2, in unintentionally preventing a host from joining a specific multicast group. Signed-off-by: Fernando Luis Vazquez Cao Tested-by: Hayato Kakuta Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 2f14eaf..a6d87c1 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1424,7 +1424,7 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br, switch (ih->type) { case IGMP_HOST_MEMBERSHIP_REPORT: case IGMPV2_HOST_MEMBERSHIP_REPORT: - BR_INPUT_SKB_CB(skb2)->mrouters_only = 1; + BR_INPUT_SKB_CB(skb)->mrouters_only = 1; err = br_ip4_multicast_add_group(br, port, ih->group); break; case IGMPV3_HOST_MEMBERSHIP_REPORT: -- cgit v0.10.2 From fc2af6c73fc9449cd5894a36bb76b8f8c0e49fd8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Fernando=20Luis=20V=C3=A1zquez=20Cao?= Date: Mon, 13 Jun 2011 15:06:58 +0000 Subject: IGMP snooping: set mrouters_only flag for IPv6 traffic properly Upon reception of a MGM report packet the kernel sets the mrouters_only flag in a skb that is a clone of the original skb, which means that the bridge loses track of MGM packets (cb buffers are tied to a specific skb and not shared) and it ends up forwading join requests to the bridge interface. This can cause unexpected membership timeouts and intermitent/permanent loss of connectivity as described in RFC 4541 [2.1.1. IGMP Forwarding Rules]: A snooping switch should forward IGMP Membership Reports only to those ports where multicast routers are attached. [...] Sending membership reports to other hosts can result, for IGMPv1 and IGMPv2, in unintentionally preventing a host from joining a specific multicast group. Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index a6d87c1..29b9812 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1543,7 +1543,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br, goto out; } mld = (struct mld_msg *)skb_transport_header(skb2); - BR_INPUT_SKB_CB(skb2)->mrouters_only = 1; + BR_INPUT_SKB_CB(skb)->mrouters_only = 1; err = br_ip6_multicast_add_group(br, port, &mld->mld_mca); break; } -- cgit v0.10.2 From d3ab6fde14b69c346939cd00765b3826a4760e5c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 13 Jun 2011 16:26:22 +0000 Subject: MAINTAINERS: Update EBTABLES mailing list It moved to netfilter-devel@vger.kernel.org. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 6a1c430..0f1515a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2292,8 +2292,7 @@ F: drivers/scsi/eata_pio.* EBTABLES M: Bart De Schuymer -L: ebtables-user@lists.sourceforge.net -L: ebtables-devel@lists.sourceforge.net +L: netfilter-devel@vger.kernel.org W: http://ebtables.sourceforge.net/ S: Maintained F: include/linux/netfilter_bridge/ebt_*.h -- cgit v0.10.2 From e6539e2b7aee117619153daaf61566dba1e04205 Mon Sep 17 00:00:00 2001 From: Changli Gao Date: Tue, 14 Jun 2011 21:58:13 +0000 Subject: ppp: use PPP_TRANS instead of the magic number 0x20 Signed-off-by: Changli Gao Signed-off-by: David S. Miller diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index a1b82c9..c554a39 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -523,7 +523,7 @@ static void ppp_async_process(unsigned long arg) #define PUT_BYTE(ap, buf, c, islcp) do { \ if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\ *buf++ = PPP_ESCAPE; \ - *buf++ = c ^ 0x20; \ + *buf++ = c ^ PPP_TRANS; \ } else \ *buf++ = c; \ } while (0) @@ -896,7 +896,7 @@ ppp_async_input(struct asyncppp *ap, const unsigned char *buf, sp = skb_put(skb, n); memcpy(sp, buf, n); if (ap->state & SC_ESCAPE) { - sp[0] ^= 0x20; + sp[0] ^= PPP_TRANS; ap->state &= ~SC_ESCAPE; } } -- cgit v0.10.2 From f1dc045e685ea5424b3445c1ccaa0a25b3d661ec Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 14 Jun 2011 22:07:58 +0000 Subject: phylib: Allow BCM63XX PHY to be selected only on BCM63XX. This PHY is available integrated into BCM63xx series SOCs only. Signed-off-by: Ralf Baechle drivers/net/phy/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Acked-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 392a6c4..a702443 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -58,6 +58,7 @@ config BROADCOM_PHY config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" + depends on BCM63XX ---help--- Currently supports the 6348 and 6358 PHYs. -- cgit v0.10.2 From 2331038a96ecdad76c50ab223fd48d656d8a1184 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Tue, 14 Jun 2011 23:55:19 +0000 Subject: dp83640: fix phy status frame event parsing If two eternal time stamp events occur at nearly the same time, the phyter will add an extra word into the status frame. This commit fixes the parsing code to recognize and skip over the extra word. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index b0c9522..ead323e 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -543,11 +543,20 @@ static void recalibrate(struct dp83640_clock *clock) /* time stamping methods */ -static void decode_evnt(struct dp83640_private *dp83640, - struct phy_txts *phy_txts, u16 ests) +static int decode_evnt(struct dp83640_private *dp83640, + void *data, u16 ests) { + struct phy_txts *phy_txts; struct ptp_clock_event event; int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK; + u16 ext_status = 0; + + if (ests & MULT_EVNT) { + ext_status = *(u16 *) data; + data += sizeof(ext_status); + } + + phy_txts = data; switch (words) { /* fall through in every case */ case 3: @@ -565,6 +574,9 @@ static void decode_evnt(struct dp83640_private *dp83640, event.timestamp = phy2txts(&dp83640->edata); ptp_clock_event(dp83640->clock->ptp_clock, &event); + + words = ext_status ? words + 2 : words + 1; + return words * sizeof(u16); } static void decode_rxts(struct dp83640_private *dp83640, @@ -643,9 +655,7 @@ static void decode_status_frame(struct dp83640_private *dp83640, } else if (PSF_EVNT == type && len >= sizeof(*phy_txts)) { - phy_txts = (struct phy_txts *) ptr; - decode_evnt(dp83640, phy_txts, ests); - size = sizeof(*phy_txts); + size = decode_evnt(dp83640, ptr, ests); } else { size = 0; -- cgit v0.10.2 From ae6e86b7fb15520ac64513ad643de63e0b077aa5 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Tue, 14 Jun 2011 23:55:20 +0000 Subject: dp83640: drop PHY status frames in the driver. The dp83640 PHY provides time stamp and other information via special PHY status frames. Previously, the driver decoded the frames and then let the network stack drop them. This works fine when the PTP messages come over UDP. However, when receiving PTP messages via L2 packets, this creates a problem. The status frames use the official PTP destination MAC address, and so they are delivered to user space along with the "real" frames, causing confusion for applications. This commit fixes the issue by simply dropping the PHY status frames in the driver. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index ead323e..2cd8dc5 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -1044,8 +1044,8 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, if (is_status_frame(skb, type)) { decode_status_frame(dp83640, skb); - /* Let the stack drop this frame. */ - return false; + kfree_skb(skb); + return true; } SKB_PTP_TYPE(skb) = type; -- cgit v0.10.2 From bebd097a0af8bd6c51f50a65f3a435019b0e906a Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 15 Jun 2011 05:25:01 +0000 Subject: tun: teach the tun/tap driver to support netpoll Commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 changed the behavior of slave devices in regards to netpoll. Specifically it created a mutually exclusive relationship between being a slave and a netpoll-capable device. This creates problems for KVM because guests relied on needing netconsole active on a slave device to a bridge. Ideally libvirtd could just attach netconsole to the bridge device instead, but thats currently infeasible, because while the bridge device supports netpoll, it requires that all slave interface also support it, but the tun/tap driver currently does not. The most direct solution is to teach tun/tap to support netpoll, which is implemented by the patch below. I've not tested this yet, but its pretty straightforward. Signed-off-by: Neil Horman Reported-by: Rik van Riel CC: Rik van Riel CC: Maxim Krasnyansky CC: Cong Wang CC: "David S. Miller" Reviewed-by: Rik van Riel Tested-by: Rik van Riel Reviewed-by: WANG Cong Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 74e9405..5235f48 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -460,7 +460,23 @@ static u32 tun_net_fix_features(struct net_device *dev, u32 features) return (features & tun->set_features) | (features & ~TUN_USER_FEATURES); } - +#ifdef CONFIG_NET_POLL_CONTROLLER +static void tun_poll_controller(struct net_device *dev) +{ + /* + * Tun only receives frames when: + * 1) the char device endpoint gets data from user space + * 2) the tun socket gets a sendmsg call from user space + * Since both of those are syncronous operations, we are guaranteed + * never to have pending data when we poll for it + * so theres nothing to do here but return. + * We need this though so netpoll recognizes us as an interface that + * supports polling, which enables bridge devices in virt setups to + * still use netconsole + */ + return; +} +#endif static const struct net_device_ops tun_netdev_ops = { .ndo_uninit = tun_net_uninit, .ndo_open = tun_net_open, @@ -468,6 +484,9 @@ static const struct net_device_ops tun_netdev_ops = { .ndo_start_xmit = tun_net_xmit, .ndo_change_mtu = tun_net_change_mtu, .ndo_fix_features = tun_net_fix_features, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif }; static const struct net_device_ops tap_netdev_ops = { @@ -480,6 +499,9 @@ static const struct net_device_ops tap_netdev_ops = { .ndo_set_multicast_list = tun_net_mclist, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif }; /* Initialize net device. */ -- cgit v0.10.2 From a1b7f85e4f632f9cc342d8a34a3903feaf47a261 Mon Sep 17 00:00:00 2001 From: "sjur.brandeland@stericsson.com" Date: Wed, 15 Jun 2011 12:38:25 +0000 Subject: caif: Bugfix - XOFF removed channel from caif-mux MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit XOFF was mixed up with DOWN indication, causing causing CAIF channel to be removed from mux and all incoming traffic to be lost after receiving flow-off. Fix this by replacing FLOW_OFF with DOWN notification. Signed-off-by: Sjur Brændeland Signed-off-by: David S. Miller diff --git a/net/caif/cfmuxl.c b/net/caif/cfmuxl.c index 3a66b8c..c23979e 100644 --- a/net/caif/cfmuxl.c +++ b/net/caif/cfmuxl.c @@ -255,7 +255,7 @@ static void cfmuxl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl, if (cfsrvl_phyid_match(layer, phyid) && layer->ctrlcmd) { - if ((ctrl == _CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND || + if ((ctrl == _CAIF_CTRLCMD_PHYIF_DOWN_IND || ctrl == CAIF_CTRLCMD_REMOTE_SHUTDOWN_IND) && layer->id != 0) { -- cgit v0.10.2 From e3cb78c772de593afa720687ce3abbed8d93b0c3 Mon Sep 17 00:00:00 2001 From: Antoine Reversat Date: Thu, 16 Jun 2011 10:47:13 +0000 Subject: vlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support This patch removes the call to ndo_vlan_rx_register if the underlying device doesn't have hardware support for VLAN. Signed-off-by: Antoine Reversat Signed-off-by: David S. Miller diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index c7a581a..917ecb9 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -205,7 +205,7 @@ int register_vlan_dev(struct net_device *dev) grp->nr_vlans++; if (ngrp) { - if (ops->ndo_vlan_rx_register) + if (ops->ndo_vlan_rx_register && (real_dev->features & NETIF_F_HW_VLAN_RX)) ops->ndo_vlan_rx_register(real_dev, ngrp); rcu_assign_pointer(real_dev->vlgrp, ngrp); } -- cgit v0.10.2 From 118133e6580a0c912cda86109b6468b5ffe73f1c Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 16 Jun 2011 12:31:58 +0000 Subject: netdev: bfin_mac: fix memory leak when freeing dma descriptors The size of the desc array is not the size of the desc structure, so when we try to free up things, we leak some parts. Reported-by: Regis Dargent Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 68d45ba..6c019e1 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -52,13 +52,13 @@ MODULE_DESCRIPTION(DRV_DESC); MODULE_ALIAS("platform:bfin_mac"); #if defined(CONFIG_BFIN_MAC_USE_L1) -# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size) -# define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr) +# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num) +# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr) #else -# define bfin_mac_alloc(dma_handle, size) \ - dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL) -# define bfin_mac_free(dma_handle, ptr) \ - dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle) +# define bfin_mac_alloc(dma_handle, size, num) \ + dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL) +# define bfin_mac_free(dma_handle, ptr, num) \ + dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle) #endif #define PKT_BUF_SZ 1580 @@ -95,7 +95,7 @@ static void desc_list_free(void) t = t->next; } } - bfin_mac_free(dma_handle, tx_desc); + bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM); } if (rx_desc) { @@ -109,7 +109,7 @@ static void desc_list_free(void) r = r->next; } } - bfin_mac_free(dma_handle, rx_desc); + bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM); } } @@ -126,13 +126,13 @@ static int desc_list_init(void) #endif tx_desc = bfin_mac_alloc(&dma_handle, - sizeof(struct net_dma_desc_tx) * + sizeof(struct net_dma_desc_tx), CONFIG_BFIN_TX_DESC_NUM); if (tx_desc == NULL) goto init_error; rx_desc = bfin_mac_alloc(&dma_handle, - sizeof(struct net_dma_desc_rx) * + sizeof(struct net_dma_desc_rx), CONFIG_BFIN_RX_DESC_NUM); if (rx_desc == NULL) goto init_error; -- cgit v0.10.2 From d8ad7d1123a960cc9f276bd499f9325c6f5e1bd1 Mon Sep 17 00:00:00 2001 From: Takao Indoh Date: Tue, 29 Mar 2011 12:35:04 -0400 Subject: generic-ipi: Fix kexec boot crash by initializing call_single_queue before enabling interrupts There is a problem that kdump(2nd kernel) sometimes hangs up due to a pending IPI from 1st kernel. Kernel panic occurs because IPI comes before call_single_queue is initialized. To fix the crash, rename init_call_single_data() to call_function_init() and call it in start_kernel() so that call_single_queue can be initialized before enabling interrupts. The details of the crash are: (1) 2nd kernel boots up (2) A pending IPI from 1st kernel comes when irqs are first enabled in start_kernel(). (3) Kernel tries to handle the interrupt, but call_single_queue is not initialized yet at this point. As a result, in the generic_smp_call_function_single_interrupt(), NULL pointer dereference occurs when list_replace_init() tries to access &q->list.next. Therefore this patch changes the name of init_call_single_data() to call_function_init() and calls it before local_irq_enable() in start_kernel(). Signed-off-by: Takao Indoh Reviewed-by: WANG Cong Acked-by: Neil Horman Acked-by: Vivek Goyal Acked-by: Peter Zijlstra Cc: Milton Miller Cc: Jens Axboe Cc: Paul E. McKenney Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.com Signed-off-by: Ingo Molnar diff --git a/include/linux/smp.h b/include/linux/smp.h index 7ad824d..8cc38d3 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -85,12 +85,15 @@ int smp_call_function_any(const struct cpumask *mask, * Generic and arch helpers */ #ifdef CONFIG_USE_GENERIC_SMP_HELPERS +void __init call_function_init(void); void generic_smp_call_function_single_interrupt(void); void generic_smp_call_function_interrupt(void); void ipi_call_lock(void); void ipi_call_unlock(void); void ipi_call_lock_irq(void); void ipi_call_unlock_irq(void); +#else +static inline void call_function_init(void) { } #endif /* @@ -134,7 +137,7 @@ static inline void smp_send_reschedule(int cpu) { } #define smp_prepare_boot_cpu() do {} while (0) #define smp_call_function_many(mask, func, info, wait) \ (up_smp_call_function(func, info)) -static inline void init_call_single_data(void) { } +static inline void call_function_init(void) { } static inline int smp_call_function_any(const struct cpumask *mask, smp_call_func_t func, diff --git a/init/main.c b/init/main.c index cafba67..d7211fa 100644 --- a/init/main.c +++ b/init/main.c @@ -542,6 +542,7 @@ asmlinkage void __init start_kernel(void) timekeeping_init(); time_init(); profile_init(); + call_function_init(); if (!irqs_disabled()) printk(KERN_CRIT "start_kernel(): bug: interrupts were " "enabled early\n"); diff --git a/kernel/smp.c b/kernel/smp.c index 73a1951..fb67dfa 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -74,7 +74,7 @@ static struct notifier_block __cpuinitdata hotplug_cfd_notifier = { .notifier_call = hotplug_cfd, }; -static int __cpuinit init_call_single_data(void) +void __init call_function_init(void) { void *cpu = (void *)(long)smp_processor_id(); int i; @@ -88,10 +88,7 @@ static int __cpuinit init_call_single_data(void) hotplug_cfd(&hotplug_cfd_notifier, CPU_UP_PREPARE, cpu); register_cpu_notifier(&hotplug_cfd_notifier); - - return 0; } -early_initcall(init_call_single_data); /* * csd_lock/csd_unlock used to serialize access to per-cpu csd resources -- cgit v0.10.2 From cf6f1ff17f56c275424c5a341fc4d27ccbbfa71c Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 17 Jun 2011 08:18:35 +0200 Subject: ALSA: isight: adjust for new queueing API Since commit 13882a82ee16 (optimize iso queueing by setting wake only after the last packet), drivers are required to call fw_iso_context_queue_flush() after queueing a batch of packets. The missing call would have an effect only if the controller queue underruns, but then the DMA would stop completely. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/firewire/isight.c b/sound/firewire/isight.c index 86ee16c..4400308 100644 --- a/sound/firewire/isight.c +++ b/sound/firewire/isight.c @@ -209,6 +209,7 @@ static void isight_packet(struct fw_iso_context *context, u32 cycle, isight->packet_index = -1; return; } + fw_iso_context_queue_flush(isight->context); if (++index >= QUEUE_LENGTH) index = 0; -- cgit v0.10.2 From 2bc58a6fd76f89052c7f151d78fb2d8b804aacfe Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 13 Jun 2011 06:46:44 +0100 Subject: ARM: 6959/1: SMP build fix for entry-macro-multi.S The assembly code in entry-macro-multi.S does not build without the include asm/assembler.h in the case of CONFIG_SMP=y. Fixes the rather theoretical SMP build of mach-shmobile/entry-intc.c: arch/arm/include/asm/entry-macro-multi.S: Assembler messages: arch/arm/include/asm/entry-macro-multi.S:20: Error: bad instruction `alt_smp(test_for_ipi r0,r6,r5,lr)' arch/arm/include/asm/entry-macro-multi.S:20: Error: bad instruction `alt_up_b(9997f)' make[1]: *** [arch/arm/mach-shmobile/entry-intc.o] Error 1 make: *** [arch/arm/mach-shmobile] Error 2 make: *** Waiting for unfinished jobs.... Signed-off-by: Magnus Damm Signed-off-by: Russell King diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index bc2d2d7..65c3f24 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -13,6 +13,9 @@ * Do not include any C declarations in this file - it is included by * assembler source. */ +#ifndef __ASM_ASSEMBLER_H__ +#define __ASM_ASSEMBLER_H__ + #ifndef __ASSEMBLY__ #error "Only include this from assembly code" #endif @@ -290,3 +293,4 @@ .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort .endm +#endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index ec0bbf7..2da8547 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -1,3 +1,5 @@ +#include + /* * Interrupt handling. Preserves r7, r8, r9 */ -- cgit v0.10.2 From 343fda59823ca20f48578f816ec12e741214f509 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jun 2011 08:26:06 +0100 Subject: ARM: 6962/1: mach-h720x: fix build error The h7201/h7202 machines did not build since they define ARM_DMA_ZONE_OFFSET but do not select ZONE_DMA. Fix it up by selecting ZONE_DMA in their Kconfig. Cc: Sascha Hauer Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig index 9b6982e..abf356c 100644 --- a/arch/arm/mach-h720x/Kconfig +++ b/arch/arm/mach-h720x/Kconfig @@ -6,12 +6,14 @@ config ARCH_H7201 bool "gms30c7201" depends on ARCH_H720X select CPU_H7201 + select ZONE_DMA help Say Y here if you are using the Hynix GMS30C7201 Reference Board config ARCH_H7202 bool "hms30c7202" select CPU_H7202 + select ZONE_DMA depends on ARCH_H720X help Say Y here if you are using the Hynix HMS30C7202 Reference Board -- cgit v0.10.2 From 9a00318eadbb43db4e9c163c262a22a3c8b5a672 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Thu, 16 Jun 2011 12:09:37 +0100 Subject: ARM: 6963/1: Thumb-2: Relax relocation requirements for non-function symbols The "Thumb bit" of a symbol is only really meaningful for function symbols (STT_FUNC). However, sometimes a branch is relocated against a non-function symbol; for example, PC-relative branches to anonymous assembler local symbols are typically fixed up against the start-of-section symbol, which is not a function symbol. Some inline assembler generates references of this type, such as fixup code generated by macros in . The existing relocation code for R_ARM_THM_CALL/R_ARM_THM_JUMP24 interprets this case as an error, because the target symbol appears to be an ARM symbol; but this is really not the case, since the target symbol is just a base in these cases. The addend defines the precise offset to the target location, but since the addend is encoded in a non-interworking Thumb branch instruction, there is no explicit Thumb bit in the addend. Because these instructions never interwork, the implied Thumb bit in the addend is 1, and the destination is Thumb by definition. This patch removes the extraneous Thumb bit check for non-function symbols, enabling modules containing the affected relocation types to be loaded. No modification to the actual relocation code is required, since this code does not take bit[0] of the location->destination offset into account in any case. Function symbols are always checked for interworking conflicts, as before. Signed-off-by: Dave Martin Acked-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index fee7c36..016d6a0 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -193,8 +193,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset -= 0x02000000; offset += sym->st_value - loc; - /* only Thumb addresses allowed (no interworking) */ - if (!(offset & 1) || + /* + * For function symbols, only Thumb addresses are + * allowed (no interworking). + * + * For non-function symbols, the destination + * has no specific ARM/Thumb disposition, so + * the branch is resolved under the assumption + * that interworking is not required. + */ + if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC && + !(offset & 1)) || offset <= (s32)0xff000000 || offset >= (s32)0x01000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", -- cgit v0.10.2 From ad2409413d09fca763be1ac5161f2a9d82367903 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 17 Jun 2011 14:23:46 +0200 Subject: ALSA: hda - Fix no NID error with VIA codecs The via driver spews warnigs like hda-codec: no NID for mapping control Independent HP:0:0 with some codecs because snd_hda_add_nid() is called with nid=0. This patch fixes it by skipping the call when no corresponding widget is found. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 605c99e..c952582 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -832,10 +832,13 @@ static int via_hp_build(struct hda_codec *codec) knew->subdevice = HDA_SUBDEV_NID_FLAG | nid; knew->private_value = nid; - knew = via_clone_control(spec, &via_hp_mixer[1]); - if (knew == NULL) - return -ENOMEM; - knew->subdevice = side_mute_channel(spec); + nid = side_mute_channel(spec); + if (nid) { + knew = via_clone_control(spec, &via_hp_mixer[1]); + if (knew == NULL) + return -ENOMEM; + knew->subdevice = nid; + } return 0; } -- cgit v0.10.2 From 5afa9133cfe67f1bfead6049a9640c9262a7101c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 17 Jun 2011 10:14:59 -0400 Subject: SUNRPC: Ensure the RPC client only quits on fatal signals Fix a couple of instances where we were exiting the RPC client on arbitrary signals. We should only do so on fatal signals. Cc: stable@kernel.org Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index 339ba64..5daf6cc 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -577,13 +577,13 @@ retry: } inode = &gss_msg->inode->vfs_inode; for (;;) { - prepare_to_wait(&gss_msg->waitqueue, &wait, TASK_INTERRUPTIBLE); + prepare_to_wait(&gss_msg->waitqueue, &wait, TASK_KILLABLE); spin_lock(&inode->i_lock); if (gss_msg->ctx != NULL || gss_msg->msg.errno < 0) { break; } spin_unlock(&inode->i_lock); - if (signalled()) { + if (fatal_signal_pending(current)) { err = -ERESTARTSYS; goto out_intr; } diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 566bcfd..8c91415 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1061,7 +1061,7 @@ call_allocate(struct rpc_task *task) dprintk("RPC: %5u rpc_buffer allocation failed\n", task->tk_pid); - if (RPC_IS_ASYNC(task) || !signalled()) { + if (RPC_IS_ASYNC(task) || !fatal_signal_pending(current)) { task->tk_action = call_allocate; rpc_delay(task, HZ>>4); return; -- cgit v0.10.2 From e479c60456ef22b0869432887216186aabaed086 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 17 Jun 2011 04:35:37 -0400 Subject: spi/bfin_spi: fix handling of default bits per word setting The default bits per word setting should be 8 bits, but since most of our devices have been explicitly setting this up, we didn't notice when the default stopped working. At the moment, any default transfers without an explicit bit size setting error out with: bfin-spi bfin-spi.0: transfer: unsupported bits_per_word So in the transfer logic, have a bits_per_word setting of 0 fall into the 8 bit transfer logic. Signed-off-by: Mike Frysinger Signed-off-by: Grant Likely diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index f706dba..cc880c9 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -681,13 +681,14 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; - if ((bits_per_word > 0) && (bits_per_word % 16 == 0)) { + bits_per_word = transfer->bits_per_word ? : + message->spi->bits_per_word ? : 8; + if (bits_per_word % 16 == 0) { drv_data->n_bytes = bits_per_word/8; drv_data->len = (transfer->len) >> 1; cr_width = BIT_CTL_WORDSIZE; drv_data->ops = &bfin_bfin_spi_transfer_ops_u16; - } else if ((bits_per_word > 0) && (bits_per_word % 8 == 0)) { + } else if (bits_per_word % 8 == 0) { drv_data->n_bytes = bits_per_word/8; drv_data->len = transfer->len; cr_width = 0; -- cgit v0.10.2 From 879669961b11e7f40b518784863a259f735a72bf Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 17 Jun 2011 11:25:59 +0100 Subject: KEYS/DNS: Fix ____call_usermodehelper() to not lose the session keyring ____call_usermodehelper() now erases any credentials set by the subprocess_inf::init() function. The problem is that commit 17f60a7da150 ("capabilites: allow the application of capability limits to usermode helpers") creates and commits new credentials with prepare_kernel_cred() after the call to the init() function. This wipes all keyrings after umh_keys_init() is called. The best way to deal with this is to put the init() call just prior to the commit_creds() call, and pass the cred pointer to init(). That means that umh_keys_init() and suchlike can modify the credentials _before_ they are published and potentially in use by the rest of the system. This prevents request_key() from working as it is prevented from passing the session keyring it set up with the authorisation token to /sbin/request-key, and so the latter can't assume the authority to instantiate the key. This causes the in-kernel DNS resolver to fail with ENOKEY unconditionally. Signed-off-by: David Howells Acked-by: Eric Paris Tested-by: Jeff Layton Signed-off-by: Linus Torvalds diff --git a/fs/exec.c b/fs/exec.c index 97e0d52..6075a1e 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1996,7 +1996,7 @@ static void wait_for_dump_helpers(struct file *file) * is a special value that we use to trap recursive * core dumps */ -static int umh_pipe_setup(struct subprocess_info *info) +static int umh_pipe_setup(struct subprocess_info *info, struct cred *new) { struct file *rp, *wp; struct fdtable *fdt; diff --git a/include/linux/kmod.h b/include/linux/kmod.h index d4a5c84..0da38cf 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -45,7 +45,7 @@ static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; #endif -struct key; +struct cred; struct file; enum umh_wait { @@ -62,7 +62,7 @@ struct subprocess_info { char **envp; enum umh_wait wait; int retval; - int (*init)(struct subprocess_info *info); + int (*init)(struct subprocess_info *info, struct cred *new); void (*cleanup)(struct subprocess_info *info); void *data; }; @@ -73,7 +73,7 @@ struct subprocess_info *call_usermodehelper_setup(char *path, char **argv, /* Set various pieces of state into the subprocess_info structure */ void call_usermodehelper_setfns(struct subprocess_info *info, - int (*init)(struct subprocess_info *info), + int (*init)(struct subprocess_info *info, struct cred *new), void (*cleanup)(struct subprocess_info *info), void *data); @@ -87,7 +87,7 @@ void call_usermodehelper_freeinfo(struct subprocess_info *info); static inline int call_usermodehelper_fns(char *path, char **argv, char **envp, enum umh_wait wait, - int (*init)(struct subprocess_info *info), + int (*init)(struct subprocess_info *info, struct cred *new), void (*cleanup)(struct subprocess_info *), void *data) { struct subprocess_info *info; diff --git a/kernel/kmod.c b/kernel/kmod.c index ad6a81c..47613df 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -156,12 +156,6 @@ static int ____call_usermodehelper(void *data) */ set_user_nice(current, 0); - if (sub_info->init) { - retval = sub_info->init(sub_info); - if (retval) - goto fail; - } - retval = -ENOMEM; new = prepare_kernel_cred(current); if (!new) @@ -173,6 +167,14 @@ static int ____call_usermodehelper(void *data) new->cap_inheritable); spin_unlock(&umh_sysctl_lock); + if (sub_info->init) { + retval = sub_info->init(sub_info, new); + if (retval) { + abort_creds(new); + goto fail; + } + } + commit_creds(new); retval = kernel_execve(sub_info->path, @@ -388,7 +390,7 @@ EXPORT_SYMBOL(call_usermodehelper_setup); * context in which call_usermodehelper_exec is called. */ void call_usermodehelper_setfns(struct subprocess_info *info, - int (*init)(struct subprocess_info *info), + int (*init)(struct subprocess_info *info, struct cred *new), void (*cleanup)(struct subprocess_info *info), void *data) { diff --git a/security/keys/request_key.c b/security/keys/request_key.c index d31862e..8e319a4 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -71,9 +71,8 @@ EXPORT_SYMBOL(complete_request_key); * This is called in context of freshly forked kthread before kernel_execve(), * so we can simply install the desired session_keyring at this point. */ -static int umh_keys_init(struct subprocess_info *info) +static int umh_keys_init(struct subprocess_info *info, struct cred *cred) { - struct cred *cred = (struct cred*)current_cred(); struct key *keyring = info->data; return install_session_keyring_to_cred(cred, keyring); -- cgit v0.10.2 From 7585717f304f5ed005cc4ad933a69aab3efbd136 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Mon, 13 Jun 2011 20:00:16 -0400 Subject: Btrfs: fix relocation races The recent commit to get rid of our trans_mutex introduced some races with block group relocation. The problem is that relocation needs to do some record keeping about each root, and it was relying on the transaction mutex to coordinate things in subtle ways. This fix adds a mutex just for the relocation code and makes sure it doesn't have a big impact on normal operations. The race is really fixed in btrfs_record_root_in_trans, which is where we step back and wait for the relocation code to finish accounting setup. Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8490ee0..a2c91a1 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -967,6 +967,12 @@ struct btrfs_fs_info { struct srcu_struct subvol_srcu; spinlock_t trans_lock; + /* + * the reloc mutex goes with the trans lock, it is taken + * during commit to protect us from the relocation code + */ + struct mutex reloc_mutex; + struct list_head trans_list; struct list_head hashers; struct list_head dead_roots; @@ -1172,6 +1178,14 @@ struct btrfs_root { u32 type; u64 highest_objectid; + + /* btrfs_record_root_in_trans is a multi-step process, + * and it can race with the balancing code. But the + * race is very small, and only the first time the root + * is added to each transaction. So in_trans_setup + * is used to tell us when more checks are required + */ + unsigned long in_trans_setup; int ref_cows; int track_dirty; int in_radix; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 20c111b..0b2b4b7 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1620,6 +1620,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, spin_lock_init(&fs_info->fs_roots_radix_lock); spin_lock_init(&fs_info->delayed_iput_lock); spin_lock_init(&fs_info->defrag_inodes_lock); + mutex_init(&fs_info->reloc_mutex); init_completion(&fs_info->kobj_unregister); fs_info->tree_root = tree_root; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index f25b10a..086b1e6 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1368,7 +1368,7 @@ int btrfs_update_reloc_root(struct btrfs_trans_handle *trans, int ret; if (!root->reloc_root) - return 0; + goto out; reloc_root = root->reloc_root; root_item = &reloc_root->root_item; @@ -1390,6 +1390,8 @@ int btrfs_update_reloc_root(struct btrfs_trans_handle *trans, ret = btrfs_update_root(trans, root->fs_info->tree_root, &reloc_root->root_key, root_item); BUG_ON(ret); + +out: return 0; } @@ -2142,10 +2144,11 @@ int prepare_to_merge(struct reloc_control *rc, int err) u64 num_bytes = 0; int ret; - spin_lock(&root->fs_info->trans_lock); + mutex_lock(&root->fs_info->reloc_mutex); rc->merging_rsv_size += root->nodesize * (BTRFS_MAX_LEVEL - 1) * 2; rc->merging_rsv_size += rc->nodes_relocated * 2; - spin_unlock(&root->fs_info->trans_lock); + mutex_unlock(&root->fs_info->reloc_mutex); + again: if (!err) { num_bytes = rc->merging_rsv_size; @@ -2214,9 +2217,16 @@ int merge_reloc_roots(struct reloc_control *rc) int ret; again: root = rc->extent_root; - spin_lock(&root->fs_info->trans_lock); + + /* + * this serializes us with btrfs_record_root_in_transaction, + * we have to make sure nobody is in the middle of + * adding their roots to the list while we are + * doing this splice + */ + mutex_lock(&root->fs_info->reloc_mutex); list_splice_init(&rc->reloc_roots, &reloc_roots); - spin_unlock(&root->fs_info->trans_lock); + mutex_unlock(&root->fs_info->reloc_mutex); while (!list_empty(&reloc_roots)) { found = 1; @@ -3590,17 +3600,19 @@ next: static void set_reloc_control(struct reloc_control *rc) { struct btrfs_fs_info *fs_info = rc->extent_root->fs_info; - spin_lock(&fs_info->trans_lock); + + mutex_lock(&fs_info->reloc_mutex); fs_info->reloc_ctl = rc; - spin_unlock(&fs_info->trans_lock); + mutex_unlock(&fs_info->reloc_mutex); } static void unset_reloc_control(struct reloc_control *rc) { struct btrfs_fs_info *fs_info = rc->extent_root->fs_info; - spin_lock(&fs_info->trans_lock); + + mutex_lock(&fs_info->reloc_mutex); fs_info->reloc_ctl = NULL; - spin_unlock(&fs_info->trans_lock); + mutex_unlock(&fs_info->reloc_mutex); } static int check_extent_flags(u64 flags) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 2b3590b..833996a 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -126,28 +126,85 @@ static noinline int join_transaction(struct btrfs_root *root, int nofail) * to make sure the old root from before we joined the transaction is deleted * when the transaction commits */ -int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans, +static int record_root_in_trans(struct btrfs_trans_handle *trans, struct btrfs_root *root) { if (root->ref_cows && root->last_trans < trans->transid) { WARN_ON(root == root->fs_info->extent_root); WARN_ON(root->commit_root != root->node); + /* + * see below for in_trans_setup usage rules + * we have the reloc mutex held now, so there + * is only one writer in this function + */ + root->in_trans_setup = 1; + + /* make sure readers find in_trans_setup before + * they find our root->last_trans update + */ + smp_wmb(); + spin_lock(&root->fs_info->fs_roots_radix_lock); if (root->last_trans == trans->transid) { spin_unlock(&root->fs_info->fs_roots_radix_lock); return 0; } - root->last_trans = trans->transid; radix_tree_tag_set(&root->fs_info->fs_roots_radix, (unsigned long)root->root_key.objectid, BTRFS_ROOT_TRANS_TAG); spin_unlock(&root->fs_info->fs_roots_radix_lock); + root->last_trans = trans->transid; + + /* this is pretty tricky. We don't want to + * take the relocation lock in btrfs_record_root_in_trans + * unless we're really doing the first setup for this root in + * this transaction. + * + * Normally we'd use root->last_trans as a flag to decide + * if we want to take the expensive mutex. + * + * But, we have to set root->last_trans before we + * init the relocation root, otherwise, we trip over warnings + * in ctree.c. The solution used here is to flag ourselves + * with root->in_trans_setup. When this is 1, we're still + * fixing up the reloc trees and everyone must wait. + * + * When this is zero, they can trust root->last_trans and fly + * through btrfs_record_root_in_trans without having to take the + * lock. smp_wmb() makes sure that all the writes above are + * done before we pop in the zero below + */ btrfs_init_reloc_root(trans, root); + smp_wmb(); + root->in_trans_setup = 0; } return 0; } + +int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans, + struct btrfs_root *root) +{ + if (!root->ref_cows) + return 0; + + /* + * see record_root_in_trans for comments about in_trans_setup usage + * and barriers + */ + smp_rmb(); + if (root->last_trans == trans->transid && + !root->in_trans_setup) + return 0; + + mutex_lock(&root->fs_info->reloc_mutex); + record_root_in_trans(trans, root); + mutex_unlock(&root->fs_info->reloc_mutex); + + return 0; +} + /* wait for commit against the current transaction to become unblocked * when this is done, it is safe to start a new transaction, but the current * transaction might not be fully on disk. @@ -882,7 +939,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, parent = dget_parent(dentry); parent_inode = parent->d_inode; parent_root = BTRFS_I(parent_inode)->root; - btrfs_record_root_in_trans(trans, parent_root); + record_root_in_trans(trans, parent_root); /* * insert the directory item @@ -900,7 +957,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, ret = btrfs_update_inode(trans, parent_root, parent_inode); BUG_ON(ret); - btrfs_record_root_in_trans(trans, root); + record_root_in_trans(trans, root); btrfs_set_root_last_snapshot(&root->root_item, trans->transid); memcpy(new_root_item, &root->root_item, sizeof(*new_root_item)); btrfs_check_and_init_root_item(new_root_item); @@ -1247,6 +1304,13 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, } while (atomic_read(&cur_trans->num_writers) > 1 || (should_grow && cur_trans->num_joined != joined)); + /* + * the reloc mutex makes sure that we stop + * the balancing code from coming in and moving + * extents around in the middle of the commit + */ + mutex_lock(&root->fs_info->reloc_mutex); + ret = create_pending_snapshots(trans, root->fs_info); BUG_ON(ret); @@ -1312,6 +1376,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, root->fs_info->running_transaction = NULL; root->fs_info->trans_no_join = 0; spin_unlock(&root->fs_info->trans_lock); + mutex_unlock(&root->fs_info->reloc_mutex); wake_up(&root->fs_info->transaction_wait); -- cgit v0.10.2 From f6ba6fe2d913da6707a71a413d6ec8ae98d6ce18 Mon Sep 17 00:00:00 2001 From: Alex He Date: Wed, 8 Jun 2011 18:34:06 +0800 Subject: xHCI 1.0: Incompatible Device Error It is one new TRB Completion Code for the xHCI spec v1.0. Asserted if the xHC detects a problem with a device that does not allow it to be successfully accessed, e.g. due to a device compliance or compatibility problem. This error may be returned by any command or transfer, and is fatal as far as the Slot is concerned. Return -EPROTO by urb->status or frame->status of ISOC for transfer case. And return -ENODEV for configure endpoint command, evaluate context command and address device command if there is an incompatible Device Error. The error codes will be sent back to the USB core to decide how to do. It's unnecessary for other commands because after the three commands run successfully means that the device has been accepted. Signed-off-by: Alex He Signed-off-by: Sarah Sharp diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0c00849..436332a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1733,6 +1733,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, frame->status = -EOVERFLOW; skip_td = true; break; + case COMP_DEV_ERR: case COMP_STALL: frame->status = -EPROTO; skip_td = true; @@ -2016,6 +2017,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, TRB_TO_SLOT_ID(le32_to_cpu(event->flags)), ep_index); goto cleanup; + case COMP_DEV_ERR: + xhci_warn(xhci, "WARN: detect an incompatible device"); + status = -EPROTO; + break; case COMP_MISSED_INT: /* * When encounter missed service error, one or more isoc tds diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index e5a0171..15eb4c3 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1551,6 +1551,11 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, "and endpoint is not disabled.\n"); ret = -EINVAL; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for endpoint " + "configure command.\n"); + ret = -ENODEV; + break; case COMP_SUCCESS: dev_dbg(&udev->dev, "Successful Endpoint Configure command\n"); ret = 0; @@ -1585,6 +1590,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1); ret = -EINVAL; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for evaluate " + "context command.\n"); + ret = -ENODEV; + break; case COMP_MEL_ERR: /* Max Exit Latency too large error */ dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n"); @@ -2867,6 +2877,11 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) dev_warn(&udev->dev, "Device not responding to set address.\n"); ret = -EPROTO; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for address " + "device command.\n"); + ret = -ENODEV; + break; case COMP_SUCCESS: xhci_dbg(xhci, "Successful Address Device command\n"); break; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7d1ea3b..ba90af1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -874,6 +874,8 @@ struct xhci_transfer_event { #define COMP_PING_ERR 20 /* Event Ring is full */ #define COMP_ER_FULL 21 +/* Incompatible Device Error */ +#define COMP_DEV_ERR 22 /* Missed Service Error - HC couldn't service an isoc ep within interval */ #define COMP_MISSED_INT 23 /* Successfully stopped command ring */ -- cgit v0.10.2 From c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 15 Jun 2011 23:47:21 +0200 Subject: xhci: Add reset on resume quirk for asrock p67 host The asrock p67 xhci controller completely dies on resume, add a quirk for this, to bring the host back online after a suspend. This should be backported to stable kernels as old as 2.6.37. Signed-off-by: Maarten Lankhorst Signed-off-by: Sarah Sharp Cc: stable@kernel.org diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 17541d0..cb16de2 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -29,6 +29,9 @@ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_VENDOR_ID_ETRON 0x1b6f +#define PCI_DEVICE_ID_ASROCK_P67 0x7023 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd) xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; } + if (pdev->vendor == PCI_VENDOR_ID_ETRON && + pdev->device == PCI_DEVICE_ID_ASROCK_P67) { + xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + } /* Make sure the HC is halted. */ retval = xhci_halt(xhci); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 15eb4c3..f5fe1ac 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) msleep(100); spin_lock_irq(&xhci->lock); + if (xhci->quirks & XHCI_RESET_ON_RESUME) + hibernated = true; if (!hibernated) { /* step 1: restore register */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index ba90af1..d8bbf5c 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1310,6 +1310,7 @@ struct xhci_hcd { */ #define XHCI_EP_LIMIT_QUIRK (1 << 5) #define XHCI_BROKEN_MSI (1 << 6) +#define XHCI_RESET_ON_RESUME (1 << 7) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ -- cgit v0.10.2 From b3df3f9c7df9a8d85e03e158d35487618a160901 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 15 Jun 2011 19:57:46 -0700 Subject: xhci: Always set urb->status to zero for isoc endpoints. When the xHCI driver encounters a Missed Service Interval event for an isochronous endpoint ring, it means the host controller skipped over one or more isochronous TDs. For TD that is skipped, skip_isoc_td() is called. This sets the frame descriptor status to -EXDEV, and also sets the value stored in the int pointed to by status to -EXDEV. If the isochronous TD happens to be the last TD in an URB, handle_tx_event() will use the status variable to give back the URB to the USB core. That means drivers will see urb->status as -EXDEV. It turns out that EHCI, UHCI, and OHCI always set urb->status to zero for an isochronous urb, regardless of what the frame status is. See itd_complete() in ehci-sched.c: } else { /* URB was too late */ desc->status = -EXDEV; } } /* handle completion now? */ if (likely ((urb_index + 1) != urb->number_of_packets)) goto done; /* ASSERT: it's really the last itd for this urb list_for_each_entry (itd, &stream->td_list, itd_list) BUG_ON (itd->urb == urb); */ /* give urb back to the driver; completion often (re)submits */ dev = urb->dev; ehci_urb_done(ehci, urb, 0); ehci_urb_done() completes the URB with the status of the third argument, which is always zero in this case. It turns out that many USB webcam drivers, such as uvcvideo, cannot handle urb->status set to a non-zero value. They will not resubmit their isochronous URBs in that case, and userspace will see a frozen video. Change the xHCI driver to be consistent with the EHCI and UHCI driver, and always set urb->status to 0 for isochronous URBs. This patch should be backported to kernels as old as 2.6.36 Signed-off-by: Sarah Sharp Cc: "Xu, Andiry" Cc: stable@kernel.org diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 436332a..70cacbb 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1768,9 +1768,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, } } - if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS) - *status = 0; - return finish_td(xhci, td, event_trb, event, ep, status, false); } @@ -1788,8 +1785,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, idx = urb_priv->td_cnt; frame = &td->urb->iso_frame_desc[idx]; - /* The transfer is partly done */ - *status = -EXDEV; + /* The transfer is partly done. */ frame->status = -EXDEV; /* calc actual length */ @@ -2177,6 +2173,11 @@ cleanup: urb->transfer_buffer_length, status); spin_unlock(&xhci->lock); + /* EHCI, UHCI, and OHCI always unconditionally set the + * urb->status of an isochronous endpoint to 0. + */ + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + status = 0; usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status); spin_lock(&xhci->lock); } -- cgit v0.10.2 From a9e758634f464ffb09344821a9f0b5a5c6df2b3e Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 16 Jun 2011 13:06:04 -0700 Subject: USB: Fix up URB error codes to reflect implementation. Documentation/usb/error-codes.txt mentions that urb->status can be set to -EXDEV, if the isochronous transfer was not fully completed. However, in practice, EHCI, UHCI, and OHCI all only set -EXDEV in the individual frame status, never in the URB status. Those host controller actually always pass in a zero status to usb_hcd_giveback_urb, and rely on the core to set the appropriate status value. The xHCI driver ran into issues with the uvcvideo driver when it tried to set -EXDEV in urb->status, because the driver refused to submit URBs, and the userspace camera application's video froze. Clean up the documentation to reflect the actual implementation. Signed-off-by: Sarah Sharp Acked-by: Alan Stern diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt index d83703e..b3f606b 100644 --- a/Documentation/usb/error-codes.txt +++ b/Documentation/usb/error-codes.txt @@ -76,6 +76,13 @@ A transfer's actual_length may be positive even when an error has been reported. That's because transfers often involve several packets, so that one or more packets could finish before an error stops further endpoint I/O. +For isochronous URBs, the urb status value is non-zero only if the URB is +unlinked, the device is removed, the host controller is disabled, or the total +transferred length is less than the requested length and the URB_SHORT_NOT_OK +flag is set. Completion handlers for isochronous URBs should only see +urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO. +Individual frame descriptor status fields may report more status codes. + 0 Transfer completed successfully @@ -132,7 +139,7 @@ one or more packets could finish before an error stops further endpoint I/O. device removal events immediately. -EXDEV ISO transfer only partially completed - look at individual frame status for details + (only set in iso_frame_desc[n].status, not urb->status) -EINVAL ISO madness, if this happens: Log off and go home -- cgit v0.10.2 From 2ff7d09a1b0f20f2d9c1bde0e003d4e384de2313 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Wed, 1 Jun 2011 17:49:14 +0000 Subject: RDMA/cxgb4: Don't exceed hw IQ depth limit for user CQs Memory allocated for user CQs gets rounded up to the next page boundary. And after rounding, we recalculate the resulting IQ depth and we need to make sure we don't exceed the HW limits. This bug can result a much smaller CQ allocated than was expected if the HW size field is exceeded, resulting in CQ overflow failures. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index 8d8f8ad..1720dc7 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -801,6 +801,10 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries, if (ucontext) { memsize = roundup(memsize, PAGE_SIZE); hwentries = memsize / sizeof *chp->cq.queue; + while (hwentries > T4_MAX_IQ_SIZE) { + memsize -= PAGE_SIZE; + hwentries = memsize / sizeof *chp->cq.queue; + } } chp->cq.size = hwentries; chp->cq.memsize = memsize; -- cgit v0.10.2 From 3ed4498caf381a73d6259d3ffacc914b17a507ec Mon Sep 17 00:00:00 2001 From: David Sterba Date: Mon, 13 Jun 2011 17:54:22 +0000 Subject: btrfs: fix dereference of ERR_PTR value smatch reports: btrfs_recover_log_trees error: 'wc.replay_dest' dereferencing possible ERR_PTR() Signed-off-by: David Sterba Signed-off-by: Chris Mason diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 592396c..4ce8a9f 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -3177,7 +3177,7 @@ again: tmp_key.offset = (u64)-1; wc.replay_dest = btrfs_read_fs_root_no_name(fs_info, &tmp_key); - BUG_ON(!wc.replay_dest); + BUG_ON(IS_ERR_OR_NULL(wc.replay_dest)); wc.replay_dest->log_root = log; btrfs_record_root_in_trans(trans, wc.replay_dest); -- cgit v0.10.2 From 9fe6a50fb764f508dd2de47a66e62e51388791fb Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Thu, 16 Jun 2011 09:04:57 +0000 Subject: btrfs: Remove unused sysfs code Removes code no longer used. The sysfs file itself is kept, because the btrfs developers expressed interest in putting new entries to sysfs. Signed-off-by: Maarten Lankhorst Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index a2c91a1..8e948ec 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1195,7 +1195,6 @@ struct btrfs_root { struct btrfs_key defrag_max; int defrag_running; char *name; - int in_sysfs; /* the dirty list is only used by non-reference counted roots */ struct list_head dirty_list; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 0b2b4b7..c25ef5a 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1044,7 +1044,6 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize, root->last_trans = 0; root->highest_objectid = 0; root->name = NULL; - root->in_sysfs = 0; root->inode_tree = RB_ROOT; INIT_RADIX_TREE(&root->delayed_nodes_tree, GFP_ATOMIC); root->block_rsv = NULL; diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c index c3c223a..daac9ae 100644 --- a/fs/btrfs/sysfs.c +++ b/fs/btrfs/sysfs.c @@ -28,152 +28,6 @@ #include "disk-io.h" #include "transaction.h" -static ssize_t root_blocks_used_show(struct btrfs_root *root, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%llu\n", - (unsigned long long)btrfs_root_used(&root->root_item)); -} - -static ssize_t root_block_limit_show(struct btrfs_root *root, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%llu\n", - (unsigned long long)btrfs_root_limit(&root->root_item)); -} - -static ssize_t super_blocks_used_show(struct btrfs_fs_info *fs, char *buf) -{ - - return snprintf(buf, PAGE_SIZE, "%llu\n", - (unsigned long long)btrfs_super_bytes_used(&fs->super_copy)); -} - -static ssize_t super_total_blocks_show(struct btrfs_fs_info *fs, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%llu\n", - (unsigned long long)btrfs_super_total_bytes(&fs->super_copy)); -} - -static ssize_t super_blocksize_show(struct btrfs_fs_info *fs, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%llu\n", - (unsigned long long)btrfs_super_sectorsize(&fs->super_copy)); -} - -/* this is for root attrs (subvols/snapshots) */ -struct btrfs_root_attr { - struct attribute attr; - ssize_t (*show)(struct btrfs_root *, char *); - ssize_t (*store)(struct btrfs_root *, const char *, size_t); -}; - -#define ROOT_ATTR(name, mode, show, store) \ -static struct btrfs_root_attr btrfs_root_attr_##name = __ATTR(name, mode, \ - show, store) - -ROOT_ATTR(blocks_used, 0444, root_blocks_used_show, NULL); -ROOT_ATTR(block_limit, 0644, root_block_limit_show, NULL); - -static struct attribute *btrfs_root_attrs[] = { - &btrfs_root_attr_blocks_used.attr, - &btrfs_root_attr_block_limit.attr, - NULL, -}; - -/* this is for super attrs (actual full fs) */ -struct btrfs_super_attr { - struct attribute attr; - ssize_t (*show)(struct btrfs_fs_info *, char *); - ssize_t (*store)(struct btrfs_fs_info *, const char *, size_t); -}; - -#define SUPER_ATTR(name, mode, show, store) \ -static struct btrfs_super_attr btrfs_super_attr_##name = __ATTR(name, mode, \ - show, store) - -SUPER_ATTR(blocks_used, 0444, super_blocks_used_show, NULL); -SUPER_ATTR(total_blocks, 0444, super_total_blocks_show, NULL); -SUPER_ATTR(blocksize, 0444, super_blocksize_show, NULL); - -static struct attribute *btrfs_super_attrs[] = { - &btrfs_super_attr_blocks_used.attr, - &btrfs_super_attr_total_blocks.attr, - &btrfs_super_attr_blocksize.attr, - NULL, -}; - -static ssize_t btrfs_super_attr_show(struct kobject *kobj, - struct attribute *attr, char *buf) -{ - struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info, - super_kobj); - struct btrfs_super_attr *a = container_of(attr, - struct btrfs_super_attr, - attr); - - return a->show ? a->show(fs, buf) : 0; -} - -static ssize_t btrfs_super_attr_store(struct kobject *kobj, - struct attribute *attr, - const char *buf, size_t len) -{ - struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info, - super_kobj); - struct btrfs_super_attr *a = container_of(attr, - struct btrfs_super_attr, - attr); - - return a->store ? a->store(fs, buf, len) : 0; -} - -static ssize_t btrfs_root_attr_show(struct kobject *kobj, - struct attribute *attr, char *buf) -{ - struct btrfs_root *root = container_of(kobj, struct btrfs_root, - root_kobj); - struct btrfs_root_attr *a = container_of(attr, - struct btrfs_root_attr, - attr); - - return a->show ? a->show(root, buf) : 0; -} - -static ssize_t btrfs_root_attr_store(struct kobject *kobj, - struct attribute *attr, - const char *buf, size_t len) -{ - struct btrfs_root *root = container_of(kobj, struct btrfs_root, - root_kobj); - struct btrfs_root_attr *a = container_of(attr, - struct btrfs_root_attr, - attr); - return a->store ? a->store(root, buf, len) : 0; -} - -static void btrfs_super_release(struct kobject *kobj) -{ - struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info, - super_kobj); - complete(&fs->kobj_unregister); -} - -static void btrfs_root_release(struct kobject *kobj) -{ - struct btrfs_root *root = container_of(kobj, struct btrfs_root, - root_kobj); - complete(&root->kobj_unregister); -} - -static const struct sysfs_ops btrfs_super_attr_ops = { - .show = btrfs_super_attr_show, - .store = btrfs_super_attr_store, -}; - -static const struct sysfs_ops btrfs_root_attr_ops = { - .show = btrfs_root_attr_show, - .store = btrfs_root_attr_store, -}; - /* /sys/fs/btrfs/ entry */ static struct kset *btrfs_kset; -- cgit v0.10.2 From 19fd294957e426bfdd8e19085096467ec18df5c4 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 15 Jun 2011 10:47:30 +0000 Subject: btrfs: fix wrong reservation when doing delayed inode operations We have migrated the space for the delayed inode items from trans_block_rsv to global_block_rsv, but we forgot to set trans->block_rsv to global_block_rsv when we doing delayed inode operations, and the following Oops happened: [ 9792.654889] ------------[ cut here ]------------ [ 9792.654898] WARNING: at fs/btrfs/extent-tree.c:5681 btrfs_alloc_free_block+0xca/0x27c [btrfs]() [ 9792.654899] Hardware name: To Be Filled By O.E.M. [ 9792.654900] Modules linked in: btrfs zlib_deflate libcrc32c ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables arc4 rt61pci rt2x00pci rt2x00lib snd_hda_codec_hdmi mac80211 snd_hda_codec_realtek cfg80211 snd_hda_intel edac_core snd_seq rfkill pcspkr serio_raw snd_hda_codec eeprom_93cx6 edac_mce_amd sp5100_tco i2c_piix4 k10temp snd_hwdep snd_seq_device snd_pcm floppy r8169 xhci_hcd mii snd_timer snd soundcore snd_page_alloc ipv6 firewire_ohci pata_acpi ata_generic firewire_core pata_via crc_itu_t radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan] [ 9792.654919] Pid: 2762, comm: rm Tainted: G W 2.6.39+ #1 [ 9792.654920] Call Trace: [ 9792.654922] [] warn_slowpath_common+0x83/0x9b [ 9792.654925] [] warn_slowpath_null+0x1a/0x1c [ 9792.654933] [] btrfs_alloc_free_block+0xca/0x27c [btrfs] [ 9792.654945] [] ? map_extent_buffer+0x6e/0xa8 [btrfs] [ 9792.654953] [] __btrfs_cow_block+0xfc/0x30c [btrfs] [ 9792.654963] [] ? btrfs_buffer_uptodate+0x47/0x58 [btrfs] [ 9792.654970] [] ? read_block_for_search+0x94/0x368 [btrfs] [ 9792.654978] [] btrfs_cow_block+0xfe/0x146 [btrfs] [ 9792.654986] [] btrfs_search_slot+0x14d/0x4b6 [btrfs] [ 9792.654997] [] ? map_extent_buffer+0x6e/0xa8 [btrfs] [ 9792.655022] [] btrfs_lookup_inode+0x2f/0x8f [btrfs] [ 9792.655025] [] ? _cond_resched+0xe/0x22 [ 9792.655027] [] ? mutex_lock+0x29/0x50 [ 9792.655039] [] btrfs_update_delayed_inode+0x72/0x137 [btrfs] [ 9792.655051] [] btrfs_run_delayed_items+0x90/0xdb [btrfs] [ 9792.655062] [] btrfs_commit_transaction+0x228/0x654 [btrfs] [ 9792.655064] [] ? remove_wait_queue+0x3a/0x3a [ 9792.655075] [] btrfs_evict_inode+0x14d/0x202 [btrfs] [ 9792.655077] [] evict+0x71/0x111 [ 9792.655079] [] iput+0x12a/0x132 [ 9792.655081] [] do_unlinkat+0x106/0x155 [ 9792.655083] [] ? path_put+0x1f/0x23 [ 9792.655085] [] ? audit_syscall_entry+0x145/0x171 [ 9792.655087] [] ? putname+0x34/0x36 [ 9792.655090] [] sys_unlinkat+0x29/0x2b [ 9792.655092] [] system_call_fastpath+0x16/0x1b [ 9792.655093] ---[ end trace 02b696eb02b3f768 ]--- This patch fix it by setting the reservation of the transaction handle to the correct one. Reported-by: Josef Bacik Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 6462c29..fc515b7 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -297,7 +297,6 @@ struct btrfs_delayed_item *btrfs_alloc_delayed_item(u32 data_len) item->data_len = data_len; item->ins_or_del = 0; item->bytes_reserved = 0; - item->block_rsv = NULL; item->delayed_node = NULL; atomic_set(&item->refs, 1); } @@ -593,10 +592,8 @@ static int btrfs_delayed_item_reserve_metadata(struct btrfs_trans_handle *trans, num_bytes = btrfs_calc_trans_metadata_size(root, 1); ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); - if (!ret) { + if (!ret) item->bytes_reserved = num_bytes; - item->block_rsv = dst_rsv; - } return ret; } @@ -604,10 +601,13 @@ static int btrfs_delayed_item_reserve_metadata(struct btrfs_trans_handle *trans, static void btrfs_delayed_item_release_metadata(struct btrfs_root *root, struct btrfs_delayed_item *item) { + struct btrfs_block_rsv *rsv; + if (!item->bytes_reserved) return; - btrfs_block_rsv_release(root, item->block_rsv, + rsv = &root->fs_info->global_block_rsv; + btrfs_block_rsv_release(root, rsv, item->bytes_reserved); } @@ -1014,6 +1014,7 @@ int btrfs_run_delayed_items(struct btrfs_trans_handle *trans, struct btrfs_delayed_root *delayed_root; struct btrfs_delayed_node *curr_node, *prev_node; struct btrfs_path *path; + struct btrfs_block_rsv *block_rsv; int ret = 0; path = btrfs_alloc_path(); @@ -1021,6 +1022,9 @@ int btrfs_run_delayed_items(struct btrfs_trans_handle *trans, return -ENOMEM; path->leave_spinning = 1; + block_rsv = trans->block_rsv; + trans->block_rsv = &root->fs_info->global_block_rsv; + delayed_root = btrfs_get_delayed_root(root); curr_node = btrfs_first_delayed_node(delayed_root); @@ -1045,6 +1049,7 @@ int btrfs_run_delayed_items(struct btrfs_trans_handle *trans, } btrfs_free_path(path); + trans->block_rsv = block_rsv; return ret; } @@ -1052,6 +1057,7 @@ static int __btrfs_commit_inode_delayed_items(struct btrfs_trans_handle *trans, struct btrfs_delayed_node *node) { struct btrfs_path *path; + struct btrfs_block_rsv *block_rsv; int ret; path = btrfs_alloc_path(); @@ -1059,6 +1065,9 @@ static int __btrfs_commit_inode_delayed_items(struct btrfs_trans_handle *trans, return -ENOMEM; path->leave_spinning = 1; + block_rsv = trans->block_rsv; + trans->block_rsv = &node->root->fs_info->global_block_rsv; + ret = btrfs_insert_delayed_items(trans, path, node->root, node); if (!ret) ret = btrfs_delete_delayed_items(trans, path, node->root, node); @@ -1066,6 +1075,7 @@ static int __btrfs_commit_inode_delayed_items(struct btrfs_trans_handle *trans, ret = btrfs_update_delayed_inode(trans, node->root, path, node); btrfs_free_path(path); + trans->block_rsv = block_rsv; return ret; } @@ -1116,6 +1126,7 @@ static void btrfs_async_run_delayed_node_done(struct btrfs_work *work) struct btrfs_path *path; struct btrfs_delayed_node *delayed_node = NULL; struct btrfs_root *root; + struct btrfs_block_rsv *block_rsv; unsigned long nr = 0; int need_requeue = 0; int ret; @@ -1134,6 +1145,9 @@ static void btrfs_async_run_delayed_node_done(struct btrfs_work *work) if (IS_ERR(trans)) goto free_path; + block_rsv = trans->block_rsv; + trans->block_rsv = &root->fs_info->global_block_rsv; + ret = btrfs_insert_delayed_items(trans, path, root, delayed_node); if (!ret) ret = btrfs_delete_delayed_items(trans, path, root, @@ -1176,6 +1190,7 @@ static void btrfs_async_run_delayed_node_done(struct btrfs_work *work) nr = trans->blocks_used; + trans->block_rsv = block_rsv; btrfs_end_transaction_dmeta(trans, root); __btrfs_btree_balance_dirty(root, nr); free_path: diff --git a/fs/btrfs/delayed-inode.h b/fs/btrfs/delayed-inode.h index eb7d240..cb79b67 100644 --- a/fs/btrfs/delayed-inode.h +++ b/fs/btrfs/delayed-inode.h @@ -75,7 +75,6 @@ struct btrfs_delayed_item { struct list_head tree_list; /* used for batch insert/delete items */ struct list_head readdir_list; /* used for readdir items */ u64 bytes_reserved; - struct btrfs_block_rsv *block_rsv; struct btrfs_delayed_node *delayed_node; atomic_t refs; int ins_or_del; -- cgit v0.10.2 From 35a30d7ce54e087d8025a725d4e5a2fdee723a9f Mon Sep 17 00:00:00 2001 From: David Sterba Date: Mon, 13 Jun 2011 15:18:23 +0000 Subject: btrfs: fix uninitialized return value When allocation fails in btrfs_read_fs_root_no_name, ret is not set although it is returned, holding a garbage value. Signed-off-by: David Sterba Reviewed-by: Li Zefan Signed-off-by: Chris Mason diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index c25ef5a..1ac8db5d 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1299,12 +1299,12 @@ again: return root; root->free_ino_ctl = kzalloc(sizeof(*root->free_ino_ctl), GFP_NOFS); - if (!root->free_ino_ctl) - goto fail; root->free_ino_pinned = kzalloc(sizeof(*root->free_ino_pinned), GFP_NOFS); - if (!root->free_ino_pinned) + if (!root->free_ino_pinned || !root->free_ino_ctl) { + ret = -ENOMEM; goto fail; + } btrfs_init_free_ino_ctl(root); mutex_init(&root->fs_commit_mutex); -- cgit v0.10.2 From 301c2c3f039a1f9478f6cbef60f2ccd4da9bd4a1 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 14 Jun 2011 20:59:21 +0000 Subject: RDMA/cxgb4: Don't truncate MR lengths Remove left-over code from T3 that limited MR sizes to 32b. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 273ffe4..0347eed 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -625,7 +625,7 @@ pbl_done: mhp->attr.perms = c4iw_ib_to_tpt_access(acc); mhp->attr.va_fbo = virt; mhp->attr.page_size = shift - 12; - mhp->attr.len = (u32) length; + mhp->attr.len = length; err = register_mem(rhp, php, mhp, shift); if (err) -- cgit v0.10.2 From 8da7e7a55231543b84ac84e93ad5ca9d340773d7 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 14 Jun 2011 20:59:27 +0000 Subject: RDMA/cxgb4: Couple of abort fixes - fix a race where the driver could end up sending a close_con_req after an abort_rpl. In c4iw_ep_disconnect(), send abort or close request with the ep mutex held. - fix a hang where driver fails to wake up when a connection is reset during a normal close. Wake up any waiters in the interrupt path, and correctly cleanup after rdma_fini() failures. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index f660cd0..31fb440 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1463,9 +1463,9 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb) struct c4iw_qp_attributes attrs; int disconnect = 1; int release = 0; - int abort = 0; struct tid_info *t = dev->rdev.lldi.tids; unsigned int tid = GET_TID(hdr); + int ret; ep = lookup_tid(t, tid); PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); @@ -1501,10 +1501,12 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb) start_ep_timer(ep); __state_set(&ep->com, CLOSING); attrs.next_state = C4IW_QP_STATE_CLOSING; - abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, + ret = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, C4IW_QP_ATTR_NEXT_STATE, &attrs, 1); - peer_close_upcall(ep); - disconnect = 1; + if (ret != -ECONNRESET) { + peer_close_upcall(ep); + disconnect = 1; + } break; case ABORTING: disconnect = 0; @@ -2109,15 +2111,16 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp) break; } - mutex_unlock(&ep->com.mutex); if (close) { - if (abrupt) - ret = abort_connection(ep, NULL, gfp); - else + if (abrupt) { + close_complete_upcall(ep); + ret = send_abort(ep, NULL, gfp); + } else ret = send_halfclose(ep, gfp); if (ret) fatal = 1; } + mutex_unlock(&ep->com.mutex); if (fatal) release_ep_resources(ep); return ret; @@ -2301,6 +2304,31 @@ static int fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb) return 0; } +static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb) +{ + struct cpl_abort_req_rss *req = cplhdr(skb); + struct c4iw_ep *ep; + struct tid_info *t = dev->rdev.lldi.tids; + unsigned int tid = GET_TID(req); + + ep = lookup_tid(t, tid); + if (is_neg_adv_abort(req->status)) { + PDBG("%s neg_adv_abort ep %p tid %u\n", __func__, ep, + ep->hwtid); + kfree_skb(skb); + return 0; + } + PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid, + ep->com.state); + + /* + * Wake up any threads in rdma_init() or rdma_fini(). + */ + c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET); + sched(dev, skb); + return 0; +} + /* * Most upcalls from the T4 Core go to sched() to * schedule the processing on a work queue. @@ -2317,7 +2345,7 @@ c4iw_handler_func c4iw_handlers[NUM_CPL_CMDS] = { [CPL_PASS_ESTABLISH] = sched, [CPL_PEER_CLOSE] = sched, [CPL_CLOSE_CON_RPL] = sched, - [CPL_ABORT_REQ_RSS] = sched, + [CPL_ABORT_REQ_RSS] = peer_abort_intr, [CPL_RDMA_TERMINATE] = sched, [CPL_FW4_ACK] = sched, [CPL_SET_TCB_RPL] = set_tcb_rpl, diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 3b773b0..a41578e 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -1207,11 +1207,8 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp, c4iw_get_ep(&qhp->ep->com); } ret = rdma_fini(rhp, qhp, ep); - if (ret) { - if (internal) - c4iw_get_ep(&qhp->ep->com); + if (ret) goto err; - } break; case C4IW_QP_STATE_TERMINATE: set_state(qhp, C4IW_QP_STATE_TERMINATE); -- cgit v0.10.2 From 3126448451105fae59de0058c68692aa09aa4c37 Mon Sep 17 00:00:00 2001 From: Mitko Haralanov Date: Thu, 9 Jun 2011 20:27:26 +0000 Subject: IB/qib: Ensure that LOS and DFE are being turned off Due to timing, it is possible for the LOS and DFE to remain on. This is due to the link progressing to LinkUP prior to the driver getting the first Status Changed interrupt. By expanding the conditions under which LOS is turned off and DFE timeout is being set, timing is no longer an issue. Signed-off-by: Mitko Haralanov Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 9f53e68..8ec5237 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -469,6 +469,8 @@ static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { #define IB_7322_LT_STATE_RECOVERIDLE 0x0f #define IB_7322_LT_STATE_CFGENH 0x10 #define IB_7322_LT_STATE_CFGTEST 0x11 +#define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12 +#define IB_7322_LT_STATE_CFGWAITENH 0x13 /* link state machine states from IBC */ #define IB_7322_L_STATE_DOWN 0x0 @@ -498,8 +500,10 @@ static const u8 qib_7322_physportstate[0x20] = { IB_PHYSPORTSTATE_LINK_ERR_RECOVER, [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, - [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, - [0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH, + [IB_7322_LT_STATE_CFGWAITRMTTEST] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7322_LT_STATE_CFGWAITENH] = + IB_PHYSPORTSTATE_CFG_WAIT_ENH, [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, @@ -1692,7 +1696,9 @@ static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) break; } - if (ibclt == IB_7322_LT_STATE_CFGTEST && + if (((ibclt >= IB_7322_LT_STATE_CFGTEST && + ibclt <= IB_7322_LT_STATE_CFGWAITENH) || + ibclt == IB_7322_LT_STATE_LINKUP) && (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { force_h1(ppd); ppd->cpspec->qdr_reforce = 1; @@ -7301,12 +7307,17 @@ static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) { u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); - printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS %s\n", - ppd->dd->unit, ppd->port, (enable ? "on" : "off")); - if (enable) + u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); + + if (enable && !state) { + printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n", + ppd->dd->unit, ppd->port); data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); - else + } else if (!enable && state) { + printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n", + ppd->dd->unit, ppd->port); data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); + } qib_write_kreg_port(ppd, krp_serdesctrl, data); } diff --git a/drivers/infiniband/hw/qib/qib_intr.c b/drivers/infiniband/hw/qib/qib_intr.c index a693c56..6ae57d2 100644 --- a/drivers/infiniband/hw/qib/qib_intr.c +++ b/drivers/infiniband/hw/qib/qib_intr.c @@ -96,8 +96,12 @@ void qib_handle_e_ibstatuschanged(struct qib_pportdata *ppd, u64 ibcs) * states, or if it transitions from any of the up (INIT or better) * states into any of the down states (except link recovery), then * call the chip-specific code to take appropriate actions. + * + * ppd->lflags could be 0 if this is the first time the interrupt + * handlers has been called but the link is already up. */ - if (lstate >= IB_PORT_INIT && (ppd->lflags & QIBL_LINKDOWN) && + if (lstate >= IB_PORT_INIT && + (!ppd->lflags || (ppd->lflags & QIBL_LINKDOWN)) && ltstate == IB_PHYSPORTSTATE_LINKUP) { /* transitioned to UP */ if (dd->f_ib_updown(ppd, 1, ibcs)) -- cgit v0.10.2 From cab758ef30e0e40f783627abc4b66d1b48fecd49 Mon Sep 17 00:00:00 2001 From: Clive Stubbings Date: Thu, 16 Jun 2011 22:30:39 +0000 Subject: fs_enet: fix freescale FCC ethernet dp buffer alignment The RIPTR and TIPTR (receive/transmit internal temporary data pointer), used by microcode as a temporary buffer for data, must be 32-byte aligned according to the RM for MPC8247. Tested on mgcoge. Signed-off-by: Clive Stubbings Signed-off-by: Holger Brunck cc: Pantelis Antoniou cc: Vitaly Bordug cc: netdev@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 7a84e45..7583a95 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -105,7 +105,7 @@ static int do_pd_setup(struct fs_enet_private *fep) goto out_ep; fep->fcc.mem = (void __iomem *)cpm2_immr; - fpi->dpram_offset = cpm_dpalloc(128, 8); + fpi->dpram_offset = cpm_dpalloc(128, 32); if (IS_ERR_VALUE(fpi->dpram_offset)) { ret = fpi->dpram_offset; goto out_fcccp; -- cgit v0.10.2 From 1eddceadb0d6441cd39b2c38705a8f5fec86e770 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 Jun 2011 03:45:15 +0000 Subject: net: rfs: enable RFS before first data packet is received MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Le jeudi 16 juin 2011 à 23:38 -0400, David Miller a écrit : > From: Ben Hutchings > Date: Fri, 17 Jun 2011 00:50:46 +0100 > > > On Wed, 2011-06-15 at 04:15 +0200, Eric Dumazet wrote: > >> @@ -1594,6 +1594,7 @@ int tcp_v4_do_rcv(struct sock *sk, struct sk_buff *skb) > >> goto discard; > >> > >> if (nsk != sk) { > >> + sock_rps_save_rxhash(nsk, skb->rxhash); > >> if (tcp_child_process(sk, nsk, skb)) { > >> rsk = nsk; > >> goto reset; > >> > > > > I haven't tried this, but it looks reasonable to me. > > > > What about IPv6? The logic in tcp_v6_do_rcv() looks very similar. > > Indeed ipv6 side needs the same fix. > > Eric please add that part and resubmit. And in fact I might stick > this into net-2.6 instead of net-next-2.6 > OK, here is the net-2.6 based one then, thanks ! [PATCH v2] net: rfs: enable RFS before first data packet is received First packet received on a passive tcp flow is not correctly RFS steered. One sock_rps_record_flow() call is missing in inet_accept() But before that, we also must record rxhash when child socket is setup. Signed-off-by: Eric Dumazet CC: Tom Herbert CC: Ben Hutchings CC: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 9c19260..eae1f67 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -676,6 +676,7 @@ int inet_accept(struct socket *sock, struct socket *newsock, int flags) lock_sock(sk2); + sock_rps_record_flow(sk2); WARN_ON(!((1 << sk2->sk_state) & (TCPF_ESTABLISHED | TCPF_CLOSE_WAIT | TCPF_CLOSE))); diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index a7d6671..708dc20 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1589,6 +1589,7 @@ int tcp_v4_do_rcv(struct sock *sk, struct sk_buff *skb) goto discard; if (nsk != sk) { + sock_rps_save_rxhash(nsk, skb->rxhash); if (tcp_child_process(sk, nsk, skb)) { rsk = nsk; goto reset; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index d1fd287..87551ca 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1644,6 +1644,7 @@ static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb) * the new socket.. */ if(nsk != sk) { + sock_rps_save_rxhash(nsk, skb->rxhash); if (tcp_child_process(sk, nsk, skb)) goto reset; if (opt_skb) -- cgit v0.10.2 From d0fd64c1de437bdf91c32d4f84a53fa4b2150348 Mon Sep 17 00:00:00 2001 From: Pavel Shved Date: Fri, 17 Jun 2011 06:25:10 +0000 Subject: farsync: add module_put to error path in fst_open() The fst_open() function, after a successful try_module_get() may return an error code if hdlc_open() returns it. However, it does not put the module on this error path. This patch adds the necessary module_put() call. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved Signed-off-by: David S. Miller diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index e050bd6..777d1a4 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2203,8 +2203,10 @@ fst_open(struct net_device *dev) if (port->mode != FST_RAW) { err = hdlc_open(dev); - if (err) + if (err) { + module_put(THIS_MODULE); return err; + } } fst_openport(port); -- cgit v0.10.2 From 2f9381e98471837b631743270de988e78aad1f96 Mon Sep 17 00:00:00 2001 From: Pavel Shved Date: Fri, 17 Jun 2011 06:25:11 +0000 Subject: gigaset: call module_put before restart of if_open() if_open() calls try_module_get(), and after an attempt to lock a mutex the if_open() function may return -ERESTARTSYS without putting the module. Then, when if_open() is executed again, try_module_get() is called making the reference counter of THIS_MODULE greater than one at successful exit from if_open(). The if_close() function puts the module only once, and as a result it can't be unloaded. This patch adds module_put call before the return from if_open(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved Signed-off-by: David S. Miller diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index 59de638..e35058b 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -156,8 +156,10 @@ static int if_open(struct tty_struct *tty, struct file *filp) if (!cs || !try_module_get(cs->driver->owner)) return -ENODEV; - if (mutex_lock_interruptible(&cs->mutex)) + if (mutex_lock_interruptible(&cs->mutex)) { + module_put(cs->driver->owner); return -ERESTARTSYS; + } tty->driver_data = cs; ++cs->open_count; -- cgit v0.10.2 From eeb1497277d6b1a0a34ed36b97e18f2bd7d6de0d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 Jun 2011 16:25:39 -0400 Subject: inet_diag: fix inet_diag_bc_audit() A malicious user or buggy application can inject code and trigger an infinite loop in inet_diag_bc_audit() Also make sure each instruction is aligned on 4 bytes boundary, to avoid unaligned accesses. Reported-by: Dan Rosenberg Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 6ffe94c..3267d38 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -437,7 +437,7 @@ static int valid_cc(const void *bc, int len, int cc) return 0; if (cc == len) return 1; - if (op->yes < 4) + if (op->yes < 4 || op->yes & 3) return 0; len -= op->yes; bc += op->yes; @@ -447,11 +447,11 @@ static int valid_cc(const void *bc, int len, int cc) static int inet_diag_bc_audit(const void *bytecode, int bytecode_len) { - const unsigned char *bc = bytecode; + const void *bc = bytecode; int len = bytecode_len; while (len > 0) { - struct inet_diag_bc_op *op = (struct inet_diag_bc_op *)bc; + const struct inet_diag_bc_op *op = bc; //printk("BC: %d %d %d {%d} / %d\n", op->code, op->yes, op->no, op[1].no, len); switch (op->code) { @@ -462,22 +462,20 @@ static int inet_diag_bc_audit(const void *bytecode, int bytecode_len) case INET_DIAG_BC_S_LE: case INET_DIAG_BC_D_GE: case INET_DIAG_BC_D_LE: - if (op->yes < 4 || op->yes > len + 4) - return -EINVAL; case INET_DIAG_BC_JMP: - if (op->no < 4 || op->no > len + 4) + if (op->no < 4 || op->no > len + 4 || op->no & 3) return -EINVAL; if (op->no < len && !valid_cc(bytecode, bytecode_len, len - op->no)) return -EINVAL; break; case INET_DIAG_BC_NOP: - if (op->yes < 4 || op->yes > len + 4) - return -EINVAL; break; default: return -EINVAL; } + if (op->yes < 4 || op->yes > len + 4 || op->yes & 3) + return -EINVAL; bc += op->yes; len -= op->yes; } -- cgit v0.10.2 From e999376f094162aa425ae749aa1df95ab928d010 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 17 Jun 2011 16:14:09 -0400 Subject: Btrfs: avoid delayed metadata items during commits Snapshot creation has two phases. One is the initial snapshot setup, and the second is done during commit, while nobody is allowed to modify the root we are snapshotting. The delayed metadata insertion code can break that rule, it does a delayed inode update on the inode of the parent of the snapshot, and delayed directory item insertion. This makes sure to run the pending delayed operations before we record the snapshot root, which avoids corruptions. Signed-off-by: Chris Mason diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index fc515b7..f1cbd02 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -1237,6 +1237,13 @@ again: return 0; } +void btrfs_assert_delayed_root_empty(struct btrfs_root *root) +{ + struct btrfs_delayed_root *delayed_root; + delayed_root = btrfs_get_delayed_root(root); + WARN_ON(btrfs_first_delayed_node(delayed_root)); +} + void btrfs_balance_delayed_items(struct btrfs_root *root) { struct btrfs_delayed_root *delayed_root; diff --git a/fs/btrfs/delayed-inode.h b/fs/btrfs/delayed-inode.h index cb79b67..d1a6a29 100644 --- a/fs/btrfs/delayed-inode.h +++ b/fs/btrfs/delayed-inode.h @@ -137,4 +137,8 @@ int btrfs_readdir_delayed_dir_index(struct file *filp, void *dirent, /* for init */ int __init btrfs_delayed_inode_init(void); void btrfs_delayed_inode_exit(void); + +/* for debugging */ +void btrfs_assert_delayed_root_empty(struct btrfs_root *root); + #endif diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c073d85..51dcec8 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -957,6 +957,15 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, ret = btrfs_update_inode(trans, parent_root, parent_inode); BUG_ON(ret); + /* + * pull in the delayed directory update + * and the delayed inode item + * otherwise we corrupt the FS during + * snapshot + */ + ret = btrfs_run_delayed_items(trans, root); + BUG_ON(ret); + record_root_in_trans(trans, root); btrfs_set_root_last_snapshot(&root->root_item, trans->transid); memcpy(new_root_item, &root->root_item, sizeof(*new_root_item)); @@ -1018,14 +1027,6 @@ static noinline int create_pending_snapshots(struct btrfs_trans_handle *trans, int ret; list_for_each_entry(pending, head, list) { - /* - * We must deal with the delayed items before creating - * snapshots, or we will create a snapthot with inconsistent - * information. - */ - ret = btrfs_run_delayed_items(trans, fs_info->fs_root); - BUG_ON(ret); - ret = create_pending_snapshot(trans, fs_info, pending); BUG_ON(ret); } @@ -1319,15 +1320,21 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, */ mutex_lock(&root->fs_info->reloc_mutex); - ret = create_pending_snapshots(trans, root->fs_info); + ret = btrfs_run_delayed_items(trans, root); BUG_ON(ret); - ret = btrfs_run_delayed_items(trans, root); + ret = create_pending_snapshots(trans, root->fs_info); BUG_ON(ret); ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1); BUG_ON(ret); + /* + * make sure none of the code above managed to slip in a + * delayed item + */ + btrfs_assert_delayed_root_empty(root); + WARN_ON(cur_trans != trans->transaction); btrfs_scrub_pause(root); -- cgit v0.10.2 From 3744100e05c4e403ed21c99cd389c7e784664e4b Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 17 Jun 2011 22:58:54 +0200 Subject: r8169: fix static initializers. Signed-off-by: Francois Romieu diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index ef1ce2e..05d8178 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1621,7 +1621,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, * * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec */ - static const struct { + static const struct rtl_mac_info { u32 mask; u32 val; int mac_version; @@ -1689,7 +1689,8 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, /* Catch-all */ { 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE } - }, *p = mac_info; + }; + const struct rtl_mac_info *p = mac_info; u32 reg; reg = RTL_R32(TxConfig); @@ -3681,7 +3682,7 @@ static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) { - static const struct { + static const struct rtl_cfg2_info { u32 mac_version; u32 clk; u32 val; @@ -3690,7 +3691,8 @@ static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) { RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff }, { RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe { RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff } - }, *p = cfg2_info; + }; + const struct rtl_cfg2_info *p = cfg2_info; unsigned int i; u32 clk; -- cgit v0.10.2 From 650f156775c2638cc02ed7df31186a09ba79666a Mon Sep 17 00:00:00 2001 From: Jeff Ohlstein Date: Fri, 17 Jun 2011 13:55:38 -0700 Subject: msm: timer: compensate for timer shift in msm_read_timer_count Some msm targets have timers whose lower bits are unreliable. So, we present our timers as lower frequency than they actually are, and ignore the bottom 5 bits on such targets. This compensation was erroneously removed from the msm_read_timer_count function, so restore it. This was broken by 94790ec25 "msm: timer: SMP timer support for msm". Signed-off-by: Jeff Ohlstein diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 9bfdd5a..2232032 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -102,7 +102,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs) { struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource); - return readl(clk->global_counter); + /* + * Shift timer count down by a constant due to unreliable lower bits + * on some targets. + */ + return readl(clk->global_counter) >> clk->shift; } static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt) -- cgit v0.10.2 From 498e720b96379d8ee9c294950a01534a73defcf3 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Fri, 17 Jun 2011 11:32:19 -0700 Subject: drm/i915: Fix gen6 (SNB) missed BLT ring interrupts. The failure appeared in dmesg as: [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 35064155, at 35064155], missed IRQ? This works around that problem on by making the blitter command streamer write interrupt state to the Hardware Status Page when a MI_USER_INTERRUPT command is decoded, which appears to force the seqno out to memory before the interrupt happens. v1->v2: Moved to prior interrupt handler installation and RMW flags as per feedback. v2->v3: Removed RMW of flags (by anholt) Cc: stable@kernel.org Signed-off-by: Daniel J Blueman Signed-off-by: Eric Anholt Tested-by: Chris Wilson [v1] Tested-by: Eric Anholt [v1,v3] (incidence of the bug with a testcase went from avg 2/1000 to 0/12651 in the latest test run (plus more for v1)) Tested-by: Kenneth Graunke [v1] Tested-by: Robert Hooker [v1] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33394 Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index b9fafe3..9e34a1a 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1740,6 +1740,16 @@ void ironlake_irq_preinstall(struct drm_device *dev) INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work); I915_WRITE(HWSTAM, 0xeffe); + if (IS_GEN6(dev)) { + /* Workaround stalls observed on Sandy Bridge GPUs by + * making the blitter command streamer generate a + * write to the Hardware Status Page for + * MI_USER_INTERRUPT. This appears to serialize the + * previous seqno write out before the interrupt + * happens. + */ + I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT); + } /* XXX hotplug from PCH */ -- cgit v0.10.2 From bb4aa39676f73b4657b3edd893ae83881c430c0c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 16 Jun 2011 20:44:51 -0700 Subject: mm: avoid repeated anon_vma lock/unlock sequences in anon_vma_clone() In anon_vma_clone() we traverse the vma->anon_vma_chain of the source vma, locking the anon_vma for each entry. But they are all going to have the same root entry, which means that we're locking and unlocking the same lock over and over again. Which is expensive in locked operations, but can get _really_ expensive when that root entry sees any kind of lock contention. In fact, Tim Chen reports a big performance regression due to this: when we switched to use a mutex instead of a spinlock, the contention case gets much worse. So to alleviate this all, this commit creates a small helper function (lock_anon_vma_root()) that can be used to take the lock just once rather than taking and releasing it over and over again. We still have the same "take the lock and release" it behavior in the exit path (in unlink_anon_vmas()), but that one is a bit harder to fix since we're actually freeing the anon_vma entries as we go, and that will touch the lock too. Reported-and-tested-by: Tim Chen Tested-by: Hugh Dickins Cc: Peter Zijlstra Cc: Andi Kleen Signed-off-by: Linus Torvalds diff --git a/mm/rmap.c b/mm/rmap.c index 0eb463e..f286697 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -200,6 +200,32 @@ int anon_vma_prepare(struct vm_area_struct *vma) return -ENOMEM; } +/* + * This is a useful helper function for locking the anon_vma root as + * we traverse the vma->anon_vma_chain, looping over anon_vma's that + * have the same vma. + * + * Such anon_vma's should have the same root, so you'd expect to see + * just a single mutex_lock for the whole traversal. + */ +static inline struct anon_vma *lock_anon_vma_root(struct anon_vma *root, struct anon_vma *anon_vma) +{ + struct anon_vma *new_root = anon_vma->root; + if (new_root != root) { + if (WARN_ON_ONCE(root)) + mutex_unlock(&root->mutex); + root = new_root; + mutex_lock(&root->mutex); + } + return root; +} + +static inline void unlock_anon_vma_root(struct anon_vma *root) +{ + if (root) + mutex_unlock(&root->mutex); +} + static void anon_vma_chain_link(struct vm_area_struct *vma, struct anon_vma_chain *avc, struct anon_vma *anon_vma) @@ -208,13 +234,11 @@ static void anon_vma_chain_link(struct vm_area_struct *vma, avc->anon_vma = anon_vma; list_add(&avc->same_vma, &vma->anon_vma_chain); - anon_vma_lock(anon_vma); /* * It's critical to add new vmas to the tail of the anon_vma, * see comment in huge_memory.c:__split_huge_page(). */ list_add_tail(&avc->same_anon_vma, &anon_vma->head); - anon_vma_unlock(anon_vma); } /* @@ -224,16 +248,23 @@ static void anon_vma_chain_link(struct vm_area_struct *vma, int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src) { struct anon_vma_chain *avc, *pavc; + struct anon_vma *root = NULL; list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) { + struct anon_vma *anon_vma; + avc = anon_vma_chain_alloc(); if (!avc) goto enomem_failure; - anon_vma_chain_link(dst, avc, pavc->anon_vma); + anon_vma = pavc->anon_vma; + root = lock_anon_vma_root(root, anon_vma); + anon_vma_chain_link(dst, avc, anon_vma); } + unlock_anon_vma_root(root); return 0; enomem_failure: + unlock_anon_vma_root(root); unlink_anon_vmas(dst); return -ENOMEM; } @@ -280,7 +311,9 @@ int anon_vma_fork(struct vm_area_struct *vma, struct vm_area_struct *pvma) get_anon_vma(anon_vma->root); /* Mark this anon_vma as the one where our new (COWed) pages go. */ vma->anon_vma = anon_vma; + anon_vma_lock(anon_vma); anon_vma_chain_link(vma, avc, anon_vma); + anon_vma_unlock(anon_vma); return 0; -- cgit v0.10.2 From eee2acbae95555006307395d8a6c91452d62851d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 17 Jun 2011 13:54:23 +0200 Subject: mm: avoid repeated anon_vma lock/unlock sequences in unlink_anon_vmas() This matches the anon_vma_clone() case, and uses the same lock helper functions. Because of the need to potentially release the anon_vma's, it's a bit more complex, though. We traverse the 'vma->anon_vma_chain' in two phases: the first loop gets the anon_vma lock (with the helper function that only takes the lock once for the whole loop), and removes any entries that don't need any more processing. The second phase just traverses the remaining list entries (without holding the anon_vma lock), and does any actual freeing of the anon_vma's that is required. Signed-off-by: Peter Zijlstra Tested-by: Hugh Dickins Tested-by: Tim Chen Cc: Andi Kleen Signed-off-by: Linus Torvalds diff --git a/mm/rmap.c b/mm/rmap.c index f286697..68756a7 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -324,36 +324,43 @@ int anon_vma_fork(struct vm_area_struct *vma, struct vm_area_struct *pvma) return -ENOMEM; } -static void anon_vma_unlink(struct anon_vma_chain *anon_vma_chain) -{ - struct anon_vma *anon_vma = anon_vma_chain->anon_vma; - int empty; - - /* If anon_vma_fork fails, we can get an empty anon_vma_chain. */ - if (!anon_vma) - return; - - anon_vma_lock(anon_vma); - list_del(&anon_vma_chain->same_anon_vma); - - /* We must garbage collect the anon_vma if it's empty */ - empty = list_empty(&anon_vma->head); - anon_vma_unlock(anon_vma); - - if (empty) - put_anon_vma(anon_vma); -} - void unlink_anon_vmas(struct vm_area_struct *vma) { struct anon_vma_chain *avc, *next; + struct anon_vma *root = NULL; /* * Unlink each anon_vma chained to the VMA. This list is ordered * from newest to oldest, ensuring the root anon_vma gets freed last. */ list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) { - anon_vma_unlink(avc); + struct anon_vma *anon_vma = avc->anon_vma; + + root = lock_anon_vma_root(root, anon_vma); + list_del(&avc->same_anon_vma); + + /* + * Leave empty anon_vmas on the list - we'll need + * to free them outside the lock. + */ + if (list_empty(&anon_vma->head)) + continue; + + list_del(&avc->same_vma); + anon_vma_chain_free(avc); + } + unlock_anon_vma_root(root); + + /* + * Iterate the list once more, it now only contains empty and unlinked + * anon_vmas, destroy them. Could not do before due to __put_anon_vma() + * needing to acquire the anon_vma->root->mutex. + */ + list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) { + struct anon_vma *anon_vma = avc->anon_vma; + + put_anon_vma(anon_vma); + list_del(&avc->same_vma); anon_vma_chain_free(avc); } -- cgit v0.10.2 From dd34739c03f2f9a79403d33419c2e61e11b4c403 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 17 Jun 2011 19:05:36 -0700 Subject: mm: avoid anon_vma_chain allocation under anon_vma lock Hugh Dickins points out that lockdep (correctly) spots a potential deadlock on the anon_vma lock, because we now do a GFP_KERNEL allocation of anon_vma_chain while doing anon_vma_clone(). The problem is that page reclaim will want to take the anon_vma lock of any anonymous pages that it will try to reclaim. So re-organize the code in anon_vma_clone() slightly: first do just a GFP_NOWAIT allocation, which will usually work fine. But if that fails, let's just drop the lock and re-do the allocation, now with GFP_KERNEL. End result: not only do we avoid the locking problem, this also ends up getting better concurrency in case the allocation does need to block. Tim Chen reports that with all these anon_vma locking tweaks, we're now almost back up to the spinlock performance. Reported-and-tested-by: Hugh Dickins Tested-by: Tim Chen Cc: Peter Zijlstra Cc: Andi Kleen Signed-off-by: Linus Torvalds diff --git a/mm/rmap.c b/mm/rmap.c index 68756a7..27dfd3b 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -112,9 +112,9 @@ static inline void anon_vma_free(struct anon_vma *anon_vma) kmem_cache_free(anon_vma_cachep, anon_vma); } -static inline struct anon_vma_chain *anon_vma_chain_alloc(void) +static inline struct anon_vma_chain *anon_vma_chain_alloc(gfp_t gfp) { - return kmem_cache_alloc(anon_vma_chain_cachep, GFP_KERNEL); + return kmem_cache_alloc(anon_vma_chain_cachep, gfp); } static void anon_vma_chain_free(struct anon_vma_chain *anon_vma_chain) @@ -159,7 +159,7 @@ int anon_vma_prepare(struct vm_area_struct *vma) struct mm_struct *mm = vma->vm_mm; struct anon_vma *allocated; - avc = anon_vma_chain_alloc(); + avc = anon_vma_chain_alloc(GFP_KERNEL); if (!avc) goto out_enomem; @@ -253,9 +253,14 @@ int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src) list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) { struct anon_vma *anon_vma; - avc = anon_vma_chain_alloc(); - if (!avc) - goto enomem_failure; + avc = anon_vma_chain_alloc(GFP_NOWAIT | __GFP_NOWARN); + if (unlikely(!avc)) { + unlock_anon_vma_root(root); + root = NULL; + avc = anon_vma_chain_alloc(GFP_KERNEL); + if (!avc) + goto enomem_failure; + } anon_vma = pavc->anon_vma; root = lock_anon_vma_root(root, anon_vma); anon_vma_chain_link(dst, avc, anon_vma); @@ -264,7 +269,6 @@ int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src) return 0; enomem_failure: - unlock_anon_vma_root(root); unlink_anon_vmas(dst); return -ENOMEM; } @@ -294,7 +298,7 @@ int anon_vma_fork(struct vm_area_struct *vma, struct vm_area_struct *pvma) anon_vma = anon_vma_alloc(); if (!anon_vma) goto out_error; - avc = anon_vma_chain_alloc(); + avc = anon_vma_chain_alloc(GFP_KERNEL); if (!avc) goto out_error_free_anon_vma; -- cgit v0.10.2 From 0897554cdd9de8a9f6f93d9ba27c7ebfae286158 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 14 Jun 2011 10:16:17 +1000 Subject: drm/nouveau: fix big-endian switch Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 8021888..144f79a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -881,8 +881,8 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) #ifdef __BIG_ENDIAN /* Put the card in BE mode if it's not */ - if (nv_rd32(dev, NV03_PMC_BOOT_1)) - nv_wr32(dev, NV03_PMC_BOOT_1, 0x00000001); + if (nv_rd32(dev, NV03_PMC_BOOT_1) != 0x01000001) + nv_wr32(dev, NV03_PMC_BOOT_1, 0x01000001); DRM_MEMORYBARRIER(); #endif -- cgit v0.10.2 From 2905544073f6ec235b44f624c66f52b61221a16c Mon Sep 17 00:00:00 2001 From: Emil Velikov Date: Sat, 11 Jun 2011 13:30:32 +0100 Subject: drm/nouveau/pm: Prevent overflow in nouveau_perf_init() While parsing the perf table, there is no check if the num of entries read from the vbios is less than the currently allocated number. In case of a buggy vbios this will cause overwriting of kernel memory, causing aditional problems. Add a simple check in order to prevent the case Signed-off-by: Emil Velikov Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c index 922fb6b..ef9dec0 100644 --- a/drivers/gpu/drm/nouveau/nouveau_perf.c +++ b/drivers/gpu/drm/nouveau/nouveau_perf.c @@ -182,6 +182,11 @@ nouveau_perf_init(struct drm_device *dev) entries = perf[2]; } + if (entries > NOUVEAU_PM_MAX_LEVEL) { + NV_DEBUG(dev, "perf table has too many entries - buggy vbios?\n"); + entries = NOUVEAU_PM_MAX_LEVEL; + } + entry = perf + headerlen; for (i = 0; i < entries; i++) { struct nouveau_pm_level *perflvl = &pm->perflvl[pm->nr_perflvl]; -- cgit v0.10.2 From f66b3d5540994cb92182312be24944864cec5a16 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Thu, 16 Jun 2011 14:40:27 +1000 Subject: drm/nv50/disp: fix gamma with page flipping overlay turned on Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 74a3f68..08da478 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -409,7 +409,7 @@ nv50_display_flip_next(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct nouveau_channel *evo = dispc->sync; int ret; - ret = RING_SPACE(evo, 24); + ret = RING_SPACE(evo, chan ? 25 : 27); if (unlikely(ret)) return ret; @@ -458,8 +458,19 @@ nv50_display_flip_next(struct drm_crtc *crtc, struct drm_framebuffer *fb, /* queue the flip on the crtc's "display sync" channel */ BEGIN_RING(evo, 0, 0x0100, 1); OUT_RING (evo, 0xfffe0000); - BEGIN_RING(evo, 0, 0x0084, 5); - OUT_RING (evo, chan ? 0x00000100 : 0x00000010); + if (chan) { + BEGIN_RING(evo, 0, 0x0084, 1); + OUT_RING (evo, 0x00000100); + } else { + BEGIN_RING(evo, 0, 0x0084, 1); + OUT_RING (evo, 0x00000010); + /* allows gamma somehow, PDISP will bitch at you if + * you don't wait for vblank before changing this.. + */ + BEGIN_RING(evo, 0, 0x00e0, 1); + OUT_RING (evo, 0x40000000); + } + BEGIN_RING(evo, 0, 0x0088, 4); OUT_RING (evo, dispc->sem.offset); OUT_RING (evo, 0xf00d0000 | dispc->sem.value); OUT_RING (evo, 0x74b1e000); -- cgit v0.10.2 From b16a5a18ff994532120c1d18e678bbc5fb477b62 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 17 Jun 2011 23:41:54 +1000 Subject: drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync The DDX modifies DMA_SEMAPHORE on nv50 in order to implement sync-to-vblank, things will go very wrong for cross-channel sync after this. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c index 4b9f449..7347075 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fence.c +++ b/drivers/gpu/drm/nouveau/nouveau_fence.c @@ -339,11 +339,12 @@ semaphore_acquire(struct nouveau_channel *chan, struct nouveau_semaphore *sema) int ret; if (dev_priv->chipset < 0x84) { - ret = RING_SPACE(chan, 3); + ret = RING_SPACE(chan, 4); if (ret) return ret; - BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 2); + BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 3); + OUT_RING (chan, NvSema); OUT_RING (chan, sema->mem->start); OUT_RING (chan, 1); } else @@ -351,10 +352,12 @@ semaphore_acquire(struct nouveau_channel *chan, struct nouveau_semaphore *sema) struct nouveau_vma *vma = &dev_priv->fence.bo->vma; u64 offset = vma->offset + sema->mem->start; - ret = RING_SPACE(chan, 5); + ret = RING_SPACE(chan, 7); if (ret) return ret; + BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1); + OUT_RING (chan, chan->vram_handle); BEGIN_RING(chan, NvSubSw, 0x0010, 4); OUT_RING (chan, upper_32_bits(offset)); OUT_RING (chan, lower_32_bits(offset)); @@ -394,11 +397,12 @@ semaphore_release(struct nouveau_channel *chan, struct nouveau_semaphore *sema) int ret; if (dev_priv->chipset < 0x84) { - ret = RING_SPACE(chan, 4); + ret = RING_SPACE(chan, 5); if (ret) return ret; - BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 1); + BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 2); + OUT_RING (chan, NvSema); OUT_RING (chan, sema->mem->start); BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_RELEASE, 1); OUT_RING (chan, 1); @@ -407,10 +411,12 @@ semaphore_release(struct nouveau_channel *chan, struct nouveau_semaphore *sema) struct nouveau_vma *vma = &dev_priv->fence.bo->vma; u64 offset = vma->offset + sema->mem->start; - ret = RING_SPACE(chan, 5); + ret = RING_SPACE(chan, 7); if (ret) return ret; + BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1); + OUT_RING (chan, chan->vram_handle); BEGIN_RING(chan, NvSubSw, 0x0010, 4); OUT_RING (chan, upper_32_bits(offset)); OUT_RING (chan, lower_32_bits(offset)); @@ -504,22 +510,22 @@ nouveau_fence_channel_init(struct nouveau_channel *chan) struct nouveau_gpuobj *obj = NULL; int ret; - if (dev_priv->card_type >= NV_C0) - goto out_initialised; + if (dev_priv->card_type < NV_C0) { + /* Create an NV_SW object for various sync purposes */ + ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW); + if (ret) + return ret; - /* Create an NV_SW object for various sync purposes */ - ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW); - if (ret) - return ret; + ret = RING_SPACE(chan, 2); + if (ret) + return ret; - /* we leave subchannel empty for nvc0 */ - ret = RING_SPACE(chan, 2); - if (ret) - return ret; - BEGIN_RING(chan, NvSubSw, 0, 1); - OUT_RING(chan, NvSw); + BEGIN_RING(chan, NvSubSw, 0, 1); + OUT_RING (chan, NvSw); + FIRE_RING (chan); + } - /* Create a DMA object for the shared cross-channel sync area. */ + /* Setup area of memory shared between all channels for x-chan sync */ if (USE_SEMA(dev) && dev_priv->chipset < 0x84) { struct ttm_mem_reg *mem = &dev_priv->fence.bo->bo.mem; @@ -534,23 +540,8 @@ nouveau_fence_channel_init(struct nouveau_channel *chan) nouveau_gpuobj_ref(NULL, &obj); if (ret) return ret; - - ret = RING_SPACE(chan, 2); - if (ret) - return ret; - BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1); - OUT_RING(chan, NvSema); - } else { - ret = RING_SPACE(chan, 2); - if (ret) - return ret; - BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1); - OUT_RING (chan, chan->vram_handle); /* whole VM */ } - FIRE_RING(chan); - -out_initialised: INIT_LIST_HEAD(&chan->fence.pending); spin_lock_init(&chan->fence.lock); atomic_set(&chan->fence.last_sequence_irq, 0); -- cgit v0.10.2 From 808b4e639eb00394de9989fabca23196c337ee75 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 7 Jun 2011 15:14:26 -0400 Subject: hwmon: (coretemp) Drop unused struct members pdev_entry.cpu and pdev_entry.cpu_core_id aren't used anywhere in the driver code so we can drop these struct members. Signed-off-by: Jean Delvare Cc: Fenghua Yu Cc: Guenter Roeck Cc: Durgadoss R Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 85e9379..0070d54 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -97,9 +97,7 @@ struct platform_data { struct pdev_entry { struct list_head list; struct platform_device *pdev; - unsigned int cpu; u16 phys_proc_id; - u16 cpu_core_id; }; static LIST_HEAD(pdev_list); @@ -653,9 +651,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu) } pdev_entry->pdev = pdev; - pdev_entry->cpu = cpu; pdev_entry->phys_proc_id = TO_PHYS_ID(cpu); - pdev_entry->cpu_core_id = TO_CORE_ID(cpu); list_add_tail(&pdev_entry->list, &pdev_list); mutex_unlock(&pdev_list_mutex); -- cgit v0.10.2 From 9a2d55be1168b56a5c65321dcce64c97798eaec7 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 24 May 2011 12:19:05 -0700 Subject: hwmon: (asus_atk0110) Consolidate sysfs attribute initialization Call sysfs_attr_init() from atk_init_attribute() to handle sysfs attribute initialization in a single function. Signed-off-by: Guenter Roeck Cc: Luca Tettamanti Acked-by: Jean Delvare diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index b5e8920..dcb78a7 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -268,6 +268,7 @@ static struct device_attribute atk_name_attr = static void atk_init_attribute(struct device_attribute *attr, char *name, sysfs_show_func show) { + sysfs_attr_init(&attr->attr); attr->attr.name = name; attr->attr.mode = 0444; attr->show = show; @@ -1188,19 +1189,15 @@ static int atk_create_files(struct atk_data *data) int err; list_for_each_entry(s, &data->sensor_list, list) { - sysfs_attr_init(&s->input_attr.attr); err = device_create_file(data->hwmon_dev, &s->input_attr); if (err) return err; - sysfs_attr_init(&s->label_attr.attr); err = device_create_file(data->hwmon_dev, &s->label_attr); if (err) return err; - sysfs_attr_init(&s->limit1_attr.attr); err = device_create_file(data->hwmon_dev, &s->limit1_attr); if (err) return err; - sysfs_attr_init(&s->limit2_attr.attr); err = device_create_file(data->hwmon_dev, &s->limit2_attr); if (err) return err; -- cgit v0.10.2 From 3cdb2052a6e365ad56202874e6a8a05a2bb336fc Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 24 May 2011 12:33:26 -0700 Subject: hwmon: (ibmaem) Initialize sysfs attributes Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Cc: stable@kernel.org # 2.6.34+ diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 537409d..1a409c5 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -947,6 +947,7 @@ static int aem_register_sensors(struct aem_data *data, /* Set up read-only sensors */ while (ro->label) { + sysfs_attr_init(&sensors->dev_attr.attr); sensors->dev_attr.attr.name = ro->label; sensors->dev_attr.attr.mode = S_IRUGO; sensors->dev_attr.show = ro->show; @@ -963,6 +964,7 @@ static int aem_register_sensors(struct aem_data *data, /* Set up read-write sensors */ while (rw->label) { + sysfs_attr_init(&sensors->dev_attr.attr); sensors->dev_attr.attr.name = rw->label; sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR; sensors->dev_attr.show = rw->show; -- cgit v0.10.2 From fb794e0f7153918c33f2300986d995524ab711cf Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 24 May 2011 12:34:12 -0700 Subject: hwmon: (ibmpex) Initialize sysfs attributes Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Cc: stable@kernel.org # 2.6.34+ diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c index 06d4eaf..41dbf81 100644 --- a/drivers/hwmon/ibmpex.c +++ b/drivers/hwmon/ibmpex.c @@ -358,6 +358,7 @@ static int create_sensor(struct ibmpex_bmc_data *data, int type, else if (type == POWER_SENSOR) sprintf(n, power_sensor_name_templates[func], "power", counter); + sysfs_attr_init(&data->sensors[sensor].attr[func].dev_attr.attr); data->sensors[sensor].attr[func].dev_attr.attr.name = n; data->sensors[sensor].attr[func].dev_attr.attr.mode = S_IRUGO; data->sensors[sensor].attr[func].dev_attr.show = ibmpex_show_sensor; -- cgit v0.10.2 From b1e698db0939b04602ded2a2196ff69c92b49378 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 24 May 2011 12:34:55 -0700 Subject: hwmon: (s3c) Initialize sysfs attributes Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Cc: stable@kernel.org # 2.6.34+ diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index 92b42db..b39f52e 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -232,6 +232,7 @@ static int s3c_hwmon_create_attr(struct device *dev, attr = &attrs->in; attr->index = channel; + sysfs_attr_init(&attr->dev_attr.attr); attr->dev_attr.attr.name = attrs->in_name; attr->dev_attr.attr.mode = S_IRUGO; attr->dev_attr.show = s3c_hwmon_ch_show; @@ -249,6 +250,7 @@ static int s3c_hwmon_create_attr(struct device *dev, attr = &attrs->label; attr->index = channel; + sysfs_attr_init(&attr->dev_attr.attr); attr->dev_attr.attr.name = attrs->label_name; attr->dev_attr.attr.mode = S_IRUGO; attr->dev_attr.show = s3c_hwmon_label_show; -- cgit v0.10.2 From da40b0b6b4d3a81c5051fe6ae0544c48c13261c4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 18 Jun 2011 02:50:11 -0700 Subject: Input: evdev - try to wake up readers only if we have full packet We should only wake waiters on the event device when we actually post an EV_SYN/SYN_REPORT to the queue. Otherwise we end up making waiting threads runnable only to go right back to sleep because the device still isn't readable. Reported-by: Jeffrey Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index be0921e..4cf2534 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -111,7 +111,8 @@ static void evdev_event(struct input_handle *handle, rcu_read_unlock(); - wake_up_interruptible(&evdev->wait); + if (type == EV_SYN && code == SYN_REPORT) + wake_up_interruptible(&evdev->wait); } static int evdev_fasync(int fd, struct file *file, int on) -- cgit v0.10.2 From b27af563befa95686c8d1abc491408aa6b9a31dc Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 15 Jun 2011 21:13:55 -0700 Subject: Input: omap-keypad - add missing input_sync() Otherwise the updated evdev driver (commit cdda911c34006f1089f3c87b1a1f, "Input: evdev - only signal polls on full packets") no longer works on top of omap-keypad. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index f23a743..33d0bdc 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -209,6 +209,7 @@ static void omap_kp_tasklet(unsigned long data) #endif } } + input_sync(omap_kp_data->input); memcpy(keypad_state, new_state, sizeof(keypad_state)); if (key_down) { -- cgit v0.10.2 From cca23d0b5350c9ca0473625c3f5879422ba534a6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 18 Jun 2011 02:51:52 -0700 Subject: Input: sh_keysc - 8x8 MODE_6 fix According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys. Bump up MAXKEYS to 64 too. Signed-off-by: Magnus Damm Reviewed-by: Simon Horman Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index 834cf98..6876700 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -32,7 +32,7 @@ static const struct { [SH_KEYSC_MODE_3] = { 2, 4, 7 }, [SH_KEYSC_MODE_4] = { 3, 6, 6 }, [SH_KEYSC_MODE_5] = { 4, 6, 7 }, - [SH_KEYSC_MODE_6] = { 5, 7, 7 }, + [SH_KEYSC_MODE_6] = { 5, 8, 8 }, }; struct sh_keysc_priv { diff --git a/include/linux/input/sh_keysc.h b/include/linux/input/sh_keysc.h index 649dc7f..5d253cd 100644 --- a/include/linux/input/sh_keysc.h +++ b/include/linux/input/sh_keysc.h @@ -1,7 +1,7 @@ #ifndef __SH_KEYSC_H__ #define __SH_KEYSC_H__ -#define SH_KEYSC_MAXKEYS 49 +#define SH_KEYSC_MAXKEYS 64 struct sh_keysc_info { enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3, -- cgit v0.10.2 From c11760c6d80ab6aa20e383cf378a7287305f591c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 8 Jun 2011 10:30:03 -0700 Subject: isofs: fix bh leak in isofs_fill_super() error case MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In isofs_fill_super(), when an iso_primary_descriptor is found, it is kept in pri_bh. The error cases don't properly release it. Fix it. Reported-and-tested-by: 김원석 Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c index 3db5ba4..b3cc858 100644 --- a/fs/isofs/inode.c +++ b/fs/isofs/inode.c @@ -974,7 +974,7 @@ out_no_inode: out_no_read: printk(KERN_WARNING "%s: bread failed, dev=%s, iso_blknum=%d, block=%d\n", __func__, s->s_id, iso_blknum, block); - goto out_freesbi; + goto out_freebh; out_bad_zone_size: printk(KERN_WARNING "ISOFS: Bad logical zone size %ld\n", sbi->s_log_zone_size); @@ -989,6 +989,7 @@ out_unknown_format: out_freebh: brelse(bh); + brelse(pri_bh); out_freesbi: kfree(opt.iocharset); kfree(sbi); -- cgit v0.10.2 From 9aa3c94ce59066f545521033007abb6441706068 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 18 Jun 2011 11:59:18 -0700 Subject: ipv4: fix multicast losses Knut Tidemann found that first packet of a multicast flow was not correctly received, and bisected the regression to commit b23dd4fe42b4 (Make output route lookup return rtable directly.) Special thanks to Knut, who provided a very nice bug report, including sample programs to demonstrate the bug. Reported-and-bisectedby: Knut Tidemann Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 045f0ec..aa13ef1 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1902,9 +1902,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr, hash = rt_hash(daddr, saddr, dev->ifindex, rt_genid(dev_net(dev))); rth = rt_intern_hash(hash, rth, skb, dev->ifindex); - err = 0; - if (IS_ERR(rth)) - err = PTR_ERR(rth); + return IS_ERR(rth) ? PTR_ERR(rth) : 0; e_nobufs: return -ENOBUFS; -- cgit v0.10.2 From 7d68dc3f1003a38948c55c803c32d1989dd49198 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Tue, 14 Jun 2011 19:53:09 +0200 Subject: x86, efi: Do not reserve boot services regions within reserved areas Commit 916f676f8dc started reserving boot service code since some systems require you to keep that code around until SetVirtualAddressMap is called. However, in some cases those areas will overlap with reserved regions. The proper medium-term fix is to fix the bootloader to prevent the conflicts from occurring by moving the kernel to a better position, but the kernel should check for this possibility, and only reserve regions which can be reserved. Signed-off-by: Maarten Lankhorst Link: http://lkml.kernel.org/r/4DF7A005.1050407@gmail.com Acked-by: Matthew Garrett Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h index 19ae14b..0cd3800 100644 --- a/arch/x86/include/asm/memblock.h +++ b/arch/x86/include/asm/memblock.h @@ -4,7 +4,6 @@ #define ARCH_DISCARD_MEMBLOCK u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align); -void memblock_x86_to_bootmem(u64 start, u64 end); void memblock_x86_reserve_range(u64 start, u64 end, char *name); void memblock_x86_free_range(u64 start, u64 end); @@ -19,5 +18,6 @@ u64 memblock_x86_hole_size(u64 start, u64 end); u64 memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align); u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit); u64 memblock_x86_memory_in_range(u64 addr, u64 limit); +bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align); #endif diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c index aa11693..992da5e 100644 --- a/arch/x86/mm/memblock.c +++ b/arch/x86/mm/memblock.c @@ -8,7 +8,7 @@ #include /* Check for already reserved areas */ -static bool __init check_with_memblock_reserved_size(u64 *addrp, u64 *sizep, u64 align) +bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align) { struct memblock_region *r; u64 addr = *addrp, last; @@ -59,7 +59,7 @@ u64 __init memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align) if (addr >= ei_last) continue; *sizep = ei_last - addr; - while (check_with_memblock_reserved_size(&addr, sizep, align)) + while (memblock_x86_check_reserved_size(&addr, sizep, align)) ; if (*sizep) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 0d3a4fa..474356b 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -310,14 +310,31 @@ void __init efi_reserve_boot_services(void) for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { efi_memory_desc_t *md = p; - unsigned long long start = md->phys_addr; - unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; + u64 start = md->phys_addr; + u64 size = md->num_pages << EFI_PAGE_SHIFT; if (md->type != EFI_BOOT_SERVICES_CODE && md->type != EFI_BOOT_SERVICES_DATA) continue; - - memblock_x86_reserve_range(start, start + size, "EFI Boot"); + /* Only reserve where possible: + * - Not within any already allocated areas + * - Not over any memory area (really needed, if above?) + * - Not within any part of the kernel + * - Not the bios reserved area + */ + if ((start+size >= virt_to_phys(_text) + && start <= virt_to_phys(_end)) || + !e820_all_mapped(start, start+size, E820_RAM) || + memblock_x86_check_reserved_size(&start, &size, + 1<num_pages = 0; + memblock_dbg(PFX "Could not reserve boot range " + "[0x%010llx-0x%010llx]\n", + start, start+size-1); + } else + memblock_x86_reserve_range(start, start+size, + "EFI Boot"); } } @@ -334,6 +351,10 @@ static void __init efi_free_boot_services(void) md->type != EFI_BOOT_SERVICES_DATA) continue; + /* Could not reserve boot area */ + if (!size) + continue; + free_bootmem_late(start, size); } } -- cgit v0.10.2 From c1f5c54b57341e872a9d375dccef7257f86033ef Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 18 Jun 2011 22:51:13 +0200 Subject: x86, MAINTAINERS: Add x86 MCE people Announce the new x86 MCE infrastructure maintainers. Acked-by: Borislav Petkov Acked-by: Tony Luck Acked-by: H. Peter Anvin Acked-by: Thomas Gleixner Link: http://lkml.kernel.org/n/tip-8hs7yob6wib4vblmrmbpbav4@git.kernel.org Signed-off-by: Ingo Molnar diff --git a/MAINTAINERS b/MAINTAINERS index 502f2dd..b12b8c1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7007,6 +7007,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86. S: Maintained F: drivers/platform/x86 +X86 MCE INFRASTRUCTURE +M: Tony Luck +M: Borislav Petkov +L: linux-edac@vger.kernel.org +S: Maintained +F: arch/x86/kernel/cpu/mcheck/* + XEN HYPERVISOR INTERFACE M: Jeremy Fitzhardinge M: Konrad Rzeszutek Wilk -- cgit v0.10.2 From c44048dea28b3febd38417f36f7b2924d93f9bb2 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Thu, 26 May 2011 23:15:49 -0400 Subject: mmc: vub300: fix null dereferences in error handling Reported-by: Dan Carpenter Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index cbb0330..d4455ff 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2096,7 +2096,7 @@ static struct mmc_host_ops vub300_mmc_ops = { static int vub300_probe(struct usb_interface *interface, const struct usb_device_id *id) { /* NOT irq */ - struct vub300_mmc_host *vub300 = NULL; + struct vub300_mmc_host *vub300; struct usb_host_interface *iface_desc; struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); int i; @@ -2118,23 +2118,20 @@ static int vub300_probe(struct usb_interface *interface, command_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!command_out_urb) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the command_out_urb\n"); + dev_err(&udev->dev, "not enough memory for command_out_urb\n"); goto error0; } command_res_urb = usb_alloc_urb(0, GFP_KERNEL); if (!command_res_urb) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the command_res_urb\n"); + dev_err(&udev->dev, "not enough memory for command_res_urb\n"); goto error1; } /* this also allocates memory for our VUB300 mmc host device */ mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev); if (!mmc) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the mmc_host\n"); + dev_err(&udev->dev, "not enough memory for the mmc_host\n"); goto error4; } /* MMC core transfer sizes tunable parameters */ -- cgit v0.10.2 From b9c350a0a9d3564d20f5301f472b8841f8934c7d Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Tue, 24 May 2011 21:03:22 +0800 Subject: mmc: of_mmc_spi: add NO_IRQ define to of_mmc_spi.c Provide a dummy value of NO_IRQ for architectures that don't support it (such as MIPS). Fixes the build error for MIPS. Signed-off-by: Wanlong Gao Acked-by: Grant Likely Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index e2aecb7..ab66f24 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -25,6 +25,11 @@ #include #include +/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */ +#ifndef NO_IRQ +#define NO_IRQ 0 +#endif + MODULE_LICENSE("GPL"); enum { -- cgit v0.10.2 From 742a0c7cae9bd0f913c71722289b8ec862d70a2b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 27 May 2011 16:54:05 +0200 Subject: mmc: sdhi: fix module unloading MMC host drivers must be able to process interrupts during mmc_remove_host(). Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index b365429..2353bb7 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -165,13 +165,14 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev) p->pdata = NULL; + tmio_mmc_host_remove(host); + for (i = 0; i < 3; i++) { irq = platform_get_irq(pdev, i); if (irq >= 0) free_irq(irq, host); } - tmio_mmc_host_remove(host); clk_disable(priv->clk); clk_put(priv->clk); kfree(priv); -- cgit v0.10.2 From be98ca652faa6468916a9b7608befff215a8ca70 Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Thu, 26 May 2011 11:19:05 -0500 Subject: mmc: Add PCI fixup quirks for Ricoh 1180:e823 reader Signed-off-by: Manoj Iyer Cc: Signed-off-by: Chris Ball diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e8a1406..02145e9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2761,6 +2761,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); #endif /*CONFIG_MMC_RICOH_MMC*/ #if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index a311008..f8910e1 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1537,6 +1537,7 @@ #define PCI_DEVICE_ID_RICOH_RL5C476 0x0476 #define PCI_DEVICE_ID_RICOH_RL5C478 0x0478 #define PCI_DEVICE_ID_RICOH_R5C822 0x0822 +#define PCI_DEVICE_ID_RICOH_R5CE823 0xe823 #define PCI_DEVICE_ID_RICOH_R5C832 0x0832 #define PCI_DEVICE_ID_RICOH_R5C843 0x0843 -- cgit v0.10.2 From b72336355bb4c92d4a2be3f975dbea47089c83c1 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 30 May 2011 22:11:17 +0200 Subject: KVM: MMU: Fix build warnings in walk_addr_generic() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On 3.0-rc1 I get In file included from arch/x86/kvm/mmu.c:2856: arch/x86/kvm/paging_tmpl.h: In function ‘paging32_walk_addr_generic’: arch/x86/kvm/paging_tmpl.h:124: warning: ‘ptep_user’ may be used uninitialized in this function In file included from arch/x86/kvm/mmu.c:2852: arch/x86/kvm/paging_tmpl.h: In function ‘paging64_walk_addr_generic’: arch/x86/kvm/paging_tmpl.h:124: warning: ‘ptep_user’ may be used uninitialized in this function caused by 6e2ca7d1802bf8ed9908435e34daa116662e7790. According to Takuya Yoshikawa, ptep_user won't be used uninitialized so shut up gcc. Cc: Takuya Yoshikawa Link: http://lkml.kernel.org/r/20110530094604.GC21833@liondog.tnic Signed-off-by: Borislav Petkov Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 6c4dc01..9d03ad4 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -121,7 +121,7 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker, gva_t addr, u32 access) { pt_element_t pte; - pt_element_t __user *ptep_user; + pt_element_t __user *uninitialized_var(ptep_user); gfn_t table_gfn; unsigned index, pt_access, uninitialized_var(pte_access); gpa_t pte_gpa; -- cgit v0.10.2 From 5233dd51ece1615d54ab96c4cbe9ac3cc595e955 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Mon, 6 Jun 2011 14:27:47 -0300 Subject: KVM: VMX: do not overwrite uptodate vcpu->arch.cr3 on KVM_SET_SREGS Only decache guest CR3 value if vcpu->arch.cr3 is stale. Fixes loadvm with live guest. Signed-off-by: Marcelo Tosatti Tested-by: Markus Schade Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 4c3fa0f..d48ec60 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2047,7 +2047,8 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0, unsigned long cr0, struct kvm_vcpu *vcpu) { - vmx_decache_cr3(vcpu); + if (!test_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail)) + vmx_decache_cr3(vcpu); if (!(cr0 & X86_CR0_PG)) { /* From paging/starting to nonpaging */ vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, -- cgit v0.10.2 From a0a8eaba1661232f094654422bdabe2df4e26863 Mon Sep 17 00:00:00 2001 From: Steve Date: Fri, 17 Jun 2011 10:25:39 +0800 Subject: KVM: MMU: fix opposite condition in mapping_level_dirty_bitmap The condition is opposite, it always maps huge page for the dirty tracked page Reported-by: Steve Signed-off-by: Steve Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index bd14bb4..aee3862 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -565,7 +565,7 @@ gfn_to_memslot_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t gfn, static bool mapping_level_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t large_gfn) { - return gfn_to_memslot_dirty_bitmap(vcpu, large_gfn, true); + return !gfn_to_memslot_dirty_bitmap(vcpu, large_gfn, true); } static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn) -- cgit v0.10.2 From de2d1a524e94a79078d9fe22c57c0c6009237547 Mon Sep 17 00:00:00 2001 From: Zachary Amsden Date: Wed, 15 Jun 2011 20:50:04 -0700 Subject: KVM: Fix register corruption in pvclock_scale_delta The 128-bit multiply in pvclock.h was missing an output constraint for EDX which caused a register corruption to appear. Thanks to Ulrich for diagnosing the EDX corruption and Avi for providing this fix. Signed-off-by: Zachary Amsden Signed-off-by: Avi Kivity diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index 31d84ac..a518c0a 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -22,6 +22,8 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift) u64 product; #ifdef __i386__ u32 tmp1, tmp2; +#else + ulong tmp; #endif if (shift < 0) @@ -42,8 +44,11 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift) : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); #elif defined(__x86_64__) __asm__ ( - "mul %%rdx ; shrd $32,%%rdx,%%rax" - : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); + "mul %[mul_frac] ; shrd $32, %[hi], %[lo]" + : [lo]"=a"(product), + [hi]"=d"(tmp) + : "0"(delta), + [mul_frac]"rm"((u64)mul_frac)); #else #error implement me! #endif -- cgit v0.10.2 From df18d127f4fed7a0284bcfa8d2843800cdb63b72 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Fri, 17 Jun 2011 16:25:51 -0400 Subject: pnfs-obj: No longer needed to take an extra ref at add_device Andy's last device_cache patches, already take an extra reference on the newly inserted device_id. So we can remove it from obj-io. Without this patch the device_ids are leaked. Andy's patches are not in Linus tree yet. So I'm not sure if they are scheduled for this Kernel or the next. This patch should be added as part of these. CC: Andy Adamson Signed-off-by: Boaz Harrosh Signed-off-by: Trond Myklebust diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 9cf208d..eb4aafa 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -108,7 +108,6 @@ _dev_list_add(const struct nfs_server *nfss, de = n; } - atomic_inc(&de->id_node.ref); return de; } -- cgit v0.10.2 From cefa9993f161c1c2b6b91b7ea2e84a9bfbd43d2e Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Sun, 19 Jun 2011 16:13:01 -0700 Subject: netpoll: copy dev name of slaves to struct netpoll Otherwise we will not see the name of the slave dev in error message: [ 388.469446] (null): doesn't support polling, aborting. Signed-off-by: WANG Cong Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 652b30e..eafe44a 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1297,6 +1297,7 @@ static inline int slave_enable_netpoll(struct slave *slave) goto out; np->dev = slave->dev; + strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ); err = __netpoll_setup(np); if (err) { kfree(np); diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index a6b2f86..c188c80 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -243,6 +243,7 @@ int br_netpoll_enable(struct net_bridge_port *p) goto out; np->dev = p->dev; + strlcpy(np->dev_name, p->dev->name, IFNAMSIZ); err = __netpoll_setup(np); if (err) { -- cgit v0.10.2 From 658924dc9ae2ca8e3c46f36306f5dbd501cf4688 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 19 Jun 2011 12:43:33 +0000 Subject: hp100: fix an skb->len race As soon as skb is given to hardware and spinlock released, TX completion can free skb under us. Therefore, we should update netdev stats before spinlock release. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 8e10d2f..c3ecb11 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -1580,12 +1580,12 @@ static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb, hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */ lp->txrcommit++; - spin_unlock_irqrestore(&lp->lock, flags); - /* Update statistics */ dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; + spin_unlock_irqrestore(&lp->lock, flags); + return NETDEV_TX_OK; drop: -- cgit v0.10.2 From 44da29d26bb8df3b0411ba902f2bc9b973ea38e4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 19 Jun 2011 12:52:36 +0000 Subject: sgi-xp: fix a use after free Its illegal to dereference skb after dev_kfree_skb(skb) Signed-off-by: Eric Dumazet CC: Robin Holt Signed-off-by: David S. Miller diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index ee5109a..42f0673 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -495,14 +495,14 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } } + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + if (atomic_dec_return(&queued_msg->use_count) == 0) { dev_kfree_skb(skb); kfree(queued_msg); } - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - return NETDEV_TX_OK; } -- cgit v0.10.2 From 8323fa6ba313ae2664420ec34d56a7fb0bbbe525 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 17 Jun 2011 13:13:52 -0400 Subject: drm/radeon/kms/atom: fix duallink on some early DCE3.2 cards Certain revisions of the vbios on DCE3.2 cards have a bug in the transmitter control table which prevents duallink from being enabled properly on some cards. The action switch statement jumps to the wrong offset for the OUTPUT_ENABLE action. The fix is to use the ENABLE action rather than the OUTPUT_ENABLE action on the affected cards. In fixed version of the vbios, both actions jump to the same offset, so the change should be safe. Reported-and-tested-by: Dave Airlie Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index f55b64c..012f802 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1431,7 +1431,11 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) if (is_dig) { switch (mode) { case DRM_MODE_DPMS_ON: - atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); + /* some early dce3.2 boards have a bug in their transmitter control table */ + if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730)) + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0); + else + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0); if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) { struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); -- cgit v0.10.2 From 74d074eecbb4778e5f5ee7d59399da971682c532 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 17 Jun 2011 06:11:30 +0000 Subject: drm/radeon/kms: add missing param for dce3.2 DP transmitter setup This is used during phy init to set up the phy for DP. This may fix DP problems on DCE3.2 cards. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 012f802..b293487 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1090,9 +1090,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t break; } - if (is_dp) + if (is_dp) { args.v2.acConfig.fCoherentMode = 1; - else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) { + args.v2.acConfig.fDPConnector = 1; + } else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) { if (dig->coherent_mode) args.v2.acConfig.fCoherentMode = 1; if (radeon_encoder->pixel_clock > 165000) -- cgit v0.10.2 From 682f1a54a03513fd6bcede56845f1ba21f48c182 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 18 Jun 2011 03:59:51 +0000 Subject: drm/radeon: avoid warnings from r600/eg irq handlers on powered off card. Since we were calling the wptr function before checking if the IH was even enabled, or the GPU wasn't shutdown, we'd get spam in the logs when the GPU readback 0xffffffff. This reorders things so we return early in the no IH and GPU shutdown cases. Reported-and-tested-by: ManDay on #radeon Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 7e3d96e..7162b7b 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2695,28 +2695,25 @@ static inline u32 evergreen_get_ih_wptr(struct radeon_device *rdev) int evergreen_irq_process(struct radeon_device *rdev) { - u32 wptr = evergreen_get_ih_wptr(rdev); - u32 rptr = rdev->ih.rptr; + u32 wptr; + u32 rptr; u32 src_id, src_data; u32 ring_index; unsigned long flags; bool queue_hotplug = false; - DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); - if (!rdev->ih.enabled) + if (!rdev->ih.enabled || rdev->shutdown) return IRQ_NONE; - spin_lock_irqsave(&rdev->ih.lock, flags); + wptr = evergreen_get_ih_wptr(rdev); + rptr = rdev->ih.rptr; + DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); + spin_lock_irqsave(&rdev->ih.lock, flags); if (rptr == wptr) { spin_unlock_irqrestore(&rdev->ih.lock, flags); return IRQ_NONE; } - if (rdev->shutdown) { - spin_unlock_irqrestore(&rdev->ih.lock, flags); - return IRQ_NONE; - } - restart_ih: /* display interrupts */ evergreen_irq_ack(rdev); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 7dd45ca..dc9fde3 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3294,27 +3294,26 @@ static inline u32 r600_get_ih_wptr(struct radeon_device *rdev) int r600_irq_process(struct radeon_device *rdev) { - u32 wptr = r600_get_ih_wptr(rdev); - u32 rptr = rdev->ih.rptr; + u32 wptr; + u32 rptr; u32 src_id, src_data; u32 ring_index; unsigned long flags; bool queue_hotplug = false; - DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); - if (!rdev->ih.enabled) + if (!rdev->ih.enabled || rdev->shutdown) return IRQ_NONE; + wptr = r600_get_ih_wptr(rdev); + rptr = rdev->ih.rptr; + DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr); + spin_lock_irqsave(&rdev->ih.lock, flags); if (rptr == wptr) { spin_unlock_irqrestore(&rdev->ih.lock, flags); return IRQ_NONE; } - if (rdev->shutdown) { - spin_unlock_irqrestore(&rdev->ih.lock, flags); - return IRQ_NONE; - } restart_ih: /* display interrupts */ -- cgit v0.10.2 From 4ee1c57fcadfb79a6515698d8001081b5b980e32 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 20 Jun 2011 15:25:35 +1000 Subject: drm/nouveau: drop leftover debugging this printk isn't really useful, just drop it for now. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index f0d459b..525744d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -262,7 +262,6 @@ static bool nouveau_dsm_detect(void) vga_count++; retval = nouveau_dsm_pci_probe(pdev); - printk("ret val is %d\n", retval); if (retval & NOUVEAU_DSM_HAS_MUX) has_dsm |= 1; if (retval & NOUVEAU_DSM_HAS_OPT) -- cgit v0.10.2 From 155d109b5f52ffd749219b27702462dcd9cf4f8d Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 20 Jun 2011 13:23:14 +0200 Subject: block: add REQ_SECURE to REQ_COMMON_MASK Add REQ_SECURE flag to REQ_COMMON_MASK so that init_request_from_bio() can pass it to @req->cmd_flags. Signed-off-by: Namhyung Kim Acked-by: Adrian Hunter Cc: stable@kernel.org # 2.6.36 and newer Signed-off-by: Jens Axboe diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 2a7cea5..6395692 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -167,7 +167,7 @@ enum rq_flag_bits { (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \ - REQ_NOIDLE | REQ_FLUSH | REQ_FUA) + REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE) #define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_RAHEAD (1 << __REQ_RAHEAD) -- cgit v0.10.2 From 161b6ae0e067e421b20bb35caf66bdb405c929ac Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sat, 28 May 2011 13:23:42 +0200 Subject: debugobjects: Fix boot crash when kmemleak and debugobjects enabled Order of initialization look like this: ... debugobjects kmemleak ...(lots of other subsystems)... workqueues (through early initcall) ... debugobjects use schedule_work for batch freeing of its data and kmemleak heavily use debugobjects, so when it comes to freeing and workqueues were not initialized yet, kernel crashes: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __queue_work+0x29/0x41a [] queue_work_on+0x16/0x1d [] queue_work+0x29/0x55 [] schedule_work+0x13/0x15 [] free_object+0x90/0x95 [] debug_check_no_obj_freed+0x187/0x1d3 [] ? _raw_spin_unlock_irqrestore+0x30/0x4d [] ? free_object_rcu+0x68/0x6d [] kmem_cache_free+0x64/0x12c [] free_object_rcu+0x68/0x6d [] __rcu_process_callbacks+0x1b6/0x2d9 ... because system_wq is NULL. Fix it by checking if workqueues susbystem was initialized before using. Signed-off-by: Marcin Slusarz Cc: Catalin Marinas Cc: Tejun Heo Cc: Dipankar Sarma Cc: Paul E. McKenney Cc: stable@kernel.org Link: http://lkml.kernel.org/r/20110528112342.GA3068@joi.lan Signed-off-by: Thomas Gleixner diff --git a/lib/debugobjects.c b/lib/debugobjects.c index 9d86e45..a78b7c6 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -198,7 +198,7 @@ static void free_object(struct debug_obj *obj) * initialized: */ if (obj_pool_free > ODEBUG_POOL_SIZE && obj_cache) - sched = !work_pending(&debug_obj_work); + sched = keventd_up() && !work_pending(&debug_obj_work); hlist_add_head(&obj->node, &obj_pool); obj_pool_free++; obj_pool_used--; -- cgit v0.10.2 From 6f2e810ad5d162c2bfa063c1811087277b299e4e Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 20 Jun 2011 10:27:07 +0200 Subject: ALSA: HDA: Remove quirk for an HP device The reporter, who is running kernel 2.6.38, reports that he needs to set model=auto for the headphone output to work correctly. BugLink: http://bugs.launchpad.net/bugs/761022 Cc: stable@kernel.org (v2.6.38+) Reported-by: Jo Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 61a774b..c923b2c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4883,7 +4883,6 @@ static const struct snd_pci_quirk alc880_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0xe309, "ULI", ALC880_3ST_DIG), SND_PCI_QUIRK(0x1025, 0xe310, "ULI", ALC880_3ST), SND_PCI_QUIRK(0x1039, 0x1234, NULL, ALC880_6ST_DIG), - SND_PCI_QUIRK(0x103c, 0x2a09, "HP", ALC880_5ST), SND_PCI_QUIRK(0x1043, 0x10b3, "ASUS W1V", ALC880_ASUS_W1V), SND_PCI_QUIRK(0x1043, 0x10c2, "ASUS W6A", ALC880_ASUS_DIG), SND_PCI_QUIRK(0x1043, 0x10c3, "ASUS Wxx", ALC880_ASUS_DIG), -- cgit v0.10.2 From 105f4622104848ff1ee1f644d661bef9dec3eb27 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 7 Jun 2011 11:50:23 -0400 Subject: nfsd4: fix break_lease flags on nfsd open Thanks to Casey Bodley for pointing out that on a read open we pass 0, instead of O_RDONLY, to break_lease, with the result that a read open is treated like a write open for the purposes of lease breaking! Reported-by: Casey Bodley Cc: stable@kernel.org Signed-off-by: J. Bruce Fields diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index f3fb61b..fd0acca 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -696,7 +696,15 @@ nfsd_access(struct svc_rqst *rqstp, struct svc_fh *fhp, u32 *access, u32 *suppor } #endif /* CONFIG_NFSD_V3 */ +static int nfsd_open_break_lease(struct inode *inode, int access) +{ + unsigned int mode; + if (access & NFSD_MAY_NOT_BREAK_LEASE) + return 0; + mode = (access & NFSD_MAY_WRITE) ? O_WRONLY : O_RDONLY; + return break_lease(inode, mode | O_NONBLOCK); +} /* * Open an existing file or directory. @@ -744,12 +752,7 @@ nfsd_open(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, if (!inode->i_fop) goto out; - /* - * Check to see if there are any leases on this file. - * This may block while leases are broken. - */ - if (!(access & NFSD_MAY_NOT_BREAK_LEASE)) - host_err = break_lease(inode, O_NONBLOCK | ((access & NFSD_MAY_WRITE) ? O_WRONLY : 0)); + host_err = nfsd_open_break_lease(inode, access); if (host_err) /* NOMEM or WOULDBLOCK */ goto out_nfserr; -- cgit v0.10.2 From 185bf87393afe6b966881e36c459949d90930a7a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 20 Jun 2011 10:10:24 +0300 Subject: ubifs: dereferencing an ERR_PTR in ubifs_mount() d251ed271d5 "ubifs: fix sget races" left out the goto from this error path so the static checkers complain that we're dereferencing "sb" when it's an ERR_PTR. Signed-off-by: Dan Carpenter Signed-off-by: Al Viro diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 8c892c2..529be05 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -2146,6 +2146,7 @@ static struct dentry *ubifs_mount(struct file_system_type *fs_type, int flags, if (IS_ERR(sb)) { err = PTR_ERR(sb); kfree(c); + goto out_close; } if (sb->s_root) { -- cgit v0.10.2 From 1712c20dae7b770b62b2e3272100b3b40af0157c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Jun 2011 19:59:04 -0400 Subject: bad_inode_permission() is safe from RCU mode return -EIO; is *not* a blocking operation, thank you very much. Nick, what the hell have you been smoking? Signed-off-by: Al Viro diff --git a/fs/bad_inode.c b/fs/bad_inode.c index 9ad2369..bfcb18f 100644 --- a/fs/bad_inode.c +++ b/fs/bad_inode.c @@ -231,9 +231,6 @@ static int bad_inode_readlink(struct dentry *dentry, char __user *buffer, static int bad_inode_permission(struct inode *inode, int mask, unsigned int flags) { - if (flags & IPERM_FLAG_RCU) - return -ECHILD; - return -EIO; } -- cgit v0.10.2 From ec12781f192568f7ea860f440f890389ba393df7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Jun 2011 20:03:36 -0400 Subject: cifs_permission() doesn't need to bail out in RCU mode nothing potentially blocking except generic_permission(), which will DTRT Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index e9def99..2f0c586 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -257,9 +257,6 @@ static int cifs_permission(struct inode *inode, int mask, unsigned int flags) { struct cifs_sb_info *cifs_sb; - if (flags & IPERM_FLAG_RCU) - return -ECHILD; - cifs_sb = CIFS_SB(inode->i_sb); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) { -- cgit v0.10.2 From 6b419951f1e44c8a46fccfc6551eca9a9980acd6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Jun 2011 20:11:43 -0400 Subject: coda_ioctl_permission() is safe in RCU mode return (mask & MAY_EXEC) ? -EACCES : 0; is non-blocking... Signed-off-by: Al Viro diff --git a/fs/coda/pioctl.c b/fs/coda/pioctl.c index 6cbb3af..cb140ef 100644 --- a/fs/coda/pioctl.c +++ b/fs/coda/pioctl.c @@ -43,8 +43,6 @@ const struct file_operations coda_ioctl_operations = { /* the coda pioctl inode ops */ static int coda_ioctl_permission(struct inode *inode, int mask, unsigned int flags) { - if (flags & IPERM_FLAG_RCU) - return -ECHILD; return (mask & MAY_EXEC) ? -EACCES : 0; } -- cgit v0.10.2 From a63ab94d67879bc0630ea9821c582ddf58ba5527 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Jun 2011 20:17:22 -0400 Subject: logfs doesn't need ->permission() at all ... and never did, what with its ->permission() being what we do by default when ->permission is NULL... Signed-off-by: Al Viro diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c index 9ed89d1..1afae26 100644 --- a/fs/logfs/dir.c +++ b/fs/logfs/dir.c @@ -555,13 +555,6 @@ static int logfs_symlink(struct inode *dir, struct dentry *dentry, return __logfs_create(dir, dentry, inode, target, destlen); } -static int logfs_permission(struct inode *inode, int mask, unsigned int flags) -{ - if (flags & IPERM_FLAG_RCU) - return -ECHILD; - return generic_permission(inode, mask, flags, NULL); -} - static int logfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry) { @@ -820,7 +813,6 @@ const struct inode_operations logfs_dir_iops = { .mknod = logfs_mknod, .rename = logfs_rename, .rmdir = logfs_rmdir, - .permission = logfs_permission, .symlink = logfs_symlink, .unlink = logfs_unlink, }; -- cgit v0.10.2 From 730e908f3539066d4aa01f4720ebfc750ce4d045 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Jun 2011 20:21:44 -0400 Subject: nilfs2_permission() doesn't need to bail out in RCU mode Nothing blocking except for generic_permission(). Which will DTRT. Signed-off-by: Al Viro diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index b954878..b9b45fc 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -801,12 +801,7 @@ out_err: int nilfs_permission(struct inode *inode, int mask, unsigned int flags) { - struct nilfs_root *root; - - if (flags & IPERM_FLAG_RCU) - return -ECHILD; - - root = NILFS_I(inode)->i_root; + struct nilfs_root *root = NILFS_I(inode)->i_root; if ((mask & MAY_WRITE) && root && root->cno != NILFS_CPTREE_CURRENT_CNO) return -EROFS; /* snapshot is not writable */ -- cgit v0.10.2 From cf1279111686d9742cbc4145bc9d526c83f59fea Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Jun 2011 20:35:23 -0400 Subject: proc_fd_permission() is doesn't need to bail out in RCU mode nothing blocking except generic_permission() Signed-off-by: Al Viro diff --git a/fs/proc/base.c b/fs/proc/base.c index 14def99..8a84210 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2169,11 +2169,7 @@ static const struct file_operations proc_fd_operations = { */ static int proc_fd_permission(struct inode *inode, int mask, unsigned int flags) { - int rv; - - if (flags & IPERM_FLAG_RCU) - return -ECHILD; - rv = generic_permission(inode, mask, flags, NULL); + int rv = generic_permission(inode, mask, flags, NULL); if (rv == 0) return 0; if (task_pid(current) == proc_pid(inode)) -- cgit v0.10.2 From 1d29b5a2ed7eb8862c9b66daf475f3e4c1a40299 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Jun 2011 20:37:33 -0400 Subject: reiserfs_permission() doesn't need to bail out in RCU mode nothing blocking other than generic_permission() (and check_acl callback does bail out in RCU mode). Signed-off-by: Al Viro diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index e8a62f4..d780896 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -954,8 +954,6 @@ static int xattr_mount_check(struct super_block *s) int reiserfs_permission(struct inode *inode, int mask, unsigned int flags) { - if (flags & IPERM_FLAG_RCU) - return -ECHILD; /* * We don't do permission checks on the internal objects. * Permissions are determined by the "owning" object. -- cgit v0.10.2 From 1aec7036d0c2996c86ce483ca0a28f3b20807b43 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Jun 2011 20:42:00 -0400 Subject: proc_sys_permission() is OK in RCU mode nothing blocking there, since all instances of sysctl ->permissions() method are non-blocking - both of them, that is. Signed-off-by: Al Viro diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c index f50133c..d167de3 100644 --- a/fs/proc/proc_sysctl.c +++ b/fs/proc/proc_sysctl.c @@ -304,9 +304,6 @@ static int proc_sys_permission(struct inode *inode, int mask,unsigned int flags) struct ctl_table *table; int error; - if (flags & IPERM_FLAG_RCU) - return -ECHILD; - /* Executable files are not allowed under /proc/sys/ */ if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode)) return -EACCES; -- cgit v0.10.2 From 6291176bcd71a2766a19a10cbd9bab07d289e1d7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 19:20:48 -0400 Subject: kill obsolete comment for follow_down() Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index 9e425e7..975c406 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1011,9 +1011,6 @@ failed: * Follow down to the covering mount currently visible to userspace. At each * point, the filesystem owning that dentry may be queried as to whether the * caller is permitted to proceed or not. - * - * Care must be taken as namespace_sem may be held (indicated by mounting_here - * being true). */ int follow_down(struct path *path) { -- cgit v0.10.2 From 8e833fd2e1f0107ee7a4b6bc4de3c9f0e9b0ed41 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 19 Jun 2011 01:56:53 -0400 Subject: fix comment in generic_permission() CAP_DAC_OVERRIDE is enough for MAY_EXEC on directory, even if no exec bits are set. Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index 975c406..0223c41 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -238,7 +238,8 @@ int generic_permission(struct inode *inode, int mask, unsigned int flags, /* * Read/write DACs are always overridable. - * Executable DACs are overridable if at least one exec bit is set. + * Executable DACs are overridable for all directories and + * for non-directories that have least one exec bit set. */ if (!(mask & MAY_EXEC) || execute_ok(inode)) if (ns_capable(inode_userns(inode), CAP_DAC_OVERRIDE)) -- cgit v0.10.2 From 482e0cd3dbaa70f2a2bead4b5f2c0d203ef654ba Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 19 Jun 2011 13:01:04 -0400 Subject: devcgroup_inode_permission: take "is it a device node" checks to inlined wrapper inode_permission() calls devcgroup_inode_permission() and almost all such calls are _not_ for device nodes; let's at least keep the common path straight... Signed-off-by: Al Viro diff --git a/include/linux/device_cgroup.h b/include/linux/device_cgroup.h index 0b0d9c3..7aad1f4 100644 --- a/include/linux/device_cgroup.h +++ b/include/linux/device_cgroup.h @@ -2,8 +2,16 @@ #include #ifdef CONFIG_CGROUP_DEVICE -extern int devcgroup_inode_permission(struct inode *inode, int mask); +extern int __devcgroup_inode_permission(struct inode *inode, int mask); extern int devcgroup_inode_mknod(int mode, dev_t dev); +static inline int devcgroup_inode_permission(struct inode *inode, int mask) +{ + if (likely(!inode->i_rdev)) + return 0; + if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode)) + return 0; + return __devcgroup_inode_permission(inode, mask); +} #else static inline int devcgroup_inode_permission(struct inode *inode, int mask) { return 0; } diff --git a/security/device_cgroup.c b/security/device_cgroup.c index cd1f779..1be6826 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -474,17 +474,11 @@ struct cgroup_subsys devices_subsys = { .subsys_id = devices_subsys_id, }; -int devcgroup_inode_permission(struct inode *inode, int mask) +int __devcgroup_inode_permission(struct inode *inode, int mask) { struct dev_cgroup *dev_cgroup; struct dev_whitelist_item *wh; - dev_t device = inode->i_rdev; - if (!device) - return 0; - if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode)) - return 0; - rcu_read_lock(); dev_cgroup = task_devcgroup(current); -- cgit v0.10.2 From 206b6310fd0268a6ca50cf36f03b0f4eee5602ec Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 20 Jun 2011 10:30:04 -0500 Subject: jfs: old_agsize should be 64 bits in jfs_extendfs Signed-off-by: Dave Kleikamp diff --git a/fs/jfs/resize.c b/fs/jfs/resize.c index 8ea5efb..8d0c1c7 100644 --- a/fs/jfs/resize.c +++ b/fs/jfs/resize.c @@ -80,7 +80,7 @@ int jfs_extendfs(struct super_block *sb, s64 newLVSize, int newLogSize) int log_formatted = 0; struct inode *iplist[1]; struct jfs_superblock *j_sb, *j_sb2; - uint old_agsize; + s64 old_agsize; int agsizechanged = 0; struct buffer_head *bh, *bh2; -- cgit v0.10.2 From 28e0fa894cd5996d3007ce82f07226f79beb7286 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 20 Jun 2011 10:32:46 -0500 Subject: jfs: Update agstart when resizing volume A comment indicates that the IAG's agstart does not need to be updated since it will always point to a block in the same aggregate group, but jfs_fsck isn't so forgiving and reports it as an error. I'm fixing this in jfsutils as well, so either a new kernel or new utilities will be sufficient to fix the problem. Signed-off-by: Dave Kleikamp diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c index ed53a47..0533e8f 100644 --- a/fs/jfs/jfs_imap.c +++ b/fs/jfs/jfs_imap.c @@ -2921,10 +2921,9 @@ int diExtendFS(struct inode *ipimap, struct inode *ipbmap) continue; } - /* agstart that computes to the same ag is treated as same; */ agstart = le64_to_cpu(iagp->agstart); - /* iagp->agstart = agstart & ~(mp->db_agsize - 1); */ n = agstart >> mp->db_agl2size; + iagp->agstart = cpu_to_le64((s64)n << mp->db_agl2size); /* compute backed inodes */ numinos = (EXTSPERIAG - le32_to_cpu(iagp->nfreeexts)) -- cgit v0.10.2 From d31b53e3cd069e02290ed8a648aa8c7618d6fe77 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 20 Jun 2011 10:53:46 -0500 Subject: JFS: Don't save agno in the inode Resizing the file system can result in an in-memory inode being remapped to a different aggregate group (AG). A cached AG number can cause problems when trying to free or allocate inodes. Instead, save the IAG's agstart address and calculate the agno when we need it. Signed-off-by: Dave Kleikamp diff --git a/fs/jfs/file.c b/fs/jfs/file.c index c5ce6c1..2f3f531 100644 --- a/fs/jfs/file.c +++ b/fs/jfs/file.c @@ -66,9 +66,9 @@ static int jfs_open(struct inode *inode, struct file *file) struct jfs_inode_info *ji = JFS_IP(inode); spin_lock_irq(&ji->ag_lock); if (ji->active_ag == -1) { - ji->active_ag = ji->agno; - atomic_inc( - &JFS_SBI(inode->i_sb)->bmap->db_active[ji->agno]); + struct jfs_sb_info *jfs_sb = JFS_SBI(inode->i_sb); + ji->active_ag = BLKTOAG(addressPXD(&ji->ixpxd), jfs_sb); + atomic_inc( &jfs_sb->bmap->db_active[ji->active_ag]); } spin_unlock_irq(&ji->ag_lock); } diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c index 0533e8f..b78b2f9 100644 --- a/fs/jfs/jfs_imap.c +++ b/fs/jfs/jfs_imap.c @@ -397,7 +397,7 @@ int diRead(struct inode *ip) release_metapage(mp); /* set the ag for the inode */ - JFS_IP(ip)->agno = BLKTOAG(agstart, sbi); + JFS_IP(ip)->agstart = agstart; JFS_IP(ip)->active_ag = -1; return (rc); @@ -901,7 +901,7 @@ int diFree(struct inode *ip) /* get the allocation group for this ino. */ - agno = JFS_IP(ip)->agno; + agno = BLKTOAG(JFS_IP(ip)->agstart, JFS_SBI(ip->i_sb)); /* Lock the AG specific inode map information */ @@ -1315,12 +1315,11 @@ int diFree(struct inode *ip) static inline void diInitInode(struct inode *ip, int iagno, int ino, int extno, struct iag * iagp) { - struct jfs_sb_info *sbi = JFS_SBI(ip->i_sb); struct jfs_inode_info *jfs_ip = JFS_IP(ip); ip->i_ino = (iagno << L2INOSPERIAG) + ino; jfs_ip->ixpxd = iagp->inoext[extno]; - jfs_ip->agno = BLKTOAG(le64_to_cpu(iagp->agstart), sbi); + jfs_ip->agstart = le64_to_cpu(iagp->agstart); jfs_ip->active_ag = -1; } @@ -1379,7 +1378,7 @@ int diAlloc(struct inode *pip, bool dir, struct inode *ip) */ /* get the ag number of this iag */ - agno = JFS_IP(pip)->agno; + agno = BLKTOAG(JFS_IP(pip)->agstart, JFS_SBI(pip->i_sb)); if (atomic_read(&JFS_SBI(pip->i_sb)->bmap->db_active[agno])) { /* diff --git a/fs/jfs/jfs_incore.h b/fs/jfs/jfs_incore.h index 1439f11..5097839 100644 --- a/fs/jfs/jfs_incore.h +++ b/fs/jfs/jfs_incore.h @@ -50,8 +50,9 @@ struct jfs_inode_info { short btindex; /* btpage entry index*/ struct inode *ipimap; /* inode map */ unsigned long cflag; /* commit flags */ + long agstart; /* agstart of the containing IAG */ u16 bxflag; /* xflag of pseudo buffer? */ - unchar agno; /* ag number */ + unchar pad; signed char active_ag; /* ag currently allocating from */ lid_t blid; /* lid of pseudo buffer? */ lid_t atlhead; /* anonymous tlock list head */ -- cgit v0.10.2 From fa7ccfb17033bfb5bca86f6b909cab0b807efbc0 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 18 Jun 2011 22:49:53 -0500 Subject: rtlwifi: rtl8192se: Handle duplicate PCI ID 0x10ec:0x8192 conflict with r8192e_pci There are two devices with PCI ID 0x10ec:0x8192, namely RTL8192E and RTL8192SE. The method of distinguishing them is by the revision ID at offset 0x8 of the PCI configuration space. If the value is 0x10, then the device uses rtl8192se for a driver. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 9f8ccae..254b64b 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1624,6 +1624,16 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, pci_read_config_byte(pdev, 0x8, &revisionid); pci_read_config_word(pdev, 0x3C, &irqline); + /* PCI ID 0x10ec:0x8192 occurs for both RTL8192E, which uses + * r8192e_pci, and RTL8192SE, which uses this driver. If the + * revision ID is RTL_PCI_REVISION_ID_8192PCIE (0x01), then + * the correct driver is r8192e_pci, thus this routine should + * return false. + */ + if (deviceid == RTL_PCI_8192SE_DID && + revisionid == RTL_PCI_REVISION_ID_8192PCIE) + return false; + if (deviceid == RTL_PCI_8192_DID || deviceid == RTL_PCI_0044_DID || deviceid == RTL_PCI_0047_DID || @@ -1856,7 +1866,8 @@ int __devinit rtl_pci_probe(struct pci_dev *pdev, pci_write_config_byte(pdev, 0x04, 0x07); /* find adapter */ - _rtl_pci_find_adapter(pdev, hw); + if (!_rtl_pci_find_adapter(pdev, hw)) + goto fail3; /* Init IO handler */ _rtl_pci_io_handler_init(&pdev->dev, hw); -- cgit v0.10.2 From c82b9d7fe7464aec78210544948564ffe3bb2d2b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 19 Jun 2011 20:26:15 +0000 Subject: netxen: fix race in skb->len access As soon as skb is given to hardware, TX completion can free skb under us. Therefore, we should update dev stats before kicking the device. Signed-off-by: Eric Dumazet CC: Amit Kumar Salecha Signed-off-by: David S. Miller diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index b644383..c0788a3 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1965,11 +1965,11 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) netxen_tso_check(netdev, tx_ring, first_desc, skb); - netxen_nic_update_cmd_producer(adapter, tx_ring); - adapter->stats.txbytes += skb->len; adapter->stats.xmitcalled++; + netxen_nic_update_cmd_producer(adapter, tx_ring); + return NETDEV_TX_OK; drop_packet: -- cgit v0.10.2 From 8ad2475e3555346fbd738e77da12578b97d10505 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 19 Jun 2011 22:31:20 +0000 Subject: ipv4, ping: Remove duplicate icmp.h include Remove the duplicate inclusion of net/icmp.h from net/ipv4/ping.c Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index 9aaa671..39b403f 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 19345cb299e8234006c5125151ab723e851a1d24 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 19 Jun 2011 18:33:46 -0400 Subject: NFSv4.1: file layout must consider pg_bsize for coalescing Otherwise we end up overflowing the rpc buffer size on the receive end. Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 5d6f369..0bafcc9 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -30,6 +30,7 @@ */ #include +#include #include "internal.h" #include "nfs4filelayout.h" @@ -666,8 +667,9 @@ filelayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, u64 p_stripe, r_stripe; u32 stripe_unit; - if (!pnfs_generic_pg_test(pgio, prev, req)) - return 0; + if (!pnfs_generic_pg_test(pgio, prev, req) || + !nfs_generic_pg_test(pgio, prev, req)) + return false; if (!pgio->pg_lseg) return 1; diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index 7913961..0098557 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -204,7 +204,7 @@ nfs_wait_on_request(struct nfs_page *req) TASK_UNINTERRUPTIBLE); } -static bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, struct nfs_page *prev, struct nfs_page *req) +bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, struct nfs_page *prev, struct nfs_page *req) { /* * FIXME: ideally we should be able to coalesce all requests @@ -218,6 +218,7 @@ static bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, struct nfs_p return desc->pg_count + req->wb_bytes <= desc->pg_bsize; } +EXPORT_SYMBOL_GPL(nfs_generic_pg_test); /** * nfs_pageio_init - initialise a page io descriptor diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index 3a34e80..25311b3 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -92,6 +92,9 @@ extern int nfs_pageio_add_request(struct nfs_pageio_descriptor *, struct nfs_page *); extern void nfs_pageio_complete(struct nfs_pageio_descriptor *desc); extern void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *, pgoff_t); +extern bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, + struct nfs_page *prev, + struct nfs_page *req); extern int nfs_wait_on_request(struct nfs_page *); extern void nfs_unlock_request(struct nfs_page *req); extern int nfs_set_page_tag_locked(struct nfs_page *req); -- cgit v0.10.2 From 384420409d9b5d4443940abace49363d26135412 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Sun, 19 Jun 2011 21:48:06 +0000 Subject: pxa168_eth: fix race in transmit path. Because the socket buffer is freed in the completion interrupt, it is not safe to access it after submitting it to the hardware. Cc: stable@kernel.org Cc: Sachin Sanap Cc: Zhangfei Gao Cc: Philip Rakity Signed-off-by: Richard Cochran Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c index 89f7540..5f597ca 100644 --- a/drivers/net/pxa168_eth.c +++ b/drivers/net/pxa168_eth.c @@ -1273,7 +1273,7 @@ static int pxa168_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) wmb(); wrl(pep, SDMA_CMD, SDMA_CMD_TXDH | SDMA_CMD_ERD); - stats->tx_bytes += skb->len; + stats->tx_bytes += length; stats->tx_packets++; dev->trans_start = jiffies; if (pep->tx_ring_size - pep->tx_desc_count <= 1) { -- cgit v0.10.2 From ecc90462b428db2ad2ee5081c45496ed10f3a633 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Mon, 20 Jun 2011 17:53:24 -0500 Subject: jfs: agstart field must be 64 bits The previous patch added the agstart field to jfs_ip, but declared it a long. We need to make sure its 64 bits on every platform. Signed-off-by: Dave Kleikamp diff --git a/fs/jfs/jfs_incore.h b/fs/jfs/jfs_incore.h index 5097839..584a4a1 100644 --- a/fs/jfs/jfs_incore.h +++ b/fs/jfs/jfs_incore.h @@ -50,7 +50,7 @@ struct jfs_inode_info { short btindex; /* btpage entry index*/ struct inode *ipimap; /* inode map */ unsigned long cflag; /* commit flags */ - long agstart; /* agstart of the containing IAG */ + u64 agstart; /* agstart of the containing IAG */ u16 bxflag; /* xflag of pseudo buffer? */ unchar pad; signed char active_ag; /* ag currently allocating from */ -- cgit v0.10.2 From fdb9c3cd5124c9a6e4c824ed2bca5b4602e84a1a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 21 Apr 2011 23:09:11 +0000 Subject: msm: timer: Fix DGT rate on 8960 and 8660 The DGT runs at 27 MHz divided by 4 on 8660 and 8960. Signed-off-by: Stephen Boyd Signed-off-by: David Brown diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 2232032..63621f1 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -57,10 +57,12 @@ enum timer_location { #if defined(CONFIG_ARCH_QSD8X50) #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ #define MSM_DGT_SHIFT (0) -#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \ - defined(CONFIG_ARCH_MSM8960) +#elif defined(CONFIG_ARCH_MSM7X30) #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */ #define MSM_DGT_SHIFT (0) +#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960) +#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */ +#define MSM_DGT_SHIFT (0) #else #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ #define MSM_DGT_SHIFT (5) -- cgit v0.10.2 From a377e187df725fe7e62d2cec59ec290c5a605d93 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 20 Jun 2011 13:00:31 -0400 Subject: drm/radeon/kms/r6xx+: voltage fixes 0xff01 is not an actual voltage value, but a flag for the driver. If the power state as that value, skip setting the voltage. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 7162b7b..445af79 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -140,11 +140,17 @@ void evergreen_pm_misc(struct radeon_device *rdev) struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage; if (voltage->type == VOLTAGE_SW) { + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage->voltage == 0xff01) + return; if (voltage->voltage && (voltage->voltage != rdev->pm.current_vddc)) { radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC); rdev->pm.current_vddc = voltage->voltage; DRM_DEBUG("Setting: vddc: %d\n", voltage->voltage); } + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage->vddci == 0xff01) + return; if (voltage->vddci && (voltage->vddci != rdev->pm.current_vddci)) { radeon_atom_set_voltage(rdev, voltage->vddci, SET_VOLTAGE_TYPE_ASIC_VDDCI); rdev->pm.current_vddci = voltage->vddci; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index dc9fde3..f79d2cc 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -590,6 +590,9 @@ void r600_pm_misc(struct radeon_device *rdev) struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage; if ((voltage->type == VOLTAGE_SW) && voltage->voltage) { + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage->voltage == 0xff01) + return; if (voltage->voltage != rdev->pm.current_vddc) { radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC); rdev->pm.current_vddc = voltage->voltage; diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index fa62a50..1e725d9 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -2607,6 +2607,10 @@ void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 v if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev)) return; + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage_level == 0xff01) + return; + switch (crev) { case 1: args.v1.ucVoltageType = voltage_type; diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index ef8a5bab..6f508ff 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -105,6 +105,9 @@ void rv770_pm_misc(struct radeon_device *rdev) struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage; if ((voltage->type == VOLTAGE_SW) && voltage->voltage) { + /* 0xff01 is a flag rather then an actual voltage */ + if (voltage->voltage == 0xff01) + return; if (voltage->voltage != rdev->pm.current_vddc) { radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC); rdev->pm.current_vddc = voltage->voltage; -- cgit v0.10.2 From 79568f5be06c91071697c065f01f3ebfbeb25a61 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 Jun 2011 20:13:49 -0700 Subject: vfs: i_state needs to be 'unsigned long' for now Commit 13e12d14e2dc ("vfs: reorganize 'struct inode' layout a bit") moved things around a bit changed i_state to be unsigned int instead of unsigned long. That was to help structure layout for the 64-bit case, and shrink 'struct inode' a bit (admittedly that only happened when spinlock debugging was on and i_flags didn't pack with i_lock). However, Meelis Roos reports that this results in unaligned exceptions on sprc, and it turns out that the bit-locking primitives that we use for the I_NEW bit want to use the bitops. Which want 'unsigned long', not 'unsigned int'. We really should fix the bit locking code to not have that kind of requirement, but that's a much bigger change. So for now, revert that field back to 'unsigned long' (but keep the other re-ordering changes from the commit that caused this). Andi points out that we have played games with this in 'struct page', so it's solvable with other hacks too, but since right now the struct inode size advantage only happens with some rare config options, it's not worth fighting. It _would_ be worth fixing the bitlocking code, though. Especially since there is no type safety in the bitlocking code (this never caused any warnings, and worked fine on x86-64, because the bitlocks take a 'void *' and x86-64 doesn't care that deeply about alignment). So it's currently a very easy problem to trigger by mistake and never notice. Reported-by: Meelis Roos Cc: Andi Kleen Cc: David Miller Signed-off-by: Linus Torvalds diff --git a/include/linux/fs.h b/include/linux/fs.h index 1c77787..6e73e2e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -744,7 +744,7 @@ struct inode { spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ unsigned int i_flags; - unsigned int i_state; + unsigned long i_state; #ifdef CONFIG_SECURITY void *i_security; #endif -- cgit v0.10.2 From 56299378726d5f2ba8d3c8cbbd13cb280ba45e4f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 20 Jun 2011 20:25:46 -0700 Subject: Linux 3.0-rc4 diff --git a/Makefile b/Makefile index 0499c2e..41330a0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 0 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Sneaky Weasel # *DOCUMENTATION* -- cgit v0.10.2 From c933790614529c06b221f73ff36e2456aecee30d Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Mon, 20 Jun 2011 22:11:11 +0100 Subject: ALSA: hda - Remove ALC268 model override for CPR2000 The "diverse" Quanta ID 0x0763 is overridden to ALC268_ACER. This keeps headphone automute and microphone input from operating on at least one laptop from Opti Systems. Without the override, the BIOS parser does a fine job setting the card up and everything works. Tested-By: Peter Schneider Signed-off-by: Tony Vroon Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c923b2c..475ed1e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -13871,7 +13871,6 @@ static const struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST), SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO), SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA), - SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER), SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1), {} }; -- cgit v0.10.2 From 42467b32ce4f1ba933673b396f807110e3618ff5 Mon Sep 17 00:00:00 2001 From: Lydia Wang Date: Mon, 20 Jun 2011 14:14:37 +0800 Subject: ALSA: VIA HDA: Modify initial verbs list for VT1718S. Remove some invalid initial verbs and correct some wrong initial verbs for VT1718S codec. Signed-off-by: Lydia Wang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index c952582..abee9ac 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -4283,9 +4283,6 @@ static const struct hda_verb vt1718S_volume_init_verbs[] = { {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)}, - - /* Setup default input of Front HP to MW9 */ - {0x28, AC_VERB_SET_CONNECT_SEL, 0x1}, /* PW9 PW10 Output enable */ {0x2d, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN}, {0x2e, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN}, @@ -4294,10 +4291,10 @@ static const struct hda_verb vt1718S_volume_init_verbs[] = { /* Enable Boost Volume backdoor */ {0x1, 0xf88, 0x8}, /* MW0/1/2/3/4: un-mute index 0 (AOWx), mute index 1 (MW9) */ - {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, @@ -4307,8 +4304,6 @@ static const struct hda_verb vt1718S_volume_init_verbs[] = { /* set MUX1 = 2 (AOW4), MUX2 = 1 (AOW3) */ {0x34, AC_VERB_SET_CONNECT_SEL, 0x2}, {0x35, AC_VERB_SET_CONNECT_SEL, 0x1}, - /* Unmute MW4's index 0 */ - {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, { } }; -- cgit v0.10.2 From ba31a60d0fd8a3976d44d32f2b82491c62646b2a Mon Sep 17 00:00:00 2001 From: Lydia Wang Date: Mon, 20 Jun 2011 14:16:33 +0800 Subject: ALSA: VIA HDA: Mute/unmute mixer conncted to Headphone for VT1718S. When switch HP independent mode, mute/unmute connctions of mixer which is connected to headphone for VT1718S. Signed-off-by: Lydia Wang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index abee9ac..f1a80cd 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -745,12 +745,23 @@ static int via_independent_hp_put(struct snd_kcontrol *kcontrol, struct via_spec *spec = codec->spec; hda_nid_t nid = kcontrol->private_value; unsigned int pinsel = ucontrol->value.enumerated.item[0]; + unsigned int parm0, parm1; /* Get Independent Mode index of headphone pin widget */ spec->hp_independent_mode = spec->hp_independent_mode_index == pinsel ? 1 : 0; - if (spec->codec_type == VT1718S) + if (spec->codec_type == VT1718S) { snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, pinsel ? 2 : 0); + /* Set correct mute switch for MW3 */ + parm0 = spec->hp_independent_mode ? + AMP_IN_UNMUTE(0) : AMP_IN_MUTE(0); + parm1 = spec->hp_independent_mode ? + AMP_IN_MUTE(1) : AMP_IN_UNMUTE(1); + snd_hda_codec_write(codec, 0x1b, 0, + AC_VERB_SET_AMP_GAIN_MUTE, parm0); + snd_hda_codec_write(codec, 0x1b, 0, + AC_VERB_SET_AMP_GAIN_MUTE, parm1); + } else snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, pinsel); -- cgit v0.10.2 From e905a83acd7bf8989c3d5ba3099b72675f5d7d29 Mon Sep 17 00:00:00 2001 From: Lydia Wang Date: Mon, 20 Jun 2011 14:17:56 +0800 Subject: ALSA: VIA HDA: Create a master amplifier control for VT1718S. Create a master volume and mute control of playback for VT1718S. Signed-off-by: Lydia Wang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index f1a80cd..f43bb0e 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -4462,6 +4462,19 @@ static int vt1718S_auto_create_multi_out_ctls(struct via_spec *spec, if (err < 0) return err; } else if (i == AUTO_SEQ_FRONT) { + /* add control to mixer index 0 */ + err = via_add_control(spec, VIA_CTL_WIDGET_VOL, + "Master Front Playback Volume", + HDA_COMPOSE_AMP_VAL(0x21, 3, 5, + HDA_INPUT)); + if (err < 0) + return err; + err = via_add_control(spec, VIA_CTL_WIDGET_MUTE, + "Master Front Playback Switch", + HDA_COMPOSE_AMP_VAL(0x21, 3, 5, + HDA_INPUT)); + if (err < 0) + return err; /* Front */ sprintf(name, "%s Playback Volume", chname[i]); err = via_add_control( -- cgit v0.10.2 From bf69d8484cbba2a59dd73cdd20b8d5e79cedce1f Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 21 Jun 2011 08:03:25 +0000 Subject: sh: fix compile error using sh7757lcr_defconfig Fix the complie error in ehci-hcd.c because it needs an additional configuration. CC drivers/usb/host/ehci-hcd.o drivers/usb/host/ehci-hcd.c:1288:2: error: #error "missing bus glue for ehci-hcd" make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1 make[2]: *** [drivers/usb/host] Error 2 make[1]: *** [drivers/usb] Error 2 make: *** [drivers] Error 2 Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig index 33ddb13..cfde98d 100644 --- a/arch/sh/configs/sh7757lcr_defconfig +++ b/arch/sh/configs/sh7757lcr_defconfig @@ -9,7 +9,6 @@ CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS_ALL=y CONFIG_SLAB=y @@ -39,8 +38,6 @@ CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y @@ -56,18 +53,19 @@ CONFIG_SH_ETH=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=3 CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y CONFIG_SPI_SH=y # CONFIG_HWMON is not set -CONFIG_MFD_SH_MOBILE_SDHI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SH=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_SH=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHI=y -- cgit v0.10.2 From f2b9726105824fdeea32a339e5072a358f89a25b Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 21 Jun 2011 08:28:27 +0000 Subject: sh: add platform_device of EHCI/OHCI to setup-sh7757 Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index 423dabf..717a76b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -659,6 +659,54 @@ static struct platform_device spi0_device = { .resource = spi0_resources, }; +static struct resource usb_ehci_resources[] = { + [0] = { + .start = 0xfe4f1000, + .end = 0xfe4f10ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .end = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_ehci_device = { + .name = "sh_ehci", + .id = -1, + .dev = { + .dma_mask = &usb_ehci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_ehci_resources), + .resource = usb_ehci_resources, +}; + +static struct resource usb_ohci_resources[] = { + [0] = { + .start = 0xfe4f1800, + .end = 0xfe4f18ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .end = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_ohci_device = { + .name = "sh_ohci", + .id = -1, + .dev = { + .dma_mask = &usb_ohci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_ohci_resources), + .resource = usb_ohci_resources, +}; + static struct platform_device *sh7757_devices[] __initdata = { &scif2_device, &scif3_device, @@ -670,6 +718,8 @@ static struct platform_device *sh7757_devices[] __initdata = { &dma2_device, &dma3_device, &spi0_device, + &usb_ehci_device, + &usb_ohci_device, }; static int __init sh7757_devices_setup(void) -- cgit v0.10.2 From 5a5685525dbadbe31b8efb113c0d41be8cddda09 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 17 Jun 2011 04:33:13 +0000 Subject: ARM: mach-shmobile: mackerel: change usbhs devices order USB1 can use IRQ interrupt and notify function for usbhs driver, but USB0 is using polling for it. The priority of usbhs devices order USB1 > USB0 is good idea Signed-off-by: Kuninori Morimoto Reviewed-by: Simon Horman Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7e1d375..3802f2a 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1287,9 +1287,9 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs0_device, &usb1_host_device, &usbhs1_device, + &usbhs0_device, &leds_device, &fsi_device, &fsi_ak4643_device, -- cgit v0.10.2 From 9e05cdde0c6bb8c3c3ee12e6d6123c6f9f85eea6 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 20 Jun 2011 23:00:11 +0000 Subject: ARM: mach-shmobile: ag5evm: consistently name sdhi info structures Name the SDHI1 instance sh_sdhi1_info to be consistent with sh_sdhi0_info. Signed-off-by: Simon Horman Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 1e2aba2..ce5c251 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -381,7 +381,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) gpio_set_value(GPIO_PORT114, state); } -static struct sh_mobile_sdhi_info sh_sdhi1_platdata = { +static struct sh_mobile_sdhi_info sh_sdhi1_info = { .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, @@ -413,7 +413,7 @@ static struct platform_device sdhi1_device = { .name = "sh_mobile_sdhi", .id = 1, .dev = { - .platform_data = &sh_sdhi1_platdata, + .platform_data = &sh_sdhi1_info, }, .num_resources = ARRAY_SIZE(sdhi1_resources), .resource = sdhi1_resources, -- cgit v0.10.2 From 573619d165b85152eeddd3b3871002c48cd94e42 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 20 Jun 2011 16:46:01 +0100 Subject: ARM: SMP: wait for CPU to be marked active When we bring a CPU online, we should wait for it to become active before entering the idle thread, so we know that the scheduler and thread migration is going to work. Signed-off-by: Russell King diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 344e52b..e7f92a4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -318,9 +318,13 @@ asmlinkage void __cpuinit secondary_start_kernel(void) smp_store_cpu_info(cpu); /* - * OK, now it's safe to let the boot CPU continue + * OK, now it's safe to let the boot CPU continue. Wait for + * the CPU migration code to notice that the CPU is online + * before we continue. */ set_cpu_online(cpu, true); + while (!cpu_active(cpu)) + cpu_relax(); /* * OK, it's off to the idle thread for us -- cgit v0.10.2 From 946a105e16651c35e9cc670bff23812761f1ad35 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Tue, 14 Jun 2011 14:20:44 +0100 Subject: ARM: 6961/1: zImage: Add build-time check for correctly-sized proc_type entries It is easy to mis-maintain the proc_types table such that the entries become wrongly-sized and misaligned when the kernel is built in Thumb-2. This patch adds an assembly-time check which will turn most common size/alignment mistakes in this table into build failures, to avoid having to debug the boot-time kernel hang which would happen if the resulting kernel were actually booted. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 942fad9..940b201 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -597,6 +597,8 @@ __common_mmu_cache_on: sub pc, lr, r0, lsr #32 @ properly flush pipeline #endif +#define PROC_ENTRY_SIZE (4*5) + /* * Here follow the relocatable cache support functions for the * various processors. This is a generic hook for locating an @@ -624,7 +626,7 @@ call_cache_fn: adr r12, proc_types ARM( addeq pc, r12, r3 ) @ call cache function THUMB( addeq r12, r3 ) THUMB( moveq pc, r12 ) @ call cache function - add r12, r12, #4*5 + add r12, r12, #PROC_ENTRY_SIZE b 1b /* @@ -794,6 +796,16 @@ proc_types: .size proc_types, . - proc_types + /* + * If you get a "non-constant expression in ".if" statement" + * error from the assembler on this line, check that you have + * not accidentally written a "b" instruction where you should + * have written W(b). + */ + .if (. - proc_types) % PROC_ENTRY_SIZE != 0 + .error "The size of one or more proc_types entries is wrong." + .endif + /* * Turn off the Cache and MMU. ARMv3 does not support * reading the control register, but ARMv4 does. -- cgit v0.10.2 From 082763a80ad11adbe8418fff1cfe466343035b7a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 20 Jun 2011 08:13:00 +0100 Subject: ARM: 6969/1: plat-iop: fix build error The iop13xx_defconfig didn't build since the platform code uses defines from . Simply add the include so it compiles. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c index 9612a87..bab73e2 100644 --- a/arch/arm/plat-iop/cp6.c +++ b/arch/arm/plat-iop/cp6.c @@ -18,6 +18,7 @@ */ #include #include +#include static int cp6_trap(struct pt_regs *regs, unsigned int instr) { -- cgit v0.10.2 From 8f7d5efbef8718a774ac5e347b4ec069f17fd9b4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 10 Jun 2011 13:30:22 -0400 Subject: NFSv4.1: Fix some issues with pnfs_generic_pg_test 1. If the intention is to coalesce requests 'prev' and 'req' then we have to ensure at least that we have a layout starting at req_offset(prev). 2. If we're only requesting a minimal layout of length desc->pg_count, we need to test the length actually returned by the server before we allow the coalescing to occur. 3. We need to deal correctly with (pgio->lseg == NULL) 4. Fixup the test guarding the pnfs_update_layout. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index eb4aafa..8ff2ea3 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -1000,6 +1000,9 @@ static bool objio_pg_test(struct nfs_pageio_descriptor *pgio, if (!pnfs_generic_pg_test(pgio, prev, req)) return false; + if (pgio->pg_lseg == NULL) + return true; + return pgio->pg_count + req->wb_bytes <= OBJIO_LSEG(pgio->pg_lseg)->max_io_size; } diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 539b94c..0f42e02 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1064,19 +1064,21 @@ pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, gfp_flags = GFP_NOFS; } - if (pgio->pg_count == prev->wb_bytes) { + if (pgio->pg_lseg == NULL) { + if (pgio->pg_count != prev->wb_bytes) + return true; /* This is first coelesce call for a series of nfs_pages */ pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode, prev->wb_context, - req_offset(req), + req_offset(prev), pgio->pg_count, access_type, gfp_flags); - return true; + if (pgio->pg_lseg == NULL) + return true; } - if (pgio->pg_lseg && - req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, + if (req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, pgio->pg_lseg->pls_range.length)) return false; -- cgit v0.10.2 From 19982ba8562e33083cb5bbb59a74855d8a9624ea Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 10 Jun 2011 13:30:23 -0400 Subject: NFSv4.1: Fix an off-by-one error in pnfs_generic_pg_test And document what is going on there... Signed-off-by: Trond Myklebust diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 0f42e02..29c0ca7 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1078,11 +1078,22 @@ pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, return true; } - if (req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, - pgio->pg_lseg->pls_range.length)) - return false; - - return true; + /* + * Test if a nfs_page is fully contained in the pnfs_layout_range. + * Note that this test makes several assumptions: + * - that the previous nfs_page in the struct nfs_pageio_descriptor + * is known to lie within the range. + * - that the nfs_page being tested is known to be contiguous with the + * previous nfs_page. + * - Layout ranges are page aligned, so we only have to test the + * start offset of the request. + * + * Please also note that 'end_offset' is actually the offset of the + * first byte that lies outside the pnfs_layout_range. FIXME? + * + */ + return req_offset(req) < end_offset(pgio->pg_lseg->pls_range.offset, + pgio->pg_lseg->pls_range.length); } EXPORT_SYMBOL_GPL(pnfs_generic_pg_test); -- cgit v0.10.2 From 1650add23578b5ca35c1f1e863987180a8c03779 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Thu, 2 Jun 2011 15:07:35 -0400 Subject: NFS: Fix decode_secinfo_maxsz I initially did the calculation in bytes, and not words Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 5db44a8..6870bc6 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -255,7 +255,7 @@ static int nfs4_stat_to_errno(int); #define decode_fs_locations_maxsz \ (0) #define encode_secinfo_maxsz (op_encode_hdr_maxsz + nfs4_name_maxsz) -#define decode_secinfo_maxsz (op_decode_hdr_maxsz + 4 + (NFS_MAX_SECFLAVORS * (16 + GSS_OID_MAX_LEN))) +#define decode_secinfo_maxsz (op_decode_hdr_maxsz + 1 + ((NFS_MAX_SECFLAVORS * (16 + GSS_OID_MAX_LEN)) / 4)) #if defined(CONFIG_NFS_V4_1) #define NFS4_MAX_MACHINE_NAME_LEN (64) -- cgit v0.10.2 From 9a7b2d1f0eb0a6b674726c9a9d77ce83fd0b27fe Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 6 Jun 2011 14:43:39 -0300 Subject: [media] pwc: better usb disconnect handling Unplugging a pwc cam while an app has the /dev/video# node open leads to an oops in pwc_video_close when the app closes the node, because the disconnect handler has free-ed the pdev struct pwc_video_close tries to use. Instead of adding some sort of bandaid for this. fix it properly using the v4l2 core's new(ish) behavior of keeping the v4l2_dev structure around until both unregister has been called, and all file handles referring to it have been closed: Embed the v4l2_dev structure in the pdev structure and define a v4l2 dev release callback releasing the pdev structure (and thus also the embedded v4l2 dev structure. Signed-off-by: Hans de Goede Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index 1593f8d..760b4de 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -1414,7 +1414,7 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) { ARG_DEF(struct pwc_probe, probe) - strcpy(ARGR(probe).name, pdev->vdev->name); + strcpy(ARGR(probe).name, pdev->vdev.name); ARGR(probe).type = pdev->type; ARG_OUT(probe) break; diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 356cd42..b0bde5a 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -40,7 +40,7 @@ Oh yes, convention: to disctinguish between all the various pointers to device-structures, I use these names for the pointer variables: udev: struct usb_device * - vdev: struct video_device * + vdev: struct video_device (member of pwc_dev) pdev: struct pwc_devive * */ @@ -152,6 +152,7 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf, size_t count, loff_t *ppos); static unsigned int pwc_video_poll(struct file *file, poll_table *wait); static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma); +static void pwc_video_release(struct video_device *vfd); static const struct v4l2_file_operations pwc_fops = { .owner = THIS_MODULE, @@ -164,42 +165,12 @@ static const struct v4l2_file_operations pwc_fops = { }; static struct video_device pwc_template = { .name = "Philips Webcam", /* Filled in later */ - .release = video_device_release, + .release = pwc_video_release, .fops = &pwc_fops, + .ioctl_ops = &pwc_ioctl_ops, }; /***************************************************************************/ - -/* Okay, this is some magic that I worked out and the reasoning behind it... - - The biggest problem with any USB device is of course: "what to do - when the user unplugs the device while it is in use by an application?" - We have several options: - 1) Curse them with the 7 plagues when they do (requires divine intervention) - 2) Tell them not to (won't work: they'll do it anyway) - 3) Oops the kernel (this will have a negative effect on a user's uptime) - 4) Do something sensible. - - Of course, we go for option 4. - - It happens that this device will be linked to two times, once from - usb_device and once from the video_device in their respective 'private' - pointers. This is done when the device is probed() and all initialization - succeeded. The pwc_device struct links back to both structures. - - When a device is unplugged while in use it will be removed from the - list of known USB devices; I also de-register it as a V4L device, but - unfortunately I can't free the memory since the struct is still in use - by the file descriptor. This free-ing is then deferend until the first - opportunity. Crude, but it works. - - A small 'advantage' is that if a user unplugs the cam and plugs it back - in, it should get assigned the same video device minor, but unfortunately - it's non-trivial to re-link the cam back to the video device... (that - would surely be magic! :)) -*/ - -/***************************************************************************/ /* Private functions */ /* Here we want the physical address of the memory. @@ -1016,16 +987,15 @@ static ssize_t show_snapshot_button_status(struct device *class_dev, static DEVICE_ATTR(button, S_IRUGO | S_IWUSR, show_snapshot_button_status, NULL); -static int pwc_create_sysfs_files(struct video_device *vdev) +static int pwc_create_sysfs_files(struct pwc_device *pdev) { - struct pwc_device *pdev = video_get_drvdata(vdev); int rc; - rc = device_create_file(&vdev->dev, &dev_attr_button); + rc = device_create_file(&pdev->vdev.dev, &dev_attr_button); if (rc) goto err; if (pdev->features & FEATURE_MOTOR_PANTILT) { - rc = device_create_file(&vdev->dev, &dev_attr_pan_tilt); + rc = device_create_file(&pdev->vdev.dev, &dev_attr_pan_tilt); if (rc) goto err_button; } @@ -1033,19 +1003,17 @@ static int pwc_create_sysfs_files(struct video_device *vdev) return 0; err_button: - device_remove_file(&vdev->dev, &dev_attr_button); + device_remove_file(&pdev->vdev.dev, &dev_attr_button); err: PWC_ERROR("Could not create sysfs files.\n"); return rc; } -static void pwc_remove_sysfs_files(struct video_device *vdev) +static void pwc_remove_sysfs_files(struct pwc_device *pdev) { - struct pwc_device *pdev = video_get_drvdata(vdev); - if (pdev->features & FEATURE_MOTOR_PANTILT) - device_remove_file(&vdev->dev, &dev_attr_pan_tilt); - device_remove_file(&vdev->dev, &dev_attr_button); + device_remove_file(&pdev->vdev.dev, &dev_attr_pan_tilt); + device_remove_file(&pdev->vdev.dev, &dev_attr_button); } #ifdef CONFIG_USB_PWC_DEBUG @@ -1106,7 +1074,7 @@ static int pwc_video_open(struct file *file) if (ret >= 0) { PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n", - pdev->vdev->name, + pdev->vdev.name, pwc_sensor_type_to_string(i), i); } } @@ -1180,16 +1148,15 @@ static int pwc_video_open(struct file *file) return 0; } - -static void pwc_cleanup(struct pwc_device *pdev) +static void pwc_video_release(struct video_device *vfd) { - pwc_remove_sysfs_files(pdev->vdev); - video_unregister_device(pdev->vdev); + struct pwc_device *pdev = container_of(vfd, struct pwc_device, vdev); + int hint; -#ifdef CONFIG_USB_PWC_INPUT_EVDEV - if (pdev->button_dev) - input_unregister_device(pdev->button_dev); -#endif + /* search device_hint[] table if we occupy a slot, by any chance */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) + if (device_hint[hint].pdev == pdev) + device_hint[hint].pdev = NULL; kfree(pdev); } @@ -1199,7 +1166,7 @@ static int pwc_video_close(struct file *file) { struct video_device *vdev = file->private_data; struct pwc_device *pdev; - int i, hint; + int i; PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); @@ -1234,12 +1201,6 @@ static int pwc_video_close(struct file *file) } pdev->vopen--; PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen); - } else { - pwc_cleanup(pdev); - /* search device_hint[] table if we occupy a slot, by any chance */ - for (hint = 0; hint < MAX_DEV_HINTS; hint++) - if (device_hint[hint].pdev == pdev) - device_hint[hint].pdev = NULL; } return 0; @@ -1715,19 +1676,12 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id init_waitqueue_head(&pdev->frameq); pdev->vcompression = pwc_preferred_compression; - /* Allocate video_device structure */ - pdev->vdev = video_device_alloc(); - if (!pdev->vdev) { - PWC_ERROR("Err, cannot allocate video_device struture. Failing probe."); - rc = -ENOMEM; - goto err_free_mem; - } - memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template)); - pdev->vdev->parent = &intf->dev; - pdev->vdev->lock = &pdev->modlock; - pdev->vdev->ioctl_ops = &pwc_ioctl_ops; - strcpy(pdev->vdev->name, name); - video_set_drvdata(pdev->vdev, pdev); + /* Init video_device structure */ + memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template)); + pdev->vdev.parent = &intf->dev; + pdev->vdev.lock = &pdev->modlock; + strcpy(pdev->vdev.name, name); + video_set_drvdata(&pdev->vdev, pdev); pdev->release = le16_to_cpu(udev->descriptor.bcdDevice); PWC_DEBUG_PROBE("Release: %04x\n", pdev->release); @@ -1746,8 +1700,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id } } - pdev->vdev->release = video_device_release; - /* occupy slot */ if (hint < MAX_DEV_HINTS) device_hint[hint].pdev = pdev; @@ -1759,16 +1711,16 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id pwc_set_leds(pdev, 0, 0); pwc_camera_power(pdev, 0); - rc = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr); + rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr); if (rc < 0) { PWC_ERROR("Failed to register as video device (%d).\n", rc); - goto err_video_release; + goto err_free_mem; } - rc = pwc_create_sysfs_files(pdev->vdev); + rc = pwc_create_sysfs_files(pdev); if (rc) goto err_video_unreg; - PWC_INFO("Registered as %s.\n", video_device_node_name(pdev->vdev)); + PWC_INFO("Registered as %s.\n", video_device_node_name(&pdev->vdev)); #ifdef CONFIG_USB_PWC_INPUT_EVDEV /* register webcam snapshot button input device */ @@ -1776,7 +1728,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id if (!pdev->button_dev) { PWC_ERROR("Err, insufficient memory for webcam snapshot button device."); rc = -ENOMEM; - pwc_remove_sysfs_files(pdev->vdev); + pwc_remove_sysfs_files(pdev); goto err_video_unreg; } @@ -1794,7 +1746,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id if (rc) { input_free_device(pdev->button_dev); pdev->button_dev = NULL; - pwc_remove_sysfs_files(pdev->vdev); + pwc_remove_sysfs_files(pdev); goto err_video_unreg; } #endif @@ -1804,10 +1756,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id err_video_unreg: if (hint < MAX_DEV_HINTS) device_hint[hint].pdev = NULL; - video_unregister_device(pdev->vdev); - pdev->vdev = NULL; /* So we don't try to release it below */ -err_video_release: - video_device_release(pdev->vdev); + video_unregister_device(&pdev->vdev); err_free_mem: kfree(pdev); return rc; @@ -1816,10 +1765,8 @@ err_free_mem: /* The user yanked out the cable... */ static void usb_pwc_disconnect(struct usb_interface *intf) { - struct pwc_device *pdev; - int hint; + struct pwc_device *pdev = usb_get_intfdata(intf); - pdev = usb_get_intfdata (intf); mutex_lock(&pdev->modlock); usb_set_intfdata (intf, NULL); if (pdev == NULL) { @@ -1836,30 +1783,25 @@ static void usb_pwc_disconnect(struct usb_interface *intf) } /* We got unplugged; this is signalled by an EPIPE error code */ - if (pdev->vopen) { - PWC_INFO("Disconnected while webcam is in use!\n"); - pdev->error_status = EPIPE; - } + pdev->error_status = EPIPE; + pdev->unplugged = 1; /* Alert waiting processes */ wake_up_interruptible(&pdev->frameq); - /* Wait until device is closed */ - if (pdev->vopen) { - pdev->unplugged = 1; - pwc_iso_stop(pdev); - } else { - /* Device is closed, so we can safely unregister it */ - PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n"); -disconnect_out: - /* search device_hint[] table if we occupy a slot, by any chance */ - for (hint = 0; hint < MAX_DEV_HINTS; hint++) - if (device_hint[hint].pdev == pdev) - device_hint[hint].pdev = NULL; - } + /* No need to keep the urbs around after disconnection */ + pwc_isoc_cleanup(pdev); +disconnect_out: mutex_unlock(&pdev->modlock); - pwc_cleanup(pdev); + + pwc_remove_sysfs_files(pdev); + video_unregister_device(&pdev->vdev); + +#ifdef CONFIG_USB_PWC_INPUT_EVDEV + if (pdev->button_dev) + input_unregister_device(pdev->button_dev); +#endif } diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index e947766..083f8b1 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -162,9 +162,9 @@ struct pwc_imgbuf struct pwc_device { - struct video_device *vdev; + struct video_device vdev; - /* Pointer to our usb_device */ + /* Pointer to our usb_device, may be NULL after unplug */ struct usb_device *udev; int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */ -- cgit v0.10.2 From efc2924e733631a64c0afed8dbba2741d186998c Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 6 Jun 2011 17:12:49 -0700 Subject: drm/i915: Call intel_enable_plane from i9xx_crtc_mode_set (again) This change got placed in the ironlake path instead of the 9xx path during a recent code shuffle. Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 81a9059..aa43e7b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4687,6 +4687,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); + intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); @@ -5217,8 +5218,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); - if (!HAS_PCH_SPLIT(dev)) - intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); -- cgit v0.10.2 From ec6a890dfed7dd245beba5e5bcdfcffbd934c284 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 21 Jun 2011 18:37:59 +0100 Subject: drm/i915: Apply HWSTAM workaround for BSD ring on SandyBridge ...we need to apply exactly the same workaround for missing interrupts from BSD as for the BLT ring, apparently. See also commit 498e720b96379d8ee9c294950a01534a73defcf3 (drm/i915: Fix gen6 (SNB) missed BLT ring interrupts). Reported-and-tested-by: nkalkhof@web.de Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38529 Signed-off-by: Chris Wilson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 9e34a1a..ae2b499 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1749,6 +1749,7 @@ void ironlake_irq_preinstall(struct drm_device *dev) * happens. */ I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT); + I915_WRITE(GEN6_BSD_HWSTAM, ~GEN6_BSD_USER_INTERRUPT); } /* XXX hotplug from PCH */ diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2f967af..5d5def7 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -531,6 +531,7 @@ #define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0 #define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3) +#define GEN6_BSD_HWSTAM 0x12098 #define GEN6_BSD_IMR 0x120a8 #define GEN6_BSD_USER_INTERRUPT (1 << 12) -- cgit v0.10.2 From e92d03bff9a0d0bcbb812c9b1290ca96c9338d45 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 14 Jun 2011 16:43:09 -0700 Subject: Revert "drm/i915: Kill GTT mappings when moving from GTT domain" This reverts commit 4a684a4117abd756291969336af454e8a958802f. Userland has always been required to set the object's domain to GTT before using it through a GTT mapping, it's not something that the kernel is supposed to enforce. (The pagefault support is so that we can handle multiple mappings without userland having to pin across them, not so that userland can use GTT after GPU domains without telling the kernel). Fixes 19.2% +/- 0.8% (n=6) performance regression in cairo-gl firefox-talos-gfx on my T420 latop. Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 94c84d7..c6389de 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1219,11 +1219,11 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) ret = i915_gem_object_bind_to_gtt(obj, 0, true); if (ret) goto unlock; - } - ret = i915_gem_object_set_to_gtt_domain(obj, write); - if (ret) - goto unlock; + ret = i915_gem_object_set_to_gtt_domain(obj, write); + if (ret) + goto unlock; + } if (obj->tiling_mode == I915_TILING_NONE) ret = i915_gem_object_put_fence(obj); @@ -2926,8 +2926,6 @@ i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj) */ wmb(); - i915_gem_release_mmap(obj); - old_write_domain = obj->base.write_domain; obj->base.write_domain = 0; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 20a4cc5..4934cf8 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -187,10 +187,6 @@ i915_gem_object_set_to_gpu_domain(struct drm_i915_gem_object *obj, if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) i915_gem_clflush_object(obj); - /* blow away mappings if mapped through GTT */ - if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_GTT) - i915_gem_release_mmap(obj); - if (obj->base.pending_write_domain) cd->flips |= atomic_read(&obj->pending_flip); -- cgit v0.10.2 From 129b656a0de9a229a72fe4bb6bacd134a1477b44 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 10 Jun 2011 16:05:51 -0700 Subject: PM / Runtime: Update doc: usage count no longer incremented across system PM Commit e8665002477f0278f84f898145b1f141ba26ee26 (PM: Allow pm_runtime_suspend() to succeed during system suspend) removed usage count increment across system PM. Update doc to reflect this. Signed-off-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 654097b..22accb3 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -566,11 +566,6 @@ to do this is: pm_runtime_set_active(dev); pm_runtime_enable(dev); -The PM core always increments the run-time usage counter before calling the -->prepare() callback and decrements it after calling the ->complete() callback. -Hence disabling run-time PM temporarily like this will not cause any run-time -suspend callbacks to be lost. - 7. Generic subsystem callbacks Subsystems may wish to conserve code space by using the set of generic power -- cgit v0.10.2 From 78420884e680da8fbc3240de2d3106437042381e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 18 Jun 2011 19:53:57 +0200 Subject: PM: Update documentation regarding sysdevs The part of Documentation/power/devices.txt regarding sysdevs is not valid any more after commit 2e711c04dbbf7a7732a3f7073b1fc285d12b369d (PM: Remove sysdev suspend, resume and shutdown operations), so remove it. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 8888083..ff923fe 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -549,32 +549,6 @@ callbacks. The other platforms need not implement it or take it into account in any way. -System Devices --------------- -System devices (sysdevs) follow a slightly different API, which can be found in - - include/linux/sysdev.h - drivers/base/sys.c - -System devices will be suspended with interrupts disabled, and after all other -devices have been suspended. On resume, they will be resumed before any other -devices, and also with interrupts disabled. These things occur in special -"sysdev_driver" phases, which affect only system devices. - -Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when -the non-boot CPUs are all offline and IRQs are disabled on the remaining online -CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a -sleep state (or a system image is created). During resume (or after the image -has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs -are enabled on the only online CPU, the non-boot CPUs are enabled, and the -resume_noirq (or thaw_noirq or restore_noirq) phase begins. - -Code to actually enter and exit the system-wide low power state sometimes -involves hardware details that are only known to the boot firmware, and -may leave a CPU running software (from SRAM or flash memory) that monitors -the system and manages its wakeup sequence. - - Device Low Power (suspend) States --------------------------------- Device low-power states aren't standard. One device might only handle -- cgit v0.10.2 From f76b168b6f117a49d36307053e1acbe30580ea5b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sat, 18 Jun 2011 20:22:23 +0200 Subject: PM: Rename dev_pm_info.in_suspend to is_prepared This patch (as1473) renames the "in_suspend" field in struct dev_pm_info to "is_prepared", in preparation for an upcoming change. The new name is more descriptive of what the field really means. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki Cc: stable@kernel.org diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index aa632020..bf5a59a 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -57,7 +57,7 @@ static int async_error; */ void device_pm_init(struct device *dev) { - dev->power.in_suspend = false; + dev->power.is_prepared = false; init_completion(&dev->power.completion); complete_all(&dev->power.completion); dev->power.wakeup = NULL; @@ -91,7 +91,7 @@ void device_pm_add(struct device *dev) pr_debug("PM: Adding info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", dev_name(dev)); mutex_lock(&dpm_list_mtx); - if (dev->parent && dev->parent->power.in_suspend) + if (dev->parent && dev->parent->power.is_prepared) dev_warn(dev, "parent %s should not be sleeping\n", dev_name(dev->parent)); list_add_tail(&dev->power.entry, &dpm_list); @@ -511,7 +511,11 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) dpm_wait(dev->parent, async); device_lock(dev); - dev->power.in_suspend = false; + /* + * This is a fib. But we'll allow new children to be added below + * a resumed device, even if the device hasn't been completed yet. + */ + dev->power.is_prepared = false; if (dev->pwr_domain) { pm_dev_dbg(dev, state, "power domain "); @@ -670,7 +674,7 @@ void dpm_complete(pm_message_t state) struct device *dev = to_device(dpm_prepared_list.prev); get_device(dev); - dev->power.in_suspend = false; + dev->power.is_prepared = false; list_move(&dev->power.entry, &list); mutex_unlock(&dpm_list_mtx); @@ -1042,7 +1046,7 @@ int dpm_prepare(pm_message_t state) put_device(dev); break; } - dev->power.in_suspend = true; + dev->power.is_prepared = true; if (!list_empty(&dev->power.entry)) list_move_tail(&dev->power.entry, &dpm_prepared_list); put_device(dev); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e35a176..aa3cc46 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -375,7 +375,7 @@ static int usb_unbind_interface(struct device *dev) * Just re-enable it without affecting the endpoint toggles. */ usb_enable_interface(udev, intf, false); - } else if (!error && !intf->dev.power.in_suspend) { + } else if (!error && !intf->dev.power.is_prepared) { r = usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); if (r < 0) @@ -960,7 +960,7 @@ void usb_rebind_intf(struct usb_interface *intf) } /* Try to rebind the interface */ - if (!intf->dev.power.in_suspend) { + if (!intf->dev.power.is_prepared) { intf->needs_binding = 0; rc = device_attach(&intf->dev); if (rc < 0) @@ -1107,7 +1107,7 @@ static int usb_resume_interface(struct usb_device *udev, if (intf->condition == USB_INTERFACE_UNBOUND) { /* Carry out a deferred switch to altsetting 0 */ - if (intf->needs_altsetting0 && !intf->dev.power.in_suspend) { + if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) { usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); intf->needs_altsetting0 = 0; diff --git a/include/linux/device.h b/include/linux/device.h index c66111a..553fd37 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -654,13 +654,13 @@ static inline int device_is_registered(struct device *dev) static inline void device_enable_async_suspend(struct device *dev) { - if (!dev->power.in_suspend) + if (!dev->power.is_prepared) dev->power.async_suspend = true; } static inline void device_disable_async_suspend(struct device *dev) { - if (!dev->power.in_suspend) + if (!dev->power.is_prepared) dev->power.async_suspend = false; } diff --git a/include/linux/pm.h b/include/linux/pm.h index 3160648..cc536bd 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -425,7 +425,7 @@ struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; unsigned int async_suspend:1; - unsigned int in_suspend:1; /* Owned by the PM core */ + bool is_prepared:1; /* Owned by the PM core */ spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; -- cgit v0.10.2 From 8440f4b19494467883f8541b7aa28c7bbf6ac92b Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Sat, 18 Jun 2011 20:34:01 +0200 Subject: PM: Free memory bitmaps if opening /dev/snapshot fails When opening /dev/snapshot device, snapshot_open() creates memory bitmaps which are freed in snapshot_release(). But if any of the callbacks called by pm_notifier_call_chain() returns NOTIFY_BAD, open() fails, snapshot_release() is never called and bitmaps are not freed. Next attempt to open /dev/snapshot then triggers BUG_ON() check in create_basic_memory_bitmaps(). This happens e.g. when vmwatchdog module is active on s390x. Signed-off-by: Michal Kubecek Signed-off-by: Rafael J. Wysocki Cc: stable@kernel.org diff --git a/kernel/power/user.c b/kernel/power/user.c index 7d02d33..42ddbc6 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -113,8 +113,10 @@ static int snapshot_open(struct inode *inode, struct file *filp) if (error) pm_notifier_call_chain(PM_POST_RESTORE); } - if (error) + if (error) { + free_basic_memory_bitmaps(); atomic_inc(&snapshot_device_available); + } data->frozen = 0; data->ready = 0; data->platform_support = 0; -- cgit v0.10.2 From 6d0e0e84f66d32c33511984dd3badd32364b863c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sat, 18 Jun 2011 22:42:09 +0200 Subject: PM: Fix async resume following suspend failure The PM core doesn't handle suspend failures correctly when it comes to asynchronously suspended devices. These devices are moved onto the dpm_suspended_list as soon as the corresponding async thread is started up, and they remain on the list even if they fail to suspend or the sleep transition is cancelled before they get suspended. As a result, when the PM core unwinds the transition, it tries to resume the devices even though they were never suspended. This patch (as1474) fixes the problem by adding a new "is_suspended" flag to dev_pm_info. Devices are resumed only if the flag is set. [rjw: * Moved the dev->power.is_suspended check into device_resume(), because we need to complete dev->power.completion and clear dev->power.is_prepared too for devices whose dev->power.is_suspended flags are unset. * Fixed __device_suspend() to avoid setting dev->power.is_suspended if async_error is different from zero.] Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki Cc: stable@kernel.org diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index bf5a59a..06f09bf 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -58,6 +58,7 @@ static int async_error; void device_pm_init(struct device *dev) { dev->power.is_prepared = false; + dev->power.is_suspended = false; init_completion(&dev->power.completion); complete_all(&dev->power.completion); dev->power.wakeup = NULL; @@ -517,6 +518,9 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) */ dev->power.is_prepared = false; + if (!dev->power.is_suspended) + goto Unlock; + if (dev->pwr_domain) { pm_dev_dbg(dev, state, "power domain "); error = pm_op(dev, &dev->pwr_domain->ops, state); @@ -552,6 +556,9 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) } End: + dev->power.is_suspended = false; + + Unlock: device_unlock(dev); complete_all(&dev->power.completion); @@ -839,11 +846,11 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) device_lock(dev); if (async_error) - goto End; + goto Unlock; if (pm_wakeup_pending()) { async_error = -EBUSY; - goto End; + goto Unlock; } if (dev->pwr_domain) { @@ -881,6 +888,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) } End: + dev->power.is_suspended = !error; + + Unlock: device_unlock(dev); complete_all(&dev->power.completion); diff --git a/include/linux/pm.h b/include/linux/pm.h index cc536bd..411e4f4 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -426,6 +426,7 @@ struct dev_pm_info { unsigned int can_wakeup:1; unsigned int async_suspend:1; bool is_prepared:1; /* Owned by the PM core */ + bool is_suspended:1; /* Ditto */ spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; -- cgit v0.10.2 From 4d1518f5668ef1b3dff6c3b30fa761fe5573cdaa Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 21 Jun 2011 23:24:33 +0200 Subject: PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset Commit 85eb8c8d0b0900c073b0e6f89979ac9c439ade1a (PM / Runtime: Generic clock manipulation rountines for runtime PM (v6)) converted the shmobile platform to using generic code for runtime PM clock management, but it changed the behavior for CONFIG_PM_RUNTIME unset incorrectly. Specifically, for CONFIG_PM_RUNTIME unset pm_runtime_clk_notify() should enable clocks for action equal to BUS_NOTIFY_BIND_DRIVER and it should disable them for action equal to BUS_NOTIFY_UNBOUND_DRIVER (instead of BUS_NOTIFY_ADD_DEVICE and BUS_NOTIFY_DEL_DEVICE, respectively). Make this function behave as appropriate. Signed-off-by: Rafael J. Wysocki Acked-by: Magnus Damm diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index eaa8a85..ad367c4 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -387,7 +387,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, clknb = container_of(nb, struct pm_clk_notifier_block, nb); switch (action) { - case BUS_NOTIFY_ADD_DEVICE: + case BUS_NOTIFY_BIND_DRIVER: if (clknb->con_ids[0]) { for (con_id = clknb->con_ids; *con_id; con_id++) enable_clock(dev, *con_id); @@ -395,7 +395,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, enable_clock(dev, NULL); } break; - case BUS_NOTIFY_DEL_DEVICE: + case BUS_NOTIFY_UNBOUND_DRIVER: if (clknb->con_ids[0]) { for (con_id = clknb->con_ids; *con_id; con_id++) disable_clock(dev, *con_id); -- cgit v0.10.2 From ca9c6890b598997165a7c85c001f382c910f12b0 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 21 Jun 2011 23:25:32 +0200 Subject: PM / Domains: Update documentation Commit 4d27e9dcff00a6425d779b065ec8892e4f391661 (PM: Make power domain callbacks take precedence over subsystem ones) forgot to update the device power management documentation to take changes made by it into account. Correct that mistake. Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index ff923fe..64565aa 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -520,33 +520,20 @@ Support for power domains is provided through the pwr_domain field of struct device. This field is a pointer to an object of type struct dev_power_domain, defined in include/linux/pm.h, providing a set of power management callbacks analogous to the subsystem-level and device driver callbacks that are executed -for the given device during all power transitions, in addition to the respective -subsystem-level callbacks. Specifically, the power domain "suspend" callbacks -(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are -executed after the analogous subsystem-level callbacks, while the power domain -"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore, -etc.) are executed before the analogous subsystem-level callbacks. Error codes -returned by the "suspend" and "resume" power domain callbacks are ignored. - -Power domain ->runtime_idle() callback is executed before the subsystem-level -->runtime_idle() callback and the result returned by it is not ignored. Namely, -if it returns error code, the subsystem-level ->runtime_idle() callback will not -be called and the helper function rpm_idle() executing it will return error -code. This mechanism is intended to help platforms where saving device state -is a time consuming operation and should only be carried out if all devices -in the power domain are idle, before turning off the shared power resource(s). -Namely, the power domain ->runtime_idle() callback may return error code until -the pm_runtime_idle() helper (or its asychronous version) has been called for -all devices in the power domain (it is recommended that the returned error code -be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle() -callback from being run prematurely. - -The support for device power domains is only relevant to platforms needing to -use the same subsystem-level (e.g. platform bus type) and device driver power -management callbacks in many different power domain configurations and wanting -to avoid incorporating the support for power domains into the subsystem-level -callbacks. The other platforms need not implement it or take it into account -in any way. +for the given device during all power transitions, instead of the respective +subsystem-level callbacks. Specifically, if a device's pm_domain pointer is +not NULL, the ->suspend() callback from the object pointed to by it will be +executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and +anlogously for all of the remaining callbacks. In other words, power management +domain callbacks, if defined for the given device, always take precedence over +the callbacks provided by the device's subsystem (e.g. bus type). + +The support for device power management domains is only relevant to platforms +needing to use the same device driver power management callbacks in many +different power domain configurations and wanting to avoid incorporating the +support for power domains into subsystem-level callbacks, for example by +modifying the platform bus type. Other platforms need not implement it or take +it into account in any way. Device Low Power (suspend) States -- cgit v0.10.2 From a5f76d5eba157bf637beb2dd18026db2917c512e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 21 Jun 2011 23:47:15 +0200 Subject: PCI / PM: Block races between runtime PM and system sleep After commit e8665002477f0278f84f898145b1f141ba26ee26 (PM: Allow pm_runtime_suspend() to succeed during system suspend) it is possible that a device resumed by the pm_runtime_resume(dev) in pci_pm_prepare() will be suspended immediately from a work item, timer function or otherwise, defeating the very purpose of calling pm_runtime_resume(dev) from there. To prevent that from happening it is necessary to increment the runtime PM usage counter of the device by replacing pm_runtime_resume() with pm_runtime_get_sync(). Moreover, the incremented runtime PM usage counter has to be decremented by the corresponding pci_pm_complete(), via pm_runtime_put_sync(). Signed-off-by: Rafael J. Wysocki Cc: stable@kernel.org Acked-by: Jesse Barnes diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 135df16..46767c5 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -624,7 +624,7 @@ static int pci_pm_prepare(struct device *dev) * system from the sleep state, we'll have to prevent it from signaling * wake-up. */ - pm_runtime_resume(dev); + pm_runtime_get_sync(dev); if (drv && drv->pm && drv->pm->prepare) error = drv->pm->prepare(dev); @@ -638,6 +638,8 @@ static void pci_pm_complete(struct device *dev) if (drv && drv->pm && drv->pm->complete) drv->pm->complete(dev); + + pm_runtime_put_sync(dev); } #else /* !CONFIG_PM_SLEEP */ -- cgit v0.10.2 From c008ba58af24dc5d0d8e9fe6e59d876910254761 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 16 Jun 2011 18:27:09 -0700 Subject: alarmtimers: Handle late rtc module loading The alarmtimers code currently picks a rtc device to use at late init time. However, if your rtc driver is loaded as a module, it may be registered after the alarmtimers late init code, leaving the alarmtimers nonfunctional. This patch moves the the rtcdevice selection to when we actually try to use it, allowing us to make use of rtc modules that may have been loaded at any point since bootup. CC: Thomas Gleixner CC: Meelis Roos Reported-by: Meelis Roos Signed-off-by: John Stultz diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 2d96624..98ecf4e 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -42,15 +42,72 @@ static struct alarm_base { clockid_t base_clockid; } alarm_bases[ALARM_NUMTYPE]; +/* freezer delta & lock used to handle clock_nanosleep triggered wakeups */ +static ktime_t freezer_delta; +static DEFINE_SPINLOCK(freezer_delta_lock); + #ifdef CONFIG_RTC_CLASS /* rtc timer and device for setting alarm wakeups at suspend */ static struct rtc_timer rtctimer; static struct rtc_device *rtcdev; -#endif +static DEFINE_SPINLOCK(rtcdev_lock); -/* freezer delta & lock used to handle clock_nanosleep triggered wakeups */ -static ktime_t freezer_delta; -static DEFINE_SPINLOCK(freezer_delta_lock); +/** + * has_wakealarm - check rtc device has wakealarm ability + * @dev: current device + * @name_ptr: name to be returned + * + * This helper function checks to see if the rtc device can wake + * from suspend. + */ +static int has_wakealarm(struct device *dev, void *name_ptr) +{ + struct rtc_device *candidate = to_rtc_device(dev); + + if (!candidate->ops->set_alarm) + return 0; + if (!device_may_wakeup(candidate->dev.parent)) + return 0; + + *(const char **)name_ptr = dev_name(dev); + return 1; +} + +/** + * alarmtimer_get_rtcdev - Return selected rtcdevice + * + * This function returns the rtc device to use for wakealarms. + * If one has not already been chosen, it checks to see if a + * functional rtc device is available. + */ +static struct rtc_device *alarmtimer_get_rtcdev(void) +{ + struct device *dev; + char *str; + unsigned long flags; + struct rtc_device *ret; + + spin_lock_irqsave(&rtcdev_lock, flags); + if (!rtcdev) { + /* Find an rtc device and init the rtc_timer */ + dev = class_find_device(rtc_class, NULL, &str, has_wakealarm); + /* If we have a device then str is valid. See has_wakealarm() */ + if (dev) { + rtcdev = rtc_class_open(str); + /* + * Drop the reference we got in class_find_device, + * rtc_open takes its own. + */ + put_device(dev); + rtc_timer_init(&rtctimer, NULL, NULL); + } + } + ret = rtcdev; + spin_unlock_irqrestore(&rtcdev_lock, flags); + + return ret; +} +#endif /** @@ -166,6 +223,7 @@ static int alarmtimer_suspend(struct device *dev) struct rtc_time tm; ktime_t min, now; unsigned long flags; + struct rtc_device *rtc; int i; spin_lock_irqsave(&freezer_delta_lock, flags); @@ -173,8 +231,9 @@ static int alarmtimer_suspend(struct device *dev) freezer_delta = ktime_set(0, 0); spin_unlock_irqrestore(&freezer_delta_lock, flags); + rtc = alarmtimer_get_rtcdev(); /* If we have no rtcdev, just return */ - if (!rtcdev) + if (!rtc) return 0; /* Find the soonest timer to expire*/ @@ -199,12 +258,12 @@ static int alarmtimer_suspend(struct device *dev) WARN_ON(min.tv64 < NSEC_PER_SEC); /* Setup an rtc timer to fire that far in the future */ - rtc_timer_cancel(rtcdev, &rtctimer); - rtc_read_time(rtcdev, &tm); + rtc_timer_cancel(rtc, &rtctimer); + rtc_read_time(rtc, &tm); now = rtc_tm_to_ktime(tm); now = ktime_add(now, min); - rtc_timer_start(rtcdev, &rtctimer, now, ktime_set(0, 0)); + rtc_timer_start(rtc, &rtctimer, now, ktime_set(0, 0)); return 0; } @@ -638,65 +697,3 @@ static int __init alarmtimer_init(void) } device_initcall(alarmtimer_init); -#ifdef CONFIG_RTC_CLASS -/** - * has_wakealarm - check rtc device has wakealarm ability - * @dev: current device - * @name_ptr: name to be returned - * - * This helper function checks to see if the rtc device can wake - * from suspend. - */ -static int __init has_wakealarm(struct device *dev, void *name_ptr) -{ - struct rtc_device *candidate = to_rtc_device(dev); - - if (!candidate->ops->set_alarm) - return 0; - if (!device_may_wakeup(candidate->dev.parent)) - return 0; - - *(const char **)name_ptr = dev_name(dev); - return 1; -} - -/** - * alarmtimer_init_late - Late initializing of alarmtimer code - * - * This function locates a rtc device to use for wakealarms. - * Run as late_initcall to make sure rtc devices have been - * registered. - */ -static int __init alarmtimer_init_late(void) -{ - struct device *dev; - char *str; - - /* Find an rtc device and init the rtc_timer */ - dev = class_find_device(rtc_class, NULL, &str, has_wakealarm); - /* If we have a device then str is valid. See has_wakealarm() */ - if (dev) { - rtcdev = rtc_class_open(str); - /* - * Drop the reference we got in class_find_device, - * rtc_open takes its own. - */ - put_device(dev); - } - if (!rtcdev) { - printk(KERN_WARNING "No RTC device found, ALARM timers will" - " not wake from suspend"); - } - rtc_timer_init(&rtctimer, NULL, NULL); - - return 0; -} -#else -static int __init alarmtimer_init_late(void) -{ - printk(KERN_WARNING "Kernel not built with RTC support, ALARM timers" - " will not wake from suspend"); - return 0; -} -#endif -late_initcall(alarmtimer_init_late); -- cgit v0.10.2 From 58fa45973117ab7a79d5b6818275a887867fc4d7 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 21 Jun 2011 08:01:20 +0000 Subject: netconsole: fix build when CONFIG_NETCONSOLE_DYNAMIC is turned on When NETCONSOLE_DYNAMIC=y and CONFIGFS_FS=m, there are build errors in netconsole: drivers/built-in.o: In function `drop_netconsole_target': netconsole.c:(.text+0x1a100f): undefined reference to `config_item_put' drivers/built-in.o: In function `make_netconsole_target': netconsole.c:(.text+0x1a10b9): undefined reference to `config_item_init_type_name' drivers/built-in.o: In function `write_msg': netconsole.c:(.text+0x1a11a4): undefined reference to `config_item_get' netconsole.c:(.text+0x1a1211): undefined reference to `config_item_put' drivers/built-in.o: In function `netconsole_netdev_event': netconsole.c:(.text+0x1a12cc): undefined reference to `config_item_put' netconsole.c:(.text+0x1a12ec): undefined reference to `config_item_get' netconsole.c:(.text+0x1a1366): undefined reference to `config_item_put' drivers/built-in.o: In function `init_netconsole': netconsole.c:(.init.text+0x953a): undefined reference to `config_group_init' netconsole.c:(.init.text+0x9560): undefined reference to `configfs_register_subsystem' drivers/built-in.o: In function `dynamic_netconsole_exit': netconsole.c:(.exit.text+0x809): undefined reference to `configfs_unregister_subsystem' so fix the NETCONSOLE_DYNAMIC depends clause to prevent this. Based on email suggestion from Ben Hutchings. Thanks. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=37992 Reported-by: David Hill Signed-off-by: Randy Dunlap Cc: Ben Hutchings Signed-off-by: David S. Miller diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 19f04a3..93359fa 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3416,7 +3416,8 @@ config NETCONSOLE config NETCONSOLE_DYNAMIC bool "Dynamic reconfiguration of logging targets" - depends on NETCONSOLE && SYSFS && CONFIGFS_FS + depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \ + !(NETCONSOLE=y && CONFIGFS_FS=m) help This option enables the ability to dynamically reconfigure target parameters (interface, IP addresses, port numbers, MAC addresses) -- cgit v0.10.2 From 1c6b39ad3f01514fd8dd84b5b412bafb75c19388 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 16 Jun 2011 18:47:37 -0700 Subject: alarmtimers: Return -ENOTSUPP if no RTC device is present MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Toralf Förster and Richard Weinberger noted that if there is no RTC device, the alarm timers core prints out an annoying "ALARM timers will not wake from suspend" message. This warning has been removed in a previous patch, however the issue still remains: The original idea was to support alarm timers even if there was no rtc device, as long as the system didn't go into suspend. However, after further consideration, communicating to the application that alarmtimers are not fully functional seems like the better solution. So this patch makes it so we return -ENOTSUPP to any posix _ALARM clockid calls if there is no backing RTC device on the system. Further this changes the behavior where when there is no rtc device we will check for one on clock_getres, clock_gettime, timer_create, and timer_nsleep instead of on suspend. CC: Toralf Förster CC: Richard Weinberger CC: Thomas Gleixner Reported-by: Toralf Förster Reported by: Richard Weinberger Signed-off-by: John Stultz diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 98ecf4e..59f369f 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -107,6 +107,9 @@ static struct rtc_device *alarmtimer_get_rtcdev(void) return ret; } +#else +#define alarmtimer_get_rtcdev() (0) +#define rtcdev (0) #endif @@ -231,7 +234,7 @@ static int alarmtimer_suspend(struct device *dev) freezer_delta = ktime_set(0, 0); spin_unlock_irqrestore(&freezer_delta_lock, flags); - rtc = alarmtimer_get_rtcdev(); + rtc = rtcdev; /* If we have no rtcdev, just return */ if (!rtc) return 0; @@ -381,6 +384,9 @@ static int alarm_clock_getres(const clockid_t which_clock, struct timespec *tp) { clockid_t baseid = alarm_bases[clock2alarm(which_clock)].base_clockid; + if (!alarmtimer_get_rtcdev()) + return -ENOTSUPP; + return hrtimer_get_res(baseid, tp); } @@ -395,6 +401,9 @@ static int alarm_clock_get(clockid_t which_clock, struct timespec *tp) { struct alarm_base *base = &alarm_bases[clock2alarm(which_clock)]; + if (!alarmtimer_get_rtcdev()) + return -ENOTSUPP; + *tp = ktime_to_timespec(base->gettime()); return 0; } @@ -410,6 +419,9 @@ static int alarm_timer_create(struct k_itimer *new_timer) enum alarmtimer_type type; struct alarm_base *base; + if (!alarmtimer_get_rtcdev()) + return -ENOTSUPP; + if (!capable(CAP_WAKE_ALARM)) return -EPERM; @@ -444,6 +456,9 @@ static void alarm_timer_get(struct k_itimer *timr, */ static int alarm_timer_del(struct k_itimer *timr) { + if (!rtcdev) + return -ENOTSUPP; + alarm_cancel(&timr->it.alarmtimer); return 0; } @@ -461,6 +476,9 @@ static int alarm_timer_set(struct k_itimer *timr, int flags, struct itimerspec *new_setting, struct itimerspec *old_setting) { + if (!rtcdev) + return -ENOTSUPP; + /* Save old values */ old_setting->it_interval = ktime_to_timespec(timr->it.alarmtimer.period); @@ -600,6 +618,9 @@ static int alarm_timer_nsleep(const clockid_t which_clock, int flags, int ret = 0; struct restart_block *restart; + if (!alarmtimer_get_rtcdev()) + return -ENOTSUPP; + if (!capable(CAP_WAKE_ALARM)) return -EPERM; -- cgit v0.10.2 From 35052cffe0081904f3362c05818db900dd9dc7de Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Jun 2011 10:29:51 +0100 Subject: MN10300: asm/uaccess.h needs to #include linux/kernel.h for might_sleep() MN10300's asm/uaccess.h needs to #include linux/kernel.h to get might_sleep() otherwise it fails to build on MN10300 allyesconfig. This fails in a few places with messages like the following: In file included from security/keys/trusted.c:14: include/linux/uaccess.h: In function '__copy_from_user_nocache': include/linux/uaccess.h:52: error: implicit declaration of function 'might_sleep' Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 3d6e60d..780560b 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -15,6 +15,7 @@ * User space memory access functions */ #include +#include #include #include -- cgit v0.10.2 From b1d7dd80aadb9042e83f9778b484a2f92e0b04d4 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Jun 2011 14:32:05 +0100 Subject: KEYS: Fix error handling in construct_key_and_link() Fix error handling in construct_key_and_link(). If construct_alloc_key() returns an error, it shouldn't pass out through the normal path as the key_serial() called by the kleave() statement will oops when it gets an error code in the pointer: BUG: unable to handle kernel paging request at ffffffffffffff84 IP: [] request_key_and_link+0x4d7/0x52f .. Call Trace: [] request_key+0x41/0x75 [] cifs_get_spnego_key+0x206/0x226 [cifs] [] CIFS_SessSetup+0x511/0x1234 [cifs] [] cifs_setup_session+0x90/0x1ae [cifs] [] cifs_get_smb_ses+0x34b/0x40f [cifs] [] cifs_mount+0x13f/0x504 [cifs] [] cifs_do_mount+0xc4/0x672 [cifs] [] mount_fs+0x69/0x155 [] vfs_kern_mount+0x63/0xa0 [] do_kern_mount+0x4d/0xdf [] do_mount+0x63c/0x69f [] sys_mount+0x88/0xc2 [] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells Acked-by: Jeff Layton Signed-off-by: Linus Torvalds diff --git a/security/keys/request_key.c b/security/keys/request_key.c index 8e319a4..8246532 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -469,7 +469,7 @@ static struct key *construct_key_and_link(struct key_type *type, } else if (ret == -EINPROGRESS) { ret = 0; } else { - key = ERR_PTR(ret); + goto couldnt_alloc_key; } key_put(dest_keyring); @@ -479,6 +479,7 @@ static struct key *construct_key_and_link(struct key_type *type, construction_failed: key_negate_and_link(key, key_negative_timeout, NULL, NULL); key_put(key); +couldnt_alloc_key: key_put(dest_keyring); kleave(" = %d", ret); return ERR_PTR(ret); -- cgit v0.10.2 From 32c90254ed4a0c698caa0794ebb4de63fcc69631 Mon Sep 17 00:00:00 2001 From: Xufeng Zhang Date: Tue, 21 Jun 2011 10:43:39 +0000 Subject: ipv6/udp: Use the correct variable to determine non-blocking condition udpv6_recvmsg() function is not using the correct variable to determine whether or not the socket is in non-blocking operation, this will lead to unexpected behavior when a UDP checksum error occurs. Consider a non-blocking udp receive scenario: when udpv6_recvmsg() is called by sock_common_recvmsg(), MSG_DONTWAIT bit of flags variable in udpv6_recvmsg() is cleared by "flags & ~MSG_DONTWAIT" in this call: err = sk->sk_prot->recvmsg(iocb, sk, msg, size, flags & MSG_DONTWAIT, flags & ~MSG_DONTWAIT, &addr_len); i.e. with udpv6_recvmsg() getting these values: int noblock = flags & MSG_DONTWAIT int flags = flags & ~MSG_DONTWAIT So, when udp checksum error occurs, the execution will go to csum_copy_err, and then the problem happens: csum_copy_err: ............... if (flags & MSG_DONTWAIT) return -EAGAIN; goto try_again; ............... But it will always go to try_again as MSG_DONTWAIT has been cleared from flags at call time -- only noblock contains the original value of MSG_DONTWAIT, so the test should be: if (noblock) return -EAGAIN; This is also consistent with what the ipv4/udp code does. Signed-off-by: Xufeng Zhang Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 41f8c9c..1e7a43f 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -453,7 +453,7 @@ csum_copy_err: } unlock_sock_fast(sk, slow); - if (flags & MSG_DONTWAIT) + if (noblock) return -EAGAIN; goto try_again; } -- cgit v0.10.2 From 9cfaa8def1c795a512bc04f2aec333b03724ca2e Mon Sep 17 00:00:00 2001 From: Xufeng Zhang Date: Tue, 21 Jun 2011 10:43:40 +0000 Subject: udp/recvmsg: Clear MSG_TRUNC flag when starting over for a new packet Consider this scenario: When the size of the first received udp packet is bigger than the receive buffer, MSG_TRUNC bit is set in msg->msg_flags. However, if checksum error happens and this is a blocking socket, it will goto try_again loop to receive the next packet. But if the size of the next udp packet is smaller than receive buffer, MSG_TRUNC flag should not be set, but because MSG_TRUNC bit is not cleared in msg->msg_flags before receive the next packet, MSG_TRUNC is still set, which is wrong. Fix this problem by clearing MSG_TRUNC flag when starting over for a new packet. Signed-off-by: Xufeng Zhang Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index abca870..48cd88e 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1249,6 +1249,9 @@ csum_copy_err: if (noblock) return -EAGAIN; + + /* starting over for a new packet */ + msg->msg_flags &= ~MSG_TRUNC; goto try_again; } diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 1e7a43f..328985c 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -455,6 +455,9 @@ csum_copy_err: if (noblock) return -EAGAIN; + + /* starting over for a new packet */ + msg->msg_flags &= ~MSG_TRUNC; goto try_again; } -- cgit v0.10.2 From c02a02ee4db5cd8b95ee3cc705b535f443612583 Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Mon, 13 Jun 2011 10:23:12 +0800 Subject: powerpc/85xx: fix NAND_CMD_READID read bytes number when nand_get_flash_type() is called, it will read 8 bytes of ID instead of 5, but the driver only read 5 bytes, so kernel will dump error messages like: fsl-lbc ffe124000.localbus: read_byte beyond end of buffer fsl-lbc ffe124000.localbus: read_byte beyond end of buffer fsl-lbc ffe124000.localbus: read_byte beyond end of buffer Signed-off-by: Shaohui Xie Acked-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 0bb254c..33d8aad 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -339,9 +339,9 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, (FIR_OP_UA << FIR_OP1_SHIFT) | (FIR_OP_RBW << FIR_OP2_SHIFT)); out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT); - /* 5 bytes for manuf, device and exts */ - out_be32(&lbc->fbcr, 5); - elbc_fcm_ctrl->read_bytes = 5; + /* nand_get_flash_type() reads 8 bytes of entire ID string */ + out_be32(&lbc->fbcr, 8); + elbc_fcm_ctrl->read_bytes = 8; elbc_fcm_ctrl->use_mdr = 1; elbc_fcm_ctrl->mdr = 0; -- cgit v0.10.2 From f3fed682f78dfab384d3dc3f9ca7a7338a93c142 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 8 Jun 2011 14:03:05 -0500 Subject: powerpc/p1022ds: fix audio-related properties in the device tree On the Freescale P1022DS reference board, the SSI audio controller is connected in "asynchronous" mode to the codec's clocks, so the device tree needs an "fsl,ssi-asynchronous" property. Also remove the clock-frequency property from the wm8776 node, because the clock is enabled only if U-Boot enables it, and U-Boot will set the property if the clock is enabled. A future version of the P1022DS audio driver will configure the clock itself, but for now, the driver should not be told that the clock is running when it isn't. Also fix the FIFO depth to 15, instead of 16. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 4f685a7..98d9426 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -209,8 +209,10 @@ wm8776:codec@1a { compatible = "wlf,wm8776"; reg = <0x1a>; - /* MCLK source is a stand-alone oscillator */ - clock-frequency = <12288000>; + /* + * clock-frequency will be set by U-Boot if + * the clock is enabled. + */ }; }; @@ -280,7 +282,8 @@ codec-handle = <&wm8776>; fsl,playback-dma = <&dma00>; fsl,capture-dma = <&dma01>; - fsl,fifo-depth = <16>; + fsl,fifo-depth = <15>; + fsl,ssi-asynchronous; }; dma@c300 { -- cgit v0.10.2 From 82a9a4809f4cb4ce3f17da99a8150df8455fa096 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 16 Jun 2011 14:09:17 -0500 Subject: powerpc/e500: fix breakage with fsl_rio_mcheck_exception The wrong MCSR bit was being used on e500mc. MCSR_BUS_RBERR only exists on e500v1/v2. Use MCSR_LD on e500mc, and remove all MCSR checking in fsl_rio_mcheck_exception as we now no longer call that function if the appropriate bit in MCSR is not set. If RIO support was enabled at compile-time, but was never probed, just return from fsl_rio_mcheck_exception rather than dereference a NULL pointer. TODO: There is still a remaining, though comparitively minor, issue in that this recovery mechanism will falsely engage if there's an unrelated MCSR_LD event at the same time as a RIO error. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 0ff4ab9..6414a0d 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -425,7 +425,7 @@ int machine_check_e500mc(struct pt_regs *regs) unsigned long reason = mcsr; int recoverable = 1; - if (reason & MCSR_BUS_RBERR) { + if (reason & MCSR_LD) { recoverable = fsl_rio_mcheck_exception(regs); if (recoverable == 1) goto silent_out; diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 5b206a2..b3fd081 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -283,23 +283,24 @@ static void __iomem *rio_regs_win; #ifdef CONFIG_E500 int fsl_rio_mcheck_exception(struct pt_regs *regs) { - const struct exception_table_entry *entry = NULL; - unsigned long reason = mfspr(SPRN_MCSR); - - if (reason & MCSR_BUS_RBERR) { - reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); - if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { - /* Check if we are prepared to handle this fault */ - entry = search_exception_tables(regs->nip); - if (entry) { - pr_debug("RIO: %s - MC Exception handled\n", - __func__); - out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), - 0); - regs->msr |= MSR_RI; - regs->nip = entry->fixup; - return 1; - } + const struct exception_table_entry *entry; + unsigned long reason; + + if (!rio_regs_win) + return 0; + + reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); + if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { + /* Check if we are prepared to handle this fault */ + entry = search_exception_tables(regs->nip); + if (entry) { + pr_debug("RIO: %s - MC Exception handled\n", + __func__); + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), + 0); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; } } -- cgit v0.10.2 From 80629b0b0fd5ca868dc8eced28e6101e39ac2ef6 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 22 Jun 2011 16:24:07 +0200 Subject: [S390] kvm-s390: fix kconfig dependencies A user can create the Kconfig combination !VIRTUALIZATION, S390_GUEST which results in the following warnings: warning: (S390_GUEST) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) warning: (S390_GUEST && VIRTIO_PCI && VIRTIO_BALLOON) selects VIRTIO_RING which has unmet direct dependencies (VIRTUALIZATION && VIRTIO) warning: (S390_GUEST) selects VIRTIO which has unmet direct dependencies (VIRTUALIZATION) warning: (S390_GUEST && VIRTIO_PCI && VIRTIO_BALLOON) selects VIRTIO_RING which has unmet direct dependencies (VIRTUALIZATION && VIRTIO) S390_GUEST has to select VIRTUALIZATION before selecting VIRTIO and friends. Reported-by: Jan Glauber Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 90d77bd..c03fef7 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -579,6 +579,7 @@ config S390_GUEST def_bool y prompt "s390 guest support for KVM (EXPERIMENTAL)" depends on 64BIT && EXPERIMENTAL + select VIRTUALIZATION select VIRTIO select VIRTIO_RING select VIRTIO_CONSOLE -- cgit v0.10.2 From b530ce7a1af5a9355be518557d86b33c6d2cf088 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 22 Jun 2011 16:24:08 +0200 Subject: [S390] s390: enforce HW limits for the initial sampling rate On specific configurations with hwsampler opcontrol --start returns an error on "echo 1 >/dev/oprofile/enable". Turns out that the hw sampling interval is not checked against the hardware limits. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index 5995e9b..5e2ab03 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -151,6 +151,12 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops) if (oprofile_max_interval == 0) return -ENODEV; + /* The initial value should be sane */ + if (oprofile_hw_interval < oprofile_min_interval) + oprofile_hw_interval = oprofile_min_interval; + if (oprofile_hw_interval > oprofile_max_interval) + oprofile_hw_interval = oprofile_max_interval; + if (oprofile_timer_init(ops)) return -ENODEV; -- cgit v0.10.2 From 6815823431296082fa20c2f14007e194424660b8 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 22 Jun 2011 16:24:09 +0200 Subject: [S390] hwsampler: Set a sane default sampling rate The sampling interval for the hardware sampler is specified in cycles. (see SA23-2260-01 The Load-Program-Parameter and the CPU-Measurement Facilities) The current default value will therefore result in millions of samples. This patch changes the default sampling interval to 4M, which will result in ~1500 samples per second on a z196 reducing the overhead of sampling. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index 5e2ab03..0e358c2 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -25,7 +25,7 @@ extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth); #include "hwsampler.h" -#define DEFAULT_INTERVAL 4096 +#define DEFAULT_INTERVAL 4127518 #define DEFAULT_SDBT_BLOCKS 1 #define DEFAULT_SDB_BLOCKS 511 -- cgit v0.10.2 From 859c965149ab5004b58b1fffd98190b6664cb717 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Wed, 22 Jun 2011 16:24:10 +0200 Subject: [S390] allow setting of upper 32 bit in smp_ctl_set_bit The bit shift operation in smp_ctl_set_bit does not specify the type of the shifted bit so integer is used as default. Therefore it is not possible to set bits in the upper 32 bit of the control register if the kernel runs in 64 bit mode. Fix this by specifying the type as unsigned long. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 52420d2..1d55c95 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -262,7 +262,7 @@ void smp_ctl_set_bit(int cr, int bit) memset(&parms.orvals, 0, sizeof(parms.orvals)); memset(&parms.andvals, 0xff, sizeof(parms.andvals)); - parms.orvals[cr] = 1 << bit; + parms.orvals[cr] = 1UL << bit; on_each_cpu(smp_ctl_bit_callback, &parms, 1); } EXPORT_SYMBOL(smp_ctl_set_bit); @@ -276,7 +276,7 @@ void smp_ctl_clear_bit(int cr, int bit) memset(&parms.orvals, 0, sizeof(parms.orvals)); memset(&parms.andvals, 0xff, sizeof(parms.andvals)); - parms.andvals[cr] = ~(1L << bit); + parms.andvals[cr] = ~(1UL << bit); on_each_cpu(smp_ctl_bit_callback, &parms, 1); } EXPORT_SYMBOL(smp_ctl_clear_bit); -- cgit v0.10.2 From 483f1798998ede75b2575cc1813c3d89ba64a34e Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 22 Jun 2011 09:55:01 -0700 Subject: drm/i915: save/resume forcewake lock fixes The lock must be held for the saving and restoring of VGA state. Signed-off-by: Ben Widawsky CC: Alexander Zhaunerchyk CC: Andrey Rahmatullin Reviewed-by: Chris Wilson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 60a94d2..e8152d2 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -678,6 +678,7 @@ void i915_save_display(struct drm_device *dev) } /* VGA state */ + mutex_lock(&dev->struct_mutex); dev_priv->saveVGA0 = I915_READ(VGA0); dev_priv->saveVGA1 = I915_READ(VGA1); dev_priv->saveVGA_PD = I915_READ(VGA_PD); @@ -687,6 +688,7 @@ void i915_save_display(struct drm_device *dev) dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); i915_save_vga(dev); + mutex_unlock(&dev->struct_mutex); } void i915_restore_display(struct drm_device *dev) @@ -780,6 +782,8 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL); else I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + + mutex_lock(&dev->struct_mutex); I915_WRITE(VGA0, dev_priv->saveVGA0); I915_WRITE(VGA1, dev_priv->saveVGA1); I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); @@ -787,6 +791,7 @@ void i915_restore_display(struct drm_device *dev) udelay(150); i915_restore_vga(dev); + mutex_unlock(&dev->struct_mutex); } int i915_save_state(struct drm_device *dev) -- cgit v0.10.2 From 9935d12651c9e54ad266e17cd542ec717ccd0fc8 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 21 Jun 2011 10:48:31 -0500 Subject: rtl8192cu: Fix missing firmware load In commit 3ac5e26a1e935469a8bdae1d624bc3b59d1fcdc5 entitled "rtlwifi: rtl8192c-common: Change common firmware routines for addition of rtl8192se and rtl8192de", the firmware loading code was moved. Unfortunately, some necessary code was dropped for rtl8192cu. The dmesg output shows the following: rtl8192c: Loading firmware file rtlwifi/rtl8192cufw.bin rtl8192c_common:_rtl92c_fw_free_to_go():<0-0> Polling FW ready fail!! REG_MCUFWDL:0x00000006 . rtl8192c_common:rtl92c_download_fw():<0-0> Firmware is not ready to run! In addition, the interface will authenticate and associate, but cannot transfer data. This is reported as Kernel Bug #38012. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index bee7c14..092e342 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -53,6 +53,8 @@ MODULE_FIRMWARE("rtlwifi/rtl8192cufw.bin"); static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) { struct rtl_priv *rtlpriv = rtl_priv(hw); + const struct firmware *firmware; + int err; rtlpriv->dm.dm_initialgain_enable = 1; rtlpriv->dm.dm_flag = 0; @@ -64,6 +66,24 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) ("Can't alloc buffer for fw.\n")); return 1; } + /* request fw */ + err = request_firmware(&firmware, rtlpriv->cfg->fw_name, + rtlpriv->io.dev); + if (err) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Failed to request firmware!\n")); + return 1; + } + if (firmware->size > 0x4000) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Firmware is too big!\n")); + release_firmware(firmware); + return 1; + } + memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size); + rtlpriv->rtlhal.fwsize = firmware->size; + release_firmware(firmware); + return 0; } -- cgit v0.10.2 From 7cdfa4a348b6b199a3189604f2085f1b214b6458 Mon Sep 17 00:00:00 2001 From: "Marius B. Kotsbak" Date: Wed, 22 Jun 2011 05:26:16 +0000 Subject: net/usb: kalmia: Various fixes for better support of non-x86 architectures. -Support for big endian. -Do not use USB buffers at the stack. -Safer/more efficient code for local constants. Signed-off-by: Marius B. Kotsbak Signed-off-by: David S. Miller diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c index d965fb1..d4edeb2 100644 --- a/drivers/net/usb/kalmia.c +++ b/drivers/net/usb/kalmia.c @@ -100,27 +100,35 @@ kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len, static int kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr) { - char init_msg_1[] = + const static char init_msg_1[] = { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00 }; - char init_msg_2[] = + const static char init_msg_2[] = { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4, 0x00, 0x00 }; - char receive_buf[28]; + const static int buflen = 28; + char *usb_buf; int status; - status = kalmia_send_init_packet(dev, init_msg_1, sizeof(init_msg_1) - / sizeof(init_msg_1[0]), receive_buf, 24); + usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL); + if (!usb_buf) + return -ENOMEM; + + memcpy(usb_buf, init_msg_1, 12); + status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1) + / sizeof(init_msg_1[0]), usb_buf, 24); if (status != 0) return status; - status = kalmia_send_init_packet(dev, init_msg_2, sizeof(init_msg_2) - / sizeof(init_msg_2[0]), receive_buf, 28); + memcpy(usb_buf, init_msg_2, 12); + status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2) + / sizeof(init_msg_2[0]), usb_buf, 28); if (status != 0) return status; - memcpy(ethernet_addr, receive_buf + 10, ETH_ALEN); + memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN); + kfree(usb_buf); return status; } @@ -190,7 +198,8 @@ kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) dev_kfree_skb_any(skb); skb = skb2; - done: header_start = skb_push(skb, KALMIA_HEADER_LENGTH); +done: + header_start = skb_push(skb, KALMIA_HEADER_LENGTH); ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12]; ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13]; @@ -201,9 +210,8 @@ kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) header_start[0] = 0x57; header_start[1] = 0x44; content_len = skb->len - KALMIA_HEADER_LENGTH; - header_start[2] = (content_len & 0xff); /* low byte */ - header_start[3] = (content_len >> 8); /* high byte */ + put_unaligned_le16(content_len, &header_start[2]); header_start[4] = ether_type_1; header_start[5] = ether_type_2; @@ -231,13 +239,13 @@ kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb) * Our task here is to strip off framing, leaving skb with one * data frame for the usbnet framework code to process. */ - const u8 HEADER_END_OF_USB_PACKET[] = + const static u8 HEADER_END_OF_USB_PACKET[] = { 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 }; - const u8 EXPECTED_UNKNOWN_HEADER_1[] = + const static u8 EXPECTED_UNKNOWN_HEADER_1[] = { 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 }; - const u8 EXPECTED_UNKNOWN_HEADER_2[] = + const static u8 EXPECTED_UNKNOWN_HEADER_2[] = { 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 }; - u8 i = 0; + int i = 0; /* incomplete header? */ if (skb->len < KALMIA_HEADER_LENGTH) @@ -285,7 +293,7 @@ kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb) /* subtract start header and end header */ usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH); - ether_packet_length = header_start[2] + (header_start[3] << 8); + ether_packet_length = get_unaligned_le16(&header_start[2]); skb_pull(skb, KALMIA_HEADER_LENGTH); /* Some small packets misses end marker */ -- cgit v0.10.2 From 446b23a75804d7ffa4cca2d4d8f0afb822108c7e Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Mon, 20 Jun 2011 12:33:16 +0400 Subject: CIFS: Fix problem with 3.0-rc1 null user mount failure Figured it out: it was broken by b946845a9dc523c759cae2b6a0f6827486c3221a commit - "cifs: cifs_parse_mount_options: do not tokenize mount options in-place". So, as a quick fix I suggest to apply this patch. [PATCH] CIFS: Fix kfree() with constant string in a null user case Signed-off-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 12cf72d..19fdbda 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2937,7 +2937,11 @@ int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, if (volume_info->nullauth) { cFYI(1, "null user"); - volume_info->username = ""; + volume_info->username = kzalloc(1, GFP_KERNEL); + if (volume_info->username == NULL) { + rc = -ENOMEM; + goto out; + } } else if (volume_info->username) { /* BB fixme parse for domain name here */ cFYI(1, "Username: %s", volume_info->username); -- cgit v0.10.2 From 7553e8f2d5161a2b7a9b7a9f37be1b77e735552f Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 22 Jun 2011 18:13:01 -0700 Subject: mm, hotplug: fix error handling in mem_online_node() The error handling in mem_online_node() is incorrect: hotadd_new_pgdat() returns NULL if the new pgdat could not have been allocated and a pointer to it otherwise. mem_online_node() should fail if hotadd_new_pgdat() fails, not the inverse. This fixes an issue when memoryless nodes are not onlined and their sysfs interface is not registered when their first cpu is brought up. The bug was introduced by commit cf23422b9d76 ("cpu/mem hotplug: enable CPUs online before local memory online") iow v2.6.35. Signed-off-by: David Rientjes Reviewed-by: KOSAKI Motohiro Cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 02159c7..78dba9f 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -521,7 +521,7 @@ int mem_online_node(int nid) lock_memory_hotplug(); pgdat = hotadd_new_pgdat(nid, 0); - if (pgdat) { + if (!pgdat) { ret = -ENOMEM; goto out; } -- cgit v0.10.2 From f957db4fcdd8f03e186aa8f041f4049e76ab741c Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 22 Jun 2011 18:13:04 -0700 Subject: mm, hotplug: protect zonelist building with zonelists_mutex Commit 959ecc48fc75 ("mm/memory_hotplug.c: fix building of node hotplug zonelist") does not protect the build_all_zonelists() call with zonelists_mutex as needed. This can lead to races in constructing zonelist ordering if a concurrent build is underway. Protecting this with lock_memory_hotplug() is insufficient since zonelists can be rebuild though sysfs as well. Signed-off-by: David Rientjes Reviewed-by: KOSAKI Motohiro Signed-off-by: Linus Torvalds diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 78dba9f..c46887b 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -498,7 +498,9 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) * The node we allocated has no zone fallback lists. For avoiding * to access not-initialized zonelist, build here. */ + mutex_lock(&zonelists_mutex); build_all_zonelists(NULL); + mutex_unlock(&zonelists_mutex); return pgdat; } -- cgit v0.10.2 From d2a19da79d3ea5b7859248b0f132c479ed4505e2 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 22 Jun 2011 09:58:37 +0200 Subject: ALSA: HDA: Pinfix quirk for HP Z200 Workstation BIOS lists the internal speaker as an internal line-out. Change to internal speaker + model=auto for better auto-mute capabilities. BugLink: http://bugs.launchpad.net/bugs/754964 Reported-by: Marc Legris Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 475ed1e..d21191d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12599,6 +12599,7 @@ static const struct hda_verb alc262_toshiba_rx1_unsol_verbs[] = { */ enum { PINFIX_FSC_H270, + PINFIX_HP_Z200, }; static const struct alc_fixup alc262_fixups[] = { @@ -12611,9 +12612,17 @@ static const struct alc_fixup alc262_fixups[] = { { } } }, + [PINFIX_HP_Z200] = { + .type = ALC_FIXUP_PINS, + .v.pins = (const struct alc_pincfg[]) { + { 0x16, 0x99130120 }, /* internal speaker */ + { } + } + }, }; static const struct snd_pci_quirk alc262_fixup_tbl[] = { + SND_PCI_QUIRK(0x103c, 0x170b, "HP Z200", PINFIX_HP_Z200), SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", PINFIX_FSC_H270), {} }; @@ -12730,6 +12739,8 @@ static const struct snd_pci_quirk alc262_cfg_tbl[] = { ALC262_HP_BPC), SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1500, "HP z series", ALC262_HP_BPC), + SND_PCI_QUIRK(0x103c, 0x170b, "HP Z200", + ALC262_AUTO), SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1700, "HP xw series", ALC262_HP_BPC), SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL), -- cgit v0.10.2 From 5c18e80be9ff362f6523b097d495bb2e2f939946 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 23 Jun 2011 03:15:39 -0700 Subject: net/usb/kalmia: signedness bug in kalmia_bind() "status" should be an int here for the error handling to work. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c index d4edeb2..a9b6c63 100644 --- a/drivers/net/usb/kalmia.c +++ b/drivers/net/usb/kalmia.c @@ -135,7 +135,7 @@ kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr) static int kalmia_bind(struct usbnet *dev, struct usb_interface *intf) { - u8 status; + int status; u8 ethernet_addr[ETH_ALEN]; /* Don't bind to AT command interface */ -- cgit v0.10.2 From 0bb04bf3dfdfe1c981087cdfb0d9d772c3a0ba55 Mon Sep 17 00:00:00 2001 From: William Douglas Date: Thu, 23 Jun 2011 13:38:36 +0100 Subject: mrst_max3110: Change max missing message priority. Change print message to notice instead of error to clean up non critical messages showing on startup. The MAX3111 not being present is a normal path for end user systems. Signed-off-by: William Douglas [rebased on 3.0, switched to dev_dbg()] Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 1bd2845..3be1b0d 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -823,7 +823,7 @@ static int __devinit serial_m3110_probe(struct spi_device *spi) res = RC_TAG; ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); if (ret < 0 || res == 0 || res == 0xffff) { - printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", + dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)", res); ret = -ENODEV; goto err_get_page; -- cgit v0.10.2 From 33b1e6939f5c37ab8e64280fd3d54046607b5c80 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 23 Jun 2011 13:39:00 +0100 Subject: serial: mrst_max3110: initialize waitqueue earlier The driver went to initialize its waitqueue at the start of the main processing thread. However, it is possible that this thread is not scheduled on a CPU before the write function is called which leads to a following error: BUG: spinlock bad magic on CPU#1, swapper/1 lock: f5f3ebdc, .magic: 00000000, .owner: /-1, .owner_cpu: 0 Pid: 1, comm: swapper Not tainted 3.0.0-rc2+ #67 Call Trace: [] spin_bug+0xa3/0xf0 [] do_raw_spin_lock+0x7d/0x150 [] _raw_spin_lock_irqsave+0x4e/0x60 [] __wake_up+0x1b/0x50 [] serial_m3110_con_write+0x55/0x60 [] __call_console_drivers+0x75/0x90 [] _call_console_drivers+0x49/0x80 [] console_unlock+0xca/0x1f0 [] vprintk+0x18f/0x4f0 [] printk+0x18/0x1a [] register_console+0x2e0/0x350 [] uart_add_one_port+0x33e/0x3d0 [] serial_m3110_probe+0x1c2/0x1df [] spi_drv_probe+0x17/0x20 ... Fix this by initializing the waitqueue before the main thread is created. Signed-off-by: Mika Westerberg Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 3be1b0d..a764bf9 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -421,7 +421,6 @@ static int max3110_main_thread(void *_max) int ret = 0; struct circ_buf *xmit = &max->con_xmit; - init_waitqueue_head(wq); pr_info(PR_FMT "start main thread\n"); do { @@ -838,6 +837,8 @@ static int __devinit serial_m3110_probe(struct spi_device *spi) max->con_xmit.head = 0; max->con_xmit.tail = 0; + init_waitqueue_head(&max->wq); + max->main_thread = kthread_run(max3110_main_thread, max, "max3110_main"); if (IS_ERR(max->main_thread)) { -- cgit v0.10.2 From 1b19ca9f0bdab7d5035821e1ec8f39df9a6e3ee0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 22 Jun 2011 11:55:50 +0100 Subject: Fix CPU spinlock lockups on secondary CPU bringup Secondary CPU bringup typically calls calibrate_delay() during its initialization. However, calibrate_delay() modifies a global variable (loops_per_jiffy) used for udelay() and __delay(). A side effect of 71c696b1 ("calibrate: extract fall-back calculation into own helper") introduced in the 2.6.39 merge window means that we end up with a substantial period where loops_per_jiffy is zero. This causes the spinlock debugging code to malfunction: u64 loops = loops_per_jiffy * HZ; for (;;) { for (i = 0; i < loops; i++) { if (arch_spin_trylock(&lock->raw_lock)) return; __delay(1); } ... } by never calling arch_spin_trylock() - resulting in the CPU locking up in an infinite loop inside __spin_lock_debug(). Work around this by only writing to loops_per_jiffy only once we have completed all the calibration decisions. Tested-by: Santosh Shilimkar Signed-off-by: Russell King Cc: (2.6.39-stable) -- Better solutions (such as omitting the calibration for secondary CPUs, or arranging for calibrate_delay() to return the LPJ value and leave it to the caller to decide where to store it) are a possibility, but would be much more invasive into each architecture. I think this is the best solution for -rc and stable, but it should be revisited for the next merge window. init/calibrate.c | 14 ++++++++------ 1 files changed, 8 insertions(+), 6 deletions(-) Signed-off-by: Linus Torvalds diff --git a/init/calibrate.c b/init/calibrate.c index 2568d22..aae2f40 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -245,30 +245,32 @@ recalibrate: void __cpuinit calibrate_delay(void) { + unsigned long lpj; static bool printed; if (preset_lpj) { - loops_per_jiffy = preset_lpj; + lpj = preset_lpj; if (!printed) pr_info("Calibrating delay loop (skipped) " "preset value.. "); } else if ((!printed) && lpj_fine) { - loops_per_jiffy = lpj_fine; + lpj = lpj_fine; pr_info("Calibrating delay loop (skipped), " "value calculated using timer frequency.. "); - } else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) { + } else if ((lpj = calibrate_delay_direct()) != 0) { if (!printed) pr_info("Calibrating delay using timer " "specific routine.. "); } else { if (!printed) pr_info("Calibrating delay loop... "); - loops_per_jiffy = calibrate_delay_converge(); + lpj = calibrate_delay_converge(); } if (!printed) pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); + lpj/(500000/HZ), + (lpj/(5000/HZ)) % 100, lpj); + loops_per_jiffy = lpj; printed = true; } -- cgit v0.10.2 From 1190f6a067bf27b2ee7e06ec0776a17fe0f6c4d8 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 22 Jun 2011 17:33:57 -0400 Subject: cifs: fix wsize negotiation to respect max buffer size and active signing (try #4) Hopefully last version. Base signing check on CAP_UNIX instead of tcon->unix_ext, also clean up the comments a bit more. According to Hongwei Sun's blog posting here: http://blogs.msdn.com/b/openspecification/archive/2009/04/10/smb-maximum-transmit-buffer-size-and-performance-tuning.aspx CAP_LARGE_WRITEX is ignored when signing is active. Also, the maximum size for a write without CAP_LARGE_WRITEX should be the maxBuf that the server sent in the NEGOTIATE request. Fix the wsize negotiation to take this into account. While we're at it, alter the other wsize definitions to use sizeof(WRITE_REQ) to allow for slightly larger amounts of data to potentially be written per request. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 19fdbda..c761935 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2750,21 +2750,21 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, /* * When the server supports very large writes via POSIX extensions, we can - * allow up to 2^24 - PAGE_CACHE_SIZE. + * allow up to 2^24-1, minus the size of a WRITE_AND_X header, not including + * the RFC1001 length. * * Note that this might make for "interesting" allocation problems during - * writeback however (as we have to allocate an array of pointers for the - * pages). A 16M write means ~32kb page array with PAGE_CACHE_SIZE == 4096. + * writeback however as we have to allocate an array of pointers for the + * pages. A 16M write means ~32kb page array with PAGE_CACHE_SIZE == 4096. */ -#define CIFS_MAX_WSIZE ((1<<24) - PAGE_CACHE_SIZE) +#define CIFS_MAX_WSIZE ((1<<24) - 1 - sizeof(WRITE_REQ) + 4) /* - * When the server doesn't allow large posix writes, default to a wsize of - * 128k - PAGE_CACHE_SIZE -- one page less than the largest frame size - * described in RFC1001. This allows space for the header without going over - * that by default. + * When the server doesn't allow large posix writes, only allow a wsize of + * 128k minus the size of the WRITE_AND_X header. That allows for a write up + * to the maximum size described by RFC1002. */ -#define CIFS_MAX_RFC1001_WSIZE (128 * 1024 - PAGE_CACHE_SIZE) +#define CIFS_MAX_RFC1002_WSIZE (128 * 1024 - sizeof(WRITE_REQ) + 4) /* * The default wsize is 1M. find_get_pages seems to return a maximum of 256 @@ -2783,11 +2783,18 @@ cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info) /* can server support 24-bit write sizes? (via UNIX extensions) */ if (!tcon->unix_ext || !(unix_cap & CIFS_UNIX_LARGE_WRITE_CAP)) - wsize = min_t(unsigned int, wsize, CIFS_MAX_RFC1001_WSIZE); + wsize = min_t(unsigned int, wsize, CIFS_MAX_RFC1002_WSIZE); - /* no CAP_LARGE_WRITE_X? Limit it to 16 bits */ - if (!(server->capabilities & CAP_LARGE_WRITE_X)) - wsize = min_t(unsigned int, wsize, USHRT_MAX); + /* + * no CAP_LARGE_WRITE_X or is signing enabled without CAP_UNIX set? + * Limit it to max buffer offered by the server, minus the size of the + * WRITEX header, not including the 4 byte RFC1001 length. + */ + if (!(server->capabilities & CAP_LARGE_WRITE_X) || + (!(server->capabilities & CAP_UNIX) && + (server->sec_mode & (SECMODE_SIGN_ENABLED|SECMODE_SIGN_REQUIRED)))) + wsize = min_t(unsigned int, wsize, + server->maxBuf - sizeof(WRITE_REQ) + 4); /* hard limit of CIFS_MAX_WSIZE */ wsize = min_t(unsigned int, wsize, CIFS_MAX_WSIZE); -- cgit v0.10.2 From f6d96e0da1ee3cfe67b719570fba3bb2ea057131 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Wed, 22 Jun 2011 22:21:48 +0200 Subject: ASoC: imx: Remove unused Kconfig SND_MXC_SOC_SSI entry SND_MXC_SOC_SSI looks to be unused, so kill it. Signed-off-by: Arnaud Patard Acked-by: Sascha Hauer Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig index d8f130d..bb699bb 100644 --- a/sound/soc/imx/Kconfig +++ b/sound/soc/imx/Kconfig @@ -11,9 +11,6 @@ menuconfig SND_IMX_SOC if SND_IMX_SOC -config SND_MXC_SOC_SSI - tristate - config SND_MXC_SOC_FIQ tristate @@ -24,7 +21,6 @@ config SND_MXC_SOC_WM1133_EV1 tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted" depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL select SND_SOC_WM8350 - select SND_MXC_SOC_SSI select SND_MXC_SOC_FIQ help Enable support for audio on the i.MX31ADS with the WM1133-EV1 @@ -34,7 +30,6 @@ config SND_SOC_MX27VIS_AIC32X4 tristate "SoC audio support for Visstrim M10 boards" depends on MACH_IMX27_VISSTRIM_M10 select SND_SOC_TVL320AIC32X4 - select SND_MXC_SOC_SSI select SND_MXC_SOC_MX2 help Say Y if you want to add support for SoC audio on Visstrim SM10 @@ -44,7 +39,6 @@ config SND_SOC_PHYCORE_AC97 tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards" depends on MACH_PCM043 || MACH_PCA100 select SND_SOC_WM9712 - select SND_MXC_SOC_SSI select SND_MXC_SOC_FIQ help Say Y if you want to add support for SoC audio on Phytec phyCORE @@ -57,7 +51,6 @@ config SND_SOC_EUKREA_TLV320 || MACH_EUKREA_MBIMXSD35_BASEBOARD \ || MACH_EUKREA_MBIMXSD51_BASEBOARD select SND_SOC_TLV320AIC23 - select SND_MXC_SOC_SSI select SND_MXC_SOC_FIQ help Enable I2S based access to the TLV320AIC23B codec attached -- cgit v0.10.2 From 96dcabb99b9f63f2b65f2b0bfe5d4eb48f11b177 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Wed, 22 Jun 2011 22:21:49 +0200 Subject: ASoC: imx: add missing module informations - add some modules aliases - add module license to avoid tainted kernel when loading the imx-pcm-audio driver Signed-off-by: Arnaud Patard Acked-by: Sascha Hauer Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c index aab7765..4173b3d 100644 --- a/sound/soc/imx/imx-pcm-dma-mx2.c +++ b/sound/soc/imx/imx-pcm-dma-mx2.c @@ -337,3 +337,5 @@ static void __exit snd_imx_pcm_exit(void) platform_driver_unregister(&imx_pcm_driver); } module_exit(snd_imx_pcm_exit); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-pcm-audio"); diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c index 5b13fec..61fceb0 100644 --- a/sound/soc/imx/imx-ssi.c +++ b/sound/soc/imx/imx-ssi.c @@ -774,4 +774,4 @@ module_exit(imx_ssi_exit); MODULE_AUTHOR("Sascha Hauer, "); MODULE_DESCRIPTION("i.MX I2S/ac97 SoC Interface"); MODULE_LICENSE("GPL"); - +MODULE_ALIAS("platform:imx-ssi"); -- cgit v0.10.2 From 53dea36c70c1857149a8c447224e3936eb8b5339 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 22 Jun 2011 20:48:25 +0200 Subject: ASoC: pxa-ssp: Correct check for stream presence Don't rely on the codec's channels_min information to decide wheter or not allocate a substream's DMA buffer. Rather check if the substream itself was allocated previously. Signed-off-by: Daniel Mack Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c index 2ce0b2d..fab20a5 100644 --- a/sound/soc/pxa/pxa2xx-pcm.c +++ b/sound/soc/pxa/pxa2xx-pcm.c @@ -95,14 +95,14 @@ static int pxa2xx_soc_pcm_new(struct snd_card *card, struct snd_soc_dai *dai, if (!card->dev->coherent_dma_mask) card->dev->coherent_dma_mask = DMA_BIT_MASK(32); - if (dai->driver->playback.channels_min) { + if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, SNDRV_PCM_STREAM_PLAYBACK); if (ret) goto out; } - if (dai->driver->capture.channels_min) { + if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, SNDRV_PCM_STREAM_CAPTURE); if (ret) -- cgit v0.10.2 From 8618ccd352dcd01628f39eb1fca4f9a7bc077ea1 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Wed, 22 Jun 2011 23:29:20 -0700 Subject: drivers/ata/sata_dwc_460ex: Fix typo 'corrresponding' The patch below fixes a typo. Signed-off-by: Justin P. Mattock Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c index 1c4b3aa..dc88a39 100644 --- a/drivers/ata/sata_dwc_460ex.c +++ b/drivers/ata/sata_dwc_460ex.c @@ -389,7 +389,7 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf) /* * Function: get_burst_length_encode * arguments: datalength: length in bytes of data - * returns value to be programmed in register corrresponding to data length + * returns value to be programmed in register corresponding to data length * This value is effectively the log(base 2) of the length */ static int get_burst_length_encode(int datalength) -- cgit v0.10.2 From cd691876d73e24b4c0a2e96993251abbe3a320df Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 22 Jun 2011 12:13:10 +0200 Subject: libata: apply NOSETXFER horkage to the affected Pioneer drives regardless of firmware revision It's unlikely NOSETXFER works for a revision of drive but doesn't for another and pioneer doesn't seem to be fixing firmwares for the affected drives. Apply NOSETXFER to the affected pioneer drives regardless of firmware revision. http://article.gmane.org/gmane.linux.ide/49734 Signed-off-by: Tejun Heo Reported-by: fl-00@gmx.de Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 736bee5..000d03a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4143,9 +4143,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { * Devices which choke on SETXFER. Applies only if both the * device and controller are SATA. */ - { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, - { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER }, - { "PIONEER DVD-RW DVR-216D", "1.08", ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, /* End Marker */ { } -- cgit v0.10.2 From 3f1e046ad3370d22d39529103667354eb50abc08 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Thu, 16 Jun 2011 08:28:36 -0700 Subject: libata/sas: only set FROZEN flag if new EH is supported On 16.06.2011 [08:28:39 -0500], Brian King wrote: > On 06/16/2011 02:51 AM, Tejun Heo wrote: > > On Wed, Jun 15, 2011 at 04:34:17PM -0700, Nishanth Aravamudan wrote: > >>> That looks like the right thing to do. For ipr's usage of > >>> libata, we don't have the concept of a port frozen state, so this flag > >>> should really never get set. The alternate way to fix this would be to > >>> only set ATA_PFLAG_FROZEN in ata_port_alloc if ap->ops->error_handler > >>> is not NULL. > >> > >> It seemed like ipr is as you say, but I wasn't sure if it was > >> appropriate to make the change above in the common libata-scis code or > >> not. I don't want to break some other device on accident. > >> > >> Also, I tried your suggestion, but I don't think that can happen in > >> ata_port_alloc? ata_port_alloc is allocated ap itself, and it seems like > >> ap->ops typically gets set only after ata_port_alloc returns? > > > > Maybe we can test error_handler in ata_sas_port_start()? > > Good point. Since libsas is converted to the new eh now, we would need to have > this test. Commit 7b3a24c57d2eeda8dba9c205342b12689c4679f9 ("ahci: don't enable port irq before handler is registered") caused a regression for CD-ROMs attached to the IPR SATA bus on Power machines: ata_port_alloc: ENTER ata_port_probe: ata1: bus probe begin ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: limiting speed to UDMA7:PIO5 ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: disabled ata_port_probe: ata1: bus probe end scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured The FROZEN flag added in that commit is only cleared by the new EH code, which is not used by ipr. Clear this flag in the SAS code if we don't support new EH. Reported-by: Benjamin Herrenschmidt Signed-off-by: Nishanth Aravamudan Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d51f979..927f968 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3797,6 +3797,12 @@ EXPORT_SYMBOL_GPL(ata_sas_port_alloc); */ int ata_sas_port_start(struct ata_port *ap) { + /* + * the port is marked as frozen at allocation time, but if we don't + * have new eh, we won't thaw it + */ + if (!ap->ops->error_handler) + ap->pflags &= ~ATA_PFLAG_FROZEN; return 0; } EXPORT_SYMBOL_GPL(ata_sas_port_start); -- cgit v0.10.2 From 03ad2d501e7189245bf6bf9dfc2a30511dd50602 Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Wed, 22 Jun 2011 23:20:13 +0200 Subject: rtc: vt8500: Fix build error & cleanup rtc_class_ops->update_irq_enable() Now that the generic code handles UIE mode irqs via periodic alarm interrupts, no one calls the rtc_class_ops->update_irq_enable() method anymore. Further the rtc_class_ops doesn't have a update_irq_enable element anymore, so this causes a build error. This patch removes the driver hooks and implementations of update_irq_enable and the associated setup. [wsa: updated commit-message and removed update_irq_enable-function, too] [jstultz: improve commit message, clarifying build issue] Signed-off-by: Alexey Charkov Signed-off-by: Wolfram Sang Signed-off-by: John Stultz diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c index b8bc862..efd6066 100644 --- a/drivers/rtc/rtc-vt8500.c +++ b/drivers/rtc/rtc-vt8500.c @@ -78,7 +78,6 @@ struct vt8500_rtc { void __iomem *regbase; struct resource *res; int irq_alarm; - int irq_hz; struct rtc_device *rtc; spinlock_t lock; /* Protects this structure */ }; @@ -100,10 +99,6 @@ static irqreturn_t vt8500_rtc_irq(int irq, void *dev_id) if (isr & 1) events |= RTC_AF | RTC_IRQF; - /* Only second/minute interrupts are supported */ - if (isr & 2) - events |= RTC_UF | RTC_IRQF; - rtc_update_irq(vt8500_rtc->rtc, 1, events); return IRQ_HANDLED; @@ -199,27 +194,12 @@ static int vt8500_alarm_irq_enable(struct device *dev, unsigned int enabled) return 0; } -static int vt8500_update_irq_enable(struct device *dev, unsigned int enabled) -{ - struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev); - unsigned long tmp = readl(vt8500_rtc->regbase + VT8500_RTC_CR); - - if (enabled) - tmp |= VT8500_RTC_CR_SM_SEC | VT8500_RTC_CR_SM_ENABLE; - else - tmp &= ~VT8500_RTC_CR_SM_ENABLE; - - writel(tmp, vt8500_rtc->regbase + VT8500_RTC_CR); - return 0; -} - static const struct rtc_class_ops vt8500_rtc_ops = { .read_time = vt8500_rtc_read_time, .set_time = vt8500_rtc_set_time, .read_alarm = vt8500_rtc_read_alarm, .set_alarm = vt8500_rtc_set_alarm, .alarm_irq_enable = vt8500_alarm_irq_enable, - .update_irq_enable = vt8500_update_irq_enable, }; static int __devinit vt8500_rtc_probe(struct platform_device *pdev) @@ -248,13 +228,6 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_free; } - vt8500_rtc->irq_hz = platform_get_irq(pdev, 1); - if (vt8500_rtc->irq_hz < 0) { - dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n"); - ret = -ENXIO; - goto err_free; - } - vt8500_rtc->res = request_mem_region(vt8500_rtc->res->start, resource_size(vt8500_rtc->res), "vt8500-rtc"); @@ -272,9 +245,8 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_release; } - /* Enable the second/minute interrupt generation and enable RTC */ - writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H - | VT8500_RTC_CR_SM_ENABLE | VT8500_RTC_CR_SM_SEC, + /* Enable RTC and set it to 24-hour mode */ + writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H, vt8500_rtc->regbase + VT8500_RTC_CR); vt8500_rtc->rtc = rtc_device_register("vt8500-rtc", &pdev->dev, @@ -286,26 +258,16 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_unmap; } - ret = request_irq(vt8500_rtc->irq_hz, vt8500_rtc_irq, 0, - "rtc 1Hz", vt8500_rtc); - if (ret < 0) { - dev_err(&pdev->dev, "can't get irq %i, err %d\n", - vt8500_rtc->irq_hz, ret); - goto err_unreg; - } - ret = request_irq(vt8500_rtc->irq_alarm, vt8500_rtc_irq, 0, "rtc alarm", vt8500_rtc); if (ret < 0) { dev_err(&pdev->dev, "can't get irq %i, err %d\n", vt8500_rtc->irq_alarm, ret); - goto err_free_hz; + goto err_unreg; } return 0; -err_free_hz: - free_irq(vt8500_rtc->irq_hz, vt8500_rtc); err_unreg: rtc_device_unregister(vt8500_rtc->rtc); err_unmap: @@ -323,7 +285,6 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev) struct vt8500_rtc *vt8500_rtc = platform_get_drvdata(pdev); free_irq(vt8500_rtc->irq_alarm, vt8500_rtc); - free_irq(vt8500_rtc->irq_hz, vt8500_rtc); rtc_device_unregister(vt8500_rtc->rtc); -- cgit v0.10.2 From 7fd29aa920273b70be50c14c4b7e2213fb6623ce Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 23 Jun 2011 23:48:32 +0000 Subject: target: Fix transport_get_lun_for_tmr failure cases This patch fixes two possible NULL pointer dereferences in target v4.0 code where se_tmr release path in core_tmr_release_req() can OOPs upon transport_get_lun_for_tmr() failure by attempting to access se_device or se_tmr->tmr_list without a valid member of se_device->tmr_list during transport_free_se_cmd() release. This patch moves the se_tmr->tmr_dev pointer assignment in transport_get_lun_for_tmr() until after possible -ENODEV failures during unpacked_lun lookup. This addresses an OOPs originally reported with LIO v4.1 upstream on .39 code here: TARGET_CORE[qla2xxx]: Detected NON_EXISTENT_LUN Access for 0x00000000 BUG: unable to handle kernel NULL pointer dereference at 0000000000000550 IP: [] __ticket_spin_trylock+0x4/0x20 PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu23/cache/index2/shared_cpu_map CPU 1 Modules linked in: netconsole target_core_pscsi target_core_file tcm_qla2xxx target_core_iblock tcm_loop target_core_mod configfs ipmi_devintf ipmi_si ipmi_msghandler serio_raw i7core_edac ioatdma dca edac_core ps_bdrv ses enclosure usbhid usb_storage ahci qla2xxx hid uas e1000e mpt2sas libahci mlx4_core scsi_transport_fc scsi_transport_sas raid_class scsi_tgt [last unloaded: netconsole] Pid: 0, comm: kworker/0:0 Tainted: G W 2.6.39+ #1 Xyratex Storage Server RIP: 0010:[] []__ticket_spin_trylock+0x4/0x20 RSP: 0018:ffff88063e803c08 EFLAGS: 00010286 RAX: ffff880619ab45e0 RBX: 0000000000000550 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000550 RBP: ffff88063e803c08 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000568 R13: 0000000000000001 R14: 0000000000000000 R15: ffff88060cd96a20 FS: 0000000000000000(0000) GS:ffff88063e800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000550 CR3: 0000000001a03000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:0 (pid: 0, threadinfo ffff880619ab8000, task ffff880619ab45e0) Stack: ffff88063e803c28 ffffffff812cf039 0000000000000550 0000000000000568 ffff88063e803c58 ffffffff8157071e ffffffffa028a1dc ffff88060f7e4600 0000000000000550 ffff880616961480 ffff88063e803c78 ffffffffa028a1dc Call Trace: [] do_raw_spin_trylock+0x19/0x50 [] _raw_spin_lock+0x3e/0x70 [] ? core_tmr_release_req+0x2c/0x60 [target_core_mod] [] core_tmr_release_req+0x2c/0x60 [target_core_mod] [] transport_free_se_cmd+0x22/0x50 [target_core_mod] [] transport_release_cmd_to_pool+0x20/0x40 [target_core_mod] [] transport_generic_free_cmd+0xa5/0xb0 [target_core_mod] [] tcm_qla2xxx_handle_tmr+0xc4/0xd0 [tcm_qla2xxx] [] __qla24xx_handle_abts+0xd3/0x150 [qla2xxx] [] qla_tgt_response_pkt+0x171/0x520 [qla2xxx] [] qla_tgt_response_pkt_all_vps+0x2d/0x220 [qla2xxx] [] qla24xx_process_response_queue+0x1a3/0x670 [qla2xxx] [] ? qla24xx_atio_pkt+0x81/0x120 [qla2xxx] [] ? qla24xx_msix_default+0x45/0x2a0 [qla2xxx] [] qla24xx_msix_default+0x1b8/0x2a0 [qla2xxx] [] handle_irq_event_percpu+0x54/0x210 [] handle_irq_event+0x48/0x70 [] ? handle_edge_irq+0x1e/0x110 [] handle_edge_irq+0x77/0x110 [] handle_irq+0x22/0x40 [] do_IRQ+0x5d/0xe0 [] common_interrupt+0x13/0x13 [] ? intel_idle+0xd7/0x130 [] ? intel_idle+0xd0/0x130 [] cpuidle_idle_call+0xab/0x1c0 [] cpu_idle+0xab/0xf0 [] start_secondary+0x1cb/0x1d2 Reported-by: Roland Dreier Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 8407f9c..f8d8af7 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -192,7 +192,7 @@ int transport_get_lun_for_tmr( &SE_NODE_ACL(se_sess)->device_list[unpacked_lun]; if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) { se_lun = se_cmd->se_lun = se_tmr->tmr_lun = deve->se_lun; - dev = se_tmr->tmr_dev = se_lun->lun_se_dev; + dev = se_lun->lun_se_dev; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev; @@ -216,6 +216,7 @@ int transport_get_lun_for_tmr( se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; return -1; } + se_tmr->tmr_dev = dev; spin_lock(&dev->se_tmr_lock); list_add_tail(&se_tmr->tmr_list, &dev->dev_tmr_list); diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 59b8b9c..179063d 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -75,10 +75,16 @@ void core_tmr_release_req( { struct se_device *dev = tmr->tmr_dev; + if (!dev) { + kmem_cache_free(se_tmr_req_cache, tmr); + return; + } + spin_lock(&dev->se_tmr_lock); list_del(&tmr->tmr_list); - kmem_cache_free(se_tmr_req_cache, tmr); spin_unlock(&dev->se_tmr_lock); + + kmem_cache_free(se_tmr_req_cache, tmr); } static void core_tmr_handle_tas_abort( -- cgit v0.10.2 From 233888644d80cc44330062e5e978c9e3a14c9cb9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 22 Jun 2011 01:02:21 -0700 Subject: target: Convert transport_deregister_session_configfs nacl_sess_lock to save irq state This patch converts transport_deregister_session_configfs() to save/restore spinlock IRQ state for struct se_node_acl->nacl_sess_lock access as tcm_qla2xxx logic expects to call transport_deregister_session_configfs() code with irq save already held for struct qla_hw_data. Reported-by: Roland Dreier Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4dafeb8..4b9b716 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -536,13 +536,13 @@ EXPORT_SYMBOL(transport_register_session); void transport_deregister_session_configfs(struct se_session *se_sess) { struct se_node_acl *se_nacl; - + unsigned long flags; /* * Used by struct se_node_acl's under ConfigFS to locate active struct se_session */ se_nacl = se_sess->se_node_acl; if ((se_nacl)) { - spin_lock_irq(&se_nacl->nacl_sess_lock); + spin_lock_irqsave(&se_nacl->nacl_sess_lock, flags); list_del(&se_sess->sess_acl_list); /* * If the session list is empty, then clear the pointer. @@ -556,7 +556,7 @@ void transport_deregister_session_configfs(struct se_session *se_sess) se_nacl->acl_sess_list.prev, struct se_session, sess_acl_list); } - spin_unlock_irq(&se_nacl->nacl_sess_lock); + spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags); } } EXPORT_SYMBOL(transport_deregister_session_configfs); -- cgit v0.10.2 From 552523dcbf0f33d44d816da310be8227a2c1502a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 15 Jun 2011 09:41:33 -0700 Subject: target: Fix ERR_PTR dereferencing bugs transport_init_session() and core_tmr_alloc_req() never return NULL, they only return ERR_PTRs on error. v2: Fix patch to return PTR_ERR(tl_nexus->se_sess) from Ankit Jain's feedback. Signed-off-by: Dan Carpenter Signed-off-by: Ankit Jain Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index dee2a2c..d4fee2a9 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -386,7 +386,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc) */ se_cmd->se_tmr_req = core_tmr_alloc_req(se_cmd, (void *)tl_tmr, TMR_LUN_RESET); - if (!se_cmd->se_tmr_req) + if (IS_ERR(se_cmd->se_tmr_req)) goto release; /* * Locate the underlying TCM struct se_lun from sc->device->lun @@ -1017,6 +1017,7 @@ static int tcm_loop_make_nexus( struct se_portal_group *se_tpg; struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba; struct tcm_loop_nexus *tl_nexus; + int ret = -ENOMEM; if (tl_tpg->tl_hba->tl_nexus) { printk(KERN_INFO "tl_tpg->tl_hba->tl_nexus already exists\n"); @@ -1033,8 +1034,10 @@ static int tcm_loop_make_nexus( * Initialize the struct se_session pointer */ tl_nexus->se_sess = transport_init_session(); - if (!tl_nexus->se_sess) + if (IS_ERR(tl_nexus->se_sess)) { + ret = PTR_ERR(tl_nexus->se_sess); goto out; + } /* * Since we are running in 'demo mode' this call with generate a * struct se_node_acl for the tcm_loop struct se_portal_group with the SCSI @@ -1060,7 +1063,7 @@ static int tcm_loop_make_nexus( out: kfree(tl_nexus); - return -ENOMEM; + return ret; } static int tcm_loop_drop_nexus( diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index a3bd57f..03744c2 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -229,7 +229,7 @@ static struct ft_sess *ft_sess_create(struct ft_tport *tport, u32 port_id, return NULL; sess->se_sess = transport_init_session(); - if (!sess->se_sess) { + if (IS_ERR(sess->se_sess)) { kfree(sess); return NULL; } -- cgit v0.10.2 From 5eff5be0b1993f4291f2b8c6d035b408010f96c5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 13 Jun 2011 23:10:49 +0300 Subject: target: Drop bogus ERR_PTR usage in target_fabric_configfs_init In the original code, there were several places inside the target_fabric_configfs_init() function that returned NULL on error and one place the returned an ERR_PTR. There are two places that call this function and they only check for NULL returns; they don't check for ERR_PTRs. So I've changed the ERR_PTR so now the function only returns NULL on error. Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index ee6fad9..b17abd1 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -312,7 +312,7 @@ struct target_fabric_configfs *target_fabric_configfs_init( tf = kzalloc(sizeof(struct target_fabric_configfs), GFP_KERNEL); if (!(tf)) - return ERR_PTR(-ENOMEM); + return NULL; INIT_LIST_HEAD(&tf->tf_list); atomic_set(&tf->tf_access_cnt, 0); -- cgit v0.10.2 From 60d645a4e9e7e7ddc20e534fea82aa4e6947f911 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 15 Jun 2011 10:03:05 -0700 Subject: target: Fix incorrect strlen() NULL terminator checks This patch fixes a number of cases in target core using an incorrectly if (strlen(foo) > SOME_MAX_SIZE) As strlen() returns the number of characters in the string not counting the NULL character at the end. So if you do something like: char buf[10]; if (strlen("0123456789") > 10) return -ETOOLONG; snprintf(buf, 10, "0123456789"); printf("%s\n", buf); then the last "9" gets chopped off and only "012345678" is printed. Plus I threw in one small related cleanup. Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index d4fee2a9..70c2e7f 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -1143,7 +1143,7 @@ static ssize_t tcm_loop_tpg_store_nexus( * the fabric protocol_id set in tcm_loop_make_scsi_hba(), and call * tcm_loop_make_nexus() */ - if (strlen(page) > TL_WWN_ADDR_LEN) { + if (strlen(page) >= TL_WWN_ADDR_LEN) { printk(KERN_ERR "Emulated NAA Sas Address: %s, exceeds" " max: %d\n", page, TL_WWN_ADDR_LEN); return -EINVAL; @@ -1324,7 +1324,7 @@ struct se_wwn *tcm_loop_make_scsi_hba( return ERR_PTR(-EINVAL); check_len: - if (strlen(name) > TL_WWN_ADDR_LEN) { + if (strlen(name) >= TL_WWN_ADDR_LEN) { printk(KERN_ERR "Emulated NAA %s Address: %s, exceeds" " max: %d\n", name, tcm_loop_dump_proto_id(tl_hba), TL_WWN_ADDR_LEN); diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index b17abd1..25c1f49 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -304,7 +304,7 @@ struct target_fabric_configfs *target_fabric_configfs_init( printk(KERN_ERR "Unable to locate passed fabric name\n"); return NULL; } - if (strlen(name) > TARGET_FABRIC_NAME_SIZE) { + if (strlen(name) >= TARGET_FABRIC_NAME_SIZE) { printk(KERN_ERR "Passed name: %s exceeds TARGET_FABRIC" "_NAME_SIZE\n", name); return NULL; @@ -851,7 +851,7 @@ static ssize_t target_core_dev_wwn_store_attr_vpd_unit_serial( return -EOPNOTSUPP; } - if ((strlen(page) + 1) > INQUIRY_VPD_SERIAL_LEN) { + if (strlen(page) >= INQUIRY_VPD_SERIAL_LEN) { printk(KERN_ERR "Emulated VPD Unit Serial exceeds" " INQUIRY_VPD_SERIAL_LEN: %d\n", INQUIRY_VPD_SERIAL_LEN); return -EOVERFLOW; @@ -917,7 +917,7 @@ static ssize_t target_core_dev_wwn_show_attr_vpd_protocol_identifier( transport_dump_vpd_proto_id(vpd, buf, VPD_TMP_BUF_SIZE); - if ((len + strlen(buf) > PAGE_SIZE)) + if ((len + strlen(buf) >= PAGE_SIZE)) break; len += sprintf(page+len, "%s", buf); @@ -962,19 +962,19 @@ static ssize_t target_core_dev_wwn_show_attr_##_name( \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_assoc(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_ident_type(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_ident(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ } \ @@ -1299,7 +1299,7 @@ static ssize_t target_core_dev_pr_show_attr_res_pr_registered_i_pts( &i_buf[0] : "", pr_reg->pr_res_key, pr_reg->pr_res_generation); - if ((len + strlen(buf) > PAGE_SIZE)) + if ((len + strlen(buf) >= PAGE_SIZE)) break; len += sprintf(page+len, "%s", buf); @@ -1496,7 +1496,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(i_port) > PR_APTPL_MAX_IPORT_LEN) { + if (strlen(i_port) >= PR_APTPL_MAX_IPORT_LEN) { printk(KERN_ERR "APTPL metadata initiator_node=" " exceeds PR_APTPL_MAX_IPORT_LEN: %d\n", PR_APTPL_MAX_IPORT_LEN); @@ -1510,7 +1510,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(isid) > PR_REG_ISID_LEN) { + if (strlen(isid) >= PR_REG_ISID_LEN) { printk(KERN_ERR "APTPL metadata initiator_isid" "= exceeds PR_REG_ISID_LEN: %d\n", PR_REG_ISID_LEN); @@ -1571,7 +1571,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(t_port) > PR_APTPL_MAX_TPORT_LEN) { + if (strlen(t_port) >= PR_APTPL_MAX_TPORT_LEN) { printk(KERN_ERR "APTPL metadata target_node=" " exceeds PR_APTPL_MAX_TPORT_LEN: %d\n", PR_APTPL_MAX_TPORT_LEN); @@ -3052,7 +3052,7 @@ static struct config_group *target_core_call_addhbatotarget( int ret; memset(buf, 0, TARGET_CORE_NAME_MAX_LEN); - if (strlen(name) > TARGET_CORE_NAME_MAX_LEN) { + if (strlen(name) >= TARGET_CORE_NAME_MAX_LEN) { printk(KERN_ERR "Passed *name strlen(): %d exceeds" " TARGET_CORE_NAME_MAX_LEN: %d\n", (int)strlen(name), TARGET_CORE_NAME_MAX_LEN); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index f8d8af7..ba698ea 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1431,7 +1431,7 @@ struct se_lun_acl *core_dev_init_initiator_node_lun_acl( struct se_lun_acl *lacl; struct se_node_acl *nacl; - if (strlen(initiatorname) > TRANSPORT_IQN_LEN) { + if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) { printk(KERN_ERR "%s InitiatorName exceeds maximum size.\n", TPG_TFO(tpg)->get_fabric_name()); *ret = -EOVERFLOW; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index a79f518..b662db3 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1916,7 +1916,7 @@ static int __core_scsi3_update_aptpl_buf( pr_reg->pr_res_mapped_lun); } - if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + if ((len + strlen(tmp) >= pr_aptpl_buf_len)) { printk(KERN_ERR "Unable to update renaming" " APTPL metadata\n"); spin_unlock(&T10_RES(su_dev)->registration_lock); @@ -1934,7 +1934,7 @@ static int __core_scsi3_update_aptpl_buf( TPG_TFO(tpg)->tpg_get_tag(tpg), lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count); - if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + if ((len + strlen(tmp) >= pr_aptpl_buf_len)) { printk(KERN_ERR "Unable to update renaming" " APTPL metadata\n"); spin_unlock(&T10_RES(su_dev)->registration_lock); @@ -1986,7 +1986,7 @@ static int __core_scsi3_write_aptpl_to_file( memset(iov, 0, sizeof(struct iovec)); memset(path, 0, 512); - if (strlen(&wwn->unit_serial[0]) > 512) { + if (strlen(&wwn->unit_serial[0]) >= 512) { printk(KERN_ERR "WWN value for struct se_device does not fit" " into path buffer\n"); return -1; -- cgit v0.10.2 From 61db952713a8bc1b18515db3f2eac354ec8990bd Mon Sep 17 00:00:00 2001 From: Kiran Patil Date: Wed, 22 Jun 2011 16:30:22 -0700 Subject: tcm_fc: Fix ft_send_tm LUN lookup OOPs This patch fixes a bug in ft_send_tm() that was incorrectly calling ft_get_lun_for_cmd() -> transport_get_lun_for_cmd(), instead of using transport_get_lun_for_tmr() for the proper struct se_lun lookup that was triggering an OOPs in the se_cmd->tmr_req failure path. This patch fixes the issue by re-arranging the codepath where transport_get_lun_for_tmr() is called after tmr request is allocated and made it available as part of se_cmd. It also drops the now unnecessary ft_get_lun_for_cmd() unpacking code, and uses scsilun_to_int() directly ahead of transport_get_lun_for_cmd() and transport_get_lun_for_tmr() usage. Signed-off-by: Patil, Kiran Signed-off-by: Robert Love Signed-off-by: Nicholas A. Bellinger diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index defff32..7b82f1b 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -144,7 +144,7 @@ enum ft_cmd_state { */ struct ft_cmd { enum ft_cmd_state state; - u16 lun; /* LUN from request */ + u32 lun; /* LUN from request */ struct ft_sess *sess; /* session held for cmd */ struct fc_seq *seq; /* sequence in exchange mgr */ struct se_cmd se_cmd; /* Local TCM I/O descriptor */ diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index c056a11..b2a1067 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -94,29 +94,6 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) 16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0); } -/* - * Get LUN from CDB. - */ -static int ft_get_lun_for_cmd(struct ft_cmd *cmd, u8 *lunp) -{ - u64 lun; - - lun = lunp[1]; - switch (lunp[0] >> 6) { - case 0: - break; - case 1: - lun |= (lunp[0] & 0x3f) << 8; - break; - default: - return -1; - } - if (lun >= TRANSPORT_MAX_LUNS_PER_TPG) - return -1; - cmd->lun = lun; - return transport_get_lun_for_cmd(&cmd->se_cmd, NULL, lun); -} - static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd) { struct se_queue_obj *qobj; @@ -418,6 +395,7 @@ static void ft_send_tm(struct ft_cmd *cmd) { struct se_tmr_req *tmr; struct fcp_cmnd *fcp; + struct ft_sess *sess; u8 tm_func; fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp)); @@ -425,13 +403,6 @@ static void ft_send_tm(struct ft_cmd *cmd) switch (fcp->fc_tm_flags) { case FCP_TMF_LUN_RESET: tm_func = TMR_LUN_RESET; - if (ft_get_lun_for_cmd(cmd, fcp->fc_lun) < 0) { - ft_dump_cmd(cmd, __func__); - transport_send_check_condition_and_sense(&cmd->se_cmd, - cmd->se_cmd.scsi_sense_reason, 0); - ft_sess_put(cmd->sess); - return; - } break; case FCP_TMF_TGT_RESET: tm_func = TMR_TARGET_WARM_RESET; @@ -463,6 +434,36 @@ static void ft_send_tm(struct ft_cmd *cmd) return; } cmd->se_cmd.se_tmr_req = tmr; + + switch (fcp->fc_tm_flags) { + case FCP_TMF_LUN_RESET: + cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun); + if (transport_get_lun_for_tmr(&cmd->se_cmd, cmd->lun) < 0) { + /* + * Make sure to clean up newly allocated TMR request + * since "unable to handle TMR request because failed + * to get to LUN" + */ + FT_TM_DBG("Failed to get LUN for TMR func %d, " + "se_cmd %p, unpacked_lun %d\n", + tm_func, &cmd->se_cmd, cmd->lun); + ft_dump_cmd(cmd, __func__); + sess = cmd->sess; + transport_send_check_condition_and_sense(&cmd->se_cmd, + cmd->se_cmd.scsi_sense_reason, 0); + transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0); + ft_sess_put(sess); + return; + } + break; + case FCP_TMF_TGT_RESET: + case FCP_TMF_CLR_TASK_SET: + case FCP_TMF_ABT_TASK_SET: + case FCP_TMF_CLR_ACA: + break; + default: + return; + } transport_generic_handle_tmr(&cmd->se_cmd); } @@ -635,7 +636,8 @@ static void ft_send_cmd(struct ft_cmd *cmd) fc_seq_exch(cmd->seq)->lp->tt.seq_set_resp(cmd->seq, ft_recv_seq, cmd); - ret = ft_get_lun_for_cmd(cmd, fcp->fc_lun); + cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun); + ret = transport_get_lun_for_cmd(&cmd->se_cmd, NULL, cmd->lun); if (ret < 0) { ft_dump_cmd(cmd, __func__); transport_send_check_condition_and_sense(&cmd->se_cmd, -- cgit v0.10.2 From 7c7cf3b9c31ed09822e5c186297991093ee13c49 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 13 Jun 2011 23:08:46 +0300 Subject: tcm_fc: Fix possible lock to unlock type deadlock There is a typo here, it should be an unlock instead of a lock. The original code will deadlock. Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index 03744c2..7491e21 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -332,7 +332,7 @@ void ft_sess_close(struct se_session *se_sess) lport = sess->tport->lport; port_id = sess->port_id; if (port_id == -1) { - mutex_lock(&ft_lport_lock); + mutex_unlock(&ft_lport_lock); return; } FT_SESS_DBG("port_id %x\n", port_id); -- cgit v0.10.2 From 95efa2863996b643083957079b9304fb3c01130f Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 23 Jun 2011 23:28:46 +0000 Subject: tcm_fc: Fix conversion spec warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes the following conversion specification warning for size_t drivers/target/tcm_fc/tfc_io.c: In function ‘ft_queue_data_in’: drivers/target/tcm_fc/tfc_io.c:209: warning: format ‘%x’ expects type ‘unsigned int’, but argument 5 has type ‘size_t’ Reported-by: Randy Dunlap Reported-by: Stephen Rothwell Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c index 4c3c0ef..8c4a240 100644 --- a/drivers/target/tcm_fc/tfc_io.c +++ b/drivers/target/tcm_fc/tfc_io.c @@ -203,7 +203,7 @@ int ft_queue_data_in(struct se_cmd *se_cmd) /* XXX For now, initiator will retry */ if (printk_ratelimit()) printk(KERN_ERR "%s: Failed to send frame %p, " - "xid <0x%x>, remaining <0x%x>, " + "xid <0x%x>, remaining %zu, " "lso_max <0x%x>\n", __func__, fp, ep->xid, remaining, lport->lso_max); -- cgit v0.10.2 From d698a34da7c5626c3c16a6311c6290522e902e7f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 23 Jun 2011 00:49:29 -0400 Subject: drm/radeon/kms: fix num_banks tiling config for fusion The field is encoded: 0 = 4 banks 1 = 8 banks 2 = 16 banks Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 445af79..12d2fdc 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2013,9 +2013,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev) rdev->config.evergreen.tile_config |= (3 << 0); break; } - /* num banks is 8 on all fusion asics */ + /* num banks is 8 on all fusion asics. 0 = 4, 1 = 8, 2 = 16 */ if (rdev->flags & RADEON_IS_IGP) - rdev->config.evergreen.tile_config |= 8 << 4; + rdev->config.evergreen.tile_config |= 1 << 4; else rdev->config.evergreen.tile_config |= ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4; -- cgit v0.10.2 From ee4017f4ac8163737793cc64df535cd246792887 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 23 Jun 2011 12:19:32 -0400 Subject: drm/radeon/kms: handle special cases for vddc A voltage value of 0xff01 requires that the driver look up the max voltage for the board based using the atom SetVoltage command table. Setting the proper voltage should fix stability on some newer asics. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 27f4557..ef0e0e0 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -179,6 +179,7 @@ void radeon_pm_resume(struct radeon_device *rdev); void radeon_combios_get_power_modes(struct radeon_device *rdev); void radeon_atombios_get_power_modes(struct radeon_device *rdev); void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type); +int radeon_atom_get_max_vddc(struct radeon_device *rdev, u16 *voltage); void rs690_pm_info(struct radeon_device *rdev); extern int rv6xx_get_temp(struct radeon_device *rdev); extern int rv770_get_temp(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1e725d9..bf2b615 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -2320,6 +2320,14 @@ static bool radeon_atombios_parse_pplib_clock_info(struct radeon_device *rdev, le16_to_cpu(clock_info->r600.usVDDC); } + /* patch up vddc if necessary */ + if (rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage == 0xff01) { + u16 vddc; + + if (radeon_atom_get_max_vddc(rdev, &vddc) == 0) + rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage = vddc; + } + if (rdev->flags & RADEON_IS_IGP) { /* skip invalid modes */ if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0) @@ -2630,7 +2638,35 @@ void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 v atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +int radeon_atom_get_max_vddc(struct radeon_device *rdev, + u16 *voltage) +{ + union set_voltage args; + int index = GetIndexIntoMasterTable(COMMAND, SetVoltage); + u8 frev, crev; + + if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev)) + return -EINVAL; + + switch (crev) { + case 1: + return -EINVAL; + case 2: + args.v2.ucVoltageType = SET_VOLTAGE_GET_MAX_VOLTAGE; + args.v2.ucVoltageMode = 0; + args.v2.usVoltageLevel = 0; + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + + *voltage = le16_to_cpu(args.v2.usVoltageLevel); + break; + default: + DRM_ERROR("Unknown table version %d, %d\n", frev, crev); + return -EINVAL; + } + return 0; +} void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev) { -- cgit v0.10.2 From 778e24bb6dd8682318bb496d4bfdc32b501a6420 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 23 Jun 2011 01:34:59 +0000 Subject: xfs: reset inode per-lifetime state when recycling it XFS inodes has several per-lifetime state fields that determine the behaviour of the inode. These state fields are not all reset when an inode is reused from the reclaimable state. This can lead to unexpected behaviour of the new inode such as speculative preallocation not being truncated away in the expected manner for local files until the inode is subsequently truncated, freed or cycles out of the cache. It can also lead to an inode being considered to be a filestream inode or having been truncated when that is not the case. Rework the reinitialisation of the inode when it is recycled to ensure that it is pristine before it is reused. While there, also fix the resetting of state flags in the recycling error paths so the inode does not become unreclaimable. Signed-off-by: Dave Chinner Signed-off-by: Alex Elder diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c index cb9b6d1..3631783 100644 --- a/fs/xfs/xfs_iget.c +++ b/fs/xfs/xfs_iget.c @@ -253,16 +253,21 @@ xfs_iget_cache_hit( rcu_read_lock(); spin_lock(&ip->i_flags_lock); - ip->i_flags &= ~XFS_INEW; - ip->i_flags |= XFS_IRECLAIMABLE; - __xfs_inode_set_reclaim_tag(pag, ip); + ip->i_flags &= ~(XFS_INEW | XFS_IRECLAIM); + ASSERT(ip->i_flags & XFS_IRECLAIMABLE); trace_xfs_iget_reclaim_fail(ip); goto out_error; } spin_lock(&pag->pag_ici_lock); spin_lock(&ip->i_flags_lock); - ip->i_flags &= ~(XFS_IRECLAIMABLE | XFS_IRECLAIM); + + /* + * Clear the per-lifetime state in the inode as we are now + * effectively a new inode and need to return to the initial + * state before reuse occurs. + */ + ip->i_flags &= ~XFS_IRECLAIM_RESET_FLAGS; ip->i_flags |= XFS_INEW; __xfs_inode_clear_reclaim_tag(mp, pag, ip); inode->i_state = I_NEW; diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h index 3ae6d58..964cfea 100644 --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -384,6 +384,16 @@ static inline void xfs_ifunlock(xfs_inode_t *ip) #define XFS_IDIRTY_RELEASE 0x0040 /* dirty release already seen */ /* + * Per-lifetime flags need to be reset when re-using a reclaimable inode during + * inode lookup. Thi prevents unintended behaviour on the new inode from + * ocurring. + */ +#define XFS_IRECLAIM_RESET_FLAGS \ + (XFS_IRECLAIMABLE | XFS_IRECLAIM | \ + XFS_IDIRTY_RELEASE | XFS_ITRUNCATED | \ + XFS_IFILESTREAM); + +/* * Flags for inode locking. * Bit ranges: 1<<1 - 1<<16-1 -- iolock/ilock modes (bitfield) * 1<<16 - 1<<32-1 -- lockdep annotation (integers) -- cgit v0.10.2 From df4368a146d2b350b8398babfe11e2088f741d67 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 23 Jun 2011 01:35:00 +0000 Subject: xfs: clear XFS_IDIRTY_RELEASE on truncate down When an inode is truncated down, speculative preallocation is removed from the inode. This should also reset the state bits for controlling whether preallocation is subsequently removed when the file is next closed. The flag is not being cleared, so repeated operations on a file that first involve a truncate (e.g. multiple repeated dd invocations on a file) give different file layouts for the second and subsequent invocations. Fix this by clearing the XFS_IDIRTY_RELEASE state bit when the XFS_ITRUNCATED bit is detected in xfs_release() and hence ensure that speculative delalloc is removed on files that have been truncated down. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index b7a5fe7..6197207 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -960,8 +960,11 @@ xfs_release( * be exposed to that problem. */ truncated = xfs_iflags_test_and_clear(ip, XFS_ITRUNCATED); - if (truncated && VN_DIRTY(VFS_I(ip)) && ip->i_delayed_blks > 0) - xfs_flush_pages(ip, 0, -1, XBF_ASYNC, FI_NONE); + if (truncated) { + xfs_iflags_clear(ip, XFS_IDIRTY_RELEASE); + if (VN_DIRTY(VFS_I(ip)) && ip->i_delayed_blks > 0) + xfs_flush_pages(ip, 0, -1, XBF_ASYNC, FI_NONE); + } } if (ip->i_d.di_nlink == 0) -- cgit v0.10.2 From 4a33821236f2ef3af0081e8a5eec1301cbed3125 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 23 Jun 2011 01:35:01 +0000 Subject: xfs: prevent bogus assert when trying to remove non-existent attribute If the attribute fork on an inode is in btree format and has multiple levels (i.e node format rather than leaf format), then a lookup failure will trigger an assert failure in xfs_da_path_shift if the flag XFS_DA_OP_OKNOENT is not set. This flag is used to indicate to the directory btree code that not finding an entry is not a fatal error. In the case of doing a lookup for a directory name removal, this is valid as a user cannot insert an arbitrary name to remove from the directory btree. However, in the case of the attribute tree, a user has direct control over the attribute name and can ask for any random name to be removed without any validation. In this case, fsstress is asking for a non-existent user.selinux attribute to be removed, and that is causing xfs_da_path_shift() to fall off the bottom of the tree where it asserts that a lookup failure is allowed. Because the flag is not set, we die a horrible death on a debug enable kernel. Prevent this assert from firing on attribute removes by adding the op_flag XFS_DA_OP_OKNOENT to atribute removal operations. Discovered when testing on a SELinux enabled system by fsstress in test 070 by trying to remove a non-existent user.selinux attribute. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index c863753..01d2072 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -490,6 +490,13 @@ xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags) args.whichfork = XFS_ATTR_FORK; /* + * we have no control over the attribute names that userspace passes us + * to remove, so we have to allow the name lookup prior to attribute + * removal to fail. + */ + args.op_flags = XFS_DA_OP_OKNOENT; + + /* * Attach the dquots to the inode. */ error = xfs_qm_dqattach(dp, 0); -- cgit v0.10.2 From f920fe1cb74191a780d88937f36994231a8faba1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pawe=C5=82=20Drewniak?= Date: Fri, 24 Jun 2011 02:07:35 -0400 Subject: pata_marvell: Add support for 88SE91A0, 88SE91A4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch enables support for Marvell IDE PATA controllers found on Asus P8P67LE motherboard. The formatting has been corrected and I also received a report from two users of this motherboard that the patch works. Signed-off-by: Paweł Drewniak Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 75a6a0c..5d7f58a 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -161,6 +161,9 @@ static const struct pci_device_id marvell_pci_tbl[] = { { PCI_DEVICE(0x11AB, 0x6121), }, { PCI_DEVICE(0x11AB, 0x6123), }, { PCI_DEVICE(0x11AB, 0x6145), }, + { PCI_DEVICE(0x1B4B, 0x91A0), }, + { PCI_DEVICE(0x1B4B, 0x91A4), }, + { } /* terminate list */ }; -- cgit v0.10.2 From 06c8a6a3e40265ff580428bbf51991617477f65b Mon Sep 17 00:00:00 2001 From: Damian Hobson-Garcia Date: Wed, 22 Jun 2011 07:46:25 +0000 Subject: fbdev: sh_mobile_meram: Correct pointer check for YCbCr chroma plane The check was intended to test if we have a valid pointer to write into, but it mistakenly checks the pointer contents instead. Since a valid pointer is mandatory for the chroma data if a YCbCr format is used, the pointer check has been removed. Signed-off-by: Damian Hobson-Garcia Signed-off-by: Paul Mundt diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c index 9170c82..cc7d732 100644 --- a/drivers/video/sh_mobile_meram.c +++ b/drivers/video/sh_mobile_meram.c @@ -218,7 +218,7 @@ static inline void meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata, icb_offset = 0xc0000000 | (cfg->current_reg << 23); *icb_addr_y = icb_offset | (cfg->icb[0].marker_icb << 24); - if ((*icb_addr_c) && is_nvcolor(cfg->pixelformat)) + if (is_nvcolor(cfg->pixelformat)) *icb_addr_c = icb_offset | (cfg->icb[1].marker_icb << 24); } -- cgit v0.10.2 From 7a0ee92b4a510bc2dd026333f90031e883e0cde0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 23 Jun 2011 22:00:20 +0100 Subject: ARM: pm: proc-v7: fix missing struct processor pointers for suspend code Add the missing suspend/resume pointers for the suspend code. This is needed when building for multiple CPUs. Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3c38678..e27c011 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -418,9 +418,9 @@ ENTRY(v7_processor_functions) .word cpu_v7_dcache_clean_area .word cpu_v7_switch_mm .word cpu_v7_set_pte_ext - .word 0 - .word 0 - .word 0 + .word cpu_v7_suspend_size + .word cpu_v7_do_suspend + .word cpu_v7_do_resume .size v7_processor_functions, . - v7_processor_functions .section ".rodata" -- cgit v0.10.2 From 111b20d01346b9635b3223c7af4e40e43bee8dc6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 22 Jun 2011 15:41:58 +0100 Subject: ARM: pm: ensure ARMv7 CPUs save and restore the TLS register Ensure that the TLS register is saved and restored over a suspend cycle, so that userspace programs don't see a corrupted TLS value. Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index e27c011..089c0b5 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -210,19 +210,21 @@ cpu_v7_name: /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size -.equ cpu_v7_suspend_size, 4 * 8 +.equ cpu_v7_suspend_size, 4 * 9 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID mrc p15, 0, r5, c13, c0, 1 @ Context ID + mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID + stmia r0!, {r4 - r6} mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ TTB 0 mrc p15, 0, r8, c2, c0, 1 @ TTB 1 mrc p15, 0, r9, c1, c0, 0 @ Control register mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control - stmia r0, {r4 - r11} + stmia r0, {r6 - r11} ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_v7_do_suspend) @@ -230,9 +232,11 @@ ENTRY(cpu_v7_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache - ldmia r0, {r4 - r11} + ldmia r0!, {r4 - r6} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID mcr p15, 0, r5, c13, c0, 1 @ Context ID + mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID + ldmia r0, {r6 - r11} mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 -- cgit v0.10.2 From b69874e4f530b0103e507f695c010d00cb85a4df Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 Jun 2011 18:57:31 +0100 Subject: ARM: pm: arrange for cpu_proc_init() to be called on resume cpu_proc_init() does processor specific initialization, which we do at boot time. We have been omitting to do this on resume, which causes some of this initialization to be skipped. We've also been skipping this on SMP initialization too. Ensure that cpu_proc_init() is always called appropriately by moving it into cpu_init(), and move cpu_init() to a more appropriate point in the boot initialization. Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index ed11fb0..edcab02 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -342,54 +342,6 @@ static void __init feat_v6_fixup(void) elf_hwcap &= ~HWCAP_TLS; } -static void __init setup_processor(void) -{ - struct proc_info_list *list; - - /* - * locate processor in the list of supported processor - * types. The linker builds this table for us from the - * entries in arch/arm/mm/proc-*.S - */ - list = lookup_processor_type(read_cpuid_id()); - if (!list) { - printk("CPU configuration botched (ID %08x), unable " - "to continue.\n", read_cpuid_id()); - while (1); - } - - cpu_name = list->cpu_name; - -#ifdef MULTI_CPU - processor = *list->proc; -#endif -#ifdef MULTI_TLB - cpu_tlb = *list->tlb; -#endif -#ifdef MULTI_USER - cpu_user = *list->user; -#endif -#ifdef MULTI_CACHE - cpu_cache = *list->cache; -#endif - - printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", - cpu_name, read_cpuid_id(), read_cpuid_id() & 15, - proc_arch[cpu_architecture()], cr_alignment); - - sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS); - sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); - elf_hwcap = list->elf_hwcap; -#ifndef CONFIG_ARM_THUMB - elf_hwcap &= ~HWCAP_THUMB; -#endif - - feat_v6_fixup(); - - cacheid_init(); - cpu_proc_init(); -} - /* * cpu_init - initialise one CPU. * @@ -405,6 +357,8 @@ void cpu_init(void) BUG(); } + cpu_proc_init(); + /* * Define the placement constraint for the inline asm directive below. * In Thumb-2, msr with an immediate value is not allowed. @@ -441,6 +395,54 @@ void cpu_init(void) : "r14"); } +static void __init setup_processor(void) +{ + struct proc_info_list *list; + + /* + * locate processor in the list of supported processor + * types. The linker builds this table for us from the + * entries in arch/arm/mm/proc-*.S + */ + list = lookup_processor_type(read_cpuid_id()); + if (!list) { + printk("CPU configuration botched (ID %08x), unable " + "to continue.\n", read_cpuid_id()); + while (1); + } + + cpu_name = list->cpu_name; + +#ifdef MULTI_CPU + processor = *list->proc; +#endif +#ifdef MULTI_TLB + cpu_tlb = *list->tlb; +#endif +#ifdef MULTI_USER + cpu_user = *list->user; +#endif +#ifdef MULTI_CACHE + cpu_cache = *list->cache; +#endif + + printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", + cpu_name, read_cpuid_id(), read_cpuid_id() & 15, + proc_arch[cpu_architecture()], cr_alignment); + + sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS); + sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); + elf_hwcap = list->elf_hwcap; +#ifndef CONFIG_ARM_THUMB + elf_hwcap &= ~HWCAP_THUMB; +#endif + + feat_v6_fixup(); + + cacheid_init(); + cpu_init(); +} + void __init dump_machine_table(void) { struct machine_desc *p; @@ -913,7 +915,6 @@ void __init setup_arch(char **cmdline_p) #endif reserve_crashkernel(); - cpu_init(); tcm_init(); #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 184a9c9..e9c4727 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -34,7 +34,7 @@ */ #define DCACHELINESIZE 32 - __INIT + .section .text /* * cpu_sa1100_proc_init() @@ -45,8 +45,6 @@ ENTRY(cpu_sa1100_proc_init) mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland mov pc, lr - .section .text - /* * cpu_sa1100_proc_fin() * -- cgit v0.10.2 From 3125af241cdb5a2421aad9f710b2744228a79084 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 Jun 2011 18:59:33 +0100 Subject: ARM: pm: sa1100: no need to re-enable clock switching This is now taken care of by calling cpu_proc_init() in the resume path, so eliminate this unnecessary call. Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index 04f2a61..122ab3c 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -147,5 +147,4 @@ sa1110_sdram_controller_fix: */ .align 5 sa1100_cpu_resume: - mcr p15, 0, r1, c15, c1, 2 @ enable clock switching ldmfd sp!, {r4 - r12, pc} @ return to caller -- cgit v0.10.2 From 6b5f6ab0e1c33beaed828271f13c03ed02ee3c15 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 13:39:44 +0100 Subject: ARM: pm: make MULTI_CPU and !MULTI_CPU resume paths the same Eliminate the differences between MULTI_CPU and non-MULTI_CPU resume paths, making the saved structure identical irrespective of the way the kernel was configured. Acked-by: Frank Hofmann Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 6398ead..97a6577 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -40,9 +40,11 @@ ENTRY(cpu_suspend) #else mov r2, sp @ current virtual SP ldr r0, =cpu_suspend_size + ldr ip, =cpu_do_resume sub sp, sp, r0 @ allocate CPU state on stack mov r0, sp @ save pointer - stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn + add ip, ip, r1 @ convert resume fn to phys + stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn ldr r3, =sleep_save_sp add r2, sp, r1 @ convert SP to phys #ifdef CONFIG_SMP @@ -120,20 +122,12 @@ ENTRY(cpu_resume) ldr r0, sleep_save_sp @ stack phys addr #endif setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off -#ifdef MULTI_CPU @ load v:p, stack, return fn, resume fn ARM( ldmia r0!, {r1, sp, lr, pc} ) THUMB( ldmia r0!, {r1, r2, r3, r4} ) THUMB( mov sp, r2 ) THUMB( mov lr, r3 ) THUMB( bx r4 ) -#else - @ load v:p, stack, return fn - ARM( ldmia r0!, {r1, sp, lr} ) -THUMB( ldmia r0!, {r1, r2, lr} ) -THUMB( mov sp, r2 ) - b cpu_do_resume -#endif ENDPROC(cpu_resume) sleep_save_sp: -- cgit v0.10.2 From 2fefbcd58590cf33189c6178098e12b31b994b5f Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 13:45:34 +0100 Subject: ARM: pm: move return address (for cpu_resume) to top of stack Move the return address for cpu_resume to the top of stack so that cpu_resume looks more like a normal function. Acked-by: Frank Hofmann Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 97a6577..f8e9251 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -15,6 +15,7 @@ * r0-r3,r9,r10,lr corrupted */ ENTRY(cpu_suspend) + stmfd sp!, {r3} mov r9, lr #ifdef MULTI_CPU ldr r10, =processor @@ -24,7 +25,7 @@ ENTRY(cpu_suspend) sub sp, sp, r0 @ allocate CPU state on stack mov r0, sp @ save pointer add ip, ip, r1 @ convert resume fn to phys - stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn + stmfd sp!, {r1, r2, ip} @ save v:p, virt SP, phys resume fn ldr r3, =sleep_save_sp add r2, sp, r1 @ convert SP to phys #ifdef CONFIG_SMP @@ -44,7 +45,7 @@ ENTRY(cpu_suspend) sub sp, sp, r0 @ allocate CPU state on stack mov r0, sp @ save pointer add ip, ip, r1 @ convert resume fn to phys - stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn + stmfd sp!, {r1, r2, ip} @ save v:p, virt SP, phys resume fn ldr r3, =sleep_save_sp add r2, sp, r1 @ convert SP to phys #ifdef CONFIG_SMP @@ -99,7 +100,7 @@ ENDPROC(cpu_resume_turn_mmu_on) cpu_resume_after_mmu: str r5, [r2, r4, lsl #2] @ restore old mapping mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache - mov pc, lr + ldmfd sp!, {pc} ENDPROC(cpu_resume_after_mmu) /* @@ -122,12 +123,11 @@ ENTRY(cpu_resume) ldr r0, sleep_save_sp @ stack phys addr #endif setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off - @ load v:p, stack, return fn, resume fn - ARM( ldmia r0!, {r1, sp, lr, pc} ) -THUMB( ldmia r0!, {r1, r2, r3, r4} ) + @ load v:p, stack, resume fn + ARM( ldmia r0!, {r1, sp, pc} ) +THUMB( ldmia r0!, {r1, r2, r3} ) THUMB( mov sp, r2 ) -THUMB( mov lr, r3 ) -THUMB( bx r4 ) +THUMB( bx r3 ) ENDPROC(cpu_resume) sleep_save_sp: -- cgit v0.10.2 From 3fd431bd0cbc75a506b90b42619de3b04fe813a7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 13:53:06 +0100 Subject: ARM: pm: extract common code from MULTI_CPU/!MULTI_CPU paths Very little code is different between these two paths now, so extract the common code. Acked-by: Frank Hofmann Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index f8e9251..0a778c3 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -19,29 +19,13 @@ ENTRY(cpu_suspend) mov r9, lr #ifdef MULTI_CPU ldr r10, =processor - mov r2, sp @ current virtual SP ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function - sub sp, sp, r0 @ allocate CPU state on stack - mov r0, sp @ save pointer - add ip, ip, r1 @ convert resume fn to phys - stmfd sp!, {r1, r2, ip} @ save v:p, virt SP, phys resume fn - ldr r3, =sleep_save_sp - add r2, sp, r1 @ convert SP to phys -#ifdef CONFIG_SMP - ALT_SMP(mrc p15, 0, lr, c0, c0, 5) - ALT_UP(mov lr, #0) - and lr, lr, #15 - str r2, [r3, lr, lsl #2] @ save phys SP #else - str r2, [r3] @ save phys SP -#endif - mov lr, pc - ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state -#else - mov r2, sp @ current virtual SP ldr r0, =cpu_suspend_size ldr ip, =cpu_do_resume +#endif + mov r2, sp @ current virtual SP sub sp, sp, r0 @ allocate CPU state on stack mov r0, sp @ save pointer add ip, ip, r1 @ convert resume fn to phys @@ -56,6 +40,10 @@ ENTRY(cpu_suspend) #else str r2, [r3] @ save phys SP #endif +#ifdef MULTI_CPU + mov lr, pc + ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state +#else bl cpu_do_suspend #endif -- cgit v0.10.2 From 5fa94c812c0001ac7c3d8868e956ec514734a352 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 15:04:14 +0100 Subject: ARM: pm: preserve r4 - r11 across a suspend Make cpu_suspend()..return function preserve r4 to r11 across a suspend cycle. This is in preparation of relieving platform support code from this task. Acked-by: Frank Hofmann Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 0a778c3..8dbca93 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -12,10 +12,11 @@ * r1 = v:p offset * r3 = virtual return function * Note: sp is decremented to allocate space for CPU state on stack - * r0-r3,r9,r10,lr corrupted + * r0-r3,ip,lr corrupted */ ENTRY(cpu_suspend) stmfd sp!, {r3} + stmfd sp!, {r4 - r11} mov r9, lr #ifdef MULTI_CPU ldr r10, =processor @@ -88,7 +89,7 @@ ENDPROC(cpu_resume_turn_mmu_on) cpu_resume_after_mmu: str r5, [r2, r4, lsl #2] @ restore old mapping mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache - ldmfd sp!, {pc} + ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) /* -- cgit v0.10.2 From 8111eaa6d424ab3ba8a4d7a3148d4681ae5c6ae3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 15:25:11 +0100 Subject: ARM: pm: reallocate registers to avoid r2, r3 Avoid using r2 and r3 in the suspend code, allowing these to be passed further into the function as arguments. Acked-by: Frank Hofmann Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 8dbca93..358be13 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -20,26 +20,26 @@ ENTRY(cpu_suspend) mov r9, lr #ifdef MULTI_CPU ldr r10, =processor - ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state + ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function #else - ldr r0, =cpu_suspend_size + ldr r5, =cpu_suspend_size ldr ip, =cpu_do_resume #endif - mov r2, sp @ current virtual SP - sub sp, sp, r0 @ allocate CPU state on stack + mov r6, sp @ current virtual SP + sub sp, sp, r5 @ allocate CPU state on stack mov r0, sp @ save pointer add ip, ip, r1 @ convert resume fn to phys - stmfd sp!, {r1, r2, ip} @ save v:p, virt SP, phys resume fn - ldr r3, =sleep_save_sp - add r2, sp, r1 @ convert SP to phys + stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn + ldr r5, =sleep_save_sp + add r6, sp, r1 @ convert SP to phys #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, lr, c0, c0, 5) ALT_UP(mov lr, #0) and lr, lr, #15 - str r2, [r3, lr, lsl #2] @ save phys SP + str r6, [r5, lr, lsl #2] @ save phys SP #else - str r2, [r3] @ save phys SP + str r6, [r5] @ save phys SP #endif #ifdef MULTI_CPU mov lr, pc -- cgit v0.10.2 From 3799bbe57843d279008c9ec3406838966cad5f15 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 15:28:40 +0100 Subject: ARM: pm: rejig suspend follow-on function calling convention Save the suspend function pointer onto the stack for use when returning. Allocate r2 to pass an argument to the suspend function. Acked-by: Frank Hofmann Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 358be13..b924bcc 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -10,6 +10,7 @@ /* * Save CPU state for a suspend * r1 = v:p offset + * r2 = suspend function arg0 * r3 = virtual return function * Note: sp is decremented to allocate space for CPU state on stack * r0-r3,ip,lr corrupted @@ -17,7 +18,6 @@ ENTRY(cpu_suspend) stmfd sp!, {r3} stmfd sp!, {r4 - r11} - mov r9, lr #ifdef MULTI_CPU ldr r10, =processor ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state @@ -33,6 +33,7 @@ ENTRY(cpu_suspend) stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn ldr r5, =sleep_save_sp add r6, sp, r1 @ convert SP to phys + stmfd sp!, {r2, lr} @ save suspend func arg and pointer #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, lr, c0, c0, 5) ALT_UP(mov lr, #0) @@ -51,12 +52,12 @@ ENTRY(cpu_suspend) @ flush data cache #ifdef MULTI_CACHE ldr r10, =cpu_cache - mov lr, r9 + mov lr, pc ldr pc, [r10, #CACHE_FLUSH_KERN_ALL] #else - mov lr, r9 - b __cpuc_flush_kern_all + bl __cpuc_flush_kern_all #endif + ldmfd sp!, {r0, pc} @ call suspend fn ENDPROC(cpu_suspend) .ltorg -- cgit v0.10.2 From dbc125168fd7dda4ffb24a29548746c7bd3b3d87 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 15:52:47 +0100 Subject: ARM: pm: move sa1100 to use proper suspend func arg0 In the previous commit, we introduced an official way to supply an argument to the suspend function. Convert the sa1100 suspend code to use this method. Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 6f53688..613ddfa 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -59,7 +59,7 @@ ENTRY(pxa27x_cpu_suspend) mra r2, r3, acc0 #endif stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r4, r0 @ save sleep mode + mov r2, r0 @ save sleep mode ldr r3, =pxa_cpu_resume @ resume function bl cpu_suspend @@ -67,7 +67,7 @@ ENTRY(pxa27x_cpu_suspend) @ (also workaround for sighting 28071) @ prepare value for sleep mode - mov r1, r4 @ sleep mode + mov r1, r0 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -109,11 +109,11 @@ ENTRY(pxa27x_cpu_suspend) ENTRY(pxa25x_cpu_suspend) stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r4, r0 @ save sleep mode + mov r2, r0 @ save sleep mode ldr r3, =pxa_cpu_resume @ resume function bl cpu_suspend @ prepare value for sleep mode - mov r1, r4 @ sleep mode + mov r1, r0 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 -- cgit v0.10.2 From e8856a8797e76e6883ae81f8f9ecbb231cc535df Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 15:58:34 +0100 Subject: ARM: pm: convert cpu_suspend() to a normal function cpu_suspend() has a weird calling method which makes it only possible to call from assembly code: it returns with a modified stack pointer to finish the suspend, but on resume, it 'returns' via a provided pointer. We can make cpu_suspend() appear to be a normal function merely by swapping the resume pointer argument and the link register. Do so, and update all callers to take account of this more traditional behaviour. Acked-by: Frank Hofmann Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 832888d..50be605 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -106,6 +106,8 @@ extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); extern void cpu_init(void); +extern void cpu_suspend(int, long, unsigned long, void (*)(unsigned long)); +extern void cpu_resume(void); void arm_machine_restart(char mode, const char *cmd); extern void (*arm_pm_restart)(char str, const char *cmd); diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index b924bcc..e062677 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -11,13 +11,11 @@ * Save CPU state for a suspend * r1 = v:p offset * r2 = suspend function arg0 - * r3 = virtual return function - * Note: sp is decremented to allocate space for CPU state on stack - * r0-r3,ip,lr corrupted + * r3 = suspend function + * Note: does not return until system resumes */ ENTRY(cpu_suspend) - stmfd sp!, {r3} - stmfd sp!, {r4 - r11} + stmfd sp!, {r4 - r11, lr} #ifdef MULTI_CPU ldr r10, =processor ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state @@ -33,7 +31,7 @@ ENTRY(cpu_suspend) stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn ldr r5, =sleep_save_sp add r6, sp, r1 @ convert SP to phys - stmfd sp!, {r2, lr} @ save suspend func arg and pointer + stmfd sp!, {r2, r3} @ save suspend func arg and pointer #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, lr, c0, c0, 5) ALT_UP(mov lr, #0) diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S index 6b62425..d9a2287 100644 --- a/arch/arm/mach-exynos4/sleep.S +++ b/arch/arm/mach-exynos4/sleep.S @@ -42,16 +42,15 @@ ENTRY(s3c_cpu_save) stmfd sp!, { r3 - r12, lr } - ldr r3, =resume_with_mmu + adr r3, BSYM(exynos4_finish_suspend) bl cpu_suspend + ldmfd sp!, { r3 - r12, pc } +exynos4_finish_suspend: ldr r0, =pm_cpu_sleep ldr r0, [ r0 ] mov pc, r0 -resume_with_mmu: - ldmfd sp!, { r3 - r12, pc } - .ltorg /* diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 613ddfa..3a67887 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -35,9 +35,11 @@ ENTRY(pxa3xx_cpu_suspend) #endif stmfd sp!, {r2 - r12, lr} @ save registers on stack mov r1, r0 - ldr r3, =pxa_cpu_resume @ resume function + adr r3, BSYM(pxa3xx_finish_suspend) bl cpu_suspend + b pxa_cpu_resume +pxa3xx_finish_suspend: mov r0, #0x06 @ S2D3C4 mode mcr p14, 0, r0, c7, c0, 0 @ enter sleep @@ -60,9 +62,11 @@ ENTRY(pxa27x_cpu_suspend) #endif stmfd sp!, {r2 - r12, lr} @ save registers on stack mov r2, r0 @ save sleep mode - ldr r3, =pxa_cpu_resume @ resume function + adr r3, BSYM(pxa27x_finish_suspend) bl cpu_suspend + b pxa_cpu_resume +pxa27x_finish_suspend: @ Put the processor to sleep @ (also workaround for sighting 28071) @@ -110,8 +114,11 @@ ENTRY(pxa27x_cpu_suspend) ENTRY(pxa25x_cpu_suspend) stmfd sp!, {r2 - r12, lr} @ save registers on stack mov r2, r0 @ save sleep mode - ldr r3, =pxa_cpu_resume @ resume function + adr r3, BSYM(pxa25x_finish_suspend) bl cpu_suspend + b pxa_cpu_resume + +pxa25x_finish_suspend: @ prepare value for sleep mode mov r1, r0 @ sleep mode diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index 1f87732..dc4f582 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -36,18 +36,15 @@ ENTRY(s3c_cpu_save) stmfd sp!, { r4 - r12, lr } - ldr r3, =resume_with_mmu + adr r3, BSYM(s3c64xx_finish_suspend) bl cpu_suspend + ldmfd sp!, { r4 - r12, pc } +s3c64xx_finish_suspend: @@ call final suspend code ldr r0, =pm_cpu_sleep ldr pc, [r0] - @@ return to the caller, after the MMU is turned on. - @@ restore the last bits of the stack and return. -resume_with_mmu: - ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save - /* Sleep magic, the word before the resume entry point so that the * bootloader can check for a resumeable image. */ diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index a3d6494..1182fc8 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -41,16 +41,15 @@ ENTRY(s3c_cpu_save) stmfd sp!, { r3 - r12, lr } - ldr r3, =resume_with_mmu + adr r3, BSYM(s5pv210_finish_suspend) bl cpu_suspend + ldmfd sp!, { r3 - r12, pc } +s5pv210_finish_suspend: ldr r0, =pm_cpu_sleep ldr r0, [ r0 ] mov pc, r0 -resume_with_mmu: - ldmfd sp!, { r3 - r12, pc } - .ltorg /* sleep magic, to allow the bootloader to check for an valid diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index 122ab3c..f3fe397 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -31,9 +31,11 @@ ENTRY(sa1100_cpu_suspend) stmfd sp!, {r4 - r12, lr} @ save registers on stack mov r1, r0 - ldr r3, =sa1100_cpu_resume @ return function + adr r3, BSYM(sa1100_finish_suspend) bl cpu_suspend + ldmfd sp!, {r4 - r12, pc} @ return to caller +sa1100_finish_suspend: @ disable clock switching mcr p15, 0, r1, c15, c2, 2 @@ -139,12 +141,3 @@ sa1110_sdram_controller_fix: str r13, [r12] 20: b 20b @ loop waiting for sleep - -/* - * cpu_sa1100_resume() - * - * entry point from bootloader into kernel during resume - */ - .align 5 -sa1100_cpu_resume: - ldmfd sp!, {r4 - r12, pc} @ return to caller diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index fd7032f..f822e62 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -49,21 +49,17 @@ ENTRY(s3c_cpu_save) stmfd sp!, { r4 - r12, lr } - ldr r3, =resume_with_mmu + adr r3, BSYM(s3c24xx_finish_suspend) bl cpu_suspend + ldmfd sp!, { r4 - r12, pc } +s3c24xx_finish_suspend: @@ jump to final code to send system to sleep ldr r0, =pm_cpu_sleep @@ldr pc, [ r0 ] ldr r0, [ r0 ] mov pc, r0 - @@ return to the caller, after having the MMU - @@ turned on, this restores the last bits from the - @@ stack -resume_with_mmu: - ldmfd sp!, { r4 - r12, pc } - .ltorg /* sleep magic, to allow the bootloader to check for an valid -- cgit v0.10.2 From 14cd8fd574bce1cfbe510ccb1f73c7c1024d770f Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 Jun 2011 16:32:58 +0100 Subject: ARM: pm: move cpu_init() call into core code As we have core code dealing with CPU suspend/resume, we can re-initialize the CPUs exception banked registers via that code rather than having platforms deal with that level of detail. So, move the call to cpu_init() out of platform code into core code. Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index e062677..5392274 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -88,6 +88,7 @@ ENDPROC(cpu_resume_turn_mmu_on) cpu_resume_after_mmu: str r5, [r2, r4, lsl #2] @ restore old mapping mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache + bl cpu_init @ restore the und/abt/irq banked regs ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 51e1583..37178a8 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -42,7 +42,6 @@ int pxa_pm_enter(suspend_state_t state) /* *** go zzz *** */ pxa_cpu_pm_fns->enter(state); - cpu_init(); if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index c4661aa..d35885c 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -77,8 +77,6 @@ static int sa11x0_pm_enter(suspend_state_t state) /* go zzz */ sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); - cpu_init(); - /* * Ensure not to come back here if it wasn't intended */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 5c0a440..3828191 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -300,10 +300,6 @@ static int s3c_pm_enter(suspend_state_t state) s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET); - /* restore the cpu state using the kernel's cpu init code. */ - - cpu_init(); - /* restore the system state */ s3c_pm_restore_core(); -- cgit v0.10.2 From 34c79de6b2ea5bc5734d970851fb966b49d55a17 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 Jun 2011 16:26:29 +0100 Subject: ARM: pm: sa1100: move cpu_suspend into C code We don't need a veneer for cpu_suspend, it can be called directly from C code now. Move it into sa11x0_pm_enter() along with the re-enabling of clock switching. Signed-off-by: Russell King diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index d35885c..259ed3b 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -32,7 +32,7 @@ #include #include -extern void sa1100_cpu_suspend(long); +extern void sa1100_finish_suspend(unsigned long); #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] @@ -75,7 +75,7 @@ static int sa11x0_pm_enter(suspend_state_t state) PSPR = virt_to_phys(cpu_resume); /* go zzz */ - sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, 0, sa1100_finish_suspend); /* * Ensure not to come back here if it wasn't intended diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index f3fe397..e822331 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -22,20 +22,13 @@ .text /* - * sa1100_cpu_suspend() + * sa1100_finish_suspend() * * Causes sa11x0 to enter sleep state * */ -ENTRY(sa1100_cpu_suspend) - stmfd sp!, {r4 - r12, lr} @ save registers on stack - mov r1, r0 - adr r3, BSYM(sa1100_finish_suspend) - bl cpu_suspend - ldmfd sp!, {r4 - r12, pc} @ return to caller - -sa1100_finish_suspend: +ENTRY(sa1100_finish_suspend) @ disable clock switching mcr p15, 0, r1, c15, c2, 2 -- cgit v0.10.2 From c4ac82c07dd3e4fb5d65a52ffa94e302f80b609d Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 16:03:19 +0100 Subject: ARM: pm: plat-s3c24xx: cleanup s3c_cpu_save s3c_cpu_save does not need to save any registers with the new cpu_suspend calling convention. Remove these redundant instructions. Tested-by: Kukjin Kim Signed-off-by: Russell King diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index f822e62..6ada459 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -48,10 +48,8 @@ */ ENTRY(s3c_cpu_save) - stmfd sp!, { r4 - r12, lr } adr r3, BSYM(s3c24xx_finish_suspend) - bl cpu_suspend - ldmfd sp!, { r4 - r12, pc } + b cpu_suspend s3c24xx_finish_suspend: @@ jump to final code to send system to sleep -- cgit v0.10.2 From 3d32ead3f16f054fa7f4a85a34eb12c36fd76269 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 16:10:16 +0100 Subject: ARM: pm: mach-s5pv210: cleanup s3c_cpu_save s3c_cpu_save does not need to save any registers with the new cpu_suspend calling convention. Remove these redundant instructions. Signed-off-by: Russell King diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index 1182fc8..28dfeff 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -39,11 +39,8 @@ */ ENTRY(s3c_cpu_save) - - stmfd sp!, { r3 - r12, lr } adr r3, BSYM(s5pv210_finish_suspend) - bl cpu_suspend - ldmfd sp!, { r3 - r12, pc } + b cpu_suspend s5pv210_finish_suspend: ldr r0, =pm_cpu_sleep -- cgit v0.10.2 From 769783a9300d47236766345cc98ce963122c2e4f Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 16:12:27 +0100 Subject: ARM: pm: mach-exynos4: cleanup s3c_cpu_save s3c_cpu_save does not need to save any registers with the new cpu_suspend calling convention. Remove these redundant instructions. Signed-off-by: Russell King diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S index d9a2287..b56a491 100644 --- a/arch/arm/mach-exynos4/sleep.S +++ b/arch/arm/mach-exynos4/sleep.S @@ -40,11 +40,8 @@ */ ENTRY(s3c_cpu_save) - - stmfd sp!, { r3 - r12, lr } adr r3, BSYM(exynos4_finish_suspend) - bl cpu_suspend - ldmfd sp!, { r3 - r12, pc } + b cpu_suspend exynos4_finish_suspend: ldr r0, =pm_cpu_sleep -- cgit v0.10.2 From 4d01446fea61a32b6755ae1e11314ffca744dcaa Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Jun 2011 16:33:30 +0100 Subject: ARM: pm: mach-s3c64xx: cleanup s3c_cpu_save s3c_cpu_save does not need to save any registers with the new cpu_suspend calling convention. Remove these redundant instructions. Acked-by: Frank Hofmann Signed-off-by: Russell King diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index dc4f582..2fd3433 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -35,10 +35,8 @@ */ ENTRY(s3c_cpu_save) - stmfd sp!, { r4 - r12, lr } adr r3, BSYM(s3c64xx_finish_suspend) - bl cpu_suspend - ldmfd sp!, { r4 - r12, pc } + b cpu_suspend s3c64xx_finish_suspend: @@ call final suspend code -- cgit v0.10.2 From e7089da9567fa8da37e35e1f81a5e3579d0d582d Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 Jun 2011 19:29:26 +0100 Subject: ARM: pm: samsung: move cpu_suspend into C code Move the call to cpu_suspend into C code, and noticing that all the s3c_cpu_save implementations are now identical, we can move this into the common samsung code. Signed-off-by: Russell King diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 8755ca8..5c01c60 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -280,7 +280,7 @@ static struct sleep_save exynos4_l2cc_save[] = { SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), }; -void exynos4_cpu_suspend(void) +void exynos4_cpu_suspend(unsigned long arg) { unsigned long tmp; unsigned long mask = 0xFFFFFFFF; diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S index b56a491..0984078 100644 --- a/arch/arm/mach-exynos4/sleep.S +++ b/arch/arm/mach-exynos4/sleep.S @@ -33,24 +33,6 @@ .text /* - * s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - adr r3, BSYM(exynos4_finish_suspend) - b cpu_suspend - -exynos4_finish_suspend: - ldr r0, =pm_cpu_sleep - ldr r0, [ r0 ] - mov pc, r0 - - .ltorg - - /* * sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 752b13a..fecd854 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -37,7 +37,7 @@ extern void s3c2412_sleep_enter(void); -static void s3c2412_cpu_suspend(void) +static void s3c2412_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 41db2b2..268fda7 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -24,7 +24,7 @@ extern void s3c2412_sleep_enter(void); -static void s3c2416_cpu_suspend(void) +static void s3c2416_cpu_suspend(unsigned long arg) { flush_cache_all(); diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index bc1c470..7cc1879 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -112,7 +112,7 @@ void s3c_pm_save_core(void) * this. */ -static void s3c64xx_cpu_suspend(void) +static void s3c64xx_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index 2fd3433..34313f9 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -25,24 +25,6 @@ .text - /* s3c_cpu_save - * - * Save enough processor state to allow the restart of the pm.c - * code after resume. - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - adr r3, BSYM(s3c64xx_finish_suspend) - b cpu_suspend - -s3c64xx_finish_suspend: - @@ call final suspend code - ldr r0, =pm_cpu_sleep - ldr pc, [r0] - /* Sleep magic, the word before the resume entry point so that the * bootloader can check for a resumeable image. */ diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 24febae..309e388 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = { SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(void) +void s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index 28dfeff..e3452cc 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -32,23 +32,6 @@ .text - /* s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - adr r3, BSYM(s5pv210_finish_suspend) - b cpu_suspend - -s5pv210_finish_suspend: - ldr r0, =pm_cpu_sleep - ldr r0, [ r0 ] - mov pc, r0 - - .ltorg - /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 6ada459..c566125 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -41,25 +41,6 @@ .text - /* s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - adr r3, BSYM(s3c24xx_finish_suspend) - b cpu_suspend - -s3c24xx_finish_suspend: - @@ jump to final code to send system to sleep - ldr r0, =pm_cpu_sleep - @@ldr pc, [ r0 ] - ldr r0, [ r0 ] - mov pc, r0 - - .ltorg - /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 7fb6f6b..0a5b7fa 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -42,7 +42,7 @@ extern unsigned long s3c_irqwake_eintallow; /* per-cpu sleep functions */ extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); +extern void (*pm_cpu_sleep)(unsigned long); /* Flags for PM Control */ @@ -52,10 +52,9 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ /* from sleep.S */ -extern int s3c_cpu_save(unsigned long *saveblk, long); extern void s3c_cpu_resume(void); -extern void s3c2410_cpu_suspend(void); +extern void s3c2410_cpu_suspend(unsigned long); /* sleep save info */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 3828191..3a6d076 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -231,7 +231,7 @@ static void __maybe_unused s3c_pm_show_resume_irqs(int start, void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); +void (*pm_cpu_sleep)(unsigned long); #define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) @@ -294,11 +294,11 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_arch_stop_clocks(); - /* s3c_cpu_save will also act as our return point from when + /* this will also act as our return point from when * we resume as it saves its own register state and restores it * during the resume. */ - s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, 0, pm_cpu_sleep); /* restore the system state */ -- cgit v0.10.2 From 372c0ac8aca7655b6a8920b10bf9563402ac19d8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 Jun 2011 19:34:34 +0100 Subject: ARM: pm: samsung: no need to call flush_cache_all() The core suspend code calls flush_cache_all() immediately prior to calling the suspend finisher function, so remove these needless calls from the finisher functions. Signed-off-by: Russell King diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index fecd854..9a1fb89 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -41,8 +41,6 @@ static void s3c2412_cpu_suspend(unsigned long arg) { unsigned long tmp; - flush_cache_all(); - /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 268fda7..9e67a2a 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -26,8 +26,6 @@ extern void s3c2412_sleep_enter(void); static void s3c2416_cpu_suspend(unsigned long arg) { - flush_cache_all(); - /* enable wakeup sources regardless of battery state */ __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG); -- cgit v0.10.2 From a9503d2185bbc28e498c435a07f24986c48b5cbe Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 21 Jun 2011 16:29:30 +0100 Subject: ARM: pm: pxa: move cpu_suspend into C code We don't need a veneer for cpu_suspend, it can be called directly from C code now. Move it into the PXA CPU suspend functions, along with the accumulator register saving/restoring. Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index f15afe0..a566720 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns { extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; /* sleep.S */ -extern void pxa25x_cpu_suspend(unsigned int, long); -extern void pxa27x_cpu_suspend(unsigned int, long); +extern void pxa25x_finish_suspend(unsigned long); +extern void pxa27x_finish_suspend(unsigned long); extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index fed363c..fd7725c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -244,7 +244,8 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: - pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, PWRMODE_SLEEP, + pxa25x_finish_suspend); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 2fecbec..824379d 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -284,6 +284,11 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save) void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); +#ifndef CONFIG_IWMMXT + u64 acc0; + + asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); +#endif /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -299,7 +304,11 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, pwrmode, + pxa27x_finish_suspend); +#ifndef CONFIG_IWMMXT + asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); +#endif break; } } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 8521d7d..220fd8c 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -141,8 +141,13 @@ static void pxa3xx_cpu_pm_suspend(void) { volatile unsigned long *p = (volatile void *)0xc0000000; unsigned long saved_data = *p; +#ifndef CONFIG_IWMMXT + u64 acc0; - extern void pxa3xx_cpu_suspend(long); + asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); +#endif + + extern void pxa3xx_finish_suspend(unsigned long); /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); @@ -162,11 +167,15 @@ static void pxa3xx_cpu_pm_suspend(void) /* overwrite with the resume address */ *p = virt_to_phys(cpu_resume); - pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, 0, pxa3xx_finish_suspend); *p = saved_data; AD3ER = 0; + +#ifndef CONFIG_IWMMXT + asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); +#endif } static void pxa3xx_cpu_pm_enter(suspend_state_t state) diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 3a67887..1e544be 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -24,22 +24,9 @@ #ifdef CONFIG_PXA3xx /* - * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4) - * - * r0 = v:p offset + * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4) */ -ENTRY(pxa3xx_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r1, r0 - adr r3, BSYM(pxa3xx_finish_suspend) - bl cpu_suspend - b pxa_cpu_resume - -pxa3xx_finish_suspend: +ENTRY(pxa3xx_finish_suspend) mov r0, #0x06 @ S2D3C4 mode mcr p14, 0, r0, c7, c0, 0 @ enter sleep @@ -48,25 +35,13 @@ pxa3xx_finish_suspend: #ifdef CONFIG_PXA27x /* - * pxa27x_cpu_suspend() + * pxa27x_finish_suspend() * * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state - * r1 = v:p offset */ -ENTRY(pxa27x_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r2, r0 @ save sleep mode - adr r3, BSYM(pxa27x_finish_suspend) - bl cpu_suspend - b pxa_cpu_resume - -pxa27x_finish_suspend: +ENTRY(pxa27x_finish_suspend) @ Put the processor to sleep @ (also workaround for sighting 28071) @@ -103,22 +78,14 @@ pxa27x_finish_suspend: #ifdef CONFIG_PXA25x /* - * pxa25x_cpu_suspend() + * pxa25x_finish_suspend() * * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state - * r1 = v:p offset */ -ENTRY(pxa25x_cpu_suspend) - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r2, r0 @ save sleep mode - adr r3, BSYM(pxa25x_finish_suspend) - bl cpu_suspend - b pxa_cpu_resume - -pxa25x_finish_suspend: +ENTRY(pxa25x_finish_suspend) @ prepare value for sleep mode mov r1, r0 @ sleep mode @@ -202,16 +169,3 @@ pxa_cpu_do_suspend: mcr p14, 0, r1, c7, c0, 0 @ PWRMODE 20: b 20b @ loop waiting for sleep - -/* - * pxa_cpu_resume() - * - * entry point from bootloader into kernel during resume - */ - .align 5 -pxa_cpu_resume: - ldmfd sp!, {r2, r3} -#ifndef CONFIG_IWMMXT - mar acc0, r2, r3 -#endif - ldmfd sp!, {r4 - r12, pc} @ return to caller diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 00363c7..28eb410 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -676,7 +676,8 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { static void zeus_power_off(void) { local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, PWRMODE_DEEPSLEEP, + pxa27x_finish_suspend); } #else #define zeus_power_off NULL -- cgit v0.10.2 From 857c1b81f8dd2e2a97d859d7e53dd955e2ab55af Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 22 Jun 2011 12:44:32 +0100 Subject: ARM: pm: omap34xx: no need to save all registers in sleep34xx.S The ABI allows called functions to corrupt r0-r3 and ip (r12). So its pointless saving these registers in the suspend code - the calling function will expect them to be corrupted and so won't rely on their contents after resume. Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 63f1066..9551c7d 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -133,7 +133,7 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore) /* Function to call rom code to save secure ram context */ .align 3 ENTRY(save_secure_ram_context) - stmfd sp!, {r1-r12, lr} @ save registers on stack + stmfd sp!, {r4 - r11, lr} @ save registers on stack adr r3, api_params @ r3 points to parameters str r0, [r3,#0x4] @ r0 has sdram address ldr r12, high_mask @@ -152,7 +152,7 @@ ENTRY(save_secure_ram_context) nop nop nop - ldmfd sp!, {r1-r12, pc} + ldmfd sp!, {r4 - r11, pc} .align sram_phy_addr_mask: .word SRAM_BASE_P @@ -187,7 +187,7 @@ ENTRY(save_secure_ram_context_sz) */ .align 3 ENTRY(omap34xx_cpu_suspend) - stmfd sp!, {r0-r12, lr} @ save registers on stack + stmfd sp!, {r4 - r11, lr} @ save registers on stack /* * r0 contains CPU context save/restore pointer in sdram @@ -329,7 +329,7 @@ omap3_do_wfi: * == Exit point from non-OFF modes == * =================================== */ - ldmfd sp!, {r0-r12, pc} @ restore regs and return + ldmfd sp!, {r4 - r11, pc} @ restore regs and return /* @@ -572,7 +572,7 @@ usettbr0: * ============================== */ restoremmu_on: - ldmfd sp!, {r0-r12, pc} @ restore regs and return + ldmfd sp!, {r4 - r11, pc} @ restore regs and return /* -- cgit v0.10.2 From 2637ce30e145557bf89ebcf35b2d78e729e16e5a Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 22 Jun 2011 12:54:41 +0100 Subject: ARM: pm: omap34xx: remove misleading comment and use of r9 The code alludes to r9 being used to indicate what was lost over the suspend/resume transition. However, although r9 is set, it is never actually used. Also, the comments before the code (which refer to the value of r9) and the comments against the assignment of r9 contradict each other, so just remove them to avoid confusion. Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 9551c7d..12e9da2 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -381,18 +381,13 @@ restore_3630: restore: /* - * Check what was the reason for mpu reset and store the reason in r9: - * 0 - No context lost - * 1 - Only L1 and logic lost - * 2 - Only L2 lost - In this case, we wont be here - * 3 - Both L1 and L2 lost + * Read the pwstctrl register to check the reason for mpu reset. + * This tells us what was lost. */ ldr r1, pm_pwstctrl_mpu ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if target power state was OFF or RET - moveq r9, #0x3 @ MPU OFF => L1 and L2 lost - movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation bne logic_l1_restore ldr r0, l2dis_3630 -- cgit v0.10.2 From 076f2cc449188b7d3d4866730afa3ac7be3e6640 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 22 Jun 2011 15:42:54 +0100 Subject: ARM: pm: omap34xx: convert to generic suspend/resume support Convert omap34xx to use the generic CPU suspend/resume support, rather than implementing its own version. Tested on 3430 LDP. Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c155c9d..ae40177 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -40,8 +40,6 @@ #include #include -#include - #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" @@ -64,11 +62,6 @@ static inline bool is_suspending(void) } #endif -/* Scratchpad offsets */ -#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4 -#define OMAP343X_TABLE_VALUE_OFFSET 0xc0 -#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8 - /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -312,28 +305,9 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } -/* Function to restore the table entry that was modified for enabling MMU */ -static void restore_table_entry(void) +static void omap34xx_do_sram_idle(unsigned long save_state) { - void __iomem *scratchpad_address; - u32 previous_value, control_reg_value; - u32 *address; - - scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); - - /* Get address of entry that was modified */ - address = (u32 *)__raw_readl(scratchpad_address + - OMAP343X_TABLE_ADDRESS_OFFSET); - /* Get the previous value which needs to be restored */ - previous_value = __raw_readl(scratchpad_address + - OMAP343X_TABLE_VALUE_OFFSET); - address = __va(address); - *address = previous_value; - flush_tlb_all(); - control_reg_value = __raw_readl(scratchpad_address - + OMAP343X_CONTROL_REG_VALUE_OFFSET); - /* This will enable caches and prediction */ - set_cr(control_reg_value); + _omap_sram_idle(omap3_arm_context, save_state); } void omap_sram_idle(void) @@ -432,12 +406,15 @@ void omap_sram_idle(void) sdrc_pwr = sdrc_read_reg(SDRC_POWER); /* - * omap3_arm_context is the location where ARM registers - * get saved. The restore path then reads from this - * location and restores them back. + * omap3_arm_context is the location where some ARM context + * get saved. The rest is placed on the stack, and restored + * from there before resuming. */ - _omap_sram_idle(omap3_arm_context, save_state); - cpu_init(); + if (save_state == 1 || save_state == 3) + cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, save_state, + omap34xx_do_sram_idle); + else + omap34xx_do_sram_idle(save_state); /* Restore normal SDRC POWER settings */ if (omap_rev() >= OMAP3430_REV_ES3_0 && @@ -445,10 +422,6 @@ void omap_sram_idle(void) core_next_state == PWRDM_POWER_OFF) sdrc_write_reg(sdrc_pwr, SDRC_POWER); - /* Restore table entry modified during MMU restoration */ - if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF) - restore_table_entry(); - /* CORE */ if (core_next_state < PWRDM_POWER_ON) { core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 12e9da2..9a1349e 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -211,37 +211,6 @@ save_context_wfi: mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register stmia r8!, {r4-r5} @ Push parameters for restore call - /* Check what that target sleep state is from r1 */ - cmp r1, #0x2 @ Only L2 lost, no need to save context - beq clean_caches - -l1_logic_lost: - mov r4, sp @ Store sp - mrs r5, spsr @ Store spsr - mov r6, lr @ Store lr - stmia r8!, {r4-r6} - - mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register - mrc p15, 0, r5, c2, c0, 0 @ TTBR0 - mrc p15, 0, r6, c2, c0, 1 @ TTBR1 - mrc p15, 0, r7, c2, c0, 2 @ TTBCR - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mrc p15, 0, r5, c10, c2, 0 @ PRRR - mrc p15, 0, r6, c10, c2, 1 @ NMRR - stmia r8!,{r4-r6} - - mrc p15, 0, r4, c13, c0, 1 @ Context ID - mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - mrs r7, cpsr @ Store current cpsr - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c1, c0, 0 @ save control register - stmia r8!, {r4} - -clean_caches: /* * jump out to kernel flush routine * - reuse that code is better @@ -466,109 +435,11 @@ logic_l1_restore: orr r1, r1, #2 @ re-enable L2 cache mcr p15, 0, r1, c1, c0, 1 skipl2reen: - mov r1, #0 - /* - * Invalidate all instruction caches to PoU - * and flush branch target cache - */ - mcr p15, 0, r1, c7, c5, 0 - ldr r4, scratchpad_base - ldr r3, [r4,#0xBC] - adds r3, r3, #16 - - ldmia r3!, {r4-r6} - mov sp, r4 @ Restore sp - msr spsr_cxsf, r5 @ Restore spsr - mov lr, r6 @ Restore lr - - ldmia r3!, {r4-r7} - mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register - mcr p15, 0, r5, c2, c0, 0 @ TTBR0 - mcr p15, 0, r6, c2, c0, 1 @ TTBR1 - mcr p15, 0, r7, c2, c0, 2 @ TTBCR - - ldmia r3!,{r4-r6} - mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mcr p15, 0, r5, c10, c2, 0 @ PRRR - mcr p15, 0, r6, c10, c2, 1 @ NMRR - - - ldmia r3!,{r4-r7} - mcr p15, 0, r4, c13, c0, 1 @ Context ID - mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - msr cpsr, r7 @ store cpsr - - /* Enabling MMU here */ - mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl - /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ - and r7, #0x7 - cmp r7, #0x0 - beq usettbr0 -ttbr_error: - /* - * More work needs to be done to support N[0:2] value other than 0 - * So looping here so that the error can be detected - */ - b ttbr_error -usettbr0: - mrc p15, 0, r2, c2, c0, 0 - ldr r5, ttbrbit_mask - and r2, r5 - mov r4, pc - ldr r5, table_index_mask - and r4, r5 @ r4 = 31 to 20 bits of pc - /* Extract the value to be written to table entry */ - ldr r1, table_entry - /* r1 has the value to be written to table entry*/ - add r1, r1, r4 - /* Getting the address of table entry to modify */ - lsr r4, #18 - /* r2 has the location which needs to be modified */ - add r2, r4 - /* Storing previous entry of location being modified */ - ldr r5, scratchpad_base - ldr r4, [r2] - str r4, [r5, #0xC0] - /* Modify the table entry */ - str r1, [r2] - /* - * Storing address of entry being modified - * - will be restored after enabling MMU - */ - ldr r5, scratchpad_base - str r2, [r5, #0xC4] - - mov r0, #0 - mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer - mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array - mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB - mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB - /* - * Restore control register. This enables the MMU. - * The caches and prediction are not enabled here, they - * will be enabled after restoring the MMU table entry. - */ - ldmia r3!, {r4} - /* Store previous value of control register in scratchpad */ - str r4, [r5, #0xC8] - ldr r2, cache_pred_disable_mask - and r4, r2 - mcr p15, 0, r4, c1, c0, 0 - dsb - isb - ldr r0, =restoremmu_on - bx r0 - -/* - * ============================== - * == Exit point from OFF mode == - * ============================== - */ -restoremmu_on: - ldmfd sp!, {r4 - r11, pc} @ restore regs and return + /* Now branch to the common CPU resume function */ + b cpu_resume + .ltorg /* * Internal functions @@ -719,14 +590,6 @@ sram_base: .word SRAM_BASE_P + 0x8000 sdrc_power: .word SDRC_POWER_V -ttbrbit_mask: - .word 0xFFFFC000 -table_index_mask: - .word 0xFFF00000 -table_entry: - .word 0x00000C02 -cache_pred_disable_mask: - .word 0xFFFFE7FB control_stat: .word CONTROL_STAT control_mem_rta: -- cgit v0.10.2 From 3535ed3fa7a87244410696880000e03bc224315d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 16 Jun 2011 19:31:19 +0000 Subject: gx1fb: Fix section mismatch warnings Fix a chain of section mismatches in geode driver, beginning with: WARNING: drivers/video/geode/gx1fb.o(.data+0x70): Section mismatch in reference from the variable gx1fb_driver to the function .init.text:gx1fb_probe() The variable gx1fb_driver references the function __init gx1fb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Making the changes that Paul pointed out resulted in a few more changes being needed, so they are all included here. Signed-off-by: Randy Dunlap Signed-off-by: Paul Mundt diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c index c6b554f..5a5d092 100644 --- a/drivers/video/geode/gx1fb_core.c +++ b/drivers/video/geode/gx1fb_core.c @@ -29,7 +29,7 @@ static int crt_option = 1; static char panel_option[32] = ""; /* Modes relevant to the GX1 (taken from modedb.c) */ -static const struct fb_videomode __initdata gx1_modedb[] = { +static const struct fb_videomode __devinitdata gx1_modedb[] = { /* 640x480-60 VESA */ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, @@ -195,7 +195,7 @@ static int gx1fb_blank(int blank_mode, struct fb_info *info) return par->vid_ops->blank_display(info, blank_mode); } -static int __init gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *dev) +static int __devinit gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *dev) { struct geodefb_par *par = info->par; unsigned gx_base; @@ -268,7 +268,7 @@ static struct fb_ops gx1fb_ops = { .fb_imageblit = cfb_imageblit, }; -static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) +static struct fb_info * __devinit gx1fb_init_fbinfo(struct device *dev) { struct geodefb_par *par; struct fb_info *info; @@ -318,7 +318,7 @@ static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) return info; } -static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int __devinit gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct geodefb_par *par; struct fb_info *info; @@ -382,7 +382,7 @@ static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id * return ret; } -static void gx1fb_remove(struct pci_dev *pdev) +static void __devexit gx1fb_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); struct geodefb_par *par = info->par; @@ -441,7 +441,7 @@ static struct pci_driver gx1fb_driver = { .name = "gx1fb", .id_table = gx1fb_id_table, .probe = gx1fb_probe, - .remove = gx1fb_remove, + .remove = __devexit_p(gx1fb_remove), }; static int __init gx1fb_init(void) @@ -456,7 +456,7 @@ static int __init gx1fb_init(void) return pci_register_driver(&gx1fb_driver); } -static void __exit gx1fb_cleanup(void) +static void __devexit gx1fb_cleanup(void) { pci_unregister_driver(&gx1fb_driver); } -- cgit v0.10.2 From 9845afc8fa32de145d56c8e69b7900e10371255d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 16 Jun 2011 19:32:40 +0000 Subject: sm501fb: fix section mismatch warning Fix section mismatch warning in sm501fb: WARNING: drivers/video/sm501fb.o(.text+0x21d6): Section mismatch in reference from the function sm501fb_init_fb() to the variable .devinit.data:sm501_default_mode The function sm501fb_init_fb() references the variable __devinitdata sm501_default_mode. This is often because sm501fb_init_fb lacks a __devinitdata annotation or the annotation of sm501_default_mode is wrong. Signed-off-by: Randy Dunlap Signed-off-by: Paul Mundt diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 87f0be1..6294dca 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -1664,7 +1664,7 @@ static void sm501fb_stop(struct sm501fb_info *info) resource_size(info->regs_res)); } -static int sm501fb_init_fb(struct fb_info *fb, +static int __devinit sm501fb_init_fb(struct fb_info *fb, enum sm501_controller head, const char *fbname) { -- cgit v0.10.2 From 291600193e5c0c3f0a9af1f23a8076dd7417c02a Mon Sep 17 00:00:00 2001 From: Pavel Shved Date: Fri, 17 Jun 2011 16:25:12 +0000 Subject: hecubafb: add module_put on error path in hecubafb_probe() In hecubafb_probe(), after a successful try_module_get, vzalloc may fail and make the hecubafb_probe return, but the module is not put on this error path. This patch adds an exit point that calls module_put in such situation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved Signed-off-by: Paul Mundt diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c index fbef15f..614251a 100644 --- a/drivers/video/hecubafb.c +++ b/drivers/video/hecubafb.c @@ -233,7 +233,7 @@ static int __devinit hecubafb_probe(struct platform_device *dev) videomemory = vzalloc(videomemorysize); if (!videomemory) - return retval; + goto err_videomem_alloc; info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev); if (!info) @@ -275,6 +275,7 @@ err_fbreg: framebuffer_release(info); err_fballoc: vfree(videomemory); +err_videomem_alloc: module_put(board->owner); return retval; } -- cgit v0.10.2 From 9377c51752970c305fae29ac634501fde44378cb Mon Sep 17 00:00:00 2001 From: William Katsak Date: Thu, 23 Jun 2011 13:16:29 +0000 Subject: udlfb: Correct sub-optimal resolution selection. The situation in which the problem occurred was with a Plugable UGA-2K-A connected to a Samsung EX2220X display. The driver indicates that 1920x1080 is a valid mode (the first mode available, in fact), but proceeds to set the framebuffer size to 1600x1200. The patch corrects what seems to be a logic error, regarding unsetting the FB_MISC_1ST_DETAIL flag, if the first (top/best) mode is invalid. The existing code unset the flag if ANY mode was invalid. Signed-off-by: William Katsak Signed-off-by: Paul Mundt diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c index 52b0f3e..816a4fd 100644 --- a/drivers/video/udlfb.c +++ b/drivers/video/udlfb.c @@ -1233,8 +1233,12 @@ static int dlfb_setup_modes(struct dlfb_data *dev, if (dlfb_is_valid_mode(&info->monspecs.modedb[i], info)) fb_add_videomode(&info->monspecs.modedb[i], &info->modelist); - else /* if we've removed top/best mode */ - info->monspecs.misc &= ~FB_MISC_1ST_DETAIL; + else { + if (i == 0) + /* if we've removed top/best mode */ + info->monspecs.misc + &= ~FB_MISC_1ST_DETAIL; + } } default_vmode = fb_find_best_display(&info->monspecs, -- cgit v0.10.2 From 39785eb1d3e6c58cc8bf8f6990956a58037ecc75 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 23 Jun 2011 20:20:26 +0000 Subject: fsl-diu-fb: remove check for pixel clock ranges The Freescale DIU framebuffer driver defines two constants, MIN_PIX_CLK and MAX_PIX_CLK, that are supposed to represent the lower and upper limits of the pixel clock. These values, however, are true only for one platform clock rate (533MHz) and only for the MPC8610. So the actual range for the pixel clock is chip-specific, which means the current values are almost always wrong. The chance of an out-of-range pixel clock being used are also remote. Rather than try to detect an out-of-range clock in the DIU driver, we depend on the board-specific pixel clock function (e.g. p1022ds_set_pixel_clock) to clamp the pixel clock to a supported value. Signed-off-by: Timur Tabi Signed-off-by: Paul Mundt diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index bedf5be..0acc7d6 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -555,8 +555,6 @@ static void adjust_aoi_size_position(struct fb_var_screeninfo *var, static int fsl_diu_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { - unsigned long htotal, vtotal; - pr_debug("check_var xres: %d\n", var->xres); pr_debug("check_var yres: %d\n", var->yres); @@ -635,20 +633,6 @@ static int fsl_diu_check_var(struct fb_var_screeninfo *var, break; } - /* If the pixclock is below the minimum spec'd value then set to - * refresh rate for 60Hz since this is supported by most monitors. - * Refer to Documentation/fb/ for calculations. - */ - if ((var->pixclock < MIN_PIX_CLK) || (var->pixclock > MAX_PIX_CLK)) { - htotal = var->xres + var->right_margin + var->hsync_len + - var->left_margin; - vtotal = var->yres + var->lower_margin + var->vsync_len + - var->upper_margin; - var->pixclock = (vtotal * htotal * 6UL) / 100UL; - var->pixclock = KHZ2PICOS(var->pixclock); - pr_debug("pixclock set for 60Hz refresh = %u ps\n", - var->pixclock); - } var->height = -1; var->width = -1; diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h index 781d467..daa9952 100644 --- a/include/linux/fsl-diu-fb.h +++ b/include/linux/fsl-diu-fb.h @@ -24,12 +24,6 @@ * See mpc8610fb_set_par(), map_video_memory(), and unmap_video_memory() */ #define MEM_ALLOC_THRESHOLD (1024*768*4+32) -/* Minimum value that the pixel clock can be set to in pico seconds - * This is determined by platform clock/3 where the minimum platform - * clock is 533MHz. This gives 5629 pico seconds. - */ -#define MIN_PIX_CLK 5629 -#define MAX_PIX_CLK 96096 #include -- cgit v0.10.2 From 17e8c4e1ebf139743e3830439fa65fd906af4a43 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lo=C3=AFc=20Minier?= Date: Mon, 20 Jun 2011 20:44:17 +0000 Subject: fbdev: amba: Link fb device to its parent MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some pieces of userspace like debian-installer expect to find the fb0 driver name by readlink-ing /sys/class/graphics/fb0/device/driver but this was broken with amba-clcd as it sets up fb_info manually and missed the .device parent pointer. Signed-off-by: Loïc Minier Cc: Russell King Signed-off-by: Paul Mundt diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 5fc983c..cf03ad0 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -447,6 +447,8 @@ static int clcdfb_register(struct clcd_fb *fb) goto out; } + fb->fb.device = &fb->dev->dev; + fb->fb.fix.mmio_start = fb->dev->res.start; fb->fb.fix.mmio_len = resource_size(&fb->dev->res); -- cgit v0.10.2 From 6935d131dec9a85afe80512b5a12541592802e48 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 1 Mar 2011 07:58:47 +0000 Subject: sh: add to select the new configuration for USB EHCI/OHCI Because the USB EHCI/OHCI driver has new configuration for SH, the patch enables the EHCI and/or OHCI driver of the on-chip for some CPUs. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index f03338c..df89ba5 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -348,6 +348,7 @@ config CPU_SUBTYPE_SH7720 select SYS_SUPPORTS_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI + select USB_OHCI_SH help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -357,6 +358,7 @@ config CPU_SUBTYPE_SH7721 select CPU_HAS_DSP select SYS_SUPPORTS_CMT select USB_ARCH_HAS_OHCI + select USB_OHCI_SH help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -440,6 +442,7 @@ config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A select USB_ARCH_HAS_OHCI + select USB_OHCI_SH help Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. @@ -467,7 +470,9 @@ config CPU_SUBTYPE_SH7786 select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI + select USB_OHCI_SH select USB_ARCH_HAS_EHCI + select USB_EHCI_SH config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" -- cgit v0.10.2 From 14c79bbed7e06135bcbccb2b92c19df7115b4502 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 23 Jun 2011 17:16:14 -0700 Subject: ARM: pm: omap34xx: remove get_*_restore_pointer functions, directly use entry points Upon return from off-mode, the ROM code jumps to a restore function saved in the scratchpad. Based on SoC revision or errata, this restore entry point is different. Current code uses some helper functions in sleep34xx.S (get_*_restore_pointer) to get the restore function entry point. When returning from off-mode, this code is executed from SDRAM, so there's no reason to use these helper functions when using the SDRAM entry points directly would work just fine. This patch uses ENTRY/ENDPROC to create "real" entry points for these functions, and uses those values directly when writing the scratchpad. Tested all three entry points - restore_es3: 3430/n900 - restore_3630: 3630/Zoom3 - restore: 3530/Overo Suggested-by: Russell King Acked-by: Jean Pihet Acked-by: Santosh Shilimkar Signed-off-by: Kevin Hilman Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index da53ba3..aab884f 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -286,14 +286,15 @@ void omap3_save_scratchpad_contents(void) scratchpad_contents.boot_config_ptr = 0x0; if (cpu_is_omap3630()) scratchpad_contents.public_restore_ptr = - virt_to_phys(get_omap3630_restore_pointer()); + virt_to_phys(omap3_restore_3630); else if (omap_rev() != OMAP3430_REV_ES3_0 && omap_rev() != OMAP3430_REV_ES3_1) scratchpad_contents.public_restore_ptr = - virt_to_phys(get_restore_pointer()); + virt_to_phys(omap3_restore); else scratchpad_contents.public_restore_ptr = - virt_to_phys(get_es3_restore_pointer()); + virt_to_phys(omap3_restore_es3); + if (omap_type() == OMAP2_DEVICE_TYPE_GP) scratchpad_contents.secure_ram_restore_ptr = 0x0; else diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a016c8b..d4ef75d 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -386,9 +386,9 @@ extern void omap4_ctrl_pad_writel(u32 val, u16 offset); extern void omap3_save_scratchpad_contents(void); extern void omap3_clear_scratchpad_contents(void); -extern u32 *get_restore_pointer(void); -extern u32 *get_es3_restore_pointer(void); -extern u32 *get_omap3630_restore_pointer(void); +extern void omap3_restore(void); +extern void omap3_restore_es3(void); +extern void omap3_restore_3630(void); extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 9a1349e..d18f52e 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -74,46 +74,6 @@ * API functions */ -/* - * The "get_*restore_pointer" functions are used to provide a - * physical restore address where the ROM code jumps while waking - * up from MPU OFF/OSWR state. - * The restore pointer is stored into the scratchpad. - */ - - .text -/* Function call to get the restore pointer for resume from OFF */ -ENTRY(get_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_restore_pointer) - .align -ENTRY(get_restore_pointer_sz) - .word . - get_restore_pointer - - .text -/* Function call to get the restore pointer for 3630 resume from OFF */ -ENTRY(get_omap3630_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore_3630 - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_omap3630_restore_pointer) - .align -ENTRY(get_omap3630_restore_pointer_sz) - .word . - get_omap3630_restore_pointer - - .text -/* Function call to get the restore pointer for ES3 to resume from OFF */ -ENTRY(get_es3_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore_es3 - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_es3_restore_pointer) - .align -ENTRY(get_es3_restore_pointer_sz) - .word . - get_es3_restore_pointer - .text /* * L2 cache needs to be toggled for stable OFF mode functionality on 3630. @@ -316,12 +276,12 @@ omap3_do_wfi: * restore_3630: applies to 36xx * restore: common code for 3xxx */ -restore_es3: +ENTRY(omap3_restore_es3) ldr r5, pm_prepwstst_core_p ldr r4, [r5] and r4, r4, #0x3 cmp r4, #0x0 @ Check if previous power state of CORE is OFF - bne restore + bne omap3_restore adr r0, es3_sdrc_fix ldr r1, sram_base ldr r2, es3_sdrc_fix_sz @@ -333,22 +293,24 @@ copy_to_sram: bne copy_to_sram ldr r1, sram_base blx r1 - b restore + b omap3_restore +ENDPROC(omap3_restore_es3) -restore_3630: +ENTRY(omap3_restore_3630) ldr r1, pm_prepwstst_core_p ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if previous power state of CORE is OFF - bne restore + bne omap3_restore /* Disable RTA before giving control */ ldr r1, control_mem_rta mov r2, #OMAP36XX_RTA_DISABLE str r2, [r1] +ENDPROC(omap3_restore_3630) /* Fall through to common code for the remaining logic */ -restore: +ENTRY(omap3_restore) /* * Read the pwstctrl register to check the reason for mpu reset. * This tells us what was lost. @@ -438,6 +400,7 @@ skipl2reen: /* Now branch to the common CPU resume function */ b cpu_resume +ENDPROC(omap3_restore) .ltorg -- cgit v0.10.2 From 2c74a0cefa463a7a483b07ba4d2ea8e4ec7b996c Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 22 Jun 2011 17:41:48 +0100 Subject: ARM: pm: hide 1st and 2nd arguments to cpu_suspend from platform code The first and second arguments shouldn't concern platform code, so hide them from each platforms caller. Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h new file mode 100644 index 0000000..8d5b446 --- /dev/null +++ b/arch/arm/include/asm/suspend.h @@ -0,0 +1,19 @@ +#ifndef __ASM_ARM_SUSPEND_H +#define __ASM_ARM_SUSPEND_H + +#include + +extern void cpu_resume(void); + +/* + * Hide the first two arguments to __cpu_suspend - these are an implementation + * detail which platform code shouldn't have to know about. + */ +static inline void cpu_suspend(unsigned long arg, void (*fn)(unsigned long)) +{ + extern void __cpu_suspend(int, long, unsigned long, + void (*)(unsigned long)); + __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn); +} + +#endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 50be605..832888d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -106,8 +106,6 @@ extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); extern void cpu_init(void); -extern void cpu_suspend(int, long, unsigned long, void (*)(unsigned long)); -extern void cpu_resume(void); void arm_machine_restart(char mode, const char *cmd); extern void (*arm_pm_restart)(char str, const char *cmd); diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 5392274..c156d0e 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -14,7 +14,7 @@ * r3 = suspend function * Note: does not return until system resumes */ -ENTRY(cpu_suspend) +ENTRY(__cpu_suspend) stmfd sp!, {r4 - r11, lr} #ifdef MULTI_CPU ldr r10, =processor @@ -56,7 +56,7 @@ ENTRY(cpu_suspend) bl __cpuc_flush_kern_all #endif ldmfd sp!, {r0, pc} @ call suspend fn -ENDPROC(cpu_suspend) +ENDPROC(__cpu_suspend) .ltorg /* diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ae40177..3e9a13e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -31,6 +31,8 @@ #include #include +#include + #include #include "clockdomain.h" #include "powerdomain.h" @@ -411,8 +413,7 @@ void omap_sram_idle(void) * from there before resuming. */ if (save_state == 1 || save_state == 3) - cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, save_state, - omap34xx_do_sram_idle); + cpu_suspend(save_state, omap34xx_do_sram_idle); else omap34xx_do_sram_idle(save_state); diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 65f24f0..5a5329b 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -33,6 +33,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index fd7725c..9c434d2 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include @@ -244,8 +245,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: - cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, PWRMODE_SLEEP, - pxa25x_finish_suspend); + cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 824379d..9d2400b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -304,8 +305,7 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, pwrmode, - pxa27x_finish_suspend); + cpu_suspend(pwrmode, pxa27x_finish_suspend); #ifndef CONFIG_IWMMXT asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); #endif diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 220fd8c..9fe947b 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -167,7 +168,7 @@ static void pxa3xx_cpu_pm_suspend(void) /* overwrite with the resume address */ *p = virt_to_phys(cpu_resume); - cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, 0, pxa3xx_finish_suspend); + cpu_suspend(0, pxa3xx_finish_suspend); *p = saved_data; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 28eb410..9b99cc1 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -31,6 +31,7 @@ #include #include +#include #include #include @@ -676,8 +677,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { static void zeus_power_off(void) { local_irq_disable(); - cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, PWRMODE_DEEPSLEEP, - pxa27x_finish_suspend); + cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend); } #else #define zeus_power_off NULL diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index 259ed3b..cf9a1e9 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -29,6 +29,7 @@ #include #include +#include #include #include @@ -75,7 +76,7 @@ static int sa11x0_pm_enter(suspend_state_t state) PSPR = virt_to_phys(cpu_resume); /* go zzz */ - cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, 0, sa1100_finish_suspend); + cpu_suspend(0, sa1100_finish_suspend); /* * Ensure not to come back here if it wasn't intended diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 3a6d076..69d6b04 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -298,7 +299,7 @@ static int s3c_pm_enter(suspend_state_t state) * we resume as it saves its own register state and restores it * during the resume. */ - cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, 0, pm_cpu_sleep); + cpu_suspend(0, pm_cpu_sleep); /* restore the system state */ -- cgit v0.10.2 From 0853f96f13e0b60f1c319bcd7f6a3a84d0d1e706 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 23 Jun 2011 14:24:09 +0100 Subject: ARM: pm: ensure our temporary page table entry is removed from the TLB Ensure that our temporary page table entry is flushed from the TLB before we resume normal operations. This ensures that userspace won't trip over the stale TLB entry. Tested-by: Kevin Hilman Acked-by: Jean Pihet Signed-off-by: Russell King diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h index 8d5b446..f8db9d0 100644 --- a/arch/arm/include/asm/suspend.h +++ b/arch/arm/include/asm/suspend.h @@ -2,6 +2,7 @@ #define __ASM_ARM_SUSPEND_H #include +#include extern void cpu_resume(void); @@ -14,6 +15,7 @@ static inline void cpu_suspend(unsigned long arg, void (*fn)(unsigned long)) extern void __cpu_suspend(int, long, unsigned long, void (*)(unsigned long)); __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn); + flush_tlb_all(); } #endif -- cgit v0.10.2 From 16866741bda5d16f3d30d1656ce941faf5dad34c Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 23 Jun 2011 23:54:40 +0200 Subject: ALSA: Remove unneeded version.h includes from sound/ In the sound/ directory there are two files (flagged by 'make versioncheck'); sound/pci/asihpi/asihpi.c and sound/soc/codecs/wm8991.c that include linux/version.h although they don't need it. This patch removes the unneeded includes. Signed-off-by: Jesper Juhl Signed-off-by: Takashi Iwai diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c index 2ca6f4f..e3569bd 100644 --- a/sound/pci/asihpi/asihpi.c +++ b/sound/pci/asihpi/asihpi.c @@ -27,7 +27,6 @@ #include "hpioctl.h" #include -#include #include #include #include diff --git a/sound/soc/codecs/wm8991.c b/sound/soc/codecs/wm8991.c index 3c2ee1b..6af23d0 100644 --- a/sound/soc/codecs/wm8991.c +++ b/sound/soc/codecs/wm8991.c @@ -13,7 +13,6 @@ #include #include -#include #include #include #include -- cgit v0.10.2 From 50bc03ab5c7529fdfe4e01621efca7d26439ea00 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Tue, 21 Jun 2011 15:01:53 +0200 Subject: HID: hid-multitouch: ensure slots are initialized In case a device does not provide the feature "Maximum Contact Count", or set it at 0, the maxcontacts field may be at 0 while calling input_mt_init_slots. This patch ensures that hid-multitouch will allways report ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space. This corrects a bug found with some Ilitek devices that has been integrated in 3.0-rc0. Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 0b2dcd0..3867656 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -271,6 +271,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, } return 1; case HID_DG_CONTACTID: + if (!td->maxcontacts) + td->maxcontacts = MT_DEFAULT_MAXCONTACT; input_mt_init_slots(hi->input, td->maxcontacts); td->last_slot_field = usage->hid; td->last_field_index = field->index; @@ -547,9 +549,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) if (ret) goto fail; - if (!td->maxcontacts) - td->maxcontacts = MT_DEFAULT_MAXCONTACT; - td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot), GFP_KERNEL); if (!td->slots) { -- cgit v0.10.2 From 85a600825b425d52e466c6093dcdfeba85eb0044 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Tue, 21 Jun 2011 15:01:54 +0200 Subject: HID: hid-multitouch: correct VID for Stantum panels while merging hid-stantum into hid-multitouch, I did not correctly copy/paste the VIDs for those devices. This patch fixes it. Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 3867656..467b518 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -706,10 +706,10 @@ static const struct hid_device_id mt_devices[] = { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP)}, { .driver_data = MT_CLS_CONFIDENCE, - HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_MTP_STM)}, { .driver_data = MT_CLS_CONFIDENCE, - HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, USB_DEVICE_ID_MTP_SITRONIX)}, /* Touch International panels */ -- cgit v0.10.2 From c3ead6de4f6bd1c08a81f84e629e3dbf4a9078f0 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Tue, 21 Jun 2011 15:01:55 +0200 Subject: HID: hid-multitouch: add support for a new Lumio dual-touch panel Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index f7440e8..6f3289a 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1423,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH_DUAL) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index aecb5a4..a756ee6 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -449,6 +449,7 @@ #define USB_VENDOR_ID_LUMIO 0x202e #define USB_DEVICE_ID_CRYSTALTOUCH 0x0006 +#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007 #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 467b518..62cac4d 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -676,6 +676,9 @@ static const struct hid_device_id mt_devices[] = { { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) }, + { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, + HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, + USB_DEVICE_ID_CRYSTALTOUCH_DUAL) }, /* MosArt panels */ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, -- cgit v0.10.2 From 46e4edbf7ea9cf26665eb9f90c0fc7688d1a51ed Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 23 Jun 2011 23:59:32 +0200 Subject: Remove unneeded version.h includes from fs/ It was pointed out by 'make versioncheck' that some includes of linux/version.h were not needed in fs/ (fs/btrfs/ctree.h and fs/omfs/file.c). This patch removes them. Signed-off-by: Jesper Juhl Acked-by: Bob Copeland Signed-off-by: Linus Torvalds diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 3006287..f30ac05 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -19,7 +19,6 @@ #ifndef __BTRFS_CTREE__ #define __BTRFS_CTREE__ -#include #include #include #include diff --git a/fs/omfs/file.c b/fs/omfs/file.c index d738a7e..2c6d952 100644 --- a/fs/omfs/file.c +++ b/fs/omfs/file.c @@ -4,7 +4,6 @@ * Released under GPL v2. */ -#include #include #include #include -- cgit v0.10.2 From e4fb0edb7c03e5ec19b6f732f1dfbe911212dbde Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 20 Jun 2011 14:33:16 -0400 Subject: cifs: free blkcipher in smbhash This is currently leaked in the rc == 0 case. Reported-by: J. Bruce Fields Signed-off-by: Jeff Layton Reviewed-by: Shirish Pargaonkar Signed-off-by: Steve French diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c index 1525d5e..1c5b770 100644 --- a/fs/cifs/smbencrypt.c +++ b/fs/cifs/smbencrypt.c @@ -90,12 +90,10 @@ smbhash(unsigned char *out, const unsigned char *in, unsigned char *key) sg_init_one(&sgout, out, 8); rc = crypto_blkcipher_encrypt(&desc, &sgout, &sgin, 8); - if (rc) { + if (rc) cERROR(1, "could not encrypt crypt key rc: %d\n", rc); - crypto_free_blkcipher(tfm_des); - goto smbhash_err; - } + crypto_free_blkcipher(tfm_des); smbhash_err: return rc; } -- cgit v0.10.2 From 1973f0faeb4a5f35597793c65d3c94d8fd386e10 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 24 Jun 2011 13:13:29 -0400 Subject: Btrfs: make sure to record the transid in new inodes When we create a new inode, we aren't filling in the field that records the transaction that last changed this inode. If we then go to fsync that inode, it will be skipped because the field isn't filled in. Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5813dec..87f1e0c 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4520,6 +4520,7 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, inode_tree_add(inode); trace_btrfs_inode_new(inode); + btrfs_set_inode_last_trans(trans, inode); return inode; fail: -- cgit v0.10.2 From 9b8e072a31180eb5cd6991d08524d9c4fa235ade Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 21 Jun 2011 07:18:26 -0400 Subject: cifs: mark CONFIG_CIFS_NFSD_EXPORT as BROKEN This does not work properly with CIFS as current servers do not enable support for the FILE_OPEN_BY_FILE_ID on SMB NTCreateX and not all NFS clients handle ESTALE. For now, it just plain doesn't work. Mark it BROKEN to discourage distros from enabling it. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig index 53ed1ad..f66cc16 100644 --- a/fs/cifs/Kconfig +++ b/fs/cifs/Kconfig @@ -156,6 +156,6 @@ config CIFS_ACL config CIFS_NFSD_EXPORT bool "Allow nfsd to export CIFS file system (EXPERIMENTAL)" - depends on CIFS && EXPERIMENTAL + depends on CIFS && EXPERIMENTAL && BROKEN help Allows NFS server to export a CIFS mounted share (nfsd over cifs) -- cgit v0.10.2 From 1e4e82baee8c2a8d753cbf6aa1a77326b71e59f0 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 24 Jun 2011 19:52:13 +0200 Subject: r8169: fix wrong register use. Signed-off-by: Francois Romieu Cc: Realtek linux nic maintainers diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 05d8178..5990621 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -742,7 +742,7 @@ static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd) msleep(2); for (i = 0; i < 5; i++) { udelay(100); - if (!(RTL_R32(ERIDR) & ERIAR_FLAG)) + if (!(RTL_R32(ERIAR) & ERIAR_FLAG)) break; } -- cgit v0.10.2 From 77e569edf5a33cd94dac67c714cf736675b0e2da Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 21 Jun 2011 11:03:01 -0700 Subject: iwlagn: Fix a bug introduced by the HUGE command removal Since we don't have HUGE command any more, there is no point in adding 1 to the num of slots in the command queue. Doing so is buggy and might corrupt memory. Bug introduced by 4ce7cc2b09553a91d4aea014c39674685715173a iwlagn: support multiple TBs per command Cc: Johannes Berg Signed-off-by: Emmanuel Grumbach Signed-off-by: Wey-Yi Guy diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 686e176..157a642 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -535,12 +535,7 @@ out_free_arrays: void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) { - int actual_slots = slots_num; - - if (txq_id == priv->cmd_queue) - actual_slots++; - - memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * actual_slots); + memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * slots_num); txq->need_update = 0; -- cgit v0.10.2 From 5306c0807491e891125f4fb08b04340c91530f57 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Jun 2011 08:28:31 -0700 Subject: iwlagn: fix change_interface for P2P types When an interface changes type to a P2P type, iwlagn will erroneously set vif->type to the P2P type and not the reduced/split type. Fix this by keeping "newtype" in another variable for the assignment to vif->type. Cc: stable@kernel.org [2.6.38+] Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 213c80c..45cc51c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1763,6 +1763,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_rxon_context *tmp; + enum nl80211_iftype newviftype = newtype; u32 interface_modes; int err; @@ -1818,7 +1819,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* success */ iwl_teardown_interface(priv, vif, true); - vif->type = newtype; + vif->type = newviftype; vif->p2p = newp2p; err = iwl_setup_interface(priv, ctx); WARN_ON(err); -- cgit v0.10.2 From dd8544661947ad6d8d87b3c9d4333bfa1583d1bc Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 08:24:42 -0400 Subject: take bdi setup/destruction into cifs_mount/cifs_umount Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 2f0c586..5d3c4fa 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -116,18 +116,12 @@ cifs_read_super(struct super_block *sb, struct smb_vol *volume_info, spin_lock_init(&cifs_sb->tlink_tree_lock); cifs_sb->tlink_tree = RB_ROOT; - rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY); - if (rc) - return rc; - - cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages; - rc = cifs_mount(sb, cifs_sb, volume_info, devname); if (rc) { if (!silent) cERROR(1, "cifs_mount failed w/return code = %d", rc); - goto out_mount_failed; + return rc; } sb->s_magic = CIFS_MAGIC_NUMBER; @@ -171,9 +165,6 @@ out_no_root: iput(inode); cifs_umount(sb, cifs_sb); - -out_mount_failed: - bdi_destroy(&cifs_sb->bdi); return rc; } @@ -199,7 +190,6 @@ cifs_put_super(struct super_block *sb) } unload_nls(cifs_sb->local_nls); - bdi_destroy(&cifs_sb->bdi); kfree(cifs_sb); } diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 12cf72d..78fd755 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2983,6 +2983,13 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, struct tcon_link *tlink; #ifdef CONFIG_CIFS_DFS_UPCALL int referral_walks_count = 0; + + rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY); + if (rc) + return rc; + + cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages; + try_mount_again: /* cleanup activities if we're chasing a referral */ if (referral_walks_count) { @@ -3007,6 +3014,7 @@ try_mount_again: srvTcp = cifs_get_tcp_session(volume_info); if (IS_ERR(srvTcp)) { rc = PTR_ERR(srvTcp); + bdi_destroy(&cifs_sb->bdi); goto out; } @@ -3161,6 +3169,7 @@ mount_fail_check: cifs_put_smb_ses(pSesInfo); else cifs_put_tcp_session(srvTcp); + bdi_destroy(&cifs_sb->bdi); goto out; } @@ -3357,6 +3366,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) } spin_unlock(&cifs_sb->tlink_tree_lock); + bdi_destroy(&cifs_sb->bdi); return 0; } -- cgit v0.10.2 From 6d6861757dfadb7d6aec6bb34acd471210a755f9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 08:34:57 -0400 Subject: cifs: double free on mount failure if we get to out_super with ->s_root already set (e.g. with cifs_get_root() failure), we'll end up with cifs_put_super() called and ->mountdata freed twice. We'll also get cifs_sb freed twice and cifs_sb->local_nls dropped twice. The problem is, we can get to out_super both with and without ->s_root, which makes ->put_super() a bad place for such work. Switch to ->kill_sb(), have all that work done there after kill_anon_super(). Unlike ->put_super(), ->kill_sb() is called by deactivate_locked_super() whether we have ->s_root or not. Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 5d3c4fa..dc76c7b 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -184,11 +184,13 @@ cifs_put_super(struct super_block *sb) rc = cifs_umount(sb, cifs_sb); if (rc) cERROR(1, "cifs_umount failed with return code %d", rc); - if (cifs_sb->mountdata) { - kfree(cifs_sb->mountdata); - cifs_sb->mountdata = NULL; - } +} +static void cifs_kill_sb(struct super_block *sb) +{ + struct cifs_sb_info *cifs_sb = CIFS_SB(sb); + kill_anon_super(sb); + kfree(cifs_sb->mountdata); unload_nls(cifs_sb->local_nls); kfree(cifs_sb); } @@ -729,8 +731,8 @@ out_shared: goto out; out_super: - kfree(cifs_sb->mountdata); deactivate_locked_super(sb); + goto out; out_cifs_sb: unload_nls(cifs_sb->local_nls); @@ -827,7 +829,7 @@ struct file_system_type cifs_fs_type = { .owner = THIS_MODULE, .name = "cifs", .mount = cifs_do_mount, - .kill_sb = kill_anon_super, + .kill_sb = cifs_kill_sb, /* .fs_flags */ }; const struct inode_operations cifs_dir_inode_ops = { -- cgit v0.10.2 From ca171baaad1420a29cca98be5bdf5596cd70b294 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 08:49:12 -0400 Subject: cifs: don't leak nls on mount failure if cifs_sb allocation fails, we still need to drop nls we'd stashed into volume_info - the one we would've copied to cifs_sb if we could allocate the latter. Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index dc76c7b..bfab2bc 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -672,6 +672,7 @@ cifs_do_mount(struct file_system_type *fs_type, cifs_sb = kzalloc(sizeof(struct cifs_sb_info), GFP_KERNEL); if (cifs_sb == NULL) { root = ERR_PTR(-ENOMEM); + unload_nls(volume_info->local_nls); goto out; } -- cgit v0.10.2 From 2c6292ae4be00454882246d07f38cdf15a823c2a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:05:48 -0400 Subject: cifs: don't pass superblock to cifs_mount() To close sget() races we'll need to be able to set cifs_sb up before we get the superblock, so we'll want to be able to do cifs_mount() earlier. Fortunately, it's easy to do - setting ->s_maxbytes can be done in cifs_read_super(), ditto for ->s_time_gran and as for putting MS_POSIXACL into ->s_flags, we can mirror it in ->mnt_cifs_flags until cifs_read_super() is called. Kill unused 'devname' argument, while we are at it... Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h index ffb1459..7260e11 100644 --- a/fs/cifs/cifs_fs_sb.h +++ b/fs/cifs/cifs_fs_sb.h @@ -42,6 +42,7 @@ #define CIFS_MOUNT_MULTIUSER 0x20000 /* multiuser mount */ #define CIFS_MOUNT_STRICT_IO 0x40000 /* strict cache mode */ #define CIFS_MOUNT_RWPIDFORWARD 0x80000 /* use pid forwarding for rw */ +#define CIFS_MOUNT_POSIXACL 0x100000 /* mirror of MS_POSIXACL in mnt_cifs_flags */ struct cifs_sb_info { struct rb_root tlink_tree; diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index bfab2bc..8f7451f 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -116,7 +116,7 @@ cifs_read_super(struct super_block *sb, struct smb_vol *volume_info, spin_lock_init(&cifs_sb->tlink_tree_lock); cifs_sb->tlink_tree = RB_ROOT; - rc = cifs_mount(sb, cifs_sb, volume_info, devname); + rc = cifs_mount(cifs_sb, volume_info); if (rc) { if (!silent) @@ -124,6 +124,17 @@ cifs_read_super(struct super_block *sb, struct smb_vol *volume_info, return rc; } + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIXACL) + sb->s_flags |= MS_POSIXACL; + + if (cifs_sb_master_tcon(cifs_sb)->ses->capabilities & CAP_LARGE_FILES) + sb->s_maxbytes = MAX_LFS_FILESIZE; + else + sb->s_maxbytes = MAX_NON_LFS; + + /* BB FIXME fix time_gran to be larger for LANMAN sessions */ + sb->s_time_gran = 100; + sb->s_magic = CIFS_MAGIC_NUMBER; sb->s_op = &cifs_super_ops; sb->s_bdi = &cifs_sb->bdi; diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 953f844..5814fe5 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -157,8 +157,7 @@ extern int cifs_match_super(struct super_block *, void *); extern void cifs_cleanup_volume_info(struct smb_vol **pvolume_info); extern int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, const char *devname); -extern int cifs_mount(struct super_block *, struct cifs_sb_info *, - struct smb_vol *, const char *); +extern int cifs_mount(struct cifs_sb_info *, struct smb_vol *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); extern void cifs_dfs_release_automount_timer(void); void cifs_proc_init(void); @@ -218,7 +217,8 @@ extern int get_dfs_path(int xid, struct cifs_ses *pSesInfo, struct dfs_info3_param **preferrals, int remap); extern void reset_cifs_unix_caps(int xid, struct cifs_tcon *tcon, - struct super_block *sb, struct smb_vol *vol); + struct cifs_sb_info *cifs_sb, + struct smb_vol *vol); extern int CIFSSMBQFSInfo(const int xid, struct cifs_tcon *tcon, struct kstatfs *FSData); extern int SMBOldQFSInfo(const int xid, struct cifs_tcon *tcon, diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 78fd755..3011ac8 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2546,7 +2546,7 @@ ip_connect(struct TCP_Server_Info *server) } void reset_cifs_unix_caps(int xid, struct cifs_tcon *tcon, - struct super_block *sb, struct smb_vol *vol_info) + struct cifs_sb_info *cifs_sb, struct smb_vol *vol_info) { /* if we are reconnecting then should we check to see if * any requested capabilities changed locally e.g. via @@ -2600,22 +2600,23 @@ void reset_cifs_unix_caps(int xid, struct cifs_tcon *tcon, cap &= ~CIFS_UNIX_POSIX_ACL_CAP; else if (CIFS_UNIX_POSIX_ACL_CAP & cap) { cFYI(1, "negotiated posix acl support"); - if (sb) - sb->s_flags |= MS_POSIXACL; + if (cifs_sb) + cifs_sb->mnt_cifs_flags |= + CIFS_MOUNT_POSIXACL; } if (vol_info && vol_info->posix_paths == 0) cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP; else if (cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) { cFYI(1, "negotiate posix pathnames"); - if (sb) - CIFS_SB(sb)->mnt_cifs_flags |= + if (cifs_sb) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_POSIX_PATHS; } - if (sb && (CIFS_SB(sb)->rsize > 127 * 1024)) { + if (cifs_sb && (cifs_sb->rsize > 127 * 1024)) { if ((cap & CIFS_UNIX_LARGE_READ_CAP) == 0) { - CIFS_SB(sb)->rsize = 127 * 1024; + cifs_sb->rsize = 127 * 1024; cFYI(DBG2, "larger reads not supported by srv"); } } @@ -2971,8 +2972,7 @@ out: } int -cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, - struct smb_vol *volume_info, const char *devname) +cifs_mount(struct cifs_sb_info *cifs_sb, struct smb_vol *volume_info) { int rc = 0; int xid; @@ -3026,14 +3026,6 @@ try_mount_again: goto mount_fail_check; } - if (pSesInfo->capabilities & CAP_LARGE_FILES) - sb->s_maxbytes = MAX_LFS_FILESIZE; - else - sb->s_maxbytes = MAX_NON_LFS; - - /* BB FIXME fix time_gran to be larger for LANMAN sessions */ - sb->s_time_gran = 100; - /* search for existing tcon to this server share */ tcon = cifs_get_tcon(pSesInfo, volume_info); if (IS_ERR(tcon)) { @@ -3046,7 +3038,7 @@ try_mount_again: if (tcon->ses->capabilities & CAP_UNIX) { /* reset of caps checks mount to see if unix extensions disabled for just this mount */ - reset_cifs_unix_caps(xid, tcon, sb, volume_info); + reset_cifs_unix_caps(xid, tcon, cifs_sb, volume_info); if ((tcon->ses->server->tcpStatus == CifsNeedReconnect) && (le64_to_cpu(tcon->fsUnixInfo.Capability) & CIFS_UNIX_TRANSPORT_ENCRYPTION_MANDATORY_CAP)) { -- cgit v0.10.2 From d687ca380f1a8f3043f42efd2403cbe58c846e70 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:14:27 -0400 Subject: cifs: leak on mount if we share superblock cifs_sb and nls end up leaked... Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 8f7451f..4162ee4 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -701,6 +701,8 @@ cifs_do_mount(struct file_system_type *fs_type, if (sb->s_fs_info) { cFYI(1, "Use existing superblock"); + unload_nls(cifs_sb->local_nls); + kfree(cifs_sb); goto out_shared; } -- cgit v0.10.2 From 5d3bc605cafe3f367b1c43b673bf643245c81626 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:17:28 -0400 Subject: cifs: allocate mountdata earlier pull mountdata allocation up, so that it won't stand in the way when we lift cifs_mount() to location before sget(). Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 4162ee4..ec19161 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -687,6 +687,14 @@ cifs_do_mount(struct file_system_type *fs_type, goto out; } + cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL); + if (cifs_sb->mountdata == NULL) { + root = ERR_PTR(-ENOMEM); + unload_nls(volume_info->local_nls); + kfree(cifs_sb); + goto out; + } + cifs_setup_cifs_sb(volume_info, cifs_sb); mnt_data.vol = volume_info; @@ -701,22 +709,12 @@ cifs_do_mount(struct file_system_type *fs_type, if (sb->s_fs_info) { cFYI(1, "Use existing superblock"); + kfree(cifs_sb->mountdata); unload_nls(cifs_sb->local_nls); kfree(cifs_sb); goto out_shared; } - /* - * Copy mount params for use in submounts. Better to do - * the copy here and deal with the error before cleanup gets - * complicated post-mount. - */ - cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL); - if (cifs_sb->mountdata == NULL) { - root = ERR_PTR(-ENOMEM); - goto out_super; - } - sb->s_flags = flags; /* BB should we make this contingent on mount parm? */ sb->s_flags |= MS_NODIRATIME | MS_NOATIME; @@ -749,6 +747,7 @@ out_super: goto out; out_cifs_sb: + kfree(cifs_sb->mountdata); unload_nls(cifs_sb->local_nls); kfree(cifs_sb); -- cgit v0.10.2 From 2ced6f693581357b2a5bf8b031a702c624b12d0d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:20:04 -0400 Subject: cifs: initialize ->tlink_tree in cifs_setup_cifs_sb() no need to wait until cifs_read_super() and we need it done by the time cifs_mount() will be called. Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index ec19161..61c7aa8 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -113,9 +113,6 @@ cifs_read_super(struct super_block *sb, struct smb_vol *volume_info, cifs_sb = CIFS_SB(sb); - spin_lock_init(&cifs_sb->tlink_tree_lock); - cifs_sb->tlink_tree = RB_ROOT; - rc = cifs_mount(cifs_sb, volume_info); if (rc) { diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 3011ac8..9f09adf 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2663,6 +2663,9 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, { INIT_DELAYED_WORK(&cifs_sb->prune_tlinks, cifs_prune_tlinks); + spin_lock_init(&cifs_sb->tlink_tree_lock); + cifs_sb->tlink_tree = RB_ROOT; + if (pvolume_info->rsize > CIFSMaxBufSize) { cERROR(1, "rsize %d too large, using MaxBufSize", pvolume_info->rsize); -- cgit v0.10.2 From 2a9b99516c662d1713d58648e4a4c9aef72051bc Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:27:16 -0400 Subject: sanitize cifs_umount() prototype a) superblock argument is unused b) it always returns 0 Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 61c7aa8..2af14d4 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -172,7 +172,7 @@ out_no_root: if (inode) iput(inode); - cifs_umount(sb, cifs_sb); + cifs_umount(cifs_sb); return rc; } @@ -189,9 +189,7 @@ cifs_put_super(struct super_block *sb) return; } - rc = cifs_umount(sb, cifs_sb); - if (rc) - cERROR(1, "cifs_umount failed with return code %d", rc); + cifs_umount(cifs_sb); } static void cifs_kill_sb(struct super_block *sb) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 5814fe5..257f312 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -158,7 +158,7 @@ extern void cifs_cleanup_volume_info(struct smb_vol **pvolume_info); extern int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, const char *devname); extern int cifs_mount(struct cifs_sb_info *, struct smb_vol *); -extern int cifs_umount(struct super_block *, struct cifs_sb_info *); +extern void cifs_umount(struct cifs_sb_info *); extern void cifs_dfs_release_automount_timer(void); void cifs_proc_init(void); void cifs_proc_clean(void); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 9f09adf..b270222 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3339,8 +3339,8 @@ CIFSTCon(unsigned int xid, struct cifs_ses *ses, return rc; } -int -cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) +void +cifs_umount(struct cifs_sb_info *cifs_sb) { struct rb_root *root = &cifs_sb->tlink_tree; struct rb_node *node; @@ -3362,7 +3362,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) spin_unlock(&cifs_sb->tlink_tree_lock); bdi_destroy(&cifs_sb->bdi); - return 0; } int cifs_negotiate_protocol(unsigned int xid, struct cifs_ses *ses) -- cgit v0.10.2 From 97d1152acec0647b72f8c6ecc57da0d6fed574de Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:29:57 -0400 Subject: cifs: pull cifs_mount() call up ... to the point prior to sget(). Now we have cifs_sb set up early enough. Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 2af14d4..4004bc6 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -104,8 +104,7 @@ cifs_sb_deactive(struct super_block *sb) } static int -cifs_read_super(struct super_block *sb, struct smb_vol *volume_info, - const char *devname, int silent) +cifs_read_super(struct super_block *sb) { struct inode *inode; struct cifs_sb_info *cifs_sb; @@ -113,14 +112,6 @@ cifs_read_super(struct super_block *sb, struct smb_vol *volume_info, cifs_sb = CIFS_SB(sb); - rc = cifs_mount(cifs_sb, volume_info); - - if (rc) { - if (!silent) - cERROR(1, "cifs_mount failed w/return code = %d", rc); - return rc; - } - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIXACL) sb->s_flags |= MS_POSIXACL; @@ -692,6 +683,17 @@ cifs_do_mount(struct file_system_type *fs_type, cifs_setup_cifs_sb(volume_info, cifs_sb); + rc = cifs_mount(cifs_sb, volume_info); + if (rc) { + if (!(flags & MS_SILENT)) + cERROR(1, "cifs_mount failed w/return code = %d", rc); + root = ERR_PTR(rc); + unload_nls(volume_info->local_nls); + kfree(cifs_sb->mountdata); + kfree(cifs_sb); + goto out; + } + mnt_data.vol = volume_info; mnt_data.cifs_sb = cifs_sb; mnt_data.flags = flags; @@ -699,11 +701,13 @@ cifs_do_mount(struct file_system_type *fs_type, sb = sget(fs_type, cifs_match_super, set_anon_super, &mnt_data); if (IS_ERR(sb)) { root = ERR_CAST(sb); + cifs_umount(cifs_sb); goto out_cifs_sb; } if (sb->s_fs_info) { cFYI(1, "Use existing superblock"); + cifs_umount(cifs_sb); kfree(cifs_sb->mountdata); unload_nls(cifs_sb->local_nls); kfree(cifs_sb); @@ -715,8 +719,7 @@ cifs_do_mount(struct file_system_type *fs_type, sb->s_flags |= MS_NODIRATIME | MS_NOATIME; sb->s_fs_info = cifs_sb; - rc = cifs_read_super(sb, volume_info, dev_name, - flags & MS_SILENT ? 1 : 0); + rc = cifs_read_super(sb); if (rc) { root = ERR_PTR(rc); goto out_super; -- cgit v0.10.2 From 98ab494dd1d25388981114057cf9446250cc7dc7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:32:10 -0400 Subject: cifs: move cifs_umount() call into ->kill_sb() instead of calling it manually in case if cifs_read_super() fails to set ->s_root, just call it from ->kill_sb(). cifs_put_super() is gone now *and* we have cifs_sb shutdown and destruction done after the superblock is gone from ->s_instances. Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 4004bc6..15de456 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -163,30 +163,14 @@ out_no_root: if (inode) iput(inode); - cifs_umount(cifs_sb); return rc; } -static void -cifs_put_super(struct super_block *sb) -{ - int rc = 0; - struct cifs_sb_info *cifs_sb; - - cFYI(1, "In cifs_put_super"); - cifs_sb = CIFS_SB(sb); - if (cifs_sb == NULL) { - cFYI(1, "Empty cifs superblock info passed to unmount"); - return; - } - - cifs_umount(cifs_sb); -} - static void cifs_kill_sb(struct super_block *sb) { struct cifs_sb_info *cifs_sb = CIFS_SB(sb); kill_anon_super(sb); + cifs_umount(cifs_sb); kfree(cifs_sb->mountdata); unload_nls(cifs_sb->local_nls); kfree(cifs_sb); @@ -537,7 +521,6 @@ static int cifs_drop_inode(struct inode *inode) } static const struct super_operations cifs_super_ops = { - .put_super = cifs_put_super, .statfs = cifs_statfs, .alloc_inode = cifs_alloc_inode, .destroy_inode = cifs_destroy_inode, -- cgit v0.10.2 From d757d71bfc30669a500b72792067e8d1c5d401a5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:42:43 -0400 Subject: cifs: pull freeing mountdata/dropping nls/freeing cifs_sb into cifs_umount() all callers of cifs_umount() proceed to do the same thing; pull it into cifs_umount() itself. Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 15de456..46960b7 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -171,9 +171,6 @@ static void cifs_kill_sb(struct super_block *sb) struct cifs_sb_info *cifs_sb = CIFS_SB(sb); kill_anon_super(sb); cifs_umount(cifs_sb); - kfree(cifs_sb->mountdata); - unload_nls(cifs_sb->local_nls); - kfree(cifs_sb); } static int @@ -685,15 +682,12 @@ cifs_do_mount(struct file_system_type *fs_type, if (IS_ERR(sb)) { root = ERR_CAST(sb); cifs_umount(cifs_sb); - goto out_cifs_sb; + goto out; } if (sb->s_fs_info) { cFYI(1, "Use existing superblock"); cifs_umount(cifs_sb); - kfree(cifs_sb->mountdata); - unload_nls(cifs_sb->local_nls); - kfree(cifs_sb); goto out_shared; } @@ -725,13 +719,6 @@ out_shared: out_super: deactivate_locked_super(sb); - goto out; - -out_cifs_sb: - kfree(cifs_sb->mountdata); - unload_nls(cifs_sb->local_nls); - kfree(cifs_sb); - out: cifs_cleanup_volume_info(&volume_info); return root; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index b270222..ca7fbe3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3362,6 +3362,9 @@ cifs_umount(struct cifs_sb_info *cifs_sb) spin_unlock(&cifs_sb->tlink_tree_lock); bdi_destroy(&cifs_sb->bdi); + kfree(cifs_sb->mountdata); + unload_nls(cifs_sb->local_nls); + kfree(cifs_sb); } int cifs_negotiate_protocol(unsigned int xid, struct cifs_ses *ses) -- cgit v0.10.2 From ee01a14d9ddcf3f832f9ceb837888501cb496e27 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:47:23 -0400 Subject: cifs: close sget() races have ->s_fs_info set by the set() callback passed to sget() Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 46960b7..ba2b2da 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -629,6 +629,13 @@ out: return dparent; } +static int cifs_set_super(struct super_block *sb, void *data) +{ + struct cifs_mnt_data *mnt_data = data; + sb->s_fs_info = mnt_data->cifs_sb; + return set_anon_super(sb, NULL); +} + static struct dentry * cifs_do_mount(struct file_system_type *fs_type, int flags, const char *dev_name, void *data) @@ -678,14 +685,14 @@ cifs_do_mount(struct file_system_type *fs_type, mnt_data.cifs_sb = cifs_sb; mnt_data.flags = flags; - sb = sget(fs_type, cifs_match_super, set_anon_super, &mnt_data); + sb = sget(fs_type, cifs_match_super, cifs_set_super, &mnt_data); if (IS_ERR(sb)) { root = ERR_CAST(sb); cifs_umount(cifs_sb); goto out; } - if (sb->s_fs_info) { + if (sb->s_root) { cFYI(1, "Use existing superblock"); cifs_umount(cifs_sb); goto out_shared; @@ -694,7 +701,6 @@ cifs_do_mount(struct file_system_type *fs_type, sb->s_flags = flags; /* BB should we make this contingent on mount parm? */ sb->s_flags |= MS_NODIRATIME | MS_NOATIME; - sb->s_fs_info = cifs_sb; rc = cifs_read_super(sb); if (rc) { -- cgit v0.10.2 From fa18f1bdce898f0efd0c8639c901d826d01be04f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:50:44 -0400 Subject: cifs: more breakage on mount failures if cifs_get_root() fails, we end up with ->mount() returning NULL, which is not what callers expect. Moreover, in case of superblock reuse we end up leaking a superblock reference... Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index ba2b2da..234e9d0 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -710,19 +710,16 @@ cifs_do_mount(struct file_system_type *fs_type, sb->s_flags |= MS_ACTIVE; +out_shared: root = cifs_get_root(volume_info, sb); - if (root == NULL) + if (root == NULL) { + root = ERR_PTR(-EINVAL); /* XXX */ goto out_super; + } cFYI(1, "dentry root is: %p", root); goto out; -out_shared: - root = cifs_get_root(volume_info, sb); - if (root) - cFYI(1, "dentry root is: %p", root); - goto out; - out_super: deactivate_locked_super(sb); out: -- cgit v0.10.2 From 5c4f1ad7c6aa3b729bd3a93b80f9417d7e978c32 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 09:56:55 -0400 Subject: cifs: tidy cifs_do_mount() up a bit Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 234e9d0..9a6696a 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -656,16 +656,13 @@ cifs_do_mount(struct file_system_type *fs_type, cifs_sb = kzalloc(sizeof(struct cifs_sb_info), GFP_KERNEL); if (cifs_sb == NULL) { root = ERR_PTR(-ENOMEM); - unload_nls(volume_info->local_nls); - goto out; + goto out_nls; } cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL); if (cifs_sb->mountdata == NULL) { root = ERR_PTR(-ENOMEM); - unload_nls(volume_info->local_nls); - kfree(cifs_sb); - goto out; + goto out_cifs_sb; } cifs_setup_cifs_sb(volume_info, cifs_sb); @@ -675,10 +672,7 @@ cifs_do_mount(struct file_system_type *fs_type, if (!(flags & MS_SILENT)) cERROR(1, "cifs_mount failed w/return code = %d", rc); root = ERR_PTR(rc); - unload_nls(volume_info->local_nls); - kfree(cifs_sb->mountdata); - kfree(cifs_sb); - goto out; + goto out_mountdata; } mnt_data.vol = volume_info; @@ -695,22 +689,20 @@ cifs_do_mount(struct file_system_type *fs_type, if (sb->s_root) { cFYI(1, "Use existing superblock"); cifs_umount(cifs_sb); - goto out_shared; - } - - sb->s_flags = flags; - /* BB should we make this contingent on mount parm? */ - sb->s_flags |= MS_NODIRATIME | MS_NOATIME; + } else { + sb->s_flags = flags; + /* BB should we make this contingent on mount parm? */ + sb->s_flags |= MS_NODIRATIME | MS_NOATIME; + + rc = cifs_read_super(sb); + if (rc) { + root = ERR_PTR(rc); + goto out_super; + } - rc = cifs_read_super(sb); - if (rc) { - root = ERR_PTR(rc); - goto out_super; + sb->s_flags |= MS_ACTIVE; } - sb->s_flags |= MS_ACTIVE; - -out_shared: root = cifs_get_root(volume_info, sb); if (root == NULL) { root = ERR_PTR(-EINVAL); /* XXX */ @@ -725,6 +717,14 @@ out_super: out: cifs_cleanup_volume_info(&volume_info); return root; + +out_mountdata: + kfree(cifs_sb->mountdata); +out_cifs_sb: + kfree(cifs_sb); +out_nls: + unload_nls(volume_info->local_nls); + goto out; } static ssize_t cifs_file_aio_write(struct kiocb *iocb, const struct iovec *iov, -- cgit v0.10.2 From 9403c9c598e91d473c0582066e47ed2289292e45 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 Jun 2011 10:02:59 -0400 Subject: cifs: propagate errors from cifs_get_root() to mount(2) ... instead of just failing with -EINVAL Acked-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Al Viro diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 9a6696a..35f9154 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -554,7 +554,7 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) full_path = cifs_build_path_to_root(vol, cifs_sb, cifs_sb_master_tcon(cifs_sb)); if (full_path == NULL) - return NULL; + return ERR_PTR(-ENOMEM); cFYI(1, "Get root dentry for %s", full_path); @@ -583,7 +583,7 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) dchild = d_alloc(dparent, &name); if (dchild == NULL) { dput(dparent); - dparent = NULL; + dparent = ERR_PTR(-ENOMEM); goto out; } } @@ -601,7 +601,7 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) if (rc) { dput(dchild); dput(dparent); - dparent = NULL; + dparent = ERR_PTR(rc); goto out; } alias = d_materialise_unique(dchild, inode); @@ -609,7 +609,7 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) dput(dchild); if (IS_ERR(alias)) { dput(dparent); - dparent = NULL; + dparent = ERR_PTR(-EINVAL); /* XXX */ goto out; } dchild = alias; @@ -704,10 +704,8 @@ cifs_do_mount(struct file_system_type *fs_type, } root = cifs_get_root(volume_info, sb); - if (root == NULL) { - root = ERR_PTR(-EINVAL); /* XXX */ + if (IS_ERR(root)) goto out_super; - } cFYI(1, "dentry root is: %p", root); goto out; -- cgit v0.10.2 From a6b3ff9f0d7275e9e2ba3295f585d01f99aeb295 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Tue, 21 Jun 2011 03:13:03 +0000 Subject: MAINTAINERS: Remove Sven Eckelmann from BATMAN ADVANCED I cannot speak on behalf of the batman-adv developers due to conflicts in the opinion about the ongoing development. The batman-adv module is still maintained by Marek Lindner and Simon Wunderlich. Those are the main persons behind the visions of batman-adv. Therefore, the state of module hasn't changed. Signed-off-by: Sven Eckelmann Cc: b.a.t.m.a.n@lists.open-mesh.org Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index f0358cd..3e112ee41 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1390,7 +1390,6 @@ F: include/linux/backlight.h BATMAN ADVANCED M: Marek Lindner M: Simon Wunderlich -M: Sven Eckelmann L: b.a.t.m.a.n@lists.open-mesh.org W: http://www.open-mesh.org/ S: Maintained -- cgit v0.10.2 From 7cacd43cdd2e4ebba9574635f05538f4053fd725 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 24 Jun 2011 17:42:14 -0700 Subject: MAINTAINERS: mark socketcan-core lists as subscribers-only The socketcan-core lists require subscription, so mark them as such. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 3e112ee41..03bf50c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1638,7 +1638,7 @@ CAN NETWORK LAYER M: Oliver Hartkopp M: Oliver Hartkopp M: Urs Thuermann -L: socketcan-core@lists.berlios.de +L: socketcan-core@lists.berlios.de (subscribers-only) L: netdev@vger.kernel.org W: http://developer.berlios.de/projects/socketcan/ S: Maintained @@ -1650,7 +1650,7 @@ F: include/linux/can/raw.h CAN NETWORK DRIVERS M: Wolfgang Grandegger -L: socketcan-core@lists.berlios.de +L: socketcan-core@lists.berlios.de (subscribers-only) L: netdev@vger.kernel.org W: http://developer.berlios.de/projects/socketcan/ S: Maintained -- cgit v0.10.2 From b997d79a91f7b6be952b98cf9d9585b124558f5b Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Wed, 22 Jun 2011 06:35:45 +0000 Subject: qlge: Add maintainer. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 03bf50c..05aaf92 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5180,6 +5180,7 @@ S: Supported F: drivers/net/qlcnic/ QLOGIC QLGE 10Gb ETHERNET DRIVER +M: Jitendra Kalsaria M: Ron Mercer M: linux-driver@qlogic.com L: netdev@vger.kernel.org -- cgit v0.10.2 From bd4265fe365c0f3945dd5ff1527e52bbe2bedfa2 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 23 Jun 2011 02:39:12 +0000 Subject: bridge: Only flood unregistered groups to routers The bridge currently floods packets to groups that we have never seen before to all ports. This is not required by RFC4541 and in fact it is not desirable in environment where traffic to unregistered group is always present. This patch changes the behaviour so that we only send traffic to unregistered groups to ports marked as routers. The user can always force flooding behaviour to any given port by marking it as a router. Note that this change does not apply to traffic to 224.0.0.X as traffic to those groups must always be flooded to all ports. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 29b9812..2d85ca7 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1379,8 +1379,11 @@ static int br_multicast_ipv4_rcv(struct net_bridge *br, if (unlikely(ip_fast_csum((u8 *)iph, iph->ihl))) return -EINVAL; - if (iph->protocol != IPPROTO_IGMP) + if (iph->protocol != IPPROTO_IGMP) { + if ((iph->daddr & IGMP_LOCAL_GROUP_MASK) != IGMP_LOCAL_GROUP) + BR_INPUT_SKB_CB(skb)->mrouters_only = 1; return 0; + } len = ntohs(iph->tot_len); if (skb->len < len || len < ip_hdrlen(skb)) -- cgit v0.10.2 From d6fe5f4eccc2a7d2ad885ecb26a192b08dcc7cd1 Mon Sep 17 00:00:00 2001 From: "John (Jay) Hernandez" Date: Thu, 23 Jun 2011 14:39:12 +0000 Subject: cxgb3: skb_record_rx_queue now records the queue index relative to the net_device. Fixed call to skb_record_rx_queue where we were passing the queue index relative to the adapter when it should have been relative to the net_device. Signed-off-by: John (Jay) Hernandez Signed-off-by: Divy Le Ray Reported-by: Shawn Bohrer Signed-off-by: David S. Miller diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 3f562ba..76bf589 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2026,7 +2026,7 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq, skb->ip_summed = CHECKSUM_UNNECESSARY; } else skb_checksum_none_assert(skb); - skb_record_rx_queue(skb, qs - &adap->sge.qs[0]); + skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]); if (unlikely(p->vlan_valid)) { struct vlan_group *grp = pi->vlan_grp; @@ -2145,7 +2145,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, if (!complete) return; - skb_record_rx_queue(skb, qs - &adap->sge.qs[0]); + skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]); if (unlikely(cpl->vlan_valid)) { struct vlan_group *grp = pi->vlan_grp; -- cgit v0.10.2 From 5c1f9668692061b97125e343721c7514ca05a8bb Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 21 Jun 2011 11:24:33 +0800 Subject: at91: fix at91_set_serial_console: use platform device id Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index cd850ed..dba0d8d 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(portnr); + at91cap9_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a0ba475..7227755 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91rm9200_set_console_clock(portnr); + at91rm9200_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 1fdeb90..39f81f4 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9260_set_console_clock(portnr); + at91sam9260_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3eb4538..5004bf0 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9261_set_console_clock(portnr); + at91sam9261_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ffe081b..a050f41 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9263_set_console_clock(portnr); + at91sam9263_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 0567486..600bffb 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9g45_set_console_clock(portnr); + at91sam9g45_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c296045..aacb19d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9rl_set_console_clock(portnr); + at91sam9rl_set_console_clock(at91_uarts[portnr]->id); } } -- cgit v0.10.2 From deba1a0d58b54905a5201cb9e1aa878cfc74ff70 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 21 Jun 2011 12:17:00 +0800 Subject: atmel_serial: fix internal port num the atmel_ports is link to the console number and not the device id this was not detected on at91 as we always register the dbgu on the console as ttyS0 tested on at91sam9263 by setting the dbgu as ttyS1 and use as console diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 70e5646..9b8a14f 100644 - a/arch/arm/mach-at91/board-sam9263ek.c + b/arch/arm/mach-at91/board-sam9263ek.c @@ -58,14 +58,14 @@ static void __init ek_init_early(void) /* Initialize processor: 16.367 MHz crystal */ at91_initialize(16367660); - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); + /* DBGU on ttyS1. (Rx & Tx only) */ + at91_register_uart(0, 1, 0); - /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + /* USART0 on ttyS0. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9263_ID_US0, 0, ATMEL_UART_CTS | ATMEL_UART_RTS); - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); + /* set serial console to ttyS1 (ie, DBGU) */ + at91_set_serial_console(1); } /* Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Alan Cox Cc: Hans-Christian Egtvedt diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 6d5d6e6..af9b781 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1709,12 +1709,13 @@ static int atmel_serial_resume(struct platform_device *pdev) static int __devinit atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *port; + struct atmel_uart_data *pdata = pdev->dev.platform_data; void *data; int ret; BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); - port = &atmel_ports[pdev->id]; + port = &atmel_ports[pdata->num]; port->backup_imr = 0; atmel_init_port(port, pdev); -- cgit v0.10.2 From 9d87159e571d73ccf87adf1ee3691b861253d900 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 21 Jun 2011 14:24:33 +0800 Subject: at91: fix udc, ehci and mmc clock device name for cap9/9g45/9rl Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 17fae4a..5e6f8a7 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -223,8 +223,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2bb6ff9..11e2141 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = { static struct clk_lookup periph_clocks_lookups[] = { /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 1a40f16..29dff18 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), -- cgit v0.10.2 From c5efefac659870744f6e203e28abd095ac0f590b Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 2 Jun 2011 01:36:09 +0200 Subject: at91: Use "pclk" as con_id on at91cap9 and at91rm9200 Hello, I am not 100% sure this is the right thing to do, but it makes the atmel-ssc driver happy on my at91rm9200 board. This unifies the con_id across all at91 machines. The atmel-ssc driver expects the con_id to be "pclk" or it will fail probing. Signed-off-by: Joachim Eastwood Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 5e6f8a7..f1013d0 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -230,8 +230,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b228ce9..83a1a3f 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), }; static struct clk_lookup usart_clocks_lookups[] = { -- cgit v0.10.2 From e0f5406727f1dfdc47b8ba4a0ff6eae4b0b5ed4c Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sat, 18 Jun 2011 20:26:38 +0000 Subject: Btrfs: fix type mismatch in find_free_extent() data parameter should be u64 because a full-sized chunk flags field is passed instead of 0/1 for distinguishing data from metadata. All underlying functions expect u64. Signed-off-by: Ilya Dryomov Signed-off-by: Chris Mason diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 1f61bf5..71cd456 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4842,7 +4842,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, u64 num_bytes, u64 empty_size, u64 search_start, u64 search_end, u64 hint_byte, struct btrfs_key *ins, - int data) + u64 data) { int ret = 0; struct btrfs_root *root = orig_root->fs_info->extent_root; @@ -4869,7 +4869,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, space_info = __find_space_info(root->fs_info, data); if (!space_info) { - printk(KERN_ERR "No space info for %d\n", data); + printk(KERN_ERR "No space info for %llu\n", data); return -ENOSPC; } -- cgit v0.10.2 From 9b90f5135320bc74dc6c9a8c74d69fd4821d9282 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 24 Jun 2011 16:02:51 +0000 Subject: Btrfs: make sure to update total_bitmaps when freeing cache V3 A user reported this bug again where we have more bitmaps than we are supposed to. This is because we failed to load the free space cache, but don't update the ctl->total_bitmaps counter when we remove entries from the tree. This patch fixes this problem and we should be good to go again. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 9f985a4..bf0d615 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1893,9 +1893,12 @@ void __btrfs_remove_free_space_cache_locked(struct btrfs_free_space_ctl *ctl) while ((node = rb_last(&ctl->free_space_offset)) != NULL) { info = rb_entry(node, struct btrfs_free_space, offset_index); - unlink_free_space(ctl, info); - kfree(info->bitmap); - kmem_cache_free(btrfs_free_space_cachep, info); + if (!info->bitmap) { + unlink_free_space(ctl, info); + kmem_cache_free(btrfs_free_space_cachep, info); + } else { + free_bitmap(ctl, info); + } if (need_resched()) { spin_unlock(&ctl->tree_lock); cond_resched(); -- cgit v0.10.2 From 297c7f2f158f7dfa9ab5813260ff954f9c2f83d2 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Thu, 9 Jun 2011 23:40:27 +0000 Subject: mmc: sdio: fix runtime PM path during driver removal After commit e1866b3 "PM / Runtime: Rework runtime PM handling during driver removal" was introduced, the driver core stopped incrementing the runtime PM usage counter of the device during the invocation of the ->remove() callback. This indirectly broke SDIO's runtime PM path during driver removal, because no one calls _put_sync() anymore after ->remove() completes. This means that the power of runtime-PM-managed SDIO cards is kept high after their driver is removed (even if it was powered down beforehand). Fix that by directly calling _put_sync() when the last usage counter is downref'ed by the SDIO bus. Reported-and-tested-by: Daniel Drake Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index d29b9c3..d2565df 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -189,7 +189,7 @@ static int sdio_bus_remove(struct device *dev) /* Then undo the runtime PM settings in sdio_bus_probe() */ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); out: return ret; -- cgit v0.10.2 From 4a3dc6ef344ccfe80bf986aec0b05f51af000720 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Tue, 14 Jun 2011 15:59:59 +0530 Subject: mmc: omap_hsmmc: fix ocr mask usage The OMAP HSMMC driver uses an ocr_mask to determine the list of voltages supported by the card. It populates this mask based on the list of voltages supported by the regulator that supplies the voltage. Commit 64be97822b (omap4 hsmmc: Update ocr mask for MMC2 for regulator to use) passed a fixed ocr_mask from the OMAP4 SDP board file to limit the voltage to 2.9-3.0 Volts, and updated the driver to use this mask if provided, instead of using the regulator's supported voltages. However the commit is buggy - the ocr_mask is overridden by the regulator's capabilities anyway. Fix this. (The bug shows up when a system-wide suspend is attempted on the OMAP4 SDP/Blaze platforms. The eMMC card comes up at 3V, but drops to 1.65V after the system resumes). Signed-off-by: Anand Gadiyar Acked-by: Balaji T K Acked-by: Venkatraman S Tested-by: Kishore Kadiyala Signed-off-by: Sourav Poddar Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 5b2e215..8707bcd 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -429,7 +429,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) return -EINVAL; } } - mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); /* Allow an aux regulator */ reg = regulator_get(host->dev, "vmmc_aux"); -- cgit v0.10.2 From a9120c33ffbb0b3448d833dae392edc90d6cfac2 Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Fri, 17 Jun 2011 20:14:21 +0200 Subject: mmc: omap_hsmmc: use original sg_len for dma_unmap_sg Don't use the returned sg_len from dma_map_sg() as inparameter to dma_unmap_sg(). Use the original sg_len for both dma_map_sg and dma_unmap_sg according to the documentation in DMA-API.txt. Signed-off-by: Per Forlin Reviewed-by: Venkatraman S Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 8707bcd..dedf3da 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -961,7 +961,8 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) spin_unlock(&host->irq_lock); if (host->use_dma && dma_ch != -1) { - dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, + dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, + host->data->sg_len, omap_hsmmc_get_dma_dir(host, host->data)); omap_free_dma(dma_ch); } @@ -1345,7 +1346,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) return; } - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, omap_hsmmc_get_dma_dir(host, data)); req_in_progress = host->req_in_progress; -- cgit v0.10.2 From 7d8b4c2a4b73da8e3632603691838ca5b2a8c26d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 20 Jun 2011 16:51:10 +0200 Subject: mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handling Commit b6147490e6aac82 ("mmc: tmio: split core functionality, DMA and MFD glue") broke handling of the TMIO_MMC_WRPROTECT_DISABLE flag by the tmio-mmc driver. This patch restores the original behaviour. Signed-off-by: Guennadi Liakhovetski Cc: Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index ad6347b..0b09e82 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -824,8 +824,8 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc) struct tmio_mmc_host *host = mmc_priv(mmc); struct tmio_mmc_data *pdata = host->pdata; - return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || - !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); + return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || + (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); } static int tmio_mmc_get_cd(struct mmc_host *mmc) -- cgit v0.10.2 From 3e713373ce07b9f59c3901e7d39bc1edccda28da Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 24 May 2011 12:24:07 +0200 Subject: mmc: sdhi: DMA slave ID 0 is invalid Don't try to allocate DMA resources if the platform didn't specify positive DMA slave IDs. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index 2353bb7..ce500f0 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -92,7 +92,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data->ocr_mask = p->tmio_ocr_mask; mmc_data->capabilities |= p->tmio_caps; - if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { + if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) { priv->param_tx.slave_id = p->dma_slave_tx; priv->param_rx.slave_id = p->dma_slave_rx; priv->dma_priv.chan_priv_tx = &priv->param_tx; -- cgit v0.10.2 From e9e8bcb8178e197d889ec31e79fa1ddc1732c8f9 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 21 Jun 2011 10:55:34 +0100 Subject: mmc: cb710: fix #ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HAVE_EFFICIENT_UNALIGNED_ACCESS is a config option, therefore it needs the CONFIG_ before it when used by the preprocessor. Signed-off-by: James Hogan Acked-by: Michał Mirosław Signed-off-by: Chris Ball diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c index d019746..2a40d0e 100644 --- a/drivers/misc/cb710/sgbuf2.c +++ b/drivers/misc/cb710/sgbuf2.c @@ -47,7 +47,7 @@ static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter) static inline bool needs_unaligned_copy(const void *ptr) { -#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS return false; #else return ((ptr - NULL) & 3) != 0; -- cgit v0.10.2 From c6e633ad916e2af244dbfd11abd2bc077870bdfd Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 25 Jun 2011 19:20:11 +0100 Subject: mmc: sdio: reset card during power_restore mmc_sdio_power_restore() skips some steps that are performed in other power-related codepaths which are necessary to fully reset the card. Without this, runtime PM fails for SD8686 SDIO wifi on OLPC XO-1.5. Signed-off-by: Daniel Drake Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 4d0c15b..262fff0 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -691,15 +691,54 @@ static int mmc_sdio_resume(struct mmc_host *host) static int mmc_sdio_power_restore(struct mmc_host *host) { int ret; + u32 ocr; BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); + + /* + * Reset the card by performing the same steps that are taken by + * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. + * + * sdio_reset() is technically not needed. Having just powered up the + * hardware, it should already be in reset state. However, some + * platforms (such as SD8686 on OLPC) do not instantly cut power, + * meaning that a reset is required when restoring power soon after + * powering off. It is harmless in other cases. + * + * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, + * is not necessary for non-removable cards. However, it is required + * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and + * harmless in other situations. + * + * With these steps taken, mmc_select_voltage() is also required to + * restore the correct voltage setting of the card. + */ + sdio_reset(host); + mmc_go_idle(host); + mmc_send_if_cond(host, host->ocr_avail); + + ret = mmc_send_io_op_cond(host, 0, &ocr); + if (ret) + goto out; + + if (host->ocr_avail_sdio) + host->ocr_avail = host->ocr_avail_sdio; + + host->ocr = mmc_select_voltage(host, ocr & ~0x7F); + if (!host->ocr) { + ret = -EINVAL; + goto out; + } + ret = mmc_sdio_init_card(host, host->ocr, host->card, mmc_card_keep_power(host)); if (!ret && host->sdio_irqs) mmc_signal_sdio_irq(host); + +out: mmc_release_host(host); return ret; -- cgit v0.10.2 From ddd6fa7e794e62af3ec3eb4ffdc78489885701f2 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 23 Jun 2011 13:40:26 +0300 Subject: mmc: block: switch card to User Data Area when removing the block driver The MMC block driver and other drivers (e.g. mmc-test) will expect the card to be switched to the User Data Area eMMC partition when they start. Hence the MMC block driver should ensure it is that way when it is removed. Signed-off-by: Adrian Hunter Cc: Andrei Warkentin Signed-off-by: Chris Ball diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 71da564..77cd083 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1297,6 +1297,9 @@ static void mmc_blk_remove(struct mmc_card *card) struct mmc_blk_data *md = mmc_get_drvdata(card); mmc_blk_remove_parts(card, md); + mmc_claim_host(card->host); + mmc_blk_part_switch(card, md); + mmc_release_host(card->host); mmc_blk_remove_req(md); mmc_set_drvdata(card, NULL); } -- cgit v0.10.2 From 4cf8c6dd2e261da94b87c4deadcc136ab022b6ac Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 23 Jun 2011 13:40:27 +0300 Subject: mmc: core: make erase timeout calculation allow for gated clock The erase timeout calculation may depend on clock rate which is zero if the clock is gated, so use mmc_host_clk_rate() which allows for that case. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 68091dd..7843efe 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1245,7 +1245,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, */ timeout_clks <<= 1; timeout_us += (timeout_clks * 1000) / - (card->host->ios.clock / 1000); + (mmc_host_clk_rate(card->host) / 1000); erase_timeout = timeout_us / 1000; -- cgit v0.10.2 From d09408ade08a08a710a247fb52aa50101e73ebf7 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 23 Jun 2011 13:40:28 +0300 Subject: mmc: queue: append partition subname to queue thread name For example, an eMMC with 2 boot partitions will have 3 threads. The names change from: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0 42 ? 00:00:00 mmcqd/0 to: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0boot0 42 ? 00:00:00 mmcqd/0boot1 Signed-off-by: Adrian Hunter Cc: Andrei Warkentin Signed-off-by: Chris Ball diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 77cd083..f85e422 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1024,7 +1024,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, INIT_LIST_HEAD(&md->part); md->usage = 1; - ret = mmc_init_queue(&md->queue, card, &md->lock); + ret = mmc_init_queue(&md->queue, card, &md->lock, subname); if (ret) goto err_putdisk; diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index c07322c..3e2db1c 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -106,10 +106,12 @@ static void mmc_request(struct request_queue *q) * @mq: mmc queue * @card: mmc card to attach this queue * @lock: queue lock + * @subname: partition subname * * Initialise a MMC card request queue. */ -int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock) +int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, + spinlock_t *lock, const char *subname) { struct mmc_host *host = card->host; u64 limit = BLK_BOUNCE_HIGH; @@ -209,8 +211,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock sema_init(&mq->thread_sem, 1); - mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d", - host->index); + mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s", + host->index, subname ? subname : ""); if (IS_ERR(mq->thread)) { ret = PTR_ERR(mq->thread); diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h index 64e66e0..6223ef8 100644 --- a/drivers/mmc/card/queue.h +++ b/drivers/mmc/card/queue.h @@ -19,7 +19,8 @@ struct mmc_queue { unsigned int bounce_sg_len; }; -extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *); +extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *, + const char *); extern void mmc_cleanup_queue(struct mmc_queue *); extern void mmc_queue_suspend(struct mmc_queue *); extern void mmc_queue_resume(struct mmc_queue *); -- cgit v0.10.2 From c31b55cd4eaf050bb5a15bd8251da1b3c7edeb1c Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 23 Jun 2011 13:40:29 +0300 Subject: mmc: queue: bring discard_granularity/alignment into line with SCSI SCSI defines discard alignment as the offset to the first optimal discard. In the case of SD/MMC, that is always zero which is the default. SCSI defines discard granularity as a hint of a optimal discard size. That is much better expressed by the MMC "preferred erase size" (pref_erase) field. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 3e2db1c..6413afa 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -135,12 +135,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, mq->queue->limits.max_discard_sectors = UINT_MAX; if (card->erased_byte == 0) mq->queue->limits.discard_zeroes_data = 1; - if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) { - mq->queue->limits.discard_granularity = - card->erase_size << 9; - mq->queue->limits.discard_alignment = - card->erase_size << 9; - } + mq->queue->limits.discard_granularity = card->pref_erase << 9; if (mmc_can_secure_erase_trim(card)) queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, mq->queue); -- cgit v0.10.2 From 8c9f3aaf8e174ca914889ab7a916586f8fd1e641 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 16 Jun 2011 09:19:13 -0700 Subject: drm/i915: split page flip queueing into per-chipset functions This makes things a little clearer and prevents us from running old code on a new chipset that may not be supported. Signed-off-by: Jesse Barnes Reviewied-by: Ben Widawsky Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f63ee16..eddabf6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -211,6 +211,9 @@ struct drm_i915_display_funcs { void (*fdi_link_train)(struct drm_crtc *crtc); void (*init_clock_gating)(struct drm_device *dev); void (*init_pch_clock_gating)(struct drm_device *dev); + int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj); /* clock updates for mode set */ /* cursor updates */ /* render clock increase/decrease */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index aa43e7b..0f4ed2a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6261,6 +6261,164 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane) spin_unlock_irqrestore(&dev->event_lock, flags); } +static int intel_gen2_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + unsigned long offset; + u32 flip_mask; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + /* Offset into the new buffer for cases of shared fbs between CRTCs */ + offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; + + ret = BEGIN_LP_RING(6); + if (ret) + goto out; + + /* Can't queue multiple flips, so wait for the previous + * one to finish before executing the next. + */ + if (intel_crtc->plane) + flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; + else + flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; + OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); + OUT_RING(MI_NOOP); + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset + offset); + OUT_RING(MI_NOOP); + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen3_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + unsigned long offset; + u32 flip_mask; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + /* Offset into the new buffer for cases of shared fbs between CRTCs */ + offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; + + ret = BEGIN_LP_RING(6); + if (ret) + goto out; + + if (intel_crtc->plane) + flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; + else + flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; + OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); + OUT_RING(MI_NOOP); + OUT_RING(MI_DISPLAY_FLIP_I915 | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset + offset); + OUT_RING(MI_NOOP); + + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen4_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pf, pipesrc; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + ret = BEGIN_LP_RING(4); + if (ret) + goto out; + + /* i965+ uses the linear or tiled offsets from the + * Display Registers (which do not change across a page-flip) + * so we need only reprogram the base address. + */ + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset | obj->tiling_mode); + + /* XXX Enabling the panel-fitter across page-flip is so far + * untested on non-native modes, so ignore it for now. + * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; + */ + pf = 0; + pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen6_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pf, pipesrc; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + ret = BEGIN_LP_RING(4); + if (ret) + goto out; + + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch | obj->tiling_mode); + OUT_RING(obj->gtt_offset); + + pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; + pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_default_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + return -ENODEV; +} + static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event) @@ -6271,9 +6429,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_i915_gem_object *obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; - unsigned long flags, offset; - int pipe = intel_crtc->pipe; - u32 pf, pipesrc; + unsigned long flags; int ret; work = kzalloc(sizeof *work, GFP_KERNEL); @@ -6302,9 +6458,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, obj = intel_fb->obj; mutex_lock(&dev->struct_mutex); - ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); - if (ret) - goto cleanup_work; /* Reference the objects for the scheduled work. */ drm_gem_object_reference(&work->old_fb_obj->base); @@ -6316,91 +6469,18 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, if (ret) goto cleanup_objs; - if (IS_GEN3(dev) || IS_GEN2(dev)) { - u32 flip_mask; - - /* Can't queue multiple flips, so wait for the previous - * one to finish before executing the next. - */ - ret = BEGIN_LP_RING(2); - if (ret) - goto cleanup_objs; - - if (intel_crtc->plane) - flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; - else - flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; - OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); - OUT_RING(MI_NOOP); - ADVANCE_LP_RING(); - } - work->pending_flip_obj = obj; work->enable_stall_check = true; - /* Offset into the new buffer for cases of shared fbs between CRTCs */ - offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; - - ret = BEGIN_LP_RING(4); - if (ret) - goto cleanup_objs; - /* Block clients from rendering to the new back buffer until * the flip occurs and the object is no longer visible. */ atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); - switch (INTEL_INFO(dev)->gen) { - case 2: - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset + offset); - OUT_RING(MI_NOOP); - break; - - case 3: - OUT_RING(MI_DISPLAY_FLIP_I915 | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset + offset); - OUT_RING(MI_NOOP); - break; - - case 4: - case 5: - /* i965+ uses the linear or tiled offsets from the - * Display Registers (which do not change across a page-flip) - * so we need only reprogram the base address. - */ - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset | obj->tiling_mode); - - /* XXX Enabling the panel-fitter across page-flip is so far - * untested on non-native modes, so ignore it for now. - * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; - */ - pf = 0; - pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff; - OUT_RING(pf | pipesrc); - break; - - case 6: - case 7: - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch | obj->tiling_mode); - OUT_RING(obj->gtt_offset); - - pf = I915_READ(PF_CTL(pipe)) & PF_ENABLE; - pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff; - OUT_RING(pf | pipesrc); - break; - } - ADVANCE_LP_RING(); + ret = dev_priv->display.queue_flip(dev, crtc, fb, obj); + if (ret) + goto cleanup_pending; mutex_unlock(&dev->struct_mutex); @@ -6408,10 +6488,11 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, return 0; +cleanup_pending: + atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); cleanup_objs: drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); -cleanup_work: mutex_unlock(&dev->struct_mutex); spin_lock_irqsave(&dev->event_lock, flags); @@ -7656,6 +7737,28 @@ static void intel_init_display(struct drm_device *dev) else dev_priv->display.get_fifo_size = i830_get_fifo_size; } + + /* Default just returns -ENODEV to indicate unsupported */ + dev_priv->display.queue_flip = intel_default_queue_flip; + + switch (INTEL_INFO(dev)->gen) { + case 2: + dev_priv->display.queue_flip = intel_gen2_queue_flip; + break; + + case 3: + dev_priv->display.queue_flip = intel_gen3_queue_flip; + break; + + case 4: + case 5: + dev_priv->display.queue_flip = intel_gen4_queue_flip; + break; + + case 6: + dev_priv->display.queue_flip = intel_gen6_queue_flip; + break; + } } /* -- cgit v0.10.2 From 7c9017e5b77118439952fe8dc22809bae4fae4b6 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 16 Jun 2011 12:18:54 -0700 Subject: drm/i915: add Ivy Bridge page flip support Use the blit ring for submitting flips since the render ring doesn't generate flip complete interrupts. Fixes bugs: https://bugs.freedesktop.org/show_bug.cgi?id=38362 https://bugs.freedesktop.org/show_bug.cgi?id=38392 https://bugs.freedesktop.org/show_bug.cgi?id=38393 Signed-off-by: Jesse Barnes Reviewed-by: Daniel Vetter Reviewed-by: Kenneth Graunke Reviewed-by: Ben Widawsky Tested-by: Jian J Zhao Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0f4ed2a..21b6f93 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6411,6 +6411,39 @@ out: return ret; } +/* + * On gen7 we currently use the blit ring because (in early silicon at least) + * the render ring doesn't give us interrpts for page flip completion, which + * means clients will hang after the first flip is queued. Fortunately the + * blit ring generates interrupts properly, so use it instead. + */ +static int intel_gen7_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_ring_buffer *ring = &dev_priv->ring[BCS]; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, ring); + if (ret) + goto out; + + ret = intel_ring_begin(ring, 4); + if (ret) + goto out; + + intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19)); + intel_ring_emit(ring, (fb->pitch | obj->tiling_mode)); + intel_ring_emit(ring, (obj->gtt_offset)); + intel_ring_emit(ring, (MI_NOOP)); + intel_ring_advance(ring); +out: + return ret; +} + static int intel_default_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, @@ -7758,6 +7791,9 @@ static void intel_init_display(struct drm_device *dev) case 6: dev_priv->display.queue_flip = intel_gen6_queue_flip; break; + case 7: + dev_priv->display.queue_flip = intel_gen7_queue_flip; + break; } } -- cgit v0.10.2 From 3181faa85bda3dc3f5e630a1846526c9caaa38e3 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 27 Jun 2011 09:03:47 +0200 Subject: cfq-iosched: fix a rcu warning I got a rcu warnning at boot. the ioc->ioc_data is rcu_deferenced, but doesn't hold rcu_read_lock. Signed-off-by: Shaohua Li Cc: stable@kernel.org # after ab4bd22d Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index f379943..fd566c1 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2773,11 +2773,14 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd, smp_wmb(); cic->key = cfqd_dead_key(cfqd); + rcu_read_lock(); if (rcu_dereference(ioc->ioc_data) == cic) { + rcu_read_unlock(); spin_lock(&ioc->lock); rcu_assign_pointer(ioc->ioc_data, NULL); spin_unlock(&ioc->lock); - } + } else + rcu_read_unlock(); if (cic->cfqq[BLK_RW_ASYNC]) { cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]); -- cgit v0.10.2 From 726e99ab88db059fe1422e15376ae404f8c66eb4 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 27 Jun 2011 09:03:48 +0200 Subject: cfq-iosched: make code consistent ioc->ioc_data is rcu protectd, so uses correct API to access it. This doesn't change any behavior, but just make code consistent. Signed-off-by: Shaohua Li Cc: stable@kernel.org # after ab4bd22d Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index fd566c1..ae21919 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3087,7 +3087,8 @@ cfq_drop_dead_cic(struct cfq_data *cfqd, struct io_context *ioc, spin_lock_irqsave(&ioc->lock, flags); - BUG_ON(ioc->ioc_data == cic); + BUG_ON(rcu_dereference_check(ioc->ioc_data, + lockdep_is_held(&ioc->lock)) == cic); radix_tree_delete(&ioc->radix_root, cfqd->cic_index); hlist_del_rcu(&cic->cic_list); -- cgit v0.10.2 From 1107a08a1a3e0f54d535d37ee0c4192acce6a7f3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 27 Jun 2011 07:48:52 -0700 Subject: iwlagn: fix cmd queue unmap When we stop the device while a command is in flight that uses multiple TBs, we can leak the DMA buffers for the second and higher TBs. Fix this by using iwlagn_unmap_tfd() as we do when we normally recover the entry. Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 157a642..8f20065 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -310,10 +310,7 @@ void iwl_cmd_queue_unmap(struct iwl_priv *priv) i = get_cmd_index(q, q->read_ptr); if (txq->meta[i].flags & CMD_MAPPED) { - pci_unmap_single(priv->pci_dev, - dma_unmap_addr(&txq->meta[i], mapping), - dma_unmap_len(&txq->meta[i], len), - PCI_DMA_BIDIRECTIONAL); + iwlagn_unmap_tfd(priv, &txq->meta[i], &txq->tfds[i]); txq->meta[i].flags = 0; } -- cgit v0.10.2 From e815407d395e0b7fd1aa9145d9d0c391191b833c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 27 Jun 2011 07:54:49 -0700 Subject: iwlagn: map command buffers BIDI Evidently, the device sometimes wants to write back to command buffers, even if I see no reason why it should. Allow it to do that. Tested-by: Andy Lutomirski Tested-by: Kyle McMartin Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 8f20065..4707431 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -126,7 +126,7 @@ static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd) } static void iwlagn_unmap_tfd(struct iwl_priv *priv, struct iwl_cmd_meta *meta, - struct iwl_tfd *tfd) + struct iwl_tfd *tfd, enum dma_data_direction dma_dir) { struct pci_dev *dev = priv->pci_dev; int i; @@ -151,7 +151,7 @@ static void iwlagn_unmap_tfd(struct iwl_priv *priv, struct iwl_cmd_meta *meta, /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i), - iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE); + iwl_tfd_tb_get_len(tfd, i), dma_dir); } /** @@ -167,7 +167,8 @@ void iwlagn_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) struct iwl_tfd *tfd_tmp = txq->tfds; int index = txq->q.read_ptr; - iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index]); + iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index], + DMA_TO_DEVICE); /* free SKB */ if (txq->txb) { @@ -310,7 +311,8 @@ void iwl_cmd_queue_unmap(struct iwl_priv *priv) i = get_cmd_index(q, q->read_ptr); if (txq->meta[i].flags & CMD_MAPPED) { - iwlagn_unmap_tfd(priv, &txq->meta[i], &txq->tfds[i]); + iwlagn_unmap_tfd(priv, &txq->meta[i], &txq->tfds[i], + DMA_BIDIRECTIONAL); txq->meta[i].flags = 0; } @@ -692,10 +694,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) if (!(cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY)) continue; phys_addr = pci_map_single(priv->pci_dev, (void *)cmd->data[i], - cmd->len[i], PCI_DMA_TODEVICE); + cmd->len[i], DMA_BIDIRECTIONAL); if (pci_dma_mapping_error(priv->pci_dev, phys_addr)) { iwlagn_unmap_tfd(priv, out_meta, - &txq->tfds[q->write_ptr]); + &txq->tfds[q->write_ptr], + DMA_BIDIRECTIONAL); idx = -ENOMEM; goto out; } @@ -799,7 +802,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) cmd = txq->cmd[cmd_index]; meta = &txq->meta[cmd_index]; - iwlagn_unmap_tfd(priv, meta, &txq->tfds[index]); + iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], DMA_BIDIRECTIONAL); /* Input error checking is done when commands are added to queue. */ if (meta->flags & CMD_WANT_SKB) { -- cgit v0.10.2 From 2f7e33d432d097a2a7f467b031bf18be91cb3d49 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Thu, 23 Jun 2011 07:27:13 +0000 Subject: btrfs: fix inconsonant inode information When iputting the inode, We may leave the delayed nodes if they have some delayed items that have not been dealt with. So when the inode is read again, we must look up the relative delayed node, and use the information in it to initialize the inode. Or we will get inconsonant inode information, it may cause that the same directory index number is allocated again, and hit the following oops: [ 5447.554187] err add delayed dir index item(name: pglog_0.965_0) into the insertion tree of the delayed node(root id: 262, inode id: 258, errno: -17) [ 5447.569766] ------------[ cut here ]------------ [ 5447.575361] kernel BUG at fs/btrfs/delayed-inode.c:1301! [SNIP] [ 5447.790721] Call Trace: [ 5447.793191] [] btrfs_insert_dir_item+0x189/0x1bb [btrfs] [ 5447.800156] [] btrfs_add_link+0x12b/0x191 [btrfs] [ 5447.806517] [] btrfs_add_nondir+0x31/0x58 [btrfs] [ 5447.812876] [] btrfs_create+0xf9/0x197 [btrfs] [ 5447.818961] [] vfs_create+0x72/0x92 [ 5447.824090] [] do_last+0x22c/0x40b [ 5447.829133] [] path_openat+0xc0/0x2ef [ 5447.834438] [] ? __perf_event_task_sched_out+0x24/0x44 [ 5447.841216] [] ? perf_event_task_sched_out+0x59/0x67 [ 5447.847846] [] do_filp_open+0x3d/0x87 [ 5447.853156] [] ? strncpy_from_user+0x43/0x4d [ 5447.859072] [] ? getname_flags+0x2e/0x80 [ 5447.864636] [] ? do_getname+0x14b/0x173 [ 5447.870112] [] ? audit_getname+0x16/0x26 [ 5447.875682] [] ? spin_lock+0xe/0x10 [ 5447.880882] [] do_sys_open+0x69/0xae [ 5447.886153] [] sys_open+0x20/0x22 [ 5447.891114] [] system_call_fastpath+0x16/0x1b Fix it by reusing the old delayed node. Reported-by: Jim Schutt Signed-off-by: Miao Xie Tested-by: Jim Schutt Signed-off-by: Chris Mason diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index f1cbd02..98c68e6 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -82,19 +82,16 @@ static inline struct btrfs_delayed_root *btrfs_get_delayed_root( return root->fs_info->delayed_root; } -static struct btrfs_delayed_node *btrfs_get_or_create_delayed_node( - struct inode *inode) +static struct btrfs_delayed_node *btrfs_get_delayed_node(struct inode *inode) { - struct btrfs_delayed_node *node; struct btrfs_inode *btrfs_inode = BTRFS_I(inode); struct btrfs_root *root = btrfs_inode->root; u64 ino = btrfs_ino(inode); - int ret; + struct btrfs_delayed_node *node; -again: node = ACCESS_ONCE(btrfs_inode->delayed_node); if (node) { - atomic_inc(&node->refs); /* can be accessed */ + atomic_inc(&node->refs); return node; } @@ -102,8 +99,10 @@ again: node = radix_tree_lookup(&root->delayed_nodes_tree, ino); if (node) { if (btrfs_inode->delayed_node) { + atomic_inc(&node->refs); /* can be accessed */ + BUG_ON(btrfs_inode->delayed_node != node); spin_unlock(&root->inode_lock); - goto again; + return node; } btrfs_inode->delayed_node = node; atomic_inc(&node->refs); /* can be accessed */ @@ -113,6 +112,23 @@ again: } spin_unlock(&root->inode_lock); + return NULL; +} + +static struct btrfs_delayed_node *btrfs_get_or_create_delayed_node( + struct inode *inode) +{ + struct btrfs_delayed_node *node; + struct btrfs_inode *btrfs_inode = BTRFS_I(inode); + struct btrfs_root *root = btrfs_inode->root; + u64 ino = btrfs_ino(inode); + int ret; + +again: + node = btrfs_get_delayed_node(inode); + if (node) + return node; + node = kmem_cache_alloc(delayed_node_cache, GFP_NOFS); if (!node) return ERR_PTR(-ENOMEM); @@ -548,19 +564,6 @@ struct btrfs_delayed_item *__btrfs_next_delayed_item( return next; } -static inline struct btrfs_delayed_node *btrfs_get_delayed_node( - struct inode *inode) -{ - struct btrfs_inode *btrfs_inode = BTRFS_I(inode); - struct btrfs_delayed_node *delayed_node; - - delayed_node = btrfs_inode->delayed_node; - if (delayed_node) - atomic_inc(&delayed_node->refs); - - return delayed_node; -} - static inline struct btrfs_root *btrfs_get_fs_root(struct btrfs_root *root, u64 root_id) { @@ -1404,8 +1407,7 @@ end: int btrfs_inode_delayed_dir_index_count(struct inode *inode) { - struct btrfs_delayed_node *delayed_node = BTRFS_I(inode)->delayed_node; - int ret = 0; + struct btrfs_delayed_node *delayed_node = btrfs_get_delayed_node(inode); if (!delayed_node) return -ENOENT; @@ -1415,11 +1417,14 @@ int btrfs_inode_delayed_dir_index_count(struct inode *inode) * a new directory index is added into the delayed node and index_cnt * is updated now. So we needn't lock the delayed node. */ - if (!delayed_node->index_cnt) + if (!delayed_node->index_cnt) { + btrfs_release_delayed_node(delayed_node); return -EINVAL; + } BTRFS_I(inode)->index_cnt = delayed_node->index_cnt; - return ret; + btrfs_release_delayed_node(delayed_node); + return 0; } void btrfs_get_delayed_items(struct inode *inode, struct list_head *ins_list, @@ -1613,6 +1618,57 @@ static void fill_stack_inode_item(struct btrfs_trans_handle *trans, inode->i_ctime.tv_nsec); } +int btrfs_fill_inode(struct inode *inode, u32 *rdev) +{ + struct btrfs_delayed_node *delayed_node; + struct btrfs_inode_item *inode_item; + struct btrfs_timespec *tspec; + + delayed_node = btrfs_get_delayed_node(inode); + if (!delayed_node) + return -ENOENT; + + mutex_lock(&delayed_node->mutex); + if (!delayed_node->inode_dirty) { + mutex_unlock(&delayed_node->mutex); + btrfs_release_delayed_node(delayed_node); + return -ENOENT; + } + + inode_item = &delayed_node->inode_item; + + inode->i_uid = btrfs_stack_inode_uid(inode_item); + inode->i_gid = btrfs_stack_inode_gid(inode_item); + btrfs_i_size_write(inode, btrfs_stack_inode_size(inode_item)); + inode->i_mode = btrfs_stack_inode_mode(inode_item); + inode->i_nlink = btrfs_stack_inode_nlink(inode_item); + inode_set_bytes(inode, btrfs_stack_inode_nbytes(inode_item)); + BTRFS_I(inode)->generation = btrfs_stack_inode_generation(inode_item); + BTRFS_I(inode)->sequence = btrfs_stack_inode_sequence(inode_item); + inode->i_rdev = 0; + *rdev = btrfs_stack_inode_rdev(inode_item); + BTRFS_I(inode)->flags = btrfs_stack_inode_flags(inode_item); + + tspec = btrfs_inode_atime(inode_item); + inode->i_atime.tv_sec = btrfs_stack_timespec_sec(tspec); + inode->i_atime.tv_nsec = btrfs_stack_timespec_nsec(tspec); + + tspec = btrfs_inode_mtime(inode_item); + inode->i_mtime.tv_sec = btrfs_stack_timespec_sec(tspec); + inode->i_mtime.tv_nsec = btrfs_stack_timespec_nsec(tspec); + + tspec = btrfs_inode_ctime(inode_item); + inode->i_ctime.tv_sec = btrfs_stack_timespec_sec(tspec); + inode->i_ctime.tv_nsec = btrfs_stack_timespec_nsec(tspec); + + inode->i_generation = BTRFS_I(inode)->generation; + BTRFS_I(inode)->index_cnt = (u64)-1; + + mutex_unlock(&delayed_node->mutex); + btrfs_release_delayed_node(delayed_node); + return 0; +} + int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode) { diff --git a/fs/btrfs/delayed-inode.h b/fs/btrfs/delayed-inode.h index d1a6a29..8d27af4 100644 --- a/fs/btrfs/delayed-inode.h +++ b/fs/btrfs/delayed-inode.h @@ -119,6 +119,7 @@ void btrfs_kill_delayed_inode_items(struct inode *inode); int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *inode); +int btrfs_fill_inode(struct inode *inode, u32 *rdev); /* Used for drop dead root */ void btrfs_kill_all_delayed_nodes(struct btrfs_root *root); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 87f1e0c..447612d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2509,6 +2509,11 @@ static void btrfs_read_locked_inode(struct inode *inode) int maybe_acls; u32 rdev; int ret; + bool filled = false; + + ret = btrfs_fill_inode(inode, &rdev); + if (!ret) + filled = true; path = btrfs_alloc_path(); BUG_ON(!path); @@ -2520,6 +2525,10 @@ static void btrfs_read_locked_inode(struct inode *inode) goto make_bad; leaf = path->nodes[0]; + + if (filled) + goto cache_acl; + inode_item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_item); if (!leaf->map_token) @@ -2556,7 +2565,7 @@ static void btrfs_read_locked_inode(struct inode *inode) BTRFS_I(inode)->index_cnt = (u64)-1; BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item); - +cache_acl: /* * try to precache a NULL acl entry for files that don't have * any xattrs or acls @@ -2572,7 +2581,6 @@ static void btrfs_read_locked_inode(struct inode *inode) } btrfs_free_path(path); - inode_item = NULL; switch (inode->i_mode & S_IFMT) { case S_IFREG: -- cgit v0.10.2 From 8fcbd4dc7a1b338b393dcd6869deb1725cf1a9f3 Mon Sep 17 00:00:00 2001 From: Evgeni Golov Date: Sun, 12 Jun 2011 05:34:31 -0700 Subject: iwlagn: fix *_UCODE_API_MAX output in the firmware field Currently (3.0-rc2), modinfo iwlagn shows: firmware: iwlwifi-5150-IWL5150_UCODE_API_MAX.ucode firmware: iwlwifi-5000-IWL5000_UCODE_API_MAX.ucode firmware: iwlwifi-6000g2b-IWL6000G2_UCODE_API_MAX.ucode firmware: iwlwifi-6000g2a-IWL6000G2_UCODE_API_MAX.ucode firmware: iwlwifi-6050-IWL6050_UCODE_API_MAX.ucode firmware: iwlwifi-6000-IWL6000_UCODE_API_MAX.ucode firmware: iwlwifi-100-IWL100_UCODE_API_MAX.ucode firmware: iwlwifi-1000-IWL1000_UCODE_API_MAX.ucode firmware: iwlwifi-105-IWL105_UCODE_API_MAX.ucode firmware: iwlwifi-2030-IWL2030_UCODE_API_MAX.ucode firmware: iwlwifi-2000-IWL2000_UCODE_API_MAX.ucode which is obviously wrong, the user should not see the *_UCODE_API_MAX macros but the actual ucode API versions here. The problem are the #define *_MODULE_FIRMWARE(api) *_FW_PRE #api ".ucode" which do not expand api correctly (because this is a macro itself). Fixed by using __stringify() from linux/stringify.h. Further information about macro stringification can be found here: http://gcc.gnu.org/onlinedocs/cpp/Stringification.html Signed-off-by: Evgeni Golov Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 61d4a11..2a88e73 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -55,10 +56,10 @@ #define IWL100_UCODE_API_MIN 5 #define IWL1000_FW_PRE "iwlwifi-1000-" -#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode" +#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE __stringify(api) ".ucode" #define IWL100_FW_PRE "iwlwifi-100-" -#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE #api ".ucode" +#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode" /* diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index 2282279..3df76f5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -58,13 +59,13 @@ #define IWL105_UCODE_API_MIN 5 #define IWL2030_FW_PRE "iwlwifi-2030-" -#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE #api ".ucode" +#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE __stringify(api) ".ucode" #define IWL2000_FW_PRE "iwlwifi-2000-" -#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE #api ".ucode" +#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE __stringify(api) ".ucode" #define IWL105_FW_PRE "iwlwifi-105-" -#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE #api ".ucode" +#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE __stringify(api) ".ucode" static void iwl2000_set_ct_threshold(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index f99f9c1..e816c27 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -57,10 +58,10 @@ #define IWL5150_UCODE_API_MIN 1 #define IWL5000_FW_PRE "iwlwifi-5000-" -#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE #api ".ucode" +#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE __stringify(api) ".ucode" #define IWL5150_FW_PRE "iwlwifi-5150-" -#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE #api ".ucode" +#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode" /* NIC configuration for 5000 series */ static void iwl5000_nic_config(struct iwl_priv *priv) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index fbe565c..5b150bc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -58,16 +59,16 @@ #define IWL6000G2_UCODE_API_MIN 4 #define IWL6000_FW_PRE "iwlwifi-6000-" -#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode" +#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode" #define IWL6050_FW_PRE "iwlwifi-6050-" -#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode" +#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode" #define IWL6005_FW_PRE "iwlwifi-6000g2a-" -#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE #api ".ucode" +#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode" #define IWL6030_FW_PRE "iwlwifi-6000g2b-" -#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE #api ".ucode" +#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode" static void iwl6000_set_ct_threshold(struct iwl_priv *priv) { -- cgit v0.10.2 From a66b98db570a638afd909459e1e6bfa272344bd3 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Thu, 23 Jun 2011 00:00:24 +0300 Subject: mac80211: fix rx->key NULL dereference during mic failure Sometimes when reporting a MIC failure rx->key may be unset. This code path is hit when receiving a packet meant for a multicast address, and decryption is performed in HW. Fortunately, the failing key_idx is not used for anything up to (and including) usermode, so we allow ourselves to drop it on the way up when a key cannot be retrieved. Signed-off-by: Arik Nemtsov Cc: stable@kernel.org Signed-off-by: John W. Linville diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 0589f55..396e8fc 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2688,7 +2688,7 @@ void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf, * @dev: network device * @addr: The source MAC address of the frame * @key_type: The key type that the received frame used - * @key_id: Key identifier (0..3) + * @key_id: Key identifier (0..3). Can be -1 if missing. * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) * @gfp: allocation flags * diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index 9dc3b5f..d91c1a2 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -154,7 +154,13 @@ update_iv: return RX_CONTINUE; mic_fail: - mac80211_ev_michael_mic_failure(rx->sdata, rx->key->conf.keyidx, + /* + * In some cases the key can be unset - e.g. a multicast packet, in + * a driver that supports HW encryption. Send up the key idx only if + * the key is set. + */ + mac80211_ev_michael_mic_failure(rx->sdata, + rx->key ? rx->key->conf.keyidx : -1, (void *) skb->data, NULL, GFP_ATOMIC); return RX_DROP_UNUSABLE; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 98fa8eb..f07602d 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6463,7 +6463,8 @@ void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev, if (addr) NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr); NLA_PUT_U32(msg, NL80211_ATTR_KEY_TYPE, key_type); - NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_id); + if (key_id != -1) + NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_id); if (tsc) NLA_PUT(msg, NL80211_ATTR_KEY_SEQ, 6, tsc); -- cgit v0.10.2 From 8b1ab60c767f33d79894ef66037ef851a7a88fc8 Mon Sep 17 00:00:00 2001 From: Arvid Brodin Date: Fri, 17 Jun 2011 18:45:37 +0200 Subject: usb/isp1760: Fix bug preventing the unlinking of control urbs Both control and bulk transfers use isp1760 slots of type ATL, but the driver unlink code for ATL slots only acts on urbs describing a bulk transfer, letting the code for INT slots take care of the unlink instead, which often ended up removing the interrupt transfer for root hub events instead. That's not good, and gets fixed by this patch. Signed-off-by: Arvid Brodin Cc: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index c9e6e45..55d3d58 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1555,7 +1555,7 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, /* We need to forcefully reclaim the slot since some transfers never return, e.g. interrupt transfers and NAKed bulk transfers. */ - if (usb_pipebulk(urb->pipe)) { + if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) { skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); skip_map |= (1 << qh->slot); reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); -- cgit v0.10.2 From 309427b6351b763917caac3e4b2ab5651df99823 Mon Sep 17 00:00:00 2001 From: Uwe Bonnes Date: Fri, 17 Jun 2011 17:30:23 +0200 Subject: USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1627289..2e06b90 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -179,6 +179,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, @@ -848,7 +849,8 @@ static const char *ftdi_chip_name[] = { [FT2232C] = "FT2232C", [FT232RL] = "FT232RL", [FT2232H] = "FT2232H", - [FT4232H] = "FT4232H" + [FT4232H] = "FT4232H", + [FT232H] = "FT232H" }; @@ -1168,6 +1170,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, break; case FT2232H: /* FT2232H chip */ case FT4232H: /* FT4232H chip */ + case FT232H: /* FT232H chip */ if ((baud <= 12000000) & (baud >= 1200)) { div_value = ftdi_2232h_baud_to_divisor(baud); } else if (baud < 1200) { @@ -1429,9 +1432,12 @@ static void ftdi_determine_type(struct usb_serial_port *port) } else if (version < 0x600) { /* Assume it's an FT232BM (or FT245BM) */ priv->chip_type = FT232BM; - } else { - /* Assume it's an FT232R */ + } else if (version < 0x900) { + /* Assume it's an FT232RL */ priv->chip_type = FT232RL; + } else { + /* Assume it's an FT232H */ + priv->chip_type = FT232H; } dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); } @@ -1559,7 +1565,8 @@ static int create_sysfs_attrs(struct usb_serial_port *port) priv->chip_type == FT2232C || priv->chip_type == FT232RL || priv->chip_type == FT2232H || - priv->chip_type == FT4232H)) { + priv->chip_type == FT4232H || + priv->chip_type == FT232H)) { retval = device_create_file(&port->dev, &dev_attr_latency_timer); } @@ -1580,7 +1587,8 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) priv->chip_type == FT2232C || priv->chip_type == FT232RL || priv->chip_type == FT2232H || - priv->chip_type == FT4232H) { + priv->chip_type == FT4232H || + priv->chip_type == FT232H) { device_remove_file(&port->dev, &dev_attr_latency_timer); } } @@ -2212,6 +2220,7 @@ static int ftdi_tiocmget(struct tty_struct *tty) case FT232RL: case FT2232H: case FT4232H: + case FT232H: len = 2; break; default: diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 213fe3d..19584fa 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -156,7 +156,8 @@ enum ftdi_chip_type { FT2232C = 4, FT232RL = 5, FT2232H = 6, - FT4232H = 7 + FT4232H = 7, + FT232H = 8 }; enum ftdi_sio_baudrate { diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index ab1fcdf..19156d1 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -22,6 +22,7 @@ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */ #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ -- cgit v0.10.2 From c27d5368ef1f7ea40bcd1fb2626f4c99d77e0080 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 20 Jun 2011 17:22:36 +0200 Subject: USB: ehci-ath79: fix a NULL pointer dereference Loading the ehci-hcd module on the ath79 platform causes a NULL pointer dereference: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == c0252928, ra == c00de968 Oops[#1]: Cpu 0 $ 0 : 00000000 00000070 00000001 00000000 $ 4 : 802cf870 0000117e ffffffff 8019c7bc $ 8 : 0000000a 00000002 00000001 fffffffb $12 : 8026ef20 0000000f ffffff80 802dad3c $16 : 8077a2d4 8077a200 c00f3484 8019ed84 $20 : c00f0000 00000003 000000a0 80262c2c $24 : 00000002 80079da0 $28 : 80788000 80789c80 80262b14 c00de968 Hi : 00000000 Lo : b61f0000 epc : c0252928 __mod_vermagic5+0xc260/0xc7e8 [ehci_hcd] Not tainted ra : c00de968 usb_add_hcd+0x2a4/0x858 [usbcore] Status: 1000c003 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ehci_hcd(+) pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filte r ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath mac80211 usbcore nls_base input_polldev crc_ccitt cfg80211 compat input_core a rc4 aes_generic crypto_algapi Process insmod (pid: 379, threadinfo=80788000, task=80ca2180, tls=77fe52d0) Stack : c0253184 80c57d80 80789cac 8077a200 00000001 8019edc0 807fa800 8077a200 8077a290 c00f3484 8019ed84 c00f0000 00000003 000000a0 80262c2c c00de968 802d0000 800878cc c0253228 c02528e4 c0253184 80c57d80 80bf6800 80ca2180 8007b75c 00000000 8077a200 802cf830 802d0000 00000003 fffffff4 00000015 00000348 00000124 800b189c c024bb4c c0255000 801a27e8 c0253228 c02528e4 ... Call Trace: [] __mod_vermagic5+0xc260/0xc7e8 [ehci_hcd] It is caused by: commit c430131a02d677aa708f56342c1565edfdacb3c0 Author: Jan Andersson Date: Tue May 3 20:11:57 2011 +0200 USB: EHCI: Support controllers with big endian capability regs The two first HC capability registers (CAPLENGTH and HCIVERSION) are defined as one 8-bit and one 16-bit register. Most HC implementations have selected to treat these registers as part of a 32-bit register, giving the same layout for both big and small endian systems. This patch adds a new quirk, big_endian_capbase, to support controllers with big endian register interfaces that treat HCIVERSION and CAPLENGTH as individual registers. Signed-off-by: Jan Andersson Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman The reading of the HC capability register has been moved by that commit to a place where the ehci->caps field is not initialized yet. This patch moves the reading of the register back to the original place. Acked-by: Jan Andersson Cc: Alan Stern Signed-off-by: Gabor Juhos Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c index 98cc8a1..aa248c2 100644 --- a/drivers/usb/host/ehci-ath79.c +++ b/drivers/usb/host/ehci-ath79.c @@ -44,7 +44,6 @@ static int ehci_ath79_init(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct platform_device *pdev = to_platform_device(hcd->self.controller); const struct platform_device_id *id; - int hclength; int ret; id = platform_get_device_id(pdev); @@ -53,20 +52,23 @@ static int ehci_ath79_init(struct usb_hcd *hcd) return -EINVAL; } - hclength = HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); switch (id->driver_data) { case EHCI_ATH79_IP_V1: ehci->has_synopsys_hc_bug = 1; ehci->caps = hcd->regs; - ehci->regs = hcd->regs + hclength; + ehci->regs = hcd->regs + + HC_LENGTH(ehci, + ehci_readl(ehci, &ehci->caps->hc_capbase)); break; case EHCI_ATH79_IP_V2: hcd->has_tt = 1; ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + hclength; + ehci->regs = hcd->regs + 0x100 + + HC_LENGTH(ehci, + ehci_readl(ehci, &ehci->caps->hc_capbase)); break; default: -- cgit v0.10.2 From 87abd0a92c72eea71542d6c972c67e39e584e989 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 21 Jun 2011 13:24:42 +0900 Subject: usb: r8a66597-hcd: fix cannot detect low/full speed device This controller can control "Transaction Translators", but the hcd->has_tt is not set. Since the commit d199c96d41d80a567493e12b8e96ea056a1350c1 ("USB: prevent buggy from crashing the USB stack") has checked it, the driver could not work the low/full speed device. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index db6f8b9..4586369 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2517,6 +2517,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) INIT_LIST_HEAD(&r8a66597->child_device); hcd->rsrc_start = res->start; + hcd->has_tt = 1; ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger); if (ret != 0) { -- cgit v0.10.2 From 857aab34f04ff86666aa80e751ee696eff0113dd Mon Sep 17 00:00:00 2001 From: matt mooney Date: Fri, 17 Jun 2011 15:50:46 -0700 Subject: MAINTAINERS: add myself as maintainer of USB/IP Signed-off-by: matt mooney Signed-off-by: Greg Kroah-Hartman diff --git a/MAINTAINERS b/MAINTAINERS index 4307673..1f93f50 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6462,6 +6462,12 @@ S: Maintained F: Documentation/usb/hiddev.txt F: drivers/hid/usbhid/ +USB/IP DRIVERS +M: Matt Mooney +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/staging/usbip/ + USB ISP116X DRIVER M: Olav Kongas L: linux-usb@vger.kernel.org -- cgit v0.10.2 From c6830c22603aaecf65405af23f6da2d55892f9cb Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 16 Jun 2011 17:28:07 +0900 Subject: Fix node_start/end_pfn() definition for mm/page_cgroup.c commit 21a3c96 uses node_start/end_pfn(nid) for detection start/end of nodes. But, it's not defined in linux/mmzone.h but defined in /arch/???/include/mmzone.h which is included only under CONFIG_NEED_MULTIPLE_NODES=y. Then, we see mm/page_cgroup.c: In function 'page_cgroup_init': mm/page_cgroup.c:308: error: implicit declaration of function 'node_start_pfn' mm/page_cgroup.c:309: error: implicit declaration of function 'node_end_pfn' So, fixiing page_cgroup.c is an idea... But node_start_pfn()/node_end_pfn() is a very generic macro and should be implemented in the same manner for all archs. (m32r has different implementation...) This patch removes definitions of node_start/end_pfn() in each archs and defines a unified one in linux/mmzone.h. It's not under CONFIG_NEED_MULTIPLE_NODES, now. A result of macro expansion is here (mm/page_cgroup.c) for !NUMA start_pfn = ((&contig_page_data)->node_start_pfn); end_pfn = ({ pg_data_t *__pgdat = (&contig_page_data); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;}); for NUMA (x86-64) start_pfn = ((node_data[nid])->node_start_pfn); end_pfn = ({ pg_data_t *__pgdat = (node_data[nid]); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;}); Changelog: - fixed to avoid using "nid" twice in node_end_pfn() macro. Reported-and-acked-by: Randy Dunlap Reported-and-tested-by: Ingo Molnar Acked-by: Mel Gorman Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Linus Torvalds diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h index 8af56ce..445dc42 100644 --- a/arch/alpha/include/asm/mmzone.h +++ b/arch/alpha/include/asm/mmzone.h @@ -56,7 +56,6 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n) * Given a kernel address, find the home node of the underlying memory. */ #define kvaddr_to_nid(kaddr) pa_to_nid(__pa(kaddr)) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) /* * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory diff --git a/arch/m32r/include/asm/mmzone.h b/arch/m32r/include/asm/mmzone.h index 9f3b5ac..115ced3 100644 --- a/arch/m32r/include/asm/mmzone.h +++ b/arch/m32r/include/asm/mmzone.h @@ -14,12 +14,6 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) #define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \ -}) #define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) /* @@ -44,7 +38,7 @@ static __inline__ int pfn_to_nid(unsigned long pfn) int node; for (node = 0 ; node < MAX_NUMNODES ; node++) - if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node)) + if (pfn >= node_start_pfn(node) && pfn < node_end_pfn(node)) break; return node; diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index 9608d2c..e67eb9c 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -14,13 +14,6 @@ extern struct node_map_data node_data[]; #define NODE_DATA(nid) (&node_data[nid].pg_data) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \ -}) - /* We have these possible memory map layouts: * Astro: 0-3.75, 67.75-68, 4-64 * zx1: 0-1, 257-260, 4-256 diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h index fd3fd58..7b58917 100644 --- a/arch/powerpc/include/asm/mmzone.h +++ b/arch/powerpc/include/asm/mmzone.h @@ -38,13 +38,6 @@ u64 memory_hotplug_max(void); #define memory_hotplug_max() memblock_end_of_DRAM() #endif -/* - * Following are macros that each numa implmentation must define. - */ - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) - #else #define memory_hotplug_max() memblock_end_of_DRAM() #endif /* CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h index 8887baf..15a8496 100644 --- a/arch/sh/include/asm/mmzone.h +++ b/arch/sh/include/asm/mmzone.h @@ -9,10 +9,6 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ - NODE_DATA(nid)->node_spanned_pages) - static inline int pfn_to_nid(unsigned long pfn) { int nid; diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h index e8c6487..99d9b9f 100644 --- a/arch/sparc/include/asm/mmzone.h +++ b/arch/sparc/include/asm/mmzone.h @@ -8,8 +8,6 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) extern int numa_cpu_lookup_table[]; extern cpumask_t numa_cpumask_lookup_table[]; diff --git a/arch/tile/include/asm/mmzone.h b/arch/tile/include/asm/mmzone.h index c6344c4..9d3dbce 100644 --- a/arch/tile/include/asm/mmzone.h +++ b/arch/tile/include/asm/mmzone.h @@ -40,17 +40,6 @@ static inline int pfn_to_nid(unsigned long pfn) return highbits_to_node[__pfn_to_highbits(pfn)]; } -/* - * Following are macros that each numa implmentation must define. - */ - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \ -}) - #define kern_addr_valid(kaddr) virt_addr_valid((void *)kaddr) static inline int pfn_valid(int pfn) diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 5e83a41..224e8c5 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -48,17 +48,6 @@ static inline int pfn_to_nid(unsigned long pfn) #endif } -/* - * Following are macros that each numa implmentation must define. - */ - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \ -}) - static inline int pfn_valid(int pfn) { int nid = pfn_to_nid(pfn); diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h index b3f88d7..129d9aa 100644 --- a/arch/x86/include/asm/mmzone_64.h +++ b/arch/x86/include/asm/mmzone_64.h @@ -13,8 +13,5 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ - NODE_DATA(nid)->node_spanned_pages) #endif #endif /* _ASM_X86_MMZONE_64_H */ diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index c928dac..9f7c3eb 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -647,6 +647,13 @@ typedef struct pglist_data { #endif #define nid_page_nr(nid, pagenr) pgdat_page_nr(NODE_DATA(nid),(pagenr)) +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) + +#define node_end_pfn(nid) ({\ + pg_data_t *__pgdat = NODE_DATA(nid);\ + __pgdat->node_start_pfn + __pgdat->node_spanned_pages;\ +}) + #include extern struct mutex zonelists_mutex; -- cgit v0.10.2 From 89089158d191ba0195b33ebf35f91ed217d44848 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 Jun 2011 09:28:32 -0700 Subject: Staging: fix more iio builds when IIO_RING_BUFFER is not enabled Fix lots more build errors in staging/iio when CONFIG_IIO_RING_BUFFER is not enabled by moving enums and defines outside of the CONFIG_IIO_RING_BUFFER ifdef block. Examples (one from each driver; there were 116 total errors): drivers/staging/iio/accel/adis16204_core.c:437: error: 'ADIS16204_SCAN_SUPPLY' undeclared here (not in a function) drivers/staging/iio/accel/adis16209_core.c:410: error: 'ADIS16209_SCAN_SUPPLY' undeclared here (not in a function) drivers/staging/iio/gyro/adis16260_core.c:420: error: 'ADIS16260_SCAN_GYRO' undeclared here (not in a function) drivers/staging/iio/imu/adis16400_core.c:565: error: 'ADIS16400_SCAN_SUPPLY' undeclared here (not in a function) Signed-off-by: Randy Dunlap Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h index 5310a42..1690c0d 100644 --- a/drivers/staging/iio/accel/adis16204.h +++ b/drivers/staging/iio/accel/adis16204.h @@ -84,7 +84,6 @@ struct adis16204_state { int adis16204_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER enum adis16204_scan { ADIS16204_SCAN_SUPPLY, ADIS16204_SCAN_ACC_X, @@ -93,6 +92,7 @@ enum adis16204_scan { ADIS16204_SCAN_TEMP, }; +#ifdef CONFIG_IIO_RING_BUFFER void adis16204_remove_trigger(struct iio_dev *indio_dev); int adis16204_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h index 58d08db..3153cbe 100644 --- a/drivers/staging/iio/accel/adis16209.h +++ b/drivers/staging/iio/accel/adis16209.h @@ -121,8 +121,6 @@ struct adis16209_state { int adis16209_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER - #define ADIS16209_SCAN_SUPPLY 0 #define ADIS16209_SCAN_ACC_X 1 #define ADIS16209_SCAN_ACC_Y 2 @@ -132,6 +130,8 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16209_SCAN_INCLI_Y 6 #define ADIS16209_SCAN_ROT 7 +#ifdef CONFIG_IIO_RING_BUFFER + void adis16209_remove_trigger(struct iio_dev *indio_dev); int adis16209_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h index 702dc98..24bf70e 100644 --- a/drivers/staging/iio/gyro/adis16260.h +++ b/drivers/staging/iio/gyro/adis16260.h @@ -104,7 +104,6 @@ struct adis16260_state { int adis16260_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER /* At the moment triggers are only used for ring buffer * filling. This may change! */ @@ -115,6 +114,7 @@ int adis16260_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16260_SCAN_TEMP 3 #define ADIS16260_SCAN_ANGL 4 +#ifdef CONFIG_IIO_RING_BUFFER void adis16260_remove_trigger(struct iio_dev *indio_dev); int adis16260_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h index db184d1..e87715b 100644 --- a/drivers/staging/iio/imu/adis16400.h +++ b/drivers/staging/iio/imu/adis16400.h @@ -158,7 +158,6 @@ struct adis16400_state { int adis16400_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER /* At the moment triggers are only used for ring buffer * filling. This may change! */ @@ -182,6 +181,7 @@ int adis16400_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16300_SCAN_INCLI_X 12 #define ADIS16300_SCAN_INCLI_Y 13 +#ifdef CONFIG_IIO_RING_BUFFER void adis16400_remove_trigger(struct iio_dev *indio_dev); int adis16400_probe_trigger(struct iio_dev *indio_dev); -- cgit v0.10.2 From 6fab3e1fbc83e6d61e8c28ceab513274183a96f6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 23 Jun 2011 12:45:37 +0100 Subject: Staging: Comedi: Build only on arches providing PAGE_KERNEL_NOCACHE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On architectures that don't define PAGE_KERNEL_NOCACHE, the Comedi driver turns into tragedy: CC [M] drivers/staging/comedi/drivers.o drivers/staging/comedi/drivers.c: In function ‘comedi_buf_alloc’: drivers/staging/comedi/drivers.c:505:41: error: ‘PAGE_KERNEL_NOCACHE’ undeclared (first use in this function) drivers/staging/comedi/drivers.c:505:41: note: each undeclared identifier is rep orted only once for each function it appears in make[3]: *** [drivers/staging/comedi/drivers.o] Error 1 Restrict the driver to only those architectures that define PAGE_KERNEL_NOCACHE. PAGE_KERNEL_NOCACHE is a kludge - some system architectures such as SGI IP27 are even uable to offer uncached operation - at least in the way an unwitting driver might assume. I haven't looked in details how the driver is using the area vmaped with PAGE_KERNEL_NOCACHE but maybe doing it XFS-style using cached memory and the flush_kernel_vmap_range / invalidate_kernel_vmap_range APIs in conjunction with the DMA API is a practical alternative. Signed-off-by: Ralf Baechle Reported-by: David Miller Reported-by: Stephen Rothwell Acked-by: Geert Uytterhoeven Cc: Martyn Welch Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 1502d80..bccdc12 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -2,6 +2,7 @@ config COMEDI tristate "Data acquisition support (comedi)" default N depends on m + depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86 ---help--- Enable support a wide range of data acquisition devices for Linux. -- cgit v0.10.2 From fdf2df0e8ce634c9ee5f740a9303e8518ca78932 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 14 Jun 2011 15:00:18 -0700 Subject: Staging: fix iio builds when IIO_RING_BUFFER is not enabled Fix build by moving enum list outside of #ifdef CONFIG_IIO_RING_BUFFER. drivers/staging/iio/accel/adis16201_core.c:413: error: 'ADIS16201_SCAN_SUPPLY' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:417: error: 'ADIS16201_SCAN_TEMP' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:422: error: 'ADIS16201_SCAN_ACC_X' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:427: error: 'ADIS16201_SCAN_ACC_Y' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:432: error: 'ADIS16201_SCAN_AUX_ADC' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:436: error: 'ADIS16201_SCAN_INCLI_X' undeclared here (not in a function) drivers/staging/iio/accel/adis16201_core.c:441: error: 'ADIS16201_SCAN_INCLI_Y' undeclared here (not in a function) vers/staging/iio/accel/adis16203_core.c:374: error: 'ADIS16203_SCAN_SUPPLY' undeclared here (not in a function) drivers/staging/iio/accel/adis16203_core.c:378: error: 'ADIS16203_SCAN_AUX_ADC' undeclared here (not in a function) drivers/staging/iio/accel/adis16203_core.c:382: error: 'ADIS16203_SCAN_INCLI_X' undeclared here (not in a function) drivers/staging/iio/accel/adis16203_core.c:388: error: 'ADIS16203_SCAN_INCLI_Y' undeclared here (not in a function) drivers/staging/iio/accel/adis16203_core.c:392: error: 'ADIS16203_SCAN_TEMP' undeclared here (not in a function) Signed-off-by: Randy Dunlap Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h index 0b9b854..4cc1a5b 100644 --- a/drivers/staging/iio/accel/adis16201.h +++ b/drivers/staging/iio/accel/adis16201.h @@ -81,7 +81,6 @@ struct adis16201_state { int adis16201_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER enum adis16201_scan { ADIS16201_SCAN_SUPPLY, ADIS16201_SCAN_ACC_X, @@ -92,6 +91,7 @@ enum adis16201_scan { ADIS16201_SCAN_INCLI_Y, }; +#ifdef CONFIG_IIO_RING_BUFFER void adis16201_remove_trigger(struct iio_dev *indio_dev); int adis16201_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h index 8bb8ce5..175e21b 100644 --- a/drivers/staging/iio/accel/adis16203.h +++ b/drivers/staging/iio/accel/adis16203.h @@ -76,7 +76,6 @@ struct adis16203_state { int adis16203_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER enum adis16203_scan { ADIS16203_SCAN_SUPPLY, ADIS16203_SCAN_AUX_ADC, @@ -85,6 +84,7 @@ enum adis16203_scan { ADIS16203_SCAN_INCLI_Y, }; +#ifdef CONFIG_IIO_RING_BUFFER void adis16203_remove_trigger(struct iio_dev *indio_dev); int adis16203_probe_trigger(struct iio_dev *indio_dev); -- cgit v0.10.2 From a534bb6eea72c0d082dd2faab85450e5554ba1c8 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 13 Jun 2011 16:39:31 +0300 Subject: Staging: mei: fix suspend failure wait_event_interruptible_timeout return value was wrongly used. The remaining timeout was used as the error code. This fix translated wait_event_interruptible_timeout return value into error code that can be propagated. [10291.674121] pci_pm_suspend(): mei_pci_suspend+0x0/0x8b [mei] returns 2500 It's thinkpad t400 with 00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07) Reported-by: Arkadiusz Miskiewicz Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/mei/init.c b/drivers/staging/mei/init.c index d1ffa32..685fcf6 100644 --- a/drivers/staging/mei/init.c +++ b/drivers/staging/mei/init.c @@ -189,7 +189,7 @@ int mei_hw_init(struct mei_device *dev) mutex_lock(&dev->device_lock); } - if (!err && !dev->recvd_msg) { + if (err <= 0 && !dev->recvd_msg) { dev->mei_state = MEI_DISABLED; dev_dbg(&dev->pdev->dev, "wait_event_interruptible_timeout failed" diff --git a/drivers/staging/mei/wd.c b/drivers/staging/mei/wd.c index 2564b03..fff53d0 100644 --- a/drivers/staging/mei/wd.c +++ b/drivers/staging/mei/wd.c @@ -169,10 +169,15 @@ int mei_wd_stop(struct mei_device *dev, bool preserve) ret = wait_event_interruptible_timeout(dev->wait_stop_wd, dev->wd_stopped, 10 * HZ); mutex_lock(&dev->device_lock); - if (!dev->wd_stopped) - dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n"); - else - dev_dbg(&dev->pdev->dev, "stop wd complete.\n"); + if (dev->wd_stopped) { + dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret); + ret = 0; + } else { + if (!ret) + ret = -ETIMEDOUT; + dev_warn(&dev->pdev->dev, + "stop wd failed to complete ret=%d.\n", ret); + } if (preserve) dev->wd_timeout = wd_timeout; -- cgit v0.10.2 From 928f9111662574c1ac1dfa221c4e502ec713aed9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 31 May 2011 11:37:40 +0200 Subject: Staging: iio: Make IIO depend on GENERIC_HARDIRQS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On m68k (which doesn't support generic hardirqs yet): drivers/staging/iio/industrialio-trigger.c: In function ‘iio_trigger_poll’: drivers/staging/iio/industrialio-trigger.c:180: error: implicit declaration of function ‘generic_handle_irq’ drivers/staging/iio/industrialio-trigger.c: In function ‘iio_trigger_poll_chained’: drivers/staging/iio/industrialio-trigger.c:200: error: implicit declaration of function ‘handle_nested_irq’ drivers/staging/iio/industrialio-trigger.c: In function ‘iio_trig_release’: drivers/staging/iio/industrialio-trigger.c:379: error: implicit declaration of function ‘irq_modify_status’ drivers/staging/iio/industrialio-trigger.c:382: error: implicit declaration of function ‘irq_set_chip’ drivers/staging/iio/industrialio-trigger.c:384: error: implicit declaration of function ‘irq_set_handler’ drivers/staging/iio/industrialio-trigger.c:388: error: implicit declaration of function ‘irq_free_descs’ drivers/staging/iio/industrialio-trigger.c: In function ‘iio_trig_subirqmask’: drivers/staging/iio/industrialio-trigger.c:402: error: implicit declaration of function ‘irq_data_get_irq_chip’ drivers/staging/iio/industrialio-trigger.c:402: warning: initialization makes pointer from integer without a cast drivers/staging/iio/industrialio-trigger.c: In function ‘iio_trig_subirqunmask’: drivers/staging/iio/industrialio-trigger.c:411: warning: initialization makes pointer from integer without a cast drivers/staging/iio/industrialio-trigger.c: In function ‘iio_allocate_trigger’: drivers/staging/iio/industrialio-trigger.c:432: error: implicit declaration of function ‘irq_alloc_descs’ drivers/staging/iio/industrialio-trigger.c:455: error: ‘handle_simple_irq’ undeclared (first use in this function) drivers/staging/iio/industrialio-trigger.c:455: error: (Each undeclared identifier is reported only once drivers/staging/iio/industrialio-trigger.c:455: error: for each function it appears in.) Hence IIO_TRIGGER should depend on GENERIC_HARDIRQS. But as IIO_TRIGGER and IIO_RING_BUFFER form a maze of dependencies and selects, just make the whole IIO subsystem depend on GENERIC_HARDIRQS. This dependency also covers !S390, so that one can be removed again. Signed-off-by: Geert Uytterhoeven Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index f96d5b5..d329635 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -4,7 +4,7 @@ menuconfig IIO tristate "Industrial I/O support" - depends on !S390 + depends on GENERIC_HARDIRQS help The industrial I/O subsystem provides a unified framework for drivers for many different types of embedded sensors using a -- cgit v0.10.2 From 15e5201dfd4eebfce5e50b068ed40cb5f574fee6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 9 Jun 2011 13:16:13 -0700 Subject: Staging: brcm80211: disable drivers for PPC platforms Right now, bad things happen if you try to build these drivers for the PPC platform as it seems that the code only has been tested and built on the MIPS big endian platform. So disable it on the PPC32 and PPC64 platforms for now, hopefully this will be resolved in the future as I'm sure someone will want to use these chips with that platform someday. Reported-by: Stephen Rothwell Cc: Henry Ptasinski Cc: Brett Rudley Cc: Roland Vossen Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/brcm80211/Kconfig b/drivers/staging/brcm80211/Kconfig index f4cf9b2..2d1a29b 100644 --- a/drivers/staging/brcm80211/Kconfig +++ b/drivers/staging/brcm80211/Kconfig @@ -7,6 +7,7 @@ config BRCMSMAC default n depends on PCI depends on WLAN && MAC80211 + depends on !PPC64 && !PPC32 select BRCMUTIL select FW_LOADER select CRC_CCITT @@ -20,6 +21,7 @@ config BRCMFMAC default n depends on MMC depends on WLAN && CFG80211 + depends on !PPC64 && !PPC32 select BRCMUTIL select FW_LOADER select WIRELESS_EXT -- cgit v0.10.2 From d4620396d7e9759dd3f37a8155827477cf2b5309 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 27 Jun 2011 14:34:42 -0700 Subject: Staging: brcm80211: disable drivers except for X86 or MIPS platforms As David points out, the driver is also broken on SPARC, so might as well just only enable it on platforms where people have reported it working, instead of trying to list all of the ones where it doesn't work, as the working platform list is much smaller... Reported-by: David Miller Reported-by: Stephen Rothwell Cc: Henry Ptasinski Cc: Brett Rudley Cc: Roland Vossen Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/brcm80211/Kconfig b/drivers/staging/brcm80211/Kconfig index 2d1a29b..379cf16 100644 --- a/drivers/staging/brcm80211/Kconfig +++ b/drivers/staging/brcm80211/Kconfig @@ -7,7 +7,7 @@ config BRCMSMAC default n depends on PCI depends on WLAN && MAC80211 - depends on !PPC64 && !PPC32 + depends on X86 || MIPS select BRCMUTIL select FW_LOADER select CRC_CCITT @@ -21,7 +21,7 @@ config BRCMFMAC default n depends on MMC depends on WLAN && CFG80211 - depends on !PPC64 && !PPC32 + depends on X86 || MIPS select BRCMUTIL select FW_LOADER select WIRELESS_EXT -- cgit v0.10.2 From a73738e9f85fa6ba3f1f9a6ea95b5e5fa99579a2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 27 Jun 2011 14:43:34 -0700 Subject: Staging: comedi: fix build breakages on some platforms Some platforms do not have virt_to_bus(), so properly depend on CONFIG_VIRT_TO_BUS for the Comedi drivers that need this function. Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index bccdc12..20008a4 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -161,6 +161,7 @@ config COMEDI_PCL730 config COMEDI_PCL812 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink @@ -172,6 +173,7 @@ config COMEDI_PCL812 config COMEDI_PCL816 tristate "Advantech PCL-814 and PCL-816 ISA card support" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-814 and PCL-816 ISA cards @@ -181,6 +183,7 @@ config COMEDI_PCL816 config COMEDI_PCL818 tristate "Advantech PCL-718 and PCL-818 ISA card support" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-818 ISA cards @@ -270,6 +273,7 @@ config COMEDI_DAS800 config COMEDI_DAS1800 tristate "DAS1800 and compatible ISA card support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -341,6 +345,7 @@ config COMEDI_DT2817 config COMEDI_DT282X tristate "Data Translation DT2821 series and DT-EZ ISA card support" select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for Data Translation DT2821 series including DT-EZ @@ -420,6 +425,7 @@ config COMEDI_ADQ12B config COMEDI_NI_AT_A2150 tristate "NI AT-A2150 ISA card support" depends on COMEDI_NI_COMMON + depends on VIRT_TO_BUS default N ---help--- Enable support for National Instruments AT-A2150 cards @@ -537,6 +543,7 @@ if COMEDI_PCI_DRIVERS && PCI config COMEDI_ADDI_APCI_035 tristate "ADDI-DATA APCI_035 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_035 cards @@ -546,6 +553,7 @@ config COMEDI_ADDI_APCI_035 config COMEDI_ADDI_APCI_1032 tristate "ADDI-DATA APCI_1032 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1032 cards @@ -555,6 +563,7 @@ config COMEDI_ADDI_APCI_1032 config COMEDI_ADDI_APCI_1500 tristate "ADDI-DATA APCI_1500 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1500 cards @@ -564,6 +573,7 @@ config COMEDI_ADDI_APCI_1500 config COMEDI_ADDI_APCI_1516 tristate "ADDI-DATA APCI_1516 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1516 cards @@ -573,6 +583,7 @@ config COMEDI_ADDI_APCI_1516 config COMEDI_ADDI_APCI_1564 tristate "ADDI-DATA APCI_1564 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1564 cards @@ -582,6 +593,7 @@ config COMEDI_ADDI_APCI_1564 config COMEDI_ADDI_APCI_16XX tristate "ADDI-DATA APCI_16xx support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_16xx cards @@ -591,6 +603,7 @@ config COMEDI_ADDI_APCI_16XX config COMEDI_ADDI_APCI_2016 tristate "ADDI-DATA APCI_2016 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2016 cards @@ -600,6 +613,7 @@ config COMEDI_ADDI_APCI_2016 config COMEDI_ADDI_APCI_2032 tristate "ADDI-DATA APCI_2032 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2032 cards @@ -609,6 +623,7 @@ config COMEDI_ADDI_APCI_2032 config COMEDI_ADDI_APCI_2200 tristate "ADDI-DATA APCI_2200 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2200 cards @@ -618,6 +633,7 @@ config COMEDI_ADDI_APCI_2200 config COMEDI_ADDI_APCI_3001 tristate "ADDI-DATA APCI_3001 support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -628,6 +644,7 @@ config COMEDI_ADDI_APCI_3001 config COMEDI_ADDI_APCI_3120 tristate "ADDI-DATA APCI_3520 support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -638,6 +655,7 @@ config COMEDI_ADDI_APCI_3120 config COMEDI_ADDI_APCI_3501 tristate "ADDI-DATA APCI_3501 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_3501 cards @@ -647,6 +665,7 @@ config COMEDI_ADDI_APCI_3501 config COMEDI_ADDI_APCI_3XXX tristate "ADDI-DATA APCI_3xxx support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_3xxx cards @@ -713,6 +732,7 @@ config COMEDI_ADL_PCI9111 config COMEDI_ADL_PCI9118 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards @@ -1288,6 +1308,7 @@ config COMEDI_NI_LABPC depends on COMEDI_MITE select COMEDI_8255 select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for National Instruments Lab-PC and compatibles -- cgit v0.10.2 From 5afa9d35782890e8fbd972f12ee5183ba5feb81d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 6 Jun 2011 11:25:19 -0600 Subject: i2c: tegra: Assign unused slave address On Tegra, we should always use the "new" I2C slave controller, to avoid issues with the old controller. This was implemented in commit 65a1a0a "i2c: tegra: Enable new slave mode." There is currently no driver for the Tegra I2C slave controller upstream. Additionally, the controller cannot be completely disabled. Instead, we need to: a) Set I2C_SL_CNFG_NACK to make the controller automatically NACK any incoming transactions. b) The controller's definition of NACK isn't identical to the I2C protocol's definition. Specifically, it will perform a standard NACK, but *also* continue to hold the clock line low in expectation of receiving more data. This can hang the bus, or at least cause transaction timeouts, if something starts a transaction that matches the controller's slave address. Since the default address is 0x00, the general call address, this does occur in practice. To avoid this, we explicitly program a slave address that is reserved for future expansion. For current boards, this guarantees the address will never be used. If a future board ever needs to use this address, we can add platform data to determine a board-specific safe address. 0xfc is picked by this patch. This patch is based on a change previously posted by: Wei Ni http://www.spinics.net/lists/linux-i2c/msg05437.html In turned based on internal changes by: Bharat Nihalani A semantically equivalent change has been contained in the various ChromeOS kernels for a while. I tested this change on top of 3.0-rc2 on Harmony, and interacted with the WM8903 I2C-based audio codec. Signed-off-by: Stephen Warren Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 4d93196..fb3b4f8 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -40,8 +40,10 @@ #define I2C_CNFG_NEW_MASTER_FSM (1<<11) #define I2C_STATUS 0x01C #define I2C_SL_CNFG 0x020 +#define I2C_SL_CNFG_NACK (1<<1) #define I2C_SL_CNFG_NEWSL (1<<2) #define I2C_SL_ADDR1 0x02c +#define I2C_SL_ADDR2 0x030 #define I2C_TX_FIFO 0x050 #define I2C_RX_FIFO 0x054 #define I2C_PACKET_TRANSFER_STATUS 0x058 @@ -337,7 +339,11 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) if (!i2c_dev->is_dvc) { u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG); - i2c_writel(i2c_dev, sl_cfg | I2C_SL_CNFG_NEWSL, I2C_SL_CNFG); + sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL; + i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG); + i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1); + i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2); + } val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT | -- cgit v0.10.2 From 19820510c504d5ba572959c67a72d913afc187a6 Mon Sep 17 00:00:00 2001 From: Huisung Kang Date: Thu, 23 Jun 2011 21:37:33 +0900 Subject: i2c-s3c2410: Fix typo 'i2s' -> 'i2c' Signed-off-by: Huisung Kang Signed-off-by: Kukjin Kim Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 6c00c10..9ad1850 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -248,12 +248,12 @@ static inline int is_msgend(struct s3c24xx_i2c *i2c) return i2c->msg_ptr >= i2c->msg->len; } -/* i2s_s3c_irq_nextbyte +/* i2c_s3c_irq_nextbyte * * process an interrupt and work out what to do */ -static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) +static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) { unsigned long tmp; unsigned char byte; @@ -444,7 +444,7 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id) /* pretty much this leaves us with the fact that we've * transmitted or received whatever byte we last sent */ - i2s_s3c_irq_nextbyte(i2c, status); + i2c_s3c_irq_nextbyte(i2c, status); out: return IRQ_HANDLED; -- cgit v0.10.2 From b90ea76542c53300d39e76f72cf583cd0e0b1f68 Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Thu, 23 Jun 2011 21:37:20 +0900 Subject: i2c-s3c2410: Remove useless break code Signed-off-by: Jonghwan Choi Signed-off-by: Kukjin Kim Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 9ad1850..f84a63c 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -264,7 +264,6 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) case STATE_IDLE: dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__); goto out; - break; case STATE_STOP: dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); -- cgit v0.10.2 From 4a65163e3b2190445c1d94daa21d09c5af604d97 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 23 Jun 2011 17:07:54 -0400 Subject: i2c-bfin-twi: abort transfer is MEM bit is reset unexpectedly Sometimes, the first I2C transmit interrupt is not serviced in time (like when higher priority interrupts take too long). Since the RESTART bit is not set before the next I2C clock, when the TWI handler is finally called, the I2C session is aborted (MEM bit is reset) and both SMITSERV and MCOMP int status bits are set. So when this happens, abort the transfer. Reported-by: Isabelle Leonardi Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 52b545a..cbc98ae 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -193,7 +193,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, return; } if (twi_int_status & MCOMP) { - if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { + if ((read_MASTER_CTL(iface) & MEN) == 0 && + (iface->cur_mode == TWI_I2C_MODE_REPEAT || + iface->cur_mode == TWI_I2C_MODE_COMBINED)) { + iface->result = -1; + write_INT_MASK(iface, 0); + write_MASTER_CTL(iface, 0); + } else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { if (iface->readNum == 0) { /* set the read number to 1 and ask for manual * stop in block combine mode -- cgit v0.10.2 From 4d258b25d947521c8b913154db61ec55198243f8 Mon Sep 17 00:00:00 2001 From: Vitaliy Ivanov Date: Mon, 27 Jun 2011 19:07:08 +0300 Subject: Fix some kernel-doc warnings Fix 'make htmldocs' warnings: Warning(/include/linux/hrtimer.h:153): No description found for parameter 'clockid' Warning(/include/linux/device.h:604): Excess struct/union/enum/typedef member 'of_match' description in 'device' Warning(/include/net/sock.h:349): Excess struct/union/enum/typedef member 'sk_rmem_alloc' description in 'sock' Signed-off-by: Vitaliy Ivanov Acked-by: Grant Likely Acked-by: David S. Miller Signed-off-by: Linus Torvalds diff --git a/include/linux/device.h b/include/linux/device.h index 553fd37..e4f62d8 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -530,7 +530,6 @@ struct device_dma_parameters { * @dma_mem: Internal for coherent mem override. * @archdata: For arch-specific additions. * @of_node: Associated device tree node. - * @of_match: Matching of_device_id from driver. * @devt: For creating the sysfs "dev". * @devres_lock: Spinlock to protect the resource of the device. * @devres_head: The resources list of the device. diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 51932e5..fd0dc30 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -135,6 +135,7 @@ struct hrtimer_sleeper { * @cpu_base: per cpu clock base * @index: clock type index for per_cpu support when moving a * timer to a base on another cpu. + * @clockid: clock id for per_cpu support * @active: red black tree root node for the active timers * @resolution: the resolution of the clock, in nanoseconds * @get_time: function to retrieve the current time of the clock diff --git a/include/net/sock.h b/include/net/sock.h index f2046e4..c0b938c 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -178,7 +178,6 @@ struct sock_common { * @sk_dst_cache: destination cache * @sk_dst_lock: destination cache lock * @sk_policy: flow policy - * @sk_rmem_alloc: receive queue bytes committed * @sk_receive_queue: incoming packets * @sk_wmem_alloc: transmit queue bytes committed * @sk_write_queue: Packet sending queue -- cgit v0.10.2 From 5b8ba10198a109f8a02380648c5d29000caa9c55 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 27 Jun 2011 16:18:01 -0700 Subject: mm: move vmtruncate_range to truncate.c You would expect to find vmtruncate_range() next to vmtruncate() in mm/truncate.c: move it there. Signed-off-by: Hugh Dickins Acked-by: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index 87d9353..40b7531 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2798,30 +2798,6 @@ void unmap_mapping_range(struct address_space *mapping, } EXPORT_SYMBOL(unmap_mapping_range); -int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end) -{ - struct address_space *mapping = inode->i_mapping; - - /* - * If the underlying filesystem is not going to provide - * a way to truncate a range of blocks (punch a hole) - - * we should return failure right now. - */ - if (!inode->i_op->truncate_range) - return -ENOSYS; - - mutex_lock(&inode->i_mutex); - down_write(&inode->i_alloc_sem); - unmap_mapping_range(mapping, offset, (end - offset), 1); - truncate_inode_pages_range(mapping, offset, end); - unmap_mapping_range(mapping, offset, (end - offset), 1); - inode->i_op->truncate_range(inode, offset, end); - up_write(&inode->i_alloc_sem); - mutex_unlock(&inode->i_mutex); - - return 0; -} - /* * We enter with non-exclusive mmap_sem (to exclude vma changes, * but allow concurrent faults), and pte mapped but not yet locked. diff --git a/mm/truncate.c b/mm/truncate.c index 3a29a61..5b4c3a4 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -603,3 +603,27 @@ int vmtruncate(struct inode *inode, loff_t offset) return 0; } EXPORT_SYMBOL(vmtruncate); + +int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end) +{ + struct address_space *mapping = inode->i_mapping; + + /* + * If the underlying filesystem is not going to provide + * a way to truncate a range of blocks (punch a hole) - + * we should return failure right now. + */ + if (!inode->i_op->truncate_range) + return -ENOSYS; + + mutex_lock(&inode->i_mutex); + down_write(&inode->i_alloc_sem); + unmap_mapping_range(mapping, offset, (end - offset), 1); + truncate_inode_pages_range(mapping, offset, end); + unmap_mapping_range(mapping, offset, (end - offset), 1); + inode->i_op->truncate_range(inode, offset, end); + up_write(&inode->i_alloc_sem); + mutex_unlock(&inode->i_mutex); + + return 0; +} -- cgit v0.10.2 From 072441e21ddcd1140606b7d4ef6eab579a86b0b3 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 27 Jun 2011 16:18:02 -0700 Subject: mm: move shmem prototypes to shmem_fs.h Before adding any more global entry points into shmem.c, gather such prototypes into shmem_fs.h. Remove mm's own declarations from swap.h, but for now leave the ones in mm.h: because shmem_file_setup() and shmem_zero_setup() are called from various places, and we should not force other subsystems to update immediately. Signed-off-by: Hugh Dickins Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index 2b7fec8..cae65dc 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -5,6 +5,13 @@ #include #include +struct page; +struct file; +struct inode; +struct super_block; +struct user_struct; +struct vm_area_struct; + /* inode in-kernel data */ #define SHMEM_NR_DIRECT 16 @@ -45,7 +52,17 @@ static inline struct shmem_inode_info *SHMEM_I(struct inode *inode) return container_of(inode, struct shmem_inode_info, vfs_inode); } +/* + * Functions in mm/shmem.c called directly from elsewhere: + */ extern int init_tmpfs(void); extern int shmem_fill_super(struct super_block *sb, void *data, int silent); +extern struct file *shmem_file_setup(const char *name, + loff_t size, unsigned long flags); +extern int shmem_zero_setup(struct vm_area_struct *); +extern int shmem_lock(struct file *file, int lock, struct user_struct *user); +extern int shmem_unuse(swp_entry_t entry, struct page *page); +extern void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff, + struct page **pagep, swp_entry_t *ent); #endif diff --git a/include/linux/swap.h b/include/linux/swap.h index e705646..a273468 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -300,16 +300,6 @@ static inline void scan_unevictable_unregister_node(struct node *node) extern int kswapd_run(int nid); extern void kswapd_stop(int nid); -#ifdef CONFIG_MMU -/* linux/mm/shmem.c */ -extern int shmem_unuse(swp_entry_t entry, struct page *page); -#endif /* CONFIG_MMU */ - -#ifdef CONFIG_CGROUP_MEM_RES_CTLR -extern void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff, - struct page **pagep, swp_entry_t *ent); -#endif - #ifdef CONFIG_SWAP /* linux/mm/page_io.c */ extern int swap_readpage(struct page *); diff --git a/mm/memcontrol.c b/mm/memcontrol.c index cf7d027..ddffc74 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include diff --git a/mm/swapfile.c b/mm/swapfile.c index d537d29..ff8dc1a 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v0.10.2 From 94c1e62df4494b79782cb9c7279f827212d1de70 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 27 Jun 2011 16:18:03 -0700 Subject: tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index cae65dc..22a20af 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -61,6 +61,7 @@ extern struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags); extern int shmem_zero_setup(struct vm_area_struct *); extern int shmem_lock(struct file *file, int lock, struct user_struct *user); +extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end); extern int shmem_unuse(swp_entry_t entry, struct page *page); extern void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff, struct page **pagep, swp_entry_t *ent); diff --git a/mm/shmem.c b/mm/shmem.c index d221a1c..f171475 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -539,7 +539,7 @@ static void shmem_free_pages(struct list_head *next) } while (next); } -static void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end) +void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end) { struct shmem_inode_info *info = SHMEM_I(inode); unsigned long idx; @@ -562,6 +562,8 @@ static void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end) spinlock_t *punch_lock; unsigned long upper_limit; + truncate_inode_pages_range(inode->i_mapping, start, end); + inode->i_ctime = inode->i_mtime = CURRENT_TIME; idx = (start + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; if (idx >= info->next_index) @@ -738,16 +740,8 @@ done2: * lowered next_index. Also, though shmem_getpage checks * i_size before adding to cache, no recheck after: so fix the * narrow window there too. - * - * Recalling truncate_inode_pages_range and unmap_mapping_range - * every time for punch_hole (which never got a chance to clear - * SHMEM_PAGEIN at the start of vmtruncate_range) is expensive, - * yet hardly ever necessary: try to optimize them out later. */ truncate_inode_pages_range(inode->i_mapping, start, end); - if (punch_hole) - unmap_mapping_range(inode->i_mapping, start, - end - start, 1); } spin_lock(&info->lock); @@ -766,22 +760,23 @@ done2: shmem_free_pages(pages_to_free.next); } } +EXPORT_SYMBOL_GPL(shmem_truncate_range); -static int shmem_notify_change(struct dentry *dentry, struct iattr *attr) +static int shmem_setattr(struct dentry *dentry, struct iattr *attr) { struct inode *inode = dentry->d_inode; - loff_t newsize = attr->ia_size; int error; error = inode_change_ok(inode, attr); if (error) return error; - if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE) - && newsize != inode->i_size) { + if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) { + loff_t oldsize = inode->i_size; + loff_t newsize = attr->ia_size; struct page *page = NULL; - if (newsize < inode->i_size) { + if (newsize < oldsize) { /* * If truncating down to a partial page, then * if that page is already allocated, hold it @@ -810,12 +805,19 @@ static int shmem_notify_change(struct dentry *dentry, struct iattr *attr) spin_unlock(&info->lock); } } - - /* XXX(truncate): truncate_setsize should be called last */ - truncate_setsize(inode, newsize); + if (newsize != oldsize) { + i_size_write(inode, newsize); + inode->i_ctime = inode->i_mtime = CURRENT_TIME; + } + if (newsize < oldsize) { + loff_t holebegin = round_up(newsize, PAGE_SIZE); + unmap_mapping_range(inode->i_mapping, holebegin, 0, 1); + shmem_truncate_range(inode, newsize, (loff_t)-1); + /* unmap again to remove racily COWed private pages */ + unmap_mapping_range(inode->i_mapping, holebegin, 0, 1); + } if (page) page_cache_release(page); - shmem_truncate_range(inode, newsize, (loff_t)-1); } setattr_copy(inode, attr); @@ -832,7 +834,6 @@ static void shmem_evict_inode(struct inode *inode) struct shmem_xattr *xattr, *nxattr; if (inode->i_mapping->a_ops == &shmem_aops) { - truncate_inode_pages(inode->i_mapping, 0); shmem_unacct_size(info->flags, inode->i_size); inode->i_size = 0; shmem_truncate_range(inode, 0, (loff_t)-1); @@ -2706,7 +2707,7 @@ static const struct file_operations shmem_file_operations = { }; static const struct inode_operations shmem_inode_operations = { - .setattr = shmem_notify_change, + .setattr = shmem_setattr, .truncate_range = shmem_truncate_range, #ifdef CONFIG_TMPFS_XATTR .setxattr = shmem_setxattr, @@ -2739,7 +2740,7 @@ static const struct inode_operations shmem_dir_inode_operations = { .removexattr = shmem_removexattr, #endif #ifdef CONFIG_TMPFS_POSIX_ACL - .setattr = shmem_notify_change, + .setattr = shmem_setattr, .check_acl = generic_check_acl, #endif }; @@ -2752,7 +2753,7 @@ static const struct inode_operations shmem_special_inode_operations = { .removexattr = shmem_removexattr, #endif #ifdef CONFIG_TMPFS_POSIX_ACL - .setattr = shmem_notify_change, + .setattr = shmem_setattr, .check_acl = generic_check_acl, #endif }; @@ -2908,6 +2909,12 @@ int shmem_lock(struct file *file, int lock, struct user_struct *user) return 0; } +void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end) +{ + truncate_inode_pages_range(inode->i_mapping, start, end); +} +EXPORT_SYMBOL_GPL(shmem_truncate_range); + #ifdef CONFIG_CGROUP_MEM_RES_CTLR /** * mem_cgroup_get_shmem_target - find a page or entry assigned to the shmem file diff --git a/mm/truncate.c b/mm/truncate.c index 5b4c3a4..29a9b8a 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -619,9 +619,9 @@ int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end) mutex_lock(&inode->i_mutex); down_write(&inode->i_alloc_sem); unmap_mapping_range(mapping, offset, (end - offset), 1); - truncate_inode_pages_range(mapping, offset, end); - unmap_mapping_range(mapping, offset, (end - offset), 1); inode->i_op->truncate_range(inode, offset, end); + /* unmap again to remove racily COWed private pages */ + unmap_mapping_range(mapping, offset, (end - offset), 1); up_write(&inode->i_alloc_sem); mutex_unlock(&inode->i_mutex); -- cgit v0.10.2 From d9d90e5eb70e09903dadff42099b6c948f814050 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 27 Jun 2011 16:18:04 -0700 Subject: tmpfs: add shmem_read_mapping_page_gfp Although it is used (by i915) on nothing but tmpfs, read_cache_page_gfp() is unsuited to tmpfs, because it inserts a page into pagecache before calling the filesystem's ->readpage: tmpfs may have pages in swapcache which only it knows how to locate and switch to filecache. At present tmpfs provides a ->readpage method, and copes with this by copying pages; but soon we can simplify it by removing its ->readpage. Provide shmem_read_mapping_page_gfp() now, ready for that transition, Export shmem_read_mapping_page_gfp() and add it to list in shmem_fs.h, with shmem_read_mapping_page() inline for the common mapping_gfp case. (shmem_read_mapping_page_gfp or shmem_read_cache_page_gfp? Generally the read_mapping_page functions use the mapping's ->readpage, and the read_cache_page functions use the supplied filler, so I think read_cache_page_gfp was slightly misnamed.) Signed-off-by: Hugh Dickins Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index 22a20af..aa08fa8 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -3,15 +3,9 @@ #include #include +#include #include -struct page; -struct file; -struct inode; -struct super_block; -struct user_struct; -struct vm_area_struct; - /* inode in-kernel data */ #define SHMEM_NR_DIRECT 16 @@ -61,9 +55,18 @@ extern struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags); extern int shmem_zero_setup(struct vm_area_struct *); extern int shmem_lock(struct file *file, int lock, struct user_struct *user); +extern struct page *shmem_read_mapping_page_gfp(struct address_space *mapping, + pgoff_t index, gfp_t gfp_mask); extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end); extern int shmem_unuse(swp_entry_t entry, struct page *page); extern void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff, struct page **pagep, swp_entry_t *ent); +static inline struct page *shmem_read_mapping_page( + struct address_space *mapping, pgoff_t index) +{ + return shmem_read_mapping_page_gfp(mapping, index, + mapping_gfp_mask(mapping)); +} + #endif diff --git a/mm/shmem.c b/mm/shmem.c index f171475..fcedf54 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -3035,3 +3035,26 @@ int shmem_zero_setup(struct vm_area_struct *vma) vma->vm_flags |= VM_CAN_NONLINEAR; return 0; } + +/** + * shmem_read_mapping_page_gfp - read into page cache, using specified page allocation flags. + * @mapping: the page's address_space + * @index: the page index + * @gfp: the page allocator flags to use if allocating + * + * This behaves as a tmpfs "read_cache_page_gfp(mapping, index, gfp)", + * with any new page allocations done using the specified allocation flags. + * But read_cache_page_gfp() uses the ->readpage() method: which does not + * suit tmpfs, since it may have pages in swapcache, and needs to find those + * for itself; although drivers/gpu/drm i915 and ttm rely upon this support. + * + * Provide a stub for those callers to start using now, then later + * flesh it out to call shmem_getpage() with additional gfp mask, when + * shmem_file_splice_read() is added and shmem_readpage() is removed. + */ +struct page *shmem_read_mapping_page_gfp(struct address_space *mapping, + pgoff_t index, gfp_t gfp) +{ + return read_cache_page_gfp(mapping, index, gfp); +} +EXPORT_SYMBOL_GPL(shmem_read_mapping_page_gfp); -- cgit v0.10.2 From 31c1771cdbf0edea96e109e24dae387d331b6d96 Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Mon, 27 Jun 2011 16:18:04 -0700 Subject: drivers/rtc/rtc-ds1307.c: add support for RTC device pt7c4338 PT7C4338 chip is being manufactured by Pericom Technology Inc. It is a serial real-time clock which provides: 1) Low-power clock/calendar. 2) Programmable square-wave output. It has 56 bytes of nonvolatile RAM. Its register set is same as that of rtc device: DS1307. Signed-off-by: Priyanka Jain Acked-by: Timur Tabi Reviewed-by: Wolfram Sang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 4724ba3..b2005b4 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -149,6 +149,7 @@ static const struct i2c_device_id ds1307_id[] = { { "ds1340", ds_1340 }, { "ds3231", ds_3231 }, { "m41t00", m41t00 }, + { "pt7c4338", ds_1307 }, { "rx8025", rx_8025 }, { } }; -- cgit v0.10.2 From 8c95aa60d2ae3c4e63705ee0f18e155898b09662 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 27 Jun 2011 16:18:05 -0700 Subject: um: add asm/percpu.h To make SLUB work on UML we need this_cpu_cmpxchg from asm-generic/percpu.h. Signed-off-by: Richard Weinberger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/include/asm/percpu.h b/arch/um/include/asm/percpu.h new file mode 100644 index 0000000..efe7508 --- /dev/null +++ b/arch/um/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __UM_PERCPU_H +#define __UM_PERCPU_H + +#include + +#endif /* __UM_PERCPU_H */ -- cgit v0.10.2 From 2b4b2482e70eba10dd98653a3a5ac68126565e24 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Mon, 27 Jun 2011 16:18:06 -0700 Subject: romfs: fix romfs_get_unmapped_area() argument check romfs_get_unmapped_area() checks argument `len' without considering PAGE_ALIGN which will cause do_mmap_pgoff() return -EINVAL error after commit f67d9b1576c ("nommu: add page_align to mmap"). Fix the check by changing it in same way ramfs_nommu_get_unmapped_area() was changed in ramfs/file-nommu.c. Signed-off-by: Bob Liu Cc: David Howells Cc: Paul Mundt Acked-by: Greg Ungerer Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/romfs/mmap-nommu.c b/fs/romfs/mmap-nommu.c index f0511e8..eed9942 100644 --- a/fs/romfs/mmap-nommu.c +++ b/fs/romfs/mmap-nommu.c @@ -27,14 +27,18 @@ static unsigned long romfs_get_unmapped_area(struct file *file, { struct inode *inode = file->f_mapping->host; struct mtd_info *mtd = inode->i_sb->s_mtd; - unsigned long isize, offset; + unsigned long isize, offset, maxpages, lpages; if (!mtd) goto cant_map_directly; + /* the mapping mustn't extend beyond the EOF */ + lpages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; isize = i_size_read(inode); offset = pgoff << PAGE_SHIFT; - if (offset > isize || len > isize || offset > isize - len) + + maxpages = (isize + PAGE_SIZE - 1) >> PAGE_SHIFT; + if ((pgoff >= maxpages) || (maxpages - pgoff < lpages)) return (unsigned long) -EINVAL; /* we need to call down to the MTD layer to do the actual mapping */ -- cgit v0.10.2 From 507c5f1224014f9956e604ee8703b3bbea7da4a4 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 27 Jun 2011 16:18:07 -0700 Subject: include/linux/compat.h: declare compat_sys_sendmmsg() This is required for tilegx to be able to use the compat unistd.h header where compat_sys_sendmmsg() is now mentioned. Signed-off-by: Chris Metcalf Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/compat.h b/include/linux/compat.h index ddcb7db..846bb17 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -467,6 +467,8 @@ asmlinkage long compat_sys_setsockopt(int fd, int level, int optname, char __user *optval, unsigned int optlen); asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned flags); +asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg, + unsigned vlen, unsigned int flags); asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags); asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len, -- cgit v0.10.2 From aa2c96d6f329e66cc59352b0f12e8f04e6a9593b Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Mon, 27 Jun 2011 16:18:08 -0700 Subject: drivers/misc/lkdtm.c: fix race when crashpoint is hit multiple times before checking count We observed the crash point count going negative in cases where the crash point is hit multiple times before the check of "count == 0" is done. Because of this we never call lkdtm_do_action(). This patch just adds a spinlock to protect count. Reported-by: Tapan Dhimant Signed-off-by: Josh Hunt Acked-by: Ankita Garg Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c index 81d7fa4..150cd70 100644 --- a/drivers/misc/lkdtm.c +++ b/drivers/misc/lkdtm.c @@ -120,6 +120,7 @@ static int recur_count = REC_NUM_DEFAULT; static enum cname cpoint = CN_INVALID; static enum ctype cptype = CT_NONE; static int count = DEFAULT_COUNT; +static DEFINE_SPINLOCK(count_lock); module_param(recur_count, int, 0644); MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\ @@ -230,11 +231,14 @@ static const char *cp_name_to_str(enum cname name) static int lkdtm_parse_commandline(void) { int i; + unsigned long flags; if (cpoint_count < 1 || recur_count < 1) return -EINVAL; + spin_lock_irqsave(&count_lock, flags); count = cpoint_count; + spin_unlock_irqrestore(&count_lock, flags); /* No special parameters */ if (!cpoint_type && !cpoint_name) @@ -349,6 +353,9 @@ static void lkdtm_do_action(enum ctype which) static void lkdtm_handler(void) { + unsigned long flags; + + spin_lock_irqsave(&count_lock, flags); count--; printk(KERN_INFO "lkdtm: Crash point %s of type %s hit, trigger in %d rounds\n", cp_name_to_str(cpoint), cp_type_to_str(cptype), count); @@ -357,6 +364,7 @@ static void lkdtm_handler(void) lkdtm_do_action(cptype); count = cpoint_count; } + spin_unlock_irqrestore(&count_lock, flags); } static int lkdtm_register_cpoint(enum cname which) -- cgit v0.10.2 From 9b679320a5fbf46454011e5c62e0b8991b0956d1 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 27 Jun 2011 16:18:09 -0700 Subject: mm/memory-failure.c: fix spinlock vs mutex order We cannot take a mutex while holding a spinlock, so flip the order and fix the locking documentation. Signed-off-by: Peter Zijlstra Acked-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory-failure.c b/mm/memory-failure.c index eac0ba5..740c4f5 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -391,10 +391,11 @@ static void collect_procs_anon(struct page *page, struct list_head *to_kill, struct task_struct *tsk; struct anon_vma *av; - read_lock(&tasklist_lock); av = page_lock_anon_vma(page); if (av == NULL) /* Not actually mapped anymore */ - goto out; + return; + + read_lock(&tasklist_lock); for_each_process (tsk) { struct anon_vma_chain *vmac; @@ -408,9 +409,8 @@ static void collect_procs_anon(struct page *page, struct list_head *to_kill, add_to_kill(tsk, page, vma, to_kill, tkc); } } - page_unlock_anon_vma(av); -out: read_unlock(&tasklist_lock); + page_unlock_anon_vma(av); } /* @@ -424,17 +424,8 @@ static void collect_procs_file(struct page *page, struct list_head *to_kill, struct prio_tree_iter iter; struct address_space *mapping = page->mapping; - /* - * A note on the locking order between the two locks. - * We don't rely on this particular order. - * If you have some other code that needs a different order - * feel free to switch them around. Or add a reverse link - * from mm_struct to task_struct, then this could be all - * done without taking tasklist_lock and looping over all tasks. - */ - - read_lock(&tasklist_lock); mutex_lock(&mapping->i_mmap_mutex); + read_lock(&tasklist_lock); for_each_process(tsk) { pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT); @@ -454,8 +445,8 @@ static void collect_procs_file(struct page *page, struct list_head *to_kill, add_to_kill(tsk, page, vma, to_kill, tkc); } } - mutex_unlock(&mapping->i_mmap_mutex); read_unlock(&tasklist_lock); + mutex_unlock(&mapping->i_mmap_mutex); } /* diff --git a/mm/rmap.c b/mm/rmap.c index 27dfd3b..23295f65 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -38,9 +38,8 @@ * in arch-dependent flush_dcache_mmap_lock, * within inode_wb_list_lock in __sync_single_inode) * - * (code doesn't rely on that order so it could be switched around) - * ->tasklist_lock - * anon_vma->mutex (memory_failure, collect_procs_anon) + * anon_vma->mutex,mapping->i_mutex (memory_failure, collect_procs_anon) + * ->tasklist_lock * pte map lock */ -- cgit v0.10.2 From 08142579b6ca35883c1ed066a2681de6f6917062 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 27 Jun 2011 16:18:10 -0700 Subject: mm: fix assertion mapping->nrpages == 0 in end_writeback() Under heavy memory and filesystem load, users observe the assertion mapping->nrpages == 0 in end_writeback() trigger. This can be caused by page reclaim reclaiming the last page from a mapping in the following race: CPU0 CPU1 ... shrink_page_list() __remove_mapping() __delete_from_page_cache() radix_tree_delete() evict_inode() truncate_inode_pages() truncate_inode_pages_range() pagevec_lookup() - finds nothing end_writeback() mapping->nrpages != 0 -> BUG page->mapping = NULL mapping->nrpages-- Fix the problem by doing a reliable check of mapping->nrpages under mapping->tree_lock in end_writeback(). Analyzed by Jay , lost in LKML, and dug out by Miklos Szeredi . Cc: Jay Cc: Miklos Szeredi Signed-off-by: Jan Kara Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/inode.c b/fs/inode.c index 0f7e88a..43566d1 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -423,7 +423,14 @@ EXPORT_SYMBOL(remove_inode_hash); void end_writeback(struct inode *inode) { might_sleep(); + /* + * We have to cycle tree_lock here because reclaim can be still in the + * process of removing the last page (in __delete_from_page_cache()) + * and we must not free mapping under it. + */ + spin_lock_irq(&inode->i_data.tree_lock); BUG_ON(inode->i_data.nrpages); + spin_unlock_irq(&inode->i_data.tree_lock); BUG_ON(!list_empty(&inode->i_data.private_list)); BUG_ON(!(inode->i_state & I_FREEING)); BUG_ON(inode->i_state & I_CLEAR); diff --git a/include/linux/fs.h b/include/linux/fs.h index 6e73e2e..b5b9792 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -639,6 +639,7 @@ struct address_space { struct prio_tree_root i_mmap; /* tree of private and shared mappings */ struct list_head i_mmap_nonlinear;/*list VM_NONLINEAR mappings */ struct mutex i_mmap_mutex; /* protect tree, count, list */ + /* Protected by tree_lock together with the radix tree */ unsigned long nrpages; /* number of total pages */ pgoff_t writeback_index;/* writeback starts here */ const struct address_space_operations *a_ops; /* methods */ diff --git a/mm/truncate.c b/mm/truncate.c index 29a9b8a..e13f22e 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -304,6 +304,11 @@ EXPORT_SYMBOL(truncate_inode_pages_range); * @lstart: offset from which to truncate * * Called under (and serialised by) inode->i_mutex. + * + * Note: When this function returns, there can be a page in the process of + * deletion (inside __delete_from_page_cache()) in the specified range. Thus + * mapping->nrpages can be non-zero when this function returns even after + * truncation of the whole mapping. */ void truncate_inode_pages(struct address_space *mapping, loff_t lstart) { -- cgit v0.10.2 From 26c4caea9d697043cc5a458b96411b86d7f6babd Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Mon, 27 Jun 2011 16:18:11 -0700 Subject: taskstats: don't allow duplicate entries in listener mode Currently a single process may register exit handlers unlimited times. It may lead to a bloated listeners chain and very slow process terminations. Eg after 10KK sent TASKSTATS_CMD_ATTR_REGISTER_CPUMASKs ~300 Mb of kernel memory is stolen for the handlers chain and "time id" shows 2-7 seconds instead of normal 0.003. It makes it possible to exhaust all kernel memory and to eat much of CPU time by triggerring numerous exits on a single CPU. The patch limits the number of times a single process may register itself on a single CPU to one. One little issue is kept unfixed - as taskstats_exit() is called before exit_files() in do_exit(), the orphaned listener entry (if it was not explicitly deregistered) is kept until the next someone's exit() and implicit deregistration in send_cpu_listeners(). So, if a process registered itself as a listener exits and the next spawned process gets the same pid, it would inherit taskstats attributes. Signed-off-by: Vasiliy Kulikov Cc: Balbir Singh Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/taskstats.c b/kernel/taskstats.c index 9ffea36..fc0f220 100644 --- a/kernel/taskstats.c +++ b/kernel/taskstats.c @@ -285,16 +285,18 @@ ret: static int add_del_listener(pid_t pid, const struct cpumask *mask, int isadd) { struct listener_list *listeners; - struct listener *s, *tmp; + struct listener *s, *tmp, *s2; unsigned int cpu; if (!cpumask_subset(mask, cpu_possible_mask)) return -EINVAL; + s = NULL; if (isadd == REGISTER) { for_each_cpu(cpu, mask) { - s = kmalloc_node(sizeof(struct listener), GFP_KERNEL, - cpu_to_node(cpu)); + if (!s) + s = kmalloc_node(sizeof(struct listener), + GFP_KERNEL, cpu_to_node(cpu)); if (!s) goto cleanup; s->pid = pid; @@ -303,9 +305,16 @@ static int add_del_listener(pid_t pid, const struct cpumask *mask, int isadd) listeners = &per_cpu(listener_array, cpu); down_write(&listeners->sem); + list_for_each_entry_safe(s2, tmp, &listeners->list, list) { + if (s2->pid == pid) + goto next_cpu; + } list_add(&s->list, &listeners->list); + s = NULL; +next_cpu: up_write(&listeners->sem); } + kfree(s); return 0; } -- cgit v0.10.2 From ac34a1a3c39da0a1b9188d12a9ce85506364ed2a Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Mon, 27 Jun 2011 16:18:12 -0700 Subject: memcg: fix direct softlimit reclaim to be called in limit path Commit d149e3b25d7c ("memcg: add the soft_limit reclaim in global direct reclaim") adds a softlimit hook to shrink_zones(). By this, soft limit is called as try_to_free_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() Then, direct reclaim is memcg softlimit hint aware, now. But, the memory cgroup's "limit" path can call softlimit shrinker. try_to_free_mem_cgroup_pages() do_try_to_free_pages() shrink_zones() mem_cgroup_soft_limit_reclaim() This will cause a global reclaim when a memcg hits limit. This is bug. soft_limit_reclaim() should be called when scanning_global_lru(sc) == true. And the commit adds a variable "total_scanned" for counting softlimit scanned pages....it's not "total". This patch removes the variable and update sc->nr_scanned instead of it. This will affect shrink_slab()'s scan condition but, global LRU is scanned by softlimit and I think this change makes sense. TODO: avoid too much scanning of a zone when softlimit did enough work. Signed-off-by: KAMEZAWA Hiroyuki Cc: Daisuke Nishimura Cc: Ying Han Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 8ff834e..4f49535 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1995,14 +1995,13 @@ restart: * If a zone is deemed to be full of pinned pages then just give it a light * scan then give up on it. */ -static unsigned long shrink_zones(int priority, struct zonelist *zonelist, +static void shrink_zones(int priority, struct zonelist *zonelist, struct scan_control *sc) { struct zoneref *z; struct zone *zone; unsigned long nr_soft_reclaimed; unsigned long nr_soft_scanned; - unsigned long total_scanned = 0; for_each_zone_zonelist_nodemask(zone, z, zonelist, gfp_zone(sc->gfp_mask), sc->nodemask) { @@ -2017,19 +2016,23 @@ static unsigned long shrink_zones(int priority, struct zonelist *zonelist, continue; if (zone->all_unreclaimable && priority != DEF_PRIORITY) continue; /* Let kswapd poll it */ + /* + * This steals pages from memory cgroups over softlimit + * and returns the number of reclaimed pages and + * scanned pages. This works for global memory pressure + * and balancing, not for a memcg's limit. + */ + nr_soft_scanned = 0; + nr_soft_reclaimed = mem_cgroup_soft_limit_reclaim(zone, + sc->order, sc->gfp_mask, + &nr_soft_scanned); + sc->nr_reclaimed += nr_soft_reclaimed; + sc->nr_scanned += nr_soft_scanned; + /* need some check for avoid more shrink_zone() */ } - nr_soft_scanned = 0; - nr_soft_reclaimed = mem_cgroup_soft_limit_reclaim(zone, - sc->order, sc->gfp_mask, - &nr_soft_scanned); - sc->nr_reclaimed += nr_soft_reclaimed; - total_scanned += nr_soft_scanned; - shrink_zone(priority, zone, sc); } - - return total_scanned; } static bool zone_reclaimable(struct zone *zone) @@ -2094,7 +2097,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist, sc->nr_scanned = 0; if (!priority) disable_swap_token(sc->mem_cgroup); - total_scanned += shrink_zones(priority, zonelist, sc); + shrink_zones(priority, zonelist, sc); /* * Don't shrink slabs when reclaiming memory from * over limit cgroups -- cgit v0.10.2 From 5286bd953645408634daa880d04c73dd18d0224a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 27 Jun 2011 16:18:13 -0700 Subject: drivers/leds/leds-lp5521.c: fix section mismatches Fix this section mismatch: WARNING: drivers/leds/leds-lp5521.o(.text+0xf2c): Section mismatch in reference from the function lp5521_probe() to the function .init.text:lp5521_init_led() The function lp5521_probe() references the function __init lp5521_init_led(). This is often because lp5521_probe lacks a __init annotation or the annotation of lp5521_init_led is wrong. Fixing this mismatch triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index c0cff64..cc1dc48 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -593,7 +593,7 @@ static void lp5521_unregister_sysfs(struct i2c_client *client) &lp5521_led_attribute_group); } -static int __init lp5521_init_led(struct lp5521_led *led, +static int __devinit lp5521_init_led(struct lp5521_led *led, struct i2c_client *client, int chan, struct lp5521_platform_data *pdata) { @@ -637,7 +637,7 @@ static int __init lp5521_init_led(struct lp5521_led *led, return 0; } -static int lp5521_probe(struct i2c_client *client, +static int __devinit lp5521_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct lp5521_chip *chip; -- cgit v0.10.2 From 33721bd3d00e7a235f70ba4ec19eb64bcd060c0b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 27 Jun 2011 16:18:14 -0700 Subject: drivers/leds/leds-lp5523.c: fix section mismatches Fix this section mismatch: WARNING: drivers/leds/leds-lp5523.o(.text+0x12f4): Section mismatch in reference from the function lp5523_probe() to the function .init.text:lp5523_init_led() The function lp5523_probe() references the function __init lp5523_init_led(). This is often because lp5523_probe lacks a __init annotation or the annotation of lp5523_init_led is wrong. Fixing this one triggers one more mismatch, fix that one as well. Signed-off-by: Ralf Baechle Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index e19fed2..5971e309 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -826,7 +826,7 @@ static int __init lp5523_init_engine(struct lp5523_engine *engine, int id) return 0; } -static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, +static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev, int chan, struct lp5523_platform_data *pdata) { char name[32]; @@ -872,7 +872,7 @@ static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, static struct i2c_driver lp5523_driver; -static int lp5523_probe(struct i2c_client *client, +static int __devinit lp5523_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct lp5523_chip *chip; -- cgit v0.10.2 From 1fc6e987d8f606371337211f52ff74c6753298a6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 27 Jun 2011 16:18:15 -0700 Subject: drivers/misc/ioc4.c: fix section mismatch / race condition Fix this section mismatch: WARNING: drivers/misc/ioc4.o(.data+0x144): Section mismatch in reference from the variable ioc4_load_modules_work to the function .devinit.text:ioc4_load_modules() The variable ioc4_load_modules_work references the function __devinit ioc4_load_modules() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console This one is potentially fatal; by the time ioc4_load_modules is invoked it may already have been freed. For that reason ioc4_load_modules_work can't be turned to __devinitdata but also because it's referenced in ioc4_exit. Signed-off-by: Ralf Baechle Acked-by: Brent Casavant Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c index 668d41e..df03dd3 100644 --- a/drivers/misc/ioc4.c +++ b/drivers/misc/ioc4.c @@ -270,7 +270,7 @@ ioc4_variant(struct ioc4_driver_data *idd) return IOC4_VARIANT_PCI_RT; } -static void __devinit +static void ioc4_load_modules(struct work_struct *work) { request_module("sgiioc4"); -- cgit v0.10.2 From a39bce7bf60e728cb33b6b0415c3f44e7f1a102b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 27 Jun 2011 16:18:16 -0700 Subject: drivers/tty/serial/8250_pci.c: fix warning Fis the warning drivers/tty/serial/8250_pci.c:1457: warning: initialization from incompatible pointer type Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 4b4968a..78e98a5 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -973,7 +973,7 @@ ce4100_serial_setup(struct serial_private *priv, static int pci_omegapci_setup(struct serial_private *priv, - struct pciserial_board *board, + const struct pciserial_board *board, struct uart_port *port, int idx) { return setup_port(priv, port, 2, idx * 8, 0); -- cgit v0.10.2 From 3142b651ad2232cf0e375c291ee4b893c8559df5 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 27 Jun 2011 16:18:17 -0700 Subject: drm/ttm: use shmem_read_mapping_page Soon tmpfs will stop supporting ->readpage and read_mapping_page(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. ttm_tt_swapin() and ttm_tt_swapout() use shmem_read_mapping_page() in place of read_mapping_page(), since their swap_space has been created with shmem_file_setup(). Signed-off-by: Hugh Dickins Cc: Christoph Hellwig Cc: Thomas Hellstrom Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 90e23e0..58c271e 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -484,7 +485,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm) swap_space = swap_storage->f_path.dentry->d_inode->i_mapping; for (i = 0; i < ttm->num_pages; ++i) { - from_page = read_mapping_page(swap_space, i, NULL); + from_page = shmem_read_mapping_page(swap_space, i); if (IS_ERR(from_page)) { ret = PTR_ERR(from_page); goto out_err; @@ -557,7 +558,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage) from_page = ttm->pages[i]; if (unlikely(from_page == NULL)) continue; - to_page = read_mapping_page(swap_space, i, NULL); + to_page = shmem_read_mapping_page(swap_space, i); if (unlikely(IS_ERR(to_page))) { ret = PTR_ERR(to_page); goto out_err; -- cgit v0.10.2 From 5949eac4d9b5bf936c12cb7ec3a09084c1326834 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 27 Jun 2011 16:18:18 -0700 Subject: drm/i915: use shmem_read_mapping_page Soon tmpfs will stop supporting ->readpage and read_cache_page_gfp(): once "tmpfs: add shmem_read_mapping_page_gfp" has been applied, this patch can be applied to ease the transition. Make i915_gem_object_get_pages_gtt() use shmem_read_mapping_page_gfp() in the one place it's needed; elsewhere use shmem_read_mapping_page(), with the mapping's gfp_mask properly initialized. Forget about __GFP_COLD: since tmpfs initializes its pages with memset, asking for a cold page is counter-productive. Include linux/shmem_fs.h also in drm_gem.c: with shmem_file_setup() now declared there too, we shall remove the prototype from linux/mm.h later. Signed-off-by: Hugh Dickins Cc: Christoph Hellwig Cc: Chris Wilson Cc: Keith Packard Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 74e4ff5..4012fe4 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -34,6 +34,7 @@ #include #include #include +#include #include "drmP.h" /** @file drm_gem.c diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index c6389de..fa560ce 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -31,6 +31,7 @@ #include "i915_drv.h" #include "i915_trace.h" #include "intel_drv.h" +#include #include #include #include @@ -359,8 +360,7 @@ i915_gem_shmem_pread_fast(struct drm_device *dev, if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) return PTR_ERR(page); @@ -463,8 +463,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) { ret = PTR_ERR(page); goto out; @@ -797,8 +796,7 @@ i915_gem_shmem_pwrite_fast(struct drm_device *dev, if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) return PTR_ERR(page); @@ -907,8 +905,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) { ret = PTR_ERR(page); goto out; @@ -1558,12 +1555,10 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj, inode = obj->base.filp->f_path.dentry->d_inode; mapping = inode->i_mapping; + gfpmask |= mapping_gfp_mask(mapping); + for (i = 0; i < page_count; i++) { - page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | - __GFP_COLD | - __GFP_RECLAIMABLE | - gfpmask); + page = shmem_read_mapping_page_gfp(mapping, i, gfpmask); if (IS_ERR(page)) goto err_pages; @@ -3565,6 +3560,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj; + struct address_space *mapping; obj = kzalloc(sizeof(*obj), GFP_KERNEL); if (obj == NULL) @@ -3575,6 +3571,9 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, return NULL; } + mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; + mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE); + i915_gem_info_add_obj(dev_priv, size); obj->base.write_domain = I915_GEM_DOMAIN_CPU; @@ -3950,8 +3949,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev, page_count = obj->base.size / PAGE_SIZE; for (i = 0; i < page_count; i++) { - struct page *page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + struct page *page = shmem_read_mapping_page(mapping, i); if (!IS_ERR(page)) { char *dst = kmap_atomic(page); memcpy(dst, vaddr + i*PAGE_SIZE, PAGE_SIZE); @@ -4012,8 +4010,7 @@ i915_gem_attach_phys_object(struct drm_device *dev, struct page *page; char *dst, *src; - page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, i); if (IS_ERR(page)) return PTR_ERR(page); -- cgit v0.10.2 From e2377fe0b65e3c7577ff6df1701c56ef477d336f Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 27 Jun 2011 16:18:19 -0700 Subject: drm/i915: use shmem_truncate_range The interface to ->truncate_range is changing very slightly: once "tmpfs: take control of its truncate_range" has been applied, this can be applied. For now there is only a slight inefficiency while this remains unapplied, but it will soon become essential for managing shmem's use of swap. Change i915_gem_object_truncate() to use shmem_truncate_range() directly: which should also spare i915 later change if we switch from inode_operations->truncate_range to file_operations->fallocate. Signed-off-by: Hugh Dickins Cc: Christoph Hellwig Cc: Chris Wilson Cc: Keith Packard Cc: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index fa560ce..85f7137 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1696,13 +1696,10 @@ i915_gem_object_truncate(struct drm_i915_gem_object *obj) /* Our goal here is to return as much of the memory as * is possible back to the system as we are called from OOM. * To do this we must instruct the shmfs to drop all of its - * backing pages, *now*. Here we mirror the actions taken - * when by shmem_delete_inode() to release the backing store. + * backing pages, *now*. */ inode = obj->base.filp->f_path.dentry->d_inode; - truncate_inode_pages(inode->i_mapping, 0); - if (inode->i_op->truncate_range) - inode->i_op->truncate_range(inode, 0, (loff_t)-1); + shmem_truncate_range(inode, 0, (loff_t)-1); obj->madv = __I915_MADV_PURGED; } -- cgit v0.10.2 From ecbec53b1d00ba582f71b210ed96cafc05ebd189 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 27 Jun 2011 16:18:20 -0700 Subject: drm/i915: more struct_mutex locking When auditing the locking in i915_gem.c (for a prospective change which I then abandoned), I noticed two places where struct_mutex is not held across GEM object manipulations that would usually require it. Since one is in initial setup and the other in driver unload, I'm guessing the mutex is not required for either; but post a patch in case it is. Signed-off-by: Hugh Dickins Cc: Chris Wilson Cc: Keith Packard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 0239e99..2b79588 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -2182,9 +2182,8 @@ int i915_driver_unload(struct drm_device *dev) /* Flush any outstanding unpin_work. */ flush_workqueue(dev_priv->wq); - i915_gem_free_all_phys_object(dev); - mutex_lock(&dev->struct_mutex); + i915_gem_free_all_phys_object(dev); i915_gem_cleanup_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); if (I915_HAS_FBC(dev) && i915_powersave) diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index a670c00..56a8e2a 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -1416,6 +1416,8 @@ void intel_setup_overlay(struct drm_device *dev) goto out_free; overlay->reg_bo = reg_bo; + mutex_lock(&dev->struct_mutex); + if (OVERLAY_NEEDS_PHYSICAL(dev)) { ret = i915_gem_attach_phys_object(dev, reg_bo, I915_GEM_PHYS_OVERLAY_REGS, @@ -1440,6 +1442,8 @@ void intel_setup_overlay(struct drm_device *dev) } } + mutex_unlock(&dev->struct_mutex); + /* init all values */ overlay->color_key = 0x0101fe; overlay->brightness = -19; @@ -1464,6 +1468,7 @@ out_unpin_bo: i915_gem_object_unpin(reg_bo); out_free_bo: drm_gem_object_unreference(®_bo->base); + mutex_unlock(&dev->struct_mutex); out_free: kfree(overlay); return; -- cgit v0.10.2 From b0af8dfdd67699e25083478c63eedef2e72ebd85 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 27 Jun 2011 19:12:22 -0700 Subject: Linux 3.0-rc5 diff --git a/Makefile b/Makefile index 41330a0..dc67046 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 0 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Sneaky Weasel # *DOCUMENTATION* -- cgit v0.10.2 From 33f99dc7fd948bbc808a24a0989c167f8973b643 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 22 Jun 2011 01:04:37 +0000 Subject: ipv4: Fix packet size calculation in __ip_append_data Git commit 59104f06 (ip: take care of last fragment in ip_append_data) added a check to see if we exceed the mtu when we add trailer_len. However, the mtu is already subtracted by the trailer length when the xfrm transfomation bundles are set up. So IPsec packets with mtu size get fragmented, or if the DF bit is set the packets will not be send even though they match the mtu perfectly fine. This patch actually reverts commit 59104f06. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index a8024ea..6b894d4 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -888,12 +888,9 @@ alloc_new_skb: * because we have no idea what fragment will be * the last. */ - if (datalen == length + fraggap) { + if (datalen == length + fraggap) alloclen += rt->dst.trailer_len; - /* make sure mtu is not reached */ - if (datalen > mtu - fragheaderlen - rt->dst.trailer_len) - datalen -= ALIGN(rt->dst.trailer_len, 8); - } + if (transhdrlen) { skb = sock_alloc_send_skb(sk, alloclen + hh_len + 15, -- cgit v0.10.2 From 353e5c9abd900de3d1a40925386ffe4abf76111e Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 22 Jun 2011 01:05:37 +0000 Subject: ipv4: Fix IPsec slowpath fragmentation problem ip_append_data() builds packets based on the mtu from dst_mtu(rt->dst.path). On IPsec the effective mtu is lower because we need to add the protocol headers and trailers later when we do the IPsec transformations. So after the IPsec transformations the packet might be too big, which leads to a slowpath fragmentation then. This patch fixes this by building the packets based on the lower IPsec mtu from dst_mtu(&rt->dst) and adapts the exthdr handling to this. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 6b894d4..4a7e16b 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -802,8 +802,6 @@ static int __ip_append_data(struct sock *sk, skb = skb_peek_tail(queue); exthdrlen = !skb ? rt->dst.header_len : 0; - length += exthdrlen; - transhdrlen += exthdrlen; mtu = cork->fragsize; hh_len = LL_RESERVED_SPACE(rt->dst.dev); @@ -883,6 +881,8 @@ alloc_new_skb: else alloclen = fraglen; + alloclen += exthdrlen; + /* The last fragment gets additional space at tail. * Note, with MSG_MORE we overallocate on fragments, * because we have no idea what fragment will be @@ -923,11 +923,11 @@ alloc_new_skb: /* * Find where to start putting bytes. */ - data = skb_put(skb, fraglen); + data = skb_put(skb, fraglen + exthdrlen); skb_set_network_header(skb, exthdrlen); skb->transport_header = (skb->network_header + fragheaderlen); - data += fragheaderlen; + data += fragheaderlen + exthdrlen; if (fraggap) { skb->csum = skb_copy_and_csum_bits( @@ -1061,7 +1061,7 @@ static int ip_setup_cork(struct sock *sk, struct inet_cork *cork, */ *rtp = NULL; cork->fragsize = inet->pmtudisc == IP_PMTUDISC_PROBE ? - rt->dst.dev->mtu : dst_mtu(rt->dst.path); + rt->dst.dev->mtu : dst_mtu(&rt->dst); cork->dst = &rt->dst; cork->length = 0; cork->tx_flags = ipc->tx_flags; -- cgit v0.10.2 From 4274215d24633df7302069e51426659d4759c5ed Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 28 Jun 2011 16:59:42 +1000 Subject: md: avoid endless recovery loop when waiting for fail device to complete. If a device fails in a way that causes pending request to take a while to complete, md will not be able to immediately remove it from the array in remove_and_add_spares. It will then incorrectly look like a spare device and md will try to recover it even though it is failed. This leads to a recovery process starting and instantly aborting over and over again. We should check if the device is faulty before considering it to be a spare. This will avoid trying to start a recovery that cannot proceed. This bug was introduced in 2.6.26 so that patch is suitable for any kernel since then. Cc: stable@kernel.org Reported-by: Jim Paradis Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 4332fc2..91e31e2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7088,6 +7088,7 @@ static int remove_and_add_spares(mddev_t *mddev) list_for_each_entry(rdev, &mddev->disks, same_set) { if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags) && !test_bit(Blocked, &rdev->flags)) spares++; if (rdev->raid_disk < 0 -- cgit v0.10.2 From 076bad7c4d2c51d9484f0ac60d68838139d2bf72 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 31 May 2011 14:46:55 +0100 Subject: watchdog: Handle multiple wm831x watchdogs being registered Due to the whole single instance based watchdog API we use static data for the wm831x watchdog which means that if the system tries to register a second one we end up trying to register the same miscdevice again, corrupting the miscdevice list. Work around this by checking for duplicate registrations until we get a watchdog core. Signed-off-by: Mark Brown Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c index 8c4b2d5..871caea 100644 --- a/drivers/watchdog/wm831x_wdt.c +++ b/drivers/watchdog/wm831x_wdt.c @@ -320,6 +320,11 @@ static int __devinit wm831x_wdt_probe(struct platform_device *pdev) struct wm831x_watchdog_pdata *pdata; int reg, ret; + if (wm831x) { + dev_err(&pdev->dev, "wm831x watchdog already registered\n"); + return -EBUSY; + } + wm831x = dev_get_drvdata(pdev->dev.parent); ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG); -- cgit v0.10.2 From 9b19d40aa3ebaf1078779da10555da2ab8512422 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 Jun 2011 19:15:23 +0200 Subject: watchdog: mtx1-wdt: request gpio before using it Otherwise, the gpiolib autorequest feature will produce a WARN_ON(): WARNING: at drivers/gpio/gpiolib.c:101 0x8020ec6c() autorequest GPIO-215 [...] Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck Cc: stable diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index 1479dc4..aa011da 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -214,6 +214,12 @@ static int __devinit mtx1_wdt_probe(struct platform_device *pdev) int ret; mtx1_wdt_device.gpio = pdev->resource[0].start; + ret = gpio_request_one(mtx1_wdt_device.gpio, + GPIOF_OUT_INIT_HIGH, "mtx1-wdt"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request gpio"); + return ret; + } spin_lock_init(&mtx1_wdt_device.lock); init_completion(&mtx1_wdt_device.stop); @@ -239,6 +245,8 @@ static int __devexit mtx1_wdt_remove(struct platform_device *pdev) mtx1_wdt_device.queue = 0; wait_for_completion(&mtx1_wdt_device.stop); } + + gpio_free(mtx1_wdt_device.gpio); misc_deregister(&mtx1_wdt_misc); return 0; } -- cgit v0.10.2 From 2ea4e76e997019ae25ac3417aa46e31ddf7ecb17 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 Jun 2011 19:15:41 +0200 Subject: watchdog: mtx1-wdt: fix GPIO toggling Commit e391be76 (MIPS: Alchemy: Clean up GPIO registers and accessors) changed the way the GPIO was toggled. Prior to this patch, we would always actively drive the GPIO output to either 0 or 1, this patch drove the GPIO active to 0, and put the GPIO in tristate to drive it to 1, unfortunately this does not work, revert back to active driving. Using a signed variable (gstate) to hold the gpio state and using a bit- wise operation on it also resulted in toggling value from 1 to -2 since the variable is signed. This value was then passed on to gpio_direction_ output, which always perform a if (value) ... to set the value to the gpio, so we were always writing a 1 to this GPIO instead of 1 -> 0 -> 1 ... Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck Cc: stable diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index aa011da..54aa900 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -66,7 +66,7 @@ static struct { int default_ticks; unsigned long inuse; unsigned gpio; - int gstate; + unsigned int gstate; } mtx1_wdt_device; static void mtx1_wdt_trigger(unsigned long unused) @@ -78,11 +78,8 @@ static void mtx1_wdt_trigger(unsigned long unused) ticks--; /* toggle wdt gpio */ - mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate; - if (mtx1_wdt_device.gstate) - gpio_direction_output(mtx1_wdt_device.gpio, 1); - else - gpio_direction_input(mtx1_wdt_device.gpio); + mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate; + gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate); if (mtx1_wdt_device.queue && ticks) mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); @@ -105,7 +102,7 @@ static void mtx1_wdt_start(void) if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; mtx1_wdt_device.gstate = 1; - gpio_direction_output(mtx1_wdt_device.gpio, 1); + gpio_set_value(mtx1_wdt_device.gpio, 1); mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); } mtx1_wdt_device.running++; @@ -120,7 +117,7 @@ static int mtx1_wdt_stop(void) if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; mtx1_wdt_device.gstate = 0; - gpio_direction_output(mtx1_wdt_device.gpio, 0); + gpio_set_value(mtx1_wdt_device.gpio, 0); } ticks = mtx1_wdt_device.default_ticks; spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); -- cgit v0.10.2 From db98f89a2807966c6e82601f5c57e1a9c214c91a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 Jun 2011 19:15:52 +0200 Subject: watchdog: mtx1-wdt: fix section mismatch Fix section mismatch and remove unused variable 'tmp'. Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index 54aa900..0430e09 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -71,8 +71,6 @@ static struct { static void mtx1_wdt_trigger(unsigned long unused) { - u32 tmp; - spin_lock(&mtx1_wdt_device.lock); if (mtx1_wdt_device.running) ticks--; @@ -248,7 +246,7 @@ static int __devexit mtx1_wdt_remove(struct platform_device *pdev) return 0; } -static struct platform_driver mtx1_wdt = { +static struct platform_driver mtx1_wdt_driver = { .probe = mtx1_wdt_probe, .remove = __devexit_p(mtx1_wdt_remove), .driver.name = "mtx1-wdt", @@ -257,12 +255,12 @@ static struct platform_driver mtx1_wdt = { static int __init mtx1_wdt_init(void) { - return platform_driver_register(&mtx1_wdt); + return platform_driver_register(&mtx1_wdt_driver); } static void __exit mtx1_wdt_exit(void) { - platform_driver_unregister(&mtx1_wdt); + platform_driver_unregister(&mtx1_wdt_driver); } module_init(mtx1_wdt_init); -- cgit v0.10.2 From e376fd664b1547e29e264e3cfb97553a1be9054b Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 26 May 2011 11:12:53 +0200 Subject: watchdog: Intel SCU Watchdog: Fix build and remove duplicate code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Trying to build the Intel SCU Watchdog fails for me with gcc 4.6.0 - $ gcc --version | head -n 1 gcc (GCC) 4.6.0 20110513 (prerelease) like this : CC drivers/watchdog/intel_scu_watchdog.o In file included from drivers/watchdog/intel_scu_watchdog.c:49:0: /home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h: In function ‘apbt_time_init’: /home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h:65:42: warning: ‘return’ with a value, in function returning void [enabled by default] drivers/watchdog/intel_scu_watchdog.c: In function ‘intel_scu_watchdog_init’: drivers/watchdog/intel_scu_watchdog.c:468:2: error: implicit declaration of function ‘sfi_get_mtmr’ [-Werror=implicit-function-declaration] drivers/watchdog/intel_scu_watchdog.c:468:32: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors make[1]: *** [drivers/watchdog/intel_scu_watchdog.o] Error 1 make: *** [drivers/watchdog/intel_scu_watchdog.o] Error 2 Additionally, linux/types.h is needlessly being included twice in drivers/watchdog/intel_scu_watchdog.c Signed-off-by: Jesper Juhl Signed-off-by: Wim Van Sebroeck diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h index 2fefa50..af60d8a 100644 --- a/arch/x86/include/asm/apb_timer.h +++ b/arch/x86/include/asm/apb_timer.h @@ -62,7 +62,7 @@ extern int sfi_mtimer_num; #else /* CONFIG_APB_TIMER */ static inline unsigned long apbt_quick_calibrate(void) {return 0; } -static inline void apbt_time_init(void) {return 0; } +static inline void apbt_time_init(void) { } #endif #endif /* ASM_X86_APBT_H */ diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 022f9eb..9536d38 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -535,8 +535,7 @@ config I6300ESB_WDT config INTEL_SCU_WATCHDOG bool "Intel SCU Watchdog for Mobile Platforms" - depends on WATCHDOG - depends on INTEL_SCU_IPC + depends on X86_MRST ---help--- Hardware driver for the watchdog time built into the Intel SCU for Intel Mobile Platforms. diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c index 919bdd1..ba43860 100644 --- a/drivers/watchdog/intel_scu_watchdog.c +++ b/drivers/watchdog/intel_scu_watchdog.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From ae2a00607463ceb647ada550d7f34ba33177ef38 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 27 Jun 2011 22:37:16 +0800 Subject: watchdog: gef_wdt: fix MODULE_ALIAS Remove the space between "platform:" prefix and the driver name. Signed-off-by: Axel Lin Acked-by: Martyn Welch Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c index 29a7cd4..b146082 100644 --- a/drivers/watchdog/gef_wdt.c +++ b/drivers/watchdog/gef_wdt.c @@ -329,4 +329,4 @@ MODULE_AUTHOR("Martyn Welch "); MODULE_DESCRIPTION("GE watchdog driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS("platform: gef_wdt"); +MODULE_ALIAS("platform:gef_wdt"); -- cgit v0.10.2 From b6fcd313c9db4f4c4feaf9d5d48b293d5fa27061 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 10:32:05 +0100 Subject: ARM: entry: remove unused irq_prio_table macro Platforms provide an empty irq_prio_table macro, and as nothing uses this macro, it can simply be removed. Signed-off-by: Russell King diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S index 7d393ca..94c950d 100644 --- a/arch/arm/mach-bcmring/include/mach/entry-macro.S +++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S @@ -80,7 +80,3 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro irq_prio_table - .endm - diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index fbdebc7..e14c0dc 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -46,6 +46,3 @@ #endif 1002: .endm - - .macro irq_prio_table - .endm diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S index 6d3b917..c3948e5 100644 --- a/arch/arm/mach-h720x/include/mach/entry-macro.S +++ b/arch/arm/mach-h720x/include/mach/entry-macro.S @@ -57,9 +57,6 @@ tst \irqstat, #1 @ bit 0 should be set .endm - .macro irq_prio_table - .endm - #else #error hynix processor selection missmatch #endif diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S index 870227c..b725f6c 100644 --- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S @@ -41,7 +41,3 @@ rsb \irqnr, \irqnr, #31 teq \irqstat, #0 .endm - - .macro irq_prio_table - .endm - diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index a48690b..ceb8b7e 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -165,6 +165,3 @@ #endif #endif /* MULTI_OMAP2 */ - - .macro irq_prio_table - .endm diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S index 8003037..db7eeeb 100644 --- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S @@ -120,8 +120,3 @@ 1003: .endm - - .macro irq_prio_table - .endm - - diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 2e49e71..066d464 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -78,7 +78,3 @@ movs \irqnr, \irqnr #endif .endm - - @ irq priority table (not used) - .macro irq_prio_table - .endm -- cgit v0.10.2 From 2342aa282b59f028cf0850b483b34587db2c22b0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 10:04:15 +0100 Subject: ARM: entry: shark: don't directly reference registers in macros Directly referencing registers in macros makes assembly code harder to change, because the macros have side effects which are non-obvious. Use the provided 'base' register rather than directly referencing r4. Signed-off-by: Russell King diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S index e2853c0..0bb6cc6 100644 --- a/arch/arm/mach-shark/include/mach/entry-macro.S +++ b/arch/arm/mach-shark/include/mach/entry-macro.S @@ -11,17 +11,17 @@ .endm .macro get_irqnr_preamble, base, tmp + mov \base, #0xe0000000 .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #0xe0000000 mov \irqstat, #0x0C - strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */ - ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7 + strb \irqstat, [\base, #0x20] @outb(0x0C, 0x20) /* Poll command */ + ldrb \irqnr, [\base, #0x20] @irq = inb(0x20) & 7 and \irqstat, \irqnr, #0x80 teq \irqstat, #0 beq 43f @@ -29,8 +29,8 @@ teq \irqnr, #2 bne 44f 43: mov \irqstat, #0x0C - strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ - ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8 + strb \irqstat, [\base, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ + ldrb \irqnr, [\base, #0xa0] @irq = (inb(0xA0) & 7) + 8 and \irqstat, \irqnr, #0x80 teq \irqstat, #0 beq 44f -- cgit v0.10.2 From f0ca89b031d327b80b612a0608d31b8e13e6dc33 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 21 Jun 2011 20:51:34 +0200 Subject: ALSA: HDA: Add a new Conexant codec ID (506c) Conexant ID 506c was found on Acer Aspire 3830TG. As users report no playback, sending to stable should be safe. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/783582 Reported-by: andROOM Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 694b9daf..4158949 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -4389,6 +4389,8 @@ static const struct hda_codec_preset snd_hda_preset_conexant[] = { .patch = patch_cxt5066 }, { .id = 0x14f15069, .name = "CX20585", .patch = patch_cxt5066 }, + { .id = 0x14f1506c, .name = "CX20588", + .patch = patch_cxt5066 }, { .id = 0x14f1506e, .name = "CX20590", .patch = patch_cxt5066 }, { .id = 0x14f15097, .name = "CX20631", @@ -4417,6 +4419,7 @@ MODULE_ALIAS("snd-hda-codec-id:14f15066"); MODULE_ALIAS("snd-hda-codec-id:14f15067"); MODULE_ALIAS("snd-hda-codec-id:14f15068"); MODULE_ALIAS("snd-hda-codec-id:14f15069"); +MODULE_ALIAS("snd-hda-codec-id:14f1506c"); MODULE_ALIAS("snd-hda-codec-id:14f1506e"); MODULE_ALIAS("snd-hda-codec-id:14f15097"); MODULE_ALIAS("snd-hda-codec-id:14f15098"); -- cgit v0.10.2 From 9966db22caf8f74c0e6d84a569e6d7d56332e127 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Tue, 21 Jun 2011 21:01:52 +0200 Subject: ALSA: HDA: Add model=auto quirk for Acer Aspire 3830TG Since we're not using the new auto parser as a fallback yet, add it manually as a quirk. Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 4158949..7bbc5f2 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3074,6 +3074,7 @@ static const char * const cxt5066_models[CXT5066_MODELS] = { }; static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { + SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT5066_AUTO), SND_PCI_QUIRK_MASK(0x1025, 0xff00, 0x0400, "Acer", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD), -- cgit v0.10.2 From 0cfae7c9378cf77434f6be89b5fb65d8f9a5031f Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Tue, 28 Jun 2011 16:59:14 +0200 Subject: ALSA: atmel - update author email for ABDAC, AC97C and AT73C213 This patch updates the email address of the sound drivers supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Takashi Iwai diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index 6e24091..bfee60c 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -599,4 +599,4 @@ module_exit(atmel_abdac_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Driver for Atmel Audio Bitstream DAC (ABDAC)"); -MODULE_AUTHOR("Hans-Christian Egtvedt "); +MODULE_AUTHOR("Hans-Christian Egtvedt "); diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index b310702..ac35222 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -1199,4 +1199,4 @@ module_exit(atmel_ac97c_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Driver for Atmel AC97 controller"); -MODULE_AUTHOR("Hans-Christian Egtvedt "); +MODULE_AUTHOR("Hans-Christian Egtvedt "); diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 337a002..4dd051b 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -1124,6 +1124,6 @@ static void __exit at73c213_exit(void) } module_exit(at73c213_exit); -MODULE_AUTHOR("Hans-Christian Egtvedt "); +MODULE_AUTHOR("Hans-Christian Egtvedt "); MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 5ee0a58d8ca443e80ed8712c86c9938360b79cac Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 27 Jun 2011 15:38:05 -0400 Subject: iwlagn: use PCI_DMA_* for pci_* operations "iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA directions, even though the pci_* DMA API is still in use. That patch was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers for DMA operation", which is due in the next release. Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 4707431..137dba9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -126,7 +126,7 @@ static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd) } static void iwlagn_unmap_tfd(struct iwl_priv *priv, struct iwl_cmd_meta *meta, - struct iwl_tfd *tfd, enum dma_data_direction dma_dir) + struct iwl_tfd *tfd, int dma_dir) { struct pci_dev *dev = priv->pci_dev; int i; @@ -168,7 +168,7 @@ void iwlagn_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) int index = txq->q.read_ptr; iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index], - DMA_TO_DEVICE); + PCI_DMA_TODEVICE); /* free SKB */ if (txq->txb) { @@ -312,7 +312,7 @@ void iwl_cmd_queue_unmap(struct iwl_priv *priv) if (txq->meta[i].flags & CMD_MAPPED) { iwlagn_unmap_tfd(priv, &txq->meta[i], &txq->tfds[i], - DMA_BIDIRECTIONAL); + PCI_DMA_BIDIRECTIONAL); txq->meta[i].flags = 0; } @@ -694,11 +694,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) if (!(cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY)) continue; phys_addr = pci_map_single(priv->pci_dev, (void *)cmd->data[i], - cmd->len[i], DMA_BIDIRECTIONAL); + cmd->len[i], PCI_DMA_BIDIRECTIONAL); if (pci_dma_mapping_error(priv->pci_dev, phys_addr)) { iwlagn_unmap_tfd(priv, out_meta, &txq->tfds[q->write_ptr], - DMA_BIDIRECTIONAL); + PCI_DMA_BIDIRECTIONAL); idx = -ENOMEM; goto out; } @@ -802,7 +802,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) cmd = txq->cmd[cmd_index]; meta = &txq->meta[cmd_index]; - iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], DMA_BIDIRECTIONAL); + iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], PCI_DMA_BIDIRECTIONAL); /* Input error checking is done when commands are added to queue. */ if (meta->flags & CMD_WANT_SKB) { -- cgit v0.10.2 From 1d1221f375c94ef961ba8574ac4f85c8870ddd51 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 24 Jun 2011 16:08:38 +0400 Subject: proc: restrict access to /proc/PID/io /proc/PID/io may be used for gathering private information. E.g. for openssh and vsftpd daemons wchars/rchars may be used to learn the precise password length. Restrict it to processes being able to ptrace the target process. ptrace_may_access() is needed to prevent keeping open file descriptor of "io" file, executing setuid binary and gathering io information of the setuid'ed process. Signed-off-by: Vasiliy Kulikov Signed-off-by: Linus Torvalds diff --git a/fs/proc/base.c b/fs/proc/base.c index 8a84210..fc5bc27 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2708,6 +2708,9 @@ static int do_io_accounting(struct task_struct *task, char *buffer, int whole) struct task_io_accounting acct = task->ioac; unsigned long flags; + if (!ptrace_may_access(task, PTRACE_MODE_READ)) + return -EACCES; + if (whole && lock_task_sighand(task, &flags)) { struct task_struct *t = task; @@ -2839,7 +2842,7 @@ static const struct pid_entry tgid_base_stuff[] = { REG("coredump_filter", S_IRUGO|S_IWUSR, proc_coredump_filter_operations), #endif #ifdef CONFIG_TASK_IO_ACCOUNTING - INF("io", S_IRUGO, proc_tgid_io_accounting), + INF("io", S_IRUSR, proc_tgid_io_accounting), #endif #ifdef CONFIG_HARDWALL INF("hardwall", S_IRUGO, proc_pid_hardwall), @@ -3181,7 +3184,7 @@ static const struct pid_entry tid_base_stuff[] = { REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations), #endif #ifdef CONFIG_TASK_IO_ACCOUNTING - INF("io", S_IRUGO, proc_tid_io_accounting), + INF("io", S_IRUSR, proc_tid_io_accounting), #endif #ifdef CONFIG_HARDWALL INF("hardwall", S_IRUGO, proc_pid_hardwall), -- cgit v0.10.2 From 25732821cb965f00475922ca46e84f78e4bada95 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Fri, 24 Jun 2011 14:31:47 -0700 Subject: drm/i915: forcewake fix after reset The failure is as follows: 1. Userspace gets forcewake lock, lock count >=1 2. GPU hang/reset occurs (forcewake bit is reset) 3. count is now incorrect The failure can only occur when using the forcewake userspace lock. This has the unfortunate consequence of messing up the driver as well as userspace, unless userspace closes the debugfs file, the kernel will never end up waking the GT since the refcount will be > 1. The solution is to try to recover the correct forcewake state based on the refcount. There is a period of time where userspace reads/writes may occur after the reset, before the GT has been forcewaked. The interface was never designed to be a perfect solution for userspace reads/writes, and the kernel portion is fixed by this patch. Suggested-by: Chris Wilson Signed-off-by: Ben Widawsky Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 0defd42..609358f 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -579,6 +579,9 @@ int i915_reset(struct drm_device *dev, u8 flags) } else switch (INTEL_INFO(dev)->gen) { case 6: ret = gen6_do_reset(dev, flags); + /* If reset with a user forcewake, try to restore */ + if (atomic_read(&dev_priv->forcewake_count)) + __gen6_gt_force_wake_get(dev_priv); break; case 5: ret = ironlake_do_reset(dev, flags); -- cgit v0.10.2 From f01c22fd59aa10a3738ede20fd4b9b6fd1e2eac3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 28 Jun 2011 11:48:51 +0100 Subject: drm/i915: Use chipset-specific irq installers Konstantin Belousov pointed out that 4697995b98417 replaced the generic i915_driver_irq_*install() functions with chipset specific routines accessible only through driver->irq_*install(). So update the sanity check in i915_request_wait() to match. Signed-off-by: Chris Wilson Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index c6389de..e81dbe5 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2080,8 +2080,8 @@ i915_wait_request(struct intel_ring_buffer *ring, if (!ier) { DRM_ERROR("something (likely vbetool) disabled " "interrupts, re-enabling\n"); - i915_driver_irq_preinstall(ring->dev); - i915_driver_irq_postinstall(ring->dev); + ring->dev->driver->irq_preinstall(ring->dev); + ring->dev->driver->irq_postinstall(ring->dev); } trace_i915_gem_request_wait_begin(ring, seqno); -- cgit v0.10.2 From 7ac28817536797fd40e9646452183606f9e17f71 Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Fri, 24 Jun 2011 08:38:05 -0400 Subject: Bluetooth: Prevent buffer overflow in l2cap config request A remote user can provide a small value for the command size field in the command header of an l2cap configuration request, resulting in an integer underflow when subtracting the size of the configuration request header. This results in copying a very large amount of data via memcpy() and destroying the kernel heap. Check for underflow. Signed-off-by: Dan Rosenberg Cc: stable Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 56fdd91..7d8a66b 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -2334,7 +2334,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr /* Reject if config buffer is too small. */ len = cmd_len - sizeof(*req); - if (chan->conf_len + len > sizeof(chan->conf_req)) { + if (len < 0 || chan->conf_len + len > sizeof(chan->conf_req)) { l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, l2cap_build_conf_rsp(chan, rsp, L2CAP_CONF_REJECT, flags), rsp); -- cgit v0.10.2 From 2bea038c52e88badbbd5b420c1de918f7f2579e9 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 16 Jun 2011 11:35:46 -0400 Subject: pnfs: write: Set mds_offset in the generic layer - it is needed by all LDs In current pnfs tree, all the layouts set mds_offset in their .write_pagelist member. mds_offset is only used by generic layer and should be handled by it. This patch is for upstream. It is needed in this -rc series to fix a bug in objects layout_commit. I'll send patches for objects and blocks to be squashed into current pnfs tree. TODO: It looks like the read path needs the same patch. Signed-off-by: Boaz Harrosh Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 0bafcc9..f9d03ab 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -398,7 +398,6 @@ filelayout_write_pagelist(struct nfs_write_data *data, int sync) * this offset and save the original offset. */ data->args.offset = filelayout_get_dserver_offset(lseg, offset); - data->mds_offset = offset; /* Perform an asynchronous write */ status = nfs_initiate_write(data, ds->ds_clp->cl_rpcclient, diff --git a/fs/nfs/write.c b/fs/nfs/write.c index e268e3b..7271680 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -864,6 +864,8 @@ static int nfs_write_rpcsetup(struct nfs_page *req, data->args.fh = NFS_FH(inode); data->args.offset = req_offset(req) + offset; + /* pnfs_set_layoutcommit needs this */ + data->mds_offset = data->args.offset; data->args.pgbase = req->wb_pgbase + offset; data->args.pages = data->pagevec; data->args.count = count; -- cgit v0.10.2 From aeb0aea143e958d5218162d73b1ed4d6ff0ed7c4 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Tue, 28 Jun 2011 17:01:14 +0200 Subject: watchdog: update author email for at32ap700x_wdt This patch updates the email address of the at32ap700x_wdt driver supported by me to an email account I will use on a more regular basis in the future. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 750bc52..4ca5d40 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -448,7 +448,7 @@ static void __exit at32_wdt_exit(void) } module_exit(at32_wdt_exit); -MODULE_AUTHOR("Hans-Christian Egtvedt "); +MODULE_AUTHOR("Hans-Christian Egtvedt "); MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v0.10.2 From 937c190ccdd29855828529fc2b4b3e5f1282ff23 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 27 Jun 2011 19:55:30 +0000 Subject: powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfig Remove duplicate assignment of SCSI_BNX2_ISCSI in pseries_defconfig introduced by: 37e0c21e powerpc/pseries: Enable iSCSI support for a number of cards causes warning: arch/powerpc/configs/pseries_defconfig:151:warning: override: reassigning to symbol SCSI_BNX2_ISCSI Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index c9f212b..80bc5de 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -148,7 +148,6 @@ CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m CONFIG_BE2ISCSI=m CONFIG_SCSI_IBMVSCSI=y CONFIG_SCSI_IBMVFC=m -- cgit v0.10.2 From 9a8f99fab02db296815d7f0ae8ba8ce169df0063 Mon Sep 17 00:00:00 2001 From: Christian Dietrich Date: Sat, 4 Jun 2011 05:35:47 +0000 Subject: powerpc/rtas-rtc: remove sideeffects of printk_ratelimit Don't use printk_ratelimit() as an additional condition for returning on an error. Because when the ratelimit is reached, printk_ratelimit will return 0 and e.g. in rtas_get_boot_time won't check for an error condition. Signed-off-by: Christian Dietrich Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 77578c0..c57c193 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -29,9 +30,10 @@ unsigned long __init rtas_get_boot_time(void) } } while (wait_time && (get_tb() < max_wait_tb)); - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); + if (error != 0) { + printk_ratelimited(KERN_WARNING + "error: reading the clock failed (%d)\n", + error); return 0; } @@ -55,19 +57,21 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) wait_time = rtas_busy_delay_time(error); if (wait_time) { - if (in_interrupt() && printk_ratelimit()) { + if (in_interrupt()) { memset(rtc_tm, 0, sizeof(struct rtc_time)); - printk(KERN_WARNING "error: reading clock" - " would delay interrupt\n"); + printk_ratelimited(KERN_WARNING + "error: reading clock " + "would delay interrupt\n"); return; /* delay not allowed */ } msleep(wait_time); } } while (wait_time && (get_tb() < max_wait_tb)); - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); + if (error != 0) { + printk_ratelimited(KERN_WARNING + "error: reading the clock failed (%d)\n", + error); return; } @@ -99,9 +103,10 @@ int rtas_set_rtc_time(struct rtc_time *tm) } } while (wait_time && (get_tb() < max_wait_tb)); - if (error != 0 && printk_ratelimit()) - printk(KERN_WARNING "error: setting the clock failed (%d)\n", - error); + if (error != 0) + printk_ratelimited(KERN_WARNING + "error: setting the clock failed (%d)\n", + error); return 0; } -- cgit v0.10.2 From 76462232c21dc011462522387ddad0598a4f11e4 Mon Sep 17 00:00:00 2001 From: Christian Dietrich Date: Sat, 4 Jun 2011 05:36:54 +0000 Subject: arch/powerpc: use printk_ratelimited instead of printk_ratelimit Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited. Signed-off-by: Christian Dietrich Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index b96a3a0..78b76dc 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -25,6 +25,7 @@ #include #include #include +#include #ifdef CONFIG_PPC64 #include #include @@ -892,11 +893,12 @@ badframe: printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n", regs, frame, newsp); #endif - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in handle_rt_signal32: " - "%p nip %08lx lr %08lx\n", - current->comm, current->pid, - addr, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO + "%s[%d]: bad frame in handle_rt_signal32: " + "%p nip %08lx lr %08lx\n", + current->comm, current->pid, + addr, regs->nip, regs->link); force_sigsegv(sig, current); return 0; @@ -1058,11 +1060,12 @@ long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, return 0; bad: - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in sys_rt_sigreturn: " - "%p nip %08lx lr %08lx\n", - current->comm, current->pid, - rt_sf, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO + "%s[%d]: bad frame in sys_rt_sigreturn: " + "%p nip %08lx lr %08lx\n", + current->comm, current->pid, + rt_sf, regs->nip, regs->link); force_sig(SIGSEGV, current); return 0; @@ -1149,12 +1152,12 @@ int sys_debug_setcontext(struct ucontext __user *ctx, * We kill the task with a SIGSEGV in this situation. */ if (do_setcontext(ctx, regs, 1)) { - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in " - "sys_debug_setcontext: %p nip %08lx " - "lr %08lx\n", - current->comm, current->pid, - ctx, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO "%s[%d]: bad frame in " + "sys_debug_setcontext: %p nip %08lx " + "lr %08lx\n", + current->comm, current->pid, + ctx, regs->nip, regs->link); force_sig(SIGSEGV, current); goto out; @@ -1236,11 +1239,12 @@ badframe: printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n", regs, frame, newsp); #endif - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in handle_signal32: " - "%p nip %08lx lr %08lx\n", - current->comm, current->pid, - frame, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO + "%s[%d]: bad frame in handle_signal32: " + "%p nip %08lx lr %08lx\n", + current->comm, current->pid, + frame, regs->nip, regs->link); force_sigsegv(sig, current); return 0; @@ -1288,11 +1292,12 @@ long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, return 0; badframe: - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in sys_sigreturn: " - "%p nip %08lx lr %08lx\n", - current->comm, current->pid, - addr, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO + "%s[%d]: bad frame in sys_sigreturn: " + "%p nip %08lx lr %08lx\n", + current->comm, current->pid, + addr, regs->nip, regs->link); force_sig(SIGSEGV, current); return 0; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index da989ff..e91c736 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -380,10 +381,10 @@ badframe: printk("badframe in sys_rt_sigreturn, regs=%p uc=%p &uc->uc_mcontext=%p\n", regs, uc, &uc->uc_mcontext); #endif - if (show_unhandled_signals && printk_ratelimit()) - printk(regs->msr & MSR_64BIT ? fmt64 : fmt32, - current->comm, current->pid, "rt_sigreturn", - (long)uc, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, + current->comm, current->pid, "rt_sigreturn", + (long)uc, regs->nip, regs->link); force_sig(SIGSEGV, current); return 0; @@ -468,10 +469,10 @@ badframe: printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n", regs, frame, newsp); #endif - if (show_unhandled_signals && printk_ratelimit()) - printk(regs->msr & MSR_64BIT ? fmt64 : fmt32, - current->comm, current->pid, "setup_rt_frame", - (long)frame, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, + current->comm, current->pid, "setup_rt_frame", + (long)frame, regs->nip, regs->link); force_sigsegv(signr, current); return 0; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 6414a0d..1a01414 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -197,12 +198,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) if (die("Exception in kernel mode", regs, signr)) return; } else if (show_unhandled_signals && - unhandled_signal(current, signr) && - printk_ratelimit()) { - printk(regs->msr & MSR_64BIT ? fmt64 : fmt32, - current->comm, current->pid, signr, - addr, regs->nip, regs->link, code); - } + unhandled_signal(current, signr)) { + printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, + current->comm, current->pid, signr, + addr, regs->nip, regs->link, code); + } memset(&info, 0, sizeof(info)); info.si_signo = signr; @@ -1342,9 +1342,8 @@ void altivec_assist_exception(struct pt_regs *regs) } else { /* didn't recognize the instruction */ /* XXX quick hack for now: set the non-Java bit in the VSCR */ - if (printk_ratelimit()) - printk(KERN_ERR "Unrecognized altivec instruction " - "in %s at %lx\n", current->comm, regs->nip); + printk_ratelimited(KERN_ERR "Unrecognized altivec instruction " + "in %s at %lx\n", current->comm, regs->nip); current->thread.vscr.u[3] |= 0x10000; } } @@ -1548,9 +1547,8 @@ u32 ppc_warn_emulated; void ppc_warn_emulated_print(const char *type) { - if (printk_ratelimit()) - pr_warning("%s used emulated %s instruction\n", current->comm, - type); + pr_warn_ratelimited("%s used emulated %s instruction\n", current->comm, + type); } static int __init ppc_warn_emulated_init(void) diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 54f4fb9..ad35f66 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -346,11 +347,10 @@ bad_area_nosemaphore: return 0; } - if (is_exec && (error_code & DSISR_PROTFAULT) - && printk_ratelimit()) - printk(KERN_CRIT "kernel tried to execute NX-protected" - " page (%lx) - exploit attempt? (uid: %d)\n", - address, current_uid()); + if (is_exec && (error_code & DSISR_PROTFAULT)) + printk_ratelimited(KERN_CRIT "kernel tried to execute NX-protected" + " page (%lx) - exploit attempt? (uid: %d)\n", + address, current_uid()); return SIGSEGV; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 3a8de5b..58d7a53 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -1648,9 +1649,8 @@ static unsigned int _mpic_get_one_irq(struct mpic *mpic, int reg) return NO_IRQ; } if (unlikely(mpic->protected && test_bit(src, mpic->protected))) { - if (printk_ratelimit()) - printk(KERN_WARNING "%s: Got protected source %d !\n", - mpic->name, (int)src); + printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n", + mpic->name, (int)src); mpic_eoi(mpic); return NO_IRQ; } @@ -1688,9 +1688,8 @@ unsigned int mpic_get_coreint_irq(void) return NO_IRQ; } if (unlikely(mpic->protected && test_bit(src, mpic->protected))) { - if (printk_ratelimit()) - printk(KERN_WARNING "%s: Got protected source %d !\n", - mpic->name, (int)src); + printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n", + mpic->name, (int)src); return NO_IRQ; } -- cgit v0.10.2 From f5b2d0ef631bb0647ae8ed1752d2127b8fb6da70 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 29 Jun 2011 14:26:07 +0800 Subject: ALSA: HDMI - fix ELD monitor name length I noticed that the last character of the ELD monitor name is lost, this fixes the issue. This fix should be confirming to the HDA spec, and works together with the DRM part of the ELD patch. The HDA spec does not mention that Monitor_Name_String is an '\0' ending string, and it allows NML to be 1, which is only valid when MNL does not count the possible ending '\0'. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index b05f7be..e3e8531 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -294,7 +294,7 @@ static int hdmi_update_eld(struct hdmi_eld *e, snd_printd(KERN_INFO "HDMI: out of range MNL %d\n", mnl); goto out_fail; } else - strlcpy(e->monitor_name, buf + ELD_FIXED_BYTES, mnl); + strlcpy(e->monitor_name, buf + ELD_FIXED_BYTES, mnl + 1); for (i = 0; i < e->sad_count; i++) { if (ELD_FIXED_BYTES + mnl + 3 * (i + 1) > size) { -- cgit v0.10.2 From cb16c348760ad2bc79b67b20aefac05529569ed7 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 19 Jun 2011 19:21:11 +0300 Subject: KVM: x86 emulator: fix %rip-relative addressing with immediate source operand %rip-relative addressing is relative to the first byte of the next instruction, so we need to add %rip only after we've fetched any immediate bytes. Based on original patch by Li Xin . Signed-off-by: Avi Kivity Acked-by: Li Xin Signed-off-by: Marcelo Tosatti diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 6df88c7..adc9867 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3372,7 +3372,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, void *insn, int insn_len) int def_op_bytes, def_ad_bytes, goffset, simd_prefix; bool op_prefix = false; struct opcode opcode; - struct operand memop = { .type = OP_NONE }; + struct operand memop = { .type = OP_NONE }, *memopp = NULL; c->eip = ctxt->eip; c->fetch.start = c->eip; @@ -3547,9 +3547,6 @@ done_prefixes: if (memop.type == OP_MEM && c->ad_bytes != 8) memop.addr.mem.ea = (u32)memop.addr.mem.ea; - if (memop.type == OP_MEM && c->rip_relative) - memop.addr.mem.ea += c->eip; - /* * Decode and fetch the source operand: register, memory * or immediate. @@ -3571,6 +3568,7 @@ done_prefixes: c->op_bytes; srcmem_common: c->src = memop; + memopp = &c->src; break; case SrcImmU16: rc = decode_imm(ctxt, &c->src, 2, false); @@ -3667,6 +3665,7 @@ done_prefixes: case DstMem: case DstMem64: c->dst = memop; + memopp = &c->dst; if ((c->d & DstMask) == DstMem64) c->dst.bytes = 8; else @@ -3700,10 +3699,13 @@ done_prefixes: /* Special instructions do their own operand decoding. */ default: c->dst.type = OP_NONE; /* Disable writeback. */ - return 0; + break; } done: + if (memopp && memopp->type == OP_MEM && c->rip_relative) + memopp->addr.mem.ea += c->eip; + return (rc == X86EMUL_UNHANDLEABLE) ? EMULATION_FAILED : EMULATION_OK; } -- cgit v0.10.2 From b00c2c79d9ceac49d8b3ba3b097e5df33f802d9a Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 29 Jun 2011 04:23:47 +0000 Subject: sh: fix the INTC vector for IRQ and IRL in setup-sh7757 Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index 717a76b..fad2da4 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -1089,13 +1089,13 @@ static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups, /* Support for external interrupt pins in IRQ mode */ static struct intc_vect vectors_irq0123[] __initdata = { - INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), - INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), + INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240), + INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0), }; static struct intc_vect vectors_irq4567[] __initdata = { - INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), - INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), + INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340), + INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0), }; static struct intc_sense_reg sense_registers[] __initdata = { @@ -1129,14 +1129,14 @@ static struct intc_vect vectors_irl0123[] __initdata = { }; static struct intc_vect vectors_irl4567[] __initdata = { - INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20), - INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60), - INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0), - INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0), - INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20), - INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60), - INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0), - INTC_VECT(IRL4_HHHL, 0xcc0), + INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220), + INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260), + INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0), + INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0), + INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320), + INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360), + INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0), + INTC_VECT(IRL4_HHHL, 0x3c0), }; static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123, -- cgit v0.10.2 From 6afba9e7fca5ad6a701c13760639faa0906fe487 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 29 Jun 2011 04:23:42 +0000 Subject: sh: fix the value of sh_dmae_slave_config in setup-sh7757 Fix the value of chcr for SCIF[2-4]_RX and RIIC[0-9]_RX and the value of mid_rid for some RIIC. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index fad2da4..e915dea 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -183,7 +183,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF2_RX, .addr = 0x1f4b0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -197,7 +197,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF3_RX, .addr = 0x1f4c0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -211,7 +211,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF4_RX, .addr = 0x1f4d0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, @@ -228,7 +228,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC0_RX, .addr = 0x1e500013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -242,7 +242,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC1_RX, .addr = 0x1e510013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -256,7 +256,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC2_RX, .addr = 0x1e520013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xa2, }, @@ -265,12 +265,12 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { .addr = 0x1e530012, .chcr = SM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xab, + .mid_rid = 0xa9, }, { .slave_id = SHDMA_SLAVE_RIIC3_RX, .addr = 0x1e530013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xaf, }, @@ -279,14 +279,14 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { .addr = 0x1e540012, .chcr = SM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xc1, + .mid_rid = 0xc5, }, { .slave_id = SHDMA_SLAVE_RIIC4_RX, .addr = 0x1e540013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xc2, + .mid_rid = 0xc6, }, }; @@ -301,7 +301,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC5_RX, .addr = 0x1e550013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -315,7 +315,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC6_RX, .addr = 0x1e560013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -329,7 +329,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC7_RX, .addr = 0x1e570013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, @@ -343,7 +343,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC8_RX, .addr = 0x1e580013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x46, }, @@ -357,7 +357,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC9_RX, .addr = 0x1e590013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x52, }, -- cgit v0.10.2 From 090ab3ff8ebb842c0f159d34d57d6e51bd94ace1 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 26 Apr 2011 06:29:53 +0100 Subject: ARM: 6886/1: mmc, Add zboot from eSD support for SuperH Mobile ARM This allows a ROM-able zImage to be written to eSD and for SuperH Mobile ARM to boot directly from the SDHI hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Paul Mundt Acked-by: Magnus Damm Acked-by: Paul Mundt Signed-off-by: Simon Horman Signed-off-by: Russell King diff --git a/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt b/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt new file mode 100644 index 0000000..4419598 --- /dev/null +++ b/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt @@ -0,0 +1,42 @@ +ROM-able zImage boot from eSD +----------------------------- + +An ROM-able zImage compiled with ZBOOT_ROM_SDHI may be written to eSD and +SuperH Mobile ARM will to boot directly from the SDHI hardware block. + +This is achieved by the mask ROM loading the first portion of the image into +MERAM and then jumping to it. This portion contains loader code which +copies the entire image to SDRAM and jumps to it. From there the zImage +boot code proceeds as normal, uncompressing the image into its final +location and then jumping to it. + +This code has been tested on an mackerel board using the developer 1A eSD +boot mode which is configured using the following jumper settings. + + 8 7 6 5 4 3 2 1 + x|x|x|x| |x|x| +S4 -+-+-+-+-+-+-+- + | | | |x| | |x on + +The eSD card needs to be present in SDHI slot 1 (CN7). +As such S1 and S33 also need to be configured as per +the notes in arch/arm/mach-shmobile/board-mackerel.c. + +A partial zImage must be written to physical partition #1 (boot) +of the eSD at sector 0 in vrl4 format. A utility vrl4 is supplied to +accomplish this. + +e.g. + vrl4 < zImage | dd of=/dev/sdX bs=512 count=17 + +A full copy of _the same_ zImage should be written to physical partition #1 +(boot) of the eSD at sector 0. This should _not_ be in vrl4 format. + + vrl4 < zImage | dd of=/dev/sdX bs=512 + +Note: The commands above assume that the physical partition has been +switched. No such facility currently exists in the Linux Kernel. + +Physical partitions are described in the eSD specification. At the time of +writing they are not the same as partitions that are typically configured +using fdisk and visible through /proc/partitions diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cc0dcbf..cd8f520 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1718,17 +1718,34 @@ config ZBOOT_ROM Say Y here if you intend to execute your compressed kernel image (zImage) directly from ROM or flash. If unsure, say N. +choice + prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" + depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + default ZBOOT_ROM_NONE + help + Include experimental SD/MMC loading code in the ROM-able zImage. + With this enabled it is possible to write the the ROM-able zImage + kernel image to an MMC or SD card and boot the kernel straight + from the reset vector. At reset the processor Mask ROM will load + the first part of the the ROM-able zImage which in turn loads the + rest the kernel image to RAM. + +config ZBOOT_ROM_NONE + bool "No SD/MMC loader in zImage (EXPERIMENTAL)" + help + Do not load image from SD or MMC + config ZBOOT_ROM_MMCIF bool "Include MMCIF loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL help - Say Y here to include experimental MMCIF loading code in the - ROM-able zImage. With this enabled it is possible to write the - the ROM-able zImage kernel image to an MMC card and boot the - kernel straight from the reset vector. At reset the processor - Mask ROM will load the first part of the the ROM-able zImage - which in turn loads the rest the kernel image to RAM using the - MMCIF hardware block. + Load image from MMCIF hardware block. + +config ZBOOT_ROM_SH_MOBILE_SDHI + bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" + help + Load image from SDHI hardware block + +endchoice config CMDLINE string "Default kernel command string" diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 23aad07..0c74a6f 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -6,13 +6,19 @@ OBJS = -# Ensure that mmcif loader code appears early in the image +# Ensure that MMCIF loader code appears early in the image # to minimise that number of bocks that have to be read in # order to load it. ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y) -ifeq ($(CONFIG_ARCH_SH7372),y) OBJS += mmcif-sh7372.o endif + +# Ensure that SDHI loader code appears early in the image +# to minimise that number of bocks that have to be read in +# order to load it. +ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y) +OBJS += sdhi-shmobile.o +OBJS += sdhi-sh7372.o endif AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index c943d2e..fe3719b 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -25,14 +25,14 @@ /* load board-specific initialization code */ #include -#ifdef CONFIG_ZBOOT_ROM_MMCIF - /* Load image from MMC */ - adr sp, __tmp_stack + 128 +#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI) + /* Load image from MMC/SD */ + adr sp, __tmp_stack + 256 ldr r0, __image_start ldr r1, __image_end subs r1, r1, r0 ldr r0, __load_base - bl mmcif_loader + bl mmc_loader /* Jump to loaded code */ ldr r0, __loaded @@ -51,9 +51,9 @@ __loaded: .long __continue .align __tmp_stack: - .space 128 + .space 256 __continue: -#endif /* CONFIG_ZBOOT_ROM_MMCIF */ +#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ b 1f __atags:@ tag #1 diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index 7453c83..b6f61d9 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -40,7 +40,7 @@ * to an MMC card * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1 */ -asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len) +asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) { mmc_init_progress(); mmc_update_progress(MMC_PROGRESS_ENTER); diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c new file mode 100644 index 0000000..d403a8b --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -0,0 +1,95 @@ +/* + * SuperH Mobile SDHI + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2010 Kuninori Morimoto + * Copyright (C) 2010 Simon Horman + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Parts inspired by u-boot + */ + +#include +#include +#include +#include + +#include "sdhi-shmobile.h" + +#define PORT179CR 0xe60520b3 +#define PORT180CR 0xe60520b4 +#define PORT181CR 0xe60520b5 +#define PORT182CR 0xe60520b6 +#define PORT183CR 0xe60520b7 +#define PORT184CR 0xe60520b8 + +#define SMSTPCR3 0xe615013c + +#define CR_INPUT_ENABLE 0x10 +#define CR_FUNCTION1 0x01 + +#define SDHI1_BASE (void __iomem *)0xe6860000 +#define SDHI_BASE SDHI1_BASE + +/* SuperH Mobile SDHI loader + * + * loads the zImage from an SD card starting from block 0 + * on physical partition 1 + * + * The image must be start with a vrl4 header and + * the zImage must start at offset 512 of the image. That is, + * at block 1 (=byte 512) of physical partition 1 + * + * Use the following line to write the vrl4 formated zImage + * to an SD card + * # dd if=vrl4.out of=/dev/sdx bs=512 + */ +asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) +{ + int high_capacity; + + mmc_init_progress(); + + mmc_update_progress(MMC_PROGRESS_ENTER); + /* Initialise SDHI1 */ + /* PORT184CR: GPIO_FN_SDHICMD1 Control */ + __raw_writeb(CR_FUNCTION1, PORT184CR); + /* PORT179CR: GPIO_FN_SDHICLK1 Control */ + __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR); + /* PORT181CR: GPIO_FN_SDHID1_3 Control */ + __raw_writeb(CR_FUNCTION1, PORT183CR); + /* PORT182CR: GPIO_FN_SDHID1_2 Control */ + __raw_writeb(CR_FUNCTION1, PORT182CR); + /* PORT183CR: GPIO_FN_SDHID1_1 Control */ + __raw_writeb(CR_FUNCTION1, PORT181CR); + /* PORT180CR: GPIO_FN_SDHID1_0 Control */ + __raw_writeb(CR_FUNCTION1, PORT180CR); + + /* Enable clock to SDHI1 hardware block */ + __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3); + + /* setup SDHI hardware */ + mmc_update_progress(MMC_PROGRESS_INIT); + high_capacity = sdhi_boot_init(SDHI_BASE); + if (high_capacity < 0) + goto err; + + mmc_update_progress(MMC_PROGRESS_LOAD); + /* load kernel */ + if (sdhi_boot_do_read(SDHI_BASE, high_capacity, + 0, /* Kernel is at block 1 */ + (len + TMIO_BBS - 1) / TMIO_BBS, buf)) + goto err; + + /* Disable clock to SDHI1 hardware block */ + __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3); + + mmc_update_progress(MMC_PROGRESS_DONE); + + return; +err: + for(;;); +} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c new file mode 100644 index 0000000..bd3d469 --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-shmobile.c @@ -0,0 +1,449 @@ +/* + * SuperH Mobile SDHI + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2010 Kuninori Morimoto + * Copyright (C) 2010 Simon Horman + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Parts inspired by u-boot + */ + +#include +#include +#include +#include +#include +#include +#include + +#define OCR_FASTBOOT (1<<29) +#define OCR_HCS (1<<30) +#define OCR_BUSY (1<<31) + +#define RESP_CMD12 0x00000030 + +static inline u16 sd_ctrl_read16(void __iomem *base, int addr) +{ + return __raw_readw(base + addr); +} + +static inline u32 sd_ctrl_read32(void __iomem *base, int addr) +{ + return __raw_readw(base + addr) | + __raw_readw(base + addr + 2) << 16; +} + +static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val) +{ + __raw_writew(val, base + addr); +} + +static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val) +{ + __raw_writew(val, base + addr); + __raw_writew(val >> 16, base + addr + 2); +} + +#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \ + TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \ + TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \ + TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \ + TMIO_STAT_ILL_FUNC) + +static int sdhi_intr(void __iomem *base) +{ + unsigned long state = sd_ctrl_read32(base, CTL_STATUS); + + if (state & ALL_ERROR) { + sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR); + sd_ctrl_write32(base, CTL_IRQ_MASK, + ALL_ERROR | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return -EINVAL; + } + if (state & TMIO_STAT_CMDRESPEND) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_CMDRESPEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + if (state & TMIO_STAT_RXRDY) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + if (state & TMIO_STAT_DATAEND) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_DATAEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + + return -EAGAIN; +} + +static int sdhi_boot_wait_resp_end(void __iomem *base) +{ + int err = -EAGAIN, timeout = 10000000; + + while (timeout--) { + err = sdhi_intr(base); + if (err != -EAGAIN) + break; + udelay(1); + } + + return err; +} + +/* SDHI_CLK_CTRL */ +#define CLK_MMC_ENABLE (1 << 8) +#define CLK_MMC_INIT (1 << 6) /* clk / 256 */ + +static void sdhi_boot_mmc_clk_stop(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000); + msleep(10); + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE & + sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); + msleep(10); +} + +static void sdhi_boot_mmc_clk_start(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE | + sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); + msleep(10); + sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE); + msleep(10); +} + +static void sdhi_boot_reset(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_RESET_SD, 0x0000); + msleep(10); + sd_ctrl_write16(base, CTL_RESET_SD, 0x0001); + msleep(10); +} + +/* Set MMC clock / power. + * Note: This controller uses a simple divider scheme therefore it cannot + * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as + * MMC wont run that fast, it has to be clocked at 12MHz which is the next + * slowest setting. + */ +static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios) +{ + if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY) + return -EBUSY; + + if (ios->clock) + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, + ios->clock | CLK_MMC_ENABLE); + + /* Power sequence - OFF -> ON -> UP */ + switch (ios->power_mode) { + case MMC_POWER_OFF: /* power down SD bus */ + sdhi_boot_mmc_clk_stop(base); + break; + case MMC_POWER_ON: /* power up SD bus */ + break; + case MMC_POWER_UP: /* start bus clock */ + sdhi_boot_mmc_clk_start(base); + break; + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0); + break; + case MMC_BUS_WIDTH_4: + sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0); + break; + } + + /* Let things settle. delay taken from winCE driver */ + udelay(140); + + return 0; +} + +/* These are the bitmasks the tmio chip requires to implement the MMC response + * types. Note that R1 and R6 are the same in this scheme. */ +#define RESP_NONE 0x0300 +#define RESP_R1 0x0400 +#define RESP_R1B 0x0500 +#define RESP_R2 0x0600 +#define RESP_R3 0x0700 +#define DATA_PRESENT 0x0800 +#define TRANSFER_READ 0x1000 + +static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd) +{ + int err, c = cmd->opcode; + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: c |= RESP_NONE; break; + case MMC_RSP_R1: c |= RESP_R1; break; + case MMC_RSP_R1B: c |= RESP_R1B; break; + case MMC_RSP_R2: c |= RESP_R2; break; + case MMC_RSP_R3: c |= RESP_R3; break; + default: + return -EINVAL; + } + + /* No interrupts so this may not be cleared */ + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); + + sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg); + sd_ctrl_write16(base, CTL_SD_CMD, c); + + + sd_ctrl_write32(base, CTL_IRQ_MASK, + ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) & + sd_ctrl_read32(base, CTL_IRQ_MASK)); + + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE); + + return 0; +} + +static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity, + unsigned long block, unsigned short *buf) +{ + int err, i; + + /* CMD17 - Read */ + { + struct mmc_command cmd; + + cmd.opcode = MMC_READ_SINGLE_BLOCK | \ + TRANSFER_READ | DATA_PRESENT; + if (high_capacity) + cmd.arg = block; + else + cmd.arg = block * TMIO_BBS; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + sd_ctrl_write32(base, CTL_IRQ_MASK, + ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY | + TMIO_STAT_TXUNDERRUN) & + sd_ctrl_read32(base, CTL_IRQ_MASK)); + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS); + for (i = 0; i < TMIO_BBS / sizeof(*buf); i++) + *buf++ = sd_ctrl_read16(base, RESP_CMD12); + + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + return 0; +} + +int sdhi_boot_do_read(void __iomem *base, int high_capacity, + unsigned long offset, unsigned short count, + unsigned short *buf) +{ + unsigned long i; + int err = 0; + + for (i = 0; i < count; i++) { + err = sdhi_boot_do_read_single(base, high_capacity, offset + i, + buf + (i * TMIO_BBS / + sizeof(*buf))); + if (err) + return err; + } + + return 0; +} + +#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34) + +int sdhi_boot_init(void __iomem *base) +{ + bool sd_v2 = false, sd_v1_0 = false; + unsigned short cid; + int err, high_capacity = 0; + + sdhi_boot_mmc_clk_stop(base); + sdhi_boot_reset(base); + + /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */ + { + struct mmc_ios ios; + ios.power_mode = MMC_POWER_ON; + ios.bus_width = MMC_BUS_WIDTH_1; + ios.clock = CLK_MMC_INIT; + err = sdhi_boot_mmc_set_ios(base, &ios); + if (err) + return err; + } + + /* CMD0 */ + { + struct mmc_command cmd; + msleep(1); + cmd.opcode = MMC_GO_IDLE_STATE; + cmd.arg = 0; + cmd.flags = MMC_RSP_NONE; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + msleep(2); + } + + /* CMD8 - Test for SD version 2 */ + { + struct mmc_command cmd; + cmd.opcode = SD_SEND_IF_COND; + cmd.arg = (VOLTAGES != 0) << 8 | 0xaa; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); /* Ignore error */ + if ((cmd.resp[0] & 0xff) == 0xaa) + sd_v2 = true; + } + + /* CMD55 - Get OCR (SD) */ + { + int timeout = 1000; + struct mmc_command cmd; + + cmd.arg = 0; + + do { + cmd.opcode = MMC_APP_CMD; + cmd.flags = MMC_RSP_R1; + cmd.arg = 0; + err = sdhi_boot_request(base, &cmd); + if (err) + break; + + cmd.opcode = SD_APP_OP_COND; + cmd.flags = MMC_RSP_R3; + cmd.arg = (VOLTAGES & 0xff8000); + if (sd_v2) + cmd.arg |= OCR_HCS; + cmd.arg |= OCR_FASTBOOT; + err = sdhi_boot_request(base, &cmd); + if (err) + break; + + msleep(1); + } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); + + if (!err && timeout) { + if (!sd_v2) + sd_v1_0 = true; + high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; + } + } + + /* CMD1 - Get OCR (MMC) */ + if (!sd_v2 && !sd_v1_0) { + int timeout = 1000; + struct mmc_command cmd; + + do { + cmd.opcode = MMC_SEND_OP_COND; + cmd.arg = VOLTAGES | OCR_HCS; + cmd.flags = MMC_RSP_R3; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + + msleep(1); + } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); + + if (!timeout) + return -EAGAIN; + + high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; + } + + /* CMD2 - Get CID */ + { + struct mmc_command cmd; + cmd.opcode = MMC_ALL_SEND_CID; + cmd.arg = 0; + cmd.flags = MMC_RSP_R2; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD3 + * MMC: Set the relative address + * SD: Get the relative address + * Also puts the card into the standby state + */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SET_RELATIVE_ADDR; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + cid = cmd.resp[0] >> 16; + } + + /* CMD9 - Get CSD */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SEND_CSD; + cmd.arg = cid << 16; + cmd.flags = MMC_RSP_R2; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD7 - Select the card */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SELECT_CARD; + //cmd.arg = rca << 16; + cmd.arg = cid << 16; + //cmd.flags = MMC_RSP_R1B; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD16 - Set the block size */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SET_BLOCKLEN; + cmd.arg = TMIO_BBS; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + return high_capacity; +} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.h b/arch/arm/boot/compressed/sdhi-shmobile.h new file mode 100644 index 0000000..92eaa09 --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-shmobile.h @@ -0,0 +1,11 @@ +#ifndef SDHI_MOBILE_H +#define SDHI_MOBILE_H + +#include + +int sdhi_boot_do_read(void __iomem *base, int high_capacity, + unsigned long offset, unsigned short count, + unsigned short *buf); +int sdhi_boot_init(void __iomem *base); + +#endif diff --git a/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h new file mode 100644 index 0000000..4a81b01 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h @@ -0,0 +1,21 @@ +#ifndef SDHI_SH7372_H +#define SDHI_SH7372_H + +#define SDGENCNTA 0xfe40009c + +/* The countdown of SDGENCNTA is controlled by + * ZB3D2CLK which runs at 149.5MHz. + * That is 149.5ticks/us. Approximate this as 150ticks/us. + */ +static void udelay(int us) +{ + __raw_writel(us * 150, SDGENCNTA); + while(__raw_readl(SDGENCNTA)) ; +} + +static void msleep(int ms) +{ + udelay(ms * 1000); +} + +#endif diff --git a/arch/arm/mach-shmobile/include/mach/sdhi.h b/arch/arm/mach-shmobile/include/mach/sdhi.h new file mode 100644 index 0000000..0ec9e69 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sdhi.h @@ -0,0 +1,16 @@ +#ifndef SDHI_H +#define SDHI_H + +/************************************************** + * + * CPU specific settings + * + **************************************************/ + +#ifdef CONFIG_ARCH_SH7372 +#include "mach/sdhi-sh7372.h" +#else +#error "unsupported CPU." +#endif + +#endif /* SDHI_H */ -- cgit v0.10.2 From ac8b9c1ce094d43372d0259de08045ffee745a41 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 10:22:08 +0100 Subject: ARM: entry: prefetch/data abort helpers: convert to macros Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 90c62cd..dbe9eb8 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -44,6 +44,37 @@ 9997: .endm + .macro pabt_helper + mov r0, r2 @ pass address of aborted instruction. +#ifdef MULTI_PABORT + ldr r4, .LCprocfns + mov lr, pc + ldr pc, [r4, #PROCESSOR_PABT_FUNC] +#else + bl CPU_PABORT_HANDLER +#endif + .endm + + .macro dabt_helper + + @ + @ Call the processor-specific abort handler: + @ + @ r2 - aborted context pc + @ r3 - aborted context cpsr + @ + @ The abort handler must return the aborted address in r0, and + @ the fault status register in r1. r9 must be preserved. + @ +#ifdef MULTI_DABORT + ldr r4, .LCprocfns + mov lr, pc + ldr pc, [r4, #PROCESSOR_DABT_FUNC] +#else + bl CPU_DABORT_HANDLER +#endif + .endm + #ifdef CONFIG_KPROBES .section .kprobes.text,"ax",%progbits #else @@ -159,22 +190,7 @@ __dabt_svc: tst r3, #PSR_I_BIT biceq r9, r9, #PSR_I_BIT - @ - @ Call the processor-specific abort handler: - @ - @ r2 - aborted context pc - @ r3 - aborted context cpsr - @ - @ The abort handler must return the aborted address in r0, and - @ the fault status register in r1. r9 must be preserved. - @ -#ifdef MULTI_DABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_DABT_FUNC] -#else - bl CPU_DABORT_HANDLER -#endif + dabt_helper @ @ set desired IRQ state, then call main handler @@ -298,14 +314,7 @@ __pabt_svc: tst r3, #PSR_I_BIT biceq r9, r9, #PSR_I_BIT - mov r0, r2 @ pass address of aborted instruction. -#ifdef MULTI_PABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_PABT_FUNC] -#else - bl CPU_PABORT_HANDLER -#endif + pabt_helper debug_entry r1 msr cpsr_c, r9 @ Maybe enable interrupts mov r2, sp @ regs @@ -401,23 +410,7 @@ ENDPROC(__pabt_svc) __dabt_usr: usr_entry kuser_cmpxchg_check - - @ - @ Call the processor-specific abort handler: - @ - @ r2 - aborted context pc - @ r3 - aborted context cpsr - @ - @ The abort handler must return the aborted address in r0, and - @ the fault status register in r1. - @ -#ifdef MULTI_DABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_DABT_FUNC] -#else - bl CPU_DABORT_HANDLER -#endif + dabt_helper @ @ IRQs on, then call the main handler @@ -682,15 +675,7 @@ ENDPROC(__und_usr_unknown) .align 5 __pabt_usr: usr_entry - - mov r0, r2 @ pass address of aborted instruction. -#ifdef MULTI_PABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_PABT_FUNC] -#else - bl CPU_PABORT_HANDLER -#endif + pabt_helper debug_entry r1 enable_irq @ Enable interrupts mov r2, sp @ regs -- cgit v0.10.2 From 0402becef94c43bb2bb483653a5cee2fb5049764 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 15:46:08 +0100 Subject: ARM: entry: prefetch/data abort helpers: avoid corrupting r4 Replace r4 with ip for calling abort helpers - ip is allowed to be corrupted by called functions in the ABI, so it makes more sense to use such a register. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index dbe9eb8..6855f6d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -47,9 +47,9 @@ .macro pabt_helper mov r0, r2 @ pass address of aborted instruction. #ifdef MULTI_PABORT - ldr r4, .LCprocfns + ldr ip, .LCprocfns mov lr, pc - ldr pc, [r4, #PROCESSOR_PABT_FUNC] + ldr pc, [ip, #PROCESSOR_PABT_FUNC] #else bl CPU_PABORT_HANDLER #endif @@ -67,9 +67,9 @@ @ the fault status register in r1. r9 must be preserved. @ #ifdef MULTI_DABORT - ldr r4, .LCprocfns + ldr ip, .LCprocfns mov lr, pc - ldr pc, [r4, #PROCESSOR_DABT_FUNC] + ldr pc, [ip, #PROCESSOR_DABT_FUNC] #else bl CPU_DABORT_HANDLER #endif -- cgit v0.10.2 From be020f8618caa0670a2a5b5a5df79549520f7867 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 13:42:01 +0100 Subject: ARM: entry: abort-macro: specify registers to be used for macros Require all callers of abort macros to specify the registers to be used. This improves the documentation at the callsites as to which registers are being used by this assembly code. Signed-off-by: Russell King diff --git a/arch/arm/mm/abort-ev4t.S b/arch/arm/mm/abort-ev4t.S index b628254..9910123 100644 --- a/arch/arm/mm/abort-ev4t.S +++ b/arch/arm/mm/abort-ev4t.S @@ -22,7 +22,7 @@ ENTRY(v4t_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - do_thumb_abort + do_thumb_abort fsr=r1, pc=r2, psr=r3, tmp=r3 ldreq r3, [r2] @ read aborted ARM instruction bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ check write diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S index 02251b5..800e8d4 100644 --- a/arch/arm/mm/abort-ev5t.S +++ b/arch/arm/mm/abort-ev5t.S @@ -22,10 +22,10 @@ ENTRY(v5t_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - do_thumb_abort + do_thumb_abort fsr=r1, pc=r2, psr=r3, tmp=r3 ldreq r3, [r2] @ read aborted ARM instruction bic r1, r1, #1 << 11 @ clear bits 11 of FSR - do_ldrd_abort + do_ldrd_abort tmp=r2, insn=r3 tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 mov pc, lr diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S index bce68d6..bcb58d2 100644 --- a/arch/arm/mm/abort-ev5tj.S +++ b/arch/arm/mm/abort-ev5tj.S @@ -25,9 +25,9 @@ ENTRY(v5tj_early_abort) bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #PSR_J_BIT @ Java? movne pc, lr - do_thumb_abort + do_thumb_abort fsr=r1, pc=r2, psr=r3, tmp=r3 ldreq r3, [r2] @ read aborted ARM instruction - do_ldrd_abort + do_ldrd_abort tmp=r2, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. mov pc, lr diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 1478aa5..ef526e7 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -35,12 +35,12 @@ ENTRY(v6_early_abort) bic r1, r1, #1 << 11 @ clear bit 11 of FSR tst r3, #PSR_J_BIT @ Java? movne pc, lr - do_thumb_abort + do_thumb_abort fsr=r1, pc=r2, psr=r3, tmp=r3 ldreq r3, [r2] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 reveq r3, r3 #endif - do_ldrd_abort + do_ldrd_abort tmp=r2, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. mov pc, lr diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index d7cb1bf..8d3b9f9 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -9,33 +9,33 @@ * */ - .macro do_thumb_abort - tst r3, #PSR_T_BIT + .macro do_thumb_abort, fsr, pc, psr, tmp + tst \psr, #PSR_T_BIT beq not_thumb - ldrh r3, [r2] @ Read aborted Thumb instruction - and r3, r3, # 0xfe00 @ Mask opcode field - cmp r3, # 0x5600 @ Is it ldrsb? - orreq r3, r3, #1 << 11 @ Set L-bit if yes - tst r3, #1 << 11 @ L = 0 -> write - orreq r1, r1, #1 << 11 @ yes. + ldrh \tmp, [\pc] @ Read aborted Thumb instruction + and \tmp, \tmp, # 0xfe00 @ Mask opcode field + cmp \tmp, # 0x5600 @ Is it ldrsb? + orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes + tst \tmp, #1 << 11 @ L = 0 -> write + orreq \psr, \psr, #1 << 11 @ yes. mov pc, lr not_thumb: .endm /* - * We check for the following insturction encoding for LDRD. + * We check for the following instruction encoding for LDRD. * - * [27:25] == 0 + * [27:25] == 000 * [7:4] == 1101 * [20] == 0 */ - .macro do_ldrd_abort - tst r3, #0x0e000000 @ [27:25] == 0 + .macro do_ldrd_abort, tmp, insn + tst \insn, #0x0e000000 @ [27:25] == 0 bne not_ldrd - and r2, r3, #0x000000f0 @ [7:4] == 1101 - cmp r2, #0x000000d0 + and \tmp, \insn, #0x000000f0 @ [7:4] == 1101 + cmp \tmp, #0x000000d0 bne not_ldrd - tst r3, #1 << 20 @ [20] == 0 + tst \insn, #1 << 20 @ [20] == 0 moveq pc, lr not_ldrd: .endm -- cgit v0.10.2 From 198a0a927ab9c52a68297120ee6dd4e36a975b0e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 13:51:44 +0100 Subject: ARM: entry: abort-macro: simplify do_ldrd_abort We can test bits 27:25 and 20 of the instruction at the same time; there's no need to separate out the check of bit 20. Signed-off-by: Russell King diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index 8d3b9f9..af97a10 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -30,12 +30,10 @@ not_thumb: * [20] == 0 */ .macro do_ldrd_abort, tmp, insn - tst \insn, #0x0e000000 @ [27:25] == 0 + tst \insn, #0x0e100000 @ [27:25,20] == 0 bne not_ldrd and \tmp, \insn, #0x000000f0 @ [7:4] == 1101 cmp \tmp, #0x000000d0 - bne not_ldrd - tst \insn, #1 << 20 @ [20] == 0 moveq pc, lr not_ldrd: .endm -- cgit v0.10.2 From 1613cc1119ecdb1bdb950da53065e615e4c4b8db Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 10:57:57 +0100 Subject: ARM: entry: no need to increase preempt count for IRQ handlers irq_enter() and irq_exit() already take care of the preempt_count handling for interrupts, which increment and decrement the hardirq bits of the preempt count. So we can remove the preempt count handing in our IRQ entry/exit assembly, like x86 did some 9 years ago. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 6855f6d..1e5f387 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -220,16 +220,12 @@ __irq_svc: #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif -#ifdef CONFIG_PREEMPT - get_thread_info tsk - ldr r8, [tsk, #TI_PREEMPT] @ get preempt count - add r7, r8, #1 @ increment it - str r7, [tsk, #TI_PREEMPT] -#endif irq_handler + #ifdef CONFIG_PREEMPT - str r8, [tsk, #TI_PREEMPT] @ restore preempt count + get_thread_info tsk + ldr r8, [tsk, #TI_PREEMPT] @ get preempt count ldr r0, [tsk, #TI_FLAGS] @ get flags teq r8, #0 @ if preempt count != 0 movne r0, #0 @ force flags to 0 @@ -432,23 +428,8 @@ __irq_usr: bl trace_hardirqs_off #endif - get_thread_info tsk -#ifdef CONFIG_PREEMPT - ldr r8, [tsk, #TI_PREEMPT] @ get preempt count - add r7, r8, #1 @ increment it - str r7, [tsk, #TI_PREEMPT] -#endif - irq_handler -#ifdef CONFIG_PREEMPT - ldr r0, [tsk, #TI_PREEMPT] - str r8, [tsk, #TI_PREEMPT] - teq r0, r7 - ARM( strne r0, [r0, -r0] ) - THUMB( movne r0, #0 ) - THUMB( strne r0, [r0] ) -#endif - + get_thread_info tsk mov why, #0 b ret_to_user_from_irq UNWIND(.fnend ) -- cgit v0.10.2 From fbab1c809467efe001194ab8bb17f0f451a17f97 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 16:57:50 +0100 Subject: ARM: entry: no need to check parent IRQ mask in IRQ handler return There's no point checking to see whether IRQs were masked in the parent context when returning from IRQ handling - the fact that we're handling an IRQ means that the parent context must have had IRQs unmasked. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 1e5f387..fd42e66 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -234,8 +234,9 @@ __irq_svc: #endif ldr r4, [sp, #S_PSR] @ irqs are already disabled #ifdef CONFIG_TRACE_IRQFLAGS - tst r4, #PSR_I_BIT - bleq trace_hardirqs_on + @ The parent context IRQs must have been enabled to get here in + @ the first place, so there's no point checking the PSR I bit. + bl trace_hardirqs_on #endif svc_exit r4 @ return from exception UNWIND(.fnend ) -- cgit v0.10.2 From f12482c9393da2c1f5cb3217f29aa79c653dd980 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 22 Jun 2011 15:30:51 +0100 Subject: ARM: 6974/1: pmu: refactor reservation Currently, PMU platform_device reservation relies on some minor abuse of the platform_device::id field for determining the type of PMU. This is problematic for device tree based probing, where the ID cannot be controlled. This patch removes reliance on the id field, and depends on each PMU's platform driver to figure out which type it is. As all PMUs handled by the current platform_driver name "arm-pmu" are CPU PMUs, this convention is hardcoded. New PMU types can be supported through the use of {of,platform}_device_id tables Signed-off-by: Mark Rutland Acked-by: Jamie Iles Acked-by: Will Deacon Cc: Rob Herring Cc: Mathieu Desnoyers Signed-off-by: Russell King diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 7544ce6..67c70a3 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -52,7 +52,7 @@ reserve_pmu(enum arm_pmu_type device); * a cookie. */ extern int -release_pmu(struct platform_device *pdev); +release_pmu(enum arm_pmu_type type); /** * init_pmu() - Initialise the PMU. diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d53c0ab..a6c643f 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -435,7 +435,7 @@ armpmu_reserve_hardware(void) if (irq >= 0) free_irq(irq, NULL); } - release_pmu(pmu_device); + release_pmu(ARM_PMU_DEVICE_CPU); pmu_device = NULL; } @@ -454,7 +454,7 @@ armpmu_release_hardware(void) } armpmu->stop(); - release_pmu(pmu_device); + release_pmu(ARM_PMU_DEVICE_CPU); pmu_device = NULL; } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2c79eec..87942b9 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -25,36 +25,41 @@ static volatile long pmu_lock; static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES]; -static int __devinit pmu_device_probe(struct platform_device *pdev) +static int __devinit pmu_register(struct platform_device *pdev, + enum arm_pmu_type type) { - - if (pdev->id < 0 || pdev->id >= ARM_NUM_PMU_DEVICES) { + if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { pr_warning("received registration request for unknown " - "device %d\n", pdev->id); + "device %d\n", type); return -EINVAL; } - if (pmu_devices[pdev->id]) + if (pmu_devices[type]) pr_warning("registering new PMU device type %d overwrites " - "previous registration!\n", pdev->id); + "previous registration!\n", type); else pr_info("registered new PMU device of type %d\n", - pdev->id); + type); - pmu_devices[pdev->id] = pdev; + pmu_devices[type] = pdev; return 0; } -static struct platform_driver pmu_driver = { +static int __devinit armpmu_device_probe(struct platform_device *pdev) +{ + return pmu_register(pdev, ARM_PMU_DEVICE_CPU); +} + +static struct platform_driver armpmu_driver = { .driver = { .name = "arm-pmu", }, - .probe = pmu_device_probe, + .probe = armpmu_device_probe, }; static int __init register_pmu_driver(void) { - return platform_driver_register(&pmu_driver); + return platform_driver_register(&armpmu_driver); } device_initcall(register_pmu_driver); @@ -77,11 +82,11 @@ reserve_pmu(enum arm_pmu_type device) EXPORT_SYMBOL_GPL(reserve_pmu); int -release_pmu(struct platform_device *pdev) +release_pmu(enum arm_pmu_type device) { - if (WARN_ON(pdev != pmu_devices[pdev->id])) + if (WARN_ON(!pmu_devices[device])) return -EINVAL; - clear_bit_unlock(pdev->id, &pmu_lock); + clear_bit_unlock(device, &pmu_lock); return 0; } EXPORT_SYMBOL_GPL(release_pmu); -- cgit v0.10.2 From ae0c3751ab08d3fe039d48935e9ad2c46711b23b Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 22 Jun 2011 15:32:48 +0100 Subject: ARM: 6975/1: pmu: reject duplicate PMU registrations Currently, the PMU reservation framework allows for multiple PMUs of the same type to register themselves. This can lead to a bug with the sequence: register_pmu(pmu1); reserve_pmu(pmu_type); register_pmu(pmu2); release_pmu(pmu1); Here, pmu1 cannot be released, and pmu2 cannot be reserved. This patch modifies register_pmu to reject registrations where a PMU is already present, preventing this problem. PMUs which can have multiple instances should not use the PMU reservation framework. Signed-off-by: Mark Rutland Acked-by: Jamie Iles Acked-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 87942b9..de6b1b0 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -34,13 +34,13 @@ static int __devinit pmu_register(struct platform_device *pdev, return -EINVAL; } - if (pmu_devices[type]) - pr_warning("registering new PMU device type %d overwrites " - "previous registration!\n", type); - else - pr_info("registered new PMU device of type %d\n", - type); + if (pmu_devices[type]) { + pr_warning("rejecting duplicate registration of PMU device " + "type %d.", type); + return -ENOSPC; + } + pr_info("registered new PMU device of type %d\n", type); pmu_devices[type] = pdev; return 0; } -- cgit v0.10.2 From e73c34c3d522a60d9f7b38a7683076362bad98f5 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 22 Jun 2011 15:33:55 +0100 Subject: ARM: 6976/1: pmu: add OF probing support This is based on an earlier patch from Rob Herring > Add OF match table to enable OF style driver binding. The dts entry is like > this: > > pmu { > compatible = "arm,cortex-a9-pmu"; > interrupts = <100 101>; > }; > > The use of pdev->id as an index breaks with OF device binding, so set the type > based on the OF compatible string. This modification sets the PMU hardware type based on data embedded in the binding, allowing easy addition of new PMU types in future. Support for new PMU types not provided by devicetree can be added later using platform_device_id tables in a similar fashion. Signed-off-by: Mark Rutland Acked-by: Jamie Iles Acked-by: Rob Herring Cc: Will Deacon Signed-off-by: Russell King diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt new file mode 100644 index 0000000..1c044eb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -0,0 +1,21 @@ +* ARM Performance Monitor Units + +ARM cores often have a PMU for counting cpu and cache events like cache misses +and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU +representation in the device tree should be done as under:- + +Required properties: + +- compatible : should be one of + "arm,cortex-a9-pmu" + "arm,cortex-a8-pmu" + "arm,arm1176-pmu" + "arm,arm1136-pmu" +- interrupts : 1 combined interrupt or 1 per core. + +Example: + +pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <100 101>; +}; diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index de6b1b0..2ce00be 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -45,14 +46,45 @@ static int __devinit pmu_register(struct platform_device *pdev, return 0; } +#define OF_MATCH_PMU(_name, _type) { \ + .compatible = _name, \ + .data = (void *)_type, \ +} + +#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU) + +static struct of_device_id armpmu_of_device_ids[] = { + OF_MATCH_CPU("arm,cortex-a9-pmu"), + OF_MATCH_CPU("arm,cortex-a8-pmu"), + OF_MATCH_CPU("arm,arm1136-pmu"), + OF_MATCH_CPU("arm,arm1176-pmu"), + {}, +}; + +enum arm_pmu_type armpmu_device_type(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + + /* provided by of_device_id table */ + if (pdev->dev.of_node) { + of_id = of_match_device(armpmu_of_device_ids, &pdev->dev); + BUG_ON(!of_id); + return (enum arm_pmu_type)of_id->data; + } + + /* Provided by a 'legacy' platform_device */ + return ARM_PMU_DEVICE_CPU; +} + static int __devinit armpmu_device_probe(struct platform_device *pdev) { - return pmu_register(pdev, ARM_PMU_DEVICE_CPU); + return pmu_register(pdev, armpmu_device_type(pdev)); } static struct platform_driver armpmu_driver = { .driver = { .name = "arm-pmu", + .of_match_table = armpmu_of_device_ids, }, .probe = armpmu_device_probe, }; -- cgit v0.10.2 From e4b6381009d740bd3a97e6b841d8efe7fc70c1b7 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Wed, 22 Jun 2011 15:34:56 +0100 Subject: ARM: 6977/1: pmu: add platform_device_id table support This patch adds support for platform_device_id tables, allowing new PMU types to be registered with the correct type, without requiring new platform_driver shims to provide the type. An single entry for existing devices is provided. Macros matching functionality of the of_device_id table macros are provided for convenience. Signed-off-by: Mark Rutland Acked-by: Jamie Iles Cc: Rob Herring Cc: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2ce00be..2b70709 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -61,9 +61,22 @@ static struct of_device_id armpmu_of_device_ids[] = { {}, }; +#define PLAT_MATCH_PMU(_name, _type) { \ + .name = _name, \ + .driver_data = _type, \ +} + +#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU) + +static struct platform_device_id armpmu_plat_device_ids[] = { + PLAT_MATCH_CPU("arm-pmu"), + {}, +}; + enum arm_pmu_type armpmu_device_type(struct platform_device *pdev) { const struct of_device_id *of_id; + const struct platform_device_id *pdev_id; /* provided by of_device_id table */ if (pdev->dev.of_node) { @@ -72,8 +85,10 @@ enum arm_pmu_type armpmu_device_type(struct platform_device *pdev) return (enum arm_pmu_type)of_id->data; } - /* Provided by a 'legacy' platform_device */ - return ARM_PMU_DEVICE_CPU; + /* Provided by platform_device_id table */ + pdev_id = platform_get_device_id(pdev); + BUG_ON(!pdev_id); + return pdev_id->driver_data; } static int __devinit armpmu_device_probe(struct platform_device *pdev) @@ -87,6 +102,7 @@ static struct platform_driver armpmu_driver = { .of_match_table = armpmu_of_device_ids, }, .probe = armpmu_device_probe, + .id_table = armpmu_plat_device_ids, }; static int __init register_pmu_driver(void) -- cgit v0.10.2 From 9b640f2e154268cb516efcaf9c434f2e73c6783e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 29 Jun 2011 11:36:10 +0200 Subject: i2c-taos-evm: Fix log messages * Print all error and information messages even when debugging is disabled. * Don't use adapter device to log messages before it is ready. Signed-off-by: Jean Delvare Cc: stable@kernel.org diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index dd39c1e..26c352a 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -234,7 +234,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) if (taos->state != TAOS_STATE_IDLE) { err = -ENODEV; - dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, " + dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, " "pos=%d)\n", taos->state, taos->pos); goto exit_close; } @@ -255,7 +255,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) msecs_to_jiffies(250)); if (taos->state != TAOS_STATE_IDLE) { err = -ENODEV; - dev_err(&adapter->dev, "Echo off failed " + dev_err(&serio->dev, "TAOS EVM echo off failed " "(state=%d)\n", taos->state); goto exit_close; } @@ -263,7 +263,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) err = i2c_add_adapter(adapter); if (err) goto exit_close; - dev_dbg(&serio->dev, "Connected to TAOS EVM\n"); + dev_info(&serio->dev, "Connected to TAOS EVM\n"); taos->client = taos_instantiate_device(adapter); return 0; @@ -288,7 +288,7 @@ static void taos_disconnect(struct serio *serio) serio_set_drvdata(serio, NULL); kfree(taos); - dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n"); + dev_info(&serio->dev, "Disconnected from TAOS EVM\n"); } static struct serio_device_id taos_serio_ids[] = { -- cgit v0.10.2 From cd823db8b1161ef0d756514d280715a576d65cc3 Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Wed, 29 Jun 2011 11:36:11 +0200 Subject: i2c/pca954x: Initialize the mux to disconnected state pca954x power-on default is channel 0 connected. If multiple pca954x muxes are connected to the same physical I2C bus, the parent bus will see channel 0 devices behind both muxes by default. This is bad. Scenario: -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50 | I2C-bus-1 --- | -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50 1. Load I2C bus driver: creates I2C-bus-1 2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111 3. Load eeprom driver 4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default. Fix: Initialize pca954x to disconnected state in pca954x_probe() Signed-off-by: Petri Gynther Signed-off-by: Jean Delvare Cc: stable@kernel.org diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c index 54e1ce7..6f89536 100644 --- a/drivers/i2c/muxes/pca954x.c +++ b/drivers/i2c/muxes/pca954x.c @@ -201,10 +201,11 @@ static int pca954x_probe(struct i2c_client *client, i2c_set_clientdata(client, data); - /* Read the mux register at addr to verify - * that the mux is in fact present. + /* Write the mux register at addr to verify + * that the mux is in fact present. This also + * initializes the mux to disconnected state. */ - if (i2c_smbus_read_byte(client) < 0) { + if (i2c_smbus_write_byte(client, 0) < 0) { dev_warn(&client->dev, "probe failed\n"); goto exit_free; } -- cgit v0.10.2 From ed6e4ef836d425bc35e33bf20fcec95e68203afa Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Sat, 18 Jun 2011 07:53:59 +0000 Subject: netfilter: Fix ip_route_me_harder triggering ip_rt_bug Avoid creating input routes with ip_route_me_harder. It does not work for locally generated packets. Instead, restrict sockets to provide valid saddr for output route (or unicast saddr for transparent proxy). For other traffic allow saddr to be unicast or local but if callers forget to check saddr type use 0 for the output route. The resulting handling should be: - REJECT TCP: - in INPUT we can provide addr_type = RTN_LOCAL but better allow rejecting traffic delivered with local route (no IP address => use RTN_UNSPEC to allow also RTN_UNICAST). - FORWARD: RTN_UNSPEC => allow RTN_LOCAL/RTN_UNICAST saddr, add fix to ignore RTN_BROADCAST and RTN_MULTICAST - OUTPUT: RTN_UNSPEC - NAT, mangle, ip_queue, nf_ip_reroute: RTN_UNSPEC in LOCAL_OUT - IPVS: - use RTN_LOCAL in LOCAL_OUT and FORWARD after SNAT to restrict saddr to be local Signed-off-by: Julian Anastasov Signed-off-by: David S. Miller diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c index 4614bab..2e97e3e 100644 --- a/net/ipv4/netfilter.c +++ b/net/ipv4/netfilter.c @@ -17,51 +17,35 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type) const struct iphdr *iph = ip_hdr(skb); struct rtable *rt; struct flowi4 fl4 = {}; - unsigned long orefdst; + __be32 saddr = iph->saddr; + __u8 flags = 0; unsigned int hh_len; - unsigned int type; - type = inet_addr_type(net, iph->saddr); - if (skb->sk && inet_sk(skb->sk)->transparent) - type = RTN_LOCAL; - if (addr_type == RTN_UNSPEC) - addr_type = type; + if (!skb->sk && addr_type != RTN_LOCAL) { + if (addr_type == RTN_UNSPEC) + addr_type = inet_addr_type(net, saddr); + if (addr_type == RTN_LOCAL || addr_type == RTN_UNICAST) + flags |= FLOWI_FLAG_ANYSRC; + else + saddr = 0; + } /* some non-standard hacks like ipt_REJECT.c:send_reset() can cause * packets with foreign saddr to appear on the NF_INET_LOCAL_OUT hook. */ - if (addr_type == RTN_LOCAL) { - fl4.daddr = iph->daddr; - if (type == RTN_LOCAL) - fl4.saddr = iph->saddr; - fl4.flowi4_tos = RT_TOS(iph->tos); - fl4.flowi4_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0; - fl4.flowi4_mark = skb->mark; - fl4.flowi4_flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : 0; - rt = ip_route_output_key(net, &fl4); - if (IS_ERR(rt)) - return -1; - - /* Drop old route. */ - skb_dst_drop(skb); - skb_dst_set(skb, &rt->dst); - } else { - /* non-local src, find valid iif to satisfy - * rp-filter when calling ip_route_input. */ - fl4.daddr = iph->saddr; - rt = ip_route_output_key(net, &fl4); - if (IS_ERR(rt)) - return -1; + fl4.daddr = iph->daddr; + fl4.saddr = saddr; + fl4.flowi4_tos = RT_TOS(iph->tos); + fl4.flowi4_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0; + fl4.flowi4_mark = skb->mark; + fl4.flowi4_flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : flags; + rt = ip_route_output_key(net, &fl4); + if (IS_ERR(rt)) + return -1; - orefdst = skb->_skb_refdst; - if (ip_route_input(skb, iph->daddr, iph->saddr, - RT_TOS(iph->tos), rt->dst.dev) != 0) { - dst_release(&rt->dst); - return -1; - } - dst_release(&rt->dst); - refdst_drop(orefdst); - } + /* Drop old route. */ + skb_dst_drop(skb); + skb_dst_set(skb, &rt->dst); if (skb_dst(skb)->error) return -1; diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c index 1ff79e5..51f13f8 100644 --- a/net/ipv4/netfilter/ipt_REJECT.c +++ b/net/ipv4/netfilter/ipt_REJECT.c @@ -40,7 +40,6 @@ static void send_reset(struct sk_buff *oldskb, int hook) struct iphdr *niph; const struct tcphdr *oth; struct tcphdr _otcph, *tcph; - unsigned int addr_type; /* IP header checks: fragment. */ if (ip_hdr(oldskb)->frag_off & htons(IP_OFFSET)) @@ -55,6 +54,9 @@ static void send_reset(struct sk_buff *oldskb, int hook) if (oth->rst) return; + if (skb_rtable(oldskb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST)) + return; + /* Check checksum */ if (nf_ip_checksum(oldskb, hook, ip_hdrlen(oldskb), IPPROTO_TCP)) return; @@ -101,19 +103,11 @@ static void send_reset(struct sk_buff *oldskb, int hook) nskb->csum_start = (unsigned char *)tcph - nskb->head; nskb->csum_offset = offsetof(struct tcphdr, check); - addr_type = RTN_UNSPEC; - if (hook != NF_INET_FORWARD -#ifdef CONFIG_BRIDGE_NETFILTER - || (nskb->nf_bridge && nskb->nf_bridge->mask & BRNF_BRIDGED) -#endif - ) - addr_type = RTN_LOCAL; - /* ip_route_me_harder expects skb->dst to be set */ skb_dst_set_noref(nskb, skb_dst(oldskb)); nskb->protocol = htons(ETH_P_IP); - if (ip_route_me_harder(nskb, addr_type)) + if (ip_route_me_harder(nskb, RTN_UNSPEC)) goto free_nskb; niph->ttl = ip4_dst_hoplimit(skb_dst(nskb)); -- cgit v0.10.2 From 7ab24bfdf9a9a9f87ac8e5ad9a25f80b5b947be7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 29 Jun 2011 05:48:41 -0700 Subject: net+crypto: Use vmalloc for zlib inflate buffers. They are 64K and result in order-4 allocations, even with SLUB. Therefore, just like we always have for the deflate buffers, use vmalloc. Reported-by: Martin Jackson Acked-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/crypto/deflate.c b/crypto/deflate.c index b5ccae2..b0165ec 100644 --- a/crypto/deflate.c +++ b/crypto/deflate.c @@ -32,7 +32,6 @@ #include #include #include -#include #define DEFLATE_DEF_LEVEL Z_DEFAULT_COMPRESSION #define DEFLATE_DEF_WINBITS 11 @@ -73,7 +72,7 @@ static int deflate_decomp_init(struct deflate_ctx *ctx) int ret = 0; struct z_stream_s *stream = &ctx->decomp_stream; - stream->workspace = kzalloc(zlib_inflate_workspacesize(), GFP_KERNEL); + stream->workspace = vzalloc(zlib_inflate_workspacesize()); if (!stream->workspace) { ret = -ENOMEM; goto out; @@ -86,7 +85,7 @@ static int deflate_decomp_init(struct deflate_ctx *ctx) out: return ret; out_free: - kfree(stream->workspace); + vfree(stream->workspace); goto out; } @@ -99,7 +98,7 @@ static void deflate_comp_exit(struct deflate_ctx *ctx) static void deflate_decomp_exit(struct deflate_ctx *ctx) { zlib_inflateEnd(&ctx->decomp_stream); - kfree(ctx->decomp_stream.workspace); + vfree(ctx->decomp_stream.workspace); } static int deflate_init(struct crypto_tfm *tfm) diff --git a/crypto/zlib.c b/crypto/zlib.c index d11d761..06b62e5 100644 --- a/crypto/zlib.c +++ b/crypto/zlib.c @@ -29,7 +29,6 @@ #include #include #include -#include #include @@ -60,7 +59,7 @@ static void zlib_decomp_exit(struct zlib_ctx *ctx) if (stream->workspace) { zlib_inflateEnd(stream); - kfree(stream->workspace); + vfree(stream->workspace); stream->workspace = NULL; } } @@ -228,13 +227,13 @@ static int zlib_decompress_setup(struct crypto_pcomp *tfm, void *params, ? nla_get_u32(tb[ZLIB_DECOMP_WINDOWBITS]) : DEF_WBITS; - stream->workspace = kzalloc(zlib_inflate_workspacesize(), GFP_KERNEL); + stream->workspace = vzalloc(zlib_inflate_workspacesize()); if (!stream->workspace) return -ENOMEM; ret = zlib_inflateInit2(stream, ctx->decomp_windowBits); if (ret != Z_OK) { - kfree(stream->workspace); + vfree(stream->workspace); stream->workspace = NULL; return -EINVAL; } diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 4b70311..74be989 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -49,6 +49,7 @@ #include #include #include +#include #define BNX2X_MAIN #include "bnx2x.h" @@ -4537,8 +4538,7 @@ static int bnx2x_gunzip_init(struct bnx2x *bp) if (bp->strm == NULL) goto gunzip_nomem2; - bp->strm->workspace = kmalloc(zlib_inflate_workspacesize(), - GFP_KERNEL); + bp->strm->workspace = vmalloc(zlib_inflate_workspacesize()); if (bp->strm->workspace == NULL) goto gunzip_nomem3; @@ -4562,7 +4562,7 @@ gunzip_nomem1: static void bnx2x_gunzip_end(struct bnx2x *bp) { if (bp->strm) { - kfree(bp->strm->workspace); + vfree(bp->strm->workspace); kfree(bp->strm); bp->strm = NULL; } diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp_deflate.c index 31e9407..1dbdf82 100644 --- a/drivers/net/ppp_deflate.c +++ b/drivers/net/ppp_deflate.c @@ -305,7 +305,7 @@ static void z_decomp_free(void *arg) if (state) { zlib_inflateEnd(&state->strm); - kfree(state->strm.workspace); + vfree(state->strm.workspace); kfree(state); } } @@ -345,8 +345,7 @@ static void *z_decomp_alloc(unsigned char *options, int opt_len) state->w_size = w_size; state->strm.next_out = NULL; - state->strm.workspace = kmalloc(zlib_inflate_workspacesize(), - GFP_KERNEL|__GFP_REPEAT); + state->strm.workspace = vmalloc(zlib_inflate_workspacesize()); if (state->strm.workspace == NULL) goto out_free; -- cgit v0.10.2 From 55caa9241ece1c07a930e3d05a624061adcf2653 Mon Sep 17 00:00:00 2001 From: Yinglin Luan Date: Sat, 25 Jun 2011 18:12:12 +0000 Subject: rionet: fix NULL pointer dereference in rionet_remove Function rionet_remove initializes local variable 'ndev' to NULL and do nothing changes before the call to unregister_netdev(ndev), this could cause a NULL pointer dereference. Reported-by: Jesper Juhl Signed-off-by: Yinglin Luan Signed-off-by: David S. Miller diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index 77c5092..5d3436d 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -378,7 +378,7 @@ static int rionet_close(struct net_device *ndev) static void rionet_remove(struct rio_dev *rdev) { - struct net_device *ndev = NULL; + struct net_device *ndev = rio_get_drvdata(rdev); struct rionet_peer *peer, *tmp; free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ? @@ -433,22 +433,12 @@ static const struct net_device_ops rionet_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; -static int rionet_setup_netdev(struct rio_mport *mport) +static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev) { int rc = 0; - struct net_device *ndev = NULL; struct rionet_private *rnet; u16 device_id; - /* Allocate our net_device structure */ - ndev = alloc_etherdev(sizeof(struct rionet_private)); - if (ndev == NULL) { - printk(KERN_INFO "%s: could not allocate ethernet device.\n", - DRV_NAME); - rc = -ENOMEM; - goto out; - } - rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL, mport->sys_size ? __fls(sizeof(void *)) + 4 : 0); if (!rionet_active) { @@ -504,11 +494,21 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) int rc = -ENODEV; u32 lpef, lsrc_ops, ldst_ops; struct rionet_peer *peer; + struct net_device *ndev = NULL; /* If local device is not rionet capable, give up quickly */ if (!rionet_capable) goto out; + /* Allocate our net_device structure */ + ndev = alloc_etherdev(sizeof(struct rionet_private)); + if (ndev == NULL) { + printk(KERN_INFO "%s: could not allocate ethernet device.\n", + DRV_NAME); + rc = -ENOMEM; + goto out; + } + /* * First time through, make sure local device is rionet * capable, setup netdev, and set flags so this is skipped @@ -529,7 +529,7 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) goto out; } - rc = rionet_setup_netdev(rdev->net->hport); + rc = rionet_setup_netdev(rdev->net->hport, ndev); rionet_check = 1; } @@ -546,6 +546,8 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) list_add_tail(&peer->node, &rionet_peers); } + rio_set_drvdata(rdev, ndev); + out: return rc; } -- cgit v0.10.2 From a30d5155a4f80af3cbe1fe0366e9f0c6fdbfd8dd Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sun, 26 Jun 2011 21:39:51 +0000 Subject: net/can: activate bit-timing calculation and netlink based drivers by default The two options "CAN bit-timing calculation" and "Platform CAN drivers with Netlink support" have a "default Y". In order to activate them by default, change to "default y". Signed-off-by: Marc Kleine-Budde Acked-by: Wolfgang Grandegger Acked-by: Kurt Van Dijck Signed-off-by: David S. Miller diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 1d699e3..754df5e 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -36,7 +36,7 @@ config CAN_SLCAN config CAN_DEV tristate "Platform CAN drivers with Netlink support" depends on CAN - default Y + default y ---help--- Enables the common framework for platform CAN drivers with Netlink support. This is the standard library for CAN drivers. @@ -45,7 +45,7 @@ config CAN_DEV config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" depends on CAN_DEV - default Y + default y ---help--- If enabled, CAN bit-timing parameters will be calculated for the bit-rate specified via Netlink argument "bitrate" when the device -- cgit v0.10.2 From 1a8690aa50a00670f254282a92caf1401bd30528 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 27 Jun 2011 08:24:07 +0000 Subject: MAINTAINERS: drop Michael from bfin_mac driver We want people to just use the list now rather than hitting up people who are no longer responsible for it. Signed-off-by: Mike Frysinger Acked-by: Michael Hennerich Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 05aaf92..1d22afe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1422,7 +1422,6 @@ S: Supported F: arch/blackfin/ BLACKFIN EMAC DRIVER -M: Michael Hennerich L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported -- cgit v0.10.2 From 16adf5d07987d93675945f3cecf0e33706566005 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Fri, 17 Jun 2011 20:02:10 -0400 Subject: usbnet: Remove over-broad module alias from zaurus. This module and a bunch of dependancies are getting loaded on several of laptops I have (probably picking up the mobile broadband device), that have nothing to do with zaurus. Matching by class without any vendor/device pair isn't the right thing to do here, as it will prevent any other driver from correctly binding to it. (Or in the absense of a driver, will just waste time & memory by unnecessarily loading modules) Signed-off-by: Dave Jones Signed-off-by: David S. Miller diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index 241756e..1a2234c 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -331,17 +331,7 @@ static const struct usb_device_id products [] = { ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, - - -/* At least some of the newest PXA units have very different lies about - * their standards support: they claim to be cell phones offering - * direct access to their radios! (No, they don't conform to CDC MDLM.) - */ { - USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, - USB_CDC_PROTO_NONE), - .driver_info = (unsigned long) &bogus_mdlm_info, -}, { /* Motorola MOTOMAGX phones */ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), -- cgit v0.10.2 From 140fe3b1ab9c082182ef13359fab4ddba95c24c3 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Tue, 21 Jun 2011 10:35:55 +0800 Subject: jump_label: Fix jump_label update for modules The jump labels entries for modules do not stop at __stop__jump_table, but after mod->jump_entries + mod_num_jump_entries. By checking the wrong end point, module trace events never get enabled. Cc: Ingo Molnar Acked-by: Jason Baron Tested-by: Avi Kivity Tested-by: Johannes Berg Signed-off-by: Xiao Guangrong Link: http://lkml.kernel.org/r/4E00038B.2060404@cn.fujitsu.com Signed-off-by: Steven Rostedt diff --git a/kernel/jump_label.c b/kernel/jump_label.c index fa27e75..a8ce450 100644 --- a/kernel/jump_label.c +++ b/kernel/jump_label.c @@ -375,15 +375,19 @@ int jump_label_text_reserved(void *start, void *end) static void jump_label_update(struct jump_label_key *key, int enable) { - struct jump_entry *entry = key->entries; - - /* if there are no users, entry can be NULL */ - if (entry) - __jump_label_update(key, entry, __stop___jump_table, enable); + struct jump_entry *entry = key->entries, *stop = __stop___jump_table; #ifdef CONFIG_MODULES + struct module *mod = __module_address((jump_label_t)key); + __jump_label_mod_update(key, enable); + + if (mod) + stop = mod->jump_entries + mod->num_jump_entries; #endif + /* if there are no users, entry can be NULL */ + if (entry) + __jump_label_update(key, entry, stop, enable); } #endif -- cgit v0.10.2 From e999dc50404d401150a5429b6459473a691fd1a0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Jun 2011 12:14:07 +0100 Subject: ASoC: Fix Blackfin I2S _pointer() implementation return in bounds values The Blackfin DMA controller can report one frame beyond the end of the buffer in the wraparound case but ALSA requires that the pointer always be in the buffer. Do the wraparound to handle this. A similar bug is likely to apply to the other Blackfin PCM drivers but the code is less obvious to inspection and I don't have a user to test. Reported-by: Kieran O'Leary Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/blackfin/bf5xx-i2s-pcm.c b/sound/soc/blackfin/bf5xx-i2s-pcm.c index b5101ef..f1fd95b 100644 --- a/sound/soc/blackfin/bf5xx-i2s-pcm.c +++ b/sound/soc/blackfin/bf5xx-i2s-pcm.c @@ -138,11 +138,20 @@ static snd_pcm_uframes_t bf5xx_pcm_pointer(struct snd_pcm_substream *substream) pr_debug("%s enter\n", __func__); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { diff = sport_curr_offset_tx(sport); - frames = bytes_to_frames(substream->runtime, diff); } else { diff = sport_curr_offset_rx(sport); - frames = bytes_to_frames(substream->runtime, diff); } + + /* + * TX at least can report one frame beyond the end of the + * buffer if we hit the wraparound case - clamp to within the + * buffer as the ALSA APIs require. + */ + if (diff == snd_pcm_lib_buffer_bytes(substream)) + diff = 0; + + frames = bytes_to_frames(substream->runtime, diff); + return frames; } -- cgit v0.10.2 From 38553564dc1052640515ed86be3ccb76cda6eee7 Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 3 Jun 2011 08:23:20 -0500 Subject: [SCSI] ibmvfc: Fix Virtual I/O failover hang If a Virtual I/O server fails in a dual virtual I/O server multipath configuration, ensure we delete all remote ports so that path failover can occur. For a single path configuration, the remote ports will go into devloss state. Signed-off-by: Brian King Signed-off-by: James Bottomley diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index b765061..bdfa223 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -4306,8 +4306,8 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost) spin_lock_irqsave(vhost->host->host_lock, flags); if (rc == H_CLOSED) vio_enable_interrupts(to_vio_dev(vhost->dev)); - else if (rc || (rc = ibmvfc_send_crq_init(vhost)) || - (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) { + if (rc || (rc = ibmvfc_send_crq_init(vhost)) || + (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) { ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD); dev_err(vhost->dev, "Error after reset (rc=%d)\n", rc); } -- cgit v0.10.2 From c2dd32e02648d77466f320d6edd157b5080e7c99 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 3 Jun 2011 09:57:29 -0500 Subject: [SCSI] hpsa: fix dma unmap error in hpsa_passthru_ioctl Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index c6c0434..a75122d 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -2580,7 +2580,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) c->SG[0].Ext = 0; /* we are not chaining*/ } hpsa_scsi_do_simple_cmd_core(h, c); - hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); + if (iocommand.buf_size > 0) + hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); check_ioctl_unit_attention(h, c); /* Copy the error information out */ -- cgit v0.10.2 From db111e18ec19bbadbf44a60f73bf2ff5991dc915 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 3 Jun 2011 09:57:34 -0500 Subject: [SCSI] hpsa: fix potential overrun while memcpy'ing sense data This memcpy: memcpy(cmd->sense_buffer, ei->SenseInfo, ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? SCSI_SENSE_BUFFERSIZE : ei->SenseLen); The ei->SenseLen field is filled in by the Smart Array. For requests to logical drives, it will not exceed 32 bytes, so should be ok, but for physical requests it depends on the target device, not the Smart Array. It's conceivable that this could exceed the 32 byte size of ei->SenseInfo. In that case, the memcpy would read past the end of ei->SenseInfo, copying data from the next command, as if it were sense data, or, if it happened to be the very last command in the block of allocated commands, could fall off the end of the allocated area and crash. I'm not aware of anyone ever encountering this behavior, but it could conceivably happen. This bug was found by Coverity. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index a75122d..6bba23a 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1037,6 +1037,7 @@ static void complete_scsi_command(struct CommandList *cp) unsigned char sense_key; unsigned char asc; /* additional sense code */ unsigned char ascq; /* additional sense code qualifier */ + unsigned long sense_data_size; ei = cp->err_info; cmd = (struct scsi_cmnd *) cp->scsi_cmd; @@ -1051,10 +1052,14 @@ static void complete_scsi_command(struct CommandList *cp) cmd->result |= ei->ScsiStatus; /* copy the sense data whether we need to or not. */ - memcpy(cmd->sense_buffer, ei->SenseInfo, - ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? - SCSI_SENSE_BUFFERSIZE : - ei->SenseLen); + if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo)) + sense_data_size = SCSI_SENSE_BUFFERSIZE; + else + sense_data_size = sizeof(ei->SenseInfo); + if (ei->SenseLen < sense_data_size) + sense_data_size = ei->SenseLen; + + memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size); scsi_set_resid(cmd, ei->ResidualCnt); if (ei->CommandStatus == 0) { -- cgit v0.10.2 From 49743170556e13156a64f8f20fa412805771b4e1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 29 Jun 2011 10:10:07 -0700 Subject: ahci: change 'masking port_map' printk to KERN_WARNING level It's not so much an error as a warning about normal Marvell crazines. So don't use KERN_ERR that ends up spamming the console even in quiet mode, it's not _that_ critical. Explained by Jeff: "Long explanation, it's a mess: Marvell took standard AHCI, and bastardized it to include a weird mode whereby PATA devices appear inside the AHCI DMA and interrupt infrastructure you're familiar with. So, PATA devices appear via pata_marvell driver, using basic legacy IDE programming interface. But SATA devices, which might also be attached to this chip, either work in under-performing mode or simply don't work at all (e.g. newer 6 Gbps devices or port multiplier attachments, NCQ, ...) On the other hand, 'ahci' driver loads and works with the chip's attached SATA devices quite beautifully, but is completely unable to drive any attached PATA devices, due to the Marvell-specific PATA-under-AHCI interface. The "masking port_map 0x7 -> 0x3" message is the ahci driver "hiding" the PATA port(s) from itself, making sure it will only drive the SATA ports it knows how to drive." Acked-by: Jeff Garzik Signed-off-by: Linus Torvalds diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index d38c40f..41223c7 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -452,7 +452,7 @@ void ahci_save_initial_config(struct device *dev, } if (mask_port_map) { - dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n", + dev_printk(KERN_WARNING, dev, "masking port_map 0x%x -> 0x%x\n", port_map, port_map & mask_port_map); port_map &= mask_port_map; -- cgit v0.10.2 From 46e130d298a384b677426e19faec311749ff2677 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Wed, 29 Jun 2011 18:40:23 +0200 Subject: ARM: pm: omap3: run the ASM sleep code from DDR Most of the ASM sleep code (in arch/arm/mach-omap2/sleep34xx.S) is copied to internal SRAM at boot and after wake-up from CORE OFF mode. However only a small part of the code really needs to run from internal SRAM. This fix lets most of the ASM idle code run from the DDR in order to minimize the SRAM usage and the overhead in the code copy. The only pieces of code that are mandatory in SRAM are: - the i443 erratum WA, - the i581 erratum WA, - the security extension code. SRAM usage: - original code: . 560 bytes for omap3_sram_configure_core_dpll (used by DVFS), . 852 bytes for omap_sram_idle (used by suspend/resume in RETention), . 124 bytes for es3_sdrc_fix (used by suspend/resume in OFF mode on ES3.x), . 108 bytes for save_secure_ram_context (used on HS parts only). With this fix the usage for suspend/resume in RETention goes down 288 bytes, so the gain in SRAM usage for suspend/resume is 564 bytes. Also fixed the SRAM initialization sequence to avoid an unnecessary copy to SRAM at boot time and for readability. Tested on Beagleboard (ES2.x) in idle with full RET and OFF modes. Kevin Hilman tested retention and off on 3430/n900, 3530/Overo and 3630/Zoom3 Signed-off-by: Jean Pihet Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 45bcfce..a4ec213 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -88,18 +88,28 @@ extern int pm_dbg_regset_init(int reg_set); #define pm_dbg_regset_init(reg_set) do {} while (0); #endif /* CONFIG_PM_DEBUG */ +/* 24xx */ extern void omap24xx_idle_loop_suspend(void); +extern unsigned int omap24xx_idle_loop_suspend_sz; extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); +extern unsigned int omap24xx_cpu_suspend_sz; + +/* 3xxx */ extern void omap34xx_cpu_suspend(u32 *addr, int save_state); -extern int save_secure_ram_context(u32 *addr); -extern void omap3_save_scratchpad_contents(void); -extern unsigned int omap24xx_idle_loop_suspend_sz; +/* omap3_do_wfi function pointer and size, for copy to SRAM */ +extern void omap3_do_wfi(void); +extern unsigned int omap3_do_wfi_sz; +/* ... and its pointer from SRAM after copy */ +extern void (*omap3_do_wfi_sram)(void); + +/* save_secure_ram_context function pointer and size, for copy to SRAM */ +extern int save_secure_ram_context(u32 *addr); extern unsigned int save_secure_ram_context_sz; -extern unsigned int omap24xx_cpu_suspend_sz; -extern unsigned int omap34xx_cpu_suspend_sz; + +extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 3e9a13e..e1c79ba 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -78,9 +78,8 @@ struct power_state { static LIST_HEAD(pwrst_list); -static void (*_omap_sram_idle)(u32 *addr, int save_state); - static int (*_omap_save_secure_sram)(u32 *addr); +void (*omap3_do_wfi_sram)(void); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; @@ -309,7 +308,7 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) static void omap34xx_do_sram_idle(unsigned long save_state) { - _omap_sram_idle(omap3_arm_context, save_state); + omap34xx_cpu_suspend(omap3_arm_context, save_state); } void omap_sram_idle(void) @@ -328,9 +327,6 @@ void omap_sram_idle(void) int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - if (!_omap_sram_idle) - return; - pwrdm_clear_all_prev_pwrst(mpu_pwrdm); pwrdm_clear_all_prev_pwrst(neon_pwrdm); pwrdm_clear_all_prev_pwrst(core_pwrdm); @@ -826,10 +822,17 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } +/* + * Push functions to SRAM + * + * The minimum set of functions is pushed to SRAM for execution: + * - omap3_do_wfi for erratum i581 WA, + * - save_secure_ram_context for security extensions. + */ void omap_push_sram_idle(void) { - _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, - omap34xx_cpu_suspend_sz); + omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz); + if (omap_type() != OMAP2_DEVICE_TYPE_GP) _omap_save_secure_sram = omap_sram_push(save_secure_ram_context, save_secure_ram_context_sz); @@ -894,7 +897,6 @@ static int __init omap3_pm_init(void) per_clkdm = clkdm_lookup("per_clkdm"); core_clkdm = clkdm_lookup("core_clkdm"); - omap_push_sram_idle(); #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index d18f52e..17dbc5a 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -139,8 +139,10 @@ ENTRY(save_secure_ram_context_sz) * * * Notes: - * - this code gets copied to internal SRAM at boot and after wake-up - * from OFF mode. The execution pointer in SRAM is _omap_sram_idle. + * - only the minimum set of functions gets copied to internal SRAM at boot + * and after wake-up from OFF mode, cf. omap_push_sram_idle. The function + * pointers in SDRAM or SRAM are called depending on the desired low power + * target state. * - when the OMAP wakes up it continues at different execution points * depending on the low power mode (non-OFF vs OFF modes), * cf. 'Resume path for xxx mode' comments. @@ -158,9 +160,15 @@ ENTRY(omap34xx_cpu_suspend) * 3 - Both L1 and L2 lost and logic lost */ - /* Directly jump to WFI is the context save is not required */ - cmp r1, #0x0 - beq omap3_do_wfi + /* + * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi) + * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram) + */ + ldr r4, omap3_do_wfi_sram_addr + ldr r5, [r4] + cmp r1, #0x0 @ If no context save required, + bxeq r5 @ jump to the WFI code in SRAM + /* Otherwise fall through to the save context code */ save_context_wfi: @@ -213,7 +221,32 @@ save_context_wfi: THUMB( nop ) .arm -omap3_do_wfi: + b omap3_do_wfi + +/* + * Local variables + */ +omap3_do_wfi_sram_addr: + .word omap3_do_wfi_sram +kernel_flush: + .word v7_flush_dcache_all + +/* =================================== + * == WFI instruction => Enter idle == + * =================================== + */ + +/* + * Do WFI instruction + * Includes the resume path for non-OFF modes + * + * This code gets copied to internal SRAM and is accessible + * from both SDRAM and SRAM: + * - executed from SRAM for non-off modes (omap3_do_wfi_sram), + * - executed from SDRAM for OFF mode (omap3_do_wfi). + */ + .align 3 +ENTRY(omap3_do_wfi) ldr r4, sdrc_power @ read the SDRC_POWER register ldr r5, [r4] @ read the contents of SDRC_POWER orr r5, r5, #0x40 @ enable self refresh on idle req @@ -245,8 +278,86 @@ omap3_do_wfi: nop nop nop - bl wait_sdrc_ok +/* + * This function implements the erratum ID i581 WA: + * SDRC state restore before accessing the SDRAM + * + * Only used at return from non-OFF mode. For OFF + * mode the ROM code configures the SDRC and + * the DPLL before calling the restore code directly + * from DDR. + */ + +/* Make sure SDRC accesses are ok */ +wait_sdrc_ok: + +/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ + ldr r4, cm_idlest_ckgen +wait_dpll3_lock: + ldr r5, [r4] + tst r5, #1 + beq wait_dpll3_lock + + ldr r4, cm_idlest1_core +wait_sdrc_ready: + ldr r5, [r4] + tst r5, #0x2 + bne wait_sdrc_ready + /* allow DLL powerdown upon hw idle req */ + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + +/* + * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a + * base instead. + * Be careful not to clobber r7 when maintaing this code. + */ + +is_dll_in_lock_mode: + /* Is dll in lock mode? */ + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + tst r5, #0x4 + bne exit_nonoff_modes @ Return if locked + /* wait till dll locks */ + adr r7, kick_counter +wait_dll_lock_timed: + ldr r4, wait_dll_lock_counter + add r4, r4, #1 + str r4, [r7, #wait_dll_lock_counter - kick_counter] + ldr r4, sdrc_dlla_status + /* Wait 20uS for lock */ + mov r6, #8 +wait_dll_lock: + subs r6, r6, #0x1 + beq kick_dll + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + b exit_nonoff_modes @ Return when locked + + /* disable/reenable DLL if not locked */ +kick_dll: + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + mov r6, r5 + bic r6, #(1<<3) @ disable dll + str r6, [r4] + dsb + orr r6, r6, #(1<<3) @ enable dll + str r6, [r4] + dsb + ldr r4, kick_counter + add r4, r4, #1 + str r4, [r7] @ kick_counter + b wait_dll_lock_timed + +exit_nonoff_modes: + /* Re-enable C-bit if needed */ mrc p15, 0, r0, c1, c0, 0 tst r0, #(1 << 2) @ Check C bit enabled? orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared @@ -260,6 +371,31 @@ omap3_do_wfi: */ ldmfd sp!, {r4 - r11, pc} @ restore regs and return +/* + * Local variables + */ +sdrc_power: + .word SDRC_POWER_V +cm_idlest1_core: + .word CM_IDLEST1_CORE_V +cm_idlest_ckgen: + .word CM_IDLEST_CKGEN_V +sdrc_dlla_status: + .word SDRC_DLLA_STATUS_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V + /* + * When exporting to userspace while the counters are in SRAM, + * these 2 words need to be at the end to facilitate retrival! + */ +kick_counter: + .word 0 +wait_dll_lock_counter: + .word 0 + +ENTRY(omap3_do_wfi_sz) + .word . - omap3_do_wfi + /* * ============================== @@ -275,13 +411,17 @@ omap3_do_wfi: * restore_es3: applies to 34xx >= ES3.0 * restore_3630: applies to 36xx * restore: common code for 3xxx + * + * Note: when back from CORE and MPU OFF mode we are running + * from SDRAM, without MMU, without the caches and prediction. + * Also the SRAM content has been cleared. */ ENTRY(omap3_restore_es3) ldr r5, pm_prepwstst_core_p ldr r4, [r5] and r4, r4, #0x3 cmp r4, #0x0 @ Check if previous power state of CORE is OFF - bne omap3_restore + bne omap3_restore @ Fall through to OMAP3 common code adr r0, es3_sdrc_fix ldr r1, sram_base ldr r2, es3_sdrc_fix_sz @@ -293,7 +433,7 @@ copy_to_sram: bne copy_to_sram ldr r1, sram_base blx r1 - b omap3_restore + b omap3_restore @ Fall through to OMAP3 common code ENDPROC(omap3_restore_es3) ENTRY(omap3_restore_3630) @@ -301,7 +441,7 @@ ENTRY(omap3_restore_3630) ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if previous power state of CORE is OFF - bne omap3_restore + bne omap3_restore @ Fall through to OMAP3 common code /* Disable RTA before giving control */ ldr r1, control_mem_rta mov r2, #OMAP36XX_RTA_DISABLE @@ -405,10 +545,31 @@ ENDPROC(omap3_restore) .ltorg /* + * Local variables + */ +pm_prepwstst_core_p: + .word PM_PREPWSTST_CORE_P +pm_pwstctrl_mpu: + .word PM_PWSTCTRL_MPU_P +scratchpad_base: + .word SCRATCHPAD_BASE_P +sram_base: + .word SRAM_BASE_P + 0x8000 +control_stat: + .word CONTROL_STAT +control_mem_rta: + .word CONTROL_MEM_RTA_CTRL +l2dis_3630: + .word 0 + +/* * Internal functions */ -/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */ +/* + * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 + * Copied to and run from SRAM in order to reconfigure the SDRC parameters. + */ .text .align 3 ENTRY(es3_sdrc_fix) @@ -438,6 +599,9 @@ ENTRY(es3_sdrc_fix) str r5, [r4] @ kick off refreshes bx lr +/* + * Local variables + */ .align sdrc_syscfg: .word SDRC_SYSCONFIG_P @@ -456,120 +620,3 @@ sdrc_manual_1: ENDPROC(es3_sdrc_fix) ENTRY(es3_sdrc_fix_sz) .word . - es3_sdrc_fix - -/* - * This function implements the erratum ID i581 WA: - * SDRC state restore before accessing the SDRAM - * - * Only used at return from non-OFF mode. For OFF - * mode the ROM code configures the SDRC and - * the DPLL before calling the restore code directly - * from DDR. - */ - -/* Make sure SDRC accesses are ok */ -wait_sdrc_ok: - -/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ - ldr r4, cm_idlest_ckgen -wait_dpll3_lock: - ldr r5, [r4] - tst r5, #1 - beq wait_dpll3_lock - - ldr r4, cm_idlest1_core -wait_sdrc_ready: - ldr r5, [r4] - tst r5, #0x2 - bne wait_sdrc_ready - /* allow DLL powerdown upon hw idle req */ - ldr r4, sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] - -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - -is_dll_in_lock_mode: - /* Is dll in lock mode? */ - ldr r4, sdrc_dlla_ctrl - ldr r5, [r4] - tst r5, #0x4 - bxne lr @ Return if locked - /* wait till dll locks */ - adr r7, kick_counter -wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] - ldr r4, sdrc_dlla_status - /* Wait 20uS for lock */ - mov r6, #8 -wait_dll_lock: - subs r6, r6, #0x1 - beq kick_dll - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x4 - bne wait_dll_lock - bx lr @ Return when locked - - /* disable/reenable DLL if not locked */ -kick_dll: - ldr r4, sdrc_dlla_ctrl - ldr r5, [r4] - mov r6, r5 - bic r6, #(1<<3) @ disable dll - str r6, [r4] - dsb - orr r6, r6, #(1<<3) @ enable dll - str r6, [r4] - dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter - b wait_dll_lock_timed - - .align -cm_idlest1_core: - .word CM_IDLEST1_CORE_V -cm_idlest_ckgen: - .word CM_IDLEST_CKGEN_V -sdrc_dlla_status: - .word SDRC_DLLA_STATUS_V -sdrc_dlla_ctrl: - .word SDRC_DLLA_CTRL_V -pm_prepwstst_core_p: - .word PM_PREPWSTST_CORE_P -pm_pwstctrl_mpu: - .word PM_PWSTCTRL_MPU_P -scratchpad_base: - .word SCRATCHPAD_BASE_P -sram_base: - .word SRAM_BASE_P + 0x8000 -sdrc_power: - .word SDRC_POWER_V -control_stat: - .word CONTROL_STAT -control_mem_rta: - .word CONTROL_MEM_RTA_CTRL -kernel_flush: - .word v7_flush_dcache_all -l2dis_3630: - .word 0 - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 -ENDPROC(omap34xx_cpu_suspend) - -ENTRY(omap34xx_cpu_suspend_sz) - .word . - omap34xx_cpu_suspend diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 6af3d0b..363c91e 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -394,20 +394,15 @@ void omap3_sram_restore_context(void) } #endif /* CONFIG_PM */ -static int __init omap34xx_sram_init(void) -{ - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); - return 0; -} -#else +#endif /* CONFIG_ARCH_OMAP3 */ + static inline int omap34xx_sram_init(void) { +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) + omap3_sram_restore_context(); +#endif return 0; } -#endif int __init omap_sram_init(void) { -- cgit v0.10.2 From d70bed1947772f34d66ada3bd923bfc12ea2452b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 29 Jun 2011 00:30:34 -0700 Subject: drm/i915: Hold struct_mutex during i915_save_state/i915_restore_state Lots of register access in these functions, some of which requires the struct mutex. These functions now hold the struct mutex across the calls to i915_save_display and i915_restore_display, and so the internal mutex calls in those functions have been removed. To ensure that no-one else was calling them (and hence violating the new required locking invarient), those functions have been made static. gen6_enable_rps locks the struct mutex, and so i915_restore_state unlocks the mutex around calls to that function. Reviewed-by: Ben Widawsky Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index eddabf6..1c8bfb1 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -997,8 +997,6 @@ extern unsigned int i915_enable_fbc; extern int i915_suspend(struct drm_device *dev, pm_message_t state); extern int i915_resume(struct drm_device *dev); -extern void i915_save_display(struct drm_device *dev); -extern void i915_restore_display(struct drm_device *dev); extern int i915_master_create(struct drm_device *dev, struct drm_master *master); extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master); diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index e8152d2..5257cfc 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -597,7 +597,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) return; } -void i915_save_display(struct drm_device *dev) +static void i915_save_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -678,7 +678,6 @@ void i915_save_display(struct drm_device *dev) } /* VGA state */ - mutex_lock(&dev->struct_mutex); dev_priv->saveVGA0 = I915_READ(VGA0); dev_priv->saveVGA1 = I915_READ(VGA1); dev_priv->saveVGA_PD = I915_READ(VGA_PD); @@ -688,10 +687,9 @@ void i915_save_display(struct drm_device *dev) dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); i915_save_vga(dev); - mutex_unlock(&dev->struct_mutex); } -void i915_restore_display(struct drm_device *dev) +static void i915_restore_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -783,7 +781,6 @@ void i915_restore_display(struct drm_device *dev) else I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); - mutex_lock(&dev->struct_mutex); I915_WRITE(VGA0, dev_priv->saveVGA0); I915_WRITE(VGA1, dev_priv->saveVGA1); I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); @@ -791,7 +788,6 @@ void i915_restore_display(struct drm_device *dev) udelay(150); i915_restore_vga(dev); - mutex_unlock(&dev->struct_mutex); } int i915_save_state(struct drm_device *dev) @@ -801,6 +797,8 @@ int i915_save_state(struct drm_device *dev) pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + mutex_lock(&dev->struct_mutex); + /* Hardware status page */ dev_priv->saveHWS = I915_READ(HWS_PGA); @@ -840,6 +838,8 @@ int i915_save_state(struct drm_device *dev) for (i = 0; i < 3; i++) dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -850,6 +850,8 @@ int i915_restore_state(struct drm_device *dev) pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + mutex_lock(&dev->struct_mutex); + /* Hardware status page */ I915_WRITE(HWS_PGA, dev_priv->saveHWS); @@ -867,6 +869,7 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(IER, dev_priv->saveIER); I915_WRITE(IMR, dev_priv->saveIMR); } + mutex_unlock(&dev->struct_mutex); intel_init_clock_gating(dev); @@ -878,6 +881,8 @@ int i915_restore_state(struct drm_device *dev) if (IS_GEN6(dev)) gen6_enable_rps(dev_priv); + mutex_lock(&dev->struct_mutex); + /* Cache mode state */ I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000); @@ -891,6 +896,8 @@ int i915_restore_state(struct drm_device *dev) for (i = 0; i < 3; i++) I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]); + mutex_unlock(&dev->struct_mutex); + intel_i2c_reset(dev); return 0; -- cgit v0.10.2 From c31eb8e926835582cd186b33a7a864880a4c0c79 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Tue, 28 Jun 2011 18:21:19 +0530 Subject: ath9k: Fix suspend/resume when no interface is UP When no interface has been brought up, the chip's power state continued as AWAKE. So during resume, the chip never been powered up. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index b8cbfc7..3bad0b2 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -278,6 +278,12 @@ static int ath_pci_suspend(struct device *device) ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); + /* The device has to be moved to FULLSLEEP forcibly. + * Otherwise the chip never moved to full sleep, + * when no interface is up. + */ + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); + return 0; } -- cgit v0.10.2 From a0b8de350be458b33248e48b2174d9af8a4c4798 Mon Sep 17 00:00:00 2001 From: "Eugene A. Shatokhin" Date: Tue, 28 Jun 2011 23:04:51 -0400 Subject: ath5k: fix memory leak when fewer than N_PD_CURVES are in use We would free the proper number of curves, but in the wrong slots, due to a missing level of indirection through the pdgain_idx table. It's simpler just to try to free all four slots, so do that. Cc: stable@kernel.org Signed-off-by: Bob Copeland Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 1fef84f..392771f 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -691,14 +691,12 @@ ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) if (!chinfo[pier].pd_curves) continue; - for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) { struct ath5k_pdgain_info *pd = &chinfo[pier].pd_curves[pdg]; - if (pd != NULL) { - kfree(pd->pd_step); - kfree(pd->pd_pwr); - } + kfree(pd->pd_step); + kfree(pd->pd_pwr); } kfree(chinfo[pier].pd_curves); -- cgit v0.10.2 From dc501fbc4389f6c15a8da14684b5926e0d9553da Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 29 Jun 2011 11:41:51 -0700 Subject: drm/i915: Don't call describe_obj on NULL pointers Reported-by: Pavel Roskin Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38777 Cc: Chris Wilson Signed-off-by: Ben Widawsky Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 4d46441..0a893f7 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1207,13 +1207,17 @@ static int i915_context_status(struct seq_file *m, void *unused) if (ret) return ret; - seq_printf(m, "power context "); - describe_obj(m, dev_priv->pwrctx); - seq_printf(m, "\n"); + if (dev_priv->pwrctx) { + seq_printf(m, "power context "); + describe_obj(m, dev_priv->pwrctx); + seq_printf(m, "\n"); + } - seq_printf(m, "render context "); - describe_obj(m, dev_priv->renderctx); - seq_printf(m, "\n"); + if (dev_priv->renderctx) { + seq_printf(m, "render context "); + describe_obj(m, dev_priv->renderctx); + seq_printf(m, "\n"); + } mutex_unlock(&dev->mode_config.mutex); -- cgit v0.10.2 From a18b989a5c12ca82ed37f94279273ddbc073758a Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Thu, 26 May 2011 13:30:34 +1000 Subject: crypto: caam - fix operator precedence in shared descriptor allocation setkey allocates 16 bytes (CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN) shy of what is needed to store the shared descriptor, resulting in memory corruption. Fix this. Signed-off-by: Kim Phillips Signed-off-by: Herbert Xu diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index d0e65d6..676d957 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -238,9 +238,9 @@ static int build_sh_desc_ipsec(struct caam_ctx *ctx) /* build shared descriptor for this session */ sh_desc = kmalloc(CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN + - keys_fit_inline ? - ctx->split_key_pad_len + ctx->enckeylen : - CAAM_PTR_SZ * 2, GFP_DMA | GFP_KERNEL); + (keys_fit_inline ? + ctx->split_key_pad_len + ctx->enckeylen : + CAAM_PTR_SZ * 2), GFP_DMA | GFP_KERNEL); if (!sh_desc) { dev_err(jrdev, "could not allocate shared descriptor\n"); return -ENOMEM; -- cgit v0.10.2 From b271a988eb9c3944c50fb62c21ac61860090d3ba Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 24 Jun 2011 13:15:38 +0000 Subject: drm/radeon/kms: increase rom size for atrm method The vbios rom is >64k on a lot of modern asics. Increase the fetch size for atrm to make sure we don't miss part of a larger rom. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 1aba85c..3fc5fa1 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -104,7 +104,7 @@ static bool radeon_read_bios(struct radeon_device *rdev) static bool radeon_atrm_get_bios(struct radeon_device *rdev) { int ret; - int size = 64 * 1024; + int size = 256 * 1024; int i; if (!radeon_atrm_supported(rdev->pdev)) -- cgit v0.10.2 From 79d2427338e8da362678de32a1c8af1dc8a9810a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 28 Jun 2011 11:27:47 +0100 Subject: drm/i915/overlay: Fix unpinning along init error paths As pointed out by Dan Carpenter, it was seemingly possible to hit an error whilst mapping the buffer for the regs (except the only likely error returns should not happen during init) and so leak a pin count on the bo. To handle this we would need to reacquire the struct mutex, so for simplicity rearrange for the lock to be held for the entire function. For extra pedagogy, test that we only call init once. Signed-off-by: Chris Wilson Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index 56a8e2a..9e2959b 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -1409,6 +1409,11 @@ void intel_setup_overlay(struct drm_device *dev) overlay = kzalloc(sizeof(struct intel_overlay), GFP_KERNEL); if (!overlay) return; + + mutex_lock(&dev->struct_mutex); + if (WARN_ON(dev_priv->overlay)) + goto out_free; + overlay->dev = dev; reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE); @@ -1416,8 +1421,6 @@ void intel_setup_overlay(struct drm_device *dev) goto out_free; overlay->reg_bo = reg_bo; - mutex_lock(&dev->struct_mutex); - if (OVERLAY_NEEDS_PHYSICAL(dev)) { ret = i915_gem_attach_phys_object(dev, reg_bo, I915_GEM_PHYS_OVERLAY_REGS, @@ -1442,8 +1445,6 @@ void intel_setup_overlay(struct drm_device *dev) } } - mutex_unlock(&dev->struct_mutex); - /* init all values */ overlay->color_key = 0x0101fe; overlay->brightness = -19; @@ -1452,7 +1453,7 @@ void intel_setup_overlay(struct drm_device *dev) regs = intel_overlay_map_regs(overlay); if (!regs) - goto out_free_bo; + goto out_unpin_bo; memset(regs, 0, sizeof(struct overlay_registers)); update_polyphase_filter(regs); @@ -1461,15 +1462,17 @@ void intel_setup_overlay(struct drm_device *dev) intel_overlay_unmap_regs(overlay, regs); dev_priv->overlay = overlay; + mutex_unlock(&dev->struct_mutex); DRM_INFO("initialized overlay support\n"); return; out_unpin_bo: - i915_gem_object_unpin(reg_bo); + if (!OVERLAY_NEEDS_PHYSICAL(dev)) + i915_gem_object_unpin(reg_bo); out_free_bo: drm_gem_object_unreference(®_bo->base); - mutex_unlock(&dev->struct_mutex); out_free: + mutex_unlock(&dev->struct_mutex); kfree(overlay); return; } -- cgit v0.10.2 From f71d4af4cd475aced6d9ec9730b03885ac80b833 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 28 Jun 2011 13:00:41 -0700 Subject: drm/i915: move IRQ function table init to i915_irq.c This lets us make the various IRQ functions static and helps avoid problems like the one fixed in "drm/i915: Use chipset-specific irq installers" where one of the exported functions was called rather than the chipset specific version. This also fixes a UMS-mode bug -- the correct irq functions for IRL and later chips were only getting loaded in the KMS path. Signed-off-by: Jesse Barnes Reviewed-by: Ben Widawsky Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 2b79588..e178702 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1266,30 +1266,6 @@ static int i915_load_modeset_init(struct drm_device *dev) intel_modeset_gem_init(dev); - if (IS_IVYBRIDGE(dev)) { - /* Share pre & uninstall handlers with ILK/SNB */ - dev->driver->irq_handler = ivybridge_irq_handler; - dev->driver->irq_preinstall = ironlake_irq_preinstall; - dev->driver->irq_postinstall = ivybridge_irq_postinstall; - dev->driver->irq_uninstall = ironlake_irq_uninstall; - dev->driver->enable_vblank = ivybridge_enable_vblank; - dev->driver->disable_vblank = ivybridge_disable_vblank; - } else if (HAS_PCH_SPLIT(dev)) { - dev->driver->irq_handler = ironlake_irq_handler; - dev->driver->irq_preinstall = ironlake_irq_preinstall; - dev->driver->irq_postinstall = ironlake_irq_postinstall; - dev->driver->irq_uninstall = ironlake_irq_uninstall; - dev->driver->enable_vblank = ironlake_enable_vblank; - dev->driver->disable_vblank = ironlake_disable_vblank; - } else { - dev->driver->irq_preinstall = i915_driver_irq_preinstall; - dev->driver->irq_postinstall = i915_driver_irq_postinstall; - dev->driver->irq_uninstall = i915_driver_irq_uninstall; - dev->driver->irq_handler = i915_driver_irq_handler; - dev->driver->enable_vblank = i915_enable_vblank; - dev->driver->disable_vblank = i915_disable_vblank; - } - ret = drm_irq_install(dev); if (ret) goto cleanup_gem; @@ -2017,12 +1993,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) /* enable GEM by default */ dev_priv->has_gem = 1; - dev->driver->get_vblank_counter = i915_get_vblank_counter; - dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { - dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ - dev->driver->get_vblank_counter = gm45_get_vblank_counter; - } + intel_irq_init(dev); /* Try to make sure MCHBAR is enabled before poking at it */ intel_setup_mchbar(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 609358f..013d304 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -765,14 +765,6 @@ static struct drm_driver driver = { .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, - .enable_vblank = i915_enable_vblank, - .disable_vblank = i915_disable_vblank, - .get_vblank_timestamp = i915_get_vblank_timestamp, - .get_scanout_position = i915_get_crtc_scanoutpos, - .irq_preinstall = i915_driver_irq_preinstall, - .irq_postinstall = i915_driver_irq_postinstall, - .irq_uninstall = i915_driver_irq_uninstall, - .irq_handler = i915_driver_irq_handler, .reclaim_buffers = drm_core_reclaim_buffers, .master_create = i915_master_create, .master_destroy = i915_master_destroy, diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 1c8bfb1..f245c58 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1031,33 +1031,12 @@ extern int i915_irq_emit(struct drm_device *dev, void *data, extern int i915_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); -extern void i915_driver_irq_preinstall(struct drm_device * dev); -extern int i915_driver_irq_postinstall(struct drm_device *dev); -extern void i915_driver_irq_uninstall(struct drm_device * dev); - -extern irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS); -extern void ironlake_irq_preinstall(struct drm_device *dev); -extern int ironlake_irq_postinstall(struct drm_device *dev); -extern void ironlake_irq_uninstall(struct drm_device *dev); - -extern irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS); -extern void ivybridge_irq_preinstall(struct drm_device *dev); -extern int ivybridge_irq_postinstall(struct drm_device *dev); -extern void ivybridge_irq_uninstall(struct drm_device *dev); +extern void intel_irq_init(struct drm_device *dev); extern int i915_vblank_pipe_set(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int i915_vblank_pipe_get(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int i915_enable_vblank(struct drm_device *dev, int crtc); -extern void i915_disable_vblank(struct drm_device *dev, int crtc); -extern int ironlake_enable_vblank(struct drm_device *dev, int crtc); -extern void ironlake_disable_vblank(struct drm_device *dev, int crtc); -extern int ivybridge_enable_vblank(struct drm_device *dev, int crtc); -extern void ivybridge_disable_vblank(struct drm_device *dev, int crtc); -extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc); -extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc); extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -1068,13 +1047,6 @@ void i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); void intel_enable_asle (struct drm_device *dev); -int i915_get_vblank_timestamp(struct drm_device *dev, int crtc, - int *max_error, - struct timeval *vblank_time, - unsigned flags); - -int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, - int *vpos, int *hpos); #ifdef CONFIG_DEBUG_FS extern void i915_destroy_error_state(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ae2b499..226d8b2 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -152,7 +152,7 @@ i915_pipe_enabled(struct drm_device *dev, int pipe) /* Called from drm generic code, passed a 'crtc', which * we use as a pipe index */ -u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) +static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long high_frame; @@ -184,7 +184,7 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return (high1 << 8) | low; } -u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) +static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int reg = PIPE_FRMCOUNT_GM45(pipe); @@ -198,7 +198,7 @@ u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) return I915_READ(reg); } -int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, +static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, int *vpos, int *hpos) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -264,7 +264,7 @@ int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, return ret; } -int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, +static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, int *max_error, struct timeval *vblank_time, unsigned flags) @@ -462,7 +462,7 @@ static void pch_irq_handler(struct drm_device *dev) DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n"); } -irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -550,7 +550,7 @@ done: return ret; } -irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1209,7 +1209,7 @@ static void i915_pageflip_stall_check(struct drm_device *dev, int pipe) } } -irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1454,7 +1454,7 @@ int i915_irq_wait(struct drm_device *dev, void *data, /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ -int i915_enable_vblank(struct drm_device *dev, int pipe) +static int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1478,7 +1478,7 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) return 0; } -int ironlake_enable_vblank(struct drm_device *dev, int pipe) +static int ironlake_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1494,7 +1494,7 @@ int ironlake_enable_vblank(struct drm_device *dev, int pipe) return 0; } -int ivybridge_enable_vblank(struct drm_device *dev, int pipe) +static int ivybridge_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1513,7 +1513,7 @@ int ivybridge_enable_vblank(struct drm_device *dev, int pipe) /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ -void i915_disable_vblank(struct drm_device *dev, int pipe) +static void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1529,7 +1529,7 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } -void ironlake_disable_vblank(struct drm_device *dev, int pipe) +static void ironlake_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1540,7 +1540,7 @@ void ironlake_disable_vblank(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } -void ivybridge_disable_vblank(struct drm_device *dev, int pipe) +static void ivybridge_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1728,7 +1728,7 @@ repeat: /* drm_dma.h hooks */ -void ironlake_irq_preinstall(struct drm_device *dev) +static void ironlake_irq_preinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1769,7 +1769,7 @@ void ironlake_irq_preinstall(struct drm_device *dev) POSTING_READ(SDEIER); } -int ironlake_irq_postinstall(struct drm_device *dev) +static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ @@ -1841,7 +1841,7 @@ int ironlake_irq_postinstall(struct drm_device *dev) return 0; } -int ivybridge_irq_postinstall(struct drm_device *dev) +static int ivybridge_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ @@ -1891,7 +1891,7 @@ int ivybridge_irq_postinstall(struct drm_device *dev) return 0; } -void i915_driver_irq_preinstall(struct drm_device * dev) +static void i915_driver_irq_preinstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int pipe; @@ -1918,7 +1918,7 @@ void i915_driver_irq_preinstall(struct drm_device * dev) * Must be called after intel_modeset_init or hotplug interrupts won't be * enabled correctly. */ -int i915_driver_irq_postinstall(struct drm_device *dev) +static int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; @@ -1994,7 +1994,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev) return 0; } -void ironlake_irq_uninstall(struct drm_device *dev) +static void ironlake_irq_uninstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -2014,7 +2014,7 @@ void ironlake_irq_uninstall(struct drm_device *dev) I915_WRITE(GTIIR, I915_READ(GTIIR)); } -void i915_driver_irq_uninstall(struct drm_device * dev) +static void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int pipe; @@ -2040,3 +2040,41 @@ void i915_driver_irq_uninstall(struct drm_device * dev) I915_READ(PIPESTAT(pipe)) & 0x8000ffff); I915_WRITE(IIR, I915_READ(IIR)); } + +void intel_irq_init(struct drm_device *dev) +{ + dev->driver->get_vblank_counter = i915_get_vblank_counter; + dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ + if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { + dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ + dev->driver->get_vblank_counter = gm45_get_vblank_counter; + } + + + dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp; + dev->driver->get_scanout_position = i915_get_crtc_scanoutpos; + + if (IS_IVYBRIDGE(dev)) { + /* Share pre & uninstall handlers with ILK/SNB */ + dev->driver->irq_handler = ivybridge_irq_handler; + dev->driver->irq_preinstall = ironlake_irq_preinstall; + dev->driver->irq_postinstall = ivybridge_irq_postinstall; + dev->driver->irq_uninstall = ironlake_irq_uninstall; + dev->driver->enable_vblank = ivybridge_enable_vblank; + dev->driver->disable_vblank = ivybridge_disable_vblank; + } else if (HAS_PCH_SPLIT(dev)) { + dev->driver->irq_handler = ironlake_irq_handler; + dev->driver->irq_preinstall = ironlake_irq_preinstall; + dev->driver->irq_postinstall = ironlake_irq_postinstall; + dev->driver->irq_uninstall = ironlake_irq_uninstall; + dev->driver->enable_vblank = ironlake_enable_vblank; + dev->driver->disable_vblank = ironlake_disable_vblank; + } else { + dev->driver->irq_preinstall = i915_driver_irq_preinstall; + dev->driver->irq_postinstall = i915_driver_irq_postinstall; + dev->driver->irq_uninstall = i915_driver_irq_uninstall; + dev->driver->irq_handler = i915_driver_irq_handler; + dev->driver->enable_vblank = i915_enable_vblank; + dev->driver->disable_vblank = i915_disable_vblank; + } +} -- cgit v0.10.2 From 4d4d6fbb7c3125f17a4864215191e54b975cfb4f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 29 Jun 2011 10:13:04 +0000 Subject: ARM: mach-shmobile: make a struct in board-ap4evb.c static struct soc_camera_link imx074_link in board-ap4evb.c doesn't have to be global. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index f6b687f..803bc6e 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -913,7 +913,7 @@ static struct i2c_board_info imx074_info = { I2C_BOARD_INFO("imx074", 0x1a), }; -struct soc_camera_link imx074_link = { +static struct soc_camera_link imx074_link = { .bus_id = 0, .board_info = &imx074_info, .i2c_adapter_id = 0, -- cgit v0.10.2 From 7b61ca5d94baf2c31971871fa875750f90fce098 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 30 Jun 2011 15:04:38 +0900 Subject: sh: Fix up unmet dependency warnings with USB EHCI/OHCI selects. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index df89ba5..bbdeb48b 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -348,7 +348,7 @@ config CPU_SUBTYPE_SH7720 select SYS_SUPPORTS_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI - select USB_OHCI_SH + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -358,7 +358,7 @@ config CPU_SUBTYPE_SH7721 select CPU_HAS_DSP select SYS_SUPPORTS_CMT select USB_ARCH_HAS_OHCI - select USB_OHCI_SH + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -442,7 +442,7 @@ config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A select USB_ARCH_HAS_OHCI - select USB_OHCI_SH + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. @@ -470,9 +470,9 @@ config CPU_SUBTYPE_SH7786 select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI - select USB_OHCI_SH + select USB_OHCI_SH if USB_OHCI_HCD select USB_ARCH_HAS_EHCI - select USB_EHCI_SH + select USB_EHCI_SH if USB_EHCI_HCD config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" -- cgit v0.10.2 From 9ab3a15d95809a5d4feecda58b3749c53590e1b2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 30 Jun 2011 15:10:06 +0900 Subject: sh: use printk_ratelimited instead of printk_ratelimit Follows the powerpc change, for much the same rationale. Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 9197110..a3ee919 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -268,9 +269,8 @@ void migrate_irqs(void) unsigned int newcpu = cpumask_any_and(data->affinity, cpu_online_mask); if (newcpu >= nr_cpu_ids) { - if (printk_ratelimit()) - printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", - irq, cpu); + pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n", + irq, cpu); cpumask_setall(data->affinity); newcpu = cpumask_any_and(data->affinity, diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c index b2595b8..620fa7f 100644 --- a/arch/sh/mm/alignment.c +++ b/arch/sh/mm/alignment.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -95,13 +96,13 @@ int set_unalign_ctl(struct task_struct *tsk, unsigned int val) void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn, struct pt_regs *regs) { - if (user_mode(regs) && (se_usermode & UM_WARN) && printk_ratelimit()) - pr_notice("Fixing up unaligned userspace access " + if (user_mode(regs) && (se_usermode & UM_WARN)) + pr_notice_ratelimited("Fixing up unaligned userspace access " "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", tsk->comm, task_pid_nr(tsk), (void *)instruction_pointer(regs), insn); - else if (se_kernmode_warn && printk_ratelimit()) - pr_notice("Fixing up unaligned kernel access " + else if (se_kernmode_warn) + pr_notice_ratelimited("Fixing up unaligned kernel access " "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", tsk->comm, task_pid_nr(tsk), (void *)instruction_pointer(regs), insn); -- cgit v0.10.2 From e336f61fe238ade68eca7850d64fd6c194bdc998 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Tue, 28 Jun 2011 08:43:29 +0200 Subject: MAINTAINERS: update AVR32 and AT32AP maintainers This alters the maintenance of the AVR32 architecture and the AT32AP machine code to be shared between Haavard Skinnemoen and me. The status is also changed to maintained, as we no longer are being paid to look after this architecture. Signed-off-by: Hans-Christian Egtvedt Acked-by: Haavard Skinnemoen diff --git a/MAINTAINERS b/MAINTAINERS index f0358cd..782f11e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1345,16 +1345,18 @@ F: drivers/auxdisplay/ F: include/linux/cfag12864b.h AVR32 ARCHITECTURE -M: Hans-Christian Egtvedt +M: Haavard Skinnemoen +M: Hans-Christian Egtvedt W: http://www.atmel.com/products/AVR32/ W: http://avr32linux.org/ W: http://avrfreaks.net/ -S: Supported +S: Maintained F: arch/avr32/ AVR32/AT32AP MACHINE SUPPORT -M: Hans-Christian Egtvedt -S: Supported +M: Haavard Skinnemoen +M: Hans-Christian Egtvedt +S: Maintained F: arch/avr32/mach-at32ap/ AX.25 NETWORK LAYER -- cgit v0.10.2 From 0cfdd247d1779d5ffc8f685b172a526ecdc6773f Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Wed, 25 May 2011 11:14:35 +0200 Subject: drbd: Use the correct max_bio_size when creating resync requests Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 4d76b06..4d3e6f6 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -536,12 +536,7 @@ static int w_make_resync_request(struct drbd_conf *mdev, return 1; } - /* starting with drbd 8.3.8, we can handle multi-bio EEs, - * if it should be necessary */ - max_bio_size = - mdev->agreed_pro_version < 94 ? queue_max_hw_sectors(mdev->rq_queue) << 9 : - mdev->agreed_pro_version < 95 ? DRBD_MAX_SIZE_H80_PACKET : DRBD_MAX_BIO_SIZE; - + max_bio_size = queue_max_hw_sectors(mdev->rq_queue) << 9; number = drbd_rs_number_requests(mdev); if (number == 0) goto requeue; -- cgit v0.10.2 From 829c60878626be290a4c248e8f1b86a0d5cbd38b Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Fri, 3 Jun 2011 21:18:13 +0200 Subject: drbd: add missing spinlock to bitmap receive During bitmap exchange, when using the RLE bitmap compression scheme, we have a code path that can set the whole bitmap at once. To avoid holding spin_lock_irq() for too long, we used to lock out other bitmap modifications during bitmap exchange by other means, and then, knowing we have exclusive access to the bitmap, modify it without the spinlock, and with IRQs enabled. Since we now allow local IO to continue, potentially setting additional bits during the bitmap receive phase, this is no longer true, and we get uncoordinated updates of bitmap members, causing bm_set to no longer accurately reflect the total number of set bits. To actually see this, you'd need to have a large bitmap, use RLE bitmap compression, and have busy IO during sync handshake and bitmap exchange. Fix this by taking the spin_lock_irq() in this code path as well, but calling cond_resched_lock() after each page worth of bits processed. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index f440a02..1e89a74 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -112,9 +112,6 @@ struct drbd_bitmap { struct task_struct *bm_task; }; -static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, - unsigned long e, int val, const enum km_type km); - #define bm_print_lock_info(m) __bm_print_lock_info(m, __func__) static void __bm_print_lock_info(struct drbd_conf *mdev, const char *func) { @@ -1256,7 +1253,7 @@ unsigned long _drbd_bm_find_next_zero(struct drbd_conf *mdev, unsigned long bm_f * expected to be called for only a few bits (e - s about BITS_PER_LONG). * Must hold bitmap lock already. */ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, - unsigned long e, int val, const enum km_type km) + unsigned long e, int val) { struct drbd_bitmap *b = mdev->bitmap; unsigned long *p_addr = NULL; @@ -1274,14 +1271,14 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, unsigned int page_nr = bm_bit_to_page_idx(b, bitnr); if (page_nr != last_page_nr) { if (p_addr) - __bm_unmap(p_addr, km); + __bm_unmap(p_addr, KM_IRQ1); if (c < 0) bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]); else if (c > 0) bm_set_page_need_writeout(b->bm_pages[last_page_nr]); changed_total += c; c = 0; - p_addr = __bm_map_pidx(b, page_nr, km); + p_addr = __bm_map_pidx(b, page_nr, KM_IRQ1); last_page_nr = page_nr; } if (val) @@ -1290,7 +1287,7 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, c -= (0 != __test_and_clear_bit_le(bitnr & BITS_PER_PAGE_MASK, p_addr)); } if (p_addr) - __bm_unmap(p_addr, km); + __bm_unmap(p_addr, KM_IRQ1); if (c < 0) bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]); else if (c > 0) @@ -1318,7 +1315,7 @@ static int bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, if ((val ? BM_DONT_SET : BM_DONT_CLEAR) & b->bm_flags) bm_print_lock_info(mdev); - c = __bm_change_bits_to(mdev, s, e, val, KM_IRQ1); + c = __bm_change_bits_to(mdev, s, e, val); spin_unlock_irqrestore(&b->bm_lock, flags); return c; @@ -1343,16 +1340,17 @@ static inline void bm_set_full_words_within_one_page(struct drbd_bitmap *b, { int i; int bits; - unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_USER0); + unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_IRQ1); for (i = first_word; i < last_word; i++) { bits = hweight_long(paddr[i]); paddr[i] = ~0UL; b->bm_set += BITS_PER_LONG - bits; } - kunmap_atomic(paddr, KM_USER0); + kunmap_atomic(paddr, KM_IRQ1); } -/* Same thing as drbd_bm_set_bits, but without taking the spin_lock_irqsave. +/* Same thing as drbd_bm_set_bits, + * but more efficient for a large bit range. * You must first drbd_bm_lock(). * Can be called to set the whole bitmap in one go. * Sets bits from s to e _inclusive_. */ @@ -1366,6 +1364,7 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi * Do not use memset, because we must account for changes, * so we need to loop over the words with hweight() anyways. */ + struct drbd_bitmap *b = mdev->bitmap; unsigned long sl = ALIGN(s,BITS_PER_LONG); unsigned long el = (e+1) & ~((unsigned long)BITS_PER_LONG-1); int first_page; @@ -1376,15 +1375,19 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi if (e - s <= 3*BITS_PER_LONG) { /* don't bother; el and sl may even be wrong. */ - __bm_change_bits_to(mdev, s, e, 1, KM_USER0); + spin_lock_irq(&b->bm_lock); + __bm_change_bits_to(mdev, s, e, 1); + spin_unlock_irq(&b->bm_lock); return; } /* difference is large enough that we can trust sl and el */ + spin_lock_irq(&b->bm_lock); + /* bits filling the current long */ if (sl) - __bm_change_bits_to(mdev, s, sl-1, 1, KM_USER0); + __bm_change_bits_to(mdev, s, sl-1, 1); first_page = sl >> (3 + PAGE_SHIFT); last_page = el >> (3 + PAGE_SHIFT); @@ -1397,7 +1400,7 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi /* first and full pages, unless first page == last page */ for (page_nr = first_page; page_nr < last_page; page_nr++) { bm_set_full_words_within_one_page(mdev->bitmap, page_nr, first_word, last_word); - cond_resched(); + cond_resched_lock(&b->bm_lock); first_word = 0; } @@ -1411,7 +1414,8 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi * it would trigger an assert in __bm_change_bits_to() */ if (el <= e) - __bm_change_bits_to(mdev, el, e, 1, KM_USER0); + __bm_change_bits_to(mdev, el, e, 1); + spin_unlock_irq(&b->bm_lock); } /* returns bit state -- cgit v0.10.2 From 8ccee20e3ef4e12dbf02a18f17d386569b1f73ee Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Mon, 6 Jun 2011 11:31:42 +0200 Subject: drbd: don't cond_resched_lock with IRQs disabled The last commit, drbd: add missing spinlock to bitmap receive, introduced a cond_resched_lock(), where the lock in question is taken with irqs disabled. As we must not schedule with IRQs disabled, and cond_resched_lock_irq() does not exist, yet, we re-aquire the spin_lock_irq() for each bitmap page processed in turn. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index 1e89a74..61f4fae 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -1400,8 +1400,10 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi /* first and full pages, unless first page == last page */ for (page_nr = first_page; page_nr < last_page; page_nr++) { bm_set_full_words_within_one_page(mdev->bitmap, page_nr, first_word, last_word); - cond_resched_lock(&b->bm_lock); + spin_unlock_irq(&b->bm_lock); + cond_resched(); first_word = 0; + spin_lock_irq(&b->bm_lock); } /* last page (respectively only page, for first page == last page) */ -- cgit v0.10.2 From 5a8b424276f7ba50c51e7caf485b2be23739e5b8 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Tue, 14 Jun 2011 14:18:23 +0200 Subject: drbd: account bitmap IO during resync as resync-(related-)-io If we have a good resync rate, we will frequently update the on-disk bitmap, which, if not accounted for as resync io, may let an otherwise idle device appear to be "busy", and cause us to throttle resync. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index 61f4fae..7b97629 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -991,6 +991,9 @@ static void bm_page_io_async(struct bm_aio_ctx *ctx, int page_nr, int rw) __must bio_endio(bio, -EIO); } else { submit_bio(rw, bio); + /* this should not count as user activity and cause the + * resync to throttle -- see drbd_rs_should_slow_down(). */ + atomic_add(len >> 9, &mdev->rs_sect_ev); } } -- cgit v0.10.2 From cb6518cbef5e3e36b7ae90fcab610a52ea7e9fc0 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Mon, 20 Jun 2011 14:44:45 +0200 Subject: drbd: when receive times out on meta socket, also check last receive time on data socket If we have an asymetrically congested network, we may send P_PING, but due to congestion, the corresponding P_PING_ACK would time out, and we would drop a (congested, but otherwise) healthy connection ("PingAck did not arrive in time.") Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 25d32c5..43beaca 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -4602,6 +4602,11 @@ int drbd_asender(struct drbd_thread *thi) dev_err(DEV, "meta connection shut down by peer.\n"); goto reconnect; } else if (rv == -EAGAIN) { + /* If the data socket received something meanwhile, + * that is good enough: peer is still alive. */ + if (time_after(mdev->last_received, + jiffies - mdev->meta.socket->sk->sk_rcvtimeo)) + continue; if (ping_timeout_active) { dev_err(DEV, "PingAck did not arrive in time.\n"); goto reconnect; @@ -4637,6 +4642,7 @@ int drbd_asender(struct drbd_thread *thi) goto reconnect; } if (received == expect) { + mdev->last_received = jiffies; D_ASSERT(cmd != NULL); if (!cmd->process(mdev, h)) goto reconnect; -- cgit v0.10.2 From 15b493d11fcce3c5547e3d7fb6d90e11ffe12777 Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Tue, 28 Jun 2011 09:48:48 +0200 Subject: drbd: fix limit define, we support 1 PiByte now Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h index 246f576..447c367 100644 --- a/include/linux/drbd_limits.h +++ b/include/linux/drbd_limits.h @@ -117,10 +117,10 @@ /* drbdsetup XY resize -d Z * you are free to reduce the device size to nothing, if you want to. * the upper limit with 64bit kernel, enough ram and flexible meta data - * is 16 TB, currently. */ + * is 1 PiB, currently. */ /* DRBD_MAX_SECTORS */ #define DRBD_DISK_SIZE_SECT_MIN 0 -#define DRBD_DISK_SIZE_SECT_MAX (16 * (2LLU << 30)) +#define DRBD_DISK_SIZE_SECT_MAX (1 * (2LLU << 40)) #define DRBD_DISK_SIZE_SECT_DEF 0 /* = disabled = no user size... */ #define DRBD_ON_IO_ERROR_DEF EP_PASS_ON -- cgit v0.10.2 From 86e1e98e5c6b4edab97e2b058466ef553cfd878e Mon Sep 17 00:00:00 2001 From: Lars Ellenberg Date: Tue, 28 Jun 2011 13:22:48 +0200 Subject: drbd: we should write meta data updates with FLUSH FUA We used to write these with BIO_RW_BARRIER aka REQ_HARDBARRIER (unless disabled in the configuration). The correct semantic now would be to write with FLUSH/FUA. For example, with activity log transactions, FUA alone is not enough, we need the corresponding bitmap update (and all related application updates) on stable storage as well. Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c index 09ef9a8..cf0e63d 100644 --- a/drivers/block/drbd/drbd_actlog.c +++ b/drivers/block/drbd/drbd_actlog.c @@ -79,7 +79,7 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev, md_io.error = 0; if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags)) - rw |= REQ_FUA; + rw |= REQ_FUA | REQ_FLUSH; rw |= REQ_SYNC; bio = bio_alloc(GFP_NOIO, 1); -- cgit v0.10.2 From cbe263497def23befb6f475977661bae5d1f82e4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 30 Jun 2011 08:45:49 +0100 Subject: ARM: pm: omap3: move saving of the auxiliary control registers to C Move the saving of the auxiliary control registers into C; there's no need for this to be in assembly code. This results in less assembly code to deal with in OMAP. Kevin tested full-chip retention and off on 3430/n900, 3530/Overo and 3630/Zoom3. Tested-by: Kevin Hilman Signed-off-by: Russell King diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index a4ec213..04ee566 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -97,7 +97,7 @@ extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, extern unsigned int omap24xx_cpu_suspend_sz; /* 3xxx */ -extern void omap34xx_cpu_suspend(u32 *addr, int save_state); +extern void omap34xx_cpu_suspend(int save_state); /* omap3_do_wfi function pointer and size, for copy to SRAM */ extern void omap3_do_wfi(void); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e1c79ba..7238a63 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -306,9 +306,24 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } +static void omap34xx_save_context(u32 *save) +{ + u32 val; + + /* Read Auxiliary Control Register */ + asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val)); + *save++ = 1; + *save++ = val; + + /* Read L2 AUX ctrl register */ + asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val)); + *save++ = 1; + *save++ = val; +} + static void omap34xx_do_sram_idle(unsigned long save_state) { - omap34xx_cpu_suspend(omap3_arm_context, save_state); + omap34xx_cpu_suspend(save_state); } void omap_sram_idle(void) @@ -408,6 +423,8 @@ void omap_sram_idle(void) * get saved. The rest is placed on the stack, and restored * from there before resuming. */ + if (save_state) + omap34xx_save_context(omap3_arm_context); if (save_state == 1 || save_state == 3) cpu_suspend(save_state, omap34xx_do_sram_idle); else diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 17dbc5a..f2ea1bd 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -152,8 +152,7 @@ ENTRY(omap34xx_cpu_suspend) stmfd sp!, {r4 - r11, lr} @ save registers on stack /* - * r0 contains CPU context save/restore pointer in sdram - * r1 contains information about saving context: + * r0 contains information about saving context: * 0 - No context lost * 1 - Only L1 and logic lost * 2 - Only L2 lost (Even L1 is retained we clean it along with L2) @@ -166,19 +165,12 @@ ENTRY(omap34xx_cpu_suspend) */ ldr r4, omap3_do_wfi_sram_addr ldr r5, [r4] - cmp r1, #0x0 @ If no context save required, + cmp r0, #0x0 @ If no context save required, bxeq r5 @ jump to the WFI code in SRAM /* Otherwise fall through to the save context code */ save_context_wfi: - mov r8, r0 @ Store SDRAM address in r8 - mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register - mov r4, #0x1 @ Number of parameters for restore call - stmia r8!, {r4-r5} @ Push parameters for restore call - mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register - stmia r8!, {r4-r5} @ Push parameters for restore call - /* * jump out to kernel flush routine * - reuse that code is better -- cgit v0.10.2 From b059bdc39321696fe8f344acb7117d57fbd7b475 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 15:44:20 +0100 Subject: ARM: entry: rejig register allocation in exception entry handlers This allows us to avoid moving registers twice to work around the clobbered registers when we add calls to trace_hardirqs_{on,off}. Ensure that all SVC handlers return with SPSR in r5 for consistency. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index fd42e66..582bb23 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -45,7 +45,7 @@ .endm .macro pabt_helper - mov r0, r2 @ pass address of aborted instruction. + mov r0, r4 @ pass address of aborted instruction. #ifdef MULTI_PABORT ldr ip, .LCprocfns mov lr, pc @@ -56,6 +56,8 @@ .endm .macro dabt_helper + mov r2, r4 + mov r3, r5 @ @ Call the processor-specific abort handler: @@ -157,26 +159,26 @@ ENDPROC(__und_invalid) SPFIX( subeq sp, sp, #4 ) stmia sp, {r1 - r12} - ldmia r0, {r1 - r3} - add r5, sp, #S_SP - 4 @ here for interlock avoidance - mov r4, #-1 @ "" "" "" "" - add r0, sp, #(S_FRAME_SIZE + \stack_hole - 4) - SPFIX( addeq r0, r0, #4 ) - str r1, [sp, #-4]! @ save the "real" r0 copied + ldmia r0, {r3 - r5} + add r7, sp, #S_SP - 4 @ here for interlock avoidance + mov r6, #-1 @ "" "" "" "" + add r2, sp, #(S_FRAME_SIZE + \stack_hole - 4) + SPFIX( addeq r2, r2, #4 ) + str r3, [sp, #-4]! @ save the "real" r0 copied @ from the exception stack - mov r1, lr + mov r3, lr @ @ We are now ready to fill in the remaining blanks on the stack: @ - @ r0 - sp_svc - @ r1 - lr_svc - @ r2 - lr_, already fixed up for correct return/restart - @ r3 - spsr_ - @ r4 - orig_r0 (see pt_regs definition in ptrace.h) + @ r2 - sp_svc + @ r3 - lr_svc + @ r4 - lr_, already fixed up for correct return/restart + @ r5 - spsr_ + @ r6 - orig_r0 (see pt_regs definition in ptrace.h) @ - stmia r5, {r0 - r4} + stmia r7, {r2 - r6} .endm .align 5 @@ -187,7 +189,7 @@ __dabt_svc: @ get ready to re-enable interrupts if appropriate @ mrs r9, cpsr - tst r3, #PSR_I_BIT + tst r5, #PSR_I_BIT biceq r9, r9, #PSR_I_BIT dabt_helper @@ -208,8 +210,8 @@ __dabt_svc: @ @ restore SPSR and restart the instruction @ - ldr r2, [sp, #S_PSR] - svc_exit r2 @ return from exception + ldr r5, [sp, #S_PSR] + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__dabt_svc) @@ -232,13 +234,13 @@ __irq_svc: tst r0, #_TIF_NEED_RESCHED blne svc_preempt #endif - ldr r4, [sp, #S_PSR] @ irqs are already disabled + ldr r5, [sp, #S_PSR] #ifdef CONFIG_TRACE_IRQFLAGS @ The parent context IRQs must have been enabled to get here in @ the first place, so there's no point checking the PSR I bit. bl trace_hardirqs_on #endif - svc_exit r4 @ return from exception + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__irq_svc) @@ -273,15 +275,16 @@ __und_svc: @ r0 - instruction @ #ifndef CONFIG_THUMB2_KERNEL - ldr r0, [r2, #-4] + ldr r0, [r4, #-4] #else - ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2 + ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 and r9, r0, #0xf800 cmp r9, #0xe800 @ 32-bit instruction if xx >= 0 - ldrhhs r9, [r2] @ bottom 16 bits + ldrhhs r9, [r4] @ bottom 16 bits orrhs r0, r9, r0, lsl #16 #endif adr r9, BSYM(1f) + mov r2, r4 bl call_fpe mov r0, sp @ struct pt_regs *regs @@ -295,8 +298,8 @@ __und_svc: @ @ restore SPSR and restart the instruction @ - ldr r2, [sp, #S_PSR] @ Get SVC cpsr - svc_exit r2 @ return from exception + ldr r5, [sp, #S_PSR] @ Get SVC cpsr + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__und_svc) @@ -308,7 +311,7 @@ __pabt_svc: @ re-enable interrupts if appropriate @ mrs r9, cpsr - tst r3, #PSR_I_BIT + tst r5, #PSR_I_BIT biceq r9, r9, #PSR_I_BIT pabt_helper @@ -325,8 +328,8 @@ __pabt_svc: @ @ restore SPSR and restart the instruction @ - ldr r2, [sp, #S_PSR] - svc_exit r2 @ return from exception + ldr r5, [sp, #S_PSR] + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__pabt_svc) @@ -357,23 +360,23 @@ ENDPROC(__pabt_svc) ARM( stmib sp, {r1 - r12} ) THUMB( stmia sp, {r0 - r12} ) - ldmia r0, {r1 - r3} + ldmia r0, {r3 - r5} add r0, sp, #S_PC @ here for interlock avoidance - mov r4, #-1 @ "" "" "" "" + mov r6, #-1 @ "" "" "" "" - str r1, [sp] @ save the "real" r0 copied + str r3, [sp] @ save the "real" r0 copied @ from the exception stack @ @ We are now ready to fill in the remaining blanks on the stack: @ - @ r2 - lr_, already fixed up for correct return/restart - @ r3 - spsr_ - @ r4 - orig_r0 (see pt_regs definition in ptrace.h) + @ r4 - lr_, already fixed up for correct return/restart + @ r5 - spsr_ + @ r6 - orig_r0 (see pt_regs definition in ptrace.h) @ @ Also, separately save sp_usr and lr_usr @ - stmia r0, {r2 - r4} + stmia r0, {r4 - r6} ARM( stmdb r0, {sp, lr}^ ) THUMB( store_user_sp_lr r0, r1, S_SP - S_PC ) @@ -397,7 +400,7 @@ ENDPROC(__pabt_svc) @ if it was interrupted in a critical region. Here we @ perform a quick test inline since it should be false @ 99.9999% of the time. The rest is done out of line. - cmp r2, #TASK_SIZE + cmp r4, #TASK_SIZE blhs kuser_cmpxchg_fixup #endif #endif @@ -441,6 +444,8 @@ ENDPROC(__irq_usr) .align 5 __und_usr: usr_entry + mov r2, r4 + mov r3, r5 @ @ fall through to the emulation code, which returns using r9 if @@ -894,13 +899,13 @@ __kuser_cmpxchg: @ 0xffff0fc0 .text kuser_cmpxchg_fixup: @ Called from kuser_cmpxchg_check macro. - @ r2 = address of interrupted insn (must be preserved). + @ r4 = address of interrupted insn (must be preserved). @ sp = saved regs. r7 and r8 are clobbered. @ 1b = first critical insn, 2b = last critical insn. - @ If r2 >= 1b and r2 <= 2b then saved pc_usr is set to 1b. + @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b. mov r7, #0xffff0fff sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg))) - subs r8, r2, r7 + subs r8, r4, r7 rsbcss r8, r8, #(2b - 1b) strcs r7, [sp, #S_PC] mov pc, lr -- cgit v0.10.2 From 8b4186160b7894ca4583f702a562856d5d9e9118 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 19:25:02 +0100 Subject: ARM: entry: prefetch abort helper: pass aborted pc in r4 rather than r0 This avoids unnecessary instructions for CPUs which implement the IFAR (instruction fault address register). Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 582bb23..d644d02 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -45,7 +45,7 @@ .endm .macro pabt_helper - mov r0, r4 @ pass address of aborted instruction. + @ PABORT handler takes fault address in r4 #ifdef MULTI_PABORT ldr ip, .LCprocfns mov lr, pc diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S index 87970eb..8a5d8aa 100644 --- a/arch/arm/mm/pabort-legacy.S +++ b/arch/arm/mm/pabort-legacy.S @@ -4,7 +4,7 @@ /* * Function: legacy_pabort * - * Params : r0 = address of aborted instruction + * Params : r4 = address of aborted instruction * * Returns : r0 = address of abort * : r1 = Simulated IFSR with section translation fault status @@ -14,6 +14,7 @@ .align 5 ENTRY(legacy_pabort) + mov r0, r4 mov r1, #5 mov pc, lr ENDPROC(legacy_pabort) diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S index 06e3d1e..eaac1cb 100644 --- a/arch/arm/mm/pabort-v6.S +++ b/arch/arm/mm/pabort-v6.S @@ -4,7 +4,7 @@ /* * Function: v6_pabort * - * Params : r0 = address of aborted instruction + * Params : r4 = address of aborted instruction * * Returns : r0 = address of abort * : r1 = IFSR @@ -14,6 +14,7 @@ .align 5 ENTRY(v6_pabort) + mov r0, r4 mrc p15, 0, r1, c5, c0, 1 @ get IFSR mov pc, lr ENDPROC(v6_pabort) diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S index a8b3b30..b515e0b 100644 --- a/arch/arm/mm/pabort-v7.S +++ b/arch/arm/mm/pabort-v7.S @@ -4,7 +4,7 @@ /* * Function: v6_pabort * - * Params : r0 = address of aborted instruction + * Params : r4 = address of aborted instruction * * Returns : r0 = address of abort * : r1 = IFSR -- cgit v0.10.2 From 71276410e17653cfacfa238a363475cde9e18fb3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 30 Jun 2011 12:31:23 +0200 Subject: ALSA: cs5535 - Fix invalid big-endian conversions Fix the wrongly converted short values: sound/pci/cs5535audio/cs5535audio_pcm.c:152: warning: large integer implicitly truncated to unsigned type sound/pci/cs5535audio/cs5535audio_pcm.c:160: warning: large integer implicitly truncated to unsigned type Signed-off-by: Takashi Iwai diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c index f16bc8a..e083122 100644 --- a/sound/pci/cs5535audio/cs5535audio_pcm.c +++ b/sound/pci/cs5535audio/cs5535audio_pcm.c @@ -149,7 +149,7 @@ static int cs5535audio_build_dma_packets(struct cs5535audio *cs5535au, &((struct cs5535audio_dma_desc *) dma->desc_buf.area)[i]; desc->addr = cpu_to_le32(addr); desc->size = cpu_to_le32(period_bytes); - desc->ctlreserved = cpu_to_le32(PRD_EOP); + desc->ctlreserved = cpu_to_le16(PRD_EOP); desc_addr += sizeof(struct cs5535audio_dma_desc); addr += period_bytes; } @@ -157,7 +157,7 @@ static int cs5535audio_build_dma_packets(struct cs5535audio *cs5535au, lastdesc = &((struct cs5535audio_dma_desc *) dma->desc_buf.area)[periods]; lastdesc->addr = cpu_to_le32((u32) dma->desc_buf.addr); lastdesc->size = 0; - lastdesc->ctlreserved = cpu_to_le32(PRD_JMP); + lastdesc->ctlreserved = cpu_to_le16(PRD_JMP); jmpprd_addr = cpu_to_le32(lastdesc->addr + (sizeof(struct cs5535audio_dma_desc)*periods)); -- cgit v0.10.2 From 286bed0f0c447b6660e72093d7e778784fdd9ee6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 30 Jun 2011 12:45:36 +0200 Subject: ALSA: hdspm - Fix compile warnings with PPC The char can be unsigned on some architectures. Since the code checks the negative values, they should be declared as signed char explicitly. sound/pci/rme9652/hdspm.c:5449: warning: comparison is always false due to limited range of data type sound/pci/rme9652/hdspm.c:5462: warning: comparison is always false due to limited range of data type Signed-off-by: Takashi Iwai diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 3f08afc..c8e402f 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -896,11 +896,11 @@ struct hdspm { unsigned char max_channels_in; unsigned char max_channels_out; - char *channel_map_in; - char *channel_map_out; + signed char *channel_map_in; + signed char *channel_map_out; - char *channel_map_in_ss, *channel_map_in_ds, *channel_map_in_qs; - char *channel_map_out_ss, *channel_map_out_ds, *channel_map_out_qs; + signed char *channel_map_in_ss, *channel_map_in_ds, *channel_map_in_qs; + signed char *channel_map_out_ss, *channel_map_out_ds, *channel_map_out_qs; char **port_names_in; char **port_names_out; -- cgit v0.10.2 From 50176ddefa4a942419cb693dd2d8345bfdcde67c Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Tue, 31 May 2011 16:35:50 -0500 Subject: hfsplus: add missing call to bio_put() hfsplus leaks bio objects by failing to call bio_put() on the bios it allocates. Add the missing call to fix the leak. Signed-off-by: Seth Forshee Cc: # .38.x, .39.x Signed-off-by: Christoph Hellwig diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index 3031d81..4ac88ff 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -36,6 +36,7 @@ int hfsplus_submit_bio(struct block_device *bdev, sector_t sector, { DECLARE_COMPLETION_ONSTACK(wait); struct bio *bio; + int ret = 0; bio = bio_alloc(GFP_NOIO, 1); bio->bi_sector = sector; @@ -54,8 +55,10 @@ int hfsplus_submit_bio(struct block_device *bdev, sector_t sector, wait_for_completion(&wait); if (!bio_flagged(bio, BIO_UPTODATE)) - return -EIO; - return 0; + ret = -EIO; + + bio_put(bio); + return ret; } static int hfsplus_read_mdb(void *bufptr, struct hfsplus_wd *wd) -- cgit v0.10.2 From 032016a56a1e9c83646435b32e4416d499e1f1ce Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 24 Jun 2011 01:15:02 +0400 Subject: hfsplus: Fix double iput of the same inode in hfsplus_fill_super() There is a misprint in resource deallocation code on error path in hfsplus_fill_super(): the sbi->alloc_file inode is iput twice, while the root inode in not iput at all. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Christoph Hellwig diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c index b49b555..84a47b7 100644 --- a/fs/hfsplus/super.c +++ b/fs/hfsplus/super.c @@ -500,7 +500,7 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent) out_put_hidden_dir: iput(sbi->hidden_dir); out_put_root: - iput(sbi->alloc_file); + iput(root); out_put_alloc_file: iput(sbi->alloc_file); out_close_cat_tree: -- cgit v0.10.2 From 32dd11942aeb47f91209a446d6b10063c5b69389 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 30 Jun 2011 09:12:40 -0400 Subject: xen/mmu: Fix for linker errors when CONFIG_SMP is not defined. Simple enough - we use an extern defined symbol which is not defined when CONFIG_SMP is not defined. This fixes the linker dying. CC: stable@kernel.org Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 673e968..0ccccb6 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1232,7 +1232,11 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, { struct { struct mmuext_op op; +#ifdef CONFIG_SMP DECLARE_BITMAP(mask, num_processors); +#else + DECLARE_BITMAP(mask, NR_CPUS); +#endif } *args; struct multicall_space mcs; -- cgit v0.10.2 From 4f3c7a18d9e8a287d31f828a259d713fe4859471 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 30 Jun 2011 15:08:04 +0200 Subject: ALSA: sb16 - Fix build errors on MIPS and others with 13bit ioctl size One of ioctl definition in sound/sb16_csp.h contains the data size over 8kB, and this causes build errors on architectures like MIPS, which define _IOC_SIZEBITS=13. For avoiding this build errors but keeping the compatibility, manually expand with _IOC() instead of using _IOW() for the problematic ioctl. Signed-off-by: Takashi Iwai diff --git a/include/sound/sb16_csp.h b/include/sound/sb16_csp.h index 736eac7..af1b49e 100644 --- a/include/sound/sb16_csp.h +++ b/include/sound/sb16_csp.h @@ -99,7 +99,14 @@ struct snd_sb_csp_info { /* get CSP information */ #define SNDRV_SB_CSP_IOCTL_INFO _IOR('H', 0x10, struct snd_sb_csp_info) /* load microcode to CSP */ -#define SNDRV_SB_CSP_IOCTL_LOAD_CODE _IOW('H', 0x11, struct snd_sb_csp_microcode) +/* NOTE: struct snd_sb_csp_microcode overflows the max size (13 bits) + * defined for some architectures like MIPS, and it leads to build errors. + * (x86 and co have 14-bit size, thus it's valid, though.) + * As a workaround for skipping the size-limit check, here we don't use the + * normal _IOW() macro but _IOC() with the manual argument. + */ +#define SNDRV_SB_CSP_IOCTL_LOAD_CODE \ + _IOC(_IOC_WRITE, 'H', 0x11, sizeof(struct snd_sb_csp_microcode)) /* unload microcode from CSP */ #define SNDRV_SB_CSP_IOCTL_UNLOAD_CODE _IO('H', 0x12) /* start CSP */ -- cgit v0.10.2 From 155a16f21923bc2f04161ac92acca986371ef27b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 30 Jun 2011 09:18:27 -0400 Subject: xen/pci: Use the INT_SRC_OVR IRQ (instead of GSI) to preset the ACPI SCI IRQ. In the past we would use the GSI value to preset the ACPI SCI IRQ which worked great as GSI == IRQ: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) While that is most often seen, there are some oddities: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) which means that GSI 20 (or pin 20) is to be overriden for IRQ 9. Our code that presets the interrupt for ACPI SCI however would use the GSI 20 instead of IRQ 9 ending up with: xen: sci override: global_irq=20 trigger=0 polarity=1 xen: registering gsi 20 triggering 0 polarity 1 xen: --> pirq=20 -> irq=20 xen: acpi sci 20 .. snip.. calling acpi_init+0x0/0xbc @ 1 ACPI: SCI (IRQ9) allocation failed ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20110413/evevent-119) ACPI: Unable to start the ACPI Interpreter as the ACPI interpreter made a call to 'acpi_gsi_to_irq' which got nine. It used that value to request an IRQ (request_irq) and since that was not present it failed. The fix is to recognize that for interrupts that are overriden (in our case we only care about the ACPI SCI) we should use the IRQ number to present the IRQ instead of the using GSI. End result is that we get: xen: sci override: global_irq=20 trigger=0 polarity=1 xen: registering gsi 20 triggering 0 polarity 1 xen: --> pirq=20 -> irq=9 (gsi=9) xen: acpi sci 9 which fixes the ACPI interpreter failing on startup. CC: stable@kernel.org Reported-by: Liwei Tested-by: Liwei [http://lists.xensource.com/archives/html/xen-devel/2011-06/msg01727.html] Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 8214724..fe00830 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -333,6 +333,7 @@ static int xen_register_pirq(u32 gsi, int triggering) struct physdev_map_pirq map_irq; int shareable = 0; char *name; + bool gsi_override = false; if (!xen_pv_domain()) return -1; @@ -349,11 +350,32 @@ static int xen_register_pirq(u32 gsi, int triggering) if (pirq < 0) goto out; - irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name); + /* Before we bind the GSI to a Linux IRQ, check whether + * we need to override it with bus_irq (IRQ) value. Usually for + * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so: + * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) + * but there are oddballs where the IRQ != GSI: + * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) + * which ends up being: gsi_to_irq[9] == 20 + * (which is what acpi_gsi_to_irq ends up calling when starting the + * the ACPI interpreter and keels over since IRQ 9 has not been + * setup as we had setup IRQ 20 for it). + */ + if (gsi == acpi_sci_override_gsi) { + /* Check whether the GSI != IRQ */ + acpi_gsi_to_irq(gsi, &irq); + if (irq != gsi) + /* Bugger, we MUST have that IRQ. */ + gsi_override = true; + } + if (gsi_override) + irq = xen_bind_pirq_gsi_to_irq(irq, pirq, shareable, name); + else + irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name); if (irq < 0) goto out; - printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, irq); + printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", pirq, irq, gsi); map_irq.domid = DOMID_SELF; map_irq.type = MAP_PIRQ_TYPE_GSI; -- cgit v0.10.2 From 7bb59df83b190817f56c4e2fec3078d99d906ad4 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Thu, 30 Jun 2011 13:53:53 -0400 Subject: Bluetooth: Fix hidp disconnect deadlocks and lost wakeup Partial revert of commit aabf6f89. When the hidp session thread was converted from kernel_thread to kthread, the atomic/wakeups were replaced with kthread_stop. kthread_stop has blocking semantics which are inappropriate for the hidp session kthread. In addition, the kthread signals itself to terminate in hidp_process_hid_control() - it cannot do this with kthread_stop(). Lastly, a wakeup can be lost if the wakeup happens between checking for the loop exit condition and setting the current state to TASK_INTERRUPTIBLE. (Without appropriate synchronization mechanisms, the task state should not be changed between the condition test and the yield - via schedule() - as this creates a race between the wakeup and resetting the state back to interruptible.) Signed-off-by: Peter Hurley Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index c405a95..43b4c2d 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -464,7 +464,8 @@ static void hidp_idle_timeout(unsigned long arg) { struct hidp_session *session = (struct hidp_session *) arg; - kthread_stop(session->task); + atomic_inc(&session->terminate); + wake_up_process(session->task); } static void hidp_set_timer(struct hidp_session *session) @@ -535,7 +536,8 @@ static void hidp_process_hid_control(struct hidp_session *session, skb_queue_purge(&session->ctrl_transmit); skb_queue_purge(&session->intr_transmit); - kthread_stop(session->task); + atomic_inc(&session->terminate); + wake_up_process(current); } } @@ -706,9 +708,8 @@ static int hidp_session(void *arg) add_wait_queue(sk_sleep(intr_sk), &intr_wait); session->waiting_for_startup = 0; wake_up_interruptible(&session->startup_queue); - while (!kthread_should_stop()) { - set_current_state(TASK_INTERRUPTIBLE); - + set_current_state(TASK_INTERRUPTIBLE); + while (!atomic_read(&session->terminate)) { if (ctrl_sk->sk_state != BT_CONNECTED || intr_sk->sk_state != BT_CONNECTED) break; @@ -726,6 +727,7 @@ static int hidp_session(void *arg) hidp_process_transmit(session); schedule(); + set_current_state(TASK_INTERRUPTIBLE); } set_current_state(TASK_RUNNING); remove_wait_queue(sk_sleep(intr_sk), &intr_wait); @@ -1060,7 +1062,8 @@ int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock, err_add_device: hid_destroy_device(session->hid); session->hid = NULL; - kthread_stop(session->task); + atomic_inc(&session->terminate); + wake_up_process(session->task); unlink: hidp_del_timer(session); @@ -1111,7 +1114,8 @@ int hidp_del_connection(struct hidp_conndel_req *req) skb_queue_purge(&session->ctrl_transmit); skb_queue_purge(&session->intr_transmit); - kthread_stop(session->task); + atomic_inc(&session->terminate); + wake_up_process(session->task); } } else err = -ENOENT; diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h index 19e9500..af1bcc8 100644 --- a/net/bluetooth/hidp/hidp.h +++ b/net/bluetooth/hidp/hidp.h @@ -142,6 +142,7 @@ struct hidp_session { uint ctrl_mtu; uint intr_mtu; + atomic_t terminate; struct task_struct *task; unsigned char keys[8]; -- cgit v0.10.2 From 9fa7e4f76f3658ba1f44fbdb95c77e7df3f53f95 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Thu, 30 Jun 2011 16:11:30 -0300 Subject: Bluetooth: Fix regression with incoming L2CAP connections PTS test A2DP/SRC/SRC_SET/TC_SRC_SET_BV_02_I revealed that ( probably after the df3c3931e commit ) the l2cap connection could not be established in case when the "Auth Complete" HCI event does not arive before the initiator send "Configuration request", in which case l2cap replies with "Command rejected" since the channel is still in BT_CONNECT2 state. Based on patch from: Ilia Kolomisnky Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 7d8a66b..ebff14c 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -2323,7 +2323,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr sk = chan->sk; - if (sk->sk_state != BT_CONFIG) { + if ((bt_sk(sk)->defer_setup && sk->sk_state != BT_CONNECT2) || + (!bt_sk(sk)->defer_setup && sk->sk_state != BT_CONFIG)) { struct l2cap_cmd_rej rej; rej.reason = cpu_to_le16(0x0002); -- cgit v0.10.2 From 163f4dabea4e3be485c17e8f08e3a6468ad31cbf Mon Sep 17 00:00:00 2001 From: Tomas Targownik Date: Thu, 30 Jun 2011 16:30:44 -0300 Subject: Bluetooth: Fix memory leak under page timeouts If the remote device is not present, the connections attemp fails and the struct hci_conn was not freed Signed-off-by: Tomas Targownik Signed-off-by: Gustavo F. Padovan diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index d3a05b9..bcd158f 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -393,6 +393,9 @@ int hci_conn_del(struct hci_conn *conn) hci_dev_put(hdev); + if (conn->handle == 0) + kfree(conn); + return 0; } -- cgit v0.10.2 From daf54f1f363a61c618662ef66d4bf09d2b090941 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 30 Jun 2011 08:59:55 -0400 Subject: drm/radeon/kms: Fix chremap setup on RV770 CE CE variant requires a different chremap setup. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=35472 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 6f508ff..8bb347d 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -575,6 +575,12 @@ static void rv770_program_channel_remap(struct radeon_device *rdev) else tcp_chan_steer = 0x00fac688; + /* RV770 CE has special chremap setup */ + if (rdev->pdev->device == 0x944e) { + tcp_chan_steer = 0x00b08b08; + mc_shared_chremap = 0x00b08b08; + } + WREG32(TCP_CHAN_STEER, tcp_chan_steer); WREG32(MC_SHARED_CHREMAP, mc_shared_chremap); } -- cgit v0.10.2 From 724d4c03066cec0e23b44344ad384fb4ebb7419d Mon Sep 17 00:00:00 2001 From: Henrik Ahlgren Date: Fri, 1 Jul 2011 01:48:35 +0300 Subject: CREDITS: Fix typo David Brownell's CREDITS entry should have N: (name) instead of M: (email). Signed-off-by: Henrik Ahlgren Signed-off-by: Linus Torvalds diff --git a/CREDITS b/CREDITS index d78359f..1deb331 100644 --- a/CREDITS +++ b/CREDITS @@ -518,7 +518,7 @@ N: Zach Brown E: zab@zabbo.net D: maestro pci sound -M: David Brownell +N: David Brownell D: Kernel engineer, mentor, and friend. Maintained USB EHCI and D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few D: device drivers. His encouragement also helped many engineers get -- cgit v0.10.2 From a52a82fc3a397261ecbcbd441498be58997379c8 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 1 Jun 2011 12:57:37 -0300 Subject: [media] media: vb2: add __GFP_NOWARN to dma-sg allocator Add __GFP_NOWARN parameter to videobuf2 dma-sg allocator to prevent kernel warning and stack dump if there is not enough memory available. Videobuf2 and drivers should correctly handle no memory case, so there is no need for stack dump and extensive log. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c index b2d9485..10a20d9 100644 --- a/drivers/media/video/videobuf2-dma-sg.c +++ b/drivers/media/video/videobuf2-dma-sg.c @@ -62,7 +62,7 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size) goto fail_pages_array_alloc; for (i = 0; i < buf->sg_desc.num_pages; ++i) { - buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO); + buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN); if (NULL == buf->pages[i]) goto fail_pages_alloc; sg_set_page(&buf->sg_desc.sglist[i], -- cgit v0.10.2 From bf7b73efb7f52abf56b512546c3bbc35001dd696 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 8 Jun 2011 06:15:05 -0300 Subject: [media] Revert "[media] v4l2: vb2: one more fix for REQBUFS()" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 31901a078af29c33c736dcbf815656920e904632. Queue should be reinitialized on each REQBUFS() call even if the memory access method and buffer count have not been changed. The user might have changed the format and if we go the short path introduced in that commit, the memory buffer will not be reallocated to fit with new format. The previous patch was just over-engineered optimization, which just introduced a bug to videobuf2. Reported-by: Uwe Kleine-König Signed-off-by: Marek Szyprowski CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 6ba1461..6489aa2 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -492,13 +492,6 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) return -EINVAL; } - /* - * If the same number of buffers and memory access method is requested - * then return immediately. - */ - if (q->memory == req->memory && req->count == q->num_buffers) - return 0; - if (req->count == 0 || q->num_buffers != 0 || q->memory != req->memory) { /* * We already have buffers allocated, so first check if they -- cgit v0.10.2 From afdea8bac5e80362459940e18e705d792e677a57 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 10 Jun 2011 08:58:42 -0300 Subject: [media] media: vb2: reset queued_count value during queue reinitialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit queued_count variable was left untouched during the queue reinitialization in __vb2_queue_cancel, what might lead to mismatch between the real number of queued buffers and queued_count variable. Reported-by: Uwe Kleine-König Signed-off-by: Marek Szyprowski CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 6489aa2..84f03b2 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -1189,6 +1189,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q) * has not already dequeued before initiating cancel. */ INIT_LIST_HEAD(&q->done_list); + atomic_set(&q->queued_count, 0); wake_up_all(&q->done_wq); /* -- cgit v0.10.2 From 66072d4fa7cb644f1f064e290f8fddfbd8ccd478 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 28 Jun 2011 08:29:02 -0300 Subject: [media] media: vb2: fix allocation failure check __vb2_queue_alloc function returns the number of successfully allocated buffers. There is no point in checking if the returned value is negative. If this function returns 0, videobuf2 should just return -ENOMEM to userspace, because no driver can work without memory buffers. Reported-by: Jonathan Corbet Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park CC: Pawel Osciak Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 84f03b2..3015e60 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -532,9 +532,9 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) /* Finally, allocate buffers and video memory */ ret = __vb2_queue_alloc(q, req->memory, num_buffers, num_planes, plane_sizes); - if (ret < 0) { - dprintk(1, "Memory allocation failed with error: %d\n", ret); - return ret; + if (ret == 0) { + dprintk(1, "Memory allocation failed\n"); + return -ENOMEM; } /* -- cgit v0.10.2 From ca4186f06fecbf2b692a42cdea54b7ef23b2496c Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Wed, 1 Jun 2011 13:39:46 -0300 Subject: [media] media: omap3isp: fix a potential NULL deref Fix a potential NULL pointer dereference by skipping registration of external entities in case none are provided. This is useful at least when testing mere memory-to-memory scenarios. Signed-off-by: Ohad Ben-Cohen Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c index c9fd04e..94b6ed8 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/video/omap3isp/isp.c @@ -1748,7 +1748,7 @@ static int isp_register_entities(struct isp_device *isp) goto done; /* Register external entities */ - for (subdevs = pdata->subdevs; subdevs->subdevs; ++subdevs) { + for (subdevs = pdata->subdevs; subdevs && subdevs->subdevs; ++subdevs) { struct v4l2_subdev *sensor; struct media_entity *input; unsigned int flags; -- cgit v0.10.2 From c064b8eac8da5d494fd221f14219c4f39502deb2 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 15 Jun 2011 05:20:34 -0300 Subject: [media] v4l: Don't access media entity after is has been destroyed Entities associated with video device nodes are unregistered in video_unregister_device(). This destroys the entity even though it can still be accessed through open video device nodes. Move the media_device_unregister_entity() call from video_unregister_device() to v4l2_device_release() to ensure that the entity isn't unregistered until the last reference to the video device is released. Also remove the media_entity_get()/put() calls from v4l2-dev.c. Those functions were designed for subdevs, to avoid a parent module from being removed while still accessible through board code. They're not currently needed for video device nodes, and will oops when a hotpluggable device is disconnected during streaming, as media_entity_put() called in v4l2_device_release() tries to access entity->parent->dev->driver which is set to NULL when the device is disconnected. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 19d5ae2..06f1400 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -167,6 +167,12 @@ static void v4l2_device_release(struct device *cd) mutex_unlock(&videodev_lock); +#if defined(CONFIG_MEDIA_CONTROLLER) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) + media_device_unregister_entity(&vdev->entity); +#endif + /* Release video_device and perform other cleanups as needed. */ vdev->release(vdev); @@ -389,9 +395,6 @@ static int v4l2_mmap(struct file *filp, struct vm_area_struct *vm) static int v4l2_open(struct inode *inode, struct file *filp) { struct video_device *vdev; -#if defined(CONFIG_MEDIA_CONTROLLER) - struct media_entity *entity = NULL; -#endif int ret = 0; /* Check if the video device is available */ @@ -405,17 +408,6 @@ static int v4l2_open(struct inode *inode, struct file *filp) /* and increase the device refcount */ video_get(vdev); mutex_unlock(&videodev_lock); -#if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && - vdev->vfl_type != VFL_TYPE_SUBDEV) { - entity = media_entity_get(&vdev->entity); - if (!entity) { - ret = -EBUSY; - video_put(vdev); - return ret; - } - } -#endif if (vdev->fops->open) { if (vdev->lock && mutex_lock_interruptible(vdev->lock)) { ret = -ERESTARTSYS; @@ -431,14 +423,8 @@ static int v4l2_open(struct inode *inode, struct file *filp) err: /* decrease the refcount in case of an error */ - if (ret) { -#if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && - vdev->vfl_type != VFL_TYPE_SUBDEV) - media_entity_put(entity); -#endif + if (ret) video_put(vdev); - } return ret; } @@ -455,11 +441,6 @@ static int v4l2_release(struct inode *inode, struct file *filp) if (vdev->lock) mutex_unlock(vdev->lock); } -#if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && - vdev->vfl_type != VFL_TYPE_SUBDEV) - media_entity_put(&vdev->entity); -#endif /* decrease the refcount unconditionally since the release() return value is ignored. */ video_put(vdev); @@ -754,12 +735,6 @@ void video_unregister_device(struct video_device *vdev) if (!vdev || !video_is_registered(vdev)) return; -#if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && - vdev->vfl_type != VFL_TYPE_SUBDEV) - media_device_unregister_entity(&vdev->entity); -#endif - mutex_lock(&videodev_lock); /* This must be in a critical section to prevent a race with v4l2_open. * Once this bit has been cleared video_get may never be called again. -- cgit v0.10.2 From a96aa5342d575980e5b572cde88036f3a878ebee Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 28 Jun 2011 18:17:48 -0300 Subject: [media] uvcvideo: Ignore entities for terminals with no supported format If a streaming interface has no supported format, the driver won't create a video device for the associated terminal. Fix an oops by ignoring that terminal when creating links between entities. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c index c3ab0c8..48fea37 100644 --- a/drivers/media/video/uvc/uvc_entity.c +++ b/drivers/media/video/uvc/uvc_entity.c @@ -27,14 +27,20 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, struct uvc_entity *entity) { const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE; - struct uvc_entity *remote; + struct media_entity *sink; unsigned int i; - u8 remote_pad; - int ret = 0; + int ret; + + sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING) + ? (entity->vdev ? &entity->vdev->entity : NULL) + : &entity->subdev.entity; + if (sink == NULL) + return 0; for (i = 0; i < entity->num_pads; ++i) { struct media_entity *source; - struct media_entity *sink; + struct uvc_entity *remote; + u8 remote_pad; if (!(entity->pads[i].flags & MEDIA_PAD_FL_SINK)) continue; @@ -43,10 +49,11 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, if (remote == NULL) return -EINVAL; - source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING) - ? &remote->vdev->entity : &remote->subdev.entity; - sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING) - ? &entity->vdev->entity : &entity->subdev.entity; + source = (UVC_ENTITY_TYPE(remote) != UVC_TT_STREAMING) + ? (remote->vdev ? &remote->vdev->entity : NULL) + : &remote->subdev.entity; + if (source == NULL) + continue; remote_pad = remote->num_pads - 1; ret = media_entity_create_link(source, remote_pad, @@ -55,11 +62,10 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, return ret; } - if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) - ret = v4l2_device_register_subdev(&chain->dev->vdev, - &entity->subdev); + if (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING) + return 0; - return ret; + return v4l2_device_register_subdev(&chain->dev->vdev, &entity->subdev); } static struct v4l2_subdev_ops uvc_subdev_ops = { @@ -84,9 +90,11 @@ static int uvc_mc_init_entity(struct uvc_entity *entity) ret = media_entity_init(&entity->subdev.entity, entity->num_pads, entity->pads, 0); - } else + } else if (entity->vdev != NULL) { ret = media_entity_init(&entity->vdev->entity, entity->num_pads, entity->pads, 0); + } else + ret = 0; return ret; } -- cgit v0.10.2 From 8ca2c80b170c47eeb55f0c2a0f2b8edf85f35d49 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Tue, 24 May 2011 12:22:03 -0300 Subject: [media] uvcvideo: Remove buffers from the queues when freeing When freeing memory for the video buffers also remove them from the irq & main queues. This fixes an oops when doing the following: open ("/dev/video", ..) VIDIOC_REQBUFS VIDIOC_QBUF VIDIOC_REQBUFS close () As the second VIDIOC_REQBUFS will cause the list entries of the buffers to be cleared while they still hang around on the main and irc queues Signed-off-by: Sjoerd Simons Acked-by: Laurent Pinchart Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 109a063..f90ce9f 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -104,6 +104,8 @@ static int __uvc_free_buffers(struct uvc_video_queue *queue) } if (queue->count) { + uvc_queue_cancel(queue, 0); + INIT_LIST_HEAD(&queue->mainqueue); vfree(queue->mem); queue->count = 0; } -- cgit v0.10.2 From aa122d424b14b4a4c5ba302e668366717e9cac7b Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Mon, 30 May 2011 15:02:00 -0300 Subject: [media] uvcvideo: Disable the queue when failing to start When failing to start the camera we should disable the queue again, to rollback into the same initial state. Otherwise re-trying will always hit -EBUSY Signed-off-by: Sjoerd Simons Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index fc766b9..4999479 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -1255,8 +1255,10 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable) /* Commit the streaming parameters. */ ret = uvc_commit_video(stream, &stream->ctrl); - if (ret < 0) + if (ret < 0) { + uvc_queue_enable(&stream->queue, 0); return ret; + } return uvc_init_video(stream, GFP_KERNEL); } -- cgit v0.10.2 From cd62287e364c0d15d517c6ced4e4808b54711475 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Sat, 4 Jun 2011 15:03:20 +0200 Subject: sched, cgroups: Fix MIN_SHARES on 64-bit boxen Commit c8b28116 ("sched: Increase SCHED_LOAD_SCALE resolution") intended to have no user-visible effect, but allows setting cpu.shares to < MIN_SHARES, which the user then sees. Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Cc: Nikhil Rao Link: http://lkml.kernel.org/r/1307192600.8618.3.camel@marge.simson.net Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 3f2e502..9769c75 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -292,8 +292,8 @@ static DEFINE_SPINLOCK(task_group_lock); * (The default weight is 1024 - so there's no practical * limitation from this.) */ -#define MIN_SHARES 2 -#define MAX_SHARES (1UL << (18 + SCHED_LOAD_RESOLUTION)) +#define MIN_SHARES (1UL << 1) +#define MAX_SHARES (1UL << 18) static int root_task_group_load = ROOT_TASK_GROUP_LOAD; #endif @@ -8450,10 +8450,7 @@ int sched_group_set_shares(struct task_group *tg, unsigned long shares) if (!tg->se[0]) return -EINVAL; - if (shares < MIN_SHARES) - shares = MIN_SHARES; - else if (shares > MAX_SHARES) - shares = MAX_SHARES; + shares = clamp(shares, scale_load(MIN_SHARES), scale_load(MAX_SHARES)); mutex_lock(&shares_mutex); if (tg->shares == shares) -- cgit v0.10.2 From a26474e8649643e82d71e3a386d5c4bcc0b207ef Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Jun 2011 11:41:07 +0200 Subject: x86-32, NUMA: Fix boot regression caused by NUMA init unification on highmem machines During 32/64 NUMA init unification, commit 797390d855 ("x86-32, NUMA: use sparse_memory_present_with_active_regions()") made 32bit mm init call memory_present() automatically from active_regions instead of leaving it to each NUMA init path. This commit description is inaccurate - memory_present() calls aren't the same for flat and numaq. After the commit, memory_present() is only called for the intersection of e820 and NUMA layout. Before, on flatmem, memory_present() would be called from 0 to max_pfn. After, it would be called only on the areas that e820 indicates to be populated. This is how x86_64 works and should be okay as memmap is allowed to contain holes; however, x86_32 DISCONTIGMEM is missing early_pfn_valid(), which makes memmap_init_zone() assume that memmap doesn't contain any hole. This leads to the following oops if e820 map contains holes as it often does on machine with near or more 4GiB of memory by calling pfn_to_page() on a pfn which isn't mapped to a NUMA node, a reported by Conny Seidel: BUG: unable to handle kernel paging request at 000012b0 IP: [] memmap_init_zone+0x6c/0xf2 *pdpt =3D 0000000000000000 *pde =3D f000eef3f000ee00 Oops: 0000 [#1] SMP last sysfs file: Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00164-g797390d #1 To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1 EIP: 0060:[] EFLAGS: 00010012 CPU: 0 EIP is at memmap_init_zone+0x6c/0xf2 EAX: 00000000 EBX: 000a8000 ECX: 000a7fff EDX: f2c00b80 ESI: 000a8000 EDI: f2c00800 EBP: c19ffe54 ESP: c19ffe34 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=3Dc19fe000 task=3Dc1a07f60 task.ti=3Dc19fe000) Stack: 00000002 00000000 0023f000 00000000 10000000 00000a00 f2c00000 f2c00b58 c19ffeb0 c1a80f24 000375fe 00000000 f2c00800 00000800 00000100 00000030 c1abb768 0000003c 00000000 00000000 00000004 00207a02 f2c00800 000375fe Call Trace: [] free_area_init_node+0x358/0x385 [] free_area_init_nodes+0x420/0x487 [] paging_init+0x114/0x11b [] setup_arch+0xb37/0xc0a [] start_kernel+0x76/0x316 [] i386_start_kernel+0xa8/0xb0 This patch fixes the bug by defining early_pfn_valid() to be the same as pfn_valid() when DISCONTIGMEM. Reported-bisected-and-tested-by: Conny Seidel Signed-off-by: Tejun Heo Cc: hans.rosenfeld@amd.com Cc: Christoph Lameter Cc: Conny Seidel Link: http://lkml.kernel.org/r/20110628094107.GB3386@htj.dyndns.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 224e8c5..ffa037f 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -57,6 +57,8 @@ static inline int pfn_valid(int pfn) return 0; } +#define early_pfn_valid(pfn) pfn_valid((pfn)) + #endif /* CONFIG_DISCONTIGMEM */ #ifdef CONFIG_NEED_MULTIPLE_NODES -- cgit v0.10.2 From ee1b3ea9e6171d7a842527a44873f9f51e6f239b Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 21 Jun 2011 07:18:26 -0400 Subject: cifs: set socket send and receive timeouts before attempting connect Benjamin S. reported that he was unable to suspend his machine while it had a cifs share mounted. The freezer caused this to spew when he tried it: -----------------------[snip]------------------ PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... Freezing of tasks failed after 20.01 seconds (1 tasks refusing to freeze, wq_busy=0): cifsd S ffff880127f7b1b0 0 1821 2 0x00800000 ffff880127f7b1b0 0000000000000046 ffff88005fe008a8 ffff8800ffffffff ffff880127cee6b0 0000000000011100 ffff880127737fd8 0000000000004000 ffff880127737fd8 0000000000011100 ffff880127f7b1b0 ffff880127736010 Call Trace: [] ? sk_reset_timer+0xf/0x19 [] ? tcp_connect+0x43c/0x445 [] ? tcp_v4_connect+0x40d/0x47f [] ? schedule_timeout+0x21/0x1ad [] ? _raw_spin_lock_bh+0x9/0x1f [] ? release_sock+0x19/0xef [] ? inet_stream_connect+0x14c/0x24a [] ? autoremove_wake_function+0x0/0x2a [] ? ipv4_connect+0x39c/0x3b5 [cifs] [] ? cifs_reconnect+0x1fc/0x28a [cifs] [] ? cifs_demultiplex_thread+0x397/0xb9f [cifs] [] ? perf_event_exit_task+0xb9/0x1bf [] ? cifs_demultiplex_thread+0x0/0xb9f [cifs] [] ? cifs_demultiplex_thread+0x0/0xb9f [cifs] [] ? kthread+0x7a/0x82 [] ? kernel_thread_helper+0x4/0x10 [] ? kthread+0x0/0x82 [] ? kernel_thread_helper+0x0/0x10 Restarting tasks ... done. -----------------------[snip]------------------ We do attempt to perform a try_to_freeze in cifs_reconnect, but the connection attempt itself seems to be taking longer than 20s to time out. The connect timeout is governed by the socket send and receive timeouts, so we can shorten that period by setting those timeouts before attempting the connect instead of after. Adam Williamson tested the patch and said that it seems to have fixed suspending on his laptop when a cifs share is mounted. Reported-by: Benjamin S Tested-by: Adam Williamson Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 7f540df..c8cb83e 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2474,14 +2474,6 @@ generic_ip_connect(struct TCP_Server_Info *server) if (rc < 0) return rc; - rc = socket->ops->connect(socket, saddr, slen, 0); - if (rc < 0) { - cFYI(1, "Error %d connecting to server", rc); - sock_release(socket); - server->ssocket = NULL; - return rc; - } - /* * Eventually check for other socket options to change from * the default. sock_setsockopt not used because it expects @@ -2510,6 +2502,14 @@ generic_ip_connect(struct TCP_Server_Info *server) socket->sk->sk_sndbuf, socket->sk->sk_rcvbuf, socket->sk->sk_rcvtimeo); + rc = socket->ops->connect(socket, saddr, slen, 0); + if (rc < 0) { + cFYI(1, "Error %d connecting to server", rc); + sock_release(socket); + server->ssocket = NULL; + return rc; + } + if (sport == htons(RFC1001_PORT)) rc = ip_rfc1001_connect(server); -- cgit v0.10.2 From e8bb10b82f3d9fff79751ee392c1c499e3d68365 Mon Sep 17 00:00:00 2001 From: Vladimir Pantelic Date: Tue, 26 Apr 2011 04:28:11 -0300 Subject: [media] OMAP_VOUTLIB: Fix wrong resizer calculation The omap_vout_new_crop() function has possible bug, uses uninitialized variable "crop.width/height" which is actually output of the function. Instead we should be using "try_crop.width/height" to calculate the resizer value. Signed-off-by: Vladimir Pantelic Signed-off-by: Vaibhav Hiremath Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c index 2aa6a76..8ae7481 100644 --- a/drivers/media/video/omap/omap_voutlib.c +++ b/drivers/media/video/omap/omap_voutlib.c @@ -193,7 +193,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix, return -EINVAL; if (cpu_is_omap24xx()) { - if (crop->height != win->w.height) { + if (try_crop.height != win->w.height) { /* If we're resizing vertically, we can't support a * crop width wider than 768 pixels. */ @@ -202,7 +202,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix, } } /* vertical resizing */ - vresize = (1024 * crop->height) / win->w.height; + vresize = (1024 * try_crop.height) / win->w.height; if (cpu_is_omap24xx() && (vresize > 2048)) vresize = 2048; else if (cpu_is_omap34xx() && (vresize > 4096)) @@ -221,7 +221,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix, try_crop.height = 2; } /* horizontal resizing */ - hresize = (1024 * crop->width) / win->w.width; + hresize = (1024 * try_crop.width) / win->w.width; if (cpu_is_omap24xx() && (hresize > 2048)) hresize = 2048; else if (cpu_is_omap34xx() && (hresize > 4096)) -- cgit v0.10.2 From 8f3a307b9afd8c2ebde46ef317df4df3813301a7 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Thu, 16 Jun 2011 15:32:07 -0300 Subject: [media] OMAP_VOUT: Change hardcoded device node number to -1 With addition of media-controller framework, now we have various device nodes (/dev/videoX) getting created, so hardcoding minor number in video_register_device() is not recommended. So let V4L2 framework choose free minor number for the device. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 4ada9be..eb16607 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -2391,7 +2391,7 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev) /* Register the Video device with V4L2 */ vfd = vout->vfd; - if (video_register_device(vfd, VFL_TYPE_GRABBER, k + 1) < 0) { + if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) { dev_err(&pdev->dev, ": Could not register " "Video for Linux device\n"); vfd->minor = -1; -- cgit v0.10.2 From 383e4f69879d11c86ebdd38b3356f6d0690fb4cc Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Thu, 14 Apr 2011 13:42:34 -0300 Subject: [media] omap_vout: Added check in reqbuf & mmap for buf_size allocation The usecase where, user allocates small size of buffer through bootargs (video1_bufsize/video2_bufsize) and later from application tries to set the format which requires larger buffer size, driver doesn't check for insufficient buffer size and allows application to map extra buffer. This leads to kernel crash, when user application tries to access memory beyond the allocation size. Added check in both mmap and reqbuf call back function, and return error if the size of the buffer allocated by user through bootargs is less than the S_FMT size. Signed-off-by: Vaibhav Hiremath Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index eb16607..4d07c58 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -982,6 +982,14 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, startindex = (vout->vid == OMAP_VIDEO1) ? video1_numbuffers : video2_numbuffers; + /* Check the size of the buffer */ + if (*size > vout->buffer_size) { + v4l2_err(&vout->vid_dev->v4l2_dev, + "buffer allocation mismatch [%u] [%u]\n", + *size, vout->buffer_size); + return -ENOMEM; + } + for (i = startindex; i < *count; i++) { vout->buffer_size = *size; @@ -1228,6 +1236,14 @@ static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma) (vma->vm_pgoff << PAGE_SHIFT)); return -EINVAL; } + /* Check the size of the buffer */ + if (size > vout->buffer_size) { + v4l2_err(&vout->vid_dev->v4l2_dev, + "insufficient memory [%lu] [%u]\n", + size, vout->buffer_size); + return -ENOMEM; + } + q->bufs[i]->baddr = vma->vm_start; vma->vm_flags |= VM_RESERVED; -- cgit v0.10.2 From 258c05637d6b6df2478a2808a3d2350c3c6782d6 Mon Sep 17 00:00:00 2001 From: Andre Bartke Date: Fri, 10 Jun 2011 07:57:54 -0300 Subject: [media] V4L: mx1-camera: fix uninitialized variable mx1_camera_add_device() can return an uninitialized value of ret. Signed-off-by: Andre Bartke [g.liakhovetski@gmx.de: modified the fix to remove "ret" completely] Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index bc0c23a..63f8a0c 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -444,12 +444,9 @@ static int mx1_camera_add_device(struct soc_camera_device *icd) { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct mx1_camera_dev *pcdev = ici->priv; - int ret; - if (pcdev->icd) { - ret = -EBUSY; - goto ebusy; - } + if (pcdev->icd) + return -EBUSY; dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n", icd->devnum); @@ -458,8 +455,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd) pcdev->icd = icd; -ebusy: - return ret; + return 0; } static void mx1_camera_remove_device(struct soc_camera_device *icd) -- cgit v0.10.2 From 35d136c8dab034ee14aa00d6082229b4b74607da Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 7 Jun 2011 18:45:17 -0300 Subject: [media] ite-cir: 8709 needs to use pnp resource 2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Thanks to the intrepid testing and debugging of Matthijs van Drunen, it was uncovered that at least some variants of the ITE8709 need to use pnp resource 2, rather than 0, for things to function properly. Resource 0 has a length of only 1, and if you try to bypass the pnp_port_len check and use it anyway (with either a length of 1 or 2), the system in question's trackpad ceased to function. The circa lirc 0.8.7 lirc_ite8709 driver used resource 2, but the value was (amusingly) changed to 0 by way of a patch from ITE themselves, so I don't know if there may be variants where 0 actually *is* correct, but at least in this case and in the original lirc_ite8709 driver author's case, it sure looks like 2 is the right value. This fix should probably be applied to all stable kernels with the ite-cir driver, lest we nuke more people's trackpads. Tested-by: Matthijs van Drunen CC: Juan Jesús García de Soria CC: stable@kernel.org Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c index e716b93..ecd3d02 100644 --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -1347,6 +1347,7 @@ static const struct ite_dev_params ite_dev_descs[] = { { /* 0: ITE8704 */ .model = "ITE8704 CIR transceiver", .io_region_size = IT87_IOREG_LENGTH, + .io_rsrc_no = 0, .hw_tx_capable = true, .sample_period = (u32) (1000000000ULL / 115200), .tx_carrier_freq = 38000, @@ -1371,6 +1372,7 @@ static const struct ite_dev_params ite_dev_descs[] = { { /* 1: ITE8713 */ .model = "ITE8713 CIR transceiver", .io_region_size = IT87_IOREG_LENGTH, + .io_rsrc_no = 0, .hw_tx_capable = true, .sample_period = (u32) (1000000000ULL / 115200), .tx_carrier_freq = 38000, @@ -1395,6 +1397,7 @@ static const struct ite_dev_params ite_dev_descs[] = { { /* 2: ITE8708 */ .model = "ITE8708 CIR transceiver", .io_region_size = IT8708_IOREG_LENGTH, + .io_rsrc_no = 0, .hw_tx_capable = true, .sample_period = (u32) (1000000000ULL / 115200), .tx_carrier_freq = 38000, @@ -1420,6 +1423,7 @@ static const struct ite_dev_params ite_dev_descs[] = { { /* 3: ITE8709 */ .model = "ITE8709 CIR transceiver", .io_region_size = IT8709_IOREG_LENGTH, + .io_rsrc_no = 2, .hw_tx_capable = true, .sample_period = (u32) (1000000000ULL / 115200), .tx_carrier_freq = 38000, @@ -1461,6 +1465,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id struct rc_dev *rdev = NULL; int ret = -ENOMEM; int model_no; + int io_rsrc_no; ite_dbg("%s called", __func__); @@ -1490,10 +1495,11 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id /* get the description for the device */ dev_desc = &ite_dev_descs[model_no]; + io_rsrc_no = dev_desc->io_rsrc_no; /* validate pnp resources */ - if (!pnp_port_valid(pdev, 0) || - pnp_port_len(pdev, 0) != dev_desc->io_region_size) { + if (!pnp_port_valid(pdev, io_rsrc_no) || + pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) { dev_err(&pdev->dev, "IR PNP Port not valid!\n"); goto failure; } @@ -1504,7 +1510,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id } /* store resource values */ - itdev->cir_addr = pnp_port_start(pdev, 0); + itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no); itdev->cir_irq = pnp_irq(pdev, 0); /* initialize spinlocks */ diff --git a/drivers/media/rc/ite-cir.h b/drivers/media/rc/ite-cir.h index 16a19f5..aa899a0 100644 --- a/drivers/media/rc/ite-cir.h +++ b/drivers/media/rc/ite-cir.h @@ -57,6 +57,9 @@ struct ite_dev_params { /* size of the I/O region */ int io_region_size; + /* IR pnp I/O resource number */ + int io_rsrc_no; + /* true if the hardware supports transmission */ bool hw_tx_capable; -- cgit v0.10.2 From 1ba9268c2bfeebfd70193145685e12faeae92882 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 8 Jun 2011 15:00:01 -0300 Subject: [media] keymaps: fix table for pinnacle pctv hd devices Both consumers of RC_MAP_PINNACLE_PCTV_HD send along full RC-5 scancodes, so this update makes this keymap actually *have* full scancodes, heisted from rc-dib0700-rc5.c. This should fix out of the box remote functionality for the Pinnacle PCTV HD 800i (cx88 pci card) and PCTV HD Pro 801e (em28xx usb stick). CC: stable@kernel.org Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c index bb10ffe..8d558ae 100644 --- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c +++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c @@ -15,43 +15,39 @@ /* Pinnacle PCTV HD 800i mini remote */ static struct rc_map_table pinnacle_pctv_hd[] = { - - { 0x0f, KEY_1 }, - { 0x15, KEY_2 }, - { 0x10, KEY_3 }, - { 0x18, KEY_4 }, - { 0x1b, KEY_5 }, - { 0x1e, KEY_6 }, - { 0x11, KEY_7 }, - { 0x21, KEY_8 }, - { 0x12, KEY_9 }, - { 0x27, KEY_0 }, - - { 0x24, KEY_ZOOM }, - { 0x2a, KEY_SUBTITLE }, - - { 0x00, KEY_MUTE }, - { 0x01, KEY_ENTER }, /* Pinnacle Logo */ - { 0x39, KEY_POWER }, - - { 0x03, KEY_VOLUMEUP }, - { 0x09, KEY_VOLUMEDOWN }, - { 0x06, KEY_CHANNELUP }, - { 0x0c, KEY_CHANNELDOWN }, - - { 0x2d, KEY_REWIND }, - { 0x30, KEY_PLAYPAUSE }, - { 0x33, KEY_FASTFORWARD }, - { 0x3c, KEY_STOP }, - { 0x36, KEY_RECORD }, - { 0x3f, KEY_EPG }, /* Labeled "?" */ + /* Key codes for the tiny Pinnacle remote*/ + { 0x0700, KEY_MUTE }, + { 0x0701, KEY_MENU }, /* Pinnacle logo */ + { 0x0739, KEY_POWER }, + { 0x0703, KEY_VOLUMEUP }, + { 0x0709, KEY_VOLUMEDOWN }, + { 0x0706, KEY_CHANNELUP }, + { 0x070c, KEY_CHANNELDOWN }, + { 0x070f, KEY_1 }, + { 0x0715, KEY_2 }, + { 0x0710, KEY_3 }, + { 0x0718, KEY_4 }, + { 0x071b, KEY_5 }, + { 0x071e, KEY_6 }, + { 0x0711, KEY_7 }, + { 0x0721, KEY_8 }, + { 0x0712, KEY_9 }, + { 0x0727, KEY_0 }, + { 0x0724, KEY_ZOOM }, /* 'Square' key */ + { 0x072a, KEY_SUBTITLE }, /* 'T' key */ + { 0x072d, KEY_REWIND }, + { 0x0730, KEY_PLAYPAUSE }, + { 0x0733, KEY_FASTFORWARD }, + { 0x0736, KEY_RECORD }, + { 0x073c, KEY_STOP }, + { 0x073f, KEY_HELP }, /* '?' key */ }; static struct rc_map_list pinnacle_pctv_hd_map = { .map = { .scan = pinnacle_pctv_hd, .size = ARRAY_SIZE(pinnacle_pctv_hd), - .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .rc_type = RC_TYPE_RC5, .name = RC_MAP_PINNACLE_PCTV_HD, } }; -- cgit v0.10.2 From 6a8c97ac92461ec57e36b10572e78d4221e8faa8 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 8 Jun 2011 18:56:56 -0300 Subject: [media] lirc_zilog: fix spinning rx thread We were calling schedule_timeout with the rx thread's task state still at TASK_RUNNING, which it shouldn't be. Make sure we call set_current_state(TASK_INTERRUPTIBLE) *before* schedule_timeout, and we're all good here. I believe this problem was mistakenly introduced in commit 5bd6b0464b68d429bc8a3fe6595d19c39dfc4d95, and I'm not sure how I missed it before, as I swear I tested the patchset that was included in, but alas, stuff happens... Acked-by: Andy Walls CC: stable@kernel.org Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index dd6a57c..4e051f6 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -475,14 +475,14 @@ static int lirc_thread(void *arg) dprintk("poll thread started\n"); while (!kthread_should_stop()) { + set_current_state(TASK_INTERRUPTIBLE); + /* if device not opened, we can sleep half a second */ if (atomic_read(&ir->open_count) == 0) { schedule_timeout(HZ/2); continue; } - set_current_state(TASK_INTERRUPTIBLE); - /* * This is ~113*2 + 24 + jitter (2*repeat gap + code length). * We use this interval as the chip resets every time you poll -- cgit v0.10.2 From c4b0afee3c1730cf9b0f6ad21729928d23d3918e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 13 Jun 2011 15:32:26 -0300 Subject: [media] [staging] lirc_serial: allocate irq at init time There's really no good reason not to just grab the desired IRQ at driver init time, instead of every time the lirc device node is accessed. This also improves the speed and reliability with which a serial transmitter can operate, as back-to-back transmission attempts (i.e., channel change to a multi-digit channel) don't have to spend time acquiring and then releasing the IRQ for every digit, sometimes multiple times, if lircd has been told to use the min_repeat parameter. CC: devel@driverdev.osuosl.org Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c index 4a3cca0..805df91 100644 --- a/drivers/staging/lirc/lirc_serial.c +++ b/drivers/staging/lirc/lirc_serial.c @@ -838,7 +838,23 @@ static int hardware_init_port(void) static int init_port(void) { - int i, nlow, nhigh; + int i, nlow, nhigh, result; + + result = request_irq(irq, irq_handler, + IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0), + LIRC_DRIVER_NAME, (void *)&hardware); + + switch (result) { + case -EBUSY: + printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq); + return -EBUSY; + case -EINVAL: + printk(KERN_ERR LIRC_DRIVER_NAME + ": Bad irq number or handler\n"); + return -EINVAL; + default: + break; + }; /* Reserve io region. */ /* @@ -893,34 +909,17 @@ static int init_port(void) printk(KERN_INFO LIRC_DRIVER_NAME ": Manually using active " "%s receiver\n", sense ? "low" : "high"); + dprintk("Interrupt %d, port %04x obtained\n", irq, io); return 0; } static int set_use_inc(void *data) { - int result; unsigned long flags; /* initialize timestamp */ do_gettimeofday(&lasttv); - result = request_irq(irq, irq_handler, - IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0), - LIRC_DRIVER_NAME, (void *)&hardware); - - switch (result) { - case -EBUSY: - printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq); - return -EBUSY; - case -EINVAL: - printk(KERN_ERR LIRC_DRIVER_NAME - ": Bad irq number or handler\n"); - return -EINVAL; - default: - dprintk("Interrupt %d, port %04x obtained\n", irq, io); - break; - } - spin_lock_irqsave(&hardware[type].lock, flags); /* Set DLAB 0. */ @@ -945,10 +944,6 @@ static void set_use_dec(void *data) soutp(UART_IER, sinp(UART_IER) & (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); spin_unlock_irqrestore(&hardware[type].lock, flags); - - free_irq(irq, (void *)&hardware); - - dprintk("freed IRQ %d\n", irq); } static ssize_t lirc_write(struct file *file, const char *buf, @@ -1256,6 +1251,9 @@ exit_serial_exit: static void __exit lirc_serial_exit_module(void) { lirc_serial_exit(); + + free_irq(irq, (void *)&hardware); + if (iommap != 0) release_mem_region(iommap, 8 << ioshift); else -- cgit v0.10.2 From 3f5c4c73322e4d6f3d40b697dac3073d2adffe41 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 16 Jun 2011 16:18:37 -0300 Subject: [media] rc: fix ghost keypresses with certain hw With hardware that has to use ir_raw_event_store_edge to collect IR sample durations, we were not doing an event reset unless IR_MAX_DURATION had passed. That's around 4 seconds. So if someone presses up, then down, with less than 4 seconds in between, they'd get the initial up, then up and down upon pressing down. To fix this, I've lowered the "send a reset event" logic's threshold to the input device's REP_DELAY (defaults to 500ms), and with an saa7134-based GPIO-driven IR receiver in a Hauppauge HVR-1150, I get *much* better behavior out of the remote now. Special thanks to Devin for providing the hardware to investigate this issue. CC: stable@kernel.org CC: Devin Heitmueller Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index 11c19d8..423ed45 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -114,18 +114,20 @@ int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type) s64 delta; /* ns */ DEFINE_IR_RAW_EVENT(ev); int rc = 0; + int delay; if (!dev->raw) return -EINVAL; now = ktime_get(); delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event)); + delay = MS_TO_NS(dev->input_dev->rep[REP_DELAY]); /* Check for a long duration since last event or if we're * being called for the first time, note that delta can't * possibly be negative. */ - if (delta > IR_MAX_DURATION || !dev->raw->last_type) + if (delta > delay || !dev->raw->last_type) type |= IR_START_EVENT; else ev.duration = delta; -- cgit v0.10.2 From 9800b5b619cd9a013a6f0c7d5da0dbbc17a5af30 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 16 Jun 2011 17:30:48 -0300 Subject: [media] saa7134: fix raw IR timeout value The comment says "wait 15ms", but the code says jiffies_to_msecs(15) instead of msecs_to_jiffies(15). Fix that. Tested, works fine with both rc5 and rc6 decode, in-kernel and via lirc userspace, with an HVR-1150. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index ff6c0e9..d4ee24b 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -963,7 +963,7 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev) * to work with other protocols. */ if (!ir->active) { - timeout = jiffies + jiffies_to_msecs(15); + timeout = jiffies + msecs_to_jiffies(15); mod_timer(&ir->timer, timeout); ir->active = true; } -- cgit v0.10.2 From 842071c9ea021a42256386cb0cbe3735af33c4db Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 20 Jun 2011 00:04:05 -0300 Subject: [media] imon: auto-config ffdc 7e device Another device with the 0xffdc device id, this one with 0x7e in the config byte. Its an iMON VFD + RC6 IR, in a CoolerMaster 260 case. Reported-by: Filip Streibl Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 7136582..ba48032 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1751,6 +1751,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx) break; /* iMON VFD, MCE IR */ case 0x46: + case 0x7e: case 0x9e: dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR"); detected_display_type = IMON_DISPLAY_TYPE_VFD; -- cgit v0.10.2 From 372b4249243d1e7c12a0f2b67e7badc608fcff45 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 20 Jun 2011 00:07:13 -0300 Subject: [media] imon: allow either proto on unknown 0xffdc While 0xffdc devices have their IR protocol hard-coded into the firmware of the device, we have no known way of telling what it is if we don't have the device's config byte already in the driver. Unknown devices default to the imon native protocol, but might actually be rc6, so we should set the driver up such that the user can load the rc6 keytable from userspace and still have a working device ahead of its config byte being added to the driver. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index ba48032..6bc35ee 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1767,6 +1767,9 @@ static void imon_get_ffdc_type(struct imon_context *ictx) dev_info(ictx->dev, "Unknown 0xffdc device, " "defaulting to VFD and iMON IR"); detected_display_type = IMON_DISPLAY_TYPE_VFD; + /* We don't know which one it is, allow user to set the + * RC6 one from userspace if OTHER wasn't correct. */ + allowed_protos |= RC_TYPE_RC6; break; } -- cgit v0.10.2 From 98c32bcded0e249fd48726930ae9f393e0e318b4 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 23 Jun 2011 10:40:55 -0300 Subject: [media] rc: call input_sync after scancode reports Due to commit cdda911c34006f1089f3c87b1a1f31ab3a4722f2, evdev only becomes readable when the buffer contains an EV_SYN/SYN_REPORT event. If we get a repeat or a scancode we don't have a mapping for, we never call input_sync, and thus those events don't get reported in a timely fashion. For example, take an mceusb transceiver with a default rc6 keymap. Press buttons on an rc5 remote while monitoring with ir-keytable, and you'll see nothing. Now press a button on the rc6 remote matching the keymap. You'll suddenly get the rc5 key scancodes, the rc6 scancode and the rc6 key spit out all at the same time. Pressing and holding a button on a remote we do have a keymap for also works rather unreliably right now, due to repeat events also happening without a call to input_sync (we bail from ir_do_keydown before getting to the point where it calls input_sync). Easy fix though, just add two strategically placed input_sync calls right after our input_event calls for EV_MSC, and all is well again. Technically, we probably should have been doing this all along, its just that it never caused any functional difference until the referenced change went into the input layer. input_sync once per IR signal. There was another hidden bug in the code where we were calling input_report_key using last_keycode instead of our just discovered keycode, which manifested with the reordering of calling input_report_key and setting last_keycode. Reported-by: Stephan Raue CC: Stephan Raue CC: Mauro Carvalho Chehab CC: Jeff Brown Acked-by: Dmitry Torokhov Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index f57cd56..3186ac7 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -522,18 +522,20 @@ EXPORT_SYMBOL_GPL(rc_g_keycode_from_table); /** * ir_do_keyup() - internal function to signal the release of a keypress * @dev: the struct rc_dev descriptor of the device + * @sync: whether or not to call input_sync * * This function is used internally to release a keypress, it must be * called with keylock held. */ -static void ir_do_keyup(struct rc_dev *dev) +static void ir_do_keyup(struct rc_dev *dev, bool sync) { if (!dev->keypressed) return; IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode); input_report_key(dev->input_dev, dev->last_keycode, 0); - input_sync(dev->input_dev); + if (sync) + input_sync(dev->input_dev); dev->keypressed = false; } @@ -549,7 +551,7 @@ void rc_keyup(struct rc_dev *dev) unsigned long flags; spin_lock_irqsave(&dev->keylock, flags); - ir_do_keyup(dev); + ir_do_keyup(dev, true); spin_unlock_irqrestore(&dev->keylock, flags); } EXPORT_SYMBOL_GPL(rc_keyup); @@ -578,7 +580,7 @@ static void ir_timer_keyup(unsigned long cookie) */ spin_lock_irqsave(&dev->keylock, flags); if (time_is_before_eq_jiffies(dev->keyup_jiffies)) - ir_do_keyup(dev); + ir_do_keyup(dev, true); spin_unlock_irqrestore(&dev->keylock, flags); } @@ -597,6 +599,7 @@ void rc_repeat(struct rc_dev *dev) spin_lock_irqsave(&dev->keylock, flags); input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode); + input_sync(dev->input_dev); if (!dev->keypressed) goto out; @@ -622,29 +625,28 @@ EXPORT_SYMBOL_GPL(rc_repeat); static void ir_do_keydown(struct rc_dev *dev, int scancode, u32 keycode, u8 toggle) { - input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode); - - /* Repeat event? */ - if (dev->keypressed && - dev->last_scancode == scancode && - dev->last_toggle == toggle) - return; + bool new_event = !dev->keypressed || + dev->last_scancode != scancode || + dev->last_toggle != toggle; - /* Release old keypress */ - ir_do_keyup(dev); + if (new_event && dev->keypressed) + ir_do_keyup(dev, false); - dev->last_scancode = scancode; - dev->last_toggle = toggle; - dev->last_keycode = keycode; + input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode); - if (keycode == KEY_RESERVED) - return; + if (new_event && keycode != KEY_RESERVED) { + /* Register a keypress */ + dev->keypressed = true; + dev->last_scancode = scancode; + dev->last_toggle = toggle; + dev->last_keycode = keycode; + + IR_dprintk(1, "%s: key down event, " + "key 0x%04x, scancode 0x%04x\n", + dev->input_name, keycode, scancode); + input_report_key(dev->input_dev, keycode, 1); + } - /* Register a keypress */ - dev->keypressed = true; - IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n", - dev->input_name, keycode, scancode); - input_report_key(dev->input_dev, dev->last_keycode, 1); input_sync(dev->input_dev); } -- cgit v0.10.2 From 0466dcbeda72e6a2753cd7e81f0a190054bd2233 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 1 Jul 2011 12:46:56 +0200 Subject: Update version number references in README When 3.0 is released I believe the README should reflect the new numbering. Signed-off-by: Jesper Juhl Signed-off-by: Linus Torvalds diff --git a/README b/README index 8510017..0d5a7dd 100644 --- a/README +++ b/README @@ -1,6 +1,6 @@ - Linux kernel release 2.6.xx + Linux kernel release 3.x -These are the release notes for Linux version 2.6. Read them carefully, +These are the release notes for Linux version 3. Read them carefully, as they tell you what this is all about, explain how to install the kernel, and what to do if something goes wrong. @@ -62,10 +62,10 @@ INSTALLING the kernel source: directory where you have permissions (eg. your home directory) and unpack it: - gzip -cd linux-2.6.XX.tar.gz | tar xvf - + gzip -cd linux-3.X.tar.gz | tar xvf - or - bzip2 -dc linux-2.6.XX.tar.bz2 | tar xvf - + bzip2 -dc linux-3.X.tar.bz2 | tar xvf - Replace "XX" with the version number of the latest kernel. @@ -75,15 +75,15 @@ INSTALLING the kernel source: files. They should match the library, and not get messed up by whatever the kernel-du-jour happens to be. - - You can also upgrade between 2.6.xx releases by patching. Patches are + - You can also upgrade between 3.x releases by patching. Patches are distributed in the traditional gzip and the newer bzip2 format. To install by patching, get all the newer patch files, enter the - top level directory of the kernel source (linux-2.6.xx) and execute: + top level directory of the kernel source (linux-3.x) and execute: - gzip -cd ../patch-2.6.xx.gz | patch -p1 + gzip -cd ../patch-3.x.gz | patch -p1 or - bzip2 -dc ../patch-2.6.xx.bz2 | patch -p1 + bzip2 -dc ../patch-3.x.bz2 | patch -p1 (repeat xx for all versions bigger than the version of your current source tree, _in_order_) and you should be ok. You may want to remove @@ -91,9 +91,9 @@ INSTALLING the kernel source: failed patches (xxx# or xxx.rej). If there are, either you or me has made a mistake. - Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels + Unlike patches for the 3.x kernels, patches for the 3.x.y kernels (also known as the -stable kernels) are not incremental but instead apply - directly to the base 2.6.x kernel. Please read + directly to the base 3.x kernel. Please read Documentation/applying-patches.txt for more information. Alternatively, the script patch-kernel can be used to automate this @@ -107,14 +107,14 @@ INSTALLING the kernel source: an alternative directory can be specified as the second argument. - If you are upgrading between releases using the stable series patches - (for example, patch-2.6.xx.y), note that these "dot-releases" are - not incremental and must be applied to the 2.6.xx base tree. For - example, if your base kernel is 2.6.12 and you want to apply the - 2.6.12.3 patch, you do not and indeed must not first apply the - 2.6.12.1 and 2.6.12.2 patches. Similarly, if you are running kernel - version 2.6.12.2 and want to jump to 2.6.12.3, you must first - reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying - the 2.6.12.3 patch. + (for example, patch-3.x.y), note that these "dot-releases" are + not incremental and must be applied to the 3.x base tree. For + example, if your base kernel is 3.0 and you want to apply the + 3.0.3 patch, you do not and indeed must not first apply the + 3.0.1 and 3.0.2 patches. Similarly, if you are running kernel + version 3.0.2 and want to jump to 3.0.3, you must first + reverse the 3.0.2 patch (that is, patch -R) _before_ applying + the 3.0.3 patch. You can read more on this in Documentation/applying-patches.txt - Make sure you have no stale .o files and dependencies lying around: @@ -126,7 +126,7 @@ INSTALLING the kernel source: SOFTWARE REQUIREMENTS - Compiling and running the 2.6.xx kernels requires up-to-date + Compiling and running the 3.x kernels requires up-to-date versions of various software packages. Consult Documentation/Changes for the minimum version numbers required and how to get updates for these packages. Beware that using @@ -142,11 +142,11 @@ BUILD directory for the kernel: Using the option "make O=output/dir" allow you to specify an alternate place for the output files (including .config). Example: - kernel source code: /usr/src/linux-2.6.N + kernel source code: /usr/src/linux-3.N build directory: /home/name/build/kernel To configure and build the kernel use: - cd /usr/src/linux-2.6.N + cd /usr/src/linux-3.N make O=/home/name/build/kernel menuconfig make O=/home/name/build/kernel sudo make O=/home/name/build/kernel modules_install install -- cgit v0.10.2 From 2b1ecb7337592a7bf0989efac46a5b52daab769e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 1 Jul 2011 11:08:56 -0700 Subject: drm/i915: apply HWSTAM writes to Ivy Bridge as well In an attempt to fix 38862 and 38863. Signed-off-by: Jesse Barnes Tested-by: Kenneth Graunke Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 226d8b2..3b03f85 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1740,7 +1740,7 @@ static void ironlake_irq_preinstall(struct drm_device *dev) INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work); I915_WRITE(HWSTAM, 0xeffe); - if (IS_GEN6(dev)) { + if (IS_GEN6(dev) || IS_GEN7(dev)) { /* Workaround stalls observed on Sandy Bridge GPUs by * making the blitter command streamer generate a * write to the Hardware Status Page for -- cgit v0.10.2 From 8208441be21eb3df448e171c4e5cf92756f287da Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 1 Jul 2011 13:18:28 -0400 Subject: drm/radeon/kms: use correct reg on fusion when reading back mem config Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 12d2fdc..e8a5ffb 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2248,7 +2248,10 @@ int evergreen_mc_init(struct radeon_device *rdev) /* Get VRAM informations */ rdev->mc.vram_is_ddr = true; - tmp = RREG32(MC_ARB_RAMCFG); + if (rdev->flags & RADEON_IS_IGP) + tmp = RREG32(FUS_MC_ARB_RAMCFG); + else + tmp = RREG32(MC_ARB_RAMCFG); if (tmp & CHANSIZE_OVERRIDE) { chansize = 16; } else if (tmp & CHANSIZE_MASK) { -- cgit v0.10.2 From 2498c41e1b6aaa1929d13cae9ff1cb6226887078 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 1 Jul 2011 12:58:54 -0400 Subject: drm/radeon/kms: fix typo in cayman reg offset Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h index 9736746..4672869 100644 --- a/drivers/gpu/drm/radeon/nid.h +++ b/drivers/gpu/drm/radeon/nid.h @@ -320,7 +320,7 @@ #define CGTS_USER_TCC_DISABLE 0x914C #define TCC_DISABLE_MASK 0xFFFF0000 #define TCC_DISABLE_SHIFT 16 -#define CGTS_SM_CTRL_REG 0x915C +#define CGTS_SM_CTRL_REG 0x9150 #define OVERRIDE (1 << 21) #define TA_CNTL_AUX 0x9508 -- cgit v0.10.2 From 6002525170df5f72c92ab946b6ebf1656aaec74d Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 1 Jul 2011 18:00:51 +1000 Subject: Revert "drm/nvc0: recognise 0xdX chipsets as NV_C0" Oh boy. That was a bad gamble. PDISP has changed. This reverts commit cdf81a235f11c8a55023c6b181d21d519a8a5967. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index 144f79a..731acea 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -371,7 +371,6 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->vram.flags_valid = nv50_vram_flags_valid; break; case 0xC0: - case 0xD0: engine->instmem.init = nvc0_instmem_init; engine->instmem.takedown = nvc0_instmem_takedown; engine->instmem.suspend = nvc0_instmem_suspend; @@ -923,7 +922,6 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) dev_priv->card_type = NV_50; break; case 0xc0: - case 0xd0: dev_priv->card_type = NV_C0; break; default: -- cgit v0.10.2 From 3140d5b2664309253ba465a14c89fe4f59c0359b Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Sat, 25 Jun 2011 23:37:29 +0200 Subject: USB: fsl_udc_core: fix build breakage when building for ARM arch Commit 09ba0def (USB: fsl_udc_core: prepare for SoCs with BE registers and descriptors) introduced build breakage on ARM arch. Fix it by setting accessors using a static inline function which is a nop when compiling the driver for ARM arch. Commit 2ea6698 (USB: fsl_udc_core: support device mode of MPC5121E DR USB Controller) caused another breakage on ARM by using flush_dcache_range(). Don't use it, convert to the DMA API usage instead. USB2.0CV Halt Endpoint Test succeeds on PPC. Tested both on ARM i.MX31 and mpc5121 PPC, also with CONFIG_DMA_API_DEBUG enabled. Signed-off-by: Anatolij Gustschin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 2cd9a60..4e48331 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -46,7 +46,6 @@ #include #include #include -#include #include "fsl_usb2_udc.h" @@ -118,6 +117,17 @@ static void (*_fsl_writel)(u32 v, unsigned __iomem *p); #define fsl_readl(p) (*_fsl_readl)((p)) #define fsl_writel(v, p) (*_fsl_writel)((v), (p)) +static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) +{ + if (pdata->big_endian_mmio) { + _fsl_readl = _fsl_readl_be; + _fsl_writel = _fsl_writel_be; + } else { + _fsl_readl = _fsl_readl_le; + _fsl_writel = _fsl_writel_le; + } +} + static inline u32 cpu_to_hc32(const u32 x) { return udc_controller->pdata->big_endian_desc @@ -132,6 +142,8 @@ static inline u32 hc32_to_cpu(const u32 x) : le32_to_cpu((__force __le32)x); } #else /* !CONFIG_PPC32 */ +static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) {} + #define fsl_readl(addr) readl(addr) #define fsl_writel(val32, addr) writel(val32, addr) #define cpu_to_hc32(x) cpu_to_le32(x) @@ -1277,6 +1289,11 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction) req->req.complete = NULL; req->dtd_count = 0; + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + if (fsl_req_to_dtd(req) == 0) fsl_queue_td(ep, req); else @@ -1348,9 +1365,6 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, /* Fill in the reqest structure */ *((u16 *) req->req.buf) = cpu_to_le16(tmp); - /* flush cache for the req buffer */ - flush_dcache_range((u32)req->req.buf, (u32)req->req.buf + 8); - req->ep = ep; req->req.length = 2; req->req.status = -EINPROGRESS; @@ -1358,6 +1372,11 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, req->req.complete = NULL; req->dtd_count = 0; + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + /* prime the data phase */ if ((fsl_req_to_dtd(req) == 0)) fsl_queue_td(ep, req); @@ -2354,7 +2373,6 @@ static int __init struct_udc_setup(struct fsl_udc *udc, struct fsl_req, req); /* allocate a small amount of memory to get valid address */ udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); - udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); udc->resume_state = USB_STATE_NOTATTACHED; udc->usb_state = USB_STATE_POWERED; @@ -2470,13 +2488,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) } /* Set accessors only after pdata->init() ! */ - if (pdata->big_endian_mmio) { - _fsl_readl = _fsl_readl_be; - _fsl_writel = _fsl_writel_be; - } else { - _fsl_readl = _fsl_readl_le; - _fsl_writel = _fsl_writel_le; - } + fsl_set_accessors(pdata); #ifndef CONFIG_ARCH_MXC if (pdata->have_sysif_regs) -- cgit v0.10.2 From e534c5b831c8b8e9f5edee5c8a37753c808b80dc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 1 Jul 2011 16:43:02 -0400 Subject: USB: fix regression occurring during device removal This patch (as1476) fixes a regression introduced by fccf4e86200b8f5edd9a65da26f150e32ba79808 (USB: Free bandwidth when usb_disable_device is called). usb_disconnect() grabs the bandwidth_mutex before calling usb_disable_device(), which calls down indirectly to usb_set_interface(), which tries to acquire the bandwidth_mutex. The fix causes usb_set_interface() to return early when it is called for an interface that has already been unregistered, which is what happens in usb_disable_device(). Signed-off-by: Alan Stern Tested-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 64c7ab4..e0719b4 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1286,6 +1286,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) interface); return -EINVAL; } + if (iface->unregistering) + return -ENODEV; alt = usb_altnum_to_altsetting(iface, alternate); if (!alt) { -- cgit v0.10.2 From 7f2c0662e5cfd05f12ca49109e8f787bf2d87b66 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 25 Jun 2011 12:42:14 -0700 Subject: hwmon: (pmbus) Drop check for PMBus revision register in probe function Some PMBus devices do not support the PMBus revision register, so don't check if it exists. Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson Cc: stable.kernel.org # 2.6.39 diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c index 354770e..744672c 100644 --- a/drivers/hwmon/pmbus_core.c +++ b/drivers/hwmon/pmbus_core.c @@ -1430,14 +1430,9 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* - * Bail out if status register or PMBus revision register - * does not exist. - */ - if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0 - || i2c_smbus_read_byte_data(client, PMBUS_REVISION) < 0) { - dev_err(&client->dev, - "Status or revision register not found\n"); + /* Bail out if PMBus status register does not exist. */ + if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0) { + dev_err(&client->dev, "PMBus status register not found\n"); ret = -ENODEV; goto out_data; } -- cgit v0.10.2 From 3b33ca41227a54a78446fb0d7a6fdb9862f563db Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 30 Jun 2011 02:30:03 -0700 Subject: hwmon: (adm1275) Free allocated memory if probe function fails Probe function did not free allocated memory if it failed. Fix it. Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson diff --git a/drivers/hwmon/adm1275.c b/drivers/hwmon/adm1275.c index c2ee204..b9b7caf 100644 --- a/drivers/hwmon/adm1275.c +++ b/drivers/hwmon/adm1275.c @@ -32,6 +32,7 @@ static int adm1275_probe(struct i2c_client *client, const struct i2c_device_id *id) { int config; + int ret; struct pmbus_driver_info *info; if (!i2c_check_functionality(client->adapter, @@ -43,8 +44,10 @@ static int adm1275_probe(struct i2c_client *client, return -ENOMEM; config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); - if (config < 0) - return config; + if (config < 0) { + ret = config; + goto err_mem; + } info->pages = 1; info->direct[PSC_VOLTAGE_IN] = true; @@ -76,7 +79,14 @@ static int adm1275_probe(struct i2c_client *client, else info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; - return pmbus_do_probe(client, id, info); + ret = pmbus_do_probe(client, id, info); + if (ret) + goto err_mem; + return 0; + +err_mem: + kfree(info); + return ret; } static int adm1275_remove(struct i2c_client *client) -- cgit v0.10.2 From 81ae68142a0483b3791cba99eab268859858f508 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 30 Jun 2011 06:54:05 -0700 Subject: hwmon: (pmbus) Improve fan detection Some PMBus devices return no error when reading fan speed registers, but don't really support fans. Strengthen fan detection by also checking if fan configuration registers exist. Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson Cc: stable.kernel.org # 2.6.39 diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus.c index 98e2e28..b0ea00b 100644 --- a/drivers/hwmon/pmbus.c +++ b/drivers/hwmon/pmbus.c @@ -47,12 +47,14 @@ static void pmbus_find_sensor_groups(struct i2c_client *client, if (info->func[0] && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) info->func[0] |= PMBUS_HAVE_STATUS_INPUT; - if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { info->func[0] |= PMBUS_HAVE_FAN12; if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) info->func[0] |= PMBUS_HAVE_STATUS_FAN12; } - if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { info->func[0] |= PMBUS_HAVE_FAN34; if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) info->func[0] |= PMBUS_HAVE_STATUS_FAN34; -- cgit v0.10.2 From 0e502ec889d33bfcb348e420d7e105bc61c45eb4 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 30 Jun 2011 06:57:41 -0700 Subject: hwmon: (pmbus) Auto-detect temp2 and temp3 registers/attributes Additional temperature attribute support is easy to detect, so do it. Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson Cc: stable.kernel.org # 2.6.39 diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus.c index b0ea00b..931d940 100644 --- a/drivers/hwmon/pmbus.c +++ b/drivers/hwmon/pmbus.c @@ -65,6 +65,10 @@ static void pmbus_find_sensor_groups(struct i2c_client *client, PMBUS_STATUS_TEMPERATURE)) info->func[0] |= PMBUS_HAVE_STATUS_TEMP; } + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) + info->func[0] |= PMBUS_HAVE_TEMP2; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) + info->func[0] |= PMBUS_HAVE_TEMP3; /* Sensors detected on all pages */ for (page = 0; page < info->pages; page++) { -- cgit v0.10.2 From 6e4e2f811bade330126d4029c88c831784a7efd9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 1 Jul 2011 17:30:00 -0700 Subject: 6pack,mkiss: fix lock inconsistency Lockdep found a locking inconsistency in the mkiss_close function: > kernel: [ INFO: inconsistent lock state ] > kernel: 2.6.39.1 #3 > kernel: --------------------------------- > kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage. > kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes: > kernel: (disc_data_lock){+++?.-}, at: [] mkiss_close+0x1b/0x90 [mkiss] > kernel: {IN-SOFTIRQ-R} state was registered at: The message hints that disc_data_lock is aquired with softirqs disabled, but does not itself disable softirqs, which can in rare circumstances lead to a deadlock. The same problem is present in the 6pack driver, this patch fixes both by using write_lock_bh instead of write_lock. Reported-by: Bernard F6BVP Tested-by: Bernard F6BVP Signed-off-by: Arnd Bergmann Acked-by: Ralf Baechle Cc: stable@kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 3e5d0b6..0d28378 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -692,10 +692,10 @@ static void sixpack_close(struct tty_struct *tty) { struct sixpack *sp; - write_lock(&disc_data_lock); + write_lock_bh(&disc_data_lock); sp = tty->disc_data; tty->disc_data = NULL; - write_unlock(&disc_data_lock); + write_unlock_bh(&disc_data_lock); if (!sp) return; diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 4c62839..bc02968 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -813,10 +813,10 @@ static void mkiss_close(struct tty_struct *tty) { struct mkiss *ax; - write_lock(&disc_data_lock); + write_lock_bh(&disc_data_lock); ax = tty->disc_data; tty->disc_data = NULL; - write_unlock(&disc_data_lock); + write_unlock_bh(&disc_data_lock); if (!ax) return; -- cgit v0.10.2 From 11d53b4990226247a950e2b1ccfa4cf93bfbc822 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 24 Jun 2011 15:23:34 -0700 Subject: ipv6: Don't change dst->flags using assignments. This blows away any flags already set in the entry. Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index de2b1de..c2af4da 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1062,14 +1062,6 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev, dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255); rt->dst.output = ip6_output; -#if 0 /* there's no chance to use these for ndisc */ - rt->dst.flags = ipv6_addr_type(addr) & IPV6_ADDR_UNICAST - ? DST_HOST - : 0; - ipv6_addr_copy(&rt->rt6i_dst.addr, addr); - rt->rt6i_dst.plen = 128; -#endif - spin_lock_bh(&icmp6_dst_lock); rt->dst.next = icmp6_dst_gc_list; icmp6_dst_gc_list = &rt->dst; @@ -1244,7 +1236,7 @@ int ip6_route_add(struct fib6_config *cfg) ipv6_addr_prefix(&rt->rt6i_dst.addr, &cfg->fc_dst, cfg->fc_dst_len); rt->rt6i_dst.plen = cfg->fc_dst_len; if (rt->rt6i_dst.plen == 128) - rt->dst.flags = DST_HOST; + rt->dst.flags |= DST_HOST; #ifdef CONFIG_IPV6_SUBTREES ipv6_addr_prefix(&rt->rt6i_src.addr, &cfg->fc_src, cfg->fc_src_len); @@ -2025,7 +2017,7 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, in6_dev_hold(idev); - rt->dst.flags = DST_HOST; + rt->dst.flags |= DST_HOST; rt->dst.input = ip6_input; rt->dst.output = ip6_output; rt->rt6i_idev = idev; -- cgit v0.10.2 From 957c665f37007de93ccbe45902a23143724170d0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 24 Jun 2011 15:25:00 -0700 Subject: ipv6: Don't put artificial limit on routing table size. IPV6, unlike IPV4, doesn't have a routing cache. Routing table entries, as well as clones made in response to route lookup requests, all live in the same table. And all of these things are together collected in the destination cache table for ipv6. This means that routing table entries count against the garbage collection limits, even though such entries cannot ever be reclaimed and are added explicitly by the administrator (rather than being created in response to lookups). Therefore it makes no sense to count ipv6 routing table entries against the GC limits. Add a DST_NOCOUNT destination cache entry flag, and skip the counting if it is set. Use this flag bit in ipv6 when adding routing table entries. Signed-off-by: David S. Miller diff --git a/include/net/dst.h b/include/net/dst.h index 7d15d23..e12ddfb 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -77,6 +77,7 @@ struct dst_entry { #define DST_NOPOLICY 0x0004 #define DST_NOHASH 0x0008 #define DST_NOCACHE 0x0010 +#define DST_NOCOUNT 0x0020 union { struct dst_entry *next; struct rtable __rcu *rt_next; diff --git a/net/core/dst.c b/net/core/dst.c index 9ccca03..6135f36 100644 --- a/net/core/dst.c +++ b/net/core/dst.c @@ -190,7 +190,8 @@ void *dst_alloc(struct dst_ops *ops, struct net_device *dev, dst->lastuse = jiffies; dst->flags = flags; dst->next = NULL; - dst_entries_add(ops, 1); + if (!(flags & DST_NOCOUNT)) + dst_entries_add(ops, 1); return dst; } EXPORT_SYMBOL(dst_alloc); @@ -243,7 +244,8 @@ again: neigh_release(neigh); } - dst_entries_add(dst->ops, -1); + if (!(dst->flags & DST_NOCOUNT)) + dst_entries_add(dst->ops, -1); if (dst->ops->destroy) dst->ops->destroy(dst); diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c2af4da..0ef1f08 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -228,9 +228,10 @@ static struct rt6_info ip6_blk_hole_entry_template = { /* allocate dst with ip6_dst_ops */ static inline struct rt6_info *ip6_dst_alloc(struct dst_ops *ops, - struct net_device *dev) + struct net_device *dev, + int flags) { - struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, 0); + struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, flags); memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry)); @@ -1042,7 +1043,7 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev, if (unlikely(idev == NULL)) return NULL; - rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, dev); + rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, dev, 0); if (unlikely(rt == NULL)) { in6_dev_put(idev); goto out; @@ -1206,7 +1207,7 @@ int ip6_route_add(struct fib6_config *cfg) goto out; } - rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, NULL); + rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, NULL, DST_NOCOUNT); if (rt == NULL) { err = -ENOMEM; @@ -1726,7 +1727,7 @@ static struct rt6_info * ip6_rt_copy(struct rt6_info *ort) { struct net *net = dev_net(ort->rt6i_dev); struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, - ort->dst.dev); + ort->dst.dev, 0); if (rt) { rt->dst.input = ort->dst.input; @@ -2005,7 +2006,7 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, { struct net *net = dev_net(idev->dev); struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, - net->loopback_dev); + net->loopback_dev, 0); struct neighbour *neigh; if (rt == NULL) { -- cgit v0.10.2 From 12fdb4d3babcde43834c54dee22a69bb73adbae7 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 29 Jun 2011 23:18:20 +0000 Subject: xfrm: Remove family arg from xfrm_bundle_ok The family arg is not used any more, so remove it. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 9bec2e8..5ce74a3 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -50,7 +50,7 @@ static struct xfrm_policy_afinfo *xfrm_policy_get_afinfo(unsigned short family); static void xfrm_policy_put_afinfo(struct xfrm_policy_afinfo *afinfo); static void xfrm_init_pmtu(struct dst_entry *dst); static int stale_bundle(struct dst_entry *dst); -static int xfrm_bundle_ok(struct xfrm_dst *xdst, int family); +static int xfrm_bundle_ok(struct xfrm_dst *xdst); static struct xfrm_policy *__xfrm_policy_unlink(struct xfrm_policy *pol, @@ -2241,7 +2241,7 @@ static struct dst_entry *xfrm_dst_check(struct dst_entry *dst, u32 cookie) static int stale_bundle(struct dst_entry *dst) { - return !xfrm_bundle_ok((struct xfrm_dst *)dst, AF_UNSPEC); + return !xfrm_bundle_ok((struct xfrm_dst *)dst); } void xfrm_dst_ifdown(struct dst_entry *dst, struct net_device *dev) @@ -2313,7 +2313,7 @@ static void xfrm_init_pmtu(struct dst_entry *dst) * still valid. */ -static int xfrm_bundle_ok(struct xfrm_dst *first, int family) +static int xfrm_bundle_ok(struct xfrm_dst *first) { struct dst_entry *dst = &first->u.dst; struct xfrm_dst *last; -- cgit v0.10.2 From c146066ab80267c3305de5dda6a4083f06df9265 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 29 Jun 2011 23:19:32 +0000 Subject: ipv4: Don't use ufo handling on later transformed packets We might call ip_ufo_append_data() for packets that will be IPsec transformed later. This function should be used just for real udp packets. So we check for rt->dst.header_len which is only nonzero on IPsec handling and call ip_ufo_append_data() just if rt->dst.header_len is zero. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 4a7e16b..84f26e8 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -828,7 +828,7 @@ static int __ip_append_data(struct sock *sk, cork->length += length; if (((length > mtu) || (skb && skb_is_gso(skb))) && (sk->sk_protocol == IPPROTO_UDP) && - (rt->dst.dev->features & NETIF_F_UFO)) { + (rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len) { err = ip_ufo_append_data(sk, queue, getfrag, from, length, hh_len, fragheaderlen, transhdrlen, mtu, flags); -- cgit v0.10.2 From b00897b881f775040653955fda99dcf7c167b382 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 29 Jun 2011 23:20:41 +0000 Subject: xfrm4: Don't call icmp_send on local error Calling icmp_send() on a local message size error leads to an incorrect update of the path mtu. So use ip_local_error() instead to notify the socket about the error. Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c index 2d51840..327a617 100644 --- a/net/ipv4/xfrm4_output.c +++ b/net/ipv4/xfrm4_output.c @@ -32,7 +32,12 @@ static int xfrm4_tunnel_check_size(struct sk_buff *skb) dst = skb_dst(skb); mtu = dst_mtu(dst); if (skb->len > mtu) { - icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); + if (skb->sk) + ip_local_error(skb->sk, EMSGSIZE, ip_hdr(skb)->daddr, + inet_sk(skb->sk)->inet_dport, mtu); + else + icmp_send(skb, ICMP_DEST_UNREACH, + ICMP_FRAG_NEEDED, htonl(mtu)); ret = -EMSGSIZE; } out: -- cgit v0.10.2 From da92b393e0bfc8e6d056885453201b0e7d8190dd Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Thu, 30 Jun 2011 10:02:05 +0000 Subject: qlge:Fix crash caused by mailbox execution on wedged chip. When we are in a recover process from a chip fatal error, driver should skip over execution of mailbox commands during resetting chip. Signed-off-by: Jitendra Kalsaria Signed-off-by: Ron Mercer Signed-off-by: David S. Miller diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index d328507..b2c8612 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -1996,6 +1996,7 @@ enum { QL_LB_LINK_UP = 10, QL_FRC_COREDUMP = 11, QL_EEH_FATAL = 12, + QL_ASIC_RECOVERY = 14, /* We are in ascic recovery. */ }; /* link_status bit definitions */ diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 930ae45..4fbefcf 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -2152,6 +2152,10 @@ void ql_queue_asic_error(struct ql_adapter *qdev) * thread */ clear_bit(QL_ADAPTER_UP, &qdev->flags); + /* Set asic recovery bit to indicate reset process that we are + * in fatal error recovery process rather than normal close + */ + set_bit(QL_ASIC_RECOVERY, &qdev->flags); queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0); } @@ -3818,11 +3822,17 @@ static int ql_adapter_reset(struct ql_adapter *qdev) end_jiffies = jiffies + max((unsigned long)1, usecs_to_jiffies(30)); - /* Stop management traffic. */ - ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); + /* Check if bit is set then skip the mailbox command and + * clear the bit, else we are in normal reset process. + */ + if (!test_bit(QL_ASIC_RECOVERY, &qdev->flags)) { + /* Stop management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); - /* Wait for the NIC and MGMNT FIFOs to empty. */ - ql_wait_fifo_empty(qdev); + /* Wait for the NIC and MGMNT FIFOs to empty. */ + ql_wait_fifo_empty(qdev); + } else + clear_bit(QL_ASIC_RECOVERY, &qdev->flags); ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); -- cgit v0.10.2 From 5069ee555eb41192e7a5003ba3b1f91880cfec06 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Thu, 30 Jun 2011 10:02:06 +0000 Subject: qlge: Fix printk priority so chip fatal errors are always reported. Precedence of the printk should be at higher level so chip fatal errors are always reported. Signed-off-by: Jitendra Kalsaria Signed-off-by: Ron Mercer Signed-off-by: David S. Miller diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 4fbefcf..6b4ff97 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -2170,23 +2170,20 @@ static void ql_process_chip_ae_intr(struct ql_adapter *qdev, return; case CAM_LOOKUP_ERR_EVENT: - netif_err(qdev, link, qdev->ndev, - "Multiple CAM hits lookup occurred.\n"); - netif_err(qdev, drv, qdev->ndev, - "This event shouldn't occur.\n"); + netdev_err(qdev->ndev, "Multiple CAM hits lookup occurred.\n"); + netdev_err(qdev->ndev, "This event shouldn't occur.\n"); ql_queue_asic_error(qdev); return; case SOFT_ECC_ERROR_EVENT: - netif_err(qdev, rx_err, qdev->ndev, - "Soft ECC error detected.\n"); + netdev_err(qdev->ndev, "Soft ECC error detected.\n"); ql_queue_asic_error(qdev); break; case PCI_ERR_ANON_BUF_RD: - netif_err(qdev, rx_err, qdev->ndev, - "PCI error occurred when reading anonymous buffers from rx_ring %d.\n", - ib_ae_rsp->q_id); + netdev_err(qdev->ndev, "PCI error occurred when reading " + "anonymous buffers from rx_ring %d.\n", + ib_ae_rsp->q_id); ql_queue_asic_error(qdev); break; @@ -2441,11 +2438,10 @@ static irqreturn_t qlge_isr(int irq, void *dev_id) */ if (var & STS_FE) { ql_queue_asic_error(qdev); - netif_err(qdev, intr, qdev->ndev, - "Got fatal error, STS = %x.\n", var); + netdev_err(qdev->ndev, "Got fatal error, STS = %x.\n", var); var = ql_read32(qdev, ERR_STS); - netif_err(qdev, intr, qdev->ndev, - "Resetting chip. Error Status Register = 0x%x\n", var); + netdev_err(qdev->ndev, "Resetting chip. " + "Error Status Register = 0x%x\n", var); return IRQ_HANDLED; } -- cgit v0.10.2 From b4e4fe848c25af645a069bb2f21ba6456246e5de Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Thu, 30 Jun 2011 10:02:07 +0000 Subject: qlge:Version change to v1.00.00.29 Signed-off-by: Jitendra Kalsaria Signed-off-by: Ron Mercer Signed-off-by: David S. Miller diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index b2c8612..ca306fd 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -16,7 +16,7 @@ */ #define DRV_NAME "qlge" #define DRV_STRING "QLogic 10 Gigabit PCI-E Ethernet Driver " -#define DRV_VERSION "v1.00.00.27.00.00-01" +#define DRV_VERSION "v1.00.00.29.00.00-01" #define WQ_ADDR_ALIGN 0x3 /* 4 byte alignment */ -- cgit v0.10.2 From 5f77898de17ff983ff0e2988b73a6bdf4b6f9f8b Mon Sep 17 00:00:00 2001 From: Shyam Iyer Date: Tue, 28 Jun 2011 08:58:05 +0000 Subject: Fix call trace when interrupts are disabled while sleeping function kzalloc is called request_threaded irq will call kzalloc that can sleep. Initializing the flags variable outside of spin_lock_irqsave/restore in bnad_mbox_irq_alloc will avoid call traces like below. Jun 27 08:15:24 home-t710 kernel: [11735.634550] Brocade 10G Ethernet driver Jun 27 08:15:24 home-t710 kernel: [11735.634590] bnad_pci_probe : (0xffff880427f3d000, 0xffffffffa020f3e0) PCI Func : (2) Jun 27 08:15:24 home-t710 kernel: [11735.637677] bna 0000:82:00.2: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.638290] bar0 mapped to ffffc90014980000, len 262144 Jun 27 08:15:24 home-t710 kernel: [11735.638732] BUG: sleeping function called from invalid context at mm/slub.c:847 Jun 27 08:15:24 home-t710 kernel: [11735.638736] in_atomic(): 0, irqs_disabled(): 1, pid: 11243, name: insmod Jun 27 08:15:24 home-t710 kernel: [11735.638740] Pid: 11243, comm: insmod Not tainted 3.0.0-rc4+ #6 Jun 27 08:15:24 home-t710 kernel: [11735.638743] Call Trace: Jun 27 08:15:24 home-t710 kernel: [11735.638755] [] __might_sleep+0xeb/0xf0 Jun 27 08:15:24 home-t710 kernel: [11735.638766] [] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638773] [] kmem_cache_alloc_trace+0x43/0xd8 Jun 27 08:15:24 home-t710 kernel: [11735.638782] [] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638787] [] request_threaded_irq+0xa1/0x113 Jun 27 08:15:24 home-t710 kernel: [11735.638798] [] bnad_pci_probe+0x612/0x8e5 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638807] [] ? netif_wake_queue+0x3d/0x3d [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638816] [] ? _raw_spin_unlock_irqrestore+0x17/0x19 Jun 27 08:15:24 home-t710 kernel: [11735.638822] [] local_pci_probe+0x44/0x75 Jun 27 08:15:24 home-t710 kernel: [11735.638826] [] pci_device_probe+0xd0/0xff Jun 27 08:15:24 home-t710 kernel: [11735.638832] [] driver_probe_device+0x131/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638836] [] __driver_attach+0x5a/0x7e Jun 27 08:15:24 home-t710 kernel: [11735.638840] [] ? driver_probe_device+0x213/0x213 Jun 27 08:15:24 home-t710 kernel: [11735.638844] [] bus_for_each_dev+0x53/0x89 Jun 27 08:15:24 home-t710 kernel: [11735.638848] [] driver_attach+0x1e/0x20 Jun 27 08:15:24 home-t710 kernel: [11735.638852] [] bus_add_driver+0xd1/0x224 Jun 27 08:15:24 home-t710 kernel: [11735.638858] [] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638862] [] driver_register+0x98/0x105 Jun 27 08:15:24 home-t710 kernel: [11735.638866] [] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638871] [] __pci_register_driver+0x56/0xc1 Jun 27 08:15:24 home-t710 kernel: [11735.638875] [] ? 0xffffffffa01b7fff Jun 27 08:15:24 home-t710 kernel: [11735.638884] [] bnad_module_init+0x40/0x60 [bna] Jun 27 08:15:24 home-t710 kernel: [11735.638892] [] do_one_initcall+0x7f/0x136 Jun 27 08:15:24 home-t710 kernel: [11735.638899] [] sys_init_module+0x88/0x1d0 Jun 27 08:15:24 home-t710 kernel: [11735.638906] [] system_call_fastpath+0x16/0x1b Jun 27 08:15:24 home-t710 kernel: [11735.639642] bnad_pci_probe : (0xffff880427f3e000, 0xffffffffa020f3e0) PCI Func : (3) Jun 27 08:15:24 home-t710 kernel: [11735.639665] bna 0000:82:00.3: PCI INT A -> GSI 66 (level, low) -> IRQ 66 Jun 27 08:15:24 home-t710 kernel: [11735.639735] bar0 mapped to ffffc90014400000, len 262144 Signed-off-by: Shyam Iyer Acked-by: Rasesh Mody Signed-off-by: David S. Miller diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c index 7d25a97..44e219c 100644 --- a/drivers/net/bna/bnad.c +++ b/drivers/net/bna/bnad.c @@ -1111,7 +1111,7 @@ bnad_mbox_irq_alloc(struct bnad *bnad, struct bna_intr_info *intr_info) { int err = 0; - unsigned long flags; + unsigned long irq_flags = 0, flags; u32 irq; irq_handler_t irq_handler; @@ -1125,18 +1125,17 @@ bnad_mbox_irq_alloc(struct bnad *bnad, if (bnad->cfg_flags & BNAD_CF_MSIX) { irq_handler = (irq_handler_t)bnad_msix_mbox_handler; irq = bnad->msix_table[bnad->msix_num - 1].vector; - flags = 0; intr_info->intr_type = BNA_INTR_T_MSIX; intr_info->idl[0].vector = bnad->msix_num - 1; } else { irq_handler = (irq_handler_t)bnad_isr; irq = bnad->pcidev->irq; - flags = IRQF_SHARED; + irq_flags = IRQF_SHARED; intr_info->intr_type = BNA_INTR_T_INTX; /* intr_info->idl.vector = 0 ? */ } spin_unlock_irqrestore(&bnad->bna_lock, flags); - + flags = irq_flags; sprintf(bnad->mbox_irq_name, "%s", BNAD_NAME); /* -- cgit v0.10.2 From 29cb3cd208dd0e4471bb80bec4facc49ceb199fa Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Jul 2011 09:54:01 +0100 Subject: ARM: pm: allow suspend finisher to return error codes There are SoCs where attempting to enter a low power state is ignored, and the CPU continues executing instructions with all state preserved. It is over-complex at that point to disable the MMU just to call the resume path. Instead, allow the suspend finisher to return error codes to abort suspend in this circumstance, where the cpu_suspend internals will then unwind the saved state on the stack. Also omit the tlb flush as no changes to the page tables will have happened. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h index f8db9d0..b0e4e1a 100644 --- a/arch/arm/include/asm/suspend.h +++ b/arch/arm/include/asm/suspend.h @@ -10,12 +10,13 @@ extern void cpu_resume(void); * Hide the first two arguments to __cpu_suspend - these are an implementation * detail which platform code shouldn't have to know about. */ -static inline void cpu_suspend(unsigned long arg, void (*fn)(unsigned long)) +static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) { - extern void __cpu_suspend(int, long, unsigned long, - void (*)(unsigned long)); - __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn); + extern int __cpu_suspend(int, long, unsigned long, + int (*)(unsigned long)); + int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn); flush_tlb_all(); + return ret; } #endif diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index c156d0e..dc902f2 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -12,7 +12,6 @@ * r1 = v:p offset * r2 = suspend function arg0 * r3 = suspend function - * Note: does not return until system resumes */ ENTRY(__cpu_suspend) stmfd sp!, {r4 - r11, lr} @@ -26,7 +25,7 @@ ENTRY(__cpu_suspend) #endif mov r6, sp @ current virtual SP sub sp, sp, r5 @ allocate CPU state on stack - mov r0, sp @ save pointer + mov r0, sp @ save pointer to CPU save block add ip, ip, r1 @ convert resume fn to phys stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn ldr r5, =sleep_save_sp @@ -55,10 +54,17 @@ ENTRY(__cpu_suspend) #else bl __cpuc_flush_kern_all #endif + adr lr, BSYM(cpu_suspend_abort) ldmfd sp!, {r0, pc} @ call suspend fn ENDPROC(__cpu_suspend) .ltorg +cpu_suspend_abort: + ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn + mov sp, r2 + ldmfd sp!, {r4 - r11, pc} +ENDPROC(cpu_suspend_abort) + /* * r0 = control register value * r1 = v:p offset (preserved by cpu_do_resume) @@ -89,6 +95,7 @@ cpu_resume_after_mmu: str r5, [r2, r4, lsl #2] @ restore old mapping mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache bl cpu_init @ restore the und/abt/irq banked regs + mov r0, #0 @ return zero on success ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 5c01c60..533c28f 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -280,7 +280,7 @@ static struct sleep_save exynos4_l2cc_save[] = { SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), }; -void exynos4_cpu_suspend(unsigned long arg) +static int exynos4_cpu_suspend(unsigned long arg) { unsigned long tmp; unsigned long mask = 0xFFFFFFFF; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7238a63..b77d826 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -321,9 +321,10 @@ static void omap34xx_save_context(u32 *save) *save++ = val; } -static void omap34xx_do_sram_idle(unsigned long save_state) +static int omap34xx_do_sram_idle(unsigned long save_state) { omap34xx_cpu_suspend(save_state); + return 0; } void omap_sram_idle(void) diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index a566720..51558bc 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns { extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; /* sleep.S */ -extern void pxa25x_finish_suspend(unsigned long); -extern void pxa27x_finish_suspend(unsigned long); +extern int pxa25x_finish_suspend(unsigned long); +extern int pxa27x_finish_suspend(unsigned long); extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 9fe947b..ef1c56a 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -148,7 +148,7 @@ static void pxa3xx_cpu_pm_suspend(void) asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); #endif - extern void pxa3xx_finish_suspend(unsigned long); + extern int pxa3xx_finish_suspend(unsigned long); /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 9a1fb89..f4077ef 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -37,7 +37,7 @@ extern void s3c2412_sleep_enter(void); -static void s3c2412_cpu_suspend(unsigned long arg) +static int s3c2412_cpu_suspend(unsigned long arg) { unsigned long tmp; @@ -48,6 +48,8 @@ static void s3c2412_cpu_suspend(unsigned long arg) __raw_writel(tmp, S3C2412_PWRCFG); s3c2412_sleep_enter(); + + panic("sleep resumed to originator?"); } static void s3c2412_pm_prepare(void) diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 9e67a2a..9ec54f1 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -24,7 +24,7 @@ extern void s3c2412_sleep_enter(void); -static void s3c2416_cpu_suspend(unsigned long arg) +static int s3c2416_cpu_suspend(unsigned long arg) { /* enable wakeup sources regardless of battery state */ __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG); @@ -33,6 +33,8 @@ static void s3c2416_cpu_suspend(unsigned long arg) __raw_writel(0x2BED, S3C2443_PWRMODE); s3c2412_sleep_enter(); + + panic("sleep resumed to originator?"); } static void s3c2416_pm_prepare(void) diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 7cc1879..8bad643 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -112,7 +112,7 @@ void s3c_pm_save_core(void) * this. */ -static void s3c64xx_cpu_suspend(unsigned long arg) +static int s3c64xx_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index cf9a1e9..bf85b8b 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -33,7 +33,7 @@ #include #include -extern void sa1100_finish_suspend(unsigned long); +extern int sa1100_finish_suspend(unsigned long); #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 0a5b7fa..f674991 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -42,7 +42,7 @@ extern unsigned long s3c_irqwake_eintallow; /* per-cpu sleep functions */ extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(unsigned long); +extern int (*pm_cpu_sleep)(unsigned long); /* Flags for PM Control */ @@ -54,7 +54,7 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ extern void s3c_cpu_resume(void); -extern void s3c2410_cpu_suspend(unsigned long); +extern int s3c2410_cpu_suspend(unsigned long); /* sleep save info */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 69d6b04..5fa1742 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -232,7 +232,7 @@ static void __maybe_unused s3c_pm_show_resume_irqs(int start, void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(unsigned long); +int (*pm_cpu_sleep)(unsigned long); #define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) -- cgit v0.10.2 From 02fe2845d6a837ab02f0738f6cf4591a02cc88d4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 11:44:06 +0100 Subject: ARM: entry: avoid enabling interrupts in prefetch/data abort handlers Avoid enabling interrupts if the parent context had interrupts enabled in the abort handler assembly code, and move this into the breakpoint/ page/alignment fault handlers instead. This gets rid of some special-casing for the breakpoint fault handlers from the low level abort handler path. Acked-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d644d02..c46bafa 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -185,20 +185,15 @@ ENDPROC(__und_invalid) __dabt_svc: svc_entry - @ - @ get ready to re-enable interrupts if appropriate - @ - mrs r9, cpsr - tst r5, #PSR_I_BIT - biceq r9, r9, #PSR_I_BIT +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif dabt_helper @ - @ set desired IRQ state, then call main handler + @ call main handler @ - debug_entry r1 - msr cpsr_c, r9 mov r2, sp bl do_DataAbort @@ -211,6 +206,12 @@ __dabt_svc: @ restore SPSR and restart the instruction @ ldr r5, [sp, #S_PSR] +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__dabt_svc) @@ -307,16 +308,11 @@ ENDPROC(__und_svc) __pabt_svc: svc_entry - @ - @ re-enable interrupts if appropriate - @ - mrs r9, cpsr - tst r5, #PSR_I_BIT - biceq r9, r9, #PSR_I_BIT +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif pabt_helper - debug_entry r1 - msr cpsr_c, r9 @ Maybe enable interrupts mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler @@ -329,6 +325,12 @@ __pabt_svc: @ restore SPSR and restart the instruction @ ldr r5, [sp, #S_PSR] +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__pabt_svc) @@ -412,11 +414,6 @@ __dabt_usr: kuser_cmpxchg_check dabt_helper - @ - @ IRQs on, then call the main handler - @ - debug_entry r1 - enable_irq mov r2, sp adr lr, BSYM(ret_from_exception) b do_DataAbort @@ -663,8 +660,6 @@ ENDPROC(__und_usr_unknown) __pabt_usr: usr_entry pabt_helper - debug_entry r1 - enable_irq @ Enable interrupts mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler UNWIND(.fnend ) diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 051166c..4d6ad83 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -165,25 +165,6 @@ .endm #endif /* !CONFIG_THUMB2_KERNEL */ - @ - @ Debug exceptions are taken as prefetch or data aborts. - @ We must disable preemption during the handler so that - @ we can access the debug registers safely. - @ - .macro debug_entry, fsr -#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT) - ldr r4, =0x40f @ mask out fsr.fs - and r5, r4, \fsr - cmp r5, #2 @ debug exception - bne 1f - get_thread_info r10 - ldr r6, [r10, #TI_PREEMPT] @ get preempt count - add r11, r6, #1 @ increment it - str r11, [r10, #TI_PREEMPT] -1: -#endif - .endm - /* * These are the registers used in the syscall handler, and allow us to * have in theory up to 7 arguments to a function - r0 to r6. diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 87acc25..a927ca1 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -796,7 +796,7 @@ unlock: /* * Called from either the Data Abort Handler [watchpoint] or the - * Prefetch Abort Handler [breakpoint] with preemption disabled. + * Prefetch Abort Handler [breakpoint] with interrupts disabled. */ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -804,8 +804,10 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, int ret = 0; u32 dscr; - /* We must be called with preemption disabled. */ - WARN_ON(preemptible()); + preempt_disable(); + + if (interrupts_enabled(regs)) + local_irq_enable(); /* We only handle watchpoints and hardware breakpoints. */ ARM_DBG_READ(c1, 0, dscr); @@ -824,10 +826,6 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, ret = 1; /* Unhandled fault. */ } - /* - * Re-enable preemption after it was disabled in the - * low-level exception handling code. - */ preempt_enable(); return ret; diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 724ba3b..be7c638 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -727,6 +727,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) int isize = 4; int thumb2_32b = 0; + if (interrupts_enabled(regs)) + local_irq_enable(); + instrptr = instruction_pointer(regs); fs = get_fs(); diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index bc0e1d8..20e5d51 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -285,6 +285,10 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) tsk = current; mm = tsk->mm; + /* Enable interrupts if they were enabled in the parent context. */ + if (interrupts_enabled(regs)) + local_irq_enable(); + /* * If we're in an interrupt or have no user * context, we must not take the fault.. -- cgit v0.10.2 From df295df6c391e322a06dea0d2bc3d22debd15fb9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 16:55:58 +0100 Subject: ARM: entry: instrument svc undefined exception handler with irqtrace Add irqtrace function calls to the undefined exception handler, so that we get sane lockdep traces from locking problems in undefined exception handlers. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index c46bafa..920dd3d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -268,6 +268,10 @@ __und_svc: svc_entry #endif +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif + @ @ call emulation code, which returns using r9 if it has emulated @ the instruction, or the more conventional lr if we are to treat @@ -300,6 +304,12 @@ __und_svc: @ restore SPSR and restart the instruction @ ldr r5, [sp, #S_PSR] @ Get SVC cpsr +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__und_svc) -- cgit v0.10.2 From bc089602d206b2abc2d2e8e5324d90342cc0447b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 18:28:19 +0100 Subject: ARM: entry: instrument usr exception handlers with irqsoff tracing As we no longer re-enable interrupts in these exception handlers, add the irqsoff tracing calls to them so that the kernel tracks the state more accurately. Note that these calls are conditional on IRQSOFF_TRACER: kernel ----------> user ---------> kernel ^ irqs enabled ^ irqs disabled No kernel code can run on the local CPU until we've re-entered the kernel through one of the exception handlers - and userspace can not take any locks etc. So, the kernel doesn't care about the IRQ mask state while userspace is running unless we're doing IRQ off latency tracing. So, we can (and do) avoid the overhead of updating the IRQ mask state on every kernel->user and user->kernel transition. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 920dd3d..f863ee7 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -421,6 +421,11 @@ ENDPROC(__pabt_svc) .align 5 __dabt_usr: usr_entry + +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif + kuser_cmpxchg_check dabt_helper @@ -433,12 +438,12 @@ ENDPROC(__dabt_usr) .align 5 __irq_usr: usr_entry - kuser_cmpxchg_check #ifdef CONFIG_IRQSOFF_TRACER bl trace_hardirqs_off #endif + kuser_cmpxchg_check irq_handler get_thread_info tsk mov why, #0 @@ -451,6 +456,11 @@ ENDPROC(__irq_usr) .align 5 __und_usr: usr_entry + +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif + mov r2, r4 mov r3, r5 @@ -669,6 +679,11 @@ ENDPROC(__und_usr_unknown) .align 5 __pabt_usr: usr_entry + +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif + pabt_helper mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler -- cgit v0.10.2 From f2741b78b607576f0c256604cb3d9256b3428a32 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Jun 2011 17:35:19 +0100 Subject: ARM: entry: consolidate trace_hardirqs_off into (svc|usr)_entry macros All handlers now call trace_hardirqs_off, so move this common code into the (svc|usr)_entry assembler macros. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index f863ee7..a5b2c40 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -179,16 +179,15 @@ ENDPROC(__und_invalid) @ r6 - orig_r0 (see pt_regs definition in ptrace.h) @ stmia r7, {r2 - r6} - .endm - - .align 5 -__dabt_svc: - svc_entry #ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif + .endm + .align 5 +__dabt_svc: + svc_entry dabt_helper @ @@ -219,11 +218,6 @@ ENDPROC(__dabt_svc) .align 5 __irq_svc: svc_entry - -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif - irq_handler #ifdef CONFIG_PREEMPT @@ -267,11 +261,6 @@ __und_svc: #else svc_entry #endif - -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif - @ @ call emulation code, which returns using r9 if it has emulated @ the instruction, or the more conventional lr if we are to treat @@ -317,11 +306,6 @@ ENDPROC(__und_svc) .align 5 __pabt_svc: svc_entry - -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif - pabt_helper mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler @@ -401,6 +385,10 @@ ENDPROC(__pabt_svc) @ Clear FP to mark the first stack frame @ zero_fp + +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif .endm .macro kuser_cmpxchg_check @@ -421,11 +409,6 @@ ENDPROC(__pabt_svc) .align 5 __dabt_usr: usr_entry - -#ifdef CONFIG_IRQSOFF_TRACER - bl trace_hardirqs_off -#endif - kuser_cmpxchg_check dabt_helper @@ -438,11 +421,6 @@ ENDPROC(__dabt_usr) .align 5 __irq_usr: usr_entry - -#ifdef CONFIG_IRQSOFF_TRACER - bl trace_hardirqs_off -#endif - kuser_cmpxchg_check irq_handler get_thread_info tsk @@ -457,10 +435,6 @@ ENDPROC(__irq_usr) __und_usr: usr_entry -#ifdef CONFIG_IRQSOFF_TRACER - bl trace_hardirqs_off -#endif - mov r2, r4 mov r3, r5 @@ -679,11 +653,6 @@ ENDPROC(__und_usr_unknown) .align 5 __pabt_usr: usr_entry - -#ifdef CONFIG_IRQSOFF_TRACER - bl trace_hardirqs_off -#endif - pabt_helper mov r2, sp @ regs bl do_PrefetchAbort @ call abort handler -- cgit v0.10.2 From d9600c99c549732a501cb727157800623a06175d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 10:34:02 +0100 Subject: ARM: entry: re-allocate registers in irq entry assembly macros This avoids the irq entry assembly corrupting r5, thereby allowing it to be preserved through to the svc exit code. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index 2da8547..2f1e209 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -4,8 +4,8 @@ * Interrupt handling. Preserves r7, r8, r9 */ .macro arch_irq_handler_default - get_irqnr_preamble r5, lr -1: get_irqnr_and_base r0, r6, r5, lr + get_irqnr_preamble r6, lr +1: get_irqnr_and_base r0, r2, r6, lr movne r1, sp @ @ routine called with r0 = irq number, r1 = struct pt_regs * @@ -17,17 +17,17 @@ /* * XXX * - * this macro assumes that irqstat (r6) and base (r5) are + * this macro assumes that irqstat (r2) and base (r6) are * preserved from get_irqnr_and_base above */ - ALT_SMP(test_for_ipi r0, r6, r5, lr) + ALT_SMP(test_for_ipi r0, r2, r6, lr) ALT_UP_B(9997f) movne r1, sp adrne lr, BSYM(1b) bne do_IPI #ifdef CONFIG_LOCAL_TIMERS - test_for_ltirq r0, r6, r5, lr + test_for_ltirq r0, r2, r6, lr movne r0, sp adrne lr, BSYM(1b) bne do_local_timer @@ -40,7 +40,7 @@ .align 5 .global \symbol_name \symbol_name: - mov r4, lr + mov r8, lr arch_irq_handler_default - mov pc, r4 + mov pc, r8 .endm diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a5b2c40..b17e579 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -29,16 +29,16 @@ #include /* - * Interrupt handling. Preserves r7, r8, r9 + * Interrupt handling. */ .macro irq_handler #ifdef CONFIG_MULTI_IRQ_HANDLER - ldr r5, =handle_arch_irq + ldr r1, =handle_arch_irq mov r0, sp - ldr r5, [r5] + ldr r1, [r1] adr lr, BSYM(9997f) - teq r5, #0 - movne pc, r5 + teq r1, #0 + movne pc, r1 #endif arch_irq_handler_default 9997: -- cgit v0.10.2 From 8dfe7ac96fedd4f5219879f63a8a546a33609daf Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 12:37:35 +0100 Subject: ARM: entry: prefetch abort: tail-call the main prefetch abort handler Tail-call the main C prefetch abort handler code from the per-CPU helper code. Also note that the helper function becomes ABI compliant in terms of the registers preserved. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index b17e579..af2fba7 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -45,7 +45,7 @@ .endm .macro pabt_helper - @ PABORT handler takes fault address in r4 + @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5 #ifdef MULTI_PABORT ldr ip, .LCprocfns mov lr, pc @@ -306,9 +306,8 @@ ENDPROC(__und_svc) .align 5 __pabt_svc: svc_entry - pabt_helper mov r2, sp @ regs - bl do_PrefetchAbort @ call abort handler + pabt_helper @ @ IRQs off again before pulling preserved data off the stack @@ -653,9 +652,8 @@ ENDPROC(__und_usr_unknown) .align 5 __pabt_usr: usr_entry - pabt_helper mov r2, sp @ regs - bl do_PrefetchAbort @ call abort handler + pabt_helper UNWIND(.fnend ) /* fall through */ /* diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S index 8a5d8aa..8bbff02 100644 --- a/arch/arm/mm/pabort-legacy.S +++ b/arch/arm/mm/pabort-legacy.S @@ -4,10 +4,11 @@ /* * Function: legacy_pabort * - * Params : r4 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = Simulated IFSR with section translation fault status + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ @@ -16,5 +17,5 @@ ENTRY(legacy_pabort) mov r0, r4 mov r1, #5 - mov pc, lr + b do_PrefetchAbort ENDPROC(legacy_pabort) diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S index eaac1cb..9627646 100644 --- a/arch/arm/mm/pabort-v6.S +++ b/arch/arm/mm/pabort-v6.S @@ -4,10 +4,11 @@ /* * Function: v6_pabort * - * Params : r4 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = IFSR + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ @@ -16,5 +17,5 @@ ENTRY(v6_pabort) mov r0, r4 mrc p15, 0, r1, c5, c0, 1 @ get IFSR - mov pc, lr + b do_PrefetchAbort ENDPROC(v6_pabort) diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S index b515e0b..875761f 100644 --- a/arch/arm/mm/pabort-v7.S +++ b/arch/arm/mm/pabort-v7.S @@ -2,12 +2,13 @@ #include /* - * Function: v6_pabort + * Function: v7_pabort * - * Params : r4 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = IFSR + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ @@ -16,5 +17,5 @@ ENTRY(v7_pabort) mrc p15, 0, r0, c6, c0, 2 @ get IFAR mrc p15, 0, r1, c5, c0, 1 @ get IFSR - mov pc, lr + b do_PrefetchAbort ENDPROC(v7_pabort) -- cgit v0.10.2 From 3e287bec6fde088bff05ee7f998f53e8ac75b922 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 14:35:07 +0100 Subject: ARM: entry: data abort: arrange for CPU abort helpers to take pc/psr in r4/r5 Re-jig the CPU abort helpers to take the PC/PSR in r4/r5 rather than r2/r3. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index af2fba7..85298c0 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -56,14 +56,12 @@ .endm .macro dabt_helper - mov r2, r4 - mov r3, r5 @ @ Call the processor-specific abort handler: @ - @ r2 - aborted context pc - @ r3 - aborted context cpsr + @ r4 - aborted context pc + @ r5 - aborted context psr @ @ The abort handler must return the aborted address in r0, and @ the fault status register in r1. r9 must be preserved. diff --git a/arch/arm/mm/abort-ev4.S b/arch/arm/mm/abort-ev4.S index 4f18f9e..beb112b 100644 --- a/arch/arm/mm/abort-ev4.S +++ b/arch/arm/mm/abort-ev4.S @@ -3,8 +3,8 @@ /* * Function: v4_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Returns : r0 = address of abort * : r1 = FSR, bit 11 = write @@ -21,10 +21,8 @@ ENTRY(v4_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r3, [r2] @ read aborted ARM instruction + ldr r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. mov pc, lr - - diff --git a/arch/arm/mm/abort-ev4t.S b/arch/arm/mm/abort-ev4t.S index 9910123..eaa4ac0 100644 --- a/arch/arm/mm/abort-ev4t.S +++ b/arch/arm/mm/abort-ev4t.S @@ -4,8 +4,8 @@ /* * Function: v4t_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Returns : r0 = address of abort * : r1 = FSR, bit 11 = write @@ -22,8 +22,8 @@ ENTRY(v4t_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - do_thumb_abort fsr=r1, pc=r2, psr=r3, tmp=r3 - ldreq r3, [r2] @ read aborted ARM instruction + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S index 800e8d4..97eee7c 100644 --- a/arch/arm/mm/abort-ev5t.S +++ b/arch/arm/mm/abort-ev5t.S @@ -4,8 +4,8 @@ /* * Function: v5t_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Returns : r0 = address of abort * : r1 = FSR, bit 11 = write @@ -22,8 +22,8 @@ ENTRY(v5t_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - do_thumb_abort fsr=r1, pc=r2, psr=r3, tmp=r3 - ldreq r3, [r2] @ read aborted ARM instruction + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 @ clear bits 11 of FSR do_ldrd_abort tmp=r2, insn=r3 tst r3, #1 << 20 @ check write diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S index bcb58d2..9a365cf 100644 --- a/arch/arm/mm/abort-ev5tj.S +++ b/arch/arm/mm/abort-ev5tj.S @@ -4,8 +4,8 @@ /* * Function: v5tj_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Returns : r0 = address of abort * : r1 = FSR, bit 11 = write @@ -23,13 +23,11 @@ ENTRY(v5tj_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR - tst r3, #PSR_J_BIT @ Java? + tst r5, #PSR_J_BIT @ Java? movne pc, lr - do_thumb_abort fsr=r1, pc=r2, psr=r3, tmp=r3 - ldreq r3, [r2] @ read aborted ARM instruction + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction do_ldrd_abort tmp=r2, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. mov pc, lr - - diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index ef526e7..52db4a3 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -4,8 +4,8 @@ /* * Function: v6_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Returns : r0 = address of abort * : r1 = FSR, bit 11 = write @@ -33,10 +33,10 @@ ENTRY(v6_early_abort) * The test below covers all the write situations, including Java bytecodes */ bic r1, r1, #1 << 11 @ clear bit 11 of FSR - tst r3, #PSR_J_BIT @ Java? + tst r5, #PSR_J_BIT @ Java? movne pc, lr - do_thumb_abort fsr=r1, pc=r2, psr=r3, tmp=r3 - ldreq r3, [r2] @ read aborted ARM instruction + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 reveq r3, r3 #endif @@ -44,5 +44,3 @@ ENTRY(v6_early_abort) tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. mov pc, lr - - diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index ec88b15..6cb5143 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -3,8 +3,8 @@ /* * Function: v7_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Returns : r0 = address of abort * : r1 = FSR, bit 11 = write diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index 9fb7b0e..fea7514 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -3,8 +3,8 @@ /* * Function: v4t_late_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Returns : r0 = address of abort * : r1 = FSR, bit 11 = write @@ -18,7 +18,7 @@ * picture. Unfortunately, this does happen. We live with it. */ ENTRY(v4t_late_abort) - tst r3, #PSR_T_BIT @ check for thumb mode + tst r5, #PSR_T_BIT @ check for thumb mode #ifdef CONFIG_CPU_CP15_MMU mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR @@ -28,7 +28,7 @@ ENTRY(v4t_late_abort) mov r1, #0 #endif bne .data_thumb_abort - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 @@ -52,7 +52,7 @@ ENTRY(v4t_late_abort) /* e */ b .data_unknown /* f */ .data_unknown: @ Part of jumptable - mov r0, r2 + mov r0, r4 mov r1, r8 mov r2, sp bl baddataabort @@ -159,7 +159,7 @@ ENTRY(v4t_late_abort) b .data_unknown @ F: MUL? .data_thumb_abort: - ldrh r8, [r2] @ read instruction + ldrh r8, [r4] @ read instruction tst r8, #1 << 11 @ L = 1 -> write? orreq r1, r1, #1 << 8 @ yes and r7, r8, #15 << 12 diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S index 625e580..9eaef6f 100644 --- a/arch/arm/mm/abort-nommu.S +++ b/arch/arm/mm/abort-nommu.S @@ -3,8 +3,8 @@ /* * Function: nommu_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Returns : r0 = 0 (abort address) * : r1 = 0 (FSR) diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 5f79dc4..e7be700 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -29,8 +29,8 @@ ENTRY(cpu_arm7_dcache_clean_area) /* * Function: arm6_7_data_abort () * - * Params : r2 = address of aborted instruction - * : sp = pointer to registers + * Params : r4 = aborted context pc + * : r5 = aborted context psr * * Purpose : obtain information about current aborted instruction * @@ -41,7 +41,7 @@ ENTRY(cpu_arm7_dcache_clean_area) ENTRY(cpu_arm7_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 0 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 @@ -65,7 +65,7 @@ ENTRY(cpu_arm7_data_abort) /* e */ b .data_unknown /* f */ .data_unknown: @ Part of jumptable - mov r0, r2 + mov r0, r4 mov r1, r8 mov r2, sp bl baddataabort @@ -74,7 +74,7 @@ ENTRY(cpu_arm7_data_abort) ENTRY(cpu_arm6_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 0 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #14 << 24 -- cgit v0.10.2 From 0d147db0c127c561f8f9ead9f3c1ec38f89f1040 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 14:42:02 +0100 Subject: ARM: entry: data abort: avoid using r2 in abort helpers This allows us to pass the pt_regs pointer in to these functions ready for tail-calling the abort handler. Signed-off-by: Russell King diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S index 97eee7c..751391a 100644 --- a/arch/arm/mm/abort-ev5t.S +++ b/arch/arm/mm/abort-ev5t.S @@ -25,7 +25,7 @@ ENTRY(v5t_early_abort) do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 ldreq r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 @ clear bits 11 of FSR - do_ldrd_abort tmp=r2, insn=r3 + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 mov pc, lr diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S index 9a365cf..ccfbc93 100644 --- a/arch/arm/mm/abort-ev5tj.S +++ b/arch/arm/mm/abort-ev5tj.S @@ -27,7 +27,7 @@ ENTRY(v5tj_early_abort) movne pc, lr do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 ldreq r3, [r4] @ read aborted ARM instruction - do_ldrd_abort tmp=r2, insn=r3 + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. mov pc, lr diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 52db4a3..b64d886 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -40,7 +40,7 @@ ENTRY(v6_early_abort) #ifdef CONFIG_CPU_ENDIAN_BE8 reveq r3, r3 #endif - do_ldrd_abort tmp=r2, insn=r3 + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. mov pc, lr diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index 6cb5143..6f98b3a 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -41,13 +41,13 @@ ENTRY(v7_early_abort) mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR isb - mrc p15, 0, r2, c7, c4, 0 @ Read the PAR - and r3, r2, #0x7b @ On translation fault + mrc p15, 0, ip, c7, c4, 0 @ Read the PAR + and r3, ip, #0x7b @ On translation fault cmp r3, #0x0b movne pc, lr bic r1, r1, #0xf @ Fix up FSR FS[5:0] - and r2, r2, #0x7e - orr r1, r1, r2, LSR #1 + and ip, ip, #0x7e + orr r1, r1, ip, LSR #1 #endif mov pc, lr diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index fea7514..d032b1f 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -64,12 +64,12 @@ ENTRY(v4t_late_abort) mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 - and r2, r8, r7, lsl #1 - add r6, r6, r2, lsr #1 - and r2, r8, r7, lsl #2 - add r6, r6, r2, lsr #2 - and r2, r8, r7, lsl #3 - add r6, r6, r2, lsr #3 + and r9, r8, r7, lsl #1 + add r6, r6, r9, lsr #1 + and r9, r8, r7, lsl #2 + add r6, r6, r9, lsr #2 + and r9, r8, r7, lsl #3 + add r6, r6, r9, lsr #3 add r6, r6, r6, lsr #8 add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. @@ -103,13 +103,13 @@ ENTRY(v4t_late_abort) tst r8, #1 << 21 @ check writeback bit moveq pc, lr @ no writeback -> no fixup .data_arm_lateldrpostconst: - movs r2, r8, lsl #20 @ Get offset + movs r9, r8, lsl #20 @ Get offset moveq pc, lr @ zero -> no fixup and r5, r8, #15 << 16 @ Extract 'n' from instruction ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit - subne r7, r7, r2, lsr #20 @ Undo increment - addeq r7, r7, r2, lsr #20 @ Undo decrement + subne r7, r7, r9, lsr #20 @ Undo increment + addeq r7, r7, r9, lsr #20 @ Undo decrement str r7, [sp, r5, lsr #14] @ Put register 'Rn' mov pc, lr @@ -194,11 +194,11 @@ ENTRY(v4t_late_abort) tst r8, #1 << 10 beq .data_unknown and r6, r8, #0x55 @ hweight8(r8) + R bit - and r2, r8, #0xaa - add r6, r6, r2, lsr #1 - and r2, r6, #0xcc + and r9, r8, #0xaa + add r6, r6, r9, lsr #1 + and r9, r6, #0xcc and r6, r6, #0x33 - add r6, r6, r2, lsr #2 + add r6, r6, r9, lsr #2 movs r7, r8, lsr #9 @ C = r8 bit 8 (R bit) adc r6, r6, r6, lsr #4 @ high + low nibble + R bit and r6, r6, #15 @ number of regs to transfer @@ -211,11 +211,11 @@ ENTRY(v4t_late_abort) .data_thumb_ldmstm: and r6, r8, #0x55 @ hweight8(r8) - and r2, r8, #0xaa - add r6, r6, r2, lsr #1 - and r2, r6, #0xcc + and r9, r8, #0xaa + add r6, r6, r9, lsr #1 + and r9, r6, #0xcc and r6, r6, #0x33 - add r6, r6, r2, lsr #2 + add r6, r6, r9, lsr #2 add r6, r6, r6, lsr #4 and r5, r8, #7 << 8 ldr r7, [sp, r5, lsr #6] diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index e7be700..d4c328e 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -87,12 +87,12 @@ ENTRY(cpu_arm6_data_abort) mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 - and r2, r8, r7, lsl #1 - add r6, r6, r2, lsr #1 - and r2, r8, r7, lsl #2 - add r6, r6, r2, lsr #2 - and r2, r8, r7, lsl #3 - add r6, r6, r2, lsr #3 + and r9, r8, r7, lsl #1 + add r6, r6, r9, lsr #1 + and r9, r8, r7, lsl #2 + add r6, r6, r9, lsr #2 + and r9, r8, r7, lsl #3 + add r6, r6, r9, lsr #3 add r6, r6, r6, lsr #8 add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. @@ -117,13 +117,13 @@ ENTRY(cpu_arm6_data_abort) tst r8, #1 << 21 @ check writeback bit moveq pc, lr @ no writeback -> no fixup .data_arm_lateldrpostconst: - movs r2, r8, lsl #20 @ Get offset + movs r9, r8, lsl #20 @ Get offset moveq pc, lr @ zero -> no fixup and r5, r8, #15 << 16 @ Extract 'n' from instruction ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit - subne r7, r7, r2, lsr #20 @ Undo increment - addeq r7, r7, r2, lsr #20 @ Undo decrement + subne r7, r7, r9, lsr #20 @ Undo increment + addeq r7, r7, r9, lsr #20 @ Undo decrement str r7, [sp, r5, lsr #14] @ Put register 'Rn' mov pc, lr -- cgit v0.10.2 From da7404725781bc7c736e10cae5521e5604e222a5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 16:01:26 +0100 Subject: ARM: entry: data abort: tail-call the main data abort handler Tail-call the main C data abort handler code from the per-CPU helper code. Update the comments in the code wrt the new calling and return register state. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 85298c0..bbdd443 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -60,6 +60,7 @@ @ @ Call the processor-specific abort handler: @ + @ r2 - pt_regs @ r4 - aborted context pc @ r5 - aborted context psr @ @@ -186,13 +187,8 @@ ENDPROC(__und_invalid) .align 5 __dabt_svc: svc_entry - dabt_helper - - @ - @ call main handler - @ mov r2, sp - bl do_DataAbort + dabt_helper @ @ IRQs off again before pulling preserved data off the stack @@ -407,11 +403,9 @@ ENDPROC(__pabt_svc) __dabt_usr: usr_entry kuser_cmpxchg_check - dabt_helper - mov r2, sp - adr lr, BSYM(ret_from_exception) - b do_DataAbort + dabt_helper + b ret_from_exception UNWIND(.fnend ) ENDPROC(__dabt_usr) diff --git a/arch/arm/mm/abort-ev4.S b/arch/arm/mm/abort-ev4.S index beb112b..54473cd 100644 --- a/arch/arm/mm/abort-ev4.S +++ b/arch/arm/mm/abort-ev4.S @@ -3,14 +3,11 @@ /* * Function: v4_early_abort * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -25,4 +22,4 @@ ENTRY(v4_early_abort) bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev4t.S b/arch/arm/mm/abort-ev4t.S index eaa4ac0..9da704e 100644 --- a/arch/arm/mm/abort-ev4t.S +++ b/arch/arm/mm/abort-ev4t.S @@ -4,14 +4,11 @@ /* * Function: v4t_early_abort * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -27,4 +24,4 @@ ENTRY(v4t_early_abort) bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S index 751391a..a0908d4 100644 --- a/arch/arm/mm/abort-ev5t.S +++ b/arch/arm/mm/abort-ev5t.S @@ -4,14 +4,11 @@ /* * Function: v5t_early_abort * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -28,4 +25,4 @@ ENTRY(v5t_early_abort) do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S index ccfbc93..4006b7a 100644 --- a/arch/arm/mm/abort-ev5tj.S +++ b/arch/arm/mm/abort-ev5tj.S @@ -4,14 +4,11 @@ /* * Function: v5tj_early_abort * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -24,10 +21,10 @@ ENTRY(v5tj_early_abort) mrc p15, 0, r0, c6, c0, 0 @ get FAR bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r5, #PSR_J_BIT @ Java? - movne pc, lr + bne do_DataAbort do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 ldreq r3, [r4] @ read aborted ARM instruction do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index b64d886..ff1f7cc 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -4,14 +4,11 @@ /* * Function: v6_early_abort * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -34,7 +31,7 @@ ENTRY(v6_early_abort) */ bic r1, r1, #1 << 11 @ clear bit 11 of FSR tst r5, #PSR_J_BIT @ Java? - movne pc, lr + bne do_DataAbort do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 ldreq r3, [r4] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 @@ -43,4 +40,4 @@ ENTRY(v6_early_abort) do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index 6f98b3a..7033752 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -3,14 +3,11 @@ /* * Function: v7_early_abort * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. */ @@ -37,18 +34,18 @@ ENTRY(v7_early_abort) ldr r3, =0x40d @ On permission fault and r3, r1, r3 cmp r3, #0x0d - movne pc, lr + bne do_DataAbort mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR isb mrc p15, 0, ip, c7, c4, 0 @ Read the PAR and r3, ip, #0x7b @ On translation fault cmp r3, #0x0b - movne pc, lr + bne do_DataAbort bic r1, r1, #0xf @ Fix up FSR FS[5:0] and ip, ip, #0x7e orr r1, r1, ip, LSR #1 #endif - mov pc, lr + b do_DataAbort ENDPROC(v7_early_abort) diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index d032b1f..d432f31 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -3,7 +3,8 @@ /* * Function: v4t_late_abort * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * * Returns : r0 = address of abort @@ -47,20 +48,18 @@ ENTRY(v4t_late_abort) /* 9 */ b .data_arm_ldmstm @ ldm*b rn, /* a */ b .data_unknown /* b */ b .data_unknown -/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m -/* d */ mov pc, lr @ ldc rd, [rn, #m] +/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m +/* d */ b do_DataAbort @ ldc rd, [rn, #m] /* e */ b .data_unknown /* f */ .data_unknown: @ Part of jumptable mov r0, r4 mov r1, r8 - mov r2, sp - bl baddataabort - b ret_from_exception + b baddataabort .data_arm_ldmstm: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 @@ -79,11 +78,11 @@ ENTRY(v4t_late_abort) subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + b do_DataAbort .data_arm_lateldrhpre: tst r8, #1 << 21 @ Check writeback bit - moveq pc, lr @ No writeback -> no fixup + beq do_DataAbort @ No writeback -> no fixup .data_arm_lateldrhpost: and r5, r8, #0x00f @ get Rm / low nibble of immediate value tst r8, #1 << 22 @ if (immediate offset) @@ -97,25 +96,25 @@ ENTRY(v4t_late_abort) subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + b do_DataAbort .data_arm_lateldrpreconst: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostconst: movs r9, r8, lsl #20 @ Get offset - moveq pc, lr @ zero -> no fixup + beq do_DataAbort @ zero -> no fixup and r5, r8, #15 << 16 @ Extract 'n' from instruction ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r9, lsr #20 @ Undo increment addeq r7, r7, r9, lsr #20 @ Undo decrement str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + b do_DataAbort .data_arm_lateldrprereg: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' @@ -172,10 +171,10 @@ ENTRY(v4t_late_abort) /* 3 */ b .data_unknown /* 4 */ b .data_unknown /* 5 */ b .data_thumb_reg -/* 6 */ mov pc, lr -/* 7 */ mov pc, lr -/* 8 */ mov pc, lr -/* 9 */ mov pc, lr +/* 6 */ b do_DataAbort +/* 7 */ b do_DataAbort +/* 8 */ b do_DataAbort +/* 9 */ b do_DataAbort /* A */ b .data_unknown /* B */ b .data_thumb_pushpop /* C */ b .data_thumb_ldmstm @@ -185,10 +184,10 @@ ENTRY(v4t_late_abort) .data_thumb_reg: tst r8, #1 << 9 - moveq pc, lr + beq do_DataAbort tst r8, #1 << 10 @ If 'S' (signed) bit is set movne r1, #0 @ it must be a load instr - mov pc, lr + b do_DataAbort .data_thumb_pushpop: tst r8, #1 << 10 @@ -207,7 +206,7 @@ ENTRY(v4t_late_abort) addeq r7, r7, r6, lsl #2 @ increment SP if PUSH subne r7, r7, r6, lsl #2 @ decrement SP if POP str r7, [sp, #13 << 2] - mov pc, lr + b do_DataAbort .data_thumb_ldmstm: and r6, r8, #0x55 @ hweight8(r8) @@ -222,4 +221,4 @@ ENTRY(v4t_late_abort) and r6, r6, #15 @ number of regs to transfer sub r7, r7, r6, lsl #2 @ always decrement str r7, [sp, r5, lsr #6] - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index af97a10..52162d5 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -18,7 +18,7 @@ orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes tst \tmp, #1 << 11 @ L = 0 -> write orreq \psr, \psr, #1 << 11 @ yes. - mov pc, lr + b do_DataAbort not_thumb: .endm @@ -34,7 +34,7 @@ not_thumb: bne not_ldrd and \tmp, \insn, #0x000000f0 @ [7:4] == 1101 cmp \tmp, #0x000000d0 - moveq pc, lr + beq do_DataAbort not_ldrd: .endm diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S index 9eaef6f..119cb47 100644 --- a/arch/arm/mm/abort-nommu.S +++ b/arch/arm/mm/abort-nommu.S @@ -3,11 +3,11 @@ /* * Function: nommu_early_abort * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r0 = 0 (abort address) - * : r1 = 0 (FSR) + * Returns : r4 - r11, r13 preserved * * Note: There is no FSR/FAR on !CPU_CP15_MMU cores. * Just fill zero into the registers. @@ -16,5 +16,5 @@ ENTRY(nommu_early_abort) mov r0, #0 @ clear r0, r1 (no FSR/FAR) mov r1, #0 - mov pc, lr + b do_DataAbort ENDPROC(nommu_early_abort) diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index d4c328e..d755d5b 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -29,7 +29,8 @@ ENTRY(cpu_arm7_dcache_clean_area) /* * Function: arm6_7_data_abort () * - * Params : r4 = aborted context pc + * Params : r2 = pt_regs + * : r4 = aborted context pc * : r5 = aborted context psr * * Purpose : obtain information about current aborted instruction @@ -49,7 +50,7 @@ ENTRY(cpu_arm7_data_abort) nop /* 0 */ b .data_unknown -/* 1 */ mov pc, lr @ swp +/* 1 */ b do_DataAbort @ swp /* 2 */ b .data_unknown /* 3 */ b .data_unknown /* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m @@ -60,16 +61,14 @@ ENTRY(cpu_arm7_data_abort) /* 9 */ b .data_arm_ldmstm @ ldm*b rn, /* a */ b .data_unknown /* b */ b .data_unknown -/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m -/* d */ mov pc, lr @ ldc rd, [rn, #m] +/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m +/* d */ b do_DataAbort @ ldc rd, [rn, #m] /* e */ b .data_unknown /* f */ .data_unknown: @ Part of jumptable mov r0, r4 mov r1, r8 - mov r2, sp - bl baddataabort - b ret_from_exception + b baddataabort ENTRY(cpu_arm6_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR @@ -79,11 +78,11 @@ ENTRY(cpu_arm6_data_abort) orreq r1, r1, #1 << 11 @ yes. and r7, r8, #14 << 24 teq r7, #8 << 24 @ was it ldm/stm - movne pc, lr + bne do_DataAbort .data_arm_ldmstm: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 @@ -102,7 +101,7 @@ ENTRY(cpu_arm6_data_abort) subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + b do_DataAbort .data_arm_apply_r6_and_rn: and r5, r8, #15 << 16 @ Extract 'n' from instruction @@ -111,25 +110,25 @@ ENTRY(cpu_arm6_data_abort) subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + b do_DataAbort .data_arm_lateldrpreconst: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostconst: movs r9, r8, lsl #20 @ Get offset - moveq pc, lr @ zero -> no fixup + beq do_DataAbort @ zero -> no fixup and r5, r8, #15 << 16 @ Extract 'n' from instruction ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r9, lsr #20 @ Undo increment addeq r7, r7, r9, lsr #20 @ Undo decrement str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + b do_DataAbort .data_arm_lateldrprereg: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' -- cgit v0.10.2 From e22c12f9146d50ee6b0cf97db46b3310409f64e6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 27 Jun 2011 09:52:54 +0100 Subject: ARM: entry: data abort: use r2 as base of pt_regs rather than stack Now that we pass r2 into these helper functions as the pointer to pt_regs, use r2 as the base of the registers on the stack rather than using the stack pointer directly. Signed-off-by: Russell King diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index d432f31..921aaab 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -73,11 +73,11 @@ ENTRY(v4t_late_abort) add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r5, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrhpre: @@ -88,14 +88,14 @@ ENTRY(v4t_late_abort) tst r8, #1 << 22 @ if (immediate offset) andne r6, r8, #0xf00 @ { immediate high nibble orrne r6, r5, r6, lsr #4 @ combine nibbles } else - ldreq r6, [sp, r5, lsl #2] @ { load Rm value } + ldreq r6, [r2, r5, lsl #2] @ { load Rm value } .data_arm_apply_r6_and_rn: and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r5, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrpreconst: @@ -105,11 +105,11 @@ ENTRY(v4t_late_abort) movs r9, r8, lsl #20 @ Get offset beq do_DataAbort @ zero -> no fixup and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r9, lsr #20 @ Undo increment addeq r7, r7, r9, lsr #20 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r5, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrprereg: @@ -117,7 +117,7 @@ ENTRY(v4t_late_abort) beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction - ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' + ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' mov r5, r8, lsr #7 @ get shift count ands r5, r5, #31 and r7, r8, #0x70 @ get shift type @@ -201,11 +201,11 @@ ENTRY(v4t_late_abort) movs r7, r8, lsr #9 @ C = r8 bit 8 (R bit) adc r6, r6, r6, lsr #4 @ high + low nibble + R bit and r6, r6, #15 @ number of regs to transfer - ldr r7, [sp, #13 << 2] + ldr r7, [r2, #13 << 2] tst r8, #1 << 11 addeq r7, r7, r6, lsl #2 @ increment SP if PUSH subne r7, r7, r6, lsl #2 @ decrement SP if POP - str r7, [sp, #13 << 2] + str r7, [r2, #13 << 2] b do_DataAbort .data_thumb_ldmstm: @@ -217,8 +217,8 @@ ENTRY(v4t_late_abort) add r6, r6, r9, lsr #2 add r6, r6, r6, lsr #4 and r5, r8, #7 << 8 - ldr r7, [sp, r5, lsr #6] + ldr r7, [r2, r5, lsr #6] and r6, r6, #15 @ number of regs to transfer sub r7, r7, r6, lsl #2 @ always decrement - str r7, [sp, r5, lsr #6] + str r7, [r2, r5, lsr #6] b do_DataAbort diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index d755d5b..141906e 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -96,20 +96,20 @@ ENTRY(cpu_arm6_data_abort) add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r5, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_apply_r6_and_rn: and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r5, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrpreconst: @@ -119,11 +119,11 @@ ENTRY(cpu_arm6_data_abort) movs r9, r8, lsl #20 @ Get offset beq do_DataAbort @ zero -> no fixup and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r9, lsr #20 @ Undo increment addeq r7, r7, r9, lsr #20 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r5, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrprereg: @@ -131,7 +131,7 @@ ENTRY(cpu_arm6_data_abort) beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction - ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' + ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' mov r5, r8, lsr #7 @ get shift count ands r5, r5, #31 and r7, r8, #0x70 @ get shift type -- cgit v0.10.2 From 108f6af0a82cf3b61f3ac6728e2241805a935b64 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 27 Jun 2011 12:23:11 +0100 Subject: ARM: entry: data abort: always use r6 for offset Signed-off-by: Russell King diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index 921aaab..54b6d27 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -102,13 +102,13 @@ ENTRY(v4t_late_abort) tst r8, #1 << 21 @ check writeback bit beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostconst: - movs r9, r8, lsl #20 @ Get offset + movs r6, r8, lsl #20 @ Get offset beq do_DataAbort @ zero -> no fixup and r5, r8, #15 << 16 @ Extract 'n' from instruction ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit - subne r7, r7, r9, lsr #20 @ Undo increment - addeq r7, r7, r9, lsr #20 @ Undo decrement + subne r7, r7, r6, lsr #20 @ Undo increment + addeq r7, r7, r6, lsr #20 @ Undo decrement str r7, [r2, r5, lsr #14] @ Put register 'Rn' b do_DataAbort diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 141906e..4d96311 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -116,13 +116,13 @@ ENTRY(cpu_arm6_data_abort) tst r8, #1 << 21 @ check writeback bit beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostconst: - movs r9, r8, lsl #20 @ Get offset + movs r6, r8, lsl #20 @ Get offset beq do_DataAbort @ zero -> no fixup and r5, r8, #15 << 16 @ Extract 'n' from instruction ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit - subne r7, r7, r9, lsr #20 @ Undo increment - addeq r7, r7, r9, lsr #20 @ Undo decrement + subne r7, r7, r6, lsr #20 @ Undo increment + addeq r7, r7, r6, lsr #20 @ Undo decrement str r7, [r2, r5, lsr #14] @ Put register 'Rn' b do_DataAbort -- cgit v0.10.2 From 40f0b90a2f16f433f9afbfef4b7c312efb54e933 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 27 Jun 2011 12:27:47 +0100 Subject: ARM: entry: data abort: ensure r5 is preserved by abort functions Signed-off-by: Russell King diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index 54b6d27..f398258 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -7,11 +7,7 @@ * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4-r5, r10-r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -72,30 +68,30 @@ ENTRY(v4t_late_abort) add r6, r6, r6, lsr #8 add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement - str r7, [r2, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r9, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrhpre: tst r8, #1 << 21 @ Check writeback bit beq do_DataAbort @ No writeback -> no fixup .data_arm_lateldrhpost: - and r5, r8, #0x00f @ get Rm / low nibble of immediate value + and r9, r8, #0x00f @ get Rm / low nibble of immediate value tst r8, #1 << 22 @ if (immediate offset) andne r6, r8, #0xf00 @ { immediate high nibble - orrne r6, r5, r6, lsr #4 @ combine nibbles } else - ldreq r6, [r2, r5, lsl #2] @ { load Rm value } + orrne r6, r9, r6, lsr #4 @ combine nibbles } else + ldreq r6, [r2, r9, lsl #2] @ { load Rm value } .data_arm_apply_r6_and_rn: - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement - str r7, [r2, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r9, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrpreconst: @@ -104,12 +100,12 @@ ENTRY(v4t_late_abort) .data_arm_lateldrpostconst: movs r6, r8, lsl #20 @ Get offset beq do_DataAbort @ zero -> no fixup - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsr #20 @ Undo increment addeq r7, r7, r6, lsr #20 @ Undo decrement - str r7, [r2, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r9, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrprereg: @@ -118,14 +114,14 @@ ENTRY(v4t_late_abort) .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' - mov r5, r8, lsr #7 @ get shift count - ands r5, r5, #31 + mov r9, r8, lsr #7 @ get shift count + ands r9, r9, #31 and r7, r8, #0x70 @ get shift type orreq r7, r7, #8 @ shift count = 0 add pc, pc, r7 nop - mov r6, r6, lsl r5 @ 0: LSL #!0 + mov r6, r6, lsl r9 @ 0: LSL #!0 b .data_arm_apply_r6_and_rn b .data_arm_apply_r6_and_rn @ 1: LSL #0 nop @@ -133,7 +129,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ 3: MUL? nop - mov r6, r6, lsr r5 @ 4: LSR #!0 + mov r6, r6, lsr r9 @ 4: LSR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, lsr #32 @ 5: LSR #32 b .data_arm_apply_r6_and_rn @@ -141,7 +137,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ 7: MUL? nop - mov r6, r6, asr r5 @ 8: ASR #!0 + mov r6, r6, asr r9 @ 8: ASR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, asr #32 @ 9: ASR #32 b .data_arm_apply_r6_and_rn @@ -149,7 +145,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ B: MUL? nop - mov r6, r6, ror r5 @ C: ROR #!0 + mov r6, r6, ror r9 @ C: ROR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, rrx @ D: RRX b .data_arm_apply_r6_and_rn @@ -216,9 +212,9 @@ ENTRY(v4t_late_abort) and r6, r6, #0x33 add r6, r6, r9, lsr #2 add r6, r6, r6, lsr #4 - and r5, r8, #7 << 8 - ldr r7, [r2, r5, lsr #6] + and r9, r8, #7 << 8 + ldr r7, [r2, r9, lsr #6] and r6, r6, #15 @ number of regs to transfer sub r7, r7, r6, lsl #2 @ always decrement - str r7, [r2, r5, lsr #6] + str r7, [r2, r9, lsr #6] b do_DataAbort diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 4d96311..50e3543 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -35,8 +35,7 @@ ENTRY(cpu_arm7_dcache_clean_area) * * Purpose : obtain information about current aborted instruction * - * Returns : r0 = address of abort - * : r1 = FSR + * Returns : r4-r5, r10-r11, r13 preserved */ ENTRY(cpu_arm7_data_abort) @@ -95,21 +94,21 @@ ENTRY(cpu_arm6_data_abort) add r6, r6, r6, lsr #8 add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement - str r7, [r2, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r9, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_apply_r6_and_rn: - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement - str r7, [r2, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r9, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrpreconst: @@ -118,12 +117,12 @@ ENTRY(cpu_arm6_data_abort) .data_arm_lateldrpostconst: movs r6, r8, lsl #20 @ Get offset beq do_DataAbort @ zero -> no fixup - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [r2, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsr #20 @ Undo increment addeq r7, r7, r6, lsr #20 @ Undo decrement - str r7, [r2, r5, lsr #14] @ Put register 'Rn' + str r7, [r2, r9, lsr #14] @ Put register 'Rn' b do_DataAbort .data_arm_lateldrprereg: @@ -132,14 +131,14 @@ ENTRY(cpu_arm6_data_abort) .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' - mov r5, r8, lsr #7 @ get shift count - ands r5, r5, #31 + mov r9, r8, lsr #7 @ get shift count + ands r9, r9, #31 and r7, r8, #0x70 @ get shift type orreq r7, r7, #8 @ shift count = 0 add pc, pc, r7 nop - mov r6, r6, lsl r5 @ 0: LSL #!0 + mov r6, r6, lsl r9 @ 0: LSL #!0 b .data_arm_apply_r6_and_rn b .data_arm_apply_r6_and_rn @ 1: LSL #0 nop @@ -147,7 +146,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ 3: MUL? nop - mov r6, r6, lsr r5 @ 4: LSR #!0 + mov r6, r6, lsr r9 @ 4: LSR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, lsr #32 @ 5: LSR #32 b .data_arm_apply_r6_and_rn @@ -155,7 +154,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ 7: MUL? nop - mov r6, r6, asr r5 @ 8: ASR #!0 + mov r6, r6, asr r9 @ 8: ASR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, asr #32 @ 9: ASR #32 b .data_arm_apply_r6_and_rn @@ -163,7 +162,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ B: MUL? nop - mov r6, r6, ror r5 @ C: ROR #!0 + mov r6, r6, ror r9 @ C: ROR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, rrx @ D: RRX b .data_arm_apply_r6_and_rn -- cgit v0.10.2 From 30891c90d81133179cc47eb77c30764a3b5dad5c Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Jun 2011 12:47:08 +0100 Subject: ARM: entry: no need to reload the SPSR value from struct pt_regs The SVC IRQ, prefetch and data abort handlers preserve the SPSR value via r5 across the exception. Rather than re-loading it from pt_regs, use the preserved value instead. Signed-off-by: Russell King diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bbdd443..fa02a22 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -195,10 +195,6 @@ __dabt_svc: @ disable_irq_notrace - @ - @ restore SPSR and restart the instruction - @ - ldr r5, [sp, #S_PSR] #ifdef CONFIG_TRACE_IRQFLAGS tst r5, #PSR_I_BIT bleq trace_hardirqs_on @@ -223,7 +219,7 @@ __irq_svc: tst r0, #_TIF_NEED_RESCHED blne svc_preempt #endif - ldr r5, [sp, #S_PSR] + #ifdef CONFIG_TRACE_IRQFLAGS @ The parent context IRQs must have been enabled to get here in @ the first place, so there's no point checking the PSR I bit. @@ -308,10 +304,6 @@ __pabt_svc: @ disable_irq_notrace - @ - @ restore SPSR and restart the instruction - @ - ldr r5, [sp, #S_PSR] #ifdef CONFIG_TRACE_IRQFLAGS tst r5, #PSR_I_BIT bleq trace_hardirqs_on -- cgit v0.10.2 From 5efb54cc3fc104585cda81c44676f05115bd9ddd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 30 Jun 2011 15:07:31 -0700 Subject: PM: Documentation: fix typo: pm_runtime_idle_sync() doesn't exist. Replace reference to pm_runtime_idle_sync() in the driver core with pm_runtime_put_sync() which is used in the code. Signed-off-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 22accb3..518d9be 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -506,7 +506,7 @@ pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts, they will fail returning -EAGAIN, because the device's usage counter is incremented by the core before executing ->probe() and ->remove(). Still, it may be desirable to suspend the device as soon as ->probe() or ->remove() has -finished, so the PM core uses pm_runtime_idle_sync() to invoke the +finished, so the PM core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for the device at that time. The user space can effectively disallow the driver of the device to power manage -- cgit v0.10.2 From f5da24dbed213d103f00aa9ef26e010b50d2db24 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 2 Jul 2011 14:27:11 +0200 Subject: PM / Runtime: Update documentation regarding driver removal Commit e1866b33b1e89f077b7132daae3dfd9a594e9a1a (PM / Runtime: Rework runtime PM handling during driver removal) forgot to update the documentation in Documentation/power/runtime_pm.txt to match the new code in drivers/base/dd.c. Update that documentation to match the code it describes. Signed-off-by: Rafael J. Wysocki Reviewed-by: Kevin Hilman diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 518d9be..b24875b 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -501,13 +501,29 @@ helper functions described in Section 4. In that case, pm_runtime_resume() should be used. Of course, for this purpose the device's run-time PM has to be enabled earlier by calling pm_runtime_enable(). -If the device bus type's or driver's ->probe() or ->remove() callback runs +If the device bus type's or driver's ->probe() callback runs pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts, they will fail returning -EAGAIN, because the device's usage counter is -incremented by the core before executing ->probe() and ->remove(). Still, it -may be desirable to suspend the device as soon as ->probe() or ->remove() has -finished, so the PM core uses pm_runtime_put_sync() to invoke the -subsystem-level idle callback for the device at that time. +incremented by the driver core before executing ->probe(). Still, it may be +desirable to suspend the device as soon as ->probe() has finished, so the driver +core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for +the device at that time. + +Moreover, the driver core prevents runtime PM callbacks from racing with the bus +notifier callback in __device_release_driver(), which is necessary, because the +notifier is used by some subsystems to carry out operations affecting the +runtime PM functionality. It does so by calling pm_runtime_get_sync() before +driver_sysfs_remove() and the BUS_NOTIFY_UNBIND_DRIVER notifications. This +resumes the device if it's in the suspended state and prevents it from +being suspended again while those routines are being executed. + +To allow bus types and drivers to put devices into the suspended state by +calling pm_runtime_suspend() from their ->remove() routines, the driver core +executes pm_runtime_put_sync() after running the BUS_NOTIFY_UNBIND_DRIVER +notifications in __device_release_driver(). This requires bus types and +drivers to make their ->remove() callbacks avoid races with runtime PM directly, +but also it allows of more flexibility in the handling of devices during the +removal of their drivers. The user space can effectively disallow the driver of the device to power manage it at run time by changing the value of its /sys/devices/.../power/control -- cgit v0.10.2 From 6f231dda68080759f1aed3769896e94c73099f0f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 2 Jul 2011 22:56:22 -0700 Subject: isci: Intel(R) C600 Series Chipset Storage Control Unit Driver Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the chipset. This is a snapshot of the first publicly available version of the driver, commit 4c1db2d0 in the 'historical' branch. git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical Signed-off-by: Maciej Trela Signed-off-by: Dave Jiang Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 4a1f029..3aa664f 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -830,6 +830,40 @@ config SCSI_GDTH To compile this driver as a module, choose M here: the module will be called gdth. +config SCSI_ISCI + tristate "Intel(R) C600 Series Chipset SAS Controller" + depends on PCI && SCSI + # little endian host assumptions + depends on X86 + # (temporary): dma api misuse + depends on !DMAR + # (temporary): known alpha quality driver + depends on EXPERIMENTAL + select SCSI_SAS_LIBSAS + ---help--- + This driver supports the 6Gb/s SAS capabilities of the storage + control unit found in the Intel(R) C600 series chipset. + + The experimental tag will be removed after the driver exits alpha + +choice + prompt "Default Silicon Revision" + depends on SCSI_ISCI + default PBG_HBA_A2 + # temporary A-step silicon is pre-production + +config PBG_HBA_BETA + bool "B0" + +config PBG_HBA_A2 + bool "A2" + +config PBG_HBA_A0 + bool "A0" + +endchoice + + config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 7ad0b8a..3c08f53 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -73,6 +73,7 @@ obj-$(CONFIG_SCSI_AACRAID) += aacraid/ obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_PM8001) += pm8001/ +obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile new file mode 100644 index 0000000..34f7af3 --- /dev/null +++ b/drivers/scsi/isci/Makefile @@ -0,0 +1,30 @@ +#TODO kill SCIC_SDS_4_ENABLED it is always true for this +#generation of silicon +EXTRA_CFLAGS += -DSCIC_SDS_4_ENABLED + +#temporary until atapi support ready +EXTRA_CFLAGS += -DDISABLE_ATAPI + +EXTRA_CFLAGS += -Idrivers/scsi/isci/core/ -Idrivers/scsi/isci/ +obj-$(CONFIG_SCSI_ISCI) += isci.o +isci-objs := init.o phy.o request.o sata.o \ + remote_device.o port.o timers.o deprecated.o \ + host.o task.o events.o \ + core/scic_sds_controller.o \ + core/scic_sds_remote_device.o \ + core/scic_sds_request.o \ + core/scic_sds_stp_request.o \ + core/scic_sds_stp_packet_request.o \ + core/scic_sds_stp_remote_device.o \ + core/scic_sds_port.o \ + core/scic_sds_port_configuration_agent.o \ + core/scic_sds_phy.o \ + core/scic_sds_ssp_request.o \ + core/scic_sds_remote_node_context.o \ + core/scic_sds_smp_request.o \ + core/scic_sds_smp_remote_device.o \ + core/scic_sds_remote_node_table.o \ + core/scic_sds_unsolicited_frame_control.o \ + core/sci_base_memory_descriptor_list.o \ + core/sci_base_state_machine.o \ + core/sci_util.o diff --git a/drivers/scsi/isci/core/intel_ata.h b/drivers/scsi/isci/core/intel_ata.h new file mode 100644 index 0000000..48b297e --- /dev/null +++ b/drivers/scsi/isci/core/intel_ata.h @@ -0,0 +1,554 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file defines all of the ATA related constants, enumerations, and types. + * Please note that this file does not necessarily contain an exhaustive + * list of all constants, commands, sub-commands, etc. + * + * + */ + +#ifndef _ATA_H_ +#define _ATA_H_ + +#include + +/** + * + * + * ATA_COMMAND_CODES These constants depict the various ATA command codes + * defined in the ATA/ATAPI specification. + */ +#define ATA_IDENTIFY_DEVICE 0xEC +#define ATA_CHECK_POWER_MODE 0xE5 +#define ATA_STANDBY 0xE2 +#define ATA_STANDBY_IMMED 0xE0 +#define ATA_IDLE_IMMED 0xE1 +#define ATA_IDLE 0xE3 +#define ATA_FLUSH_CACHE 0xE7 +#define ATA_FLUSH_CACHE_EXT 0xEA +#define ATA_READ_DMA_EXT 0x25 +#define ATA_READ_DMA 0xC8 +#define ATA_READ_SECTORS_EXT 0x24 +#define ATA_READ_SECTORS 0x20 +#define ATA_WRITE_DMA_EXT 0x35 +#define ATA_WRITE_DMA 0xCA +#define ATA_WRITE_SECTORS_EXT 0x34 +#define ATA_WRITE_SECTORS 0x30 +#define ATA_WRITE_UNCORRECTABLE 0x45 +#define ATA_READ_VERIFY_SECTORS 0x40 +#define ATA_READ_VERIFY_SECTORS_EXT 0x42 +#define ATA_READ_BUFFER 0xE4 +#define ATA_WRITE_BUFFER 0xE8 +#define ATA_EXECUTE_DEVICE_DIAG 0x90 +#define ATA_SET_FEATURES 0xEF +#define ATA_SMART 0xB0 +#define ATA_PACKET_IDENTIFY 0xA1 +#define ATA_PACKET 0xA0 +#define ATA_READ_FPDMA 0x60 +#define ATA_WRITE_FPDMA 0x61 +#define ATA_READ_LOG_EXT 0x2F +#define ATA_NOP 0x00 +#define ATA_DEVICE_RESET 0x08 +#define ATA_MEDIA_EJECT 0xED + +/** + * + * + * ATA_SMART_SUB_COMMAND_CODES These constants define the ATA SMART command + * sub-codes that can be executed. + */ +#define ATA_SMART_SUB_CMD_ENABLE 0xD8 +#define ATA_SMART_SUB_CMD_DISABLE 0xD9 +#define ATA_SMART_SUB_CMD_RETURN_STATUS 0xDA +#define ATA_SMART_SUB_CMD_READ_LOG 0xD5 + +/** + * + * + * ATA_SET_FEATURES_SUB_COMMAND_CODES These constants define the ATA SET + * FEATURES command sub-codes that can be executed. + */ +#define ATA_SET_FEATURES_SUB_CMD_ENABLE_CACHE 0x02 +#define ATA_SET_FEATURES_SUB_CMD_DISABLE_CACHE 0x82 +#define ATA_SET_FEATURES_SUB_CMD_DISABLE_READ_AHEAD 0x55 +#define ATA_SET_FEATURES_SUB_CMD_ENABLE_READ_AHEAD 0xAA +#define ATA_SET_FEATURES_SUB_CMD_SET_TRANSFER_MODE 0x3 + +/** + * + * + * ATA_READ_LOG_EXT_PAGE_CODES This is a list of log page codes available for + * use. + */ +#define ATA_LOG_PAGE_NCQ_ERROR 0x10 +#define ATA_LOG_PAGE_SMART_SELF_TEST 0x06 +#define ATA_LOG_PAGE_EXTENDED_SMART_SELF_TEST 0x07 + +/** + * + * + * ATA_LOG_PAGE_NCQ_ERROR_CONSTANTS These constants define standard values for + * use when requesting the NCQ error log page. + */ +#define ATA_LOG_PAGE_NCQ_ERROR_SECTOR 0 +#define ATA_LOG_PAGE_NCQ_ERROR_SECTOR_COUNT 1 + +/** + * + * + * ATA_STATUS_REGISTER_BITS The following are status register bit definitions + * per ATA/ATAPI-7. + */ +#define ATA_STATUS_REG_BSY_BIT 0x80 +#define ATA_STATUS_REG_DEVICE_FAULT_BIT 0x20 +#define ATA_STATUS_REG_ERROR_BIT 0x01 + +/** + * + * + * ATA_ERROR_REGISTER_BITS The following are error register bit definitions per + * ATA/ATAPI-7. + */ +#define ATA_ERROR_REG_NO_MEDIA_BIT 0x02 +#define ATA_ERROR_REG_ABORT_BIT 0x04 +#define ATA_ERROR_REG_MEDIA_CHANGE_REQUEST_BIT 0x08 +#define ATA_ERROR_REG_ID_NOT_FOUND_BIT 0x10 +#define ATA_ERROR_REG_MEDIA_CHANGE_BIT 0x20 +#define ATA_ERROR_REG_UNCORRECTABLE_BIT 0x40 +#define ATA_ERROR_REG_WRITE_PROTECTED_BIT 0x40 +#define ATA_ERROR_REG_ICRC_BIT 0x80 + +/** + * + * + * ATA_CONTROL_REGISTER_BITS The following are control register bit definitions + * per ATA/ATAPI-7 + */ +#define ATA_CONTROL_REG_INTERRUPT_ENABLE_BIT 0x02 +#define ATA_CONTROL_REG_SOFT_RESET_BIT 0x04 +#define ATA_CONTROL_REG_HIGH_ORDER_BYTE_BIT 0x80 + +/** + * + * + * ATA_DEVICE_HEAD_REGISTER_BITS The following are device/head register bit + * definitions per ATA/ATAPI-7. + */ +#define ATA_DEV_HEAD_REG_LBA_MODE_ENABLE 0x40 +#define ATA_DEV_HEAD_REG_FUA_ENABLE 0x80 + +/** + * + * + * ATA_IDENTIFY_DEVICE_FIELD_LENGTHS The following constants define the number + * of bytes contained in various fields found in the IDENTIFY DEVICE data + * structure. + */ +#define ATA_IDENTIFY_SERIAL_NUMBER_LEN 20 +#define ATA_IDENTIFY_MODEL_NUMBER_LEN 40 +#define ATA_IDENTIFY_FW_REVISION_LEN 8 +#define ATA_IDENTIFY_48_LBA_LEN 8 +#define ATA_IDENTIFY_MEDIA_SERIAL_NUMBER_LEN 30 +#define ATA_IDENTIFY_WWN_LEN 8 + +/** + * + * + * ATA_IDENTIFY_DEVICE_FIELD_MASKS The following constants define bit masks + * utilized to determine if a feature is supported/enabled or if a bit is + * simply set inside of the IDENTIFY DEVICE data structre. + */ +#define ATA_IDENTIFY_REMOVABLE_MEDIA_ENABLE 0x0080 +#define ATA_IDENTIFY_CAPABILITIES1_NORMAL_DMA_ENABLE 0x0100 +#define ATA_IDENTIFY_CAPABILITIES1_STANDBY_ENABLE 0x2000 +#define ATA_IDENTIFY_COMMAND_SET_SUPPORTED0_SMART_ENABLE 0x0001 +#define ATA_IDENTIFY_COMMAND_SET_SUPPORTED1_48BIT_ENABLE 0x0400 +#define ATA_IDENTIFY_COMMAND_SET_WWN_SUPPORT_ENABLE 0x0100 +#define ATA_IDENTIFY_COMMAND_SET_ENABLED0_SMART_ENABLE 0x0001 +#define ATA_IDENTIFY_SATA_CAPABILITIES_NCQ_ENABLE 0x0100 +#define ATA_IDENTIFY_NCQ_QUEUE_DEPTH_ENABLE 0x001F +#define ATA_IDENTIFY_SECTOR_LARGER_THEN_512_ENABLE 0x0100 +#define ATA_IDENTIFY_LOGICAL_SECTOR_PER_PHYSICAL_SECTOR_MASK 0x000F +#define ATA_IDENTIFY_LOGICAL_SECTOR_PER_PHYSICAL_SECTOR_ENABLE 0x2000 +#define ATA_IDENTIFY_WRITE_UNCORRECTABLE_SUPPORT 0x0004 +#define ATA_IDENTIFY_COMMAND_SET_SMART_SELF_TEST_SUPPORTED 0x0002 + +/** + * + * + * ATAPI_IDENTIFY_DEVICE_FIELD_MASKS These constants define the various bit + * definitions for the fields in the PACKET IDENTIFY DEVICE data structure. + */ +#define ATAPI_IDENTIFY_16BYTE_CMD_PCKT_ENABLE 0x01 + +/** + * + * + * ATA_PACKET_FEATURE_BITS These constants define the various bit definitions + * for the ATA PACKET feature register. + */ +#define ATA_PACKET_FEATURE_DMA 0x01 +#define ATA_PACKET_FEATURE_OVL 0x02 +#define ATA_PACKET_FEATURE_DMADIR 0x04 + +/** + * + * + * ATA_Device_Power_Mode_Values These constants define the power mode values + * returned by ATA_Check_Power_Mode + */ +#define ATA_STANDBY_POWER_MODE 0x00 +#define ATA_IDLE_POWER_MODE 0x80 +#define ATA_ACTIVE_POWER_MODE 0xFF + +/** + * + * + * ATA_WRITE_UNCORRECTIABLE feature field values These constants define the + * Write Uncorrectable feature values used with the SATI translation. + */ +#define ATA_WRITE_UNCORRECTABLE_PSUEDO 0x55 +#define ATA_WRITE_UNCORRECTABLE_FLAGGED 0xAA + + + +/** + * struct ATA_IDENTIFY_DEVICE - This structure depicts the ATA IDENTIFY DEVICE + * data format. + * + * + */ +struct ata_identify_device_data { + u16 general_config_bits; /* word 00 */ + u16 obsolete0; /* word 01 (num cylinders) */ + u16 vendor_specific_config_bits; /* word 02 */ + u16 obsolete1; /* word 03 (num heads) */ + u16 retired1[2]; /* words 04-05 */ + u16 obsolete2; /* word 06 (sectors / track) */ + u16 reserved_for_compact_flash1[2]; /* words 07-08 */ + u16 retired0; /* word 09 */ + u8 serial_number[ATA_IDENTIFY_SERIAL_NUMBER_LEN]; /* word 10-19 */ + u16 retired2[2]; /* words 20-21 */ + u16 obsolete4; /* word 22 */ + u8 firmware_revision[ATA_IDENTIFY_FW_REVISION_LEN]; /* words 23-26 */ + u8 model_number[ATA_IDENTIFY_MODEL_NUMBER_LEN]; /* words 27-46 */ + u16 max_sectors_per_multiple; /* word 47 */ + u16 reserved0; /* word 48 */ + u16 capabilities1; /* word 49 */ + u16 capabilities2; /* word 50 */ + u16 obsolete5[2]; /* words 51-52 */ + u16 validity_bits; /* word 53 */ + u16 obsolete6[5]; /* + * words 54-58 Used to be: + * current cylinders, + * current heads, + * current sectors/Track, + * current capacity */ + u16 current_max_sectors_per_multiple; /* word 59 */ + u8 total_num_sectors[4]; /* words 60-61 */ + u16 obsolete7; /* word 62 */ + u16 multi_word_dma_mode; /* word 63 */ + u16 pio_modes_supported; /* word 64 */ + u16 min_multiword_dma_transfer_cycle; /* word 65 */ + u16 rec_min_multiword_dma_transfer_cycle; /* word 66 */ + u16 min_pio_transfer_no_flow_ctrl; /* word 67 */ + u16 min_pio_transfer_with_flow_ctrl; /* word 68 */ + u16 reserved1[2]; /* words 69-70 */ + u16 reserved2[4]; /* words 71-74 */ + u16 queue_depth; /* word 75 */ + u16 serial_ata_capabilities; /* word 76 */ + u16 serial_ata_reserved; /* word 77 */ + u16 serial_ata_features_supported; /* word 78 */ + u16 serial_ata_features_enabled; /* word 79 */ + u16 major_version_number; /* word 80 */ + u16 minor_version_number; /* word 81 */ + u16 command_set_supported0; /* word 82 */ + u16 command_set_supported1; /* word 83 */ + u16 command_set_supported_extention; /* word 84 */ + u16 command_set_enabled0; /* word 85 */ + u16 command_set_enabled1; /* word 86 */ + u16 command_set_default; /* word 87 */ + u16 ultra_dma_mode; /* word 88 */ + u16 security_erase_completion_time; /* word 89 */ + u16 enhanced_security_erase_time; /* word 90 */ + u16 current_power_mgmt_value; /* word 91 */ + u16 master_password_revision; /* word 92 */ + u16 hardware_reset_result; /* word 93 */ + u16 current_acoustic_management_value; /* word 94 */ + u16 stream_min_request_size; /* word 95 */ + u16 stream_transfer_time; /* word 96 */ + u16 stream_access_latency; /* word 97 */ + u16 stream_performance_granularity[2]; /* words 98-99 */ + u8 max_48bit_lba[ATA_IDENTIFY_48_LBA_LEN]; /* words 100-103 */ + u16 streaming_transfer_time; /* word 104 */ + u16 reserved3; /* word 105 */ + u16 physical_logical_sector_info; /* word 106 */ + u16 acoustic_test_interseek_delay; /* word 107 */ + u8 world_wide_name[ATA_IDENTIFY_WWN_LEN]; /* words 108-111 */ + u8 reserved_for_wwn_extention[ATA_IDENTIFY_WWN_LEN]; /* words 112-115 */ + u16 reserved4; /* word 116 */ + u8 words_per_logical_sector[4]; /* words 117-118 */ + u16 command_set_supported2; /* word 119 */ + u16 reserved5[7]; /* words 120-126 */ + u16 removable_media_status; /* word 127 */ + u16 security_status; /* word 128 */ + u16 vendor_specific1[31]; /* words 129-159 */ + u16 cfa_power_mode1; /* word 160 */ + u16 reserved_for_compact_flash2[7]; /* words 161-167 */ + u16 device_nominal_form_factor; /* word 168 */ + u16 reserved_for_compact_flash3[7]; /* words 169-175 */ + u16 current_media_serial_number[ATA_IDENTIFY_MEDIA_SERIAL_NUMBER_LEN]; /* words 176-205 */ + u16 reserved6[3]; /* words 206-208 */ + u16 logical_sector_alignment; /* words 209 */ + u16 reserved7[7]; /* words 210-216 */ + u16 nominal_media_rotation_rate; /* word 217 */ + u16 reserved8[37]; /* words 218-254 */ + u16 integrity_word; /* word 255 */ + +}; + +#define ATA_IDENTIFY_DEVICE_GET_OFFSET(field_name) \ + ((unsigned long)&(((struct ata_identify_device_data *)0)->field_name)) +#define ATA_IDENTIFY_DEVICE_WCE_ENABLE 0x20 +#define ATA_IDENTIFY_DEVICE_RA_ENABLE 0x40 + +/** + * struct ATAPI_IDENTIFY_PACKET_DATA - The following structure depicts the + * ATA-ATAPI 7 version of the IDENTIFY PACKET DEVICE data structure. + * + * + */ +struct atapi_identify_packet_device { + u16 generalConfigBits; /* word 00 */ + u16 reserved0; /* word 01 (num cylinders) */ + u16 uniqueConfigBits; /* word 02 */ + u16 reserved1[7]; /* words 03 - 09 */ + u8 serialNumber[ATA_IDENTIFY_SERIAL_NUMBER_LEN]; /* word 10-19 */ + u16 reserved2[3]; /* words 20-22 */ + u8 firmwareRevision[ATA_IDENTIFY_FW_REVISION_LEN]; /* words 23-26 */ + u8 modelNumber[ATA_IDENTIFY_MODEL_NUMBER_LEN]; /* words 27-46 */ + u16 reserved4[2]; /* words 47-48 */ + u16 capabilities1; /* word 49 */ + u16 capabilities2; /* word 50 */ + u16 obsolete0[2]; /* words 51-52 */ + u16 validityBits; /* word 53 */ + u16 reserved[8]; /* words 54-61 */ + + u16 DMADIRBitRequired; /* word 62, page2 */ + u16 multiWordDmaMode; /* word 63 */ + u16 pioModesSupported; /* word 64 */ + u16 minMultiwordDmaTransferCycle; /* word 65 */ + u16 recMinMultiwordDmaTransferCycle; /* word 66 */ + u16 minPioTransferNoFlowCtrl; /* word 67 */ + u16 minPioTransferWithFlowCtrl; /* word 68 */ + u16 reserved6[2]; /* words 69-70 */ + u16 nsFromPACKETReceiptToBusRelease; /* word 71 */ + u16 nsFromSERVICEReceiptToBSYreset; /* wore 72 */ + u16 reserved7[2]; /* words 73-74 */ + u16 queueDepth; /* word 75 */ + u16 serialAtaCapabilities; /* word 76 */ + u16 serialAtaReserved; /* word 77 */ + u16 serialAtaFeaturesSupported; /* word 78 */ + u16 serialAtaFeaturesEnabled; /* word 79 */ + + u16 majorVersionNumber; /* word 80, page3 */ + u16 minorVersionNumber; /* word 81 */ + u16 commandSetSupported0; /* word 82 */ + u16 commandSetSupported1; /* word 83 */ + + u16 commandSetSupportedExtention; /* word 84, page4 */ + u16 commandSetEnabled0; /* word 85 */ + u16 commandSetEnabled1; /* word 86 */ + u16 commandSetDefault; /* word 87 */ + + u16 ultraDmaMode; /* word 88, page5 */ + u16 reserved8[4]; /* words 89 - 92 */ + + u16 hardwareResetResult; /* word 93, page6 */ + u16 currentAcousticManagementValue; /* word 94 */ + u16 reserved9[30]; /* words 95-124 */ + u16 ATAPIByteCount0Behavior; /* word 125 */ + u16 obsolete1; /* word 126 */ + u16 removableMediaStatus; /* word 127, */ + + u16 securityStatus; /* word 128, page7 */ + u16 vendorSpecific1[31]; /* words 129-159 */ + u16 reservedForCompactFlash[16]; /* words 160-175 */ + u16 reserved10[79]; /* words 176-254 */ + u16 integrityWord; /* word 255 */ +}; + +/** + * struct ata_extended_smart_self_test_log - The following structure depicts + * the ATA-8 version of the Extended SMART self test log page descriptor + * entry. + * + * + */ +union ata_descriptor_entry { + struct DESCRIPTOR_ENTRY { + u8 lba_field; + u8 status_byte; + u8 time_stamp_low; + u8 time_stamp_high; + u8 checkpoint_byte; + u8 failing_lba_low; + u8 failing_lba_mid; + u8 failing_lba_high; + u8 failing_lba_low_ext; + u8 failing_lba_mid_ext; + u8 failing_lba_high_ext; + + u8 vendor_specific1; + u8 vendor_specific2; + u8 vendor_specific3; + u8 vendor_specific4; + u8 vendor_specific5; + u8 vendor_specific6; + u8 vendor_specific7; + u8 vendor_specific8; + u8 vendor_specific9; + u8 vendor_specific10; + u8 vendor_specific11; + u8 vendor_specific12; + u8 vendor_specific13; + u8 vendor_specific14; + u8 vendor_specific15; + } DESCRIPTOR_ENTRY; + + u8 descriptor_entry[26]; + +}; + +/** + * struct ata_extended_smart_self_test_log - The following structure depicts + * the ATA-8 version of the SMART self test log page descriptor entry. + * + * + */ +union ata_smart_descriptor_entry { + struct SMART_DESCRIPTOR_ENTRY { + u8 lba_field; + u8 status_byte; + u8 time_stamp_low; + u8 time_stamp_high; + u8 checkpoint_byte; + u8 failing_lba_low; + u8 failing_lba_mid; + u8 failing_lba_high; + u8 failing_lba_low_ext; + + u8 vendor_specific1; + u8 vendor_specific2; + u8 vendor_specific3; + u8 vendor_specific4; + u8 vendor_specific5; + u8 vendor_specific6; + u8 vendor_specific7; + u8 vendor_specific8; + u8 vendor_specific9; + u8 vendor_specific10; + u8 vendor_specific11; + u8 vendor_specific12; + u8 vendor_specific13; + u8 vendor_specific14; + u8 vendor_specific15; + } SMART_DESCRIPTOR_ENTRY; + + u8 smart_descriptor_entry[24]; + +}; + +/** + * struct ata_extended_smart_self_test_log - The following structure depicts + * the ATA-8 version of the Extended SMART self test log page. + * + * + */ +struct ata_extended_smart_self_test_log { + u8 self_test_log_data_structure_revision_number; /* byte 0 */ + u8 reserved0; /* byte 1 */ + u8 self_test_descriptor_index[2]; /* byte 2-3 */ + + union ata_descriptor_entry descriptor_entrys[19]; /* bytes 4-497 */ + + u8 vendor_specific[2]; /* byte 498-499 */ + u8 reserved1[11]; /* byte 500-510 */ + u8 data_structure_checksum; /* byte 511 */ + +}; + +/** + * struct ata_extended_smart_self_test_log - The following structure depicts + * the ATA-8 version of the SMART self test log page. + * + * + */ +struct ata_smart_self_test_log { + u8 self_test_log_data_structure_revision_number[2]; /* bytes 0-1 */ + + union ata_smart_descriptor_entry descriptor_entrys[21]; /* bytes 2-505 */ + + u8 vendor_specific[2]; /* byte 506-507 */ + u8 self_test_index; /* byte 508 */ + u8 reserved1[2]; /* byte 509-510 */ + u8 data_structure_checksum; /* byte 511 */ + +}; + +#endif /* _ATA_H_ */ + diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h new file mode 100644 index 0000000..eb9686e --- /dev/null +++ b/drivers/scsi/isci/core/intel_sas.h @@ -0,0 +1,948 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _INTEL_SAS_H_ +#define _INTEL_SAS_H_ + +/** + * This file contains all of the definitions relating to structures, constants, + * etc. defined by the SAS specification. + * + * + */ + +#include "intel_sata.h" +#include "intel_scsi.h" + +/** + * struct sci_sas_address - This structure depicts how a SAS address is + * represented by SCI. + * + * + */ +struct sci_sas_address { + /** + * This member contains the higher 32-bits of the SAS address. + */ + u32 high; + + /** + * This member contains the lower 32-bits of the SAS address. + */ + u32 low; + +}; + +/** + * struct sci_sas_identify_address_frame_protocols - This structure depicts the + * contents of bytes 2 and 3 in the SAS IDENTIFY ADDRESS FRAME (IAF). + * + * For specific information on each of these individual fields please reference + * the SAS specification Link layer section on address frames. + */ +struct sci_sas_identify_address_frame_protocols { + union { + struct { + u16 restricted1:1; + u16 smp_initiator:1; + u16 stp_initiator:1; + u16 ssp_initiator:1; + u16 reserved3:4; + u16 restricted2:1; + u16 smp_target:1; + u16 stp_target:1; + u16 ssp_target:1; + u16 reserved4:4; + } bits; + + u16 all; + } u; + +}; + +/** + * struct sci_sas_identify_address_frame - This structure depicts the contents + * of the SAS IDENTIFY ADDRESS FRAME (IAF). + * + * For specific information on each of these individual fields please reference + * the SAS specification Link layer section on address frames. + */ +struct sci_sas_identify_address_frame { + u16 address_frame_type:4; + u16 device_type:3; + u16 reserved1:1; + u16 reason:4; + u16 reserved2:4; + + struct sci_sas_identify_address_frame_protocols protocols; + + struct sci_sas_address device_name; + struct sci_sas_address sas_address; + + u32 phy_identifier:8; + u32 break_reply_capable:1; + u32 requested_in_zpsds:1; + u32 in_zpsds_persistent:1; + u32 reserved5:21; + + u32 reserved6[4]; + +}; + +/** + * struct sas_capabilities - This structure depicts the various SAS + * capabilities supported by the directly attached target device. For + * specific information on each of these individual fields please reference + * the SAS specification Phy layer section on speed negotiation windows. + * + * + */ +struct sas_capabilities { + union { +#if defined (SCIC_SDS_4_ENABLED) + struct { + /** + * The SAS specification indicates the start bit shall always be set to + * 1. This implementation will have the start bit set to 0 if the + * PHY CAPABILITIES were either not received or speed negotiation failed. + */ + u32 start:1; + u32 tx_ssc_type:1; + u32 reserved1:2; + u32 requested_logical_link_rate:4; + + u32 gen1_without_ssc_supported:1; + u32 gen1_with_ssc_supported:1; + u32 gen2_without_ssc_supported:1; + u32 gen2_with_ssc_supported:1; + u32 gen3_without_ssc_supported:1; + u32 gen3_with_ssc_supported:1; + u32 reserved2:17; + u32 parity:1; + } bits; +#endif /* (SCIC_SDS_4_ENABLED) */ + + u32 all; + } u; + +}; + +/** + * enum _SCI_SAS_LINK_RATE - This enumeration depicts the SAS specification + * defined link speeds. + * + * + */ +enum sci_sas_link_rate { + SCI_SAS_NO_LINK_RATE = 0, + SCI_SATA_SPINUP_HOLD = 0x3, + SCI_SAS_150_GB = 0x8, + SCI_SAS_300_GB = 0x9, + SCI_SAS_600_GB = 0xA +}; + +/** + * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS + * specification defined task attribute values for a command information + * unit. + * + * + */ +enum sci_sas_task_attribute { + SCI_SAS_SIMPLE_ATTRIBUTE = 0, + SCI_SAS_HEAD_OF_QUEUE_ATTRIBUTE = 1, + SCI_SAS_ORDERED_ATTRIBUTE = 2, + SCI_SAS_ACA_ATTRIBUTE = 4, +}; + +/** + * enum _SCI_SAS_TASK_MGMT_FUNCTION - This enumeration depicts the SAM/SAS + * specification defined task management functions. + * + * This HARD_RESET function listed here is not actually defined as a task + * management function in the industry standard. + */ +enum sci_sas_task_mgmt_function { + SCI_SAS_ABORT_TASK = SCSI_TASK_REQUEST_ABORT_TASK, + SCI_SAS_ABORT_TASK_SET = SCSI_TASK_REQUEST_ABORT_TASK_SET, + SCI_SAS_CLEAR_TASK_SET = SCSI_TASK_REQUEST_CLEAR_TASK_SET, + SCI_SAS_LOGICAL_UNIT_RESET = SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET, + SCI_SAS_I_T_NEXUS_RESET = SCSI_TASK_REQUEST_I_T_NEXUS_RESET, + SCI_SAS_CLEAR_ACA = SCSI_TASK_REQUEST_CLEAR_ACA, + SCI_SAS_QUERY_TASK = SCSI_TASK_REQUEST_QUERY_TASK, + SCI_SAS_QUERY_TASK_SET = SCSI_TASK_REQUEST_QUERY_TASK_SET, + SCI_SAS_QUERY_ASYNCHRONOUS_EVENT = SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION, + SCI_SAS_HARD_RESET = 0xFF +}; + + +/** + * enum _SCI_SAS_FRAME_TYPE - This enumeration depicts the SAS specification + * defined SSP frame types. + * + * + */ +enum sci_sas_frame_type { + SCI_SAS_DATA_FRAME = 0x01, + SCI_SAS_XFER_RDY_FRAME = 0x05, + SCI_SAS_COMMAND_FRAME = 0x06, + SCI_SAS_RESPONSE_FRAME = 0x07, + SCI_SAS_TASK_FRAME = 0x16 +}; + +/** + * struct sci_ssp_command_iu - This structure depicts the contents of the SSP + * COMMAND INFORMATION UNIT. For specific information on each of these + * individual fields please reference the SAS specification SSP transport + * layer section. + * + * + */ +struct sci_ssp_command_iu { + u32 lun_upper; + u32 lun_lower; + + u32 additional_cdb_length:6; + u32 reserved0:2; + u32 reserved1:8; + u32 enable_first_burst:1; + u32 task_priority:4; + u32 task_attribute:3; + u32 reserved2:8; + + u32 cdb[4]; + +}; + +/** + * struct sci_ssp_task_iu - This structure depicts the contents of the SSP TASK + * INFORMATION UNIT. For specific information on each of these individual + * fields please reference the SAS specification SSP transport layer section. + * + * + */ +struct sci_ssp_task_iu { + u32 lun_upper; + u32 lun_lower; + + u32 reserved0:8; + u32 task_function:8; + u32 reserved1:8; + u32 reserved2:8; + + u32 reserved3:16; + u32 task_tag:16; + + u32 reserved4[3]; + +}; + +#define SSP_RESPONSE_IU_MAX_DATA 64 + +#define SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK (0x03) + + +#define sci_ssp_get_sense_data_length(sense_data_length_buffer) \ + SCIC_BUILD_DWORD(sense_data_length_buffer) + +#define sci_ssp_get_response_data_length(response_data_length_buffer) \ + SCIC_BUILD_DWORD(response_data_length_buffer) + +/** + * struct sci_ssp_response_iu - This structure depicts the contents of the SSP + * RESPONSE INFORMATION UNIT. For specific information on each of these + * individual fields please reference the SAS specification SSP transport + * layer section. + * + * + */ +struct sci_ssp_response_iu { + u8 reserved0[8]; + + u8 retry_delay_timer[2]; + u8 data_present; + u8 status; + + u8 reserved1[4]; + u8 sense_data_length[4]; + u8 response_data_length[4]; + + u32 data[SSP_RESPONSE_IU_MAX_DATA]; + +}; + +/** + * enum _SCI_SAS_DATA_PRESENT_TYPE - This enumeration depicts the SAS + * specification defined SSP data present types in struct sci_ssp_response_iu. + * + * + */ +enum sci_ssp_response_iu_data_present_type { + SCI_SSP_RESPONSE_IU_NO_DATA = 0x00, + SCI_SSP_RESPONSE_IU_RESPONSE_DATA = 0x01, + SCI_SSP_RESPONSE_IU_SENSE_DATA = 0x02 +}; + +/** + * struct sci_ssp_frame_header - This structure depicts the contents of an SSP + * frame header. For specific information on the individual fields please + * reference the SAS specification transport layer SSP frame format. + * + * + */ +struct sci_ssp_frame_header { + /* Word 0 */ + u32 hashed_destination_address:24; + u32 frame_type:8; + + /* Word 1 */ + u32 hashed_source_address:24; + u32 reserved1_0:8; + + /* Word 2 */ + u32 reserved2_2:6; + u32 fill_bytes:2; + u32 reserved2_1:3; + u32 tlr_control:2; + u32 retry_data_frames:1; + u32 retransmit:1; + u32 changing_data_pointer:1; + u32 reserved2_0:16; + + /* Word 3 */ + u32 uiResv4; + + /* Word 4 */ + u16 target_port_transfer_tag; + u16 tag; + + /* Word 5 */ + u32 data_offset; + +}; + +/** + * struct smp_request_header - This structure defines the contents of an SMP + * Request header. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_request_header { + u8 smp_frame_type; /* byte 0 */ + u8 function; /* byte 1 */ + u8 allocated_response_length; /* byte 2 */ + u8 request_length; /* byte 3 */ +}; + +/** + * struct smp_response_header - This structure depicts the contents of the SAS + * SMP DISCOVER RESPONSE frame. For specific information on each of these + * individual fields please reference the SAS specification Link layer + * section on address frames. + * + * + */ +struct smp_response_header { + u8 smp_frame_type; /* byte 0 */ + u8 function; /* byte 1 */ + u8 function_result; /* byte 2 */ + u8 response_length; /* byte 3 */ +}; + +/** + * struct smp_request_general - This structure defines the contents of an SMP + * Request that is comprised of the struct smp_request_header and a CRC. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_request_general { + u32 crc; /* bytes 4-7 */ + +}; + +/** + * struct smp_request_phy_identifier - This structure defines the contents of + * an SMP Request that is comprised of the struct smp_request_header and a phy + * identifier. Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_request_phy_identifier { + u32 reserved_byte4_7; /* bytes 4-7 */ + + u32 ignore_zone_group:1; /* byte 8 */ + u32 reserved_byte8:7; + + u32 phy_identifier:8; /* byte 9 */ + u32 reserved_byte10:8; /* byte 10 */ + u32 reserved_byte11:8; /* byte 11 */ + +}; + +/** + * struct smp_request_configure_route_information - This structure defines the + * contents of an SMP Configure Route Information request. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_request_configure_route_information { + u32 expected_expander_change_count:16; /* bytes 4-5 */ + u32 expander_route_index_high:8; + u32 expander_route_index:8; /* bytes 6-7 */ + + u32 reserved_byte8:8; /* bytes 8 */ + u32 phy_identifier:8; /* bytes 9 */ + u32 reserved_byte_10_11:16; /* bytes 10-11 */ + + u32 reserved_byte_12_bit_0_6:7; + u32 disable_route_entry:1; /* byte 12 */ + u32 reserved_byte_13_15:24; /* bytes 13-15 */ + + u32 routed_sas_address[2]; /* bytes 16-23 */ + u8 reserved_byte_24_39[16]; /* bytes 24-39 */ + +}; + +/** + * struct smp_request_phy_control - This structure defines the contents of an + * SMP Phy Controler request. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_request_phy_control { + u16 expected_expander_change_count; /* byte 4-5 */ + + u16 reserved_byte_6_7; /* byte 6-7 */ + u8 reserved_byte_8; /* byte 8 */ + + u8 phy_identifier; /* byte 9 */ + u8 phy_operation; /* byte 10 */ + + u8 update_partial_pathway_timeout_value:1; + u8 reserved_byte_11_bit_1_7:7; /* byte 11 */ + + u8 reserved_byte_12_23[12]; /* byte 12-23 */ + + u8 attached_device_name[8]; /* byte 24-31 */ + + u8 reserved_byte_32_bit_3_0:4; /* byte 32 */ + u8 programmed_minimum_physical_link_rate:4; + + u8 reserved_byte_33_bit_3_0:4; /* byte 33 */ + u8 programmed_maximum_physical_link_rate:4; + + u16 reserved_byte_34_35; /* byte 34-35 */ + + u8 partial_pathway_timeout_value:4; + u8 reserved_byte_36_bit_4_7:4; /* byte 36 */ + + u16 reserved_byte_37_38; /* byte 37-38 */ + u8 reserved_byte_39; /* byte 39 */ + +}; + +/** + * struct smp_request_vendor_specific - This structure depicts the vendor + * specific space for SMP request. + * + * + */ + #define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016 +struct smp_request_vendor_specific { + u8 request_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH]; +}; + +/** + * struct smp_request - This structure simply unionizes the existing request + * structures into a common request type. + * + * + */ +struct smp_request { + struct smp_request_header header; + + union { /* bytes 4-N */ + struct smp_request_general report_general; + struct smp_request_phy_identifier discover; + struct smp_request_general report_manufacturer_information; + struct smp_request_phy_identifier report_phy_sata; + struct smp_request_phy_control phy_control; + struct smp_request_phy_identifier report_phy_error_log; + struct smp_request_phy_identifier report_route_information; + struct smp_request_configure_route_information configure_route_information; + struct smp_request_vendor_specific vendor_specific_request; + } request; + +}; + + +/** + * struct smp_response_report_general - This structure depicts the SMP Report + * General for expander devices. It adheres to the SAS-2.1 specification. + * + * For specific information on each of these individual fields please reference + * the SAS specification Application layer section on SMP. + */ +struct smp_response_report_general { + u16 expander_change_count; /* byte 4-5 */ + u16 expander_route_indexes; /* byte 6-7 */ + + u32 reserved_byte8:7; /* byte 8 bit 0-6 */ + u32 long_response:1; /* byte 8 bit 7 */ + + u32 number_of_phys:8; /* byte 9 */ + + u32 configurable_route_table:1; /* byte 10 */ + u32 configuring:1; + u32 configures_others:1; + u32 open_reject_retry_supported:1; + u32 stp_continue_awt:1; + u32 self_configuring:1; + u32 zone_configuring:1; + u32 table_to_table_supported:1; + + u32 reserved_byte11:8; /* byte 11 */ + + u32 enclosure_logical_identifier_high; /* byte 12-15 */ + u32 enclosure_logical_identifier_low; /* byte 16-19 */ + + u32 reserved_byte20_23; + u32 reserved_byte24_27; + +}; + +struct smp_response_report_general_long { + struct smp_response_report_general sas1_1; + + struct { + u16 reserved1; + u16 stp_bus_inactivity_time_limit; + u16 stp_max_connect_time_limit; + u16 stp_smp_i_t_nexus_loss_time; + + u32 zoning_enabled:1; + u32 zoning_supported:1; + u32 physicaL_presence_asserted:1; + u32 zone_locked:1; + u32 reserved2:1; + u32 num_zone_groups:3; + u32 saving_zoning_enabled_supported:3; + u32 saving_zone_perms_table_supported:1; + u32 saving_zone_phy_info_supported:1; + u32 saving_zone_manager_password_supported:1; + u32 saving:1; + u32 reserved3:1; + u32 max_number_routed_sas_addresses:16; + + struct sci_sas_address active_zone_manager_sas_address; + + u16 zone_lock_inactivity_time_limit; + u16 reserved4; + + u8 reserved5; + u8 first_enclosure_connector_element_index; + u8 number_of_enclosure_connector_element_indices; + u8 reserved6; + + u32 reserved7:7; + u32 reduced_functionality:1; + u32 time_to_reduce_functionality:8; + u32 initial_time_to_reduce_functionality:8; + u8 max_reduced_functionality_time; + + u16 last_self_config_status_descriptor_index; + u16 max_number_of_stored_self_config_status_descriptors; + + u16 last_phy_event_list_descriptor_index; + u16 max_number_of_stored_phy_event_list_descriptors; + } sas2; + +}; + +/** + * struct smp_response_report_manufacturer_information - This structure depicts + * the SMP report manufacturer information for expander devices. It adheres + * to the SAS-2.1 specification. + * + * For specific information on each of these individual fields please reference + * the SAS specification Application layer section on SMP. + */ +struct smp_response_report_manufacturer_information { + u32 expander_change_count:16; /* bytes 4-5 */ + u32 reserved1:16; + + u32 sas1_1_format:1; + u32 reserved2:31; + + u8 vendor_id[8]; + u8 product_id[16]; + u8 product_revision_level[4]; + u8 component_vendor_id[8]; + u8 component_id[2]; + u8 component_revision_level; + u8 reserved3; + u8 vendor_specific[8]; + +}; + +#define SMP_RESPONSE_DISCOVER_FORMAT_1_1_SIZE 52 +#define SMP_RESPONSE_DISCOVER_FORMAT_2_SIZE 116 + +/** + * struct smp_discover_response_protocols - This structure depicts the discover + * response where the supported protocols by the remote phy are specified. + * + * For specific information on each of these individual fields please reference + * the SAS specification Link layer section on address frames. + */ +struct smp_discover_response_protocols { + union { + struct { + u16 attached_sata_host:1; + u16 attached_smp_initiator:1; + u16 attached_stp_initiator:1; + u16 attached_ssp_initiator:1; + u16 reserved3:4; + u16 attached_sata_device:1; + u16 attached_smp_target:1; + u16 attached_stp_target:1; + u16 attached_ssp_target:1; + u16 reserved4:3; + u16 attached_sata_port_selector:1; + } bits; + + u16 all; + } u; + +}; + +/** + * struct SMP_RESPONSE_DISCOVER_FORMAT - This structure defines the SMP phy + * discover response format. It handles both SAS1.1 and SAS 2 definitions. + * The unions indicate locations where the SAS specification versions differ + * from one another. + * + * + */ +struct smp_response_discover { + + union { + struct { + u8 reserved[2]; + } sas1_1; + + struct { + u16 expander_change_count; + } sas2; + + } u1; + + u8 reserved1[3]; + u8 phy_identifier; + u8 reserved2[2]; + + union { + struct { + u16 reserved1:4; + u16 attached_device_type:3; + u16 reserved2:1; + u16 negotiated_physical_link_rate:4; + u16 reserved3:4; + } sas1_1; + + struct { + u16 attached_reason:4; + u16 attached_device_type:3; + u16 reserved2:1; + u16 negotiated_logical_link_rate:4; + u16 reserved3:4; + } sas2; + + } u2; + + struct smp_discover_response_protocols protocols; + struct sci_sas_address sas_address; + struct sci_sas_address attached_sas_address; + + u8 attached_phy_identifier; + + union { + struct { + u8 reserved; + } sas1_1; + + struct { + u8 attached_break_reply_capable:1; + u8 attached_requested_inside_zpsds:1; + u8 attached_inside_zpsds_persistent:1; + u8 reserved1:5; + } sas2; + + } u3; + + u8 reserved_for_identify[6]; + + u32 hardware_min_physical_link_rate:4; + u32 programmed_min_physical_link_rate:4; + u32 hardware_max_physical_link_rate:4; + u32 programmed_max_physical_link_rate:4; + u32 phy_change_count:8; + u32 partial_pathway_timeout_value:4; + u32 reserved5:3; + u32 virtual_phy:1; + + u32 routing_attribute:4; + u32 reserved6:4; + u32 connector_type:7; + u32 reserved7:1; + u32 connector_element_index:8; + u32 connector_physical_link:8; + + u16 reserved8; + u16 vendor_specific; + + union { + struct { + /** + * In the SAS 1.1 specification this structure ends after 52 bytes. + * As a result, the contents of this field should never have a + * real value. It is undefined. + */ + u8 undefined[SMP_RESPONSE_DISCOVER_FORMAT_2_SIZE + - SMP_RESPONSE_DISCOVER_FORMAT_1_1_SIZE]; + } sas1_1; + + struct { + struct sci_sas_address attached_device_name; + + u32 zoning_enabled:1; + u32 inside_zpsds:1; + u32 zone_group_persistent:1; + u32 reserved1:1; + u32 requested_inside_zpsds:1; + u32 inside_zpsds_persistent:1; + u32 requested_inside_zpsds_changed_by_expander:1; + u32 reserved2:1; + u32 reserved_for_zoning_fields:16; + u32 zone_group:8; + + u8 self_configuration_status; + u8 self_configuration_levels_completed; + u16 reserved_for_self_config_fields; + + struct sci_sas_address self_configuration_sas_address; + + u32 programmed_phy_capabilities; + u32 current_phy_capabilities; + u32 attached_phy_capabilities; + + u32 reserved3; + + u32 reserved4:16; + u32 negotiated_physical_link_rate:4; + u32 reason:4; + u32 hardware_muxing_supported:1; + u32 negotiated_ssc:1; + u32 reserved5:6; + + u32 default_zoning_enabled:1; + u32 reserved6:1; + u32 default_zone_group_persistent:1; + u32 reserved7:1; + u32 default_requested_inside_zpsds:1; + u32 default_inside_zpsds_persistent:1; + u32 reserved8:2; + u32 reserved9:16; + u32 default_zone_group:8; + + u32 saved_zoning_enabled:1; + u32 reserved10:1; + u32 saved_zone_group_persistent:1; + u32 reserved11:1; + u32 saved_requested_inside_zpsds:1; + u32 saved_inside_zpsds_persistent:1; + u32 reserved12:18; + u32 saved_zone_group:8; + + u32 reserved14:2; + u32 shadow_zone_group_persistent:1; + u32 reserved15:1; + u32 shadow_requested_inside_zpsds:1; + u32 shadow_inside_zpsds_persistent:1; + u32 reserved16:18; + u32 shadow_zone_group:8; + + u8 device_slot_number; + u8 device_slot_group_number; + u8 device_slot_group_output_connector[6]; + } sas2; + + } u4; + +}; + +/** + * struct smp_response_report_phy_sata - This structure depicts the contents of + * the SAS SMP REPORT PHY SATA frame. For specific information on each of + * these individual fields please reference the SAS specification Link layer + * section on address frames. + * + * + */ +struct smp_response_report_phy_sata { + u32 ignored_byte_4_7; /* bytes 4-7 */ + + u32 affiliations_valid:1; + u32 affiliations_supported:1; + u32 reserved_byte11:6; /* byte 11 */ + u32 ignored_byte10:8; /* byte 10 */ + u32 phy_identifier:8; /* byte 9 */ + u32 reserved_byte_8:8; /* byte 8 */ + + u32 reserved_12_15; + u32 stp_sas_address[2]; + u8 device_to_host_fis[20]; + u32 reserved_44_47; + u32 affiliated_stp_initiator_sas_address[2]; + +}; + +struct smp_response_vendor_specific { + u8 response_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH]; +}; + +union smp_response_body { + struct smp_response_report_general report_general; + struct smp_response_report_manufacturer_information report_manufacturer_information; + struct smp_response_discover discover; + struct smp_response_report_phy_sata report_phy_sata; + struct smp_response_vendor_specific vendor_specific_response; +}; + +/** + * struct smp_response - This structure simply unionizes the existing response + * structures into a common response type. + * + * + */ +struct smp_response { + struct smp_response_header header; + + union smp_response_body response; + +}; + +/* SMP Request Functions */ +#define SMP_FUNCTION_REPORT_GENERAL 0x00 +#define SMP_FUNCTION_REPORT_MANUFACTURER_INFORMATION 0x01 +#define SMP_FUNCTION_DISCOVER 0x10 +#define SMP_FUNCTION_REPORT_PHY_ERROR_LOG 0x11 +#define SMP_FUNCTION_REPORT_PHY_SATA 0x12 +#define SMP_FUNCTION_REPORT_ROUTE_INFORMATION 0X13 +#define SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION 0X90 +#define SMP_FUNCTION_PHY_CONTROL 0x91 +#define SMP_FUNCTION_PHY_TEST 0x92 + +#define SMP_FRAME_TYPE_REQUEST 0x40 +#define SMP_FRAME_TYPE_RESPONSE 0x41 + +#define PHY_OPERATION_NOP 0x00 +#define PHY_OPERATION_LINK_RESET 0x01 +#define PHY_OPERATION_HARD_RESET 0x02 +#define PHY_OPERATION_DISABLE 0x03 +#define PHY_OPERATION_CLEAR_ERROR_LOG 0x05 +#define PHY_OPERATION_CLEAR_AFFILIATION 0x06 + +#define NPLR_PHY_ENABLED_UNK_LINK_RATE 0x00 +#define NPLR_PHY_DISABLED 0x01 +#define NPLR_PHY_ENABLED_SPD_NEG_FAILED 0x02 +#define NPLR_PHY_ENABLED_SATA_HOLD 0x03 +#define NPLR_PHY_ENABLED_1_5G 0x08 +#define NPLR_PHY_ENABLED_3_0G 0x09 + +/* SMP Function Result values. */ +#define SMP_RESULT_FUNCTION_ACCEPTED 0x00 +#define SMP_RESULT_UNKNOWN_FUNCTION 0x01 +#define SMP_RESULT_FUNCTION_FAILED 0x02 +#define SMP_RESULT_INVALID_REQUEST_FRAME_LEN 0x03 +#define SMP_RESULT_INAVALID_EXPANDER_CHANGE_COUNT 0x04 +#define SMP_RESULT_BUSY 0x05 +#define SMP_RESULT_INCOMPLETE_DESCRIPTOR_LIST 0x06 +#define SMP_RESULT_PHY_DOES_NOT_EXIST 0x10 +#define SMP_RESULT_INDEX_DOES_NOT_EXIST 0x11 +#define SMP_RESULT_PHY_DOES_NOT_SUPPORT_SATA 0x12 +#define SMP_RESULT_UNKNOWN_PHY_OPERATION 0x13 +#define SMP_RESULT_UNKNOWN_PHY_TEST_FUNCTION 0x14 +#define SMP_RESULT_PHY_TEST_IN_PROGRESS 0x15 +#define SMP_RESULT_PHY_VACANT 0x16 + +/* Attached Device Types */ +#define SMP_NO_DEVICE_ATTACHED 0 +#define SMP_END_DEVICE_ONLY 1 +#define SMP_EDGE_EXPANDER_DEVICE 2 +#define SMP_FANOUT_EXPANDER_DEVICE 3 + +/* Expander phy routine attribute */ +#define DIRECT_ROUTING_ATTRIBUTE 0 +#define SUBTRACTIVE_ROUTING_ATTRIBUTE 1 +#define TABLE_ROUTING_ATTRIBUTE 2 + +#endif /* _INTEL_SAS_H_ */ + diff --git a/drivers/scsi/isci/core/intel_sat.h b/drivers/scsi/isci/core/intel_sat.h new file mode 100644 index 0000000..c4d78ed --- /dev/null +++ b/drivers/scsi/isci/core/intel_sat.h @@ -0,0 +1,95 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SAT_H_ +#define _SAT_H_ + +/** + * This file contains constants and constructs defined in the SCSI to ATA + * Translation (SAT) T10 standard. For more information please refer to + * www.t10.org. + * + * + */ + +/** + * + * + * SAT_PROTOCOLS These constants indicate the various protocol values that can + * be supported in a SAT translator. + */ +#define SAT_PROTOCOL_ATA_HARD_RESET 0 +#define SAT_PROTOCOL_SOFT_RESET 1 +#define SAT_PROTOCOL_NON_DATA 3 +#define SAT_PROTOCOL_PIO_DATA_IN 4 +#define SAT_PROTOCOL_PIO_DATA_OUT 5 +#define SAT_PROTOCOL_DMA 6 +#define SAT_PROTOCOL_DMA_QUEUED 7 +#define SAT_PROTOCOL_DEVICE_DIAGNOSTIC 8 +#define SAT_PROTOCOL_DEVICE_RESET 9 +#define SAT_PROTOCOL_UDMA_DATA_IN 10 +#define SAT_PROTOCOL_UDMA_DATA_OUT 11 +#define SAT_PROTOCOL_FPDMA 12 +#define SAT_PROTOCOL_RETURN_RESPONSE_INFO 15 + +#define SAT_PROTOCOL_PACKET 0x10 +#define SAT_PROTOCOL_PACKET_NON_DATA (SAT_PROTOCOL_PACKET | 0x0) +#define SAT_PROTOCOL_PACKET_DMA_DATA_IN (SAT_PROTOCOL_PACKET | 0x1) +#define SAT_PROTOCOL_PACKET_DMA_DATA_OUT (SAT_PROTOCOL_PACKET | 0x2) +#define SAT_PROTOCOL_PACKET_PIO_DATA_IN (SAT_PROTOCOL_PACKET | 0x3) +#define SAT_PROTOCOL_PACKET_PIO_DATA_OUT (SAT_PROTOCOL_PACKET | 0x4) + +#endif /* _SAT_H_ */ + diff --git a/drivers/scsi/isci/core/intel_sata.h b/drivers/scsi/isci/core/intel_sata.h new file mode 100644 index 0000000..47390d5 --- /dev/null +++ b/drivers/scsi/isci/core/intel_sata.h @@ -0,0 +1,280 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SATA_H_ +#define _SATA_H_ + +#include + +/** + * This file defines all of the SATA releated constants, enumerations, and + * types. Please note that this file does not necessarily contain an + * exhaustive list of all contants and commands. + * + * + */ + +/** + * + * + * SATA FIS Types These constants depict the various SATA FIS types devined in + * the serial ATA specification. + */ +#define SATA_FIS_TYPE_REGH2D 0x27 +#define SATA_FIS_TYPE_REGD2H 0x34 +#define SATA_FIS_TYPE_SETDEVBITS 0xA1 +#define SATA_FIS_TYPE_DMA_ACTIVATE 0x39 +#define SATA_FIS_TYPE_DMA_SETUP 0x41 +#define SATA_FIS_TYPE_BIST_ACTIVATE 0x58 +#define SATA_FIS_TYPE_PIO_SETUP 0x5F +#define SATA_FIS_TYPE_DATA 0x46 + +#define SATA_REGISTER_FIS_SIZE 0x20 + +/** + * struct sata_fis_header - This is the common definition for a SATA FIS Header + * word. A different header word is defined for any FIS type that does not + * use the standard header. + * + * + */ +struct sata_fis_header { + u32 fis_type:8; /* word 0 */ + u32 pm_port:4; + u32 reserved:1; + u32 direction_flag:1; /* direction */ + u32 interrupt_flag:1; + u32 command_flag:1; /* command, auto_activate, or notification */ + u32 status:8; + u32 error:8; +}; + + +/** + * struct sata_fis_reg_h2d - This is the definition for a SATA Host to Device + * Register FIS. + * + * + */ +struct sata_fis_reg_h2d { + u32 fis_type:8; /* word 0 */ + u32 pm_port:4; + u32 reserved0:3; + u32 command_flag:1; + u32 command:8; + u32 features:8; + u32 lba_low:8; /* word 1 */ + u32 lba_mid:8; + u32 lba_high:8; + u32 device:8; + u32 lba_low_exp:8; /* word 2 */ + u32 lba_mid_exp:8; + u32 lba_high_exp:8; + u32 features_exp:8; + u32 sector_count:8; /* word 3 */ + u32 sector_count_exp:8; + u32 reserved1:8; + u32 control:8; + u32 reserved2; /* word 4 */ +}; + +/** + * struct sata_fis_reg_d2h - SATA Device To Host FIS + * + * + */ +struct sata_fis_reg_d2h { + u32 fis_type:8; /* word 0 */ + u32 pm_port:4; + u32 reserved0:2; + u32 irq:1; + u32 reserved1:1; + u32 status:8; + u32 error:8; + u8 lba_low; /* word 1 */ + u8 lba_mid; + u8 lba_high; + u8 device; + u8 lba_low_exp; /* word 2 */ + u8 lba_mid_exp; + u8 lba_high_exp; + u8 reserved; + u8 sector_count; /* word 3 */ + u8 sector_count_exp; + u16 reserved2; + u32 reserved3; +}; + +/** + * + * + * Status field bit definitions + */ +#define SATA_FIS_STATUS_DEVBITS_MASK (0x77) + +/** + * struct sata_fis_set_dev_bits - SATA Set Device Bits FIS + * + * + */ +struct sata_fis_set_dev_bits { + u32 fis_type:8; /* word 0 */ + u32 pm_port:4; + u32 reserved0:2; + u32 irq:1; + u32 notification:1; + u32 status_low:4; + u32 status_high:4; + u32 error:8; + u32 s_active; /* word 1 */ +}; + +/** + * struct sata_fis_dma_activate - SATA DMA Activate FIS + * + * + */ +struct sata_fis_dma_activate { + u32 fis_type:8; /* word 0 */ + u32 pm_port:4; + u32 reserved0:24; +}; + +/** + * + * + * The lower 5 bits in the DMA Buffer ID Low field of the DMA Setup are used to + * communicate the command tag. + */ +#define SATA_DMA_SETUP_TAG_ENABLE 0x1F + +#define SATA_DMA_SETUP_AUTO_ACT_ENABLE 0x80 + +/** + * struct sata_fis_dma_setup - SATA DMA Setup FIS + * + * + */ +struct sata_fis_dma_setup { + u32 fis_type:8; /* word 0 */ + u32 pm_port:4; + u32 reserved_00:1; + u32 direction:1; + u32 irq:1; + u32 auto_activate:1; + u32 reserved_01:16; + u32 dma_buffer_id_low; /* word 1 */ + u32 dma_buffer_id_high; /* word 2 */ + u32 reserved0; /* word 3 */ + u32 dma_buffer_offset; /* word 4 */ + u32 dma_transfer_count; /* word 5 */ + u32 reserved1; /* word 6 */ +}; + +/** + * struct sata_fis_bist_activate - SATA BIST Activate FIS + * + * + */ +struct sata_fis_bist_activate { + u32 fis_type:8; /* word 0 */ + u32 reserved0:8; + u32 pattern_definition:8; + u32 reserved1:8; + u32 data1; /* word 1 */ + u32 data2; /* word 1 */ +}; + +/* + * SATA PIO Setup FIS + */ +struct sata_fis_pio_setup { + u32 fis_type:8; /* word 0 */ + u32 pm_port:4; + u32 reserved_00:1; + u32 direction:1; + u32 irq:1; + u32 reserved_01:1; + u32 status:8; + u32 error:8; + u32 lba_low:8; /* word 1 */ + u32 lba_mid:8; + u32 lba_high:8; + u32 device:8; + u32 lba_low_exp:8; /* word 2 */ + u32 lba_mid_exp:8; + u32 lba_high_exp:8; + u32 reserved:8; + u32 sector_count:8; /* word 3 */ + u32 sector_count_exp:8; + u32 reserved1:8; + u32 ending_status:8; + u32 transfter_count:16; /* word 4 */ + u32 reserved3:16; +}; + +/** + * struct sata_fis_data - SATA Data FIS + * + * + */ +struct sata_fis_data { + u32 fis_type:8; /* word 0 */ + u32 pm_port:4; + u32 reserved0:24; + u8 data[4]; /* word 1 */ +}; + +#endif /* _SATA_H_ */ diff --git a/drivers/scsi/isci/core/intel_scsi.h b/drivers/scsi/isci/core/intel_scsi.h new file mode 100644 index 0000000..1e45d3c --- /dev/null +++ b/drivers/scsi/isci/core/intel_scsi.h @@ -0,0 +1,474 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file defines all of the SCSI related constants, enumerations, and + * types. Please note that this file does not necessarily contain an + * exhaustive list of all constants, commands, sub-commands, etc. + * + * + */ + +#ifndef _SCSI_H__ +#define _SCSI_H__ + + +/* + * ****************************************************************************** + * * C O N S T A N T S A N D M A C R O S + * ****************************************************************************** */ + +/** + * enum _SCSI_TASK_MGMT_REQUEST_CODES - This enumberation contains the + * constants to be used for SCSI task management request codes. SAM does + * not specify any particular values for these codes so constants used here + * are the same as those specified in SAS. + * + * + */ +enum scsi_task_mgmt_request_codes { + SCSI_TASK_REQUEST_ABORT_TASK = 0x01, + SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02, + SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04, + SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08, + SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10, + SCSI_TASK_REQUEST_CLEAR_ACA = 0x40, + SCSI_TASK_REQUEST_QUERY_TASK = 0x80, + SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81, + SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82, + +}; + +/** + * enum _SCSI_TASK_MGMT_RESPONSE_CODES - This enumeration contains all of the + * SCSI task management response codes. + * + * + */ +enum scsi_task_mgmt_response_codes { + SCSI_TASK_MGMT_FUNC_COMPLETE = 0, + SCSI_INVALID_FRAME = 2, + SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4, + SCSI_TASK_MGMT_FUNC_FAILED = 5, + SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8, + SCSI_INVALID_LUN = 9 +}; + +/** + * enum _SCSI_SENSE_RESPONSE_CODE - this enumeration depicts the types of sense + * data responses as per SPC-3. + * + * + */ +enum scsi_sense_response_code { + SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70, + SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71, + SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72, + SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73 + +}; + +/* + * This constant represents the valid bit located in byte 0 of a FIXED + * format sense data. */ +#define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80 + +#define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18 + +/* This value is used in the DATAPRES field of the SCSI Response IU. */ +#define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02 + +/** + * + * + * SCSI_SENSE_KEYS These constants delineate all of the SCSI protocol sense key + * constants + */ +#define SCSI_SENSE_NO_SENSE 0x00 +#define SCSI_SENSE_RECOVERED_ERROR 0x01 +#define SCSI_SENSE_NOT_READY 0x02 +#define SCSI_SENSE_MEDIUM_ERROR 0x03 +#define SCSI_SENSE_HARDWARE_ERROR 0x04 +#define SCSI_SENSE_ILLEGAL_REQUEST 0x05 +#define SCSI_SENSE_UNIT_ATTENTION 0x06 +#define SCSI_SENSE_DATA_PROTECT 0x07 +#define SCSI_SENSE_BLANK_CHECK 0x08 +#define SCSI_SENSE_VENDOR_SPECIFIC 0x09 +#define SCSI_SENSE_COPY_ABORTED 0x0A +#define SCSI_SENSE_ABORTED_COMMAND 0x0B +#define SCSI_SENSE_VOLUME_OVERFLOW 0x0D +#define SCSI_SENSE_MISCOMPARE 0x0E + +/** + * + * + * SCSI_ADDITIONAL_SENSE_CODES These constants delineate all of the SCSI + * protocol additional sense code constants. + */ +#define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00 +#define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04 +#define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04 +#define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04 +#define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05 +#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11 +#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20 +#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21 +#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24 +#define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26 +#define SCSI_ASC_WRITE_PROTECTED 0x27 +#define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28 +#define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39 +#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A +#define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44 +#define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47 +#define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A +#define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C +#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53 +#define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D +#define SCSI_ASC_POWER_STATE_CHANGE 0x5E +#define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40 +#define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67 + +/** + * + * + * SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS This enumeration contains all of the + * used SCSI protocol additional sense code qualifier constants. + */ +#define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00 +#define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00 +#define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00 +#define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00 +#define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00 +#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00 +#define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00 +#define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00 +#define SCSI_ASCQ_WRITE_PROTECTED 0x00 +#define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00 +#define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00 +#define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00 +#define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01 +#define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02 +#define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03 +#define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04 +#define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09 +#define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10 +#define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03 +#define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04 +#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42 +#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43 +#define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B +#define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04 + + + +/** + * + * + * SCSI_STATUS_CODES These constants define all of the used SCSI status values. + */ +#define SCSI_STATUS_GOOD 0x00 +#define SCSI_STATUS_CHECK_CONDITION 0x02 +#define SCSI_STATUS_CONDITION_MET 0x04 +#define SCSI_STATUS_BUSY 0x08 +#define SCSI_STATUS_TASKFULL 0x28 +#define SCSI_STATUS_ACA 0x30 +#define SCSI_STATUS_ABORT 0x40 + +/** + * + * + * SCSI_OPERATION_CODES These constants delineate all of the SCSI + * command/operation codes. + */ +#define SCSI_INQUIRY 0x12 +#define SCSI_READ_CAPACITY_10 0x25 +#define SCSI_SERVICE_ACTION_IN_16 0x9E +#define SCSI_TEST_UNIT_READY 0x00 +#define SCSI_START_STOP_UNIT 0x1B +#define SCSI_SYNCHRONIZE_CACHE_10 0x35 +#define SCSI_SYNCHRONIZE_CACHE_16 0x91 +#define SCSI_REQUEST_SENSE 0x03 +#define SCSI_REPORT_LUNS 0xA0 +#define SCSI_REASSIGN_BLOCKS 0x07 +#define SCSI_READ_6 0x08 +#define SCSI_READ_10 0x28 +#define SCSI_READ_12 0xA8 +#define SCSI_READ_16 0x88 +#define SCSI_WRITE_6 0x0A +#define SCSI_WRITE_10 0x2A +#define SCSI_WRITE_12 0xAA +#define SCSI_WRITE_16 0x8A +#define SCSI_VERIFY_10 0x2F +#define SCSI_VERIFY_12 0xAF +#define SCSI_VERIFY_16 0x8F +#define SCSI_SEEK_6 0x01 +#define SCSI_SEEK_10 0x02 +#define SCSI_WRITE_VERIFY 0x2E +#define SCSI_FORMAT_UNIT 0x04 +#define SCSI_READ_BUFFER 0x3C +#define SCSI_WRITE_BUFFER 0x3B +#define SCSI_SEND_DIAGNOSTIC 0x1D +#define SCSI_RECEIVE_DIAGNOSTIC 0x1C +#define SCSI_MODE_SENSE_6 0x1A +#define SCSI_MODE_SENSE_10 0x5A +#define SCSI_MODE_SELECT_6 0x15 +#define SCSI_MODE_SELECT_10 0x55 +#define SCSI_MAINTENANCE_IN 0xA3 +#define SCSI_LOG_SENSE 0x4D +#define SCSI_LOG_SELECT 0x4C +#define SCSI_RESERVE_6 0x16 +#define SCSI_RESERVE_10 0x56 +#define SCSI_RELEASE_6 0x17 +#define SCSI_RELEASE_10 0x57 +#define SCSI_ATA_PASSTHRU_12 0xA1 +#define SCSI_ATA_PASSTHRU_16 0x85 +#define SCSI_WRITE_LONG_10 0x3F +#define SCSI_WRITE_LONG_16 0x9F +#define SCSI_PERSISTENT_RESERVE_IN 0x5E +#define SCSI_PERSISTENT_RESERVE_OUT 0x5F + +/** + * + * + * SCSI_SERVICE_ACTION_IN_CODES Service action in operations. + */ +#define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10 + +#define SCSI_SERVICE_ACTION_MASK 0x1f + +/** + * + * + * SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES MAINTENANCE IN service action codes. + */ +#define SCSI_REPORT_TASK_MGMT 0x0D +#define SCSI_REPORT_OP_CODES 0x0C + +/** + * + * + * SCSI_MODE_PAGE_CONTROLS These constants delineate all of the used SCSI Mode + * Page control values. + */ +#define SCSI_MODE_SENSE_PC_CURRENT 0x0 +#define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1 +#define SCSI_MODE_SENSE_PC_DEFAULT 0x2 +#define SCSI_MODE_SENSE_PC_SAVED 0x3 + +#define SCSI_MODE_SENSE_PC_SHIFT 0x06 +#define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F +#define SCSI_MODE_SENSE_DBD_ENABLE 0x08 +#define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10 + +/** + * + * + * SCSI_MODE_PAGE_CODES These constants delineate all of the used SCSI Mode + * Page codes. + */ +#define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01 +#define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02 +#define SCSI_MODE_PAGE_CACHING 0x08 +#define SCSI_MODE_PAGE_CONTROL 0x0A +#define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19 +#define SCSI_MODE_PAGE_POWER_CONDITION 0x1A +#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C +#define SCSI_MODE_PAGE_ALL_PAGES 0x3F + +#define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF +#define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0 +#define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1 +#define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04 +#define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20 +#define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08 +#define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10 +#define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1 +#define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2 + +#define SCSI_MODE_SENSE_6_HEADER_LENGTH 4 +#define SCSI_MODE_SENSE_10_HEADER_LENGTH 8 +#define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8 +#define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16 + +#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08 +#define SCSI_MODE_PAGE_19_SAS_ID 0x6 +#define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1 +#define SCSI_MODE_PAGE_19_SUB1_PC 0x59 + +#define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00 + +/* Mode Select constrains related masks value */ +#define SCSI_MODE_SELECT_PF_BIT 0x1 +#define SCSI_MODE_SELECT_PF_MASK 0x10 +#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6 +#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F +#define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40 +#define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80 +#define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40 +#define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F +#define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1 +#define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84 +#define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1 +#define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xF0 +#define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38 +#define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47 + + +#define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04 +#define SCSI_MOVE_FUA_BIT_ENABLE 0x08 +#define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01 +#define SCSI_READ_CAPACITY_10_DATA_LENGTH 8 +#define SCSI_READ_CAPACITY_16_DATA_LENGTH 32 + +/* Inquiry constants */ +#define SCSI_INQUIRY_EVPD_ENABLE 0x01 +#define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02 +#define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00 +#define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80 +#define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83 +#define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89 +#define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1 +#define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C +#define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 /* 36 */ + +#define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC /* 252 */ + +/** Defines the log page codes that are use in gathing Smart data + */ +#define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00 +#define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F +#define SCSI_LOG_PAGE_SELF_TEST 0x10 + +/** + * + * + * SCSI_INQUIRY_VPD The following are constants used with vital product data + * inquiry pages. Values are already shifted into the proper nibble location. + */ +#define SCSI_PIV_ENABLE 0x80 +#define SCSI_LUN_ASSOCIATION 0x00 +#define SCSI_TARGET_PORT_ASSOCIATION 0x10 + +#define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00 +#define SCSI_NAA_IDENTIFIER_TYPE 0x03 + +#define SCSI_T10_IDENTIFIER_TYPE 0x01 +#define SCSI_BINARY_CODE_SET 0x01 +#define SCSI_ASCII_CODE_SET 0x02 +#define SCSI_FC_PROTOCOL_IDENTIFIER 0x00 +#define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60 + +#define SCSI_VERIFY_BYTCHK_ENABLED 0x02 + +#define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02 +/** + * + * + * SCSI_START_STOP_UNIT_POWER_CONDITION_CODES The following are SCSI Start Stop + * Unit command Power Condition codes. + */ +#define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB + +#define SCSI_START_STOP_UNIT_IMMED_MASK 0x1 +#define SCSI_START_STOP_UNIT_IMMED_SHIFT 0 + +#define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1 +#define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0 + +#define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2 +#define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1 + +#define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4 +#define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2 + +#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF +#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0 + +#define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0 +#define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4 + +#define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0 +#define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6 + +#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F +#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0 + +/** + * + * + * MRIE - Method of reporting informational exceptions codes + */ +#define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0 +#define ASYNCHRONOUS_EVENT_REPORTING 0x1 +#define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2 +#define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3 +#define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4 +#define GENERATE_NO_SENSE 0x5 +#define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6 + +#define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08 + +/* Reassign Blocks masks */ +#define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02 +#define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01 + +#endif /* _SCSI_H_ */ + diff --git a/drivers/scsi/isci/core/sati_device.h b/drivers/scsi/isci/core/sati_device.h new file mode 100644 index 0000000..4d1cfde --- /dev/null +++ b/drivers/scsi/isci/core/sati_device.h @@ -0,0 +1,156 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SATI_DEVICE_H_ +#define _SATI_DEVICE_H_ + +/** + * This file contains all of the defintions for the SATI remote device object. + * Some translations require information to be remembered on a per device + * basis. This information is stored in the object defined in this file. + * + * + */ + +#include "sati_types.h" +#include "intel_ata.h" + +/** + * enum _SATI_DEVICE_STATE - This enumeration depicts the various states + * possible for the a translation remote device object. + * + * + */ +enum sati_device_state { + SATI_DEVICE_STATE_OPERATIONAL, + SATI_DEVICE_STATE_STOPPED, + SATI_DEVICE_STATE_STANDBY, + SATI_DEVICE_STATE_IDLE, + SATI_DEVICE_STATE_DEVICE_FAULT_OCCURRED, + SATI_DEVICE_STATE_FORMAT_UNIT_IN_PROGRESS, + SATI_DEVICE_STATE_SELF_TEST_IN_PROGRESS, + SATI_DEVICE_STATE_SEQUENCE_INCOMPLETE, + SATI_DEVICE_STATE_UNIT_ATTENTION_CONDITION + +}; + +/** + * + * + * SATI_DEVICE_CAPABILITIES These constants define the various capabilities + * that a remote device may support for which there is an impact on translation. + */ +#define SATI_DEVICE_CAP_UDMA_ENABLE 0x00000001 +#define SATI_DEVICE_CAP_NCQ_REQUESTED_ENABLE 0x00000002 +#define SATI_DEVICE_CAP_NCQ_SUPPORTED_ENABLE 0x00000004 +#define SATI_DEVICE_CAP_48BIT_ENABLE 0x00000008 +#define SATI_DEVICE_CAP_DMA_FUA_ENABLE 0x00000010 +#define SATI_DEVICE_CAP_SMART_SUPPORT 0x00000020 +#define SATI_DEVICE_CAP_REMOVABLE_MEDIA 0x00000040 +#define SATI_DEVICE_CAP_SMART_ENABLE 0x00000080 +#define SATI_DEVICE_CAP_WRITE_UNCORRECTABLE_ENABLE 0x00000100 +#define SATI_DEVICE_CAP_MULTIPLE_SECTORS_PER_PHYSCIAL_SECTOR 0x00000200 +#define SATI_DEVICE_CAP_SMART_SELF_TEST_SUPPORT 0x00000400 + + +/** + * struct sati_device - The SATI_DEVICE structure define the state of the + * remote device with respect to translation. + * + * + */ +struct sati_device { + /** + * This field simply dictates the state of the SATI device. + */ + enum sati_device_state state; + + /** + * This field indicates features supported by the remote device that + * impact translation execution. + */ + u16 capabilities; + + /** + * This field indicates the depth of the native command queue supported + * by the device. + */ + u8 ncq_depth; + + /** + * This field stores the additional sense code for a unit attention + * condition. + */ + u8 unit_attention_asc; + + /** + * This field indicates the additional sense code qualifier for a unit + * attention condition. + */ + u8 unit_attention_ascq; + +}; + +void sati_device_construct( + struct sati_device *device, + bool is_ncq_enabled, + u8 max_ncq_depth); + +void sati_device_update_capabilities( + struct sati_device *device, + struct ata_identify_device_data *identify); + +#endif /* _SATI_TRANSLATOR_SEQUENCE_H_ */ + diff --git a/drivers/scsi/isci/core/sati_translator_sequence.h b/drivers/scsi/isci/core/sati_translator_sequence.h new file mode 100644 index 0000000..592570d --- /dev/null +++ b/drivers/scsi/isci/core/sati_translator_sequence.h @@ -0,0 +1,304 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SATI_TRANSLATOR_SEQUENCE_H_ +#define _SATI_TRANSLATOR_SEQUENCE_H_ + +/** + * This file contains all of the defintions for the SATI translator sequence. + * A translator sequence is simply a defintion for the various sequences of + * commands that occur in this translator. + * + * + */ + +#include "sati_device.h" + +/** + * enum _SATI_TRANSLATOR_SEQUENCE_TYPE - This enumeration defines the possible + * sequence types for the translator. + * + * + */ +enum sati_translator_sequence_type { + /* SCSI Primary Command (SPC) sequences. */ + SATI_SEQUENCE_REPORT_LUNS, + SATI_SEQUENCE_TEST_UNIT_READY, + SATI_SEQUENCE_INQUIRY_STANDARD, + SATI_SEQUENCE_INQUIRY_SUPPORTED_PAGES, + SATI_SEQUENCE_INQUIRY_SERIAL_NUMBER, + SATI_SEQUENCE_INQUIRY_DEVICE_ID, + SATI_SEQUENCE_INQUIRY_BLOCK_DEVICE, + SATI_SEQUENCE_MODE_SENSE_6_CACHING, + SATI_SEQUENCE_MODE_SENSE_6_INFORMATIONAL_EXCP_CONTROL, + SATI_SEQUENCE_MODE_SENSE_6_READ_WRITE_ERROR, + SATI_SEQUENCE_MODE_SENSE_6_DISCONNECT_RECONNECT, + SATI_SEQUENCE_MODE_SENSE_6_CONTROL, + SATI_SEQUENCE_MODE_SENSE_6_ALL_PAGES, + SATI_SEQUENCE_MODE_SENSE_10_CACHING, + SATI_SEQUENCE_MODE_SENSE_10_INFORMATIONAL_EXCP_CONTROL, + SATI_SEQUENCE_MODE_SENSE_10_READ_WRITE_ERROR, + SATI_SEQUENCE_MODE_SENSE_10_DISCONNECT_RECONNECT, + SATI_SEQUENCE_MODE_SENSE_10_CONTROL, + SATI_SEQUENCE_MODE_SENSE_10_ALL_PAGES, + SATI_SEQUENCE_MODE_SELECT_MODE_PAGE_CACHING, + SATI_SEQUENCE_MODE_SELECT_MODE_POWER_CONDITION, + SATI_SEQUENCE_MODE_SELECT_MODE_INFORMATION_EXCEPT_CONTROL, + + /* Log Sense Sequences */ + SATI_SEQUENCE_LOG_SENSE_SELF_TEST_LOG_PAGE, + SATI_SEQUENCE_LOG_SENSE_EXTENDED_SELF_TEST_LOG_PAGE, + SATI_SEQUENCE_LOG_SENSE_SUPPORTED_LOG_PAGE, + SATI_SEQUENCE_LOG_SENSE_INFO_EXCEPTION_LOG_PAGE, + + /* SCSI Block Command (SBC) sequences. */ + + SATI_SEQUENCE_READ_6, + SATI_SEQUENCE_READ_10, + SATI_SEQUENCE_READ_12, + SATI_SEQUENCE_READ_16, + + SATI_SEQUENCE_READ_CAPACITY_10, + SATI_SEQUENCE_READ_CAPACITY_16, + + SATI_SEQUENCE_SYNCHRONIZE_CACHE, + + SATI_SEQUENCE_VERIFY_10, + SATI_SEQUENCE_VERIFY_12, + SATI_SEQUENCE_VERIFY_16, + + SATI_SEQUENCE_WRITE_6, + SATI_SEQUENCE_WRITE_10, + SATI_SEQUENCE_WRITE_12, + SATI_SEQUENCE_WRITE_16, + + SATI_SEQUENCE_START_STOP_UNIT, + + SATI_SEQUENCE_REASSIGN_BLOCKS, + + /* SCSI Task Requests sequences */ + + SATI_SEQUENCE_LUN_RESET, + + SATI_SEQUENCE_REQUEST_SENSE_SMART_RETURN_STATUS, + SATI_SEQUENCE_REQUEST_SENSE_CHECK_POWER_MODE, + + SATI_SEQUENCE_WRITE_LONG + +}; + +#define SATI_SEQUENCE_TYPE_READ_MIN SATI_SEQUENCE_READ_6 +#define SATI_SEQUENCE_TYPE_READ_MAX SATI_SEQUENCE_READ_16 + +/** + * + * + * SATI_SEQUENCE_STATES These constants depict the various state values + * associated with a translation sequence. + */ +#define SATI_SEQUENCE_STATE_INITIAL 0 +#define SATI_SEQUENCE_STATE_TRANSLATE_DATA 1 +#define SATI_SEQUENCE_STATE_AWAIT_RESPONSE 2 +#define SATI_SEQUENCE_STATE_FINAL 3 +#define SATI_SEQUENCE_STATE_INCOMPLETE 4 + +/** + * + * + * SATI_DATA_DIRECTIONS These constants depict the various types of data + * directions for a translation sequence. Data can flow in/out (read/write) or + * no data at all. + */ +#define SATI_DATA_DIRECTION_NONE 0 +#define SATI_DATA_DIRECTION_IN 1 +#define SATI_DATA_DIRECTION_OUT 2 + +/** + * struct SATI_MODE_SELECT_PROCESSING_STATE - This structure contains all of + * the current processing states for processing mode select 6 and 10 + * commands' parameter fields. + * + * + */ +typedef struct SATI_MODE_SELECT_PROCESSING_STATE { + u8 *mode_pages; + u32 mode_page_offset; + u32 mode_pages_size; + u32 size_of_data_processed; + u32 total_ata_command_sent; + u32 ata_command_sent_for_cmp; /* cmp: current mode page */ + bool current_mode_page_processed; + +} SATI_MODE_SELECT_PROCESSING_STATE_T; + + +enum SATI_REASSIGN_BLOCKS_ATA_COMMAND_STATUS { + SATI_REASSIGN_BLOCKS_READY_TO_SEND, + SATI_REASSIGN_BLOCKS_COMMAND_FAIL, + SATI_REASSIGN_BLOCKS_COMMAND_SUCCESS, +}; + +/** + * struct sati_reassign_blocks_processing_state - This structure contains all + * of the current processing states for processing reassign block command's + * parameter fields. + * + * + */ +struct sati_reassign_blocks_processing_state { + u32 lba_offset; + u32 block_lists_size; + u8 lba_size; + u32 size_of_data_processed; + u32 ata_command_sent_for_current_lba; + bool current_lba_processed; + enum SATI_REASSIGN_BLOCKS_ATA_COMMAND_STATUS ata_command_status; + +}; + +#define SATI_ATAPI_REQUEST_SENSE_CDB_LENGTH 12 + +/** + * struct sati_atapi_data - The SATI_ATAPI_DATA structure is for sati atapi IO + * specific data. + * + * + */ +struct sati_atapi_data { + u8 request_sense_cdb[SATI_ATAPI_REQUEST_SENSE_CDB_LENGTH]; +}; + +/** + * struct sati_translator_sequence - This structure contains all of the + * translation information associated with a particular request. + * + * + */ +struct sati_translator_sequence { + /** + * This field contains the sequence type determined by the SATI. + */ + u8 type; + + /** + * This field indicates the current state for the sequence. + */ + u8 state; + + /** + * This field indicates the data direction (none, read, or write) for + * the translated request. + */ + u8 data_direction; + + /** + * This field contains the SATA/ATA protocol to be utilized during + * the IO transfer. + */ + u8 protocol; + + /** + * This field is utilized for sequences requiring data translation. + * It specifies the amount of data requested by the caller from the + * operation. It's necessary, because at times the user requests less + * data than is available. Thus, we need to avoid overrunning the + * buffer. + */ + u32 allocation_length; + + /** + * This field specifies the amount of data that will actually be + * transfered across the wire for this ATA request. + */ + u32 ata_transfer_length; + + /** + * This field specifies the amount of data bytes that have been + * set in a translation sequence. It will be incremented every time + * a data byte has been set by a sati translation. + */ + u16 number_data_bytes_set; + + /** + * This field indicates whether or not the sense response has been set + * by the translation sequence. + */ + bool is_sense_response_set; + + /** + * This field specifies the remote device context for which this + * translator sequence is destined. + */ + struct sati_device *device; + + /** + * This field is utilized to provide the translator with memory space + * required for translations that utilize multiple requests. + */ + union { + u32 translated_command; + u32 move_sector_count; + u32 scratch; + struct sati_reassign_blocks_processing_state reassign_blocks_process_state; + SATI_MODE_SELECT_PROCESSING_STATE_T process_state; + struct sati_atapi_data sati_atapi_data; + } command_specific_data; + +}; + + + +#endif /* _SATI_TRANSLATOR_SEQUENCE_H_ */ + diff --git a/drivers/scsi/isci/core/sati_types.h b/drivers/scsi/isci/core/sati_types.h new file mode 100644 index 0000000..b6159e0 --- /dev/null +++ b/drivers/scsi/isci/core/sati_types.h @@ -0,0 +1,145 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SATI_TYPES_H_ +#define _SATI_TYPES_H_ + +/** + * This file contains various type definitions to be utilized with SCSI to ATA + * Translation Implementation. + * + * + */ + +/** + * enum _SATI_STATUS - This enumeration defines the possible return values from + * the SATI translation methods. + * + * + */ +enum sati_status { + /** + * This indicates that the translation was supported and occurred + * without error. + */ + SATI_SUCCESS, + + /** + * This indicates that the translation was supported, occurred without + * error, and no additional translation is necessary. This is done in + * conditions where the SCSI command doesn't require any interaction with + * the remote device. + */ + SATI_COMPLETE, + + /** + * This indicated everything SATI_COMPLETE does in addition to the response data + * not using all the memory allocated by the OS. + */ + SATI_COMPLETE_IO_DONE_EARLY, + + /** + * This indicates that translator sequence has finished some specific + * command in the sequence, but additional commands are necessary. + */ + SATI_SEQUENCE_INCOMPLETE, + + /** + * This indicates a general failure has occurred for which no further + * specification information is available. + */ + SATI_FAILURE, + + /** + * This indicates that the result of the IO request indicates a + * failure. The caller should reference the corresponding response + * data for further details. + */ + SATI_FAILURE_CHECK_RESPONSE_DATA, + + /** + * This status indicates that the supplied sequence type doesn't map + * to an existing definition. + */ + SATI_FAILURE_INVALID_SEQUENCE_TYPE, + + /** + * This status indicates that the supplied sequence state doesn't match + * the operation being requested by the user. + */ + SATI_FAILURE_INVALID_STATE + +}; + +#if (!defined(DISABLE_SATI_MODE_SENSE) \ + || !defined(DISABLE_SATI_MODE_SELECT) \ + || !defined(DISABLE_SATI_REQUEST_SENSE)) \ + +#if !defined(ENABLE_SATI_MODE_PAGES) +/** + * + * + * This macro enables the common mode page data structures and code. Currently, + * MODE SENSE, MODE SELECT, and REQUEST SENSE all make reference to this common + * code. As a result, enable the common mode page code if any of these 3 are + * being translated. + */ +#define ENABLE_SATI_MODE_PAGES +#endif /* !defined(ENABLE_SATI_MODE_PAGES) */ + +#endif /* MODE_SENSE/SELECT/REQUEST_SENSE */ + +#endif /* _SATI_TYPES_H_ */ + diff --git a/drivers/scsi/isci/core/sci_base_controller.h b/drivers/scsi/isci/core/sci_base_controller.h new file mode 100644 index 0000000..36c5340 --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_controller.h @@ -0,0 +1,306 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_CONTROLLER_H_ +#define _SCI_BASE_CONTROLLER_H_ + +#include "intel_sas.h" +#include "sci_controller_constants.h" +#include "sci_base_state.h" +#include "sci_base_memory_descriptor_list.h" +#include "sci_base_state_machine.h" +#include "sci_object.h" + +struct sci_base_memory_descriptor_list; + +/** + * enum sci_base_controller_states - This enumeration depicts all the states + * for the common controller state machine. + * + * + */ +enum sci_base_controller_states { + /** + * Simply the initial state for the base controller state machine. + */ + SCI_BASE_CONTROLLER_STATE_INITIAL = 0, + + /** + * This state indicates that the controller is reset. The memory for + * the controller is in it's initial state, but the controller requires + * initialization. + * This state is entered from the INITIAL state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_CONTROLLER_STATE_RESET, + + /** + * This state is typically an action state that indicates the controller + * is in the process of initialization. In this state no new IO operations + * are permitted. + * This state is entered from the RESET state. + */ + SCI_BASE_CONTROLLER_STATE_INITIALIZING, + + /** + * This state indicates that the controller has been successfully + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + */ + SCI_BASE_CONTROLLER_STATE_INITIALIZED, + + /** + * This state indicates the the controller is in the process of becoming + * ready (i.e. starting). In this state no new IO operations are permitted. + * This state is entered from the INITIALIZED state. + */ + SCI_BASE_CONTROLLER_STATE_STARTING, + + /** + * This state indicates the controller is now ready. Thus, the user + * is able to perform IO operations on the controller. + * This state is entered from the STARTING state. + */ + SCI_BASE_CONTROLLER_STATE_READY, + + /** + * This state is typically an action state that indicates the controller + * is in the process of resetting. Thus, the user is unable to perform + * IO operations on the controller. A reset is considered destructive in + * most cases. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + * This state is entered from the STOPPED state. + */ + SCI_BASE_CONTROLLER_STATE_RESETTING, + + /** + * This state indicates that the controller is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_BASE_CONTROLLER_STATE_STOPPING, + + /** + * This state indicates that the controller has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_BASE_CONTROLLER_STATE_STOPPED, + + /** + * This state indicates that the controller could not successfully be + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the STARTING state. + * This state is entered from the STOPPING state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_CONTROLLER_STATE_FAILED, + + SCI_BASE_CONTROLLER_MAX_STATES + +}; + +/** + * struct sci_base_controller - The base controller object abstracts the fields + * common to all SCI controller objects. + * + * + */ +struct sci_base_controller { + /** + * The field specifies that the parent object for the base controller + * is the base object itself. + */ + struct sci_base_object parent; + + /** + * This field points to the memory descriptor list associated with this + * controller. The MDL indicates the memory requirements necessary for + * this controller object. + */ + struct sci_base_memory_descriptor_list mdl; + + /** + * This field contains the information for the base controller state + * machine. + */ + struct sci_base_state_machine state_machine; +}; + +/* Forward declarations */ +struct sci_base_remote_device; +struct sci_base_request; + +typedef enum sci_status +(*sci_base_controller_handler_t)(struct sci_base_controller *); + +typedef enum sci_status +(*sci_base_controller_timed_handler_t)(struct sci_base_controller *, u32); + +typedef enum sci_status +(*sci_base_controller_request_handler_t)(struct sci_base_controller *, + struct sci_base_remote_device *, + struct sci_base_request *); + +typedef enum sci_status +(*sci_base_controller_start_request_handler_t)(struct sci_base_controller *, + struct sci_base_remote_device *, + struct sci_base_request *, u16); + +/** + * struct sci_base_controller_state_handler - This structure contains all of + * the state handler methods common to base controller state machines. + * Handler methods provide the ability to change the behavior for user + * requests or transitions depending on the state the machine is in. + * + * + */ +struct sci_base_controller_state_handler { + /** + * The start_handler specifies the method invoked when a user attempts to + * start a controller. + */ + sci_base_controller_timed_handler_t start; + + /** + * The stop_handler specifies the method invoked when a user attempts to + * stop a controller. + */ + sci_base_controller_timed_handler_t stop; + + /** + * The reset_handler specifies the method invoked when a user attempts to + * reset a controller. + */ + sci_base_controller_handler_t reset; + + /** + * The initialize_handler specifies the method invoked when a user + * attempts to initialize a controller. + */ + sci_base_controller_handler_t initialize; + + /** + * The start_io_handler specifies the method invoked when a user + * attempts to start an IO request for a controller. + */ + sci_base_controller_start_request_handler_t start_io; + + /** + * The complete_io_handler specifies the method invoked when a user + * attempts to complete an IO request for a controller. + */ + sci_base_controller_request_handler_t complete_io; + + /** + * The continue_io_handler specifies the method invoked when a user + * attempts to continue an IO request for a controller. + */ + sci_base_controller_request_handler_t continue_io; + + /** + * The start_task_handler specifies the method invoked when a user + * attempts to start a task management request for a controller. + */ + sci_base_controller_start_request_handler_t start_task; + + /** + * The complete_task_handler specifies the method invoked when a user + * attempts to complete a task management request for a controller. + */ + sci_base_controller_request_handler_t complete_task; + +}; + +/** + * sci_base_controller_construct() - Construct the base controller + * @this_controller: This parameter specifies the base controller to be + * constructed. + * @state_table: This parameter specifies the table of state definitions to be + * utilized for the controller state machine. + * @mde_array: This parameter specifies the array of memory descriptor entries + * to be managed by this list. + * @mde_array_length: This parameter specifies the size of the array of entries. + * @next_mdl: This parameter specifies a subsequent MDL object to be managed by + * this MDL object. + * @oem_parameters: This parameter specifies the original equipment + * manufacturer parameters to be utilized by this controller object. + * + */ +static inline void sci_base_controller_construct( + struct sci_base_controller *scic_base, + const struct sci_base_state *state_table, + struct sci_physical_memory_descriptor *mdes, + u32 mde_count, + struct sci_base_memory_descriptor_list *next_mdl) +{ + scic_base->parent.private = NULL; + + sci_base_state_machine_construct( + &scic_base->state_machine, + &scic_base->parent, + state_table, + SCI_BASE_CONTROLLER_STATE_INITIAL + ); + + sci_base_mdl_construct(&scic_base->mdl, mdes, mde_count, next_mdl); + + sci_base_state_machine_start(&scic_base->state_machine); +} + +#endif /* _SCI_BASE_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c new file mode 100644 index 0000000..86ae6a8 --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c @@ -0,0 +1,159 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the base implementation for the memory descriptor list. + * This is currently comprised of MDL iterator methods. + * + * + */ + +#include "sci_environment.h" +#include "sci_base_memory_descriptor_list.h" + +/* + * ****************************************************************************** + * * P U B L I C M E T H O D S + * ****************************************************************************** */ + +void sci_mdl_first_entry( + struct sci_base_memory_descriptor_list *base_mdl) +{ + base_mdl->next_index = 0; + + /* + * If this MDL is managing another MDL, then recursively rewind that MDL + * object as well. */ + if (base_mdl->next_mdl != SCI_INVALID_HANDLE) + sci_mdl_first_entry(base_mdl->next_mdl); +} + + +void sci_mdl_next_entry( + struct sci_base_memory_descriptor_list *base_mdl) +{ + /* + * If there is at least one more entry left in the array, then change + * the next pointer to it. */ + if (base_mdl->next_index < base_mdl->length) + base_mdl->next_index++; + else if (base_mdl->next_index == base_mdl->length) { + /* + * This MDL has exhausted it's set of entries. If this MDL is managing + * another MDL, then start iterating through that MDL. */ + if (base_mdl->next_mdl != SCI_INVALID_HANDLE) + sci_mdl_next_entry(base_mdl->next_mdl); + } +} + + +struct sci_physical_memory_descriptor *sci_mdl_get_current_entry( + struct sci_base_memory_descriptor_list *base_mdl) +{ + if (base_mdl->next_index < base_mdl->length) + return &base_mdl->mde_array[base_mdl->next_index]; + else if (base_mdl->next_index == base_mdl->length) { + /* + * This MDL has exhausted it's set of entries. If this MDL is managing + * another MDL, then return it's current entry. */ + if (base_mdl->next_mdl != SCI_INVALID_HANDLE) + return sci_mdl_get_current_entry(base_mdl->next_mdl); + } + + return NULL; +} + +/* + * ****************************************************************************** + * * P R O T E C T E D M E T H O D S + * ****************************************************************************** */ + +void sci_base_mdl_construct( + struct sci_base_memory_descriptor_list *mdl, + struct sci_physical_memory_descriptor *mde_array, + u32 mde_array_length, + struct sci_base_memory_descriptor_list *next_mdl) +{ + mdl->length = mde_array_length; + mdl->mde_array = mde_array; + mdl->next_index = 0; + mdl->next_mdl = next_mdl; +} + +/* --------------------------------------------------------------------------- */ + +bool sci_base_mde_is_valid( + struct sci_physical_memory_descriptor *mde, + u32 alignment, + u32 size, + u16 attributes) +{ + /* Only need the lower 32 bits to ensure alignment is met. */ + u32 physical_address = lower_32_bits(mde->physical_address); + + if ( + ((((unsigned long)mde->virtual_address) & (alignment - 1)) != 0) + || ((physical_address & (alignment - 1)) != 0) + || (mde->constant_memory_alignment != alignment) + || (mde->constant_memory_size != size) + || (mde->virtual_address == NULL) + || (mde->constant_memory_attributes != attributes) + ) { + return false; + } + + return true; +} + diff --git a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h new file mode 100644 index 0000000..257d6e3 --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h @@ -0,0 +1,155 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_MEMORY_DESCRIPTOR_LIST_H_ +#define _SCI_BASE_MEMORY_DESCRIPTOR_LIST_H_ + +/** + * This file contains the protected interface structures, constants and + * interface methods for the struct sci_base_memory_descriptor_list object. + * + * + */ + + +#include "sci_types.h" +#include "sci_memory_descriptor_list.h" + + +/** + * struct sci_base_memory_descriptor_list - This structure contains all of the + * fields necessary to implement a simple stack for managing the list of + * available controller indices. + * + * + */ +struct sci_base_memory_descriptor_list { + /** + * This field indicates the length of the memory descriptor entry array. + */ + u32 length; + + /** + * This field is utilized to provide iterator pattern functionality. + * It indicates the index of the next memory descriptor in the iteration. + */ + u32 next_index; + + /** + * This field will point to the list of memory descriptors. + */ + struct sci_physical_memory_descriptor *mde_array; + + /** + * This field simply allows a user to chain memory descriptor lists + * together if desired. This field will be initialized to + * SCI_INVALID_HANDLE. + */ + struct sci_base_memory_descriptor_list *next_mdl; + +}; + +/** + * sci_base_mdl_construct() - This method is invoked to construct an memory + * descriptor list. It initializes the fields of the MDL. + * @mdl: This parameter specifies the memory descriptor list to be constructed. + * @mde_array: This parameter specifies the array of memory descriptor entries + * to be managed by this list. + * @mde_array_length: This parameter specifies the size of the array of entries. + * @next_mdl: This parameter specifies a subsequent MDL object to be managed by + * this MDL object. + * + * none. + */ +void sci_base_mdl_construct( + struct sci_base_memory_descriptor_list *mdl, + struct sci_physical_memory_descriptor *mde_array, + u32 mde_array_length, + struct sci_base_memory_descriptor_list *next_mdl); + +/** + * sci_base_mde_construct() - + * + * This macro constructs an memory descriptor entry with the given alignment + * and size + */ +#define sci_base_mde_construct(mde, alignment, size, attributes) \ + { \ + (mde)->constant_memory_alignment = (alignment); \ + (mde)->constant_memory_size = (size); \ + (mde)->constant_memory_attributes = (attributes); \ + } + +/** + * sci_base_mde_is_valid() - This method validates that the memory descriptor + * is correctly filled out by the SCI User + * @mde: This parameter is the mde entry to validate + * @alignment: This parameter specifies the expected alignment of the memory + * for the mde. + * @size: This parameter specifies the memory size expected for the mde its + * value should not have been changed by the SCI User. + * @attributes: This parameter specifies the attributes for the memory + * descriptor provided. + * + * bool This method returns an indication as to whether the supplied MDE is + * valid or not. true The MDE is valid. false The MDE is not valid. + */ +bool sci_base_mde_is_valid( + struct sci_physical_memory_descriptor *mde, + u32 alignment, + u32 size, + u16 attributes); + +#endif /* _SCI_BASE_MEMORY_DESCRIPTOR_LIST_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_phy.h b/drivers/scsi/isci/core/sci_base_phy.h new file mode 100644 index 0000000..6c0d9bb --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_phy.h @@ -0,0 +1,205 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_PHY_H_ +#define _SCI_BASE_PHY_H_ + +/** + * This file contains all of the structures, constants, and methods common to + * all phy object definitions. + * + * + */ + +#include "sci_base_state_machine.h" + +/** + * enum sci_base_phy_states - This enumeration depicts the standard states + * common to all phy state machine implementations. + * + * + */ +enum sci_base_phy_states { + /** + * Simply the initial state for the base domain state machine. + */ + SCI_BASE_PHY_STATE_INITIAL, + + /** + * This state indicates that the phy has successfully been stopped. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the INITIAL state. + * This state is entered from the STARTING state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PHY_STATE_STOPPED, + + /** + * This state indicates that the phy is in the process of becomming + * ready. In this state no new IO operations are permitted on this phy. + * This state is entered from the STOPPED state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PHY_STATE_STARTING, + + /** + * This state indicates the the phy is now ready. Thus, the user + * is able to perform IO operations utilizing this phy as long as it + * is currently part of a valid port. + * This state is entered from the STARTING state. + */ + SCI_BASE_PHY_STATE_READY, + + /** + * This state indicates that the phy is in the process of being reset. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the READY state. + */ + SCI_BASE_PHY_STATE_RESETTING, + + /** + * Simply the final state for the base phy state machine. + */ + SCI_BASE_PHY_STATE_FINAL, + + SCI_BASE_PHY_MAX_STATES + +}; + +/** + * struct sci_base_phy - This structure defines all of the fields common to PHY + * objects. + * + * + */ +struct sci_base_phy { + /** + * This field depicts the parent object (struct sci_base_object) for the phy. + */ + struct sci_base_object parent; + + /** + * This field contains the information for the base phy state machine. + */ + struct sci_base_state_machine state_machine; +}; + +typedef enum sci_status (*SCI_BASE_PHY_HANDLER_T)( + struct sci_base_phy * + ); + +/** + * struct sci_base_phy_state_handler - This structure contains all of the state + * handler methods common to base phy state machines. Handler methods + * provide the ability to change the behavior for user requests or + * transitions depending on the state the machine is in. + * + * + */ +struct sci_base_phy_state_handler { + /** + * The start_handler specifies the method invoked when there is an + * attempt to start a phy. + */ + SCI_BASE_PHY_HANDLER_T start_handler; + + /** + * The stop_handler specifies the method invoked when there is an + * attempt to stop a phy. + */ + SCI_BASE_PHY_HANDLER_T stop_handler; + + /** + * The reset_handler specifies the method invoked when there is an + * attempt to reset a phy. + */ + SCI_BASE_PHY_HANDLER_T reset_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a phy. + */ + SCI_BASE_PHY_HANDLER_T destruct_handler; + +}; + +/** + * sci_base_phy_construct() - Construct the base phy + * @this_phy: This parameter specifies the base phy to be constructed. + * @state_table: This parameter specifies the table of state definitions to be + * utilized for the phy state machine. + * + */ +static inline void sci_base_phy_construct( + struct sci_base_phy *base_phy, + const struct sci_base_state *state_table) +{ + base_phy->parent.private = NULL; + sci_base_state_machine_construct( + &base_phy->state_machine, + &base_phy->parent, + state_table, + SCI_BASE_PHY_STATE_INITIAL + ); + + sci_base_state_machine_start( + &base_phy->state_machine + ); +} + + +#endif /* _SCI_BASE_PHY_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_port.h b/drivers/scsi/isci/core/sci_base_port.h new file mode 100644 index 0000000..4e2031d --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_port.h @@ -0,0 +1,203 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_PORT_H_ +#define _SCI_BASE_PORT_H_ + +#include "sci_base_state_machine.h" +#include "sci_object.h" + +/** + * enum sci_base_port_states - This enumeration depicts all the states for the + * common port state machine. + * + * + */ +enum sci_base_port_states { + /** + * This state indicates that the port has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_BASE_PORT_STATE_STOPPED, + + /** + * This state indicates that the port is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_BASE_PORT_STATE_STOPPING, + + /** + * This state indicates the port is now ready. Thus, the user is + * able to perform IO operations on this port. + * This state is entered from the STARTING state. + */ + SCI_BASE_PORT_STATE_READY, + + /** + * This state indicates the port is in the process of performing a hard + * reset. Thus, the user is unable to perform IO operations on this + * port. + * This state is entered from the READY state. + */ + SCI_BASE_PORT_STATE_RESETTING, + + /** + * This state indicates the port has failed a reset request. This state + * is entered when a port reset request times out. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PORT_STATE_FAILED, + + SCI_BASE_PORT_MAX_STATES + +}; + +/** + * struct sci_base_port - The base port object abstracts the fields common to + * all SCI port objects. + * + * + */ +struct sci_base_port { + /** + * The field specifies that the parent object for the base controller + * is the base object itself. + */ + struct sci_base_object parent; + + /** + * This field contains the information for the base port state machine. + */ + struct sci_base_state_machine state_machine; +}; + +struct sci_base_phy; + +typedef enum sci_status (*SCI_BASE_PORT_HANDLER_T)( + struct sci_base_port * + ); + +typedef enum sci_status (*SCI_BASE_PORT_PHY_HANDLER_T)( + struct sci_base_port *, + struct sci_base_phy * + ); + +typedef enum sci_status (*SCI_BASE_PORT_RESET_HANDLER_T)( + struct sci_base_port *, + u32 timeout + ); + +/** + * struct sci_base_port_state_handler - This structure contains all of the + * state handler methods common to base port state machines. Handler + * methods provide the ability to change the behavior for user requests or + * transitions depending on the state the machine is in. + * + * + */ +struct sci_base_port_state_handler { + /** + * The start_handler specifies the method invoked when a user attempts to + * start a port. + */ + SCI_BASE_PORT_HANDLER_T start_handler; + + /** + * The stop_handler specifies the method invoked when a user attempts to + * stop a port. + */ + SCI_BASE_PORT_HANDLER_T stop_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a port. + */ + SCI_BASE_PORT_HANDLER_T destruct_handler; + + /** + * The reset_handler specifies the method invoked when a user attempts to + * hard reset a port. + */ + SCI_BASE_PORT_RESET_HANDLER_T reset_handler; + + /** + * The add_phy_handler specifies the method invoked when a user attempts to + * add another phy into the port. + */ + SCI_BASE_PORT_PHY_HANDLER_T add_phy_handler; + + /** + * The remove_phy_handler specifies the method invoked when a user + * attempts to remove a phy from the port. + */ + SCI_BASE_PORT_PHY_HANDLER_T remove_phy_handler; + +}; + +/** + * sci_base_port_construct() - Construct the base port object + * @this_port: This parameter specifies the base port to be constructed. + * @state_table: This parameter specifies the table of state definitions to be + * utilized for the domain state machine. + * + */ +void sci_base_port_construct( + struct sci_base_port *this_port, + const struct sci_base_state *state_table); + +#endif /* _SCI_BASE_PORT_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_remote_device.h b/drivers/scsi/isci/core/sci_base_remote_device.h new file mode 100644 index 0000000..fe6614b --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_remote_device.h @@ -0,0 +1,277 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_REMOTE_DEVICE_H_ +#define _SCI_BASE_REMOTE_DEVICE_H_ + +/** + * This file contains all of the structures, constants, and methods common to + * all remote device object definitions. + * + * + */ + +#include "sci_base_state_machine.h" + +struct sci_base_request; + +/** + * enum sci_base_remote_device_states - This enumeration depicts all the states + * for the common remote device state machine. + * + * + */ +enum sci_base_remote_device_states { + /** + * Simply the initial state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL, + + /** + * This state indicates that the remote device has successfully been + * stopped. In this state no new IO operations are permitted. + * This state is entered from the INITIAL state. + * This state is entered from the STOPPING state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED, + + /** + * This state indicates the the remote device is in the process of + * becoming ready (i.e. starting). In this state no new IO operations + * are permitted. + * This state is entered from the STOPPED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STARTING, + + /** + * This state indicates the remote device is now ready. Thus, the user + * is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_READY, + + /** + * This state indicates that the remote device is in the process of + * stopping. In this state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, + + /** + * This state indicates that the remote device has failed. + * In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FAILED, + + /** + * This state indicates the device is being reset. + * In this state no new IO operations are permitted. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, + + /** + * Simply the final state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FINAL, + + SCI_BASE_REMOTE_DEVICE_MAX_STATES + +}; + +/** + * struct sci_base_remote_device - The base remote device object abstracts the + * fields common to all SCI remote device objects. + * + * + */ +struct sci_base_remote_device { + /** + * The field specifies that the parent object for the base remote + * device is the base object itself. + */ + struct sci_base_object parent; + + /** + * This field contains the information for the base remote device state + * machine. + */ + struct sci_base_state_machine state_machine; +}; + + +typedef enum sci_status (*SCI_BASE_REMOTE_DEVICE_HANDLER_T)( + struct sci_base_remote_device * + ); + +typedef enum sci_status (*SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T)( + struct sci_base_remote_device *, + struct sci_base_request * + ); + +typedef enum sci_status (*SCI_BASE_REMOTE_DEVICE_HIGH_PRIORITY_REQUEST_COMPLETE_HANDLER_T)( + struct sci_base_remote_device *, + struct sci_base_request *, + void *, + enum sci_io_status + ); + +/** + * struct sci_base_remote_device_state_handler - This structure contains all of + * the state handler methods common to base remote device state machines. + * Handler methods provide the ability to change the behavior for user + * requests or transitions depending on the state the machine is in. + * + * + */ +struct sci_base_remote_device_state_handler { + /** + * The start_handler specifies the method invoked when a user attempts to + * start a remote device. + */ + SCI_BASE_REMOTE_DEVICE_HANDLER_T start_handler; + + /** + * The stop_handler specifies the method invoked when a user attempts to + * stop a remote device. + */ + SCI_BASE_REMOTE_DEVICE_HANDLER_T stop_handler; + + /** + * The fail_handler specifies the method invoked when a remote device + * failure has occurred. A failure may be due to an inability to + * initialize/configure the device. + */ + SCI_BASE_REMOTE_DEVICE_HANDLER_T fail_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a remote device. + */ + SCI_BASE_REMOTE_DEVICE_HANDLER_T destruct_handler; + + /** + * The reset handler specifies the method invloked when requesting to reset a + * remote device. + */ + SCI_BASE_REMOTE_DEVICE_HANDLER_T reset_handler; + + /** + * The reset complete handler specifies the method invloked when reporting + * that a reset has completed to the remote device. + */ + SCI_BASE_REMOTE_DEVICE_HANDLER_T reset_complete_handler; + + /** + * The start_io_handler specifies the method invoked when a user + * attempts to start an IO request for a remote device. + */ + SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T start_io_handler; + + /** + * The complete_io_handler specifies the method invoked when a user + * attempts to complete an IO request for a remote device. + */ + SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T complete_io_handler; + + /** + * The continue_io_handler specifies the method invoked when a user + * attempts to continue an IO request for a remote device. + */ + SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T continue_io_handler; + + /** + * The start_task_handler specifies the method invoked when a user + * attempts to start a task management request for a remote device. + */ + SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T start_task_handler; + + /** + * The complete_task_handler specifies the method invoked when a user + * attempts to complete a task management request for a remote device. + */ + SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T complete_task_handler; + +}; + +/** + * sci_base_remote_device_construct() - Construct the base remote device + * @this_remote_device: This parameter specifies the base remote device to be + * constructed. + * @state_table: This parameter specifies the table of state definitions to be + * utilized for the remote device state machine. + * + */ +static inline void sci_base_remote_device_construct( + struct sci_base_remote_device *base_dev, + const struct sci_base_state *state_table) +{ + base_dev->parent.private = NULL; + sci_base_state_machine_construct( + &base_dev->state_machine, + &base_dev->parent, + state_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL + ); + + sci_base_state_machine_start( + &base_dev->state_machine + ); +} +#endif /* _SCI_BASE_REMOTE_DEVICE_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_request.h b/drivers/scsi/isci/core/sci_base_request.h new file mode 100644 index 0000000..d1b2195 --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_request.h @@ -0,0 +1,195 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_REQUST_H_ +#define _SCI_BASE_REQUST_H_ + +/** + * This file contains all of the constants, types, and method declarations for + * the SCI base IO and task request objects. + * + * + */ + +#include "sci_base_state_machine.h" + +/** + * enum sci_base_request_states - This enumeration depicts all the states for + * the common request state machine. + * + * + */ +enum sci_base_request_states { + /** + * Simply the initial state for the base request state machine. + */ + SCI_BASE_REQUEST_STATE_INITIAL, + + /** + * This state indicates that the request has been constructed. This state + * is entered from the INITIAL state. + */ + SCI_BASE_REQUEST_STATE_CONSTRUCTED, + + /** + * This state indicates that the request has been started. This state is + * entered from the CONSTRUCTED state. + */ + SCI_BASE_REQUEST_STATE_STARTED, + + /** + * This state indicates that the request has completed. + * This state is entered from the STARTED state. This state is entered from + * the ABORTING state. + */ + SCI_BASE_REQUEST_STATE_COMPLETED, + + /** + * This state indicates that the request is in the process of being + * terminated/aborted. + * This state is entered from the CONSTRUCTED state. + * This state is entered from the STARTED state. + */ + SCI_BASE_REQUEST_STATE_ABORTING, + + /** + * Simply the final state for the base request state machine. + */ + SCI_BASE_REQUEST_STATE_FINAL, +}; + +/** + * struct sci_base_request - The base request object abstracts the fields + * common to all SCI IO and task request objects. + * + * + */ +struct sci_base_request { + /** + * The field specifies that the parent object for the base request is the + * base object itself. + */ + struct sci_base_object parent; + + /** + * This field contains the information for the base request state machine. + */ + struct sci_base_state_machine state_machine; +}; + +typedef enum sci_status (*SCI_BASE_REQUEST_HANDLER_T)( + struct sci_base_request *this_request + ); + +/** + * struct sci_base_request_state_handler - This structure contains all of the + * state handler methods common to base IO and task request state machines. + * Handler methods provide the ability to change the behavior for user + * requests or transitions depending on the state the machine is in. + * + * + */ +struct sci_base_request_state_handler { + /** + * The start_handler specifies the method invoked when a user attempts to + * start a request. + */ + SCI_BASE_REQUEST_HANDLER_T start_handler; + + /** + * The abort_handler specifies the method invoked when a user attempts to + * abort a request. + */ + SCI_BASE_REQUEST_HANDLER_T abort_handler; + + /** + * The complete_handler specifies the method invoked when a user attempts to + * complete a request. + */ + SCI_BASE_REQUEST_HANDLER_T complete_handler; + + /** + * The destruct_handler specifies the method invoked when a user attempts to + * destruct a request. + */ + SCI_BASE_REQUEST_HANDLER_T destruct_handler; + +}; + +/** + * sci_base_request_construct() - Construct the base request. + * @this_request: This parameter specifies the base request to be constructed. + * @state_table: This parameter specifies the table of state definitions to be + * utilized for the request state machine. + * + */ +static inline void sci_base_request_construct( + struct sci_base_request *base_req, + const struct sci_base_state *my_state_table) +{ + base_req->parent.private = NULL; + sci_base_state_machine_construct( + &base_req->state_machine, + &base_req->parent, + my_state_table, + SCI_BASE_REQUEST_STATE_INITIAL + ); + + sci_base_state_machine_start( + &base_req->state_machine + ); +} + +#endif /* _SCI_BASE_REQUST_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_state.h b/drivers/scsi/isci/core/sci_base_state.h new file mode 100644 index 0000000..d6b9c1a --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_state.h @@ -0,0 +1,90 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_STATE_H_ +#define _SCI_BASE_STATE_H_ + +#include "sci_object.h" + +typedef void (*SCI_BASE_STATE_HANDLER_T)( + void + ); + +typedef void (*SCI_STATE_TRANSITION_T)( + struct sci_base_object *base_object + ); + +/** + * struct sci_base_state - The base state object abstracts the fields common to + * all state objects defined in SCI. + * + * + */ +struct sci_base_state { + /** + * This field is a function pointer that defines the method to be + * invoked when the state is entered. + */ + SCI_STATE_TRANSITION_T enter_state; + + /** + * This field is a function pointer that defines the method to be + * invoked when the state is exited. + */ + SCI_STATE_TRANSITION_T exit_state; + +}; + +#endif /* _SCI_BASE_STATE_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_state_machine.c b/drivers/scsi/isci/core/sci_base_state_machine.c new file mode 100644 index 0000000..5b1e8da --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_state_machine.c @@ -0,0 +1,182 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains all of the functionality common to all state machine + * object implementations. + * + * + */ + +#include "sci_base_state_machine.h" + +static void sci_state_machine_exit_state(struct sci_base_state_machine *sm) +{ + u32 state = sm->current_state_id; + SCI_STATE_TRANSITION_T exit = sm->state_table[state].exit_state; + + if (exit) + exit(sm->state_machine_owner); +} + +static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) +{ + u32 state = sm->current_state_id; + SCI_STATE_TRANSITION_T enter = sm->state_table[state].enter_state; + + if (enter) + enter(sm->state_machine_owner); +} + +/* + * ****************************************************************************** + * * P R O T E C T E D M E T H O D S + * ****************************************************************************** */ + +/** + * This method will set the initial state and state table for the state + * machine. The caller should follow this request with the initialize + * request to cause the state machine to start. + * @sm: This parameter provides the state machine object to be + * constructed. + * @state_machine_owner: This parameter indicates the object that is owns the + * state machine being constructed. + * @state_table: This parameter specifies the table of state objects that is + * managed by this state machine. + * @initial_state: This parameter specifies the value of the initial state for + * this state machine. + * + */ +void sci_base_state_machine_construct(struct sci_base_state_machine *sm, + struct sci_base_object *owner, + const struct sci_base_state *state_table, + u32 initial_state) +{ + sm->state_machine_owner = owner; + sm->initial_state_id = initial_state; + sm->previous_state_id = initial_state; + sm->current_state_id = initial_state; + sm->state_table = state_table; +} + +/** + * This method will cause the state machine to enter the initial state. + * @sm: This parameter specifies the state machine that is to + * be started. + * + * sci_base_state_machine_construct() for how to set the initial state none + */ +void sci_base_state_machine_start(struct sci_base_state_machine *sm) +{ + sm->current_state_id = sm->initial_state_id; +#if defined(SCI_BASE_ENABLE_SUBJECT_NOTIFICATION) + sci_base_subject_notify(&sm->parent); +#endif + sci_state_machine_enter_state(sm); +} + +/** + * This method will cause the state machine to exit it's current state only. + * @sm: This parameter specifies the state machine that is to + * be stopped. + * + */ +void sci_base_state_machine_stop( + struct sci_base_state_machine *sm) +{ + sci_state_machine_exit_state(sm); +#if defined(SCI_BASE_ENABLE_SUBJECT_NOTIFICATION) + sci_base_subject_notify(&sm->parent); +#endif +} + +/** + * This method performs an update to the current state of the state machine. + * @sm: This parameter specifies the state machine for which + * the caller wishes to perform a state change. + * @next_state: This parameter specifies the new state for the state machine. + * + */ +void sci_base_state_machine_change_state( + struct sci_base_state_machine *sm, + u32 next_state) +{ + sci_state_machine_exit_state(sm); + + sm->previous_state_id = sm->current_state_id; + sm->current_state_id = next_state; + +#if defined(SCI_BASE_ENABLE_SUBJECT_NOTIFICATION) + /* Notify of the state change prior to entering the state. */ + sci_base_subject_notify(&sm->parent); +#endif + + sci_state_machine_enter_state(sm); +} + +/** + * This method simply returns the current state of the state machine to the + * caller. + * @sm: This parameter specifies the state machine for which to + * retrieve the current state. + * + * This method returns a u32 value indicating the current state for the + * supplied state machine. + */ +u32 sci_base_state_machine_get_state(struct sci_base_state_machine *sm) +{ + return sm->current_state_id; +} + diff --git a/drivers/scsi/isci/core/sci_base_state_machine.h b/drivers/scsi/isci/core/sci_base_state_machine.h new file mode 100644 index 0000000..cee38bd --- /dev/null +++ b/drivers/scsi/isci/core/sci_base_state_machine.h @@ -0,0 +1,139 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_STATE_MACHINE_H_ +#define _SCI_BASE_STATE_MACHINE_H_ + +/** + * This file contains all structures, constants, or method declarations common + * to all state machines defined in SCI. + * + * + */ + + +#include "sci_base_state.h" + + +/** + * SET_STATE_HANDLER() - + * + * This macro simply provides simplified retrieval of an objects state handler. + */ +#define SET_STATE_HANDLER(object, table, state) \ + (object)->state_handlers = &(table)[(state)] + +/** + * struct sci_base_state_machine - This structure defines the fields common to + * all state machines. + * + * + */ +struct sci_base_state_machine { + /** + * This field points to the start of the state machine's state table. + */ + const struct sci_base_state *state_table; + + /** + * This field points to the object to which this state machine is + * associated. It serves as a cookie to be provided to the state + * enter/exit methods. + */ + struct sci_base_object *state_machine_owner; + + /** + * This field simply indicates the state value for the state machine's + * initial state. + */ + u32 initial_state_id; + + /** + * This field indicates the current state of the state machine. + */ + u32 current_state_id; + + /** + * This field indicates the previous state of the state machine. + */ + u32 previous_state_id; + +}; + +/* + * ****************************************************************************** + * * P R O T E C T E D M E T H O D S + * ****************************************************************************** */ + +void sci_base_state_machine_construct( + struct sci_base_state_machine *this_state_machine, + struct sci_base_object *state_machine_owner, + const struct sci_base_state *state_table, + u32 initial_state); + +void sci_base_state_machine_start( + struct sci_base_state_machine *this_state_machine); + +void sci_base_state_machine_stop( + struct sci_base_state_machine *this_state_machine); + +void sci_base_state_machine_change_state( + struct sci_base_state_machine *this_state_machine, + u32 next_state); + +u32 sci_base_state_machine_get_state( + struct sci_base_state_machine *this_state_machine); + +#endif /* _SCI_BASE_STATE_MACHINE_H_ */ diff --git a/drivers/scsi/isci/core/sci_controller.h b/drivers/scsi/isci/core/sci_controller.h new file mode 100644 index 0000000..26c3548 --- /dev/null +++ b/drivers/scsi/isci/core/sci_controller.h @@ -0,0 +1,100 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_CONTROLLER_H_ +#define _SCI_CONTROLLER_H_ + +/** + * This file contains all of the interface methods that can be called by an SCI + * user on all SCI controller objects. + * + * + */ + + +#include "sci_types.h" + +struct sci_base_memory_descriptor_list; +struct scic_sds_controller; + +#define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF + +/** + * sci_controller_get_memory_descriptor_list_handle() - This method simply + * returns a handle for the memory descriptor list associated with the + * supplied controller. The descriptor list provides DMA safe/capable + * memory requirements for this controller. + * @controller: This parameter specifies the controller for which to retrieve + * the DMA safe memory descriptor list. + * + * The user must adhere to the alignment requirements specified in memory + * descriptor. In situations where the operating environment does not offer + * memory allocation utilities supporting alignment, then it is the + * responsibility of the user to manually align the memory buffer for SCI. + * Thus, the user may have to allocate a larger buffer to meet the alignment. + * Additionally, the user will need to remember the actual memory allocation + * addresses in order to ensure the memory can be properly freed when necessary + * to do so. This method will return a valid handle, but the MDL may not be + * accurate until after the user has invoked the associated + * sci_controller_initialize() routine. A pointer to a physical memory + * descriptor array. + */ +struct sci_base_memory_descriptor_list * + sci_controller_get_memory_descriptor_list_handle( + struct scic_sds_controller *controller); + + +#endif /* _SCI_CONTROLLER_H_ */ + diff --git a/drivers/scsi/isci/core/sci_controller_constants.h b/drivers/scsi/isci/core/sci_controller_constants.h new file mode 100644 index 0000000..06c34c7 --- /dev/null +++ b/drivers/scsi/isci/core/sci_controller_constants.h @@ -0,0 +1,215 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_CONTROLLER_CONSTANTS_H_ +#define _SCI_CONTROLLER_CONSTANTS_H_ + +/** + * This file contains constant values that change based on the type of core or + * framework being managed. These constants are exported in order to + * provide the user with information as to the bounds (i.e. how many) of + * specific objects. + * + * + */ + + +#ifdef SCIC_SDS_4_ENABLED + +#ifndef SCI_MAX_PHYS +/** + * + * + * This constant defines the maximum number of phy objects that can be + * supported for the SCU Driver Standard (SDS) library. This is tied directly + * to silicon capabilities. + */ +#define SCI_MAX_PHYS (4) +#endif + +#ifndef SCI_MAX_PORTS +/** + * + * + * This constant defines the maximum number of port objects that can be + * supported for the SCU Driver Standard (SDS) library. This is tied directly + * to silicon capabilities. + */ +#define SCI_MAX_PORTS SCI_MAX_PHYS +#endif + +#ifndef SCI_MIN_SMP_PHYS +/** + * + * + * This constant defines the minimum number of SMP phy objects that can be + * supported for a single expander level. This was determined by using 36 + * physical phys and room for 2 virtual phys. + */ +#define SCI_MIN_SMP_PHYS (38) +#endif + +#ifndef SCI_MAX_SMP_PHYS +/** + * + * + * This constant defines the maximum number of SMP phy objects that can be + * supported for the SCU Driver Standard (SDS) library. This number can be + * increased if required. + */ +#define SCI_MAX_SMP_PHYS (384) +#endif + +#ifndef SCI_MAX_REMOTE_DEVICES +/** + * + * + * This constant defines the maximum number of remote device objects that can + * be supported for the SCU Driver Standard (SDS) library. This is tied + * directly to silicon capabilities. + */ +#define SCI_MAX_REMOTE_DEVICES (256) +#endif + +#ifndef SCI_MIN_REMOTE_DEVICES +/** + * + * + * This constant defines the minimum number of remote device objects that can + * be supported for the SCU Driver Standard (SDS) library. This # can be + * configured for minimum memory environments to any value less than + * SCI_MAX_REMOTE_DEVICES + */ +#define SCI_MIN_REMOTE_DEVICES (16) +#endif + +#ifndef SCI_MAX_IO_REQUESTS +/** + * + * + * This constant defines the maximum number of IO request objects that can be + * supported for the SCU Driver Standard (SDS) library. This is tied directly + * to silicon capabilities. + */ +#define SCI_MAX_IO_REQUESTS (256) +#endif + +#ifndef SCI_MIN_IO_REQUESTS +/** + * + * + * This constant defines the minimum number of IO request objects that can be + * supported for the SCU Driver Standard (SDS) library. This # can be + * configured for minimum memory environments to any value less than + * SCI_MAX_IO_REQUESTS. + */ +#define SCI_MIN_IO_REQUESTS (1) +#endif + +#ifndef SCI_MAX_MSIX_MESSAGES +/** + * + * + * This constant defines the maximum number of MSI-X interrupt vectors/messages + * supported for an SCU hardware controller instance. + */ +#define SCI_MAX_MSIX_MESSAGES (2) +#endif + +#ifndef SCI_MAX_SCATTER_GATHER_ELEMENTS +/** + * + * + * This constant defines the maximum number of Scatter-Gather Elements to be + * used by any SCI component. + */ +#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 +#endif + +#ifndef SCI_MIN_SCATTER_GATHER_ELEMENTS +/** + * + * + * This constant defines the minimum number of Scatter-Gather Elements to be + * used by any SCI component. + */ +#define SCI_MIN_SCATTER_GATHER_ELEMENTS 1 +#endif + +#else /* SCIC_SDS_4_ENABLED */ + +#error "SCI Core configuration left unspecified (e.g. SCIC_SDS_4_ENABLED)" + +#endif /* SCIC_SDS_4_ENABLED */ + +/** + * + * + * This constant defines the maximum number of controllers that can occur in a + * single silicon package. + */ +#define SCI_MAX_CONTROLLERS 2 + +/** + * + * + * The maximum number of supported domain objects is currently tied to the + * maximum number of support port objects. + */ +#define SCI_MAX_DOMAINS SCI_MAX_PORTS + + +#endif /* _SCI_CONTROLLER_CONSTANTS_H_ */ + diff --git a/drivers/scsi/isci/core/sci_memory_descriptor_list.h b/drivers/scsi/isci/core/sci_memory_descriptor_list.h new file mode 100644 index 0000000..44de1c1 --- /dev/null +++ b/drivers/scsi/isci/core/sci_memory_descriptor_list.h @@ -0,0 +1,169 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_MEMORY_DESCRIPTOR_LIST_H_ +#define _SCI_MEMORY_DESCRIPTOR_LIST_H_ + +/** + * This file contains all of the basic data types utilized by an SCI user or + * implementor. + * + * + */ + + +#include "sci_types.h" + +struct sci_base_memory_descriptor_list; + +/** + * + * + * SCI_MDE_ATTRIBUTES These constants depict memory attributes for the Memory + * Descriptor Entries (MDEs) contained in the MDL. + */ +#define SCI_MDE_ATTRIBUTE_CACHEABLE 0x0001 +#define SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS 0x0002 + +/** + * struct sci_physical_memory_descriptor - This structure defines a description + * of a memory location for the SCI implementation. + * + * + */ +struct sci_physical_memory_descriptor { + /** + * This field contains the virtual address associated with this descriptor + * element. This field shall be zero when the descriptor is retrieved from + * the SCI implementation. The user shall set this field prior + * sci_controller_start() + */ + void *virtual_address; + + /** + * This field contains the physical address associated with this desciptor + * element. This field shall be zero when the descriptor is retrieved from + * the SCI implementation. The user shall set this field prior + * sci_controller_start() + */ + dma_addr_t physical_address; + + /** + * This field contains the size requirement for this memory descriptor. + * A value of zero for this field indicates the end of the descriptor + * list. The value should be treated as read only for an SCI user. + */ + u32 constant_memory_size; + + /** + * This field contains the alignment requirement for this memory + * descriptor. A value of zero for this field indicates the end of the + * descriptor list. All other values indicate the number of bytes to + * achieve the necessary alignment. The value should be treated as + * read only for an SCI user. + */ + u32 constant_memory_alignment; + + /** + * This field contains an indication regarding the desired memory + * attributes for this memory descriptor entry. + * Notes: + * - If the cacheable attribute is set, the user can allocate + * memory that is backed by cache for better performance. It + * is not required that the memory be backed by cache. + * - If the physically contiguous attribute is set, then the + * entire memory must be physically contiguous across all + * page boundaries. + */ + u16 constant_memory_attributes; + +}; + +/** + * sci_mdl_first_entry() - This method simply rewinds the MDL iterator back to + * the first memory descriptor entry in the list. + * @mdl: This parameter specifies the memory descriptor list that is to be + * rewound. + * + */ +void sci_mdl_first_entry( + struct sci_base_memory_descriptor_list *mdl); + +/** + * sci_mdl_next_entry() - This method simply updates the "current" pointer to + * the next sequential memory descriptor. + * @mdl: This parameter specifies the memory descriptor list for which to + * return the next memory descriptor entry in the list. + * + * none. + */ +void sci_mdl_next_entry( + struct sci_base_memory_descriptor_list *mdl); + +/** + * sci_mdl_get_current_entry() - This method simply returns the current memory + * descriptor entry. + * @mdl: This parameter specifies the memory descriptor list for which to + * return the current memory descriptor entry. + * + * This method returns a pointer to the current physical memory descriptor in + * the MDL. NULL This value is returned if there are no descriptors in the list. + */ +struct sci_physical_memory_descriptor *sci_mdl_get_current_entry( + struct sci_base_memory_descriptor_list *mdl); + + +#endif /* _SCI_MEMORY_DESCRIPTOR_LIST_H_ */ + diff --git a/drivers/scsi/isci/core/sci_object.h b/drivers/scsi/isci/core/sci_object.h new file mode 100644 index 0000000..9306942 --- /dev/null +++ b/drivers/scsi/isci/core/sci_object.h @@ -0,0 +1,99 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_OBJECT_H_ +#define _SCI_OBJECT_H_ + +/** + * This file contains all of the method and constants associated with the SCI + * base object. The SCI base object is the class from which all other + * objects derive in the Storage Controller Interface. + * + * + */ + + +#include "sci_types.h" +#include "sci_status.h" + +/** + * struct sci_base_object - all core objects must include this as their + * first member to permit the casting below + * + * TODO: unwind this assumption, convert these routines and callers to pass a struct + * sci_base_object pointer without casting, or convert 'private' to the + * expected type per-object + * + */ +struct sci_base_object { + void *private; +}; + +static inline void *sci_object_get_association(void *obj) +{ + struct sci_base_object *base = obj; + + return base->private; +} + +static inline void sci_object_set_association(void *obj, void *private) +{ + struct sci_base_object *base = obj; + + base->private = private; +} + +#endif /* _SCI_OBJECT_H_ */ + diff --git a/drivers/scsi/isci/core/sci_pool.h b/drivers/scsi/isci/core/sci_pool.h new file mode 100644 index 0000000..c0d2ea3 --- /dev/null +++ b/drivers/scsi/isci/core/sci_pool.h @@ -0,0 +1,199 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the interface to the pool class. This class allows two + * different two different priority tasks to insert and remove items from + * the free pool. The user of the pool is expected to evaluate the pool + * condition empty before a get operation and pool condition full before a + * put operation. Methods Provided: - sci_pool_create() - + * sci_pool_initialize() - sci_pool_empty() - sci_pool_full() - + * sci_pool_get() - sci_pool_put() + * + * + */ + +#ifndef _SCI_POOL_H_ +#define _SCI_POOL_H_ + +/** + * SCI_POOL_INCREMENT() - + * + * Private operation for the pool + */ +#define SCI_POOL_INCREMENT(this_pool, index) \ + (((index) + 1) == (this_pool).size ? 0 : (index) + 1) + +/** + * SCI_POOL_CREATE() - + * + * This creates a pool structure of pool_name. The members in the pool are of + * type with number of elements equal to size. + */ +#define SCI_POOL_CREATE(pool_name, type, pool_size) \ + struct \ + { \ + u32 size; \ + u32 get; \ + u32 put; \ + type array[(pool_size) + 1]; \ + } pool_name + + +/** + * sci_pool_empty() - + * + * This macro evaluates the pool and returns true if the pool is empty. If the + * pool is empty the user should not perform any get operation on the pool. + */ +#define sci_pool_empty(this_pool) \ + ((this_pool).get == (this_pool).put) + +/** + * sci_pool_full() - + * + * This macro evaluates the pool and returns true if the pool is full. If the + * pool is full the user should not perform any put operation. + */ +#define sci_pool_full(this_pool) \ + (SCI_POOL_INCREMENT(this_pool, (this_pool).put) == (this_pool).get) + +/** + * sci_pool_size() - + * + * This macro returns the size of the pool created. The internal size of the + * pool is actually 1 larger then necessary in order to ensure get and put + * pointers can be written simultaneously by different users. As a result, + * this macro subtracts 1 from the internal size + */ +#define sci_pool_size(this_pool) \ + ((this_pool).size - 1) + +/** + * sci_pool_count() - + * + * This macro indicates the number of elements currently contained in the pool. + */ +#define sci_pool_count(this_pool) \ + (\ + sci_pool_empty((this_pool)) \ + ? 0 \ + : (\ + sci_pool_full((this_pool)) \ + ? sci_pool_size((this_pool)) \ + : (\ + (this_pool).get > (this_pool).put \ + ? ((this_pool).size - (this_pool).get + (this_pool).put) \ + : ((this_pool).put - (this_pool).get) \ + ) \ + ) \ + ) + +/** + * sci_pool_initialize() - + * + * This macro initializes the pool to an empty condition. + */ +#define sci_pool_initialize(this_pool) \ + { \ + (this_pool).size = (sizeof((this_pool).array) / sizeof((this_pool).array[0])); \ + (this_pool).get = 0; \ + (this_pool).put = 0; \ + } + +/** + * sci_pool_get() - + * + * This macro will get the next free element from the pool. This should only be + * called if the pool is not empty. + */ +#define sci_pool_get(this_pool, my_value) \ + { \ + (my_value) = (this_pool).array[(this_pool).get]; \ + (this_pool).get = SCI_POOL_INCREMENT((this_pool), (this_pool).get); \ + } + +/** + * sci_pool_put() - + * + * This macro will put the value into the pool. This should only be called if + * the pool is not full. + */ +#define sci_pool_put(this_pool, the_value) \ + { \ + (this_pool).array[(this_pool).put] = (the_value); \ + (this_pool).put = SCI_POOL_INCREMENT((this_pool), (this_pool).put); \ + } + +/** + * sci_pool_erase() - + * + * This macro will search the pool and remove any elements in the pool matching + * the supplied value. This method can only be utilized on pools + */ +#define sci_pool_erase(this_pool, type, the_value) \ + { \ + type tmp_value; \ + u32 index; \ + u32 element_count = sci_pool_count((this_pool)); \ + \ + for (index = 0; index < element_count; index++) { \ + sci_pool_get((this_pool), tmp_value); \ + if (tmp_value != (the_value)) \ + sci_pool_put((this_pool), tmp_value); \ + } \ + } + +#endif /* _SCI_POOL_H_ */ diff --git a/drivers/scsi/isci/core/sci_status.h b/drivers/scsi/isci/core/sci_status.h new file mode 100644 index 0000000..72b6108 --- /dev/null +++ b/drivers/scsi/isci/core/sci_status.h @@ -0,0 +1,409 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_STATUS_H_ +#define _SCI_STATUS_H_ + +/** + * This file contains all of the return status codes utilized across the + * various sub-components in SCI. + * + * + */ + + +/** + * enum _SCI_STATUS - This is the general return status enumeration for non-IO, + * non-task management related SCI interface methods. + * + * + */ +enum sci_status { + /** + * This member indicates successful completion. + */ + SCI_SUCCESS = 0, + + /** + * This value indicates that the calling method completed successfully, + * but that the IO may have completed before having it's start method + * invoked. This occurs during SAT translation for requests that do + * not require an IO to the target or for any other requests that may + * be completed without having to submit IO. + */ + SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + + /** + * This Value indicates that the SCU hardware returned an early response + * because the io request specified more data than is returned by the + * target device (mode pages, inquiry data, etc.). The completion routine + * will handle this case to get the actual number of bytes transferred. + */ + SCI_SUCCESS_IO_DONE_EARLY, + + /** + * This member indicates that the object for which a state change is + * being requested is already in said state. + */ + SCI_WARNING_ALREADY_IN_STATE, + + /** + * This member indicates interrupt coalescence timer may cause SAS + * specification compliance issues (i.e. SMP target mode response + * frames must be returned within 1.9 milliseconds). + */ + SCI_WARNING_TIMER_CONFLICT, + + /** + * This field indicates a sequence of action is not completed yet. Mostly, + * this status is used when multiple ATA commands are needed in a SATI translation. + */ + SCI_WARNING_SEQUENCE_INCOMPLETE, + + /** + * This member indicates that there was a general failure. + */ + SCI_FAILURE, + + /** + * This member indicates that the SCI implementation is unable to complete + * an operation due to a critical flaw the prevents any further operation + * (i.e. an invalid pointer). + */ + SCI_FATAL_ERROR, + + /** + * This member indicates the calling function failed, because the state + * of the controller is in a state that prevents successful completion. + */ + SCI_FAILURE_INVALID_STATE, + + /** + * This member indicates the calling function failed, because there is + * insufficient resources/memory to complete the request. + */ + SCI_FAILURE_INSUFFICIENT_RESOURCES, + + /** + * This member indicates the calling function failed, because the + * controller object required for the operation can't be located. + */ + SCI_FAILURE_CONTROLLER_NOT_FOUND, + + /** + * This member indicates the calling function failed, because the + * discovered controller type is not supported by the library. + */ + SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE, + + /** + * This member indicates the calling function failed, because the + * requested initialization data version isn't supported. + */ + SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION, + + /** + * This member indicates the calling function failed, because the + * requested configuration of SAS Phys into SAS Ports is not supported. + */ + SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION, + + /** + * This member indicates the calling function failed, because the + * requested protocol is not supported by the remote device, port, + * or controller. + */ + SCI_FAILURE_UNSUPPORTED_PROTOCOL, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE, + + /** + * This member indicates the calling function failed, because the + * device already exists. + */ + SCI_FAILURE_DEVICE_EXISTS, + + /** + * This member indicates the calling function failed, because adding + * a phy to the object is not possible. + */ + SCI_FAILURE_ADDING_PHY_UNSUPPORTED, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD, + + /** + * This member indicates the calling function failed, because the SCI + * implementation does not support the supplied time limit. + */ + SCI_FAILURE_UNSUPPORTED_TIME_LIMIT, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Phy. + */ + SCI_FAILURE_INVALID_PHY, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Port. + */ + SCI_FAILURE_INVALID_PORT, + + /** + * This member indicates the calling method was partly successful + * The port was reset but not all phys in port are operational + */ + SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS, + + /** + * This member indicates that calling method failed + * The port reset did not complete because none of the phys are operational + */ + SCI_FAILURE_RESET_PORT_FAILURE, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified remote device. + */ + SCI_FAILURE_INVALID_REMOTE_DEVICE, + + /** + * This member indicates the calling method failed, because the remote + * device is in a bad state and requires a reset. + */ + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain or support the specified IO tag. + */ + SCI_FAILURE_INVALID_IO_TAG, + + /** + * This member indicates that the operation failed and the user should + * check the response data associated with the IO. + */ + SCI_FAILURE_IO_RESPONSE_VALID, + + /** + * This member indicates that the operation failed, the failure is + * controller implementation specific, and the response data associated + * with the request is not valid. You can query for the controller + * specific error information via scic_controller_get_request_status() + */ + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + + /** + * This member indicated that the operation failed because the + * user requested this IO to be terminated. + */ + SCI_FAILURE_IO_TERMINATED, + + /** + * This member indicates that the operation failed and the associated + * request requires a SCSI abort task to be sent to the target. + */ + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + + /** + * This member indicates that the operation failed because the supplied + * device could not be located. + */ + SCI_FAILURE_DEVICE_NOT_FOUND, + + /** + * This member indicates that the operation failed because the + * objects association is required and is not correctly set. + */ + SCI_FAILURE_INVALID_ASSOCIATION, + + /** + * This member indicates that the operation failed, because a timeout + * occurred. + */ + SCI_FAILURE_TIMEOUT, + + /** + * This member indicates that the operation failed, because the user + * specified a value that is either invalid or not supported. + */ + SCI_FAILURE_INVALID_PARAMETER_VALUE, + + /** + * This value indicates that the operation failed, because the number + * of messages (MSI-X) is not supported. + */ + SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT, + + /** + * This value indicates that the method failed due to a lack of + * available NCQ tags. + */ + SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + + /** + * This value indicates that a protocol violation has occurred on the + * link. + */ + SCI_FAILURE_PROTOCOL_VIOLATION, + + /** + * This value indicates a failure condition that retry may help to clear. + */ + SCI_FAILURE_RETRY_REQUIRED, + + /** + * This field indicates the retry limit was reached when a retry is attempted + */ + SCI_FAILURE_RETRY_LIMIT_REACHED, + + /** + * This member indicates the calling method was partly successful. + * Mostly, this status is used when a LUN_RESET issued to an expander attached + * STP device in READY NCQ substate needs to have RNC suspended/resumed + * before posting TC. + */ + SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS, + + /** + * This field indicates an illegal phy connection based on the routing attribute + * of both expander phy attached to each other. + */ + SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION, + + /** + * This field indicates a CONFIG ROUTE INFO command has a response with function result + * INDEX DOES NOT EXIST, usually means exceeding max route index. + */ + SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX, + + /** + * This value indicates that an unsupported PCI device ID has been + * specified. This indicates that attempts to invoke + * scic_library_allocate_controller() will fail. + */ + SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID + +}; + +/** + * enum _SCI_IO_STATUS - This enumeration depicts all of the possible IO + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Add the API to retrieve the SCU status from the core. Check to see that the + * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL + * - SCI_IO_FAILURE_INVALID_IO_TAG + */ +enum sci_io_status { + SCI_IO_SUCCESS = SCI_SUCCESS, + SCI_IO_FAILURE = SCI_FAILURE, + SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY, + SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION, + + SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED, + SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED, + SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE +}; + +/** + * enum _SCI_TASK_STATUS - This enumeration depicts all of the possible task + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Check to see that the following status are properly handled: + */ +enum sci_task_status { + SCI_TASK_SUCCESS = SCI_SUCCESS, + SCI_TASK_FAILURE = SCI_FAILURE, + SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG, + SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + + SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS + +}; + + +#endif /* _SCI_STATUS_H_ */ + diff --git a/drivers/scsi/isci/core/sci_types.h b/drivers/scsi/isci/core/sci_types.h new file mode 100644 index 0000000..431735d --- /dev/null +++ b/drivers/scsi/isci/core/sci_types.h @@ -0,0 +1,88 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_TYPES_H_ +#define _SCI_TYPES_H_ + +#include + +#define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \ + ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) + +#define SCI_INVALID_HANDLE 0x0 + +/** + * The SCI_LIBRARY_HANDLE_T will be utilized by SCI users as an opaque handle + * for the SCI Library object. + * + * SCI_LIBRARY_HANDLE_T + */ +typedef void *SCI_LIBRARY_HANDLE_T; + + +typedef enum { + SCI_IO_REQUEST_DATA_IN = 0, /* Read operation */ + SCI_IO_REQUEST_DATA_OUT, /* Write operation */ + SCI_IO_REQUEST_NO_DATA +} SCI_IO_REQUEST_DATA_DIRECTION; + + +enum sci_controller_mode { + SCI_MODE_SPEED, /* Optimized for performance */ + SCI_MODE_SIZE /* Optimized for memory use */ +}; + +#endif /* _SCI_TYPES_H_ */ + diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c new file mode 100644 index 0000000..5cdd96f --- /dev/null +++ b/drivers/scsi/isci/core/sci_util.c @@ -0,0 +1,70 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "sci_util.h" + +void scic_word_copy_with_swap( + u32 *destination, + u32 *source, + u32 word_count) +{ + while (word_count--) { + *destination = SCIC_SWAP_DWORD(*source); + + source++; + destination++; + } +} + diff --git a/drivers/scsi/isci/core/sci_util.h b/drivers/scsi/isci/core/sci_util.h new file mode 100644 index 0000000..67e2bad --- /dev/null +++ b/drivers/scsi/isci/core/sci_util.h @@ -0,0 +1,138 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_UTIL_H_ +#define _SCI_UTIL_H_ + +#include "sci_types.h" + +/** + * SCIC_SWAP_DWORD() - + * + * Normal byte swap macro + */ +#define SCIC_SWAP_DWORD(x) \ + (\ + (((x) >> 24) & 0x000000FF) \ + | (((x) >> 8) & 0x0000FF00) \ + | (((x) << 8) & 0x00FF0000) \ + | (((x) << 24) & 0xFF000000) \ + ) + +#define SCIC_BUILD_DWORD(char_buffer) \ + (\ + ((char_buffer)[0] << 24) \ + | ((char_buffer)[1] << 16) \ + | ((char_buffer)[2] << 8) \ + | ((char_buffer)[3]) \ + ) + +#define SCI_FIELD_OFFSET(type, field) ((unsigned long)&(((type *)0)->field)) + +/** + * sci_physical_address_add() - + * + * This macro simply performs addition on an dma_addr_t type. The + * lower u32 value is "clipped" or "wrapped" back through 0. When this occurs + * the upper 32-bits are incremented by 1. + */ +#define sci_physical_address_add(physical_address, value) \ + { \ + u32 lower = lower_32_bits((physical_address)); \ + u32 upper = upper_32_bits((physical_address)); \ + \ + if (lower + (value) < lower) \ + upper += 1; \ + \ + lower += (value); \ + sci_cb_make_physical_address(physical_address, upper, lower); \ + } + +/** + * sci_physical_address_subtract() - + * + * This macro simply performs subtraction on an dma_addr_t type. The + * lower u32 value is "clipped" or "wrapped" back through 0. When this occurs + * the upper 32-bits are decremented by 1. + */ +#define sci_physical_address_subtract(physical_address, value) \ + { \ + u32 lower = lower_32_bits((physical_address)); \ + u32 upper = upper_32_bits((physical_address)); \ + \ + if (lower - (value) > lower) \ + upper -= 1; \ + \ + lower -= (value); \ + sci_cb_make_physical_address(physical_address, upper, lower); \ + } + +/** + * scic_word_copy_with_swap() - Copy the data from source to destination and + * swap the bytes during the copy. + * @destination: This parameter specifies the destination address to which the + * data is to be copied. + * @source: This parameter specifies the source address from which data is to + * be copied. + * @word_count: This parameter specifies the number of 32-bit words to copy and + * byte swap. + * + */ +void scic_word_copy_with_swap( + u32 *destination, + u32 *source, + u32 word_count); + +#endif /* _SCI_UTIL_H_ */ diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h new file mode 100644 index 0000000..4c16a50 --- /dev/null +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -0,0 +1,347 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_USER_PARAMETERS_H_ +#define _SCIC_SDS_USER_PARAMETERS_H_ + +/** + * This file contains all of the structure definitions and interface methods + * that can be called by a SCIC user on the SCU Driver Standard + * (struct scic_sds_user_parameters) user parameter block. + * + * + */ + + +#include "sci_types.h" +#include "sci_status.h" +#include "intel_sas.h" +#include "sci_controller_constants.h" + +struct scic_sds_controller; + +/** + * + * + * SCIC_SDS_PARM_PHY_SPEED These constants define the speeds utilized for a + * phy/port. + */ +#define SCIC_SDS_PARM_NO_SPEED 0 + +/** + * + * + * This value of 1 indicates generation 1 (i.e. 1.5 Gb/s). + */ +#define SCIC_SDS_PARM_GEN1_SPEED 1 + +/** + * + * + * This value of 2 indicates generation 2 (i.e. 3.0 Gb/s). + */ +#define SCIC_SDS_PARM_GEN2_SPEED 2 + +/** + * + * + * This value of 3 indicates generation 3 (i.e. 6.0 Gb/s). + */ +#define SCIC_SDS_PARM_GEN3_SPEED 3 + +/** + * + * + * For range checks, the max speed generation + */ +#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED + +/** + * struct scic_sds_user_parameters - This structure delineates the various user + * parameters that can be changed by the core user. + * + * + */ +struct scic_sds_user_parameters { + struct { + /** + * This field specifies the NOTIFY (ENABLE SPIN UP) primitive + * insertion frequency for this phy index. + */ + u32 notify_enable_spin_up_insertion_frequency; + + /** + * This method specifies the number of transmitted DWORDs within which + * to transmit a single ALIGN primitive. This value applies regardless + * of what type of device is attached or connection state. A value of + * 0 indicates that no ALIGN primitives will be inserted. + */ + u16 align_insertion_frequency; + + /** + * This method specifies the number of transmitted DWORDs within which + * to transmit 2 ALIGN primitives. This applies for SAS connections + * only. A minimum value of 3 is required for this field. + */ + u16 in_connection_align_insertion_frequency; + + /** + * This field indicates the maximum speed generation to be utilized + * by phys in the supplied port. + * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s). + * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s). + * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s). + */ + u8 max_speed_generation; + + } phys[SCI_MAX_PHYS]; + + /** + * This field specifies the maximum number of direct attached devices + * that can have power supplied to them simultaneously. + */ + u8 max_number_concurrent_device_spin_up; + + /** + * This field specifies the number of seconds to allow a phy to consume + * power before yielding to another phy. + * + */ + u8 phy_spin_up_delay_interval; + + /** + * These timer values specifies how long a link will remain open with no + * activity in increments of a microsecond, it can be in increments of + * 100 microseconds if the upper most bit is set. + * + */ + u16 stp_inactivity_timeout; + u16 ssp_inactivity_timeout; + + /** + * These timer values specifies how long a link will remain open in increments + * of 100 microseconds. + * + */ + u16 stp_max_occupancy_timeout; + u16 ssp_max_occupancy_timeout; + + /** + * This timer value specifies how long a link will remain open with no + * outbound traffic in increments of a microsecond. + * + */ + u8 no_outbound_task_timeout; + +}; + +/** + * This structure/union specifies the various different user parameter sets + * available. Each type is specific to a hardware controller version. + * + * union scic_user_parameters + */ +union scic_user_parameters { + /** + * This field specifies the user parameters specific to the + * Storage Controller Unit (SCU) Driver Standard (SDS) version + * 1. + */ + struct scic_sds_user_parameters sds1; + +}; + + +/** + * + * + * SCIC_SDS_OEM_PHY_MASK These constants define the valid values for phy_mask + */ + +/** + * + * + * This is the min value assignable to a port's phy mask + */ +#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0 + +/** + * + * + * This is the max value assignable to a port's phy mask + */ +#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF + +/** + * struct scic_sds_oem_parameters - This structure delineates the various OEM + * parameters that must be set the core user. + * + * + */ +struct scic_sds_oem_parameters { + struct { + /** + * This field indicates whether Spread Spectrum Clocking (SSC) + * should be enabled or disabled. + */ + bool do_enable_ssc; + + } controller; + + struct { + /** + * This field specifies the phys to be contained inside a port. + * The bit position in the mask specifies the index of the phy + * to be contained in the port. Multiple bits (i.e. phys) + * can be contained in a single port. + */ + u8 phy_mask; + + } ports[SCI_MAX_PORTS]; + + struct { + /** + * This field specifies the SAS address to be transmitted on + * for this phy index. + */ + struct sci_sas_address sas_address; + + } phys[SCI_MAX_PHYS]; + +}; + +/** + * This structure/union specifies the various different OEM parameter sets + * available. Each type is specific to a hardware controller version. + * + * union scic_oem_parameters + */ +union scic_oem_parameters { + /** + * This field specifies the OEM parameters specific to the + * Storage Controller Unit (SCU) Driver Standard (SDS) version + * 1. + */ + struct scic_sds_oem_parameters sds1; + +}; + +/** + * scic_user_parameters_set() - This method allows the user to attempt to + * change the user parameters utilized by the controller. + * @controller: This parameter specifies the controller on which to set the + * user parameters. + * @user_parameters: This parameter specifies the USER_PARAMETERS object + * containing the potential new values. + * + * Indicate if the update of the user parameters was successful. SCI_SUCCESS + * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE + * This value is returned if the attempt to change the user parameter failed, + * because changing one of the parameters is not currently allowed. + * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user + * supplied an invalid interrupt coalescence time, spin up delay interval, etc. + */ +enum sci_status scic_user_parameters_set( + struct scic_sds_controller *controller, + union scic_user_parameters *user_parameters); + +/** + * scic_user_parameters_get() - This method allows the user to retrieve the + * user parameters utilized by the controller. + * @controller: This parameter specifies the controller on which to set the + * user parameters. + * @user_parameters: This parameter specifies the USER_PARAMETERS object into + * which the framework shall save it's parameters. + * + */ +void scic_user_parameters_get( + struct scic_sds_controller *controller, + union scic_user_parameters *user_parameters); + +/** + * scic_oem_parameters_set() - This method allows the user to attempt to change + * the OEM parameters utilized by the controller. + * @controller: This parameter specifies the controller on which to set the + * user parameters. + * @oem_parameters: This parameter specifies the OEM parameters object + * containing the potential new values. + * + * Indicate if the update of the user parameters was successful. SCI_SUCCESS + * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE + * This value is returned if the attempt to change the user parameter failed, + * because changing one of the parameters is not currently allowed. + * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user + * supplied an unsupported value for one of the OEM parameters. + */ +enum sci_status scic_oem_parameters_set( + struct scic_sds_controller *controller, + union scic_oem_parameters *oem_parameters); + +/** + * scic_oem_parameters_get() - This method allows the user to retreive the OEM + * parameters utilized by the controller. + * @controller: This parameter specifies the controller on which to set the + * user parameters. + * @oem_parameters: This parameter specifies the OEM parameters object in which + * to write the core's OEM parameters. + * + */ +void scic_oem_parameters_get( + struct scic_sds_controller *controller, + union scic_oem_parameters *oem_parameters); + + +#endif /* _SCIC_SDS_USER_PARAMETERS_H_ */ + diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h new file mode 100644 index 0000000..756b14f --- /dev/null +++ b/drivers/scsi/isci/core/scic_controller.h @@ -0,0 +1,586 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_CONTROLLER_H_ +#define _SCIC_CONTROLLER_H_ + +/** + * This file contains all of the interface methods that can be called by an + * SCIC user on a controller object. + * + * + */ + + +#include "sci_types.h" +#include "sci_status.h" +#include "sci_controller.h" +#include "scic_config_parameters.h" + +struct scic_sds_request; +struct scic_sds_phy; +struct scic_sds_port; +struct scic_sds_remote_device; + +/** + * enum _SCIC_INTERRUPT_TYPE - This enumeration depicts the various types of + * interrupts that are potentially supported by a SCI Core implementation. + * + * + */ +enum scic_interrupt_type { + SCIC_LEGACY_LINE_INTERRUPT_TYPE, + SCIC_MSIX_INTERRUPT_TYPE, + + /** + * This enumeration value indicates the use of polling. + */ + SCIC_NO_INTERRUPTS + +}; + +/** + * This method is called by the SCI user in order to have the SCI + * implementation handle the interrupt. This method performs minimal + * processing to allow for streamlined interrupt time usage. + * + * SCIC_CONTROLLER_INTERRUPT_HANDLER true: returned if there is an interrupt to + * process and it was processed. false: returned if no interrupt was processed. + */ +typedef bool (*SCIC_CONTROLLER_INTERRUPT_HANDLER)( + struct scic_sds_controller *controller + ); + +/** + * This method is called by the SCI user to process completions generated as a + * result of a previously handled interrupt. This method will result in the + * completion of IO requests and handling of other controller generated + * events. This method should be called some time after the interrupt + * handler. + * + * Most, if not all, of the user callback APIs are invoked from within this + * API. As a result, the user should be cognizent of the operating level at + * which they invoke this API. + */ +typedef void (*SCIC_CONTROLLER_COMPLETION_HANDLER)( + struct scic_sds_controller *controller + ); + +/** + * struct scic_controller_handler_methods - This structure contains an + * interrupt handler and completion handler function pointers. + * + * + */ +struct scic_controller_handler_methods { + SCIC_CONTROLLER_INTERRUPT_HANDLER interrupt_handler; + SCIC_CONTROLLER_COMPLETION_HANDLER completion_handler; + +}; + +/** + * scic_controller_construct() - This method will attempt to construct a + * controller object utilizing the supplied parameter information. + * @c: This parameter specifies the controller to be constructed. + * @scu_base: mapped base address of the scu registers + * @smu_base: mapped base address of the smu registers + * + * Indicate if the controller was successfully constructed or if it failed in + * some way. SCI_SUCCESS This value is returned if the controller was + * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned + * if the interrupt coalescence timer may cause SAS compliance issues for SMP + * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE + * This value is returned if the controller does not support the supplied type. + * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the + * controller does not support the supplied initialization data version. + */ +enum sci_status scic_controller_construct(struct scic_sds_controller *c, + void __iomem *scu_base, + void __iomem *smu_base); + +/** + * scic_controller_enable_interrupts() - This method will enable all controller + * interrupts. + * @controller: This parameter specifies the controller for which to enable + * interrupts. + * + */ +void scic_controller_enable_interrupts( + struct scic_sds_controller *controller); + +/** + * scic_controller_disable_interrupts() - This method will disable all + * controller interrupts. + * @controller: This parameter specifies the controller for which to disable + * interrupts. + * + */ +void scic_controller_disable_interrupts( + struct scic_sds_controller *controller); + +/** + * scic_controller_get_handler_methods() - This method will return provide + * function pointers for the interrupt handler and completion handler. The + * interrupt handler is expected to be invoked at interrupt time. The + * completion handler is scheduled to run as a result of the interrupt + * handler. The completion handler performs the bulk work for processing + * silicon events. + * @interrupt_type: This parameter informs the core which type of + * interrupt/completion methods are being requested. These are the types: + * SCIC_LEGACY_LINE_INTERRUPT_TYPE, SCIC_MSIX_INTERRUPT_TYPE, + * SCIC_NO_INTERRUPTS (POLLING) + * @message_count: This parameter informs the core the number of MSI-X messages + * to be utilized. This parameter must be 0 when requesting legacy line + * based handlers. + * @handler_methods: The caller provides a pointer to a buffer of type + * struct scic_controller_handler_methods. The size depends on the combination of + * the interrupt_type and message_count input parameters: + * SCIC_LEGACY_LINE_INTERRUPT_TYPE: - size = + * sizeof(struct scic_controller_handler_methods) SCIC_MSIX_INTERRUPT_TYPE: + * sizeof(struct scic_controller_handler_methods) + * @handler_methods: SCIC fills out the caller's buffer with the appropriate + * interrupt and completion handlers based on the info provided in the + * interrupt_type and message_count input parameters. For + * SCIC_LEGACY_LINE_INTERRUPT_TYPE, the buffer receives a single + * struct scic_controller_handler_methods element regardless that the + * message_count parameter is zero. For SCIC_MSIX_INTERRUPT_TYPE, the buffer + * receives an array of elements of type struct scic_controller_handler_methods + * where the array size is equivalent to the message_count parameter. The + * array is zero-relative where entry zero corresponds to message-vector + * zero, entry one corresponds to message-vector one, and so forth. + * + * Indicate if the handler retrieval operation was successful. SCI_SUCCESS This + * value is returned if retrieval succeeded. + * SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT This value is returned if the user + * supplied an unsupported number of MSI-X messages. For legacy line interrupts + * the only valid value is 0. + */ +enum sci_status scic_controller_get_handler_methods( + enum scic_interrupt_type interrupt_type, + u16 message_count, + struct scic_controller_handler_methods *handler_methods); + +/** + * scic_controller_initialize() - This method will initialize the controller + * hardware managed by the supplied core controller object. This method + * will bring the physical controller hardware out of reset and enable the + * core to determine the capabilities of the hardware being managed. Thus, + * the core controller can determine it's exact physical (DMA capable) + * memory requirements. + * @controller: This parameter specifies the controller to be initialized. + * + * The SCI Core user must have called scic_controller_construct() on the + * supplied controller object previously. Indicate if the controller was + * successfully initialized or if it failed in some way. SCI_SUCCESS This value + * is returned if the controller hardware was successfully initialized. + */ +enum sci_status scic_controller_initialize( + struct scic_sds_controller *controller); + +/** + * scic_controller_get_suggested_start_timeout() - This method returns the + * suggested scic_controller_start() timeout amount. The user is free to + * use any timeout value, but this method provides the suggested minimum + * start timeout value. The returned value is based upon empirical + * information determined as a result of interoperability testing. + * @controller: the handle to the controller object for which to return the + * suggested start timeout. + * + * This method returns the number of milliseconds for the suggested start + * operation timeout. + */ +u32 scic_controller_get_suggested_start_timeout( + struct scic_sds_controller *controller); + +/** + * scic_controller_start() - This method will start the supplied core + * controller. This method will start the staggered spin up operation. The + * SCI User completion callback is called when the following conditions are + * met: -# the return status of this method is SCI_SUCCESS. -# after all of + * the phys have successfully started or been given the opportunity to start. + * @controller: the handle to the controller object to start. + * @timeout: This parameter specifies the number of milliseconds in which the + * start operation should complete. + * + * The SCI Core user must have filled in the physical memory descriptor + * structure via the sci_controller_get_memory_descriptor_list() method. The + * SCI Core user must have invoked the scic_controller_initialize() method + * prior to invoking this method. The controller must be in the INITIALIZED or + * STARTED state. Indicate if the controller start method succeeded or failed + * in some way. SCI_SUCCESS if the start operation succeeded. + * SCI_WARNING_ALREADY_IN_STATE if the controller is already in the STARTED + * state. SCI_FAILURE_INVALID_STATE if the controller is not either in the + * INITIALIZED or STARTED states. SCI_FAILURE_INVALID_MEMORY_DESCRIPTOR if + * there are inconsistent or invalid values in the supplied + * struct sci_physical_memory_descriptor array. + */ +enum sci_status scic_controller_start( + struct scic_sds_controller *controller, + u32 timeout); + +/** + * scic_controller_stop() - This method will stop an individual controller + * object.This method will invoke the associated user callback upon + * completion. The completion callback is called when the following + * conditions are met: -# the method return status is SCI_SUCCESS. -# the + * controller has been quiesced. This method will ensure that all IO + * requests are quiesced, phys are stopped, and all additional operation by + * the hardware is halted. + * @controller: the handle to the controller object to stop. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * The controller must be in the STARTED or STOPPED state. Indicate if the + * controller stop method succeeded or failed in some way. SCI_SUCCESS if the + * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the + * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the + * controller is not either in the STARTED or STOPPED states. + */ +enum sci_status scic_controller_stop( + struct scic_sds_controller *controller, + u32 timeout); + +/** + * scic_controller_reset() - This method will reset the supplied core + * controller regardless of the state of said controller. This operation is + * considered destructive. In other words, all current operations are wiped + * out. No IO completions for outstanding devices occur. Outstanding IO + * requests are not aborted or completed at the actual remote device. + * @controller: the handle to the controller object to reset. + * + * Indicate if the controller reset method succeeded or failed in some way. + * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if + * the controller reset operation is unable to complete. + */ +enum sci_status scic_controller_reset( + struct scic_sds_controller *controller); + +/** + * scic_controller_start_io() - This method is called by the SCI user to + * send/start an IO request. If the method invocation is successful, then + * the IO request has been queued to the hardware for processing. + * @controller: the handle to the controller object for which to start an IO + * request. + * @remote_device: the handle to the remote device object for which to start an + * IO request. + * @io_request: the handle to the io request object to start. + * @io_tag: This parameter specifies a previously allocated IO tag that the + * user desires to be utilized for this request. This parameter is optional. + * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value + * for this parameter. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a + * result, it is expected the user will have set the NCQ tag field in the host + * to device register FIS prior to calling this method. There is also a + * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking + * the scic_controller_start_io() method. scic_controller_allocate_tag() for + * more information on allocating a tag. Indicate if the controller + * successfully started the IO request. SCI_IO_SUCCESS if the IO request was + * successfully started. Determine the failure situations and return values. + */ +enum sci_io_status scic_controller_start_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request, + u16 io_tag); + + +/** + * scic_controller_start_task() - This method is called by the SCIC user to + * send/start a framework task management request. + * @controller: the handle to the controller object for which to start the task + * management request. + * @remote_device: the handle to the remote device object for which to start + * the task management request. + * @task_request: the handle to the task request object to start. + * @io_tag: This parameter specifies a previously allocated IO tag that the + * user desires to be utilized for this request. Note this not the io_tag + * of the request being managed. It is to be utilized for the task request + * itself. This parameter is optional. The user is allowed to supply + * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - The user must synchronize this task with completion + * queue processing. If they are not synchronized then it is possible for the + * io requests that are being managed by the task request can complete before + * starting the task request. scic_controller_allocate_tag() for more + * information on allocating a tag. Indicate if the controller successfully + * started the IO request. SCI_TASK_SUCCESS if the task request was + * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is + * returned if there is/are task(s) outstanding that require termination or + * completion before this request can succeed. + */ +enum sci_task_status scic_controller_start_task( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *task_request, + u16 io_tag); + +/** + * scic_controller_complete_task() - This method will perform core specific + * completion operations for task management request. After this method is + * invoked, the user should consider the task request as invalid until it is + * properly reused (i.e. re-constructed). + * @controller: The handle to the controller object for which to complete the + * task management request. + * @remote_device: The handle to the remote device object for which to complete + * the task management request. + * @task_request: the handle to the task management request object to complete. + * + * Indicate if the controller successfully completed the task management + * request. SCI_SUCCESS if the completion process was successful. + */ +enum sci_status scic_controller_complete_task( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *task_request); + + +/** + * scic_controller_terminate_request() - This method is called by the SCI Core + * user to terminate an ongoing (i.e. started) core IO request. This does + * not abort the IO request at the target, but rather removes the IO request + * from the host controller. + * @controller: the handle to the controller object for which to terminate a + * request. + * @remote_device: the handle to the remote device object for which to + * terminate a request. + * @request: the handle to the io or task management request object to + * terminate. + * + * Indicate if the controller successfully began the terminate process for the + * IO request. SCI_SUCCESS if the terminate process was successfully started + * for the request. Determine the failure situations and return values. + */ +enum sci_status scic_controller_terminate_request( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *request); + +/** + * scic_controller_complete_io() - This method will perform core specific + * completion operations for an IO request. After this method is invoked, + * the user should consider the IO request as invalid until it is properly + * reused (i.e. re-constructed). + * @controller: The handle to the controller object for which to complete the + * IO request. + * @remote_device: The handle to the remote device object for which to complete + * the IO request. + * @io_request: the handle to the io request object to complete. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI + * Core user, using the scic_controller_allocate_io_tag() method, then it is + * the responsibility of the caller to invoke the scic_controller_free_io_tag() + * method to free the tag (i.e. this method will not free the IO tag). Indicate + * if the controller successfully completed the IO request. SCI_SUCCESS if the + * completion process was successful. + */ +enum sci_status scic_controller_complete_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request); + + +/** + * scic_controller_get_port_handle() - This method simply provides the user + * with a unique handle for a given SAS/SATA core port index. + * @controller: This parameter represents the handle to the controller object + * from which to retrieve a port (SAS or SATA) handle. + * @port_index: This parameter specifies the port index in the controller for + * which to retrieve the port handle. 0 <= port_index < maximum number of + * phys. + * @port_handle: This parameter specifies the retrieved port handle to be + * provided to the caller. + * + * Indicate if the retrieval of the port handle was successful. SCI_SUCCESS + * This value is returned if the retrieval was successful. + * SCI_FAILURE_INVALID_PORT This value is returned if the supplied port id is + * not in the supported range. + */ +enum sci_status scic_controller_get_port_handle( + struct scic_sds_controller *controller, + u8 port_index, + struct scic_sds_port **port_handle); + +/** + * scic_controller_get_phy_handle() - This method simply provides the user with + * a unique handle for a given SAS/SATA phy index/identifier. + * @controller: This parameter represents the handle to the controller object + * from which to retrieve a phy (SAS or SATA) handle. + * @phy_index: This parameter specifies the phy index in the controller for + * which to retrieve the phy handle. 0 <= phy_index < maximum number of phys. + * @phy_handle: This parameter specifies the retrieved phy handle to be + * provided to the caller. + * + * Indicate if the retrieval of the phy handle was successful. SCI_SUCCESS This + * value is returned if the retrieval was successful. SCI_FAILURE_INVALID_PHY + * This value is returned if the supplied phy id is not in the supported range. + */ +enum sci_status scic_controller_get_phy_handle( + struct scic_sds_controller *controller, + u8 phy_index, + struct scic_sds_phy **phy_handle); + +/** + * scic_controller_allocate_io_tag() - This method will allocate a tag from the + * pool of free IO tags. Direct allocation of IO tags by the SCI Core user + * is optional. The scic_controller_start_io() method will allocate an IO + * tag if this method is not utilized and the tag is not supplied to the IO + * construct routine. Direct allocation of IO tags may provide additional + * performance improvements in environments capable of supporting this usage + * model. Additionally, direct allocation of IO tags also provides + * additional flexibility to the SCI Core user. Specifically, the user may + * retain IO tags across the lives of multiple IO requests. + * @controller: the handle to the controller object for which to allocate the + * tag. + * + * IO tags are a protected resource. It is incumbent upon the SCI Core user to + * ensure that each of the methods that may allocate or free available IO tags + * are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). An unsigned integer representing an available IO tag. + * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no + * currently available tags to be allocated. All return other values indicate a + * legitimate tag. + */ +u16 scic_controller_allocate_io_tag( + struct scic_sds_controller *controller); + +/** + * scic_controller_free_io_tag() - This method will free an IO tag to the pool + * of free IO tags. This method provides the SCI Core user more flexibility + * with regards to IO tags. The user may desire to keep an IO tag after an + * IO request has completed, because they plan on re-using the tag for a + * subsequent IO request. This method is only legal if the tag was + * allocated via scic_controller_allocate_io_tag(). + * @controller: This parameter specifies the handle to the controller object + * for which to free/return the tag. + * @io_tag: This parameter represents the tag to be freed to the pool of + * available tags. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI + * Core user, using the scic_controller_allocate_io_tag() method, then it is + * the responsibility of the caller to invoke this method to free the tag. This + * method returns an indication of whether the tag was successfully put back + * (freed) to the pool of available tags. SCI_SUCCESS This return value + * indicates the tag was successfully placed into the pool of available IO + * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag + * is not a valid IO tag value. + */ +enum sci_status scic_controller_free_io_tag( + struct scic_sds_controller *controller, + u16 io_tag); + + + + +/** + * scic_controller_set_mode() - This method allows the user to configure the + * SCI core into either a performance mode or a memory savings mode. + * @controller: This parameter represents the handle to the controller object + * for which to update the operating mode. + * @mode: This parameter specifies the new mode for the controller. + * + * Indicate if the user successfully change the operating mode of the + * controller. SCI_SUCCESS The user successfully updated the mode. + */ +enum sci_status scic_controller_set_mode( + struct scic_sds_controller *controller, + enum sci_controller_mode mode); + + +/** + * scic_controller_set_interrupt_coalescence() - This method allows the user to + * configure the interrupt coalescence. + * @controller: This parameter represents the handle to the controller object + * for which its interrupt coalesce register is overridden. + * @coalesce_number: Used to control the number of entries in the Completion + * Queue before an interrupt is generated. If the number of entries exceed + * this number, an interrupt will be generated. The valid range of the input + * is [0, 256]. A setting of 0 results in coalescing being disabled. + * @coalesce_timeout: Timeout value in microseconds. The valid range of the + * input is [0, 2700000] . A setting of 0 is allowed and results in no + * interrupt coalescing timeout. + * + * Indicate if the user successfully set the interrupt coalesce parameters. + * SCI_SUCCESS The user successfully updated the interrutp coalescence. + * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. + */ +enum sci_status scic_controller_set_interrupt_coalescence( + struct scic_sds_controller *controller, + u32 coalesce_number, + u32 coalesce_timeout); + +struct device; +struct scic_sds_controller *scic_controller_alloc(struct device *dev); + + +#endif /* _SCIC_CONTROLLER_H_ */ + diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h new file mode 100644 index 0000000..7378f33 --- /dev/null +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -0,0 +1,512 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_IO_REQUEST_H_ +#define _SCIC_IO_REQUEST_H_ + +/** + * This file contains the structures and interface methods that can be + * referenced and used by the SCI user for the SCI IO request object. + * + * Determine the failure situations and return values. + */ + + +#include "sci_types.h" +#include "sci_status.h" +#include "intel_sas.h" + +struct scic_sds_request; +struct scic_sds_remote_device; +struct scic_sds_controller; + +/** + * struct scic_io_parameters - This structure contains additional optional + * parameters for SSP IO requests. These parameters are utilized with the + * scic_io_request_construct_advanced_ssp() method. + * + * Add Block-guard/DIF, TLR + */ +struct scic_io_parameters { + /** + * This sub-structure contains SCSI specific features (for use with SSP + * IO requests). + */ + struct { + /** + * Data Integrity Format (DIF) is also known as protection information + * or block-guard. This sub-structure contains DIF specific feature + * information for SSP IO requests. + */ + struct { + void *placeholder; + } dif; + + /** + * Transport Layer Retries (TLR) is an SSP protocol specific feature. + * This sub-structure contains Transport Layer Retries (TLR) specific + * feature information for SSP IO requests. + */ + struct { + void *placeholder; + } tlr; + + } scsi; + +}; + +/** + * struct scic_passthru_request_callbacks - This structure contains the pointer + * to the callback functions for constructing the passthrough request common + * to SSP, SMP and STP. This structure must be set by the win sci layer + * before the passthrough build is called + * + * + */ +struct scic_passthru_request_callbacks { + /** + * Function pointer to get the phy identifier for passthrough request. + */ + u32 (*scic_cb_passthru_get_phy_identifier)(void *, u8 *); + /** + * Function pointer to get the port identifier for passthrough request. + */ + u32 (*scic_cb_passthru_get_port_identifier)(void *, u8 *); + /** + * Function pointer to get the connection rate for passthrough request. + */ + u32 (*scic_cb_passthru_get_connection_rate)(void *, void *); + /** + * Function pointer to get the destination sas address for passthrough request. + */ + void (*scic_cb_passthru_get_destination_sas_address)(void *, u8 **); + /** + * Function pointer to get the transfer length for passthrough request. + */ + u32 (*scic_cb_passthru_get_transfer_length)(void *); + /** + * Function pointer to get the data direction for passthrough request. + */ + u32 (*scic_cb_passthru_get_data_direction)(void *); + +}; + +/** + * struct scic_ssp_passthru_request_callbacks - This structure contains the + * pointer to the callback functions for constructing the passthrough + * request specific to SSP. This structure must be set by the win sci layer + * before the passthrough build is called + * + * + */ +struct scic_ssp_passthru_request_callbacks { + /** + * Common callbacks for all Passthru requests + */ + struct scic_passthru_request_callbacks common_callbacks; + /** + * Function pointer to get the lun for passthrough request. + */ + void (*scic_cb_ssp_passthru_get_lun)(void *, u8 **); + /** + * Function pointer to get the cdb + */ + void (*scic_cb_ssp_passthru_get_cdb)(void *, u32 *, u8 **, u32 *, u8 **); + /** + * Function pointer to get the task attribute for passthrough request. + */ + u32 (*scic_cb_ssp_passthru_get_task_attribute)(void *); +}; + +/** + * struct scic_stp_passthru_request_callbacks - This structure contains the + * pointer to the callback functions for constructing the passthrough + * request specific to STP. This structure must be set by the win sci layer + * before the passthrough build is called + * + * + */ +struct scic_stp_passthru_request_callbacks { + /** + * Common callbacks for all Passthru requests + */ + struct scic_passthru_request_callbacks common_callbacks; + /** + * Function pointer to get the protocol for passthrough request. + */ + u8 (*scic_cb_stp_passthru_get_protocol)(void *); + /** + * Function pointer to get the resgister fis + */ + void (*scic_cb_stp_passthru_get_register_fis)(void *, u8 **); + /** + * Function pointer to get the MULTIPLE_COUNT (bits 5,6,7 in Byte 1 in the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) + */ + u8 (*scic_cb_stp_passthru_get_multiplecount)(void *); + /** + * Function pointer to get the EXTEND (bit 0 in Byte 1 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) + */ + u8 (*scic_cb_stp_passthru_get_extend)(void *); + /** + * Function pointer to get the CK_COND (bit 5 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) + */ + u8 (*scic_cb_stp_passthru_get_ckcond)(void *); + /** + * Function pointer to get the T_DIR (bit 3 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) + */ + u8 (*scic_cb_stp_passthru_get_tdir)(void *); + /** + * Function pointer to get the BYTE_BLOCK (bit 2 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) + */ + u8 (*scic_cb_stp_passthru_get_byteblock)(void *); + /** + * Function pointer to get the T_LENGTH (bits 0,1 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) + */ + u8 (*scic_cb_stp_passthru_get_tlength)(void *); + +}; + +/** + * struct scic_smp_passthru_request_callbacks - This structure contains the + * pointer to the callback functions for constructing the passthrough + * request specific to SMP. This structure must be set by the win sci layer + * before the passthrough build is called + * + * + */ +struct scic_smp_passthru_request_callbacks { + /** + * Common callbacks for all Passthru requests + */ + struct scic_passthru_request_callbacks common_callbacks; + + /** + * Function pointer to get the length of the smp request and its length + */ + u32 (*scic_cb_smp_passthru_get_request)(void *, u8 **); + /** + * Function pointer to get the frame type of the smp request + */ + u8 (*scic_cb_smp_passthru_get_frame_type)(void *); + /** + * Function pointer to get the function in the the smp request + */ + u8 (*scic_cb_smp_passthru_get_function)(void *); + + /** + * Function pointer to get the "allocated response length" in the the smp request + */ + u8 (*scic_cb_smp_passthru_get_allocated_response_length)(void *); + +}; + +/** + * This enumeration specifies the transport protocol utilized for the request. + * + * + */ +typedef enum { + /** + * This enumeration constant indicates that no protocol has yet been + * set. + */ + SCIC_NO_PROTOCOL, + + /** + * This enumeration constant indicates that the protocol utilized + * is the Serial Management Protocol. + */ + SCIC_SMP_PROTOCOL, + + /** + * This enumeration constant indicates that the protocol utilized + * is the Serial SCSI Protocol. + */ + SCIC_SSP_PROTOCOL, + + /** + * This enumeration constant indicates that the protocol utilized + * is the Serial-ATA Tunneling Protocol. + */ + SCIC_STP_PROTOCOL + +} SCIC_TRANSPORT_PROTOCOL; + + +/** + * scic_io_request_get_object_size() - This method simply returns the size + * required to build an SCI based IO request object. + * + * Return the size of the SCI IO request object. + */ +u32 scic_io_request_get_object_size( + void); + +/** + * scic_io_request_construct() - This method is called by the SCI user to + * construct all SCI Core IO requests. Memory initialization and + * functionality common to all IO request types is performed in this method. + * @scic_controller: the handle to the core controller object for which to + * build an IO request. + * @scic_remote_device: the handle to the core remote device object for which + * to build an IO request. + * @io_tag: This parameter specifies the IO tag to be associated with this + * request. If SCI_CONTROLLER_INVALID_IO_TAG is passed, then a copy of the + * request is built internally. The request will be copied into the actual + * controller request memory when the IO tag is allocated internally during + * the scic_controller_start_io() method. + * @user_io_request_object: This parameter specifies the user IO request to be + * utilized during IO construction. This IO pointer will become the + * associated object for the core IO request object. + * @scic_io_request_memory: This parameter specifies the memory location to be + * utilized when building the core request. + * @new_scic_io_request_handle: This parameter specifies a pointer to the + * handle the core will expect in further interactions with the core IO + * request object. + * + * The SCI core implementation will create an association between the user IO + * request object and the core IO request object. Indicate if the controller + * successfully built the IO request. SCI_SUCCESS This value is returned if the + * IO request was successfully built. + */ +enum sci_status scic_io_request_construct( + struct scic_sds_controller *scic_controller, + struct scic_sds_remote_device *scic_remote_device, + u16 io_tag, + void *user_io_request_object, + void *scic_io_request_memory, + struct scic_sds_request **new_scic_io_request_handle); + +/** + * scic_io_request_construct_basic_ssp() - This method is called by the SCI + * user to build an SSP IO request. + * @scic_io_request: This parameter specifies the handle to the io request + * object to be built. + * + * - The user must have previously called scic_io_request_construct() on the + * supplied IO request. Indicate if the controller successfully built the IO + * request. SCI_SUCCESS This value is returned if the IO request was + * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned + * if the remote_device does not support the SSP protocol. + * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not + * properly set the association between the SCIC IO request and the user's IO + * request. Please refer to the sci_object_set_association() routine for more + * information. + */ +enum sci_status scic_io_request_construct_basic_ssp( + struct scic_sds_request *scic_io_request); + + + + + +/** + * scic_io_request_construct_basic_sata() - This method is called by the SCI + * Core user to build an STP IO request. + * @scic_io_request: This parameter specifies the handle to the io request + * object to be built. + * + * - The user must have previously called scic_io_request_construct() on the + * supplied IO request. Indicate if the controller successfully built the IO + * request. SCI_SUCCESS This value is returned if the IO request was + * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned + * if the remote_device does not support the STP protocol. + * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not + * properly set the association between the SCIC IO request and the user's IO + * request. Please refer to the sci_object_set_association() routine for more + * information. + */ +enum sci_status scic_io_request_construct_basic_sata( + struct scic_sds_request *scic_io_request); + + + + +/** + * scic_io_request_construct_smp() - This method is called by the SCI user to + * build an SMP IO request. + * @scic_io_request: This parameter specifies the handle to the io request + * object to be built. + * + * - The user must have previously called scic_io_request_construct() on the + * supplied IO request. Indicate if the controller successfully built the IO + * request. SCI_SUCCESS This value is returned if the IO request was + * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned + * if the remote_device does not support the SMP protocol. + * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not + * properly set the association between the SCIC IO request and the user's IO + * request. Please refer to the sci_object_set_association() routine for more + * information. + */ +enum sci_status scic_io_request_construct_smp( + struct scic_sds_request *scic_io_request); + + + +/** + * scic_request_get_controller_status() - This method returns the controller + * specific IO/Task request status. These status values are unique to the + * specific controller being managed by the SCIC. + * @io_request: the handle to the IO or task management request object for + * which to retrieve the status. + * + * This method returns a value indicating the controller specific request + * status. + */ +u32 scic_request_get_controller_status( + struct scic_sds_request *io_request); + + + +/** + * scic_io_request_get_command_iu_address() - This method will return the + * address to the command information unit. + * @scic_io_request: This parameter specifies the handle to the io request + * object to be built. + * + * The address of the SSP/SMP command information unit. + */ +void *scic_io_request_get_command_iu_address( + struct scic_sds_request *scic_io_request); + +/** + * scic_io_request_get_response_iu_address() - This method will return the + * address to the response information unit. For an SSP request this buffer + * is only valid if the IO request is completed with the status + * SCI_FAILURE_IO_RESPONSE_VALID. + * @scic_io_request: This parameter specifies the handle to the io request + * object to be built. + * + * The address of the SSP/SMP response information unit. + */ +void *scic_io_request_get_response_iu_address( + struct scic_sds_request *scic_io_request); + +/** + * scic_io_request_get_io_tag() - This method will return the IO tag utilized + * by the IO request. + * @scic_io_request: This parameter specifies the handle to the io request + * object for which to return the IO tag. + * + * An unsigned integer representing the IO tag being utilized. + * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if the IO does not + * currently have an IO tag allocated to it. All return other values indicate a + * legitimate tag. + */ +u16 scic_io_request_get_io_tag( + struct scic_sds_request *scic_io_request); + + +/** + * scic_stp_io_request_set_ncq_tag() - This method will assign an NCQ tag to + * the io request object. The caller of this function must make sure that + * only valid NCQ tags are assigned to the io request object. + * @scic_io_request: This parameter specifies the handle to the io request + * object to which to assign the ncq tag. + * @ncq_tag: This parameter specifies the NCQ tag to be utilized for the + * supplied core IO request. It is up to the user to make sure that this is + * a valid NCQ tag. + * + * none This function is only valid for SATA NCQ requests. + */ +void scic_stp_io_request_set_ncq_tag( + struct scic_sds_request *scic_io_request, + u16 ncq_tag); + +/** + * scic_stp_io_request_get_h2d_reg_address() - This method will return the + * address of the host to device register fis region for the io request + * object. + * @scic_io_request: This parameter specifies the handle to the io request + * object from which to get the host to device register fis buffer. + * + * The address of the host to device register fis buffer in the io request + * object. This function is only valid for SATA requests. + */ +void *scic_stp_io_request_get_h2d_reg_address( + struct scic_sds_request *scic_io_request); + +/** + * scic_stp_io_request_get_d2h_reg_address() - This method will return the + * address of the device to host register fis region for the io request + * object. + * @scic_io_request: This parameter specifies teh handle to the io request + * object from which to get the device to host register fis buffer. + * + * The address fo the device to host register fis ending the io request. This + * function is only valid for SATA requests. + */ +void *scic_stp_io_request_get_d2h_reg_address( + struct scic_sds_request *scic_io_request); + + +/** + * scic_io_request_get_number_of_bytes_transferred() - This method will return + * the number of bytes transferred from the SCU + * @scic_io_request: This parameter specifies the handle to the io request + * whose data length was not eqaul to the data length specified in the + * request. When the driver gets an early io completion status from the + * hardware, this routine should be called to get the actual number of bytes + * transferred + * + * The return is the number of bytes transferred when the data legth is not + * equal to the specified length in the io request + */ +u32 scic_io_request_get_number_of_bytes_transferred( + struct scic_sds_request *scic_io_request); + + +#endif /* _SCIC_IO_REQUEST_H_ */ + diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h new file mode 100644 index 0000000..25a6140 --- /dev/null +++ b/drivers/scsi/isci/core/scic_phy.h @@ -0,0 +1,303 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_PHY_H_ +#define _SCIC_PHY_H_ + +/** + * This file contains all of the interface methods that can be called by an + * SCIC user on a phy (SAS or SATA) object. + * + * + */ + + +#include "sci_types.h" +#include "sci_status.h" + +#include "intel_sata.h" +#include "intel_sas.h" + +struct scic_sds_phy; +struct scic_sds_port; + +/** + * struct scic_phy_properties - This structure defines the properties common to + * all phys that can be retrieved. + * + * + */ +struct scic_phy_properties { + /** + * This field specifies the port that currently contains the + * supplied phy. This field may be set to SCI_INVALID_HANDLE + * if the phy is not currently contained in a port. + */ + struct scic_sds_port *owning_port; + + /** + * This field specifies the link rate at which the phy is + * currently operating. + */ + enum sci_sas_link_rate negotiated_link_rate; + + /** + * This field indicates the protocols supported by the phy. + */ + struct sci_sas_identify_address_frame_protocols protocols; + + /** + * This field specifies the index of the phy in relation to other + * phys within the controller. This index is zero relative. + */ + u8 index; + +}; + +/** + * struct scic_sas_phy_properties - This structure defines the properties, + * specific to a SAS phy, that can be retrieved. + * + * + */ +struct scic_sas_phy_properties { + /** + * This field delineates the Identify Address Frame received + * from the remote end point. + */ + struct sci_sas_identify_address_frame received_iaf; + + /** + * This field delineates the Phy capabilities structure received + * from the remote end point. + */ + struct sas_capabilities received_capabilities; + +}; + +/** + * struct scic_sata_phy_properties - This structure defines the properties, + * specific to a SATA phy, that can be retrieved. + * + * + */ +struct scic_sata_phy_properties { + /** + * This field delineates the signature FIS received from the + * attached target. + */ + struct sata_fis_reg_d2h signature_fis; + + /** + * This field specifies to the user if a port selector is connected + * on the specified phy. + */ + bool is_port_selector_present; + +}; + +/** + * enum scic_phy_counter_id - This enumeration depicts the various pieces of + * optional information that can be retrieved for a specific phy. + * + * + */ +enum scic_phy_counter_id { + /** + * This PHY information field tracks the number of frames received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME, + + /** + * This PHY information field tracks the number of frames transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME, + + /** + * This PHY information field tracks the number of DWORDs received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD, + + /** + * This PHY information field tracks the number of DWORDs transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD, + + /** + * This PHY information field tracks the number of times DWORD + * synchronization was lost. + */ + SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR, + + /** + * This PHY information field tracks the number of received DWORDs with + * running disparity errors. + */ + SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR, + + /** + * This PHY information field tracks the number of received frames with a + * CRC error (not including short or truncated frames). + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of times the inactivity + * timer for connections on the phy has been utilized. + */ + SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of CREDIT BLOCKED + * primitives received. + * @note Depending on remote device implementation, credit blocks + * may occur regularly. + */ + SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED, + + /** + * This PHY information field contains the number of short frames + * received. A short frame is simply a frame smaller then what is + * allowed by either the SAS or SATA specification. + */ + SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME, + + /** + * This PHY information field contains the number of frames received after + * credit has been exhausted. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT, + + /** + * This PHY information field contains the number of frames received after + * a DONE has been received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE, + + /** + * This PHY information field contains the number of times the phy + * failed to achieve DWORD synchronization during speed negotiation. + */ + SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR +}; + + +/** + * scic_sas_phy_get_properties() - This method will enable the user to retrieve + * information specific to a SAS phy, such as: the received identify address + * frame, received phy capabilities, etc. + * @phy: this parameter specifies the phy for which to retrieve properties. + * @properties: This parameter specifies the properties structure into which to + * copy the requested information. + * + * This method returns an indication as to whether the SAS phy properties were + * successfully retrieved. SCI_SUCCESS This value is returned if the SAS + * properties are successfully retrieved. SCI_FAILURE This value is returned if + * the SAS properties are not successfully retrieved (e.g. It's not a SAS Phy). + */ +enum sci_status scic_sas_phy_get_properties( + struct scic_sds_phy *phy, + struct scic_sas_phy_properties *properties); + +/** + * scic_sata_phy_get_properties() - This method will enable the user to + * retrieve information specific to a SATA phy, such as: the received + * signature FIS, if a port selector is present, etc. + * @phy: this parameter specifies the phy for which to retrieve properties. + * @properties: This parameter specifies the properties structure into which to + * copy the requested information. + * + * This method returns an indication as to whether the SATA phy properties were + * successfully retrieved. SCI_SUCCESS This value is returned if the SATA + * properties are successfully retrieved. SCI_FAILURE This value is returned if + * the SATA properties are not successfully retrieved (e.g. It's not a SATA + * Phy). + */ +enum sci_status scic_sata_phy_get_properties( + struct scic_sds_phy *phy, + struct scic_sata_phy_properties *properties); + + + + + + + +#endif /* _SCIC_PHY_H_ */ + diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h new file mode 100644 index 0000000..34d22c0 --- /dev/null +++ b/drivers/scsi/isci/core/scic_port.h @@ -0,0 +1,213 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_PORT_H_ +#define _SCIC_PORT_H_ + +/** + * This file contains all of the interface methods that can be called by an SCI + * Core user on a SAS or SATA port. + * + * + */ + + +#include "sci_types.h" +#include "sci_status.h" +#include "intel_sas.h" + +struct scic_sds_port; + +enum SCIC_PORT_NOT_READY_REASON_CODE { + SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, + SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, + SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, + SCIC_PORT_NOT_READY_RECONFIGURING, + + SCIC_PORT_NOT_READY_REASON_CODE_MAX +}; + +/** + * struct scic_port_end_point_properties - This structure defines the + * properties that can be retrieved for each end-point local or remote + * (attached) port in the controller. + * + * + */ +struct scic_port_end_point_properties { + /** + * This field indicates the SAS address for the associated end + * point in the port. + */ + struct sci_sas_address sas_address; + + /** + * This field indicates the protocols supported by the associated + * end-point in the port. + */ + struct sci_sas_identify_address_frame_protocols protocols; + +}; + +/** + * struct scic_port_properties - This structure defines the properties that can + * be retrieved for each port in the controller. + * + * + */ +struct scic_port_properties { + /** + * This field specifies the logical index of the port (0 relative). + */ + u32 index; + + /** + * This field indicates the local end-point properties for port. + */ + struct scic_port_end_point_properties local; + + /** + * This field indicates the remote (attached) end-point properties + * for the port. + */ + struct scic_port_end_point_properties remote; + + /** + * This field specifies the phys contained inside the port. + */ + u32 phy_mask; + +}; + +/** + * scic_port_get_properties() - This method simply returns the properties + * regarding the port, such as: physical index, protocols, sas address, etc. + * @port: this parameter specifies the port for which to retrieve the physical + * index. + * @properties: This parameter specifies the properties structure into which to + * copy the requested information. + * + * Indicate if the user specified a valid port. SCI_SUCCESS This value is + * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This + * value is returned if the specified port is not valid. When this value is + * returned, no data is copied to the properties output parameter. + */ +enum sci_status scic_port_get_properties( + struct scic_sds_port *port, + struct scic_port_properties *properties); + + + +/** + * scic_port_start() - This method will make the port ready for operation. + * Prior to calling the start method IO operation is not possible. + * @port: This parameter specifies the port to be started. + * + * Indicate if the port was successfully started. SCI_SUCCESS This value is + * returned if the port was successfully started. SCI_WARNING_ALREADY_IN_STATE + * This value is returned if the port is in the process of starting. + * SCI_FAILURE_INVALID_PORT This value is returned if the supplied port is not + * valid. SCI_FAILURE_INVALID_STATE This value is returned if a start operation + * can't be completed due to the state of port. + */ +enum sci_status scic_port_start( + struct scic_sds_port *port); + +/** + * scic_port_stop() - This method will make the port no longer ready for + * operation. After invoking this method IO operation is not possible. + * @port: This parameter specifies the port to be stopped. + * + * Indicate if the port was successfully stopped. SCI_SUCCESS This value is + * returned if the port was successfully stopped. SCI_WARNING_ALREADY_IN_STATE + * This value is returned if the port is already stopped or in the process of + * stopping. SCI_FAILURE_INVALID_PORT This value is returned if the supplied + * port is not valid. SCI_FAILURE_INVALID_STATE This value is returned if a + * stop operation can't be completed due to the state of port. + */ +enum sci_status scic_port_stop( + struct scic_sds_port *port); + +/** + * scic_port_hard_reset() - This method will request the SCI implementation to + * perform a HARD RESET on the SAS Port. If/When the HARD RESET completes + * the SCI user will be notified via an SCI OS callback indicating a direct + * attached device was found. + * @port: a handle corresponding to the SAS port to be hard reset. + * @reset_timeout: This parameter specifies the number of milliseconds in which + * the port reset operation should complete. + * + * The SCI User callback in SCIC_USER_CALLBACKS_T will only be called once for + * each phy in the SAS Port at completion of the hard reset sequence. Return a + * status indicating whether the hard reset started successfully. SCI_SUCCESS + * This value is returned if the hard reset operation started successfully. + */ +enum sci_status scic_port_hard_reset( + struct scic_sds_port *port, + u32 reset_timeout); + +/** + * scic_port_enable_broadcast_change_notification() - This API method enables + * the broadcast change notification from underneath hardware. + * @port: The port upon which broadcast change notifications (BCN) are to be + * enabled. + * + */ +void scic_port_enable_broadcast_change_notification( + struct scic_sds_port *port); + + +#endif /* _SCIC_PORT_H_ */ + diff --git a/drivers/scsi/isci/core/scic_remote_device.h b/drivers/scsi/isci/core/scic_remote_device.h new file mode 100644 index 0000000..e8c0459 --- /dev/null +++ b/drivers/scsi/isci/core/scic_remote_device.h @@ -0,0 +1,295 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_REMOTE_DEVICE_H_ +#define _SCIC_REMOTE_DEVICE_H_ + +/** + * This file contains all of the interface methods that can be called by an + * SCIC user on the device object. + * + * + */ + + +#include "sci_types.h" +#include "sci_status.h" +#include "intel_sas.h" + +struct scic_sds_port; +struct scic_sds_remote_device; + +/** + * + * + * + */ +enum scic_remote_device_not_ready_reason_code { + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, + + SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX + +}; + +/** + * scic_remote_device_get_object_size() - This method simply returns the + * maximum memory space needed to store a remote device object. + * + * a positive integer value indicating the size (in bytes) of the remote device + * object. + */ +u32 scic_remote_device_get_object_size( + void); + +struct scic_sds_port; +struct scic_sds_remote_device; +/** + * scic_remote_device_construct() - This method will perform the construction + * common to all remote device objects. + * @sci_port: SAS/SATA port through which this device is accessed. + * @sci_dev: remote device to construct + * + * It isn't necessary to call scic_remote_device_destruct() for device objects + * that have only called this method for construction. Once subsequent + * construction methods have been invoked (e.g. + * scic_remote_device_da_construct()), then destruction should occur. none + */ +void scic_remote_device_construct(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev); + +/** + * scic_remote_device_da_construct() - This method will construct a + * SCIC_REMOTE_DEVICE object for a direct attached (da) device. The + * information (e.g. IAF, Signature FIS, etc.) necessary to build the device + * is known to the SCI Core since it is contained in the scic_phy object. + * @remote_device: This parameter specifies the remote device to be destructed. + * + * The user must have previously called scic_remote_device_construct() Remote + * device objects are a limited resource. As such, they must be protected. + * Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. Indicate if the remote device was successfully constructed. + * SCI_SUCCESS Returned if the device was successfully constructed. + * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been + * constructed. If it's an additional phy for the target, then call + * scic_remote_device_da_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned + * if the supplied parameters necessitate creation of a remote device for which + * the protocol is not supported by the underlying controller hardware. + * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core + * controller associated with the supplied parameters is unable to support + * additional remote devices. + */ +enum sci_status scic_remote_device_da_construct( + struct scic_sds_remote_device *remote_device); + +/** + * scic_remote_device_ea_construct() - This method will construct an + * SCIC_REMOTE_DEVICE object for an expander attached (ea) device from an + * SMP Discover Response. + * @remote_device: This parameter specifies the remote device to be destructed. + * @discover_response: This parameter specifies the SMP Discovery Response to + * be used in device creation. + * + * The user must have previously called scic_remote_device_construct() Remote + * device objects are a limited resource. As such, they must be protected. + * Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. Indicate if the remote device was successfully constructed. + * SCI_SUCCESS Returned if the device was successfully constructed. + * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been + * constructed. If it's an additional phy for the target, then call + * scic_ea_remote_device_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned + * if the supplied parameters necessitate creation of a remote device for which + * the protocol is not supported by the underlying controller hardware. + * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core + * controller associated with the supplied parameters is unable to support + * additional remote devices. + */ +enum sci_status scic_remote_device_ea_construct( + struct scic_sds_remote_device *remote_device, + struct smp_response_discover *discover_response); + +/** + * scic_remote_device_destruct() - This method is utilized to free up a core's + * remote device object. + * @remote_device: This parameter specifies the remote device to be destructed. + * + * Remote device objects are a limited resource. As such, they must be + * protected. Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. The return value shall indicate if the device was + * successfully destructed or if some failure occurred. enum sci_status This value + * is returned if the device is successfully destructed. + * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied + * device isn't valid (e.g. it's already been destoryed, the handle isn't + * valid, etc.). + */ +enum sci_status scic_remote_device_destruct( + struct scic_sds_remote_device *remote_device); + + + + + +/** + * scic_remote_device_start() - This method will start the supplied remote + * device. This method enables normal IO requests to flow through to the + * remote device. + * @remote_device: This parameter specifies the device to be started. + * @timeout: This parameter specifies the number of milliseconds in which the + * start operation should complete. + * + * An indication of whether the device was successfully started. SCI_SUCCESS + * This value is returned if the device was successfully started. + * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start + * the device when there have been no phys added to it. + */ +enum sci_status scic_remote_device_start( + struct scic_sds_remote_device *remote_device, + u32 timeout); + +/** + * scic_remote_device_stop() - This method will stop both transmission and + * reception of link activity for the supplied remote device. This method + * disables normal IO requests from flowing through to the remote device. + * @remote_device: This parameter specifies the device to be stopped. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * An indication of whether the device was successfully stopped. SCI_SUCCESS + * This value is returned if the transmission and reception for the device was + * successfully stopped. + */ +enum sci_status scic_remote_device_stop( + struct scic_sds_remote_device *remote_device, + u32 timeout); + +/** + * scic_remote_device_reset() - This method will reset the device making it + * ready for operation. This method must be called anytime the device is + * reset either through a SMP phy control or a port hard reset request. + * @remote_device: This parameter specifies the device to be reset. + * + * This method does not actually cause the device hardware to be reset. This + * method resets the software object so that it will be operational after a + * device hardware reset completes. An indication of whether the device reset + * was accepted. SCI_SUCCESS This value is returned if the device reset is + * started. + */ +enum sci_status scic_remote_device_reset( + struct scic_sds_remote_device *remote_device); + +/** + * scic_remote_device_reset_complete() - This method informs the device object + * that the reset operation is complete and the device can resume operation + * again. + * @remote_device: This parameter specifies the device which is to be informed + * of the reset complete operation. + * + * An indication that the device is resuming operation. SCI_SUCCESS the device + * is resuming operation. + */ +enum sci_status scic_remote_device_reset_complete( + struct scic_sds_remote_device *remote_device); + + + +/** + * scic_remote_device_get_connection_rate() - This method simply returns the + * link rate at which communications to the remote device occur. + * @remote_device: This parameter specifies the device for which to get the + * connection rate. + * + * Return the link rate at which we transfer for the supplied remote device. + */ +enum sci_sas_link_rate scic_remote_device_get_connection_rate( + struct scic_sds_remote_device *remote_device); + +/** + * scic_remote_device_get_protocols() - This method will indicate which + * protocols are supported by this remote device. + * @remote_device: This parameter specifies the device for which to return the + * protocol. + * @protocols: This parameter specifies the output values, from the remote + * device object, which indicate the protocols supported by the supplied + * remote_device. + * + * The type of protocols supported by this device. The values are returned as + * part of a bit mask in order to allow for multi-protocol support. + */ +void scic_remote_device_get_protocols( + struct scic_sds_remote_device *remote_device, + struct smp_discover_response_protocols *protocols); + + +#if !defined(DISABLE_ATAPI) +/** + * scic_remote_device_is_atapi() - + * @this_device: The device whose type is to be decided. + * + * This method first decide whether a device is a stp target, then decode the + * signature fis of a DA STP device to tell whether it is a standard end disk + * or an ATAPI device. bool Indicate a device is ATAPI device or not. + */ +bool scic_remote_device_is_atapi( + struct scic_sds_remote_device *device_handle); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_remote_device_is_atapi(device_handle) false +#endif /* !defined(DISABLE_ATAPI) */ + + +#endif /* _SCIC_REMOTE_DEVICE_H_ */ + diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c new file mode 100644 index 0000000..35f7796 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -0,0 +1,4147 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include "scic_controller.h" +#include "scic_phy.h" +#include "scic_port.h" +#include "scic_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_controller_registers.h" +#include "scic_sds_pci.h" +#include "scic_sds_phy.h" +#include "scic_sds_port_configuration_agent.h" +#include "scic_sds_port.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_request.h" +#include "scic_user_callback.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_completion_codes.h" +#include "scu_constants.h" +#include "scu_event_codes.h" +#include "scu_remote_node_context.h" +#include "scu_task_context.h" +#include "scu_unsolicited_frame.h" + +#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 + +/** + * smu_dcc_get_max_ports() - + * + * This macro returns the maximum number of logical ports supported by the + * hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_ports(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \ + ) + +/** + * smu_dcc_get_max_task_context() - + * + * This macro returns the maximum number of task contexts supported by the + * hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_task_context(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \ + ) + +/** + * smu_dcc_get_max_remote_node_context() - + * + * This macro returns the maximum number of remote node contexts supported by + * the hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_remote_node_context(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \ + ) + + +static void scic_sds_controller_power_control_timer_handler( + void *controller); +#define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT 3 +#define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT 3 + +/** + * + * + * The number of milliseconds to wait for a phy to start. + */ +#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 + +/** + * + * + * The number of milliseconds to wait while a given phy is consuming power + * before allowing another set of phys to consume power. Ultimately, this will + * be specified by OEM parameter. + */ +#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500 + +/** + * COMPLETION_QUEUE_CYCLE_BIT() - + * + * This macro will return the cycle bit of the completion queue entry + */ +#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000) + +/** + * NORMALIZE_GET_POINTER() - + * + * This macro will normalize the completion queue get pointer so its value can + * be used as an index into an array + */ +#define NORMALIZE_GET_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK) + +/** + * NORMALIZE_PUT_POINTER() - + * + * This macro will normalize the completion queue put pointer so its value can + * be used as an array inde + */ +#define NORMALIZE_PUT_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK) + + +/** + * NORMALIZE_GET_POINTER_CYCLE_BIT() - + * + * This macro will normalize the completion queue cycle pointer so it matches + * the completion queue cycle bit + */ +#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \ + ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT)) + +/** + * NORMALIZE_EVENT_POINTER() - + * + * This macro will normalize the completion queue event entry so its value can + * be used as an index. + */ +#define NORMALIZE_EVENT_POINTER(x) \ + (\ + ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \ + >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \ + ) + +/** + * INCREMENT_COMPLETION_QUEUE_GET() - + * + * This macro will increment the controllers completion queue index value and + * possibly toggle the cycle bit if the completion queue index wraps back to 0. + */ +#define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \ + INCREMENT_QUEUE_GET(\ + (index), \ + (cycle), \ + (controller)->completion_queue_entries, \ + SMU_CQGR_CYCLE_BIT \ + ) + +/** + * INCREMENT_EVENT_QUEUE_GET() - + * + * This macro will increment the controllers event queue index value and + * possibly toggle the event cycle bit if the event queue index wraps back to 0. + */ +#define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \ + INCREMENT_QUEUE_GET(\ + (index), \ + (cycle), \ + (controller)->completion_event_entries, \ + SMU_CQGR_EVENT_CYCLE_BIT \ + ) + +struct sci_base_memory_descriptor_list * +sci_controller_get_memory_descriptor_list_handle(struct scic_sds_controller *scic) +{ + return &scic->parent.mdl; +} + +/* + * ****************************************************************************- + * * SCIC SDS Controller Initialization Methods + * ****************************************************************************- */ + +/** + * This timer is used to start another phy after we have given up on the + * previous phy to transition to the ready state. + * + * + */ +static void scic_sds_controller_phy_startup_timeout_handler( + void *controller) +{ + enum sci_status status; + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + this_controller->phy_startup_timer_pending = false; + + status = SCI_FAILURE; + + while (status != SCI_SUCCESS) { + status = scic_sds_controller_start_next_phy(this_controller); + } +} + +/** + * + * + * This method initializes the phy startup operations for controller start. + */ +void scic_sds_controller_initialize_phy_startup( + struct scic_sds_controller *this_controller) +{ + this_controller->phy_startup_timer = scic_cb_timer_create( + this_controller, + scic_sds_controller_phy_startup_timeout_handler, + this_controller + ); + + this_controller->next_phy_to_start = 0; + this_controller->phy_startup_timer_pending = false; +} + +/** + * + * + * This method initializes the power control operations for the controller + * object. + */ +void scic_sds_controller_initialize_power_control( + struct scic_sds_controller *this_controller) +{ + this_controller->power_control.timer = scic_cb_timer_create( + this_controller, + scic_sds_controller_power_control_timer_handler, + this_controller + ); + + memset( + this_controller->power_control.requesters, + 0, + sizeof(this_controller->power_control.requesters) + ); + + this_controller->power_control.phys_waiting = 0; +} + +/* --------------------------------------------------------------------------- */ + +#define SCU_REMOTE_NODE_CONTEXT_ALIGNMENT (32) +#define SCU_TASK_CONTEXT_ALIGNMENT (256) +#define SCU_UNSOLICITED_FRAME_ADDRESS_ALIGNMENT (64) +#define SCU_UNSOLICITED_FRAME_BUFFER_ALIGNMENT (1024) +#define SCU_UNSOLICITED_FRAME_HEADER_ALIGNMENT (64) + +/* --------------------------------------------------------------------------- */ + +/** + * This method builds the memory descriptor table for this controller. + * @this_controller: This parameter specifies the controller object for which + * to build the memory table. + * + */ +static void scic_sds_controller_build_memory_descriptor_table( + struct scic_sds_controller *this_controller) +{ + sci_base_mde_construct( + &this_controller->memory_descriptors[SCU_MDE_COMPLETION_QUEUE], + SCU_COMPLETION_RAM_ALIGNMENT, + (sizeof(u32) * this_controller->completion_queue_entries), + (SCI_MDE_ATTRIBUTE_CACHEABLE | SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS) + ); + + sci_base_mde_construct( + &this_controller->memory_descriptors[SCU_MDE_REMOTE_NODE_CONTEXT], + SCU_REMOTE_NODE_CONTEXT_ALIGNMENT, + this_controller->remote_node_entries * sizeof(union scu_remote_node_context), + SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS + ); + + sci_base_mde_construct( + &this_controller->memory_descriptors[SCU_MDE_TASK_CONTEXT], + SCU_TASK_CONTEXT_ALIGNMENT, + this_controller->task_context_entries * sizeof(struct scu_task_context), + SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS + ); + + /* + * The UF buffer address table size must be programmed to a power + * of 2. Find the first power of 2 that is equal to or greater then + * the number of unsolicited frame buffers to be utilized. */ + scic_sds_unsolicited_frame_control_set_address_table_count( + &this_controller->uf_control + ); + + sci_base_mde_construct( + &this_controller->memory_descriptors[SCU_MDE_UF_BUFFER], + SCU_UNSOLICITED_FRAME_BUFFER_ALIGNMENT, + scic_sds_unsolicited_frame_control_get_mde_size(this_controller->uf_control), + SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS + ); +} + +/** + * This method validates the driver supplied memory descriptor table. + * @this_controller: + * + * enum sci_status + */ +enum sci_status scic_sds_controller_validate_memory_descriptor_table( + struct scic_sds_controller *this_controller) +{ + bool mde_list_valid; + + mde_list_valid = sci_base_mde_is_valid( + &this_controller->memory_descriptors[SCU_MDE_COMPLETION_QUEUE], + SCU_COMPLETION_RAM_ALIGNMENT, + (sizeof(u32) * this_controller->completion_queue_entries), + (SCI_MDE_ATTRIBUTE_CACHEABLE | SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS) + ); + + if (mde_list_valid == false) + return SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD; + + mde_list_valid = sci_base_mde_is_valid( + &this_controller->memory_descriptors[SCU_MDE_REMOTE_NODE_CONTEXT], + SCU_REMOTE_NODE_CONTEXT_ALIGNMENT, + this_controller->remote_node_entries * sizeof(union scu_remote_node_context), + SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS + ); + + if (mde_list_valid == false) + return SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD; + + mde_list_valid = sci_base_mde_is_valid( + &this_controller->memory_descriptors[SCU_MDE_TASK_CONTEXT], + SCU_TASK_CONTEXT_ALIGNMENT, + this_controller->task_context_entries * sizeof(struct scu_task_context), + SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS + ); + + if (mde_list_valid == false) + return SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD; + + mde_list_valid = sci_base_mde_is_valid( + &this_controller->memory_descriptors[SCU_MDE_UF_BUFFER], + SCU_UNSOLICITED_FRAME_BUFFER_ALIGNMENT, + scic_sds_unsolicited_frame_control_get_mde_size(this_controller->uf_control), + SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS + ); + + if (mde_list_valid == false) + return SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD; + + return SCI_SUCCESS; +} + +/** + * This method initializes the controller with the physical memory addresses + * that are used to communicate with the driver. + * @this_controller: + * + */ +void scic_sds_controller_ram_initialization( + struct scic_sds_controller *this_controller) +{ + struct sci_physical_memory_descriptor *mde; + + /* + * The completion queue is actually placed in cacheable memory + * Therefore it no longer comes out of memory in the MDL. */ + mde = &this_controller->memory_descriptors[SCU_MDE_COMPLETION_QUEUE]; + this_controller->completion_queue = (u32 *)mde->virtual_address; + SMU_CQBAR_WRITE(this_controller, mde->physical_address); + + /* + * Program the location of the Remote Node Context table + * into the SCU. */ + mde = &this_controller->memory_descriptors[SCU_MDE_REMOTE_NODE_CONTEXT]; + this_controller->remote_node_context_table = (union scu_remote_node_context *) + mde->virtual_address; + SMU_RNCBAR_WRITE(this_controller, mde->physical_address); + + /* Program the location of the Task Context table into the SCU. */ + mde = &this_controller->memory_descriptors[SCU_MDE_TASK_CONTEXT]; + this_controller->task_context_table = (struct scu_task_context *) + mde->virtual_address; + SMU_HTTBAR_WRITE(this_controller, mde->physical_address); + + mde = &this_controller->memory_descriptors[SCU_MDE_UF_BUFFER]; + scic_sds_unsolicited_frame_control_construct( + &this_controller->uf_control, mde, this_controller + ); + + /* + * Inform the silicon as to the location of the UF headers and + * address table. */ + SCU_UFHBAR_WRITE( + this_controller, + this_controller->uf_control.headers.physical_address); + SCU_PUFATHAR_WRITE( + this_controller, + this_controller->uf_control.address_table.physical_address); +} + +/** + * This method initializes the task context data for the controller. + * @this_controller: + * + */ +void scic_sds_controller_assign_task_entries( + struct scic_sds_controller *this_controller) +{ + u32 task_assignment; + + /* + * Assign all the TCs to function 0 + * TODO: Do we actually need to read this register to write it back? */ + task_assignment = SMU_TCA_READ(this_controller, 0); + + task_assignment = + ( + task_assignment + | (SMU_TCA_GEN_VAL(STARTING, 0)) + | (SMU_TCA_GEN_VAL(ENDING, this_controller->task_context_entries - 1)) + | (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)) + ); + + SMU_TCA_WRITE(this_controller, 0, task_assignment); +} + +/** + * This method initializes the hardware completion queue. + * + * + */ +void scic_sds_controller_initialize_completion_queue( + struct scic_sds_controller *this_controller) +{ + u32 index; + u32 completion_queue_control_value; + u32 completion_queue_get_value; + u32 completion_queue_put_value; + + this_controller->completion_queue_get = 0; + + completion_queue_control_value = ( + SMU_CQC_QUEUE_LIMIT_SET(this_controller->completion_queue_entries - 1) + | SMU_CQC_EVENT_LIMIT_SET(this_controller->completion_event_entries - 1) + ); + + SMU_CQC_WRITE(this_controller, completion_queue_control_value); + + /* Set the completion queue get pointer and enable the queue */ + completion_queue_get_value = ( + (SMU_CQGR_GEN_VAL(POINTER, 0)) + | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0)) + | (SMU_CQGR_GEN_BIT(ENABLE)) + | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) + ); + + SMU_CQGR_WRITE(this_controller, completion_queue_get_value); + + /* Set the completion queue put pointer */ + completion_queue_put_value = ( + (SMU_CQPR_GEN_VAL(POINTER, 0)) + | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) + ); + + SMU_CQPR_WRITE(this_controller, completion_queue_put_value); + + /* Initialize the cycle bit of the completion queue entries */ + for (index = 0; index < this_controller->completion_queue_entries; index++) { + /* + * If get.cycle_bit != completion_queue.cycle_bit + * its not a valid completion queue entry + * so at system start all entries are invalid */ + this_controller->completion_queue[index] = 0x80000000; + } +} + +/** + * This method initializes the hardware unsolicited frame queue. + * + * + */ +void scic_sds_controller_initialize_unsolicited_frame_queue( + struct scic_sds_controller *this_controller) +{ + u32 frame_queue_control_value; + u32 frame_queue_get_value; + u32 frame_queue_put_value; + + /* Write the queue size */ + frame_queue_control_value = + SCU_UFQC_GEN_VAL(QUEUE_SIZE, this_controller->uf_control.address_table.count); + + SCU_UFQC_WRITE(this_controller, frame_queue_control_value); + + /* Setup the get pointer for the unsolicited frame queue */ + frame_queue_get_value = ( + SCU_UFQGP_GEN_VAL(POINTER, 0) + | SCU_UFQGP_GEN_BIT(ENABLE_BIT) + ); + + SCU_UFQGP_WRITE(this_controller, frame_queue_get_value); + + /* Setup the put pointer for the unsolicited frame queue */ + frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); + + SCU_UFQPP_WRITE(this_controller, frame_queue_put_value); +} + +/** + * This method enables the hardware port task scheduler. + * + * + */ +void scic_sds_controller_enable_port_task_scheduler( + struct scic_sds_controller *this_controller) +{ + u32 port_task_scheduler_value; + + port_task_scheduler_value = SCU_PTSGCR_READ(this_controller); + + port_task_scheduler_value |= + (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); + + SCU_PTSGCR_WRITE(this_controller, port_task_scheduler_value); +} + +/* --------------------------------------------------------------------------- */ + +/** + * + * + * This macro is used to delay between writes to the AFE registers during AFE + * initialization. + */ +#define AFE_REGISTER_WRITE_DELAY 10 + +static bool is_a0(void) +{ + return isci_si_rev == ISCI_SI_REVA0; +} + +static bool is_a2(void) +{ + return isci_si_rev == ISCI_SI_REVA2; +} + +static bool is_b0(void) +{ + return isci_si_rev > ISCI_SI_REVA2; +} + +/* Initialize the AFE for this phy index. We need to read the AFE setup from + * the OEM parameters none + */ +void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) +{ + u32 afe_status; + u32 phy_id; + + /* Clear DFX Status registers */ + scu_afe_register_write(scic, afe_dfx_master_control0, 0x0081000f); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + /* Configure bias currents to normal */ + if (is_a0()) + scu_afe_register_write(scic, afe_bias_control, 0x00005500); + else + scu_afe_register_write(scic, afe_bias_control, 0x00005A00); + + + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + /* Enable PLL */ + if (is_b0()) + scu_afe_register_write(scic, afe_pll_control0, 0x80040A08); + else + scu_afe_register_write(scic, afe_pll_control0, 0x80040908); + + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + /* Wait for the PLL to lock */ + do { + afe_status = scu_afe_register_read( + scic, afe_common_block_status); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + } while ((afe_status & 0x00001000) == 0); + + if (is_b0()) { + /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ + scu_afe_register_write(scic, afe_pmsn_master_control0, 0x7bcc96ad); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + } + + for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + if (is_b0()) { + /* Configure transmitter SSC parameters */ + scu_afe_txreg_write(scic, phy_id, afe_tx_ssc_control, 0x00030000); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + } else { + /* + * All defaults, except the Receive Word Alignament/Comma Detect + * Enable....(0xe800) */ + scu_afe_txreg_write(scic, phy_id, afe_xcvr_control0, 0x00004512); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + scu_afe_txreg_write(scic, phy_id, afe_xcvr_control1, 0x0050100F); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + } + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + if (is_a0()) + scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003D4); + else if (is_a2()) + scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003F0); + else { + /* Power down TX and RX (PWRDNTX and PWRDNRX) */ + scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003d7); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003d4); + } + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + if (is_a0() || is_a2()) { + /* Enable TX equalization (0xe824) */ + scu_afe_txreg_write(scic, phy_id, afe_tx_control, 0x00040000); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + } + + /* + * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), + * RDD=0x0(RX Detect Enabled) ....(0xe800) */ + scu_afe_txreg_write(scic, phy_id, afe_xcvr_control0, 0x00004100); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + /* Leave DFE/FFE on */ + if (is_a0()) + scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F09983F); + else if (is_a2()) + scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F11103F); + else { + scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F11103F); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + /* Enable TX equalization (0xe824) */ + scu_afe_txreg_write(scic, phy_id, afe_tx_control, 0x00040000); + } + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, 0x000E7C03); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control1, 0x000E7C03); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control2, 0x000E7C03); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + + scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control3, 0x000E7C03); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + } + + /* Transfer control to the PEs */ + scu_afe_register_write(scic, afe_dfx_master_control0, 0x00010f00); + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); +} + +/* + * ****************************************************************************- + * * SCIC SDS Controller Internal Start/Stop Routines + * ****************************************************************************- */ + + +/** + * This method will attempt to transition into the ready state for the + * controller and indicate that the controller start operation has completed + * if all criteria are met. + * @this_controller: This parameter indicates the controller object for which + * to transition to ready. + * @status: This parameter indicates the status value to be pass into the call + * to scic_cb_controller_start_complete(). + * + * none. + */ +static void scic_sds_controller_transition_to_ready( + struct scic_sds_controller *this_controller, + enum sci_status status) +{ + if (this_controller->parent.state_machine.current_state_id + == SCI_BASE_CONTROLLER_STATE_STARTING) { + /* + * We move into the ready state, because some of the phys/ports + * may be up and operational. */ + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(this_controller), + SCI_BASE_CONTROLLER_STATE_READY + ); + + scic_cb_controller_start_complete(this_controller, status); + } +} + +/** + * This method is the general timeout handler for the controller. It will take + * the correct timetout action based on the current controller state + */ +void scic_sds_controller_timeout_handler( + struct scic_sds_controller *scic) +{ + enum sci_base_controller_states current_state; + + current_state = sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine(scic)); + + if (current_state == SCI_BASE_CONTROLLER_STATE_STARTING) { + scic_sds_controller_transition_to_ready( + scic, SCI_FAILURE_TIMEOUT); + } else if (current_state == SCI_BASE_CONTROLLER_STATE_STOPPING) { + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_FAILED); + scic_cb_controller_stop_complete(scic, SCI_FAILURE_TIMEOUT); + } else /* / @todo Now what do we want to do in this case? */ + dev_err(scic_to_dev(scic), + "%s: Controller timer fired when controller was not " + "in a state being timed.\n", + __func__); +} + +/** + * scic_sds_controller_get_port_configuration_mode + * @this_controller: This is the controller to use to determine if we are using + * manual or automatic port configuration. + * + * SCIC_PORT_CONFIGURATION_MODE + */ +enum SCIC_PORT_CONFIGURATION_MODE scic_sds_controller_get_port_configuration_mode( + struct scic_sds_controller *this_controller) +{ + u32 index; + enum SCIC_PORT_CONFIGURATION_MODE mode; + + mode = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; + + for (index = 0; index < SCI_MAX_PORTS; index++) { + if (this_controller->oem_parameters.sds1.ports[index].phy_mask != 0) { + mode = SCIC_PORT_MANUAL_CONFIGURATION_MODE; + break; + } + } + + return mode; +} + +enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) +{ + u32 index; + enum sci_status port_status; + enum sci_status status = SCI_SUCCESS; + + for (index = 0; index < scic->logical_port_entries; index++) { + port_status = scic_port_stop(&scic->port_table[index]); + + if ((port_status != SCI_SUCCESS) && + (port_status != SCI_FAILURE_INVALID_STATE)) { + status = SCI_FAILURE; + + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed to " + "stop port %d because of status %d.\n", + __func__, + scic->port_table[index].logical_port_index, + port_status); + } + } + + return status; +} + +/** + * + * + * + */ +static void scic_sds_controller_phy_timer_start( + struct scic_sds_controller *this_controller) +{ + scic_cb_timer_start( + this_controller, + this_controller->phy_startup_timer, + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT + ); + + this_controller->phy_startup_timer_pending = true; +} + +/** + * + * + * + */ +void scic_sds_controller_phy_timer_stop( + struct scic_sds_controller *this_controller) +{ + scic_cb_timer_stop( + this_controller, + this_controller->phy_startup_timer + ); + + this_controller->phy_startup_timer_pending = false; +} + +/** + * This method is called internally by the controller object to start the next + * phy on the controller. If all the phys have been starte, then this + * method will attempt to transition the controller to the READY state and + * inform the user (scic_cb_controller_start_complete()). + * @this_controller: This parameter specifies the controller object for which + * to start the next phy. + * + * enum sci_status + */ +enum sci_status scic_sds_controller_start_next_phy( + struct scic_sds_controller *this_controller) +{ + enum sci_status status; + + status = SCI_SUCCESS; + + if (this_controller->phy_startup_timer_pending == false) { + if (this_controller->next_phy_to_start == SCI_MAX_PHYS) { + bool is_controller_start_complete = true; + struct scic_sds_phy *the_phy; + u8 index; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + the_phy = &this_controller->phy_table[index]; + + if (scic_sds_phy_get_port(the_phy) != SCI_INVALID_HANDLE) { + /** + * The controller start operation is complete if and only + * if: + * - all links have been given an opportunity to start + * - have no indication of a connected device + * - have an indication of a connected device and it has + * finished the link training process. + */ + if ( + ( + (the_phy->is_in_link_training == false) + && (the_phy->parent.state_machine.current_state_id + == SCI_BASE_PHY_STATE_INITIAL) + ) + || ( + (the_phy->is_in_link_training == false) + && (the_phy->parent.state_machine.current_state_id + == SCI_BASE_PHY_STATE_STOPPED) + ) + || ( + (the_phy->is_in_link_training == true) + && (the_phy->parent.state_machine.current_state_id + == SCI_BASE_PHY_STATE_STARTING) + ) + ) { + is_controller_start_complete = false; + break; + } + } + } + + /* + * The controller has successfully finished the start process. + * Inform the SCI Core user and transition to the READY state. */ + if (is_controller_start_complete == true) { + scic_sds_controller_transition_to_ready( + this_controller, SCI_SUCCESS + ); + scic_sds_controller_phy_timer_stop(this_controller); + } + } else { + struct scic_sds_phy *the_phy; + + the_phy = &this_controller->phy_table[this_controller->next_phy_to_start]; + + if ( + scic_sds_controller_get_port_configuration_mode(this_controller) + == SCIC_PORT_MANUAL_CONFIGURATION_MODE + ) { + if (scic_sds_phy_get_port(the_phy) == SCI_INVALID_HANDLE) { + this_controller->next_phy_to_start++; + + /* + * Caution recursion ahead be forwarned + * + * The PHY was never added to a PORT in MPC mode so start the next phy in sequence + * This phy will never go link up and will not draw power the OEM parameters either + * configured the phy incorrectly for the PORT or it was never assigned to a PORT */ + return scic_sds_controller_start_next_phy(this_controller); + } + } + + status = scic_sds_phy_start(the_phy); + + if (status == SCI_SUCCESS) { + scic_sds_controller_phy_timer_start(this_controller); + } else { + dev_warn(scic_to_dev(this_controller), + "%s: Controller stop operation failed " + "to stop phy %d because of status " + "%d.\n", + __func__, + this_controller->phy_table[this_controller->next_phy_to_start].phy_index, + status); + } + + this_controller->next_phy_to_start++; + } + } + + return status; +} + +/** + * + * @this_controller: + * + * enum sci_status + */ +enum sci_status scic_sds_controller_stop_phys( + struct scic_sds_controller *this_controller) +{ + u32 index; + enum sci_status status; + enum sci_status phy_status; + + status = SCI_SUCCESS; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy_status = scic_sds_phy_stop(&this_controller->phy_table[index]); + + if ( + (phy_status != SCI_SUCCESS) + && (phy_status != SCI_FAILURE_INVALID_STATE) + ) { + status = SCI_FAILURE; + + dev_warn(scic_to_dev(this_controller), + "%s: Controller stop operation failed to stop " + "phy %d because of status %d.\n", + __func__, + this_controller->phy_table[index].phy_index, phy_status); + } + } + + return status; +} + +/** + * + * @this_controller: + * + * enum sci_status + */ +enum sci_status scic_sds_controller_stop_devices( + struct scic_sds_controller *this_controller) +{ + u32 index; + enum sci_status status; + enum sci_status device_status; + + status = SCI_SUCCESS; + + for (index = 0; index < this_controller->remote_node_entries; index++) { + if (this_controller->device_table[index] != SCI_INVALID_HANDLE) { + /* / @todo What timeout value do we want to provide to this request? */ + device_status = scic_remote_device_stop(this_controller->device_table[index], 0); + + if ((device_status != SCI_SUCCESS) && + (device_status != SCI_FAILURE_INVALID_STATE)) { + dev_warn(scic_to_dev(this_controller), + "%s: Controller stop operation failed " + "to stop device 0x%p because of " + "status %d.\n", + __func__, + this_controller->device_table[index], device_status); + } + } + } + + return status; +} + +/* + * ****************************************************************************- + * * SCIC SDS Controller Power Control (Staggered Spinup) + * ****************************************************************************- */ + +/** + * + * + * This method starts the power control timer for this controller object. + */ +static void scic_sds_controller_power_control_timer_start( + struct scic_sds_controller *this_controller) +{ + scic_cb_timer_start( + this_controller, this_controller->power_control.timer, + SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL + ); + + this_controller->power_control.timer_started = true; +} + +/** + * + * + * + */ +static void scic_sds_controller_power_control_timer_handler( + void *controller) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + if (this_controller->power_control.phys_waiting == 0) { + this_controller->power_control.timer_started = false; + } else { + struct scic_sds_phy *the_phy = NULL; + u8 i; + + for (i = 0; + (i < SCI_MAX_PHYS) + && (this_controller->power_control.phys_waiting != 0); + i++) { + if (this_controller->power_control.requesters[i] != NULL) { + the_phy = this_controller->power_control.requesters[i]; + this_controller->power_control.requesters[i] = NULL; + this_controller->power_control.phys_waiting--; + break; + } + } + + /* + * It doesn't matter if the power list is empty, we need to start the + * timer in case another phy becomes ready. */ + scic_sds_controller_power_control_timer_start(this_controller); + + scic_sds_phy_consume_power_handler(the_phy); + } +} + +/** + * This method inserts the phy in the stagger spinup control queue. + * @this_controller: + * + * + */ +void scic_sds_controller_power_control_queue_insert( + struct scic_sds_controller *this_controller, + struct scic_sds_phy *the_phy) +{ + BUG_ON(the_phy == NULL); + + if ( + (this_controller->power_control.timer_started) + && (this_controller->power_control.requesters[the_phy->phy_index] == NULL) + ) { + this_controller->power_control.requesters[the_phy->phy_index] = the_phy; + this_controller->power_control.phys_waiting++; + } else { + scic_sds_controller_power_control_timer_start(this_controller); + scic_sds_phy_consume_power_handler(the_phy); + } +} + +/** + * This method removes the phy from the stagger spinup control queue. + * @this_controller: + * + * + */ +void scic_sds_controller_power_control_queue_remove( + struct scic_sds_controller *this_controller, + struct scic_sds_phy *the_phy) +{ + BUG_ON(the_phy == NULL); + + if (this_controller->power_control.requesters[the_phy->phy_index] != NULL) { + this_controller->power_control.phys_waiting--; + } + + this_controller->power_control.requesters[the_phy->phy_index] = NULL; +} + +/* + * ****************************************************************************- + * * SCIC SDS Controller Completion Routines + * ****************************************************************************- */ + +/** + * This method returns a true value if the completion queue has entries that + * can be processed + * @this_controller: + * + * bool true if the completion queue has entries to process false if the + * completion queue has no entries to process + */ +static bool scic_sds_controller_completion_queue_has_entries( + struct scic_sds_controller *this_controller) +{ + u32 get_value = this_controller->completion_queue_get; + u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; + + if ( + NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) + == COMPLETION_QUEUE_CYCLE_BIT(this_controller->completion_queue[get_index]) + ) { + return true; + } + + return false; +} + +/* --------------------------------------------------------------------------- */ + +/** + * This method processes a task completion notification. This is called from + * within the controller completion handler. + * @this_controller: + * @completion_entry: + * + */ +static void scic_sds_controller_task_completion( + struct scic_sds_controller *this_controller, + u32 completion_entry) +{ + u32 index; + struct scic_sds_request *io_request; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + io_request = this_controller->io_request_table[index]; + + /* Make sure that we really want to process this IO request */ + if ( + (io_request != SCI_INVALID_HANDLE) + && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) + && ( + scic_sds_io_tag_get_sequence(io_request->io_tag) + == this_controller->io_request_sequence[index] + ) + ) { + /* Yep this is a valid io request pass it along to the io request handler */ + scic_sds_io_request_tc_completion(io_request, completion_entry); + } +} + +/** + * This method processes an SDMA completion event. This is called from within + * the controller completion handler. + * @this_controller: + * @completion_entry: + * + */ +static void scic_sds_controller_sdma_completion( + struct scic_sds_controller *this_controller, + u32 completion_entry) +{ + u32 index; + struct scic_sds_request *io_request; + struct scic_sds_remote_device *device; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + switch (scu_get_command_request_type(completion_entry)) { + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: + io_request = this_controller->io_request_table[index]; + dev_warn(scic_to_dev(this_controller), + "%s: SCIC SDS Completion type SDMA %x for io request " + "%p\n", + __func__, + completion_entry, + io_request); + /* @todo For a post TC operation we need to fail the IO + * request + */ + break; + + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: + device = this_controller->device_table[index]; + dev_warn(scic_to_dev(this_controller), + "%s: SCIC SDS Completion type SDMA %x for remote " + "device %p\n", + __func__, + completion_entry, + device); + /* @todo For a port RNC operation we need to fail the + * device + */ + break; + + default: + dev_warn(scic_to_dev(this_controller), + "%s: SCIC SDS Completion unknown SDMA completion " + "type %x\n", + __func__, + completion_entry); + break; + + } +} + +/** + * + * @this_controller: + * @completion_entry: + * + * This method processes an unsolicited frame message. This is called from + * within the controller completion handler. none + */ +static void scic_sds_controller_unsolicited_frame( + struct scic_sds_controller *this_controller, + u32 completion_entry) +{ + u32 index; + u32 frame_index; + + struct scu_unsolicited_frame_header *frame_header; + struct scic_sds_phy *phy; + struct scic_sds_remote_device *device; + + enum sci_status result = SCI_FAILURE; + + frame_index = SCU_GET_FRAME_INDEX(completion_entry); + + frame_header + = this_controller->uf_control.buffers.array[frame_index].header; + this_controller->uf_control.buffers.array[frame_index].state + = UNSOLICITED_FRAME_IN_USE; + + if (SCU_GET_FRAME_ERROR(completion_entry)) { + /* + * / @todo If the IAF frame or SIGNATURE FIS frame has an error will + * / this cause a problem? We expect the phy initialization will + * / fail if there is an error in the frame. */ + scic_sds_controller_release_frame(this_controller, frame_index); + return; + } + + if (frame_header->is_address_frame) { + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &this_controller->phy_table[index]; + if (phy != NULL) { + result = scic_sds_phy_frame_handler(phy, frame_index); + } + } else { + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + /* + * This is a signature fis or a frame from a direct attached SATA + * device that has not yet been created. In either case forwared + * the frame to the PE and let it take care of the frame data. */ + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &this_controller->phy_table[index]; + result = scic_sds_phy_frame_handler(phy, frame_index); + } else { + if (index < this_controller->remote_node_entries) + device = this_controller->device_table[index]; + else + device = NULL; + + if (device != NULL) + result = scic_sds_remote_device_frame_handler(device, frame_index); + else + scic_sds_controller_release_frame(this_controller, frame_index); + } + } + + if (result != SCI_SUCCESS) { + /* + * / @todo Is there any reason to report some additional error message + * / when we get this failure notifiction? */ + } +} + +/** + * This method processes an event completion entry. This is called from within + * the controller completion handler. + * @this_controller: + * @completion_entry: + * + */ +static void scic_sds_controller_event_completion( + struct scic_sds_controller *this_controller, + u32 completion_entry) +{ + u32 index; + struct scic_sds_request *io_request; + struct scic_sds_remote_device *device; + struct scic_sds_phy *phy; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + switch (scu_get_event_type(completion_entry)) { + case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: + /* / @todo The driver did something wrong and we need to fix the condtion. */ + dev_err(scic_to_dev(this_controller), + "%s: SCIC Controller 0x%p received SMU command error " + "0x%x\n", + __func__, + this_controller, + completion_entry); + break; + + case SCU_EVENT_TYPE_SMU_PCQ_ERROR: + case SCU_EVENT_TYPE_SMU_ERROR: + case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR: + /* + * / @todo This is a hardware failure and its likely that we want to + * / reset the controller. */ + dev_err(scic_to_dev(this_controller), + "%s: SCIC Controller 0x%p received fatal controller " + "event 0x%x\n", + __func__, + this_controller, + completion_entry); + break; + + case SCU_EVENT_TYPE_TRANSPORT_ERROR: + io_request = this_controller->io_request_table[index]; + scic_sds_io_request_event_handler(io_request, completion_entry); + break; + + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + switch (scu_get_event_specifier(completion_entry)) { + case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: + case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: + io_request = this_controller->io_request_table[index]; + if (io_request != SCI_INVALID_HANDLE) + scic_sds_io_request_event_handler(io_request, completion_entry); + else + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller 0x%p received " + "event 0x%x for io request object " + "that doesnt exist.\n", + __func__, + this_controller, + completion_entry); + + break; + + case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: + device = this_controller->device_table[index]; + if (device != SCI_INVALID_HANDLE) + scic_sds_remote_device_event_handler(device, completion_entry); + else + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller 0x%p received " + "event 0x%x for remote device object " + "that doesnt exist.\n", + __func__, + this_controller, + completion_entry); + + break; + } + break; + + case SCU_EVENT_TYPE_BROADCAST_CHANGE: + /* + * direct the broadcast change event to the phy first and then let + * the phy redirect the broadcast change to the port object */ + case SCU_EVENT_TYPE_ERR_CNT_EVENT: + /* + * direct error counter event to the phy object since that is where + * we get the event notification. This is a type 4 event. */ + case SCU_EVENT_TYPE_OSSP_EVENT: + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &this_controller->phy_table[index]; + scic_sds_phy_event_handler(phy, completion_entry); + break; + + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + case SCU_EVENT_TYPE_RNC_OPS_MISC: + if (index < this_controller->remote_node_entries) { + device = this_controller->device_table[index]; + + if (device != NULL) + scic_sds_remote_device_event_handler(device, completion_entry); + } else + dev_err(scic_to_dev(this_controller), + "%s: SCIC Controller 0x%p received event 0x%x " + "for remote device object 0x%0x that doesnt " + "exist.\n", + __func__, + this_controller, + completion_entry, + index); + + break; + + default: + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller received unknown event code %x\n", + __func__, + completion_entry); + break; + } +} + +/** + * This method is a private routine for processing the completion queue entries. + * @this_controller: + * + */ +static void scic_sds_controller_process_completions( + struct scic_sds_controller *this_controller) +{ + u32 completion_count = 0; + u32 completion_entry; + u32 get_index; + u32 get_cycle; + u32 event_index; + u32 event_cycle; + + dev_dbg(scic_to_dev(this_controller), + "%s: completion queue begining get:0x%08x\n", + __func__, + this_controller->completion_queue_get); + + /* Get the component parts of the completion queue */ + get_index = NORMALIZE_GET_POINTER(this_controller->completion_queue_get); + get_cycle = SMU_CQGR_CYCLE_BIT & this_controller->completion_queue_get; + + event_index = NORMALIZE_EVENT_POINTER(this_controller->completion_queue_get); + event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & this_controller->completion_queue_get; + + while ( + NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) + == COMPLETION_QUEUE_CYCLE_BIT(this_controller->completion_queue[get_index]) + ) { + completion_count++; + + completion_entry = this_controller->completion_queue[get_index]; + INCREMENT_COMPLETION_QUEUE_GET(this_controller, get_index, get_cycle); + + dev_dbg(scic_to_dev(this_controller), + "%s: completion queue entry:0x%08x\n", + __func__, + completion_entry); + + switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { + case SCU_COMPLETION_TYPE_TASK: + scic_sds_controller_task_completion(this_controller, completion_entry); + break; + + case SCU_COMPLETION_TYPE_SDMA: + scic_sds_controller_sdma_completion(this_controller, completion_entry); + break; + + case SCU_COMPLETION_TYPE_UFI: + scic_sds_controller_unsolicited_frame(this_controller, completion_entry); + break; + + case SCU_COMPLETION_TYPE_EVENT: + INCREMENT_EVENT_QUEUE_GET(this_controller, event_index, event_cycle); + scic_sds_controller_event_completion(this_controller, completion_entry); + break; + + case SCU_COMPLETION_TYPE_NOTIFY: + /* + * Presently we do the same thing with a notify event that we do with the + * other event codes. */ + INCREMENT_EVENT_QUEUE_GET(this_controller, event_index, event_cycle); + scic_sds_controller_event_completion(this_controller, completion_entry); + break; + + default: + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller received unknown " + "completion type %x\n", + __func__, + completion_entry); + break; + } + } + + /* Update the get register if we completed one or more entries */ + if (completion_count > 0) { + this_controller->completion_queue_get = + SMU_CQGR_GEN_BIT(ENABLE) + | SMU_CQGR_GEN_BIT(EVENT_ENABLE) + | event_cycle | SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) + | get_cycle | SMU_CQGR_GEN_VAL(POINTER, get_index); + + SMU_CQGR_WRITE(this_controller, + this_controller->completion_queue_get); + } + + dev_dbg(scic_to_dev(this_controller), + "%s: completion queue ending get:0x%08x\n", + __func__, + this_controller->completion_queue_get); + +} + +/** + * This method is a private routine for processing the completion queue entries. + * @this_controller: + * + */ +static void scic_sds_controller_transitioned_process_completions( + struct scic_sds_controller *this_controller) +{ + u32 completion_count = 0; + u32 completion_entry; + u32 get_index; + u32 get_cycle; + u32 event_index; + u32 event_cycle; + + dev_dbg(scic_to_dev(this_controller), + "%s: completion queue begining get:0x%08x\n", + __func__, + this_controller->completion_queue_get); + + /* Get the component parts of the completion queue */ + get_index = NORMALIZE_GET_POINTER(this_controller->completion_queue_get); + get_cycle = SMU_CQGR_CYCLE_BIT & this_controller->completion_queue_get; + + event_index = NORMALIZE_EVENT_POINTER(this_controller->completion_queue_get); + event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & this_controller->completion_queue_get; + + while ( + NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) + == COMPLETION_QUEUE_CYCLE_BIT( + this_controller->completion_queue[get_index]) + ) { + completion_count++; + + completion_entry = this_controller->completion_queue[get_index]; + INCREMENT_COMPLETION_QUEUE_GET(this_controller, get_index, get_cycle); + + dev_dbg(scic_to_dev(this_controller), + "%s: completion queue entry:0x%08x\n", + __func__, + completion_entry); + + switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { + case SCU_COMPLETION_TYPE_TASK: + scic_sds_controller_task_completion(this_controller, completion_entry); + break; + + case SCU_COMPLETION_TYPE_NOTIFY: + case SCU_COMPLETION_TYPE_EVENT: + /* + * Presently we do the same thing with a notify event that we + * do with the other event codes. */ + INCREMENT_EVENT_QUEUE_GET(this_controller, event_index, event_cycle); + /* Fall-through */ + + case SCU_COMPLETION_TYPE_SDMA: + case SCU_COMPLETION_TYPE_UFI: + default: + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller ignoring completion type " + "%x\n", + __func__, + completion_entry); + break; + } + } + + /* Update the get register if we completed one or more entries */ + if (completion_count > 0) { + this_controller->completion_queue_get = + SMU_CQGR_GEN_BIT(ENABLE) + | SMU_CQGR_GEN_BIT(EVENT_ENABLE) + | event_cycle | SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) + | get_cycle | SMU_CQGR_GEN_VAL(POINTER, get_index); + + SMU_CQGR_WRITE(this_controller, this_controller->completion_queue_get); + } + + dev_dbg(scic_to_dev(this_controller), + "%s: completion queue ending get:0x%08x\n", + __func__, + this_controller->completion_queue_get); +} + +/* + * ****************************************************************************- + * * SCIC SDS Controller Interrupt and Completion functions + * ****************************************************************************- */ + +/** + * This method provides standard (common) processing of interrupts for polling + * and legacy based interrupts. + * @controller: + * @interrupt_status: + * + * This method returns a boolean (bool) indication as to whether an completions + * are pending to be processed. true if an interrupt is to be processed false + * if no interrupt was pending + */ +static bool scic_sds_controller_standard_interrupt_handler( + struct scic_sds_controller *this_controller, + u32 interrupt_status) +{ + bool is_completion_needed = false; + + if ((interrupt_status & SMU_ISR_QUEUE_ERROR) || + ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && + (!scic_sds_controller_completion_queue_has_entries( + this_controller)))) { + /* + * We have a fatal error on the read of the completion queue bar + * OR + * We have a fatal error there is nothing in the completion queue + * but we have a report from the hardware that the queue is full + * / @todo how do we request the a controller reset */ + is_completion_needed = true; + this_controller->encountered_fatal_error = true; + } + + if (scic_sds_controller_completion_queue_has_entries(this_controller)) { + is_completion_needed = true; + } + + return is_completion_needed; +} + +/** + * This is the method provided to handle polling for interrupts for the + * controller object. + * + * bool true if an interrupt is to be processed false if no interrupt was + * pending + */ +static bool scic_sds_controller_polling_interrupt_handler( + struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + /* + * In INTERRUPT_POLLING_MODE we exit the interrupt handler if the + * hardware indicates nothing is pending. Since we are not being + * called from a real interrupt, we don't want to confuse the hardware + * by servicing the completion queue before the hardware indicates it + * is ready. We'll simply wait for another polling interval and check + * again. + */ + interrupt_status = SMU_ISR_READ(scic); + if ((interrupt_status & + (SMU_ISR_COMPLETION | + SMU_ISR_QUEUE_ERROR | + SMU_ISR_QUEUE_SUSPEND)) == 0) { + return false; + } + + return scic_sds_controller_standard_interrupt_handler( + scic, interrupt_status); +} + +/** + * This is the method provided to handle completions when interrupt polling is + * in use. + */ +static void scic_sds_controller_polling_completion_handler( + struct scic_sds_controller *scic) +{ + if (scic->encountered_fatal_error == true) { + dev_err(scic_to_dev(scic), + "%s: SCIC Controller has encountered a fatal error.\n", + __func__); + + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_FAILED); + } else if (scic_sds_controller_completion_queue_has_entries(scic)) { + if (scic->restrict_completions == false) + scic_sds_controller_process_completions(scic); + else + scic_sds_controller_transitioned_process_completions( + scic); + } + + /* + * The interrupt handler does not adjust the CQ's + * get pointer. So, SCU's INTx pin stays asserted during the + * interrupt handler even though it tries to clear the interrupt + * source. Therefore, the completion handler must ensure that the + * interrupt source is cleared. Otherwise, we get a spurious + * interrupt for which the interrupt handler will not issue a + * corresponding completion event. Also, we unmask interrupts. + */ + SMU_ISR_WRITE( + scic, + (u32)(SMU_ISR_COMPLETION | SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND) + ); +} + +/** + * This is the method provided to handle legacy interrupts for the controller + * object. + * + * bool true if an interrupt is processed false if no interrupt was processed + */ +static bool scic_sds_controller_legacy_interrupt_handler( + struct scic_sds_controller *scic) +{ + u32 interrupt_status; + bool is_completion_needed; + + interrupt_status = SMU_ISR_READ(scic); + is_completion_needed = scic_sds_controller_standard_interrupt_handler( + scic, interrupt_status); + + return is_completion_needed; +} + + +/** + * This is the method provided to handle legacy completions it is expected that + * the SCI User will call this completion handler anytime the interrupt + * handler reports that it has handled an interrupt. + */ +static void scic_sds_controller_legacy_completion_handler( + struct scic_sds_controller *scic) +{ + scic_sds_controller_polling_completion_handler(scic); + SMU_IMR_WRITE(scic, 0x00000000); +} + +/** + * This is the method provided to handle an MSIX interrupt message when there + * is just a single MSIX message being provided by the hardware. This mode + * of operation is single vector mode. + * + * bool true if an interrupt is processed false if no interrupt was processed + */ +static bool scic_sds_controller_single_vector_interrupt_handler( + struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + /* + * Mask the interrupts + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will unmask + * the interrupts in the completion routine. */ + SMU_IMR_WRITE(scic, 0xFFFFFFFF); + + interrupt_status = SMU_ISR_READ(scic); + interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); + + if ((interrupt_status == 0) && + scic_sds_controller_completion_queue_has_entries(scic)) { + /* + * There is at least one completion queue entry to process so we can + * return a success and ignore for now the case of an error interrupt */ + SMU_ISR_WRITE(scic, SMU_ISR_COMPLETION); + return true; + } + + if (interrupt_status != 0) { + /* + * There is an error interrupt pending so let it through and handle + * in the callback */ + return true; + } + + /* + * Clear any offending interrupts since we could not find any to handle + * and unmask them all */ + SMU_ISR_WRITE(scic, 0x00000000); + SMU_IMR_WRITE(scic, 0x00000000); + + return false; +} + +/** + * This is the method provided to handle completions for a single MSIX message. + */ +static void scic_sds_controller_single_vector_completion_handler( + struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + interrupt_status = SMU_ISR_READ(scic); + interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); + + if (interrupt_status & SMU_ISR_QUEUE_ERROR) { + dev_err(scic_to_dev(scic), + "%s: SCIC Controller has encountered a fatal error.\n", + __func__); + + /* + * We have a fatal condition and must reset the controller + * Leave the interrupt mask in place and get the controller reset */ + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_FAILED); + return; + } + + if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && + !scic_sds_controller_completion_queue_has_entries(scic)) { + dev_err(scic_to_dev(scic), + "%s: SCIC Controller has encountered a fatal error.\n", + __func__); + + /* + * We have a fatal condtion and must reset the controller + * Leave the interrupt mask in place and get the controller reset */ + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_FAILED); + return; + } + + if (scic_sds_controller_completion_queue_has_entries(scic)) { + scic_sds_controller_process_completions(scic); + + /* + * We dont care which interrupt got us to processing the completion queu + * so clear them both. */ + SMU_ISR_WRITE( + scic, + (SMU_ISR_COMPLETION | SMU_ISR_QUEUE_SUSPEND)); + } + + SMU_IMR_WRITE(scic, 0x00000000); +} + +/** + * This is the method provided to handle a MSIX message for a normal completion. + * + * bool true if an interrupt is processed false if no interrupt was processed + */ +static bool scic_sds_controller_normal_vector_interrupt_handler( + struct scic_sds_controller *scic) +{ + if (scic_sds_controller_completion_queue_has_entries(scic)) { + return true; + } else { + /* + * we have a spurious interrupt it could be that we have already + * emptied the completion queue from a previous interrupt */ + SMU_ISR_WRITE(scic, SMU_ISR_COMPLETION); + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the interrupts so if there is another interrupt pending + * the clearing of the interrupt source we get the next interrupt message. */ + SMU_IMR_WRITE(scic, 0xFF000000); + SMU_IMR_WRITE(scic, 0x00000000); + } + + return false; +} + +/** + * This is the method provided to handle the completions for a normal MSIX + * message. + */ +static void scic_sds_controller_normal_vector_completion_handler( + struct scic_sds_controller *scic) +{ + /* Empty out the completion queue */ + if (scic_sds_controller_completion_queue_has_entries(scic)) + scic_sds_controller_process_completions(scic); + + /* Clear the interrupt and enable all interrupts again */ + SMU_ISR_WRITE(scic, SMU_ISR_COMPLETION); + /* Could we write the value of SMU_ISR_COMPLETION? */ + SMU_IMR_WRITE(scic, 0xFF000000); + SMU_IMR_WRITE(scic, 0x00000000); +} + +/** + * This is the method provided to handle the error MSIX message interrupt. + * This is the normal operating mode for the hardware if MSIX is enabled. + * + * bool true if an interrupt is processed false if no interrupt was processed + */ +static bool scic_sds_controller_error_vector_interrupt_handler( + struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + interrupt_status = SMU_ISR_READ(scic); + interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); + + if (interrupt_status != 0) { + /* + * There is an error interrupt pending so let it through and handle + * in the callback */ + return true; + } + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the error interrupts so if there was another interrupt + * pending we will be notified. + * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ + SMU_IMR_WRITE(scic, 0x000000FF); + SMU_IMR_WRITE(scic, 0x00000000); + + return false; +} + +/** + * This is the method provided to handle the error completions when the + * hardware is using two MSIX messages. + */ +static void scic_sds_controller_error_vector_completion_handler( + struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + interrupt_status = SMU_ISR_READ(scic); + + if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && + scic_sds_controller_completion_queue_has_entries(scic)) { + + scic_sds_controller_process_completions(scic); + SMU_ISR_WRITE(scic, SMU_ISR_QUEUE_SUSPEND); + + } else { + dev_err(scic_to_dev(scic), + "%s: SCIC Controller reports CRC error on completion " + "ISR %x\n", + __func__, + interrupt_status); + + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_FAILED); + + return; + } + + /* + * If we dont process any completions I am not sure that we want to do this. + * We are in the middle of a hardware fault and should probably be reset. */ + SMU_IMR_WRITE(scic, 0x00000000); +} + + +/* + * ****************************************************************************- + * * SCIC SDS Controller External Methods + * ****************************************************************************- */ + +/** + * This method returns the sizeof the SCIC SDS Controller Object + */ +u32 scic_sds_controller_get_object_size(void) +{ + return sizeof(struct scic_sds_controller); +} + + +void scic_sds_controller_link_up( + struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + scic_sds_controller_phy_handler_t link_up; + u32 state; + + state = scic->parent.state_machine.current_state_id; + link_up = scic_sds_controller_state_handler_table[state].link_up; + + if (link_up) + link_up(scic, sci_port, sci_phy); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller linkup event from phy %d in " + "unexpected state %d\n", + __func__, + sci_phy->phy_index, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + scic))); +} + + +void scic_sds_controller_link_down( + struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + u32 state; + scic_sds_controller_phy_handler_t link_down; + + state = scic->parent.state_machine.current_state_id; + link_down = scic_sds_controller_state_handler_table[state].link_down; + + if (link_down) + link_down(scic, sci_port, sci_phy); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller linkdown event from phy %d in " + "unexpected state %d\n", + __func__, + sci_phy->phy_index, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + scic))); +} + +/** + * This method will write to the SCU PCP register the request value. The method + * is used to suspend/resume ports, devices, and phys. + * @this_controller: + * + * + */ +void scic_sds_controller_post_request( + struct scic_sds_controller *this_controller, + u32 request) +{ + dev_dbg(scic_to_dev(this_controller), + "%s: SCIC Controller 0x%p post request 0x%08x\n", + __func__, + this_controller, + request); + + SMU_PCP_WRITE(this_controller, request); +} + +/** + * This method will copy the soft copy of the task context into the physical + * memory accessible by the controller. + * @this_controller: This parameter specifies the controller for which to copy + * the task context. + * @this_request: This parameter specifies the request for which the task + * context is being copied. + * + * After this call is made the SCIC_SDS_IO_REQUEST object will always point to + * the physical memory version of the task context. Thus, all subsequent + * updates to the task context are performed in the TC table (i.e. DMAable + * memory). none + */ +void scic_sds_controller_copy_task_context( + struct scic_sds_controller *this_controller, + struct scic_sds_request *this_request) +{ + struct scu_task_context *task_context_buffer; + + task_context_buffer = scic_sds_controller_get_task_context_buffer( + this_controller, this_request->io_tag + ); + + memcpy( + task_context_buffer, + this_request->task_context_buffer, + SCI_FIELD_OFFSET(struct scu_task_context, sgl_snapshot_ac) + ); + + /* + * Now that the soft copy of the TC has been copied into the TC + * table accessible by the silicon. Thus, any further changes to + * the TC (e.g. TC termination) occur in the appropriate location. */ + this_request->task_context_buffer = task_context_buffer; +} + +/** + * This method returns the task context buffer for the given io tag. + * @this_controller: + * @io_tag: + * + * struct scu_task_context* + */ +struct scu_task_context *scic_sds_controller_get_task_context_buffer( + struct scic_sds_controller *this_controller, + u16 io_tag + ) { + u16 task_index = scic_sds_io_tag_get_index(io_tag); + + if (task_index < this_controller->task_context_entries) { + return &this_controller->task_context_table[task_index]; + } + + return NULL; +} + +/** + * This method returnst the sequence value from the io tag value + * @this_controller: + * @io_tag: + * + * u16 + */ + +/** + * This method returns the IO request associated with the tag value + * @this_controller: + * @io_tag: + * + * SCIC_SDS_IO_REQUEST_T* NULL if there is no valid IO request at the tag value + */ +struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( + struct scic_sds_controller *this_controller, + u16 io_tag + ) { + u16 task_index; + u16 task_sequence; + + task_index = scic_sds_io_tag_get_index(io_tag); + + if (task_index < this_controller->task_context_entries) { + if (this_controller->io_request_table[task_index] != SCI_INVALID_HANDLE) { + task_sequence = scic_sds_io_tag_get_sequence(io_tag); + + if (task_sequence == this_controller->io_request_sequence[task_index]) { + return this_controller->io_request_table[task_index]; + } + } + } + + return SCI_INVALID_HANDLE; +} + +/** + * This method allocates remote node index and the reserves the remote node + * context space for use. This method can fail if there are no more remote + * node index available. + * @this_controller: This is the controller object which contains the set of + * free remote node ids + * @the_devce: This is the device object which is requesting the a remote node + * id + * @node_id: This is the remote node id that is assinged to the device if one + * is available + * + * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote + * node index available. + */ +enum sci_status scic_sds_controller_allocate_remote_node_context( + struct scic_sds_controller *this_controller, + struct scic_sds_remote_device *the_device, + u16 *node_id) +{ + u16 node_index; + u32 remote_node_count = scic_sds_remote_device_node_count(the_device); + + node_index = scic_sds_remote_node_table_allocate_remote_node( + &this_controller->available_remote_nodes, remote_node_count + ); + + if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + this_controller->device_table[node_index] = the_device; + + *node_id = node_index; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INSUFFICIENT_RESOURCES; +} + +/** + * This method frees the remote node index back to the available pool. Once + * this is done the remote node context buffer is no longer valid and can + * not be used. + * @this_controller: + * @the_device: + * @node_id: + * + */ +void scic_sds_controller_free_remote_node_context( + struct scic_sds_controller *this_controller, + struct scic_sds_remote_device *the_device, + u16 node_id) +{ + u32 remote_node_count = scic_sds_remote_device_node_count(the_device); + + if (this_controller->device_table[node_id] == the_device) { + this_controller->device_table[node_id] = SCI_INVALID_HANDLE; + + scic_sds_remote_node_table_release_remote_node_index( + &this_controller->available_remote_nodes, remote_node_count, node_id + ); + } +} + +/** + * This method returns the union scu_remote_node_context for the specified remote + * node id. + * @this_controller: + * @node_id: + * + * union scu_remote_node_context* + */ +union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( + struct scic_sds_controller *this_controller, + u16 node_id + ) { + if ( + (node_id < this_controller->remote_node_entries) + && (this_controller->device_table[node_id] != SCI_INVALID_HANDLE) + ) { + return &this_controller->remote_node_context_table[node_id]; + } + + return NULL; +} + +/** + * + * @resposne_buffer: This is the buffer into which the D2H register FIS will be + * constructed. + * @frame_header: This is the frame header returned by the hardware. + * @frame_buffer: This is the frame buffer returned by the hardware. + * + * This method will combind the frame header and frame buffer to create a SATA + * D2H register FIS none + */ +void scic_sds_controller_copy_sata_response( + void *response_buffer, + void *frame_header, + void *frame_buffer) +{ + memcpy( + response_buffer, + frame_header, + sizeof(u32) + ); + + memcpy( + (char *)((char *)response_buffer + sizeof(u32)), + frame_buffer, + sizeof(struct sata_fis_reg_d2h) - sizeof(u32) + ); +} + +/** + * This method releases the frame once this is done the frame is available for + * re-use by the hardware. The data contained in the frame header and frame + * buffer is no longer valid. The UF queue get pointer is only updated if UF + * control indicates this is appropriate. + * @this_controller: + * @frame_index: + * + */ +void scic_sds_controller_release_frame( + struct scic_sds_controller *this_controller, + u32 frame_index) +{ + if (scic_sds_unsolicited_frame_control_release_frame( + &this_controller->uf_control, frame_index) == true) + SCU_UFQGP_WRITE(this_controller, this_controller->uf_control.get); +} + +/** + * This method sets user parameters and OEM parameters to default values. + * Users can override these values utilizing the scic_user_parameters_set() + * and scic_oem_parameters_set() methods. + * @controller: This parameter specifies the controller for which to set the + * configuration parameters to their default values. + * + */ +static void scic_sds_controller_set_default_config_parameters( + struct scic_sds_controller *this_controller) +{ + u16 index; + + /* Default to no SSC operation. */ + this_controller->oem_parameters.sds1.controller.do_enable_ssc = false; + + /* Initialize all of the port parameter information to narrow ports. */ + for (index = 0; index < SCI_MAX_PORTS; index++) { + this_controller->oem_parameters.sds1.ports[index].phy_mask = 0; + } + + /* Initialize all of the phy parameter information. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* + * Default to 3G (i.e. Gen 2) for now. User can override if + * they choose. */ + this_controller->user_parameters.sds1.phys[index].max_speed_generation = 2; + + /* + * Previous Vitesse based expanders had a arbitration issue that + * is worked around by having the upper 32-bits of SAS address + * with a value greater then the Vitesse company identifier. + * Hence, usage of 0x5FCFFFFF. */ + this_controller->oem_parameters.sds1.phys[index].sas_address.low + = 0x00000001; + this_controller->oem_parameters.sds1.phys[index].sas_address.high + = 0x5FCFFFFF; + } + + this_controller->user_parameters.sds1.stp_inactivity_timeout = 5; + this_controller->user_parameters.sds1.ssp_inactivity_timeout = 5; + this_controller->user_parameters.sds1.stp_max_occupancy_timeout = 5; + this_controller->user_parameters.sds1.ssp_max_occupancy_timeout = 20; + this_controller->user_parameters.sds1.no_outbound_task_timeout = 5; + +} + + +enum sci_status scic_controller_construct(struct scic_sds_controller *controller, + void __iomem *scu_base, + void __iomem *smu_base) +{ + u8 index; + + sci_base_controller_construct( + &controller->parent, + scic_sds_controller_state_table, + controller->memory_descriptors, + ARRAY_SIZE(controller->memory_descriptors), + NULL + ); + + controller->scu_registers = scu_base; + controller->smu_registers = smu_base; + + scic_sds_port_configuration_agent_construct(&controller->port_agent); + + /* Construct the ports for this controller */ + for (index = 0; index < SCI_MAX_PORTS; index++) + scic_sds_port_construct(&controller->port_table[index], + index, controller); + scic_sds_port_construct(&controller->port_table[index], + SCIC_SDS_DUMMY_PORT, controller); + + /* Construct the phys for this controller */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* Add all the PHYs to the dummy port */ + scic_sds_phy_construct( + &controller->phy_table[index], + &controller->port_table[SCI_MAX_PORTS], + index + ); + } + + controller->invalid_phy_mask = 0; + + /* Set the default maximum values */ + controller->completion_event_entries = SCU_EVENT_COUNT; + controller->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; + controller->remote_node_entries = SCI_MAX_REMOTE_DEVICES; + controller->logical_port_entries = SCI_MAX_PORTS; + controller->task_context_entries = SCU_IO_REQUEST_COUNT; + controller->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT; + controller->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT; + + /* Initialize the User and OEM parameters to default values. */ + scic_sds_controller_set_default_config_parameters(controller); + + return SCI_SUCCESS; +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_initialize( + struct scic_sds_controller *scic) +{ + enum sci_status status = SCI_FAILURE_INVALID_STATE; + sci_base_controller_handler_t initialize; + u32 state; + + state = scic->parent.state_machine.current_state_id; + initialize = scic_sds_controller_state_handler_table[state].base.initialize; + + if (initialize) + status = initialize(&scic->parent); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller initialize operation requested " + "in invalid state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + scic))); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +u32 scic_controller_get_suggested_start_timeout( + struct scic_sds_controller *sc) +{ + /* Validate the user supplied parameters. */ + if (sc == SCI_INVALID_HANDLE) + return 0; + + /* + * The suggested minimum timeout value for a controller start operation: + * + * Signature FIS Timeout + * + Phy Start Timeout + * + Number of Phy Spin Up Intervals + * --------------------------------- + * Number of milliseconds for the controller start operation. + * + * NOTE: The number of phy spin up intervals will be equivalent + * to the number of phys divided by the number phys allowed + * per interval - 1 (once OEM parameters are supported). + * Currently we assume only 1 phy per interval. */ + + return (SCIC_SDS_SIGNATURE_FIS_TIMEOUT + + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT + + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL)); +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_start( + struct scic_sds_controller *scic, + u32 timeout) +{ + enum sci_status status = SCI_FAILURE_INVALID_STATE; + sci_base_controller_timed_handler_t start; + u32 state; + + state = scic->parent.state_machine.current_state_id; + start = scic_sds_controller_state_handler_table[state].base.start; + + if (start) + status = start(&scic->parent, timeout); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller start operation requested in " + "invalid state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + scic))); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_stop( + struct scic_sds_controller *scic, + u32 timeout) +{ + enum sci_status status = SCI_FAILURE_INVALID_STATE; + sci_base_controller_timed_handler_t stop; + u32 state; + + state = scic->parent.state_machine.current_state_id; + stop = scic_sds_controller_state_handler_table[state].base.stop; + + if (stop) + status = stop(&scic->parent, timeout); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller stop operation requested in " + "invalid state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + scic))); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_reset( + struct scic_sds_controller *scic) +{ + enum sci_status status = SCI_FAILURE_INVALID_STATE; + sci_base_controller_handler_t reset; + u32 state; + + state = scic->parent.state_machine.current_state_id; + reset = scic_sds_controller_state_handler_table[state].base.reset; + + if (reset) + status = reset(&scic->parent); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller reset operation requested in " + "invalid state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + scic))); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_get_handler_methods( + enum scic_interrupt_type interrupt_type, + u16 message_count, + struct scic_controller_handler_methods *handler_methods) +{ + enum sci_status status = SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT; + + switch (interrupt_type) { + case SCIC_LEGACY_LINE_INTERRUPT_TYPE: + if (message_count == 0) { + handler_methods[0].interrupt_handler + = scic_sds_controller_legacy_interrupt_handler; + handler_methods[0].completion_handler + = scic_sds_controller_legacy_completion_handler; + + status = SCI_SUCCESS; + } + break; + + case SCIC_MSIX_INTERRUPT_TYPE: + if (message_count == 1) { + handler_methods[0].interrupt_handler + = scic_sds_controller_single_vector_interrupt_handler; + handler_methods[0].completion_handler + = scic_sds_controller_single_vector_completion_handler; + + status = SCI_SUCCESS; + } else if (message_count == 2) { + handler_methods[0].interrupt_handler + = scic_sds_controller_normal_vector_interrupt_handler; + handler_methods[0].completion_handler + = scic_sds_controller_normal_vector_completion_handler; + + handler_methods[1].interrupt_handler + = scic_sds_controller_error_vector_interrupt_handler; + handler_methods[1].completion_handler + = scic_sds_controller_error_vector_completion_handler; + + status = SCI_SUCCESS; + } + break; + + case SCIC_NO_INTERRUPTS: + if (message_count == 0) { + + handler_methods[0].interrupt_handler + = scic_sds_controller_polling_interrupt_handler; + handler_methods[0].completion_handler + = scic_sds_controller_polling_completion_handler; + + status = SCI_SUCCESS; + } + break; + + default: + status = SCI_FAILURE_INVALID_PARAMETER_VALUE; + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +enum sci_io_status scic_controller_start_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request, + u16 io_tag) +{ + u32 state; + sci_base_controller_start_request_handler_t start_io; + + state = scic->parent.state_machine.current_state_id; + start_io = scic_sds_controller_state_handler_table[state].base.start_io; + + return start_io(&scic->parent, + (struct sci_base_remote_device *) remote_device, + (struct sci_base_request *)io_request, io_tag); +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_terminate_request( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *request) +{ + sci_base_controller_request_handler_t terminate_request; + u32 state; + + state = scic->parent.state_machine.current_state_id; + terminate_request = scic_sds_controller_state_handler_table[state].terminate_request; + + return terminate_request(&scic->parent, + (struct sci_base_remote_device *)remote_device, + (struct sci_base_request *)request); +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_complete_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request) +{ + u32 state; + sci_base_controller_request_handler_t complete_io; + + state = scic->parent.state_machine.current_state_id; + complete_io = scic_sds_controller_state_handler_table[state].base.complete_io; + + return complete_io(&scic->parent, + (struct sci_base_remote_device *)remote_device, + (struct sci_base_request *)io_request); +} + +/* --------------------------------------------------------------------------- */ + + +enum sci_task_status scic_controller_start_task( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *task_request, + u16 task_tag) +{ + u32 state; + sci_base_controller_start_request_handler_t start_task; + enum sci_task_status status = SCI_TASK_FAILURE_INVALID_STATE; + + state = scic->parent.state_machine.current_state_id; + start_task = scic_sds_controller_state_handler_table[state].base.start_task; + + if (start_task) + status = start_task(&scic->parent, + (struct sci_base_remote_device *)remote_device, + (struct sci_base_request *)task_request, + task_tag); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller starting task from invalid " + "state\n", + __func__); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_complete_task( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *task_request) +{ + u32 state; + sci_base_controller_request_handler_t complete_task; + enum sci_status status = SCI_FAILURE_INVALID_STATE; + + state = scic->parent.state_machine.current_state_id; + complete_task = scic_sds_controller_state_handler_table[state].base.complete_task; + + if (complete_task) + status = complete_task(&scic->parent, + (struct sci_base_remote_device *)remote_device, + (struct sci_base_request *)task_request); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller completing task from invalid " + "state\n", + __func__); + + return status; +} + + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_get_port_handle( + struct scic_sds_controller *scic, + u8 port_index, + struct scic_sds_port **port_handle) +{ + if (port_index < scic->logical_port_entries) { + *port_handle = &scic->port_table[port_index]; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PORT; +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_get_phy_handle( + struct scic_sds_controller *scic, + u8 phy_index, + struct scic_sds_phy **phy_handle) +{ + if (phy_index < ARRAY_SIZE(scic->phy_table)) { + *phy_handle = &scic->phy_table[phy_index]; + + return SCI_SUCCESS; + } + + dev_err(scic_to_dev(scic), + "%s: Controller:0x%p PhyId:0x%x invalid phy index\n", + __func__, scic, phy_index); + + return SCI_FAILURE_INVALID_PHY; +} + +/* --------------------------------------------------------------------------- */ + +u16 scic_controller_allocate_io_tag( + struct scic_sds_controller *scic) +{ + u16 task_context; + u16 sequence_count; + + if (!sci_pool_empty(scic->tci_pool)) { + sci_pool_get(scic->tci_pool, task_context); + + sequence_count = scic->io_request_sequence[task_context]; + + return scic_sds_io_tag_construct(sequence_count, task_context); + } + + return SCI_CONTROLLER_INVALID_IO_TAG; +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_free_io_tag( + struct scic_sds_controller *scic, + u16 io_tag) +{ + u16 sequence; + u16 index; + + BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG); + + sequence = scic_sds_io_tag_get_sequence(io_tag); + index = scic_sds_io_tag_get_index(io_tag); + + if (!sci_pool_full(scic->tci_pool)) { + if (sequence == scic->io_request_sequence[index]) { + scic_sds_io_sequence_increment( + scic->io_request_sequence[index]); + + sci_pool_put(scic->tci_pool, index); + + return SCI_SUCCESS; + } + } + + return SCI_FAILURE_INVALID_IO_TAG; +} + +/* --------------------------------------------------------------------------- */ + +void scic_controller_enable_interrupts( + struct scic_sds_controller *scic) +{ + BUG_ON(scic->smu_registers == NULL); + SMU_IMR_WRITE(scic, 0x00000000); +} + +/* --------------------------------------------------------------------------- */ + +void scic_controller_disable_interrupts( + struct scic_sds_controller *scic) +{ + BUG_ON(scic->smu_registers == NULL); + SMU_IMR_WRITE(scic, 0xffffffff); +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_controller_set_mode( + struct scic_sds_controller *scic, + enum sci_controller_mode operating_mode) +{ + enum sci_status status = SCI_SUCCESS; + + if ((scic->parent.state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_INITIALIZING) || + (scic->parent.state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_INITIALIZED)) { + switch (operating_mode) { + case SCI_MODE_SPEED: + scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; + scic->task_context_entries = SCU_IO_REQUEST_COUNT; + scic->uf_control.buffers.count = + SCU_UNSOLICITED_FRAME_COUNT; + scic->completion_event_entries = SCU_EVENT_COUNT; + scic->completion_queue_entries = + SCU_COMPLETION_QUEUE_COUNT; + scic_sds_controller_build_memory_descriptor_table(scic); + break; + + case SCI_MODE_SIZE: + scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES; + scic->task_context_entries = SCI_MIN_IO_REQUESTS; + scic->uf_control.buffers.count = + SCU_MIN_UNSOLICITED_FRAMES; + scic->completion_event_entries = SCU_MIN_EVENTS; + scic->completion_queue_entries = + SCU_MIN_COMPLETION_QUEUE_ENTRIES; + scic_sds_controller_build_memory_descriptor_table(scic); + break; + + default: + status = SCI_FAILURE_INVALID_PARAMETER_VALUE; + break; + } + } else + status = SCI_FAILURE_INVALID_STATE; + + return status; +} + +/** + * scic_sds_controller_reset_hardware() - + * + * This method will reset the controller hardware. + */ +void scic_sds_controller_reset_hardware( + struct scic_sds_controller *scic) +{ + /* Disable interrupts so we dont take any spurious interrupts */ + scic_controller_disable_interrupts(scic); + + /* Reset the SCU */ + SMU_SMUSRCR_WRITE(scic, 0xFFFFFFFF); + + /* Delay for 1ms to before clearing the CQP and UFQPR. */ + scic_cb_stall_execution(1000); + + /* The write to the CQGR clears the CQP */ + SMU_CQGR_WRITE(scic, 0x00000000); + + /* The write to the UFQGP clears the UFQPR */ + SCU_UFQGP_WRITE(scic, 0x00000000); +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_user_parameters_set( + struct scic_sds_controller *scic, + union scic_user_parameters *scic_parms) +{ + if ( + (scic->parent.state_machine.current_state_id + == SCI_BASE_CONTROLLER_STATE_RESET) + || (scic->parent.state_machine.current_state_id + == SCI_BASE_CONTROLLER_STATE_INITIALIZING) + || (scic->parent.state_machine.current_state_id + == SCI_BASE_CONTROLLER_STATE_INITIALIZED) + ) { + u16 index; + + /* + * Validate the user parameters. If they are not legal, then + * return a failure. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (! + (scic_parms->sds1.phys[index].max_speed_generation + <= SCIC_SDS_PARM_MAX_SPEED + && scic_parms->sds1.phys[index].max_speed_generation + > SCIC_SDS_PARM_NO_SPEED + ) + ) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms)); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +/* --------------------------------------------------------------------------- */ + +void scic_user_parameters_get( + struct scic_sds_controller *scic, + union scic_user_parameters *scic_parms) +{ + memcpy(scic_parms, (&scic->user_parameters), sizeof(*scic_parms)); +} + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_oem_parameters_set( + struct scic_sds_controller *scic, + union scic_oem_parameters *scic_parms) +{ + if ( + (scic->parent.state_machine.current_state_id + == SCI_BASE_CONTROLLER_STATE_RESET) + || (scic->parent.state_machine.current_state_id + == SCI_BASE_CONTROLLER_STATE_INITIALIZING) + || (scic->parent.state_machine.current_state_id + == SCI_BASE_CONTROLLER_STATE_INITIALIZED) + ) { + u16 index; + + /* + * Validate the oem parameters. If they are not legal, then + * return a failure. */ + for (index = 0; index < SCI_MAX_PORTS; index++) { + if (scic_parms->sds1.ports[index].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) { + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + } + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if ( + scic_parms->sds1.phys[index].sas_address.high == 0 + && scic_parms->sds1.phys[index].sas_address.low == 0 + ) { + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + } + + memcpy(&scic->oem_parameters, scic_parms, sizeof(*scic_parms)); + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +/* --------------------------------------------------------------------------- */ + +void scic_oem_parameters_get( + struct scic_sds_controller *scic, + union scic_oem_parameters *scic_parms) +{ + memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); +} + +/* --------------------------------------------------------------------------- */ + + +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280 +#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000 +#define INTERRUPT_COALESCE_NUMBER_MAX 256 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 + +enum sci_status scic_controller_set_interrupt_coalescence( + struct scic_sds_controller *scic_controller, + u32 coalesce_number, + u32 coalesce_timeout) +{ + u8 timeout_encode = 0; + u32 min = 0; + u32 max = 0; + + /* Check if the input parameters fall in the range. */ + if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + /* + * Defined encoding for interrupt coalescing timeout: + * Value Min Max Units + * ----- --- --- ----- + * 0 - - Disabled + * 1 13.3 20.0 ns + * 2 26.7 40.0 + * 3 53.3 80.0 + * 4 106.7 160.0 + * 5 213.3 320.0 + * 6 426.7 640.0 + * 7 853.3 1280.0 + * 8 1.7 2.6 us + * 9 3.4 5.1 + * 10 6.8 10.2 + * 11 13.7 20.5 + * 12 27.3 41.0 + * 13 54.6 81.9 + * 14 109.2 163.8 + * 15 218.5 327.7 + * 16 436.9 655.4 + * 17 873.8 1310.7 + * 18 1.7 2.6 ms + * 19 3.5 5.2 + * 20 7.0 10.5 + * 21 14.0 21.0 + * 22 28.0 41.9 + * 23 55.9 83.9 + * 24 111.8 167.8 + * 25 223.7 335.5 + * 26 447.4 671.1 + * 27 894.8 1342.2 + * 28 1.8 2.7 s + * Others Undefined */ + + /* + * Use the table above to decide the encode of interrupt coalescing timeout + * value for register writing. */ + if (coalesce_timeout == 0) + timeout_encode = 0; + else{ + /* make the timeout value in unit of (10 ns). */ + coalesce_timeout = coalesce_timeout * 100; + min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10; + max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10; + + /* get the encode of timeout for register writing. */ + for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN; + timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX; + timeout_encode++) { + if (min <= coalesce_timeout && max > coalesce_timeout) + break; + else if (coalesce_timeout >= max && coalesce_timeout < min * 2 + && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) { + if ((coalesce_timeout - max) < (2 * min - coalesce_timeout)) + break; + else{ + timeout_encode++; + break; + } + } else { + max = max * 2; + min = min * 2; + } + } + + if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1) + /* the value is out of range. */ + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + SMU_ICC_WRITE( + scic_controller, + (SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | + SMU_ICC_GEN_VAL(TIMER, timeout_encode)) + ); + + scic_controller->interrupt_coalesce_number = (u16)coalesce_number; + scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100; + + return SCI_SUCCESS; +} + + +struct scic_sds_controller *scic_controller_alloc(struct device *dev) +{ + return devm_kzalloc(dev, sizeof(struct scic_sds_controller), GFP_KERNEL); +} + +/* + * ***************************************************************************** + * * DEFAULT STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which, if it was used, would + * be cast to a struct scic_sds_remote_device. + * @io_request: This is the struct sci_base_request which, if it was used, would be + * cast to a SCIC_SDS_IO_REQUEST. + * @io_tag: This is the IO tag to be assigned to the IO request or + * SCI_CONTROLLER_INVALID_IO_TAG. + * + * This method is called when the struct scic_sds_controller default start io/task + * handler is in place. - Issue a warning message enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_controller_default_start_operation_handler( + struct sci_base_controller *controller, + struct sci_base_remote_device *remote_device, + struct sci_base_request *io_request, + u16 io_tag) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller requested to start an io/task from " + "invalid state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + this_controller))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which, if it was used, would + * be cast to a struct scic_sds_remote_device. + * @io_request: This is the struct sci_base_request which, if it was used, would be + * cast to a SCIC_SDS_IO_REQUEST. + * + * This method is called when the struct scic_sds_controller default request handler + * is in place. - Issue a warning message enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_controller_default_request_handler( + struct sci_base_controller *controller, + struct sci_base_remote_device *remote_device, + struct sci_base_request *io_request) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller request operation from invalid state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + this_controller))); + + return SCI_FAILURE_INVALID_STATE; +} + +/* + * ***************************************************************************** + * * GENERAL (COMMON) STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @controller: The struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * + * This method is called when the struct scic_sds_controller is in the ready state + * reset handler is in place. - Transition to + * SCI_BASE_CONTROLLER_STATE_RESETTING enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_controller_general_reset_handler( + struct sci_base_controller *controller) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + /* + * The reset operation is not a graceful cleanup just perform the state + * transition. */ + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(this_controller), + SCI_BASE_CONTROLLER_STATE_RESETTING + ); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * RESET STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @controller: This is the struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * + * This method is the struct scic_sds_controller initialize handler for the reset + * state. - Currently this function does nothing enum sci_status SCI_FAILURE This + * function is not yet implemented and is a valid request from the reset state. + */ +static enum sci_status scic_sds_controller_reset_state_initialize_handler( + struct sci_base_controller *controller) +{ + u32 index; + enum sci_status result = SCI_SUCCESS; + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(this_controller), + SCI_BASE_CONTROLLER_STATE_INITIALIZING + ); + + this_controller->timeout_timer = scic_cb_timer_create( + this_controller, + (void (*)(void *))scic_sds_controller_timeout_handler, + (void (*)(void *))controller); + + scic_sds_controller_initialize_phy_startup(this_controller); + + scic_sds_controller_initialize_power_control(this_controller); + + /* + * There is nothing to do here for B0 since we do not have to + * program the AFE registers. + * / @todo The AFE settings are supposed to be correct for the B0 but + * / presently they seem to be wrong. */ + scic_sds_controller_afe_initialization(this_controller); + + if (SCI_SUCCESS == result) { + u32 status; + u32 terminate_loop; + + /* Take the hardware out of reset */ + SMU_SMUSRCR_WRITE(this_controller, 0x00000000); + + /* + * / @todo Provide meaningfull error code for hardware failure + * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ + result = SCI_FAILURE; + terminate_loop = 100; + + while (terminate_loop-- && (result != SCI_SUCCESS)) { + /* Loop until the hardware reports success */ + scic_cb_stall_execution(SCU_CONTEXT_RAM_INIT_STALL_TIME); + status = SMU_SMUCSR_READ(this_controller); + + if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) { + result = SCI_SUCCESS; + } + } + } + + if (result == SCI_SUCCESS) { + u32 max_supported_ports; + u32 max_supported_devices; + u32 max_supported_io_requests; + u32 device_context_capacity; + + /* + * Determine what are the actaul device capacities that the + * hardware will support */ + device_context_capacity = SMU_DCC_READ(this_controller); + + max_supported_ports = + smu_dcc_get_max_ports(device_context_capacity); + max_supported_devices = + smu_dcc_get_max_remote_node_context(device_context_capacity); + max_supported_io_requests = + smu_dcc_get_max_task_context(device_context_capacity); + + /* Make all PEs that are unassigned match up with the logical ports */ + for (index = 0; index < max_supported_ports; index++) { + scu_register_write( + this_controller, + this_controller->scu_registers->peg0.ptsg.protocol_engine[index], + index + ); + } + + /* Record the smaller of the two capacity values */ + this_controller->logical_port_entries = + min(max_supported_ports, this_controller->logical_port_entries); + + this_controller->task_context_entries = + min(max_supported_io_requests, this_controller->task_context_entries); + + this_controller->remote_node_entries = + min(max_supported_devices, this_controller->remote_node_entries); + + /* + * Now that we have the correct hardware reported minimum values + * build the MDL for the controller. Default to a performance + * configuration. */ + scic_controller_set_mode(this_controller, SCI_MODE_SPEED); + } + + /* Initialize hardware PCI Relaxed ordering in DMA engines */ + if (result == SCI_SUCCESS) { + u32 dma_configuration; + + /* Configure the payload DMA */ + dma_configuration = SCU_PDMACR_READ(this_controller); + dma_configuration |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + SCU_PDMACR_WRITE(this_controller, dma_configuration); + + /* Configure the control DMA */ + dma_configuration = SCU_CDMACR_READ(this_controller); + dma_configuration |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + SCU_CDMACR_WRITE(this_controller, dma_configuration); + } + + /* + * Initialize the PHYs before the PORTs because the PHY registers + * are accessed during the port initialization. */ + if (result == SCI_SUCCESS) { + /* Initialize the phys */ + for (index = 0; + (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS); + index++) { + result = scic_sds_phy_initialize( + &this_controller->phy_table[index], + &this_controller->scu_registers->peg0.pe[index].ll + ); + } + } + + if (result == SCI_SUCCESS) { + /* Initialize the logical ports */ + for (index = 0; + (index < this_controller->logical_port_entries) + && (result == SCI_SUCCESS); + index++) { + result = scic_sds_port_initialize( + &this_controller->port_table[index], + &this_controller->scu_registers->peg0.pe[index].tl, + &this_controller->scu_registers->peg0.ptsg.port[index], + &this_controller->scu_registers->peg0.ptsg.protocol_engine, + &this_controller->scu_registers->peg0.viit[index] + ); + } + } + + if (SCI_SUCCESS == result) { + result = scic_sds_port_configuration_agent_initialize( + this_controller, + &this_controller->port_agent + ); + } + + /* Advance the controller state machine */ + if (result == SCI_SUCCESS) { + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(this_controller), + SCI_BASE_CONTROLLER_STATE_INITIALIZED + ); + } else { + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(this_controller), + SCI_BASE_CONTROLLER_STATE_FAILED + ); + } + + return result; +} + +/* + * ***************************************************************************** + * * INITIALIZED STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @controller: This is the struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @timeout: This is the allowed time for the controller object to reach the + * started state. + * + * This method is the struct scic_sds_controller start handler for the initialized + * state. - Validate we have a good memory descriptor table - Initialze the + * physical memory before programming the hardware - Program the SCU hardware + * with the physical memory addresses passed in the memory descriptor table. - + * Initialzie the TCi pool - Initialize the RNi pool - Initialize the + * completion queue - Initialize the unsolicited frame data - Take the SCU port + * task scheduler out of reset - Start the first phy object. - Transition to + * SCI_BASE_CONTROLLER_STATE_STARTING. enum sci_status SCI_SUCCESS if all of the + * controller start operations complete + * SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD if one or more of the memory + * descriptor fields is invalid. + */ +static enum sci_status scic_sds_controller_initialized_state_start_handler( + struct sci_base_controller *controller, + u32 timeout) +{ + u16 index; + enum sci_status result; + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + /* Make sure that the SCI User filled in the memory descriptor table correctly */ + result = scic_sds_controller_validate_memory_descriptor_table(this_controller); + + if (result == SCI_SUCCESS) { + /* The memory descriptor list looks good so program the hardware */ + scic_sds_controller_ram_initialization(this_controller); + } + + if (SCI_SUCCESS == result) { + /* Build the TCi free pool */ + sci_pool_initialize(this_controller->tci_pool); + for (index = 0; index < this_controller->task_context_entries; index++) { + sci_pool_put(this_controller->tci_pool, index); + } + + /* Build the RNi free pool */ + scic_sds_remote_node_table_initialize( + &this_controller->available_remote_nodes, + this_controller->remote_node_entries + ); + } + + if (SCI_SUCCESS == result) { + /* + * Before anything else lets make sure we will not be interrupted + * by the hardware. */ + scic_controller_disable_interrupts(this_controller); + + /* Enable the port task scheduler */ + scic_sds_controller_enable_port_task_scheduler(this_controller); + + /* Assign all the task entries to this controller physical function */ + scic_sds_controller_assign_task_entries(this_controller); + + /* Now initialze the completion queue */ + scic_sds_controller_initialize_completion_queue(this_controller); + + /* Initialize the unsolicited frame queue for use */ + scic_sds_controller_initialize_unsolicited_frame_queue(this_controller); + } + + if (SCI_SUCCESS == result) { + scic_sds_controller_start_next_phy(this_controller); + + scic_cb_timer_start(this_controller, + this_controller->timeout_timer, + timeout); + + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(this_controller), + SCI_BASE_CONTROLLER_STATE_STARTING + ); + } + + return result; +} + +/* + * ***************************************************************************** + * * INITIALIZED STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @controller: This is struct scic_sds_controller which receives the link up + * notification. + * @port: This is struct scic_sds_port with which the phy is associated. + * @phy: This is the struct scic_sds_phy which has gone link up. + * + * This method is called when the struct scic_sds_controller is in the starting state + * link up handler is called. This method will perform the following: - Stop + * the phy timer - Start the next phy - Report the link up condition to the + * port object none + */ +static void scic_sds_controller_starting_state_link_up_handler( + struct scic_sds_controller *this_controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + scic_sds_controller_phy_timer_stop(this_controller); + + this_controller->port_agent.link_up_handler( + this_controller, &this_controller->port_agent, port, phy + ); + /* scic_sds_port_link_up(port, phy); */ + + scic_sds_controller_start_next_phy(this_controller); +} + +/** + * + * @controller: This is struct scic_sds_controller which receives the link down + * notification. + * @port: This is struct scic_sds_port with which the phy is associated. + * @phy: This is the struct scic_sds_phy which has gone link down. + * + * This method is called when the struct scic_sds_controller is in the starting state + * link down handler is called. - Report the link down condition to the port + * object none + */ +static void scic_sds_controller_starting_state_link_down_handler( + struct scic_sds_controller *this_controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + this_controller->port_agent.link_down_handler( + this_controller, &this_controller->port_agent, port, phy + ); + /* scic_sds_port_link_down(port, phy); */ +} + +/* + * ***************************************************************************** + * * READY STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @controller: The struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @timeout: The timeout for when the stop operation should report a failure. + * + * This method is called when the struct scic_sds_controller is in the ready state + * stop handler is called. - Start the timeout timer - Transition to + * SCI_BASE_CONTROLLER_STATE_STOPPING. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_controller_ready_state_stop_handler( + struct sci_base_controller *controller, + u32 timeout) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + scic_cb_timer_start(this_controller, + this_controller->timeout_timer, + timeout); + + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(this_controller), + SCI_BASE_CONTROLLER_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device object. + * @io_request: This is the struct sci_base_request which is cast to a + * SCIC_SDS_IO_REQUEST object. + * @io_tag: This is the IO tag to be assigned to the IO request or + * SCI_CONTROLLER_INVALID_IO_TAG. + * + * This method is called when the struct scic_sds_controller is in the ready state and + * the start io handler is called. - Start the io request on the remote device + * - if successful - assign the io_request to the io_request_table - post the + * request to the hardware enum sci_status SCI_SUCCESS if the start io operation + * succeeds SCI_FAILURE_INSUFFICIENT_RESOURCES if the IO tag could not be + * allocated for the io request. SCI_FAILURE_INVALID_STATE if one or more + * objects are not in a valid state to accept io requests. How does the io_tag + * parameter get assigned to the io request? + */ +static enum sci_status scic_sds_controller_ready_state_start_io_handler( + struct sci_base_controller *controller, + struct sci_base_remote_device *remote_device, + struct sci_base_request *io_request, + u16 io_tag) +{ + enum sci_status status; + + struct scic_sds_controller *this_controller; + struct scic_sds_request *the_request; + struct scic_sds_remote_device *the_device; + + this_controller = (struct scic_sds_controller *)controller; + the_request = (struct scic_sds_request *)io_request; + the_device = (struct scic_sds_remote_device *)remote_device; + + status = scic_sds_remote_device_start_io(this_controller, the_device, the_request); + + if (status == SCI_SUCCESS) { + this_controller->io_request_table[ + scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + + scic_sds_controller_post_request( + this_controller, + scic_sds_request_get_post_context(the_request) + ); + } + + return status; +} + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device object. + * @io_request: This is the struct sci_base_request which is cast to a + * SCIC_SDS_IO_REQUEST object. + * + * This method is called when the struct scic_sds_controller is in the ready state and + * the complete io handler is called. - Complete the io request on the remote + * device - if successful - remove the io_request to the io_request_table + * enum sci_status SCI_SUCCESS if the start io operation succeeds + * SCI_FAILURE_INVALID_STATE if one or more objects are not in a valid state to + * accept io requests. + */ +static enum sci_status scic_sds_controller_ready_state_complete_io_handler( + struct sci_base_controller *controller, + struct sci_base_remote_device *remote_device, + struct sci_base_request *io_request) +{ + u16 index; + enum sci_status status; + struct scic_sds_controller *this_controller; + struct scic_sds_request *the_request; + struct scic_sds_remote_device *the_device; + + this_controller = (struct scic_sds_controller *)controller; + the_request = (struct scic_sds_request *)io_request; + the_device = (struct scic_sds_remote_device *)remote_device; + + status = scic_sds_remote_device_complete_io( + this_controller, the_device, the_request); + + if (status == SCI_SUCCESS) { + index = scic_sds_io_tag_get_index(the_request->io_tag); + this_controller->io_request_table[index] = SCI_INVALID_HANDLE; + } + + return status; +} + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device object. + * @io_request: This is the struct sci_base_request which is cast to a + * SCIC_SDS_IO_REQUEST object. + * + * This method is called when the struct scic_sds_controller is in the ready state and + * the continue io handler is called. enum sci_status + */ +static enum sci_status scic_sds_controller_ready_state_continue_io_handler( + struct sci_base_controller *controller, + struct sci_base_remote_device *remote_device, + struct sci_base_request *io_request) +{ + struct scic_sds_controller *this_controller; + struct scic_sds_request *the_request; + + the_request = (struct scic_sds_request *)io_request; + this_controller = (struct scic_sds_controller *)controller; + + this_controller->io_request_table[ + scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + + scic_sds_controller_post_request( + this_controller, + scic_sds_request_get_post_context(the_request) + ); + + return SCI_SUCCESS; +} + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device object. + * @io_request: This is the struct sci_base_request which is cast to a + * SCIC_SDS_IO_REQUEST object. + * @task_tag: This is the task tag to be assigned to the task request or + * SCI_CONTROLLER_INVALID_IO_TAG. + * + * This method is called when the struct scic_sds_controller is in the ready state and + * the start task handler is called. - The remote device is requested to start + * the task request - if successful - assign the task to the io_request_table - + * post the request to the SCU hardware enum sci_status SCI_SUCCESS if the start io + * operation succeeds SCI_FAILURE_INSUFFICIENT_RESOURCES if the IO tag could + * not be allocated for the io request. SCI_FAILURE_INVALID_STATE if one or + * more objects are not in a valid state to accept io requests. How does the io + * tag get assigned in this code path? + */ +static enum sci_status scic_sds_controller_ready_state_start_task_handler( + struct sci_base_controller *controller, + struct sci_base_remote_device *remote_device, + struct sci_base_request *io_request, + u16 task_tag) +{ + struct scic_sds_controller *this_controller = (struct scic_sds_controller *) + controller; + struct scic_sds_request *the_request = (struct scic_sds_request *) + io_request; + struct scic_sds_remote_device *the_device = (struct scic_sds_remote_device *) + remote_device; + enum sci_status status; + + status = scic_sds_remote_device_start_task( + this_controller, the_device, the_request + ); + + if (status == SCI_SUCCESS) { + this_controller->io_request_table[ + scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + + scic_sds_controller_post_request( + this_controller, + scic_sds_request_get_post_context(the_request) + ); + } else if (status == SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS) { + this_controller->io_request_table[ + scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + + /* + * We will let framework know this task request started successfully, + * although core is still woring on starting the request (to post tc when + * RNC is resumed.) */ + status = SCI_SUCCESS; + } + return status; +} + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device object. + * @io_request: This is the struct sci_base_request which is cast to a + * SCIC_SDS_IO_REQUEST object. + * + * This method is called when the struct scic_sds_controller is in the ready state and + * the terminate request handler is called. - call the io request terminate + * function - if successful - post the terminate request to the SCU hardware + * enum sci_status SCI_SUCCESS if the start io operation succeeds + * SCI_FAILURE_INVALID_STATE if one or more objects are not in a valid state to + * accept io requests. + */ +static enum sci_status scic_sds_controller_ready_state_terminate_request_handler( + struct sci_base_controller *controller, + struct sci_base_remote_device *remote_device, + struct sci_base_request *io_request) +{ + struct scic_sds_controller *this_controller = (struct scic_sds_controller *) + controller; + struct scic_sds_request *the_request = (struct scic_sds_request *) + io_request; + enum sci_status status; + + status = scic_sds_io_request_terminate(the_request); + if (status == SCI_SUCCESS) { + /* + * Utilize the original post context command and or in the POST_TC_ABORT + * request sub-type. */ + scic_sds_controller_post_request( + this_controller, + scic_sds_request_get_post_context(the_request) + | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT + ); + } + + return status; +} + +/** + * + * @controller: This is struct scic_sds_controller which receives the link up + * notification. + * @port: This is struct scic_sds_port with which the phy is associated. + * @phy: This is the struct scic_sds_phy which has gone link up. + * + * This method is called when the struct scic_sds_controller is in the starting state + * link up handler is called. This method will perform the following: - Stop + * the phy timer - Start the next phy - Report the link up condition to the + * port object none + */ +static void scic_sds_controller_ready_state_link_up_handler( + struct scic_sds_controller *this_controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + this_controller->port_agent.link_up_handler( + this_controller, &this_controller->port_agent, port, phy + ); +} + +/** + * + * @controller: This is struct scic_sds_controller which receives the link down + * notification. + * @port: This is struct scic_sds_port with which the phy is associated. + * @phy: This is the struct scic_sds_phy which has gone link down. + * + * This method is called when the struct scic_sds_controller is in the starting state + * link down handler is called. - Report the link down condition to the port + * object none + */ +static void scic_sds_controller_ready_state_link_down_handler( + struct scic_sds_controller *this_controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + this_controller->port_agent.link_down_handler( + this_controller, &this_controller->port_agent, port, phy + ); +} + +/* + * ***************************************************************************** + * * STOPPING STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device object. + * @io_request: This is the struct sci_base_request which is cast to a + * SCIC_SDS_IO_REQUEST object. + * + * This method is called when the struct scic_sds_controller is in a stopping state + * and the complete io handler is called. - This function is not yet + * implemented enum sci_status SCI_FAILURE + */ +static enum sci_status scic_sds_controller_stopping_state_complete_io_handler( + struct sci_base_controller *controller, + struct sci_base_remote_device *remote_device, + struct sci_base_request *io_request) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)controller; + + /* / @todo Implement this function */ + return SCI_FAILURE; +} + +/** + * + * @controller: This is struct sci_base_controller object which is cast into a + * struct scic_sds_controller object. + * @remote_device: This is struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device object. + * @io_request: This is the struct sci_base_request which is cast to a + * SCIC_SDS_IO_REQUEST object. + * + * This method is called when the struct scic_sds_controller is in a stopping state + * and the complete task handler is called. - This function is not yet + * implemented enum sci_status SCI_FAILURE + */ + +/* + * ***************************************************************************** + * * STOPPED STATE HANDLERS + * ***************************************************************************** */ + +/* + * ***************************************************************************** + * * FAILED STATE HANDLERS + * ***************************************************************************** */ + +const struct scic_sds_controller_state_handler scic_sds_controller_state_handler_table[] = { + [SCI_BASE_CONTROLLER_STATE_INITIAL] = { + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_default_request_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + }, + [SCI_BASE_CONTROLLER_STATE_RESET] = { + .base.initialize = scic_sds_controller_reset_state_initialize_handler, + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_default_request_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + }, + [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = { + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_default_request_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + }, + [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = { + .base.start = scic_sds_controller_initialized_state_start_handler, + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_default_request_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + }, + [SCI_BASE_CONTROLLER_STATE_STARTING] = { + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_default_request_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + .link_up = scic_sds_controller_starting_state_link_up_handler, + .link_down = scic_sds_controller_starting_state_link_down_handler + }, + [SCI_BASE_CONTROLLER_STATE_READY] = { + .base.stop = scic_sds_controller_ready_state_stop_handler, + .base.reset = scic_sds_controller_general_reset_handler, + .base.start_io = scic_sds_controller_ready_state_start_io_handler, + .base.complete_io = scic_sds_controller_ready_state_complete_io_handler, + .base.continue_io = scic_sds_controller_ready_state_continue_io_handler, + .base.start_task = scic_sds_controller_ready_state_start_task_handler, + .base.complete_task = scic_sds_controller_ready_state_complete_io_handler, + .terminate_request = scic_sds_controller_ready_state_terminate_request_handler, + .link_up = scic_sds_controller_ready_state_link_up_handler, + .link_down = scic_sds_controller_ready_state_link_down_handler + }, + [SCI_BASE_CONTROLLER_STATE_RESETTING] = { + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_default_request_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + }, + [SCI_BASE_CONTROLLER_STATE_STOPPING] = { + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_stopping_state_complete_io_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + }, + [SCI_BASE_CONTROLLER_STATE_STOPPED] = { + .base.reset = scic_sds_controller_general_reset_handler, + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_default_request_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + }, + [SCI_BASE_CONTROLLER_STATE_FAILED] = { + .base.reset = scic_sds_controller_general_reset_handler, + .base.start_io = scic_sds_controller_default_start_operation_handler, + .base.complete_io = scic_sds_controller_default_request_handler, + .base.continue_io = scic_sds_controller_default_request_handler, + .terminate_request = scic_sds_controller_default_request_handler, + }, +}; + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * object. + * + * This method implements the actions taken by the struct scic_sds_controller on entry + * to the SCI_BASE_CONTROLLER_STATE_INITIAL. - Set the state handlers to the + * controllers initial state. none This function should initialze the + * controller object. + */ +static void scic_sds_controller_initial_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)object; + + sci_base_state_machine_change_state( + &this_controller->parent.state_machine, SCI_BASE_CONTROLLER_STATE_RESET); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * object. + * + * This method implements the actions taken by the struct scic_sds_controller on exit + * from the SCI_BASE_CONTROLLER_STATE_STARTING. - This function stops the + * controller starting timeout timer. none + */ +static void scic_sds_controller_starting_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_controller *scic = (struct scic_sds_controller *)object; + + scic_cb_timer_stop(scic, scic->timeout_timer); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * object. + * + * This method implements the actions taken by the struct scic_sds_controller on entry + * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the + * controllers ready state. none + */ +static void scic_sds_controller_ready_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)object; + + /* set the default interrupt coalescence number and timeout value. */ + scic_controller_set_interrupt_coalescence( + this_controller, 0x10, 250); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * object. + * + * This method implements the actions taken by the struct scic_sds_controller on exit + * from the SCI_BASE_CONTROLLER_STATE_READY. - This function does nothing. none + */ +static void scic_sds_controller_ready_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)object; + + /* disable interrupt coalescence. */ + scic_controller_set_interrupt_coalescence(this_controller, 0, 0); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * object. + * + * This method implements the actions taken by the struct scic_sds_controller on entry + * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the + * controllers ready state. - Stop the phys on this controller - Stop the ports + * on this controller - Stop all of the remote devices on this controller none + */ +static void scic_sds_controller_stopping_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)object; + + /* Stop all of the components for this controller */ + scic_sds_controller_stop_phys(this_controller); + scic_sds_controller_stop_ports(this_controller); + scic_sds_controller_stop_devices(this_controller); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * object. + * + * This method implements the actions taken by the struct scic_sds_controller on exit + * from the SCI_BASE_CONTROLLER_STATE_STOPPING. - This function stops the + * controller stopping timeout timer. none + */ +static void scic_sds_controller_stopping_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)object; + + scic_cb_timer_stop(this_controller, this_controller->timeout_timer); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * object. + * + * This method implements the actions taken by the struct scic_sds_controller on entry + * to the SCI_BASE_CONTROLLER_STATE_RESETTING. - Set the state handlers to the + * controllers resetting state. - Write to the SCU hardware reset register to + * force a reset - Transition to the SCI_BASE_CONTROLLER_STATE_RESET none + */ +static void scic_sds_controller_resetting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_controller *this_controller; + + this_controller = (struct scic_sds_controller *)object; + + scic_sds_controller_reset_hardware(this_controller); + + sci_base_state_machine_change_state( + scic_sds_controller_get_base_state_machine(this_controller), + SCI_BASE_CONTROLLER_STATE_RESET + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_controller_state_table[] = { + [SCI_BASE_CONTROLLER_STATE_INITIAL] = { + .enter_state = scic_sds_controller_initial_state_enter, + }, + [SCI_BASE_CONTROLLER_STATE_RESET] = {}, + [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {}, + [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {}, + [SCI_BASE_CONTROLLER_STATE_STARTING] = { + .exit_state = scic_sds_controller_starting_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_READY] = { + .enter_state = scic_sds_controller_ready_state_enter, + .exit_state = scic_sds_controller_ready_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_RESETTING] = { + .enter_state = scic_sds_controller_resetting_state_enter, + }, + [SCI_BASE_CONTROLLER_STATE_STOPPING] = { + .enter_state = scic_sds_controller_stopping_state_enter, + .exit_state = scic_sds_controller_stopping_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_STOPPED] = {}, + [SCI_BASE_CONTROLLER_STATE_FAILED] = {} +}; + diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h new file mode 100644 index 0000000..afa45f9 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -0,0 +1,706 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_CONTROLLER_H_ +#define _SCIC_SDS_CONTROLLER_H_ + +/** + * This file contains the structures, constants and prototypes used for the + * core controller object. + * + * + */ + +#include "sci_pool.h" +#include "sci_controller_constants.h" +#include "sci_memory_descriptor_list.h" +#include "sci_base_controller.h" +#include "scic_config_parameters.h" +#include "scic_sds_port.h" +#include "scic_sds_phy.h" +#include "scic_sds_remote_node_table.h" +#include "scu_registers.h" +#include "scu_constants.h" +#include "scu_remote_node_context.h" +#include "scu_task_context.h" +#include "scu_unsolicited_frame.h" +#include "scic_sds_unsolicited_frame_control.h" +#include "scic_sds_port_configuration_agent.h" +#include "scic_sds_pci.h" + +struct scic_sds_remote_device; +struct scic_sds_request; +struct scic_sds_controller; + + +#define SCU_COMPLETION_RAM_ALIGNMENT (64) + +/** + * enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS - + * + * This enumeration depects the types of MDEs that are going to be created for + * the controller object. + */ +enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS { + /** + * Completion queue MDE entry + */ + SCU_MDE_COMPLETION_QUEUE, + + /** + * Remote node context MDE entry + */ + SCU_MDE_REMOTE_NODE_CONTEXT, + + /** + * Task context MDE entry + */ + SCU_MDE_TASK_CONTEXT, + + /** + * Unsolicited frame buffer MDE entrys this is the start of the unsolicited + * frame buffer entries. + */ + SCU_MDE_UF_BUFFER, + + SCU_MAX_MDES +}; + +/** + * + * + * Allowed PORT configuration modes APC Automatic PORT configuration mode is + * defined by the OEM configuration parameters providing no PHY_MASK parameters + * for any PORT. i.e. There are no phys assigned to any of the ports at start. + * MPC Manual PORT configuration mode is defined by the OEM configuration + * parameters providing a PHY_MASK value for any PORT. It is assumed that any + * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned. + * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs + * being assigned is sufficient to declare manual PORT configuration. + */ +enum SCIC_PORT_CONFIGURATION_MODE { + SCIC_PORT_MANUAL_CONFIGURATION_MODE, + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE +}; + +/** + * struct scic_power_control - + * + * This structure defines the fields for managing power control for direct + * attached disk devices. + */ +struct scic_power_control { + /** + * This field is set when the power control timer is running and cleared when + * it is not. + */ + bool timer_started; + + /** + * This field is the handle to the driver timer object. This timer is used to + * control when the directed attached disks can consume power. + */ + void *timer; + + /** + * This field is used to keep track of how many phys are put into the + * requesters field. + */ + u8 phys_waiting; + + /** + * This field is an array of phys that we are waiting on. The phys are direct + * mapped into requesters via struct scic_sds_phy.phy_index + */ + struct scic_sds_phy *requesters[SCI_MAX_PHYS]; + +}; + +/** + * struct scic_sds_controller - + * + * This structure represents the SCU contoller object. + */ +struct scic_sds_controller { + /** + * The struct sci_base_controller is the parent object for the struct scic_sds_controller + * object. + */ + struct sci_base_controller parent; + + /** + * This field is the driver timer object handler used to time the controller + * object start and stop requests. + */ + void *timeout_timer; + + /** + * This field contains the user parameters to be utilized for this + * core controller object. + */ + union scic_user_parameters user_parameters; + + /** + * This field contains the OEM parameters to be utilized for this + * core controller object. + */ + union scic_oem_parameters oem_parameters; + + /** + * This field contains the port configuration agent for this controller. + */ + struct scic_sds_port_configuration_agent port_agent; + + /** + * This field is the array of port objects that are controlled by this + * controller object. There is one dummy port object also contained within + * this controller object. + */ + struct scic_sds_port port_table[SCI_MAX_PORTS + 1]; + + /** + * This field is the array of phy objects that are controlled by this + * controller object. + */ + struct scic_sds_phy phy_table[SCI_MAX_PHYS]; + + /** + * This field is the array of device objects that are currently constructed + * for this controller object. This table is used as a fast lookup of device + * objects that need to handle device completion notifications from the + * hardware. The table is RNi based. + */ + struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; + + /** + * This field is the array of IO request objects that are currently active for + * this controller object. This table is used as a fast lookup of the io + * request object that need to handle completion queue notifications. The + * table is TCi based. + */ + struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS]; + + /** + * This field is the free RNi data structure + */ + struct scic_remote_node_table available_remote_nodes; + + /** + * This field is the TCi pool used to manage the task context index. + */ + SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS); + + /** + * This filed is the struct scic_power_control data used to controll when direct + * attached devices can consume power. + */ + struct scic_power_control power_control; + + /** + * This field is the array of sequence values for the IO Tag fields. Even + * though only 4 bits of the field is used for the sequence the sequence is 16 + * bits in size so the sequence can be bitwise or'd with the TCi to build the + * IO Tag value. + */ + u16 io_request_sequence[SCI_MAX_IO_REQUESTS]; + + /** + * This field in the array of sequence values for the RNi. These are used + * to control io request build to io request start operations. The sequence + * value is recorded into an io request when it is built and is checked on + * the io request start operation to make sure that there was not a device + * hot plug between the build and start operation. + */ + u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES]; + + /** + * This field is a pointer to the memory allocated by the driver for the task + * context table. This data is shared between the hardware and software. + */ + struct scu_task_context *task_context_table; + + /** + * This field is a pointer to the memory allocated by the driver for the + * remote node context table. This table is shared between the hardware and + * software. + */ + union scu_remote_node_context *remote_node_context_table; + + /** + * This field is the array of physical memory requiremets for this controller + * object. + */ + struct sci_physical_memory_descriptor memory_descriptors[SCU_MAX_MDES]; + + /** + * This field is a pointer to the completion queue. This memory is + * written to by the hardware and read by the software. + */ + u32 *completion_queue; + + /** + * This field is the software copy of the completion queue get pointer. The + * controller object writes this value to the hardware after processing the + * completion entries. + */ + u32 completion_queue_get; + + /** + * This field is the minimum of the number of hardware supported port entries + * and the software requested port entries. + */ + u32 logical_port_entries; + + /** + * This field is the minimum number of hardware supported completion queue + * entries and the software requested completion queue entries. + */ + u32 completion_queue_entries; + + /** + * This field is the minimum number of hardware supported event entries and + * the software requested event entries. + */ + u32 completion_event_entries; + + /** + * This field is the minimum number of devices supported by the hardware and + * the number of devices requested by the software. + */ + u32 remote_node_entries; + + /** + * This field is the minimum number of IO requests supported by the hardware + * and the number of IO requests requested by the software. + */ + u32 task_context_entries; + + /** + * This object contains all of the unsolicited frame specific + * data utilized by the core controller. + */ + struct scic_sds_unsolicited_frame_control uf_control; + + /** + * This field records the fact that the controller has encountered a fatal + * error and must be reset. + */ + bool encountered_fatal_error; + + /** + * This field specifies that the controller should ignore + * completion processing for non-fastpath events. This will + * cause the completions to be thrown away. + */ + bool restrict_completions; + + /* Phy Startup Data */ + /** + * This field is the driver timer handle for controller phy request startup. + * On controller start the controller will start each PHY individually in + * order of phy index. + */ + void *phy_startup_timer; + + /** + * This field is set when the phy_startup_timer is running and is cleared when + * the phy_startup_timer is stopped. + */ + bool phy_startup_timer_pending; + + /** + * This field is the index of the next phy start. It is initialized to 0 and + * increments for each phy index that is started. + */ + u32 next_phy_to_start; + + /** + * This field controlls the invalid link up notifications to the SCI_USER. If + * an invalid_link_up notification is reported a bit for the PHY index is set + * so further notifications are not made. Once the PHY object reports link up + * and is made part of a port then this bit for the PHY index is cleared. + */ + u8 invalid_phy_mask; + + /* + * This field saves the current interrupt coalescing number of the controller. + */ + u16 interrupt_coalesce_number; + + /* + * This field saves the current interrupt coalescing timeout value in microseconds. + */ + u32 interrupt_coalesce_timeout; + + /** + * This field is a pointer to the memory mapped register space for the + * struct smu_registers. + */ + struct smu_registers __iomem *smu_registers; + + /** + * This field is a pointer to the memory mapped register space for the + * struct scu_registers. + */ + struct scu_registers __iomem *scu_registers; + +}; + +typedef void (*scic_sds_controller_phy_handler_t)(struct scic_sds_controller *, + struct scic_sds_port *, + struct scic_sds_phy *); +/** + * struct scic_sds_controller_state_handler - + * + * This structure contains the SDS core specific definition for the state + * handlers. + */ +struct scic_sds_controller_state_handler { + struct sci_base_controller_state_handler base; + + sci_base_controller_request_handler_t terminate_request; + scic_sds_controller_phy_handler_t link_up; + scic_sds_controller_phy_handler_t link_down; +}; + +extern const struct scic_sds_controller_state_handler + scic_sds_controller_state_handler_table[]; +extern const struct sci_base_state scic_sds_controller_state_table[]; + +/** + * INCREMENT_QUEUE_GET() - + * + * This macro will increment the specified index to and if the index wraps to 0 + * it will toggel the cycle bit. + */ +#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \ + { \ + if ((index) + 1 == entry_count) { \ + (index) = 0; \ + (cycle) = (cycle) ^ (bit_toggle); \ + } else { \ + index = index + 1; \ + } \ + } + +/** + * scic_sds_controller_get_base_state_machine() - + * + * This is a helper macro that gets the base state machine for the controller + * object + */ +#define scic_sds_controller_get_base_state_machine(this_controller) \ + (&(this_controller)->parent.state_machine) + +/** + * scic_sds_controller_get_port_configuration_agent() - + * + * This is a helper macro to get the port configuration agent from the + * controller object. + */ +#define scic_sds_controller_get_port_configuration_agent(controller) \ + (&(controller)->port_agent) + +/** + * smu_register_write() - + * + * This macro writes to the smu_register for this controller + */ +#define smu_register_write(controller, reg, value) \ + scic_sds_pci_write_smu_dword((controller), &(reg), (value)) + +/** + * smu_register_read() - + * + * This macro reads the smu_register for this controller + */ +#define smu_register_read(controller, reg) \ + scic_sds_pci_read_smu_dword((controller), &(reg)) + +/** + * scu_register_write() - + * + * This mcaro writes the scu_register for this controller + */ +#define scu_register_write(controller, reg, value) \ + scic_sds_pci_write_scu_dword((controller), &(reg), (value)) + +/** + * scu_register_read() - + * + * This macro reads the scu_register for this controller + */ +#define scu_register_read(controller, reg) \ + scic_sds_pci_read_scu_dword((controller), &(reg)) + +/** + * scic_sds_controller_get_protocol_engine_group() - + * + * This macro returns the protocol engine group for this controller object. + * Presently we only support protocol engine group 0 so just return that + */ +#define scic_sds_controller_get_protocol_engine_group(controller) 0 + +/** + * scic_sds_io_tag_construct() - + * + * This macro constructs an IO tag from the sequence and index values. + */ +#define scic_sds_io_tag_construct(sequence, task_index) \ + ((sequence) << 12 | (task_index)) + +/** + * scic_sds_io_tag_get_sequence() - + * + * This macro returns the IO sequence from the IO tag value. + */ +#define scic_sds_io_tag_get_sequence(io_tag) \ + (((io_tag) & 0xF000) >> 12) + +/** + * scic_sds_io_tag_get_index() - + * + * This macro returns the TCi from the io tag value + */ +#define scic_sds_io_tag_get_index(io_tag) \ + ((io_tag) & 0x0FFF) + +/** + * scic_sds_io_sequence_increment() - + * + * This is a helper macro to increment the io sequence count. We may find in + * the future that it will be faster to store the sequence count in such a way + * as we dont perform the shift operation to build io tag values so therefore + * need a way to incrment them correctly + */ +#define scic_sds_io_sequence_increment(value) \ + ((value) = (((value) + 1) & 0x000F)) + +#define scic_sds_remote_device_node_count(device) \ + (\ + (\ + (device)->target_protocols.u.bits.attached_stp_target \ + && ((device)->is_direct_attached != true) \ + ) \ + ? SCU_STP_REMOTE_NODE_COUNT : SCU_SSP_REMOTE_NODE_COUNT \ + ) + +/** + * scic_sds_controller_set_invalid_phy() - + * + * This macro will set the bit in the invalid phy mask for this controller + * object. This is used to control messages reported for invalid link up + * notifications. + */ +#define scic_sds_controller_set_invalid_phy(controller, phy) \ + ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index)) + +/** + * scic_sds_controller_clear_invalid_phy() - + * + * This macro will clear the bit in the invalid phy mask for this controller + * object. This is used to control messages reported for invalid link up + * notifications. + */ +#define scic_sds_controller_clear_invalid_phy(controller, phy) \ + ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) + +/* --------------------------------------------------------------------------- */ + +u32 scic_sds_controller_get_object_size(void); + +/* --------------------------------------------------------------------------- */ + + +/* --------------------------------------------------------------------------- */ + +enum SCIC_PORT_CONFIGURATION_MODE scic_sds_controller_get_port_configuration_mode( + struct scic_sds_controller *this_controller); + +/* --------------------------------------------------------------------------- */ + +void scic_sds_controller_post_request( + struct scic_sds_controller *this_controller, + u32 request); + +/* --------------------------------------------------------------------------- */ + +void scic_sds_controller_release_frame( + struct scic_sds_controller *this_controller, + u32 frame_index); + +void scic_sds_controller_copy_sata_response( + void *response_buffer, + void *frame_header, + void *frame_buffer); + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_sds_controller_allocate_remote_node_context( + struct scic_sds_controller *this_controller, + struct scic_sds_remote_device *the_device, + u16 *node_id); + +void scic_sds_controller_free_remote_node_context( + struct scic_sds_controller *this_controller, + struct scic_sds_remote_device *the_device, + u16 node_id); + +union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( + struct scic_sds_controller *this_controller, + u16 node_id); + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( + struct scic_sds_controller *this_controller, + u16 io_tag); + + +struct scu_task_context *scic_sds_controller_get_task_context_buffer( + struct scic_sds_controller *this_controller, + u16 io_tag); + +/* + * ***************************************************************************** + * * CORE CONTROLLER POWER CONTROL METHODS + * ***************************************************************************** */ + + +void scic_sds_controller_power_control_queue_insert( + struct scic_sds_controller *this_controller, + struct scic_sds_phy *the_phy); + +void scic_sds_controller_power_control_queue_remove( + struct scic_sds_controller *this_controller, + struct scic_sds_phy *the_phy); + +/* + * ***************************************************************************** + * * CORE CONTROLLER PHY MESSAGE PROCESSING + * ***************************************************************************** */ + +void scic_sds_controller_link_up( + struct scic_sds_controller *this_controller, + struct scic_sds_port *the_port, + struct scic_sds_phy *the_phy); + +void scic_sds_controller_link_down( + struct scic_sds_controller *this_controller, + struct scic_sds_port *the_port, + struct scic_sds_phy *the_phy); + +/* + * ***************************************************************************** + * * CORE CONTROLLER PRIVATE METHODS + * ***************************************************************************** */ + +enum sci_status scic_sds_controller_validate_memory_descriptor_table( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_ram_initialization( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_assign_task_entries( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_afe_initialization( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_enable_port_task_scheduler( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_initialize_completion_queue( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_initialize_unsolicited_frame_queue( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_phy_timer_stop( + struct scic_sds_controller *this_controller); + +enum sci_status scic_sds_controller_start_next_phy( + struct scic_sds_controller *this_controller); + +enum sci_status scic_sds_controller_stop_phys( + struct scic_sds_controller *this_controller); + +enum sci_status scic_sds_controller_stop_ports( + struct scic_sds_controller *this_controller); + +enum sci_status scic_sds_controller_stop_devices( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_copy_task_context( + struct scic_sds_controller *this_controller, + struct scic_sds_request *this_request); + +void scic_sds_controller_timeout_handler( + struct scic_sds_controller *controller); + +void scic_sds_controller_initialize_power_control( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_register_setup( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_reset_hardware( + struct scic_sds_controller *this_controller); + + +void scic_sds_controller_initialize_phy_startup( + struct scic_sds_controller *this_controller); + +#endif /* _SCIC_SDS_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller_registers.h b/drivers/scsi/isci/core/scic_sds_controller_registers.h new file mode 100644 index 0000000..b7bec92 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_controller_registers.h @@ -0,0 +1,463 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_CONTROLLER_REGISTERS_H_ +#define _SCIC_SDS_CONTROLLER_REGISTERS_H_ + +/** + * This file contains macros used to perform the register reads/writes to the + * SCU hardware. + * + * + */ + +#include "scu_registers.h" +#include "scic_sds_controller.h" + +/** + * scic_sds_controller_smu_register_read() - + * + * SMU_REGISTER_ACCESS_MACROS + */ +#define scic_sds_controller_smu_register_read(controller, reg) \ + smu_register_read(\ + (controller), \ + (controller)->smu_registers->reg \ + ) + +#define scic_sds_controller_smu_register_write(controller, reg, value) \ + smu_register_write(\ + (controller), \ + (controller)->smu_registers->reg, \ + (value) \ + ) + +/** + * scu_afe_register_write() - + * + * AFE_REGISTER_ACCESS_MACROS + */ +#define scu_afe_register_write(controller, reg, value) \ + scu_register_write(\ + (controller), \ + (controller)->scu_registers->afe.reg, \ + (value) \ + ) + +#define scu_afe_txreg_write(controller, phy, reg, value) \ + scu_register_write(\ + (controller), \ + (controller)->scu_registers->afe.scu_afe_xcvr[phy].reg,\ + (value) \ + ) + +#define scu_afe_register_read(controller, reg) \ + scu_register_read(\ + (controller), \ + (controller)->scu_registers->afe.reg \ + ) + +/** + * scu_controller_viit_register_write() - + * + * VIIT_REGISTER_ACCESS_MACROS + */ +#define scu_controller_viit_register_write(controller, index, reg, value) \ + scu_register_write(\ + (controller), \ + (controller)->scu_registers->peg0.viit[index].reg, \ + value \ + ) + +/* + * ***************************************************************************** + * * SMU REGISTERS + * ***************************************************************************** */ + +/** + * SMU_PCP_WRITE() - + * + * struct smu_registers + */ +#define SMU_PCP_WRITE(controller, value) \ + scic_sds_controller_smu_register_write(\ + controller, post_context_port, value \ + ) + +#define SMU_TCR_READ(controller, value) \ + scic_sds_controller_smu_register_read(\ + controller, task_context_range \ + ) + +#define SMU_TCR_WRITE(controller, value) \ + scic_sds_controller_smu_register_write(\ + controller, task_context_range, value \ + ) + +#define SMU_HTTBAR_WRITE(controller, address) \ + { \ + scic_sds_controller_smu_register_write(\ + controller, \ + host_task_table_lower, \ + lower_32_bits(address) \ + ); \ + scic_sds_controller_smu_register_write(\ + controller, \ + host_task_table_upper, \ + upper_32_bits(address) \ + ); \ + } + +#define SMU_CQBAR_WRITE(controller, address) \ + { \ + scic_sds_controller_smu_register_write(\ + controller, \ + completion_queue_lower, \ + lower_32_bits(address) \ + ); \ + scic_sds_controller_smu_register_write(\ + controller, \ + completion_queue_upper, \ + upper_32_bits(address) \ + ); \ + } + +#define SMU_CQGR_WRITE(controller, value) \ + scic_sds_controller_smu_register_write(\ + controller, completion_queue_get, value \ + ) + +#define SMU_CQGR_READ(controller, value) \ + scic_sds_controller_smu_register_read(\ + controller, completion_queue_get \ + ) + +#define SMU_CQPR_WRITE(controller, value) \ + scic_sds_controller_smu_register_write(\ + controller, completion_queue_put, value \ + ) + +#define SMU_RNCBAR_WRITE(controller, address) \ + { \ + scic_sds_controller_smu_register_write(\ + controller, \ + remote_node_context_lower, \ + lower_32_bits(address) \ + ); \ + scic_sds_controller_smu_register_write(\ + controller, \ + remote_node_context_upper, \ + upper_32_bits(address) \ + ); \ + } + +#define SMU_AMR_READ(controller) \ + scic_sds_controller_smu_register_read(\ + controller, address_modifier \ + ) + +#define SMU_IMR_READ(controller) \ + scic_sds_controller_smu_register_read(\ + controller, interrupt_mask \ + ) + +#define SMU_IMR_WRITE(controller, mask) \ + scic_sds_controller_smu_register_write(\ + controller, interrupt_mask, mask \ + ) + +#define SMU_ISR_READ(controller) \ + scic_sds_controller_smu_register_read(\ + controller, interrupt_status \ + ) + +#define SMU_ISR_WRITE(controller, status) \ + scic_sds_controller_smu_register_write(\ + controller, interrupt_status, status \ + ) + +#define SMU_ICC_READ(controller) \ + scic_sds_controller_smu_register_read(\ + controller, interrupt_coalesce_control \ + ) + +#define SMU_ICC_WRITE(controller, value) \ + scic_sds_controller_smu_register_write(\ + controller, interrupt_coalesce_control, value \ + ) + +#define SMU_CQC_WRITE(controller, value) \ + scic_sds_controller_smu_register_write(\ + controller, completion_queue_control, value \ + ) + +#define SMU_SMUSRCR_WRITE(controller, value) \ + scic_sds_controller_smu_register_write(\ + controller, soft_reset_control, value \ + ) + +#define SMU_TCA_WRITE(controller, index, value) \ + scic_sds_controller_smu_register_write(\ + controller, task_context_assignment[index], value \ + ) + +#define SMU_TCA_READ(controller, index) \ + scic_sds_controller_smu_register_read(\ + controller, task_context_assignment[index] \ + ) + +#define SMU_DCC_READ(controller) \ + scic_sds_controller_smu_register_read(\ + controller, device_context_capacity \ + ) + +#define SMU_DFC_READ(controller) \ + scic_sds_controller_smu_register_read(\ + controller, device_function_capacity \ + ) + +#define SMU_SMUCSR_READ(controller) \ + scic_sds_controller_smu_register_read(\ + controller, control_status \ + ) + +#define SMU_CQPR_READ(controller) \ + scic_sds_controller_smu_register_read(\ + controller, completion_queue_put \ + ) + + +/** + * scic_sds_controller_scu_register_read() - + * + * SCU_REGISTER_ACCESS_MACROS + */ +#define scic_sds_controller_scu_register_read(controller, reg) \ + scu_register_read(\ + (controller), \ + (controller)->scu_registers->reg \ + ) + +#define scic_sds_controller_scu_register_write(controller, reg, value) \ + scu_register_write(\ + (controller), \ + (controller)->scu_registers->reg, \ + (value) \ + ) + + +/* + * **************************************************************************** + * * SCU SDMA REGISTERS + * **************************************************************************** */ + +/** + * scu_sdma_register_read() - + * + * SCU_SDMA_REGISTER_ACCESS_MACROS + */ +#define scu_sdma_register_read(controller, reg) \ + scu_register_read(\ + (controller), \ + (controller)->scu_registers->sdma.reg \ + ) + +#define scu_sdma_register_write(controller, reg, value) \ + scu_register_write(\ + (controller), \ + (controller)->scu_registers->sdma.reg, \ + (value) \ + ) + +/** + * SCU_PUFATHAR_WRITE() - + * + * struct scu_sdma_registers + */ +#define SCU_PUFATHAR_WRITE(controller, address) \ + { \ + scu_sdma_register_write(\ + controller, \ + uf_address_table_lower, \ + lower_32_bits(address) \ + ); \ + scu_sdma_register_write(\ + controller, \ + uf_address_table_upper, \ + upper_32_bits(address) \ + ); \ + } + +#define SCU_UFHBAR_WRITE(controller, address) \ + { \ + scu_sdma_register_write(\ + controller, \ + uf_header_base_address_lower, \ + lower_32_bits(address) \ + ); \ + scu_sdma_register_write(\ + controller, \ + uf_header_base_address_upper, \ + upper_32_bits(address) \ + ); \ + } + +#define SCU_UFQC_READ(controller) \ + scu_sdma_register_read(\ + controller, \ + unsolicited_frame_queue_control \ + ) + +#define SCU_UFQC_WRITE(controller, value) \ + scu_sdma_register_write(\ + controller, \ + unsolicited_frame_queue_control, \ + value \ + ) + +#define SCU_UFQPP_READ(controller) \ + scu_sdma_register_read(\ + controller, \ + unsolicited_frame_put_pointer \ + ) + +#define SCU_UFQPP_WRITE(controller, value) \ + scu_sdma_register_write(\ + controller, \ + unsolicited_frame_put_pointer, \ + value \ + ) + +#define SCU_UFQGP_WRITE(controller, value) \ + scu_sdma_register_write(\ + controller, \ + unsolicited_frame_get_pointer, \ + value \ + ) + +#define SCU_PDMACR_READ(controller) \ + scu_sdma_register_read(\ + controller, \ + pdma_configuration \ + ) + +#define SCU_PDMACR_WRITE(controller, value) \ + scu_sdma_register_write(\ + controller, \ + pdma_configuration, \ + value \ + ) + +#define SCU_CDMACR_READ(controller) \ + scu_sdma_register_read(\ + controller, \ + cdma_configuration \ + ) + +#define SCU_CDMACR_WRITE(controller, value) \ + scu_sdma_register_write(\ + controller, \ + cdma_configuration, \ + value \ + ) + +/* + * ***************************************************************************** + * * SCU Port Task Scheduler Group Registers + * ***************************************************************************** */ + +/** + * scu_ptsg_register_read() - + * + * SCU_PTSG_REGISTER_ACCESS_MACROS + */ +#define scu_ptsg_register_read(controller, reg) \ + scu_register_read(\ + (controller), \ + (controller)->scu_registers->peg0.ptsg.reg \ + ) + +#define scu_ptsg_register_write(controller, reg, value) \ + scu_register_write(\ + (controller), \ + (controller)->scu_registers->peg0.ptsg.reg, \ + (value) \ + ) + +/** + * SCU_PTSGCR_READ() - + * + * SCU_PTSG_REGISTERS + */ +#define SCU_PTSGCR_READ(controller) \ + scu_ptsg_register_read(\ + (controller), \ + control \ + ) + +#define SCU_PTSGCR_WRITE(controller, value) \ + scu_ptsg_register_write(\ + (controller), \ + control, \ + value \ + ) + +#define SCU_PTSGRTC_READ(controller) \ + scu_ptsg_register_read(\ + contoller, \ + real_time_clock \ + ) + +#endif /* _SCIC_SDS_CONTROLLER_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_pci.h b/drivers/scsi/isci/core/scic_sds_pci.h new file mode 100644 index 0000000..2132677 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_pci.h @@ -0,0 +1,95 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_PCI_H_ +#define _SCIC_SDS_PCI_H_ + +/** + * This file contains the prototypes/macros utilized in writing out PCI data + * for the SCI core. + * + * + */ + +#include +#include "sci_types.h" + +struct scic_sds_controller; + +void scic_sds_pci_bar_initialization(struct scic_sds_controller *scic); + +/* for debug we separate scu and smu accesses and require a controller */ +static inline u32 scic_sds_pci_read_smu_dword(struct scic_sds_controller *scic, void __iomem *addr) +{ + return readl(addr); +} + +static inline void scic_sds_pci_write_smu_dword(struct scic_sds_controller *scic, void __iomem *addr, u32 value) +{ + writel(value, addr); +} + +static inline u32 scic_sds_pci_read_scu_dword(struct scic_sds_controller *scic, void __iomem *addr) +{ + return readl(addr); +} + +static inline void scic_sds_pci_write_scu_dword(struct scic_sds_controller *scic, void __iomem *addr, u32 value) +{ + writel(value, addr); +} + + +#endif /* _SCIC_SDS_PCI_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c new file mode 100644 index 0000000..7d012b5 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -0,0 +1,2807 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "intel_ata.h" +#include "intel_sata.h" +#include "sci_base_state.h" +#include "sci_base_state_machine.h" +#include "scic_phy.h" +#include "scic_sds_controller.h" +#include "scic_sds_phy.h" +#include "scic_sds_phy_registers.h" +#include "scic_sds_port.h" +#include "scic_user_callback.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_event_codes.h" + +#define SCIC_SDS_PHY_MIN_TIMER_COUNT (SCI_MAX_PHYS) +#define SCIC_SDS_PHY_MAX_TIMER_COUNT (SCI_MAX_PHYS) + +/* Maximum arbitration wait time in micro-seconds */ +#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) + +/* + * ***************************************************************************** + * * SCIC SDS PHY Internal Methods + * ***************************************************************************** */ + +/** + * This method will initialize the phy link layer registers + * @this_phy: + * @link_layer_registers: + * + * enum sci_status + */ +static enum sci_status scic_sds_phy_link_layer_initialization( + struct scic_sds_phy *this_phy, + struct scu_link_layer_registers *link_layer_registers) +{ + u32 phy_configuration; + struct sas_capabilities phy_capabilities; + u32 parity_check = 0; + u32 parity_count = 0; + u32 link_layer_control; + + this_phy->link_layer_registers = link_layer_registers; + + /* Set our IDENTIFY frame data */ + #define SCI_END_DEVICE 0x01 + + SCU_SAS_TIID_WRITE( + this_phy, + (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) + | SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) + | SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) + | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) + | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE)) + ); + + /* Write the device SAS Address */ + SCU_SAS_TIDNH_WRITE(this_phy, 0xFEDCBA98); + SCU_SAS_TIDNL_WRITE(this_phy, this_phy->phy_index); + + /* Write the source SAS Address */ + SCU_SAS_TISSAH_WRITE( + this_phy, + this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[ + this_phy->phy_index].sas_address.high + ); + SCU_SAS_TISSAL_WRITE( + this_phy, + this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[ + this_phy->phy_index].sas_address.low + ); + + /* Clear and Set the PHY Identifier */ + SCU_SAS_TIPID_WRITE(this_phy, 0x00000000); + SCU_SAS_TIPID_WRITE(this_phy, SCU_SAS_TIPID_GEN_VALUE(ID, this_phy->phy_index)); + + /* Change the initial state of the phy configuration register */ + phy_configuration = SCU_SAS_PCFG_READ(this_phy); + + /* Hold OOB state machine in reset */ + phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + SCU_SAS_PCFG_WRITE(this_phy, phy_configuration); + + /* Configure the SNW capabilities */ + phy_capabilities.u.all = 0; + phy_capabilities.u.bits.start = 1; + phy_capabilities.u.bits.gen3_without_ssc_supported = 1; + phy_capabilities.u.bits.gen2_without_ssc_supported = 1; + phy_capabilities.u.bits.gen1_without_ssc_supported = 1; + if (this_phy->owning_port->owning_controller->oem_parameters.sds1. + controller.do_enable_ssc == true) { + phy_capabilities.u.bits.gen3_with_ssc_supported = 1; + phy_capabilities.u.bits.gen2_with_ssc_supported = 1; + phy_capabilities.u.bits.gen1_with_ssc_supported = 1; + } + + /* + * The SAS specification indicates that the phy_capabilities that + * are transmitted shall have an even parity. Calculate the parity. */ + parity_check = phy_capabilities.u.all; + while (parity_check != 0) { + if (parity_check & 0x1) + parity_count++; + parity_check >>= 1; + } + + /* + * If parity indicates there are an odd number of bits set, then + * set the parity bit to 1 in the phy capabilities. */ + if ((parity_count % 2) != 0) + phy_capabilities.u.bits.parity = 1; + + SCU_SAS_PHYCAP_WRITE(this_phy, phy_capabilities.u.all); + + /* Set the enable spinup period but disable the ability to send notify enable spinup */ + SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT, 0x33)); + +#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) || defined(CONFIG_PBG_HBA_BETA) + /* / @todo Provide a way to write this register correctly */ + scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x02108421); +#else + /* / @todo Provide a way to write this register correctly */ + scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x0e739ce7); +#endif + + link_layer_control = SCU_SAS_LLCTL_GEN_VAL( + NO_OUTBOUND_TASK_TIMEOUT, + (u8)this_phy->owning_port->owning_controller-> + user_parameters.sds1.no_outbound_task_timeout + ); + +/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 */ +/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 */ +#define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 + + if (this_phy->owning_port->owning_controller->user_parameters.sds1. + phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN3_SPEED) { + link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( + MAX_LINK_RATE, COMPILED_MAX_LINK_RATE + ); + } else if (this_phy->owning_port->owning_controller->user_parameters.sds1. + phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN2_SPEED) { + link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( + MAX_LINK_RATE, + min( + SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2, + COMPILED_MAX_LINK_RATE) + ); + } else { + link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( + MAX_LINK_RATE, + min( + SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1, + COMPILED_MAX_LINK_RATE) + ); + } + + scu_link_layer_register_write( + this_phy, link_layer_control, link_layer_control + ); + + /* + * Program the max ARB time for the PHY to 700us so we inter-operate with + * the PMC expander which shuts down PHYs if the expander PHY generates too + * many breaks. This time value will guarantee that the initiator PHY will + * generate the break. */ +#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) + scu_link_layer_register_write( + this_phy, + maximum_arbitration_wait_timer_timeout, + SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME + ); +#endif /* defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) */ + + /* + * Set the link layer hang detection to 500ms (0x1F4) from its default + * value of 128ms. Max value is 511 ms. */ + scu_link_layer_register_write( + this_phy, link_layer_hang_detection_timeout, 0x1F4 + ); + + /* We can exit the initial state to the stopped state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_STOPPED + ); + + return SCI_SUCCESS; +} + +/** + * This function will handle the sata SIGNATURE FIS timeout condition. It will + * restart the starting substate machine since we dont know what has actually + * happening. + */ +static void scic_sds_phy_sata_timeout(void *phy) +{ + struct scic_sds_phy *sci_phy = phy; + + dev_dbg(sciphy_to_dev(sci_phy), + "%s: SCIC SDS Phy 0x%p did not receive signature fis before " + "timeout.\n", + __func__, + sci_phy); + + sci_base_state_machine_stop( + scic_sds_phy_get_starting_substate_machine(sci_phy)); + + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(sci_phy), + SCI_BASE_PHY_STATE_STARTING + ); +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY External Methods + * ***************************************************************************** */ + +/** + * This method returns the object size for a phy object. + * + * u32 + */ + +/** + * This method returns the minimum number of timers required for a phy object. + * + * u32 + */ + +/** + * This method returns the maximum number of timers required for a phy object. + * + * u32 + */ + +#ifdef SCIC_DEBUG_ENABLED +/** + * scic_sds_phy_observe_state_change() - + * @our_observer: + * + * Debug code to record the state transitions in the phy + */ +void scic_sds_phy_observe_state_change( + struct sci_base_observer *our_observer, + struct sci_base_subject *the_subject) +{ + struct scic_sds_phy *this_phy; + struct sci_base_state_machine *the_state_machine; + + u8 transition_requestor; + u32 base_state_id; + u32 starting_substate_id; + + the_state_machine = (struct sci_base_state_machine *)the_subject; + this_phy = (struct scic_sds_phy *)the_state_machine->state_machine_owner; + + if (the_state_machine == &this_phy->parent.state_machine) { + transition_requestor = 0x01; + } else if (the_state_machine == &this_phy->starting_substate_machine) { + transition_requestor = 0x02; + } else { + transition_requestor = 0xFF; + } + + base_state_id = + sci_base_state_machine_get_state(&this_phy->parent.state_machine); + starting_substate_id = + sci_base_state_machine_get_state(&this_phy->starting_substate_machine); + + this_phy->state_record.state_transition_table[ + this_phy->state_record.index++] = ((transition_requestor << 24) + | ((u8)base_state_id << 8) + | ((u8)starting_substate_id)); + + this_phy->state_record.index = + this_phy->state_record.index & (MAX_STATE_TRANSITION_RECORD - 1); + +} +#endif /* SCIC_DEBUG_ENABLED */ + +#ifdef SCIC_DEBUG_ENABLED +/** + * scic_sds_phy_initialize_state_recording() - + * + * This method initializes the state record debug information for the phy + * object. The state machines for the phy object must be constructed before + * this function is called. + */ +void scic_sds_phy_initialize_state_recording( + struct scic_sds_phy *this_phy) +{ + this_phy->state_record.index = 0; + + sci_base_observer_initialize( + &this_phy->state_record.base_state_observer, + scic_sds_phy_observe_state_change, + &this_phy->parent.state_machine.parent + ); + + sci_base_observer_initialize( + &this_phy->state_record.starting_state_observer, + scic_sds_phy_observe_state_change, + &this_phy->starting_substate_machine.parent + ); +} +#endif /* SCIC_DEBUG_ENABLED */ + +/** + * This method will construct the struct scic_sds_phy object + * @this_phy: + * @owning_port: + * @phy_index: + * + */ +void scic_sds_phy_construct( + struct scic_sds_phy *this_phy, + struct scic_sds_port *owning_port, + u8 phy_index) +{ + /* + * Call the base constructor first + */ + sci_base_phy_construct( + &this_phy->parent, + scic_sds_phy_state_table + ); + + /* Copy the rest of the input data to our locals */ + this_phy->owning_port = owning_port; + this_phy->phy_index = phy_index; + this_phy->bcn_received_while_port_unassigned = false; + this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + this_phy->link_layer_registers = NULL; + this_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; + + /* Clear out the identification buffer data */ + memset(&this_phy->phy_type, 0, sizeof(this_phy->phy_type)); + + /* Initialize the the substate machines */ + sci_base_state_machine_construct( + &this_phy->starting_substate_machine, + &this_phy->parent.parent, + scic_sds_phy_starting_substates, + SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL + ); + + #ifdef SCIC_DEBUG_ENABLED + scic_sds_phy_initialize_state_recording(this_phy); + #endif /* SCIC_DEBUG_ENABLED */ +} + +/** + * This method returns the port currently containing this phy. If the phy is + * currently contained by the dummy port, then the phy is considered to not + * be part of a port. + * @this_phy: This parameter specifies the phy for which to retrieve the + * containing port. + * + * This method returns a handle to a port that contains the supplied phy. + * SCI_INVALID_HANDLE This value is returned if the phy is not part of a real + * port (i.e. it's contained in the dummy port). !SCI_INVALID_HANDLE All other + * values indicate a handle/pointer to the port containing the phy. + */ +struct scic_sds_port *scic_sds_phy_get_port( + struct scic_sds_phy *this_phy) +{ + if (scic_sds_port_get_index(this_phy->owning_port) == SCIC_SDS_DUMMY_PORT) + return SCI_INVALID_HANDLE; + + return this_phy->owning_port; +} + +/** + * This method will assign a port to the phy object. + * @out]: this_phy This parameter specifies the phy for which to assign a port + * object. + * + * + */ +void scic_sds_phy_set_port( + struct scic_sds_phy *this_phy, + struct scic_sds_port *the_port) +{ + this_phy->owning_port = the_port; + + if (this_phy->bcn_received_while_port_unassigned) { + this_phy->bcn_received_while_port_unassigned = false; + scic_sds_port_broadcast_change_received(this_phy->owning_port, this_phy); + } +} + +/** + * This method will initialize the constructed phy + * @sci_phy: + * @link_layer_registers: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_initialize( + struct scic_sds_phy *sci_phy, + struct scu_link_layer_registers *link_layer_registers) +{ + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_phy->sata_timeout_timer = scic_cb_timer_create( + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_sata_timeout, + sci_phy + ); + + /* Perofrm the initialization of the PE hardware */ + scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); + + /* + * There is nothing that needs to be done in this state just + * transition to the stopped state. */ + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(sci_phy), + SCI_BASE_PHY_STATE_STOPPED + ); + + return SCI_SUCCESS; +} + + +/** + * + * @this_phy: The phy object to be suspended. + * + * This function will perform the register reads/writes to suspend the SCU + * hardware protocol engine. none + */ +void scic_sds_phy_suspend( + struct scic_sds_phy *this_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + + SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); +} + +/** + * + * @this_phy: The phy object to resume. + * + * This function will perform the register reads/writes required to resume the + * SCU hardware protocol engine. none + */ +void scic_sds_phy_resume( + struct scic_sds_phy *this_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + + SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); +} + +/** + * This method returns the local sas address assigned to this phy. + * @this_phy: This parameter specifies the phy for which to retrieve the local + * SAS address. + * @sas_address: This parameter specifies the location into which to copy the + * local SAS address. + * + */ +void scic_sds_phy_get_sas_address( + struct scic_sds_phy *this_phy, + struct sci_sas_address *sas_address) +{ + sas_address->high = SCU_SAS_TISSAH_READ(this_phy); + sas_address->low = SCU_SAS_TISSAL_READ(this_phy); +} + +/** + * This method returns the remote end-point (i.e. attached) sas address + * assigned to this phy. + * @this_phy: This parameter specifies the phy for which to retrieve the remote + * end-point SAS address. + * @sas_address: This parameter specifies the location into which to copy the + * remote end-point SAS address. + * + */ +void scic_sds_phy_get_attached_sas_address( + struct scic_sds_phy *this_phy, + struct sci_sas_address *sas_address) +{ + sas_address->high + = this_phy->phy_type.sas.identify_address_frame_buffer.sas_address.high; + sas_address->low + = this_phy->phy_type.sas.identify_address_frame_buffer.sas_address.low; +} + +/** + * This method returns the supported protocols assigned to this phy + * @this_phy: + * + * + */ +void scic_sds_phy_get_protocols( + struct scic_sds_phy *this_phy, + struct sci_sas_identify_address_frame_protocols *protocols) +{ + protocols->u.all = (u16)(SCU_SAS_TIID_READ(this_phy) & 0x0000FFFF); +} + +/** + * + * @this_phy: The parameter is the phy object for which the attached phy + * protcols are to be returned. + * + * This method returns the supported protocols for the attached phy. If this + * is a SAS phy the protocols are returned from the identify address frame. If + * this is a SATA phy then protocols are made up and the target phy is an STP + * target phy. The caller will get the entire set of bits for the protocol + * value. + */ +void scic_sds_phy_get_attached_phy_protocols( + struct scic_sds_phy *this_phy, + struct sci_sas_identify_address_frame_protocols *protocols) +{ + protocols->u.all = 0; + + if (this_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + protocols->u.all = + this_phy->phy_type.sas.identify_address_frame_buffer.protocols.u.all; + } else if (this_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { + protocols->u.bits.stp_target = 1; + } +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY Handler Redirects + * ***************************************************************************** */ + +/** + * This method will attempt to start the phy object. This request is only valid + * when the phy is in the stopped state + * @this_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_start( + struct scic_sds_phy *this_phy) +{ + return this_phy->state_handlers->parent.start_handler(&this_phy->parent); +} + +/** + * This method will attempt to stop the phy object. + * @this_phy: + * + * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE if the + * phy is not in a valid state to stop + */ +enum sci_status scic_sds_phy_stop( + struct scic_sds_phy *this_phy) +{ + return this_phy->state_handlers->parent.stop_handler(&this_phy->parent); +} + +/** + * This method will attempt to reset the phy. This request is only valid when + * the phy is in an ready state + * @this_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_reset( + struct scic_sds_phy *this_phy) +{ + return this_phy->state_handlers->parent.reset_handler( + &this_phy->parent + ); +} + +/** + * This method will process the event code received. + * @this_phy: + * @event_code: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + return this_phy->state_handlers->event_handler(this_phy, event_code); +} + +/** + * This method will process the frame index received. + * @this_phy: + * @frame_index: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_frame_handler( + struct scic_sds_phy *this_phy, + u32 frame_index) +{ + return this_phy->state_handlers->frame_handler(this_phy, frame_index); +} + +/** + * This method will give the phy permission to consume power + * @this_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_consume_power_handler( + struct scic_sds_phy *this_phy) +{ + return this_phy->state_handlers->consume_power_handler(this_phy); +} + +/* + * ***************************************************************************** + * * SCIC PHY Public Methods + * ***************************************************************************** */ + + +enum sci_status scic_sas_phy_get_properties( + struct scic_sds_phy *sci_phy, + struct scic_sas_phy_properties *properties) +{ + if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + memcpy( + &properties->received_iaf, + &sci_phy->phy_type.sas.identify_address_frame_buffer, + sizeof(struct sci_sas_identify_address_frame) + ); + + properties->received_capabilities.u.all + = SCU_SAS_RECPHYCAP_READ(sci_phy); + + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + + +enum sci_status scic_sata_phy_get_properties( + struct scic_sds_phy *sci_phy, + struct scic_sata_phy_properties *properties) +{ + if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { + memcpy( + &properties->signature_fis, + &sci_phy->phy_type.sata.signature_fis_buffer, + sizeof(struct sata_fis_reg_d2h) + ); + + /* / @todo add support for port selectors. */ + properties->is_port_selector_present = false; + + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY HELPER FUNCTIONS + * ***************************************************************************** */ + + +/** + * + * @this_phy: The phy object that received SAS PHY DETECTED. + * + * This method continues the link training for the phy as if it were a SAS PHY + * instead of a SATA PHY. This is done because the completion queue had a SAS + * PHY DETECTED event when the state machine was expecting a SATA PHY event. + * none + */ +static void scic_sds_phy_start_sas_link_training( + struct scic_sds_phy *this_phy) +{ + u32 phy_control; + + phy_control = SCU_SAS_PCFG_READ(this_phy); + phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); + SCU_SAS_PCFG_WRITE(this_phy, phy_control); + + sci_base_state_machine_change_state( + &this_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN + ); + + this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; +} + +/** + * + * @this_phy: The phy object that received a SATA SPINUP HOLD event + * + * This method continues the link training for the phy as if it were a SATA PHY + * instead of a SAS PHY. This is done because the completion queue had a SATA + * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none + */ +static void scic_sds_phy_start_sata_link_training( + struct scic_sds_phy *this_phy) +{ + sci_base_state_machine_change_state( + &this_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER + ); + + this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; +} + +/** + * This method performs processing common to all protocols upon completion of + * link training. + * @this_phy: This parameter specifies the phy object for which link training + * has completed. + * @max_link_rate: This parameter specifies the maximum link rate to be + * associated with this phy. + * @next_state: This parameter specifies the next state for the phy's starting + * sub-state machine. + * + */ +static void scic_sds_phy_complete_link_training( + struct scic_sds_phy *this_phy, + enum sci_sas_link_rate max_link_rate, + u32 next_state) +{ + this_phy->max_negotiated_speed = max_link_rate; + + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), next_state + ); +} + +/** + * + * @this_phy: The struct scic_sds_phy object to restart. + * + * This method restarts the struct scic_sds_phy objects base state machine in the + * starting state from any starting substate. none + */ +static void scic_sds_phy_restart_starting_state( + struct scic_sds_phy *this_phy) +{ + /* Stop the current substate machine */ + sci_base_state_machine_stop( + scic_sds_phy_get_starting_substate_machine(this_phy) + ); + + /* Re-enter the base state machine starting state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_STARTING + ); +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY EVENT_HANDLERS + * ***************************************************************************** */ + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - + * decode the event - sas phy detected causes a state transition to the wait + * for speed event notification. - any other events log a warning message and + * set a failure status enum sci_status SCI_SUCCESS on any valid event notification + * SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + scic_sds_phy_start_sas_link_training(this_phy); + this_phy->is_in_link_training = true; + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + scic_sds_phy_start_sata_link_training(this_phy); + this_phy->is_in_link_training = true; + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - + * decode the event - sas phy detected returns us back to this state. - speed + * event detected causes a state transition to the wait for iaf. - identify + * timeout is an un-expected event and the state machine is restarted. - link + * failure events restart the starting state machine - any other events log a + * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid + * event notification SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * Why is this being reported again by the controller? + * We would re-enter this state so just stay here */ + break; + + case SCU_EVENT_SAS_15: + case SCU_EVENT_SAS_15_SSC: + scic_sds_phy_complete_link_training( + this_phy, SCI_SAS_150_GB, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + ); + break; + + case SCU_EVENT_SAS_30: + case SCU_EVENT_SAS_30_SSC: + scic_sds_phy_complete_link_training( + this_phy, SCI_SAS_300_GB, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + ); + break; + + case SCU_EVENT_SAS_60: + case SCU_EVENT_SAS_60_SSC: + scic_sds_phy_complete_link_training( + this_phy, SCI_SAS_600_GB, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + ); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + scic_sds_phy_start_sata_link_training(this_phy); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(this_phy); + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - + * decode the event - sas phy detected event backs up the state machine to the + * await speed notification. - identify timeout is an un-expected event and the + * state machine is restarted. - link failure events restart the starting state + * machine - any other events log a warning message and set a failure status + * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any + * unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* Backup the state machine */ + scic_sds_phy_start_sas_link_training(this_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + scic_sds_phy_start_sata_link_training(this_phy); + break; + + case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: + case SCU_EVENT_LINK_FAILURE: + case SCU_EVENT_HARD_RESET_RECEIVED: + /* Start the oob/sn state machine over again */ + scic_sds_phy_restart_starting_state(this_phy); + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. - + * decode the event - link failure events restart the starting state machine - + * any other events log a warning message and set a failure status enum sci_status + * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event + * notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(this_phy); + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received unexpected " + "event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - + * decode the event - link failure events restart the starting state machine - + * sata spinup hold events are ignored since they are expected - any other + * events log a warning message and set a failure status enum sci_status SCI_SUCCESS + * on a link failure event SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(this_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events are received every 10ms and are expected while in this state */ + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + scic_sds_phy_start_sas_link_training(this_phy); + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - + * decode the event - link failure events restart the starting state machine - + * sata spinup hold events are ignored since they are expected - sata phy + * detected event change to the wait speed event - any other events log a + * warning message and set a failure status enum sci_status SCI_SUCCESS on a link + * failure event SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(this_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * These events might be received since we dont know how many may be in + * the completion queue while waiting for power */ + break; + + case SCU_EVENT_SATA_PHY_DETECTED: + this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + + /* We have received the SATA PHY notification change state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN + ); + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + scic_sds_phy_start_sas_link_training(this_phy); + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. + * - decode the event - sata phy detected returns us back to this state. - + * speed event detected causes a state transition to the wait for signature. - + * link failure events restart the starting state machine - any other events + * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any + * valid event notification SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* + * The hardware reports multiple SATA PHY detected events + * ignore the extras */ + break; + + case SCU_EVENT_SATA_15: + case SCU_EVENT_SATA_15_SSC: + scic_sds_phy_complete_link_training( + this_phy, + SCI_SAS_150_GB, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF + ); + break; + + case SCU_EVENT_SATA_30: + case SCU_EVENT_SATA_30_SSC: + scic_sds_phy_complete_link_training( + this_phy, + SCI_SAS_300_GB, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF + ); + break; + + case SCU_EVENT_SATA_60: + case SCU_EVENT_SATA_60_SSC: + scic_sds_phy_complete_link_training( + this_phy, + SCI_SAS_600_GB, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF + ); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(this_phy); + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + scic_sds_phy_start_sas_link_training(this_phy); + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - + * decode the event - sas phy detected event backs up the state machine to the + * await speed notification. - identify timeout is an un-expected event and the + * state machine is restarted. - link failure events restart the starting state + * machine - any other events log a warning message and set a failure status + * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any + * unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* Backup the state machine */ + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN + ); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(this_phy); + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + + +/* + * ***************************************************************************** + * * SCIC SDS PHY FRAME_HANDLERS + * ***************************************************************************** */ + +/** + * + * @phy: This is struct scic_sds_phy object which is being requested to decode the + * frame data. + * @frame_index: This is the index of the unsolicited frame which was received + * for this phy. + * + * This method decodes the unsolicited frame when the struct scic_sds_phy is in the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF + * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change + * starting substate to wait power. - else - log warning message of unexpected + * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler( + struct scic_sds_phy *this_phy, + u32 frame_index) +{ + enum sci_status result; + u32 *frame_words; + struct sci_sas_identify_address_frame *identify_frame; + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_phy_get_controller(this_phy)->uf_control), + frame_index, + (void **)&frame_words); + + if (result != SCI_SUCCESS) { + return result; + } + + frame_words[0] = SCIC_SWAP_DWORD(frame_words[0]); + identify_frame = (struct sci_sas_identify_address_frame *)frame_words; + + if (identify_frame->address_frame_type == 0) { + /* + * Byte swap the rest of the frame so we can make + * a copy of the buffer */ + frame_words[1] = SCIC_SWAP_DWORD(frame_words[1]); + frame_words[2] = SCIC_SWAP_DWORD(frame_words[2]); + frame_words[3] = SCIC_SWAP_DWORD(frame_words[3]); + frame_words[4] = SCIC_SWAP_DWORD(frame_words[4]); + frame_words[5] = SCIC_SWAP_DWORD(frame_words[5]); + + memcpy( + &this_phy->phy_type.sas.identify_address_frame_buffer, + identify_frame, + sizeof(struct sci_sas_identify_address_frame) + ); + + if (identify_frame->protocols.u.bits.smp_target) { + /* + * We got the IAF for an expander PHY go to the final state since + * there are no power requirements for expander phys. */ + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL + ); + } else { + /* We got the IAF we can now go to the await spinup semaphore state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER + ); + } + + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, + frame_index); + + /* Regardless of the result release this frame since we are done with it */ + scic_sds_controller_release_frame( + scic_sds_phy_get_controller(this_phy), frame_index + ); + + return result; +} + +/** + * + * @phy: This is struct scic_sds_phy object which is being requested to decode the + * frame data. + * @frame_index: This is the index of the unsolicited frame which was received + * for this phy. + * + * This method decodes the unsolicited frame when the struct scic_sds_phy is in the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If + * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS + * data buffer. - else - log warning message of unexpected unsolicted frame - + * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS + * data + */ +static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler( + struct scic_sds_phy *this_phy, + u32 frame_index) +{ + enum sci_status result; + u32 *frame_words; + struct sata_fis_header *fis_frame_header; + u32 *fis_frame_data; + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_phy_get_controller(this_phy)->uf_control), + frame_index, + (void **)&frame_words); + + if (result != SCI_SUCCESS) { + return result; + } + + fis_frame_header = (struct sata_fis_header *)frame_words; + + if ( + (fis_frame_header->fis_type == SATA_FIS_TYPE_REGD2H) + && !(fis_frame_header->status & ATA_STATUS_REG_BSY_BIT) + ) { + scic_sds_unsolicited_frame_control_get_buffer( + &(scic_sds_phy_get_controller(this_phy)->uf_control), + frame_index, + (void **)&fis_frame_data + ); + + scic_sds_controller_copy_sata_response( + &this_phy->phy_type.sata.signature_fis_buffer, + frame_words, + fis_frame_data + ); + + /* We got the IAF we can now go to the await spinup semaphore state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL + ); + + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, + frame_index); + + /* Regardless of the result release this frame since we are done with it */ + scic_sds_controller_release_frame( + scic_sds_phy_get_controller(this_phy), frame_index + ); + + return result; +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY POWER_HANDLERS + * ***************************************************************************** */ + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This method is called by the struct scic_sds_controller when the phy object is + * granted power. - The notify enable spinups are turned on for this phy object + * - The phy state machine is transitioned to the + * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler( + struct scic_sds_phy *this_phy) +{ + u32 enable_spinup; + + enable_spinup = SCU_SAS_ENSPINUP_READ(this_phy); + enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); + SCU_SAS_ENSPINUP_WRITE(this_phy, enable_spinup); + + /* Change state to the final state this substate machine has run to completion */ + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL + ); + + return SCI_SUCCESS; +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This method is called by the struct scic_sds_controller when the phy object is + * granted power. - The phy state machine is transitioned to the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler( + struct scic_sds_phy *this_phy) +{ + u32 scu_sas_pcfg_value; + + /* Release the spinup hold state and reset the OOB state machine */ + scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + + /* Now restart the OOB operation */ + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + + /* Change state to the final state this substate machine has run to completion */ + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN + ); + + return SCI_SUCCESS; +} + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_phy_state_handler +scic_sds_phy_starting_substate_handler_table[SCIC_SDS_PHY_STARTING_MAX_SUBSTATES] = +{ + /* SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_default_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_starting_substate_await_ossp_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, + scic_sds_phy_starting_substate_await_iaf_uf_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_starting_substate_await_sas_power_event_handler, + scic_sds_phy_starting_substate_await_sas_power_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER, */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_starting_substate_await_sata_power_event_handler, + scic_sds_phy_starting_substate_await_sata_power_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN, */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_starting_substate_await_sata_phy_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN, */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_starting_substate_await_sata_speed_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF, */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_starting_substate_await_sig_fis_frame_handler, + scic_sds_phy_starting_substate_await_sig_fis_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_default_event_handler, + scic_sds_phy_default_consume_power_handler + } +}; + +/** + * scic_sds_phy_set_starting_substate_handlers() - + * + * This macro sets the starting substate handlers by state_id + */ +#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \ + scic_sds_phy_set_state_handlers(\ + (phy), \ + &scic_sds_phy_starting_substate_handler_table[(state_id)] \ + ) + +/* + * **************************************************************************** + * * PHY STARTING SUBSTATE METHODS + * **************************************************************************** */ + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state + * handlers are put in place for the struct scic_sds_phy object. - The state is + * changed to the wait phy type event notification. none + */ +static void scic_sds_phy_starting_initial_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); + + /* This is just an temporary state go off to the starting state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_starting_substate_machine(this_phy), + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_ossp_en_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_iaf_uf_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the + * struct scic_sds_phy object state handlers for this state. - Add this phy object to + * the power control queue none + */ +static void scic_sds_phy_starting_await_sas_power_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER + ); + + scic_sds_controller_power_control_queue_insert( + scic_sds_phy_get_controller(this_phy), + this_phy + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the + * struct scic_sds_phy object from the power control queue. none + */ +static void scic_sds_phy_starting_await_sas_power_substate_exit( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_controller_power_control_queue_remove( + scic_sds_phy_get_controller(this_phy), this_phy + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the + * struct scic_sds_phy object state handlers for this state. - Add this phy object to + * the power control queue none + */ +static void scic_sds_phy_starting_await_sata_power_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER + ); + + scic_sds_controller_power_control_queue_insert( + scic_sds_phy_get_controller(this_phy), + this_phy + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the + * struct scic_sds_phy object from the power control queue. none + */ +static void scic_sds_phy_starting_await_sata_power_substate_exit( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_controller_power_control_queue_remove( + scic_sds_phy_get_controller(this_phy), + this_phy + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sata_phy_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN + ); + + scic_cb_timer_start( + scic_sds_phy_get_controller(this_phy), + this_phy->sata_timeout_timer, + SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer + * that was started on entry to await sata phy event notification none + */ +static void scic_sds_phy_starting_await_sata_phy_substate_exit( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_cb_timer_stop( + scic_sds_phy_get_controller(this_phy), + this_phy->sata_timeout_timer + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sata_speed_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN + ); + + scic_cb_timer_start( + scic_sds_phy_get_controller(this_phy), + this_phy->sata_timeout_timer, + SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer + * that was started on entry to await sata phy event notification none + */ +static void scic_sds_phy_starting_await_sata_speed_substate_exit( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_cb_timer_stop( + scic_sds_phy_get_controller(this_phy), + this_phy->sata_timeout_timer + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the + * struct scic_sds_phy object state handlers for this state. - Start the SIGNATURE FIS + * timeout timer none + */ +static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter( + struct sci_base_object *object) +{ + bool continue_to_ready_state; + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF + ); + + continue_to_ready_state = scic_sds_port_link_detected( + this_phy->owning_port, + this_phy + ); + + if (continue_to_ready_state) { + /* + * Clear the PE suspend condition so we can actually receive SIG FIS + * The hardware will not respond to the XRDY until the PE suspend + * condition is cleared. */ + scic_sds_phy_resume(this_phy); + + scic_cb_timer_start( + scic_sds_phy_get_controller(this_phy), + this_phy->sata_timeout_timer, + SCIC_SDS_SIGNATURE_FIS_TIMEOUT + ); + } else { + this_phy->is_in_link_training = false; + } +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE + * FIS timeout timer. none + */ +static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_cb_timer_stop( + scic_sds_phy_get_controller(this_phy), + this_phy->sata_timeout_timer + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy + * object state handlers for this state. - Change base state machine to the + * ready state. none + */ +static void scic_sds_phy_starting_final_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_starting_substate_handlers( + this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL + ); + + /* + * State machine has run to completion so exit out and change + * the base state machine to the ready state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_READY); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_phy_starting_substates[] = { + [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { + .enter_state = scic_sds_phy_starting_initial_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { + .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { + .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { + .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { + .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, + .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { + .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { + .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { + .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { + .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, + .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { + .enter_state = scic_sds_phy_starting_final_substate_enter, + } +}; + +/* + * *************************************************************************** + * * DEFAULT HANDLERS + * *************************************************************************** */ + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This is the default method for phy a start request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_phy_default_start_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)phy; + + dev_warn(sciphy_to_dev(this_phy), + "%s: SCIC Phy 0x%p requested to start from invalid " + "state %d\n", + __func__, + this_phy, + sci_base_state_machine_get_state( + &this_phy->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; + +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This is the default method for phy a stop request. It will report a warning + * and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_phy_default_stop_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)phy; + + dev_warn(sciphy_to_dev(this_phy), + "%s: SCIC Phy 0x%p requested to stop from invalid " + "state %d\n", + __func__, + this_phy, + sci_base_state_machine_get_state( + &this_phy->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This is the default method for phy a reset request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_phy_default_reset_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)phy; + + dev_warn(sciphy_to_dev(this_phy), + "%s: SCIC Phy 0x%p requested to reset from invalid state " + "%d\n", + __func__, + this_phy, + sci_base_state_machine_get_state( + &this_phy->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This is the default method for phy a destruct request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_phy_default_destroy_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)phy; + + /* / @todo Implement something for the default */ + dev_warn(sciphy_to_dev(this_phy), + "%s: SCIC Phy 0x%p requested to destroy from invalid " + "state %d\n", + __func__, + this_phy, + sci_base_state_machine_get_state( + &this_phy->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * @frame_index: This is the frame index that was received from the SCU + * hardware. + * + * This is the default method for a phy frame handling request. It will report + * a warning, release the frame and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_phy_default_frame_handler( + struct scic_sds_phy *this_phy, + u32 frame_index) +{ + dev_warn(sciphy_to_dev(this_phy), + "%s: SCIC Phy 0x%p received unexpected frame data %d " + "while in state %d\n", + __func__, + this_phy, + frame_index, + sci_base_state_machine_get_state( + &this_phy->parent.state_machine)); + + scic_sds_controller_release_frame( + scic_sds_phy_get_controller(this_phy), frame_index); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * @event_code: This is the event code that was received from the SCU hardware. + * + * This is the default method for a phy event handler. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_phy_default_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + dev_warn(sciphy_to_dev(this_phy), + "%s: SCIC Phy 0x%p received unexpected event status %x " + "while in state %d\n", + __func__, + this_phy, + event_code, + sci_base_state_machine_get_state( + &this_phy->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This is the default method for a phy consume power handler. It will report + * a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_phy_default_consume_power_handler( + struct scic_sds_phy *this_phy) +{ + dev_warn(sciphy_to_dev(this_phy), + "%s: SCIC Phy 0x%p given unexpected permission to consume " + "power while in state %d\n", + __func__, + this_phy, + sci_base_state_machine_get_state( + &this_phy->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/* + * ****************************************************************************** + * * PHY STOPPED STATE HANDLERS + * ****************************************************************************** */ + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This method takes the struct scic_sds_phy from a stopped state and attempts to + * start it. - The phy state machine is transitioned to the + * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_stopped_state_start_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)phy; + + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_STARTING + ); + + return SCI_SUCCESS; +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This method takes the struct scic_sds_phy from a stopped state and destroys it. - + * This function takes no action. Shouldnt this function transition the + * struct sci_base_phy::state_machine to the SCI_BASE_PHY_STATE_FINAL? enum sci_status + * SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_stopped_state_destroy_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)phy; + + /* / @todo what do we actually need to do here? */ + return SCI_SUCCESS; +} + +/* + * ****************************************************************************** + * * PHY STARTING STATE HANDLERS + * ****************************************************************************** */ + +/* All of these state handlers are mapped to the starting sub-state machine */ + +/* + * ****************************************************************************** + * * PHY READY STATE HANDLERS + * ****************************************************************************** */ + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This method takes the struct scic_sds_phy from a ready state and attempts to stop + * it. - The phy state machine is transitioned to the + * SCI_BASE_PHY_STATE_STOPPED. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_ready_state_stop_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)phy; + + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_STOPPED + ); + + return SCI_SUCCESS; +} + +/** + * + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This method takes the struct scic_sds_phy from a ready state and attempts to reset + * it. - The phy state machine is transitioned to the + * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_ready_state_reset_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)phy; + + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_RESETTING + ); + + return SCI_SUCCESS; +} + +/** + * + * @phy: This is the struct scic_sds_phy object which has received the event. + * + * This method request the struct scic_sds_phy handle the received event. The only + * event that we are interested in while in the ready state is the link failure + * event. - decoded event is a link failure - transition the struct scic_sds_phy back + * to the SCI_BASE_PHY_STATE_STARTING state. - any other event recived will + * report a warning message enum sci_status SCI_SUCCESS if the event received is a + * link failure SCI_FAILURE_INVALID_STATE for any other event received. + */ +static enum sci_status scic_sds_phy_ready_state_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + enum sci_status result = SCI_FAILURE; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_STARTING + ); + + result = SCI_SUCCESS; + break; + + case SCU_EVENT_BROADCAST_CHANGE: + /* Broadcast change received. Notify the port. */ + if (scic_sds_phy_get_port(this_phy) != SCI_INVALID_HANDLE) + scic_sds_port_broadcast_change_received(this_phy->owning_port, this_phy); + else + this_phy->bcn_received_while_port_unassigned = true; + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%sP SCIC PHY 0x%p ready state machine received " + "unexpected event_code %x\n", + __func__, + this_phy, + event_code); + + result = SCI_FAILURE_INVALID_STATE; + break; + } + + return result; +} + +/* --------------------------------------------------------------------------- */ + +/** + * + * @this_phy: This is the struct scic_sds_phy object which is receiving the event. + * @event_code: This is the event code to be processed. + * + * This is the resetting state event handler. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_phy_resetting_state_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code) +{ + enum sci_status result = SCI_FAILURE; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_HARD_RESET_TRANSMITTED: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_STARTING + ); + + result = SCI_SUCCESS; + break; + + default: + dev_warn(sciphy_to_dev(this_phy), + "%s: SCIC PHY 0x%p resetting state machine received " + "unexpected event_code %x\n", + __func__, + this_phy, + event_code); + + result = SCI_FAILURE_INVALID_STATE; + break; + } + + return result; +} + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_phy_state_handler +scic_sds_phy_state_handler_table[SCI_BASE_PHY_MAX_STATES] = +{ + /* SCI_BASE_PHY_STATE_INITIAL */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_default_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCI_BASE_PHY_STATE_STOPPED */ + { + { + scic_sds_phy_stopped_state_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_stopped_state_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_default_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCI_BASE_PHY_STATE_STARTING */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_default_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCI_BASE_PHY_STATE_READY */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_ready_state_stop_handler, + scic_sds_phy_ready_state_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_ready_state_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCI_BASE_PHY_STATE_RESETTING */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_resetting_state_event_handler, + scic_sds_phy_default_consume_power_handler + }, + /* SCI_BASE_PHY_STATE_FINAL */ + { + { + scic_sds_phy_default_start_handler, + scic_sds_phy_default_stop_handler, + scic_sds_phy_default_reset_handler, + scic_sds_phy_default_destroy_handler + }, + scic_sds_phy_default_frame_handler, + scic_sds_phy_default_event_handler, + scic_sds_phy_default_consume_power_handler + } +}; + +/* + * **************************************************************************** + * * PHY STATE PRIVATE METHODS + * **************************************************************************** */ + +/** + * + * @this_phy: This is the struct scic_sds_phy object to stop. + * + * This method will stop the struct scic_sds_phy object. This does not reset the + * protocol engine it just suspends it and places it in a state where it will + * not cause the end device to power up. none + */ +static void scu_link_layer_stop_protocol_engine( + struct scic_sds_phy *this_phy) +{ + u32 scu_sas_pcfg_value; + u32 enable_spinup_value; + + /* Suspend the protocol engine and place it in a sata spinup hold state */ + scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value |= ( + SCU_SAS_PCFG_GEN_BIT(OOB_RESET) + | SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) + | SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) + ); + SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + + /* Disable the notify enable spinup primitives */ + enable_spinup_value = SCU_SAS_ENSPINUP_READ(this_phy); + enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); + SCU_SAS_ENSPINUP_WRITE(this_phy, enable_spinup_value); +} + +/** + * + * + * This method will start the OOB/SN state machine for this struct scic_sds_phy object. + */ +static void scu_link_layer_start_oob( + struct scic_sds_phy *this_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); + + SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); +} + +/** + * + * + * This method will transmit a hard reset request on the specified phy. The SCU + * hardware requires that we reset the OOB state machine and set the hard reset + * bit in the phy configuration register. We then must start OOB over with the + * hard reset bit set. + */ +static void scu_link_layer_tx_hard_reset( + struct scic_sds_phy *this_phy) +{ + u32 phy_configuration_value; + + /* + * SAS Phys must wait for the HARD_RESET_TX event notification to transition + * to the starting state. */ + phy_configuration_value = SCU_SAS_PCFG_READ(this_phy); + phy_configuration_value |= + (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); + SCU_SAS_PCFG_WRITE(this_phy, phy_configuration_value); + + /* Now take the OOB state machine out of reset */ + phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + SCU_SAS_PCFG_WRITE(this_phy, phy_configuration_value); +} + +/* + * **************************************************************************** + * * PHY BASE STATE METHODS + * **************************************************************************** */ + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state + * handlers for the phy object base state machine initial state. none + */ +static void scic_sds_phy_initial_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_STOPPED); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state + * handlers for the phy object base state machine initial state. - The SCU + * hardware is requested to stop the protocol engine. none + */ +static void scic_sds_phy_stopped_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + /* / @todo We need to get to the controller to place this PE in a reset state */ + + scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_STOPPED); + + scu_link_layer_stop_protocol_engine(this_phy); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state + * handlers for the phy object base state machine starting state. - The SCU + * hardware is requested to start OOB/SN on this protocl engine. - The phy + * starting substate machine is started. - If the previous state was the ready + * state then the struct scic_sds_controller is informed that the phy has gone link + * down. none + */ +static void scic_sds_phy_starting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_STARTING); + + scu_link_layer_stop_protocol_engine(this_phy); + scu_link_layer_start_oob(this_phy); + + /* We don't know what kind of phy we are going to be just yet */ + this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + this_phy->bcn_received_while_port_unassigned = false; + + /* Change over to the starting substate machine to continue */ + sci_base_state_machine_start(&this_phy->starting_substate_machine); + + if (this_phy->parent.state_machine.previous_state_id + == SCI_BASE_PHY_STATE_READY) { + scic_sds_controller_link_down( + scic_sds_phy_get_controller(this_phy), + scic_sds_phy_get_port(this_phy), + this_phy + ); + } +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state + * handlers for the phy object base state machine ready state. - The SCU + * hardware protocol engine is resumed. - The struct scic_sds_controller is informed + * that the phy object has gone link up. none + */ +static void scic_sds_phy_ready_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_READY); + + scic_sds_controller_link_up( + scic_sds_phy_get_controller(this_phy), + scic_sds_phy_get_port(this_phy), + this_phy + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware + * protocol engine represented by this struct scic_sds_phy object. none + */ +static void scic_sds_phy_ready_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_suspend(this_phy); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state + * handlers for the phy object base state machine resetting state. none + */ +static void scic_sds_phy_resetting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_RESETTING); + + /* + * The phy is being reset, therefore deactivate it from the port. + * In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + scic_sds_port_deactivate_phy(this_phy->owning_port, this_phy, false); + + if (this_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + scu_link_layer_tx_hard_reset(this_phy); + } else { + /* + * The SCU does not need to have a descrete reset state so just go back to + * the starting state. */ + sci_base_state_machine_change_state( + &this_phy->parent.state_machine, + SCI_BASE_PHY_STATE_STARTING + ); + } +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state + * handlers for the phy object base state machine final state. none + */ +static void scic_sds_phy_final_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_phy *this_phy; + + this_phy = (struct scic_sds_phy *)object; + + scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_FINAL); + + /* Nothing to do here */ +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_phy_state_table[] = { + [SCI_BASE_PHY_STATE_INITIAL] = { + .enter_state = scic_sds_phy_initial_state_enter, + }, + [SCI_BASE_PHY_STATE_STOPPED] = { + .enter_state = scic_sds_phy_stopped_state_enter, + }, + [SCI_BASE_PHY_STATE_STARTING] = { + .enter_state = scic_sds_phy_starting_state_enter, + }, + [SCI_BASE_PHY_STATE_READY] = { + .enter_state = scic_sds_phy_ready_state_enter, + .exit_state = scic_sds_phy_ready_state_exit, + }, + [SCI_BASE_PHY_STATE_RESETTING] = { + .enter_state = scic_sds_phy_resetting_state_enter, + }, + [SCI_BASE_PHY_STATE_FINAL] = { + .enter_state = scic_sds_phy_final_state_enter, + }, +}; + diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h new file mode 100644 index 0000000..d9691b3 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -0,0 +1,491 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_PHY_H_ +#define _SCIC_SDS_PHY_H_ + +/** + * This file contains the structures, constants and prototypes for the + * struct scic_sds_phy object. + * + * + */ + +#include "intel_sata.h" +#include "intel_sas.h" +#include "sci_base_phy.h" +#include "scu_registers.h" + +struct scic_sds_port; +/** + * + * + * This is the timeout value for the SATA phy to wait for a SIGNATURE FIS + * before restarting the starting state machine. Technically, the old parallel + * ATA specification required up to 30 seconds for a device to issue its + * signature FIS as a result of a soft reset. Now we see that devices respond + * generally within 15 seconds, but we'll use 25 for now. + */ +#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000 + +/** + * + * + * This is the timeout for the SATA OOB/SN because the hardware does not + * recognize a hot plug after OOB signal but before the SN signals. We need to + * make sure after a hotplug timeout if we have not received the speed event + * notification from the hardware that we restart the hardware OOB state + * machine. + */ +#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 + +/** + * enum SCIC_SDS_PHY_STARTING_SUBSTATES - + * + * + */ +enum SCIC_SDS_PHY_STARTING_SUBSTATES { + /** + * Initial state + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL, + + /** + * Wait state for the hardware OSSP event type notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN, + + /** + * Wait state for the PHY speed notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN, + + /** + * Wait state for the IAF Unsolicited frame notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF, + + /** + * Wait state for the request to consume power + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER, + + /** + * Wait state for request to consume power + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER, + + /** + * Wait state for the SATA PHY notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN, + + /** + * Wait for the SATA PHY speed notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN, + + /** + * Wait state for the SIGNATURE FIS unsolicited frame notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF, + + /** + * Exit state for this state machine + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL, + + /** + * Maximum number of substates for the STARTING state machine + */ + SCIC_SDS_PHY_STARTING_MAX_SUBSTATES +}; + +struct scic_sds_port; +struct scic_sds_controller; + +#ifdef SCIC_DEBUG_ENABLED +#define MAX_STATE_TRANSITION_RECORD (256) + +/** + * + * + * Debug code to record the state transitions for the phy object + */ +struct scic_sds_phy_state_record { + struct sci_base_observer base_state_observer; + struct sci_base_observer starting_state_observer; + + u16 index; + + u32 state_transition_table[MAX_STATE_TRANSITION_RECORD]; + +}; +#endif /* SCIC_DEBUG_ENABLED */ + +/** + * This enumeration provides a named phy type for the state machine + * + * + */ +enum SCIC_SDS_PHY_PROTOCOL { + /** + * This is an unknown phy type since there is either nothing on the other + * end or we have not detected the phy type as yet. + */ + SCIC_SDS_PHY_PROTOCOL_UNKNOWN, + + /** + * This is a SAS PHY + */ + SCIC_SDS_PHY_PROTOCOL_SAS, + + /** + * This is a SATA PHY + */ + SCIC_SDS_PHY_PROTOCOL_SATA, + + SCIC_SDS_MAX_PHY_PROTOCOLS +}; + +/** + * struct scic_sds_phy - This structure contains or references all of the data + * necessary to represent the core phy object and SCU harware protocol + * engine. + * + * + */ +struct scic_sds_phy { + struct sci_base_phy parent; + + /** + * This field specifies the port object that owns/contains this phy. + */ + struct scic_sds_port *owning_port; + + /** + * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s, + * or 6.0 Gb/s operation. + */ + enum sci_sas_link_rate max_negotiated_speed; + + /** + * This member specifies the protocol being utilized on this phy. This + * field contains a legitamite value once the PHY has link trained with + * a remote phy. + */ + enum SCIC_SDS_PHY_PROTOCOL protocol; + + /** + * This field specifies the index with which this phy is associated (0-3). + */ + u8 phy_index; + + /** + * This member indicates if this particular PHY has received a BCN while + * it had no port assignement. This BCN will be reported once the phy is + * assigned to a port. + */ + bool bcn_received_while_port_unassigned; + + /** + * This field indicates if this PHY is currently in the process of + * link training (i.e. it has started OOB, but has yet to perform + * IAF exchange/Signature FIS reception). + */ + bool is_in_link_training; + + union { + struct { + struct sci_sas_identify_address_frame identify_address_frame_buffer; + + } sas; + + struct { + struct sata_fis_reg_d2h signature_fis_buffer; + + } sata; + + } phy_type; + + /** + * This field contains a reference to the timer utilized in detecting + * when a signature FIS timeout has occurred. The signature FIS is the + * first FIS sent by an attached SATA device after OOB/SN. + */ + void *sata_timeout_timer; + + struct scic_sds_phy_state_handler *state_handlers; + + struct sci_base_state_machine starting_substate_machine; + + #ifdef SCIC_DEBUG_ENABLED + struct scic_sds_phy_state_record state_record; + #endif /* SCIC_DEBUG_ENABLED */ + + /** + * This field points to the link layer register set within the SCU. + */ + struct scu_link_layer_registers *link_layer_registers; + +}; + + +typedef enum sci_status (*SCIC_SDS_PHY_EVENT_HANDLER_T)(struct scic_sds_phy *, u32); +typedef enum sci_status (*SCIC_SDS_PHY_FRAME_HANDLER_T)(struct scic_sds_phy *, u32); +typedef enum sci_status (*SCIC_SDS_PHY_POWER_HANDLER_T)(struct scic_sds_phy *); + +/** + * struct scic_sds_phy_state_handler - + * + * + */ +struct scic_sds_phy_state_handler { + /** + * This is the struct sci_base_phy object state handlers. + */ + struct sci_base_phy_state_handler parent; + + /** + * The state handler for unsolicited frames received from the SCU hardware. + */ + SCIC_SDS_PHY_FRAME_HANDLER_T frame_handler; + + /** + * The state handler for events received from the SCU hardware. + */ + SCIC_SDS_PHY_EVENT_HANDLER_T event_handler; + + /** + * The state handler for staggered spinup. + */ + SCIC_SDS_PHY_POWER_HANDLER_T consume_power_handler; + +}; + +extern struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[]; +extern const struct sci_base_state scic_sds_phy_state_table[]; +extern const struct sci_base_state scic_sds_phy_starting_substates[]; +extern struct scic_sds_phy_state_handler + scic_sds_phy_starting_substate_handler_table[]; + + +/** + * scic_sds_phy_get_index() - + * + * This macro returns the phy index for the specified phy + */ +#define scic_sds_phy_get_index(phy) \ + ((phy)->phy_index) + +/** + * scic_sds_phy_get_controller() - This macro returns the controller for this + * phy + * + * + */ +#define scic_sds_phy_get_controller(phy) \ + (scic_sds_port_get_controller((phy)->owning_port)) + +/** + * scic_sds_phy_get_base_state_machine() - This macro returns the state machine + * for the base phy + * + * + */ +#define scic_sds_phy_get_base_state_machine(phy) \ + (&(phy)->parent.state_machine) + +/** + * scic_sds_phy_get_starting_substate_machine() - This macro returns the + * starting substate machine for this phy + * + * + */ +#define scic_sds_phy_get_starting_substate_machine(phy) \ + (&(phy)->starting_substate_machine) + +/** + * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for + * this phy object + * + * + */ +#define scic_sds_phy_set_state_handlers(phy, handlers) \ + ((phy)->state_handlers = (handlers)) + +/** + * scic_sds_phy_set_base_state_handlers() - + * + * This macro set the base state handlers for the phy object. + */ +#define scic_sds_phy_set_base_state_handlers(phy, state_id) \ + scic_sds_phy_set_state_handlers(\ + (phy), \ + &scic_sds_phy_state_handler_table[(state_id)] \ + ) + +/** + * scic_sds_phy_is_ready() - + * + * This macro returns true if the current base state for this phy is + * SCI_BASE_PHY_STATE_READY + */ +#define scic_sds_phy_is_ready(phy) \ + (\ + SCI_BASE_PHY_STATE_READY \ + == sci_base_state_machine_get_state(\ + scic_sds_phy_get_base_state_machine(phy) \ + ) \ + ) + +/* --------------------------------------------------------------------------- */ + + + + +/* --------------------------------------------------------------------------- */ + +void scic_sds_phy_construct( + struct scic_sds_phy *this_phy, + struct scic_sds_port *owning_port, + u8 phy_index); + +struct scic_sds_port *scic_sds_phy_get_port( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_set_port( + struct scic_sds_phy *this_phy, + struct scic_sds_port *owning_port); + +enum sci_status scic_sds_phy_initialize( + struct scic_sds_phy *this_phy, + struct scu_link_layer_registers *link_layer_registers); + +enum sci_status scic_sds_phy_start( + struct scic_sds_phy *this_phy); + +enum sci_status scic_sds_phy_stop( + struct scic_sds_phy *this_phy); + +enum sci_status scic_sds_phy_reset( + struct scic_sds_phy *this_phy); + +/* --------------------------------------------------------------------------- */ + +void scic_sds_phy_suspend( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_resume( + struct scic_sds_phy *this_phy); + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_sds_phy_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code); + +enum sci_status scic_sds_phy_frame_handler( + struct scic_sds_phy *this_phy, + u32 frame_index); + +enum sci_status scic_sds_phy_consume_power_handler( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_get_sas_address( + struct scic_sds_phy *this_phy, + struct sci_sas_address *sas_address); + +void scic_sds_phy_get_attached_sas_address( + struct scic_sds_phy *this_phy, + struct sci_sas_address *sas_address); + +void scic_sds_phy_get_protocols( + struct scic_sds_phy *this_phy, + struct sci_sas_identify_address_frame_protocols *protocols); + +void scic_sds_phy_get_attached_phy_protocols( + struct scic_sds_phy *this_phy, + struct sci_sas_identify_address_frame_protocols *protocols); + +/* + * ****************************************************************************- + * * SCIC SDS PHY Handler Methods + * ****************************************************************************- */ + +enum sci_status scic_sds_phy_default_start_handler( + struct sci_base_phy *phy); + +enum sci_status scic_sds_phy_default_stop_handler( + struct sci_base_phy *phy); + +enum sci_status scic_sds_phy_default_reset_handler( + struct sci_base_phy *phy); + +enum sci_status scic_sds_phy_default_destroy_handler( + struct sci_base_phy *phy); + +enum sci_status scic_sds_phy_default_frame_handler( + struct scic_sds_phy *phy, + u32 frame_index); + +enum sci_status scic_sds_phy_default_event_handler( + struct scic_sds_phy *phy, + u32 evnet_code); + +enum sci_status scic_sds_phy_default_consume_power_handler( + struct scic_sds_phy *phy); + +#endif /* _SCIC_SDS_PHY_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy_registers.h b/drivers/scsi/isci/core/scic_sds_phy_registers.h new file mode 100644 index 0000000..7883819 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_phy_registers.h @@ -0,0 +1,187 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_PHY_REGISTERS_H_ +#define _SCIC_SDS_PHY_REGISTERS_H_ + +/** + * This file contains the macros used by the phy object to read/write to the + * SCU link layer registers. + * + * + */ + +#include "scic_sds_controller.h" + +/* + * ***************************************************************************** + * * SCU LINK LAYER REGISTER OPERATIONS + * ***************************************************************************** */ + +/** + * scu_link_layer_register_read() - + * + * THis macro requests the SCU register write for the specified link layer + * register. + */ +#define scu_link_layer_register_read(phy, reg) \ + scu_register_read(\ + scic_sds_phy_get_controller(phy), \ + (phy)->link_layer_registers->reg \ + ) + +/** + * scu_link_layer_register_write() - + * + * This macro requests the SCU register read for the specified link layer + * register. + */ +#define scu_link_layer_register_write(phy, reg, value) \ + scu_register_write(\ + scic_sds_phy_get_controller(phy), \ + (phy)->link_layer_registers->reg, \ + (value) \ + ) + +/* + * ***************************************************************************** + * * SCU LINK LAYER REGISTERS + * ***************************************************************************** */ + +/* / This macro reads from the SAS Identify Frame PHY Identifier register */ +#define SCU_SAS_TIPID_READ(phy) \ + scu_link_layer_register_read(phy, identify_frame_phy_id) + +/* / This macro writes to the SAS Identify Frame PHY Identifier register */ +#define SCU_SAS_TIPID_WRITE(phy, value) \ + scu_link_layer_register_write(phy, identify_frame_phy_id, value) + +/* / This macro reads from the SAS Identification register */ +#define SCU_SAS_TIID_READ(phy) \ + scu_link_layer_register_read(phy, transmit_identification) + +/* / This macro writes to the SAS Identification register */ +#define SCU_SAS_TIID_WRITE(phy, value) \ + scu_link_layer_register_write(phy, transmit_identification, value) + +/* / This macro reads the SAS Device Name High register */ +#define SCU_SAS_TIDNH_READ(phy) \ + scu_link_layer_register_read(phy, sas_device_name_high) + +/* / This macro writes the SAS Device Name High register */ +#define SCU_SAS_TIDNH_WRITE(phy, value) \ + scu_link_layer_register_write(phy, sas_device_name_high, value) + +/* / This macro reads the SAS Device Name Low register */ +#define SCU_SAS_TIDNL_READ(phy) \ + scu_link_layer_register_read(phy, sas_device_name_low) + +/* / This macro writes the SAS Device Name Low register */ +#define SCU_SAS_TIDNL_WRITE(phy, value) \ + scu_link_layer_register_write(phy, sas_device_name_low, value) + +/* / This macro reads the Source SAS Address High register */ +#define SCU_SAS_TISSAH_READ(phy) \ + scu_link_layer_register_read(phy, source_sas_address_high) + +/* / This macro writes the Source SAS Address High register */ +#define SCU_SAS_TISSAH_WRITE(phy, value) \ + scu_link_layer_register_write(phy, source_sas_address_high, value) + +/* / This macro reads the Source SAS Address Low register */ +#define SCU_SAS_TISSAL_READ(phy) \ + scu_link_layer_register_read(phy, source_sas_address_low) + +/* / This macro writes the Source SAS Address Low register */ +#define SCU_SAS_TISSAL_WRITE(phy, value) \ + scu_link_layer_register_write(phy, source_sas_address_low, value) + +/* / This macro reads the PHY Configuration register */ +#define SCU_SAS_PCFG_READ(phy) \ + scu_link_layer_register_read(phy, phy_configuration); + +/* / This macro writes the PHY Configuration register */ +#define SCU_SAS_PCFG_WRITE(phy, value) \ + scu_link_layer_register_write(phy, phy_configuration, value) + +/* / This macro reads the PHY Enable Spinup register */ +#define SCU_SAS_ENSPINUP_READ(phy) \ + scu_link_layer_register_read(phy, notify_enable_spinup_control) + +/* / This macro writes the PHY Enable Spinup register */ +#define SCU_SAS_ENSPINUP_WRITE(phy, value) \ + scu_link_layer_register_write(phy, notify_enable_spinup_control, value) + +/* / This macro reads the PHY Capacity register */ +#define SCU_SAS_PHYCAP_READ(phy) \ + scu_link_layer_register_read(phy, phy_capabilities) + +/* / This macro writes the PHY Capacity register */ +#define SCU_SAS_PHYCAP_WRITE(phy, value) \ + scu_link_layer_register_write(phy, phy_capabilities, value) + +/* / This macro reads the Recieved PHY Capacity register */ +#define SCU_SAS_RECPHYCAP_READ(phy) \ + scu_link_layer_register_read(phy, receive_phycap) + +/* / This macro reads the link layer control register */ +#define SCU_SAS_LLCTL_READ(phy) \ + scu_link_layer_register_read(phy, link_layer_control); + +/* / This macro writes the link layer control register */ +#define SCU_SAS_LLCTL_WRITE(phy, value) \ + scu_link_layer_register_write(phy, link_layer_control, value); + +#endif /* _SCIC_SDS_PHY_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c new file mode 100644 index 0000000..1af3850 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -0,0 +1,2757 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "intel_sas.h" +#include "sci_base_port.h" +#include "scic_controller.h" +#include "scic_phy.h" +#include "scic_port.h" +#include "scic_sds_controller.h" +#include "scic_sds_phy.h" +#include "scic_sds_phy_registers.h" +#include "scic_sds_port.h" +#include "scic_sds_port_registers.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_remote_node_context.h" +#include "scic_sds_request.h" +#include "scic_user_callback.h" +#include "sci_environment.h" + + +static void scic_sds_port_invalid_link_up( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy); +static void scic_sds_port_timeout_handler( + void *port); +#define SCIC_SDS_PORT_MIN_TIMER_COUNT (SCI_MAX_PORTS) +#define SCIC_SDS_PORT_MAX_TIMER_COUNT (SCI_MAX_PORTS) + +#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) + +void sci_base_port_construct( + struct sci_base_port *base_port, + const struct sci_base_state *state_table) +{ + base_port->parent.private = NULL; + sci_base_state_machine_construct( + &base_port->state_machine, + &base_port->parent, + state_table, + SCI_BASE_PORT_STATE_STOPPED + ); + + sci_base_state_machine_start( + &base_port->state_machine + ); +} + +/** + * + * @this_port: This is the port object to which the phy is being assigned. + * @phy_index: This is the phy index that is being assigned to the port. + * + * This method will return a true value if the specified phy can be assigned to + * this port The following is a list of phys for each port that are allowed: - + * Port 0 - 3 2 1 0 - Port 1 - 1 - Port 2 - 3 2 - Port 3 - 3 This method + * doesn't preclude all configurations. It merely ensures that a phy is part + * of the allowable set of phy identifiers for that port. For example, one + * could assign phy 3 to port 0 and no other phys. Please refer to + * scic_sds_port_is_phy_mask_valid() for information regarding whether the + * phy_mask for a port can be supported. bool true if this is a valid phy + * assignment for the port false if this is not a valid phy assignment for the + * port + */ +bool scic_sds_port_is_valid_phy_assignment( + struct scic_sds_port *this_port, + u32 phy_index) +{ + /* Initialize to invalid value. */ + u32 existing_phy_index = SCI_MAX_PHYS; + u32 index; + + if ((this_port->physical_port_index == 1) && (phy_index != 1)) { + return false; + } + + if (this_port->physical_port_index == 3 && phy_index != 3) { + return false; + } + + if ( + (this_port->physical_port_index == 2) + && ((phy_index == 0) || (phy_index == 1)) + ) { + return false; + } + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if ((this_port->phy_table[index] != NULL) + && (index != phy_index)) { + existing_phy_index = index; + } + } + + /* + * Ensure that all of the phys in the port are capable of + * operating at the same maximum link rate. */ + if ( + (existing_phy_index < SCI_MAX_PHYS) + && (this_port->owning_controller->user_parameters.sds1.phys[ + phy_index].max_speed_generation != + this_port->owning_controller->user_parameters.sds1.phys[ + existing_phy_index].max_speed_generation) + ) + return false; + + return true; +} + +/** + * This method requests a list (mask) of the phys contained in the supplied SAS + * port. + * @this_port: a handle corresponding to the SAS port for which to return the + * phy mask. + * + * Return a bit mask indicating which phys are a part of this port. Each bit + * corresponds to a phy identifier (e.g. bit 0 = phy id 0). + */ +u32 scic_sds_port_get_phys(struct scic_sds_port *this_port) +{ + u32 index; + u32 mask; + + mask = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (this_port->phy_table[index] != NULL) { + mask |= (1 << index); + } + } + + return mask; +} + +/** + * + * @this_port: This is the port object for which to determine if the phy mask + * can be supported. + * + * This method will return a true value if the port's phy mask can be supported + * by the SCU. The following is a list of valid PHY mask configurations for + * each port: - Port 0 - [[3 2] 1] 0 - Port 1 - [1] - Port 2 - [[3] 2] + * - Port 3 - [3] This method returns a boolean indication specifying if the + * phy mask can be supported. true if this is a valid phy assignment for the + * port false if this is not a valid phy assignment for the port + */ +bool scic_sds_port_is_phy_mask_valid( + struct scic_sds_port *this_port, + u32 phy_mask) +{ + if (this_port->physical_port_index == 0) { + if (((phy_mask & 0x0F) == 0x0F) + || ((phy_mask & 0x03) == 0x03) + || ((phy_mask & 0x01) == 0x01) + || (phy_mask == 0)) + return true; + } else if (this_port->physical_port_index == 1) { + if (((phy_mask & 0x02) == 0x02) + || (phy_mask == 0)) + return true; + } else if (this_port->physical_port_index == 2) { + if (((phy_mask & 0x0C) == 0x0C) + || ((phy_mask & 0x04) == 0x04) + || (phy_mask == 0)) + return true; + } else if (this_port->physical_port_index == 3) { + if (((phy_mask & 0x08) == 0x08) + || (phy_mask == 0)) + return true; + } + + return false; +} + +/** + * + * @this_port: This parameter specifies the port from which to return a + * connected phy. + * + * This method retrieves a currently active (i.e. connected) phy contained in + * the port. Currently, the lowest order phy that is connected is returned. + * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is + * returned if there are no currently active (i.e. connected to a remote end + * point) phys contained in the port. All other values specify a struct scic_sds_phy + * object that is active in the port. + */ +static struct scic_sds_phy *scic_sds_port_get_a_connected_phy( + struct scic_sds_port *this_port + ) { + u32 index; + struct scic_sds_phy *phy; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* + * Ensure that the phy is both part of the port and currently + * connected to the remote end-point. */ + phy = this_port->phy_table[index]; + if ( + (phy != NULL) + && scic_sds_port_active_phy(this_port, phy) + ) { + return phy; + } + } + + return NULL; +} + +/** + * scic_sds_port_set_phy() - + * @out]: port The port object to which the phy assignement is being made. + * @out]: phy The phy which is being assigned to the port. + * + * This method attempts to make the assignment of the phy to the port. If + * successful the phy is assigned to the ports phy table. bool true if the phy + * assignment can be made. false if the phy assignement can not be made. This + * is a functional test that only fails if the phy is currently assigned to a + * different port. + */ +enum sci_status scic_sds_port_set_phy( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + /* + * Check to see if we can add this phy to a port + * that means that the phy is not part of a port and that the port does + * not already have a phy assinged to the phy index. */ + if ( + (port->phy_table[phy->phy_index] == SCI_INVALID_HANDLE) + && (scic_sds_phy_get_port(phy) == SCI_INVALID_HANDLE) + && scic_sds_port_is_valid_phy_assignment(port, phy->phy_index) + ) { + /* + * Phy is being added in the stopped state so we are in MPC mode + * make logical port index = physical port index */ + port->logical_port_index = port->physical_port_index; + port->phy_table[phy->phy_index] = phy; + scic_sds_phy_set_port(phy, port); + + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +/** + * scic_sds_port_clear_phy() - + * @out]: port The port from which the phy is being cleared. + * @out]: phy The phy being cleared from the port. + * + * This method will clear the phy assigned to this port. This method fails if + * this phy is not currently assinged to this port. bool true if the phy is + * removed from the port. false if this phy is not assined to this port. + */ +enum sci_status scic_sds_port_clear_phy( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + /* Make sure that this phy is part of this port */ + if ( + (port->phy_table[phy->phy_index] == phy) + && (scic_sds_phy_get_port(phy) == port) + ) { + /* Yep it is assigned to this port so remove it */ + scic_sds_phy_set_port( + phy, + &scic_sds_port_get_controller(port)->port_table[SCI_MAX_PORTS] + ); + + port->phy_table[phy->phy_index] = SCI_INVALID_HANDLE; + + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +/** + * scic_sds_port_add_phy() - + * @this_port: This parameter specifies the port in which the phy will be added. + * @the_phy: This parameter is the phy which is to be added to the port. + * + * This method will add a PHY to the selected port. This method returns an + * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other status + * is failre to add the phy to the port. + */ +enum sci_status scic_sds_port_add_phy( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + return this_port->state_handlers->parent.add_phy_handler( + &this_port->parent, &the_phy->parent); +} + + +/** + * scic_sds_port_remove_phy() - + * @this_port: This parameter specifies the port in which the phy will be added. + * @the_phy: This parameter is the phy which is to be added to the port. + * + * This method will remove the PHY from the selected PORT. This method returns + * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any other + * status is failre to add the phy to the port. + */ +enum sci_status scic_sds_port_remove_phy( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + return this_port->state_handlers->parent.remove_phy_handler( + &this_port->parent, &the_phy->parent); +} + +/** + * This method requests the SAS address for the supplied SAS port from the SCI + * implementation. + * @this_port: a handle corresponding to the SAS port for which to return the + * SAS address. + * @sas_address: This parameter specifies a pointer to a SAS address structure + * into which the core will copy the SAS address for the port. + * + */ +void scic_sds_port_get_sas_address( + struct scic_sds_port *this_port, + struct sci_sas_address *sas_address) +{ + u32 index; + + sas_address->high = 0; + sas_address->low = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (this_port->phy_table[index] != NULL) { + scic_sds_phy_get_sas_address(this_port->phy_table[index], sas_address); + } + } +} + +/** + * This method will indicate which protocols are supported by this port. + * @this_port: a handle corresponding to the SAS port for which to return the + * supported protocols. + * @protocols: This parameter specifies a pointer to an IAF protocol field + * structure into which the core will copy the protocol values for the port. + * The values are returned as part of a bit mask in order to allow for + * multi-protocol support. + * + */ +static void scic_sds_port_get_protocols( + struct scic_sds_port *this_port, + struct sci_sas_identify_address_frame_protocols *protocols) +{ + u8 index; + + protocols->u.all = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (this_port->phy_table[index] != NULL) { + scic_sds_phy_get_protocols(this_port->phy_table[index], protocols); + } + } +} + +/** + * This method requests the SAS address for the device directly attached to + * this SAS port. + * @this_port: a handle corresponding to the SAS port for which to return the + * SAS address. + * @sas_address: This parameter specifies a pointer to a SAS address structure + * into which the core will copy the SAS address for the device directly + * attached to the port. + * + */ +void scic_sds_port_get_attached_sas_address( + struct scic_sds_port *this_port, + struct sci_sas_address *sas_address) +{ + struct sci_sas_identify_address_frame_protocols protocols; + struct scic_sds_phy *phy; + + /* + * Ensure that the phy is both part of the port and currently + * connected to the remote end-point. */ + phy = scic_sds_port_get_a_connected_phy(this_port); + if (phy != NULL) { + scic_sds_phy_get_attached_phy_protocols(phy, &protocols); + + if (!protocols.u.bits.stp_target) { + scic_sds_phy_get_attached_sas_address(phy, sas_address); + } else { + scic_sds_phy_get_sas_address(phy, sas_address); + sas_address->low += phy->phy_index; + } + } else { + sas_address->high = 0; + sas_address->low = 0; + } +} + +/** + * This method will indicate which protocols are supported by this remote + * device. + * @this_port: a handle corresponding to the SAS port for which to return the + * supported protocols. + * @protocols: This parameter specifies a pointer to an IAF protocol field + * structure into which the core will copy the protocol values for the port. + * The values are returned as part of a bit mask in order to allow for + * multi-protocol support. + * + */ +void scic_sds_port_get_attached_protocols( + struct scic_sds_port *this_port, + struct sci_sas_identify_address_frame_protocols *protocols) +{ + struct scic_sds_phy *phy; + + /* + * Ensure that the phy is both part of the port and currently + * connected to the remote end-point. */ + phy = scic_sds_port_get_a_connected_phy(this_port); + if (phy != NULL) + scic_sds_phy_get_attached_phy_protocols(phy, protocols); + else + protocols->u.all = 0; +} + +/** + * This method returns the amount of memory requred for a port object. + * + * u32 + */ + +/** + * This method returns the minimum number of timers required for all port + * objects. + * + * u32 + */ + +/** + * This method returns the maximum number of timers required for all port + * objects. + * + * u32 + */ + +/** + * + * @this_port: + * @port_index: + * + * + */ +void scic_sds_port_construct( + struct scic_sds_port *this_port, + u8 port_index, + struct scic_sds_controller *owning_controller) +{ + u32 index; + + sci_base_port_construct( + &this_port->parent, + scic_sds_port_state_table + ); + + sci_base_state_machine_construct( + scic_sds_port_get_ready_substate_machine(this_port), + &this_port->parent.parent, + scic_sds_port_ready_substate_table, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING + ); + + this_port->logical_port_index = SCIC_SDS_DUMMY_PORT; + this_port->physical_port_index = port_index; + this_port->active_phy_mask = 0; + + this_port->owning_controller = owning_controller; + + this_port->started_request_count = 0; + this_port->assigned_device_count = 0; + + this_port->timer_handle = SCI_INVALID_HANDLE; + + this_port->transport_layer_registers = NULL; + this_port->port_task_scheduler_registers = NULL; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + this_port->phy_table[index] = NULL; + } +} + +/** + * This method performs initialization of the supplied port. Initialization + * includes: - state machine initialization - member variable initialization + * - configuring the phy_mask + * @this_port: + * @transport_layer_registers: + * @port_task_scheduler_registers: + * @port_configuration_regsiter: + * + * enum sci_status SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This value is returned + * if the phy being added to the port + */ +enum sci_status scic_sds_port_initialize( + struct scic_sds_port *this_port, + void *transport_layer_registers, + void *port_task_scheduler_registers, + void *port_configuration_regsiter, + void *viit_registers) +{ + u32 tl_control; + + this_port->transport_layer_registers = transport_layer_registers; + this_port->port_task_scheduler_registers = port_task_scheduler_registers; + this_port->port_pe_configuration_register = port_configuration_regsiter; + this_port->viit_registers = viit_registers; + + scic_sds_port_set_direct_attached_device_id( + this_port, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX + ); + + /* + * Hardware team recommends that we enable the STP prefetch + * for all ports */ + tl_control = SCU_TLCR_READ(this_port); + tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); + SCU_TLCR_WRITE(this_port, tl_control); + + /* + * If this is not the dummy port make the assignment of + * the timer and start the state machine */ + if (this_port->physical_port_index != SCI_MAX_PORTS) { + /* / @todo should we create the timer at create time? */ + this_port->timer_handle = scic_cb_timer_create( + scic_sds_port_get_controller(this_port), + scic_sds_port_timeout_handler, + this_port + ); + + } else { + /* + * Force the dummy port into a condition where it rejects all requests + * as its in an invalid state for any operation. + * / @todo should we set a set of specical handlers for the dummy port? */ + scic_sds_port_set_base_state_handlers( + this_port, SCI_BASE_PORT_STATE_STOPPED + ); + } + + return SCI_SUCCESS; +} + +/** + * + * @this_port: This is the struct scic_sds_port object for which has a phy that has + * gone link up. + * @the_phy: This is the struct scic_sds_phy object that has gone link up. + * @do_notify_user: This parameter specifies whether to inform the user (via + * scic_cb_port_link_up()) as to the fact that a new phy as become ready. + * + * This method is the a general link up handler for the struct scic_sds_port object. + * This function will determine if this struct scic_sds_phy can be assigned to this + * struct scic_sds_port object. If the struct scic_sds_phy object can is not a valid PHY for + * this port then the function will notify the SCIC_USER. A PHY can only be + * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in + * the same port. none + */ +void scic_sds_port_general_link_up_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy, + bool do_notify_user) +{ + struct sci_sas_address port_sas_address; + struct sci_sas_address phy_sas_address; + + scic_sds_port_get_attached_sas_address(this_port, &port_sas_address); + scic_sds_phy_get_attached_sas_address(the_phy, &phy_sas_address); + + /* + * If the SAS address of the new phy matches the SAS address of + * other phys in the port OR this is the first phy in the port, + * then activate the phy and allow it to be used for operations + * in this port. */ + if ( + ( + (phy_sas_address.high == port_sas_address.high) + && (phy_sas_address.low == port_sas_address.low) + ) + || (this_port->active_phy_mask == 0) + ) { + scic_sds_port_activate_phy(this_port, the_phy, do_notify_user); + + if (this_port->parent.state_machine.current_state_id + == SCI_BASE_PORT_STATE_RESETTING) { + sci_base_state_machine_change_state( + &this_port->parent.state_machine, SCI_BASE_PORT_STATE_READY + ); + } + } else { + scic_sds_port_invalid_link_up(this_port, the_phy); + } +} + + +enum sci_status scic_port_start(struct scic_sds_port *port) +{ + return port->state_handlers->parent.start_handler(&port->parent); +} + + +enum sci_status scic_port_stop(struct scic_sds_port *port) +{ + return port->state_handlers->parent.stop_handler(&port->parent); +} + + +enum sci_status scic_port_get_properties( + struct scic_sds_port *port, + struct scic_port_properties *prop) +{ + if ((port == SCI_INVALID_HANDLE) || + (port->logical_port_index == SCIC_SDS_DUMMY_PORT)) + return SCI_FAILURE_INVALID_PORT; + + prop->index = port->logical_port_index; + prop->phy_mask = scic_sds_port_get_phys(port); + scic_sds_port_get_sas_address(port, &prop->local.sas_address); + scic_sds_port_get_protocols(port, &prop->local.protocols); + scic_sds_port_get_attached_sas_address(port, &prop->remote.sas_address); + scic_sds_port_get_attached_protocols(port, &prop->remote.protocols); + + return SCI_SUCCESS; +} + + +enum sci_status scic_port_hard_reset( + struct scic_sds_port *port, + u32 reset_timeout) +{ + return port->state_handlers->parent.reset_handler( + &port->parent, reset_timeout); +} + +/** + * + * @this_port: The port for which the direct attached device id is to be + * assigned. + * + * This method assigns the direct attached device ID for this port. + */ +void scic_sds_port_set_direct_attached_device_id( + struct scic_sds_port *this_port, + u32 device_id) +{ + u32 tl_control; + + SCU_STPTLDARNI_WRITE(this_port, device_id); + + /* + * The read should guarntee that the first write gets posted + * before the next write */ + tl_control = SCU_TLCR_READ(this_port); + tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); + SCU_TLCR_WRITE(this_port, tl_control); +} + + +/** + * + * @this_port: This is the port on which the phy should be enabled. + * @the_phy: This is the specific phy which to enable. + * @do_notify_user: This parameter specifies whether to inform the user (via + * scic_cb_port_link_up()) as to the fact that a new phy as become ready. + * + * This method will activate the phy in the port. Activation includes: - adding + * the phy to the port - enabling the Protocol Engine in the silicon. - + * notifying the user that the link is up. none + */ +void scic_sds_port_activate_phy( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy, + bool do_notify_user) +{ + struct scic_sds_controller *controller; + struct sci_sas_identify_address_frame_protocols protocols; + + controller = scic_sds_port_get_controller(this_port); + scic_sds_phy_get_attached_phy_protocols(the_phy, &protocols); + + /* If this is sata port then the phy has already been resumed */ + if (!protocols.u.bits.stp_target) { + scic_sds_phy_resume(the_phy); + } + + this_port->active_phy_mask |= 1 << the_phy->phy_index; + + scic_sds_controller_clear_invalid_phy(controller, the_phy); + + if (do_notify_user == true) + scic_cb_port_link_up(this_port->owning_controller, this_port, the_phy); +} + +/** + * + * @this_port: This is the port on which the phy should be deactivated. + * @the_phy: This is the specific phy that is no longer active in the port. + * @do_notify_user: This parameter specifies whether to inform the user (via + * scic_cb_port_link_down()) as to the fact that a new phy as become ready. + * + * This method will deactivate the supplied phy in the port. none + */ +void scic_sds_port_deactivate_phy( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy, + bool do_notify_user) +{ + this_port->active_phy_mask &= ~(1 << the_phy->phy_index); + + the_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; + + /* Re-assign the phy back to the LP as if it were a narrow port */ + SCU_PCSPExCR_WRITE(this_port, the_phy->phy_index, the_phy->phy_index); + + if (do_notify_user == true) + scic_cb_port_link_down(this_port->owning_controller, this_port, the_phy); +} + +/** + * + * @this_port: This is the port on which the phy should be disabled. + * @the_phy: This is the specific phy which to disabled. + * + * This method will disable the phy and report that the phy is not valid for + * this port object. None + */ +static void scic_sds_port_invalid_link_up( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + struct scic_sds_controller *controller = scic_sds_port_get_controller(this_port); + + /* + * Check to see if we have alreay reported this link as bad and if not go + * ahead and tell the SCI_USER that we have discovered an invalid link. */ + if ((controller->invalid_phy_mask & (1 << the_phy->phy_index)) == 0) { + scic_sds_controller_set_invalid_phy(controller, the_phy); + + scic_cb_port_invalid_link_up(controller, this_port, the_phy); + } +} + +/** + * This method returns false if the port only has a single phy object assigned. + * If there are no phys or more than one phy then the method will return + * true. + * @this_port: The port for which the wide port condition is to be checked. + * + * bool true Is returned if this is a wide ported port. false Is returned if + * this is a narrow port. + */ +static bool scic_sds_port_is_wide(struct scic_sds_port *this_port) +{ + u32 index; + u32 phy_count = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (this_port->phy_table[index] != NULL) { + phy_count++; + } + } + + return phy_count != 1; +} + +/** + * This method is called by the PHY object when the link is detected. if the + * port wants the PHY to continue on to the link up state then the port + * layer must return true. If the port object returns false the phy object + * must halt its attempt to go link up. + * @this_port: The port associated with the phy object. + * @the_phy: The phy object that is trying to go link up. + * + * true if the phy object can continue to the link up condition. true Is + * returned if this phy can continue to the ready state. false Is returned if + * can not continue on to the ready state. This notification is in place for + * wide ports and direct attached phys. Since there are no wide ported SATA + * devices this could become an invalid port configuration. + */ +bool scic_sds_port_link_detected( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + struct sci_sas_identify_address_frame_protocols protocols; + + scic_sds_phy_get_attached_phy_protocols(the_phy, &protocols); + + if ( + (this_port->logical_port_index != SCIC_SDS_DUMMY_PORT) + && (protocols.u.bits.stp_target) + && scic_sds_port_is_wide(this_port) + ) { + scic_sds_port_invalid_link_up(this_port, the_phy); + + return false; + } + + return true; +} + +/** + * This method is the entry point for the phy to inform the port that it is now + * in a ready state + * @this_port: + * + * + */ +void scic_sds_port_link_up( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + the_phy->is_in_link_training = false; + + this_port->state_handlers->link_up_handler(this_port, the_phy); +} + +/** + * This method is the entry point for the phy to inform the port that it is no + * longer in a ready state + * @this_port: + * + * + */ +void scic_sds_port_link_down( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + this_port->state_handlers->link_down_handler(this_port, the_phy); +} + +/** + * This method is called to start an IO request on this port. + * @this_port: + * @the_device: + * @the_io_request: + * + * enum sci_status + */ +enum sci_status scic_sds_port_start_io( + struct scic_sds_port *this_port, + struct scic_sds_remote_device *the_device, + struct scic_sds_request *the_io_request) +{ + return this_port->state_handlers->start_io_handler( + this_port, the_device, the_io_request); +} + +/** + * This method is called to complete an IO request to the port. + * @this_port: + * @the_device: + * @the_io_request: + * + * enum sci_status + */ +enum sci_status scic_sds_port_complete_io( + struct scic_sds_port *this_port, + struct scic_sds_remote_device *the_device, + struct scic_sds_request *the_io_request) +{ + return this_port->state_handlers->complete_io_handler( + this_port, the_device, the_io_request); +} + +/** + * This method is provided to timeout requests for port operations. Mostly its + * for the port reset operation. + * + * + */ +static void scic_sds_port_timeout_handler(void *port) +{ + struct scic_sds_port *this_port = port; + u32 current_state; + + current_state = sci_base_state_machine_get_state( + &this_port->parent.state_machine); + + if (current_state == SCI_BASE_PORT_STATE_RESETTING) { + /* + * if the port is still in the resetting state then the timeout fired + * before the reset completed. */ + sci_base_state_machine_change_state( + &this_port->parent.state_machine, + SCI_BASE_PORT_STATE_FAILED + ); + } else if (current_state == SCI_BASE_PORT_STATE_STOPPED) { + /* + * if the port is stopped then the start request failed + * In this case stay in the stopped state. */ + dev_err(sciport_to_dev(this_port), + "%s: SCIC Port 0x%p failed to stop before tiemout.\n", + __func__, + this_port); + } else if (current_state == SCI_BASE_PORT_STATE_STOPPING) { + /* if the port is still stopping then the stop has not completed */ + scic_cb_port_stop_complete( + scic_sds_port_get_controller(this_port), + port, + SCI_FAILURE_TIMEOUT + ); + } else { + /* + * The port is in the ready state and we have a timer reporting a timeout + * this should not happen. */ + dev_err(sciport_to_dev(this_port), + "%s: SCIC Port 0x%p is processing a timeout operation " + "in state %d.\n", + __func__, + this_port, + current_state); + } +} + +/* --------------------------------------------------------------------------- */ + +#ifdef SCIC_DEBUG_ENABLED +void scic_sds_port_decrement_request_count(struct scic_sds_port *this_port) +{ + if (this_port->started_request_count == 0) + dev_warn(sciport_to_dev(this_port), + __func__, + "%s: SCIC Port object requested to decrement started " + "io count past zero.\n"); + else + this_port->started_request_count--; +} +#endif + +/** + * This function updates the hardwares VIIT entry for this port. + * + * + */ +void scic_sds_port_update_viit_entry(struct scic_sds_port *this_port) +{ + struct sci_sas_address sas_address; + + scic_sds_port_get_sas_address(this_port, &sas_address); + + scu_port_viit_register_write( + this_port, initiator_sas_address_hi, sas_address.high); + + scu_port_viit_register_write( + this_port, initiator_sas_address_lo, sas_address.low); + + /* This value get cleared just in case its not already cleared */ + scu_port_viit_register_write( + this_port, reserved, 0); + + /* We are required to update the status register last */ + scu_port_viit_register_write( + this_port, status, ( + SCU_VIIT_ENTRY_ID_VIIT + | SCU_VIIT_IPPT_INITIATOR + | ((1 << this_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) + | SCU_VIIT_STATUS_ALL_VALID + ) + ); +} + +/** + * This method returns the maximum allowed speed for data transfers on this + * port. This maximum allowed speed evaluates to the maximum speed of the + * slowest phy in the port. + * @this_port: This parameter specifies the port for which to retrieve the + * maximum allowed speed. + * + * This method returns the maximum negotiated speed of the slowest phy in the + * port. + */ +enum sci_sas_link_rate scic_sds_port_get_max_allowed_speed( + struct scic_sds_port *this_port) +{ + u16 index = 0; + enum sci_sas_link_rate max_allowed_speed = SCI_SAS_600_GB; + struct scic_sds_phy *phy = NULL; + + /* + * Loop through all of the phys in this port and find the phy with the + * lowest maximum link rate. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy = this_port->phy_table[index]; + if ( + (phy != NULL) + && (scic_sds_port_active_phy(this_port, phy) == true) + && (phy->max_negotiated_speed < max_allowed_speed) + ) + max_allowed_speed = phy->max_negotiated_speed; + } + + return max_allowed_speed; +} + + +/** + * This method passes the event to core user. + * @this_port: The port that a BCN happens. + * @this_phy: The phy that receives BCN. + * + */ +void scic_sds_port_broadcast_change_received( + struct scic_sds_port *this_port, + struct scic_sds_phy *this_phy) +{ + /* notify the user. */ + scic_cb_port_bc_change_primitive_received( + this_port->owning_controller, this_port, this_phy + ); +} + + +/** + * This API methhod enables the broadcast change notification from underneath + * hardware. + * @this_port: The port that a BCN had been disabled from. + * + */ +void scic_port_enable_broadcast_change_notification( + struct scic_sds_port *port) +{ + struct scic_sds_phy *phy; + u32 register_value; + u8 index; + + /* Loop through all of the phys to enable BCN. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy = port->phy_table[index]; + if (phy != NULL) { + register_value = SCU_SAS_LLCTL_READ(phy); + + /* clear the bit by writing 1. */ + SCU_SAS_LLCTL_WRITE(phy, register_value); + } + } +} + +/* + * **************************************************************************** + * * READY SUBSTATE HANDLERS + * **************************************************************************** */ + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This method is the general ready state stop handler for the struct scic_sds_port + * object. This function will transition the ready substate machine to its + * final state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_ready_substate_stop_handler( + struct sci_base_port *port) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + + sci_base_state_machine_change_state( + &this_port->parent.state_machine, + SCI_BASE_PORT_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * @device: This is the struct sci_base_remote_device object which is not used in this + * function. + * @io_request: This is the struct sci_base_request object which is not used in this + * function. + * + * This method is the general ready substate complete io handler for the + * struct scic_sds_port object. This function decrments the outstanding request count + * for this port object. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_ready_substate_complete_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + + scic_sds_port_decrement_request_count(this_port); + + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_port_ready_substate_add_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; + enum sci_status status; + + status = scic_sds_port_set_phy(this_port, this_phy); + + if (status == SCI_SUCCESS) { + scic_sds_port_general_link_up_handler(this_port, this_phy, true); + + this_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + + sci_base_state_machine_change_state( + &this_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + } + + return status; +} + + +static enum sci_status scic_sds_port_ready_substate_remove_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; + enum sci_status status; + + status = scic_sds_port_clear_phy(this_port, this_phy); + + if (status == SCI_SUCCESS) { + scic_sds_port_deactivate_phy(this_port, this_phy, true); + + this_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + + sci_base_state_machine_change_state( + &this_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + } + + return status; +} + +/* + * **************************************************************************** + * * READY SUBSTATE WAITING HANDLERS + * **************************************************************************** */ + +/** + * + * @this_port: This is the struct scic_sds_port object that which has a phy that has + * gone link up. + * @the_phy: This is the struct scic_sds_phy object that has gone link up. + * + * This method is the ready waiting substate link up handler for the + * struct scic_sds_port object. This methos will report the link up condition for + * this port and will transition to the ready operational substate. none + */ +static void scic_sds_port_ready_waiting_substate_link_up_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + /* + * Since this is the first phy going link up for the port we can just enable + * it and continue. */ + scic_sds_port_activate_phy(this_port, the_phy, true); + + sci_base_state_machine_change_state( + &this_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL + ); +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * @device: This is the struct sci_base_remote_device object which is not used in this + * request. + * @io_request: This is the struct sci_base_request object which is not used in this + * function. + * + * This method is the ready waiting substate start io handler for the + * struct scic_sds_port object. The port object can not accept new requests so the + * request is failed. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + return SCI_FAILURE_INVALID_STATE; +} + +/* + * **************************************************************************** + * * READY SUBSTATE OPERATIONAL HANDLERS + * **************************************************************************** */ + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * @timeout: This is the timeout for the reset request to complete. + * + * This method will casue the port to reset. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_ready_operational_substate_reset_handler( + struct sci_base_port *port, + u32 timeout) +{ + enum sci_status status = SCI_FAILURE_INVALID_PHY; + u32 phy_index; + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + struct scic_sds_phy *selected_phy = SCI_INVALID_HANDLE; + + + /* Select a phy on which we can send the hard reset request. */ + for ( + phy_index = 0; + (phy_index < SCI_MAX_PHYS) + && (selected_phy == SCI_INVALID_HANDLE); + phy_index++ + ) { + selected_phy = this_port->phy_table[phy_index]; + + if ( + (selected_phy != SCI_INVALID_HANDLE) + && !scic_sds_port_active_phy(this_port, selected_phy) + ) { + /* We found a phy but it is not ready select different phy */ + selected_phy = SCI_INVALID_HANDLE; + } + } + + /* If we have a phy then go ahead and start the reset procedure */ + if (selected_phy != SCI_INVALID_HANDLE) { + status = scic_sds_phy_reset(selected_phy); + + if (status == SCI_SUCCESS) { + scic_cb_timer_start( + scic_sds_port_get_controller(this_port), + this_port->timer_handle, + timeout + ); + + this_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; + + sci_base_state_machine_change_state( + &this_port->parent.state_machine, + SCI_BASE_PORT_STATE_RESETTING + ); + } + } + + return status; +} + +/** + * scic_sds_port_ready_operational_substate_link_up_handler() - + * @this_port: This is the struct scic_sds_port object that which has a phy that has + * gone link up. + * @the_phy: This is the struct scic_sds_phy object that has gone link up. + * + * This method is the ready operational substate link up handler for the + * struct scic_sds_port object. This function notifies the SCI User that the phy has + * gone link up. none + */ +static void scic_sds_port_ready_operational_substate_link_up_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + scic_sds_port_general_link_up_handler(this_port, the_phy, true); +} + +/** + * scic_sds_port_ready_operational_substate_link_down_handler() - + * @this_port: This is the struct scic_sds_port object that which has a phy that has + * gone link down. + * @the_phy: This is the struct scic_sds_phy object that has gone link down. + * + * This method is the ready operational substate link down handler for the + * struct scic_sds_port object. This function notifies the SCI User that the phy has + * gone link down and if this is the last phy in the port the port will change + * state to the ready waiting substate. none + */ +static void scic_sds_port_ready_operational_substate_link_down_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy) +{ + scic_sds_port_deactivate_phy(this_port, the_phy, true); + + /* + * If there are no active phys left in the port, then transition + * the port to the WAITING state until such time as a phy goes + * link up. */ + if (this_port->active_phy_mask == 0) { + sci_base_state_machine_change_state( + scic_sds_port_get_ready_substate_machine(this_port), + SCIC_SDS_PORT_READY_SUBSTATE_WAITING + ); + } +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * @device: This is the struct sci_base_remote_device object which is not used in this + * function. + * @io_request: This is the struct sci_base_request object which is not used in this + * function. + * + * This method is the ready operational substate start io handler for the + * struct scic_sds_port object. This function incremetns the outstanding request + * count for this port object. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + + scic_sds_port_increment_request_count(this_port); + + return SCI_SUCCESS; +} + +/* + * **************************************************************************** + * * READY SUBSTATE OPERATIONAL HANDLERS + * **************************************************************************** */ + +/** + * scic_sds_port_ready_configuring_substate_add_phy_handler() - + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port add phy request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; + enum sci_status status; + + status = scic_sds_port_set_phy(this_port, this_phy); + + if (status == SCI_SUCCESS) { + scic_sds_port_general_link_up_handler(this_port, this_phy, true); + + /* + * Re-enter the configuring state since this may be the last phy in + * the port. */ + sci_base_state_machine_change_state( + &this_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + } + + return status; +} + +/** + * scic_sds_port_ready_configuring_substate_remove_phy_handler() - + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port remove phy request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; + enum sci_status status; + + status = scic_sds_port_clear_phy(this_port, this_phy); + + if (status == SCI_SUCCESS) { + scic_sds_port_deactivate_phy(this_port, this_phy, true); + + /* + * Re-enter the configuring state since this may be the last phy in + * the port. */ + sci_base_state_machine_change_state( + &this_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + } + + return status; +} + +/** + * scic_sds_port_ready_configuring_substate_complete_io_handler() - + * @port: This is the port that is being requested to complete the io request. + * @device: This is the device on which the io is completing. + * + * This method will decrement the outstanding request count for this port. If + * the request count goes to 0 then the port can be reprogrammed with its new + * phy data. + */ +static enum sci_status scic_sds_port_ready_configuring_substate_complete_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + scic_sds_port_decrement_request_count(port); + + if (port->started_request_count == 0) { + sci_base_state_machine_change_state( + &port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL + ); + } + + return SCI_SUCCESS; +} + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_port_state_handler +scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = +{ + /* SCIC_SDS_PORT_READY_SUBSTATE_WAITING */ + { + { + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_ready_substate_add_phy_handler, + scic_sds_port_default_remove_phy_handler + }, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_ready_waiting_substate_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_ready_waiting_substate_start_io_handler, + scic_sds_port_ready_substate_complete_io_handler, + }, + /* SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL */ + { + { + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_ready_operational_substate_reset_handler, + scic_sds_port_ready_substate_add_phy_handler, + scic_sds_port_ready_substate_remove_phy_handler + }, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_ready_operational_substate_link_up_handler, + scic_sds_port_ready_operational_substate_link_down_handler, + scic_sds_port_ready_operational_substate_start_io_handler, + scic_sds_port_ready_substate_complete_io_handler + }, + /* SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING */ + { + { + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_ready_configuring_substate_add_phy_handler, + scic_sds_port_ready_configuring_substate_remove_phy_handler + }, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_ready_configuring_substate_complete_io_handler + } +}; + + +/** + * scic_sds_port_set_ready_state_handlers() - + * + * This macro sets the port ready substate handlers. + */ +#define scic_sds_port_set_ready_state_handlers(port, state_id) \ + scic_sds_port_set_state_handlers(\ + port, &scic_sds_port_ready_substate_handler_table[(state_id)] \ + ) + +/* + * ****************************************************************************** + * * PORT STATE PRIVATE METHODS + * ****************************************************************************** */ + +/** + * + * @this_port: This is the struct scic_sds_port object to suspend. + * + * This method will susped the port task scheduler for this port object. none + */ +static void scic_sds_port_suspend_port_task_scheduler( + struct scic_sds_port *this_port) +{ + u32 pts_control_value; + u32 tl_control_value; + + pts_control_value = scu_port_task_scheduler_read(this_port, control); + tl_control_value = scu_transport_layer_read(this_port, control); + + pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); + tl_control_value |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); + + scu_port_task_scheduler_write(this_port, control, pts_control_value); + scu_transport_layer_write(this_port, control, tl_control_value); +} + +/** + * + * @this_port: This is the struct scic_sds_port object to resume. + * + * This method will resume the port task scheduler for this port object. none + */ +static void scic_sds_port_resume_port_task_scheduler( + struct scic_sds_port *this_port) +{ + u32 pts_control_value; + + pts_control_value = scu_port_task_scheduler_read(this_port, control); + + pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND); + + scu_port_task_scheduler_write(this_port, control, pts_control_value); +} + +/* + * ****************************************************************************** + * * PORT READY SUBSTATE METHODS + * ****************************************************************************** */ + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCIC_SDS_PORT_READY_SUBSTATE_WAITING. This function checks the + * port for any ready phys. If there is at least one phy in a ready state then + * the port transitions to the ready operational substate. none + */ +static void scic_sds_port_ready_substate_waiting_enter( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)object; + + scic_sds_port_set_ready_state_handlers( + this_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING + ); + + scic_sds_port_suspend_port_task_scheduler(this_port); + + this_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; + + if (this_port->active_phy_mask != 0) { + /* At least one of the phys on the port is ready */ + sci_base_state_machine_change_state( + &this_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL + ); + } +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets + * the state handlers for the port object, notifies the SCI User that the port + * is ready, and resumes port operations. none + */ +static void scic_sds_port_ready_substate_operational_enter( + struct sci_base_object *object) +{ + u32 index; + struct scic_sds_port *this_port = (struct scic_sds_port *)object; + + scic_sds_port_set_ready_state_handlers( + this_port, SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL + ); + + scic_cb_port_ready( + scic_sds_port_get_controller(this_port), this_port + ); + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (this_port->phy_table[index] != NULL) { + scic_sds_port_write_phy_assignment( + this_port, this_port->phy_table[index] + ); + } + } + + scic_sds_port_update_viit_entry(this_port); + + scic_sds_port_resume_port_task_scheduler(this_port); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports + * the port not ready and suspends the port task scheduler. none + */ +static void scic_sds_port_ready_substate_operational_exit( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)object; + + scic_cb_port_not_ready( + scic_sds_port_get_controller(this_port), + this_port, + this_port->not_ready_reason + ); +} + +/* + * ****************************************************************************** + * * PORT READY CONFIGURING METHODS + * ****************************************************************************** */ + +/** + * scic_sds_port_ready_substate_configuring_enter() - + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports + * the port not ready and suspends the port task scheduler. none + */ +static void scic_sds_port_ready_substate_configuring_enter( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)object; + + scic_sds_port_set_ready_state_handlers( + this_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + + if (this_port->active_phy_mask == 0) { + scic_cb_port_not_ready( + scic_sds_port_get_controller(this_port), + this_port, + SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS + ); + + sci_base_state_machine_change_state( + &this_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING + ); + } else if (this_port->started_request_count == 0) { + sci_base_state_machine_change_state( + &this_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL + ); + } +} + +static void scic_sds_port_ready_substate_configuring_exit( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)object; + + scic_sds_port_suspend_port_task_scheduler(this_port); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_port_ready_substate_table[] = { + [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { + .enter_state = scic_sds_port_ready_substate_waiting_enter, + }, + [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { + .enter_state = scic_sds_port_ready_substate_operational_enter, + .exit_state = scic_sds_port_ready_substate_operational_exit + }, + [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { + .enter_state = scic_sds_port_ready_substate_configuring_enter, + .exit_state = scic_sds_port_ready_substate_configuring_exit + }, +}; + +/* + * *************************************************************************** + * * DEFAULT HANDLERS + * *************************************************************************** */ + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for port a start request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_port_default_start_handler( + struct sci_base_port *port) +{ + struct scic_sds_port *sci_port = (struct scic_sds_port *)port; + + dev_warn(sciport_to_dev(sci_port), + "%s: SCIC Port 0x%p requested to start while in invalid " + "state %d\n", + __func__, + port, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine( + (struct scic_sds_port *)port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port stop request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_default_stop_handler( + struct sci_base_port *port) +{ + struct scic_sds_port *sci_port = (struct scic_sds_port *)port; + + dev_warn(sciport_to_dev(sci_port), + "%s: SCIC Port 0x%p requested to stop while in invalid " + "state %d\n", + __func__, + port, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine( + (struct scic_sds_port *)port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port destruct request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_port_default_destruct_handler( + struct sci_base_port *port) +{ + struct scic_sds_port *sci_port = (struct scic_sds_port *)port; + + dev_warn(sciport_to_dev(sci_port), + "%s: SCIC Port 0x%p requested to destruct while in invalid " + "state %d\n", + __func__, + port, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine( + (struct scic_sds_port *)port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * @timeout: This is the timeout for the reset request to complete. + * + * This is the default method for a port reset request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_port_default_reset_handler( + struct sci_base_port *port, + u32 timeout) +{ + struct scic_sds_port *sci_port = (struct scic_sds_port *)port; + + dev_warn(sciport_to_dev(sci_port), + "%s: SCIC Port 0x%p requested to reset while in invalid " + "state %d\n", + __func__, + port, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine( + (struct scic_sds_port *)port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port add phy request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_default_add_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy) +{ + struct scic_sds_port *sci_port = (struct scic_sds_port *)port; + + dev_warn(sciport_to_dev(sci_port), + "%s: SCIC Port 0x%p requested to add phy 0x%p while in " + "invalid state %d\n", + __func__, + port, + phy, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine( + (struct scic_sds_port *)port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port remove phy request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_port_default_remove_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy) +{ + struct scic_sds_port *sci_port = (struct scic_sds_port *)port; + + dev_warn(sciport_to_dev(sci_port), + "%s: SCIC Port 0x%p requested to remove phy 0x%p while in " + "invalid state %d\n", + __func__, + port, + phy, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine( + (struct scic_sds_port *)port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port unsolicited frame request. It will + * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even + * possible to receive an unsolicited frame directed to a port object? It + * seems possible if we implementing virtual functions but until then? + */ +enum sci_status scic_sds_port_default_frame_handler( + struct scic_sds_port *port, + u32 frame_index) +{ + dev_warn(sciport_to_dev(port), + "%s: SCIC Port 0x%p requested to process frame %d while in " + "invalid state %d\n", + __func__, + port, + frame_index, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine(port))); + + scic_sds_controller_release_frame( + scic_sds_port_get_controller(port), frame_index + ); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port event request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_port_default_event_handler( + struct scic_sds_port *port, + u32 event_code) +{ + dev_warn(sciport_to_dev(port), + "%s: SCIC Port 0x%p requested to process event 0x%x while " + "in invalid state %d\n", + __func__, + port, + event_code, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine( + (struct scic_sds_port *)port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port link up notification. It will report + * a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +void scic_sds_port_default_link_up_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy) +{ + dev_warn(sciport_to_dev(this_port), + "%s: SCIC Port 0x%p received link_up notification from phy " + "0x%p while in invalid state %d\n", + __func__, + this_port, + phy, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine(this_port))); +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port link down notification. It will + * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +void scic_sds_port_default_link_down_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy) +{ + dev_warn(sciport_to_dev(this_port), + "%s: SCIC Port 0x%p received link down notification from " + "phy 0x%p while in invalid state %d\n", + __func__, + this_port, + phy, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine(this_port))); +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port start io request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_port_default_start_io_handler( + struct scic_sds_port *this_port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + dev_warn(sciport_to_dev(this_port), + "%s: SCIC Port 0x%p requested to start io request 0x%p " + "while in invalid state %d\n", + __func__, + this_port, + io_request, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine(this_port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port complete io request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_default_complete_io_handler( + struct scic_sds_port *this_port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + dev_warn(sciport_to_dev(this_port), + "%s: SCIC Port 0x%p requested to complete io request 0x%p " + "while in invalid state %d\n", + __func__, + this_port, + io_request, + sci_base_state_machine_get_state( + scic_sds_port_get_base_state_machine(this_port))); + + return SCI_FAILURE_INVALID_STATE; +} + +/* + * **************************************************************************** + * * GENERAL STATE HANDLERS + * **************************************************************************** */ + +/** + * + * @port: This is the struct scic_sds_port object on which the io request count will + * be decremented. + * @device: This is the struct scic_sds_remote_device object to which the io request + * is being directed. This parameter is not required to complete this + * operation. + * @io_request: This is the request that is being completed on this port + * object. This parameter is not required to complete this operation. + * + * This is a general complete io request handler for the struct scic_sds_port object. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_general_complete_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + + scic_sds_port_decrement_request_count(this_port); + + return SCI_SUCCESS; +} + +/* + * **************************************************************************** + * * STOPPED STATE HANDLERS + * **************************************************************************** */ + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This method takes the struct scic_sds_port from a stopped state and attempts to + * start it. To start a port it must have no assiged devices and it must have + * at least one phy assigned to it. If those conditions are met then the port + * can transition to the ready state. enum sci_status + * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This struct scic_sds_port object could + * not be started because the port configuration is not valid. SCI_SUCCESS the + * start request is successful and the struct scic_sds_port object has transitioned to + * the SCI_BASE_PORT_STATE_READY. + */ +static enum sci_status scic_sds_port_stopped_state_start_handler( + struct sci_base_port *port) +{ + u32 phy_mask; + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + + if (this_port->assigned_device_count > 0) { + /* + * / @todo This is a start failure operation because there are still + * / devices assigned to this port. There must be no devices + * / assigned to a port on a start operation. */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + phy_mask = scic_sds_port_get_phys(this_port); + + /* + * There are one or more phys assigned to this port. Make sure + * the port's phy mask is in fact legal and supported by the + * silicon. */ + if (scic_sds_port_is_phy_mask_valid(this_port, phy_mask) == true) { + sci_base_state_machine_change_state( + scic_sds_port_get_base_state_machine(this_port), + SCI_BASE_PORT_STATE_READY + ); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This method takes the struct scic_sds_port that is in a stopped state and handles a + * stop request. This function takes no action. enum sci_status SCI_SUCCESS the + * stop request is successful as the struct scic_sds_port object is already stopped. + */ +static enum sci_status scic_sds_port_stopped_state_stop_handler( + struct sci_base_port *port) +{ + /* We are already stopped so there is nothing to do here */ + return SCI_SUCCESS; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This method takes the struct scic_sds_port that is in a stopped state and handles + * the destruct request. The stopped state is the only state in which the + * struct scic_sds_port can be destroyed. This function causes the port object to + * transition to the SCI_BASE_PORT_STATE_FINAL. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_stopped_state_destruct_handler( + struct sci_base_port *port) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + + sci_base_state_machine_stop(&this_port->parent.state_machine); + + return SCI_SUCCESS; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This method takes the struct scic_sds_port that is in a stopped state and handles + * the add phy request. In MPC mode the only time a phy can be added to a port + * is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status + * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not + * be added to the port. SCI_SUCCESS if the phy is added to the port. + */ +static enum sci_status scic_sds_port_stopped_state_add_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; + struct sci_sas_address port_sas_address; + + /* Read the port assigned SAS Address if there is one */ + scic_sds_port_get_sas_address(this_port, &port_sas_address); + + if (port_sas_address.high != 0 && port_sas_address.low != 0) { + struct sci_sas_address phy_sas_address; + + /* + * Make sure that the PHY SAS Address matches the SAS Address + * for this port. */ + scic_sds_phy_get_sas_address(this_phy, &phy_sas_address); + + if ( + (port_sas_address.high != phy_sas_address.high) + || (port_sas_address.low != phy_sas_address.low) + ) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + return scic_sds_port_set_phy(this_port, this_phy); +} + + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy + * object. + * + * This method takes the struct scic_sds_port that is in a stopped state and handles + * the remove phy request. In MPC mode the only time a phy can be removed from + * a port is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status + * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not + * be added to the port. SCI_SUCCESS if the phy is added to the port. + */ +static enum sci_status scic_sds_port_stopped_state_remove_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; + + return scic_sds_port_clear_phy(this_port, this_phy); +} + +/* + * **************************************************************************** + * * READY STATE HANDLERS + * **************************************************************************** */ + +/* + * **************************************************************************** + * * RESETTING STATE HANDLERS + * **************************************************************************** */ + +/* + * **************************************************************************** + * * STOPPING STATE HANDLERS + * **************************************************************************** */ + +/** + * + * @port: This is the struct scic_sds_port object on which the io request count will + * be decremented. + * @device: This is the struct scic_sds_remote_device object to which the io request + * is being directed. This parameter is not required to complete this + * operation. + * @io_request: This is the request that is being completed on this port + * object. This parameter is not required to complete this operation. + * + * This method takes the struct scic_sds_port that is in a stopping state and handles + * the complete io request. Should the request count reach 0 then the port + * object will transition to the stopped state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_stopping_state_complete_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + + scic_sds_port_decrement_request_count(this_port); + + if (this_port->started_request_count == 0) { + sci_base_state_machine_change_state( + scic_sds_port_get_base_state_machine(this_port), + SCI_BASE_PORT_STATE_STOPPED + ); + } + + return SCI_SUCCESS; +} + +/* + * **************************************************************************** + * * RESETTING STATE HANDLERS + * **************************************************************************** */ + +/** + * + * @port: This is the port object which is being requested to stop. + * + * This method will stop a failed port. This causes a transition to the + * stopping state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_reset_state_stop_handler( + struct sci_base_port *port) +{ + struct scic_sds_port *this_port = (struct scic_sds_port *)port; + + sci_base_state_machine_change_state( + &this_port->parent.state_machine, + SCI_BASE_PORT_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This method will transition a failed port to its ready state. The port + * failed because a hard reset request timed out but at some time later one or + * more phys in the port became ready. enum sci_status SCI_SUCCESS + */ +static void scic_sds_port_reset_state_link_up_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy) +{ + /* + * / @todo We should make sure that the phy that has gone link up is the same + * / one on which we sent the reset. It is possible that the phy on + * / which we sent the reset is not the one that has gone link up and we + * / want to make sure that phy being reset comes back. Consider the + * / case where a reset is sent but before the hardware processes the + * / reset it get a link up on the port because of a hot plug event. + * / because of the reset request this phy will go link down almost + * / immediately. */ + + /* + * In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + scic_sds_port_general_link_up_handler(this_port, phy, false); +} + +/** + * + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This method process link down notifications that occur during a port reset + * operation. Link downs can occur during the reset operation. enum sci_status + * SCI_SUCCESS + */ +static void scic_sds_port_reset_state_link_down_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy) +{ + /* + * In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + scic_sds_port_deactivate_phy(this_port, phy, false); +} + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_port_state_handler +scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = +{ + /* SCI_BASE_PORT_STATE_STOPPED */ + { + { + scic_sds_port_stopped_state_start_handler, + scic_sds_port_stopped_state_stop_handler, + scic_sds_port_stopped_state_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_stopped_state_add_phy_handler, + scic_sds_port_stopped_state_remove_phy_handler + }, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_default_complete_io_handler + }, + /* SCI_BASE_PORT_STATE_STOPPING */ + { + { + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler + }, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_stopping_state_complete_io_handler + }, + /* SCI_BASE_PORT_STATE_READY */ + { + { + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler + }, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_general_complete_io_handler + }, + /* SCI_BASE_PORT_STATE_RESETTING */ + { + { + scic_sds_port_default_start_handler, + scic_sds_port_reset_state_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler + }, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_reset_state_link_up_handler, + scic_sds_port_reset_state_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_general_complete_io_handler + }, + /* SCI_BASE_PORT_STATE_FAILED */ + { + { + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler + }, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_general_complete_io_handler + } +}; + +/* + * ****************************************************************************** + * * PORT STATE PRIVATE METHODS + * ****************************************************************************** */ + +/** + * + * @this_port: This is the port object which to suspend. + * + * This method will enable the SCU Port Task Scheduler for this port object but + * will leave the port task scheduler in a suspended state. none + */ +static void scic_sds_port_enable_port_task_scheduler( + struct scic_sds_port *this_port) +{ + u32 pts_control_value; + + pts_control_value = scu_port_task_scheduler_read(this_port, control); + + pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); + + scu_port_task_scheduler_write(this_port, control, pts_control_value); +} + +/** + * + * @this_port: This is the port object which to resume. + * + * This method will disable the SCU port task scheduler for this port object. + * none + */ +static void scic_sds_port_disable_port_task_scheduler( + struct scic_sds_port *this_port) +{ + u32 pts_control_value; + + pts_control_value = scu_port_task_scheduler_read(this_port, control); + + pts_control_value &= ~(SCU_PTSxCR_GEN_BIT(ENABLE) + | SCU_PTSxCR_GEN_BIT(SUSPEND)); + + scu_port_task_scheduler_write(this_port, control, pts_control_value); +} + +/* + * ****************************************************************************** + * * PORT STATE METHODS + * ****************************************************************************** */ + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_STOPPED. This function sets the stopped + * state handlers for the struct scic_sds_port object and disables the port task + * scheduler in the hardware. none + */ +static void scic_sds_port_stopped_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + scic_sds_port_set_base_state_handlers( + this_port, SCI_BASE_PORT_STATE_STOPPED + ); + + if ( + SCI_BASE_PORT_STATE_STOPPING + == this_port->parent.state_machine.previous_state_id + ) { + /* + * If we enter this state becasuse of a request to stop + * the port then we want to disable the hardwares port + * task scheduler. */ + scic_sds_port_disable_port_task_scheduler(this_port); + } +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCI_BASE_STATE_STOPPED. This function enables the SCU hardware + * port task scheduler. none + */ +static void scic_sds_port_stopped_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + /* Enable and suspend the port task scheduler */ + scic_sds_port_enable_port_task_scheduler(this_port); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state + * handlers for the struct scic_sds_port object, reports the port object as not ready + * and starts the ready substate machine. none + */ +static void scic_sds_port_ready_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + /* Put the ready state handlers in place though they will not be there long */ + scic_sds_port_set_base_state_handlers( + this_port, SCI_BASE_PORT_STATE_READY + ); + + if ( + SCI_BASE_PORT_STATE_RESETTING + == this_port->parent.state_machine.previous_state_id + ) { + scic_cb_port_hard_reset_complete( + scic_sds_port_get_controller(this_port), + this_port, + SCI_SUCCESS + ); + } else { + /* Notify the caller that the port is not yet ready */ + scic_cb_port_not_ready( + scic_sds_port_get_controller(this_port), + this_port, + SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS + ); + } + + /* Start the ready substate machine */ + sci_base_state_machine_start( + scic_sds_port_get_ready_substate_machine(this_port) + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCI_BASE_STATE_READY. This function does nothing. none + */ +static void scic_sds_port_ready_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + sci_base_state_machine_stop(&this_port->ready_substate_machine); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_RESETTING. This function sets the resetting + * state handlers for the struct scic_sds_port object. none + */ +static void scic_sds_port_resetting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + scic_sds_port_set_base_state_handlers( + this_port, SCI_BASE_PORT_STATE_RESETTING + ); + + scic_sds_port_set_direct_attached_device_id( + this_port, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCI_BASE_STATE_RESETTING. This function does nothing. none + */ +static void scic_sds_port_resetting_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + scic_cb_timer_stop( + scic_sds_port_get_controller(this_port), + this_port->timer_handle + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping + * state handlers for the struct scic_sds_port object. none + */ +static void scic_sds_port_stopping_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + scic_sds_port_set_base_state_handlers( + this_port, SCI_BASE_PORT_STATE_STOPPING + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCI_BASE_STATE_STOPPING. This function does nothing. none + */ +static void scic_sds_port_stopping_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + scic_cb_timer_stop( + scic_sds_port_get_controller(this_port), + this_port->timer_handle + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping + * state handlers for the struct scic_sds_port object. none + */ +static void scic_sds_port_failed_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_port *this_port; + + this_port = (struct scic_sds_port *)object; + + scic_sds_port_set_base_state_handlers( + this_port, + SCI_BASE_PORT_STATE_FAILED + ); + + scic_cb_port_hard_reset_complete( + scic_sds_port_get_controller(this_port), + this_port, + SCI_FAILURE_TIMEOUT + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_port_state_table[] = { + [SCI_BASE_PORT_STATE_STOPPED] = { + .enter_state = scic_sds_port_stopped_state_enter, + .exit_state = scic_sds_port_stopped_state_exit + }, + [SCI_BASE_PORT_STATE_STOPPING] = { + .enter_state = scic_sds_port_stopping_state_enter, + .exit_state = scic_sds_port_stopping_state_exit + }, + [SCI_BASE_PORT_STATE_READY] = { + .enter_state = scic_sds_port_ready_state_enter, + .exit_state = scic_sds_port_ready_state_exit + }, + [SCI_BASE_PORT_STATE_RESETTING] = { + .enter_state = scic_sds_port_resetting_state_enter, + .exit_state = scic_sds_port_resetting_state_exit + }, + [SCI_BASE_PORT_STATE_FAILED] = { + .enter_state = scic_sds_port_failed_state_enter, + } +}; + diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h new file mode 100644 index 0000000..bbb9de5 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -0,0 +1,514 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_PORT_H_ +#define _SCIC_SDS_PORT_H_ + +/** + * This file contains the structures, constants and prototypes for the + * struct scic_sds_port object. + * + * + */ + +#include "sci_controller_constants.h" +#include "intel_sas.h" +#include "sci_base_port.h" +#include "sci_base_phy.h" +#include "scu_registers.h" + +#define SCIC_SDS_DUMMY_PORT 0xFF + +/** + * enum SCIC_SDS_PORT_READY_SUBSTATES - + * + * This enumeration depicts all of the states for the core port ready substate + * machine. + */ +enum SCIC_SDS_PORT_READY_SUBSTATES { + /** + * The substate where the port is started and ready but has no active phys. + */ + SCIC_SDS_PORT_READY_SUBSTATE_WAITING, + + /** + * The substate where the port is started and ready and there is at least one + * phy operational. + */ + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL, + + /** + * The substate where the port is started and there was an add/remove phy + * event. This state is only used in Automatic Port Configuration Mode (APC) + */ + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING, + + SCIC_SDS_PORT_READY_MAX_SUBSTATES +}; + +struct scic_sds_controller; +struct scic_sds_phy; +struct scic_sds_remote_device; +struct scic_sds_request; + +/** + * struct scic_sds_port - + * + * The core port object provides the the abstraction for an SCU port. + */ +struct scic_sds_port { + /** + * This field is the oommon base port object. + */ + struct sci_base_port parent; + + /** + * This field is the port index that is reported to the SCI USER. This allows + * the actual hardware physical port to change without the SCI USER getting a + * different answer for the get port index. + */ + u8 logical_port_index; + + /** + * This field is the port index used to program the SCU hardware. + */ + u8 physical_port_index; + + /** + * This field contains the active phy mask for the port. This mask is used in + * conjunction with the phy state to determine which phy to select for some + * port operations. + */ + u8 active_phy_mask; + + /** + * This field contains the count of the io requests started on this port + * object. It is used to control controller shutdown. + */ + u32 started_request_count; + + /** + * This field contains the number of devices assigned to this port. It is + * used to control port start requests. + */ + u32 assigned_device_count; + + /** + * This field contains the reason for the port not going ready. It is + * assigned in the state handlers and used in the state transition. + */ + u32 not_ready_reason; + + /** + * This field is the table of phys assigned to the port. + */ + struct scic_sds_phy *phy_table[SCI_MAX_PHYS]; + + /** + * This field is a pointer back to the controller that owns this port object. + */ + struct scic_sds_controller *owning_controller; + + /** + * This field contains the port start/stop timer handle. + */ + void *timer_handle; + + /** + * This field points to the current set of state handlers for this port + * object. These state handlers are assigned at each enter state of the state + * machine. + */ + struct scic_sds_port_state_handler *state_handlers; + + /** + * This field is the ready substate machine for the port. + */ + struct sci_base_state_machine ready_substate_machine; + + /* / Memory mapped hardware register space */ + /** + * This field is the pointer to the transport layer register for the SCU + * hardware. + */ + struct scu_transport_layer_registers *transport_layer_registers; + + /** + * This field is the pointer to the port task scheduler registers for the SCU + * hardware. + */ + struct scu_port_task_scheduler_registers *port_task_scheduler_registers; + + /** + * This field is identical for all port objects and points to the port task + * scheduler group PE configuration registers. It is used to assign PEs to a + * port. + */ + SCU_PORT_PE_CONFIGURATION_REGISTER_T *port_pe_configuration_register; + + /** + * This field is the VIIT register space for ths port object. + */ + struct scu_viit_entry *viit_registers; + +}; + + +typedef enum sci_status (*SCIC_SDS_PORT_EVENT_HANDLER_T)(struct scic_sds_port *, u32); + +typedef enum sci_status (*SCIC_SDS_PORT_FRAME_HANDLER_T)(struct scic_sds_port *, u32); + +typedef void (*SCIC_SDS_PORT_LINK_HANDLER_T)(struct scic_sds_port *, struct scic_sds_phy *); + +typedef enum sci_status (*SCIC_SDS_PORT_IO_REQUEST_HANDLER_T)( + struct scic_sds_port *, + struct scic_sds_remote_device *, + struct scic_sds_request *); + +struct scic_sds_port_state_handler { + struct sci_base_port_state_handler parent; + + SCIC_SDS_PORT_FRAME_HANDLER_T frame_handler; + SCIC_SDS_PORT_EVENT_HANDLER_T event_handler; + + SCIC_SDS_PORT_LINK_HANDLER_T link_up_handler; + SCIC_SDS_PORT_LINK_HANDLER_T link_down_handler; + + SCIC_SDS_PORT_IO_REQUEST_HANDLER_T start_io_handler; + SCIC_SDS_PORT_IO_REQUEST_HANDLER_T complete_io_handler; + +}; + +extern const struct sci_base_state scic_sds_port_state_table[]; +extern const struct sci_base_state scic_sds_port_ready_substate_table[]; + +extern struct scic_sds_port_state_handler scic_sds_port_state_handler_table[]; +extern struct scic_sds_port_state_handler scic_sds_port_ready_substate_handler_table[]; + +/** + * scic_sds_port_get_controller() - + * + * Helper macro to get the owning controller of this port + */ +#define scic_sds_port_get_controller(this_port) \ + ((this_port)->owning_controller) + +/** + * scic_sds_port_get_base_state_machine() - + * + * Helper macro to get the base state machine for this port + */ +#define scic_sds_port_get_base_state_machine(this_port) \ + (&(this_port)->parent.state_machine) + +/** + * scic_sds_port_set_base_state_handlers() - + * + * This macro will change the state handlers to those of the specified state id + */ +#define scic_sds_port_set_base_state_handlers(this_port, state_id) \ + scic_sds_port_set_state_handlers(\ + (this_port), &scic_sds_port_state_handler_table[(state_id)]) + +/** + * scic_sds_port_get_ready_substate_machine() - + * + * Helper macro to get the ready substate machine for this port + */ +#define scic_sds_port_get_ready_substate_machine(this_port) \ + (&(this_port)->ready_substate_machine) + +/** + * scic_sds_port_set_state_handlers() - + * + * Helper macro to set the port object state handlers + */ +#define scic_sds_port_set_state_handlers(this_port, handlers) \ + ((this_port)->state_handlers = (handlers)) + +/** + * scic_sds_port_get_index() - + * + * This macro returns the physical port index for this port object + */ +#define scic_sds_port_get_index(this_port) \ + ((this_port)->physical_port_index) + +/** + * scic_sds_port_increment_request_count() - + * + * Helper macro to increment the started request count + */ +#define scic_sds_port_increment_request_count(this_port) \ + ((this_port)->started_request_count++) + +#ifdef SCIC_DEBUG_ENABLED +/** + * scic_sds_port_decrement_request_count() - This method decrements the started + * io request count. The method will not decrment the started io request + * count below 0 and will log a debug message if this is attempted. + * + * + */ +void scic_sds_port_decrement_request_count( + struct scic_sds_port *this_port); +#else +/** + * scic_sds_port_decrement_request_count() - + * + * Helper macro to decrement the started io request count. The macro will not + * decrement the started io request count below 0. + */ +#define scic_sds_port_decrement_request_count(this_port) \ + (\ + (this_port)->started_request_count = (\ + ((this_port)->started_request_count == 0) ? \ + (this_port)->started_request_count : \ + ((this_port)->started_request_count - 1) \ + ) \ + ) +#endif + +/** + * scic_sds_port_write_phy_assignment() - + * + * Helper macro to write the phys port assignment + */ +#define scic_sds_port_write_phy_assignment(port, phy) \ + SCU_PCSPExCR_WRITE(\ + (port), \ + (phy)->phy_index, \ + (port)->physical_port_index \ + ) + +/** + * scic_sds_port_read_phy_assignment() - + * + * Helper macro to read the phys port assignment + */ +#define scic_sds_port_read_phy_assignment(port, phy) \ + SCU_PCSPExCR_READ(\ + (port), \ + (phy)->phy_index \ + ) + +#define scic_sds_port_active_phy(port, phy) \ + (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) + +/* --------------------------------------------------------------------------- */ + + + + +/* --------------------------------------------------------------------------- */ + +/* --------------------------------------------------------------------------- */ + +void scic_sds_port_construct( + struct scic_sds_port *this_port, + u8 port_index, + struct scic_sds_controller *owning_controller); + +enum sci_status scic_sds_port_initialize( + struct scic_sds_port *this_port, + void *transport_layer_registers, + void *port_task_scheduler_registers, + void *port_configuration_regsiter, + void *viit_registers); + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_sds_port_add_phy( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy); + +enum sci_status scic_sds_port_remove_phy( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy); + +void scic_sds_port_set_direct_attached_device_id( + struct scic_sds_port *this_port, + u32 device_id); + +void scic_sds_port_activate_phy( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy, + bool do_notify_user); + +void scic_sds_port_deactivate_phy( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy, + bool do_notify_user); + + + +void scic_sds_port_general_link_up_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *the_phy, + bool do_notify_user); + +bool scic_sds_port_link_detected( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy); + +void scic_sds_port_link_up( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy); + +void scic_sds_port_link_down( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy); + +/* --------------------------------------------------------------------------- */ + + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_sds_port_start_io( + struct scic_sds_port *this_port, + struct scic_sds_remote_device *the_device, + struct scic_sds_request *the_io_request); + +enum sci_status scic_sds_port_complete_io( + struct scic_sds_port *this_port, + struct scic_sds_remote_device *the_device, + struct scic_sds_request *the_io_request); + +/* --------------------------------------------------------------------------- */ + +void scic_sds_port_update_viit_entry( + struct scic_sds_port *this_port); + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_sds_port_default_start_handler( + struct sci_base_port *port); + + +enum sci_status scic_sds_port_default_destruct_handler( + struct sci_base_port *port); + +enum sci_status scic_sds_port_default_reset_handler( + struct sci_base_port *port, + u32 timeout); + + +enum sci_status scic_sds_port_default_remove_phy_handler( + struct sci_base_port *port, + struct sci_base_phy *phy); + +enum sci_status scic_sds_port_default_frame_handler( + struct scic_sds_port *port, + u32 frame_index); + +enum sci_status scic_sds_port_default_event_handler( + struct scic_sds_port *port, + u32 event_code); + +void scic_sds_port_default_link_up_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy); + +void scic_sds_port_default_link_down_handler( + struct scic_sds_port *this_port, + struct scic_sds_phy *phy); + +enum sci_status scic_sds_port_default_start_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request); + + +enum sci_sas_link_rate scic_sds_port_get_max_allowed_speed( + struct scic_sds_port *this_port); + +void scic_sds_port_broadcast_change_received( + struct scic_sds_port *this_port, + struct scic_sds_phy *this_phy); + +bool scic_sds_port_is_valid_phy_assignment( + struct scic_sds_port *this_port, + u32 phy_index); + +bool scic_sds_port_is_phy_mask_valid( + struct scic_sds_port *this_port, + u32 phy_mask); + +u32 scic_sds_port_get_phys( + struct scic_sds_port *this_port); + +void scic_sds_port_get_sas_address( + struct scic_sds_port *this_port, + struct sci_sas_address *sas_address); + +void scic_sds_port_get_attached_sas_address( + struct scic_sds_port *this_port, + struct sci_sas_address *sas_address); + +void scic_sds_port_get_attached_protocols( + struct scic_sds_port *this_port, + struct sci_sas_identify_address_frame_protocols *protocols); + +enum sci_status scic_sds_port_set_phy( + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +enum sci_status scic_sds_port_clear_phy( + struct scic_sds_port *port, + struct scic_sds_phy *phy); + + + +#endif /* _SCIC_SDS_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c new file mode 100644 index 0000000..37d4469 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -0,0 +1,851 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the implementation for the public and protected methods + * for the port configuration agent. + * + * + */ + +#include "sci_environment.h" +#include "scic_controller.h" +#include "scic_sds_controller.h" +#include "scic_sds_port_configuration_agent.h" + +#define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100) + +enum SCIC_SDS_APC_ACTIVITY { + SCIC_SDS_APC_SKIP_PHY, + SCIC_SDS_APC_ADD_PHY, + SCIC_SDS_APC_START_TIMER, + + SCIC_SDS_APC_ACTIVITY_MAX +}; + +/* + * ****************************************************************************** + * General port configuration agent routines + * ****************************************************************************** */ + +/** + * + * @address_one: A SAS Address to be compared. + * @address_two: A SAS Address to be compared. + * + * Compare the two SAS Address and if SAS Address One is greater than SAS + * Address Two then return > 0 else if SAS Address One is less than SAS Address + * Two return < 0 Otherwise they are the same return 0 A signed value of x > 0 + * > y where x is returned for Address One > Address Two y is returned for + * Address One < Address Two 0 is returned ofr Address One = Address Two + */ +static s32 sci_sas_address_compare( + struct sci_sas_address address_one, + struct sci_sas_address address_two) +{ + if (address_one.high > address_two.high) { + return 1; + } else if (address_one.high < address_two.high) { + return -1; + } else if (address_one.low > address_two.low) { + return 1; + } else if (address_one.low < address_two.low) { + return -1; + } + + /* The two SAS Address must be identical */ + return 0; +} + +/** + * + * @controller: The controller object used for the port search. + * @phy: The phy object to match. + * + * This routine will find a matching port for the phy. This means that the + * port and phy both have the same broadcast sas address and same received sas + * address. The port address or the SCI_INVALID_HANDLE if there is no matching + * port. port address if the port can be found to match the phy. + * SCI_INVALID_HANDLE if there is no matching port for the phy. + */ +static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( + struct scic_sds_controller *controller, + struct scic_sds_phy *phy) +{ + u8 port_index; + struct scic_sds_port *port_handle; + struct sci_sas_address port_sas_address; + struct sci_sas_address port_attached_device_address; + struct sci_sas_address phy_sas_address; + struct sci_sas_address phy_attached_device_address; + + /* + * Since this phy can be a member of a wide port check to see if one or + * more phys match the sent and received SAS address as this phy in which + * case it should participate in the same port. */ + scic_sds_phy_get_sas_address(phy, &phy_sas_address); + scic_sds_phy_get_attached_sas_address(phy, &phy_attached_device_address); + + for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { + if (scic_controller_get_port_handle(controller, port_index, &port_handle) == SCI_SUCCESS) { + struct scic_sds_port *port = (struct scic_sds_port *)port_handle; + + scic_sds_port_get_sas_address(port, &port_sas_address); + scic_sds_port_get_attached_sas_address(port, &port_attached_device_address); + + if ( + (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0) + && (sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) + ) { + return port; + } + } + } + + return SCI_INVALID_HANDLE; +} + +/** + * + * @controller: This is the controller object that contains the port agent + * @port_agent: This is the port configruation agent for the controller. + * + * This routine will validate the port configuration is correct for the SCU + * hardware. The SCU hardware allows for port configurations as follows. LP0 + * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2, + * PE3) LP3 -> (PE3) enum sci_status SCI_SUCCESS the port configuration is valid for + * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION + * the port configuration is not valid for this port configuration agent. + */ +static enum sci_status scic_sds_port_configuration_agent_validate_ports( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent) +{ + struct sci_sas_address first_address; + struct sci_sas_address second_address; + + /* + * Sanity check the max ranges for all the phys the max index + * is always equal to the port range index */ + if ( + (port_agent->phy_valid_port_range[0].max_index != 0) + || (port_agent->phy_valid_port_range[1].max_index != 1) + || (port_agent->phy_valid_port_range[2].max_index != 2) + || (port_agent->phy_valid_port_range[3].max_index != 3) + ) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * This is a request to configure a single x4 port or at least attempt + * to make all the phys into a single port */ + if ( + (port_agent->phy_valid_port_range[0].min_index == 0) + && (port_agent->phy_valid_port_range[1].min_index == 0) + && (port_agent->phy_valid_port_range[2].min_index == 0) + && (port_agent->phy_valid_port_range[3].min_index == 0) + ) { + return SCI_SUCCESS; + } + + /* + * This is a degenerate case where phy 1 and phy 2 are assigned + * to the same port this is explicitly disallowed by the hardware + * unless they are part of the same x4 port and this condition was + * already checked above. */ + if (port_agent->phy_valid_port_range[2].min_index == 1) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE3 can never have the same SAS Address unless they + * are part of the same x4 wide port and we have already checked + * for this condition. */ + scic_sds_phy_get_sas_address(&controller->phy_table[0], &first_address); + scic_sds_phy_get_sas_address(&controller->phy_table[3], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE1 are configured into a 2x1 ports make sure that the + * SAS Address for PE0 and PE2 are different since they can not be + * part of the same port. */ + if ( + (port_agent->phy_valid_port_range[0].min_index == 0) + && (port_agent->phy_valid_port_range[1].min_index == 1) + ) { + scic_sds_phy_get_sas_address(&controller->phy_table[0], &first_address); + scic_sds_phy_get_sas_address(&controller->phy_table[2], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + /* + * PE2 and PE3 are configured into a 2x1 ports make sure that the + * SAS Address for PE1 and PE3 are different since they can not be + * part of the same port. */ + if ( + (port_agent->phy_valid_port_range[2].min_index == 2) + && (port_agent->phy_valid_port_range[3].min_index == 3) + ) { + scic_sds_phy_get_sas_address(&controller->phy_table[1], &first_address); + scic_sds_phy_get_sas_address(&controller->phy_table[3], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + return SCI_SUCCESS; +} + +/* + * ****************************************************************************** + * Manual port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This routine will verify that all of the phys in the same port are using the + * same SAS address. + */ +static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent) +{ + u32 phy_mask; + u32 assigned_phy_mask; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + u8 port_index; + u8 phy_index; + + assigned_phy_mask = 0; + sas_address.high = 0; + sas_address.low = 0; + + for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { + phy_mask = controller->oem_parameters.sds1.ports[port_index].phy_mask; + + if (phy_mask != 0) { + /* + * Make sure that one or more of the phys were not already assinged to + * a different port. */ + if ((phy_mask & ~assigned_phy_mask) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* Find the starting phy index for this round through the loop */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { + if ((1 << phy_index) & phy_mask) { + scic_sds_phy_get_sas_address( + &controller->phy_table[phy_index], &sas_address + ); + + /* + * The phy_index can be used as the starting point for the + * port range since the hardware starts all logical ports + * the same as the PE index. */ + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + if (phy_index != port_index) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + break; + } + } + + /* + * See how many additional phys are being added to this logical port. + * Note: We have not moved the current phy_index so we will actually + * compare the startting phy with itself. + * This is expected and required to add the phy to the port. */ + while (phy_index < SCI_MAX_PHYS) { + if ((1 << phy_index) & phy_mask) { + scic_sds_phy_get_sas_address( + &controller->phy_table[phy_index], &phy_assigned_address + ); + + if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { + /* + * The phy mask specified that this phy is part of the same port + * as the starting phy and it is not so fail this configuration */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + scic_sds_port_add_phy( + &controller->port_table[port_index], + &controller->phy_table[phy_index] + ); + + assigned_phy_mask |= (1 << phy_index); + } + + phy_index++; + } + } + } + + return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); +} + +/** + * + * + * This timer routine is used to allow the SCI User to rediscover or change + * device objects before a new series of link up notifications because a link + * down has allowed a better port configuration. + */ +static void scic_sds_mpc_agent_timeout_handler( + void *object) +{ + u8 index; + struct scic_sds_controller *controller = (struct scic_sds_controller *)object; + struct scic_sds_port_configuration_agent *port_agent = &controller->port_agent; + u16 configure_phy_mask; + + port_agent->timer_pending = false; + + /* Find the mask of phys that are reported read but as yet unconfigured into a port */ + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (configure_phy_mask & (1 << index)) { + port_agent->link_up_handler( + controller, + port_agent, + scic_sds_phy_get_port(&controller->phy_table[index]), + &controller->phy_table[index] + ); + } + } +} + +/** + * + * @controller: This is the controller object that receives the link up + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an SCI_INVALID_HANDLE. + * @phy: This is the phy object which has gone ready. + * + * This method handles the manual port configuration link up notifications. + * Since all ports and phys are associate at initialization time we just turn + * around and notifiy the port object that there is a link up. If this PHY is + * not associated with a port there is no action taken. Is it possible to get a + * link up notification from a phy that has no assocoated port? + */ +static void scic_sds_mpc_agent_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + /* + * If the port has an invalid handle then the phy was not assigned to + * a port. This is because the phy was not given the same SAS Address + * as the other PHYs in the port. */ + if (port != SCI_INVALID_HANDLE) { + port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy)); + + scic_sds_port_link_up(port, phy); + + if ((port->active_phy_mask & (1 << scic_sds_phy_get_index(phy))) != 0) { + port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(phy)); + } + } +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an SCI_INVALID_HANDLE. The port is an invalid + * handle only if the phy was never port of this port. This happens when + * the phy is not broadcasting the same SAS address as the other phys in the + * assigned port. + * @phy: This is the phy object which has gone link down. + * + * This method handles the manual port configuration link down notifications. + * Since all ports and phys are associated at initialization time we just turn + * around and notifiy the port object of the link down event. If this PHY is + * not associated with a port there is no action taken. Is it possible to get a + * link down notification from a phy that has no assocoated port? + */ +static void scic_sds_mpc_agent_link_down( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + if (port != SCI_INVALID_HANDLE) { + /* + * If we can form a new port from the remainder of the phys then we want + * to start the timer to allow the SCI User to cleanup old devices and + * rediscover the port before rebuilding the port with the phys that + * remain in the ready state. */ + port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy)); + port_agent->phy_configured_mask &= ~(1 << scic_sds_phy_get_index(phy)); + + /* + * Check to see if there are more phys waiting to be configured into a port. + * If there are allow the SCI User to tear down this port, if necessary, and + * then reconstruc the port after the timeout. */ + if ( + (port_agent->phy_configured_mask == 0x0000) + && (port_agent->phy_ready_mask != 0x0000) + && !port_agent->timer_pending + ) { + port_agent->timer_pending = true; + + scic_cb_timer_start( + controller, + port_agent->timer, + SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT + ); + } + + scic_sds_port_link_down(port, phy); + } +} + +/* + * ****************************************************************************** + * Automatic port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This routine will verify that the phys are assigned a valid SAS address for + * automatic port configuration mode. + */ +static enum sci_status scic_sds_apc_agent_validate_phy_configuration( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent) +{ + u8 phy_index; + u8 port_index; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + + phy_index = 0; + + while (phy_index < SCI_MAX_PHYS) { + port_index = phy_index; + + /* Get the assigned SAS Address for the first PHY on the controller. */ + scic_sds_phy_get_sas_address( + &controller->phy_table[phy_index], &sas_address + ); + + while (++phy_index < SCI_MAX_PHYS) { + scic_sds_phy_get_sas_address( + &controller->phy_table[phy_index], &phy_assigned_address + ); + + /* Verify each of the SAS address are all the same for every PHY */ + if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) { + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + } else { + port_agent->phy_valid_port_range[phy_index].min_index = phy_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + break; + } + } + } + + return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); +} + +/** + * + * @controller: This is the controller that to which the port agent is assigned. + * @port_agent: This is the port agent that is requesting the timer start + * operation. + * @phy: This is the phy that has caused the timer operation to be scheduled. + * + * This routine will restart the automatic port configuration timeout timer for + * the next time period. This could be caused by either a link down event or a + * link up event where we can not yet tell to which port a phy belongs. + */ +static void scic_sds_apc_agent_start_timer( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_phy *phy, + u32 timeout) +{ + if (port_agent->timer_pending) { + scic_cb_timer_stop(controller, port_agent->timer); + } + + port_agent->timer_pending = true; + + scic_cb_timer_start(controller, port_agent->timer, timeout); +} + +/** + * + * @controller: This is the controller object that receives the link up + * notification. + * @phy: This is the phy object which has gone link up. + * + * This method handles the automatic port configuration for link up + * notifications. + */ +static void scic_sds_apc_agent_configure_ports( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_phy *phy, + bool start_timer) +{ + u8 port_index; + enum sci_status status; + struct scic_sds_port *port; + struct scic_sds_port *port_handle; + enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; + + port = scic_sds_port_configuration_agent_find_port(controller, phy); + + if (port != SCI_INVALID_HANDLE) { + if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) + apc_activity = SCIC_SDS_APC_ADD_PHY; + else + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } else { + /* + * There is no matching Port for this PHY so lets search through the + * Ports and see if we can add the PHY to its own port or maybe start + * the timer and wait to see if a wider port can be made. + * + * Note the break when we reach the condition of the port id == phy id */ + for ( + port_index = port_agent->phy_valid_port_range[phy->phy_index].min_index; + port_index <= port_agent->phy_valid_port_range[phy->phy_index].max_index; + port_index++ + ) { + scic_controller_get_port_handle(controller, port_index, &port_handle); + + port = (struct scic_sds_port *)port_handle; + + /* First we must make sure that this PHY can be added to this Port. */ + if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) { + /* + * Port contains a PHY with a greater PHY ID than the current + * PHY that has gone link up. This phy can not be part of any + * port so skip it and move on. */ + if (port->active_phy_mask > (1 << phy->phy_index)) { + apc_activity = SCIC_SDS_APC_SKIP_PHY; + break; + } + + /* + * We have reached the end of our Port list and have not found + * any reason why we should not either add the PHY to the port + * or wait for more phys to become active. */ + if (port->physical_port_index == phy->phy_index) { + /* + * The Port either has no active PHYs. + * Consider that if the port had any active PHYs we would have + * or active PHYs with + * a lower PHY Id than this PHY. */ + if (apc_activity != SCIC_SDS_APC_START_TIMER) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + break; + } + + /* + * The current Port has no active PHYs and this PHY could be part + * of this Port. Since we dont know as yet setup to start the + * timer and see if there is a better configuration. */ + if (port->active_phy_mask == 0) { + apc_activity = SCIC_SDS_APC_START_TIMER; + } + } else if (port->active_phy_mask != 0) { + /* + * The Port has an active phy and the current Phy can not + * participate in this port so skip the PHY and see if + * there is a better configuration. */ + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } + } + } + + /* + * Check to see if the start timer operations should instead map to an + * add phy operation. This is caused because we have been waiting to + * add a phy to a port but could not becuase the automatic port + * configuration engine had a choice of possible ports for the phy. + * Since we have gone through a timeout we are going to restrict the + * choice to the smallest possible port. */ + if ( + (start_timer == false) + && (apc_activity == SCIC_SDS_APC_START_TIMER) + ) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + switch (apc_activity) { + case SCIC_SDS_APC_ADD_PHY: + status = scic_sds_port_add_phy(port, phy); + + if (status == SCI_SUCCESS) { + port_agent->phy_configured_mask |= (1 << phy->phy_index); + } + break; + + case SCIC_SDS_APC_START_TIMER: + scic_sds_apc_agent_start_timer( + controller, port_agent, phy, SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION + ); + break; + + case SCIC_SDS_APC_SKIP_PHY: + default: + /* do nothing the PHY can not be made part of a port at this time. */ + break; + } +} + +/** + * + * @controller: This is the controller object that receives the link up + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an SCI_INVALID_HANDLE. + * @phy: This is the phy object which has gone link up. + * + * This method handles the automatic port configuration for link up + * notifications. Is it possible to get a link down notification from a phy + * that has no assocoated port? + */ +static void scic_sds_apc_agent_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + BUG_ON(port != SCI_INVALID_HANDLE); + + port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy)); + + scic_sds_apc_agent_configure_ports(controller, port_agent, phy, true); +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an SCI_INVALID_HANDLE. + * @phy: This is the phy object which has gone link down. + * + * This method handles the automatic port configuration link down + * notifications. not associated with a port there is no action taken. Is it + * possible to get a link down notification from a phy that has no assocoated + * port? + */ +static void scic_sds_apc_agent_link_down( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy)); + + if (port != SCI_INVALID_HANDLE) { + if (port_agent->phy_configured_mask & (1 << phy->phy_index)) { + enum sci_status status; + + status = scic_sds_port_remove_phy(port, phy); + + if (status == SCI_SUCCESS) { + port_agent->phy_configured_mask &= ~(1 << phy->phy_index); + } + } + } +} + +/** + * + * + * This routine will try to configure the phys into ports when the timer fires. + */ +static void scic_sds_apc_agent_timeout_handler( + void *object) +{ + u32 index; + struct scic_sds_port_configuration_agent *port_agent; + struct scic_sds_controller *controller = (struct scic_sds_controller *)object; + u16 configure_phy_mask; + + port_agent = scic_sds_controller_get_port_configuration_agent(controller); + + port_agent->timer_pending = false; + + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + if (configure_phy_mask != 0x00) { + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (configure_phy_mask & (1 << index)) { + scic_sds_apc_agent_configure_ports( + controller, port_agent, &controller->phy_table[index], false + ); + } + } + } +} + +/* + * ****************************************************************************** + * Public port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This method will construct the port configuration agent for operation. This + * call is universal for both manual port configuration and automatic port + * configuration modes. + */ +void scic_sds_port_configuration_agent_construct( + struct scic_sds_port_configuration_agent *port_agent) +{ + u32 index; + + port_agent->phy_configured_mask = 0x00; + port_agent->phy_ready_mask = 0x00; + + port_agent->link_up_handler = NULL; + port_agent->link_down_handler = NULL; + + port_agent->timer_pending = false; + port_agent->timer = NULL; + + for (index = 0; index < SCI_MAX_PORTS; index++) { + port_agent->phy_valid_port_range[index].min_index = 0; + port_agent->phy_valid_port_range[index].max_index = 0; + } +} + +/** + * + * @controller: This is the controller object for which the port agent is being + * initialized. + * + * This method will construct the port configuration agent for this controller. + */ +enum sci_status scic_sds_port_configuration_agent_initialize( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent) +{ + enum sci_status status = SCI_SUCCESS; + enum SCIC_PORT_CONFIGURATION_MODE mode; + + mode = scic_sds_controller_get_port_configuration_mode(controller); + + if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + status = scic_sds_mpc_agent_validate_phy_configuration(controller, port_agent); + + port_agent->link_up_handler = scic_sds_mpc_agent_link_up; + port_agent->link_down_handler = scic_sds_mpc_agent_link_down; + + port_agent->timer = scic_cb_timer_create( + controller, + scic_sds_mpc_agent_timeout_handler, + controller + ); + } else { + status = scic_sds_apc_agent_validate_phy_configuration(controller, port_agent); + + port_agent->link_up_handler = scic_sds_apc_agent_link_up; + port_agent->link_down_handler = scic_sds_apc_agent_link_down; + + port_agent->timer = scic_cb_timer_create( + controller, + scic_sds_apc_agent_timeout_handler, + controller + ); + } + + /* Make sure we have actually gotten a timer */ + if ((status == SCI_SUCCESS) && (port_agent->timer == NULL)) { + dev_err(scic_to_dev(controller), + "%s: Controller 0x%p automatic port configuration " + "agent could not get timer.\n", + __func__, + controller); + + status = SCI_FAILURE; + } + + return status; +} diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h new file mode 100644 index 0000000..4146735 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h @@ -0,0 +1,108 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_PORT_CONFIGURATION_AGENT_H_ +#define _SCIC_SDS_PORT_CONFIGURATION_AGENT_H_ + +/** + * This file contains the structures, constants and prototypes used for the + * core controller automatic port configuration engine. + * + * + */ + +#include "scic_sds_port.h" +#include "scic_sds_phy.h" + +struct scic_sds_controller; +struct scic_sds_port_configuration_agent; +struct scic_sds_port; +struct scic_sds_phy; + +typedef void (*SCIC_SDS_PORT_CONFIGURATION_AGENT_PHY_HANDLER_T)( + struct scic_sds_controller *, + struct scic_sds_port_configuration_agent *, + struct scic_sds_port *, + struct scic_sds_phy * + ); + +struct SCIC_SDS_PORT_RANGE { + u8 min_index; + u8 max_index; +}; + +struct scic_sds_port_configuration_agent { + u16 phy_configured_mask; + u16 phy_ready_mask; + + struct SCIC_SDS_PORT_RANGE phy_valid_port_range[SCI_MAX_PHYS]; + + bool timer_pending; + + SCIC_SDS_PORT_CONFIGURATION_AGENT_PHY_HANDLER_T link_up_handler; + SCIC_SDS_PORT_CONFIGURATION_AGENT_PHY_HANDLER_T link_down_handler; + + void *timer; + +}; + +void scic_sds_port_configuration_agent_construct( + struct scic_sds_port_configuration_agent *port_agent); + +enum sci_status scic_sds_port_configuration_agent_initialize( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent); + +#endif /* _SCIC_SDS_PORT_CONFIGURATION_AGENT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port_registers.h b/drivers/scsi/isci/core/scic_sds_port_registers.h new file mode 100644 index 0000000..cf8bc07 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_port_registers.h @@ -0,0 +1,223 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_PORT_REGISTERS_H_ +#define _SCIC_SDS_PORT_REGISTERS_H_ + +/** + * This file contains a set of macros that assist in reading the SCU hardware + * registers. + * + * + */ + +/** + * scu_transport_layer_read() - + * + * Macro to read the transport layer register associated with this port object. + */ +#define scu_transport_layer_read(port, reg) \ + scu_register_read(\ + scic_sds_port_get_controller(port), \ + (port)->transport_layer_registers->reg \ + ) + +/** + * scu_transport_layer_write() - + * + * Macro to write the transport layer register associated with this port object. + */ +#define scu_transport_layer_write(port, reg, value) \ + scu_register_write(\ + scic_sds_port_get_controller(port), \ + (port)->transport_layer_registers->reg, \ + (value) \ + ) + +/** + * scu_port_task_scheduler_read() - + * + * Macro to read the port task scheduler register associated with this port + * object + */ +#define scu_port_task_scheduler_read(port, reg) \ + scu_register_read(\ + scic_sds_port_get_controller(port), \ + (port)->port_task_scheduler_registers->reg \ + ) + +/** + * scu_port_task_scheduler_write() - + * + * Macro to write the port task scheduler register associated with this port + * object + */ +#define scu_port_task_scheduler_write(port, reg, value) \ + scu_register_write(\ + scic_sds_port_get_controller(port), \ + (port)->port_task_scheduler_registers->reg, \ + (value) \ + ) + +#define scu_port_viit_register_write(port, reg, value) \ + scu_register_write(\ + scic_sds_port_get_controller(port), \ + (port)->viit_registers->reg, \ + (value) \ + ) + +/* + * **************************************************************************** + * * Transport Layer registers controlled by the port object + * **************************************************************************** */ + +/** + * SCU_TLCR_READ() - + * + * This macro reads the Transport layer control register + */ +#define SCU_TLCR_READ(port) \ + scu_transport_layer_read(port, control) + +/** + * SCU_TLCR_WRITE() - + * + * This macro writes the Transport layer control register + */ +#define SCU_TLCR_WRITE(port, value) \ + scu_transport_layer_write(port, control, value) + +/** + * SCU_TLADTR_READ() - + * + * This macro reads the Transport layer address translation register + */ +#define SCU_TLADTR_READ(port) \ + scu_transport_layer_read(port, address_translation) + +/** + * SCU_TLADTR_WRITE() - + * + * This macro writes the Transport layer address translation register + */ +#define SCU_TLADTR_WRITE(port) \ + scu_transport_layer_write(port, address_translation, value) + +/** + * SCU_STPTLDARNI_WRITE() - + * + * This macro writes the STP Transport Layer Direct Attached RNi register. + */ +#define SCU_STPTLDARNI_WRITE(port, index) \ + scu_transport_layer_write(port, stp_rni, index) + +/** + * SCU_STPTLDARNI_READ() - + * + * This macro reads the STP Transport Layer Direct Attached RNi register. + */ +#define SCU_STPTLDARNI_READ(port) \ + scu_transport_layer_read(port, stp_rni) + +/* + * **************************************************************************** + * * Port Task Scheduler registers controlled by the port object + * **************************************************************************** */ + +/** + * SCU_PTSxCR_READ() - + * + * Macro to read the port task scheduler control register + */ +#define SCU_PTSxCR_READ(port) \ + scu_port_task_scheduler_read(port, control) + +/** + * SCU_PTSxCR_WRITE() - + * + * Macro to write the port task scheduler control regsister + */ +#define SCU_PTSxCR_WRITE(port, value) \ + scu_port_task_scheduler_write(port, control, value) + +/* + * **************************************************************************** + * * Port PE Configuration registers + * **************************************************************************** */ + +/** + * SCU_PCSPExCR_WRITE() - + * + * Macro to write the PE Port Configuration Register + */ +#define SCU_PCSPExCR_WRITE(port, phy_id, value) \ + scu_register_write(\ + scic_sds_port_get_controller(port), \ + (port)->port_pe_configuration_register[phy_id], \ + (value) \ + ) + +/** + * SCU_PCSPExCR_READ() - + * + * Macro to read the PE Port Configuration Regsiter + */ +#define SCU_PCSPExCR_READ(port, phy_id) \ + scu_register_read(\ + scic_sds_port_get_controller(port), \ + (port)->port_pe_configuration_register[phy_id] \ + ) + +#endif /* _SCIC_SDS_PORT_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c new file mode 100644 index 0000000..21f03bc --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -0,0 +1,2252 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the implementation of remote device methods. + * + * + */ + +#include "intel_sas.h" +#include "sci_util.h" +#include "sci_environment.h" +#include "scic_port.h" +#include "scic_phy.h" +#include "scic_remote_device.h" +#include "scic_sds_port.h" +#include "scic_sds_phy.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_request.h" +#include "scic_sds_controller.h" + +#define SCIC_SDS_REMOTE_DEVICE_RESET_TIMEOUT (1000) + +/* + * ***************************************************************************** + * * CORE REMOTE DEVICE PRIVATE METHODS + * ***************************************************************************** */ + +/* + * ***************************************************************************** + * * CORE REMOTE DEVICE PUBLIC METHODS + * ***************************************************************************** */ + +u32 scic_remote_device_get_object_size(void) +{ + return sizeof(struct scic_sds_remote_device) + + sizeof(struct scic_sds_remote_node_context); +} + +/* --------------------------------------------------------------------------- */ + +void scic_remote_device_construct(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev) +{ + sci_dev->owning_port = sci_port; + sci_dev->started_request_count = 0; + sci_dev->rnc = (struct scic_sds_remote_node_context *) &sci_dev[1]; + + sci_base_remote_device_construct( + &sci_dev->parent, + scic_sds_remote_device_state_table + ); + + scic_sds_remote_node_context_construct( + sci_dev, + sci_dev->rnc, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX + ); + + sci_object_set_association(sci_dev->rnc, sci_dev); +} + + +enum sci_status scic_remote_device_da_construct( + struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status; + u16 remote_node_index; + struct sci_sas_identify_address_frame_protocols protocols; + + /* + * This information is request to determine how many remote node context + * entries will be needed to store the remote node. + */ + scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols); + sci_dev->target_protocols.u.all = protocols.u.all; + sci_dev->is_direct_attached = true; +#if !defined(DISABLE_ATAPI) + sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev); +#endif + + status = scic_sds_controller_allocate_remote_node_context( + sci_dev->owning_port->owning_controller, + sci_dev, + &remote_node_index); + + if (status == SCI_SUCCESS) { + scic_sds_remote_node_context_set_remote_node_index( + sci_dev->rnc, remote_node_index); + + scic_sds_port_get_attached_sas_address( + sci_dev->owning_port, &sci_dev->device_address); + + if (sci_dev->target_protocols.u.bits.attached_ssp_target) { + sci_dev->has_ready_substate_machine = false; + } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { + sci_dev->has_ready_substate_machine = true; + + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent.parent, + scic_sds_stp_remote_device_ready_substate_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { + sci_dev->has_ready_substate_machine = true; + + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent.parent, + scic_sds_smp_remote_device_ready_substate_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } + + sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed( + sci_dev->owning_port); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; + } + + return status; +} + + +static void scic_sds_remote_device_get_info_from_smp_discover_response( + struct scic_sds_remote_device *this_device, + struct smp_response_discover *discover_response) +{ + /* decode discover_response to set sas_address to this_device. */ + this_device->device_address.high = + discover_response->attached_sas_address.high; + + this_device->device_address.low = + discover_response->attached_sas_address.low; + + this_device->target_protocols.u.all = discover_response->protocols.u.all; +} + + +enum sci_status scic_remote_device_ea_construct( + struct scic_sds_remote_device *sci_dev, + struct smp_response_discover *discover_response) +{ + enum sci_status status; + struct scic_sds_controller *the_controller; + + the_controller = scic_sds_port_get_controller(sci_dev->owning_port); + + scic_sds_remote_device_get_info_from_smp_discover_response( + sci_dev, discover_response); + + status = scic_sds_controller_allocate_remote_node_context( + the_controller, sci_dev, &sci_dev->rnc->remote_node_index); + + if (status == SCI_SUCCESS) { + if (sci_dev->target_protocols.u.bits.attached_ssp_target) { + sci_dev->has_ready_substate_machine = false; + } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { + sci_dev->has_ready_substate_machine = true; + + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent.parent, + scic_sds_smp_remote_device_ready_substate_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { + sci_dev->has_ready_substate_machine = true; + + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent.parent, + scic_sds_stp_remote_device_ready_substate_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } + + /* + * For SAS-2 the physical link rate is actually a logical link + * rate that incorporates multiplexing. The SCU doesn't + * incorporate multiplexing and for the purposes of the + * connection the logical link rate is that same as the + * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay + * one another, so this code works for both situations. */ + sci_dev->connection_rate = min_t(u16, + scic_sds_port_get_max_allowed_speed(sci_dev->owning_port), + discover_response->u2.sas1_1.negotiated_physical_link_rate + ); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; + } + + return status; +} + +enum sci_status scic_remote_device_destruct( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->parent.destruct_handler(&sci_dev->parent); +} + + +enum sci_status scic_remote_device_start( + struct scic_sds_remote_device *sci_dev, + u32 timeout) +{ + return sci_dev->state_handlers->parent.start_handler(&sci_dev->parent); +} + + +enum sci_status scic_remote_device_stop( + struct scic_sds_remote_device *sci_dev, + u32 timeout) +{ + return sci_dev->state_handlers->parent.stop_handler(&sci_dev->parent); +} + + +enum sci_status scic_remote_device_reset( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->parent.reset_handler(&sci_dev->parent); +} + + +enum sci_status scic_remote_device_reset_complete( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->parent.reset_complete_handler(&sci_dev->parent); +} + + +enum sci_sas_link_rate scic_remote_device_get_connection_rate( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->connection_rate; +} + + +void scic_remote_device_get_protocols( + struct scic_sds_remote_device *sci_dev, + struct smp_discover_response_protocols *pr) +{ + pr->u.all = sci_dev->target_protocols.u.all; +} + +#if !defined(DISABLE_ATAPI) +bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->is_atapi; +} +#endif + + +/* + * ***************************************************************************** + * * SCU DRIVER STANDARD (SDS) REMOTE DEVICE IMPLEMENTATIONS + * ***************************************************************************** */ + +/** + * + * + * Remote device timer requirements + */ +#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0) +#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES) + + +/** + * + * @this_device: The remote device for which the suspend is being requested. + * + * This method invokes the remote device suspend state handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_suspend( + struct scic_sds_remote_device *this_device, + u32 suspend_type) +{ + return this_device->state_handlers->suspend_handler(this_device, suspend_type); +} + +/** + * + * @this_device: The remote device for which the resume is being requested. + * + * This method invokes the remote device resume state handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_resume( + struct scic_sds_remote_device *this_device) +{ + return this_device->state_handlers->resume_handler(this_device); +} + +/** + * + * @this_device: The remote device for which the event handling is being + * requested. + * @frame_index: This is the frame index that is being processed. + * + * This method invokes the frame handler for the remote device state machine + * enum sci_status + */ +enum sci_status scic_sds_remote_device_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index) +{ + return this_device->state_handlers->frame_handler(this_device, frame_index); +} + +/** + * + * @this_device: The remote device for which the event handling is being + * requested. + * @event_code: This is the event code that is to be processed. + * + * This method invokes the remote device event handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_event_handler( + struct scic_sds_remote_device *this_device, + u32 event_code) +{ + return this_device->state_handlers->event_handler(this_device, event_code); +} + +/** + * + * @controller: The controller that is starting the io request. + * @this_device: The remote device for which the start io handling is being + * requested. + * @io_request: The io request that is being started. + * + * This method invokes the remote device start io handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_start_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *this_device, + struct scic_sds_request *io_request) +{ + return this_device->state_handlers->parent.start_io_handler( + &this_device->parent, &io_request->parent); +} + +/** + * + * @controller: The controller that is completing the io request. + * @this_device: The remote device for which the complete io handling is being + * requested. + * @io_request: The io request that is being completed. + * + * This method invokes the remote device complete io handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_complete_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *this_device, + struct scic_sds_request *io_request) +{ + return this_device->state_handlers->parent.complete_io_handler( + &this_device->parent, &io_request->parent); +} + +/** + * + * @controller: The controller that is starting the task request. + * @this_device: The remote device for which the start task handling is being + * requested. + * @io_request: The task request that is being started. + * + * This method invokes the remote device start task handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_start_task( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *this_device, + struct scic_sds_request *io_request) +{ + return this_device->state_handlers->parent.start_task_handler( + &this_device->parent, &io_request->parent); +} + +/** + * + * @controller: The controller that is completing the task request. + * @this_device: The remote device for which the complete task handling is + * being requested. + * @io_request: The task request that is being completed. + * + * This method invokes the remote device complete task handler. enum sci_status + */ + +/** + * + * @this_device: + * @request: + * + * This method takes the request and bulids an appropriate SCU context for the + * request and then requests the controller to post the request. none + */ +void scic_sds_remote_device_post_request( + struct scic_sds_remote_device *this_device, + u32 request) +{ + u32 context; + + context = scic_sds_remote_device_build_command_context(this_device, request); + + scic_sds_controller_post_request( + scic_sds_remote_device_get_controller(this_device), + context + ); +} + +#if !defined(DISABLE_ATAPI) +/** + * + * @this_device: The device to be checked. + * + * This method check the signature fis of a stp device to decide whether a + * device is atapi or not. true if a device is atapi device. False if a device + * is not atapi. + */ +bool scic_sds_remote_device_is_atapi( + struct scic_sds_remote_device *this_device) +{ + if (!this_device->target_protocols.u.bits.attached_stp_target) + return false; + else if (this_device->is_direct_attached) { + struct scic_sds_phy *phy; + struct scic_sata_phy_properties properties; + struct sata_fis_reg_d2h *signature_fis; + phy = scic_sds_port_get_a_connected_phy(this_device->owning_port); + scic_sata_phy_get_properties(phy, &properties); + + /* decode the signature fis. */ + signature_fis = &(properties.signature_fis); + + if ((signature_fis->sector_count == 0x01) + && (signature_fis->lba_low == 0x01) + && (signature_fis->lba_mid == 0x14) + && (signature_fis->lba_high == 0xEB) + && ((signature_fis->device & 0x5F) == 0x00) + ) { + /* An ATA device supporting the PACKET command set. */ + return true; + } else + return false; + } else { + /* Expander supported ATAPI device is not currently supported. */ + return false; + } +} +#endif +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the state handlers for the struct scic_sds_remote_device for the + * base state machine. + * + * + */ + +#include "sci_environment.h" +#include "scic_user_callback.h" +#include "scic_controller.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "scic_sds_request.h" +#include "scic_sds_remote_node_context.h" +#include "scu_event_codes.h" + +/* + * ***************************************************************************** + * * PROTECTED METHODS + * ***************************************************************************** */ + +/** + * + * @user_parameter: This is cast to a remote device object. + * + * This method is called once the remote node context is ready to be freed. + * The remote device can now report that its stop operation is complete. none + */ +static void scic_sds_cb_remote_device_rnc_destruct_complete( + void *user_parameter) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)user_parameter; + + BUG_ON(this_device->started_request_count != 0); + + sci_base_state_machine_change_state( + scic_sds_remote_device_get_base_state_machine(this_device), + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED + ); +} + +/** + * + * @user_parameter: This is cast to a remote device object. + * + * This method is called once the remote node context has transisitioned to a + * ready state. This is the indication that the remote device object can also + * transition to ready. none + */ +static void scic_sds_remote_device_resume_complete_handler( + void *user_parameter) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)user_parameter; + + if ( + sci_base_state_machine_get_state(&this_device->parent.state_machine) + != SCI_BASE_REMOTE_DEVICE_STATE_READY + ) { + sci_base_state_machine_change_state( + &this_device->parent.state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY + ); + } +} + +/** + * + * @device: This parameter specifies the device for which the request is being + * started. + * @request: This parameter specifies the request being started. + * @status: This parameter specifies the current start operation status. + * + * This method will perform the STP request start processing common to IO + * requests and task requests of all types. none + */ +void scic_sds_remote_device_start_request( + struct scic_sds_remote_device *this_device, + struct scic_sds_request *the_request, + enum sci_status status) +{ + /* We still have a fault in starting the io complete it on the port */ + if (status == SCI_SUCCESS) + scic_sds_remote_device_increment_request_count(this_device); + else{ + this_device->owning_port->state_handlers->complete_io_handler( + this_device->owning_port, this_device, the_request + ); + } +} + + +/** + * + * @request: This parameter specifies the request being continued. + * + * This method will continue to post tc for a STP request. This method usually + * serves as a callback when RNC gets resumed during a task management + * sequence. none + */ +void scic_sds_remote_device_continue_request( + struct scic_sds_remote_device *this_device) +{ + /* we need to check if this request is still valid to continue. */ + if (this_device->working_request != NULL) { + struct scic_sds_request *this_request = this_device->working_request; + struct scic_sds_controller *scic = this_request->owning_controller; + u32 state = scic->parent.state_machine.current_state_id; + sci_base_controller_request_handler_t continue_io; + + continue_io = scic_sds_controller_state_handler_table[state].base.continue_io; + continue_io(&scic->parent, &this_request->target_device->parent, + &this_request->parent); + } +} + +/** + * + * @user_parameter: This is cast to a remote device object. + * + * This method is called once the remote node context has reached a suspended + * state. The remote device can now report that its suspend operation is + * complete. none + */ + +/** + * This method will terminate all of the IO requests in the controllers IO + * request table that were targeted for this device. + * @this_device: This parameter specifies the remote device for which to + * attempt to terminate all requests. + * + * This method returns an indication as to whether all requests were + * successfully terminated. If a single request fails to be terminated, then + * this method will return the failure. + */ +static enum sci_status scic_sds_remote_device_terminate_requests( + struct scic_sds_remote_device *this_device) +{ + enum sci_status status = SCI_SUCCESS; + enum sci_status terminate_status = SCI_SUCCESS; + struct scic_sds_request *the_request; + u32 index; + u32 request_count = this_device->started_request_count; + + for (index = 0; + (index < SCI_MAX_IO_REQUESTS) && (request_count > 0); + index++) { + the_request = this_device->owning_port->owning_controller->io_request_table[index]; + + if ((the_request != NULL) && (the_request->target_device == this_device)) { + terminate_status = scic_controller_terminate_request( + this_device->owning_port->owning_controller, + this_device, + the_request + ); + + if (terminate_status != SCI_SUCCESS) + status = terminate_status; + + request_count--; + } + } + + return status; +} + +/* + * ***************************************************************************** + * * DEFAULT STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * + * This method is the default start handler. It logs a warning and returns a + * failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_start_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to start while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + sds_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * + * This method is the default stop handler. It logs a warning and returns a + * failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_remote_device_default_stop_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to stop while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + sds_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * + * This method is the default fail handler. It logs a warning and returns a + * failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_fail_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to fail while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + sds_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * + * This method is the default destruct handler. It logs a warning and returns + * a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_destruct_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to destroy while in " + "wrong state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + sds_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * + * This method is the default reset handler. It logs a warning and returns a + * failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_reset_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to reset while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + sds_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * + * This method is the default reset complete handler. It logs a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_reset_complete_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to complete reset while " + "in wrong state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + sds_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * + * This method is the default suspend handler. It logs a warning and returns a + * failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_suspend_handler( + struct scic_sds_remote_device *this_device, + u32 suspend_type) +{ + dev_warn(scirdev_to_dev(this_device), + "%s: SCIC Remote Device 0x%p requested to suspend %d while " + "in wrong state %d\n", + __func__, + this_device, + suspend_type, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + this_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * + * This method is the default resume handler. It logs a warning and returns a + * failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_resume_handler( + struct scic_sds_remote_device *this_device) +{ + dev_warn(scirdev_to_dev(this_device), + "%s: SCIC Remote Device requested to resume while in " + "wrong state %d\n", + __func__, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + this_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @event_code: The event code that the struct scic_sds_controller wants the device + * object to process. + * + * This method is the default event handler. It will call the RNC state + * machine handler for any RNC events otherwise it will log a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_remote_device_core_event_handler( + struct scic_sds_remote_device *this_device, + u32 event_code, + bool is_ready_state) +{ + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_OPS_MISC: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + status = scic_sds_remote_node_context_event_handler(this_device->rnc, event_code); + break; + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + + if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { + status = SCI_SUCCESS; + + /* Suspend the associated RNC */ + scic_sds_remote_node_context_suspend(this_device->rnc, + SCI_SOFTWARE_SUSPENSION, + NULL, NULL); + + dev_dbg(scirdev_to_dev(this_device), + "%s: device: %p event code: %x: %s\n", + __func__, this_device, event_code, + (is_ready_state) + ? "I_T_Nexus_Timeout event" + : "I_T_Nexus_Timeout event in wrong state"); + + break; + } + /* Else, fall through and treat as unhandled... */ + + default: + dev_dbg(scirdev_to_dev(this_device), + "%s: device: %p event code: %x: %s\n", + __func__, this_device, event_code, + (is_ready_state) + ? "unexpected event" + : "unexpected event in wrong state"); + status = SCI_FAILURE_INVALID_STATE; + break; + } + + return status; +} +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @event_code: The event code that the struct scic_sds_controller wants the device + * object to process. + * + * This method is the default event handler. It will call the RNC state + * machine handler for any RNC events otherwise it will log a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_remote_device_default_event_handler( + struct scic_sds_remote_device *this_device, + u32 event_code) +{ + return scic_sds_remote_device_core_event_handler(this_device, + event_code, + false); +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @frame_index: The frame index for which the struct scic_sds_controller wants this + * device object to process. + * + * This method is the default unsolicited frame handler. It logs a warning, + * releases the frame and returns a failure. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index) +{ + dev_warn(scirdev_to_dev(this_device), + "%s: SCIC Remote Device requested to handle frame %x " + "while in wrong state %d\n", + __func__, + frame_index, + sci_base_state_machine_get_state( + &this_device->parent.state_machine)); + + /* Return the frame back to the controller */ + scic_sds_controller_release_frame( + scic_sds_remote_device_get_controller(this_device), frame_index + ); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @request: The struct sci_base_request which is then cast into a SCIC_SDS_IO_REQUEST + * to start. + * + * This method is the default start io handler. It logs a warning and returns + * a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_start_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to start io request %p " + "while in wrong state %d\n", + __func__, + request, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + (struct scic_sds_remote_device *)device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @request: The struct sci_base_request which is then cast into a SCIC_SDS_IO_REQUEST + * to complete. + * + * This method is the default complete io handler. It logs a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_complete_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to complete io_request %p " + "while in wrong state %d\n", + __func__, + request, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + sds_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @request: The struct sci_base_request which is then cast into a SCIC_SDS_IO_REQUEST + * to continue. + * + * This method is the default continue io handler. It logs a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_continue_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + struct scic_sds_remote_device *sds_device = + (struct scic_sds_remote_device *)device; + + dev_warn(scirdev_to_dev(sds_device), + "%s: SCIC Remote Device requested to continue io request %p " + "while in wrong state %d\n", + __func__, + request, + sci_base_state_machine_get_state( + scic_sds_remote_device_get_base_state_machine( + sds_device))); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @request: The struct sci_base_request which is then cast into a SCIC_SDS_IO_REQUEST + * to complete. + * + * This method is the default complete task handler. It logs a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ + +/* + * ***************************************************************************** + * * NORMAL STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @device: The struct sci_base_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @frame_index: The frame index for which the struct scic_sds_controller wants this + * device object to process. + * + * This method is a general ssp frame handler. In most cases the device object + * needs to route the unsolicited frame processing to the io request object. + * This method decodes the tag for the io request object and routes the + * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_general_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index) +{ + enum sci_status result; + struct sci_ssp_frame_header *frame_header; + struct scic_sds_request *io_request; + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_remote_device_get_controller(this_device)->uf_control), + frame_index, + (void **)&frame_header + ); + + if (SCI_SUCCESS == result) { + io_request = scic_sds_controller_get_io_request_from_tag( + scic_sds_remote_device_get_controller(this_device), frame_header->tag); + + if ((io_request == SCI_INVALID_HANDLE) + || (io_request->target_device != this_device)) { + /* + * We could not map this tag to a valid IO request + * Just toss the frame and continue */ + scic_sds_controller_release_frame( + scic_sds_remote_device_get_controller(this_device), frame_index + ); + } else { + /* The IO request is now in charge of releasing the frame */ + result = io_request->state_handlers->frame_handler( + io_request, frame_index); + } + } + + return result; +} + +/** + * + * @[in]: this_device This is the device object that is receiving the event. + * @[in]: event_code The event code to process. + * + * This is a common method for handling events reported to the remote device + * from the controller object. enum sci_status + */ +enum sci_status scic_sds_remote_device_general_event_handler( + struct scic_sds_remote_device *this_device, + u32 event_code) +{ + return scic_sds_remote_device_core_event_handler(this_device, + event_code, + true); +} + +/* + * ***************************************************************************** + * * STOPPED STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @device: + * + * This method takes the struct scic_sds_remote_device from a stopped state and + * attempts to start it. The RNC buffer for the device is constructed and the + * device state machine is transitioned to the + * SCIC_BASE_REMOTE_DEVICE_STATE_STARTING. enum sci_status SCI_SUCCESS if there is + * an RNC buffer available to construct the remote device. + * SCI_FAILURE_INSUFFICIENT_RESOURCES if there is no RNC buffer available in + * which to construct the remote device. + */ +static enum sci_status scic_sds_remote_device_stopped_state_start_handler( + struct sci_base_remote_device *device) +{ + enum sci_status status; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + + status = scic_sds_remote_node_context_resume( + this_device->rnc, + scic_sds_remote_device_resume_complete_handler, + this_device + ); + + if (status == SCI_SUCCESS) { + sci_base_state_machine_change_state( + scic_sds_remote_device_get_base_state_machine(this_device), + SCI_BASE_REMOTE_DEVICE_STATE_STARTING + ); + } + + return status; +} + +/** + * + * @this_device: The struct sci_base_remote_device which is cast into a + * struct scic_sds_remote_device. + * + * This method will stop a struct scic_sds_remote_device that is already in a stopped + * state. This is not considered an error since the device is already stopped. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( + struct sci_base_remote_device *this_device) +{ + return SCI_SUCCESS; +} + +/** + * + * @this_device: The struct sci_base_remote_device which is cast into a + * struct scic_sds_remote_device. + * + * This method will destruct a struct scic_sds_remote_device that is in a stopped + * state. This is the only state from which a destruct request will succeed. + * The RNi for this struct scic_sds_remote_device is returned to the free pool and the + * device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + + scic_sds_controller_free_remote_node_context( + scic_sds_remote_device_get_controller(this_device), + this_device, + this_device->rnc->remote_node_index + ); + + scic_sds_remote_node_context_set_remote_node_index( + this_device->rnc, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX + ); + + scic_sds_port_set_direct_attached_device_id( + this_device->owning_port, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX + ); + + sci_base_state_machine_change_state( + scic_sds_remote_device_get_base_state_machine(this_device), + SCI_BASE_REMOTE_DEVICE_STATE_FINAL + ); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * STARTING STATE HANDLERS + * ***************************************************************************** */ + +static enum sci_status scic_sds_remote_device_starting_state_stop_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + + /* + * This device has not yet started so there had better be no IO requests + */ + BUG_ON(this_device->started_request_count != 0); + + /* + * Destroy the remote node context + */ + scic_sds_remote_node_context_destruct( + this_device->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, + this_device + ); + + /* + * Transition to the stopping state and wait for the remote node to + * complete being posted and invalidated. + */ + sci_base_state_machine_change_state( + scic_sds_remote_device_get_base_state_machine(this_device), + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * INITIALIZING STATE HANDLERS + * ***************************************************************************** */ + +/* There is nothing to do here for SSP devices */ + +/* + * ***************************************************************************** + * * READY STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @this_device: The struct scic_sds_remote_device object to be suspended. + * + * This method is the resume handler for the struct scic_sds_remote_device object. It + * will post an RNC resume to the SCU hardware. enum sci_status SCI_SUCCESS + */ + +/** + * + * @device: The struct sci_base_remote_device object which is cast to a + * struct scic_sds_remote_device object. + * + * This method is the default stop handler for the struct scic_sds_remote_device ready + * substate machine. It will stop the current substate machine and transition + * the base state machine to SCI_BASE_REMOTE_DEVICE_STATE_STOPPING. enum sci_status + * SCI_SUCCESS + */ +enum sci_status scic_sds_remote_device_ready_state_stop_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + enum sci_status status = SCI_SUCCESS; + + /* Request the parent state machine to transition to the stopping state */ + sci_base_state_machine_change_state( + scic_sds_remote_device_get_base_state_machine(this_device), + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING + ); + + if (this_device->started_request_count == 0) { + scic_sds_remote_node_context_destruct( + this_device->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, + this_device + ); + } else + status = scic_sds_remote_device_terminate_requests(this_device); + + return status; +} + +/** + * + * @device: The struct sci_base_remote_device object which is cast to a + * struct scic_sds_remote_device object. + * + * This is the ready state device reset handler enum sci_status + */ +enum sci_status scic_sds_remote_device_ready_state_reset_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + + /* Request the parent state machine to transition to the stopping state */ + sci_base_state_machine_change_state( + scic_sds_remote_device_get_base_state_machine(this_device), + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING + ); + + return SCI_SUCCESS; +} + +/** + * + * @device: The struct sci_base_remote_device object which is cast to a + * struct scic_sds_remote_device object. + * + * This is the default fail handler for the struct scic_sds_remote_device ready + * substate machine. It will stop the current ready substate and transition + * the remote device object to the SCI_BASE_REMOTE_DEVICE_STATE_FAILED. + * enum sci_status SCI_SUCCESS + */ + +/** + * + * @device: The struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device for which the request is to be started. + * @request: The struct sci_base_request which is cast to a SCIC_SDS_IO_REQUEST that + * is to be started. + * + * This method will attempt to start a task request for this device object. The + * remote device object will issue the start request for the task and if + * successful it will start the request for the port object then increment its + * own requet count. enum sci_status SCI_SUCCESS if the task request is started for + * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request + * object could not get the resources to start. + */ +static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status result; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *task_request = (struct scic_sds_request *)request; + + /* See if the port is in a state where we can start the IO request */ + result = scic_sds_port_start_io( + scic_sds_remote_device_get_port(this_device), this_device, task_request); + + if (result == SCI_SUCCESS) { + result = scic_sds_remote_node_context_start_task( + this_device->rnc, task_request + ); + + if (result == SCI_SUCCESS) { + result = scic_sds_request_start(task_request); + } + + scic_sds_remote_device_start_request(this_device, task_request, result); + } + + return result; +} + +/** + * + * @device: The struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device for which the request is to be started. + * @request: The struct sci_base_request which is cast to a SCIC_SDS_IO_REQUEST that + * is to be started. + * + * This method will attempt to start an io request for this device object. The + * remote device object will issue the start request for the io and if + * successful it will start the request for the port object then increment its + * own requet count. enum sci_status SCI_SUCCESS if the io request is started for + * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request + * object could not get the resources to start. + */ +static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status result; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *io_request = (struct scic_sds_request *)request; + + /* See if the port is in a state where we can start the IO request */ + result = scic_sds_port_start_io( + scic_sds_remote_device_get_port(this_device), this_device, io_request); + + if (result == SCI_SUCCESS) { + result = scic_sds_remote_node_context_start_io( + this_device->rnc, io_request + ); + + if (result == SCI_SUCCESS) { + result = scic_sds_request_start(io_request); + } + + scic_sds_remote_device_start_request(this_device, io_request, result); + } + + return result; +} + +/** + * + * @device: The struct sci_base_remote_device which is cast to a + * struct scic_sds_remote_device for which the request is to be completed. + * @request: The struct sci_base_request which is cast to a SCIC_SDS_IO_REQUEST that + * is to be completed. + * + * This method will complete the request for the remote device object. The + * method will call the completion handler for the request object and if + * successful it will complete the request on the port object then decrement + * its own started_request_count. enum sci_status + */ +static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status result; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *the_request = (struct scic_sds_request *)request; + + result = scic_sds_request_complete(the_request); + + if (result == SCI_SUCCESS) { + /* See if the port is in a state where we can start the IO request */ + result = scic_sds_port_complete_io( + scic_sds_remote_device_get_port(this_device), this_device, the_request); + + if (result == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(this_device); + } + } + + return result; +} + +/* + * ***************************************************************************** + * * STOPPING STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @this_device: The struct sci_base_remote_device which is cast into a + * struct scic_sds_remote_device. + * + * This method will stop a struct scic_sds_remote_device that is already in the + * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error + * since we allow a stop request on a device that is alreay stopping or + * stopped. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( + struct sci_base_remote_device *device) +{ + /* + * All requests should have been terminated, but if there is an + * attempt to stop a device already in the stopping state, then + * try again to terminate. */ + return scic_sds_remote_device_terminate_requests( + (struct scic_sds_remote_device *)device); +} + + +/** + * + * @device: The device object for which the request is completing. + * @request: The task request that is being completed. + * + * This method completes requests for this struct scic_sds_remote_device while it is + * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the + * complete method for the request object and if that is successful the port + * object is called to complete the task request. Then the device object itself + * completes the task request. If struct scic_sds_remote_device started_request_count + * goes to 0 and the invalidate RNC request has completed the device object can + * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status + */ +static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status status = SCI_SUCCESS; + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + + status = scic_sds_request_complete(this_request); + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + scic_sds_remote_device_get_port(this_device), + this_device, + this_request + ); + + if (status == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(this_device); + + if (scic_sds_remote_device_get_request_count(this_device) == 0) { + scic_sds_remote_node_context_destruct( + this_device->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, + this_device + ); + } + } + } + + return status; +} + +/* + * ***************************************************************************** + * * RESETTING STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @device: The struct sci_base_remote_device which is to be cast into a + * struct scic_sds_remote_device object. + * + * This method will complete the reset operation when the device is in the + * resetting state. enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + + sci_base_state_machine_change_state( + &this_device->parent.state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY + ); + + return SCI_SUCCESS; +} + +/** + * + * @device: The struct sci_base_remote_device which is to be cast into a + * struct scic_sds_remote_device object. + * + * This method will stop the remote device while in the resetting state. + * enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( + struct sci_base_remote_device *device) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + + sci_base_state_machine_change_state( + &this_device->parent.state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/** + * + * @device: The device object for which the request is completing. + * @request: The task request that is being completed. + * + * This method completes requests for this struct scic_sds_remote_device while it is + * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the + * complete method for the request object and if that is successful the port + * object is called to complete the task request. Then the device object itself + * completes the task request. enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status status = SCI_SUCCESS; + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + + status = scic_sds_request_complete(this_request); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + scic_sds_remote_device_get_port(this_device), this_device, this_request); + + if (status == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(this_device); + } + } + + return status; +} + +/* + * ***************************************************************************** + * * FAILED STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @device: The struct sci_base_remote_device which is to be cast into a + * struct scic_sds_remote_device object. + * + * This method handles the remove request for a failed struct scic_sds_remote_device + * object. The method will transition the device object to the + * SCIC_BASE_REMOTE_DEVICE_STATE_STOPPING. enum sci_status SCI_SUCCESS + */ + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_remote_device_state_handler +scic_sds_remote_device_state_handler_table[SCI_BASE_REMOTE_DEVICE_MAX_STATES] = +{ + /* SCI_BASE_REMOTE_DEVICE_STATE_INITIAL */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_default_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_default_event_handler, + scic_sds_remote_device_default_frame_handler + }, + /* SCI_BASE_REMOTE_DEVICE_STATE_STOPPED */ + { + { + scic_sds_remote_device_stopped_state_start_handler, + scic_sds_remote_device_stopped_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_stopped_state_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_default_event_handler, + scic_sds_remote_device_default_frame_handler + }, + /* SCI_BASE_REMOTE_DEVICE_STATE_STARTING */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_starting_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_remote_device_default_frame_handler + }, + /* SCI_BASE_REMOTE_DEVICE_STATE_READY */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_ready_state_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_ready_state_start_io_handler, + scic_sds_remote_device_ready_state_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_ready_state_start_task_handler, + scic_sds_remote_device_ready_state_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_remote_device_general_frame_handler, + }, + /* SCI_BASE_REMOTE_DEVICE_STATE_STOPPING */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_stopping_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_stopping_state_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_stopping_state_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_remote_device_general_frame_handler + }, + /* SCI_BASE_REMOTE_DEVICE_STATE_FAILED */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_default_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_default_event_handler, + scic_sds_remote_device_general_frame_handler + }, + /* SCI_BASE_REMOTE_DEVICE_STATE_RESETTING */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_resetting_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_resetting_state_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_resetting_state_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_resetting_state_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_default_event_handler, + scic_sds_remote_device_general_frame_handler + }, + /* SCI_BASE_REMOTE_DEVICE_STATE_FINAL */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_default_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_default_event_handler, + scic_sds_remote_device_default_frame_handler + } +}; + +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the operations that are taken on the enter and exit state + * transitions for the struct sci_base_remote_device state machine. + * + * + */ + +#include "scic_remote_device.h" +#include "scic_user_callback.h" +#include "scic_sds_controller.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_request.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it + * immediatly transitions the remote device object to the stopped state. none + */ +static void scic_sds_remote_device_initial_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + this_device, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL + ); + + /* Initial state is a transitional state to the stopped state */ + sci_base_state_machine_change_state( + scic_sds_remote_device_get_base_state_machine(this_device), + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED + ); +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it + * sets the stopped state handlers and if this state is entered from the + * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING then the SCI User is informed that the + * device stop is complete. none + */ +static void scic_sds_remote_device_stopped_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + this_device, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED + ); + + /* + * If we are entering from the stopping state let the SCI User know that + * the stop operation has completed. */ + if (this_device->parent.state_machine.previous_state_id + == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) { + scic_cb_remote_device_stop_complete( + scic_sds_remote_device_get_controller(this_device), + this_device, + SCI_SUCCESS + ); + } +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it + * sets the starting state handlers, sets the device not ready, and posts the + * remote node context to the hardware. none + */ +static void scic_sds_remote_device_starting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_controller *the_controller; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + the_controller = scic_sds_remote_device_get_controller(this_device); + + SET_STATE_HANDLER( + this_device, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STARTING + ); + + scic_cb_remote_device_not_ready( + the_controller, + this_device, + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED + ); +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the exit method for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it + * reports that the device start is complete. none + */ +static void scic_sds_remote_device_starting_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + /* + * / @todo Check the device object for the proper return code for this + * / callback */ + scic_cb_remote_device_start_complete( + scic_sds_remote_device_get_controller(this_device), + this_device, + SCI_SUCCESS + ); +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_READY it sets + * the ready state handlers, and starts the ready substate machine. none + */ +static void scic_sds_remote_device_ready_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_controller *the_controller; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + the_controller = scic_sds_remote_device_get_controller(this_device); + + SET_STATE_HANDLER( + this_device, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_READY + ); + + the_controller->remote_device_sequence[this_device->rnc->remote_node_index]++; + + if (this_device->has_ready_substate_machine) { + sci_base_state_machine_start(&this_device->ready_substate_machine); + } else { + scic_cb_remote_device_ready(the_controller, this_device); + } +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the exit method for the SCI_BASE_REMOTE_DEVICE_STATE_READY it does + * nothing. none + */ +static void scic_sds_remote_device_ready_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_controller *the_controller; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + the_controller = scic_sds_remote_device_get_controller(this_device); + + if (this_device->has_ready_substate_machine) { + sci_base_state_machine_stop(&this_device->ready_substate_machine); + } else { + scic_cb_remote_device_not_ready( + the_controller, + this_device, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED + ); + } +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING it + * sets the stopping state handlers and posts an RNC invalidate request to the + * SCU hardware. none + */ +static void scic_sds_remote_device_stopping_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + this_device, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING + ); +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_FAILED it sets + * the stopping state handlers. none + */ +static void scic_sds_remote_device_failed_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + this_device, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_FAILED + ); +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING it + * sets the resetting state handlers. none + */ +static void scic_sds_remote_device_resetting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + this_device, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING + ); + + scic_sds_remote_node_context_suspend( + this_device->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the exit method for the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING it + * does nothing. none + */ +static void scic_sds_remote_device_resetting_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + scic_sds_port_set_direct_attached_device_id( + scic_sds_remote_device_get_port(this_device), + this_device->rnc->remote_node_index + ); + + scic_sds_remote_node_context_resume(this_device->rnc, NULL, NULL); +} + +/** + * + * @object: This is the struct sci_base_object that is cast into a + * struct scic_sds_remote_device. + * + * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_FINAL it sets + * the final state handlers. none + */ +static void scic_sds_remote_device_final_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + this_device, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_FINAL + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_remote_device_state_table[] = { + [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { + .enter_state = scic_sds_remote_device_initial_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { + .enter_state = scic_sds_remote_device_stopped_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { + .enter_state = scic_sds_remote_device_starting_state_enter, + .exit_state = scic_sds_remote_device_starting_state_exit + }, + [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { + .enter_state = scic_sds_remote_device_ready_state_enter, + .exit_state = scic_sds_remote_device_ready_state_exit + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { + .enter_state = scic_sds_remote_device_stopping_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { + .enter_state = scic_sds_remote_device_failed_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { + .enter_state = scic_sds_remote_device_resetting_state_enter, + .exit_state = scic_sds_remote_device_resetting_state_exit + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { + .enter_state = scic_sds_remote_device_final_state_enter, + }, +}; + diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h new file mode 100644 index 0000000..44185a2 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -0,0 +1,602 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_DEVICE_H_ +#define _SCIC_SDS_REMOTE_DEVICE_H_ + +/** + * This file contains the structures, constants, and prototypes for the + * struct scic_sds_remote_device object. + * + * + */ + +#include "intel_sas.h" +#include "sci_base_remote_device.h" +#include "sci_base_request.h" +#include "scu_remote_node_context.h" +#include "scic_sds_remote_node_context.h" + +struct scic_sds_controller; +struct scic_sds_port; +struct scic_sds_request; +struct scic_sds_remote_device_state_handler; + +/** + * enum SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATES - + * + * This is the enumeration of the ready substates for the + * struct scic_sds_remote_device. + */ +enum SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATES { + /** + * This is the initial state for the remote device ready substate. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL, + + /** + * This is the ready operational substate for the remote device. This is the + * normal operational state for a remote device. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL, + + /** + * This is the suspended state for the remote device. This is the state that + * the device is placed in when a RNC suspend is received by the SCU hardware. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED, + + /** + * This is the final state that the device is placed in before a change to the + * base state machine. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL, + + SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES +}; + +/** + * enum SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATES - + * + * This is the enumeration for the struct scic_sds_remote_device ready substates for + * the STP remote device. + */ +enum SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATES { + /** + * This is the idle substate for the stp remote device. When there are no + * active IO for the device it is is in this state. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, + + /** + * This is the command state for for the STP remote device. This state is + * entered when the device is processing a non-NCQ command. The device object + * will fail any new start IO requests until this command is complete. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD, + + /** + * This is the NCQ state for the STP remote device. This state is entered + * when the device is processing an NCQ reuqest. It will remain in this state + * so long as there is one or more NCQ requests being processed. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ, + + /** + * This is the NCQ error state for the STP remote device. This state is + * entered when an SDB error FIS is received by the device object while in the + * NCQ state. The device object will only accept a READ LOG command while in + * this state. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR, + +#if !defined(DISABLE_ATAPI) + /** + * This is the ATAPI error state for the STP ATAPI remote device. This state is + * entered when ATAPI device sends error status FIS without data while the device + * object is in CMD state. A suspension event is expected in this state. The device + * object will resume right away. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR, +#endif + + /** + * This is the READY substate indicates the device is waiting for the RESET task + * coming to be recovered from certain hardware specific error. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET, + + SCIC_SDS_STP_REMOTE_DEVICE_READY_MAX_SUBSTATES +}; + + +/** + * enum SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATES - + * + * This is the enumeration of the ready substates for the SMP REMOTE DEVICE. + */ + +enum SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATES { + /** + * This is the ready operational substate for the remote device. This is the + * normal operational state for a remote device. + */ + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, + + /** + * This is the suspended state for the remote device. This is the state that + * the device is placed in when a RNC suspend is received by the SCU hardware. + */ + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD, + + SCIC_SDS_SMP_REMOTE_DEVICE_READY_MAX_SUBSTATES +}; + + + + +/** + * struct scic_sds_remote_device - This structure contains the data for an SCU + * implementation of the SCU Core device data. + * + * + */ +struct scic_sds_remote_device { + /** + * This field is the common base for all remote device objects. + */ + struct sci_base_remote_device parent; + + /** + * This field is the programmed device port width. This value is written to + * the RCN data structure to tell the SCU how many open connections this + * device can have. + */ + u32 device_port_width; + + /** + * This field is the programmed connection rate for this remote device. It is + * used to program the TC with the maximum allowed connection rate. + */ + enum sci_sas_link_rate connection_rate; + + /** + * This field contains the allowed target protocols for this remote device. + */ + struct smp_discover_response_protocols target_protocols; + + /** + * This field contains the device SAS address. + */ + struct sci_sas_address device_address; + + /** + * This filed is assinged the value of true if the device is directly attached + * to the port. + */ + bool is_direct_attached; + +#if !defined(DISABLE_ATAPI) + /** + * This filed is assinged the value of true if the device is an ATAPI device. + */ + bool is_atapi; +#endif + + /** + * This filed contains a pointer back to the port to which this device is + * assigned. + */ + struct scic_sds_port *owning_port; + + /** + * This field contains the SCU silicon remote node context specific + * information. + */ + struct scic_sds_remote_node_context *rnc; + + /** + * This field contains the stated request count for the remote device. The + * device can not reach the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED until all + * requests are complete and the rnc_posted value is false. + */ + u32 started_request_count; + + /** + * This field contains a pointer to the working request object. It is only + * used only for SATA requests since the unsolicited frames we get from the + * hardware have no Tag value to look up the io request object. + */ + struct scic_sds_request *working_request; + + /** + * This field contains the reason for the remote device going not_ready. It is + * assigned in the state handlers and used in the state transition. + */ + u32 not_ready_reason; + + /** + * This field is true if this remote device has an initialzied ready substate + * machine. SSP devices do not have a ready substate machine and STP devices + * have a ready substate machine. + */ + bool has_ready_substate_machine; + + /** + * This field contains the state machine for the ready substate machine for + * this struct scic_sds_remote_device object. + */ + struct sci_base_state_machine ready_substate_machine; + + /** + * This field maintains the set of state handlers for the remote device + * object. These are changed each time the remote device enters a new state. + */ + struct scic_sds_remote_device_state_handler *state_handlers; +}; + + +typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_HANDLER_T)( + struct scic_sds_remote_device *this_device); + +typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_SUSPEND_HANDLER_T)( + struct scic_sds_remote_device *this_device, + u32 suspend_type); + +typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_RESUME_HANDLER_T)( + struct scic_sds_remote_device *this_device); + +typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_FRAME_HANDLER_T)( + struct scic_sds_remote_device *this_device, + u32 frame_index); + +typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_EVENT_HANDLER_T)( + struct scic_sds_remote_device *this_device, + u32 event_code); + +typedef void (*SCIC_SDS_REMOTE_DEVICE_READY_NOT_READY_HANDLER_T)( + struct scic_sds_remote_device *this_device); + +/** + * struct scic_sds_remote_device_state_handler - This structure conains the + * state handlers that are needed to process requests for the SCU remote + * device objects. + * + * + */ +struct scic_sds_remote_device_state_handler { + struct sci_base_remote_device_state_handler parent; + + SCIC_SDS_REMOTE_DEVICE_SUSPEND_HANDLER_T suspend_handler; + SCIC_SDS_REMOTE_DEVICE_RESUME_HANDLER_T resume_handler; + + SCIC_SDS_REMOTE_DEVICE_EVENT_HANDLER_T event_handler; + SCIC_SDS_REMOTE_DEVICE_FRAME_HANDLER_T frame_handler; + +}; + + +extern const struct sci_base_state scic_sds_remote_device_state_table[]; +extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[]; +extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[]; +extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; + +extern struct scic_sds_remote_device_state_handler + scic_sds_remote_device_state_handler_table[]; +extern struct scic_sds_remote_device_state_handler + scic_sds_ssp_remote_device_ready_substate_handler_table[]; +extern struct scic_sds_remote_device_state_handler + scic_sds_stp_remote_device_ready_substate_handler_table[]; +extern struct scic_sds_remote_device_state_handler + scic_sds_smp_remote_device_ready_substate_handler_table[]; + +/** + * scic_sds_remote_device_increment_request_count() - + * + * This macro incrments the request count for this device + */ +#define scic_sds_remote_device_increment_request_count(this_device) \ + ((this_device)->started_request_count++) + +/** + * scic_sds_remote_device_decrement_request_count() - + * + * This macro decrements the request count for this device. This count will + * never decrment past 0. + */ +#define scic_sds_remote_device_decrement_request_count(this_device) \ + ((this_device)->started_request_count > 0 ? \ + (this_device)->started_request_count-- : 0) + +/** + * scic_sds_remote_device_get_request_count() - + * + * This is a helper macro to return the current device request count. + */ +#define scic_sds_remote_device_get_request_count(this_device) \ + ((this_device)->started_request_count) + +/** + * scic_sds_remote_device_get_port() - + * + * This macro returns the owning port of this remote device obejct. + */ +#define scic_sds_remote_device_get_port(this_device) \ + ((this_device)->owning_port) + +/** + * scic_sds_remote_device_get_controller() - + * + * This macro returns the controller object that contains this device object + */ +#define scic_sds_remote_device_get_controller(this_device) \ + scic_sds_port_get_controller(scic_sds_remote_device_get_port(this_device)) + +/** + * scic_sds_remote_device_set_state_handlers() - + * + * This macro sets the remote device state handlers pointer and is set on entry + * to each device state. + */ +#define scic_sds_remote_device_set_state_handlers(this_device, handlers) \ + ((this_device)->state_handlers = (handlers)) + +/** + * scic_sds_remote_device_get_base_state_machine() - + * + * This macro returns the base sate machine object for the remote device. + */ +#define scic_sds_remote_device_get_base_state_machine(this_device) \ + (&(this_device)->parent.state_machine) + +/** + * scic_sds_remote_device_get_ready_substate_machine() - + * + * This macro returns the remote device ready substate machine + */ +#define scic_sds_remote_device_get_ready_substate_machine(this_device) \ + (&(this_device)->ready_substate_machine) + +/** + * scic_sds_remote_device_get_port() - + * + * This macro returns the owning port of this device + */ +#define scic_sds_remote_device_get_port(this_device) \ + ((this_device)->owning_port) + +/** + * scic_sds_remote_device_get_sequence() - + * + * This macro returns the remote device sequence value + */ +#define scic_sds_remote_device_get_sequence(this_device) \ + (\ + scic_sds_remote_device_get_controller(this_device)-> \ + remote_device_sequence[(this_device)->rnc->remote_node_index] \ + ) + +/** + * scic_sds_remote_device_get_controller_peg() - + * + * This macro returns the controllers protocol engine group + */ +#define scic_sds_remote_device_get_controller_peg(this_device) \ + (\ + scic_sds_controller_get_protocol_engine_group(\ + scic_sds_port_get_controller(\ + scic_sds_remote_device_get_port(this_device) \ + ) \ + ) \ + ) + +/** + * scic_sds_remote_device_get_port_index() - + * + * This macro returns the port index for the devices owning port + */ +#define scic_sds_remote_device_get_port_index(this_device) \ + (scic_sds_port_get_index(scic_sds_remote_device_get_port(this_device))) + +/** + * scic_sds_remote_device_get_index() - + * + * This macro returns the remote node index for this device object + */ +#define scic_sds_remote_device_get_index(this_device) \ + ((this_device)->rnc->remote_node_index) + +/** + * scic_sds_remote_device_build_command_context() - + * + * This macro builds a remote device context for the SCU post request operation + */ +#define scic_sds_remote_device_build_command_context(device, command) \ + ((command) \ + | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ + | (scic_sds_remote_device_get_port_index((device)) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ + | (scic_sds_remote_device_get_index((device))) \ + ) + +/** + * scic_sds_remote_device_set_working_request() - + * + * This macro makes the working request assingment for the remote device + * object. To clear the working request use this macro with a NULL request + * object. + */ +#define scic_sds_remote_device_set_working_request(device, request) \ + ((device)->working_request = (request)) + +/* --------------------------------------------------------------------------- */ + + + +enum sci_status scic_sds_remote_device_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index); + +enum sci_status scic_sds_remote_device_event_handler( + struct scic_sds_remote_device *this_device, + u32 event_code); + +enum sci_status scic_sds_remote_device_start_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *this_device, + struct scic_sds_request *io_request); + +enum sci_status scic_sds_remote_device_complete_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *this_device, + struct scic_sds_request *io_request); + +enum sci_status scic_sds_remote_device_resume( + struct scic_sds_remote_device *this_device); + +enum sci_status scic_sds_remote_device_suspend( + struct scic_sds_remote_device *this_device, + u32 suspend_type); + +enum sci_status scic_sds_remote_device_start_task( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *this_device, + struct scic_sds_request *io_request); + +void scic_sds_remote_device_post_request( + struct scic_sds_remote_device *this_device, + u32 request); + +#if !defined(DISABLE_ATAPI) +bool scic_sds_remote_device_is_atapi( + struct scic_sds_remote_device *this_device); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_sds_remote_device_is_atapi(this_device) false +#endif /* !defined(DISABLE_ATAPI) */ + +/* --------------------------------------------------------------------------- */ + +/* --------------------------------------------------------------------------- */ + +void scic_sds_remote_device_start_request( + struct scic_sds_remote_device *this_device, + struct scic_sds_request *the_request, + enum sci_status status); + +void scic_sds_remote_device_continue_request( + struct scic_sds_remote_device *this_device); + +enum sci_status scic_sds_remote_device_default_start_handler( + struct sci_base_remote_device *this_device); + + +enum sci_status scic_sds_remote_device_default_fail_handler( + struct sci_base_remote_device *this_device); + +enum sci_status scic_sds_remote_device_default_destruct_handler( + struct sci_base_remote_device *this_device); + +enum sci_status scic_sds_remote_device_default_reset_handler( + struct sci_base_remote_device *device); + +enum sci_status scic_sds_remote_device_default_reset_complete_handler( + struct sci_base_remote_device *device); + +enum sci_status scic_sds_remote_device_default_start_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request); + +enum sci_status scic_sds_remote_device_default_complete_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request); + +enum sci_status scic_sds_remote_device_default_continue_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request); + +enum sci_status scic_sds_remote_device_default_suspend_handler( + struct scic_sds_remote_device *this_device, + u32 suspend_type); + +enum sci_status scic_sds_remote_device_default_resume_handler( + struct scic_sds_remote_device *this_device); + + +enum sci_status scic_sds_remote_device_default_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index); + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_sds_remote_device_ready_state_stop_handler( + struct sci_base_remote_device *device); + +enum sci_status scic_sds_remote_device_ready_state_reset_handler( + struct sci_base_remote_device *device); + +enum sci_status scic_sds_remote_device_general_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index); + +enum sci_status scic_sds_remote_device_general_event_handler( + struct scic_sds_remote_device *this_device, + u32 event_code); + +enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler( + struct scic_sds_remote_device *this_device); + +/* --------------------------------------------------------------------------- */ + + +#endif /* _SCIC_SDS_REMOTE_DEVICE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/core/scic_sds_remote_node_context.c new file mode 100644 index 0000000..79fe9a8 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.c @@ -0,0 +1,1244 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "sci_base_state_machine.h" +#include "scic_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_remote_node_context.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_event_codes.h" +#include "scu_task_context.h" + +void scic_sds_remote_node_context_construct( + struct scic_sds_remote_device *device, + struct scic_sds_remote_node_context *rnc, + u16 remote_node_index) +{ + memset(rnc, 0, sizeof(struct scic_sds_remote_node_context)); + + rnc->remote_node_index = remote_node_index; + rnc->device = device; + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + sci_base_state_machine_construct( + &rnc->state_machine, + &rnc->parent, + scic_sds_remote_node_context_state_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE + ); + + sci_base_state_machine_start(&rnc->state_machine); +} + +/** + * + * @this_rnc: The RNC for which the is posted request is being made. + * + * This method will return true if the RNC is not in the initial state. In all + * other states the RNC is considered active and this will return true. The + * destroy request of the state machine drives the RNC back to the initial + * state. If the state machine changes then this routine will also have to be + * changed. bool true if the state machine is not in the initial state false if + * the state machine is in the initial state + */ + +/** + * + * @this_rnc: The state of the remote node context object to check. + * + * This method will return true if the remote node context is in a READY state + * otherwise it will return false bool true if the remote node context is in + * the ready state. false if the remote node context is not in the ready state. + */ +bool scic_sds_remote_node_context_is_ready( + struct scic_sds_remote_node_context *this_rnc) +{ + u32 current_state = sci_base_state_machine_get_state(&this_rnc->state_machine); + + if (current_state == SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { + return true; + } + + return false; +} + +/** + * + * @this_device: The remote device to use to construct the RNC buffer. + * @rnc: The buffer into which the remote device data will be copied. + * + * This method will construct the RNC buffer for this remote device object. none + */ +void scic_sds_remote_node_context_construct_buffer( + struct scic_sds_remote_node_context *this_rnc) +{ + union scu_remote_node_context *rnc; + struct scic_sds_controller *the_controller; + + the_controller = scic_sds_remote_device_get_controller(this_rnc->device); + + rnc = scic_sds_controller_get_remote_node_context_buffer( + the_controller, this_rnc->remote_node_index); + + memset( + rnc, + 0x00, + sizeof(union scu_remote_node_context) + * scic_sds_remote_device_node_count(this_rnc->device) + ); + + rnc->ssp.remote_node_index = this_rnc->remote_node_index; + rnc->ssp.remote_node_port_width = this_rnc->device->device_port_width; + rnc->ssp.logical_port_index = + scic_sds_remote_device_get_port_index(this_rnc->device); + + rnc->ssp.remote_sas_address_hi = SCIC_SWAP_DWORD(this_rnc->device->device_address.high); + rnc->ssp.remote_sas_address_lo = SCIC_SWAP_DWORD(this_rnc->device->device_address.low); + + rnc->ssp.nexus_loss_timer_enable = true; + rnc->ssp.check_bit = false; + rnc->ssp.is_valid = false; + rnc->ssp.is_remote_node_context = true; + rnc->ssp.function_number = 0; + + rnc->ssp.arbitration_wait_time = 0; + + + if ( + this_rnc->device->target_protocols.u.bits.attached_sata_device + || this_rnc->device->target_protocols.u.bits.attached_stp_target + ) { + rnc->ssp.connection_occupancy_timeout = + the_controller->user_parameters.sds1.stp_max_occupancy_timeout; + rnc->ssp.connection_inactivity_timeout = + the_controller->user_parameters.sds1.stp_inactivity_timeout; + } else { + rnc->ssp.connection_occupancy_timeout = + the_controller->user_parameters.sds1.ssp_max_occupancy_timeout; + rnc->ssp.connection_inactivity_timeout = + the_controller->user_parameters.sds1.ssp_inactivity_timeout; + } + + rnc->ssp.initial_arbitration_wait_time = 0; + + /* Open Address Frame Parameters */ + rnc->ssp.oaf_connection_rate = this_rnc->device->connection_rate; + rnc->ssp.oaf_features = 0; + rnc->ssp.oaf_source_zone_group = 0; + rnc->ssp.oaf_more_compatibility_features = 0; +} + +/** + * + * @this_rnc: + * @the_callback: + * @callback_parameter: + * + * This method will setup the remote node context object so it will transition + * to its ready state. If the remote node context is already setup to + * transition to its final state then this function does nothing. none + */ +static void scic_sds_remote_node_context_setup_to_resume( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + if (this_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { + this_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY; + this_rnc->user_callback = the_callback; + this_rnc->user_cookie = callback_parameter; + } +} + +/** + * + * @this_rnc: + * @the_callback: + * @callback_parameter: + * + * This method will setup the remote node context object so it will transistion + * to its final state. none + */ +static void scic_sds_remote_node_context_setup_to_destory( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + this_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL; + this_rnc->user_callback = the_callback; + this_rnc->user_cookie = callback_parameter; +} + +/** + * + * @this_rnc: + * @the_callback: + * + * This method will continue to resume a remote node context. This is used in + * the states where a resume is requested while a resume is in progress. + */ +static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + if (this_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { + this_rnc->user_callback = the_callback; + this_rnc->user_cookie = callback_parameter; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_default_destruct_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to stop while " + "in unexpected state %d\n", + __func__, + this_rnc, + sci_base_state_machine_get_state(&this_rnc->state_machine)); + + /* + * We have decided that the destruct request on the remote node context can not fail + * since it is either in the initial/destroyed state or is can be destroyed. */ + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_remote_node_context_default_suspend_handler( + struct scic_sds_remote_node_context *this_rnc, + u32 suspend_type, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to suspend " + "while in wrong state %d\n", + __func__, + this_rnc, + sci_base_state_machine_get_state(&this_rnc->state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_remote_node_context_default_resume_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to resume " + "while in wrong state %d\n", + __func__, + this_rnc, + sci_base_state_machine_get_state(&this_rnc->state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_remote_node_context_default_start_io_handler( + struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_request *the_request) +{ + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to start io " + "0x%p while in wrong state %d\n", + __func__, + this_rnc, + the_request, + sci_base_state_machine_get_state(&this_rnc->state_machine)); + + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; +} + +static enum sci_status scic_sds_remote_node_context_default_start_task_handler( + struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_request *the_request) +{ + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to start " + "task 0x%p while in wrong state %d\n", + __func__, + this_rnc, + the_request, + sci_base_state_machine_get_state(&this_rnc->state_machine)); + + return SCI_FAILURE; +} + +static enum sci_status scic_sds_remote_node_context_default_event_handler( + struct scic_sds_remote_node_context *this_rnc, + u32 event_code) +{ + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to process " + "event 0x%x while in wrong state %d\n", + __func__, + this_rnc, + event_code, + sci_base_state_machine_get_state(&this_rnc->state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @this_rnc: The rnc for which the task request is targeted. + * @the_request: The request which is going to be started. + * + * This method determines if the task request can be started by the SCU + * hardware. When the RNC is in the ready state any task can be started. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_success_start_task_handler( + struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_request *the_request) +{ + return SCI_SUCCESS; +} + +/** + * + * @this_rnc: + * @the_callback: + * @callback_parameter: + * + * This method handles destruct calls from the various state handlers. The + * remote node context can be requested to destroy from any state. If there was + * a user callback it is always replaced with the request to destroy user + * callback. enum sci_status + */ +static enum sci_status scic_sds_remote_node_context_general_destruct_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + scic_sds_remote_node_context_setup_to_destory( + this_rnc, the_callback, callback_parameter + ); + + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE + ); + + return SCI_SUCCESS; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + if (this_rnc->remote_node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + scic_sds_remote_node_context_setup_to_resume( + this_rnc, the_callback, callback_parameter + ); + + scic_sds_remote_node_context_construct_buffer(this_rnc); + + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE + ); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( + struct scic_sds_remote_node_context *this_rnc, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_POST_RNC_COMPLETE: + status = SCI_SUCCESS; + + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE + ); + break; + + default: + status = SCI_FAILURE; + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to " + "process unexpected event 0x%x while in posting " + "state\n", + __func__, + this_rnc, + event_code); + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_invalidating_state_destruct_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + scic_sds_remote_node_context_setup_to_destory( + this_rnc, the_callback, callback_parameter + ); + + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_remote_node_context_invalidating_state_event_handler( + struct scic_sds_remote_node_context *this_rnc, + u32 event_code) +{ + enum sci_status status; + + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { + status = SCI_SUCCESS; + + if (this_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE + ); + } else { + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE + ); + } + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* + * We really dont care if the hardware is going to suspend + * the device since it's being invalidated anyway */ + dev_dbg(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being " + "invalidated.\n", + __func__, + this_rnc); + status = SCI_SUCCESS; + break; + + default: + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p " + "requested to process event 0x%x while " + "in state %d.\n", + __func__, + this_rnc, + event_code, + sci_base_state_machine_get_state( + &this_rnc->state_machine)); + status = SCI_FAILURE; + break; + } + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + + +static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler( + struct scic_sds_remote_node_context *this_rnc, + u32 event_code) +{ + enum sci_status status; + + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) { + status = SCI_SUCCESS; + + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE + ); + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* + * We really dont care if the hardware is going to suspend + * the device since it's being resumed anyway */ + dev_dbg(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being resumed.\n", + __func__, + this_rnc); + status = SCI_SUCCESS; + break; + + default: + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested " + "to process event 0x%x while in state %d.\n", + __func__, + this_rnc, + event_code, + sci_base_state_machine_get_state( + &this_rnc->state_machine)); + status = SCI_FAILURE; + break; + } + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +/** + * + * @this_rnc: The remote node context object being suspended. + * @the_callback: The callback when the suspension is complete. + * @callback_parameter: The parameter that is to be passed into the callback. + * + * This method will handle the suspend requests from the ready state. + * SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_ready_state_suspend_handler( + struct scic_sds_remote_node_context *this_rnc, + u32 suspend_type, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + this_rnc->user_callback = the_callback; + this_rnc->user_cookie = callback_parameter; + this_rnc->suspension_code = suspend_type; + + if (suspend_type == SCI_SOFTWARE_SUSPENSION) { + scic_sds_remote_device_post_request( + this_rnc->device, + SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX + ); + } + + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE + ); + + return SCI_SUCCESS; +} + +/** + * + * @this_rnc: The rnc for which the io request is targeted. + * @the_request: The request which is going to be started. + * + * This method determines if the io request can be started by the SCU hardware. + * When the RNC is in the ready state any io request can be started. enum sci_status + * SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_ready_state_start_io_handler( + struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_request *the_request) +{ + return SCI_SUCCESS; +} + + +static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( + struct scic_sds_remote_node_context *this_rnc, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE + ); + + this_rnc->suspension_code = scu_get_event_specifier(event_code); + status = SCI_SUCCESS; + break; + + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE + ); + + this_rnc->suspension_code = scu_get_event_specifier(event_code); + status = SCI_SUCCESS; + break; + + default: + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to " + "process event 0x%x while in state %d.\n", + __func__, + this_rnc, + event_code, + sci_base_state_machine_get_state( + &this_rnc->state_machine)); + + status = SCI_FAILURE; + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + enum sci_status status; + struct smp_discover_response_protocols protocols; + + scic_sds_remote_node_context_setup_to_resume( + this_rnc, the_callback, callback_parameter + ); + + /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ + + scic_remote_device_get_protocols(this_rnc->device, &protocols); + + if ( + (protocols.u.bits.attached_ssp_target == 1) + || (protocols.u.bits.attached_smp_target == 1) + ) { + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE + ); + + status = SCI_SUCCESS; + } else if (protocols.u.bits.attached_stp_target == 1) { + if (this_rnc->device->is_direct_attached) { + /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ + scic_sds_port_set_direct_attached_device_id( + this_rnc->device->owning_port, + this_rnc->remote_node_index + ); + + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE + ); + } else { + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE + ); + } + + status = SCI_SUCCESS; + } else { + status = SCI_FAILURE; + } + + return status; +} + +/** + * + * @this_rnc: The remote node context which is to receive the task request. + * @the_request: The task request to be transmitted to to the remote target + * device. + * + * This method will report a success or failure attempt to start a new task + * request to the hardware. Since all task requests are sent on the high + * priority queue they can be sent when the RCN is in a TX suspend state. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_suspended_start_task_handler( + struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_request *the_request) +{ + scic_sds_remote_node_context_resume(this_rnc, NULL, NULL); + + return SCI_SUCCESS; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + scic_sds_remote_node_context_setup_to_resume( + this_rnc, the_callback, callback_parameter + ); + + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE + ); + + return SCI_FAILURE_INVALID_STATE; +} + +/* --------------------------------------------------------------------------- */ + +/** + * + * + * + */ +static enum sci_status scic_sds_remote_node_context_await_suspension_state_resume_handler( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter) +{ + scic_sds_remote_node_context_setup_to_resume( + this_rnc, the_callback, callback_parameter + ); + + return SCI_SUCCESS; +} + +/** + * + * @this_rnc: The remote node context which is to receive the task request. + * @the_request: The task request to be transmitted to to the remote target + * device. + * + * This method will report a success or failure attempt to start a new task + * request to the hardware. Since all task requests are sent on the high + * priority queue they can be sent when the RCN is in a TX suspend state. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_await_suspension_state_start_task_handler( + struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_request *the_request) +{ + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_remote_node_context_await_suspension_state_event_handler( + struct scic_sds_remote_node_context *this_rnc, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE + ); + + this_rnc->suspension_code = scu_get_event_specifier(event_code); + status = SCI_SUCCESS; + break; + + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_base_state_machine_change_state( + &this_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE + ); + + this_rnc->suspension_code = scu_get_event_specifier(event_code); + status = SCI_SUCCESS; + break; + + default: + dev_warn(scirdev_to_dev(this_rnc->device), + "%s: SCIC Remote Node Context 0x%p requested to " + "process event 0x%x while in state %d.\n", + __func__, + this_rnc, + event_code, + sci_base_state_machine_get_state( + &this_rnc->state_machine)); + + status = SCI_FAILURE; + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_remote_node_context_handlers +scic_sds_remote_node_context_state_handler_table[ + SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES] = +{ + /* SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE */ + { + scic_sds_remote_node_context_default_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_initial_state_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_default_start_task_handler, + scic_sds_remote_node_context_default_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_continue_to_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_default_start_task_handler, + scic_sds_remote_node_context_posting_state_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE */ + { + scic_sds_remote_node_context_invalidating_state_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_continue_to_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_default_start_task_handler, + scic_sds_remote_node_context_invalidating_state_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_continue_to_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_success_start_task_handler, + scic_sds_remote_node_context_resuming_state_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_ready_state_suspend_handler, + scic_sds_remote_node_context_default_resume_handler, + scic_sds_remote_node_context_ready_state_start_io_handler, + scic_sds_remote_node_context_success_start_task_handler, + scic_sds_remote_node_context_ready_state_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_tx_suspended_state_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_suspended_start_task_handler, + scic_sds_remote_node_context_default_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_suspended_start_task_handler, + scic_sds_remote_node_context_default_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_await_suspension_state_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_await_suspension_state_start_task_handler, + scic_sds_remote_node_context_await_suspension_state_event_handler + } +}; + +/* + * ***************************************************************************** + * * REMOTE NODE CONTEXT PRIVATE METHODS + * ***************************************************************************** */ + +/** + * + * + * This method just calls the user callback function and then resets the + * callback. + */ +static void scic_sds_remote_node_context_notify_user( + struct scic_sds_remote_node_context *rnc) +{ + if (rnc->user_callback != NULL) { + (*rnc->user_callback)(rnc->user_cookie); + + rnc->user_callback = NULL; + rnc->user_cookie = NULL; + } +} + +/** + * + * + * This method will continue the remote node context state machine by + * requesting to resume the remote node context state machine from its current + * state. + */ +static void scic_sds_remote_node_context_continue_state_transitions( + struct scic_sds_remote_node_context *rnc) +{ + if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { + rnc->state_handlers->resume_handler( + rnc, rnc->user_callback, rnc->user_cookie + ); + } +} + +/** + * + * @this_rnc: The remote node context object that is to be validated. + * + * This method will mark the rnc buffer as being valid and post the request to + * the hardware. none + */ +static void scic_sds_remote_node_context_validate_context_buffer( + struct scic_sds_remote_node_context *this_rnc) +{ + union scu_remote_node_context *rnc_buffer; + + rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( + scic_sds_remote_device_get_controller(this_rnc->device), + this_rnc->remote_node_index + ); + + rnc_buffer->ssp.is_valid = true; + + if ( + !this_rnc->device->is_direct_attached + && this_rnc->device->target_protocols.u.bits.attached_stp_target + ) { + scic_sds_remote_device_post_request( + this_rnc->device, + SCU_CONTEXT_COMMAND_POST_RNC_96 + ); + } else { + scic_sds_remote_device_post_request( + this_rnc->device, + SCU_CONTEXT_COMMAND_POST_RNC_32 + ); + + if (this_rnc->device->is_direct_attached) { + scic_sds_port_set_direct_attached_device_id( + this_rnc->device->owning_port, + this_rnc->remote_node_index + ); + } + } +} + +/** + * + * @this_rnc: The remote node context object that is to be invalidated. + * + * This method will update the RNC buffer and post the invalidate request. none + */ +static void scic_sds_remote_node_context_invalidate_context_buffer( + struct scic_sds_remote_node_context *this_rnc) +{ + union scu_remote_node_context *rnc_buffer; + + rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( + scic_sds_remote_device_get_controller(this_rnc->device), + this_rnc->remote_node_index + ); + + rnc_buffer->ssp.is_valid = false; + + scic_sds_remote_device_post_request( + this_rnc->device, + SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE + ); + + if (this_rnc->device->is_direct_attached) { + scic_sds_port_set_direct_attached_device_id( + this_rnc->device->owning_port, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX + ); + } +} + +/* + * ***************************************************************************** + * * REMOTE NODE CONTEXT STATE ENTER AND EXIT METHODS + * ***************************************************************************** */ + +/** + * + * + * + */ +static void scic_sds_remote_node_context_initial_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE + ); + + /* + * Check to see if we have gotten back to the initial state because someone + * requested to destroy the remote node context object. */ + if ( + rnc->state_machine.previous_state_id + == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE + ) { + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + scic_sds_remote_node_context_notify_user(rnc); + } +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_posting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *this_rnc; + + this_rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + this_rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE + ); + + scic_sds_remote_node_context_validate_context_buffer(this_rnc); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_invalidating_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE + ); + + scic_sds_remote_node_context_invalidate_context_buffer(rnc); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_resuming_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE + ); + + scic_sds_remote_device_post_request( + rnc->device, + SCU_CONTEXT_COMMAND_POST_RNC_RESUME + ); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_ready_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE + ); + + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + if (rnc->user_callback != NULL) { + scic_sds_remote_node_context_notify_user(rnc); + } +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_tx_suspended_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE + ); + + scic_sds_remote_node_context_continue_state_transitions(rnc); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE + ); + + scic_sds_remote_node_context_continue_state_transitions(rnc); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_await_suspension_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_remote_node_context_state_table[] = { + [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { + .enter_state = scic_sds_remote_node_context_initial_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { + .enter_state = scic_sds_remote_node_context_posting_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { + .enter_state = scic_sds_remote_node_context_invalidating_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { + .enter_state = scic_sds_remote_node_context_resuming_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { + .enter_state = scic_sds_remote_node_context_ready_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { + .enter_state = scic_sds_remote_node_context_tx_suspended_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { + .enter_state = scic_sds_remote_node_context_tx_rx_suspended_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { + .enter_state = scic_sds_remote_node_context_await_suspension_state_enter, + }, +}; + diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h new file mode 100644 index 0000000..59eacf8 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.h @@ -0,0 +1,342 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ +#define _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ + +/** + * This file contains the structures, constants, and prototypes associated with + * the remote node context in the silicon. It exists to model and manage + * the remote node context in the silicon. + * + * + */ + +#include "sci_types.h" +#include "sci_base_state.h" +#include "sci_base_state_machine.h" + +/* --------------------------------------------------------------------------- */ + +/** + * + * + * This constant represents an invalid remote device id, it is used to program + * the STPDARNI register so the driver knows when it has received a SIGNATURE + * FIS from the SCU. + */ +#define SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX 0x0FFF + +#define SCU_HARDWARE_SUSPENSION (0) +#define SCI_SOFTWARE_SUSPENSION (1) + +struct scic_sds_request; +struct scic_sds_remote_device; +struct scic_sds_remote_node_context; + +typedef void (*SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK)(void *); + +typedef enum sci_status (*SCIC_SDS_REMOTE_NODE_CONTEXT_OPERATION)( + struct scic_sds_remote_node_context *this_rnc, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter + ); + +typedef enum sci_status (*SCIC_SDS_REMOTE_NODE_CONTEXT_SUSPEND_OPERATION)( + struct scic_sds_remote_node_context *this_rnc, + u32 suspension_type, + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + void *callback_parameter + ); + +typedef enum sci_status (*SCIC_SDS_REMOTE_NODE_CONTEXT_IO_REQUEST)( + struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_request *the_request + ); + +typedef enum sci_status (*SCIC_SDS_REMOTE_NODE_CONTEXT_EVENT_HANDLER)( + struct scic_sds_remote_node_context *this_rnc, + u32 event_code + ); + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_remote_node_context_handlers { + /** + * This handle is invoked to stop the RNC. The callback is invoked when after + * the hardware notification that the RNC has been invalidated. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_OPERATION destruct_handler; + + /** + * This handler is invoked when there is a request to suspend the RNC. The + * callback is invoked after the hardware notification that the remote node is + * suspended. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_SUSPEND_OPERATION suspend_handler; + + /** + * This handler is invoked when there is a request to resume the RNC. The + * callback is invoked when after the RNC has reached the ready state. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_OPERATION resume_handler; + + /** + * This handler is invoked when there is a request to start an io request + * operation. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_IO_REQUEST start_io_handler; + + /** + * This handler is invoked when there is a request to start a task request + * operation. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_IO_REQUEST start_task_handler; + + /** + * This handler is invoked where there is an RNC event that must be processed. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_EVENT_HANDLER event_handler; + +}; + +/* --------------------------------------------------------------------------- */ + +/** + * + * + * This is the enumeration of the remote node context states. + */ +enum scis_sds_remote_node_context_states { + /** + * This state is the initial state for a remote node context. On a resume + * request the remote node context will transition to the posting state. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE, + + /** + * This is a transition state that posts the RNi to the hardware. Once the RNC + * is posted the remote node context will be made ready. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE, + + /** + * This is a transition state that will post an RNC invalidate to the + * hardware. Once the invalidate is complete the remote node context will + * transition to the posting state. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE, + + /** + * This is a transition state that will post an RNC resume to the hardare. + * Once the event notification of resume complete is received the remote node + * context will transition to the ready state. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE, + + /** + * This is the state that the remote node context must be in to accept io + * request operations. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE, + + /** + * This is the state that the remote node context transitions to when it gets + * a TX suspend notification from the hardware. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE, + + /** + * This is the state that the remote node context transitions to when it gets + * a TX RX suspend notification from the hardware. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE, + + /** + * This state is a wait state for the remote node context that waits for a + * suspend notification from the hardware. This state is entered when either + * there is a request to supend the remote node context or when there is a TC + * completion where the remote node will be suspended by the hardware. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE, + + SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES + +}; + +/** + * + * + * This enumeration is used to define the end destination state for the remote + * node context. + */ +enum SCIC_SDS_REMOTE_NODE_CONTEXT_DESTINATION_STATE { + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED, + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY, + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL +}; + +/** + * struct scic_sds_remote_node_context - This structure contains the data + * associated with the remote node context object. The remote node context + * (RNC) object models the the remote device information necessary to manage + * the silicon RNC. + * + * + */ +struct scic_sds_remote_node_context { + /* + * parent object + */ + struct sci_base_object parent; + + /** + * This pointer simply points to the remote device object containing + * this RNC. + * + * @todo Consider making the device pointer the associated object of the + * the parent object. + */ + struct scic_sds_remote_device *device; + + /** + * This field indicates the remote node index (RNI) associated with + * this RNC. + */ + u16 remote_node_index; + + /** + * This field is the recored suspension code or the reason for the remote node + * context suspension. + */ + u32 suspension_code; + + /** + * This field is true if the remote node context is resuming from its current + * state. This can cause an automatic resume on receiving a suspension + * notification. + */ + enum SCIC_SDS_REMOTE_NODE_CONTEXT_DESTINATION_STATE destination_state; + + /** + * This field contains the callback function that the user requested to be + * called when the requested state transition is complete. + */ + SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK user_callback; + + /** + * This field contains the parameter that is called when the user requested + * state transition is completed. + */ + void *user_cookie; + + /** + * This field contains the data for the object's state machine. + */ + struct sci_base_state_machine state_machine; + + struct scic_sds_remote_node_context_handlers *state_handlers; +}; + +/* --------------------------------------------------------------------------- */ + +extern const struct sci_base_state scic_sds_remote_node_context_state_table[]; + +extern struct scic_sds_remote_node_context_handlers + scic_sds_remote_node_context_state_handler_table[ + SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES]; + +/* --------------------------------------------------------------------------- */ + +void scic_sds_remote_node_context_construct( + struct scic_sds_remote_device *device, + struct scic_sds_remote_node_context *rnc, + u16 remote_node_index); + +void scic_sds_remote_node_context_construct_buffer( + struct scic_sds_remote_node_context *rnc); + + +bool scic_sds_remote_node_context_is_ready( + struct scic_sds_remote_node_context *this_rnc); + +#define scic_sds_remote_node_context_set_remote_node_index(rnc, rni) \ + ((rnc)->remote_node_index = (rni)) + +#define scic_sds_remote_node_context_get_remote_node_index(rcn) \ + ((rnc)->remote_node_index) + +#define scic_sds_remote_node_context_event_handler(rnc, event_code) \ + ((rnc)->state_handlers->event_handler(rnc, event_code)) + +#define scic_sds_remote_node_context_resume(rnc, callback, parameter) \ + ((rnc)->state_handlers->resume_handler(rnc, callback, parameter)) + +#define scic_sds_remote_node_context_suspend(rnc, suspend_type, callback, parameter) \ + ((rnc)->state_handlers->suspend_handler(rnc, suspend_type, callback, parameter)) + +#define scic_sds_remote_node_context_destruct(rnc, callback, parameter) \ + ((rnc)->state_handlers->destruct_handler(rnc, callback, parameter)) + +#define scic_sds_remote_node_context_start_io(rnc, request) \ + ((rnc)->state_handlers->start_io_handler(rnc, request)) + +#define scic_sds_remote_node_context_start_task(rnc, task) \ + ((rnc)->state_handlers->start_task_handler(rnc, task)) + +/* --------------------------------------------------------------------------- */ + +#endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ + diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.c b/drivers/scsi/isci/core/scic_sds_remote_node_table.c new file mode 100644 index 0000000..77919a2 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_remote_node_table.c @@ -0,0 +1,600 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the implementation of the SCIC_SDS_REMOTE_NODE_TABLE + * public, protected, and private methods. + * + * + */ +#include "sci_util.h" +#include "sci_environment.h" +#include "scic_sds_remote_node_table.h" +#include "scic_sds_remote_node_context.h" + +/** + * + * @remote_node_table: This is the remote node index table from which the + * selection will be made. + * @group_table_index: This is the index to the group table from which to + * search for an available selection. + * + * This routine will find the bit position in absolute bit terms of the next 32 + * + bit position. If there are available bits in the first u32 then it is + * just bit position. u32 This is the absolute bit position for an available + * group. + */ +static u32 scic_sds_remote_node_table_get_group_index( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u32 dword_index; + u32 *group_table; + u32 bit_index; + + group_table = remote_node_table->remote_node_groups[group_table_index]; + + for (dword_index = 0; dword_index < remote_node_table->group_array_size; dword_index++) { + if (group_table[dword_index] != 0) { + for (bit_index = 0; bit_index < 32; bit_index++) { + if ((group_table[dword_index] & (1 << bit_index)) != 0) { + return (dword_index * 32) + bit_index; + } + } + } + } + + return SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX; +} + +/** + * + * @out]: remote_node_table This the remote node table in which to clear the + * selector. + * @set_index: This is the remote node selector in which the change will be + * made. + * @group_index: This is the bit index in the table to be modified. + * + * This method will clear the group index entry in the specified group index + * table. none + */ +static void scic_sds_remote_node_table_clear_group_index( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index, + u32 group_index) +{ + u32 dword_index; + u32 bit_index; + u32 *group_table; + + BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); + BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); + + dword_index = group_index / 32; + bit_index = group_index % 32; + group_table = remote_node_table->remote_node_groups[group_table_index]; + + group_table[dword_index] = group_table[dword_index] & ~(1 << bit_index); +} + +/** + * + * @out]: remote_node_table This the remote node table in which to set the + * selector. + * @group_table_index: This is the remote node selector in which the change + * will be made. + * @group_index: This is the bit position in the table to be modified. + * + * This method will set the group index bit entry in the specified gropu index + * table. none + */ +static void scic_sds_remote_node_table_set_group_index( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index, + u32 group_index) +{ + u32 dword_index; + u32 bit_index; + u32 *group_table; + + BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); + BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); + + dword_index = group_index / 32; + bit_index = group_index % 32; + group_table = remote_node_table->remote_node_groups[group_table_index]; + + group_table[dword_index] = group_table[dword_index] | (1 << bit_index); +} + +/** + * + * @out]: remote_node_table This is the remote node table in which to modify + * the remote node availability. + * @remote_node_index: This is the remote node index that is being returned to + * the table. + * + * This method will set the remote to available in the remote node allocation + * table. none + */ +static void scic_sds_remote_node_table_set_node_index( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 slot_normalized; + u32 slot_position; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; + dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; + slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); + slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; + + remote_node_table->available_remote_nodes[dword_location] |= + 1 << (slot_normalized + slot_position); +} + +/** + * + * @out]: remote_node_table This is the remote node table from which to clear + * the available remote node bit. + * @remote_node_index: This is the remote node index which is to be cleared + * from the table. + * + * This method clears the remote node index from the table of available remote + * nodes. none + */ +static void scic_sds_remote_node_table_clear_node_index( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 slot_position; + u32 slot_normalized; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; + dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; + slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); + slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; + + remote_node_table->available_remote_nodes[dword_location] &= + ~(1 << (slot_normalized + slot_position)); +} + +/** + * + * @out]: remote_node_table The remote node table from which the slot will be + * cleared. + * @group_index: The index for the slot that is to be cleared. + * + * This method clears the entire table slot at the specified slot index. none + */ +static void scic_sds_remote_node_table_clear_group( + struct scic_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (group_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value &= ~(SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + remote_node_table->available_remote_nodes[dword_location] = dword_value; +} + +/** + * + * @remote_node_table: + * + * THis method sets an entire remote node group in the remote node table. + */ +static void scic_sds_remote_node_table_set_group( + struct scic_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (group_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value |= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + remote_node_table->available_remote_nodes[dword_location] = dword_value; +} + +/** + * + * @remote_node_table: This is the remote node table that for which the group + * value is to be returned. + * @group_index: This is the group index to use to find the group value. + * + * This method will return the group value for the specified group index. The + * bit values at the specified remote node group index. + */ +static u8 scic_sds_remote_node_table_get_group_value( + struct scic_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value &= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + dword_value = dword_value >> (dword_remainder * 4); + + return (u8)dword_value; +} + +/** + * + * @out]: remote_node_table The remote that which is to be initialized. + * @remote_node_entries: The number of entries to put in the table. + * + * This method will initialize the remote node table for use. none + */ +void scic_sds_remote_node_table_initialize( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_entries) +{ + u32 index; + + /* + * Initialize the raw data we could improve the speed by only initializing + * those entries that we are actually going to be used */ + memset( + remote_node_table->available_remote_nodes, + 0x00, + sizeof(remote_node_table->available_remote_nodes) + ); + + memset( + remote_node_table->remote_node_groups, + 0x00, + sizeof(remote_node_table->remote_node_groups) + ); + + /* Initialize the available remote node sets */ + remote_node_table->available_nodes_array_size = (u16) + (remote_node_entries / SCIC_SDS_REMOTE_NODES_PER_DWORD) + + ((remote_node_entries % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0); + + + /* Initialize each full DWORD to a FULL SET of remote nodes */ + for (index = 0; index < remote_node_entries; index++) { + scic_sds_remote_node_table_set_node_index(remote_node_table, index); + } + + remote_node_table->group_array_size = (u16) + (remote_node_entries / (SCU_STP_REMOTE_NODE_COUNT * 32)) + + ((remote_node_entries % (SCU_STP_REMOTE_NODE_COUNT * 32)) != 0); + + for (index = 0; index < (remote_node_entries / SCU_STP_REMOTE_NODE_COUNT); index++) { + /* + * These are all guaranteed to be full slot values so fill them in the + * available sets of 3 remote nodes */ + scic_sds_remote_node_table_set_group_index(remote_node_table, 2, index); + } + + /* Now fill in any remainders that we may find */ + if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 2) { + scic_sds_remote_node_table_set_group_index(remote_node_table, 1, index); + } else if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 1) { + scic_sds_remote_node_table_set_group_index(remote_node_table, 0, index); + } +} + +/** + * + * @out]: remote_node_table The remote node table from which to allocate a + * remote node. + * @table_index: The group index that is to be used for the search. + * + * This method will allocate a single RNi from the remote node table. The + * table index will determine from which remote node group table to search. + * This search may fail and another group node table can be specified. The + * function is designed to allow a serach of the available single remote node + * group up to the triple remote node group. If an entry is found in the + * specified table the remote node is removed and the remote node groups are + * updated. The RNi value or an invalid remote node context if an RNi can not + * be found. + */ +static u16 scic_sds_remote_node_table_allocate_single_remote_node( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u8 index; + u8 group_value; + u32 group_index; + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + group_index = scic_sds_remote_node_table_get_group_index( + remote_node_table, group_table_index); + + /* We could not find an available slot in the table selector 0 */ + if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { + group_value = scic_sds_remote_node_table_get_group_value( + remote_node_table, group_index); + + for (index = 0; index < SCU_STP_REMOTE_NODE_COUNT; index++) { + if (((1 << index) & group_value) != 0) { + /* We have selected a bit now clear it */ + remote_node_index = (u16)(group_index * SCU_STP_REMOTE_NODE_COUNT + + index); + + scic_sds_remote_node_table_clear_group_index( + remote_node_table, group_table_index, group_index + ); + + scic_sds_remote_node_table_clear_node_index( + remote_node_table, remote_node_index + ); + + if (group_table_index > 0) { + scic_sds_remote_node_table_set_group_index( + remote_node_table, group_table_index - 1, group_index + ); + } + + break; + } + } + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: This is the remote node table from which to allocate the + * remote node entries. + * @group_table_index: THis is the group table index which must equal two (2) + * for this operation. + * + * This method will allocate three consecutive remote node context entries. If + * there are no remaining triple entries the function will return a failure. + * The remote node index that represents three consecutive remote node entries + * or an invalid remote node context if none can be found. + */ +static u16 scic_sds_remote_node_table_allocate_triple_remote_node( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u32 group_index; + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + group_index = scic_sds_remote_node_table_get_group_index( + remote_node_table, group_table_index); + + if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { + remote_node_index = (u16)group_index * SCU_STP_REMOTE_NODE_COUNT; + + scic_sds_remote_node_table_clear_group_index( + remote_node_table, group_table_index, group_index + ); + + scic_sds_remote_node_table_clear_group( + remote_node_table, group_index + ); + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: This is the remote node table from which the remote node + * allocation is to take place. + * @remote_node_count: This is ther remote node count which is one of + * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). + * + * This method will allocate a remote node that mataches the remote node count + * specified by the caller. Valid values for remote node count is + * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). u16 This is + * the remote node index that is returned or an invalid remote node context. + */ +u16 scic_sds_remote_node_table_allocate_remote_node( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_count) +{ + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { + remote_node_index = + scic_sds_remote_node_table_allocate_single_remote_node( + remote_node_table, 0); + + if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + remote_node_index = + scic_sds_remote_node_table_allocate_single_remote_node( + remote_node_table, 1); + } + + if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + remote_node_index = + scic_sds_remote_node_table_allocate_single_remote_node( + remote_node_table, 2); + } + } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { + remote_node_index = + scic_sds_remote_node_table_allocate_triple_remote_node( + remote_node_table, 2); + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: + * + * This method will free a single remote node index back to the remote node + * table. This routine will update the remote node groups + */ +static void scic_sds_remote_node_table_release_single_remote_node( + struct scic_remote_node_table *remote_node_table, + u16 remote_node_index) +{ + u32 group_index; + u8 group_value; + + group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; + + group_value = scic_sds_remote_node_table_get_group_value(remote_node_table, group_index); + + /* + * Assert that we are not trying to add an entry to a slot that is already + * full. */ + BUG_ON(group_value == SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE); + + if (group_value == 0x00) { + /* + * There are no entries in this slot so it must be added to the single + * slot table. */ + scic_sds_remote_node_table_set_group_index(remote_node_table, 0, group_index); + } else if ((group_value & (group_value - 1)) == 0) { + /* + * There is only one entry in this slot so it must be moved from the + * single slot table to the dual slot table */ + scic_sds_remote_node_table_clear_group_index(remote_node_table, 0, group_index); + scic_sds_remote_node_table_set_group_index(remote_node_table, 1, group_index); + } else { + /* + * There are two entries in the slot so it must be moved from the dual + * slot table to the tripple slot table. */ + scic_sds_remote_node_table_clear_group_index(remote_node_table, 1, group_index); + scic_sds_remote_node_table_set_group_index(remote_node_table, 2, group_index); + } + + scic_sds_remote_node_table_set_node_index(remote_node_table, remote_node_index); +} + +/** + * + * @remote_node_table: This is the remote node table to which the remote node + * index is to be freed. + * + * This method will release a group of three consecutive remote nodes back to + * the free remote nodes. + */ +static void scic_sds_remote_node_table_release_triple_remote_node( + struct scic_remote_node_table *remote_node_table, + u16 remote_node_index) +{ + u32 group_index; + + group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; + + scic_sds_remote_node_table_set_group_index( + remote_node_table, 2, group_index + ); + + scic_sds_remote_node_table_set_group(remote_node_table, group_index); +} + +/** + * + * @remote_node_table: The remote node table to which the remote node index is + * to be freed. + * @remote_node_count: This is the count of consecutive remote nodes that are + * to be freed. + * + * This method will release the remote node index back into the remote node + * table free pool. + */ +void scic_sds_remote_node_table_release_remote_node_index( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_count, + u16 remote_node_index) +{ + if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { + scic_sds_remote_node_table_release_single_remote_node( + remote_node_table, remote_node_index); + } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { + scic_sds_remote_node_table_release_triple_remote_node( + remote_node_table, remote_node_index); + } +} + diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.h b/drivers/scsi/isci/core/scic_sds_remote_node_table.h new file mode 100644 index 0000000..6ee5fba --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_remote_node_table.h @@ -0,0 +1,196 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_NODE_TABLE_H_ +#define _SCIC_SDS_REMOTE_NODE_TABLE_H_ + +/** + * This file contains the structures, constants and prototypes used for the + * remote node table. + * + * + */ + +#include "sci_types.h" +#include "sci_controller_constants.h" + +/** + * + * + * Remote node sets are sets of remote node index in the remtoe node table The + * SCU hardware requires that STP remote node entries take three consecutive + * remote node index so the table is arranged in sets of three. The bits are + * used as 0111 0111 to make a byte and the bits define the set of three remote + * nodes to use as a sequence. + */ +#define SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE 2 + +/** + * + * + * Since the remote node table is organized as DWORDS take the remote node sets + * in bytes and represent them in DWORDs. The lowest ordered bits are the ones + * used in case full DWORD is not being used. i.e. 0000 0000 0000 0000 0111 + * 0111 0111 0111 // if only a single WORD is in use in the DWORD. + */ +#define SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD \ + (sizeof(u32) * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) +/** + * + * + * This is a count of the numeber of remote nodes that can be represented in a + * byte + */ +#define SCIC_SDS_REMOTE_NODES_PER_BYTE \ + (SCU_STP_REMOTE_NODE_COUNT * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) + +/** + * + * + * This is a count of the number of remote nodes that can be represented in a + * DWROD + */ +#define SCIC_SDS_REMOTE_NODES_PER_DWORD \ + (sizeof(u32) * SCIC_SDS_REMOTE_NODES_PER_BYTE) + +/** + * + * + * This is the number of bits in a remote node group + */ +#define SCIC_SDS_REMOTE_NODES_BITS_PER_GROUP 4 + +#define SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX (0xFFFFFFFF) +#define SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE (0x07) +#define SCIC_SDS_REMOTE_NODE_TABLE_EMPTY_SLOT_VALUE (0x00) + +/** + * + * + * Expander attached sata remote node count + */ +#define SCU_STP_REMOTE_NODE_COUNT 3 + +/** + * + * + * Expander or direct attached ssp remote node count + */ +#define SCU_SSP_REMOTE_NODE_COUNT 1 + +/** + * + * + * Direct attached STP remote node count + */ +#define SCU_SATA_REMOTE_NODE_COUNT 1 + +/** + * struct scic_remote_node_table - + * + * + */ +struct scic_remote_node_table { + /** + * This field contains the array size in dwords + */ + u16 available_nodes_array_size; + + /** + * This field contains the array size of the + */ + u16 group_array_size; + + /** + * This field is the array of available remote node entries in bits. + * Because of the way STP remote node data is allocated on the SCU hardware + * the remote nodes must occupy three consecutive remote node context + * entries. For ease of allocation and de-allocation we have broken the + * sets of three into a single nibble. When the STP RNi is allocated all + * of the bits in the nibble are cleared. This math results in a table size + * of MAX_REMOTE_NODES / CONSECUTIVE RNi ENTRIES for STP / 2 entries per byte. + */ + u32 available_remote_nodes[ + (SCI_MAX_REMOTE_DEVICES / SCIC_SDS_REMOTE_NODES_PER_DWORD) + + ((SCI_MAX_REMOTE_DEVICES % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0)]; + + /** + * This field is the nibble selector for the above table. There are three + * possible selectors each for fast lookup when trying to find one, two or + * three remote node entries. + */ + u32 remote_node_groups[ + SCU_STP_REMOTE_NODE_COUNT][ + (SCI_MAX_REMOTE_DEVICES / (32 * SCU_STP_REMOTE_NODE_COUNT)) + + ((SCI_MAX_REMOTE_DEVICES % (32 * SCU_STP_REMOTE_NODE_COUNT)) != 0)]; + +}; + +/* --------------------------------------------------------------------------- */ + +void scic_sds_remote_node_table_initialize( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_entries); + +u16 scic_sds_remote_node_table_allocate_remote_node( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_count); + +void scic_sds_remote_node_table_release_remote_node_index( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_count, + u16 remote_node_index); + +#endif /* _SCIC_SDS_REMOTE_NODE_TABLE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c new file mode 100644 index 0000000..c696d24 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -0,0 +1,2179 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +#include "intel_sas.h" +#include "intel_sata.h" +#include "intel_sat.h" +#include "sci_base_request.h" +#include "scic_controller.h" +#include "scic_io_request.h" +#include "scic_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_controller_registers.h" +#include "scic_sds_pci.h" +#include "scic_sds_port.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_request.h" +#include "scic_sds_smp_request.h" +#include "scic_sds_stp_request.h" +#include "scic_sds_unsolicited_frame_control.h" +#include "scic_user_callback.h" +#include "sci_environment.h" +#include "sci_types.h" +#include "sci_util.h" +#include "scu_completion_codes.h" +#include "scu_constants.h" +#include "scu_task_context.h" + +#if !defined(DISABLE_ATAPI) +#include "scic_sds_stp_packet_request.h" +#endif + +/* + * **************************************************************************** + * * SCIC SDS IO REQUEST CONSTANTS + * **************************************************************************** */ + +/** + * + * + * We have no timer requirements for IO requests right now + */ +#define SCIC_SDS_IO_REQUEST_MINIMUM_TIMER_COUNT (0) +#define SCIC_SDS_IO_REQUEST_MAXIMUM_TIMER_COUNT (0) + +/* + * **************************************************************************** + * * SCIC SDS IO REQUEST MACROS + * **************************************************************************** */ + +/** + * scic_sds_request_get_user_request() - + * + * This is a helper macro to return the os handle for this request object. + */ +#define scic_sds_request_get_user_request(request) \ + ((request)->user_request) + + +/** + * scic_ssp_io_request_get_object_size() - + * + * This macro returns the sizeof memory required to store the an SSP IO + * request. This does not include the size of the SGL or SCU Task Context + * memory. + */ +#define scic_ssp_io_request_get_object_size() \ + (\ + sizeof(struct sci_ssp_command_iu) \ + + sizeof(struct sci_ssp_response_iu) \ + ) + +/** + * scic_sds_ssp_request_get_command_buffer() - + * + * This macro returns the address of the ssp command buffer in the io request + * memory + */ +#define scic_sds_ssp_request_get_command_buffer(memory) \ + ((struct sci_ssp_command_iu *)(\ + ((char *)(memory)) + sizeof(struct scic_sds_request) \ + )) + +/** + * scic_sds_ssp_request_get_response_buffer() - + * + * This macro returns the address of the ssp response buffer in the io request + * memory + */ +#define scic_sds_ssp_request_get_response_buffer(memory) \ + ((struct sci_ssp_response_iu *)(\ + ((char *)(scic_sds_ssp_request_get_command_buffer(memory))) \ + + sizeof(struct sci_ssp_command_iu) \ + )) + +/** + * scic_sds_ssp_request_get_task_context_buffer() - + * + * This macro returns the address of the task context buffer in the io request + * memory + */ +#define scic_sds_ssp_request_get_task_context_buffer(memory) \ + ((struct scu_task_context *)(\ + ((char *)(scic_sds_ssp_request_get_response_buffer(memory))) \ + + sizeof(struct sci_ssp_response_iu) \ + )) + +/** + * scic_sds_ssp_request_get_sgl_element_buffer() - + * + * This macro returns the address of the sgl elment pairs in the io request + * memory buffer + */ +#define scic_sds_ssp_request_get_sgl_element_buffer(memory) \ + ((struct scu_sgl_element_pair *)(\ + ((char *)(scic_sds_ssp_request_get_task_context_buffer(memory))) \ + + sizeof(struct scu_task_context) \ + )) + + +/** + * scic_ssp_task_request_get_object_size() - + * + * This macro returns the sizeof of memory required to store an SSP Task + * request. This does not include the size of the SCU Task Context memory. + */ +#define scic_ssp_task_request_get_object_size() \ + (\ + sizeof(struct sci_ssp_task_iu) \ + + sizeof(struct sci_ssp_response_iu) \ + ) + +/** + * scic_sds_ssp_task_request_get_command_buffer() - + * + * This macro returns the address of the ssp command buffer in the task request + * memory. Yes its the same as the above macro except for the name. + */ +#define scic_sds_ssp_task_request_get_command_buffer(memory) \ + ((struct sci_ssp_task_iu *)(\ + ((char *)(memory)) + sizeof(struct scic_sds_request) \ + )) + +/** + * scic_sds_ssp_task_request_get_response_buffer() - + * + * This macro returns the address of the ssp response buffer in the task + * request memory. + */ +#define scic_sds_ssp_task_request_get_response_buffer(memory) \ + ((struct sci_ssp_response_iu *)(\ + ((char *)(scic_sds_ssp_task_request_get_command_buffer(memory))) \ + + sizeof(struct sci_ssp_task_iu) \ + )) + +/** + * scic_sds_ssp_task_request_get_task_context_buffer() - + * + * This macro returs the task context buffer for the SSP task request. + */ +#define scic_sds_ssp_task_request_get_task_context_buffer(memory) \ + ((struct scu_task_context *)(\ + ((char *)(scic_sds_ssp_task_request_get_response_buffer(memory))) \ + + sizeof(struct sci_ssp_response_iu) \ + )) + + + +/* + * **************************************************************************** + * * SCIC SDS IO REQUEST PRIVATE METHODS + * **************************************************************************** */ + +/** + * + * + * This method returns the size required to store an SSP IO request object. u32 + */ +static u32 scic_sds_ssp_request_get_object_size(void) +{ + return sizeof(struct scic_sds_request) + + scic_ssp_io_request_get_object_size() + + sizeof(struct scu_task_context) + + CACHE_LINE_SIZE + + sizeof(struct scu_sgl_element_pair) * SCU_MAX_SGL_ELEMENT_PAIRS; +} + +/** + * This method returns the sgl element pair for the specificed sgl_pair index. + * @this_request: This parameter specifies the IO request for which to retrieve + * the Scatter-Gather List element pair. + * @sgl_pair_index: This parameter specifies the index into the SGL element + * pair to be retrieved. + * + * This method returns a pointer to an struct scu_sgl_element_pair. + */ +static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( + struct scic_sds_request *this_request, + u32 sgl_pair_index + ) { + struct scu_task_context *task_context; + + task_context = (struct scu_task_context *)this_request->task_context_buffer; + + if (sgl_pair_index == 0) { + return &task_context->sgl_pair_ab; + } else if (sgl_pair_index == 1) { + return &task_context->sgl_pair_cd; + } + + return &this_request->sgl_element_pair_buffer[sgl_pair_index - 2]; +} + +/** + * This function will build the SGL list for an IO request. + * @this_request: This parameter specifies the IO request for which to build + * the Scatter-Gather List. + * + */ +void scic_sds_request_build_sgl( + struct scic_sds_request *this_request) +{ + void *os_sge; + void *os_handle; + dma_addr_t physical_address; + u32 sgl_pair_index = 0; + struct scu_sgl_element_pair *scu_sgl_list = NULL; + struct scu_sgl_element_pair *previous_pair = NULL; + + os_handle = scic_sds_request_get_user_request(this_request); + scic_cb_io_request_get_next_sge(os_handle, NULL, &os_sge); + + while (os_sge != NULL) { + scu_sgl_list = + scic_sds_request_get_sgl_element_pair(this_request, sgl_pair_index); + + SCU_SGL_COPY(os_handle, scu_sgl_list->A, os_sge); + + scic_cb_io_request_get_next_sge(os_handle, os_sge, &os_sge); + + if (os_sge != NULL) { + SCU_SGL_COPY(os_handle, scu_sgl_list->B, os_sge); + + scic_cb_io_request_get_next_sge(os_handle, os_sge, &os_sge); + } else { + SCU_SGL_ZERO(scu_sgl_list->B); + } + + if (previous_pair != NULL) { + scic_cb_io_request_get_physical_address( + scic_sds_request_get_controller(this_request), + this_request, + scu_sgl_list, + &physical_address + ); + + previous_pair->next_pair_upper = + upper_32_bits(physical_address); + previous_pair->next_pair_lower = + lower_32_bits(physical_address); + } + + previous_pair = scu_sgl_list; + sgl_pair_index++; + } + + if (scu_sgl_list != NULL) { + scu_sgl_list->next_pair_upper = 0; + scu_sgl_list->next_pair_lower = 0; + } +} + +/** + * This method initializes common portions of the io request object. This + * includes construction of the struct sci_base_request parent. + * @the_controller: This parameter specifies the controller for which the + * request is being constructed. + * @the_target: This parameter specifies the remote device for which the + * request is being constructed. + * @io_tag: This parameter specifies the IO tag to be utilized for this + * request. This parameter can be set to SCI_CONTROLLER_INVALID_IO_TAG. + * @user_io_request_object: This parameter specifies the user request object + * for which the request is being constructed. + * @this_request: This parameter specifies the request being constructed. + * + */ +static void scic_sds_general_request_construct( + struct scic_sds_controller *the_controller, + struct scic_sds_remote_device *the_target, + u16 io_tag, + void *user_io_request_object, + struct scic_sds_request *this_request) +{ + sci_base_request_construct( + &this_request->parent, + scic_sds_request_state_table + ); + + this_request->io_tag = io_tag; + this_request->user_request = user_io_request_object; + this_request->owning_controller = the_controller; + this_request->target_device = the_target; + this_request->has_started_substate_machine = false; + this_request->protocol = SCIC_NO_PROTOCOL; + this_request->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; + this_request->device_sequence = scic_sds_remote_device_get_sequence(the_target); + + this_request->sci_status = SCI_SUCCESS; + this_request->scu_status = 0; + this_request->post_context = 0xFFFFFFFF; + + this_request->is_task_management_request = false; + + if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + this_request->was_tag_assigned_by_user = false; + this_request->task_context_buffer = NULL; + } else { + this_request->was_tag_assigned_by_user = true; + + this_request->task_context_buffer = + scic_sds_controller_get_task_context_buffer( + this_request->owning_controller, io_tag); + } +} + +/** + * This method build the remainder of the IO request object. + * @this_request: This parameter specifies the request object being constructed. + * + * The scic_sds_general_request_construct() must be called before this call is + * valid. none + */ +static void scic_sds_ssp_io_request_assign_buffers( + struct scic_sds_request *this_request) +{ + this_request->command_buffer = + scic_sds_ssp_request_get_command_buffer(this_request); + this_request->response_buffer = + scic_sds_ssp_request_get_response_buffer(this_request); + this_request->sgl_element_pair_buffer = + scic_sds_ssp_request_get_sgl_element_buffer(this_request); + this_request->sgl_element_pair_buffer = + scic_sds_request_align_sgl_element_buffer(this_request->sgl_element_pair_buffer); + + if (this_request->was_tag_assigned_by_user == false) { + this_request->task_context_buffer = + scic_sds_ssp_request_get_task_context_buffer(this_request); + this_request->task_context_buffer = + scic_sds_request_align_task_context_buffer(this_request->task_context_buffer); + } +} + +/** + * This method constructs the SSP Command IU data for this io request object. + * @this_request: This parameter specifies the request object for which the SSP + * command information unit is being built. + * + */ +static void scic_sds_io_request_build_ssp_command_iu( + struct scic_sds_request *this_request) +{ + struct sci_ssp_command_iu *command_frame; + void *os_handle; + u32 cdb_length; + u32 *cdb_buffer; + + command_frame = + (struct sci_ssp_command_iu *)this_request->command_buffer; + + os_handle = scic_sds_request_get_user_request(this_request); + + command_frame->lun_upper = 0; + command_frame->lun_lower = scic_cb_ssp_io_request_get_lun(os_handle); + + ((u32 *)command_frame)[2] = 0; + + cdb_length = scic_cb_ssp_io_request_get_cdb_length(os_handle); + cdb_buffer = (u32 *)scic_cb_ssp_io_request_get_cdb_address(os_handle); + + if (cdb_length > 16) { + command_frame->additional_cdb_length = cdb_length - 16; + } + + /* / @todo Is it ok to leave junk at the end of the cdb buffer? */ + scic_word_copy_with_swap( + (u32 *)(&command_frame->cdb), + (u32 *)(cdb_buffer), + (cdb_length + 3) / sizeof(u32) + ); + + command_frame->enable_first_burst = 0; + command_frame->task_priority = + scic_cb_ssp_io_request_get_command_priority(os_handle); + command_frame->task_attribute = + scic_cb_ssp_io_request_get_task_attribute(os_handle); +} + + +/** + * This method constructs the SSP Task IU data for this io request object. + * @this_request: + * + */ +static void scic_sds_task_request_build_ssp_task_iu( + struct scic_sds_request *this_request) +{ + struct sci_ssp_task_iu *command_frame; + void *os_handle; + + command_frame = + (struct sci_ssp_task_iu *)this_request->command_buffer; + + os_handle = scic_sds_request_get_user_request(this_request); + + command_frame->lun_upper = 0; + command_frame->lun_lower = scic_cb_ssp_task_request_get_lun(os_handle); + + ((u32 *)command_frame)[2] = 0; + + command_frame->task_function = + scic_cb_ssp_task_request_get_function(os_handle); + command_frame->task_tag = + scic_cb_ssp_task_request_get_io_tag_to_manage(os_handle); +} + + +/** + * This method is will fill in the SCU Task Context for any type of SSP request. + * @this_request: + * @task_context: + * + */ +static void scu_ssp_reqeust_construct_task_context( + struct scic_sds_request *this_request, + struct scu_task_context *task_context) +{ + dma_addr_t physical_address; + struct scic_sds_controller *owning_controller; + struct scic_sds_remote_device *target_device; + struct scic_sds_port *target_port; + + owning_controller = scic_sds_request_get_controller(this_request); + target_device = scic_sds_request_get_device(this_request); + target_port = scic_sds_request_get_port(this_request); + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = + scic_remote_device_get_connection_rate(target_device); + task_context->protocol_engine_index = + scic_sds_controller_get_protocol_engine_group(owning_controller); + task_context->logical_port_index = + scic_sds_port_get_index(target_port); + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = + scic_sds_remote_device_get_index(this_request->target_device); + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + + /* task_context->type.ssp.tag = this_request->io_tag; */ + task_context->task_phase = 0x01; + + if (this_request->was_tag_assigned_by_user) { + /* Build the task context now since we have already read the data */ + this_request->post_context = ( + SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC + | ( + scic_sds_controller_get_protocol_engine_group(owning_controller) + << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT + ) + | ( + scic_sds_port_get_index(target_port) + << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT + ) + | scic_sds_io_tag_get_index(this_request->io_tag) + ); + } else { + /* Build the task context now since we have already read the data */ + this_request->post_context = ( + SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC + | ( + scic_sds_controller_get_protocol_engine_group(owning_controller) + << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT + ) + | ( + scic_sds_port_get_index(target_port) + << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT + ) + /* This is not assigned because we have to wait until we get a TCi */ + ); + } + + /* Copy the physical address for the command buffer to the SCU Task Context */ + scic_cb_io_request_get_physical_address( + scic_sds_request_get_controller(this_request), + this_request, + this_request->command_buffer, + &physical_address + ); + + task_context->command_iu_upper = + upper_32_bits(physical_address); + task_context->command_iu_lower = + lower_32_bits(physical_address); + + /* Copy the physical address for the response buffer to the SCU Task Context */ + scic_cb_io_request_get_physical_address( + scic_sds_request_get_controller(this_request), + this_request, + this_request->response_buffer, + &physical_address + ); + + task_context->response_iu_upper = + upper_32_bits(physical_address); + task_context->response_iu_lower = + lower_32_bits(physical_address); +} + +/** + * This method is will fill in the SCU Task Context for a SSP IO request. + * @this_request: + * + */ +static void scu_ssp_io_request_construct_task_context( + struct scic_sds_request *this_request, + SCI_IO_REQUEST_DATA_DIRECTION data_direction, + u32 transfer_length_bytes) +{ + struct scu_task_context *task_context; + + task_context = scic_sds_request_get_task_context(this_request); + + scu_ssp_reqeust_construct_task_context(this_request, task_context); + + task_context->ssp_command_iu_length = sizeof(struct sci_ssp_command_iu) / sizeof(u32); + task_context->type.ssp.frame_type = SCI_SAS_COMMAND_FRAME; + + switch (data_direction) { + case SCI_IO_REQUEST_DATA_IN: + case SCI_IO_REQUEST_NO_DATA: + task_context->task_type = SCU_TASK_TYPE_IOREAD; + break; + case SCI_IO_REQUEST_DATA_OUT: + task_context->task_type = SCU_TASK_TYPE_IOWRITE; + break; + } + + task_context->transfer_length_bytes = transfer_length_bytes; + + if (task_context->transfer_length_bytes > 0) { + scic_sds_request_build_sgl(this_request); + } +} + + +/** + * This method will fill in the remainder of the io request object for SSP Task + * requests. + * @this_request: + * + */ +static void scic_sds_ssp_task_request_assign_buffers( + struct scic_sds_request *this_request) +{ + /* Assign all of the buffer pointers */ + this_request->command_buffer = + scic_sds_ssp_task_request_get_command_buffer(this_request); + this_request->response_buffer = + scic_sds_ssp_task_request_get_response_buffer(this_request); + this_request->sgl_element_pair_buffer = NULL; + + if (this_request->was_tag_assigned_by_user == false) { + this_request->task_context_buffer = + scic_sds_ssp_task_request_get_task_context_buffer(this_request); + this_request->task_context_buffer = + scic_sds_request_align_task_context_buffer(this_request->task_context_buffer); + } +} + +/** + * This method will fill in the SCU Task Context for a SSP Task request. The + * following important settings are utilized: -# priority == + * SCU_TASK_PRIORITY_HIGH. This ensures that the task request is issued + * ahead of other task destined for the same Remote Node. -# task_type == + * SCU_TASK_TYPE_IOREAD. This simply indicates that a normal request type + * (i.e. non-raw frame) is being utilized to perform task management. -# + * control_frame == 1. This ensures that the proper endianess is set so + * that the bytes are transmitted in the right order for a task frame. + * @this_request: This parameter specifies the task request object being + * constructed. + * + */ +static void scu_ssp_task_request_construct_task_context( + struct scic_sds_request *this_request) +{ + struct scu_task_context *task_context; + + task_context = scic_sds_request_get_task_context(this_request); + + scu_ssp_reqeust_construct_task_context(this_request, task_context); + + task_context->control_frame = 1; + task_context->priority = SCU_TASK_PRIORITY_HIGH; + task_context->task_type = SCU_TASK_TYPE_RAW_FRAME; + task_context->transfer_length_bytes = 0; + task_context->type.ssp.frame_type = SCI_SAS_TASK_FRAME; + task_context->ssp_command_iu_length = sizeof(struct sci_ssp_task_iu) / sizeof(u32); +} + + +/** + * This method constructs the SSP Command IU data for this ssp passthrough + * comand request object. + * @this_request: This parameter specifies the request object for which the SSP + * command information unit is being built. + * + * enum sci_status, returns invalid parameter is cdb > 16 + */ + + +/** + * This method constructs the SATA request object. + * @this_request: + * @sat_protocol: + * @transfer_length: + * @data_direction: + * @copy_rx_frame: + * + * enum sci_status + */ +static enum sci_status scic_io_request_construct_sata( + struct scic_sds_request *this_request, + u8 sat_protocol, + u32 transfer_length, + SCI_IO_REQUEST_DATA_DIRECTION data_direction, + bool copy_rx_frame) +{ + enum sci_status status = SCI_SUCCESS; + + switch (sat_protocol) { + case SAT_PROTOCOL_PIO_DATA_IN: + case SAT_PROTOCOL_PIO_DATA_OUT: + status = scic_sds_stp_pio_request_construct(this_request, sat_protocol, copy_rx_frame); + break; + + case SAT_PROTOCOL_UDMA_DATA_IN: + case SAT_PROTOCOL_UDMA_DATA_OUT: + status = scic_sds_stp_udma_request_construct(this_request, transfer_length, data_direction); + break; + + case SAT_PROTOCOL_ATA_HARD_RESET: + case SAT_PROTOCOL_SOFT_RESET: + status = scic_sds_stp_soft_reset_request_construct(this_request); + break; + + case SAT_PROTOCOL_NON_DATA: + status = scic_sds_stp_non_data_request_construct(this_request); + break; + + case SAT_PROTOCOL_FPDMA: + status = scic_sds_stp_ncq_request_construct(this_request, transfer_length, data_direction); + break; + +#if !defined(DISABLE_ATAPI) + case SAT_PROTOCOL_PACKET_NON_DATA: + case SAT_PROTOCOL_PACKET_DMA_DATA_IN: + case SAT_PROTOCOL_PACKET_DMA_DATA_OUT: + case SAT_PROTOCOL_PACKET_PIO_DATA_IN: + case SAT_PROTOCOL_PACKET_PIO_DATA_OUT: + status = scic_sds_stp_packet_request_construct(this_request); + break; +#endif + + case SAT_PROTOCOL_DMA_QUEUED: + case SAT_PROTOCOL_DMA: + case SAT_PROTOCOL_DEVICE_DIAGNOSTIC: + case SAT_PROTOCOL_DEVICE_RESET: + case SAT_PROTOCOL_RETURN_RESPONSE_INFO: + default: + dev_err(scic_to_dev(this_request->owning_controller), + "%s: SCIC IO Request 0x%p received un-handled " + "SAT Protocl %d.\n", + __func__, this_request, sat_protocol); + + status = SCI_FAILURE; + break; + } + + return status; +} + +/* + * **************************************************************************** + * * SCIC Interface Implementation + * **************************************************************************** */ + + + + +/* --------------------------------------------------------------------------- */ + +u32 scic_io_request_get_object_size(void) +{ + u32 ssp_request_size; + u32 stp_request_size; + u32 smp_request_size; + + ssp_request_size = scic_sds_ssp_request_get_object_size(); + stp_request_size = scic_sds_stp_request_get_object_size(); + smp_request_size = scic_sds_smp_request_get_object_size(); + + return max(ssp_request_size, max(stp_request_size, smp_request_size)); +} + +/* --------------------------------------------------------------------------- */ + + +/* --------------------------------------------------------------------------- */ + + +/* --------------------------------------------------------------------------- */ + + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_io_request_construct( + struct scic_sds_controller *scic_controller, + struct scic_sds_remote_device *scic_remote_device, + u16 io_tag, + void *user_io_request_object, + void *scic_io_request_memory, + struct scic_sds_request **new_scic_io_request_handle) +{ + enum sci_status status = SCI_SUCCESS; + struct scic_sds_request *this_request; + struct smp_discover_response_protocols device_protocol; + + this_request = (struct scic_sds_request *)scic_io_request_memory; + + /* Build the common part of the request */ + scic_sds_general_request_construct( + (struct scic_sds_controller *)scic_controller, + (struct scic_sds_remote_device *)scic_remote_device, + io_tag, + user_io_request_object, + this_request + ); + + if ( + scic_sds_remote_device_get_index((struct scic_sds_remote_device *)scic_remote_device) + == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX + ) { + return SCI_FAILURE_INVALID_REMOTE_DEVICE; + } + + scic_remote_device_get_protocols(scic_remote_device, &device_protocol); + + if (device_protocol.u.bits.attached_ssp_target) { + scic_sds_ssp_io_request_assign_buffers(this_request); + } else if (device_protocol.u.bits.attached_stp_target) { + scic_sds_stp_request_assign_buffers(this_request); + memset(this_request->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); + } else if (device_protocol.u.bits.attached_smp_target) { + scic_sds_smp_request_assign_buffers(this_request); + memset(this_request->command_buffer, 0, sizeof(struct smp_request)); + } else { + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + } + + if (status == SCI_SUCCESS) { + memset( + this_request->task_context_buffer, + 0, + SCI_FIELD_OFFSET(struct scu_task_context, sgl_pair_ab) + ); + *new_scic_io_request_handle = scic_io_request_memory; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + + +enum sci_status scic_task_request_construct( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + u16 io_tag, + void *user_io_request_object, + void *scic_task_request_memory, + struct scic_sds_request **new_scic_task_request_handle) +{ + enum sci_status status = SCI_SUCCESS; + struct scic_sds_request *this_request = (struct scic_sds_request *) + scic_task_request_memory; + struct smp_discover_response_protocols device_protocol; + + /* Build the common part of the request */ + scic_sds_general_request_construct( + (struct scic_sds_controller *)controller, + (struct scic_sds_remote_device *)remote_device, + io_tag, + user_io_request_object, + this_request + ); + + scic_remote_device_get_protocols(remote_device, &device_protocol); + + if (device_protocol.u.bits.attached_ssp_target) { + scic_sds_ssp_task_request_assign_buffers(this_request); + + this_request->has_started_substate_machine = true; + + /* Construct the started sub-state machine. */ + sci_base_state_machine_construct( + &this_request->started_substate_machine, + &this_request->parent.parent, + scic_sds_io_request_started_task_mgmt_substate_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION + ); + } else if (device_protocol.u.bits.attached_stp_target) { + scic_sds_stp_request_assign_buffers(this_request); + } else { + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + } + + if (status == SCI_SUCCESS) { + this_request->is_task_management_request = true; + memset(this_request->task_context_buffer, 0x00, sizeof(struct scu_task_context)); + *new_scic_task_request_handle = scic_task_request_memory; + } + + return status; +} + + +enum sci_status scic_io_request_construct_basic_ssp( + struct scic_sds_request *sci_req) +{ + void *os_handle; + + sci_req->protocol = SCIC_SSP_PROTOCOL; + + os_handle = scic_sds_request_get_user_request(sci_req); + + scu_ssp_io_request_construct_task_context( + sci_req, + scic_cb_io_request_get_data_direction(os_handle), + scic_cb_io_request_get_transfer_length(os_handle) + ); + + + scic_sds_io_request_build_ssp_command_iu(sci_req); + + sci_base_state_machine_change_state( + &sci_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED + ); + + return SCI_SUCCESS; +} + + +enum sci_status scic_task_request_construct_ssp( + struct scic_sds_request *sci_req) +{ + /* Construct the SSP Task SCU Task Context */ + scu_ssp_task_request_construct_task_context(sci_req); + + /* Fill in the SSP Task IU */ + scic_sds_task_request_build_ssp_task_iu(sci_req); + + sci_base_state_machine_change_state( + &sci_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED + ); + + return SCI_SUCCESS; +} + + +enum sci_status scic_io_request_construct_basic_sata( + struct scic_sds_request *sci_req) +{ + enum sci_status status; + struct scic_sds_stp_request *this_stp_request; + u8 sat_protocol; + u32 transfer_length; + SCI_IO_REQUEST_DATA_DIRECTION data_direction; + bool copy_rx_frame = false; + + this_stp_request = (struct scic_sds_stp_request *)sci_req; + + sci_req->protocol = SCIC_STP_PROTOCOL; + + transfer_length = + scic_cb_io_request_get_transfer_length(sci_req->user_request); + data_direction = + scic_cb_io_request_get_data_direction(sci_req->user_request); + + sat_protocol = scic_cb_request_get_sat_protocol(sci_req->user_request); + copy_rx_frame = scic_cb_io_request_do_copy_rx_frames(this_stp_request->parent.user_request); + + status = scic_io_request_construct_sata( + sci_req, + sat_protocol, + transfer_length, + data_direction, + copy_rx_frame + ); + + if (status == SCI_SUCCESS) + sci_base_state_machine_change_state( + &sci_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED + ); + + return status; +} + + +enum sci_status scic_task_request_construct_sata( + struct scic_sds_request *sci_req) +{ + enum sci_status status; + u8 sat_protocol = scic_cb_request_get_sat_protocol(sci_req->user_request); + + switch (sat_protocol) { + case SAT_PROTOCOL_ATA_HARD_RESET: + case SAT_PROTOCOL_SOFT_RESET: + status = scic_sds_stp_soft_reset_request_construct(sci_req); + break; + + default: + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: SCIC IO Request 0x%p received un-handled SAT " + "Protocl %d.\n", + __func__, + sci_req, + sat_protocol); + + status = SCI_FAILURE; + break; + } + + if (status == SCI_SUCCESS) + sci_base_state_machine_change_state( + &sci_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED + ); + + return status; +} + + +u16 scic_io_request_get_io_tag( + struct scic_sds_request *sci_req) +{ + return sci_req->io_tag; +} + + +u32 scic_request_get_controller_status( + struct scic_sds_request *sci_req) +{ + return sci_req->scu_status; +} + + +void *scic_io_request_get_command_iu_address( + struct scic_sds_request *sci_req) +{ + return sci_req->command_buffer; +} + + +void *scic_io_request_get_response_iu_address( + struct scic_sds_request *sci_req) +{ + return sci_req->response_buffer; +} + + +#define SCU_TASK_CONTEXT_SRAM 0x200000 +u32 scic_io_request_get_number_of_bytes_transferred( + struct scic_sds_request *scic_sds_request) +{ + u32 ret_val = 0; + + if (SMU_AMR_READ(scic_sds_request->owning_controller) == 0) { + /* + * get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where + * BAR1 is the scu_registers + * 0x20002C = 0x200000 + 0x2c + * = start of task context SRAM + offset of (type.ssp.data_offset) + * TCi is the io_tag of struct scic_sds_request */ + ret_val = scic_sds_pci_read_scu_dword( + scic_sds_request->owning_controller, + ( + (u8 *)scic_sds_request->owning_controller->scu_registers + + (SCU_TASK_CONTEXT_SRAM + SCI_FIELD_OFFSET(struct scu_task_context, type.ssp.data_offset)) + + ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(scic_sds_request->io_tag)) + ) + ); + } + + return ret_val; +} + + +/* + * **************************************************************************** + * * SCIC SDS Interface Implementation + * **************************************************************************** */ + +/** + * + * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start + * operation is to be executed. + * + * This method invokes the base state start request handler for the + * SCIC_SDS_IO_REQUEST_T object. enum sci_status + */ +enum sci_status scic_sds_request_start( + struct scic_sds_request *this_request) +{ + if ( + this_request->device_sequence + == scic_sds_remote_device_get_sequence(this_request->target_device) + ) { + return this_request->state_handlers->parent.start_handler( + &this_request->parent + ); + } + + return SCI_FAILURE; +} + +/** + * + * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start + * operation is to be executed. + * + * This method invokes the base state terminate request handber for the + * SCIC_SDS_IO_REQUEST_T object. enum sci_status + */ +enum sci_status scic_sds_io_request_terminate( + struct scic_sds_request *this_request) +{ + return this_request->state_handlers->parent.abort_handler( + &this_request->parent); +} + +/** + * + * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start + * operation is to be executed. + * + * This method invokes the base state request completion handler for the + * SCIC_SDS_IO_REQUEST_T object. enum sci_status + */ +enum sci_status scic_sds_io_request_complete( + struct scic_sds_request *this_request) +{ + return this_request->state_handlers->parent.complete_handler( + &this_request->parent); +} + +/** + * + * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start + * operation is to be executed. + * @event_code: The event code returned by the hardware for the task reqeust. + * + * This method invokes the core state handler for the SCIC_SDS_IO_REQUEST_T + * object. enum sci_status + */ +enum sci_status scic_sds_io_request_event_handler( + struct scic_sds_request *this_request, + u32 event_code) +{ + return this_request->state_handlers->event_handler(this_request, event_code); +} + +/** + * + * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start + * operation is to be executed. + * @frame_index: The frame index returned by the hardware for the reqeust + * object. + * + * This method invokes the core state frame handler for the + * SCIC_SDS_IO_REQUEST_T object. enum sci_status + */ +enum sci_status scic_sds_io_request_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index) +{ + return this_request->state_handlers->frame_handler(this_request, frame_index); +} + +/** + * + * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the task start + * operation is to be executed. + * + * This method invokes the core state task complete handler for the + * SCIC_SDS_IO_REQUEST_T object. enum sci_status + */ + +/* + * **************************************************************************** + * * SCIC SDS PROTECTED METHODS + * **************************************************************************** */ + +/** + * This method copies response data for requests returning response data + * instead of sense data. + * @this_request: This parameter specifies the request object for which to copy + * the response data. + * + */ +void scic_sds_io_request_copy_response( + struct scic_sds_request *this_request) +{ + void *response_buffer; + u32 user_response_length; + u32 core_response_length; + struct sci_ssp_response_iu *ssp_response; + + ssp_response = (struct sci_ssp_response_iu *)this_request->response_buffer; + + response_buffer = scic_cb_ssp_task_request_get_response_data_address( + this_request->user_request + ); + + user_response_length = scic_cb_ssp_task_request_get_response_data_length( + this_request->user_request + ); + + core_response_length = sci_ssp_get_response_data_length( + ssp_response->response_data_length + ); + + user_response_length = min(user_response_length, core_response_length); + + memcpy(response_buffer, ssp_response->data, user_response_length); +} + +/* + * ***************************************************************************** + * * DEFAULT STATE HANDLERS + * ***************************************************************************** */ + +/** + * scic_sds_request_default_start_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_start() request. The default action is + * to log a warning and return a failure status. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_request_default_start_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *scic_request = + (struct scic_sds_request *)request; + + dev_warn(scic_to_dev(scic_request->owning_controller), + "%s: SCIC IO Request requested to start while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state( + &((struct scic_sds_request *)request)->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_request_default_abort_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *scic_request = + (struct scic_sds_request *)request; + + dev_warn(scic_to_dev(scic_request->owning_controller), + "%s: SCIC IO Request requested to abort while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state( + &((struct scic_sds_request *)request)->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * scic_sds_request_default_complete_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_complete() request. The default action + * is to log a warning and return a failure status. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_request_default_complete_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *scic_request = + (struct scic_sds_request *)request; + + dev_warn(scic_to_dev(scic_request->owning_controller), + "%s: SCIC IO Request requested to complete while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state( + &((struct scic_sds_request *)request)->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * scic_sds_request_default_destruct_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_complete() request. The default action + * is to log a warning and return a failure status. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_request_default_destruct_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *scic_request = + (struct scic_sds_request *)request; + + dev_warn(scic_to_dev(scic_request->owning_controller), + "%s: SCIC IO Request requested to destroy while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state( + &((struct scic_sds_request *)request)->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * scic_sds_request_default_tc_completion_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_task_request_complete() request. The default + * action is to log a warning and return a failure status. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_request_default_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + dev_warn(scic_to_dev(this_request->owning_controller), + "%s: SCIC IO Request given task completion notification %x " + "while in wrong state %d\n", + __func__, + completion_code, + sci_base_state_machine_get_state( + &this_request->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; + +} + +/** + * scic_sds_request_default_event_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_event_handler() request. The default + * action is to log a warning and return a failure status. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_request_default_event_handler( + struct scic_sds_request *this_request, + u32 event_code) +{ + dev_warn(scic_to_dev(this_request->owning_controller), + "%s: SCIC IO Request given event code notification %x while " + "in wrong state %d\n", + __func__, + event_code, + sci_base_state_machine_get_state( + &this_request->parent.state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * scic_sds_request_default_frame_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_event_handler() request. The default + * action is to log a warning and return a failure status. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_request_default_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index) +{ + dev_warn(scic_to_dev(this_request->owning_controller), + "%s: SCIC IO Request given unexpected frame %x while in " + "state %d\n", + __func__, + frame_index, + sci_base_state_machine_get_state( + &this_request->parent.state_machine)); + + scic_sds_controller_release_frame( + this_request->owning_controller, frame_index); + + return SCI_FAILURE_INVALID_STATE; +} + +/* + * ***************************************************************************** + * * CONSTRUCTED STATE HANDLERS + * ***************************************************************************** */ + +/** + * scic_sds_request_constructed_state_start_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method implements the action taken when a constructed + * SCIC_SDS_IO_REQUEST_T object receives a scic_sds_request_start() request. + * This method will, if necessary, allocate a TCi for the io request object and + * then will, if necessary, copy the constructed TC data into the actual TC + * buffer. If everything is successful the post context field is updated with + * the TCi so the controller can post the request to the hardware. enum sci_status + * SCI_SUCCESS SCI_FAILURE_INSUFFICIENT_RESOURCES + */ +static enum sci_status scic_sds_request_constructed_state_start_handler( + struct sci_base_request *request) +{ + struct scu_task_context *task_context; + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + + if (this_request->io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + this_request->io_tag = + scic_controller_allocate_io_tag(this_request->owning_controller); + } + + /* Record the IO Tag in the request */ + if (this_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { + task_context = this_request->task_context_buffer; + + task_context->task_index = scic_sds_io_tag_get_index(this_request->io_tag); + + switch (task_context->protocol_type) { + case SCU_TASK_CONTEXT_PROTOCOL_SMP: + case SCU_TASK_CONTEXT_PROTOCOL_SSP: + /* SSP/SMP Frame */ + task_context->type.ssp.tag = this_request->io_tag; + task_context->type.ssp.target_port_transfer_tag = 0xFFFF; + break; + + case SCU_TASK_CONTEXT_PROTOCOL_STP: + /* + * STP/SATA Frame + * task_context->type.stp.ncq_tag = this_request->ncq_tag; */ + break; + + case SCU_TASK_CONTEXT_PROTOCOL_NONE: + /* / @todo When do we set no protocol type? */ + break; + + default: + /* This should never happen since we build the IO requests */ + break; + } + + /* + * Check to see if we need to copy the task context buffer + * or have been building into the task context buffer */ + if (this_request->was_tag_assigned_by_user == false) { + scic_sds_controller_copy_task_context( + this_request->owning_controller, this_request + ); + } + + /* Add to the post_context the io tag value */ + this_request->post_context |= scic_sds_io_tag_get_index(this_request->io_tag); + + /* Everything is good go ahead and change state */ + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_STARTED + ); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INSUFFICIENT_RESOURCES; +} + +/** + * scic_sds_request_constructed_state_abort_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_terminate() request. Since the request + * has not yet been posted to the hardware the request transitions to the + * completed state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_constructed_state_abort_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + + /* + * This request has been terminated by the user make sure that the correct + * status code is returned */ + scic_sds_request_set_status( + this_request, + SCU_TASK_DONE_TASK_ABORT, + SCI_FAILURE_IO_TERMINATED + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * STARTED STATE HANDLERS + * ***************************************************************************** */ + +/** + * scic_sds_request_started_state_abort_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_terminate() request. Since the request + * has been posted to the hardware the io request state is changed to the + * aborting state. enum sci_status SCI_SUCCESS + */ +enum sci_status scic_sds_request_started_state_abort_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + + if (this_request->has_started_substate_machine) { + sci_base_state_machine_stop(&this_request->started_substate_machine); + } + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_ABORTING + ); + + return SCI_SUCCESS; +} + +/** + * scic_sds_request_started_state_tc_completion_handler() - This method process + * TC (task context) completions for normal IO request (i.e. Task/Abort + * Completions of type 0). This method will update the + * SCIC_SDS_IO_REQUEST_T::status field. + * @this_request: This parameter specifies the request for which a completion + * occurred. + * @completion_code: This parameter specifies the completion code received from + * the SCU. + * + */ +enum sci_status scic_sds_request_started_state_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + u8 data_present; + struct sci_ssp_response_iu *response_buffer; + + /** + * @todo Any SDMA return code of other than 0 is bad + * decode 0x003C0000 to determine SDMA status + */ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): + { + /* + * There are times when the SCU hardware will return an early response + * because the io request specified more data than is returned by the + * target device (mode pages, inquiry data, etc.). We must check the + * response stats to see if this is truly a failed request or a good + * request that just got completed early. */ + struct sci_ssp_response_iu *response = (struct sci_ssp_response_iu *) + this_request->response_buffer; + scic_word_copy_with_swap( + this_request->response_buffer, + this_request->response_buffer, + sizeof(struct sci_ssp_response_iu) / sizeof(u32) + ); + + if (response->status == 0) { + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY + ); + } else { + scic_sds_request_set_status( + this_request, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + } + } + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): + scic_word_copy_with_swap( + this_request->response_buffer, + this_request->response_buffer, + sizeof(struct sci_ssp_response_iu) / sizeof(u32) + ); + + scic_sds_request_set_status( + this_request, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): + /* + * / @todo With TASK_DONE_RESP_LEN_ERR is the response frame guaranteed + * / to be received before this completion status is posted? */ + response_buffer = + (struct sci_ssp_response_iu *)this_request->response_buffer; + data_present = + response_buffer->data_present & SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK; + + if ((data_present == 0x01) || (data_present == 0x02)) { + scic_sds_request_set_status( + this_request, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + } else { + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + } + break; + + /* only stp device gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): + if (this_request->protocol == SCIC_STP_PROTOCOL) { + scic_sds_request_set_status( + this_request, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED + ); + } else { + scic_sds_request_set_status( + this_request, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + } + break; + + /* both stp/ssp device gets suspended */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): + scic_sds_request_set_status( + this_request, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED + ); + break; + + /* neither ssp nor stp gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): + default: + scic_sds_request_set_status( + this_request, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + break; + } + + /** + * @todo This is probably wrong for ACK/NAK timeout conditions + */ + + /* In all cases we will treat this as the completion of the IO request. */ + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + return SCI_SUCCESS; +} + +/** + * scic_sds_request_started_state_frame_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * @frame_index: This is the index of the unsolicited frame to be processed. + * + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_frame_handler() request. This method + * first determines the frame type received. If this is a response frame then + * the response data is copied to the io request response buffer for processing + * at completion time. If the frame type is not a response buffer an error is + * logged. enum sci_status SCI_SUCCESS SCI_FAILURE_INVALID_PARAMETER_VALUE + */ +static enum sci_status scic_sds_request_started_state_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index) +{ + enum sci_status status; + struct sci_ssp_frame_header *frame_header; + + /* / @todo If this is a response frame we must record that we received it */ + status = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_request_get_controller(this_request)->uf_control), + frame_index, + (void **)&frame_header + ); + + if (frame_header->frame_type == SCI_SAS_RESPONSE_FRAME) { + struct sci_ssp_response_iu *response_buffer; + + status = scic_sds_unsolicited_frame_control_get_buffer( + &(scic_sds_request_get_controller(this_request)->uf_control), + frame_index, + (void **)&response_buffer + ); + + scic_word_copy_with_swap( + this_request->response_buffer, + (u32 *)response_buffer, + sizeof(struct sci_ssp_response_iu) + ); + + response_buffer = (struct sci_ssp_response_iu *)this_request->response_buffer; + + if ((response_buffer->data_present == 0x01) || + (response_buffer->data_present == 0x02)) { + scic_sds_request_set_status( + this_request, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + } else + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + } else + /* This was not a response frame why did it get forwarded? */ + dev_err(scic_to_dev(this_request->owning_controller), + "%s: SCIC IO Request 0x%p received unexpected " + "frame %d type 0x%02x\n", + __func__, + this_request, + frame_index, + frame_header->frame_type); + + /* + * In any case we are done with this frame buffer return it to the + * controller */ + scic_sds_controller_release_frame( + this_request->owning_controller, frame_index + ); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * COMPLETED STATE HANDLERS + * ***************************************************************************** */ + + +/** + * scic_sds_request_completed_state_complete_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_complete() request. This method frees up + * any io request resources that have been allocated and transitions the + * request to its final state. Consider stopping the state machine instead of + * transitioning to the final state? enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_completed_state_complete_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + + if (this_request->was_tag_assigned_by_user != true) { + scic_controller_free_io_tag( + this_request->owning_controller, this_request->io_tag + ); + } + + if (this_request->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) { + scic_sds_controller_release_frame( + this_request->owning_controller, this_request->saved_rx_frame_index); + } + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_FINAL + ); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * ABORTING STATE HANDLERS + * ***************************************************************************** */ + +/** + * scic_sds_request_aborting_state_abort_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_terminate() request. This method is the + * io request aborting state abort handlers. On receipt of a multiple + * terminate requests the io request will transition to the completed state. + * This should not happen in normal operation. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_aborting_state_abort_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + return SCI_SUCCESS; +} + +/** + * scic_sds_request_aborting_state_tc_completion_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_task_completion() request. This method + * decodes the completion type waiting for the abort task complete + * notification. When the abort task complete is received the io request + * transitions to the completed state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): + case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + + default: + /* + * Unless we get some strange error wait for the task abort to complete + * TODO: Should there be a state change for this completion? */ + break; + } + + return SCI_SUCCESS; +} + +/** + * scic_sds_request_aborting_state_frame_handler() - + * @request: This is the struct sci_base_request object that is cast to the + * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. + * + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_frame_handler() request. This method + * discards the unsolicited frame since we are waiting for the abort task + * completion. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_aborting_state_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index) +{ + /* TODO: Is it even possible to get an unsolicited frame in the aborting state? */ + + scic_sds_controller_release_frame( + this_request->owning_controller, frame_index); + + return SCI_SUCCESS; +} + +/* --------------------------------------------------------------------------- */ + +const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { + [SCI_BASE_REQUEST_STATE_INITIAL] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_default_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + }, + [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { + .parent.start_handler = scic_sds_request_constructed_state_start_handler, + .parent.abort_handler = scic_sds_request_constructed_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + }, + [SCI_BASE_REQUEST_STATE_STARTED] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_started_state_frame_handler, + }, + [SCI_BASE_REQUEST_STATE_COMPLETED] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_default_abort_handler, + .parent.complete_handler = scic_sds_request_completed_state_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + }, + [SCI_BASE_REQUEST_STATE_ABORTING] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_aborting_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_aborting_state_frame_handler, + }, + [SCI_BASE_REQUEST_STATE_FINAL] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_default_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + }, +}; + +/** + * scic_sds_request_initial_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occurring. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_INITIAL state. This state is entered when the initial + * base request is constructed. Entry into the initial state sets all handlers + * for the io request object to their default handlers. none + */ +static void scic_sds_request_initial_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_INITIAL + ); +} + +/** + * scic_sds_request_constructed_state_enter() - + * @object: The io request object that is to enter the constructed state. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_CONSTRUCTED state. The method sets the state handlers + * for the the constructed state. none + */ +static void scic_sds_request_constructed_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_CONSTRUCTED + ); +} + +/** + * scic_sds_request_started_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occuring. This is cast into a SCIC_SDS_IO_REQUEST object. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_STARTED state. If the io request object type is a + * SCSI Task request we must enter the started substate machine. none + */ +static void scic_sds_request_started_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_STARTED + ); + + /* + * Most of the request state machines have a started substate machine so + * start its execution on the entry to the started state. */ + if (this_request->has_started_substate_machine == true) + sci_base_state_machine_start(&this_request->started_substate_machine); +} + +/** + * scic_sds_request_started_state_exit() - + * @object: This parameter specifies the base object for which the state + * transition is occuring. This object is cast into a SCIC_SDS_IO_REQUEST + * object. + * + * This method implements the actions taken when exiting the + * SCI_BASE_REQUEST_STATE_STARTED state. For task requests the action will be + * to stop the started substate machine. none + */ +static void scic_sds_request_started_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + if (this_request->has_started_substate_machine == true) + sci_base_state_machine_stop(&this_request->started_substate_machine); +} + +/** + * scic_sds_request_completed_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occuring. This object is cast into a SCIC_SDS_IO_REQUEST + * object. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_COMPLETED state. This state is entered when the + * SCIC_SDS_IO_REQUEST has completed. The method will decode the request + * completion status and convert it to an enum sci_status to return in the + * completion callback function. none + */ +static void scic_sds_request_completed_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + /* Tell the SCI_USER that the IO request is complete */ + if (this_request->is_task_management_request == false) { + scic_cb_io_request_complete( + scic_sds_request_get_controller(this_request), + scic_sds_request_get_device(this_request), + this_request, + this_request->sci_status + ); + } else { + scic_cb_task_request_complete( + scic_sds_request_get_controller(this_request), + scic_sds_request_get_device(this_request), + this_request, + this_request->sci_status + ); + } +} + +/** + * scic_sds_request_aborting_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occuring. This object is cast into a SCIC_SDS_IO_REQUEST + * object. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_ABORTING state. none + */ +static void scic_sds_request_aborting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + /* Setting the abort bit in the Task Context is required by the silicon. */ + this_request->task_context_buffer->abort = 1; + + SET_STATE_HANDLER( + this_request, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_ABORTING + ); +} + +/** + * scic_sds_request_final_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occuring. This is cast into a SCIC_SDS_IO_REQUEST object. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_FINAL state. The only action required is to put the + * state handlers in place. none + */ +static void scic_sds_request_final_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_FINAL + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_request_state_table[] = { + [SCI_BASE_REQUEST_STATE_INITIAL] = { + .enter_state = scic_sds_request_initial_state_enter, + }, + [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { + .enter_state = scic_sds_request_constructed_state_enter, + }, + [SCI_BASE_REQUEST_STATE_STARTED] = { + .enter_state = scic_sds_request_started_state_enter, + .exit_state = scic_sds_request_started_state_exit + }, + [SCI_BASE_REQUEST_STATE_COMPLETED] = { + .enter_state = scic_sds_request_completed_state_enter, + }, + [SCI_BASE_REQUEST_STATE_ABORTING] = { + .enter_state = scic_sds_request_aborting_state_enter, + }, + [SCI_BASE_REQUEST_STATE_FINAL] = { + .enter_state = scic_sds_request_final_state_enter, + }, +}; + diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h new file mode 100644 index 0000000..0691a75 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -0,0 +1,484 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_IO_REQUEST_H_ +#define _SCIC_SDS_IO_REQUEST_H_ + +/** + * This file contains the structures, constants and prototypes for the + * SCIC_SDS_IO_REQUEST object. + * + * + */ + +#include "scic_io_request.h" + +#include "sci_base_request.h" +#include "scu_task_context.h" +#include "intel_sas.h" + +struct scic_sds_controller; +struct scic_sds_remote_device; +struct scic_sds_io_request_state_handler; + +/** + * enum _SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATES - This enumeration + * depicts all of the substates for a task management request to be + * performed in the STARTED super-state. + * + * + */ +enum scic_sds_raw_request_started_task_mgmt_substates { + /** + * The AWAIT_TC_COMPLETION sub-state indicates that the started raw + * task management request is waiting for the transmission of the + * initial frame (i.e. command, task, etc.). + */ + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION, + + /** + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE, +}; + + +/** + * enum _SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATES - This enumeration depicts all + * of the substates for a SMP request to be performed in the STARTED + * super-state. + * + * + */ +enum scic_sds_smp_request_started_substates { + /** + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE, + + /** + * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP request is + * waiting for the transmission of the initial frame (i.e. command, task, etc.). + */ + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, +}; + +/** + * struct SCIC_SDS_IO_REQUEST - This structure contains or references all of + * the data necessary to process a task management or normal IO request. + * + * + */ +struct scic_sds_request { + /** + * This field indictes the parent object of the request. + */ + struct sci_base_request parent; + + void *user_request; + + /** + * This field simply points to the controller to which this IO request + * is associated. + */ + struct scic_sds_controller *owning_controller; + + /** + * This field simply points to the remote device to which this IO request + * is associated. + */ + struct scic_sds_remote_device *target_device; + + /** + * This field is utilized to determine if the SCI user is managing + * the IO tag for this request or if the core is managing it. + */ + bool was_tag_assigned_by_user; + + /** + * This field indicates the IO tag for this request. The IO tag is + * comprised of the task_index and a sequence count. The sequence count + * is utilized to help identify tasks from one life to another. + */ + u16 io_tag; + + /** + * This field specifies the protocol being utilized for this + * IO request. + */ + SCIC_TRANSPORT_PROTOCOL protocol; + + /** + * This field indicates the completion status taken from the SCUs + * completion code. It indicates the completion result for the SCU hardware. + */ + u32 scu_status; + + /** + * This field indicates the completion status returned to the SCI user. It + * indicates the users view of the io request completion. + */ + u32 sci_status; + + /** + * This field contains the value to be utilized when posting (e.g. Post_TC, + * Post_TC_Abort) this request to the silicon. + */ + u32 post_context; + + void *command_buffer; + void *response_buffer; + struct scu_task_context *task_context_buffer; + struct scu_sgl_element_pair *sgl_element_pair_buffer; + + /** + * This field indicates if this request is a task management request or + * normal IO request. + */ + bool is_task_management_request; + + /** + * This field indicates that this request contains an initialized started + * substate machine. + */ + bool has_started_substate_machine; + + /** + * This field is a pointer to the stored rx frame data. It is used in STP + * internal requests and SMP response frames. If this field is non-NULL the + * saved frame must be released on IO request completion. + * + * @todo In the future do we want to keep a list of RX frame buffers? + */ + u32 saved_rx_frame_index; + + /** + * This field specifies the data necessary to manage the sub-state + * machine executed while in the SCI_BASE_REQUEST_STATE_STARTED state. + */ + struct sci_base_state_machine started_substate_machine; + + /** + * This field specifies the current state handlers in place for this + * IO Request object. This field is updated each time the request + * changes state. + */ + const struct scic_sds_io_request_state_handler *state_handlers; + + /** + * This field in the recorded device sequence for the io request. This is + * recorded during the build operation and is compared in the start + * operation. If the sequence is different then there was a change of + * devices from the build to start operations. + */ + u8 device_sequence; + +}; + + +typedef enum sci_status +(*scic_sds_io_request_frame_handler_t)(struct scic_sds_request *req, u32 frame); + +typedef enum sci_status +(*scic_sds_io_request_event_handler_t)(struct scic_sds_request *req, u32 event); + +typedef enum sci_status +(*scic_sds_io_request_task_completion_handler_t)(struct scic_sds_request *req, u32 completion_code); + +/** + * struct scic_sds_io_request_state_handler - This is the SDS core definition + * of the state handlers. + * + * + */ +struct scic_sds_io_request_state_handler { + struct sci_base_request_state_handler parent; + + scic_sds_io_request_task_completion_handler_t tc_completion_handler; + scic_sds_io_request_event_handler_t event_handler; + scic_sds_io_request_frame_handler_t frame_handler; + +}; + +extern const struct sci_base_state scic_sds_request_state_table[]; +extern const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[]; + +extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[]; +extern const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[]; + +extern const struct sci_base_state scic_sds_smp_request_started_substate_table[]; +extern const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[]; + +/** + * + * + * This macro returns the maximum number of SGL element paris that we will + * support in a single IO request. + */ +#define SCU_MAX_SGL_ELEMENT_PAIRS ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2) + +/** + * scic_sds_request_get_controller() - + * + * This macro will return the controller for this io request object + */ +#define scic_sds_request_get_controller(this_request) \ + ((this_request)->owning_controller) + +/** + * scic_sds_request_get_device() - + * + * This macro will return the device for this io request object + */ +#define scic_sds_request_get_device(this_request) \ + ((this_request)->target_device) + +/** + * scic_sds_request_get_port() - + * + * This macro will return the port for this io request object + */ +#define scic_sds_request_get_port(this_request) \ + scic_sds_remote_device_get_port(scic_sds_request_get_device(this_request)) + +/** + * scic_sds_request_get_post_context() - + * + * This macro returns the constructed post context result for the io request. + */ +#define scic_sds_request_get_post_context(this_request) \ + ((this_request)->post_context) + +/** + * scic_sds_request_get_task_context() - + * + * This is a helper macro to return the os handle for this request object. + */ +#define scic_sds_request_get_task_context(request) \ + ((request)->task_context_buffer) + +#define CACHE_LINE_SIZE (64) +#define scic_sds_request_align_task_context_buffer(address) \ + ((struct scu_task_context *)(\ + (((unsigned long)(address)) + (CACHE_LINE_SIZE - 1)) \ + & ~(CACHE_LINE_SIZE - 1) \ + )) + +/** + * scic_sds_request_align_sgl_element_buffer() - + * + * This macro will align the memory address so that it is correct for the SCU + * hardware to DMA the SGL element pairs. + */ +#define scic_sds_request_align_sgl_element_buffer(address) \ + ((struct scu_sgl_element_pair *)(\ + ((char *)(address)) \ + + (\ + ((~(unsigned long)(address)) + 1) \ + & (sizeof(struct scu_sgl_element_pair) - 1) \ + ) \ + )) + +/** + * scic_sds_request_set_status() - + * + * This macro will set the scu hardware status and sci request completion + * status for an io request. + */ +#define scic_sds_request_set_status(request, scu_status_code, sci_status_code) \ + { \ + (request)->scu_status = (scu_status_code); \ + (request)->sci_status = (sci_status_code); \ + } + +#define scic_sds_request_complete(a_request) \ + ((a_request)->state_handlers->parent.complete_handler(&(a_request)->parent)) + + + + +/** + * scic_sds_io_request_tc_completion() - + * + * This macro invokes the core state task completion handler for the + * SCIC_SDS_IO_REQUEST_T object. + */ +#define scic_sds_io_request_tc_completion(this_request, completion_code) \ + { \ + if (this_request->parent.state_machine.current_state_id \ + == SCI_BASE_REQUEST_STATE_STARTED \ + && this_request->has_started_substate_machine \ + == false) \ + scic_sds_request_started_state_tc_completion_handler(this_request, completion_code); \ + else \ + this_request->state_handlers->tc_completion_handler(this_request, completion_code); \ + } + +/** + * SCU_SGL_ZERO() - + * + * This macro zeros the hardware SGL element data + */ +#define SCU_SGL_ZERO(scu_sge) \ + { \ + (scu_sge).length = 0; \ + (scu_sge).address_lower = 0; \ + (scu_sge).address_upper = 0; \ + (scu_sge).address_modifier = 0; \ + } + +/** + * SCU_SGL_COPY() - + * + * This macro copys the SGL Element data from the host os to the hardware SGL + * elment data + */ +#define SCU_SGL_COPY(os_handle, scu_sge, os_sge) \ + { \ + (scu_sge).length = \ + scic_cb_sge_get_length_field(os_handle, os_sge); \ + (scu_sge).address_upper = \ + upper_32_bits(scic_cb_sge_get_address_field(os_handle, os_sge)); \ + (scu_sge).address_lower = \ + lower_32_bits(scic_cb_sge_get_address_field(os_handle, os_sge)); \ + (scu_sge).address_modifier = 0; \ + } + +/* + * ***************************************************************************** + * * CORE REQUEST PROTOTYPES + * ***************************************************************************** */ + +void scic_sds_request_build_sgl( + struct scic_sds_request *this_request); + + + +void scic_sds_stp_request_assign_buffers( + struct scic_sds_request *this_request); + +void scic_sds_smp_request_assign_buffers( + struct scic_sds_request *this_request); + +/* --------------------------------------------------------------------------- */ + +enum sci_status scic_sds_request_start( + struct scic_sds_request *this_request); + +enum sci_status scic_sds_io_request_terminate( + struct scic_sds_request *this_request); + +enum sci_status scic_sds_io_request_complete( + struct scic_sds_request *this_request); + +void scic_sds_io_request_copy_response( + struct scic_sds_request *this_request); + +enum sci_status scic_sds_io_request_event_handler( + struct scic_sds_request *this_request, + u32 event_code); + +enum sci_status scic_sds_io_request_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index); + + +enum sci_status scic_sds_task_request_terminate( + struct scic_sds_request *this_request); + +/* + * ***************************************************************************** + * * DEFAULT STATE HANDLERS + * ***************************************************************************** */ + +enum sci_status scic_sds_request_default_start_handler( + struct sci_base_request *this_request); + + +enum sci_status scic_sds_request_default_complete_handler( + struct sci_base_request *this_request); + +enum sci_status scic_sds_request_default_destruct_handler( + struct sci_base_request *this_request); + +enum sci_status scic_sds_request_default_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code); + +enum sci_status scic_sds_request_default_event_handler( + struct scic_sds_request *this_request, + u32 event_code); + +enum sci_status scic_sds_request_default_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index); + +/* + * ***************************************************************************** + * * STARTED STATE HANDLERS + * ***************************************************************************** */ + +enum sci_status scic_sds_request_started_state_abort_handler( + struct sci_base_request *this_request); + +enum sci_status scic_sds_request_started_state_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code); + +#endif /* _SCIC_SDS_IO_REQUEST_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c new file mode 100644 index 0000000..7cf78d3 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -0,0 +1,410 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains This file contains the ready substate handlers for a SMP + * device. + * + * + */ + +#include "sci_environment.h" +#include "scic_user_callback.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "scic_sds_request.h" +#include "scu_event_codes.h" +#include "scu_task_context.h" + + +/* + * ***************************************************************************** + * * SMP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @[in]: device The device the io is sent to. + * @[in]: request The io to start. + * + * This method will handle the start io operation for a SMP device that is in + * the idle state. enum sci_status + */ +static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status status; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *io_request = (struct scic_sds_request *)request; + + /* Will the port allow the io request to start? */ + status = this_device->owning_port->state_handlers->start_io_handler( + this_device->owning_port, + this_device, + io_request + ); + + if (status == SCI_SUCCESS) { + status = + scic_sds_remote_node_context_start_io(this_device->rnc, io_request); + + if (status == SCI_SUCCESS) { + status = scic_sds_request_start(io_request); + } + + if (status == SCI_SUCCESS) { + this_device->working_request = io_request; + + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD + ); + } + + scic_sds_remote_device_start_request(this_device, io_request, status); + } + + return status; +} + + +/* + * ****************************************************************************** + * * SMP REMOTE DEVICE READY SUBSTATE CMD HANDLERS + * ****************************************************************************** */ +/** + * + * @device: This is the device object that is receiving the IO. + * @request: The io to start. + * + * This device is already handling a command it can not accept new commands + * until this one is complete. enum sci_status + */ +static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + return SCI_FAILURE_INVALID_STATE; +} + + +/** + * this is the complete_io_handler for smp device at ready cmd substate. + * @device: This is the device object that is receiving the IO. + * @request: The io to start. + * + * enum sci_status + */ +static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status status; + struct scic_sds_remote_device *this_device; + struct scic_sds_request *the_request; + + this_device = (struct scic_sds_remote_device *)device; + the_request = (struct scic_sds_request *)request; + + status = scic_sds_io_request_complete(the_request); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + this_device->owning_port, this_device, the_request); + + if (status == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(this_device); + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE + ); + } else + dev_err(scirdev_to_dev(this_device), + "%s: SCIC SDS Remote Device 0x%p io request " + "0x%p could not be completd on the port 0x%p " + "failed with status %d.\n", + __func__, + this_device, + the_request, + this_device->owning_port, + status); + } + + return status; +} + +/** + * This is frame handler for smp device ready cmd substate. + * @this_device: This is the device object that is receiving the frame. + * @frame_index: The index for the frame received. + * + * enum sci_status + */ +static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index) +{ + enum sci_status status; + + /* + * / The device does not process any UF received from the hardware while + * / in this state. All unsolicited frames are forwarded to the io request + * / object. */ + status = scic_sds_io_request_frame_handler( + this_device->working_request, + frame_index + ); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_remote_device_state_handler +scic_sds_smp_remote_device_ready_substate_handler_table[ + SCIC_SDS_SMP_REMOTE_DEVICE_READY_MAX_SUBSTATES] = +{ + /* SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, + scic_sds_remote_device_default_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_remote_device_default_frame_handler + }, + /* SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_default_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, + scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_remote_device_default_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_smp_remote_device_ready_cmd_substate_frame_handler + } +}; +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the enter and exit functions for the + * struct scic_sds_remote_device ready substate machine. + * + * + */ + +#include "scic_remote_device.h" +#include "scic_user_callback.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "sci_util.h" +#include "sci_environment.h" + +/** + * + * @object: This is the struct sci_base_object which is cast into a + * struct scic_sds_remote_device. + * + * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE enter method. + * This method sets the ready cmd substate handlers and reports the device as + * ready. none + */ +static void scic_sds_smp_remote_device_ready_idle_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + this_device, + scic_sds_smp_remote_device_ready_substate_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE + ); + + scic_cb_remote_device_ready( + scic_sds_remote_device_get_controller(this_device), this_device); +} + +/** + * + * @object: This is the struct sci_base_object which is cast into a + * struct scic_sds_remote_device. + * + * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD enter method. This + * method sets the remote device objects ready cmd substate handlers, and + * notify core user that the device is not ready. none + */ +static void scic_sds_smp_remote_device_ready_cmd_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + BUG_ON(this_device->working_request == NULL); + + SET_STATE_HANDLER( + this_device, + scic_sds_smp_remote_device_ready_substate_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD + ); + + scic_cb_remote_device_not_ready( + scic_sds_remote_device_get_controller(this_device), + this_device, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED + ); +} + +/** + * + * @object: This is the struct sci_base_object which is cast into a + * struct scic_sds_remote_device. + * + * This is the SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_CMD exit method. none + */ +static void scic_sds_smp_remote_device_ready_cmd_substate_exit( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + + this_device->working_request = NULL; +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[] = { + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, + }, + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, + .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, + }, +}; diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c new file mode 100644 index 0000000..949d23e --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -0,0 +1,669 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "intel_sas.h" +#include "sci_base_state_machine.h" +#include "scic_controller.h" +#include "scic_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_request.h" +#include "scic_sds_smp_request.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_completion_codes.h" +#include "scu_task_context.h" + +static void scu_smp_request_construct_task_context( + struct scic_sds_request *this_request, + struct smp_request *smp_request); + +/** + * + * + * This method return the memory space required for STP PIO requests. u32 + */ +u32 scic_sds_smp_request_get_object_size(void) +{ + return sizeof(struct scic_sds_request) + + sizeof(struct smp_request) + + sizeof(struct smp_response) + + sizeof(struct scu_task_context); +} + +/** + * scic_sds_smp_request_get_command_buffer() - + * + * This macro returns the address of the smp command buffer in the smp request + * memory. No need to cast to SMP request type. + */ +#define scic_sds_smp_request_get_command_buffer(memory) \ + (((char *)(memory)) + sizeof(struct scic_sds_request)) + +/** + * scic_sds_smp_request_get_response_buffer() - + * + * This macro returns the address of the smp response buffer in the smp request + * memory. + */ +#define scic_sds_smp_request_get_response_buffer(memory) \ + (((char *)(scic_sds_smp_request_get_command_buffer(memory))) \ + + sizeof(struct smp_request)) + +/** + * scic_sds_smp_request_get_task_context_buffer() - + * + * This macro returs the task context buffer for the SMP request. + */ +#define scic_sds_smp_request_get_task_context_buffer(memory) \ + ((struct scu_task_context *)(\ + ((char *)(scic_sds_smp_request_get_response_buffer(memory))) \ + + sizeof(struct smp_response) \ + )) + + + +/** + * This method build the remainder of the IO request object. + * @this_request: This parameter specifies the request object being constructed. + * + * The scic_sds_general_request_construct() must be called before this call is + * valid. none + */ + +void scic_sds_smp_request_assign_buffers( + struct scic_sds_request *this_request) +{ + /* Assign all of the buffer pointers */ + this_request->command_buffer = + scic_sds_smp_request_get_command_buffer(this_request); + this_request->response_buffer = + scic_sds_smp_request_get_response_buffer(this_request); + this_request->sgl_element_pair_buffer = NULL; + + if (this_request->was_tag_assigned_by_user == false) { + this_request->task_context_buffer = + scic_sds_smp_request_get_task_context_buffer(this_request); + this_request->task_context_buffer = + scic_sds_request_align_task_context_buffer(this_request->task_context_buffer); + } + +} +/** + * This method is called by the SCI user to build an SMP IO request. + * + * - The user must have previously called scic_io_request_construct() on the + * supplied IO request. Indicate if the controller successfully built the IO + * request. SCI_SUCCESS This value is returned if the IO request was + * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned + * if the remote_device does not support the SMP protocol. + * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not + * properly set the association between the SCIC IO request and the user's IO + * request. Please refer to the sci_object_set_association() routine for more + * information. + */ +enum sci_status scic_io_request_construct_smp( + struct scic_sds_request *sci_req) +{ + struct smp_request *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); + + if (!smp_req) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + + sci_req->protocol = SCIC_SMP_PROTOCOL; + sci_req->has_started_substate_machine = true; + + /* Construct the started sub-state machine. */ + sci_base_state_machine_construct( + &sci_req->started_substate_machine, + &sci_req->parent.parent, + scic_sds_smp_request_started_substate_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE + ); + + /* Construct the SMP SCU Task Context */ + memcpy(smp_req, sci_req->command_buffer, sizeof(*smp_req)); + + /* + * Look at the SMP requests' header fields; for certain SAS 1.x SMP + * functions under SAS 2.0, a zero request length really indicates + * a non-zero default length. */ + if (smp_req->header.request_length == 0) { + switch (smp_req->header.function) { + case SMP_FUNCTION_DISCOVER: + case SMP_FUNCTION_REPORT_PHY_ERROR_LOG: + case SMP_FUNCTION_REPORT_PHY_SATA: + case SMP_FUNCTION_REPORT_ROUTE_INFORMATION: + smp_req->header.request_length = 2; + break; + case SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION: + case SMP_FUNCTION_PHY_CONTROL: + case SMP_FUNCTION_PHY_TEST: + smp_req->header.request_length = 9; + break; + /* Default - zero is a valid default for 2.0. */ + } + } + + scu_smp_request_construct_task_context(sci_req, smp_req); + + sci_base_state_machine_change_state( + &sci_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED + ); + + kfree(smp_req); + + return SCI_SUCCESS; +} + +/** + * This method is called by the SCI user to build an SMP pass-through IO + * request. + * @scic_smp_request: This parameter specifies the handle to the io request + * object to be built. + * @passthru_cb: This parameter specifies the pointer to the callback structure + * that contains the function pointers + * + * - The user must have previously called scic_io_request_construct() on the + * supplied IO request. Indicate if the controller successfully built the IO + * request. + */ + +/** + * This method will fill in the SCU Task Context for a SMP request. The + * following important settings are utilized: -# task_type == + * SCU_TASK_TYPE_SMP. This simply indicates that a normal request type + * (i.e. non-raw frame) is being utilized to perform task management. -# + * control_frame == 1. This ensures that the proper endianess is set so + * that the bytes are transmitted in the right order for a smp request frame. + * @this_request: This parameter specifies the smp request object being + * constructed. + * + */ +static void scu_smp_request_construct_task_context( + struct scic_sds_request *this_request, + struct smp_request *smp_request) +{ + dma_addr_t physical_address; + struct scic_sds_controller *owning_controller; + struct scic_sds_remote_device *target_device; + struct scic_sds_port *target_port; + struct scu_task_context *task_context; + + /* byte swap the smp request. */ + scic_word_copy_with_swap( + this_request->command_buffer, + (u32 *)smp_request, + sizeof(struct smp_request) / sizeof(u32) + ); + + task_context = scic_sds_request_get_task_context(this_request); + + owning_controller = scic_sds_request_get_controller(this_request); + target_device = scic_sds_request_get_device(this_request); + target_port = scic_sds_request_get_port(this_request); + + /* + * Fill in the TC with the its required data + * 00h */ + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = + scic_remote_device_get_connection_rate(target_device); + task_context->protocol_engine_index = + scic_sds_controller_get_protocol_engine_group(owning_controller); + task_context->logical_port_index = + scic_sds_port_get_index(target_port); + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; + task_context->abort = 0; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + /* 04h */ + task_context->remote_node_index = this_request->target_device->rnc->remote_node_index; + task_context->command_code = 0; + task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; + + /* 08h */ + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 1; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + /* 0ch */ + task_context->address_modifier = 0; + + /* 10h */ + task_context->ssp_command_iu_length = smp_request->header.request_length; + + /* 14h */ + task_context->transfer_length_bytes = 0; + + /* + * 18h ~ 30h, protocol specific + * since commandIU has been build by framework at this point, we just + * copy the frist DWord from command IU to this location. */ + memcpy((void *)(&task_context->type.smp), this_request->command_buffer, sizeof(u32)); + + /* + * 40h + * "For SMP you could program it to zero. We would prefer that way so that + * done code will be consistent." - Venki */ + task_context->task_phase = 0; + + if (this_request->was_tag_assigned_by_user) { + /* Build the task context now since we have already read the data */ + this_request->post_context = ( + SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC + | ( + scic_sds_controller_get_protocol_engine_group(owning_controller) + << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT + ) + | ( + scic_sds_port_get_index(target_port) + << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT + ) + | scic_sds_io_tag_get_index(this_request->io_tag) + ); + } else { + /* Build the task context now since we have already read the data */ + this_request->post_context = ( + SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC + | ( + scic_sds_controller_get_protocol_engine_group(owning_controller) + << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT + ) + | ( + scic_sds_port_get_index(target_port) + << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT + ) + /* This is not assigned because we have to wait until we get a TCi */ + ); + } + + /* + * Copy the physical address for the command buffer to the SCU Task Context + * command buffer should not contain command header. */ + scic_cb_io_request_get_physical_address( + scic_sds_request_get_controller(this_request), + this_request, + ((char *)(this_request->command_buffer) + sizeof(u32)), + &physical_address + ); + + task_context->command_iu_upper = + upper_32_bits(physical_address); + task_context->command_iu_lower = + lower_32_bits(physical_address); + + + /* SMP response comes as UF, so no need to set response IU address. */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + +/** + * This method processes an unsolicited frame while the SMP request is waiting + * for a response frame. It will copy the response data, release the + * unsolicited frame, and transition the request to the + * SCI_BASE_REQUEST_STATE_COMPLETED state. + * @this_request: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This method returns an indication of whether the response frame was handled + * successfully or not. SCI_SUCCESS Currently this value is always returned and + * indicates successful processing of the TC response. + */ +static enum sci_status scic_sds_smp_request_await_response_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index) +{ + enum sci_status status; + void *frame_header; + struct smp_response_header *this_frame_header; + u8 *user_smp_buffer = this_request->response_buffer; + + status = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_request_get_controller(this_request)->uf_control), + frame_index, + &frame_header + ); + + /* byte swap the header. */ + scic_word_copy_with_swap( + (u32 *)user_smp_buffer, + frame_header, + sizeof(struct smp_response_header) / sizeof(u32) + ); + this_frame_header = (struct smp_response_header *)user_smp_buffer; + + if (this_frame_header->smp_frame_type == SMP_FRAME_TYPE_RESPONSE) { + void *smp_response_buffer; + + status = scic_sds_unsolicited_frame_control_get_buffer( + &(scic_sds_request_get_controller(this_request)->uf_control), + frame_index, + &smp_response_buffer + ); + + scic_word_copy_with_swap( + (u32 *)(user_smp_buffer + sizeof(struct smp_response_header)), + smp_response_buffer, + sizeof(union smp_response_body) / sizeof(u32) + ); + if (this_frame_header->function == SMP_FUNCTION_DISCOVER) { + struct smp_response *this_smp_response; + + this_smp_response = (struct smp_response *)user_smp_buffer; + + /* + * Some expanders only report an attached SATA device, and + * not an STP target. Since the core depends on the STP + * target attribute to correctly build I/O, set the bit now + * if necessary. */ + if (this_smp_response->response.discover.protocols.u.bits.attached_sata_device + && !this_smp_response->response.discover.protocols.u.bits.attached_stp_target) { + this_smp_response->response.discover.protocols.u.bits.attached_stp_target = 1; + + dev_dbg(scic_to_dev(this_request->owning_controller), + "%s: scic_sds_smp_request_await_response_frame_handler(0x%p) Found SATA dev, setting STP bit.\n", + __func__, this_request); + } + } + + /* + * Don't need to copy to user space. User instead will refer to + * core request's response buffer. */ + + /* + * copy the smp response to framework smp request's response buffer. + * scic_sds_smp_request_copy_response(this_request); */ + + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION + ); + } else { + /* This was not a response frame why did it get forwarded? */ + dev_err(scic_to_dev(this_request->owning_controller), + "%s: SCIC SMP Request 0x%p received unexpected frame " + "%d type 0x%02x\n", + __func__, + this_request, + frame_index, + this_frame_header->smp_frame_type); + + scic_sds_request_set_status( + this_request, + SCU_TASK_DONE_SMP_FRM_TYPE_ERR, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + } + + scic_sds_controller_release_frame( + this_request->owning_controller, frame_index + ); + + return SCI_SUCCESS; +} + + +/** + * This method processes an abnormal TC completion while the SMP request is + * waiting for a response frame. It decides what happened to the IO based + * on TC completion status. + * @this_request: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* + * In the AWAIT RESPONSE state, any TC completion is unexpected. + * but if the TC has success status, we complete the IO anyway. */ + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + /* + * These status has been seen in a specific LSI expander, which sometimes + * is not able to send smp response within 2 ms. This causes our hardware + * break the connection and set TC completion with one of these SMP_XXX_XX_ERR + * status. For these type of error, we ask scic user to retry the request. */ + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return SCI_SUCCESS; +} + + +/** + * This method processes the completions transport layer (TL) status to + * determine if the SMP request was sent successfully. If the SMP request + * was sent successfully, then the state for the SMP request transits to + * waiting for a response frame. + * @this_request: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return SCI_SUCCESS; +} + + +const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[] = { + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_smp_request_await_response_frame_handler, + }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + } +}; + +/** + * This method performs the actions required when entering the + * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This + * includes setting the IO request state handlers for this sub-state. + * @object: This parameter specifies the request object for which the sub-state + * change is occuring. + * + * none. + */ +static void scic_sds_smp_request_started_await_response_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_smp_request_started_substate_handler_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE + ); +} + +/** + * This method performs the actions required when entering the + * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION sub-state. + * This includes setting the SMP request state handlers for this sub-state. + * @object: This parameter specifies the request object for which the sub-state + * change is occuring. + * + * none. + */ +static void scic_sds_smp_request_started_await_tc_completion_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_smp_request_started_substate_handler_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION + ); +} + +const struct sci_base_state scic_sds_smp_request_started_substate_table[] = { + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { + .enter_state = scic_sds_smp_request_started_await_response_substate_enter, + }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { + .enter_state = scic_sds_smp_request_started_await_tc_completion_substate_enter, + }, +}; + diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.h b/drivers/scsi/isci/core/scic_sds_smp_request.h new file mode 100644 index 0000000..b7c5b83 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_smp_request.h @@ -0,0 +1,70 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _SCIC_SDS_SMP_REQUEST_T_ +#define _SCIC_SDS_SMP_REQUEST_T_ + +#include "intel_sas.h" +#include "sci_types.h" +#include "scic_sds_request.h" + + +u32 scic_sds_smp_request_get_object_size(void); + + +void scic_sds_smp_request_copy_response( + struct scic_sds_request *this_request); + +#endif /* _SCIC_SDS_SMP_REQUEST_T_ */ + diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c new file mode 100644 index 0000000..0d6441c --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -0,0 +1,340 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the task management substate handlers for the + * SCIC_SDS_IO_REQUEST object. + * + * + */ + +#include "intel_sas.h" +#include "sci_environment.h" +#include "scic_sds_request.h" +#include "scic_controller.h" +#include "scic_sds_controller.h" +#include "scu_completion_codes.h" +#include "scu_task_context.h" + +/** + * This method processes the completions transport layer (TL) status to + * determine if the RAW task management frame was sent successfully. If the + * raw frame was sent successfully, then the state for the task request + * transitions to waiting for a response frame. + * @this_request: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE + ); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + /* + * Currently, the decision is to simply allow the task request to + * timeout if the task IU wasn't received successfully. + * There is a potential for receiving multiple task responses if we + * decide to send the task IU again. */ + dev_warn(scic_to_dev(this_request->owning_controller), + "%s: TaskRequest:0x%p CompletionCode:%x - " + "ACK/NAK timeout\n", + __func__, + this_request, + completion_code); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return SCI_SUCCESS; +} + +/** + * This method is responsible for processing a terminate/abort request for this + * TC while the request is waiting for the task management response + * unsolicited frame. + * @this_request: This parameter specifies the request for which the + * termination was requested. + * + * This method returns an indication as to whether the abort request was + * successfully handled. need to update to ensure the received UF doesn't cause + * damage to subsequent requests (i.e. put the extended tag in a holding + * pattern for this particular device). + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_ABORTING + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + return SCI_SUCCESS; +} + +/** + * This method processes an unsolicited frame while the task mgmt request is + * waiting for a response frame. It will copy the response data, release + * the unsolicited frame, and transition the request to the + * SCI_BASE_REQUEST_STATE_COMPLETED state. + * @this_request: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This method returns an indication of whether the TC response frame was + * handled successfully or not. SCI_SUCCESS Currently this value is always + * returned and indicates successful processing of the TC response. Should + * probably update to check frame type and make sure it is a response frame. + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index) +{ + scic_sds_io_request_copy_response(this_request); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + scic_sds_controller_release_frame( + this_request->owning_controller, frame_index + ); + + return SCI_SUCCESS; +} + +const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[] = { + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, + } +}; + +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the enter/exit methods associated with each of the task + * management raw request states. For more information on the task + * management request state machine please refer to scic_sds_io_request.h + * + * + */ + +#include "scic_sds_request.h" +#include "sci_base_state_machine.h" + +/** + * This method performs the actions required when entering the + * SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION + * sub-state. This includes setting the IO request state handlers for this + * sub-state. + * @object: This parameter specifies the request object for which the sub-state + * change is occuring. + * + * none. + */ +static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_ssp_task_request_started_substate_handler_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION + ); +} + +/** + * This method performs the actions required when entering the + * SCIC_SDS_IO_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This + * includes setting the IO request state handlers for this sub-state. + * @object: This parameter specifies the request object for which the sub-state + * change is occuring. + * + * none. + */ +static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_ssp_task_request_started_substate_handler_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE + ); +} + +const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[] = { + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { + .enter_state = scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter, + }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { + .enter_state = scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter, + }, +}; + diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c new file mode 100644 index 0000000..f52a8e3 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c @@ -0,0 +1,838 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#if !defined(DISABLE_ATAPI) + +#include "intel_ata.h" +#include "intel_sas.h" +#include "intel_sata.h" +#include "intel_sat.h" +#include "sati_translator_sequence.h" +#include "sci_base_state.h" +#include "scic_controller.h" +#include "scic_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_request.h" +#include "scic_sds_stp_packet_request.h" +#include "scic_user_callback.h" +#include "sci_util.h" +#include "scu_completion_codes.h" +#include "scu_task_context.h" + + +/** + * This method will fill in the SCU Task Context for a PACKET fis. And + * construct the request STARTED sub-state machine for Packet Protocol IO. + * @this_request: This parameter specifies the stp packet request object being + * constructed. + * + */ +enum sci_status scic_sds_stp_packet_request_construct( + struct scic_sds_request *this_request) +{ + struct sata_fis_reg_h2d *h2d_fis = + scic_stp_io_request_get_h2d_reg_address( + this_request + ); + + /* + * Work around, we currently only support PACKET DMA protocol, so we + * need to make change to Packet Fis features field. */ + h2d_fis->features = h2d_fis->features | ATA_PACKET_FEATURE_DMA; + + scic_sds_stp_non_ncq_request_construct(this_request); + + /* Build the Packet Fis task context structure */ + scu_stp_raw_request_construct_task_context( + (struct scic_sds_stp_request *)this_request, + this_request->task_context_buffer + ); + + sci_base_state_machine_construct( + &this_request->started_substate_machine, + &this_request->parent.parent, + scic_sds_stp_packet_request_started_substate_table, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE + ); + + return SCI_SUCCESS; +} + + +/** + * This method will fill in the SCU Task Context for a Packet request command + * phase in PACKET DMA DATA (IN/OUT) type. The following important settings + * are utilized: -# task_type == SCU_TASK_TYPE_PACKET_DMA. This simply + * indicates that a normal request type (i.e. non-raw frame) is being + * utilized to perform task management. -# control_frame == 1. This ensures + * that the proper endianess is set so that the bytes are transmitted in the + * right order for a smp request frame. + * @this_request: This parameter specifies the smp request object being + * constructed. + * @task_context: The task_context to be reconstruct for packet request command + * phase. + * + */ +void scu_stp_packet_request_command_phase_construct_task_context( + struct scic_sds_request *this_request, + struct scu_task_context *task_context) +{ + void *atapi_cdb; + u32 atapi_cdb_length; + struct scic_sds_stp_request *stp_request = (struct scic_sds_stp_request *)this_request; + + /* + * reference: SSTL 1.13.4.2 + * task_type, sata_direction */ + if (scic_cb_io_request_get_data_direction(this_request->user_request) + == SCI_IO_REQUEST_DATA_OUT) { + task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_OUT; + task_context->sata_direction = 0; + } else { /* todo: for NO_DATA command, we need to send out raw frame. */ + task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_IN; + task_context->sata_direction = 1; + } + + /* sata header */ + memset(&(task_context->type.stp), 0, sizeof(struct STP_TASK_CONTEXT)); + task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; + + /* + * Copy in the command IU with CDB so that the commandIU address doesn't + * change. */ + memset(this_request->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); + + atapi_cdb = + scic_cb_stp_packet_io_request_get_cdb_address(this_request->user_request); + + atapi_cdb_length = + scic_cb_stp_packet_io_request_get_cdb_length(this_request->user_request); + + memcpy(((u8 *)this_request->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); + + atapi_cdb_length = + max(atapi_cdb_length, stp_request->type.packet.device_preferred_cdb_length); + + task_context->ssp_command_iu_length = + ((atapi_cdb_length % 4) == 0) ? + (atapi_cdb_length / 4) : ((atapi_cdb_length / 4) + 1); + + /* task phase is set to TX_CMD */ + task_context->task_phase = 0x1; + + /* retry counter */ + task_context->stp_retry_count = 0; + + if (scic_cb_request_is_initial_construction(this_request->user_request)) { + /* data transfer size. */ + task_context->transfer_length_bytes = + scic_cb_io_request_get_transfer_length(this_request->user_request); + + /* setup sgl */ + scic_sds_request_build_sgl(this_request); + } else { + /* data transfer size, need to be 4 bytes aligned. */ + task_context->transfer_length_bytes = (SCSI_FIXED_SENSE_DATA_BASE_LENGTH + 2); + + scic_sds_stp_packet_internal_request_sense_build_sgl(this_request); + } +} + +/** + * This method will fill in the SCU Task Context for a DATA fis containing CDB + * in Raw Frame type. The TC for previous Packet fis was already there, we + * only need to change the H2D fis content. + * @this_request: This parameter specifies the smp request object being + * constructed. + * @task_context: The task_context to be reconstruct for packet request command + * phase. + * + */ +void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( + struct scic_sds_request *this_request, + struct scu_task_context *task_context) +{ + void *atapi_cdb = + scic_cb_stp_packet_io_request_get_cdb_address(this_request->user_request); + + u32 atapi_cdb_length = + scic_cb_stp_packet_io_request_get_cdb_length(this_request->user_request); + + memset(this_request->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); + memcpy(((u8 *)this_request->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); + + memset(&(task_context->type.stp), 0, sizeof(struct STP_TASK_CONTEXT)); + task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; + + /* + * Note the data send out has to be 4 bytes aligned. Or else out hardware will + * patch non-zero bytes and cause the target device unhappy. */ + task_context->transfer_length_bytes = 12; +} + + +/* + * *@brief This methods decode the D2H status FIS and retrieve the sense data, + * then pass the sense data to user request. + * + ***@param[in] this_request The request receive D2H status FIS. + ***@param[in] status_fis The D2H status fis to be processed. + * + */ +enum sci_status scic_sds_stp_packet_request_process_status_fis( + struct scic_sds_request *this_request, + struct sata_fis_reg_d2h *status_fis) +{ + enum sci_status status = SCI_SUCCESS; + + /* TODO: Process the error status fis, retrieve sense data. */ + if (status_fis->status & ATA_STATUS_REG_ERROR_BIT) + status = SCI_FAILURE_IO_RESPONSE_VALID; + + return status; +} + +/* + * *@brief This methods builds sgl for internal REQUEST SENSE stp packet + * command using this request response buffer, only one sge is + * needed. + * + ***@param[in] this_request The request receive request sense data. + * + */ +void scic_sds_stp_packet_internal_request_sense_build_sgl( + struct scic_sds_request *this_request) +{ + void *sge; + struct scu_sgl_element_pair *scu_sgl_list = NULL; + struct scu_task_context *task_context; + dma_addr_t physical_address; + + struct sci_ssp_response_iu *rsp_iu = + (struct sci_ssp_response_iu *)this_request->response_buffer; + + sge = (void *)&rsp_iu->data[0]; + + task_context = (struct scu_task_context *)this_request->task_context_buffer; + scu_sgl_list = &task_context->sgl_pair_ab; + + scic_cb_io_request_get_physical_address( + scic_sds_request_get_controller(this_request), + this_request, + ((char *)sge), + &physical_address + ); + + scu_sgl_list->A.address_upper = sci_cb_physical_address_upper(physical_address); + scu_sgl_list->A.address_lower = sci_cb_physical_address_lower(physical_address); + scu_sgl_list->A.length = task_context->transfer_length_bytes; + scu_sgl_list->A.address_modifier = 0; + + SCU_SGL_ZERO(scu_sgl_list->B); +} + +/** + * This method processes the completions transport layer (TL) status to + * determine if the Packet FIS was sent successfully. If the Packet FIS was + * sent successfully, then the state for the Packet request transits to + * waiting for a PIO SETUP frame. + * @this_request: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +enum sci_status scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return status; +} + + +/** + * This method processes an unsolicited frame while the Packet request is + * waiting for a PIO SETUP FIS. It will release the unsolicited frame, and + * transition the request to the COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE + * state. + * @this_request: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This method returns an indication of whether the pio setup frame was handled + * successfully or not. SCI_SUCCESS Currently this value is always returned and + * indicates successful processing of the TC response. + */ +enum sci_status scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *this_request; + + this_request = (struct scic_sds_stp_request *)request; + + status = scic_sds_unsolicited_frame_control_get_header( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_header + ); + + if (status == SCI_SUCCESS) { + BUG_ON(frame_header->fis_type != SATA_FIS_TYPE_PIO_SETUP); + + /* + * Get from the frame buffer the PIO Setup Data, although we don't need + * any info from this pio setup fis. */ + scic_sds_unsolicited_frame_control_get_buffer( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_buffer + ); + + /* + * Get the data from the PIO Setup + * The SCU Hardware returns first word in the frame_header and the rest + * of the data is in the frame buffer so we need to back up one dword */ + this_request->type.packet.device_preferred_cdb_length = + (u16)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->transfter_count; + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame( + this_request->parent.owning_controller, frame_index + ); + + sci_base_state_machine_change_state( + &this_request->parent.started_substate_machine, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE + ); + } else + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, this_request, frame_index, status); + + return status; +} + + +/** + * This method processes the completions transport layer (TL) status to + * determine if the PACKET command data FIS was sent successfully. If + * successfully, then the state for the packet request transits to COMPLETE + * state. If not successfuly, the request transits to + * COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE. + * @this_request: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + u8 sat_packet_protocol = + scic_cb_request_get_sat_protocol(this_request->user_request); + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + if (sat_packet_protocol == SAT_PROTOCOL_PACKET_DMA_DATA_IN + || sat_packet_protocol == SAT_PROTOCOL_PACKET_DMA_DATA_OUT + ) + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + else + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE + ); + break; + + case (SCU_TASK_DONE_UNEXP_FIS << SCU_COMPLETION_TL_STATUS_SHIFT): + if (scic_io_request_get_number_of_bytes_transferred(this_request) < + scic_cb_io_request_get_transfer_length(this_request->user_request)) { + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + status = this_request->sci_status; + } + break; + + case (SCU_TASK_DONE_EXCESS_DATA << SCU_COMPLETION_TL_STATUS_SHIFT): + /* In this case, there is no UF coming after. compelte the IO now. */ + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + break; + + default: + if (this_request->sci_status != SCI_SUCCESS) { /* The io status was set already. This means an UF for the status + * fis was received already. + */ + + /* + * A device suspension event is expected, we need to have the device + * coming out of suspension, then complete the IO. */ + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE + ); + + /* change the device state to ATAPI_ERROR. */ + sci_base_state_machine_change_state( + &this_request->target_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR + ); + + status = this_request->sci_status; + } else { /* If receiving any non-sucess TC status, no UF received yet, then an UF for + * the status fis is coming after. + */ + scic_sds_request_set_status( + this_request, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE + ); + } + break; + } + + return status; +} + + +/** + * This method processes an unsolicited frame. + * @this_request: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This method returns an indication of whether the UF frame was handled + * successfully or not. SCI_SUCCESS Currently this value is always returned and + * indicates successful processing of the TC response. + */ +enum sci_status scic_sds_stp_packet_request_command_phase_common_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *this_request; + + this_request = (struct scic_sds_stp_request *)request; + + status = scic_sds_unsolicited_frame_control_get_header( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_header + ); + + if (status == SCI_SUCCESS) { + BUG_ON(frame_header->fis_type != SATA_FIS_TYPE_REGD2H); + + /* + * Get from the frame buffer the PIO Setup Data, although we don't need + * any info from this pio setup fis. */ + scic_sds_unsolicited_frame_control_get_buffer( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_buffer + ); + + scic_sds_controller_copy_sata_response( + &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer + ); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame( + this_request->parent.owning_controller, frame_index + ); + } + + return status; +} + +/** + * This method processes an unsolicited frame while the packet request is + * expecting TC completion. It will process the FIS and construct sense data. + * @this_request: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This method returns an indication of whether the UF frame was handled + * successfully or not. SCI_SUCCESS Currently this value is always returned and + * indicates successful processing of the TC response. + */ +enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + + enum sci_status status = + scic_sds_stp_packet_request_command_phase_common_frame_handler( + request, frame_index); + + if (status == SCI_SUCCESS) { + /* The command has completed with error status from target device. */ + status = scic_sds_stp_packet_request_process_status_fis( + request, &this_request->d2h_reg_fis); + + if (status != SCI_SUCCESS) { + scic_sds_request_set_status( + &this_request->parent, + SCU_TASK_DONE_CHECK_RESPONSE, + status + ); + } else + scic_sds_request_set_status( + &this_request->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + } + + return status; +} + + +/** + * This method processes an unsolicited frame while the packet request is + * expecting TC completion. It will process the FIS and construct sense data. + * @this_request: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This method returns an indication of whether the UF frame was handled + * successfully or not. SCI_SUCCESS Currently this value is always returned and + * indicates successful processing of the TC response. + */ +enum sci_status scic_sds_stp_packet_request_command_phase_await_d2h_fis_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + enum sci_status status = + scic_sds_stp_packet_request_command_phase_common_frame_handler( + request, frame_index); + + struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + + if (status == SCI_SUCCESS) { + /* The command has completed with error status from target device. */ + status = scic_sds_stp_packet_request_process_status_fis( + request, &this_request->d2h_reg_fis); + + if (status != SCI_SUCCESS) { + scic_sds_request_set_status( + request, + SCU_TASK_DONE_CHECK_RESPONSE, + status + ); + } else + scic_sds_request_set_status( + request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + /* + * Always complete the NON_DATA command right away, no need to delay completion + * even an error status fis came from target device. */ + sci_base_state_machine_change_state( + &request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + } + + return status; +} + +enum sci_status scic_sds_stp_packet_request_started_completion_delay_complete_handler( + struct sci_base_request *request) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + return this_request->sci_status; +} + +/* --------------------------------------------------------------------------- */ + +const struct scic_sds_io_request_state_handler scic_sds_stp_packet_request_started_substate_handler_table[] = { + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler + .tc_completion_handler = scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler + }, + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_handler + }, + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler + .tc_completion_handler = scic_sds_stp_packet_request_command_phase_await_tc_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_packet_request_command_phase_await_tc_completion_frame_handler + }, + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_packet_request_command_phase_await_d2h_fis_frame_handler + }, + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_stp_packet_request_started_completion_delay_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler + }, +}; + +void scic_sds_stp_packet_request_started_packet_phase_await_tc_completion_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_packet_request_started_substate_handler_table, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + this_request->target_device, this_request + ); +} + +void scic_sds_stp_packet_request_started_packet_phase_await_pio_setup_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_packet_request_started_substate_handler_table, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE + ); +} + +void scic_sds_stp_packet_request_started_command_phase_await_tc_completion_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + u8 sat_packet_protocol = + scic_cb_request_get_sat_protocol(this_request->user_request); + + struct scu_task_context *task_context; + enum sci_status status; + + /* + * Recycle the TC and reconstruct it for sending out data fis containing + * CDB. */ + task_context = scic_sds_controller_get_task_context_buffer( + this_request->owning_controller, this_request->io_tag); + + if (sat_packet_protocol == SAT_PROTOCOL_PACKET_NON_DATA) + scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( + this_request, task_context); + else + scu_stp_packet_request_command_phase_construct_task_context( + this_request, task_context); + + /* send the new TC out. */ + status = this_request->owning_controller->state_handlers->parent.continue_io_handler( + &this_request->owning_controller->parent, + &this_request->target_device->parent, + &this_request->parent + ); + + if (status == SCI_SUCCESS) + SET_STATE_HANDLER( + this_request, + scic_sds_stp_packet_request_started_substate_handler_table, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE + ); +} + +void scic_sds_stp_packet_request_started_command_phase_await_d2h_fis_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_packet_request_started_substate_handler_table, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE + ); +} + +void scic_sds_stp_packet_request_started_completion_delay_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_packet_request_started_substate_handler_table, + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE + ); +} + + +/* --------------------------------------------------------------------------- */ +const struct sci_base_state scic_sds_stp_packet_request_started_substate_table[] = { + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_packet_request_started_packet_phase_await_tc_completion_enter, + }, + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE] = { + .enter_state = scic_sds_stp_packet_request_started_packet_phase_await_pio_setup_enter, + }, + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_packet_request_started_command_phase_await_tc_completion_enter, + }, + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE] = { + .enter_state = scic_sds_stp_packet_request_started_command_phase_await_d2h_fis_enter, + }, + [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE] = { + .enter_state scic_sds_stp_packet_request_started_completion_delay_enter, + } +}; + +#endif /* !defined(DISABLE_ATAPI) */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h new file mode 100644 index 0000000..fc18b3f --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h @@ -0,0 +1,154 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _SCIC_SDS_STP_PACKET_REQUEST_H_ +#define _SCIC_SDS_STP_PACKET_REQUEST_H_ + +#include "intel_sas.h" +#include "sci_types.h" +#include "scic_sds_stp_request.h" + +/** + * This file contains the structures and constants for PACKET protocol requests. + * + * + */ + + +/** + * + * + * This is the enumeration of the SATA PIO DATA IN started substate machine. + */ +enum _SCIC_SDS_STP_PACKET_REQUEST_STARTED_SUBSTATES { + /** + * While in this state the IO request object is waiting for the TC completion + * notification for the H2D Register FIS + */ + SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE, + + /** + * While in this state the IO request object is waiting for either a PIO Setup. + */ + SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE, + + /** + * While in this state the IO request object is waiting for TC completion for + * the Packet DMA DATA fis or Raw Frame. + */ + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE, + + /** + * The non-data IO transit to this state in this state after receiving TC + * completion. While in this state IO request object is waiting for D2H status + * frame as UF. + */ + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE, + + /** + * The IO transit to this state in this state if the previous TC completion status + * is not success and the atapi device is suspended due to target device failed the IO. + * While in this state IO request object is waiting for device coming out of the + * suspension state then complete the IO. + */ + SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE, +}; + + + +#if !defined(DISABLE_ATAPI) +extern const struct sci_base_state scic_sds_stp_packet_request_started_substate_table[]; +extern const struct scic_sds_io_request_state_handler scic_sds_stp_packet_request_started_substate_handler_table[]; +#endif /* !defined(DISABLE_ATAPI) */ + +#if !defined(DISABLE_ATAPI) +enum sci_status scic_sds_stp_packet_request_construct( + struct scic_sds_request *this_request); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_sds_stp_packet_request_construct(request) SCI_FAILURE +#endif /* !defined(DISABLE_ATAPI) */ + +#if !defined(DISABLE_ATAPI) +void scu_stp_packet_request_command_phase_construct_task_context( + struct scic_sds_request *this_request, + struct scu_task_context *task_context); +#else /* !defined(DISABLE_ATAPI) */ +#define scu_stp_packet_request_command_phase_construct_task_context(reqeust, tc) +#endif /* !defined(DISABLE_ATAPI) */ + +#if !defined(DISABLE_ATAPI) +void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( + struct scic_sds_request *this_request, + struct scu_task_context *task_context); +#else /* !defined(DISABLE_ATAPI) */ +#define scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context(reqeust, tc) +#endif /* !defined(DISABLE_ATAPI) */ + +#if !defined(DISABLE_ATAPI) +enum sci_status scic_sds_stp_packet_request_process_status_fis( + struct scic_sds_request *this_request, + struct sata_fis_reg_d2h *status_fis); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_sds_stp_packet_request_process_status_fis(reqeust, fis) SCI_FAILURE +#endif /* !defined(DISABLE_ATAPI) */ + +#if !defined(DISABLE_ATAPI) +void scic_sds_stp_packet_internal_request_sense_build_sgl( + struct scic_sds_request *this_request); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_sds_stp_packet_internal_request_sense_build_sgl(request) +#endif /* !defined(DISABLE_ATAPI) */ + +#endif /* _SCIC_SDS_STP_PACKET_REQUEST_H_ */ + diff --git a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h new file mode 100644 index 0000000..64bf40a --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h @@ -0,0 +1,116 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_SATA_PIO_REQUEST_H_ +#define _SCIC_SDS_SATA_PIO_REQUEST_H_ + +#include "sci_base_state.h" +#include "scic_sds_request.h" +#include "scu_task_context.h" + +/** + * This file contains the structures and constants for SATA PIO requests. + * + * + */ + + +/** + * + * + * This is the enumeration of the SATA PIO DATA IN started substate machine. + */ +enum _SCIC_SDS_STP_REQUEST_STARTED_PIO_SUBSTATES { + /** + * While in this state the IO request object is waiting for the TC completion + * notification for the H2D Register FIS + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE, + + /** + * While in this state the IO request object is waiting for either a PIO Setup + * FIS or a D2H register FIS. The type of frame received is based on the + * result of the prior frame and line conditions. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE, + + /** + * While in this state the IO request object is waiting for a DATA frame from + * the device. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE, + + /** + * While in this state the IO request object is waiting to transmit the next data + * frame to the device. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE, +}; + + +/* --------------------------------------------------------------------------- */ + +extern const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[]; + +extern const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[]; + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_stp_request; + +struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl( + struct scic_sds_stp_request *this_request); + +#endif /* _SCIC_SDS_SATA_PIO_REQUEST_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c new file mode 100644 index 0000000..abe8f33 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -0,0 +1,975 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the ready substate handlers for an STP device. + * + * + */ + +#include "intel_sat.h" +#include "intel_ata.h" +#include "intel_sata.h" +#include "sci_environment.h" +#include "scic_remote_device.h" +#include "scic_user_callback.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_request.h" +#include "scu_event_codes.h" + +/** + * This method will perform the STP request completion processing common to IO + * requests and task requests of all types + * @device: This parameter specifies the device for which the request is being + * completed. + * @request: This parameter specifies the request being completed. + * + * This method returns an indication as to whether the request processing + * completed successfully. + */ +static enum sci_status scic_sds_stp_remote_device_complete_request( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *the_request = (struct scic_sds_request *)request; + enum sci_status status; + + status = scic_sds_io_request_complete(the_request); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + this_device->owning_port, this_device, the_request + ); + + if (status == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(this_device); + if (the_request->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* + * This request causes hardware error, device needs to be Lun Reset. + * So here we force the state machine to IDLE state so the rest IOs + * can reach RNC state handler, these IOs will be completed by RNC with + * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET + ); + } else if (scic_sds_remote_device_get_request_count(this_device) == 0) { + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE + ); + } + } + } + + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(this_device), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", + __func__, + this_device->owning_port, + this_device, + the_request, + status); + + return status; +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY COMMON SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * This is the READY NCQ substate handler to start task management request. In + * this routine, we suspend and resume the RNC. + * @device: The target device a task management request towards to. + * @request: The task request. + * + * enum sci_status Always return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to + * let controller_start_task_handler know that the controller can't post TC for + * task request yet, instead, when RNC gets resumed, a controller_continue_task + * callback will be called. + */ +static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status status; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *this_request = (struct scic_sds_request *)request; + + /* Will the port allow the io request to start? */ + status = this_device->owning_port->state_handlers->start_io_handler( + this_device->owning_port, + this_device, + this_request + ); + + if (SCI_SUCCESS == status) { + status = + scic_sds_remote_node_context_start_task(this_device->rnc, this_request); + + if (SCI_SUCCESS == status) { + status = this_request->state_handlers->parent.start_handler(request); + } + + if (status == SCI_SUCCESS) { + /* + * / @note If the remote device state is not IDLE this will replace + * / the request that probably resulted in the task management + * / request. */ + this_device->working_request = this_request; + + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD + ); + + /* + * The remote node context must cleanup the TCi to NCQ mapping table. + * The only way to do this correctly is to either write to the TLCR + * register or to invalidate and repost the RNC. In either case the + * remote node context state machine will take the correct action when + * the remote node context is suspended and later resumed. */ + scic_sds_remote_node_context_suspend( + this_device->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); + + scic_sds_remote_node_context_resume( + this_device->rnc, + (SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK) + scic_sds_remote_device_continue_request, + this_device); + } + + scic_sds_remote_device_start_request(this_device, this_request, status); + + /* + * We need to let the controller start request handler know that it can't + * post TC yet. We will provide a callback function to post TC when RNC gets + * resumed. */ + return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; + } + + return status; +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * This method will handle the start io operation for a sata device that is in + * the command idle state. - Evalute the type of IO request to be started - + * If its an NCQ request change to NCQ substate - If its any other command + * change to the CMD substate + * @device: + * @request: + * + * If this is a softreset we may want to have a different substate. enum sci_status + */ +static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status status; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *io_request = (struct scic_sds_request *)request; + + + /* Will the port allow the io request to start? */ + status = this_device->owning_port->state_handlers->start_io_handler( + this_device->owning_port, + this_device, + io_request + ); + + if (status == SCI_SUCCESS) { + status = + scic_sds_remote_node_context_start_io(this_device->rnc, io_request); + + if (status == SCI_SUCCESS) { + status = io_request->state_handlers->parent.start_handler(request); + } + + if (status == SCI_SUCCESS) { + if ( + scic_cb_request_get_sat_protocol(io_request->user_request) + == SAT_PROTOCOL_FPDMA + ) { + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ + ); + } else { + this_device->working_request = io_request; + + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD + ); + } + } + + scic_sds_remote_device_start_request(this_device, io_request, status); + } + + return status; +} + + +/** + * + * @[in]: device The device received event. + * @[in]: event_code The event code. + * + * This method will handle the event for a sata device that is in the idle + * state. We pick up suspension events to handle specifically to this state. We + * resume the RNC right away. enum sci_status + */ +static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( + struct scic_sds_remote_device *this_device, + u32 event_code) +{ + enum sci_status status; + + status = scic_sds_remote_device_general_event_handler(this_device, event_code); + + if (status == SCI_SUCCESS) { + if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX + || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { + status = scic_sds_remote_node_context_resume( + this_device->rnc, NULL, NULL); + } + } + + return status; +} + + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS + * ***************************************************************************** */ + +static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + enum sci_status status; + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *io_request = (struct scic_sds_request *)request; + + if ( + scic_cb_request_get_sat_protocol(io_request->user_request) + == SAT_PROTOCOL_FPDMA + ) { + status = this_device->owning_port->state_handlers->start_io_handler( + this_device->owning_port, + this_device, + io_request + ); + + if (status == SCI_SUCCESS) { + status = scic_sds_remote_node_context_start_io(this_device->rnc, io_request); + + if (status == SCI_SUCCESS) { + status = io_request->state_handlers->parent.start_handler(request); + } + + scic_sds_remote_device_start_request(this_device, io_request, status); + } + } else { + status = SCI_FAILURE_INVALID_STATE; + } + + return status; +} + + +/** + * This method will handle events received while the STP device is in the ready + * command substate. + * @this_device: This is the device object that is receiving the event. + * @event_code: The event code to process. + * + * enum sci_status + */ + +static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + + status = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_remote_device_get_controller(this_device)->uf_control), + frame_index, + (void **)&frame_header + ); + + if (status == SCI_SUCCESS) { + if ( + (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS) + && (frame_header->status & ATA_STATUS_REG_ERROR_BIT) + ) { + this_device->not_ready_reason = + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR + ); + } else { + status = SCI_FAILURE; + } + + scic_sds_controller_release_frame( + scic_sds_remote_device_get_controller(this_device), frame_index + ); + } + + return status; +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY CMD SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * This device is already handling a command it can not accept new commands + * until this one is complete. + * @device: + * @request: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( + struct scic_sds_remote_device *this_device, + u32 suspend_type) +{ + enum sci_status status; + + status = scic_sds_remote_node_context_suspend( + this_device->rnc, suspend_type, NULL, NULL + ); + + return status; +} + +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( + struct scic_sds_remote_device *this_device, + u32 frame_index) +{ + enum sci_status status; + + /* + * / The device doe not process any UF received from the hardware while + * / in this state. All unsolicited frames are forwarded to the io request + * / object. */ + status = scic_sds_io_request_frame_handler( + this_device->working_request, + frame_index + ); + + return status; +} + + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS + * ***************************************************************************** */ + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY NCQ ERROR SUBSTATE HANDLERS + * ***************************************************************************** */ + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE HANDLERS + * ***************************************************************************** */ +static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; +} + + + +/** + * This method will perform the STP request (both io or task) completion + * processing for await reset state. + * @device: This parameter specifies the device for which the request is being + * completed. + * @request: This parameter specifies the request being completed. + * + * This method returns an indication as to whether the request processing + * completed successfully. + */ +static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( + struct sci_base_remote_device *device, + struct sci_base_request *request) +{ + struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_request *the_request = (struct scic_sds_request *)request; + enum sci_status status; + + status = scic_sds_io_request_complete(the_request); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + this_device->owning_port, this_device, the_request + ); + + if (status == SCI_SUCCESS) + scic_sds_remote_device_decrement_request_count(this_device); + } + + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(this_device), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", + __func__, + this_device->owning_port, + this_device, + the_request, + status); + + return status; +} + +#if !defined(DISABLE_ATAPI) +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY ATAPI ERROR SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @[in]: device The device received event. + * @[in]: event_code The event code. + * + * This method will handle the event for a ATAPI device that is in the ATAPI + * ERROR state. We pick up suspension events to handle specifically to this + * state. We resume the RNC right away. We then complete the outstanding IO to + * this device. enum sci_status + */ +enum sci_status scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler( + struct scic_sds_remote_device *this_device, + u32 event_code) +{ + enum sci_status status; + + status = scic_sds_remote_device_general_event_handler(this_device, event_code); + + if (status == SCI_SUCCESS) { + if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX + || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { + status = scic_sds_remote_node_context_resume( + this_device->rnc, + this_device->working_request->state_handlers->parent.complete_handler, + (void *)this_device->working_request + ); + } + } + + return status; +} +#endif /* !defined(DISABLE_ATAPI) */ + +/* --------------------------------------------------------------------------- */ + +struct scic_sds_remote_device_state_handler +scic_sds_stp_remote_device_ready_substate_handler_table[ + SCIC_SDS_STP_REMOTE_DEVICE_READY_MAX_SUBSTATES] = +{ + /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_ready_state_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, + scic_sds_remote_device_default_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_stp_remote_device_ready_substate_start_request_handler, + scic_sds_remote_device_default_complete_request_handler + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_stp_remote_device_ready_idle_substate_event_handler, + scic_sds_remote_device_default_frame_handler + }, + /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_ready_state_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, + scic_sds_stp_remote_device_complete_request, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_stp_remote_device_ready_substate_start_request_handler, + scic_sds_stp_remote_device_complete_request, + }, + scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_stp_remote_device_ready_cmd_substate_frame_handler + }, + /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_ready_state_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, + scic_sds_stp_remote_device_complete_request, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_stp_remote_device_ready_substate_start_request_handler, + scic_sds_stp_remote_device_complete_request + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_stp_remote_device_ready_ncq_substate_frame_handler + }, + /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_ready_state_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_stp_remote_device_complete_request, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_stp_remote_device_ready_substate_start_request_handler, + scic_sds_stp_remote_device_complete_request + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_remote_device_general_frame_handler + }, +#if !defined(DISABLE_ATAPI) + /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_ready_state_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_remote_device_default_start_request_handler, + scic_sds_stp_remote_device_complete_request, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_stp_remote_device_ready_substate_start_request_handler, + scic_sds_stp_remote_device_complete_request + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler, + scic_sds_remote_device_general_frame_handler + }, +#endif + /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET */ + { + { + scic_sds_remote_device_default_start_handler, + scic_sds_remote_device_ready_state_stop_handler, + scic_sds_remote_device_default_fail_handler, + scic_sds_remote_device_default_destruct_handler, + scic_sds_remote_device_ready_state_reset_handler, + scic_sds_remote_device_default_reset_complete_handler, + scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, + scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, + scic_sds_remote_device_default_continue_request_handler, + scic_sds_stp_remote_device_ready_substate_start_request_handler, + scic_sds_stp_remote_device_complete_request + }, + scic_sds_remote_device_default_suspend_handler, + scic_sds_remote_device_default_resume_handler, + scic_sds_remote_device_general_event_handler, + scic_sds_remote_device_general_frame_handler + } +}; + +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "sci_base_state.h" +#include "scic_remote_device.h" +#include "scic_user_callback.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "scic_sds_remote_device.h" +#include "sci_util.h" +#include "sci_environment.h" + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY SUBSTATE PRIVATE METHODS + * ***************************************************************************** */ + +static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( + void *user_cookie) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)user_cookie; + + /* + * For NCQ operation we do not issue a + * scic_cb_remote_device_not_ready(). As a result, avoid sending + * the ready notification. */ + if (this_device->ready_substate_machine.previous_state_id + != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) { + scic_cb_remote_device_ready( + scic_sds_remote_device_get_controller(this_device), this_device + ); + } +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY IDLE SUBSTATE + * ***************************************************************************** */ + +/** + * + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +static void scic_sds_stp_remote_device_ready_idle_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)device; + + SET_STATE_HANDLER( + this_device, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE + ); + + this_device->working_request = NULL; + + if (scic_sds_remote_node_context_is_ready(this_device->rnc)) { + /* + * Since the RNC is ready, it's alright to finish completion + * processing (e.g. signal the remote device is ready). */ + scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( + this_device + ); + } else { + scic_sds_remote_node_context_resume( + this_device->rnc, + scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, + this_device + ); + } +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY CMD SUBSTATE + * ***************************************************************************** */ + +/** + * + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +static void scic_sds_stp_remote_device_ready_cmd_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)device; + + BUG_ON(this_device->working_request == NULL); + + SET_STATE_HANDLER( + this_device, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD + ); + + scic_cb_remote_device_not_ready( + scic_sds_remote_device_get_controller(this_device), + this_device, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED + ); +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY NCQ SUBSTATE + * ***************************************************************************** */ + +/** + * + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +static void scic_sds_stp_remote_device_ready_ncq_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)device; + + SET_STATE_HANDLER( + this_device, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ + ); +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY NCQ ERROR SUBSTATE + * ***************************************************************************** */ + +/** + * + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)device; + + SET_STATE_HANDLER( + this_device, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR + ); + + if (this_device->not_ready_reason == + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) { + scic_cb_remote_device_not_ready( + scic_sds_remote_device_get_controller(this_device), + this_device, + this_device->not_ready_reason + ); + } +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE + * ***************************************************************************** */ + +/** + * The enter routine to READY AWAIT RESET substate. + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +static void scic_sds_stp_remote_device_ready_await_reset_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)device; + + SET_STATE_HANDLER( + this_device, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET + ); +} + +#if !defined(DISABLE_ATAPI) +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY ATAPI ERROR SUBSTATE + * ***************************************************************************** */ + +/** + * The enter routine to READY ATAPI ERROR substate. + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +void scic_sds_stp_remote_device_ready_atapi_error_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *this_device; + + this_device = (struct scic_sds_remote_device *)device; + + SET_STATE_HANDLER( + this_device, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR + ); +} +#endif /* !defined(DISABLE_ATAPI) */ + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[] = { + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { + .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { + .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, + }, +#if !defined(DISABLE_ATAPI) + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { + .enter_state = scic_sds_stp_remote_device_ready_atapi_error_substate_enter, + }, +#endif + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { + .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter, + }, +}; diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c new file mode 100644 index 0000000..c14f6f1 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -0,0 +1,2004 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +#include "intel_ata.h" +#include "intel_sata.h" +#include "intel_sat.h" +#include "sci_base_state.h" +#include "sci_base_state_machine.h" +#include "scic_io_request.h" +#include "scic_remote_device.h" +#include "scic_sds_controller.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_request.h" +#include "scic_sds_stp_pio_request.h" +#include "scic_sds_stp_request.h" +#include "scic_sds_unsolicited_frame_control.h" +#include "scic_user_callback.h" +#include "sci_environment.h" +#include "sci_types.h" +#include "sci_util.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "scu_task_context.h" + +/** + * scic_sds_stp_request_get_h2d_reg_buffer() - + * + * This macro returns the address of the stp h2d reg fis buffer in the io + * request memory + */ +#define scic_sds_stp_request_get_h2d_reg_buffer(memory) \ + ((struct sata_fis_reg_h2d *)(\ + ((char *)(memory)) + sizeof(struct scic_sds_stp_request) \ + )) + +/** + * scic_sds_stp_request_get_response_buffer() - + * + * This macro returns the address of the ssp response iu buffer in the io + * request memory + */ +#define scic_sds_stp_request_get_response_buffer(memory) \ + ((struct sata_fis_reg_d2h *)(\ + ((char *)(scic_sds_stp_request_get_h2d_reg_buffer(memory))) \ + + sizeof(struct sata_fis_reg_h2d) \ + )) + +/** + * scic_sds_stp_request_get_task_context_buffer() - + * + * This macro returns the address of the task context buffer in the io request + * memory + */ +#define scic_sds_stp_request_get_task_context_buffer(memory) \ + ((struct scu_task_context *)(\ + ((char *)(scic_sds_stp_request_get_response_buffer(memory))) \ + + sizeof(struct sci_ssp_response_iu) \ + )) + +/** + * scic_sds_stp_request_get_sgl_element_buffer() - + * + * This macro returns the address of the sgl elment pairs in the io request + * memory buffer + */ +#define scic_sds_stp_request_get_sgl_element_buffer(memory) \ + ((struct scu_sgl_element_pair *)(\ + ((char *)(scic_sds_stp_request_get_task_context_buffer(memory))) \ + + sizeof(struct scu_task_context) \ + )) + +/** + * + * + * This method return the memory space required for STP PIO requests. u32 + */ +u32 scic_sds_stp_request_get_object_size(void) +{ + return sizeof(struct scic_sds_stp_request) + + sizeof(struct sata_fis_reg_h2d) + + sizeof(struct sata_fis_reg_d2h) + + sizeof(struct scu_task_context) + + sizeof(struct scu_sgl_element_pair) * SCU_MAX_SGL_ELEMENT_PAIRS; +} + +/** + * + * + * + */ +void scic_sds_stp_request_assign_buffers( + struct scic_sds_request *request) +{ + struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + + this_request->parent.command_buffer = + scic_sds_stp_request_get_h2d_reg_buffer(this_request); + this_request->parent.response_buffer = + scic_sds_stp_request_get_response_buffer(this_request); + this_request->parent.sgl_element_pair_buffer = + scic_sds_stp_request_get_sgl_element_buffer(this_request); + this_request->parent.sgl_element_pair_buffer = + scic_sds_request_align_sgl_element_buffer(this_request->parent.sgl_element_pair_buffer); + + if (this_request->parent.was_tag_assigned_by_user == false) { + this_request->parent.task_context_buffer = + scic_sds_stp_request_get_task_context_buffer(this_request); + this_request->parent.task_context_buffer = + scic_sds_request_align_task_context_buffer(this_request->parent.task_context_buffer); + } +} + +/** + * This method is will fill in the SCU Task Context for any type of SATA + * request. This is called from the various SATA constructors. + * @this_request: The general IO request object which is to be used in + * constructing the SCU task context. + * @task_context: The buffer pointer for the SCU task context which is being + * constructed. + * + * The general io request construction is complete. The buffer assignment for + * the command buffer is complete. none Revisit task context construction to + * determine what is common for SSP/SMP/STP task context structures. + */ +static void scu_sata_reqeust_construct_task_context( + struct scic_sds_request *this_request, + struct scu_task_context *task_context) +{ + dma_addr_t physical_address; + struct scic_sds_controller *owning_controller; + struct scic_sds_remote_device *target_device; + struct scic_sds_port *target_port; + + owning_controller = scic_sds_request_get_controller(this_request); + target_device = scic_sds_request_get_device(this_request); + target_port = scic_sds_request_get_port(this_request); + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->initiator_request = 1; + task_context->connection_rate = + scic_remote_device_get_connection_rate(target_device); + task_context->protocol_engine_index = + scic_sds_controller_get_protocol_engine_group(owning_controller); + task_context->logical_port_index = + scic_sds_port_get_index(target_port); + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = + scic_sds_remote_device_get_index(this_request->target_device); + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + task_context->task_phase = 0x01; + + task_context->ssp_command_iu_length = + (sizeof(struct sata_fis_reg_h2d) - sizeof(u32)) / sizeof(u32); + + /* Set the first word of the H2D REG FIS */ + task_context->type.words[0] = *(u32 *)this_request->command_buffer; + + if (this_request->was_tag_assigned_by_user) { + /* Build the task context now since we have already read the data */ + this_request->post_context = ( + SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC + | ( + scic_sds_controller_get_protocol_engine_group(owning_controller) + << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT + ) + | ( + scic_sds_port_get_index(target_port) + << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT + ) + | scic_sds_io_tag_get_index(this_request->io_tag) + ); + } else { + /* Build the task context now since we have already read the data */ + this_request->post_context = ( + SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC + | ( + scic_sds_controller_get_protocol_engine_group(owning_controller) + << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT + ) + | ( + scic_sds_port_get_index(target_port) + << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT + ) + /* This is not assigned because we have to wait until we get a TCi */ + ); + } + + /* + * Copy the physical address for the command buffer to the SCU Task Context + * We must offset the command buffer by 4 bytes because the first 4 bytes are + * transfered in the body of the TC */ + scic_cb_io_request_get_physical_address( + scic_sds_request_get_controller(this_request), + this_request, + ((char *)this_request->command_buffer) + sizeof(u32), + &physical_address + ); + + task_context->command_iu_upper = + upper_32_bits(physical_address); + task_context->command_iu_lower = + lower_32_bits(physical_address); + + /* SATA Requests do not have a response buffer */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + +/** + * + * @this_request: + * + * This method will perform any general sata request construction. What part of + * SATA IO request construction is general? none + */ +void scic_sds_stp_non_ncq_request_construct( + struct scic_sds_request *this_request) +{ + this_request->has_started_substate_machine = true; +} + +/** + * + * @this_request: This parameter specifies the request to be constructed as an + * optimized request. + * @optimized_task_type: This parameter specifies whether the request is to be + * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A + * value of 1 indicates NCQ. + * + * This method will perform request construction common to all types of STP + * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method + * returns an indication as to whether the construction was successful. + */ +static void scic_sds_stp_optimized_request_construct( + struct scic_sds_request *this_request, + u8 optimized_task_type, + u32 transfer_length, + SCI_IO_REQUEST_DATA_DIRECTION data_direction) +{ + struct scu_task_context *task_context = this_request->task_context_buffer; + + /* Build the STP task context structure */ + scu_sata_reqeust_construct_task_context(this_request, task_context); + + /* Copy over the SGL elements */ + scic_sds_request_build_sgl(this_request); + + /* Copy over the number of bytes to be transfered */ + task_context->transfer_length_bytes = transfer_length; + + if (data_direction == SCI_IO_REQUEST_DATA_OUT) { + /* + * The difference between the DMA IN and DMA OUT request task type + * values are consistent with the difference between FPDMA READ + * and FPDMA WRITE values. Add the supplied task type parameter + * to this difference to set the task type properly for this + * DATA OUT (WRITE) case. */ + task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT + - SCU_TASK_TYPE_DMA_IN); + } else { + /* + * For the DATA IN (READ) case, simply save the supplied + * optimized task type. */ + task_context->task_type = optimized_task_type; + } +} + +/** + * + * @this_request: This parameter specifies the request to be constructed. + * + * This method will construct the STP UDMA request and its associated TC data. + * This method returns an indication as to whether the construction was + * successful. SCI_SUCCESS Currently this method always returns this value. + */ +enum sci_status scic_sds_stp_udma_request_construct( + struct scic_sds_request *this_request, + u32 transfer_length, + SCI_IO_REQUEST_DATA_DIRECTION data_direction) +{ + scic_sds_stp_non_ncq_request_construct(this_request); + + scic_sds_stp_optimized_request_construct( + this_request, + SCU_TASK_TYPE_DMA_IN, + transfer_length, + data_direction + ); + + sci_base_state_machine_construct( + &this_request->started_substate_machine, + &this_request->parent.parent, + scic_sds_stp_request_started_udma_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE + ); + + return SCI_SUCCESS; +} + +/** + * + * @this_request: This parameter specifies the request to be constructed. + * + * This method will construct the STP UDMA request and its associated TC data. + * This method returns an indication as to whether the construction was + * successful. SCI_SUCCESS Currently this method always returns this value. + */ +enum sci_status scic_sds_stp_ncq_request_construct( + struct scic_sds_request *this_request, + u32 transfer_length, + SCI_IO_REQUEST_DATA_DIRECTION data_direction) +{ + scic_sds_stp_optimized_request_construct( + this_request, + SCU_TASK_TYPE_FPDMAQ_READ, + transfer_length, + data_direction + ); + return SCI_SUCCESS; +} + +/** + * + * @this_request: This parameter specifies the STP request object for which to + * construct a RAW command frame task context. + * @task_context: This parameter specifies the SCU specific task context buffer + * to construct. + * + * This method performs the operations common to all SATA/STP requests + * utilizing the raw frame method. none + */ +void scu_stp_raw_request_construct_task_context( + struct scic_sds_stp_request *this_request, + struct scu_task_context *task_context) +{ + scu_sata_reqeust_construct_task_context(&this_request->parent, task_context); + + task_context->control_frame = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; + task_context->type.stp.fis_type = SATA_FIS_TYPE_REGH2D; + task_context->transfer_length_bytes = sizeof(struct sata_fis_reg_h2d) - sizeof(u32); +} + +/** + * + * @this_request: This parameter specifies the core request object to + * construction into an STP/SATA non-data request. + * + * This method will construct the STP Non-data request and its associated TC + * data. A non-data request essentially behaves like a 0 length read request + * in the SCU. This method currently always returns SCI_SUCCESS + */ +enum sci_status scic_sds_stp_non_data_request_construct( + struct scic_sds_request *this_request) +{ + scic_sds_stp_non_ncq_request_construct(this_request); + + /* Build the STP task context structure */ + scu_stp_raw_request_construct_task_context( + (struct scic_sds_stp_request *)this_request, + this_request->task_context_buffer + ); + + sci_base_state_machine_construct( + &this_request->started_substate_machine, + &this_request->parent.parent, + scic_sds_stp_request_started_non_data_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE + ); + + return SCI_SUCCESS; +} + + +enum sci_status scic_sds_stp_soft_reset_request_construct( + struct scic_sds_request *this_request) +{ + scic_sds_stp_non_ncq_request_construct(this_request); + + /* Build the STP task context structure */ + scu_stp_raw_request_construct_task_context( + (struct scic_sds_stp_request *)this_request, + this_request->task_context_buffer + ); + + sci_base_state_machine_construct( + &this_request->started_substate_machine, + &this_request->parent.parent, + scic_sds_stp_request_started_soft_reset_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE + ); + + return SCI_SUCCESS; +} + + +void scic_stp_io_request_set_ncq_tag( + struct scic_sds_request *req, + u16 ncq_tag) +{ + /** + * @note This could be made to return an error to the user if the user + * attempts to set the NCQ tag in the wrong state. + */ + req->task_context_buffer->type.stp.ncq_tag = ncq_tag; +} + + +void *scic_stp_io_request_get_h2d_reg_address( + struct scic_sds_request *req) +{ + return req->command_buffer; +} + + +void *scic_stp_io_request_get_d2h_reg_address( + struct scic_sds_request *req) +{ + return &((struct scic_sds_stp_request *)req)->d2h_reg_fis; +} + +/** + * + * @this_request: + * + * Get the next SGL element from the request. - Check on which SGL element pair + * we are working - if working on SLG pair element A - advance to element B - + * else - check to see if there are more SGL element pairs for this IO request + * - if there are more SGL element pairs - advance to the next pair and return + * element A struct scu_sgl_element* + */ +struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl( + struct scic_sds_stp_request *this_request + ) { + struct scu_sgl_element *current_sgl; + + if (this_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + if ( + (this_request->type.pio.request_current.sgl_pair->B.address_lower == 0) + && (this_request->type.pio.request_current.sgl_pair->B.address_upper == 0) + ) { + current_sgl = NULL; + } else { + this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_B; + current_sgl = &(this_request->type.pio.request_current.sgl_pair->B); + } + } else { + if ( + (this_request->type.pio.request_current.sgl_pair->next_pair_lower == 0) + && (this_request->type.pio.request_current.sgl_pair->next_pair_upper == 0) + ) { + current_sgl = NULL; + } else { + dma_addr_t physical_address; + + sci_cb_make_physical_address( + physical_address, + this_request->type.pio.request_current.sgl_pair->next_pair_upper, + this_request->type.pio.request_current.sgl_pair->next_pair_lower + ); + + this_request->type.pio.request_current.sgl_pair = + (struct scu_sgl_element_pair *)scic_cb_get_virtual_address( + this_request->parent.owning_controller, + physical_address + ); + + this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; + + current_sgl = &(this_request->type.pio.request_current.sgl_pair->A); + } + } + + return current_sgl; +} + +/** + * + * @scic_io_request: The core request object which is cast to a SATA PIO + * request object. + * + * This method will construct the SATA PIO request. This method returns an + * indication as to whether the construction was successful. SCI_SUCCESS + * Currently this method always returns this value. + */ +enum sci_status scic_sds_stp_pio_request_construct( + struct scic_sds_request *scic_io_request, + u8 sat_protocol, + bool copy_rx_frame) +{ + struct scic_sds_stp_request *this_request; + + this_request = (struct scic_sds_stp_request *)scic_io_request; + + scic_sds_stp_non_ncq_request_construct(&this_request->parent); + + scu_stp_raw_request_construct_task_context( + this_request, this_request->parent.task_context_buffer + ); + + this_request->type.pio.current_transfer_bytes = 0; + this_request->type.pio.ending_error = 0; + this_request->type.pio.ending_status = 0; + + this_request->type.pio.request_current.sgl_offset = 0; + this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; + this_request->type.pio.sat_protocol = sat_protocol; + + if (copy_rx_frame) { + scic_sds_request_build_sgl(&this_request->parent); + /* + * Since the IO request copy of the TC contains the same data as + * the actual TC this pointer is vaild for either. */ + this_request->type.pio.request_current.sgl_pair = + &this_request->parent.task_context_buffer->sgl_pair_ab; + } else { + /* The user does not want the data copied to the SGL buffer location */ + this_request->type.pio.request_current.sgl_pair = NULL; + } + + sci_base_state_machine_construct( + &this_request->parent.started_substate_machine, + &this_request->parent.parent.parent, + scic_sds_stp_request_started_pio_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE + ); + + return SCI_SUCCESS; +} + +/** + * + * @this_request: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. + */ +static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return SCI_SUCCESS; +} + +/** + * + * @request: This parameter specifies the request for which a frame has been + * received. + * @frame_index: This parameter specifies the index of the frame that has been + * received. + * + * This method processes frames received from the target while waiting for a + * device to host register FIS. If a non-register FIS is received during this + * time, it is treated as a protocol violation from an IO perspective. Indicate + * if the received frame was processed successfully. + */ +static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + + status = scic_sds_unsolicited_frame_control_get_header( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_header + ); + + if (status == SCI_SUCCESS) { + switch (frame_header->fis_type) { + case SATA_FIS_TYPE_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_buffer + ); + + scic_sds_controller_copy_sata_response( + &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer + ); + + /* The command has completed with error */ + scic_sds_request_set_status( + &this_request->parent, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + break; + + default: + dev_warn(scic_to_dev(request->owning_controller), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", + __func__, this_request, frame_index); + + scic_sds_request_set_status( + &this_request->parent, + SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION + ); + break; + } + + sci_base_state_machine_change_state( + &this_request->parent.parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame( + this_request->parent.owning_controller, frame_index + ); + } else + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, this_request, frame_index, status); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, + } +}; + +static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_non_data_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + this_request->target_device, this_request + ); +} + +static void scic_sds_stp_request_started_non_data_await_d2h_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_non_data_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_non_data_await_d2h_enter, + }, +}; + +#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ + +/** + * + * @this_request: + * @length: + * + * This function will transmit DATA_FIS from (current sgl + offset) for input + * parameter length. current sgl and offset is alreay stored in the IO request + * enum sci_status + */ + +static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( + struct scic_sds_request *this_request, + u32 length) +{ + struct scic_sds_stp_request *this_sds_stp_request = (struct scic_sds_stp_request *)this_request; + sci_base_controller_request_handler_t continue_io; + struct scu_sgl_element *current_sgl; + struct scic_sds_controller *scic; + u32 state; + + /* + * Recycle the TC and reconstruct it for sending out DATA FIS containing + * for the data from current_sgl+offset for the input length */ + struct scu_task_context *task_context = scic_sds_controller_get_task_context_buffer( + this_request->owning_controller, + this_request->io_tag + ); + + if (this_sds_stp_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) + current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->A); + else + current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->B); + + /* update the TC */ + task_context->command_iu_upper = current_sgl->address_upper; + task_context->command_iu_lower = current_sgl->address_lower; + task_context->transfer_length_bytes = length; + task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; + + /* send the new TC out. */ + scic = this_request->owning_controller; + state = scic->parent.state_machine.current_state_id; + continue_io = scic_sds_controller_state_handler_table[state].base.continue_io; + return continue_io(&scic->parent, &this_request->target_device->parent, + &this_request->parent); +} + +/** + * + * @this_request: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data( + struct scic_sds_request *this_sds_request) +{ + + struct scu_sgl_element *current_sgl; + u32 sgl_offset; + u32 remaining_bytes_in_current_sgl = 0; + enum sci_status status = SCI_SUCCESS; + + struct scic_sds_stp_request *this_sds_stp_request = (struct scic_sds_stp_request *)this_sds_request; + + sgl_offset = this_sds_stp_request->type.pio.request_current.sgl_offset; + + if (this_sds_stp_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->A); + remaining_bytes_in_current_sgl = this_sds_stp_request->type.pio.request_current.sgl_pair->A.length - sgl_offset; + } else { + current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->B); + remaining_bytes_in_current_sgl = this_sds_stp_request->type.pio.request_current.sgl_pair->B.length - sgl_offset; + } + + + if (this_sds_stp_request->type.pio.pio_transfer_bytes > 0) { + if (this_sds_stp_request->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { + /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ + status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(this_sds_request, remaining_bytes_in_current_sgl); + if (status == SCI_SUCCESS) { + this_sds_stp_request->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; + + /* update the current sgl, sgl_offset and save for future */ + current_sgl = scic_sds_stp_request_pio_get_next_sgl(this_sds_stp_request); + sgl_offset = 0; + } + } else if (this_sds_stp_request->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { + /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */ + scic_sds_stp_request_pio_data_out_trasmit_data_frame(this_sds_request, this_sds_stp_request->type.pio.pio_transfer_bytes); + + if (status == SCI_SUCCESS) { + /* Sgl offset will be adjusted and saved for future */ + sgl_offset += this_sds_stp_request->type.pio.pio_transfer_bytes; + current_sgl->address_lower += this_sds_stp_request->type.pio.pio_transfer_bytes; + this_sds_stp_request->type.pio.pio_transfer_bytes = 0; + } + } + } + + if (status == SCI_SUCCESS) { + this_sds_stp_request->type.pio.request_current.sgl_offset = sgl_offset; + } + + return status; +} + +/** + * + * @this_request: The request that is used for the SGL processing. + * @data_buffer: The buffer of data to be copied. + * @length: The length of the data transfer. + * + * Copy the data from the buffer for the length specified to the IO reqeust SGL + * specified data region. enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_in_copy_data_buffer( + struct scic_sds_stp_request *this_request, + u8 *data_buffer, + u32 length) +{ + enum sci_status status; + struct scu_sgl_element *current_sgl; + u32 sgl_offset; + u32 data_offset; + u8 *source_address; + u8 *destination_address; + u32 copy_length; + + /* Initial setup to get the current working SGL and the offset within the buffer */ + current_sgl = + (this_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) ? + &(this_request->type.pio.request_current.sgl_pair->A) : + &(this_request->type.pio.request_current.sgl_pair->B); + + sgl_offset = this_request->type.pio.request_current.sgl_offset; + + source_address = data_buffer; + data_offset = 0; + + status = SCI_SUCCESS; + + /* While we are still doing Ok and there is more data to transfer */ + while ( + (length > 0) + && (status == SCI_SUCCESS) + ) { + if (current_sgl->length == sgl_offset) { + /* This SGL has been exauhasted so we need to get the next SGL */ + current_sgl = scic_sds_stp_request_pio_get_next_sgl(this_request); + + if (current_sgl == NULL) + status = SCI_FAILURE; + else + sgl_offset = 0; + } else { + dma_addr_t physical_address; + + sci_cb_make_physical_address( + physical_address, + current_sgl->address_upper, + current_sgl->address_lower + ); + + destination_address = (u8 *)scic_cb_get_virtual_address( + this_request->parent.owning_controller, + physical_address + ); + + source_address += data_offset; + destination_address += sgl_offset; + + copy_length = min(length, current_sgl->length - sgl_offset); + + memcpy(destination_address, source_address, copy_length); + + length -= copy_length; + sgl_offset += copy_length; + data_offset += copy_length; + } + } + + this_request->type.pio.request_current.sgl_offset = sgl_offset; + + return status; +} + +/** + * + * @this_request: The PIO DATA IN request that is to receive the data. + * @data_buffer: The buffer to copy from. + * + * Copy the data buffer to the io request data region. enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( + struct scic_sds_stp_request *this_request, + u8 *data_buffer) +{ + enum sci_status status; + + /* + * If there is less than 1K remaining in the transfer request + * copy just the data for the transfer */ + if (this_request->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { + status = scic_sds_stp_request_pio_data_in_copy_data_buffer( + this_request, data_buffer, this_request->type.pio.pio_transfer_bytes); + + if (status == SCI_SUCCESS) + this_request->type.pio.pio_transfer_bytes = 0; + } else { + /* We are transfering the whole frame so copy */ + status = scic_sds_stp_request_pio_data_in_copy_data_buffer( + this_request, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); + + if (status == SCI_SUCCESS) + this_request->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; + } + + return status; +} + +/** + * + * @this_request: + * @completion_code: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return status; +} + +/** + * + * @this_request: + * @frame_index: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *this_request; + + this_request = (struct scic_sds_stp_request *)request; + + status = scic_sds_unsolicited_frame_control_get_header( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_header + ); + + if (status == SCI_SUCCESS) { + switch (frame_header->fis_type) { + case SATA_FIS_TYPE_PIO_SETUP: + /* Get from the frame buffer the PIO Setup Data */ + scic_sds_unsolicited_frame_control_get_buffer( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_buffer + ); + + /* + * Get the data from the PIO Setup + * The SCU Hardware returns first word in the frame_header and the rest + * of the data is in the frame buffer so we need to back up one dword */ + this_request->type.pio.pio_transfer_bytes = + (u16)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->transfter_count; + this_request->type.pio.ending_status = + (u8)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->ending_status; + + scic_sds_controller_copy_sata_response( + &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer + ); + + this_request->d2h_reg_fis.status = + this_request->type.pio.ending_status; + + /* The next state is dependent on whether the request was PIO Data-in or Data out */ + if (this_request->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_IN) { + sci_base_state_machine_change_state( + &this_request->parent.started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE + ); + } else if (this_request->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_OUT) { + /* Transmit data */ + status = scic_sds_stp_request_pio_data_out_transmit_data(request); + if (status == SCI_SUCCESS) { + sci_base_state_machine_change_state( + &this_request->parent.started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE + ); + } + } + break; + + case SATA_FIS_TYPE_SETDEVBITS: + sci_base_state_machine_change_state( + &this_request->parent.started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + break; + + case SATA_FIS_TYPE_REGD2H: + if ((frame_header->status & ATA_STATUS_REG_BSY_BIT) == 0) { + scic_sds_unsolicited_frame_control_get_buffer( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_buffer + ); + + scic_sds_controller_copy_sata_response( + &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer); + + scic_sds_request_set_status( + &this_request->parent, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + + sci_base_state_machine_change_state( + &this_request->parent.parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + } else { + /* + * Now why is the drive sending a D2H Register FIS when it is still busy? + * Do nothing since we are still in the right state. */ + dev_dbg(scic_to_dev(request->owning_controller), + "%s: SCIC PIO Request 0x%p received " + "D2H Register FIS with BSY status " + "0x%x\n", + __func__, + this_request, + frame_header->status); + } + break; + + default: + break; + } + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame( + this_request->parent.owning_controller, + frame_index + ); + } else + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, this_request, frame_index, status); + + return status; +} + +/** + * + * @this_request: + * @frame_index: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + struct sata_fis_data *frame_buffer; + struct scic_sds_stp_request *this_request; + + this_request = (struct scic_sds_stp_request *)request; + + status = scic_sds_unsolicited_frame_control_get_header( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_header + ); + + if (status == SCI_SUCCESS) { + if (frame_header->fis_type == SATA_FIS_TYPE_DATA) { + if (this_request->type.pio.request_current.sgl_pair == NULL) { + this_request->parent.saved_rx_frame_index = frame_index; + this_request->type.pio.pio_transfer_bytes = 0; + } else { + status = scic_sds_unsolicited_frame_control_get_buffer( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_buffer + ); + + status = scic_sds_stp_request_pio_data_in_copy_data(this_request, (u8 *)frame_buffer); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame( + this_request->parent.owning_controller, + frame_index + ); + } + + /* + * Check for the end of the transfer, are there more bytes remaining + * for this data transfer */ + if ( + (status == SCI_SUCCESS) + && (this_request->type.pio.pio_transfer_bytes == 0) + ) { + if ((this_request->type.pio.ending_status & ATA_STATUS_REG_BSY_BIT) == 0) { + scic_sds_request_set_status( + &this_request->parent, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + + sci_base_state_machine_change_state( + &this_request->parent.parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + } else { + sci_base_state_machine_change_state( + &this_request->parent.started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + } + } + } else { + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC PIO Request 0x%p received frame %d " + "with fis type 0x%02x when expecting a data " + "fis.\n", + __func__, + this_request, + frame_index, + frame_header->fis_type); + + scic_sds_request_set_status( + &this_request->parent, + SCU_TASK_DONE_GOOD, + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT + ); + + sci_base_state_machine_change_state( + &this_request->parent.parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame( + this_request->parent.owning_controller, + frame_index + ); + } + } else + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, this_request, frame_index, status); + + return status; +} + + +/** + * + * @this_request: + * @completion_code: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( + + struct scic_sds_request *this_request, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + bool all_frames_transferred = false; + + struct scic_sds_stp_request *this_scic_sds_stp_request = (struct scic_sds_stp_request *)this_request; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* Transmit data */ + if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes != 0) { + status = scic_sds_stp_request_pio_data_out_transmit_data(this_request); + if (status == SCI_SUCCESS) { + if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes == 0) + all_frames_transferred = true; + } + } else if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes == 0) { + /* + * this will happen if the all data is written at the + * first time after the pio setup fis is received + */ + all_frames_transferred = true; + } + + /* all data transferred. */ + if (all_frames_transferred) { + /* + * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE + * and wait for PIO_SETUP fis / or D2H REg fis. */ + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + } + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return status; +} + +/** + * + * @request: This is the request which is receiving the event. + * @event_code: This is the event code that the request on which the request is + * expected to take action. + * + * This method will handle any link layer events while waiting for the data + * frame. enum sci_status SCI_SUCCESS SCI_FAILURE + */ +static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler( + struct scic_sds_request *request, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_specifier(event_code)) { + case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: + /* + * We are waiting for data and the SCU has R_ERR the data frame. + * Go back to waiting for the D2H Register FIS */ + sci_base_state_machine_change_state( + &request->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + + status = SCI_SUCCESS; + break; + + default: + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC PIO Request 0x%p received unexpected " + "event 0x%08x\n", + __func__, request, event_code); + + /* / @todo Should we fail the PIO request when we get an unexpected event? */ + status = SCI_FAILURE; + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, + .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + } +}; + +static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_pio_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + this_request->target_device, this_request); +} + +static void scic_sds_stp_request_started_pio_await_frame_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_pio_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); +} + +static void scic_sds_stp_request_started_pio_data_in_await_data_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_pio_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE + ); +} + +static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_pio_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_await_frame_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_data_in_await_data_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_data_out_transmit_data_enter, + } +}; + +static void scic_sds_stp_request_udma_complete_request( + struct scic_sds_request *this_request, + u32 scu_status, + enum sci_status sci_status) +{ + scic_sds_request_set_status( + this_request, scu_status, sci_status + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); +} + +/** + * + * @this_request: + * @frame_index: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_udma_general_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + u32 *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header( + &this_request->owning_controller->uf_control, + frame_index, + (void **)&frame_header + ); + + if ( + (status == SCI_SUCCESS) + && (frame_header->fis_type == SATA_FIS_TYPE_REGD2H) + ) { + scic_sds_unsolicited_frame_control_get_buffer( + &this_request->owning_controller->uf_control, + frame_index, + (void **)&frame_buffer + ); + + scic_sds_controller_copy_sata_response( + &((struct scic_sds_stp_request *)this_request)->d2h_reg_fis, + (u32 *)frame_header, + frame_buffer + ); + } + + scic_sds_controller_release_frame( + this_request->owning_controller, frame_index); + + return status; +} + +/** + * This method process TC completions while in the state where we are waiting + * for TC completions. + * @this_request: + * @completion_code: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( + struct scic_sds_request *request, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_stp_request_udma_complete_request( + &this_request->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + /* + * We must check ther response buffer to see if the D2H Register FIS was + * received before we got the TC completion. */ + if (this_request->d2h_reg_fis.fis_type == SATA_FIS_TYPE_REGD2H) { + scic_sds_remote_device_suspend( + this_request->parent.target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)) + ); + + scic_sds_stp_request_udma_complete_request( + &this_request->parent, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + } else { + /* + * If we have an error completion status for the TC then we can expect a + * D2H register FIS from the device so we must change state to wait for it */ + sci_base_state_machine_change_state( + &this_request->parent.started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE + ); + } + break; + + /* + * / @todo Check to see if any of these completion status need to wait for + * / the device to host register fis. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): + scic_sds_remote_device_suspend( + this_request->parent.target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)) + ); + /* Fall through to the default case */ + default: + /* All other completion status cause the IO to be complete. */ + scic_sds_stp_request_udma_complete_request( + &this_request->parent, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + break; + } + + return status; +} + +static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler( + struct scic_sds_request *this_request, + u32 frame_index) +{ + enum sci_status status; + + /* Use the general frame handler to copy the resposne data */ + status = scic_sds_stp_request_udma_general_frame_handler(this_request, frame_index); + + if (status == SCI_SUCCESS) { + scic_sds_stp_request_udma_complete_request( + this_request, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_udma_general_frame_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, + }, +}; + +static void scic_sds_stp_request_started_udma_await_tc_completion_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_udma_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE + ); +} + +/** + * + * + * This state is entered when there is an TC completion failure. The hardware + * received an unexpected condition while processing the IO request and now + * will UF the D2H register FIS to complete the IO. + */ +static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_udma_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter, + }, +}; + +/** + * + * @this_request: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. + */ +static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return SCI_SUCCESS; +} + +/** + * + * @this_request: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. + */ +static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler( + struct scic_sds_request *this_request, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &this_request->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + this_request, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return SCI_SUCCESS; +} + +/** + * + * @request: This parameter specifies the request for which a frame has been + * received. + * @frame_index: This parameter specifies the index of the frame that has been + * received. + * + * This method processes frames received from the target while waiting for a + * device to host register FIS. If a non-register FIS is received during this + * time, it is treated as a protocol violation from an IO perspective. Indicate + * if the received frame was processed successfully. + */ +static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + + status = scic_sds_unsolicited_frame_control_get_header( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_header + ); + + if (status == SCI_SUCCESS) { + switch (frame_header->fis_type) { + case SATA_FIS_TYPE_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer( + &(this_request->parent.owning_controller->uf_control), + frame_index, + (void **)&frame_buffer + ); + + scic_sds_controller_copy_sata_response( + &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer + ); + + /* The command has completed with error */ + scic_sds_request_set_status( + &this_request->parent, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID + ); + break; + + default: + dev_warn(scic_to_dev(request->owning_controller), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", + __func__, + this_request, + frame_index); + + scic_sds_request_set_status( + &this_request->parent, + SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION + ); + break; + } + + sci_base_state_machine_change_state( + &this_request->parent.parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame( + this_request->parent.owning_controller, frame_index + ); + } else + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, this_request, frame_index, status); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { + .parent.start_handler = scic_sds_request_default_start_handler, + .parent.abort_handler = scic_sds_request_started_state_abort_handler, + .parent.complete_handler = scic_sds_request_default_complete_handler, + .parent.destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, + }, +}; + +static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_soft_reset_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + this_request->target_device, this_request + ); +} + +static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + sci_base_controller_request_handler_t continue_io; + struct scu_task_context *task_context; + struct sata_fis_reg_h2d *h2d_fis; + struct scic_sds_controller *scic; + enum sci_status status; + u32 state; + + /* Clear the SRST bit */ + h2d_fis = scic_stp_io_request_get_h2d_reg_address(this_request); + h2d_fis->control = 0; + + /* Clear the TC control bit */ + task_context = scic_sds_controller_get_task_context_buffer( + this_request->owning_controller, this_request->io_tag); + task_context->control_frame = 0; + + scic = this_request->owning_controller; + state = scic->parent.state_machine.current_state_id; + continue_io = scic_sds_controller_state_handler_table[state].base.continue_io; + + status = continue_io(&scic->parent, &this_request->target_device->parent, + &this_request->parent); + + if (status == SCI_SUCCESS) { + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_soft_reset_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE + ); + } +} + +static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( + struct sci_base_object *object) +{ + struct scic_sds_request *this_request = (struct scic_sds_request *)object; + + SET_STATE_HANDLER( + this_request, + scic_sds_stp_request_started_soft_reset_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE + ); +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_d2h_response_enter, + }, +}; + diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h new file mode 100644 index 0000000..5578d2b --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -0,0 +1,221 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_STP_REQUEST_T_ +#define _SCIC_SDS_STP_REQUEST_T_ + +#include "intel_sata.h" +#include "sci_types.h" +#include "scic_sds_request.h" + +/** + * This structure represents the additional information that is required to + * handle SATA PIO requests. + * + * + */ +struct scic_sds_stp_request { + struct scic_sds_request parent; + + struct sata_fis_reg_d2h d2h_reg_fis; + + union { + u32 ncq; + + u32 udma; + + struct { + /** + * Total transfer for the entire PIO request recorded at request constuction + * time. + * + * @todo Should we just decrement this value for each byte of data transitted + * or received to elemenate the current_transfer_bytes field? + */ + u32 total_transfer_bytes; + + /** + * Total number of bytes received/transmitted in data frames since the start + * of the IO request. At the end of the IO request this should equal the + * total_transfer_bytes. + */ + u32 current_transfer_bytes; + + /** + * The number of bytes requested in the in the PIO setup. + */ + u32 pio_transfer_bytes; + + /** + * PIO Setup ending status value to tell us if we need to wait for another FIS + * or if the transfer is complete. On the receipt of a D2H FIS this will be + * the status field of that FIS. + */ + u8 ending_status; + + /** + * On receipt of a D2H FIS this will be the ending error field if the + * ending_status has the SATA_STATUS_ERR bit set. + */ + u8 ending_error; + + /** + * Protocol Type. This is filled in by core during IO Request construction type. + */ + u8 sat_protocol; + + struct { + struct scu_sgl_element_pair *sgl_pair; + u8 sgl_set; + u32 sgl_offset; + } request_current; + } pio; + + struct { + /** + * The number of bytes requested in the PIO setup before CDB data frame. + */ + u32 device_preferred_cdb_length; + } packet; + } type; + +}; + +/** + * enum SCIC_SDS_STP_REQUEST_STARTED_UDMA_SUBSTATES - This enumeration depicts + * the various sub-states associated with a SATA/STP UDMA protocol operation. + * + * + */ +enum SCIC_SDS_STP_REQUEST_STARTED_UDMA_SUBSTATES { + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE, +}; + +/** + * enum SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_SUBSTATES - This enumeration + * depicts the various sub-states associated with a SATA/STP non-data + * protocol operation. + * + * + */ +enum SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_SUBSTATES { + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE, +}; + +/** + * enum SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_SUBSTATES - THis enumeration + * depicts the various sub-states associated with a SATA/STP soft reset + * operation. + * + * + */ +enum SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_SUBSTATES { + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE, +}; + +extern const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[]; + +extern const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[]; + +extern const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[]; + +extern const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[]; + +extern const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[]; + +extern const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[]; + +/* --------------------------------------------------------------------------- */ + +u32 scic_sds_stp_request_get_object_size(void); + + +void scic_sds_stp_non_ncq_request_construct( + struct scic_sds_request *this_request); + +enum sci_status scic_sds_stp_pio_request_construct( + struct scic_sds_request *scic_io_request, + u8 sat_protocol, + bool copy_rx_frame); + +enum sci_status scic_sds_stp_pio_request_construct_pass_through( + struct scic_sds_request *scic_io_request, + struct scic_stp_passthru_request_callbacks *passthru_cb); + +enum sci_status scic_sds_stp_udma_request_construct( + struct scic_sds_request *this_request, + u32 transfer_length, + SCI_IO_REQUEST_DATA_DIRECTION data_direction); + +enum sci_status scic_sds_stp_non_data_request_construct( + struct scic_sds_request *this_request); + +enum sci_status scic_sds_stp_soft_reset_request_construct( + struct scic_sds_request *this_request); + +enum sci_status scic_sds_stp_ncq_request_construct( + struct scic_sds_request *this_request, + u32 transfer_length, + SCI_IO_REQUEST_DATA_DIRECTION data_direction); + +void scu_stp_raw_request_construct_task_context( + struct scic_sds_stp_request *this_request, + struct scu_task_context *task_context); + +#endif /* _SCIC_SDS_STP_REQUEST_T_ */ diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c new file mode 100644 index 0000000..7ca2f17 --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c @@ -0,0 +1,379 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the implementation of the + * struct scic_sds_unsolicited_frame_control object and it's public, protected, and + * private methods. + * + * + */ + +#include "scic_sds_unsolicited_frame_control.h" +#include "scu_registers.h" +#include "scic_sds_controller.h" +#include "scic_user_callback.h" +#include "sci_util.h" +#include "sci_environment.h" + +/** + * The UF buffer address table size must be programmed to a power of 2. Find + * the first power of 2 that is equal to or greater then the number of + * unsolicited frame buffers to be utilized. + * @uf_control: This parameter specifies the UF control object for which to + * update the address table count. + * + */ +void scic_sds_unsolicited_frame_control_set_address_table_count( + struct scic_sds_unsolicited_frame_control *uf_control) +{ + uf_control->address_table.count = SCU_MIN_UF_TABLE_ENTRIES; + while ( + (uf_control->address_table.count < uf_control->buffers.count) + && (uf_control->address_table.count < SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES) + ) { + uf_control->address_table.count <<= 1; + } +} + +/** + * This method will program the unsolicited frames (UFs) into the UF address + * table and construct the UF frame structure being modeled in the core. It + * will handle the case where some of the UFs are not being used and thus + * should have entries programmed to zero in the address table. + * @uf_control: This parameter specifies the unsolicted frame control object + * for which to construct the unsolicited frames objects. + * @uf_buffer_phys_address: This parameter specifies the physical address for + * the first unsolicited frame buffer. + * @uf_buffer_virt_address: This parameter specifies the virtual address for + * the first unsolicited frame buffer. + * @unused_uf_header_entries: This parameter specifies the number of unused UF + * headers. This value can be non-zero when there are a non-power of 2 + * number of unsolicited frames being supported. + * @used_uf_header_entries: This parameter specifies the number of actually + * utilized UF headers. + * + */ +static void scic_sds_unsolicited_frame_control_construct_frames( + struct scic_sds_unsolicited_frame_control *uf_control, + dma_addr_t uf_buffer_phys_address, + unsigned long uf_buffer_virt_address, + u32 unused_uf_header_entries, + u32 used_uf_header_entries) +{ + u32 index; + struct scic_sds_unsolicited_frame *uf; + + /* + * Program the unused buffers into the UF address table and the + * controller's array of UFs. */ + for (index = 0; index < unused_uf_header_entries; index++) { + uf = &uf_control->buffers.array[index]; + + sci_cb_make_physical_address( + uf_control->address_table.array[index], 0, 0 + ); + uf->buffer = NULL; + uf->header = &uf_control->headers.array[index]; + uf->state = UNSOLICITED_FRAME_EMPTY; + } + + /* + * Program the actual used UF buffers into the UF address table and + * the controller's array of UFs. */ + for (index = unused_uf_header_entries; + index < unused_uf_header_entries + used_uf_header_entries; + index++) { + uf = &uf_control->buffers.array[index]; + + uf_control->address_table.array[index] = uf_buffer_phys_address; + + uf->buffer = (void *)uf_buffer_virt_address; + uf->header = &uf_control->headers.array[index]; + uf->state = UNSOLICITED_FRAME_EMPTY; + + /* + * Increment the address of the physical and virtual memory pointers + * Everything is aligned on 1k boundary with an increment of 1k */ + uf_buffer_virt_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + sci_physical_address_add( + uf_buffer_phys_address, SCU_UNSOLICITED_FRAME_BUFFER_SIZE + ); + } +} + +/** + * This method constructs the various members of the unsolicted frame control + * object (buffers, headers, address, table, etc). + * @uf_control: This parameter specifies the unsolicited frame control object + * to construct. + * @mde: This parameter specifies the memory descriptor from which to derive + * all of the address information needed to get the unsolicited frame + * functionality working. + * @controller: This parameter specifies the controller object associated with + * the uf_control being constructed. + * + */ +void scic_sds_unsolicited_frame_control_construct( + struct scic_sds_unsolicited_frame_control *uf_control, + struct sci_physical_memory_descriptor *mde, + struct scic_sds_controller *controller) +{ + u32 unused_uf_header_entries; + u32 used_uf_header_entries; + u32 used_uf_buffer_bytes; + u32 unused_uf_header_bytes; + u32 used_uf_header_bytes; + dma_addr_t uf_buffer_phys_address; + + /* + * Prepare all of the memory sizes for the UF headers, UF address + * table, and UF buffers themselves. */ + used_uf_buffer_bytes = uf_control->buffers.count + * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + unused_uf_header_entries = uf_control->address_table.count + - uf_control->buffers.count; + used_uf_header_entries = uf_control->buffers.count; + unused_uf_header_bytes = unused_uf_header_entries + * sizeof(struct scu_unsolicited_frame_header); + used_uf_header_bytes = used_uf_header_entries + * sizeof(struct scu_unsolicited_frame_header); + + /* + * The Unsolicited Frame buffers are set at the start of the UF + * memory descriptor entry. The headers and address table will be + * placed after the buffers. */ + uf_buffer_phys_address = mde->physical_address; + + /* + * Program the location of the UF header table into the SCU. + * Notes: + * - The address must align on a 64-byte boundary. Guaranteed to be + * on 64-byte boundary already 1KB boundary for unsolicited frames. + * - Program unused header entries to overlap with the last + * unsolicited frame. The silicon will never DMA to these unused + * headers, since we program the UF address table pointers to + * NULL. */ + uf_control->headers.physical_address = uf_buffer_phys_address; + sci_physical_address_add( + uf_control->headers.physical_address, used_uf_buffer_bytes); + sci_physical_address_subtract( + uf_control->headers.physical_address, unused_uf_header_bytes); + uf_control->headers.array + = (struct scu_unsolicited_frame_header *) + scic_cb_get_virtual_address( + controller, uf_control->headers.physical_address + ); + + /* + * Program the location of the UF address table into the SCU. + * Notes: + * - The address must align on a 64-bit boundary. Guaranteed to be on 64 + * byte boundary already due to above programming headers being on a + * 64-bit boundary and headers are on a 64-bytes in size. */ + uf_control->address_table.physical_address = uf_buffer_phys_address; + sci_physical_address_add( + uf_control->address_table.physical_address, used_uf_buffer_bytes); + sci_physical_address_add( + uf_control->address_table.physical_address, used_uf_header_bytes); + uf_control->address_table.array + = (dma_addr_t *) + scic_cb_get_virtual_address( + controller, uf_control->address_table.physical_address + ); + + uf_control->get = 0; + + /* + * UF buffer requirements are: + * - The last entry in the UF queue is not NULL. + * - There is a power of 2 number of entries (NULL or not-NULL) + * programmed into the queue. + * - Aligned on a 1KB boundary. */ + + /* + * If the user provided less then the maximum amount of memory, + * then be sure that we programm the first entries in the UF + * address table to NULL. */ + scic_sds_unsolicited_frame_control_construct_frames( + uf_control, + uf_buffer_phys_address, + (unsigned long)mde->virtual_address, + unused_uf_header_entries, + used_uf_header_entries + ); +} + +/** + * This method returns the frame header for the specified frame index. + * @uf_control: + * @frame_index: + * @frame_header: + * + * enum sci_status + */ +enum sci_status scic_sds_unsolicited_frame_control_get_header( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header) +{ + if (frame_index < uf_control->address_table.count) { + /* + * Skip the first word in the frame since this is a controll word used + * by the hardware. */ + *frame_header = &uf_control->buffers.array[frame_index].header->data; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PARAMETER_VALUE; +} + +/** + * This method returns the frame buffer for the specified frame index. + * @uf_control: + * @frame_index: + * @frame_buffer: + * + * enum sci_status + */ +enum sci_status scic_sds_unsolicited_frame_control_get_buffer( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer) +{ + if (frame_index < uf_control->address_table.count) { + *frame_buffer = uf_control->buffers.array[frame_index].buffer; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PARAMETER_VALUE; +} + +/** + * This method releases the frame once this is done the frame is available for + * re-use by the hardware. The data contained in the frame header and frame + * buffer is no longer valid. + * @uf_control: This parameter specifies the UF control object + * @frame_index: This parameter specifies the frame index to attempt to release. + * + * This method returns an indication to the caller as to whether the + * unsolicited frame get pointer should be updated. true This value indicates + * the unsolicited frame get pointer should be updated (i.e. write + * SCU_UFQGP_WRITE). false This value indicates the get pointer should not be + * updated. + */ +bool scic_sds_unsolicited_frame_control_release_frame( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index) +{ + u32 frame_get; + u32 frame_cycle; + + frame_get = uf_control->get & (uf_control->address_table.count - 1); + frame_cycle = uf_control->get & uf_control->address_table.count; + + /* + * In the event there are NULL entries in the UF table, we need to + * advance the get pointer in order to find out if this frame should + * be released (i.e. update the get pointer). */ + while (((lower_32_bits(uf_control->address_table.array[frame_get]) + == 0) && + (upper_32_bits(uf_control->address_table.array[frame_get]) + == 0)) && + (frame_get < uf_control->address_table.count)) + frame_get++; + + /* + * The table has a NULL entry as it's last element. This is + * illegal. */ + BUG_ON(frame_get >= uf_control->address_table.count); + + if (frame_index < uf_control->address_table.count) { + uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED; + + /* + * The frame index is equal to the current get pointer so we + * can now free up all of the frame entries that */ + if (frame_get == frame_index) { + while ( + uf_control->buffers.array[frame_get].state + == UNSOLICITED_FRAME_RELEASED + ) { + uf_control->buffers.array[frame_get].state = UNSOLICITED_FRAME_EMPTY; + + INCREMENT_QUEUE_GET( + frame_get, + frame_cycle, + uf_control->address_table.count - 1, + uf_control->address_table.count + ); + } + + uf_control->get = + (SCU_UFQGP_GEN_BIT(ENABLE_BIT) | frame_cycle | frame_get); + + return true; + } else { + /* + * Frames remain in use until we advance the get pointer + * so there is nothing we can do here */ + } + } + + return false; +} + diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h new file mode 100644 index 0000000..49db83f --- /dev/null +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h @@ -0,0 +1,286 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains all of the unsolicited frame related management for the + * address table, the headers, and actual payload buffers. + * + * + */ + +#ifndef _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ +#define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ + +#include "scu_unsolicited_frame.h" +#include "sci_memory_descriptor_list.h" +#include "scu_constants.h" +#include "sci_status.h" + +/** + * enum UNSOLICITED_FRAME_STATE - + * + * This enumeration represents the current unsolicited frame state. The + * controller object can not updtate the hardware unsolicited frame put pointer + * unless it has already processed the priror unsolicited frames. + */ +enum UNSOLICITED_FRAME_STATE { + /** + * This state is when the frame is empty and not in use. It is + * different from the released state in that the hardware could DMA + * data to this frame buffer. + */ + UNSOLICITED_FRAME_EMPTY, + + /** + * This state is set when the frame buffer is in use by by some + * object in the system. + */ + UNSOLICITED_FRAME_IN_USE, + + /** + * This state is set when the frame is returned to the free pool + * but one or more frames prior to this one are still in use. + * Once all of the frame before this one are freed it will go to + * the empty state. + */ + UNSOLICITED_FRAME_RELEASED, + + UNSOLICITED_FRAME_MAX_STATES +}; + +/** + * struct scic_sds_unsolicited_frame - + * + * This is the unsolicited frame data structure it acts as the container for + * the current frame state, frame header and frame buffer. + */ +struct scic_sds_unsolicited_frame { + /** + * This field contains the current frame state + */ + enum UNSOLICITED_FRAME_STATE state; + + /** + * This field points to the frame header data. + */ + struct scu_unsolicited_frame_header *header; + + /** + * This field points to the frame buffer data. + */ + void *buffer; + +}; + +/** + * struct scic_sds_uf_header_array - + * + * This structure contains all of the unsolicited frame header information. + */ +struct scic_sds_uf_header_array { + /** + * This field is represents a virtual pointer to the start + * address of the UF address table. The table contains + * 64-bit pointers as required by the hardware. + */ + struct scu_unsolicited_frame_header *array; + + /** + * This field specifies the physical address location for the UF + * buffer array. + */ + dma_addr_t physical_address; + +}; + +/* + * Determine the size of the unsolicited frame array including + * unused buffers. */ +#if SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES +#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MIN_UF_TABLE_ENTRIES +#else +#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MAX_UNSOLICITED_FRAMES +#endif /* SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES */ + +/** + * struct scic_sds_uf_buffer_array - + * + * This structure contains all of the unsolicited frame buffer (actual payload) + * information. + */ +struct scic_sds_uf_buffer_array { + /** + * This field is the minimum number of unsolicited frames supported by the + * hardware and the number of unsolicited frames requested by the software. + */ + u32 count; + + /** + * This field is the SCIC_UNSOLICITED_FRAME data its used to manage + * the data for the unsolicited frame requests. It also represents + * the virtual address location that corresponds to the + * physical_address field. + */ + struct scic_sds_unsolicited_frame array[SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE]; + + /** + * This field specifies the physical address location for the UF + * buffer array. + */ + dma_addr_t physical_address; + +}; + +/** + * struct scic_sds_uf_address_table_array - + * + * This object maintains all of the unsolicited frame address table specific + * data. The address table is a collection of 64-bit pointers that point to + * 1KB buffers into which the silicon will DMA unsolicited frames. + */ +struct scic_sds_uf_address_table_array { + /** + * This field specifies the actual programmed size of the + * unsolicited frame buffer address table. The size of the table + * can be larger than the actual number of UF buffers, but it must + * be a power of 2 and the last entry in the table is not allowed + * to be NULL. + */ + u32 count; + + /** + * This field represents a virtual pointer that refers to the + * starting address of the UF address table. + * 64-bit pointers are required by the hardware. + */ + dma_addr_t *array; + + /** + * This field specifies the physical address location for the UF + * address table. + */ + dma_addr_t physical_address; + +}; + +/** + * struct scic_sds_unsolicited_frame_control - + * + * This object contains all of the data necessary to handle unsolicited frames. + */ +struct scic_sds_unsolicited_frame_control { + /** + * This field is the software copy of the unsolicited frame queue + * get pointer. The controller object writes this value to the + * hardware to let the hardware put more unsolicited frame entries. + */ + u32 get; + + /** + * This field contains all of the unsolicited frame header + * specific fields. + */ + struct scic_sds_uf_header_array headers; + + /** + * This field contains all of the unsolicited frame buffer + * specific fields. + */ + struct scic_sds_uf_buffer_array buffers; + + /** + * This field contains all of the unsolicited frame address table + * specific fields. + */ + struct scic_sds_uf_address_table_array address_table; + +}; + +void scic_sds_unsolicited_frame_control_set_address_table_count( + struct scic_sds_unsolicited_frame_control *uf_control); + +struct scic_sds_controller; +void scic_sds_unsolicited_frame_control_construct( + struct scic_sds_unsolicited_frame_control *uf_control, + struct sci_physical_memory_descriptor *mde, + struct scic_sds_controller *this_controller); + +enum sci_status scic_sds_unsolicited_frame_control_get_header( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header); + +enum sci_status scic_sds_unsolicited_frame_control_get_buffer( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer); + +bool scic_sds_unsolicited_frame_control_release_frame( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index); + +/** + * scic_sds_unsolicited_frame_control_get_mde_size() - + * + * This macro simply calculates the size of the memory descriptor entry that + * relates to unsolicited frames and the surrounding silicon memory required to + * utilize it. + */ +#define scic_sds_unsolicited_frame_control_get_mde_size(uf_control) \ + (((uf_control).buffers.count * SCU_UNSOLICITED_FRAME_BUFFER_SIZE) \ + + ((uf_control).address_table.count * sizeof(dma_addr_t)) \ + + ((uf_control).buffers.count * sizeof(struct scu_unsolicited_frame_header))) + +#endif /* _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ */ diff --git a/drivers/scsi/isci/core/scic_task_request.h b/drivers/scsi/isci/core/scic_task_request.h new file mode 100644 index 0000000..ef76cb6 --- /dev/null +++ b/drivers/scsi/isci/core/scic_task_request.h @@ -0,0 +1,148 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_TASK_REQUEST_H_ +#define _SCIC_TASK_REQUEST_H_ + +/** + * This file contains the structures and interface methods that can be + * referenced and used by the SCI user for to utilize task management + * requests. + * + * + */ + + +#include "sci_types.h" +#include "sci_status.h" + +struct scic_sds_request; +struct scic_sds_remote_device; +struct scic_sds_controller; + + +/** + * scic_task_request_construct() - This method is called by the SCI user to + * construct all SCI Core task management requests, regardless of protocol. + * Memory initialization and functionality common to all task request types + * is performed in this method. + * @scic_controller: the handle to the core controller object for which to + * build the task managmement request. + * @scic_remote_device: the handle to the core remote device object for which + * to build the task management request. passed, then a copy of the request + * is built internally. The request will be copied into the actual + * controller request memory when the task is allocated internally during + * the scic_controller_start_task() method. + * @io_tag: This parameter specifies the IO tag to be associated with this + * request. If SCI_CONTROLLER_INVALID_IO_TAG is passed, then a copy of the + * request is built internally. The request will be copied into the actual + * controller request memory when the IO tag is allocated internally during + * the scic_controller_start_io() method. + * @user_task_request_object: This parameter specifies the user task request to + * be utilized during construction. This task pointer will become the + * associated object for the core task request object. + * @scic_task_request_memory: This parameter specifies the memory location to + * be utilized when building the core request. + * @new_scic_task_request_handle: This parameter specifies a pointer to the + * handle the core will expect in further interactions with the core task + * request object. + * + * The SCI core implementation will create an association between the user task + * request object and the core task request object. Indicate if the controller + * successfully built the task request. SCI_SUCCESS This value is returned if + * the task request was successfully built. + */ +enum sci_status scic_task_request_construct( + struct scic_sds_controller *scic_controller, + struct scic_sds_remote_device *scic_remote_device, + u16 io_tag, + void *user_task_request_object, + void *scic_task_request_memory, + struct scic_sds_request **new_scic_task_request_handle); + +/** + * scic_task_request_construct_ssp() - This method is called by the SCI user to + * construct all SCI Core SSP task management requests. Memory + * initialization and functionality common to all task request types is + * performed in this method. + * @scic_task_request: This parameter specifies the handle to the core task + * request object for which to construct a SATA specific task management + * request. + * + * Indicate if the controller successfully built the task request. SCI_SUCCESS + * This value is returned if the task request was successfully built. + */ +enum sci_status scic_task_request_construct_ssp( + struct scic_sds_request *scic_task_request); + +/** + * scic_task_request_construct_sata() - This method is called by the SCI user + * to construct all SCI Core SATA task management requests. Memory + * initialization and functionality common to all task request types is + * performed in this method. + * @scic_task_request_handle: This parameter specifies the handle to the core + * task request object for which to construct a SATA specific task + * management request. + * + * Indicate if the controller successfully built the task request. SCI_SUCCESS + * This value is returned if the task request was successfully built. + */ +enum sci_status scic_task_request_construct_sata( + struct scic_sds_request *scic_task_request_handle); + + + +#endif /* _SCIC_TASK_REQUEST_H_ */ + diff --git a/drivers/scsi/isci/core/scic_user_callback.h b/drivers/scsi/isci/core/scic_user_callback.h new file mode 100644 index 0000000..6eca5a9 --- /dev/null +++ b/drivers/scsi/isci/core/scic_user_callback.h @@ -0,0 +1,740 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_USER_CALLBACK_H_ +#define _SCIC_USER_CALLBACK_H_ + +/** + * This file contains all of the interface methods/macros that must be + * implemented by an SCI Core user. + * + * + */ + + +#include "sci_types.h" +#include "sci_status.h" + +struct scic_sds_request; +struct scic_sds_phy; +struct scic_sds_port; +struct scic_sds_remote_device; +struct scic_sds_controller; + +/** + * scic_cb_timer_create() - This callback method asks the user to create a + * timer and provide a handle for this timer for use in further timer + * interactions. + * @controller: This parameter specifies the controller with which this timer + * is to be associated. + * @timer_callback: This parameter specifies the callback method to be invoked + * whenever the timer expires. + * @cookie: This parameter specifies a piece of information that the user must + * retain. This cookie is to be supplied by the user anytime a timeout + * occurs for the created timer. + * + * The "timer_callback" method should be executed in a mutually exlusive manner + * from the controller completion handler handler (refer to + * scic_controller_get_handler_methods()). This method returns a handle to a + * timer object created by the user. The handle will be utilized for all + * further interactions relating to this timer. + */ +void *scic_cb_timer_create( + struct scic_sds_controller *controller, + void (*timer_callback)(void *), + void *cookie); + + +/** + * scic_cb_timer_start() - This callback method asks the user to start the + * supplied timer. + * @controller: This parameter specifies the controller with which this timer + * is to associated. + * @timer: This parameter specifies the timer to be started. + * @milliseconds: This parameter specifies the number of milliseconds for which + * to stall. The operating system driver is allowed to round this value up + * where necessary. + * + * All timers in the system started by the SCI Core are one shot timers. + * Therefore, the SCI user should make sure that it removes the timer from it's + * list when a timer actually fires. Additionally, SCI Core user's should be + * able to handle calls from the SCI Core to stop a timer that may already be + * stopped. none + */ +void scic_cb_timer_start( + struct scic_sds_controller *controller, + void *timer, + u32 milliseconds); + +/** + * scic_cb_timer_stop() - This callback method asks the user to stop the + * supplied timer. + * @controller: This parameter specifies the controller with which this timer + * is to associated. + * @timer: This parameter specifies the timer to be stopped. + * + */ +void scic_cb_timer_stop( + struct scic_sds_controller *controller, + void *timer); + +/** + * scic_cb_stall_execution() - This method is called when the core requires the + * OS driver to stall execution. This method is utilized during + * initialization or non-performance paths only. + * @microseconds: This parameter specifies the number of microseconds for which + * to stall. The operating system driver is allowed to round this value up + * where necessary. + * + * none. + */ +void scic_cb_stall_execution( + u32 microseconds); + +/** + * scic_cb_controller_start_complete() - This user callback will inform the + * user that the controller has finished the start process. + * @controller: This parameter specifies the controller that was started. + * @completion_status: This parameter specifies the results of the start + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void scic_cb_controller_start_complete( + struct scic_sds_controller *controller, + enum sci_status completion_status); + +/** + * scic_cb_controller_stop_complete() - This user callback will inform the user + * that the controller has finished the stop process. + * @controller: This parameter specifies the controller that was stopped. + * @completion_status: This parameter specifies the results of the stop + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void scic_cb_controller_stop_complete( + struct scic_sds_controller *controller, + enum sci_status completion_status); + +/** + * scic_cb_io_request_complete() - This user callback will inform the user that + * an IO request has completed. + * @controller: This parameter specifies the controller on which the IO is + * completing. + * @remote_device: This parameter specifies the remote device on which this IO + * request is completing. + * @io_request: This parameter specifies the IO request that has completed. + * @completion_status: This parameter specifies the results of the IO request + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void scic_cb_io_request_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request, + enum sci_io_status completion_status); + +/** + * scic_cb_task_request_complete() - This user callback will inform the user + * that a task management request completed. + * @controller: This parameter specifies the controller on which the task + * management request is completing. + * @remote_device: This parameter specifies the remote device on which this + * task management request is completing. + * @task_request: This parameter specifies the task management request that has + * completed. + * @completion_status: This parameter specifies the results of the IO request + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void scic_cb_task_request_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *task_request, + enum sci_task_status completion_status); + +#ifndef SCI_GET_PHYSICAL_ADDRESS_OPTIMIZATION_ENABLED +/** + * scic_cb_io_request_get_physical_address() - This callback method asks the + * user to provide the physical address for the supplied virtual address + * when building an io request object. + * @controller: This parameter is the core controller object handle. + * @io_request: This parameter is the io request object handle for which the + * physical address is being requested. + * @virtual_address: This paramter is the virtual address which is to be + * returned as a physical address. + * @physical_address: The physical address for the supplied virtual address. + * + * None. + */ +void scic_cb_io_request_get_physical_address( + struct scic_sds_controller *controller, + struct scic_sds_request *io_request, + void *virtual_address, + dma_addr_t *physical_address); +#endif /* SCI_GET_PHYSICAL_ADDRESS_OPTIMIZATION_ENABLED */ + +/** + * scic_cb_io_request_get_transfer_length() - This callback method asks the + * user to provide the number of bytes to be transfered as part of this + * request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the number of payload data bytes to be transfered for + * this IO request. + */ +u32 scic_cb_io_request_get_transfer_length( + void *scic_user_io_request); + +/** + * scic_cb_io_request_get_data_direction() - This callback method asks the user + * to provide the data direction for this request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the value of SCI_IO_REQUEST_DATA_OUT or + * SCI_IO_REQUEST_DATA_IN, or SCI_IO_REQUEST_NO_DATA. + */ +SCI_IO_REQUEST_DATA_DIRECTION scic_cb_io_request_get_data_direction( + void *scic_user_io_request); + +#ifndef SCI_SGL_OPTIMIZATION_ENABLED +/** + * scic_cb_io_request_get_next_sge() - This callback method asks the user to + * provide the address to where the next Scatter-Gather Element is located. + * Details regarding usage: - Regarding the first SGE: the user should + * initialize an index, or a pointer, prior to construction of the request + * that will reference the very first scatter-gather element. This is + * important since this method is called for every scatter-gather element, + * including the first element. - Regarding the last SGE: the user should + * return NULL from this method when this method is called and the SGL has + * exhausted all elements. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * @current_sge_address: This parameter specifies the address for the current + * SGE (i.e. the one that has just processed). + * @next_sge: An address specifying the location for the next scatter gather + * element to be processed. + * + * None + */ +void scic_cb_io_request_get_next_sge( + void *scic_user_io_request, + void *current_sge_address, + void **next_sge); +#endif /* SCI_SGL_OPTIMIZATION_ENABLED */ + +/** + * scic_cb_sge_get_address_field() - This callback method asks the user to + * provide the contents of the "address" field in the Scatter-Gather Element. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * @sge_address: This parameter specifies the address for the SGE from which to + * retrieve the address field. + * + * A physical address specifying the contents of the SGE's address field. + */ +dma_addr_t scic_cb_sge_get_address_field( + void *scic_user_io_request, + void *sge_address); + +/** + * scic_cb_sge_get_length_field() - This callback method asks the user to + * provide the contents of the "length" field in the Scatter-Gather Element. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * @sge_address: This parameter specifies the address for the SGE from which to + * retrieve the address field. + * + * This method returns the length field specified inside the SGE referenced by + * the sge_address parameter. + */ +u32 scic_cb_sge_get_length_field( + void *scic_user_io_request, + void *sge_address); + +/** + * scic_cb_ssp_io_request_get_cdb_address() - This callback method asks the + * user to provide the address for the command descriptor block (CDB) + * associated with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the virtual address of the CDB. + */ +void *scic_cb_ssp_io_request_get_cdb_address( + void *scic_user_io_request); + +/** + * scic_cb_ssp_io_request_get_cdb_length() - This callback method asks the user + * to provide the length of the command descriptor block (CDB) associated + * with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the length of the CDB. + */ +u32 scic_cb_ssp_io_request_get_cdb_length( + void *scic_user_io_request); + +/** + * scic_cb_ssp_io_request_get_lun() - This callback method asks the user to + * provide the Logical Unit (LUN) associated with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * The contents of the value returned from this callback are defined by the + * protocol standard (e.g. T10 SAS specification). Please refer to the + * transport command information unit description in the associated standard. + * This method returns the LUN associated with this request. This should be u64? + */ +u32 scic_cb_ssp_io_request_get_lun( + void *scic_user_io_request); + +/** + * scic_cb_ssp_io_request_get_task_attribute() - This callback method asks the + * user to provide the task attribute associated with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * The contents of the value returned from this callback are defined by the + * protocol standard (e.g. T10 SAS specification). Please refer to the + * transport command information unit description in the associated standard. + * This method returns the task attribute associated with this IO request. + */ +u32 scic_cb_ssp_io_request_get_task_attribute( + void *scic_user_io_request); + +/** + * scic_cb_ssp_io_request_get_command_priority() - This callback method asks + * the user to provide the command priority associated with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * The contents of the value returned from this callback are defined by the + * protocol standard (e.g. T10 SAS specification). Please refer to the + * transport command information unit description in the associated standard. + * This method returns the command priority associated with this IO request. + */ +u32 scic_cb_ssp_io_request_get_command_priority( + void *scic_user_io_request); + +/** + * scic_cb_io_request_do_copy_rx_frames() - This callback method asks the user + * if the received RX frame data is to be copied to the SGL or should be + * stored by the SCI core to be retrieved later with the + * scic_io_request_get_rx_frame(). + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns true if the SCI core should copy the received frame data + * to the SGL location or false if the SCI user wants to retrieve the frame + * data at a later time. + */ +bool scic_cb_io_request_do_copy_rx_frames( + void *scic_user_io_request); + +/** + * scic_cb_request_get_sat_protocol() - This callback method asks the user to + * return the SAT protocol definition for this IO request. This method is + * only called by the SCI core if the request type constructed is SATA. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns one of the sat.h defined protocols for the given io + * request. + */ +u8 scic_cb_request_get_sat_protocol( + void *scic_user_io_request); + + +/** + * scic_cb_ssp_task_request_get_lun() - This method returns the Logical Unit to + * be utilized for this task management request. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * The contents of the value returned from this callback are defined by the + * protocol standard (e.g. T10 SAS specification). Please refer to the + * transport task information unit description in the associated standard. This + * method returns the LUN associated with this request. This should be u64? + */ +u32 scic_cb_ssp_task_request_get_lun( + void *scic_user_task_request); + +/** + * scic_cb_ssp_task_request_get_function() - This method returns the task + * management function to be utilized for this task request. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * The contents of the value returned from this callback are defined by the + * protocol standard (e.g. T10 SAS specification). Please refer to the + * transport task information unit description in the associated standard. This + * method returns an unsigned byte representing the task management function to + * be performed. + */ +u8 scic_cb_ssp_task_request_get_function( + void *scic_user_task_request); + +/** + * scic_cb_ssp_task_request_get_io_tag_to_manage() - This method returns the + * task management IO tag to be managed. Depending upon the task management + * function the value returned from this method may be ignored. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns an unsigned 16-bit word depicting the IO tag to be + * managed. + */ +u16 scic_cb_ssp_task_request_get_io_tag_to_manage( + void *scic_user_task_request); + +/** + * scic_cb_ssp_task_request_get_response_data_address() - This callback method + * asks the user to provide the virtual address of the response data buffer + * for the supplied IO request. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the virtual address for the response data buffer + * associated with this IO request. + */ +void *scic_cb_ssp_task_request_get_response_data_address( + void *scic_user_task_request); + +/** + * scic_cb_ssp_task_request_get_response_data_length() - This callback method + * asks the user to provide the length of the response data buffer for the + * supplied IO request. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the length of the response buffer data associated with + * this IO request. + */ +u32 scic_cb_ssp_task_request_get_response_data_length( + void *scic_user_task_request); + +/** + * scic_cb_pci_get_bar() - In this method the user must return the base address + * register (BAR) value for the supplied base address register number. + * @controller: The controller for which to retrieve the bar number. + * @bar_number: This parameter depicts the BAR index/number to be read. + * + * Return a pointer value indicating the contents of the BAR. NULL indicates an + * invalid BAR index/number was specified. All other values indicate a valid + * VIRTUAL address from the BAR. + */ +void *scic_cb_pci_get_bar( + struct scic_sds_controller *controller, + u16 bar_number); + +/** + * scic_cb_get_virtual_address() - This callback method asks the user to + * provide the virtual address for the supplied physical address. + * @controller: This parameter is the core controller object handle. + * @physical_address: This parameter is the physical address which is to be + * returned as a virtual address. + * + * The method returns the virtual address for the supplied physical address. + */ +void *scic_cb_get_virtual_address( + struct scic_sds_controller *controller, + dma_addr_t physical_address); + +/** + * scic_cb_port_stop_complete() - This method informs the user when a stop + * operation on the port has completed. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @completion_status: This parameter specifies the status for the operation + * being completed. + * + */ +void scic_cb_port_stop_complete( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + enum sci_status completion_status); + +/** + * scic_cb_port_hard_reset_complete() - This method informs the user when a + * hard reset on the port has completed. This hard reset could have been + * initiated by the user or by the remote port. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @completion_status: This parameter specifies the status for the operation + * being completed. + * + */ +void scic_cb_port_hard_reset_complete( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + enum sci_status completion_status); + +/** + * scic_cb_port_ready() - This method informs the user that the port is now in + * a ready state and can be utilized to issue IOs. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * + */ +void scic_cb_port_ready( + struct scic_sds_controller *controller, + struct scic_sds_port *port); + +/** + * scic_cb_port_not_ready() - This method informs the user that the port is now + * not in a ready (i.e. busy) state and can't be utilized to issue IOs. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @reason_code: This parameter specifies the reason for the port not ready + * callback. + * + */ +void scic_cb_port_not_ready( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + u32 reason_code); + +/** + * scic_cb_port_invalid_link_up() - This method informs the SCI Core user that + * a phy/link became ready, but the phy is not allowed in the port. In some + * situations the underlying hardware only allows for certain phy to port + * mappings. If these mappings are violated, then this API is invoked. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @phy: This parameter specifies the phy that came ready, but the phy can't be + * a valid member of the port. + * + */ +void scic_cb_port_invalid_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +/** + * scic_cb_port_bc_change_primitive_received() - This callback method informs + * the user that a broadcast change primitive was received. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. For instances where the phy on which the primitive was + * received is not part of a port, this parameter will be + * SCI_INVALID_HANDLE_T. + * @phy: This parameter specifies the phy on which the primitive was received. + * + */ +void scic_cb_port_bc_change_primitive_received( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + + + + +/** + * scic_cb_port_link_up() - This callback method informs the user that a phy + * has become operational and is capable of communicating with the remote + * end point. + * @controller: This parameter represents the controller associated with the + * phy. + * @port: This parameter specifies the port object for which the user callback + * is being invoked. There may be conditions where this parameter can be + * SCI_INVALID_HANDLE + * @phy: This parameter specifies the phy object for which the user callback is + * being invoked. + * + */ +void scic_cb_port_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +/** + * scic_cb_port_link_down() - This callback method informs the user that a phy + * is no longer operational and is not capable of communicating with the + * remote end point. + * @controller: This parameter represents the controller associated with the + * phy. + * @port: This parameter specifies the port object for which the user callback + * is being invoked. There may be conditions where this parameter can be + * SCI_INVALID_HANDLE + * @phy: This parameter specifies the phy object for which the user callback is + * being invoked. + * + */ +void scic_cb_port_link_down( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +/** + * scic_cb_remote_device_start_complete() - This user callback method will + * inform the user that a start operation has completed. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the completion callback. + * @completion_status: This parameter specifies the completion status for the + * operation. + * + */ +void scic_cb_remote_device_start_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + enum sci_status completion_status); + +/** + * scic_cb_remote_device_stop_complete() - This user callback method will + * inform the user that a stop operation has completed. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the completion callback. + * @completion_status: This parameter specifies the completion status for the + * operation. + * + */ +void scic_cb_remote_device_stop_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + enum sci_status completion_status); + +/** + * scic_cb_remote_device_ready() - This user callback method will inform the + * user that a remote device is now capable of handling IO requests. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the callback. + * + */ +void scic_cb_remote_device_ready( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device); + +/** + * scic_cb_remote_device_not_ready() - This user callback method will inform + * the user that a remote device is no longer capable of handling IO + * requests (until a ready callback is invoked). + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the callback. + * @reason_code: This paramete specifies the reason the remote device is not + * ready. + * + */ +void scic_cb_remote_device_not_ready( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + u32 reason_code); + +#if !defined(DISABLE_ATAPI) +/** + * scic_cb_stp_packet_io_request_get_cdb_address() - This user callback gets + * from stp packet io's user request the CDB address. + * @scic_user_io_request: + * + * The cdb adress. + */ +void *scic_cb_stp_packet_io_request_get_cdb_address( + void *scic_user_io_request); + +/** + * scic_cb_stp_packet_io_request_get_cdb_length() - This user callback gets + * from stp packet io's user request the CDB length. + * @scic_user_io_request: + * + * The cdb length. + */ +u32 scic_cb_stp_packet_io_request_get_cdb_length( + void *scic_user_io_request); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_cb_stp_packet_io_request_get_cdb_address(scic_user_io_request) NULL +#define scic_cb_stp_packet_io_request_get_cdb_length(scic_user_io_request) 0 +#endif /* !defined(DISABLE_ATAPI) */ + + +#endif /* _SCIC_USER_CALLBACK_H_ */ + diff --git a/drivers/scsi/isci/core/scu_completion_codes.h b/drivers/scsi/isci/core/scu_completion_codes.h new file mode 100644 index 0000000..17ee4c8 --- /dev/null +++ b/drivers/scsi/isci/core/scu_completion_codes.h @@ -0,0 +1,280 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_COMPLETION_CODES_HEADER_ +#define _SCU_COMPLETION_CODES_HEADER_ + +/** + * This file contains the constants and macros for the SCU hardware completion + * codes. + * + * + */ + +#define SCU_COMPLETION_TYPE_SHIFT 28 +#define SCU_COMPLETION_TYPE_MASK 0x70000000 + +/** + * SCU_COMPLETION_TYPE() - + * + * This macro constructs an SCU completion type + */ +#define SCU_COMPLETION_TYPE(type) \ + ((u32)(type) << SCU_COMPLETION_TYPE_SHIFT) + +/** + * SCU_COMPLETION_TYPE() - + * + * These macros contain the SCU completion types SCU_COMPLETION_TYPE + */ +#define SCU_COMPLETION_TYPE_TASK SCU_COMPLETION_TYPE(0) +#define SCU_COMPLETION_TYPE_SDMA SCU_COMPLETION_TYPE(1) +#define SCU_COMPLETION_TYPE_UFI SCU_COMPLETION_TYPE(2) +#define SCU_COMPLETION_TYPE_EVENT SCU_COMPLETION_TYPE(3) +#define SCU_COMPLETION_TYPE_NOTIFY SCU_COMPLETION_TYPE(4) + +/** + * + * + * These constants provide the shift and mask values for the various parts of + * an SCU completion code. + */ +#define SCU_COMPLETION_STATUS_MASK 0x0FFC0000 +#define SCU_COMPLETION_TL_STATUS_MASK 0x0FC00000 +#define SCU_COMPLETION_TL_STATUS_SHIFT 22 +#define SCU_COMPLETION_SDMA_STATUS_MASK 0x003C0000 +#define SCU_COMPLETION_PEG_MASK 0x00010000 +#define SCU_COMPLETION_PORT_MASK 0x00007000 +#define SCU_COMPLETION_PE_MASK SCU_COMPLETION_PORT_MASK +#define SCU_COMPLETION_PE_SHIFT 12 +#define SCU_COMPLETION_INDEX_MASK 0x00000FFF + +/** + * SCU_GET_COMPLETION_TYPE() - + * + * This macro returns the SCU completion type. + */ +#define SCU_GET_COMPLETION_TYPE(completion_code) \ + ((completion_code) & SCU_COMPLETION_TYPE_MASK) + +/** + * SCU_GET_COMPLETION_STATUS() - + * + * This macro returns the SCU completion status. + */ +#define SCU_GET_COMPLETION_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_STATUS_MASK) + +/** + * SCU_GET_COMPLETION_TL_STATUS() - + * + * This macro returns the transport layer completion status. + */ +#define SCU_GET_COMPLETION_TL_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) + +/** + * SCU_MAKE_COMPLETION_STATUS() - + * + * This macro takes a completion code and performs the shift and mask + * operations to turn it into a completion code that can be compared to a + * SCU_GET_COMPLETION_TL_STATUS. + */ +#define SCU_MAKE_COMPLETION_STATUS(completion_code) \ + ((u32)(completion_code) << SCU_COMPLETION_TL_STATUS_SHIFT) + +/** + * SCU_NORMALIZE_COMPLETION_STATUS() - + * + * This macro takes a SCU_GET_COMPLETION_TL_STATUS and normalizes it for a + * return code. + */ +#define SCU_NORMALIZE_COMPLETION_STATUS(completion_code) \ + (\ + ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) \ + >> SCU_COMPLETION_TL_STATUS_SHIFT \ + ) + +/** + * SCU_GET_COMPLETION_SDMA_STATUS() - + * + * This macro returns the SDMA completion status. + */ +#define SCU_GET_COMPLETION_SDMA_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_SDMA_STATUS_MASK) + +/** + * SCU_GET_COMPLETION_PEG() - + * + * This macro returns the Protocol Engine Group from the completion code. + */ +#define SCU_GET_COMPLETION_PEG(completion_code) \ + ((completion_code) & SCU_COMPLETION_PEG_MASK) + +/** + * SCU_GET_COMPLETION_PORT() - + * + * This macro reuturns the logical port index from the completion code. + */ +#define SCU_GET_COMPLETION_PORT(completion_code) \ + ((completion_code) & SCU_COMPLETION_PORT_MASK) + +/** + * SCU_GET_PROTOCOL_ENGINE_INDEX() - + * + * This macro returns the PE index from the completion code. + */ +#define SCU_GET_PROTOCOL_ENGINE_INDEX(completion_code) \ + (((completion_code) & SCU_COMPLETION_PE_MASK) >> SCU_COMPLETION_PE_SHIFT) + +/** + * SCU_GET_COMPLETION_INDEX() - + * + * This macro returns the index of the completion which is either a TCi or an + * RNi depending on the completion type. + */ +#define SCU_GET_COMPLETION_INDEX(completion_code) \ + ((completion_code) & SCU_COMPLETION_INDEX_MASK) + +#define SCU_UNSOLICITED_FRAME_MASK 0x0FFF0000 +#define SCU_UNSOLICITED_FRAME_SHIFT 16 + +/** + * SCU_GET_FRAME_INDEX() - + * + * This macro returns a normalized frame index from an unsolicited frame + * completion. + */ +#define SCU_GET_FRAME_INDEX(completion_code) \ + (\ + ((completion_code) & SCU_UNSOLICITED_FRAME_MASK) \ + >> SCU_UNSOLICITED_FRAME_SHIFT \ + ) + +#define SCU_UNSOLICITED_FRAME_ERROR_MASK 0x00008000 + +/** + * SCU_GET_FRAME_ERROR() - + * + * This macro returns a zero (0) value if there is no frame error otherwise it + * returns non-zero (!0). + */ +#define SCU_GET_FRAME_ERROR(completion_code) \ + ((completion_code) & SCU_UNSOLICITED_FRAME_ERROR_MASK) + +/** + * + * + * These constants represent normalized completion codes which must be shifted + * 18 bits to match it with the hardware completion code. In a 16-bit compiler, + * immediate constants are 16-bit values (the size of an int). If we shift + * those by 18 bits, we completely lose the value. To ensure the value is a + * 32-bit value like we want, each immediate value must be cast to a u32. + */ +#define SCU_TASK_DONE_GOOD ((u32)0x00) +#define SCU_TASK_DONE_CRC_ERR ((u32)0x14) +#define SCU_TASK_DONE_CHECK_RESPONSE ((u32)0x14) +#define SCU_TASK_DONE_GEN_RESPONSE ((u32)0x15) +#define SCU_TASK_DONE_NAK_CMD_ERR ((u32)0x16) +#define SCU_TASK_DONE_LL_R_ERR ((u32)0x17) +#define SCU_TASK_DONE_ACK_NAK_TO ((u32)0x17) +#define SCU_TASK_DONE_LL_PERR ((u32)0x18) +#define SCU_TASK_DONE_LL_SY_TERM ((u32)0x19) +#define SCU_TASK_DONE_NAK_ERR ((u32)0x19) +#define SCU_TASK_DONE_LL_LF_TERM ((u32)0x1A) +#define SCU_TASK_DONE_DATA_LEN_ERR ((u32)0x1A) +#define SCU_TASK_DONE_LL_CL_TERM ((u32)0x1B) +#define SCU_TASK_DONE_LL_ABORT_ERR ((u32)0x1B) +#define SCU_TASK_DONE_SEQ_INV_TYPE ((u32)0x1C) +#define SCU_TASK_DONE_UNEXP_XR ((u32)0x1C) +#define SCU_TASK_DONE_INV_FIS_TYPE ((u32)0x1D) +#define SCU_TASK_DONE_XR_IU_LEN_ERR ((u32)0x1D) +#define SCU_TASK_DONE_INV_FIS_LEN ((u32)0x1E) +#define SCU_TASK_DONE_XR_WD_LEN ((u32)0x1E) +#define SCU_TASK_DONE_SDMA_ERR ((u32)0x1F) +#define SCU_TASK_DONE_OFFSET_ERR ((u32)0x20) +#define SCU_TASK_DONE_MAX_PLD_ERR ((u32)0x21) +#define SCU_TASK_DONE_EXCESS_DATA ((u32)0x22) +#define SCU_TASK_DONE_LF_ERR ((u32)0x23) +#define SCU_TASK_DONE_UNEXP_FIS ((u32)0x24) +#define SCU_TASK_DONE_UNEXP_RESP ((u32)0x24) +#define SCU_TASK_DONE_EARLY_RESP ((u32)0x25) +#define SCU_TASK_DONE_SMP_RESP_TO_ERR ((u32)0x26) +#define SCU_TASK_DONE_DMASETUP_DIRERR ((u32)0x27) +#define SCU_TASK_DONE_SMP_UFI_ERR ((u32)0x27) +#define SCU_TASK_DONE_XFERCNT_ERR ((u32)0x28) +#define SCU_TASK_DONE_SMP_FRM_TYPE_ERR ((u32)0x28) +#define SCU_TASK_DONE_SMP_LL_RX_ERR ((u32)0x29) +#define SCU_TASK_DONE_RESP_LEN_ERR ((u32)0x2A) +#define SCU_TASK_DONE_UNEXP_DATA ((u32)0x2B) +#define SCU_TASK_DONE_OPEN_FAIL ((u32)0x2C) +#define SCU_TASK_DONE_UNEXP_SDBFIS ((u32)0x2D) +#define SCU_TASK_DONE_REG_ERR ((u32)0x2E) +#define SCU_TASK_DONE_SDB_ERR ((u32)0x2F) +#define SCU_TASK_DONE_TASK_ABORT ((u32)0x30) +#define SCU_TASK_OPEN_REJECT_WRONG_DESTINATION ((u32)0x34) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1 ((u32)0x35) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2 ((u32)0x36) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3 ((u32)0x37) +#define SCU_TASK_OPEN_REJECT_BAD_DESTINATION ((u32)0x38) +#define SCU_TASK_OPEN_REJECT_ZONE_VIOLATION ((u32)0x39) +#define SCU_TASK_DONE_VIIT_ENTRY_NV ((u32)0x3A) +#define SCU_TASK_DONE_IIT_ENTRY_NV ((u32)0x3B) +#define SCU_TASK_DONE_RNCNV_OUTBOUND ((u32)0x3C) +#define SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY ((u32)0x3D) +#define SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED ((u32)0x3E) +#define SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED ((u32)0x3F) + +#endif /* _SCU_COMPLETION_CODES_HEADER_ */ diff --git a/drivers/scsi/isci/core/scu_constants.h b/drivers/scsi/isci/core/scu_constants.h new file mode 100644 index 0000000..a99d110 --- /dev/null +++ b/drivers/scsi/isci/core/scu_constants.h @@ -0,0 +1,151 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_CONSTANTS_H_ +#define _SCU_CONSTANTS_H_ + +/** + * This file contains the SCU hardware constants. + * + * + */ + +#include "sci_controller_constants.h" + +/** + * + * + * 2 indicates the maximum number of UFs that can occur for a given IO request. + * The hardware handles reception of additional unsolicited frames while all + * UFs are in use, by holding off the transmitting device. This number could + * be theoretically reduced to 1, but 2 provides for more reliable operation. + * During SATA PIO operation, it is possible under some conditions for there to + * be 3 separate FISes received, back to back to back (PIO Setup, Data, D2H + * Register). It is unlikely to have all 3 pending all at once without some of + * them already being processed. + */ +#define SCU_MIN_UNSOLICITED_FRAMES (1) +#define SCU_MIN_CRITICAL_NOTIFICATIONS (24) +#define SCU_MIN_EVENTS (4) +#define SCU_MIN_COMPLETION_QUEUE_SCRATCH (2) +#define SCU_MIN_COMPLETION_QUEUE_ENTRIES (SCU_MIN_CRITICAL_NOTIFICATIONS \ + + SCU_MIN_EVENTS \ + + SCU_MIN_UNSOLICITED_FRAMES \ + + SCI_MIN_IO_REQUESTS \ + + SCU_MIN_COMPLETION_QUEUE_SCRATCH) + +#define SCU_MAX_CRITICAL_NOTIFICATIONS (384) +#define SCU_MAX_EVENTS (128) +#define SCU_MAX_UNSOLICITED_FRAMES (128) +#define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) +#define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ + + SCU_MAX_EVENTS \ + + SCU_MAX_UNSOLICITED_FRAMES \ + + SCI_MAX_IO_REQUESTS \ + + SCU_MAX_COMPLETION_QUEUE_SCRATCH) + +#if !defined(ENABLE_MINIMUM_MEMORY_MODE) +#define SCU_UNSOLICITED_FRAME_COUNT SCU_MAX_UNSOLICITED_FRAMES +#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MAX_CRITICAL_NOTIFICATIONS +#define SCU_EVENT_COUNT SCU_MAX_EVENTS +#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MAX_COMPLETION_QUEUE_SCRATCH +#define SCU_IO_REQUEST_COUNT SCI_MAX_IO_REQUESTS +#define SCU_IO_REQUEST_SGE_COUNT SCI_MAX_SCATTER_GATHER_ELEMENTS +#define SCU_COMPLETION_QUEUE_COUNT SCU_MAX_COMPLETION_QUEUE_ENTRIES +#else +#define SCU_UNSOLICITED_FRAME_COUNT SCU_MIN_UNSOLICITED_FRAMES +#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MIN_CRITICAL_NOTIFICATIONS +#define SCU_EVENT_COUNT SCU_MIN_EVENTS +#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MIN_COMPLETION_QUEUE_SCRATCH +#define SCU_IO_REQUEST_COUNT SCI_MIN_IO_REQUESTS +#define SCU_IO_REQUEST_SGE_COUNT SCI_MIN_SCATTER_GATHER_ELEMENTS +#define SCU_COMPLETION_QUEUE_COUNT SCU_MIN_COMPLETION_QUEUE_ENTRIES +#endif /* !defined(ENABLE_MINIMUM_MEMORY_OPERATION) */ + +/** + * + * + * The SCU_COMPLETION_QUEUE_COUNT constant indicates the size of the completion + * queue into which the hardware DMAs 32-bit quantas (completion entries). + */ + +/** + * + * + * This queue must be programmed to a power of 2 size (e.g. 32, 64, 1024, etc.). + */ +#if (SCU_COMPLETION_QUEUE_COUNT != 16) && \ + (SCU_COMPLETION_QUEUE_COUNT != 32) && \ + (SCU_COMPLETION_QUEUE_COUNT != 64) && \ + (SCU_COMPLETION_QUEUE_COUNT != 128) && \ + (SCU_COMPLETION_QUEUE_COUNT != 256) && \ + (SCU_COMPLETION_QUEUE_COUNT != 512) && \ + (SCU_COMPLETION_QUEUE_COUNT != 1024) +#error "SCU_COMPLETION_QUEUE_COUNT must be set to a power of 2." +#endif + +#if SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES +#error "Invalid configuration of unsolicited frame constants" +#endif /* SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES */ + +#define SCU_MIN_UF_TABLE_ENTRIES (8) +#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) +#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024) +#define SCU_INVALID_FRAME_INDEX (0xFFFF) + +#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) +#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) + +#endif /* _SCU_CONSTANTS_H_ */ diff --git a/drivers/scsi/isci/core/scu_event_codes.h b/drivers/scsi/isci/core/scu_event_codes.h new file mode 100644 index 0000000..36a945a --- /dev/null +++ b/drivers/scsi/isci/core/scu_event_codes.h @@ -0,0 +1,336 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_EVENT_CODES_HEADER__ +#define __SCU_EVENT_CODES_HEADER__ + +/** + * This file contains the constants and macros for the SCU event codes. + * + * + */ + +#define SCU_EVENT_TYPE_CODE_SHIFT 24 +#define SCU_EVENT_TYPE_CODE_MASK 0x0F000000 + +#define SCU_EVENT_SPECIFIC_CODE_SHIFT 18 +#define SCU_EVENT_SPECIFIC_CODE_MASK 0x00FC0000 + +#define SCU_EVENT_CODE_MASK \ + (SCU_EVENT_TYPE_CODE_MASK | SCU_EVENT_SPECIFIC_CODE_MASK) + +/** + * SCU_EVENT_TYPE() - + * + * This macro constructs an SCU event type from the type value. + */ +#define SCU_EVENT_TYPE(type) \ + ((u32)(type) << SCU_EVENT_TYPE_CODE_SHIFT) + +/** + * SCU_EVENT_SPECIFIC() - + * + * This macro constructs an SCU event specifier from the code value. + */ +#define SCU_EVENT_SPECIFIC(code) \ + ((u32)(code) << SCU_EVENT_SPECIFIC_CODE_SHIFT) + +/** + * SCU_EVENT_MESSAGE() - + * + * This macro constructs a combines an SCU event type and SCU event specifier + * from the type and code values. + */ +#define SCU_EVENT_MESSAGE(type, code) \ + ((type) | SCU_EVENT_SPECIFIC(code)) + +/** + * SCU_EVENT_TYPE() - + * + * SCU_EVENT_TYPES + */ +#define SCU_EVENT_TYPE_SMU_COMMAND_ERROR SCU_EVENT_TYPE(0x08) +#define SCU_EVENT_TYPE_SMU_PCQ_ERROR SCU_EVENT_TYPE(0x09) +#define SCU_EVENT_TYPE_SMU_ERROR SCU_EVENT_TYPE(0x00) +#define SCU_EVENT_TYPE_TRANSPORT_ERROR SCU_EVENT_TYPE(0x01) +#define SCU_EVENT_TYPE_BROADCAST_CHANGE SCU_EVENT_TYPE(0x02) +#define SCU_EVENT_TYPE_OSSP_EVENT SCU_EVENT_TYPE(0x03) +#define SCU_EVENT_TYPE_FATAL_MEMORY_ERROR SCU_EVENT_TYPE(0x0F) +#define SCU_EVENT_TYPE_RNC_SUSPEND_TX SCU_EVENT_TYPE(0x04) +#define SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX SCU_EVENT_TYPE(0x05) +#define SCU_EVENT_TYPE_RNC_OPS_MISC SCU_EVENT_TYPE(0x06) +#define SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT SCU_EVENT_TYPE(0x07) +#define SCU_EVENT_TYPE_ERR_CNT_EVENT SCU_EVENT_TYPE(0x0A) + +/** + * + * + * SCU_EVENT_SPECIFIERS + */ +#define SCU_EVENT_SPECIFIER_DRIVER_SUSPEND 0x20 +#define SCU_EVENT_SPECIFIER_RNC_RELEASE 0x00 + +/** + * + * + * SMU_COMMAND_EVENTS + */ +#define SCU_EVENT_INVALID_CONTEXT_COMMAND \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_COMMAND_ERROR, 0x00) + +/** + * + * + * SMU_PCQ_EVENTS + */ +#define SCU_EVENT_UNCORRECTABLE_PCQ_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_PCQ_ERROR, 0x00) + +/** + * + * + * SMU_EVENTS + */ +#define SCU_EVENT_UNCORRECTABLE_REGISTER_WRITE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x02) +#define SCU_EVENT_UNCORRECTABLE_REGISTER_READ \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x03) +#define SCU_EVENT_PCIE_INTERFACE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x04) +#define SCU_EVENT_FUNCTION_LEVEL_RESET \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x05) + +/** + * + * + * TRANSPORT_LEVEL_ERRORS + */ +#define SCU_EVENT_ACK_NAK_TIMEOUT_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_TRANSPORT_ERROR, 0x00) + +/** + * + * + * BROADCAST_CHANGE_EVENTS + */ +#define SCU_EVENT_BROADCAST_CHANGE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x01) +#define SCU_EVENT_BROADCAST_RESERVED0 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x02) +#define SCU_EVENT_BROADCAST_RESERVED1 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x03) +#define SCU_EVENT_BROADCAST_SES \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x04) +#define SCU_EVENT_BROADCAST_EXPANDER \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x05) +#define SCU_EVENT_BROADCAST_AEN \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x06) +#define SCU_EVENT_BROADCAST_RESERVED3 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x07) +#define SCU_EVENT_BROADCAST_RESERVED4 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x08) +#define SCU_EVENT_PE_SUSPENDED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x09) + +/** + * + * + * OSSP_EVENTS + */ +#define SCU_EVENT_PORT_SELECTOR_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x10) +#define SCU_EVENT_SENT_PORT_SELECTION \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x11) +#define SCU_EVENT_HARD_RESET_TRANSMITTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x12) +#define SCU_EVENT_HARD_RESET_RECEIVED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x13) +#define SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x15) +#define SCU_EVENT_LINK_FAILURE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x16) +#define SCU_EVENT_SATA_SPINUP_HOLD \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x17) +#define SCU_EVENT_SAS_15_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x18) +#define SCU_EVENT_SAS_15 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x19) +#define SCU_EVENT_SAS_30_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1A) +#define SCU_EVENT_SAS_30 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1B) +#define SCU_EVENT_SAS_60_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1C) +#define SCU_EVENT_SAS_60 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1D) +#define SCU_EVENT_SATA_15_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1E) +#define SCU_EVENT_SATA_15 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1F) +#define SCU_EVENT_SATA_30_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x20) +#define SCU_EVENT_SATA_30 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x21) +#define SCU_EVENT_SATA_60_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x22) +#define SCU_EVENT_SATA_60 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x23) +#define SCU_EVENT_SAS_PHY_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x24) +#define SCU_EVENT_SATA_PHY_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x25) + +/** + * + * + * FATAL_INTERNAL_MEMORY_ERROR_EVENTS + */ +#define SCU_EVENT_TSC_RNSC_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x00) +#define SCU_EVENT_TC_RNC_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x01) +#define SCU_EVENT_ZPT_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x02) + +/** + * + * + * REMOTE_NODE_SUSPEND_EVENTS + */ +#define SCU_EVENT_TL_RNC_SUSPEND_TX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x00) +#define SCU_EVENT_TL_RNC_SUSPEND_TX_RX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x00) +#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x20) +#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX_RX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x20) + +/** + * + * + * REMOTE_NODE_MISC_EVENTS + */ +#define SCU_EVENT_POST_RCN_RELEASE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, SCU_EVENT_SPECIFIER_RNC_RELEASE) +#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_ENABLE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x01) +#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_DISABLE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x02) +#define SCU_EVENT_POST_RNC_COMPLETE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x03) +#define SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x04) + +/** + * + * + * ERROR_COUNT_EVENT + */ +#define SCU_EVENT_RX_CREDIT_BLOCKED_RECEIVED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x00) +#define SCU_EVENT_TX_DONE_CREDIT_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x01) +#define SCU_EVENT_RX_DONE_CREDIT_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x02) + +/** + * scu_get_event_type() - + * + * This macro returns the SCU event type from the event code. + */ +#define scu_get_event_type(event_code) \ + ((event_code) & SCU_EVENT_TYPE_CODE_MASK) + +/** + * scu_get_event_specifier() - + * + * This macro returns the SCU event specifier from the event code. + */ +#define scu_get_event_specifier(event_code) \ + ((event_code) & SCU_EVENT_SPECIFIC_CODE_MASK) + +/** + * scu_get_event_code() - + * + * This macro returns the combined SCU event type and SCU event specifier from + * the event code. + */ +#define scu_get_event_code(event_code) \ + ((event_code) & SCU_EVENT_CODE_MASK) + + +/** + * + * + * PTS_SCHEDULE_EVENT + */ +#define SCU_EVENT_SMP_RESPONSE_NO_PE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x00) +#define SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE \ + scu_get_event_specifier(SCU_EVENT_SMP_RESPONSE_NO_PE) + +#define SCU_EVENT_TASK_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x01) +#define SCU_EVENT_SPECIFIC_TASK_TIMEOUT \ + scu_get_event_specifier(SCU_EVENT_TASK_TIMEOUT) + +#define SCU_EVENT_IT_NEXUS_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x02) +#define SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT \ + scu_get_event_specifier(SCU_EVENT_IT_NEXUS_TIMEOUT) + + +#endif /* __SCU_EVENT_CODES_HEADER__ */ diff --git a/drivers/scsi/isci/core/scu_registers.h b/drivers/scsi/isci/core/scu_registers.h new file mode 100644 index 0000000..175d2b9 --- /dev/null +++ b/drivers/scsi/isci/core/scu_registers.h @@ -0,0 +1,1824 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_REGISTERS_H_ +#define _SCU_REGISTERS_H_ + +/** + * This file contains the constants and structures for the SCU memory mapped + * registers. + * + * + */ + +#include "sci_types.h" +#include "scu_viit_data.h" + + +/* Generate a value for an SCU register */ +#define SCU_GEN_VALUE(name, value) \ + (((value) << name ## _SHIFT) & (name ## _MASK)) + +/* + * Generate a bit value for an SCU register + * Make sure that the register MASK is just a single bit */ +#define SCU_GEN_BIT(name) \ + SCU_GEN_VALUE(name, ((u32)1)) + +#define SCU_SET_BIT(name, reg_value) \ + ((reg_value) | SCU_GEN_BIT(name)) + +#define SCU_CLEAR_BIT(name, reg_value) \ + ((reg_value)$ ~(SCU_GEN_BIT(name))) + +/* + * ***************************************************************************** + * Unions for bitfield definitions of SCU Registers + * SMU Post Context Port + * ***************************************************************************** */ +#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_SHIFT (0) +#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_MASK (0x00000FFF) +#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_SHIFT (12) +#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_MASK (0x0000F000) +#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_SHIFT (16) +#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_MASK (0x00030000) +#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_SHIFT (18) +#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_MASK (0x00FC0000) +#define SMU_POST_CONTEXT_PORT_RESERVED_MASK (0xFF000000) + +#define SMU_PCP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_POST_CONTEXT_PORT_ ## name, value) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_STATUS_COMPLETION_SHIFT (31) +#define SMU_INTERRUPT_STATUS_COMPLETION_MASK (0x80000000) +#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_SHIFT (1) +#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_MASK (0x00000002) +#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_SHIFT (0) +#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_MASK (0x00000001) +#define SMU_INTERRUPT_STATUS_RESERVED_MASK (0x7FFFFFFC) + +#define SMU_ISR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_INTERRUPT_STATUS_ ## name) + +#define SMU_ISR_QUEUE_ERROR SMU_ISR_GEN_BIT(QUEUE_ERROR) +#define SMU_ISR_QUEUE_SUSPEND SMU_ISR_GEN_BIT(QUEUE_SUSPEND) +#define SMU_ISR_COMPLETION SMU_ISR_GEN_BIT(COMPLETION) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_MASK_COMPLETION_SHIFT (31) +#define SMU_INTERRUPT_MASK_COMPLETION_MASK (0x80000000) +#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_SHIFT (1) +#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_MASK (0x00000002) +#define SMU_INTERRUPT_MASK_QUEUE_ERROR_SHIFT (0) +#define SMU_INTERRUPT_MASK_QUEUE_ERROR_MASK (0x00000001) +#define SMU_INTERRUPT_MASK_RESERVED_MASK (0x7FFFFFFC) + +#define SMU_IMR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_INTERRUPT_MASK_ ## name) + +#define SMU_IMR_QUEUE_ERROR SMU_IMR_GEN_BIT(QUEUE_ERROR) +#define SMU_IMR_QUEUE_SUSPEND SMU_IMR_GEN_BIT(QUEUE_SUSPEND) +#define SMU_IMR_COMPLETION SMU_IMR_GEN_BIT(COMPLETION) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_SHIFT (0) +#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_MASK (0x0000001F) +#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_SHIFT (8) +#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_MASK (0x0000FF00) +#define SMU_INTERRUPT_COALESCING_CONTROL_RESERVED_MASK (0xFFFF00E0) + +#define SMU_ICC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_INTERRUPT_COALESCING_CONTROL_ ## name, value) + +/* ***************************************************************************** */ +#define SMU_TASK_CONTEXT_RANGE_START_SHIFT (0) +#define SMU_TASK_CONTEXT_RANGE_START_MASK (0x00000FFF) +#define SMU_TASK_CONTEXT_RANGE_ENDING_SHIFT (16) +#define SMU_TASK_CONTEXT_RANGE_ENDING_MASK (0x0FFF0000) +#define SMU_TASK_CONTEXT_RANGE_ENABLE_SHIFT (31) +#define SMU_TASK_CONTEXT_RANGE_ENABLE_MASK (0x80000000) +#define SMU_TASK_CONTEXT_RANGE_RESERVED_MASK (0x7000F000) + +#define SMU_TCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_TASK_CONTEXT_RANGE_ ## name, value) + +#define SMU_TCR_GEN_BIT(name, value) \ + SCU_GEN_BIT(SMU_TASK_CONTEXT_RANGE_ ## name) + +/* ***************************************************************************** */ + +#define SMU_COMPLETION_QUEUE_PUT_POINTER_SHIFT (0) +#define SMU_COMPLETION_QUEUE_PUT_POINTER_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_SHIFT (15) +#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_MASK (0x00008000) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_SHIFT (16) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_SHIFT (26) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_MASK (0x04000000) +#define SMU_COMPLETION_QUEUE_PUT_RESERVED_MASK (0xF8004000) + +#define SMU_CQPR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_PUT_ ## name, value) + +#define SMU_CQPR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_COMPLETION_QUEUE_PUT_ ## name) + +/* ***************************************************************************** */ + +#define SMU_COMPLETION_QUEUE_GET_POINTER_SHIFT (0) +#define SMU_COMPLETION_QUEUE_GET_POINTER_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT (15) +#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_MASK (0x00008000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT (16) +#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT (26) +#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_MASK (0x04000000) +#define SMU_COMPLETION_QUEUE_GET_ENABLE_SHIFT (30) +#define SMU_COMPLETION_QUEUE_GET_ENABLE_MASK (0x40000000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_SHIFT (31) +#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_MASK (0x80000000) +#define SMU_COMPLETION_QUEUE_GET_RESERVED_MASK (0x38004000) + +#define SMU_CQGR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_GET_ ## name, value) + +#define SMU_CQGR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_COMPLETION_QUEUE_GET_ ## name) + +#define SMU_CQGR_CYCLE_BIT \ + SMU_CQGR_GEN_BIT(CYCLE_BIT) + +#define SMU_CQGR_EVENT_CYCLE_BIT \ + SMU_CQGR_GEN_BIT(EVENT_CYCLE_BIT) + +#define SMU_CQGR_GET_POINTER_SET(value) \ + SMU_CQGR_GEN_VAL(POINTER, value) + + +/* ***************************************************************************** */ +#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_SHIFT (0) +#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_SHIFT (16) +#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_CONTROL_RESERVED_MASK (0xFC00C000) + +#define SMU_CQC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_CONTROL_ ## name, value) + +#define SMU_CQC_QUEUE_LIMIT_SET(value) \ + SMU_CQC_GEN_VAL(QUEUE_LIMIT, value) + +#define SMU_CQC_EVENT_LIMIT_SET(value) \ + SMU_CQC_GEN_VAL(EVENT_LIMIT, value) + + +/* ***************************************************************************** */ +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT (0) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK (0x00000FFF) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT (12) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK (0x00007000) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT (15) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK (0x07FF8000) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_SHIFT (27) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK (0x08000000) +#define SMU_DEVICE_CONTEXT_CAPACITY_RESERVED_MASK (0xF0000000) + +#define SMU_DCC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_DEVICE_CONTEXT_CAPACITY_ ## name, value) + +#define SMU_DCC_GET_MAX_PEG(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_LP(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_TC(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_RNC(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT \ + ) + +/* -------------------------------------------------------------------------- */ + +#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_SHIFT (0) +#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_MASK (0x00000001) +#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_SHIFT (1) +#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_MASK (0x00000002) +#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_SHIFT (16) +#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_MASK (0x00010000) +#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_SHIFT (17) +#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_MASK (0x00020000) +#define SMU_CONTROL_STATUS_RESERVED_MASK (0xFFFCFFFC) + +#define SMU_SMUCSR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_CONTROL_STATUS_ ## name) + +#define SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ + (SMU_SMUCSR_GEN_BIT(SCHEDULER_RAM_INIT_COMPLETED)) + +#define SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ + (SMU_SMUCSR_GEN_BIT(CONTEXT_RAM_INIT_COMPLETED)) + +#define SCU_RAM_INIT_COMPLETED \ + (\ + SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ + | SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ + ) + +/* -------------------------------------------------------------------------- */ + +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_SHIFT (0) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_MASK (0x00000001) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_SHIFT (1) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_MASK (0x00000002) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_SHIFT (2) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_MASK (0x00000004) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_SHIFT (3) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_MASK (0x00000008) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_SHIFT (8) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_MASK (0x00000100) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_SHIFT (9) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_MASK (0x00000200) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_SHIFT (10) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_MASK (0x00000400) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_SHIFT (11) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_MASK (0x00000800) + +#define SMU_RESET_PROTOCOL_ENGINE(peg, pe) \ + ((1 << (pe)) << ((peg) * 8)) + +#define SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ + (\ + SMU_RESET_PROTOCOL_ENGINE(peg, 0) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 1) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 2) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 3) \ + ) + +#define SMU_RESET_ALL_PROTOCOL_ENGINES() \ + (\ + SMU_RESET_PEG_PROTOCOL_ENGINES(0) \ + | SMU_RESET_PEG_PROTOCOL_ENGINES(1) \ + ) + +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_SHIFT (16) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_MASK (0x00010000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_SHIFT (17) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_MASK (0x00020000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_SHIFT (18) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_MASK (0x00040000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_SHIFT (19) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_MASK (0x00080000) + +#define SMU_RESET_WIDE_PORT_QUEUE(peg, wide_port) \ + ((1 << ((wide_port) / 2)) << ((peg) * 2) << 16) + +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_SHIFT (20) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_MASK (0x00100000) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_SHIFT (21) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_MASK (0x00200000) +#define SMU_SOFTRESET_CONTROL_RESET_SCU_SHIFT (22) +#define SMU_SOFTRESET_CONTROL_RESET_SCU_MASK (0x00400000) + +/* + * It seems to make sense that if you are going to reset the protocol + * engine group that you would also reset all of the protocol engines */ +#define SMU_RESET_PROTOCOL_ENGINE_GROUP(peg) \ + (\ + (1 << ((peg) + 20)) \ + | SMU_RESET_WIDE_PORT_QUEUE(peg, 0) \ + | SMU_RESET_WIDE_PORT_QUEUE(peg, 1) \ + | SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ + ) + +#define SMU_RESET_ALL_PROTOCOL_ENGINE_GROUPS() \ + (\ + SMU_RESET_PROTOCOL_ENGINE_GROUP(0) \ + | SMU_RESET_PROTOCOL_ENGINE_GROUP(1) \ + ) + +#define SMU_RESET_SCU() (0xFFFFFFFF) + + + +/* ***************************************************************************** */ +#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_SHIFT (0) +#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_MASK (0x00000FFF) +#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_SHIFT (16) +#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_MASK (0x0FFF0000) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_SHIFT (31) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_MASK (0x80000000) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RESERVED_MASK (0x7000F000) + +#define SMU_TCA_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name, value) + +#define SMU_TCA_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name) + +/* ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_RESERVED_MASK (0xFFFFF000) + +#define SCU_UFQC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_ ## name, value) + +#define SCU_UFQC_QUEUE_SIZE_SET(value) \ + SCU_UFQC_GEN_VAL(QUEUE_SIZE, value) + +/* ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_SHIFT (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_MASK (0x00001000) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_RESERVED_MASK (0xFFFFE000) + +#define SCU_UFQPP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name, value) + +#define SCU_UFQPP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name) + +/* + * ***************************************************************************** + * * SDMA Registers + * ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_SHIFT (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_MASK (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_SHIFT (31) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_MASK (0x80000000) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_RESERVED_MASK (0x7FFFE000) + +#define SCU_UFQGP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name, value) + +#define SCU_UFQGP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name) + +#define SCU_UFQGP_CYCLE_BIT(value) \ + SCU_UFQGP_GEN_BIT(CYCLE_BIT, value) + +#define SCU_UFQGP_GET_POINTER(value) \ + SCU_UFQGP_GEN_VALUE(POINTER, value) + +#define SCU_UFQGP_ENABLE(value) \ + (SCU_UFQGP_GEN_BIT(ENABLE) | value) + +#define SCU_UFQGP_DISABLE(value) \ + (~SCU_UFQGP_GEN_BIT(ENABLE) & value) + +#define SCU_UFQGP_VALUE(bit, value) \ + (SCU_UFQGP_CYCLE_BIT(bit) | SCU_UFQGP_GET_POINTER(value)) + +/* ***************************************************************************** */ +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SHIFT (0) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_MASK (0x0000FFFF) +#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (16) +#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00010000) +#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_SHIFT (17) +#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_MASK (0x00020000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_SHIFT (18) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_MASK (0x00040000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_SHIFT (19) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_MASK (0x00080000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_SHIFT (20) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_MASK (0x00100000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_SHIFT (21) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_MASK (0x00200000) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_SHIFT (22) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_MASK (0x00400000) +#define SCU_PDMA_CONFIGURATION_RESERVED_MASK (0xFF800000) + +#define SCU_PDMACR_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_PDMA_CONFIGURATION_ ## name, value) + +#define SCU_PDMACR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PDMA_CONFIGURATION_ ## name) + +#define SCU_PDMACR_BE_GEN_BIT(name) \ + SCU_PCMACR_GEN_BIT(BIG_ENDIAN_CONTROL_ ## name) + +/* ***************************************************************************** */ +#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (8) +#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00000100) + +#define SCU_CDMACR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_CDMA_CONFIGURATION_ ## name) + +/* + * ***************************************************************************** + * * SCU Link Layer Registers + * ***************************************************************************** */ +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_SHIFT (0) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_MASK (0x000000FF) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_SHIFT (8) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_MASK (0x0000FF00) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_SHIFT (16) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_MASK (0x00FF0000) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_SHIFT (24) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_MASK (0xFF000000) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_REQUIRED_MASK (0x00000000) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_DEFAULT_MASK (0x7D00676F) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_RESERVED_MASK (0x00FF0000) + +#define SCU_SAS_SPDTOV_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_ ## name, value) + + +#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_SHIFT (2) +#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_MASK (0x00000004) +#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_SHIFT (4) +#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_MASK (0x00000010) +#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_SHIFT (5) +#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_MASK (0x00000020) +#define SCU_LINK_STATUS_RESERVED_MASK (0xFFFFFFCD) + +#define SCU_SAS_LLSTA_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_STATUS_ ## name) + + +/* TODO: Where is the SATA_PSELTOV register? */ + +/* + * ***************************************************************************** + * * SCU SAS Maximum Arbitration Wait Time Timeout Register + * ***************************************************************************** */ +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_SHIFT (0) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_MASK (0x00007FFF) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_SHIFT (15) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_MASK (0x00008000) + +#define SCU_SAS_MAWTTOV_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name, value) + +#define SCU_SAS_MAWTTOV_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name) + + +/* + * TODO: Where is the SAS_LNKTOV regsiter? + * TODO: Where is the SAS_PHYTOV register? */ + +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT (1) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_MASK (0x00000002) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_SHIFT (2) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_MASK (0x00000004) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_SHIFT (3) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_MASK (0x00000008) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_SHIFT (8) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_MASK (0x00000100) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_SHIFT (9) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_MASK (0x00000200) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_SHIFT (10) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_MASK (0x00000400) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_SHIFT (11) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_MASK (0x00000800) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_SHIFT (16) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_MASK (0x000F0000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_SHIFT (24) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_MASK (0x0F000000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_SHIFT (28) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_MASK (0x70000000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_RESERVED_MASK (0x80F0F1F1) + +#define SCU_SAS_TIID_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name, value) + +#define SCU_SAS_TIID_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name) + +/* SAS Identify Frame PHY Identifier Register */ +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_SHIFT (16) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_MASK (0x00010000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_SHIFT (17) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_MASK (0x00020000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_SHIFT (18) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_MASK (0x00040000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_SHIFT (24) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_MASK (0xFF000000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_RESERVED_MASK (0x00F800FF) + +#define SCU_SAS_TIPID_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name, value) + +#define SCU_SAS_TIPID_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name) + + +#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_SHIFT (4) +#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_MASK (0x00000010) +#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_SHIFT (6) +#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_MASK (0x00000040) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_SHIFT (7) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_MASK (0x00000080) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_SHIFT (8) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_MASK (0x00000100) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_SHIFT (9) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_MASK (0x00000200) +#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_SHIFT (11) +#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_MASK (0x00000800) +#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_SHIFT (12) +#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_MASK (0x00001000) +#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_SHIFT (13) +#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_MASK (0x00002000) +#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_SHIFT (14) +#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_MASK (0x00004000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_SHIFT (15) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_MASK (0x00008000) +#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_SHIFT (23) +#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_MASK (0x00800000) +#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_SHIFT (27) +#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_MASK (0x08000000) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_SHIFT (28) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_MASK (0x10000000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_SHIFT (29) +#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_MASK (0x20000000) +#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_SHIFT (30) +#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_MASK (0x40000000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_SHIFT (31) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_MASK (0x80000000) +#define SCU_SAS_PHY_CONFIGURATION_REQUIRED_MASK (0x0100000F) +#define SCU_SAS_PHY_CONFIGURATION_DEFAULT_MASK (0x4180100F) +#define SCU_SAS_PHY_CONFIGURATION_RESERVED_MASK (0x00000000) + +#define SCU_SAS_PCFG_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name) + + +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT (0) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK (0x0003FFFF) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_SHIFT (31) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_MASK (0x80000000) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_RESERVED_MASK (0x7FFC0000) + +#define SCU_ENSPINUP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name, value) + +#define SCU_ENSPINUP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name) + + +#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_SHIFT (1) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_MASK (0x00000002) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_SHIFT (4) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_MASK (0x000000F0) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_SHIFT (8) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_MASK (0x00000100) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_SHIFT (9) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_MASK (0x00000201) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_SHIFT (10) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_MASK (0x00000401) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_SHIFT (11) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_MASK (0x00000801) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_SHIFT (12) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_MASK (0x00001001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_SHIFT (13) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_MASK (0x00002001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_SHIFT (31) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_MASK (0x80000000) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_DEFAULT_MASK (0x00003F01) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_REQUIRED_MASK (0x00000001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RESERVED_MASK (0x7FFFC00D) + +#define SCU_SAS_PHYCAP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name, value) + +#define SCU_SAS_PHYCAP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name) + + +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_SHIFT (0) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_MASK (0x000000FF) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_SHIFT (31) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_MASK (0x80000000) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_RESERVED_MASK (0x7FFFFF00) + +#define SCU_PSZGCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name, value) + +#define SCU_PSZGCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name) + +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_SHIFT (1) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_MASK (0x00000002) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_SHIFT (2) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_MASK (0x00000004) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_SHIFT (4) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_MASK (0x00000010) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_SHIFT (5) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_MASK (0x00000020) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_SHIFT (16) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_MASK (0x00030000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_SHIFT (19) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_MASK (0x00080000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_SHIFT (20) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_MASK (0x00300000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_SHIFT (23) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_MASK (0x00800000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_SHIFT (24) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_MASK (0x03000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_SHIFT (27) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_MASK (0x08000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_SHIFT (28) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_MASK (0x30000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_SHIFT (31) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_MASK (0x80000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_RESERVED_MASK (0x4444FFC9) + +#define SCU_PEG_SCUVZECR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name, val) + +#define SCU_PEG_SCUVZECR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name) + + +/* + * ***************************************************************************** + * * Port Task Scheduler registers shift and mask values + * ***************************************************************************** */ +#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_SHIFT (0) +#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_MASK (0x0000FFFF) +#define SCU_PTSG_CONTROL_TASK_TIMEOUT_SHIFT (16) +#define SCU_PTSG_CONTROL_TASK_TIMEOUT_MASK (0x00FF0000) +#define SCU_PTSG_CONTROL_PTSG_ENABLE_SHIFT (24) +#define SCU_PTSG_CONTROL_PTSG_ENABLE_MASK (0x01000000) +#define SCU_PTSG_CONTROL_ETM_ENABLE_SHIFT (25) +#define SCU_PTSG_CONTROL_ETM_ENABLE_MASK (0x02000000) +#define SCU_PTSG_CONTROL_DEFAULT_MASK (0x00020002) +#define SCU_PTSG_CONTROL_REQUIRED_MASK (0x00000000) +#define SCU_PTSG_CONTROL_RESERVED_MASK (0xFC000000) + +#define SCU_PTSGCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_CONTROL_ ## name, val) + +#define SCU_PTSGCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_CONTROL_ ## name) + + +/* ***************************************************************************** */ +#define SCU_PTSG_REAL_TIME_CLOCK_SHIFT (0) +#define SCU_PTSG_REAL_TIME_CLOCK_MASK (0x0000FFFF) +#define SCU_PTSG_REAL_TIME_CLOCK_RESERVED_MASK (0xFFFF0000) + +#define SCU_RTCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_ ## name, val) + + +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_SHIFT (0) +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_MASK (0x00FFFFFF) +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_RESERVED_MASK (0xFF000000) + +#define SCU_RTCCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_REAL_TIME_CLOCK_CONTROL_ ## name, val) + + +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_SHIFT (0) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_MASK (0x00000001) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_SHIFT (1) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_MASK (0x00000002) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_RESERVED_MASK (0xFFFFFFFC) + +#define SCU_PTSxCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ ## name) + + +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_SHIFT (0) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_MASK (0x00000001) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_SHIFT (1) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_MASK (0x00000002) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_SHIFT (2) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_MASK (0x00000004) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_RESERVED_MASK (0xFFFFFFF8) + +#define SCU_PTSxSR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name) + + +/* + * ***************************************************************************** + * * SGPIO Register shift and mask values + * ***************************************************************************** */ +#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT (0) +#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK (0x00000001) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT (1) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK (0x00000002) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK (0x00000004) +#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT (15) +#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK (0x00008000) +#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK (0xFFFF7FF8) + +#define SCU_SGICRx_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name) + +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT (0) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK (0x0000000F) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT (4) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK (0x000000F0) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT (8) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK (0x00000F00) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT (12) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK (0x0000F000) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000) + +#define SCU_SGPBRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value) + +#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT (0) +#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK (0x00000003) +#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT (4) +#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK (0x00000030) +#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT (8) +#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK (0x00000300) +#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT (12) +#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK (0x00003000) +#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSDLRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) + +#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT (0) +#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK (0x00000003) +#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT (4) +#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK (0x00000030) +#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT (8) +#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK (0x00000300) +#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT (12) +#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK (0x00003000) +#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSDURx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) + +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT (0) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK (0x00000003) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT (4) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK (0x00000030) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT (8) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK (0x00000300) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT (12) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK (0x00003000) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSIDLRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) + +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT (0) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK (0x00000003) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT (4) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK (0x00000030) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT (8) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK (0x00000300) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT (12) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK (0x00003000) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSIDURx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) + +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT (0) +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK (0x0000000F) +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK (0xFFFFFFF0) + +#define SCU_SGVSCR_GEN_VAL(value) \ + SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value) + +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT (0) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK (0x00000003) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT (2) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK (0x00000004) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT (3) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK (0x00000008) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT (4) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK (0x00000030) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT (6) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK (0x00000040) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT (7) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK (0x00000080) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT (8) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK (0x00000300) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT (10) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK (0x00000400) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT (11) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK (0x00000800) +#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK (0xFFFFF000) + +#define SCU_SGODSR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value) + +#define SCU_SGODSR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name) + +/* + * ***************************************************************************** + * * SMU Registers + * ***************************************************************************** */ + +/* + * ---------------------------------------------------------------------------- + * SMU Registers + * These registers are based off of BAR0 + * + * To calculate the offset for other functions use + * BAR0 + FN# * SystemPageSize * 2 + * + * The TCA is only accessable from FN#0 (Physical Function) and each + * is programmed by (BAR0 + SCU_SMU_TCA_OFFSET + (FN# * 0x04)) or + * TCA0 for FN#0 is at BAR0 + 0x0400 + * TCA1 for FN#1 is at BAR0 + 0x0404 + * etc. + * ---------------------------------------------------------------------------- + * Accessable to all FN#s */ +#define SCU_SMU_PCP_OFFSET 0x0000 +#define SCU_SMU_AMR_OFFSET 0x0004 +#define SCU_SMU_ISR_OFFSET 0x0010 +#define SCU_SMU_IMR_OFFSET 0x0014 +#define SCU_SMU_ICC_OFFSET 0x0018 +#define SCU_SMU_HTTLBAR_OFFSET 0x0020 +#define SCU_SMU_HTTUBAR_OFFSET 0x0024 +#define SCU_SMU_TCR_OFFSET 0x0028 +#define SCU_SMU_CQLBAR_OFFSET 0x0030 +#define SCU_SMU_CQUBAR_OFFSET 0x0034 +#define SCU_SMU_CQPR_OFFSET 0x0040 +#define SCU_SMU_CQGR_OFFSET 0x0044 +#define SCU_SMU_CQC_OFFSET 0x0048 +/* Accessable to FN#0 only */ +#define SCU_SMU_RNCLBAR_OFFSET 0x0080 +#define SCU_SMU_RNCUBAR_OFFSET 0x0084 +#define SCU_SMU_DCC_OFFSET 0x0090 +#define SCU_SMU_DFC_OFFSET 0x0094 +#define SCU_SMU_SMUCSR_OFFSET 0x0098 +#define SCU_SMU_SCUSRCR_OFFSET 0x009C +#define SCU_SMU_SMAW_OFFSET 0x00A0 +#define SCU_SMU_SMDW_OFFSET 0x00A4 +/* Accessable to FN#0 only */ +#define SCU_SMU_TCA_OFFSET 0x0400 +/* Accessable to all FN#s */ +#define SCU_SMU_MT_MLAR0_OFFSET 0x2000 +#define SCU_SMU_MT_MUAR0_OFFSET 0x2004 +#define SCU_SMU_MT_MDR0_OFFSET 0x2008 +#define SCU_SMU_MT_VCR0_OFFSET 0x200C +#define SCU_SMU_MT_MLAR1_OFFSET 0x2010 +#define SCU_SMU_MT_MUAR1_OFFSET 0x2014 +#define SCU_SMU_MT_MDR1_OFFSET 0x2018 +#define SCU_SMU_MT_VCR1_OFFSET 0x201C +#define SCU_SMU_MPBA_OFFSET 0x3000 + +/** + * struct smu_registers - These are the SMU registers + * + * + */ +struct smu_registers { +/* 0x0000 PCP */ + u32 post_context_port; +/* 0x0004 AMR */ + u32 address_modifier; + u32 reserved_08; + u32 reserved_0C; +/* 0x0010 ISR */ + u32 interrupt_status; +/* 0x0014 IMR */ + u32 interrupt_mask; +/* 0x0018 ICC */ + u32 interrupt_coalesce_control; + u32 reserved_1C; +/* 0x0020 HTTLBAR */ + u32 host_task_table_lower; +/* 0x0024 HTTUBAR */ + u32 host_task_table_upper; +/* 0x0028 TCR */ + u32 task_context_range; + u32 reserved_2C; +/* 0x0030 CQLBAR */ + u32 completion_queue_lower; +/* 0x0034 CQUBAR */ + u32 completion_queue_upper; + u32 reserved_38; + u32 reserved_3C; +/* 0x0040 CQPR */ + u32 completion_queue_put; +/* 0x0044 CQGR */ + u32 completion_queue_get; +/* 0x0048 CQC */ + u32 completion_queue_control; + u32 reserved_4C; + u32 reserved_5x[4]; + u32 reserved_6x[4]; + u32 reserved_7x[4]; +/* + * Accessable to FN#0 only + * 0x0080 RNCLBAR */ + u32 remote_node_context_lower; +/* 0x0084 RNCUBAR */ + u32 remote_node_context_upper; + u32 reserved_88; + u32 reserved_8C; +/* 0x0090 DCC */ + u32 device_context_capacity; +/* 0x0094 DFC */ + u32 device_function_capacity; +/* 0x0098 SMUCSR */ + u32 control_status; +/* 0x009C SCUSRCR */ + u32 soft_reset_control; +/* 0x00A0 SMAW */ + u32 mmr_address_window; +/* 0x00A4 SMDW */ + u32 mmr_data_window; + u32 reserved_A8; + u32 reserved_AC; +/* A whole bunch of reserved space */ + u32 reserved_Bx[4]; + u32 reserved_Cx[4]; + u32 reserved_Dx[4]; + u32 reserved_Ex[4]; + u32 reserved_Fx[4]; + u32 reserved_1xx[64]; + u32 reserved_2xx[64]; + u32 reserved_3xx[64]; +/* + * Accessable to FN#0 only + * 0x0400 TCA */ + u32 task_context_assignment[256]; +/* MSI-X registers not included */ +}; + +/* + * ***************************************************************************** + * SDMA Registers + * ***************************************************************************** */ +#define SCU_SDMA_BASE 0x6000 +#define SCU_SDMA_PUFATLHAR_OFFSET 0x0000 +#define SCU_SDMA_PUFATUHAR_OFFSET 0x0004 +#define SCU_SDMA_UFLHBAR_OFFSET 0x0008 +#define SCU_SDMA_UFUHBAR_OFFSET 0x000C +#define SCU_SDMA_UFQC_OFFSET 0x0010 +#define SCU_SDMA_UFQPP_OFFSET 0x0014 +#define SCU_SDMA_UFQGP_OFFSET 0x0018 +#define SCU_SDMA_PDMACR_OFFSET 0x001C +#define SCU_SDMA_CDMACR_OFFSET 0x0080 + +/** + * struct scu_sdma_registers - These are the SCU SDMA Registers + * + * + */ +struct scu_sdma_registers { +/* 0x0000 PUFATLHAR */ + u32 uf_address_table_lower; +/* 0x0004 PUFATUHAR */ + u32 uf_address_table_upper; +/* 0x0008 UFLHBAR */ + u32 uf_header_base_address_lower; +/* 0x000C UFUHBAR */ + u32 uf_header_base_address_upper; +/* 0x0010 UFQC */ + u32 unsolicited_frame_queue_control; +/* 0x0014 UFQPP */ + u32 unsolicited_frame_put_pointer; +/* 0x0018 UFQGP */ + u32 unsolicited_frame_get_pointer; +/* 0x001C PDMACR */ + u32 pdma_configuration; +/* Reserved until offset 0x80 */ + u32 reserved_0020_007C[0x18]; +/* 0x0080 CDMACR */ + u32 cdma_configuration; +/* Remainder SDMA register space */ + u32 reserved_0084_0400[0xDF]; + +}; + +/* + * ***************************************************************************** + * * SCU Link Registers + * ***************************************************************************** */ +#define SCU_PEG0_OFFSET 0x0000 +#define SCU_PEG1_OFFSET 0x8000 + +#define SCU_TL0_OFFSET 0x0000 +#define SCU_TL1_OFFSET 0x0400 +#define SCU_TL2_OFFSET 0x0800 +#define SCU_TL3_OFFSET 0x0C00 + +#define SCU_LL_OFFSET 0x0080 +#define SCU_LL0_OFFSET (SCU_TL0_OFFSET + SCU_LL_OFFSET) +#define SCU_LL1_OFFSET (SCU_TL1_OFFSET + SCU_LL_OFFSET) +#define SCU_LL2_OFFSET (SCU_TL2_OFFSET + SCU_LL_OFFSET) +#define SCU_LL3_OFFSET (SCU_TL3_OFFSET + SCU_LL_OFFSET) + +/* Transport Layer Offsets (PEG + TL) */ +#define SCU_TLCR_OFFSET 0x0000 +#define SCU_TLADTR_OFFSET 0x0004 +#define SCU_TLTTMR_OFFSET 0x0008 +#define SCU_TLEECR0_OFFSET 0x000C +#define SCU_STPTLDARNI_OFFSET 0x0010 + + +#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_SHIFT (0) +#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_MASK (0x00000001) +#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_SHIFT (1) +#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_MASK (0x00000002) +#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_SHIFT (3) +#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_MASK (0x00000008) +#define SCU_TLCR_CMD_NAK_STATUS_CODE_SHIFT (4) +#define SCU_TLCR_CMD_NAK_STATUS_CODE_MASK (0x00000010) +#define SCU_TLCR_RESERVED_MASK (0xFFFFFFEB) + +#define SCU_TLCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_TLCR_ ## name) + +/** + * struct scu_transport_layer_registers - These are the SCU Transport Layer + * registers + * + * + */ +struct scu_transport_layer_registers { + /* 0x0000 TLCR */ + u32 control; + /* 0x0004 TLADTR */ + u32 arbitration_delay_timer; + /* 0x0008 TLTTMR */ + u32 timer_test_mode; + /* 0x000C reserved */ + u32 reserved_0C; + /* 0x0010 STPTLDARNI */ + u32 stp_rni; + /* 0x0014 TLFEWPORCTRL */ + u32 tlfe_wpo_read_control; + /* 0x0018 TLFEWPORDATA */ + u32 tlfe_wpo_read_data; + /* 0x001C RXTLSSCSR1 */ + u32 rxtl_single_step_control_status_1; + /* 0x0020 RXTLSSCSR2 */ + u32 rxtl_single_step_control_status_2; + /* 0x0024 AWTRDDCR */ + u32 tlfe_awt_retry_delay_debug_control; + /* Remainder of TL memory space */ + u32 reserved_0028_007F[0x16]; + +}; + +/* Protocol Engine Group Registers */ +#define SCU_SCUVZECRx_OFFSET 0x1080 + +/* Link Layer Offsets (PEG + TL + LL) */ +#define SCU_SAS_SPDTOV_OFFSET 0x0000 +#define SCU_SAS_LLSTA_OFFSET 0x0004 +#define SCU_SATA_PSELTOV_OFFSET 0x0008 +#define SCU_SAS_TIMETOV_OFFSET 0x0010 +#define SCU_SAS_LOSTOT_OFFSET 0x0014 +#define SCU_SAS_LNKTOV_OFFSET 0x0018 +#define SCU_SAS_PHYTOV_OFFSET 0x001C +#define SCU_SAS_AFERCNT_OFFSET 0x0020 +#define SCU_SAS_WERCNT_OFFSET 0x0024 +#define SCU_SAS_TIID_OFFSET 0x0028 +#define SCU_SAS_TIDNH_OFFSET 0x002C +#define SCU_SAS_TIDNL_OFFSET 0x0030 +#define SCU_SAS_TISSAH_OFFSET 0x0034 +#define SCU_SAS_TISSAL_OFFSET 0x0038 +#define SCU_SAS_TIPID_OFFSET 0x003C +#define SCU_SAS_TIRES2_OFFSET 0x0040 +#define SCU_SAS_ADRSTA_OFFSET 0x0044 +#define SCU_SAS_MAWTTOV_OFFSET 0x0048 +#define SCU_SAS_FRPLDFIL_OFFSET 0x0054 +#define SCU_SAS_RFCNT_OFFSET 0x0060 +#define SCU_SAS_TFCNT_OFFSET 0x0064 +#define SCU_SAS_RFDCNT_OFFSET 0x0068 +#define SCU_SAS_TFDCNT_OFFSET 0x006C +#define SCU_SAS_LERCNT_OFFSET 0x0070 +#define SCU_SAS_RDISERRCNT_OFFSET 0x0074 +#define SCU_SAS_CRERCNT_OFFSET 0x0078 +#define SCU_STPCTL_OFFSET 0x007C +#define SCU_SAS_PCFG_OFFSET 0x0080 +#define SCU_SAS_CLKSM_OFFSET 0x0084 +#define SCU_SAS_TXCOMWAKE_OFFSET 0x0088 +#define SCU_SAS_TXCOMINIT_OFFSET 0x008C +#define SCU_SAS_TXCOMSAS_OFFSET 0x0090 +#define SCU_SAS_COMINIT_OFFSET 0x0094 +#define SCU_SAS_COMWAKE_OFFSET 0x0098 +#define SCU_SAS_COMSAS_OFFSET 0x009C +#define SCU_SAS_SFERCNT_OFFSET 0x00A0 +#define SCU_SAS_CDFERCNT_OFFSET 0x00A4 +#define SCU_SAS_DNFERCNT_OFFSET 0x00A8 +#define SCU_SAS_PRSTERCNT_OFFSET 0x00AC +#define SCU_SAS_CNTCTL_OFFSET 0x00B0 +#define SCU_SAS_SSPTOV_OFFSET 0x00B4 +#define SCU_FTCTL_OFFSET 0x00B8 +#define SCU_FRCTL_OFFSET 0x00BC +#define SCU_FTWMRK_OFFSET 0x00C0 +#define SCU_ENSPINUP_OFFSET 0x00C4 +#define SCU_SAS_TRNTOV_OFFSET 0x00C8 +#define SCU_SAS_PHYCAP_OFFSET 0x00CC +#define SCU_SAS_PHYCTL_OFFSET 0x00D0 +#define SCU_SAS_LLCTL_OFFSET 0x00D8 +#define SCU_AFE_XCVRCR_OFFSET 0x00DC +#define SCU_AFE_LUTCR_OFFSET 0x00E0 + +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 (1) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 (2) +#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_SHIFT (2) +#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_MASK (0x000003FC) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_SHIFT (16) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_MASK (0x00010000) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_SHIFT (17) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_MASK (0x00020000) +#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_SHIFT (24) +#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_MASK (0xFF000000) +#define SCU_SAS_LINK_LAYER_CONTROL_RESERVED (0x00FCFC00) + +#define SCU_SAS_LLCTL_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_LINK_LAYER_CONTROL_ ## name, value) + +#define SCU_SAS_LLCTL_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_LINK_LAYER_CONTROL_ ## name) + + +/* #define SCU_FRXHECR_DCNT_OFFSET 0x00B0 */ +#define SCU_PSZGCR_OFFSET 0x00E4 +#define SCU_SAS_RECPHYCAP_OFFSET 0x00E8 +/* #define SCU_TX_LUTSEL_OFFSET 0x00B8 */ + +#define SCU_SAS_PTxC_OFFSET 0x00D4 /* Same offset as SAS_TCTSTM */ + +/** + * struct scu_link_layer_registers - SCU Link Layer Registers + * + * + */ +struct scu_link_layer_registers { +/* 0x0000 SAS_SPDTOV */ + u32 speed_negotiation_timers; +/* 0x0004 SAS_LLSTA */ + u32 link_layer_status; +/* 0x0008 SATA_PSELTOV */ + u32 port_selector_timeout; + u32 reserved0C; +/* 0x0010 SAS_TIMETOV */ + u32 timeout_unit_value; +/* 0x0014 SAS_RCDTOV */ + u32 rcd_timeout; +/* 0x0018 SAS_LNKTOV */ + u32 link_timer_timeouts; +/* 0x001C SAS_PHYTOV */ + u32 sas_phy_timeouts; +/* 0x0020 SAS_AFERCNT */ + u32 received_address_frame_error_counter; +/* 0x0024 SAS_WERCNT */ + u32 invalid_dword_counter; +/* 0x0028 SAS_TIID */ + u32 transmit_identification; +/* 0x002C SAS_TIDNH */ + u32 sas_device_name_high; +/* 0x0030 SAS_TIDNL */ + u32 sas_device_name_low; +/* 0x0034 SAS_TISSAH */ + u32 source_sas_address_high; +/* 0x0038 SAS_TISSAL */ + u32 source_sas_address_low; +/* 0x003C SAS_TIPID */ + u32 identify_frame_phy_id; +/* 0x0040 SAS_TIRES2 */ + u32 identify_frame_reserved; +/* 0x0044 SAS_ADRSTA */ + u32 received_address_frame; +/* 0x0048 SAS_MAWTTOV */ + u32 maximum_arbitration_wait_timer_timeout; +/* 0x004C SAS_PTxC */ + u32 transmit_primitive; +/* 0x0050 SAS_RORES */ + u32 error_counter_event_notification_control; +/* 0x0054 SAS_FRPLDFIL */ + u32 frxq_payload_fill_threshold; +/* 0x0058 SAS_LLHANG_TOT */ + u32 link_layer_hang_detection_timeout; + u32 reserved_5C; +/* 0x0060 SAS_RFCNT */ + u32 received_frame_count; +/* 0x0064 SAS_TFCNT */ + u32 transmit_frame_count; +/* 0x0068 SAS_RFDCNT */ + u32 received_dword_count; +/* 0x006C SAS_TFDCNT */ + u32 transmit_dword_count; +/* 0x0070 SAS_LERCNT */ + u32 loss_of_sync_error_count; +/* 0x0074 SAS_RDISERRCNT */ + u32 running_disparity_error_count; +/* 0x0078 SAS_CRERCNT */ + u32 received_frame_crc_error_count; +/* 0x007C STPCTL */ + u32 stp_control; +/* 0x0080 SAS_PCFG */ + u32 phy_configuration; +/* 0x0084 SAS_CLKSM */ + u32 clock_skew_management; +/* 0x0088 SAS_TXCOMWAKE */ + u32 transmit_comwake_signal; +/* 0x008C SAS_TXCOMINIT */ + u32 transmit_cominit_signal; +/* 0x0090 SAS_TXCOMSAS */ + u32 transmit_comsas_signal; +/* 0x0094 SAS_COMINIT */ + u32 cominit_control; +/* 0x0098 SAS_COMWAKE */ + u32 comwake_control; +/* 0x009C SAS_COMSAS */ + u32 comsas_control; +/* 0x00A0 SAS_SFERCNT */ + u32 received_short_frame_count; +/* 0x00A4 SAS_CDFERCNT */ + u32 received_frame_without_credit_count; +/* 0x00A8 SAS_DNFERCNT */ + u32 received_frame_after_done_count; +/* 0x00AC SAS_PRSTERCNT */ + u32 phy_reset_problem_count; +/* 0x00B0 SAS_CNTCTL */ + u32 counter_control; +/* 0x00B4 SAS_SSPTOV */ + u32 ssp_timer_timeout_values; +/* 0x00B8 FTCTL */ + u32 ftx_control; +/* 0x00BC FRCTL */ + u32 frx_control; +/* 0x00C0 FTWMRK */ + u32 ftx_watermark; +/* 0x00C4 ENSPINUP */ + u32 notify_enable_spinup_control; +/* 0x00C8 SAS_TRNTOV */ + u32 sas_training_sequence_timer_values; +/* 0x00CC SAS_PHYCAP */ + u32 phy_capabilities; +/* 0x00D0 SAS_PHYCTL */ + u32 phy_control; + u32 reserved_d4; +/* 0x00D8 LLCTL */ + u32 link_layer_control; +/* 0x00DC AFE_XCVRCR */ + u32 afe_xcvr_control; +/* 0x00E0 AFE_LUTCR */ + u32 afe_lookup_table_control; +/* 0x00E4 PSZGCR */ + u32 phy_source_zone_group_control; +/* 0x00E8 SAS_RECPHYCAP */ + u32 receive_phycap; + u32 reserved_ec; +/* 0x00F0 SNAFERXRSTCTL */ + u32 speed_negotiation_afe_rx_reset_control; +/* 0x00F4 SAS_SSIPMCTL */ + u32 power_management_control; +/* 0x00F8 SAS_PSPREQ_PRIM */ + u32 sas_pm_partial_request_primitive; +/* 0x00FC SAS_PSSREQ_PRIM */ + u32 sas_pm_slumber_request_primitive; +/* 0x0100 SAS_PPSACK_PRIM */ + u32 sas_pm_ack_primitive_register; +/* 0x0104 SAS_PSNAK_PRIM */ + u32 sas_pm_nak_primitive_register; +/* 0x0108 SAS_SSIPMTOV */ + u32 sas_primitive_timeout; + u32 reserved_10c; +/* 0x0110 - 0x011C PLAPRDCTRLxREG */ + u32 pla_product_control[4]; +/* 0x0120 PLAPRDSUMREG */ + u32 pla_product_sum; +/* 0x0124 PLACONTROLREG */ + u32 pla_control; +/* Remainder of memory space 896 bytes */ + u32 reserved_0128_037f[0x96]; + +}; + +/* + * 0x00D4 // Same offset as SAS_TCTSTM SAS_PTxC + * u32 primitive_transmit_control; */ + +/* + * ---------------------------------------------------------------------------- + * SGPIO + * ---------------------------------------------------------------------------- */ +#define SCU_SGPIO_OFFSET 0x1400 + +/* #define SCU_SGPIO_OFFSET 0x6000 // later moves to 0x1400 see HSD 652625 */ +#define SCU_SGPIO_SGICR_OFFSET 0x0000 +#define SCU_SGPIO_SGPBR_OFFSET 0x0004 +#define SCU_SGPIO_SGSDLR_OFFSET 0x0008 +#define SCU_SGPIO_SGSDUR_OFFSET 0x000C +#define SCU_SGPIO_SGSIDLR_OFFSET 0x0010 +#define SCU_SGPIO_SGSIDUR_OFFSET 0x0014 +#define SCU_SGPIO_SGVSCR_OFFSET 0x0018 +/* Address from 0x0820 to 0x083C */ +#define SCU_SGPIO_SGODSR_OFFSET 0x0020 + +/** + * struct scu_sgpio_registers - SCU SGPIO Registers + * + * + */ +struct scu_sgpio_registers { +/* 0x0000 SGPIO_SGICR */ + u32 interface_control; +/* 0x0004 SGPIO_SGPBR */ + u32 blink_rate; +/* 0x0008 SGPIO_SGSDLR */ + u32 start_drive_lower; +/* 0x000C SGPIO_SGSDUR */ + u32 start_drive_upper; +/* 0x0010 SGPIO_SGSIDLR */ + u32 serial_input_lower; +/* 0x0014 SGPIO_SGSIDUR */ + u32 serial_input_upper; +/* 0x0018 SGPIO_SGVSCR */ + u32 vendor_specific_code; +/* 0x0020 SGPIO_SGODSR */ + u32 ouput_data_select[8]; +/* Remainder of memory space 256 bytes */ + u32 reserved_1444_14ff[0x31]; + +}; + +/* + * ***************************************************************************** + * * Defines for VIIT entry offsets + * * Access additional entries by SCU_VIIT_BASE + index * 0x10 + * ***************************************************************************** */ +#define SCU_VIIT_BASE 0x1c00 + +struct SCU_VIIT_REGISTERS { + u32 registers[256]; +}; + +/* + * ***************************************************************************** + * * SCU PORT TASK SCHEDULER REGISTERS + * ***************************************************************************** */ + +#define SCU_PTSG_BASE 0x1000 + +#define SCU_PTSG_PTSGCR_OFFSET 0x0000 +#define SCU_PTSG_RTCR_OFFSET 0x0004 +#define SCU_PTSG_RTCCR_OFFSET 0x0008 +#define SCU_PTSG_PTS0CR_OFFSET 0x0010 +#define SCU_PTSG_PTS0SR_OFFSET 0x0014 +#define SCU_PTSG_PTS1CR_OFFSET 0x0018 +#define SCU_PTSG_PTS1SR_OFFSET 0x001C +#define SCU_PTSG_PTS2CR_OFFSET 0x0020 +#define SCU_PTSG_PTS2SR_OFFSET 0x0024 +#define SCU_PTSG_PTS3CR_OFFSET 0x0028 +#define SCU_PTSG_PTS3SR_OFFSET 0x002C +#define SCU_PTSG_PCSPE0CR_OFFSET 0x0030 +#define SCU_PTSG_PCSPE1CR_OFFSET 0x0034 +#define SCU_PTSG_PCSPE2CR_OFFSET 0x0038 +#define SCU_PTSG_PCSPE3CR_OFFSET 0x003C +#define SCU_PTSG_ETMTSCCR_OFFSET 0x0040 +#define SCU_PTSG_ETMRNSCCR_OFFSET 0x0044 + +/** + * struct scu_port_task_scheduler_registers - These are the control/stats pairs + * for each Port Task Scheduler. + * + * + */ +struct scu_port_task_scheduler_registers { + u32 control; + u32 status; +}; + +typedef u32 SCU_PORT_PE_CONFIGURATION_REGISTER_T; + +/** + * struct scu_port_task_scheduler_group_registers - These are the PORT Task + * Scheduler registers + * + * + */ +struct scu_port_task_scheduler_group_registers { +/* 0x0000 PTSGCR */ + u32 control; +/* 0x0004 RTCR */ + u32 real_time_clock; +/* 0x0008 RTCCR */ + u32 real_time_clock_control; +/* 0x000C */ + u32 reserved_0C; +/* + * 0x0010 PTS0CR + * 0x0014 PTS0SR + * 0x0018 PTS1CR + * 0x001C PTS1SR + * 0x0020 PTS2CR + * 0x0024 PTS2SR + * 0x0028 PTS3CR + * 0x002C PTS3SR */ + struct scu_port_task_scheduler_registers port[4]; +/* + * 0x0030 PCSPE0CR + * 0x0034 PCSPE1CR + * 0x0038 PCSPE2CR + * 0x003C PCSPE3CR */ + SCU_PORT_PE_CONFIGURATION_REGISTER_T protocol_engine[4]; +/* 0x0040 ETMTSCCR */ + u32 tc_scanning_interval_control; +/* 0x0044 ETMRNSCCR */ + u32 rnc_scanning_interval_control; +/* Remainder of memory space 128 bytes */ + u32 reserved_1048_107f[0x0E]; + +}; + +#define SCU_PTSG_SCUVZECR_OFFSET 0x003C + +/* + * ***************************************************************************** + * * AFE REGISTERS + * ***************************************************************************** */ +#define SCU_AFE_MMR_BASE 0xE000 + +/* + * AFE 0 is at offset 0x0800 + * AFE 1 is at offset 0x0900 + * AFE 2 is at offset 0x0a00 + * AFE 3 is at offset 0x0b00 */ +struct scu_afe_transceiver { + /* 0x0000 AFE_XCVR_CTRL0 */ + u32 afe_xcvr_control0; + /* 0x0004 AFE_XCVR_CTRL1 */ + u32 afe_xcvr_control1; + /* 0x0008 */ + u32 reserved_0008; + /* 0x000c afe_dfx_rx_control0 */ + u32 afe_dfx_rx_control0; + /* 0x0010 AFE_DFX_RX_CTRL1 */ + u32 afe_dfx_rx_control1; + /* 0x0014 */ + u32 reserved_0014; + /* 0x0018 AFE_DFX_RX_STS0 */ + u32 afe_dfx_rx_status0; + /* 0x001c AFE_DFX_RX_STS1 */ + u32 afe_dfx_rx_status1; + /* 0x0020 */ + u32 reserved_0020; + /* 0x0024 AFE_TX_CTRL */ + u32 afe_tx_control; + /* 0x0028 AFE_TX_AMP_CTRL0 */ + u32 afe_tx_amp_control0; + /* 0x002c AFE_TX_AMP_CTRL1 */ + u32 afe_tx_amp_control1; + /* 0x0030 AFE_TX_AMP_CTRL2 */ + u32 afe_tx_amp_control2; + /* 0x0034 AFE_TX_AMP_CTRL3 */ + u32 afe_tx_amp_control3; + /* 0x0038 afe_tx_ssc_control */ + u32 afe_tx_ssc_control; + /* 0x003c */ + u32 reserved_003c; + /* 0x0040 AFE_RX_SSC_CTRL0 */ + u32 afe_rx_ssc_control0; + /* 0x0044 AFE_RX_SSC_CTRL1 */ + u32 afe_rx_ssc_control1; + /* 0x0048 AFE_RX_SSC_CTRL2 */ + u32 afe_rx_ssc_control2; + /* 0x004c AFE_RX_EQ_STS0 */ + u32 afe_rx_eq_status0; + /* 0x0050 AFE_RX_EQ_STS1 */ + u32 afe_rx_eq_status1; + /* 0x0054 AFE_RX_CDR_STS */ + u32 afe_rx_cdr_status; + /* 0x0058 */ + u32 reserved_0058; + /* 0x005c AFE_CHAN_CTRL */ + u32 afe_channel_control; + /* 0x0060-0x006c */ + u32 reserved_0060_006c[0x04]; + /* 0x0070 AFE_XCVR_EC_STS0 */ + u32 afe_xcvr_error_capture_status0; + /* 0x0074 AFE_XCVR_EC_STS1 */ + u32 afe_xcvr_error_capture_status1; + /* 0x0078 AFE_XCVR_EC_STS2 */ + u32 afe_xcvr_error_capture_status2; + /* 0x007c afe_xcvr_ec_status3 */ + u32 afe_xcvr_error_capture_status3; + /* 0x0080 AFE_XCVR_EC_STS4 */ + u32 afe_xcvr_error_capture_status4; + /* 0x0084 AFE_XCVR_EC_STS5 */ + u32 afe_xcvr_error_capture_status5; + /* 0x0088-0x00fc */ + u32 reserved_008c_00fc[0x1e]; +}; + +/** + * struct scu_afe_registers - AFE Regsiters + * + * + */ +/* Uaoa AFE registers */ +struct scu_afe_registers { + /* 0Xe000 AFE_BIAS_CTRL */ + u32 afe_bias_control; + u32 reserved_0004; + /* 0x0008 AFE_PLL_CTRL0 */ + u32 afe_pll_control0; + /* 0x000c AFE_PLL_CTRL1 */ + u32 afe_pll_control1; + /* 0x0010 AFE_PLL_CTRL2 */ + u32 afe_pll_control2; + /* 0x0014 AFE_CB_STS */ + u32 afe_common_block_status; + /* 0x0018-0x007c */ + u32 reserved_18_7c[0x1a]; + /* 0x0080 AFE_PMSN_MCTRL0 */ + u32 afe_pmsn_master_control0; + /* 0x0084 AFE_PMSN_MCTRL1 */ + u32 afe_pmsn_master_control1; + /* 0x0088 AFE_PMSN_MCTRL2 */ + u32 afe_pmsn_master_control2; + /* 0x008C-0x00fc */ + u32 reserved_008c_00fc[0x1D]; + /* 0x0100 AFE_DFX_MST_CTRL0 */ + u32 afe_dfx_master_control0; + /* 0x0104 AFE_DFX_MST_CTRL1 */ + u32 afe_dfx_master_control1; + /* 0x0108 AFE_DFX_DCL_CTRL */ + u32 afe_dfx_dcl_control; + /* 0x010c AFE_DFX_DMON_CTRL */ + u32 afe_dfx_digital_monitor_control; + /* 0x0110 AFE_DFX_AMONP_CTRL */ + u32 afe_dfx_analog_p_monitor_control; + /* 0x0114 AFE_DFX_AMONN_CTRL */ + u32 afe_dfx_analog_n_monitor_control; + /* 0x0118 AFE_DFX_NTL_STS */ + u32 afe_dfx_ntl_status; + /* 0x011c AFE_DFX_FIFO_STS0 */ + u32 afe_dfx_fifo_status0; + /* 0x0120 AFE_DFX_FIFO_STS1 */ + u32 afe_dfx_fifo_status1; + /* 0x0124 AFE_DFX_MPAT_CTRL */ + u32 afe_dfx_master_pattern_control; + /* 0x0128 AFE_DFX_P0_CTRL */ + u32 afe_dfx_p0_control; + /* 0x012c-0x01a8 AFE_DFX_P0_DRx */ + u32 afe_dfx_p0_data[32]; + /* 0x01ac */ + u32 reserved_01ac; + /* 0x01b0-0x020c AFE_DFX_P0_IRx */ + u32 afe_dfx_p0_instruction[24]; + /* 0x0210 */ + u32 reserved_0210; + /* 0x0214 AFE_DFX_P1_CTRL */ + u32 afe_dfx_p1_control; + /* 0x0218-0x245 AFE_DFX_P1_DRx */ + u32 afe_dfx_p1_data[16]; + /* 0x0258-0x029c */ + u32 reserved_0258_029c[0x12]; + /* 0x02a0-0x02bc AFE_DFX_P1_IRx */ + u32 afe_dfx_p1_instruction[8]; + /* 0x02c0-0x2fc */ + u32 reserved_02c0_02fc[0x10]; + /* 0x0300 AFE_DFX_TX_PMSN_CTRL */ + u32 afe_dfx_tx_pmsn_control; + /* 0x0304 AFE_DFX_RX_PMSN_CTRL */ + u32 afe_dfx_rx_pmsn_control; + u32 reserved_0308; + /* 0x030c AFE_DFX_NOA_CTRL0 */ + u32 afe_dfx_noa_control0; + /* 0x0310 AFE_DFX_NOA_CTRL1 */ + u32 afe_dfx_noa_control1; + /* 0x0314 AFE_DFX_NOA_CTRL2 */ + u32 afe_dfx_noa_control2; + /* 0x0318 AFE_DFX_NOA_CTRL3 */ + u32 afe_dfx_noa_control3; + /* 0x031c AFE_DFX_NOA_CTRL4 */ + u32 afe_dfx_noa_control4; + /* 0x0320 AFE_DFX_NOA_CTRL5 */ + u32 afe_dfx_noa_control5; + /* 0x0324 AFE_DFX_NOA_CTRL6 */ + u32 afe_dfx_noa_control6; + /* 0x0328 AFE_DFX_NOA_CTRL7 */ + u32 afe_dfx_noa_control7; + /* 0x032c-0x07fc */ + u32 reserved_032c_07fc[0x135]; + + /* 0x0800-0x0bfc */ + struct scu_afe_transceiver scu_afe_xcvr[4]; + + /* 0x0c00-0x0ffc */ + u32 reserved_0c00_0ffc[0x0100]; +}; + +struct SCU_PROTOCOL_ENGINE_GROUP_REGISTERS { + u32 table[0xE0]; +}; + + +struct SCU_VIIT_IIT { + u32 table[256]; +}; + +/** + * Placeholder for the ZONE Partition Table information ZONING will not be + * included in the 1.1 release. + * + * + */ +struct SCU_ZONE_PARTITION_TABLE { + u32 table[2048]; +}; + +/** + * Placeholder for the CRAM register since I am not sure if we need to + * read/write to these registers as yet. + * + * + */ +struct SCU_COMPLETION_RAM { + u32 ram[128]; +}; + +/** + * Placeholder for the FBRAM registers since I am not sure if we need to + * read/write to these registers as yet. + * + * + */ +struct SCU_FRAME_BUFFER_RAM { + u32 ram[128]; +}; + +#define SCU_SCRATCH_RAM_SIZE_IN_DWORDS 256 + +/** + * Placeholder for the scratch RAM registers. + * + * + */ +struct SCU_SCRATCH_RAM { + u32 ram[SCU_SCRATCH_RAM_SIZE_IN_DWORDS]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct NOA_PROTOCOL_ENGINE_PARTITION { + u32 reserved[64]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct NOA_HUB_PARTITION { + u32 reserved[64]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct NOA_HOST_INTERFACE_PARTITION { + u32 reserved[64]; +}; + +/** + * struct TRANSPORT_LINK_LAYER_PAIR - The SCU Hardware pairs up the TL + * registers with the LL registers so we must place them adjcent to make the + * array of registers in the PEG. + * + * + */ +struct TRANSPORT_LINK_LAYER_PAIR { + struct scu_transport_layer_registers tl; + struct scu_link_layer_registers ll; +}; + +/** + * struct SCU_PEG_REGISTERS - SCU Protocol Engine Memory mapped register space. + * These registers are unique to each protocol engine group. There can be + * at most two PEG for a single SCU part. + * + * + */ +struct SCU_PEG_REGISTERS { + struct TRANSPORT_LINK_LAYER_PAIR pe[4]; + struct scu_port_task_scheduler_group_registers ptsg; + struct SCU_PROTOCOL_ENGINE_GROUP_REGISTERS peg; + struct scu_sgpio_registers sgpio; + u32 reserved_01500_1BFF[0x1C0]; + struct scu_viit_entry viit[64]; + struct SCU_ZONE_PARTITION_TABLE zpt0; + struct SCU_ZONE_PARTITION_TABLE zpt1; +}; + +/** + * struct scu_registers - SCU regsiters including both PEG registers if we turn + * on that compile option. All of these registers are in the memory mapped + * space returned from BAR1. + * + * + */ +struct scu_registers { + /* 0x0000 - PEG 0 */ + struct SCU_PEG_REGISTERS peg0; + + /* 0x6000 - SDMA and Miscellaneous */ + struct scu_sdma_registers sdma; + struct SCU_COMPLETION_RAM cram; + struct SCU_FRAME_BUFFER_RAM fbram; + u32 reserved_6800_69FF[0x80]; + struct NOA_PROTOCOL_ENGINE_PARTITION noa_pe; + struct NOA_HUB_PARTITION noa_hub; + struct NOA_HOST_INTERFACE_PARTITION noa_if; + u32 reserved_6d00_7fff[0x4c0]; + + /* 0x8000 - PEG 1 */ + struct SCU_PEG_REGISTERS peg1; + + /* 0xE000 - AFE Registers */ + struct scu_afe_registers afe; + + /* 0xF000 - reserved */ + u32 reserved_f000_211fff[0x80c00]; + + /* 0x212000 - scratch RAM */ + struct SCU_SCRATCH_RAM scratch_ram; + +}; + + +#endif /* _SCU_REGISTERS_HEADER_ */ diff --git a/drivers/scsi/isci/core/scu_remote_node_context.h b/drivers/scsi/isci/core/scu_remote_node_context.h new file mode 100644 index 0000000..8006f2e --- /dev/null +++ b/drivers/scsi/isci/core/scu_remote_node_context.h @@ -0,0 +1,230 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_REMOTE_NODE_CONTEXT_HEADER__ +#define __SCU_REMOTE_NODE_CONTEXT_HEADER__ + +/** + * This file contains the structures and constatns used by the SCU hardware to + * describe a remote node context. + * + * + */ +#include "sci_types.h" + +/** + * struct ssp_remote_node_context - This structure contains the SCU hardware + * definition for an SSP remote node. + * + * + */ +struct ssp_remote_node_context { + /* WORD 0 */ + + /** + * This field is the remote node index assigned for this remote node. All + * remote nodes must have a unique remote node index. The value of the remote + * node index can not exceed the maximum number of remote nodes reported in + * the SCU device context capacity register. + */ + u32 remote_node_index:12; + u32 reserved0_1:4; + + /** + * This field tells the SCU hardware how many simultaneous connections that + * this remote node will support. + */ + u32 remote_node_port_width:4; + + /** + * This field tells the SCU hardware which logical port to associate with this + * remote node. + */ + u32 logical_port_index:3; + u32 reserved0_2:5; + + /** + * This field will enable the I_T nexus loss timer for this remote node. + */ + u32 nexus_loss_timer_enable:1; + + /** + * This field is the for driver debug only and is not used. + */ + u32 check_bit:1; + + /** + * This field must be set to true when the hardware DMAs the remote node + * context to the hardware SRAM. When the remote node is being invalidated + * this field must be set to false. + */ + u32 is_valid:1; + + /** + * This field must be set to true. + */ + u32 is_remote_node_context:1; + + /* WORD 1 - 2 */ + + /** + * This is the low word of the remote device SAS Address + */ + u32 remote_sas_address_lo; + + /** + * This field is the high word of the remote device SAS Address + */ + u32 remote_sas_address_hi; + + /* WORD 3 */ + /** + * This field reprensets the function number assigned to this remote device. + * This value must match the virtual function number that is being used to + * communicate to the device. + */ + u32 function_number:8; + u32 reserved3_1:8; + + /** + * This field provides the driver a way to cheat on the arbitration wait time + * for this remote node. + */ + u32 arbitration_wait_time:16; + + /* WORD 4 */ + /** + * This field tells the SCU hardware how long this device may occupy the + * connection before it must be closed. + */ + u32 connection_occupancy_timeout:16; + + /** + * This field tells the SCU hardware how long to maintain a connection when + * there are no frames being transmitted on the link. + */ + u32 connection_inactivity_timeout:16; + + /* WORD 5 */ + /** + * This field allows the driver to cheat on the arbitration wait time for this + * remote node. + */ + u32 initial_arbitration_wait_time:16; + + /** + * This field is tells the hardware what to program for the connection rate in + * the open address frame. See the SAS spec for valid values. + */ + u32 oaf_connection_rate:4; + + /** + * This field tells the SCU hardware what to program for the features in the + * open address frame. See the SAS spec for valid values. + */ + u32 oaf_features:4; + + /** + * This field tells the SCU hardware what to use for the source zone group in + * the open address frame. See the SAS spec for more details on zoning. + */ + u32 oaf_source_zone_group:8; + + /* WORD 6 */ + /** + * This field tells the SCU hardware what to use as the more capibilities in + * the open address frame. See the SAS Spec for details. + */ + u32 oaf_more_compatibility_features; + + /* WORD 7 */ + u32 reserved7; + +}; + +/** + * struct stp_remote_node_context - This structure contains the SCU hardware + * definition for a STP remote node. + * + * STP Targets are not yet supported so this definition is a placeholder until + * we do support them. + */ +struct stp_remote_node_context { + /** + * Placeholder data for the STP remote node. + */ + u32 data[8]; + +}; + +/** + * This union combines the SAS and SATA remote node definitions. + * + * union scu_remote_node_context + */ +union scu_remote_node_context { + /** + * SSP Remote Node + */ + struct ssp_remote_node_context ssp; + + /** + * STP Remote Node + */ + struct stp_remote_node_context stp; + +}; + +#endif /* __SCU_REMOTE_NODE_CONTEXT_HEADER__ */ diff --git a/drivers/scsi/isci/core/scu_task_context.h b/drivers/scsi/isci/core/scu_task_context.h new file mode 100644 index 0000000..d08c51b --- /dev/null +++ b/drivers/scsi/isci/core/scu_task_context.h @@ -0,0 +1,943 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_TASK_CONTEXT_H_ +#define _SCU_TASK_CONTEXT_H_ + +/** + * This file contains the structures and constants for the SCU hardware task + * context. + * + * + */ + +#include "sci_types.h" + +/** + * enum SCU_SSP_TASK_TYPE - This enumberation defines the various SSP task + * types the SCU hardware will accept. The definition for the various task + * types the SCU hardware will accept can be found in the DS specification. + * + * + */ +typedef enum { + SCU_TASK_TYPE_IOREAD, /* /< IO READ direction or no direction */ + SCU_TASK_TYPE_IOWRITE, /* /< IO Write direction */ + SCU_TASK_TYPE_SMP_REQUEST, /* /< SMP Request type */ + SCU_TASK_TYPE_RESPONSE, /* /< Driver generated response frame (targt mode) */ + SCU_TASK_TYPE_RAW_FRAME, /* /< Raw frame request type */ + SCU_TASK_TYPE_PRIMITIVE /* /< Request for a primitive to be transmitted */ +} SCU_SSP_TASK_TYPE; + +/** + * enum SCU_SATA_TASK_TYPE - This enumeration defines the various SATA task + * types the SCU hardware will accept. The definition for the various task + * types the SCU hardware will accept can be found in the DS specification. + * + * + */ +typedef enum { + SCU_TASK_TYPE_DMA_IN, /* /< Read request */ + SCU_TASK_TYPE_FPDMAQ_READ, /* /< NCQ read request */ + SCU_TASK_TYPE_PACKET_DMA_IN, /* /< Packet read request */ + SCU_TASK_TYPE_SATA_RAW_FRAME, /* /< Raw frame request */ + RESERVED_4, + RESERVED_5, + RESERVED_6, + RESERVED_7, + SCU_TASK_TYPE_DMA_OUT, /* /< Write request */ + SCU_TASK_TYPE_FPDMAQ_WRITE, /* /< NCQ write Request */ + SCU_TASK_TYPE_PACKET_DMA_OUT /* /< Packet write request */ +} SCU_SATA_TASK_TYPE; + + +/** + * + * + * SCU_CONTEXT_TYPE + */ +#define SCU_TASK_CONTEXT_TYPE 0 +#define SCU_RNC_CONTEXT_TYPE 1 + +/** + * + * + * SCU_TASK_CONTEXT_VALIDITY + */ +#define SCU_TASK_CONTEXT_INVALID 0 +#define SCU_TASK_CONTEXT_VALID 1 + +/** + * + * + * SCU_COMMAND_CODE + */ +#define SCU_COMMAND_CODE_INITIATOR_NEW_TASK 0 +#define SCU_COMMAND_CODE_ACTIVE_TASK 1 +#define SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK 2 +#define SCU_COMMAND_CODE_TARGET_RAW_FRAMES 3 + +/** + * + * + * SCU_TASK_PRIORITY + */ +/** + * + * + * This priority is used when there is no priority request for this request. + */ +#define SCU_TASK_PRIORITY_NORMAL 0 + +/** + * + * + * This priority indicates that the task should be scheduled to the head of the + * queue. The task will NOT be executed if the TX is suspended for the remote + * node. + */ +#define SCU_TASK_PRIORITY_HEAD_OF_Q 1 + +/** + * + * + * This priority indicates that the task will be executed before all + * SCU_TASK_PRIORITY_NORMAL and SCU_TASK_PRIORITY_HEAD_OF_Q tasks. The task + * WILL be executed if the TX is suspended for the remote node. + */ +#define SCU_TASK_PRIORITY_HIGH 2 + +/** + * + * + * This task priority is reserved and should not be used. + */ +#define SCU_TASK_PRIORITY_RESERVED 3 + +#define SCU_TASK_INITIATOR_MODE 1 +#define SCU_TASK_TARGET_MODE 0 + +#define SCU_TASK_REGULAR 0 +#define SCU_TASK_ABORTED 1 + +/* direction bit defintion */ +/** + * + * + * SATA_DIRECTION + */ +#define SCU_SATA_WRITE_DATA_DIRECTION 0 +#define SCU_SATA_READ_DATA_DIRECTION 1 + +/** + * + * + * SCU_COMMAND_CONTEXT_MACROS These macros provide the mask and shift + * operations to construct the various SCU commands + */ +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT 21 +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK 0x00E00000 +#define scu_get_command_request_type(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK) + +#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT 18 +#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK 0x001C0000 +#define scu_get_command_request_subtype(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK) + +#define SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK \ + (\ + SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK \ + | SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK \ + ) +#define scu_get_command_request_full_type(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK) + +#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 16 +#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK 0x00010000 +#define scu_get_command_protocl_engine_group(x) \ + ((x) & SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK) + +#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 12 +#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK 0x00007000 +#define scu_get_command_reqeust_logical_port(x) \ + ((x) & SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK) + + +#define MAKE_SCU_CONTEXT_COMMAND_TYPE(type) \ + ((u32)(type) << SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT) + +/** + * MAKE_SCU_CONTEXT_COMMAND_TYPE() - + * + * SCU_COMMAND_TYPES These constants provide the grouping of the different SCU + * command types. + */ +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(0) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(1) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(2) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(3) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(6) + +#define MAKE_SCU_CONTEXT_COMMAND_REQUEST(type, command) \ + ((type) | ((command) << SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT)) + +/** + * + * + * SCU_REQUEST_TYPES These constants are the various request types that can be + * posted to the SCU hardware. + */ +#define SCU_CONTEXT_COMMAND_REQUST_POST_TC \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 0)) + +#define SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 1)) + +#define SCU_CONTEXT_COMMAND_REQUST_DUMP_TC \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_32 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_96 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 2)) + +#define SCU_CONTEXT_COMMAND_DUMP_RNC_32 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_DUMP_RNC_96 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_RESUME \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 2)) + +#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_ENABLE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 3)) + +#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_DISABLE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 4)) + +/** + * + * + * SCU_TASK_CONTEXT_PROTOCOL SCU Task context protocol types this is uesd to + * program the SCU Task context protocol field in word 0x00. + */ +#define SCU_TASK_CONTEXT_PROTOCOL_SMP 0x00 +#define SCU_TASK_CONTEXT_PROTOCOL_SSP 0x01 +#define SCU_TASK_CONTEXT_PROTOCOL_STP 0x02 +#define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07 + +/** + * struct SSP_TASK_CONTEXT - This is the SCU hardware definition for an SSP + * request. + * + * + */ +struct SSP_TASK_CONTEXT { + /* OFFSET 0x18 */ + u32 reserved00:24; + u32 frame_type:8; + + /* OFFSET 0x1C */ + u32 reserved01; + + /* OFFSET 0x20 */ + u32 fill_bytes:2; + u32 reserved02:6; + u32 changing_data_pointer:1; + u32 retransmit:1; + u32 retry_data_frame:1; + u32 tlr_control:2; + u32 reserved03:19; + + /* OFFSET 0x24 */ + u32 uiRsvd4; + + /* OFFSET 0x28 */ + u32 target_port_transfer_tag:16; + u32 tag:16; + + /* OFFSET 0x2C */ + u32 data_offset; +}; + +/** + * struct STP_TASK_CONTEXT - This is the SCU hardware definition for an STP + * request. + * + * + */ +struct STP_TASK_CONTEXT { + /* OFFSET 0x18 */ + u32 fis_type:8; + u32 pm_port:4; + u32 reserved0:3; + u32 control:1; + u32 command:8; + u32 features:8; + + /* OFFSET 0x1C */ + u32 reserved1; + + /* OFFSET 0x20 */ + u32 reserved2; + + /* OFFSET 0x24 */ + u32 reserved3; + + /* OFFSET 0x28 */ + u32 ncq_tag:5; + u32 reserved4:27; + + /* OFFSET 0x2C */ + u32 data_offset; /* TODO: What is this used for? */ +}; + +/** + * struct SMP_TASK_CONTEXT - This is the SCU hardware definition for an SMP + * request. + * + * + */ +struct SMP_TASK_CONTEXT { + /* OFFSET 0x18 */ + u32 response_length:8; + u32 function_result:8; + u32 function:8; + u32 frame_type:8; + + /* OFFSET 0x1C */ + u32 smp_response_ufi:12; + u32 reserved1:20; + + /* OFFSET 0x20 */ + u32 reserved2; + + /* OFFSET 0x24 */ + u32 reserved3; + + /* OFFSET 0x28 */ + u32 reserved4; + + /* OFFSET 0x2C */ + u32 reserved5; +}; + +/** + * struct PRIMITIVE_TASK_CONTEXT - This is the SCU hardware definition used + * when the driver wants to send a primitive on the link. + * + * + */ +struct PRIMITIVE_TASK_CONTEXT { + /* OFFSET 0x18 */ + /** + * This field is the control word and it must be 0. + */ + u32 control; /* /< must be set to 0 */ + + /* OFFSET 0x1C */ + /** + * This field specifies the primitive that is to be transmitted. + */ + u32 sequence; + + /* OFFSET 0x20 */ + u32 reserved0; + + /* OFFSET 0x24 */ + u32 reserved1; + + /* OFFSET 0x28 */ + u32 reserved2; + + /* OFFSET 0x2C */ + u32 reserved3; +}; + +/** + * The union of the protocols that can be selected in the SCU task context + * field. + * + * PROTOCOL_CONTEXT + */ +union PROTOCOL_CONTEXT { + struct SSP_TASK_CONTEXT ssp; + struct STP_TASK_CONTEXT stp; + struct SMP_TASK_CONTEXT smp; + struct PRIMITIVE_TASK_CONTEXT primitive; + u32 words[6]; +}; + +/** + * struct scu_sgl_element - This structure represents a single SCU defined SGL + * element. SCU SGLs contain a 64 bit address with the maximum data transfer + * being 24 bits in size. The SGL can not cross a 4GB boundary. + * + * struct scu_sgl_element + */ +struct scu_sgl_element { + /** + * This field is the upper 32 bits of the 64 bit physical address. + */ + u32 address_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address. + */ + u32 address_lower; + + /** + * This field is the number of bytes to transfer. + */ + u32 length:24; + + /** + * This field is the address modifier to be used when a virtual function is + * requesting a data transfer. + */ + u32 address_modifier:8; + +}; + +#define SCU_SGL_ELEMENT_PAIR_A 0 +#define SCU_SGL_ELEMENT_PAIR_B 1 + +/** + * struct scu_sgl_element_pair - This structure is the SCU hardware definition + * of a pair of SGL elements. The SCU hardware always works on SGL pairs. + * They are refered to in the DS specification as SGL A and SGL B. Each SGL + * pair is followed by the address of the next pair. + * + * + */ +struct scu_sgl_element_pair { + /* OFFSET 0x60-0x68 */ + /** + * This field is the SGL element A of the SGL pair. + */ + struct scu_sgl_element A; + + /* OFFSET 0x6C-0x74 */ + /** + * This field is the SGL element B of the SGL pair. + */ + struct scu_sgl_element B; + + /* OFFSET 0x78-0x7C */ + /** + * This field is the upper 32 bits of the 64 bit address to the next SGL + * element pair. + */ + u32 next_pair_upper; + + /** + * This field is the lower 32 bits of the 64 bit address to the next SGL + * element pair. + */ + u32 next_pair_lower; + +}; + +/** + * struct TRANSPORT_SNAPSHOT - This structure is the SCU hardware scratch area + * for the task context. This is set to 0 by the driver but can be read by + * issuing a dump TC request to the SCU. + * + * + */ +struct TRANSPORT_SNAPSHOT { + /* OFFSET 0x48 */ + u32 xfer_rdy_write_data_length; + + /* OFFSET 0x4C */ + u32 data_offset; + + /* OFFSET 0x50 */ + u32 data_transfer_size:24; + u32 reserved_50_0:8; + + /* OFFSET 0x54 */ + u32 next_initiator_write_data_offset; + + /* OFFSET 0x58 */ + u32 next_initiator_write_data_xfer_size:24; + u32 reserved_58_0:8; +}; + +/** + * struct scu_task_context - This structure defines the contents of the SCU + * silicon task context. It lays out all of the fields according to the + * expected order and location for the Storage Controller unit. + * + * + */ +struct scu_task_context { + /* OFFSET 0x00 ------ */ + /** + * This field must be encoded to one of the valid SCU task priority values + * - SCU_TASK_PRIORITY_NORMAL + * - SCU_TASK_PRIORITY_HEAD_OF_Q + * - SCU_TASK_PRIORITY_HIGH + */ + u32 priority:2; + + /** + * This field must be set to true if this is an initiator generated request. + * Until target mode is supported all task requests are initiator requests. + */ + u32 initiator_request:1; + + /** + * This field must be set to one of the valid connection rates valid values + * are 0x8, 0x9, and 0xA. + */ + u32 connection_rate:4; + + /** + * This field muse be programed when generating an SMP response since the SMP + * connection remains open until the SMP response is generated. + */ + u32 protocol_engine_index:3; + + /** + * This field must contain the logical port for the task request. + */ + u32 logical_port_index:3; + + /** + * This field must be set to one of the SCU_TASK_CONTEXT_PROTOCOL values + * - SCU_TASK_CONTEXT_PROTOCOL_SMP + * - SCU_TASK_CONTEXT_PROTOCOL_SSP + * - SCU_TASK_CONTEXT_PROTOCOL_STP + * - SCU_TASK_CONTEXT_PROTOCOL_NONE + */ + u32 protocol_type:3; + + /** + * This filed must be set to the TCi allocated for this task + */ + u32 task_index:12; + + /** + * This field is reserved and must be set to 0x00 + */ + u32 reserved_00_0:1; + + /** + * For a normal task request this must be set to 0. If this is an abort of + * this task request it must be set to 1. + */ + u32 abort:1; + + /** + * This field must be set to true for the SCU hardware to process the task. + */ + u32 valid:1; + + /** + * This field must be set to SCU_TASK_CONTEXT_TYPE + */ + u32 context_type:1; + + /* OFFSET 0x04 */ + /** + * This field contains the RNi that is the target of this request. + */ + u32 remote_node_index:12; + + /** + * This field is programmed if this is a mirrored request, which we are not + * using, in which case it is the RNi for the mirrored target. + */ + u32 mirrored_node_index:12; + + /** + * This field is programmed with the direction of the SATA reqeust + * - SCU_SATA_WRITE_DATA_DIRECTION + * - SCU_SATA_READ_DATA_DIRECTION + */ + u32 sata_direction:1; + + /** + * This field is programmsed with one of the following SCU_COMMAND_CODE + * - SCU_COMMAND_CODE_INITIATOR_NEW_TASK + * - SCU_COMMAND_CODE_ACTIVE_TASK + * - SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK + * - SCU_COMMAND_CODE_TARGET_RAW_FRAMES + */ + u32 command_code:2; + + /** + * This field is set to true if the remote node should be suspended. + * This bit is only valid for SSP & SMP target devices. + */ + u32 suspend_node:1; + + /** + * This field is programmed with one of the following command type codes + * + * For SAS requests use the SCU_SSP_TASK_TYPE + * - SCU_TASK_TYPE_IOREAD + * - SCU_TASK_TYPE_IOWRITE + * - SCU_TASK_TYPE_SMP_REQUEST + * - SCU_TASK_TYPE_RESPONSE + * - SCU_TASK_TYPE_RAW_FRAME + * - SCU_TASK_TYPE_PRIMITIVE + * + * For SATA requests use the SCU_SATA_TASK_TYPE + * - SCU_TASK_TYPE_DMA_IN + * - SCU_TASK_TYPE_FPDMAQ_READ + * - SCU_TASK_TYPE_PACKET_DMA_IN + * - SCU_TASK_TYPE_SATA_RAW_FRAME + * - SCU_TASK_TYPE_DMA_OUT + * - SCU_TASK_TYPE_FPDMAQ_WRITE + * - SCU_TASK_TYPE_PACKET_DMA_OUT + */ + u32 task_type:4; + + /* OFFSET 0x08 */ + /** + * This field is reserved and the must be set to 0x00 + */ + u32 link_layer_control:8; /* presently all reserved */ + + /** + * This field is set to true when TLR is to be enabled + */ + u32 ssp_tlr_enable:1; + + /** + * This is field specifies if the SCU DMAs a response frame to host + * memory for good response frames when operating in target mode. + */ + u32 dma_ssp_target_good_response:1; + + /** + * This field indicates if the SCU should DMA the response frame to + * host memory. + */ + u32 do_not_dma_ssp_good_response:1; + + /** + * This field is set to true when strict ordering is to be enabled + */ + u32 strict_ordering:1; + + /** + * This field indicates the type of endianess to be utilized for the + * frame. command, task, and response frames utilized control_frame + * set to 1. + */ + u32 control_frame:1; + + /** + * This field is reserved and the driver should set to 0x00 + */ + u32 tl_control_reserved:3; + + /** + * This field is set to true when the SCU hardware task timeout control is to + * be enabled + */ + u32 timeout_enable:1; + + /** + * This field is reserved and the driver should set it to 0x00 + */ + u32 pts_control_reserved:7; + + /** + * This field should be set to true when block guard is to be enabled + */ + u32 block_guard_enable:1; + + /** + * This field is reserved and the driver should set to 0x00 + */ + u32 sdma_control_reserved:7; + + /* OFFSET 0x0C */ + /** + * This field is the address modifier for this io request it should be + * programmed with the virtual function that is making the request. + */ + u32 address_modifier:16; + + /** + * @todo What we support mirrored SMP response frame? + */ + u32 mirrored_protocol_engine:3; /* mirrored protocol Engine Index */ + + /** + * If this is a mirrored request the logical port index for the mirrored RNi + * must be programmed. + */ + u32 mirrored_logical_port:4; /* mirrored local port index */ + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_0C_0:8; + + /** + * This field must be set to true if the mirrored request processing is to be + * enabled. + */ + u32 mirror_request_enable:1; /* Mirrored request Enable */ + + /* OFFSET 0x10 */ + /** + * This field is the command iu length in dwords + */ + u32 ssp_command_iu_length:8; + + /** + * This is the target TLR enable bit it must be set to 0 when creatning the + * task context. + */ + u32 xfer_ready_tlr_enable:1; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_10_0:7; + + /** + * This is the maximum burst size that the SCU hardware will send in one + * connection its value is (N x 512) and N must be a multiple of 2. If the + * value is 0x00 then maximum burst size is disabled. + */ + u32 ssp_max_burst_size:16; + + /* OFFSET 0x14 */ + /** + * This filed is set to the number of bytes to be transfered in the request. + */ + u32 transfer_length_bytes:24; /* In terms of bytes */ + + /** + * This field is reserved and the driver should set it to 0x00 + */ + u32 reserved_14_0:8; + + /* OFFSET 0x18-0x2C */ + /** + * This union provides for the protocol specif part of the SCU Task Context. + */ + union PROTOCOL_CONTEXT type; + + /* OFFSET 0x30-0x34 */ + /** + * This field is the upper 32 bits of the 64 bit physical address of the + * command iu buffer + */ + u32 command_iu_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address of the + * command iu buffer + */ + u32 command_iu_lower; + + /* OFFSET 0x38-0x3C */ + /** + * This field is the upper 32 bits of the 64 bit physical address of the + * response iu buffer + */ + u32 response_iu_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address of the + * response iu buffer + */ + u32 response_iu_lower; + + /* OFFSET 0x40 */ + /** + * This field is set to the task phase of the SCU hardware. The driver must + * set this to 0x01 + */ + u32 task_phase:8; + + /** + * This field is set to the transport layer task status. The driver must set + * this to 0x00 + */ + u32 task_status:8; + + /** + * This field is used during initiator write TLR + */ + u32 previous_extended_tag:4; + + /** + * This field is set the maximum number of retries for a STP non-data FIS + */ + u32 stp_retry_count:2; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_40_1:2; + + /** + * This field is used by the SCU TL to determine when to take a snapshot when + * tranmitting read data frames. + * - 0x00 The entire IO + * - 0x01 32k + * - 0x02 64k + * - 0x04 128k + * - 0x08 256k + */ + u32 ssp_tlr_threshold:4; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_40_2:4; + + /* OFFSET 0x44 */ + u32 write_data_length; /* read only set to 0 */ + + /* OFFSET 0x48-0x58 */ + struct TRANSPORT_SNAPSHOT snapshot; /* read only set to 0 */ + + /* OFFSET 0x5C */ + u32 block_protection_enable:1; + u32 block_size:2; + u32 block_protection_function:2; + u32 reserved_5C_0:9; + u32 active_sgl_element:2; /* read only set to 0 */ + u32 sgl_exhausted:1; /* read only set to 0 */ + u32 payload_data_transfer_error:4; /* read only set to 0 */ + u32 frame_buffer_offset:11; /* read only set to 0 */ + + /* OFFSET 0x60-0x7C */ + /** + * This field is the first SGL element pair found in the TC data structure. + */ + struct scu_sgl_element_pair sgl_pair_ab; + /* OFFSET 0x80-0x9C */ + /** + * This field is the second SGL element pair found in the TC data structure. + */ + struct scu_sgl_element_pair sgl_pair_cd; + + /* OFFSET 0xA0-BC */ + struct scu_sgl_element_pair sgl_snapshot_ac; + + /* OFFSET 0xC0 */ + u32 active_sgl_element_pair; /* read only set to 0 */ + + /* OFFSET 0xC4-0xCC */ + u32 reserved_C4_CC[3]; + + /* OFFSET 0xD0 */ + u32 intermediate_crc_value:16; + u32 initial_crc_seed:16; + + /* OFFSET 0xD4 */ + u32 application_tag_for_verify:16; + u32 application_tag_for_generate:16; + + /* OFFSET 0xD8 */ + u32 reference_tag_seed_for_verify_function; + + /* OFFSET 0xDC */ + u32 reserved_DC; + + /* OFFSET 0xE0 */ + u32 reserved_E0_0:16; + u32 application_tag_mask_for_generate:16; + + /* OFFSET 0xE4 */ + u32 block_protection_control:16; + u32 application_tag_mask_for_verify:16; + + /* OFFSET 0xE8 */ + u32 block_protection_error:8; + u32 reserved_E8_0:24; + + /* OFFSET 0xEC */ + u32 reference_tag_seed_for_verify; + + /* OFFSET 0xF0 */ + u32 intermediate_crc_valid_snapshot:16; + u32 reserved_F0_0:16; + + /* OFFSET 0xF4 */ + u32 reference_tag_seed_for_verify_function_snapshot; + + /* OFFSET 0xF8 */ + u32 snapshot_of_reserved_dword_DC_of_tc; + + /* OFFSET 0xFC */ + u32 reference_tag_seed_for_generate_function_snapshot; + +}; + +#endif /* _SCU_TASK_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/core/scu_unsolicited_frame.h b/drivers/scsi/isci/core/scu_unsolicited_frame.h new file mode 100644 index 0000000..590ea02 --- /dev/null +++ b/drivers/scsi/isci/core/scu_unsolicited_frame.h @@ -0,0 +1,117 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This field defines the SCU format of an unsolicited frame (UF). A UF is a + * frame received by the SCU for which there is no known corresponding task + * context (TC). + * + * + */ + +#ifndef _SCU_UNSOLICITED_FRAME_H_ +#define _SCU_UNSOLICITED_FRAME_H_ + +#include "sci_types.h" + +/** + * + * + * This constant defines the number of DWORDS found the unsolicited frame + * header data member. + */ +#define SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS 15 + +/** + * struct scu_unsolicited_frame_header - + * + * This structure delineates the format of an unsolicited frame header. The + * first DWORD are UF attributes defined by the silicon architecture. The data + * depicts actual header information received on the link. + */ +struct scu_unsolicited_frame_header { + /** + * This field indicates if there is an Initiator Index Table entry with + * which this header is associated. + */ + u32 iit_exists:1; + + /** + * This field simply indicates the protocol type (i.e. SSP, STP, SMP). + */ + u32 protocol_type:3; + + /** + * This field indicates if the frame is an address frame (IAF or OAF) + * or if it is a information unit frame. + */ + u32 is_address_frame:1; + + /** + * This field simply indicates the connection rate at which the frame + * was received. + */ + u32 connection_rate:4; + + u32 reserved:23; + + /** + * This field represents the actual header data received on the link. + */ + u32 data[SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS]; + +}; + +#endif /* _SCU_UNSOLICITED_FRAME_H_ */ diff --git a/drivers/scsi/isci/core/scu_viit_data.h b/drivers/scsi/isci/core/scu_viit_data.h new file mode 100644 index 0000000..4601d19 --- /dev/null +++ b/drivers/scsi/isci/core/scu_viit_data.h @@ -0,0 +1,179 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_VIIT_DATA_HEADER_ +#define _SCU_VIIT_DATA_HEADER_ + +/** + * This file contains the constants and structures for the SCU hardware VIIT + * table entries. + * + * + */ + +#include "sci_types.h" + +#define SCU_VIIT_ENTRY_ID_MASK (0xC0000000) +#define SCU_VIIT_ENTRY_ID_SHIFT (30) + +#define SCU_VIIT_ENTRY_FUNCTION_MASK (0x0FF00000) +#define SCU_VIIT_ENTRY_FUNCTION_SHIFT (20) + +#define SCU_VIIT_ENTRY_IPPTMODE_MASK (0x0001F800) +#define SCU_VIIT_ENTRY_IPPTMODE_SHIFT (12) + +#define SCU_VIIT_ENTRY_LPVIE_MASK (0x00000F00) +#define SCU_VIIT_ENTRY_LPVIE_SHIFT (8) + +#define SCU_VIIT_ENTRY_STATUS_MASK (0x000000FF) +#define SCU_VIIT_ENTRY_STATUS_SHIFT (0) + +#define SCU_VIIT_ENTRY_ID_INVALID (0 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_VIIT (1 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_IIT (2 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_VIRT_EXP (3 << SCU_VIIT_ENTRY_ID_SHIFT) + +#define SCU_VIIT_IPPT_SSP_INITIATOR (0x01 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_SMP_INITIATOR (0x02 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_STP_INITIATOR (0x04 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_INITIATOR \ + (\ + SCU_VIIT_IPPT_SSP_INITIATOR \ + | SCU_VIIT_IPPT_SMP_INITIATOR \ + | SCU_VIIT_IPPT_STP_INITIATOR \ + ) + +#define SCU_VIIT_STATUS_RNC_VALID (0x01 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_ADDRESS_VALID (0x02 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_RNI_VALID (0x04 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_ALL_VALID \ + (\ + SCU_VIIT_STATUS_RNC_VALID \ + | SCU_VIIT_STATUS_ADDRESS_VALID \ + | SCU_VIIT_STATUS_RNI_VALID \ + ) + +#define SCU_VIIT_IPPT_SMP_TARGET (0x10 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) + +/** + * struct scu_viit_entry - This is the SCU Virtual Initiator Table Entry + * + * + */ +struct scu_viit_entry { + /** + * This must be encoded as to the type of initiator that is being constructed + * for this port. + */ + u32 status; + + /** + * Virtual initiator high SAS Address + */ + u32 initiator_sas_address_hi; + + /** + * Virtual initiator low SAS Address + */ + u32 initiator_sas_address_lo; + + /** + * This must be 0 + */ + u32 reserved; + +}; + + +/* IIT Status Defines */ +#define SCU_IIT_ENTRY_ID_MASK (0xC0000000) +#define SCU_IIT_ENTRY_ID_SHIFT (30) + +#define SCU_IIT_ENTRY_STATUS_UPDATE_MASK (0x20000000) +#define SCU_IIT_ENTRY_STATUS_UPDATE_SHIFT (29) + +#define SCU_IIT_ENTRY_LPI_MASK (0x00000F00) +#define SCU_IIT_ENTRY_LPI_SHIFT (8) + +#define SCU_IIT_ENTRY_STATUS_MASK (0x000000FF) +#define SCU_IIT_ENTRY_STATUS_SHIFT (0) + +/* IIT Remote Initiator Defines */ +#define SCU_IIT_ENTRY_REMOTE_TAG_MASK (0x0000FFFF) +#define SCU_IIT_ENTRY_REMOTE_TAG_SHIFT (0) + +#define SCU_IIT_ENTRY_REMOTE_RNC_MASK (0x0FFF0000) +#define SCU_IIT_ENTRY_REMOTE_RNC_SHIFT (16) + +#define SCU_IIT_ENTRY_ID_INVALID (0 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_VIIT (1 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_IIT (2 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_VIRT_EXP (3 << SCU_IIT_ENTRY_ID_SHIFT) + +/** + * struct scu_iit_entry - This will be implemented later when we support + * virtual functions + * + * + */ +struct scu_iit_entry { + u32 status; + u32 remote_initiator_sas_address_hi; + u32 remote_initiator_sas_address_lo; + u32 remote_initiator; + +}; + +#endif /* _SCU_VIIT_DATA_HEADER_ */ diff --git a/drivers/scsi/isci/deprecated.c b/drivers/scsi/isci/deprecated.c new file mode 100644 index 0000000..847e687 --- /dev/null +++ b/drivers/scsi/isci/deprecated.c @@ -0,0 +1,491 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/** + * This file contains isci module object implementation. + * + * + */ + +#include "isci.h" +#include "request.h" +#include "sata.h" +#include "task.h" + + +/** + * scic_cb_stall_execution() - This method is called when the core requires the + * OS driver to stall execution. This method is utilized during + * initialization or non-performance paths only. + * @microseconds: This parameter specifies the number of microseconds for which + * to stall. The operating system driver is allowed to round this value up + * where necessary. + * + * none. + */ +void scic_cb_stall_execution( + u32 microseconds) +{ + udelay(microseconds); +} + + +/** + * scic_cb_io_request_get_physical_address() - This callback method asks the + * user to provide the physical address for the supplied virtual address + * when building an io request object. + * @controller: This parameter is the core controller object handle. + * @io_request: This parameter is the io request object handle for which the + * physical address is being requested. + * + * + */ +void scic_cb_io_request_get_physical_address( + struct scic_sds_controller *controller, + struct scic_sds_request *io_request, + void *virtual_address, + dma_addr_t *physical_address) +{ + struct isci_request *request = + (struct isci_request *)sci_object_get_association(io_request); + + char *requested_address = (char *)virtual_address; + char *base_address = (char *)request; + + BUG_ON(requested_address < base_address); + BUG_ON((requested_address - base_address) >= + request->request_alloc_size); + + *physical_address = request->request_daddr + + (requested_address - base_address); +} + +/** + * scic_cb_io_request_get_transfer_length() - This callback method asks the + * user to provide the number of bytes to be transfered as part of this + * request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the number of payload data bytes to be transfered for + * this IO request. + */ +u32 scic_cb_io_request_get_transfer_length( + void *scic_user_io_request) +{ + return isci_request_io_request_get_transfer_length( + scic_user_io_request + ); +} + + +/** + * scic_cb_io_request_get_data_direction() - This callback method asks the user + * to provide the data direction for this request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the value of SCI_IO_REQUEST_DATA_OUT or + * SCI_IO_REQUEST_DATA_IN, or SCI_IO_REQUEST_NO_DATA. + */ +SCI_IO_REQUEST_DATA_DIRECTION scic_cb_io_request_get_data_direction( + void *scic_user_io_request) +{ + return isci_request_io_request_get_data_direction( + scic_user_io_request + ); +} + + +/** + * scic_cb_io_request_get_next_sge() - This callback method asks the user to + * provide the address to where the next Scatter-Gather Element is located. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * @current_sge_address: This parameter specifies the address for the current + * SGE (i.e. the one that has just processed). + * + * An address specifying the location for the next scatter gather element to be + * processed. + */ +void scic_cb_io_request_get_next_sge( + void *scic_user_io_request, + void *current_sge_address, + void **next_sge) +{ + *next_sge = isci_request_io_request_get_next_sge( + scic_user_io_request, + current_sge_address + ); +} + +/** + * scic_cb_sge_get_address_field() - This callback method asks the user to + * provide the contents of the "address" field in the Scatter-Gather Element. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * @sge_address: This parameter specifies the address for the SGE from which to + * retrieve the address field. + * + * A physical address specifying the contents of the SGE's address field. + */ +dma_addr_t scic_cb_sge_get_address_field( + void *scic_user_io_request, + void *sge_address) +{ + return isci_request_sge_get_address_field( + scic_user_io_request, + sge_address + ); +} + +/** + * scic_cb_sge_get_length_field() - This callback method asks the user to + * provide the contents of the "length" field in the Scatter-Gather Element. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * @sge_address: This parameter specifies the address for the SGE from which to + * retrieve the address field. + * + * This method returns the length field specified inside the SGE referenced by + * the sge_address parameter. + */ +u32 scic_cb_sge_get_length_field( + void *scic_user_io_request, + void *sge_address) +{ + return isci_request_sge_get_length_field( + scic_user_io_request, + sge_address + ); +} + +/** + * scic_cb_ssp_io_request_get_cdb_address() - This callback method asks the + * user to provide the address for the command descriptor block (CDB) + * associated with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the virtual address of the CDB. + */ +void *scic_cb_ssp_io_request_get_cdb_address( + void *scic_user_io_request) +{ + return isci_request_ssp_io_request_get_cdb_address( + scic_user_io_request + ); +} + +/** + * scic_cb_ssp_io_request_get_cdb_length() - This callback method asks the user + * to provide the length of the command descriptor block (CDB) associated + * with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the length of the CDB. + */ +u32 scic_cb_ssp_io_request_get_cdb_length( + void *scic_user_io_request) +{ + return isci_request_ssp_io_request_get_cdb_length( + scic_user_io_request + ); +} + +/** + * scic_cb_ssp_io_request_get_lun() - This callback method asks the user to + * provide the Logical Unit (LUN) associated with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the LUN associated with this request. This should be u64? + */ +u32 scic_cb_ssp_io_request_get_lun( + void *scic_user_io_request) +{ + return isci_request_ssp_io_request_get_lun(scic_user_io_request); +} + +/** + * scic_cb_ssp_io_request_get_task_attribute() - This callback method asks the + * user to provide the task attribute associated with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the task attribute associated with this IO request. + */ +u32 scic_cb_ssp_io_request_get_task_attribute( + void *scic_user_io_request) +{ + return isci_request_ssp_io_request_get_task_attribute( + scic_user_io_request + ); +} + +/** + * scic_cb_ssp_io_request_get_command_priority() - This callback method asks + * the user to provide the command priority associated with this IO request. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the command priority associated with this IO request. + */ +u32 scic_cb_ssp_io_request_get_command_priority( + void *scic_user_io_request) +{ + return isci_request_ssp_io_request_get_command_priority( + scic_user_io_request + ); +} + +/** + * scic_cb_ssp_task_request_get_lun() - This method returns the Logical Unit to + * be utilized for this task management request. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the LUN associated with this request. This should be u64? + */ +u32 scic_cb_ssp_task_request_get_lun( + void *scic_user_task_request) +{ + return isci_task_ssp_request_get_lun( + (struct isci_request *)scic_user_task_request + ); +} + +/** + * scic_cb_ssp_task_request_get_function() - This method returns the task + * management function to be utilized for this task request. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns an unsigned byte representing the task management + * function to be performed. + */ +u8 scic_cb_ssp_task_request_get_function( + void *scic_user_task_request) +{ + return isci_task_ssp_request_get_function( + (struct isci_request *)scic_user_task_request + ); +} + +/** + * scic_cb_ssp_task_request_get_io_tag_to_manage() - This method returns the + * task management IO tag to be managed. Depending upon the task management + * function the value returned from this method may be ignored. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns an unsigned 16-bit word depicting the IO tag to be + * managed. + */ +u16 scic_cb_ssp_task_request_get_io_tag_to_manage( + void *scic_user_task_request) +{ + return isci_task_ssp_request_get_io_tag_to_manage( + (struct isci_request *)scic_user_task_request + ); +} + +/** + * scic_cb_ssp_task_request_get_response_data_address() - This callback method + * asks the user to provide the virtual address of the response data buffer + * for the supplied IO request. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the virtual address for the response data buffer + * associated with this IO request. + */ +void *scic_cb_ssp_task_request_get_response_data_address( + void *scic_user_task_request) +{ + return isci_task_ssp_request_get_response_data_address( + (struct isci_request *)scic_user_task_request + ); +} + +/** + * scic_cb_ssp_task_request_get_response_data_length() - This callback method + * asks the user to provide the length of the response data buffer for the + * supplied IO request. + * @scic_user_task_request: This parameter points to the user's task request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns the length of the response buffer data associated with + * this IO request. + */ +u32 scic_cb_ssp_task_request_get_response_data_length( + void *scic_user_task_request) +{ + return isci_task_ssp_request_get_response_data_length( + (struct isci_request *)scic_user_task_request + ); +} + +#if !defined(DISABLE_ATAPI) +/** + * scic_cb_stp_packet_io_request_get_cdb_address() - This user callback asks + * the user to provide stp packet io's the CDB address. + * @scic_user_io_request: + * + * The packet IO's cdb adress. + */ +void *scic_cb_stp_packet_io_request_get_cdb_address( + void *scic_user_io_request) +{ + return isci_request_stp_packet_io_request_get_cdb_address( + scic_user_io_request + ); +} + + +/** + * scic_cb_stp_packet_io_request_get_cdb_length() - This user callback asks the + * user to provide stp packet io's the CDB length. + * @scic_user_io_request: + * + * The packet IO's cdb length. + */ +u32 scic_cb_stp_packet_io_request_get_cdb_length( + void *scic_user_io_request) +{ + return isci_request_stp_packet_io_request_get_cdb_length( + scic_user_io_request + ); +} +#endif /* #if !defined(DISABLE_ATAPI) */ + + +/** + * scic_cb_io_request_do_copy_rx_frames() - This callback method asks the user + * if the received RX frame data is to be copied to the SGL or should be + * stored by the SCI core to be retrieved later with the + * scic_io_request_get_rx_frame(). + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns true if the SCI core should copy the received frame data + * to the SGL location or false if the SCI user wants to retrieve the frame + * data at a later time. + */ +bool scic_cb_io_request_do_copy_rx_frames( + void *scic_user_io_request) +{ + struct sas_task *task + = isci_request_access_task( + (struct isci_request *)scic_user_io_request + ); + + return (task->data_dir == DMA_NONE) ? false : true; +} + +/** + * scic_cb_get_virtual_address() - This callback method asks the user to + * provide the virtual address for the supplied physical address. + * @controller: This parameter is the core controller object handle. + * @physical_address: This parameter is the physical address which is to be + * returned as a virtual address. + * + * The method returns the virtual address for the supplied physical address. + */ +void *scic_cb_get_virtual_address( + struct scic_sds_controller *controller, + dma_addr_t physical_address) +{ + void *virt_addr = (void *)phys_to_virt(physical_address); + + return virt_addr; +} + +/** + * scic_cb_request_get_sat_protocol() - This callback method asks the user to + * return the SAT protocol definition for this IO request. This method is + * only called by the SCI core if the request type constructed is SATA. + * @scic_user_io_request: This parameter points to the user's IO request + * object. It is a cookie that allows the user to provide the necessary + * information for this callback. + * + * This method returns one of the sat.h defined protocols for the given io + * request. + */ +u8 scic_cb_request_get_sat_protocol( + void *scic_user_io_request) +{ + return isci_sata_get_sat_protocol( + (struct isci_request *)scic_user_io_request + ); +} diff --git a/drivers/scsi/isci/events.c b/drivers/scsi/isci/events.c new file mode 100644 index 0000000..75f9cd5 --- /dev/null +++ b/drivers/scsi/isci/events.c @@ -0,0 +1,619 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/** + * This file contains isci module object implementation. + * + * + */ + +#include "isci.h" +#include "request.h" +#include "sata.h" +#include "task.h" + +/** + * scic_cb_timer_create() - This callback method asks the user to create a + * timer and provide a handle for this timer for use in further timer + * interactions. The appropriate isci timer object function is called to + * create a timer object. + * @timer_callback: This parameter specifies the callback method to be invoked + * whenever the timer expires. + * @controller: This parameter specifies the controller with which this timer + * is to be associated. + * @cookie: This parameter specifies a piece of information that the user must + * retain. This cookie is to be supplied by the user anytime a timeout + * occurs for the created timer. + * + * This method returns a handle to a timer object created by the user. The + * handle will be utilized for all further interactions relating to this timer. + */ +void *scic_cb_timer_create( + struct scic_sds_controller *controller, + void (*timer_callback)(void *), + void *cookie) +{ + struct isci_host *isci_host; + struct isci_timer *timer = NULL; + + isci_host = (struct isci_host *)sci_object_get_association(controller); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p", + __func__, isci_host); + + timer = isci_timer_create(&isci_host->timer_list_struct, + isci_host, + cookie, + timer_callback); + + dev_dbg(&isci_host->pdev->dev, "%s: timer = %p\n", __func__, timer); + + return (void *)timer; +} + + +/** + * scic_cb_timer_start() - This callback method asks the user to start the + * supplied timer. The appropriate isci timer object function is called to + * start the timer. + * @controller: This parameter specifies the controller with which this timer + * is to associated. + * @timer: This parameter specifies the timer to be started. + * @milliseconds: This parameter specifies the number of milliseconds for which + * to stall. The operating system driver is allowed to round this value up + * where necessary. + * + */ +void scic_cb_timer_start( + struct scic_sds_controller *controller, + void *timer, + u32 milliseconds) +{ + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, timer = %p, milliseconds = %d\n", + __func__, isci_host, timer, milliseconds); + + isci_timer_start((struct isci_timer *)timer, milliseconds); + +} + +/** + * scic_cb_timer_stop() - This callback method asks the user to stop the + * supplied timer. The appropriate isci timer object function is called to + * stop the timer. + * @controller: This parameter specifies the controller with which this timer + * is to associated. + * @timer: This parameter specifies the timer to be stopped. + * + */ +void scic_cb_timer_stop( + struct scic_sds_controller *controller, + void *timer) +{ + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, timer = %p\n", + __func__, isci_host, timer); + + isci_timer_stop((struct isci_timer *)timer); +} + +/** + * scic_cb_controller_start_complete() - This user callback will inform the + * user that the controller has finished the start process. The associated + * isci host adapter's start_complete function is called. + * @controller: This parameter specifies the controller that was started. + * @completion_status: This parameter specifies the results of the start + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void scic_cb_controller_start_complete( + struct scic_sds_controller *controller, + enum sci_status completion_status) +{ + struct isci_host *isci_host = + (struct isci_host *)sci_object_get_association(controller); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p\n", __func__, isci_host); + + isci_host_start_complete(isci_host, completion_status); +} + +/** + * scic_cb_controller_stop_complete() - This user callback will inform the user + * that the controller has finished the stop process. The associated isci + * host adapter's start_complete function is called. + * @controller: This parameter specifies the controller that was stopped. + * @completion_status: This parameter specifies the results of the stop + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void scic_cb_controller_stop_complete( + struct scic_sds_controller *controller, + enum sci_status completion_status) +{ + struct isci_host *isci_host = + (struct isci_host *)sci_object_get_association(controller); + + dev_dbg(&isci_host->pdev->dev, + "%s: status = 0x%x\n", __func__, completion_status); + isci_host_stop_complete(isci_host, completion_status); +} + +/** + * scic_cb_io_request_complete() - This user callback will inform the user that + * an IO request has completed. + * @controller: This parameter specifies the controller on which the IO is + * completing. + * @remote_device: This parameter specifies the remote device on which this IO + * request is completing. + * @io_request: This parameter specifies the IO request that has completed. + * @completion_status: This parameter specifies the results of the IO request + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void scic_cb_io_request_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *scic_io_request, + enum sci_io_status completion_status) +{ + struct isci_request *request; + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + request = + (struct isci_request *)sci_object_get_association( + scic_io_request + ); + + isci_request_io_request_complete(isci_host, + request, + completion_status); +} + +/** + * scic_cb_task_request_complete() - This user callback will inform the user + * that a task management request completed. + * @controller: This parameter specifies the controller on which the task + * management request is completing. + * @remote_device: This parameter specifies the remote device on which this + * task management request is completing. + * @task_request: This parameter specifies the task management request that has + * completed. + * @completion_status: This parameter specifies the results of the IO request + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void scic_cb_task_request_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *scic_task_request, + enum sci_task_status completion_status) +{ + struct isci_request *request; + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + request = + (struct isci_request *)sci_object_get_association( + scic_task_request); + + isci_task_request_complete(isci_host, request, completion_status); +} + +/** + * scic_cb_port_stop_complete() - This method informs the user when a stop + * operation on the port has completed. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @completion_status: This parameter specifies the status for the operation + * being completed. + * + */ +void scic_cb_port_stop_complete( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + enum sci_status completion_status) +{ + pr_warn("%s:************************************************\n", + __func__); +} + +/** + * scic_cb_port_hard_reset_complete() - This method informs the user when a + * hard reset on the port has completed. This hard reset could have been + * initiated by the user or by the remote port. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @completion_status: This parameter specifies the status for the operation + * being completed. + * + */ +void scic_cb_port_hard_reset_complete( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + enum sci_status completion_status) +{ + struct isci_port *isci_port + = (struct isci_port *)sci_object_get_association(port); + + isci_port_hard_reset_complete(isci_port, completion_status); +} + +/** + * scic_cb_port_ready() - This method informs the user that the port is now in + * a ready state and can be utilized to issue IOs. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * + */ +void scic_cb_port_ready( + struct scic_sds_controller *controller, + struct scic_sds_port *port) +{ + struct isci_port *isci_port; + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + isci_port = + (struct isci_port *)sci_object_get_association(port); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + isci_port_ready(isci_host, isci_port); +} + +/** + * scic_cb_port_not_ready() - This method informs the user that the port is now + * not in a ready (i.e. busy) state and can't be utilized to issue IOs. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * + */ +void scic_cb_port_not_ready( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + u32 reason_code) +{ + struct isci_port *isci_port; + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + isci_port = + (struct isci_port *)sci_object_get_association(port); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + isci_port_not_ready(isci_host, isci_port); +} + +/** + * scic_cb_port_invalid_link_up() - This method informs the SCI Core user that + * a phy/link became ready, but the phy is not allowed in the port. In some + * situations the underlying hardware only allows for certain phy to port + * mappings. If these mappings are violated, then this API is invoked. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @phy: This parameter specifies the phy that came ready, but the phy can't be + * a valid member of the port. + * + */ +void scic_cb_port_invalid_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + pr_warn("%s:************************************************\n", + __func__); +} + +/** + * scic_cb_port_bc_change_primitive_received() - This callback method informs + * the user that a broadcast change primitive was received. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. For instances where the phy on which the primitive was + * received is not part of a port, this parameter will be + * SCI_INVALID_HANDLE_T. + * @phy: This parameter specifies the phy on which the primitive was received. + * + */ +void scic_cb_port_bc_change_primitive_received( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + dev_dbg(&isci_host->pdev->dev, + "%s: port = %p, phy = %p\n", __func__, port, phy); + isci_port_bc_change_received(isci_host, port, phy); +} + + + + +/** + * scic_cb_port_link_up() - This callback method informs the user that a phy + * has become operational and is capable of communicating with the remote + * end point. + * @controller: This parameter represents the controller associated with the + * phy. + * @port: This parameter specifies the port object for which the user callback + * is being invoked. There may be conditions where this parameter can be + * SCI_INVALID_HANDLE + * @phy: This parameter specifies the phy object for which the user callback is + * being invoked. + * + * none. + */ +void scic_cb_port_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + dev_dbg(&isci_host->pdev->dev, + "%s: phy = %p\n", __func__, phy); + + isci_port_link_up(isci_host, port, phy); +} + +/** + * scic_cb_port_link_down() - This callback method informs the user that a phy + * is no longer operational and is not capable of communicating with the + * remote end point. + * @controller: This parameter represents the controller associated with the + * phy. + * @port: This parameter specifies the port object for which the user callback + * is being invoked. There may be conditions where this parameter can be + * SCI_INVALID_HANDLE + * @phy: This parameter specifies the phy object for which the user callback is + * being invoked. + * + * none. + */ +void scic_cb_port_link_down( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + struct isci_host *isci_host; + struct isci_phy *isci_phy; + struct isci_port *isci_port; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + isci_phy = + (struct isci_phy *)sci_object_get_association(phy); + + isci_port = + (struct isci_port *)sci_object_get_association(port); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + isci_port_link_down(isci_host, isci_phy, isci_port); +} + +/** + * scic_cb_remote_device_start_complete() - This user callback method will + * inform the user that a start operation has completed. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the completion callback. + * @completion_status: This parameter specifies the completion status for the + * operation. + * + */ +void scic_cb_remote_device_start_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + enum sci_status completion_status) +{ + struct isci_host *isci_host; + struct isci_remote_device *isci_device; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + isci_device = + (struct isci_remote_device *)sci_object_get_association( + remote_device + ); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + isci_remote_device_start_complete( + isci_host, isci_device, completion_status); + +} + +/** + * scic_cb_remote_device_stop_complete() - This user callback method will + * inform the user that a stop operation has completed. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the completion callback. + * @completion_status: This parameter specifies the completion status for the + * operation. + * + */ +void scic_cb_remote_device_stop_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + enum sci_status completion_status) +{ + struct isci_host *isci_host; + struct isci_remote_device *isci_device; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + isci_device = + (struct isci_remote_device *)sci_object_get_association( + remote_device + ); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + isci_remote_device_stop_complete( + isci_host, isci_device, completion_status); + +} + +/** + * scic_cb_remote_device_ready() - This user callback method will inform the + * user that a remote device is now capable of handling IO requests. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the callback. + * + */ +void scic_cb_remote_device_ready( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device) +{ + struct isci_remote_device *isci_device = + (struct isci_remote_device *) + sci_object_get_association(remote_device); + + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + isci_remote_device_ready(isci_device); +} + +/** + * scic_cb_remote_device_not_ready() - This user callback method will inform + * the user that a remote device is no longer capable of handling IO + * requests (until a ready callback is invoked). + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the callback. + * @reason_code: This parameter specifies the reason for the remote device + * going to a not ready state. + * + */ +void scic_cb_remote_device_not_ready( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + u32 reason_code) +{ + struct isci_remote_device *isci_device = + (struct isci_remote_device *) + sci_object_get_association(remote_device); + + struct isci_host *isci_host; + + isci_host = + (struct isci_host *)sci_object_get_association(controller); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p, reason_code = %x\n", + __func__, isci_device, reason_code); + + isci_remote_device_not_ready(isci_device, reason_code); +} + + diff --git a/drivers/scsi/isci/firmware/Makefile b/drivers/scsi/isci/firmware/Makefile new file mode 100644 index 0000000..5f54461 --- /dev/null +++ b/drivers/scsi/isci/firmware/Makefile @@ -0,0 +1,19 @@ +# Makefile for create_fw +# +CC=gcc +CFLAGS=-c -Wall -O2 -g +LDFLAGS= +SOURCES=create_fw.c +OBJECTS=$(SOURCES:.cpp=.o) +EXECUTABLE=create_fw + +all: $(SOURCES) $(EXECUTABLE) + +$(EXECUTABLE): $(OBJECTS) + $(CC) $(LDFLAGS) $(OBJECTS) -o $@ + +.c.o: + $(CC) $(CFLAGS) $< -O $@ + +clean: + rm -f *.o $(EXECUTABLE) diff --git a/drivers/scsi/isci/firmware/README b/drivers/scsi/isci/firmware/README new file mode 100644 index 0000000..cf7e428 --- /dev/null +++ b/drivers/scsi/isci/firmware/README @@ -0,0 +1,36 @@ +This defines the temporary binary blow we are to pass to the SCU +driver to emulate the binary firmware that we will eventually be +able to access via NVRAM on the SCU controller. + +The current size of the binary blob is expected to be 149 bytes or larger + +Header Types: +0x1: Phy Masks +0x2: Phy Gens +0x3: SAS Addrs +0xff: End of Data + +ID string - u8[12]: "#SCU MAGIC#\0" +Version - u8: 1 +SubVersion - u8: 0 + +Header Type - u8: 0x1 +Size - u8: 8 +Phy Mask - u32[8] + +Header Type - u8: 0x2 +Size - u8: 8 +Phy Gen - u32[8] + +Header Type - u8: 0x3 +Size - u8: 8 +Sas Addr - u64[8] + +Header Type - u8: 0xf + + +============================================================================== + +Place isci_firmware.bin in /lib/firmware +Be sure to recreate the initramfs image to include the firmware. + diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c new file mode 100644 index 0000000..442caac --- /dev/null +++ b/drivers/scsi/isci/firmware/create_fw.c @@ -0,0 +1,177 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +char blob_name[] = "isci_firmware.bin"; +char id[] = "#SCU MAGIC#"; +unsigned char version = 1; +unsigned char sub_version = 0; + + +/* + * For all defined arrays: + * elements 0-3 are for SCU0, ports 0-3 + * elements 4-7 are for SCU1, ports 0-3 + * + * valid configurations for one SCU are: + * P0 P1 P2 P3 + * ---------------- + * 0xF,0x0,0x0,0x0 # 1 x4 port + * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1 + * # ports + * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2 + * # port + * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port + * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration) + * + * if there is a port/phy on which you do not wish to override the default + * values, use the value assigned to UNINIT_PARAM (255). + */ +unsigned int phy_mask[] = { 1, 2, 4, 8, 1, 2, 4, 8 }; + + +/* denotes SAS generation. i.e. 3: SAS Gen 3 6G */ +unsigned int phy_gen[] = { 3, 3, 3, 3, 3, 3, 3, 3 }; + +/* + * if there is a port/phy on which you do not wish to override the default + * values, use the value "0000000000000000". SAS address of zero's is + * considered invalid and will not be used. + */ +unsigned long long sas_addr[] = { 0x5FCFFFFFF0000000ULL, + 0x5FCFFFFFF1000000ULL, + 0x5FCFFFFFF2000000ULL, + 0x5FCFFFFFF3000000ULL, + 0x5FCFFFFFF4000000ULL, + 0x5FCFFFFFF5000000ULL, + 0x5FCFFFFFF6000000ULL, + 0x5FCFFFFFF7000000ULL }; + +int write_blob(void) +{ + FILE *fd; + int err; + + fd = fopen(blob_name, "w+"); + if (!fd) { + perror("Open file for write failed"); + return -EIO; + } + + /* write id */ + err = fwrite((void *)id, sizeof(char), strlen(id)+1, fd); + if (err == 0) { + perror("write id failed"); + return err; + } + + /* write version */ + err = fwrite((void *)&version, sizeof(version), 1, fd); + if (err == 0) { + perror("write version failed"); + return err; + } + + /* write sub version */ + err = fwrite((void *)&sub_version, sizeof(sub_version), 1, fd); + if (err == 0) { + perror("write subversion failed"); + return err; + } + + /* write phy mask header */ + err = fputc(0x1, fd); + if (err == EOF) { + perror("write phy mask header failed"); + return -EIO; + } + + /* write size */ + err = fputc(8, fd); + if (err == EOF) { + perror("write phy mask size failed"); + return -EIO; + } + + /* write phy masks */ + err = fwrite((void *)phy_mask, 1, sizeof(phy_mask), fd); + if (err == 0) { + perror("write phy_mask failed"); + return err; + } + + /* write phy gen header */ + err = fputc(0x2, fd); + if (err == EOF) { + perror("write phy gen header failed"); + return -EIO; + } + + /* write size */ + err = fputc(8, fd); + if (err == EOF) { + perror("write phy gen size failed"); + return -EIO; + } + + /* write phy_gen */ + err = fwrite((void *)phy_gen, + 1, + sizeof(phy_gen), + fd); + if (err == 0) { + perror("write phy_gen failed"); + return err; + } + + /* write phy gen header */ + err = fputc(0x3, fd); + if (err == EOF) { + perror("write sas addr header failed"); + return -EIO; + } + + /* write size */ + err = fputc(8, fd); + if (err == EOF) { + perror("write sas addr size failed"); + return -EIO; + } + + /* write sas_addr */ + err = fwrite((void *)sas_addr, + 1, + sizeof(sas_addr), + fd); + if (err == 0) { + perror("write sas_addr failed"); + return err; + } + + /* write end header */ + err = fputc(0xff, fd); + if (err == EOF) { + perror("write end header failed"); + return -EIO; + } + + fclose(fd); + + return 0; +} + +int main(void) +{ + int err; + + err = write_blob(); + if (err < 0) + return err; + + return 0; +} diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c new file mode 100644 index 0000000..6f16f4d --- /dev/null +++ b/drivers/scsi/isci/host.c @@ -0,0 +1,781 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "scic_io_request.h" +#include "scic_remote_device.h" +#include "scic_port.h" + +#include "port.h" +#include "request.h" +#include "host.h" + +/** + * isci_isr() - This function is the interrupt service routine for the + * controller. It schedules the tasklet and returns. + * @vec: This parameter specifies the interrupt vector. + * @data: This parameter specifies the ISCI host object. + * + * IRQ_HANDLED if out interrupt otherwise, IRQ_NONE + */ +irqreturn_t isci_isr(int vec, void *data) +{ + struct isci_host *isci_host + = (struct isci_host *)data; + struct scic_controller_handler_methods *handlers + = &isci_host->scic_irq_handlers[SCI_MSIX_NORMAL_VECTOR]; + irqreturn_t ret = IRQ_NONE; + + if (isci_host_get_state(isci_host) != isci_starting + && handlers->interrupt_handler) { + + if (handlers->interrupt_handler(isci_host->core_controller)) { + if (isci_host_get_state(isci_host) != isci_stopped) { + tasklet_schedule( + &isci_host->completion_tasklet); + } else + dev_dbg(&isci_host->pdev->dev, + "%s: controller stopped\n", + __func__); + ret = IRQ_HANDLED; + } + } else + dev_warn(&isci_host->pdev->dev, + "%s: get_handler_methods failed, " + "isci_host->status = 0x%x\n", + __func__, + isci_host_get_state(isci_host)); + + return ret; +} + +irqreturn_t isci_legacy_isr(int vec, void *data) +{ + struct pci_dev *pdev = data; + struct isci_host *isci_host; + struct scic_controller_handler_methods *handlers; + irqreturn_t ret = IRQ_NONE; + + /* + * Since this is a legacy interrupt, either or both + * controllers could have triggered it. Thus, we have to call + * the legacy interrupt handler for all controllers on the + * PCI function. + */ + for_each_isci_host(isci_host, pdev) { + handlers = &isci_host->scic_irq_handlers[SCI_MSIX_NORMAL_VECTOR]; + + if (isci_host_get_state(isci_host) != isci_starting + && handlers->interrupt_handler) { + + if (handlers->interrupt_handler(isci_host->core_controller)) { + if (isci_host_get_state(isci_host) != isci_stopped) { + tasklet_schedule( + &isci_host->completion_tasklet); + } else + dev_dbg(&isci_host->pdev->dev, + "%s: controller stopped\n", + __func__); + ret = IRQ_HANDLED; + } + } else + dev_warn(&isci_host->pdev->dev, + "%s: get_handler_methods failed, " + "isci_host->status = 0x%x\n", + __func__, + isci_host_get_state(isci_host)); + } + return ret; +} + + +/** + * isci_host_start_complete() - This function is called by the core library, + * through the ISCI Module, to indicate controller start status. + * @isci_host: This parameter specifies the ISCI host object + * @completion_status: This parameter specifies the completion status from the + * core library. + * + */ +void isci_host_start_complete( + struct isci_host *isci_host, + enum sci_status completion_status) +{ + if (completion_status == SCI_SUCCESS) { + dev_dbg(&isci_host->pdev->dev, + "%s: completion_status: SCI_SUCCESS\n", __func__); + isci_host_change_state(isci_host, isci_ready); + complete_all(&isci_host->start_complete); + } else + dev_err(&isci_host->pdev->dev, + "controller start failed with " + "completion_status = 0x%x;", + completion_status); + +} + + + +/** + * isci_host_scan_finished() - This function is one of the SCSI Host Template + * functions. The SCSI midlayer calls this function during a target scan, + * approx. once every 10 millisecs. + * @shost: This parameter specifies the SCSI host being scanned + * @time: This parameter specifies the number of ticks since the scan started. + * + * scan status, zero indicates the SCSI midlayer should continue to poll, + * otherwise assume controller is ready. + */ +int isci_host_scan_finished( + struct Scsi_Host *shost, + unsigned long time) +{ + struct isci_host *isci_host + = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); + + struct scic_controller_handler_methods *handlers + = &isci_host->scic_irq_handlers[SCI_MSIX_NORMAL_VECTOR]; + + if (handlers->interrupt_handler == NULL) { + dev_err(&isci_host->pdev->dev, + "%s: scic_controller_get_handler_methods failed\n", + __func__); + return 1; + } + + /** + * check interrupt_handler's status and call completion_handler if true, + * link_up events should be coming from the scu core lib, as phy's come + * online. for each link_up from the core, call + * get_received_identify_address_frame, copy the frame into the + * sas_phy object and call libsas notify_port_event(PORTE_BYTES_DMAED). + * continue to return zero from thee scan_finished routine until + * the scic_cb_controller_start_complete() call comes from the core. + **/ + if (handlers->interrupt_handler(isci_host->core_controller)) + handlers->completion_handler(isci_host->core_controller); + + if (isci_starting == isci_host_get_state(isci_host) + && time < (HZ * 10)) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host->status = %d, time = %ld\n", + __func__, isci_host_get_state(isci_host), time); + return 0; + } + + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host->status = %d, time = %ld\n", + __func__, isci_host_get_state(isci_host), time); + + scic_controller_enable_interrupts(isci_host->core_controller); + + return 1; + +} + + +/** + * isci_host_scan_start() - This function is one of the SCSI Host Template + * function, called by the SCSI mid layer berfore a target scan begins. The + * core library controller start routine is called from here. + * @shost: This parameter specifies the SCSI host to be scanned + * + */ +void isci_host_scan_start(struct Scsi_Host *shost) +{ + struct isci_host *isci_host; + + isci_host = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); + isci_host_change_state(isci_host, isci_starting); + + scic_controller_disable_interrupts(isci_host->core_controller); + init_completion(&isci_host->start_complete); + scic_controller_start( + isci_host->core_controller, + scic_controller_get_suggested_start_timeout( + isci_host->core_controller) + ); +} + +void isci_host_stop_complete( + struct isci_host *isci_host, + enum sci_status completion_status) +{ + isci_host_change_state(isci_host, isci_stopped); + scic_controller_disable_interrupts( + isci_host->core_controller + ); + complete(&isci_host->stop_complete); +} + +static struct coherent_memory_info *isci_host_alloc_mdl_struct( + struct isci_host *isci_host, + u32 size) +{ + struct coherent_memory_info *mdl_struct; + void *uncached_address = NULL; + + + mdl_struct = devm_kzalloc(&isci_host->pdev->dev, + sizeof(*mdl_struct), + GFP_KERNEL); + if (!mdl_struct) + return NULL; + + INIT_LIST_HEAD(&mdl_struct->node); + + uncached_address = dmam_alloc_coherent(&isci_host->pdev->dev, + size, + &mdl_struct->dma_handle, + GFP_KERNEL); + if (!uncached_address) + return NULL; + + /* memset the whole memory area. */ + memset((char *)uncached_address, 0, size); + mdl_struct->vaddr = uncached_address; + mdl_struct->size = (size_t)size; + + return mdl_struct; +} + +static void isci_host_build_mde( + struct sci_physical_memory_descriptor *mde_struct, + struct coherent_memory_info *mdl_struct) +{ + unsigned long address = 0; + dma_addr_t dma_addr = 0; + + address = (unsigned long)mdl_struct->vaddr; + dma_addr = mdl_struct->dma_handle; + + /* to satisfy the alignment. */ + if ((address % mde_struct->constant_memory_alignment) != 0) { + int align_offset + = (mde_struct->constant_memory_alignment + - (address % mde_struct->constant_memory_alignment)); + address += align_offset; + dma_addr += align_offset; + } + + mde_struct->virtual_address = (void *)address; + mde_struct->physical_address = dma_addr; + mdl_struct->mde = mde_struct; +} + +static int isci_host_mdl_allocate_coherent( + struct isci_host *isci_host) +{ + struct sci_physical_memory_descriptor *current_mde; + struct coherent_memory_info *mdl_struct; + u32 size = 0; + + struct sci_base_memory_descriptor_list *mdl_handle + = sci_controller_get_memory_descriptor_list_handle( + isci_host->core_controller); + + sci_mdl_first_entry(mdl_handle); + + current_mde = sci_mdl_get_current_entry(mdl_handle); + + while (current_mde != NULL) { + + size = (current_mde->constant_memory_size + + current_mde->constant_memory_alignment); + + mdl_struct = isci_host_alloc_mdl_struct(isci_host, size); + if (!mdl_struct) + return -ENOMEM; + + list_add_tail(&mdl_struct->node, &isci_host->mdl_struct_list); + + isci_host_build_mde(current_mde, mdl_struct); + + sci_mdl_next_entry(mdl_handle); + current_mde = sci_mdl_get_current_entry(mdl_handle); + } + + return 0; +} + + +/** + * isci_host_completion_routine() - This function is the delayed service + * routine that calls the sci core library's completion handler. It's + * scheduled as a tasklet from the interrupt service routine when interrupts + * in use, or set as the timeout function in polled mode. + * @data: This parameter specifies the ISCI host object + * + */ +static void isci_host_completion_routine(unsigned long data) +{ + struct isci_host *isci_host = (struct isci_host *)data; + struct scic_controller_handler_methods *handlers + = &isci_host->scic_irq_handlers[SCI_MSIX_NORMAL_VECTOR]; + struct list_head completed_request_list; + struct list_head aborted_request_list; + struct list_head *current_position; + struct list_head *next_position; + struct isci_request *request; + struct isci_request *next_request; + struct sas_task *task; + + INIT_LIST_HEAD(&completed_request_list); + INIT_LIST_HEAD(&aborted_request_list); + + spin_lock_irq(&isci_host->scic_lock); + + if (handlers->completion_handler) { + handlers->completion_handler( + isci_host->core_controller + ); + } + /* Take the lists of completed I/Os from the host. */ + list_splice_init(&isci_host->requests_to_complete, + &completed_request_list); + + list_splice_init(&isci_host->requests_to_abort, + &aborted_request_list); + + spin_unlock_irq(&isci_host->scic_lock); + + /* Process any completions in the lists. */ + list_for_each_safe(current_position, next_position, + &completed_request_list) { + + request = list_entry(current_position, struct isci_request, + completed_node); + task = isci_request_access_task(request); + + /* Normal notification (task_done) */ + dev_dbg(&isci_host->pdev->dev, + "%s: Normal - request/task = %p/%p\n", + __func__, + request, + task); + + task->task_done(task); + task->lldd_task = NULL; + + /* Free the request object. */ + isci_request_free(isci_host, request); + } + list_for_each_entry_safe(request, next_request, &aborted_request_list, + completed_node) { + + task = isci_request_access_task(request); + + /* Use sas_task_abort */ + dev_warn(&isci_host->pdev->dev, + "%s: Error - request/task = %p/%p\n", + __func__, + request, + task); + + /* Put the task into the abort path. */ + sas_task_abort(task); + } + +} + +void isci_host_deinit( + struct isci_host *isci_host) +{ + int i; + + isci_host_change_state(isci_host, isci_stopping); + for (i = 0; i < SCI_MAX_PORTS; i++) { + struct isci_port *port = &isci_host->isci_ports[i]; + struct isci_remote_device *device, *tmpdev; + list_for_each_entry_safe(device, tmpdev, + &port->remote_dev_list, node) { + isci_remote_device_change_state(device, isci_stopping); + isci_remote_device_stop(device); + } + } + + /* stop the comtroller and wait for completion. */ + init_completion(&isci_host->stop_complete); + scic_controller_stop( + isci_host->core_controller, + SCIC_CONTROLLER_STOP_TIMEOUT + ); + wait_for_completion(&isci_host->stop_complete); + /* next, reset the controller. */ + scic_controller_reset(isci_host->core_controller); +} + +static int isci_verify_firmware(const struct firmware *fw, + struct isci_firmware *isci_fw) +{ + const u8 *tmp; + + if (fw->size < ISCI_FIRMWARE_MIN_SIZE) + return -EINVAL; + + tmp = fw->data; + + /* 12th char should be the NULL terminate for the ID string */ + if (tmp[11] != '\0') + return -EINVAL; + + if (strncmp("#SCU MAGIC#", tmp, 11) != 0) + return -EINVAL; + + isci_fw->id = tmp; + isci_fw->version = fw->data[ISCI_FW_VER_OFS]; + isci_fw->subversion = fw->data[ISCI_FW_SUBVER_OFS]; + + tmp = fw->data + ISCI_FW_DATA_OFS; + + while (*tmp != ISCI_FW_HDR_EOF) { + switch (*tmp) { + case ISCI_FW_HDR_PHYMASK: + tmp++; + isci_fw->phy_masks_size = *tmp; + tmp++; + isci_fw->phy_masks = (const u32 *)tmp; + tmp += sizeof(u32) * isci_fw->phy_masks_size; + break; + + case ISCI_FW_HDR_PHYGEN: + tmp++; + isci_fw->phy_gens_size = *tmp; + tmp++; + isci_fw->phy_gens = (const u32 *)tmp; + tmp += sizeof(u32) * isci_fw->phy_gens_size; + break; + + case ISCI_FW_HDR_SASADDR: + tmp++; + isci_fw->sas_addrs_size = *tmp; + tmp++; + isci_fw->sas_addrs = (const u64 *)tmp; + tmp += sizeof(u64) * isci_fw->sas_addrs_size; + break; + + default: + pr_err("bad field in firmware binary blob\n"); + return -EINVAL; + } + } + + pr_info("isci firmware v%u.%u loaded.\n", + isci_fw->version, isci_fw->subversion); + + return SCI_SUCCESS; +} + +static void __iomem *scu_base(struct isci_host *isci_host) +{ + struct pci_dev *pdev = isci_host->pdev; + int id = isci_host->id; + + return pcim_iomap_table(pdev)[SCI_SCU_BAR * 2] + SCI_SCU_BAR_SIZE * id; +} + +static void __iomem *smu_base(struct isci_host *isci_host) +{ + struct pci_dev *pdev = isci_host->pdev; + int id = isci_host->id; + + return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id; +} + +#define SCI_MAX_TIMER_COUNT 25 + +int isci_host_init(struct isci_host *isci_host) +{ + int err = 0; + int index = 0; + enum sci_status status; + struct scic_sds_controller *controller; + struct scic_sds_port *scic_port; + struct scic_controller_handler_methods *handlers + = &isci_host->scic_irq_handlers[0]; + union scic_oem_parameters scic_oem_params; + union scic_user_parameters scic_user_params; + const struct firmware *fw = NULL; + struct isci_firmware *isci_fw = NULL; + + INIT_LIST_HEAD(&isci_host->timer_list_struct.timers); + isci_timer_list_construct( + &isci_host->timer_list_struct, + SCI_MAX_TIMER_COUNT + ); + + controller = scic_controller_alloc(&isci_host->pdev->dev); + + if (!controller) { + err = -ENOMEM; + dev_err(&isci_host->pdev->dev, "%s: failed (%d)\n", __func__, err); + goto out; + } + + isci_host->core_controller = controller; + spin_lock_init(&isci_host->state_lock); + spin_lock_init(&isci_host->scic_lock); + spin_lock_init(&isci_host->queue_lock); + + isci_host_change_state(isci_host, isci_starting); + isci_host->can_queue = ISCI_CAN_QUEUE_VAL; + + status = scic_controller_construct(controller, scu_base(isci_host), + smu_base(isci_host)); + + if (status != SCI_SUCCESS) { + dev_err(&isci_host->pdev->dev, + "%s: scic_controller_construct failed - status = %x\n", + __func__, + status); + err = -ENODEV; + goto out; + } + + isci_host->sas_ha.dev = &isci_host->pdev->dev; + isci_host->sas_ha.lldd_ha = isci_host; + + /*----------- SCIC controller Initialization Stuff ------------------ + * set association host adapter struct in core controller. + */ + sci_object_set_association(isci_host->core_controller, + (void *)isci_host + ); + + /* grab initial values stored in the controller object for OEM and USER + * parameters */ + scic_oem_parameters_get(controller, &scic_oem_params); + scic_user_parameters_get(controller, &scic_user_params); + + isci_fw = devm_kzalloc(&isci_host->pdev->dev, + sizeof(struct isci_firmware), + GFP_KERNEL); + if (!isci_fw) { + dev_warn(&isci_host->pdev->dev, + "allocating firmware struct failed\n"); + dev_warn(&isci_host->pdev->dev, + "Default OEM configuration being used:" + " 4 narrow ports, and default SAS Addresses\n"); + goto set_default_params; + } + + status = request_firmware(&fw, ISCI_FW_NAME, &isci_host->pdev->dev); + if (status) { + dev_warn(&isci_host->pdev->dev, + "Loading firmware failed, using default values\n"); + dev_warn(&isci_host->pdev->dev, + "Default OEM configuration being used:" + " 4 narrow ports, and default SAS Addresses\n"); + goto set_default_params; + } + else { + status = isci_verify_firmware(fw, isci_fw); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "firmware verification failed\n"); + dev_warn(&isci_host->pdev->dev, + "Default OEM configuration being used:" + " 4 narrow ports, and default SAS " + "Addresses\n"); + goto set_default_params; + } + + /* grab any OEM and USER parameters specified at module load */ + status = isci_parse_oem_parameters(&scic_oem_params, + isci_host->id, isci_fw); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "parsing firmware oem parameters failed\n"); + err = -EINVAL; + goto out; + } + + status = isci_parse_user_parameters(&scic_user_params, + isci_host->id, isci_fw); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: isci_parse_user_parameters" + " failed\n", __func__); + err = -EINVAL; + goto out; + } + } + + set_default_params: + + status = scic_oem_parameters_set(isci_host->core_controller, + &scic_oem_params + ); + + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: scic_oem_parameters_set failed\n", + __func__); + err = -ENODEV; + goto out; + } + + + status = scic_user_parameters_set(isci_host->core_controller, + &scic_user_params + ); + + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: scic_user_parameters_set failed\n", + __func__); + err = -ENODEV; + goto out; + } + + status = scic_controller_initialize(isci_host->core_controller); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: scic_controller_initialize failed -" + " status = 0x%x\n", + __func__, status); + err = -ENODEV; + goto out; + } + + /* @todo: use both MSI-X interrupts, and don't do indirect + * calls to the handlers just register direct calls + */ + if (isci_host->pdev->msix_enabled) { + status = scic_controller_get_handler_methods( + SCIC_MSIX_INTERRUPT_TYPE, + SCI_MSIX_DOUBLE_VECTOR, + handlers + ); + } else { + status = scic_controller_get_handler_methods( + SCIC_LEGACY_LINE_INTERRUPT_TYPE, + 0, + handlers + ); + } + + if (status != SCI_SUCCESS) { + handlers->interrupt_handler = NULL; + handlers->completion_handler = NULL; + dev_err(&isci_host->pdev->dev, + "%s: scic_controller_get_handler_methods failed\n", + __func__); + } + + tasklet_init(&isci_host->completion_tasklet, + isci_host_completion_routine, + (unsigned long)isci_host + ); + + INIT_LIST_HEAD(&(isci_host->mdl_struct_list)); + + INIT_LIST_HEAD(&isci_host->requests_to_complete); + INIT_LIST_HEAD(&isci_host->requests_to_abort); + + /* populate mdl with dma memory. scu_mdl_allocate_coherent() */ + err = isci_host_mdl_allocate_coherent(isci_host); + + if (err) + goto err_out; + + /* + * keep the pool alloc size around, will use it for a bounds checking + * when trying to convert virtual addresses to physical addresses + */ + isci_host->dma_pool_alloc_size = sizeof(struct isci_request) + + scic_io_request_get_object_size(); + isci_host->dma_pool = dmam_pool_create(DRV_NAME, &isci_host->pdev->dev, + isci_host->dma_pool_alloc_size, + SLAB_HWCACHE_ALIGN, 0); + + if (!isci_host->dma_pool) { + err = -ENOMEM; + goto req_obj_err_out; + } + + for (index = 0; index < SCI_MAX_PORTS; index++) { + isci_port_init(&isci_host->isci_ports[index], + isci_host, index); + } + + for (index = 0; index < SCI_MAX_PHYS; index++) + isci_phy_init(&isci_host->phys[index], isci_host, index); + + /* Why are we doing this? Is this even necessary? */ + memcpy(&isci_host->sas_addr[0], &isci_host->phys[0].sas_addr[0], + SAS_ADDR_SIZE); + + /* Start the ports */ + for (index = 0; index < SCI_MAX_PORTS; index++) { + + scic_controller_get_port_handle(controller, index, &scic_port); + scic_port_start(scic_port); + } + + goto out; + +/* SPB_Debug: destroy request object cache */ + req_obj_err_out: +/* SPB_Debug: destroy remote object cache */ + err_out: +/* SPB_Debug: undo controller init, construct and alloc, remove from parent + * controller list. */ + out: + if (fw) + release_firmware(fw); + return err; +} diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h new file mode 100644 index 0000000..3530076 --- /dev/null +++ b/drivers/scsi/isci/host.h @@ -0,0 +1,283 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the isci_module initialization routines. + * + * host.h + */ + + + +#if !defined(_SCI_HOST_H_) +#define _SCI_HOST_H_ + +#include "phy.h" +/*#include "task.h"*/ +#include "timers.h" +#include "remote_device.h" +#include "scic_user_callback.h" + +#define DRV_NAME "isci" +#define SCI_PCI_BAR_COUNT 2 +#define SCI_NUM_MSI_X_INT 2 +#define SCI_SMU_BAR 0 +#define SCI_SMU_BAR_SIZE (16*1024) +#define SCI_SCU_BAR 1 +#define SCI_SCU_BAR_SIZE (4*1024*1024) +#define SCI_IO_SPACE_BAR0 2 +#define SCI_IO_SPACE_BAR1 3 +#define SCI_MSIX_NORMAL_VECTOR 0 +#define SCI_MSIX_ERROR_VECTOR 1 +#define SCI_MSIX_SINGLE_VECTOR 1 +#define SCI_MSIX_DOUBLE_VECTOR 2 +#define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ +#define SCIC_CONTROLLER_STOP_TIMEOUT 5000 + +struct coherent_memory_info { + struct list_head node; + dma_addr_t dma_handle; + void *vaddr; + size_t size; + struct sci_physical_memory_descriptor *mde; +}; + +struct isci_host { + struct scic_sds_controller *core_controller; + struct scic_controller_handler_methods scic_irq_handlers[SCI_NUM_MSI_X_INT]; + union scic_oem_parameters oem_parameters; + + int id; /* unique within a given pci device */ + struct isci_timer_list timer_list_struct; + void *core_ctrl_memory; + struct dma_pool *dma_pool; + unsigned int dma_pool_alloc_size; + struct isci_phy phys[SCI_MAX_PHYS]; + + /* isci_ports and sas_ports are implicitly parallel to the + * ports maintained by the core + */ + struct isci_port isci_ports[SCI_MAX_PORTS]; + struct asd_sas_port sas_ports[SCI_MAX_PORTS]; + struct sas_ha_struct sas_ha; + + int can_queue; + spinlock_t queue_lock; + spinlock_t state_lock; + + struct pci_dev *pdev; + u8 sas_addr[SAS_ADDR_SIZE]; + + enum isci_status status; + struct Scsi_Host *shost; + struct tasklet_struct completion_tasklet; + struct list_head mdl_struct_list; + struct list_head requests_to_complete; + struct list_head requests_to_abort; + struct completion stop_complete; + struct completion start_complete; + spinlock_t scic_lock; + struct isci_host *next; +}; + + +/** + * struct isci_pci_info - This class represents the pci function containing the + * controllers. Depending on PCI SKU, there could be up to 2 controllers in + * the PCI function. + */ +#define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS) + +struct isci_pci_info { + struct msix_entry msix_entries[SCI_MAX_MSIX_INT]; + int core_lib_array_index; + SCI_LIBRARY_HANDLE_T core_lib_handle; + struct isci_host *hosts; +}; + +static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) +{ + return pci_get_drvdata(pdev); +} + +#define for_each_isci_host(isci_host, pdev) \ + for (isci_host = to_pci_info(pdev)->hosts;\ + isci_host; isci_host = isci_host->next) + +static inline +enum isci_status isci_host_get_state( + struct isci_host *isci_host) +{ + return isci_host->status; +} + + +static inline void isci_host_change_state( + struct isci_host *isci_host, + enum isci_status status) +{ + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, state = 0x%x", + __func__, + isci_host, + status); + spin_lock_irqsave(&isci_host->state_lock, flags); + isci_host->status = status; + spin_unlock_irqrestore(&isci_host->state_lock, flags); + +} + +static inline int isci_host_can_queue( + struct isci_host *isci_host, + int num) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&isci_host->queue_lock, flags); + if ((isci_host->can_queue - num) < 0) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host->can_queue = %d\n", + __func__, + isci_host->can_queue); + ret = -SAS_QUEUE_FULL; + + } else + isci_host->can_queue -= num; + + spin_unlock_irqrestore(&isci_host->queue_lock, flags); + + return ret; +} + +static inline void isci_host_can_dequeue( + struct isci_host *isci_host, + int num) +{ + unsigned long flags; + + spin_lock_irqsave(&isci_host->queue_lock, flags); + isci_host->can_queue += num; + spin_unlock_irqrestore(&isci_host->queue_lock, flags); +} + +/** + * isci_host_from_sas_ha() - This accessor retrieves the isci_host object + * reference from the Linux sas_ha_struct reference. + * @ha_struct,: This parameter points to the Linux sas_ha_struct object + * + * A reference to the associated isci_host structure. + */ +#define isci_host_from_sas_ha(ha_struct) \ + ((struct isci_host *)(ha_struct)->lldd_ha) + +/** + * isci_host_scan_finished() - + * + * This function is one of the SCSI Host Template functions. The SCSI midlayer + * calls this function during a target scan, approx. once every 10 millisecs. + */ +int isci_host_scan_finished( + struct Scsi_Host *, + unsigned long); + + +/** + * isci_host_scan_start() - + * + * This function is one of the SCSI Host Template function, called by the SCSI + * mid layer berfore a target scan begins. The core library controller start + * routine is called from here. + */ +void isci_host_scan_start( + struct Scsi_Host *); + +/** + * isci_host_start_complete() - + * + * This function is called by the core library, through the ISCI Module, to + * indicate controller start status. + */ +void isci_host_start_complete( + struct isci_host *, + enum sci_status); + +void isci_host_stop_complete( + struct isci_host *isci_host, + enum sci_status completion_status); + +int isci_host_init(struct isci_host *); + +void isci_host_init_controller_names( + struct isci_host *isci_host, + unsigned int controller_idx); + +void isci_host_deinit( + struct isci_host *); + +void isci_host_port_link_up( + struct isci_host *, + struct scic_sds_port *, + struct scic_sds_phy *); +int isci_host_dev_found(struct domain_device *); + +void isci_host_remote_device_start_complete( + struct isci_host *, + struct isci_remote_device *, + enum sci_status); + +#endif /* !defined(_SCI_HOST_H_) */ diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c new file mode 100644 index 0000000..07b072f --- /dev/null +++ b/drivers/scsi/isci/init.c @@ -0,0 +1,613 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include "isci.h" +#include "task.h" +#include "sci_controller_constants.h" +#include "scic_remote_device.h" +#include "sci_environment.h" + +static struct scsi_transport_template *isci_transport_template; +struct kmem_cache *isci_kmem_cache; + +static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { + { PCI_VDEVICE(INTEL, 0x1D61),}, + { PCI_VDEVICE(INTEL, 0x1D63),}, + { PCI_VDEVICE(INTEL, 0x1D65),}, + { PCI_VDEVICE(INTEL, 0x1D67),}, + { PCI_VDEVICE(INTEL, 0x1D69),}, + { PCI_VDEVICE(INTEL, 0x1D6B),}, + { PCI_VDEVICE(INTEL, 0x1D60),}, + { PCI_VDEVICE(INTEL, 0x1D62),}, + { PCI_VDEVICE(INTEL, 0x1D64),}, + { PCI_VDEVICE(INTEL, 0x1D66),}, + { PCI_VDEVICE(INTEL, 0x1D68),}, + { PCI_VDEVICE(INTEL, 0x1D6A),}, + {} +}; + +static int __devinit isci_pci_probe( + struct pci_dev *pdev, + const struct pci_device_id *device_id_p); + +static void __devexit isci_pci_remove(struct pci_dev *pdev); + +MODULE_DEVICE_TABLE(pci, isci_id_table); + +static struct pci_driver isci_pci_driver = { + .name = DRV_NAME, + .id_table = isci_id_table, + .probe = isci_pci_probe, + .remove = __devexit_p(isci_pci_remove), +}; + +/* linux isci specific settings */ +int loglevel = 3; +module_param(loglevel, int, S_IRUGO | S_IWUSR); + +#if defined(CONFIG_PBG_HBA_A0) +int isci_si_rev = ISCI_SI_REVA0; +#elif defined(CONFIG_PBG_HBA_A2) +int isci_si_rev = ISCI_SI_REVA2; +#else +int isci_si_rev = ISCI_SI_REVB0; +#endif +module_param(isci_si_rev, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(isci_si_rev, "override default si rev (0: A0 1: A2 2: B0)"); + +static struct scsi_host_template isci_sht = { + + .module = THIS_MODULE, + .name = DRV_NAME, + .queuecommand = sas_queuecommand, + .target_alloc = sas_target_alloc, + .slave_configure = sas_slave_configure, + .slave_destroy = sas_slave_destroy, + .scan_finished = isci_host_scan_finished, + .scan_start = isci_host_scan_start, + .change_queue_depth = sas_change_queue_depth, + .change_queue_type = sas_change_queue_type, + .bios_param = sas_bios_param, + .can_queue = ISCI_CAN_QUEUE_VAL, + .cmd_per_lun = 1, + .this_id = -1, + .sg_tablesize = SG_ALL, + .max_sectors = SCSI_DEFAULT_MAX_SECTORS, + .use_clustering = ENABLE_CLUSTERING, + .eh_device_reset_handler = sas_eh_device_reset_handler, + .eh_bus_reset_handler = isci_bus_reset_handler, + .slave_alloc = sas_slave_alloc, + .target_destroy = sas_target_destroy, + .ioctl = sas_ioctl, +}; + +static struct sas_domain_function_template isci_transport_ops = { + + /* The class calls these to notify the LLDD of an event. */ + .lldd_port_formed = isci_port_formed, + .lldd_port_deformed = isci_port_deformed, + + /* The class calls these when a device is found or gone. */ + .lldd_dev_found = isci_remote_device_found, + .lldd_dev_gone = isci_remote_device_gone, + + .lldd_execute_task = isci_task_execute_task, + /* Task Management Functions. Must be called from process context. */ + .lldd_abort_task = isci_task_abort_task, + .lldd_abort_task_set = isci_task_abort_task_set, + .lldd_clear_aca = isci_task_clear_aca, + .lldd_clear_task_set = isci_task_clear_task_set, + .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset, + .lldd_lu_reset = isci_task_lu_reset, + .lldd_query_task = isci_task_query_task, + + /* Port and Adapter management */ + .lldd_clear_nexus_port = isci_task_clear_nexus_port, + .lldd_clear_nexus_ha = isci_task_clear_nexus_ha, + + /* Phy management */ + .lldd_control_phy = isci_phy_control, +}; + + +/****************************************************************************** +* P R O T E C T E D M E T H O D S +******************************************************************************/ + + + +/** + * isci_register_sas_ha() - This method initializes various lldd + * specific members of the sas_ha struct and calls the libsas + * sas_register_ha() function. + * @isci_host: This parameter specifies the lldd specific wrapper for the + * libsas sas_ha struct. + * + * This method returns an error code indicating sucess or failure. The user + * should check for possible memory allocation error return otherwise, a zero + * indicates success. + */ +static int isci_register_sas_ha(struct isci_host *isci_host) +{ + int i; + struct sas_ha_struct *sas_ha = &(isci_host->sas_ha); + struct asd_sas_phy **sas_phys; + struct asd_sas_port **sas_ports; + + sas_phys = devm_kzalloc(&isci_host->pdev->dev, + SCI_MAX_PHYS * sizeof(void *), + GFP_KERNEL); + if (!sas_phys) + return -ENOMEM; + + sas_ports = devm_kzalloc(&isci_host->pdev->dev, + SCI_MAX_PORTS * sizeof(void *), + GFP_KERNEL); + if (!sas_ports) + return -ENOMEM; + + /*----------------- Libsas Initialization Stuff---------------------- + * Set various fields in the sas_ha struct: + */ + + sas_ha->sas_ha_name = DRV_NAME; + sas_ha->lldd_module = THIS_MODULE; + sas_ha->sas_addr = &(isci_host->sas_addr[0]); + + /* set the array of phy and port structs. */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + sas_phys[i] = &(isci_host->phys[i].sas_phy); + sas_ports[i] = &(isci_host->sas_ports[i]); + } + + sas_ha->sas_phy = sas_phys; + sas_ha->sas_port = sas_ports; + sas_ha->num_phys = SCI_MAX_PHYS; + + sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL; + sas_ha->lldd_max_execute_num = 1; + sas_ha->strict_wide_ports = 1; + + sas_register_ha(sas_ha); + + return 0; +} + +static void isci_unregister_sas_ha(struct isci_host *isci_host) +{ + if (!isci_host) + return; + + sas_unregister_ha(&(isci_host->sas_ha)); + + sas_remove_host(isci_host->shost); + scsi_remove_host(isci_host->shost); + scsi_host_put(isci_host->shost); +} + +static int __devinit isci_pci_init(struct pci_dev *pdev) +{ + int err, bar_num, bar_mask; + void __iomem * const *iomap; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, + "failed enable PCI device %s!\n", + pci_name(pdev)); + return err; + } + + for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++) + bar_mask |= 1 << (bar_num * 2); + + err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME); + if (err) + return err; + + iomap = pcim_iomap_table(pdev); + if (!iomap) + return -ENOMEM; + + pci_set_master(pdev); + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) + return err; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) + return err; + } + + return 0; +} + +static struct isci_host *isci_host_by_id(struct pci_dev *pdev, int id) +{ + struct isci_host *h; + + for_each_isci_host(h, pdev) + if (h->id == id) + return h; + return NULL; +} + +static int num_controllers(struct pci_dev *pdev) +{ + /* bar size alone can tell us if we are running with a dual controller + * part, no need to trust revision ids that might be under broken firmware + * control + */ + resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2); + resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2); + + if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS && + smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS) + return SCI_MAX_CONTROLLERS; + else + return 1; +} + +static int isci_setup_interrupts(struct pci_dev *pdev) +{ + int err, i, num_msix; + struct isci_pci_info *pci_info = to_pci_info(pdev); + + /* + * Determine the number of vectors associated with this + * PCI function. + */ + num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT; + + for (i = 0; i < num_msix; i++) + pci_info->msix_entries[i].entry = i; + + err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix); + if (err) + goto intx; + + for (i = 0; i < num_msix; i++) { + int id = i / SCI_NUM_MSI_X_INT; + struct msix_entry *msix = &pci_info->msix_entries[i]; + struct isci_host *isci_host = isci_host_by_id(pdev, id); + + BUG_ON(!isci_host); + + /* @todo: need to handle error case. */ + err = devm_request_irq(&pdev->dev, msix->vector, isci_isr, 0, + DRV_NAME"-msix", isci_host); + if (!err) + continue; + + dev_info(&pdev->dev, "msix setup failed falling back to intx\n"); + while (i--) { + id = i / SCI_NUM_MSI_X_INT; + isci_host = isci_host_by_id(pdev, id); + msix = &pci_info->msix_entries[i]; + devm_free_irq(&pdev->dev, msix->vector, isci_host); + } + pci_disable_msix(pdev); + goto intx; + } + + return 0; + + intx: + err = devm_request_irq(&pdev->dev, pdev->irq, isci_legacy_isr, + IRQF_SHARED, DRV_NAME"-intx", pdev); + + return err; +} + +/** + * isci_parse_oem_parameters() - This method will take OEM parameters + * from the module init parameters and copy them to oem_params. This will + * only copy values that are not set to the module parameter default values + * @oem_parameters: This parameter specifies the controller default OEM + * parameters. It is expected that this has been initialized to the default + * parameters for the controller + * + * + */ +enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params, + int scu_index, + struct isci_firmware *fw) +{ + int i; + + /* check for valid inputs */ + if (!(scu_index >= 0 + && scu_index < SCI_MAX_CONTROLLERS + && oem_params != NULL)) { + return SCI_FAILURE; + } + + for (i = 0; i < SCI_MAX_PHYS; i++) { + int array_idx = i + (SCI_MAX_PHYS * scu_index); + u64 sas_addr = fw->sas_addrs[array_idx]; + + if (sas_addr != 0) { + oem_params->sds1.phys[i].sas_address.low = + (u32)(sas_addr & 0xffffffff); + oem_params->sds1.phys[i].sas_address.high = + (u32)((sas_addr >> 32) & 0xffffffff); + } + } + + for (i = 0; i < SCI_MAX_PORTS; i++) { + int array_idx = i + (SCI_MAX_PORTS * scu_index); + u32 pmask = fw->phy_masks[array_idx]; + + oem_params->sds1.ports[i].phy_mask = pmask; + } + + return SCI_SUCCESS; +} + +/** + * isci_parse_user_parameters() - This method will take user parameters + * from the module init parameters and copy them to user_params. This will + * only copy values that are not set to the module parameter default values + * @user_parameters: This parameter specifies the controller default user + * parameters. It is expected that this has been initialized to the default + * parameters for the controller + * + * + */ +enum sci_status isci_parse_user_parameters( + union scic_user_parameters *user_params, + int scu_index, + struct isci_firmware *fw) +{ + int i; + + if (!(scu_index >= 0 + && scu_index < SCI_MAX_CONTROLLERS + && user_params != NULL)) { + return SCI_FAILURE; + } + + for (i = 0; i < SCI_MAX_PORTS; i++) { + int array_idx = i + (SCI_MAX_PORTS * scu_index); + u32 gen = fw->phy_gens[array_idx]; + + user_params->sds1.phys[i].max_speed_generation = gen; + + } + + return SCI_SUCCESS; +} + +static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) +{ + struct isci_host *isci_host; + struct Scsi_Host *shost; + int err; + + isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL); + if (!isci_host) + return NULL; + + isci_host->pdev = pdev; + isci_host->id = id; + + shost = scsi_host_alloc(&isci_sht, sizeof(void *)); + if (!shost) + return NULL; + isci_host->shost = shost; + + err = isci_host_init(isci_host); + if (err) + goto err_shost; + + SHOST_TO_SAS_HA(shost) = &isci_host->sas_ha; + isci_host->sas_ha.core.shost = shost; + shost->transportt = isci_transport_template; + + shost->max_id = ~0; + shost->max_lun = ~0; + shost->max_cmd_len = MAX_COMMAND_SIZE; + + err = scsi_add_host(shost, &pdev->dev); + if (err) + goto err_shost; + + err = isci_register_sas_ha(isci_host); + if (err) + goto err_shost_remove; + + return isci_host; + + err_shost_remove: + scsi_remove_host(shost); + err_shost: + scsi_host_put(shost); + + return NULL; +} + +static void check_si_rev(struct pci_dev *pdev) +{ + if (num_controllers(pdev) > 1) + isci_si_rev = ISCI_SI_REVB0; + else { + switch (pdev->revision) { + case 0: + case 1: + /* if the id is ambiguous don't update isci_si_rev */ + break; + case 3: + isci_si_rev = ISCI_SI_REVA2; + break; + default: + case 4: + isci_si_rev = ISCI_SI_REVB0; + break; + } + } + + dev_info(&pdev->dev, "driver configured for %s silicon (rev: %d)\n", + isci_si_rev == ISCI_SI_REVA0 ? "A0" : + isci_si_rev == ISCI_SI_REVA2 ? "A2" : "B0", pdev->revision); + +} + +static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct isci_pci_info *pci_info; + int err, i; + struct isci_host *isci_host; + + check_si_rev(pdev); + + pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL); + if (!pci_info) + return -ENOMEM; + pci_set_drvdata(pdev, pci_info); + + err = isci_pci_init(pdev); + if (err) + return err; + + for (i = 0; i < num_controllers(pdev); i++) { + struct isci_host *h = isci_host_alloc(pdev, i); + + if (!h) { + err = -ENOMEM; + goto err_host_alloc; + } + + h->next = pci_info->hosts; + pci_info->hosts = h; + } + + err = isci_setup_interrupts(pdev); + if (err) + goto err_host_alloc; + + for_each_isci_host(isci_host, pdev) + scsi_scan_host(isci_host->shost); + + return 0; + + err_host_alloc: + for_each_isci_host(isci_host, pdev) + isci_unregister_sas_ha(isci_host); + return err; +} + +static void __devexit isci_pci_remove(struct pci_dev *pdev) +{ + struct isci_host *isci_host; + + for_each_isci_host(isci_host, pdev) { + isci_unregister_sas_ha(isci_host); + isci_host_deinit(isci_host); + scic_controller_disable_interrupts(isci_host->core_controller); + } +} + +static __init int isci_init(void) +{ + int err = -ENOMEM; + + pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME); + + isci_kmem_cache = kmem_cache_create(DRV_NAME, + sizeof(struct isci_remote_device) + + scic_remote_device_get_object_size(), + 0, 0, NULL); + if (!isci_kmem_cache) + return err; + + isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); + if (!isci_transport_template) + goto err_kmem; + + err = pci_register_driver(&isci_pci_driver); + if (err) + goto err_sas; + + return 0; + + err_sas: + sas_release_transport(isci_transport_template); + err_kmem: + kmem_cache_destroy(isci_kmem_cache); + + return err; +} + +static __exit void isci_exit(void) +{ + pci_unregister_driver(&isci_pci_driver); + sas_release_transport(isci_transport_template); + kmem_cache_destroy(isci_kmem_cache); +} + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_FIRMWARE(ISCI_FW_NAME); +module_init(isci_init); +module_exit(isci_exit); diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h new file mode 100644 index 0000000..7d984f4 --- /dev/null +++ b/drivers/scsi/isci/isci.h @@ -0,0 +1,138 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the isci_module object definition. + * + * isci.h + */ + +#if !defined(_SCI_MODULE_H_) +#define _SCI_MODULE_H_ + +/** + * This file contains the SCI low level driver interface to the SCI and Libsas + * Libraries. + * + * isci.h + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sci_types.h" +#include "sci_base_controller.h" +#include "scic_controller.h" +#include "host.h" +#include "timers.h" +#include "sci_status.h" + +extern int loglevel; +extern struct kmem_cache *isci_kmem_cache; + +#define ISCI_FW_NAME "isci/isci_firmware.bin" + +#define ISCI_FIRMWARE_MIN_SIZE 149 + +#define ISCI_FW_IDSIZE 12 +#define ISCI_FW_VER_OFS ISCI_FW_IDSIZE +#define ISCI_FW_SUBVER_OFS ISCI_FW_VER_OFS + 1 +#define ISCI_FW_DATA_OFS ISCI_FW_SUBVER_OFS + 1 + +#define ISCI_FW_HDR_PHYMASK 0x1 +#define ISCI_FW_HDR_PHYGEN 0x2 +#define ISCI_FW_HDR_SASADDR 0x3 +#define ISCI_FW_HDR_EOF 0xff + +struct isci_firmware { + const u8 *id; + u8 version; + u8 subversion; + const u32 *phy_masks; + u8 phy_masks_size; + const u32 *phy_gens; + u8 phy_gens_size; + const u64 *sas_addrs; + u8 sas_addrs_size; +}; + +irqreturn_t isci_isr(int vec, void *data); +irqreturn_t isci_legacy_isr(int vec, void *data); + +enum sci_status isci_parse_oem_parameters( + union scic_oem_parameters *oem_params, + int scu_index, + struct isci_firmware *fw); + +enum sci_status isci_parse_user_parameters( + union scic_user_parameters *user_params, + int scu_index, + struct isci_firmware *fw); + +#ifdef ISCI_SLAVE_ALLOC +extern int ISCI_SLAVE_ALLOC(struct scsi_device *scsi_dev); +#endif /* ISCI_SLAVE_ALLOC */ + +#ifdef ISCI_SLAVE_DESTROY +extern void ISCI_SLAVE_DESTROY(struct scsi_device *scsi_dev); +#endif /* ISCI_SLAVE_DESTROY */ +#endif /* !defined(_SCI_MODULE_H_) */ diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c new file mode 100644 index 0000000..fbda570 --- /dev/null +++ b/drivers/scsi/isci/phy.c @@ -0,0 +1,179 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "phy.h" +#include "scic_port.h" +#include "scic_config_parameters.h" + + +/** + * isci_phy_init() - This function is called by the probe function to + * initialize the phy objects. This func assumes that the isci_port objects + * associated with the SCU have been initialized. + * @isci_phy: This parameter specifies the isci_phy object to initialize + * @isci_host: This parameter specifies the parent SCU host object for this + * isci_phy + * @index: This parameter specifies which SCU phy associates with this + * isci_phy. Generally, SCU phy 0 relates isci_phy 0, etc. + * + */ +void isci_phy_init( + struct isci_phy *phy, + struct isci_host *isci_host, + int index) +{ + struct scic_sds_controller *controller = isci_host->core_controller; + struct scic_sds_phy *scic_phy; + union scic_oem_parameters oem_parameters; + enum sci_status status = SCI_SUCCESS; + + /*--------------- SCU_Phy Initialization Stuff -----------------------*/ + + status = scic_controller_get_phy_handle(controller, index, &scic_phy); + if (status == SCI_SUCCESS) { + sci_object_set_association(scic_phy, (void *)phy); + phy->sci_phy_handle = scic_phy; + } else + dev_err(&isci_host->pdev->dev, + "failed scic_controller_get_phy_handle\n"); + + scic_oem_parameters_get(controller, &oem_parameters); + + phy->sas_addr[0] = oem_parameters.sds1.phys[index].sas_address.low + & 0xFF; + phy->sas_addr[1] = (oem_parameters.sds1.phys[index].sas_address.low + >> 8) & 0xFF; + phy->sas_addr[2] = (oem_parameters.sds1.phys[index].sas_address.low + >> 16) & 0xFF; + phy->sas_addr[3] = (oem_parameters.sds1.phys[index].sas_address.low + >> 24) & 0xFF; + phy->sas_addr[4] = oem_parameters.sds1.phys[index].sas_address.high + & 0xFF; + phy->sas_addr[5] = (oem_parameters.sds1.phys[index].sas_address.high + >> 8) & 0xFF; + phy->sas_addr[6] = (oem_parameters.sds1.phys[index].sas_address.high + >> 16) & 0xFF; + phy->sas_addr[7] = (oem_parameters.sds1.phys[index].sas_address.high + >> 24) & 0xFF; + + phy->isci_port = NULL; + phy->sas_phy.enabled = 0; + phy->sas_phy.id = index; + phy->sas_phy.sas_addr = &phy->sas_addr[0]; + phy->sas_phy.frame_rcvd = (u8 *)&phy->frame_rcvd; + phy->sas_phy.ha = &isci_host->sas_ha; + phy->sas_phy.lldd_phy = phy; + phy->sas_phy.enabled = 1; + phy->sas_phy.class = SAS; + phy->sas_phy.iproto = SAS_PROTOCOL_ALL; + phy->sas_phy.tproto = 0; + phy->sas_phy.type = PHY_TYPE_PHYSICAL; + phy->sas_phy.role = PHY_ROLE_INITIATOR; + phy->sas_phy.oob_mode = OOB_NOT_CONNECTED; + phy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN; + memset((u8 *)&phy->frame_rcvd, 0, sizeof(phy->frame_rcvd)); +} + + +/** + * isci_phy_control() - This function is one of the SAS Domain Template + * functions. This is a phy management function. + * @phy: This parameter specifies the sphy being controlled. + * @func: This parameter specifies the phy control function being invoked. + * @buf: This parameter is specific to the phy function being invoked. + * + * status, zero indicates success. + */ +int isci_phy_control( + struct asd_sas_phy *phy, + enum phy_func func, + void *buf) +{ + int ret = TMF_RESP_FUNC_COMPLETE; + struct isci_phy *isci_phy_ptr = (struct isci_phy *)phy->lldd_phy; + struct isci_port *isci_port_ptr = NULL; + + if (isci_phy_ptr != NULL) + isci_port_ptr = isci_phy_ptr->isci_port; + + if ((isci_phy_ptr == NULL) || (isci_port_ptr == NULL)) { + pr_err("%s: asd_sas_phy %p: lldd_phy %p or " + "isci_port %p == NULL!\n", + __func__, phy, isci_phy_ptr, isci_port_ptr); + return TMF_RESP_FUNC_FAILED; + } + + pr_debug("%s: phy %p; func %d; buf %p; isci phy %p, port %p\n", + __func__, phy, func, buf, isci_phy_ptr, isci_port_ptr); + + switch (func) { + case PHY_FUNC_HARD_RESET: + case PHY_FUNC_LINK_RESET: + + /* Perform the port reset. */ + ret = isci_port_perform_hard_reset(isci_port_ptr, isci_phy_ptr); + + break; + + case PHY_FUNC_DISABLE: + default: + pr_debug("%s: phy %p; func %d NOT IMPLEMENTED!\n", + __func__, phy, func); + ret = TMF_RESP_FUNC_FAILED; + break; + } + return ret; +} diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h new file mode 100644 index 0000000..44b727f --- /dev/null +++ b/drivers/scsi/isci/phy.h @@ -0,0 +1,104 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +#if !defined(_ISCI_PHY_H_) +#define _ISCI_PHY_H_ + +#include "port.h" +#include "host.h" +#include + + +/** + * struct isci_phy - This class implements the ISCI specific representation of + * the phy object. + * + * + */ + +struct isci_phy { + + struct scic_sds_phy *sci_phy_handle; + + struct asd_sas_phy sas_phy; + struct sas_identify_frame *frame; + struct isci_port *isci_port; + u8 sas_addr[SAS_ADDR_SIZE]; + + union { + + u8 aif[sizeof(struct sci_sas_identify_address_frame)]; + u8 fis[sizeof(struct sata_fis_reg_d2h)]; + + } frame_rcvd; +}; + +#define to_isci_phy(p) \ + container_of(p, struct isci_phy, sas_phy); + +struct isci_host; + +void isci_phy_init( + struct isci_phy *phy, + struct isci_host *isci_host, + int index); + +int isci_phy_control( + struct asd_sas_phy *phy, + enum phy_func func, + void *buf); + +#endif /* !defined(_ISCI_PHY_H_) */ diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c new file mode 100644 index 0000000..2343f65 --- /dev/null +++ b/drivers/scsi/isci/port.c @@ -0,0 +1,484 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the isci port implementation. + * + * + */ + + +#include +#include "isci.h" +#include "scic_io_request.h" +#include "scic_remote_device.h" +#include "scic_phy.h" +#include "scic_sds_phy.h" +#include "scic_port.h" +#include "port.h" +#include "request.h" + +static void isci_port_change_state( + struct isci_port *isci_port, + enum isci_status status); + + + +/** + * isci_port_init() - This function initializes the given isci_port object. + * @isci_port: This parameter specifies the port object to be initialized. + * @isci_host: This parameter specifies parent controller object for the port. + * @index: This parameter specifies which SCU port the isci_port associates + * with. Generally, SCU port 0 relates to isci_port 0, etc. + * + */ +void isci_port_init( + struct isci_port *isci_port, + struct isci_host *isci_host, + int index) +{ + struct scic_sds_port *scic_port; + struct scic_sds_controller *controller = isci_host->core_controller; + + INIT_LIST_HEAD(&isci_port->remote_dev_list); + INIT_LIST_HEAD(&isci_port->domain_dev_list); + spin_lock_init(&isci_port->remote_device_lock); + spin_lock_init(&isci_port->state_lock); + init_completion(&isci_port->start_complete); + isci_port->isci_host = isci_host; + isci_port_change_state(isci_port, isci_freed); + + (void)scic_controller_get_port_handle(controller, index, &scic_port); + sci_object_set_association(scic_port, isci_port); + isci_port->sci_port_handle = scic_port; +} + + +/** + * isci_port_get_state() - This function gets the status of the port object. + * @isci_port: This parameter points to the isci_port object + * + * status of the object as a isci_status enum. + */ +enum isci_status isci_port_get_state( + struct isci_port *isci_port) +{ + return isci_port->status; +} + +static void isci_port_change_state( + struct isci_port *isci_port, + enum isci_status status) +{ + unsigned long flags; + + dev_dbg(&isci_port->isci_host->pdev->dev, + "%s: isci_port = %p, state = 0x%x\n", + __func__, isci_port, status); + + spin_lock_irqsave(&isci_port->state_lock, flags); + isci_port->status = status; + spin_unlock_irqrestore(&isci_port->state_lock, flags); +} + +void isci_port_bc_change_received( + struct isci_host *isci_host, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + struct isci_phy *isci_phy = + (struct isci_phy *)sci_object_get_association(phy); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_phy = %p, sas_phy = %p\n", + __func__, + isci_phy, + &isci_phy->sas_phy); + + isci_host->sas_ha.notify_port_event( + &isci_phy->sas_phy, + PORTE_BROADCAST_RCVD + ); + + scic_port_enable_broadcast_change_notification(port); +} + +/** + * isci_port_link_up() - This function is called by the sci core when a link + * becomes active. the identify address frame is retrieved from the core and + * a notify port event is sent to libsas. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the sci port with the active link. + * @phy: This parameter specifies the sci phy with the active link. + * + */ +void isci_port_link_up( + struct isci_host *isci_host, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + unsigned long flags; + struct scic_port_properties properties; + struct isci_phy *isci_phy + = (struct isci_phy *)sci_object_get_association(phy); + struct isci_port *isci_port + = (struct isci_port *)sci_object_get_association(port); + enum sci_status call_status; + unsigned long success = true; + + BUG_ON(isci_phy->isci_port != NULL); + isci_phy->isci_port = isci_port; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", + __func__, isci_port); + + spin_lock_irqsave(&isci_phy->sas_phy.frame_rcvd_lock, flags); + + isci_port_change_state(isci_phy->isci_port, isci_starting); + + scic_port_get_properties(port, &properties); + + if (properties.remote.protocols.u.bits.stp_target) { + + struct scic_sata_phy_properties sata_phy_properties; + + isci_phy->sas_phy.oob_mode = SATA_OOB_MODE; + + /* Get a copy of the signature fis for libsas */ + call_status = scic_sata_phy_get_properties(phy, + &sata_phy_properties); + + /* + * XXX I am concerned about this "assert". shouldn't we + * handle the return appropriately? + */ + BUG_ON(call_status != SCI_SUCCESS); + + memcpy(isci_phy->frame_rcvd.fis, + &sata_phy_properties.signature_fis, + sizeof(struct sata_fis_reg_d2h)); + + isci_phy->sas_phy.frame_rcvd_size = sizeof(struct sata_fis_reg_d2h); + + /* + * For direct-attached SATA devices, the SCI core will + * automagically assign a SAS address to the end device + * for the purpose of creating a port. This SAS address + * will not be the same as assigned to the PHY and needs + * to be obtained from struct scic_port_properties properties. + */ + + BUG_ON(((size_t)SAS_ADDR_SIZE / 2) + != sizeof(properties.remote.sas_address.low)); + + memcpy(&isci_phy->sas_phy.attached_sas_addr[0], + &properties.remote.sas_address.low, + SAS_ADDR_SIZE / 2); + + memcpy(&isci_phy->sas_phy.attached_sas_addr[4], + &properties.remote.sas_address.high, + SAS_ADDR_SIZE / 2); + + } else if (properties.remote.protocols.u.bits.ssp_target || + properties.remote.protocols.u.bits.smp_target) { + + struct scic_sas_phy_properties sas_phy_properties; + + isci_phy->sas_phy.oob_mode = SAS_OOB_MODE; + + /* Get a copy of the identify address frame for libsas */ + call_status = scic_sas_phy_get_properties(phy, + &sas_phy_properties); + + BUG_ON(call_status != SCI_SUCCESS); + + memcpy(isci_phy->frame_rcvd.aif, + &(sas_phy_properties.received_iaf), + sizeof(struct sci_sas_identify_address_frame)); + + isci_phy->sas_phy.frame_rcvd_size + = sizeof(struct sci_sas_identify_address_frame); + + /* Copy the attached SAS address from the IAF */ + memcpy(isci_phy->sas_phy.attached_sas_addr, + ((struct sas_identify_frame *) + (&isci_phy->frame_rcvd.aif))->sas_addr, + SAS_ADDR_SIZE); + + } else { + dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__); + success = false; + } + + spin_unlock_irqrestore(&isci_phy->sas_phy.frame_rcvd_lock, flags); + + /* Notify libsas that we have an address frame, if indeed + * we've found an SSP, SMP, or STP target */ + if (success) + isci_host->sas_ha.notify_port_event(&isci_phy->sas_phy, + PORTE_BYTES_DMAED); +} + + +/** + * isci_port_link_down() - This function is called by the sci core when a link + * becomes inactive. + * @isci_host: This parameter specifies the isci host object. + * @phy: This parameter specifies the isci phy with the active link. + * @port: This parameter specifies the isci port with the active link. + * + */ +void isci_port_link_down( + struct isci_host *isci_host, + struct isci_phy *isci_phy, + struct isci_port *isci_port) +{ + struct isci_remote_device *isci_device; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + if (isci_port) { + + /* check to see if this is the last phy on this port. */ + if (isci_phy->sas_phy.port + && isci_phy->sas_phy.port->num_phys == 1) { + + /* change the state for all devices on this port. + * The next task sent to this device will be returned + * as SAS_TASK_UNDELIVERED, and the scsi mid layer + * will remove the target + */ + list_for_each_entry(isci_device, + &isci_port->remote_dev_list, + node) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", + __func__, isci_device); + isci_remote_device_change_state(isci_device, + isci_stopping); + } + } + isci_port_change_state(isci_port, isci_stopping); + } + + /* Notify libsas of the borken link, this will trigger calls to our + * isci_port_deformed and isci_dev_gone functions. + */ + sas_phy_disconnected(&isci_phy->sas_phy); + isci_host->sas_ha.notify_phy_event(&isci_phy->sas_phy, + PHYE_LOSS_OF_SIGNAL); + + isci_phy->isci_port = NULL; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p - Done\n", __func__, isci_port); +} + + +/** + * isci_port_deformed() - This function is called by libsas when a port becomes + * inactive. + * @phy: This parameter specifies the libsas phy with the inactive port. + * + */ +void isci_port_deformed( + struct asd_sas_phy *phy) +{ + pr_debug("%s: sas_phy = %p\n", __func__, phy); +} + +/** + * isci_port_formed() - This function is called by libsas when a port becomes + * active. + * @phy: This parameter specifies the libsas phy with the active port. + * + */ +void isci_port_formed( + struct asd_sas_phy *phy) +{ + pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port); +} + +/** + * isci_port_ready() - This function is called by the sci core when a link + * becomes ready. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the sci port with the active link. + * + */ +void isci_port_ready( + struct isci_host *isci_host, + struct isci_port *isci_port) +{ + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + complete_all(&isci_port->start_complete); + isci_port_change_state(isci_port, isci_ready); + return; +} + +/** + * isci_port_not_ready() - This function is called by the sci core when a link + * is not ready. All remote devices on this link will be removed if they are + * in the stopping state. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the sci port with the active link. + * + */ +void isci_port_not_ready( + struct isci_host *isci_host, + struct isci_port *isci_port) +{ + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); +} + +/** + * isci_port_hard_reset_complete() - This function is called by the sci core + * when the hard reset complete notification has been received. + * @port: This parameter specifies the sci port with the active link. + * @completion_status: This parameter specifies the core status for the reset + * process. + * + */ +void isci_port_hard_reset_complete( + struct isci_port *isci_port, + enum sci_status completion_status) +{ + dev_dbg(&isci_port->isci_host->pdev->dev, + "%s: isci_port = %p, completion_status=%x\n", + __func__, isci_port, completion_status); + + /* Save the status of the hard reset from the port. */ + isci_port->hard_reset_status = completion_status; + + complete_all(&isci_port->hard_reset_complete); +} +/** + * isci_port_perform_hard_reset() - This function is one of the SAS Domain + * Template functions. This is a phy management function. + * @isci_port: + * @isci_phy: + * + * status, TMF_RESP_FUNC_COMPLETE indicates success. + */ +int isci_port_perform_hard_reset( + struct isci_port *isci_port, + struct isci_phy *isci_phy) +{ + enum sci_status status; + int ret = TMF_RESP_FUNC_COMPLETE; + unsigned long flags; + + + dev_dbg(&isci_port->isci_host->pdev->dev, + "%s: isci_port = %p\n", + __func__, isci_port); + + BUG_ON(isci_port == NULL); + + init_completion(&isci_port->hard_reset_complete); + + spin_lock_irqsave(&isci_port->isci_host->scic_lock, flags); + + #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT + status = scic_port_hard_reset(isci_port->sci_port_handle, + ISCI_PORT_RESET_TIMEOUT); + + spin_unlock_irqrestore(&isci_port->isci_host->scic_lock, flags); + + if (status == SCI_SUCCESS) { + wait_for_completion(&isci_port->hard_reset_complete); + + dev_dbg(&isci_port->isci_host->pdev->dev, + "%s: isci_port = %p; hard reset completion\n", + __func__, isci_port); + + if (isci_port->hard_reset_status != SCI_SUCCESS) + ret = TMF_RESP_FUNC_FAILED; + } else { + ret = TMF_RESP_FUNC_FAILED; + + dev_err(&isci_port->isci_host->pdev->dev, + "%s: isci_port = %p; scic_port_hard_reset call" + " failed 0x%x\n", + __func__, isci_port, status); + + } + + /* If the hard reset for the port has failed, consider this + * the same as link failures on all phys in the port. + */ + if (ret != TMF_RESP_FUNC_COMPLETE) { + BUG_ON(isci_port->isci_host == NULL); + + dev_err(&isci_port->isci_host->pdev->dev, + "%s: isci_port = %p; hard reset failed " + "(0x%x) - sending link down to libsas for phy %p\n", + __func__, + isci_port, + isci_port->hard_reset_status, + isci_phy); + + isci_port_link_down(isci_port->isci_host, + isci_phy, + isci_port); + } + + return ret; +} diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h new file mode 100644 index 0000000..b01b0c6 --- /dev/null +++ b/drivers/scsi/isci/port.h @@ -0,0 +1,153 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the isci_port object definition. + * + * port.h + */ + +#if !defined(_ISCI_PORT_H_) +#define _ISCI_PORT_H_ + +struct isci_phy; +struct isci_host; + + +enum isci_status { + isci_freed = 0x00, + isci_starting = 0x01, + isci_ready = 0x02, + isci_ready_for_io = 0x03, + isci_stopping = 0x04, + isci_stopped = 0x05, + isci_host_quiesce = 0x06 +}; + +/** + * struct isci_port - This class represents the port object used to internally + * represent libsas port objects. It also keeps a list of remote device + * objects. + * + * + */ +struct isci_port { + + struct scic_sds_port *sci_port_handle; + + enum isci_status status; + struct isci_host *isci_host; + struct asd_sas_port sas_port; + struct list_head remote_dev_list; + spinlock_t remote_device_lock; + spinlock_t state_lock; + struct list_head domain_dev_list; + struct completion start_complete; + struct completion hard_reset_complete; + enum sci_status hard_reset_status; +}; + +#define to_isci_port(p) \ + container_of(p, struct isci_port, sas_port); + +enum isci_status isci_port_get_state( + struct isci_port *isci_port); + + + +void isci_port_formed( + struct asd_sas_phy *); + +void isci_port_deformed( + struct asd_sas_phy *); + +void isci_port_bc_change_received( + struct isci_host *isci_host, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +void isci_port_link_up( + struct isci_host *isci_host, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +void isci_port_link_down( + struct isci_host *isci_host, + struct isci_phy *isci_phy, + struct isci_port *port); + +void isci_port_ready( + struct isci_host *isci_host, + struct isci_port *isci_port); + +void isci_port_not_ready( + struct isci_host *isci_host, + struct isci_port *port); + +void isci_port_init( + struct isci_port *port, + struct isci_host *host, + int index); + +void isci_port_hard_reset_complete( + struct isci_port *isci_port, + enum sci_status completion_status); + +int isci_port_perform_hard_reset( + struct isci_port *isci_port_ptr, + struct isci_phy *isci_phy_ptr); + +#endif /* !defined(_ISCI_PORT_H_) */ + diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c new file mode 100644 index 0000000..dbf3c82 --- /dev/null +++ b/drivers/scsi/isci/remote_device.c @@ -0,0 +1,698 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "scic_io_request.h" +#include "scic_remote_device.h" +#include "scic_phy.h" +#include "scic_port.h" +#include "port.h" +#include "remote_device.h" +#include "request.h" +#include "task.h" + + + +/** + * isci_remote_device_deconstruct() - This function frees an isci_remote_device. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device to be freed. + * + */ +static void isci_remote_device_deconstruct( + struct isci_host *isci_host, + struct isci_remote_device *isci_device) +{ + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + /* There should not be any outstanding io's. All paths to + * here should go through isci_remote_device_nuke_requests. + * If we hit this condition, we will need a way to complete + * io requests in process */ + while (!list_empty(&isci_device->reqs_in_process)) { + + dev_err(&isci_host->pdev->dev, + "%s: ** request list not empty! **\n", __func__); + BUG(); + } + + /* Remove all related references to this device and free + * the cache object. + */ + scic_remote_device_destruct(isci_device->sci_device_handle); + isci_device->domain_dev->lldd_dev = NULL; + list_del(&isci_device->node); + kmem_cache_free(isci_kmem_cache, isci_device); +} + + +/** + * isci_remote_device_construct() - This function calls the scic remote device + * construct and start functions, it waits on the remote device start + * completion. + * @port: This parameter specifies the isci port with the remote device. + * @isci_device: This parameter specifies the isci remote device + * + * status from the scic calls, the caller to this function should clean up + * resources as appropriate. + */ +static enum sci_status isci_remote_device_construct( + struct isci_port *port, + struct isci_remote_device *isci_device) +{ + enum sci_status status = SCI_SUCCESS; + + /* let the core do it's common constuction. */ + scic_remote_device_construct(port->sci_port_handle, + isci_device->sci_device_handle); + + /* let the core do it's device specific constuction. */ + if (isci_device->domain_dev->parent && + (isci_device->domain_dev->parent->dev_type == EDGE_DEV)) { + int i; + + /* struct smp_response_discover discover_response; */ + struct discover_resp discover_response; + struct domain_device *parent = + isci_device->domain_dev->parent; + + struct expander_device *parent_ex = &parent->ex_dev; + + for (i = 0; i < parent_ex->num_phys; i++) { + + struct ex_phy *phy = &parent_ex->ex_phy[i]; + + if ((phy->phy_state == PHY_VACANT) || + (phy->phy_state == PHY_NOT_PRESENT)) + continue; + + if (SAS_ADDR(phy->attached_sas_addr) + == SAS_ADDR(isci_device->domain_dev->sas_addr)) { + + discover_response.attached_dev_type + = phy->attached_dev_type; + discover_response.linkrate + = phy->linkrate; + discover_response.attached_sata_host + = phy->attached_sata_host; + discover_response.attached_sata_dev + = phy->attached_sata_dev; + discover_response.attached_sata_ps + = phy->attached_sata_ps; + discover_response.iproto + = phy->attached_iproto >> 1; + discover_response.tproto + = phy->attached_tproto >> 1; + memcpy( + discover_response.attached_sas_addr, + phy->attached_sas_addr, + SAS_ADDR_SIZE + ); + discover_response.attached_phy_id + = phy->attached_phy_id; + discover_response.change_count + = phy->phy_change_count; + discover_response.routing_attr + = phy->routing_attr; + discover_response.hmin_linkrate + = phy->phy->minimum_linkrate_hw; + discover_response.hmax_linkrate + = phy->phy->maximum_linkrate_hw; + discover_response.pmin_linkrate + = phy->phy->minimum_linkrate; + discover_response.pmax_linkrate + = phy->phy->maximum_linkrate; + } + } + + + dev_dbg(&port->isci_host->pdev->dev, + "%s: parent->dev_type = EDGE_DEV\n", + __func__); + + status = scic_remote_device_ea_construct( + isci_device->sci_device_handle, + (struct smp_response_discover *)&discover_response + ); + + } else + status = scic_remote_device_da_construct( + isci_device->sci_device_handle + ); + + + if (status != SCI_SUCCESS) { + dev_dbg(&port->isci_host->pdev->dev, + "%s: scic_remote_device_da_construct failed - " + "isci_device = %p\n", + __func__, + isci_device); + + return status; + } + + sci_object_set_association( + isci_device->sci_device_handle, + isci_device + ); + + BUG_ON(port->isci_host == NULL); + + /* start the device. */ + status = scic_remote_device_start( + isci_device->sci_device_handle, + ISCI_REMOTE_DEVICE_START_TIMEOUT + ); + + if (status != SCI_SUCCESS) { + dev_warn(&port->isci_host->pdev->dev, + "%s: scic_remote_device_start failed\n", + __func__); + return status; + } + + return status; +} + + +/** + * isci_remote_device_nuke_requests() - This function terminates all requests + * for a given remote device. + * @isci_device: This parameter specifies the remote device + * + */ +void isci_remote_device_nuke_requests( + struct isci_remote_device *isci_device) +{ + DECLARE_COMPLETION_ONSTACK(aborted_task_completion); + struct isci_host *isci_host; + + isci_host = isci_device->isci_port->isci_host; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + /* Cleanup all requests pending for this device. */ + isci_terminate_pending_requests(isci_host, isci_device, terminating); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p, done\n", __func__, isci_device); +} + + + +/** + * This function builds the isci_remote_device when a libsas dev_found message + * is received. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the isci_port conected to this device. + * + * pointer to new isci_remote_device. + */ +static struct isci_remote_device * +isci_remote_device_alloc(struct isci_host *isci_host, struct isci_port *port) +{ + struct isci_remote_device *isci_device; + struct scic_sds_remote_device *sci_dev; + + isci_device = kmem_cache_zalloc(isci_kmem_cache, GFP_KERNEL); + + if (!isci_device) { + dev_warn(&isci_host->pdev->dev, "%s: failed\n", __func__); + return NULL; + } + + sci_dev = (struct scic_sds_remote_device *) &isci_device[1]; + isci_device->sci_device_handle = sci_dev; + INIT_LIST_HEAD(&isci_device->reqs_in_process); + INIT_LIST_HEAD(&isci_device->node); + isci_device->host_quiesce = false; + + spin_lock_init(&isci_device->state_lock); + spin_lock_init(&isci_device->host_quiesce_lock); + isci_remote_device_change_state(isci_device, isci_freed); + + return isci_device; + +} +/** + * isci_device_set_host_quiesce_lock_state() - This function sets the host I/O + * quiesce lock state for the remote_device object. + * @isci_device,: This parameter points to the isci_remote_device object + * @isci_device: This parameter specifies the new quiesce state. + * + */ +void isci_device_set_host_quiesce_lock_state( + struct isci_remote_device *isci_device, + bool lock_state) +{ + unsigned long flags; + + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + "%s: isci_device=%p, lock_state=%d\n", + __func__, isci_device, lock_state); + + spin_lock_irqsave(&isci_device->host_quiesce_lock, flags); + isci_device->host_quiesce = lock_state; + spin_unlock_irqrestore(&isci_device->host_quiesce_lock, flags); +} + +/** + * isci_remote_device_ready() - This function is called by the scic when the + * remote device is ready. We mark the isci device as ready and signal the + * waiting proccess. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device + * + */ +void isci_remote_device_ready(struct isci_remote_device *isci_device) +{ + unsigned long flags; + + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + /* device ready is actually a "ready for io" state. */ + if ((isci_starting == isci_remote_device_get_state(isci_device)) || + (isci_ready == isci_remote_device_get_state(isci_device))) { + spin_lock_irqsave(&isci_device->isci_port->remote_device_lock, + flags); + isci_remote_device_change_state(isci_device, isci_ready_for_io); + if (isci_device->completion) + complete(isci_device->completion); + spin_unlock_irqrestore( + &isci_device->isci_port->remote_device_lock, + flags); + } + +} + +/** + * isci_remote_device_not_ready() - This function is called by the scic when + * the remote device is not ready. We mark the isci device as ready (not + * "ready_for_io") and signal the waiting proccess. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device + * + */ +void isci_remote_device_not_ready( + struct isci_remote_device *isci_device, + u32 reason_code) +{ + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + if (reason_code == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) + isci_remote_device_change_state(isci_device, isci_stopping); + else + /* device ready is actually a "not ready for io" state. */ + isci_remote_device_change_state(isci_device, isci_ready); +} + +/** + * isci_remote_device_stop_complete() - This function is called by the scic + * when the remote device stop has completed. We mark the isci device as not + * ready and remove the isci remote device. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device. + * @status: This parameter specifies status of the completion. + * + */ +void isci_remote_device_stop_complete( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + enum sci_status status) +{ + struct completion *completion = isci_device->completion; + + dev_dbg(&isci_host->pdev->dev, + "%s: complete isci_device = %p, status = 0x%x\n", + __func__, + isci_device, + status); + + isci_remote_device_change_state(isci_device, isci_stopped); + + /* after stop, we can tear down resources. */ + isci_remote_device_deconstruct(isci_host, isci_device); + + /* notify interested parties. */ + if (completion) + complete(completion); +} + +/** + * isci_remote_device_start_complete() - This function is called by the scic + * when the remote device start has completed + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device. + * @status: This parameter specifies status of the completion. + * + */ +void isci_remote_device_start_complete( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + enum sci_status status) +{ + + +} + + +/** + * isci_remote_device_stop() - This function is called internally to stop the + * remote device. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device. + * + * The status of the scic request to stop. + */ +enum sci_status isci_remote_device_stop( + struct isci_remote_device *isci_device) +{ + enum sci_status status; + unsigned long flags; + + DECLARE_COMPLETION_ONSTACK(completion); + + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + isci_remote_device_change_state(isci_device, isci_stopping); + + /* We need comfirmation that stop completed. */ + isci_device->completion = &completion; + + BUG_ON(isci_device->isci_port == NULL); + BUG_ON(isci_device->isci_port->isci_host == NULL); + + spin_lock_irqsave(&isci_device->isci_port->isci_host->scic_lock, flags); + + status = scic_remote_device_stop( + isci_device->sci_device_handle, + 50 + ); + + spin_unlock_irqrestore(&isci_device->isci_port->isci_host->scic_lock, flags); + + /* Wait for the stop complete callback. */ + if (status == SCI_SUCCESS) + wait_for_completion(&completion); + + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + "%s: isci_device = %p - after completion wait\n", + __func__, isci_device); + + isci_device->completion = NULL; + return status; +} + +/** + * isci_remote_device_gone() - This function is called by libsas when a domain + * device is removed. + * @domain_device: This parameter specifies the libsas domain device. + * + */ +void isci_remote_device_gone( + struct domain_device *domain_dev) +{ + struct isci_remote_device *isci_device = isci_dev_from_domain_dev( + domain_dev); + + dev_err(&isci_device->isci_port->isci_host->pdev->dev, + "%s: domain_device = %p, isci_device = %p, isci_port = %p\n", + __func__, domain_dev, isci_device, isci_device->isci_port); + + if (isci_device != NULL) + isci_remote_device_stop(isci_device); +} + + +/** + * isci_remote_device_found() - This function is called by libsas when a remote + * device is discovered. A remote device object is created and started. the + * function then sleeps until the sci core device started message is + * received. + * @domain_device: This parameter specifies the libsas domain device. + * + * status, zero indicates success. + */ +int isci_remote_device_found(struct domain_device *domain_dev) +{ + unsigned long flags; + struct isci_host *isci_host; + struct isci_port *isci_port; + struct isci_phy *isci_phy; + struct asd_sas_port *sas_port; + struct asd_sas_phy *sas_phy; + struct isci_remote_device *isci_device; + enum sci_status status; + DECLARE_COMPLETION_ONSTACK(completion); + + isci_host = isci_host_from_sas_ha(domain_dev->port->ha); + + dev_dbg(&isci_host->pdev->dev, + "%s: domain_device = %p\n", __func__, domain_dev); + + sas_port = domain_dev->port; + sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy, + port_phy_el); + isci_phy = to_isci_phy(sas_phy); + isci_port = isci_phy->isci_port; + + /* we are being called for a device on this port, + * so it has to come up eventually + */ + wait_for_completion(&isci_port->start_complete); + + if ((isci_stopping == isci_port_get_state(isci_port)) || + (isci_stopped == isci_port_get_state(isci_port))) + return -ENODEV; + + isci_device = isci_remote_device_alloc(isci_host, isci_port); + + INIT_LIST_HEAD(&isci_device->node); + domain_dev->lldd_dev = isci_device; + isci_device->domain_dev = domain_dev; + isci_device->isci_port = isci_port; + isci_remote_device_change_state(isci_device, isci_starting); + + + spin_lock_irqsave(&isci_port->remote_device_lock, flags); + list_add_tail(&isci_device->node, &isci_port->remote_dev_list); + + /* for the device ready event. */ + isci_device->completion = &completion; + + status = isci_remote_device_construct(isci_port, isci_device); + + spin_unlock_irqrestore(&isci_port->remote_device_lock, flags); + + /* wait for the device ready callback. */ + wait_for_completion(isci_device->completion); + isci_device->completion = NULL; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", + __func__, isci_device); + + if (status != SCI_SUCCESS) { + + spin_lock_irqsave(&isci_port->remote_device_lock, flags); + isci_remote_device_deconstruct( + isci_host, + isci_device + ); + spin_unlock_irqrestore(&isci_port->remote_device_lock, flags); + return -ENODEV; + } + + wait_for_completion(&isci_host->start_complete); + + return 0; +} +/** + * isci_device_is_reset_pending() - This function will check if there is any + * pending reset condition on the device. + * @request: This parameter is the isci_device object. + * + * true if there is a reset pending for the device. + */ +bool isci_device_is_reset_pending( + struct isci_host *isci_host, + struct isci_remote_device *isci_device) +{ + struct isci_request *isci_request; + struct isci_request *tmp_req; + bool reset_is_pending = false; + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Check for reset on all pending requests. */ + list_for_each_entry_safe(isci_request, tmp_req, + &isci_device->reqs_in_process, dev_node) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p request = %p\n", + __func__, isci_device, isci_request); + + if (isci_request->ttype == io_task) { + + unsigned long flags; + struct sas_task *task = isci_request_access_task( + isci_request); + + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + reset_is_pending = true; + spin_unlock_irqrestore(&task->task_state_lock, flags); + } + } + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p reset_is_pending = %d\n", + __func__, isci_device, reset_is_pending); + + return reset_is_pending; +} + +/** + * isci_device_clear_reset_pending() - This function will clear if any pending + * reset condition flags on the device. + * @request: This parameter is the isci_device object. + * + * true if there is a reset pending for the device. + */ +void isci_device_clear_reset_pending(struct isci_remote_device *isci_device) +{ + struct isci_request *isci_request; + struct isci_request *tmp_req; + struct isci_host *isci_host = NULL; + unsigned long flags = 0; + + /* FIXME more port gone confusion, and this time it makes the + * locking "fun" + */ + if (isci_device->isci_port != NULL) + isci_host = isci_device->isci_port->isci_host; + + /* + * FIXME when the isci_host gets sorted out + * use dev_dbg() + */ + pr_debug("%s: isci_device=%p, isci_host=%p\n", + __func__, isci_device, isci_host); + + if (isci_host != NULL) + spin_lock_irqsave(&isci_host->scic_lock, flags); + else + pr_err("%s: isci_device %p; isci_host == NULL!\n", + __func__, isci_device); + + /* Clear reset pending on all pending requests. */ + list_for_each_entry_safe(isci_request, tmp_req, + &isci_device->reqs_in_process, dev_node) { + /* + * FIXME when the conditional spinlock is gone + * change to dev_dbg() + */ + pr_debug("%s: isci_device = %p request = %p\n", + __func__, isci_device, isci_request); + + if (isci_request->ttype == io_task) { + + unsigned long flags2; + struct sas_task *task = isci_request_access_task( + isci_request); + + spin_lock_irqsave(&task->task_state_lock, flags2); + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags2); + } + } + + if (isci_host != NULL) + spin_unlock_irqrestore(&isci_host->scic_lock, flags); +} + +/** + * isci_remote_device_change_state() - This function gets the status of the + * remote_device object. + * @isci_device: This parameter points to the isci_remote_device object + * + * status of the object as a isci_status enum. + */ +void isci_remote_device_change_state( + struct isci_remote_device *isci_device, + enum isci_status status) +{ + unsigned long flags; + + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + "%s: isci_device = %p, state = 0x%x", + __func__, + isci_device, + status); + + spin_lock_irqsave(&isci_device->state_lock, flags); + isci_device->status = status; + spin_unlock_irqrestore(&isci_device->state_lock, flags); +} diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h new file mode 100644 index 0000000..a208f81 --- /dev/null +++ b/drivers/scsi/isci/remote_device.h @@ -0,0 +1,154 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if !defined(_ISCI_REMOTE_DEVICE_H_) +#define _ISCI_REMOTE_DEVICE_H_ +#include "scic_user_callback.h" + +struct isci_host; +struct scic_sds_remote_device; + +struct isci_remote_device { + struct scic_sds_remote_device *sci_device_handle; + enum isci_status status; + struct isci_port *isci_port; + struct domain_device *domain_dev; + struct completion *completion; + struct list_head node; + struct list_head reqs_in_process; + struct work_struct stop_work; + spinlock_t state_lock; + spinlock_t host_quiesce_lock; + bool host_quiesce; +}; + +#define to_isci_remote_device(p) \ + container_of(p, struct isci_remote_device, sci_remote_device); + +#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 + + +/** + * This function gets the status of the remote_device object. + * @isci_device: This parameter points to the isci_remote_device object + * + * status of the object as a isci_status enum. + */ +static inline +enum isci_status isci_remote_device_get_state( + struct isci_remote_device *isci_device) +{ + return (isci_device->host_quiesce) + ? isci_host_quiesce + : isci_device->status; +} + + +/** + * isci_dev_from_domain_dev() - This accessor retrieves the remote_device + * object reference from the Linux domain_device reference. + * @domdev,: This parameter points to the Linux domain_device object . + * + * A reference to the associated isci remote device. + */ +#define isci_dev_from_domain_dev(domdev) \ + ((struct isci_remote_device *)(domdev)->lldd_dev) + +void isci_remote_device_start_complete( + struct isci_host *, + struct isci_remote_device *, + enum sci_status); + +void isci_remote_device_stop_complete( + struct isci_host *, + struct isci_remote_device *, + enum sci_status); + +enum sci_status isci_remote_device_stop( + struct isci_remote_device *isci_device); + +void isci_remote_device_nuke_requests( + struct isci_remote_device *isci_device); + +void isci_remote_device_ready( + struct isci_remote_device *); + +void isci_remote_device_not_ready( + struct isci_remote_device *, + u32); + +void isci_remote_device_gone( + struct domain_device *domain_dev); + +int isci_remote_device_found( + struct domain_device *domain_dev); + +bool isci_device_is_reset_pending( + struct isci_host *isci_host, + struct isci_remote_device *isci_device); + +void isci_device_clear_reset_pending( + struct isci_remote_device *isci_device); + +void isci_device_set_host_quiesce_lock_state( + struct isci_remote_device *isci_device, + bool lock_state); + +void isci_remote_device_change_state( + struct isci_remote_device *isci_device, + enum isci_status status); + +#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ + diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c new file mode 100644 index 0000000..e564121 --- /dev/null +++ b/drivers/scsi/isci/request.c @@ -0,0 +1,1472 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "scic_remote_device.h" +#include "scic_io_request.h" +#include "scic_task_request.h" +#include "scic_port.h" +#include "task.h" +#include "request.h" +#include "sata.h" +#include "scu_completion_codes.h" + + +static enum sci_status isci_request_ssp_request_construct( + struct isci_request *request) +{ + enum sci_status status; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p\n", + __func__, + request); + status = scic_io_request_construct_basic_ssp( + request->sci_request_handle + ); + return status; +} + +static enum sci_status isci_request_stp_request_construct( + struct isci_request *request) +{ + struct sas_task *task = isci_request_access_task(request); + enum sci_status status; + struct host_to_dev_fis *register_fis; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p\n", + __func__, + request); + + /* Get the host_to_dev_fis from the core and copy + * the fis from the task into it. + */ + register_fis = isci_sata_task_to_fis_copy(task); + + status = scic_io_request_construct_basic_sata( + request->sci_request_handle + ); + + /* Set the ncq tag in the fis, from the queue + * command in the task. + */ + if (isci_sata_is_task_ncq(task)) { + + isci_sata_set_ncq_tag( + register_fis, + task + ); + } + + return status; +} + +/** + * isci_smp_request_build() - This function builds the smp request object. + * @isci_host: This parameter specifies the ISCI host object + * @request: This parameter points to the isci_request object allocated in the + * request construct function. + * @sci_device: This parameter is the handle for the sci core's remote device + * object that is the destination for this request. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_smp_request_build( + struct isci_request *request) +{ + enum sci_status status = SCI_FAILURE; + struct sas_task *task = isci_request_access_task(request); + + void *command_iu_address = + scic_io_request_get_command_iu_address( + request->sci_request_handle + ); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p\n", + __func__, + request); + dev_dbg(&request->isci_host->pdev->dev, + "%s: smp_req len = %d\n", + __func__, + task->smp_task.smp_req.length); + + /* copy the smp_command to the address; */ + sg_copy_to_buffer(&task->smp_task.smp_req, 1, + (char *)command_iu_address, + sizeof(struct smp_request) + ); + + status = scic_io_request_construct_smp(request->sci_request_handle); + if (status != SCI_SUCCESS) + dev_warn(&request->isci_host->pdev->dev, + "%s: scic_io_request_construct_smp failed with " + "status = %d\n", + __func__, + status); + + return status; +} + +/** + * isci_io_request_build() - This function builds the io request object. + * @isci_host: This parameter specifies the ISCI host object + * @request: This parameter points to the isci_request object allocated in the + * request construct function. + * @sci_device: This parameter is the handle for the sci core's remote device + * object that is the destination for this request. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_io_request_build( + struct isci_host *isci_host, + struct isci_request *request, + struct isci_remote_device *isci_device) +{ + struct smp_discover_response_protocols dev_protocols; + enum sci_status status = SCI_SUCCESS; + struct sas_task *task = isci_request_access_task(request); + struct scic_sds_remote_device *sci_device = + isci_device->sci_device_handle; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = 0x%p; request = %p, " + "num_scatter = %d\n", + __func__, + isci_device, + request, + task->num_scatter); + + /* map the sgl addresses, if present. + * libata does the mapping for sata devices + * before we get the request. + */ + if (task->num_scatter && + !sas_protocol_ata(task->task_proto) && + !(SAS_PROTOCOL_SMP & task->task_proto)) { + + request->num_sg_entries = dma_map_sg( + &isci_host->pdev->dev, + task->scatter, + task->num_scatter, + task->data_dir + ); + + if (request->num_sg_entries == 0) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + } + + /* build the common request object. For now, + * we will let the core allocate the IO tag. + */ + status = scic_io_request_construct( + isci_host->core_controller, + sci_device, + SCI_CONTROLLER_INVALID_IO_TAG, + request, + request->sci_request_mem_ptr, + (struct scic_sds_request **)&request->sci_request_handle + ); + + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: failed request construct\n", + __func__); + return SCI_FAILURE; + } + + sci_object_set_association(request->sci_request_handle, request); + + /* Determine protocol and call the appropriate basic constructor */ + scic_remote_device_get_protocols(sci_device, &dev_protocols); + if (dev_protocols.u.bits.attached_ssp_target) + status = isci_request_ssp_request_construct(request); + else if (dev_protocols.u.bits.attached_stp_target) + status = isci_request_stp_request_construct(request); + else if (dev_protocols.u.bits.attached_smp_target) + status = isci_smp_request_build(request); + else { + dev_warn(&isci_host->pdev->dev, + "%s: unknown protocol\n", __func__); + return SCI_FAILURE; + } + + return SCI_SUCCESS; +} + + +/** + * isci_request_alloc_core() - This function gets the request object from the + * isci_host dma cache. + * @isci_host: This parameter specifies the ISCI host object + * @isci_request: This parameter will contain the pointer to the new + * isci_request object. + * @isci_device: This parameter is the pointer to the isci remote device object + * that is the destination for this request. + * @gfp_flags: This parameter specifies the os allocation flags. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static int isci_request_alloc_core( + struct isci_host *isci_host, + struct isci_request **isci_request, + struct isci_remote_device *isci_device, + gfp_t gfp_flags) +{ + int ret = 0; + dma_addr_t handle; + struct isci_request *request; + + + /* get pointer to dma memory. This actually points + * to both the isci_remote_device object and the + * sci object. The isci object is at the beginning + * of the memory allocated here. + */ + request = dma_pool_alloc(isci_host->dma_pool, gfp_flags, &handle); + if (!request) { + dev_warn(&isci_host->pdev->dev, + "%s: dma_pool_alloc returned NULL\n", __func__); + return -ENOMEM; + } + + /* initialize the request object. */ + spin_lock_init(&request->state_lock); + isci_request_change_state(request, allocated); + request->sci_request_mem_ptr = ((u8 *)request) + + sizeof(struct isci_request); + request->request_daddr = handle; + request->isci_host = isci_host; + request->isci_device = isci_device; + request->io_request_completion = NULL; + + request->request_alloc_size = isci_host->dma_pool_alloc_size; + request->num_sg_entries = 0; + + request->complete_in_target = false; + + INIT_LIST_HEAD(&request->completed_node); + INIT_LIST_HEAD(&request->dev_node); + + *isci_request = request; + + return ret; +} + +static int isci_request_alloc_io( + struct isci_host *isci_host, + struct sas_task *task, + struct isci_request **isci_request, + struct isci_remote_device *isci_device, + gfp_t gfp_flags) +{ + int retval = isci_request_alloc_core(isci_host, isci_request, + isci_device, gfp_flags); + + if (!retval) { + (*isci_request)->ttype_ptr.io_task_ptr = task; + (*isci_request)->ttype = io_task; + + task->lldd_task = *isci_request; + } + return retval; +} + +/** + * isci_request_alloc_tmf() - This function gets the request object from the + * isci_host dma cache and initializes the relevant fields as a sas_task. + * @isci_host: This parameter specifies the ISCI host object + * @sas_task: This parameter is the task struct from the upper layer driver. + * @isci_request: This parameter will contain the pointer to the new + * isci_request object. + * @isci_device: This parameter is the pointer to the isci remote device object + * that is the destination for this request. + * @gfp_flags: This parameter specifies the os allocation flags. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +int isci_request_alloc_tmf( + struct isci_host *isci_host, + struct isci_tmf *isci_tmf, + struct isci_request **isci_request, + struct isci_remote_device *isci_device, + gfp_t gfp_flags) +{ + int retval = isci_request_alloc_core(isci_host, isci_request, + isci_device, gfp_flags); + + if (!retval) { + + (*isci_request)->ttype_ptr.tmf_task_ptr = isci_tmf; + (*isci_request)->ttype = tmf_task; + } + return retval; +} + +/** + * isci_request_signal_device_reset() - This function will set the "device + * needs target reset" flag in the given sas_tasks' task_state_flags, and + * then cause the task to be added into the SCSI error handler queue which + * will eventually be escalated to a target reset. + * + * + */ +static void isci_request_signal_device_reset( + struct isci_request *isci_request) +{ + unsigned long flags; + struct sas_task *task = isci_request_access_task(isci_request); + + dev_dbg(&isci_request->isci_host->pdev->dev, + "%s: request=%p, task=%p\n", __func__, isci_request, task); + + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Cause this task to be scheduled in the SCSI error handler + * thread. + */ + sas_task_abort(task); +} + +/** + * isci_request_execute() - This function allocates the isci_request object, + * all fills in some common fields. + * @isci_host: This parameter specifies the ISCI host object + * @sas_task: This parameter is the task struct from the upper layer driver. + * @isci_request: This parameter will contain the pointer to the new + * isci_request object. + * @gfp_flags: This parameter specifies the os allocation flags. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +int isci_request_execute( + struct isci_host *isci_host, + struct sas_task *task, + struct isci_request **isci_request, + gfp_t gfp_flags) +{ + int ret = 0; + struct scic_sds_remote_device *sci_device; + enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + struct isci_remote_device *isci_device; + struct isci_request *request; + unsigned long flags; + + isci_device = isci_dev_from_domain_dev(task->dev); + sci_device = isci_device->sci_device_handle; + + /* do common allocation and init of request object. */ + ret = isci_request_alloc_io( + isci_host, + task, + &request, + isci_device, + gfp_flags + ); + + if (ret) + goto out; + + status = isci_io_request_build(isci_host, request, isci_device); + if (status == SCI_SUCCESS) { + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* send the request, let the core assign the IO TAG. */ + status = scic_controller_start_io( + isci_host->core_controller, + sci_device, + request->sci_request_handle, + SCI_CONTROLLER_INVALID_IO_TAG + ); + + if (status == SCI_SUCCESS || + status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + + /* Either I/O started OK, or the core has signaled that + * the device needs a target reset. + * + * In either case, hold onto the I/O for later. + * + * Update it's status and add it to the list in the + * remote device object. + */ + isci_request_change_state(request, started); + list_add(&request->dev_node, + &isci_device->reqs_in_process); + + if (status == + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* Signal libsas that we need the SCSI error + * handler thread to work on this I/O and that + * we want a device reset. + */ + isci_request_signal_device_reset(request); + + /* Change the status, since we are holding + * the I/O until it is managed by the SCSI + * error handler. + */ + status = SCI_SUCCESS; + } + } else + dev_warn(&isci_host->pdev->dev, + "%s: failed request start\n", + __func__); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + } else + dev_warn(&isci_host->pdev->dev, + "%s: request_construct failed - status = 0x%x\n", + __func__, + status); + + out: + if (status != SCI_SUCCESS) { + + /* release dma memory on failure. */ + isci_request_free(isci_host, request); + request = NULL; + ret = SCI_FAILURE; + } + + *isci_request = request; + return ret; +} + + +/** + * isci_request_process_response_iu() - This function sets the status and + * response iu, in the task struct, from the request object for the upper + * layer driver. + * @sas_task: This parameter is the task struct from the upper layer driver. + * @resp_iu: This parameter points to the response iu of the completed request. + * @dev: This parameter specifies the linux device struct. + * + * none. + */ +static void isci_request_process_response_iu( + struct sas_task *task, + struct ssp_response_iu *resp_iu, + struct device *dev) +{ + dev_dbg(dev, + "%s: resp_iu = %p " + "resp_iu->status = 0x%x,\nresp_iu->datapres = %d " + "resp_iu->response_data_len = %x, " + "resp_iu->sense_data_len = %x\nrepsonse data: ", + __func__, + resp_iu, + resp_iu->status, + resp_iu->datapres, + resp_iu->response_data_len, + resp_iu->sense_data_len); + + task->task_status.stat = resp_iu->status; + + /* libsas updates the task status fields based on the response iu. */ + sas_ssp_task_response(dev, task, resp_iu); +} + +/** + * isci_request_set_open_reject_status() - This function prepares the I/O + * completion for OPEN_REJECT conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @complete_to_host_ptr: This parameter specifies the action to be taken by + * the LLDD with respect to completing this request or forcing an abort + * condition on the I/O. + * @open_rej_reason: This parameter specifies the encoded reason for the + * abandon-class reject. + * + * none. + */ +static void isci_request_set_open_reject_status( + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum isci_completion_selection *complete_to_host_ptr, + enum sas_open_rej_reason open_rej_reason) +{ + /* Task in the target is done. */ + request->complete_in_target = true; + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAS_OPEN_REJECT; + *complete_to_host_ptr = isci_perform_normal_io_completion; + task->task_status.open_rej_reason = open_rej_reason; +} + +/** + * isci_request_handle_controller_specific_errors() - This function decodes + * controller-specific I/O completion error conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @complete_to_host_ptr: This parameter specifies the action to be taken by + * the LLDD with respect to completing this request or forcing an abort + * condition on the I/O. + * + * none. + */ +static void isci_request_handle_controller_specific_errors( + struct isci_remote_device *isci_device, + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum isci_completion_selection *complete_to_host_ptr) +{ + unsigned int cstatus; + + cstatus = scic_request_get_controller_status( + request->sci_request_handle + ); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR " + "- controller status = 0x%x\n", + __func__, request, cstatus); + + /* Decode the controller-specific errors; most + * important is to recognize those conditions in which + * the target may still have a task outstanding that + * must be aborted. + * + * Note that there are SCU completion codes being + * named in the decode below for which SCIC has already + * done work to handle them in a way other than as + * a controller-specific completion code; these are left + * in the decode below for completeness sake. + */ + switch (cstatus) { + case SCU_TASK_DONE_DMASETUP_DIRERR: + /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */ + case SCU_TASK_DONE_XFERCNT_ERR: + /* Also SCU_TASK_DONE_SMP_UFI_ERR: */ + if (task->task_proto == SAS_PROTOCOL_SMP) { + /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */ + *response_ptr = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; + + request->complete_in_target = true; + + *complete_to_host_ptr = + isci_perform_normal_io_completion; + } else { + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAM_STAT_TASK_ABORTED; + + request->complete_in_target = false; + + *complete_to_host_ptr = + isci_perform_error_io_completion; + } + + break; + + case SCU_TASK_DONE_CRC_ERR: + case SCU_TASK_DONE_NAK_CMD_ERR: + case SCU_TASK_DONE_EXCESS_DATA: + case SCU_TASK_DONE_UNEXP_FIS: + /* Also SCU_TASK_DONE_UNEXP_RESP: */ + case SCU_TASK_DONE_VIIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_IIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_RNCNV_OUTBOUND: /* TODO - conditions? */ + /* These are conditions in which the target + * has completed the task, so that no cleanup + * is necessary. + */ + *response_ptr = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; + + request->complete_in_target = true; + + *complete_to_host_ptr = isci_perform_normal_io_completion; + break; + + + /* Note that the only open reject completion codes seen here will be + * abandon-class codes; all others are automatically retried in the SCU. + */ + case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_WRONG_DEST); + break; + + case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: + + /* Note - the return of AB0 will change when + * libsas implements detection of zone violations. + */ + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB0); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB1); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB2); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB3); + break; + + case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_BAD_DEST); + break; + + case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_STP_NORES); + break; + + case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_EPROTO); + break; + + case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_CONN_RATE); + break; + + case SCU_TASK_DONE_LL_R_ERR: + /* Also SCU_TASK_DONE_ACK_NAK_TO: */ + case SCU_TASK_DONE_LL_PERR: + case SCU_TASK_DONE_LL_SY_TERM: + /* Also SCU_TASK_DONE_NAK_ERR:*/ + case SCU_TASK_DONE_LL_LF_TERM: + /* Also SCU_TASK_DONE_DATA_LEN_ERR: */ + case SCU_TASK_DONE_LL_ABORT_ERR: + case SCU_TASK_DONE_SEQ_INV_TYPE: + /* Also SCU_TASK_DONE_UNEXP_XR: */ + case SCU_TASK_DONE_XR_IU_LEN_ERR: + case SCU_TASK_DONE_INV_FIS_LEN: + /* Also SCU_TASK_DONE_XR_WD_LEN: */ + case SCU_TASK_DONE_SDMA_ERR: + case SCU_TASK_DONE_OFFSET_ERR: + case SCU_TASK_DONE_MAX_PLD_ERR: + case SCU_TASK_DONE_LF_ERR: + case SCU_TASK_DONE_SMP_RESP_TO_ERR: /* Escalate to dev reset? */ + case SCU_TASK_DONE_SMP_LL_RX_ERR: + case SCU_TASK_DONE_UNEXP_DATA: + case SCU_TASK_DONE_UNEXP_SDBFIS: + case SCU_TASK_DONE_REG_ERR: + case SCU_TASK_DONE_SDB_ERR: + case SCU_TASK_DONE_TASK_ABORT: + default: + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAM_STAT_TASK_ABORTED; + request->complete_in_target = false; + + *complete_to_host_ptr = isci_perform_error_io_completion; + break; + } +} + +/** + * isci_task_save_for_upper_layer_completion() - This function saves the + * request for later completion to the upper layer driver. + * @host: This parameter is a pointer to the host on which the the request + * should be queued (either as an error or success). + * @request: This parameter is the completed request. + * @response: This parameter is the response code for the completed task. + * @status: This parameter is the status code for the completed task. + * + * none. + */ +static void isci_task_save_for_upper_layer_completion( + struct isci_host *host, + struct isci_request *request, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + struct sas_task *task = isci_request_access_task(request); + + isci_task_set_completion_status(task, response, status, + task_notification_selection); + + + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (task_notification_selection) { + + case isci_perform_normal_io_completion: + + /* Normal notification (task_done) */ + dev_dbg(&host->pdev->dev, + "%s: Normal - task = %p, response=%d, status=%d\n", + __func__, + task, + response, + status); + /* Add to the completed list. */ + list_add(&request->completed_node, + &host->requests_to_complete); + break; + + case isci_perform_aborted_io_completion: + /* + * No notification because this request is already + * in the abort path. + */ + dev_warn(&host->pdev->dev, + "%s: Aborted - task = %p, response=%d, status=%d\n", + __func__, + task, + response, + status); + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_warn(&host->pdev->dev, + "%s: Error - task = %p, response=%d, status=%d\n", + __func__, + task, + response, + status); + /* Add to the aborted list. */ + list_add(&request->completed_node, + &host->requests_to_abort); + break; + + default: + dev_warn(&host->pdev->dev, + "%s: Unknown - task = %p, response=%d, status=%d\n", + __func__, + task, + response, + status); + + /* Add to the aborted list. */ + list_add(&request->completed_node, + &host->requests_to_abort); + break; + } +} + +/** + * isci_request_io_request_complete() - This function is called by the sci core + * when an io request completes. + * @isci_host: This parameter specifies the ISCI host object + * @request: This parameter is the completed isci_request object. + * @completion_status: This parameter specifies the completion status from the + * sci core. + * + * none. + */ +void isci_request_io_request_complete( + struct isci_host *isci_host, + struct isci_request *request, + enum sci_io_status completion_status) +{ + struct sas_task *task = isci_request_access_task(request); + struct ssp_response_iu *resp_iu; + void *resp_buf; + unsigned long task_flags; + unsigned long state_flags; + struct completion *io_request_completion; + struct isci_remote_device *isci_device = request->isci_device; + enum service_response response = SAS_TASK_UNDELIVERED; + enum exec_status status = SAS_ABORTED_TASK; + enum isci_request_status request_status; + enum isci_completion_selection complete_to_host + = isci_perform_normal_io_completion; + + dev_dbg(&isci_host->pdev->dev, + "%s: request = %p, task = %p,\n" + "task->data_dir = %d completion_status = 0x%x\n", + __func__, + request, + task, + task->data_dir, + completion_status); + + spin_lock_irqsave(&request->state_lock, state_flags); + request_status = isci_request_get_state(request); + spin_unlock_irqrestore(&request->state_lock, state_flags); + + /* Decode the request status. Note that if the request has been + * aborted by a task management function, we don't care + * what the status is. + */ + switch (request_status) { + + case aborted: + /* "aborted" indicates that the request was aborted by a task + * management function, since once a task management request is + * perfomed by the device, the request only completes because + * of the subsequent driver terminate. + * + * Aborted also means an external thread is explicitly managing + * this request, so that we do not complete it up the stack. + * + * The target is still there (since the TMF was successful). + */ + request->complete_in_target = true; + response = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) + || (isci_device->status == isci_stopped) + ) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_aborted_io_completion; + /* This was an aborted request. */ + break; + + case aborting: + /* aborting means that the task management function tried and + * failed to abort the request. We need to note the request + * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the + * target as down. + * + * Aborting also means an external thread is explicitly managing + * this request, so that we do not complete it up the stack. + */ + request->complete_in_target = true; + response = SAS_TASK_UNDELIVERED; + + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + /* The device has been /is being stopped. Note that + * we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_PHY_DOWN; + + complete_to_host = isci_perform_aborted_io_completion; + + /* This was an aborted request. */ + break; + + case terminating: + + /* This was an terminated request. This happens when + * the I/O is being terminated because of an action on + * the device (reset, tear down, etc.), and the I/O needs + * to be completed up the stack. + */ + request->complete_in_target = true; + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_normal_io_completion; + + /* This was a terminated request. */ + break; + + default: + + /* This is an active request being completed from the core. */ + switch (completion_status) { + + case SCI_IO_FAILURE_RESPONSE_VALID: + dev_dbg(&isci_host->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", + __func__, + request, + task); + + if (sas_protocol_ata(task->task_proto)) { + resp_buf + = scic_stp_io_request_get_d2h_reg_address( + request->sci_request_handle + ); + isci_request_process_stp_response(task, + resp_buf + ); + + } else if (SAS_PROTOCOL_SSP == task->task_proto) { + + /* crack the iu response buffer. */ + resp_iu + = scic_io_request_get_response_iu_address( + request->sci_request_handle + ); + + isci_request_process_response_iu(task, resp_iu, + &isci_host->pdev->dev + ); + + } else if (SAS_PROTOCOL_SMP == task->task_proto) { + + dev_err(&isci_host->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID: " + "SAS_PROTOCOL_SMP protocol\n", + __func__); + + } else + dev_err(&isci_host->pdev->dev, + "%s: unknown protocol\n", __func__); + + /* use the task status set in the task struct by the + * isci_request_process_response_iu call. + */ + request->complete_in_target = true; + response = task->task_status.resp; + status = task->task_status.stat; + break; + + case SCI_IO_SUCCESS: + case SCI_IO_SUCCESS_IO_DONE_EARLY: + + response = SAS_TASK_COMPLETE; + status = SAM_STAT_GOOD; + request->complete_in_target = true; + + if (task->task_proto == SAS_PROTOCOL_SMP) { + + u8 *command_iu_address + = scic_io_request_get_command_iu_address( + request->sci_request_handle + ); + + dev_dbg(&isci_host->pdev->dev, + "%s: SMP protocol completion\n", + __func__); + + sg_copy_from_buffer( + &task->smp_task.smp_resp, 1, + command_iu_address + + sizeof(struct smp_request), + sizeof(struct smp_resp) + ); + } else if (completion_status + == SCI_IO_SUCCESS_IO_DONE_EARLY) { + + /* This was an SSP / STP / SATA transfer. + * There is a possibility that less data than + * the maximum was transferred. + */ + u32 transferred_length + = scic_io_request_get_number_of_bytes_transferred( + request->sci_request_handle); + + task->task_status.residual + = task->total_xfer_len - transferred_length; + + /* If there were residual bytes, call this an + * underrun. + */ + if (task->task_status.residual != 0) + status = SAS_DATA_UNDERRUN; + + dev_dbg(&isci_host->pdev->dev, + "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", + __func__, + status); + + } else + dev_dbg(&isci_host->pdev->dev, + "%s: SCI_IO_SUCCESS\n", + __func__); + + break; + + case SCI_IO_FAILURE_TERMINATED: + dev_dbg(&isci_host->pdev->dev, + "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", + __func__, + request, + task); + + /* The request was terminated explicitly. No handling + * is needed in the SCSI error handler path. + */ + request->complete_in_target = true; + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_normal_io_completion; + break; + + case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: + + isci_request_handle_controller_specific_errors( + isci_device, request, task, &response, &status, + &complete_to_host); + + break; + + case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: + /* This is a special case, in that the I/O completion + * is telling us that the device needs a reset. + * In order for the device reset condition to be + * noticed, the I/O has to be handled in the error + * handler. Set the reset flag and cause the + * SCSI error thread to be scheduled. + */ + spin_lock_irqsave(&task->task_state_lock, task_flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, task_flags); + + complete_to_host = isci_perform_error_io_completion; + request->complete_in_target = false; + break; + + default: + /* Catch any otherwise unhandled error codes here. */ + dev_warn(&isci_host->pdev->dev, + "%s: invalid completion code: 0x%x - " + "isci_request = %p\n", + __func__, completion_status, request); + + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_error_io_completion; + request->complete_in_target = false; + break; + } + break; + } + + isci_request_unmap_sgl(request, isci_host->pdev); + + /* Put the completed request on the correct list */ + isci_task_save_for_upper_layer_completion(isci_host, request, response, + status, complete_to_host + ); + + /* complete the io request to the core. */ + scic_controller_complete_io( + isci_host->core_controller, + isci_device->sci_device_handle, + request->sci_request_handle + ); + /* NULL the request handle so it cannot be completed or + * terminated again, and to cause any calls into abort + * task to recognize the already completed case. + */ + request->sci_request_handle = NULL; + + /* Only remove the request from the remote device list + * of pending requests if we have not requested error + * handling on this request. + */ + if (complete_to_host != isci_perform_error_io_completion) + list_del_init(&request->dev_node); + + + /* Save possible completion ptr. */ + io_request_completion = request->io_request_completion; + + if (io_request_completion) { + + /* This is inherantly a regular I/O request, + * since we are currently in the regular + * I/O completion callback function. + * Signal whoever is waiting that this + * request is complete. + */ + complete(io_request_completion); + } + + isci_host_can_dequeue(isci_host, 1); +} + +/** + * isci_request_io_request_get_transfer_length() - This function is called by + * the sci core to retrieve the transfer length for a given request. + * @request: This parameter is the isci_request object. + * + * length of transfer for specified request. + */ +u32 isci_request_io_request_get_transfer_length(struct isci_request *request) +{ + struct sas_task *task = isci_request_access_task(request); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: total_xfer_len: %d\n", + __func__, + task->total_xfer_len); + return task->total_xfer_len; +} + + +/** + * isci_request_io_request_get_data_direction() - This function is called by + * the sci core to retrieve the data direction for a given request. + * @request: This parameter is the isci_request object. + * + * data direction for specified request. + */ +SCI_IO_REQUEST_DATA_DIRECTION isci_request_io_request_get_data_direction( + struct isci_request *request) +{ + struct sas_task *task = isci_request_access_task(request); + SCI_IO_REQUEST_DATA_DIRECTION ret; + + switch (task->data_dir) { + + case DMA_FROM_DEVICE: + ret = SCI_IO_REQUEST_DATA_IN; + dev_dbg(&request->isci_host->pdev->dev, + "%s: request=%p, FROM_DEVICE\n", + __func__, + request); + break; + + case DMA_TO_DEVICE: + ret = SCI_IO_REQUEST_DATA_OUT; + dev_dbg(&request->isci_host->pdev->dev, + "%s: request=%p, TO_DEVICE\n", + __func__, + request); + break; + + case DMA_BIDIRECTIONAL: + case DMA_NONE: + default: + ret = SCI_IO_REQUEST_NO_DATA; + dev_dbg(&request->isci_host->pdev->dev, + "%s: request=%p, unhandled direction case, " + "data_dir=%d\n", + __func__, + request, + task->data_dir); + break; + + } + return ret; +} + +/** + * isci_request_sge_get_address_field() - This function is called by the sci + * core to retrieve the address field contents for a given sge. + * @request: This parameter is the isci_request object. + * @sge_address: This parameter is the sge. + * + * physical address in the specified sge. + */ +dma_addr_t isci_request_sge_get_address_field( + struct isci_request *request, + void *sge_address) +{ + struct sas_task *task = isci_request_access_task(request); + dma_addr_t ret; + struct isci_host *isci_host = isci_host_from_sas_ha( + task->dev->port->ha); + + dev_dbg(&isci_host->pdev->dev, + "%s: request = %p, sge_address = %p\n", + __func__, + request, + sge_address); + + if (task->data_dir == PCI_DMA_NONE) + return 0; + + /* the case where num_scatter == 0 is special, in that + * task->scatter is the actual buffer address, not an sgl. + * so a map single is required here. + */ + if ((task->num_scatter == 0) && + !sas_protocol_ata(task->task_proto)) { + ret = dma_map_single( + &isci_host->pdev->dev, + task->scatter, + task->total_xfer_len, + task->data_dir + ); + request->zero_scatter_daddr = ret; + } else + ret = sg_dma_address(((struct scatterlist *)sge_address)); + + dev_dbg(&isci_host->pdev->dev, + "%s: bus address = %lx\n", + __func__, + (unsigned long)ret); + + return ret; +} + + +/** + * isci_request_sge_get_length_field() - This function is called by the sci + * core to retrieve the length field contents for a given sge. + * @request: This parameter is the isci_request object. + * @sge_address: This parameter is the sge. + * + * length field value in the specified sge. + */ +u32 isci_request_sge_get_length_field( + struct isci_request *request, + void *sge_address) +{ + struct sas_task *task = isci_request_access_task(request); + int ret; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p, sge_address = %p\n", + __func__, + request, + sge_address); + + if (task->data_dir == PCI_DMA_NONE) + return 0; + + /* the case where num_scatter == 0 is special, in that + * task->scatter is the actual buffer address, not an sgl. + * so we return total_xfer_len here. + */ + if (task->num_scatter == 0) + ret = task->total_xfer_len; + else + ret = sg_dma_len((struct scatterlist *)sge_address); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: len = %d\n", + __func__, + ret); + + return ret; +} + + +/** + * isci_request_ssp_io_request_get_cdb_address() - This function is called by + * the sci core to retrieve the cdb address for a given request. + * @request: This parameter is the isci_request object. + * + * cdb address for specified request. + */ +void *isci_request_ssp_io_request_get_cdb_address( + struct isci_request *request) +{ + struct sas_task *task = isci_request_access_task(request); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request->task->ssp_task.cdb = %p\n", + __func__, + task->ssp_task.cdb); + return task->ssp_task.cdb; +} + + +/** + * isci_request_ssp_io_request_get_cdb_length() - This function is called by + * the sci core to retrieve the cdb length for a given request. + * @request: This parameter is the isci_request object. + * + * cdb length for specified request. + */ +u32 isci_request_ssp_io_request_get_cdb_length( + struct isci_request *request) +{ + return 16; +} + + +/** + * isci_request_ssp_io_request_get_lun() - This function is called by the sci + * core to retrieve the lun for a given request. + * @request: This parameter is the isci_request object. + * + * lun for specified request. + */ +u32 isci_request_ssp_io_request_get_lun( + struct isci_request *request) +{ + struct sas_task *task = isci_request_access_task(request); + +#ifdef DEBUG + int i; + + for (i = 0; i < 8; i++) + dev_dbg(&request->isci_host->pdev->dev, + "%s: request->task->ssp_task.LUN[%d] = %x\n", + __func__, i, request->task->ssp_task.LUN[i]); + +#endif + + return task->ssp_task.LUN[0]; +} + + +/** + * isci_request_ssp_io_request_get_task_attribute() - This function is called + * by the sci core to retrieve the task attribute for a given request. + * @request: This parameter is the isci_request object. + * + * task attribute for specified request. + */ +u32 isci_request_ssp_io_request_get_task_attribute( + struct isci_request *request) +{ + struct sas_task *task = isci_request_access_task(request); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request->task->ssp_task.task_attr = %x\n", + __func__, + task->ssp_task.task_attr); + + return task->ssp_task.task_attr; +} + + +/** + * isci_request_ssp_io_request_get_command_priority() - This function is called + * by the sci core to retrieve the command priority for a given request. + * @request: This parameter is the isci_request object. + * + * command priority for specified request. + */ +u32 isci_request_ssp_io_request_get_command_priority( + struct isci_request *request) +{ + struct sas_task *task = isci_request_access_task(request); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request->task->ssp_task.task_prio = %x\n", + __func__, + task->ssp_task.task_prio); + + return task->ssp_task.task_prio; +} diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h new file mode 100644 index 0000000..5079d4a --- /dev/null +++ b/drivers/scsi/isci/request.h @@ -0,0 +1,429 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if !defined(_ISCI_REQUEST_H_) +#define _ISCI_REQUEST_H_ + +#include "isci.h" + +/** + * struct isci_request_status - This enum defines the possible states of an I/O + * request. + * + * + */ +enum isci_request_status { + unallocated = 0x00, + allocated = 0x01, + started = 0x02, + completed = 0x03, + aborting = 0x04, + aborted = 0x05, + terminating = 0x06 +}; + +enum task_type { + io_task = 0, + tmf_task = 1 +}; + +/** + * struct isci_request - This class represents the request object used to track + * IO, smp and TMF request internal. It wraps the SCIC request object. + * + * + */ +struct isci_request { + + struct scic_sds_request *sci_request_handle; + + enum isci_request_status status; + enum task_type ttype; + unsigned short io_tag; + bool complete_in_target; + + union ttype_ptr_union { + struct sas_task *io_task_ptr; /* When ttype==io_task */ + struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */ + } ttype_ptr; + struct isci_host *isci_host; + struct isci_remote_device *isci_device; + /* For use in the requests_to_{complete|abort} lists: */ + struct list_head completed_node; + /* For use in the reqs_in_process list: */ + struct list_head dev_node; + void *sci_request_mem_ptr; + spinlock_t state_lock; + dma_addr_t request_daddr; + dma_addr_t zero_scatter_daddr; + + unsigned int num_sg_entries; /* returned by pci_alloc_sg */ + unsigned int request_alloc_size; /* size of block from dma_pool_alloc */ + + /** Note: "io_request_completion" is completed in two different ways + * depending on whether this is a TMF or regular request. + * - TMF requests are completed in the thread that started them; + * - regular requests are completed in the request completion callback + * function. + * This difference in operation allows the aborter of a TMF request + * to be sure that once the TMF request completes, the I/O that the + * TMF was aborting is guaranteed to have completed. + */ + struct completion *io_request_completion; +}; + +/** + * This function gets the status of the request object. + * @request: This parameter points to the isci_request object + * + * status of the object as a isci_request_status enum. + */ +static inline +enum isci_request_status isci_request_get_state( + struct isci_request *isci_request) +{ + BUG_ON(isci_request == NULL); + + /*probably a bad sign... */ + if (isci_request->status == unallocated) + dev_warn(&isci_request->isci_host->pdev->dev, + "%s: isci_request->status == unallocated\n", + __func__); + + return isci_request->status; +} + + +/** + * isci_request_change_state() - This function sets the status of the request + * object. + * @request: This parameter points to the isci_request object + * @status: This Parameter is the new status of the object + * + */ +static inline enum isci_request_status isci_request_change_state( + struct isci_request *isci_request, + enum isci_request_status status) +{ + enum isci_request_status old_state; + unsigned long flags; + + dev_dbg(&isci_request->isci_host->pdev->dev, + "%s: isci_request = %p, state = 0x%x\n", + __func__, + isci_request, + status); + + BUG_ON(isci_request == NULL); + + spin_lock_irqsave(&isci_request->state_lock, flags); + old_state = isci_request->status; + isci_request->status = status; + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + return old_state; +} + +/** + * isci_request_change_started_to_newstate() - This function sets the status of + * the request object. + * @request: This parameter points to the isci_request object + * @status: This Parameter is the new status of the object + * + * state previous to any change. + */ +static inline enum isci_request_status isci_request_change_started_to_newstate( + struct isci_request *isci_request, + struct completion *completion_ptr, + enum isci_request_status newstate) +{ + enum isci_request_status old_state; + unsigned long flags; + + BUG_ON(isci_request == NULL); + + spin_lock_irqsave(&isci_request->state_lock, flags); + + old_state = isci_request->status; + + if (old_state == started) { + BUG_ON(isci_request->io_request_completion != NULL); + + isci_request->io_request_completion = completion_ptr; + isci_request->status = newstate; + } + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + dev_dbg(&isci_request->isci_host->pdev->dev, + "%s: isci_request = %p, old_state = 0x%x\n", + __func__, + isci_request, + old_state); + + return old_state; +} + +/** + * isci_request_change_started_to_aborted() - This function sets the status of + * the request object. + * @request: This parameter points to the isci_request object + * @completion_ptr: This parameter is saved as the kernel completion structure + * signalled when the old request completes. + * + * state previous to any change. + */ +static inline enum isci_request_status isci_request_change_started_to_aborted( + struct isci_request *isci_request, + struct completion *completion_ptr) +{ + return isci_request_change_started_to_newstate( + isci_request, completion_ptr, aborted + ); +} +/** + * isci_request_free() - This function frees the request object. + * @isci_host: This parameter specifies the ISCI host object + * @isci_request: This parameter points to the isci_request object + * + */ +static inline void isci_request_free( + struct isci_host *isci_host, + struct isci_request *isci_request) +{ + BUG_ON(isci_request == NULL); + + /* release the dma memory if we fail. */ + dma_pool_free(isci_host->dma_pool, isci_request, + isci_request->request_daddr); +} + + +/* #define ISCI_REQUEST_VALIDATE_ACCESS + */ + +#ifdef ISCI_REQUEST_VALIDATE_ACCESS + +static inline +struct sas_task *isci_request_access_task(struct isci_request *isci_request) +{ + BUG_ON(isci_request->ttype != io_task); + return isci_request->ttype_ptr.io_task_ptr; +} + +static inline +struct isci_tmf *isci_request_access_tmf(struct isci_request *isci_request) +{ + BUG_ON(isci_request->ttype != tmf_task); + return isci_request->ttype_ptr.tmf_task_ptr; +} + +#else /* not ISCI_REQUEST_VALIDATE_ACCESS */ + +#define isci_request_access_task(RequestPtr) \ + ((RequestPtr)->ttype_ptr.io_task_ptr) + +#define isci_request_access_tmf(RequestPtr) \ + ((RequestPtr)->ttype_ptr.tmf_task_ptr) + +#endif /* not ISCI_REQUEST_VALIDATE_ACCESS */ + + +int isci_request_alloc_tmf( + struct isci_host *isci_host, + struct isci_tmf *isci_tmf, + struct isci_request **isci_request, + struct isci_remote_device *isci_device, + gfp_t gfp_flags); + + +int isci_request_execute( + struct isci_host *isci_host, + struct sas_task *task, + struct isci_request **request, + gfp_t gfp_flags); + +/** + * isci_request_unmap_sgl() - This function unmaps the DMA address of a given + * sgl + * @request: This parameter points to the isci_request object + * @*pdev: This Parameter is the pci_device struct for the controller + * + */ +static inline void isci_request_unmap_sgl( + struct isci_request *request, + struct pci_dev *pdev) +{ + struct sas_task *task = isci_request_access_task(request); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p, task = %p,\n" + "task->data_dir = %d, is_sata = %d\n ", + __func__, + request, + task, + task->data_dir, + sas_protocol_ata(task->task_proto)); + + if ((task->data_dir != PCI_DMA_NONE) && + !sas_protocol_ata(task->task_proto)) { + if (task->num_scatter == 0) + /* 0 indicates a single dma address */ + dma_unmap_single( + &pdev->dev, + request->zero_scatter_daddr, + task->total_xfer_len, + task->data_dir + ); + + else /* unmap the sgl dma addresses */ + dma_unmap_sg( + &pdev->dev, + task->scatter, + request->num_sg_entries, + task->data_dir + ); + } +} + + +void isci_request_io_request_complete( + struct isci_host *isci_host, + struct isci_request *request, + enum sci_io_status completion_status); + +u32 isci_request_io_request_get_transfer_length( + struct isci_request *request); + +SCI_IO_REQUEST_DATA_DIRECTION isci_request_io_request_get_data_direction( + struct isci_request *request); + +/** + * isci_request_io_request_get_next_sge() - This function is called by the sci + * core to retrieve the next sge for a given request. + * @request: This parameter is the isci_request object. + * @current_sge_address: This parameter is the last sge retrieved by the sci + * core for this request. + * + * pointer to the next sge for specified request. + */ +static inline void *isci_request_io_request_get_next_sge( + struct isci_request *request, + void *current_sge_address) +{ + struct sas_task *task = isci_request_access_task(request); + void *ret = NULL; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p, " + "current_sge_address = %p, " + "num_scatter = %d\n", + __func__, + request, + current_sge_address, + task->num_scatter); + + if (!current_sge_address) /* First time through.. */ + ret = task->scatter; /* always task->scatter */ + else if (task->num_scatter == 0) /* Next element, if num_scatter == 0 */ + ret = NULL; /* there is only one element. */ + else + ret = sg_next(current_sge_address); /* sg_next returns NULL + * for the last element + */ + + dev_dbg(&request->isci_host->pdev->dev, + "%s: next sge address = %p\n", + __func__, + ret); + + return ret; +} + +dma_addr_t isci_request_sge_get_address_field( + struct isci_request *request, + void *sge_address); + +u32 isci_request_sge_get_length_field( + struct isci_request *request, + void *sge_address); + +void *isci_request_ssp_io_request_get_cdb_address( + struct isci_request *request); + +u32 isci_request_ssp_io_request_get_cdb_length( + struct isci_request *request); + +u32 isci_request_ssp_io_request_get_lun( + struct isci_request *request); + +u32 isci_request_ssp_io_request_get_task_attribute( + struct isci_request *request); + +u32 isci_request_ssp_io_request_get_command_priority( + struct isci_request *request); + + + + + +void isci_terminate_pending_requests( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + enum isci_request_status new_request_state); + + + + +#endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c new file mode 100644 index 0000000..19b0eea --- /dev/null +++ b/drivers/scsi/isci/sata.c @@ -0,0 +1,356 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "scic_remote_device.h" +#include "scic_sds_remote_device.h" +#include "scic_io_request.h" +#include "scic_task_request.h" +#include "task.h" +#include "request.h" +#include "sata.h" +#include "intel_sat.h" +#include "intel_ata.h" + +static u8 isci_sata_get_management_task_protocol(struct isci_tmf *tmf); + + +/** + * isci_sata_task_to_fis_copy() - This function gets the host_to_dev_fis from + * the core and copies the fis from the task into it. + * @task: This parameter is a pointer to the task struct from libsas. + * + * pointer to the host_to_dev_fis from the core request object. + */ +struct host_to_dev_fis *isci_sata_task_to_fis_copy(struct sas_task *task) +{ + struct isci_request *request = task->lldd_task; + struct host_to_dev_fis *register_fis = + scic_stp_io_request_get_h2d_reg_address( + request->sci_request_handle + ); + + memcpy( + (u8 *)register_fis, + (u8 *)&task->ata_task.fis, + sizeof(struct host_to_dev_fis) + ); + + if (!task->ata_task.device_control_reg_update) + register_fis->flags |= 0x80; + + register_fis->flags &= 0xF0; + + return register_fis; +} + +/** + * isci_sata_is_task_ncq() - This function determines if the given stp task is + * a ncq request. + * @task: This parameter is a pointer to the task struct from libsas. + * + * true if the task is ncq + */ +bool isci_sata_is_task_ncq(struct sas_task *task) +{ + struct ata_queued_cmd *qc = task->uldd_task; + + bool ret = (qc && + (qc->tf.command == ATA_CMD_FPDMA_WRITE || + qc->tf.command == ATA_CMD_FPDMA_READ)); + + return ret; +} + +/** + * isci_sata_set_ncq_tag() - This function sets the ncq tag field in the + * host_to_dev_fis equal to the tag in the queue command in the task. + * @task: This parameter is a pointer to the task struct from libsas. + * @register_fis: This parameter is a pointer to the host_to_dev_fis from the + * core request object. + * + */ +void isci_sata_set_ncq_tag( + struct host_to_dev_fis *register_fis, + struct sas_task *task) +{ + struct ata_queued_cmd *qc = task->uldd_task; + struct isci_request *request = task->lldd_task; + + register_fis->sector_count = qc->tag << 3; + scic_stp_io_request_set_ncq_tag(request->sci_request_handle, qc->tag); +} + +/** + * isci_request_process_stp_response() - This function sets the status and + * response, in the task struct, from the request object for the upper layer + * driver. + * @sas_task: This parameter is the task struct from the upper layer driver. + * @response_buffer: This parameter points to the response of the completed + * request. + * + * none. + */ +void isci_request_process_stp_response( + struct sas_task *task, + void *response_buffer) +{ + struct sata_fis_reg_d2h *d2h_reg_fis = (struct sata_fis_reg_d2h *)response_buffer; + struct task_status_struct *ts = &task->task_status; + struct ata_task_resp *resp = (void *)&ts->buf[0]; + + resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6)); + memcpy(&resp->ending_fis[0], response_buffer + 16, 24); + ts->buf_valid_size = sizeof(*resp); + + /** + * If the device fault bit is set in the status register, then + * set the sense data and return. + */ + if (d2h_reg_fis->status & ATA_STATUS_REG_DEVICE_FAULT_BIT) + ts->stat = SAS_PROTO_RESPONSE; + else + ts->stat = SAM_STAT_GOOD; + + ts->resp = SAS_TASK_COMPLETE; +} + +/** + * isci_sata_get_sat_protocol() - retrieve the sat protocol for the request + * @isci_request: ata request + * + * Note: temporary implementation until expert mode removes the callback + * + */ +u8 isci_sata_get_sat_protocol(struct isci_request *isci_request) +{ + struct sas_task *task; + struct domain_device *dev; + + dev_dbg(&isci_request->isci_host->pdev->dev, + "%s: isci_request = %p, ttype = %d\n", + __func__, isci_request, isci_request->ttype); + + if (tmf_task == isci_request->ttype) { + struct isci_tmf *tmf = isci_request_access_tmf(isci_request); + + return isci_sata_get_management_task_protocol(tmf); + } + + task = isci_request_access_task(isci_request); + dev = task->dev; + + if (!sas_protocol_ata(task->task_proto)) { + WARN(1, "unhandled task protocol\n"); + return SAT_PROTOCOL_NON_DATA; + } + + if (task->data_dir == DMA_NONE) + return SAT_PROTOCOL_NON_DATA; + + /* the "_IN" protocol types are equivalent to their "_OUT" + * analogs as far as the core is concerned + */ + if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) { + if (task->ata_task.dma_xfer) + return SAT_PROTOCOL_PACKET_DMA_DATA_IN; + else + return SAT_PROTOCOL_PACKET_PIO_DATA_IN; + } + + if (task->ata_task.use_ncq) + return SAT_PROTOCOL_FPDMA; + + if (task->ata_task.dma_xfer) + return SAT_PROTOCOL_UDMA_DATA_IN; + else + return SAT_PROTOCOL_PIO_DATA_IN; +} + +static u8 isci_sata_get_management_task_protocol( + struct isci_tmf *tmf) +{ + u8 ret = 0; + + pr_warn("tmf = %p, func = %d\n", tmf, tmf->tmf_code); + + if ((tmf->tmf_code == isci_tmf_sata_srst_high) || + (tmf->tmf_code == isci_tmf_sata_srst_low)) { + pr_warn("%s: tmf->tmf_code == TMF_LU_RESET\n", __func__); + ret = SAT_PROTOCOL_SOFT_RESET; + } + + return ret; +} + +enum sci_status isci_sata_management_task_request_build( + struct isci_request *isci_request) +{ + struct isci_tmf *isci_tmf; + enum sci_status status; + + if (tmf_task != isci_request->ttype) + return SCI_FAILURE; + + isci_tmf = isci_request_access_tmf(isci_request); + + switch (isci_tmf->tmf_code) { + + case isci_tmf_sata_srst_high: + case isci_tmf_sata_srst_low: + { + struct host_to_dev_fis *register_fis = + scic_stp_io_request_get_h2d_reg_address( + isci_request->sci_request_handle + ); + + memset(register_fis, 0, sizeof(*register_fis)); + + register_fis->fis_type = 0x27; + register_fis->flags &= ~0x80; + register_fis->flags &= 0xF0; + if (isci_tmf->tmf_code == isci_tmf_sata_srst_high) + register_fis->control |= ATA_SRST; + else + register_fis->control &= ~ATA_SRST; + break; + } + /* other management commnd go here... */ + default: + return SCI_FAILURE; + } + + /* core builds the protocol specific request + * based on the h2d fis. + */ + status = scic_task_request_construct_sata( + isci_request->sci_request_handle + ); + + return status; +} + +/** + * isci_task_send_lu_reset_sata() - This function is called by of the SAS + * Domain Template functions. This is one of the Task Management functoins + * called by libsas, to reset the given SAS lun. Note the assumption that + * while this call is executing, no I/O will be sent by the host to the + * device. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +int isci_task_send_lu_reset_sata( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + u8 *lun) +{ + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + + /* Send the initial SRST to the target */ + #define ISCI_SRST_TIMEOUT_MS 20 /* 20 ms timeout. */ + isci_task_build_tmf(&tmf, isci_device, isci_tmf_sata_srst_high, + NULL, NULL + ); + + ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_SRST_TIMEOUT_MS); + + if (ret != TMF_RESP_FUNC_COMPLETE) { + dev_warn(&isci_host->pdev->dev, + "%s: Assert SRST failed (%p) = %x", + __func__, + isci_device, + ret); + + /* Return the failure so that the LUN reset is escalated + * to a target reset. + */ + goto out; + } + + /* Leave SRST high for a bit. */ + #define ISCI_SRST_ASSERT_DELAY 100 /* usecs */ + scic_cb_stall_execution(ISCI_SRST_ASSERT_DELAY); + + /* Deassert SRST. */ + isci_task_build_tmf(&tmf, isci_device, isci_tmf_sata_srst_low, + NULL, NULL + ); + ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_SRST_TIMEOUT_MS); + + if (ret == TMF_RESP_FUNC_COMPLETE) + dev_dbg(&isci_host->pdev->dev, + "%s: SATA LUN reset passed (%p)\n", + __func__, + isci_device); + else + dev_warn(&isci_host->pdev->dev, + "%s: Deassert SRST failed (%p)=%x\n", + __func__, + isci_device, + ret); + + out: + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Resume the device. */ + scic_sds_remote_device_resume(isci_device->sci_device_handle); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + return ret; +} diff --git a/drivers/scsi/isci/sata.h b/drivers/scsi/isci/sata.h new file mode 100644 index 0000000..b6ba25b --- /dev/null +++ b/drivers/scsi/isci/sata.h @@ -0,0 +1,83 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "intel_sat.h" + + + +struct host_to_dev_fis *isci_sata_task_to_fis_copy( + struct sas_task *task); + +bool isci_sata_is_task_ncq( + struct sas_task *task); + +void isci_sata_set_ncq_tag( + struct host_to_dev_fis *register_fis, + struct sas_task *task); + +void isci_request_process_stp_response( + struct sas_task *task, + void *response_buffer); + +u8 isci_sata_get_sat_protocol( + struct isci_request *isci_request); + +enum sci_status isci_sata_management_task_request_build( + struct isci_request *isci_request); + +int isci_task_send_lu_reset_sata( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + u8 *lun); diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h new file mode 100644 index 0000000..e1020ee --- /dev/null +++ b/drivers/scsi/isci/sci_environment.h @@ -0,0 +1,112 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_ENVIRONMENT_H_ +#define _SCI_ENVIRONMENT_H_ + +#include "isci.h" + +struct scic_sds_controller; +struct scic_sds_phy; +struct scic_sds_port; +struct scic_sds_remote_device; + +static inline struct device *scic_to_dev(struct scic_sds_controller *scic) +{ + struct isci_host *isci_host = sci_object_get_association(scic); + + return &isci_host->pdev->dev; +} + +static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) +{ + struct isci_phy *iphy = sci_object_get_association(sci_phy); + + if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) + return NULL; + + return &iphy->isci_port->isci_host->pdev->dev; +} + +static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) +{ + struct isci_port *iport = sci_object_get_association(sci_port); + + if (!iport || !iport->isci_host) + return NULL; + + return &iport->isci_host->pdev->dev; +} + +static inline struct device *scirdev_to_dev(struct scic_sds_remote_device *sci_dev) +{ + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + if (!idev || !idev->isci_port || !idev->isci_port->isci_host) + return NULL; + + return &idev->isci_port->isci_host->pdev->dev; +} + +enum { + ISCI_SI_REVA0, + ISCI_SI_REVA2, + ISCI_SI_REVB0, +}; + +extern int isci_si_rev; + + +#endif diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c new file mode 100644 index 0000000..5e6f558 --- /dev/null +++ b/drivers/scsi/isci/task.c @@ -0,0 +1,1691 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include "scic_task_request.h" +#include "scic_remote_device.h" +#include "scic_io_request.h" +#include "scic_sds_remote_device.h" +#include "scic_sds_remote_node_context.h" +#include "isci.h" +#include "request.h" +#include "sata.h" +#include "task.h" + + +/** + * isci_task_execute_task() - This function is one of the SAS Domain Template + * functions. This function is called by libsas to send a task down to + * hardware. + * @task: This parameter specifies the SAS task to send. + * @num: This parameter specifies the number of tasks to queue. + * @gfp_flags: This parameter specifies the context of this call. + * + * status, zero indicates success. + */ +int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) +{ + struct isci_host *isci_host; + struct isci_request *request = NULL; + struct isci_remote_device *device; + unsigned long flags; + unsigned long quiesce_flags = 0; + int ret; + enum sci_status status; + + + dev_dbg(task->dev->port->ha->dev, "%s: num=%d\n", __func__, num); + + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + + isci_task_complete_for_upper_layer( + task, + SAS_TASK_UNDELIVERED, + SAM_STAT_TASK_ABORTED, + isci_perform_normal_io_completion + ); + + return 0; /* The I/O was accepted (and failed). */ + } + if ((task->dev == NULL) || (task->dev->port == NULL)) { + + /* Indicate SAS_TASK_UNDELIVERED, so that the scsi midlayer + * removes the target. + */ + isci_task_complete_for_upper_layer( + task, + SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN, + isci_perform_normal_io_completion + ); + return 0; /* The I/O was accepted (and failed). */ + } + isci_host = isci_host_from_sas_ha(task->dev->port->ha); + + /* Check if we have room for more tasks */ + ret = isci_host_can_queue(isci_host, num); + + if (ret) { + dev_warn(task->dev->port->ha->dev, "%s: queue full\n", __func__); + return ret; + } + + do { + dev_dbg(task->dev->port->ha->dev, + "task = %p, num = %d; dev = %p; cmd = %p\n", + task, num, task->dev, task->uldd_task); + + if ((task->dev == NULL) || (task->dev->port == NULL)) { + dev_warn(task->dev->port->ha->dev, + "%s: task %p's port or dev == NULL!\n", + __func__, task); + + /* Indicate SAS_TASK_UNDELIVERED, so that the scsi + * midlayer removes the target. + */ + isci_task_complete_for_upper_layer( + task, + SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN, + isci_perform_normal_io_completion + ); + /* We don't have a valid host reference, so we + * can't control the host queueing condition. + */ + continue; + } + + device = isci_dev_from_domain_dev(task->dev); + + isci_host = isci_host_from_sas_ha(task->dev->port->ha); + + /* check if the controller hasn't started or if the device + * is ready but not accepting IO. + */ + if (device) { + + spin_lock_irqsave(&device->host_quiesce_lock, + quiesce_flags); + } + /* From this point onward, any process that needs to guarantee + * that there is no kernel I/O being started will have to wait + * for the quiesce spinlock. + */ + + if (isci_host_get_state(isci_host) == isci_starting || + (device && ((isci_remote_device_get_state(device) == isci_ready) || + (isci_remote_device_get_state(device) == isci_host_quiesce)))) { + + /* Forces a retry from scsi mid layer. */ + dev_warn(task->dev->port->ha->dev, + "%s: task %p: isci_host->status = %d, " + "device = %p\n", + __func__, + task, + isci_host_get_state(isci_host), + device); + + if (device) + dev_dbg(task->dev->port->ha->dev, + "%s: device->status = 0x%x\n", + __func__, + isci_remote_device_get_state(device)); + + /* Indicate QUEUE_FULL so that the scsi midlayer + * retries. + */ + isci_task_complete_for_upper_layer( + task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL, + isci_perform_normal_io_completion + ); + isci_host_can_dequeue(isci_host, 1); + } + /* the device is going down... */ + else if (!device || (isci_ready_for_io != isci_remote_device_get_state(device))) { + + dev_dbg(task->dev->port->ha->dev, + "%s: task %p: isci_host->status = %d, " + "device = %p\n", + __func__, + task, + isci_host_get_state(isci_host), + device); + + if (device) + dev_dbg(task->dev->port->ha->dev, + "%s: device->status = 0x%x\n", + __func__, + isci_remote_device_get_state(device)); + + /* Indicate SAS_TASK_UNDELIVERED, so that the scsi + * midlayer removes the target. + */ + isci_task_complete_for_upper_layer( + task, + SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN, + isci_perform_normal_io_completion + ); + isci_host_can_dequeue(isci_host, 1); + + } else { + /* build and send the request. */ + status = isci_request_execute(isci_host, task, &request, + gfp_flags); + + if (status == SCI_SUCCESS) { + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_AT_INITIATOR; + spin_unlock_irqrestore(&task->task_state_lock, flags); + } else { + /* Indicate QUEUE_FULL so that the scsi + * midlayer retries. if the request + * failed for remote device reasons, + * it gets returned as + * SAS_TASK_UNDELIVERED next time + * through. + */ + isci_task_complete_for_upper_layer( + task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL, + isci_perform_normal_io_completion + ); + isci_host_can_dequeue(isci_host, 1); + } + } + if (device) { + spin_unlock_irqrestore(&device->host_quiesce_lock, + quiesce_flags + ); + } + task = list_entry(task->list.next, struct sas_task, list); + } while (--num > 0); + return 0; +} + + + +/** + * isci_task_request_build() - This function builds the task request object. + * @isci_host: This parameter specifies the ISCI host object + * @request: This parameter points to the isci_request object allocated in the + * request construct function. + * @tmf: This parameter is the task management struct to be built + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_task_request_build( + struct isci_host *isci_host, + struct isci_request **isci_request, + struct isci_tmf *isci_tmf) +{ + struct scic_sds_remote_device *sci_device; + enum sci_status status = SCI_FAILURE; + struct isci_request *request; + struct isci_remote_device *isci_device; +/* struct sci_sas_identify_address_frame_protocols dev_protocols; */ + struct smp_discover_response_protocols dev_protocols; + + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_tmf = %p\n", __func__, isci_tmf); + + isci_device = isci_tmf->device; + sci_device = isci_device->sci_device_handle; + + /* do common allocation and init of request object. */ + status = isci_request_alloc_tmf( + isci_host, + isci_tmf, + &request, + isci_device, + GFP_ATOMIC + ); + + if (status != SCI_SUCCESS) + goto out; + + /* let the core do it's construct. */ + status = scic_task_request_construct( + isci_host->core_controller, + sci_device, + SCI_CONTROLLER_INVALID_IO_TAG, + request, + request->sci_request_mem_ptr, + &request->sci_request_handle + ); + + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: scic_task_request_construct failed - " + "status = 0x%x\n", + __func__, + status); + goto errout; + } + + sci_object_set_association( + request->sci_request_handle, + request + ); + + scic_remote_device_get_protocols( + sci_device, + &dev_protocols + ); + + /* let the core do it's protocol + * specific construction. + */ + if (dev_protocols.u.bits.attached_ssp_target) { + + isci_tmf->proto = SAS_PROTOCOL_SSP; + status = scic_task_request_construct_ssp( + request->sci_request_handle + ); + if (status != SCI_SUCCESS) + goto errout; + } + + if (dev_protocols.u.bits.attached_stp_target) { + + isci_tmf->proto = SAS_PROTOCOL_SATA; + status = isci_sata_management_task_request_build(request); + + if (status != SCI_SUCCESS) + goto errout; + } + + goto out; + + errout: + + /* release the dma memory if we fail. */ + isci_request_free(isci_host, request); + request = NULL; + + out: + *isci_request = request; + return status; +} + +/** + * isci_tmf_timeout_cb() - This function is called as a kernel callback when + * the timeout period for the TMF has expired. + * + * + */ +static void isci_tmf_timeout_cb(void *tmf_request_arg) +{ + struct isci_request *request = (struct isci_request *)tmf_request_arg; + struct isci_tmf *tmf = isci_request_access_tmf(request); + enum sci_status status; + + BUG_ON(request->ttype != tmf_task); + + /* This task management request has timed-out. Terminate the request + * so that the request eventually completes to the requestor in the + * request completion callback path. + */ + /* Note - the timer callback function itself has provided spinlock + * exclusion from the start and completion paths. No need to take + * the request->isci_host->scic_lock here. + */ + + if (tmf->timeout_timer != NULL) { + /* Call the users callback, if any. */ + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_timed_out, tmf, + tmf->cb_data); + + /* Terminate the TMF transmit request. */ + status = scic_controller_terminate_request( + request->isci_host->core_controller, + request->isci_device->sci_device_handle, + request->sci_request_handle + ); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: tmf_request = %p; tmf = %p; status = %d\n", + __func__, request, tmf, status); + } else + dev_dbg(&request->isci_host->pdev->dev, + "%s: timer already canceled! " + "tmf_request = %p; tmf = %p\n", + __func__, request, tmf); + + /* No need to unlock since the caller to this callback is doing it for + * us. + * request->isci_host->scic_lock + */ +} + +/** + * isci_task_execute_tmf() - This function builds and sends a task request, + * then waits for the completion. + * @isci_host: This parameter specifies the ISCI host object + * @tmf: This parameter is the pointer to the task management structure for + * this request. + * @timeout_ms: This parameter specifies the timeout period for the task + * management request. + * + * TMF_RESP_FUNC_COMPLETE on successful completion of the TMF (this includes + * error conditions reported in the IU status), or TMF_RESP_FUNC_FAILED. + */ +int isci_task_execute_tmf( + struct isci_host *isci_host, + struct isci_tmf *tmf, + unsigned long timeout_ms) +{ + DECLARE_COMPLETION_ONSTACK(completion); + enum sci_status status = SCI_FAILURE; + struct scic_sds_remote_device *sci_device; + struct isci_remote_device *isci_device = tmf->device; + struct isci_request *request; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + + /* sanity check, return TMF_RESP_FUNC_FAILED + * if the device is not there and ready. + */ + if (!isci_device || + ((isci_ready_for_io != isci_remote_device_get_state(isci_device)) && + (isci_host_quiesce != isci_remote_device_get_state(isci_device)))) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p not ready (%d)\n", + __func__, + isci_device, + isci_remote_device_get_state(isci_device)); + return TMF_RESP_FUNC_FAILED; + } else + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", + __func__, isci_device); + + sci_device = isci_device->sci_device_handle; + + /* Assign the pointer to the TMF's completion kernel wait structure. */ + tmf->complete = &completion; + + isci_task_request_build( + isci_host, + &request, + tmf + ); + + if (!request) { + dev_warn(&isci_host->pdev->dev, + "%s: isci_task_request_build failed\n", + __func__); + return TMF_RESP_FUNC_FAILED; + } + + /* Allocate the TMF timeout timer. */ + tmf->timeout_timer = isci_timer_create( + &isci_host->timer_list_struct, + isci_host, + request, + isci_tmf_timeout_cb + ); + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Start the timer. */ + if (tmf->timeout_timer) + isci_timer_start(tmf->timeout_timer, timeout_ms); + else + dev_warn(&isci_host->pdev->dev, + "%s: isci_timer_create failed!!!!\n", + __func__); + + /* start the TMF io. */ + status = scic_controller_start_task( + isci_host->core_controller, + sci_device, + request->sci_request_handle, + SCI_CONTROLLER_INVALID_IO_TAG + ); + + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: start_io failed - status = 0x%x, request = %p\n", + __func__, + status, + request); + goto cleanup_request; + } + + /* Call the users callback, if any. */ + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data); + + /* Change the state of the TMF-bearing request to "started". */ + isci_request_change_state(request, started); + + /* add the request to the remote device request list. */ + list_add(&request->dev_node, &isci_device->reqs_in_process); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* Wait for the TMF to complete, or a timeout. */ + wait_for_completion(&completion); + + isci_print_tmf(tmf); + + if (tmf->status == SCI_SUCCESS) + ret = TMF_RESP_FUNC_COMPLETE; + else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) { + dev_dbg(&isci_host->pdev->dev, + "%s: tmf.status == " + "SCI_FAILURE_IO_RESPONSE_VALID\n", + __func__); + ret = TMF_RESP_FUNC_COMPLETE; + } + /* Else - leave the default "failed" status alone. */ + + dev_dbg(&isci_host->pdev->dev, + "%s: completed request = %p\n", + __func__, + request); + + if (request->io_request_completion != NULL) { + + /* The fact that this is non-NULL for a TMF request + * means there is a thread waiting for this TMF to + * finish. + */ + complete(request->io_request_completion); + } + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + cleanup_request: + + /* Clean up the timer if needed. */ + if (tmf->timeout_timer) { + isci_timer_stop(tmf->timeout_timer); + isci_timer_free(&isci_host->timer_list_struct, + tmf->timeout_timer); + tmf->timeout_timer = NULL; + } + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + isci_request_free(isci_host, request); + + return ret; +} + +void isci_task_build_tmf( + struct isci_tmf *tmf, + struct isci_remote_device *isci_device, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + void *cb_data) +{ + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + memset(tmf, 0, sizeof(*tmf)); + + tmf->device = isci_device; + tmf->tmf_code = code; + tmf->timeout_timer = NULL; + tmf->cb_state_func = tmf_sent_cb; + tmf->cb_data = cb_data; +} + +static struct isci_request *isci_task_get_request_from_task( + struct sas_task *task, + struct isci_host **isci_host, + struct isci_remote_device **isci_device) +{ + + struct isci_request *request = NULL; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + + request = task->lldd_task; + + /* If task is already done, the request isn't valid */ + if (!(task->task_state_flags & SAS_TASK_STATE_DONE) && + (task->task_state_flags & SAS_TASK_AT_INITIATOR) && + (request != NULL)) { + + if (isci_host != NULL) + *isci_host = request->isci_host; + + if (isci_device != NULL) + *isci_device = request->isci_device; + } + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + return request; +} + +/** + * isci_task_validate_request_to_abort() - This function checks the given I/O + * against the "started" state. If the request is still "started", it's + * state is changed to aborted. NOTE: isci_host->scic_lock MUST BE HELD + * BEFORE CALLING THIS FUNCTION. + * @isci_request: This parameter specifies the request object to control. + * @isci_host: This parameter specifies the ISCI host object + * @isci_device: This is the device to which the request is pending. + * @aborted_io_completion: This is a completion structure that will be added to + * the request in case it is changed to aborting; this completion is + * triggered when the request is fully completed. + * + * Either "started" on successful change of the task status to "aborted", or + * "unallocated" if the task cannot be controlled. + */ +static enum isci_request_status isci_task_validate_request_to_abort( + struct isci_request *isci_request, + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct completion *aborted_io_completion) +{ + enum isci_request_status old_state = unallocated; + + /* Only abort the task if it's in the + * device's request_in_process list + */ + if (isci_request && !list_empty(&isci_request->dev_node)) { + old_state = isci_request_change_started_to_aborted( + isci_request, aborted_io_completion); + + /* Only abort requests in the started state. */ + if (old_state != started) + old_state = unallocated; + } + + return old_state; +} + +static void isci_request_cleanup_completed_loiterer( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct isci_request *isci_request) +{ + struct sas_task *task = isci_request_access_task(isci_request); + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device=%p, request=%p, task=%p\n", + __func__, isci_device, isci_request, + isci_request->ttype_ptr.io_task_ptr); + + spin_lock_irqsave(&isci_host->scic_lock, flags); + list_del_init(&isci_request->dev_node); + if (task != NULL) + task->lldd_task = NULL; + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + isci_request_free(isci_host, isci_request); +} +/** + * isci_terminate_request_core() - This function will terminate the given + * request, and wait for it to complete. This function must only be called + * from a thread that can wait. Note that the request is terminated and + * completed (back to the host, if started there). + * @isci_host: This SCU. + * @isci_device: The target. + * @isci_request: The I/O request to be terminated. + * + * + */ +static void isci_terminate_request_core( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct isci_request *isci_request, + struct completion *request_completion) +{ + enum sci_status status = SCI_SUCCESS; + bool was_terminated = false; + bool needs_cleanup_handling = false; + enum isci_request_status request_status; + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: device = %p; request = %p\n", + __func__, isci_device, isci_request); + + /* Peek at the current status of the request. This will tell + * us if there was special handling on the request such that it + * needs to be detached and freed here. + */ + spin_lock_irqsave(&isci_request->state_lock, flags); + request_status = isci_request_get_state(isci_request); + + /* TMFs are in their own thread */ + if ((isci_request->ttype == io_task) && + ((request_status == aborted) || + (request_status == aborting) || + (request_status == terminating))) + /* The completion routine won't free a request in + * the aborted/aborting/terminating state, so we do + * it here. + */ + needs_cleanup_handling = true; + + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + spin_lock_irqsave(&isci_host->scic_lock, flags); + /* Make sure the request wasn't just sitting around signalling + * device condition (if the request handle is NULL, then the + * request completed but needed additional handling here). + */ + if (isci_request->sci_request_handle != NULL) { + was_terminated = true; + status = scic_controller_terminate_request( + isci_host->core_controller, + isci_device->sci_device_handle, + isci_request->sci_request_handle + ); + } + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* + * The only time the request to terminate will + * fail is when the io request is completed and + * being aborted. + */ + if (status != SCI_SUCCESS) + dev_err(&isci_host->pdev->dev, + "%s: scic_controller_terminate_request" + " returned = 0x%x\n", + __func__, + status); + else { + if (was_terminated) { + dev_dbg(&isci_host->pdev->dev, + "%s: before completion wait (%p)\n", + __func__, + request_completion); + + /* Wait here for the request to complete. */ + wait_for_completion(request_completion); + + dev_dbg(&isci_host->pdev->dev, + "%s: after completion wait (%p)\n", + __func__, + request_completion); + } + + if (needs_cleanup_handling) + isci_request_cleanup_completed_loiterer( + isci_host, isci_device, isci_request + ); + } +} +static void isci_terminate_request( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct isci_request *isci_request, + enum isci_request_status new_request_state) +{ + enum isci_request_status old_state; + + DECLARE_COMPLETION_ONSTACK(request_completion); + unsigned long flags; + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Change state to "new_request_state" if it is currently "started" */ + old_state = isci_request_change_started_to_newstate( + isci_request, + &request_completion, + new_request_state + ); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + if (old_state == started) + /* This request was not already being aborted. If it had been, + * then the aborting I/O (ie. the TMF request) would not be in + * the aborting state, and thus would be terminated here. Note + * that since the TMF completion's call to the kernel function + * "complete()" does not happen until the pending I/O request + * terminate fully completes, we do not have to implement a + * special wait here for already aborting requests - the + * termination of the TMF request will force the request + * to finish it's already started terminate. + */ + isci_terminate_request_core(isci_host, isci_device, + isci_request, &request_completion); +} + +/** + * isci_terminate_pending_requests() - This function will change the all of the + * requests on the given device's state to "aborting", will terminate the + * requests, and wait for them to complete. This function must only be + * called from a thread that can wait. Note that the requests are all + * terminated and completed (back to the host, if started there). + * @isci_host: This parameter specifies SCU. + * @isci_device: This parameter specifies the target. + * + * + */ +void isci_terminate_pending_requests( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + enum isci_request_status new_request_state) +{ + struct isci_request *isci_request; + struct sas_task *task; + bool done = false; + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p (new request state = %d)\n", + __func__, isci_device, new_request_state); + + #define ISCI_TERMINATE_SHOW_PENDING_REQUESTS + #ifdef ISCI_TERMINATE_SHOW_PENDING_REQUESTS + { + struct isci_request *request; + + /* Only abort the task if it's in the + * device's request_in_process list + */ + list_for_each_entry(request, + &isci_device->reqs_in_process, + dev_node) + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p; request is on " + "reqs_in_process list: %p\n", + __func__, isci_device, request); + } + #endif /* ISCI_TERMINATE_SHOW_PENDING_REQUESTS */ + + /* Clean up all pending requests. */ + do { + spin_lock_irqsave(&isci_host->scic_lock, flags); + + if (list_empty(&isci_device->reqs_in_process)) { + + done = true; + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p; done.\n", + __func__, isci_device); + } else { + /* The list was not empty - grab the first request. */ + isci_request = list_first_entry( + &isci_device->reqs_in_process, + struct isci_request, dev_node + ); + /* Note that we are not expecting to have to control + * the target to abort the request. + */ + isci_request->complete_in_target = true; + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* Get the libsas task reference. */ + task = isci_request_access_task(isci_request); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device=%p request=%p; task=%p\n", + __func__, isci_device, isci_request, task); + + /* Mark all still pending I/O with the selected next + * state. + */ + isci_terminate_request(isci_host, isci_device, + isci_request, new_request_state + ); + + /* Set the 'done' state on the task. */ + if (task) + isci_task_all_done(task); + } + } while (!done); +} + +/** + * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain + * Template functions. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +static int isci_task_send_lu_reset_sas( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + u8 *lun) +{ + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, isci_device = %p\n", + __func__, isci_host, isci_device); + /* Send the LUN reset to the target. By the time the call returns, + * the TMF has fully exected in the target (in which case the return + * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or + * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED"). + */ + isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_lun_reset, NULL, + NULL); + + #define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */ + ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_LU_RESET_TIMEOUT_MS); + + if (ret == TMF_RESP_FUNC_COMPLETE) + dev_dbg(&isci_host->pdev->dev, + "%s: %p: TMF_LU_RESET passed\n", + __func__, isci_device); + else + dev_dbg(&isci_host->pdev->dev, + "%s: %p: TMF_LU_RESET failed (%x)\n", + __func__, isci_device, ret); + + return ret; +} + +/** + * isci_task_lu_reset() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas, + * to reset the given lun. Note the assumption that while this call is + * executing, no I/O will be sent by the host to the device. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +int isci_task_lu_reset( + struct domain_device *domain_device, + u8 *lun) +{ + struct isci_host *isci_host = NULL; + struct isci_remote_device *isci_device = NULL; + int ret; + bool device_stopping = false; + + if (domain_device == NULL) { + pr_warn("%s: domain_device == NULL\n", __func__); + return TMF_RESP_FUNC_FAILED; + } + + isci_device = isci_dev_from_domain_dev(domain_device); + + if (domain_device->port != NULL) + isci_host = isci_host_from_sas_ha(domain_device->port->ha); + + pr_debug("%s: domain_device=%p, isci_host=%p; isci_device=%p\n", + __func__, domain_device, isci_host, isci_device); + + if (isci_device != NULL) + device_stopping = (isci_device->status == isci_stopping) + || (isci_device->status == isci_stopped); + + /* If there is a device reset pending on any request in the + * device's list, fail this LUN reset request in order to + * escalate to the device reset. + */ + if ((isci_device == NULL) || + (isci_host == NULL) || + ((isci_host != NULL) && + (isci_device != NULL) && + (device_stopping || + (isci_device_is_reset_pending(isci_host, isci_device))))) { + dev_warn(&isci_host->pdev->dev, + "%s: No dev (%p), no host (%p), or " + "RESET PENDING: domain_device=%p\n", + __func__, isci_device, isci_host, domain_device); + return TMF_RESP_FUNC_FAILED; + } + + /* Stop I/O to the remote device. */ + isci_device_set_host_quiesce_lock_state(isci_device, true); + + /* Send the task management part of the reset. */ + if (sas_protocol_ata(domain_device->tproto)) { + ret = isci_task_send_lu_reset_sata( + isci_host, isci_device, lun + ); + } else + ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun); + + /* If the LUN reset worked, all the I/O can now be terminated. */ + if (ret == TMF_RESP_FUNC_COMPLETE) + /* Terminate all I/O now. */ + isci_terminate_pending_requests(isci_host, + isci_device, + terminating); + + /* Resume I/O to the remote device. */ + isci_device_set_host_quiesce_lock_state(isci_device, false); + + return ret; +} + + +/* int (*lldd_clear_nexus_port)(struct asd_sas_port *); */ +int isci_task_clear_nexus_port(struct asd_sas_port *port) +{ + return TMF_RESP_FUNC_FAILED; +} + + + +int isci_task_clear_nexus_ha(struct sas_ha_struct *ha) +{ + return TMF_RESP_FUNC_FAILED; +} + +int isci_task_I_T_nexus_reset(struct domain_device *dev) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/* Task Management Functions. Must be called from process context. */ + +/** + * isci_abort_task_process_cb() - This is a helper function for the abort task + * TMF command. It manages the request state with respect to the successful + * transmission / completion of the abort task request. + * @cb_state: This parameter specifies when this function was called - after + * the TMF request has been started and after it has timed-out. + * @tmf: This parameter specifies the TMF in progress. + * + * + */ +static void isci_abort_task_process_cb( + enum isci_tmf_cb_state cb_state, + struct isci_tmf *tmf, + void *cb_data) +{ + struct isci_request *old_request; + + old_request = (struct isci_request *)cb_data; + + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: tmf=%p, old_request=%p\n", + __func__, tmf, old_request); + + switch (cb_state) { + + case isci_tmf_started: + /* The TMF has been started. Nothing to do here, since the + * request state was already set to "aborted" by the abort + * task function. + */ + BUG_ON(old_request->status != aborted); + break; + + case isci_tmf_timed_out: + + /* Set the task's state to "aborting", since the abort task + * function thread set it to "aborted" (above) in anticipation + * of the task management request working correctly. Since the + * timeout has now fired, the TMF request failed. We set the + * state such that the request completion will indicate the + * device is no longer present. + */ + isci_request_change_state(old_request, aborting); + break; + + default: + dev_err(&old_request->isci_host->pdev->dev, + "%s: Bad cb_state (%d): tmf=%p, old_request=%p\n", + __func__, cb_state, tmf, old_request); + break; + } +} + +/** + * isci_task_abort_task() - This function is one of the SAS Domain Template + * functions. This function is called by libsas to abort a specified task. + * @task: This parameter specifies the SAS task to abort. + * + * status, zero indicates success. + */ +int isci_task_abort_task(struct sas_task *task) +{ + DECLARE_COMPLETION_ONSTACK(aborted_io_completion); + struct isci_request *old_request = NULL; + struct isci_remote_device *isci_device = NULL; + struct isci_host *isci_host = NULL; + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + bool any_dev_reset, device_stopping; + + /* Get the isci_request reference from the task. Note that + * this check does not depend on the pending request list + * in the device, because tasks driving resets may land here + * after completion in the core. + */ + old_request = isci_task_get_request_from_task(task, &isci_host, + &isci_device); + + dev_dbg(&isci_host->pdev->dev, + "%s: task = %p\n", __func__, task); + + /* Check if the device has been / is currently being removed. + * If so, no task management will be done, and the I/O will + * be terminated. + */ + device_stopping = (isci_device->status == isci_stopping) + || (isci_device->status == isci_stopped); + +#ifdef NOMORE + /* This abort task function is the first stop of the libsas error + * handler thread. Since libsas is executing in a thread with a + * referernce to the "task" parameter, that task cannot be completed + * directly back to the upper layers. In order to make sure that + * the task is managed correctly if this abort task fails, set the + * "SAS_TASK_STATE_ABORTED" bit now such that completions up the + * stack will be intercepted and only allowed to happen in the + * libsas SCSI error handler thread. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); +#endif /* NOMORE */ + + /* This version of the driver will fail abort requests for + * SATA/STP. Failing the abort request this way will cause the + * SCSI error handler thread to escalate to LUN reset + */ + if (sas_protocol_ata(task->task_proto) && !device_stopping) { + dev_warn(&isci_host->pdev->dev, + " task %p is for a STP/SATA device;" + " returning TMF_RESP_FUNC_FAILED\n" + " to cause a LUN reset...\n", task); + return TMF_RESP_FUNC_FAILED; + } + + dev_dbg(&isci_host->pdev->dev, + "%s: old_request == %p\n", __func__, old_request); + + spin_lock_irqsave(&task->task_state_lock, flags); + + /* Don't do resets to stopping devices. */ + if (device_stopping) + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + + /* See if there is a pending device reset for this device. */ + any_dev_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET; + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + if ((isci_device != NULL) && !device_stopping) + any_dev_reset = any_dev_reset + || isci_device_is_reset_pending(isci_host, + isci_device + ); + + /* If the extraction of the request reference from the task + * failed, then the request has been completed (or if there is a + * pending reset then this abort request function must be failed + * in order to escalate to the target reset). + */ + if ((old_request == NULL) || + ((old_request != NULL) && + (old_request->sci_request_handle == NULL) && + (old_request->complete_in_target)) || + any_dev_reset) { + + spin_lock_irqsave(&task->task_state_lock, flags); + + /* If the device reset task flag is set, fail the task + * management request. Otherwise, the original request + * has completed. + */ + if (any_dev_reset) { + + /* Turn off the task's DONE to make sure this + * task is escalated to a target reset. + */ + task->task_state_flags &= ~SAS_TASK_STATE_DONE; + + /* Fail the task management request in order to + * escalate to the target reset. + */ + ret = TMF_RESP_FUNC_FAILED; + + dev_dbg(&isci_host->pdev->dev, + "%s: Failing task abort in order to " + "escalate to target reset because\n" + "SAS_TASK_NEED_DEV_RESET is set for " + "task %p on dev %p\n", + __func__, task, isci_device); + + } else { + ret = TMF_RESP_FUNC_COMPLETE; + + dev_dbg(&isci_host->pdev->dev, + "%s: abort task not needed for %p\n", + __func__, task); + + /* The request has already completed and there + * is nothing to do here other than to set the task + * done bit, and indicate that the task abort function + * was sucessful. + */ + isci_set_task_doneflags(task); + + /* Set the abort bit to make sure that libsas sticks the + * task in the completed task queue. + */ +/* task->task_state_flags |= SAS_TASK_STATE_ABORTED; */ + + /* Check for the situation where the request was + * left around on the device list but the + * request already completed. + */ + if (old_request && !old_request->sci_request_handle) { + + isci_request_cleanup_completed_loiterer( + isci_host, isci_device, old_request + ); + } + } + spin_unlock_irqrestore(&task->task_state_lock, flags); + + return ret; + } + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Sanity check the request status, and set the I/O kernel completion + * struct that will be triggered when the request completes. + */ + if (isci_task_validate_request_to_abort( + old_request, + isci_host, + isci_device, + &aborted_io_completion) + == unallocated) { + dev_dbg(&isci_host->pdev->dev, + "%s: old_request not valid for device = %p\n", + __func__, + isci_device); + old_request = NULL; + } + + if (!old_request) { + + /* There is no isci_request attached to the sas_task. + * It must have been completed and detached. + */ + dev_dbg(&isci_host->pdev->dev, + "%s: old_request == NULL\n", + __func__); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* Set the state on the task. */ + isci_task_all_done(task); + + return TMF_RESP_FUNC_COMPLETE; + } + if (task->task_proto == SAS_PROTOCOL_SMP || device_stopping) { + + if (device_stopping) + dev_dbg(&isci_host->pdev->dev, + "%s: device is stopping, thus no TMF\n", + __func__); + else + dev_dbg(&isci_host->pdev->dev, + "%s: request is SMP, thus no TMF\n", + __func__); + + old_request->complete_in_target = true; + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* Set the state on the task. */ + isci_task_all_done(task); + + ret = TMF_RESP_FUNC_COMPLETE; + + /* Stopping and SMP devices are not sent a TMF, and are not + * reset, but the outstanding I/O request is terminated here. + * + * Clean up the request on our side, and wait for the aborted + * I/O to complete. + */ + isci_terminate_request_core(isci_host, isci_device, old_request, + &aborted_io_completion); + } else { + /* Fill in the tmf stucture */ + isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_task_abort, + isci_abort_task_process_cb, old_request); + + tmf.io_tag = scic_io_request_get_io_tag( + old_request->sci_request_handle + ); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */ + ret = isci_task_execute_tmf(isci_host, &tmf, + ISCI_ABORT_TASK_TIMEOUT_MS); + + if (ret == TMF_RESP_FUNC_COMPLETE) { + old_request->complete_in_target = true; + + /* Clean up the request on our side, and wait for the aborted I/O to + * complete. + */ + isci_terminate_request_core(isci_host, isci_device, old_request, + &aborted_io_completion); + + /* Set the state on the task. */ + isci_task_all_done(task); + } else + dev_err(&isci_host->pdev->dev, + "%s: isci_task_send_tmf failed\n", + __func__); + } + + return ret; +} + +/** + * isci_task_abort_task_set() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas, + * to abort all task for the given lun. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_abort_task_set( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/** + * isci_task_clear_aca() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_clear_aca( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + + +/** + * isci_task_clear_task_set() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_clear_task_set( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/** + * isci_task_query_task() - This function is implemented to cause libsas to + * correctly escalate the failed abort to a LUN or target reset (this is + * because sas_scsi_find_task libsas function does not correctly interpret + * all return codes from the abort task call). When TMF_RESP_FUNC_SUCC is + * returned, libsas turns this into a LUN reset; when FUNC_FAILED is + * returned, libsas will turn this into a target reset + * @task: This parameter specifies the sas task being queried. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_query_task( + struct sas_task *task) +{ + /* See if there is a pending device reset for this device. */ + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + return TMF_RESP_FUNC_FAILED; + else + return TMF_RESP_FUNC_SUCC; +} + +/** + * isci_task_request_complete() - This function is called by the sci core when + * an task request completes. + * @isci_host: This parameter specifies the ISCI host object + * @request: This parameter is the completed isci_request object. + * @completion_status: This parameter specifies the completion status from the + * sci core. + * + * none. + */ +void isci_task_request_complete( + struct isci_host *isci_host, + struct isci_request *request, + enum sci_task_status completion_status) +{ + struct isci_remote_device *isci_device = request->isci_device; + enum isci_request_status old_state; + struct isci_tmf *tmf = isci_request_access_tmf(request); + struct completion *tmf_complete; + + dev_dbg(&isci_host->pdev->dev, + "%s: request = %p, status=%d\n", + __func__, request, completion_status); + + old_state = isci_request_change_state(request, completed); + + tmf->status = completion_status; + request->complete_in_target = true; + + if (SAS_PROTOCOL_SSP == tmf->proto) { + + memcpy(&tmf->resp.resp_iu, + scic_io_request_get_response_iu_address( + request->sci_request_handle + ), + sizeof(struct sci_ssp_response_iu)); + + } else if (SAS_PROTOCOL_SATA == tmf->proto) { + + memcpy(&tmf->resp.d2h_fis, + scic_stp_io_request_get_d2h_reg_address( + request->sci_request_handle + ), + sizeof(struct sata_fis_reg_d2h) + ); + } + + /* Manage the timer if it is still running. */ + if (tmf->timeout_timer) { + + isci_timer_stop(tmf->timeout_timer); + isci_timer_free(&isci_host->timer_list_struct, + tmf->timeout_timer); + tmf->timeout_timer = NULL; + } + + /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ + tmf_complete = tmf->complete; + + scic_controller_complete_task( + isci_host->core_controller, + isci_device->sci_device_handle, + request->sci_request_handle + ); + /* NULL the request handle to make sure it cannot be terminated + * or completed again. + */ + request->sci_request_handle = NULL; + + isci_request_change_state(request, unallocated); + list_del_init(&request->dev_node); + + /* The task management part completes last. */ + complete(tmf_complete); +} + + +/** + * isci_task_ssp_request_get_lun() - This function is called by the sci core to + * retrieve the lun for a given task request. + * @request: This parameter is the isci_request object. + * + * lun for specified task request. + */ +u32 isci_task_ssp_request_get_lun(struct isci_request *request) +{ + struct isci_tmf *isci_tmf = isci_request_access_tmf(request); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: lun = %d\n", __func__, isci_tmf->lun[0]); +/* @todo: build lun from array of bytes to 32 bit */ + return isci_tmf->lun[0]; +} + +/** + * isci_task_ssp_request_get_function() - This function is called by the sci + * core to retrieve the function for a given task request. + * @request: This parameter is the isci_request object. + * + * function code for specified task request. + */ +u8 isci_task_ssp_request_get_function(struct isci_request *request) +{ + struct isci_tmf *isci_tmf = isci_request_access_tmf(request); + + dev_dbg(&request->isci_host->pdev->dev, + "%s: func = %d\n", __func__, isci_tmf->tmf_code); + + return isci_tmf->tmf_code; +} + +/** + * isci_task_ssp_request_get_io_tag_to_manage() - This function is called by + * the sci core to retrieve the io tag for a given task request. + * @request: This parameter is the isci_request object. + * + * io tag for specified task request. + */ +u16 isci_task_ssp_request_get_io_tag_to_manage(struct isci_request *request) +{ + u16 io_tag = SCI_CONTROLLER_INVALID_IO_TAG; + + if (tmf_task == request->ttype) { + struct isci_tmf *tmf = isci_request_access_tmf(request); + io_tag = tmf->io_tag; + } + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p, io_tag = %d\n", + __func__, request, io_tag); + + return io_tag; +} + +/** + * isci_task_ssp_request_get_response_data_address() - This function is called + * by the sci core to retrieve the response data address for a given task + * request. + * @request: This parameter is the isci_request object. + * + * response data address for specified task request. + */ +void *isci_task_ssp_request_get_response_data_address( + struct isci_request *request) +{ + struct isci_tmf *isci_tmf = isci_request_access_tmf(request); + + return &isci_tmf->resp.resp_iu; +} + +/** + * isci_task_ssp_request_get_response_data_length() - This function is called + * by the sci core to retrieve the response data length for a given task + * request. + * @request: This parameter is the isci_request object. + * + * response data length for specified task request. + */ +u32 isci_task_ssp_request_get_response_data_length( + struct isci_request *request) +{ + struct isci_tmf *isci_tmf = isci_request_access_tmf(request); + + return sizeof(isci_tmf->resp.resp_iu); +} + +/** + * isci_bus_reset_handler() - This function performs a target reset of the + * device referenced by "cmd'. This function is exported through the + * "struct scsi_host_template" structure such that it is called when an I/O + * recovery process has escalated to a target reset. Note that this function + * is called from the scsi error handler event thread, so may block on calls. + * @scsi_cmd: This parameter specifies the target to be reset. + * + * SUCCESS if the reset process was successful, else FAILED. + */ +int isci_bus_reset_handler(struct scsi_cmnd *cmd) +{ + unsigned long flags = 0; + struct isci_host *isci_host = NULL; + enum sci_status status; + int base_status; + struct isci_remote_device *isci_dev + = isci_dev_from_domain_dev( + sdev_to_domain_dev(cmd->device)); + + dev_dbg(&cmd->device->sdev_gendev, + "%s: cmd %p, isci_dev %p\n", + __func__, cmd, isci_dev); + + if (!isci_dev) { + dev_warn(&cmd->device->sdev_gendev, + "%s: isci_dev is GONE!\n", + __func__); + + return TMF_RESP_FUNC_COMPLETE; /* Nothing to reset. */ + } + + if (isci_dev->isci_port != NULL) + isci_host = isci_dev->isci_port->isci_host; + + if (isci_host != NULL) + spin_lock_irqsave(&isci_host->scic_lock, flags); + + status = scic_remote_device_reset(isci_dev->sci_device_handle); + if (status != SCI_SUCCESS) { + + if (isci_host != NULL) + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + scmd_printk(KERN_WARNING, cmd, + "%s: scic_remote_device_reset(%p) returned %d!\n", + __func__, isci_dev, status); + + return TMF_RESP_FUNC_FAILED; + } + if (isci_host != NULL) + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* Stop I/O to the remote device. */ + isci_device_set_host_quiesce_lock_state(isci_dev, true); + + /* Make sure all pending requests are able to be fully terminated. */ + isci_device_clear_reset_pending(isci_dev); + + /* Terminate in-progress I/O now. */ + isci_remote_device_nuke_requests(isci_dev); + + /* Call into the libsas default handler (which calls sas_phy_reset). */ + base_status = sas_eh_bus_reset_handler(cmd); + + if (base_status != SUCCESS) { + + /* There can be cases where the resets to individual devices + * behind an expander will fail because of an unplug of the + * expander itself. + */ + scmd_printk(KERN_WARNING, cmd, + "%s: sas_eh_bus_reset_handler(%p) returned %d!\n", + __func__, cmd, base_status); + } + + /* WHAT TO DO HERE IF sas_phy_reset FAILS? */ + + if (isci_host != NULL) + spin_lock_irqsave(&isci_host->scic_lock, flags); + status + = scic_remote_device_reset_complete(isci_dev->sci_device_handle); + + if (isci_host != NULL) + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + if (status != SCI_SUCCESS) { + scmd_printk(KERN_WARNING, cmd, + "%s: scic_remote_device_reset_complete(%p) " + "returned %d!\n", + __func__, isci_dev, status); + } + /* WHAT TO DO HERE IF scic_remote_device_reset_complete FAILS? */ + + dev_dbg(&cmd->device->sdev_gendev, + "%s: cmd %p, isci_dev %p complete.\n", + __func__, cmd, isci_dev); + + /* Resume I/O to the remote device. */ + isci_device_set_host_quiesce_lock_state(isci_dev, false); + + return TMF_RESP_FUNC_COMPLETE; +} diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h new file mode 100644 index 0000000..ced6a8b --- /dev/null +++ b/drivers/scsi/isci/task.h @@ -0,0 +1,368 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if !defined(_ISCI_TASK_H_) +#define _ISCI_TASK_H_ + +struct isci_request; +struct isci_host; + +/** + * enum isci_tmf_cb_state - This enum defines the possible states in which the + * TMF callback function is invoked during the TMF execution process. + * + * + */ +enum isci_tmf_cb_state { + + isci_tmf_init_state = 0, + isci_tmf_started, + isci_tmf_timed_out +}; + +/** + * enum isci_tmf_function_codes - This enum defines the possible preparations + * of task management requests. + * + * + */ +enum isci_tmf_function_codes { + + isci_tmf_func_none = 0, + isci_tmf_ssp_task_abort = TMF_ABORT_TASK, + isci_tmf_ssp_lun_reset = TMF_LU_RESET, + isci_tmf_sata_srst_high = TMF_LU_RESET + 0x100, /* Non SCSI */ + isci_tmf_sata_srst_low = TMF_LU_RESET + 0x101 /* Non SCSI */ +}; +/** + * struct isci_tmf - This class represents the task management object which + * acts as an interface to libsas for processing task management requests + * + * + */ +struct isci_tmf { + + struct completion *complete; + enum sas_protocol proto; + union { + struct sci_ssp_response_iu resp_iu; + struct dev_to_host_fis d2h_fis; + } resp; + unsigned char lun[8]; + u16 io_tag; + struct isci_remote_device *device; + enum isci_tmf_function_codes tmf_code; + int status; + + struct isci_timer *timeout_timer; + + /* The optional callback function allows the user process to + * track the TMF transmit / timeout conditions. + */ + void (*cb_state_func)( + enum isci_tmf_cb_state, + struct isci_tmf *, void *); + void *cb_data; + +}; + +static inline void isci_print_tmf( + struct isci_tmf *tmf) +{ + if (SAS_PROTOCOL_SATA == tmf->proto) + dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + "%s: status = %x\n" + "tmf->resp.d2h_fis.status = %x\n" + "tmf->resp.d2h_fis.error = %x\n", + __func__, + tmf->status, + tmf->resp.d2h_fis.status, + tmf->resp.d2h_fis.error); + else + dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + "%s: status = %x\n" + "tmf->resp.resp_iu.data_present = %x\n" + "tmf->resp.resp_iu.status = %x\n" + "tmf->resp.resp_iu.data_length = %x\n" + "tmf->resp.resp_iu.data[0] = %x\n" + "tmf->resp.resp_iu.data[1] = %x\n" + "tmf->resp.resp_iu.data[2] = %x\n" + "tmf->resp.resp_iu.data[3] = %x\n", + __func__, + tmf->status, + tmf->resp.resp_iu.data_present, + tmf->resp.resp_iu.status, + (tmf->resp.resp_iu.response_data_length[0] << 24) + + (tmf->resp.resp_iu.response_data_length[1] << 16) + + (tmf->resp.resp_iu.response_data_length[2] << 8) + + tmf->resp.resp_iu.response_data_length[3], + tmf->resp.resp_iu.data[0], + tmf->resp.resp_iu.data[1], + tmf->resp.resp_iu.data[2], + tmf->resp.resp_iu.data[3]); +} + + +int isci_task_execute_task( + struct sas_task *task, + int num, + gfp_t gfp_flags); + +int isci_task_abort_task( + struct sas_task *task); + +int isci_task_abort_task_set( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_aca( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_task_set( + struct domain_device *d_device, + u8 *lun); + +int isci_task_query_task( + struct sas_task *task); + +int isci_task_lu_reset( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_nexus_port( + struct asd_sas_port *port); + +int isci_task_clear_nexus_ha( + struct sas_ha_struct *ha); + +int isci_task_I_T_nexus_reset( + struct domain_device *d_device); + +void isci_task_request_complete( + struct isci_host *isci_host, + struct isci_request *request, + enum sci_task_status completion_status); + +u16 isci_task_ssp_request_get_io_tag_to_manage( + struct isci_request *request); + +u8 isci_task_ssp_request_get_function( + struct isci_request *request); + +u32 isci_task_ssp_request_get_lun( + struct isci_request *request); + +void *isci_task_ssp_request_get_response_data_address( + struct isci_request *request); + +u32 isci_task_ssp_request_get_response_data_length( + struct isci_request *request); + +int isci_queuecommand( + struct scsi_cmnd *scsi_cmd, + void (*donefunc)(struct scsi_cmnd *)); + +int isci_bus_reset_handler(struct scsi_cmnd *cmd); + +void isci_task_build_tmf( + struct isci_tmf *tmf, + struct isci_remote_device *isci_device, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)( + enum isci_tmf_cb_state, + struct isci_tmf *, void *), + void *cb_data); + +int isci_task_execute_tmf( + struct isci_host *isci_host, + struct isci_tmf *tmf, + unsigned long timeout_ms); + +/** + * enum isci_completion_selection - This enum defines the possible actions to + * take with respect to a given request's notification back to libsas. + * + * + */ +enum isci_completion_selection { + + isci_perform_normal_io_completion, /* Normal notify (task_done) */ + isci_perform_aborted_io_completion, /* No notification. */ + isci_perform_error_io_completion /* Use sas_task_abort */ +}; + +static inline void isci_set_task_doneflags( + struct sas_task *task) +{ + /* Since no futher action will be taken on this task, + * make sure to mark it complete from the lldd perspective. + */ + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + task->task_state_flags &= ~SAS_TASK_STATE_PENDING; +} +/** + * isci_task_all_done() - This function clears the task bits to indicate the + * LLDD is done with the task. + * + * + */ +static inline void isci_task_all_done( + struct sas_task *task) +{ + unsigned long flags; + + /* Since no futher action will be taken on this task, + * make sure to mark it complete from the lldd perspective. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + isci_set_task_doneflags(task); + spin_unlock_irqrestore(&task->task_state_lock, flags); +} + +/** + * isci_task_set_completion_status() - This function sets the completion status + * for the request. + * @task: This parameter is the completed request. + * @response: This parameter is the response code for the completed task. + * @status: This parameter is the status code for the completed task. + * + * none. + */ +static inline void isci_task_set_completion_status( + struct sas_task *task, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + + task->task_status.resp = response; + task->task_status.stat = status; + + /* Don't set DONE (or clear AT_INITIATOR) for any task going into the + * error path, because the EH interprets that as a handled error condition. + * Also don't take action if there is a reset pending. + */ + if ((task_notification_selection != isci_perform_error_io_completion) + && !(task->task_state_flags & SAS_TASK_NEED_DEV_RESET)) + isci_set_task_doneflags(task); + + spin_unlock_irqrestore(&task->task_state_lock, flags); +} +/** + * isci_task_complete_for_upper_layer() - This function completes the request + * to the upper layer driver. + * @host: This parameter is a pointer to the host on which the the request + * should be queued (either as an error or success). + * @request: This parameter is the completed request. + * @response: This parameter is the response code for the completed task. + * @status: This parameter is the status code for the completed task. + * + * none. + */ +static inline void isci_task_complete_for_upper_layer( + struct sas_task *task, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + isci_task_set_completion_status(task, response, status, + task_notification_selection); + + + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (task_notification_selection) { + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + dev_dbg(task->dev->port->ha->dev, + "%s: Normal - task = %p, response=%d, status=%d\n", + __func__, task, response, status); + task->task_done(task); + task->lldd_task = NULL; + break; + + case isci_perform_aborted_io_completion: + /* No notification because this request is already in the + * abort path. + */ + dev_warn(task->dev->port->ha->dev, + "%s: Aborted - task = %p, response=%d, status=%d\n", + __func__, task, response, status); + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_warn(task->dev->port->ha->dev, + "%s: Error - task = %p, response=%d, status=%d\n", + __func__, task, response, status); + sas_task_abort(task); + break; + + default: + dev_warn(task->dev->port->ha->dev, + "%s: isci task notification default case!", + __func__); + sas_task_abort(task); + break; + } +} + +#endif /* !defined(_SCI_TASK_H_) */ diff --git a/drivers/scsi/isci/timers.c b/drivers/scsi/isci/timers.c new file mode 100644 index 0000000..ca72308 --- /dev/null +++ b/drivers/scsi/isci/timers.c @@ -0,0 +1,319 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "timers.h" + + +/** + * isci_timer_list_construct() - This method contrucst the SCI Timer List + * object used by the SCI Module class. The construction process involves + * creating isci_timer objects and adding them to the SCI Timer List + * object's list member. The number of isci_timer objects is determined by + * the timer_list_size parameter. + * @isci_timer_list: This parameter points to the SCI Timer List object being + * constructed. The calling routine is responsible for allocating the memory + * for isci_timer_list and initializing the timer list_head member of + * isci_timer_list. + * @timer_list_size: This parameter specifies the number of isci_timer objects + * contained by the SCI Timer List. which this timer is to be associated. + * + * This method returns an error code indicating sucess or failure. The user + * should check for possible memory allocation error return otherwise, a zero + * indicates success. + */ +int isci_timer_list_construct( + struct isci_timer_list *isci_timer_list, + int timer_list_size) +{ + struct isci_timer *isci_timer; + int i; + int err = 0; + + + for (i = 0; i < timer_list_size; i++) { + + isci_timer = kzalloc(sizeof(*isci_timer), GFP_KERNEL); + + if (!isci_timer) { + + err = -ENOMEM; + break; + } + isci_timer->used = 0; + isci_timer->stopped = 1; + isci_timer->parent = isci_timer_list; + list_add(&isci_timer->node, &isci_timer_list->timers); + } + + return 0; + +} + + +/** + * isci_timer_list_destroy() - This method destroys the SCI Timer List object + * used by the SCI Module class. The destruction process involves freeing + * memory allocated for isci_timer objects on the SCI Timer List object's + * timers list_head member. If any isci_timer objects are mark as "in use", + * they are not freed and the function returns an error code of -EBUSY. + * @isci_timer_list: This parameter points to the SCI Timer List object being + * destroyed. + * + * This method returns an error code indicating sucess or failure. The user + * should check for possible -EBUSY error return, in the event of one or more + * isci_timers still "in use", otherwise, a zero indicates success. + */ +int isci_timer_list_destroy( + struct isci_timer_list *isci_timer_list) +{ + struct isci_timer *timer, *tmp; + + list_for_each_entry_safe(timer, tmp, &isci_timer_list->timers, node) { + isci_timer_free(isci_timer_list, timer); + list_del(&timer->node); + kfree(timer); + } + return 0; +} + + + +static void isci_timer_restart(struct isci_timer *isci_timer) +{ + struct timer_list *timer = + &isci_timer->timer; + unsigned long timeout; + + dev_dbg(&isci_timer->isci_host->pdev->dev, + "%s: isci_timer = %p\n", __func__, isci_timer); + + isci_timer->restart = 0; + isci_timer->stopped = 0; + timeout = isci_timer->timeout_value; + timeout = (timeout * HZ) / 1000; + timeout = timeout ? timeout : 1; + mod_timer(timer, jiffies + timeout); +} + +/** + * This method pulls an isci_timer object off of the list for the SCI Timer + * List object specified, marks the isci_timer as "in use" and initializes + * it with user callback function and cookie data. The timer is not start at + * this time, just reserved for the user. + * @isci_timer_list: This parameter points to the SCI Timer List from which the + * timer is reserved. + * @cookie: This parameter specifies a piece of information that the user must + * retain. This cookie is to be supplied by the user anytime a timeout + * occurs for the created timer. + * @timer_callback: This parameter specifies the callback method to be invoked + * whenever the timer expires. + * + * This method returns a pointer to an isci_timer object reserved from the SCI + * Timer List. The pointer will be utilized for all further interactions + * relating to this timer. + */ + +static void timer_function(unsigned long data) +{ + + struct isci_timer *timer = (struct isci_timer *)data; + struct isci_host *isci_host = timer->isci_host; + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_timer = %p\n", __func__, timer); + + if (isci_stopped == isci_host_get_state(isci_host)) { + timer->stopped = 1; + return; + } + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + if (!timer->stopped) { + timer->stopped = 1; + timer->timer_callback(timer->cookie); + + if (timer->restart) + isci_timer_restart(timer); + } + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); +} + + +struct isci_timer *isci_timer_create( + struct isci_timer_list *isci_timer_list, + struct isci_host *isci_host, + void *cookie, + void (*timer_callback)(void *)) +{ + + struct timer_list *timer; + struct isci_timer *isci_timer; + struct list_head *timer_list = + &isci_timer_list->timers; + unsigned long flags; + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + if (list_empty(timer_list)) { + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + return NULL; + } + + isci_timer = list_entry(timer_list->next, struct isci_timer, node); + + if (isci_timer->used) { + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + return NULL; + } + isci_timer->used = 1; + isci_timer->stopped = 1; + list_move_tail(&isci_timer->node, timer_list); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + timer = &isci_timer->timer; + timer->data = (unsigned long)isci_timer; + timer->function = timer_function; + isci_timer->cookie = cookie; + isci_timer->timer_callback = timer_callback; + isci_timer->isci_host = isci_host; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_timer = %p\n", __func__, isci_timer); + + return isci_timer; +} + +/** + * isci_timer_free() - This method frees the isci_timer, marking it "free to + * use", then places its back at the head of the timers list for the SCI + * Timer List object specified. + * @isci_timer_list: This parameter points to the SCI Timer List from which the + * timer is reserved. + * @isci_timer: This parameter specifies the timer to be freed. + * + */ +void isci_timer_free( + struct isci_timer_list *isci_timer_list, + struct isci_timer *isci_timer) +{ + struct list_head *timer_list = &isci_timer_list->timers; + + dev_dbg(&isci_timer->isci_host->pdev->dev, + "%s: isci_timer = %p\n", __func__, isci_timer); + + if (list_empty(timer_list)) + return; + + isci_timer->used = 0; + list_move(&isci_timer->node, timer_list); + + if (!isci_timer->stopped) { + del_timer(&isci_timer->timer); + isci_timer->stopped = 1; + } +} + +/** + * isci_timer_start() - This method starts the specified isci_timer, with the + * specified timeout value. + * @isci_timer: This parameter specifies the timer to be started. + * @timeout: This parameter specifies the timeout, in milliseconds, after which + * the associated callback function will be called. + * + */ +void isci_timer_start( + struct isci_timer *isci_timer, + unsigned long timeout) +{ + struct timer_list *timer = &isci_timer->timer; + + dev_dbg(&isci_timer->isci_host->pdev->dev, + "%s: isci_timer = %p\n", __func__, isci_timer); + + isci_timer->timeout_value = timeout; + init_timer(timer); + timeout = (timeout * HZ) / 1000; + timeout = timeout ? timeout : 1; + + timer->expires = jiffies + timeout; + timer->data = (unsigned long)isci_timer; + timer->function = timer_function; + isci_timer->stopped = 0; + isci_timer->restart = 0; + add_timer(timer); +} + +/** + * isci_timer_stop() - This method stops the supplied isci_timer. + * @isci_timer: This parameter specifies the isci_timer to be stopped. + * + */ +void isci_timer_stop(struct isci_timer *isci_timer) +{ + dev_dbg(&isci_timer->isci_host->pdev->dev, + "%s: isci_timer = %p\n", __func__, isci_timer); + + if (isci_timer->stopped) + return; + + isci_timer->stopped = 1; + + del_timer(&isci_timer->timer); +} diff --git a/drivers/scsi/isci/timers.h b/drivers/scsi/isci/timers.h new file mode 100644 index 0000000..ca5c215 --- /dev/null +++ b/drivers/scsi/isci/timers.h @@ -0,0 +1,126 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if !defined(_SCI_TIMER_H_) +#define _SCI_TIMER_H_ + +#include +#include + +/*************************************************** + * isci_timer + *************************************************** + */ +/** + * struct isci_timer_list - This class is the container for all isci_timer + * objects + * + * + */ +struct isci_timer_list { + + struct list_head timers; +}; + +/** + * struct isci_timer - This class represents the timer object used by SCIC. It + * wraps the Linux timer_list object. + * + * + */ +struct isci_timer { + int used; + int stopped; + int restart; + int timeout_value; + void *cookie; + void (*timer_callback)(void *); + struct list_head node; + struct timer_list timer; + struct isci_timer_list *parent; + struct isci_host *isci_host; +}; + +#define to_isci_timer(t) \ + container_of(t, struct isci_timer, timer); + +int isci_timer_list_construct( + struct isci_timer_list *isci_timer_list, + int timer_list_size); + + +int isci_timer_list_destroy( + struct isci_timer_list *isci_timer_list); + +struct isci_timer *isci_timer_create( + struct isci_timer_list *isci_timer_list, + struct isci_host *isci_host, + void *cookie, + void (*timer_callback)(void *)); + +void isci_timer_free( + struct isci_timer_list *isci_timer_list, + struct isci_timer *isci_timer); + +void isci_timer_start( + struct isci_timer *isci_timer, + unsigned long timeout); + +void isci_timer_stop( + struct isci_timer *isci_timer); + + +#endif /* !defined (_SCI_TIMER_H_) */ + diff --git a/firmware/Makefile b/firmware/Makefile index 0d15a3d..5f43bfb 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -82,6 +82,7 @@ fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \ fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ advansys/3550.bin advansys/38C0800.bin +fw-shipped-$(CONFIG_SCSI_ISCI) += isci/isci_firmware.bin fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \ qlogic/12160.bin fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex new file mode 100644 index 0000000..9fc9e60 --- /dev/null +++ b/firmware/isci/isci_firmware.bin.ihex @@ -0,0 +1,11 @@ +:1000000023534355204D4147494323000100010834 +:1000100001000000020000000400000008000000D1 +:1000200001000000020000000400000008000000C1 +:1000300002080300000003000000030000000300AA +:1000400000000300000003000000030000000300A4 +:1000500000000308000000F0FFFFCF5F000000F188 +:10006000FFFFCF5F000000F2FFFFCF5F000000F353 +:10007000FFFFCF5F000000F4FFFFCF5F000000F53F +:10008000FFFFCF5F000000F6FFFFCF5F000000F72B +:05009000FFFFCF5FFF40 +:00000001FF -- cgit v0.10.2 From 74ea9c163a5c09638b453208cd129b686b85e91e Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Tue, 8 Feb 2011 08:09:10 -0700 Subject: isci: remove unused SC_LIBRARY_HANDLE_T typedef Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_types.h b/drivers/scsi/isci/core/sci_types.h index 431735d..72a56bf 100644 --- a/drivers/scsi/isci/core/sci_types.h +++ b/drivers/scsi/isci/core/sci_types.h @@ -63,15 +63,6 @@ #define SCI_INVALID_HANDLE 0x0 -/** - * The SCI_LIBRARY_HANDLE_T will be utilized by SCI users as an opaque handle - * for the SCI Library object. - * - * SCI_LIBRARY_HANDLE_T - */ -typedef void *SCI_LIBRARY_HANDLE_T; - - typedef enum { SCI_IO_REQUEST_DATA_IN = 0, /* Read operation */ SCI_IO_REQUEST_DATA_OUT, /* Write operation */ diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 3530076..4f4b99d 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -143,7 +143,6 @@ struct isci_host { struct isci_pci_info { struct msix_entry msix_entries[SCI_MAX_MSIX_INT]; int core_lib_array_index; - SCI_LIBRARY_HANDLE_T core_lib_handle; struct isci_host *hosts; }; -- cgit v0.10.2 From a7e536c7d6f1796e8727f5c90d33765ae7cfd8d8 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Tue, 8 Feb 2011 09:28:42 -0700 Subject: isci: remove SCI_INVALID_HANDLE Replace SCI_INVALID_HANDLE with NULL Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c index 86ae6a8..2d785b5 100644 --- a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c +++ b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c @@ -76,7 +76,7 @@ void sci_mdl_first_entry( /* * If this MDL is managing another MDL, then recursively rewind that MDL * object as well. */ - if (base_mdl->next_mdl != SCI_INVALID_HANDLE) + if (base_mdl->next_mdl != NULL) sci_mdl_first_entry(base_mdl->next_mdl); } @@ -93,7 +93,7 @@ void sci_mdl_next_entry( /* * This MDL has exhausted it's set of entries. If this MDL is managing * another MDL, then start iterating through that MDL. */ - if (base_mdl->next_mdl != SCI_INVALID_HANDLE) + if (base_mdl->next_mdl != NULL) sci_mdl_next_entry(base_mdl->next_mdl); } } @@ -108,7 +108,7 @@ struct sci_physical_memory_descriptor *sci_mdl_get_current_entry( /* * This MDL has exhausted it's set of entries. If this MDL is managing * another MDL, then return it's current entry. */ - if (base_mdl->next_mdl != SCI_INVALID_HANDLE) + if (base_mdl->next_mdl != NULL) return sci_mdl_get_current_entry(base_mdl->next_mdl); } diff --git a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h index 257d6e3..614e0a9 100644 --- a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h +++ b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h @@ -94,8 +94,7 @@ struct sci_base_memory_descriptor_list { /** * This field simply allows a user to chain memory descriptor lists - * together if desired. This field will be initialized to - * SCI_INVALID_HANDLE. + * together if desired. This field will be initialized to NULL. */ struct sci_base_memory_descriptor_list *next_mdl; diff --git a/drivers/scsi/isci/core/sci_types.h b/drivers/scsi/isci/core/sci_types.h index 72a56bf..e15dc0c 100644 --- a/drivers/scsi/isci/core/sci_types.h +++ b/drivers/scsi/isci/core/sci_types.h @@ -61,8 +61,6 @@ #define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \ ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) -#define SCI_INVALID_HANDLE 0x0 - typedef enum { SCI_IO_REQUEST_DATA_IN = 0, /* Read operation */ SCI_IO_REQUEST_DATA_OUT, /* Write operation */ diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 25a6140..fec273b 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -82,7 +82,7 @@ struct scic_sds_port; struct scic_phy_properties { /** * This field specifies the port that currently contains the - * supplied phy. This field may be set to SCI_INVALID_HANDLE + * supplied phy. This field may be set to NULL * if the phy is not currently contained in a port. */ struct scic_sds_port *owning_port; diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 35f7796..6a32d91 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -890,7 +890,7 @@ enum sci_status scic_sds_controller_start_next_phy( for (index = 0; index < SCI_MAX_PHYS; index++) { the_phy = &this_controller->phy_table[index]; - if (scic_sds_phy_get_port(the_phy) != SCI_INVALID_HANDLE) { + if (scic_sds_phy_get_port(the_phy) != NULL) { /** * The controller start operation is complete if and only * if: @@ -940,7 +940,7 @@ enum sci_status scic_sds_controller_start_next_phy( scic_sds_controller_get_port_configuration_mode(this_controller) == SCIC_PORT_MANUAL_CONFIGURATION_MODE ) { - if (scic_sds_phy_get_port(the_phy) == SCI_INVALID_HANDLE) { + if (scic_sds_phy_get_port(the_phy) == NULL) { this_controller->next_phy_to_start++; /* @@ -1025,7 +1025,7 @@ enum sci_status scic_sds_controller_stop_devices( status = SCI_SUCCESS; for (index = 0; index < this_controller->remote_node_entries; index++) { - if (this_controller->device_table[index] != SCI_INVALID_HANDLE) { + if (this_controller->device_table[index] != NULL) { /* / @todo What timeout value do we want to provide to this request? */ device_status = scic_remote_device_stop(this_controller->device_table[index], 0); @@ -1197,7 +1197,7 @@ static void scic_sds_controller_task_completion( /* Make sure that we really want to process this IO request */ if ( - (io_request != SCI_INVALID_HANDLE) + (io_request != NULL) && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) && ( scic_sds_io_tag_get_sequence(io_request->io_tag) @@ -1395,7 +1395,7 @@ static void scic_sds_controller_event_completion( case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: io_request = this_controller->io_request_table[index]; - if (io_request != SCI_INVALID_HANDLE) + if (io_request != NULL) scic_sds_io_request_event_handler(io_request, completion_entry); else dev_warn(scic_to_dev(this_controller), @@ -1410,7 +1410,7 @@ static void scic_sds_controller_event_completion( case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: device = this_controller->device_table[index]; - if (device != SCI_INVALID_HANDLE) + if (device != NULL) scic_sds_remote_device_event_handler(device, completion_entry); else dev_warn(scic_to_dev(this_controller), @@ -2174,7 +2174,7 @@ struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( task_index = scic_sds_io_tag_get_index(io_tag); if (task_index < this_controller->task_context_entries) { - if (this_controller->io_request_table[task_index] != SCI_INVALID_HANDLE) { + if (this_controller->io_request_table[task_index] != NULL) { task_sequence = scic_sds_io_tag_get_sequence(io_tag); if (task_sequence == this_controller->io_request_sequence[task_index]) { @@ -2183,7 +2183,7 @@ struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( } } - return SCI_INVALID_HANDLE; + return NULL; } /** @@ -2240,7 +2240,7 @@ void scic_sds_controller_free_remote_node_context( u32 remote_node_count = scic_sds_remote_device_node_count(the_device); if (this_controller->device_table[node_id] == the_device) { - this_controller->device_table[node_id] = SCI_INVALID_HANDLE; + this_controller->device_table[node_id] = NULL; scic_sds_remote_node_table_release_remote_node_index( &this_controller->available_remote_nodes, remote_node_count, node_id @@ -2262,7 +2262,7 @@ union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffe ) { if ( (node_id < this_controller->remote_node_entries) - && (this_controller->device_table[node_id] != SCI_INVALID_HANDLE) + && (this_controller->device_table[node_id] != NULL) ) { return &this_controller->remote_node_context_table[node_id]; } @@ -2449,7 +2449,7 @@ u32 scic_controller_get_suggested_start_timeout( struct scic_sds_controller *sc) { /* Validate the user supplied parameters. */ - if (sc == SCI_INVALID_HANDLE) + if (sc == NULL) return 0; /* @@ -3659,7 +3659,7 @@ static enum sci_status scic_sds_controller_ready_state_complete_io_handler( if (status == SCI_SUCCESS) { index = scic_sds_io_tag_get_index(the_request->io_tag); - this_controller->io_request_table[index] = SCI_INVALID_HANDLE; + this_controller->io_request_table[index] = NULL; } return status; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 7d012b5..01da46a 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -414,15 +414,15 @@ void scic_sds_phy_construct( * containing port. * * This method returns a handle to a port that contains the supplied phy. - * SCI_INVALID_HANDLE This value is returned if the phy is not part of a real - * port (i.e. it's contained in the dummy port). !SCI_INVALID_HANDLE All other + * NULL This value is returned if the phy is not part of a real + * port (i.e. it's contained in the dummy port). !NULL All other * values indicate a handle/pointer to the port containing the phy. */ struct scic_sds_port *scic_sds_phy_get_port( struct scic_sds_phy *this_phy) { if (scic_sds_port_get_index(this_phy->owning_port) == SCIC_SDS_DUMMY_PORT) - return SCI_INVALID_HANDLE; + return NULL; return this_phy->owning_port; } @@ -2373,7 +2373,7 @@ static enum sci_status scic_sds_phy_ready_state_event_handler( case SCU_EVENT_BROADCAST_CHANGE: /* Broadcast change received. Notify the port. */ - if (scic_sds_phy_get_port(this_phy) != SCI_INVALID_HANDLE) + if (scic_sds_phy_get_port(this_phy) != NULL) scic_sds_port_broadcast_change_received(this_phy->owning_port, this_phy); else this_phy->bcn_received_while_port_unassigned = true; diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 1af3850..9749e3a 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -277,8 +277,8 @@ enum sci_status scic_sds_port_set_phy( * that means that the phy is not part of a port and that the port does * not already have a phy assinged to the phy index. */ if ( - (port->phy_table[phy->phy_index] == SCI_INVALID_HANDLE) - && (scic_sds_phy_get_port(phy) == SCI_INVALID_HANDLE) + (port->phy_table[phy->phy_index] == NULL) + && (scic_sds_phy_get_port(phy) == NULL) && scic_sds_port_is_valid_phy_assignment(port, phy->phy_index) ) { /* @@ -318,7 +318,7 @@ enum sci_status scic_sds_port_clear_phy( &scic_sds_port_get_controller(port)->port_table[SCI_MAX_PORTS] ); - port->phy_table[phy->phy_index] = SCI_INVALID_HANDLE; + port->phy_table[phy->phy_index] = NULL; return SCI_SUCCESS; } @@ -529,7 +529,7 @@ void scic_sds_port_construct( this_port->started_request_count = 0; this_port->assigned_device_count = 0; - this_port->timer_handle = SCI_INVALID_HANDLE; + this_port->timer_handle = NULL; this_port->transport_layer_registers = NULL; this_port->port_task_scheduler_registers = NULL; @@ -669,7 +669,7 @@ enum sci_status scic_port_get_properties( struct scic_sds_port *port, struct scic_port_properties *prop) { - if ((port == SCI_INVALID_HANDLE) || + if ((port == NULL) || (port->logical_port_index == SCIC_SDS_DUMMY_PORT)) return SCI_FAILURE_INVALID_PORT; @@ -1267,29 +1267,29 @@ static enum sci_status scic_sds_port_ready_operational_substate_reset_handler( enum sci_status status = SCI_FAILURE_INVALID_PHY; u32 phy_index; struct scic_sds_port *this_port = (struct scic_sds_port *)port; - struct scic_sds_phy *selected_phy = SCI_INVALID_HANDLE; + struct scic_sds_phy *selected_phy = NULL; /* Select a phy on which we can send the hard reset request. */ for ( phy_index = 0; (phy_index < SCI_MAX_PHYS) - && (selected_phy == SCI_INVALID_HANDLE); + && (selected_phy == NULL); phy_index++ ) { selected_phy = this_port->phy_table[phy_index]; if ( - (selected_phy != SCI_INVALID_HANDLE) + (selected_phy != NULL) && !scic_sds_port_active_phy(this_port, selected_phy) ) { /* We found a phy but it is not ready select different phy */ - selected_phy = SCI_INVALID_HANDLE; + selected_phy = NULL; } } /* If we have a phy then go ahead and start the reset procedure */ - if (selected_phy != SCI_INVALID_HANDLE) { + if (selected_phy != NULL) { status = scic_sds_phy_reset(selected_phy); if (status == SCI_SUCCESS) { diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 37d4469..dd2cdd4 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -118,9 +118,9 @@ static s32 sci_sas_address_compare( * * This routine will find a matching port for the phy. This means that the * port and phy both have the same broadcast sas address and same received sas - * address. The port address or the SCI_INVALID_HANDLE if there is no matching + * address. The port address or the NULL if there is no matching * port. port address if the port can be found to match the phy. - * SCI_INVALID_HANDLE if there is no matching port for the phy. + * NULL if there is no matching port for the phy. */ static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( struct scic_sds_controller *controller, @@ -156,7 +156,7 @@ static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( } } - return SCI_INVALID_HANDLE; + return NULL; } /** @@ -390,7 +390,7 @@ static void scic_sds_mpc_agent_timeout_handler( * @controller: This is the controller object that receives the link up * notification. * @port: This is the port object associated with the phy. If the is no - * associated port this is an SCI_INVALID_HANDLE. + * associated port this is an NULL. * @phy: This is the phy object which has gone ready. * * This method handles the manual port configuration link up notifications. @@ -409,7 +409,7 @@ static void scic_sds_mpc_agent_link_up( * If the port has an invalid handle then the phy was not assigned to * a port. This is because the phy was not given the same SAS Address * as the other PHYs in the port. */ - if (port != SCI_INVALID_HANDLE) { + if (port != NULL) { port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy)); scic_sds_port_link_up(port, phy); @@ -425,7 +425,7 @@ static void scic_sds_mpc_agent_link_up( * @controller: This is the controller object that receives the link down * notification. * @port: This is the port object associated with the phy. If the is no - * associated port this is an SCI_INVALID_HANDLE. The port is an invalid + * associated port this is an NULL. The port is an invalid * handle only if the phy was never port of this port. This happens when * the phy is not broadcasting the same SAS address as the other phys in the * assigned port. @@ -443,7 +443,7 @@ static void scic_sds_mpc_agent_link_down( struct scic_sds_port *port, struct scic_sds_phy *phy) { - if (port != SCI_INVALID_HANDLE) { + if (port != NULL) { /* * If we can form a new port from the remainder of the phys then we want * to start the timer to allow the SCI User to cleanup old devices and @@ -573,7 +573,7 @@ static void scic_sds_apc_agent_configure_ports( port = scic_sds_port_configuration_agent_find_port(controller, phy); - if (port != SCI_INVALID_HANDLE) { + if (port != NULL) { if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) apc_activity = SCIC_SDS_APC_ADD_PHY; else @@ -680,7 +680,7 @@ static void scic_sds_apc_agent_configure_ports( * @controller: This is the controller object that receives the link up * notification. * @port: This is the port object associated with the phy. If the is no - * associated port this is an SCI_INVALID_HANDLE. + * associated port this is an NULL. * @phy: This is the phy object which has gone link up. * * This method handles the automatic port configuration for link up @@ -693,7 +693,7 @@ static void scic_sds_apc_agent_link_up( struct scic_sds_port *port, struct scic_sds_phy *phy) { - BUG_ON(port != SCI_INVALID_HANDLE); + BUG_ON(port != NULL); port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy)); @@ -705,7 +705,7 @@ static void scic_sds_apc_agent_link_up( * @controller: This is the controller object that receives the link down * notification. * @port: This is the port object associated with the phy. If the is no - * associated port this is an SCI_INVALID_HANDLE. + * associated port this is an NULL. * @phy: This is the phy object which has gone link down. * * This method handles the automatic port configuration link down @@ -721,7 +721,7 @@ static void scic_sds_apc_agent_link_down( { port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy)); - if (port != SCI_INVALID_HANDLE) { + if (port != NULL) { if (port_agent->phy_configured_mask & (1 << phy->phy_index)) { enum sci_status status; diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 21f03bc..cb26d0c 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1170,7 +1170,7 @@ enum sci_status scic_sds_remote_device_general_frame_handler( io_request = scic_sds_controller_get_io_request_from_tag( scic_sds_remote_device_get_controller(this_device), frame_header->tag); - if ((io_request == SCI_INVALID_HANDLE) + if ((io_request == NULL) || (io_request->target_device != this_device)) { /* * We could not map this tag to a valid IO request diff --git a/drivers/scsi/isci/core/scic_user_callback.h b/drivers/scsi/isci/core/scic_user_callback.h index 6eca5a9..4aa020e 100644 --- a/drivers/scsi/isci/core/scic_user_callback.h +++ b/drivers/scsi/isci/core/scic_user_callback.h @@ -600,7 +600,7 @@ void scic_cb_port_invalid_link_up( * @port: This parameter specifies the SCI port object for which the callback * is being invoked. For instances where the phy on which the primitive was * received is not part of a port, this parameter will be - * SCI_INVALID_HANDLE_T. + * NULL. * @phy: This parameter specifies the phy on which the primitive was received. * */ @@ -620,7 +620,7 @@ void scic_cb_port_bc_change_primitive_received( * phy. * @port: This parameter specifies the port object for which the user callback * is being invoked. There may be conditions where this parameter can be - * SCI_INVALID_HANDLE + * NULL * @phy: This parameter specifies the phy object for which the user callback is * being invoked. * @@ -638,7 +638,7 @@ void scic_cb_port_link_up( * phy. * @port: This parameter specifies the port object for which the user callback * is being invoked. There may be conditions where this parameter can be - * SCI_INVALID_HANDLE + * NULL * @phy: This parameter specifies the phy object for which the user callback is * being invoked. * diff --git a/drivers/scsi/isci/events.c b/drivers/scsi/isci/events.c index 75f9cd5..6911ea5 100644 --- a/drivers/scsi/isci/events.c +++ b/drivers/scsi/isci/events.c @@ -399,8 +399,7 @@ void scic_cb_port_invalid_link_up( * port. * @port: This parameter specifies the SCI port object for which the callback * is being invoked. For instances where the phy on which the primitive was - * received is not part of a port, this parameter will be - * SCI_INVALID_HANDLE_T. + * received is not part of a port, this parameter will be NULL. * @phy: This parameter specifies the phy on which the primitive was received. * */ @@ -430,7 +429,7 @@ void scic_cb_port_bc_change_primitive_received( * phy. * @port: This parameter specifies the port object for which the user callback * is being invoked. There may be conditions where this parameter can be - * SCI_INVALID_HANDLE + * NULL * @phy: This parameter specifies the phy object for which the user callback is * being invoked. * @@ -460,7 +459,7 @@ void scic_cb_port_link_up( * phy. * @port: This parameter specifies the port object for which the user callback * is being invoked. There may be conditions where this parameter can be - * SCI_INVALID_HANDLE + * NULL * @phy: This parameter specifies the phy object for which the user callback is * being invoked. * -- cgit v0.10.2 From 82d29928c1c1c6a6605895f8240a9943394244d7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Feb 2011 17:53:10 -0800 Subject: isci: kill SCI_IO_REQUEST_DATA_DIRECTION It's an unnecessary typedef that mirrors the kernel's enum dma_data_direction. Also cleanup some long variable names along the way. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_types.h b/drivers/scsi/isci/core/sci_types.h index e15dc0c..fda3680 100644 --- a/drivers/scsi/isci/core/sci_types.h +++ b/drivers/scsi/isci/core/sci_types.h @@ -61,13 +61,6 @@ #define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \ ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) -typedef enum { - SCI_IO_REQUEST_DATA_IN = 0, /* Read operation */ - SCI_IO_REQUEST_DATA_OUT, /* Write operation */ - SCI_IO_REQUEST_NO_DATA -} SCI_IO_REQUEST_DATA_DIRECTION; - - enum sci_controller_mode { SCI_MODE_SPEED, /* Optimized for performance */ SCI_MODE_SIZE /* Optimized for memory use */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index c696d24..7c5b61b 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -588,34 +588,34 @@ static void scu_ssp_reqeust_construct_task_context( * */ static void scu_ssp_io_request_construct_task_context( - struct scic_sds_request *this_request, - SCI_IO_REQUEST_DATA_DIRECTION data_direction, - u32 transfer_length_bytes) + struct scic_sds_request *sci_req, + enum dma_data_direction dir, + u32 len) { struct scu_task_context *task_context; - task_context = scic_sds_request_get_task_context(this_request); + task_context = scic_sds_request_get_task_context(sci_req); - scu_ssp_reqeust_construct_task_context(this_request, task_context); + scu_ssp_reqeust_construct_task_context(sci_req, task_context); task_context->ssp_command_iu_length = sizeof(struct sci_ssp_command_iu) / sizeof(u32); task_context->type.ssp.frame_type = SCI_SAS_COMMAND_FRAME; - switch (data_direction) { - case SCI_IO_REQUEST_DATA_IN: - case SCI_IO_REQUEST_NO_DATA: + switch (dir) { + case DMA_FROM_DEVICE: + case DMA_NONE: + default: task_context->task_type = SCU_TASK_TYPE_IOREAD; break; - case SCI_IO_REQUEST_DATA_OUT: + case DMA_TO_DEVICE: task_context->task_type = SCU_TASK_TYPE_IOWRITE; break; } - task_context->transfer_length_bytes = transfer_length_bytes; + task_context->transfer_length_bytes = len; - if (task_context->transfer_length_bytes > 0) { - scic_sds_request_build_sgl(this_request); - } + if (task_context->transfer_length_bytes > 0) + scic_sds_request_build_sgl(sci_req); } @@ -694,37 +694,35 @@ static void scu_ssp_task_request_construct_task_context( * * enum sci_status */ -static enum sci_status scic_io_request_construct_sata( - struct scic_sds_request *this_request, - u8 sat_protocol, - u32 transfer_length, - SCI_IO_REQUEST_DATA_DIRECTION data_direction, - bool copy_rx_frame) +static enum sci_status scic_io_request_construct_sata(struct scic_sds_request *sci_req, + u8 proto, u32 len, + enum dma_data_direction dir, + bool copy) { enum sci_status status = SCI_SUCCESS; - switch (sat_protocol) { + switch (proto) { case SAT_PROTOCOL_PIO_DATA_IN: case SAT_PROTOCOL_PIO_DATA_OUT: - status = scic_sds_stp_pio_request_construct(this_request, sat_protocol, copy_rx_frame); + status = scic_sds_stp_pio_request_construct(sci_req, proto, copy); break; case SAT_PROTOCOL_UDMA_DATA_IN: case SAT_PROTOCOL_UDMA_DATA_OUT: - status = scic_sds_stp_udma_request_construct(this_request, transfer_length, data_direction); + status = scic_sds_stp_udma_request_construct(sci_req, len, dir); break; case SAT_PROTOCOL_ATA_HARD_RESET: case SAT_PROTOCOL_SOFT_RESET: - status = scic_sds_stp_soft_reset_request_construct(this_request); + status = scic_sds_stp_soft_reset_request_construct(sci_req); break; case SAT_PROTOCOL_NON_DATA: - status = scic_sds_stp_non_data_request_construct(this_request); + status = scic_sds_stp_non_data_request_construct(sci_req); break; case SAT_PROTOCOL_FPDMA: - status = scic_sds_stp_ncq_request_construct(this_request, transfer_length, data_direction); + status = scic_sds_stp_ncq_request_construct(sci_req, len, dir); break; #if !defined(DISABLE_ATAPI) @@ -733,7 +731,7 @@ static enum sci_status scic_io_request_construct_sata( case SAT_PROTOCOL_PACKET_DMA_DATA_OUT: case SAT_PROTOCOL_PACKET_PIO_DATA_IN: case SAT_PROTOCOL_PACKET_PIO_DATA_OUT: - status = scic_sds_stp_packet_request_construct(this_request); + status = scic_sds_stp_packet_request_construct(sci_req); break; #endif @@ -743,10 +741,10 @@ static enum sci_status scic_io_request_construct_sata( case SAT_PROTOCOL_DEVICE_RESET: case SAT_PROTOCOL_RETURN_RESPONSE_INFO: default: - dev_err(scic_to_dev(this_request->owning_controller), + dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC IO Request 0x%p received un-handled " "SAT Protocl %d.\n", - __func__, this_request, sat_protocol); + __func__, sci_req, proto); status = SCI_FAILURE; break; @@ -945,35 +943,25 @@ enum sci_status scic_task_request_construct_ssp( } -enum sci_status scic_io_request_construct_basic_sata( - struct scic_sds_request *sci_req) +enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sci_req) { enum sci_status status; - struct scic_sds_stp_request *this_stp_request; - u8 sat_protocol; - u32 transfer_length; - SCI_IO_REQUEST_DATA_DIRECTION data_direction; - bool copy_rx_frame = false; + struct scic_sds_stp_request *stp_req; + u8 proto; + u32 len; + enum dma_data_direction dir; + bool copy = false; - this_stp_request = (struct scic_sds_stp_request *)sci_req; + stp_req = container_of(sci_req, typeof(*stp_req), parent); sci_req->protocol = SCIC_STP_PROTOCOL; - transfer_length = - scic_cb_io_request_get_transfer_length(sci_req->user_request); - data_direction = - scic_cb_io_request_get_data_direction(sci_req->user_request); + len = scic_cb_io_request_get_transfer_length(sci_req->user_request); + dir = scic_cb_io_request_get_data_direction(sci_req->user_request); + proto = scic_cb_request_get_sat_protocol(sci_req->user_request); + copy = scic_cb_io_request_do_copy_rx_frames(stp_req->parent.user_request); - sat_protocol = scic_cb_request_get_sat_protocol(sci_req->user_request); - copy_rx_frame = scic_cb_io_request_do_copy_rx_frames(this_stp_request->parent.user_request); - - status = scic_io_request_construct_sata( - sci_req, - sat_protocol, - transfer_length, - data_direction, - copy_rx_frame - ); + status = scic_io_request_construct_sata(sci_req, proto, len, dir, copy); if (status == SCI_SUCCESS) sci_base_state_machine_change_state( diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index c14f6f1..49c494c 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -288,7 +288,7 @@ void scic_sds_stp_non_ncq_request_construct( /** * - * @this_request: This parameter specifies the request to be constructed as an + * @sci_req: This parameter specifies the request to be constructed as an * optimized request. * @optimized_task_type: This parameter specifies whether the request is to be * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A @@ -298,24 +298,23 @@ void scic_sds_stp_non_ncq_request_construct( * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method * returns an indication as to whether the construction was successful. */ -static void scic_sds_stp_optimized_request_construct( - struct scic_sds_request *this_request, - u8 optimized_task_type, - u32 transfer_length, - SCI_IO_REQUEST_DATA_DIRECTION data_direction) +static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req, + u8 optimized_task_type, + u32 len, + enum dma_data_direction dir) { - struct scu_task_context *task_context = this_request->task_context_buffer; + struct scu_task_context *task_context = sci_req->task_context_buffer; /* Build the STP task context structure */ - scu_sata_reqeust_construct_task_context(this_request, task_context); + scu_sata_reqeust_construct_task_context(sci_req, task_context); /* Copy over the SGL elements */ - scic_sds_request_build_sgl(this_request); + scic_sds_request_build_sgl(sci_req); /* Copy over the number of bytes to be transfered */ - task_context->transfer_length_bytes = transfer_length; + task_context->transfer_length_bytes = len; - if (data_direction == SCI_IO_REQUEST_DATA_OUT) { + if (dir == DMA_TO_DEVICE) { /* * The difference between the DMA IN and DMA OUT request task type * values are consistent with the difference between FPDMA READ @@ -334,29 +333,24 @@ static void scic_sds_stp_optimized_request_construct( /** * - * @this_request: This parameter specifies the request to be constructed. + * @sci_req: This parameter specifies the request to be constructed. * * This method will construct the STP UDMA request and its associated TC data. * This method returns an indication as to whether the construction was * successful. SCI_SUCCESS Currently this method always returns this value. */ -enum sci_status scic_sds_stp_udma_request_construct( - struct scic_sds_request *this_request, - u32 transfer_length, - SCI_IO_REQUEST_DATA_DIRECTION data_direction) +enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, + u32 len, + enum dma_data_direction dir) { - scic_sds_stp_non_ncq_request_construct(this_request); + scic_sds_stp_non_ncq_request_construct(sci_req); - scic_sds_stp_optimized_request_construct( - this_request, - SCU_TASK_TYPE_DMA_IN, - transfer_length, - data_direction - ); + scic_sds_stp_optimized_request_construct(sci_req, SCU_TASK_TYPE_DMA_IN, + len, dir); sci_base_state_machine_construct( - &this_request->started_substate_machine, - &this_request->parent.parent, + &sci_req->started_substate_machine, + &sci_req->parent.parent, scic_sds_stp_request_started_udma_substate_table, SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE ); @@ -366,23 +360,19 @@ enum sci_status scic_sds_stp_udma_request_construct( /** * - * @this_request: This parameter specifies the request to be constructed. + * @sci_req: This parameter specifies the request to be constructed. * * This method will construct the STP UDMA request and its associated TC data. * This method returns an indication as to whether the construction was * successful. SCI_SUCCESS Currently this method always returns this value. */ -enum sci_status scic_sds_stp_ncq_request_construct( - struct scic_sds_request *this_request, - u32 transfer_length, - SCI_IO_REQUEST_DATA_DIRECTION data_direction) +enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req, + u32 len, + enum dma_data_direction dir) { - scic_sds_stp_optimized_request_construct( - this_request, - SCU_TASK_TYPE_FPDMAQ_READ, - transfer_length, - data_direction - ); + scic_sds_stp_optimized_request_construct(sci_req, + SCU_TASK_TYPE_FPDMAQ_READ, + len, dir); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index 5578d2b..0a12ff6 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -56,6 +56,7 @@ #ifndef _SCIC_SDS_STP_REQUEST_T_ #define _SCIC_SDS_STP_REQUEST_T_ +#include #include "intel_sata.h" #include "sci_types.h" #include "scic_sds_request.h" @@ -201,7 +202,7 @@ enum sci_status scic_sds_stp_pio_request_construct_pass_through( enum sci_status scic_sds_stp_udma_request_construct( struct scic_sds_request *this_request, u32 transfer_length, - SCI_IO_REQUEST_DATA_DIRECTION data_direction); + enum dma_data_direction dir); enum sci_status scic_sds_stp_non_data_request_construct( struct scic_sds_request *this_request); @@ -212,7 +213,7 @@ enum sci_status scic_sds_stp_soft_reset_request_construct( enum sci_status scic_sds_stp_ncq_request_construct( struct scic_sds_request *this_request, u32 transfer_length, - SCI_IO_REQUEST_DATA_DIRECTION data_direction); + enum dma_data_direction dir); void scu_stp_raw_request_construct_task_context( struct scic_sds_stp_request *this_request, diff --git a/drivers/scsi/isci/core/scic_user_callback.h b/drivers/scsi/isci/core/scic_user_callback.h index 4aa020e..4df7106 100644 --- a/drivers/scsi/isci/core/scic_user_callback.h +++ b/drivers/scsi/isci/core/scic_user_callback.h @@ -246,11 +246,8 @@ u32 scic_cb_io_request_get_transfer_length( * object. It is a cookie that allows the user to provide the necessary * information for this callback. * - * This method returns the value of SCI_IO_REQUEST_DATA_OUT or - * SCI_IO_REQUEST_DATA_IN, or SCI_IO_REQUEST_NO_DATA. */ -SCI_IO_REQUEST_DATA_DIRECTION scic_cb_io_request_get_data_direction( - void *scic_user_io_request); +enum dma_data_direction scic_cb_io_request_get_data_direction(void *req); #ifndef SCI_SGL_OPTIMIZATION_ENABLED /** diff --git a/drivers/scsi/isci/deprecated.c b/drivers/scsi/isci/deprecated.c index 847e687..0ee6679 100644 --- a/drivers/scsi/isci/deprecated.c +++ b/drivers/scsi/isci/deprecated.c @@ -139,16 +139,10 @@ u32 scic_cb_io_request_get_transfer_length( * @scic_user_io_request: This parameter points to the user's IO request * object. It is a cookie that allows the user to provide the necessary * information for this callback. - * - * This method returns the value of SCI_IO_REQUEST_DATA_OUT or - * SCI_IO_REQUEST_DATA_IN, or SCI_IO_REQUEST_NO_DATA. */ -SCI_IO_REQUEST_DATA_DIRECTION scic_cb_io_request_get_data_direction( - void *scic_user_io_request) +enum dma_data_direction scic_cb_io_request_get_data_direction(void *req) { - return isci_request_io_request_get_data_direction( - scic_user_io_request - ); + return isci_request_io_request_get_data_direction(req); } diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index e564121..f7ba047 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -1237,44 +1237,12 @@ u32 isci_request_io_request_get_transfer_length(struct isci_request *request) * * data direction for specified request. */ -SCI_IO_REQUEST_DATA_DIRECTION isci_request_io_request_get_data_direction( +enum dma_data_direction isci_request_io_request_get_data_direction( struct isci_request *request) { struct sas_task *task = isci_request_access_task(request); - SCI_IO_REQUEST_DATA_DIRECTION ret; - switch (task->data_dir) { - - case DMA_FROM_DEVICE: - ret = SCI_IO_REQUEST_DATA_IN; - dev_dbg(&request->isci_host->pdev->dev, - "%s: request=%p, FROM_DEVICE\n", - __func__, - request); - break; - - case DMA_TO_DEVICE: - ret = SCI_IO_REQUEST_DATA_OUT; - dev_dbg(&request->isci_host->pdev->dev, - "%s: request=%p, TO_DEVICE\n", - __func__, - request); - break; - - case DMA_BIDIRECTIONAL: - case DMA_NONE: - default: - ret = SCI_IO_REQUEST_NO_DATA; - dev_dbg(&request->isci_host->pdev->dev, - "%s: request=%p, unhandled direction case, " - "data_dir=%d\n", - __func__, - request, - task->data_dir); - break; - - } - return ret; + return task->data_dir; } /** diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 5079d4a..166295e 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -346,8 +346,7 @@ void isci_request_io_request_complete( u32 isci_request_io_request_get_transfer_length( struct isci_request *request); -SCI_IO_REQUEST_DATA_DIRECTION isci_request_io_request_get_data_direction( - struct isci_request *request); +enum dma_data_direction isci_request_io_request_get_data_direction(struct isci_request *req); /** * isci_request_io_request_get_next_sge() - This function is called by the sci -- cgit v0.10.2 From b5739b60507af0607fe99f1582b2dce4aa70e0b8 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Tue, 8 Feb 2011 09:31:55 -0700 Subject: isci: kill sci_types.h Signed-off-by: Edmund Nadolski [rebased after killing SCI_IO_REQUEST_DATA_DIRECTION] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h index 614e0a9..b58d4e8 100644 --- a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h +++ b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h @@ -64,7 +64,6 @@ */ -#include "sci_types.h" #include "sci_memory_descriptor_list.h" diff --git a/drivers/scsi/isci/core/sci_base_state_machine.h b/drivers/scsi/isci/core/sci_base_state_machine.h index cee38bd..13f6ee8 100644 --- a/drivers/scsi/isci/core/sci_base_state_machine.h +++ b/drivers/scsi/isci/core/sci_base_state_machine.h @@ -56,6 +56,8 @@ #ifndef _SCI_BASE_STATE_MACHINE_H_ #define _SCI_BASE_STATE_MACHINE_H_ +#include + /** * This file contains all structures, constants, or method declarations common * to all state machines defined in SCI. diff --git a/drivers/scsi/isci/core/sci_controller.h b/drivers/scsi/isci/core/sci_controller.h index 26c3548..5c7774e 100644 --- a/drivers/scsi/isci/core/sci_controller.h +++ b/drivers/scsi/isci/core/sci_controller.h @@ -64,8 +64,6 @@ */ -#include "sci_types.h" - struct sci_base_memory_descriptor_list; struct scic_sds_controller; diff --git a/drivers/scsi/isci/core/sci_memory_descriptor_list.h b/drivers/scsi/isci/core/sci_memory_descriptor_list.h index 44de1c1..a039998 100644 --- a/drivers/scsi/isci/core/sci_memory_descriptor_list.h +++ b/drivers/scsi/isci/core/sci_memory_descriptor_list.h @@ -64,7 +64,6 @@ */ -#include "sci_types.h" struct sci_base_memory_descriptor_list; diff --git a/drivers/scsi/isci/core/sci_object.h b/drivers/scsi/isci/core/sci_object.h index 9306942..801b01b 100644 --- a/drivers/scsi/isci/core/sci_object.h +++ b/drivers/scsi/isci/core/sci_object.h @@ -65,7 +65,6 @@ */ -#include "sci_types.h" #include "sci_status.h" /** diff --git a/drivers/scsi/isci/core/sci_types.h b/drivers/scsi/isci/core/sci_types.h deleted file mode 100644 index fda3680..0000000 --- a/drivers/scsi/isci/core/sci_types.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_TYPES_H_ -#define _SCI_TYPES_H_ - -#include - -#define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \ - ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) - -enum sci_controller_mode { - SCI_MODE_SPEED, /* Optimized for performance */ - SCI_MODE_SIZE /* Optimized for memory use */ -}; - -#endif /* _SCI_TYPES_H_ */ - diff --git a/drivers/scsi/isci/core/sci_util.h b/drivers/scsi/isci/core/sci_util.h index 67e2bad..8f2ba35 100644 --- a/drivers/scsi/isci/core/sci_util.h +++ b/drivers/scsi/isci/core/sci_util.h @@ -56,7 +56,7 @@ #ifndef _SCI_UTIL_H_ #define _SCI_UTIL_H_ -#include "sci_types.h" +#include /** * SCIC_SWAP_DWORD() - @@ -81,6 +81,11 @@ #define SCI_FIELD_OFFSET(type, field) ((unsigned long)&(((type *)0)->field)) + +#define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \ + ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) + + /** * sci_physical_address_add() - * diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index 4c16a50..8bd8560 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -65,7 +65,6 @@ */ -#include "sci_types.h" #include "sci_status.h" #include "intel_sas.h" #include "sci_controller_constants.h" diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h index 756b14f..1d459d6 100644 --- a/drivers/scsi/isci/core/scic_controller.h +++ b/drivers/scsi/isci/core/scic_controller.h @@ -64,7 +64,6 @@ */ -#include "sci_types.h" #include "sci_status.h" #include "sci_controller.h" #include "scic_config_parameters.h" @@ -74,6 +73,13 @@ struct scic_sds_phy; struct scic_sds_port; struct scic_sds_remote_device; + +enum sci_controller_mode { + SCI_MODE_SPEED, /* Optimized for performance */ + SCI_MODE_SIZE /* Optimized for memory use */ +}; + + /** * enum _SCIC_INTERRUPT_TYPE - This enumeration depicts the various types of * interrupts that are potentially supported by a SCI Core implementation. diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h index 7378f33..a52f33d 100644 --- a/drivers/scsi/isci/core/scic_io_request.h +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -64,7 +64,6 @@ */ -#include "sci_types.h" #include "sci_status.h" #include "intel_sas.h" diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index fec273b..13f8a30 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -64,7 +64,6 @@ */ -#include "sci_types.h" #include "sci_status.h" #include "intel_sata.h" diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index 34d22c0..e55abb6 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -64,7 +64,6 @@ */ -#include "sci_types.h" #include "sci_status.h" #include "intel_sas.h" diff --git a/drivers/scsi/isci/core/scic_remote_device.h b/drivers/scsi/isci/core/scic_remote_device.h index e8c0459..1401844 100644 --- a/drivers/scsi/isci/core/scic_remote_device.h +++ b/drivers/scsi/isci/core/scic_remote_device.h @@ -64,7 +64,6 @@ */ -#include "sci_types.h" #include "sci_status.h" #include "intel_sas.h" diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index afa45f9..cce0da6 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -56,6 +56,8 @@ #ifndef _SCIC_SDS_CONTROLLER_H_ #define _SCIC_SDS_CONTROLLER_H_ +#include + /** * This file contains the structures, constants and prototypes used for the * core controller object. diff --git a/drivers/scsi/isci/core/scic_sds_pci.h b/drivers/scsi/isci/core/scic_sds_pci.h index 2132677..bf0cbca 100644 --- a/drivers/scsi/isci/core/scic_sds_pci.h +++ b/drivers/scsi/isci/core/scic_sds_pci.h @@ -64,7 +64,6 @@ */ #include -#include "sci_types.h" struct scic_sds_controller; diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h index 59eacf8..9e759a3 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.h @@ -64,7 +64,6 @@ * */ -#include "sci_types.h" #include "sci_base_state.h" #include "sci_base_state_machine.h" diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.h b/drivers/scsi/isci/core/scic_sds_remote_node_table.h index 6ee5fba..9c02a6c 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_table.h +++ b/drivers/scsi/isci/core/scic_sds_remote_node_table.h @@ -63,7 +63,6 @@ * */ -#include "sci_types.h" #include "sci_controller_constants.h" /** diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 7c5b61b..2bd47f4 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -72,7 +72,6 @@ #include "scic_sds_unsolicited_frame_control.h" #include "scic_user_callback.h" #include "sci_environment.h" -#include "sci_types.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_constants.h" diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.h b/drivers/scsi/isci/core/scic_sds_smp_request.h index b7c5b83..bcad282c 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.h +++ b/drivers/scsi/isci/core/scic_sds_smp_request.h @@ -56,7 +56,6 @@ #define _SCIC_SDS_SMP_REQUEST_T_ #include "intel_sas.h" -#include "sci_types.h" #include "scic_sds_request.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h index fc18b3f..2a7aec9 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h @@ -56,7 +56,6 @@ #define _SCIC_SDS_STP_PACKET_REQUEST_H_ #include "intel_sas.h" -#include "sci_types.h" #include "scic_sds_stp_request.h" /** diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 49c494c..0b6b055 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -69,7 +69,6 @@ #include "scic_sds_unsolicited_frame_control.h" #include "scic_user_callback.h" #include "sci_environment.h" -#include "sci_types.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index 0a12ff6..4a4c68a 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -58,7 +58,6 @@ #include #include "intel_sata.h" -#include "sci_types.h" #include "scic_sds_request.h" /** diff --git a/drivers/scsi/isci/core/scic_task_request.h b/drivers/scsi/isci/core/scic_task_request.h index ef76cb6..7e6d20a 100644 --- a/drivers/scsi/isci/core/scic_task_request.h +++ b/drivers/scsi/isci/core/scic_task_request.h @@ -65,7 +65,6 @@ */ -#include "sci_types.h" #include "sci_status.h" struct scic_sds_request; diff --git a/drivers/scsi/isci/core/scic_user_callback.h b/drivers/scsi/isci/core/scic_user_callback.h index 4df7106..ec4eb27 100644 --- a/drivers/scsi/isci/core/scic_user_callback.h +++ b/drivers/scsi/isci/core/scic_user_callback.h @@ -64,8 +64,8 @@ */ -#include "sci_types.h" #include "sci_status.h" +#include "scic_io_request.h" struct scic_sds_request; struct scic_sds_phy; diff --git a/drivers/scsi/isci/core/scu_registers.h b/drivers/scsi/isci/core/scu_registers.h index 175d2b9..de2ce93 100644 --- a/drivers/scsi/isci/core/scu_registers.h +++ b/drivers/scsi/isci/core/scu_registers.h @@ -63,7 +63,6 @@ * */ -#include "sci_types.h" #include "scu_viit_data.h" diff --git a/drivers/scsi/isci/core/scu_remote_node_context.h b/drivers/scsi/isci/core/scu_remote_node_context.h index 8006f2e..33745ad 100644 --- a/drivers/scsi/isci/core/scu_remote_node_context.h +++ b/drivers/scsi/isci/core/scu_remote_node_context.h @@ -62,7 +62,6 @@ * * */ -#include "sci_types.h" /** * struct ssp_remote_node_context - This structure contains the SCU hardware diff --git a/drivers/scsi/isci/core/scu_task_context.h b/drivers/scsi/isci/core/scu_task_context.h index d08c51b..818a575 100644 --- a/drivers/scsi/isci/core/scu_task_context.h +++ b/drivers/scsi/isci/core/scu_task_context.h @@ -63,7 +63,6 @@ * */ -#include "sci_types.h" /** * enum SCU_SSP_TASK_TYPE - This enumberation defines the various SSP task diff --git a/drivers/scsi/isci/core/scu_unsolicited_frame.h b/drivers/scsi/isci/core/scu_unsolicited_frame.h index 590ea02..187c4f0 100644 --- a/drivers/scsi/isci/core/scu_unsolicited_frame.h +++ b/drivers/scsi/isci/core/scu_unsolicited_frame.h @@ -64,7 +64,7 @@ #ifndef _SCU_UNSOLICITED_FRAME_H_ #define _SCU_UNSOLICITED_FRAME_H_ -#include "sci_types.h" +#include /** * diff --git a/drivers/scsi/isci/core/scu_viit_data.h b/drivers/scsi/isci/core/scu_viit_data.h index 4601d19..c959d91 100644 --- a/drivers/scsi/isci/core/scu_viit_data.h +++ b/drivers/scsi/isci/core/scu_viit_data.h @@ -63,7 +63,6 @@ * */ -#include "sci_types.h" #define SCU_VIIT_ENTRY_ID_MASK (0xC0000000) #define SCU_VIIT_ENTRY_ID_SHIFT (30) diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 7d984f4..21371e7 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -79,7 +79,6 @@ #include #include -#include "sci_types.h" #include "sci_base_controller.h" #include "scic_controller.h" #include "host.h" -- cgit v0.10.2 From 6e473dd112f95806a4bfd12eced5b73632d6c032 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 11 Feb 2011 18:04:28 -0800 Subject: isci: removing unused loglevel module param We no longer use the loglevel parameter. Remove. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 07b072f..e3d9b15 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -98,8 +98,6 @@ static struct pci_driver isci_pci_driver = { }; /* linux isci specific settings */ -int loglevel = 3; -module_param(loglevel, int, S_IRUGO | S_IWUSR); #if defined(CONFIG_PBG_HBA_A0) int isci_si_rev = ISCI_SI_REVA0; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 21371e7..6aee3c9 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -85,7 +85,6 @@ #include "timers.h" #include "sci_status.h" -extern int loglevel; extern struct kmem_cache *isci_kmem_cache; #define ISCI_FW_NAME "isci/isci_firmware.bin" -- cgit v0.10.2 From 7fbafaa51960cd2f2a7afa63829b4135c9682a75 Mon Sep 17 00:00:00 2001 From: Henryk Dembkowski Date: Sat, 12 Feb 2011 11:50:05 -0800 Subject: isci: remote device and node cleanup step1 c99 the struct initializers (scic_sds_remote_device_state_handler_table[]): 1/ allows grep to consistently show method name associations. The naming is mostly consistent (except when it isn't) so this guarantees coverage of present and future exception cases. 2/ let's the compiler guarantee that the state table array entry correlates with an actual state name and detect accidental reordering or deletion of states. 3/ allows default handler's to be identified easily Change names from upper to low letters Cleanup empty lines Signed-off-by: Henryk Dembkowski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_remote_device.h b/drivers/scsi/isci/core/sci_base_remote_device.h index fe6614b..25c6ddd 100644 --- a/drivers/scsi/isci/core/sci_base_remote_device.h +++ b/drivers/scsi/isci/core/sci_base_remote_device.h @@ -130,9 +130,6 @@ enum sci_base_remote_device_states { * Simply the final state for the base remote device state machine. */ SCI_BASE_REMOTE_DEVICE_STATE_FINAL, - - SCI_BASE_REMOTE_DEVICE_MAX_STATES - }; /** diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index cb26d0c..b824e57 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1707,168 +1707,142 @@ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_h /* --------------------------------------------------------------------------- */ -struct scic_sds_remote_device_state_handler -scic_sds_remote_device_state_handler_table[SCI_BASE_REMOTE_DEVICE_MAX_STATES] = -{ - /* SCI_BASE_REMOTE_DEVICE_STATE_INITIAL */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_default_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_default_event_handler, - scic_sds_remote_device_default_frame_handler +const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { + [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_default_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, - /* SCI_BASE_REMOTE_DEVICE_STATE_STOPPED */ - { - { - scic_sds_remote_device_stopped_state_start_handler, - scic_sds_remote_device_stopped_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_stopped_state_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_default_event_handler, - scic_sds_remote_device_default_frame_handler + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { + .parent.start_handler = scic_sds_remote_device_stopped_state_start_handler, + .parent.stop_handler = scic_sds_remote_device_stopped_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, - /* SCI_BASE_REMOTE_DEVICE_STATE_STARTING */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_starting_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_remote_device_default_frame_handler + [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_starting_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, - /* SCI_BASE_REMOTE_DEVICE_STATE_READY */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_ready_state_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_ready_state_start_io_handler, - scic_sds_remote_device_ready_state_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_ready_state_start_task_handler, - scic_sds_remote_device_ready_state_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_remote_device_general_frame_handler, + [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, + .parent.complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, + .parent.complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler, }, - /* SCI_BASE_REMOTE_DEVICE_STATE_STOPPING */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_stopping_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_stopping_state_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_stopping_state_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_remote_device_general_frame_handler + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_stopping_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler }, - /* SCI_BASE_REMOTE_DEVICE_STATE_FAILED */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_default_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_default_event_handler, - scic_sds_remote_device_general_frame_handler + [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_default_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler }, - /* SCI_BASE_REMOTE_DEVICE_STATE_RESETTING */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_resetting_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_resetting_state_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_resetting_state_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_resetting_state_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_default_event_handler, - scic_sds_remote_device_general_frame_handler + [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_resetting_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler }, - /* SCI_BASE_REMOTE_DEVICE_STATE_FINAL */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_default_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_default_event_handler, - scic_sds_remote_device_default_frame_handler + [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_default_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler } }; diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index 44185a2..8aa0a5e 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -87,20 +87,21 @@ enum SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATES { SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL, /** - * This is the ready operational substate for the remote device. This is the - * normal operational state for a remote device. + * This is the ready operational substate for the remote device. + * This is the normal operational state for a remote device. */ SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL, /** - * This is the suspended state for the remote device. This is the state that - * the device is placed in when a RNC suspend is received by the SCU hardware. + * This is the suspended state for the remote device. This is the state + * that the device is placed in when a RNC suspend is received by + * the SCU hardware. */ SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED, /** - * This is the final state that the device is placed in before a change to the - * base state machine. + * This is the final state that the device is placed in before a change + * to the base state machine. */ SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL, @@ -110,8 +111,8 @@ enum SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATES { /** * enum SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATES - * - * This is the enumeration for the struct scic_sds_remote_device ready substates for - * the STP remote device. + * This is the enumeration for the struct scic_sds_remote_device ready substates + * for the STP remote device. */ enum SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATES { /** @@ -161,13 +162,11 @@ enum SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATES { SCIC_SDS_STP_REMOTE_DEVICE_READY_MAX_SUBSTATES }; - /** * enum SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATES - * * This is the enumeration of the ready substates for the SMP REMOTE DEVICE. */ - enum SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATES { /** * This is the ready operational substate for the remote device. This is the @@ -184,9 +183,6 @@ enum SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATES { SCIC_SDS_SMP_REMOTE_DEVICE_READY_MAX_SUBSTATES }; - - - /** * struct scic_sds_remote_device - This structure contains the data for an SCU * implementation of the SCU Core device data. @@ -223,21 +219,22 @@ struct scic_sds_remote_device { struct sci_sas_address device_address; /** - * This filed is assinged the value of true if the device is directly attached - * to the port. + * This filed is assinged the value of true if the device is directly + * attached to the port. */ bool is_direct_attached; #if !defined(DISABLE_ATAPI) /** - * This filed is assinged the value of true if the device is an ATAPI device. + * This filed is assinged the value of true if the device is an ATAPI + * device. */ bool is_atapi; #endif /** - * This filed contains a pointer back to the port to which this device is - * assigned. + * This filed contains a pointer back to the port to which this device + * is assigned. */ struct scic_sds_port *owning_port; @@ -284,29 +281,28 @@ struct scic_sds_remote_device { * This field maintains the set of state handlers for the remote device * object. These are changed each time the remote device enters a new state. */ - struct scic_sds_remote_device_state_handler *state_handlers; + const struct scic_sds_remote_device_state_handler *state_handlers; }; - -typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_HANDLER_T)( +typedef enum sci_status (*scic_sds_remote_device_handler_t)( struct scic_sds_remote_device *this_device); -typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_SUSPEND_HANDLER_T)( +typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)( struct scic_sds_remote_device *this_device, u32 suspend_type); -typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_RESUME_HANDLER_T)( +typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)( struct scic_sds_remote_device *this_device); -typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_FRAME_HANDLER_T)( +typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)( struct scic_sds_remote_device *this_device, u32 frame_index); -typedef enum sci_status (*SCIC_SDS_REMOTE_DEVICE_EVENT_HANDLER_T)( +typedef enum sci_status (*scic_sds_remote_device_event_handler_t)( struct scic_sds_remote_device *this_device, u32 event_code); -typedef void (*SCIC_SDS_REMOTE_DEVICE_READY_NOT_READY_HANDLER_T)( +typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( struct scic_sds_remote_device *this_device); /** @@ -318,23 +314,18 @@ typedef void (*SCIC_SDS_REMOTE_DEVICE_READY_NOT_READY_HANDLER_T)( */ struct scic_sds_remote_device_state_handler { struct sci_base_remote_device_state_handler parent; - - SCIC_SDS_REMOTE_DEVICE_SUSPEND_HANDLER_T suspend_handler; - SCIC_SDS_REMOTE_DEVICE_RESUME_HANDLER_T resume_handler; - - SCIC_SDS_REMOTE_DEVICE_EVENT_HANDLER_T event_handler; - SCIC_SDS_REMOTE_DEVICE_FRAME_HANDLER_T frame_handler; - + scic_sds_remote_device_suspend_handler_t suspend_handler; + scic_sds_remote_device_resume_handler_t resume_handler; + scic_sds_remote_device_event_handler_t event_handler; + scic_sds_remote_device_frame_handler_t frame_handler; }; - extern const struct sci_base_state scic_sds_remote_device_state_table[]; extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[]; extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[]; extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; -extern struct scic_sds_remote_device_state_handler - scic_sds_remote_device_state_handler_table[]; +extern const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[]; extern struct scic_sds_remote_device_state_handler scic_sds_ssp_remote_device_ready_substate_handler_table[]; extern struct scic_sds_remote_device_state_handler @@ -480,10 +471,6 @@ extern struct scic_sds_remote_device_state_handler #define scic_sds_remote_device_set_working_request(device, request) \ ((device)->working_request = (request)) -/* --------------------------------------------------------------------------- */ - - - enum sci_status scic_sds_remote_device_frame_handler( struct scic_sds_remote_device *this_device, u32 frame_index); @@ -525,10 +512,6 @@ bool scic_sds_remote_device_is_atapi( #define scic_sds_remote_device_is_atapi(this_device) false #endif /* !defined(DISABLE_ATAPI) */ -/* --------------------------------------------------------------------------- */ - -/* --------------------------------------------------------------------------- */ - void scic_sds_remote_device_start_request( struct scic_sds_remote_device *this_device, struct scic_sds_request *the_request, @@ -540,7 +523,6 @@ void scic_sds_remote_device_continue_request( enum sci_status scic_sds_remote_device_default_start_handler( struct sci_base_remote_device *this_device); - enum sci_status scic_sds_remote_device_default_fail_handler( struct sci_base_remote_device *this_device); @@ -577,8 +559,6 @@ enum sci_status scic_sds_remote_device_default_frame_handler( struct scic_sds_remote_device *this_device, u32 frame_index); -/* --------------------------------------------------------------------------- */ - enum sci_status scic_sds_remote_device_ready_state_stop_handler( struct sci_base_remote_device *device); @@ -596,7 +576,4 @@ enum sci_status scic_sds_remote_device_general_event_handler( enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler( struct scic_sds_remote_device *this_device); -/* --------------------------------------------------------------------------- */ - - #endif /* _SCIC_SDS_REMOTE_DEVICE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/core/scic_sds_remote_node_context.c index 79fe9a8..7fec322 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.c +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.c @@ -195,7 +195,7 @@ void scic_sds_remote_node_context_construct_buffer( */ static void scic_sds_remote_node_context_setup_to_resume( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { if (this_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { @@ -216,7 +216,7 @@ static void scic_sds_remote_node_context_setup_to_resume( */ static void scic_sds_remote_node_context_setup_to_destory( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { this_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL; @@ -234,7 +234,7 @@ static void scic_sds_remote_node_context_setup_to_destory( */ static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { if (this_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { @@ -251,7 +251,7 @@ static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( static enum sci_status scic_sds_remote_node_context_default_destruct_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { dev_warn(scirdev_to_dev(this_rnc->device), @@ -270,7 +270,7 @@ static enum sci_status scic_sds_remote_node_context_default_destruct_handler( static enum sci_status scic_sds_remote_node_context_default_suspend_handler( struct scic_sds_remote_node_context *this_rnc, u32 suspend_type, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { dev_warn(scirdev_to_dev(this_rnc->device), @@ -285,7 +285,7 @@ static enum sci_status scic_sds_remote_node_context_default_suspend_handler( static enum sci_status scic_sds_remote_node_context_default_resume_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { dev_warn(scirdev_to_dev(this_rnc->device), @@ -372,7 +372,7 @@ static enum sci_status scic_sds_remote_node_context_success_start_task_handler( */ static enum sci_status scic_sds_remote_node_context_general_destruct_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { scic_sds_remote_node_context_setup_to_destory( @@ -391,7 +391,7 @@ static enum sci_status scic_sds_remote_node_context_general_destruct_handler( static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { if (this_rnc->remote_node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { @@ -449,7 +449,7 @@ static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( static enum sci_status scic_sds_remote_node_context_invalidating_state_destruct_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { scic_sds_remote_node_context_setup_to_destory( @@ -575,7 +575,7 @@ static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler static enum sci_status scic_sds_remote_node_context_ready_state_suspend_handler( struct scic_sds_remote_node_context *this_rnc, u32 suspend_type, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { this_rnc->user_callback = the_callback; @@ -662,7 +662,7 @@ static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { enum sci_status status; @@ -737,7 +737,7 @@ static enum sci_status scic_sds_remote_node_context_suspended_start_task_handler static enum sci_status scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { scic_sds_remote_node_context_setup_to_resume( @@ -761,7 +761,7 @@ static enum sci_status scic_sds_remote_node_context_tx_rx_suspended_state_resume */ static enum sci_status scic_sds_remote_node_context_await_suspension_state_resume_handler( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter) { scic_sds_remote_node_context_setup_to_resume( diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h index 9e759a3..86c6d75 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.h @@ -67,8 +67,6 @@ #include "sci_base_state.h" #include "sci_base_state_machine.h" -/* --------------------------------------------------------------------------- */ - /** * * @@ -85,77 +83,71 @@ struct scic_sds_request; struct scic_sds_remote_device; struct scic_sds_remote_node_context; -typedef void (*SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK)(void *); +typedef void (*scics_sds_remote_node_context_callback)(void *); -typedef enum sci_status (*SCIC_SDS_REMOTE_NODE_CONTEXT_OPERATION)( +typedef enum sci_status (*scic_sds_remote_node_context_operation)( struct scic_sds_remote_node_context *this_rnc, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter ); -typedef enum sci_status (*SCIC_SDS_REMOTE_NODE_CONTEXT_SUSPEND_OPERATION)( +typedef enum sci_status (*scic_sds_remote_node_context_suspend_operation)( struct scic_sds_remote_node_context *this_rnc, u32 suspension_type, - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK the_callback, + scics_sds_remote_node_context_callback the_callback, void *callback_parameter ); -typedef enum sci_status (*SCIC_SDS_REMOTE_NODE_CONTEXT_IO_REQUEST)( +typedef enum sci_status (*scic_sds_remote_node_context_io_request)( struct scic_sds_remote_node_context *this_rnc, struct scic_sds_request *the_request ); -typedef enum sci_status (*SCIC_SDS_REMOTE_NODE_CONTEXT_EVENT_HANDLER)( +typedef enum sci_status (*scic_sds_remote_node_context_event_handler)( struct scic_sds_remote_node_context *this_rnc, u32 event_code ); -/* --------------------------------------------------------------------------- */ - struct scic_sds_remote_node_context_handlers { /** * This handle is invoked to stop the RNC. The callback is invoked when after * the hardware notification that the RNC has been invalidated. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_OPERATION destruct_handler; + scic_sds_remote_node_context_operation destruct_handler; /** * This handler is invoked when there is a request to suspend the RNC. The * callback is invoked after the hardware notification that the remote node is * suspended. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_SUSPEND_OPERATION suspend_handler; + scic_sds_remote_node_context_suspend_operation suspend_handler; /** * This handler is invoked when there is a request to resume the RNC. The * callback is invoked when after the RNC has reached the ready state. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_OPERATION resume_handler; + scic_sds_remote_node_context_operation resume_handler; /** * This handler is invoked when there is a request to start an io request * operation. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_IO_REQUEST start_io_handler; + scic_sds_remote_node_context_io_request start_io_handler; /** * This handler is invoked when there is a request to start a task request * operation. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_IO_REQUEST start_task_handler; + scic_sds_remote_node_context_io_request start_task_handler; /** * This handler is invoked where there is an RNC event that must be processed. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_EVENT_HANDLER event_handler; + scic_sds_remote_node_context_event_handler event_handler; }; -/* --------------------------------------------------------------------------- */ - /** - * - * * This is the enumeration of the remote node context states. */ enum scis_sds_remote_node_context_states { @@ -232,8 +224,6 @@ enum SCIC_SDS_REMOTE_NODE_CONTEXT_DESTINATION_STATE { * associated with the remote node context object. The remote node context * (RNC) object models the the remote device information necessary to manage * the silicon RNC. - * - * */ struct scic_sds_remote_node_context { /* @@ -273,7 +263,7 @@ struct scic_sds_remote_node_context { * This field contains the callback function that the user requested to be * called when the requested state transition is complete. */ - SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK user_callback; + scics_sds_remote_node_context_callback user_callback; /** * This field contains the parameter that is called when the user requested @@ -289,16 +279,12 @@ struct scic_sds_remote_node_context { struct scic_sds_remote_node_context_handlers *state_handlers; }; -/* --------------------------------------------------------------------------- */ - extern const struct sci_base_state scic_sds_remote_node_context_state_table[]; extern struct scic_sds_remote_node_context_handlers scic_sds_remote_node_context_state_handler_table[ SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES]; -/* --------------------------------------------------------------------------- */ - void scic_sds_remote_node_context_construct( struct scic_sds_remote_device *device, struct scic_sds_remote_node_context *rnc, @@ -307,7 +293,6 @@ void scic_sds_remote_node_context_construct( void scic_sds_remote_node_context_construct_buffer( struct scic_sds_remote_node_context *rnc); - bool scic_sds_remote_node_context_is_ready( struct scic_sds_remote_node_context *this_rnc); @@ -335,7 +320,4 @@ bool scic_sds_remote_node_context_is_ready( #define scic_sds_remote_node_context_start_task(rnc, task) \ ((rnc)->state_handlers->start_task_handler(rnc, task)) -/* --------------------------------------------------------------------------- */ - #endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index abe8f33..1320c95 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -192,7 +192,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_h scic_sds_remote_node_context_resume( this_device->rnc, - (SCICS_SDS_REMOTE_NODE_CONTEXT_CALLBACK) + (scics_sds_remote_node_context_callback) scic_sds_remote_device_continue_request, this_device); } -- cgit v0.10.2 From 2f02f556abd4411d4d348b3bd9ce4d21c316f447 Mon Sep 17 00:00:00 2001 From: Henryk Dembkowski Date: Sat, 12 Feb 2011 11:50:07 -0800 Subject: isci: coding style changes for remote device Change names from upper to low letters Signed-off-by: Henryk Dembkowski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index 8aa0a5e..aed4eb6 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -75,12 +75,12 @@ struct scic_sds_request; struct scic_sds_remote_device_state_handler; /** - * enum SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATES - + * enum scic_sds_ssp_remote_device_ready_substates - * * This is the enumeration of the ready substates for the * struct scic_sds_remote_device. */ -enum SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATES { +enum scic_sds_ssp_remote_device_ready_substates { /** * This is the initial state for the remote device ready substate. */ @@ -109,12 +109,12 @@ enum SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATES { }; /** - * enum SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATES - + * enum scic_sds_stp_remote_device_ready_substates - * * This is the enumeration for the struct scic_sds_remote_device ready substates * for the STP remote device. */ -enum SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATES { +enum scic_sds_stp_remote_device_ready_substates { /** * This is the idle substate for the stp remote device. When there are no * active IO for the device it is is in this state. @@ -163,11 +163,11 @@ enum SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATES { }; /** - * enum SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATES - + * enum scic_sds_smp_remote_device_ready_substates - * * This is the enumeration of the ready substates for the SMP REMOTE DEVICE. */ -enum SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATES { +enum scic_sds_smp_remote_device_ready_substates { /** * This is the ready operational substate for the remote device. This is the * normal operational state for a remote device. -- cgit v0.10.2 From db48255b32a2664d8b321a51f46084a669e11ac6 Mon Sep 17 00:00:00 2001 From: Henryk Dembkowski Date: Sat, 12 Feb 2011 11:50:09 -0800 Subject: isci: c99 tables cleanup step1 scic_sds_stp_remote_device_ready_substate_handler_table[] scic_sds_smp_remote_device_ready_substate_handler_table[] c99 the struct initializers: 1/ allows grep to consistently show method name associations. The naming is mostly consistent (except when it isn't) so this guarantees coverage of present and future exception cases. 2/ let's the compiler guarantee that the state table array entry correlates with an actual state name and detect accidental reordering or deletion of states. 3/ allows default handler's to be identified easily Signed-off-by: Henryk Dembkowski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index aed4eb6..d91570f 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -158,8 +158,6 @@ enum scic_sds_stp_remote_device_ready_substates { * coming to be recovered from certain hardware specific error. */ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET, - - SCIC_SDS_STP_REMOTE_DEVICE_READY_MAX_SUBSTATES }; /** @@ -179,8 +177,6 @@ enum scic_sds_smp_remote_device_ready_substates { * the device is placed in when a RNC suspend is received by the SCU hardware. */ SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD, - - SCIC_SDS_SMP_REMOTE_DEVICE_READY_MAX_SUBSTATES }; /** @@ -326,12 +322,8 @@ extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_tab extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; extern const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[]; -extern struct scic_sds_remote_device_state_handler - scic_sds_ssp_remote_device_ready_substate_handler_table[]; -extern struct scic_sds_remote_device_state_handler - scic_sds_stp_remote_device_ready_substate_handler_table[]; -extern struct scic_sds_remote_device_state_handler - scic_sds_smp_remote_device_ready_substate_handler_table[]; +extern const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[]; +extern const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[]; /** * scic_sds_remote_device_increment_request_count() - diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index 7cf78d3..b0ed9d1 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -214,49 +214,40 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl /* --------------------------------------------------------------------------- */ -struct scic_sds_remote_device_state_handler -scic_sds_smp_remote_device_ready_substate_handler_table[ - SCIC_SDS_SMP_REMOTE_DEVICE_READY_MAX_SUBSTATES] = -{ - /* SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, - scic_sds_remote_device_default_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_remote_device_default_frame_handler +const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[] = { + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, + .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, - /* SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_default_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, - scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_remote_device_default_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_smp_remote_device_ready_cmd_substate_frame_handler + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_default_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, + .parent.complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler } }; /* diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index 1320c95..6aa170e 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -547,131 +547,110 @@ enum sci_status scic_sds_stp_remote_device_ready_atapi_error_substate_event_hand /* --------------------------------------------------------------------------- */ -struct scic_sds_remote_device_state_handler -scic_sds_stp_remote_device_ready_substate_handler_table[ - SCIC_SDS_STP_REMOTE_DEVICE_READY_MAX_SUBSTATES] = -{ - /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_ready_state_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, - scic_sds_remote_device_default_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_stp_remote_device_ready_substate_start_request_handler, - scic_sds_remote_device_default_complete_request_handler - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_stp_remote_device_ready_idle_substate_event_handler, - scic_sds_remote_device_default_frame_handler +const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = { + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, + .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, - /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_ready_state_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, - scic_sds_stp_remote_device_complete_request, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_stp_remote_device_ready_substate_start_request_handler, - scic_sds_stp_remote_device_complete_request, - }, - scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_stp_remote_device_ready_cmd_substate_frame_handler + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, + .parent.complete_io_handler = scic_sds_stp_remote_device_complete_request, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, - /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_ready_state_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, - scic_sds_stp_remote_device_complete_request, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_stp_remote_device_ready_substate_start_request_handler, - scic_sds_stp_remote_device_complete_request - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_stp_remote_device_ready_ncq_substate_frame_handler + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, + .parent.complete_io_handler = scic_sds_stp_remote_device_complete_request, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, - /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_ready_state_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_stp_remote_device_complete_request, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_stp_remote_device_ready_substate_start_request_handler, - scic_sds_stp_remote_device_complete_request - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_remote_device_general_frame_handler + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_stp_remote_device_complete_request, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler }, #if !defined(DISABLE_ATAPI) - /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_ready_state_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_remote_device_default_start_request_handler, - scic_sds_stp_remote_device_complete_request, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_stp_remote_device_ready_substate_start_request_handler, - scic_sds_stp_remote_device_complete_request - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler, - scic_sds_remote_device_general_frame_handler + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, + .parent.complete_io_handler = scic_sds_stp_remote_device_complete_request, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler }, #endif - /* SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET */ - { - { - scic_sds_remote_device_default_start_handler, - scic_sds_remote_device_ready_state_stop_handler, - scic_sds_remote_device_default_fail_handler, - scic_sds_remote_device_default_destruct_handler, - scic_sds_remote_device_ready_state_reset_handler, - scic_sds_remote_device_default_reset_complete_handler, - scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, - scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, - scic_sds_remote_device_default_continue_request_handler, - scic_sds_stp_remote_device_ready_substate_start_request_handler, - scic_sds_stp_remote_device_complete_request - }, - scic_sds_remote_device_default_suspend_handler, - scic_sds_remote_device_default_resume_handler, - scic_sds_remote_device_general_event_handler, - scic_sds_remote_device_general_frame_handler + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { + .parent.start_handler = scic_sds_remote_device_default_start_handler, + .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .parent.fail_handler = scic_sds_remote_device_default_fail_handler, + .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, + .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .parent.start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, + .parent.complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, + .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler } }; -- cgit v0.10.2 From e574a8c18069bcc04537c4a3d7c5dbab2265007c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 12 Feb 2011 11:50:11 -0800 Subject: isci: cleanup core consolidation leftovers Remove duplicated license and header file includes that were leftover from commit 4c1db2d0 "isci: consolidate core" (in the isci.git historical branch). Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index b824e57..5fc1baa 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -53,23 +53,22 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the implementation of remote device methods. - * - * - */ - #include "intel_sas.h" -#include "sci_util.h" -#include "sci_environment.h" -#include "scic_port.h" +#include "scic_controller.h" #include "scic_phy.h" +#include "scic_port.h" #include "scic_remote_device.h" -#include "scic_sds_port.h" +#include "scic_sds_controller.h" #include "scic_sds_phy.h" +#include "scic_sds_port.h" #include "scic_sds_remote_device.h" +#include "scic_sds_remote_node_context.h" #include "scic_sds_request.h" -#include "scic_sds_controller.h" +#include "scic_user_callback.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_event_codes.h" + #define SCIC_SDS_REMOTE_DEVICE_RESET_TIMEOUT (1000) @@ -501,82 +500,6 @@ bool scic_sds_remote_device_is_atapi( } } #endif -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains the state handlers for the struct scic_sds_remote_device for the - * base state machine. - * - * - */ - -#include "sci_environment.h" -#include "scic_user_callback.h" -#include "scic_controller.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_controller.h" -#include "scic_sds_port.h" -#include "scic_sds_request.h" -#include "scic_sds_remote_node_context.h" -#include "scu_event_codes.h" - -/* - * ***************************************************************************** - * * PROTECTED METHODS - * ***************************************************************************** */ /** * @@ -1846,76 +1769,6 @@ const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_h } }; -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains the operations that are taken on the enter and exit state - * transitions for the struct sci_base_remote_device state machine. - * - * - */ - -#include "scic_remote_device.h" -#include "scic_user_callback.h" -#include "scic_sds_controller.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_request.h" -#include "scic_sds_controller.h" -#include "scic_sds_port.h" - /** * * @object: This is the struct sci_base_object that is cast into a diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index b0ed9d1..ea608c1 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -53,23 +53,17 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains This file contains the ready substate handlers for a SMP - * device. - * - * - */ - -#include "sci_environment.h" -#include "scic_user_callback.h" -#include "scic_sds_remote_device.h" +#include "scic_remote_device.h" #include "scic_sds_controller.h" #include "scic_sds_port.h" +#include "scic_sds_remote_device.h" #include "scic_sds_request.h" +#include "scic_user_callback.h" +#include "sci_environment.h" +#include "sci_util.h" #include "scu_event_codes.h" #include "scu_task_context.h" - /* * ***************************************************************************** * * SMP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS @@ -250,75 +244,6 @@ const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_rea .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler } }; -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains the enter and exit functions for the - * struct scic_sds_remote_device ready substate machine. - * - * - */ - -#include "scic_remote_device.h" -#include "scic_user_callback.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_controller.h" -#include "scic_sds_port.h" -#include "sci_util.h" -#include "sci_environment.h" /** * diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index 0d6441c..a826e4b 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -53,18 +53,12 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the task management substate handlers for the - * SCIC_SDS_IO_REQUEST object. - * - * - */ - #include "intel_sas.h" -#include "sci_environment.h" -#include "scic_sds_request.h" +#include "sci_base_state_machine.h" #include "scic_controller.h" #include "scic_sds_controller.h" +#include "scic_sds_request.h" +#include "sci_environment.h" #include "scu_completion_codes.h" #include "scu_task_context.h" @@ -220,72 +214,6 @@ const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started } }; -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains the enter/exit methods associated with each of the task - * management raw request states. For more information on the task - * management request state machine please refer to scic_sds_io_request.h - * - * - */ - -#include "scic_sds_request.h" -#include "sci_base_state_machine.h" - /** * This method performs the actions required when entering the * SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index 6aa170e..0060804 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -53,22 +53,18 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the ready substate handlers for an STP device. - * - * - */ - -#include "intel_sat.h" #include "intel_ata.h" #include "intel_sata.h" -#include "sci_environment.h" +#include "intel_sat.h" +#include "sci_base_state.h" #include "scic_remote_device.h" -#include "scic_user_callback.h" #include "scic_sds_controller.h" #include "scic_sds_port.h" #include "scic_sds_remote_device.h" #include "scic_sds_request.h" +#include "scic_user_callback.h" +#include "sci_environment.h" +#include "sci_util.h" #include "scu_event_codes.h" /** @@ -655,70 +651,6 @@ const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_rea }; /* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "sci_base_state.h" -#include "scic_remote_device.h" -#include "scic_user_callback.h" -#include "scic_sds_controller.h" -#include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "sci_util.h" -#include "sci_environment.h" - -/* * ***************************************************************************** * * STP REMOTE DEVICE READY SUBSTATE PRIVATE METHODS * ***************************************************************************** */ -- cgit v0.10.2 From 27d42e3e794523c3cec02a17fb221ade00e98648 Mon Sep 17 00:00:00 2001 From: Henryk Dembkowski Date: Sat, 12 Feb 2011 11:50:13 -0800 Subject: isci: coding style changes for remote device Change names from upper to low letters Signed-off-by: Henryk Dembkowski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_remote_device.h b/drivers/scsi/isci/core/sci_base_remote_device.h index 25c6ddd..45414ce 100644 --- a/drivers/scsi/isci/core/sci_base_remote_device.h +++ b/drivers/scsi/isci/core/sci_base_remote_device.h @@ -153,16 +153,16 @@ struct sci_base_remote_device { }; -typedef enum sci_status (*SCI_BASE_REMOTE_DEVICE_HANDLER_T)( +typedef enum sci_status (*sci_base_remote_device_handler_t)( struct sci_base_remote_device * ); -typedef enum sci_status (*SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T)( +typedef enum sci_status (*sci_base_remote_device_request_handler_t)( struct sci_base_remote_device *, struct sci_base_request * ); -typedef enum sci_status (*SCI_BASE_REMOTE_DEVICE_HIGH_PRIORITY_REQUEST_COMPLETE_HANDLER_T)( +typedef enum sci_status (*sci_base_remote_device_high_priority_request_complete_handler_t)( struct sci_base_remote_device *, struct sci_base_request *, void *, @@ -182,68 +182,68 @@ struct sci_base_remote_device_state_handler { * The start_handler specifies the method invoked when a user attempts to * start a remote device. */ - SCI_BASE_REMOTE_DEVICE_HANDLER_T start_handler; + sci_base_remote_device_handler_t start_handler; /** * The stop_handler specifies the method invoked when a user attempts to * stop a remote device. */ - SCI_BASE_REMOTE_DEVICE_HANDLER_T stop_handler; + sci_base_remote_device_handler_t stop_handler; /** * The fail_handler specifies the method invoked when a remote device * failure has occurred. A failure may be due to an inability to * initialize/configure the device. */ - SCI_BASE_REMOTE_DEVICE_HANDLER_T fail_handler; + sci_base_remote_device_handler_t fail_handler; /** * The destruct_handler specifies the method invoked when attempting to * destruct a remote device. */ - SCI_BASE_REMOTE_DEVICE_HANDLER_T destruct_handler; + sci_base_remote_device_handler_t destruct_handler; /** * The reset handler specifies the method invloked when requesting to reset a * remote device. */ - SCI_BASE_REMOTE_DEVICE_HANDLER_T reset_handler; + sci_base_remote_device_handler_t reset_handler; /** * The reset complete handler specifies the method invloked when reporting * that a reset has completed to the remote device. */ - SCI_BASE_REMOTE_DEVICE_HANDLER_T reset_complete_handler; + sci_base_remote_device_handler_t reset_complete_handler; /** * The start_io_handler specifies the method invoked when a user * attempts to start an IO request for a remote device. */ - SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T start_io_handler; + sci_base_remote_device_request_handler_t start_io_handler; /** * The complete_io_handler specifies the method invoked when a user * attempts to complete an IO request for a remote device. */ - SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T complete_io_handler; + sci_base_remote_device_request_handler_t complete_io_handler; /** * The continue_io_handler specifies the method invoked when a user * attempts to continue an IO request for a remote device. */ - SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T continue_io_handler; + sci_base_remote_device_request_handler_t continue_io_handler; /** * The start_task_handler specifies the method invoked when a user * attempts to start a task management request for a remote device. */ - SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T start_task_handler; + sci_base_remote_device_request_handler_t start_task_handler; /** * The complete_task_handler specifies the method invoked when a user * attempts to complete a task management request for a remote device. */ - SCI_BASE_REMOTE_DEVICE_REQUEST_HANDLER_T complete_task_handler; + sci_base_remote_device_request_handler_t complete_task_handler; }; -- cgit v0.10.2 From f7d36e1872c0d79ea9e31445c3b1b70602dbac4b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 12 Feb 2011 11:50:15 -0800 Subject: isci: kill a callback cast Callbacks are already type unsafe, obfuscating things further by casting the callback routine is less safe because now function argument number changes will not be caught by the compiler. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 5fc1baa..643247f 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -583,19 +583,20 @@ void scic_sds_remote_device_start_request( * serves as a callback when RNC gets resumed during a task management * sequence. none */ -void scic_sds_remote_device_continue_request( - struct scic_sds_remote_device *this_device) +void scic_sds_remote_device_continue_request(void *dev) { + struct scic_sds_remote_device *sci_dev = dev; + struct scic_sds_request *sci_req = sci_dev->working_request; + /* we need to check if this request is still valid to continue. */ - if (this_device->working_request != NULL) { - struct scic_sds_request *this_request = this_device->working_request; - struct scic_sds_controller *scic = this_request->owning_controller; + if (sci_req) { + struct scic_sds_controller *scic = sci_req->owning_controller; u32 state = scic->parent.state_machine.current_state_id; sci_base_controller_request_handler_t continue_io; continue_io = scic_sds_controller_state_handler_table[state].base.continue_io; - continue_io(&scic->parent, &this_request->target_device->parent, - &this_request->parent); + continue_io(&scic->parent, &sci_req->target_device->parent, + &sci_req->parent); } } diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index d91570f..4841e45 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -509,8 +509,7 @@ void scic_sds_remote_device_start_request( struct scic_sds_request *the_request, enum sci_status status); -void scic_sds_remote_device_continue_request( - struct scic_sds_remote_device *this_device); +void scic_sds_remote_device_continue_request(void *sci_dev); enum sci_status scic_sds_remote_device_default_start_handler( struct sci_base_remote_device *this_device); diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index 0060804..880e0e5 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -188,7 +188,6 @@ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_h scic_sds_remote_node_context_resume( this_device->rnc, - (scics_sds_remote_node_context_callback) scic_sds_remote_device_continue_request, this_device); } -- cgit v0.10.2 From 11c88986290712fc3ae6993af85a0f9a15886278 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Feb 2011 15:01:46 -0800 Subject: isci: remove SCIC_DEBUG_ENABLED, and fixup an odd macro This will be replaced by state machine tracepoints and should have been a part of the logger removal. Ran across scic_sds_port_decrement_request_count() which is an ugly macro which silently hides accounting errors. Turn it into a WARN_ONCE to see if it ever triggers. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 01da46a..d9213e2 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -267,101 +267,6 @@ static void scic_sds_phy_sata_timeout(void *phy) ); } -/* - * ***************************************************************************** - * * SCIC SDS PHY External Methods - * ***************************************************************************** */ - -/** - * This method returns the object size for a phy object. - * - * u32 - */ - -/** - * This method returns the minimum number of timers required for a phy object. - * - * u32 - */ - -/** - * This method returns the maximum number of timers required for a phy object. - * - * u32 - */ - -#ifdef SCIC_DEBUG_ENABLED -/** - * scic_sds_phy_observe_state_change() - - * @our_observer: - * - * Debug code to record the state transitions in the phy - */ -void scic_sds_phy_observe_state_change( - struct sci_base_observer *our_observer, - struct sci_base_subject *the_subject) -{ - struct scic_sds_phy *this_phy; - struct sci_base_state_machine *the_state_machine; - - u8 transition_requestor; - u32 base_state_id; - u32 starting_substate_id; - - the_state_machine = (struct sci_base_state_machine *)the_subject; - this_phy = (struct scic_sds_phy *)the_state_machine->state_machine_owner; - - if (the_state_machine == &this_phy->parent.state_machine) { - transition_requestor = 0x01; - } else if (the_state_machine == &this_phy->starting_substate_machine) { - transition_requestor = 0x02; - } else { - transition_requestor = 0xFF; - } - - base_state_id = - sci_base_state_machine_get_state(&this_phy->parent.state_machine); - starting_substate_id = - sci_base_state_machine_get_state(&this_phy->starting_substate_machine); - - this_phy->state_record.state_transition_table[ - this_phy->state_record.index++] = ((transition_requestor << 24) - | ((u8)base_state_id << 8) - | ((u8)starting_substate_id)); - - this_phy->state_record.index = - this_phy->state_record.index & (MAX_STATE_TRANSITION_RECORD - 1); - -} -#endif /* SCIC_DEBUG_ENABLED */ - -#ifdef SCIC_DEBUG_ENABLED -/** - * scic_sds_phy_initialize_state_recording() - - * - * This method initializes the state record debug information for the phy - * object. The state machines for the phy object must be constructed before - * this function is called. - */ -void scic_sds_phy_initialize_state_recording( - struct scic_sds_phy *this_phy) -{ - this_phy->state_record.index = 0; - - sci_base_observer_initialize( - &this_phy->state_record.base_state_observer, - scic_sds_phy_observe_state_change, - &this_phy->parent.state_machine.parent - ); - - sci_base_observer_initialize( - &this_phy->state_record.starting_state_observer, - scic_sds_phy_observe_state_change, - &this_phy->starting_substate_machine.parent - ); -} -#endif /* SCIC_DEBUG_ENABLED */ - /** * This method will construct the struct scic_sds_phy object * @this_phy: @@ -400,10 +305,6 @@ void scic_sds_phy_construct( scic_sds_phy_starting_substates, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL ); - - #ifdef SCIC_DEBUG_ENABLED - scic_sds_phy_initialize_state_recording(this_phy); - #endif /* SCIC_DEBUG_ENABLED */ } /** diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index d9691b3..3b88259 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -156,25 +156,6 @@ enum SCIC_SDS_PHY_STARTING_SUBSTATES { struct scic_sds_port; struct scic_sds_controller; -#ifdef SCIC_DEBUG_ENABLED -#define MAX_STATE_TRANSITION_RECORD (256) - -/** - * - * - * Debug code to record the state transitions for the phy object - */ -struct scic_sds_phy_state_record { - struct sci_base_observer base_state_observer; - struct sci_base_observer starting_state_observer; - - u16 index; - - u32 state_transition_table[MAX_STATE_TRANSITION_RECORD]; - -}; -#endif /* SCIC_DEBUG_ENABLED */ - /** * This enumeration provides a named phy type for the state machine * @@ -271,10 +252,6 @@ struct scic_sds_phy { struct sci_base_state_machine starting_substate_machine; - #ifdef SCIC_DEBUG_ENABLED - struct scic_sds_phy_state_record state_record; - #endif /* SCIC_DEBUG_ENABLED */ - /** * This field points to the link layer register set within the SCU. */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 9749e3a..ff06f8c 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -974,19 +974,6 @@ static void scic_sds_port_timeout_handler(void *port) /* --------------------------------------------------------------------------- */ -#ifdef SCIC_DEBUG_ENABLED -void scic_sds_port_decrement_request_count(struct scic_sds_port *this_port) -{ - if (this_port->started_request_count == 0) - dev_warn(sciport_to_dev(this_port), - __func__, - "%s: SCIC Port object requested to decrement started " - "io count past zero.\n"); - else - this_port->started_request_count--; -} -#endif - /** * This function updates the hardwares VIIT entry for this port. * diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index bbb9de5..56c15fc 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -63,6 +63,7 @@ * */ +#include #include "sci_controller_constants.h" #include "intel_sas.h" #include "sci_base_port.h" @@ -286,40 +287,21 @@ extern struct scic_sds_port_state_handler scic_sds_port_ready_substate_handler_t #define scic_sds_port_get_index(this_port) \ ((this_port)->physical_port_index) -/** - * scic_sds_port_increment_request_count() - - * - * Helper macro to increment the started request count - */ -#define scic_sds_port_increment_request_count(this_port) \ - ((this_port)->started_request_count++) -#ifdef SCIC_DEBUG_ENABLED -/** - * scic_sds_port_decrement_request_count() - This method decrements the started - * io request count. The method will not decrment the started io request - * count below 0 and will log a debug message if this is attempted. - * - * - */ -void scic_sds_port_decrement_request_count( - struct scic_sds_port *this_port); -#else -/** - * scic_sds_port_decrement_request_count() - - * - * Helper macro to decrement the started io request count. The macro will not - * decrement the started io request count below 0. - */ -#define scic_sds_port_decrement_request_count(this_port) \ - (\ - (this_port)->started_request_count = (\ - ((this_port)->started_request_count == 0) ? \ - (this_port)->started_request_count : \ - ((this_port)->started_request_count - 1) \ - ) \ - ) -#endif +static inline void scic_sds_port_increment_request_count(struct scic_sds_port *sci_port) +{ + sci_port->started_request_count++; +} + +static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port) +{ + if (WARN_ONCE(sci_port->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + sci_port->started_request_count--; +} /** * scic_sds_port_write_phy_assignment() - -- cgit v0.10.2 From c7ef4031f01301298bbaba2666740183cd399f8c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 18 Feb 2011 09:25:05 -0800 Subject: isci: bypass scic_controller_get_handler_methods() The indirection is unecessary and broken in the current case that assigns the handlers based on a not up-to-date pdev->msix_enabled value. Route the handlers directly to the requisite core routines. Todo: hook up error interrupt handling Reported-by: Jeff Garzik Cc: Christoph Hellwig Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 6a32d91..cd8017f 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1898,8 +1898,7 @@ static void scic_sds_controller_single_vector_completion_handler( * * bool true if an interrupt is processed false if no interrupt was processed */ -static bool scic_sds_controller_normal_vector_interrupt_handler( - struct scic_sds_controller *scic) +bool scic_sds_controller_isr(struct scic_sds_controller *scic) { if (scic_sds_controller_completion_queue_has_entries(scic)) { return true; @@ -1925,8 +1924,7 @@ static bool scic_sds_controller_normal_vector_interrupt_handler( * This is the method provided to handle the completions for a normal MSIX * message. */ -static void scic_sds_controller_normal_vector_completion_handler( - struct scic_sds_controller *scic) +void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) { /* Empty out the completion queue */ if (scic_sds_controller_completion_queue_has_entries(scic)) @@ -2582,9 +2580,9 @@ enum sci_status scic_controller_get_handler_methods( status = SCI_SUCCESS; } else if (message_count == 2) { handler_methods[0].interrupt_handler - = scic_sds_controller_normal_vector_interrupt_handler; + = scic_sds_controller_isr; handler_methods[0].completion_handler - = scic_sds_controller_normal_vector_completion_handler; + = scic_sds_controller_completion_handler; handler_methods[1].interrupt_handler = scic_sds_controller_error_vector_interrupt_handler; diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 6f16f4d..b66e620 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -62,80 +62,49 @@ #include "request.h" #include "host.h" -/** - * isci_isr() - This function is the interrupt service routine for the - * controller. It schedules the tasklet and returns. - * @vec: This parameter specifies the interrupt vector. - * @data: This parameter specifies the ISCI host object. - * - * IRQ_HANDLED if out interrupt otherwise, IRQ_NONE - */ -irqreturn_t isci_isr(int vec, void *data) +irqreturn_t isci_msix_isr(int vec, void *data) { - struct isci_host *isci_host - = (struct isci_host *)data; - struct scic_controller_handler_methods *handlers - = &isci_host->scic_irq_handlers[SCI_MSIX_NORMAL_VECTOR]; - irqreturn_t ret = IRQ_NONE; - - if (isci_host_get_state(isci_host) != isci_starting - && handlers->interrupt_handler) { - - if (handlers->interrupt_handler(isci_host->core_controller)) { - if (isci_host_get_state(isci_host) != isci_stopped) { - tasklet_schedule( - &isci_host->completion_tasklet); - } else - dev_dbg(&isci_host->pdev->dev, - "%s: controller stopped\n", - __func__); - ret = IRQ_HANDLED; + struct isci_host *ihost = data; + struct scic_sds_controller *scic = ihost->core_controller; + + if (isci_host_get_state(ihost) != isci_starting) { + if (scic_sds_controller_isr(scic)) { + if (isci_host_get_state(ihost) != isci_stopped) + tasklet_schedule(&ihost->completion_tasklet); + else + dev_dbg(&ihost->pdev->dev, + "%s: controller stopped\n", __func__); } - } else - dev_warn(&isci_host->pdev->dev, - "%s: get_handler_methods failed, " - "isci_host->status = 0x%x\n", - __func__, - isci_host_get_state(isci_host)); + } - return ret; + return IRQ_HANDLED; } -irqreturn_t isci_legacy_isr(int vec, void *data) +irqreturn_t isci_intx_isr(int vec, void *data) { struct pci_dev *pdev = data; - struct isci_host *isci_host; - struct scic_controller_handler_methods *handlers; + struct isci_host *ihost; irqreturn_t ret = IRQ_NONE; - /* - * Since this is a legacy interrupt, either or both - * controllers could have triggered it. Thus, we have to call - * the legacy interrupt handler for all controllers on the - * PCI function. - */ - for_each_isci_host(isci_host, pdev) { - handlers = &isci_host->scic_irq_handlers[SCI_MSIX_NORMAL_VECTOR]; - - if (isci_host_get_state(isci_host) != isci_starting - && handlers->interrupt_handler) { - - if (handlers->interrupt_handler(isci_host->core_controller)) { - if (isci_host_get_state(isci_host) != isci_stopped) { - tasklet_schedule( - &isci_host->completion_tasklet); - } else - dev_dbg(&isci_host->pdev->dev, + for_each_isci_host(ihost, pdev) { + struct scic_sds_controller *scic = ihost->core_controller; + + if (isci_host_get_state(ihost) != isci_starting) { + if (scic_sds_controller_isr(scic)) { + if (isci_host_get_state(ihost) != isci_stopped) + tasklet_schedule(&ihost->completion_tasklet); + else + dev_dbg(&ihost->pdev->dev, "%s: controller stopped\n", __func__); ret = IRQ_HANDLED; } } else - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: get_handler_methods failed, " - "isci_host->status = 0x%x\n", + "ihost->status = 0x%x\n", __func__, - isci_host_get_state(isci_host)); + isci_host_get_state(ihost)); } return ret; } @@ -166,34 +135,9 @@ void isci_host_start_complete( } - - -/** - * isci_host_scan_finished() - This function is one of the SCSI Host Template - * functions. The SCSI midlayer calls this function during a target scan, - * approx. once every 10 millisecs. - * @shost: This parameter specifies the SCSI host being scanned - * @time: This parameter specifies the number of ticks since the scan started. - * - * scan status, zero indicates the SCSI midlayer should continue to poll, - * otherwise assume controller is ready. - */ -int isci_host_scan_finished( - struct Scsi_Host *shost, - unsigned long time) +int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) { - struct isci_host *isci_host - = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); - - struct scic_controller_handler_methods *handlers - = &isci_host->scic_irq_handlers[SCI_MSIX_NORMAL_VECTOR]; - - if (handlers->interrupt_handler == NULL) { - dev_err(&isci_host->pdev->dev, - "%s: scic_controller_get_handler_methods failed\n", - __func__); - return 1; - } + struct isci_host *isci_host = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); /** * check interrupt_handler's status and call completion_handler if true, @@ -204,8 +148,8 @@ int isci_host_scan_finished( * continue to return zero from thee scan_finished routine until * the scic_cb_controller_start_complete() call comes from the core. **/ - if (handlers->interrupt_handler(isci_host->core_controller)) - handlers->completion_handler(isci_host->core_controller); + if (scic_sds_controller_isr(isci_host->core_controller)) + scic_sds_controller_completion_handler(isci_host->core_controller); if (isci_starting == isci_host_get_state(isci_host) && time < (HZ * 10)) { @@ -363,8 +307,6 @@ static int isci_host_mdl_allocate_coherent( static void isci_host_completion_routine(unsigned long data) { struct isci_host *isci_host = (struct isci_host *)data; - struct scic_controller_handler_methods *handlers - = &isci_host->scic_irq_handlers[SCI_MSIX_NORMAL_VECTOR]; struct list_head completed_request_list; struct list_head aborted_request_list; struct list_head *current_position; @@ -378,11 +320,8 @@ static void isci_host_completion_routine(unsigned long data) spin_lock_irq(&isci_host->scic_lock); - if (handlers->completion_handler) { - handlers->completion_handler( - isci_host->core_controller - ); - } + scic_sds_controller_completion_handler(isci_host->core_controller); + /* Take the lists of completed I/Os from the host. */ list_splice_init(&isci_host->requests_to_complete, &completed_request_list); @@ -544,8 +483,6 @@ int isci_host_init(struct isci_host *isci_host) enum sci_status status; struct scic_sds_controller *controller; struct scic_sds_port *scic_port; - struct scic_controller_handler_methods *handlers - = &isci_host->scic_irq_handlers[0]; union scic_oem_parameters scic_oem_params; union scic_user_parameters scic_user_params; const struct firmware *fw = NULL; @@ -691,35 +628,8 @@ int isci_host_init(struct isci_host *isci_host) goto out; } - /* @todo: use both MSI-X interrupts, and don't do indirect - * calls to the handlers just register direct calls - */ - if (isci_host->pdev->msix_enabled) { - status = scic_controller_get_handler_methods( - SCIC_MSIX_INTERRUPT_TYPE, - SCI_MSIX_DOUBLE_VECTOR, - handlers - ); - } else { - status = scic_controller_get_handler_methods( - SCIC_LEGACY_LINE_INTERRUPT_TYPE, - 0, - handlers - ); - } - - if (status != SCI_SUCCESS) { - handlers->interrupt_handler = NULL; - handlers->completion_handler = NULL; - dev_err(&isci_host->pdev->dev, - "%s: scic_controller_get_handler_methods failed\n", - __func__); - } - tasklet_init(&isci_host->completion_tasklet, - isci_host_completion_routine, - (unsigned long)isci_host - ); + isci_host_completion_routine, (unsigned long)isci_host); INIT_LIST_HEAD(&(isci_host->mdl_struct_list)); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 4f4b99d..421d3de 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -53,13 +53,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the isci_module initialization routines. - * - * host.h - */ - - #if !defined(_SCI_HOST_H_) #define _SCI_HOST_H_ @@ -79,10 +72,6 @@ #define SCI_SCU_BAR_SIZE (4*1024*1024) #define SCI_IO_SPACE_BAR0 2 #define SCI_IO_SPACE_BAR1 3 -#define SCI_MSIX_NORMAL_VECTOR 0 -#define SCI_MSIX_ERROR_VECTOR 1 -#define SCI_MSIX_SINGLE_VECTOR 1 -#define SCI_MSIX_DOUBLE_VECTOR 2 #define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ #define SCIC_CONTROLLER_STOP_TIMEOUT 5000 @@ -96,7 +85,6 @@ struct coherent_memory_info { struct isci_host { struct scic_sds_controller *core_controller; - struct scic_controller_handler_methods scic_irq_handlers[SCI_NUM_MSI_X_INT]; union scic_oem_parameters oem_parameters; int id; /* unique within a given pci device */ diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index e3d9b15..f2bd92b 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -334,7 +334,7 @@ static int isci_setup_interrupts(struct pci_dev *pdev) BUG_ON(!isci_host); /* @todo: need to handle error case. */ - err = devm_request_irq(&pdev->dev, msix->vector, isci_isr, 0, + err = devm_request_irq(&pdev->dev, msix->vector, isci_msix_isr, 0, DRV_NAME"-msix", isci_host); if (!err) continue; @@ -353,7 +353,7 @@ static int isci_setup_interrupts(struct pci_dev *pdev) return 0; intx: - err = devm_request_irq(&pdev->dev, pdev->irq, isci_legacy_isr, + err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr, IRQF_SHARED, DRV_NAME"-intx", pdev); return err; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 6aee3c9..3dc0f6c 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -113,8 +113,11 @@ struct isci_firmware { u8 sas_addrs_size; }; -irqreturn_t isci_isr(int vec, void *data); -irqreturn_t isci_legacy_isr(int vec, void *data); +irqreturn_t isci_msix_isr(int vec, void *data); +irqreturn_t isci_intx_isr(int vec, void *data); + +bool scic_sds_controller_isr(struct scic_sds_controller *scic); +void scic_sds_controller_completion_handler(struct scic_sds_controller *scic); enum sci_status isci_parse_oem_parameters( union scic_oem_parameters *oem_params, -- cgit v0.10.2 From 0cf89d1d27c1bdd0abf1714096f98ea44704dcff Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 18 Feb 2011 09:25:07 -0800 Subject: isci: cleanup "starting" state handling The lldd actively disallows requests in the "starting" state. Retrying or holding off commands in this state is sub-optimal: 1/ it adds another state check to the fast path 2/ retrying can cause libsas to give up However, isci's ->lldd_dev_found() routine already waits for controller start to complete before allowing further progress. Checking the "starting" state in isci_task_execute_task and the isr is redundant and misleading. Clean this up and introduce a controller-wide event queue to start reeling in "completion" proliferation in the driver. The "stopping" state cleanups are in a similar vein, rely on the the isr and other paths being precluded from occurring rather than implementing state checking logic. Reported-by: Christoph Hellwig Cc: Jeff Garzik Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index b66e620..dbdc3ba 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -67,15 +67,8 @@ irqreturn_t isci_msix_isr(int vec, void *data) struct isci_host *ihost = data; struct scic_sds_controller *scic = ihost->core_controller; - if (isci_host_get_state(ihost) != isci_starting) { - if (scic_sds_controller_isr(scic)) { - if (isci_host_get_state(ihost) != isci_stopped) - tasklet_schedule(&ihost->completion_tasklet); - else - dev_dbg(&ihost->pdev->dev, - "%s: controller stopped\n", __func__); - } - } + if (scic_sds_controller_isr(scic)) + tasklet_schedule(&ihost->completion_tasklet); return IRQ_HANDLED; } @@ -89,22 +82,10 @@ irqreturn_t isci_intx_isr(int vec, void *data) for_each_isci_host(ihost, pdev) { struct scic_sds_controller *scic = ihost->core_controller; - if (isci_host_get_state(ihost) != isci_starting) { - if (scic_sds_controller_isr(scic)) { - if (isci_host_get_state(ihost) != isci_stopped) - tasklet_schedule(&ihost->completion_tasklet); - else - dev_dbg(&ihost->pdev->dev, - "%s: controller stopped\n", - __func__); - ret = IRQ_HANDLED; - } - } else - dev_warn(&ihost->pdev->dev, - "%s: get_handler_methods failed, " - "ihost->status = 0x%x\n", - __func__, - isci_host_get_state(ihost)); + if (scic_sds_controller_isr(scic)) { + tasklet_schedule(&ihost->completion_tasklet); + ret = IRQ_HANDLED; + } } return ret; } @@ -118,26 +99,19 @@ irqreturn_t isci_intx_isr(int vec, void *data) * core library. * */ -void isci_host_start_complete( - struct isci_host *isci_host, - enum sci_status completion_status) +void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status) { - if (completion_status == SCI_SUCCESS) { - dev_dbg(&isci_host->pdev->dev, - "%s: completion_status: SCI_SUCCESS\n", __func__); - isci_host_change_state(isci_host, isci_ready); - complete_all(&isci_host->start_complete); - } else - dev_err(&isci_host->pdev->dev, - "controller start failed with " - "completion_status = 0x%x;", - completion_status); - + if (completion_status != SCI_SUCCESS) + dev_info(&ihost->pdev->dev, + "controller start timed out, continuing...\n"); + isci_host_change_state(ihost, isci_ready); + clear_bit(IHOST_START_PENDING, &ihost->flags); + wake_up(&ihost->eventq); } int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) { - struct isci_host *isci_host = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); + struct isci_host *ihost = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); /** * check interrupt_handler's status and call completion_handler if true, @@ -148,61 +122,44 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) * continue to return zero from thee scan_finished routine until * the scic_cb_controller_start_complete() call comes from the core. **/ - if (scic_sds_controller_isr(isci_host->core_controller)) - scic_sds_controller_completion_handler(isci_host->core_controller); + if (scic_sds_controller_isr(ihost->core_controller)) + scic_sds_controller_completion_handler(ihost->core_controller); - if (isci_starting == isci_host_get_state(isci_host) - && time < (HZ * 10)) { - dev_dbg(&isci_host->pdev->dev, - "%s: isci_host->status = %d, time = %ld\n", - __func__, isci_host_get_state(isci_host), time); + if (test_bit(IHOST_START_PENDING, &ihost->flags) && time < HZ*10) { + dev_dbg(&ihost->pdev->dev, + "%s: ihost->status = %d, time = %ld\n", + __func__, isci_host_get_state(ihost), time); return 0; } - dev_dbg(&isci_host->pdev->dev, - "%s: isci_host->status = %d, time = %ld\n", - __func__, isci_host_get_state(isci_host), time); + dev_dbg(&ihost->pdev->dev, + "%s: ihost->status = %d, time = %ld\n", + __func__, isci_host_get_state(ihost), time); - scic_controller_enable_interrupts(isci_host->core_controller); + scic_controller_enable_interrupts(ihost->core_controller); return 1; } - -/** - * isci_host_scan_start() - This function is one of the SCSI Host Template - * function, called by the SCSI mid layer berfore a target scan begins. The - * core library controller start routine is called from here. - * @shost: This parameter specifies the SCSI host to be scanned - * - */ void isci_host_scan_start(struct Scsi_Host *shost) { - struct isci_host *isci_host; - - isci_host = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); - isci_host_change_state(isci_host, isci_starting); + struct isci_host *ihost = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); + struct scic_sds_controller *scic = ihost->core_controller; + unsigned long tmo = scic_controller_get_suggested_start_timeout(scic); - scic_controller_disable_interrupts(isci_host->core_controller); - init_completion(&isci_host->start_complete); - scic_controller_start( - isci_host->core_controller, - scic_controller_get_suggested_start_timeout( - isci_host->core_controller) - ); + set_bit(IHOST_START_PENDING, &ihost->flags); + scic_controller_disable_interrupts(ihost->core_controller); + scic_controller_start(scic, tmo); } -void isci_host_stop_complete( - struct isci_host *isci_host, - enum sci_status completion_status) +void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) { - isci_host_change_state(isci_host, isci_stopped); - scic_controller_disable_interrupts( - isci_host->core_controller - ); - complete(&isci_host->stop_complete); + isci_host_change_state(ihost, isci_stopped); + scic_controller_disable_interrupts(ihost->core_controller); + clear_bit(IHOST_STOP_PENDING, &ihost->flags); + wake_up(&ihost->eventq); } static struct coherent_memory_info *isci_host_alloc_mdl_struct( @@ -370,31 +327,26 @@ static void isci_host_completion_routine(unsigned long data) } -void isci_host_deinit( - struct isci_host *isci_host) +void isci_host_deinit(struct isci_host *ihost) { + struct scic_sds_controller *scic = ihost->core_controller; int i; - isci_host_change_state(isci_host, isci_stopping); + isci_host_change_state(ihost, isci_stopping); for (i = 0; i < SCI_MAX_PORTS; i++) { - struct isci_port *port = &isci_host->isci_ports[i]; - struct isci_remote_device *device, *tmpdev; - list_for_each_entry_safe(device, tmpdev, - &port->remote_dev_list, node) { - isci_remote_device_change_state(device, isci_stopping); - isci_remote_device_stop(device); + struct isci_port *port = &ihost->isci_ports[i]; + struct isci_remote_device *idev, *d; + + list_for_each_entry_safe(idev, d, &port->remote_dev_list, node) { + isci_remote_device_change_state(idev, isci_stopping); + isci_remote_device_stop(idev); } } - /* stop the comtroller and wait for completion. */ - init_completion(&isci_host->stop_complete); - scic_controller_stop( - isci_host->core_controller, - SCIC_CONTROLLER_STOP_TIMEOUT - ); - wait_for_completion(&isci_host->stop_complete); - /* next, reset the controller. */ - scic_controller_reset(isci_host->core_controller); + set_bit(IHOST_STOP_PENDING, &ihost->flags); + scic_controller_stop(scic, SCIC_CONTROLLER_STOP_TIMEOUT); + wait_for_stop(ihost); + scic_controller_reset(scic); } static int isci_verify_firmware(const struct firmware *fw, @@ -506,6 +458,7 @@ int isci_host_init(struct isci_host *isci_host) spin_lock_init(&isci_host->state_lock); spin_lock_init(&isci_host->scic_lock); spin_lock_init(&isci_host->queue_lock); + init_waitqueue_head(&isci_host->eventq); isci_host_change_state(isci_host, isci_starting); isci_host->can_queue = ISCI_CAN_QUEUE_VAL; diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 421d3de..26768c5 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -109,13 +109,15 @@ struct isci_host { u8 sas_addr[SAS_ADDR_SIZE]; enum isci_status status; + #define IHOST_START_PENDING 0 + #define IHOST_STOP_PENDING 1 + unsigned long flags; + wait_queue_head_t eventq; struct Scsi_Host *shost; struct tasklet_struct completion_tasklet; struct list_head mdl_struct_list; struct list_head requests_to_complete; struct list_head requests_to_abort; - struct completion stop_complete; - struct completion start_complete; spinlock_t scic_lock; struct isci_host *next; }; @@ -202,6 +204,17 @@ static inline void isci_host_can_dequeue( spin_unlock_irqrestore(&isci_host->queue_lock, flags); } +static inline void wait_for_start(struct isci_host *ihost) +{ + wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags)); +} + +static inline void wait_for_stop(struct isci_host *ihost) +{ + wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags)); +} + + /** * isci_host_from_sas_ha() - This accessor retrieves the isci_host object * reference from the Linux sas_ha_struct reference. diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index dbf3c82..936f229 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -507,6 +507,8 @@ int isci_remote_device_found(struct domain_device *domain_dev) dev_dbg(&isci_host->pdev->dev, "%s: domain_device = %p\n", __func__, domain_dev); + wait_for_start(isci_host); + sas_port = domain_dev->port; sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy, port_phy_el); @@ -560,8 +562,6 @@ int isci_remote_device_found(struct domain_device *domain_dev) return -ENODEV; } - wait_for_completion(&isci_host->start_complete); - return 0; } /** diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 5e6f558..6f98f6c 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -164,8 +164,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) * for the quiesce spinlock. */ - if (isci_host_get_state(isci_host) == isci_starting || - (device && ((isci_remote_device_get_state(device) == isci_ready) || + if ((device && ((isci_remote_device_get_state(device) == isci_ready) || (isci_remote_device_get_state(device) == isci_host_quiesce)))) { /* Forces a retry from scsi mid layer. */ -- cgit v0.10.2 From 77950f51f5299c1b4f4fa4a19974128da720d199 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Fri, 18 Feb 2011 09:25:09 -0800 Subject: isci: enable interrupts during controller start, and flush discovery Polling the event queue during scan is an unneeded holdover from the original driver. Signed-off-by: Edmund Nadolski [djbw: ensure we flush all port events and domain discovery] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index dbdc3ba..7f351a3 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -113,32 +113,18 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) { struct isci_host *ihost = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); - /** - * check interrupt_handler's status and call completion_handler if true, - * link_up events should be coming from the scu core lib, as phy's come - * online. for each link_up from the core, call - * get_received_identify_address_frame, copy the frame into the - * sas_phy object and call libsas notify_port_event(PORTE_BYTES_DMAED). - * continue to return zero from thee scan_finished routine until - * the scic_cb_controller_start_complete() call comes from the core. - **/ - if (scic_sds_controller_isr(ihost->core_controller)) - scic_sds_controller_completion_handler(ihost->core_controller); - - if (test_bit(IHOST_START_PENDING, &ihost->flags) && time < HZ*10) { - dev_dbg(&ihost->pdev->dev, - "%s: ihost->status = %d, time = %ld\n", - __func__, isci_host_get_state(ihost), time); + if (test_bit(IHOST_START_PENDING, &ihost->flags)) return 0; - } + /* todo: use sas_flush_discovery once it is upstream */ + scsi_flush_work(shost); + + scsi_flush_work(shost); dev_dbg(&ihost->pdev->dev, "%s: ihost->status = %d, time = %ld\n", __func__, isci_host_get_state(ihost), time); - scic_controller_enable_interrupts(ihost->core_controller); - return 1; } @@ -150,8 +136,11 @@ void isci_host_scan_start(struct Scsi_Host *shost) unsigned long tmo = scic_controller_get_suggested_start_timeout(scic); set_bit(IHOST_START_PENDING, &ihost->flags); - scic_controller_disable_interrupts(ihost->core_controller); + + spin_lock_irq(&ihost->scic_lock); scic_controller_start(scic, tmo); + scic_controller_enable_interrupts(scic); + spin_unlock_irq(&ihost->scic_lock); } void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) -- cgit v0.10.2 From 92f4f0f544a6a75979bace0c43fee9c4fb95830c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 18 Feb 2011 09:25:11 -0800 Subject: isci: implement error isr Add basic support for handling/reporting error interrupts. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index cd8017f..7ea3662 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1937,18 +1937,12 @@ void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) SMU_IMR_WRITE(scic, 0x00000000); } -/** - * This is the method provided to handle the error MSIX message interrupt. - * This is the normal operating mode for the hardware if MSIX is enabled. - * - * bool true if an interrupt is processed false if no interrupt was processed - */ -static bool scic_sds_controller_error_vector_interrupt_handler( - struct scic_sds_controller *scic) +bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) { u32 interrupt_status; interrupt_status = SMU_ISR_READ(scic); + interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); if (interrupt_status != 0) { @@ -1970,12 +1964,7 @@ static bool scic_sds_controller_error_vector_interrupt_handler( return false; } -/** - * This is the method provided to handle the error completions when the - * hardware is using two MSIX messages. - */ -static void scic_sds_controller_error_vector_completion_handler( - struct scic_sds_controller *scic) +void scic_sds_controller_error_handler(struct scic_sds_controller *scic) { u32 interrupt_status; @@ -1988,10 +1977,7 @@ static void scic_sds_controller_error_vector_completion_handler( SMU_ISR_WRITE(scic, SMU_ISR_QUEUE_SUSPEND); } else { - dev_err(scic_to_dev(scic), - "%s: SCIC Controller reports CRC error on completion " - "ISR %x\n", - __func__, + dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, interrupt_status); sci_base_state_machine_change_state( @@ -2585,9 +2571,9 @@ enum sci_status scic_controller_get_handler_methods( = scic_sds_controller_completion_handler; handler_methods[1].interrupt_handler - = scic_sds_controller_error_vector_interrupt_handler; + = scic_sds_controller_error_isr; handler_methods[1].completion_handler - = scic_sds_controller_error_vector_completion_handler; + = scic_sds_controller_error_handler; status = SCI_SUCCESS; } diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 7f351a3..cb2e3f9 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -85,11 +85,27 @@ irqreturn_t isci_intx_isr(int vec, void *data) if (scic_sds_controller_isr(scic)) { tasklet_schedule(&ihost->completion_tasklet); ret = IRQ_HANDLED; + } else if (scic_sds_controller_error_isr(scic)) { + spin_lock(&ihost->scic_lock); + scic_sds_controller_error_handler(scic); + spin_unlock(&ihost->scic_lock); + ret = IRQ_HANDLED; } } + return ret; } +irqreturn_t isci_error_isr(int vec, void *data) +{ + struct isci_host *ihost = data; + struct scic_sds_controller *scic = ihost->core_controller; + + if (scic_sds_controller_error_isr(scic)) + scic_sds_controller_error_handler(scic); + + return IRQ_HANDLED; +} /** * isci_host_start_complete() - This function is called by the core library, diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index f2bd92b..4d6decb 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -330,11 +330,17 @@ static int isci_setup_interrupts(struct pci_dev *pdev) int id = i / SCI_NUM_MSI_X_INT; struct msix_entry *msix = &pci_info->msix_entries[i]; struct isci_host *isci_host = isci_host_by_id(pdev, id); + irq_handler_t isr; + + /* odd numbered vectors are error interrupts */ + if (i & 1) + isr = isci_error_isr; + else + isr = isci_msix_isr; BUG_ON(!isci_host); - /* @todo: need to handle error case. */ - err = devm_request_irq(&pdev->dev, msix->vector, isci_msix_isr, 0, + err = devm_request_irq(&pdev->dev, msix->vector, isr, 0, DRV_NAME"-msix", isci_host); if (!err) continue; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 3dc0f6c..39efd5f 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -115,9 +115,12 @@ struct isci_firmware { irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); +irqreturn_t isci_error_isr(int vec, void *data); bool scic_sds_controller_isr(struct scic_sds_controller *scic); void scic_sds_controller_completion_handler(struct scic_sds_controller *scic); +bool scic_sds_controller_error_isr(struct scic_sds_controller *scic); +void scic_sds_controller_error_handler(struct scic_sds_controller *scic); enum sci_status isci_parse_oem_parameters( union scic_oem_parameters *oem_params, -- cgit v0.10.2 From 83e514301ec73b16fb258618c9f9b443cca3744a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 18 Feb 2011 09:25:13 -0800 Subject: isci: advertise linkrate Inform libsas of the linkrate of direct attached links. Reported-by: Haavard Skinnemoen Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 13f8a30..bf0d3be 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -72,6 +72,9 @@ struct scic_sds_phy; struct scic_sds_port; + +enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy); + /** * struct scic_phy_properties - This structure defines the properties common to * all phys that can be retrieved. diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index d9213e2..743e5a6 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -73,6 +73,11 @@ /* Maximum arbitration wait time in micro-seconds */ #define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) +enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) +{ + return sci_phy->max_negotiated_speed; +} + /* * ***************************************************************************** * * SCIC SDS PHY Internal Methods diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 2343f65..446da20 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -263,6 +263,8 @@ void isci_port_link_up( success = false; } + isci_phy->sas_phy.phy->negotiated_linkrate = sci_phy_linkrate(phy); + spin_unlock_irqrestore(&isci_phy->sas_phy.frame_rcvd_lock, flags); /* Notify libsas that we have an address frame, if indeed -- cgit v0.10.2 From 83f5eeef59581faed6f002432bafe24da8cbf401 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 18 Feb 2011 09:25:15 -0800 Subject: isci: debug fixes Some of the chain walks to get back to our dev are invalid. isci_remote_device_change_state: delete rather than adding conditional deref chain walking isci_request_change_state: fix, it was being called too early isci_request_ssp_io_request_get_lun: fix compile breakage hidden by ifdef DEBUG Signed-off-by: Maciej Trela Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 936f229..dec9033 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -686,12 +686,6 @@ void isci_remote_device_change_state( { unsigned long flags; - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, - "%s: isci_device = %p, state = 0x%x", - __func__, - isci_device, - status); - spin_lock_irqsave(&isci_device->state_lock, flags); isci_device->status = status; spin_unlock_irqrestore(&isci_device->state_lock, flags); diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index f7ba047..81a7733 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -285,7 +285,6 @@ static int isci_request_alloc_core( /* initialize the request object. */ spin_lock_init(&request->state_lock); - isci_request_change_state(request, allocated); request->sci_request_mem_ptr = ((u8 *)request) + sizeof(struct isci_request); request->request_daddr = handle; @@ -302,6 +301,7 @@ static int isci_request_alloc_core( INIT_LIST_HEAD(&request->dev_node); *isci_request = request; + isci_request_change_state(request, allocated); return ret; } @@ -1389,8 +1389,8 @@ u32 isci_request_ssp_io_request_get_lun( for (i = 0; i < 8; i++) dev_dbg(&request->isci_host->pdev->dev, - "%s: request->task->ssp_task.LUN[%d] = %x\n", - __func__, i, request->task->ssp_task.LUN[i]); + "%s: task->ssp_task.LUN[%d] = %x\n", + __func__, i, task->ssp_task.LUN[i]); #endif -- cgit v0.10.2 From 5d147e73836723b81fd72b078e78887598999d5a Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Fri, 18 Feb 2011 09:25:17 -0800 Subject: isci: remove scic_controller_get_handler_methods and ilk This removes scic_controller_get_handler_methods and its associated unused code. Signed-off-by: Edmund Nadolski [djbw: kill off the legacy handler, now that we have basic error isr support] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h index 1d459d6..481e0de 100644 --- a/drivers/scsi/isci/core/scic_controller.h +++ b/drivers/scsi/isci/core/scic_controller.h @@ -81,62 +81,6 @@ enum sci_controller_mode { /** - * enum _SCIC_INTERRUPT_TYPE - This enumeration depicts the various types of - * interrupts that are potentially supported by a SCI Core implementation. - * - * - */ -enum scic_interrupt_type { - SCIC_LEGACY_LINE_INTERRUPT_TYPE, - SCIC_MSIX_INTERRUPT_TYPE, - - /** - * This enumeration value indicates the use of polling. - */ - SCIC_NO_INTERRUPTS - -}; - -/** - * This method is called by the SCI user in order to have the SCI - * implementation handle the interrupt. This method performs minimal - * processing to allow for streamlined interrupt time usage. - * - * SCIC_CONTROLLER_INTERRUPT_HANDLER true: returned if there is an interrupt to - * process and it was processed. false: returned if no interrupt was processed. - */ -typedef bool (*SCIC_CONTROLLER_INTERRUPT_HANDLER)( - struct scic_sds_controller *controller - ); - -/** - * This method is called by the SCI user to process completions generated as a - * result of a previously handled interrupt. This method will result in the - * completion of IO requests and handling of other controller generated - * events. This method should be called some time after the interrupt - * handler. - * - * Most, if not all, of the user callback APIs are invoked from within this - * API. As a result, the user should be cognizent of the operating level at - * which they invoke this API. - */ -typedef void (*SCIC_CONTROLLER_COMPLETION_HANDLER)( - struct scic_sds_controller *controller - ); - -/** - * struct scic_controller_handler_methods - This structure contains an - * interrupt handler and completion handler function pointers. - * - * - */ -struct scic_controller_handler_methods { - SCIC_CONTROLLER_INTERRUPT_HANDLER interrupt_handler; - SCIC_CONTROLLER_COMPLETION_HANDLER completion_handler; - -}; - -/** * scic_controller_construct() - This method will attempt to construct a * controller object utilizing the supplied parameter information. * @c: This parameter specifies the controller to be constructed. @@ -176,47 +120,6 @@ void scic_controller_enable_interrupts( void scic_controller_disable_interrupts( struct scic_sds_controller *controller); -/** - * scic_controller_get_handler_methods() - This method will return provide - * function pointers for the interrupt handler and completion handler. The - * interrupt handler is expected to be invoked at interrupt time. The - * completion handler is scheduled to run as a result of the interrupt - * handler. The completion handler performs the bulk work for processing - * silicon events. - * @interrupt_type: This parameter informs the core which type of - * interrupt/completion methods are being requested. These are the types: - * SCIC_LEGACY_LINE_INTERRUPT_TYPE, SCIC_MSIX_INTERRUPT_TYPE, - * SCIC_NO_INTERRUPTS (POLLING) - * @message_count: This parameter informs the core the number of MSI-X messages - * to be utilized. This parameter must be 0 when requesting legacy line - * based handlers. - * @handler_methods: The caller provides a pointer to a buffer of type - * struct scic_controller_handler_methods. The size depends on the combination of - * the interrupt_type and message_count input parameters: - * SCIC_LEGACY_LINE_INTERRUPT_TYPE: - size = - * sizeof(struct scic_controller_handler_methods) SCIC_MSIX_INTERRUPT_TYPE: - * sizeof(struct scic_controller_handler_methods) - * @handler_methods: SCIC fills out the caller's buffer with the appropriate - * interrupt and completion handlers based on the info provided in the - * interrupt_type and message_count input parameters. For - * SCIC_LEGACY_LINE_INTERRUPT_TYPE, the buffer receives a single - * struct scic_controller_handler_methods element regardless that the - * message_count parameter is zero. For SCIC_MSIX_INTERRUPT_TYPE, the buffer - * receives an array of elements of type struct scic_controller_handler_methods - * where the array size is equivalent to the message_count parameter. The - * array is zero-relative where entry zero corresponds to message-vector - * zero, entry one corresponds to message-vector one, and so forth. - * - * Indicate if the handler retrieval operation was successful. SCI_SUCCESS This - * value is returned if retrieval succeeded. - * SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT This value is returned if the user - * supplied an unsupported number of MSI-X messages. For legacy line interrupts - * the only valid value is 0. - */ -enum sci_status scic_controller_get_handler_methods( - enum scic_interrupt_type interrupt_type, - u16 message_count, - struct scic_controller_handler_methods *handler_methods); /** * scic_controller_initialize() - This method will initialize the controller diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 7ea3662..53861cc 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1564,340 +1564,6 @@ static void scic_sds_controller_process_completions( } -/** - * This method is a private routine for processing the completion queue entries. - * @this_controller: - * - */ -static void scic_sds_controller_transitioned_process_completions( - struct scic_sds_controller *this_controller) -{ - u32 completion_count = 0; - u32 completion_entry; - u32 get_index; - u32 get_cycle; - u32 event_index; - u32 event_cycle; - - dev_dbg(scic_to_dev(this_controller), - "%s: completion queue begining get:0x%08x\n", - __func__, - this_controller->completion_queue_get); - - /* Get the component parts of the completion queue */ - get_index = NORMALIZE_GET_POINTER(this_controller->completion_queue_get); - get_cycle = SMU_CQGR_CYCLE_BIT & this_controller->completion_queue_get; - - event_index = NORMALIZE_EVENT_POINTER(this_controller->completion_queue_get); - event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & this_controller->completion_queue_get; - - while ( - NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) - == COMPLETION_QUEUE_CYCLE_BIT( - this_controller->completion_queue[get_index]) - ) { - completion_count++; - - completion_entry = this_controller->completion_queue[get_index]; - INCREMENT_COMPLETION_QUEUE_GET(this_controller, get_index, get_cycle); - - dev_dbg(scic_to_dev(this_controller), - "%s: completion queue entry:0x%08x\n", - __func__, - completion_entry); - - switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { - case SCU_COMPLETION_TYPE_TASK: - scic_sds_controller_task_completion(this_controller, completion_entry); - break; - - case SCU_COMPLETION_TYPE_NOTIFY: - case SCU_COMPLETION_TYPE_EVENT: - /* - * Presently we do the same thing with a notify event that we - * do with the other event codes. */ - INCREMENT_EVENT_QUEUE_GET(this_controller, event_index, event_cycle); - /* Fall-through */ - - case SCU_COMPLETION_TYPE_SDMA: - case SCU_COMPLETION_TYPE_UFI: - default: - dev_warn(scic_to_dev(this_controller), - "%s: SCIC Controller ignoring completion type " - "%x\n", - __func__, - completion_entry); - break; - } - } - - /* Update the get register if we completed one or more entries */ - if (completion_count > 0) { - this_controller->completion_queue_get = - SMU_CQGR_GEN_BIT(ENABLE) - | SMU_CQGR_GEN_BIT(EVENT_ENABLE) - | event_cycle | SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) - | get_cycle | SMU_CQGR_GEN_VAL(POINTER, get_index); - - SMU_CQGR_WRITE(this_controller, this_controller->completion_queue_get); - } - - dev_dbg(scic_to_dev(this_controller), - "%s: completion queue ending get:0x%08x\n", - __func__, - this_controller->completion_queue_get); -} - -/* - * ****************************************************************************- - * * SCIC SDS Controller Interrupt and Completion functions - * ****************************************************************************- */ - -/** - * This method provides standard (common) processing of interrupts for polling - * and legacy based interrupts. - * @controller: - * @interrupt_status: - * - * This method returns a boolean (bool) indication as to whether an completions - * are pending to be processed. true if an interrupt is to be processed false - * if no interrupt was pending - */ -static bool scic_sds_controller_standard_interrupt_handler( - struct scic_sds_controller *this_controller, - u32 interrupt_status) -{ - bool is_completion_needed = false; - - if ((interrupt_status & SMU_ISR_QUEUE_ERROR) || - ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && - (!scic_sds_controller_completion_queue_has_entries( - this_controller)))) { - /* - * We have a fatal error on the read of the completion queue bar - * OR - * We have a fatal error there is nothing in the completion queue - * but we have a report from the hardware that the queue is full - * / @todo how do we request the a controller reset */ - is_completion_needed = true; - this_controller->encountered_fatal_error = true; - } - - if (scic_sds_controller_completion_queue_has_entries(this_controller)) { - is_completion_needed = true; - } - - return is_completion_needed; -} - -/** - * This is the method provided to handle polling for interrupts for the - * controller object. - * - * bool true if an interrupt is to be processed false if no interrupt was - * pending - */ -static bool scic_sds_controller_polling_interrupt_handler( - struct scic_sds_controller *scic) -{ - u32 interrupt_status; - - /* - * In INTERRUPT_POLLING_MODE we exit the interrupt handler if the - * hardware indicates nothing is pending. Since we are not being - * called from a real interrupt, we don't want to confuse the hardware - * by servicing the completion queue before the hardware indicates it - * is ready. We'll simply wait for another polling interval and check - * again. - */ - interrupt_status = SMU_ISR_READ(scic); - if ((interrupt_status & - (SMU_ISR_COMPLETION | - SMU_ISR_QUEUE_ERROR | - SMU_ISR_QUEUE_SUSPEND)) == 0) { - return false; - } - - return scic_sds_controller_standard_interrupt_handler( - scic, interrupt_status); -} - -/** - * This is the method provided to handle completions when interrupt polling is - * in use. - */ -static void scic_sds_controller_polling_completion_handler( - struct scic_sds_controller *scic) -{ - if (scic->encountered_fatal_error == true) { - dev_err(scic_to_dev(scic), - "%s: SCIC Controller has encountered a fatal error.\n", - __func__); - - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_FAILED); - } else if (scic_sds_controller_completion_queue_has_entries(scic)) { - if (scic->restrict_completions == false) - scic_sds_controller_process_completions(scic); - else - scic_sds_controller_transitioned_process_completions( - scic); - } - - /* - * The interrupt handler does not adjust the CQ's - * get pointer. So, SCU's INTx pin stays asserted during the - * interrupt handler even though it tries to clear the interrupt - * source. Therefore, the completion handler must ensure that the - * interrupt source is cleared. Otherwise, we get a spurious - * interrupt for which the interrupt handler will not issue a - * corresponding completion event. Also, we unmask interrupts. - */ - SMU_ISR_WRITE( - scic, - (u32)(SMU_ISR_COMPLETION | SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND) - ); -} - -/** - * This is the method provided to handle legacy interrupts for the controller - * object. - * - * bool true if an interrupt is processed false if no interrupt was processed - */ -static bool scic_sds_controller_legacy_interrupt_handler( - struct scic_sds_controller *scic) -{ - u32 interrupt_status; - bool is_completion_needed; - - interrupt_status = SMU_ISR_READ(scic); - is_completion_needed = scic_sds_controller_standard_interrupt_handler( - scic, interrupt_status); - - return is_completion_needed; -} - - -/** - * This is the method provided to handle legacy completions it is expected that - * the SCI User will call this completion handler anytime the interrupt - * handler reports that it has handled an interrupt. - */ -static void scic_sds_controller_legacy_completion_handler( - struct scic_sds_controller *scic) -{ - scic_sds_controller_polling_completion_handler(scic); - SMU_IMR_WRITE(scic, 0x00000000); -} - -/** - * This is the method provided to handle an MSIX interrupt message when there - * is just a single MSIX message being provided by the hardware. This mode - * of operation is single vector mode. - * - * bool true if an interrupt is processed false if no interrupt was processed - */ -static bool scic_sds_controller_single_vector_interrupt_handler( - struct scic_sds_controller *scic) -{ - u32 interrupt_status; - - /* - * Mask the interrupts - * There is a race in the hardware that could cause us not to be notified - * of an interrupt completion if we do not take this step. We will unmask - * the interrupts in the completion routine. */ - SMU_IMR_WRITE(scic, 0xFFFFFFFF); - - interrupt_status = SMU_ISR_READ(scic); - interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); - - if ((interrupt_status == 0) && - scic_sds_controller_completion_queue_has_entries(scic)) { - /* - * There is at least one completion queue entry to process so we can - * return a success and ignore for now the case of an error interrupt */ - SMU_ISR_WRITE(scic, SMU_ISR_COMPLETION); - return true; - } - - if (interrupt_status != 0) { - /* - * There is an error interrupt pending so let it through and handle - * in the callback */ - return true; - } - - /* - * Clear any offending interrupts since we could not find any to handle - * and unmask them all */ - SMU_ISR_WRITE(scic, 0x00000000); - SMU_IMR_WRITE(scic, 0x00000000); - - return false; -} - -/** - * This is the method provided to handle completions for a single MSIX message. - */ -static void scic_sds_controller_single_vector_completion_handler( - struct scic_sds_controller *scic) -{ - u32 interrupt_status; - - interrupt_status = SMU_ISR_READ(scic); - interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); - - if (interrupt_status & SMU_ISR_QUEUE_ERROR) { - dev_err(scic_to_dev(scic), - "%s: SCIC Controller has encountered a fatal error.\n", - __func__); - - /* - * We have a fatal condition and must reset the controller - * Leave the interrupt mask in place and get the controller reset */ - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_FAILED); - return; - } - - if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && - !scic_sds_controller_completion_queue_has_entries(scic)) { - dev_err(scic_to_dev(scic), - "%s: SCIC Controller has encountered a fatal error.\n", - __func__); - - /* - * We have a fatal condtion and must reset the controller - * Leave the interrupt mask in place and get the controller reset */ - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_FAILED); - return; - } - - if (scic_sds_controller_completion_queue_has_entries(scic)) { - scic_sds_controller_process_completions(scic); - - /* - * We dont care which interrupt got us to processing the completion queu - * so clear them both. */ - SMU_ISR_WRITE( - scic, - (SMU_ISR_COMPLETION | SMU_ISR_QUEUE_SUSPEND)); - } - - SMU_IMR_WRITE(scic, 0x00000000); -} - -/** - * This is the method provided to handle a MSIX message for a normal completion. - * - * bool true if an interrupt is processed false if no interrupt was processed - */ bool scic_sds_controller_isr(struct scic_sds_controller *scic) { if (scic_sds_controller_completion_queue_has_entries(scic)) { @@ -1920,10 +1586,6 @@ bool scic_sds_controller_isr(struct scic_sds_controller *scic) return false; } -/** - * This is the method provided to handle the completions for a normal MSIX - * message. - */ void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) { /* Empty out the completion queue */ @@ -1994,14 +1656,6 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) } -/* - * ****************************************************************************- - * * SCIC SDS Controller External Methods - * ****************************************************************************- */ - -/** - * This method returns the sizeof the SCIC SDS Controller Object - */ u32 scic_sds_controller_get_object_size(void) { return sizeof(struct scic_sds_controller); @@ -2535,72 +2189,6 @@ enum sci_status scic_controller_reset( return status; } -/* --------------------------------------------------------------------------- */ - -enum sci_status scic_controller_get_handler_methods( - enum scic_interrupt_type interrupt_type, - u16 message_count, - struct scic_controller_handler_methods *handler_methods) -{ - enum sci_status status = SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT; - - switch (interrupt_type) { - case SCIC_LEGACY_LINE_INTERRUPT_TYPE: - if (message_count == 0) { - handler_methods[0].interrupt_handler - = scic_sds_controller_legacy_interrupt_handler; - handler_methods[0].completion_handler - = scic_sds_controller_legacy_completion_handler; - - status = SCI_SUCCESS; - } - break; - - case SCIC_MSIX_INTERRUPT_TYPE: - if (message_count == 1) { - handler_methods[0].interrupt_handler - = scic_sds_controller_single_vector_interrupt_handler; - handler_methods[0].completion_handler - = scic_sds_controller_single_vector_completion_handler; - - status = SCI_SUCCESS; - } else if (message_count == 2) { - handler_methods[0].interrupt_handler - = scic_sds_controller_isr; - handler_methods[0].completion_handler - = scic_sds_controller_completion_handler; - - handler_methods[1].interrupt_handler - = scic_sds_controller_error_isr; - handler_methods[1].completion_handler - = scic_sds_controller_error_handler; - - status = SCI_SUCCESS; - } - break; - - case SCIC_NO_INTERRUPTS: - if (message_count == 0) { - - handler_methods[0].interrupt_handler - = scic_sds_controller_polling_interrupt_handler; - handler_methods[0].completion_handler - = scic_sds_controller_polling_completion_handler; - - status = SCI_SUCCESS; - } - break; - - default: - status = SCI_FAILURE_INVALID_PARAMETER_VALUE; - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - enum sci_io_status scic_controller_start_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index cce0da6..3e0477d 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -335,19 +335,6 @@ struct scic_sds_controller { */ struct scic_sds_unsolicited_frame_control uf_control; - /** - * This field records the fact that the controller has encountered a fatal - * error and must be reset. - */ - bool encountered_fatal_error; - - /** - * This field specifies that the controller should ignore - * completion processing for non-fastpath events. This will - * cause the completions to be thrown away. - */ - bool restrict_completions; - /* Phy Startup Data */ /** * This field is the driver timer handle for controller phy request startup. diff --git a/drivers/scsi/isci/core/scic_user_callback.h b/drivers/scsi/isci/core/scic_user_callback.h index ec4eb27..d1a3cb8 100644 --- a/drivers/scsi/isci/core/scic_user_callback.h +++ b/drivers/scsi/isci/core/scic_user_callback.h @@ -86,9 +86,8 @@ struct scic_sds_controller; * occurs for the created timer. * * The "timer_callback" method should be executed in a mutually exlusive manner - * from the controller completion handler handler (refer to - * scic_controller_get_handler_methods()). This method returns a handle to a - * timer object created by the user. The handle will be utilized for all + * from the controller completion handler handler. This method returns a handle + * to a timer object created by the user. The handle will be utilized for all * further interactions relating to this timer. */ void *scic_cb_timer_create( -- cgit v0.10.2 From 92cd51153d5c18af027ddf42547d59ba4167873c Mon Sep 17 00:00:00 2001 From: Havard Skinnemoen Date: Fri, 18 Feb 2011 18:32:08 -0800 Subject: isci: Initialize proc_name field in scsi_host_template The proc_name field in struct scsi_host_template is exported through sysfs and allows userspace tools to identify the driver behind a particular SCSI host controller. Initialize this field so that userspace tools can easily identify isci host controllers through sysfs. Signed-off-by: Havard Skinnemoen Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 4d6decb..fda2629 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -113,6 +113,7 @@ static struct scsi_host_template isci_sht = { .module = THIS_MODULE, .name = DRV_NAME, + .proc_name = DRV_NAME, .queuecommand = sas_queuecommand, .target_alloc = sas_target_alloc, .slave_configure = sas_slave_configure, -- cgit v0.10.2 From 858d4aa741c80fb7579cda3517853f0cffc73772 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 22 Feb 2011 01:27:03 -0800 Subject: isci: Move firmware loading to per PCI device Moved the firmware loading from per adapter to per PCI device. This should prevent firmware from being loaded twice becuase of 2 SCU controller per PCI device. We do have to do it per PCI device because request_firmware() requires a struct device passed in. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index cb2e3f9..aa86615 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -354,67 +354,6 @@ void isci_host_deinit(struct isci_host *ihost) scic_controller_reset(scic); } -static int isci_verify_firmware(const struct firmware *fw, - struct isci_firmware *isci_fw) -{ - const u8 *tmp; - - if (fw->size < ISCI_FIRMWARE_MIN_SIZE) - return -EINVAL; - - tmp = fw->data; - - /* 12th char should be the NULL terminate for the ID string */ - if (tmp[11] != '\0') - return -EINVAL; - - if (strncmp("#SCU MAGIC#", tmp, 11) != 0) - return -EINVAL; - - isci_fw->id = tmp; - isci_fw->version = fw->data[ISCI_FW_VER_OFS]; - isci_fw->subversion = fw->data[ISCI_FW_SUBVER_OFS]; - - tmp = fw->data + ISCI_FW_DATA_OFS; - - while (*tmp != ISCI_FW_HDR_EOF) { - switch (*tmp) { - case ISCI_FW_HDR_PHYMASK: - tmp++; - isci_fw->phy_masks_size = *tmp; - tmp++; - isci_fw->phy_masks = (const u32 *)tmp; - tmp += sizeof(u32) * isci_fw->phy_masks_size; - break; - - case ISCI_FW_HDR_PHYGEN: - tmp++; - isci_fw->phy_gens_size = *tmp; - tmp++; - isci_fw->phy_gens = (const u32 *)tmp; - tmp += sizeof(u32) * isci_fw->phy_gens_size; - break; - - case ISCI_FW_HDR_SASADDR: - tmp++; - isci_fw->sas_addrs_size = *tmp; - tmp++; - isci_fw->sas_addrs = (const u64 *)tmp; - tmp += sizeof(u64) * isci_fw->sas_addrs_size; - break; - - default: - pr_err("bad field in firmware binary blob\n"); - return -EINVAL; - } - } - - pr_info("isci firmware v%u.%u loaded.\n", - isci_fw->version, isci_fw->subversion); - - return SCI_SUCCESS; -} - static void __iomem *scu_base(struct isci_host *isci_host) { struct pci_dev *pdev = isci_host->pdev; @@ -442,8 +381,6 @@ int isci_host_init(struct isci_host *isci_host) struct scic_sds_port *scic_port; union scic_oem_parameters scic_oem_params; union scic_user_parameters scic_user_params; - const struct firmware *fw = NULL; - struct isci_firmware *isci_fw = NULL; INIT_LIST_HEAD(&isci_host->timer_list_struct.timers); isci_timer_list_construct( @@ -454,9 +391,11 @@ int isci_host_init(struct isci_host *isci_host) controller = scic_controller_alloc(&isci_host->pdev->dev); if (!controller) { - err = -ENOMEM; - dev_err(&isci_host->pdev->dev, "%s: failed (%d)\n", __func__, err); - goto out; + dev_err(&isci_host->pdev->dev, + "%s: failed (%d)\n", + __func__, + err); + return -ENOMEM; } isci_host->core_controller = controller; @@ -476,8 +415,7 @@ int isci_host_init(struct isci_host *isci_host) "%s: scic_controller_construct failed - status = %x\n", __func__, status); - err = -ENODEV; - goto out; + return -ENODEV; } isci_host->sas_ha.dev = &isci_host->pdev->dev; @@ -487,93 +425,52 @@ int isci_host_init(struct isci_host *isci_host) * set association host adapter struct in core controller. */ sci_object_set_association(isci_host->core_controller, - (void *)isci_host - ); + (void *)isci_host); /* grab initial values stored in the controller object for OEM and USER * parameters */ scic_oem_parameters_get(controller, &scic_oem_params); scic_user_parameters_get(controller, &scic_user_params); - isci_fw = devm_kzalloc(&isci_host->pdev->dev, - sizeof(struct isci_firmware), - GFP_KERNEL); - if (!isci_fw) { - dev_warn(&isci_host->pdev->dev, - "allocating firmware struct failed\n"); - dev_warn(&isci_host->pdev->dev, - "Default OEM configuration being used:" - " 4 narrow ports, and default SAS Addresses\n"); - goto set_default_params; - } - - status = request_firmware(&fw, ISCI_FW_NAME, &isci_host->pdev->dev); - if (status) { - dev_warn(&isci_host->pdev->dev, - "Loading firmware failed, using default values\n"); - dev_warn(&isci_host->pdev->dev, - "Default OEM configuration being used:" - " 4 narrow ports, and default SAS Addresses\n"); - goto set_default_params; - } - else { - status = isci_verify_firmware(fw, isci_fw); - if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "firmware verification failed\n"); - dev_warn(&isci_host->pdev->dev, - "Default OEM configuration being used:" - " 4 narrow ports, and default SAS " - "Addresses\n"); - goto set_default_params; - } - - /* grab any OEM and USER parameters specified at module load */ + if (isci_firmware) { + /* grab any OEM and USER parameters specified in binary blob */ status = isci_parse_oem_parameters(&scic_oem_params, - isci_host->id, isci_fw); + isci_host->id, + isci_firmware); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, "parsing firmware oem parameters failed\n"); - err = -EINVAL; - goto out; + return -EINVAL; } status = isci_parse_user_parameters(&scic_user_params, - isci_host->id, isci_fw); + isci_host->id, + isci_firmware); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, "%s: isci_parse_user_parameters" " failed\n", __func__); - err = -EINVAL; - goto out; + return -EINVAL; + } + } else { + status = scic_oem_parameters_set(isci_host->core_controller, + &scic_oem_params); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: scic_oem_parameters_set failed\n", + __func__); + return -ENODEV; } - } - - set_default_params: - - status = scic_oem_parameters_set(isci_host->core_controller, - &scic_oem_params - ); - - if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "%s: scic_oem_parameters_set failed\n", - __func__); - err = -ENODEV; - goto out; - } - - status = scic_user_parameters_set(isci_host->core_controller, - &scic_user_params - ); - if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "%s: scic_user_parameters_set failed\n", - __func__); - err = -ENODEV; - goto out; + status = scic_user_parameters_set(isci_host->core_controller, + &scic_user_params); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: scic_user_parameters_set failed\n", + __func__); + return -ENODEV; + } } status = scic_controller_initialize(isci_host->core_controller); @@ -582,8 +479,7 @@ int isci_host_init(struct isci_host *isci_host) "%s: scic_controller_initialize failed -" " status = 0x%x\n", __func__, status); - err = -ENODEV; - goto out; + return -ENODEV; } tasklet_init(&isci_host->completion_tasklet, @@ -598,7 +494,7 @@ int isci_host_init(struct isci_host *isci_host) err = isci_host_mdl_allocate_coherent(isci_host); if (err) - goto err_out; + return err; /* * keep the pool alloc size around, will use it for a bounds checking @@ -610,40 +506,27 @@ int isci_host_init(struct isci_host *isci_host) isci_host->dma_pool_alloc_size, SLAB_HWCACHE_ALIGN, 0); - if (!isci_host->dma_pool) { - err = -ENOMEM; - goto req_obj_err_out; - } + if (!isci_host->dma_pool) + return -ENOMEM; - for (index = 0; index < SCI_MAX_PORTS; index++) { + for (index = 0; index < SCI_MAX_PORTS; index++) isci_port_init(&isci_host->isci_ports[index], - isci_host, index); - } + isci_host, + index); for (index = 0; index < SCI_MAX_PHYS; index++) isci_phy_init(&isci_host->phys[index], isci_host, index); /* Why are we doing this? Is this even necessary? */ - memcpy(&isci_host->sas_addr[0], &isci_host->phys[0].sas_addr[0], + memcpy(&isci_host->sas_addr[0], + &isci_host->phys[0].sas_addr[0], SAS_ADDR_SIZE); /* Start the ports */ for (index = 0; index < SCI_MAX_PORTS; index++) { - scic_controller_get_port_handle(controller, index, &scic_port); scic_port_start(scic_port); } - goto out; - -/* SPB_Debug: destroy request object cache */ - req_obj_err_out: -/* SPB_Debug: destroy remote object cache */ - err_out: -/* SPB_Debug: undo controller init, construct and alloc, remove from parent - * controller list. */ - out: - if (fw) - release_firmware(fw); - return err; + return 0; } diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index fda2629..6ca623a 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -82,6 +82,8 @@ static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { {} }; +struct isci_firmware *isci_firmware; + static int __devinit isci_pci_probe( struct pci_dev *pdev, const struct pci_device_id *device_id_p); @@ -519,11 +521,73 @@ static void check_si_rev(struct pci_dev *pdev) } +static int isci_verify_firmware(const struct firmware *fw, + struct isci_firmware *isci_fw) +{ + const u8 *tmp; + + if (fw->size < ISCI_FIRMWARE_MIN_SIZE) + return -EINVAL; + + tmp = fw->data; + + /* 12th char should be the NULL terminate for the ID string */ + if (tmp[11] != '\0') + return -EINVAL; + + if (strncmp("#SCU MAGIC#", tmp, 11) != 0) + return -EINVAL; + + isci_fw->id = tmp; + isci_fw->version = fw->data[ISCI_FW_VER_OFS]; + isci_fw->subversion = fw->data[ISCI_FW_SUBVER_OFS]; + + tmp = fw->data + ISCI_FW_DATA_OFS; + + while (*tmp != ISCI_FW_HDR_EOF) { + switch (*tmp) { + case ISCI_FW_HDR_PHYMASK: + tmp++; + isci_fw->phy_masks_size = *tmp; + tmp++; + isci_fw->phy_masks = (const u32 *)tmp; + tmp += sizeof(u32) * isci_fw->phy_masks_size; + break; + + case ISCI_FW_HDR_PHYGEN: + tmp++; + isci_fw->phy_gens_size = *tmp; + tmp++; + isci_fw->phy_gens = (const u32 *)tmp; + tmp += sizeof(u32) * isci_fw->phy_gens_size; + break; + + case ISCI_FW_HDR_SASADDR: + tmp++; + isci_fw->sas_addrs_size = *tmp; + tmp++; + isci_fw->sas_addrs = (const u64 *)tmp; + tmp += sizeof(u64) * isci_fw->sas_addrs_size; + break; + + default: + pr_err("bad field in firmware binary blob\n"); + return -EINVAL; + } + } + + pr_info("isci firmware v%u.%u loaded.\n", + isci_fw->version, isci_fw->subversion); + + return SCI_SUCCESS; +} + static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct isci_pci_info *pci_info; int err, i; struct isci_host *isci_host; + const struct firmware *fw = NULL; check_si_rev(pdev); @@ -532,6 +596,33 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic return -ENOMEM; pci_set_drvdata(pdev, pci_info); + err = request_firmware(&fw, ISCI_FW_NAME, &pdev->dev); + if (err) { + dev_warn(&pdev->dev, + "Loading firmware failed, using default values\n"); + dev_warn(&pdev->dev, + "Default OEM configuration being used:" + " 4 narrow ports, and default SAS Addresses\n"); + } else { + isci_firmware = devm_kzalloc(&pdev->dev, + sizeof(struct isci_firmware), + GFP_KERNEL); + if (isci_firmware) { + err = isci_verify_firmware(fw, isci_firmware); + if (err != SCI_SUCCESS) { + dev_warn(&pdev->dev, + "firmware verification failed\n"); + dev_warn(&pdev->dev, + "Default OEM configuration being used:" + " 4 narrow ports, and default SAS " + "Addresses\n"); + devm_kfree(&pdev->dev, isci_firmware); + isci_firmware = NULL; + } + } + release_firmware(fw); + } + err = isci_pci_init(pdev); if (err) return err; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 39efd5f..6c79b29 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -86,6 +86,7 @@ #include "sci_status.h" extern struct kmem_cache *isci_kmem_cache; +extern struct isci_firmware *isci_firmware; #define ISCI_FW_NAME "isci/isci_firmware.bin" -- cgit v0.10.2 From 8f31550c77849250ec49d1509b6bb63b4ddc59e4 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Feb 2011 00:14:06 -0800 Subject: isci: phy state machine cleanup step1 c99 the struct initializers: 1/ allows grep to consistently show method name associations. The naming is mostly consistent (except when it isn't) so this guarantees coverage of present and future exception cases. 2/ let's the compiler guarantee that the state table array entry correlates with an actual state name and detect accidental reordering or deletion of states. / allows default handler's to be identified easily Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_phy.h b/drivers/scsi/isci/core/sci_base_phy.h index 6c0d9bb..7e2c7e3 100644 --- a/drivers/scsi/isci/core/sci_base_phy.h +++ b/drivers/scsi/isci/core/sci_base_phy.h @@ -115,9 +115,6 @@ enum sci_base_phy_states { * Simply the final state for the base phy state machine. */ SCI_BASE_PHY_STATE_FINAL, - - SCI_BASE_PHY_MAX_STATES - }; /** @@ -138,9 +135,7 @@ struct sci_base_phy { struct sci_base_state_machine state_machine; }; -typedef enum sci_status (*SCI_BASE_PHY_HANDLER_T)( - struct sci_base_phy * - ); +typedef enum sci_status (*sci_base_phy_handler_t)(struct sci_base_phy *); /** * struct sci_base_phy_state_handler - This structure contains all of the state @@ -155,25 +150,25 @@ struct sci_base_phy_state_handler { * The start_handler specifies the method invoked when there is an * attempt to start a phy. */ - SCI_BASE_PHY_HANDLER_T start_handler; + sci_base_phy_handler_t start_handler; /** * The stop_handler specifies the method invoked when there is an * attempt to stop a phy. */ - SCI_BASE_PHY_HANDLER_T stop_handler; + sci_base_phy_handler_t stop_handler; /** * The reset_handler specifies the method invoked when there is an * attempt to reset a phy. */ - SCI_BASE_PHY_HANDLER_T reset_handler; + sci_base_phy_handler_t reset_handler; /** * The destruct_handler specifies the method invoked when attempting to * destruct a phy. */ - SCI_BASE_PHY_HANDLER_T destruct_handler; + sci_base_phy_handler_t destruct_handler; }; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 743e5a6..98e9179 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -103,7 +103,7 @@ static enum sci_status scic_sds_phy_link_layer_initialization( this_phy->link_layer_registers = link_layer_registers; /* Set our IDENTIFY frame data */ - #define SCI_END_DEVICE 0x01 + #define SCI_END_DEVICE 0x01 SCU_SAS_TIID_WRITE( this_phy, @@ -1406,128 +1406,96 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_p /* --------------------------------------------------------------------------- */ -struct scic_sds_phy_state_handler -scic_sds_phy_starting_substate_handler_table[SCIC_SDS_PHY_STARTING_MAX_SUBSTATES] = -{ - /* SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_default_event_handler, - scic_sds_phy_default_consume_power_handler +const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { + [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_starting_substate_await_ossp_event_handler, - scic_sds_phy_default_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, - scic_sds_phy_default_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, - scic_sds_phy_starting_substate_await_iaf_uf_event_handler, - scic_sds_phy_default_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_starting_substate_await_sas_power_event_handler, - scic_sds_phy_starting_substate_await_sas_power_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, + .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER, */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_starting_substate_await_sata_power_event_handler, - scic_sds_phy_starting_substate_await_sata_power_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, + .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN, */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_starting_substate_await_sata_phy_event_handler, - scic_sds_phy_default_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN, */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_starting_substate_await_sata_speed_event_handler, - scic_sds_phy_default_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF, */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_starting_substate_await_sig_fis_frame_handler, - scic_sds_phy_starting_substate_await_sig_fis_event_handler, - scic_sds_phy_default_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_default_event_handler, - scic_sds_phy_default_consume_power_handler + [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler } }; @@ -2344,80 +2312,60 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler( /* --------------------------------------------------------------------------- */ -struct scic_sds_phy_state_handler -scic_sds_phy_state_handler_table[SCI_BASE_PHY_MAX_STATES] = -{ - /* SCI_BASE_PHY_STATE_INITIAL */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_default_event_handler, - scic_sds_phy_default_consume_power_handler +const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { + [SCI_BASE_PHY_STATE_INITIAL] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCI_BASE_PHY_STATE_STOPPED */ - { - { - scic_sds_phy_stopped_state_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_stopped_state_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_default_event_handler, - scic_sds_phy_default_consume_power_handler + [SCI_BASE_PHY_STATE_STOPPED] = { + .parent.start_handler = scic_sds_phy_stopped_state_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_stopped_state_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCI_BASE_PHY_STATE_STARTING */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_default_event_handler, - scic_sds_phy_default_consume_power_handler + [SCI_BASE_PHY_STATE_STARTING] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCI_BASE_PHY_STATE_READY */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_ready_state_stop_handler, - scic_sds_phy_ready_state_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_ready_state_event_handler, - scic_sds_phy_default_consume_power_handler + [SCI_BASE_PHY_STATE_READY] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_ready_state_stop_handler, + .parent.reset_handler = scic_sds_phy_ready_state_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_ready_state_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCI_BASE_PHY_STATE_RESETTING */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_resetting_state_event_handler, - scic_sds_phy_default_consume_power_handler + [SCI_BASE_PHY_STATE_RESETTING] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_resetting_state_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, - /* SCI_BASE_PHY_STATE_FINAL */ - { - { - scic_sds_phy_default_start_handler, - scic_sds_phy_default_stop_handler, - scic_sds_phy_default_reset_handler, - scic_sds_phy_default_destroy_handler - }, - scic_sds_phy_default_frame_handler, - scic_sds_phy_default_event_handler, - scic_sds_phy_default_consume_power_handler + [SCI_BASE_PHY_STATE_FINAL] = { + .parent.start_handler = scic_sds_phy_default_start_handler, + .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.reset_handler = scic_sds_phy_default_reset_handler, + .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler } }; diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 3b88259..9ba09bb 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -146,11 +146,6 @@ enum SCIC_SDS_PHY_STARTING_SUBSTATES { * Exit state for this state machine */ SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL, - - /** - * Maximum number of substates for the STARTING state machine - */ - SCIC_SDS_PHY_STARTING_MAX_SUBSTATES }; struct scic_sds_port; @@ -248,7 +243,7 @@ struct scic_sds_phy { */ void *sata_timeout_timer; - struct scic_sds_phy_state_handler *state_handlers; + const struct scic_sds_phy_state_handler *state_handlers; struct sci_base_state_machine starting_substate_machine; @@ -260,9 +255,9 @@ struct scic_sds_phy { }; -typedef enum sci_status (*SCIC_SDS_PHY_EVENT_HANDLER_T)(struct scic_sds_phy *, u32); -typedef enum sci_status (*SCIC_SDS_PHY_FRAME_HANDLER_T)(struct scic_sds_phy *, u32); -typedef enum sci_status (*SCIC_SDS_PHY_POWER_HANDLER_T)(struct scic_sds_phy *); +typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32); +typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32); +typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); /** * struct scic_sds_phy_state_handler - @@ -278,25 +273,24 @@ struct scic_sds_phy_state_handler { /** * The state handler for unsolicited frames received from the SCU hardware. */ - SCIC_SDS_PHY_FRAME_HANDLER_T frame_handler; + scic_sds_phy_frame_handler_t frame_handler; /** * The state handler for events received from the SCU hardware. */ - SCIC_SDS_PHY_EVENT_HANDLER_T event_handler; + scic_sds_phy_event_handler_t event_handler; /** * The state handler for staggered spinup. */ - SCIC_SDS_PHY_POWER_HANDLER_T consume_power_handler; + scic_sds_phy_power_handler_t consume_power_handler; }; -extern struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[]; +extern const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[]; extern const struct sci_base_state scic_sds_phy_state_table[]; extern const struct sci_base_state scic_sds_phy_starting_substates[]; -extern struct scic_sds_phy_state_handler - scic_sds_phy_starting_substate_handler_table[]; +extern const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[]; /** -- cgit v0.10.2 From 06fdb3286270a45d05b15db46416b2fe2f52583a Mon Sep 17 00:00:00 2001 From: Tomasz Chudy Date: Wed, 23 Feb 2011 00:08:49 -0800 Subject: isci: fix "no outbound task timeout" default value The default should be 5us. The hardware encodes it in 256ns increments, so the value should be 20 to approximate a 5us timeout. Signed-off-by: Tomasz Chudy Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 53861cc..1cbb91c 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1997,8 +1997,7 @@ static void scic_sds_controller_set_default_config_parameters( this_controller->user_parameters.sds1.ssp_inactivity_timeout = 5; this_controller->user_parameters.sds1.stp_max_occupancy_timeout = 5; this_controller->user_parameters.sds1.ssp_max_occupancy_timeout = 20; - this_controller->user_parameters.sds1.no_outbound_task_timeout = 5; - + this_controller->user_parameters.sds1.no_outbound_task_timeout = 20; } -- cgit v0.10.2 From 246214667f275a952b05a42b3c45a6fcb520bd28 Mon Sep 17 00:00:00 2001 From: Henryk Dembkowski Date: Wed, 23 Feb 2011 00:08:52 -0800 Subject: isci: Move transport layer registers from port to phy At init and RNC resume we need to touch every phy in a port to be sure we have initialized STP properties in the case where port_index != phy_index. Also add some missing __iomem annotations. Signed-off-by: Henryk Dembkowski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 1cbb91c..e597c6b 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -2919,6 +2919,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler( index++) { result = scic_sds_phy_initialize( &this_controller->phy_table[index], + &this_controller->scu_registers->peg0.pe[index].tl, &this_controller->scu_registers->peg0.pe[index].ll ); } @@ -2932,7 +2933,6 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler( index++) { result = scic_sds_port_initialize( &this_controller->port_table[index], - &this_controller->scu_registers->peg0.pe[index].tl, &this_controller->scu_registers->peg0.ptsg.port[index], &this_controller->scu_registers->peg0.ptsg.protocol_engine, &this_controller->scu_registers->peg0.viit[index] diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 98e9179..bd0a6ba 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -62,6 +62,7 @@ #include "scic_sds_phy.h" #include "scic_sds_phy_registers.h" #include "scic_sds_port.h" +#include "scic_sds_remote_node_context.h" #include "scic_user_callback.h" #include "sci_environment.h" #include "sci_util.h" @@ -84,6 +85,31 @@ enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) * ***************************************************************************** */ /** + * This method will initialize the phy transport layer registers + * @this_phy: + * @transport_layer_registers + * + * enum sci_status + */ +static enum sci_status scic_sds_phy_transport_layer_initialization( + struct scic_sds_phy *this_phy, + struct scu_transport_layer_registers __iomem *transport_layer_registers) +{ + u32 tl_control; + + this_phy->transport_layer_registers = transport_layer_registers; + + SCU_STPTLDARNI_WRITE(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); + + /* Hardware team recommends that we enable the STP prefetch for all transports */ + tl_control = SCU_TLCR_READ(this_phy); + tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); + SCU_TLCR_WRITE(this_phy, tl_control); + + return SCI_SUCCESS; +} + +/** * This method will initialize the phy link layer registers * @this_phy: * @link_layer_registers: @@ -92,7 +118,7 @@ enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) */ static enum sci_status scic_sds_phy_link_layer_initialization( struct scic_sds_phy *this_phy, - struct scu_link_layer_registers *link_layer_registers) + struct scu_link_layer_registers __iomem *link_layer_registers) { u32 phy_configuration; struct sas_capabilities phy_capabilities; @@ -361,7 +387,8 @@ void scic_sds_phy_set_port( */ enum sci_status scic_sds_phy_initialize( struct scic_sds_phy *sci_phy, - struct scu_link_layer_registers *link_layer_registers) + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers) { /* Create the SIGNATURE FIS Timeout timer for this phy */ sci_phy->sata_timeout_timer = scic_cb_timer_create( @@ -370,6 +397,9 @@ enum sci_status scic_sds_phy_initialize( sci_phy ); + /* Perfrom the initialization of the TL hardware */ + scic_sds_phy_transport_layer_initialization(sci_phy, transport_layer_registers); + /* Perofrm the initialization of the PE hardware */ scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); @@ -384,6 +414,31 @@ enum sci_status scic_sds_phy_initialize( return SCI_SUCCESS; } +/** + * This method assigns the direct attached device ID for this phy. + * + * @this_phy The phy for which the direct attached device id is to + * be assigned. + * @device_id The direct attached device ID to assign to the phy. + * This will either be the RNi for the device or an invalid RNi if there + * is no current device assigned to the phy. + */ +void scic_sds_phy_setup_transport( + struct scic_sds_phy *this_phy, + u32 device_id) +{ + u32 tl_control; + + SCU_STPTLDARNI_WRITE(this_phy, device_id); + + /* + * The read should guarantee that the first write gets posted + * before the next write + */ + tl_control = SCU_TLCR_READ(this_phy); + tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); + SCU_TLCR_WRITE(this_phy, tl_control); +} /** * @@ -398,10 +453,9 @@ void scic_sds_phy_suspend( u32 scu_sas_pcfg_value; scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + scic_sds_phy_setup_transport(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } /** diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 9ba09bb..dc450c3 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -248,9 +248,15 @@ struct scic_sds_phy { struct sci_base_state_machine starting_substate_machine; /** + * This field is the pointer to the transport layer register for the SCU + * hardware. + */ + struct scu_transport_layer_registers __iomem *transport_layer_registers; + + /** * This field points to the link layer register set within the SCU. */ - struct scu_link_layer_registers *link_layer_registers; + struct scu_link_layer_registers __iomem *link_layer_registers; }; @@ -383,7 +389,8 @@ void scic_sds_phy_set_port( enum sci_status scic_sds_phy_initialize( struct scic_sds_phy *this_phy, - struct scu_link_layer_registers *link_layer_registers); + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers); enum sci_status scic_sds_phy_start( struct scic_sds_phy *this_phy); @@ -402,6 +409,10 @@ void scic_sds_phy_suspend( void scic_sds_phy_resume( struct scic_sds_phy *this_phy); +void scic_sds_phy_setup_transport( + struct scic_sds_phy *this_phy, + u32 device_id); + /* --------------------------------------------------------------------------- */ enum sci_status scic_sds_phy_event_handler( diff --git a/drivers/scsi/isci/core/scic_sds_phy_registers.h b/drivers/scsi/isci/core/scic_sds_phy_registers.h index 7883819..2842176 100644 --- a/drivers/scsi/isci/core/scic_sds_phy_registers.h +++ b/drivers/scsi/isci/core/scic_sds_phy_registers.h @@ -65,6 +65,59 @@ #include "scic_sds_controller.h" +/* ************************************************************************** + * * SCU TRANSPORT LAYER REGISTER OPERATIONS + * ************************************************************************** */ + +/** + * Macro to read the transport layer register associated with this phy + * object. + */ +#define scu_transport_layer_read(phy, reg) \ + scu_register_read( \ + scic_sds_phy_get_controller(phy), \ + (phy)->transport_layer_registers->reg \ + ) + +/** + * Macro to write the transport layer register associated with this phy + * object. + */ +#define scu_transport_layer_write(phy, reg, value) \ + scu_register_write( \ + scic_sds_phy_get_controller(phy), \ + (phy)->transport_layer_registers->reg, \ + (value) \ + ) + +/* ************************************************************************** + * * Transport Layer registers controlled by the phy object + * ************************************************************************** */ + +/* This macro reads the Transport layer control register */ +#define SCU_TLCR_READ(phy) \ + scu_transport_layer_read(phy, control) + +/* This macro writes the Transport layer control register */ +#define SCU_TLCR_WRITE(phy, value) \ + scu_transport_layer_write(phy, control, value) + +/* This macro reads the Transport layer address translation register */ +#define SCU_TLADTR_READ(phy) \ + scu_transport_layer_read(phy, address_translation) + +/* This macro writes the Transport layer address translation register */ +#define SCU_TLADTR_WRITE(phy) \ + scu_transport_layer_write(phy, address_translation, value) + +/* This macro writes the STP Transport Layer Direct Attached RNi register */ +#define SCU_STPTLDARNI_WRITE(phy, index) \ + scu_transport_layer_write(phy, stp_rni, index) + +/* This macro reads the STP Transport Layer Direct Attached RNi register */ +#define SCU_STPTLDARNI_READ(phy) \ + scu_transport_layer_read(phy, stp_rni) + /* * ***************************************************************************** * * SCU LINK LAYER REGISTER OPERATIONS diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index ff06f8c..b8acc23 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -531,7 +531,6 @@ void scic_sds_port_construct( this_port->timer_handle = NULL; - this_port->transport_layer_registers = NULL; this_port->port_task_scheduler_registers = NULL; for (index = 0; index < SCI_MAX_PHYS; index++) { @@ -553,30 +552,14 @@ void scic_sds_port_construct( */ enum sci_status scic_sds_port_initialize( struct scic_sds_port *this_port, - void *transport_layer_registers, - void *port_task_scheduler_registers, - void *port_configuration_regsiter, - void *viit_registers) + void __iomem *port_task_scheduler_registers, + void __iomem *port_configuration_regsiter, + void __iomem *viit_registers) { - u32 tl_control; - - this_port->transport_layer_registers = transport_layer_registers; this_port->port_task_scheduler_registers = port_task_scheduler_registers; this_port->port_pe_configuration_register = port_configuration_regsiter; this_port->viit_registers = viit_registers; - scic_sds_port_set_direct_attached_device_id( - this_port, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX - ); - - /* - * Hardware team recommends that we enable the STP prefetch - * for all ports */ - tl_control = SCU_TLCR_READ(this_port); - tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); - SCU_TLCR_WRITE(this_port, tl_control); - /* * If this is not the dummy port make the assignment of * the timer and start the state machine */ @@ -693,29 +676,25 @@ enum sci_status scic_port_hard_reset( } /** - * - * @this_port: The port for which the direct attached device id is to be - * assigned. - * * This method assigns the direct attached device ID for this port. + * + * @param[in] this_port The port for which the direct attached device id is to + * be assigned. + * @param[in] device_id The direct attached device ID to assign to the port. + * This will be the RNi for the device */ -void scic_sds_port_set_direct_attached_device_id( +void scic_sds_port_setup_transports( struct scic_sds_port *this_port, u32 device_id) { - u32 tl_control; - - SCU_STPTLDARNI_WRITE(this_port, device_id); + u8 index; - /* - * The read should guarntee that the first write gets posted - * before the next write */ - tl_control = SCU_TLCR_READ(this_port); - tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); - SCU_TLCR_WRITE(this_port, tl_control); + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (this_port->active_phy_mask & (1 << index)) + scic_sds_phy_setup_transport(this_port->phy_table[index], device_id); + } } - /** * * @this_port: This is the port on which the phy should be enabled. @@ -1550,16 +1529,12 @@ static void scic_sds_port_suspend_port_task_scheduler( struct scic_sds_port *this_port) { u32 pts_control_value; - u32 tl_control_value; pts_control_value = scu_port_task_scheduler_read(this_port, control); - tl_control_value = scu_transport_layer_read(this_port, control); pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); - tl_control_value |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); scu_port_task_scheduler_write(this_port, control, pts_control_value); - scu_transport_layer_write(this_port, control, tl_control_value); } /** @@ -2624,11 +2599,6 @@ static void scic_sds_port_resetting_state_enter( scic_sds_port_set_base_state_handlers( this_port, SCI_BASE_PORT_STATE_RESETTING ); - - scic_sds_port_set_direct_attached_device_id( - this_port, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX - ); } /** diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 56c15fc..3eb80cb 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -180,17 +180,12 @@ struct scic_sds_port { struct sci_base_state_machine ready_substate_machine; /* / Memory mapped hardware register space */ - /** - * This field is the pointer to the transport layer register for the SCU - * hardware. - */ - struct scu_transport_layer_registers *transport_layer_registers; /** * This field is the pointer to the port task scheduler registers for the SCU * hardware. */ - struct scu_port_task_scheduler_registers *port_task_scheduler_registers; + struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers; /** * This field is identical for all port objects and points to the port task @@ -202,7 +197,7 @@ struct scic_sds_port { /** * This field is the VIIT register space for ths port object. */ - struct scu_viit_entry *viit_registers; + struct scu_viit_entry __iomem *viit_registers; }; @@ -345,10 +340,9 @@ void scic_sds_port_construct( enum sci_status scic_sds_port_initialize( struct scic_sds_port *this_port, - void *transport_layer_registers, - void *port_task_scheduler_registers, - void *port_configuration_regsiter, - void *viit_registers); + void __iomem *port_task_scheduler_registers, + void __iomem *port_configuration_regsiter, + void __iomem *viit_registers); /* --------------------------------------------------------------------------- */ @@ -360,7 +354,7 @@ enum sci_status scic_sds_port_remove_phy( struct scic_sds_port *this_port, struct scic_sds_phy *the_phy); -void scic_sds_port_set_direct_attached_device_id( +void scic_sds_port_setup_transports( struct scic_sds_port *this_port, u32 device_id); diff --git a/drivers/scsi/isci/core/scic_sds_port_registers.h b/drivers/scsi/isci/core/scic_sds_port_registers.h index cf8bc07..dbe82d8 100644 --- a/drivers/scsi/isci/core/scic_sds_port_registers.h +++ b/drivers/scsi/isci/core/scic_sds_port_registers.h @@ -64,29 +64,6 @@ */ /** - * scu_transport_layer_read() - - * - * Macro to read the transport layer register associated with this port object. - */ -#define scu_transport_layer_read(port, reg) \ - scu_register_read(\ - scic_sds_port_get_controller(port), \ - (port)->transport_layer_registers->reg \ - ) - -/** - * scu_transport_layer_write() - - * - * Macro to write the transport layer register associated with this port object. - */ -#define scu_transport_layer_write(port, reg, value) \ - scu_register_write(\ - scic_sds_port_get_controller(port), \ - (port)->transport_layer_registers->reg, \ - (value) \ - ) - -/** * scu_port_task_scheduler_read() - * * Macro to read the port task scheduler register associated with this port @@ -120,59 +97,6 @@ /* * **************************************************************************** - * * Transport Layer registers controlled by the port object - * **************************************************************************** */ - -/** - * SCU_TLCR_READ() - - * - * This macro reads the Transport layer control register - */ -#define SCU_TLCR_READ(port) \ - scu_transport_layer_read(port, control) - -/** - * SCU_TLCR_WRITE() - - * - * This macro writes the Transport layer control register - */ -#define SCU_TLCR_WRITE(port, value) \ - scu_transport_layer_write(port, control, value) - -/** - * SCU_TLADTR_READ() - - * - * This macro reads the Transport layer address translation register - */ -#define SCU_TLADTR_READ(port) \ - scu_transport_layer_read(port, address_translation) - -/** - * SCU_TLADTR_WRITE() - - * - * This macro writes the Transport layer address translation register - */ -#define SCU_TLADTR_WRITE(port) \ - scu_transport_layer_write(port, address_translation, value) - -/** - * SCU_STPTLDARNI_WRITE() - - * - * This macro writes the STP Transport Layer Direct Attached RNi register. - */ -#define SCU_STPTLDARNI_WRITE(port, index) \ - scu_transport_layer_write(port, stp_rni, index) - -/** - * SCU_STPTLDARNI_READ() - - * - * This macro reads the STP Transport Layer Direct Attached RNi register. - */ -#define SCU_STPTLDARNI_READ(port) \ - scu_transport_layer_read(port, stp_rni) - -/* - * **************************************************************************** * * Port Task Scheduler registers controlled by the port object * **************************************************************************** */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 643247f..cb1cf39 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1210,11 +1210,6 @@ static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX ); - scic_sds_port_set_direct_attached_device_id( - this_device->owning_port, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX - ); - sci_base_state_machine_change_state( scic_sds_remote_device_get_base_state_machine(this_device), SCI_BASE_REMOTE_DEVICE_STATE_FINAL @@ -2018,11 +2013,6 @@ static void scic_sds_remote_device_resetting_state_exit( { struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; - scic_sds_port_set_direct_attached_device_id( - scic_sds_remote_device_get_port(this_device), - this_device->rnc->remote_node_index - ); - scic_sds_remote_node_context_resume(this_device->rnc, NULL, NULL); } diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/core/scic_sds_remote_node_context.c index 7fec322..253b2d8 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.c +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.c @@ -689,11 +689,6 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha } else if (protocols.u.bits.attached_stp_target == 1) { if (this_rnc->device->is_direct_attached) { /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ - scic_sds_port_set_direct_attached_device_id( - this_rnc->device->owning_port, - this_rnc->remote_node_index - ); - sci_base_state_machine_change_state( &this_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE @@ -986,7 +981,7 @@ static void scic_sds_remote_node_context_validate_context_buffer( ); if (this_rnc->device->is_direct_attached) { - scic_sds_port_set_direct_attached_device_id( + scic_sds_port_setup_transports( this_rnc->device->owning_port, this_rnc->remote_node_index ); @@ -1016,13 +1011,6 @@ static void scic_sds_remote_node_context_invalidate_context_buffer( this_rnc->device, SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE ); - - if (this_rnc->device->is_direct_attached) { - scic_sds_port_set_direct_attached_device_id( - this_rnc->device->owning_port, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX - ); - } } /* @@ -1112,6 +1100,7 @@ static void scic_sds_remote_node_context_resuming_state_enter( struct sci_base_object *object) { struct scic_sds_remote_node_context *rnc; + struct smp_discover_response_protocols protocols; rnc = (struct scic_sds_remote_node_context *)object; @@ -1121,6 +1110,20 @@ static void scic_sds_remote_node_context_resuming_state_enter( SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE ); + /* + * For direct attached SATA devices we need to clear the TLCR + * NCQ to TCi tag mapping on the phy and in cases where we + * resume because of a target reset we also need to update + * the STPTLDARNI register with the RNi of the device + */ + scic_remote_device_get_protocols(rnc->device, &protocols); + + if ((protocols.u.bits.attached_stp_target == 1) && + (rnc->device->is_direct_attached)) { + scic_sds_port_setup_transports( + rnc->device->owning_port, rnc->remote_node_index); + } + scic_sds_remote_device_post_request( rnc->device, SCU_CONTEXT_COMMAND_POST_RNC_RESUME -- cgit v0.10.2 From d9def184b39b966b7496dfbfad126808d3cd701b Mon Sep 17 00:00:00 2001 From: Jacek Danecki Date: Wed, 23 Feb 2011 00:08:58 -0800 Subject: isci: Add support for user parameters in SCIC layer Add support for the following parameters in SCIC: /** * This field specifies the NOTIFY (ENABLE SPIN UP) primitive * insertion frequency for this phy index. */ u32 notify_enable_spin_up_insertion_frequency; /** * This method specifies the number of transmitted DWORDs within which * to transmit a single ALIGN primitive. This value applies regardless * of what type of device is attached or connection state. A value of * 0 indicates that no ALIGN primitives will be inserted. */ u16 align_insertion_frequency; /** * This method specifies the number of transmitted DWORDs within which * to transmit 2 ALIGN primitives. This applies for SAS connections * only. A minimum value of 3 is required for this field. */ u16 in_connection_align_insertion_frequency; Signed-off-by: Krzysztof Wierzbicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index e597c6b..d9fca99 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -616,7 +616,6 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) scu_afe_register_write(scic, afe_bias_control, 0x00005500); else scu_afe_register_write(scic, afe_bias_control, 0x00005A00); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); @@ -625,7 +624,7 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) scu_afe_register_write(scic, afe_pll_control0, 0x80040A08); else scu_afe_register_write(scic, afe_pll_control0, 0x80040908); - + scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); /* Wait for the PLL to lock */ @@ -1962,17 +1961,16 @@ void scic_sds_controller_release_frame( * configuration parameters to their default values. * */ -static void scic_sds_controller_set_default_config_parameters( - struct scic_sds_controller *this_controller) +static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) { u16 index; /* Default to no SSC operation. */ - this_controller->oem_parameters.sds1.controller.do_enable_ssc = false; + scic->oem_parameters.sds1.controller.do_enable_ssc = false; /* Initialize all of the port parameter information to narrow ports. */ for (index = 0; index < SCI_MAX_PORTS; index++) { - this_controller->oem_parameters.sds1.ports[index].phy_mask = 0; + scic->oem_parameters.sds1.ports[index].phy_mask = 0; } /* Initialize all of the phy parameter information. */ @@ -1980,24 +1978,27 @@ static void scic_sds_controller_set_default_config_parameters( /* * Default to 3G (i.e. Gen 2) for now. User can override if * they choose. */ - this_controller->user_parameters.sds1.phys[index].max_speed_generation = 2; + scic->user_parameters.sds1.phys[index].max_speed_generation = 2; + + /* the frequencies cannot be 0 */ + scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; + scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff; + scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; /* * Previous Vitesse based expanders had a arbitration issue that * is worked around by having the upper 32-bits of SAS address * with a value greater then the Vitesse company identifier. * Hence, usage of 0x5FCFFFFF. */ - this_controller->oem_parameters.sds1.phys[index].sas_address.low - = 0x00000001; - this_controller->oem_parameters.sds1.phys[index].sas_address.high - = 0x5FCFFFFF; + scic->oem_parameters.sds1.phys[index].sas_address.low = 0x00000001; + scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; } - this_controller->user_parameters.sds1.stp_inactivity_timeout = 5; - this_controller->user_parameters.sds1.ssp_inactivity_timeout = 5; - this_controller->user_parameters.sds1.stp_max_occupancy_timeout = 5; - this_controller->user_parameters.sds1.ssp_max_occupancy_timeout = 20; - this_controller->user_parameters.sds1.no_outbound_task_timeout = 20; + scic->user_parameters.sds1.stp_inactivity_timeout = 5; + scic->user_parameters.sds1.ssp_inactivity_timeout = 5; + scic->user_parameters.sds1.stp_max_occupancy_timeout = 5; + scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20; + scic->user_parameters.sds1.no_outbound_task_timeout = 20; } @@ -2103,9 +2104,9 @@ u32 scic_controller_get_suggested_start_timeout( * per interval - 1 (once OEM parameters are supported). * Currently we assume only 1 phy per interval. */ - return (SCIC_SDS_SIGNATURE_FIS_TIMEOUT + return SCIC_SDS_SIGNATURE_FIS_TIMEOUT + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT - + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL)); + + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); } /* --------------------------------------------------------------------------- */ @@ -2489,16 +2490,29 @@ enum sci_status scic_user_parameters_set( * Validate the user parameters. If they are not legal, then * return a failure. */ for (index = 0; index < SCI_MAX_PHYS; index++) { - if (! - (scic_parms->sds1.phys[index].max_speed_generation + if (!(scic_parms->sds1.phys[index].max_speed_generation <= SCIC_SDS_PARM_MAX_SPEED && scic_parms->sds1.phys[index].max_speed_generation - > SCIC_SDS_PARM_NO_SPEED - ) + > SCIC_SDS_PARM_NO_SPEED)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if (scic_parms->sds1.phys[index].in_connection_align_insertion_frequency < 3) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + if ( + (scic_parms->sds1.phys[index].in_connection_align_insertion_frequency < 3) || + (scic_parms->sds1.phys[index].align_insertion_frequency == 0) || + (scic_parms->sds1.phys[index].notify_enable_spin_up_insertion_frequency == 0) ) return SCI_FAILURE_INVALID_PARAMETER_VALUE; } + if ((scic_parms->sds1.stp_inactivity_timeout == 0) || + (scic_parms->sds1.ssp_inactivity_timeout == 0) || + (scic_parms->sds1.stp_max_occupancy_timeout == 0) || + (scic_parms->sds1.ssp_max_occupancy_timeout == 0) || + (scic_parms->sds1.no_outbound_task_timeout == 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms)); return SCI_SUCCESS; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index bd0a6ba..ecd7cc6 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -125,6 +125,7 @@ static enum sci_status scic_sds_phy_link_layer_initialization( u32 parity_check = 0; u32 parity_count = 0; u32 link_layer_control; + u32 clksm_value = 0; this_phy->link_layer_registers = link_layer_registers; @@ -199,7 +200,20 @@ static enum sci_status scic_sds_phy_link_layer_initialization( SCU_SAS_PHYCAP_WRITE(this_phy, phy_capabilities.u.all); /* Set the enable spinup period but disable the ability to send notify enable spinup */ - SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT, 0x33)); + SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT, + this_phy->owning_port->owning_controller->user_parameters.sds1. + phys[this_phy->phy_index].notify_enable_spin_up_insertion_frequency)); + + /* Write the ALIGN Insertion Ferequency for connected phy and inpendent of connected state */ + clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, + this_phy->owning_port->owning_controller->user_parameters.sds1. + phys[this_phy->phy_index].in_connection_align_insertion_frequency); + + clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, + this_phy->owning_port->owning_controller->user_parameters.sds1. + phys[this_phy->phy_index].align_insertion_frequency); + + SCU_SAS_CLKSM_WRITE(this_phy, clksm_value); #if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) || defined(CONFIG_PBG_HBA_BETA) /* / @todo Provide a way to write this register correctly */ diff --git a/drivers/scsi/isci/core/scic_sds_phy_registers.h b/drivers/scsi/isci/core/scic_sds_phy_registers.h index 2842176..ddbb236 100644 --- a/drivers/scsi/isci/core/scic_sds_phy_registers.h +++ b/drivers/scsi/isci/core/scic_sds_phy_registers.h @@ -217,6 +217,14 @@ #define SCU_SAS_ENSPINUP_WRITE(phy, value) \ scu_link_layer_register_write(phy, notify_enable_spinup_control, value) +/* This macro reads the CLKSM register */ +#define SCU_SAS_CLKSM_READ(phy) \ + scu_link_layer_register_read(phy, clock_skew_management) + +/* This macro writes the CLKSM register */ +#define SCU_SAS_CLKSM_WRITE(phy, value) \ + scu_link_layer_register_write(phy, clock_skew_management, value) + /* / This macro reads the PHY Capacity register */ #define SCU_SAS_PHYCAP_READ(phy) \ scu_link_layer_register_read(phy, phy_capabilities) diff --git a/drivers/scsi/isci/core/scu_registers.h b/drivers/scsi/isci/core/scu_registers.h index de2ce93..05a1411 100644 --- a/drivers/scsi/isci/core/scu_registers.h +++ b/drivers/scsi/isci/core/scu_registers.h @@ -611,6 +611,13 @@ #define SCU_SAS_PCFG_GEN_BIT(name) \ SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_SHIFT (0) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_MASK (0x000007FF) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_SHIFT (16) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_MASK (0x00ff0000) + +#define SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_##name, value) #define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT (0) #define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK (0x0003FFFF) -- cgit v0.10.2 From 3c06c2839dac6db56a1e6bd11924db38eddfb2ed Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Feb 2011 00:09:01 -0800 Subject: isci: clean up remaining silicon revision ifdefs in phy init Use the dynamic revision detection code in scic_sds_phy_link_layer_initialization() and apply some coding style fixups (long deref chains). The compile time max link rate setting is removed in favor of honoring the user-parameter max. Reported-by: Krzysztof Wierzbicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index 8bd8560..485fefc 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -114,7 +114,7 @@ struct scic_sds_controller; * */ struct scic_sds_user_parameters { - struct { + struct sci_phy_user_params { /** * This field specifies the NOTIFY (ENABLE SPIN UP) primitive * insertion frequency for this phy index. @@ -250,7 +250,7 @@ struct scic_sds_oem_parameters { } ports[SCI_MAX_PORTS]; - struct { + struct sci_phy_oem_params { /** * This field specifies the SAS address to be transmitted on * for this phy index. diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index d9fca99..e8d09fd 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -584,21 +584,6 @@ void scic_sds_controller_enable_port_task_scheduler( */ #define AFE_REGISTER_WRITE_DELAY 10 -static bool is_a0(void) -{ - return isci_si_rev == ISCI_SI_REVA0; -} - -static bool is_a2(void) -{ - return isci_si_rev == ISCI_SI_REVA2; -} - -static bool is_b0(void) -{ - return isci_si_rev > ISCI_SI_REVA2; -} - /* Initialize the AFE for this phy index. We need to read the AFE setup from * the OEM parameters none */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index ecd7cc6..e8d5be7 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -111,62 +111,55 @@ static enum sci_status scic_sds_phy_transport_layer_initialization( /** * This method will initialize the phy link layer registers - * @this_phy: + * @sci_phy: * @link_layer_registers: * * enum sci_status */ -static enum sci_status scic_sds_phy_link_layer_initialization( - struct scic_sds_phy *this_phy, - struct scu_link_layer_registers __iomem *link_layer_registers) +static enum sci_status +scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, + struct scu_link_layer_registers __iomem *link_layer_registers) { + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + int phy_idx = sci_phy->phy_index; + struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx]; + struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx]; u32 phy_configuration; struct sas_capabilities phy_capabilities; u32 parity_check = 0; u32 parity_count = 0; - u32 link_layer_control; + u32 llctl, link_rate; u32 clksm_value = 0; - this_phy->link_layer_registers = link_layer_registers; + sci_phy->link_layer_registers = link_layer_registers; /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 - SCU_SAS_TIID_WRITE( - this_phy, - (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) - | SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) - | SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) - | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) - | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE)) - ); + SCU_SAS_TIID_WRITE(sci_phy, (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | + SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE))); /* Write the device SAS Address */ - SCU_SAS_TIDNH_WRITE(this_phy, 0xFEDCBA98); - SCU_SAS_TIDNL_WRITE(this_phy, this_phy->phy_index); + SCU_SAS_TIDNH_WRITE(sci_phy, 0xFEDCBA98); + SCU_SAS_TIDNL_WRITE(sci_phy, phy_idx); /* Write the source SAS Address */ - SCU_SAS_TISSAH_WRITE( - this_phy, - this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[ - this_phy->phy_index].sas_address.high - ); - SCU_SAS_TISSAL_WRITE( - this_phy, - this_phy->owning_port->owning_controller->oem_parameters.sds1.phys[ - this_phy->phy_index].sas_address.low - ); + SCU_SAS_TISSAH_WRITE(sci_phy, phy_oem->sas_address.high); + SCU_SAS_TISSAL_WRITE(sci_phy, phy_oem->sas_address.low); /* Clear and Set the PHY Identifier */ - SCU_SAS_TIPID_WRITE(this_phy, 0x00000000); - SCU_SAS_TIPID_WRITE(this_phy, SCU_SAS_TIPID_GEN_VALUE(ID, this_phy->phy_index)); + SCU_SAS_TIPID_WRITE(sci_phy, 0x00000000); + SCU_SAS_TIPID_WRITE(sci_phy, SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx)); /* Change the initial state of the phy configuration register */ - phy_configuration = SCU_SAS_PCFG_READ(this_phy); + phy_configuration = SCU_SAS_PCFG_READ(sci_phy); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(this_phy, phy_configuration); + SCU_SAS_PCFG_WRITE(sci_phy, phy_configuration); /* Configure the SNW capabilities */ phy_capabilities.u.all = 0; @@ -174,8 +167,7 @@ static enum sci_status scic_sds_phy_link_layer_initialization( phy_capabilities.u.bits.gen3_without_ssc_supported = 1; phy_capabilities.u.bits.gen2_without_ssc_supported = 1; phy_capabilities.u.bits.gen1_without_ssc_supported = 1; - if (this_phy->owning_port->owning_controller->oem_parameters.sds1. - controller.do_enable_ssc == true) { + if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { phy_capabilities.u.bits.gen3_with_ssc_supported = 1; phy_capabilities.u.bits.gen2_with_ssc_supported = 1; phy_capabilities.u.bits.gen1_with_ssc_supported = 1; @@ -197,93 +189,66 @@ static enum sci_status scic_sds_phy_link_layer_initialization( if ((parity_count % 2) != 0) phy_capabilities.u.bits.parity = 1; - SCU_SAS_PHYCAP_WRITE(this_phy, phy_capabilities.u.all); + SCU_SAS_PHYCAP_WRITE(sci_phy, phy_capabilities.u.all); - /* Set the enable spinup period but disable the ability to send notify enable spinup */ - SCU_SAS_ENSPINUP_WRITE(this_phy, SCU_ENSPINUP_GEN_VAL(COUNT, - this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].notify_enable_spin_up_insertion_frequency)); + /* Set the enable spinup period but disable the ability to send + * notify enable spinup + */ + SCU_SAS_ENSPINUP_WRITE(sci_phy, SCU_ENSPINUP_GEN_VAL(COUNT, + phy_user->notify_enable_spin_up_insertion_frequency)); - /* Write the ALIGN Insertion Ferequency for connected phy and inpendent of connected state */ + /* Write the ALIGN Insertion Ferequency for connected phy and + * inpendent of connected state + */ clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, - this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].in_connection_align_insertion_frequency); + phy_user->in_connection_align_insertion_frequency); clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, - this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].align_insertion_frequency); - - SCU_SAS_CLKSM_WRITE(this_phy, clksm_value); - -#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) || defined(CONFIG_PBG_HBA_BETA) - /* / @todo Provide a way to write this register correctly */ - scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x02108421); -#else - /* / @todo Provide a way to write this register correctly */ - scu_link_layer_register_write(this_phy, afe_lookup_table_control, 0x0e739ce7); -#endif - - link_layer_control = SCU_SAS_LLCTL_GEN_VAL( - NO_OUTBOUND_TASK_TIMEOUT, - (u8)this_phy->owning_port->owning_controller-> - user_parameters.sds1.no_outbound_task_timeout - ); + phy_user->align_insertion_frequency); -/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 */ -/* #define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 */ -#define COMPILED_MAX_LINK_RATE SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 + SCU_SAS_CLKSM_WRITE(sci_phy, clksm_value); - if (this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN3_SPEED) { - link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( - MAX_LINK_RATE, COMPILED_MAX_LINK_RATE - ); - } else if (this_phy->owning_port->owning_controller->user_parameters.sds1. - phys[this_phy->phy_index].max_speed_generation == SCIC_SDS_PARM_GEN2_SPEED) { - link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( - MAX_LINK_RATE, - min( - SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2, - COMPILED_MAX_LINK_RATE) - ); - } else { - link_layer_control |= SCU_SAS_LLCTL_GEN_VAL( - MAX_LINK_RATE, - min( - SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1, - COMPILED_MAX_LINK_RATE) - ); - } + /* @todo Provide a way to write this register correctly */ + scu_link_layer_register_write(sci_phy, afe_lookup_table_control, 0x02108421); - scu_link_layer_register_write( - this_phy, link_layer_control, link_layer_control - ); + llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, + (u8)scic->user_parameters.sds1.no_outbound_task_timeout); - /* - * Program the max ARB time for the PHY to 700us so we inter-operate with - * the PMC expander which shuts down PHYs if the expander PHY generates too - * many breaks. This time value will guarantee that the initiator PHY will - * generate the break. */ -#if defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) - scu_link_layer_register_write( - this_phy, - maximum_arbitration_wait_timer_timeout, - SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME - ); -#endif /* defined(CONFIG_PBG_HBA_A0) || defined(CONFIG_PBG_HBA_A2) */ + switch(phy_user->max_speed_generation) { + case SCIC_SDS_PARM_GEN3_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; + break; + case SCIC_SDS_PARM_GEN2_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; + break; + default: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; + break; + } + llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); + + scu_link_layer_register_write(sci_phy, link_layer_control, llctl); + + if (is_a0() || is_a2()) { + /* Program the max ARB time for the PHY to 700us so we inter-operate with + * the PMC expander which shuts down PHYs if the expander PHY generates too + * many breaks. This time value will guarantee that the initiator PHY will + * generate the break. + */ + scu_link_layer_register_write(sci_phy, + maximum_arbitration_wait_timer_timeout, + SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME); + } /* * Set the link layer hang detection to 500ms (0x1F4) from its default * value of 128ms. Max value is 511 ms. */ - scu_link_layer_register_write( - this_phy, link_layer_hang_detection_timeout, 0x1F4 - ); + scu_link_layer_register_write(sci_phy, link_layer_hang_detection_timeout, + 0x1F4); /* We can exit the initial state to the stopped state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_STOPPED - ); + sci_base_state_machine_change_state(scic_sds_phy_get_base_state_machine(sci_phy), + SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index e1020ee..8d57f95 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -108,5 +108,19 @@ enum { extern int isci_si_rev; +static inline bool is_a0(void) +{ + return isci_si_rev == ISCI_SI_REVA0; +} + +static inline bool is_a2(void) +{ + return isci_si_rev == ISCI_SI_REVA2; +} + +static inline bool is_b0(void) +{ + return isci_si_rev > ISCI_SI_REVA2; +} #endif -- cgit v0.10.2 From 52b957c80c3be9bab2748b0ac59ed3c3e8ffe196 Mon Sep 17 00:00:00 2001 From: Tomasz Chudy Date: Wed, 23 Feb 2011 00:09:04 -0800 Subject: isci: Add Support for new TC completion codes Update the SCI Core to comprehend the changes in the TC completion codes from A0 to B0. Specifically, there isnew R_ER code differences for command and data FISes. Changes are as follows: 1) 0x16 now additionally indicates an R_ERR received for a COMMAND FIS being sent to a SATA target. 0x16 for SSP still indicates a NAK received for a COMMAND frame. Fix is to retry TC to be compliant with SATA spec or ensure proper error handling of return value (not spec compliant I don't believe). 2) 0x1B was previously called DONE_BREAK_RCVD for STP and DONE_LL_ABORT_ERR for SSP. Now it is universally called DONE_LL_ABORT_ERR. This is purely a superficial change. 3) 0x32 is no longer a reserved code. Now it indicates DONE_CMD_SDMA_ERR for STP/SSP. There was a fatal error on the SDMA for a command IU (includes Raw frames). Consider retry, but at a minimum gracefully fail the request. 4) 0x33 is no longer a reserved code. Now it indicates DONE_CMD_LL_ABORT_ERR for SSP. There was a break receivd during transmission of a command IU. Consider retry, but at a minimum gracefully fail the request. Signed-off-by: Tomasz Chudy Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 0b6b055..6d280c0 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -1602,9 +1602,11 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi /* * / @todo Check to see if any of these completion status need to wait for * / the device to host register fis. */ + /* / @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0 */ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): scic_sds_remote_device_suspend( this_request->parent.target_device, diff --git a/drivers/scsi/isci/core/scu_completion_codes.h b/drivers/scsi/isci/core/scu_completion_codes.h index 17ee4c8..c8b329c 100644 --- a/drivers/scsi/isci/core/scu_completion_codes.h +++ b/drivers/scsi/isci/core/scu_completion_codes.h @@ -228,6 +228,7 @@ #define SCU_TASK_DONE_CHECK_RESPONSE ((u32)0x14) #define SCU_TASK_DONE_GEN_RESPONSE ((u32)0x15) #define SCU_TASK_DONE_NAK_CMD_ERR ((u32)0x16) +#define SCU_TASK_DONE_CMD_LL_R_ERR ((u32)0x16) #define SCU_TASK_DONE_LL_R_ERR ((u32)0x17) #define SCU_TASK_DONE_ACK_NAK_TO ((u32)0x17) #define SCU_TASK_DONE_LL_PERR ((u32)0x18) @@ -264,6 +265,8 @@ #define SCU_TASK_DONE_REG_ERR ((u32)0x2E) #define SCU_TASK_DONE_SDB_ERR ((u32)0x2F) #define SCU_TASK_DONE_TASK_ABORT ((u32)0x30) +#define SCU_TASK_DONE_CMD_SDMA_ERR ((U32)0x32) +#define SCU_TASK_DONE_CMD_LL_ABORT_ERR ((U32)0x33) #define SCU_TASK_OPEN_REJECT_WRONG_DESTINATION ((u32)0x34) #define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1 ((u32)0x35) #define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2 ((u32)0x36) -- cgit v0.10.2 From b3824292cb93d4e45b87fe76d8774cbde9e43200 Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Wed, 23 Feb 2011 00:09:14 -0800 Subject: isci: fix for asserts during aborts/resets to SAS/SATA in APC mode Sending aborts/resets to SAS/SATA targets in APC mode eventually causes an assert in scic_sds_apc_agent_link_up(). We need to handle the hard reset case for apc mode ports. Signed-off-by: Piotr Sawicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index dd2cdd4..001472e 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -676,28 +676,40 @@ static void scic_sds_apc_agent_configure_ports( } /** - * - * @controller: This is the controller object that receives the link up + * scic_sds_apc_agent_link_up - handle apc link up events + * @scic: This is the controller object that receives the link up * notification. - * @port: This is the port object associated with the phy. If the is no + * @sci_port: This is the port object associated with the phy. If the is no * associated port this is an NULL. - * @phy: This is the phy object which has gone link up. + * @sci_phy: This is the phy object which has gone link up. * * This method handles the automatic port configuration for link up * notifications. Is it possible to get a link down notification from a phy * that has no assocoated port? */ -static void scic_sds_apc_agent_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *port, - struct scic_sds_phy *phy) +static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - BUG_ON(port != NULL); - - port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy)); + u8 phy_index = sci_phy->phy_index; - scic_sds_apc_agent_configure_ports(controller, port_agent, phy, true); + if (!sci_port) { + /* the phy is not the part of this port */ + port_agent->phy_ready_mask |= 1 << phy_index; + scic_sds_apc_agent_configure_ports(scic, port_agent, sci_phy, true); + } else { + /* the phy is already the part of the port */ + u32 port_state = sci_port->parent.state_machine.current_state_id; + + /* if the PORT'S state is resetting then the link up is from + * port hard reset in this case, we need to tell the port + * that link up is recieved + */ + BUG_ON(port_state != SCI_BASE_PORT_STATE_RESETTING); + port_agent->phy_ready_mask |= 1 << phy_index; + scic_sds_port_link_up(sci_port, sci_phy); + } } /** -- cgit v0.10.2 From f7885c8490717b010115d6413b339702c64d8a3b Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 22 Feb 2011 16:39:32 -0700 Subject: isci: Removed special macros that does 64bit address math These macros are not necessary. We can do 64bit math directly. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_util.h b/drivers/scsi/isci/core/sci_util.h index 8f2ba35..9748c76 100644 --- a/drivers/scsi/isci/core/sci_util.h +++ b/drivers/scsi/isci/core/sci_util.h @@ -85,45 +85,6 @@ #define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \ ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) - -/** - * sci_physical_address_add() - - * - * This macro simply performs addition on an dma_addr_t type. The - * lower u32 value is "clipped" or "wrapped" back through 0. When this occurs - * the upper 32-bits are incremented by 1. - */ -#define sci_physical_address_add(physical_address, value) \ - { \ - u32 lower = lower_32_bits((physical_address)); \ - u32 upper = upper_32_bits((physical_address)); \ - \ - if (lower + (value) < lower) \ - upper += 1; \ - \ - lower += (value); \ - sci_cb_make_physical_address(physical_address, upper, lower); \ - } - -/** - * sci_physical_address_subtract() - - * - * This macro simply performs subtraction on an dma_addr_t type. The - * lower u32 value is "clipped" or "wrapped" back through 0. When this occurs - * the upper 32-bits are decremented by 1. - */ -#define sci_physical_address_subtract(physical_address, value) \ - { \ - u32 lower = lower_32_bits((physical_address)); \ - u32 upper = upper_32_bits((physical_address)); \ - \ - if (lower - (value) > lower) \ - upper -= 1; \ - \ - lower -= (value); \ - sci_cb_make_physical_address(physical_address, upper, lower); \ - } - /** * scic_word_copy_with_swap() - Copy the data from source to destination and * swap the bytes during the copy. diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c index 7ca2f17..7274812 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c @@ -109,7 +109,7 @@ void scic_sds_unsolicited_frame_control_set_address_table_count( static void scic_sds_unsolicited_frame_control_construct_frames( struct scic_sds_unsolicited_frame_control *uf_control, dma_addr_t uf_buffer_phys_address, - unsigned long uf_buffer_virt_address, + void *uf_buffer_virt_address, u32 unused_uf_header_entries, u32 used_uf_header_entries) { @@ -118,7 +118,8 @@ static void scic_sds_unsolicited_frame_control_construct_frames( /* * Program the unused buffers into the UF address table and the - * controller's array of UFs. */ + * controller's array of UFs. + */ for (index = 0; index < unused_uf_header_entries; index++) { uf = &uf_control->buffers.array[index]; @@ -132,7 +133,8 @@ static void scic_sds_unsolicited_frame_control_construct_frames( /* * Program the actual used UF buffers into the UF address table and - * the controller's array of UFs. */ + * the controller's array of UFs. + */ for (index = unused_uf_header_entries; index < unused_uf_header_entries + used_uf_header_entries; index++) { @@ -140,17 +142,17 @@ static void scic_sds_unsolicited_frame_control_construct_frames( uf_control->address_table.array[index] = uf_buffer_phys_address; - uf->buffer = (void *)uf_buffer_virt_address; + uf->buffer = uf_buffer_virt_address; uf->header = &uf_control->headers.array[index]; uf->state = UNSOLICITED_FRAME_EMPTY; /* - * Increment the address of the physical and virtual memory pointers - * Everything is aligned on 1k boundary with an increment of 1k */ + * Increment the address of the physical and virtual memory + * pointers. Everything is aligned on 1k boundary with an + * increment of 1k. + */ uf_buffer_virt_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; - sci_physical_address_add( - uf_buffer_phys_address, SCU_UNSOLICITED_FRAME_BUFFER_SIZE - ); + uf_buffer_phys_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; } } @@ -177,6 +179,7 @@ void scic_sds_unsolicited_frame_control_construct( u32 unused_uf_header_bytes; u32 used_uf_header_bytes; dma_addr_t uf_buffer_phys_address; + void *uf_buffer_virt_address; /* * Prepare all of the memory sizes for the UF headers, UF address @@ -193,9 +196,11 @@ void scic_sds_unsolicited_frame_control_construct( /* * The Unsolicited Frame buffers are set at the start of the UF - * memory descriptor entry. The headers and address table will be - * placed after the buffers. */ + * memory descriptor entry. The headers and address table will be + * placed after the buffers. + */ uf_buffer_phys_address = mde->physical_address; + uf_buffer_virt_address = mde->virtual_address; /* * Program the location of the UF header table into the SCU. @@ -205,34 +210,34 @@ void scic_sds_unsolicited_frame_control_construct( * - Program unused header entries to overlap with the last * unsolicited frame. The silicon will never DMA to these unused * headers, since we program the UF address table pointers to - * NULL. */ - uf_control->headers.physical_address = uf_buffer_phys_address; - sci_physical_address_add( - uf_control->headers.physical_address, used_uf_buffer_bytes); - sci_physical_address_subtract( - uf_control->headers.physical_address, unused_uf_header_bytes); - uf_control->headers.array - = (struct scu_unsolicited_frame_header *) - scic_cb_get_virtual_address( - controller, uf_control->headers.physical_address - ); + * NULL. + */ + uf_control->headers.physical_address = + uf_buffer_phys_address + + used_uf_buffer_bytes - + unused_uf_header_bytes; + + uf_control->headers.array = + uf_buffer_virt_address + + used_uf_buffer_bytes - + unused_uf_header_bytes; /* * Program the location of the UF address table into the SCU. * Notes: * - The address must align on a 64-bit boundary. Guaranteed to be on 64 * byte boundary already due to above programming headers being on a - * 64-bit boundary and headers are on a 64-bytes in size. */ - uf_control->address_table.physical_address = uf_buffer_phys_address; - sci_physical_address_add( - uf_control->address_table.physical_address, used_uf_buffer_bytes); - sci_physical_address_add( - uf_control->address_table.physical_address, used_uf_header_bytes); - uf_control->address_table.array - = (dma_addr_t *) - scic_cb_get_virtual_address( - controller, uf_control->address_table.physical_address - ); + * 64-bit boundary and headers are on a 64-bytes in size. + */ + uf_control->address_table.physical_address = + uf_buffer_phys_address + + used_uf_buffer_bytes + + used_uf_header_bytes; + + uf_control->address_table.array = + uf_buffer_virt_address + + used_uf_buffer_bytes + + used_uf_header_bytes; uf_control->get = 0; @@ -250,7 +255,7 @@ void scic_sds_unsolicited_frame_control_construct( scic_sds_unsolicited_frame_control_construct_frames( uf_control, uf_buffer_phys_address, - (unsigned long)mde->virtual_address, + mde->virtual_address, unused_uf_header_entries, used_uf_header_entries ); -- cgit v0.10.2 From 103a00c200ab3bb9e598923eb7ba3354fcb3de8d Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 23 Feb 2011 15:57:24 -0800 Subject: isci: Make the driver copy data directly from and to sg for PIO We can copy the data directly to and from sg for SATA PIO read operations. There is no reason to involve the hardware SGL. In the process we also need to kmap the sg because we don't know where that can come from. We also do to not call phys_to_virt(). The driver already has the information. We can just calculcate the appropriate offets. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c index 5cdd96f..03f919f 100644 --- a/drivers/scsi/isci/core/sci_util.c +++ b/drivers/scsi/isci/core/sci_util.c @@ -53,7 +53,9 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include "sci_util.h" +#include "sci_environment.h" void scic_word_copy_with_swap( u32 *destination, @@ -68,3 +70,17 @@ void scic_word_copy_with_swap( } } +void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) +{ + struct isci_request *ireq = sci_object_get_association(sci_req); + dma_addr_t offset; + + BUG_ON(phys_addr < ireq->request_daddr); + + offset = phys_addr - ireq->request_daddr; + + BUG_ON(offset >= ireq->request_alloc_size); + + return (char *)ireq + offset; +} + diff --git a/drivers/scsi/isci/core/sci_util.h b/drivers/scsi/isci/core/sci_util.h index 9748c76..50c272e 100644 --- a/drivers/scsi/isci/core/sci_util.h +++ b/drivers/scsi/isci/core/sci_util.h @@ -57,6 +57,7 @@ #define _SCI_UTIL_H_ #include +#include "scic_sds_request.h" /** * SCIC_SWAP_DWORD() - @@ -96,9 +97,9 @@ * byte swap. * */ -void scic_word_copy_with_swap( - u32 *destination, - u32 *source, - u32 word_count); +void scic_word_copy_with_swap(u32 *destination, u32 *source, u32 word_count); + +void *scic_request_get_virt_addr(struct scic_sds_request *sds_request, + dma_addr_t phys_addr); #endif /* _SCI_UTIL_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 2bd47f4..9fa45cd0 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -100,15 +100,6 @@ * **************************************************************************** */ /** - * scic_sds_request_get_user_request() - - * - * This is a helper macro to return the os handle for this request object. - */ -#define scic_sds_request_get_user_request(request) \ - ((request)->user_request) - - -/** * scic_ssp_io_request_get_object_size() - * * This macro returns the sizeof memory required to store the an SSP IO diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 0691a75..60337e6 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -400,6 +400,14 @@ extern const struct scic_sds_io_request_state_handler scic_sds_smp_request_start (scu_sge).address_modifier = 0; \ } +/** + * scic_sds_request_get_user_request() - + * + * This is a helper macro to return the os handle for this request object. + */ +#define scic_sds_request_get_user_request(request) \ + ((request)->user_request) + /* * ***************************************************************************** * * CORE REQUEST PROTOTYPES diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 6d280c0..10f160e 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -486,45 +486,34 @@ void *scic_stp_io_request_get_d2h_reg_address( * - if there are more SGL element pairs - advance to the next pair and return * element A struct scu_sgl_element* */ -struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl( - struct scic_sds_stp_request *this_request - ) { +struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) +{ struct scu_sgl_element *current_sgl; + struct scic_sds_request *sci_req = &stp_req->parent; + struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; - if (this_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - if ( - (this_request->type.pio.request_current.sgl_pair->B.address_lower == 0) - && (this_request->type.pio.request_current.sgl_pair->B.address_upper == 0) - ) { + if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + if (pio_sgl->sgl_pair->B.address_lower == 0 && + pio_sgl->sgl_pair->B.address_upper == 0) { current_sgl = NULL; } else { - this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_B; - current_sgl = &(this_request->type.pio.request_current.sgl_pair->B); + pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B; + current_sgl = &pio_sgl->sgl_pair->B; } } else { - if ( - (this_request->type.pio.request_current.sgl_pair->next_pair_lower == 0) - && (this_request->type.pio.request_current.sgl_pair->next_pair_upper == 0) - ) { + if (pio_sgl->sgl_pair->next_pair_lower == 0 && + pio_sgl->sgl_pair->next_pair_upper == 0) { current_sgl = NULL; } else { - dma_addr_t physical_address; - - sci_cb_make_physical_address( - physical_address, - this_request->type.pio.request_current.sgl_pair->next_pair_upper, - this_request->type.pio.request_current.sgl_pair->next_pair_lower - ); + u64 phys_addr; - this_request->type.pio.request_current.sgl_pair = - (struct scu_sgl_element_pair *)scic_cb_get_virtual_address( - this_request->parent.owning_controller, - physical_address - ); + phys_addr = pio_sgl->sgl_pair->next_pair_upper; + phys_addr <<= 32; + phys_addr |= pio_sgl->sgl_pair->next_pair_lower; - this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; - - current_sgl = &(this_request->type.pio.request_current.sgl_pair->A); + pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr); + pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A; + current_sgl = &pio_sgl->sgl_pair->A; } } @@ -882,82 +871,51 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data( /** * - * @this_request: The request that is used for the SGL processing. + * @stp_request: The request that is used for the SGL processing. * @data_buffer: The buffer of data to be copied. * @length: The length of the data transfer. * * Copy the data from the buffer for the length specified to the IO reqeust SGL * specified data region. enum sci_status */ -static enum sci_status scic_sds_stp_request_pio_data_in_copy_data_buffer( - struct scic_sds_stp_request *this_request, - u8 *data_buffer, - u32 length) +static enum sci_status +scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req, + u8 *data_buf, u32 len) { - enum sci_status status; - struct scu_sgl_element *current_sgl; - u32 sgl_offset; - u32 data_offset; - u8 *source_address; - u8 *destination_address; - u32 copy_length; - - /* Initial setup to get the current working SGL and the offset within the buffer */ - current_sgl = - (this_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) ? - &(this_request->type.pio.request_current.sgl_pair->A) : - &(this_request->type.pio.request_current.sgl_pair->B); - - sgl_offset = this_request->type.pio.request_current.sgl_offset; - - source_address = data_buffer; - data_offset = 0; - - status = SCI_SUCCESS; - - /* While we are still doing Ok and there is more data to transfer */ - while ( - (length > 0) - && (status == SCI_SUCCESS) - ) { - if (current_sgl->length == sgl_offset) { - /* This SGL has been exauhasted so we need to get the next SGL */ - current_sgl = scic_sds_stp_request_pio_get_next_sgl(this_request); - - if (current_sgl == NULL) - status = SCI_FAILURE; - else - sgl_offset = 0; - } else { - dma_addr_t physical_address; - - sci_cb_make_physical_address( - physical_address, - current_sgl->address_upper, - current_sgl->address_lower - ); - - destination_address = (u8 *)scic_cb_get_virtual_address( - this_request->parent.owning_controller, - physical_address - ); - - source_address += data_offset; - destination_address += sgl_offset; - - copy_length = min(length, current_sgl->length - sgl_offset); - - memcpy(destination_address, source_address, copy_length); - - length -= copy_length; - sgl_offset += copy_length; - data_offset += copy_length; + struct scic_sds_request *sci_req; + struct isci_request *ireq; + u8 *src_addr; + int copy_len; + struct sas_task *task; + struct scatterlist *sg; + void *kaddr; + int total_len = len; + + sci_req = &stp_req->parent; + ireq = scic_sds_request_get_user_request(sci_req); + task = isci_request_access_task(ireq); + src_addr = data_buf; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (total_len > 0) { + struct page *page = sg_page(sg); + + copy_len = min_t(int, total_len, sg_dma_len(sg)); + kaddr = kmap_atomic(page, KM_IRQ0); + memcpy(kaddr + sg->offset, src_addr, copy_len); + kunmap_atomic(kaddr, KM_IRQ0); + total_len -= copy_len; + src_addr += copy_len; + sg = sg_next(sg); } + } else { + BUG_ON(task->total_xfer_len < total_len); + memcpy(task->scatter, src_addr, total_len); } - this_request->type.pio.request_current.sgl_offset = sgl_offset; - - return status; + return SCI_SUCCESS; } /** diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index 4a4c68a..c950bb3 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -116,7 +116,7 @@ struct scic_sds_stp_request { */ u8 sat_protocol; - struct { + struct scic_sds_request_pio_sgl { struct scu_sgl_element_pair *sgl_pair; u8 sgl_set; u32 sgl_offset; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 6c79b29..225764f 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -84,6 +84,7 @@ #include "host.h" #include "timers.h" #include "sci_status.h" +#include "request.h" extern struct kmem_cache *isci_kmem_cache; extern struct isci_firmware *isci_firmware; -- cgit v0.10.2 From 6389a77596f36cf04ad8b1c7d43ec1d6cdfe89cb Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 23 Feb 2011 15:57:27 -0800 Subject: isci: have the driver use native SG calls and DMA-API Remove abstraction for SG building and get rid of callbacks for getting DMA memory mapping. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c index 03f919f..cb3e9f7 100644 --- a/drivers/scsi/isci/core/sci_util.c +++ b/drivers/scsi/isci/core/sci_util.c @@ -84,3 +84,18 @@ void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t ph return (char *)ireq + offset; } +dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sds_request, + void *virt_addr) +{ + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sds_request); + + char *requested_addr = (char *)virt_addr; + char *base_addr = (char *)isci_request; + + BUG_ON(requested_addr < base_addr); + BUG_ON((requested_addr - base_addr) >= + isci_request->request_alloc_size); + + return isci_request->request_daddr + (requested_addr - base_addr); +} diff --git a/drivers/scsi/isci/core/sci_util.h b/drivers/scsi/isci/core/sci_util.h index 50c272e..b6f43e2 100644 --- a/drivers/scsi/isci/core/sci_util.h +++ b/drivers/scsi/isci/core/sci_util.h @@ -102,4 +102,7 @@ void scic_word_copy_with_swap(u32 *destination, u32 *source, u32 word_count); void *scic_request_get_virt_addr(struct scic_sds_request *sds_request, dma_addr_t phys_addr); +dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sds_request, + void *virt_addr); + #endif /* _SCI_UTIL_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 9fa45cd0..3bad0bc 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -259,56 +259,70 @@ static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( * the Scatter-Gather List. * */ -void scic_sds_request_build_sgl( - struct scic_sds_request *this_request) +void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) { - void *os_sge; - void *os_handle; - dma_addr_t physical_address; - u32 sgl_pair_index = 0; - struct scu_sgl_element_pair *scu_sgl_list = NULL; - struct scu_sgl_element_pair *previous_pair = NULL; - - os_handle = scic_sds_request_get_user_request(this_request); - scic_cb_io_request_get_next_sge(os_handle, NULL, &os_sge); - - while (os_sge != NULL) { - scu_sgl_list = - scic_sds_request_get_sgl_element_pair(this_request, sgl_pair_index); - - SCU_SGL_COPY(os_handle, scu_sgl_list->A, os_sge); - - scic_cb_io_request_get_next_sge(os_handle, os_sge, &os_sge); - - if (os_sge != NULL) { - SCU_SGL_COPY(os_handle, scu_sgl_list->B, os_sge); - - scic_cb_io_request_get_next_sge(os_handle, os_sge, &os_sge); - } else { - SCU_SGL_ZERO(scu_sgl_list->B); + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sds_request); + struct isci_host *isci_host = isci_request->isci_host; + struct sas_task *task = isci_request_access_task(isci_request); + struct scatterlist *sg = NULL; + dma_addr_t dma_addr; + u32 sg_idx = 0; + struct scu_sgl_element_pair *scu_sg = NULL; + struct scu_sgl_element_pair *prev_sg = NULL; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (sg) { + scu_sg = scic_sds_request_get_sgl_element_pair( + sds_request, + sg_idx); + + SCU_SGL_COPY(scu_sg->A, sg); + + sg = sg_next(sg); + + if (sg) { + SCU_SGL_COPY(scu_sg->B, sg); + sg = sg_next(sg); + } else + SCU_SGL_ZERO(scu_sg->B); + + if (prev_sg) { + dma_addr = + scic_io_request_get_dma_addr( + sds_request, + scu_sg); + + prev_sg->next_pair_upper = + upper_32_bits(dma_addr); + prev_sg->next_pair_lower = + lower_32_bits(dma_addr); + } + + prev_sg = scu_sg; + sg_idx++; } + } else { /* handle when no sg */ + scu_sg = scic_sds_request_get_sgl_element_pair(sds_request, + sg_idx); - if (previous_pair != NULL) { - scic_cb_io_request_get_physical_address( - scic_sds_request_get_controller(this_request), - this_request, - scu_sgl_list, - &physical_address - ); + dma_addr = dma_map_single(&isci_host->pdev->dev, + task->scatter, + task->total_xfer_len, + task->data_dir); - previous_pair->next_pair_upper = - upper_32_bits(physical_address); - previous_pair->next_pair_lower = - lower_32_bits(physical_address); - } + isci_request->zero_scatter_daddr = dma_addr; - previous_pair = scu_sgl_list; - sgl_pair_index++; + scu_sg->A.length = task->total_xfer_len; + scu_sg->A.address_upper = upper_32_bits(dma_addr); + scu_sg->A.address_lower = lower_32_bits(dma_addr); } - if (scu_sgl_list != NULL) { - scu_sgl_list->next_pair_upper = 0; - scu_sgl_list->next_pair_lower = 0; + if (scu_sg) { + scu_sg->next_pair_upper = 0; + scu_sg->next_pair_lower = 0; } } @@ -473,17 +487,17 @@ static void scic_sds_task_request_build_ssp_task_iu( * */ static void scu_ssp_reqeust_construct_task_context( - struct scic_sds_request *this_request, + struct scic_sds_request *sds_request, struct scu_task_context *task_context) { - dma_addr_t physical_address; - struct scic_sds_controller *owning_controller; + dma_addr_t dma_addr; + struct scic_sds_controller *controller; struct scic_sds_remote_device *target_device; struct scic_sds_port *target_port; - owning_controller = scic_sds_request_get_controller(this_request); - target_device = scic_sds_request_get_device(this_request); - target_port = scic_sds_request_get_port(this_request); + controller = scic_sds_request_get_controller(sds_request); + target_device = scic_sds_request_get_device(sds_request); + target_port = scic_sds_request_get_port(sds_request); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -492,7 +506,7 @@ static void scu_ssp_reqeust_construct_task_context( task_context->connection_rate = scic_remote_device_get_connection_rate(target_device); task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(owning_controller); + scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = scic_sds_port_get_index(target_port); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; @@ -500,7 +514,7 @@ static void scu_ssp_reqeust_construct_task_context( task_context->context_type = SCU_TASK_CONTEXT_TYPE; task_context->remote_node_index = - scic_sds_remote_device_get_index(this_request->target_device); + scic_sds_remote_device_get_index(sds_request->target_device); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -515,61 +529,55 @@ static void scu_ssp_reqeust_construct_task_context( /* task_context->type.ssp.tag = this_request->io_tag; */ task_context->task_phase = 0x01; - if (this_request->was_tag_assigned_by_user) { - /* Build the task context now since we have already read the data */ - this_request->post_context = ( - SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC - | ( - scic_sds_controller_get_protocol_engine_group(owning_controller) - << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT - ) - | ( - scic_sds_port_get_index(target_port) - << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT - ) - | scic_sds_io_tag_get_index(this_request->io_tag) - ); + if (sds_request->was_tag_assigned_by_user) { + /* + * Build the task context now since we have already read + * the data + */ + sds_request->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + scic_sds_io_tag_get_index(sds_request->io_tag)); } else { - /* Build the task context now since we have already read the data */ - this_request->post_context = ( - SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC - | ( - scic_sds_controller_get_protocol_engine_group(owning_controller) - << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT - ) - | ( - scic_sds_port_get_index(target_port) - << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT - ) - /* This is not assigned because we have to wait until we get a TCi */ - ); + /* + * Build the task context now since we have already read + * the data + * + * I/O tag index is not assigned because we have to wait + * until we get a TCi + */ + sds_request->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + owning_controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); } - /* Copy the physical address for the command buffer to the SCU Task Context */ - scic_cb_io_request_get_physical_address( - scic_sds_request_get_controller(this_request), - this_request, - this_request->command_buffer, - &physical_address - ); + /* + * Copy the physical address for the command buffer to the + * SCU Task Context + */ + dma_addr = scic_io_request_get_dma_addr(sds_request, + sds_request->command_buffer); - task_context->command_iu_upper = - upper_32_bits(physical_address); - task_context->command_iu_lower = - lower_32_bits(physical_address); + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); - /* Copy the physical address for the response buffer to the SCU Task Context */ - scic_cb_io_request_get_physical_address( - scic_sds_request_get_controller(this_request), - this_request, - this_request->response_buffer, - &physical_address - ); + /* + * Copy the physical address for the response buffer to the + * SCU Task Context + */ + dma_addr = scic_io_request_get_dma_addr(sds_request, + sds_request->response_buffer); - task_context->response_iu_upper = - upper_32_bits(physical_address); - task_context->response_iu_lower = - lower_32_bits(physical_address); + task_context->response_iu_upper = upper_32_bits(dma_addr); + task_context->response_iu_lower = lower_32_bits(dma_addr); } /** diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 60337e6..19b6fee 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -389,14 +389,13 @@ extern const struct scic_sds_io_request_state_handler scic_sds_smp_request_start * This macro copys the SGL Element data from the host os to the hardware SGL * elment data */ -#define SCU_SGL_COPY(os_handle, scu_sge, os_sge) \ +#define SCU_SGL_COPY(scu_sge, os_sge) \ { \ - (scu_sge).length = \ - scic_cb_sge_get_length_field(os_handle, os_sge); \ + (scu_sge).length = sg_dma_len(sg); \ (scu_sge).address_upper = \ - upper_32_bits(scic_cb_sge_get_address_field(os_handle, os_sge)); \ + upper_32_bits(sg_dma_address(sg)); \ (scu_sge).address_lower = \ - lower_32_bits(scic_cb_sge_get_address_field(os_handle, os_sge)); \ + lower_32_bits(sg_dma_address(sg)); \ (scu_sge).address_modifier = 0; \ } diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 949d23e..85c8906 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -234,37 +234,36 @@ enum sci_status scic_io_request_construct_smp( * */ static void scu_smp_request_construct_task_context( - struct scic_sds_request *this_request, + struct scic_sds_request *sds_request, struct smp_request *smp_request) { - dma_addr_t physical_address; - struct scic_sds_controller *owning_controller; + dma_addr_t dma_addr; + struct scic_sds_controller *controller; struct scic_sds_remote_device *target_device; struct scic_sds_port *target_port; struct scu_task_context *task_context; /* byte swap the smp request. */ - scic_word_copy_with_swap( - this_request->command_buffer, - (u32 *)smp_request, - sizeof(struct smp_request) / sizeof(u32) - ); + scic_word_copy_with_swap(sds_request->command_buffer, + (u32 *)smp_request, + sizeof(struct smp_request) / sizeof(u32)); - task_context = scic_sds_request_get_task_context(this_request); + task_context = scic_sds_request_get_task_context(sds_request); - owning_controller = scic_sds_request_get_controller(this_request); - target_device = scic_sds_request_get_device(this_request); - target_port = scic_sds_request_get_port(this_request); + controller = scic_sds_request_get_controller(sds_request); + target_device = scic_sds_request_get_device(sds_request); + target_port = scic_sds_request_get_port(sds_request); /* * Fill in the TC with the its required data - * 00h */ + * 00h + */ task_context->priority = 0; task_context->initiator_request = 1; task_context->connection_rate = scic_remote_device_get_connection_rate(target_device); task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(owning_controller); + scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = scic_sds_port_get_index(target_port); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; @@ -273,7 +272,8 @@ static void scu_smp_request_construct_task_context( task_context->context_type = SCU_TASK_CONTEXT_TYPE; /* 04h */ - task_context->remote_node_index = this_request->target_device->rnc->remote_node_index; + task_context->remote_node_index = + sds_request->target_device->rnc->remote_node_index; task_context->command_code = 0; task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; @@ -289,7 +289,8 @@ static void scu_smp_request_construct_task_context( task_context->address_modifier = 0; /* 10h */ - task_context->ssp_command_iu_length = smp_request->header.request_length; + task_context->ssp_command_iu_length = + smp_request->header.request_length; /* 14h */ task_context->transfer_length_bytes = 0; @@ -298,59 +299,57 @@ static void scu_smp_request_construct_task_context( * 18h ~ 30h, protocol specific * since commandIU has been build by framework at this point, we just * copy the frist DWord from command IU to this location. */ - memcpy((void *)(&task_context->type.smp), this_request->command_buffer, sizeof(u32)); + memcpy((void *)(&task_context->type.smp), + sds_request->command_buffer, + sizeof(u32)); /* * 40h - * "For SMP you could program it to zero. We would prefer that way so that - * done code will be consistent." - Venki */ + * "For SMP you could program it to zero. We would prefer that way + * so that done code will be consistent." - Venki + */ task_context->task_phase = 0; - if (this_request->was_tag_assigned_by_user) { - /* Build the task context now since we have already read the data */ - this_request->post_context = ( - SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC - | ( - scic_sds_controller_get_protocol_engine_group(owning_controller) - << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT - ) - | ( - scic_sds_port_get_index(target_port) - << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT - ) - | scic_sds_io_tag_get_index(this_request->io_tag) - ); + if (sds_request->was_tag_assigned_by_user) { + /* + * Build the task context now since we have already read + * the data + */ + sds_request->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + scic_sds_io_tag_get_index(sds_request->io_tag)); } else { - /* Build the task context now since we have already read the data */ - this_request->post_context = ( - SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC - | ( - scic_sds_controller_get_protocol_engine_group(owning_controller) - << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT - ) - | ( - scic_sds_port_get_index(target_port) - << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT - ) - /* This is not assigned because we have to wait until we get a TCi */ - ); + /* + * Build the task context now since we have already read + * the data. + * I/O tag index is not assigned because we have to wait + * until we get a TCi. + */ + sds_request->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); } /* - * Copy the physical address for the command buffer to the SCU Task Context - * command buffer should not contain command header. */ - scic_cb_io_request_get_physical_address( - scic_sds_request_get_controller(this_request), - this_request, - ((char *)(this_request->command_buffer) + sizeof(u32)), - &physical_address - ); - - task_context->command_iu_upper = - upper_32_bits(physical_address); - task_context->command_iu_lower = - lower_32_bits(physical_address); - + * Copy the physical address for the command buffer to the SCU Task + * Context command buffer should not contain command header. + */ + dma_addr = scic_io_request_get_dma_addr(sds_request, + (char *) + (sds_request->command_buffer) + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); /* SMP response comes as UF, so no need to set response IU address. */ task_context->response_iu_upper = 0; diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c index f52a8e3..97dc9bf 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c @@ -253,30 +253,26 @@ enum sci_status scic_sds_stp_packet_request_process_status_fis( * */ void scic_sds_stp_packet_internal_request_sense_build_sgl( - struct scic_sds_request *this_request) + struct scic_sds_request *sds_request) { void *sge; struct scu_sgl_element_pair *scu_sgl_list = NULL; struct scu_task_context *task_context; - dma_addr_t physical_address; + dma_addr_t dma_addr; struct sci_ssp_response_iu *rsp_iu = - (struct sci_ssp_response_iu *)this_request->response_buffer; + (struct sci_ssp_response_iu *)sds_request->response_buffer; sge = (void *)&rsp_iu->data[0]; - task_context = (struct scu_task_context *)this_request->task_context_buffer; + task_context = + (struct scu_task_context *)sds_request->task_context_buffer; scu_sgl_list = &task_context->sgl_pair_ab; - scic_cb_io_request_get_physical_address( - scic_sds_request_get_controller(this_request), - this_request, - ((char *)sge), - &physical_address - ); + dma_addr = scic_io_request_get_dma_addr(sds_request, sge); - scu_sgl_list->A.address_upper = sci_cb_physical_address_upper(physical_address); - scu_sgl_list->A.address_lower = sci_cb_physical_address_lower(physical_address); + scu_sgl_list->A.address_upper = upper_32_bits(dma_addr); + scu_sgl_list->A.address_lower = lower_32_bits(dma_addr); scu_sgl_list->A.length = task_context->transfer_length_bytes; scu_sgl_list->A.address_modifier = 0; diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 10f160e..0a07207 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -175,17 +175,17 @@ void scic_sds_stp_request_assign_buffers( * determine what is common for SSP/SMP/STP task context structures. */ static void scu_sata_reqeust_construct_task_context( - struct scic_sds_request *this_request, + struct scic_sds_request *sds_request, struct scu_task_context *task_context) { - dma_addr_t physical_address; - struct scic_sds_controller *owning_controller; + dma_addr_t dma_addr; + struct scic_sds_controller *controller; struct scic_sds_remote_device *target_device; struct scic_sds_port *target_port; - owning_controller = scic_sds_request_get_controller(this_request); - target_device = scic_sds_request_get_device(this_request); - target_port = scic_sds_request_get_port(this_request); + controller = scic_sds_request_get_controller(sds_request); + target_device = scic_sds_request_get_device(sds_request); + target_port = scic_sds_request_get_port(sds_request); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -194,7 +194,7 @@ static void scu_sata_reqeust_construct_task_context( task_context->connection_rate = scic_remote_device_get_connection_rate(target_device); task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(owning_controller); + scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = scic_sds_port_get_index(target_port); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; @@ -202,7 +202,7 @@ static void scu_sata_reqeust_construct_task_context( task_context->context_type = SCU_TASK_CONTEXT_TYPE; task_context->remote_node_index = - scic_sds_remote_device_get_index(this_request->target_device); + scic_sds_remote_device_get_index(sds_request->target_device); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -219,53 +219,50 @@ static void scu_sata_reqeust_construct_task_context( (sizeof(struct sata_fis_reg_h2d) - sizeof(u32)) / sizeof(u32); /* Set the first word of the H2D REG FIS */ - task_context->type.words[0] = *(u32 *)this_request->command_buffer; - - if (this_request->was_tag_assigned_by_user) { - /* Build the task context now since we have already read the data */ - this_request->post_context = ( - SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC - | ( - scic_sds_controller_get_protocol_engine_group(owning_controller) - << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT - ) - | ( - scic_sds_port_get_index(target_port) - << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT - ) - | scic_sds_io_tag_get_index(this_request->io_tag) - ); + task_context->type.words[0] = *(u32 *)sds_request->command_buffer; + + if (sds_request->was_tag_assigned_by_user) { + /* + * Build the task context now since we have already read + * the data + */ + sds_request->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + scic_sds_io_tag_get_index(sds_request->io_tag)); } else { - /* Build the task context now since we have already read the data */ - this_request->post_context = ( - SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC - | ( - scic_sds_controller_get_protocol_engine_group(owning_controller) - << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT - ) - | ( - scic_sds_port_get_index(target_port) - << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT - ) - /* This is not assigned because we have to wait until we get a TCi */ - ); + /* + * Build the task context now since we have already read + * the data. + * I/O tag index is not assigned because we have to wait + * until we get a TCi. + */ + sds_request->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); } /* - * Copy the physical address for the command buffer to the SCU Task Context - * We must offset the command buffer by 4 bytes because the first 4 bytes are - * transfered in the body of the TC */ - scic_cb_io_request_get_physical_address( - scic_sds_request_get_controller(this_request), - this_request, - ((char *)this_request->command_buffer) + sizeof(u32), - &physical_address - ); - - task_context->command_iu_upper = - upper_32_bits(physical_address); - task_context->command_iu_lower = - lower_32_bits(physical_address); + * Copy the physical address for the command buffer to the SCU Task + * Context. We must offset the command buffer by 4 bytes because the + * first 4 bytes are transfered in the body of the TC. + */ + dma_addr = + scic_io_request_get_dma_addr(sds_request, + (char *)sds_request-> + command_buffer + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); /* SATA Requests do not have a response buffer */ task_context->response_iu_upper = 0; -- cgit v0.10.2 From a1914059f1434b0cdf113ebf16df627fd85689d0 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 23 Feb 2011 15:57:30 -0800 Subject: isci: Change event notify calls from scic_cb_* to isci_event_* Renaming the callbacks to apparopriate event notify calls for the LLDD. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index e8d09fd..b0f9221d 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -256,7 +256,7 @@ static void scic_sds_controller_phy_startup_timeout_handler( void scic_sds_controller_initialize_phy_startup( struct scic_sds_controller *this_controller) { - this_controller->phy_startup_timer = scic_cb_timer_create( + this_controller->phy_startup_timer = isci_event_timer_create( this_controller, scic_sds_controller_phy_startup_timeout_handler, this_controller @@ -275,7 +275,7 @@ void scic_sds_controller_initialize_phy_startup( void scic_sds_controller_initialize_power_control( struct scic_sds_controller *this_controller) { - this_controller->power_control.timer = scic_cb_timer_create( + this_controller->power_control.timer = isci_event_timer_create( this_controller, scic_sds_controller_power_control_timer_handler, this_controller @@ -734,7 +734,7 @@ static void scic_sds_controller_transition_to_ready( SCI_BASE_CONTROLLER_STATE_READY ); - scic_cb_controller_start_complete(this_controller, status); + isci_event_controller_start_complete(this_controller, status); } } @@ -757,7 +757,7 @@ void scic_sds_controller_timeout_handler( sci_base_state_machine_change_state( scic_sds_controller_get_base_state_machine(scic), SCI_BASE_CONTROLLER_STATE_FAILED); - scic_cb_controller_stop_complete(scic, SCI_FAILURE_TIMEOUT); + isci_event_controller_stop_complete(scic, SCI_FAILURE_TIMEOUT); } else /* / @todo Now what do we want to do in this case? */ dev_err(scic_to_dev(scic), "%s: Controller timer fired when controller was not " @@ -823,7 +823,7 @@ enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) static void scic_sds_controller_phy_timer_start( struct scic_sds_controller *this_controller) { - scic_cb_timer_start( + isci_event_timer_start( this_controller, this_controller->phy_startup_timer, SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT @@ -840,7 +840,7 @@ static void scic_sds_controller_phy_timer_start( void scic_sds_controller_phy_timer_stop( struct scic_sds_controller *this_controller) { - scic_cb_timer_stop( + isci_event_timer_stop( this_controller, this_controller->phy_startup_timer ); @@ -1041,7 +1041,7 @@ enum sci_status scic_sds_controller_stop_devices( static void scic_sds_controller_power_control_timer_start( struct scic_sds_controller *this_controller) { - scic_cb_timer_start( + isci_event_timer_start( this_controller, this_controller->power_control.timer, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL ); @@ -2809,7 +2809,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler( SCI_BASE_CONTROLLER_STATE_INITIALIZING ); - this_controller->timeout_timer = scic_cb_timer_create( + this_controller->timeout_timer = isci_event_timer_create( this_controller, (void (*)(void *))scic_sds_controller_timeout_handler, (void (*)(void *))controller); @@ -3040,7 +3040,7 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( if (SCI_SUCCESS == result) { scic_sds_controller_start_next_phy(this_controller); - scic_cb_timer_start(this_controller, + isci_event_timer_start(this_controller, this_controller->timeout_timer, timeout); @@ -3130,7 +3130,7 @@ static enum sci_status scic_sds_controller_ready_state_stop_handler( this_controller = (struct scic_sds_controller *)controller; - scic_cb_timer_start(this_controller, + isci_event_timer_start(this_controller, this_controller->timeout_timer, timeout); @@ -3578,7 +3578,7 @@ static void scic_sds_controller_starting_state_exit( { struct scic_sds_controller *scic = (struct scic_sds_controller *)object; - scic_cb_timer_stop(scic, scic->timeout_timer); + isci_event_timer_stop(scic, scic->timeout_timer); } /** @@ -3660,7 +3660,7 @@ static void scic_sds_controller_stopping_state_exit( this_controller = (struct scic_sds_controller *)object; - scic_cb_timer_stop(this_controller, this_controller->timeout_timer); + isci_event_timer_stop(this_controller, this_controller->timeout_timer); } /** diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index e8d5be7..92a5d29 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -370,7 +370,7 @@ enum sci_status scic_sds_phy_initialize( struct scu_link_layer_registers __iomem *link_layer_registers) { /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = scic_cb_timer_create( + sci_phy->sata_timeout_timer = isci_event_timer_create( scic_sds_phy_get_controller(sci_phy), scic_sds_phy_sata_timeout, sci_phy @@ -1746,7 +1746,7 @@ static void scic_sds_phy_starting_await_sata_phy_substate_enter( this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN ); - scic_cb_timer_start( + isci_event_timer_start( scic_sds_phy_get_controller(this_phy), this_phy->sata_timeout_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT @@ -1768,7 +1768,7 @@ static void scic_sds_phy_starting_await_sata_phy_substate_exit( this_phy = (struct scic_sds_phy *)object; - scic_cb_timer_stop( + isci_event_timer_stop( scic_sds_phy_get_controller(this_phy), this_phy->sata_timeout_timer ); @@ -1793,7 +1793,7 @@ static void scic_sds_phy_starting_await_sata_speed_substate_enter( this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN ); - scic_cb_timer_start( + isci_event_timer_start( scic_sds_phy_get_controller(this_phy), this_phy->sata_timeout_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT @@ -1815,7 +1815,7 @@ static void scic_sds_phy_starting_await_sata_speed_substate_exit( this_phy = (struct scic_sds_phy *)object; - scic_cb_timer_stop( + isci_event_timer_stop( scic_sds_phy_get_controller(this_phy), this_phy->sata_timeout_timer ); @@ -1854,7 +1854,7 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter( * condition is cleared. */ scic_sds_phy_resume(this_phy); - scic_cb_timer_start( + isci_event_timer_start( scic_sds_phy_get_controller(this_phy), this_phy->sata_timeout_timer, SCIC_SDS_SIGNATURE_FIS_TIMEOUT @@ -1879,7 +1879,7 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( this_phy = (struct scic_sds_phy *)object; - scic_cb_timer_stop( + isci_event_timer_stop( scic_sds_phy_get_controller(this_phy), this_phy->sata_timeout_timer ); diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index b8acc23..f31e6dc 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -565,7 +565,7 @@ enum sci_status scic_sds_port_initialize( * the timer and start the state machine */ if (this_port->physical_port_index != SCI_MAX_PORTS) { /* / @todo should we create the timer at create time? */ - this_port->timer_handle = scic_cb_timer_create( + this_port->timer_handle = isci_event_timer_create( scic_sds_port_get_controller(this_port), scic_sds_port_timeout_handler, this_port @@ -727,7 +727,9 @@ void scic_sds_port_activate_phy( scic_sds_controller_clear_invalid_phy(controller, the_phy); if (do_notify_user == true) - scic_cb_port_link_up(this_port->owning_controller, this_port, the_phy); + isci_event_port_link_up(this_port->owning_controller, + this_port, + the_phy); } /** @@ -735,7 +737,8 @@ void scic_sds_port_activate_phy( * @this_port: This is the port on which the phy should be deactivated. * @the_phy: This is the specific phy that is no longer active in the port. * @do_notify_user: This parameter specifies whether to inform the user (via - * scic_cb_port_link_down()) as to the fact that a new phy as become ready. + * isci_event_port_link_down()) as to the fact that a new phy as become + * ready. * * This method will deactivate the supplied phy in the port. none */ @@ -752,7 +755,9 @@ void scic_sds_port_deactivate_phy( SCU_PCSPExCR_WRITE(this_port, the_phy->phy_index, the_phy->phy_index); if (do_notify_user == true) - scic_cb_port_link_down(this_port->owning_controller, this_port, the_phy); + isci_event_port_link_down(this_port->owning_controller, + this_port, + the_phy); } /** @@ -775,7 +780,7 @@ static void scic_sds_port_invalid_link_up( if ((controller->invalid_phy_mask & (1 << the_phy->phy_index)) == 0) { scic_sds_controller_set_invalid_phy(controller, the_phy); - scic_cb_port_invalid_link_up(controller, this_port, the_phy); + isci_event_port_invalid_link_up(controller, this_port, the_phy); } } @@ -933,7 +938,7 @@ static void scic_sds_port_timeout_handler(void *port) this_port); } else if (current_state == SCI_BASE_PORT_STATE_STOPPING) { /* if the port is still stopping then the stop has not completed */ - scic_cb_port_stop_complete( + isci_event_port_stop_complete( scic_sds_port_get_controller(this_port), port, SCI_FAILURE_TIMEOUT @@ -1030,7 +1035,7 @@ void scic_sds_port_broadcast_change_received( struct scic_sds_phy *this_phy) { /* notify the user. */ - scic_cb_port_bc_change_primitive_received( + isci_event_port_bc_change_primitive_received( this_port->owning_controller, this_port, this_phy ); } @@ -1259,7 +1264,7 @@ static enum sci_status scic_sds_port_ready_operational_substate_reset_handler( status = scic_sds_phy_reset(selected_phy); if (status == SCI_SUCCESS) { - scic_cb_timer_start( + isci_event_timer_start( scic_sds_port_get_controller(this_port), this_port->timer_handle, timeout @@ -1610,7 +1615,7 @@ static void scic_sds_port_ready_substate_operational_enter( this_port, SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL ); - scic_cb_port_ready( + isci_event_port_ready( scic_sds_port_get_controller(this_port), this_port ); @@ -1640,7 +1645,7 @@ static void scic_sds_port_ready_substate_operational_exit( { struct scic_sds_port *this_port = (struct scic_sds_port *)object; - scic_cb_port_not_ready( + isci_event_port_not_ready( scic_sds_port_get_controller(this_port), this_port, this_port->not_ready_reason @@ -1670,7 +1675,7 @@ static void scic_sds_port_ready_substate_configuring_enter( ); if (this_port->active_phy_mask == 0) { - scic_cb_port_not_ready( + isci_event_port_not_ready( scic_sds_port_get_controller(this_port), this_port, SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS @@ -2544,14 +2549,14 @@ static void scic_sds_port_ready_state_enter( SCI_BASE_PORT_STATE_RESETTING == this_port->parent.state_machine.previous_state_id ) { - scic_cb_port_hard_reset_complete( + isci_event_port_hard_reset_complete( scic_sds_port_get_controller(this_port), this_port, SCI_SUCCESS ); } else { /* Notify the caller that the port is not yet ready */ - scic_cb_port_not_ready( + isci_event_port_not_ready( scic_sds_port_get_controller(this_port), this_port, SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS @@ -2615,7 +2620,7 @@ static void scic_sds_port_resetting_state_exit( this_port = (struct scic_sds_port *)object; - scic_cb_timer_stop( + isci_event_timer_stop( scic_sds_port_get_controller(this_port), this_port->timer_handle ); @@ -2655,7 +2660,7 @@ static void scic_sds_port_stopping_state_exit( this_port = (struct scic_sds_port *)object; - scic_cb_timer_stop( + isci_event_timer_stop( scic_sds_port_get_controller(this_port), this_port->timer_handle ); @@ -2681,7 +2686,7 @@ static void scic_sds_port_failed_state_enter( SCI_BASE_PORT_STATE_FAILED ); - scic_cb_port_hard_reset_complete( + isci_event_port_hard_reset_complete( scic_sds_port_get_controller(this_port), this_port, SCI_FAILURE_TIMEOUT diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 001472e..e26a4e6 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -463,7 +463,7 @@ static void scic_sds_mpc_agent_link_down( ) { port_agent->timer_pending = true; - scic_cb_timer_start( + isci_event_timer_start( controller, port_agent->timer, SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT @@ -542,12 +542,12 @@ static void scic_sds_apc_agent_start_timer( u32 timeout) { if (port_agent->timer_pending) { - scic_cb_timer_stop(controller, port_agent->timer); + isci_event_timer_stop(controller, port_agent->timer); } port_agent->timer_pending = true; - scic_cb_timer_start(controller, port_agent->timer, timeout); + isci_event_timer_start(controller, port_agent->timer, timeout); } /** @@ -830,7 +830,7 @@ enum sci_status scic_sds_port_configuration_agent_initialize( port_agent->link_up_handler = scic_sds_mpc_agent_link_up; port_agent->link_down_handler = scic_sds_mpc_agent_link_down; - port_agent->timer = scic_cb_timer_create( + port_agent->timer = isci_event_timer_create( controller, scic_sds_mpc_agent_timeout_handler, controller @@ -841,7 +841,7 @@ enum sci_status scic_sds_port_configuration_agent_initialize( port_agent->link_up_handler = scic_sds_apc_agent_link_up; port_agent->link_down_handler = scic_sds_apc_agent_link_down; - port_agent->timer = scic_cb_timer_create( + port_agent->timer = isci_event_timer_create( controller, scic_sds_apc_agent_timeout_handler, controller diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index cb1cf39..3a8d563 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1817,7 +1817,7 @@ static void scic_sds_remote_device_stopped_state_enter( * the stop operation has completed. */ if (this_device->parent.state_machine.previous_state_id == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) { - scic_cb_remote_device_stop_complete( + isci_event_remote_device_stop_complete( scic_sds_remote_device_get_controller(this_device), this_device, SCI_SUCCESS @@ -1848,7 +1848,7 @@ static void scic_sds_remote_device_starting_state_enter( SCI_BASE_REMOTE_DEVICE_STATE_STARTING ); - scic_cb_remote_device_not_ready( + isci_event_remote_device_not_ready( the_controller, this_device, SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED @@ -1871,7 +1871,7 @@ static void scic_sds_remote_device_starting_state_exit( /* * / @todo Check the device object for the proper return code for this * / callback */ - scic_cb_remote_device_start_complete( + isci_event_remote_device_start_complete( scic_sds_remote_device_get_controller(this_device), this_device, SCI_SUCCESS @@ -1905,7 +1905,7 @@ static void scic_sds_remote_device_ready_state_enter( if (this_device->has_ready_substate_machine) { sci_base_state_machine_start(&this_device->ready_substate_machine); } else { - scic_cb_remote_device_ready(the_controller, this_device); + isci_event_remote_device_ready(the_controller, this_device); } } @@ -1928,7 +1928,7 @@ static void scic_sds_remote_device_ready_state_exit( if (this_device->has_ready_substate_machine) { sci_base_state_machine_stop(&this_device->ready_substate_machine); } else { - scic_cb_remote_device_not_ready( + isci_event_remote_device_not_ready( the_controller, this_device, SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 3bad0bc..909361f 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -2078,14 +2078,14 @@ static void scic_sds_request_completed_state_enter( /* Tell the SCI_USER that the IO request is complete */ if (this_request->is_task_management_request == false) { - scic_cb_io_request_complete( + isci_event_io_request_complete( scic_sds_request_get_controller(this_request), scic_sds_request_get_device(this_request), this_request, this_request->sci_status ); } else { - scic_cb_task_request_complete( + isci_event_task_request_complete( scic_sds_request_get_controller(this_request), scic_sds_request_get_device(this_request), this_request, diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index ea608c1..e90d46e 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -265,7 +265,7 @@ static void scic_sds_smp_remote_device_ready_idle_substate_enter( SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE ); - scic_cb_remote_device_ready( + isci_event_remote_device_ready( scic_sds_remote_device_get_controller(this_device), this_device); } @@ -291,7 +291,7 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter( SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD ); - scic_cb_remote_device_not_ready( + isci_event_remote_device_not_ready( scic_sds_remote_device_get_controller(this_device), this_device, SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index 880e0e5..ce2cb7b 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -667,7 +667,7 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl * the ready notification. */ if (this_device->ready_substate_machine.previous_state_id != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) { - scic_cb_remote_device_ready( + isci_event_remote_device_ready( scic_sds_remote_device_get_controller(this_device), this_device ); } @@ -741,7 +741,7 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter( SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD ); - scic_cb_remote_device_not_ready( + isci_event_remote_device_not_ready( scic_sds_remote_device_get_controller(this_device), this_device, SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED @@ -799,7 +799,7 @@ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( if (this_device->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) { - scic_cb_remote_device_not_ready( + isci_event_remote_device_not_ready( scic_sds_remote_device_get_controller(this_device), this_device, this_device->not_ready_reason diff --git a/drivers/scsi/isci/core/scic_user_callback.h b/drivers/scsi/isci/core/scic_user_callback.h index d1a3cb8..c097711 100644 --- a/drivers/scsi/isci/core/scic_user_callback.h +++ b/drivers/scsi/isci/core/scic_user_callback.h @@ -74,62 +74,6 @@ struct scic_sds_remote_device; struct scic_sds_controller; /** - * scic_cb_timer_create() - This callback method asks the user to create a - * timer and provide a handle for this timer for use in further timer - * interactions. - * @controller: This parameter specifies the controller with which this timer - * is to be associated. - * @timer_callback: This parameter specifies the callback method to be invoked - * whenever the timer expires. - * @cookie: This parameter specifies a piece of information that the user must - * retain. This cookie is to be supplied by the user anytime a timeout - * occurs for the created timer. - * - * The "timer_callback" method should be executed in a mutually exlusive manner - * from the controller completion handler handler. This method returns a handle - * to a timer object created by the user. The handle will be utilized for all - * further interactions relating to this timer. - */ -void *scic_cb_timer_create( - struct scic_sds_controller *controller, - void (*timer_callback)(void *), - void *cookie); - - -/** - * scic_cb_timer_start() - This callback method asks the user to start the - * supplied timer. - * @controller: This parameter specifies the controller with which this timer - * is to associated. - * @timer: This parameter specifies the timer to be started. - * @milliseconds: This parameter specifies the number of milliseconds for which - * to stall. The operating system driver is allowed to round this value up - * where necessary. - * - * All timers in the system started by the SCI Core are one shot timers. - * Therefore, the SCI user should make sure that it removes the timer from it's - * list when a timer actually fires. Additionally, SCI Core user's should be - * able to handle calls from the SCI Core to stop a timer that may already be - * stopped. none - */ -void scic_cb_timer_start( - struct scic_sds_controller *controller, - void *timer, - u32 milliseconds); - -/** - * scic_cb_timer_stop() - This callback method asks the user to stop the - * supplied timer. - * @controller: This parameter specifies the controller with which this timer - * is to associated. - * @timer: This parameter specifies the timer to be stopped. - * - */ -void scic_cb_timer_stop( - struct scic_sds_controller *controller, - void *timer); - -/** * scic_cb_stall_execution() - This method is called when the core requires the * OS driver to stall execution. This method is utilized during * initialization or non-performance paths only. @@ -142,67 +86,6 @@ void scic_cb_timer_stop( void scic_cb_stall_execution( u32 microseconds); -/** - * scic_cb_controller_start_complete() - This user callback will inform the - * user that the controller has finished the start process. - * @controller: This parameter specifies the controller that was started. - * @completion_status: This parameter specifies the results of the start - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void scic_cb_controller_start_complete( - struct scic_sds_controller *controller, - enum sci_status completion_status); - -/** - * scic_cb_controller_stop_complete() - This user callback will inform the user - * that the controller has finished the stop process. - * @controller: This parameter specifies the controller that was stopped. - * @completion_status: This parameter specifies the results of the stop - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void scic_cb_controller_stop_complete( - struct scic_sds_controller *controller, - enum sci_status completion_status); - -/** - * scic_cb_io_request_complete() - This user callback will inform the user that - * an IO request has completed. - * @controller: This parameter specifies the controller on which the IO is - * completing. - * @remote_device: This parameter specifies the remote device on which this IO - * request is completing. - * @io_request: This parameter specifies the IO request that has completed. - * @completion_status: This parameter specifies the results of the IO request - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void scic_cb_io_request_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request, - enum sci_io_status completion_status); - -/** - * scic_cb_task_request_complete() - This user callback will inform the user - * that a task management request completed. - * @controller: This parameter specifies the controller on which the task - * management request is completing. - * @remote_device: This parameter specifies the remote device on which this - * task management request is completing. - * @task_request: This parameter specifies the task management request that has - * completed. - * @completion_status: This parameter specifies the results of the IO request - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void scic_cb_task_request_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *task_request, - enum sci_task_status completion_status); - #ifndef SCI_GET_PHYSICAL_ADDRESS_OPTIMIZATION_ENABLED /** * scic_cb_io_request_get_physical_address() - This callback method asks the @@ -508,204 +391,6 @@ void *scic_cb_get_virtual_address( struct scic_sds_controller *controller, dma_addr_t physical_address); -/** - * scic_cb_port_stop_complete() - This method informs the user when a stop - * operation on the port has completed. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @completion_status: This parameter specifies the status for the operation - * being completed. - * - */ -void scic_cb_port_stop_complete( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - enum sci_status completion_status); - -/** - * scic_cb_port_hard_reset_complete() - This method informs the user when a - * hard reset on the port has completed. This hard reset could have been - * initiated by the user or by the remote port. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @completion_status: This parameter specifies the status for the operation - * being completed. - * - */ -void scic_cb_port_hard_reset_complete( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - enum sci_status completion_status); - -/** - * scic_cb_port_ready() - This method informs the user that the port is now in - * a ready state and can be utilized to issue IOs. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * - */ -void scic_cb_port_ready( - struct scic_sds_controller *controller, - struct scic_sds_port *port); - -/** - * scic_cb_port_not_ready() - This method informs the user that the port is now - * not in a ready (i.e. busy) state and can't be utilized to issue IOs. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @reason_code: This parameter specifies the reason for the port not ready - * callback. - * - */ -void scic_cb_port_not_ready( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - u32 reason_code); - -/** - * scic_cb_port_invalid_link_up() - This method informs the SCI Core user that - * a phy/link became ready, but the phy is not allowed in the port. In some - * situations the underlying hardware only allows for certain phy to port - * mappings. If these mappings are violated, then this API is invoked. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @phy: This parameter specifies the phy that came ready, but the phy can't be - * a valid member of the port. - * - */ -void scic_cb_port_invalid_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy); - -/** - * scic_cb_port_bc_change_primitive_received() - This callback method informs - * the user that a broadcast change primitive was received. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. For instances where the phy on which the primitive was - * received is not part of a port, this parameter will be - * NULL. - * @phy: This parameter specifies the phy on which the primitive was received. - * - */ -void scic_cb_port_bc_change_primitive_received( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy); - - - - -/** - * scic_cb_port_link_up() - This callback method informs the user that a phy - * has become operational and is capable of communicating with the remote - * end point. - * @controller: This parameter represents the controller associated with the - * phy. - * @port: This parameter specifies the port object for which the user callback - * is being invoked. There may be conditions where this parameter can be - * NULL - * @phy: This parameter specifies the phy object for which the user callback is - * being invoked. - * - */ -void scic_cb_port_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy); - -/** - * scic_cb_port_link_down() - This callback method informs the user that a phy - * is no longer operational and is not capable of communicating with the - * remote end point. - * @controller: This parameter represents the controller associated with the - * phy. - * @port: This parameter specifies the port object for which the user callback - * is being invoked. There may be conditions where this parameter can be - * NULL - * @phy: This parameter specifies the phy object for which the user callback is - * being invoked. - * - */ -void scic_cb_port_link_down( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy); - -/** - * scic_cb_remote_device_start_complete() - This user callback method will - * inform the user that a start operation has completed. - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the completion callback. - * @completion_status: This parameter specifies the completion status for the - * operation. - * - */ -void scic_cb_remote_device_start_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - enum sci_status completion_status); - -/** - * scic_cb_remote_device_stop_complete() - This user callback method will - * inform the user that a stop operation has completed. - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the completion callback. - * @completion_status: This parameter specifies the completion status for the - * operation. - * - */ -void scic_cb_remote_device_stop_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - enum sci_status completion_status); - -/** - * scic_cb_remote_device_ready() - This user callback method will inform the - * user that a remote device is now capable of handling IO requests. - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the callback. - * - */ -void scic_cb_remote_device_ready( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device); - -/** - * scic_cb_remote_device_not_ready() - This user callback method will inform - * the user that a remote device is no longer capable of handling IO - * requests (until a ready callback is invoked). - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the callback. - * @reason_code: This paramete specifies the reason the remote device is not - * ready. - * - */ -void scic_cb_remote_device_not_ready( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - u32 reason_code); - #if !defined(DISABLE_ATAPI) /** * scic_cb_stp_packet_io_request_get_cdb_address() - This user callback gets diff --git a/drivers/scsi/isci/events.c b/drivers/scsi/isci/events.c index 6911ea5..8872f4c 100644 --- a/drivers/scsi/isci/events.c +++ b/drivers/scsi/isci/events.c @@ -64,9 +64,10 @@ #include "request.h" #include "sata.h" #include "task.h" +#include "events.h" /** - * scic_cb_timer_create() - This callback method asks the user to create a + * isci_event_timer_create() - This callback method asks the user to create a * timer and provide a handle for this timer for use in further timer * interactions. The appropriate isci timer object function is called to * create a timer object. @@ -81,7 +82,7 @@ * This method returns a handle to a timer object created by the user. The * handle will be utilized for all further interactions relating to this timer. */ -void *scic_cb_timer_create( +void *isci_event_timer_create( struct scic_sds_controller *controller, void (*timer_callback)(void *), void *cookie) @@ -107,7 +108,7 @@ void *scic_cb_timer_create( /** - * scic_cb_timer_start() - This callback method asks the user to start the + * isci_event_timer_start() - This callback method asks the user to start the * supplied timer. The appropriate isci timer object function is called to * start the timer. * @controller: This parameter specifies the controller with which this timer @@ -118,7 +119,7 @@ void *scic_cb_timer_create( * where necessary. * */ -void scic_cb_timer_start( +void isci_event_timer_start( struct scic_sds_controller *controller, void *timer, u32 milliseconds) @@ -137,7 +138,7 @@ void scic_cb_timer_start( } /** - * scic_cb_timer_stop() - This callback method asks the user to stop the + * isci_event_timer_stop() - This callback method asks the user to stop the * supplied timer. The appropriate isci timer object function is called to * stop the timer. * @controller: This parameter specifies the controller with which this timer @@ -145,7 +146,7 @@ void scic_cb_timer_start( * @timer: This parameter specifies the timer to be stopped. * */ -void scic_cb_timer_stop( +void isci_event_timer_stop( struct scic_sds_controller *controller, void *timer) { @@ -162,7 +163,7 @@ void scic_cb_timer_stop( } /** - * scic_cb_controller_start_complete() - This user callback will inform the + * isci_event_controller_start_complete() - This user callback will inform the * user that the controller has finished the start process. The associated * isci host adapter's start_complete function is called. * @controller: This parameter specifies the controller that was started. @@ -170,7 +171,7 @@ void scic_cb_timer_stop( * operation. SCI_SUCCESS indicates successful completion. * */ -void scic_cb_controller_start_complete( +void isci_event_controller_start_complete( struct scic_sds_controller *controller, enum sci_status completion_status) { @@ -184,7 +185,7 @@ void scic_cb_controller_start_complete( } /** - * scic_cb_controller_stop_complete() - This user callback will inform the user + * isci_event_controller_stop_complete() - This user callback will inform the user * that the controller has finished the stop process. The associated isci * host adapter's start_complete function is called. * @controller: This parameter specifies the controller that was stopped. @@ -192,7 +193,7 @@ void scic_cb_controller_start_complete( * operation. SCI_SUCCESS indicates successful completion. * */ -void scic_cb_controller_stop_complete( +void isci_event_controller_stop_complete( struct scic_sds_controller *controller, enum sci_status completion_status) { @@ -205,7 +206,7 @@ void scic_cb_controller_stop_complete( } /** - * scic_cb_io_request_complete() - This user callback will inform the user that + * isci_event_io_request_complete() - This user callback will inform the user that * an IO request has completed. * @controller: This parameter specifies the controller on which the IO is * completing. @@ -216,7 +217,7 @@ void scic_cb_controller_stop_complete( * operation. SCI_SUCCESS indicates successful completion. * */ -void scic_cb_io_request_complete( +void isci_event_io_request_complete( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, struct scic_sds_request *scic_io_request, @@ -239,7 +240,7 @@ void scic_cb_io_request_complete( } /** - * scic_cb_task_request_complete() - This user callback will inform the user + * isci_event_task_request_complete() - This user callback will inform the user * that a task management request completed. * @controller: This parameter specifies the controller on which the task * management request is completing. @@ -251,7 +252,7 @@ void scic_cb_io_request_complete( * operation. SCI_SUCCESS indicates successful completion. * */ -void scic_cb_task_request_complete( +void isci_event_task_request_complete( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, struct scic_sds_request *scic_task_request, @@ -271,7 +272,7 @@ void scic_cb_task_request_complete( } /** - * scic_cb_port_stop_complete() - This method informs the user when a stop + * isci_event_port_stop_complete() - This method informs the user when a stop * operation on the port has completed. * @controller: This parameter represents the controller which contains the * port. @@ -281,17 +282,20 @@ void scic_cb_task_request_complete( * being completed. * */ -void scic_cb_port_stop_complete( +void isci_event_port_stop_complete( struct scic_sds_controller *controller, struct scic_sds_port *port, enum sci_status completion_status) { - pr_warn("%s:************************************************\n", - __func__); + struct isci_host *isci_host; + + isci_host = (struct isci_host *)sci_object_get_association(controller); + + dev_notice(&isci_host->pdev->dev, "Port stop complete\n"); } /** - * scic_cb_port_hard_reset_complete() - This method informs the user when a + * isci_event_port_hard_reset_complete() - This method informs the user when a * hard reset on the port has completed. This hard reset could have been * initiated by the user or by the remote port. * @controller: This parameter represents the controller which contains the @@ -302,7 +306,7 @@ void scic_cb_port_stop_complete( * being completed. * */ -void scic_cb_port_hard_reset_complete( +void isci_event_port_hard_reset_complete( struct scic_sds_controller *controller, struct scic_sds_port *port, enum sci_status completion_status) @@ -314,7 +318,7 @@ void scic_cb_port_hard_reset_complete( } /** - * scic_cb_port_ready() - This method informs the user that the port is now in + * isci_event_port_ready() - This method informs the user that the port is now in * a ready state and can be utilized to issue IOs. * @controller: This parameter represents the controller which contains the * port. @@ -322,7 +326,7 @@ void scic_cb_port_hard_reset_complete( * is being invoked. * */ -void scic_cb_port_ready( +void isci_event_port_ready( struct scic_sds_controller *controller, struct scic_sds_port *port) { @@ -342,7 +346,7 @@ void scic_cb_port_ready( } /** - * scic_cb_port_not_ready() - This method informs the user that the port is now + * isci_event_port_not_ready() - This method informs the user that the port is now * not in a ready (i.e. busy) state and can't be utilized to issue IOs. * @controller: This parameter represents the controller which contains the * port. @@ -350,7 +354,7 @@ void scic_cb_port_ready( * is being invoked. * */ -void scic_cb_port_not_ready( +void isci_event_port_not_ready( struct scic_sds_controller *controller, struct scic_sds_port *port, u32 reason_code) @@ -371,7 +375,7 @@ void scic_cb_port_not_ready( } /** - * scic_cb_port_invalid_link_up() - This method informs the SCI Core user that + * isci_event_port_invalid_link_up() - This method informs the SCI Core user that * a phy/link became ready, but the phy is not allowed in the port. In some * situations the underlying hardware only allows for certain phy to port * mappings. If these mappings are violated, then this API is invoked. @@ -383,17 +387,19 @@ void scic_cb_port_not_ready( * a valid member of the port. * */ -void scic_cb_port_invalid_link_up( +void isci_event_port_invalid_link_up( struct scic_sds_controller *controller, struct scic_sds_port *port, struct scic_sds_phy *phy) { - pr_warn("%s:************************************************\n", - __func__); + struct isci_host *isci_host; + + isci_host = (struct isci_host *)sci_object_get_association(controller); + dev_warn(&isci_host->pdev->dev, "Invalid link up!\n"); } /** - * scic_cb_port_bc_change_primitive_received() - This callback method informs + * isci_event_port_bc_change_primitive_received() - This callback method informs * the user that a broadcast change primitive was received. * @controller: This parameter represents the controller which contains the * port. @@ -403,7 +409,7 @@ void scic_cb_port_invalid_link_up( * @phy: This parameter specifies the phy on which the primitive was received. * */ -void scic_cb_port_bc_change_primitive_received( +void isci_event_port_bc_change_primitive_received( struct scic_sds_controller *controller, struct scic_sds_port *port, struct scic_sds_phy *phy) @@ -422,7 +428,7 @@ void scic_cb_port_bc_change_primitive_received( /** - * scic_cb_port_link_up() - This callback method informs the user that a phy + * isci_event_port_link_up() - This callback method informs the user that a phy * has become operational and is capable of communicating with the remote * end point. * @controller: This parameter represents the controller associated with the @@ -435,7 +441,7 @@ void scic_cb_port_bc_change_primitive_received( * * none. */ -void scic_cb_port_link_up( +void isci_event_port_link_up( struct scic_sds_controller *controller, struct scic_sds_port *port, struct scic_sds_phy *phy) @@ -452,7 +458,7 @@ void scic_cb_port_link_up( } /** - * scic_cb_port_link_down() - This callback method informs the user that a phy + * isci_event_port_link_down() - This callback method informs the user that a phy * is no longer operational and is not capable of communicating with the * remote end point. * @controller: This parameter represents the controller associated with the @@ -465,7 +471,7 @@ void scic_cb_port_link_up( * * none. */ -void scic_cb_port_link_down( +void isci_event_port_link_down( struct scic_sds_controller *controller, struct scic_sds_port *port, struct scic_sds_phy *phy) @@ -490,7 +496,7 @@ void scic_cb_port_link_down( } /** - * scic_cb_remote_device_start_complete() - This user callback method will + * isci_event_remote_device_start_complete() - This user callback method will * inform the user that a start operation has completed. * @controller: This parameter specifies the core controller associated with * the completion callback. @@ -500,7 +506,7 @@ void scic_cb_port_link_down( * operation. * */ -void scic_cb_remote_device_start_complete( +void isci_event_remote_device_start_complete( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, enum sci_status completion_status) @@ -525,7 +531,7 @@ void scic_cb_remote_device_start_complete( } /** - * scic_cb_remote_device_stop_complete() - This user callback method will + * isci_event_remote_device_stop_complete() - This user callback method will * inform the user that a stop operation has completed. * @controller: This parameter specifies the core controller associated with * the completion callback. @@ -535,7 +541,7 @@ void scic_cb_remote_device_start_complete( * operation. * */ -void scic_cb_remote_device_stop_complete( +void isci_event_remote_device_stop_complete( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, enum sci_status completion_status) @@ -560,7 +566,7 @@ void scic_cb_remote_device_stop_complete( } /** - * scic_cb_remote_device_ready() - This user callback method will inform the + * isci_event_remote_device_ready() - This user callback method will inform the * user that a remote device is now capable of handling IO requests. * @controller: This parameter specifies the core controller associated with * the completion callback. @@ -568,7 +574,7 @@ void scic_cb_remote_device_stop_complete( * the callback. * */ -void scic_cb_remote_device_ready( +void isci_event_remote_device_ready( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device) { @@ -583,7 +589,7 @@ void scic_cb_remote_device_ready( } /** - * scic_cb_remote_device_not_ready() - This user callback method will inform + * isci_event_remote_device_not_ready() - This user callback method will inform * the user that a remote device is no longer capable of handling IO * requests (until a ready callback is invoked). * @controller: This parameter specifies the core controller associated with @@ -594,7 +600,7 @@ void scic_cb_remote_device_ready( * going to a not ready state. * */ -void scic_cb_remote_device_not_ready( +void isci_event_remote_device_not_ready( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, u32 reason_code) diff --git a/drivers/scsi/isci/events.h b/drivers/scsi/isci/events.h new file mode 100644 index 0000000..98526e9 --- /dev/null +++ b/drivers/scsi/isci/events.h @@ -0,0 +1,370 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_EVENT_H_ +#define _ISCI_EVENT_H_ + +/** + * isci_event_timer_create() - This callback method asks the user to create a + * timer and provide a handle for this timer for use in further timer + * interactions. + * @controller: This parameter specifies the controller with which this timer + * is to be associated. + * @timer_callback: This parameter specifies the callback method to be invoked + * whenever the timer expires. + * @cookie: This parameter specifies a piece of information that the user must + * retain. This cookie is to be supplied by the user anytime a timeout + * occurs for the created timer. + * + * The "timer_callback" method should be executed in a mutually exlusive manner + * from the controller completion handler handler. This method returns a handle + * to a timer object created by the user. The handle will be utilized for all + * further interactions relating to this timer. + */ +void *isci_event_timer_create( + struct scic_sds_controller *controller, + void (*timer_callback)(void *), + void *cookie); + +/** + * isci_event_timer_start() - This callback method asks the user to start the + * supplied timer. + * @controller: This parameter specifies the controller with which this timer + * is to associated. + * @timer: This parameter specifies the timer to be started. + * @milliseconds: This parameter specifies the number of milliseconds for which + * to stall. The operating system driver is allowed to round this value up + * where necessary. + * + * All timers in the system started by the SCI Core are one shot timers. + * Therefore, the SCI user should make sure that it removes the timer from it's + * list when a timer actually fires. Additionally, SCI Core user's should be + * able to handle calls from the SCI Core to stop a timer that may already be + * stopped. none + */ +void isci_event_timer_start( + struct scic_sds_controller *controller, + void *timer, + u32 milliseconds); + +/** + * isci_event_timer_stop() - This callback method asks the user to stop the + * supplied timer. + * @controller: This parameter specifies the controller with which this timer + * is to associated. + * @timer: This parameter specifies the timer to be stopped. + * + */ +void isci_event_timer_stop( + struct scic_sds_controller *controller, + void *timer); + +/** + * isci_event_controller_start_complete() - This user callback will inform the + * user that the controller has finished the start process. + * @controller: This parameter specifies the controller that was started. + * @completion_status: This parameter specifies the results of the start + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void isci_event_controller_start_complete( + struct scic_sds_controller *controller, + enum sci_status completion_status); + +/** + * isci_event_controller_stop_complete() - This user callback will inform the + * user that the controller has finished the stop process. + * @controller: This parameter specifies the controller that was stopped. + * @completion_status: This parameter specifies the results of the stop + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void isci_event_controller_stop_complete( + struct scic_sds_controller *controller, + enum sci_status completion_status); + +/** + * isci_event_io_request_complete() - This user callback will inform the user + * that an IO request has completed. + * @controller: This parameter specifies the controller on which the IO is + * completing. + * @remote_device: This parameter specifies the remote device on which this IO + * request is completing. + * @io_request: This parameter specifies the IO request that has completed. + * @completion_status: This parameter specifies the results of the IO request + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void isci_event_io_request_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *scic_io_request, + enum sci_io_status completion_status); + +/** + * isci_event_task_request_complete() - This user callback will inform the user + * that a task management request completed. + * @controller: This parameter specifies the controller on which the task + * management request is completing. + * @remote_device: This parameter specifies the remote device on which this + * task management request is completing. + * @task_request: This parameter specifies the task management request that has + * completed. + * @completion_status: This parameter specifies the results of the IO request + * operation. SCI_SUCCESS indicates successful completion. + * + */ +void isci_event_task_request_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *scic_task_request, + enum sci_task_status completion_status); + +/** + * isci_event_port_stop_complete() - This method informs the user when a stop + * operation on the port has completed. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @completion_status: This parameter specifies the status for the operation + * being completed. + * + */ +void isci_event_port_stop_complete( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + enum sci_status completion_status); + +/** + * isci_event_port_hard_reset_complete() - This method informs the user when a + * hard reset on the port has completed. This hard reset could have been + * initiated by the user or by the remote port. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @completion_status: This parameter specifies the status for the operation + * being completed. + * + */ +void isci_event_port_hard_reset_complete( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + enum sci_status completion_status); + +/** + * isci_event_port_ready() - This method informs the user that the port is now + * in a ready state and can be utilized to issue IOs. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * + */ +void isci_event_port_ready( + struct scic_sds_controller *controller, + struct scic_sds_port *port); + +/** + * isci_event_port_not_ready() - This method informs the user that the port is + * now not in a ready (i.e. busy) state and can't be utilized to issue IOs. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @reason_code: This parameter specifies the reason for the port not ready + * callback. + * + */ +void isci_event_port_not_ready( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + u32 reason_code); + +/** + * isci_event_port_invalid_link_up() - This method informs the SCI Core user + * that a phy/link became ready, but the phy is not allowed in the port. In + * some situations the underlying hardware only allows for certain phy to port + * mappings. If these mappings are violated, then this API is invoked. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @phy: This parameter specifies the phy that came ready, but the phy can't be + * a valid member of the port. + * + */ +void isci_event_port_invalid_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +/** + * isci_event_port_bc_change_primitive_received() - This callback method informs + * the user that a broadcast change primitive was received. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. For instances where the phy on which the primitive was + * received is not part of a port, this parameter will be + * NULL. + * @phy: This parameter specifies the phy on which the primitive was received. + * + */ +void isci_event_port_bc_change_primitive_received( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +/** + * isci_event_port_link_up() - This callback method informs the user that a phy + * has become operational and is capable of communicating with the remote + * end point. + * @controller: This parameter represents the controller associated with the + * phy. + * @port: This parameter specifies the port object for which the user callback + * is being invoked. There may be conditions where this parameter can be + * NULL + * @phy: This parameter specifies the phy object for which the user callback is + * being invoked. + * + */ +void isci_event_port_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +/** + * isci_event_port_link_down() - This callback method informs the user that a + * phy is no longer operational and is not capable of communicating with the + * remote end point. + * @controller: This parameter represents the controller associated with the + * phy. + * @port: This parameter specifies the port object for which the user callback + * is being invoked. There may be conditions where this parameter can be + * NULL + * @phy: This parameter specifies the phy object for which the user callback is + * being invoked. + * + */ +void isci_event_port_link_down( + struct scic_sds_controller *controller, + struct scic_sds_port *port, + struct scic_sds_phy *phy); + +/** + * isci_event_remote_device_start_complete() - This user callback method will + * inform the user that a start operation has completed. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the completion callback. + * @completion_status: This parameter specifies the completion status for the + * operation. + * + */ +void isci_event_remote_device_start_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + enum sci_status completion_status); + +/** + * isci_event_remote_device_stop_complete() - This user callback method will + * inform the user that a stop operation has completed. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the completion callback. + * @completion_status: This parameter specifies the completion status for the + * operation. + * + */ +void isci_event_remote_device_stop_complete( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + enum sci_status completion_status); + +/** + * isci_event_remote_device_ready() - This user callback method will inform the + * user that a remote device is now capable of handling IO requests. + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the callback. + * + */ +void isci_event_remote_device_ready( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device); + +/** + * isci_event_remote_device_not_ready() - This user callback method will inform + * the user that a remote device is no longer capable of handling IO + * requests (until a ready callback is invoked). + * @controller: This parameter specifies the core controller associated with + * the completion callback. + * @remote_device: This parameter specifies the remote device associated with + * the callback. + * @reason_code: This paramete specifies the reason the remote device is not + * ready. + * + */ +void isci_event_remote_device_not_ready( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device, + u32 reason_code); + +#endif diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 225764f..9ec91f8 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -85,6 +85,7 @@ #include "timers.h" #include "sci_status.h" #include "request.h" +#include "events.h" extern struct kmem_cache *isci_kmem_cache; extern struct isci_firmware *isci_firmware; -- cgit v0.10.2 From 7392d27580df2d14b5c3b1a1d7989c06457a819d Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 23 Feb 2011 15:57:33 -0800 Subject: isci: Removing deprecated functions Removed all callbacks in the deprecated.c. Core will call the appropriate functions directly. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 34f7af3..d402d67 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -8,7 +8,7 @@ EXTRA_CFLAGS += -DDISABLE_ATAPI EXTRA_CFLAGS += -Idrivers/scsi/isci/core/ -Idrivers/scsi/isci/ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ - remote_device.o port.o timers.o deprecated.o \ + remote_device.o port.o timers.o \ host.o task.o events.o \ core/scic_sds_controller.o \ core/scic_sds_remote_device.o \ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index b0f9221d..d642ff7 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -66,7 +66,6 @@ #include "scic_sds_port.h" #include "scic_sds_remote_device.h" #include "scic_sds_request.h" -#include "scic_user_callback.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" @@ -594,7 +593,7 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) /* Clear DFX Status registers */ scu_afe_register_write(scic, afe_dfx_master_control0, 0x0081000f); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); /* Configure bias currents to normal */ if (is_a0()) @@ -602,7 +601,7 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) else scu_afe_register_write(scic, afe_bias_control, 0x00005A00); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ if (is_b0()) @@ -610,35 +609,35 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) else scu_afe_register_write(scic, afe_pll_control0, 0x80040908); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); /* Wait for the PLL to lock */ do { afe_status = scu_afe_register_read( scic, afe_common_block_status); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); if (is_b0()) { /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ scu_afe_register_write(scic, afe_pmsn_master_control0, 0x7bcc96ad); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); } for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { if (is_b0()) { /* Configure transmitter SSC parameters */ scu_afe_txreg_write(scic, phy_id, afe_tx_ssc_control, 0x00030000); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); } else { /* * All defaults, except the Receive Word Alignament/Comma Detect * Enable....(0xe800) */ scu_afe_txreg_write(scic, phy_id, afe_xcvr_control0, 0x00004512); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); scu_afe_txreg_write(scic, phy_id, afe_xcvr_control1, 0x0050100F); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); } /* @@ -651,26 +650,26 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) else { /* Power down TX and RX (PWRDNTX and PWRDNRX) */ scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003d7); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); /* * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003d4); } - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); if (is_a0() || is_a2()) { /* Enable TX equalization (0xe824) */ scu_afe_txreg_write(scic, phy_id, afe_tx_control, 0x00040000); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); } /* * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), * RDD=0x0(RX Detect Enabled) ....(0xe800) */ scu_afe_txreg_write(scic, phy_id, afe_xcvr_control0, 0x00004100); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); /* Leave DFE/FFE on */ if (is_a0()) @@ -679,28 +678,28 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F11103F); else { scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F11103F); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ scu_afe_txreg_write(scic, phy_id, afe_tx_control, 0x00040000); } - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, 0x000E7C03); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control1, 0x000E7C03); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control2, 0x000E7C03); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control3, 0x000E7C03); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); } /* Transfer control to the PEs */ scu_afe_register_write(scic, afe_dfx_master_control0, 0x00010f00); - scic_cb_stall_execution(AFE_REGISTER_WRITE_DELAY); + udelay(AFE_REGISTER_WRITE_DELAY); } /* @@ -2446,7 +2445,7 @@ void scic_sds_controller_reset_hardware( SMU_SMUSRCR_WRITE(scic, 0xFFFFFFFF); /* Delay for 1ms to before clearing the CQP and UFQPR. */ - scic_cb_stall_execution(1000); + udelay(1000); /* The write to the CQGR clears the CQP */ SMU_CQGR_WRITE(scic, 0x00000000); @@ -2840,7 +2839,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler( while (terminate_loop-- && (result != SCI_SUCCESS)) { /* Loop until the hardware reports success */ - scic_cb_stall_execution(SCU_CONTEXT_RAM_INIT_STALL_TIME); + udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); status = SMU_SMUCSR_READ(this_controller); if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) { diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 92a5d29..d4a5e38 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -63,7 +63,6 @@ #include "scic_sds_phy_registers.h" #include "scic_sds_port.h" #include "scic_sds_remote_node_context.h" -#include "scic_user_callback.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index f31e6dc..d374c7a 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -66,7 +66,6 @@ #include "scic_sds_remote_device.h" #include "scic_sds_remote_node_context.h" #include "scic_sds_request.h" -#include "scic_user_callback.h" #include "sci_environment.h" diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 3a8d563..a7cb4bc 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -64,7 +64,6 @@ #include "scic_sds_remote_device.h" #include "scic_sds_remote_node_context.h" #include "scic_sds_request.h" -#include "scic_user_callback.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 909361f..7b9ce1e 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -70,7 +70,6 @@ #include "scic_sds_smp_request.h" #include "scic_sds_stp_request.h" #include "scic_sds_unsolicited_frame_control.h" -#include "scic_user_callback.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" @@ -413,25 +412,26 @@ static void scic_sds_ssp_io_request_assign_buffers( * */ static void scic_sds_io_request_build_ssp_command_iu( - struct scic_sds_request *this_request) + struct scic_sds_request *sds_request) { struct sci_ssp_command_iu *command_frame; - void *os_handle; u32 cdb_length; u32 *cdb_buffer; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sds_request); command_frame = - (struct sci_ssp_command_iu *)this_request->command_buffer; - - os_handle = scic_sds_request_get_user_request(this_request); + (struct sci_ssp_command_iu *)sds_request->command_buffer; command_frame->lun_upper = 0; - command_frame->lun_lower = scic_cb_ssp_io_request_get_lun(os_handle); + command_frame->lun_lower = + isci_request_ssp_io_request_get_lun(isci_request); ((u32 *)command_frame)[2] = 0; - cdb_length = scic_cb_ssp_io_request_get_cdb_length(os_handle); - cdb_buffer = (u32 *)scic_cb_ssp_io_request_get_cdb_address(os_handle); + cdb_length = isci_request_ssp_io_request_get_cdb_length(isci_request); + cdb_buffer = (u32 *)isci_request_ssp_io_request_get_cdb_address( + isci_request); if (cdb_length > 16) { command_frame->additional_cdb_length = cdb_length - 16; @@ -446,9 +446,9 @@ static void scic_sds_io_request_build_ssp_command_iu( command_frame->enable_first_burst = 0; command_frame->task_priority = - scic_cb_ssp_io_request_get_command_priority(os_handle); + isci_request_ssp_io_request_get_command_priority(isci_request); command_frame->task_attribute = - scic_cb_ssp_io_request_get_task_attribute(os_handle); + isci_request_ssp_io_request_get_task_attribute(isci_request); } @@ -458,25 +458,26 @@ static void scic_sds_io_request_build_ssp_command_iu( * */ static void scic_sds_task_request_build_ssp_task_iu( - struct scic_sds_request *this_request) + struct scic_sds_request *sds_request) { struct sci_ssp_task_iu *command_frame; - void *os_handle; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sds_request); command_frame = - (struct sci_ssp_task_iu *)this_request->command_buffer; - - os_handle = scic_sds_request_get_user_request(this_request); + (struct sci_ssp_task_iu *)sds_request->command_buffer; command_frame->lun_upper = 0; - command_frame->lun_lower = scic_cb_ssp_task_request_get_lun(os_handle); + command_frame->lun_lower = isci_request_ssp_io_request_get_lun( + isci_request); ((u32 *)command_frame)[2] = 0; command_frame->task_function = - scic_cb_ssp_task_request_get_function(os_handle); + isci_task_ssp_request_get_function(isci_request); command_frame->task_tag = - scic_cb_ssp_task_request_get_io_tag_to_manage(os_handle); + isci_task_ssp_request_get_io_tag_to_manage( + isci_request); } @@ -899,18 +900,15 @@ enum sci_status scic_task_request_construct( enum sci_status scic_io_request_construct_basic_ssp( struct scic_sds_request *sci_req) { - void *os_handle; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sci_req); sci_req->protocol = SCIC_SSP_PROTOCOL; - os_handle = scic_sds_request_get_user_request(sci_req); - scu_ssp_io_request_construct_task_context( sci_req, - scic_cb_io_request_get_data_direction(os_handle), - scic_cb_io_request_get_transfer_length(os_handle) - ); - + isci_request_io_request_get_data_direction(isci_request), + isci_request_io_request_get_transfer_length(isci_request)); scic_sds_io_request_build_ssp_command_iu(sci_req); @@ -941,7 +939,8 @@ enum sci_status scic_task_request_construct_ssp( } -enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sci_req) +enum sci_status scic_io_request_construct_basic_sata( + struct scic_sds_request *sci_req) { enum sci_status status; struct scic_sds_stp_request *stp_req; @@ -949,15 +948,18 @@ enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sc u32 len; enum dma_data_direction dir; bool copy = false; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sci_req); + struct sas_task *task = isci_request_access_task(isci_request); stp_req = container_of(sci_req, typeof(*stp_req), parent); sci_req->protocol = SCIC_STP_PROTOCOL; - len = scic_cb_io_request_get_transfer_length(sci_req->user_request); - dir = scic_cb_io_request_get_data_direction(sci_req->user_request); - proto = scic_cb_request_get_sat_protocol(sci_req->user_request); - copy = scic_cb_io_request_do_copy_rx_frames(stp_req->parent.user_request); + len = isci_request_io_request_get_transfer_length(isci_request); + dir = isci_request_io_request_get_data_direction(isci_request); + proto = isci_sata_get_sat_protocol(isci_request); + copy = (task->data_dir == DMA_NONE) ? false : true; status = scic_io_request_construct_sata(sci_req, proto, len, dir, copy); @@ -975,7 +977,11 @@ enum sci_status scic_task_request_construct_sata( struct scic_sds_request *sci_req) { enum sci_status status; - u8 sat_protocol = scic_cb_request_get_sat_protocol(sci_req->user_request); + u8 sat_protocol; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sci_req); + + sat_protocol = isci_sata_get_sat_protocol(isci_request); switch (sat_protocol) { case SAT_PROTOCOL_ATA_HARD_RESET: @@ -1172,27 +1178,28 @@ enum sci_status scic_sds_io_request_frame_handler( * the response data. * */ -void scic_sds_io_request_copy_response( - struct scic_sds_request *this_request) +void scic_sds_io_request_copy_response(struct scic_sds_request *sds_request) { void *response_buffer; u32 user_response_length; u32 core_response_length; struct sci_ssp_response_iu *ssp_response; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sds_request); - ssp_response = (struct sci_ssp_response_iu *)this_request->response_buffer; + ssp_response = + (struct sci_ssp_response_iu *)sds_request->response_buffer; - response_buffer = scic_cb_ssp_task_request_get_response_data_address( - this_request->user_request - ); + response_buffer = + isci_task_ssp_request_get_response_data_address( + isci_request); - user_response_length = scic_cb_ssp_task_request_get_response_data_length( - this_request->user_request - ); + user_response_length = + isci_task_ssp_request_get_response_data_length( + isci_request); core_response_length = sci_ssp_get_response_data_length( - ssp_response->response_data_length - ); + ssp_response->response_data_length); user_response_length = min(user_response_length, core_response_length); diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index e90d46e..93e6ab8 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -58,7 +58,6 @@ #include "scic_sds_port.h" #include "scic_sds_remote_device.h" #include "scic_sds_request.h" -#include "scic_user_callback.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index ce2cb7b..1d8d901 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -62,7 +62,6 @@ #include "scic_sds_port.h" #include "scic_sds_remote_device.h" #include "scic_sds_request.h" -#include "scic_user_callback.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" @@ -217,52 +216,56 @@ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_h * @device: * @request: * - * If this is a softreset we may want to have a different substate. enum sci_status + * If this is a softreset we may want to have a different substate. + * enum sci_status */ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( - struct sci_base_remote_device *device, - struct sci_base_request *request) + struct sci_base_remote_device *base_device, + struct sci_base_request *base_request) { enum sci_status status; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - struct scic_sds_request *io_request = (struct scic_sds_request *)request; + struct scic_sds_remote_device *device = + (struct scic_sds_remote_device *)&base_device->parent; + struct scic_sds_request *sds_request = + (struct scic_sds_request *)&base_request->parent; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sds_request); /* Will the port allow the io request to start? */ - status = this_device->owning_port->state_handlers->start_io_handler( - this_device->owning_port, - this_device, - io_request - ); + status = device->owning_port->state_handlers->start_io_handler( + device->owning_port, + device, + sds_request); if (status == SCI_SUCCESS) { status = - scic_sds_remote_node_context_start_io(this_device->rnc, io_request); + scic_sds_remote_node_context_start_io(device->rnc, + sds_request); - if (status == SCI_SUCCESS) { - status = io_request->state_handlers->parent.start_handler(request); - } + if (status == SCI_SUCCESS) + status = + sds_request->state_handlers-> + parent.start_handler(base_request); if (status == SCI_SUCCESS) { - if ( - scic_cb_request_get_sat_protocol(io_request->user_request) - == SAT_PROTOCOL_FPDMA - ) { + if (isci_sata_get_sat_protocol(isci_request) == + SAT_PROTOCOL_FPDMA) sci_base_state_machine_change_state( - &this_device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ - ); - } else { - this_device->working_request = io_request; + &device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); + else { + device->working_request = sds_request; sci_base_state_machine_change_state( - &this_device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD - ); + &device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); } } - scic_sds_remote_device_start_request(this_device, io_request, status); + scic_sds_remote_device_start_request(device, + sds_request, + status); } return status; @@ -304,35 +307,38 @@ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_hand * ***************************************************************************** */ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( - struct sci_base_remote_device *device, - struct sci_base_request *request) + struct sci_base_remote_device *base_device, + struct sci_base_request *base_request) { enum sci_status status; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - struct scic_sds_request *io_request = (struct scic_sds_request *)request; - - if ( - scic_cb_request_get_sat_protocol(io_request->user_request) - == SAT_PROTOCOL_FPDMA - ) { - status = this_device->owning_port->state_handlers->start_io_handler( - this_device->owning_port, - this_device, - io_request - ); + struct scic_sds_remote_device *device = + (struct scic_sds_remote_device *)&base_device->parent; + struct scic_sds_request *sds_request = + (struct scic_sds_request *)&base_request->parent; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(sds_request); + + if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { + status = device->owning_port->state_handlers->start_io_handler( + device->owning_port, + device, + sds_request); if (status == SCI_SUCCESS) { - status = scic_sds_remote_node_context_start_io(this_device->rnc, io_request); + status = scic_sds_remote_node_context_start_io( + device->rnc, + sds_request); - if (status == SCI_SUCCESS) { - status = io_request->state_handlers->parent.start_handler(request); - } + if (status == SCI_SUCCESS) + status = sds_request->state_handlers-> + parent.start_handler(base_request); - scic_sds_remote_device_start_request(this_device, io_request, status); + scic_sds_remote_device_start_request(device, + sds_request, + status); } - } else { + } else status = SCI_FAILURE_INVALID_STATE; - } return status; } diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 0a07207..0f17a28 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -67,7 +67,6 @@ #include "scic_sds_stp_pio_request.h" #include "scic_sds_stp_request.h" #include "scic_sds_unsolicited_frame_control.h" -#include "scic_user_callback.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c index 7274812..66be58b 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c @@ -64,7 +64,6 @@ #include "scic_sds_unsolicited_frame_control.h" #include "scu_registers.h" #include "scic_sds_controller.h" -#include "scic_user_callback.h" #include "sci_util.h" #include "sci_environment.h" diff --git a/drivers/scsi/isci/core/scic_user_callback.h b/drivers/scsi/isci/core/scic_user_callback.h deleted file mode 100644 index c097711..0000000 --- a/drivers/scsi/isci/core/scic_user_callback.h +++ /dev/null @@ -1,421 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_USER_CALLBACK_H_ -#define _SCIC_USER_CALLBACK_H_ - -/** - * This file contains all of the interface methods/macros that must be - * implemented by an SCI Core user. - * - * - */ - - -#include "sci_status.h" -#include "scic_io_request.h" - -struct scic_sds_request; -struct scic_sds_phy; -struct scic_sds_port; -struct scic_sds_remote_device; -struct scic_sds_controller; - -/** - * scic_cb_stall_execution() - This method is called when the core requires the - * OS driver to stall execution. This method is utilized during - * initialization or non-performance paths only. - * @microseconds: This parameter specifies the number of microseconds for which - * to stall. The operating system driver is allowed to round this value up - * where necessary. - * - * none. - */ -void scic_cb_stall_execution( - u32 microseconds); - -#ifndef SCI_GET_PHYSICAL_ADDRESS_OPTIMIZATION_ENABLED -/** - * scic_cb_io_request_get_physical_address() - This callback method asks the - * user to provide the physical address for the supplied virtual address - * when building an io request object. - * @controller: This parameter is the core controller object handle. - * @io_request: This parameter is the io request object handle for which the - * physical address is being requested. - * @virtual_address: This paramter is the virtual address which is to be - * returned as a physical address. - * @physical_address: The physical address for the supplied virtual address. - * - * None. - */ -void scic_cb_io_request_get_physical_address( - struct scic_sds_controller *controller, - struct scic_sds_request *io_request, - void *virtual_address, - dma_addr_t *physical_address); -#endif /* SCI_GET_PHYSICAL_ADDRESS_OPTIMIZATION_ENABLED */ - -/** - * scic_cb_io_request_get_transfer_length() - This callback method asks the - * user to provide the number of bytes to be transfered as part of this - * request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the number of payload data bytes to be transfered for - * this IO request. - */ -u32 scic_cb_io_request_get_transfer_length( - void *scic_user_io_request); - -/** - * scic_cb_io_request_get_data_direction() - This callback method asks the user - * to provide the data direction for this request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - */ -enum dma_data_direction scic_cb_io_request_get_data_direction(void *req); - -#ifndef SCI_SGL_OPTIMIZATION_ENABLED -/** - * scic_cb_io_request_get_next_sge() - This callback method asks the user to - * provide the address to where the next Scatter-Gather Element is located. - * Details regarding usage: - Regarding the first SGE: the user should - * initialize an index, or a pointer, prior to construction of the request - * that will reference the very first scatter-gather element. This is - * important since this method is called for every scatter-gather element, - * including the first element. - Regarding the last SGE: the user should - * return NULL from this method when this method is called and the SGL has - * exhausted all elements. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * @current_sge_address: This parameter specifies the address for the current - * SGE (i.e. the one that has just processed). - * @next_sge: An address specifying the location for the next scatter gather - * element to be processed. - * - * None - */ -void scic_cb_io_request_get_next_sge( - void *scic_user_io_request, - void *current_sge_address, - void **next_sge); -#endif /* SCI_SGL_OPTIMIZATION_ENABLED */ - -/** - * scic_cb_sge_get_address_field() - This callback method asks the user to - * provide the contents of the "address" field in the Scatter-Gather Element. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * @sge_address: This parameter specifies the address for the SGE from which to - * retrieve the address field. - * - * A physical address specifying the contents of the SGE's address field. - */ -dma_addr_t scic_cb_sge_get_address_field( - void *scic_user_io_request, - void *sge_address); - -/** - * scic_cb_sge_get_length_field() - This callback method asks the user to - * provide the contents of the "length" field in the Scatter-Gather Element. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * @sge_address: This parameter specifies the address for the SGE from which to - * retrieve the address field. - * - * This method returns the length field specified inside the SGE referenced by - * the sge_address parameter. - */ -u32 scic_cb_sge_get_length_field( - void *scic_user_io_request, - void *sge_address); - -/** - * scic_cb_ssp_io_request_get_cdb_address() - This callback method asks the - * user to provide the address for the command descriptor block (CDB) - * associated with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the virtual address of the CDB. - */ -void *scic_cb_ssp_io_request_get_cdb_address( - void *scic_user_io_request); - -/** - * scic_cb_ssp_io_request_get_cdb_length() - This callback method asks the user - * to provide the length of the command descriptor block (CDB) associated - * with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the length of the CDB. - */ -u32 scic_cb_ssp_io_request_get_cdb_length( - void *scic_user_io_request); - -/** - * scic_cb_ssp_io_request_get_lun() - This callback method asks the user to - * provide the Logical Unit (LUN) associated with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * The contents of the value returned from this callback are defined by the - * protocol standard (e.g. T10 SAS specification). Please refer to the - * transport command information unit description in the associated standard. - * This method returns the LUN associated with this request. This should be u64? - */ -u32 scic_cb_ssp_io_request_get_lun( - void *scic_user_io_request); - -/** - * scic_cb_ssp_io_request_get_task_attribute() - This callback method asks the - * user to provide the task attribute associated with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * The contents of the value returned from this callback are defined by the - * protocol standard (e.g. T10 SAS specification). Please refer to the - * transport command information unit description in the associated standard. - * This method returns the task attribute associated with this IO request. - */ -u32 scic_cb_ssp_io_request_get_task_attribute( - void *scic_user_io_request); - -/** - * scic_cb_ssp_io_request_get_command_priority() - This callback method asks - * the user to provide the command priority associated with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * The contents of the value returned from this callback are defined by the - * protocol standard (e.g. T10 SAS specification). Please refer to the - * transport command information unit description in the associated standard. - * This method returns the command priority associated with this IO request. - */ -u32 scic_cb_ssp_io_request_get_command_priority( - void *scic_user_io_request); - -/** - * scic_cb_io_request_do_copy_rx_frames() - This callback method asks the user - * if the received RX frame data is to be copied to the SGL or should be - * stored by the SCI core to be retrieved later with the - * scic_io_request_get_rx_frame(). - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns true if the SCI core should copy the received frame data - * to the SGL location or false if the SCI user wants to retrieve the frame - * data at a later time. - */ -bool scic_cb_io_request_do_copy_rx_frames( - void *scic_user_io_request); - -/** - * scic_cb_request_get_sat_protocol() - This callback method asks the user to - * return the SAT protocol definition for this IO request. This method is - * only called by the SCI core if the request type constructed is SATA. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns one of the sat.h defined protocols for the given io - * request. - */ -u8 scic_cb_request_get_sat_protocol( - void *scic_user_io_request); - - -/** - * scic_cb_ssp_task_request_get_lun() - This method returns the Logical Unit to - * be utilized for this task management request. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * The contents of the value returned from this callback are defined by the - * protocol standard (e.g. T10 SAS specification). Please refer to the - * transport task information unit description in the associated standard. This - * method returns the LUN associated with this request. This should be u64? - */ -u32 scic_cb_ssp_task_request_get_lun( - void *scic_user_task_request); - -/** - * scic_cb_ssp_task_request_get_function() - This method returns the task - * management function to be utilized for this task request. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * The contents of the value returned from this callback are defined by the - * protocol standard (e.g. T10 SAS specification). Please refer to the - * transport task information unit description in the associated standard. This - * method returns an unsigned byte representing the task management function to - * be performed. - */ -u8 scic_cb_ssp_task_request_get_function( - void *scic_user_task_request); - -/** - * scic_cb_ssp_task_request_get_io_tag_to_manage() - This method returns the - * task management IO tag to be managed. Depending upon the task management - * function the value returned from this method may be ignored. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns an unsigned 16-bit word depicting the IO tag to be - * managed. - */ -u16 scic_cb_ssp_task_request_get_io_tag_to_manage( - void *scic_user_task_request); - -/** - * scic_cb_ssp_task_request_get_response_data_address() - This callback method - * asks the user to provide the virtual address of the response data buffer - * for the supplied IO request. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the virtual address for the response data buffer - * associated with this IO request. - */ -void *scic_cb_ssp_task_request_get_response_data_address( - void *scic_user_task_request); - -/** - * scic_cb_ssp_task_request_get_response_data_length() - This callback method - * asks the user to provide the length of the response data buffer for the - * supplied IO request. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the length of the response buffer data associated with - * this IO request. - */ -u32 scic_cb_ssp_task_request_get_response_data_length( - void *scic_user_task_request); - -/** - * scic_cb_pci_get_bar() - In this method the user must return the base address - * register (BAR) value for the supplied base address register number. - * @controller: The controller for which to retrieve the bar number. - * @bar_number: This parameter depicts the BAR index/number to be read. - * - * Return a pointer value indicating the contents of the BAR. NULL indicates an - * invalid BAR index/number was specified. All other values indicate a valid - * VIRTUAL address from the BAR. - */ -void *scic_cb_pci_get_bar( - struct scic_sds_controller *controller, - u16 bar_number); - -/** - * scic_cb_get_virtual_address() - This callback method asks the user to - * provide the virtual address for the supplied physical address. - * @controller: This parameter is the core controller object handle. - * @physical_address: This parameter is the physical address which is to be - * returned as a virtual address. - * - * The method returns the virtual address for the supplied physical address. - */ -void *scic_cb_get_virtual_address( - struct scic_sds_controller *controller, - dma_addr_t physical_address); - -#if !defined(DISABLE_ATAPI) -/** - * scic_cb_stp_packet_io_request_get_cdb_address() - This user callback gets - * from stp packet io's user request the CDB address. - * @scic_user_io_request: - * - * The cdb adress. - */ -void *scic_cb_stp_packet_io_request_get_cdb_address( - void *scic_user_io_request); - -/** - * scic_cb_stp_packet_io_request_get_cdb_length() - This user callback gets - * from stp packet io's user request the CDB length. - * @scic_user_io_request: - * - * The cdb length. - */ -u32 scic_cb_stp_packet_io_request_get_cdb_length( - void *scic_user_io_request); -#else /* !defined(DISABLE_ATAPI) */ -#define scic_cb_stp_packet_io_request_get_cdb_address(scic_user_io_request) NULL -#define scic_cb_stp_packet_io_request_get_cdb_length(scic_user_io_request) 0 -#endif /* !defined(DISABLE_ATAPI) */ - - -#endif /* _SCIC_USER_CALLBACK_H_ */ - diff --git a/drivers/scsi/isci/deprecated.c b/drivers/scsi/isci/deprecated.c deleted file mode 100644 index 0ee6679..0000000 --- a/drivers/scsi/isci/deprecated.c +++ /dev/null @@ -1,485 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -/** - * This file contains isci module object implementation. - * - * - */ - -#include "isci.h" -#include "request.h" -#include "sata.h" -#include "task.h" - - -/** - * scic_cb_stall_execution() - This method is called when the core requires the - * OS driver to stall execution. This method is utilized during - * initialization or non-performance paths only. - * @microseconds: This parameter specifies the number of microseconds for which - * to stall. The operating system driver is allowed to round this value up - * where necessary. - * - * none. - */ -void scic_cb_stall_execution( - u32 microseconds) -{ - udelay(microseconds); -} - - -/** - * scic_cb_io_request_get_physical_address() - This callback method asks the - * user to provide the physical address for the supplied virtual address - * when building an io request object. - * @controller: This parameter is the core controller object handle. - * @io_request: This parameter is the io request object handle for which the - * physical address is being requested. - * - * - */ -void scic_cb_io_request_get_physical_address( - struct scic_sds_controller *controller, - struct scic_sds_request *io_request, - void *virtual_address, - dma_addr_t *physical_address) -{ - struct isci_request *request = - (struct isci_request *)sci_object_get_association(io_request); - - char *requested_address = (char *)virtual_address; - char *base_address = (char *)request; - - BUG_ON(requested_address < base_address); - BUG_ON((requested_address - base_address) >= - request->request_alloc_size); - - *physical_address = request->request_daddr + - (requested_address - base_address); -} - -/** - * scic_cb_io_request_get_transfer_length() - This callback method asks the - * user to provide the number of bytes to be transfered as part of this - * request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the number of payload data bytes to be transfered for - * this IO request. - */ -u32 scic_cb_io_request_get_transfer_length( - void *scic_user_io_request) -{ - return isci_request_io_request_get_transfer_length( - scic_user_io_request - ); -} - - -/** - * scic_cb_io_request_get_data_direction() - This callback method asks the user - * to provide the data direction for this request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - */ -enum dma_data_direction scic_cb_io_request_get_data_direction(void *req) -{ - return isci_request_io_request_get_data_direction(req); -} - - -/** - * scic_cb_io_request_get_next_sge() - This callback method asks the user to - * provide the address to where the next Scatter-Gather Element is located. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * @current_sge_address: This parameter specifies the address for the current - * SGE (i.e. the one that has just processed). - * - * An address specifying the location for the next scatter gather element to be - * processed. - */ -void scic_cb_io_request_get_next_sge( - void *scic_user_io_request, - void *current_sge_address, - void **next_sge) -{ - *next_sge = isci_request_io_request_get_next_sge( - scic_user_io_request, - current_sge_address - ); -} - -/** - * scic_cb_sge_get_address_field() - This callback method asks the user to - * provide the contents of the "address" field in the Scatter-Gather Element. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * @sge_address: This parameter specifies the address for the SGE from which to - * retrieve the address field. - * - * A physical address specifying the contents of the SGE's address field. - */ -dma_addr_t scic_cb_sge_get_address_field( - void *scic_user_io_request, - void *sge_address) -{ - return isci_request_sge_get_address_field( - scic_user_io_request, - sge_address - ); -} - -/** - * scic_cb_sge_get_length_field() - This callback method asks the user to - * provide the contents of the "length" field in the Scatter-Gather Element. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * @sge_address: This parameter specifies the address for the SGE from which to - * retrieve the address field. - * - * This method returns the length field specified inside the SGE referenced by - * the sge_address parameter. - */ -u32 scic_cb_sge_get_length_field( - void *scic_user_io_request, - void *sge_address) -{ - return isci_request_sge_get_length_field( - scic_user_io_request, - sge_address - ); -} - -/** - * scic_cb_ssp_io_request_get_cdb_address() - This callback method asks the - * user to provide the address for the command descriptor block (CDB) - * associated with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the virtual address of the CDB. - */ -void *scic_cb_ssp_io_request_get_cdb_address( - void *scic_user_io_request) -{ - return isci_request_ssp_io_request_get_cdb_address( - scic_user_io_request - ); -} - -/** - * scic_cb_ssp_io_request_get_cdb_length() - This callback method asks the user - * to provide the length of the command descriptor block (CDB) associated - * with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the length of the CDB. - */ -u32 scic_cb_ssp_io_request_get_cdb_length( - void *scic_user_io_request) -{ - return isci_request_ssp_io_request_get_cdb_length( - scic_user_io_request - ); -} - -/** - * scic_cb_ssp_io_request_get_lun() - This callback method asks the user to - * provide the Logical Unit (LUN) associated with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the LUN associated with this request. This should be u64? - */ -u32 scic_cb_ssp_io_request_get_lun( - void *scic_user_io_request) -{ - return isci_request_ssp_io_request_get_lun(scic_user_io_request); -} - -/** - * scic_cb_ssp_io_request_get_task_attribute() - This callback method asks the - * user to provide the task attribute associated with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the task attribute associated with this IO request. - */ -u32 scic_cb_ssp_io_request_get_task_attribute( - void *scic_user_io_request) -{ - return isci_request_ssp_io_request_get_task_attribute( - scic_user_io_request - ); -} - -/** - * scic_cb_ssp_io_request_get_command_priority() - This callback method asks - * the user to provide the command priority associated with this IO request. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the command priority associated with this IO request. - */ -u32 scic_cb_ssp_io_request_get_command_priority( - void *scic_user_io_request) -{ - return isci_request_ssp_io_request_get_command_priority( - scic_user_io_request - ); -} - -/** - * scic_cb_ssp_task_request_get_lun() - This method returns the Logical Unit to - * be utilized for this task management request. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the LUN associated with this request. This should be u64? - */ -u32 scic_cb_ssp_task_request_get_lun( - void *scic_user_task_request) -{ - return isci_task_ssp_request_get_lun( - (struct isci_request *)scic_user_task_request - ); -} - -/** - * scic_cb_ssp_task_request_get_function() - This method returns the task - * management function to be utilized for this task request. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns an unsigned byte representing the task management - * function to be performed. - */ -u8 scic_cb_ssp_task_request_get_function( - void *scic_user_task_request) -{ - return isci_task_ssp_request_get_function( - (struct isci_request *)scic_user_task_request - ); -} - -/** - * scic_cb_ssp_task_request_get_io_tag_to_manage() - This method returns the - * task management IO tag to be managed. Depending upon the task management - * function the value returned from this method may be ignored. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns an unsigned 16-bit word depicting the IO tag to be - * managed. - */ -u16 scic_cb_ssp_task_request_get_io_tag_to_manage( - void *scic_user_task_request) -{ - return isci_task_ssp_request_get_io_tag_to_manage( - (struct isci_request *)scic_user_task_request - ); -} - -/** - * scic_cb_ssp_task_request_get_response_data_address() - This callback method - * asks the user to provide the virtual address of the response data buffer - * for the supplied IO request. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the virtual address for the response data buffer - * associated with this IO request. - */ -void *scic_cb_ssp_task_request_get_response_data_address( - void *scic_user_task_request) -{ - return isci_task_ssp_request_get_response_data_address( - (struct isci_request *)scic_user_task_request - ); -} - -/** - * scic_cb_ssp_task_request_get_response_data_length() - This callback method - * asks the user to provide the length of the response data buffer for the - * supplied IO request. - * @scic_user_task_request: This parameter points to the user's task request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns the length of the response buffer data associated with - * this IO request. - */ -u32 scic_cb_ssp_task_request_get_response_data_length( - void *scic_user_task_request) -{ - return isci_task_ssp_request_get_response_data_length( - (struct isci_request *)scic_user_task_request - ); -} - -#if !defined(DISABLE_ATAPI) -/** - * scic_cb_stp_packet_io_request_get_cdb_address() - This user callback asks - * the user to provide stp packet io's the CDB address. - * @scic_user_io_request: - * - * The packet IO's cdb adress. - */ -void *scic_cb_stp_packet_io_request_get_cdb_address( - void *scic_user_io_request) -{ - return isci_request_stp_packet_io_request_get_cdb_address( - scic_user_io_request - ); -} - - -/** - * scic_cb_stp_packet_io_request_get_cdb_length() - This user callback asks the - * user to provide stp packet io's the CDB length. - * @scic_user_io_request: - * - * The packet IO's cdb length. - */ -u32 scic_cb_stp_packet_io_request_get_cdb_length( - void *scic_user_io_request) -{ - return isci_request_stp_packet_io_request_get_cdb_length( - scic_user_io_request - ); -} -#endif /* #if !defined(DISABLE_ATAPI) */ - - -/** - * scic_cb_io_request_do_copy_rx_frames() - This callback method asks the user - * if the received RX frame data is to be copied to the SGL or should be - * stored by the SCI core to be retrieved later with the - * scic_io_request_get_rx_frame(). - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns true if the SCI core should copy the received frame data - * to the SGL location or false if the SCI user wants to retrieve the frame - * data at a later time. - */ -bool scic_cb_io_request_do_copy_rx_frames( - void *scic_user_io_request) -{ - struct sas_task *task - = isci_request_access_task( - (struct isci_request *)scic_user_io_request - ); - - return (task->data_dir == DMA_NONE) ? false : true; -} - -/** - * scic_cb_get_virtual_address() - This callback method asks the user to - * provide the virtual address for the supplied physical address. - * @controller: This parameter is the core controller object handle. - * @physical_address: This parameter is the physical address which is to be - * returned as a virtual address. - * - * The method returns the virtual address for the supplied physical address. - */ -void *scic_cb_get_virtual_address( - struct scic_sds_controller *controller, - dma_addr_t physical_address) -{ - void *virt_addr = (void *)phys_to_virt(physical_address); - - return virt_addr; -} - -/** - * scic_cb_request_get_sat_protocol() - This callback method asks the user to - * return the SAT protocol definition for this IO request. This method is - * only called by the SCI core if the request type constructed is SATA. - * @scic_user_io_request: This parameter points to the user's IO request - * object. It is a cookie that allows the user to provide the necessary - * information for this callback. - * - * This method returns one of the sat.h defined protocols for the given io - * request. - */ -u8 scic_cb_request_get_sat_protocol( - void *scic_user_io_request) -{ - return isci_sata_get_sat_protocol( - (struct isci_request *)scic_user_io_request - ); -} diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 26768c5..06154a6 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -61,7 +61,6 @@ /*#include "task.h"*/ #include "timers.h" #include "remote_device.h" -#include "scic_user_callback.h" #define DRV_NAME "isci" #define SCI_PCI_BAR_COUNT 2 diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 9ec91f8..9b9aa50 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -86,6 +86,8 @@ #include "sci_status.h" #include "request.h" #include "events.h" +#include "task.h" +#include "sata.h" extern struct kmem_cache *isci_kmem_cache; extern struct isci_firmware *isci_firmware; diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index a208f81..48e37cf 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -55,7 +55,6 @@ #if !defined(_ISCI_REMOTE_DEVICE_H_) #define _ISCI_REMOTE_DEVICE_H_ -#include "scic_user_callback.h" struct isci_host; struct scic_sds_remote_device; diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 19b0eea..6fbf159 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -324,7 +324,7 @@ int isci_task_send_lu_reset_sata( /* Leave SRST high for a bit. */ #define ISCI_SRST_ASSERT_DELAY 100 /* usecs */ - scic_cb_stall_execution(ISCI_SRST_ASSERT_DELAY); + udelay(ISCI_SRST_ASSERT_DELAY); /* Deassert SRST. */ isci_task_build_tmf(&tmf, isci_device, isci_tmf_sata_srst_low, -- cgit v0.10.2 From 150fc6fc725055b400a8865e6785dc8dd0a2225d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 25 Feb 2011 10:25:21 -0800 Subject: isci: fix sas address reporting Undo the open coded and incorrect translation of the oem parameter sas address to its libsas expected format. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index aa86615..d8d6f67b 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -517,11 +517,6 @@ int isci_host_init(struct isci_host *isci_host) for (index = 0; index < SCI_MAX_PHYS; index++) isci_phy_init(&isci_host->phys[index], isci_host, index); - /* Why are we doing this? Is this even necessary? */ - memcpy(&isci_host->sas_addr[0], - &isci_host->phys[0].sas_addr[0], - SAS_ADDR_SIZE); - /* Start the ports */ for (index = 0; index < SCI_MAX_PORTS; index++) { scic_controller_get_port_handle(controller, index, &scic_port); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 06154a6..b794dfd 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -105,7 +105,6 @@ struct isci_host { spinlock_t state_lock; struct pci_dev *pdev; - u8 sas_addr[SAS_ADDR_SIZE]; enum isci_status status; #define IHOST_START_PENDING 0 diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 6ca623a..d01c44f 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -209,7 +209,7 @@ static int isci_register_sas_ha(struct isci_host *isci_host) sas_ha->sas_ha_name = DRV_NAME; sas_ha->lldd_module = THIS_MODULE; - sas_ha->sas_addr = &(isci_host->sas_addr[0]); + sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0]; /* set the array of phy and port structs. */ for (i = 0; i < SCI_MAX_PHYS; i++) { diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index fbda570..1eefaae 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -75,14 +75,15 @@ void isci_phy_init( struct isci_host *isci_host, int index) { - struct scic_sds_controller *controller = isci_host->core_controller; + struct scic_sds_controller *scic = isci_host->core_controller; struct scic_sds_phy *scic_phy; - union scic_oem_parameters oem_parameters; + union scic_oem_parameters oem; enum sci_status status = SCI_SUCCESS; + u64 sas_addr; /*--------------- SCU_Phy Initialization Stuff -----------------------*/ - status = scic_controller_get_phy_handle(controller, index, &scic_phy); + status = scic_controller_get_phy_handle(scic, index, &scic_phy); if (status == SCI_SUCCESS) { sci_object_set_association(scic_phy, (void *)phy); phy->sci_phy_handle = scic_phy; @@ -90,24 +91,13 @@ void isci_phy_init( dev_err(&isci_host->pdev->dev, "failed scic_controller_get_phy_handle\n"); - scic_oem_parameters_get(controller, &oem_parameters); - - phy->sas_addr[0] = oem_parameters.sds1.phys[index].sas_address.low - & 0xFF; - phy->sas_addr[1] = (oem_parameters.sds1.phys[index].sas_address.low - >> 8) & 0xFF; - phy->sas_addr[2] = (oem_parameters.sds1.phys[index].sas_address.low - >> 16) & 0xFF; - phy->sas_addr[3] = (oem_parameters.sds1.phys[index].sas_address.low - >> 24) & 0xFF; - phy->sas_addr[4] = oem_parameters.sds1.phys[index].sas_address.high - & 0xFF; - phy->sas_addr[5] = (oem_parameters.sds1.phys[index].sas_address.high - >> 8) & 0xFF; - phy->sas_addr[6] = (oem_parameters.sds1.phys[index].sas_address.high - >> 16) & 0xFF; - phy->sas_addr[7] = (oem_parameters.sds1.phys[index].sas_address.high - >> 24) & 0xFF; + scic_oem_parameters_get(scic, &oem); + sas_addr = oem.sds1.phys[index].sas_address.high; + sas_addr <<= 32; + sas_addr |= oem.sds1.phys[index].sas_address.low; + swab64s(&sas_addr); + + memcpy(phy->sas_addr, &sas_addr, sizeof(sas_addr)); phy->isci_port = NULL; phy->sas_phy.enabled = 0; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 446da20..30da3ec 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -192,6 +192,7 @@ void isci_port_link_up( scic_port_get_properties(port, &properties); if (properties.remote.protocols.u.bits.stp_target) { + u64 attached_sas_address; struct scic_sata_phy_properties sata_phy_properties; @@ -220,17 +221,13 @@ void isci_port_link_up( * will not be the same as assigned to the PHY and needs * to be obtained from struct scic_port_properties properties. */ + attached_sas_address = properties.remote.sas_address.high; + attached_sas_address <<= 32; + attached_sas_address |= properties.remote.sas_address.low; + swab64s(&attached_sas_address); - BUG_ON(((size_t)SAS_ADDR_SIZE / 2) - != sizeof(properties.remote.sas_address.low)); - - memcpy(&isci_phy->sas_phy.attached_sas_addr[0], - &properties.remote.sas_address.low, - SAS_ADDR_SIZE / 2); - - memcpy(&isci_phy->sas_phy.attached_sas_addr[4], - &properties.remote.sas_address.high, - SAS_ADDR_SIZE / 2); + memcpy(&isci_phy->sas_phy.attached_sas_addr, + &attached_sas_address, sizeof(attached_sas_address)); } else if (properties.remote.protocols.u.bits.ssp_target || properties.remote.protocols.u.bits.smp_target) { -- cgit v0.10.2 From 7c40a8035815479c7c12ab0cdcea71e0f4c3a9c8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 2 Mar 2011 11:49:26 -0800 Subject: isci: rework timer api Prepare the timer api for the arrival of dynamic creation and destruction events from the core. It pretended to do this previously but the core to date only used it in a static init-time only fashion. This is an interim fix until a cleaner event queue can be developed. 1/ make all locking external to the api (add WARN_ONCE to verify) 2/ add a timer_destroy interface (to be used by the core) 3/ use del_timer_sync() prior to deallocating timer data 4/ delete the "timer_list" indirection, we only have timers allocated for the isci_host 5/ fix detection of timer list allocation errors Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/events.c b/drivers/scsi/isci/events.c index 8872f4c..c5cbaed 100644 --- a/drivers/scsi/isci/events.c +++ b/drivers/scsi/isci/events.c @@ -75,35 +75,23 @@ * whenever the timer expires. * @controller: This parameter specifies the controller with which this timer * is to be associated. - * @cookie: This parameter specifies a piece of information that the user must - * retain. This cookie is to be supplied by the user anytime a timeout - * occurs for the created timer. + * @cb_param: opaque callback parameter * * This method returns a handle to a timer object created by the user. The * handle will be utilized for all further interactions relating to this timer. */ -void *isci_event_timer_create( - struct scic_sds_controller *controller, - void (*timer_callback)(void *), - void *cookie) +void *isci_event_timer_create(struct scic_sds_controller *scic, + void (*timer_callback)(void *), + void *cb_param) { - struct isci_host *isci_host; - struct isci_timer *timer = NULL; - - isci_host = (struct isci_host *)sci_object_get_association(controller); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_timer *itimer; - dev_dbg(&isci_host->pdev->dev, - "%s: isci_host = %p", - __func__, isci_host); - - timer = isci_timer_create(&isci_host->timer_list_struct, - isci_host, - cookie, - timer_callback); + itimer = isci_timer_create(ihost, cb_param, timer_callback); - dev_dbg(&isci_host->pdev->dev, "%s: timer = %p\n", __func__, timer); + dev_dbg(&ihost->pdev->dev, "%s: timer = %p\n", __func__, itimer); - return (void *)timer; + return itimer; } @@ -146,14 +134,9 @@ void isci_event_timer_start( * @timer: This parameter specifies the timer to be stopped. * */ -void isci_event_timer_stop( - struct scic_sds_controller *controller, - void *timer) +void isci_event_timer_stop(struct scic_sds_controller *controller, void *timer) { - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); + struct isci_host *isci_host = sci_object_get_association(controller); dev_dbg(&isci_host->pdev->dev, "%s: isci_host = %p, timer = %p\n", @@ -162,6 +145,16 @@ void isci_event_timer_stop( isci_timer_stop((struct isci_timer *)timer); } +void isci_event_timer_destroy(struct scic_sds_controller *scic, void *timer) +{ + struct isci_host *ihost = sci_object_get_association(scic); + + dev_dbg(&ihost->pdev->dev, "%s: ihost = %p, timer = %p\n", + __func__, ihost, timer); + + isci_del_timer(ihost, timer); +} + /** * isci_event_controller_start_complete() - This user callback will inform the * user that the controller has finished the start process. The associated diff --git a/drivers/scsi/isci/events.h b/drivers/scsi/isci/events.h index 98526e9..fa2f6aa 100644 --- a/drivers/scsi/isci/events.h +++ b/drivers/scsi/isci/events.h @@ -111,6 +111,9 @@ void isci_event_timer_stop( struct scic_sds_controller *controller, void *timer); + +void isci_event_timer_destroy(struct scic_sds_controller *scic, void *timer); + /** * isci_event_controller_start_complete() - This user callback will inform the * user that the controller has finished the start process. diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index d8d6f67b..1bc91f2 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -349,9 +349,14 @@ void isci_host_deinit(struct isci_host *ihost) } set_bit(IHOST_STOP_PENDING, &ihost->flags); + + spin_lock_irq(&ihost->scic_lock); scic_controller_stop(scic, SCIC_CONTROLLER_STOP_TIMEOUT); + spin_unlock_irq(&ihost->scic_lock); + wait_for_stop(ihost); scic_controller_reset(scic); + isci_timer_list_destroy(ihost); } static void __iomem *scu_base(struct isci_host *isci_host) @@ -370,8 +375,6 @@ static void __iomem *smu_base(struct isci_host *isci_host) return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id; } -#define SCI_MAX_TIMER_COUNT 25 - int isci_host_init(struct isci_host *isci_host) { int err = 0; @@ -382,11 +385,7 @@ int isci_host_init(struct isci_host *isci_host) union scic_oem_parameters scic_oem_params; union scic_user_parameters scic_user_params; - INIT_LIST_HEAD(&isci_host->timer_list_struct.timers); - isci_timer_list_construct( - &isci_host->timer_list_struct, - SCI_MAX_TIMER_COUNT - ); + isci_timer_list_construct(isci_host); controller = scic_controller_alloc(&isci_host->pdev->dev); @@ -473,7 +472,17 @@ int isci_host_init(struct isci_host *isci_host) } } + tasklet_init(&isci_host->completion_tasklet, + isci_host_completion_routine, (unsigned long)isci_host); + + INIT_LIST_HEAD(&(isci_host->mdl_struct_list)); + + INIT_LIST_HEAD(&isci_host->requests_to_complete); + INIT_LIST_HEAD(&isci_host->requests_to_abort); + + spin_lock_irq(&isci_host->scic_lock); status = scic_controller_initialize(isci_host->core_controller); + spin_unlock_irq(&isci_host->scic_lock); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, "%s: scic_controller_initialize failed -" @@ -482,17 +491,8 @@ int isci_host_init(struct isci_host *isci_host) return -ENODEV; } - tasklet_init(&isci_host->completion_tasklet, - isci_host_completion_routine, (unsigned long)isci_host); - - INIT_LIST_HEAD(&(isci_host->mdl_struct_list)); - - INIT_LIST_HEAD(&isci_host->requests_to_complete); - INIT_LIST_HEAD(&isci_host->requests_to_abort); - /* populate mdl with dma memory. scu_mdl_allocate_coherent() */ err = isci_host_mdl_allocate_coherent(isci_host); - if (err) return err; diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index b794dfd..ef3e7d1 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -87,7 +87,7 @@ struct isci_host { union scic_oem_parameters oem_parameters; int id; /* unique within a given pci device */ - struct isci_timer_list timer_list_struct; + struct list_head timers; void *core_ctrl_memory; struct dma_pool *dma_pool; unsigned int dma_pool_alloc_size; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 6f98f6c..232125e 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -475,14 +475,8 @@ int isci_task_execute_tmf( } /* Allocate the TMF timeout timer. */ - tmf->timeout_timer = isci_timer_create( - &isci_host->timer_list_struct, - isci_host, - request, - isci_tmf_timeout_cb - ); - spin_lock_irqsave(&isci_host->scic_lock, flags); + tmf->timeout_timer = isci_timer_create(isci_host, request, isci_tmf_timeout_cb); /* Start the timer. */ if (tmf->timeout_timer) @@ -557,9 +551,7 @@ int isci_task_execute_tmf( /* Clean up the timer if needed. */ if (tmf->timeout_timer) { - isci_timer_stop(tmf->timeout_timer); - isci_timer_free(&isci_host->timer_list_struct, - tmf->timeout_timer); + isci_del_timer(isci_host, tmf->timeout_timer); tmf->timeout_timer = NULL; } @@ -1468,10 +1460,7 @@ void isci_task_request_complete( /* Manage the timer if it is still running. */ if (tmf->timeout_timer) { - - isci_timer_stop(tmf->timeout_timer); - isci_timer_free(&isci_host->timer_list_struct, - tmf->timeout_timer); + isci_del_timer(isci_host, tmf->timeout_timer); tmf->timeout_timer = NULL; } diff --git a/drivers/scsi/isci/timers.c b/drivers/scsi/isci/timers.c index ca72308..f33eff0 100644 --- a/drivers/scsi/isci/timers.c +++ b/drivers/scsi/isci/timers.c @@ -56,96 +56,59 @@ #include "isci.h" #include "timers.h" - /** * isci_timer_list_construct() - This method contrucst the SCI Timer List * object used by the SCI Module class. The construction process involves * creating isci_timer objects and adding them to the SCI Timer List * object's list member. The number of isci_timer objects is determined by * the timer_list_size parameter. - * @isci_timer_list: This parameter points to the SCI Timer List object being - * constructed. The calling routine is responsible for allocating the memory - * for isci_timer_list and initializing the timer list_head member of - * isci_timer_list. - * @timer_list_size: This parameter specifies the number of isci_timer objects - * contained by the SCI Timer List. which this timer is to be associated. + * @ihost: container of the timer list * * This method returns an error code indicating sucess or failure. The user * should check for possible memory allocation error return otherwise, a zero * indicates success. */ -int isci_timer_list_construct( - struct isci_timer_list *isci_timer_list, - int timer_list_size) +int isci_timer_list_construct(struct isci_host *ihost) { - struct isci_timer *isci_timer; - int i; - int err = 0; - + struct isci_timer *itimer; + int i, err = 0; - for (i = 0; i < timer_list_size; i++) { - - isci_timer = kzalloc(sizeof(*isci_timer), GFP_KERNEL); - - if (!isci_timer) { + INIT_LIST_HEAD(&ihost->timers); + for (i = 0; i < SCI_MAX_TIMER_COUNT; i++) { + itimer = devm_kzalloc(&ihost->pdev->dev, sizeof(*itimer), GFP_KERNEL); + if (!itimer) { err = -ENOMEM; break; } - isci_timer->used = 0; - isci_timer->stopped = 1; - isci_timer->parent = isci_timer_list; - list_add(&isci_timer->node, &isci_timer_list->timers); + init_timer(&itimer->timer); + itimer->used = 0; + itimer->stopped = 1; + list_add(&itimer->node, &ihost->timers); } - return 0; - + return err; } - /** * isci_timer_list_destroy() - This method destroys the SCI Timer List object * used by the SCI Module class. The destruction process involves freeing * memory allocated for isci_timer objects on the SCI Timer List object's * timers list_head member. If any isci_timer objects are mark as "in use", * they are not freed and the function returns an error code of -EBUSY. - * @isci_timer_list: This parameter points to the SCI Timer List object being - * destroyed. - * - * This method returns an error code indicating sucess or failure. The user - * should check for possible -EBUSY error return, in the event of one or more - * isci_timers still "in use", otherwise, a zero indicates success. + * @ihost: container of the list to be destroyed */ -int isci_timer_list_destroy( - struct isci_timer_list *isci_timer_list) +void isci_timer_list_destroy(struct isci_host *ihost) { - struct isci_timer *timer, *tmp; - - list_for_each_entry_safe(timer, tmp, &isci_timer_list->timers, node) { - isci_timer_free(isci_timer_list, timer); - list_del(&timer->node); - kfree(timer); - } - return 0; -} + struct isci_timer *timer; + LIST_HEAD(list); + spin_lock_irq(&ihost->scic_lock); + list_splice_init(&ihost->timers, &list); + spin_unlock_irq(&ihost->scic_lock); - -static void isci_timer_restart(struct isci_timer *isci_timer) -{ - struct timer_list *timer = - &isci_timer->timer; - unsigned long timeout; - - dev_dbg(&isci_timer->isci_host->pdev->dev, - "%s: isci_timer = %p\n", __func__, isci_timer); - - isci_timer->restart = 0; - isci_timer->stopped = 0; - timeout = isci_timer->timeout_value; - timeout = (timeout * HZ) / 1000; - timeout = timeout ? timeout : 1; - mod_timer(timer, jiffies + timeout); + list_for_each_entry(timer, &list, node) + del_timer_sync(&timer->timer); } /** @@ -169,7 +132,7 @@ static void isci_timer_restart(struct isci_timer *isci_timer) static void timer_function(unsigned long data) { - struct isci_timer *timer = (struct isci_timer *)data; + struct isci_timer *timer = (struct isci_timer *)data; struct isci_host *isci_host = timer->isci_host; unsigned long flags; @@ -185,89 +148,66 @@ static void timer_function(unsigned long data) if (!timer->stopped) { timer->stopped = 1; - timer->timer_callback(timer->cookie); - - if (timer->restart) - isci_timer_restart(timer); + timer->timer_callback(timer->cb_param); } spin_unlock_irqrestore(&isci_host->scic_lock, flags); } -struct isci_timer *isci_timer_create( - struct isci_timer_list *isci_timer_list, - struct isci_host *isci_host, - void *cookie, - void (*timer_callback)(void *)) +struct isci_timer *isci_timer_create(struct isci_host *ihost, void *cb_param, + void (*timer_callback)(void *)) { - struct timer_list *timer; struct isci_timer *isci_timer; - struct list_head *timer_list = - &isci_timer_list->timers; - unsigned long flags; + struct list_head *list = &ihost->timers; - spin_lock_irqsave(&isci_host->scic_lock, flags); + WARN_ONCE(!spin_is_locked(&ihost->scic_lock), + "%s: unlocked!\n", __func__); - if (list_empty(timer_list)) { - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + if (WARN_ONCE(list_empty(list), "%s: timer pool empty\n", __func__)) return NULL; - } - isci_timer = list_entry(timer_list->next, struct isci_timer, node); + isci_timer = list_entry(list->next, struct isci_timer, node); - if (isci_timer->used) { - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - return NULL; - } isci_timer->used = 1; isci_timer->stopped = 1; - list_move_tail(&isci_timer->node, timer_list); - - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + /* FIXME: what!? we recycle the timer, rather than take it off + * the free list? + */ + list_move_tail(&isci_timer->node, list); timer = &isci_timer->timer; timer->data = (unsigned long)isci_timer; timer->function = timer_function; - isci_timer->cookie = cookie; + isci_timer->cb_param = cb_param; isci_timer->timer_callback = timer_callback; - isci_timer->isci_host = isci_host; + isci_timer->isci_host = ihost; - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: isci_timer = %p\n", __func__, isci_timer); return isci_timer; } -/** - * isci_timer_free() - This method frees the isci_timer, marking it "free to +/* isci_del_timer() - This method frees the isci_timer, marking it "free to * use", then places its back at the head of the timers list for the SCI * Timer List object specified. - * @isci_timer_list: This parameter points to the SCI Timer List from which the - * timer is reserved. - * @isci_timer: This parameter specifies the timer to be freed. - * */ -void isci_timer_free( - struct isci_timer_list *isci_timer_list, - struct isci_timer *isci_timer) +void isci_del_timer(struct isci_host *ihost, struct isci_timer *isci_timer) { - struct list_head *timer_list = &isci_timer_list->timers; + struct list_head *list = &ihost->timers; + + WARN_ONCE(!spin_is_locked(&ihost->scic_lock), + "%s unlocked!\n", __func__); dev_dbg(&isci_timer->isci_host->pdev->dev, "%s: isci_timer = %p\n", __func__, isci_timer); - if (list_empty(timer_list)) - return; - isci_timer->used = 0; - list_move(&isci_timer->node, timer_list); - - if (!isci_timer->stopped) { - del_timer(&isci_timer->timer); - isci_timer->stopped = 1; - } + list_move(&isci_timer->node, list); + del_timer(&isci_timer->timer); + isci_timer->stopped = 1; } /** @@ -278,26 +218,15 @@ void isci_timer_free( * the associated callback function will be called. * */ -void isci_timer_start( - struct isci_timer *isci_timer, - unsigned long timeout) +void isci_timer_start(struct isci_timer *isci_timer, unsigned long tmo) { struct timer_list *timer = &isci_timer->timer; dev_dbg(&isci_timer->isci_host->pdev->dev, "%s: isci_timer = %p\n", __func__, isci_timer); - isci_timer->timeout_value = timeout; - init_timer(timer); - timeout = (timeout * HZ) / 1000; - timeout = timeout ? timeout : 1; - - timer->expires = jiffies + timeout; - timer->data = (unsigned long)isci_timer; - timer->function = timer_function; isci_timer->stopped = 0; - isci_timer->restart = 0; - add_timer(timer); + mod_timer(timer, jiffies + msecs_to_jiffies(tmo)); } /** @@ -310,10 +239,6 @@ void isci_timer_stop(struct isci_timer *isci_timer) dev_dbg(&isci_timer->isci_host->pdev->dev, "%s: isci_timer = %p\n", __func__, isci_timer); - if (isci_timer->stopped) - return; - isci_timer->stopped = 1; - del_timer(&isci_timer->timer); } diff --git a/drivers/scsi/isci/timers.h b/drivers/scsi/isci/timers.h index ca5c215..8d8a892 100644 --- a/drivers/scsi/isci/timers.h +++ b/drivers/scsi/isci/timers.h @@ -59,68 +59,30 @@ #include #include -/*************************************************** - * isci_timer - *************************************************** - */ -/** - * struct isci_timer_list - This class is the container for all isci_timer - * objects - * - * - */ -struct isci_timer_list { - - struct list_head timers; -}; +#define SCI_MAX_TIMER_COUNT 25 /** * struct isci_timer - This class represents the timer object used by SCIC. It - * wraps the Linux timer_list object. - * + * wraps the Linux timer_list object, and (TODO) should be removed in favor + * of a delayed-workqueue style interface with simpler locking * */ struct isci_timer { int used; int stopped; - int restart; - int timeout_value; - void *cookie; + void *cb_param; void (*timer_callback)(void *); struct list_head node; struct timer_list timer; - struct isci_timer_list *parent; struct isci_host *isci_host; }; -#define to_isci_timer(t) \ - container_of(t, struct isci_timer, timer); - -int isci_timer_list_construct( - struct isci_timer_list *isci_timer_list, - int timer_list_size); - - -int isci_timer_list_destroy( - struct isci_timer_list *isci_timer_list); - -struct isci_timer *isci_timer_create( - struct isci_timer_list *isci_timer_list, - struct isci_host *isci_host, - void *cookie, - void (*timer_callback)(void *)); - -void isci_timer_free( - struct isci_timer_list *isci_timer_list, - struct isci_timer *isci_timer); - -void isci_timer_start( - struct isci_timer *isci_timer, - unsigned long timeout); - -void isci_timer_stop( - struct isci_timer *isci_timer); - +int isci_timer_list_construct(struct isci_host *ihost); +void isci_timer_list_destroy(struct isci_host *ihost); +struct isci_timer *isci_timer_create(struct isci_host *ihost, void *cb_param, + void (*timer_callback)(void *)); +void isci_del_timer(struct isci_host *ihost, struct isci_timer *itimer); +void isci_timer_start(struct isci_timer *isci_timer, unsigned long timeout); +void isci_timer_stop(struct isci_timer *isci_timer); #endif /* !defined (_SCI_TIMER_H_) */ - -- cgit v0.10.2 From a8d4b9fe911c7d48f7a75c37eb1bfa3273547d97 Mon Sep 17 00:00:00 2001 From: Tomasz Chudy Date: Fri, 25 Feb 2011 02:25:09 -0800 Subject: isci: workaround port task scheduler starvation issue There is a condition whereby TCs (task contexts) can jump to the head of the round robin queue causing indefinite starvation of pending tasks. Posting a TC to a suspended RNC (remote node context) causes the hardware to select that task first, but since the RNC is suspended the scheduler proceeds to the next task in the expected round robin fashion, restoring TC arbitration fairness. Signed-off-by: Tomasz Chudy Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index e55abb6..8222443 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -147,23 +147,6 @@ enum sci_status scic_port_get_properties( struct scic_sds_port *port, struct scic_port_properties *properties); - - -/** - * scic_port_start() - This method will make the port ready for operation. - * Prior to calling the start method IO operation is not possible. - * @port: This parameter specifies the port to be started. - * - * Indicate if the port was successfully started. SCI_SUCCESS This value is - * returned if the port was successfully started. SCI_WARNING_ALREADY_IN_STATE - * This value is returned if the port is in the process of starting. - * SCI_FAILURE_INVALID_PORT This value is returned if the supplied port is not - * valid. SCI_FAILURE_INVALID_STATE This value is returned if a start operation - * can't be completed due to the state of port. - */ -enum sci_status scic_port_start( - struct scic_sds_port *port); - /** * scic_port_stop() - This method will make the port no longer ready for * operation. After invoking this method IO operation is not possible. diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index d642ff7..5e26df7 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -796,7 +796,11 @@ enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) enum sci_status status = SCI_SUCCESS; for (index = 0; index < scic->logical_port_entries; index++) { - port_status = scic_port_stop(&scic->port_table[index]); + struct scic_sds_port *sci_port = &scic->port_table[index]; + SCI_BASE_PORT_HANDLER_T stop; + + stop = sci_port->state_handlers->parent.stop_handler; + port_status = stop(&sci_port->parent); if ((port_status != SCI_SUCCESS) && (port_status != SCI_FAILURE_INVALID_STATE)) { @@ -806,7 +810,7 @@ enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) "%s: Controller stop operation failed to " "stop port %d because of status %d.\n", __func__, - scic->port_table[index].logical_port_index, + sci_port->logical_port_index, port_status); } } @@ -3003,7 +3007,7 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( scic_sds_controller_ram_initialization(this_controller); } - if (SCI_SUCCESS == result) { + if (result == SCI_SUCCESS) { /* Build the TCi free pool */ sci_pool_initialize(this_controller->tci_pool); for (index = 0; index < this_controller->task_context_entries; index++) { @@ -3017,7 +3021,7 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( ); } - if (SCI_SUCCESS == result) { + if (result == SCI_SUCCESS) { /* * Before anything else lets make sure we will not be interrupted * by the hardware. */ @@ -3036,7 +3040,15 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( scic_sds_controller_initialize_unsolicited_frame_queue(this_controller); } - if (SCI_SUCCESS == result) { + /* Start all of the ports on this controller */ + for (index = 0; index < this_controller->logical_port_entries && + result == SCI_SUCCESS; index++) { + struct scic_sds_port *sci_port = &this_controller->port_table[index]; + + result = sci_port->state_handlers->parent.start_handler(&sci_port->parent); + } + + if (result == SCI_SUCCESS) { scic_sds_controller_start_next_phy(this_controller); isci_event_timer_start(this_controller, diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index d374c7a..2a193d3 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -67,6 +67,7 @@ #include "scic_sds_remote_node_context.h" #include "scic_sds_request.h" #include "sci_environment.h" +#include "scic_sds_controller_registers.h" static void scic_sds_port_invalid_link_up( @@ -78,6 +79,7 @@ static void scic_sds_port_timeout_handler( #define SCIC_SDS_PORT_MAX_TIMER_COUNT (SCI_MAX_PORTS) #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) +#define SCU_DUMMY_INDEX (0xFFFF) void sci_base_port_construct( struct sci_base_port *base_port, @@ -474,67 +476,131 @@ void scic_sds_port_get_attached_protocols( } /** - * This method returns the amount of memory requred for a port object. + * scic_sds_port_construct_dummy_rnc() - create dummy rnc for si workaround * - * u32 - */ - -/** - * This method returns the minimum number of timers required for all port - * objects. + * @sci_port: logical port on which we need to create the remote node context + * @rni: remote node index for this remote node context. * - * u32 + * This routine will construct a dummy remote node context data structure + * This structure will be posted to the hardware to work around a scheduler + * error in the hardware. */ +void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni) +{ + union scu_remote_node_context *rnc; -/** - * This method returns the maximum number of timers required for all port - * objects. - * - * u32 - */ + rnc = &sci_port->owning_controller->remote_node_context_table[rni]; + + memset(rnc, 0, sizeof(union scu_remote_node_context)); + + rnc->ssp.remote_sas_address_hi = 0; + rnc->ssp.remote_sas_address_lo = 0; + + rnc->ssp.remote_node_index = rni; + rnc->ssp.remote_node_port_width = 1; + rnc->ssp.logical_port_index = sci_port->physical_port_index; + + rnc->ssp.nexus_loss_timer_enable = false; + rnc->ssp.check_bit = false; + rnc->ssp.is_valid = true; + rnc->ssp.is_remote_node_context = true; + rnc->ssp.function_number = 0; + rnc->ssp.arbitration_wait_time = 0; +} /** + * scic_sds_port_construct_dummy_task() - create dummy task for si workaround + * @sci_port The logical port on which we need to create the + * remote node context. + * context. + * @tci The remote node index for this remote node context. * - * @this_port: - * @port_index: - * + * This routine will construct a dummy task context data structure. This + * structure will be posted to the hardwre to work around a scheduler error + * in the hardware. * */ -void scic_sds_port_construct( - struct scic_sds_port *this_port, - u8 port_index, - struct scic_sds_controller *owning_controller) +void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci) +{ + struct scu_task_context *task_context; + + task_context = scic_sds_controller_get_task_context_buffer(sci_port->owning_controller, tci); + + memset(task_context, 0, sizeof(struct scu_task_context)); + + task_context->abort = 0; + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = 1; + task_context->protocol_engine_index = 0; + task_context->logical_port_index = sci_port->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->task_index = scic_sds_io_tag_get_index(tci); + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = sci_port->reserved_rni; + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + + task_context->task_phase = 0x01; +} + +void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + + if (sci_port->reserved_tci != SCU_DUMMY_INDEX) + scic_controller_free_io_tag(scic, sci_port->reserved_tci); + + if (sci_port->reserved_rni != SCU_DUMMY_INDEX) + scic_sds_remote_node_table_release_remote_node_index(&scic->available_remote_nodes, + 1, sci_port->reserved_rni); + + sci_port->reserved_rni = SCU_DUMMY_INDEX; + sci_port->reserved_tci = SCU_DUMMY_INDEX; +} + +void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, + struct scic_sds_controller *scic) { u32 index; - sci_base_port_construct( - &this_port->parent, - scic_sds_port_state_table - ); + sci_base_port_construct(&sci_port->parent, scic_sds_port_state_table); sci_base_state_machine_construct( - scic_sds_port_get_ready_substate_machine(this_port), - &this_port->parent.parent, + scic_sds_port_get_ready_substate_machine(sci_port), + &sci_port->parent.parent, scic_sds_port_ready_substate_table, SCIC_SDS_PORT_READY_SUBSTATE_WAITING ); - this_port->logical_port_index = SCIC_SDS_DUMMY_PORT; - this_port->physical_port_index = port_index; - this_port->active_phy_mask = 0; + sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; + sci_port->physical_port_index = port_index; + sci_port->active_phy_mask = 0; - this_port->owning_controller = owning_controller; + sci_port->owning_controller = scic; - this_port->started_request_count = 0; - this_port->assigned_device_count = 0; + sci_port->started_request_count = 0; + sci_port->assigned_device_count = 0; - this_port->timer_handle = NULL; + sci_port->reserved_rni = SCU_DUMMY_INDEX; + sci_port->reserved_tci = SCU_DUMMY_INDEX; - this_port->port_task_scheduler_registers = NULL; + sci_port->timer_handle = NULL; - for (index = 0; index < SCI_MAX_PHYS; index++) { - this_port->phy_table[index] = NULL; - } + sci_port->port_task_scheduler_registers = NULL; + + for (index = 0; index < SCI_MAX_PHYS; index++) + sci_port->phy_table[index] = NULL; } /** @@ -634,19 +700,11 @@ void scic_sds_port_general_link_up_handler( } } - -enum sci_status scic_port_start(struct scic_sds_port *port) -{ - return port->state_handlers->parent.start_handler(&port->parent); -} - - enum sci_status scic_port_stop(struct scic_sds_port *port) { return port->state_handlers->parent.stop_handler(&port->parent); } - enum sci_status scic_port_get_properties( struct scic_sds_port *port, struct scic_port_properties *prop) @@ -1542,6 +1600,58 @@ static void scic_sds_port_suspend_port_task_scheduler( } /** + * scic_sds_port_post_dummy_request() - post dummy/workaround request + * @sci_port: port to post task + * + * Prevent the hardware scheduler from posting new requests to the front + * of the scheduler queue causing a starvation problem for currently + * ongoing requests. + * + */ +void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) +{ + u32 command; + struct scu_task_context *task_context; + struct scic_sds_controller *scic = sci_port->owning_controller; + u16 tci = sci_port->reserved_tci; + + task_context = scic_sds_controller_get_task_context_buffer(scic, tci); + + task_context->abort = 0; + + command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + tci; + + scic_sds_controller_post_request(scic, command); +} + +/** + * This routine will abort the dummy request. This will alow the hardware to + * power down parts of the silicon to save power. + * + * @sci_port: The port on which the task must be aborted. + * + */ +void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + u16 tci = sci_port->reserved_tci; + struct scu_task_context *tc; + u32 command; + + tc = scic_sds_controller_get_task_context_buffer(scic, tci); + + tc->abort = 1; + + command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT | + sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + tci; + + scic_sds_controller_post_request(scic, command); +} + +/** * * @this_port: This is the struct scic_sds_port object to resume. * @@ -1584,6 +1694,12 @@ static void scic_sds_port_ready_substate_waiting_enter( scic_sds_port_suspend_port_task_scheduler(this_port); + /* Kill the dummy task for this port if it has not yet posted + * the hardware will treat this as a NOP and just return abort + * complete. + */ + scic_sds_port_abort_dummy_request(this_port); + this_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; if (this_port->active_phy_mask != 0) { @@ -1629,6 +1745,11 @@ static void scic_sds_port_ready_substate_operational_enter( scic_sds_port_update_viit_entry(this_port); scic_sds_port_resume_port_task_scheduler(this_port); + + /* Post the dummy task for the port so the hardware can schedule + * io correctly + */ + scic_sds_port_post_dummy_request(this_port); } /** @@ -2062,6 +2183,7 @@ static enum sci_status scic_sds_port_general_complete_io_handler( * **************************************************************************** */ /** + * scic_sds_port_stopped_state_start_handler() - stop a port from "started" * * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port * object. @@ -2075,13 +2197,14 @@ static enum sci_status scic_sds_port_general_complete_io_handler( * start request is successful and the struct scic_sds_port object has transitioned to * the SCI_BASE_PORT_STATE_READY. */ -static enum sci_status scic_sds_port_stopped_state_start_handler( - struct sci_base_port *port) +static enum sci_status scic_sds_port_stopped_state_start_handler(struct sci_base_port *base_port) { + struct scic_sds_port *sci_port = container_of(base_port, typeof(*sci_port), parent); + struct scic_sds_controller *scic = sci_port->owning_controller; + enum sci_status status = SCI_SUCCESS; u32 phy_mask; - struct scic_sds_port *this_port = (struct scic_sds_port *)port; - if (this_port->assigned_device_count > 0) { + if (sci_port->assigned_device_count > 0) { /* * / @todo This is a start failure operation because there are still * / devices assigned to this port. There must be no devices @@ -2089,22 +2212,56 @@ static enum sci_status scic_sds_port_stopped_state_start_handler( return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; } - phy_mask = scic_sds_port_get_phys(this_port); + sci_port->timer_handle = isci_event_timer_create(scic, + scic_sds_port_timeout_handler, + sci_port); - /* - * There are one or more phys assigned to this port. Make sure - * the port's phy mask is in fact legal and supported by the - * silicon. */ - if (scic_sds_port_is_phy_mask_valid(this_port, phy_mask) == true) { - sci_base_state_machine_change_state( - scic_sds_port_get_base_state_machine(this_port), - SCI_BASE_PORT_STATE_READY - ); + if (!sci_port->timer_handle) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; - return SCI_SUCCESS; + if (sci_port->reserved_rni == SCU_DUMMY_INDEX) { + u16 rni = scic_sds_remote_node_table_allocate_remote_node(&scic->available_remote_nodes, 1); + + if (rni != SCU_DUMMY_INDEX) + scic_sds_port_construct_dummy_rnc(sci_port, rni); + else + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + sci_port->reserved_rni = rni; + } + + if (sci_port->reserved_tci == SCU_DUMMY_INDEX) { + /* Allocate a TCI and remove the sequence nibble */ + u16 tci = scic_controller_allocate_io_tag(scic); + + if (tci != SCU_DUMMY_INDEX) + scic_sds_port_construct_dummy_task(sci_port, tci); + else + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + sci_port->reserved_tci = tci; + } + + if (status == SCI_SUCCESS) { + phy_mask = scic_sds_port_get_phys(sci_port); + + /* + * There are one or more phys assigned to this port. Make sure + * the port's phy mask is in fact legal and supported by the + * silicon. + */ + if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { + sci_base_state_machine_change_state( + scic_sds_port_get_base_state_machine(sci_port), + SCI_BASE_PORT_STATE_READY); + + return SCI_SUCCESS; + } else + status = SCI_FAILURE; } - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + if (status != SCI_SUCCESS) + scic_sds_port_destroy_dummy_resources(sci_port); + + return status; } /** @@ -2467,6 +2624,52 @@ static void scic_sds_port_disable_port_task_scheduler( scu_port_task_scheduler_write(this_port, control, pts_control_value); } +void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + u8 phys_index = sci_port->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = sci_port->reserved_rni; + u32 command; + + rnc = &scic->remote_node_context_table[rni]; + rnc->ssp.is_valid = true; + + command = SCU_CONTEXT_COMMAND_POST_RNC_32 | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + scic_sds_controller_post_request(scic, command); + + /* ensure hardware has seen the post rnc command and give it + * ample time to act before sending the suspend + */ + SMU_ISR_READ(scic); /* flush */ + udelay(10); + + command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + scic_sds_controller_post_request(scic, command); +} + +void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + u8 phys_index = sci_port->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = sci_port->reserved_rni; + u32 command; + + rnc = &scic->remote_node_context_table[rni]; + + rnc->ssp.is_valid = false; + + command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + scic_sds_controller_post_request(scic, command); +} + /* * ****************************************************************************** * * PORT STATE METHODS @@ -2562,6 +2765,9 @@ static void scic_sds_port_ready_state_enter( ); } + /* Post and suspend the dummy remote node context for this port. */ + scic_sds_port_post_dummy_remote_node(this_port); + /* Start the ready substate machine */ sci_base_state_machine_start( scic_sds_port_get_ready_substate_machine(this_port) @@ -2583,6 +2789,8 @@ static void scic_sds_port_ready_state_exit( this_port = (struct scic_sds_port *)object; sci_base_state_machine_stop(&this_port->ready_substate_machine); + + scic_sds_port_invalidate_dummy_remote_node(this_port); } /** @@ -2663,6 +2871,8 @@ static void scic_sds_port_stopping_state_exit( scic_sds_port_get_controller(this_port), this_port->timer_handle ); + + scic_sds_port_destroy_dummy_resources(this_port); } /** diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 3eb80cb..c98caef 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -73,6 +73,12 @@ #define SCIC_SDS_DUMMY_PORT 0xFF /** + * This constant defines the value utilized by SCI Components to indicate + * an invalid handle. + */ +#define SCI_INVALID_HANDLE 0x0 + +/** * enum SCIC_SDS_PORT_READY_SUBSTATES - * * This enumeration depicts all of the states for the core port ready substate @@ -134,6 +140,9 @@ struct scic_sds_port { */ u8 active_phy_mask; + u16 reserved_rni; + u16 reserved_tci; + /** * This field contains the count of the io requests started on this port * object. It is used to control controller shutdown. diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 1bc91f2..40614e9 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -381,7 +381,6 @@ int isci_host_init(struct isci_host *isci_host) int index = 0; enum sci_status status; struct scic_sds_controller *controller; - struct scic_sds_port *scic_port; union scic_oem_parameters scic_oem_params; union scic_user_parameters scic_user_params; @@ -517,11 +516,5 @@ int isci_host_init(struct isci_host *isci_host) for (index = 0; index < SCI_MAX_PHYS; index++) isci_phy_init(&isci_host->phys[index], isci_host, index); - /* Start the ports */ - for (index = 0; index < SCI_MAX_PORTS; index++) { - scic_controller_get_port_handle(controller, index, &scic_port); - scic_port_start(scic_port); - } - return 0; } -- cgit v0.10.2 From 3ff0121a704172aa4bca9c4026b419ddfe1921c8 Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Fri, 25 Feb 2011 13:07:38 -0800 Subject: isci: handle cases where a d2h fis is used report an ncq error Observed that some devices return a d2h fis, treat like an sdb error fis. Signed-off-by: Piotr Sawicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index 1d8d901..9a615f0 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -367,10 +367,27 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl ); if (status == SCI_SUCCESS) { - if ( - (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS) - && (frame_header->status & ATA_STATUS_REG_ERROR_BIT) - ) { + if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS && + (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { + this_device->not_ready_reason = + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + /* + * / @todo Check sactive and complete associated IO + * if any. + */ + + sci_base_state_machine_change_state( + &this_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR + ); + } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H && + (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { + + /* + * Some devices return D2H FIS when an NCQ error is detected. + * Treat this like an SDB error FIS ready reason. + */ this_device->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; -- cgit v0.10.2 From c658b109d3a9444293700471a278a741a1e5033d Mon Sep 17 00:00:00 2001 From: Pawel Marek Date: Tue, 1 Mar 2011 12:31:06 -0800 Subject: isci: controller stop/start fixes Core reworks to support stopping and re-starting the controller, lays the groundwork for phy disable / re-enable and fixes other bugs around port/phy setup/teardown. Signed-off-by: Pawel Marek Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 5e26df7..deee7eb 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -252,7 +252,7 @@ static void scic_sds_controller_phy_startup_timeout_handler( * * This method initializes the phy startup operations for controller start. */ -void scic_sds_controller_initialize_phy_startup( +enum sci_status scic_sds_controller_initialize_phy_startup( struct scic_sds_controller *this_controller) { this_controller->phy_startup_timer = isci_event_timer_create( @@ -261,8 +261,14 @@ void scic_sds_controller_initialize_phy_startup( this_controller ); - this_controller->next_phy_to_start = 0; - this_controller->phy_startup_timer_pending = false; + if (this_controller->phy_startup_timer == NULL) { + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + } else { + this_controller->next_phy_to_start = 0; + this_controller->phy_startup_timer_pending = false; + } + + return SCI_SUCCESS; } /** @@ -305,7 +311,7 @@ void scic_sds_controller_initialize_power_control( * to build the memory table. * */ -static void scic_sds_controller_build_memory_descriptor_table( +void scic_sds_controller_build_memory_descriptor_table( struct scic_sds_controller *this_controller) { sci_base_mde_construct( @@ -1699,6 +1705,91 @@ void scic_sds_controller_link_down( } /** + * This method is called by the remote device to inform the controller + * that this remote device has started. + * + */ + +void scic_sds_controller_remote_device_started( + struct scic_sds_controller *this_controller, + struct scic_sds_remote_device *the_device) +{ + u32 state; + scic_sds_controller_device_handler_t remote_device_started_handler; + + state = this_controller->parent.state_machine.current_state_id; + remote_device_started_handler = scic_sds_controller_state_handler_table[state].remote_device_started_handler; + + if (remote_device_started_handler != NULL) + remote_device_started_handler(this_controller, the_device); + else { + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller 0x%p remote device started event " + "from device 0x%p in unexpected state %d\n", + __func__, + this_controller, + the_device, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + this_controller))); + } +} + +/** + * This is a helper method to determine if any remote devices on this + * controller are still in the stopping state. + * + */ +bool scic_sds_controller_has_remote_devices_stopping( + struct scic_sds_controller *this_controller) +{ + u32 index; + + for (index = 0; index < this_controller->remote_node_entries; index++) { + if ((this_controller->device_table[index] != NULL) && + (this_controller->device_table[index]->parent.state_machine.current_state_id + == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)) + return true; + } + + return false; +} + +/** + * This method is called by the remote device to inform the controller + * object that the remote device has stopped. + * + */ + +void scic_sds_controller_remote_device_stopped( + struct scic_sds_controller *this_controller, + struct scic_sds_remote_device *the_device) +{ + + u32 state; + scic_sds_controller_device_handler_t remote_device_stopped_handler; + + state = this_controller->parent.state_machine.current_state_id; + remote_device_stopped_handler = scic_sds_controller_state_handler_table[state].remote_device_stopped_handler; + + if (remote_device_stopped_handler != NULL) + remote_device_stopped_handler(this_controller, the_device); + else { + dev_warn(scic_to_dev(this_controller), + "%s: SCIC Controller 0x%p remote device stopped event " + "from device 0x%p in unexpected state %d\n", + __func__, + this_controller, + the_device, + sci_base_state_machine_get_state( + scic_sds_controller_get_base_state_machine( + this_controller))); + } +} + + + +/** * This method will write to the SCU PCP register the request value. The method * is used to suspend/resume ports, devices, and phys. * @this_controller: @@ -3461,23 +3552,22 @@ static enum sci_status scic_sds_controller_stopping_state_complete_io_handler( * struct scic_sds_controller object. * @remote_device: This is struct sci_base_remote_device which is cast to a * struct scic_sds_remote_device object. - * @io_request: This is the struct sci_base_request which is cast to a - * SCIC_SDS_IO_REQUEST object. * * This method is called when the struct scic_sds_controller is in a stopping state - * and the complete task handler is called. - This function is not yet - * implemented enum sci_status SCI_FAILURE - */ - -/* - * ***************************************************************************** - * * STOPPED STATE HANDLERS - * ***************************************************************************** */ - -/* - * ***************************************************************************** - * * FAILED STATE HANDLERS - * ***************************************************************************** */ + * and the remote device has stopped. + **/ +void scic_sds_controller_stopping_state_device_stopped_handler( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *remote_device +) +{ + if (!scic_sds_controller_has_remote_devices_stopping(controller)) { + sci_base_state_machine_change_state( + &controller->parent.state_machine, + SCI_BASE_CONTROLLER_STATE_STOPPED + ); + } +} const struct scic_sds_controller_state_handler scic_sds_controller_state_handler_table[] = { [SCI_BASE_CONTROLLER_STATE_INITIAL] = { @@ -3537,6 +3627,7 @@ const struct scic_sds_controller_state_handler scic_sds_controller_state_handler .base.complete_io = scic_sds_controller_stopping_state_complete_io_handler, .base.continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, + .remote_device_stopped_handler = scic_sds_controller_stopping_state_device_stopped_handler, }, [SCI_BASE_CONTROLLER_STATE_STOPPED] = { .base.reset = scic_sds_controller_general_reset_handler, diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 3e0477d..9b8e55d 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -120,6 +120,7 @@ enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS { SCU_MAX_MDES }; + /** * * @@ -390,6 +391,11 @@ struct scic_sds_controller { typedef void (*scic_sds_controller_phy_handler_t)(struct scic_sds_controller *, struct scic_sds_port *, struct scic_sds_phy *); + +typedef void (*scic_sds_controller_device_handler_t)(struct scic_sds_controller *, + struct scic_sds_remote_device *); + + /** * struct scic_sds_controller_state_handler - * @@ -402,6 +408,8 @@ struct scic_sds_controller_state_handler { sci_base_controller_request_handler_t terminate_request; scic_sds_controller_phy_handler_t link_up; scic_sds_controller_phy_handler_t link_down; + scic_sds_controller_device_handler_t remote_device_started_handler; + scic_sds_controller_device_handler_t remote_device_stopped_handler; }; extern const struct scic_sds_controller_state_handler @@ -633,6 +641,23 @@ void scic_sds_controller_link_down( /* * ***************************************************************************** + * * CORE CONTROLLER REMOTE DEVICE MESSAGE PROCESSING + * ***************************************************************************** */ + +bool scic_sds_controller_has_remote_devices_stopping( + struct scic_sds_controller *this_controller); + +void scic_sds_controller_remote_device_started( + struct scic_sds_controller *this_controller, + struct scic_sds_remote_device *the_device); + +void scic_sds_controller_remote_device_stopped( + struct scic_sds_controller *this_controller, + struct scic_sds_remote_device *the_device); + + +/* + * ***************************************************************************** * * CORE CONTROLLER PRIVATE METHODS * ***************************************************************************** */ @@ -688,8 +713,10 @@ void scic_sds_controller_register_setup( void scic_sds_controller_reset_hardware( struct scic_sds_controller *this_controller); +enum sci_status scic_sds_controller_initialize_phy_startup( + struct scic_sds_controller *this_controller); -void scic_sds_controller_initialize_phy_startup( +void scic_sds_controller_build_memory_descriptor_table( struct scic_sds_controller *this_controller); #endif /* _SCIC_SDS_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index d4a5e38..ba9e557 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -257,7 +257,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, * restart the starting substate machine since we dont know what has actually * happening. */ -static void scic_sds_phy_sata_timeout(void *phy) +void scic_sds_phy_sata_timeout(void *phy) { struct scic_sds_phy *sci_phy = phy; @@ -303,6 +303,7 @@ void scic_sds_phy_construct( this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; this_phy->link_layer_registers = NULL; this_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; + this_phy->sata_timeout_timer = NULL; /* Clear out the identification buffer data */ memset(&this_phy->phy_type, 0, sizeof(this_phy->phy_type)); @@ -365,8 +366,8 @@ void scic_sds_phy_set_port( */ enum sci_status scic_sds_phy_initialize( struct scic_sds_phy *sci_phy, - struct scu_transport_layer_registers __iomem *transport_layer_registers, - struct scu_link_layer_registers __iomem *link_layer_registers) + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers) { /* Create the SIGNATURE FIS Timeout timer for this phy */ sci_phy->sata_timeout_timer = isci_event_timer_create( @@ -757,6 +758,23 @@ static void scic_sds_phy_restart_starting_state( ); } +/* **************************************************************************** + * SCIC SDS PHY general handlers + ************************************************************************** */ +static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( + struct sci_base_phy *phy) +{ + struct scic_sds_phy *this_phy; + this_phy = (struct scic_sds_phy *)phy; + + sci_base_state_machine_stop(&this_phy->starting_substate_machine); + + sci_base_state_machine_change_state(&phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + /* * ***************************************************************************** * * SCIC SDS PHY EVENT_HANDLERS @@ -1436,12 +1454,10 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_p return SCI_SUCCESS; } -/* --------------------------------------------------------------------------- */ - const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1450,7 +1466,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1459,7 +1475,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1477,7 +1493,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1486,7 +1502,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1495,7 +1511,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1504,7 +1520,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1513,7 +1529,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, @@ -1522,7 +1538,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, + .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .parent.reset_handler = scic_sds_phy_default_reset_handler, .parent.destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -2153,17 +2169,22 @@ enum sci_status scic_sds_phy_default_consume_power_handler( * start it. - The phy state machine is transitioned to the * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS */ -static enum sci_status scic_sds_phy_stopped_state_start_handler( - struct sci_base_phy *phy) +static enum sci_status scic_sds_phy_stopped_state_start_handler(struct sci_base_phy *phy) { struct scic_sds_phy *this_phy; this_phy = (struct scic_sds_phy *)phy; - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_STARTING - ); + /* Create the SIGNATURE FIS Timeout timer for this phy */ + this_phy->sata_timeout_timer = isci_event_timer_create( + scic_sds_phy_get_controller(this_phy), + scic_sds_phy_sata_timeout, this_phy); + + if (this_phy->sata_timeout_timer != NULL) { + sci_base_state_machine_change_state( + scic_sds_phy_get_base_state_machine(this_phy), + SCI_BASE_PHY_STATE_STARTING); + } return SCI_SUCCESS; } @@ -2185,7 +2206,7 @@ static enum sci_status scic_sds_phy_stopped_state_destroy_handler( this_phy = (struct scic_sds_phy *)phy; - /* / @todo what do we actually need to do here? */ + /* @todo what do we actually need to do here? */ return SCI_SUCCESS; } @@ -2500,7 +2521,7 @@ static void scic_sds_phy_initial_state_enter( this_phy = (struct scic_sds_phy *)object; - scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_STOPPED); + scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_INITIAL); } /** @@ -2512,18 +2533,24 @@ static void scic_sds_phy_initial_state_enter( * handlers for the phy object base state machine initial state. - The SCU * hardware is requested to stop the protocol engine. none */ -static void scic_sds_phy_stopped_state_enter( - struct sci_base_object *object) +static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; /* / @todo We need to get to the controller to place this PE in a reset state */ - scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_STOPPED); + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STOPPED); - scu_link_layer_stop_protocol_engine(this_phy); + if (sci_phy->sata_timeout_timer != NULL) { + isci_event_timer_destroy(scic_sds_phy_get_controller(sci_phy), + sci_phy->sata_timeout_timer); + + sci_phy->sata_timeout_timer = NULL; + } + + scu_link_layer_stop_protocol_engine(sci_phy); } /** diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index dc450c3..b611e33 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -401,6 +401,9 @@ enum sci_status scic_sds_phy_stop( enum sci_status scic_sds_phy_reset( struct scic_sds_phy *this_phy); +void scic_sds_phy_sata_timeout( + void *cookie); + /* --------------------------------------------------------------------------- */ void scic_sds_phy_suspend( diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 2a193d3..410c9a1 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -625,27 +625,6 @@ enum sci_status scic_sds_port_initialize( this_port->port_pe_configuration_register = port_configuration_regsiter; this_port->viit_registers = viit_registers; - /* - * If this is not the dummy port make the assignment of - * the timer and start the state machine */ - if (this_port->physical_port_index != SCI_MAX_PORTS) { - /* / @todo should we create the timer at create time? */ - this_port->timer_handle = isci_event_timer_create( - scic_sds_port_get_controller(this_port), - scic_sds_port_timeout_handler, - this_port - ); - - } else { - /* - * Force the dummy port into a condition where it rejects all requests - * as its in an invalid state for any operation. - * / @todo should we set a set of specical handlers for the dummy port? */ - scic_sds_port_set_base_state_handlers( - this_port, SCI_BASE_PORT_STATE_STOPPED - ); - } - return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index a7cb4bc..0ac6ca0 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1822,6 +1822,11 @@ static void scic_sds_remote_device_stopped_state_enter( SCI_SUCCESS ); } + + scic_sds_controller_remote_device_stopped( + scic_sds_remote_device_get_controller(this_device), + this_device + ); } /** @@ -1875,6 +1880,11 @@ static void scic_sds_remote_device_starting_state_exit( this_device, SCI_SUCCESS ); + + scic_sds_controller_remote_device_started( + scic_sds_remote_device_get_controller(this_device), + this_device + ); } /** -- cgit v0.10.2 From 4d07f7f367f2c2d5547684893e61a7a796c1547f Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 2 Mar 2011 12:31:24 -0800 Subject: isci: Adding support for phy enable and disable Adding support for PHY_FUNC_LINK_RESET and PHY_FUNC_DISABLE. This allow the sysfs knob enable (both 0 and 1) and link_reset to work properly. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index ba9e557..6f00ff6 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -537,27 +537,25 @@ void scic_sds_phy_get_attached_phy_protocols( /** * This method will attempt to start the phy object. This request is only valid * when the phy is in the stopped state - * @this_phy: + * @sci_phy: * * enum sci_status */ -enum sci_status scic_sds_phy_start( - struct scic_sds_phy *this_phy) +enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) { - return this_phy->state_handlers->parent.start_handler(&this_phy->parent); + return sci_phy->state_handlers->parent.start_handler(&sci_phy->parent); } /** * This method will attempt to stop the phy object. - * @this_phy: + * @sci_phy: * - * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE if the - * phy is not in a valid state to stop + * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE + * if the phy is not in a valid state to stop */ -enum sci_status scic_sds_phy_stop( - struct scic_sds_phy *this_phy) +enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) { - return this_phy->state_handlers->parent.stop_handler(&this_phy->parent); + return sci_phy->state_handlers->parent.stop_handler(&sci_phy->parent); } /** @@ -2526,7 +2524,8 @@ static void scic_sds_phy_initial_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state @@ -2539,7 +2538,10 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) sci_phy = (struct scic_sds_phy *)object; - /* / @todo We need to get to the controller to place this PE in a reset state */ + /* + * @todo We need to get to the controller to place this PE in a + * reset state + */ scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STOPPED); @@ -2551,6 +2553,12 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) } scu_link_layer_stop_protocol_engine(sci_phy); + + if (sci_phy->parent.state_machine.previous_state_id != + SCI_BASE_PHY_STATE_INITIAL) + scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy); } /** diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 1eefaae..decc0c0 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -58,6 +58,9 @@ #include "scic_port.h" #include "scic_config_parameters.h" +struct scic_sds_phy; +extern enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy); +extern enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy); /** * isci_phy_init() - This function is called by the probe function to @@ -127,42 +130,48 @@ void isci_phy_init( * * status, zero indicates success. */ -int isci_phy_control( - struct asd_sas_phy *phy, - enum phy_func func, - void *buf) +int isci_phy_control(struct asd_sas_phy *sas_phy, + enum phy_func func, + void *buf) { - int ret = TMF_RESP_FUNC_COMPLETE; - struct isci_phy *isci_phy_ptr = (struct isci_phy *)phy->lldd_phy; - struct isci_port *isci_port_ptr = NULL; - - if (isci_phy_ptr != NULL) - isci_port_ptr = isci_phy_ptr->isci_port; - - if ((isci_phy_ptr == NULL) || (isci_port_ptr == NULL)) { - pr_err("%s: asd_sas_phy %p: lldd_phy %p or " - "isci_port %p == NULL!\n", - __func__, phy, isci_phy_ptr, isci_port_ptr); - return TMF_RESP_FUNC_FAILED; - } + int ret = 0; + struct isci_phy *iphy = sas_phy->lldd_phy; + struct isci_port *iport = iphy->isci_port; + struct isci_host *ihost = sas_phy->ha->lldd_ha; + unsigned long flags; - pr_debug("%s: phy %p; func %d; buf %p; isci phy %p, port %p\n", - __func__, phy, func, buf, isci_phy_ptr, isci_port_ptr); + dev_dbg(&ihost->pdev->dev, + "%s: phy %p; func %d; buf %p; isci phy %p, port %p\n", + __func__, sas_phy, func, buf, iphy, iport); switch (func) { - case PHY_FUNC_HARD_RESET: + case PHY_FUNC_DISABLE: + spin_lock_irqsave(&ihost->scic_lock, flags); + scic_sds_phy_stop(iphy->sci_phy_handle); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + break; + case PHY_FUNC_LINK_RESET: + spin_lock_irqsave(&ihost->scic_lock, flags); + scic_sds_phy_stop(iphy->sci_phy_handle); + scic_sds_phy_start(iphy->sci_phy_handle); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + break; + + case PHY_FUNC_HARD_RESET: + if (!iport) + return -ENODEV; /* Perform the port reset. */ - ret = isci_port_perform_hard_reset(isci_port_ptr, isci_phy_ptr); + ret = isci_port_perform_hard_reset(iport, iphy); break; - case PHY_FUNC_DISABLE: default: - pr_debug("%s: phy %p; func %d NOT IMPLEMENTED!\n", - __func__, phy, func); - ret = TMF_RESP_FUNC_FAILED; + dev_dbg(&ihost->pdev->dev, + "%s: phy %p; func %d NOT IMPLEMENTED!\n", + __func__, sas_phy, func); + ret = -ENOSYS; break; } return ret; -- cgit v0.10.2 From d7628d052242d634dc1e2584c422e690578918a3 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 2 Mar 2011 13:10:45 -0800 Subject: isci: Cleanup warning messages for phy resets Moving some of the chattiness of warning messages to debug so only the Linux system messages are shown. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index deee7eb..180bb1e 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1669,7 +1669,7 @@ void scic_sds_controller_link_up( if (link_up) link_up(scic, sci_port, sci_phy); else - dev_warn(scic_to_dev(scic), + dev_dbg(scic_to_dev(scic), "%s: SCIC Controller linkup event from phy %d in " "unexpected state %d\n", __func__, @@ -1694,14 +1694,11 @@ void scic_sds_controller_link_down( if (link_down) link_down(scic, sci_port, sci_phy); else - dev_warn(scic_to_dev(scic), + dev_dbg(scic_to_dev(scic), "%s: SCIC Controller linkdown event from phy %d in " "unexpected state %d\n", __func__, - sci_phy->phy_index, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - scic))); + sci_phy->phy_index, state); } /** @@ -1710,28 +1707,22 @@ void scic_sds_controller_link_down( * */ -void scic_sds_controller_remote_device_started( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *the_device) +void scic_sds_controller_remote_device_started(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev) { u32 state; - scic_sds_controller_device_handler_t remote_device_started_handler; + scic_sds_controller_device_handler_t started; - state = this_controller->parent.state_machine.current_state_id; - remote_device_started_handler = scic_sds_controller_state_handler_table[state].remote_device_started_handler; + state = scic->parent.state_machine.current_state_id; + started = scic_sds_controller_state_handler_table[state].remote_device_started_handler; - if (remote_device_started_handler != NULL) - remote_device_started_handler(this_controller, the_device); + if (started) + started(scic, sci_dev); else { - dev_warn(scic_to_dev(this_controller), - "%s: SCIC Controller 0x%p remote device started event " - "from device 0x%p in unexpected state %d\n", - __func__, - this_controller, - the_device, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - this_controller))); + dev_dbg(scic_to_dev(scic), + "%s: SCIC Controller 0x%p remote device started event " + "from device 0x%p in unexpected state %d\n", + __func__, scic, sci_dev, state); } } @@ -1761,29 +1752,23 @@ bool scic_sds_controller_has_remote_devices_stopping( * */ -void scic_sds_controller_remote_device_stopped( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *the_device) +void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev) { u32 state; - scic_sds_controller_device_handler_t remote_device_stopped_handler; + scic_sds_controller_device_handler_t stopped; - state = this_controller->parent.state_machine.current_state_id; - remote_device_stopped_handler = scic_sds_controller_state_handler_table[state].remote_device_stopped_handler; + state = scic->parent.state_machine.current_state_id; + stopped = scic_sds_controller_state_handler_table[state].remote_device_stopped_handler; - if (remote_device_stopped_handler != NULL) - remote_device_stopped_handler(this_controller, the_device); + if (stopped) + stopped(scic, sci_dev); else { - dev_warn(scic_to_dev(this_controller), - "%s: SCIC Controller 0x%p remote device stopped event " - "from device 0x%p in unexpected state %d\n", - __func__, - this_controller, - the_device, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - this_controller))); + dev_dbg(scic_to_dev(scic), + "%s: SCIC Controller 0x%p remote device stopped event " + "from device 0x%p in unexpected state %d\n", + __func__, scic, sci_dev, state); } } diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 6f00ff6..2717458 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -808,11 +808,11 @@ static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( break; default: - dev_warn(sciphy_to_dev(this_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); + dev_dbg(sciphy_to_dev(this_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); result = SCI_FAILURE; break; @@ -2000,26 +2000,24 @@ enum sci_status scic_sds_phy_default_start_handler( /** * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. + * @phy: This is the struct sci_base_phy object which is cast into a + * struct scic_sds_phy object. * * This is the default method for phy a stop request. It will report a warning * and exit. enum sci_status SCI_FAILURE_INVALID_STATE */ -enum sci_status scic_sds_phy_default_stop_handler( - struct sci_base_phy *phy) +enum sci_status scic_sds_phy_default_stop_handler(struct sci_base_phy *base_phy) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)phy; + sci_phy = (struct scic_sds_phy *)base_phy; - dev_warn(sciphy_to_dev(this_phy), - "%s: SCIC Phy 0x%p requested to stop from invalid " - "state %d\n", - __func__, - this_phy, - sci_base_state_machine_get_state( - &this_phy->parent.state_machine)); + dev_dbg(sciphy_to_dev(sci_phy), + "%s: SCIC Phy 0x%p requested to stop from invalid state %d\n", + __func__, + sci_phy, + sci_base_state_machine_get_state( + &sci_phy->parent.state_machine)); return SCI_FAILURE_INVALID_STATE; } @@ -2119,7 +2117,7 @@ enum sci_status scic_sds_phy_default_event_handler( struct scic_sds_phy *this_phy, u32 event_code) { - dev_warn(sciphy_to_dev(this_phy), + dev_dbg(sciphy_to_dev(this_phy), "%s: SCIC Phy 0x%p received unexpected event status %x " "while in state %d\n", __func__, diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index dec9033..e684a05 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -472,7 +472,7 @@ void isci_remote_device_gone( struct isci_remote_device *isci_device = isci_dev_from_domain_dev( domain_dev); - dev_err(&isci_device->isci_port->isci_host->pdev->dev, + dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, "%s: domain_device = %p, isci_device = %p, isci_port = %p\n", __func__, domain_dev, isci_device, isci_device->isci_port); -- cgit v0.10.2 From 27ce51df9a333ca7e05e09f6d25becf26ac1ff45 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 2 Mar 2011 16:45:18 -0800 Subject: isci: fix hang after target reset When aborting a task context we need to be sure that the hardware has acted on this request (retrieved the task context) before invalidating the remote node context. In the case of the "dummy" task context and remote node we do not have the full state machine that goes through the complete tc abort and rnc invalidate states. Instead we ensure the hardware has seen and acted on Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 410c9a1..a41fe42 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -1673,12 +1673,6 @@ static void scic_sds_port_ready_substate_waiting_enter( scic_sds_port_suspend_port_task_scheduler(this_port); - /* Kill the dummy task for this port if it has not yet posted - * the hardware will treat this as a NOP and just return abort - * complete. - */ - scic_sds_port_abort_dummy_request(this_port); - this_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; if (this_port->active_phy_mask != 0) { @@ -1744,6 +1738,13 @@ static void scic_sds_port_ready_substate_operational_exit( { struct scic_sds_port *this_port = (struct scic_sds_port *)object; +/* + * Kill the dummy task for this port if it has not yet posted + * the hardware will treat this as a NOP and just return abort + * complete. + */ + scic_sds_port_abort_dummy_request(this_port); + isci_event_port_not_ready( scic_sds_port_get_controller(this_port), this_port, @@ -2643,6 +2644,13 @@ void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) rnc->ssp.is_valid = false; + /* ensure the preceding tc abort request has reached the + * controller and give it ample time to act before posting the rnc + * invalidate + */ + SMU_ISR_READ(scic); /* flush */ + udelay(10); + command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; -- cgit v0.10.2 From fe9a643157747cf85ecc07cd341e448c5849364f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 3 Mar 2011 14:58:11 -0800 Subject: isci: pad stp and smp request sizes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ross says: "The memory allocation for these requests doesn’t take into account the additional memory needed when the code in scic_sds_s[mst]p_request_assign_buffers() shifts the struct scu_task_context so that it is cache line aligned: In an example from my machine, total buffer that I’ve given to SCIC goes from 0x410024566f84 to 0x410024567308. From this same example, this call shifts my task_context_buffer from 0x410024567208 to 0x410024567240. This means that the task_context_buffer that used to range from 0x410024567208 to 0x410024567308 instead now goes from 0x410024567240 to 0x410024567340. When the memset() call at the end of scic_task_request_construct() clears out this task_context_buffer, it does so from 0x410024567240 to 0x410024567340, effectively killing whatever buffer follows this allocation in memory." djbw: Use the kernel's PTR_ALIGN instead of scic_sds_request_align_task_context_buffer() and SMP_CACHE_BYTES instead of the local CACHE_LINE_SIZE definition. TODO: These allocations really want to be better defined in a union rather than opaque buffers carved up by macros. Reported-by: Ross Zwisler Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 7b9ce1e..00bebb9 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -222,7 +222,7 @@ static u32 scic_sds_ssp_request_get_object_size(void) return sizeof(struct scic_sds_request) + scic_ssp_io_request_get_object_size() + sizeof(struct scu_task_context) - + CACHE_LINE_SIZE + + SMP_CACHE_BYTES + sizeof(struct scu_sgl_element_pair) * SCU_MAX_SGL_ELEMENT_PAIRS; } @@ -395,13 +395,15 @@ static void scic_sds_ssp_io_request_assign_buffers( this_request->sgl_element_pair_buffer = scic_sds_ssp_request_get_sgl_element_buffer(this_request); this_request->sgl_element_pair_buffer = - scic_sds_request_align_sgl_element_buffer(this_request->sgl_element_pair_buffer); + PTR_ALIGN(this_request->sgl_element_pair_buffer, + sizeof(struct scu_sgl_element_pair)); if (this_request->was_tag_assigned_by_user == false) { this_request->task_context_buffer = scic_sds_ssp_request_get_task_context_buffer(this_request); this_request->task_context_buffer = - scic_sds_request_align_task_context_buffer(this_request->task_context_buffer); + PTR_ALIGN(this_request->task_context_buffer, + SMP_CACHE_BYTES); } } @@ -638,7 +640,7 @@ static void scic_sds_ssp_task_request_assign_buffers( this_request->task_context_buffer = scic_sds_ssp_task_request_get_task_context_buffer(this_request); this_request->task_context_buffer = - scic_sds_request_align_task_context_buffer(this_request->task_context_buffer); + PTR_ALIGN(this_request->task_context_buffer, SMP_CACHE_BYTES); } } diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 19b6fee..06b53c3 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -313,28 +313,6 @@ extern const struct scic_sds_io_request_state_handler scic_sds_smp_request_start #define scic_sds_request_get_task_context(request) \ ((request)->task_context_buffer) -#define CACHE_LINE_SIZE (64) -#define scic_sds_request_align_task_context_buffer(address) \ - ((struct scu_task_context *)(\ - (((unsigned long)(address)) + (CACHE_LINE_SIZE - 1)) \ - & ~(CACHE_LINE_SIZE - 1) \ - )) - -/** - * scic_sds_request_align_sgl_element_buffer() - - * - * This macro will align the memory address so that it is correct for the SCU - * hardware to DMA the SGL element pairs. - */ -#define scic_sds_request_align_sgl_element_buffer(address) \ - ((struct scu_sgl_element_pair *)(\ - ((char *)(address)) \ - + (\ - ((~(unsigned long)(address)) + 1) \ - & (sizeof(struct scu_sgl_element_pair) - 1) \ - ) \ - )) - /** * scic_sds_request_set_status() - * diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 85c8906..962bd39 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -80,7 +80,8 @@ u32 scic_sds_smp_request_get_object_size(void) return sizeof(struct scic_sds_request) + sizeof(struct smp_request) + sizeof(struct smp_response) - + sizeof(struct scu_task_context); + + sizeof(struct scu_task_context) + + SMP_CACHE_BYTES; } /** @@ -137,7 +138,7 @@ void scic_sds_smp_request_assign_buffers( this_request->task_context_buffer = scic_sds_smp_request_get_task_context_buffer(this_request); this_request->task_context_buffer = - scic_sds_request_align_task_context_buffer(this_request->task_context_buffer); + PTR_ALIGN(this_request->task_context_buffer, SMP_CACHE_BYTES); } } diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 0f17a28..8da309f 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -131,33 +131,25 @@ u32 scic_sds_stp_request_get_object_size(void) + sizeof(struct sata_fis_reg_h2d) + sizeof(struct sata_fis_reg_d2h) + sizeof(struct scu_task_context) + + SMP_CACHE_BYTES + sizeof(struct scu_sgl_element_pair) * SCU_MAX_SGL_ELEMENT_PAIRS; } -/** - * - * - * - */ -void scic_sds_stp_request_assign_buffers( - struct scic_sds_request *request) +void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) { - struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; - - this_request->parent.command_buffer = - scic_sds_stp_request_get_h2d_reg_buffer(this_request); - this_request->parent.response_buffer = - scic_sds_stp_request_get_response_buffer(this_request); - this_request->parent.sgl_element_pair_buffer = - scic_sds_stp_request_get_sgl_element_buffer(this_request); - this_request->parent.sgl_element_pair_buffer = - scic_sds_request_align_sgl_element_buffer(this_request->parent.sgl_element_pair_buffer); - - if (this_request->parent.was_tag_assigned_by_user == false) { - this_request->parent.task_context_buffer = - scic_sds_stp_request_get_task_context_buffer(this_request); - this_request->parent.task_context_buffer = - scic_sds_request_align_task_context_buffer(this_request->parent.task_context_buffer); + struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + + sci_req->command_buffer = scic_sds_stp_request_get_h2d_reg_buffer(stp_req); + sci_req->response_buffer = scic_sds_stp_request_get_response_buffer(stp_req); + sci_req->sgl_element_pair_buffer = scic_sds_stp_request_get_sgl_element_buffer(stp_req); + sci_req->sgl_element_pair_buffer = PTR_ALIGN(sci_req->sgl_element_pair_buffer, + sizeof(struct scu_sgl_element_pair)); + + if (sci_req->was_tag_assigned_by_user == false) { + sci_req->task_context_buffer = + scic_sds_stp_request_get_task_context_buffer(stp_req); + sci_req->task_context_buffer = PTR_ALIGN(sci_req->task_context_buffer, + SMP_CACHE_BYTES); } } -- cgit v0.10.2 From 52bed8eab5d392183b77426b96551011f3521ef8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 3 Mar 2011 17:59:25 -0800 Subject: isci: enable isci for dmar builds Now that phys_to_virt() and virt_to_phys() have been removed we are no longer violating the dma mapping (or kmap apis). Signed-off-by: Dan Williams diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 3aa664f..e18938b 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -833,10 +833,7 @@ config SCSI_GDTH config SCSI_ISCI tristate "Intel(R) C600 Series Chipset SAS Controller" depends on PCI && SCSI - # little endian host assumptions depends on X86 - # (temporary): dma api misuse - depends on !DMAR # (temporary): known alpha quality driver depends on EXPERIMENTAL select SCSI_SAS_LIBSAS -- cgit v0.10.2 From b329aff107543c3c4db26c1572405034c3baf906 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 7 Mar 2011 16:02:25 -0800 Subject: isci: kill isci_host list in favor of an array isci_host_by_id() should have been a clue that an array would have been a simpler approach. Reported-by: James Bottomley Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 40614e9..da0c0da 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -78,8 +78,9 @@ irqreturn_t isci_intx_isr(int vec, void *data) struct pci_dev *pdev = data; struct isci_host *ihost; irqreturn_t ret = IRQ_NONE; + int i; - for_each_isci_host(ihost, pdev) { + for_each_isci_host(i, ihost, pdev) { struct scic_sds_controller *scic = ihost->core_controller; if (scic_sds_controller_isr(scic)) { diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index ef3e7d1..7c1f0b5 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -117,7 +117,6 @@ struct isci_host { struct list_head requests_to_complete; struct list_head requests_to_abort; spinlock_t scic_lock; - struct isci_host *next; }; @@ -131,7 +130,7 @@ struct isci_host { struct isci_pci_info { struct msix_entry msix_entries[SCI_MAX_MSIX_INT]; int core_lib_array_index; - struct isci_host *hosts; + struct isci_host *hosts[SCI_MAX_CONTROLLERS]; }; static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) @@ -139,9 +138,10 @@ static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) return pci_get_drvdata(pdev); } -#define for_each_isci_host(isci_host, pdev) \ - for (isci_host = to_pci_info(pdev)->hosts;\ - isci_host; isci_host = isci_host->next) +#define for_each_isci_host(id, ihost, pdev) \ + for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \ + id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \ + ihost = to_pci_info(pdev)->hosts[++id]) static inline enum isci_status isci_host_get_state( diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index d01c44f..f1b8a51 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -285,16 +285,6 @@ static int __devinit isci_pci_init(struct pci_dev *pdev) return 0; } -static struct isci_host *isci_host_by_id(struct pci_dev *pdev, int id) -{ - struct isci_host *h; - - for_each_isci_host(h, pdev) - if (h->id == id) - return h; - return NULL; -} - static int num_controllers(struct pci_dev *pdev) { /* bar size alone can tell us if we are running with a dual controller @@ -332,7 +322,7 @@ static int isci_setup_interrupts(struct pci_dev *pdev) for (i = 0; i < num_msix; i++) { int id = i / SCI_NUM_MSI_X_INT; struct msix_entry *msix = &pci_info->msix_entries[i]; - struct isci_host *isci_host = isci_host_by_id(pdev, id); + struct isci_host *isci_host = pci_info->hosts[id]; irq_handler_t isr; /* odd numbered vectors are error interrupts */ @@ -351,7 +341,7 @@ static int isci_setup_interrupts(struct pci_dev *pdev) dev_info(&pdev->dev, "msix setup failed falling back to intx\n"); while (i--) { id = i / SCI_NUM_MSI_X_INT; - isci_host = isci_host_by_id(pdev, id); + isci_host = pci_info->hosts[id]; msix = &pci_info->msix_entries[i]; devm_free_irq(&pdev->dev, msix->vector, isci_host); } @@ -634,22 +624,20 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic err = -ENOMEM; goto err_host_alloc; } - - h->next = pci_info->hosts; - pci_info->hosts = h; + pci_info->hosts[i] = h; } err = isci_setup_interrupts(pdev); if (err) goto err_host_alloc; - for_each_isci_host(isci_host, pdev) + for_each_isci_host(i, isci_host, pdev) scsi_scan_host(isci_host->shost); return 0; err_host_alloc: - for_each_isci_host(isci_host, pdev) + for_each_isci_host(i, isci_host, pdev) isci_unregister_sas_ha(isci_host); return err; } @@ -657,8 +645,9 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic static void __devexit isci_pci_remove(struct pci_dev *pdev) { struct isci_host *isci_host; + int i; - for_each_isci_host(isci_host, pdev) { + for_each_isci_host(i, isci_host, pdev) { isci_unregister_sas_ha(isci_host); isci_host_deinit(isci_host); scic_controller_disable_interrupts(isci_host->core_controller); -- cgit v0.10.2 From 3a97eec6d7876c541950e23811efd40e0bcd04a0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 4 Mar 2011 11:51:43 -0800 Subject: isci: remove sci_device_handle It belies the fact that isci_remote_device and scic_sds_remote_device are one in same object with the same lifetime rules. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index e684a05..0eb5c73 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -92,7 +92,7 @@ static void isci_remote_device_deconstruct( /* Remove all related references to this device and free * the cache object. */ - scic_remote_device_destruct(isci_device->sci_device_handle); + scic_remote_device_destruct(to_sci_dev(isci_device)); isci_device->domain_dev->lldd_dev = NULL; list_del(&isci_device->node); kmem_cache_free(isci_kmem_cache, isci_device); @@ -117,7 +117,7 @@ static enum sci_status isci_remote_device_construct( /* let the core do it's common constuction. */ scic_remote_device_construct(port->sci_port_handle, - isci_device->sci_device_handle); + to_sci_dev(isci_device)); /* let the core do it's device specific constuction. */ if (isci_device->domain_dev->parent && @@ -183,15 +183,11 @@ static enum sci_status isci_remote_device_construct( "%s: parent->dev_type = EDGE_DEV\n", __func__); - status = scic_remote_device_ea_construct( - isci_device->sci_device_handle, - (struct smp_response_discover *)&discover_response - ); + status = scic_remote_device_ea_construct(to_sci_dev(isci_device), + (struct smp_response_discover *)&discover_response); } else - status = scic_remote_device_da_construct( - isci_device->sci_device_handle - ); + status = scic_remote_device_da_construct(to_sci_dev(isci_device)); if (status != SCI_SUCCESS) { @@ -204,18 +200,13 @@ static enum sci_status isci_remote_device_construct( return status; } - sci_object_set_association( - isci_device->sci_device_handle, - isci_device - ); + sci_object_set_association(to_sci_dev(isci_device), isci_device); BUG_ON(port->isci_host == NULL); /* start the device. */ - status = scic_remote_device_start( - isci_device->sci_device_handle, - ISCI_REMOTE_DEVICE_START_TIMEOUT - ); + status = scic_remote_device_start(to_sci_dev(isci_device), + ISCI_REMOTE_DEVICE_START_TIMEOUT); if (status != SCI_SUCCESS) { dev_warn(&port->isci_host->pdev->dev, @@ -266,7 +257,6 @@ static struct isci_remote_device * isci_remote_device_alloc(struct isci_host *isci_host, struct isci_port *port) { struct isci_remote_device *isci_device; - struct scic_sds_remote_device *sci_dev; isci_device = kmem_cache_zalloc(isci_kmem_cache, GFP_KERNEL); @@ -275,8 +265,6 @@ isci_remote_device_alloc(struct isci_host *isci_host, struct isci_port *port) return NULL; } - sci_dev = (struct scic_sds_remote_device *) &isci_device[1]; - isci_device->sci_device_handle = sci_dev; INIT_LIST_HEAD(&isci_device->reqs_in_process); INIT_LIST_HEAD(&isci_device->node); isci_device->host_quiesce = false; @@ -441,10 +429,7 @@ enum sci_status isci_remote_device_stop( spin_lock_irqsave(&isci_device->isci_port->isci_host->scic_lock, flags); - status = scic_remote_device_stop( - isci_device->sci_device_handle, - 50 - ); + status = scic_remote_device_stop(to_sci_dev(isci_device), 50); spin_unlock_irqrestore(&isci_device->isci_port->isci_host->scic_lock, flags); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 48e37cf..cd43c15 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -60,7 +60,6 @@ struct isci_host; struct scic_sds_remote_device; struct isci_remote_device { - struct scic_sds_remote_device *sci_device_handle; enum isci_status status; struct isci_port *isci_port; struct domain_device *domain_dev; @@ -73,6 +72,12 @@ struct isci_remote_device { bool host_quiesce; }; +static inline struct scic_sds_remote_device *to_sci_dev(struct isci_remote_device *idev) +{ + /* core data is an opaque buffer at the end of the idev */ + return (struct scic_sds_remote_device *) &idev[1]; +} + #define to_isci_remote_device(p) \ container_of(p, struct isci_remote_device, sci_remote_device); diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 81a7733..6b0863e 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -179,8 +179,7 @@ static enum sci_status isci_io_request_build( struct smp_discover_response_protocols dev_protocols; enum sci_status status = SCI_SUCCESS; struct sas_task *task = isci_request_access_task(request); - struct scic_sds_remote_device *sci_device = - isci_device->sci_device_handle; + struct scic_sds_remote_device *sci_device = to_sci_dev(isci_device); dev_dbg(&isci_host->pdev->dev, "%s: isci_device = 0x%p; request = %p, " @@ -408,7 +407,7 @@ int isci_request_execute( unsigned long flags; isci_device = isci_dev_from_domain_dev(task->dev); - sci_device = isci_device->sci_device_handle; + sci_device = to_sci_dev(isci_device); /* do common allocation and init of request object. */ ret = isci_request_alloc_io( @@ -1177,7 +1176,7 @@ void isci_request_io_request_complete( /* complete the io request to the core. */ scic_controller_complete_io( isci_host->core_controller, - isci_device->sci_device_handle, + to_sci_dev(isci_device), request->sci_request_handle ); /* NULL the request handle so it cannot be completed or diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 6fbf159..7a1b586 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -348,7 +348,7 @@ int isci_task_send_lu_reset_sata( spin_lock_irqsave(&isci_host->scic_lock, flags); /* Resume the device. */ - scic_sds_remote_device_resume(isci_device->sci_device_handle); + scic_sds_remote_device_resume(to_sci_dev(isci_device)); spin_unlock_irqrestore(&isci_host->scic_lock, flags); diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 232125e..c637bbc 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -285,7 +285,7 @@ static enum sci_status isci_task_request_build( "%s: isci_tmf = %p\n", __func__, isci_tmf); isci_device = isci_tmf->device; - sci_device = isci_device->sci_device_handle; + sci_device = to_sci_dev(isci_device); /* do common allocation and init of request object. */ status = isci_request_alloc_tmf( @@ -395,7 +395,7 @@ static void isci_tmf_timeout_cb(void *tmf_request_arg) /* Terminate the TMF transmit request. */ status = scic_controller_terminate_request( request->isci_host->core_controller, - request->isci_device->sci_device_handle, + to_sci_dev(request->isci_device), request->sci_request_handle ); @@ -456,7 +456,7 @@ int isci_task_execute_tmf( "%s: isci_device = %p\n", __func__, isci_device); - sci_device = isci_device->sci_device_handle; + sci_device = to_sci_dev(isci_device); /* Assign the pointer to the TMF's completion kernel wait structure. */ tmf->complete = &completion; @@ -728,7 +728,7 @@ static void isci_terminate_request_core( was_terminated = true; status = scic_controller_terminate_request( isci_host->core_controller, - isci_device->sci_device_handle, + to_sci_dev(isci_device), isci_request->sci_request_handle ); } @@ -1469,7 +1469,7 @@ void isci_task_request_complete( scic_controller_complete_task( isci_host->core_controller, - isci_device->sci_device_handle, + to_sci_dev(isci_device), request->sci_request_handle ); /* NULL the request handle to make sure it cannot be terminated @@ -1612,7 +1612,7 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) if (isci_host != NULL) spin_lock_irqsave(&isci_host->scic_lock, flags); - status = scic_remote_device_reset(isci_dev->sci_device_handle); + status = scic_remote_device_reset(to_sci_dev(isci_dev)); if (status != SCI_SUCCESS) { if (isci_host != NULL) @@ -1654,8 +1654,7 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) if (isci_host != NULL) spin_lock_irqsave(&isci_host->scic_lock, flags); - status - = scic_remote_device_reset_complete(isci_dev->sci_device_handle); + status = scic_remote_device_reset_complete(to_sci_dev(isci_dev)); if (isci_host != NULL) spin_unlock_irqrestore(&isci_host->scic_lock, flags); -- cgit v0.10.2 From 8acaec1593526f922ff46812d99abf9aab5c8b43 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 7 Mar 2011 14:47:35 -0800 Subject: isci: kill "host quiesce" mechanism The midlayer is already throttling i/o in the places where host_quiesce was trying to prevent further i/o to the device. It's also problematic in that it holds a lock over GFP_KERNEL allocations. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index b01b0c6..b864d70 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -73,7 +73,6 @@ enum isci_status { isci_ready_for_io = 0x03, isci_stopping = 0x04, isci_stopped = 0x05, - isci_host_quiesce = 0x06 }; /** diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 0eb5c73..fc1f244 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -267,36 +267,13 @@ isci_remote_device_alloc(struct isci_host *isci_host, struct isci_port *port) INIT_LIST_HEAD(&isci_device->reqs_in_process); INIT_LIST_HEAD(&isci_device->node); - isci_device->host_quiesce = false; spin_lock_init(&isci_device->state_lock); - spin_lock_init(&isci_device->host_quiesce_lock); isci_remote_device_change_state(isci_device, isci_freed); return isci_device; } -/** - * isci_device_set_host_quiesce_lock_state() - This function sets the host I/O - * quiesce lock state for the remote_device object. - * @isci_device,: This parameter points to the isci_remote_device object - * @isci_device: This parameter specifies the new quiesce state. - * - */ -void isci_device_set_host_quiesce_lock_state( - struct isci_remote_device *isci_device, - bool lock_state) -{ - unsigned long flags; - - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, - "%s: isci_device=%p, lock_state=%d\n", - __func__, isci_device, lock_state); - - spin_lock_irqsave(&isci_device->host_quiesce_lock, flags); - isci_device->host_quiesce = lock_state; - spin_unlock_irqrestore(&isci_device->host_quiesce_lock, flags); -} /** * isci_remote_device_ready() - This function is called by the scic when the @@ -314,8 +291,8 @@ void isci_remote_device_ready(struct isci_remote_device *isci_device) "%s: isci_device = %p\n", __func__, isci_device); /* device ready is actually a "ready for io" state. */ - if ((isci_starting == isci_remote_device_get_state(isci_device)) || - (isci_ready == isci_remote_device_get_state(isci_device))) { + if (isci_device->status == isci_starting || + isci_device->status == isci_ready) { spin_lock_irqsave(&isci_device->isci_port->remote_device_lock, flags); isci_remote_device_change_state(isci_device, isci_ready_for_io); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index cd43c15..af03039 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -68,8 +68,6 @@ struct isci_remote_device { struct list_head reqs_in_process; struct work_struct stop_work; spinlock_t state_lock; - spinlock_t host_quiesce_lock; - bool host_quiesce; }; static inline struct scic_sds_remote_device *to_sci_dev(struct isci_remote_device *idev) @@ -85,22 +83,6 @@ static inline struct scic_sds_remote_device *to_sci_dev(struct isci_remote_devic /** - * This function gets the status of the remote_device object. - * @isci_device: This parameter points to the isci_remote_device object - * - * status of the object as a isci_status enum. - */ -static inline -enum isci_status isci_remote_device_get_state( - struct isci_remote_device *isci_device) -{ - return (isci_device->host_quiesce) - ? isci_host_quiesce - : isci_device->status; -} - - -/** * isci_dev_from_domain_dev() - This accessor retrieves the remote_device * object reference from the Linux domain_device reference. * @domdev,: This parameter points to the Linux domain_device object . @@ -146,10 +128,6 @@ bool isci_device_is_reset_pending( void isci_device_clear_reset_pending( struct isci_remote_device *isci_device); -void isci_device_set_host_quiesce_lock_state( - struct isci_remote_device *isci_device, - bool lock_state); - void isci_remote_device_change_state( struct isci_remote_device *isci_device, enum isci_status status); diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c637bbc..98204b0 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -81,7 +81,6 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) struct isci_request *request = NULL; struct isci_remote_device *device; unsigned long flags; - unsigned long quiesce_flags = 0; int ret; enum sci_status status; @@ -151,21 +150,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) isci_host = isci_host_from_sas_ha(task->dev->port->ha); - /* check if the controller hasn't started or if the device - * is ready but not accepting IO. - */ - if (device) { - - spin_lock_irqsave(&device->host_quiesce_lock, - quiesce_flags); - } - /* From this point onward, any process that needs to guarantee - * that there is no kernel I/O being started will have to wait - * for the quiesce spinlock. - */ - - if ((device && ((isci_remote_device_get_state(device) == isci_ready) || - (isci_remote_device_get_state(device) == isci_host_quiesce)))) { + if (device && device->status == isci_ready) { /* Forces a retry from scsi mid layer. */ dev_warn(task->dev->port->ha->dev, @@ -179,8 +164,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) if (device) dev_dbg(task->dev->port->ha->dev, "%s: device->status = 0x%x\n", - __func__, - isci_remote_device_get_state(device)); + __func__, device->status); /* Indicate QUEUE_FULL so that the scsi midlayer * retries. @@ -194,7 +178,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) isci_host_can_dequeue(isci_host, 1); } /* the device is going down... */ - else if (!device || (isci_ready_for_io != isci_remote_device_get_state(device))) { + else if (!device || device->status != isci_ready_for_io) { dev_dbg(task->dev->port->ha->dev, "%s: task %p: isci_host->status = %d, " @@ -207,8 +191,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) if (device) dev_dbg(task->dev->port->ha->dev, "%s: device->status = 0x%x\n", - __func__, - isci_remote_device_get_state(device)); + __func__, device->status); /* Indicate SAS_TASK_UNDELIVERED, so that the scsi * midlayer removes the target. @@ -247,11 +230,6 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) isci_host_can_dequeue(isci_host, 1); } } - if (device) { - spin_unlock_irqrestore(&device->host_quiesce_lock, - quiesce_flags - ); - } task = list_entry(task->list.next, struct sas_task, list); } while (--num > 0); return 0; @@ -442,14 +420,11 @@ int isci_task_execute_tmf( /* sanity check, return TMF_RESP_FUNC_FAILED * if the device is not there and ready. */ - if (!isci_device || - ((isci_ready_for_io != isci_remote_device_get_state(isci_device)) && - (isci_host_quiesce != isci_remote_device_get_state(isci_device)))) { + if (!isci_device || isci_device->status != isci_ready_for_io) { dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p not ready (%d)\n", __func__, - isci_device, - isci_remote_device_get_state(isci_device)); + isci_device, isci_device->status); return TMF_RESP_FUNC_FAILED; } else dev_dbg(&isci_host->pdev->dev, @@ -986,9 +961,6 @@ int isci_task_lu_reset( return TMF_RESP_FUNC_FAILED; } - /* Stop I/O to the remote device. */ - isci_device_set_host_quiesce_lock_state(isci_device, true); - /* Send the task management part of the reset. */ if (sas_protocol_ata(domain_device->tproto)) { ret = isci_task_send_lu_reset_sata( @@ -1004,9 +976,6 @@ int isci_task_lu_reset( isci_device, terminating); - /* Resume I/O to the remote device. */ - isci_device_set_host_quiesce_lock_state(isci_device, false); - return ret; } @@ -1627,9 +1596,6 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) if (isci_host != NULL) spin_unlock_irqrestore(&isci_host->scic_lock, flags); - /* Stop I/O to the remote device. */ - isci_device_set_host_quiesce_lock_state(isci_dev, true); - /* Make sure all pending requests are able to be fully terminated. */ isci_device_clear_reset_pending(isci_dev); @@ -1671,8 +1637,5 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) "%s: cmd %p, isci_dev %p complete.\n", __func__, cmd, isci_dev); - /* Resume I/O to the remote device. */ - isci_device_set_host_quiesce_lock_state(isci_dev, false); - return TMF_RESP_FUNC_COMPLETE; } -- cgit v0.10.2 From 6ad31fec306d532031b2f778f8656385df1b9d8f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 4 Mar 2011 12:10:29 -0800 Subject: isci: replace isci_remote_device completion with event queue Replace the device completion infrastructure with the controller wide event queue. There was a potential for the stop and ready notifications to corrupt each other, now that cannot happen. The stop pending flag cannot be used until devices are statically allocated. We temporarily need to maintain a completion to handle waiting for an object that has disappeared, but we can at least stop scribbling on freed memory. A future change will also get rid of the "stopping" state as it should not be exposed to the rest of the driver. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/events.c b/drivers/scsi/isci/events.c index c5cbaed..9d58e45 100644 --- a/drivers/scsi/isci/events.c +++ b/drivers/scsi/isci/events.c @@ -526,7 +526,7 @@ void isci_event_remote_device_start_complete( /** * isci_event_remote_device_stop_complete() - This user callback method will * inform the user that a stop operation has completed. - * @controller: This parameter specifies the core controller associated with + * @scic: This parameter specifies the core controller associated with * the completion callback. * @remote_device: This parameter specifies the remote device associated with * the completion callback. @@ -534,28 +534,20 @@ void isci_event_remote_device_start_complete( * operation. * */ -void isci_event_remote_device_stop_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - enum sci_status completion_status) +void isci_event_remote_device_stop_complete(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + enum sci_status completion_status) { - struct isci_host *isci_host; - struct isci_remote_device *isci_device; + struct isci_host *ihost; + struct isci_remote_device *idev; - isci_host = - (struct isci_host *)sci_object_get_association(controller); + ihost = sci_object_get_association(scic); + idev = sci_object_get_association(sci_dev); - isci_device = - (struct isci_remote_device *)sci_object_get_association( - remote_device - ); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); - - isci_remote_device_stop_complete( - isci_host, isci_device, completion_status); + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", __func__, idev); + isci_remote_device_stop_complete(ihost, idev, completion_status); } /** diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index da0c0da..8d25566 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -345,7 +345,7 @@ void isci_host_deinit(struct isci_host *ihost) list_for_each_entry_safe(idev, d, &port->remote_dev_list, node) { isci_remote_device_change_state(idev, isci_stopping); - isci_remote_device_stop(idev); + isci_remote_device_stop(ihost, idev); } } diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 7c1f0b5..6a6304c 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -212,6 +212,19 @@ static inline void wait_for_stop(struct isci_host *ihost) wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags)); } +static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev) +{ + wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags)); +} + +static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) +{ + /* todo switch to: + * wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags)); + * once devices are statically allocated + */ + wait_for_completion(idev->cmp); +} /** * isci_host_from_sas_ha() - This accessor retrieves the isci_host object diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index fc1f244..db2259c 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -95,6 +95,11 @@ static void isci_remote_device_deconstruct( scic_remote_device_destruct(to_sci_dev(isci_device)); isci_device->domain_dev->lldd_dev = NULL; list_del(&isci_device->node); + + clear_bit(IDEV_STOP_PENDING, &isci_device->flags); + clear_bit(IDEV_START_PENDING, &isci_device->flags); + wake_up(&isci_host->eventq); + complete(isci_device->cmp); kmem_cache_free(isci_kmem_cache, isci_device); } @@ -279,30 +284,22 @@ isci_remote_device_alloc(struct isci_host *isci_host, struct isci_port *port) * isci_remote_device_ready() - This function is called by the scic when the * remote device is ready. We mark the isci device as ready and signal the * waiting proccess. - * @isci_host: This parameter specifies the isci host object. - * @isci_device: This parameter specifies the remote device + * @idev: This parameter specifies the remote device * */ -void isci_remote_device_ready(struct isci_remote_device *isci_device) +void isci_remote_device_ready(struct isci_remote_device *idev) { + struct isci_host *ihost = idev->isci_port->isci_host; unsigned long flags; - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); - - /* device ready is actually a "ready for io" state. */ - if (isci_device->status == isci_starting || - isci_device->status == isci_ready) { - spin_lock_irqsave(&isci_device->isci_port->remote_device_lock, - flags); - isci_remote_device_change_state(isci_device, isci_ready_for_io); - if (isci_device->completion) - complete(isci_device->completion); - spin_unlock_irqrestore( - &isci_device->isci_port->remote_device_lock, - flags); - } + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + spin_lock_irqsave(&idev->isci_port->remote_device_lock, flags); + isci_remote_device_change_state(idev, isci_ready_for_io); + if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) + wake_up(&ihost->eventq); + spin_unlock_irqrestore(&idev->isci_port->remote_device_lock, flags); } /** @@ -341,8 +338,6 @@ void isci_remote_device_stop_complete( struct isci_remote_device *isci_device, enum sci_status status) { - struct completion *completion = isci_device->completion; - dev_dbg(&isci_host->pdev->dev, "%s: complete isci_device = %p, status = 0x%x\n", __func__, @@ -354,9 +349,6 @@ void isci_remote_device_stop_complete( /* after stop, we can tear down resources. */ isci_remote_device_deconstruct(isci_host, isci_device); - /* notify interested parties. */ - if (completion) - complete(completion); } /** @@ -385,40 +377,33 @@ void isci_remote_device_start_complete( * * The status of the scic request to stop. */ -enum sci_status isci_remote_device_stop( - struct isci_remote_device *isci_device) +enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) { enum sci_status status; unsigned long flags; - DECLARE_COMPLETION_ONSTACK(completion); - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); - - isci_remote_device_change_state(isci_device, isci_stopping); - - /* We need comfirmation that stop completed. */ - isci_device->completion = &completion; + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); - BUG_ON(isci_device->isci_port == NULL); - BUG_ON(isci_device->isci_port->isci_host == NULL); + isci_remote_device_change_state(idev, isci_stopping); + set_bit(IDEV_STOP_PENDING, &idev->flags); + idev->cmp = &completion; - spin_lock_irqsave(&isci_device->isci_port->isci_host->scic_lock, flags); + spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_stop(to_sci_dev(isci_device), 50); + status = scic_remote_device_stop(to_sci_dev(idev), 50); - spin_unlock_irqrestore(&isci_device->isci_port->isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the stop complete callback. */ if (status == SCI_SUCCESS) - wait_for_completion(&completion); + wait_for_device_stop(ihost, idev); - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, - "%s: isci_device = %p - after completion wait\n", - __func__, isci_device); + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p - after completion wait\n", + __func__, idev); - isci_device->completion = NULL; return status; } @@ -428,18 +413,16 @@ enum sci_status isci_remote_device_stop( * @domain_device: This parameter specifies the libsas domain device. * */ -void isci_remote_device_gone( - struct domain_device *domain_dev) +void isci_remote_device_gone(struct domain_device *dev) { - struct isci_remote_device *isci_device = isci_dev_from_domain_dev( - domain_dev); + struct isci_host *ihost = dev->port->ha->lldd_ha; + struct isci_remote_device *idev = dev->lldd_dev; - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: domain_device = %p, isci_device = %p, isci_port = %p\n", - __func__, domain_dev, isci_device, isci_device->isci_port); + __func__, dev, idev, idev->isci_port); - if (isci_device != NULL) - isci_remote_device_stop(isci_device); + isci_remote_device_stop(ihost, idev); } @@ -462,7 +445,6 @@ int isci_remote_device_found(struct domain_device *domain_dev) struct asd_sas_phy *sas_phy; struct isci_remote_device *isci_device; enum sci_status status; - DECLARE_COMPLETION_ONSTACK(completion); isci_host = isci_host_from_sas_ha(domain_dev->port->ha); @@ -498,17 +480,10 @@ int isci_remote_device_found(struct domain_device *domain_dev) spin_lock_irqsave(&isci_port->remote_device_lock, flags); list_add_tail(&isci_device->node, &isci_port->remote_dev_list); - /* for the device ready event. */ - isci_device->completion = &completion; - + set_bit(IDEV_START_PENDING, &isci_device->flags); status = isci_remote_device_construct(isci_port, isci_device); - spin_unlock_irqrestore(&isci_port->remote_device_lock, flags); - /* wait for the device ready callback. */ - wait_for_completion(isci_device->completion); - isci_device->completion = NULL; - dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p\n", __func__, isci_device); @@ -524,6 +499,9 @@ int isci_remote_device_found(struct domain_device *domain_dev) return -ENODEV; } + /* wait for the device ready callback. */ + wait_for_device_start(isci_host, isci_device); + return 0; } /** diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index af03039..3c22137 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -61,12 +61,14 @@ struct scic_sds_remote_device; struct isci_remote_device { enum isci_status status; + #define IDEV_START_PENDING 0 + #define IDEV_STOP_PENDING 1 + unsigned long flags; + struct completion *cmp; struct isci_port *isci_port; struct domain_device *domain_dev; - struct completion *completion; struct list_head node; struct list_head reqs_in_process; - struct work_struct stop_work; spinlock_t state_lock; }; @@ -102,9 +104,8 @@ void isci_remote_device_stop_complete( struct isci_remote_device *, enum sci_status); -enum sci_status isci_remote_device_stop( - struct isci_remote_device *isci_device); - +enum sci_status isci_remote_device_stop(struct isci_host *ihost, + struct isci_remote_device *idev); void isci_remote_device_nuke_requests( struct isci_remote_device *isci_device); -- cgit v0.10.2 From d9c37390c4f02153188a64a7a89fa6798dc3ffc2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 3 Mar 2011 17:59:32 -0800 Subject: isci: preallocate remote devices Until we synchronize against device removal this limits the damage of use after free bugs to the driver's own objects. Unless we implement reference counting we need to ensure at least a subset of a remote device is valid at all times. We follow the lead of other libsas drivers that also preallocate devices. This also enforces maximum remote device accounting at the lldd layer, but the core may still run out of RNC's before we hit this limit. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 8d25566..ae5d460 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -378,8 +378,7 @@ static void __iomem *smu_base(struct isci_host *isci_host) int isci_host_init(struct isci_host *isci_host) { - int err = 0; - int index = 0; + int err = 0, i; enum sci_status status; struct scic_sds_controller *controller; union scic_oem_parameters scic_oem_params; @@ -509,13 +508,19 @@ int isci_host_init(struct isci_host *isci_host) if (!isci_host->dma_pool) return -ENOMEM; - for (index = 0; index < SCI_MAX_PORTS; index++) - isci_port_init(&isci_host->isci_ports[index], - isci_host, - index); + for (i = 0; i < SCI_MAX_PORTS; i++) + isci_port_init(&isci_host->isci_ports[i], isci_host, i); - for (index = 0; index < SCI_MAX_PHYS; index++) - isci_phy_init(&isci_host->phys[index], isci_host, index); + for (i = 0; i < SCI_MAX_PHYS; i++) + isci_phy_init(&isci_host->phys[i], isci_host, i); + + for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { + struct isci_remote_device *idev = idev_by_id(isci_host, i); + + INIT_LIST_HEAD(&idev->reqs_in_process); + INIT_LIST_HEAD(&idev->node); + spin_lock_init(&idev->state_lock); + } return 0; } diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 6a6304c..3c69f1f 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -61,6 +61,7 @@ /*#include "task.h"*/ #include "timers.h" #include "remote_device.h" +#include "scic_remote_device.h" #define DRV_NAME "isci" #define SCI_PCI_BAR_COUNT 2 @@ -117,8 +118,18 @@ struct isci_host { struct list_head requests_to_complete; struct list_head requests_to_abort; spinlock_t scic_lock; + + /* careful only access this via idev_by_id */ + struct isci_remote_device devices[0]; }; +static inline struct isci_remote_device *idev_by_id(struct isci_host *ihost, int i) +{ + void *p = ihost->devices; + + return p + i * (sizeof(struct isci_remote_device) + + scic_remote_device_get_object_size()); +} /** * struct isci_pci_info - This class represents the pci function containing the @@ -219,11 +230,7 @@ static inline void wait_for_device_start(struct isci_host *ihost, struct isci_re static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) { - /* todo switch to: - * wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags)); - * once devices are statically allocated - */ - wait_for_completion(idev->cmp); + wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags)); } /** diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index f1b8a51..2838bef 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -64,7 +64,6 @@ #include "sci_environment.h" static struct scsi_transport_template *isci_transport_template; -struct kmem_cache *isci_kmem_cache; static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { { PCI_VDEVICE(INTEL, 0x1D61),}, @@ -443,7 +442,10 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) struct Scsi_Host *shost; int err; - isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL); + isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host) + + SCI_MAX_REMOTE_DEVICES * + (sizeof(struct isci_remote_device) + + scic_remote_device_get_object_size()), GFP_KERNEL); if (!isci_host) return NULL; @@ -656,31 +658,17 @@ static void __devexit isci_pci_remove(struct pci_dev *pdev) static __init int isci_init(void) { - int err = -ENOMEM; + int err; pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME); - isci_kmem_cache = kmem_cache_create(DRV_NAME, - sizeof(struct isci_remote_device) + - scic_remote_device_get_object_size(), - 0, 0, NULL); - if (!isci_kmem_cache) - return err; - isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); if (!isci_transport_template) - goto err_kmem; + return -ENOMEM; err = pci_register_driver(&isci_pci_driver); if (err) - goto err_sas; - - return 0; - - err_sas: - sas_release_transport(isci_transport_template); - err_kmem: - kmem_cache_destroy(isci_kmem_cache); + sas_release_transport(isci_transport_template); return err; } @@ -689,7 +677,6 @@ static __exit void isci_exit(void) { pci_unregister_driver(&isci_pci_driver); sas_release_transport(isci_transport_template); - kmem_cache_destroy(isci_kmem_cache); } MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 9b9aa50..24c67b0 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -89,7 +89,6 @@ #include "task.h" #include "sata.h" -extern struct kmem_cache *isci_kmem_cache; extern struct isci_firmware *isci_firmware; #define ISCI_FW_NAME "isci/isci_firmware.bin" diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index db2259c..48556e4 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -67,40 +67,35 @@ /** * isci_remote_device_deconstruct() - This function frees an isci_remote_device. - * @isci_host: This parameter specifies the isci host object. - * @isci_device: This parameter specifies the remote device to be freed. + * @ihost: This parameter specifies the isci host object. + * @idev: This parameter specifies the remote device to be freed. * */ -static void isci_remote_device_deconstruct( - struct isci_host *isci_host, - struct isci_remote_device *isci_device) +static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_remote_device *idev) { - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); /* There should not be any outstanding io's. All paths to * here should go through isci_remote_device_nuke_requests. * If we hit this condition, we will need a way to complete * io requests in process */ - while (!list_empty(&isci_device->reqs_in_process)) { + while (!list_empty(&idev->reqs_in_process)) { - dev_err(&isci_host->pdev->dev, + dev_err(&ihost->pdev->dev, "%s: ** request list not empty! **\n", __func__); BUG(); } - /* Remove all related references to this device and free - * the cache object. - */ - scic_remote_device_destruct(to_sci_dev(isci_device)); - isci_device->domain_dev->lldd_dev = NULL; - list_del(&isci_device->node); - - clear_bit(IDEV_STOP_PENDING, &isci_device->flags); - clear_bit(IDEV_START_PENDING, &isci_device->flags); - wake_up(&isci_host->eventq); - complete(isci_device->cmp); - kmem_cache_free(isci_kmem_cache, isci_device); + scic_remote_device_destruct(to_sci_dev(idev)); + idev->domain_dev->lldd_dev = NULL; + idev->domain_dev = NULL; + idev->isci_port = NULL; + list_del_init(&idev->node); + + clear_bit(IDEV_START_PENDING, &idev->flags); + clear_bit(IDEV_STOP_PENDING, &idev->flags); + wake_up(&ihost->eventq); } @@ -259,25 +254,27 @@ void isci_remote_device_nuke_requests( * pointer to new isci_remote_device. */ static struct isci_remote_device * -isci_remote_device_alloc(struct isci_host *isci_host, struct isci_port *port) +isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) { - struct isci_remote_device *isci_device; + struct isci_remote_device *idev; + int i; - isci_device = kmem_cache_zalloc(isci_kmem_cache, GFP_KERNEL); + for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { + idev = idev_by_id(ihost, i); + if (!test_and_set_bit(IDEV_ALLOCATED, &idev->flags)) + break; + } - if (!isci_device) { - dev_warn(&isci_host->pdev->dev, "%s: failed\n", __func__); + if (i >= SCI_MAX_REMOTE_DEVICES) { + dev_warn(&ihost->pdev->dev, "%s: failed\n", __func__); return NULL; } - INIT_LIST_HEAD(&isci_device->reqs_in_process); - INIT_LIST_HEAD(&isci_device->node); - - spin_lock_init(&isci_device->state_lock); - isci_remote_device_change_state(isci_device, isci_freed); - - return isci_device; + BUG_ON(!list_empty(&idev->reqs_in_process)); + BUG_ON(!list_empty(&idev->node)); + isci_remote_device_change_state(idev, isci_freed); + return idev; } /** @@ -381,24 +378,22 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem { enum sci_status status; unsigned long flags; - DECLARE_COMPLETION_ONSTACK(completion); dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, idev); isci_remote_device_change_state(idev, isci_stopping); set_bit(IDEV_STOP_PENDING, &idev->flags); - idev->cmp = &completion; spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_stop(to_sci_dev(idev), 50); - spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the stop complete callback. */ - if (status == SCI_SUCCESS) + if (status == SCI_SUCCESS) { wait_for_device_stop(ihost, idev); + clear_bit(IDEV_ALLOCATED, &idev->flags); + } dev_dbg(&ihost->pdev->dev, "%s: idev = %p - after completion wait\n", @@ -469,6 +464,8 @@ int isci_remote_device_found(struct domain_device *domain_dev) return -ENODEV; isci_device = isci_remote_device_alloc(isci_host, isci_port); + if (!isci_device) + return -ENODEV; INIT_LIST_HEAD(&isci_device->node); domain_dev->lldd_dev = isci_device; diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 3c22137..f45a5f0 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -63,8 +63,8 @@ struct isci_remote_device { enum isci_status status; #define IDEV_START_PENDING 0 #define IDEV_STOP_PENDING 1 + #define IDEV_ALLOCATED 2 unsigned long flags; - struct completion *cmp; struct isci_port *isci_port; struct domain_device *domain_dev; struct list_head node; -- cgit v0.10.2 From 1a38045ba88ed3bee6c57444670fb639c8b61be7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 3 Mar 2011 18:01:43 -0800 Subject: isci: replace remote_device_lock with scic_lock The remote_device_lock is currently used to protect a controller global resource (RNCs), but the remote_device_lock is per-port. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 30da3ec..a5b2565 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -94,7 +94,6 @@ void isci_port_init( INIT_LIST_HEAD(&isci_port->remote_dev_list); INIT_LIST_HEAD(&isci_port->domain_dev_list); - spin_lock_init(&isci_port->remote_device_lock); spin_lock_init(&isci_port->state_lock); init_completion(&isci_port->start_complete); isci_port->isci_host = isci_host; diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index b864d70..b7a7dd7 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -90,7 +90,6 @@ struct isci_port { struct isci_host *isci_host; struct asd_sas_port sas_port; struct list_head remote_dev_list; - spinlock_t remote_device_lock; spinlock_t state_lock; struct list_head domain_dev_list; struct completion start_complete; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 48556e4..1dae218 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -287,16 +287,13 @@ isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) void isci_remote_device_ready(struct isci_remote_device *idev) { struct isci_host *ihost = idev->isci_port->isci_host; - unsigned long flags; dev_dbg(&ihost->pdev->dev, - "%s: isci_device = %p\n", __func__, idev); + "%s: idev = %p\n", __func__, idev); - spin_lock_irqsave(&idev->isci_port->remote_device_lock, flags); isci_remote_device_change_state(idev, isci_ready_for_io); if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) wake_up(&ihost->eventq); - spin_unlock_irqrestore(&idev->isci_port->remote_device_lock, flags); } /** @@ -432,7 +429,6 @@ void isci_remote_device_gone(struct domain_device *dev) */ int isci_remote_device_found(struct domain_device *domain_dev) { - unsigned long flags; struct isci_host *isci_host; struct isci_port *isci_port; struct isci_phy *isci_phy; @@ -474,12 +470,12 @@ int isci_remote_device_found(struct domain_device *domain_dev) isci_remote_device_change_state(isci_device, isci_starting); - spin_lock_irqsave(&isci_port->remote_device_lock, flags); + spin_lock_irq(&isci_host->scic_lock); list_add_tail(&isci_device->node, &isci_port->remote_dev_list); set_bit(IDEV_START_PENDING, &isci_device->flags); status = isci_remote_device_construct(isci_port, isci_device); - spin_unlock_irqrestore(&isci_port->remote_device_lock, flags); + spin_unlock_irq(&isci_host->scic_lock); dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p\n", @@ -487,12 +483,12 @@ int isci_remote_device_found(struct domain_device *domain_dev) if (status != SCI_SUCCESS) { - spin_lock_irqsave(&isci_port->remote_device_lock, flags); + spin_lock_irq(&isci_host->scic_lock); isci_remote_device_deconstruct( isci_host, isci_device ); - spin_unlock_irqrestore(&isci_port->remote_device_lock, flags); + spin_unlock_irq(&isci_host->scic_lock); return -ENODEV; } -- cgit v0.10.2 From 5409bc3a20b239d1b3919db451ee4f6513e64ed1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Mar 2011 21:30:28 -0800 Subject: isci: cleanup debug leftovers in isci.h Reported-by: James Bottomley Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 24c67b0..b3f63f1 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -53,21 +53,8 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the isci_module object definition. - * - * isci.h - */ - -#if !defined(_SCI_MODULE_H_) -#define _SCI_MODULE_H_ - -/** - * This file contains the SCI low level driver interface to the SCI and Libsas - * Libraries. - * - * isci.h - */ +#ifndef __ISCI_H__ +#define __ISCI_H__ #include #include @@ -136,11 +123,4 @@ enum sci_status isci_parse_user_parameters( int scu_index, struct isci_firmware *fw); -#ifdef ISCI_SLAVE_ALLOC -extern int ISCI_SLAVE_ALLOC(struct scsi_device *scsi_dev); -#endif /* ISCI_SLAVE_ALLOC */ - -#ifdef ISCI_SLAVE_DESTROY -extern void ISCI_SLAVE_DESTROY(struct scsi_device *scsi_dev); -#endif /* ISCI_SLAVE_DESTROY */ -#endif /* !defined(_SCI_MODULE_H_) */ +#endif /* __ISCI_H__ */ -- cgit v0.10.2 From 18d3d72a42a846d46b71131982c51d63eba2b7b3 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:38 -0800 Subject: isci: isci_request_cleanup_completed_loiterer checks task before task_done In the condition where outstanding I/Os are being cleaned from the device requests in process list, the cleanup function needs to check that the request is actually a sas-task and not a task management function. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 98204b0..779f6cf 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -631,13 +631,16 @@ static void isci_request_cleanup_completed_loiterer( struct isci_remote_device *isci_device, struct isci_request *isci_request) { - struct sas_task *task = isci_request_access_task(isci_request); - unsigned long flags; + struct sas_task *task; + unsigned long flags; + + task = (isci_request->ttype == io_task) + ? isci_request_access_task(isci_request) + : NULL; dev_dbg(&isci_host->pdev->dev, "%s: isci_device=%p, request=%p, task=%p\n", - __func__, isci_device, isci_request, - isci_request->ttype_ptr.io_task_ptr); + __func__, isci_device, isci_request, task); spin_lock_irqsave(&isci_host->scic_lock, flags); list_del_init(&isci_request->dev_node); -- cgit v0.10.2 From 11b00c194cfbd0eb0d90f32c096508b2bb8be6ec Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:40 -0800 Subject: isci: Changes in isci_host_completion_routine Changes to move management of the reqs_in_process entry for the request here. Made changes to note when the task is already in the abort path and cannot be completed through callbacks. Signed-off-by: Jeff Skirvin Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index ae5d460..153f419 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -270,27 +270,40 @@ static int isci_host_mdl_allocate_coherent( static void isci_host_completion_routine(unsigned long data) { struct isci_host *isci_host = (struct isci_host *)data; - struct list_head completed_request_list; - struct list_head aborted_request_list; - struct list_head *current_position; - struct list_head *next_position; + struct list_head completed_request_list; + struct list_head errored_request_list; + struct list_head *current_position; + struct list_head *next_position; struct isci_request *request; struct isci_request *next_request; - struct sas_task *task; + struct sas_task *task; INIT_LIST_HEAD(&completed_request_list); - INIT_LIST_HEAD(&aborted_request_list); + INIT_LIST_HEAD(&errored_request_list); spin_lock_irq(&isci_host->scic_lock); scic_sds_controller_completion_handler(isci_host->core_controller); /* Take the lists of completed I/Os from the host. */ + list_splice_init(&isci_host->requests_to_complete, &completed_request_list); - list_splice_init(&isci_host->requests_to_abort, - &aborted_request_list); + /* While holding the scic_lock take all of the normally completed + * I/Os off of the device's pending lists. + */ + list_for_each_entry(request, &completed_request_list, completed_node) { + + /* Remove the request from the remote device's list + * of pending requests. + */ + list_del_init(&request->dev_node); + } + + /* Take the list of errored I/Os from the host. */ + list_splice_init(&isci_host->requests_to_errorback, + &errored_request_list); spin_unlock_irq(&isci_host->scic_lock); @@ -309,13 +322,22 @@ static void isci_host_completion_routine(unsigned long data) request, task); - task->task_done(task); - task->lldd_task = NULL; + /* Return the task to libsas */ + if (task != NULL) { + + task->lldd_task = NULL; + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + /* If the task is already in the abort path, + * the task_done callback cannot be called. + */ + task->task_done(task); + } + } /* Free the request object. */ isci_request_free(isci_host, request); } - list_for_each_entry_safe(request, next_request, &aborted_request_list, + list_for_each_entry_safe(request, next_request, &errored_request_list, completed_node) { task = isci_request_access_task(request); @@ -327,8 +349,33 @@ static void isci_host_completion_routine(unsigned long data) request, task); - /* Put the task into the abort path. */ - sas_task_abort(task); + if (task != NULL) { + + /* Put the task into the abort path if it's not there + * already. + */ + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) + sas_task_abort(task); + + } else { + /* This is a case where the request has completed with a + * status such that it needed further target servicing, + * but the sas_task reference has already been removed + * from the request. Since it was errored, it was not + * being aborted, so there is nothing to do except free + * it. + */ + + spin_lock_irq(&isci_host->scic_lock); + /* Remove the request from the remote device's list + * of pending requests. + */ + list_del_init(&request->dev_node); + spin_unlock_irq(&isci_host->scic_lock); + + /* Free the request object. */ + isci_request_free(isci_host, request); + } } } @@ -477,7 +524,7 @@ int isci_host_init(struct isci_host *isci_host) INIT_LIST_HEAD(&(isci_host->mdl_struct_list)); INIT_LIST_HEAD(&isci_host->requests_to_complete); - INIT_LIST_HEAD(&isci_host->requests_to_abort); + INIT_LIST_HEAD(&isci_host->requests_to_errorback); spin_lock_irq(&isci_host->scic_lock); status = scic_controller_initialize(isci_host->core_controller); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 3c69f1f..889a785 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -116,7 +116,7 @@ struct isci_host { struct tasklet_struct completion_tasklet; struct list_head mdl_struct_list; struct list_head requests_to_complete; - struct list_head requests_to_abort; + struct list_head requests_to_errorback; spinlock_t scic_lock; /* careful only access this via idev_by_id */ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 6b0863e..8039f1c 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -836,7 +836,7 @@ static void isci_task_save_for_upper_layer_completion( status); /* Add to the aborted list. */ list_add(&request->completed_node, - &host->requests_to_abort); + &host->requests_to_errorback); break; default: @@ -849,7 +849,7 @@ static void isci_task_save_for_upper_layer_completion( /* Add to the aborted list. */ list_add(&request->completed_node, - &host->requests_to_abort); + &host->requests_to_errorback); break; } } @@ -1185,14 +1185,6 @@ void isci_request_io_request_complete( */ request->sci_request_handle = NULL; - /* Only remove the request from the remote device list - * of pending requests if we have not requested error - * handling on this request. - */ - if (complete_to_host != isci_perform_error_io_completion) - list_del_init(&request->dev_node); - - /* Save possible completion ptr. */ io_request_completion = request->io_request_completion; -- cgit v0.10.2 From a5fde225364df30507ba1a5aafeec85e595000d3 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:42 -0800 Subject: isci: fix completion / abort path. Corrected use of the request state_lock in the completion callback. In the case where an abort (or reset) thread is trying to terminate an I/O request, it sets the request state to "aborting" (or "terminating") if the state is still "starting". One of the bugs was to never set the state to "completed". Another was to not correctly recognize the situation where the I/O had completed but the sas_task was still pending callback to task_done - this was typically a problem in the LUN and device reset cases. It is now possible that we leave isci_task_abort_task() with request->io_request_completion pointing to localy allocated aborted_io_completion struct. It may result in a system crash. Signed-off-by: Jeff Skirvin Signed-off-by: Maciej Trela Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 8039f1c..c88e270 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -814,9 +814,8 @@ static void isci_task_save_for_upper_layer_completion( break; case isci_perform_aborted_io_completion: - /* - * No notification because this request is already - * in the abort path. + /* No notification to libsas because this request is + * already in the abort path. */ dev_warn(&host->pdev->dev, "%s: Aborted - task = %p, response=%d, status=%d\n", @@ -824,6 +823,19 @@ static void isci_task_save_for_upper_layer_completion( task, response, status); + + /* Wake up whatever process was waiting for this + * request to complete. + */ + WARN_ON(request->io_request_completion == NULL); + + if (request->io_request_completion != NULL) { + + /* Signal whoever is waiting that this + * request is complete. + */ + complete(request->io_request_completion); + } break; case isci_perform_error_io_completion: @@ -847,7 +859,7 @@ static void isci_task_save_for_upper_layer_completion( response, status); - /* Add to the aborted list. */ + /* Add to the error to libsas list. */ list_add(&request->completed_node, &host->requests_to_errorback); break; @@ -873,8 +885,6 @@ void isci_request_io_request_complete( struct ssp_response_iu *resp_iu; void *resp_buf; unsigned long task_flags; - unsigned long state_flags; - struct completion *io_request_completion; struct isci_remote_device *isci_device = request->isci_device; enum service_response response = SAS_TASK_UNDELIVERED; enum exec_status status = SAS_ABORTED_TASK; @@ -891,9 +901,8 @@ void isci_request_io_request_complete( task->data_dir, completion_status); - spin_lock_irqsave(&request->state_lock, state_flags); + spin_lock(&request->state_lock); request_status = isci_request_get_state(request); - spin_unlock_irqrestore(&request->state_lock, state_flags); /* Decode the request status. Note that if the request has been * aborted by a task management function, we don't care @@ -928,6 +937,8 @@ void isci_request_io_request_complete( complete_to_host = isci_perform_aborted_io_completion; /* This was an aborted request. */ + + spin_unlock(&request->state_lock); break; case aborting: @@ -955,6 +966,8 @@ void isci_request_io_request_complete( complete_to_host = isci_perform_aborted_io_completion; /* This was an aborted request. */ + + spin_unlock(&request->state_lock); break; case terminating: @@ -977,13 +990,20 @@ void isci_request_io_request_complete( else status = SAS_ABORTED_TASK; - complete_to_host = isci_perform_normal_io_completion; + complete_to_host = isci_perform_aborted_io_completion; /* This was a terminated request. */ + + spin_unlock(&request->state_lock); break; default: + /* The request is done from an SCU HW perspective. */ + request->status = completed; + + spin_unlock(&request->state_lock); + /* This is an active request being completed from the core. */ switch (completion_status) { @@ -1185,20 +1205,6 @@ void isci_request_io_request_complete( */ request->sci_request_handle = NULL; - /* Save possible completion ptr. */ - io_request_completion = request->io_request_completion; - - if (io_request_completion) { - - /* This is inherantly a regular I/O request, - * since we are currently in the regular - * I/O completion callback function. - * Signal whoever is waiting that this - * request is complete. - */ - complete(io_request_completion); - } - isci_host_can_dequeue(isci_host, 1); } diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 779f6cf..02c40c0 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -618,9 +618,6 @@ static enum isci_request_status isci_task_validate_request_to_abort( old_state = isci_request_change_started_to_aborted( isci_request, aborted_io_completion); - /* Only abort requests in the started state. */ - if (old_state != started) - old_state = unallocated; } return old_state; @@ -644,10 +641,23 @@ static void isci_request_cleanup_completed_loiterer( spin_lock_irqsave(&isci_host->scic_lock, flags); list_del_init(&isci_request->dev_node); - if (task != NULL) - task->lldd_task = NULL; spin_unlock_irqrestore(&isci_host->scic_lock, flags); + if (task != NULL) { + + spin_lock_irqsave(&task->task_state_lock, flags); + task->lldd_task = NULL; + + isci_set_task_doneflags(task); + + /* If this task is not in the abort path, call task_done. */ + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + + spin_unlock_irqrestore(&task->task_state_lock, flags); + task->task_done(task); + } else + spin_unlock_irqrestore(&task->task_state_lock, flags); + } isci_request_free(isci_host, isci_request); } /** @@ -684,17 +694,20 @@ static void isci_terminate_request_core( spin_lock_irqsave(&isci_request->state_lock, flags); request_status = isci_request_get_state(isci_request); - /* TMFs are in their own thread */ - if ((isci_request->ttype == io_task) && - ((request_status == aborted) || - (request_status == aborting) || - (request_status == terminating))) + if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ + && ((request_status == aborted) + || (request_status == aborting) + || (request_status == terminating) + || (request_status == completed) + ) + ) { + /* The completion routine won't free a request in * the aborted/aborting/terminating state, so we do * it here. */ needs_cleanup_handling = true; - + } spin_unlock_irqrestore(&isci_request->state_lock, flags); spin_lock_irqsave(&isci_host->scic_lock, flags); @@ -765,10 +778,10 @@ static void isci_terminate_request( new_request_state ); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + if ((old_state == started) || (old_state == completed)) { - if (old_state == started) - /* This request was not already being aborted. If it had been, + /* If the old_state is started: + * This request was not already being aborted. If it had been, * then the aborting I/O (ie. the TMF request) would not be in * the aborting state, and thus would be terminated here. Note * that since the TMF completion's call to the kernel function @@ -777,9 +790,15 @@ static void isci_terminate_request( * special wait here for already aborting requests - the * termination of the TMF request will force the request * to finish it's already started terminate. + * + * If old_state == completed: + * This request completed from the SCU hardware perspective + * and now just needs cleaning up in terms of freeing the + * request and potentially calling up to libsas. */ isci_terminate_request_core(isci_host, isci_device, isci_request, &request_completion); + } } /** @@ -863,10 +882,6 @@ void isci_terminate_pending_requests( isci_terminate_request(isci_host, isci_device, isci_request, new_request_state ); - - /* Set the 'done' state on the task. */ - if (task) - isci_task_all_done(task); } } while (!done); } @@ -1067,13 +1082,15 @@ static void isci_abort_task_process_cb( int isci_task_abort_task(struct sas_task *task) { DECLARE_COMPLETION_ONSTACK(aborted_io_completion); - struct isci_request *old_request = NULL; + struct isci_request *old_request = NULL; + enum isci_request_status old_state; struct isci_remote_device *isci_device = NULL; - struct isci_host *isci_host = NULL; - struct isci_tmf tmf; - int ret = TMF_RESP_FUNC_FAILED; - unsigned long flags; - bool any_dev_reset, device_stopping; + struct isci_host *isci_host = NULL; + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + bool any_dev_reset = false; + bool device_stopping; /* Get the isci_request reference from the task. Note that * this check does not depend on the pending request list @@ -1093,21 +1110,6 @@ int isci_task_abort_task(struct sas_task *task) device_stopping = (isci_device->status == isci_stopping) || (isci_device->status == isci_stopped); -#ifdef NOMORE - /* This abort task function is the first stop of the libsas error - * handler thread. Since libsas is executing in a thread with a - * referernce to the "task" parameter, that task cannot be completed - * directly back to the upper layers. In order to make sure that - * the task is managed correctly if this abort task fails, set the - * "SAS_TASK_STATE_ABORTED" bit now such that completions up the - * stack will be intercepted and only allowed to happen in the - * libsas SCSI error handler thread. - */ - spin_lock_irqsave(&task->task_state_lock, flags); - task->task_state_flags |= SAS_TASK_STATE_ABORTED; - spin_unlock_irqrestore(&task->task_state_lock, flags); -#endif /* NOMORE */ - /* This version of the driver will fail abort requests for * SATA/STP. Failing the abort request this way will cause the * SCSI error handler thread to escalate to LUN reset @@ -1123,35 +1125,27 @@ int isci_task_abort_task(struct sas_task *task) dev_dbg(&isci_host->pdev->dev, "%s: old_request == %p\n", __func__, old_request); + if (!device_stopping) + any_dev_reset = isci_device_is_reset_pending(isci_host,isci_device); + spin_lock_irqsave(&task->task_state_lock, flags); /* Don't do resets to stopping devices. */ - if (device_stopping) - task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + if (device_stopping) { - /* See if there is a pending device reset for this device. */ - any_dev_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET; - - spin_unlock_irqrestore(&task->task_state_lock, flags); + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + any_dev_reset = false; - if ((isci_device != NULL) && !device_stopping) + } else /* See if there is a pending device reset for this device. */ any_dev_reset = any_dev_reset - || isci_device_is_reset_pending(isci_host, - isci_device - ); + || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET); /* If the extraction of the request reference from the task * failed, then the request has been completed (or if there is a * pending reset then this abort request function must be failed * in order to escalate to the target reset). */ - if ((old_request == NULL) || - ((old_request != NULL) && - (old_request->sci_request_handle == NULL) && - (old_request->complete_in_target)) || - any_dev_reset) { - - spin_lock_irqsave(&task->task_state_lock, flags); + if ((old_request == NULL) || any_dev_reset) { /* If the device reset task flag is set, fail the task * management request. Otherwise, the original request @@ -1164,6 +1158,11 @@ int isci_task_abort_task(struct sas_task *task) */ task->task_state_flags &= ~SAS_TASK_STATE_DONE; + /* Make the reset happen as soon as possible. */ + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + + spin_unlock_irqrestore(&task->task_state_lock, flags); + /* Fail the task management request in order to * escalate to the target reset. */ @@ -1176,13 +1175,8 @@ int isci_task_abort_task(struct sas_task *task) "task %p on dev %p\n", __func__, task, isci_device); - } else { - ret = TMF_RESP_FUNC_COMPLETE; - - dev_dbg(&isci_host->pdev->dev, - "%s: abort task not needed for %p\n", - __func__, task); + } else { /* The request has already completed and there * is nothing to do here other than to set the task * done bit, and indicate that the task abort function @@ -1190,89 +1184,65 @@ int isci_task_abort_task(struct sas_task *task) */ isci_set_task_doneflags(task); - /* Set the abort bit to make sure that libsas sticks the - * task in the completed task queue. - */ -/* task->task_state_flags |= SAS_TASK_STATE_ABORTED; */ + spin_unlock_irqrestore(&task->task_state_lock, flags); - /* Check for the situation where the request was - * left around on the device list but the - * request already completed. - */ - if (old_request && !old_request->sci_request_handle) { + ret = TMF_RESP_FUNC_COMPLETE; - isci_request_cleanup_completed_loiterer( - isci_host, isci_device, old_request - ); - } + dev_dbg(&isci_host->pdev->dev, + "%s: abort task not needed for %p\n", + __func__, task); } - spin_unlock_irqrestore(&task->task_state_lock, flags); return ret; } + else + spin_unlock_irqrestore(&task->task_state_lock, flags); spin_lock_irqsave(&isci_host->scic_lock, flags); - /* Sanity check the request status, and set the I/O kernel completion + /* Check the request status and change to "aborting" if currently + * "starting"; if true then set the I/O kernel completion * struct that will be triggered when the request completes. */ - if (isci_task_validate_request_to_abort( - old_request, - isci_host, - isci_device, - &aborted_io_completion) - == unallocated) { - dev_dbg(&isci_host->pdev->dev, - "%s: old_request not valid for device = %p\n", - __func__, - isci_device); - old_request = NULL; - } - - if (!old_request) { - - /* There is no isci_request attached to the sas_task. - * It must have been completed and detached. - */ - dev_dbg(&isci_host->pdev->dev, - "%s: old_request == NULL\n", - __func__); + old_state = isci_task_validate_request_to_abort( + old_request, isci_host, isci_device, + &aborted_io_completion); + if ((old_state != started) && (old_state != completed)) { spin_unlock_irqrestore(&isci_host->scic_lock, flags); - /* Set the state on the task. */ - isci_task_all_done(task); + /* The request was already being handled by someone else (because + * they got to set the state away from started). + */ + dev_dbg(&isci_host->pdev->dev, + "%s: device = %p; old_request %p already being aborted\n", + __func__, + isci_device, old_request); return TMF_RESP_FUNC_COMPLETE; } - if (task->task_proto == SAS_PROTOCOL_SMP || device_stopping) { - - if (device_stopping) - dev_dbg(&isci_host->pdev->dev, - "%s: device is stopping, thus no TMF\n", - __func__); - else - dev_dbg(&isci_host->pdev->dev, - "%s: request is SMP, thus no TMF\n", - __func__); - - old_request->complete_in_target = true; + if ((task->task_proto == SAS_PROTOCOL_SMP) + || device_stopping + || old_request->complete_in_target + ) { spin_unlock_irqrestore(&isci_host->scic_lock, flags); + dev_dbg(&isci_host->pdev->dev, + "%s: SMP request (%d)" + " or device is stopping (%d)" + " or complete_in_target (%d), thus no TMF\n", + __func__, (task->task_proto == SAS_PROTOCOL_SMP), + device_stopping, old_request->complete_in_target); + /* Set the state on the task. */ isci_task_all_done(task); ret = TMF_RESP_FUNC_COMPLETE; /* Stopping and SMP devices are not sent a TMF, and are not - * reset, but the outstanding I/O request is terminated here. - * - * Clean up the request on our side, and wait for the aborted - * I/O to complete. + * reset, but the outstanding I/O request is terminated below. */ - isci_terminate_request_core(isci_host, isci_device, old_request, - &aborted_io_completion); } else { /* Fill in the tmf stucture */ isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_task_abort, @@ -1288,23 +1258,23 @@ int isci_task_abort_task(struct sas_task *task) ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_ABORT_TASK_TIMEOUT_MS); - if (ret == TMF_RESP_FUNC_COMPLETE) { - old_request->complete_in_target = true; - - /* Clean up the request on our side, and wait for the aborted I/O to - * complete. - */ - isci_terminate_request_core(isci_host, isci_device, old_request, - &aborted_io_completion); - - /* Set the state on the task. */ - isci_task_all_done(task); - } else + if (ret != TMF_RESP_FUNC_COMPLETE) dev_err(&isci_host->pdev->dev, "%s: isci_task_send_tmf failed\n", __func__); } + if (ret == TMF_RESP_FUNC_COMPLETE) { + old_request->complete_in_target = true; + + /* Clean up the request on our side, and wait for the aborted I/O to + * complete. + */ + isci_terminate_request_core(isci_host, isci_device, old_request, + &aborted_io_completion); + } + /* Make sure we do not leave a reference to aborted_io_completion */ + old_request->io_request_completion = NULL; return ret; } -- cgit v0.10.2 From ec6c9638b0d0537430f78a3e20503b5e68a537b6 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:44 -0800 Subject: isci: Any reset indicated on an I/O completion escalates it to the error path. If there is a pending device reset, the I/O is used to accomplish the reset by setting the RESET bit in the task status, and then putting the task into the error handler path using sas abort task. Signed-off-by: Jeff Skirvin Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 153f419..dc231c2 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -290,17 +290,6 @@ static void isci_host_completion_routine(unsigned long data) list_splice_init(&isci_host->requests_to_complete, &completed_request_list); - /* While holding the scic_lock take all of the normally completed - * I/Os off of the device's pending lists. - */ - list_for_each_entry(request, &completed_request_list, completed_node) { - - /* Remove the request from the remote device's list - * of pending requests. - */ - list_del_init(&request->dev_node); - } - /* Take the list of errored I/Os from the host. */ list_splice_init(&isci_host->requests_to_errorback, &errored_request_list); diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index c88e270..6cd80bb 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -790,9 +790,9 @@ static void isci_task_save_for_upper_layer_completion( { struct sas_task *task = isci_request_access_task(request); - isci_task_set_completion_status(task, response, status, - task_notification_selection); - + task_notification_selection + = isci_task_set_completion_status(task, response, status, + task_notification_selection); /* Tasks aborted specifically by a call to the lldd_abort_task * function should not be completed to the host in the regular path. @@ -811,6 +811,9 @@ static void isci_task_save_for_upper_layer_completion( /* Add to the completed list. */ list_add(&request->completed_node, &host->requests_to_complete); + + /* Take the request off the device's pending request list. */ + list_del_init(&request->dev_node); break; case isci_perform_aborted_io_completion: diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index ced6a8b..68d8e5e 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -280,9 +280,10 @@ static inline void isci_task_all_done( * @response: This parameter is the response code for the completed task. * @status: This parameter is the status code for the completed task. * - * none. - */ -static inline void isci_task_set_completion_status( +* @return The new notification mode for the request. +*/ +static inline enum isci_completion_selection +isci_task_set_completion_status( struct sas_task *task, enum service_response response, enum exec_status status, @@ -295,15 +296,41 @@ static inline void isci_task_set_completion_status( task->task_status.resp = response; task->task_status.stat = status; - /* Don't set DONE (or clear AT_INITIATOR) for any task going into the - * error path, because the EH interprets that as a handled error condition. - * Also don't take action if there is a reset pending. - */ - if ((task_notification_selection != isci_perform_error_io_completion) - && !(task->task_state_flags & SAS_TASK_NEED_DEV_RESET)) - isci_set_task_doneflags(task); + /* If a device reset is being indicated, make sure the I/O + * is in the error path. + */ + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + task_notification_selection = isci_perform_error_io_completion; + + switch (task_notification_selection) { + + case isci_perform_aborted_io_completion: + /* This path can occur with task-managed requests as well as + * requests terminated because of LUN or device resets. + */ + /* Fall through to the normal case... */ + + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + isci_set_task_doneflags(task); + break; + + default: + WARN_ON(FALSE); + /* Fall through to the error case... */ + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + /* Leave SAS_TASK_STATE_DONE clear + * Leave SAS_TASK_AT_INITIATOR set. + */ + break; + } spin_unlock_irqrestore(&task->task_state_lock, flags); + + return task_notification_selection; + } /** * isci_task_complete_for_upper_layer() - This function completes the request @@ -322,9 +349,9 @@ static inline void isci_task_complete_for_upper_layer( enum exec_status status, enum isci_completion_selection task_notification_selection) { - isci_task_set_completion_status(task, response, status, - task_notification_selection); - + task_notification_selection + = isci_task_set_completion_status(task, response, status, + task_notification_selection); /* Tasks aborted specifically by a call to the lldd_abort_task * function should not be completed to the host in the regular path. -- cgit v0.10.2 From 1fad9e934a43407c1ba397b1b6b8882aa8a2cafd Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:46 -0800 Subject: isci: save the i/o tag outside the scic request structure. The pointer to the core representation of a request is marked NULL at completion, but we need to save the i/o tag for task management. Signed-off-by: Jeff Skirvin Signed-off-by: Jacek Danecki [revise changelog] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 6cd80bb..f19a952 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -463,6 +463,12 @@ int isci_request_execute( */ status = SCI_SUCCESS; } + else + /* Save the tag for possible task mgmt later. */ + request->io_tag = scic_io_request_get_io_tag( + request->sci_request_handle); + + } else dev_warn(&isci_host->pdev->dev, "%s: failed request start\n", diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 02c40c0..e9bfc22 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -544,7 +544,7 @@ void isci_task_build_tmf( void (*tmf_sent_cb)(enum isci_tmf_cb_state, struct isci_tmf *, void *), - void *cb_data) + struct isci_request *old_request) { dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, "%s: isci_device = %p\n", __func__, isci_device); @@ -555,7 +555,9 @@ void isci_task_build_tmf( tmf->tmf_code = code; tmf->timeout_timer = NULL; tmf->cb_state_func = tmf_sent_cb; - tmf->cb_data = cb_data; + tmf->cb_data = old_request; + tmf->io_tag = old_request->io_tag; + } static struct isci_request *isci_task_get_request_from_task( @@ -1248,10 +1250,6 @@ int isci_task_abort_task(struct sas_task *task) isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_task_abort, isci_abort_task_process_cb, old_request); - tmf.io_tag = scic_io_request_get_io_tag( - old_request->sci_request_handle - ); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */ diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 68d8e5e..5a5a4ec 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -224,7 +224,7 @@ void isci_task_build_tmf( void (*tmf_sent_cb)( enum isci_tmf_cb_state, struct isci_tmf *, void *), - void *cb_data); + struct isci_request *old_request); int isci_task_execute_tmf( struct isci_host *isci_host, -- cgit v0.10.2 From f0846c68912545d70da16b2fbedded37ea4394d8 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Tue, 8 Mar 2011 19:22:07 -0700 Subject: isci: Cleaning up task execute path. Made sure the device ready check accounts for all states. Moved the aborted task check into the loop of pulling task requests off of the submitted list. Signed-off-by: Jeff Skirvin Signed-off-by: Jacek Danecki [remove host and device starting state checks] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index e9bfc22..3dc9ef3 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -83,21 +83,10 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) unsigned long flags; int ret; enum sci_status status; - + enum isci_status device_status; dev_dbg(task->dev->port->ha->dev, "%s: num=%d\n", __func__, num); - if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { - - isci_task_complete_for_upper_layer( - task, - SAS_TASK_UNDELIVERED, - SAM_STAT_TASK_ABORTED, - isci_perform_normal_io_completion - ); - - return 0; /* The I/O was accepted (and failed). */ - } if ((task->dev == NULL) || (task->dev->port == NULL)) { /* Indicate SAS_TASK_UNDELIVERED, so that the scsi midlayer @@ -143,93 +132,105 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) /* We don't have a valid host reference, so we * can't control the host queueing condition. */ - continue; + goto next_task; } device = isci_dev_from_domain_dev(task->dev); isci_host = isci_host_from_sas_ha(task->dev->port->ha); - if (device && device->status == isci_ready) { + if (device) + device_status = device->status; + else + device_status = isci_freed; + + /* From this point onward, any process that needs to guarantee + * that there is no kernel I/O being started will have to wait + * for the quiesce spinlock. + */ + + if (device_status != isci_ready_for_io) { /* Forces a retry from scsi mid layer. */ dev_warn(task->dev->port->ha->dev, "%s: task %p: isci_host->status = %d, " - "device = %p\n", + "device = %p; device_status = 0x%x\n\n", __func__, task, isci_host_get_state(isci_host), - device); - - if (device) - dev_dbg(task->dev->port->ha->dev, - "%s: device->status = 0x%x\n", - __func__, device->status); + device, device_status); - /* Indicate QUEUE_FULL so that the scsi midlayer - * retries. - */ - isci_task_complete_for_upper_layer( - task, - SAS_TASK_COMPLETE, - SAS_QUEUE_FULL, - isci_perform_normal_io_completion - ); + if (device_status == isci_ready) { + /* Indicate QUEUE_FULL so that the scsi midlayer + * retries. + */ + isci_task_complete_for_upper_layer( + task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL, + isci_perform_normal_io_completion + ); + } else { + /* Else, the device is going down. */ + isci_task_complete_for_upper_layer( + task, + SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN, + isci_perform_normal_io_completion + ); + } isci_host_can_dequeue(isci_host, 1); - } - /* the device is going down... */ - else if (!device || device->status != isci_ready_for_io) { + } else { + /* There is a device and it's ready for I/O. */ + spin_lock_irqsave(&task->task_state_lock, flags); - dev_dbg(task->dev->port->ha->dev, - "%s: task %p: isci_host->status = %d, " - "device = %p\n", - __func__, - task, - isci_host_get_state(isci_host), - device); + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { - if (device) - dev_dbg(task->dev->port->ha->dev, - "%s: device->status = 0x%x\n", - __func__, device->status); + spin_unlock_irqrestore(&task->task_state_lock, + flags); - /* Indicate SAS_TASK_UNDELIVERED, so that the scsi - * midlayer removes the target. - */ - isci_task_complete_for_upper_layer( - task, - SAS_TASK_UNDELIVERED, - SAS_DEVICE_UNKNOWN, - isci_perform_normal_io_completion - ); - isci_host_can_dequeue(isci_host, 1); + isci_task_complete_for_upper_layer( + task, + SAS_TASK_UNDELIVERED, + SAM_STAT_TASK_ABORTED, + isci_perform_normal_io_completion + ); - } else { - /* build and send the request. */ - status = isci_request_execute(isci_host, task, &request, - gfp_flags); + /* The I/O was aborted. */ - if (status == SCI_SUCCESS) { - spin_lock_irqsave(&task->task_state_lock, flags); + } else { task->task_state_flags |= SAS_TASK_AT_INITIATOR; spin_unlock_irqrestore(&task->task_state_lock, flags); - } else { - /* Indicate QUEUE_FULL so that the scsi - * midlayer retries. if the request - * failed for remote device reasons, - * it gets returned as - * SAS_TASK_UNDELIVERED next time - * through. - */ - isci_task_complete_for_upper_layer( + + /* build and send the request. */ + status = isci_request_execute(isci_host, task, &request, + gfp_flags); + + if (status != SCI_SUCCESS) { + + spin_lock_irqsave(&task->task_state_lock, flags); + /* Did not really start this command. */ + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Indicate QUEUE_FULL so that the scsi + * midlayer retries. if the request + * failed for remote device reasons, + * it gets returned as + * SAS_TASK_UNDELIVERED next time + * through. + */ + isci_task_complete_for_upper_layer( task, SAS_TASK_COMPLETE, SAS_QUEUE_FULL, isci_perform_normal_io_completion ); - isci_host_can_dequeue(isci_host, 1); + isci_host_can_dequeue(isci_host, 1); + } } } +next_task: task = list_entry(task->list.next, struct sas_task, list); } while (--num > 0); return 0; -- cgit v0.10.2 From cbb65c665b341e560b7a3b37cc616376031b3ee5 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:50 -0800 Subject: isci: Code review change for completion pointer cleanup. Since the request structure contains a pointer to the completion to be used if the request is being aborted or terminated, there is no reason to pass the completion as a pointer to isci_terminate_request_core(). Signed-off-by: Jeff Skirvin Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 3dc9ef3..5e80e84 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -677,10 +677,9 @@ static void isci_request_cleanup_completed_loiterer( static void isci_terminate_request_core( struct isci_host *isci_host, struct isci_remote_device *isci_device, - struct isci_request *isci_request, - struct completion *request_completion) + struct isci_request *isci_request) { - enum sci_status status = SCI_SUCCESS; + enum sci_status status = SCI_SUCCESS; bool was_terminated = false; bool needs_cleanup_handling = false; enum isci_request_status request_status; @@ -720,6 +719,7 @@ static void isci_terminate_request_core( */ if (isci_request->sci_request_handle != NULL) { was_terminated = true; + needs_cleanup_handling = true; status = scic_controller_terminate_request( isci_host->core_controller, to_sci_dev(isci_device), @@ -744,15 +744,15 @@ static void isci_terminate_request_core( dev_dbg(&isci_host->pdev->dev, "%s: before completion wait (%p)\n", __func__, - request_completion); + isci_request->io_request_completion); /* Wait here for the request to complete. */ - wait_for_completion(request_completion); + wait_for_completion(isci_request->io_request_completion); dev_dbg(&isci_host->pdev->dev, "%s: after completion wait (%p)\n", __func__, - request_completion); + isci_request->io_request_completion); } if (needs_cleanup_handling) @@ -760,7 +760,10 @@ static void isci_terminate_request_core( isci_host, isci_device, isci_request ); } + /* Clear the completion pointer from the request. */ + isci_request->io_request_completion = NULL; } + static void isci_terminate_request( struct isci_host *isci_host, struct isci_remote_device *isci_device, @@ -800,7 +803,7 @@ static void isci_terminate_request( * request and potentially calling up to libsas. */ isci_terminate_request_core(isci_host, isci_device, - isci_request, &request_completion); + isci_request); } } @@ -1268,8 +1271,7 @@ int isci_task_abort_task(struct sas_task *task) /* Clean up the request on our side, and wait for the aborted I/O to * complete. */ - isci_terminate_request_core(isci_host, isci_device, old_request, - &aborted_io_completion); + isci_terminate_request_core(isci_host, isci_device, old_request); } /* Make sure we do not leave a reference to aborted_io_completion */ -- cgit v0.10.2 From 4dc043c41037fc6e369270daaa626465a8766565 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:52 -0800 Subject: isci: Termination handling cleanup, added termination timeouts. Added a request "dead" state for use when a termination wait times-out. isci_terminate_pending_requests now detaches the device's pending list and terminates each entry on the detached list. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 166295e..b45c0f1 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -71,7 +71,8 @@ enum isci_request_status { completed = 0x03, aborting = 0x04, aborted = 0x05, - terminating = 0x06 + terminating = 0x06, + dead = 0x07 }; enum task_type { diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 5e80e84..c781a4a 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -663,6 +663,59 @@ static void isci_request_cleanup_completed_loiterer( } isci_request_free(isci_host, isci_request); } + +/** +* @isci_termination_timed_out(): this function will deal with a request for +* which the wait for termination has timed-out. +* +* @isci_host This SCU. +* @isci_request The I/O request being terminated. +*/ +static void +isci_termination_timed_out( + struct isci_host * host, + struct isci_request * request + ) +{ + unsigned long state_flags; + + dev_warn(&host->pdev->dev, + "%s: host = %p; request = %p\n", + __func__, host, request); + + /* At this point, the request to terminate + * has timed out. The best we can do is to + * have the request die a silent death + * if it ever completes. + */ + spin_lock_irqsave(&request->state_lock, state_flags); + + if (request->status == started) { + + /* Set the request state to "dead", + * and clear the task pointer so that an actual + * completion event callback doesn't do + * anything. + */ + request->status = dead; + + /* Clear the timeout completion event pointer.*/ + request->io_request_completion = NULL; + + if (request->ttype == io_task) { + + /* Break links with the sas_task. */ + if (request->ttype_ptr.io_task_ptr != NULL) { + + request->ttype_ptr.io_task_ptr->lldd_task = NULL; + request->ttype_ptr.io_task_ptr = NULL; + } + } + } + spin_unlock_irqrestore(&request->state_lock, state_flags); +} + + /** * isci_terminate_request_core() - This function will terminate the given * request, and wait for it to complete. This function must only be called @@ -684,35 +737,20 @@ static void isci_terminate_request_core( bool needs_cleanup_handling = false; enum isci_request_status request_status; unsigned long flags; + unsigned long timeout_remaining; + dev_dbg(&isci_host->pdev->dev, "%s: device = %p; request = %p\n", __func__, isci_device, isci_request); - /* Peek at the current status of the request. This will tell - * us if there was special handling on the request such that it - * needs to be detached and freed here. - */ - spin_lock_irqsave(&isci_request->state_lock, flags); - request_status = isci_request_get_state(isci_request); - - if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ - && ((request_status == aborted) - || (request_status == aborting) - || (request_status == terminating) - || (request_status == completed) - ) - ) { + spin_lock_irqsave(&isci_host->scic_lock, flags); - /* The completion routine won't free a request in - * the aborted/aborting/terminating state, so we do - * it here. - */ - needs_cleanup_handling = true; - } - spin_unlock_irqrestore(&isci_request->state_lock, flags); + /* Note that we are not going to control + * the target to abort the request. + */ + isci_request->complete_in_target = true; - spin_lock_irqsave(&isci_host->scic_lock, flags); /* Make sure the request wasn't just sitting around signalling * device condition (if the request handle is NULL, then the * request completed but needed additional handling here). @@ -733,13 +771,16 @@ static void isci_terminate_request_core( * fail is when the io request is completed and * being aborted. */ - if (status != SCI_SUCCESS) + if (status != SCI_SUCCESS) { dev_err(&isci_host->pdev->dev, "%s: scic_controller_terminate_request" " returned = 0x%x\n", __func__, status); - else { + /* Clear the completion pointer from the request. */ + isci_request->io_request_completion = NULL; + + } else { if (was_terminated) { dev_dbg(&isci_host->pdev->dev, "%s: before completion wait (%p)\n", @@ -747,21 +788,62 @@ static void isci_terminate_request_core( isci_request->io_request_completion); /* Wait here for the request to complete. */ - wait_for_completion(isci_request->io_request_completion); + #define TERMINATION_TIMEOUT_MSEC 50 + timeout_remaining + = wait_for_completion_timeout( + isci_request->io_request_completion, + msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC)); + + if (!timeout_remaining) { + + isci_termination_timed_out(isci_host, + isci_request); + + dev_err(&isci_host->pdev->dev, + "%s: *** Timeout waiting for " + "termination(%p/%p)\n", + __func__, + isci_request->io_request_completion, + isci_request); + + } else + dev_dbg(&isci_host->pdev->dev, + "%s: after completion wait (%p)\n", + __func__, + isci_request->io_request_completion); + } + /* Clear the completion pointer from the request. */ + isci_request->io_request_completion = NULL; - dev_dbg(&isci_host->pdev->dev, - "%s: after completion wait (%p)\n", - __func__, - isci_request->io_request_completion); + /* Peek at the status of the request. This will tell + * us if there was special handling on the request such that it + * needs to be detached and freed here. + */ + spin_lock_irqsave(&isci_request->state_lock, flags); + request_status = isci_request_get_state(isci_request); + + if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ + && ((request_status == aborted) + || (request_status == aborting) + || (request_status == terminating) + || (request_status == completed) + || (request_status == dead) + ) + ) { + + /* The completion routine won't free a request in + * the aborted/aborting/etc. states, so we do + * it here. + */ + needs_cleanup_handling = true; } + spin_unlock_irqrestore(&isci_request->state_lock, flags); if (needs_cleanup_handling) isci_request_cleanup_completed_loiterer( isci_host, isci_device, isci_request ); } - /* Clear the completion pointer from the request. */ - isci_request->io_request_completion = NULL; } static void isci_terminate_request( @@ -771,11 +853,7 @@ static void isci_terminate_request( enum isci_request_status new_request_state) { enum isci_request_status old_state; - DECLARE_COMPLETION_ONSTACK(request_completion); - unsigned long flags; - - spin_lock_irqsave(&isci_host->scic_lock, flags); /* Change state to "new_request_state" if it is currently "started" */ old_state = isci_request_change_started_to_newstate( @@ -823,73 +901,44 @@ void isci_terminate_pending_requests( struct isci_remote_device *isci_device, enum isci_request_status new_request_state) { - struct isci_request *isci_request; - struct sas_task *task; - bool done = false; - unsigned long flags; + struct isci_request *request; + struct isci_request *next_request; + unsigned long flags; + struct list_head aborted_request_list; + + INIT_LIST_HEAD(&aborted_request_list); dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p (new request state = %d)\n", __func__, isci_device, new_request_state); - #define ISCI_TERMINATE_SHOW_PENDING_REQUESTS - #ifdef ISCI_TERMINATE_SHOW_PENDING_REQUESTS - { - struct isci_request *request; - - /* Only abort the task if it's in the - * device's request_in_process list - */ - list_for_each_entry(request, - &isci_device->reqs_in_process, - dev_node) - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p; request is on " - "reqs_in_process list: %p\n", - __func__, isci_device, request); - } - #endif /* ISCI_TERMINATE_SHOW_PENDING_REQUESTS */ - - /* Clean up all pending requests. */ - do { - spin_lock_irqsave(&isci_host->scic_lock, flags); - - if (list_empty(&isci_device->reqs_in_process)) { - - done = true; - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_lock_irqsave(&isci_host->scic_lock, flags); - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p; done.\n", - __func__, isci_device); - } else { - /* The list was not empty - grab the first request. */ - isci_request = list_first_entry( - &isci_device->reqs_in_process, - struct isci_request, dev_node - ); - /* Note that we are not expecting to have to control - * the target to abort the request. - */ - isci_request->complete_in_target = true; + /* Move all of the pending requests off of the device list. */ + list_splice_init(&isci_device->reqs_in_process, + &aborted_request_list); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); - /* Get the libsas task reference. */ - task = isci_request_access_task(isci_request); + /* Iterate through the now-local list. */ + list_for_each_entry_safe(request, next_request, + &aborted_request_list, dev_node) { - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device=%p request=%p; task=%p\n", - __func__, isci_device, isci_request, task); + dev_warn(&isci_host->pdev->dev, + "%s: isci_device=%p request=%p; task=%p\n", + __func__, + isci_device, request, + ((request->ttype == io_task) + ? isci_request_access_task(request) + : NULL)); - /* Mark all still pending I/O with the selected next - * state. - */ - isci_terminate_request(isci_host, isci_device, - isci_request, new_request_state - ); - } - } while (!done); + /* Mark all still pending I/O with the selected next + * state, terminate and free it. + */ + isci_terminate_request(isci_host, isci_device, + request, new_request_state + ); + } } /** -- cgit v0.10.2 From c3f42feb0c3d20dc7007336e7de949408b93afef Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:56 -0800 Subject: isci: Fix TMF build for SAS/SATA LUN reset cases. In the case where a SAS or SATA LUN reset TMF is built a NULL pointer dereference occurred because of the (unused) callback data pointer. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams Signed-off-by: Jacek Danecki diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c781a4a..c2d74c3 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -545,7 +545,7 @@ void isci_task_build_tmf( void (*tmf_sent_cb)(enum isci_tmf_cb_state, struct isci_tmf *, void *), - struct isci_request *old_request) + void *cb_data) { dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, "%s: isci_device = %p\n", __func__, isci_device); @@ -556,9 +556,21 @@ void isci_task_build_tmf( tmf->tmf_code = code; tmf->timeout_timer = NULL; tmf->cb_state_func = tmf_sent_cb; - tmf->cb_data = old_request; - tmf->io_tag = old_request->io_tag; + tmf->cb_data = cb_data; +} +void isci_task_build_abort_task_tmf( + struct isci_tmf *tmf, + struct isci_remote_device *isci_device, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + struct isci_request *old_request) +{ + isci_task_build_tmf(tmf, isci_device, code, tmf_sent_cb, + (void *)old_request); + tmf->io_tag = old_request->io_tag; } static struct isci_request *isci_task_get_request_from_task( @@ -1300,8 +1312,10 @@ int isci_task_abort_task(struct sas_task *task) */ } else { /* Fill in the tmf stucture */ - isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_task_abort, - isci_abort_task_process_cb, old_request); + isci_task_build_abort_task_tmf(&tmf, isci_device, + isci_tmf_ssp_task_abort, + isci_abort_task_process_cb, + old_request); spin_unlock_irqrestore(&isci_host->scic_lock, flags); diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 5a5a4ec..4c2a27e 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -221,6 +221,15 @@ void isci_task_build_tmf( struct isci_tmf *tmf, struct isci_remote_device *isci_device, enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + void *cb_data); + +void isci_task_build_abort_task_tmf( + struct isci_tmf *tmf, + struct isci_remote_device *isci_device, + enum isci_tmf_function_codes code, void (*tmf_sent_cb)( enum isci_tmf_cb_state, struct isci_tmf *, void *), -- cgit v0.10.2 From 70957a94d70cb82459bd3aea171c54d0a5cd6dbb Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 4 Mar 2011 14:06:58 -0800 Subject: isci: Fixed BUG_ON in isci_abort_task_process_cb callback. The request may be in the "aborted" or the "completed" state when performing a task management operation on it. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c2d74c3..a1234e4 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1116,7 +1116,8 @@ static void isci_abort_task_process_cb( * request state was already set to "aborted" by the abort * task function. */ - BUG_ON(old_request->status != aborted); + BUG_ON((old_request->status != aborted) + && (old_request->status != completed)); break; case isci_tmf_timed_out: -- cgit v0.10.2 From 50e7f9b5a9ae4a763b2c27500807cf237faca9b0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 9 Mar 2011 21:27:46 -0800 Subject: isci: Errors in the submit path for SATA devices manage the ap lock. Since libsas takes the domain device sata_dev.ap->lock before submitting a task, error completions in the submit path for SATA devices must unlock/relock when completing the sas_task back to libsas. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index a1234e4..d00b4c9 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -54,6 +54,8 @@ */ #include +#include +#include #include "scic_task_request.h" #include "scic_remote_device.h" #include "scic_io_request.h" @@ -64,6 +66,91 @@ #include "sata.h" #include "task.h" +/** +* isci_task_complete_for_upper_layer() - This function completes the request +* to the upper layer driver in the case where an I/O needs to be completed +* back in the submit path. +* @host: This parameter is a pointer to the host on which the the request +* should be queued (either as an error or success). +* @task: This parameter is the completed request. +* @response: This parameter is the response code for the completed task. +* @status: This parameter is the status code for the completed task. +* +* none. +*/ +static void isci_task_complete_for_upper_layer(struct sas_task *task, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + unsigned long flags = 0; + struct Scsi_Host *host = NULL; + + task_notification_selection + = isci_task_set_completion_status(task, response, status, + task_notification_selection); + + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (task_notification_selection) { + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + dev_dbg(task->dev->port->ha->dev, + "%s: Normal - task = %p, response=%d, status=%d\n", + __func__, task, response, status); + + if (dev_is_sata(task->dev)) { + /* Since we are still in the submit path, and since + * libsas takes the host lock on behalf of SATA + * devices before I/O starts, we need to unlock + * before we can call back and report the I/O + * submission error. + */ + if (task->dev + && task->dev->port + && task->dev->port->ha) { + + host = task->dev->port->ha->core.shost; + raw_local_irq_save(flags); + spin_unlock(host->host_lock); + } + task->task_done(task); + if (host) { + spin_lock(host->host_lock); + raw_local_irq_restore(flags); + } + } else + task->task_done(task); + + task->lldd_task = NULL; + break; + + case isci_perform_aborted_io_completion: + /* No notification because this request is already in the + * abort path. + */ + dev_warn(task->dev->port->ha->dev, + "%s: Aborted - task = %p, response=%d, status=%d\n", + __func__, task, response, status); + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_warn(task->dev->port->ha->dev, + "%s: Error - task = %p, response=%d, status=%d\n", + __func__, task, response, status); + sas_task_abort(task); + break; + + default: + dev_warn(task->dev->port->ha->dev, + "%s: isci task notification default case!", + __func__); + sas_task_abort(task); + break; + } +} /** * isci_task_execute_task() - This function is one of the SAS Domain Template diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 4c2a27e..e1c9c8f 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -341,64 +341,5 @@ isci_task_set_completion_status( return task_notification_selection; } -/** - * isci_task_complete_for_upper_layer() - This function completes the request - * to the upper layer driver. - * @host: This parameter is a pointer to the host on which the the request - * should be queued (either as an error or success). - * @request: This parameter is the completed request. - * @response: This parameter is the response code for the completed task. - * @status: This parameter is the status code for the completed task. - * - * none. - */ -static inline void isci_task_complete_for_upper_layer( - struct sas_task *task, - enum service_response response, - enum exec_status status, - enum isci_completion_selection task_notification_selection) -{ - task_notification_selection - = isci_task_set_completion_status(task, response, status, - task_notification_selection); - - /* Tasks aborted specifically by a call to the lldd_abort_task - * function should not be completed to the host in the regular path. - */ - switch (task_notification_selection) { - case isci_perform_normal_io_completion: - /* Normal notification (task_done) */ - dev_dbg(task->dev->port->ha->dev, - "%s: Normal - task = %p, response=%d, status=%d\n", - __func__, task, response, status); - task->task_done(task); - task->lldd_task = NULL; - break; - - case isci_perform_aborted_io_completion: - /* No notification because this request is already in the - * abort path. - */ - dev_warn(task->dev->port->ha->dev, - "%s: Aborted - task = %p, response=%d, status=%d\n", - __func__, task, response, status); - break; - - case isci_perform_error_io_completion: - /* Use sas_task_abort */ - dev_warn(task->dev->port->ha->dev, - "%s: Error - task = %p, response=%d, status=%d\n", - __func__, task, response, status); - sas_task_abort(task); - break; - - default: - dev_warn(task->dev->port->ha->dev, - "%s: isci task notification default case!", - __func__); - sas_task_abort(task); - break; - } -} #endif /* !defined(_SCI_TASK_H_) */ -- cgit v0.10.2 From aa14510295d3d87431c915c0b2bc5dd3af7f2c35 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Mon, 7 Mar 2011 16:40:47 -0700 Subject: isci: Always set response/status for requests going into the error path. In the case of I/O requests being failed because of a required device reset condition, set the response and status to indicate an I/O failure. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index f19a952..0156431 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -809,11 +809,11 @@ static void isci_task_save_for_upper_layer_completion( /* Normal notification (task_done) */ dev_dbg(&host->pdev->dev, - "%s: Normal - task = %p, response=%d, status=%d\n", + "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n", __func__, task, - response, - status); + task->task_status.resp, response, + task->task_status.stat, status); /* Add to the completed list. */ list_add(&request->completed_node, &host->requests_to_complete); @@ -827,11 +827,11 @@ static void isci_task_save_for_upper_layer_completion( * already in the abort path. */ dev_warn(&host->pdev->dev, - "%s: Aborted - task = %p, response=%d, status=%d\n", + "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n", __func__, task, - response, - status); + task->task_status.resp, response, + task->task_status.stat, status); /* Wake up whatever process was waiting for this * request to complete. @@ -850,11 +850,11 @@ static void isci_task_save_for_upper_layer_completion( case isci_perform_error_io_completion: /* Use sas_task_abort */ dev_warn(&host->pdev->dev, - "%s: Error - task = %p, response=%d, status=%d\n", + "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n", __func__, task, - response, - status); + task->task_status.resp, response, + task->task_status.stat, status); /* Add to the aborted list. */ list_add(&request->completed_node, &host->requests_to_errorback); @@ -862,11 +862,11 @@ static void isci_task_save_for_upper_layer_completion( default: dev_warn(&host->pdev->dev, - "%s: Unknown - task = %p, response=%d, status=%d\n", + "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n", __func__, task, - response, - status); + task->task_status.resp, response, + task->task_status.stat, status); /* Add to the error to libsas list. */ list_add(&request->completed_node, @@ -1165,6 +1165,10 @@ void isci_request_io_request_complete( task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; spin_unlock_irqrestore(&task->task_state_lock, task_flags); + /* Fail the I/O. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; + complete_to_host = isci_perform_error_io_completion; request->complete_in_target = false; break; diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index e1c9c8f..b84bedd 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -302,14 +302,19 @@ isci_task_set_completion_status( spin_lock_irqsave(&task->task_state_lock, flags); - task->task_status.resp = response; - task->task_status.stat = status; - /* If a device reset is being indicated, make sure the I/O * is in the error path. */ - if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) { + + /* Fail the I/O to make sure it goes into the error path. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; + task_notification_selection = isci_perform_error_io_completion; + } + task->task_status.resp = response; + task->task_status.stat = status; switch (task_notification_selection) { -- cgit v0.10.2 From 6e2802a7fc246b53f919efbf1c011da2d0a4ff30 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Tue, 8 Mar 2011 20:32:16 -0700 Subject: isci: All pending requests are terminated before stopping the device. Make sure all pending I/O including any in the libsas error handler process is cleaned-up. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 1dae218..6fe6815 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -380,6 +380,10 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem "%s: isci_device = %p\n", __func__, idev); isci_remote_device_change_state(idev, isci_stopping); + + /* Kill all outstanding requests. */ + isci_remote_device_nuke_requests(idev); + set_bit(IDEV_STOP_PENDING, &idev->flags); spin_lock_irqsave(&ihost->scic_lock, flags); -- cgit v0.10.2 From 34cad85d18d6da1cc11e410046d7572e65b19fcf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 10 Mar 2011 00:01:43 -0800 Subject: isci: add "isci_id" attribute Allow each controller to be identified via sysfs. # cat /sys/class/scsi_host/host13/isci_id 1 Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 2838bef..3f2bb13 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -229,12 +229,28 @@ static int isci_register_sas_ha(struct isci_host *isci_host) return 0; } -static void isci_unregister_sas_ha(struct isci_host *isci_host) +static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) { + struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); + + return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); +} + +static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); + +static void isci_unregister(struct isci_host *isci_host) +{ + struct Scsi_Host *shost; + if (!isci_host) return; - sas_unregister_ha(&(isci_host->sas_ha)); + shost = isci_host->shost; + device_remove_file(&shost->shost_dev, &dev_attr_isci_id); + + sas_unregister_ha(&isci_host->sas_ha); sas_remove_host(isci_host->shost); scsi_remove_host(isci_host->shost); @@ -477,8 +493,14 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) if (err) goto err_shost_remove; + err = device_create_file(&shost->shost_dev, &dev_attr_isci_id); + if (err) + goto err_unregister_ha; + return isci_host; + err_unregister_ha: + sas_unregister_ha(&(isci_host->sas_ha)); err_shost_remove: scsi_remove_host(shost); err_shost: @@ -640,7 +662,7 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic err_host_alloc: for_each_isci_host(i, isci_host, pdev) - isci_unregister_sas_ha(isci_host); + isci_unregister(isci_host); return err; } @@ -650,7 +672,7 @@ static void __devexit isci_pci_remove(struct pci_dev *pdev) int i; for_each_isci_host(i, isci_host, pdev) { - isci_unregister_sas_ha(isci_host); + isci_unregister(isci_host); isci_host_deinit(isci_host); scic_controller_disable_interrupts(isci_host->core_controller); } -- cgit v0.10.2 From 1077a574103177bff22b7cdd155d960f46ac1e8f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 11 Mar 2011 10:13:51 -0800 Subject: isci: fix incorrect assumptions about task->dev and task->dev->port being NULL A domain_device has the same lifetime as its related scsi_target. The scsi_target is reference counted based on outstanding commands, therefore it is safe to assume that if we have a valid sas_task that the ->dev pointer is also valid. The asd_sas_port of a domain_device has the same lifetime as the driver so it can also never be NULL as long as the sas_task is valid and the driver is loaded. This also cleans up isci_task_complete_for_upper_layer(), renames it to isci_task_refuse() and notices that the isci_completion_selection parameter was set to isci_perform_normal_io_completion by all callers. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index d00b4c9..d483680 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -67,39 +67,36 @@ #include "task.h" /** -* isci_task_complete_for_upper_layer() - This function completes the request -* to the upper layer driver in the case where an I/O needs to be completed -* back in the submit path. -* @host: This parameter is a pointer to the host on which the the request -* should be queued (either as an error or success). -* @task: This parameter is the completed request. -* @response: This parameter is the response code for the completed task. -* @status: This parameter is the status code for the completed task. +* isci_task_refuse() - complete the request to the upper layer driver in +* the case where an I/O needs to be completed back in the submit path. +* @ihost: host on which the the request was queued +* @task: request to complete +* @response: response code for the completed task. +* @status: status code for the completed task. * -* none. */ -static void isci_task_complete_for_upper_layer(struct sas_task *task, - enum service_response response, - enum exec_status status, - enum isci_completion_selection task_notification_selection) +static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, + enum service_response response, + enum exec_status status) + { - unsigned long flags = 0; - struct Scsi_Host *host = NULL; + enum isci_completion_selection disposition; - task_notification_selection - = isci_task_set_completion_status(task, response, status, - task_notification_selection); + disposition = isci_perform_normal_io_completion; + disposition = isci_task_set_completion_status(task, response, status, + disposition); /* Tasks aborted specifically by a call to the lldd_abort_task - * function should not be completed to the host in the regular path. - */ - switch (task_notification_selection) { + * function should not be completed to the host in the regular path. + */ + switch (disposition) { case isci_perform_normal_io_completion: /* Normal notification (task_done) */ - dev_dbg(task->dev->port->ha->dev, + dev_dbg(&ihost->pdev->dev, "%s: Normal - task = %p, response=%d, status=%d\n", __func__, task, response, status); + task->lldd_task = NULL; if (dev_is_sata(task->dev)) { /* Since we are still in the submit path, and since * libsas takes the host lock on behalf of SATA @@ -107,44 +104,36 @@ static void isci_task_complete_for_upper_layer(struct sas_task *task, * before we can call back and report the I/O * submission error. */ - if (task->dev - && task->dev->port - && task->dev->port->ha) { + unsigned long flags; - host = task->dev->port->ha->core.shost; - raw_local_irq_save(flags); - spin_unlock(host->host_lock); - } + raw_local_irq_save(flags); + spin_unlock(ihost->shost->host_lock); task->task_done(task); - if (host) { - spin_lock(host->host_lock); - raw_local_irq_restore(flags); - } + spin_lock(ihost->shost->host_lock); + raw_local_irq_restore(flags); } else task->task_done(task); - - task->lldd_task = NULL; break; case isci_perform_aborted_io_completion: /* No notification because this request is already in the * abort path. */ - dev_warn(task->dev->port->ha->dev, + dev_warn(&ihost->pdev->dev, "%s: Aborted - task = %p, response=%d, status=%d\n", __func__, task, response, status); break; case isci_perform_error_io_completion: /* Use sas_task_abort */ - dev_warn(task->dev->port->ha->dev, + dev_warn(&ihost->pdev->dev, "%s: Error - task = %p, response=%d, status=%d\n", __func__, task, response, status); sas_task_abort(task); break; default: - dev_warn(task->dev->port->ha->dev, + dev_warn(&ihost->pdev->dev, "%s: isci task notification default case!", __func__); sas_task_abort(task); @@ -152,6 +141,10 @@ static void isci_task_complete_for_upper_layer(struct sas_task *task, } } +#define for_each_sas_task(num, task) \ + for (; num > 0; num--,\ + task = list_entry(task->list.next, struct sas_task, list)) + /** * isci_task_execute_task() - This function is one of the SAS Domain Template * functions. This function is called by libsas to send a task down to @@ -164,7 +157,7 @@ static void isci_task_complete_for_upper_layer(struct sas_task *task, */ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) { - struct isci_host *isci_host; + struct isci_host *ihost = task->dev->port->ha->lldd_ha; struct isci_request *request = NULL; struct isci_remote_device *device; unsigned long flags; @@ -172,60 +165,23 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) enum sci_status status; enum isci_status device_status; - dev_dbg(task->dev->port->ha->dev, "%s: num=%d\n", __func__, num); - - if ((task->dev == NULL) || (task->dev->port == NULL)) { - - /* Indicate SAS_TASK_UNDELIVERED, so that the scsi midlayer - * removes the target. - */ - isci_task_complete_for_upper_layer( - task, - SAS_TASK_UNDELIVERED, - SAS_DEVICE_UNKNOWN, - isci_perform_normal_io_completion - ); - return 0; /* The I/O was accepted (and failed). */ - } - isci_host = isci_host_from_sas_ha(task->dev->port->ha); + dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num); /* Check if we have room for more tasks */ - ret = isci_host_can_queue(isci_host, num); + ret = isci_host_can_queue(ihost, num); if (ret) { - dev_warn(task->dev->port->ha->dev, "%s: queue full\n", __func__); + dev_warn(&ihost->pdev->dev, "%s: queue full\n", __func__); return ret; } - do { - dev_dbg(task->dev->port->ha->dev, + for_each_sas_task(num, task) { + dev_dbg(&ihost->pdev->dev, "task = %p, num = %d; dev = %p; cmd = %p\n", task, num, task->dev, task->uldd_task); - if ((task->dev == NULL) || (task->dev->port == NULL)) { - dev_warn(task->dev->port->ha->dev, - "%s: task %p's port or dev == NULL!\n", - __func__, task); - - /* Indicate SAS_TASK_UNDELIVERED, so that the scsi - * midlayer removes the target. - */ - isci_task_complete_for_upper_layer( - task, - SAS_TASK_UNDELIVERED, - SAS_DEVICE_UNKNOWN, - isci_perform_normal_io_completion - ); - /* We don't have a valid host reference, so we - * can't control the host queueing condition. - */ - goto next_task; - } - device = isci_dev_from_domain_dev(task->dev); - isci_host = isci_host_from_sas_ha(task->dev->port->ha); - if (device) device_status = device->status; else @@ -239,34 +195,28 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) if (device_status != isci_ready_for_io) { /* Forces a retry from scsi mid layer. */ - dev_warn(task->dev->port->ha->dev, + dev_warn(&ihost->pdev->dev, "%s: task %p: isci_host->status = %d, " "device = %p; device_status = 0x%x\n\n", __func__, task, - isci_host_get_state(isci_host), + isci_host_get_state(ihost), device, device_status); if (device_status == isci_ready) { /* Indicate QUEUE_FULL so that the scsi midlayer * retries. */ - isci_task_complete_for_upper_layer( - task, - SAS_TASK_COMPLETE, - SAS_QUEUE_FULL, - isci_perform_normal_io_completion - ); + isci_task_refuse(ihost, task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); } else { /* Else, the device is going down. */ - isci_task_complete_for_upper_layer( - task, - SAS_TASK_UNDELIVERED, - SAS_DEVICE_UNKNOWN, - isci_perform_normal_io_completion - ); + isci_task_refuse(ihost, task, + SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN); } - isci_host_can_dequeue(isci_host, 1); + isci_host_can_dequeue(ihost, 1); } else { /* There is a device and it's ready for I/O. */ spin_lock_irqsave(&task->task_state_lock, flags); @@ -276,12 +226,9 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) spin_unlock_irqrestore(&task->task_state_lock, flags); - isci_task_complete_for_upper_layer( - task, - SAS_TASK_UNDELIVERED, - SAM_STAT_TASK_ABORTED, - isci_perform_normal_io_completion - ); + isci_task_refuse(ihost, task, + SAS_TASK_UNDELIVERED, + SAM_STAT_TASK_ABORTED); /* The I/O was aborted. */ @@ -290,7 +237,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) spin_unlock_irqrestore(&task->task_state_lock, flags); /* build and send the request. */ - status = isci_request_execute(isci_host, task, &request, + status = isci_request_execute(ihost, task, &request, gfp_flags); if (status != SCI_SUCCESS) { @@ -307,19 +254,14 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) * SAS_TASK_UNDELIVERED next time * through. */ - isci_task_complete_for_upper_layer( - task, - SAS_TASK_COMPLETE, - SAS_QUEUE_FULL, - isci_perform_normal_io_completion - ); - isci_host_can_dequeue(isci_host, 1); + isci_task_refuse(ihost, task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); + isci_host_can_dequeue(ihost, 1); } } } -next_task: - task = list_entry(task->list.next, struct sas_task, list); - } while (--num > 0); + } return 0; } -- cgit v0.10.2 From c4b9e24c4be67aeed44cd46ef5ea92948d02a426 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Wed, 16 Mar 2011 09:41:59 -0700 Subject: isci: don't hold scic_lock over calls to sas_task_abort() In the case where submitted I/Os fail with the status code SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, the execute function now waits until scic_lock is cleared before calling the helper function "isci_request_signal_device_reset" which sets the flag for the pending reset condition on the I/O. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 0156431..eba8e0b 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -449,26 +449,11 @@ int isci_request_execute( list_add(&request->dev_node, &isci_device->reqs_in_process); - if (status == - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - /* Signal libsas that we need the SCSI error - * handler thread to work on this I/O and that - * we want a device reset. - */ - isci_request_signal_device_reset(request); - - /* Change the status, since we are holding - * the I/O until it is managed by the SCSI - * error handler. - */ - status = SCI_SUCCESS; - } - else + if (status == SCI_SUCCESS) { /* Save the tag for possible task mgmt later. */ request->io_tag = scic_io_request_get_io_tag( request->sci_request_handle); - - + } } else dev_warn(&isci_host->pdev->dev, "%s: failed request start\n", @@ -476,6 +461,21 @@ int isci_request_execute( spin_unlock_irqrestore(&isci_host->scic_lock, flags); + if (status == + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* Signal libsas that we need the SCSI error + * handler thread to work on this I/O and that + * we want a device reset. + */ + isci_request_signal_device_reset(request); + + /* Change the status, since we are holding + * the I/O until it is managed by the SCSI + * error handler. + */ + status = SCI_SUCCESS; + } + } else dev_warn(&isci_host->pdev->dev, "%s: request_construct failed - status = 0x%x\n", -- cgit v0.10.2 From ce0b89f35636f3a69fbde851aff8a284c4b4c22b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Mar 2011 08:04:43 -0700 Subject: isci: task.h compile and checkpatch fixes A usage of "FALSE" leaked in as well as some checkpatch escapes. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index b84bedd..9754b43 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -306,7 +306,6 @@ isci_task_set_completion_status( * is in the error path. */ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) { - /* Fail the I/O to make sure it goes into the error path. */ response = SAS_TASK_UNDELIVERED; status = SAM_STAT_TASK_ABORTED; @@ -317,28 +316,25 @@ isci_task_set_completion_status( task->task_status.stat = status; switch (task_notification_selection) { - - case isci_perform_aborted_io_completion: - /* This path can occur with task-managed requests as well as - * requests terminated because of LUN or device resets. - */ - /* Fall through to the normal case... */ - - case isci_perform_normal_io_completion: - /* Normal notification (task_done) */ - isci_set_task_doneflags(task); - break; - - default: - WARN_ON(FALSE); - /* Fall through to the error case... */ - - case isci_perform_error_io_completion: - /* Use sas_task_abort */ - /* Leave SAS_TASK_STATE_DONE clear - * Leave SAS_TASK_AT_INITIATOR set. - */ - break; + case isci_perform_aborted_io_completion: + /* This path can occur with task-managed requests as well as + * requests terminated because of LUN or device resets. + */ + /* Fall through to the normal case... */ + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + isci_set_task_doneflags(task); + break; + default: + WARN_ONCE(1, "unknown task_notification_selection: %d\n", + task_notification_selection); + /* Fall through to the error case... */ + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + /* Leave SAS_TASK_STATE_DONE clear + * Leave SAS_TASK_AT_INITIATOR set. + */ + break; } spin_unlock_irqrestore(&task->task_state_lock, flags); -- cgit v0.10.2 From 9affa289e2f9ef4721e85edbde86466524bfe957 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Mar 2011 17:31:27 -0700 Subject: isci: reset hardware at init Don't assume the hardware is in a known state at init. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 180bb1e..799a04b 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -2116,7 +2116,7 @@ enum sci_status scic_controller_construct(struct scic_sds_controller *controller /* Initialize the User and OEM parameters to default values. */ scic_sds_controller_set_default_config_parameters(controller); - return SCI_SUCCESS; + return scic_controller_reset(controller); } /* --------------------------------------------------------------------------- */ @@ -3562,6 +3562,7 @@ const struct scic_sds_controller_state_handler scic_sds_controller_state_handler .terminate_request = scic_sds_controller_default_request_handler, }, [SCI_BASE_CONTROLLER_STATE_RESET] = { + .base.reset = scic_sds_controller_general_reset_handler, .base.initialize = scic_sds_controller_reset_state_initialize_handler, .base.start_io = scic_sds_controller_default_start_operation_handler, .base.complete_io = scic_sds_controller_default_request_handler, -- cgit v0.10.2 From d044af17aacd03a1f4fced1af4b7570d205c8fd9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Mar 2011 09:52:49 -0800 Subject: isci: Add support for probing OROM for OEM params We need to scan the OROM for signature and grab the OEM parameters. We also need to do the same for EFI. If all fails then we resort to user binary blob, and if that fails then we go to the defaults. Share the format with the create_fw utility so that all possible sources of the parameters are in-sync. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index d402d67..1252d768 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -9,7 +9,7 @@ EXTRA_CFLAGS += -Idrivers/scsi/isci/core/ -Idrivers/scsi/isci/ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ remote_device.o port.o timers.o \ - host.o task.o events.o \ + host.o task.o events.o probe_roms.o \ core/scic_sds_controller.o \ core/scic_sds_remote_device.o \ core/scic_sds_request.o \ diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index 485fefc..5e1345d 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -68,6 +68,7 @@ #include "sci_status.h" #include "intel_sas.h" #include "sci_controller_constants.h" +#include "probe_roms.h" struct scic_sds_controller; @@ -224,44 +225,6 @@ union scic_user_parameters { #define SCIC_SDS_PARM_PHY_MASK_MAX 0xF /** - * struct scic_sds_oem_parameters - This structure delineates the various OEM - * parameters that must be set the core user. - * - * - */ -struct scic_sds_oem_parameters { - struct { - /** - * This field indicates whether Spread Spectrum Clocking (SSC) - * should be enabled or disabled. - */ - bool do_enable_ssc; - - } controller; - - struct { - /** - * This field specifies the phys to be contained inside a port. - * The bit position in the mask specifies the index of the phy - * to be contained in the port. Multiple bits (i.e. phys) - * can be contained in a single port. - */ - u8 phy_mask; - - } ports[SCI_MAX_PORTS]; - - struct sci_phy_oem_params { - /** - * This field specifies the SAS address to be transmitted on - * for this phy index. - */ - struct sci_sas_address sas_address; - - } phys[SCI_MAX_PHYS]; - -}; - -/** * This structure/union specifies the various different OEM parameter sets * available. Each type is specific to a hardware controller version. * @@ -273,7 +236,7 @@ union scic_oem_parameters { * Storage Controller Unit (SCU) Driver Standard (SDS) version * 1. */ - struct scic_sds_oem_parameters sds1; + struct scic_sds_oem_params sds1; }; diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 799a04b..e7f3711 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -2039,10 +2039,8 @@ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_co /* Initialize all of the phy parameter information. */ for (index = 0; index < SCI_MAX_PHYS; index++) { - /* - * Default to 3G (i.e. Gen 2) for now. User can override if - * they choose. */ - scic->user_parameters.sds1.phys[index].max_speed_generation = 2; + /* Default to 6G (i.e. Gen 3) for now. */ + scic->user_parameters.sds1.phys[index].max_speed_generation = 3; /* the frequencies cannot be 0 */ scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c index 442caac..f8f96d6 100644 --- a/drivers/scsi/isci/firmware/create_fw.c +++ b/drivers/scsi/isci/firmware/create_fw.c @@ -6,157 +6,30 @@ #include #include #include +#include +#include +#include -char blob_name[] = "isci_firmware.bin"; -char id[] = "#SCU MAGIC#"; -unsigned char version = 1; -unsigned char sub_version = 0; - - -/* - * For all defined arrays: - * elements 0-3 are for SCU0, ports 0-3 - * elements 4-7 are for SCU1, ports 0-3 - * - * valid configurations for one SCU are: - * P0 P1 P2 P3 - * ---------------- - * 0xF,0x0,0x0,0x0 # 1 x4 port - * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1 - * # ports - * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2 - * # port - * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port - * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration) - * - * if there is a port/phy on which you do not wish to override the default - * values, use the value assigned to UNINIT_PARAM (255). - */ -unsigned int phy_mask[] = { 1, 2, 4, 8, 1, 2, 4, 8 }; - - -/* denotes SAS generation. i.e. 3: SAS Gen 3 6G */ -unsigned int phy_gen[] = { 3, 3, 3, 3, 3, 3, 3, 3 }; - -/* - * if there is a port/phy on which you do not wish to override the default - * values, use the value "0000000000000000". SAS address of zero's is - * considered invalid and will not be used. - */ -unsigned long long sas_addr[] = { 0x5FCFFFFFF0000000ULL, - 0x5FCFFFFFF1000000ULL, - 0x5FCFFFFFF2000000ULL, - 0x5FCFFFFFF3000000ULL, - 0x5FCFFFFFF4000000ULL, - 0x5FCFFFFFF5000000ULL, - 0x5FCFFFFFF6000000ULL, - 0x5FCFFFFFF7000000ULL }; - -int write_blob(void) +#include "create_fw.h" +#include "../probe_roms.h" + +int write_blob(struct isci_orom *isci_orom) { FILE *fd; int err; + size_t count; fd = fopen(blob_name, "w+"); if (!fd) { perror("Open file for write failed"); + fclose(fd); return -EIO; } - /* write id */ - err = fwrite((void *)id, sizeof(char), strlen(id)+1, fd); - if (err == 0) { - perror("write id failed"); - return err; - } - - /* write version */ - err = fwrite((void *)&version, sizeof(version), 1, fd); - if (err == 0) { - perror("write version failed"); - return err; - } - - /* write sub version */ - err = fwrite((void *)&sub_version, sizeof(sub_version), 1, fd); - if (err == 0) { - perror("write subversion failed"); - return err; - } - - /* write phy mask header */ - err = fputc(0x1, fd); - if (err == EOF) { - perror("write phy mask header failed"); - return -EIO; - } - - /* write size */ - err = fputc(8, fd); - if (err == EOF) { - perror("write phy mask size failed"); - return -EIO; - } - - /* write phy masks */ - err = fwrite((void *)phy_mask, 1, sizeof(phy_mask), fd); - if (err == 0) { - perror("write phy_mask failed"); - return err; - } - - /* write phy gen header */ - err = fputc(0x2, fd); - if (err == EOF) { - perror("write phy gen header failed"); - return -EIO; - } - - /* write size */ - err = fputc(8, fd); - if (err == EOF) { - perror("write phy gen size failed"); - return -EIO; - } - - /* write phy_gen */ - err = fwrite((void *)phy_gen, - 1, - sizeof(phy_gen), - fd); - if (err == 0) { - perror("write phy_gen failed"); - return err; - } - - /* write phy gen header */ - err = fputc(0x3, fd); - if (err == EOF) { - perror("write sas addr header failed"); - return -EIO; - } - - /* write size */ - err = fputc(8, fd); - if (err == EOF) { - perror("write sas addr size failed"); - return -EIO; - } - - /* write sas_addr */ - err = fwrite((void *)sas_addr, - 1, - sizeof(sas_addr), - fd); - if (err == 0) { - perror("write sas_addr failed"); - return err; - } - - /* write end header */ - err = fputc(0xff, fd); - if (err == EOF) { - perror("write end header failed"); + count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd); + if (count != 1) { + perror("Write data failed"); + fclose(fd); return -EIO; } @@ -165,13 +38,53 @@ int write_blob(void) return 0; } +void set_binary_values(struct isci_orom *isci_orom) +{ + int ctrl_idx, phy_idx, port_idx; + + /* setting OROM signature */ + strncpy(isci_orom->hdr.signature, sig, strlen(sig)); + isci_orom->hdr.version = 0x10; + isci_orom->hdr.total_block_length = sizeof(struct isci_orom); + isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr); + isci_orom->hdr.num_elements = num_elements; + + for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) { + isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type; + isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up = + max_num_concurrent_dev_spin_up; + isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc = + enable_ssc; + + for (port_idx = 0; port_idx < 4; port_idx++) + isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask = + phy_mask[ctrl_idx][port_idx]; + + for (phy_idx = 0; phy_idx < 4; phy_idx++) { + isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high = + (__u32)(sas_addr[ctrl_idx][phy_idx] >> 32); + isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low = + (__u32)(sas_addr[ctrl_idx][phy_idx]); + } + } +} + int main(void) { int err; + struct isci_orom *isci_orom; + + isci_orom = malloc(sizeof(struct isci_orom)); + memset(isci_orom, 0, sizeof(struct isci_orom)); - err = write_blob(); - if (err < 0) + set_binary_values(isci_orom); + + err = write_blob(isci_orom); + if (err < 0) { + free(isci_orom); return err; + } + free(isci_orom); return 0; } diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h new file mode 100644 index 0000000..bedbe4f --- /dev/null +++ b/drivers/scsi/isci/firmware/create_fw.h @@ -0,0 +1,67 @@ +#ifndef _CREATE_FW_H_ +#define _CREATE_FW_H_ + + +/* we are configuring for 2 SCUs */ +static const int num_elements = 2; + +/* + * For all defined arrays: + * elements 0-3 are for SCU0, ports 0-3 + * elements 4-7 are for SCU1, ports 0-3 + * + * valid configurations for one SCU are: + * P0 P1 P2 P3 + * ---------------- + * 0xF,0x0,0x0,0x0 # 1 x4 port + * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1 + * # ports + * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2 + * # port + * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port + * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration) + * + * if there is a port/phy on which you do not wish to override the default + * values, use the value assigned to UNINIT_PARAM (255). + */ +#ifdef MPC +static const __u8 phy_mask[2][4] = { {1, 2, 4, 8}, + {1, 2, 4, 8} }; +#else /* APC (default) */ +static const __u8 phy_mask[2][4]; +#endif + +/* discovery mode type (port auto config mode by default ) */ +static const int mode_type; + +/* Maximum number of concurrent device spin up */ +static const int max_num_concurrent_dev_spin_up = 1; + +/* enable of ssc operation */ +static const int enable_ssc; + +/* AFE_TX_AMP_CONTROL */ +static const unsigned int afe_tx_amp_control0 = 0x000e7c03; +static const unsigned int afe_tx_amp_control1 = 0x000e7c03; +static const unsigned int afe_tx_amp_control2 = 0x000e7c03; +static const unsigned int afe_tx_amp_control3 = 0x000e7c03; + +/* + * if there is a port/phy on which you do not wish to override the default + * values, use the value "0000000000000000". SAS address of zero's is + * considered invalid and will not be used. + */ +static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000000ULL, + 0x5FCFFFFFF1000000ULL, + 0x5FCFFFFFF2000000ULL, + 0x5FCFFFFFF3000000ULL }, + { 0x5FCFFFFFF4000000ULL, + 0x5FCFFFFFF5000000ULL, + 0x5FCFFFFFF6000000ULL, + 0x5FCFFFFFF7000000ULL } }; + +static const char blob_name[] = "isci_firmware.bin"; +static const char sig[] = "ISCUOEMB"; +static const unsigned char version = 1; + +#endif diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index dc231c2..bb5b54d 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -61,6 +61,7 @@ #include "port.h" #include "request.h" #include "host.h" +#include "probe_roms.h" irqreturn_t isci_msix_isr(int vec, void *data) { @@ -419,6 +420,7 @@ int isci_host_init(struct isci_host *isci_host) struct scic_sds_controller *controller; union scic_oem_parameters scic_oem_params; union scic_user_parameters scic_user_params; + struct isci_pci_info *pci_info = to_pci_info(isci_host->pdev); isci_timer_list_construct(isci_host); @@ -461,31 +463,32 @@ int isci_host_init(struct isci_host *isci_host) sci_object_set_association(isci_host->core_controller, (void *)isci_host); - /* grab initial values stored in the controller object for OEM and USER - * parameters */ - scic_oem_parameters_get(controller, &scic_oem_params); + /* + * grab initial values stored in the controller object for OEM and USER + * parameters + */ scic_user_parameters_get(controller, &scic_user_params); + status = scic_user_parameters_set(isci_host->core_controller, + &scic_user_params); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: scic_user_parameters_set failed\n", + __func__); + return -ENODEV; + } + + scic_oem_parameters_get(controller, &scic_oem_params); - if (isci_firmware) { - /* grab any OEM and USER parameters specified in binary blob */ + /* grab any OEM parameters specified in orom */ + if (pci_info->orom) { status = isci_parse_oem_parameters(&scic_oem_params, - isci_host->id, - isci_firmware); + pci_info->orom, + isci_host->id); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, "parsing firmware oem parameters failed\n"); return -EINVAL; } - - status = isci_parse_user_parameters(&scic_user_params, - isci_host->id, - isci_firmware); - if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "%s: isci_parse_user_parameters" - " failed\n", __func__); - return -EINVAL; - } } else { status = scic_oem_parameters_set(isci_host->core_controller, &scic_oem_params); @@ -495,16 +498,6 @@ int isci_host_init(struct isci_host *isci_host) __func__); return -ENODEV; } - - - status = scic_user_parameters_set(isci_host->core_controller, - &scic_user_params); - if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "%s: scic_user_parameters_set failed\n", - __func__); - return -ENODEV; - } } tasklet_init(&isci_host->completion_tasklet, diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 889a785..d012b69 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -140,8 +140,8 @@ static inline struct isci_remote_device *idev_by_id(struct isci_host *ihost, int struct isci_pci_info { struct msix_entry msix_entries[SCI_MAX_MSIX_INT]; - int core_lib_array_index; struct isci_host *hosts[SCI_MAX_CONTROLLERS]; + struct isci_orom *orom; }; static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 3f2bb13..6551932 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -56,12 +56,15 @@ #include #include #include +#include +#include #include #include "isci.h" #include "task.h" #include "sci_controller_constants.h" #include "scic_remote_device.h" #include "sci_environment.h" +#include "probe_roms.h" static struct scsi_transport_template *isci_transport_template; @@ -373,85 +376,6 @@ static int isci_setup_interrupts(struct pci_dev *pdev) return err; } -/** - * isci_parse_oem_parameters() - This method will take OEM parameters - * from the module init parameters and copy them to oem_params. This will - * only copy values that are not set to the module parameter default values - * @oem_parameters: This parameter specifies the controller default OEM - * parameters. It is expected that this has been initialized to the default - * parameters for the controller - * - * - */ -enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params, - int scu_index, - struct isci_firmware *fw) -{ - int i; - - /* check for valid inputs */ - if (!(scu_index >= 0 - && scu_index < SCI_MAX_CONTROLLERS - && oem_params != NULL)) { - return SCI_FAILURE; - } - - for (i = 0; i < SCI_MAX_PHYS; i++) { - int array_idx = i + (SCI_MAX_PHYS * scu_index); - u64 sas_addr = fw->sas_addrs[array_idx]; - - if (sas_addr != 0) { - oem_params->sds1.phys[i].sas_address.low = - (u32)(sas_addr & 0xffffffff); - oem_params->sds1.phys[i].sas_address.high = - (u32)((sas_addr >> 32) & 0xffffffff); - } - } - - for (i = 0; i < SCI_MAX_PORTS; i++) { - int array_idx = i + (SCI_MAX_PORTS * scu_index); - u32 pmask = fw->phy_masks[array_idx]; - - oem_params->sds1.ports[i].phy_mask = pmask; - } - - return SCI_SUCCESS; -} - -/** - * isci_parse_user_parameters() - This method will take user parameters - * from the module init parameters and copy them to user_params. This will - * only copy values that are not set to the module parameter default values - * @user_parameters: This parameter specifies the controller default user - * parameters. It is expected that this has been initialized to the default - * parameters for the controller - * - * - */ -enum sci_status isci_parse_user_parameters( - union scic_user_parameters *user_params, - int scu_index, - struct isci_firmware *fw) -{ - int i; - - if (!(scu_index >= 0 - && scu_index < SCI_MAX_CONTROLLERS - && user_params != NULL)) { - return SCI_FAILURE; - } - - for (i = 0; i < SCI_MAX_PORTS; i++) { - int array_idx = i + (SCI_MAX_PORTS * scu_index); - u32 gen = fw->phy_gens[array_idx]; - - user_params->sds1.phys[i].max_speed_generation = gen; - - } - - return SCI_SUCCESS; -} - static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) { struct isci_host *isci_host; @@ -535,73 +459,13 @@ static void check_si_rev(struct pci_dev *pdev) } -static int isci_verify_firmware(const struct firmware *fw, - struct isci_firmware *isci_fw) -{ - const u8 *tmp; - - if (fw->size < ISCI_FIRMWARE_MIN_SIZE) - return -EINVAL; - - tmp = fw->data; - - /* 12th char should be the NULL terminate for the ID string */ - if (tmp[11] != '\0') - return -EINVAL; - - if (strncmp("#SCU MAGIC#", tmp, 11) != 0) - return -EINVAL; - - isci_fw->id = tmp; - isci_fw->version = fw->data[ISCI_FW_VER_OFS]; - isci_fw->subversion = fw->data[ISCI_FW_SUBVER_OFS]; - - tmp = fw->data + ISCI_FW_DATA_OFS; - - while (*tmp != ISCI_FW_HDR_EOF) { - switch (*tmp) { - case ISCI_FW_HDR_PHYMASK: - tmp++; - isci_fw->phy_masks_size = *tmp; - tmp++; - isci_fw->phy_masks = (const u32 *)tmp; - tmp += sizeof(u32) * isci_fw->phy_masks_size; - break; - - case ISCI_FW_HDR_PHYGEN: - tmp++; - isci_fw->phy_gens_size = *tmp; - tmp++; - isci_fw->phy_gens = (const u32 *)tmp; - tmp += sizeof(u32) * isci_fw->phy_gens_size; - break; - - case ISCI_FW_HDR_SASADDR: - tmp++; - isci_fw->sas_addrs_size = *tmp; - tmp++; - isci_fw->sas_addrs = (const u64 *)tmp; - tmp += sizeof(u64) * isci_fw->sas_addrs_size; - break; - - default: - pr_err("bad field in firmware binary blob\n"); - return -EINVAL; - } - } - - pr_info("isci firmware v%u.%u loaded.\n", - isci_fw->version, isci_fw->subversion); - - return SCI_SUCCESS; -} - static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct isci_pci_info *pci_info; int err, i; struct isci_host *isci_host; const struct firmware *fw = NULL; + struct isci_orom *orom; check_si_rev(pdev); @@ -610,33 +474,32 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic return -ENOMEM; pci_set_drvdata(pdev, pci_info); - err = request_firmware(&fw, ISCI_FW_NAME, &pdev->dev); - if (err) { - dev_warn(&pdev->dev, - "Loading firmware failed, using default values\n"); - dev_warn(&pdev->dev, - "Default OEM configuration being used:" - " 4 narrow ports, and default SAS Addresses\n"); - } else { - isci_firmware = devm_kzalloc(&pdev->dev, - sizeof(struct isci_firmware), - GFP_KERNEL); - if (isci_firmware) { - err = isci_verify_firmware(fw, isci_firmware); - if (err != SCI_SUCCESS) { - dev_warn(&pdev->dev, - "firmware verification failed\n"); - dev_warn(&pdev->dev, - "Default OEM configuration being used:" - " 4 narrow ports, and default SAS " - "Addresses\n"); - devm_kfree(&pdev->dev, isci_firmware); - isci_firmware = NULL; - } + if (efi_enabled) { + /* do EFI parsing here */ + orom = NULL; + } else + orom = isci_request_oprom(pdev); + + if (!orom) { + orom = isci_request_firmware(pdev, fw); + if (!orom) { + /* TODO convert this to WARN_TAINT_ONCE once the + * orom/efi parameter support is widely available + */ + dev_warn(&pdev->dev, + "Loading user firmware failed, using default " + "values\n"); + dev_warn(&pdev->dev, + "Default OEM configuration being used: 4 " + "narrow ports, and default SAS Addresses\n"); } - release_firmware(fw); } + if (orom) + dev_info(&pdev->dev, "sas parameters (version: %#x) loaded\n", + orom->hdr.version); + pci_info->orom = orom; + err = isci_pci_init(pdev); if (err) return err; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index b3f63f1..83422d4 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -61,7 +61,6 @@ #include #include #include -#include #include #include #include @@ -76,34 +75,6 @@ #include "task.h" #include "sata.h" -extern struct isci_firmware *isci_firmware; - -#define ISCI_FW_NAME "isci/isci_firmware.bin" - -#define ISCI_FIRMWARE_MIN_SIZE 149 - -#define ISCI_FW_IDSIZE 12 -#define ISCI_FW_VER_OFS ISCI_FW_IDSIZE -#define ISCI_FW_SUBVER_OFS ISCI_FW_VER_OFS + 1 -#define ISCI_FW_DATA_OFS ISCI_FW_SUBVER_OFS + 1 - -#define ISCI_FW_HDR_PHYMASK 0x1 -#define ISCI_FW_HDR_PHYGEN 0x2 -#define ISCI_FW_HDR_SASADDR 0x3 -#define ISCI_FW_HDR_EOF 0xff - -struct isci_firmware { - const u8 *id; - u8 version; - u8 subversion; - const u32 *phy_masks; - u8 phy_masks_size; - const u32 *phy_gens; - u8 phy_gens_size; - const u64 *sas_addrs; - u8 sas_addrs_size; -}; - irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); irqreturn_t isci_error_isr(int vec, void *data); @@ -113,14 +84,4 @@ void scic_sds_controller_completion_handler(struct scic_sds_controller *scic); bool scic_sds_controller_error_isr(struct scic_sds_controller *scic); void scic_sds_controller_error_handler(struct scic_sds_controller *scic); -enum sci_status isci_parse_oem_parameters( - union scic_oem_parameters *oem_params, - int scu_index, - struct isci_firmware *fw); - -enum sci_status isci_parse_user_parameters( - union scic_user_parameters *user_params, - int scu_index, - struct isci_firmware *fw); - #endif /* __ISCI_H__ */ diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c new file mode 100644 index 0000000..0b90e7c --- /dev/null +++ b/drivers/scsi/isci/probe_roms.c @@ -0,0 +1,133 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + */ + +/* probe_roms - scan for oem parameters */ + +#include +#include +#include +#include + +#include "isci.h" +#include "task.h" +#include "sci_controller_constants.h" +#include "scic_remote_device.h" +#include "sci_environment.h" +#include "probe_roms.h" + +struct isci_orom *isci_request_oprom(struct pci_dev *pdev) +{ + void __iomem *oprom = pci_map_biosrom(pdev); + struct isci_orom *rom = NULL; + size_t len, i; + + if (!oprom) + return NULL; + + len = pci_biosrom_size(pdev); + rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL); + + for (i = 0; i < len && rom; i += ISCI_ROM_SIG_SIZE) { + memcpy_fromio(rom->hdr.signature, oprom + i, ISCI_ROM_SIG_SIZE); + if (memcmp(rom->hdr.signature, ISCI_ROM_SIG, + ISCI_ROM_SIG_SIZE) == 0) { + size_t copy_len = min(len - i, sizeof(*rom)); + + memcpy_fromio(rom, oprom + i, copy_len); + break; + } + } + + if (i >= len) { + dev_err(&pdev->dev, "oprom parse error\n"); + devm_kfree(&pdev->dev, rom); + rom = NULL; + } + pci_unmap_biosrom(oprom); + + return rom; +} + +/** + * isci_parse_oem_parameters() - This method will take OEM parameters + * from the module init parameters and copy them to oem_params. This will + * only copy values that are not set to the module parameter default values + * @oem_parameters: This parameter specifies the controller default OEM + * parameters. It is expected that this has been initialized to the default + * parameters for the controller + * + * + */ +enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params, + struct isci_orom *orom, int scu_index) +{ + int i; + + /* check for valid inputs */ + if (!(scu_index >= 0 + && scu_index < SCI_MAX_CONTROLLERS + && oem_params != NULL)) + return -EINVAL; + + for (i = 0; i < SCI_MAX_PHYS; i++) { + oem_params->sds1.phys[i].sas_address.low = + orom->ctrl[scu_index].phys[i].sas_address.low; + oem_params->sds1.phys[i].sas_address.high = + orom->ctrl[scu_index].phys[i].sas_address.high; + } + + for (i = 0; i < SCI_MAX_PORTS; i++) + oem_params->sds1.ports[i].phy_mask = + orom->ctrl[scu_index].ports[i].phy_mask; + + return 0; +} + +struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw) +{ + struct isci_orom *orom = NULL, *data; + + if (request_firmware(&fw, ISCI_FW_NAME, &pdev->dev) != 0) + return NULL; + + if (fw->size < sizeof(*orom)) + goto out; + + data = (struct isci_orom *)fw->data; + + if (strncmp(ISCI_ROM_SIG, data->hdr.signature, + strlen(ISCI_ROM_SIG)) != 0) + goto out; + + orom = devm_kzalloc(&pdev->dev, fw->size, GFP_KERNEL); + if (!orom) + goto out; + + memcpy(orom, fw->data, fw->size); + + out: + release_firmware(fw); + + return orom; +} diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h new file mode 100644 index 0000000..76651c0 --- /dev/null +++ b/drivers/scsi/isci/probe_roms.h @@ -0,0 +1,130 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _ISCI_PROBE_ROMS_H_ +#define _ISCI_PROBE_ROMS_H_ + +#ifdef __KERNEL__ +#include +#include + +struct isci_orom *isci_request_oprom(struct pci_dev *pdev); + +union scic_oem_parameters; +struct isci_orom; + +enum sci_status isci_parse_oem_parameters( + union scic_oem_parameters *oem_params, + struct isci_orom *orom, + int scu_index); +struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw); +int isci_get_efi_var(struct pci_dev *pdev); +#else +#define SCI_MAX_PORTS 4 +#define SCI_MAX_PHYS 4 +#endif + +#define ISCI_FW_NAME "isci/isci_firmware.bin" + +#define ROMSIGNATURE 0xaa55 + +#define ISCI_ROM_SIG "ISCUOEMB" +#define ISCI_ROM_SIG_SIZE 8 + +#define ISCI_EFI_VENDOR_GUID NULL_GUID +#define ISCI_EFI_ATTRIBUTES 0 +#define ISCI_EFI_VAR_NAME "isci_oemb" + +struct sci_bios_oem_param_block_hdr { + uint8_t signature[ISCI_ROM_SIG_SIZE]; + uint16_t total_block_length; + uint8_t hdr_length; + uint8_t version; + uint8_t preboot_source; + uint8_t num_elements; + uint8_t element_length; + uint8_t reserved[8]; +} __attribute__ ((packed)); + +struct scic_sds_oem_params { + struct { + uint8_t mode_type; + uint8_t max_concurrent_dev_spin_up; + uint8_t do_enable_ssc; + uint8_t reserved; + } controller; + + struct { + uint8_t phy_mask; + } ports[SCI_MAX_PORTS]; + + struct sci_phy_oem_params { + struct { + uint32_t high; + uint32_t low; + } sas_address; + + uint32_t afe_tx_amp_control0; + uint32_t afe_tx_amp_control1; + uint32_t afe_tx_amp_control2; + uint32_t afe_tx_amp_control3; + } phys[SCI_MAX_PHYS]; +} __attribute__ ((packed)); + +struct isci_orom { + struct sci_bios_oem_param_block_hdr hdr; + struct scic_sds_oem_params ctrl[2]; +} __attribute__ ((packed)); + +#endif diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex index 9fc9e60..7f12b39 100644 --- a/firmware/isci/isci_firmware.bin.ihex +++ b/firmware/isci/isci_firmware.bin.ihex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cgit v0.10.2 From 8db37aabaceb3dcd18754c1e782d4474e4052c81 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 23 Feb 2011 00:02:24 -0800 Subject: isci: Adding EFI variable skeletal support Adding EFI variable retrieving for OEM parameters. Still need GUID and variable name. Also updated the data struct for oem parameters and hex file for firmware Signed-off-by: Dave Jiang [fix CONFIG_EFI=n compile error] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 6551932..1310529 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -474,10 +474,9 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic return -ENOMEM; pci_set_drvdata(pdev, pci_info); - if (efi_enabled) { - /* do EFI parsing here */ - orom = NULL; - } else + if (efi_enabled) + orom = isci_get_efi_var(pdev); + else orom = isci_request_oprom(pdev); if (!orom) { diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 0b90e7c..927fead 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include "isci.h" @@ -36,6 +37,15 @@ #include "sci_environment.h" #include "probe_roms.h" +struct efi_variable { + efi_char16_t VariableName[1024/sizeof(efi_char16_t)]; + efi_guid_t VendorGuid; + unsigned long DataSize; + __u8 Data[1024]; + efi_status_t Status; + __u32 Attributes; +} __attribute__((packed)); + struct isci_orom *isci_request_oprom(struct pci_dev *pdev) { void __iomem *oprom = pci_map_biosrom(pdev); @@ -131,3 +141,57 @@ struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmw return orom; } + +static struct efi *get_efi(void) +{ + #ifdef CONFIG_EFI + return &efi; + #else + return NULL; + #endif +} + +struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) +{ + struct efi_variable *evar; + efi_status_t status; + struct isci_orom *orom = NULL; + + evar = devm_kzalloc(&pdev->dev, + sizeof(struct efi_variable), + GFP_KERNEL); + if (!evar) { + dev_warn(&pdev->dev, + "Unable to allocate memory for EFI var\n"); + return NULL; + } + + evar->DataSize = 1024; + evar->VendorGuid = ISCI_EFI_VENDOR_GUID; + evar->Attributes = ISCI_EFI_ATTRIBUTES; + + if (get_efi()) + status = get_efi()->get_variable(evar->VariableName, + &evar->VendorGuid, + &evar->Attributes, + &evar->DataSize, + evar->Data); + else + status = EFI_NOT_FOUND; + + if (status == EFI_SUCCESS) + orom = (struct isci_orom *)evar->Data; + else + dev_warn(&pdev->dev, + "Unable to obtain EFI variable for OEM parms\n"); + + if (orom && memcmp(orom->hdr.signature, ISCI_ROM_SIG, + strlen(ISCI_ROM_SIG)) != 0) + dev_warn(&pdev->dev, + "Verifying OROM signature failed\n"); + + if (!orom) + devm_kfree(&pdev->dev, evar); + + return orom; +} diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 76651c0..96d8b92 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -69,7 +69,7 @@ enum sci_status isci_parse_oem_parameters( struct isci_orom *orom, int scu_index); struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw); -int isci_get_efi_var(struct pci_dev *pdev); +struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); #else #define SCI_MAX_PORTS 4 #define SCI_MAX_PHYS 4 -- cgit v0.10.2 From 07373a5caa29e4159ef1ea5e72985ddaf013519a Mon Sep 17 00:00:00 2001 From: Henryk Dembkowski Date: Wed, 23 Feb 2011 16:55:11 -0800 Subject: isci: add support for 2 more oem parmeters 1/ add OEM paramater support for mode_type (MPC vs APC) 2/ add OEM parameter support for max_number_concurrent_device_spin_up 3/ cleanup scic_sds_controller_start_next_phy todo: hook up the amp control afe parameters into the afe init code Signed-off-by: Henryk Dembkowski Signed-off-by: Jacek Danecki [cleaned up scic_sds_controller_start_next_phy] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index 5e1345d..f64f24f 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -224,6 +224,8 @@ union scic_user_parameters { */ #define SCIC_SDS_PARM_PHY_MASK_MAX 0xF +#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 + /** * This structure/union specifies the various different OEM parameter sets * available. Each type is specific to a hardware controller version. @@ -237,7 +239,6 @@ union scic_oem_parameters { * 1. */ struct scic_sds_oem_params sds1; - }; /** diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index e7f3711..12b2ad5 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -293,6 +293,7 @@ void scic_sds_controller_initialize_power_control( ); this_controller->power_control.phys_waiting = 0; + this_controller->power_control.phys_granted_power = 0; } /* --------------------------------------------------------------------------- */ @@ -770,31 +771,6 @@ void scic_sds_controller_timeout_handler( __func__); } -/** - * scic_sds_controller_get_port_configuration_mode - * @this_controller: This is the controller to use to determine if we are using - * manual or automatic port configuration. - * - * SCIC_PORT_CONFIGURATION_MODE - */ -enum SCIC_PORT_CONFIGURATION_MODE scic_sds_controller_get_port_configuration_mode( - struct scic_sds_controller *this_controller) -{ - u32 index; - enum SCIC_PORT_CONFIGURATION_MODE mode; - - mode = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; - - for (index = 0; index < SCI_MAX_PORTS; index++) { - if (this_controller->oem_parameters.sds1.ports[index].phy_mask != 0) { - mode = SCIC_PORT_MANUAL_CONFIGURATION_MODE; - break; - } - } - - return mode; -} - enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) { u32 index; @@ -859,7 +835,7 @@ void scic_sds_controller_phy_timer_stop( /** * This method is called internally by the controller object to start the next - * phy on the controller. If all the phys have been starte, then this + * phy on the controller. If all the phys have been started, then this * method will attempt to transition the controller to the READY state and * inform the user (scic_cb_controller_start_complete()). * @this_controller: This parameter specifies the controller object for which @@ -867,101 +843,88 @@ void scic_sds_controller_phy_timer_stop( * * enum sci_status */ -enum sci_status scic_sds_controller_start_next_phy( - struct scic_sds_controller *this_controller) +enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) { + struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; + struct scic_sds_phy *sci_phy; enum sci_status status; status = SCI_SUCCESS; - if (this_controller->phy_startup_timer_pending == false) { - if (this_controller->next_phy_to_start == SCI_MAX_PHYS) { - bool is_controller_start_complete = true; - struct scic_sds_phy *the_phy; - u8 index; + if (scic->phy_startup_timer_pending) + return status; - for (index = 0; index < SCI_MAX_PHYS; index++) { - the_phy = &this_controller->phy_table[index]; - - if (scic_sds_phy_get_port(the_phy) != NULL) { - /** - * The controller start operation is complete if and only - * if: - * - all links have been given an opportunity to start - * - have no indication of a connected device - * - have an indication of a connected device and it has - * finished the link training process. - */ - if ( - ( - (the_phy->is_in_link_training == false) - && (the_phy->parent.state_machine.current_state_id - == SCI_BASE_PHY_STATE_INITIAL) - ) - || ( - (the_phy->is_in_link_training == false) - && (the_phy->parent.state_machine.current_state_id - == SCI_BASE_PHY_STATE_STOPPED) - ) - || ( - (the_phy->is_in_link_training == true) - && (the_phy->parent.state_machine.current_state_id - == SCI_BASE_PHY_STATE_STARTING) - ) - ) { - is_controller_start_complete = false; - break; - } - } - } + if (scic->next_phy_to_start >= SCI_MAX_PHYS) { + bool is_controller_start_complete = true; + u32 state; + u8 index; - /* - * The controller has successfully finished the start process. - * Inform the SCI Core user and transition to the READY state. */ - if (is_controller_start_complete == true) { - scic_sds_controller_transition_to_ready( - this_controller, SCI_SUCCESS - ); - scic_sds_controller_phy_timer_stop(this_controller); + for (index = 0; index < SCI_MAX_PHYS; index++) { + sci_phy = &scic->phy_table[index]; + state = sci_phy->parent.state_machine.current_state_id; + + if (!scic_sds_phy_get_port(sci_phy)) + continue; + + /* The controller start operation is complete iff: + * - all links have been given an opportunity to start + * - have no indication of a connected device + * - have an indication of a connected device and it has + * finished the link training process. + */ + if ((sci_phy->is_in_link_training == false && + state == SCI_BASE_PHY_STATE_INITIAL) || + (sci_phy->is_in_link_training == false && + state == SCI_BASE_PHY_STATE_STOPPED) || + (sci_phy->is_in_link_training == true && + state == SCI_BASE_PHY_STATE_STARTING)) { + is_controller_start_complete = false; + break; } - } else { - struct scic_sds_phy *the_phy; - - the_phy = &this_controller->phy_table[this_controller->next_phy_to_start]; + } - if ( - scic_sds_controller_get_port_configuration_mode(this_controller) - == SCIC_PORT_MANUAL_CONFIGURATION_MODE - ) { - if (scic_sds_phy_get_port(the_phy) == NULL) { - this_controller->next_phy_to_start++; - - /* - * Caution recursion ahead be forwarned - * - * The PHY was never added to a PORT in MPC mode so start the next phy in sequence - * This phy will never go link up and will not draw power the OEM parameters either - * configured the phy incorrectly for the PORT or it was never assigned to a PORT */ - return scic_sds_controller_start_next_phy(this_controller); - } + /* + * The controller has successfully finished the start process. + * Inform the SCI Core user and transition to the READY state. */ + if (is_controller_start_complete == true) { + scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS); + scic_sds_controller_phy_timer_stop(scic); + } + } else { + sci_phy = &scic->phy_table[scic->next_phy_to_start]; + + if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + if (scic_sds_phy_get_port(sci_phy) == NULL) { + scic->next_phy_to_start++; + + /* Caution recursion ahead be forwarned + * + * The PHY was never added to a PORT in MPC mode + * so start the next phy in sequence This phy + * will never go link up and will not draw power + * the OEM parameters either configured the phy + * incorrectly for the PORT or it was never + * assigned to a PORT + */ + return scic_sds_controller_start_next_phy(scic); } + } - status = scic_sds_phy_start(the_phy); + status = scic_sds_phy_start(sci_phy); - if (status == SCI_SUCCESS) { - scic_sds_controller_phy_timer_start(this_controller); - } else { - dev_warn(scic_to_dev(this_controller), - "%s: Controller stop operation failed " - "to stop phy %d because of status " - "%d.\n", - __func__, - this_controller->phy_table[this_controller->next_phy_to_start].phy_index, - status); - } - - this_controller->next_phy_to_start++; + if (status == SCI_SUCCESS) { + scic_sds_controller_phy_timer_start(scic); + } else { + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed " + "to stop phy %d because of status " + "%d.\n", + __func__, + scic->phy_table[scic->next_phy_to_start].phy_index, + status); } + + scic->next_phy_to_start++; } return status; @@ -1059,6 +1022,31 @@ static void scic_sds_controller_power_control_timer_start( } /** + * This method stops the power control timer for this controller object. + * + * @param scic + */ +void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic) +{ + if (scic->power_control.timer_started) { + isci_event_timer_stop(scic, scic->power_control.timer); + scic->power_control.timer_started = false; + } +} + +/** + * This method stops and starts the power control timer for this controller object. + * + * @param scic + */ +void scic_sds_controller_power_control_timer_restart( + struct scic_sds_controller *scic) +{ + scic_sds_controller_power_control_timer_stop(scic); + scic_sds_controller_power_control_timer_start(scic); +} + +/** * * * @@ -1070,6 +1058,8 @@ static void scic_sds_controller_power_control_timer_handler( this_controller = (struct scic_sds_controller *)controller; + this_controller->power_control.phys_granted_power = 0; + if (this_controller->power_control.phys_waiting == 0) { this_controller->power_control.timer_started = false; } else { @@ -1081,19 +1071,24 @@ static void scic_sds_controller_power_control_timer_handler( && (this_controller->power_control.phys_waiting != 0); i++) { if (this_controller->power_control.requesters[i] != NULL) { - the_phy = this_controller->power_control.requesters[i]; - this_controller->power_control.requesters[i] = NULL; - this_controller->power_control.phys_waiting--; - break; + if (this_controller->power_control.phys_granted_power < + this_controller->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + the_phy = this_controller->power_control.requesters[i]; + this_controller->power_control.requesters[i] = NULL; + this_controller->power_control.phys_waiting--; + this_controller->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(the_phy); + } else { + break; + } } } /* * It doesn't matter if the power list is empty, we need to start the - * timer in case another phy becomes ready. */ + * timer in case another phy becomes ready. + */ scic_sds_controller_power_control_timer_start(this_controller); - - scic_sds_phy_consume_power_handler(the_phy); } } @@ -1109,15 +1104,20 @@ void scic_sds_controller_power_control_queue_insert( { BUG_ON(the_phy == NULL); - if ( - (this_controller->power_control.timer_started) - && (this_controller->power_control.requesters[the_phy->phy_index] == NULL) - ) { + if (this_controller->power_control.phys_granted_power < + this_controller->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + this_controller->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(the_phy); + + /* + * stop and start the power_control timer. When the timer fires, the + * no_of_phys_granted_power will be set to 0 + */ + scic_sds_controller_power_control_timer_restart(this_controller); + } else { + /* Add the phy in the waiting list */ this_controller->power_control.requesters[the_phy->phy_index] = the_phy; this_controller->power_control.phys_waiting++; - } else { - scic_sds_controller_power_control_timer_start(this_controller); - scic_sds_phy_consume_power_handler(the_phy); } } @@ -2021,7 +2021,7 @@ void scic_sds_controller_release_frame( * This method sets user parameters and OEM parameters to default values. * Users can override these values utilizing the scic_user_parameters_set() * and scic_oem_parameters_set() methods. - * @controller: This parameter specifies the controller for which to set the + * @scic: This parameter specifies the controller for which to set the * configuration parameters to their default values. * */ @@ -2029,6 +2029,12 @@ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_co { u16 index; + /* Default to APC mode. */ + scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; + + /* Default to APC mode. */ + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1; + /* Default to no SSC operation. */ scic->oem_parameters.sds1.controller.do_enable_ssc = false; @@ -2607,6 +2613,7 @@ enum sci_status scic_oem_parameters_set( == SCI_BASE_CONTROLLER_STATE_INITIALIZED) ) { u16 index; + u8 combined_phy_mask = 0; /* * Validate the oem parameters. If they are not legal, then @@ -2626,6 +2633,24 @@ enum sci_status scic_oem_parameters_set( } } + if (scic_parms->sds1.controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (scic_parms->sds1.ports[index].phy_mask != 0) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + } else if (scic_parms->sds1.controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + for (index = 0; index < SCI_MAX_PHYS; index++) + combined_phy_mask |= scic_parms->sds1.ports[index].phy_mask; + + if (combined_phy_mask == 0) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } else { + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + if (scic_parms->sds1.controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + memcpy(&scic->oem_parameters, scic_parms, sizeof(*scic_parms)); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 9b8e55d..6386a64 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -122,23 +122,6 @@ enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS { /** - * - * - * Allowed PORT configuration modes APC Automatic PORT configuration mode is - * defined by the OEM configuration parameters providing no PHY_MASK parameters - * for any PORT. i.e. There are no phys assigned to any of the ports at start. - * MPC Manual PORT configuration mode is defined by the OEM configuration - * parameters providing a PHY_MASK value for any PORT. It is assumed that any - * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned. - * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs - * being assigned is sufficient to declare manual PORT configuration. - */ -enum SCIC_PORT_CONFIGURATION_MODE { - SCIC_PORT_MANUAL_CONFIGURATION_MODE, - SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE -}; - -/** * struct scic_power_control - * * This structure defines the fields for managing power control for direct @@ -164,6 +147,11 @@ struct scic_power_control { u8 phys_waiting; /** + * This field is used to keep track of how many phys have been granted to consume power + */ + u8 phys_granted_power; + + /** * This field is an array of phys that we are waiting on. The phys are direct * mapped into requesters via struct scic_sds_phy.phy_index */ @@ -560,14 +548,6 @@ u32 scic_sds_controller_get_object_size(void); /* --------------------------------------------------------------------------- */ - -/* --------------------------------------------------------------------------- */ - -enum SCIC_PORT_CONFIGURATION_MODE scic_sds_controller_get_port_configuration_mode( - struct scic_sds_controller *this_controller); - -/* --------------------------------------------------------------------------- */ - void scic_sds_controller_post_request( struct scic_sds_controller *this_controller, u32 request); diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index e26a4e6..7c95210 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -822,7 +822,7 @@ enum sci_status scic_sds_port_configuration_agent_initialize( enum sci_status status = SCI_SUCCESS; enum SCIC_PORT_CONFIGURATION_MODE mode; - mode = scic_sds_controller_get_port_configuration_mode(controller); + mode = controller->oem_parameters.sds1.controller.mode_type; if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { status = scic_sds_mpc_agent_validate_phy_configuration(controller, port_agent); diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h index bedbe4f..788a8de 100644 --- a/drivers/scsi/isci/firmware/create_fw.h +++ b/drivers/scsi/isci/firmware/create_fw.h @@ -1,5 +1,6 @@ #ifndef _CREATE_FW_H_ #define _CREATE_FW_H_ +#include "../probe_roms.h" /* we are configuring for 2 SCUs */ @@ -24,16 +25,16 @@ static const int num_elements = 2; * if there is a port/phy on which you do not wish to override the default * values, use the value assigned to UNINIT_PARAM (255). */ +/* discovery mode type (port auto config mode by default ) */ #ifdef MPC +static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE; static const __u8 phy_mask[2][4] = { {1, 2, 4, 8}, {1, 2, 4, 8} }; #else /* APC (default) */ +static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; static const __u8 phy_mask[2][4]; #endif -/* discovery mode type (port auto config mode by default ) */ -static const int mode_type; - /* Maximum number of concurrent device spin up */ static const int max_num_concurrent_dev_spin_up = 1; diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 96d8b92..69526ff 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -86,6 +86,20 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); #define ISCI_EFI_ATTRIBUTES 0 #define ISCI_EFI_VAR_NAME "isci_oemb" +/* Allowed PORT configuration modes APC Automatic PORT configuration mode is + * defined by the OEM configuration parameters providing no PHY_MASK parameters + * for any PORT. i.e. There are no phys assigned to any of the ports at start. + * MPC Manual PORT configuration mode is defined by the OEM configuration + * parameters providing a PHY_MASK value for any PORT. It is assumed that any + * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned. + * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs + * being assigned is sufficient to declare manual PORT configuration. + */ +enum SCIC_PORT_CONFIGURATION_MODE { + SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0, + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1 +}; + struct sci_bios_oem_param_block_hdr { uint8_t signature[ISCI_ROM_SIG_SIZE]; uint16_t total_block_length; diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex index 7f12b39..b1bb5cf 100644 --- a/firmware/isci/isci_firmware.bin.ihex +++ b/firmware/isci/isci_firmware.bin.ihex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cgit v0.10.2 From ca507b98e65f539e0b3866b6aa8efd76c13be285 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 24 Feb 2011 13:09:39 -0700 Subject: isci: update efi variable name and guid These are the finalized values that the driver can expect to see in production. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 69526ff..02940e7 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -73,6 +73,7 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); #else #define SCI_MAX_PORTS 4 #define SCI_MAX_PHYS 4 +#define SCI_MAX_CONTROLLERS 2 #endif #define ISCI_FW_NAME "isci/isci_firmware.bin" @@ -82,9 +83,11 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); #define ISCI_ROM_SIG "ISCUOEMB" #define ISCI_ROM_SIG_SIZE 8 -#define ISCI_EFI_VENDOR_GUID NULL_GUID +#define ISCI_EFI_VENDOR_GUID \ + EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \ + 0x1a, 0x04, 0xc6) #define ISCI_EFI_ATTRIBUTES 0 -#define ISCI_EFI_VAR_NAME "isci_oemb" +#define ISCI_EFI_VAR_NAME "RST_SCU_OEM" /* Allowed PORT configuration modes APC Automatic PORT configuration mode is * defined by the OEM configuration parameters providing no PHY_MASK parameters @@ -138,7 +141,7 @@ struct scic_sds_oem_params { struct isci_orom { struct sci_bios_oem_param_block_hdr hdr; - struct scic_sds_oem_params ctrl[2]; + struct scic_sds_oem_params ctrl[SCI_MAX_CONTROLLERS]; } __attribute__ ((packed)); #endif -- cgit v0.10.2 From 02839a8b51002d90e4b7c52bf37531834b063f71 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 24 Feb 2011 17:45:57 -0800 Subject: isci: copy the oem parameters instead of assign Since the data structure for oem from orom/efi/firmware is the same as what the core uses, we can just do a direct copy instead of assignment. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 927fead..8222405 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -92,24 +92,14 @@ struct isci_orom *isci_request_oprom(struct pci_dev *pdev) enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params, struct isci_orom *orom, int scu_index) { - int i; - /* check for valid inputs */ - if (!(scu_index >= 0 - && scu_index < SCI_MAX_CONTROLLERS - && oem_params != NULL)) + if (scu_index < 0 || scu_index > SCI_MAX_CONTROLLERS || + scu_index > orom->hdr.num_elements || !oem_params) return -EINVAL; - for (i = 0; i < SCI_MAX_PHYS; i++) { - oem_params->sds1.phys[i].sas_address.low = - orom->ctrl[scu_index].phys[i].sas_address.low; - oem_params->sds1.phys[i].sas_address.high = - orom->ctrl[scu_index].phys[i].sas_address.high; - } - - for (i = 0; i < SCI_MAX_PORTS; i++) - oem_params->sds1.ports[i].phy_mask = - orom->ctrl[scu_index].ports[i].phy_mask; + memcpy(oem_params, + &orom->ctrl[scu_index], + sizeof(struct scic_sds_oem_params)); return 0; } -- cgit v0.10.2 From 3b67c1f376acb24b7c6679f75275ac5a96792986 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Mar 2011 09:53:51 -0800 Subject: isci: fixup with testing from isci OROM in BIOS Added fixups for the OROM parsing code after testing with BIOS OROM Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 1310529..ef0c49a 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -495,8 +495,11 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic } if (orom) - dev_info(&pdev->dev, "sas parameters (version: %#x) loaded\n", - orom->hdr.version); + dev_info(&pdev->dev, + "OEM SAS parameters (version: %u.%u) loaded\n", + (orom->hdr.version & 0xf0) >> 4, + (orom->hdr.version & 0xf)); + pci_info->orom = orom; err = isci_pci_init(pdev); diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 8222405..64e9a80 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -51,6 +51,10 @@ struct isci_orom *isci_request_oprom(struct pci_dev *pdev) void __iomem *oprom = pci_map_biosrom(pdev); struct isci_orom *rom = NULL; size_t len, i; + int j; + char oem_sig[4]; + struct isci_oem_hdr oem_hdr; + u8 *tmp, sum; if (!oprom) return NULL; @@ -58,13 +62,45 @@ struct isci_orom *isci_request_oprom(struct pci_dev *pdev) len = pci_biosrom_size(pdev); rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL); - for (i = 0; i < len && rom; i += ISCI_ROM_SIG_SIZE) { - memcpy_fromio(rom->hdr.signature, oprom + i, ISCI_ROM_SIG_SIZE); - if (memcmp(rom->hdr.signature, ISCI_ROM_SIG, - ISCI_ROM_SIG_SIZE) == 0) { - size_t copy_len = min(len - i, sizeof(*rom)); + for (i = 0; i < len && rom; i += ISCI_OEM_SIG_SIZE) { + memcpy_fromio(oem_sig, oprom + i, ISCI_OEM_SIG_SIZE); - memcpy_fromio(rom, oprom + i, copy_len); + /* we think we found the OEM table */ + if (memcmp(oem_sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) == 0) { + size_t copy_len; + + memcpy_fromio(&oem_hdr, oprom + i, sizeof(oem_hdr)); + + copy_len = min(oem_hdr.len - sizeof(oem_hdr), + sizeof(*rom)); + + memcpy_fromio(rom, + oprom + i + sizeof(oem_hdr), + copy_len); + + /* calculate checksum */ + tmp = (u8 *)&oem_hdr; + for (j = 0, sum = 0; j < sizeof(oem_hdr); j++, tmp++) + sum += *tmp; + + tmp = (u8 *)rom; + for (j = 0; j < sizeof(*rom); j++, tmp++) + sum += *tmp; + + if (sum != 0) { + dev_warn(&pdev->dev, + "OEM table checksum failed\n"); + continue; + } + + /* keep going if that's not the oem param table */ + if (memcmp(rom->hdr.signature, + ISCI_ROM_SIG, + ISCI_ROM_SIG_SIZE) != 0) + continue; + + dev_info(&pdev->dev, + "OEM parameter table found in OROM\n"); break; } } diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 02940e7..0449239 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -70,6 +70,17 @@ enum sci_status isci_parse_oem_parameters( int scu_index); struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw); struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); + +struct isci_oem_hdr { + u8 sig[4]; + u8 rev_major; + u8 rev_minor; + u16 len; + u8 checksum; + u8 reserved1; + u16 reserved2; +} __attribute__ ((packed)); + #else #define SCI_MAX_PORTS 4 #define SCI_MAX_PHYS 4 @@ -80,6 +91,8 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); #define ROMSIGNATURE 0xaa55 +#define ISCI_OEM_SIG "$OEM" +#define ISCI_OEM_SIG_SIZE 4 #define ISCI_ROM_SIG "ISCUOEMB" #define ISCI_ROM_SIG_SIZE 8 -- cgit v0.10.2 From 2e8320f751030a12efc3e64ee857bfa4647f81fe Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 11 Mar 2011 14:04:43 -0800 Subject: isci: Fixup for OEM parameter EFI variable retrieval Updating the EFI variable OEM parameter retrieval after examining the EFI variable exported via sysfs. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 64e9a80..0d968d3 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -61,6 +61,11 @@ struct isci_orom *isci_request_oprom(struct pci_dev *pdev) len = pci_biosrom_size(pdev); rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL); + if (!rom) { + dev_warn(&pdev->dev, + "Unable to allocate memory for orom\n"); + return NULL; + } for (i = 0; i < len && rom; i += ISCI_OEM_SIG_SIZE) { memcpy_fromio(oem_sig, oprom + i, ISCI_OEM_SIG_SIZE); @@ -181,7 +186,11 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) { struct efi_variable *evar; efi_status_t status; - struct isci_orom *orom = NULL; + struct isci_orom *rom = NULL; + struct isci_oem_hdr *oem_hdr; + u8 *tmp, sum; + int j; + size_t copy_len; evar = devm_kzalloc(&pdev->dev, sizeof(struct efi_variable), @@ -192,6 +201,16 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) return NULL; } + rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL); + if (!rom) { + dev_warn(&pdev->dev, + "Unable to allocate memory for orom\n"); + return NULL; + } + + for (j = 0; j < strlen(ISCI_EFI_VAR_NAME) + 1; j++) + evar->VariableName[j] = ISCI_EFI_VAR_NAME[j]; + evar->DataSize = 1024; evar->VendorGuid = ISCI_EFI_VENDOR_GUID; evar->Attributes = ISCI_EFI_ATTRIBUTES; @@ -205,19 +224,48 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) else status = EFI_NOT_FOUND; - if (status == EFI_SUCCESS) - orom = (struct isci_orom *)evar->Data; - else + if (status != EFI_SUCCESS) { dev_warn(&pdev->dev, "Unable to obtain EFI variable for OEM parms\n"); + return NULL; + } + + oem_hdr = (struct isci_oem_hdr *)evar->Data; - if (orom && memcmp(orom->hdr.signature, ISCI_ROM_SIG, - strlen(ISCI_ROM_SIG)) != 0) + if (memcmp(oem_hdr->sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) != 0) { dev_warn(&pdev->dev, - "Verifying OROM signature failed\n"); + "Invalid OEM header signature\n"); + return NULL; + } - if (!orom) - devm_kfree(&pdev->dev, evar); + /* calculate checksum */ + tmp = (u8 *)oem_hdr; + for (j = 0, sum = 0; j < sizeof(oem_hdr); j++, tmp++) + sum += *tmp; - return orom; + tmp = (u8 *)rom; + for (j = 0; j < sizeof(*rom); j++, tmp++) + sum += *tmp; + + if (sum != 0) { + dev_warn(&pdev->dev, + "OEM table checksum failed\n"); + return NULL; + } + + copy_len = min(evar->DataSize, + min(oem_hdr->len - sizeof(*oem_hdr), + sizeof(*rom))); + + memcpy(rom, (char *)evar->Data + sizeof(*oem_hdr), copy_len); + + if (memcmp(rom->hdr.signature, + ISCI_ROM_SIG, + ISCI_ROM_SIG_SIZE) != 0) { + dev_warn(&pdev->dev, + "Invalid OEM table signature\n"); + return NULL; + } + + return rom; } diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 0449239..c2162cf 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -100,7 +100,7 @@ struct isci_oem_hdr { EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \ 0x1a, 0x04, 0xc6) #define ISCI_EFI_ATTRIBUTES 0 -#define ISCI_EFI_VAR_NAME "RST_SCU_OEM" +#define ISCI_EFI_VAR_NAME "RstScuO" /* Allowed PORT configuration modes APC Automatic PORT configuration mode is * defined by the OEM configuration parameters providing no PHY_MASK parameters -- cgit v0.10.2 From 4711ba10b13891edf228944a9d0a21dfe7fe90f0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 11 Mar 2011 10:43:57 -0800 Subject: isci: fix oem parameter initialization and mode detection 1/ Since commit 858d4aa7 "isci: Move firmware loading to per PCI device" we have been silently falling back to built-in defaults for the parameter settings by skipping the call to scic_oem_parameters_set(). 2/ The afe parameters from the firmware were not being honored 3/ The latest oem parameter definition flips the mode_type values which are now 0: for APC 1: for MPC. For APC we need to make sure all the phys default to the same address otherwise strict_wide_ports will cause duplicate domains. 4/ Fix up the driver announcement to indicate the source of the parameters. 5/ Fix up the sas addresses to be unique per controller (in the fallback case) Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_controller.h b/drivers/scsi/isci/core/sci_base_controller.h index 36c5340..8e0c46f 100644 --- a/drivers/scsi/isci/core/sci_base_controller.h +++ b/drivers/scsi/isci/core/sci_base_controller.h @@ -289,8 +289,6 @@ static inline void sci_base_controller_construct( u32 mde_count, struct sci_base_memory_descriptor_list *next_mdl) { - scic_base->parent.private = NULL; - sci_base_state_machine_construct( &scic_base->state_machine, &scic_base->parent, diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 12b2ad5..b0edd84 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -595,6 +595,7 @@ void scic_sds_controller_enable_port_task_scheduler( */ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) { + const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; u32 afe_status; u32 phy_id; @@ -632,6 +633,8 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) } for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; + if (is_b0()) { /* Configure transmitter SSC parameters */ scu_afe_txreg_write(scic, phy_id, afe_tx_ssc_control, 0x00030000); @@ -691,16 +694,16 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) } udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, 0x000E7C03); + scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control0); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control1, 0x000E7C03); + scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control1); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control2, 0x000E7C03); + scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control2); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control3, 0x000E7C03); + scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control3); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -2027,6 +2030,7 @@ void scic_sds_controller_release_frame( */ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) { + struct isci_host *ihost = sci_object_get_association(scic); u16 index; /* Default to APC mode. */ @@ -2058,7 +2062,7 @@ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_co * is worked around by having the upper 32-bits of SAS address * with a value greater then the Vitesse company identifier. * Hence, usage of 0x5FCFFFFF. */ - scic->oem_parameters.sds1.phys[index].sas_address.low = 0x00000001; + scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id; scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; } @@ -2604,14 +2608,11 @@ enum sci_status scic_oem_parameters_set( struct scic_sds_controller *scic, union scic_oem_parameters *scic_parms) { - if ( - (scic->parent.state_machine.current_state_id - == SCI_BASE_CONTROLLER_STATE_RESET) - || (scic->parent.state_machine.current_state_id - == SCI_BASE_CONTROLLER_STATE_INITIALIZING) - || (scic->parent.state_machine.current_state_id - == SCI_BASE_CONTROLLER_STATE_INITIALIZED) - ) { + u32 state = scic->parent.state_machine.current_state_id; + + if (state == SCI_BASE_CONTROLLER_STATE_RESET || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { u16 index; u8 combined_phy_mask = 0; @@ -2651,7 +2652,8 @@ enum sci_status scic_oem_parameters_set( if (scic_parms->sds1.controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - memcpy(&scic->oem_parameters, scic_parms, sizeof(*scic_parms)); + scic->oem_parameters.sds1 = scic_parms->sds1; + return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c index f8f96d6..c7a2887 100644 --- a/drivers/scsi/isci/firmware/create_fw.c +++ b/drivers/scsi/isci/firmware/create_fw.c @@ -44,7 +44,7 @@ void set_binary_values(struct isci_orom *isci_orom) /* setting OROM signature */ strncpy(isci_orom->hdr.signature, sig, strlen(sig)); - isci_orom->hdr.version = 0x10; + isci_orom->hdr.version = version; isci_orom->hdr.total_block_length = sizeof(struct isci_orom); isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr); isci_orom->hdr.num_elements = num_elements; @@ -65,6 +65,15 @@ void set_binary_values(struct isci_orom *isci_orom) (__u32)(sas_addr[ctrl_idx][phy_idx] >> 32); isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low = (__u32)(sas_addr[ctrl_idx][phy_idx]); + + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 = + afe_tx_amp_control0; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 = + afe_tx_amp_control1; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 = + afe_tx_amp_control2; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 = + afe_tx_amp_control3; } } } diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h index 788a8de..9f9afbd 100644 --- a/drivers/scsi/isci/firmware/create_fw.h +++ b/drivers/scsi/isci/firmware/create_fw.h @@ -25,14 +25,37 @@ static const int num_elements = 2; * if there is a port/phy on which you do not wish to override the default * values, use the value assigned to UNINIT_PARAM (255). */ + /* discovery mode type (port auto config mode by default ) */ + +/* + * if there is a port/phy on which you do not wish to override the default + * values, use the value "0000000000000000". SAS address of zero's is + * considered invalid and will not be used. + */ #ifdef MPC static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE; static const __u8 phy_mask[2][4] = { {1, 2, 4, 8}, {1, 2, 4, 8} }; +static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL, + 0x5FCFFFFFF0000002ULL, + 0x5FCFFFFFF0000003ULL, + 0x5FCFFFFFF0000004ULL }, + { 0x5FCFFFFFF0000005ULL, + 0x5FCFFFFFF0000006ULL, + 0x5FCFFFFFF0000007ULL, + 0x5FCFFFFFF0000008ULL } }; #else /* APC (default) */ static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; static const __u8 phy_mask[2][4]; +static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL }, + { 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL } }; #endif /* Maximum number of concurrent device spin up */ @@ -47,22 +70,8 @@ static const unsigned int afe_tx_amp_control1 = 0x000e7c03; static const unsigned int afe_tx_amp_control2 = 0x000e7c03; static const unsigned int afe_tx_amp_control3 = 0x000e7c03; -/* - * if there is a port/phy on which you do not wish to override the default - * values, use the value "0000000000000000". SAS address of zero's is - * considered invalid and will not be used. - */ -static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000000ULL, - 0x5FCFFFFFF1000000ULL, - 0x5FCFFFFFF2000000ULL, - 0x5FCFFFFFF3000000ULL }, - { 0x5FCFFFFFF4000000ULL, - 0x5FCFFFFFF5000000ULL, - 0x5FCFFFFFF6000000ULL, - 0x5FCFFFFFF7000000ULL } }; - static const char blob_name[] = "isci_firmware.bin"; static const char sig[] = "ISCUOEMB"; -static const unsigned char version = 1; +static const unsigned char version = 0x10; #endif diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index bb5b54d..d6e2a73 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -418,7 +418,7 @@ int isci_host_init(struct isci_host *isci_host) int err = 0, i; enum sci_status status; struct scic_sds_controller *controller; - union scic_oem_parameters scic_oem_params; + union scic_oem_parameters oem; union scic_user_parameters scic_user_params; struct isci_pci_info *pci_info = to_pci_info(isci_host->pdev); @@ -435,6 +435,7 @@ int isci_host_init(struct isci_host *isci_host) } isci_host->core_controller = controller; + sci_object_set_association(isci_host->core_controller, isci_host); spin_lock_init(&isci_host->state_lock); spin_lock_init(&isci_host->scic_lock); spin_lock_init(&isci_host->queue_lock); @@ -457,12 +458,6 @@ int isci_host_init(struct isci_host *isci_host) isci_host->sas_ha.dev = &isci_host->pdev->dev; isci_host->sas_ha.lldd_ha = isci_host; - /*----------- SCIC controller Initialization Stuff ------------------ - * set association host adapter struct in core controller. - */ - sci_object_set_association(isci_host->core_controller, - (void *)isci_host); - /* * grab initial values stored in the controller object for OEM and USER * parameters @@ -477,11 +472,11 @@ int isci_host_init(struct isci_host *isci_host) return -ENODEV; } - scic_oem_parameters_get(controller, &scic_oem_params); + scic_oem_parameters_get(controller, &oem); /* grab any OEM parameters specified in orom */ if (pci_info->orom) { - status = isci_parse_oem_parameters(&scic_oem_params, + status = isci_parse_oem_parameters(&oem, pci_info->orom, isci_host->id); if (status != SCI_SUCCESS) { @@ -489,15 +484,14 @@ int isci_host_init(struct isci_host *isci_host) "parsing firmware oem parameters failed\n"); return -EINVAL; } - } else { - status = scic_oem_parameters_set(isci_host->core_controller, - &scic_oem_params); - if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "%s: scic_oem_parameters_set failed\n", - __func__); - return -ENODEV; - } + } + + status = scic_oem_parameters_set(isci_host->core_controller, &oem); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: scic_oem_parameters_set failed\n", + __func__); + return -ENODEV; } tasklet_init(&isci_host->completion_tasklet, diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index ef0c49a..51a7bce 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -466,6 +466,7 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic struct isci_host *isci_host; const struct firmware *fw = NULL; struct isci_orom *orom; + char *source = "(platform)"; check_si_rev(pdev); @@ -480,6 +481,7 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic orom = isci_request_oprom(pdev); if (!orom) { + source = "(firmware)"; orom = isci_request_firmware(pdev, fw); if (!orom) { /* TODO convert this to WARN_TAINT_ONCE once the @@ -496,9 +498,9 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic if (orom) dev_info(&pdev->dev, - "OEM SAS parameters (version: %u.%u) loaded\n", + "OEM SAS parameters (version: %u.%u) loaded %s\n", (orom->hdr.version & 0xf0) >> 4, - (orom->hdr.version & 0xf)); + (orom->hdr.version & 0xf), source); pci_info->orom = orom; diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 0d968d3..1697487 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -138,10 +138,7 @@ enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params, scu_index > orom->hdr.num_elements || !oem_params) return -EINVAL; - memcpy(oem_params, - &orom->ctrl[scu_index], - sizeof(struct scic_sds_oem_params)); - + oem_params->sds1 = orom->ctrl[scu_index]; return 0; } diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index c2162cf..1b44483 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -96,6 +96,10 @@ struct isci_oem_hdr { #define ISCI_ROM_SIG "ISCUOEMB" #define ISCI_ROM_SIG_SIZE 8 +#define ISCI_PREBOOT_SOURCE_INIT (0x00) +#define ISCI_PREBOOT_SOURCE_OROM (0x80) +#define ISCI_PREBOOT_SOURCE_EFI (0x81) + #define ISCI_EFI_VENDOR_GUID \ EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \ 0x1a, 0x04, 0xc6) @@ -112,8 +116,8 @@ struct isci_oem_hdr { * being assigned is sufficient to declare manual PORT configuration. */ enum SCIC_PORT_CONFIGURATION_MODE { - SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0, - SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1 + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 0, + SCIC_PORT_MANUAL_CONFIGURATION_MODE = 1 }; struct sci_bios_oem_param_block_hdr { diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex index b1bb5cf..4f8767c 100644 --- a/firmware/isci/isci_firmware.bin.ihex +++ b/firmware/isci/isci_firmware.bin.ihex @@ -1,16 +1,16 @@ :10000000495343554F454D42E70017100002000089 -:10001000000000000000000101000000000000FFDF -:10002000FFCF5F000000F0000000000000000000B3 -:1000300000000000000000FFFFCF5F000000F100A3 -:10004000000000000000000000000000000000FFB1 -:10005000FFCF5F000000F200000000000000000081 -:1000600000000000000000FFFFCF5F000000F30071 -:10007000000000000000000000000000000000017F -:1000800001000000000000FFFFCF5F000000F4004F -:10009000000000000000000000000000000000FF61 -:1000A000FFCF5F000000F50000000000000000002E -:1000B00000000000000000FFFFCF5F000000F6001E -:1000C000000000000000000000000000000000FF31 -:1000D000FFCF5F000000F7000000000000000000FC -:0700E0000000000000000019 +:10001000000000000000000001000000000000FFE0 +:10002000FFCF5F01000000037C0E00037C0E000385 +:100030007C0E00037C0E00FFFFCF5F010000000379 +:100040007C0E00037C0E00037C0E00037C0E00FF80 +:10005000FFCF5F01000000037C0E00037C0E000355 +:100060007C0E00037C0E00FFFFCF5F010000000349 +:100070007C0E00037C0E00037C0E00037C0E00004F +:1000800001000000000000FFFFCF5F02000000033E +:100090007C0E00037C0E00037C0E00037C0E00FF30 +:1000A000FFCF5F02000000037C0E00037C0E000304 +:1000B0007C0E00037C0E00FFFFCF5F0200000003F8 +:1000C0007C0E00037C0E00037C0E00037C0E00FF00 +:1000D000FFCF5F02000000037C0E00037C0E0003D4 +:0700E0007C0E00037C0E0002 :00000001FF -- cgit v0.10.2 From b5f18a201ed82ed3776c9950646689b93713ae57 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 16 Mar 2011 14:57:23 -0700 Subject: isci: exposing user parameters via module params Exposing the user config parameters through the kernel module parameters. The kernel module params will have the default values set and we will no longer pulling the default values for user params from the core. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index b0edd84..cd31cba 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -2548,41 +2548,46 @@ enum sci_status scic_user_parameters_set( struct scic_sds_controller *scic, union scic_user_parameters *scic_parms) { - if ( - (scic->parent.state_machine.current_state_id - == SCI_BASE_CONTROLLER_STATE_RESET) - || (scic->parent.state_machine.current_state_id - == SCI_BASE_CONTROLLER_STATE_INITIALIZING) - || (scic->parent.state_machine.current_state_id - == SCI_BASE_CONTROLLER_STATE_INITIALIZED) - ) { + u32 state = scic->parent.state_machine.current_state_id; + + if (state == SCI_BASE_CONTROLLER_STATE_RESET || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { u16 index; /* * Validate the user parameters. If they are not legal, then - * return a failure. */ + * return a failure. + */ for (index = 0; index < SCI_MAX_PHYS; index++) { - if (!(scic_parms->sds1.phys[index].max_speed_generation - <= SCIC_SDS_PARM_MAX_SPEED - && scic_parms->sds1.phys[index].max_speed_generation - > SCIC_SDS_PARM_NO_SPEED)) + struct sci_phy_user_params *user_phy; + + user_phy = &scic_parms->sds1.phys[index]; + + if (!((user_phy->max_speed_generation <= + SCIC_SDS_PARM_MAX_SPEED) && + (user_phy->max_speed_generation > + SCIC_SDS_PARM_NO_SPEED))) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - if (scic_parms->sds1.phys[index].in_connection_align_insertion_frequency < 3) + if (user_phy->in_connection_align_insertion_frequency < + 3) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - if ( - (scic_parms->sds1.phys[index].in_connection_align_insertion_frequency < 3) || - (scic_parms->sds1.phys[index].align_insertion_frequency == 0) || - (scic_parms->sds1.phys[index].notify_enable_spin_up_insertion_frequency == 0) - ) + + if ((user_phy->in_connection_align_insertion_frequency < + 3) || + (user_phy->align_insertion_frequency == 0) || + (user_phy-> + notify_enable_spin_up_insertion_frequency == + 0)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; } if ((scic_parms->sds1.stp_inactivity_timeout == 0) || - (scic_parms->sds1.ssp_inactivity_timeout == 0) || - (scic_parms->sds1.stp_max_occupancy_timeout == 0) || - (scic_parms->sds1.ssp_max_occupancy_timeout == 0) || - (scic_parms->sds1.no_outbound_task_timeout == 0)) + (scic_parms->sds1.ssp_inactivity_timeout == 0) || + (scic_parms->sds1.stp_max_occupancy_timeout == 0) || + (scic_parms->sds1.ssp_max_occupancy_timeout == 0) || + (scic_parms->sds1.no_outbound_task_timeout == 0)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms)); @@ -2620,36 +2625,34 @@ enum sci_status scic_oem_parameters_set( * Validate the oem parameters. If they are not legal, then * return a failure. */ for (index = 0; index < SCI_MAX_PORTS; index++) { - if (scic_parms->sds1.ports[index].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) { + if (scic_parms->sds1.ports[index].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } } for (index = 0; index < SCI_MAX_PHYS; index++) { - if ( - scic_parms->sds1.phys[index].sas_address.high == 0 - && scic_parms->sds1.phys[index].sas_address.low == 0 - ) { + if ((scic_parms->sds1.phys[index].sas_address.high == 0) && + (scic_parms->sds1.phys[index].sas_address.low == 0)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } } - if (scic_parms->sds1.controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { + if (scic_parms->sds1.controller.mode_type == + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { for (index = 0; index < SCI_MAX_PHYS; index++) { if (scic_parms->sds1.ports[index].phy_mask != 0) return SCI_FAILURE_INVALID_PARAMETER_VALUE; } - } else if (scic_parms->sds1.controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + } else if (scic_parms->sds1.controller.mode_type == + SCIC_PORT_MANUAL_CONFIGURATION_MODE) { for (index = 0; index < SCI_MAX_PHYS; index++) combined_phy_mask |= scic_parms->sds1.ports[index].phy_mask; if (combined_phy_mask == 0) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } else { + } else return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } - if (scic_parms->sds1.controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + if (scic_parms->sds1.controller.max_concurrent_dev_spin_up > + MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) return SCI_FAILURE_INVALID_PARAMETER_VALUE; scic->oem_parameters.sds1 = scic_parms->sds1; diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index d6e2a73..79515be 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -413,6 +413,32 @@ static void __iomem *smu_base(struct isci_host *isci_host) return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id; } +static void isci_user_parameters_get( + struct isci_host *isci_host, + union scic_user_parameters *scic_user_params) +{ + struct scic_sds_user_parameters *u = &scic_user_params->sds1; + int i; + + for (i = 0; i < SCI_MAX_PHYS; i++) { + struct sci_phy_user_params *u_phy = &u->phys[i]; + + u_phy->max_speed_generation = phy_gen; + + /* we are not exporting these for now */ + u_phy->align_insertion_frequency = 0x7f; + u_phy->in_connection_align_insertion_frequency = 0xff; + u_phy->notify_enable_spin_up_insertion_frequency = 0x33; + } + + u->stp_inactivity_timeout = stp_inactive_to; + u->ssp_inactivity_timeout = ssp_inactive_to; + u->stp_max_occupancy_timeout = stp_max_occ_to; + u->ssp_max_occupancy_timeout = ssp_max_occ_to; + u->no_outbound_task_timeout = no_outbound_task_to; + u->max_number_concurrent_device_spin_up = max_concurr_spinup; +} + int isci_host_init(struct isci_host *isci_host) { int err = 0, i; @@ -462,7 +488,7 @@ int isci_host_init(struct isci_host *isci_host) * grab initial values stored in the controller object for OEM and USER * parameters */ - scic_user_parameters_get(controller, &scic_user_params); + isci_user_parameters_get(isci_host, &scic_user_params); status = scic_user_parameters_set(isci_host->core_controller, &scic_user_params); if (status != SCI_SUCCESS) { diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 51a7bce..1b04b9c 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -110,9 +110,37 @@ int isci_si_rev = ISCI_SI_REVA2; #else int isci_si_rev = ISCI_SI_REVB0; #endif -module_param(isci_si_rev, int, S_IRUGO | S_IWUSR); +module_param(isci_si_rev, int, 0); MODULE_PARM_DESC(isci_si_rev, "override default si rev (0: A0 1: A2 2: B0)"); +unsigned char no_outbound_task_to = 20; +module_param(no_outbound_task_to, byte, 0); +MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)"); + +u16 ssp_max_occ_to = 20; +module_param(ssp_max_occ_to, ushort, 0); +MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)"); + +u16 stp_max_occ_to = 5; +module_param(stp_max_occ_to, ushort, 0); +MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)"); + +u16 ssp_inactive_to = 5; +module_param(ssp_inactive_to, ushort, 0); +MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)"); + +u16 stp_inactive_to = 5; +module_param(stp_inactive_to, ushort, 0); +MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)"); + +unsigned char phy_gen = 3; +module_param(phy_gen, byte, 0); +MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)"); + +unsigned char max_concurr_spinup = 1; +module_param(max_concurr_spinup, byte, 0); +MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); + static struct scsi_host_template isci_sht = { .module = THIS_MODULE, diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 83422d4..a2df59c 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -75,6 +75,14 @@ #include "task.h" #include "sata.h" +extern unsigned char no_outbound_task_to; +extern u16 ssp_max_occ_to; +extern u16 stp_max_occ_to; +extern u16 ssp_inactive_to; +extern u16 stp_inactive_to; +extern unsigned char phy_gen; +extern unsigned char max_concurr_spinup; + irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); irqreturn_t isci_error_isr(int vec, void *data); -- cgit v0.10.2 From 4eefd2518aa04e1c69118252dc23e3444e694bc1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 25 Mar 2011 09:58:15 -0700 Subject: isci: fix apc mode definition The original apc mode definition is the correct one, the fix from commit 4711ba10 "isci: fix oem parameter initialization and mode detection" was based on a typo from a specification update. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 1b44483..c2162cf 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -96,10 +96,6 @@ struct isci_oem_hdr { #define ISCI_ROM_SIG "ISCUOEMB" #define ISCI_ROM_SIG_SIZE 8 -#define ISCI_PREBOOT_SOURCE_INIT (0x00) -#define ISCI_PREBOOT_SOURCE_OROM (0x80) -#define ISCI_PREBOOT_SOURCE_EFI (0x81) - #define ISCI_EFI_VENDOR_GUID \ EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \ 0x1a, 0x04, 0xc6) @@ -116,8 +112,8 @@ struct isci_oem_hdr { * being assigned is sufficient to declare manual PORT configuration. */ enum SCIC_PORT_CONFIGURATION_MODE { - SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 0, - SCIC_PORT_MANUAL_CONFIGURATION_MODE = 1 + SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0, + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1 }; struct sci_bios_oem_param_block_hdr { diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex index 4f8767c..31b5ecf 100644 --- a/firmware/isci/isci_firmware.bin.ihex +++ b/firmware/isci/isci_firmware.bin.ihex @@ -1,11 +1,11 @@ :10000000495343554F454D42E70017100002000089 -:10001000000000000000000001000000000000FFE0 +:10001000000000000000000101000000000000FFDF :10002000FFCF5F01000000037C0E00037C0E000385 :100030007C0E00037C0E00FFFFCF5F010000000379 :100040007C0E00037C0E00037C0E00037C0E00FF80 :10005000FFCF5F01000000037C0E00037C0E000355 :100060007C0E00037C0E00FFFFCF5F010000000349 -:100070007C0E00037C0E00037C0E00037C0E00004F +:100070007C0E00037C0E00037C0E00037C0E00014E :1000800001000000000000FFFFCF5F02000000033E :100090007C0E00037C0E00037C0E00037C0E00FF30 :1000A000FFCF5F02000000037C0E00037C0E000304 -- cgit v0.10.2 From 52ae18ac80fbdd268720b0daa27ac797a801500c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 25 Mar 2011 10:05:58 -0700 Subject: isci: fix a build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use min_t to address: drivers/scsi/isci/probe_roms.c: In function ‘isci_get_efi_var’: drivers/scsi/isci/probe_roms.c:241: warning: comparison of distinct pointer types lacks a cast Reported-by: David Milburn Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 1697487..2df8d8e 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -250,9 +250,8 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) return NULL; } - copy_len = min(evar->DataSize, - min(oem_hdr->len - sizeof(*oem_hdr), - sizeof(*rom))); + copy_len = min_t(u16, evar->DataSize, + min_t(u16, oem_hdr->len - sizeof(*oem_hdr), sizeof(*rom))); memcpy(rom, (char *)evar->Data + sizeof(*oem_hdr), copy_len); -- cgit v0.10.2 From 09d7da135b34bc74a7996b5db373521557ddf3d4 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Sat, 26 Mar 2011 16:11:51 -0700 Subject: isci: Remove event_* calls as they are just wrappers Removed isci_event_* calls and call those functions directly. Reported-by: Christoph Hellwig Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 1252d768..a65c0ae 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -9,7 +9,7 @@ EXTRA_CFLAGS += -Idrivers/scsi/isci/core/ -Idrivers/scsi/isci/ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ remote_device.o port.o timers.o \ - host.o task.o events.o probe_roms.o \ + host.o task.o probe_roms.o \ core/scic_sds_controller.o \ core/scic_sds_remote_device.o \ core/scic_sds_request.o \ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index cd31cba..eaaa4cc 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -253,19 +253,19 @@ static void scic_sds_controller_phy_startup_timeout_handler( * This method initializes the phy startup operations for controller start. */ enum sci_status scic_sds_controller_initialize_phy_startup( - struct scic_sds_controller *this_controller) + struct scic_sds_controller *scic) { - this_controller->phy_startup_timer = isci_event_timer_create( - this_controller, - scic_sds_controller_phy_startup_timeout_handler, - this_controller - ); + struct isci_host *ihost = sci_object_get_association(scic); - if (this_controller->phy_startup_timer == NULL) { + scic->phy_startup_timer = isci_timer_create(ihost, + scic, + scic_sds_controller_phy_startup_timeout_handler); + + if (scic->phy_startup_timer == NULL) return SCI_FAILURE_INSUFFICIENT_RESOURCES; - } else { - this_controller->next_phy_to_start = 0; - this_controller->phy_startup_timer_pending = false; + else { + scic->next_phy_to_start = 0; + scic->phy_startup_timer_pending = false; } return SCI_SUCCESS; @@ -278,22 +278,20 @@ enum sci_status scic_sds_controller_initialize_phy_startup( * object. */ void scic_sds_controller_initialize_power_control( - struct scic_sds_controller *this_controller) + struct scic_sds_controller *scic) { - this_controller->power_control.timer = isci_event_timer_create( - this_controller, - scic_sds_controller_power_control_timer_handler, - this_controller - ); + struct isci_host *ihost = sci_object_get_association(scic); + scic->power_control.timer = isci_timer_create( + ihost, + scic, + scic_sds_controller_power_control_timer_handler); - memset( - this_controller->power_control.requesters, - 0, - sizeof(this_controller->power_control.requesters) - ); + memset(scic->power_control.requesters, + 0, + sizeof(scic->power_control.requesters)); - this_controller->power_control.phys_waiting = 0; - this_controller->power_control.phys_granted_power = 0; + scic->power_control.phys_waiting = 0; + scic->power_control.phys_granted_power = 0; } /* --------------------------------------------------------------------------- */ @@ -730,30 +728,29 @@ void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) * none. */ static void scic_sds_controller_transition_to_ready( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, enum sci_status status) { - if (this_controller->parent.state_machine.current_state_id - == SCI_BASE_CONTROLLER_STATE_STARTING) { + struct isci_host *ihost = sci_object_get_association(scic); + + if (scic->parent.state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_STARTING) { /* * We move into the ready state, because some of the phys/ports - * may be up and operational. */ + * may be up and operational. + */ sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(this_controller), - SCI_BASE_CONTROLLER_STATE_READY - ); + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_READY); - isci_event_controller_start_complete(this_controller, status); + isci_host_start_complete(ihost, status); } } -/** - * This method is the general timeout handler for the controller. It will take - * the correct timetout action based on the current controller state - */ -void scic_sds_controller_timeout_handler( - struct scic_sds_controller *scic) +void scic_sds_controller_timeout_handler(void *_scic) { + struct scic_sds_controller *scic = _scic; + struct isci_host *ihost = sci_object_get_association(scic); enum sci_base_controller_states current_state; current_state = sci_base_state_machine_get_state( @@ -766,7 +763,7 @@ void scic_sds_controller_timeout_handler( sci_base_state_machine_change_state( scic_sds_controller_get_base_state_machine(scic), SCI_BASE_CONTROLLER_STATE_FAILED); - isci_event_controller_stop_complete(scic, SCI_FAILURE_TIMEOUT); + isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); } else /* / @todo Now what do we want to do in this case? */ dev_err(scic_to_dev(scic), "%s: Controller timer fired when controller was not " @@ -803,37 +800,21 @@ enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) return status; } -/** - * - * - * - */ -static void scic_sds_controller_phy_timer_start( - struct scic_sds_controller *this_controller) +static inline void scic_sds_controller_phy_timer_start( + struct scic_sds_controller *scic) { - isci_event_timer_start( - this_controller, - this_controller->phy_startup_timer, - SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT - ); + isci_timer_start(scic->phy_startup_timer, + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); - this_controller->phy_startup_timer_pending = true; + scic->phy_startup_timer_pending = true; } -/** - * - * - * - */ -void scic_sds_controller_phy_timer_stop( - struct scic_sds_controller *this_controller) +inline void scic_sds_controller_phy_timer_stop( + struct scic_sds_controller *scic) { - isci_event_timer_stop( - this_controller, - this_controller->phy_startup_timer - ); + isci_timer_stop(scic->phy_startup_timer); - this_controller->phy_startup_timer_pending = false; + scic->phy_startup_timer_pending = false; } /** @@ -1009,19 +990,17 @@ enum sci_status scic_sds_controller_stop_devices( * ****************************************************************************- */ /** + * This function starts the power control timer for this controller object. * - * - * This method starts the power control timer for this controller object. + * @param scic */ -static void scic_sds_controller_power_control_timer_start( - struct scic_sds_controller *this_controller) +static inline void scic_sds_controller_power_control_timer_start( + struct scic_sds_controller *scic) { - isci_event_timer_start( - this_controller, this_controller->power_control.timer, - SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL - ); + isci_timer_start(scic->power_control.timer, + SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); - this_controller->power_control.timer_started = true; + scic->power_control.timer_started = true; } /** @@ -1029,20 +1008,22 @@ static void scic_sds_controller_power_control_timer_start( * * @param scic */ -void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic) +static inline void scic_sds_controller_power_control_timer_stop( + struct scic_sds_controller *scic) { if (scic->power_control.timer_started) { - isci_event_timer_stop(scic, scic->power_control.timer); + isci_timer_stop(scic->power_control.timer); scic->power_control.timer_started = false; } } /** - * This method stops and starts the power control timer for this controller object. + * This method stops and starts the power control timer for this controller + * object. * * @param scic */ -void scic_sds_controller_power_control_timer_restart( +static inline void scic_sds_controller_power_control_timer_restart( struct scic_sds_controller *scic) { scic_sds_controller_power_control_timer_stop(scic); @@ -2893,51 +2874,41 @@ static enum sci_status scic_sds_controller_general_reset_handler( * * RESET STATE HANDLERS * ***************************************************************************** */ -/** - * - * @controller: This is the struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * - * This method is the struct scic_sds_controller initialize handler for the reset - * state. - Currently this function does nothing enum sci_status SCI_FAILURE This - * function is not yet implemented and is a valid request from the reset state. - */ -static enum sci_status scic_sds_controller_reset_state_initialize_handler( - struct sci_base_controller *controller) +static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct sci_base_controller *base_scic) { - u32 index; enum sci_status result = SCI_SUCCESS; - struct scic_sds_controller *this_controller; + struct scic_sds_controller *scic; + struct isci_host *ihost; + u32 index; - this_controller = (struct scic_sds_controller *)controller; + scic = container_of(base_scic, typeof(*scic), parent); + ihost = sci_object_get_association(scic); sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(this_controller), - SCI_BASE_CONTROLLER_STATE_INITIALIZING - ); + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_INITIALIZING); - this_controller->timeout_timer = isci_event_timer_create( - this_controller, - (void (*)(void *))scic_sds_controller_timeout_handler, - (void (*)(void *))controller); + scic->timeout_timer = isci_timer_create(ihost, + scic, + scic_sds_controller_timeout_handler); - scic_sds_controller_initialize_phy_startup(this_controller); + scic_sds_controller_initialize_phy_startup(scic); - scic_sds_controller_initialize_power_control(this_controller); + scic_sds_controller_initialize_power_control(scic); /* * There is nothing to do here for B0 since we do not have to * program the AFE registers. * / @todo The AFE settings are supposed to be correct for the B0 but * / presently they seem to be wrong. */ - scic_sds_controller_afe_initialization(this_controller); + scic_sds_controller_afe_initialization(scic); - if (SCI_SUCCESS == result) { + if (result == SCI_SUCCESS) { u32 status; u32 terminate_loop; /* Take the hardware out of reset */ - SMU_SMUSRCR_WRITE(this_controller, 0x00000000); + SMU_SMUSRCR_WRITE(scic, 0x00000000); /* * / @todo Provide meaningfull error code for hardware failure @@ -2948,11 +2919,11 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler( while (terminate_loop-- && (result != SCI_SUCCESS)) { /* Loop until the hardware reports success */ udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); - status = SMU_SMUCSR_READ(this_controller); + status = SMU_SMUCSR_READ(scic); - if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) { + if ((status & SCU_RAM_INIT_COMPLETED) == + SCU_RAM_INIT_COMPLETED) result = SCI_SUCCESS; - } } } @@ -2965,39 +2936,42 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler( /* * Determine what are the actaul device capacities that the * hardware will support */ - device_context_capacity = SMU_DCC_READ(this_controller); + device_context_capacity = SMU_DCC_READ(scic); - max_supported_ports = - smu_dcc_get_max_ports(device_context_capacity); - max_supported_devices = - smu_dcc_get_max_remote_node_context(device_context_capacity); - max_supported_io_requests = - smu_dcc_get_max_task_context(device_context_capacity); + max_supported_ports = smu_dcc_get_max_ports(device_context_capacity); + max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity); + max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity); - /* Make all PEs that are unassigned match up with the logical ports */ + /* + * Make all PEs that are unassigned match up with the + * logical ports + */ for (index = 0; index < max_supported_ports; index++) { - scu_register_write( - this_controller, - this_controller->scu_registers->peg0.ptsg.protocol_engine[index], - index - ); + struct scu_port_task_scheduler_group_registers *ptsg = + &scic->scu_registers->peg0.ptsg; + + scu_register_write(scic, + ptsg->protocol_engine[index], + index); } /* Record the smaller of the two capacity values */ - this_controller->logical_port_entries = - min(max_supported_ports, this_controller->logical_port_entries); + scic->logical_port_entries = + min(max_supported_ports, scic->logical_port_entries); - this_controller->task_context_entries = - min(max_supported_io_requests, this_controller->task_context_entries); + scic->task_context_entries = + min(max_supported_io_requests, + scic->task_context_entries); - this_controller->remote_node_entries = - min(max_supported_devices, this_controller->remote_node_entries); + scic->remote_node_entries = + min(max_supported_devices, scic->remote_node_entries); /* * Now that we have the correct hardware reported minimum values * build the MDL for the controller. Default to a performance - * configuration. */ - scic_controller_set_mode(this_controller, SCI_MODE_SPEED); + * configuration. + */ + scic_controller_set_mode(scic, SCI_MODE_SPEED); } /* Initialize hardware PCI Relaxed ordering in DMA engines */ @@ -3005,66 +2979,62 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler( u32 dma_configuration; /* Configure the payload DMA */ - dma_configuration = SCU_PDMACR_READ(this_controller); - dma_configuration |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - SCU_PDMACR_WRITE(this_controller, dma_configuration); + dma_configuration = SCU_PDMACR_READ(scic); + dma_configuration |= + SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + SCU_PDMACR_WRITE(scic, dma_configuration); /* Configure the control DMA */ - dma_configuration = SCU_CDMACR_READ(this_controller); - dma_configuration |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - SCU_CDMACR_WRITE(this_controller, dma_configuration); + dma_configuration = SCU_CDMACR_READ(scic); + dma_configuration |= + SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + SCU_CDMACR_WRITE(scic, dma_configuration); } /* * Initialize the PHYs before the PORTs because the PHY registers - * are accessed during the port initialization. */ + * are accessed during the port initialization. + */ if (result == SCI_SUCCESS) { /* Initialize the phys */ for (index = 0; (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS); index++) { result = scic_sds_phy_initialize( - &this_controller->phy_table[index], - &this_controller->scu_registers->peg0.pe[index].tl, - &this_controller->scu_registers->peg0.pe[index].ll - ); + &scic->phy_table[index], + &scic->scu_registers->peg0.pe[index].tl, + &scic->scu_registers->peg0.pe[index].ll); } } if (result == SCI_SUCCESS) { /* Initialize the logical ports */ for (index = 0; - (index < this_controller->logical_port_entries) - && (result == SCI_SUCCESS); + (index < scic->logical_port_entries) && + (result == SCI_SUCCESS); index++) { result = scic_sds_port_initialize( - &this_controller->port_table[index], - &this_controller->scu_registers->peg0.ptsg.port[index], - &this_controller->scu_registers->peg0.ptsg.protocol_engine, - &this_controller->scu_registers->peg0.viit[index] - ); + &scic->port_table[index], + &scic->scu_registers->peg0.ptsg.port[index], + &scic->scu_registers->peg0.ptsg.protocol_engine, + &scic->scu_registers->peg0.viit[index]); } } - if (SCI_SUCCESS == result) { + if (result == SCI_SUCCESS) result = scic_sds_port_configuration_agent_initialize( - this_controller, - &this_controller->port_agent - ); - } + scic, + &scic->port_agent); /* Advance the controller state machine */ - if (result == SCI_SUCCESS) { + if (result == SCI_SUCCESS) sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(this_controller), - SCI_BASE_CONTROLLER_STATE_INITIALIZED - ); - } else { + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_INITIALIZED); + else sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(this_controller), - SCI_BASE_CONTROLLER_STATE_FAILED - ); - } + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_FAILED); return result; } @@ -3076,13 +3046,14 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler( /** * - * @controller: This is the struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. + * @controller: This is the struct sci_base_controller object which is cast + * into a struct scic_sds_controller object. * @timeout: This is the allowed time for the controller object to reach the * started state. * - * This method is the struct scic_sds_controller start handler for the initialized - * state. - Validate we have a good memory descriptor table - Initialze the + * This function is the struct scic_sds_controller start handler for the + * initialized state. + * - Validate we have a good memory descriptor table - Initialze the * physical memory before programming the hardware - Program the SCU hardware * with the physical memory addresses passed in the memory descriptor table. - * Initialzie the TCi pool - Initialize the RNi pool - Initialize the @@ -3099,70 +3070,74 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( { u16 index; enum sci_status result; - struct scic_sds_controller *this_controller; + struct scic_sds_controller *scic; - this_controller = (struct scic_sds_controller *)controller; + scic = (struct scic_sds_controller *)controller; - /* Make sure that the SCI User filled in the memory descriptor table correctly */ - result = scic_sds_controller_validate_memory_descriptor_table(this_controller); + /* + * Make sure that the SCI User filled in the memory descriptor + * table correctly + */ + result = scic_sds_controller_validate_memory_descriptor_table(scic); if (result == SCI_SUCCESS) { - /* The memory descriptor list looks good so program the hardware */ - scic_sds_controller_ram_initialization(this_controller); + /* + * The memory descriptor list looks good so program the + * hardware + */ + scic_sds_controller_ram_initialization(scic); } if (result == SCI_SUCCESS) { /* Build the TCi free pool */ - sci_pool_initialize(this_controller->tci_pool); - for (index = 0; index < this_controller->task_context_entries; index++) { - sci_pool_put(this_controller->tci_pool, index); - } + sci_pool_initialize(scic->tci_pool); + for (index = 0; index < scic->task_context_entries; index++) + sci_pool_put(scic->tci_pool, index); /* Build the RNi free pool */ scic_sds_remote_node_table_initialize( - &this_controller->available_remote_nodes, - this_controller->remote_node_entries - ); + &scic->available_remote_nodes, + scic->remote_node_entries); } if (result == SCI_SUCCESS) { /* - * Before anything else lets make sure we will not be interrupted - * by the hardware. */ - scic_controller_disable_interrupts(this_controller); + * Before anything else lets make sure we will not be + * interrupted by the hardware. + */ + scic_controller_disable_interrupts(scic); /* Enable the port task scheduler */ - scic_sds_controller_enable_port_task_scheduler(this_controller); + scic_sds_controller_enable_port_task_scheduler(scic); - /* Assign all the task entries to this controller physical function */ - scic_sds_controller_assign_task_entries(this_controller); + /* Assign all the task entries to scic physical function */ + scic_sds_controller_assign_task_entries(scic); /* Now initialze the completion queue */ - scic_sds_controller_initialize_completion_queue(this_controller); + scic_sds_controller_initialize_completion_queue(scic); /* Initialize the unsolicited frame queue for use */ - scic_sds_controller_initialize_unsolicited_frame_queue(this_controller); + scic_sds_controller_initialize_unsolicited_frame_queue(scic); } /* Start all of the ports on this controller */ - for (index = 0; index < this_controller->logical_port_entries && - result == SCI_SUCCESS; index++) { - struct scic_sds_port *sci_port = &this_controller->port_table[index]; + for (index = 0; + (index < scic->logical_port_entries) && (result == SCI_SUCCESS); + index++) { + struct scic_sds_port *sci_port = &scic->port_table[index]; - result = sci_port->state_handlers->parent.start_handler(&sci_port->parent); + result = sci_port->state_handlers->parent.start_handler( + &sci_port->parent); } if (result == SCI_SUCCESS) { - scic_sds_controller_start_next_phy(this_controller); + scic_sds_controller_start_next_phy(scic); - isci_event_timer_start(this_controller, - this_controller->timeout_timer, - timeout); + isci_timer_start(scic->timeout_timer, timeout); sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(this_controller), - SCI_BASE_CONTROLLER_STATE_STARTING - ); + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_STARTING); } return result; @@ -3241,18 +3216,14 @@ static enum sci_status scic_sds_controller_ready_state_stop_handler( struct sci_base_controller *controller, u32 timeout) { - struct scic_sds_controller *this_controller; - - this_controller = (struct scic_sds_controller *)controller; + struct scic_sds_controller *scic = + (struct scic_sds_controller *)controller; - isci_event_timer_start(this_controller, - this_controller->timeout_timer, - timeout); + isci_timer_start(scic->timeout_timer, timeout); sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(this_controller), - SCI_BASE_CONTROLLER_STATE_STOPPING - ); + scic_sds_controller_get_base_state_machine(scic), + SCI_BASE_CONTROLLER_STATE_STOPPING); return SCI_SUCCESS; } @@ -3689,12 +3660,12 @@ static void scic_sds_controller_initial_state_enter( * from the SCI_BASE_CONTROLLER_STATE_STARTING. - This function stops the * controller starting timeout timer. none */ -static void scic_sds_controller_starting_state_exit( +static inline void scic_sds_controller_starting_state_exit( struct sci_base_object *object) { struct scic_sds_controller *scic = (struct scic_sds_controller *)object; - isci_event_timer_stop(scic, scic->timeout_timer); + isci_timer_stop(scic->timeout_timer); } /** @@ -3762,21 +3733,20 @@ static void scic_sds_controller_stopping_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller - * object. + * @object: This is the struct sci_base_object which is cast to a struct + * scic_sds_controller object. * - * This method implements the actions taken by the struct scic_sds_controller on exit - * from the SCI_BASE_CONTROLLER_STATE_STOPPING. - This function stops the - * controller stopping timeout timer. none + * This funciton implements the actions taken by the struct scic_sds_controller + * on exit from the SCI_BASE_CONTROLLER_STATE_STOPPING. - + * This function stops the controller stopping timeout timer. */ -static void scic_sds_controller_stopping_state_exit( +static inline void scic_sds_controller_stopping_state_exit( struct sci_base_object *object) { - struct scic_sds_controller *this_controller; - - this_controller = (struct scic_sds_controller *)object; + struct scic_sds_controller *scic = + (struct scic_sds_controller *)object; - isci_event_timer_stop(this_controller, this_controller->timeout_timer); + isci_timer_stop(scic->timeout_timer); } /** diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 6386a64..f426324 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -681,8 +681,7 @@ void scic_sds_controller_copy_task_context( struct scic_sds_controller *this_controller, struct scic_sds_request *this_request); -void scic_sds_controller_timeout_handler( - struct scic_sds_controller *controller); +void scic_sds_controller_timeout_handler(void *controller); void scic_sds_controller_initialize_power_control( struct scic_sds_controller *this_controller); diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 2717458..225e67a 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -366,18 +366,23 @@ void scic_sds_phy_set_port( */ enum sci_status scic_sds_phy_initialize( struct scic_sds_phy *sci_phy, - struct scu_transport_layer_registers __iomem *transport_layer_registers, - struct scu_link_layer_registers __iomem *link_layer_registers) + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers) { + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + struct isci_host *ihost = sci_object_get_association(scic); + /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = isci_event_timer_create( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_sata_timeout, - sci_phy - ); + sci_phy->sata_timeout_timer = + isci_timer_create( + ihost, + sci_phy, + scic_sds_phy_sata_timeout); /* Perfrom the initialization of the TL hardware */ - scic_sds_phy_transport_layer_initialization(sci_phy, transport_layer_registers); + scic_sds_phy_transport_layer_initialization( + sci_phy, + transport_layer_registers); /* Perofrm the initialization of the PE hardware */ scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); @@ -387,8 +392,7 @@ enum sci_status scic_sds_phy_initialize( * transition to the stopped state. */ sci_base_state_machine_change_state( scic_sds_phy_get_base_state_machine(sci_phy), - SCI_BASE_PHY_STATE_STOPPED - ); + SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } @@ -1742,49 +1746,42 @@ static void scic_sds_phy_starting_await_sata_power_substate_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_phy object. * - * This method will perform the actions required by the struct scic_sds_phy on + * This function will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ static void scic_sds_phy_starting_await_sata_phy_substate_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN - ); + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); - isci_event_timer_start( - scic_sds_phy_get_controller(this_phy), - this_phy->sata_timeout_timer, - SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT - ); + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_phy object. * - * This method will perform the actions required by the struct scic_sds_phy on exiting + * This method will perform the actions required by the struct scic_sds_phy + * on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer * that was started on entry to await sata phy event notification none */ -static void scic_sds_phy_starting_await_sata_phy_substate_exit( +static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; - this_phy = (struct scic_sds_phy *)object; - - isci_event_timer_stop( - scic_sds_phy_get_controller(this_phy), - this_phy->sata_timeout_timer - ); + isci_timer_stop(sci_phy->sata_timeout_timer); } /** @@ -1798,104 +1795,92 @@ static void scic_sds_phy_starting_await_sata_phy_substate_exit( static void scic_sds_phy_starting_await_sata_speed_substate_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN - ); + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - isci_event_timer_start( - scic_sds_phy_get_controller(this_phy), - this_phy->sata_timeout_timer, - SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT - ); + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_phy object. * - * This method will perform the actions required by the struct scic_sds_phy on exiting + * This function will perform the actions required by the + * struct scic_sds_phy on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer * that was started on entry to await sata phy event notification none */ -static void scic_sds_phy_starting_await_sata_speed_substate_exit( +static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; - this_phy = (struct scic_sds_phy *)object; - - isci_event_timer_stop( - scic_sds_phy_get_controller(this_phy), - this_phy->sata_timeout_timer - ); + isci_timer_stop(sci_phy->sata_timeout_timer); } /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_phy object. * - * This method will perform the actions required by the struct scic_sds_phy on + * This function will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the - * struct scic_sds_phy object state handlers for this state. - Start the SIGNATURE FIS + * struct scic_sds_phy object state handlers for this state. + * - Start the SIGNATURE FIS * timeout timer none */ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter( struct sci_base_object *object) { bool continue_to_ready_state; - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF - ); + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); continue_to_ready_state = scic_sds_port_link_detected( - this_phy->owning_port, - this_phy - ); + sci_phy->owning_port, + sci_phy); if (continue_to_ready_state) { /* - * Clear the PE suspend condition so we can actually receive SIG FIS - * The hardware will not respond to the XRDY until the PE suspend - * condition is cleared. */ - scic_sds_phy_resume(this_phy); + * Clear the PE suspend condition so we can actually + * receive SIG FIS + * The hardware will not respond to the XRDY until the PE + * suspend condition is cleared. + */ + scic_sds_phy_resume(sci_phy); - isci_event_timer_start( - scic_sds_phy_get_controller(this_phy), - this_phy->sata_timeout_timer, - SCIC_SDS_SIGNATURE_FIS_TIMEOUT - ); - } else { - this_phy->is_in_link_training = false; - } + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SIGNATURE_FIS_TIMEOUT); + } else + sci_phy->is_in_link_training = false; } /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_phy object. * - * This method will perform the actions required by the struct scic_sds_phy on exiting + * This function will perform the actions required by the + * struct scic_sds_phy on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE * FIS timeout timer. none */ -static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( +static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; - isci_event_timer_stop( - scic_sds_phy_get_controller(this_phy), - this_phy->sata_timeout_timer - ); + isci_timer_stop(sci_phy->sata_timeout_timer); } /** @@ -2158,27 +2143,30 @@ enum sci_status scic_sds_phy_default_consume_power_handler( /** * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. + * @phy: This is the struct sci_base_phy object which is cast into a + * struct scic_sds_phy object. * - * This method takes the struct scic_sds_phy from a stopped state and attempts to - * start it. - The phy state machine is transitioned to the + * This method takes the struct scic_sds_phy from a stopped state and + * attempts to start it. - The phy state machine is transitioned to the * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS */ -static enum sci_status scic_sds_phy_stopped_state_start_handler(struct sci_base_phy *phy) +static enum sci_status scic_sds_phy_stopped_state_start_handler( + struct sci_base_phy *phy) { - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)phy; + struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)phy; + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + struct isci_host *ihost = sci_object_get_association(scic); /* Create the SIGNATURE FIS Timeout timer for this phy */ - this_phy->sata_timeout_timer = isci_event_timer_create( - scic_sds_phy_get_controller(this_phy), - scic_sds_phy_sata_timeout, this_phy); + sci_phy->sata_timeout_timer = + isci_timer_create( + ihost, + sci_phy, + scic_sds_phy_sata_timeout); - if (this_phy->sata_timeout_timer != NULL) { + if (sci_phy->sata_timeout_timer != NULL) { sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), + scic_sds_phy_get_base_state_machine(sci_phy), SCI_BASE_PHY_STATE_STARTING); } @@ -2525,14 +2513,16 @@ static void scic_sds_phy_initial_state_enter( * @object: This is the struct sci_base_object which is cast to a * struct scic_sds_phy object. * - * This method will perform the actions required by the struct scic_sds_phy on + * This function will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state * handlers for the phy object base state machine initial state. - The SCU * hardware is requested to stop the protocol engine. none */ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) { - struct scic_sds_phy *sci_phy; + struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + struct isci_host *ihost = sci_object_get_association(scic); sci_phy = (struct scic_sds_phy *)object; @@ -2541,11 +2531,11 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) * reset state */ - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STOPPED); + scic_sds_phy_set_base_state_handlers(sci_phy, + SCI_BASE_PHY_STATE_STOPPED); if (sci_phy->sata_timeout_timer != NULL) { - isci_event_timer_destroy(scic_sds_phy_get_controller(sci_phy), - sci_phy->sata_timeout_timer); + isci_del_timer(ihost, sci_phy->sata_timeout_timer); sci_phy->sata_timeout_timer = NULL; } @@ -2554,9 +2544,10 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) if (sci_phy->parent.state_machine.previous_state_id != SCI_BASE_PHY_STATE_INITIAL) - scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy); + scic_sds_controller_link_down( + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy); } /** diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index a41fe42..3ae0f0d 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -738,34 +738,32 @@ void scic_sds_port_setup_transports( * @do_notify_user: This parameter specifies whether to inform the user (via * scic_cb_port_link_up()) as to the fact that a new phy as become ready. * - * This method will activate the phy in the port. Activation includes: - adding + * This function will activate the phy in the port. + * Activation includes: - adding * the phy to the port - enabling the Protocol Engine in the silicon. - * notifying the user that the link is up. none */ -void scic_sds_port_activate_phy( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy, - bool do_notify_user) +void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, + bool do_notify_user) { - struct scic_sds_controller *controller; + struct scic_sds_controller *scic = + scic_sds_port_get_controller(sci_port); struct sci_sas_identify_address_frame_protocols protocols; + struct isci_host *ihost = sci_object_get_association(scic); - controller = scic_sds_port_get_controller(this_port); - scic_sds_phy_get_attached_phy_protocols(the_phy, &protocols); + scic_sds_phy_get_attached_phy_protocols(sci_phy, &protocols); /* If this is sata port then the phy has already been resumed */ - if (!protocols.u.bits.stp_target) { - scic_sds_phy_resume(the_phy); - } + if (!protocols.u.bits.stp_target) + scic_sds_phy_resume(sci_phy); - this_port->active_phy_mask |= 1 << the_phy->phy_index; + sci_port->active_phy_mask |= 1 << sci_phy->phy_index; - scic_sds_controller_clear_invalid_phy(controller, the_phy); + scic_sds_controller_clear_invalid_phy(scic, sci_phy); if (do_notify_user == true) - isci_event_port_link_up(this_port->owning_controller, - this_port, - the_phy); + isci_port_link_up(ihost, sci_port, sci_phy); } /** @@ -773,27 +771,30 @@ void scic_sds_port_activate_phy( * @this_port: This is the port on which the phy should be deactivated. * @the_phy: This is the specific phy that is no longer active in the port. * @do_notify_user: This parameter specifies whether to inform the user (via - * isci_event_port_link_down()) as to the fact that a new phy as become + * isci_port_link_down()) as to the fact that a new phy as become * ready. * - * This method will deactivate the supplied phy in the port. none + * This function will deactivate the supplied phy in the port. none */ -void scic_sds_port_deactivate_phy( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy, - bool do_notify_user) +void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, + bool do_notify_user) { - this_port->active_phy_mask &= ~(1 << the_phy->phy_index); + struct scic_sds_controller *scic = + scic_sds_port_get_controller(sci_port); + struct isci_port *iport = sci_object_get_association(sci_port); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_phy *iphy = sci_object_get_association(sci_phy); + + sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); - the_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; + sci_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; /* Re-assign the phy back to the LP as if it were a narrow port */ - SCU_PCSPExCR_WRITE(this_port, the_phy->phy_index, the_phy->phy_index); + SCU_PCSPExCR_WRITE(sci_port, sci_phy->phy_index, sci_phy->phy_index); if (do_notify_user == true) - isci_event_port_link_down(this_port->owning_controller, - this_port, - the_phy); + isci_port_link_down(ihost, iphy, iport); } /** @@ -801,22 +802,24 @@ void scic_sds_port_deactivate_phy( * @this_port: This is the port on which the phy should be disabled. * @the_phy: This is the specific phy which to disabled. * - * This method will disable the phy and report that the phy is not valid for + * This function will disable the phy and report that the phy is not valid for * this port object. None */ static void scic_sds_port_invalid_link_up( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - struct scic_sds_controller *controller = scic_sds_port_get_controller(this_port); + struct scic_sds_controller *scic = + scic_sds_port_get_controller(sci_port); /* - * Check to see if we have alreay reported this link as bad and if not go - * ahead and tell the SCI_USER that we have discovered an invalid link. */ - if ((controller->invalid_phy_mask & (1 << the_phy->phy_index)) == 0) { - scic_sds_controller_set_invalid_phy(controller, the_phy); - - isci_event_port_invalid_link_up(controller, this_port, the_phy); + * Check to see if we have alreay reported this link as bad and if + * not go ahead and tell the SCI_USER that we have discovered an + * invalid link. + */ + if ((scic->invalid_phy_mask & (1 << sci_phy->phy_index)) == 0) { + scic_sds_controller_set_invalid_phy(scic, sci_phy); + isci_port_invalid_link_up(scic, sci_port, sci_phy); } } @@ -950,44 +953,48 @@ enum sci_status scic_sds_port_complete_io( */ static void scic_sds_port_timeout_handler(void *port) { - struct scic_sds_port *this_port = port; + struct scic_sds_port *sci_port = port; u32 current_state; current_state = sci_base_state_machine_get_state( - &this_port->parent.state_machine); + &sci_port->parent.state_machine); if (current_state == SCI_BASE_PORT_STATE_RESETTING) { /* - * if the port is still in the resetting state then the timeout fired - * before the reset completed. */ + * if the port is still in the resetting state then the + * timeout fired before the reset completed. + */ sci_base_state_machine_change_state( - &this_port->parent.state_machine, - SCI_BASE_PORT_STATE_FAILED - ); + &sci_port->parent.state_machine, + SCI_BASE_PORT_STATE_FAILED); } else if (current_state == SCI_BASE_PORT_STATE_STOPPED) { /* * if the port is stopped then the start request failed - * In this case stay in the stopped state. */ - dev_err(sciport_to_dev(this_port), + * In this case stay in the stopped state. + */ + dev_err(sciport_to_dev(sci_port), "%s: SCIC Port 0x%p failed to stop before tiemout.\n", __func__, - this_port); + sci_port); } else if (current_state == SCI_BASE_PORT_STATE_STOPPING) { - /* if the port is still stopping then the stop has not completed */ - isci_event_port_stop_complete( - scic_sds_port_get_controller(this_port), - port, - SCI_FAILURE_TIMEOUT - ); + /* + * if the port is still stopping then the stop has not + * completed + */ + isci_port_stop_complete( + scic_sds_port_get_controller(sci_port), + sci_port, + SCI_FAILURE_TIMEOUT); } else { /* - * The port is in the ready state and we have a timer reporting a timeout - * this should not happen. */ - dev_err(sciport_to_dev(this_port), + * The port is in the ready state and we have a timer + * reporting a timeout this should not happen. + */ + dev_err(sciport_to_dev(sci_port), "%s: SCIC Port 0x%p is processing a timeout operation " "in state %d.\n", __func__, - this_port, + sci_port, current_state); } } @@ -1067,13 +1074,14 @@ enum sci_sas_link_rate scic_sds_port_get_max_allowed_speed( * */ void scic_sds_port_broadcast_change_received( - struct scic_sds_port *this_port, - struct scic_sds_phy *this_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = sci_object_get_association(scic); + /* notify the user. */ - isci_event_port_bc_change_primitive_received( - this_port->owning_controller, this_port, this_phy - ); + isci_port_bc_change_received(ihost, sci_port, sci_phy); } @@ -1267,30 +1275,29 @@ static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler( * * This method will casue the port to reset. enum sci_status SCI_SUCCESS */ -static enum sci_status scic_sds_port_ready_operational_substate_reset_handler( - struct sci_base_port *port, - u32 timeout) +static enum +sci_status scic_sds_port_ready_operational_substate_reset_handler( + struct sci_base_port *port, + u32 timeout) { enum sci_status status = SCI_FAILURE_INVALID_PHY; u32 phy_index; - struct scic_sds_port *this_port = (struct scic_sds_port *)port; + struct scic_sds_port *sci_port = (struct scic_sds_port *)port; struct scic_sds_phy *selected_phy = NULL; /* Select a phy on which we can send the hard reset request. */ - for ( - phy_index = 0; - (phy_index < SCI_MAX_PHYS) - && (selected_phy == NULL); - phy_index++ - ) { - selected_phy = this_port->phy_table[phy_index]; - - if ( - (selected_phy != NULL) - && !scic_sds_port_active_phy(this_port, selected_phy) - ) { - /* We found a phy but it is not ready select different phy */ + for (phy_index = 0; + (phy_index < SCI_MAX_PHYS) && (selected_phy == NULL); + phy_index++) { + selected_phy = sci_port->phy_table[phy_index]; + + if ((selected_phy != NULL) && + !scic_sds_port_active_phy(sci_port, selected_phy)) { + /* + * We found a phy but it is not ready select + * different phy + */ selected_phy = NULL; } } @@ -1300,18 +1307,13 @@ static enum sci_status scic_sds_port_ready_operational_substate_reset_handler( status = scic_sds_phy_reset(selected_phy); if (status == SCI_SUCCESS) { - isci_event_timer_start( - scic_sds_port_get_controller(this_port), - this_port->timer_handle, - timeout - ); - - this_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; + isci_timer_start(sci_port->timer_handle, timeout); + sci_port->not_ready_reason = + SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; sci_base_state_machine_change_state( - &this_port->parent.state_machine, - SCI_BASE_PORT_STATE_RESETTING - ); + &sci_port->parent.state_machine, + SCI_BASE_PORT_STATE_RESETTING); } } @@ -1686,10 +1688,11 @@ static void scic_sds_port_ready_substate_waiting_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_port object. * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets + * This function will perform the actions required by the struct scic_sds_port + * on entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets * the state handlers for the port object, notifies the SCI User that the port * is ready, and resumes port operations. none */ @@ -1697,32 +1700,34 @@ static void scic_sds_port_ready_substate_operational_enter( struct sci_base_object *object) { u32 index; - struct scic_sds_port *this_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_controller *scic = + scic_sds_port_get_controller(sci_port); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_port *iport = sci_object_get_association(sci_port); scic_sds_port_set_ready_state_handlers( - this_port, SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL - ); + sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); - isci_event_port_ready( - scic_sds_port_get_controller(this_port), this_port - ); + isci_port_ready(ihost, iport); for (index = 0; index < SCI_MAX_PHYS; index++) { - if (this_port->phy_table[index] != NULL) { + if (sci_port->phy_table[index] != NULL) scic_sds_port_write_phy_assignment( - this_port, this_port->phy_table[index] - ); - } + sci_port, + sci_port->phy_table[index]); } - scic_sds_port_update_viit_entry(this_port); + scic_sds_port_update_viit_entry(sci_port); - scic_sds_port_resume_port_task_scheduler(this_port); + scic_sds_port_resume_port_task_scheduler(sci_port); - /* Post the dummy task for the port so the hardware can schedule + /* + * Post the dummy task for the port so the hardware can schedule * io correctly */ - scic_sds_port_post_dummy_request(this_port); + scic_sds_port_post_dummy_request(sci_port); } /** @@ -1736,20 +1741,20 @@ static void scic_sds_port_ready_substate_operational_enter( static void scic_sds_port_ready_substate_operational_exit( struct sci_base_object *object) { - struct scic_sds_port *this_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_controller *scic = + scic_sds_port_get_controller(sci_port); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_port *iport = sci_object_get_association(sci_port); -/* - * Kill the dummy task for this port if it has not yet posted - * the hardware will treat this as a NOP and just return abort - * complete. - */ - scic_sds_port_abort_dummy_request(this_port); + /* + * Kill the dummy task for this port if it has not yet posted + * the hardware will treat this as a NOP and just return abort + * complete. + */ + scic_sds_port_abort_dummy_request(sci_port); - isci_event_port_not_ready( - scic_sds_port_get_controller(this_port), - this_port, - this_port->not_ready_reason - ); + isci_port_not_ready(ihost, iport); } /* @@ -1759,7 +1764,8 @@ static void scic_sds_port_ready_substate_operational_exit( /** * scic_sds_port_ready_substate_configuring_enter() - - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports @@ -1768,29 +1774,26 @@ static void scic_sds_port_ready_substate_operational_exit( static void scic_sds_port_ready_substate_configuring_enter( struct sci_base_object *object) { - struct scic_sds_port *this_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_controller *scic = + scic_sds_port_get_controller(sci_port); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_port *iport = sci_object_get_association(sci_port); scic_sds_port_set_ready_state_handlers( - this_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); + sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); - if (this_port->active_phy_mask == 0) { - isci_event_port_not_ready( - scic_sds_port_get_controller(this_port), - this_port, - SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS - ); + if (sci_port->active_phy_mask == 0) { + isci_port_not_ready(ihost, iport); sci_base_state_machine_change_state( - &this_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING - ); - } else if (this_port->started_request_count == 0) { + &sci_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + } else if (sci_port->started_request_count == 0) sci_base_state_machine_change_state( - &this_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL - ); - } + &sci_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); } static void scic_sds_port_ready_substate_configuring_exit( @@ -2165,42 +2168,52 @@ static enum sci_status scic_sds_port_general_complete_io_handler( /** * scic_sds_port_stopped_state_start_handler() - stop a port from "started" * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. + * @port: This is the struct sci_base_port object which is cast into a + * struct scic_sds_port object. * - * This method takes the struct scic_sds_port from a stopped state and attempts to - * start it. To start a port it must have no assiged devices and it must have - * at least one phy assigned to it. If those conditions are met then the port - * can transition to the ready state. enum sci_status - * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This struct scic_sds_port object could - * not be started because the port configuration is not valid. SCI_SUCCESS the - * start request is successful and the struct scic_sds_port object has transitioned to - * the SCI_BASE_PORT_STATE_READY. + * This function takes the struct scic_sds_port from a stopped state and + * attempts to start it. To start a port it must have no assiged devices and + * it must have at least one phy assigned to it. If those conditions are + * met then the port can transition to the ready state. + * enum sci_status + * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION + * This struct scic_sds_port object could not be started because the port + * configuration is not valid. + * SCI_SUCCESS + * the start request is successful and the struct scic_sds_port object + * has transitioned to the SCI_BASE_PORT_STATE_READY. */ -static enum sci_status scic_sds_port_stopped_state_start_handler(struct sci_base_port *base_port) +static enum sci_status +scic_sds_port_stopped_state_start_handler(struct sci_base_port *base_port) { - struct scic_sds_port *sci_port = container_of(base_port, typeof(*sci_port), parent); + struct scic_sds_port *sci_port = + container_of(base_port, typeof(*sci_port), parent); struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = sci_object_get_association(scic); enum sci_status status = SCI_SUCCESS; u32 phy_mask; if (sci_port->assigned_device_count > 0) { /* - * / @todo This is a start failure operation because there are still - * / devices assigned to this port. There must be no devices - * / assigned to a port on a start operation. */ + * @todo This is a start failure operation because + * there are still devices assigned to this port. + * There must be no devices assigned to a port on a + * start operation. + */ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; } - sci_port->timer_handle = isci_event_timer_create(scic, - scic_sds_port_timeout_handler, - sci_port); + sci_port->timer_handle = + isci_timer_create(ihost, + sci_port, + scic_sds_port_timeout_handler); if (!sci_port->timer_handle) return SCI_FAILURE_INSUFFICIENT_RESOURCES; if (sci_port->reserved_rni == SCU_DUMMY_INDEX) { - u16 rni = scic_sds_remote_node_table_allocate_remote_node(&scic->available_remote_nodes, 1); + u16 rni = scic_sds_remote_node_table_allocate_remote_node( + &scic->available_remote_nodes, 1); if (rni != SCU_DUMMY_INDEX) scic_sds_port_construct_dummy_rnc(sci_port, rni); @@ -2715,50 +2728,41 @@ static void scic_sds_port_stopped_state_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state - * handlers for the struct scic_sds_port object, reports the port object as not ready - * and starts the ready substate machine. none + * handlers for the struct scic_sds_port object, reports the port object as + * not ready and starts the ready substate machine. none */ -static void scic_sds_port_ready_state_enter( - struct sci_base_object *object) +static void scic_sds_port_ready_state_enter(struct sci_base_object *object) { - struct scic_sds_port *this_port; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct isci_port *iport = sci_object_get_association(sci_port); + struct scic_sds_controller *scic = + scic_sds_port_get_controller(sci_port); + struct isci_host *ihost = sci_object_get_association(scic); - this_port = (struct scic_sds_port *)object; + /* + * Put the ready state handlers in place though they will not be + * there long + */ + scic_sds_port_set_base_state_handlers(sci_port, + SCI_BASE_PORT_STATE_READY); - /* Put the ready state handlers in place though they will not be there long */ - scic_sds_port_set_base_state_handlers( - this_port, SCI_BASE_PORT_STATE_READY - ); - - if ( - SCI_BASE_PORT_STATE_RESETTING - == this_port->parent.state_machine.previous_state_id - ) { - isci_event_port_hard_reset_complete( - scic_sds_port_get_controller(this_port), - this_port, - SCI_SUCCESS - ); - } else { - /* Notify the caller that the port is not yet ready */ - isci_event_port_not_ready( - scic_sds_port_get_controller(this_port), - this_port, - SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS - ); - } + if (sci_port->parent.state_machine.previous_state_id == + SCI_BASE_PORT_STATE_RESETTING) + isci_port_hard_reset_complete(iport, SCI_SUCCESS); + else /* Notify the caller that the port is not yet ready */ + isci_port_not_ready(ihost, iport); /* Post and suspend the dummy remote node context for this port. */ - scic_sds_port_post_dummy_remote_node(this_port); + scic_sds_port_post_dummy_remote_node(sci_port); /* Start the ready substate machine */ sci_base_state_machine_start( - scic_sds_port_get_ready_substate_machine(this_port) - ); + scic_sds_port_get_ready_substate_machine(sci_port)); } /** @@ -2802,22 +2806,19 @@ static void scic_sds_port_resetting_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_port object. * - * This method will perform the actions required by the struct scic_sds_port on + * This function will perform the actions required by the + * struct scic_sds_port on * exiting the SCI_BASE_STATE_RESETTING. This function does nothing. none */ -static void scic_sds_port_resetting_state_exit( +static inline void scic_sds_port_resetting_state_exit( struct sci_base_object *object) { - struct scic_sds_port *this_port; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; - this_port = (struct scic_sds_port *)object; - - isci_event_timer_stop( - scic_sds_port_get_controller(this_port), - this_port->timer_handle - ); + isci_timer_stop(sci_port->timer_handle); } /** @@ -2842,51 +2843,42 @@ static void scic_sds_port_stopping_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_port object. * - * This method will perform the actions required by the struct scic_sds_port on + * This function will perform the actions required by the + * struct scic_sds_port on * exiting the SCI_BASE_STATE_STOPPING. This function does nothing. none */ -static void scic_sds_port_stopping_state_exit( - struct sci_base_object *object) +static inline void +scic_sds_port_stopping_state_exit(struct sci_base_object *object) { - struct scic_sds_port *this_port; - - this_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; - isci_event_timer_stop( - scic_sds_port_get_controller(this_port), - this_port->timer_handle - ); + isci_timer_stop(sci_port->timer_handle); - scic_sds_port_destroy_dummy_resources(this_port); + scic_sds_port_destroy_dummy_resources(sci_port); } /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the struct sci_base_object which is cast to a + * struct scic_sds_port object. * - * This method will perform the actions required by the struct scic_sds_port on + * This function will perform the actions required by the + * struct scic_sds_port on * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping * state handlers for the struct scic_sds_port object. none */ -static void scic_sds_port_failed_state_enter( - struct sci_base_object *object) +static void scic_sds_port_failed_state_enter(struct sci_base_object *object) { - struct scic_sds_port *this_port; - - this_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct isci_port *iport = sci_object_get_association(sci_port); - scic_sds_port_set_base_state_handlers( - this_port, - SCI_BASE_PORT_STATE_FAILED - ); + scic_sds_port_set_base_state_handlers(sci_port, + SCI_BASE_PORT_STATE_FAILED); - isci_event_port_hard_reset_complete( - scic_sds_port_get_controller(this_port), - this_port, - SCI_FAILURE_TIMEOUT - ); + isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); } /* --------------------------------------------------------------------------- */ diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 7c95210..d2d3f52 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -431,46 +431,47 @@ static void scic_sds_mpc_agent_link_up( * assigned port. * @phy: This is the phy object which has gone link down. * - * This method handles the manual port configuration link down notifications. + * This function handles the manual port configuration link down notifications. * Since all ports and phys are associated at initialization time we just turn * around and notifiy the port object of the link down event. If this PHY is * not associated with a port there is no action taken. Is it possible to get a * link down notification from a phy that has no assocoated port? */ static void scic_sds_mpc_agent_link_down( - struct scic_sds_controller *controller, + struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *port, - struct scic_sds_phy *phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - if (port != NULL) { + if (sci_port != NULL) { /* - * If we can form a new port from the remainder of the phys then we want - * to start the timer to allow the SCI User to cleanup old devices and - * rediscover the port before rebuilding the port with the phys that - * remain in the ready state. */ - port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy)); - port_agent->phy_configured_mask &= ~(1 << scic_sds_phy_get_index(phy)); + * If we can form a new port from the remainder of the phys + * then we want to start the timer to allow the SCI User to + * cleanup old devices and rediscover the port before + * rebuilding the port with the phys that remain in the ready + * state. + */ + port_agent->phy_ready_mask &= + ~(1 << scic_sds_phy_get_index(sci_phy)); + port_agent->phy_configured_mask &= + ~(1 << scic_sds_phy_get_index(sci_phy)); /* - * Check to see if there are more phys waiting to be configured into a port. - * If there are allow the SCI User to tear down this port, if necessary, and - * then reconstruc the port after the timeout. */ - if ( - (port_agent->phy_configured_mask == 0x0000) - && (port_agent->phy_ready_mask != 0x0000) - && !port_agent->timer_pending - ) { + * Check to see if there are more phys waiting to be + * configured into a port. If there are allow the SCI User + * to tear down this port, if necessary, and then reconstruct + * the port after the timeout. + */ + if ((port_agent->phy_configured_mask == 0x0000) && + (port_agent->phy_ready_mask != 0x0000) && + !port_agent->timer_pending) { port_agent->timer_pending = true; - isci_event_timer_start( - controller, - port_agent->timer, - SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT - ); + isci_timer_start(port_agent->timer, + SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); } - scic_sds_port_link_down(port, phy); + scic_sds_port_link_down(sci_port, sci_phy); } } @@ -535,19 +536,18 @@ static enum sci_status scic_sds_apc_agent_validate_phy_configuration( * the next time period. This could be caused by either a link down event or a * link up event where we can not yet tell to which port a phy belongs. */ -static void scic_sds_apc_agent_start_timer( - struct scic_sds_controller *controller, +static inline void scic_sds_apc_agent_start_timer( + struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_phy *phy, + struct scic_sds_phy *sci_phy, u32 timeout) { - if (port_agent->timer_pending) { - isci_event_timer_stop(controller, port_agent->timer); - } + if (port_agent->timer_pending) + isci_timer_stop(port_agent->timer); port_agent->timer_pending = true; - isci_event_timer_start(controller, port_agent->timer, timeout); + isci_timer_start(port_agent->timer, timeout); } /** @@ -816,45 +816,46 @@ void scic_sds_port_configuration_agent_construct( * This method will construct the port configuration agent for this controller. */ enum sci_status scic_sds_port_configuration_agent_initialize( - struct scic_sds_controller *controller, + struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent) { enum sci_status status = SCI_SUCCESS; enum SCIC_PORT_CONFIGURATION_MODE mode; + struct isci_host *ihost = sci_object_get_association(scic); - mode = controller->oem_parameters.sds1.controller.mode_type; + mode = scic->oem_parameters.sds1.controller.mode_type; if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - status = scic_sds_mpc_agent_validate_phy_configuration(controller, port_agent); + status = scic_sds_mpc_agent_validate_phy_configuration( + scic, port_agent); port_agent->link_up_handler = scic_sds_mpc_agent_link_up; port_agent->link_down_handler = scic_sds_mpc_agent_link_down; - port_agent->timer = isci_event_timer_create( - controller, - scic_sds_mpc_agent_timeout_handler, - controller - ); + port_agent->timer = isci_timer_create( + ihost, + scic, + scic_sds_mpc_agent_timeout_handler); } else { - status = scic_sds_apc_agent_validate_phy_configuration(controller, port_agent); + status = scic_sds_apc_agent_validate_phy_configuration( + scic, port_agent); port_agent->link_up_handler = scic_sds_apc_agent_link_up; port_agent->link_down_handler = scic_sds_apc_agent_link_down; - port_agent->timer = isci_event_timer_create( - controller, - scic_sds_apc_agent_timeout_handler, - controller - ); + port_agent->timer = isci_timer_create( + ihost, + scic, + scic_sds_apc_agent_timeout_handler); } /* Make sure we have actually gotten a timer */ if ((status == SCI_SUCCESS) && (port_agent->timer == NULL)) { - dev_err(scic_to_dev(controller), + dev_err(scic_to_dev(scic), "%s: Controller 0x%p automatic port configuration " "agent could not get timer.\n", __func__, - controller); + scic); status = SCI_FAILURE; } diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 0ac6ca0..f722678 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1795,7 +1795,7 @@ static void scic_sds_remote_device_initial_state_enter( * @object: This is the struct sci_base_object that is cast into a * struct scic_sds_remote_device. * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it + * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it * sets the stopped state handlers and if this state is entered from the * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING then the SCI User is informed that the * device stop is complete. none @@ -1803,30 +1803,29 @@ static void scic_sds_remote_device_initial_state_enter( static void scic_sds_remote_device_stopped_state_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)object; + struct scic_sds_controller *scic = + scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = + sci_object_get_association(sci_dev); - SET_STATE_HANDLER( - this_device, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED - ); + SET_STATE_HANDLER(sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); /* * If we are entering from the stopping state let the SCI User know that - * the stop operation has completed. */ - if (this_device->parent.state_machine.previous_state_id - == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) { - isci_event_remote_device_stop_complete( - scic_sds_remote_device_get_controller(this_device), - this_device, - SCI_SUCCESS - ); - } + * the stop operation has completed. + */ + if (sci_dev->parent.state_machine.previous_state_id == + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) + isci_remote_device_stop_complete(ihost, idev, SCI_SUCCESS); scic_sds_controller_remote_device_stopped( - scic_sds_remote_device_get_controller(this_device), - this_device - ); + scic_sds_remote_device_get_controller(sci_dev), + sci_dev); } /** @@ -1834,29 +1833,28 @@ static void scic_sds_remote_device_stopped_state_enter( * @object: This is the struct sci_base_object that is cast into a * struct scic_sds_remote_device. * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it + * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it * sets the starting state handlers, sets the device not ready, and posts the * remote node context to the hardware. none */ static void scic_sds_remote_device_starting_state_enter( struct sci_base_object *object) { - struct scic_sds_controller *the_controller; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_controller *scic; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)object; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); - the_controller = scic_sds_remote_device_get_controller(this_device); + scic = scic_sds_remote_device_get_controller(sci_dev); SET_STATE_HANDLER( - this_device, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STARTING - ); + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STARTING); - isci_event_remote_device_not_ready( - the_controller, - this_device, - SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED - ); + isci_remote_device_not_ready( + idev, + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); } /** @@ -1864,27 +1862,29 @@ static void scic_sds_remote_device_starting_state_enter( * @object: This is the struct sci_base_object that is cast into a * struct scic_sds_remote_device. * - * This is the exit method for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it + * This is the exit function for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it * reports that the device start is complete. none */ static void scic_sds_remote_device_starting_state_exit( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)object; + struct scic_sds_controller *scic = + scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + /* - * / @todo Check the device object for the proper return code for this - * / callback */ - isci_event_remote_device_start_complete( - scic_sds_remote_device_get_controller(this_device), - this_device, - SCI_SUCCESS - ); + * @todo Check the device object for the proper return code for this + * callback + */ + isci_remote_device_start_complete(ihost, idev, SCI_SUCCESS); scic_sds_controller_remote_device_started( - scic_sds_remote_device_get_controller(this_device), - this_device - ); + scic_sds_remote_device_get_controller(sci_dev), + sci_dev); } /** @@ -1892,30 +1892,28 @@ static void scic_sds_remote_device_starting_state_exit( * @object: This is the struct sci_base_object that is cast into a * struct scic_sds_remote_device. * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_READY it sets + * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it sets * the ready state handlers, and starts the ready substate machine. none */ static void scic_sds_remote_device_ready_state_enter( struct sci_base_object *object) { - struct scic_sds_controller *the_controller; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; - - the_controller = scic_sds_remote_device_get_controller(this_device); + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)object; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct scic_sds_controller *scic + = scic_sds_remote_device_get_controller(sci_dev); - SET_STATE_HANDLER( - this_device, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_READY - ); + SET_STATE_HANDLER(sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_READY); - the_controller->remote_device_sequence[this_device->rnc->remote_node_index]++; + scic->remote_device_sequence[sci_dev->rnc->remote_node_index]++; - if (this_device->has_ready_substate_machine) { - sci_base_state_machine_start(&this_device->ready_substate_machine); - } else { - isci_event_remote_device_ready(the_controller, this_device); - } + if (sci_dev->has_ready_substate_machine) + sci_base_state_machine_start(&sci_dev->ready_substate_machine); + else + isci_remote_device_ready(idev); } /** @@ -1923,26 +1921,22 @@ static void scic_sds_remote_device_ready_state_enter( * @object: This is the struct sci_base_object that is cast into a * struct scic_sds_remote_device. * - * This is the exit method for the SCI_BASE_REMOTE_DEVICE_STATE_READY it does + * This is the exit function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it does * nothing. none */ static void scic_sds_remote_device_ready_state_exit( struct sci_base_object *object) { - struct scic_sds_controller *the_controller; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)object; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); - the_controller = scic_sds_remote_device_get_controller(this_device); - - if (this_device->has_ready_substate_machine) { - sci_base_state_machine_stop(&this_device->ready_substate_machine); - } else { - isci_event_remote_device_not_ready( - the_controller, - this_device, - SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED - ); - } + if (sci_dev->has_ready_substate_machine) + sci_base_state_machine_stop(&sci_dev->ready_substate_machine); + else + isci_remote_device_not_ready( + idev, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); } /** diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 00bebb9..4542f4e 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -2077,30 +2077,24 @@ static void scic_sds_request_started_state_exit( static void scic_sds_request_completed_state_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_controller *scic = + scic_sds_request_get_controller(sci_req); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_request *ireq = sci_object_get_association(sci_req); - SET_STATE_HANDLER( - this_request, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + + SET_STATE_HANDLER(sci_req, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_COMPLETED); /* Tell the SCI_USER that the IO request is complete */ - if (this_request->is_task_management_request == false) { - isci_event_io_request_complete( - scic_sds_request_get_controller(this_request), - scic_sds_request_get_device(this_request), - this_request, - this_request->sci_status - ); - } else { - isci_event_task_request_complete( - scic_sds_request_get_controller(this_request), - scic_sds_request_get_device(this_request), - this_request, - this_request->sci_status - ); - } + if (sci_req->is_task_management_request == false) + isci_request_io_request_complete(ihost, + ireq, + sci_req->sci_status); + else + isci_task_request_complete(ihost, ireq, sci_req->sci_status); } /** diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index 93e6ab8..fb832ef 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -250,22 +250,23 @@ const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_rea * struct scic_sds_remote_device. * * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE enter method. - * This method sets the ready cmd substate handlers and reports the device as + * This function sets the ready cmd substate handlers and reports the device as * ready. none */ -static void scic_sds_smp_remote_device_ready_idle_substate_enter( +static inline void scic_sds_smp_remote_device_ready_idle_substate_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)object; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + SET_STATE_HANDLER( - this_device, - scic_sds_smp_remote_device_ready_substate_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE - ); + sci_dev, + scic_sds_smp_remote_device_ready_substate_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - isci_event_remote_device_ready( - scic_sds_remote_device_get_controller(this_device), this_device); + isci_remote_device_ready(idev); } /** @@ -274,27 +275,26 @@ static void scic_sds_smp_remote_device_ready_idle_substate_enter( * struct scic_sds_remote_device. * * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD enter method. This - * method sets the remote device objects ready cmd substate handlers, and + * function sets the remote device objects ready cmd substate handlers, and * notify core user that the device is not ready. none */ static void scic_sds_smp_remote_device_ready_cmd_substate_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)object; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); - BUG_ON(this_device->working_request == NULL); + BUG_ON(sci_dev->working_request == NULL); SET_STATE_HANDLER( - this_device, - scic_sds_smp_remote_device_ready_substate_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD - ); + sci_dev, + scic_sds_smp_remote_device_ready_substate_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - isci_event_remote_device_not_ready( - scic_sds_remote_device_get_controller(this_device), - this_device, - SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED - ); + isci_remote_device_not_ready( + idev, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } /** diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index 9a615f0..cb396d1 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -677,23 +677,22 @@ const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_rea * * STP REMOTE DEVICE READY SUBSTATE PRIVATE METHODS * ***************************************************************************** */ -static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( - void *user_cookie) +static inline void +scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( + void *user_cookie) { - struct scic_sds_remote_device *this_device; - - this_device = (struct scic_sds_remote_device *)user_cookie; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)user_cookie; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); /* * For NCQ operation we do not issue a * scic_cb_remote_device_not_ready(). As a result, avoid sending - * the ready notification. */ - if (this_device->ready_substate_machine.previous_state_id - != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) { - isci_event_remote_device_ready( - scic_sds_remote_device_get_controller(this_device), this_device - ); - } + * the ready notification. + */ + if (sci_dev->ready_substate_machine.previous_state_id != + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) + isci_remote_device_ready(idev); } /* @@ -749,26 +748,23 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter( * struct scic_sds_remote_device object. * */ -static void scic_sds_stp_remote_device_ready_cmd_substate_enter( +static inline void scic_sds_stp_remote_device_ready_cmd_substate_enter( struct sci_base_object *device) { - struct scic_sds_remote_device *this_device; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)device; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); - this_device = (struct scic_sds_remote_device *)device; - - BUG_ON(this_device->working_request == NULL); + BUG_ON(sci_dev->working_request == NULL); SET_STATE_HANDLER( - this_device, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD - ); + sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - isci_event_remote_device_not_ready( - scic_sds_remote_device_get_controller(this_device), - this_device, - SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED - ); + isci_remote_device_not_ready( + idev, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } /* @@ -807,27 +803,21 @@ static void scic_sds_stp_remote_device_ready_ncq_substate_enter( * struct scic_sds_remote_device object. * */ -static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( +static inline void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( struct sci_base_object *device) { - struct scic_sds_remote_device *this_device; - - this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_remote_device *sci_dev = + (struct scic_sds_remote_device *)device; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); SET_STATE_HANDLER( - this_device, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR - ); + sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); - if (this_device->not_ready_reason == - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) { - isci_event_remote_device_not_ready( - scic_sds_remote_device_get_controller(this_device), - this_device, - this_device->not_ready_reason - ); - } + if (sci_dev->not_ready_reason == + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) + isci_remote_device_not_ready(idev, sci_dev->not_ready_reason); } /* diff --git a/drivers/scsi/isci/events.c b/drivers/scsi/isci/events.c deleted file mode 100644 index 9d58e45..0000000 --- a/drivers/scsi/isci/events.c +++ /dev/null @@ -1,609 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -/** - * This file contains isci module object implementation. - * - * - */ - -#include "isci.h" -#include "request.h" -#include "sata.h" -#include "task.h" -#include "events.h" - -/** - * isci_event_timer_create() - This callback method asks the user to create a - * timer and provide a handle for this timer for use in further timer - * interactions. The appropriate isci timer object function is called to - * create a timer object. - * @timer_callback: This parameter specifies the callback method to be invoked - * whenever the timer expires. - * @controller: This parameter specifies the controller with which this timer - * is to be associated. - * @cb_param: opaque callback parameter - * - * This method returns a handle to a timer object created by the user. The - * handle will be utilized for all further interactions relating to this timer. - */ -void *isci_event_timer_create(struct scic_sds_controller *scic, - void (*timer_callback)(void *), - void *cb_param) -{ - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_timer *itimer; - - itimer = isci_timer_create(ihost, cb_param, timer_callback); - - dev_dbg(&ihost->pdev->dev, "%s: timer = %p\n", __func__, itimer); - - return itimer; -} - - -/** - * isci_event_timer_start() - This callback method asks the user to start the - * supplied timer. The appropriate isci timer object function is called to - * start the timer. - * @controller: This parameter specifies the controller with which this timer - * is to associated. - * @timer: This parameter specifies the timer to be started. - * @milliseconds: This parameter specifies the number of milliseconds for which - * to stall. The operating system driver is allowed to round this value up - * where necessary. - * - */ -void isci_event_timer_start( - struct scic_sds_controller *controller, - void *timer, - u32 milliseconds) -{ - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_host = %p, timer = %p, milliseconds = %d\n", - __func__, isci_host, timer, milliseconds); - - isci_timer_start((struct isci_timer *)timer, milliseconds); - -} - -/** - * isci_event_timer_stop() - This callback method asks the user to stop the - * supplied timer. The appropriate isci timer object function is called to - * stop the timer. - * @controller: This parameter specifies the controller with which this timer - * is to associated. - * @timer: This parameter specifies the timer to be stopped. - * - */ -void isci_event_timer_stop(struct scic_sds_controller *controller, void *timer) -{ - struct isci_host *isci_host = sci_object_get_association(controller); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_host = %p, timer = %p\n", - __func__, isci_host, timer); - - isci_timer_stop((struct isci_timer *)timer); -} - -void isci_event_timer_destroy(struct scic_sds_controller *scic, void *timer) -{ - struct isci_host *ihost = sci_object_get_association(scic); - - dev_dbg(&ihost->pdev->dev, "%s: ihost = %p, timer = %p\n", - __func__, ihost, timer); - - isci_del_timer(ihost, timer); -} - -/** - * isci_event_controller_start_complete() - This user callback will inform the - * user that the controller has finished the start process. The associated - * isci host adapter's start_complete function is called. - * @controller: This parameter specifies the controller that was started. - * @completion_status: This parameter specifies the results of the start - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void isci_event_controller_start_complete( - struct scic_sds_controller *controller, - enum sci_status completion_status) -{ - struct isci_host *isci_host = - (struct isci_host *)sci_object_get_association(controller); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_host = %p\n", __func__, isci_host); - - isci_host_start_complete(isci_host, completion_status); -} - -/** - * isci_event_controller_stop_complete() - This user callback will inform the user - * that the controller has finished the stop process. The associated isci - * host adapter's start_complete function is called. - * @controller: This parameter specifies the controller that was stopped. - * @completion_status: This parameter specifies the results of the stop - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void isci_event_controller_stop_complete( - struct scic_sds_controller *controller, - enum sci_status completion_status) -{ - struct isci_host *isci_host = - (struct isci_host *)sci_object_get_association(controller); - - dev_dbg(&isci_host->pdev->dev, - "%s: status = 0x%x\n", __func__, completion_status); - isci_host_stop_complete(isci_host, completion_status); -} - -/** - * isci_event_io_request_complete() - This user callback will inform the user that - * an IO request has completed. - * @controller: This parameter specifies the controller on which the IO is - * completing. - * @remote_device: This parameter specifies the remote device on which this IO - * request is completing. - * @io_request: This parameter specifies the IO request that has completed. - * @completion_status: This parameter specifies the results of the IO request - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void isci_event_io_request_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *scic_io_request, - enum sci_io_status completion_status) -{ - struct isci_request *request; - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - request = - (struct isci_request *)sci_object_get_association( - scic_io_request - ); - - isci_request_io_request_complete(isci_host, - request, - completion_status); -} - -/** - * isci_event_task_request_complete() - This user callback will inform the user - * that a task management request completed. - * @controller: This parameter specifies the controller on which the task - * management request is completing. - * @remote_device: This parameter specifies the remote device on which this - * task management request is completing. - * @task_request: This parameter specifies the task management request that has - * completed. - * @completion_status: This parameter specifies the results of the IO request - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void isci_event_task_request_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *scic_task_request, - enum sci_task_status completion_status) -{ - struct isci_request *request; - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - request = - (struct isci_request *)sci_object_get_association( - scic_task_request); - - isci_task_request_complete(isci_host, request, completion_status); -} - -/** - * isci_event_port_stop_complete() - This method informs the user when a stop - * operation on the port has completed. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @completion_status: This parameter specifies the status for the operation - * being completed. - * - */ -void isci_event_port_stop_complete( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - enum sci_status completion_status) -{ - struct isci_host *isci_host; - - isci_host = (struct isci_host *)sci_object_get_association(controller); - - dev_notice(&isci_host->pdev->dev, "Port stop complete\n"); -} - -/** - * isci_event_port_hard_reset_complete() - This method informs the user when a - * hard reset on the port has completed. This hard reset could have been - * initiated by the user or by the remote port. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @completion_status: This parameter specifies the status for the operation - * being completed. - * - */ -void isci_event_port_hard_reset_complete( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - enum sci_status completion_status) -{ - struct isci_port *isci_port - = (struct isci_port *)sci_object_get_association(port); - - isci_port_hard_reset_complete(isci_port, completion_status); -} - -/** - * isci_event_port_ready() - This method informs the user that the port is now in - * a ready state and can be utilized to issue IOs. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * - */ -void isci_event_port_ready( - struct scic_sds_controller *controller, - struct scic_sds_port *port) -{ - struct isci_port *isci_port; - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - isci_port = - (struct isci_port *)sci_object_get_association(port); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_port = %p\n", __func__, isci_port); - - isci_port_ready(isci_host, isci_port); -} - -/** - * isci_event_port_not_ready() - This method informs the user that the port is now - * not in a ready (i.e. busy) state and can't be utilized to issue IOs. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * - */ -void isci_event_port_not_ready( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - u32 reason_code) -{ - struct isci_port *isci_port; - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - isci_port = - (struct isci_port *)sci_object_get_association(port); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_port = %p\n", __func__, isci_port); - - isci_port_not_ready(isci_host, isci_port); -} - -/** - * isci_event_port_invalid_link_up() - This method informs the SCI Core user that - * a phy/link became ready, but the phy is not allowed in the port. In some - * situations the underlying hardware only allows for certain phy to port - * mappings. If these mappings are violated, then this API is invoked. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @phy: This parameter specifies the phy that came ready, but the phy can't be - * a valid member of the port. - * - */ -void isci_event_port_invalid_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - struct isci_host *isci_host; - - isci_host = (struct isci_host *)sci_object_get_association(controller); - dev_warn(&isci_host->pdev->dev, "Invalid link up!\n"); -} - -/** - * isci_event_port_bc_change_primitive_received() - This callback method informs - * the user that a broadcast change primitive was received. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. For instances where the phy on which the primitive was - * received is not part of a port, this parameter will be NULL. - * @phy: This parameter specifies the phy on which the primitive was received. - * - */ -void isci_event_port_bc_change_primitive_received( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - dev_dbg(&isci_host->pdev->dev, - "%s: port = %p, phy = %p\n", __func__, port, phy); - isci_port_bc_change_received(isci_host, port, phy); -} - - - - -/** - * isci_event_port_link_up() - This callback method informs the user that a phy - * has become operational and is capable of communicating with the remote - * end point. - * @controller: This parameter represents the controller associated with the - * phy. - * @port: This parameter specifies the port object for which the user callback - * is being invoked. There may be conditions where this parameter can be - * NULL - * @phy: This parameter specifies the phy object for which the user callback is - * being invoked. - * - * none. - */ -void isci_event_port_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - dev_dbg(&isci_host->pdev->dev, - "%s: phy = %p\n", __func__, phy); - - isci_port_link_up(isci_host, port, phy); -} - -/** - * isci_event_port_link_down() - This callback method informs the user that a phy - * is no longer operational and is not capable of communicating with the - * remote end point. - * @controller: This parameter represents the controller associated with the - * phy. - * @port: This parameter specifies the port object for which the user callback - * is being invoked. There may be conditions where this parameter can be - * NULL - * @phy: This parameter specifies the phy object for which the user callback is - * being invoked. - * - * none. - */ -void isci_event_port_link_down( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - struct isci_host *isci_host; - struct isci_phy *isci_phy; - struct isci_port *isci_port; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - isci_phy = - (struct isci_phy *)sci_object_get_association(phy); - - isci_port = - (struct isci_port *)sci_object_get_association(port); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_port = %p\n", __func__, isci_port); - - isci_port_link_down(isci_host, isci_phy, isci_port); -} - -/** - * isci_event_remote_device_start_complete() - This user callback method will - * inform the user that a start operation has completed. - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the completion callback. - * @completion_status: This parameter specifies the completion status for the - * operation. - * - */ -void isci_event_remote_device_start_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - enum sci_status completion_status) -{ - struct isci_host *isci_host; - struct isci_remote_device *isci_device; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - isci_device = - (struct isci_remote_device *)sci_object_get_association( - remote_device - ); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); - - isci_remote_device_start_complete( - isci_host, isci_device, completion_status); - -} - -/** - * isci_event_remote_device_stop_complete() - This user callback method will - * inform the user that a stop operation has completed. - * @scic: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the completion callback. - * @completion_status: This parameter specifies the completion status for the - * operation. - * - */ -void isci_event_remote_device_stop_complete(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - enum sci_status completion_status) -{ - struct isci_host *ihost; - struct isci_remote_device *idev; - - ihost = sci_object_get_association(scic); - idev = sci_object_get_association(sci_dev); - - dev_dbg(&ihost->pdev->dev, - "%s: idev = %p\n", __func__, idev); - - isci_remote_device_stop_complete(ihost, idev, completion_status); -} - -/** - * isci_event_remote_device_ready() - This user callback method will inform the - * user that a remote device is now capable of handling IO requests. - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the callback. - * - */ -void isci_event_remote_device_ready( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device) -{ - struct isci_remote_device *isci_device = - (struct isci_remote_device *) - sci_object_get_association(remote_device); - - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); - - isci_remote_device_ready(isci_device); -} - -/** - * isci_event_remote_device_not_ready() - This user callback method will inform - * the user that a remote device is no longer capable of handling IO - * requests (until a ready callback is invoked). - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the callback. - * @reason_code: This parameter specifies the reason for the remote device - * going to a not ready state. - * - */ -void isci_event_remote_device_not_ready( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - u32 reason_code) -{ - struct isci_remote_device *isci_device = - (struct isci_remote_device *) - sci_object_get_association(remote_device); - - struct isci_host *isci_host; - - isci_host = - (struct isci_host *)sci_object_get_association(controller); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p, reason_code = %x\n", - __func__, isci_device, reason_code); - - isci_remote_device_not_ready(isci_device, reason_code); -} - - diff --git a/drivers/scsi/isci/events.h b/drivers/scsi/isci/events.h deleted file mode 100644 index fa2f6aa..0000000 --- a/drivers/scsi/isci/events.h +++ /dev/null @@ -1,373 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _ISCI_EVENT_H_ -#define _ISCI_EVENT_H_ - -/** - * isci_event_timer_create() - This callback method asks the user to create a - * timer and provide a handle for this timer for use in further timer - * interactions. - * @controller: This parameter specifies the controller with which this timer - * is to be associated. - * @timer_callback: This parameter specifies the callback method to be invoked - * whenever the timer expires. - * @cookie: This parameter specifies a piece of information that the user must - * retain. This cookie is to be supplied by the user anytime a timeout - * occurs for the created timer. - * - * The "timer_callback" method should be executed in a mutually exlusive manner - * from the controller completion handler handler. This method returns a handle - * to a timer object created by the user. The handle will be utilized for all - * further interactions relating to this timer. - */ -void *isci_event_timer_create( - struct scic_sds_controller *controller, - void (*timer_callback)(void *), - void *cookie); - -/** - * isci_event_timer_start() - This callback method asks the user to start the - * supplied timer. - * @controller: This parameter specifies the controller with which this timer - * is to associated. - * @timer: This parameter specifies the timer to be started. - * @milliseconds: This parameter specifies the number of milliseconds for which - * to stall. The operating system driver is allowed to round this value up - * where necessary. - * - * All timers in the system started by the SCI Core are one shot timers. - * Therefore, the SCI user should make sure that it removes the timer from it's - * list when a timer actually fires. Additionally, SCI Core user's should be - * able to handle calls from the SCI Core to stop a timer that may already be - * stopped. none - */ -void isci_event_timer_start( - struct scic_sds_controller *controller, - void *timer, - u32 milliseconds); - -/** - * isci_event_timer_stop() - This callback method asks the user to stop the - * supplied timer. - * @controller: This parameter specifies the controller with which this timer - * is to associated. - * @timer: This parameter specifies the timer to be stopped. - * - */ -void isci_event_timer_stop( - struct scic_sds_controller *controller, - void *timer); - - -void isci_event_timer_destroy(struct scic_sds_controller *scic, void *timer); - -/** - * isci_event_controller_start_complete() - This user callback will inform the - * user that the controller has finished the start process. - * @controller: This parameter specifies the controller that was started. - * @completion_status: This parameter specifies the results of the start - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void isci_event_controller_start_complete( - struct scic_sds_controller *controller, - enum sci_status completion_status); - -/** - * isci_event_controller_stop_complete() - This user callback will inform the - * user that the controller has finished the stop process. - * @controller: This parameter specifies the controller that was stopped. - * @completion_status: This parameter specifies the results of the stop - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void isci_event_controller_stop_complete( - struct scic_sds_controller *controller, - enum sci_status completion_status); - -/** - * isci_event_io_request_complete() - This user callback will inform the user - * that an IO request has completed. - * @controller: This parameter specifies the controller on which the IO is - * completing. - * @remote_device: This parameter specifies the remote device on which this IO - * request is completing. - * @io_request: This parameter specifies the IO request that has completed. - * @completion_status: This parameter specifies the results of the IO request - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void isci_event_io_request_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *scic_io_request, - enum sci_io_status completion_status); - -/** - * isci_event_task_request_complete() - This user callback will inform the user - * that a task management request completed. - * @controller: This parameter specifies the controller on which the task - * management request is completing. - * @remote_device: This parameter specifies the remote device on which this - * task management request is completing. - * @task_request: This parameter specifies the task management request that has - * completed. - * @completion_status: This parameter specifies the results of the IO request - * operation. SCI_SUCCESS indicates successful completion. - * - */ -void isci_event_task_request_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *scic_task_request, - enum sci_task_status completion_status); - -/** - * isci_event_port_stop_complete() - This method informs the user when a stop - * operation on the port has completed. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @completion_status: This parameter specifies the status for the operation - * being completed. - * - */ -void isci_event_port_stop_complete( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - enum sci_status completion_status); - -/** - * isci_event_port_hard_reset_complete() - This method informs the user when a - * hard reset on the port has completed. This hard reset could have been - * initiated by the user or by the remote port. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @completion_status: This parameter specifies the status for the operation - * being completed. - * - */ -void isci_event_port_hard_reset_complete( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - enum sci_status completion_status); - -/** - * isci_event_port_ready() - This method informs the user that the port is now - * in a ready state and can be utilized to issue IOs. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * - */ -void isci_event_port_ready( - struct scic_sds_controller *controller, - struct scic_sds_port *port); - -/** - * isci_event_port_not_ready() - This method informs the user that the port is - * now not in a ready (i.e. busy) state and can't be utilized to issue IOs. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @reason_code: This parameter specifies the reason for the port not ready - * callback. - * - */ -void isci_event_port_not_ready( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - u32 reason_code); - -/** - * isci_event_port_invalid_link_up() - This method informs the SCI Core user - * that a phy/link became ready, but the phy is not allowed in the port. In - * some situations the underlying hardware only allows for certain phy to port - * mappings. If these mappings are violated, then this API is invoked. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @phy: This parameter specifies the phy that came ready, but the phy can't be - * a valid member of the port. - * - */ -void isci_event_port_invalid_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy); - -/** - * isci_event_port_bc_change_primitive_received() - This callback method informs - * the user that a broadcast change primitive was received. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. For instances where the phy on which the primitive was - * received is not part of a port, this parameter will be - * NULL. - * @phy: This parameter specifies the phy on which the primitive was received. - * - */ -void isci_event_port_bc_change_primitive_received( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy); - -/** - * isci_event_port_link_up() - This callback method informs the user that a phy - * has become operational and is capable of communicating with the remote - * end point. - * @controller: This parameter represents the controller associated with the - * phy. - * @port: This parameter specifies the port object for which the user callback - * is being invoked. There may be conditions where this parameter can be - * NULL - * @phy: This parameter specifies the phy object for which the user callback is - * being invoked. - * - */ -void isci_event_port_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy); - -/** - * isci_event_port_link_down() - This callback method informs the user that a - * phy is no longer operational and is not capable of communicating with the - * remote end point. - * @controller: This parameter represents the controller associated with the - * phy. - * @port: This parameter specifies the port object for which the user callback - * is being invoked. There may be conditions where this parameter can be - * NULL - * @phy: This parameter specifies the phy object for which the user callback is - * being invoked. - * - */ -void isci_event_port_link_down( - struct scic_sds_controller *controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy); - -/** - * isci_event_remote_device_start_complete() - This user callback method will - * inform the user that a start operation has completed. - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the completion callback. - * @completion_status: This parameter specifies the completion status for the - * operation. - * - */ -void isci_event_remote_device_start_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - enum sci_status completion_status); - -/** - * isci_event_remote_device_stop_complete() - This user callback method will - * inform the user that a stop operation has completed. - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the completion callback. - * @completion_status: This parameter specifies the completion status for the - * operation. - * - */ -void isci_event_remote_device_stop_complete( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - enum sci_status completion_status); - -/** - * isci_event_remote_device_ready() - This user callback method will inform the - * user that a remote device is now capable of handling IO requests. - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the callback. - * - */ -void isci_event_remote_device_ready( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device); - -/** - * isci_event_remote_device_not_ready() - This user callback method will inform - * the user that a remote device is no longer capable of handling IO - * requests (until a ready callback is invoked). - * @controller: This parameter specifies the core controller associated with - * the completion callback. - * @remote_device: This parameter specifies the remote device associated with - * the callback. - * @reason_code: This paramete specifies the reason the remote device is not - * ready. - * - */ -void isci_event_remote_device_not_ready( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - u32 reason_code); - -#endif diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index a2df59c..8764385 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -71,7 +71,6 @@ #include "timers.h" #include "sci_status.h" #include "request.h" -#include "events.h" #include "task.h" #include "sata.h" diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index a5b2565..666076a 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -279,10 +279,8 @@ void isci_port_link_up( * @port: This parameter specifies the isci port with the active link. * */ -void isci_port_link_down( - struct isci_host *isci_host, - struct isci_phy *isci_phy, - struct isci_port *isci_port) +void isci_port_link_down(struct isci_host *isci_host, struct isci_phy *isci_phy, + struct isci_port *isci_port) { struct isci_remote_device *isci_device; @@ -358,9 +356,7 @@ void isci_port_formed( * @port: This parameter specifies the sci port with the active link. * */ -void isci_port_ready( - struct isci_host *isci_host, - struct isci_port *isci_port) +void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port) { dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p\n", __func__, isci_port); @@ -378,9 +374,7 @@ void isci_port_ready( * @port: This parameter specifies the sci port with the active link. * */ -void isci_port_not_ready( - struct isci_host *isci_host, - struct isci_port *isci_port) +void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port) { dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p\n", __func__, isci_port); @@ -394,9 +388,8 @@ void isci_port_not_ready( * process. * */ -void isci_port_hard_reset_complete( - struct isci_port *isci_port, - enum sci_status completion_status) +void isci_port_hard_reset_complete(struct isci_port *isci_port, + enum sci_status completion_status) { dev_dbg(&isci_port->isci_host->pdev->dev, "%s: isci_port = %p, completion_status=%x\n", @@ -480,3 +473,35 @@ int isci_port_perform_hard_reset( return ret; } + +/** + * isci_port_invalid_link_up() - This function informs the SCI Core user that + * a phy/link became ready, but the phy is not allowed in the port. In some + * situations the underlying hardware only allows for certain phy to port + * mappings. If these mappings are violated, then this API is invoked. + * @controller: This parameter represents the controller which contains the + * port. + * @port: This parameter specifies the SCI port object for which the callback + * is being invoked. + * @phy: This parameter specifies the phy that came ready, but the phy can't be + * a valid member of the port. + * + */ +void isci_port_invalid_link_up(struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + struct scic_sds_phy *phy) +{ + struct isci_host *ihost = + (struct isci_host *)sci_object_get_association(scic); + + dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); +} + +void isci_port_stop_complete(struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + enum sci_status completion_status) +{ + struct isci_host *ihost = sci_object_get_association(scic); + + dev_dbg(&ihost->pdev->dev, "Port stop complete\n"); +} diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index b7a7dd7..dfdd12a 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -147,5 +147,15 @@ int isci_port_perform_hard_reset( struct isci_port *isci_port_ptr, struct isci_phy *isci_phy_ptr); +void isci_port_invalid_link_up( + struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + struct scic_sds_phy *phy); + +void isci_port_stop_complete( + struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + enum sci_status completion_status); + #endif /* !defined(_ISCI_PORT_H_) */ -- cgit v0.10.2 From f942f32ea05eff727c41e1a1112cab305b836377 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 26 Mar 2011 16:30:06 -0700 Subject: isci: reorder init to cleanup unneeded declarations Just move isci_pci_driver below the function definitions and delete the declarations. A couple other whitespace fixups, and unused symbol deletions. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 1b04b9c..5e63ae6 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -84,23 +84,8 @@ static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { {} }; -struct isci_firmware *isci_firmware; - -static int __devinit isci_pci_probe( - struct pci_dev *pdev, - const struct pci_device_id *device_id_p); - -static void __devexit isci_pci_remove(struct pci_dev *pdev); - MODULE_DEVICE_TABLE(pci, isci_id_table); -static struct pci_driver isci_pci_driver = { - .name = DRV_NAME, - .id_table = isci_id_table, - .probe = isci_pci_probe, - .remove = __devexit_p(isci_pci_remove), -}; - /* linux isci specific settings */ #if defined(CONFIG_PBG_HBA_A0) @@ -339,7 +324,7 @@ static int num_controllers(struct pci_dev *pdev) */ resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2); resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2); - + if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS && smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS) return SCI_MAX_CONTROLLERS; @@ -484,7 +469,7 @@ static void check_si_rev(struct pci_dev *pdev) dev_info(&pdev->dev, "driver configured for %s silicon (rev: %d)\n", isci_si_rev == ISCI_SI_REVA0 ? "A0" : isci_si_rev == ISCI_SI_REVA2 ? "A2" : "B0", pdev->revision); - + } static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) @@ -573,6 +558,13 @@ static void __devexit isci_pci_remove(struct pci_dev *pdev) } } +static struct pci_driver isci_pci_driver = { + .name = DRV_NAME, + .id_table = isci_id_table, + .probe = isci_pci_probe, + .remove = __devexit_p(isci_pci_remove), +}; + static __init int isci_init(void) { int err; -- cgit v0.10.2 From 068b2c03635bf50c9b408b21435e23e7a0b89b0f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 26 Mar 2011 16:30:35 -0700 Subject: isci: kill some long macros Delete some macros that are longer to type than the open coded operation that they perform. scic_sds_phy_get_base_state_machine scic_sds_phy_get_starting_substate_machine scic_sds_port_get_base_state_machine scic_sds_port_get_ready_substate_machine scic_sds_remote_device_get_base_state_machine scic_sds_remote_device_get_ready_substate_machine scic_sds_remote_node_context_set_remote_node_index scic_sds_controller_get_base_state_machine Also performs some collateral cleanups like killing casts that assume structure member ordering, and consolidating a lot of duplicated default handler code (the primary callers of the *_get_base_state_machine macros) via a helper. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index eaaa4cc..7d25a0a 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -739,9 +739,8 @@ static void scic_sds_controller_transition_to_ready( * We move into the ready state, because some of the phys/ports * may be up and operational. */ - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_READY); + sci_base_state_machine_change_state(&scic->parent.state_machine, + SCI_BASE_CONTROLLER_STATE_READY); isci_host_start_complete(ihost, status); } @@ -751,18 +750,12 @@ void scic_sds_controller_timeout_handler(void *_scic) { struct scic_sds_controller *scic = _scic; struct isci_host *ihost = sci_object_get_association(scic); - enum sci_base_controller_states current_state; - - current_state = sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine(scic)); + struct sci_base_state_machine *sm = &scic->parent.state_machine; - if (current_state == SCI_BASE_CONTROLLER_STATE_STARTING) { - scic_sds_controller_transition_to_ready( - scic, SCI_FAILURE_TIMEOUT); - } else if (current_state == SCI_BASE_CONTROLLER_STATE_STOPPING) { - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_FAILED); + if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) + scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); + else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) { + sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED); isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); } else /* / @todo Now what do we want to do in this case? */ dev_err(scic_to_dev(scic), @@ -1619,16 +1612,15 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, interrupt_status); - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_FAILED); + sci_base_state_machine_change_state(&scic->parent.state_machine, + SCI_BASE_CONTROLLER_STATE_FAILED); return; } - /* - * If we dont process any completions I am not sure that we want to do this. - * We are in the middle of a hardware fault and should probably be reset. */ + /* If we dont process any completions I am not sure that we want to do this. + * We are in the middle of a hardware fault and should probably be reset. + */ SMU_IMR_WRITE(scic, 0x00000000); } @@ -1655,12 +1647,8 @@ void scic_sds_controller_link_up( else dev_dbg(scic_to_dev(scic), "%s: SCIC Controller linkup event from phy %d in " - "unexpected state %d\n", - __func__, - sci_phy->phy_index, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - scic))); + "unexpected state %d\n", __func__, sci_phy->phy_index, + state); } @@ -2125,11 +2113,7 @@ enum sci_status scic_controller_initialize( else dev_warn(scic_to_dev(scic), "%s: SCIC Controller initialize operation requested " - "in invalid state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - scic))); + "in invalid state %d\n", __func__, state); return status; } @@ -2180,11 +2164,7 @@ enum sci_status scic_controller_start( else dev_warn(scic_to_dev(scic), "%s: SCIC Controller start operation requested in " - "invalid state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - scic))); + "invalid state %d\n", __func__, state); return status; } @@ -2207,11 +2187,7 @@ enum sci_status scic_controller_stop( else dev_warn(scic_to_dev(scic), "%s: SCIC Controller stop operation requested in " - "invalid state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - scic))); + "invalid state %d\n", __func__, state); return status; } @@ -2233,11 +2209,7 @@ enum sci_status scic_controller_reset( else dev_warn(scic_to_dev(scic), "%s: SCIC Controller reset operation requested in " - "invalid state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - scic))); + "invalid state %d\n", __func__, state); return status; } @@ -2765,128 +2737,57 @@ struct scic_sds_controller *scic_controller_alloc(struct device *dev) return devm_kzalloc(dev, sizeof(struct scic_sds_controller), GFP_KERNEL); } -/* - * ***************************************************************************** - * * DEFAULT STATE HANDLERS - * ***************************************************************************** */ +static enum sci_status default_controller_handler(struct sci_base_controller *base_scic, + const char *func) +{ + struct scic_sds_controller *scic = container_of(base_scic, typeof(*scic), parent); + u32 state = base_scic->state_machine.current_state_id; + + dev_warn(scic_to_dev(scic), "%s: invalid state %d\n", func, state); + + return SCI_FAILURE_INVALID_STATE; +} -/** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which, if it was used, would - * be cast to a struct scic_sds_remote_device. - * @io_request: This is the struct sci_base_request which, if it was used, would be - * cast to a SCIC_SDS_IO_REQUEST. - * @io_tag: This is the IO tag to be assigned to the IO request or - * SCI_CONTROLLER_INVALID_IO_TAG. - * - * This method is called when the struct scic_sds_controller default start io/task - * handler is in place. - Issue a warning message enum sci_status - * SCI_FAILURE_INVALID_STATE - */ static enum sci_status scic_sds_controller_default_start_operation_handler( - struct sci_base_controller *controller, + struct sci_base_controller *base_scic, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request, u16 io_tag) { - struct scic_sds_controller *this_controller; - - this_controller = (struct scic_sds_controller *)controller; - - dev_warn(scic_to_dev(this_controller), - "%s: SCIC Controller requested to start an io/task from " - "invalid state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - this_controller))); - - return SCI_FAILURE_INVALID_STATE; + return default_controller_handler(base_scic, __func__); } -/** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which, if it was used, would - * be cast to a struct scic_sds_remote_device. - * @io_request: This is the struct sci_base_request which, if it was used, would be - * cast to a SCIC_SDS_IO_REQUEST. - * - * This method is called when the struct scic_sds_controller default request handler - * is in place. - Issue a warning message enum sci_status SCI_FAILURE_INVALID_STATE - */ static enum sci_status scic_sds_controller_default_request_handler( - struct sci_base_controller *controller, + struct sci_base_controller *base_scic, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request) { - struct scic_sds_controller *this_controller; - - this_controller = (struct scic_sds_controller *)controller; - - dev_warn(scic_to_dev(this_controller), - "%s: SCIC Controller request operation from invalid state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_controller_get_base_state_machine( - this_controller))); - - return SCI_FAILURE_INVALID_STATE; + return default_controller_handler(base_scic, __func__); } -/* - * ***************************************************************************** - * * GENERAL (COMMON) STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @controller: The struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * - * This method is called when the struct scic_sds_controller is in the ready state - * reset handler is in place. - Transition to - * SCI_BASE_CONTROLLER_STATE_RESETTING enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_controller_general_reset_handler( - struct sci_base_controller *controller) +static enum sci_status scic_sds_controller_general_reset_handler(struct sci_base_controller *base_scic) { - struct scic_sds_controller *this_controller; - - this_controller = (struct scic_sds_controller *)controller; - - /* - * The reset operation is not a graceful cleanup just perform the state - * transition. */ - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(this_controller), - SCI_BASE_CONTROLLER_STATE_RESETTING - ); + /* The reset operation is not a graceful cleanup just perform the state + * transition. + */ + sci_base_state_machine_change_state(&base_scic->state_machine, + SCI_BASE_CONTROLLER_STATE_RESETTING); return SCI_SUCCESS; } -/* - * ***************************************************************************** - * * RESET STATE HANDLERS - * ***************************************************************************** */ - static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct sci_base_controller *base_scic) { + struct sci_base_state_machine *sm = &base_scic->state_machine; enum sci_status result = SCI_SUCCESS; struct scic_sds_controller *scic; struct isci_host *ihost; - u32 index; + u32 index, state; scic = container_of(base_scic, typeof(*scic), parent); ihost = sci_object_get_association(scic); - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_INITIALIZING); + sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); scic->timeout_timer = isci_timer_create(ihost, scic, @@ -3028,13 +2929,10 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct /* Advance the controller state machine */ if (result == SCI_SUCCESS) - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_INITIALIZED); + state = SCI_BASE_CONTROLLER_STATE_INITIALIZED; else - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_FAILED); + state = SCI_BASE_CONTROLLER_STATE_FAILED; + sci_base_state_machine_change_state(sm, state); return result; } @@ -3065,14 +2963,14 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct * descriptor fields is invalid. */ static enum sci_status scic_sds_controller_initialized_state_start_handler( - struct sci_base_controller *controller, + struct sci_base_controller *base_scic, u32 timeout) { u16 index; enum sci_status result; struct scic_sds_controller *scic; - scic = (struct scic_sds_controller *)controller; + scic = container_of(base_scic, typeof(*scic), parent); /* * Make sure that the SCI User filled in the memory descriptor @@ -3135,9 +3033,8 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( isci_timer_start(scic->timeout_timer, timeout); - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_STARTING); + sci_base_state_machine_change_state(&base_scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STARTING); } return result; @@ -3197,33 +3094,15 @@ static void scic_sds_controller_starting_state_link_down_handler( /* scic_sds_port_link_down(port, phy); */ } -/* - * ***************************************************************************** - * * READY STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @controller: The struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @timeout: The timeout for when the stop operation should report a failure. - * - * This method is called when the struct scic_sds_controller is in the ready state - * stop handler is called. - Start the timeout timer - Transition to - * SCI_BASE_CONTROLLER_STATE_STOPPING. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_controller_ready_state_stop_handler( - struct sci_base_controller *controller, - u32 timeout) +static enum sci_status scic_sds_controller_ready_state_stop_handler(struct sci_base_controller *base_scic, + u32 timeout) { - struct scic_sds_controller *scic = - (struct scic_sds_controller *)controller; + struct scic_sds_controller *scic; + scic = container_of(base_scic, typeof(*scic), parent); isci_timer_start(scic->timeout_timer, timeout); - - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(scic), - SCI_BASE_CONTROLLER_STATE_STOPPING); + sci_base_state_machine_change_state(&base_scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STOPPING); return SCI_SUCCESS; } @@ -3749,33 +3628,16 @@ static inline void scic_sds_controller_stopping_state_exit( isci_timer_stop(scic->timeout_timer); } -/** - * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on entry - * to the SCI_BASE_CONTROLLER_STATE_RESETTING. - Set the state handlers to the - * controllers resetting state. - Write to the SCU hardware reset register to - * force a reset - Transition to the SCI_BASE_CONTROLLER_STATE_RESET none - */ -static void scic_sds_controller_resetting_state_enter( - struct sci_base_object *object) +static void scic_sds_controller_resetting_state_enter(struct sci_base_object *object) { - struct scic_sds_controller *this_controller; - - this_controller = (struct scic_sds_controller *)object; - - scic_sds_controller_reset_hardware(this_controller); + struct scic_sds_controller *scic; - sci_base_state_machine_change_state( - scic_sds_controller_get_base_state_machine(this_controller), - SCI_BASE_CONTROLLER_STATE_RESET - ); + scic = container_of(object, typeof(*scic), parent.parent); + scic_sds_controller_reset_hardware(scic); + sci_base_state_machine_change_state(&scic->parent.state_machine, + SCI_BASE_CONTROLLER_STATE_RESET); } -/* --------------------------------------------------------------------------- */ - const struct sci_base_state scic_sds_controller_state_table[] = { [SCI_BASE_CONTROLLER_STATE_INITIAL] = { .enter_state = scic_sds_controller_initial_state_enter, @@ -3800,4 +3662,3 @@ const struct sci_base_state scic_sds_controller_state_table[] = { [SCI_BASE_CONTROLLER_STATE_STOPPED] = {}, [SCI_BASE_CONTROLLER_STATE_FAILED] = {} }; - diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index f426324..aa2698b 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -421,15 +421,6 @@ extern const struct sci_base_state scic_sds_controller_state_table[]; } /** - * scic_sds_controller_get_base_state_machine() - - * - * This is a helper macro that gets the base state machine for the controller - * object - */ -#define scic_sds_controller_get_base_state_machine(this_controller) \ - (&(this_controller)->parent.state_machine) - -/** * scic_sds_controller_get_port_configuration_agent() - * * This is a helper macro to get the port configuration agent from the diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 225e67a..e546e20 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -246,7 +246,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, 0x1F4); /* We can exit the initial state to the stopped state */ - sci_base_state_machine_change_state(scic_sds_phy_get_base_state_machine(sci_phy), + sci_base_state_machine_change_state(&sci_phy->parent.state_machine, SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; @@ -267,13 +267,10 @@ void scic_sds_phy_sata_timeout(void *phy) __func__, sci_phy); - sci_base_state_machine_stop( - scic_sds_phy_get_starting_substate_machine(sci_phy)); + sci_base_state_machine_stop(&sci_phy->starting_substate_machine); - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(sci_phy), - SCI_BASE_PHY_STATE_STARTING - ); + sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + SCI_BASE_PHY_STATE_STARTING); } /** @@ -390,9 +387,8 @@ enum sci_status scic_sds_phy_initialize( /* * There is nothing that needs to be done in this state just * transition to the stopped state. */ - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(sci_phy), - SCI_BASE_PHY_STATE_STOPPED); + sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } @@ -716,9 +712,9 @@ static void scic_sds_phy_start_sata_link_training( } /** - * This method performs processing common to all protocols upon completion of - * link training. - * @this_phy: This parameter specifies the phy object for which link training + * scic_sds_phy_complete_link_training - perform processing common to + * all protocols upon completion of link training. + * @sci_phy: This parameter specifies the phy object for which link training * has completed. * @max_link_rate: This parameter specifies the maximum link rate to be * associated with this phy. @@ -727,37 +723,25 @@ static void scic_sds_phy_start_sata_link_training( * */ static void scic_sds_phy_complete_link_training( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, enum sci_sas_link_rate max_link_rate, u32 next_state) { - this_phy->max_negotiated_speed = max_link_rate; + sci_phy->max_negotiated_speed = max_link_rate; - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), next_state - ); + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + next_state); } -/** - * - * @this_phy: The struct scic_sds_phy object to restart. - * - * This method restarts the struct scic_sds_phy objects base state machine in the - * starting state from any starting substate. none - */ static void scic_sds_phy_restart_starting_state( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { /* Stop the current substate machine */ - sci_base_state_machine_stop( - scic_sds_phy_get_starting_substate_machine(this_phy) - ); + sci_base_state_machine_stop(&sci_phy->starting_substate_machine); /* Re-enter the base state machine starting state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_STARTING - ); + sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + SCI_BASE_PHY_STATE_STARTING); } /* **************************************************************************** @@ -1041,7 +1025,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_han } /** - * + * scic_sds_phy_starting_substate_await_sata_phy_event_handler - * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * @@ -1054,42 +1038,39 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_han * failure event SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler( - struct scic_sds_phy *this_phy, - u32 event_code) + struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(this_phy); + scic_sds_phy_restart_starting_state(sci_phy); break; case SCU_EVENT_SATA_SPINUP_HOLD: - /* - * These events might be received since we dont know how many may be in - * the completion queue while waiting for power */ + /* These events might be received since we dont know how many may be in + * the completion queue while waiting for power + */ break; case SCU_EVENT_SATA_PHY_DETECTED: - this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; /* We have received the SATA PHY notification change state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN - ); + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); break; case SCU_EVENT_SAS_PHY_DETECTED: - /* - * There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(this_phy); + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + scic_sds_phy_start_sas_link_training(sci_phy); break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -1182,7 +1163,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_han } /** - * + * scic_sds_phy_starting_substate_await_sig_fis_event_handler - * @phy: This struct scic_sds_phy object which has received an event. * @event_code: This is the event code which the phy object is to decode. * @@ -1196,27 +1177,24 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_han * unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler( - struct scic_sds_phy *this_phy, - u32 event_code) + struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_SATA_PHY_DETECTED: /* Backup the state machine */ - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN - ); + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(this_phy); + scic_sds_phy_restart_starting_state(sci_phy); break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -1249,15 +1227,14 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handle * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler( - struct scic_sds_phy *this_phy, - u32 frame_index) + struct scic_sds_phy *sci_phy, u32 frame_index) { enum sci_status result; u32 *frame_words; struct sci_sas_identify_address_frame *identify_frame; result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(this_phy)->uf_control), + &(scic_sds_phy_get_controller(sci_phy)->uf_control), frame_index, (void **)&frame_words); @@ -1269,49 +1246,43 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler identify_frame = (struct sci_sas_identify_address_frame *)frame_words; if (identify_frame->address_frame_type == 0) { - /* - * Byte swap the rest of the frame so we can make - * a copy of the buffer */ + u32 state; + + /* Byte swap the rest of the frame so we can make + * a copy of the buffer + */ frame_words[1] = SCIC_SWAP_DWORD(frame_words[1]); frame_words[2] = SCIC_SWAP_DWORD(frame_words[2]); frame_words[3] = SCIC_SWAP_DWORD(frame_words[3]); frame_words[4] = SCIC_SWAP_DWORD(frame_words[4]); frame_words[5] = SCIC_SWAP_DWORD(frame_words[5]); - memcpy( - &this_phy->phy_type.sas.identify_address_frame_buffer, + memcpy(&sci_phy->phy_type.sas.identify_address_frame_buffer, identify_frame, - sizeof(struct sci_sas_identify_address_frame) - ); + sizeof(struct sci_sas_identify_address_frame)); if (identify_frame->protocols.u.bits.smp_target) { - /* - * We got the IAF for an expander PHY go to the final state since - * there are no power requirements for expander phys. */ - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL - ); + /* We got the IAF for an expander PHY go to the final state since + * there are no power requirements for expander phys. + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; } else { /* We got the IAF we can now go to the await spinup semaphore state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER - ); + state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; } - + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + state); result = SCI_SUCCESS; } else - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected frame id %x\n", __func__, frame_index); /* Regardless of the result release this frame since we are done with it */ - scic_sds_controller_release_frame( - scic_sds_phy_get_controller(this_phy), frame_index - ); + scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), + frame_index); return result; } @@ -1331,7 +1302,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler * data */ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 frame_index) { enum sci_status result; @@ -1340,7 +1311,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle u32 *fis_frame_data; result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(this_phy)->uf_control), + &(scic_sds_phy_get_controller(sci_phy)->uf_control), frame_index, (void **)&frame_words); @@ -1350,40 +1321,33 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle fis_frame_header = (struct sata_fis_header *)frame_words; - if ( - (fis_frame_header->fis_type == SATA_FIS_TYPE_REGD2H) - && !(fis_frame_header->status & ATA_STATUS_REG_BSY_BIT) - ) { + if ((fis_frame_header->fis_type == SATA_FIS_TYPE_REGD2H) && + !(fis_frame_header->status & ATA_STATUS_REG_BSY_BIT)) { scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_phy_get_controller(this_phy)->uf_control), + &(scic_sds_phy_get_controller(sci_phy)->uf_control), frame_index, - (void **)&fis_frame_data - ); + (void **)&fis_frame_data); scic_sds_controller_copy_sata_response( - &this_phy->phy_type.sata.signature_fis_buffer, + &sci_phy->phy_type.sata.signature_fis_buffer, frame_words, - fis_frame_data - ); + fis_frame_data); /* We got the IAF we can now go to the await spinup semaphore state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL - ); + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); result = SCI_SUCCESS; } else - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected frame id %x\n", __func__, frame_index); /* Regardless of the result release this frame since we are done with it */ - scic_sds_controller_release_frame( - scic_sds_phy_get_controller(this_phy), frame_index - ); + scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), + frame_index); return result; } @@ -1394,7 +1358,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle * ***************************************************************************** */ /** - * + * scic_sds_phy_starting_substate_await_sas_power_consume_power_handler - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy * object. * @@ -1404,19 +1368,17 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { u32 enable_spinup; - enable_spinup = SCU_SAS_ENSPINUP_READ(this_phy); + enable_spinup = SCU_SAS_ENSPINUP_READ(sci_phy); enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); - SCU_SAS_ENSPINUP_WRITE(this_phy, enable_spinup); + SCU_SAS_ENSPINUP_WRITE(sci_phy, enable_spinup); /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL - ); + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); return SCI_SUCCESS; } @@ -1431,27 +1393,25 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_po * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; /* Release the spinup hold state and reset the OOB state machine */ - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value = SCU_SAS_PCFG_READ(sci_phy); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + SCU_SAS_PCFG_WRITE(sci_phy, scu_sas_pcfg_value); /* Now restart the OOB operation */ scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + SCU_SAS_PCFG_WRITE(sci_phy, scu_sas_pcfg_value); /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN - ); + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); return SCI_SUCCESS; } @@ -1566,7 +1526,7 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t * **************************************************************************** */ /** - * + * scic_sds_phy_starting_initial_substate_enter - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on @@ -1574,21 +1534,18 @@ const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_t * handlers are put in place for the struct scic_sds_phy object. - The state is * changed to the wait phy type event notification. none */ -static void scic_sds_phy_starting_initial_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); /* This is just an temporary state go off to the starting state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_starting_substate_machine(this_phy), - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN - ); + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); } /** @@ -1892,23 +1849,20 @@ static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( * object state handlers for this state. - Change base state machine to the * ready state. none */ -static void scic_sds_phy_starting_final_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_final_substate_enter(struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = container_of(object, typeof(*sci_phy), parent.parent); - scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL - ); + scic_sds_phy_set_starting_substate_handlers(sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - /* - * State machine has run to completion so exit out and change - * the base state machine to the ready state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_READY); + /* State machine has run to completion so exit out and change + * the base state machine to the ready state + */ + sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + SCI_BASE_PHY_STATE_READY); } /* --------------------------------------------------------------------------- */ @@ -2150,153 +2104,85 @@ enum sci_status scic_sds_phy_default_consume_power_handler( * attempts to start it. - The phy state machine is transitioned to the * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS */ -static enum sci_status scic_sds_phy_stopped_state_start_handler( - struct sci_base_phy *phy) +static enum sci_status scic_sds_phy_stopped_state_start_handler(struct sci_base_phy *base_phy) { - struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)phy; - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost; + struct scic_sds_phy *sci_phy; + struct scic_sds_controller *scic; + + sci_phy = container_of(base_phy, typeof(*sci_phy), parent); + scic = scic_sds_phy_get_controller(sci_phy), + ihost = sci_object_get_association(scic); /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = - isci_timer_create( - ihost, - sci_phy, - scic_sds_phy_sata_timeout); + sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, + scic_sds_phy_sata_timeout); - if (sci_phy->sata_timeout_timer != NULL) { - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(sci_phy), - SCI_BASE_PHY_STATE_STARTING); - } + if (sci_phy->sata_timeout_timer) + sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + SCI_BASE_PHY_STATE_STARTING); return SCI_SUCCESS; } -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * - * This method takes the struct scic_sds_phy from a stopped state and destroys it. - - * This function takes no action. Shouldnt this function transition the - * struct sci_base_phy::state_machine to the SCI_BASE_PHY_STATE_FINAL? enum sci_status - * SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_stopped_state_destroy_handler( - struct sci_base_phy *phy) +static enum sci_status scic_sds_phy_stopped_state_destroy_handler(struct sci_base_phy *base_phy) { - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)phy; - - /* @todo what do we actually need to do here? */ return SCI_SUCCESS; } -/* - * ****************************************************************************** - * * PHY STARTING STATE HANDLERS - * ****************************************************************************** */ - -/* All of these state handlers are mapped to the starting sub-state machine */ - -/* - * ****************************************************************************** - * * PHY READY STATE HANDLERS - * ****************************************************************************** */ - -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * - * This method takes the struct scic_sds_phy from a ready state and attempts to stop - * it. - The phy state machine is transitioned to the - * SCI_BASE_PHY_STATE_STOPPED. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_ready_state_stop_handler( - struct sci_base_phy *phy) +static enum sci_status scic_sds_phy_ready_state_stop_handler(struct sci_base_phy *base_phy) { - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)phy; - - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_STOPPED - ); + sci_base_state_machine_change_state(&base_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * - * This method takes the struct scic_sds_phy from a ready state and attempts to reset - * it. - The phy state machine is transitioned to the - * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_ready_state_reset_handler( - struct sci_base_phy *phy) +static enum sci_status scic_sds_phy_ready_state_reset_handler(struct sci_base_phy *base_phy) { - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)phy; - - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_RESETTING - ); + sci_base_state_machine_change_state(&base_phy->state_machine, + SCI_BASE_PHY_STATE_RESETTING); return SCI_SUCCESS; } /** - * + * scic_sds_phy_ready_state_event_handler - * @phy: This is the struct scic_sds_phy object which has received the event. * * This method request the struct scic_sds_phy handle the received event. The only * event that we are interested in while in the ready state is the link failure * event. - decoded event is a link failure - transition the struct scic_sds_phy back - * to the SCI_BASE_PHY_STATE_STARTING state. - any other event recived will + * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will * report a warning message enum sci_status SCI_SUCCESS if the event received is a * link failure SCI_FAILURE_INVALID_STATE for any other event received. */ -static enum sci_status scic_sds_phy_ready_state_event_handler( - struct scic_sds_phy *this_phy, - u32 event_code) +static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) { enum sci_status result = SCI_FAILURE; switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_STARTING - ); - + sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + SCI_BASE_PHY_STATE_STARTING); result = SCI_SUCCESS; break; case SCU_EVENT_BROADCAST_CHANGE: /* Broadcast change received. Notify the port. */ - if (scic_sds_phy_get_port(this_phy) != NULL) - scic_sds_port_broadcast_change_received(this_phy->owning_port, this_phy); + if (scic_sds_phy_get_port(sci_phy) != NULL) + scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); else - this_phy->bcn_received_while_port_unassigned = true; + sci_phy->bcn_received_while_port_unassigned = true; break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%sP SCIC PHY 0x%p ready state machine received " "unexpected event_code %x\n", - __func__, - this_phy, - event_code); + __func__, sci_phy, event_code); result = SCI_FAILURE_INVALID_STATE; break; @@ -2305,40 +2191,24 @@ static enum sci_status scic_sds_phy_ready_state_event_handler( return result; } -/* --------------------------------------------------------------------------- */ - -/** - * - * @this_phy: This is the struct scic_sds_phy object which is receiving the event. - * @event_code: This is the event code to be processed. - * - * This is the resetting state event handler. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_phy_resetting_state_event_handler( - struct scic_sds_phy *this_phy, - u32 event_code) +static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) { enum sci_status result = SCI_FAILURE; switch (scu_get_event_code(event_code)) { case SCU_EVENT_HARD_RESET_TRANSMITTED: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state( - scic_sds_phy_get_base_state_machine(this_phy), - SCI_BASE_PHY_STATE_STARTING - ); - + sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + SCI_BASE_PHY_STATE_STARTING); result = SCI_SUCCESS; break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: SCIC PHY 0x%p resetting state machine received " "unexpected event_code %x\n", - __func__, - this_phy, - event_code); + __func__, sci_phy, event_code); result = SCI_FAILURE_INVALID_STATE; break; diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index b611e33..af9e24c 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -317,24 +317,6 @@ extern const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_ha (scic_sds_port_get_controller((phy)->owning_port)) /** - * scic_sds_phy_get_base_state_machine() - This macro returns the state machine - * for the base phy - * - * - */ -#define scic_sds_phy_get_base_state_machine(phy) \ - (&(phy)->parent.state_machine) - -/** - * scic_sds_phy_get_starting_substate_machine() - This macro returns the - * starting substate machine for this phy - * - * - */ -#define scic_sds_phy_get_starting_substate_machine(phy) \ - (&(phy)->starting_substate_machine) - -/** * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for * this phy object * @@ -354,27 +336,6 @@ extern const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_ha &scic_sds_phy_state_handler_table[(state_id)] \ ) -/** - * scic_sds_phy_is_ready() - - * - * This macro returns true if the current base state for this phy is - * SCI_BASE_PHY_STATE_READY - */ -#define scic_sds_phy_is_ready(phy) \ - (\ - SCI_BASE_PHY_STATE_READY \ - == sci_base_state_machine_get_state(\ - scic_sds_phy_get_base_state_machine(phy) \ - ) \ - ) - -/* --------------------------------------------------------------------------- */ - - - - -/* --------------------------------------------------------------------------- */ - void scic_sds_phy_construct( struct scic_sds_phy *this_phy, struct scic_sds_port *owning_port, @@ -404,8 +365,6 @@ enum sci_status scic_sds_phy_reset( void scic_sds_phy_sata_timeout( void *cookie); -/* --------------------------------------------------------------------------- */ - void scic_sds_phy_suspend( struct scic_sds_phy *this_phy); @@ -416,8 +375,6 @@ void scic_sds_phy_setup_transport( struct scic_sds_phy *this_phy, u32 device_id); -/* --------------------------------------------------------------------------- */ - enum sci_status scic_sds_phy_event_handler( struct scic_sds_phy *this_phy, u32 event_code); @@ -445,11 +402,6 @@ void scic_sds_phy_get_attached_phy_protocols( struct scic_sds_phy *this_phy, struct sci_sas_identify_address_frame_protocols *protocols); -/* - * ****************************************************************************- - * * SCIC SDS PHY Handler Methods - * ****************************************************************************- */ - enum sci_status scic_sds_phy_default_start_handler( struct sci_base_phy *phy); diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 3ae0f0d..72b815e 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -576,12 +576,10 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, sci_base_port_construct(&sci_port->parent, scic_sds_port_state_table); - sci_base_state_machine_construct( - scic_sds_port_get_ready_substate_machine(sci_port), - &sci_port->parent.parent, - scic_sds_port_ready_substate_table, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING - ); + sci_base_state_machine_construct(&sci_port->ready_substate_machine, + &sci_port->parent.parent, + scic_sds_port_ready_substate_table, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; sci_port->physical_port_index = port_index; @@ -1339,9 +1337,9 @@ static void scic_sds_port_ready_operational_substate_link_up_handler( /** * scic_sds_port_ready_operational_substate_link_down_handler() - - * @this_port: This is the struct scic_sds_port object that which has a phy that has + * @sci_port: This is the struct scic_sds_port object that which has a phy that has * gone link down. - * @the_phy: This is the struct scic_sds_phy object that has gone link down. + * @sci_phy: This is the struct scic_sds_phy object that has gone link down. * * This method is the ready operational substate link down handler for the * struct scic_sds_port object. This function notifies the SCI User that the phy has @@ -1349,21 +1347,18 @@ static void scic_sds_port_ready_operational_substate_link_up_handler( * state to the ready waiting substate. none */ static void scic_sds_port_ready_operational_substate_link_down_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - scic_sds_port_deactivate_phy(this_port, the_phy, true); + scic_sds_port_deactivate_phy(sci_port, sci_phy, true); /* * If there are no active phys left in the port, then transition * the port to the WAITING state until such time as a phy goes * link up. */ - if (this_port->active_phy_mask == 0) { - sci_base_state_machine_change_state( - scic_sds_port_get_ready_substate_machine(this_port), - SCIC_SDS_PORT_READY_SUBSTATE_WAITING - ); - } + if (sci_port->active_phy_mask == 0) + sci_base_state_machine_change_state(&sci_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); } /** @@ -1820,169 +1815,52 @@ const struct sci_base_state scic_sds_port_ready_substate_table[] = { }, }; -/* - * *************************************************************************** - * * DEFAULT HANDLERS - * *************************************************************************** */ - -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for port a start request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_port_default_start_handler( - struct sci_base_port *port) +static enum sci_status default_port_handler(struct sci_base_port *base_port, const char *func) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)port; + struct scic_sds_port *sci_port; + sci_port = container_of(base_port, typeof(*sci_port), parent); dev_warn(sciport_to_dev(sci_port), - "%s: SCIC Port 0x%p requested to start while in invalid " - "state %d\n", - __func__, - port, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine( - (struct scic_sds_port *)port))); - + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&base_port->state_machine)); return SCI_FAILURE_INVALID_STATE; } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port stop request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_default_stop_handler( - struct sci_base_port *port) +enum sci_status scic_sds_port_default_start_handler(struct sci_base_port *base_port) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)port; - - dev_warn(sciport_to_dev(sci_port), - "%s: SCIC Port 0x%p requested to stop while in invalid " - "state %d\n", - __func__, - port, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine( - (struct scic_sds_port *)port))); - - return SCI_FAILURE_INVALID_STATE; + return default_port_handler(base_port, __func__); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port destruct request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_port_default_destruct_handler( - struct sci_base_port *port) +static enum sci_status scic_sds_port_default_stop_handler(struct sci_base_port *base_port) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)port; - - dev_warn(sciport_to_dev(sci_port), - "%s: SCIC Port 0x%p requested to destruct while in invalid " - "state %d\n", - __func__, - port, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine( - (struct scic_sds_port *)port))); - - return SCI_FAILURE_INVALID_STATE; + return default_port_handler(base_port, __func__); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * @timeout: This is the timeout for the reset request to complete. - * - * This is the default method for a port reset request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_port_default_reset_handler( - struct sci_base_port *port, - u32 timeout) +enum sci_status scic_sds_port_default_destruct_handler(struct sci_base_port *base_port) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)port; - - dev_warn(sciport_to_dev(sci_port), - "%s: SCIC Port 0x%p requested to reset while in invalid " - "state %d\n", - __func__, - port, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine( - (struct scic_sds_port *)port))); - - return SCI_FAILURE_INVALID_STATE; + return default_port_handler(base_port, __func__); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port add phy request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_default_add_phy_handler( - struct sci_base_port *port, - struct sci_base_phy *phy) +enum sci_status scic_sds_port_default_reset_handler(struct sci_base_port *base_port, + u32 timeout) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)port; - - dev_warn(sciport_to_dev(sci_port), - "%s: SCIC Port 0x%p requested to add phy 0x%p while in " - "invalid state %d\n", - __func__, - port, - phy, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine( - (struct scic_sds_port *)port))); - - return SCI_FAILURE_INVALID_STATE; + return default_port_handler(base_port, __func__); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port remove phy request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_port_default_remove_phy_handler( - struct sci_base_port *port, - struct sci_base_phy *phy) +static enum sci_status scic_sds_port_default_add_phy_handler(struct sci_base_port *base_port, + struct sci_base_phy *base_phy) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)port; - - dev_warn(sciport_to_dev(sci_port), - "%s: SCIC Port 0x%p requested to remove phy 0x%p while in " - "invalid state %d\n", - __func__, - port, - phy, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine( - (struct scic_sds_port *)port))); + return default_port_handler(base_port, __func__); +} - return SCI_FAILURE_INVALID_STATE; +enum sci_status scic_sds_port_default_remove_phy_handler(struct sci_base_port *base_port, + struct sci_base_phy *base_phy) +{ + return default_port_handler(base_port, __func__); } /** - * + * scic_sds_port_default_frame_handler * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port * object. * @@ -1991,149 +1869,48 @@ enum sci_status scic_sds_port_default_remove_phy_handler( * possible to receive an unsolicited frame directed to a port object? It * seems possible if we implementing virtual functions but until then? */ -enum sci_status scic_sds_port_default_frame_handler( - struct scic_sds_port *port, - u32 frame_index) -{ - dev_warn(sciport_to_dev(port), - "%s: SCIC Port 0x%p requested to process frame %d while in " - "invalid state %d\n", - __func__, - port, - frame_index, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine(port))); - - scic_sds_controller_release_frame( - scic_sds_port_get_controller(port), frame_index - ); - - return SCI_FAILURE_INVALID_STATE; -} +enum sci_status scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port, + u32 frame_index) +{ + struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port event request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_port_default_event_handler( - struct scic_sds_port *port, - u32 event_code) -{ - dev_warn(sciport_to_dev(port), - "%s: SCIC Port 0x%p requested to process event 0x%x while " - "in invalid state %d\n", - __func__, - port, - event_code, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine( - (struct scic_sds_port *)port))); + default_port_handler(&sci_port->parent, __func__); + scic_sds_controller_release_frame(scic, frame_index); return SCI_FAILURE_INVALID_STATE; } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port link up notification. It will report - * a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -void scic_sds_port_default_link_up_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy) +enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port, + u32 event_code) { - dev_warn(sciport_to_dev(this_port), - "%s: SCIC Port 0x%p received link_up notification from phy " - "0x%p while in invalid state %d\n", - __func__, - this_port, - phy, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine(this_port))); + return default_port_handler(&sci_port->parent, __func__); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port link down notification. It will - * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -void scic_sds_port_default_link_down_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy) +void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - dev_warn(sciport_to_dev(this_port), - "%s: SCIC Port 0x%p received link down notification from " - "phy 0x%p while in invalid state %d\n", - __func__, - this_port, - phy, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine(this_port))); + default_port_handler(&sci_port->parent, __func__); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port start io request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_port_default_start_io_handler( - struct scic_sds_port *this_port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) +void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - dev_warn(sciport_to_dev(this_port), - "%s: SCIC Port 0x%p requested to start io request 0x%p " - "while in invalid state %d\n", - __func__, - this_port, - io_request, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine(this_port))); - - return SCI_FAILURE_INVALID_STATE; + default_port_handler(&sci_port->parent, __func__); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port complete io request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_default_complete_io_handler( - struct scic_sds_port *this_port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) +enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) { - dev_warn(sciport_to_dev(this_port), - "%s: SCIC Port 0x%p requested to complete io request 0x%p " - "while in invalid state %d\n", - __func__, - this_port, - io_request, - sci_base_state_machine_get_state( - scic_sds_port_get_base_state_machine(this_port))); - - return SCI_FAILURE_INVALID_STATE; + return default_port_handler(&sci_port->parent, __func__); } -/* - * **************************************************************************** - * * GENERAL STATE HANDLERS - * **************************************************************************** */ +static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + return default_port_handler(&sci_port->parent, __func__); +} /** * @@ -2160,11 +1937,6 @@ static enum sci_status scic_sds_port_general_complete_io_handler( return SCI_SUCCESS; } -/* - * **************************************************************************** - * * STOPPED STATE HANDLERS - * **************************************************************************** */ - /** * scic_sds_port_stopped_state_start_handler() - stop a port from "started" * @@ -2242,9 +2014,8 @@ scic_sds_port_stopped_state_start_handler(struct sci_base_port *base_port) * silicon. */ if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { - sci_base_state_machine_change_state( - scic_sds_port_get_base_state_machine(sci_port), - SCI_BASE_PORT_STATE_READY); + sci_base_state_machine_change_state(&base_port->state_machine, + SCI_BASE_PORT_STATE_READY); return SCI_SUCCESS; } else @@ -2390,19 +2161,15 @@ static enum sci_status scic_sds_port_stopped_state_remove_phy_handler( * object will transition to the stopped state. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_port_stopping_state_complete_io_handler( - struct scic_sds_port *port, + struct scic_sds_port *sci_port, struct scic_sds_remote_device *device, struct scic_sds_request *io_request) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; - - scic_sds_port_decrement_request_count(this_port); + scic_sds_port_decrement_request_count(sci_port); - if (this_port->started_request_count == 0) { - sci_base_state_machine_change_state( - scic_sds_port_get_base_state_machine(this_port), - SCI_BASE_PORT_STATE_STOPPED - ); + if (sci_port->started_request_count == 0) { + sci_base_state_machine_change_state(&sci_port->parent.state_machine, + SCI_BASE_PORT_STATE_STOPPED); } return SCI_SUCCESS; @@ -2727,9 +2494,8 @@ static void scic_sds_port_stopped_state_exit( } /** - * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_port object. + * scic_sds_port_ready_state_enter - + * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state @@ -2738,50 +2504,40 @@ static void scic_sds_port_stopped_state_exit( */ static void scic_sds_port_ready_state_enter(struct sci_base_object *object) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; - struct isci_port *iport = sci_object_get_association(sci_port); - struct scic_sds_controller *scic = - scic_sds_port_get_controller(sci_port); - struct isci_host *ihost = sci_object_get_association(scic); + struct scic_sds_controller *scic; + struct scic_sds_port *sci_port; + struct isci_port *iport; + struct isci_host *ihost; + u32 prev_state; - /* - * Put the ready state handlers in place though they will not be - * there long - */ - scic_sds_port_set_base_state_handlers(sci_port, - SCI_BASE_PORT_STATE_READY); + sci_port = container_of(object, typeof(*sci_port), parent.parent); + scic = scic_sds_port_get_controller(sci_port); + ihost = sci_object_get_association(scic); + iport = sci_object_get_association(sci_port); - if (sci_port->parent.state_machine.previous_state_id == - SCI_BASE_PORT_STATE_RESETTING) + /* Put the ready state handlers in place though they will not be there long */ + scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY); + + prev_state = sci_port->parent.state_machine.previous_state_id; + if (prev_state == SCI_BASE_PORT_STATE_RESETTING) isci_port_hard_reset_complete(iport, SCI_SUCCESS); - else /* Notify the caller that the port is not yet ready */ + else isci_port_not_ready(ihost, iport); /* Post and suspend the dummy remote node context for this port. */ scic_sds_port_post_dummy_remote_node(sci_port); /* Start the ready substate machine */ - sci_base_state_machine_start( - scic_sds_port_get_ready_substate_machine(sci_port)); + sci_base_state_machine_start(&sci_port->ready_substate_machine); } -/** - * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * exiting the SCI_BASE_STATE_READY. This function does nothing. none - */ -static void scic_sds_port_ready_state_exit( - struct sci_base_object *object) +static void scic_sds_port_ready_state_exit(struct sci_base_object *object) { - struct scic_sds_port *this_port; - - this_port = (struct scic_sds_port *)object; - - sci_base_state_machine_stop(&this_port->ready_substate_machine); + struct scic_sds_port *sci_port; - scic_sds_port_invalidate_dummy_remote_node(this_port); + sci_port = container_of(object, typeof(*sci_port), parent.parent); + sci_base_state_machine_stop(&sci_port->ready_substate_machine); + scic_sds_port_invalidate_dummy_remote_node(sci_port); } /** diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index c98caef..ac81a92 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -251,14 +251,6 @@ extern struct scic_sds_port_state_handler scic_sds_port_ready_substate_handler_t ((this_port)->owning_controller) /** - * scic_sds_port_get_base_state_machine() - - * - * Helper macro to get the base state machine for this port - */ -#define scic_sds_port_get_base_state_machine(this_port) \ - (&(this_port)->parent.state_machine) - -/** * scic_sds_port_set_base_state_handlers() - * * This macro will change the state handlers to those of the specified state id @@ -268,14 +260,6 @@ extern struct scic_sds_port_state_handler scic_sds_port_ready_substate_handler_t (this_port), &scic_sds_port_state_handler_table[(state_id)]) /** - * scic_sds_port_get_ready_substate_machine() - - * - * Helper macro to get the ready substate machine for this port - */ -#define scic_sds_port_get_ready_substate_machine(this_port) \ - (&(this_port)->ready_substate_machine) - -/** * scic_sds_port_set_state_handlers() - * * Helper macro to set the port object state handlers diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index f722678..05599d1 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -135,8 +135,7 @@ enum sci_status scic_remote_device_da_construct( &remote_node_index); if (status == SCI_SUCCESS) { - scic_sds_remote_node_context_set_remote_node_index( - sci_dev->rnc, remote_node_index); + sci_dev->rnc->remote_node_index = remote_node_index; scic_sds_port_get_attached_sas_address( sci_dev->owning_port, &sci_dev->device_address); @@ -510,16 +509,14 @@ bool scic_sds_remote_device_is_atapi( static void scic_sds_cb_remote_device_rnc_destruct_complete( void *user_parameter) { - struct scic_sds_remote_device *this_device; + struct scic_sds_remote_device *sci_dev; - this_device = (struct scic_sds_remote_device *)user_parameter; + sci_dev = (struct scic_sds_remote_device *)user_parameter; - BUG_ON(this_device->started_request_count != 0); + BUG_ON(sci_dev->started_request_count != 0); - sci_base_state_machine_change_state( - scic_sds_remote_device_get_base_state_machine(this_device), - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED - ); + sci_base_state_machine_change_state(&sci_dev->parent.state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); } /** @@ -649,206 +646,64 @@ static enum sci_status scic_sds_remote_device_terminate_requests( return status; } -/* - * ***************************************************************************** - * * DEFAULT STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * - * This method is the default start handler. It logs a warning and returns a - * failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_remote_device_default_start_handler( - struct sci_base_remote_device *device) +static enum sci_status default_device_handler(struct sci_base_remote_device *base_dev, + const char *func) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to start while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - sds_device))); + struct scic_sds_remote_device *sci_dev; + sci_dev = container_of(base_dev, typeof(*sci_dev), parent); + dev_warn(scirdev_to_dev(sci_dev), + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&base_dev->state_machine)); return SCI_FAILURE_INVALID_STATE; } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * - * This method is the default stop handler. It logs a warning and returns a - * failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_default_stop_handler( - struct sci_base_remote_device *device) +enum sci_status scic_sds_remote_device_default_start_handler( + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to stop while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - sds_device))); + return default_device_handler(base_dev, __func__); +} - return SCI_FAILURE_INVALID_STATE; +static enum sci_status scic_sds_remote_device_default_stop_handler( + struct sci_base_remote_device *base_dev) +{ + return default_device_handler(base_dev, __func__); } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * - * This method is the default fail handler. It logs a warning and returns a - * failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_fail_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to fail while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - sds_device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(base_dev, __func__); } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * - * This method is the default destruct handler. It logs a warning and returns - * a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_destruct_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to destroy while in " - "wrong state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - sds_device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(base_dev, __func__); } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * - * This method is the default reset handler. It logs a warning and returns a - * failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_reset_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to reset while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - sds_device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(base_dev, __func__); } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * - * This method is the default reset complete handler. It logs a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to complete reset while " - "in wrong state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - sds_device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(base_dev, __func__); } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * - * This method is the default suspend handler. It logs a warning and returns a - * failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_suspend_handler( - struct scic_sds_remote_device *this_device, - u32 suspend_type) + struct scic_sds_remote_device *sci_dev, u32 suspend_type) { - dev_warn(scirdev_to_dev(this_device), - "%s: SCIC Remote Device 0x%p requested to suspend %d while " - "in wrong state %d\n", - __func__, - this_device, - suspend_type, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - this_device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(&sci_dev->parent, __func__); } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * - * This method is the default resume handler. It logs a warning and returns a - * failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_resume_handler( - struct scic_sds_remote_device *this_device) + struct scic_sds_remote_device *sci_dev) { - dev_warn(scirdev_to_dev(this_device), - "%s: SCIC Remote Device requested to resume while in " - "wrong state %d\n", - __func__, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - this_device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(&sci_dev->parent, __func__); } /** @@ -960,113 +815,31 @@ enum sci_status scic_sds_remote_device_default_frame_handler( return SCI_FAILURE_INVALID_STATE; } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @request: The struct sci_base_request which is then cast into a SCIC_SDS_IO_REQUEST - * to start. - * - * This method is the default start io handler. It logs a warning and returns - * a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_start_request_handler( - struct sci_base_remote_device *device, + struct sci_base_remote_device *base_dev, struct sci_base_request *request) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to start io request %p " - "while in wrong state %d\n", - __func__, - request, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - (struct scic_sds_remote_device *)device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(base_dev, __func__); } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @request: The struct sci_base_request which is then cast into a SCIC_SDS_IO_REQUEST - * to complete. - * - * This method is the default complete io handler. It logs a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct sci_base_remote_device *device, + struct sci_base_remote_device *base_dev, struct sci_base_request *request) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to complete io_request %p " - "while in wrong state %d\n", - __func__, - request, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - sds_device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(base_dev, __func__); } -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @request: The struct sci_base_request which is then cast into a SCIC_SDS_IO_REQUEST - * to continue. - * - * This method is the default continue io handler. It logs a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct sci_base_remote_device *device, + struct sci_base_remote_device *base_dev, struct sci_base_request *request) { - struct scic_sds_remote_device *sds_device = - (struct scic_sds_remote_device *)device; - - dev_warn(scirdev_to_dev(sds_device), - "%s: SCIC Remote Device requested to continue io request %p " - "while in wrong state %d\n", - __func__, - request, - sci_base_state_machine_get_state( - scic_sds_remote_device_get_base_state_machine( - sds_device))); - - return SCI_FAILURE_INVALID_STATE; + return default_device_handler(base_dev, __func__); } /** * * @device: The struct sci_base_remote_device which is then cast into a * struct scic_sds_remote_device. - * @request: The struct sci_base_request which is then cast into a SCIC_SDS_IO_REQUEST - * to complete. - * - * This method is the default complete task handler. It logs a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ - -/* - * ***************************************************************************** - * * NORMAL STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @device: The struct sci_base_remote_device which is then cast into a - * struct scic_sds_remote_device. * @frame_index: The frame index for which the struct scic_sds_controller wants this * device object to process. * @@ -1146,45 +919,32 @@ enum sci_status scic_sds_remote_device_general_event_handler( * which to construct the remote device. */ static enum sci_status scic_sds_remote_device_stopped_state_start_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { enum sci_status status; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_remote_device *sci_dev; - status = scic_sds_remote_node_context_resume( - this_device->rnc, - scic_sds_remote_device_resume_complete_handler, - this_device - ); + sci_dev = container_of(base_dev, typeof(*sci_dev), parent); - if (status == SCI_SUCCESS) { - sci_base_state_machine_change_state( - scic_sds_remote_device_get_base_state_machine(this_device), - SCI_BASE_REMOTE_DEVICE_STATE_STARTING - ); - } + status = scic_sds_remote_node_context_resume(sci_dev->rnc, + scic_sds_remote_device_resume_complete_handler, sci_dev); + + if (status == SCI_SUCCESS) + sci_base_state_machine_change_state(&base_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STARTING); return status; } -/** - * - * @this_device: The struct sci_base_remote_device which is cast into a - * struct scic_sds_remote_device. - * - * This method will stop a struct scic_sds_remote_device that is already in a stopped - * state. This is not considered an error since the device is already stopped. - * enum sci_status SCI_SUCCESS - */ static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( - struct sci_base_remote_device *this_device) + struct sci_base_remote_device *base_dev) { return SCI_SUCCESS; } /** * - * @this_device: The struct sci_base_remote_device which is cast into a + * @sci_dev: The struct sci_base_remote_device which is cast into a * struct scic_sds_remote_device. * * This method will destruct a struct scic_sds_remote_device that is in a stopped @@ -1194,25 +954,19 @@ static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( * enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - - scic_sds_controller_free_remote_node_context( - scic_sds_remote_device_get_controller(this_device), - this_device, - this_device->rnc->remote_node_index - ); + struct scic_sds_remote_device *sci_dev; + struct scic_sds_controller *scic; - scic_sds_remote_node_context_set_remote_node_index( - this_device->rnc, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX - ); + sci_dev = container_of(base_dev, typeof(*sci_dev), parent); + scic = scic_sds_remote_device_get_controller(sci_dev); + scic_sds_controller_free_remote_node_context(scic, sci_dev, + sci_dev->rnc->remote_node_index); + sci_dev->rnc->remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - sci_base_state_machine_change_state( - scic_sds_remote_device_get_base_state_machine(this_device), - SCI_BASE_REMOTE_DEVICE_STATE_FINAL - ); + sci_base_state_machine_change_state(&base_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_FINAL); return SCI_SUCCESS; } @@ -1223,86 +977,49 @@ static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( * ***************************************************************************** */ static enum sci_status scic_sds_remote_device_starting_state_stop_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_remote_device *sci_dev; + sci_dev = container_of(base_dev, typeof(*sci_dev), parent); /* * This device has not yet started so there had better be no IO requests */ - BUG_ON(this_device->started_request_count != 0); + BUG_ON(sci_dev->started_request_count != 0); /* * Destroy the remote node context */ - scic_sds_remote_node_context_destruct( - this_device->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, - this_device - ); + scic_sds_remote_node_context_destruct(sci_dev->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); /* * Transition to the stopping state and wait for the remote node to * complete being posted and invalidated. */ - sci_base_state_machine_change_state( - scic_sds_remote_device_get_base_state_machine(this_device), - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING - ); + sci_base_state_machine_change_state(&base_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); return SCI_SUCCESS; } -/* - * ***************************************************************************** - * * INITIALIZING STATE HANDLERS - * ***************************************************************************** */ - -/* There is nothing to do here for SSP devices */ - -/* - * ***************************************************************************** - * * READY STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @this_device: The struct scic_sds_remote_device object to be suspended. - * - * This method is the resume handler for the struct scic_sds_remote_device object. It - * will post an RNC resume to the SCU hardware. enum sci_status SCI_SUCCESS - */ - -/** - * - * @device: The struct sci_base_remote_device object which is cast to a - * struct scic_sds_remote_device object. - * - * This method is the default stop handler for the struct scic_sds_remote_device ready - * substate machine. It will stop the current substate machine and transition - * the base state machine to SCI_BASE_REMOTE_DEVICE_STATE_STOPPING. enum sci_status - * SCI_SUCCESS - */ enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - enum sci_status status = SCI_SUCCESS; + struct scic_sds_remote_device *sci_dev; + enum sci_status status = SCI_SUCCESS; + sci_dev = container_of(base_dev, typeof(*sci_dev), parent); /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state( - scic_sds_remote_device_get_base_state_machine(this_device), - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING - ); + sci_base_state_machine_change_state(&base_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); - if (this_device->started_request_count == 0) { - scic_sds_remote_node_context_destruct( - this_device->rnc, + if (sci_dev->started_request_count == 0) { + scic_sds_remote_node_context_destruct(sci_dev->rnc, scic_sds_cb_remote_device_rnc_destruct_complete, - this_device - ); + sci_dev); } else - status = scic_sds_remote_device_terminate_requests(this_device); + status = scic_sds_remote_device_terminate_requests(sci_dev); return status; } @@ -1315,32 +1032,20 @@ enum sci_status scic_sds_remote_device_ready_state_stop_handler( * This is the ready state device reset handler enum sci_status */ enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct sci_base_remote_device *device) + struct sci_base_remote_device *base_dev) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; + struct scic_sds_remote_device *sci_dev; + sci_dev = container_of(base_dev, typeof(*sci_dev), parent); /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state( - scic_sds_remote_device_get_base_state_machine(this_device), - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING - ); + sci_base_state_machine_change_state(&base_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); return SCI_SUCCESS; } /** * - * @device: The struct sci_base_remote_device object which is cast to a - * struct scic_sds_remote_device object. - * - * This is the default fail handler for the struct scic_sds_remote_device ready - * substate machine. It will stop the current ready substate and transition - * the remote device object to the SCI_BASE_REMOTE_DEVICE_STATE_FAILED. - * enum sci_status SCI_SUCCESS - */ - -/** - * * @device: The struct sci_base_remote_device which is cast to a * struct scic_sds_remote_device for which the request is to be started. * @request: The struct sci_base_request which is cast to a SCIC_SDS_IO_REQUEST that @@ -1775,19 +1480,15 @@ const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_h static void scic_sds_remote_device_initial_state_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - SET_STATE_HANDLER( - this_device, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL - ); + sci_dev = container_of(object, typeof(*sci_dev), parent.parent); + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); /* Initial state is a transitional state to the stopped state */ - sci_base_state_machine_change_state( - scic_sds_remote_device_get_base_state_machine(this_device), - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED - ); + sci_base_state_machine_change_state(&sci_dev->parent.state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); } /** @@ -1803,29 +1504,28 @@ static void scic_sds_remote_device_initial_state_enter( static void scic_sds_remote_device_stopped_state_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)object; - struct scic_sds_controller *scic = - scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = - sci_object_get_association(sci_dev); + struct scic_sds_remote_device *sci_dev; + struct scic_sds_controller *scic; + struct isci_remote_device *idev; + struct isci_host *ihost; + u32 prev_state; - SET_STATE_HANDLER(sci_dev, - scic_sds_remote_device_state_handler_table, + sci_dev = container_of(object, typeof(*sci_dev), parent.parent); + scic = scic_sds_remote_device_get_controller(sci_dev); + ihost = sci_object_get_association(scic); + idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); - /* - * If we are entering from the stopping state let the SCI User know that + /* If we are entering from the stopping state let the SCI User know that * the stop operation has completed. */ - if (sci_dev->parent.state_machine.previous_state_id == - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) + prev_state = sci_dev->parent.state_machine.previous_state_id; + if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) isci_remote_device_stop_complete(ihost, idev, SCI_SUCCESS); - scic_sds_controller_remote_device_stopped( - scic_sds_remote_device_get_controller(sci_dev), - sci_dev); + scic_sds_controller_remote_device_stopped(scic, sci_dev); } /** diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index 4841e45..aa46624 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -377,22 +377,6 @@ extern const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_dev ((this_device)->state_handlers = (handlers)) /** - * scic_sds_remote_device_get_base_state_machine() - - * - * This macro returns the base sate machine object for the remote device. - */ -#define scic_sds_remote_device_get_base_state_machine(this_device) \ - (&(this_device)->parent.state_machine) - -/** - * scic_sds_remote_device_get_ready_substate_machine() - - * - * This macro returns the remote device ready substate machine - */ -#define scic_sds_remote_device_get_ready_substate_machine(this_device) \ - (&(this_device)->ready_substate_machine) - -/** * scic_sds_remote_device_get_port() - * * This macro returns the owning port of this device diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h index 86c6d75..c7c75ae 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.h @@ -296,9 +296,6 @@ void scic_sds_remote_node_context_construct_buffer( bool scic_sds_remote_node_context_is_ready( struct scic_sds_remote_node_context *this_rnc); -#define scic_sds_remote_node_context_set_remote_node_index(rnc, rni) \ - ((rnc)->remote_node_index = (rni)) - #define scic_sds_remote_node_context_get_remote_node_index(rcn) \ ((rnc)->remote_node_index) -- cgit v0.10.2 From 35173d579a08c0d145b3020039d3ba33fbf2c184 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 26 Mar 2011 16:43:01 -0700 Subject: isci: namespacecheck cleanups * mark needlessly global routines static * delete unused functions * move kernel-doc blocks from header files to source * reorder some functions to delete declarations * more default handler cleanups phy Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_port.h b/drivers/scsi/isci/core/sci_base_port.h index 4e2031d..b931c3c 100644 --- a/drivers/scsi/isci/core/sci_base_port.h +++ b/drivers/scsi/isci/core/sci_base_port.h @@ -188,16 +188,4 @@ struct sci_base_port_state_handler { SCI_BASE_PORT_PHY_HANDLER_T remove_phy_handler; }; - -/** - * sci_base_port_construct() - Construct the base port object - * @this_port: This parameter specifies the base port to be constructed. - * @state_table: This parameter specifies the table of state definitions to be - * utilized for the domain state machine. - * - */ -void sci_base_port_construct( - struct sci_base_port *this_port, - const struct sci_base_state *state_table); - #endif /* _SCI_BASE_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index f64f24f..cb6abcc 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -261,19 +261,6 @@ enum sci_status scic_user_parameters_set( union scic_user_parameters *user_parameters); /** - * scic_user_parameters_get() - This method allows the user to retrieve the - * user parameters utilized by the controller. - * @controller: This parameter specifies the controller on which to set the - * user parameters. - * @user_parameters: This parameter specifies the USER_PARAMETERS object into - * which the framework shall save it's parameters. - * - */ -void scic_user_parameters_get( - struct scic_sds_controller *controller, - union scic_user_parameters *user_parameters); - -/** * scic_oem_parameters_set() - This method allows the user to attempt to change * the OEM parameters utilized by the controller. * @controller: This parameter specifies the controller on which to set the diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h index 481e0de..236c583 100644 --- a/drivers/scsi/isci/core/scic_controller.h +++ b/drivers/scsi/isci/core/scic_controller.h @@ -56,14 +56,6 @@ #ifndef _SCIC_CONTROLLER_H_ #define _SCIC_CONTROLLER_H_ -/** - * This file contains all of the interface methods that can be called by an - * SCIC user on a controller object. - * - * - */ - - #include "sci_status.h" #include "sci_controller.h" #include "scic_config_parameters.h" @@ -79,417 +71,77 @@ enum sci_controller_mode { SCI_MODE_SIZE /* Optimized for memory use */ }; - -/** - * scic_controller_construct() - This method will attempt to construct a - * controller object utilizing the supplied parameter information. - * @c: This parameter specifies the controller to be constructed. - * @scu_base: mapped base address of the scu registers - * @smu_base: mapped base address of the smu registers - * - * Indicate if the controller was successfully constructed or if it failed in - * some way. SCI_SUCCESS This value is returned if the controller was - * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned - * if the interrupt coalescence timer may cause SAS compliance issues for SMP - * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE - * This value is returned if the controller does not support the supplied type. - * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the - * controller does not support the supplied initialization data version. - */ enum sci_status scic_controller_construct(struct scic_sds_controller *c, void __iomem *scu_base, void __iomem *smu_base); -/** - * scic_controller_enable_interrupts() - This method will enable all controller - * interrupts. - * @controller: This parameter specifies the controller for which to enable - * interrupts. - * - */ void scic_controller_enable_interrupts( struct scic_sds_controller *controller); -/** - * scic_controller_disable_interrupts() - This method will disable all - * controller interrupts. - * @controller: This parameter specifies the controller for which to disable - * interrupts. - * - */ void scic_controller_disable_interrupts( struct scic_sds_controller *controller); - -/** - * scic_controller_initialize() - This method will initialize the controller - * hardware managed by the supplied core controller object. This method - * will bring the physical controller hardware out of reset and enable the - * core to determine the capabilities of the hardware being managed. Thus, - * the core controller can determine it's exact physical (DMA capable) - * memory requirements. - * @controller: This parameter specifies the controller to be initialized. - * - * The SCI Core user must have called scic_controller_construct() on the - * supplied controller object previously. Indicate if the controller was - * successfully initialized or if it failed in some way. SCI_SUCCESS This value - * is returned if the controller hardware was successfully initialized. - */ enum sci_status scic_controller_initialize( struct scic_sds_controller *controller); -/** - * scic_controller_get_suggested_start_timeout() - This method returns the - * suggested scic_controller_start() timeout amount. The user is free to - * use any timeout value, but this method provides the suggested minimum - * start timeout value. The returned value is based upon empirical - * information determined as a result of interoperability testing. - * @controller: the handle to the controller object for which to return the - * suggested start timeout. - * - * This method returns the number of milliseconds for the suggested start - * operation timeout. - */ u32 scic_controller_get_suggested_start_timeout( struct scic_sds_controller *controller); -/** - * scic_controller_start() - This method will start the supplied core - * controller. This method will start the staggered spin up operation. The - * SCI User completion callback is called when the following conditions are - * met: -# the return status of this method is SCI_SUCCESS. -# after all of - * the phys have successfully started or been given the opportunity to start. - * @controller: the handle to the controller object to start. - * @timeout: This parameter specifies the number of milliseconds in which the - * start operation should complete. - * - * The SCI Core user must have filled in the physical memory descriptor - * structure via the sci_controller_get_memory_descriptor_list() method. The - * SCI Core user must have invoked the scic_controller_initialize() method - * prior to invoking this method. The controller must be in the INITIALIZED or - * STARTED state. Indicate if the controller start method succeeded or failed - * in some way. SCI_SUCCESS if the start operation succeeded. - * SCI_WARNING_ALREADY_IN_STATE if the controller is already in the STARTED - * state. SCI_FAILURE_INVALID_STATE if the controller is not either in the - * INITIALIZED or STARTED states. SCI_FAILURE_INVALID_MEMORY_DESCRIPTOR if - * there are inconsistent or invalid values in the supplied - * struct sci_physical_memory_descriptor array. - */ enum sci_status scic_controller_start( struct scic_sds_controller *controller, u32 timeout); -/** - * scic_controller_stop() - This method will stop an individual controller - * object.This method will invoke the associated user callback upon - * completion. The completion callback is called when the following - * conditions are met: -# the method return status is SCI_SUCCESS. -# the - * controller has been quiesced. This method will ensure that all IO - * requests are quiesced, phys are stopped, and all additional operation by - * the hardware is halted. - * @controller: the handle to the controller object to stop. - * @timeout: This parameter specifies the number of milliseconds in which the - * stop operation should complete. - * - * The controller must be in the STARTED or STOPPED state. Indicate if the - * controller stop method succeeded or failed in some way. SCI_SUCCESS if the - * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the - * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the - * controller is not either in the STARTED or STOPPED states. - */ enum sci_status scic_controller_stop( struct scic_sds_controller *controller, u32 timeout); -/** - * scic_controller_reset() - This method will reset the supplied core - * controller regardless of the state of said controller. This operation is - * considered destructive. In other words, all current operations are wiped - * out. No IO completions for outstanding devices occur. Outstanding IO - * requests are not aborted or completed at the actual remote device. - * @controller: the handle to the controller object to reset. - * - * Indicate if the controller reset method succeeded or failed in some way. - * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if - * the controller reset operation is unable to complete. - */ enum sci_status scic_controller_reset( struct scic_sds_controller *controller); -/** - * scic_controller_start_io() - This method is called by the SCI user to - * send/start an IO request. If the method invocation is successful, then - * the IO request has been queued to the hardware for processing. - * @controller: the handle to the controller object for which to start an IO - * request. - * @remote_device: the handle to the remote device object for which to start an - * IO request. - * @io_request: the handle to the io request object to start. - * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. This parameter is optional. - * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value - * for this parameter. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a - * result, it is expected the user will have set the NCQ tag field in the host - * to device register FIS prior to calling this method. There is also a - * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking - * the scic_controller_start_io() method. scic_controller_allocate_tag() for - * more information on allocating a tag. Indicate if the controller - * successfully started the IO request. SCI_IO_SUCCESS if the IO request was - * successfully started. Determine the failure situations and return values. - */ enum sci_io_status scic_controller_start_io( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, struct scic_sds_request *io_request, u16 io_tag); - -/** - * scic_controller_start_task() - This method is called by the SCIC user to - * send/start a framework task management request. - * @controller: the handle to the controller object for which to start the task - * management request. - * @remote_device: the handle to the remote device object for which to start - * the task management request. - * @task_request: the handle to the task request object to start. - * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. Note this not the io_tag - * of the request being managed. It is to be utilized for the task request - * itself. This parameter is optional. The user is allowed to supply - * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - The user must synchronize this task with completion - * queue processing. If they are not synchronized then it is possible for the - * io requests that are being managed by the task request can complete before - * starting the task request. scic_controller_allocate_tag() for more - * information on allocating a tag. Indicate if the controller successfully - * started the IO request. SCI_TASK_SUCCESS if the task request was - * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is - * returned if there is/are task(s) outstanding that require termination or - * completion before this request can succeed. - */ enum sci_task_status scic_controller_start_task( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, struct scic_sds_request *task_request, u16 io_tag); -/** - * scic_controller_complete_task() - This method will perform core specific - * completion operations for task management request. After this method is - * invoked, the user should consider the task request as invalid until it is - * properly reused (i.e. re-constructed). - * @controller: The handle to the controller object for which to complete the - * task management request. - * @remote_device: The handle to the remote device object for which to complete - * the task management request. - * @task_request: the handle to the task management request object to complete. - * - * Indicate if the controller successfully completed the task management - * request. SCI_SUCCESS if the completion process was successful. - */ enum sci_status scic_controller_complete_task( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, struct scic_sds_request *task_request); - -/** - * scic_controller_terminate_request() - This method is called by the SCI Core - * user to terminate an ongoing (i.e. started) core IO request. This does - * not abort the IO request at the target, but rather removes the IO request - * from the host controller. - * @controller: the handle to the controller object for which to terminate a - * request. - * @remote_device: the handle to the remote device object for which to - * terminate a request. - * @request: the handle to the io or task management request object to - * terminate. - * - * Indicate if the controller successfully began the terminate process for the - * IO request. SCI_SUCCESS if the terminate process was successfully started - * for the request. Determine the failure situations and return values. - */ enum sci_status scic_controller_terminate_request( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, struct scic_sds_request *request); -/** - * scic_controller_complete_io() - This method will perform core specific - * completion operations for an IO request. After this method is invoked, - * the user should consider the IO request as invalid until it is properly - * reused (i.e. re-constructed). - * @controller: The handle to the controller object for which to complete the - * IO request. - * @remote_device: The handle to the remote device object for which to complete - * the IO request. - * @io_request: the handle to the io request object to complete. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI - * Core user, using the scic_controller_allocate_io_tag() method, then it is - * the responsibility of the caller to invoke the scic_controller_free_io_tag() - * method to free the tag (i.e. this method will not free the IO tag). Indicate - * if the controller successfully completed the IO request. SCI_SUCCESS if the - * completion process was successful. - */ enum sci_status scic_controller_complete_io( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, struct scic_sds_request *io_request); - -/** - * scic_controller_get_port_handle() - This method simply provides the user - * with a unique handle for a given SAS/SATA core port index. - * @controller: This parameter represents the handle to the controller object - * from which to retrieve a port (SAS or SATA) handle. - * @port_index: This parameter specifies the port index in the controller for - * which to retrieve the port handle. 0 <= port_index < maximum number of - * phys. - * @port_handle: This parameter specifies the retrieved port handle to be - * provided to the caller. - * - * Indicate if the retrieval of the port handle was successful. SCI_SUCCESS - * This value is returned if the retrieval was successful. - * SCI_FAILURE_INVALID_PORT This value is returned if the supplied port id is - * not in the supported range. - */ enum sci_status scic_controller_get_port_handle( struct scic_sds_controller *controller, u8 port_index, struct scic_sds_port **port_handle); -/** - * scic_controller_get_phy_handle() - This method simply provides the user with - * a unique handle for a given SAS/SATA phy index/identifier. - * @controller: This parameter represents the handle to the controller object - * from which to retrieve a phy (SAS or SATA) handle. - * @phy_index: This parameter specifies the phy index in the controller for - * which to retrieve the phy handle. 0 <= phy_index < maximum number of phys. - * @phy_handle: This parameter specifies the retrieved phy handle to be - * provided to the caller. - * - * Indicate if the retrieval of the phy handle was successful. SCI_SUCCESS This - * value is returned if the retrieval was successful. SCI_FAILURE_INVALID_PHY - * This value is returned if the supplied phy id is not in the supported range. - */ enum sci_status scic_controller_get_phy_handle( struct scic_sds_controller *controller, u8 phy_index, struct scic_sds_phy **phy_handle); -/** - * scic_controller_allocate_io_tag() - This method will allocate a tag from the - * pool of free IO tags. Direct allocation of IO tags by the SCI Core user - * is optional. The scic_controller_start_io() method will allocate an IO - * tag if this method is not utilized and the tag is not supplied to the IO - * construct routine. Direct allocation of IO tags may provide additional - * performance improvements in environments capable of supporting this usage - * model. Additionally, direct allocation of IO tags also provides - * additional flexibility to the SCI Core user. Specifically, the user may - * retain IO tags across the lives of multiple IO requests. - * @controller: the handle to the controller object for which to allocate the - * tag. - * - * IO tags are a protected resource. It is incumbent upon the SCI Core user to - * ensure that each of the methods that may allocate or free available IO tags - * are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). An unsigned integer representing an available IO tag. - * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no - * currently available tags to be allocated. All return other values indicate a - * legitimate tag. - */ u16 scic_controller_allocate_io_tag( struct scic_sds_controller *controller); -/** - * scic_controller_free_io_tag() - This method will free an IO tag to the pool - * of free IO tags. This method provides the SCI Core user more flexibility - * with regards to IO tags. The user may desire to keep an IO tag after an - * IO request has completed, because they plan on re-using the tag for a - * subsequent IO request. This method is only legal if the tag was - * allocated via scic_controller_allocate_io_tag(). - * @controller: This parameter specifies the handle to the controller object - * for which to free/return the tag. - * @io_tag: This parameter represents the tag to be freed to the pool of - * available tags. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI - * Core user, using the scic_controller_allocate_io_tag() method, then it is - * the responsibility of the caller to invoke this method to free the tag. This - * method returns an indication of whether the tag was successfully put back - * (freed) to the pool of available tags. SCI_SUCCESS This return value - * indicates the tag was successfully placed into the pool of available IO - * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag - * is not a valid IO tag value. - */ enum sci_status scic_controller_free_io_tag( struct scic_sds_controller *controller, u16 io_tag); - - - -/** - * scic_controller_set_mode() - This method allows the user to configure the - * SCI core into either a performance mode or a memory savings mode. - * @controller: This parameter represents the handle to the controller object - * for which to update the operating mode. - * @mode: This parameter specifies the new mode for the controller. - * - * Indicate if the user successfully change the operating mode of the - * controller. SCI_SUCCESS The user successfully updated the mode. - */ -enum sci_status scic_controller_set_mode( - struct scic_sds_controller *controller, - enum sci_controller_mode mode); - - -/** - * scic_controller_set_interrupt_coalescence() - This method allows the user to - * configure the interrupt coalescence. - * @controller: This parameter represents the handle to the controller object - * for which its interrupt coalesce register is overridden. - * @coalesce_number: Used to control the number of entries in the Completion - * Queue before an interrupt is generated. If the number of entries exceed - * this number, an interrupt will be generated. The valid range of the input - * is [0, 256]. A setting of 0 results in coalescing being disabled. - * @coalesce_timeout: Timeout value in microseconds. The valid range of the - * input is [0, 2700000] . A setting of 0 is allowed and results in no - * interrupt coalescing timeout. - * - * Indicate if the user successfully set the interrupt coalesce parameters. - * SCI_SUCCESS The user successfully updated the interrutp coalescence. - * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. - */ -enum sci_status scic_controller_set_interrupt_coalescence( - struct scic_sds_controller *controller, - u32 coalesce_number, - u32 coalesce_timeout); - struct device; struct scic_sds_controller *scic_controller_alloc(struct device *dev); - - #endif /* _SCIC_CONTROLLER_H_ */ - diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h index a52f33d..fea894a 100644 --- a/drivers/scsi/isci/core/scic_io_request.h +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -325,7 +325,7 @@ enum sci_status scic_io_request_construct( struct scic_sds_remote_device *scic_remote_device, u16 io_tag, void *user_io_request_object, - void *scic_io_request_memory, + struct scic_sds_request *scic_io_request_memory, struct scic_sds_request **new_scic_io_request_handle); /** diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index 8222443..5829533 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -56,14 +56,6 @@ #ifndef _SCIC_PORT_H_ #define _SCIC_PORT_H_ -/** - * This file contains all of the interface methods that can be called by an SCI - * Core user on a SAS or SATA port. - * - * - */ - - #include "sci_status.h" #include "intel_sas.h" @@ -78,118 +70,28 @@ enum SCIC_PORT_NOT_READY_REASON_CODE { SCIC_PORT_NOT_READY_REASON_CODE_MAX }; -/** - * struct scic_port_end_point_properties - This structure defines the - * properties that can be retrieved for each end-point local or remote - * (attached) port in the controller. - * - * - */ struct scic_port_end_point_properties { - /** - * This field indicates the SAS address for the associated end - * point in the port. - */ struct sci_sas_address sas_address; - - /** - * This field indicates the protocols supported by the associated - * end-point in the port. - */ struct sci_sas_identify_address_frame_protocols protocols; }; -/** - * struct scic_port_properties - This structure defines the properties that can - * be retrieved for each port in the controller. - * - * - */ struct scic_port_properties { - /** - * This field specifies the logical index of the port (0 relative). - */ u32 index; - - /** - * This field indicates the local end-point properties for port. - */ struct scic_port_end_point_properties local; - - /** - * This field indicates the remote (attached) end-point properties - * for the port. - */ struct scic_port_end_point_properties remote; - - /** - * This field specifies the phys contained inside the port. - */ u32 phy_mask; - }; -/** - * scic_port_get_properties() - This method simply returns the properties - * regarding the port, such as: physical index, protocols, sas address, etc. - * @port: this parameter specifies the port for which to retrieve the physical - * index. - * @properties: This parameter specifies the properties structure into which to - * copy the requested information. - * - * Indicate if the user specified a valid port. SCI_SUCCESS This value is - * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This - * value is returned if the specified port is not valid. When this value is - * returned, no data is copied to the properties output parameter. - */ enum sci_status scic_port_get_properties( struct scic_sds_port *port, struct scic_port_properties *properties); -/** - * scic_port_stop() - This method will make the port no longer ready for - * operation. After invoking this method IO operation is not possible. - * @port: This parameter specifies the port to be stopped. - * - * Indicate if the port was successfully stopped. SCI_SUCCESS This value is - * returned if the port was successfully stopped. SCI_WARNING_ALREADY_IN_STATE - * This value is returned if the port is already stopped or in the process of - * stopping. SCI_FAILURE_INVALID_PORT This value is returned if the supplied - * port is not valid. SCI_FAILURE_INVALID_STATE This value is returned if a - * stop operation can't be completed due to the state of port. - */ -enum sci_status scic_port_stop( - struct scic_sds_port *port); - -/** - * scic_port_hard_reset() - This method will request the SCI implementation to - * perform a HARD RESET on the SAS Port. If/When the HARD RESET completes - * the SCI user will be notified via an SCI OS callback indicating a direct - * attached device was found. - * @port: a handle corresponding to the SAS port to be hard reset. - * @reset_timeout: This parameter specifies the number of milliseconds in which - * the port reset operation should complete. - * - * The SCI User callback in SCIC_USER_CALLBACKS_T will only be called once for - * each phy in the SAS Port at completion of the hard reset sequence. Return a - * status indicating whether the hard reset started successfully. SCI_SUCCESS - * This value is returned if the hard reset operation started successfully. - */ enum sci_status scic_port_hard_reset( struct scic_sds_port *port, u32 reset_timeout); -/** - * scic_port_enable_broadcast_change_notification() - This API method enables - * the broadcast change notification from underneath hardware. - * @port: The port upon which broadcast change notifications (BCN) are to be - * enabled. - * - */ void scic_port_enable_broadcast_change_notification( struct scic_sds_port *port); - #endif /* _SCIC_PORT_H_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 7d25a0a..5cc6f2f 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -219,98 +219,33 @@ sci_controller_get_memory_descriptor_list_handle(struct scic_sds_controller *sci return &scic->parent.mdl; } -/* - * ****************************************************************************- - * * SCIC SDS Controller Initialization Methods - * ****************************************************************************- */ - -/** - * This timer is used to start another phy after we have given up on the - * previous phy to transition to the ready state. - * - * - */ -static void scic_sds_controller_phy_startup_timeout_handler( - void *controller) -{ - enum sci_status status; - struct scic_sds_controller *this_controller; - - this_controller = (struct scic_sds_controller *)controller; - - this_controller->phy_startup_timer_pending = false; - - status = SCI_FAILURE; - - while (status != SCI_SUCCESS) { - status = scic_sds_controller_start_next_phy(this_controller); - } -} - -/** - * - * - * This method initializes the phy startup operations for controller start. - */ -enum sci_status scic_sds_controller_initialize_phy_startup( - struct scic_sds_controller *scic) +static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) { struct isci_host *ihost = sci_object_get_association(scic); + scic->power_control.timer = isci_timer_create(ihost, + scic, + scic_sds_controller_power_control_timer_handler); - scic->phy_startup_timer = isci_timer_create(ihost, - scic, - scic_sds_controller_phy_startup_timeout_handler); - - if (scic->phy_startup_timer == NULL) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - else { - scic->next_phy_to_start = 0; - scic->phy_startup_timer_pending = false; - } - - return SCI_SUCCESS; -} - -/** - * - * - * This method initializes the power control operations for the controller - * object. - */ -void scic_sds_controller_initialize_power_control( - struct scic_sds_controller *scic) -{ - struct isci_host *ihost = sci_object_get_association(scic); - scic->power_control.timer = isci_timer_create( - ihost, - scic, - scic_sds_controller_power_control_timer_handler); - - memset(scic->power_control.requesters, - 0, + memset(scic->power_control.requesters, 0, sizeof(scic->power_control.requesters)); scic->power_control.phys_waiting = 0; scic->power_control.phys_granted_power = 0; } -/* --------------------------------------------------------------------------- */ - #define SCU_REMOTE_NODE_CONTEXT_ALIGNMENT (32) #define SCU_TASK_CONTEXT_ALIGNMENT (256) #define SCU_UNSOLICITED_FRAME_ADDRESS_ALIGNMENT (64) #define SCU_UNSOLICITED_FRAME_BUFFER_ALIGNMENT (1024) #define SCU_UNSOLICITED_FRAME_HEADER_ALIGNMENT (64) -/* --------------------------------------------------------------------------- */ - /** * This method builds the memory descriptor table for this controller. * @this_controller: This parameter specifies the controller object for which * to build the memory table. * */ -void scic_sds_controller_build_memory_descriptor_table( +static void scic_sds_controller_build_memory_descriptor_table( struct scic_sds_controller *this_controller) { sci_base_mde_construct( @@ -356,7 +291,7 @@ void scic_sds_controller_build_memory_descriptor_table( * * enum sci_status */ -enum sci_status scic_sds_controller_validate_memory_descriptor_table( +static enum sci_status scic_sds_controller_validate_memory_descriptor_table( struct scic_sds_controller *this_controller) { bool mde_list_valid; @@ -410,7 +345,7 @@ enum sci_status scic_sds_controller_validate_memory_descriptor_table( * @this_controller: * */ -void scic_sds_controller_ram_initialization( +static void scic_sds_controller_ram_initialization( struct scic_sds_controller *this_controller) { struct sci_physical_memory_descriptor *mde; @@ -457,7 +392,7 @@ void scic_sds_controller_ram_initialization( * @this_controller: * */ -void scic_sds_controller_assign_task_entries( +static void scic_sds_controller_assign_task_entries( struct scic_sds_controller *this_controller) { u32 task_assignment; @@ -483,7 +418,7 @@ void scic_sds_controller_assign_task_entries( * * */ -void scic_sds_controller_initialize_completion_queue( +static void scic_sds_controller_initialize_completion_queue( struct scic_sds_controller *this_controller) { u32 index; @@ -533,7 +468,7 @@ void scic_sds_controller_initialize_completion_queue( * * */ -void scic_sds_controller_initialize_unsolicited_frame_queue( +static void scic_sds_controller_initialize_unsolicited_frame_queue( struct scic_sds_controller *this_controller) { u32 frame_queue_control_value; @@ -565,7 +500,7 @@ void scic_sds_controller_initialize_unsolicited_frame_queue( * * */ -void scic_sds_controller_enable_port_task_scheduler( +static void scic_sds_controller_enable_port_task_scheduler( struct scic_sds_controller *this_controller) { u32 port_task_scheduler_value; @@ -578,8 +513,6 @@ void scic_sds_controller_enable_port_task_scheduler( SCU_PTSGCR_WRITE(this_controller, port_task_scheduler_value); } -/* --------------------------------------------------------------------------- */ - /** * * @@ -591,7 +524,7 @@ void scic_sds_controller_enable_port_task_scheduler( /* Initialize the AFE for this phy index. We need to read the AFE setup from * the OEM parameters none */ -void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) +static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) { const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; u32 afe_status; @@ -746,7 +679,7 @@ static void scic_sds_controller_transition_to_ready( } } -void scic_sds_controller_timeout_handler(void *_scic) +static void scic_sds_controller_timeout_handler(void *_scic) { struct scic_sds_controller *scic = _scic; struct isci_host *ihost = sci_object_get_association(scic); @@ -764,7 +697,7 @@ void scic_sds_controller_timeout_handler(void *_scic) __func__); } -enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) +static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) { u32 index; enum sci_status port_status; @@ -802,8 +735,7 @@ static inline void scic_sds_controller_phy_timer_start( scic->phy_startup_timer_pending = true; } -inline void scic_sds_controller_phy_timer_stop( - struct scic_sds_controller *scic) +static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic) { isci_timer_stop(scic->phy_startup_timer); @@ -811,16 +743,14 @@ inline void scic_sds_controller_phy_timer_stop( } /** - * This method is called internally by the controller object to start the next - * phy on the controller. If all the phys have been started, then this - * method will attempt to transition the controller to the READY state and - * inform the user (scic_cb_controller_start_complete()). - * @this_controller: This parameter specifies the controller object for which - * to start the next phy. + * scic_sds_controller_start_next_phy - start phy + * @scic: controller * - * enum sci_status + * If all the phys have been started, then attempt to transition the + * controller to the READY state and inform the user + * (scic_cb_controller_start_complete()). */ -enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) +static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) { struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; struct scic_sds_phy *sci_phy; @@ -907,14 +837,36 @@ enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *s return status; } -/** - * - * @this_controller: - * - * enum sci_status - */ -enum sci_status scic_sds_controller_stop_phys( - struct scic_sds_controller *this_controller) +static void scic_sds_controller_phy_startup_timeout_handler(void *_scic) +{ + struct scic_sds_controller *scic = _scic; + enum sci_status status; + + scic->phy_startup_timer_pending = false; + status = SCI_FAILURE; + while (status != SCI_SUCCESS) + status = scic_sds_controller_start_next_phy(scic); +} + +static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) +{ + struct isci_host *ihost = sci_object_get_association(scic); + + scic->phy_startup_timer = isci_timer_create(ihost, + scic, + scic_sds_controller_phy_startup_timeout_handler); + + if (scic->phy_startup_timer == NULL) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + else { + scic->next_phy_to_start = 0; + scic->phy_startup_timer_pending = false; + } + + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic) { u32 index; enum sci_status status; @@ -923,7 +875,7 @@ enum sci_status scic_sds_controller_stop_phys( status = SCI_SUCCESS; for (index = 0; index < SCI_MAX_PHYS; index++) { - phy_status = scic_sds_phy_stop(&this_controller->phy_table[index]); + phy_status = scic_sds_phy_stop(&scic->phy_table[index]); if ( (phy_status != SCI_SUCCESS) @@ -931,25 +883,18 @@ enum sci_status scic_sds_controller_stop_phys( ) { status = SCI_FAILURE; - dev_warn(scic_to_dev(this_controller), + dev_warn(scic_to_dev(scic), "%s: Controller stop operation failed to stop " "phy %d because of status %d.\n", __func__, - this_controller->phy_table[index].phy_index, phy_status); + scic->phy_table[index].phy_index, phy_status); } } return status; } -/** - * - * @this_controller: - * - * enum sci_status - */ -enum sci_status scic_sds_controller_stop_devices( - struct scic_sds_controller *this_controller) +static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic) { u32 index; enum sci_status status; @@ -957,19 +902,19 @@ enum sci_status scic_sds_controller_stop_devices( status = SCI_SUCCESS; - for (index = 0; index < this_controller->remote_node_entries; index++) { - if (this_controller->device_table[index] != NULL) { + for (index = 0; index < scic->remote_node_entries; index++) { + if (scic->device_table[index] != NULL) { /* / @todo What timeout value do we want to provide to this request? */ - device_status = scic_remote_device_stop(this_controller->device_table[index], 0); + device_status = scic_remote_device_stop(scic->device_table[index], 0); if ((device_status != SCI_SUCCESS) && (device_status != SCI_FAILURE_INVALID_STATE)) { - dev_warn(scic_to_dev(this_controller), + dev_warn(scic_to_dev(scic), "%s: Controller stop operation failed " "to stop device 0x%p because of " "status %d.\n", __func__, - this_controller->device_table[index], device_status); + scic->device_table[index], device_status); } } } @@ -977,18 +922,7 @@ enum sci_status scic_sds_controller_stop_devices( return status; } -/* - * ****************************************************************************- - * * SCIC SDS Controller Power Control (Staggered Spinup) - * ****************************************************************************- */ - -/** - * This function starts the power control timer for this controller object. - * - * @param scic - */ -static inline void scic_sds_controller_power_control_timer_start( - struct scic_sds_controller *scic) +static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic) { isci_timer_start(scic->power_control.timer, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); @@ -996,13 +930,7 @@ static inline void scic_sds_controller_power_control_timer_start( scic->power_control.timer_started = true; } -/** - * This method stops the power control timer for this controller object. - * - * @param scic - */ -static inline void scic_sds_controller_power_control_timer_stop( - struct scic_sds_controller *scic) +static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic) { if (scic->power_control.timer_started) { isci_timer_stop(scic->power_control.timer); @@ -1010,24 +938,12 @@ static inline void scic_sds_controller_power_control_timer_stop( } } -/** - * This method stops and starts the power control timer for this controller - * object. - * - * @param scic - */ -static inline void scic_sds_controller_power_control_timer_restart( - struct scic_sds_controller *scic) +static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic) { scic_sds_controller_power_control_timer_stop(scic); scic_sds_controller_power_control_timer_start(scic); } -/** - * - * - * - */ static void scic_sds_controller_power_control_timer_handler( void *controller) { @@ -1146,8 +1062,6 @@ static bool scic_sds_controller_completion_queue_has_entries( return false; } -/* --------------------------------------------------------------------------- */ - /** * This method processes a task completion notification. This is called from * within the controller completion handler. @@ -1625,10 +1539,6 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) } -u32 scic_sds_controller_get_object_size(void) -{ - return sizeof(struct scic_sds_controller); -} void scic_sds_controller_link_up( @@ -1703,7 +1613,7 @@ void scic_sds_controller_remote_device_started(struct scic_sds_controller *scic, * controller are still in the stopping state. * */ -bool scic_sds_controller_has_remote_devices_stopping( +static bool scic_sds_controller_has_remote_devices_stopping( struct scic_sds_controller *this_controller) { u32 index; @@ -2042,62 +1952,20 @@ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_co scic->user_parameters.sds1.no_outbound_task_timeout = 20; } - -enum sci_status scic_controller_construct(struct scic_sds_controller *controller, - void __iomem *scu_base, - void __iomem *smu_base) -{ - u8 index; - - sci_base_controller_construct( - &controller->parent, - scic_sds_controller_state_table, - controller->memory_descriptors, - ARRAY_SIZE(controller->memory_descriptors), - NULL - ); - - controller->scu_registers = scu_base; - controller->smu_registers = smu_base; - - scic_sds_port_configuration_agent_construct(&controller->port_agent); - - /* Construct the ports for this controller */ - for (index = 0; index < SCI_MAX_PORTS; index++) - scic_sds_port_construct(&controller->port_table[index], - index, controller); - scic_sds_port_construct(&controller->port_table[index], - SCIC_SDS_DUMMY_PORT, controller); - - /* Construct the phys for this controller */ - for (index = 0; index < SCI_MAX_PHYS; index++) { - /* Add all the PHYs to the dummy port */ - scic_sds_phy_construct( - &controller->phy_table[index], - &controller->port_table[SCI_MAX_PORTS], - index - ); - } - - controller->invalid_phy_mask = 0; - - /* Set the default maximum values */ - controller->completion_event_entries = SCU_EVENT_COUNT; - controller->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; - controller->remote_node_entries = SCI_MAX_REMOTE_DEVICES; - controller->logical_port_entries = SCI_MAX_PORTS; - controller->task_context_entries = SCU_IO_REQUEST_COUNT; - controller->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT; - controller->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT; - - /* Initialize the User and OEM parameters to default values. */ - scic_sds_controller_set_default_config_parameters(controller); - - return scic_controller_reset(controller); -} - -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_initialize() - This method will initialize the controller + * hardware managed by the supplied core controller object. This method + * will bring the physical controller hardware out of reset and enable the + * core to determine the capabilities of the hardware being managed. Thus, + * the core controller can determine it's exact physical (DMA capable) + * memory requirements. + * @controller: This parameter specifies the controller to be initialized. + * + * The SCI Core user must have called scic_controller_construct() on the + * supplied controller object previously. Indicate if the controller was + * successfully initialized or if it failed in some way. SCI_SUCCESS This value + * is returned if the controller hardware was successfully initialized. + */ enum sci_status scic_controller_initialize( struct scic_sds_controller *scic) { @@ -2118,8 +1986,18 @@ enum sci_status scic_controller_initialize( return status; } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_get_suggested_start_timeout() - This method returns the + * suggested scic_controller_start() timeout amount. The user is free to + * use any timeout value, but this method provides the suggested minimum + * start timeout value. The returned value is based upon empirical + * information determined as a result of interoperability testing. + * @controller: the handle to the controller object for which to return the + * suggested start timeout. + * + * This method returns the number of milliseconds for the suggested start + * operation timeout. + */ u32 scic_controller_get_suggested_start_timeout( struct scic_sds_controller *sc) { @@ -2146,8 +2024,28 @@ u32 scic_controller_get_suggested_start_timeout( + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_start() - This method will start the supplied core + * controller. This method will start the staggered spin up operation. The + * SCI User completion callback is called when the following conditions are + * met: -# the return status of this method is SCI_SUCCESS. -# after all of + * the phys have successfully started or been given the opportunity to start. + * @controller: the handle to the controller object to start. + * @timeout: This parameter specifies the number of milliseconds in which the + * start operation should complete. + * + * The SCI Core user must have filled in the physical memory descriptor + * structure via the sci_controller_get_memory_descriptor_list() method. The + * SCI Core user must have invoked the scic_controller_initialize() method + * prior to invoking this method. The controller must be in the INITIALIZED or + * STARTED state. Indicate if the controller start method succeeded or failed + * in some way. SCI_SUCCESS if the start operation succeeded. + * SCI_WARNING_ALREADY_IN_STATE if the controller is already in the STARTED + * state. SCI_FAILURE_INVALID_STATE if the controller is not either in the + * INITIALIZED or STARTED states. SCI_FAILURE_INVALID_MEMORY_DESCRIPTOR if + * there are inconsistent or invalid values in the supplied + * struct sci_physical_memory_descriptor array. + */ enum sci_status scic_controller_start( struct scic_sds_controller *scic, u32 timeout) @@ -2169,8 +2067,24 @@ enum sci_status scic_controller_start( return status; } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_stop() - This method will stop an individual controller + * object.This method will invoke the associated user callback upon + * completion. The completion callback is called when the following + * conditions are met: -# the method return status is SCI_SUCCESS. -# the + * controller has been quiesced. This method will ensure that all IO + * requests are quiesced, phys are stopped, and all additional operation by + * the hardware is halted. + * @controller: the handle to the controller object to stop. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * The controller must be in the STARTED or STOPPED state. Indicate if the + * controller stop method succeeded or failed in some way. SCI_SUCCESS if the + * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the + * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the + * controller is not either in the STARTED or STOPPED states. + */ enum sci_status scic_controller_stop( struct scic_sds_controller *scic, u32 timeout) @@ -2192,8 +2106,18 @@ enum sci_status scic_controller_stop( return status; } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_reset() - This method will reset the supplied core + * controller regardless of the state of said controller. This operation is + * considered destructive. In other words, all current operations are wiped + * out. No IO completions for outstanding devices occur. Outstanding IO + * requests are not aborted or completed at the actual remote device. + * @controller: the handle to the controller object to reset. + * + * Indicate if the controller reset method succeeded or failed in some way. + * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if + * the controller reset operation is unable to complete. + */ enum sci_status scic_controller_reset( struct scic_sds_controller *scic) { @@ -2214,6 +2138,33 @@ enum sci_status scic_controller_reset( return status; } +/** + * scic_controller_start_io() - This method is called by the SCI user to + * send/start an IO request. If the method invocation is successful, then + * the IO request has been queued to the hardware for processing. + * @controller: the handle to the controller object for which to start an IO + * request. + * @remote_device: the handle to the remote device object for which to start an + * IO request. + * @io_request: the handle to the io request object to start. + * @io_tag: This parameter specifies a previously allocated IO tag that the + * user desires to be utilized for this request. This parameter is optional. + * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value + * for this parameter. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a + * result, it is expected the user will have set the NCQ tag field in the host + * to device register FIS prior to calling this method. There is also a + * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking + * the scic_controller_start_io() method. scic_controller_allocate_tag() for + * more information on allocating a tag. Indicate if the controller + * successfully started the IO request. SCI_IO_SUCCESS if the IO request was + * successfully started. Determine the failure situations and return values. + */ enum sci_io_status scic_controller_start_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, @@ -2231,8 +2182,22 @@ enum sci_io_status scic_controller_start_io( (struct sci_base_request *)io_request, io_tag); } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_terminate_request() - This method is called by the SCI Core + * user to terminate an ongoing (i.e. started) core IO request. This does + * not abort the IO request at the target, but rather removes the IO request + * from the host controller. + * @controller: the handle to the controller object for which to terminate a + * request. + * @remote_device: the handle to the remote device object for which to + * terminate a request. + * @request: the handle to the io or task management request object to + * terminate. + * + * Indicate if the controller successfully began the terminate process for the + * IO request. SCI_SUCCESS if the terminate process was successfully started + * for the request. Determine the failure situations and return values. + */ enum sci_status scic_controller_terminate_request( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, @@ -2249,8 +2214,28 @@ enum sci_status scic_controller_terminate_request( (struct sci_base_request *)request); } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_complete_io() - This method will perform core specific + * completion operations for an IO request. After this method is invoked, + * the user should consider the IO request as invalid until it is properly + * reused (i.e. re-constructed). + * @controller: The handle to the controller object for which to complete the + * IO request. + * @remote_device: The handle to the remote device object for which to complete + * the IO request. + * @io_request: the handle to the io request object to complete. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI + * Core user, using the scic_controller_allocate_io_tag() method, then it is + * the responsibility of the caller to invoke the scic_controller_free_io_tag() + * method to free the tag (i.e. this method will not free the IO tag). Indicate + * if the controller successfully completed the IO request. SCI_SUCCESS if the + * completion process was successful. + */ enum sci_status scic_controller_complete_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, @@ -2267,9 +2252,34 @@ enum sci_status scic_controller_complete_io( (struct sci_base_request *)io_request); } -/* --------------------------------------------------------------------------- */ - - +/** + * scic_controller_start_task() - This method is called by the SCIC user to + * send/start a framework task management request. + * @controller: the handle to the controller object for which to start the task + * management request. + * @remote_device: the handle to the remote device object for which to start + * the task management request. + * @task_request: the handle to the task request object to start. + * @io_tag: This parameter specifies a previously allocated IO tag that the + * user desires to be utilized for this request. Note this not the io_tag + * of the request being managed. It is to be utilized for the task request + * itself. This parameter is optional. The user is allowed to supply + * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - The user must synchronize this task with completion + * queue processing. If they are not synchronized then it is possible for the + * io requests that are being managed by the task request can complete before + * starting the task request. scic_controller_allocate_tag() for more + * information on allocating a tag. Indicate if the controller successfully + * started the IO request. SCI_TASK_SUCCESS if the task request was + * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is + * returned if there is/are task(s) outstanding that require termination or + * completion before this request can succeed. + */ enum sci_task_status scic_controller_start_task( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, @@ -2297,8 +2307,20 @@ enum sci_task_status scic_controller_start_task( return status; } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_complete_task() - This method will perform core specific + * completion operations for task management request. After this method is + * invoked, the user should consider the task request as invalid until it is + * properly reused (i.e. re-constructed). + * @controller: The handle to the controller object for which to complete the + * task management request. + * @remote_device: The handle to the remote device object for which to complete + * the task management request. + * @task_request: the handle to the task management request object to complete. + * + * Indicate if the controller successfully completed the task management + * request. SCI_SUCCESS if the completion process was successful. + */ enum sci_status scic_controller_complete_task( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, @@ -2325,8 +2347,22 @@ enum sci_status scic_controller_complete_task( } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_get_port_handle() - This method simply provides the user + * with a unique handle for a given SAS/SATA core port index. + * @controller: This parameter represents the handle to the controller object + * from which to retrieve a port (SAS or SATA) handle. + * @port_index: This parameter specifies the port index in the controller for + * which to retrieve the port handle. 0 <= port_index < maximum number of + * phys. + * @port_handle: This parameter specifies the retrieved port handle to be + * provided to the caller. + * + * Indicate if the retrieval of the port handle was successful. SCI_SUCCESS + * This value is returned if the retrieval was successful. + * SCI_FAILURE_INVALID_PORT This value is returned if the supplied port id is + * not in the supported range. + */ enum sci_status scic_controller_get_port_handle( struct scic_sds_controller *scic, u8 port_index, @@ -2341,8 +2377,20 @@ enum sci_status scic_controller_get_port_handle( return SCI_FAILURE_INVALID_PORT; } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_get_phy_handle() - This method simply provides the user with + * a unique handle for a given SAS/SATA phy index/identifier. + * @controller: This parameter represents the handle to the controller object + * from which to retrieve a phy (SAS or SATA) handle. + * @phy_index: This parameter specifies the phy index in the controller for + * which to retrieve the phy handle. 0 <= phy_index < maximum number of phys. + * @phy_handle: This parameter specifies the retrieved phy handle to be + * provided to the caller. + * + * Indicate if the retrieval of the phy handle was successful. SCI_SUCCESS This + * value is returned if the retrieval was successful. SCI_FAILURE_INVALID_PHY + * This value is returned if the supplied phy id is not in the supported range. + */ enum sci_status scic_controller_get_phy_handle( struct scic_sds_controller *scic, u8 phy_index, @@ -2361,8 +2409,28 @@ enum sci_status scic_controller_get_phy_handle( return SCI_FAILURE_INVALID_PHY; } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_allocate_io_tag() - This method will allocate a tag from the + * pool of free IO tags. Direct allocation of IO tags by the SCI Core user + * is optional. The scic_controller_start_io() method will allocate an IO + * tag if this method is not utilized and the tag is not supplied to the IO + * construct routine. Direct allocation of IO tags may provide additional + * performance improvements in environments capable of supporting this usage + * model. Additionally, direct allocation of IO tags also provides + * additional flexibility to the SCI Core user. Specifically, the user may + * retain IO tags across the lives of multiple IO requests. + * @controller: the handle to the controller object for which to allocate the + * tag. + * + * IO tags are a protected resource. It is incumbent upon the SCI Core user to + * ensure that each of the methods that may allocate or free available IO tags + * are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). An unsigned integer representing an available IO tag. + * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no + * currently available tags to be allocated. All return other values indicate a + * legitimate tag. + */ u16 scic_controller_allocate_io_tag( struct scic_sds_controller *scic) { @@ -2380,8 +2448,31 @@ u16 scic_controller_allocate_io_tag( return SCI_CONTROLLER_INVALID_IO_TAG; } -/* --------------------------------------------------------------------------- */ - +/** + * scic_controller_free_io_tag() - This method will free an IO tag to the pool + * of free IO tags. This method provides the SCI Core user more flexibility + * with regards to IO tags. The user may desire to keep an IO tag after an + * IO request has completed, because they plan on re-using the tag for a + * subsequent IO request. This method is only legal if the tag was + * allocated via scic_controller_allocate_io_tag(). + * @controller: This parameter specifies the handle to the controller object + * for which to free/return the tag. + * @io_tag: This parameter represents the tag to be freed to the pool of + * available tags. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI + * Core user, using the scic_controller_allocate_io_tag() method, then it is + * the responsibility of the caller to invoke this method to free the tag. This + * method returns an indication of whether the tag was successfully put back + * (freed) to the pool of available tags. SCI_SUCCESS This return value + * indicates the tag was successfully placed into the pool of available IO + * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag + * is not a valid IO tag value. + */ enum sci_status scic_controller_free_io_tag( struct scic_sds_controller *scic, u16 io_tag) @@ -2408,8 +2499,6 @@ enum sci_status scic_controller_free_io_tag( return SCI_FAILURE_INVALID_IO_TAG; } -/* --------------------------------------------------------------------------- */ - void scic_controller_enable_interrupts( struct scic_sds_controller *scic) { @@ -2417,8 +2506,6 @@ void scic_controller_enable_interrupts( SMU_IMR_WRITE(scic, 0x00000000); } -/* --------------------------------------------------------------------------- */ - void scic_controller_disable_interrupts( struct scic_sds_controller *scic) { @@ -2426,9 +2513,7 @@ void scic_controller_disable_interrupts( SMU_IMR_WRITE(scic, 0xffffffff); } -/* --------------------------------------------------------------------------- */ - -enum sci_status scic_controller_set_mode( +static enum sci_status scic_controller_set_mode( struct scic_sds_controller *scic, enum sci_controller_mode operating_mode) { @@ -2476,7 +2561,7 @@ enum sci_status scic_controller_set_mode( * * This method will reset the controller hardware. */ -void scic_sds_controller_reset_hardware( +static void scic_sds_controller_reset_hardware( struct scic_sds_controller *scic) { /* Disable interrupts so we dont take any spurious interrupts */ @@ -2495,8 +2580,6 @@ void scic_sds_controller_reset_hardware( SCU_UFQGP_WRITE(scic, 0x00000000); } -/* --------------------------------------------------------------------------- */ - enum sci_status scic_user_parameters_set( struct scic_sds_controller *scic, union scic_user_parameters *scic_parms) @@ -2551,17 +2634,6 @@ enum sci_status scic_user_parameters_set( return SCI_FAILURE_INVALID_STATE; } -/* --------------------------------------------------------------------------- */ - -void scic_user_parameters_get( - struct scic_sds_controller *scic, - union scic_user_parameters *scic_parms) -{ - memcpy(scic_parms, (&scic->user_parameters), sizeof(*scic_parms)); -} - -/* --------------------------------------------------------------------------- */ - enum sci_status scic_oem_parameters_set( struct scic_sds_controller *scic, union scic_oem_parameters *scic_parms) @@ -2616,8 +2688,6 @@ enum sci_status scic_oem_parameters_set( return SCI_FAILURE_INVALID_STATE; } -/* --------------------------------------------------------------------------- */ - void scic_oem_parameters_get( struct scic_sds_controller *scic, union scic_oem_parameters *scic_parms) @@ -2625,9 +2695,6 @@ void scic_oem_parameters_get( memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); } -/* --------------------------------------------------------------------------- */ - - #define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 #define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280 #define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000 @@ -2635,7 +2702,24 @@ void scic_oem_parameters_get( #define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7 #define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 -enum sci_status scic_controller_set_interrupt_coalescence( +/** + * scic_controller_set_interrupt_coalescence() - This method allows the user to + * configure the interrupt coalescence. + * @controller: This parameter represents the handle to the controller object + * for which its interrupt coalesce register is overridden. + * @coalesce_number: Used to control the number of entries in the Completion + * Queue before an interrupt is generated. If the number of entries exceed + * this number, an interrupt will be generated. The valid range of the input + * is [0, 256]. A setting of 0 results in coalescing being disabled. + * @coalesce_timeout: Timeout value in microseconds. The valid range of the + * input is [0, 2700000] . A setting of 0 is allowed and results in no + * interrupt coalescing timeout. + * + * Indicate if the user successfully set the interrupt coalesce parameters. + * SCI_SUCCESS The user successfully updated the interrutp coalescence. + * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. + */ +static enum sci_status scic_controller_set_interrupt_coalescence( struct scic_sds_controller *scic_controller, u32 coalesce_number, u32 coalesce_timeout) @@ -3419,7 +3503,7 @@ static enum sci_status scic_sds_controller_stopping_state_complete_io_handler( * This method is called when the struct scic_sds_controller is in a stopping state * and the remote device has stopped. **/ -void scic_sds_controller_stopping_state_device_stopped_handler( +static void scic_sds_controller_stopping_state_device_stopped_handler( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device ) @@ -3638,7 +3722,7 @@ static void scic_sds_controller_resetting_state_enter(struct sci_base_object *ob SCI_BASE_CONTROLLER_STATE_RESET); } -const struct sci_base_state scic_sds_controller_state_table[] = { +static const struct sci_base_state scic_sds_controller_state_table[] = { [SCI_BASE_CONTROLLER_STATE_INITIAL] = { .enter_state = scic_sds_controller_initial_state_enter, }, @@ -3662,3 +3746,64 @@ const struct sci_base_state scic_sds_controller_state_table[] = { [SCI_BASE_CONTROLLER_STATE_STOPPED] = {}, [SCI_BASE_CONTROLLER_STATE_FAILED] = {} }; + +/** + * scic_controller_construct() - This method will attempt to construct a + * controller object utilizing the supplied parameter information. + * @c: This parameter specifies the controller to be constructed. + * @scu_base: mapped base address of the scu registers + * @smu_base: mapped base address of the smu registers + * + * Indicate if the controller was successfully constructed or if it failed in + * some way. SCI_SUCCESS This value is returned if the controller was + * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned + * if the interrupt coalescence timer may cause SAS compliance issues for SMP + * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE + * This value is returned if the controller does not support the supplied type. + * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the + * controller does not support the supplied initialization data version. + */ +enum sci_status scic_controller_construct(struct scic_sds_controller *scic, + void __iomem *scu_base, + void __iomem *smu_base) +{ + u8 i; + + sci_base_controller_construct(&scic->parent, + scic_sds_controller_state_table, + scic->memory_descriptors, + ARRAY_SIZE(scic->memory_descriptors), NULL); + + scic->scu_registers = scu_base; + scic->smu_registers = smu_base; + + scic_sds_port_configuration_agent_construct(&scic->port_agent); + + /* Construct the ports for this controller */ + for (i = 0; i < SCI_MAX_PORTS; i++) + scic_sds_port_construct(&scic->port_table[i], i, scic); + scic_sds_port_construct(&scic->port_table[i], SCIC_SDS_DUMMY_PORT, scic); + + /* Construct the phys for this controller */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + /* Add all the PHYs to the dummy port */ + scic_sds_phy_construct(&scic->phy_table[i], + &scic->port_table[SCI_MAX_PORTS], i); + } + + scic->invalid_phy_mask = 0; + + /* Set the default maximum values */ + scic->completion_event_entries = SCU_EVENT_COUNT; + scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; + scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; + scic->logical_port_entries = SCI_MAX_PORTS; + scic->task_context_entries = SCU_IO_REQUEST_COUNT; + scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT; + scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT; + + /* Initialize the User and OEM parameters to default values. */ + scic_sds_controller_set_default_config_parameters(scic); + + return scic_controller_reset(scic); +} diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index aa2698b..fedf503 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -402,7 +402,6 @@ struct scic_sds_controller_state_handler { extern const struct scic_sds_controller_state_handler scic_sds_controller_state_handler_table[]; -extern const struct sci_base_state scic_sds_controller_state_table[]; /** * INCREMENT_QUEUE_GET() - @@ -535,7 +534,6 @@ extern const struct sci_base_state scic_sds_controller_state_table[]; /* --------------------------------------------------------------------------- */ -u32 scic_sds_controller_get_object_size(void); /* --------------------------------------------------------------------------- */ @@ -615,8 +613,6 @@ void scic_sds_controller_link_down( * * CORE CONTROLLER REMOTE DEVICE MESSAGE PROCESSING * ***************************************************************************** */ -bool scic_sds_controller_has_remote_devices_stopping( - struct scic_sds_controller *this_controller); void scic_sds_controller_remote_device_started( struct scic_sds_controller *this_controller, @@ -626,67 +622,11 @@ void scic_sds_controller_remote_device_stopped( struct scic_sds_controller *this_controller, struct scic_sds_remote_device *the_device); - -/* - * ***************************************************************************** - * * CORE CONTROLLER PRIVATE METHODS - * ***************************************************************************** */ - -enum sci_status scic_sds_controller_validate_memory_descriptor_table( - struct scic_sds_controller *this_controller); - -void scic_sds_controller_ram_initialization( - struct scic_sds_controller *this_controller); - -void scic_sds_controller_assign_task_entries( - struct scic_sds_controller *this_controller); - -void scic_sds_controller_afe_initialization( - struct scic_sds_controller *this_controller); - -void scic_sds_controller_enable_port_task_scheduler( - struct scic_sds_controller *this_controller); - -void scic_sds_controller_initialize_completion_queue( - struct scic_sds_controller *this_controller); - -void scic_sds_controller_initialize_unsolicited_frame_queue( - struct scic_sds_controller *this_controller); - -void scic_sds_controller_phy_timer_stop( - struct scic_sds_controller *this_controller); - -enum sci_status scic_sds_controller_start_next_phy( - struct scic_sds_controller *this_controller); - -enum sci_status scic_sds_controller_stop_phys( - struct scic_sds_controller *this_controller); - -enum sci_status scic_sds_controller_stop_ports( - struct scic_sds_controller *this_controller); - -enum sci_status scic_sds_controller_stop_devices( - struct scic_sds_controller *this_controller); - void scic_sds_controller_copy_task_context( struct scic_sds_controller *this_controller, struct scic_sds_request *this_request); -void scic_sds_controller_timeout_handler(void *controller); - -void scic_sds_controller_initialize_power_control( - struct scic_sds_controller *this_controller); - void scic_sds_controller_register_setup( struct scic_sds_controller *this_controller); -void scic_sds_controller_reset_hardware( - struct scic_sds_controller *this_controller); - -enum sci_status scic_sds_controller_initialize_phy_startup( - struct scic_sds_controller *this_controller); - -void scic_sds_controller_build_memory_descriptor_table( - struct scic_sds_controller *this_controller); - #endif /* _SCIC_SDS_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index e546e20..532338e 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -257,7 +257,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, * restart the starting substate machine since we dont know what has actually * happening. */ -void scic_sds_phy_sata_timeout(void *phy) +static void scic_sds_phy_sata_timeout(void *phy) { struct scic_sds_phy *sci_phy = phy; @@ -274,47 +274,6 @@ void scic_sds_phy_sata_timeout(void *phy) } /** - * This method will construct the struct scic_sds_phy object - * @this_phy: - * @owning_port: - * @phy_index: - * - */ -void scic_sds_phy_construct( - struct scic_sds_phy *this_phy, - struct scic_sds_port *owning_port, - u8 phy_index) -{ - /* - * Call the base constructor first - */ - sci_base_phy_construct( - &this_phy->parent, - scic_sds_phy_state_table - ); - - /* Copy the rest of the input data to our locals */ - this_phy->owning_port = owning_port; - this_phy->phy_index = phy_index; - this_phy->bcn_received_while_port_unassigned = false; - this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; - this_phy->link_layer_registers = NULL; - this_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; - this_phy->sata_timeout_timer = NULL; - - /* Clear out the identification buffer data */ - memset(&this_phy->phy_type, 0, sizeof(this_phy->phy_type)); - - /* Initialize the the substate machines */ - sci_base_state_machine_construct( - &this_phy->starting_substate_machine, - &this_phy->parent.parent, - scic_sds_phy_starting_substates, - SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL - ); -} - -/** * This method returns the port currently containing this phy. If the phy is * currently contained by the dummy port, then the phy is considered to not * be part of a port. @@ -426,7 +385,7 @@ void scic_sds_phy_setup_transport( * This function will perform the register reads/writes to suspend the SCU * hardware protocol engine. none */ -void scic_sds_phy_suspend( +static void scic_sds_phy_suspend( struct scic_sds_phy *this_phy) { u32 scu_sas_pcfg_value; @@ -1416,7 +1375,62 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_p return SCI_SUCCESS; } -const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { +static enum sci_status default_phy_handler(struct sci_base_phy *base_phy, const char *func) +{ + struct scic_sds_phy *sci_phy; + + sci_phy = container_of(base_phy, typeof(*sci_phy), parent); + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&base_phy->state_machine)); + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_phy_default_start_handler(struct sci_base_phy *base_phy) +{ + return default_phy_handler(base_phy, __func__); +} + +static enum sci_status scic_sds_phy_default_stop_handler(struct sci_base_phy *base_phy) +{ + return default_phy_handler(base_phy, __func__); +} + +static enum sci_status scic_sds_phy_default_reset_handler(struct sci_base_phy *base_phy) +{ + return default_phy_handler(base_phy, __func__); +} + +static enum sci_status scic_sds_phy_default_destroy_handler(struct sci_base_phy *base_phy) +{ + return default_phy_handler(base_phy, __func__); +} + +static enum sci_status scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, + u32 frame_index) +{ + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + + default_phy_handler(&sci_phy->parent, __func__); + scic_sds_controller_release_frame(scic, frame_index); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + return default_phy_handler(&sci_phy->parent, __func__); +} + +static enum sci_status scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(&sci_phy->parent, __func__); +} + + + +static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { .parent.start_handler = scic_sds_phy_default_start_handler, .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, @@ -1867,7 +1881,7 @@ static void scic_sds_phy_starting_final_substate_enter(struct sci_base_object *o /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_phy_starting_substates[] = { +static const struct sci_base_state scic_sds_phy_starting_substates[] = { [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { .enter_state = scic_sds_phy_starting_initial_substate_enter, }, @@ -1905,196 +1919,6 @@ const struct sci_base_state scic_sds_phy_starting_substates[] = { } }; -/* - * *************************************************************************** - * * DEFAULT HANDLERS - * *************************************************************************** */ - -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * - * This is the default method for phy a start request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_phy_default_start_handler( - struct sci_base_phy *phy) -{ - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)phy; - - dev_warn(sciphy_to_dev(this_phy), - "%s: SCIC Phy 0x%p requested to start from invalid " - "state %d\n", - __func__, - this_phy, - sci_base_state_machine_get_state( - &this_phy->parent.state_machine)); - - return SCI_FAILURE_INVALID_STATE; - -} - -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a - * struct scic_sds_phy object. - * - * This is the default method for phy a stop request. It will report a warning - * and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_phy_default_stop_handler(struct sci_base_phy *base_phy) -{ - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)base_phy; - - dev_dbg(sciphy_to_dev(sci_phy), - "%s: SCIC Phy 0x%p requested to stop from invalid state %d\n", - __func__, - sci_phy, - sci_base_state_machine_get_state( - &sci_phy->parent.state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * - * This is the default method for phy a reset request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_phy_default_reset_handler( - struct sci_base_phy *phy) -{ - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)phy; - - dev_warn(sciphy_to_dev(this_phy), - "%s: SCIC Phy 0x%p requested to reset from invalid state " - "%d\n", - __func__, - this_phy, - sci_base_state_machine_get_state( - &this_phy->parent.state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * - * This is the default method for phy a destruct request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_phy_default_destroy_handler( - struct sci_base_phy *phy) -{ - struct scic_sds_phy *this_phy; - - this_phy = (struct scic_sds_phy *)phy; - - /* / @todo Implement something for the default */ - dev_warn(sciphy_to_dev(this_phy), - "%s: SCIC Phy 0x%p requested to destroy from invalid " - "state %d\n", - __func__, - this_phy, - sci_base_state_machine_get_state( - &this_phy->parent.state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * @frame_index: This is the frame index that was received from the SCU - * hardware. - * - * This is the default method for a phy frame handling request. It will report - * a warning, release the frame and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_phy_default_frame_handler( - struct scic_sds_phy *this_phy, - u32 frame_index) -{ - dev_warn(sciphy_to_dev(this_phy), - "%s: SCIC Phy 0x%p received unexpected frame data %d " - "while in state %d\n", - __func__, - this_phy, - frame_index, - sci_base_state_machine_get_state( - &this_phy->parent.state_machine)); - - scic_sds_controller_release_frame( - scic_sds_phy_get_controller(this_phy), frame_index); - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * @event_code: This is the event code that was received from the SCU hardware. - * - * This is the default method for a phy event handler. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_phy_default_event_handler( - struct scic_sds_phy *this_phy, - u32 event_code) -{ - dev_dbg(sciphy_to_dev(this_phy), - "%s: SCIC Phy 0x%p received unexpected event status %x " - "while in state %d\n", - __func__, - this_phy, - event_code, - sci_base_state_machine_get_state( - &this_phy->parent.state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * - * This is the default method for a phy consume power handler. It will report - * a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_phy_default_consume_power_handler( - struct scic_sds_phy *this_phy) -{ - dev_warn(sciphy_to_dev(this_phy), - "%s: SCIC Phy 0x%p given unexpected permission to consume " - "power while in state %d\n", - __func__, - this_phy, - sci_base_state_machine_get_state( - &this_phy->parent.state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/* - * ****************************************************************************** - * * PHY STOPPED STATE HANDLERS - * ****************************************************************************** */ - /** * * @phy: This is the struct sci_base_phy object which is cast into a @@ -2219,7 +2043,7 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sd /* --------------------------------------------------------------------------- */ -const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { +static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { .parent.start_handler = scic_sds_phy_default_start_handler, .parent.stop_handler = scic_sds_phy_default_stop_handler, @@ -2563,7 +2387,7 @@ static void scic_sds_phy_final_state_enter( /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_phy_state_table[] = { +static const struct sci_base_state scic_sds_phy_state_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { .enter_state = scic_sds_phy_initial_state_enter, }, @@ -2585,3 +2409,29 @@ const struct sci_base_state scic_sds_phy_state_table[] = { }, }; +void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, + struct scic_sds_port *owning_port, u8 phy_index) +{ + /* + * Call the base constructor first + */ + sci_base_phy_construct(&sci_phy->parent, scic_sds_phy_state_table); + + /* Copy the rest of the input data to our locals */ + sci_phy->owning_port = owning_port; + sci_phy->phy_index = phy_index; + sci_phy->bcn_received_while_port_unassigned = false; + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + sci_phy->link_layer_registers = NULL; + sci_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; + sci_phy->sata_timeout_timer = NULL; + + /* Clear out the identification buffer data */ + memset(&sci_phy->phy_type, 0, sizeof(sci_phy->phy_type)); + + /* Initialize the the substate machines */ + sci_base_state_machine_construct(&sci_phy->starting_substate_machine, + &sci_phy->parent.parent, + scic_sds_phy_starting_substates, + SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); +} diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index af9e24c..4745a79 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -293,12 +293,6 @@ struct scic_sds_phy_state_handler { }; -extern const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[]; -extern const struct sci_base_state scic_sds_phy_state_table[]; -extern const struct sci_base_state scic_sds_phy_starting_substates[]; -extern const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[]; - - /** * scic_sds_phy_get_index() - * @@ -362,12 +356,6 @@ enum sci_status scic_sds_phy_stop( enum sci_status scic_sds_phy_reset( struct scic_sds_phy *this_phy); -void scic_sds_phy_sata_timeout( - void *cookie); - -void scic_sds_phy_suspend( - struct scic_sds_phy *this_phy); - void scic_sds_phy_resume( struct scic_sds_phy *this_phy); @@ -402,27 +390,4 @@ void scic_sds_phy_get_attached_phy_protocols( struct scic_sds_phy *this_phy, struct sci_sas_identify_address_frame_protocols *protocols); -enum sci_status scic_sds_phy_default_start_handler( - struct sci_base_phy *phy); - -enum sci_status scic_sds_phy_default_stop_handler( - struct sci_base_phy *phy); - -enum sci_status scic_sds_phy_default_reset_handler( - struct sci_base_phy *phy); - -enum sci_status scic_sds_phy_default_destroy_handler( - struct sci_base_phy *phy); - -enum sci_status scic_sds_phy_default_frame_handler( - struct scic_sds_phy *phy, - u32 frame_index); - -enum sci_status scic_sds_phy_default_event_handler( - struct scic_sds_phy *phy, - u32 evnet_code); - -enum sci_status scic_sds_phy_default_consume_power_handler( - struct scic_sds_phy *phy); - #endif /* _SCIC_SDS_PHY_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 72b815e..0a95f64 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -69,19 +69,13 @@ #include "sci_environment.h" #include "scic_sds_controller_registers.h" - -static void scic_sds_port_invalid_link_up( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy); -static void scic_sds_port_timeout_handler( - void *port); #define SCIC_SDS_PORT_MIN_TIMER_COUNT (SCI_MAX_PORTS) #define SCIC_SDS_PORT_MAX_TIMER_COUNT (SCI_MAX_PORTS) #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) #define SCU_DUMMY_INDEX (0xFFFF) -void sci_base_port_construct( +static void sci_base_port_construct( struct sci_base_port *base_port, const struct sci_base_state *state_table) { @@ -168,7 +162,7 @@ bool scic_sds_port_is_valid_phy_assignment( * Return a bit mask indicating which phys are a part of this port. Each bit * corresponds to a phy identifier (e.g. bit 0 = phy id 0). */ -u32 scic_sds_port_get_phys(struct scic_sds_port *this_port) +static u32 scic_sds_port_get_phys(struct scic_sds_port *this_port) { u32 index; u32 mask; @@ -196,7 +190,7 @@ u32 scic_sds_port_get_phys(struct scic_sds_port *this_port) * phy mask can be supported. true if this is a valid phy assignment for the * port false if this is not a valid phy assignment for the port */ -bool scic_sds_port_is_phy_mask_valid( +static bool scic_sds_port_is_phy_mask_valid( struct scic_sds_port *this_port, u32 phy_mask) { @@ -269,7 +263,7 @@ static struct scic_sds_phy *scic_sds_port_get_a_connected_phy( * is a functional test that only fails if the phy is currently assigned to a * different port. */ -enum sci_status scic_sds_port_set_phy( +static enum sci_status scic_sds_port_set_phy( struct scic_sds_port *port, struct scic_sds_phy *phy) { @@ -304,7 +298,7 @@ enum sci_status scic_sds_port_set_phy( * this phy is not currently assinged to this port. bool true if the phy is * removed from the port. false if this phy is not assined to this port. */ -enum sci_status scic_sds_port_clear_phy( +static enum sci_status scic_sds_port_clear_phy( struct scic_sds_port *port, struct scic_sds_phy *phy) { @@ -485,7 +479,7 @@ void scic_sds_port_get_attached_protocols( * This structure will be posted to the hardware to work around a scheduler * error in the hardware. */ -void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni) +static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni) { union scu_remote_node_context *rnc; @@ -520,7 +514,7 @@ void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni) * in the hardware. * */ -void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci) +static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci) { struct scu_task_context *task_context; @@ -554,7 +548,7 @@ void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci) task_context->task_phase = 0x01; } -void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port) +static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; @@ -569,38 +563,6 @@ void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port) sci_port->reserved_tci = SCU_DUMMY_INDEX; } -void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, - struct scic_sds_controller *scic) -{ - u32 index; - - sci_base_port_construct(&sci_port->parent, scic_sds_port_state_table); - - sci_base_state_machine_construct(&sci_port->ready_substate_machine, - &sci_port->parent.parent, - scic_sds_port_ready_substate_table, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); - - sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; - sci_port->physical_port_index = port_index; - sci_port->active_phy_mask = 0; - - sci_port->owning_controller = scic; - - sci_port->started_request_count = 0; - sci_port->assigned_device_count = 0; - - sci_port->reserved_rni = SCU_DUMMY_INDEX; - sci_port->reserved_tci = SCU_DUMMY_INDEX; - - sci_port->timer_handle = NULL; - - sci_port->port_task_scheduler_registers = NULL; - - for (index = 0; index < SCI_MAX_PHYS; index++) - sci_port->phy_table[index] = NULL; -} - /** * This method performs initialization of the supplied port. Initialization * includes: - state machine initialization - member variable initialization @@ -627,61 +589,18 @@ enum sci_status scic_sds_port_initialize( } /** + * scic_port_get_properties() - This method simply returns the properties + * regarding the port, such as: physical index, protocols, sas address, etc. + * @port: this parameter specifies the port for which to retrieve the physical + * index. + * @properties: This parameter specifies the properties structure into which to + * copy the requested information. * - * @this_port: This is the struct scic_sds_port object for which has a phy that has - * gone link up. - * @the_phy: This is the struct scic_sds_phy object that has gone link up. - * @do_notify_user: This parameter specifies whether to inform the user (via - * scic_cb_port_link_up()) as to the fact that a new phy as become ready. - * - * This method is the a general link up handler for the struct scic_sds_port object. - * This function will determine if this struct scic_sds_phy can be assigned to this - * struct scic_sds_port object. If the struct scic_sds_phy object can is not a valid PHY for - * this port then the function will notify the SCIC_USER. A PHY can only be - * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in - * the same port. none + * Indicate if the user specified a valid port. SCI_SUCCESS This value is + * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This + * value is returned if the specified port is not valid. When this value is + * returned, no data is copied to the properties output parameter. */ -void scic_sds_port_general_link_up_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy, - bool do_notify_user) -{ - struct sci_sas_address port_sas_address; - struct sci_sas_address phy_sas_address; - - scic_sds_port_get_attached_sas_address(this_port, &port_sas_address); - scic_sds_phy_get_attached_sas_address(the_phy, &phy_sas_address); - - /* - * If the SAS address of the new phy matches the SAS address of - * other phys in the port OR this is the first phy in the port, - * then activate the phy and allow it to be used for operations - * in this port. */ - if ( - ( - (phy_sas_address.high == port_sas_address.high) - && (phy_sas_address.low == port_sas_address.low) - ) - || (this_port->active_phy_mask == 0) - ) { - scic_sds_port_activate_phy(this_port, the_phy, do_notify_user); - - if (this_port->parent.state_machine.current_state_id - == SCI_BASE_PORT_STATE_RESETTING) { - sci_base_state_machine_change_state( - &this_port->parent.state_machine, SCI_BASE_PORT_STATE_READY - ); - } - } else { - scic_sds_port_invalid_link_up(this_port, the_phy); - } -} - -enum sci_status scic_port_stop(struct scic_sds_port *port) -{ - return port->state_handlers->parent.stop_handler(&port->parent); -} - enum sci_status scic_port_get_properties( struct scic_sds_port *port, struct scic_port_properties *prop) @@ -700,7 +619,20 @@ enum sci_status scic_port_get_properties( return SCI_SUCCESS; } - +/** + * scic_port_hard_reset() - This method will request the SCI implementation to + * perform a HARD RESET on the SAS Port. If/When the HARD RESET completes + * the SCI user will be notified via an SCI OS callback indicating a direct + * attached device was found. + * @port: a handle corresponding to the SAS port to be hard reset. + * @reset_timeout: This parameter specifies the number of milliseconds in which + * the port reset operation should complete. + * + * The SCI User callback in SCIC_USER_CALLBACKS_T will only be called once for + * each phy in the SAS Port at completion of the hard reset sequence. Return a + * status indicating whether the hard reset started successfully. SCI_SUCCESS + * This value is returned if the hard reset operation started successfully. + */ enum sci_status scic_port_hard_reset( struct scic_sds_port *port, u32 reset_timeout) @@ -741,12 +673,11 @@ void scic_sds_port_setup_transports( * the phy to the port - enabling the Protocol Engine in the silicon. - * notifying the user that the link is up. none */ -void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, - bool do_notify_user) +static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, + bool do_notify_user) { - struct scic_sds_controller *scic = - scic_sds_port_get_controller(sci_port); + struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct sci_sas_identify_address_frame_protocols protocols; struct isci_host *ihost = sci_object_get_association(scic); @@ -764,22 +695,11 @@ void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, isci_port_link_up(ihost, sci_port, sci_phy); } -/** - * - * @this_port: This is the port on which the phy should be deactivated. - * @the_phy: This is the specific phy that is no longer active in the port. - * @do_notify_user: This parameter specifies whether to inform the user (via - * isci_port_link_down()) as to the fact that a new phy as become - * ready. - * - * This function will deactivate the supplied phy in the port. none - */ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy, bool do_notify_user) { - struct scic_sds_controller *scic = - scic_sds_port_get_controller(sci_port); + struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_port *iport = sci_object_get_association(sci_port); struct isci_host *ihost = sci_object_get_association(scic); struct isci_phy *iphy = sci_object_get_association(sci_phy); @@ -822,6 +742,48 @@ static void scic_sds_port_invalid_link_up( } /** + * scic_sds_port_general_link_up_handler - phy can be assigned to port? + * @sci_port: scic_sds_port object for which has a phy that has gone link up. + * @sci_phy: This is the struct scic_sds_phy object that has gone link up. + * @do_notify_user: This parameter specifies whether to inform the user (via + * scic_cb_port_link_up()) as to the fact that a new phy as become ready. + * + * Determine if this phy can be assigned to this + * port . If the phy is not a valid PHY for + * this port then the function will notify the user. A PHY can only be + * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in + * the same port. none + */ +static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, + bool do_notify_user) +{ + struct sci_sas_address port_sas_address; + struct sci_sas_address phy_sas_address; + + scic_sds_port_get_attached_sas_address(sci_port, &port_sas_address); + scic_sds_phy_get_attached_sas_address(sci_phy, &phy_sas_address); + + /* If the SAS address of the new phy matches the SAS address of + * other phys in the port OR this is the first phy in the port, + * then activate the phy and allow it to be used for operations + * in this port. + */ + if ((phy_sas_address.high == port_sas_address.high && + phy_sas_address.low == port_sas_address.low) || + sci_port->active_phy_mask == 0) { + struct sci_base_state_machine *sm = &sci_port->parent.state_machine; + + scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user); + if (sm->current_state_id == SCI_BASE_PORT_STATE_RESETTING) + sci_base_state_machine_change_state(sm, SCI_BASE_PORT_STATE_READY); + } else + scic_sds_port_invalid_link_up(sci_port, sci_phy); +} + + + +/** * This method returns false if the port only has a single phy object assigned. * If there are no phys or more than one phy then the method will return * true. @@ -1004,7 +966,7 @@ static void scic_sds_port_timeout_handler(void *port) * * */ -void scic_sds_port_update_viit_entry(struct scic_sds_port *this_port) +static void scic_sds_port_update_viit_entry(struct scic_sds_port *this_port) { struct sci_sas_address sas_address; @@ -1483,9 +1445,106 @@ static enum sci_status scic_sds_port_ready_configuring_substate_complete_io_hand return SCI_SUCCESS; } -/* --------------------------------------------------------------------------- */ +static enum sci_status default_port_handler(struct sci_base_port *base_port, const char *func) +{ + struct scic_sds_port *sci_port; + + sci_port = container_of(base_port, typeof(*sci_port), parent); + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&base_port->state_machine)); + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_port_default_start_handler(struct sci_base_port *base_port) +{ + return default_port_handler(base_port, __func__); +} + +static enum sci_status scic_sds_port_default_stop_handler(struct sci_base_port *base_port) +{ + return default_port_handler(base_port, __func__); +} + +static enum sci_status scic_sds_port_default_destruct_handler(struct sci_base_port *base_port) +{ + return default_port_handler(base_port, __func__); +} + +static enum sci_status scic_sds_port_default_reset_handler(struct sci_base_port *base_port, + u32 timeout) +{ + return default_port_handler(base_port, __func__); +} + +static enum sci_status scic_sds_port_default_add_phy_handler(struct sci_base_port *base_port, + struct sci_base_phy *base_phy) +{ + return default_port_handler(base_port, __func__); +} + +static enum sci_status scic_sds_port_default_remove_phy_handler(struct sci_base_port *base_port, + struct sci_base_phy *base_phy) +{ + return default_port_handler(base_port, __func__); +} + +/** + * scic_sds_port_default_frame_handler + * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port + * object. + * + * This is the default method for a port unsolicited frame request. It will + * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even + * possible to receive an unsolicited frame directed to a port object? It + * seems possible if we implementing virtual functions but until then? + */ +static enum sci_status scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port, + u32 frame_index) +{ + struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); + + default_port_handler(&sci_port->parent, __func__); + scic_sds_controller_release_frame(scic, frame_index); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port, + u32 event_code) +{ + return default_port_handler(&sci_port->parent, __func__); +} + +static void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + default_port_handler(&sci_port->parent, __func__); +} + +static void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + default_port_handler(&sci_port->parent, __func__); +} -struct scic_sds_port_state_handler +static enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + return default_port_handler(&sci_port->parent, __func__); +} + +static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + return default_port_handler(&sci_port->parent, __func__); +} + + + +static struct scic_sds_port_state_handler scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = { /* SCIC_SDS_PORT_READY_SUBSTATE_WAITING */ @@ -1541,7 +1600,6 @@ scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = } }; - /** * scic_sds_port_set_ready_state_handlers() - * @@ -1584,7 +1642,7 @@ static void scic_sds_port_suspend_port_task_scheduler( * ongoing requests. * */ -void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) +static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) { u32 command; struct scu_task_context *task_context; @@ -1609,7 +1667,7 @@ void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) * @sci_port: The port on which the task must be aborted. * */ -void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) +static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; u16 tci = sci_port->reserved_tci; @@ -1801,7 +1859,7 @@ static void scic_sds_port_ready_substate_configuring_exit( /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_port_ready_substate_table[] = { +static const struct sci_base_state scic_sds_port_ready_substate_table[] = { [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { .enter_state = scic_sds_port_ready_substate_waiting_enter, }, @@ -1815,103 +1873,6 @@ const struct sci_base_state scic_sds_port_ready_substate_table[] = { }, }; -static enum sci_status default_port_handler(struct sci_base_port *base_port, const char *func) -{ - struct scic_sds_port *sci_port; - - sci_port = container_of(base_port, typeof(*sci_port), parent); - dev_warn(sciport_to_dev(sci_port), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&base_port->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status scic_sds_port_default_start_handler(struct sci_base_port *base_port) -{ - return default_port_handler(base_port, __func__); -} - -static enum sci_status scic_sds_port_default_stop_handler(struct sci_base_port *base_port) -{ - return default_port_handler(base_port, __func__); -} - -enum sci_status scic_sds_port_default_destruct_handler(struct sci_base_port *base_port) -{ - return default_port_handler(base_port, __func__); -} - -enum sci_status scic_sds_port_default_reset_handler(struct sci_base_port *base_port, - u32 timeout) -{ - return default_port_handler(base_port, __func__); -} - -static enum sci_status scic_sds_port_default_add_phy_handler(struct sci_base_port *base_port, - struct sci_base_phy *base_phy) -{ - return default_port_handler(base_port, __func__); -} - -enum sci_status scic_sds_port_default_remove_phy_handler(struct sci_base_port *base_port, - struct sci_base_phy *base_phy) -{ - return default_port_handler(base_port, __func__); -} - -/** - * scic_sds_port_default_frame_handler - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * - * This is the default method for a port unsolicited frame request. It will - * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even - * possible to receive an unsolicited frame directed to a port object? It - * seems possible if we implementing virtual functions but until then? - */ -enum sci_status scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port, - u32 frame_index) -{ - struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - - default_port_handler(&sci_port->parent, __func__); - scic_sds_controller_release_frame(scic, frame_index); - - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port, - u32 event_code) -{ - return default_port_handler(&sci_port->parent, __func__); -} - -void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - default_port_handler(&sci_port->parent, __func__); -} - -void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - default_port_handler(&sci_port->parent, __func__); -} - -enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return default_port_handler(&sci_port->parent, __func__); -} - -static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return default_port_handler(&sci_port->parent, __func__); -} - /** * * @port: This is the struct scic_sds_port object on which the io request count will @@ -2248,9 +2209,7 @@ static void scic_sds_port_reset_state_link_down_handler( scic_sds_port_deactivate_phy(this_port, phy, false); } -/* --------------------------------------------------------------------------- */ - -struct scic_sds_port_state_handler +static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = { /* SCI_BASE_PORT_STATE_STOPPED */ @@ -2384,7 +2343,7 @@ static void scic_sds_port_disable_port_task_scheduler( scu_port_task_scheduler_write(this_port, control, pts_control_value); } -void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) +static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; u8 phys_index = sci_port->physical_port_index; @@ -2412,7 +2371,7 @@ void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) scic_sds_controller_post_request(scic, command); } -void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) +static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; u8 phys_index = sci_port->physical_port_index; @@ -2639,7 +2598,7 @@ static void scic_sds_port_failed_state_enter(struct sci_base_object *object) /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_port_state_table[] = { +static const struct sci_base_state scic_sds_port_state_table[] = { [SCI_BASE_PORT_STATE_STOPPED] = { .enter_state = scic_sds_port_stopped_state_enter, .exit_state = scic_sds_port_stopped_state_exit @@ -2661,3 +2620,34 @@ const struct sci_base_state scic_sds_port_state_table[] = { } }; +void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, + struct scic_sds_controller *scic) +{ + u32 index; + + sci_base_port_construct(&sci_port->parent, scic_sds_port_state_table); + + sci_base_state_machine_construct(&sci_port->ready_substate_machine, + &sci_port->parent.parent, + scic_sds_port_ready_substate_table, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + + sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; + sci_port->physical_port_index = port_index; + sci_port->active_phy_mask = 0; + + sci_port->owning_controller = scic; + + sci_port->started_request_count = 0; + sci_port->assigned_device_count = 0; + + sci_port->reserved_rni = SCU_DUMMY_INDEX; + sci_port->reserved_tci = SCU_DUMMY_INDEX; + + sci_port->timer_handle = NULL; + + sci_port->port_task_scheduler_registers = NULL; + + for (index = 0; index < SCI_MAX_PHYS; index++) + sci_port->phy_table[index] = NULL; +} diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index ac81a92..8167f5e 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -236,12 +236,6 @@ struct scic_sds_port_state_handler { }; -extern const struct sci_base_state scic_sds_port_state_table[]; -extern const struct sci_base_state scic_sds_port_ready_substate_table[]; - -extern struct scic_sds_port_state_handler scic_sds_port_state_handler_table[]; -extern struct scic_sds_port_state_handler scic_sds_port_ready_substate_handler_table[]; - /** * scic_sds_port_get_controller() - * @@ -351,10 +345,6 @@ void scic_sds_port_setup_transports( struct scic_sds_port *this_port, u32 device_id); -void scic_sds_port_activate_phy( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy, - bool do_notify_user); void scic_sds_port_deactivate_phy( struct scic_sds_port *this_port, @@ -363,10 +353,6 @@ void scic_sds_port_deactivate_phy( -void scic_sds_port_general_link_up_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy, - bool do_notify_user); bool scic_sds_port_link_detected( struct scic_sds_port *this_port, @@ -397,47 +383,19 @@ enum sci_status scic_sds_port_complete_io( /* --------------------------------------------------------------------------- */ -void scic_sds_port_update_viit_entry( - struct scic_sds_port *this_port); /* --------------------------------------------------------------------------- */ -enum sci_status scic_sds_port_default_start_handler( - struct sci_base_port *port); -enum sci_status scic_sds_port_default_destruct_handler( - struct sci_base_port *port); -enum sci_status scic_sds_port_default_reset_handler( - struct sci_base_port *port, - u32 timeout); -enum sci_status scic_sds_port_default_remove_phy_handler( - struct sci_base_port *port, - struct sci_base_phy *phy); -enum sci_status scic_sds_port_default_frame_handler( - struct scic_sds_port *port, - u32 frame_index); -enum sci_status scic_sds_port_default_event_handler( - struct scic_sds_port *port, - u32 event_code); -void scic_sds_port_default_link_up_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy); -void scic_sds_port_default_link_down_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy); -enum sci_status scic_sds_port_default_start_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request); enum sci_sas_link_rate scic_sds_port_get_max_allowed_speed( @@ -451,12 +409,7 @@ bool scic_sds_port_is_valid_phy_assignment( struct scic_sds_port *this_port, u32 phy_index); -bool scic_sds_port_is_phy_mask_valid( - struct scic_sds_port *this_port, - u32 phy_mask); -u32 scic_sds_port_get_phys( - struct scic_sds_port *this_port); void scic_sds_port_get_sas_address( struct scic_sds_port *this_port, @@ -470,13 +423,7 @@ void scic_sds_port_get_attached_protocols( struct scic_sds_port *this_port, struct sci_sas_identify_address_frame_protocols *protocols); -enum sci_status scic_sds_port_set_phy( - struct scic_sds_port *port, - struct scic_sds_phy *phy); -enum sci_status scic_sds_port_clear_phy( - struct scic_sds_port *port, - struct scic_sds_phy *phy); diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 05599d1..5ab8b03 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -87,30 +87,6 @@ u32 scic_remote_device_get_object_size(void) + sizeof(struct scic_sds_remote_node_context); } -/* --------------------------------------------------------------------------- */ - -void scic_remote_device_construct(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev) -{ - sci_dev->owning_port = sci_port; - sci_dev->started_request_count = 0; - sci_dev->rnc = (struct scic_sds_remote_node_context *) &sci_dev[1]; - - sci_base_remote_device_construct( - &sci_dev->parent, - scic_sds_remote_device_state_table - ); - - scic_sds_remote_node_context_construct( - sci_dev, - sci_dev->rnc, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX - ); - - sci_object_set_association(sci_dev->rnc, sci_dev); -} - - enum sci_status scic_remote_device_da_construct( struct scic_sds_remote_device *sci_dev) { @@ -1330,7 +1306,7 @@ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_h /* --------------------------------------------------------------------------- */ -const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { +static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { .parent.start_handler = scic_sds_remote_device_default_start_handler, .parent.stop_handler = scic_sds_remote_device_default_stop_handler, @@ -1741,7 +1717,7 @@ static void scic_sds_remote_device_final_state_enter( /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_remote_device_state_table[] = { +static const struct sci_base_state scic_sds_remote_device_state_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { .enter_state = scic_sds_remote_device_initial_state_enter, }, @@ -1771,3 +1747,23 @@ const struct sci_base_state scic_sds_remote_device_state_table[] = { }, }; +void scic_remote_device_construct(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev) +{ + sci_dev->owning_port = sci_port; + sci_dev->started_request_count = 0; + sci_dev->rnc = (struct scic_sds_remote_node_context *) &sci_dev[1]; + + sci_base_remote_device_construct( + &sci_dev->parent, + scic_sds_remote_device_state_table + ); + + scic_sds_remote_node_context_construct( + sci_dev, + sci_dev->rnc, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX + ); + + sci_object_set_association(sci_dev->rnc, sci_dev); +} diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index aa46624..725c058 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -316,15 +316,10 @@ struct scic_sds_remote_device_state_handler { scic_sds_remote_device_frame_handler_t frame_handler; }; -extern const struct sci_base_state scic_sds_remote_device_state_table[]; extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[]; extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[]; extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; -extern const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[]; -extern const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[]; -extern const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[]; - /** * scic_sds_remote_device_increment_request_count() - * diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/core/scic_sds_remote_node_context.c index 253b2d8..81e4ab3 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.c +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.c @@ -64,26 +64,6 @@ #include "scu_event_codes.h" #include "scu_task_context.h" -void scic_sds_remote_node_context_construct( - struct scic_sds_remote_device *device, - struct scic_sds_remote_node_context *rnc, - u16 remote_node_index) -{ - memset(rnc, 0, sizeof(struct scic_sds_remote_node_context)); - - rnc->remote_node_index = remote_node_index; - rnc->device = device; - rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - - sci_base_state_machine_construct( - &rnc->state_machine, - &rnc->parent, - scic_sds_remote_node_context_state_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE - ); - - sci_base_state_machine_start(&rnc->state_machine); -} /** * @@ -124,7 +104,7 @@ bool scic_sds_remote_node_context_is_ready( * * This method will construct the RNC buffer for this remote device object. none */ -void scic_sds_remote_node_context_construct_buffer( +static void scic_sds_remote_node_context_construct_buffer( struct scic_sds_remote_node_context *this_rnc) { union scu_remote_node_context *rnc; @@ -830,7 +810,7 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_event /* --------------------------------------------------------------------------- */ -struct scic_sds_remote_node_context_handlers +static struct scic_sds_remote_node_context_handlers scic_sds_remote_node_context_state_handler_table[ SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES] = { @@ -1218,7 +1198,7 @@ static void scic_sds_remote_node_context_await_suspension_state_enter( /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_remote_node_context_state_table[] = { +static const struct sci_base_state scic_sds_remote_node_context_state_table[] = { [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { .enter_state = scic_sds_remote_node_context_initial_state_enter, }, @@ -1245,3 +1225,23 @@ const struct sci_base_state scic_sds_remote_node_context_state_table[] = { }, }; +void scic_sds_remote_node_context_construct( + struct scic_sds_remote_device *device, + struct scic_sds_remote_node_context *rnc, + u16 remote_node_index) +{ + memset(rnc, 0, sizeof(struct scic_sds_remote_node_context)); + + rnc->remote_node_index = remote_node_index; + rnc->device = device; + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + sci_base_state_machine_construct( + &rnc->state_machine, + &rnc->parent, + scic_sds_remote_node_context_state_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE + ); + + sci_base_state_machine_start(&rnc->state_machine); +} diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h index c7c75ae..eccad55 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.h @@ -279,19 +279,11 @@ struct scic_sds_remote_node_context { struct scic_sds_remote_node_context_handlers *state_handlers; }; -extern const struct sci_base_state scic_sds_remote_node_context_state_table[]; - -extern struct scic_sds_remote_node_context_handlers - scic_sds_remote_node_context_state_handler_table[ - SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES]; - void scic_sds_remote_node_context_construct( struct scic_sds_remote_device *device, struct scic_sds_remote_node_context *rnc, u16 remote_node_index); -void scic_sds_remote_node_context_construct_buffer( - struct scic_sds_remote_node_context *rnc); bool scic_sds_remote_node_context_is_ready( struct scic_sds_remote_node_context *this_rnc); diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 4542f4e..45b8571 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -326,59 +326,6 @@ void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) } /** - * This method initializes common portions of the io request object. This - * includes construction of the struct sci_base_request parent. - * @the_controller: This parameter specifies the controller for which the - * request is being constructed. - * @the_target: This parameter specifies the remote device for which the - * request is being constructed. - * @io_tag: This parameter specifies the IO tag to be utilized for this - * request. This parameter can be set to SCI_CONTROLLER_INVALID_IO_TAG. - * @user_io_request_object: This parameter specifies the user request object - * for which the request is being constructed. - * @this_request: This parameter specifies the request being constructed. - * - */ -static void scic_sds_general_request_construct( - struct scic_sds_controller *the_controller, - struct scic_sds_remote_device *the_target, - u16 io_tag, - void *user_io_request_object, - struct scic_sds_request *this_request) -{ - sci_base_request_construct( - &this_request->parent, - scic_sds_request_state_table - ); - - this_request->io_tag = io_tag; - this_request->user_request = user_io_request_object; - this_request->owning_controller = the_controller; - this_request->target_device = the_target; - this_request->has_started_substate_machine = false; - this_request->protocol = SCIC_NO_PROTOCOL; - this_request->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; - this_request->device_sequence = scic_sds_remote_device_get_sequence(the_target); - - this_request->sci_status = SCI_SUCCESS; - this_request->scu_status = 0; - this_request->post_context = 0xFFFFFFFF; - - this_request->is_task_management_request = false; - - if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { - this_request->was_tag_assigned_by_user = false; - this_request->task_context_buffer = NULL; - } else { - this_request->was_tag_assigned_by_user = true; - - this_request->task_context_buffer = - scic_sds_controller_get_task_context_buffer( - this_request->owning_controller, io_tag); - } -} - -/** * This method build the remainder of the IO request object. * @this_request: This parameter specifies the request object being constructed. * @@ -754,16 +701,6 @@ static enum sci_status scic_io_request_construct_sata(struct scic_sds_request *s return status; } -/* - * **************************************************************************** - * * SCIC Interface Implementation - * **************************************************************************** */ - - - - -/* --------------------------------------------------------------------------- */ - u32 scic_io_request_get_object_size(void) { u32 ssp_request_size; @@ -777,128 +714,6 @@ u32 scic_io_request_get_object_size(void) return max(ssp_request_size, max(stp_request_size, smp_request_size)); } -/* --------------------------------------------------------------------------- */ - - -/* --------------------------------------------------------------------------- */ - - -/* --------------------------------------------------------------------------- */ - - -/* --------------------------------------------------------------------------- */ - -enum sci_status scic_io_request_construct( - struct scic_sds_controller *scic_controller, - struct scic_sds_remote_device *scic_remote_device, - u16 io_tag, - void *user_io_request_object, - void *scic_io_request_memory, - struct scic_sds_request **new_scic_io_request_handle) -{ - enum sci_status status = SCI_SUCCESS; - struct scic_sds_request *this_request; - struct smp_discover_response_protocols device_protocol; - - this_request = (struct scic_sds_request *)scic_io_request_memory; - - /* Build the common part of the request */ - scic_sds_general_request_construct( - (struct scic_sds_controller *)scic_controller, - (struct scic_sds_remote_device *)scic_remote_device, - io_tag, - user_io_request_object, - this_request - ); - - if ( - scic_sds_remote_device_get_index((struct scic_sds_remote_device *)scic_remote_device) - == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX - ) { - return SCI_FAILURE_INVALID_REMOTE_DEVICE; - } - - scic_remote_device_get_protocols(scic_remote_device, &device_protocol); - - if (device_protocol.u.bits.attached_ssp_target) { - scic_sds_ssp_io_request_assign_buffers(this_request); - } else if (device_protocol.u.bits.attached_stp_target) { - scic_sds_stp_request_assign_buffers(this_request); - memset(this_request->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); - } else if (device_protocol.u.bits.attached_smp_target) { - scic_sds_smp_request_assign_buffers(this_request); - memset(this_request->command_buffer, 0, sizeof(struct smp_request)); - } else { - status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - } - - if (status == SCI_SUCCESS) { - memset( - this_request->task_context_buffer, - 0, - SCI_FIELD_OFFSET(struct scu_task_context, sgl_pair_ab) - ); - *new_scic_io_request_handle = scic_io_request_memory; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - - -enum sci_status scic_task_request_construct( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - u16 io_tag, - void *user_io_request_object, - void *scic_task_request_memory, - struct scic_sds_request **new_scic_task_request_handle) -{ - enum sci_status status = SCI_SUCCESS; - struct scic_sds_request *this_request = (struct scic_sds_request *) - scic_task_request_memory; - struct smp_discover_response_protocols device_protocol; - - /* Build the common part of the request */ - scic_sds_general_request_construct( - (struct scic_sds_controller *)controller, - (struct scic_sds_remote_device *)remote_device, - io_tag, - user_io_request_object, - this_request - ); - - scic_remote_device_get_protocols(remote_device, &device_protocol); - - if (device_protocol.u.bits.attached_ssp_target) { - scic_sds_ssp_task_request_assign_buffers(this_request); - - this_request->has_started_substate_machine = true; - - /* Construct the started sub-state machine. */ - sci_base_state_machine_construct( - &this_request->started_substate_machine, - &this_request->parent.parent, - scic_sds_io_request_started_task_mgmt_substate_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION - ); - } else if (device_protocol.u.bits.attached_stp_target) { - scic_sds_stp_request_assign_buffers(this_request); - } else { - status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - } - - if (status == SCI_SUCCESS) { - this_request->is_task_management_request = true; - memset(this_request->task_context_buffer, 0x00, sizeof(struct scu_task_context)); - *new_scic_task_request_handle = scic_task_request_memory; - } - - return status; -} - - enum sci_status scic_io_request_construct_basic_ssp( struct scic_sds_request *sci_req) { @@ -1915,9 +1730,7 @@ static enum sci_status scic_sds_request_aborting_state_frame_handler( return SCI_SUCCESS; } -/* --------------------------------------------------------------------------- */ - -const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { +static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_default_abort_handler, @@ -2142,9 +1955,7 @@ static void scic_sds_request_final_state_enter( ); } -/* --------------------------------------------------------------------------- */ - -const struct sci_base_state scic_sds_request_state_table[] = { +static const struct sci_base_state scic_sds_request_state_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { .enter_state = scic_sds_request_initial_state_enter, }, @@ -2166,3 +1977,119 @@ const struct sci_base_state scic_sds_request_state_table[] = { }, }; +static void scic_sds_general_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, + void *user_io_request_object, + struct scic_sds_request *sci_req) +{ + sci_base_request_construct(&sci_req->parent, scic_sds_request_state_table); + sci_req->io_tag = io_tag; + sci_req->user_request = user_io_request_object; + sci_req->owning_controller = scic; + sci_req->target_device = sci_dev; + sci_req->has_started_substate_machine = false; + sci_req->protocol = SCIC_NO_PROTOCOL; + sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; + sci_req->device_sequence = scic_sds_remote_device_get_sequence(sci_dev); + + sci_req->sci_status = SCI_SUCCESS; + sci_req->scu_status = 0; + sci_req->post_context = 0xFFFFFFFF; + + sci_req->is_task_management_request = false; + + if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + sci_req->was_tag_assigned_by_user = false; + sci_req->task_context_buffer = NULL; + } else { + sci_req->was_tag_assigned_by_user = true; + + sci_req->task_context_buffer = + scic_sds_controller_get_task_context_buffer(scic, io_tag); + } +} + +enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, + void *user_io_request_object, + struct scic_sds_request *sci_req, + struct scic_sds_request **new_scic_io_request_handle) +{ + enum sci_status status = SCI_SUCCESS; + struct smp_discover_response_protocols device_protocol; + + /* Build the common part of the request */ + scic_sds_general_request_construct(scic, sci_dev, io_tag, + user_io_request_object, sci_req); + + if (sci_dev->rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + return SCI_FAILURE_INVALID_REMOTE_DEVICE; + + scic_remote_device_get_protocols(sci_dev, &device_protocol); + + if (device_protocol.u.bits.attached_ssp_target) { + scic_sds_ssp_io_request_assign_buffers(sci_req); + } else if (device_protocol.u.bits.attached_stp_target) { + scic_sds_stp_request_assign_buffers(sci_req); + memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); + } else if (device_protocol.u.bits.attached_smp_target) { + scic_sds_smp_request_assign_buffers(sci_req); + memset(sci_req->command_buffer, 0, sizeof(struct smp_request)); + } else { + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + } + + if (status == SCI_SUCCESS) { + memset(sci_req->task_context_buffer, 0, + SCI_FIELD_OFFSET(struct scu_task_context, sgl_pair_ab)); + *new_scic_io_request_handle = sci_req; + } + + return status; +} + +enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, + void *user_io_request_object, + struct scic_sds_request *sci_req, + struct scic_sds_request **new_sci_req) +{ + enum sci_status status = SCI_SUCCESS; + struct smp_discover_response_protocols device_protocol; + + /* Build the common part of the request */ + scic_sds_general_request_construct(scic, sci_dev, io_tag, + user_io_request_object, + sci_req); + + scic_remote_device_get_protocols(sci_dev, &device_protocol); + + if (device_protocol.u.bits.attached_ssp_target) { + scic_sds_ssp_task_request_assign_buffers(sci_req); + + sci_req->has_started_substate_machine = true; + + /* Construct the started sub-state machine. */ + sci_base_state_machine_construct( + &sci_req->started_substate_machine, + &sci_req->parent.parent, + scic_sds_io_request_started_task_mgmt_substate_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION + ); + } else if (device_protocol.u.bits.attached_stp_target) { + scic_sds_stp_request_assign_buffers(sci_req); + } else { + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + } + + if (status == SCI_SUCCESS) { + sci_req->is_task_management_request = true; + memset(sci_req->task_context_buffer, 0, sizeof(struct scu_task_context)); + *new_sci_req = sci_req; + } + + return status; +} diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 06b53c3..c54d8ef 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -256,14 +256,7 @@ struct scic_sds_io_request_state_handler { }; -extern const struct sci_base_state scic_sds_request_state_table[]; -extern const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[]; - extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[]; -extern const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[]; - -extern const struct sci_base_state scic_sds_smp_request_started_substate_table[]; -extern const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[]; /** * diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index fb832ef..5520248 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -207,7 +207,7 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl /* --------------------------------------------------------------------------- */ -const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[] = { +static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[] = { [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .parent.start_handler = scic_sds_remote_device_default_start_handler, .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 962bd39..84b0fdd 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -142,73 +142,6 @@ void scic_sds_smp_request_assign_buffers( } } -/** - * This method is called by the SCI user to build an SMP IO request. - * - * - The user must have previously called scic_io_request_construct() on the - * supplied IO request. Indicate if the controller successfully built the IO - * request. SCI_SUCCESS This value is returned if the IO request was - * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned - * if the remote_device does not support the SMP protocol. - * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not - * properly set the association between the SCIC IO request and the user's IO - * request. Please refer to the sci_object_set_association() routine for more - * information. - */ -enum sci_status scic_io_request_construct_smp( - struct scic_sds_request *sci_req) -{ - struct smp_request *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); - - if (!smp_req) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - - sci_req->protocol = SCIC_SMP_PROTOCOL; - sci_req->has_started_substate_machine = true; - - /* Construct the started sub-state machine. */ - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - &sci_req->parent.parent, - scic_sds_smp_request_started_substate_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE - ); - - /* Construct the SMP SCU Task Context */ - memcpy(smp_req, sci_req->command_buffer, sizeof(*smp_req)); - - /* - * Look at the SMP requests' header fields; for certain SAS 1.x SMP - * functions under SAS 2.0, a zero request length really indicates - * a non-zero default length. */ - if (smp_req->header.request_length == 0) { - switch (smp_req->header.function) { - case SMP_FUNCTION_DISCOVER: - case SMP_FUNCTION_REPORT_PHY_ERROR_LOG: - case SMP_FUNCTION_REPORT_PHY_SATA: - case SMP_FUNCTION_REPORT_ROUTE_INFORMATION: - smp_req->header.request_length = 2; - break; - case SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION: - case SMP_FUNCTION_PHY_CONTROL: - case SMP_FUNCTION_PHY_TEST: - smp_req->header.request_length = 9; - break; - /* Default - zero is a valid default for 2.0. */ - } - } - - scu_smp_request_construct_task_context(sci_req, smp_req); - - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED - ); - - kfree(smp_req); - - return SCI_SUCCESS; -} /** * This method is called by the SCI user to build an SMP pass-through IO @@ -595,7 +528,7 @@ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_ha } -const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[] = { +static const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[] = { [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, @@ -658,7 +591,7 @@ static void scic_sds_smp_request_started_await_tc_completion_substate_enter( ); } -const struct sci_base_state scic_sds_smp_request_started_substate_table[] = { +static const struct sci_base_state scic_sds_smp_request_started_substate_table[] = { [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { .enter_state = scic_sds_smp_request_started_await_response_substate_enter, }, @@ -667,3 +600,69 @@ const struct sci_base_state scic_sds_smp_request_started_substate_table[] = { }, }; +/** + * This method is called by the SCI user to build an SMP IO request. + * + * - The user must have previously called scic_io_request_construct() on the + * supplied IO request. Indicate if the controller successfully built the IO + * request. SCI_SUCCESS This value is returned if the IO request was + * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned + * if the remote_device does not support the SMP protocol. + * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not + * properly set the association between the SCIC IO request and the user's IO + * request. Please refer to the sci_object_set_association() routine for more + * information. + */ +enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) +{ + struct smp_request *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); + + if (!smp_req) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + + sci_req->protocol = SCIC_SMP_PROTOCOL; + sci_req->has_started_substate_machine = true; + + /* Construct the started sub-state machine. */ + sci_base_state_machine_construct( + &sci_req->started_substate_machine, + &sci_req->parent.parent, + scic_sds_smp_request_started_substate_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE + ); + + /* Construct the SMP SCU Task Context */ + memcpy(smp_req, sci_req->command_buffer, sizeof(*smp_req)); + + /* + * Look at the SMP requests' header fields; for certain SAS 1.x SMP + * functions under SAS 2.0, a zero request length really indicates + * a non-zero default length. */ + if (smp_req->header.request_length == 0) { + switch (smp_req->header.function) { + case SMP_FUNCTION_DISCOVER: + case SMP_FUNCTION_REPORT_PHY_ERROR_LOG: + case SMP_FUNCTION_REPORT_PHY_SATA: + case SMP_FUNCTION_REPORT_ROUTE_INFORMATION: + smp_req->header.request_length = 2; + break; + case SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION: + case SMP_FUNCTION_PHY_CONTROL: + case SMP_FUNCTION_PHY_TEST: + smp_req->header.request_length = 9; + break; + /* Default - zero is a valid default for 2.0. */ + } + } + + scu_smp_request_construct_task_context(sci_req, smp_req); + + sci_base_state_machine_change_state( + &sci_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED + ); + + kfree(smp_req); + + return SCI_SUCCESS; +} diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index a826e4b..c9aa35f 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -193,7 +193,7 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler return SCI_SUCCESS; } -const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[] = { +static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[] = { [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, diff --git a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h index 64bf40a..d4dc118 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h @@ -99,18 +99,7 @@ enum _SCIC_SDS_STP_REQUEST_STARTED_PIO_SUBSTATES { SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE, }; - -/* --------------------------------------------------------------------------- */ - -extern const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[]; - -extern const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[]; - -/* --------------------------------------------------------------------------- */ - struct scic_sds_stp_request; -struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl( - struct scic_sds_stp_request *this_request); #endif /* _SCIC_SDS_SATA_PIO_REQUEST_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index cb396d1..193a95f 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -565,7 +565,7 @@ enum sci_status scic_sds_stp_remote_device_ready_atapi_error_substate_event_hand /* --------------------------------------------------------------------------- */ -const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = { +static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = { [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .parent.start_handler = scic_sds_remote_device_default_start_handler, .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 8da309f..0e961e9c 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -267,7 +267,7 @@ static void scu_sata_reqeust_construct_task_context( * This method will perform any general sata request construction. What part of * SATA IO request construction is general? none */ -void scic_sds_stp_non_ncq_request_construct( +static void scic_sds_stp_non_ncq_request_construct( struct scic_sds_request *this_request) { this_request->has_started_substate_machine = true; @@ -326,33 +326,6 @@ static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sc * This method returns an indication as to whether the construction was * successful. SCI_SUCCESS Currently this method always returns this value. */ -enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, - u32 len, - enum dma_data_direction dir) -{ - scic_sds_stp_non_ncq_request_construct(sci_req); - - scic_sds_stp_optimized_request_construct(sci_req, SCU_TASK_TYPE_DMA_IN, - len, dir); - - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - &sci_req->parent.parent, - scic_sds_stp_request_started_udma_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE - ); - - return SCI_SUCCESS; -} - -/** - * - * @sci_req: This parameter specifies the request to be constructed. - * - * This method will construct the STP UDMA request and its associated TC data. - * This method returns an indication as to whether the construction was - * successful. SCI_SUCCESS Currently this method always returns this value. - */ enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req, u32 len, enum dma_data_direction dir) @@ -364,7 +337,7 @@ enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_ } /** - * + * scu_stp_raw_request_construct_task_context - * @this_request: This parameter specifies the STP request object for which to * construct a RAW command frame task context. * @task_context: This parameter specifies the SCU specific task context buffer @@ -373,7 +346,7 @@ enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_ * This method performs the operations common to all SATA/STP requests * utilizing the raw frame method. none */ -void scu_stp_raw_request_construct_task_context( +static void scu_stp_raw_request_construct_task_context( struct scic_sds_stp_request *this_request, struct scu_task_context *task_context) { @@ -386,59 +359,6 @@ void scu_stp_raw_request_construct_task_context( task_context->transfer_length_bytes = sizeof(struct sata_fis_reg_h2d) - sizeof(u32); } -/** - * - * @this_request: This parameter specifies the core request object to - * construction into an STP/SATA non-data request. - * - * This method will construct the STP Non-data request and its associated TC - * data. A non-data request essentially behaves like a 0 length read request - * in the SCU. This method currently always returns SCI_SUCCESS - */ -enum sci_status scic_sds_stp_non_data_request_construct( - struct scic_sds_request *this_request) -{ - scic_sds_stp_non_ncq_request_construct(this_request); - - /* Build the STP task context structure */ - scu_stp_raw_request_construct_task_context( - (struct scic_sds_stp_request *)this_request, - this_request->task_context_buffer - ); - - sci_base_state_machine_construct( - &this_request->started_substate_machine, - &this_request->parent.parent, - scic_sds_stp_request_started_non_data_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE - ); - - return SCI_SUCCESS; -} - - -enum sci_status scic_sds_stp_soft_reset_request_construct( - struct scic_sds_request *this_request) -{ - scic_sds_stp_non_ncq_request_construct(this_request); - - /* Build the STP task context structure */ - scu_stp_raw_request_construct_task_context( - (struct scic_sds_stp_request *)this_request, - this_request->task_context_buffer - ); - - sci_base_state_machine_construct( - &this_request->started_substate_machine, - &this_request->parent.parent, - scic_sds_stp_request_started_soft_reset_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE - ); - - return SCI_SUCCESS; -} - - void scic_stp_io_request_set_ncq_tag( struct scic_sds_request *req, u16 ncq_tag) @@ -474,7 +394,7 @@ void *scic_stp_io_request_get_d2h_reg_address( * - if there are more SGL element pairs - advance to the next pair and return * element A struct scu_sgl_element* */ -struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) +static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) { struct scu_sgl_element *current_sgl; struct scic_sds_request *sci_req = &stp_req->parent; @@ -510,60 +430,6 @@ struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_st /** * - * @scic_io_request: The core request object which is cast to a SATA PIO - * request object. - * - * This method will construct the SATA PIO request. This method returns an - * indication as to whether the construction was successful. SCI_SUCCESS - * Currently this method always returns this value. - */ -enum sci_status scic_sds_stp_pio_request_construct( - struct scic_sds_request *scic_io_request, - u8 sat_protocol, - bool copy_rx_frame) -{ - struct scic_sds_stp_request *this_request; - - this_request = (struct scic_sds_stp_request *)scic_io_request; - - scic_sds_stp_non_ncq_request_construct(&this_request->parent); - - scu_stp_raw_request_construct_task_context( - this_request, this_request->parent.task_context_buffer - ); - - this_request->type.pio.current_transfer_bytes = 0; - this_request->type.pio.ending_error = 0; - this_request->type.pio.ending_status = 0; - - this_request->type.pio.request_current.sgl_offset = 0; - this_request->type.pio.request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; - this_request->type.pio.sat_protocol = sat_protocol; - - if (copy_rx_frame) { - scic_sds_request_build_sgl(&this_request->parent); - /* - * Since the IO request copy of the TC contains the same data as - * the actual TC this pointer is vaild for either. */ - this_request->type.pio.request_current.sgl_pair = - &this_request->parent.task_context_buffer->sgl_pair_ab; - } else { - /* The user does not want the data copied to the SGL buffer location */ - this_request->type.pio.request_current.sgl_pair = NULL; - } - - sci_base_state_machine_construct( - &this_request->parent.started_substate_machine, - &this_request->parent.parent.parent, - scic_sds_stp_request_started_pio_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE - ); - - return SCI_SUCCESS; -} - -/** - * * @this_request: * @completion_code: * @@ -689,7 +555,7 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( /* --------------------------------------------------------------------------- */ -const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { +static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, @@ -740,7 +606,7 @@ static void scic_sds_stp_request_started_non_data_await_d2h_enter( /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[] = { +static const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, }, @@ -749,6 +615,23 @@ const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table }, }; +enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req) +{ + struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + + scic_sds_stp_non_ncq_request_construct(sci_req); + + /* Build the STP task context structure */ + scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); + + sci_base_state_machine_construct(&sci_req->started_substate_machine, + &sci_req->parent.parent, + scic_sds_stp_request_started_non_data_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE); + + return SCI_SUCCESS; +} + #define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ /** @@ -1330,7 +1213,7 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler /* --------------------------------------------------------------------------- */ -const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { +static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, @@ -1422,7 +1305,7 @@ static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = { +static const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, }, @@ -1437,6 +1320,45 @@ const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = } }; +enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, + u8 sat_protocol, + bool copy_rx_frame) +{ + struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; + + scic_sds_stp_non_ncq_request_construct(sci_req); + + scu_stp_raw_request_construct_task_context(stp_req, + sci_req->task_context_buffer); + + pio->current_transfer_bytes = 0; + pio->ending_error = 0; + pio->ending_status = 0; + + pio->request_current.sgl_offset = 0; + pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; + pio->sat_protocol = sat_protocol; + + if (copy_rx_frame) { + scic_sds_request_build_sgl(sci_req); + /* Since the IO request copy of the TC contains the same data as + * the actual TC this pointer is vaild for either. + */ + pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab; + } else { + /* The user does not want the data copied to the SGL buffer location */ + pio->request_current.sgl_pair = NULL; + } + + sci_base_state_machine_construct(&sci_req->started_substate_machine, + &sci_req->parent.parent, + scic_sds_stp_request_started_pio_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE); + + return SCI_SUCCESS; +} + static void scic_sds_stp_request_udma_complete_request( struct scic_sds_request *this_request, u32 scu_status, @@ -1594,7 +1516,7 @@ static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler /* --------------------------------------------------------------------------- */ -const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { +static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, @@ -1648,7 +1570,7 @@ static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( /* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = { +static const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { .enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter, }, @@ -1657,6 +1579,25 @@ const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = }, }; +enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, + u32 len, + enum dma_data_direction dir) +{ + scic_sds_stp_non_ncq_request_construct(sci_req); + + scic_sds_stp_optimized_request_construct(sci_req, SCU_TASK_TYPE_DMA_IN, + len, dir); + + sci_base_state_machine_construct( + &sci_req->started_substate_machine, + &sci_req->parent.parent, + scic_sds_stp_request_started_udma_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE + ); + + return SCI_SUCCESS; +} + /** * * @this_request: @@ -1831,7 +1772,7 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( /* --------------------------------------------------------------------------- */ -const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { +static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, @@ -1925,9 +1866,7 @@ static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( ); } -/* --------------------------------------------------------------------------- */ - -const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[] = { +static const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, }, @@ -1939,3 +1878,19 @@ const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_tab }, }; +enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req) +{ + struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + + scic_sds_stp_non_ncq_request_construct(sci_req); + + /* Build the STP task context structure */ + scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); + + sci_base_state_machine_construct(&sci_req->started_substate_machine, + &sci_req->parent.parent, + scic_sds_stp_request_started_soft_reset_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); + + return SCI_SUCCESS; +} diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index c950bb3..1074879 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -76,7 +76,7 @@ struct scic_sds_stp_request { u32 udma; - struct { + struct scic_sds_stp_pio_request { /** * Total transfer for the entire PIO request recorded at request constuction * time. @@ -169,26 +169,8 @@ enum SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_SUBSTATES { SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE, }; -extern const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[]; - -extern const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[]; - -extern const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[]; - -extern const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[]; - -extern const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[]; - -extern const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[]; - -/* --------------------------------------------------------------------------- */ - u32 scic_sds_stp_request_get_object_size(void); - -void scic_sds_stp_non_ncq_request_construct( - struct scic_sds_request *this_request); - enum sci_status scic_sds_stp_pio_request_construct( struct scic_sds_request *scic_io_request, u8 sat_protocol, @@ -214,8 +196,5 @@ enum sci_status scic_sds_stp_ncq_request_construct( u32 transfer_length, enum dma_data_direction dir); -void scu_stp_raw_request_construct_task_context( - struct scic_sds_stp_request *this_request, - struct scu_task_context *task_context); #endif /* _SCIC_SDS_STP_REQUEST_T_ */ diff --git a/drivers/scsi/isci/firmware/README b/drivers/scsi/isci/firmware/README index cf7e428..8056d2b 100644 --- a/drivers/scsi/isci/firmware/README +++ b/drivers/scsi/isci/firmware/README @@ -32,5 +32,5 @@ Header Type - u8: 0xf ============================================================================== Place isci_firmware.bin in /lib/firmware -Be sure to recreate the initramfs image to include the firmware. +Be sure to recreate the initramfs image to include the firmware. diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 666076a..74dc96d 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -201,7 +201,7 @@ void isci_port_link_up( call_status = scic_sata_phy_get_properties(phy, &sata_phy_properties); - /* + /* * XXX I am concerned about this "assert". shouldn't we * handle the return appropriately? */ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index eba8e0b..c6ce9d0 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -1263,47 +1263,6 @@ enum dma_data_direction isci_request_io_request_get_data_direction( * * physical address in the specified sge. */ -dma_addr_t isci_request_sge_get_address_field( - struct isci_request *request, - void *sge_address) -{ - struct sas_task *task = isci_request_access_task(request); - dma_addr_t ret; - struct isci_host *isci_host = isci_host_from_sas_ha( - task->dev->port->ha); - - dev_dbg(&isci_host->pdev->dev, - "%s: request = %p, sge_address = %p\n", - __func__, - request, - sge_address); - - if (task->data_dir == PCI_DMA_NONE) - return 0; - - /* the case where num_scatter == 0 is special, in that - * task->scatter is the actual buffer address, not an sgl. - * so a map single is required here. - */ - if ((task->num_scatter == 0) && - !sas_protocol_ata(task->task_proto)) { - ret = dma_map_single( - &isci_host->pdev->dev, - task->scatter, - task->total_xfer_len, - task->data_dir - ); - request->zero_scatter_daddr = ret; - } else - ret = sg_dma_address(((struct scatterlist *)sge_address)); - - dev_dbg(&isci_host->pdev->dev, - "%s: bus address = %lx\n", - __func__, - (unsigned long)ret); - - return ret; -} /** @@ -1314,38 +1273,6 @@ dma_addr_t isci_request_sge_get_address_field( * * length field value in the specified sge. */ -u32 isci_request_sge_get_length_field( - struct isci_request *request, - void *sge_address) -{ - struct sas_task *task = isci_request_access_task(request); - int ret; - - dev_dbg(&request->isci_host->pdev->dev, - "%s: request = %p, sge_address = %p\n", - __func__, - request, - sge_address); - - if (task->data_dir == PCI_DMA_NONE) - return 0; - - /* the case where num_scatter == 0 is special, in that - * task->scatter is the actual buffer address, not an sgl. - * so we return total_xfer_len here. - */ - if (task->num_scatter == 0) - ret = task->total_xfer_len; - else - ret = sg_dma_len((struct scatterlist *)sge_address); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: len = %d\n", - __func__, - ret); - - return ret; -} /** diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index b45c0f1..4a63bb6 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -391,13 +391,7 @@ static inline void *isci_request_io_request_get_next_sge( return ret; } -dma_addr_t isci_request_sge_get_address_field( - struct isci_request *request, - void *sge_address); -u32 isci_request_sge_get_length_field( - struct isci_request *request, - void *sge_address); void *isci_request_ssp_io_request_get_cdb_address( struct isci_request *request); diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index d483680..7e96684 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -588,7 +588,7 @@ void isci_task_build_tmf( tmf->cb_data = cb_data; } -void isci_task_build_abort_task_tmf( +static void isci_task_build_abort_task_tmf( struct isci_tmf *tmf, struct isci_remote_device *isci_device, enum isci_tmf_function_codes code, @@ -1528,15 +1528,6 @@ void isci_task_request_complete( * * lun for specified task request. */ -u32 isci_task_ssp_request_get_lun(struct isci_request *request) -{ - struct isci_tmf *isci_tmf = isci_request_access_tmf(request); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: lun = %d\n", __func__, isci_tmf->lun[0]); -/* @todo: build lun from array of bytes to 32 bit */ - return isci_tmf->lun[0]; -} /** * isci_task_ssp_request_get_function() - This function is called by the sci diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 9754b43..d7cb6fe 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -202,8 +202,6 @@ u16 isci_task_ssp_request_get_io_tag_to_manage( u8 isci_task_ssp_request_get_function( struct isci_request *request); -u32 isci_task_ssp_request_get_lun( - struct isci_request *request); void *isci_task_ssp_request_get_response_data_address( struct isci_request *request); @@ -226,14 +224,6 @@ void isci_task_build_tmf( void *), void *cb_data); -void isci_task_build_abort_task_tmf( - struct isci_tmf *tmf, - struct isci_remote_device *isci_device, - enum isci_tmf_function_codes code, - void (*tmf_sent_cb)( - enum isci_tmf_cb_state, - struct isci_tmf *, void *), - struct isci_request *old_request); int isci_task_execute_tmf( struct isci_host *isci_host, -- cgit v0.10.2 From 2828dc0b55da8937439121eaa82e9ee80c520f53 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 26 Mar 2011 16:56:55 -0700 Subject: isci: remove unused "remote_device_started" These routines are just stubs, re-add them when / if they are needed. Also cleanup remote_device_stopped. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 5cc6f2f..f20d0eb 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1584,31 +1584,6 @@ void scic_sds_controller_link_down( } /** - * This method is called by the remote device to inform the controller - * that this remote device has started. - * - */ - -void scic_sds_controller_remote_device_started(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev) -{ - u32 state; - scic_sds_controller_device_handler_t started; - - state = scic->parent.state_machine.current_state_id; - started = scic_sds_controller_state_handler_table[state].remote_device_started_handler; - - if (started) - started(scic, sci_dev); - else { - dev_dbg(scic_to_dev(scic), - "%s: SCIC Controller 0x%p remote device started event " - "from device 0x%p in unexpected state %d\n", - __func__, scic, sci_dev, state); - } -} - -/** * This is a helper method to determine if any remote devices on this * controller are still in the stopping state. * @@ -1642,7 +1617,7 @@ void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, scic_sds_controller_device_handler_t stopped; state = scic->parent.state_machine.current_state_id; - stopped = scic_sds_controller_state_handler_table[state].remote_device_stopped_handler; + stopped = scic_sds_controller_state_handler_table[state].device_stopped; if (stopped) stopped(scic, sci_dev); @@ -3575,7 +3550,7 @@ const struct scic_sds_controller_state_handler scic_sds_controller_state_handler .base.complete_io = scic_sds_controller_stopping_state_complete_io_handler, .base.continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, - .remote_device_stopped_handler = scic_sds_controller_stopping_state_device_stopped_handler, + .device_stopped = scic_sds_controller_stopping_state_device_stopped_handler, }, [SCI_BASE_CONTROLLER_STATE_STOPPED] = { .base.reset = scic_sds_controller_general_reset_handler, diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index fedf503..22b5f2c 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -396,8 +396,7 @@ struct scic_sds_controller_state_handler { sci_base_controller_request_handler_t terminate_request; scic_sds_controller_phy_handler_t link_up; scic_sds_controller_phy_handler_t link_down; - scic_sds_controller_device_handler_t remote_device_started_handler; - scic_sds_controller_device_handler_t remote_device_stopped_handler; + scic_sds_controller_device_handler_t device_stopped; }; extern const struct scic_sds_controller_state_handler @@ -532,17 +531,10 @@ extern const struct scic_sds_controller_state_handler #define scic_sds_controller_clear_invalid_phy(controller, phy) \ ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) -/* --------------------------------------------------------------------------- */ - - -/* --------------------------------------------------------------------------- */ - void scic_sds_controller_post_request( struct scic_sds_controller *this_controller, u32 request); -/* --------------------------------------------------------------------------- */ - void scic_sds_controller_release_frame( struct scic_sds_controller *this_controller, u32 frame_index); @@ -552,8 +544,6 @@ void scic_sds_controller_copy_sata_response( void *frame_header, void *frame_buffer); -/* --------------------------------------------------------------------------- */ - enum sci_status scic_sds_controller_allocate_remote_node_context( struct scic_sds_controller *this_controller, struct scic_sds_remote_device *the_device, @@ -568,8 +558,6 @@ union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffe struct scic_sds_controller *this_controller, u16 node_id); -/* --------------------------------------------------------------------------- */ - struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( struct scic_sds_controller *this_controller, u16 io_tag); @@ -579,12 +567,6 @@ struct scu_task_context *scic_sds_controller_get_task_context_buffer( struct scic_sds_controller *this_controller, u16 io_tag); -/* - * ***************************************************************************** - * * CORE CONTROLLER POWER CONTROL METHODS - * ***************************************************************************** */ - - void scic_sds_controller_power_control_queue_insert( struct scic_sds_controller *this_controller, struct scic_sds_phy *the_phy); @@ -593,11 +575,6 @@ void scic_sds_controller_power_control_queue_remove( struct scic_sds_controller *this_controller, struct scic_sds_phy *the_phy); -/* - * ***************************************************************************** - * * CORE CONTROLLER PHY MESSAGE PROCESSING - * ***************************************************************************** */ - void scic_sds_controller_link_up( struct scic_sds_controller *this_controller, struct scic_sds_port *the_port, @@ -608,16 +585,6 @@ void scic_sds_controller_link_down( struct scic_sds_port *the_port, struct scic_sds_phy *the_phy); -/* - * ***************************************************************************** - * * CORE CONTROLLER REMOTE DEVICE MESSAGE PROCESSING - * ***************************************************************************** */ - - -void scic_sds_controller_remote_device_started( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *the_device); - void scic_sds_controller_remote_device_stopped( struct scic_sds_controller *this_controller, struct scic_sds_remote_device *the_device); diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 5ab8b03..e100fde 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1533,34 +1533,19 @@ static void scic_sds_remote_device_starting_state_enter( SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); } -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the exit function for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it - * reports that the device start is complete. none - */ -static void scic_sds_remote_device_starting_state_exit( - struct sci_base_object *object) +static void scic_sds_remote_device_starting_state_exit(struct sci_base_object *object) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)object; - struct scic_sds_controller *scic = - scic_sds_remote_device_get_controller(sci_dev); + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); - /* * @todo Check the device object for the proper return code for this * callback */ isci_remote_device_start_complete(ihost, idev, SCI_SUCCESS); - - scic_sds_controller_remote_device_started( - scic_sds_remote_device_get_controller(sci_dev), - sci_dev); } /** -- cgit v0.10.2 From de728b7d72089330603819a74255a0469780fd0e Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Sat, 26 Mar 2011 17:14:07 -0700 Subject: isci: Remove "screaming" data types Converting the all CAPS data types to lower case. Reported-by: Christoph Hellwig Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sati_translator_sequence.h b/drivers/scsi/isci/core/sati_translator_sequence.h index 592570d..915724c 100644 --- a/drivers/scsi/isci/core/sati_translator_sequence.h +++ b/drivers/scsi/isci/core/sati_translator_sequence.h @@ -67,7 +67,7 @@ #include "sati_device.h" /** - * enum _SATI_TRANSLATOR_SEQUENCE_TYPE - This enumeration defines the possible + * enum _sati_translator_sequence_type - This enumeration defines the possible * sequence types for the translator. * * @@ -172,7 +172,7 @@ enum sati_translator_sequence_type { * * */ -typedef struct SATI_MODE_SELECT_PROCESSING_STATE { +struct sati_mode_select_processing_state { u8 *mode_pages; u32 mode_page_offset; u32 mode_pages_size; @@ -180,11 +180,10 @@ typedef struct SATI_MODE_SELECT_PROCESSING_STATE { u32 total_ata_command_sent; u32 ata_command_sent_for_cmp; /* cmp: current mode page */ bool current_mode_page_processed; - -} SATI_MODE_SELECT_PROCESSING_STATE_T; +}; -enum SATI_REASSIGN_BLOCKS_ATA_COMMAND_STATUS { +enum sati_reassign_blocks_ata_command_status { SATI_REASSIGN_BLOCKS_READY_TO_SEND, SATI_REASSIGN_BLOCKS_COMMAND_FAIL, SATI_REASSIGN_BLOCKS_COMMAND_SUCCESS, @@ -204,7 +203,7 @@ struct sati_reassign_blocks_processing_state { u32 size_of_data_processed; u32 ata_command_sent_for_current_lba; bool current_lba_processed; - enum SATI_REASSIGN_BLOCKS_ATA_COMMAND_STATUS ata_command_status; + enum sati_reassign_blocks_ata_command_status ata_command_status; }; @@ -291,8 +290,9 @@ struct sati_translator_sequence { u32 translated_command; u32 move_sector_count; u32 scratch; - struct sati_reassign_blocks_processing_state reassign_blocks_process_state; - SATI_MODE_SELECT_PROCESSING_STATE_T process_state; + struct sati_reassign_blocks_processing_state + reassign_blocks_process_state; + struct sati_mode_select_processing_state process_state; struct sati_atapi_data sati_atapi_data; } command_specific_data; diff --git a/drivers/scsi/isci/core/sci_base_port.h b/drivers/scsi/isci/core/sci_base_port.h index b931c3c..252d48c 100644 --- a/drivers/scsi/isci/core/sci_base_port.h +++ b/drivers/scsi/isci/core/sci_base_port.h @@ -128,19 +128,16 @@ struct sci_base_port { struct sci_base_phy; -typedef enum sci_status (*SCI_BASE_PORT_HANDLER_T)( - struct sci_base_port * - ); +typedef enum sci_status (*sci_base_port_handler_t) ( + struct sci_base_port *); -typedef enum sci_status (*SCI_BASE_PORT_PHY_HANDLER_T)( +typedef enum sci_status (*sci_base_port_phy_handler_t) ( struct sci_base_port *, - struct sci_base_phy * - ); + struct sci_base_phy *); -typedef enum sci_status (*SCI_BASE_PORT_RESET_HANDLER_T)( +typedef enum sci_status (*sci_base_port_reset_handler_t) ( struct sci_base_port *, - u32 timeout - ); + u32 timeout); /** * struct sci_base_port_state_handler - This structure contains all of the @@ -152,40 +149,39 @@ typedef enum sci_status (*SCI_BASE_PORT_RESET_HANDLER_T)( */ struct sci_base_port_state_handler { /** - * The start_handler specifies the method invoked when a user attempts to - * start a port. + * The start_handler specifies the method invoked when a user + * attempts to start a port. */ - SCI_BASE_PORT_HANDLER_T start_handler; + sci_base_port_handler_t start_handler; /** - * The stop_handler specifies the method invoked when a user attempts to - * stop a port. + * The stop_handler specifies the method invoked when a user + * attempts to stop a port. */ - SCI_BASE_PORT_HANDLER_T stop_handler; + sci_base_port_handler_t stop_handler; /** * The destruct_handler specifies the method invoked when attempting to * destruct a port. */ - SCI_BASE_PORT_HANDLER_T destruct_handler; + sci_base_port_handler_t destruct_handler; /** - * The reset_handler specifies the method invoked when a user attempts to - * hard reset a port. + * The reset_handler specifies the method invoked when a user + * attempts to hard reset a port. */ - SCI_BASE_PORT_RESET_HANDLER_T reset_handler; + sci_base_port_reset_handler_t reset_handler; /** - * The add_phy_handler specifies the method invoked when a user attempts to - * add another phy into the port. + * The add_phy_handler specifies the method invoked when a user + * attempts to add another phy into the port. */ - SCI_BASE_PORT_PHY_HANDLER_T add_phy_handler; + sci_base_port_phy_handler_t add_phy_handler; /** * The remove_phy_handler specifies the method invoked when a user * attempts to remove a phy from the port. */ - SCI_BASE_PORT_PHY_HANDLER_T remove_phy_handler; - + sci_base_port_phy_handler_t remove_phy_handler; }; #endif /* _SCI_BASE_PORT_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_request.h b/drivers/scsi/isci/core/sci_base_request.h index d1b2195..223aa4c 100644 --- a/drivers/scsi/isci/core/sci_base_request.h +++ b/drivers/scsi/isci/core/sci_base_request.h @@ -129,7 +129,7 @@ struct sci_base_request { struct sci_base_state_machine state_machine; }; -typedef enum sci_status (*SCI_BASE_REQUEST_HANDLER_T)( +typedef enum sci_status (*sci_base_request_handler_t)( struct sci_base_request *this_request ); @@ -146,25 +146,25 @@ struct sci_base_request_state_handler { * The start_handler specifies the method invoked when a user attempts to * start a request. */ - SCI_BASE_REQUEST_HANDLER_T start_handler; + sci_base_request_handler_t start_handler; /** * The abort_handler specifies the method invoked when a user attempts to * abort a request. */ - SCI_BASE_REQUEST_HANDLER_T abort_handler; + sci_base_request_handler_t abort_handler; /** * The complete_handler specifies the method invoked when a user attempts to * complete a request. */ - SCI_BASE_REQUEST_HANDLER_T complete_handler; + sci_base_request_handler_t complete_handler; /** * The destruct_handler specifies the method invoked when a user attempts to * destruct a request. */ - SCI_BASE_REQUEST_HANDLER_T destruct_handler; + sci_base_request_handler_t destruct_handler; }; diff --git a/drivers/scsi/isci/core/sci_base_state.h b/drivers/scsi/isci/core/sci_base_state.h index d6b9c1a..4272a6f 100644 --- a/drivers/scsi/isci/core/sci_base_state.h +++ b/drivers/scsi/isci/core/sci_base_state.h @@ -58,11 +58,11 @@ #include "sci_object.h" -typedef void (*SCI_BASE_STATE_HANDLER_T)( +typedef void (*sci_base_state_handler_t)( void ); -typedef void (*SCI_STATE_TRANSITION_T)( +typedef void (*sci_state_transition_t)( struct sci_base_object *base_object ); @@ -77,13 +77,13 @@ struct sci_base_state { * This field is a function pointer that defines the method to be * invoked when the state is entered. */ - SCI_STATE_TRANSITION_T enter_state; + sci_state_transition_t enter_state; /** * This field is a function pointer that defines the method to be * invoked when the state is exited. */ - SCI_STATE_TRANSITION_T exit_state; + sci_state_transition_t exit_state; }; diff --git a/drivers/scsi/isci/core/sci_base_state_machine.c b/drivers/scsi/isci/core/sci_base_state_machine.c index 5b1e8da..bc416d5 100644 --- a/drivers/scsi/isci/core/sci_base_state_machine.c +++ b/drivers/scsi/isci/core/sci_base_state_machine.c @@ -65,7 +65,7 @@ static void sci_state_machine_exit_state(struct sci_base_state_machine *sm) { u32 state = sm->current_state_id; - SCI_STATE_TRANSITION_T exit = sm->state_table[state].exit_state; + sci_state_transition_t exit = sm->state_table[state].exit_state; if (exit) exit(sm->state_machine_owner); @@ -74,7 +74,7 @@ static void sci_state_machine_exit_state(struct sci_base_state_machine *sm) static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) { u32 state = sm->current_state_id; - SCI_STATE_TRANSITION_T enter = sm->state_table[state].enter_state; + sci_state_transition_t enter = sm->state_table[state].enter_state; if (enter) enter(sm->state_machine_owner); diff --git a/drivers/scsi/isci/core/sci_status.h b/drivers/scsi/isci/core/sci_status.h index 72b6108..8b66619 100644 --- a/drivers/scsi/isci/core/sci_status.h +++ b/drivers/scsi/isci/core/sci_status.h @@ -65,7 +65,7 @@ /** - * enum _SCI_STATUS - This is the general return status enumeration for non-IO, + * enum sci_status - This is the general return status enumeration for non-IO, * non-task management related SCI interface methods. * * @@ -347,7 +347,7 @@ enum sci_status { }; /** - * enum _SCI_IO_STATUS - This enumeration depicts all of the possible IO + * enum sci_io_status - This enumeration depicts all of the possible IO * completion status values. Each value in this enumeration maps directly * to a value in the enum sci_status enumeration. Please refer to that * enumeration for detailed comments concerning what the status represents. @@ -380,7 +380,7 @@ enum sci_io_status { }; /** - * enum _SCI_TASK_STATUS - This enumeration depicts all of the possible task + * enum sci_task_status - This enumeration depicts all of the possible task * completion status values. Each value in this enumeration maps directly * to a value in the enum sci_status enumeration. Please refer to that * enumeration for detailed comments concerning what the status represents. diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index 5829533..56d0507 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -61,7 +61,7 @@ struct scic_sds_port; -enum SCIC_PORT_NOT_READY_REASON_CODE { +enum scic_port_not_ready_reason_code { SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index f20d0eb..9266fbe 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -705,7 +705,7 @@ static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller for (index = 0; index < scic->logical_port_entries; index++) { struct scic_sds_port *sci_port = &scic->port_table[index]; - SCI_BASE_PORT_HANDLER_T stop; + sci_base_port_handler_t stop; stop = sci_port->state_handlers->parent.stop_handler; port_status = stop(&sci_port->parent); diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 22b5f2c..fd78148 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -90,12 +90,12 @@ struct scic_sds_controller; #define SCU_COMPLETION_RAM_ALIGNMENT (64) /** - * enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS - + * enum scic_sds_controller_memory_descriptors - * * This enumeration depects the types of MDEs that are going to be created for * the controller object. */ -enum SCIC_SDS_CONTROLLER_MEMORY_DESCRIPTORS { +enum scic_sds_controller_memory_descriptors { /** * Completion queue MDE entry */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 4745a79..7f7a045 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -92,11 +92,11 @@ struct scic_sds_port; #define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 /** - * enum SCIC_SDS_PHY_STARTING_SUBSTATES - + * enum scic_sds_phy_starting_substates - * * */ -enum SCIC_SDS_PHY_STARTING_SUBSTATES { +enum scic_sds_phy_starting_substates { /** * Initial state */ @@ -156,7 +156,7 @@ struct scic_sds_controller; * * */ -enum SCIC_SDS_PHY_PROTOCOL { +enum scic_sds_phy_protocol { /** * This is an unknown phy type since there is either nothing on the other * end or we have not detected the phy type as yet. @@ -202,7 +202,7 @@ struct scic_sds_phy { * field contains a legitamite value once the PHY has link trained with * a remote phy. */ - enum SCIC_SDS_PHY_PROTOCOL protocol; + enum scic_sds_phy_protocol protocol; /** * This field specifies the index with which this phy is associated (0-3). diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 0a95f64..88b892d 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -620,15 +620,12 @@ enum sci_status scic_port_get_properties( } /** - * scic_port_hard_reset() - This method will request the SCI implementation to - * perform a HARD RESET on the SAS Port. If/When the HARD RESET completes - * the SCI user will be notified via an SCI OS callback indicating a direct - * attached device was found. + * scic_port_hard_reset() - perform port hard reset * @port: a handle corresponding to the SAS port to be hard reset. * @reset_timeout: This parameter specifies the number of milliseconds in which * the port reset operation should complete. * - * The SCI User callback in SCIC_USER_CALLBACKS_T will only be called once for + * The SCI User callback in scic_user_callbacks_t will only be called once for * each phy in the SAS Port at completion of the hard reset sequence. Return a * status indicating whether the hard reset started successfully. SCI_SUCCESS * This value is returned if the hard reset operation started successfully. diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 8167f5e..a5aa9e1 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -84,21 +84,23 @@ * This enumeration depicts all of the states for the core port ready substate * machine. */ -enum SCIC_SDS_PORT_READY_SUBSTATES { +enum scic_sds_port_ready_substates { /** - * The substate where the port is started and ready but has no active phys. + * The substate where the port is started and ready but has no + * active phys. */ SCIC_SDS_PORT_READY_SUBSTATE_WAITING, /** - * The substate where the port is started and ready and there is at least one - * phy operational. + * The substate where the port is started and ready and there is + * at least one phy operational. */ SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL, /** - * The substate where the port is started and there was an add/remove phy - * event. This state is only used in Automatic Port Configuration Mode (APC) + * The substate where the port is started and there was an + * add/remove phy event. This state is only used in Automatic + * Port Configuration Mode (APC) */ SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING, @@ -122,9 +124,9 @@ struct scic_sds_port { struct sci_base_port parent; /** - * This field is the port index that is reported to the SCI USER. This allows - * the actual hardware physical port to change without the SCI USER getting a - * different answer for the get port index. + * This field is the port index that is reported to the SCI USER. + * This allows the actual hardware physical port to change without + * the SCI USER getting a different answer for the get port index. */ u8 logical_port_index; @@ -134,9 +136,9 @@ struct scic_sds_port { u8 physical_port_index; /** - * This field contains the active phy mask for the port. This mask is used in - * conjunction with the phy state to determine which phy to select for some - * port operations. + * This field contains the active phy mask for the port. + * This mask is used in conjunction with the phy state to determine + * which phy to select for some port operations. */ u8 active_phy_mask; @@ -150,8 +152,8 @@ struct scic_sds_port { u32 started_request_count; /** - * This field contains the number of devices assigned to this port. It is - * used to control port start requests. + * This field contains the number of devices assigned to this port. + * It is used to control port start requests. */ u32 assigned_device_count; @@ -167,7 +169,8 @@ struct scic_sds_port { struct scic_sds_phy *phy_table[SCI_MAX_PHYS]; /** - * This field is a pointer back to the controller that owns this port object. + * This field is a pointer back to the controller that owns this + * port object. */ struct scic_sds_controller *owning_controller; @@ -178,8 +181,8 @@ struct scic_sds_port { /** * This field points to the current set of state handlers for this port - * object. These state handlers are assigned at each enter state of the state - * machine. + * object. These state handlers are assigned at each enter state of + * the state machine. */ struct scic_sds_port_state_handler *state_handlers; @@ -191,17 +194,18 @@ struct scic_sds_port { /* / Memory mapped hardware register space */ /** - * This field is the pointer to the port task scheduler registers for the SCU - * hardware. + * This field is the pointer to the port task scheduler registers + * for the SCU hardware. */ - struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers; + struct scu_port_task_scheduler_registers __iomem + *port_task_scheduler_registers; /** - * This field is identical for all port objects and points to the port task - * scheduler group PE configuration registers. It is used to assign PEs to a - * port. + * This field is identical for all port objects and points to the port + * task scheduler group PE configuration registers. + * It is used to assign PEs to a port. */ - SCU_PORT_PE_CONFIGURATION_REGISTER_T *port_pe_configuration_register; + u32 *port_pe_configuration_register; /** * This field is the VIIT register space for ths port object. @@ -211,13 +215,13 @@ struct scic_sds_port { }; -typedef enum sci_status (*SCIC_SDS_PORT_EVENT_HANDLER_T)(struct scic_sds_port *, u32); +typedef enum sci_status (*scic_sds_port_event_handler_t)(struct scic_sds_port *, u32); -typedef enum sci_status (*SCIC_SDS_PORT_FRAME_HANDLER_T)(struct scic_sds_port *, u32); +typedef enum sci_status (*scic_sds_port_frame_handler_t)(struct scic_sds_port *, u32); -typedef void (*SCIC_SDS_PORT_LINK_HANDLER_T)(struct scic_sds_port *, struct scic_sds_phy *); +typedef void (*scic_sds_port_link_handler_t)(struct scic_sds_port *, struct scic_sds_phy *); -typedef enum sci_status (*SCIC_SDS_PORT_IO_REQUEST_HANDLER_T)( +typedef enum sci_status (*scic_sds_port_io_request_handler_t)( struct scic_sds_port *, struct scic_sds_remote_device *, struct scic_sds_request *); @@ -225,14 +229,14 @@ typedef enum sci_status (*SCIC_SDS_PORT_IO_REQUEST_HANDLER_T)( struct scic_sds_port_state_handler { struct sci_base_port_state_handler parent; - SCIC_SDS_PORT_FRAME_HANDLER_T frame_handler; - SCIC_SDS_PORT_EVENT_HANDLER_T event_handler; + scic_sds_port_frame_handler_t frame_handler; + scic_sds_port_event_handler_t event_handler; - SCIC_SDS_PORT_LINK_HANDLER_T link_up_handler; - SCIC_SDS_PORT_LINK_HANDLER_T link_down_handler; + scic_sds_port_link_handler_t link_up_handler; + scic_sds_port_link_handler_t link_down_handler; - SCIC_SDS_PORT_IO_REQUEST_HANDLER_T start_io_handler; - SCIC_SDS_PORT_IO_REQUEST_HANDLER_T complete_io_handler; + scic_sds_port_io_request_handler_t start_io_handler; + scic_sds_port_io_request_handler_t complete_io_handler; }; diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index d2d3f52..22703b3 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -820,7 +820,7 @@ enum sci_status scic_sds_port_configuration_agent_initialize( struct scic_sds_port_configuration_agent *port_agent) { enum sci_status status = SCI_SUCCESS; - enum SCIC_PORT_CONFIGURATION_MODE mode; + enum scic_port_configuration_mode mode; struct isci_host *ihost = sci_object_get_association(scic); mode = scic->oem_parameters.sds1.controller.mode_type; diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h index 4146735..56a40a7 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h @@ -71,7 +71,7 @@ struct scic_sds_port_configuration_agent; struct scic_sds_port; struct scic_sds_phy; -typedef void (*SCIC_SDS_PORT_CONFIGURATION_AGENT_PHY_HANDLER_T)( +typedef void (*scic_sds_port_configuration_agent_phy_handler_t)( struct scic_sds_controller *, struct scic_sds_port_configuration_agent *, struct scic_sds_port *, @@ -91,8 +91,8 @@ struct scic_sds_port_configuration_agent { bool timer_pending; - SCIC_SDS_PORT_CONFIGURATION_AGENT_PHY_HANDLER_T link_up_handler; - SCIC_SDS_PORT_CONFIGURATION_AGENT_PHY_HANDLER_T link_down_handler; + scic_sds_port_configuration_agent_phy_handler_t link_up_handler; + scic_sds_port_configuration_agent_phy_handler_t link_down_handler; void *timer; diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h index eccad55..e21abe2 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.h @@ -213,7 +213,7 @@ enum scis_sds_remote_node_context_states { * This enumeration is used to define the end destination state for the remote * node context. */ -enum SCIC_SDS_REMOTE_NODE_CONTEXT_DESTINATION_STATE { +enum scic_sds_remote_node_context_destination_state { SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED, SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY, SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL @@ -257,7 +257,7 @@ struct scic_sds_remote_node_context { * state. This can cause an automatic resume on receiving a suspension * notification. */ - enum SCIC_SDS_REMOTE_NODE_CONTEXT_DESTINATION_STATE destination_state; + enum scic_sds_remote_node_context_destination_state destination_state; /** * This field contains the callback function that the user requested to be diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index c54d8ef..286b749 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -74,7 +74,7 @@ struct scic_sds_remote_device; struct scic_sds_io_request_state_handler; /** - * enum _SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATES - This enumeration + * enum _scic_sds_io_request_started_task_mgmt_substates - This enumeration * depicts all of the substates for a task management request to be * performed in the STARTED super-state. * @@ -98,7 +98,7 @@ enum scic_sds_raw_request_started_task_mgmt_substates { /** - * enum _SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATES - This enumeration depicts all + * enum _scic_sds_smp_request_started_substates - This enumeration depicts all * of the substates for a SMP request to be performed in the STARTED * super-state. * @@ -120,7 +120,7 @@ enum scic_sds_smp_request_started_substates { }; /** - * struct SCIC_SDS_IO_REQUEST - This structure contains or references all of + * struct scic_sds_request - This structure contains or references all of * the data necessary to process a task management or normal IO request. * * @@ -328,7 +328,7 @@ extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substat * scic_sds_io_request_tc_completion() - * * This macro invokes the core state task completion handler for the - * SCIC_SDS_IO_REQUEST_T object. + * struct scic_sds_io_request object. */ #define scic_sds_io_request_tc_completion(this_request, completion_code) \ { \ diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c index 97dc9bf..9635b37 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c @@ -146,7 +146,7 @@ void scu_stp_packet_request_command_phase_construct_task_context( } /* sata header */ - memset(&(task_context->type.stp), 0, sizeof(struct STP_TASK_CONTEXT)); + memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context)); task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; /* @@ -213,7 +213,7 @@ void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( memset(this_request->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); memcpy(((u8 *)this_request->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); - memset(&(task_context->type.stp), 0, sizeof(struct STP_TASK_CONTEXT)); + memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context)); task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; /* diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h index 2a7aec9..eebfff3 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h @@ -70,7 +70,7 @@ * * This is the enumeration of the SATA PIO DATA IN started substate machine. */ -enum _SCIC_SDS_STP_PACKET_REQUEST_STARTED_SUBSTATES { +enum _scic_sds_stp_packet_request_started_substates { /** * While in this state the IO request object is waiting for the TC completion * notification for the H2D Register FIS diff --git a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h index d4dc118..d0ae590 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h @@ -72,7 +72,7 @@ * * This is the enumeration of the SATA PIO DATA IN started substate machine. */ -enum _SCIC_SDS_STP_REQUEST_STARTED_PIO_SUBSTATES { +enum _scic_sds_stp_request_started_pio_substates { /** * While in this state the IO request object is waiting for the TC completion * notification for the H2D Register FIS diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index 1074879..cb4d2d6 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -134,36 +134,36 @@ struct scic_sds_stp_request { }; /** - * enum SCIC_SDS_STP_REQUEST_STARTED_UDMA_SUBSTATES - This enumeration depicts + * enum scic_sds_stp_request_started_udma_substates - This enumeration depicts * the various sub-states associated with a SATA/STP UDMA protocol operation. * * */ -enum SCIC_SDS_STP_REQUEST_STARTED_UDMA_SUBSTATES { +enum scic_sds_stp_request_started_udma_substates { SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE, SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE, }; /** - * enum SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_SUBSTATES - This enumeration + * enum scic_sds_stp_request_started_non_data_substates - This enumeration * depicts the various sub-states associated with a SATA/STP non-data * protocol operation. * * */ -enum SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_SUBSTATES { +enum scic_sds_stp_request_started_non_data_substates { SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE, SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE, }; /** - * enum SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_SUBSTATES - THis enumeration + * enum scic_sds_stp_request_started_soft_reset_substates - THis enumeration * depicts the various sub-states associated with a SATA/STP soft reset * operation. * * */ -enum SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_SUBSTATES { +enum scic_sds_stp_request_started_soft_reset_substates { SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE, diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h index 49db83f..a0204aa 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h @@ -69,13 +69,13 @@ #include "sci_status.h" /** - * enum UNSOLICITED_FRAME_STATE - + * enum unsolicited_frame_state - * * This enumeration represents the current unsolicited frame state. The * controller object can not updtate the hardware unsolicited frame put pointer * unless it has already processed the priror unsolicited frames. */ -enum UNSOLICITED_FRAME_STATE { +enum unsolicited_frame_state { /** * This state is when the frame is empty and not in use. It is * different from the released state in that the hardware could DMA @@ -110,7 +110,7 @@ struct scic_sds_unsolicited_frame { /** * This field contains the current frame state */ - enum UNSOLICITED_FRAME_STATE state; + enum unsolicited_frame_state state; /** * This field points to the frame header data. diff --git a/drivers/scsi/isci/core/scu_registers.h b/drivers/scsi/isci/core/scu_registers.h index 05a1411..12f2bac 100644 --- a/drivers/scsi/isci/core/scu_registers.h +++ b/drivers/scsi/isci/core/scu_registers.h @@ -1423,7 +1423,7 @@ struct scu_sgpio_registers { * ***************************************************************************** */ #define SCU_VIIT_BASE 0x1c00 -struct SCU_VIIT_REGISTERS { +struct scu_viit_registers { u32 registers[256]; }; @@ -1463,8 +1463,6 @@ struct scu_port_task_scheduler_registers { u32 status; }; -typedef u32 SCU_PORT_PE_CONFIGURATION_REGISTER_T; - /** * struct scu_port_task_scheduler_group_registers - These are the PORT Task * Scheduler registers @@ -1495,7 +1493,7 @@ struct scu_port_task_scheduler_group_registers { * 0x0034 PCSPE1CR * 0x0038 PCSPE2CR * 0x003C PCSPE3CR */ - SCU_PORT_PE_CONFIGURATION_REGISTER_T protocol_engine[4]; + u32 protocol_engine[4]; /* 0x0040 ETMTSCCR */ u32 tc_scanning_interval_control; /* 0x0044 ETMRNSCCR */ @@ -1684,12 +1682,12 @@ struct scu_afe_registers { u32 reserved_0c00_0ffc[0x0100]; }; -struct SCU_PROTOCOL_ENGINE_GROUP_REGISTERS { +struct scu_protocol_engine_group_registers { u32 table[0xE0]; }; -struct SCU_VIIT_IIT { +struct scu_viit_iit { u32 table[256]; }; @@ -1699,7 +1697,7 @@ struct SCU_VIIT_IIT { * * */ -struct SCU_ZONE_PARTITION_TABLE { +struct scu_zone_partition_table { u32 table[2048]; }; @@ -1709,7 +1707,7 @@ struct SCU_ZONE_PARTITION_TABLE { * * */ -struct SCU_COMPLETION_RAM { +struct scu_completion_ram { u32 ram[128]; }; @@ -1719,19 +1717,19 @@ struct SCU_COMPLETION_RAM { * * */ -struct SCU_FRAME_BUFFER_RAM { +struct scu_frame_buffer_ram { u32 ram[128]; }; -#define SCU_SCRATCH_RAM_SIZE_IN_DWORDS 256 +#define scu_scratch_ram_SIZE_IN_DWORDS 256 /** * Placeholder for the scratch RAM registers. * * */ -struct SCU_SCRATCH_RAM { - u32 ram[SCU_SCRATCH_RAM_SIZE_IN_DWORDS]; +struct scu_scratch_ram { + u32 ram[scu_scratch_ram_SIZE_IN_DWORDS]; }; /** @@ -1739,7 +1737,7 @@ struct SCU_SCRATCH_RAM { * * */ -struct NOA_PROTOCOL_ENGINE_PARTITION { +struct noa_protocol_engine_partition { u32 reserved[64]; }; @@ -1748,7 +1746,7 @@ struct NOA_PROTOCOL_ENGINE_PARTITION { * * */ -struct NOA_HUB_PARTITION { +struct noa_hub_partition { u32 reserved[64]; }; @@ -1757,38 +1755,38 @@ struct NOA_HUB_PARTITION { * * */ -struct NOA_HOST_INTERFACE_PARTITION { +struct noa_host_interface_partition { u32 reserved[64]; }; /** - * struct TRANSPORT_LINK_LAYER_PAIR - The SCU Hardware pairs up the TL + * struct transport_link_layer_pair - The SCU Hardware pairs up the TL * registers with the LL registers so we must place them adjcent to make the * array of registers in the PEG. * * */ -struct TRANSPORT_LINK_LAYER_PAIR { +struct transport_link_layer_pair { struct scu_transport_layer_registers tl; struct scu_link_layer_registers ll; }; /** - * struct SCU_PEG_REGISTERS - SCU Protocol Engine Memory mapped register space. + * struct scu_peg_registers - SCU Protocol Engine Memory mapped register space. * These registers are unique to each protocol engine group. There can be * at most two PEG for a single SCU part. * * */ -struct SCU_PEG_REGISTERS { - struct TRANSPORT_LINK_LAYER_PAIR pe[4]; +struct scu_peg_registers { + struct transport_link_layer_pair pe[4]; struct scu_port_task_scheduler_group_registers ptsg; - struct SCU_PROTOCOL_ENGINE_GROUP_REGISTERS peg; + struct scu_protocol_engine_group_registers peg; struct scu_sgpio_registers sgpio; u32 reserved_01500_1BFF[0x1C0]; struct scu_viit_entry viit[64]; - struct SCU_ZONE_PARTITION_TABLE zpt0; - struct SCU_ZONE_PARTITION_TABLE zpt1; + struct scu_zone_partition_table zpt0; + struct scu_zone_partition_table zpt1; }; /** @@ -1800,20 +1798,20 @@ struct SCU_PEG_REGISTERS { */ struct scu_registers { /* 0x0000 - PEG 0 */ - struct SCU_PEG_REGISTERS peg0; + struct scu_peg_registers peg0; /* 0x6000 - SDMA and Miscellaneous */ struct scu_sdma_registers sdma; - struct SCU_COMPLETION_RAM cram; - struct SCU_FRAME_BUFFER_RAM fbram; + struct scu_completion_ram cram; + struct scu_frame_buffer_ram fbram; u32 reserved_6800_69FF[0x80]; - struct NOA_PROTOCOL_ENGINE_PARTITION noa_pe; - struct NOA_HUB_PARTITION noa_hub; - struct NOA_HOST_INTERFACE_PARTITION noa_if; + struct noa_protocol_engine_partition noa_pe; + struct noa_hub_partition noa_hub; + struct noa_host_interface_partition noa_if; u32 reserved_6d00_7fff[0x4c0]; /* 0x8000 - PEG 1 */ - struct SCU_PEG_REGISTERS peg1; + struct scu_peg_registers peg1; /* 0xE000 - AFE Registers */ struct scu_afe_registers afe; @@ -1822,9 +1820,7 @@ struct scu_registers { u32 reserved_f000_211fff[0x80c00]; /* 0x212000 - scratch RAM */ - struct SCU_SCRATCH_RAM scratch_ram; - + struct scu_scratch_ram scratch_ram; }; - #endif /* _SCU_REGISTERS_HEADER_ */ diff --git a/drivers/scsi/isci/core/scu_task_context.h b/drivers/scsi/isci/core/scu_task_context.h index 818a575..7df87d9 100644 --- a/drivers/scsi/isci/core/scu_task_context.h +++ b/drivers/scsi/isci/core/scu_task_context.h @@ -65,7 +65,7 @@ /** - * enum SCU_SSP_TASK_TYPE - This enumberation defines the various SSP task + * enum scu_ssp_task_type - This enumberation defines the various SSP task * types the SCU hardware will accept. The definition for the various task * types the SCU hardware will accept can be found in the DS specification. * @@ -78,10 +78,10 @@ typedef enum { SCU_TASK_TYPE_RESPONSE, /* /< Driver generated response frame (targt mode) */ SCU_TASK_TYPE_RAW_FRAME, /* /< Raw frame request type */ SCU_TASK_TYPE_PRIMITIVE /* /< Request for a primitive to be transmitted */ -} SCU_SSP_TASK_TYPE; +} scu_ssp_task_type; /** - * enum SCU_SATA_TASK_TYPE - This enumeration defines the various SATA task + * enum scu_sata_task_type - This enumeration defines the various SATA task * types the SCU hardware will accept. The definition for the various task * types the SCU hardware will accept can be found in the DS specification. * @@ -99,7 +99,7 @@ typedef enum { SCU_TASK_TYPE_DMA_OUT, /* /< Write request */ SCU_TASK_TYPE_FPDMAQ_WRITE, /* /< NCQ write Request */ SCU_TASK_TYPE_PACKET_DMA_OUT /* /< Packet write request */ -} SCU_SATA_TASK_TYPE; +} scu_sata_task_type; /** @@ -290,12 +290,12 @@ typedef enum { #define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07 /** - * struct SSP_TASK_CONTEXT - This is the SCU hardware definition for an SSP + * struct ssp_task_context - This is the SCU hardware definition for an SSP * request. * * */ -struct SSP_TASK_CONTEXT { +struct ssp_task_context { /* OFFSET 0x18 */ u32 reserved00:24; u32 frame_type:8; @@ -324,12 +324,12 @@ struct SSP_TASK_CONTEXT { }; /** - * struct STP_TASK_CONTEXT - This is the SCU hardware definition for an STP + * struct stp_task_context - This is the SCU hardware definition for an STP * request. * * */ -struct STP_TASK_CONTEXT { +struct stp_task_context { /* OFFSET 0x18 */ u32 fis_type:8; u32 pm_port:4; @@ -356,12 +356,12 @@ struct STP_TASK_CONTEXT { }; /** - * struct SMP_TASK_CONTEXT - This is the SCU hardware definition for an SMP + * struct smp_task_context - This is the SCU hardware definition for an SMP * request. * * */ -struct SMP_TASK_CONTEXT { +struct smp_task_context { /* OFFSET 0x18 */ u32 response_length:8; u32 function_result:8; @@ -386,12 +386,12 @@ struct SMP_TASK_CONTEXT { }; /** - * struct PRIMITIVE_TASK_CONTEXT - This is the SCU hardware definition used + * struct primitive_task_context - This is the SCU hardware definition used * when the driver wants to send a primitive on the link. * * */ -struct PRIMITIVE_TASK_CONTEXT { +struct primitive_task_context { /* OFFSET 0x18 */ /** * This field is the control word and it must be 0. @@ -421,13 +421,13 @@ struct PRIMITIVE_TASK_CONTEXT { * The union of the protocols that can be selected in the SCU task context * field. * - * PROTOCOL_CONTEXT + * protocol_context */ -union PROTOCOL_CONTEXT { - struct SSP_TASK_CONTEXT ssp; - struct STP_TASK_CONTEXT stp; - struct SMP_TASK_CONTEXT smp; - struct PRIMITIVE_TASK_CONTEXT primitive; +union protocol_context { + struct ssp_task_context ssp; + struct stp_task_context stp; + struct smp_task_context smp; + struct primitive_task_context primitive; u32 words[6]; }; @@ -502,13 +502,13 @@ struct scu_sgl_element_pair { }; /** - * struct TRANSPORT_SNAPSHOT - This structure is the SCU hardware scratch area + * struct transport_snapshot - This structure is the SCU hardware scratch area * for the task context. This is set to 0 by the driver but can be read by * issuing a dump TC request to the SCU. * * */ -struct TRANSPORT_SNAPSHOT { +struct transport_snapshot { /* OFFSET 0x48 */ u32 xfer_rdy_write_data_length; @@ -639,7 +639,7 @@ struct scu_task_context { /** * This field is programmed with one of the following command type codes * - * For SAS requests use the SCU_SSP_TASK_TYPE + * For SAS requests use the scu_ssp_task_type * - SCU_TASK_TYPE_IOREAD * - SCU_TASK_TYPE_IOWRITE * - SCU_TASK_TYPE_SMP_REQUEST @@ -647,7 +647,7 @@ struct scu_task_context { * - SCU_TASK_TYPE_RAW_FRAME * - SCU_TASK_TYPE_PRIMITIVE * - * For SATA requests use the SCU_SATA_TASK_TYPE + * For SATA requests use the scu_sata_task_type * - SCU_TASK_TYPE_DMA_IN * - SCU_TASK_TYPE_FPDMAQ_READ * - SCU_TASK_TYPE_PACKET_DMA_IN @@ -787,7 +787,7 @@ struct scu_task_context { /** * This union provides for the protocol specif part of the SCU Task Context. */ - union PROTOCOL_CONTEXT type; + union protocol_context type; /* OFFSET 0x30-0x34 */ /** @@ -863,7 +863,7 @@ struct scu_task_context { u32 write_data_length; /* read only set to 0 */ /* OFFSET 0x48-0x58 */ - struct TRANSPORT_SNAPSHOT snapshot; /* read only set to 0 */ + struct transport_snapshot snapshot; /* read only set to 0 */ /* OFFSET 0x5C */ u32 block_protection_enable:1; diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index c2162cf..f079358 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -111,7 +111,7 @@ struct isci_oem_hdr { * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs * being assigned is sufficient to declare manual PORT configuration. */ -enum SCIC_PORT_CONFIGURATION_MODE { +enum scic_port_configuration_mode { SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0, SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1 }; -- cgit v0.10.2 From f219f010a355487638bf2fff4724a420e7158fd2 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Thu, 31 Mar 2011 13:10:34 -0700 Subject: isci: Properly handle requests in the "aborting" state. When a TMF times-out, the request is set back to "aborting". Requests in the "aborting" state must be terminated when LUN and device resets occur. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 4a63bb6..0c08da6 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -199,7 +199,7 @@ static inline enum isci_request_status isci_request_change_started_to_newstate( old_state = isci_request->status; - if (old_state == started) { + if (old_state == started || old_state == aborting) { BUG_ON(isci_request->io_request_completion != NULL); isci_request->io_request_completion = completion_ptr; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 7e96684..338f08e 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -903,7 +903,9 @@ static void isci_terminate_request( new_request_state ); - if ((old_state == started) || (old_state == completed)) { + if ((old_state == started) || + (old_state == completed) || + (old_state == aborting)) { /* If the old_state is started: * This request was not already being aborted. If it had been, @@ -920,6 +922,10 @@ static void isci_terminate_request( * This request completed from the SCU hardware perspective * and now just needs cleaning up in terms of freeing the * request and potentially calling up to libsas. + * + * If old_state == aborting: + * This request has already gone through a TMF timeout, but may + * not have been terminated; needs cleaning up at least. */ isci_terminate_request_core(isci_host, isci_device, isci_request); @@ -1297,14 +1303,16 @@ int isci_task_abort_task(struct sas_task *task) spin_lock_irqsave(&isci_host->scic_lock, flags); - /* Check the request status and change to "aborting" if currently + /* Check the request status and change to "aborted" if currently * "starting"; if true then set the I/O kernel completion * struct that will be triggered when the request completes. */ old_state = isci_task_validate_request_to_abort( old_request, isci_host, isci_device, &aborted_io_completion); - if ((old_state != started) && (old_state != completed)) { + if ((old_state != started) && + (old_state != completed) && + (old_state != aborting)) { spin_unlock_irqrestore(&isci_host->scic_lock, flags); -- cgit v0.10.2 From ce4f75def3999fbe454da9aa733ed322bc671b06 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Thu, 31 Mar 2011 13:10:36 -0700 Subject: isci: Free host lock for SATA/STP abort escalation at submission time. In the case of I/O requests that fail at submit time because of a pending reset condition, the host lock for SATA/STP devices must be managed for any SCSI-initiated I/O before sas_task_abort is called. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index c6ce9d0..946caae 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include "isci.h" #include "scic_remote_device.h" #include "scic_io_request.h" @@ -356,33 +357,6 @@ int isci_request_alloc_tmf( } /** - * isci_request_signal_device_reset() - This function will set the "device - * needs target reset" flag in the given sas_tasks' task_state_flags, and - * then cause the task to be added into the SCSI error handler queue which - * will eventually be escalated to a target reset. - * - * - */ -static void isci_request_signal_device_reset( - struct isci_request *isci_request) -{ - unsigned long flags; - struct sas_task *task = isci_request_access_task(isci_request); - - dev_dbg(&isci_request->isci_host->pdev->dev, - "%s: request=%p, task=%p\n", __func__, isci_request, task); - - spin_lock_irqsave(&task->task_state_lock, flags); - task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; - spin_unlock_irqrestore(&task->task_state_lock, flags); - - /* Cause this task to be scheduled in the SCSI error handler - * thread. - */ - sas_task_abort(task); -} - -/** * isci_request_execute() - This function allocates the isci_request object, * all fills in some common fields. * @isci_host: This parameter specifies the ISCI host object @@ -453,11 +427,18 @@ int isci_request_execute( /* Save the tag for possible task mgmt later. */ request->io_tag = scic_io_request_get_io_tag( request->sci_request_handle); + } else { + /* The request did not really start in the + * hardware, so clear the request handle + * here so no terminations will be done. + */ + request->sci_request_handle = NULL; } + } else dev_warn(&isci_host->pdev->dev, - "%s: failed request start\n", - __func__); + "%s: failed request start (0x%x)\n", + __func__, status); spin_unlock_irqrestore(&isci_host->scic_lock, flags); @@ -467,7 +448,26 @@ int isci_request_execute( * handler thread to work on this I/O and that * we want a device reset. */ - isci_request_signal_device_reset(request); + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Cause this task to be scheduled in the SCSI error handler + * thread. + */ + if (dev_is_sata(task->dev)) { + /* Since we are still in the submit path, and since + * libsas takes the host lock on behalf of SATA + * devices before I/O starts, we need to unlock + * before we can put the task in the error path. + */ + raw_local_irq_save(flags); + spin_unlock(isci_host->shost->host_lock); + sas_task_abort(task); + spin_lock(isci_host->shost->host_lock); + raw_local_irq_restore(flags); + } else + sas_task_abort(task); /* Change the status, since we are holding * the I/O until it is managed by the SCSI -- cgit v0.10.2 From 26e953bc6ec11c9e81ad8e9a59b14cf260776007 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Thu, 31 Mar 2011 13:10:38 -0700 Subject: isci: Fix use of SATA soft reset state machine. The driver SATA LUN reset function incorrectly sent an SRST deassert FIS, which is unnecessary because the core initiates the entire SATA soft reset state machine from the assert request. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 7a1b586..794ab7c 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -301,8 +301,8 @@ int isci_task_send_lu_reset_sata( int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; - /* Send the initial SRST to the target */ - #define ISCI_SRST_TIMEOUT_MS 20 /* 20 ms timeout. */ + /* Send the soft reset to the target */ + #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ isci_task_build_tmf(&tmf, isci_device, isci_tmf_sata_srst_high, NULL, NULL ); @@ -319,38 +319,6 @@ int isci_task_send_lu_reset_sata( /* Return the failure so that the LUN reset is escalated * to a target reset. */ - goto out; } - - /* Leave SRST high for a bit. */ - #define ISCI_SRST_ASSERT_DELAY 100 /* usecs */ - udelay(ISCI_SRST_ASSERT_DELAY); - - /* Deassert SRST. */ - isci_task_build_tmf(&tmf, isci_device, isci_tmf_sata_srst_low, - NULL, NULL - ); - ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_SRST_TIMEOUT_MS); - - if (ret == TMF_RESP_FUNC_COMPLETE) - dev_dbg(&isci_host->pdev->dev, - "%s: SATA LUN reset passed (%p)\n", - __func__, - isci_device); - else - dev_warn(&isci_host->pdev->dev, - "%s: Deassert SRST failed (%p)=%x\n", - __func__, - isci_device, - ret); - - out: - spin_lock_irqsave(&isci_host->scic_lock, flags); - - /* Resume the device. */ - scic_sds_remote_device_resume(to_sci_dev(isci_device)); - - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - return ret; } -- cgit v0.10.2 From ed8a72d108bd951909b28fa4a89aad6489f414e1 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Thu, 31 Mar 2011 13:10:40 -0700 Subject: isci: Qualify when the host lock is managed for STP/SATA callbacks. In the case of internal discovery related STP/SATA I/O started through sas_execute_task the host lock is not taken by libsas before calling lldd_execute_task, so the lock should not be managed before calling back to libsas through task->task_done or sas_task_abort. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 946caae..b519373 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -53,7 +53,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include #include "isci.h" #include "scic_remote_device.h" #include "scic_io_request.h" @@ -452,22 +451,11 @@ int isci_request_execute( task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; spin_unlock_irqrestore(&task->task_state_lock, flags); - /* Cause this task to be scheduled in the SCSI error handler - * thread. + /* Cause this task to be scheduled in the SCSI error + * handler thread. */ - if (dev_is_sata(task->dev)) { - /* Since we are still in the submit path, and since - * libsas takes the host lock on behalf of SATA - * devices before I/O starts, we need to unlock - * before we can put the task in the error path. - */ - raw_local_irq_save(flags); - spin_unlock(isci_host->shost->host_lock); - sas_task_abort(task); - spin_lock(isci_host->shost->host_lock); - raw_local_irq_restore(flags); - } else - sas_task_abort(task); + isci_execpath_callback(isci_host, task, + sas_task_abort); /* Change the status, since we are holding * the I/O until it is managed by the SCSI diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 794ab7c..c941d909 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -299,7 +299,6 @@ int isci_task_send_lu_reset_sata( { struct isci_tmf tmf; int ret = TMF_RESP_FUNC_FAILED; - unsigned long flags; /* Send the soft reset to the target */ #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 338f08e..5bcea60 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -55,7 +55,6 @@ #include #include -#include #include "scic_task_request.h" #include "scic_remote_device.h" #include "scic_io_request.h" @@ -93,26 +92,13 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, case isci_perform_normal_io_completion: /* Normal notification (task_done) */ dev_dbg(&ihost->pdev->dev, - "%s: Normal - task = %p, response=%d, status=%d\n", + "%s: Normal - task = %p, response=%d, " + "status=%d\n", __func__, task, response, status); task->lldd_task = NULL; - if (dev_is_sata(task->dev)) { - /* Since we are still in the submit path, and since - * libsas takes the host lock on behalf of SATA - * devices before I/O starts, we need to unlock - * before we can call back and report the I/O - * submission error. - */ - unsigned long flags; - raw_local_irq_save(flags); - spin_unlock(ihost->shost->host_lock); - task->task_done(task); - spin_lock(ihost->shost->host_lock); - raw_local_irq_restore(flags); - } else - task->task_done(task); + isci_execpath_callback(ihost, task, task->task_done); break; case isci_perform_aborted_io_completion: @@ -120,16 +106,19 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, * abort path. */ dev_warn(&ihost->pdev->dev, - "%s: Aborted - task = %p, response=%d, status=%d\n", + "%s: Aborted - task = %p, response=%d, " + "status=%d\n", __func__, task, response, status); break; case isci_perform_error_io_completion: /* Use sas_task_abort */ dev_warn(&ihost->pdev->dev, - "%s: Error - task = %p, response=%d, status=%d\n", + "%s: Error - task = %p, response=%d, " + "status=%d\n", __func__, task, response, status); - sas_task_abort(task); + + isci_execpath_callback(ihost, task, sas_task_abort); break; default: diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index d7cb6fe..c5afd1c 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -56,6 +56,8 @@ #if !defined(_ISCI_TASK_H_) #define _ISCI_TASK_H_ +#include + struct isci_request; struct isci_host; @@ -332,5 +334,40 @@ isci_task_set_completion_status( return task_notification_selection; } +/** +* isci_execpath_callback() - This function is called from the task +* execute path when the task needs to callback libsas about the submit-time +* task failure. The callback occurs either through the task's done function +* or through sas_task_abort. In the case of regular non-discovery SATA/STP I/O +* requests, libsas takes the host lock before calling execute task. Therefore +* in this situation the host lock must be managed before calling the func. +* +* @ihost: This parameter is the controller to which the I/O request was sent. +* @task: This parameter is the I/O request. +* @func: This parameter is the function to call in the correct context. +* @status: This parameter is the status code for the completed task. +* +*/ +static inline void isci_execpath_callback( + struct isci_host *ihost, + struct sas_task *task, + void (*func)(struct sas_task *)) +{ + unsigned long flags; + + if (dev_is_sata(task->dev) && task->uldd_task) { + /* Since we are still in the submit path, and since + * libsas takes the host lock on behalf of SATA + * devices before I/O starts (in the non-discovery case), + * we need to unlock before we can call the callback function. + */ + raw_local_irq_save(flags); + spin_unlock(ihost->shost->host_lock); + func(task); + spin_lock(ihost->shost->host_lock); + raw_local_irq_restore(flags); + } else + func(task); +} #endif /* !defined(_SCI_TASK_H_) */ -- cgit v0.10.2 From 037afc7812e2b202fbc18218e6c0eff34dad36ed Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 31 Mar 2011 13:10:42 -0700 Subject: isci: cleanup isci_remote_device[_not]_ready interface Require a valid isci_host in support of the general cleanup to not re-lookup the host via potentially fragile methods when more robust methods are available. Also cleans up some more casting that should be using container_of() to up-cast a base structure in a more type-safe manner. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index e100fde..a6bcaa1 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1513,24 +1513,19 @@ static void scic_sds_remote_device_stopped_state_enter( * sets the starting state handlers, sets the device not ready, and posts the * remote node context to the hardware. none */ -static void scic_sds_remote_device_starting_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object) { - struct scic_sds_controller *scic; - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); - scic = scic_sds_remote_device_get_controller(sci_dev); - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STARTING); + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STARTING); - isci_remote_device_not_ready( - idev, - SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); } static void scic_sds_remote_device_starting_state_exit(struct sci_base_object *object) @@ -1556,14 +1551,13 @@ static void scic_sds_remote_device_starting_state_exit(struct sci_base_object *o * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it sets * the ready state handlers, and starts the ready substate machine. none */ -static void scic_sds_remote_device_ready_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); - struct scic_sds_controller *scic - = scic_sds_remote_device_get_controller(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, @@ -1574,7 +1568,7 @@ static void scic_sds_remote_device_ready_state_enter( if (sci_dev->has_ready_substate_machine) sci_base_state_machine_start(&sci_dev->ready_substate_machine); else - isci_remote_device_ready(idev); + isci_remote_device_ready(ihost, idev); } /** @@ -1588,16 +1582,18 @@ static void scic_sds_remote_device_ready_state_enter( static void scic_sds_remote_device_ready_state_exit( struct sci_base_object *object) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)object; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); if (sci_dev->has_ready_substate_machine) sci_base_state_machine_stop(&sci_dev->ready_substate_machine); - else - isci_remote_device_not_ready( - idev, - SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); + else { + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); + } } /** diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index 5520248..06cb932 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -253,20 +253,19 @@ static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_dev * This function sets the ready cmd substate handlers and reports the device as * ready. none */ -static inline void scic_sds_smp_remote_device_ready_idle_substate_enter( - struct sci_base_object *object) +static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_object *object) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); + SET_STATE_HANDLER(sci_dev, + scic_sds_smp_remote_device_ready_substate_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - SET_STATE_HANDLER( - sci_dev, - scic_sds_smp_remote_device_ready_substate_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - - isci_remote_device_ready(idev); + isci_remote_device_ready(ihost, idev); } /** @@ -281,20 +280,20 @@ static inline void scic_sds_smp_remote_device_ready_idle_substate_enter( static void scic_sds_smp_remote_device_ready_cmd_substate_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); BUG_ON(sci_dev->working_request == NULL); - SET_STATE_HANDLER( - sci_dev, - scic_sds_smp_remote_device_ready_substate_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + SET_STATE_HANDLER(sci_dev, + scic_sds_smp_remote_device_ready_substate_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - isci_remote_device_not_ready( - idev, - SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } /** @@ -304,12 +303,11 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter( * * This is the SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_CMD exit method. none */ -static void scic_sds_smp_remote_device_ready_cmd_substate_exit( - struct sci_base_object *object) +static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; - - this_device->working_request = NULL; + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + sci_dev->working_request = NULL; } /* --------------------------------------------------------------------------- */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index 193a95f..0a00a40 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -677,13 +677,13 @@ static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_dev * * STP REMOTE DEVICE READY SUBSTATE PRIVATE METHODS * ***************************************************************************** */ -static inline void -scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( - void *user_cookie) +static void +scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *user_cookie) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)user_cookie; + struct scic_sds_remote_device *sci_dev = user_cookie; struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); /* * For NCQ operation we do not issue a @@ -692,7 +692,7 @@ scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( */ if (sci_dev->ready_substate_machine.previous_state_id != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) - isci_remote_device_ready(idev); + isci_remote_device_ready(ihost, idev); } /* @@ -737,87 +737,48 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter( } } -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY CMD SUBSTATE - * ***************************************************************************** */ - -/** - * - * @device: This is the SCI base object which is cast into a - * struct scic_sds_remote_device object. - * - */ -static inline void scic_sds_stp_remote_device_ready_cmd_substate_enter( - struct sci_base_object *device) +static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_object *object) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)device; + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); BUG_ON(sci_dev->working_request == NULL); - SET_STATE_HANDLER( - sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + SET_STATE_HANDLER(sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - isci_remote_device_not_ready( - idev, - SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY NCQ SUBSTATE - * ***************************************************************************** */ - -/** - * - * @device: This is the SCI base object which is cast into a - * struct scic_sds_remote_device object. - * - */ -static void scic_sds_stp_remote_device_ready_ncq_substate_enter( - struct sci_base_object *device) +static void scic_sds_stp_remote_device_ready_ncq_substate_enter(struct sci_base_object *object) { - struct scic_sds_remote_device *this_device; - - this_device = (struct scic_sds_remote_device *)device; - - SET_STATE_HANDLER( - this_device, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ - ); + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + SET_STATE_HANDLER(sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); } -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY NCQ ERROR SUBSTATE - * ***************************************************************************** */ - -/** - * - * @device: This is the SCI base object which is cast into a - * struct scic_sds_remote_device object. - * - */ -static inline void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( - struct sci_base_object *device) +static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_object *object) { - struct scic_sds_remote_device *sci_dev = - (struct scic_sds_remote_device *)device; + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent.parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); - SET_STATE_HANDLER( - sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + SET_STATE_HANDLER(sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); if (sci_dev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) - isci_remote_device_not_ready(idev, sci_dev->not_ready_reason); + isci_remote_device_not_ready(ihost, idev, sci_dev->not_ready_reason); } /* diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 6fe6815..0fdaa6d 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -281,13 +281,12 @@ isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) * isci_remote_device_ready() - This function is called by the scic when the * remote device is ready. We mark the isci device as ready and signal the * waiting proccess. - * @idev: This parameter specifies the remote device + * @ihost: our valid isci_host + * @idev: remote device * */ -void isci_remote_device_ready(struct isci_remote_device *idev) +void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev) { - struct isci_host *ihost = idev->isci_port->isci_host; - dev_dbg(&ihost->pdev->dev, "%s: idev = %p\n", __func__, idev); @@ -304,18 +303,17 @@ void isci_remote_device_ready(struct isci_remote_device *idev) * @isci_device: This parameter specifies the remote device * */ -void isci_remote_device_not_ready( - struct isci_remote_device *isci_device, - u32 reason_code) +void isci_remote_device_not_ready(struct isci_host *ihost, + struct isci_remote_device *idev, u32 reason) { - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); - if (reason_code == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) - isci_remote_device_change_state(isci_device, isci_stopping); + if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) + isci_remote_device_change_state(idev, isci_stopping); else /* device ready is actually a "not ready for io" state. */ - isci_remote_device_change_state(isci_device, isci_ready); + isci_remote_device_change_state(idev, isci_ready); } /** diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index f45a5f0..cf5302a 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -109,12 +109,11 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, void isci_remote_device_nuke_requests( struct isci_remote_device *isci_device); -void isci_remote_device_ready( - struct isci_remote_device *); +void isci_remote_device_ready(struct isci_host *ihost, + struct isci_remote_device *idev); -void isci_remote_device_not_ready( - struct isci_remote_device *, - u32); +void isci_remote_device_not_ready(struct isci_host *ihost, + struct isci_remote_device *idev, u32 reason); void isci_remote_device_gone( struct domain_device *domain_dev); -- cgit v0.10.2 From 4393aa4e6b9517a666f0ef6b774fd421a9dc4c68 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 31 Mar 2011 13:10:44 -0700 Subject: isci: fix fragile/conditional isci_host lookups A domain_device can always reference back to ->lldd_ha unlike local lldd structures. Fix up cases where the driver uses local objects to look up the isci_host. This also changes the calling conventions of some routines to expect a valid isci_host parameter rather than re-lookup the pointer on entry. Incidentally cleans up some macros that are longer to type than the open-coded equivalent: isci_host_from_sas_ha isci_dev_from_domain_dev Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 79515be..6644959 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -129,7 +129,7 @@ void isci_host_start_complete(struct isci_host *ihost, enum sci_status completio int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) { - struct isci_host *ihost = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); + struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; if (test_bit(IHOST_START_PENDING, &ihost->flags)) return 0; @@ -149,7 +149,7 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) void isci_host_scan_start(struct Scsi_Host *shost) { - struct isci_host *ihost = isci_host_from_sas_ha(SHOST_TO_SAS_HA(shost)); + struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; struct scic_sds_controller *scic = ihost->core_controller; unsigned long tmo = scic_controller_get_suggested_start_timeout(scic); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index d012b69..8372094 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -233,15 +233,10 @@ static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_rem wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags)); } -/** - * isci_host_from_sas_ha() - This accessor retrieves the isci_host object - * reference from the Linux sas_ha_struct reference. - * @ha_struct,: This parameter points to the Linux sas_ha_struct object - * - * A reference to the associated isci_host structure. - */ -#define isci_host_from_sas_ha(ha_struct) \ - ((struct isci_host *)(ha_struct)->lldd_ha) +static inline struct isci_host *dev_to_ihost(struct domain_device *dev) +{ + return dev->port->ha->lldd_ha; +} /** * isci_host_scan_finished() - diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index decc0c0..9e081a4 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -163,7 +163,7 @@ int isci_phy_control(struct asd_sas_phy *sas_phy, return -ENODEV; /* Perform the port reset. */ - ret = isci_port_perform_hard_reset(iport, iphy); + ret = isci_port_perform_hard_reset(ihost, iport, iphy); break; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 74dc96d..b675a94 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -400,55 +400,43 @@ void isci_port_hard_reset_complete(struct isci_port *isci_port, complete_all(&isci_port->hard_reset_complete); } -/** - * isci_port_perform_hard_reset() - This function is one of the SAS Domain - * Template functions. This is a phy management function. - * @isci_port: - * @isci_phy: - * - * status, TMF_RESP_FUNC_COMPLETE indicates success. - */ -int isci_port_perform_hard_reset( - struct isci_port *isci_port, - struct isci_phy *isci_phy) + +int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) { + unsigned long flags; enum sci_status status; int ret = TMF_RESP_FUNC_COMPLETE; - unsigned long flags; + dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n", + __func__, iport); - dev_dbg(&isci_port->isci_host->pdev->dev, - "%s: isci_port = %p\n", - __func__, isci_port); - - BUG_ON(isci_port == NULL); - - init_completion(&isci_port->hard_reset_complete); + init_completion(&iport->hard_reset_complete); - spin_lock_irqsave(&isci_port->isci_host->scic_lock, flags); + spin_lock_irqsave(&ihost->scic_lock, flags); #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT - status = scic_port_hard_reset(isci_port->sci_port_handle, + status = scic_port_hard_reset(iport->sci_port_handle, ISCI_PORT_RESET_TIMEOUT); - spin_unlock_irqrestore(&isci_port->isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); if (status == SCI_SUCCESS) { - wait_for_completion(&isci_port->hard_reset_complete); + wait_for_completion(&iport->hard_reset_complete); - dev_dbg(&isci_port->isci_host->pdev->dev, - "%s: isci_port = %p; hard reset completion\n", - __func__, isci_port); + dev_dbg(&ihost->pdev->dev, + "%s: iport = %p; hard reset completion\n", + __func__, iport); - if (isci_port->hard_reset_status != SCI_SUCCESS) + if (iport->hard_reset_status != SCI_SUCCESS) ret = TMF_RESP_FUNC_FAILED; } else { ret = TMF_RESP_FUNC_FAILED; - dev_err(&isci_port->isci_host->pdev->dev, - "%s: isci_port = %p; scic_port_hard_reset call" + dev_err(&ihost->pdev->dev, + "%s: iport = %p; scic_port_hard_reset call" " failed 0x%x\n", - __func__, isci_port, status); + __func__, iport, status); } @@ -456,19 +444,12 @@ int isci_port_perform_hard_reset( * the same as link failures on all phys in the port. */ if (ret != TMF_RESP_FUNC_COMPLETE) { - BUG_ON(isci_port->isci_host == NULL); - - dev_err(&isci_port->isci_host->pdev->dev, - "%s: isci_port = %p; hard reset failed " + dev_err(&ihost->pdev->dev, + "%s: iport = %p; hard reset failed " "(0x%x) - sending link down to libsas for phy %p\n", - __func__, - isci_port, - isci_port->hard_reset_status, - isci_phy); - - isci_port_link_down(isci_port->isci_host, - isci_phy, - isci_port); + __func__, iport, iport->hard_reset_status, iphy); + + isci_port_link_down(ihost, iphy, iport); } return ret; @@ -491,8 +472,7 @@ void isci_port_invalid_link_up(struct scic_sds_controller *scic, struct scic_sds_port *sci_port, struct scic_sds_phy *phy) { - struct isci_host *ihost = - (struct isci_host *)sci_object_get_association(scic); + struct isci_host *ihost = sci_object_get_association(scic); dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index dfdd12a..76546fd 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -143,9 +143,8 @@ void isci_port_hard_reset_complete( struct isci_port *isci_port, enum sci_status completion_status); -int isci_port_perform_hard_reset( - struct isci_port *isci_port_ptr, - struct isci_phy *isci_phy_ptr); +int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy); void isci_port_invalid_link_up( struct scic_sds_controller *scic, diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 0fdaa6d..ab638ec 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -218,33 +218,20 @@ static enum sci_status isci_remote_device_construct( return status; } - -/** - * isci_remote_device_nuke_requests() - This function terminates all requests - * for a given remote device. - * @isci_device: This parameter specifies the remote device - * - */ -void isci_remote_device_nuke_requests( - struct isci_remote_device *isci_device) +void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev) { DECLARE_COMPLETION_ONSTACK(aborted_task_completion); - struct isci_host *isci_host; - isci_host = isci_device->isci_port->isci_host; - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", __func__, idev); /* Cleanup all requests pending for this device. */ - isci_terminate_pending_requests(isci_host, isci_device, terminating); + isci_terminate_pending_requests(ihost, idev, terminating); - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p, done\n", __func__, isci_device); + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p, done\n", __func__, idev); } - - /** * This function builds the isci_remote_device when a libsas dev_found message * is received. @@ -380,7 +367,7 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem isci_remote_device_change_state(idev, isci_stopping); /* Kill all outstanding requests. */ - isci_remote_device_nuke_requests(idev); + isci_remote_device_nuke_requests(ihost, idev); set_bit(IDEV_STOP_PENDING, &idev->flags); @@ -409,7 +396,7 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem */ void isci_remote_device_gone(struct domain_device *dev) { - struct isci_host *ihost = dev->port->ha->lldd_ha; + struct isci_host *ihost = dev_to_ihost(dev); struct isci_remote_device *idev = dev->lldd_dev; dev_dbg(&ihost->pdev->dev, @@ -431,7 +418,7 @@ void isci_remote_device_gone(struct domain_device *dev) */ int isci_remote_device_found(struct domain_device *domain_dev) { - struct isci_host *isci_host; + struct isci_host *isci_host = dev_to_ihost(domain_dev); struct isci_port *isci_port; struct isci_phy *isci_phy; struct asd_sas_port *sas_port; @@ -439,8 +426,6 @@ int isci_remote_device_found(struct domain_device *domain_dev) struct isci_remote_device *isci_device; enum sci_status status; - isci_host = isci_host_from_sas_ha(domain_dev->port->ha); - dev_dbg(&isci_host->pdev->dev, "%s: domain_device = %p\n", __func__, domain_dev); @@ -556,41 +541,22 @@ bool isci_device_is_reset_pending( * * true if there is a reset pending for the device. */ -void isci_device_clear_reset_pending(struct isci_remote_device *isci_device) +void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev) { struct isci_request *isci_request; struct isci_request *tmp_req; - struct isci_host *isci_host = NULL; unsigned long flags = 0; - /* FIXME more port gone confusion, and this time it makes the - * locking "fun" - */ - if (isci_device->isci_port != NULL) - isci_host = isci_device->isci_port->isci_host; - - /* - * FIXME when the isci_host gets sorted out - * use dev_dbg() - */ - pr_debug("%s: isci_device=%p, isci_host=%p\n", - __func__, isci_device, isci_host); + dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n", + __func__, idev, ihost); - if (isci_host != NULL) - spin_lock_irqsave(&isci_host->scic_lock, flags); - else - pr_err("%s: isci_device %p; isci_host == NULL!\n", - __func__, isci_device); + spin_lock_irqsave(&ihost->scic_lock, flags); /* Clear reset pending on all pending requests. */ list_for_each_entry_safe(isci_request, tmp_req, - &isci_device->reqs_in_process, dev_node) { - /* - * FIXME when the conditional spinlock is gone - * change to dev_dbg() - */ - pr_debug("%s: isci_device = %p request = %p\n", - __func__, isci_device, isci_request); + &idev->reqs_in_process, dev_node) { + dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n", + __func__, idev, isci_request); if (isci_request->ttype == io_task) { @@ -603,9 +569,7 @@ void isci_device_clear_reset_pending(struct isci_remote_device *isci_device) spin_unlock_irqrestore(&task->task_state_lock, flags2); } } - - if (isci_host != NULL) - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); } /** diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index cf5302a..9925316 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -78,59 +78,29 @@ static inline struct scic_sds_remote_device *to_sci_dev(struct isci_remote_devic return (struct scic_sds_remote_device *) &idev[1]; } -#define to_isci_remote_device(p) \ - container_of(p, struct isci_remote_device, sci_remote_device); - #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 - -/** - * isci_dev_from_domain_dev() - This accessor retrieves the remote_device - * object reference from the Linux domain_device reference. - * @domdev,: This parameter points to the Linux domain_device object . - * - * A reference to the associated isci remote device. - */ -#define isci_dev_from_domain_dev(domdev) \ - ((struct isci_remote_device *)(domdev)->lldd_dev) - -void isci_remote_device_start_complete( - struct isci_host *, - struct isci_remote_device *, - enum sci_status); - -void isci_remote_device_stop_complete( - struct isci_host *, - struct isci_remote_device *, - enum sci_status); - +void isci_remote_device_start_complete(struct isci_host *ihost, + struct isci_remote_device *idev, + enum sci_status); +void isci_remote_device_stop_complete(struct isci_host *ihost, + struct isci_remote_device *idev, + enum sci_status); enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev); -void isci_remote_device_nuke_requests( - struct isci_remote_device *isci_device); - +void isci_remote_device_nuke_requests(struct isci_host *ihost, + struct isci_remote_device *idev); void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev); - void isci_remote_device_not_ready(struct isci_host *ihost, struct isci_remote_device *idev, u32 reason); - -void isci_remote_device_gone( - struct domain_device *domain_dev); - -int isci_remote_device_found( - struct domain_device *domain_dev); - -bool isci_device_is_reset_pending( - struct isci_host *isci_host, - struct isci_remote_device *isci_device); - -void isci_device_clear_reset_pending( - struct isci_remote_device *isci_device); - -void isci_remote_device_change_state( - struct isci_remote_device *isci_device, - enum isci_status status); +void isci_remote_device_gone(struct domain_device *domain_dev); +int isci_remote_device_found(struct domain_device *domain_dev); +bool isci_device_is_reset_pending(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_device_clear_reset_pending(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_change_state(struct isci_remote_device *idev, + enum isci_status status); #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ - diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index b519373..37ffedc 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -379,7 +379,7 @@ int isci_request_execute( struct isci_request *request; unsigned long flags; - isci_device = isci_dev_from_domain_dev(task->dev); + isci_device = task->dev->lldd_dev; sci_device = to_sci_dev(isci_device); /* do common allocation and init of request object. */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 5bcea60..c6c97ad 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -146,7 +146,7 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, */ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) { - struct isci_host *ihost = task->dev->port->ha->lldd_ha; + struct isci_host *ihost = dev_to_ihost(task->dev); struct isci_request *request = NULL; struct isci_remote_device *device; unsigned long flags; @@ -169,7 +169,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) "task = %p, num = %d; dev = %p; cmd = %p\n", task, num, task->dev, task->uldd_task); - device = isci_dev_from_domain_dev(task->dev); + device = task->dev->lldd_dev; if (device) device_status = device->status; @@ -593,7 +593,6 @@ static void isci_task_build_abort_task_tmf( static struct isci_request *isci_task_get_request_from_task( struct sas_task *task, - struct isci_host **isci_host, struct isci_remote_device **isci_device) { @@ -609,9 +608,6 @@ static struct isci_request *isci_task_get_request_from_task( (task->task_state_flags & SAS_TASK_AT_INITIATOR) && (request != NULL)) { - if (isci_host != NULL) - *isci_host = request->isci_host; - if (isci_device != NULL) *isci_device = request->isci_device; } @@ -1027,26 +1023,17 @@ static int isci_task_send_lu_reset_sas( * * status, zero indicates success. */ -int isci_task_lu_reset( - struct domain_device *domain_device, - u8 *lun) +int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) { - struct isci_host *isci_host = NULL; + struct isci_host *isci_host = dev_to_ihost(domain_device); struct isci_remote_device *isci_device = NULL; int ret; bool device_stopping = false; - if (domain_device == NULL) { - pr_warn("%s: domain_device == NULL\n", __func__); - return TMF_RESP_FUNC_FAILED; - } - - isci_device = isci_dev_from_domain_dev(domain_device); - - if (domain_device->port != NULL) - isci_host = isci_host_from_sas_ha(domain_device->port->ha); + isci_device = domain_device->lldd_dev; - pr_debug("%s: domain_device=%p, isci_host=%p; isci_device=%p\n", + dev_dbg(&isci_host->pdev->dev, + "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", __func__, domain_device, isci_host, isci_device); if (isci_device != NULL) @@ -1057,24 +1044,18 @@ int isci_task_lu_reset( * device's list, fail this LUN reset request in order to * escalate to the device reset. */ - if ((isci_device == NULL) || - (isci_host == NULL) || - ((isci_host != NULL) && - (isci_device != NULL) && - (device_stopping || - (isci_device_is_reset_pending(isci_host, isci_device))))) { + if (!isci_device || device_stopping || + isci_device_is_reset_pending(isci_host, isci_device)) { dev_warn(&isci_host->pdev->dev, - "%s: No dev (%p), no host (%p), or " + "%s: No dev (%p), or " "RESET PENDING: domain_device=%p\n", - __func__, isci_device, isci_host, domain_device); + __func__, isci_device, domain_device); return TMF_RESP_FUNC_FAILED; } /* Send the task management part of the reset. */ if (sas_protocol_ata(domain_device->tproto)) { - ret = isci_task_send_lu_reset_sata( - isci_host, isci_device, lun - ); + ret = isci_task_send_lu_reset_sata(isci_host, isci_device, lun); } else ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun); @@ -1173,11 +1154,11 @@ static void isci_abort_task_process_cb( */ int isci_task_abort_task(struct sas_task *task) { + struct isci_host *isci_host = dev_to_ihost(task->dev); DECLARE_COMPLETION_ONSTACK(aborted_io_completion); struct isci_request *old_request = NULL; enum isci_request_status old_state; struct isci_remote_device *isci_device = NULL; - struct isci_host *isci_host = NULL; struct isci_tmf tmf; int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; @@ -1189,8 +1170,7 @@ int isci_task_abort_task(struct sas_task *task) * in the device, because tasks driving resets may land here * after completion in the core. */ - old_request = isci_task_get_request_from_task(task, &isci_host, - &isci_device); + old_request = isci_task_get_request_from_task(task, &isci_device); dev_dbg(&isci_host->pdev->dev, "%s: task = %p\n", __func__, task); @@ -1610,37 +1590,29 @@ u32 isci_task_ssp_request_get_response_data_length( */ int isci_bus_reset_handler(struct scsi_cmnd *cmd) { + struct domain_device *dev = cmd_to_domain_dev(cmd); + struct isci_host *isci_host = dev_to_ihost(dev); unsigned long flags = 0; - struct isci_host *isci_host = NULL; enum sci_status status; int base_status; - struct isci_remote_device *isci_dev - = isci_dev_from_domain_dev( - sdev_to_domain_dev(cmd->device)); + struct isci_remote_device *isci_dev = dev->lldd_dev; - dev_dbg(&cmd->device->sdev_gendev, + dev_dbg(&isci_host->pdev->dev, "%s: cmd %p, isci_dev %p\n", __func__, cmd, isci_dev); if (!isci_dev) { - dev_warn(&cmd->device->sdev_gendev, + dev_warn(&isci_host->pdev->dev, "%s: isci_dev is GONE!\n", __func__); return TMF_RESP_FUNC_COMPLETE; /* Nothing to reset. */ } - if (isci_dev->isci_port != NULL) - isci_host = isci_dev->isci_port->isci_host; - - if (isci_host != NULL) - spin_lock_irqsave(&isci_host->scic_lock, flags); - + spin_lock_irqsave(&isci_host->scic_lock, flags); status = scic_remote_device_reset(to_sci_dev(isci_dev)); if (status != SCI_SUCCESS) { - - if (isci_host != NULL) - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); scmd_printk(KERN_WARNING, cmd, "%s: scic_remote_device_reset(%p) returned %d!\n", @@ -1648,14 +1620,13 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) return TMF_RESP_FUNC_FAILED; } - if (isci_host != NULL) - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); /* Make sure all pending requests are able to be fully terminated. */ - isci_device_clear_reset_pending(isci_dev); + isci_device_clear_reset_pending(isci_host, isci_dev); /* Terminate in-progress I/O now. */ - isci_remote_device_nuke_requests(isci_dev); + isci_remote_device_nuke_requests(isci_host, isci_dev); /* Call into the libsas default handler (which calls sas_phy_reset). */ base_status = sas_eh_bus_reset_handler(cmd); @@ -1672,13 +1643,9 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) } /* WHAT TO DO HERE IF sas_phy_reset FAILS? */ - - if (isci_host != NULL) - spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock_irqsave(&isci_host->scic_lock, flags); status = scic_remote_device_reset_complete(to_sci_dev(isci_dev)); - - if (isci_host != NULL) - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); if (status != SCI_SUCCESS) { scmd_printk(KERN_WARNING, cmd, @@ -1688,7 +1655,7 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) } /* WHAT TO DO HERE IF scic_remote_device_reset_complete FAILS? */ - dev_dbg(&cmd->device->sdev_gendev, + dev_dbg(&isci_host->pdev->dev, "%s: cmd %p, isci_dev %p complete.\n", __func__, cmd, isci_dev); -- cgit v0.10.2 From bc99aa47108e9fd759071d4741c7abdf7b903579 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 27 Mar 2011 20:07:54 -0400 Subject: isci: remove mmio wrappers Remove a couple of layers around read/writel to make the driver readable. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 9266fbe..774c4b3 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -59,8 +59,7 @@ #include "scic_port.h" #include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_controller_registers.h" -#include "scic_sds_pci.h" +#include "scu_registers.h" #include "scic_sds_phy.h" #include "scic_sds_port_configuration_agent.h" #include "scic_sds_port.h" @@ -355,7 +354,10 @@ static void scic_sds_controller_ram_initialization( * Therefore it no longer comes out of memory in the MDL. */ mde = &this_controller->memory_descriptors[SCU_MDE_COMPLETION_QUEUE]; this_controller->completion_queue = (u32 *)mde->virtual_address; - SMU_CQBAR_WRITE(this_controller, mde->physical_address); + writel(lower_32_bits(mde->physical_address), \ + &this_controller->smu_registers->completion_queue_lower); + writel(upper_32_bits(mde->physical_address), + &this_controller->smu_registers->completion_queue_upper); /* * Program the location of the Remote Node Context table @@ -363,13 +365,19 @@ static void scic_sds_controller_ram_initialization( mde = &this_controller->memory_descriptors[SCU_MDE_REMOTE_NODE_CONTEXT]; this_controller->remote_node_context_table = (union scu_remote_node_context *) mde->virtual_address; - SMU_RNCBAR_WRITE(this_controller, mde->physical_address); + writel(lower_32_bits(mde->physical_address), + &this_controller->smu_registers->remote_node_context_lower); + writel(upper_32_bits(mde->physical_address), + &this_controller->smu_registers->remote_node_context_upper); /* Program the location of the Task Context table into the SCU. */ mde = &this_controller->memory_descriptors[SCU_MDE_TASK_CONTEXT]; this_controller->task_context_table = (struct scu_task_context *) mde->virtual_address; - SMU_HTTBAR_WRITE(this_controller, mde->physical_address); + writel(lower_32_bits(mde->physical_address), + &this_controller->smu_registers->host_task_table_lower); + writel(upper_32_bits(mde->physical_address), + &this_controller->smu_registers->host_task_table_upper); mde = &this_controller->memory_descriptors[SCU_MDE_UF_BUFFER]; scic_sds_unsolicited_frame_control_construct( @@ -378,13 +386,17 @@ static void scic_sds_controller_ram_initialization( /* * Inform the silicon as to the location of the UF headers and - * address table. */ - SCU_UFHBAR_WRITE( - this_controller, - this_controller->uf_control.headers.physical_address); - SCU_PUFATHAR_WRITE( - this_controller, - this_controller->uf_control.address_table.physical_address); + * address table. + */ + writel(lower_32_bits(this_controller->uf_control.headers.physical_address), + &this_controller->scu_registers->sdma.uf_header_base_address_lower); + writel(upper_32_bits(this_controller->uf_control.headers.physical_address), + &this_controller->scu_registers->sdma.uf_header_base_address_upper); + + writel(lower_32_bits(this_controller->uf_control.address_table.physical_address), + &this_controller->scu_registers->sdma.uf_address_table_lower); + writel(upper_32_bits(this_controller->uf_control.address_table.physical_address), + &this_controller->scu_registers->sdma.uf_address_table_upper); } /** @@ -392,25 +404,26 @@ static void scic_sds_controller_ram_initialization( * @this_controller: * */ -static void scic_sds_controller_assign_task_entries( - struct scic_sds_controller *this_controller) +static void +scic_sds_controller_assign_task_entries(struct scic_sds_controller *controller) { u32 task_assignment; /* * Assign all the TCs to function 0 - * TODO: Do we actually need to read this register to write it back? */ - task_assignment = SMU_TCA_READ(this_controller, 0); + * TODO: Do we actually need to read this register to write it back? + */ task_assignment = - ( - task_assignment - | (SMU_TCA_GEN_VAL(STARTING, 0)) - | (SMU_TCA_GEN_VAL(ENDING, this_controller->task_context_entries - 1)) - | (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)) - ); + readl(&controller->smu_registers->task_context_assignment[0]); + + task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | + (SMU_TCA_GEN_VAL(ENDING, controller->task_context_entries - 1)) | + (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); + + writel(task_assignment, + &controller->smu_registers->task_context_assignment[0]); - SMU_TCA_WRITE(this_controller, 0, task_assignment); } /** @@ -433,7 +446,9 @@ static void scic_sds_controller_initialize_completion_queue( | SMU_CQC_EVENT_LIMIT_SET(this_controller->completion_event_entries - 1) ); - SMU_CQC_WRITE(this_controller, completion_queue_control_value); + writel(completion_queue_control_value, + &this_controller->smu_registers->completion_queue_control); + /* Set the completion queue get pointer and enable the queue */ completion_queue_get_value = ( @@ -443,7 +458,8 @@ static void scic_sds_controller_initialize_completion_queue( | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) ); - SMU_CQGR_WRITE(this_controller, completion_queue_get_value); + writel(completion_queue_get_value, + &this_controller->smu_registers->completion_queue_get); /* Set the completion queue put pointer */ completion_queue_put_value = ( @@ -451,7 +467,9 @@ static void scic_sds_controller_initialize_completion_queue( | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) ); - SMU_CQPR_WRITE(this_controller, completion_queue_put_value); + writel(completion_queue_put_value, + &this_controller->smu_registers->completion_queue_put); + /* Initialize the cycle bit of the completion queue entries */ for (index = 0; index < this_controller->completion_queue_entries; index++) { @@ -479,7 +497,8 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue( frame_queue_control_value = SCU_UFQC_GEN_VAL(QUEUE_SIZE, this_controller->uf_control.address_table.count); - SCU_UFQC_WRITE(this_controller, frame_queue_control_value); + writel(frame_queue_control_value, + &this_controller->scu_registers->sdma.unsolicited_frame_queue_control); /* Setup the get pointer for the unsolicited frame queue */ frame_queue_get_value = ( @@ -487,12 +506,12 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue( | SCU_UFQGP_GEN_BIT(ENABLE_BIT) ); - SCU_UFQGP_WRITE(this_controller, frame_queue_get_value); - + writel(frame_queue_get_value, + &this_controller->scu_registers->sdma.unsolicited_frame_get_pointer); /* Setup the put pointer for the unsolicited frame queue */ frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); - - SCU_UFQPP_WRITE(this_controller, frame_queue_put_value); + writel(frame_queue_put_value, + &this_controller->scu_registers->sdma.unsolicited_frame_put_pointer); } /** @@ -505,12 +524,12 @@ static void scic_sds_controller_enable_port_task_scheduler( { u32 port_task_scheduler_value; - port_task_scheduler_value = SCU_PTSGCR_READ(this_controller); - + port_task_scheduler_value = + readl(&this_controller->scu_registers->peg0.ptsg.control); port_task_scheduler_value |= (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); - - SCU_PTSGCR_WRITE(this_controller, port_task_scheduler_value); + writel(port_task_scheduler_value, + &this_controller->scu_registers->peg0.ptsg.control); } /** @@ -531,35 +550,34 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s u32 phy_id; /* Clear DFX Status registers */ - scu_afe_register_write(scic, afe_dfx_master_control0, 0x0081000f); + writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Configure bias currents to normal */ if (is_a0()) - scu_afe_register_write(scic, afe_bias_control, 0x00005500); + writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); else - scu_afe_register_write(scic, afe_bias_control, 0x00005A00); + writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ if (is_b0()) - scu_afe_register_write(scic, afe_pll_control0, 0x80040A08); + writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0); else - scu_afe_register_write(scic, afe_pll_control0, 0x80040908); + writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Wait for the PLL to lock */ do { - afe_status = scu_afe_register_read( - scic, afe_common_block_status); + afe_status = readl(&scic->scu_registers->afe.afe_common_block_status); udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); if (is_b0()) { /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ - scu_afe_register_write(scic, afe_pmsn_master_control0, 0x7bcc96ad); + writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -568,16 +586,16 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s if (is_b0()) { /* Configure transmitter SSC parameters */ - scu_afe_txreg_write(scic, phy_id, afe_tx_ssc_control, 0x00030000); + writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); } else { /* * All defaults, except the Receive Word Alignament/Comma Detect * Enable....(0xe800) */ - scu_afe_txreg_write(scic, phy_id, afe_xcvr_control0, 0x00004512); + writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_xcvr_control1, 0x0050100F); + writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -585,61 +603,65 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ if (is_a0()) - scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003D4); + writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); else if (is_a2()) - scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003F0); + writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); else { /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003d7); + writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); /* * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ - scu_afe_txreg_write(scic, phy_id, afe_channel_control, 0x000003d4); + writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); } udelay(AFE_REGISTER_WRITE_DELAY); if (is_a0() || is_a2()) { /* Enable TX equalization (0xe824) */ - scu_afe_txreg_write(scic, phy_id, afe_tx_control, 0x00040000); + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); udelay(AFE_REGISTER_WRITE_DELAY); } /* * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), * RDD=0x0(RX Detect Enabled) ....(0xe800) */ - scu_afe_txreg_write(scic, phy_id, afe_xcvr_control0, 0x00004100); + writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Leave DFE/FFE on */ if (is_a0()) - scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F09983F); + writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); else if (is_a2()) - scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F11103F); + writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); else { - scu_afe_txreg_write(scic, phy_id, afe_rx_ssc_control0, 0x3F11103F); + writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - scu_afe_txreg_write(scic, phy_id, afe_tx_control, 0x00040000); + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); } udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control0); + writel(oem_phy->afe_tx_amp_control0, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control1); + writel(oem_phy->afe_tx_amp_control1, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control2); + writel(oem_phy->afe_tx_amp_control2, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); udelay(AFE_REGISTER_WRITE_DELAY); - scu_afe_txreg_write(scic, phy_id, afe_tx_amp_control0, oem_phy->afe_tx_amp_control3); + writel(oem_phy->afe_tx_amp_control3, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); udelay(AFE_REGISTER_WRITE_DELAY); } /* Transfer control to the PEs */ - scu_afe_register_write(scic, afe_dfx_master_control0, 0x00010f00); + writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -1437,8 +1459,9 @@ static void scic_sds_controller_process_completions( | event_cycle | SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) | get_cycle | SMU_CQGR_GEN_VAL(POINTER, get_index); - SMU_CQGR_WRITE(this_controller, - this_controller->completion_queue_get); + writel(this_controller->completion_queue_get, + &this_controller->smu_registers->completion_queue_get); + } dev_dbg(scic_to_dev(this_controller), @@ -1456,15 +1479,15 @@ bool scic_sds_controller_isr(struct scic_sds_controller *scic) /* * we have a spurious interrupt it could be that we have already * emptied the completion queue from a previous interrupt */ - SMU_ISR_WRITE(scic, SMU_ISR_COMPLETION); + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); /* * There is a race in the hardware that could cause us not to be notified * of an interrupt completion if we do not take this step. We will mask * then unmask the interrupts so if there is another interrupt pending * the clearing of the interrupt source we get the next interrupt message. */ - SMU_IMR_WRITE(scic, 0xFF000000); - SMU_IMR_WRITE(scic, 0x00000000); + writel(0xFF000000, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); } return false; @@ -1477,18 +1500,18 @@ void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) scic_sds_controller_process_completions(scic); /* Clear the interrupt and enable all interrupts again */ - SMU_ISR_WRITE(scic, SMU_ISR_COMPLETION); + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); /* Could we write the value of SMU_ISR_COMPLETION? */ - SMU_IMR_WRITE(scic, 0xFF000000); - SMU_IMR_WRITE(scic, 0x00000000); + writel(0xFF000000, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); } bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) { u32 interrupt_status; - interrupt_status = SMU_ISR_READ(scic); - + interrupt_status = + readl(&scic->smu_registers->interrupt_status); interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); if (interrupt_status != 0) { @@ -1504,8 +1527,8 @@ bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) * then unmask the error interrupts so if there was another interrupt * pending we will be notified. * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ - SMU_IMR_WRITE(scic, 0x000000FF); - SMU_IMR_WRITE(scic, 0x00000000); + writel(0xff, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); return false; } @@ -1514,14 +1537,14 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) { u32 interrupt_status; - interrupt_status = SMU_ISR_READ(scic); + interrupt_status = + readl(&scic->smu_registers->interrupt_status); if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && scic_sds_controller_completion_queue_has_entries(scic)) { scic_sds_controller_process_completions(scic); - SMU_ISR_WRITE(scic, SMU_ISR_QUEUE_SUSPEND); - + writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status); } else { dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, interrupt_status); @@ -1535,7 +1558,7 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) /* If we dont process any completions I am not sure that we want to do this. * We are in the middle of a hardware fault and should probably be reset. */ - SMU_IMR_WRITE(scic, 0x00000000); + writel(0, &scic->smu_registers->interrupt_mask); } @@ -1648,7 +1671,7 @@ void scic_sds_controller_post_request( this_controller, request); - SMU_PCP_WRITE(this_controller, request); + writel(request, &this_controller->smu_registers->post_context_port); } /** @@ -1871,7 +1894,8 @@ void scic_sds_controller_release_frame( { if (scic_sds_unsolicited_frame_control_release_frame( &this_controller->uf_control, frame_index) == true) - SCU_UFQGP_WRITE(this_controller, this_controller->uf_control.get); + writel(this_controller->uf_control.get, + &this_controller->scu_registers->sdma.unsolicited_frame_get_pointer); } /** @@ -2478,14 +2502,14 @@ void scic_controller_enable_interrupts( struct scic_sds_controller *scic) { BUG_ON(scic->smu_registers == NULL); - SMU_IMR_WRITE(scic, 0x00000000); + writel(0, &scic->smu_registers->interrupt_mask); } void scic_controller_disable_interrupts( struct scic_sds_controller *scic) { BUG_ON(scic->smu_registers == NULL); - SMU_IMR_WRITE(scic, 0xffffffff); + writel(0xffffffff, &scic->smu_registers->interrupt_mask); } static enum sci_status scic_controller_set_mode( @@ -2543,16 +2567,16 @@ static void scic_sds_controller_reset_hardware( scic_controller_disable_interrupts(scic); /* Reset the SCU */ - SMU_SMUSRCR_WRITE(scic, 0xFFFFFFFF); + writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control); /* Delay for 1ms to before clearing the CQP and UFQPR. */ udelay(1000); /* The write to the CQGR clears the CQP */ - SMU_CQGR_WRITE(scic, 0x00000000); + writel(0x00000000, &scic->smu_registers->completion_queue_get); /* The write to the UFQGP clears the UFQPR */ - SCU_UFQGP_WRITE(scic, 0x00000000); + writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer); } enum sci_status scic_user_parameters_set( @@ -2778,11 +2802,10 @@ static enum sci_status scic_controller_set_interrupt_coalescence( return SCI_FAILURE_INVALID_PARAMETER_VALUE; } - SMU_ICC_WRITE( - scic_controller, - (SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | - SMU_ICC_GEN_VAL(TIMER, timeout_encode)) - ); + writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | + SMU_ICC_GEN_VAL(TIMER, timeout_encode), + &scic_controller->smu_registers->interrupt_coalesce_control); + scic_controller->interrupt_coalesce_number = (u16)coalesce_number; scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100; @@ -2868,7 +2891,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct u32 terminate_loop; /* Take the hardware out of reset */ - SMU_SMUSRCR_WRITE(scic, 0x00000000); + writel(0, &scic->smu_registers->soft_reset_control); /* * / @todo Provide meaningfull error code for hardware failure @@ -2879,7 +2902,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct while (terminate_loop-- && (result != SCI_SUCCESS)) { /* Loop until the hardware reports success */ udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); - status = SMU_SMUCSR_READ(scic); + status = readl(&scic->smu_registers->control_status); if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) @@ -2896,7 +2919,9 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct /* * Determine what are the actaul device capacities that the * hardware will support */ - device_context_capacity = SMU_DCC_READ(scic); + device_context_capacity = + readl(&scic->smu_registers->device_context_capacity); + max_supported_ports = smu_dcc_get_max_ports(device_context_capacity); max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity); @@ -2910,9 +2935,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct struct scu_port_task_scheduler_group_registers *ptsg = &scic->scu_registers->peg0.ptsg; - scu_register_write(scic, - ptsg->protocol_engine[index], - index); + writel(index, &ptsg->protocol_engine[index]); } /* Record the smaller of the two capacity values */ @@ -2939,16 +2962,20 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct u32 dma_configuration; /* Configure the payload DMA */ - dma_configuration = SCU_PDMACR_READ(scic); + dma_configuration = + readl(&scic->scu_registers->sdma.pdma_configuration); dma_configuration |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - SCU_PDMACR_WRITE(scic, dma_configuration); + writel(dma_configuration, + &scic->scu_registers->sdma.pdma_configuration); /* Configure the control DMA */ - dma_configuration = SCU_CDMACR_READ(scic); + dma_configuration = + readl(&scic->scu_registers->sdma.cdma_configuration); dma_configuration |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - SCU_CDMACR_WRITE(scic, dma_configuration); + writel(dma_configuration, + &scic->scu_registers->sdma.cdma_configuration); } /* diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index fd78148..baf0b9e 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -57,6 +57,7 @@ #define _SCIC_SDS_CONTROLLER_H_ #include +#include /** * This file contains the structures, constants and prototypes used for the @@ -80,7 +81,6 @@ #include "scu_unsolicited_frame.h" #include "scic_sds_unsolicited_frame_control.h" #include "scic_sds_port_configuration_agent.h" -#include "scic_sds_pci.h" struct scic_sds_remote_device; struct scic_sds_request; @@ -428,38 +428,6 @@ extern const struct scic_sds_controller_state_handler (&(controller)->port_agent) /** - * smu_register_write() - - * - * This macro writes to the smu_register for this controller - */ -#define smu_register_write(controller, reg, value) \ - scic_sds_pci_write_smu_dword((controller), &(reg), (value)) - -/** - * smu_register_read() - - * - * This macro reads the smu_register for this controller - */ -#define smu_register_read(controller, reg) \ - scic_sds_pci_read_smu_dword((controller), &(reg)) - -/** - * scu_register_write() - - * - * This mcaro writes the scu_register for this controller - */ -#define scu_register_write(controller, reg, value) \ - scic_sds_pci_write_scu_dword((controller), &(reg), (value)) - -/** - * scu_register_read() - - * - * This macro reads the scu_register for this controller - */ -#define scu_register_read(controller, reg) \ - scic_sds_pci_read_scu_dword((controller), &(reg)) - -/** * scic_sds_controller_get_protocol_engine_group() - * * This macro returns the protocol engine group for this controller object. diff --git a/drivers/scsi/isci/core/scic_sds_controller_registers.h b/drivers/scsi/isci/core/scic_sds_controller_registers.h deleted file mode 100644 index b7bec92..0000000 --- a/drivers/scsi/isci/core/scic_sds_controller_registers.h +++ /dev/null @@ -1,463 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_CONTROLLER_REGISTERS_H_ -#define _SCIC_SDS_CONTROLLER_REGISTERS_H_ - -/** - * This file contains macros used to perform the register reads/writes to the - * SCU hardware. - * - * - */ - -#include "scu_registers.h" -#include "scic_sds_controller.h" - -/** - * scic_sds_controller_smu_register_read() - - * - * SMU_REGISTER_ACCESS_MACROS - */ -#define scic_sds_controller_smu_register_read(controller, reg) \ - smu_register_read(\ - (controller), \ - (controller)->smu_registers->reg \ - ) - -#define scic_sds_controller_smu_register_write(controller, reg, value) \ - smu_register_write(\ - (controller), \ - (controller)->smu_registers->reg, \ - (value) \ - ) - -/** - * scu_afe_register_write() - - * - * AFE_REGISTER_ACCESS_MACROS - */ -#define scu_afe_register_write(controller, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->afe.reg, \ - (value) \ - ) - -#define scu_afe_txreg_write(controller, phy, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->afe.scu_afe_xcvr[phy].reg,\ - (value) \ - ) - -#define scu_afe_register_read(controller, reg) \ - scu_register_read(\ - (controller), \ - (controller)->scu_registers->afe.reg \ - ) - -/** - * scu_controller_viit_register_write() - - * - * VIIT_REGISTER_ACCESS_MACROS - */ -#define scu_controller_viit_register_write(controller, index, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->peg0.viit[index].reg, \ - value \ - ) - -/* - * ***************************************************************************** - * * SMU REGISTERS - * ***************************************************************************** */ - -/** - * SMU_PCP_WRITE() - - * - * struct smu_registers - */ -#define SMU_PCP_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, post_context_port, value \ - ) - -#define SMU_TCR_READ(controller, value) \ - scic_sds_controller_smu_register_read(\ - controller, task_context_range \ - ) - -#define SMU_TCR_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, task_context_range, value \ - ) - -#define SMU_HTTBAR_WRITE(controller, address) \ - { \ - scic_sds_controller_smu_register_write(\ - controller, \ - host_task_table_lower, \ - lower_32_bits(address) \ - ); \ - scic_sds_controller_smu_register_write(\ - controller, \ - host_task_table_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SMU_CQBAR_WRITE(controller, address) \ - { \ - scic_sds_controller_smu_register_write(\ - controller, \ - completion_queue_lower, \ - lower_32_bits(address) \ - ); \ - scic_sds_controller_smu_register_write(\ - controller, \ - completion_queue_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SMU_CQGR_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, completion_queue_get, value \ - ) - -#define SMU_CQGR_READ(controller, value) \ - scic_sds_controller_smu_register_read(\ - controller, completion_queue_get \ - ) - -#define SMU_CQPR_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, completion_queue_put, value \ - ) - -#define SMU_RNCBAR_WRITE(controller, address) \ - { \ - scic_sds_controller_smu_register_write(\ - controller, \ - remote_node_context_lower, \ - lower_32_bits(address) \ - ); \ - scic_sds_controller_smu_register_write(\ - controller, \ - remote_node_context_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SMU_AMR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, address_modifier \ - ) - -#define SMU_IMR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, interrupt_mask \ - ) - -#define SMU_IMR_WRITE(controller, mask) \ - scic_sds_controller_smu_register_write(\ - controller, interrupt_mask, mask \ - ) - -#define SMU_ISR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, interrupt_status \ - ) - -#define SMU_ISR_WRITE(controller, status) \ - scic_sds_controller_smu_register_write(\ - controller, interrupt_status, status \ - ) - -#define SMU_ICC_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, interrupt_coalesce_control \ - ) - -#define SMU_ICC_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, interrupt_coalesce_control, value \ - ) - -#define SMU_CQC_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, completion_queue_control, value \ - ) - -#define SMU_SMUSRCR_WRITE(controller, value) \ - scic_sds_controller_smu_register_write(\ - controller, soft_reset_control, value \ - ) - -#define SMU_TCA_WRITE(controller, index, value) \ - scic_sds_controller_smu_register_write(\ - controller, task_context_assignment[index], value \ - ) - -#define SMU_TCA_READ(controller, index) \ - scic_sds_controller_smu_register_read(\ - controller, task_context_assignment[index] \ - ) - -#define SMU_DCC_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, device_context_capacity \ - ) - -#define SMU_DFC_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, device_function_capacity \ - ) - -#define SMU_SMUCSR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, control_status \ - ) - -#define SMU_CQPR_READ(controller) \ - scic_sds_controller_smu_register_read(\ - controller, completion_queue_put \ - ) - - -/** - * scic_sds_controller_scu_register_read() - - * - * SCU_REGISTER_ACCESS_MACROS - */ -#define scic_sds_controller_scu_register_read(controller, reg) \ - scu_register_read(\ - (controller), \ - (controller)->scu_registers->reg \ - ) - -#define scic_sds_controller_scu_register_write(controller, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->reg, \ - (value) \ - ) - - -/* - * **************************************************************************** - * * SCU SDMA REGISTERS - * **************************************************************************** */ - -/** - * scu_sdma_register_read() - - * - * SCU_SDMA_REGISTER_ACCESS_MACROS - */ -#define scu_sdma_register_read(controller, reg) \ - scu_register_read(\ - (controller), \ - (controller)->scu_registers->sdma.reg \ - ) - -#define scu_sdma_register_write(controller, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->sdma.reg, \ - (value) \ - ) - -/** - * SCU_PUFATHAR_WRITE() - - * - * struct scu_sdma_registers - */ -#define SCU_PUFATHAR_WRITE(controller, address) \ - { \ - scu_sdma_register_write(\ - controller, \ - uf_address_table_lower, \ - lower_32_bits(address) \ - ); \ - scu_sdma_register_write(\ - controller, \ - uf_address_table_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SCU_UFHBAR_WRITE(controller, address) \ - { \ - scu_sdma_register_write(\ - controller, \ - uf_header_base_address_lower, \ - lower_32_bits(address) \ - ); \ - scu_sdma_register_write(\ - controller, \ - uf_header_base_address_upper, \ - upper_32_bits(address) \ - ); \ - } - -#define SCU_UFQC_READ(controller) \ - scu_sdma_register_read(\ - controller, \ - unsolicited_frame_queue_control \ - ) - -#define SCU_UFQC_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - unsolicited_frame_queue_control, \ - value \ - ) - -#define SCU_UFQPP_READ(controller) \ - scu_sdma_register_read(\ - controller, \ - unsolicited_frame_put_pointer \ - ) - -#define SCU_UFQPP_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - unsolicited_frame_put_pointer, \ - value \ - ) - -#define SCU_UFQGP_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - unsolicited_frame_get_pointer, \ - value \ - ) - -#define SCU_PDMACR_READ(controller) \ - scu_sdma_register_read(\ - controller, \ - pdma_configuration \ - ) - -#define SCU_PDMACR_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - pdma_configuration, \ - value \ - ) - -#define SCU_CDMACR_READ(controller) \ - scu_sdma_register_read(\ - controller, \ - cdma_configuration \ - ) - -#define SCU_CDMACR_WRITE(controller, value) \ - scu_sdma_register_write(\ - controller, \ - cdma_configuration, \ - value \ - ) - -/* - * ***************************************************************************** - * * SCU Port Task Scheduler Group Registers - * ***************************************************************************** */ - -/** - * scu_ptsg_register_read() - - * - * SCU_PTSG_REGISTER_ACCESS_MACROS - */ -#define scu_ptsg_register_read(controller, reg) \ - scu_register_read(\ - (controller), \ - (controller)->scu_registers->peg0.ptsg.reg \ - ) - -#define scu_ptsg_register_write(controller, reg, value) \ - scu_register_write(\ - (controller), \ - (controller)->scu_registers->peg0.ptsg.reg, \ - (value) \ - ) - -/** - * SCU_PTSGCR_READ() - - * - * SCU_PTSG_REGISTERS - */ -#define SCU_PTSGCR_READ(controller) \ - scu_ptsg_register_read(\ - (controller), \ - control \ - ) - -#define SCU_PTSGCR_WRITE(controller, value) \ - scu_ptsg_register_write(\ - (controller), \ - control, \ - value \ - ) - -#define SCU_PTSGRTC_READ(controller) \ - scu_ptsg_register_read(\ - contoller, \ - real_time_clock \ - ) - -#endif /* _SCIC_SDS_CONTROLLER_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_pci.h b/drivers/scsi/isci/core/scic_sds_pci.h deleted file mode 100644 index bf0cbca..0000000 --- a/drivers/scsi/isci/core/scic_sds_pci.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PCI_H_ -#define _SCIC_SDS_PCI_H_ - -/** - * This file contains the prototypes/macros utilized in writing out PCI data - * for the SCI core. - * - * - */ - -#include - -struct scic_sds_controller; - -void scic_sds_pci_bar_initialization(struct scic_sds_controller *scic); - -/* for debug we separate scu and smu accesses and require a controller */ -static inline u32 scic_sds_pci_read_smu_dword(struct scic_sds_controller *scic, void __iomem *addr) -{ - return readl(addr); -} - -static inline void scic_sds_pci_write_smu_dword(struct scic_sds_controller *scic, void __iomem *addr, u32 value) -{ - writel(value, addr); -} - -static inline u32 scic_sds_pci_read_scu_dword(struct scic_sds_controller *scic, void __iomem *addr) -{ - return readl(addr); -} - -static inline void scic_sds_pci_write_scu_dword(struct scic_sds_controller *scic, void __iomem *addr, u32 value) -{ - writel(value, addr); -} - - -#endif /* _SCIC_SDS_PCI_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 532338e..c26e5df 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -60,7 +60,6 @@ #include "scic_phy.h" #include "scic_sds_controller.h" #include "scic_sds_phy.h" -#include "scic_sds_phy_registers.h" #include "scic_sds_port.h" #include "scic_sds_remote_node_context.h" #include "sci_environment.h" @@ -98,12 +97,13 @@ static enum sci_status scic_sds_phy_transport_layer_initialization( this_phy->transport_layer_registers = transport_layer_registers; - SCU_STPTLDARNI_WRITE(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); + writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, + &this_phy->transport_layer_registers->stp_rni); /* Hardware team recommends that we enable the STP prefetch for all transports */ - tl_control = SCU_TLCR_READ(this_phy); + tl_control = readl(&this_phy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); - SCU_TLCR_WRITE(this_phy, tl_control); + writel(tl_control, &this_phy->transport_layer_registers->control); return SCI_SUCCESS; } @@ -135,30 +135,36 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 - SCU_SAS_TIID_WRITE(sci_phy, (SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | - SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE))); + writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | + SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), + &sci_phy->link_layer_registers->transmit_identification); /* Write the device SAS Address */ - SCU_SAS_TIDNH_WRITE(sci_phy, 0xFEDCBA98); - SCU_SAS_TIDNL_WRITE(sci_phy, phy_idx); + writel(0xFEDCBA98, &sci_phy->link_layer_registers->sas_device_name_high); + writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); /* Write the source SAS Address */ - SCU_SAS_TISSAH_WRITE(sci_phy, phy_oem->sas_address.high); - SCU_SAS_TISSAL_WRITE(sci_phy, phy_oem->sas_address.low); + writel(phy_oem->sas_address.high, + &sci_phy->link_layer_registers->source_sas_address_high); + writel(phy_oem->sas_address.low, + &sci_phy->link_layer_registers->source_sas_address_low); /* Clear and Set the PHY Identifier */ - SCU_SAS_TIPID_WRITE(sci_phy, 0x00000000); - SCU_SAS_TIPID_WRITE(sci_phy, SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx)); + writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), + &sci_phy->link_layer_registers->identify_frame_phy_id); /* Change the initial state of the phy configuration register */ - phy_configuration = SCU_SAS_PCFG_READ(sci_phy); + phy_configuration = + readl(&sci_phy->link_layer_registers->phy_configuration); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(sci_phy, phy_configuration); + writel(phy_configuration, + &sci_phy->link_layer_registers->phy_configuration); /* Configure the SNW capabilities */ phy_capabilities.u.all = 0; @@ -188,13 +194,15 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, if ((parity_count % 2) != 0) phy_capabilities.u.bits.parity = 1; - SCU_SAS_PHYCAP_WRITE(sci_phy, phy_capabilities.u.all); + writel(phy_capabilities.u.all, + &sci_phy->link_layer_registers->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup */ - SCU_SAS_ENSPINUP_WRITE(sci_phy, SCU_ENSPINUP_GEN_VAL(COUNT, - phy_user->notify_enable_spin_up_insertion_frequency)); + writel(SCU_ENSPINUP_GEN_VAL(COUNT, + phy_user->notify_enable_spin_up_insertion_frequency), + &sci_phy->link_layer_registers->notify_enable_spinup_control); /* Write the ALIGN Insertion Ferequency for connected phy and * inpendent of connected state @@ -205,10 +213,11 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, phy_user->align_insertion_frequency); - SCU_SAS_CLKSM_WRITE(sci_phy, clksm_value); + writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management); /* @todo Provide a way to write this register correctly */ - scu_link_layer_register_write(sci_phy, afe_lookup_table_control, 0x02108421); + writel(0x02108421, + &sci_phy->link_layer_registers->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, (u8)scic->user_parameters.sds1.no_outbound_task_timeout); @@ -225,8 +234,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, break; } llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); - - scu_link_layer_register_write(sci_phy, link_layer_control, llctl); + writel(llctl, &sci_phy->link_layer_registers->link_layer_control); if (is_a0() || is_a2()) { /* Program the max ARB time for the PHY to 700us so we inter-operate with @@ -234,16 +242,15 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, * many breaks. This time value will guarantee that the initiator PHY will * generate the break. */ - scu_link_layer_register_write(sci_phy, - maximum_arbitration_wait_timer_timeout, - SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME); + writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, + &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); } /* * Set the link layer hang detection to 500ms (0x1F4) from its default - * value of 128ms. Max value is 511 ms. */ - scu_link_layer_register_write(sci_phy, link_layer_hang_detection_timeout, - 0x1F4); + * value of 128ms. Max value is 511 ms. + */ + writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ sci_base_state_machine_change_state(&sci_phy->parent.state_machine, @@ -367,15 +374,15 @@ void scic_sds_phy_setup_transport( { u32 tl_control; - SCU_STPTLDARNI_WRITE(this_phy, device_id); + writel(device_id, &this_phy->transport_layer_registers->stp_rni); /* * The read should guarantee that the first write gets posted * before the next write */ - tl_control = SCU_TLCR_READ(this_phy); + tl_control = readl(&this_phy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); - SCU_TLCR_WRITE(this_phy, tl_control); + writel(tl_control, &this_phy->transport_layer_registers->control); } /** @@ -390,9 +397,12 @@ static void scic_sds_phy_suspend( { u32 scu_sas_pcfg_value; - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value = + readl(&this_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &this_phy->link_layer_registers->phy_configuration); + scic_sds_phy_setup_transport(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } @@ -408,11 +418,11 @@ void scic_sds_phy_resume( { u32 scu_sas_pcfg_value; - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); - + scu_sas_pcfg_value = + readl(&this_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &this_phy->link_layer_registers->phy_configuration); } /** @@ -427,8 +437,8 @@ void scic_sds_phy_get_sas_address( struct scic_sds_phy *this_phy, struct sci_sas_address *sas_address) { - sas_address->high = SCU_SAS_TISSAH_READ(this_phy); - sas_address->low = SCU_SAS_TISSAL_READ(this_phy); + sas_address->high = readl(&this_phy->link_layer_registers->source_sas_address_high); + sas_address->low = readl(&this_phy->link_layer_registers->source_sas_address_low); } /** @@ -460,7 +470,10 @@ void scic_sds_phy_get_protocols( struct scic_sds_phy *this_phy, struct sci_sas_identify_address_frame_protocols *protocols) { - protocols->u.all = (u16)(SCU_SAS_TIID_READ(this_phy) & 0x0000FFFF); + protocols->u.all = + (u16)(readl(&this_phy-> + link_layer_registers->transmit_identification) & + 0x0000FFFF); } /** @@ -589,8 +602,8 @@ enum sci_status scic_sas_phy_get_properties( sizeof(struct sci_sas_identify_address_frame) ); - properties->received_capabilities.u.all - = SCU_SAS_RECPHYCAP_READ(sci_phy); + properties->received_capabilities.u.all = + readl(&sci_phy->link_layer_registers->receive_phycap); return SCI_SUCCESS; } @@ -639,9 +652,11 @@ static void scic_sds_phy_start_sas_link_training( { u32 phy_control; - phy_control = SCU_SAS_PCFG_READ(this_phy); + phy_control = + readl(&this_phy->link_layer_registers->phy_configuration); phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); - SCU_SAS_PCFG_WRITE(this_phy, phy_control); + writel(phy_control, + &this_phy->link_layer_registers->phy_configuration); sci_base_state_machine_change_state( &this_phy->starting_substate_machine, @@ -1331,9 +1346,9 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_po { u32 enable_spinup; - enable_spinup = SCU_SAS_ENSPINUP_READ(sci_phy); + enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); - SCU_SAS_ENSPINUP_WRITE(sci_phy, enable_spinup); + writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); /* Change state to the final state this substate machine has run to completion */ sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, @@ -1357,16 +1372,19 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_p u32 scu_sas_pcfg_value; /* Release the spinup hold state and reset the OOB state machine */ - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(sci_phy); + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(sci_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); /* Now restart the OOB operation */ scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - SCU_SAS_PCFG_WRITE(sci_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); /* Change state to the final state this substate machine has run to completion */ sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, @@ -2120,18 +2138,20 @@ static void scu_link_layer_stop_protocol_engine( u32 enable_spinup_value; /* Suspend the protocol engine and place it in a sata spinup hold state */ - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value = + readl(&this_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= ( SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) ); - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &this_phy->link_layer_registers->phy_configuration); /* Disable the notify enable spinup primitives */ - enable_spinup_value = SCU_SAS_ENSPINUP_READ(this_phy); + enable_spinup_value = readl(&this_phy->link_layer_registers->notify_enable_spinup_control); enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); - SCU_SAS_ENSPINUP_WRITE(this_phy, enable_spinup_value); + writel(enable_spinup_value, &this_phy->link_layer_registers->notify_enable_spinup_control); } /** @@ -2144,12 +2164,13 @@ static void scu_link_layer_start_oob( { u32 scu_sas_pcfg_value; - scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy); + scu_sas_pcfg_value = + readl(&this_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); - - SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value); + writel(scu_sas_pcfg_value, + &this_phy->link_layer_registers->phy_configuration); } /** @@ -2168,15 +2189,18 @@ static void scu_link_layer_tx_hard_reset( /* * SAS Phys must wait for the HARD_RESET_TX event notification to transition * to the starting state. */ - phy_configuration_value = SCU_SAS_PCFG_READ(this_phy); + phy_configuration_value = + readl(&this_phy->link_layer_registers->phy_configuration); phy_configuration_value |= (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); - SCU_SAS_PCFG_WRITE(this_phy, phy_configuration_value); + writel(phy_configuration_value, + &this_phy->link_layer_registers->phy_configuration); /* Now take the OOB state machine out of reset */ phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - SCU_SAS_PCFG_WRITE(this_phy, phy_configuration_value); + writel(phy_configuration_value, + &this_phy->link_layer_registers->phy_configuration); } /* diff --git a/drivers/scsi/isci/core/scic_sds_phy_registers.h b/drivers/scsi/isci/core/scic_sds_phy_registers.h deleted file mode 100644 index ddbb236..0000000 --- a/drivers/scsi/isci/core/scic_sds_phy_registers.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PHY_REGISTERS_H_ -#define _SCIC_SDS_PHY_REGISTERS_H_ - -/** - * This file contains the macros used by the phy object to read/write to the - * SCU link layer registers. - * - * - */ - -#include "scic_sds_controller.h" - -/* ************************************************************************** - * * SCU TRANSPORT LAYER REGISTER OPERATIONS - * ************************************************************************** */ - -/** - * Macro to read the transport layer register associated with this phy - * object. - */ -#define scu_transport_layer_read(phy, reg) \ - scu_register_read( \ - scic_sds_phy_get_controller(phy), \ - (phy)->transport_layer_registers->reg \ - ) - -/** - * Macro to write the transport layer register associated with this phy - * object. - */ -#define scu_transport_layer_write(phy, reg, value) \ - scu_register_write( \ - scic_sds_phy_get_controller(phy), \ - (phy)->transport_layer_registers->reg, \ - (value) \ - ) - -/* ************************************************************************** - * * Transport Layer registers controlled by the phy object - * ************************************************************************** */ - -/* This macro reads the Transport layer control register */ -#define SCU_TLCR_READ(phy) \ - scu_transport_layer_read(phy, control) - -/* This macro writes the Transport layer control register */ -#define SCU_TLCR_WRITE(phy, value) \ - scu_transport_layer_write(phy, control, value) - -/* This macro reads the Transport layer address translation register */ -#define SCU_TLADTR_READ(phy) \ - scu_transport_layer_read(phy, address_translation) - -/* This macro writes the Transport layer address translation register */ -#define SCU_TLADTR_WRITE(phy) \ - scu_transport_layer_write(phy, address_translation, value) - -/* This macro writes the STP Transport Layer Direct Attached RNi register */ -#define SCU_STPTLDARNI_WRITE(phy, index) \ - scu_transport_layer_write(phy, stp_rni, index) - -/* This macro reads the STP Transport Layer Direct Attached RNi register */ -#define SCU_STPTLDARNI_READ(phy) \ - scu_transport_layer_read(phy, stp_rni) - -/* - * ***************************************************************************** - * * SCU LINK LAYER REGISTER OPERATIONS - * ***************************************************************************** */ - -/** - * scu_link_layer_register_read() - - * - * THis macro requests the SCU register write for the specified link layer - * register. - */ -#define scu_link_layer_register_read(phy, reg) \ - scu_register_read(\ - scic_sds_phy_get_controller(phy), \ - (phy)->link_layer_registers->reg \ - ) - -/** - * scu_link_layer_register_write() - - * - * This macro requests the SCU register read for the specified link layer - * register. - */ -#define scu_link_layer_register_write(phy, reg, value) \ - scu_register_write(\ - scic_sds_phy_get_controller(phy), \ - (phy)->link_layer_registers->reg, \ - (value) \ - ) - -/* - * ***************************************************************************** - * * SCU LINK LAYER REGISTERS - * ***************************************************************************** */ - -/* / This macro reads from the SAS Identify Frame PHY Identifier register */ -#define SCU_SAS_TIPID_READ(phy) \ - scu_link_layer_register_read(phy, identify_frame_phy_id) - -/* / This macro writes to the SAS Identify Frame PHY Identifier register */ -#define SCU_SAS_TIPID_WRITE(phy, value) \ - scu_link_layer_register_write(phy, identify_frame_phy_id, value) - -/* / This macro reads from the SAS Identification register */ -#define SCU_SAS_TIID_READ(phy) \ - scu_link_layer_register_read(phy, transmit_identification) - -/* / This macro writes to the SAS Identification register */ -#define SCU_SAS_TIID_WRITE(phy, value) \ - scu_link_layer_register_write(phy, transmit_identification, value) - -/* / This macro reads the SAS Device Name High register */ -#define SCU_SAS_TIDNH_READ(phy) \ - scu_link_layer_register_read(phy, sas_device_name_high) - -/* / This macro writes the SAS Device Name High register */ -#define SCU_SAS_TIDNH_WRITE(phy, value) \ - scu_link_layer_register_write(phy, sas_device_name_high, value) - -/* / This macro reads the SAS Device Name Low register */ -#define SCU_SAS_TIDNL_READ(phy) \ - scu_link_layer_register_read(phy, sas_device_name_low) - -/* / This macro writes the SAS Device Name Low register */ -#define SCU_SAS_TIDNL_WRITE(phy, value) \ - scu_link_layer_register_write(phy, sas_device_name_low, value) - -/* / This macro reads the Source SAS Address High register */ -#define SCU_SAS_TISSAH_READ(phy) \ - scu_link_layer_register_read(phy, source_sas_address_high) - -/* / This macro writes the Source SAS Address High register */ -#define SCU_SAS_TISSAH_WRITE(phy, value) \ - scu_link_layer_register_write(phy, source_sas_address_high, value) - -/* / This macro reads the Source SAS Address Low register */ -#define SCU_SAS_TISSAL_READ(phy) \ - scu_link_layer_register_read(phy, source_sas_address_low) - -/* / This macro writes the Source SAS Address Low register */ -#define SCU_SAS_TISSAL_WRITE(phy, value) \ - scu_link_layer_register_write(phy, source_sas_address_low, value) - -/* / This macro reads the PHY Configuration register */ -#define SCU_SAS_PCFG_READ(phy) \ - scu_link_layer_register_read(phy, phy_configuration); - -/* / This macro writes the PHY Configuration register */ -#define SCU_SAS_PCFG_WRITE(phy, value) \ - scu_link_layer_register_write(phy, phy_configuration, value) - -/* / This macro reads the PHY Enable Spinup register */ -#define SCU_SAS_ENSPINUP_READ(phy) \ - scu_link_layer_register_read(phy, notify_enable_spinup_control) - -/* / This macro writes the PHY Enable Spinup register */ -#define SCU_SAS_ENSPINUP_WRITE(phy, value) \ - scu_link_layer_register_write(phy, notify_enable_spinup_control, value) - -/* This macro reads the CLKSM register */ -#define SCU_SAS_CLKSM_READ(phy) \ - scu_link_layer_register_read(phy, clock_skew_management) - -/* This macro writes the CLKSM register */ -#define SCU_SAS_CLKSM_WRITE(phy, value) \ - scu_link_layer_register_write(phy, clock_skew_management, value) - -/* / This macro reads the PHY Capacity register */ -#define SCU_SAS_PHYCAP_READ(phy) \ - scu_link_layer_register_read(phy, phy_capabilities) - -/* / This macro writes the PHY Capacity register */ -#define SCU_SAS_PHYCAP_WRITE(phy, value) \ - scu_link_layer_register_write(phy, phy_capabilities, value) - -/* / This macro reads the Recieved PHY Capacity register */ -#define SCU_SAS_RECPHYCAP_READ(phy) \ - scu_link_layer_register_read(phy, receive_phycap) - -/* / This macro reads the link layer control register */ -#define SCU_SAS_LLCTL_READ(phy) \ - scu_link_layer_register_read(phy, link_layer_control); - -/* / This macro writes the link layer control register */ -#define SCU_SAS_LLCTL_WRITE(phy, value) \ - scu_link_layer_register_write(phy, link_layer_control, value); - -#endif /* _SCIC_SDS_PHY_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 88b892d..8e3983e 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -60,14 +60,12 @@ #include "scic_port.h" #include "scic_sds_controller.h" #include "scic_sds_phy.h" -#include "scic_sds_phy_registers.h" #include "scic_sds_port.h" -#include "scic_sds_port_registers.h" #include "scic_sds_remote_device.h" #include "scic_sds_remote_node_context.h" #include "scic_sds_request.h" #include "sci_environment.h" -#include "scic_sds_controller_registers.h" +#include "scu_registers.h" #define SCIC_SDS_PORT_MIN_TIMER_COUNT (SCI_MAX_PORTS) #define SCIC_SDS_PORT_MAX_TIMER_COUNT (SCI_MAX_PORTS) @@ -706,7 +704,8 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, sci_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; /* Re-assign the phy back to the LP as if it were a narrow port */ - SCU_PCSPExCR_WRITE(sci_port, sci_phy->phy_index, sci_phy->phy_index); + writel(sci_phy->phy_index, + &sci_port->port_pe_configuration_register[sci_phy->phy_index]); if (do_notify_user == true) isci_port_link_down(ihost, iphy, iport); @@ -969,25 +968,20 @@ static void scic_sds_port_update_viit_entry(struct scic_sds_port *this_port) scic_sds_port_get_sas_address(this_port, &sas_address); - scu_port_viit_register_write( - this_port, initiator_sas_address_hi, sas_address.high); - - scu_port_viit_register_write( - this_port, initiator_sas_address_lo, sas_address.low); + writel(sas_address.high, + &this_port->viit_registers->initiator_sas_address_hi); + writel(sas_address.low, + &this_port->viit_registers->initiator_sas_address_lo); /* This value get cleared just in case its not already cleared */ - scu_port_viit_register_write( - this_port, reserved, 0); + writel(0, &this_port->viit_registers->reserved); /* We are required to update the status register last */ - scu_port_viit_register_write( - this_port, status, ( - SCU_VIIT_ENTRY_ID_VIIT - | SCU_VIIT_IPPT_INITIATOR - | ((1 << this_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) - | SCU_VIIT_STATUS_ALL_VALID - ) - ); + writel(SCU_VIIT_ENTRY_ID_VIIT | + SCU_VIIT_IPPT_INITIATOR | + ((1 << this_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | + SCU_VIIT_STATUS_ALL_VALID, + &this_port->viit_registers->status); } /** @@ -1059,10 +1053,12 @@ void scic_port_enable_broadcast_change_notification( for (index = 0; index < SCI_MAX_PHYS; index++) { phy = port->phy_table[index]; if (phy != NULL) { - register_value = SCU_SAS_LLCTL_READ(phy); + register_value = + readl(&phy->link_layer_registers->link_layer_control); /* clear the bit by writing 1. */ - SCU_SAS_LLCTL_WRITE(phy, register_value); + writel(register_value, + &phy->link_layer_registers->link_layer_control); } } } @@ -1618,16 +1614,14 @@ scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = * * This method will susped the port task scheduler for this port object. none */ -static void scic_sds_port_suspend_port_task_scheduler( - struct scic_sds_port *this_port) +static void +scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; - pts_control_value = scu_port_task_scheduler_read(this_port, control); - + pts_control_value = readl(&port->port_task_scheduler_registers->control); pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); - - scu_port_task_scheduler_write(this_port, control, pts_control_value); + writel(pts_control_value, &port->port_task_scheduler_registers->control); } /** @@ -1688,16 +1682,14 @@ static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) * * This method will resume the port task scheduler for this port object. none */ -static void scic_sds_port_resume_port_task_scheduler( - struct scic_sds_port *this_port) +static void +scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; - pts_control_value = scu_port_task_scheduler_read(this_port, control); - + pts_control_value = readl(&port->port_task_scheduler_registers->control); pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND); - - scu_port_task_scheduler_write(this_port, control, pts_control_value); + writel(pts_control_value, &port->port_task_scheduler_registers->control); } /* @@ -1763,10 +1755,11 @@ static void scic_sds_port_ready_substate_operational_enter( isci_port_ready(ihost, iport); for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) - scic_sds_port_write_phy_assignment( - sci_port, - sci_port->phy_table[index]); + if (sci_port->phy_table[index]) { + writel(sci_port->physical_port_index, + &sci_port->port_pe_configuration_register[ + sci_port->phy_table[index]->phy_index]); + } } scic_sds_port_update_viit_entry(sci_port); @@ -2308,16 +2301,14 @@ scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = * This method will enable the SCU Port Task Scheduler for this port object but * will leave the port task scheduler in a suspended state. none */ -static void scic_sds_port_enable_port_task_scheduler( - struct scic_sds_port *this_port) +static void +scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; - pts_control_value = scu_port_task_scheduler_read(this_port, control); - + pts_control_value = readl(&port->port_task_scheduler_registers->control); pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); - - scu_port_task_scheduler_write(this_port, control, pts_control_value); + writel(pts_control_value, &port->port_task_scheduler_registers->control); } /** @@ -2327,17 +2318,15 @@ static void scic_sds_port_enable_port_task_scheduler( * This method will disable the SCU port task scheduler for this port object. * none */ -static void scic_sds_port_disable_port_task_scheduler( - struct scic_sds_port *this_port) +static void +scic_sds_port_disable_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; - pts_control_value = scu_port_task_scheduler_read(this_port, control); - - pts_control_value &= ~(SCU_PTSxCR_GEN_BIT(ENABLE) - | SCU_PTSxCR_GEN_BIT(SUSPEND)); - - scu_port_task_scheduler_write(this_port, control, pts_control_value); + pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value &= + ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND)); + writel(pts_control_value, &port->port_task_scheduler_registers->control); } static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) @@ -2359,7 +2348,7 @@ static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) /* ensure hardware has seen the post rnc command and give it * ample time to act before sending the suspend */ - SMU_ISR_READ(scic); /* flush */ + readl(&scic->smu_registers->interrupt_status); /* flush */ udelay(10); command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | @@ -2384,7 +2373,7 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci * controller and give it ample time to act before posting the rnc * invalidate */ - SMU_ISR_READ(scic); /* flush */ + readl(&scic->smu_registers->interrupt_status); /* flush */ udelay(10); command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index a5aa9e1..4cd6bbb 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -289,29 +289,6 @@ static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *s sci_port->started_request_count--; } -/** - * scic_sds_port_write_phy_assignment() - - * - * Helper macro to write the phys port assignment - */ -#define scic_sds_port_write_phy_assignment(port, phy) \ - SCU_PCSPExCR_WRITE(\ - (port), \ - (phy)->phy_index, \ - (port)->physical_port_index \ - ) - -/** - * scic_sds_port_read_phy_assignment() - - * - * Helper macro to read the phys port assignment - */ -#define scic_sds_port_read_phy_assignment(port, phy) \ - SCU_PCSPExCR_READ(\ - (port), \ - (phy)->phy_index \ - ) - #define scic_sds_port_active_phy(port, phy) \ (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) diff --git a/drivers/scsi/isci/core/scic_sds_port_registers.h b/drivers/scsi/isci/core/scic_sds_port_registers.h index dbe82d8..01e24e5 100644 --- a/drivers/scsi/isci/core/scic_sds_port_registers.h +++ b/drivers/scsi/isci/core/scic_sds_port_registers.h @@ -63,85 +63,4 @@ * */ -/** - * scu_port_task_scheduler_read() - - * - * Macro to read the port task scheduler register associated with this port - * object - */ -#define scu_port_task_scheduler_read(port, reg) \ - scu_register_read(\ - scic_sds_port_get_controller(port), \ - (port)->port_task_scheduler_registers->reg \ - ) - -/** - * scu_port_task_scheduler_write() - - * - * Macro to write the port task scheduler register associated with this port - * object - */ -#define scu_port_task_scheduler_write(port, reg, value) \ - scu_register_write(\ - scic_sds_port_get_controller(port), \ - (port)->port_task_scheduler_registers->reg, \ - (value) \ - ) - -#define scu_port_viit_register_write(port, reg, value) \ - scu_register_write(\ - scic_sds_port_get_controller(port), \ - (port)->viit_registers->reg, \ - (value) \ - ) - -/* - * **************************************************************************** - * * Port Task Scheduler registers controlled by the port object - * **************************************************************************** */ - -/** - * SCU_PTSxCR_READ() - - * - * Macro to read the port task scheduler control register - */ -#define SCU_PTSxCR_READ(port) \ - scu_port_task_scheduler_read(port, control) - -/** - * SCU_PTSxCR_WRITE() - - * - * Macro to write the port task scheduler control regsister - */ -#define SCU_PTSxCR_WRITE(port, value) \ - scu_port_task_scheduler_write(port, control, value) - -/* - * **************************************************************************** - * * Port PE Configuration registers - * **************************************************************************** */ - -/** - * SCU_PCSPExCR_WRITE() - - * - * Macro to write the PE Port Configuration Register - */ -#define SCU_PCSPExCR_WRITE(port, phy_id, value) \ - scu_register_write(\ - scic_sds_port_get_controller(port), \ - (port)->port_pe_configuration_register[phy_id], \ - (value) \ - ) - -/** - * SCU_PCSPExCR_READ() - - * - * Macro to read the PE Port Configuration Regsiter - */ -#define SCU_PCSPExCR_READ(port, phy_id) \ - scu_register_read(\ - scic_sds_port_get_controller(port), \ - (port)->port_pe_configuration_register[phy_id] \ - ) - #endif /* _SCIC_SDS_PORT_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 45b8571..d0cbb97 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -62,8 +62,7 @@ #include "scic_io_request.h" #include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_controller_registers.h" -#include "scic_sds_pci.h" +#include "scu_registers.h" #include "scic_sds_port.h" #include "scic_sds_remote_device.h" #include "scic_sds_request.h" @@ -862,20 +861,16 @@ u32 scic_io_request_get_number_of_bytes_transferred( { u32 ret_val = 0; - if (SMU_AMR_READ(scic_sds_request->owning_controller) == 0) { + if (readl(&scic_sds_request->owning_controller->smu_registers->address_modifier) == 0) { /* * get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where * BAR1 is the scu_registers * 0x20002C = 0x200000 + 0x2c * = start of task context SRAM + offset of (type.ssp.data_offset) * TCi is the io_tag of struct scic_sds_request */ - ret_val = scic_sds_pci_read_scu_dword( - scic_sds_request->owning_controller, - ( - (u8 *)scic_sds_request->owning_controller->scu_registers + + ret_val = readl((u8 *)scic_sds_request->owning_controller->scu_registers + (SCU_TASK_CONTEXT_SRAM + SCI_FIELD_OFFSET(struct scu_task_context, type.ssp.data_offset)) + ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(scic_sds_request->io_tag)) - ) ); } diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c index 66be58b..31a3516 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c @@ -315,10 +315,7 @@ enum sci_status scic_sds_unsolicited_frame_control_get_buffer( * @frame_index: This parameter specifies the frame index to attempt to release. * * This method returns an indication to the caller as to whether the - * unsolicited frame get pointer should be updated. true This value indicates - * the unsolicited frame get pointer should be updated (i.e. write - * SCU_UFQGP_WRITE). false This value indicates the get pointer should not be - * updated. + * unsolicited frame get pointer should be updated. */ bool scic_sds_unsolicited_frame_control_release_frame( struct scic_sds_unsolicited_frame_control *uf_control, -- cgit v0.10.2 From ca841f0e862bccd61f537b76c94579c1bd391448 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 28 Mar 2011 09:21:04 -0400 Subject: isci: remove base_controller abstraction Merge struct sci_base_controller into scic_sds_controller, and also factor the two types of state machine handlers into one function. While we're at it also remove lots of duplicate incorrect kerneldoc comments for the state machine handlers. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_controller.h b/drivers/scsi/isci/core/sci_base_controller.h deleted file mode 100644 index 8e0c46f..0000000 --- a/drivers/scsi/isci/core/sci_base_controller.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_CONTROLLER_H_ -#define _SCI_BASE_CONTROLLER_H_ - -#include "intel_sas.h" -#include "sci_controller_constants.h" -#include "sci_base_state.h" -#include "sci_base_memory_descriptor_list.h" -#include "sci_base_state_machine.h" -#include "sci_object.h" - -struct sci_base_memory_descriptor_list; - -/** - * enum sci_base_controller_states - This enumeration depicts all the states - * for the common controller state machine. - * - * - */ -enum sci_base_controller_states { - /** - * Simply the initial state for the base controller state machine. - */ - SCI_BASE_CONTROLLER_STATE_INITIAL = 0, - - /** - * This state indicates that the controller is reset. The memory for - * the controller is in it's initial state, but the controller requires - * initialization. - * This state is entered from the INITIAL state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_CONTROLLER_STATE_RESET, - - /** - * This state is typically an action state that indicates the controller - * is in the process of initialization. In this state no new IO operations - * are permitted. - * This state is entered from the RESET state. - */ - SCI_BASE_CONTROLLER_STATE_INITIALIZING, - - /** - * This state indicates that the controller has been successfully - * initialized. In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - */ - SCI_BASE_CONTROLLER_STATE_INITIALIZED, - - /** - * This state indicates the the controller is in the process of becoming - * ready (i.e. starting). In this state no new IO operations are permitted. - * This state is entered from the INITIALIZED state. - */ - SCI_BASE_CONTROLLER_STATE_STARTING, - - /** - * This state indicates the controller is now ready. Thus, the user - * is able to perform IO operations on the controller. - * This state is entered from the STARTING state. - */ - SCI_BASE_CONTROLLER_STATE_READY, - - /** - * This state is typically an action state that indicates the controller - * is in the process of resetting. Thus, the user is unable to perform - * IO operations on the controller. A reset is considered destructive in - * most cases. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - * This state is entered from the STOPPED state. - */ - SCI_BASE_CONTROLLER_STATE_RESETTING, - - /** - * This state indicates that the controller is in the process of stopping. - * In this state no new IO operations are permitted, but existing IO - * operations are allowed to complete. - * This state is entered from the READY state. - */ - SCI_BASE_CONTROLLER_STATE_STOPPING, - - /** - * This state indicates that the controller has successfully been stopped. - * In this state no new IO operations are permitted. - * This state is entered from the STOPPING state. - */ - SCI_BASE_CONTROLLER_STATE_STOPPED, - - /** - * This state indicates that the controller could not successfully be - * initialized. In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the STARTING state. - * This state is entered from the STOPPING state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_CONTROLLER_STATE_FAILED, - - SCI_BASE_CONTROLLER_MAX_STATES - -}; - -/** - * struct sci_base_controller - The base controller object abstracts the fields - * common to all SCI controller objects. - * - * - */ -struct sci_base_controller { - /** - * The field specifies that the parent object for the base controller - * is the base object itself. - */ - struct sci_base_object parent; - - /** - * This field points to the memory descriptor list associated with this - * controller. The MDL indicates the memory requirements necessary for - * this controller object. - */ - struct sci_base_memory_descriptor_list mdl; - - /** - * This field contains the information for the base controller state - * machine. - */ - struct sci_base_state_machine state_machine; -}; - -/* Forward declarations */ -struct sci_base_remote_device; -struct sci_base_request; - -typedef enum sci_status -(*sci_base_controller_handler_t)(struct sci_base_controller *); - -typedef enum sci_status -(*sci_base_controller_timed_handler_t)(struct sci_base_controller *, u32); - -typedef enum sci_status -(*sci_base_controller_request_handler_t)(struct sci_base_controller *, - struct sci_base_remote_device *, - struct sci_base_request *); - -typedef enum sci_status -(*sci_base_controller_start_request_handler_t)(struct sci_base_controller *, - struct sci_base_remote_device *, - struct sci_base_request *, u16); - -/** - * struct sci_base_controller_state_handler - This structure contains all of - * the state handler methods common to base controller state machines. - * Handler methods provide the ability to change the behavior for user - * requests or transitions depending on the state the machine is in. - * - * - */ -struct sci_base_controller_state_handler { - /** - * The start_handler specifies the method invoked when a user attempts to - * start a controller. - */ - sci_base_controller_timed_handler_t start; - - /** - * The stop_handler specifies the method invoked when a user attempts to - * stop a controller. - */ - sci_base_controller_timed_handler_t stop; - - /** - * The reset_handler specifies the method invoked when a user attempts to - * reset a controller. - */ - sci_base_controller_handler_t reset; - - /** - * The initialize_handler specifies the method invoked when a user - * attempts to initialize a controller. - */ - sci_base_controller_handler_t initialize; - - /** - * The start_io_handler specifies the method invoked when a user - * attempts to start an IO request for a controller. - */ - sci_base_controller_start_request_handler_t start_io; - - /** - * The complete_io_handler specifies the method invoked when a user - * attempts to complete an IO request for a controller. - */ - sci_base_controller_request_handler_t complete_io; - - /** - * The continue_io_handler specifies the method invoked when a user - * attempts to continue an IO request for a controller. - */ - sci_base_controller_request_handler_t continue_io; - - /** - * The start_task_handler specifies the method invoked when a user - * attempts to start a task management request for a controller. - */ - sci_base_controller_start_request_handler_t start_task; - - /** - * The complete_task_handler specifies the method invoked when a user - * attempts to complete a task management request for a controller. - */ - sci_base_controller_request_handler_t complete_task; - -}; - -/** - * sci_base_controller_construct() - Construct the base controller - * @this_controller: This parameter specifies the base controller to be - * constructed. - * @state_table: This parameter specifies the table of state definitions to be - * utilized for the controller state machine. - * @mde_array: This parameter specifies the array of memory descriptor entries - * to be managed by this list. - * @mde_array_length: This parameter specifies the size of the array of entries. - * @next_mdl: This parameter specifies a subsequent MDL object to be managed by - * this MDL object. - * @oem_parameters: This parameter specifies the original equipment - * manufacturer parameters to be utilized by this controller object. - * - */ -static inline void sci_base_controller_construct( - struct sci_base_controller *scic_base, - const struct sci_base_state *state_table, - struct sci_physical_memory_descriptor *mdes, - u32 mde_count, - struct sci_base_memory_descriptor_list *next_mdl) -{ - sci_base_state_machine_construct( - &scic_base->state_machine, - &scic_base->parent, - state_table, - SCI_BASE_CONTROLLER_STATE_INITIAL - ); - - sci_base_mdl_construct(&scic_base->mdl, mdes, mde_count, next_mdl); - - sci_base_state_machine_start(&scic_base->state_machine); -} - -#endif /* _SCI_BASE_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/sci_controller.h b/drivers/scsi/isci/core/sci_controller.h index 5c7774e..01316b1 100644 --- a/drivers/scsi/isci/core/sci_controller.h +++ b/drivers/scsi/isci/core/sci_controller.h @@ -63,36 +63,7 @@ * */ - -struct sci_base_memory_descriptor_list; -struct scic_sds_controller; - #define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF -/** - * sci_controller_get_memory_descriptor_list_handle() - This method simply - * returns a handle for the memory descriptor list associated with the - * supplied controller. The descriptor list provides DMA safe/capable - * memory requirements for this controller. - * @controller: This parameter specifies the controller for which to retrieve - * the DMA safe memory descriptor list. - * - * The user must adhere to the alignment requirements specified in memory - * descriptor. In situations where the operating environment does not offer - * memory allocation utilities supporting alignment, then it is the - * responsibility of the user to manually align the memory buffer for SCI. - * Thus, the user may have to allocate a larger buffer to meet the alignment. - * Additionally, the user will need to remember the actual memory allocation - * addresses in order to ensure the memory can be properly freed when necessary - * to do so. This method will return a valid handle, but the MDL may not be - * accurate until after the user has invoked the associated - * sci_controller_initialize() routine. A pointer to a physical memory - * descriptor array. - */ -struct sci_base_memory_descriptor_list * - sci_controller_get_memory_descriptor_list_handle( - struct scic_sds_controller *controller); - - #endif /* _SCI_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 774c4b3..e7790bb 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -212,12 +212,6 @@ static void scic_sds_controller_power_control_timer_handler( SMU_CQGR_EVENT_CYCLE_BIT \ ) -struct sci_base_memory_descriptor_list * -sci_controller_get_memory_descriptor_list_handle(struct scic_sds_controller *scic) -{ - return &scic->parent.mdl; -} - static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) { struct isci_host *ihost = sci_object_get_association(scic); @@ -688,13 +682,13 @@ static void scic_sds_controller_transition_to_ready( { struct isci_host *ihost = sci_object_get_association(scic); - if (scic->parent.state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_STARTING) { + if (scic->state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_STARTING) { /* * We move into the ready state, because some of the phys/ports * may be up and operational. */ - sci_base_state_machine_change_state(&scic->parent.state_machine, + sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_READY); isci_host_start_complete(ihost, status); @@ -705,7 +699,7 @@ static void scic_sds_controller_timeout_handler(void *_scic) { struct scic_sds_controller *scic = _scic; struct isci_host *ihost = sci_object_get_association(scic); - struct sci_base_state_machine *sm = &scic->parent.state_machine; + struct sci_base_state_machine *sm = &scic->state_machine; if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); @@ -1549,7 +1543,7 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, interrupt_status); - sci_base_state_machine_change_state(&scic->parent.state_machine, + sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_FAILED); return; @@ -1572,7 +1566,7 @@ void scic_sds_controller_link_up( scic_sds_controller_phy_handler_t link_up; u32 state; - state = scic->parent.state_machine.current_state_id; + state = scic->state_machine.current_state_id; link_up = scic_sds_controller_state_handler_table[state].link_up; if (link_up) @@ -1593,7 +1587,7 @@ void scic_sds_controller_link_down( u32 state; scic_sds_controller_phy_handler_t link_down; - state = scic->parent.state_machine.current_state_id; + state = scic->state_machine.current_state_id; link_down = scic_sds_controller_state_handler_table[state].link_down; if (link_down) @@ -1639,7 +1633,7 @@ void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, u32 state; scic_sds_controller_device_handler_t stopped; - state = scic->parent.state_machine.current_state_id; + state = scic->state_machine.current_state_id; stopped = scic_sds_controller_state_handler_table[state].device_stopped; if (stopped) @@ -1969,14 +1963,14 @@ enum sci_status scic_controller_initialize( struct scic_sds_controller *scic) { enum sci_status status = SCI_FAILURE_INVALID_STATE; - sci_base_controller_handler_t initialize; + scic_sds_controller_handler_t initialize; u32 state; - state = scic->parent.state_machine.current_state_id; - initialize = scic_sds_controller_state_handler_table[state].base.initialize; + state = scic->state_machine.current_state_id; + initialize = scic_sds_controller_state_handler_table[state].initialize; if (initialize) - status = initialize(&scic->parent); + status = initialize(scic); else dev_warn(scic_to_dev(scic), "%s: SCIC Controller initialize operation requested " @@ -2050,14 +2044,14 @@ enum sci_status scic_controller_start( u32 timeout) { enum sci_status status = SCI_FAILURE_INVALID_STATE; - sci_base_controller_timed_handler_t start; + scic_sds_controller_timed_handler_t start; u32 state; - state = scic->parent.state_machine.current_state_id; - start = scic_sds_controller_state_handler_table[state].base.start; + state = scic->state_machine.current_state_id; + start = scic_sds_controller_state_handler_table[state].start; if (start) - status = start(&scic->parent, timeout); + status = start(scic, timeout); else dev_warn(scic_to_dev(scic), "%s: SCIC Controller start operation requested in " @@ -2089,14 +2083,14 @@ enum sci_status scic_controller_stop( u32 timeout) { enum sci_status status = SCI_FAILURE_INVALID_STATE; - sci_base_controller_timed_handler_t stop; + scic_sds_controller_timed_handler_t stop; u32 state; - state = scic->parent.state_machine.current_state_id; - stop = scic_sds_controller_state_handler_table[state].base.stop; + state = scic->state_machine.current_state_id; + stop = scic_sds_controller_state_handler_table[state].stop; if (stop) - status = stop(&scic->parent, timeout); + status = stop(scic, timeout); else dev_warn(scic_to_dev(scic), "%s: SCIC Controller stop operation requested in " @@ -2121,14 +2115,14 @@ enum sci_status scic_controller_reset( struct scic_sds_controller *scic) { enum sci_status status = SCI_FAILURE_INVALID_STATE; - sci_base_controller_handler_t reset; + scic_sds_controller_handler_t reset; u32 state; - state = scic->parent.state_machine.current_state_id; - reset = scic_sds_controller_state_handler_table[state].base.reset; + state = scic->state_machine.current_state_id; + reset = scic_sds_controller_state_handler_table[state].reset; if (reset) - status = reset(&scic->parent); + status = reset(scic); else dev_warn(scic_to_dev(scic), "%s: SCIC Controller reset operation requested in " @@ -2171,12 +2165,12 @@ enum sci_io_status scic_controller_start_io( u16 io_tag) { u32 state; - sci_base_controller_start_request_handler_t start_io; + scic_sds_controller_start_request_handler_t start_io; - state = scic->parent.state_machine.current_state_id; - start_io = scic_sds_controller_state_handler_table[state].base.start_io; + state = scic->state_machine.current_state_id; + start_io = scic_sds_controller_state_handler_table[state].start_io; - return start_io(&scic->parent, + return start_io(scic, (struct sci_base_remote_device *) remote_device, (struct sci_base_request *)io_request, io_tag); } @@ -2202,13 +2196,13 @@ enum sci_status scic_controller_terminate_request( struct scic_sds_remote_device *remote_device, struct scic_sds_request *request) { - sci_base_controller_request_handler_t terminate_request; + scic_sds_controller_request_handler_t terminate_request; u32 state; - state = scic->parent.state_machine.current_state_id; + state = scic->state_machine.current_state_id; terminate_request = scic_sds_controller_state_handler_table[state].terminate_request; - return terminate_request(&scic->parent, + return terminate_request(scic, (struct sci_base_remote_device *)remote_device, (struct sci_base_request *)request); } @@ -2241,12 +2235,12 @@ enum sci_status scic_controller_complete_io( struct scic_sds_request *io_request) { u32 state; - sci_base_controller_request_handler_t complete_io; + scic_sds_controller_request_handler_t complete_io; - state = scic->parent.state_machine.current_state_id; - complete_io = scic_sds_controller_state_handler_table[state].base.complete_io; + state = scic->state_machine.current_state_id; + complete_io = scic_sds_controller_state_handler_table[state].complete_io; - return complete_io(&scic->parent, + return complete_io(scic, (struct sci_base_remote_device *)remote_device, (struct sci_base_request *)io_request); } @@ -2286,14 +2280,14 @@ enum sci_task_status scic_controller_start_task( u16 task_tag) { u32 state; - sci_base_controller_start_request_handler_t start_task; + scic_sds_controller_start_request_handler_t start_task; enum sci_task_status status = SCI_TASK_FAILURE_INVALID_STATE; - state = scic->parent.state_machine.current_state_id; - start_task = scic_sds_controller_state_handler_table[state].base.start_task; + state = scic->state_machine.current_state_id; + start_task = scic_sds_controller_state_handler_table[state].start_task; if (start_task) - status = start_task(&scic->parent, + status = start_task(scic, (struct sci_base_remote_device *)remote_device, (struct sci_base_request *)task_request, task_tag); @@ -2326,14 +2320,14 @@ enum sci_status scic_controller_complete_task( struct scic_sds_request *task_request) { u32 state; - sci_base_controller_request_handler_t complete_task; + scic_sds_controller_request_handler_t complete_task; enum sci_status status = SCI_FAILURE_INVALID_STATE; - state = scic->parent.state_machine.current_state_id; - complete_task = scic_sds_controller_state_handler_table[state].base.complete_task; + state = scic->state_machine.current_state_id; + complete_task = scic_sds_controller_state_handler_table[state].complete_task; if (complete_task) - status = complete_task(&scic->parent, + status = complete_task(scic, (struct sci_base_remote_device *)remote_device, (struct sci_base_request *)task_request); else @@ -2518,9 +2512,9 @@ static enum sci_status scic_controller_set_mode( { enum sci_status status = SCI_SUCCESS; - if ((scic->parent.state_machine.current_state_id == + if ((scic->state_machine.current_state_id == SCI_BASE_CONTROLLER_STATE_INITIALIZING) || - (scic->parent.state_machine.current_state_id == + (scic->state_machine.current_state_id == SCI_BASE_CONTROLLER_STATE_INITIALIZED)) { switch (operating_mode) { case SCI_MODE_SPEED: @@ -2583,7 +2577,7 @@ enum sci_status scic_user_parameters_set( struct scic_sds_controller *scic, union scic_user_parameters *scic_parms) { - u32 state = scic->parent.state_machine.current_state_id; + u32 state = scic->state_machine.current_state_id; if (state == SCI_BASE_CONTROLLER_STATE_RESET || state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || @@ -2637,7 +2631,7 @@ enum sci_status scic_oem_parameters_set( struct scic_sds_controller *scic, union scic_oem_parameters *scic_parms) { - u32 state = scic->parent.state_machine.current_state_id; + u32 state = scic->state_machine.current_state_id; if (state == SCI_BASE_CONTROLLER_STATE_RESET || state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || @@ -2819,54 +2813,52 @@ struct scic_sds_controller *scic_controller_alloc(struct device *dev) return devm_kzalloc(dev, sizeof(struct scic_sds_controller), GFP_KERNEL); } -static enum sci_status default_controller_handler(struct sci_base_controller *base_scic, - const char *func) +static enum sci_status +default_controller_handler(struct scic_sds_controller *scic, const char *func) { - struct scic_sds_controller *scic = container_of(base_scic, typeof(*scic), parent); - u32 state = base_scic->state_machine.current_state_id; - - dev_warn(scic_to_dev(scic), "%s: invalid state %d\n", func, state); + dev_warn(scic_to_dev(scic), "%s: invalid state %d\n", func, + scic->state_machine.current_state_id); return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_controller_default_start_operation_handler( - struct sci_base_controller *base_scic, + struct scic_sds_controller *scic, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request, u16 io_tag) { - return default_controller_handler(base_scic, __func__); + return default_controller_handler(scic, __func__); } static enum sci_status scic_sds_controller_default_request_handler( - struct sci_base_controller *base_scic, + struct scic_sds_controller *scic, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request) { - return default_controller_handler(base_scic, __func__); + return default_controller_handler(scic, __func__); } -static enum sci_status scic_sds_controller_general_reset_handler(struct sci_base_controller *base_scic) +static enum sci_status +scic_sds_controller_general_reset_handler(struct scic_sds_controller *scic) { /* The reset operation is not a graceful cleanup just perform the state * transition. */ - sci_base_state_machine_change_state(&base_scic->state_machine, + sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_RESETTING); return SCI_SUCCESS; } -static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct sci_base_controller *base_scic) +static enum sci_status +scic_sds_controller_reset_state_initialize_handler(struct scic_sds_controller *scic) { - struct sci_base_state_machine *sm = &base_scic->state_machine; + struct sci_base_state_machine *sm = &scic->state_machine; enum sci_status result = SCI_SUCCESS; - struct scic_sds_controller *scic; struct isci_host *ihost; u32 index, state; - scic = container_of(base_scic, typeof(*scic), parent); ihost = sci_object_get_association(scic); sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); @@ -3028,13 +3020,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct * * INITIALIZED STATE HANDLERS * ***************************************************************************** */ -/** - * - * @controller: This is the struct sci_base_controller object which is cast - * into a struct scic_sds_controller object. - * @timeout: This is the allowed time for the controller object to reach the - * started state. - * +/* * This function is the struct scic_sds_controller start handler for the * initialized state. * - Validate we have a good memory descriptor table - Initialze the @@ -3049,14 +3035,10 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(struct * descriptor fields is invalid. */ static enum sci_status scic_sds_controller_initialized_state_start_handler( - struct sci_base_controller *base_scic, - u32 timeout) + struct scic_sds_controller *scic, u32 timeout) { u16 index; enum sci_status result; - struct scic_sds_controller *scic; - - scic = container_of(base_scic, typeof(*scic), parent); /* * Make sure that the SCI User filled in the memory descriptor @@ -3119,7 +3101,7 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( isci_timer_start(scic->timeout_timer, timeout); - sci_base_state_machine_change_state(&base_scic->state_machine, + sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_STARTING); } @@ -3180,79 +3162,54 @@ static void scic_sds_controller_starting_state_link_down_handler( /* scic_sds_port_link_down(port, phy); */ } -static enum sci_status scic_sds_controller_ready_state_stop_handler(struct sci_base_controller *base_scic, - u32 timeout) +static enum sci_status scic_sds_controller_ready_state_stop_handler( + struct scic_sds_controller *scic, + u32 timeout) { - struct scic_sds_controller *scic; - - scic = container_of(base_scic, typeof(*scic), parent); isci_timer_start(scic->timeout_timer, timeout); - sci_base_state_machine_change_state(&base_scic->state_machine, + sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_STOPPING); - return SCI_SUCCESS; } -/** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device object. - * @io_request: This is the struct sci_base_request which is cast to a - * SCIC_SDS_IO_REQUEST object. - * @io_tag: This is the IO tag to be assigned to the IO request or - * SCI_CONTROLLER_INVALID_IO_TAG. - * +/* * This method is called when the struct scic_sds_controller is in the ready state and * the start io handler is called. - Start the io request on the remote device * - if successful - assign the io_request to the io_request_table - post the * request to the hardware enum sci_status SCI_SUCCESS if the start io operation * succeeds SCI_FAILURE_INSUFFICIENT_RESOURCES if the IO tag could not be * allocated for the io request. SCI_FAILURE_INVALID_STATE if one or more - * objects are not in a valid state to accept io requests. How does the io_tag - * parameter get assigned to the io request? + * objects are not in a valid state to accept io requests. + * + * XXX: How does the io_tag parameter get assigned to the io request? */ static enum sci_status scic_sds_controller_ready_state_start_io_handler( - struct sci_base_controller *controller, + struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request, u16 io_tag) { enum sci_status status; - struct scic_sds_controller *this_controller; struct scic_sds_request *the_request; struct scic_sds_remote_device *the_device; - this_controller = (struct scic_sds_controller *)controller; the_request = (struct scic_sds_request *)io_request; the_device = (struct scic_sds_remote_device *)remote_device; - status = scic_sds_remote_device_start_io(this_controller, the_device, the_request); - - if (status == SCI_SUCCESS) { - this_controller->io_request_table[ - scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + status = scic_sds_remote_device_start_io(controller, the_device, the_request); - scic_sds_controller_post_request( - this_controller, - scic_sds_request_get_post_context(the_request) - ); - } + if (status != SCI_SUCCESS) + return status; - return status; + controller->io_request_table[ + scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + scic_sds_controller_post_request(controller, + scic_sds_request_get_post_context(the_request)); + return SCI_SUCCESS; } -/** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device object. - * @io_request: This is the struct sci_base_request which is cast to a - * SCIC_SDS_IO_REQUEST object. - * +/* * This method is called when the struct scic_sds_controller is in the ready state and * the complete io handler is called. - Complete the io request on the remote * device - if successful - remove the io_request to the io_request_table @@ -3261,76 +3218,49 @@ static enum sci_status scic_sds_controller_ready_state_start_io_handler( * accept io requests. */ static enum sci_status scic_sds_controller_ready_state_complete_io_handler( - struct sci_base_controller *controller, + struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request) { u16 index; enum sci_status status; - struct scic_sds_controller *this_controller; struct scic_sds_request *the_request; struct scic_sds_remote_device *the_device; - this_controller = (struct scic_sds_controller *)controller; the_request = (struct scic_sds_request *)io_request; the_device = (struct scic_sds_remote_device *)remote_device; - status = scic_sds_remote_device_complete_io( - this_controller, the_device, the_request); - - if (status == SCI_SUCCESS) { - index = scic_sds_io_tag_get_index(the_request->io_tag); - this_controller->io_request_table[index] = NULL; - } + status = scic_sds_remote_device_complete_io(controller, the_device, + the_request); + if (status != SCI_SUCCESS) + return status; - return status; + index = scic_sds_io_tag_get_index(the_request->io_tag); + controller->io_request_table[index] = NULL; + return SCI_SUCCESS; } -/** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device object. - * @io_request: This is the struct sci_base_request which is cast to a - * SCIC_SDS_IO_REQUEST object. - * +/* * This method is called when the struct scic_sds_controller is in the ready state and * the continue io handler is called. enum sci_status */ static enum sci_status scic_sds_controller_ready_state_continue_io_handler( - struct sci_base_controller *controller, + struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request) { - struct scic_sds_controller *this_controller; struct scic_sds_request *the_request; the_request = (struct scic_sds_request *)io_request; - this_controller = (struct scic_sds_controller *)controller; - this_controller->io_request_table[ + controller->io_request_table[ scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; - - scic_sds_controller_post_request( - this_controller, - scic_sds_request_get_post_context(the_request) - ); - + scic_sds_controller_post_request(controller, + scic_sds_request_get_post_context(the_request)); return SCI_SUCCESS; } -/** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device object. - * @io_request: This is the struct sci_base_request which is cast to a - * SCIC_SDS_IO_REQUEST object. - * @task_tag: This is the task tag to be assigned to the task request or - * SCI_CONTROLLER_INVALID_IO_TAG. - * +/* * This method is called when the struct scic_sds_controller is in the ready state and * the start task handler is called. - The remote device is requested to start * the task request - if successful - assign the task to the io_request_table - @@ -3341,33 +3271,28 @@ static enum sci_status scic_sds_controller_ready_state_continue_io_handler( * tag get assigned in this code path? */ static enum sci_status scic_sds_controller_ready_state_start_task_handler( - struct sci_base_controller *controller, + struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request, u16 task_tag) { - struct scic_sds_controller *this_controller = (struct scic_sds_controller *) - controller; struct scic_sds_request *the_request = (struct scic_sds_request *) io_request; struct scic_sds_remote_device *the_device = (struct scic_sds_remote_device *) remote_device; enum sci_status status; - status = scic_sds_remote_device_start_task( - this_controller, the_device, the_request - ); + status = scic_sds_remote_device_start_task(controller, the_device, + the_request); if (status == SCI_SUCCESS) { - this_controller->io_request_table[ + controller->io_request_table[ scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; - scic_sds_controller_post_request( - this_controller, - scic_sds_request_get_post_context(the_request) - ); + scic_sds_controller_post_request(controller, + scic_sds_request_get_post_context(the_request)); } else if (status == SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS) { - this_controller->io_request_table[ + controller->io_request_table[ scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; /* @@ -3379,15 +3304,7 @@ static enum sci_status scic_sds_controller_ready_state_start_task_handler( return status; } -/** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device object. - * @io_request: This is the struct sci_base_request which is cast to a - * SCIC_SDS_IO_REQUEST object. - * +/* * This method is called when the struct scic_sds_controller is in the ready state and * the terminate request handler is called. - call the io request terminate * function - if successful - post the terminate request to the SCU hardware @@ -3396,29 +3313,26 @@ static enum sci_status scic_sds_controller_ready_state_start_task_handler( * accept io requests. */ static enum sci_status scic_sds_controller_ready_state_terminate_request_handler( - struct sci_base_controller *controller, + struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request) { - struct scic_sds_controller *this_controller = (struct scic_sds_controller *) - controller; struct scic_sds_request *the_request = (struct scic_sds_request *) io_request; enum sci_status status; status = scic_sds_io_request_terminate(the_request); - if (status == SCI_SUCCESS) { - /* - * Utilize the original post context command and or in the POST_TC_ABORT - * request sub-type. */ - scic_sds_controller_post_request( - this_controller, - scic_sds_request_get_post_context(the_request) - | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT - ); - } + if (status != SCI_SUCCESS) + return status; - return status; + /* + * Utilize the original post context command and or in the POST_TC_ABORT + * request sub-type. + */ + scic_sds_controller_post_request(controller, + scic_sds_request_get_post_context(the_request) | + SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); + return SCI_SUCCESS; } /** @@ -3470,38 +3384,20 @@ static void scic_sds_controller_ready_state_link_down_handler( * ***************************************************************************** */ /** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device object. - * @io_request: This is the struct sci_base_request which is cast to a - * SCIC_SDS_IO_REQUEST object. - * * This method is called when the struct scic_sds_controller is in a stopping state * and the complete io handler is called. - This function is not yet * implemented enum sci_status SCI_FAILURE */ static enum sci_status scic_sds_controller_stopping_state_complete_io_handler( - struct sci_base_controller *controller, + struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, struct sci_base_request *io_request) { - struct scic_sds_controller *this_controller; - - this_controller = (struct scic_sds_controller *)controller; - - /* / @todo Implement this function */ + /* XXX: Implement this function */ return SCI_FAILURE; } /** - * - * @controller: This is struct sci_base_controller object which is cast into a - * struct scic_sds_controller object. - * @remote_device: This is struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device object. - * * This method is called when the struct scic_sds_controller is in a stopping state * and the remote device has stopped. **/ @@ -3511,8 +3407,7 @@ static void scic_sds_controller_stopping_state_device_stopped_handler( ) { if (!scic_sds_controller_has_remote_devices_stopping(controller)) { - sci_base_state_machine_change_state( - &controller->parent.state_machine, + sci_base_state_machine_change_state(&controller->state_machine, SCI_BASE_CONTROLLER_STATE_STOPPED ); } @@ -3520,77 +3415,77 @@ static void scic_sds_controller_stopping_state_device_stopped_handler( const struct scic_sds_controller_state_handler scic_sds_controller_state_handler_table[] = { [SCI_BASE_CONTROLLER_STATE_INITIAL] = { - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_default_request_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_default_request_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, }, [SCI_BASE_CONTROLLER_STATE_RESET] = { - .base.reset = scic_sds_controller_general_reset_handler, - .base.initialize = scic_sds_controller_reset_state_initialize_handler, - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_default_request_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .reset = scic_sds_controller_general_reset_handler, + .initialize = scic_sds_controller_reset_state_initialize_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_default_request_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, }, [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = { - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_default_request_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_default_request_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, }, [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = { - .base.start = scic_sds_controller_initialized_state_start_handler, - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_default_request_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .start = scic_sds_controller_initialized_state_start_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_default_request_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, }, [SCI_BASE_CONTROLLER_STATE_STARTING] = { - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_default_request_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_default_request_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, .link_up = scic_sds_controller_starting_state_link_up_handler, .link_down = scic_sds_controller_starting_state_link_down_handler }, [SCI_BASE_CONTROLLER_STATE_READY] = { - .base.stop = scic_sds_controller_ready_state_stop_handler, - .base.reset = scic_sds_controller_general_reset_handler, - .base.start_io = scic_sds_controller_ready_state_start_io_handler, - .base.complete_io = scic_sds_controller_ready_state_complete_io_handler, - .base.continue_io = scic_sds_controller_ready_state_continue_io_handler, - .base.start_task = scic_sds_controller_ready_state_start_task_handler, - .base.complete_task = scic_sds_controller_ready_state_complete_io_handler, + .stop = scic_sds_controller_ready_state_stop_handler, + .reset = scic_sds_controller_general_reset_handler, + .start_io = scic_sds_controller_ready_state_start_io_handler, + .complete_io = scic_sds_controller_ready_state_complete_io_handler, + .continue_io = scic_sds_controller_ready_state_continue_io_handler, + .start_task = scic_sds_controller_ready_state_start_task_handler, + .complete_task = scic_sds_controller_ready_state_complete_io_handler, .terminate_request = scic_sds_controller_ready_state_terminate_request_handler, .link_up = scic_sds_controller_ready_state_link_up_handler, .link_down = scic_sds_controller_ready_state_link_down_handler }, [SCI_BASE_CONTROLLER_STATE_RESETTING] = { - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_default_request_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_default_request_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, }, [SCI_BASE_CONTROLLER_STATE_STOPPING] = { - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_stopping_state_complete_io_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_stopping_state_complete_io_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, .device_stopped = scic_sds_controller_stopping_state_device_stopped_handler, }, [SCI_BASE_CONTROLLER_STATE_STOPPED] = { - .base.reset = scic_sds_controller_general_reset_handler, - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_default_request_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .reset = scic_sds_controller_general_reset_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_default_request_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, }, [SCI_BASE_CONTROLLER_STATE_FAILED] = { - .base.reset = scic_sds_controller_general_reset_handler, - .base.start_io = scic_sds_controller_default_start_operation_handler, - .base.complete_io = scic_sds_controller_default_request_handler, - .base.continue_io = scic_sds_controller_default_request_handler, + .reset = scic_sds_controller_general_reset_handler, + .start_io = scic_sds_controller_default_start_operation_handler, + .complete_io = scic_sds_controller_default_request_handler, + .continue_io = scic_sds_controller_default_request_handler, .terminate_request = scic_sds_controller_default_request_handler, }, }; @@ -3612,8 +3507,8 @@ static void scic_sds_controller_initial_state_enter( this_controller = (struct scic_sds_controller *)object; - sci_base_state_machine_change_state( - &this_controller->parent.state_machine, SCI_BASE_CONTROLLER_STATE_RESET); + sci_base_state_machine_change_state(&this_controller->state_machine, + SCI_BASE_CONTROLLER_STATE_RESET); } /** @@ -3718,9 +3613,9 @@ static void scic_sds_controller_resetting_state_enter(struct sci_base_object *ob { struct scic_sds_controller *scic; - scic = container_of(object, typeof(*scic), parent.parent); + scic = container_of(object, typeof(*scic), parent); scic_sds_controller_reset_hardware(scic); - sci_base_state_machine_change_state(&scic->parent.state_machine, + sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_RESET); } @@ -3771,10 +3666,13 @@ enum sci_status scic_controller_construct(struct scic_sds_controller *scic, { u8 i; - sci_base_controller_construct(&scic->parent, - scic_sds_controller_state_table, - scic->memory_descriptors, - ARRAY_SIZE(scic->memory_descriptors), NULL); + sci_base_state_machine_construct(&scic->state_machine, + &scic->parent, scic_sds_controller_state_table, + SCI_BASE_CONTROLLER_STATE_INITIAL); + + sci_base_mdl_construct(&scic->mdl, scic->memory_descriptors, + ARRAY_SIZE(scic->memory_descriptors), NULL); + sci_base_state_machine_start(&scic->state_machine); scic->scu_registers = scu_base; scic->smu_registers = smu_base; diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index baf0b9e..f2d7e9c 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -69,7 +69,9 @@ #include "sci_pool.h" #include "sci_controller_constants.h" #include "sci_memory_descriptor_list.h" -#include "sci_base_controller.h" +#include "sci_base_state.h" +#include "sci_base_state_machine.h" +#include "sci_base_memory_descriptor_list.h" #include "scic_config_parameters.h" #include "scic_sds_port.h" #include "scic_sds_phy.h" @@ -82,11 +84,12 @@ #include "scic_sds_unsolicited_frame_control.h" #include "scic_sds_port_configuration_agent.h" +struct sci_base_remote_device; struct scic_sds_remote_device; +struct sci_base_request; struct scic_sds_request; struct scic_sds_controller; - #define SCU_COMPLETION_RAM_ALIGNMENT (64) /** @@ -166,10 +169,23 @@ struct scic_power_control { */ struct scic_sds_controller { /** - * The struct sci_base_controller is the parent object for the struct scic_sds_controller - * object. + * The field specifies that the parent object for the base controller + * is the base object itself. + */ + struct sci_base_object parent; + + /** + * This field points to the memory descriptor list associated with this + * controller. The MDL indicates the memory requirements necessary for + * this controller object. + */ + struct sci_base_memory_descriptor_list mdl; + + /** + * This field contains the information for the base controller state + * machine. */ - struct sci_base_controller parent; + struct sci_base_state_machine state_machine; /** * This field is the driver timer object handler used to time the controller @@ -376,24 +392,170 @@ struct scic_sds_controller { }; -typedef void (*scic_sds_controller_phy_handler_t)(struct scic_sds_controller *, - struct scic_sds_port *, - struct scic_sds_phy *); +/** + * enum scic_sds_controller_states - This enumeration depicts all the states + * for the common controller state machine. + */ +enum scic_sds_controller_states { + /** + * Simply the initial state for the base controller state machine. + */ + SCI_BASE_CONTROLLER_STATE_INITIAL = 0, -typedef void (*scic_sds_controller_device_handler_t)(struct scic_sds_controller *, - struct scic_sds_remote_device *); + /** + * This state indicates that the controller is reset. The memory for + * the controller is in it's initial state, but the controller requires + * initialization. + * This state is entered from the INITIAL state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_CONTROLLER_STATE_RESET, + /** + * This state is typically an action state that indicates the controller + * is in the process of initialization. In this state no new IO operations + * are permitted. + * This state is entered from the RESET state. + */ + SCI_BASE_CONTROLLER_STATE_INITIALIZING, + + /** + * This state indicates that the controller has been successfully + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + */ + SCI_BASE_CONTROLLER_STATE_INITIALIZED, + + /** + * This state indicates the the controller is in the process of becoming + * ready (i.e. starting). In this state no new IO operations are permitted. + * This state is entered from the INITIALIZED state. + */ + SCI_BASE_CONTROLLER_STATE_STARTING, + + /** + * This state indicates the controller is now ready. Thus, the user + * is able to perform IO operations on the controller. + * This state is entered from the STARTING state. + */ + SCI_BASE_CONTROLLER_STATE_READY, + + /** + * This state is typically an action state that indicates the controller + * is in the process of resetting. Thus, the user is unable to perform + * IO operations on the controller. A reset is considered destructive in + * most cases. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + * This state is entered from the STOPPED state. + */ + SCI_BASE_CONTROLLER_STATE_RESETTING, + + /** + * This state indicates that the controller is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_BASE_CONTROLLER_STATE_STOPPING, + + /** + * This state indicates that the controller has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_BASE_CONTROLLER_STATE_STOPPED, + + /** + * This state indicates that the controller could not successfully be + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the STARTING state. + * This state is entered from the STOPPING state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_CONTROLLER_STATE_FAILED, + + SCI_BASE_CONTROLLER_MAX_STATES + +}; + +typedef enum sci_status (*scic_sds_controller_handler_t) + (struct scic_sds_controller *); +typedef enum sci_status (*scic_sds_controller_timed_handler_t) + (struct scic_sds_controller *, u32); +typedef enum sci_status (*scic_sds_controller_request_handler_t) + (struct scic_sds_controller *, + struct sci_base_remote_device *, + struct sci_base_request *); +typedef enum sci_status (*scic_sds_controller_start_request_handler_t) + (struct scic_sds_controller *, + struct sci_base_remote_device *, + struct sci_base_request *, u16); +typedef void (*scic_sds_controller_phy_handler_t) + (struct scic_sds_controller *, + struct scic_sds_port *, + struct scic_sds_phy *); +typedef void (*scic_sds_controller_device_handler_t) + (struct scic_sds_controller *, + struct scic_sds_remote_device *); -/** - * struct scic_sds_controller_state_handler - - * - * This structure contains the SDS core specific definition for the state - * handlers. - */ struct scic_sds_controller_state_handler { - struct sci_base_controller_state_handler base; + /** + * The start_handler specifies the method invoked when a user attempts to + * start a controller. + */ + scic_sds_controller_timed_handler_t start; + + /** + * The stop_handler specifies the method invoked when a user attempts to + * stop a controller. + */ + scic_sds_controller_timed_handler_t stop; + + /** + * The reset_handler specifies the method invoked when a user attempts to + * reset a controller. + */ + scic_sds_controller_handler_t reset; + + /** + * The initialize_handler specifies the method invoked when a user + * attempts to initialize a controller. + */ + scic_sds_controller_handler_t initialize; + + /** + * The start_io_handler specifies the method invoked when a user + * attempts to start an IO request for a controller. + */ + scic_sds_controller_start_request_handler_t start_io; + + /** + * The complete_io_handler specifies the method invoked when a user + * attempts to complete an IO request for a controller. + */ + scic_sds_controller_request_handler_t complete_io; + + /** + * The continue_io_handler specifies the method invoked when a user + * attempts to continue an IO request for a controller. + */ + scic_sds_controller_request_handler_t continue_io; + + /** + * The start_task_handler specifies the method invoked when a user + * attempts to start a task management request for a controller. + */ + scic_sds_controller_start_request_handler_t start_task; + + /** + * The complete_task_handler specifies the method invoked when a user + * attempts to complete a task management request for a controller. + */ + scic_sds_controller_request_handler_t complete_task; - sci_base_controller_request_handler_t terminate_request; + scic_sds_controller_request_handler_t terminate_request; scic_sds_controller_phy_handler_t link_up; scic_sds_controller_phy_handler_t link_down; scic_sds_controller_device_handler_t device_stopped; diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index a6bcaa1..b4b6be7 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -563,12 +563,11 @@ void scic_sds_remote_device_continue_request(void *dev) /* we need to check if this request is still valid to continue. */ if (sci_req) { struct scic_sds_controller *scic = sci_req->owning_controller; - u32 state = scic->parent.state_machine.current_state_id; - sci_base_controller_request_handler_t continue_io; + u32 state = scic->state_machine.current_state_id; + scic_sds_controller_request_handler_t continue_io; - continue_io = scic_sds_controller_state_handler_table[state].base.continue_io; - continue_io(&scic->parent, &sci_req->target_device->parent, - &sci_req->parent); + continue_io = scic_sds_controller_state_handler_table[state].continue_io; + continue_io(scic, &sci_req->target_device->parent, &sci_req->parent); } } diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 0e961e9c..5dd4896 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -649,7 +649,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( u32 length) { struct scic_sds_stp_request *this_sds_stp_request = (struct scic_sds_stp_request *)this_request; - sci_base_controller_request_handler_t continue_io; + scic_sds_controller_request_handler_t continue_io; struct scu_sgl_element *current_sgl; struct scic_sds_controller *scic; u32 state; @@ -675,9 +675,9 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( /* send the new TC out. */ scic = this_request->owning_controller; - state = scic->parent.state_machine.current_state_id; - continue_io = scic_sds_controller_state_handler_table[state].base.continue_io; - return continue_io(&scic->parent, &this_request->target_device->parent, + state = scic->state_machine.current_state_id; + continue_io = scic_sds_controller_state_handler_table[state].continue_io; + return continue_io(scic, &this_request->target_device->parent, &this_request->parent); } @@ -1822,7 +1822,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet struct sci_base_object *object) { struct scic_sds_request *this_request = (struct scic_sds_request *)object; - sci_base_controller_request_handler_t continue_io; + scic_sds_controller_request_handler_t continue_io; struct scu_task_context *task_context; struct sata_fis_reg_h2d *h2d_fis; struct scic_sds_controller *scic; @@ -1839,10 +1839,10 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet task_context->control_frame = 0; scic = this_request->owning_controller; - state = scic->parent.state_machine.current_state_id; - continue_io = scic_sds_controller_state_handler_table[state].base.continue_io; + state = scic->state_machine.current_state_id; + continue_io = scic_sds_controller_state_handler_table[state].continue_io; - status = continue_io(&scic->parent, &this_request->target_device->parent, + status = continue_io(scic, &this_request->target_device->parent, &this_request->parent); if (status == SCI_SUCCESS) { diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 6644959..adfc245 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -62,6 +62,7 @@ #include "request.h" #include "host.h" #include "probe_roms.h" +#include "core/scic_sds_controller.h" irqreturn_t isci_msix_isr(int vec, void *data) { @@ -231,9 +232,8 @@ static int isci_host_mdl_allocate_coherent( struct coherent_memory_info *mdl_struct; u32 size = 0; - struct sci_base_memory_descriptor_list *mdl_handle - = sci_controller_get_memory_descriptor_list_handle( - isci_host->core_controller); + struct sci_base_memory_descriptor_list *mdl_handle = + &isci_host->core_controller->mdl; sci_mdl_first_entry(mdl_handle); diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 8764385..ac292d2 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -65,7 +65,7 @@ #include #include -#include "sci_base_controller.h" +#include "core/sci_object.h" #include "scic_controller.h" #include "host.h" #include "timers.h" -- cgit v0.10.2 From 38aa74eb704c5886a5ded4085acd5f2895ab3511 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 28 Mar 2011 09:21:14 -0400 Subject: isci: remove base_request abstraction Merge struct sci_base_request into scic_sds_request, and also factor the two types of state machine handlers into one function. While we're at it also remove lots of duplicate incorrect kerneldoc comments for the state machine handlers. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_remote_device.h b/drivers/scsi/isci/core/sci_base_remote_device.h index 45414ce..5db5f31 100644 --- a/drivers/scsi/isci/core/sci_base_remote_device.h +++ b/drivers/scsi/isci/core/sci_base_remote_device.h @@ -65,7 +65,7 @@ #include "sci_base_state_machine.h" -struct sci_base_request; +struct scic_sds_request; /** * enum sci_base_remote_device_states - This enumeration depicts all the states @@ -159,12 +159,12 @@ typedef enum sci_status (*sci_base_remote_device_handler_t)( typedef enum sci_status (*sci_base_remote_device_request_handler_t)( struct sci_base_remote_device *, - struct sci_base_request * + struct scic_sds_request * ); typedef enum sci_status (*sci_base_remote_device_high_priority_request_complete_handler_t)( struct sci_base_remote_device *, - struct sci_base_request *, + struct scic_sds_request *, void *, enum sci_io_status ); diff --git a/drivers/scsi/isci/core/sci_base_request.h b/drivers/scsi/isci/core/sci_base_request.h deleted file mode 100644 index 223aa4c..0000000 --- a/drivers/scsi/isci/core/sci_base_request.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_REQUST_H_ -#define _SCI_BASE_REQUST_H_ - -/** - * This file contains all of the constants, types, and method declarations for - * the SCI base IO and task request objects. - * - * - */ - -#include "sci_base_state_machine.h" - -/** - * enum sci_base_request_states - This enumeration depicts all the states for - * the common request state machine. - * - * - */ -enum sci_base_request_states { - /** - * Simply the initial state for the base request state machine. - */ - SCI_BASE_REQUEST_STATE_INITIAL, - - /** - * This state indicates that the request has been constructed. This state - * is entered from the INITIAL state. - */ - SCI_BASE_REQUEST_STATE_CONSTRUCTED, - - /** - * This state indicates that the request has been started. This state is - * entered from the CONSTRUCTED state. - */ - SCI_BASE_REQUEST_STATE_STARTED, - - /** - * This state indicates that the request has completed. - * This state is entered from the STARTED state. This state is entered from - * the ABORTING state. - */ - SCI_BASE_REQUEST_STATE_COMPLETED, - - /** - * This state indicates that the request is in the process of being - * terminated/aborted. - * This state is entered from the CONSTRUCTED state. - * This state is entered from the STARTED state. - */ - SCI_BASE_REQUEST_STATE_ABORTING, - - /** - * Simply the final state for the base request state machine. - */ - SCI_BASE_REQUEST_STATE_FINAL, -}; - -/** - * struct sci_base_request - The base request object abstracts the fields - * common to all SCI IO and task request objects. - * - * - */ -struct sci_base_request { - /** - * The field specifies that the parent object for the base request is the - * base object itself. - */ - struct sci_base_object parent; - - /** - * This field contains the information for the base request state machine. - */ - struct sci_base_state_machine state_machine; -}; - -typedef enum sci_status (*sci_base_request_handler_t)( - struct sci_base_request *this_request - ); - -/** - * struct sci_base_request_state_handler - This structure contains all of the - * state handler methods common to base IO and task request state machines. - * Handler methods provide the ability to change the behavior for user - * requests or transitions depending on the state the machine is in. - * - * - */ -struct sci_base_request_state_handler { - /** - * The start_handler specifies the method invoked when a user attempts to - * start a request. - */ - sci_base_request_handler_t start_handler; - - /** - * The abort_handler specifies the method invoked when a user attempts to - * abort a request. - */ - sci_base_request_handler_t abort_handler; - - /** - * The complete_handler specifies the method invoked when a user attempts to - * complete a request. - */ - sci_base_request_handler_t complete_handler; - - /** - * The destruct_handler specifies the method invoked when a user attempts to - * destruct a request. - */ - sci_base_request_handler_t destruct_handler; - -}; - -/** - * sci_base_request_construct() - Construct the base request. - * @this_request: This parameter specifies the base request to be constructed. - * @state_table: This parameter specifies the table of state definitions to be - * utilized for the request state machine. - * - */ -static inline void sci_base_request_construct( - struct sci_base_request *base_req, - const struct sci_base_state *my_state_table) -{ - base_req->parent.private = NULL; - sci_base_state_machine_construct( - &base_req->state_machine, - &base_req->parent, - my_state_table, - SCI_BASE_REQUEST_STATE_INITIAL - ); - - sci_base_state_machine_start( - &base_req->state_machine - ); -} - -#endif /* _SCI_BASE_REQUST_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index e7790bb..7ead6f3 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -2161,7 +2161,7 @@ enum sci_status scic_controller_reset( enum sci_io_status scic_controller_start_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request, + struct scic_sds_request *request, u16 io_tag) { u32 state; @@ -2172,7 +2172,7 @@ enum sci_io_status scic_controller_start_io( return start_io(scic, (struct sci_base_remote_device *) remote_device, - (struct sci_base_request *)io_request, io_tag); + request, io_tag); } /** @@ -2204,7 +2204,7 @@ enum sci_status scic_controller_terminate_request( return terminate_request(scic, (struct sci_base_remote_device *)remote_device, - (struct sci_base_request *)request); + request); } /** @@ -2232,7 +2232,7 @@ enum sci_status scic_controller_terminate_request( enum sci_status scic_controller_complete_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request) + struct scic_sds_request *request) { u32 state; scic_sds_controller_request_handler_t complete_io; @@ -2242,7 +2242,7 @@ enum sci_status scic_controller_complete_io( return complete_io(scic, (struct sci_base_remote_device *)remote_device, - (struct sci_base_request *)io_request); + request); } /** @@ -2289,7 +2289,7 @@ enum sci_task_status scic_controller_start_task( if (start_task) status = start_task(scic, (struct sci_base_remote_device *)remote_device, - (struct sci_base_request *)task_request, + task_request, task_tag); else dev_warn(scic_to_dev(scic), @@ -2329,7 +2329,7 @@ enum sci_status scic_controller_complete_task( if (complete_task) status = complete_task(scic, (struct sci_base_remote_device *)remote_device, - (struct sci_base_request *)task_request); + task_request); else dev_warn(scic_to_dev(scic), "%s: SCIC Controller completing task from invalid " @@ -2825,7 +2825,7 @@ default_controller_handler(struct scic_sds_controller *scic, const char *func) static enum sci_status scic_sds_controller_default_start_operation_handler( struct scic_sds_controller *scic, struct sci_base_remote_device *remote_device, - struct sci_base_request *io_request, + struct scic_sds_request *request, u16 io_tag) { return default_controller_handler(scic, __func__); @@ -2834,7 +2834,7 @@ static enum sci_status scic_sds_controller_default_start_operation_handler( static enum sci_status scic_sds_controller_default_request_handler( struct scic_sds_controller *scic, struct sci_base_remote_device *remote_device, - struct sci_base_request *io_request) + struct scic_sds_request *request) { return default_controller_handler(scic, __func__); } @@ -3186,26 +3186,24 @@ static enum sci_status scic_sds_controller_ready_state_stop_handler( static enum sci_status scic_sds_controller_ready_state_start_io_handler( struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, - struct sci_base_request *io_request, + struct scic_sds_request *request, u16 io_tag) { enum sci_status status; - struct scic_sds_request *the_request; struct scic_sds_remote_device *the_device; - the_request = (struct scic_sds_request *)io_request; the_device = (struct scic_sds_remote_device *)remote_device; - status = scic_sds_remote_device_start_io(controller, the_device, the_request); + status = scic_sds_remote_device_start_io(controller, the_device, request); if (status != SCI_SUCCESS) return status; controller->io_request_table[ - scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + scic_sds_io_tag_get_index(request->io_tag)] = request; scic_sds_controller_post_request(controller, - scic_sds_request_get_post_context(the_request)); + scic_sds_request_get_post_context(request)); return SCI_SUCCESS; } @@ -3220,22 +3218,20 @@ static enum sci_status scic_sds_controller_ready_state_start_io_handler( static enum sci_status scic_sds_controller_ready_state_complete_io_handler( struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, - struct sci_base_request *io_request) + struct scic_sds_request *request) { u16 index; enum sci_status status; - struct scic_sds_request *the_request; struct scic_sds_remote_device *the_device; - the_request = (struct scic_sds_request *)io_request; the_device = (struct scic_sds_remote_device *)remote_device; status = scic_sds_remote_device_complete_io(controller, the_device, - the_request); + request); if (status != SCI_SUCCESS) return status; - index = scic_sds_io_tag_get_index(the_request->io_tag); + index = scic_sds_io_tag_get_index(request->io_tag); controller->io_request_table[index] = NULL; return SCI_SUCCESS; } @@ -3247,16 +3243,12 @@ static enum sci_status scic_sds_controller_ready_state_complete_io_handler( static enum sci_status scic_sds_controller_ready_state_continue_io_handler( struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, - struct sci_base_request *io_request) + struct scic_sds_request *request) { - struct scic_sds_request *the_request; - - the_request = (struct scic_sds_request *)io_request; - controller->io_request_table[ - scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + scic_sds_io_tag_get_index(request->io_tag)] = request; scic_sds_controller_post_request(controller, - scic_sds_request_get_post_context(the_request)); + scic_sds_request_get_post_context(request)); return SCI_SUCCESS; } @@ -3273,27 +3265,25 @@ static enum sci_status scic_sds_controller_ready_state_continue_io_handler( static enum sci_status scic_sds_controller_ready_state_start_task_handler( struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, - struct sci_base_request *io_request, + struct scic_sds_request *request, u16 task_tag) { - struct scic_sds_request *the_request = (struct scic_sds_request *) - io_request; struct scic_sds_remote_device *the_device = (struct scic_sds_remote_device *) remote_device; enum sci_status status; status = scic_sds_remote_device_start_task(controller, the_device, - the_request); + request); if (status == SCI_SUCCESS) { controller->io_request_table[ - scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + scic_sds_io_tag_get_index(request->io_tag)] = request; scic_sds_controller_post_request(controller, - scic_sds_request_get_post_context(the_request)); + scic_sds_request_get_post_context(request)); } else if (status == SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS) { controller->io_request_table[ - scic_sds_io_tag_get_index(the_request->io_tag)] = the_request; + scic_sds_io_tag_get_index(request->io_tag)] = request; /* * We will let framework know this task request started successfully, @@ -3315,13 +3305,11 @@ static enum sci_status scic_sds_controller_ready_state_start_task_handler( static enum sci_status scic_sds_controller_ready_state_terminate_request_handler( struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, - struct sci_base_request *io_request) + struct scic_sds_request *request) { - struct scic_sds_request *the_request = (struct scic_sds_request *) - io_request; enum sci_status status; - status = scic_sds_io_request_terminate(the_request); + status = scic_sds_io_request_terminate(request); if (status != SCI_SUCCESS) return status; @@ -3330,7 +3318,7 @@ static enum sci_status scic_sds_controller_ready_state_terminate_request_handler * request sub-type. */ scic_sds_controller_post_request(controller, - scic_sds_request_get_post_context(the_request) | + scic_sds_request_get_post_context(request) | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); return SCI_SUCCESS; } @@ -3391,7 +3379,7 @@ static void scic_sds_controller_ready_state_link_down_handler( static enum sci_status scic_sds_controller_stopping_state_complete_io_handler( struct scic_sds_controller *controller, struct sci_base_remote_device *remote_device, - struct sci_base_request *io_request) + struct scic_sds_request *request) { /* XXX: Implement this function */ return SCI_FAILURE; diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index f2d7e9c..5cff806 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -86,7 +86,6 @@ struct sci_base_remote_device; struct scic_sds_remote_device; -struct sci_base_request; struct scic_sds_request; struct scic_sds_controller; @@ -487,11 +486,11 @@ typedef enum sci_status (*scic_sds_controller_timed_handler_t) typedef enum sci_status (*scic_sds_controller_request_handler_t) (struct scic_sds_controller *, struct sci_base_remote_device *, - struct sci_base_request *); + struct scic_sds_request *); typedef enum sci_status (*scic_sds_controller_start_request_handler_t) (struct scic_sds_controller *, struct sci_base_remote_device *, - struct sci_base_request *, u16); + struct scic_sds_request *, u16); typedef void (*scic_sds_controller_phy_handler_t) (struct scic_sds_controller *, struct scic_sds_port *, diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 8e3983e..ef9cb9e 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -1090,15 +1090,7 @@ static enum sci_status scic_sds_port_ready_substate_stop_handler( return SCI_SUCCESS; } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * @device: This is the struct sci_base_remote_device object which is not used in this - * function. - * @io_request: This is the struct sci_base_request object which is not used in this - * function. - * +/* * This method is the general ready substate complete io handler for the * struct scic_sds_port object. This function decrments the outstanding request count * for this port object. enum sci_status SCI_SUCCESS @@ -1194,15 +1186,7 @@ static void scic_sds_port_ready_waiting_substate_link_up_handler( ); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * @device: This is the struct sci_base_remote_device object which is not used in this - * request. - * @io_request: This is the struct sci_base_request object which is not used in this - * function. - * +/* * This method is the ready waiting substate start io handler for the * struct scic_sds_port object. The port object can not accept new requests so the * request is failed. enum sci_status SCI_FAILURE_INVALID_STATE @@ -1316,15 +1300,7 @@ static void scic_sds_port_ready_operational_substate_link_down_handler( SCIC_SDS_PORT_READY_SUBSTATE_WAITING); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * @device: This is the struct sci_base_remote_device object which is not used in this - * function. - * @io_request: This is the struct sci_base_request object which is not used in this - * function. - * +/* * This method is the ready operational substate start io handler for the * struct scic_sds_port object. This function incremetns the outstanding request * count for this port object. enum sci_status SCI_SUCCESS diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index b4b6be7..cb49a33 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -363,7 +363,7 @@ enum sci_status scic_sds_remote_device_start_io( struct scic_sds_request *io_request) { return this_device->state_handlers->parent.start_io_handler( - &this_device->parent, &io_request->parent); + &this_device->parent, io_request); } /** @@ -381,7 +381,7 @@ enum sci_status scic_sds_remote_device_complete_io( struct scic_sds_request *io_request) { return this_device->state_handlers->parent.complete_io_handler( - &this_device->parent, &io_request->parent); + &this_device->parent, io_request); } /** @@ -399,7 +399,7 @@ enum sci_status scic_sds_remote_device_start_task( struct scic_sds_request *io_request) { return this_device->state_handlers->parent.start_task_handler( - &this_device->parent, &io_request->parent); + &this_device->parent, io_request); } /** @@ -567,7 +567,7 @@ void scic_sds_remote_device_continue_request(void *dev) scic_sds_controller_request_handler_t continue_io; continue_io = scic_sds_controller_state_handler_table[state].continue_io; - continue_io(scic, &sci_req->target_device->parent, &sci_req->parent); + continue_io(scic, &sci_req->target_device->parent, sci_req); } } @@ -792,21 +792,21 @@ enum sci_status scic_sds_remote_device_default_frame_handler( enum sci_status scic_sds_remote_device_default_start_request_handler( struct sci_base_remote_device *base_dev, - struct sci_base_request *request) + struct scic_sds_request *request) { return default_device_handler(base_dev, __func__); } enum sci_status scic_sds_remote_device_default_complete_request_handler( struct sci_base_remote_device *base_dev, - struct sci_base_request *request) + struct scic_sds_request *request) { return default_device_handler(base_dev, __func__); } enum sci_status scic_sds_remote_device_default_continue_request_handler( struct sci_base_remote_device *base_dev, - struct sci_base_request *request) + struct scic_sds_request *request) { return default_device_handler(base_dev, __func__); } @@ -1019,13 +1019,7 @@ enum sci_status scic_sds_remote_device_ready_state_reset_handler( return SCI_SUCCESS; } -/** - * - * @device: The struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device for which the request is to be started. - * @request: The struct sci_base_request which is cast to a SCIC_SDS_IO_REQUEST that - * is to be started. - * +/* * This method will attempt to start a task request for this device object. The * remote device object will issue the start request for the task and if * successful it will start the request for the port object then increment its @@ -1035,38 +1029,28 @@ enum sci_status scic_sds_remote_device_ready_state_reset_handler( */ static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { enum sci_status result; struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - struct scic_sds_request *task_request = (struct scic_sds_request *)request; /* See if the port is in a state where we can start the IO request */ result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(this_device), this_device, task_request); + scic_sds_remote_device_get_port(this_device), this_device, request); if (result == SCI_SUCCESS) { result = scic_sds_remote_node_context_start_task( - this_device->rnc, task_request - ); - - if (result == SCI_SUCCESS) { - result = scic_sds_request_start(task_request); - } + this_device->rnc, request); + if (result == SCI_SUCCESS) + result = scic_sds_request_start(request); - scic_sds_remote_device_start_request(this_device, task_request, result); + scic_sds_remote_device_start_request(this_device, request, result); } return result; } -/** - * - * @device: The struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device for which the request is to be started. - * @request: The struct sci_base_request which is cast to a SCIC_SDS_IO_REQUEST that - * is to be started. - * +/* * This method will attempt to start an io request for this device object. The * remote device object will issue the start request for the io and if * successful it will start the request for the port object then increment its @@ -1076,38 +1060,28 @@ static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( */ static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { enum sci_status result; struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - struct scic_sds_request *io_request = (struct scic_sds_request *)request; /* See if the port is in a state where we can start the IO request */ result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(this_device), this_device, io_request); + scic_sds_remote_device_get_port(this_device), this_device, request); if (result == SCI_SUCCESS) { result = scic_sds_remote_node_context_start_io( - this_device->rnc, io_request - ); + this_device->rnc, request); + if (result == SCI_SUCCESS) + result = scic_sds_request_start(request); - if (result == SCI_SUCCESS) { - result = scic_sds_request_start(io_request); - } - - scic_sds_remote_device_start_request(this_device, io_request, result); + scic_sds_remote_device_start_request(this_device, request, result); } return result; } -/** - * - * @device: The struct sci_base_remote_device which is cast to a - * struct scic_sds_remote_device for which the request is to be completed. - * @request: The struct sci_base_request which is cast to a SCIC_SDS_IO_REQUEST that - * is to be completed. - * +/* * This method will complete the request for the remote device object. The * method will call the completion handler for the request object and if * successful it will complete the request on the port object then decrement @@ -1115,18 +1089,17 @@ static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( */ static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { enum sci_status result; struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - struct scic_sds_request *the_request = (struct scic_sds_request *)request; - result = scic_sds_request_complete(the_request); + result = scic_sds_request_complete(request); if (result == SCI_SUCCESS) { /* See if the port is in a state where we can start the IO request */ result = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(this_device), this_device, the_request); + scic_sds_remote_device_get_port(this_device), this_device, request); if (result == SCI_SUCCESS) { scic_sds_remote_device_decrement_request_count(this_device); @@ -1178,19 +1151,16 @@ static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( */ static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { enum sci_status status = SCI_SUCCESS; - struct scic_sds_request *this_request = (struct scic_sds_request *)request; struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - status = scic_sds_request_complete(this_request); + status = scic_sds_request_complete(request); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( scic_sds_remote_device_get_port(this_device), - this_device, - this_request - ); + this_device, request); if (status == SCI_SUCCESS) { scic_sds_remote_device_decrement_request_count(this_device); @@ -1255,11 +1225,7 @@ static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( return SCI_SUCCESS; } -/** - * - * @device: The device object for which the request is completing. - * @request: The task request that is being completed. - * +/* * This method completes requests for this struct scic_sds_remote_device while it is * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the * complete method for the request object and if that is successful the port @@ -1268,17 +1234,16 @@ static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( */ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { enum sci_status status = SCI_SUCCESS; - struct scic_sds_request *this_request = (struct scic_sds_request *)request; struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - status = scic_sds_request_complete(this_request); + status = scic_sds_request_complete(request); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(this_device), this_device, this_request); + scic_sds_remote_device_get_port(this_device), this_device, request); if (status == SCI_SUCCESS) { scic_sds_remote_device_decrement_request_count(this_device); diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index 725c058..90b2318 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -65,7 +65,6 @@ #include "intel_sas.h" #include "sci_base_remote_device.h" -#include "sci_base_request.h" #include "scu_remote_node_context.h" #include "scic_sds_remote_node_context.h" @@ -507,15 +506,15 @@ enum sci_status scic_sds_remote_device_default_reset_complete_handler( enum sci_status scic_sds_remote_device_default_start_request_handler( struct sci_base_remote_device *device, - struct sci_base_request *request); + struct scic_sds_request *request); enum sci_status scic_sds_remote_device_default_complete_request_handler( struct sci_base_remote_device *device, - struct sci_base_request *request); + struct scic_sds_request *request); enum sci_status scic_sds_remote_device_default_continue_request_handler( struct sci_base_remote_device *device, - struct sci_base_request *request); + struct scic_sds_request *request); enum sci_status scic_sds_remote_device_default_suspend_handler( struct scic_sds_remote_device *this_device, diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index d0cbb97..7c21de0 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -57,7 +57,6 @@ #include "intel_sas.h" #include "intel_sata.h" #include "intel_sat.h" -#include "sci_base_request.h" #include "scic_controller.h" #include "scic_io_request.h" #include "scic_remote_device.h" @@ -728,10 +727,8 @@ enum sci_status scic_io_request_construct_basic_ssp( scic_sds_io_request_build_ssp_command_iu(sci_req); - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return SCI_SUCCESS; } @@ -746,10 +743,8 @@ enum sci_status scic_task_request_construct_ssp( /* Fill in the SSP Task IU */ scic_sds_task_request_build_ssp_task_iu(sci_req); - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return SCI_SUCCESS; } @@ -780,10 +775,8 @@ enum sci_status scic_io_request_construct_basic_sata( status = scic_io_request_construct_sata(sci_req, proto, len, dir, copy); if (status == SCI_SUCCESS) - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return status; } @@ -818,10 +811,8 @@ enum sci_status scic_task_request_construct_sata( } if (status == SCI_SUCCESS) - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return status; } @@ -891,18 +882,12 @@ u32 scic_io_request_get_number_of_bytes_transferred( * This method invokes the base state start request handler for the * SCIC_SDS_IO_REQUEST_T object. enum sci_status */ -enum sci_status scic_sds_request_start( - struct scic_sds_request *this_request) +enum sci_status +scic_sds_request_start(struct scic_sds_request *request) { - if ( - this_request->device_sequence - == scic_sds_remote_device_get_sequence(this_request->target_device) - ) { - return this_request->state_handlers->parent.start_handler( - &this_request->parent - ); - } - + if (request->device_sequence == + scic_sds_remote_device_get_sequence(request->target_device)) + return request->state_handlers->start_handler(request); return SCI_FAILURE; } @@ -914,11 +899,10 @@ enum sci_status scic_sds_request_start( * This method invokes the base state terminate request handber for the * SCIC_SDS_IO_REQUEST_T object. enum sci_status */ -enum sci_status scic_sds_io_request_terminate( - struct scic_sds_request *this_request) +enum sci_status +scic_sds_io_request_terminate(struct scic_sds_request *request) { - return this_request->state_handlers->parent.abort_handler( - &this_request->parent); + return request->state_handlers->abort_handler(request); } /** @@ -929,11 +913,10 @@ enum sci_status scic_sds_io_request_terminate( * This method invokes the base state request completion handler for the * SCIC_SDS_IO_REQUEST_T object. enum sci_status */ -enum sci_status scic_sds_io_request_complete( - struct scic_sds_request *this_request) +enum sci_status +scic_sds_io_request_complete(struct scic_sds_request *request) { - return this_request->state_handlers->parent.complete_handler( - &this_request->parent); + return request->state_handlers->complete_handler(request); } /** @@ -1023,175 +1006,132 @@ void scic_sds_io_request_copy_response(struct scic_sds_request *sds_request) * * DEFAULT STATE HANDLERS * ***************************************************************************** */ -/** - * scic_sds_request_default_start_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_start() request. The default action is * to log a warning and return a failure status. enum sci_status * SCI_FAILURE_INVALID_STATE */ enum sci_status scic_sds_request_default_start_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *scic_request = - (struct scic_sds_request *)request; - - dev_warn(scic_to_dev(scic_request->owning_controller), + dev_warn(scic_to_dev(request->owning_controller), "%s: SCIC IO Request requested to start while in wrong " "state %d\n", __func__, - sci_base_state_machine_get_state( - &((struct scic_sds_request *)request)->parent.state_machine)); + sci_base_state_machine_get_state(&request->state_machine)); return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_request_default_abort_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *scic_request = - (struct scic_sds_request *)request; - - dev_warn(scic_to_dev(scic_request->owning_controller), + dev_warn(scic_to_dev(request->owning_controller), "%s: SCIC IO Request requested to abort while in wrong " "state %d\n", __func__, - sci_base_state_machine_get_state( - &((struct scic_sds_request *)request)->parent.state_machine)); + sci_base_state_machine_get_state(&request->state_machine)); return SCI_FAILURE_INVALID_STATE; } -/** - * scic_sds_request_default_complete_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_complete() request. The default action * is to log a warning and return a failure status. enum sci_status * SCI_FAILURE_INVALID_STATE */ enum sci_status scic_sds_request_default_complete_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *scic_request = - (struct scic_sds_request *)request; - - dev_warn(scic_to_dev(scic_request->owning_controller), + dev_warn(scic_to_dev(request->owning_controller), "%s: SCIC IO Request requested to complete while in wrong " "state %d\n", __func__, - sci_base_state_machine_get_state( - &((struct scic_sds_request *)request)->parent.state_machine)); + sci_base_state_machine_get_state(&request->state_machine)); return SCI_FAILURE_INVALID_STATE; } -/** - * scic_sds_request_default_destruct_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_complete() request. The default action * is to log a warning and return a failure status. enum sci_status * SCI_FAILURE_INVALID_STATE */ enum sci_status scic_sds_request_default_destruct_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *scic_request = - (struct scic_sds_request *)request; - - dev_warn(scic_to_dev(scic_request->owning_controller), + dev_warn(scic_to_dev(request->owning_controller), "%s: SCIC IO Request requested to destroy while in wrong " "state %d\n", __func__, - sci_base_state_machine_get_state( - &((struct scic_sds_request *)request)->parent.state_machine)); + sci_base_state_machine_get_state(&request->state_machine)); return SCI_FAILURE_INVALID_STATE; } /** - * scic_sds_request_default_tc_completion_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_task_request_complete() request. The default * action is to log a warning and return a failure status. enum sci_status * SCI_FAILURE_INVALID_STATE */ enum sci_status scic_sds_request_default_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *request, u32 completion_code) { - dev_warn(scic_to_dev(this_request->owning_controller), + dev_warn(scic_to_dev(request->owning_controller), "%s: SCIC IO Request given task completion notification %x " "while in wrong state %d\n", __func__, completion_code, - sci_base_state_machine_get_state( - &this_request->parent.state_machine)); + sci_base_state_machine_get_state(&request->state_machine)); return SCI_FAILURE_INVALID_STATE; } -/** - * scic_sds_request_default_event_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_event_handler() request. The default * action is to log a warning and return a failure status. enum sci_status * SCI_FAILURE_INVALID_STATE */ enum sci_status scic_sds_request_default_event_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *request, u32 event_code) { - dev_warn(scic_to_dev(this_request->owning_controller), + dev_warn(scic_to_dev(request->owning_controller), "%s: SCIC IO Request given event code notification %x while " "in wrong state %d\n", __func__, event_code, - sci_base_state_machine_get_state( - &this_request->parent.state_machine)); + sci_base_state_machine_get_state(&request->state_machine)); return SCI_FAILURE_INVALID_STATE; } -/** - * scic_sds_request_default_frame_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_event_handler() request. The default * action is to log a warning and return a failure status. enum sci_status * SCI_FAILURE_INVALID_STATE */ enum sci_status scic_sds_request_default_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *request, u32 frame_index) { - dev_warn(scic_to_dev(this_request->owning_controller), + dev_warn(scic_to_dev(request->owning_controller), "%s: SCIC IO Request given unexpected frame %x while in " "state %d\n", __func__, frame_index, - sci_base_state_machine_get_state( - &this_request->parent.state_machine)); + sci_base_state_machine_get_state(&request->state_machine)); scic_sds_controller_release_frame( - this_request->owning_controller, frame_index); + request->owning_controller, frame_index); return SCI_FAILURE_INVALID_STATE; } @@ -1201,11 +1141,7 @@ enum sci_status scic_sds_request_default_frame_handler( * * CONSTRUCTED STATE HANDLERS * ***************************************************************************** */ -/** - * scic_sds_request_constructed_state_start_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method implements the action taken when a constructed * SCIC_SDS_IO_REQUEST_T object receives a scic_sds_request_start() request. * This method will, if necessary, allocate a TCi for the io request object and @@ -1215,34 +1151,33 @@ enum sci_status scic_sds_request_default_frame_handler( * SCI_SUCCESS SCI_FAILURE_INSUFFICIENT_RESOURCES */ static enum sci_status scic_sds_request_constructed_state_start_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { struct scu_task_context *task_context; - struct scic_sds_request *this_request = (struct scic_sds_request *)request; - if (this_request->io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { - this_request->io_tag = - scic_controller_allocate_io_tag(this_request->owning_controller); + if (request->io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + request->io_tag = + scic_controller_allocate_io_tag(request->owning_controller); } /* Record the IO Tag in the request */ - if (this_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { - task_context = this_request->task_context_buffer; + if (request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { + task_context = request->task_context_buffer; - task_context->task_index = scic_sds_io_tag_get_index(this_request->io_tag); + task_context->task_index = scic_sds_io_tag_get_index(request->io_tag); switch (task_context->protocol_type) { case SCU_TASK_CONTEXT_PROTOCOL_SMP: case SCU_TASK_CONTEXT_PROTOCOL_SSP: /* SSP/SMP Frame */ - task_context->type.ssp.tag = this_request->io_tag; + task_context->type.ssp.tag = request->io_tag; task_context->type.ssp.target_port_transfer_tag = 0xFFFF; break; case SCU_TASK_CONTEXT_PROTOCOL_STP: /* * STP/SATA Frame - * task_context->type.stp.ncq_tag = this_request->ncq_tag; */ + * task_context->type.stp.ncq_tag = request->ncq_tag; */ break; case SCU_TASK_CONTEXT_PROTOCOL_NONE: @@ -1257,20 +1192,17 @@ static enum sci_status scic_sds_request_constructed_state_start_handler( /* * Check to see if we need to copy the task context buffer * or have been building into the task context buffer */ - if (this_request->was_tag_assigned_by_user == false) { + if (request->was_tag_assigned_by_user == false) { scic_sds_controller_copy_task_context( - this_request->owning_controller, this_request - ); + request->owning_controller, request); } /* Add to the post_context the io tag value */ - this_request->post_context |= scic_sds_io_tag_get_index(this_request->io_tag); + request->post_context |= scic_sds_io_tag_get_index(request->io_tag); /* Everything is good go ahead and change state */ - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_STARTED - ); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_STARTED); return SCI_SUCCESS; } @@ -1278,35 +1210,24 @@ static enum sci_status scic_sds_request_constructed_state_start_handler( return SCI_FAILURE_INSUFFICIENT_RESOURCES; } -/** - * scic_sds_request_constructed_state_abort_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_terminate() request. Since the request * has not yet been posted to the hardware the request transitions to the * completed state. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_request_constructed_state_abort_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *this_request = (struct scic_sds_request *)request; - /* * This request has been terminated by the user make sure that the correct * status code is returned */ - scic_sds_request_set_status( - this_request, + scic_sds_request_set_status(request, SCU_TASK_DONE_TASK_ABORT, - SCI_FAILURE_IO_TERMINATED - ); - - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + SCI_FAILURE_IO_TERMINATED); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } @@ -1315,30 +1236,20 @@ static enum sci_status scic_sds_request_constructed_state_abort_handler( * * STARTED STATE HANDLERS * ***************************************************************************** */ -/** - * scic_sds_request_started_state_abort_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_terminate() request. Since the request * has been posted to the hardware the io request state is changed to the * aborting state. enum sci_status SCI_SUCCESS */ enum sci_status scic_sds_request_started_state_abort_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *this_request = (struct scic_sds_request *)request; - - if (this_request->has_started_substate_machine) { - sci_base_state_machine_stop(&this_request->started_substate_machine); - } - - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_ABORTING - ); + if (request->has_started_substate_machine) + sci_base_state_machine_stop(&request->started_substate_machine); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_ABORTING); return SCI_SUCCESS; } @@ -1512,20 +1423,12 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( */ /* In all cases we will treat this as the completion of the IO request. */ - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - + sci_base_state_machine_change_state(&this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } -/** - * scic_sds_request_started_state_frame_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * @frame_index: This is the index of the unsolicited frame to be processed. - * +/* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_frame_handler() request. This method * first determines the frame type received. If this is a response frame then @@ -1601,11 +1504,7 @@ static enum sci_status scic_sds_request_started_state_frame_handler( * ***************************************************************************** */ -/** - * scic_sds_request_completed_state_complete_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_complete() request. This method frees up * any io request resources that have been allocated and transitions the @@ -1613,26 +1512,20 @@ static enum sci_status scic_sds_request_started_state_frame_handler( * transitioning to the final state? enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_request_completed_state_complete_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *this_request = (struct scic_sds_request *)request; - - if (this_request->was_tag_assigned_by_user != true) { + if (request->was_tag_assigned_by_user != true) { scic_controller_free_io_tag( - this_request->owning_controller, this_request->io_tag - ); + request->owning_controller, request->io_tag); } - if (this_request->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) { + if (request->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) { scic_sds_controller_release_frame( - this_request->owning_controller, this_request->saved_rx_frame_index); + request->owning_controller, request->saved_rx_frame_index); } - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_FINAL - ); - + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_FINAL); return SCI_SUCCESS; } @@ -1641,11 +1534,7 @@ static enum sci_status scic_sds_request_completed_state_complete_handler( * * ABORTING STATE HANDLERS * ***************************************************************************** */ -/** - * scic_sds_request_aborting_state_abort_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_terminate() request. This method is the * io request aborting state abort handlers. On receipt of a multiple @@ -1653,23 +1542,14 @@ static enum sci_status scic_sds_request_completed_state_complete_handler( * This should not happen in normal operation. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_request_aborting_state_abort_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *this_request = (struct scic_sds_request *)request; - - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } -/** - * scic_sds_request_aborting_state_tc_completion_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_task_completion() request. This method * decodes the completion type waiting for the abort task complete @@ -1687,10 +1567,8 @@ static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( this_request, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED ); - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + sci_base_state_machine_change_state(&this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; default: @@ -1703,11 +1581,7 @@ static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( return SCI_SUCCESS; } -/** - * scic_sds_request_aborting_state_frame_handler() - - * @request: This is the struct sci_base_request object that is cast to the - * SCIC_SDS_IO_REQUEST_T object for which the start operation is requested. - * +/* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_frame_handler() request. This method * discards the unsolicited frame since we are waiting for the abort task @@ -1727,58 +1601,58 @@ static enum sci_status scic_sds_request_aborting_state_frame_handler( static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_default_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_default_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, }, [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { - .parent.start_handler = scic_sds_request_constructed_state_start_handler, - .parent.abort_handler = scic_sds_request_constructed_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_constructed_state_start_handler, + .abort_handler = scic_sds_request_constructed_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, }, [SCI_BASE_REQUEST_STATE_STARTED] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_started_state_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_started_state_frame_handler, }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_default_abort_handler, - .parent.complete_handler = scic_sds_request_completed_state_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_default_abort_handler, + .complete_handler = scic_sds_request_completed_state_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, }, [SCI_BASE_REQUEST_STATE_ABORTING] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_aborting_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_aborting_state_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_aborting_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_aborting_state_frame_handler, }, [SCI_BASE_REQUEST_STATE_FINAL] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_default_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_default_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, }, }; @@ -1978,7 +1852,11 @@ static void scic_sds_general_request_construct(struct scic_sds_controller *scic, void *user_io_request_object, struct scic_sds_request *sci_req) { - sci_base_request_construct(&sci_req->parent, scic_sds_request_state_table); + sci_req->parent.private = NULL; + sci_base_state_machine_construct(&sci_req->state_machine, &sci_req->parent, + scic_sds_request_state_table, SCI_BASE_REQUEST_STATE_INITIAL); + sci_base_state_machine_start(&sci_req->state_machine); + sci_req->io_tag = io_tag; sci_req->user_request = user_io_request_object; sci_req->owning_controller = scic; @@ -2070,7 +1948,7 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, /* Construct the started sub-state machine. */ sci_base_state_machine_construct( &sci_req->started_substate_machine, - &sci_req->parent.parent, + &sci_req->parent, scic_sds_io_request_started_task_mgmt_substate_table, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION ); diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 286b749..5b0f885 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -64,8 +64,7 @@ */ #include "scic_io_request.h" - -#include "sci_base_request.h" +#include "sci_base_state_machine.h" #include "scu_task_context.h" #include "intel_sas.h" @@ -127,9 +126,15 @@ enum scic_sds_smp_request_started_substates { */ struct scic_sds_request { /** - * This field indictes the parent object of the request. + * The field specifies that the parent object for the base request is the + * base object itself. */ - struct sci_base_request parent; + struct sci_base_object parent; + + /** + * This field contains the information for the base request state machine. + */ + struct sci_base_state_machine state_machine; void *user_request; @@ -231,15 +236,59 @@ struct scic_sds_request { }; +/** + * enum sci_base_request_states - This enumeration depicts all the states for + * the common request state machine. + * + * + */ +enum sci_base_request_states { + /** + * Simply the initial state for the base request state machine. + */ + SCI_BASE_REQUEST_STATE_INITIAL, + + /** + * This state indicates that the request has been constructed. This state + * is entered from the INITIAL state. + */ + SCI_BASE_REQUEST_STATE_CONSTRUCTED, + + /** + * This state indicates that the request has been started. This state is + * entered from the CONSTRUCTED state. + */ + SCI_BASE_REQUEST_STATE_STARTED, + + /** + * This state indicates that the request has completed. + * This state is entered from the STARTED state. This state is entered from + * the ABORTING state. + */ + SCI_BASE_REQUEST_STATE_COMPLETED, -typedef enum sci_status -(*scic_sds_io_request_frame_handler_t)(struct scic_sds_request *req, u32 frame); + /** + * This state indicates that the request is in the process of being + * terminated/aborted. + * This state is entered from the CONSTRUCTED state. + * This state is entered from the STARTED state. + */ + SCI_BASE_REQUEST_STATE_ABORTING, -typedef enum sci_status -(*scic_sds_io_request_event_handler_t)(struct scic_sds_request *req, u32 event); + /** + * Simply the final state for the base request state machine. + */ + SCI_BASE_REQUEST_STATE_FINAL, +}; -typedef enum sci_status -(*scic_sds_io_request_task_completion_handler_t)(struct scic_sds_request *req, u32 completion_code); +typedef enum sci_status (*scic_sds_io_request_handler_t) + (struct scic_sds_request *request); +typedef enum sci_status (*scic_sds_io_request_frame_handler_t) + (struct scic_sds_request *req, u32 frame); +typedef enum sci_status (*scic_sds_io_request_event_handler_t) + (struct scic_sds_request *req, u32 event); +typedef enum sci_status (*scic_sds_io_request_task_completion_handler_t) + (struct scic_sds_request *req, u32 completion_code); /** * struct scic_sds_io_request_state_handler - This is the SDS core definition @@ -248,7 +297,30 @@ typedef enum sci_status * */ struct scic_sds_io_request_state_handler { - struct sci_base_request_state_handler parent; + /** + * The start_handler specifies the method invoked when a user attempts to + * start a request. + */ + scic_sds_io_request_handler_t start_handler; + + /** + * The abort_handler specifies the method invoked when a user attempts to + * abort a request. + */ + scic_sds_io_request_handler_t abort_handler; + + /** + * The complete_handler specifies the method invoked when a user attempts to + * complete a request. + */ + scic_sds_io_request_handler_t complete_handler; + + /** + * The destruct_handler specifies the method invoked when a user attempts to + * destruct a request. + */ + scic_sds_io_request_handler_t destruct_handler; + scic_sds_io_request_task_completion_handler_t tc_completion_handler; scic_sds_io_request_event_handler_t event_handler; @@ -319,7 +391,7 @@ extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substat } #define scic_sds_request_complete(a_request) \ - ((a_request)->state_handlers->parent.complete_handler(&(a_request)->parent)) + ((a_request)->state_handlers->complete_handler(a_request)) @@ -331,15 +403,15 @@ extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substat * struct scic_sds_io_request object. */ #define scic_sds_io_request_tc_completion(this_request, completion_code) \ - { \ - if (this_request->parent.state_machine.current_state_id \ - == SCI_BASE_REQUEST_STATE_STARTED \ - && this_request->has_started_substate_machine \ - == false) \ - scic_sds_request_started_state_tc_completion_handler(this_request, completion_code); \ - else \ - this_request->state_handlers->tc_completion_handler(this_request, completion_code); \ - } +{ \ + if (this_request->state_machine.current_state_id \ + == SCI_BASE_REQUEST_STATE_STARTED \ + && this_request->has_started_substate_machine \ + == false) \ + scic_sds_request_started_state_tc_completion_handler(this_request, completion_code); \ + else \ + this_request->state_handlers->tc_completion_handler(this_request, completion_code); \ +} /** * SCU_SGL_ZERO() - @@ -426,14 +498,14 @@ enum sci_status scic_sds_task_request_terminate( * ***************************************************************************** */ enum sci_status scic_sds_request_default_start_handler( - struct sci_base_request *this_request); + struct scic_sds_request *request); enum sci_status scic_sds_request_default_complete_handler( - struct sci_base_request *this_request); + struct scic_sds_request *request); enum sci_status scic_sds_request_default_destruct_handler( - struct sci_base_request *this_request); + struct scic_sds_request *request); enum sci_status scic_sds_request_default_tc_completion_handler( struct scic_sds_request *this_request, @@ -453,7 +525,7 @@ enum sci_status scic_sds_request_default_frame_handler( * ***************************************************************************** */ enum sci_status scic_sds_request_started_state_abort_handler( - struct sci_base_request *this_request); + struct scic_sds_request *request); enum sci_status scic_sds_request_started_state_tc_completion_handler( struct scic_sds_request *this_request, diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index 06cb932..040a3d8 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -78,29 +78,24 @@ */ static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { enum sci_status status; struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - struct scic_sds_request *io_request = (struct scic_sds_request *)request; /* Will the port allow the io request to start? */ status = this_device->owning_port->state_handlers->start_io_handler( - this_device->owning_port, - this_device, - io_request - ); + this_device->owning_port, this_device, request); if (status == SCI_SUCCESS) { status = - scic_sds_remote_node_context_start_io(this_device->rnc, io_request); + scic_sds_remote_node_context_start_io(this_device->rnc, request); - if (status == SCI_SUCCESS) { - status = scic_sds_request_start(io_request); - } + if (status == SCI_SUCCESS) + status = scic_sds_request_start(request); if (status == SCI_SUCCESS) { - this_device->working_request = io_request; + this_device->working_request = request; sci_base_state_machine_change_state( &this_device->ready_substate_machine, @@ -108,7 +103,7 @@ static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_h ); } - scic_sds_remote_device_start_request(this_device, io_request, status); + scic_sds_remote_device_start_request(this_device, request, status); } return status; @@ -129,7 +124,7 @@ static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_h */ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { return SCI_FAILURE_INVALID_STATE; } @@ -144,7 +139,7 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_ha */ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { enum sci_status status; struct scic_sds_remote_device *this_device; diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 84b0fdd..9293c2d 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -394,7 +394,7 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &this_request->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); } @@ -433,9 +433,8 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): @@ -452,9 +451,8 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; default: @@ -468,9 +466,8 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -502,9 +499,8 @@ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_ha ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; default: @@ -518,9 +514,8 @@ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_ha ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -530,22 +525,22 @@ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_ha static const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[] = { [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_smp_request_await_response_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_smp_request_await_response_frame_handler, }, [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, } }; @@ -626,7 +621,7 @@ enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) /* Construct the started sub-state machine. */ sci_base_state_machine_construct( &sci_req->started_substate_machine, - &sci_req->parent.parent, + &sci_req->parent, scic_sds_smp_request_started_substate_table, SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE ); @@ -657,10 +652,8 @@ enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) scu_smp_request_construct_task_context(sci_req, smp_req); - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); kfree(smp_req); diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index c9aa35f..1eecb19 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -120,10 +120,8 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + sci_base_state_machine_change_state(&this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -143,20 +141,12 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi * pattern for this particular device). */ static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *this_request = (struct scic_sds_request *)request; - - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_ABORTING - ); - - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_ABORTING); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } @@ -176,41 +166,36 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler * probably update to check frame type and make sure it is a response frame. */ static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *request, u32 frame_index) { - scic_sds_io_request_copy_response(this_request); - - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - - scic_sds_controller_release_frame( - this_request->owning_controller, frame_index - ); + scic_sds_io_request_copy_response(request); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + scic_sds_controller_release_frame(request->owning_controller, + frame_index); return SCI_SUCCESS; } static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[] = { [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, }, [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, } }; diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c index 9635b37..2d551ad 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c @@ -659,16 +659,12 @@ enum sci_status scic_sds_stp_packet_request_command_phase_await_d2h_fis_frame_ha } enum sci_status scic_sds_stp_packet_request_started_completion_delay_complete_handler( - struct sci_base_request *request) + struct scic_sds_request *request) { - struct scic_sds_request *this_request = (struct scic_sds_request *)request; + sci_base_state_machine_change_state(&request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - - return this_request->sci_status; + return request->sci_status; } /* --------------------------------------------------------------------------- */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index 0a00a40..bb58249 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -78,22 +78,20 @@ */ static enum sci_status scic_sds_stp_remote_device_complete_request( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - struct scic_sds_request *the_request = (struct scic_sds_request *)request; enum sci_status status; - status = scic_sds_io_request_complete(the_request); + status = scic_sds_io_request_complete(request); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( - this_device->owning_port, this_device, the_request - ); + this_device->owning_port, this_device, request); if (status == SCI_SUCCESS) { scic_sds_remote_device_decrement_request_count(this_device); - if (the_request->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + if (request->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { /* * This request causes hardware error, device needs to be Lun Reset. * So here we force the state machine to IDLE state so the rest IOs @@ -119,7 +117,7 @@ static enum sci_status scic_sds_stp_remote_device_complete_request( __func__, this_device->owning_port, this_device, - the_request, + request, status); return status; @@ -143,64 +141,54 @@ static enum sci_status scic_sds_stp_remote_device_complete_request( */ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { enum sci_status status; struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - struct scic_sds_request *this_request = (struct scic_sds_request *)request; /* Will the port allow the io request to start? */ status = this_device->owning_port->state_handlers->start_io_handler( - this_device->owning_port, - this_device, - this_request - ); - - if (SCI_SUCCESS == status) { - status = - scic_sds_remote_node_context_start_task(this_device->rnc, this_request); - - if (SCI_SUCCESS == status) { - status = this_request->state_handlers->parent.start_handler(request); - } - - if (status == SCI_SUCCESS) { - /* - * / @note If the remote device state is not IDLE this will replace - * / the request that probably resulted in the task management - * / request. */ - this_device->working_request = this_request; - - sci_base_state_machine_change_state( - &this_device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD - ); + this_device->owning_port, this_device, request); + if (status != SCI_SUCCESS) + return status; - /* - * The remote node context must cleanup the TCi to NCQ mapping table. - * The only way to do this correctly is to either write to the TLCR - * register or to invalidate and repost the RNC. In either case the - * remote node context state machine will take the correct action when - * the remote node context is suspended and later resumed. */ - scic_sds_remote_node_context_suspend( - this_device->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); - - scic_sds_remote_node_context_resume( - this_device->rnc, - scic_sds_remote_device_continue_request, - this_device); - } + status = scic_sds_remote_node_context_start_task(this_device->rnc, request); + if (status != SCI_SUCCESS) + goto out; - scic_sds_remote_device_start_request(this_device, this_request, status); + status = request->state_handlers->start_handler(request); + if (status != SCI_SUCCESS) + goto out; - /* - * We need to let the controller start request handler know that it can't - * post TC yet. We will provide a callback function to post TC when RNC gets - * resumed. */ - return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; - } + /* + * Note: If the remote device state is not IDLE this will replace + * the request that probably resulted in the task management request. + */ + this_device->working_request = request; + sci_base_state_machine_change_state(&this_device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - return status; + /* + * The remote node context must cleanup the TCi to NCQ mapping table. + * The only way to do this correctly is to either write to the TLCR + * register or to invalidate and repost the RNC. In either case the + * remote node context state machine will take the correct action when + * the remote node context is suspended and later resumed. + */ + scic_sds_remote_node_context_suspend(this_device->rnc, + SCI_SOFTWARE_SUSPENSION, NULL, NULL); + scic_sds_remote_node_context_resume(this_device->rnc, + scic_sds_remote_device_continue_request, + this_device); + +out: + scic_sds_remote_device_start_request(this_device, request, status); + /* + * We need to let the controller start request handler know that it can't + * post TC yet. We will provide a callback function to post TC when RNC gets + * resumed. + */ + return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; } /* @@ -221,53 +209,39 @@ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_h */ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( struct sci_base_remote_device *base_device, - struct sci_base_request *base_request) + struct scic_sds_request *request) { enum sci_status status; struct scic_sds_remote_device *device = (struct scic_sds_remote_device *)&base_device->parent; - struct scic_sds_request *sds_request = - (struct scic_sds_request *)&base_request->parent; struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sds_request); + (struct isci_request *)sci_object_get_association(request); /* Will the port allow the io request to start? */ status = device->owning_port->state_handlers->start_io_handler( - device->owning_port, - device, - sds_request); - - if (status == SCI_SUCCESS) { - status = - scic_sds_remote_node_context_start_io(device->rnc, - sds_request); - - if (status == SCI_SUCCESS) - status = - sds_request->state_handlers-> - parent.start_handler(base_request); + device->owning_port, device, request); + if (status != SCI_SUCCESS) + return status; - if (status == SCI_SUCCESS) { - if (isci_sata_get_sat_protocol(isci_request) == - SAT_PROTOCOL_FPDMA) - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); - else { - device->working_request = sds_request; + status = scic_sds_remote_node_context_start_io(device->rnc, request); + if (status != SCI_SUCCESS) + goto out; - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - } - } + status = request->state_handlers->start_handler(request); + if (status != SCI_SUCCESS) + goto out; - scic_sds_remote_device_start_request(device, - sds_request, - status); + if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { + sci_base_state_machine_change_state(&device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); + } else { + device->working_request = request; + sci_base_state_machine_change_state(&device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); } - +out: + scic_sds_remote_device_start_request(device, request, status); return status; } @@ -308,33 +282,30 @@ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_hand static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( struct sci_base_remote_device *base_device, - struct sci_base_request *base_request) + struct scic_sds_request *request) { enum sci_status status; struct scic_sds_remote_device *device = (struct scic_sds_remote_device *)&base_device->parent; - struct scic_sds_request *sds_request = - (struct scic_sds_request *)&base_request->parent; struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sds_request); + (struct isci_request *)sci_object_get_association(request); if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { status = device->owning_port->state_handlers->start_io_handler( device->owning_port, device, - sds_request); + request); if (status == SCI_SUCCESS) { status = scic_sds_remote_node_context_start_io( device->rnc, - sds_request); + request); if (status == SCI_SUCCESS) - status = sds_request->state_handlers-> - parent.start_handler(base_request); + status = request->state_handlers->start_handler(request); scic_sds_remote_device_start_request(device, - sds_request, + request, status); } } else @@ -422,7 +393,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl */ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { return SCI_FAILURE_INVALID_STATE; } @@ -475,7 +446,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handl * ***************************************************************************** */ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; } @@ -494,7 +465,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_sta */ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( struct sci_base_remote_device *device, - struct sci_base_request *request) + struct scic_sds_request *request) { struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; struct scic_sds_request *the_request = (struct scic_sds_request *)request; diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 5dd4896..6d0a178 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -465,8 +465,7 @@ static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_han ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED - ); + &this_request->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -495,7 +494,7 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; status = scic_sds_unsolicited_frame_control_get_header( - &(this_request->parent.owning_controller->uf_control), + &this_request->parent.owning_controller->uf_control, frame_index, (void **)&frame_header ); @@ -504,7 +503,7 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( switch (frame_header->fis_type) { case SATA_FIS_TYPE_REGD2H: scic_sds_unsolicited_frame_control_get_buffer( - &(this_request->parent.owning_controller->uf_control), + &this_request->parent.owning_controller->uf_control, frame_index, (void **)&frame_buffer ); @@ -536,14 +535,13 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( } sci_base_state_machine_change_state( - &this_request->parent.parent.state_machine, + &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame( - this_request->parent.owning_controller, frame_index - ); + this_request->parent.owning_controller, frame_index); } else dev_err(scic_to_dev(request->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " @@ -557,22 +555,22 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, } }; @@ -625,7 +623,7 @@ enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); sci_base_state_machine_construct(&sci_req->started_substate_machine, - &sci_req->parent.parent, + &sci_req->parent, scic_sds_stp_request_started_non_data_substate_table, SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE); @@ -677,8 +675,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( scic = this_request->owning_controller; state = scic->state_machine.current_state_id; continue_io = scic_sds_controller_state_handler_table[state].continue_io; - return continue_io(scic, &this_request->target_device->parent, - &this_request->parent); + return continue_io(scic, &this_request->target_device->parent, this_request); } /** @@ -859,7 +856,7 @@ static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completi ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &this_request->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); break; @@ -961,7 +958,7 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( ); sci_base_state_machine_change_state( - &this_request->parent.parent.state_machine, + &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); } else { @@ -1056,12 +1053,12 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler ); sci_base_state_machine_change_state( - &this_request->parent.parent.state_machine, + &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); } else { sci_base_state_machine_change_state( - &this_request->parent.started_substate_machine, + &request->started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE ); } @@ -1083,7 +1080,7 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler ); sci_base_state_machine_change_state( - &this_request->parent.parent.state_machine, + &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); @@ -1160,7 +1157,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_com ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &this_request->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); break; @@ -1215,40 +1212,40 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, - .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, + .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, } }; @@ -1352,7 +1349,7 @@ enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_ } sci_base_state_machine_construct(&sci_req->started_substate_machine, - &sci_req->parent.parent, + &sci_req->parent, scic_sds_stp_request_started_pio_substate_table, SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE); @@ -1360,18 +1357,13 @@ enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_ } static void scic_sds_stp_request_udma_complete_request( - struct scic_sds_request *this_request, + struct scic_sds_request *request, u32 scu_status, enum sci_status sci_status) { - scic_sds_request_set_status( - this_request, scu_status, sci_status - ); - - sci_base_state_machine_change_state( - &this_request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + scic_sds_request_set_status(request, scu_status, sci_status); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); } /** @@ -1518,22 +1510,22 @@ static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_stp_request_udma_general_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_udma_general_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, }, }; @@ -1590,7 +1582,7 @@ enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci sci_base_state_machine_construct( &sci_req->started_substate_machine, - &sci_req->parent.parent, + &sci_req->parent, scic_sds_stp_request_started_udma_substate_table, SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE ); @@ -1635,8 +1627,7 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_com ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED - ); + &this_request->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -1679,9 +1670,8 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_c SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); - sci_base_state_machine_change_state( - &this_request->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED - ); + sci_base_state_machine_change_state(&this_request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -1753,9 +1743,8 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( } sci_base_state_machine_change_state( - &this_request->parent.parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &this_request->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame( @@ -1774,31 +1763,31 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_request_default_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, + .start_handler = scic_sds_request_default_start_handler, + .abort_handler = scic_sds_request_started_state_abort_handler, + .complete_handler = scic_sds_request_default_complete_handler, + .destruct_handler = scic_sds_request_default_destruct_handler, + .tc_completion_handler = scic_sds_request_default_tc_completion_handler, + .event_handler = scic_sds_request_default_event_handler, + .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, }, }; @@ -1842,8 +1831,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet state = scic->state_machine.current_state_id; continue_io = scic_sds_controller_state_handler_table[state].continue_io; - status = continue_io(scic, &this_request->target_device->parent, - &this_request->parent); + status = continue_io(scic, &this_request->target_device->parent, this_request); if (status == SCI_SUCCESS) { SET_STATE_HANDLER( @@ -1888,7 +1876,7 @@ enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_reques scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); sci_base_state_machine_construct(&sci_req->started_substate_machine, - &sci_req->parent.parent, + &sci_req->parent, scic_sds_stp_request_started_soft_reset_substate_table, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); -- cgit v0.10.2 From 78141676784ed190ce2546f97a7d6368f21e450b Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 31 Mar 2011 11:01:39 -0400 Subject: isci: kill dead data structurs in scic_io_request.h Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h index fea894a..1ac530d 100644 --- a/drivers/scsi/isci/core/scic_io_request.h +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -72,186 +72,6 @@ struct scic_sds_remote_device; struct scic_sds_controller; /** - * struct scic_io_parameters - This structure contains additional optional - * parameters for SSP IO requests. These parameters are utilized with the - * scic_io_request_construct_advanced_ssp() method. - * - * Add Block-guard/DIF, TLR - */ -struct scic_io_parameters { - /** - * This sub-structure contains SCSI specific features (for use with SSP - * IO requests). - */ - struct { - /** - * Data Integrity Format (DIF) is also known as protection information - * or block-guard. This sub-structure contains DIF specific feature - * information for SSP IO requests. - */ - struct { - void *placeholder; - } dif; - - /** - * Transport Layer Retries (TLR) is an SSP protocol specific feature. - * This sub-structure contains Transport Layer Retries (TLR) specific - * feature information for SSP IO requests. - */ - struct { - void *placeholder; - } tlr; - - } scsi; - -}; - -/** - * struct scic_passthru_request_callbacks - This structure contains the pointer - * to the callback functions for constructing the passthrough request common - * to SSP, SMP and STP. This structure must be set by the win sci layer - * before the passthrough build is called - * - * - */ -struct scic_passthru_request_callbacks { - /** - * Function pointer to get the phy identifier for passthrough request. - */ - u32 (*scic_cb_passthru_get_phy_identifier)(void *, u8 *); - /** - * Function pointer to get the port identifier for passthrough request. - */ - u32 (*scic_cb_passthru_get_port_identifier)(void *, u8 *); - /** - * Function pointer to get the connection rate for passthrough request. - */ - u32 (*scic_cb_passthru_get_connection_rate)(void *, void *); - /** - * Function pointer to get the destination sas address for passthrough request. - */ - void (*scic_cb_passthru_get_destination_sas_address)(void *, u8 **); - /** - * Function pointer to get the transfer length for passthrough request. - */ - u32 (*scic_cb_passthru_get_transfer_length)(void *); - /** - * Function pointer to get the data direction for passthrough request. - */ - u32 (*scic_cb_passthru_get_data_direction)(void *); - -}; - -/** - * struct scic_ssp_passthru_request_callbacks - This structure contains the - * pointer to the callback functions for constructing the passthrough - * request specific to SSP. This structure must be set by the win sci layer - * before the passthrough build is called - * - * - */ -struct scic_ssp_passthru_request_callbacks { - /** - * Common callbacks for all Passthru requests - */ - struct scic_passthru_request_callbacks common_callbacks; - /** - * Function pointer to get the lun for passthrough request. - */ - void (*scic_cb_ssp_passthru_get_lun)(void *, u8 **); - /** - * Function pointer to get the cdb - */ - void (*scic_cb_ssp_passthru_get_cdb)(void *, u32 *, u8 **, u32 *, u8 **); - /** - * Function pointer to get the task attribute for passthrough request. - */ - u32 (*scic_cb_ssp_passthru_get_task_attribute)(void *); -}; - -/** - * struct scic_stp_passthru_request_callbacks - This structure contains the - * pointer to the callback functions for constructing the passthrough - * request specific to STP. This structure must be set by the win sci layer - * before the passthrough build is called - * - * - */ -struct scic_stp_passthru_request_callbacks { - /** - * Common callbacks for all Passthru requests - */ - struct scic_passthru_request_callbacks common_callbacks; - /** - * Function pointer to get the protocol for passthrough request. - */ - u8 (*scic_cb_stp_passthru_get_protocol)(void *); - /** - * Function pointer to get the resgister fis - */ - void (*scic_cb_stp_passthru_get_register_fis)(void *, u8 **); - /** - * Function pointer to get the MULTIPLE_COUNT (bits 5,6,7 in Byte 1 in the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) - */ - u8 (*scic_cb_stp_passthru_get_multiplecount)(void *); - /** - * Function pointer to get the EXTEND (bit 0 in Byte 1 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) - */ - u8 (*scic_cb_stp_passthru_get_extend)(void *); - /** - * Function pointer to get the CK_COND (bit 5 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) - */ - u8 (*scic_cb_stp_passthru_get_ckcond)(void *); - /** - * Function pointer to get the T_DIR (bit 3 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) - */ - u8 (*scic_cb_stp_passthru_get_tdir)(void *); - /** - * Function pointer to get the BYTE_BLOCK (bit 2 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) - */ - u8 (*scic_cb_stp_passthru_get_byteblock)(void *); - /** - * Function pointer to get the T_LENGTH (bits 0,1 in Byte 2 the SAT-specific SCSI extenstion in ATA Pass-through (0x85)) - */ - u8 (*scic_cb_stp_passthru_get_tlength)(void *); - -}; - -/** - * struct scic_smp_passthru_request_callbacks - This structure contains the - * pointer to the callback functions for constructing the passthrough - * request specific to SMP. This structure must be set by the win sci layer - * before the passthrough build is called - * - * - */ -struct scic_smp_passthru_request_callbacks { - /** - * Common callbacks for all Passthru requests - */ - struct scic_passthru_request_callbacks common_callbacks; - - /** - * Function pointer to get the length of the smp request and its length - */ - u32 (*scic_cb_smp_passthru_get_request)(void *, u8 **); - /** - * Function pointer to get the frame type of the smp request - */ - u8 (*scic_cb_smp_passthru_get_frame_type)(void *); - /** - * Function pointer to get the function in the the smp request - */ - u8 (*scic_cb_smp_passthru_get_function)(void *); - - /** - * Function pointer to get the "allocated response length" in the the smp request - */ - u8 (*scic_cb_smp_passthru_get_allocated_response_length)(void *); - -}; - -/** * This enumeration specifies the transport protocol utilized for the request. * * diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index cb4d2d6..a6c02d3 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -176,10 +176,6 @@ enum sci_status scic_sds_stp_pio_request_construct( u8 sat_protocol, bool copy_rx_frame); -enum sci_status scic_sds_stp_pio_request_construct_pass_through( - struct scic_sds_request *scic_io_request, - struct scic_stp_passthru_request_callbacks *passthru_cb); - enum sci_status scic_sds_stp_udma_request_construct( struct scic_sds_request *this_request, u32 transfer_length, -- cgit v0.10.2 From 524b5f723be8a1d966c1285d69810bc461f181c2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 31 Mar 2011 11:06:16 -0400 Subject: isci: simplify request state handlers Instead of filling up tables with default handlers call the default handler in the only caller. IMHO the whole state handlers concept is not very suitable for the isci request. For example there is a single real instance of the start handler, and we'd be much better off just having a check for the right state in the only caller, than all this mess. It's quite similar for the abort handler as well. Even the actual state machine has a lot of states that are rather pointless. The initial and constructed states are not needed at all as the request is not reachable for calls before it's fully set up and started. And the abort state should be replaced with an abort actions and a state transition to the completed state. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 7c21de0..191b5d0 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -874,67 +874,93 @@ u32 scic_io_request_get_number_of_bytes_transferred( * * SCIC SDS Interface Implementation * **************************************************************************** */ -/** - * - * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start - * operation is to be executed. - * - * This method invokes the base state start request handler for the - * SCIC_SDS_IO_REQUEST_T object. enum sci_status - */ enum sci_status scic_sds_request_start(struct scic_sds_request *request) { - if (request->device_sequence == + if (request->device_sequence != scic_sds_remote_device_get_sequence(request->target_device)) + return SCI_FAILURE; + + if (request->state_handlers->start_handler) return request->state_handlers->start_handler(request); - return SCI_FAILURE; + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request requested to start while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state(&request->state_machine)); + + return SCI_FAILURE_INVALID_STATE; } -/** - * - * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start - * operation is to be executed. - * - * This method invokes the base state terminate request handber for the - * SCIC_SDS_IO_REQUEST_T object. enum sci_status - */ enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *request) { - return request->state_handlers->abort_handler(request); + if (request->state_handlers->abort_handler) + return request->state_handlers->abort_handler(request); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request requested to abort while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state(&request->state_machine)); + + return SCI_FAILURE_INVALID_STATE; } -/** - * - * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start - * operation is to be executed. - * - * This method invokes the base state request completion handler for the - * SCIC_SDS_IO_REQUEST_T object. enum sci_status - */ enum sci_status scic_sds_io_request_complete(struct scic_sds_request *request) { - return request->state_handlers->complete_handler(request); + if (request->state_handlers->complete_handler) + return request->state_handlers->complete_handler(request); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request requested to complete while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state(&request->state_machine)); + + return SCI_FAILURE_INVALID_STATE; } -/** - * - * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start - * operation is to be executed. - * @event_code: The event code returned by the hardware for the task reqeust. - * - * This method invokes the core state handler for the SCIC_SDS_IO_REQUEST_T - * object. enum sci_status - */ enum sci_status scic_sds_io_request_event_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *request, u32 event_code) { - return this_request->state_handlers->event_handler(this_request, event_code); + if (request->state_handlers->event_handler) + return request->state_handlers->event_handler(request, event_code); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request given event code notification %x while " + "in wrong state %d\n", + __func__, + event_code, + sci_base_state_machine_get_state(&request->state_machine)); + + return SCI_FAILURE_INVALID_STATE; } +enum sci_status +scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code) +{ + if (request->state_machine.current_state_id == SCI_BASE_REQUEST_STATE_STARTED && + request->has_started_substate_machine == false) + return scic_sds_request_started_state_tc_completion_handler(request, completion_code); + else if (request->state_handlers->tc_completion_handler) + return request->state_handlers->tc_completion_handler(request, completion_code); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request given task completion notification %x " + "while in wrong state %d\n", + __func__, + completion_code, + sci_base_state_machine_get_state(&request->state_machine)); + + return SCI_FAILURE_INVALID_STATE; + +} + + /** * * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start @@ -946,10 +972,21 @@ enum sci_status scic_sds_io_request_event_handler( * SCIC_SDS_IO_REQUEST_T object. enum sci_status */ enum sci_status scic_sds_io_request_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *request, u32 frame_index) { - return this_request->state_handlers->frame_handler(this_request, frame_index); + if (request->state_handlers->frame_handler) + return request->state_handlers->frame_handler(request, frame_index); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request given unexpected frame %x while in " + "state %d\n", + __func__, + frame_index, + sci_base_state_machine_get_state(&request->state_machine)); + + scic_sds_controller_release_frame(request->owning_controller, frame_index); + return SCI_FAILURE_INVALID_STATE; } /** @@ -1003,141 +1040,6 @@ void scic_sds_io_request_copy_response(struct scic_sds_request *sds_request) /* * ***************************************************************************** - * * DEFAULT STATE HANDLERS - * ***************************************************************************** */ - -/* - * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_start() request. The default action is - * to log a warning and return a failure status. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_request_default_start_handler( - struct scic_sds_request *request) -{ - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to start while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_request_default_abort_handler( - struct scic_sds_request *request) -{ - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to abort while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/* - * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_complete() request. The default action - * is to log a warning and return a failure status. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_request_default_complete_handler( - struct scic_sds_request *request) -{ - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to complete while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/* - * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_complete() request. The default action - * is to log a warning and return a failure status. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_request_default_destruct_handler( - struct scic_sds_request *request) -{ - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to destroy while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_task_request_complete() request. The default - * action is to log a warning and return a failure status. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_request_default_tc_completion_handler( - struct scic_sds_request *request, - u32 completion_code) -{ - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given task completion notification %x " - "while in wrong state %d\n", - __func__, - completion_code, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; - -} - -/* - * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_event_handler() request. The default - * action is to log a warning and return a failure status. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_request_default_event_handler( - struct scic_sds_request *request, - u32 event_code) -{ - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given event code notification %x while " - "in wrong state %d\n", - __func__, - event_code, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/* - * This method is the default action to take when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_event_handler() request. The default - * action is to log a warning and return a failure status. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_request_default_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given unexpected frame %x while in " - "state %d\n", - __func__, - frame_index, - sci_base_state_machine_get_state(&request->state_machine)); - - scic_sds_controller_release_frame( - request->owning_controller, frame_index); - - return SCI_FAILURE_INVALID_STATE; -} - -/* - * ***************************************************************************** * * CONSTRUCTED STATE HANDLERS * ***************************************************************************** */ @@ -1601,58 +1503,25 @@ static enum sci_status scic_sds_request_aborting_state_frame_handler( static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { - .start_handler = scic_sds_request_default_start_handler, - .abort_handler = scic_sds_request_default_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, }, [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { .start_handler = scic_sds_request_constructed_state_start_handler, .abort_handler = scic_sds_request_constructed_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, }, [SCI_BASE_REQUEST_STATE_STARTED] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_request_started_state_frame_handler, }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { - .start_handler = scic_sds_request_default_start_handler, - .abort_handler = scic_sds_request_default_abort_handler, .complete_handler = scic_sds_request_completed_state_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, }, [SCI_BASE_REQUEST_STATE_ABORTING] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_aborting_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_request_aborting_state_frame_handler, }, [SCI_BASE_REQUEST_STATE_FINAL] = { - .start_handler = scic_sds_request_default_start_handler, - .abort_handler = scic_sds_request_default_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, }, }; diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 5b0f885..423567a 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -315,13 +315,6 @@ struct scic_sds_io_request_state_handler { */ scic_sds_io_request_handler_t complete_handler; - /** - * The destruct_handler specifies the method invoked when a user attempts to - * destruct a request. - */ - scic_sds_io_request_handler_t destruct_handler; - - scic_sds_io_request_task_completion_handler_t tc_completion_handler; scic_sds_io_request_event_handler_t event_handler; scic_sds_io_request_frame_handler_t frame_handler; @@ -394,24 +387,8 @@ extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substat ((a_request)->state_handlers->complete_handler(a_request)) - - -/** - * scic_sds_io_request_tc_completion() - - * - * This macro invokes the core state task completion handler for the - * struct scic_sds_io_request object. - */ -#define scic_sds_io_request_tc_completion(this_request, completion_code) \ -{ \ - if (this_request->state_machine.current_state_id \ - == SCI_BASE_REQUEST_STATE_STARTED \ - && this_request->has_started_substate_machine \ - == false) \ - scic_sds_request_started_state_tc_completion_handler(this_request, completion_code); \ - else \ - this_request->state_handlers->tc_completion_handler(this_request, completion_code); \ -} +extern enum sci_status +scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code); /** * SCU_SGL_ZERO() - @@ -494,33 +471,6 @@ enum sci_status scic_sds_task_request_terminate( /* * ***************************************************************************** - * * DEFAULT STATE HANDLERS - * ***************************************************************************** */ - -enum sci_status scic_sds_request_default_start_handler( - struct scic_sds_request *request); - - -enum sci_status scic_sds_request_default_complete_handler( - struct scic_sds_request *request); - -enum sci_status scic_sds_request_default_destruct_handler( - struct scic_sds_request *request); - -enum sci_status scic_sds_request_default_tc_completion_handler( - struct scic_sds_request *this_request, - u32 completion_code); - -enum sci_status scic_sds_request_default_event_handler( - struct scic_sds_request *this_request, - u32 event_code); - -enum sci_status scic_sds_request_default_frame_handler( - struct scic_sds_request *this_request, - u32 frame_index); - -/* - * ***************************************************************************** * * STARTED STATE HANDLERS * ***************************************************************************** */ diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 9293c2d..70bc8d2 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -525,22 +525,13 @@ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_ha static const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[] = { [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_smp_request_await_response_frame_handler, }, [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, } }; diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index 1eecb19..4d3a21b 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -180,21 +180,11 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[] = { [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, }, [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, } }; diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c index 2d551ad..25c68ce 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c @@ -671,49 +671,25 @@ enum sci_status scic_sds_stp_packet_request_started_completion_delay_complete_ha const struct scic_sds_io_request_state_handler scic_sds_stp_packet_request_started_substate_handler_table[] = { [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler .tc_completion_handler = scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler }, [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_handler }, [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler .tc_completion_handler = scic_sds_stp_packet_request_command_phase_await_tc_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_stp_packet_request_command_phase_await_tc_completion_frame_handler }, [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_request_default_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_stp_packet_request_command_phase_await_d2h_fis_frame_handler }, [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE] = { - .parent.start_handler = scic_sds_request_default_start_handler, .parent.abort_handler = scic_sds_request_started_state_abort_handler, .parent.complete_handler = scic_sds_stp_packet_request_started_completion_delay_complete_handler, - .parent.destruct_handler = scic_sds_request_default_destruct_handler - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler }, }; diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 6d0a178..0b3bc65 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -555,21 +555,11 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, } }; @@ -1212,40 +1202,21 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, } }; @@ -1510,21 +1481,12 @@ static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_stp_request_udma_general_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, }, }; @@ -1763,30 +1725,15 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, - .frame_handler = scic_sds_request_default_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .start_handler = scic_sds_request_default_start_handler, .abort_handler = scic_sds_request_started_state_abort_handler, - .complete_handler = scic_sds_request_default_complete_handler, - .destruct_handler = scic_sds_request_default_destruct_handler, - .tc_completion_handler = scic_sds_request_default_tc_completion_handler, - .event_handler = scic_sds_request_default_event_handler, .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, }, }; -- cgit v0.10.2 From bc5c96748a5f2067193faa8131b2aa5f9775d309 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 2 Apr 2011 08:15:04 -0400 Subject: isci: simplify dma coherent allocation Remove the insane infrastructure for preallocating coheren DMA regions, and just allocate the memory where needed. This also gets rid of the aligment adjustments given that Documentation/DMA-API-HOWTO.txt sais: "The cpu return address and the DMA bus master address are both guaranteed to be aligned to the smallest PAGE_SIZE order which is greater than or equal to the requested size. This invariant exists (for example) to guarantee that if you allocate a chunk which is smaller than or equal to 64 kilobytes, the extent of the buffer you receive will not cross a 64K boundary." Signed-off-by: Christoph Hellwig [djbw: moved allocation from start to init, re-add memset] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index a65c0ae..522e7a7 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -25,6 +25,5 @@ isci-objs := init.o phy.o request.o sata.o \ core/scic_sds_smp_remote_device.o \ core/scic_sds_remote_node_table.o \ core/scic_sds_unsolicited_frame_control.o \ - core/sci_base_memory_descriptor_list.o \ core/sci_base_state_machine.o \ core/sci_util.o diff --git a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c deleted file mode 100644 index 2d785b5..0000000 --- a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains the base implementation for the memory descriptor list. - * This is currently comprised of MDL iterator methods. - * - * - */ - -#include "sci_environment.h" -#include "sci_base_memory_descriptor_list.h" - -/* - * ****************************************************************************** - * * P U B L I C M E T H O D S - * ****************************************************************************** */ - -void sci_mdl_first_entry( - struct sci_base_memory_descriptor_list *base_mdl) -{ - base_mdl->next_index = 0; - - /* - * If this MDL is managing another MDL, then recursively rewind that MDL - * object as well. */ - if (base_mdl->next_mdl != NULL) - sci_mdl_first_entry(base_mdl->next_mdl); -} - - -void sci_mdl_next_entry( - struct sci_base_memory_descriptor_list *base_mdl) -{ - /* - * If there is at least one more entry left in the array, then change - * the next pointer to it. */ - if (base_mdl->next_index < base_mdl->length) - base_mdl->next_index++; - else if (base_mdl->next_index == base_mdl->length) { - /* - * This MDL has exhausted it's set of entries. If this MDL is managing - * another MDL, then start iterating through that MDL. */ - if (base_mdl->next_mdl != NULL) - sci_mdl_next_entry(base_mdl->next_mdl); - } -} - - -struct sci_physical_memory_descriptor *sci_mdl_get_current_entry( - struct sci_base_memory_descriptor_list *base_mdl) -{ - if (base_mdl->next_index < base_mdl->length) - return &base_mdl->mde_array[base_mdl->next_index]; - else if (base_mdl->next_index == base_mdl->length) { - /* - * This MDL has exhausted it's set of entries. If this MDL is managing - * another MDL, then return it's current entry. */ - if (base_mdl->next_mdl != NULL) - return sci_mdl_get_current_entry(base_mdl->next_mdl); - } - - return NULL; -} - -/* - * ****************************************************************************** - * * P R O T E C T E D M E T H O D S - * ****************************************************************************** */ - -void sci_base_mdl_construct( - struct sci_base_memory_descriptor_list *mdl, - struct sci_physical_memory_descriptor *mde_array, - u32 mde_array_length, - struct sci_base_memory_descriptor_list *next_mdl) -{ - mdl->length = mde_array_length; - mdl->mde_array = mde_array; - mdl->next_index = 0; - mdl->next_mdl = next_mdl; -} - -/* --------------------------------------------------------------------------- */ - -bool sci_base_mde_is_valid( - struct sci_physical_memory_descriptor *mde, - u32 alignment, - u32 size, - u16 attributes) -{ - /* Only need the lower 32 bits to ensure alignment is met. */ - u32 physical_address = lower_32_bits(mde->physical_address); - - if ( - ((((unsigned long)mde->virtual_address) & (alignment - 1)) != 0) - || ((physical_address & (alignment - 1)) != 0) - || (mde->constant_memory_alignment != alignment) - || (mde->constant_memory_size != size) - || (mde->virtual_address == NULL) - || (mde->constant_memory_attributes != attributes) - ) { - return false; - } - - return true; -} - diff --git a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h b/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h deleted file mode 100644 index b58d4e8..0000000 --- a/drivers/scsi/isci/core/sci_base_memory_descriptor_list.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_MEMORY_DESCRIPTOR_LIST_H_ -#define _SCI_BASE_MEMORY_DESCRIPTOR_LIST_H_ - -/** - * This file contains the protected interface structures, constants and - * interface methods for the struct sci_base_memory_descriptor_list object. - * - * - */ - - -#include "sci_memory_descriptor_list.h" - - -/** - * struct sci_base_memory_descriptor_list - This structure contains all of the - * fields necessary to implement a simple stack for managing the list of - * available controller indices. - * - * - */ -struct sci_base_memory_descriptor_list { - /** - * This field indicates the length of the memory descriptor entry array. - */ - u32 length; - - /** - * This field is utilized to provide iterator pattern functionality. - * It indicates the index of the next memory descriptor in the iteration. - */ - u32 next_index; - - /** - * This field will point to the list of memory descriptors. - */ - struct sci_physical_memory_descriptor *mde_array; - - /** - * This field simply allows a user to chain memory descriptor lists - * together if desired. This field will be initialized to NULL. - */ - struct sci_base_memory_descriptor_list *next_mdl; - -}; - -/** - * sci_base_mdl_construct() - This method is invoked to construct an memory - * descriptor list. It initializes the fields of the MDL. - * @mdl: This parameter specifies the memory descriptor list to be constructed. - * @mde_array: This parameter specifies the array of memory descriptor entries - * to be managed by this list. - * @mde_array_length: This parameter specifies the size of the array of entries. - * @next_mdl: This parameter specifies a subsequent MDL object to be managed by - * this MDL object. - * - * none. - */ -void sci_base_mdl_construct( - struct sci_base_memory_descriptor_list *mdl, - struct sci_physical_memory_descriptor *mde_array, - u32 mde_array_length, - struct sci_base_memory_descriptor_list *next_mdl); - -/** - * sci_base_mde_construct() - - * - * This macro constructs an memory descriptor entry with the given alignment - * and size - */ -#define sci_base_mde_construct(mde, alignment, size, attributes) \ - { \ - (mde)->constant_memory_alignment = (alignment); \ - (mde)->constant_memory_size = (size); \ - (mde)->constant_memory_attributes = (attributes); \ - } - -/** - * sci_base_mde_is_valid() - This method validates that the memory descriptor - * is correctly filled out by the SCI User - * @mde: This parameter is the mde entry to validate - * @alignment: This parameter specifies the expected alignment of the memory - * for the mde. - * @size: This parameter specifies the memory size expected for the mde its - * value should not have been changed by the SCI User. - * @attributes: This parameter specifies the attributes for the memory - * descriptor provided. - * - * bool This method returns an indication as to whether the supplied MDE is - * valid or not. true The MDE is valid. false The MDE is not valid. - */ -bool sci_base_mde_is_valid( - struct sci_physical_memory_descriptor *mde, - u32 alignment, - u32 size, - u16 attributes); - -#endif /* _SCI_BASE_MEMORY_DESCRIPTOR_LIST_H_ */ diff --git a/drivers/scsi/isci/core/sci_memory_descriptor_list.h b/drivers/scsi/isci/core/sci_memory_descriptor_list.h deleted file mode 100644 index a039998..0000000 --- a/drivers/scsi/isci/core/sci_memory_descriptor_list.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_MEMORY_DESCRIPTOR_LIST_H_ -#define _SCI_MEMORY_DESCRIPTOR_LIST_H_ - -/** - * This file contains all of the basic data types utilized by an SCI user or - * implementor. - * - * - */ - - - -struct sci_base_memory_descriptor_list; - -/** - * - * - * SCI_MDE_ATTRIBUTES These constants depict memory attributes for the Memory - * Descriptor Entries (MDEs) contained in the MDL. - */ -#define SCI_MDE_ATTRIBUTE_CACHEABLE 0x0001 -#define SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS 0x0002 - -/** - * struct sci_physical_memory_descriptor - This structure defines a description - * of a memory location for the SCI implementation. - * - * - */ -struct sci_physical_memory_descriptor { - /** - * This field contains the virtual address associated with this descriptor - * element. This field shall be zero when the descriptor is retrieved from - * the SCI implementation. The user shall set this field prior - * sci_controller_start() - */ - void *virtual_address; - - /** - * This field contains the physical address associated with this desciptor - * element. This field shall be zero when the descriptor is retrieved from - * the SCI implementation. The user shall set this field prior - * sci_controller_start() - */ - dma_addr_t physical_address; - - /** - * This field contains the size requirement for this memory descriptor. - * A value of zero for this field indicates the end of the descriptor - * list. The value should be treated as read only for an SCI user. - */ - u32 constant_memory_size; - - /** - * This field contains the alignment requirement for this memory - * descriptor. A value of zero for this field indicates the end of the - * descriptor list. All other values indicate the number of bytes to - * achieve the necessary alignment. The value should be treated as - * read only for an SCI user. - */ - u32 constant_memory_alignment; - - /** - * This field contains an indication regarding the desired memory - * attributes for this memory descriptor entry. - * Notes: - * - If the cacheable attribute is set, the user can allocate - * memory that is backed by cache for better performance. It - * is not required that the memory be backed by cache. - * - If the physically contiguous attribute is set, then the - * entire memory must be physically contiguous across all - * page boundaries. - */ - u16 constant_memory_attributes; - -}; - -/** - * sci_mdl_first_entry() - This method simply rewinds the MDL iterator back to - * the first memory descriptor entry in the list. - * @mdl: This parameter specifies the memory descriptor list that is to be - * rewound. - * - */ -void sci_mdl_first_entry( - struct sci_base_memory_descriptor_list *mdl); - -/** - * sci_mdl_next_entry() - This method simply updates the "current" pointer to - * the next sequential memory descriptor. - * @mdl: This parameter specifies the memory descriptor list for which to - * return the next memory descriptor entry in the list. - * - * none. - */ -void sci_mdl_next_entry( - struct sci_base_memory_descriptor_list *mdl); - -/** - * sci_mdl_get_current_entry() - This method simply returns the current memory - * descriptor entry. - * @mdl: This parameter specifies the memory descriptor list for which to - * return the current memory descriptor entry. - * - * This method returns a pointer to the current physical memory descriptor in - * the MDL. NULL This value is returned if there are no descriptors in the list. - */ -struct sci_physical_memory_descriptor *sci_mdl_get_current_entry( - struct sci_base_memory_descriptor_list *mdl); - - -#endif /* _SCI_MEMORY_DESCRIPTOR_LIST_H_ */ - diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h index 236c583..649b61a 100644 --- a/drivers/scsi/isci/core/scic_controller.h +++ b/drivers/scsi/isci/core/scic_controller.h @@ -144,4 +144,5 @@ enum sci_status scic_controller_free_io_tag( struct device; struct scic_sds_controller *scic_controller_alloc(struct device *dev); +int scic_controller_mem_init(struct scic_sds_controller *scic); #endif /* _SCIC_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 7ead6f3..4aae7b6 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -226,171 +226,66 @@ static void scic_sds_controller_initialize_power_control(struct scic_sds_control scic->power_control.phys_granted_power = 0; } -#define SCU_REMOTE_NODE_CONTEXT_ALIGNMENT (32) -#define SCU_TASK_CONTEXT_ALIGNMENT (256) -#define SCU_UNSOLICITED_FRAME_ADDRESS_ALIGNMENT (64) -#define SCU_UNSOLICITED_FRAME_BUFFER_ALIGNMENT (1024) -#define SCU_UNSOLICITED_FRAME_HEADER_ALIGNMENT (64) - -/** - * This method builds the memory descriptor table for this controller. - * @this_controller: This parameter specifies the controller object for which - * to build the memory table. - * - */ -static void scic_sds_controller_build_memory_descriptor_table( - struct scic_sds_controller *this_controller) +int scic_controller_mem_init(struct scic_sds_controller *scic) { - sci_base_mde_construct( - &this_controller->memory_descriptors[SCU_MDE_COMPLETION_QUEUE], - SCU_COMPLETION_RAM_ALIGNMENT, - (sizeof(u32) * this_controller->completion_queue_entries), - (SCI_MDE_ATTRIBUTE_CACHEABLE | SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS) - ); - - sci_base_mde_construct( - &this_controller->memory_descriptors[SCU_MDE_REMOTE_NODE_CONTEXT], - SCU_REMOTE_NODE_CONTEXT_ALIGNMENT, - this_controller->remote_node_entries * sizeof(union scu_remote_node_context), - SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS - ); - - sci_base_mde_construct( - &this_controller->memory_descriptors[SCU_MDE_TASK_CONTEXT], - SCU_TASK_CONTEXT_ALIGNMENT, - this_controller->task_context_entries * sizeof(struct scu_task_context), - SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS - ); - - /* - * The UF buffer address table size must be programmed to a power - * of 2. Find the first power of 2 that is equal to or greater then - * the number of unsolicited frame buffers to be utilized. */ - scic_sds_unsolicited_frame_control_set_address_table_count( - &this_controller->uf_control - ); - - sci_base_mde_construct( - &this_controller->memory_descriptors[SCU_MDE_UF_BUFFER], - SCU_UNSOLICITED_FRAME_BUFFER_ALIGNMENT, - scic_sds_unsolicited_frame_control_get_mde_size(this_controller->uf_control), - SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS - ); -} - -/** - * This method validates the driver supplied memory descriptor table. - * @this_controller: - * - * enum sci_status - */ -static enum sci_status scic_sds_controller_validate_memory_descriptor_table( - struct scic_sds_controller *this_controller) -{ - bool mde_list_valid; - - mde_list_valid = sci_base_mde_is_valid( - &this_controller->memory_descriptors[SCU_MDE_COMPLETION_QUEUE], - SCU_COMPLETION_RAM_ALIGNMENT, - (sizeof(u32) * this_controller->completion_queue_entries), - (SCI_MDE_ATTRIBUTE_CACHEABLE | SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS) - ); - - if (mde_list_valid == false) - return SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD; - - mde_list_valid = sci_base_mde_is_valid( - &this_controller->memory_descriptors[SCU_MDE_REMOTE_NODE_CONTEXT], - SCU_REMOTE_NODE_CONTEXT_ALIGNMENT, - this_controller->remote_node_entries * sizeof(union scu_remote_node_context), - SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS - ); - - if (mde_list_valid == false) - return SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD; - - mde_list_valid = sci_base_mde_is_valid( - &this_controller->memory_descriptors[SCU_MDE_TASK_CONTEXT], - SCU_TASK_CONTEXT_ALIGNMENT, - this_controller->task_context_entries * sizeof(struct scu_task_context), - SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS - ); - - if (mde_list_valid == false) - return SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD; - - mde_list_valid = sci_base_mde_is_valid( - &this_controller->memory_descriptors[SCU_MDE_UF_BUFFER], - SCU_UNSOLICITED_FRAME_BUFFER_ALIGNMENT, - scic_sds_unsolicited_frame_control_get_mde_size(this_controller->uf_control), - SCI_MDE_ATTRIBUTE_PHYSICALLY_CONTIGUOUS - ); - - if (mde_list_valid == false) - return SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD; - - return SCI_SUCCESS; -} - -/** - * This method initializes the controller with the physical memory addresses - * that are used to communicate with the driver. - * @this_controller: - * - */ -static void scic_sds_controller_ram_initialization( - struct scic_sds_controller *this_controller) -{ - struct sci_physical_memory_descriptor *mde; + struct device *dev = scic_to_dev(scic); + dma_addr_t dma_handle; + enum sci_status result; - /* - * The completion queue is actually placed in cacheable memory - * Therefore it no longer comes out of memory in the MDL. */ - mde = &this_controller->memory_descriptors[SCU_MDE_COMPLETION_QUEUE]; - this_controller->completion_queue = (u32 *)mde->virtual_address; - writel(lower_32_bits(mde->physical_address), \ - &this_controller->smu_registers->completion_queue_lower); - writel(upper_32_bits(mde->physical_address), - &this_controller->smu_registers->completion_queue_upper); - - /* - * Program the location of the Remote Node Context table - * into the SCU. */ - mde = &this_controller->memory_descriptors[SCU_MDE_REMOTE_NODE_CONTEXT]; - this_controller->remote_node_context_table = (union scu_remote_node_context *) - mde->virtual_address; - writel(lower_32_bits(mde->physical_address), - &this_controller->smu_registers->remote_node_context_lower); - writel(upper_32_bits(mde->physical_address), - &this_controller->smu_registers->remote_node_context_upper); - - /* Program the location of the Task Context table into the SCU. */ - mde = &this_controller->memory_descriptors[SCU_MDE_TASK_CONTEXT]; - this_controller->task_context_table = (struct scu_task_context *) - mde->virtual_address; - writel(lower_32_bits(mde->physical_address), - &this_controller->smu_registers->host_task_table_lower); - writel(upper_32_bits(mde->physical_address), - &this_controller->smu_registers->host_task_table_upper); - - mde = &this_controller->memory_descriptors[SCU_MDE_UF_BUFFER]; - scic_sds_unsolicited_frame_control_construct( - &this_controller->uf_control, mde, this_controller - ); + scic->completion_queue = dmam_alloc_coherent(dev, + scic->completion_queue_entries * sizeof(u32), + &dma_handle, GFP_KERNEL); + if (!scic->completion_queue) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->completion_queue_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->completion_queue_upper); + + scic->remote_node_context_table = dmam_alloc_coherent(dev, + scic->remote_node_entries * + sizeof(union scu_remote_node_context), + &dma_handle, GFP_KERNEL); + if (!scic->remote_node_context_table) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->remote_node_context_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->remote_node_context_upper); + + scic->task_context_table = dmam_alloc_coherent(dev, + scic->task_context_entries * + sizeof(struct scu_task_context), + &dma_handle, GFP_KERNEL); + if (!scic->task_context_table) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->host_task_table_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->host_task_table_upper); + + result = scic_sds_unsolicited_frame_control_construct(scic); + if (result) + return result; /* * Inform the silicon as to the location of the UF headers and * address table. */ - writel(lower_32_bits(this_controller->uf_control.headers.physical_address), - &this_controller->scu_registers->sdma.uf_header_base_address_lower); - writel(upper_32_bits(this_controller->uf_control.headers.physical_address), - &this_controller->scu_registers->sdma.uf_header_base_address_upper); + writel(lower_32_bits(scic->uf_control.headers.physical_address), + &scic->scu_registers->sdma.uf_header_base_address_lower); + writel(upper_32_bits(scic->uf_control.headers.physical_address), + &scic->scu_registers->sdma.uf_header_base_address_upper); + + writel(lower_32_bits(scic->uf_control.address_table.physical_address), + &scic->scu_registers->sdma.uf_address_table_lower); + writel(upper_32_bits(scic->uf_control.address_table.physical_address), + &scic->scu_registers->sdma.uf_address_table_upper); - writel(lower_32_bits(this_controller->uf_control.address_table.physical_address), - &this_controller->scu_registers->sdma.uf_address_table_lower); - writel(upper_32_bits(this_controller->uf_control.address_table.physical_address), - &this_controller->scu_registers->sdma.uf_address_table_upper); + return 0; } /** @@ -2525,7 +2420,6 @@ static enum sci_status scic_controller_set_mode( scic->completion_event_entries = SCU_EVENT_COUNT; scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; - scic_sds_controller_build_memory_descriptor_table(scic); break; case SCI_MODE_SIZE: @@ -2536,7 +2430,6 @@ static enum sci_status scic_controller_set_mode( scic->completion_event_entries = SCU_MIN_EVENTS; scic->completion_queue_entries = SCU_MIN_COMPLETION_QUEUE_ENTRIES; - scic_sds_controller_build_memory_descriptor_table(scic); break; default: @@ -3040,72 +2933,52 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( u16 index; enum sci_status result; - /* - * Make sure that the SCI User filled in the memory descriptor - * table correctly - */ - result = scic_sds_controller_validate_memory_descriptor_table(scic); - - if (result == SCI_SUCCESS) { - /* - * The memory descriptor list looks good so program the - * hardware - */ - scic_sds_controller_ram_initialization(scic); - } - - if (result == SCI_SUCCESS) { - /* Build the TCi free pool */ - sci_pool_initialize(scic->tci_pool); - for (index = 0; index < scic->task_context_entries; index++) - sci_pool_put(scic->tci_pool, index); + /* Build the TCi free pool */ + sci_pool_initialize(scic->tci_pool); + for (index = 0; index < scic->task_context_entries; index++) + sci_pool_put(scic->tci_pool, index); - /* Build the RNi free pool */ - scic_sds_remote_node_table_initialize( - &scic->available_remote_nodes, - scic->remote_node_entries); - } + /* Build the RNi free pool */ + scic_sds_remote_node_table_initialize( + &scic->available_remote_nodes, + scic->remote_node_entries); - if (result == SCI_SUCCESS) { - /* - * Before anything else lets make sure we will not be - * interrupted by the hardware. - */ - scic_controller_disable_interrupts(scic); + /* + * Before anything else lets make sure we will not be + * interrupted by the hardware. + */ + scic_controller_disable_interrupts(scic); - /* Enable the port task scheduler */ - scic_sds_controller_enable_port_task_scheduler(scic); + /* Enable the port task scheduler */ + scic_sds_controller_enable_port_task_scheduler(scic); - /* Assign all the task entries to scic physical function */ - scic_sds_controller_assign_task_entries(scic); + /* Assign all the task entries to scic physical function */ + scic_sds_controller_assign_task_entries(scic); - /* Now initialze the completion queue */ - scic_sds_controller_initialize_completion_queue(scic); + /* Now initialze the completion queue */ + scic_sds_controller_initialize_completion_queue(scic); - /* Initialize the unsolicited frame queue for use */ - scic_sds_controller_initialize_unsolicited_frame_queue(scic); - } + /* Initialize the unsolicited frame queue for use */ + scic_sds_controller_initialize_unsolicited_frame_queue(scic); /* Start all of the ports on this controller */ - for (index = 0; - (index < scic->logical_port_entries) && (result == SCI_SUCCESS); - index++) { + for (index = 0; index < scic->logical_port_entries; index++) { struct scic_sds_port *sci_port = &scic->port_table[index]; result = sci_port->state_handlers->parent.start_handler( &sci_port->parent); + if (result) + return result; } - if (result == SCI_SUCCESS) { - scic_sds_controller_start_next_phy(scic); + scic_sds_controller_start_next_phy(scic); - isci_timer_start(scic->timeout_timer, timeout); + isci_timer_start(scic->timeout_timer, timeout); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STARTING); - } + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STARTING); - return result; + return SCI_SUCCESS; } /* @@ -3658,8 +3531,6 @@ enum sci_status scic_controller_construct(struct scic_sds_controller *scic, &scic->parent, scic_sds_controller_state_table, SCI_BASE_CONTROLLER_STATE_INITIAL); - sci_base_mdl_construct(&scic->mdl, scic->memory_descriptors, - ARRAY_SIZE(scic->memory_descriptors), NULL); sci_base_state_machine_start(&scic->state_machine); scic->scu_registers = scu_base; diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 5cff806..163a9e1 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -68,10 +68,8 @@ #include "sci_pool.h" #include "sci_controller_constants.h" -#include "sci_memory_descriptor_list.h" #include "sci_base_state.h" #include "sci_base_state_machine.h" -#include "sci_base_memory_descriptor_list.h" #include "scic_config_parameters.h" #include "scic_sds_port.h" #include "scic_sds_phy.h" @@ -89,40 +87,6 @@ struct scic_sds_remote_device; struct scic_sds_request; struct scic_sds_controller; -#define SCU_COMPLETION_RAM_ALIGNMENT (64) - -/** - * enum scic_sds_controller_memory_descriptors - - * - * This enumeration depects the types of MDEs that are going to be created for - * the controller object. - */ -enum scic_sds_controller_memory_descriptors { - /** - * Completion queue MDE entry - */ - SCU_MDE_COMPLETION_QUEUE, - - /** - * Remote node context MDE entry - */ - SCU_MDE_REMOTE_NODE_CONTEXT, - - /** - * Task context MDE entry - */ - SCU_MDE_TASK_CONTEXT, - - /** - * Unsolicited frame buffer MDE entrys this is the start of the unsolicited - * frame buffer entries. - */ - SCU_MDE_UF_BUFFER, - - SCU_MAX_MDES -}; - - /** * struct scic_power_control - * @@ -174,13 +138,6 @@ struct scic_sds_controller { struct sci_base_object parent; /** - * This field points to the memory descriptor list associated with this - * controller. The MDL indicates the memory requirements necessary for - * this controller object. - */ - struct sci_base_memory_descriptor_list mdl; - - /** * This field contains the information for the base controller state * machine. */ @@ -285,12 +242,6 @@ struct scic_sds_controller { union scu_remote_node_context *remote_node_context_table; /** - * This field is the array of physical memory requiremets for this controller - * object. - */ - struct sci_physical_memory_descriptor memory_descriptors[SCU_MAX_MDES]; - - /** * This field is a pointer to the completion queue. This memory is * written to by the hardware and read by the software. */ diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c index 31a3516..9e393e5 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c @@ -68,26 +68,6 @@ #include "sci_environment.h" /** - * The UF buffer address table size must be programmed to a power of 2. Find - * the first power of 2 that is equal to or greater then the number of - * unsolicited frame buffers to be utilized. - * @uf_control: This parameter specifies the UF control object for which to - * update the address table count. - * - */ -void scic_sds_unsolicited_frame_control_set_address_table_count( - struct scic_sds_unsolicited_frame_control *uf_control) -{ - uf_control->address_table.count = SCU_MIN_UF_TABLE_ENTRIES; - while ( - (uf_control->address_table.count < uf_control->buffers.count) - && (uf_control->address_table.count < SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES) - ) { - uf_control->address_table.count <<= 1; - } -} - -/** * This method will program the unsolicited frames (UFs) into the UF address * table and construct the UF frame structure being modeled in the core. It * will handle the case where some of the UFs are not being used and thus @@ -155,23 +135,9 @@ static void scic_sds_unsolicited_frame_control_construct_frames( } } -/** - * This method constructs the various members of the unsolicted frame control - * object (buffers, headers, address, table, etc). - * @uf_control: This parameter specifies the unsolicited frame control object - * to construct. - * @mde: This parameter specifies the memory descriptor from which to derive - * all of the address information needed to get the unsolicited frame - * functionality working. - * @controller: This parameter specifies the controller object associated with - * the uf_control being constructed. - * - */ -void scic_sds_unsolicited_frame_control_construct( - struct scic_sds_unsolicited_frame_control *uf_control, - struct sci_physical_memory_descriptor *mde, - struct scic_sds_controller *controller) +int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic) { + struct scic_sds_unsolicited_frame_control *uf_control = &scic->uf_control; u32 unused_uf_header_entries; u32 used_uf_header_entries; u32 used_uf_buffer_bytes; @@ -179,10 +145,22 @@ void scic_sds_unsolicited_frame_control_construct( u32 used_uf_header_bytes; dma_addr_t uf_buffer_phys_address; void *uf_buffer_virt_address; + size_t size; + + /* + * The UF buffer address table size must be programmed to a power + * of 2. Find the first power of 2 that is equal to or greater then + * the number of unsolicited frame buffers to be utilized. + */ + uf_control->address_table.count = SCU_MIN_UF_TABLE_ENTRIES; + while (uf_control->address_table.count < uf_control->buffers.count && + uf_control->address_table.count < SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES) + uf_control->address_table.count <<= 1; /* * Prepare all of the memory sizes for the UF headers, UF address - * table, and UF buffers themselves. */ + * table, and UF buffers themselves. + */ used_uf_buffer_bytes = uf_control->buffers.count * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; unused_uf_header_entries = uf_control->address_table.count @@ -193,13 +171,19 @@ void scic_sds_unsolicited_frame_control_construct( used_uf_header_bytes = used_uf_header_entries * sizeof(struct scu_unsolicited_frame_header); + size = used_uf_buffer_bytes + used_uf_header_bytes + + uf_control->address_table.count * sizeof(dma_addr_t); + + /* * The Unsolicited Frame buffers are set at the start of the UF * memory descriptor entry. The headers and address table will be * placed after the buffers. */ - uf_buffer_phys_address = mde->physical_address; - uf_buffer_virt_address = mde->virtual_address; + uf_buffer_virt_address = dmam_alloc_coherent(scic_to_dev(scic), size, + &uf_buffer_phys_address, GFP_KERNEL); + if (!uf_buffer_virt_address) + return -ENOMEM; /* * Program the location of the UF header table into the SCU. @@ -254,10 +238,12 @@ void scic_sds_unsolicited_frame_control_construct( scic_sds_unsolicited_frame_control_construct_frames( uf_control, uf_buffer_phys_address, - mde->virtual_address, + uf_buffer_virt_address, unused_uf_header_entries, used_uf_header_entries ); + + return 0; } /** diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h index a0204aa..4eb244c 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h @@ -64,7 +64,6 @@ #define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ #include "scu_unsolicited_frame.h" -#include "sci_memory_descriptor_list.h" #include "scu_constants.h" #include "sci_status.h" @@ -248,14 +247,9 @@ struct scic_sds_unsolicited_frame_control { }; -void scic_sds_unsolicited_frame_control_set_address_table_count( - struct scic_sds_unsolicited_frame_control *uf_control); - struct scic_sds_controller; -void scic_sds_unsolicited_frame_control_construct( - struct scic_sds_unsolicited_frame_control *uf_control, - struct sci_physical_memory_descriptor *mde, - struct scic_sds_controller *this_controller); + +int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic); enum sci_status scic_sds_unsolicited_frame_control_get_header( struct scic_sds_unsolicited_frame_control *uf_control, @@ -271,16 +265,4 @@ bool scic_sds_unsolicited_frame_control_release_frame( struct scic_sds_unsolicited_frame_control *uf_control, u32 frame_index); -/** - * scic_sds_unsolicited_frame_control_get_mde_size() - - * - * This macro simply calculates the size of the memory descriptor entry that - * relates to unsolicited frames and the surrounding silicon memory required to - * utilize it. - */ -#define scic_sds_unsolicited_frame_control_get_mde_size(uf_control) \ - (((uf_control).buffers.count * SCU_UNSOLICITED_FRAME_BUFFER_SIZE) \ - + ((uf_control).address_table.count * sizeof(dma_addr_t)) \ - + ((uf_control).buffers.count * sizeof(struct scu_unsolicited_frame_header))) - #endif /* _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ */ diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index adfc245..927f088 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -170,96 +170,6 @@ void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion wake_up(&ihost->eventq); } -static struct coherent_memory_info *isci_host_alloc_mdl_struct( - struct isci_host *isci_host, - u32 size) -{ - struct coherent_memory_info *mdl_struct; - void *uncached_address = NULL; - - - mdl_struct = devm_kzalloc(&isci_host->pdev->dev, - sizeof(*mdl_struct), - GFP_KERNEL); - if (!mdl_struct) - return NULL; - - INIT_LIST_HEAD(&mdl_struct->node); - - uncached_address = dmam_alloc_coherent(&isci_host->pdev->dev, - size, - &mdl_struct->dma_handle, - GFP_KERNEL); - if (!uncached_address) - return NULL; - - /* memset the whole memory area. */ - memset((char *)uncached_address, 0, size); - mdl_struct->vaddr = uncached_address; - mdl_struct->size = (size_t)size; - - return mdl_struct; -} - -static void isci_host_build_mde( - struct sci_physical_memory_descriptor *mde_struct, - struct coherent_memory_info *mdl_struct) -{ - unsigned long address = 0; - dma_addr_t dma_addr = 0; - - address = (unsigned long)mdl_struct->vaddr; - dma_addr = mdl_struct->dma_handle; - - /* to satisfy the alignment. */ - if ((address % mde_struct->constant_memory_alignment) != 0) { - int align_offset - = (mde_struct->constant_memory_alignment - - (address % mde_struct->constant_memory_alignment)); - address += align_offset; - dma_addr += align_offset; - } - - mde_struct->virtual_address = (void *)address; - mde_struct->physical_address = dma_addr; - mdl_struct->mde = mde_struct; -} - -static int isci_host_mdl_allocate_coherent( - struct isci_host *isci_host) -{ - struct sci_physical_memory_descriptor *current_mde; - struct coherent_memory_info *mdl_struct; - u32 size = 0; - - struct sci_base_memory_descriptor_list *mdl_handle = - &isci_host->core_controller->mdl; - - sci_mdl_first_entry(mdl_handle); - - current_mde = sci_mdl_get_current_entry(mdl_handle); - - while (current_mde != NULL) { - - size = (current_mde->constant_memory_size - + current_mde->constant_memory_alignment); - - mdl_struct = isci_host_alloc_mdl_struct(isci_host, size); - if (!mdl_struct) - return -ENOMEM; - - list_add_tail(&mdl_struct->node, &isci_host->mdl_struct_list); - - isci_host_build_mde(current_mde, mdl_struct); - - sci_mdl_next_entry(mdl_handle); - current_mde = sci_mdl_get_current_entry(mdl_handle); - } - - return 0; -} - - /** * isci_host_completion_routine() - This function is the delayed service * routine that calls the sci core library's completion handler. It's @@ -523,8 +433,6 @@ int isci_host_init(struct isci_host *isci_host) tasklet_init(&isci_host->completion_tasklet, isci_host_completion_routine, (unsigned long)isci_host); - INIT_LIST_HEAD(&(isci_host->mdl_struct_list)); - INIT_LIST_HEAD(&isci_host->requests_to_complete); INIT_LIST_HEAD(&isci_host->requests_to_errorback); @@ -539,8 +447,7 @@ int isci_host_init(struct isci_host *isci_host) return -ENODEV; } - /* populate mdl with dma memory. scu_mdl_allocate_coherent() */ - err = isci_host_mdl_allocate_coherent(isci_host); + err = scic_controller_mem_init(isci_host->core_controller); if (err) return err; diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 8372094..6e66074 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -75,14 +75,6 @@ #define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ #define SCIC_CONTROLLER_STOP_TIMEOUT 5000 -struct coherent_memory_info { - struct list_head node; - dma_addr_t dma_handle; - void *vaddr; - size_t size; - struct sci_physical_memory_descriptor *mde; -}; - struct isci_host { struct scic_sds_controller *core_controller; union scic_oem_parameters oem_parameters; @@ -114,7 +106,6 @@ struct isci_host { wait_queue_head_t eventq; struct Scsi_Host *shost; struct tasklet_struct completion_tasklet; - struct list_head mdl_struct_list; struct list_head requests_to_complete; struct list_head requests_to_errorback; spinlock_t scic_lock; -- cgit v0.10.2 From c629582d0dea42d8b3617f8c46ea2770b95e23aa Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 2 Apr 2011 08:15:20 -0400 Subject: isci: remove scic_controller state handlers Remove the state handler indirections for the scic_controller, and replace them with procedural calls that check for the correct state first. Signed-off-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h index 649b61a..23a2c78 100644 --- a/drivers/scsi/isci/core/scic_controller.h +++ b/drivers/scsi/isci/core/scic_controller.h @@ -110,11 +110,6 @@ enum sci_task_status scic_controller_start_task( struct scic_sds_request *task_request, u16 io_tag); -enum sci_status scic_controller_complete_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *task_request); - enum sci_status scic_controller_terminate_request( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 4aae7b6..f16a23a 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1453,46 +1453,45 @@ void scic_sds_controller_error_handler(struct scic_sds_controller *scic) -void scic_sds_controller_link_up( - struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - scic_sds_controller_phy_handler_t link_up; - u32 state; - - state = scic->state_machine.current_state_id; - link_up = scic_sds_controller_state_handler_table[state].link_up; - - if (link_up) - link_up(scic, sci_port, sci_phy); - else +void scic_sds_controller_link_up(struct scic_sds_controller *scic, + struct scic_sds_port *port, struct scic_sds_phy *phy) +{ + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STARTING: + scic_sds_controller_phy_timer_stop(scic); + scic->port_agent.link_up_handler(scic, &scic->port_agent, + port, phy); + scic_sds_controller_start_next_phy(scic); + break; + case SCI_BASE_CONTROLLER_STATE_READY: + scic->port_agent.link_up_handler(scic, &scic->port_agent, + port, phy); + break; + default: dev_dbg(scic_to_dev(scic), "%s: SCIC Controller linkup event from phy %d in " - "unexpected state %d\n", __func__, sci_phy->phy_index, - state); + "unexpected state %d\n", __func__, phy->phy_index, + scic->state_machine.current_state_id); + } } - -void scic_sds_controller_link_down( - struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) +void scic_sds_controller_link_down(struct scic_sds_controller *scic, + struct scic_sds_port *port, struct scic_sds_phy *phy) { - u32 state; - scic_sds_controller_phy_handler_t link_down; - - state = scic->state_machine.current_state_id; - link_down = scic_sds_controller_state_handler_table[state].link_down; - - if (link_down) - link_down(scic, sci_port, sci_phy); - else + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STARTING: + case SCI_BASE_CONTROLLER_STATE_READY: + scic->port_agent.link_down_handler(scic, &scic->port_agent, + port, phy); + break; + default: dev_dbg(scic_to_dev(scic), "%s: SCIC Controller linkdown event from phy %d in " "unexpected state %d\n", __func__, - sci_phy->phy_index, state); + phy->phy_index, + scic->state_machine.current_state_id); + } } /** @@ -1518,30 +1517,25 @@ static bool scic_sds_controller_has_remote_devices_stopping( /** * This method is called by the remote device to inform the controller * object that the remote device has stopped. - * */ - void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev) { - - u32 state; - scic_sds_controller_device_handler_t stopped; - - state = scic->state_machine.current_state_id; - stopped = scic_sds_controller_state_handler_table[state].device_stopped; - - if (stopped) - stopped(scic, sci_dev); - else { + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_STOPPING) { dev_dbg(scic_to_dev(scic), - "%s: SCIC Controller 0x%p remote device stopped event " - "from device 0x%p in unexpected state %d\n", - __func__, scic, sci_dev, state); + "SCIC Controller 0x%p remote device stopped event " + "from device 0x%p in unexpected state %d\n", + scic, sci_dev, + scic->state_machine.current_state_id); + return; } -} - + if (!scic_sds_controller_has_remote_devices_stopping(scic)) { + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STOPPED); + } +} /** * This method will write to the SCU PCP register the request value. The method @@ -1841,40 +1835,6 @@ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_co } /** - * scic_controller_initialize() - This method will initialize the controller - * hardware managed by the supplied core controller object. This method - * will bring the physical controller hardware out of reset and enable the - * core to determine the capabilities of the hardware being managed. Thus, - * the core controller can determine it's exact physical (DMA capable) - * memory requirements. - * @controller: This parameter specifies the controller to be initialized. - * - * The SCI Core user must have called scic_controller_construct() on the - * supplied controller object previously. Indicate if the controller was - * successfully initialized or if it failed in some way. SCI_SUCCESS This value - * is returned if the controller hardware was successfully initialized. - */ -enum sci_status scic_controller_initialize( - struct scic_sds_controller *scic) -{ - enum sci_status status = SCI_FAILURE_INVALID_STATE; - scic_sds_controller_handler_t initialize; - u32 state; - - state = scic->state_machine.current_state_id; - initialize = scic_sds_controller_state_handler_table[state].initialize; - - if (initialize) - status = initialize(scic); - else - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller initialize operation requested " - "in invalid state %d\n", __func__, state); - - return status; -} - -/** * scic_controller_get_suggested_start_timeout() - This method returns the * suggested scic_controller_start() timeout amount. The user is free to * use any timeout value, but this method provides the suggested minimum @@ -1913,49 +1873,6 @@ u32 scic_controller_get_suggested_start_timeout( } /** - * scic_controller_start() - This method will start the supplied core - * controller. This method will start the staggered spin up operation. The - * SCI User completion callback is called when the following conditions are - * met: -# the return status of this method is SCI_SUCCESS. -# after all of - * the phys have successfully started or been given the opportunity to start. - * @controller: the handle to the controller object to start. - * @timeout: This parameter specifies the number of milliseconds in which the - * start operation should complete. - * - * The SCI Core user must have filled in the physical memory descriptor - * structure via the sci_controller_get_memory_descriptor_list() method. The - * SCI Core user must have invoked the scic_controller_initialize() method - * prior to invoking this method. The controller must be in the INITIALIZED or - * STARTED state. Indicate if the controller start method succeeded or failed - * in some way. SCI_SUCCESS if the start operation succeeded. - * SCI_WARNING_ALREADY_IN_STATE if the controller is already in the STARTED - * state. SCI_FAILURE_INVALID_STATE if the controller is not either in the - * INITIALIZED or STARTED states. SCI_FAILURE_INVALID_MEMORY_DESCRIPTOR if - * there are inconsistent or invalid values in the supplied - * struct sci_physical_memory_descriptor array. - */ -enum sci_status scic_controller_start( - struct scic_sds_controller *scic, - u32 timeout) -{ - enum sci_status status = SCI_FAILURE_INVALID_STATE; - scic_sds_controller_timed_handler_t start; - u32 state; - - state = scic->state_machine.current_state_id; - start = scic_sds_controller_state_handler_table[state].start; - - if (start) - status = start(scic, timeout); - else - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller start operation requested in " - "invalid state %d\n", __func__, state); - - return status; -} - -/** * scic_controller_stop() - This method will stop an individual controller * object.This method will invoke the associated user callback upon * completion. The completion callback is called when the following @@ -1977,21 +1894,18 @@ enum sci_status scic_controller_stop( struct scic_sds_controller *scic, u32 timeout) { - enum sci_status status = SCI_FAILURE_INVALID_STATE; - scic_sds_controller_timed_handler_t stop; - u32 state; - - state = scic->state_machine.current_state_id; - stop = scic_sds_controller_state_handler_table[state].stop; - - if (stop) - status = stop(scic, timeout); - else + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { dev_warn(scic_to_dev(scic), - "%s: SCIC Controller stop operation requested in " - "invalid state %d\n", __func__, state); + "SCIC Controller stop operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } - return status; + isci_timer_start(scic->timeout_timer, timeout); + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STOPPING); + return SCI_SUCCESS; } /** @@ -2009,21 +1923,24 @@ enum sci_status scic_controller_stop( enum sci_status scic_controller_reset( struct scic_sds_controller *scic) { - enum sci_status status = SCI_FAILURE_INVALID_STATE; - scic_sds_controller_handler_t reset; - u32 state; - - state = scic->state_machine.current_state_id; - reset = scic_sds_controller_state_handler_table[state].reset; - - if (reset) - status = reset(scic); - else + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_RESET: + case SCI_BASE_CONTROLLER_STATE_READY: + case SCI_BASE_CONTROLLER_STATE_STOPPED: + case SCI_BASE_CONTROLLER_STATE_FAILED: + /* + * The reset operation is not a graceful cleanup, just + * perform the state transition. + */ + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_RESETTING); + return SCI_SUCCESS; + default: dev_warn(scic_to_dev(scic), - "%s: SCIC Controller reset operation requested in " - "invalid state %d\n", __func__, state); - - return status; + "SCIC Controller reset operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } } /** @@ -2055,19 +1972,25 @@ enum sci_status scic_controller_reset( */ enum sci_io_status scic_controller_start_io( struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *request, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req, u16 io_tag) { - u32 state; - scic_sds_controller_start_request_handler_t start_io; + enum sci_status status; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), "invalid state to start I/O"); + return SCI_FAILURE_INVALID_STATE; + } - state = scic->state_machine.current_state_id; - start_io = scic_sds_controller_state_handler_table[state].start_io; + status = scic_sds_remote_device_start_io(scic, rdev, req); + if (status != SCI_SUCCESS) + return status; - return start_io(scic, - (struct sci_base_remote_device *) remote_device, - request, io_tag); + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); + return SCI_SUCCESS; } /** @@ -2088,18 +2011,30 @@ enum sci_io_status scic_controller_start_io( */ enum sci_status scic_controller_terminate_request( struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *request) + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req) { - scic_sds_controller_request_handler_t terminate_request; - u32 state; + enum sci_status status; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), + "invalid state to terminate request\n"); + return SCI_FAILURE_INVALID_STATE; + } - state = scic->state_machine.current_state_id; - terminate_request = scic_sds_controller_state_handler_table[state].terminate_request; + status = scic_sds_io_request_terminate(req); + if (status != SCI_SUCCESS) + return status; - return terminate_request(scic, - (struct sci_base_remote_device *)remote_device, - request); + /* + * Utilize the original post context command and or in the POST_TC_ABORT + * request sub-type. + */ + scic_sds_controller_post_request(scic, + scic_sds_request_get_post_context(req) | + SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); + return SCI_SUCCESS; } /** @@ -2126,18 +2061,44 @@ enum sci_status scic_controller_terminate_request( */ enum sci_status scic_controller_complete_io( struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, + struct scic_sds_remote_device *rdev, struct scic_sds_request *request) { - u32 state; - scic_sds_controller_request_handler_t complete_io; + enum sci_status status; + u16 index; + + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STOPPING: + /* XXX: Implement this function */ + return SCI_FAILURE; + case SCI_BASE_CONTROLLER_STATE_READY: + status = scic_sds_remote_device_complete_io(scic, rdev, request); + if (status != SCI_SUCCESS) + return status; + + index = scic_sds_io_tag_get_index(request->io_tag); + scic->io_request_table[index] = NULL; + return SCI_SUCCESS; + default: + dev_warn(scic_to_dev(scic), "invalid state to complete I/O"); + return SCI_FAILURE_INVALID_STATE; + } + +} + +enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; - state = scic->state_machine.current_state_id; - complete_io = scic_sds_controller_state_handler_table[state].complete_io; + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), "invalid state to continue I/O"); + return SCI_FAILURE_INVALID_STATE; + } - return complete_io(scic, - (struct sci_base_remote_device *)remote_device, - request); + scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req; + scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req)); + return SCI_SUCCESS; } /** @@ -2170,71 +2131,45 @@ enum sci_status scic_controller_complete_io( */ enum sci_task_status scic_controller_start_task( struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *task_request, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req, u16 task_tag) { - u32 state; - scic_sds_controller_start_request_handler_t start_task; - enum sci_task_status status = SCI_TASK_FAILURE_INVALID_STATE; - - state = scic->state_machine.current_state_id; - start_task = scic_sds_controller_state_handler_table[state].start_task; + enum sci_status status; - if (start_task) - status = start_task(scic, - (struct sci_base_remote_device *)remote_device, - task_request, - task_tag); - else + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { dev_warn(scic_to_dev(scic), "%s: SCIC Controller starting task from invalid " "state\n", __func__); + return SCI_TASK_FAILURE_INVALID_STATE; + } - return status; -} - -/** - * scic_controller_complete_task() - This method will perform core specific - * completion operations for task management request. After this method is - * invoked, the user should consider the task request as invalid until it is - * properly reused (i.e. re-constructed). - * @controller: The handle to the controller object for which to complete the - * task management request. - * @remote_device: The handle to the remote device object for which to complete - * the task management request. - * @task_request: the handle to the task management request object to complete. - * - * Indicate if the controller successfully completed the task management - * request. SCI_SUCCESS if the completion process was successful. - */ -enum sci_status scic_controller_complete_task( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *task_request) -{ - u32 state; - scic_sds_controller_request_handler_t complete_task; - enum sci_status status = SCI_FAILURE_INVALID_STATE; + status = scic_sds_remote_device_start_task(scic, rdev, req); + switch (status) { + case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; - state = scic->state_machine.current_state_id; - complete_task = scic_sds_controller_state_handler_table[state].complete_task; + /* + * We will let framework know this task request started successfully, + * although core is still woring on starting the request (to post tc when + * RNC is resumed.) + */ + return SCI_SUCCESS; + case SCI_SUCCESS: + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; - if (complete_task) - status = complete_task(scic, - (struct sci_base_remote_device *)remote_device, - task_request); - else - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller completing task from invalid " - "state\n", - __func__); + scic_sds_controller_post_request(scic, + scic_sds_request_get_post_context(req)); + break; + default: + break; + } return status; } - /** * scic_controller_get_port_handle() - This method simply provides the user * with a unique handle for a given SAS/SATA core port index. @@ -2706,52 +2641,23 @@ struct scic_sds_controller *scic_controller_alloc(struct device *dev) return devm_kzalloc(dev, sizeof(struct scic_sds_controller), GFP_KERNEL); } -static enum sci_status -default_controller_handler(struct scic_sds_controller *scic, const char *func) -{ - dev_warn(scic_to_dev(scic), "%s: invalid state %d\n", func, - scic->state_machine.current_state_id); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_controller_default_start_operation_handler( - struct scic_sds_controller *scic, - struct sci_base_remote_device *remote_device, - struct scic_sds_request *request, - u16 io_tag) -{ - return default_controller_handler(scic, __func__); -} - -static enum sci_status scic_sds_controller_default_request_handler( - struct scic_sds_controller *scic, - struct sci_base_remote_device *remote_device, - struct scic_sds_request *request) -{ - return default_controller_handler(scic, __func__); -} - -static enum sci_status -scic_sds_controller_general_reset_handler(struct scic_sds_controller *scic) -{ - /* The reset operation is not a graceful cleanup just perform the state - * transition. - */ - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESETTING); - - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_controller_reset_state_initialize_handler(struct scic_sds_controller *scic) +enum sci_status scic_controller_initialize( + struct scic_sds_controller *scic) { struct sci_base_state_machine *sm = &scic->state_machine; enum sci_status result = SCI_SUCCESS; struct isci_host *ihost; u32 index, state; + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_RESET) { + dev_warn(scic_to_dev(scic), + "SCIC Controller initialize operation requested " + "in invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + ihost = sci_object_get_association(scic); sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); @@ -2908,30 +2814,19 @@ scic_sds_controller_reset_state_initialize_handler(struct scic_sds_controller *s return result; } -/* - * ***************************************************************************** - * * INITIALIZED STATE HANDLERS - * ***************************************************************************** */ - -/* - * This function is the struct scic_sds_controller start handler for the - * initialized state. - * - Validate we have a good memory descriptor table - Initialze the - * physical memory before programming the hardware - Program the SCU hardware - * with the physical memory addresses passed in the memory descriptor table. - - * Initialzie the TCi pool - Initialize the RNi pool - Initialize the - * completion queue - Initialize the unsolicited frame data - Take the SCU port - * task scheduler out of reset - Start the first phy object. - Transition to - * SCI_BASE_CONTROLLER_STATE_STARTING. enum sci_status SCI_SUCCESS if all of the - * controller start operations complete - * SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD if one or more of the memory - * descriptor fields is invalid. - */ -static enum sci_status scic_sds_controller_initialized_state_start_handler( - struct scic_sds_controller *scic, u32 timeout) +enum sci_status scic_controller_start(struct scic_sds_controller *scic, + u32 timeout) { - u16 index; enum sci_status result; + u16 index; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + dev_warn(scic_to_dev(scic), + "SCIC Controller start operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } /* Build the TCi free pool */ sci_pool_initialize(scic->tci_pool); @@ -2981,376 +2876,6 @@ static enum sci_status scic_sds_controller_initialized_state_start_handler( return SCI_SUCCESS; } -/* - * ***************************************************************************** - * * INITIALIZED STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @controller: This is struct scic_sds_controller which receives the link up - * notification. - * @port: This is struct scic_sds_port with which the phy is associated. - * @phy: This is the struct scic_sds_phy which has gone link up. - * - * This method is called when the struct scic_sds_controller is in the starting state - * link up handler is called. This method will perform the following: - Stop - * the phy timer - Start the next phy - Report the link up condition to the - * port object none - */ -static void scic_sds_controller_starting_state_link_up_handler( - struct scic_sds_controller *this_controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - scic_sds_controller_phy_timer_stop(this_controller); - - this_controller->port_agent.link_up_handler( - this_controller, &this_controller->port_agent, port, phy - ); - /* scic_sds_port_link_up(port, phy); */ - - scic_sds_controller_start_next_phy(this_controller); -} - -/** - * - * @controller: This is struct scic_sds_controller which receives the link down - * notification. - * @port: This is struct scic_sds_port with which the phy is associated. - * @phy: This is the struct scic_sds_phy which has gone link down. - * - * This method is called when the struct scic_sds_controller is in the starting state - * link down handler is called. - Report the link down condition to the port - * object none - */ -static void scic_sds_controller_starting_state_link_down_handler( - struct scic_sds_controller *this_controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - this_controller->port_agent.link_down_handler( - this_controller, &this_controller->port_agent, port, phy - ); - /* scic_sds_port_link_down(port, phy); */ -} - -static enum sci_status scic_sds_controller_ready_state_stop_handler( - struct scic_sds_controller *scic, - u32 timeout) -{ - isci_timer_start(scic->timeout_timer, timeout); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STOPPING); - return SCI_SUCCESS; -} - -/* - * This method is called when the struct scic_sds_controller is in the ready state and - * the start io handler is called. - Start the io request on the remote device - * - if successful - assign the io_request to the io_request_table - post the - * request to the hardware enum sci_status SCI_SUCCESS if the start io operation - * succeeds SCI_FAILURE_INSUFFICIENT_RESOURCES if the IO tag could not be - * allocated for the io request. SCI_FAILURE_INVALID_STATE if one or more - * objects are not in a valid state to accept io requests. - * - * XXX: How does the io_tag parameter get assigned to the io request? - */ -static enum sci_status scic_sds_controller_ready_state_start_io_handler( - struct scic_sds_controller *controller, - struct sci_base_remote_device *remote_device, - struct scic_sds_request *request, - u16 io_tag) -{ - enum sci_status status; - - struct scic_sds_remote_device *the_device; - - the_device = (struct scic_sds_remote_device *)remote_device; - - status = scic_sds_remote_device_start_io(controller, the_device, request); - - if (status != SCI_SUCCESS) - return status; - - controller->io_request_table[ - scic_sds_io_tag_get_index(request->io_tag)] = request; - scic_sds_controller_post_request(controller, - scic_sds_request_get_post_context(request)); - return SCI_SUCCESS; -} - -/* - * This method is called when the struct scic_sds_controller is in the ready state and - * the complete io handler is called. - Complete the io request on the remote - * device - if successful - remove the io_request to the io_request_table - * enum sci_status SCI_SUCCESS if the start io operation succeeds - * SCI_FAILURE_INVALID_STATE if one or more objects are not in a valid state to - * accept io requests. - */ -static enum sci_status scic_sds_controller_ready_state_complete_io_handler( - struct scic_sds_controller *controller, - struct sci_base_remote_device *remote_device, - struct scic_sds_request *request) -{ - u16 index; - enum sci_status status; - struct scic_sds_remote_device *the_device; - - the_device = (struct scic_sds_remote_device *)remote_device; - - status = scic_sds_remote_device_complete_io(controller, the_device, - request); - if (status != SCI_SUCCESS) - return status; - - index = scic_sds_io_tag_get_index(request->io_tag); - controller->io_request_table[index] = NULL; - return SCI_SUCCESS; -} - -/* - * This method is called when the struct scic_sds_controller is in the ready state and - * the continue io handler is called. enum sci_status - */ -static enum sci_status scic_sds_controller_ready_state_continue_io_handler( - struct scic_sds_controller *controller, - struct sci_base_remote_device *remote_device, - struct scic_sds_request *request) -{ - controller->io_request_table[ - scic_sds_io_tag_get_index(request->io_tag)] = request; - scic_sds_controller_post_request(controller, - scic_sds_request_get_post_context(request)); - return SCI_SUCCESS; -} - -/* - * This method is called when the struct scic_sds_controller is in the ready state and - * the start task handler is called. - The remote device is requested to start - * the task request - if successful - assign the task to the io_request_table - - * post the request to the SCU hardware enum sci_status SCI_SUCCESS if the start io - * operation succeeds SCI_FAILURE_INSUFFICIENT_RESOURCES if the IO tag could - * not be allocated for the io request. SCI_FAILURE_INVALID_STATE if one or - * more objects are not in a valid state to accept io requests. How does the io - * tag get assigned in this code path? - */ -static enum sci_status scic_sds_controller_ready_state_start_task_handler( - struct scic_sds_controller *controller, - struct sci_base_remote_device *remote_device, - struct scic_sds_request *request, - u16 task_tag) -{ - struct scic_sds_remote_device *the_device = (struct scic_sds_remote_device *) - remote_device; - enum sci_status status; - - status = scic_sds_remote_device_start_task(controller, the_device, - request); - - if (status == SCI_SUCCESS) { - controller->io_request_table[ - scic_sds_io_tag_get_index(request->io_tag)] = request; - - scic_sds_controller_post_request(controller, - scic_sds_request_get_post_context(request)); - } else if (status == SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS) { - controller->io_request_table[ - scic_sds_io_tag_get_index(request->io_tag)] = request; - - /* - * We will let framework know this task request started successfully, - * although core is still woring on starting the request (to post tc when - * RNC is resumed.) */ - status = SCI_SUCCESS; - } - return status; -} - -/* - * This method is called when the struct scic_sds_controller is in the ready state and - * the terminate request handler is called. - call the io request terminate - * function - if successful - post the terminate request to the SCU hardware - * enum sci_status SCI_SUCCESS if the start io operation succeeds - * SCI_FAILURE_INVALID_STATE if one or more objects are not in a valid state to - * accept io requests. - */ -static enum sci_status scic_sds_controller_ready_state_terminate_request_handler( - struct scic_sds_controller *controller, - struct sci_base_remote_device *remote_device, - struct scic_sds_request *request) -{ - enum sci_status status; - - status = scic_sds_io_request_terminate(request); - if (status != SCI_SUCCESS) - return status; - - /* - * Utilize the original post context command and or in the POST_TC_ABORT - * request sub-type. - */ - scic_sds_controller_post_request(controller, - scic_sds_request_get_post_context(request) | - SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); - return SCI_SUCCESS; -} - -/** - * - * @controller: This is struct scic_sds_controller which receives the link up - * notification. - * @port: This is struct scic_sds_port with which the phy is associated. - * @phy: This is the struct scic_sds_phy which has gone link up. - * - * This method is called when the struct scic_sds_controller is in the starting state - * link up handler is called. This method will perform the following: - Stop - * the phy timer - Start the next phy - Report the link up condition to the - * port object none - */ -static void scic_sds_controller_ready_state_link_up_handler( - struct scic_sds_controller *this_controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - this_controller->port_agent.link_up_handler( - this_controller, &this_controller->port_agent, port, phy - ); -} - -/** - * - * @controller: This is struct scic_sds_controller which receives the link down - * notification. - * @port: This is struct scic_sds_port with which the phy is associated. - * @phy: This is the struct scic_sds_phy which has gone link down. - * - * This method is called when the struct scic_sds_controller is in the starting state - * link down handler is called. - Report the link down condition to the port - * object none - */ -static void scic_sds_controller_ready_state_link_down_handler( - struct scic_sds_controller *this_controller, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - this_controller->port_agent.link_down_handler( - this_controller, &this_controller->port_agent, port, phy - ); -} - -/* - * ***************************************************************************** - * * STOPPING STATE HANDLERS - * ***************************************************************************** */ - -/** - * This method is called when the struct scic_sds_controller is in a stopping state - * and the complete io handler is called. - This function is not yet - * implemented enum sci_status SCI_FAILURE - */ -static enum sci_status scic_sds_controller_stopping_state_complete_io_handler( - struct scic_sds_controller *controller, - struct sci_base_remote_device *remote_device, - struct scic_sds_request *request) -{ - /* XXX: Implement this function */ - return SCI_FAILURE; -} - -/** - * This method is called when the struct scic_sds_controller is in a stopping state - * and the remote device has stopped. - **/ -static void scic_sds_controller_stopping_state_device_stopped_handler( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device -) -{ - if (!scic_sds_controller_has_remote_devices_stopping(controller)) { - sci_base_state_machine_change_state(&controller->state_machine, - SCI_BASE_CONTROLLER_STATE_STOPPED - ); - } -} - -const struct scic_sds_controller_state_handler scic_sds_controller_state_handler_table[] = { - [SCI_BASE_CONTROLLER_STATE_INITIAL] = { - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_default_request_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - }, - [SCI_BASE_CONTROLLER_STATE_RESET] = { - .reset = scic_sds_controller_general_reset_handler, - .initialize = scic_sds_controller_reset_state_initialize_handler, - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_default_request_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - }, - [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = { - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_default_request_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - }, - [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = { - .start = scic_sds_controller_initialized_state_start_handler, - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_default_request_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - }, - [SCI_BASE_CONTROLLER_STATE_STARTING] = { - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_default_request_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - .link_up = scic_sds_controller_starting_state_link_up_handler, - .link_down = scic_sds_controller_starting_state_link_down_handler - }, - [SCI_BASE_CONTROLLER_STATE_READY] = { - .stop = scic_sds_controller_ready_state_stop_handler, - .reset = scic_sds_controller_general_reset_handler, - .start_io = scic_sds_controller_ready_state_start_io_handler, - .complete_io = scic_sds_controller_ready_state_complete_io_handler, - .continue_io = scic_sds_controller_ready_state_continue_io_handler, - .start_task = scic_sds_controller_ready_state_start_task_handler, - .complete_task = scic_sds_controller_ready_state_complete_io_handler, - .terminate_request = scic_sds_controller_ready_state_terminate_request_handler, - .link_up = scic_sds_controller_ready_state_link_up_handler, - .link_down = scic_sds_controller_ready_state_link_down_handler - }, - [SCI_BASE_CONTROLLER_STATE_RESETTING] = { - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_default_request_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - }, - [SCI_BASE_CONTROLLER_STATE_STOPPING] = { - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_stopping_state_complete_io_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - .device_stopped = scic_sds_controller_stopping_state_device_stopped_handler, - }, - [SCI_BASE_CONTROLLER_STATE_STOPPED] = { - .reset = scic_sds_controller_general_reset_handler, - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_default_request_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - }, - [SCI_BASE_CONTROLLER_STATE_FAILED] = { - .reset = scic_sds_controller_general_reset_handler, - .start_io = scic_sds_controller_default_start_operation_handler, - .complete_io = scic_sds_controller_default_request_handler, - .continue_io = scic_sds_controller_default_request_handler, - .terminate_request = scic_sds_controller_default_request_handler, - }, -}; - /** * * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 163a9e1..9a646e5 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -430,90 +430,6 @@ enum scic_sds_controller_states { }; -typedef enum sci_status (*scic_sds_controller_handler_t) - (struct scic_sds_controller *); -typedef enum sci_status (*scic_sds_controller_timed_handler_t) - (struct scic_sds_controller *, u32); -typedef enum sci_status (*scic_sds_controller_request_handler_t) - (struct scic_sds_controller *, - struct sci_base_remote_device *, - struct scic_sds_request *); -typedef enum sci_status (*scic_sds_controller_start_request_handler_t) - (struct scic_sds_controller *, - struct sci_base_remote_device *, - struct scic_sds_request *, u16); -typedef void (*scic_sds_controller_phy_handler_t) - (struct scic_sds_controller *, - struct scic_sds_port *, - struct scic_sds_phy *); -typedef void (*scic_sds_controller_device_handler_t) - (struct scic_sds_controller *, - struct scic_sds_remote_device *); - -struct scic_sds_controller_state_handler { - /** - * The start_handler specifies the method invoked when a user attempts to - * start a controller. - */ - scic_sds_controller_timed_handler_t start; - - /** - * The stop_handler specifies the method invoked when a user attempts to - * stop a controller. - */ - scic_sds_controller_timed_handler_t stop; - - /** - * The reset_handler specifies the method invoked when a user attempts to - * reset a controller. - */ - scic_sds_controller_handler_t reset; - - /** - * The initialize_handler specifies the method invoked when a user - * attempts to initialize a controller. - */ - scic_sds_controller_handler_t initialize; - - /** - * The start_io_handler specifies the method invoked when a user - * attempts to start an IO request for a controller. - */ - scic_sds_controller_start_request_handler_t start_io; - - /** - * The complete_io_handler specifies the method invoked when a user - * attempts to complete an IO request for a controller. - */ - scic_sds_controller_request_handler_t complete_io; - - /** - * The continue_io_handler specifies the method invoked when a user - * attempts to continue an IO request for a controller. - */ - scic_sds_controller_request_handler_t continue_io; - - /** - * The start_task_handler specifies the method invoked when a user - * attempts to start a task management request for a controller. - */ - scic_sds_controller_start_request_handler_t start_task; - - /** - * The complete_task_handler specifies the method invoked when a user - * attempts to complete a task management request for a controller. - */ - scic_sds_controller_request_handler_t complete_task; - - scic_sds_controller_request_handler_t terminate_request; - scic_sds_controller_phy_handler_t link_up; - scic_sds_controller_phy_handler_t link_down; - scic_sds_controller_device_handler_t device_stopped; -}; - -extern const struct scic_sds_controller_state_handler - scic_sds_controller_state_handler_table[]; - /** * INCREMENT_QUEUE_GET() - * @@ -676,4 +592,6 @@ void scic_sds_controller_copy_task_context( void scic_sds_controller_register_setup( struct scic_sds_controller *this_controller); +enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req); + #endif /* _SCIC_SDS_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index cb49a33..f0d1c09 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -558,17 +558,10 @@ void scic_sds_remote_device_start_request( void scic_sds_remote_device_continue_request(void *dev) { struct scic_sds_remote_device *sci_dev = dev; - struct scic_sds_request *sci_req = sci_dev->working_request; /* we need to check if this request is still valid to continue. */ - if (sci_req) { - struct scic_sds_controller *scic = sci_req->owning_controller; - u32 state = scic->state_machine.current_state_id; - scic_sds_controller_request_handler_t continue_io; - - continue_io = scic_sds_controller_state_handler_table[state].continue_io; - continue_io(scic, &sci_req->target_device->parent, sci_req); - } + if (sci_dev->working_request) + scic_controller_continue_io(sci_dev->working_request); } /** diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 0b3bc65..e4ca4e4 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -637,10 +637,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( u32 length) { struct scic_sds_stp_request *this_sds_stp_request = (struct scic_sds_stp_request *)this_request; - scic_sds_controller_request_handler_t continue_io; struct scu_sgl_element *current_sgl; - struct scic_sds_controller *scic; - u32 state; /* * Recycle the TC and reconstruct it for sending out DATA FIS containing @@ -662,10 +659,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; /* send the new TC out. */ - scic = this_request->owning_controller; - state = scic->state_machine.current_state_id; - continue_io = scic_sds_controller_state_handler_table[state].continue_io; - return continue_io(scic, &this_request->target_device->parent, this_request); + return scic_controller_continue_io(this_request); } /** @@ -1758,12 +1752,9 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet struct sci_base_object *object) { struct scic_sds_request *this_request = (struct scic_sds_request *)object; - scic_sds_controller_request_handler_t continue_io; struct scu_task_context *task_context; struct sata_fis_reg_h2d *h2d_fis; - struct scic_sds_controller *scic; enum sci_status status; - u32 state; /* Clear the SRST bit */ h2d_fis = scic_stp_io_request_get_h2d_reg_address(this_request); @@ -1774,12 +1765,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet this_request->owning_controller, this_request->io_tag); task_context->control_frame = 0; - scic = this_request->owning_controller; - state = scic->state_machine.current_state_id; - continue_io = scic_sds_controller_state_handler_table[state].continue_io; - - status = continue_io(scic, &this_request->target_device->parent, this_request); - + status = scic_controller_continue_io(this_request); if (status == SCI_SUCCESS) { SET_STATE_HANDLER( this_request, diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c6c97ad..aa6b430 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1480,7 +1480,7 @@ void isci_task_request_complete( /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; - scic_controller_complete_task( + scic_controller_complete_io( isci_host->core_controller, to_sci_dev(isci_device), request->sci_request_handle -- cgit v0.10.2 From 0ea99d52cbcdb4bf5f5dd3097088a2919a115981 Mon Sep 17 00:00:00 2001 From: Maciej Trela Date: Tue, 12 Apr 2011 17:28:35 -0700 Subject: isci: remove base_remote_device abstraction Merge struct sci_base_remote_device into scic_sds_remote_device. As for now sci_base_remote_device was accessed indirectly using scic_sds_remote_device->parent field. Both machine state handlers are also merged together. Reported-by: Christoph Hellwig Signed-off-by: Maciej Trela Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_remote_device.h b/drivers/scsi/isci/core/sci_base_remote_device.h deleted file mode 100644 index 5db5f31..0000000 --- a/drivers/scsi/isci/core/sci_base_remote_device.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_REMOTE_DEVICE_H_ -#define _SCI_BASE_REMOTE_DEVICE_H_ - -/** - * This file contains all of the structures, constants, and methods common to - * all remote device object definitions. - * - * - */ - -#include "sci_base_state_machine.h" - -struct scic_sds_request; - -/** - * enum sci_base_remote_device_states - This enumeration depicts all the states - * for the common remote device state machine. - * - * - */ -enum sci_base_remote_device_states { - /** - * Simply the initial state for the base remote device state machine. - */ - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL, - - /** - * This state indicates that the remote device has successfully been - * stopped. In this state no new IO operations are permitted. - * This state is entered from the INITIAL state. - * This state is entered from the STOPPING state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED, - - /** - * This state indicates the the remote device is in the process of - * becoming ready (i.e. starting). In this state no new IO operations - * are permitted. - * This state is entered from the STOPPED state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STARTING, - - /** - * This state indicates the remote device is now ready. Thus, the user - * is able to perform IO operations on the remote device. - * This state is entered from the STARTING state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_READY, - - /** - * This state indicates that the remote device is in the process of - * stopping. In this state no new IO operations are permitted, but - * existing IO operations are allowed to complete. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, - - /** - * This state indicates that the remote device has failed. - * In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the READY state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_FAILED, - - /** - * This state indicates the device is being reset. - * In this state no new IO operations are permitted. - * This state is entered from the READY state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, - - /** - * Simply the final state for the base remote device state machine. - */ - SCI_BASE_REMOTE_DEVICE_STATE_FINAL, -}; - -/** - * struct sci_base_remote_device - The base remote device object abstracts the - * fields common to all SCI remote device objects. - * - * - */ -struct sci_base_remote_device { - /** - * The field specifies that the parent object for the base remote - * device is the base object itself. - */ - struct sci_base_object parent; - - /** - * This field contains the information for the base remote device state - * machine. - */ - struct sci_base_state_machine state_machine; -}; - - -typedef enum sci_status (*sci_base_remote_device_handler_t)( - struct sci_base_remote_device * - ); - -typedef enum sci_status (*sci_base_remote_device_request_handler_t)( - struct sci_base_remote_device *, - struct scic_sds_request * - ); - -typedef enum sci_status (*sci_base_remote_device_high_priority_request_complete_handler_t)( - struct sci_base_remote_device *, - struct scic_sds_request *, - void *, - enum sci_io_status - ); - -/** - * struct sci_base_remote_device_state_handler - This structure contains all of - * the state handler methods common to base remote device state machines. - * Handler methods provide the ability to change the behavior for user - * requests or transitions depending on the state the machine is in. - * - * - */ -struct sci_base_remote_device_state_handler { - /** - * The start_handler specifies the method invoked when a user attempts to - * start a remote device. - */ - sci_base_remote_device_handler_t start_handler; - - /** - * The stop_handler specifies the method invoked when a user attempts to - * stop a remote device. - */ - sci_base_remote_device_handler_t stop_handler; - - /** - * The fail_handler specifies the method invoked when a remote device - * failure has occurred. A failure may be due to an inability to - * initialize/configure the device. - */ - sci_base_remote_device_handler_t fail_handler; - - /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a remote device. - */ - sci_base_remote_device_handler_t destruct_handler; - - /** - * The reset handler specifies the method invloked when requesting to reset a - * remote device. - */ - sci_base_remote_device_handler_t reset_handler; - - /** - * The reset complete handler specifies the method invloked when reporting - * that a reset has completed to the remote device. - */ - sci_base_remote_device_handler_t reset_complete_handler; - - /** - * The start_io_handler specifies the method invoked when a user - * attempts to start an IO request for a remote device. - */ - sci_base_remote_device_request_handler_t start_io_handler; - - /** - * The complete_io_handler specifies the method invoked when a user - * attempts to complete an IO request for a remote device. - */ - sci_base_remote_device_request_handler_t complete_io_handler; - - /** - * The continue_io_handler specifies the method invoked when a user - * attempts to continue an IO request for a remote device. - */ - sci_base_remote_device_request_handler_t continue_io_handler; - - /** - * The start_task_handler specifies the method invoked when a user - * attempts to start a task management request for a remote device. - */ - sci_base_remote_device_request_handler_t start_task_handler; - - /** - * The complete_task_handler specifies the method invoked when a user - * attempts to complete a task management request for a remote device. - */ - sci_base_remote_device_request_handler_t complete_task_handler; - -}; - -/** - * sci_base_remote_device_construct() - Construct the base remote device - * @this_remote_device: This parameter specifies the base remote device to be - * constructed. - * @state_table: This parameter specifies the table of state definitions to be - * utilized for the remote device state machine. - * - */ -static inline void sci_base_remote_device_construct( - struct sci_base_remote_device *base_dev, - const struct sci_base_state *state_table) -{ - base_dev->parent.private = NULL; - sci_base_state_machine_construct( - &base_dev->state_machine, - &base_dev->parent, - state_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL - ); - - sci_base_state_machine_start( - &base_dev->state_machine - ); -} -#endif /* _SCI_BASE_REMOTE_DEVICE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index f16a23a..7a0c590 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1500,13 +1500,13 @@ void scic_sds_controller_link_down(struct scic_sds_controller *scic, * */ static bool scic_sds_controller_has_remote_devices_stopping( - struct scic_sds_controller *this_controller) + struct scic_sds_controller *controller) { u32 index; - for (index = 0; index < this_controller->remote_node_entries; index++) { - if ((this_controller->device_table[index] != NULL) && - (this_controller->device_table[index]->parent.state_machine.current_state_id + for (index = 0; index < controller->remote_node_entries; index++) { + if ((controller->device_table[index] != NULL) && + (controller->device_table[index]->state_machine.current_state_id == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)) return true; } diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index f0d1c09..d756216 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -123,7 +123,7 @@ enum sci_status scic_remote_device_da_construct( sci_base_state_machine_construct( &sci_dev->ready_substate_machine, - &sci_dev->parent.parent, + &sci_dev->parent, scic_sds_stp_remote_device_ready_substate_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { @@ -132,7 +132,7 @@ enum sci_status scic_remote_device_da_construct( /* add the SMP ready substate machine construction here */ sci_base_state_machine_construct( &sci_dev->ready_substate_machine, - &sci_dev->parent.parent, + &sci_dev->parent, scic_sds_smp_remote_device_ready_substate_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } @@ -187,7 +187,7 @@ enum sci_status scic_remote_device_ea_construct( /* add the SMP ready substate machine construction here */ sci_base_state_machine_construct( &sci_dev->ready_substate_machine, - &sci_dev->parent.parent, + &sci_dev->parent, scic_sds_smp_remote_device_ready_substate_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { @@ -195,7 +195,7 @@ enum sci_status scic_remote_device_ea_construct( sci_base_state_machine_construct( &sci_dev->ready_substate_machine, - &sci_dev->parent.parent, + &sci_dev->parent, scic_sds_stp_remote_device_ready_substate_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } @@ -222,7 +222,7 @@ enum sci_status scic_remote_device_ea_construct( enum sci_status scic_remote_device_destruct( struct scic_sds_remote_device *sci_dev) { - return sci_dev->state_handlers->parent.destruct_handler(&sci_dev->parent); + return sci_dev->state_handlers->destruct_handler(sci_dev); } @@ -230,7 +230,7 @@ enum sci_status scic_remote_device_start( struct scic_sds_remote_device *sci_dev, u32 timeout) { - return sci_dev->state_handlers->parent.start_handler(&sci_dev->parent); + return sci_dev->state_handlers->start_handler(sci_dev); } @@ -238,21 +238,21 @@ enum sci_status scic_remote_device_stop( struct scic_sds_remote_device *sci_dev, u32 timeout) { - return sci_dev->state_handlers->parent.stop_handler(&sci_dev->parent); + return sci_dev->state_handlers->stop_handler(sci_dev); } enum sci_status scic_remote_device_reset( struct scic_sds_remote_device *sci_dev) { - return sci_dev->state_handlers->parent.reset_handler(&sci_dev->parent); + return sci_dev->state_handlers->reset_handler(sci_dev); } enum sci_status scic_remote_device_reset_complete( struct scic_sds_remote_device *sci_dev) { - return sci_dev->state_handlers->parent.reset_complete_handler(&sci_dev->parent); + return sci_dev->state_handlers->reset_complete_handler(sci_dev); } @@ -362,8 +362,8 @@ enum sci_status scic_sds_remote_device_start_io( struct scic_sds_remote_device *this_device, struct scic_sds_request *io_request) { - return this_device->state_handlers->parent.start_io_handler( - &this_device->parent, io_request); + return this_device->state_handlers->start_io_handler( + this_device, io_request); } /** @@ -380,8 +380,8 @@ enum sci_status scic_sds_remote_device_complete_io( struct scic_sds_remote_device *this_device, struct scic_sds_request *io_request) { - return this_device->state_handlers->parent.complete_io_handler( - &this_device->parent, io_request); + return this_device->state_handlers->complete_io_handler( + this_device, io_request); } /** @@ -398,8 +398,8 @@ enum sci_status scic_sds_remote_device_start_task( struct scic_sds_remote_device *this_device, struct scic_sds_request *io_request) { - return this_device->state_handlers->parent.start_task_handler( - &this_device->parent, io_request); + return this_device->state_handlers->start_task_handler( + this_device, io_request); } /** @@ -491,7 +491,7 @@ static void scic_sds_cb_remote_device_rnc_destruct_complete( BUG_ON(sci_dev->started_request_count != 0); - sci_base_state_machine_change_state(&sci_dev->parent.state_machine, + sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); } @@ -511,11 +511,11 @@ static void scic_sds_remote_device_resume_complete_handler( this_device = (struct scic_sds_remote_device *)user_parameter; if ( - sci_base_state_machine_get_state(&this_device->parent.state_machine) + sci_base_state_machine_get_state(&this_device->state_machine) != SCI_BASE_REMOTE_DEVICE_STATE_READY ) { sci_base_state_machine_change_state( - &this_device->parent.state_machine, + &this_device->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_READY ); } @@ -614,69 +614,67 @@ static enum sci_status scic_sds_remote_device_terminate_requests( return status; } -static enum sci_status default_device_handler(struct sci_base_remote_device *base_dev, - const char *func) +static enum sci_status +default_device_handler(struct scic_sds_remote_device *sci_dev, + const char *func) { - struct scic_sds_remote_device *sci_dev; - - sci_dev = container_of(base_dev, typeof(*sci_dev), parent); dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&base_dev->state_machine)); + sci_base_state_machine_get_state(&sci_dev->state_machine)); return SCI_FAILURE_INVALID_STATE; } enum sci_status scic_sds_remote_device_default_start_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } static enum sci_status scic_sds_remote_device_default_stop_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } enum sci_status scic_sds_remote_device_default_fail_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } enum sci_status scic_sds_remote_device_default_destruct_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } enum sci_status scic_sds_remote_device_default_reset_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } enum sci_status scic_sds_remote_device_default_suspend_handler( struct scic_sds_remote_device *sci_dev, u32 suspend_type) { - return default_device_handler(&sci_dev->parent, __func__); + return default_device_handler(sci_dev, __func__); } enum sci_status scic_sds_remote_device_default_resume_handler( struct scic_sds_remote_device *sci_dev) { - return default_device_handler(&sci_dev->parent, __func__); + return default_device_handler(sci_dev, __func__); } /** * - * @device: The struct sci_base_remote_device which is then cast into a + * @device: The struct scic_sds_remote_device which is then cast into a * struct scic_sds_remote_device. * @event_code: The event code that the struct scic_sds_controller wants the device * object to process. @@ -734,7 +732,7 @@ static enum sci_status scic_sds_remote_device_core_event_handler( } /** * - * @device: The struct sci_base_remote_device which is then cast into a + * @device: The struct scic_sds_remote_device which is then cast into a * struct scic_sds_remote_device. * @event_code: The event code that the struct scic_sds_controller wants the device * object to process. @@ -754,7 +752,7 @@ static enum sci_status scic_sds_remote_device_default_event_handler( /** * - * @device: The struct sci_base_remote_device which is then cast into a + * @device: The struct scic_sds_remote_device which is then cast into a * struct scic_sds_remote_device. * @frame_index: The frame index for which the struct scic_sds_controller wants this * device object to process. @@ -773,7 +771,7 @@ enum sci_status scic_sds_remote_device_default_frame_handler( __func__, frame_index, sci_base_state_machine_get_state( - &this_device->parent.state_machine)); + &this_device->state_machine)); /* Return the frame back to the controller */ scic_sds_controller_release_frame( @@ -784,29 +782,29 @@ enum sci_status scic_sds_remote_device_default_frame_handler( } enum sci_status scic_sds_remote_device_default_start_request_handler( - struct sci_base_remote_device *base_dev, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct sci_base_remote_device *base_dev, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct sci_base_remote_device *base_dev, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { - return default_device_handler(base_dev, __func__); + return default_device_handler(sci_dev, __func__); } /** * - * @device: The struct sci_base_remote_device which is then cast into a + * @device: The struct scic_sds_remote_device which is then cast into a * struct scic_sds_remote_device. * @frame_index: The frame index for which the struct scic_sds_controller wants this * device object to process. @@ -887,32 +885,29 @@ enum sci_status scic_sds_remote_device_general_event_handler( * which to construct the remote device. */ static enum sci_status scic_sds_remote_device_stopped_state_start_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { enum sci_status status; - struct scic_sds_remote_device *sci_dev; - - sci_dev = container_of(base_dev, typeof(*sci_dev), parent); status = scic_sds_remote_node_context_resume(sci_dev->rnc, scic_sds_remote_device_resume_complete_handler, sci_dev); if (status == SCI_SUCCESS) - sci_base_state_machine_change_state(&base_dev->state_machine, + sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STARTING); return status; } static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { return SCI_SUCCESS; } /** * - * @sci_dev: The struct sci_base_remote_device which is cast into a + * @sci_dev: The struct scic_sds_remote_device which is cast into a * struct scic_sds_remote_device. * * This method will destruct a struct scic_sds_remote_device that is in a stopped @@ -922,18 +917,16 @@ static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( * enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - struct scic_sds_remote_device *sci_dev; struct scic_sds_controller *scic; - sci_dev = container_of(base_dev, typeof(*sci_dev), parent); scic = scic_sds_remote_device_get_controller(sci_dev); scic_sds_controller_free_remote_node_context(scic, sci_dev, sci_dev->rnc->remote_node_index); sci_dev->rnc->remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - sci_base_state_machine_change_state(&base_dev->state_machine, + sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_FINAL); return SCI_SUCCESS; @@ -945,11 +938,8 @@ static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( * ***************************************************************************** */ static enum sci_status scic_sds_remote_device_starting_state_stop_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - struct scic_sds_remote_device *sci_dev; - - sci_dev = container_of(base_dev, typeof(*sci_dev), parent); /* * This device has not yet started so there had better be no IO requests */ @@ -965,21 +955,19 @@ static enum sci_status scic_sds_remote_device_starting_state_stop_handler( * Transition to the stopping state and wait for the remote node to * complete being posted and invalidated. */ - sci_base_state_machine_change_state(&base_dev->state_machine, + sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); return SCI_SUCCESS; } enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - struct scic_sds_remote_device *sci_dev; enum sci_status status = SCI_SUCCESS; - sci_dev = container_of(base_dev, typeof(*sci_dev), parent); /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state(&base_dev->state_machine, + sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); if (sci_dev->started_request_count == 0) { @@ -994,19 +982,16 @@ enum sci_status scic_sds_remote_device_ready_state_stop_handler( /** * - * @device: The struct sci_base_remote_device object which is cast to a + * @device: The struct scic_sds_remote_device object which is cast to a * struct scic_sds_remote_device object. * * This is the ready state device reset handler enum sci_status */ enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct sci_base_remote_device *base_dev) + struct scic_sds_remote_device *sci_dev) { - struct scic_sds_remote_device *sci_dev; - - sci_dev = container_of(base_dev, typeof(*sci_dev), parent); /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state(&base_dev->state_machine, + sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); return SCI_SUCCESS; @@ -1021,23 +1006,22 @@ enum sci_status scic_sds_remote_device_ready_state_reset_handler( * object could not get the resources to start. */ static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status result; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; /* See if the port is in a state where we can start the IO request */ result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(this_device), this_device, request); + scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (result == SCI_SUCCESS) { result = scic_sds_remote_node_context_start_task( - this_device->rnc, request); + sci_dev->rnc, request); if (result == SCI_SUCCESS) result = scic_sds_request_start(request); - scic_sds_remote_device_start_request(this_device, request, result); + scic_sds_remote_device_start_request(sci_dev, request, result); } return result; @@ -1052,23 +1036,22 @@ static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( * object could not get the resources to start. */ static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status result; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; /* See if the port is in a state where we can start the IO request */ result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(this_device), this_device, request); + scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (result == SCI_SUCCESS) { result = scic_sds_remote_node_context_start_io( - this_device->rnc, request); + sci_dev->rnc, request); if (result == SCI_SUCCESS) result = scic_sds_request_start(request); - scic_sds_remote_device_start_request(this_device, request, result); + scic_sds_remote_device_start_request(sci_dev, request, result); } return result; @@ -1081,23 +1064,24 @@ static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( * its own started_request_count. enum sci_status */ static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status result; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; result = scic_sds_request_complete(request); - if (result == SCI_SUCCESS) { - /* See if the port is in a state where we can start the IO request */ - result = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(this_device), this_device, request); + if (result != SCI_SUCCESS) + return result; - if (result == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(this_device); - } - } + /* See if the port is in a state + * where we can start the IO request */ + result = scic_sds_port_complete_io( + scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); + + if (result == SCI_SUCCESS) + scic_sds_remote_device_decrement_request_count(sci_dev); return result; } @@ -1109,7 +1093,7 @@ static enum sci_status scic_sds_remote_device_ready_state_complete_request_handl /** * - * @this_device: The struct sci_base_remote_device which is cast into a + * @this_device: The struct scic_sds_remote_device which is cast into a * struct scic_sds_remote_device. * * This method will stop a struct scic_sds_remote_device that is already in the @@ -1118,14 +1102,13 @@ static enum sci_status scic_sds_remote_device_ready_state_complete_request_handl * stopped. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( - struct sci_base_remote_device *device) + struct scic_sds_remote_device *device) { /* * All requests should have been terminated, but if there is an * attempt to stop a device already in the stopping state, then * try again to terminate. */ - return scic_sds_remote_device_terminate_requests( - (struct scic_sds_remote_device *)device); + return scic_sds_remote_device_terminate_requests(device); } @@ -1143,54 +1126,44 @@ static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status */ static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status status = SCI_SUCCESS; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; status = scic_sds_request_complete(request); - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(this_device), - this_device, request); - if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(this_device); - - if (scic_sds_remote_device_get_request_count(this_device) == 0) { - scic_sds_remote_node_context_destruct( - this_device->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, - this_device - ); - } - } - } + if (status != SCI_SUCCESS) + return status; - return status; -} + status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); + if (status != SCI_SUCCESS) + return status; -/* - * ***************************************************************************** - * * RESETTING STATE HANDLERS - * ***************************************************************************** */ + scic_sds_remote_device_decrement_request_count(sci_dev); + + if (scic_sds_remote_device_get_request_count(sci_dev) == 0) + scic_sds_remote_node_context_destruct(sci_dev->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, + sci_dev); + return SCI_SUCCESS; +} /** * - * @device: The struct sci_base_remote_device which is to be cast into a + * @device: The struct scic_sds_remote_device which is to be cast into a * struct scic_sds_remote_device object. * * This method will complete the reset operation when the device is in the * resetting state. enum sci_status */ static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( - struct sci_base_remote_device *device) + struct scic_sds_remote_device *sci_dev) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; sci_base_state_machine_change_state( - &this_device->parent.state_machine, + &sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_READY ); @@ -1199,19 +1172,17 @@ static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_han /** * - * @device: The struct sci_base_remote_device which is to be cast into a + * @device: The struct scic_sds_remote_device which is to be cast into a * struct scic_sds_remote_device object. * * This method will stop the remote device while in the resetting state. * enum sci_status */ static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( - struct sci_base_remote_device *device) + struct scic_sds_remote_device *sci_dev) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; - sci_base_state_machine_change_state( - &this_device->parent.state_machine, + &sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING ); @@ -1226,20 +1197,20 @@ static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( * completes the task request. enum sci_status */ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status status = SCI_SUCCESS; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; status = scic_sds_request_complete(request); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(this_device), this_device, request); + scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(this_device); + scic_sds_remote_device_decrement_request_count(sci_dev); } } @@ -1253,7 +1224,7 @@ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_h /** * - * @device: The struct sci_base_remote_device which is to be cast into a + * @device: The struct scic_sds_remote_device which is to be cast into a * struct scic_sds_remote_device object. * * This method handles the remove request for a failed struct scic_sds_remote_device @@ -1265,140 +1236,140 @@ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_h static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_default_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .parent.start_handler = scic_sds_remote_device_stopped_state_start_handler, - .parent.stop_handler = scic_sds_remote_device_stopped_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler + .start_handler = scic_sds_remote_device_stopped_state_start_handler, + .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_starting_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_starting_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, - .parent.complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, - .parent.complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler, + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, + .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, + .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_stopping_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_default_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_resetting_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_default_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler } }; @@ -1415,12 +1386,12 @@ static void scic_sds_remote_device_initial_state_enter( { struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - sci_dev = container_of(object, typeof(*sci_dev), parent.parent); + sci_dev = container_of(object, typeof(*sci_dev), parent); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); /* Initial state is a transitional state to the stopped state */ - sci_base_state_machine_change_state(&sci_dev->parent.state_machine, + sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); } @@ -1443,7 +1414,7 @@ static void scic_sds_remote_device_stopped_state_enter( struct isci_host *ihost; u32 prev_state; - sci_dev = container_of(object, typeof(*sci_dev), parent.parent); + sci_dev = container_of(object, typeof(*sci_dev), parent); scic = scic_sds_remote_device_get_controller(sci_dev); ihost = sci_object_get_association(scic); idev = sci_object_get_association(sci_dev); @@ -1454,7 +1425,7 @@ static void scic_sds_remote_device_stopped_state_enter( /* If we are entering from the stopping state let the SCI User know that * the stop operation has completed. */ - prev_state = sci_dev->parent.state_machine.previous_state_id; + prev_state = sci_dev->state_machine.previous_state_id; if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) isci_remote_device_stop_complete(ihost, idev, SCI_SUCCESS); @@ -1473,7 +1444,7 @@ static void scic_sds_remote_device_stopped_state_enter( static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); @@ -1488,7 +1459,7 @@ static void scic_sds_remote_device_starting_state_enter(struct sci_base_object * static void scic_sds_remote_device_starting_state_exit(struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); @@ -1511,7 +1482,7 @@ static void scic_sds_remote_device_starting_state_exit(struct sci_base_object *o static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); @@ -1540,7 +1511,7 @@ static void scic_sds_remote_device_ready_state_exit( struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); if (sci_dev->has_ready_substate_machine) sci_base_state_machine_stop(&sci_dev->ready_substate_machine); else { @@ -1691,10 +1662,17 @@ void scic_remote_device_construct(struct scic_sds_port *sci_port, sci_dev->owning_port = sci_port; sci_dev->started_request_count = 0; sci_dev->rnc = (struct scic_sds_remote_node_context *) &sci_dev[1]; + sci_dev->parent.private = NULL; - sci_base_remote_device_construct( + sci_base_state_machine_construct( + &sci_dev->state_machine, &sci_dev->parent, - scic_sds_remote_device_state_table + scic_sds_remote_device_state_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL + ); + + sci_base_state_machine_start( + &sci_dev->state_machine ); scic_sds_remote_node_context_construct( diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index 90b2318..0e8bb0f 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -56,22 +56,74 @@ #ifndef _SCIC_SDS_REMOTE_DEVICE_H_ #define _SCIC_SDS_REMOTE_DEVICE_H_ +#include "intel_sas.h" +#include "scu_remote_node_context.h" +#include "scic_sds_remote_node_context.h" + /** - * This file contains the structures, constants, and prototypes for the - * struct scic_sds_remote_device object. + * enum scic_sds_remote_device_states - This enumeration depicts all the states + * for the common remote device state machine. * * */ +enum scic_sds_remote_device_states { + /** + * Simply the initial state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL, -#include "intel_sas.h" -#include "sci_base_remote_device.h" -#include "scu_remote_node_context.h" -#include "scic_sds_remote_node_context.h" + /** + * This state indicates that the remote device has successfully been + * stopped. In this state no new IO operations are permitted. + * This state is entered from the INITIAL state. + * This state is entered from the STOPPING state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED, + + /** + * This state indicates the the remote device is in the process of + * becoming ready (i.e. starting). In this state no new IO operations + * are permitted. + * This state is entered from the STOPPED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STARTING, + + /** + * This state indicates the remote device is now ready. Thus, the user + * is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_READY, + + /** + * This state indicates that the remote device is in the process of + * stopping. In this state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, + + /** + * This state indicates that the remote device has failed. + * In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FAILED, -struct scic_sds_controller; -struct scic_sds_port; -struct scic_sds_request; -struct scic_sds_remote_device_state_handler; + /** + * This state indicates the device is being reset. + * In this state no new IO operations are permitted. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, + + /** + * Simply the final state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FINAL, +}; /** * enum scic_sds_ssp_remote_device_ready_substates - @@ -186,14 +238,21 @@ enum scic_sds_smp_remote_device_ready_substates { */ struct scic_sds_remote_device { /** - * This field is the common base for all remote device objects. + * The field specifies that the parent object for the base remote + * device is the base object itself. + */ + struct sci_base_object parent; + + /** + * This field contains the information for the base remote device state + * machine. */ - struct sci_base_remote_device parent; + struct sci_base_state_machine state_machine; /** - * This field is the programmed device port width. This value is written to - * the RCN data structure to tell the SCU how many open connections this - * device can have. + * This field is the programmed device port width. This value is + * written to the RCN data structure to tell the SCU how many open + * connections this device can have. */ u32 device_port_width; @@ -279,6 +338,16 @@ struct scic_sds_remote_device { const struct scic_sds_remote_device_state_handler *state_handlers; }; +typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_handler_t)( + struct scic_sds_remote_device *device, + struct scic_sds_request *request, + void *, + enum sci_io_status); + typedef enum sci_status (*scic_sds_remote_device_handler_t)( struct scic_sds_remote_device *this_device); @@ -308,7 +377,74 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( * */ struct scic_sds_remote_device_state_handler { - struct sci_base_remote_device_state_handler parent; + /** + * The start_handler specifies the method invoked when a user + * attempts to start a remote device. + */ + scic_sds_remote_device_handler_t start_handler; + + /** + * The stop_handler specifies the method invoked when a user attempts to + * stop a remote device. + */ + scic_sds_remote_device_handler_t stop_handler; + + /** + * The fail_handler specifies the method invoked when a remote device + * failure has occurred. A failure may be due to an inability to + * initialize/configure the device. + */ + scic_sds_remote_device_handler_t fail_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a remote device. + */ + scic_sds_remote_device_handler_t destruct_handler; + + /** + * The reset handler specifies the method invloked when requesting to + * reset a remote device. + */ + scic_sds_remote_device_handler_t reset_handler; + + /** + * The reset complete handler specifies the method invloked when + * reporting that a reset has completed to the remote device. + */ + scic_sds_remote_device_handler_t reset_complete_handler; + + /** + * The start_io_handler specifies the method invoked when a user + * attempts to start an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t start_io_handler; + + /** + * The complete_io_handler specifies the method invoked when a user + * attempts to complete an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t complete_io_handler; + + /** + * The continue_io_handler specifies the method invoked when a user + * attempts to continue an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t continue_io_handler; + + /** + * The start_task_handler specifies the method invoked when a user + * attempts to start a task management request for a remote device. + */ + scic_sds_remote_device_request_handler_t start_task_handler; + + /** + * The complete_task_handler specifies the method invoked when a user + * attempts to complete a task management request for a remote device. + */ + scic_sds_remote_device_request_handler_t complete_task_handler; + + scic_sds_remote_device_suspend_handler_t suspend_handler; scic_sds_remote_device_resume_handler_t resume_handler; scic_sds_remote_device_event_handler_t event_handler; @@ -490,30 +626,30 @@ void scic_sds_remote_device_start_request( void scic_sds_remote_device_continue_request(void *sci_dev); enum sci_status scic_sds_remote_device_default_start_handler( - struct sci_base_remote_device *this_device); + struct scic_sds_remote_device *this_device); enum sci_status scic_sds_remote_device_default_fail_handler( - struct sci_base_remote_device *this_device); + struct scic_sds_remote_device *this_device); enum sci_status scic_sds_remote_device_default_destruct_handler( - struct sci_base_remote_device *this_device); + struct scic_sds_remote_device *this_device); enum sci_status scic_sds_remote_device_default_reset_handler( - struct sci_base_remote_device *device); + struct scic_sds_remote_device *device); enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct sci_base_remote_device *device); + struct scic_sds_remote_device *device); enum sci_status scic_sds_remote_device_default_start_request_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request); enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request); enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request); enum sci_status scic_sds_remote_device_default_suspend_handler( @@ -529,10 +665,10 @@ enum sci_status scic_sds_remote_device_default_frame_handler( u32 frame_index); enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct sci_base_remote_device *device); + struct scic_sds_remote_device *device); enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct sci_base_remote_device *device); + struct scic_sds_remote_device *device); enum sci_status scic_sds_remote_device_general_frame_handler( struct scic_sds_remote_device *this_device, diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index 040a3d8..88c3595 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -77,33 +77,32 @@ * the idle state. enum sci_status */ static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request) { enum sci_status status; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; /* Will the port allow the io request to start? */ - status = this_device->owning_port->state_handlers->start_io_handler( - this_device->owning_port, this_device, request); + status = device->owning_port->state_handlers->start_io_handler( + device->owning_port, device, request); if (status == SCI_SUCCESS) { - status = - scic_sds_remote_node_context_start_io(this_device->rnc, request); + status = scic_sds_remote_node_context_start_io( + device->rnc, request); if (status == SCI_SUCCESS) status = scic_sds_request_start(request); if (status == SCI_SUCCESS) { - this_device->working_request = request; + device->working_request = request; sci_base_state_machine_change_state( - &this_device->ready_substate_machine, + &device->ready_substate_machine, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD ); } - scic_sds_remote_device_start_request(this_device, request, status); + scic_sds_remote_device_start_request(device, request, status); } return status; @@ -123,7 +122,7 @@ static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_h * until this one is complete. enum sci_status */ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request) { return SCI_FAILURE_INVALID_STATE; @@ -137,38 +136,37 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_ha * * enum sci_status */ -static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( - struct sci_base_remote_device *device, +static enum sci_status +scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( + struct scic_sds_remote_device *device, struct scic_sds_request *request) { enum sci_status status; - struct scic_sds_remote_device *this_device; struct scic_sds_request *the_request; - this_device = (struct scic_sds_remote_device *)device; the_request = (struct scic_sds_request *)request; status = scic_sds_io_request_complete(the_request); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( - this_device->owning_port, this_device, the_request); + device->owning_port, device, the_request); if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(this_device); + scic_sds_remote_device_decrement_request_count(device); sci_base_state_machine_change_state( - &this_device->ready_substate_machine, + &device->ready_substate_machine, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE ); } else - dev_err(scirdev_to_dev(this_device), + dev_err(scirdev_to_dev(device), "%s: SCIC SDS Remote Device 0x%p io request " "0x%p could not be completd on the port 0x%p " "failed with status %d.\n", __func__, - this_device, + device, the_request, - this_device->owning_port, + device->owning_port, status); } @@ -204,38 +202,38 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[] = { [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, - .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_default_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, - .parent.complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, + .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler } }; @@ -251,7 +249,7 @@ static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_dev static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); @@ -276,7 +274,7 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter( struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); @@ -301,7 +299,7 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter( static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); sci_dev->working_request = NULL; } diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index bb58249..a5b1fe3 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -77,20 +77,19 @@ * completed successfully. */ static enum sci_status scic_sds_stp_remote_device_complete_request( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; enum sci_status status; status = scic_sds_io_request_complete(request); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( - this_device->owning_port, this_device, request); + device->owning_port, device, request); if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(this_device); + scic_sds_remote_device_decrement_request_count(device); if (request->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { /* * This request causes hardware error, device needs to be Lun Reset. @@ -98,12 +97,12 @@ static enum sci_status scic_sds_stp_remote_device_complete_request( * can reach RNC state handler, these IOs will be completed by RNC with * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ sci_base_state_machine_change_state( - &this_device->ready_substate_machine, + &device->ready_substate_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET ); - } else if (scic_sds_remote_device_get_request_count(this_device) == 0) { + } else if (scic_sds_remote_device_get_request_count(device) == 0) { sci_base_state_machine_change_state( - &this_device->ready_substate_machine, + &device->ready_substate_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE ); } @@ -111,12 +110,12 @@ static enum sci_status scic_sds_stp_remote_device_complete_request( } if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(this_device), + dev_err(scirdev_to_dev(device), "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " "could not complete\n", __func__, - this_device->owning_port, - this_device, + device->owning_port, + device, request, status); @@ -140,19 +139,18 @@ static enum sci_status scic_sds_stp_remote_device_complete_request( * callback will be called. */ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request) { enum sci_status status; - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; /* Will the port allow the io request to start? */ - status = this_device->owning_port->state_handlers->start_io_handler( - this_device->owning_port, this_device, request); + status = device->owning_port->state_handlers->start_io_handler( + device->owning_port, device, request); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_task(this_device->rnc, request); + status = scic_sds_remote_node_context_start_task(device->rnc, request); if (status != SCI_SUCCESS) goto out; @@ -164,8 +162,8 @@ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_h * Note: If the remote device state is not IDLE this will replace * the request that probably resulted in the task management request. */ - this_device->working_request = request; - sci_base_state_machine_change_state(&this_device->ready_substate_machine, + device->working_request = request; + sci_base_state_machine_change_state(&device->ready_substate_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); /* @@ -175,14 +173,14 @@ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_h * remote node context state machine will take the correct action when * the remote node context is suspended and later resumed. */ - scic_sds_remote_node_context_suspend(this_device->rnc, + scic_sds_remote_node_context_suspend(device->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); - scic_sds_remote_node_context_resume(this_device->rnc, + scic_sds_remote_node_context_resume(device->rnc, scic_sds_remote_device_continue_request, - this_device); + device); out: - scic_sds_remote_device_start_request(this_device, request, status); + scic_sds_remote_device_start_request(device, request, status); /* * We need to let the controller start request handler know that it can't * post TC yet. We will provide a callback function to post TC when RNC gets @@ -208,23 +206,21 @@ out: * enum sci_status */ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( - struct sci_base_remote_device *base_device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status status; - struct scic_sds_remote_device *device = - (struct scic_sds_remote_device *)&base_device->parent; struct isci_request *isci_request = (struct isci_request *)sci_object_get_association(request); /* Will the port allow the io request to start? */ - status = device->owning_port->state_handlers->start_io_handler( - device->owning_port, device, request); + status = sci_dev->owning_port->state_handlers->start_io_handler( + sci_dev->owning_port, sci_dev, request); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(device->rnc, request); + status = scic_sds_remote_node_context_start_io(sci_dev->rnc, request); if (status != SCI_SUCCESS) goto out; @@ -233,15 +229,15 @@ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_h goto out; if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { - sci_base_state_machine_change_state(&device->ready_substate_machine, + sci_base_state_machine_change_state(&sci_dev->ready_substate_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); } else { - device->working_request = request; - sci_base_state_machine_change_state(&device->ready_substate_machine, + sci_dev->working_request = request; + sci_base_state_machine_change_state(&sci_dev->ready_substate_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); } out: - scic_sds_remote_device_start_request(device, request, status); + scic_sds_remote_device_start_request(sci_dev, request, status); return status; } @@ -281,30 +277,28 @@ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_hand * ***************************************************************************** */ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( - struct sci_base_remote_device *base_device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { enum sci_status status; - struct scic_sds_remote_device *device = - (struct scic_sds_remote_device *)&base_device->parent; struct isci_request *isci_request = (struct isci_request *)sci_object_get_association(request); if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { - status = device->owning_port->state_handlers->start_io_handler( - device->owning_port, - device, + status = sci_dev->owning_port->state_handlers->start_io_handler( + sci_dev->owning_port, + sci_dev, request); if (status == SCI_SUCCESS) { status = scic_sds_remote_node_context_start_io( - device->rnc, + sci_dev->rnc, request); if (status == SCI_SUCCESS) status = request->state_handlers->start_handler(request); - scic_sds_remote_device_start_request(device, + scic_sds_remote_device_start_request(sci_dev, request, status); } @@ -392,7 +386,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl * enum sci_status */ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request) { return SCI_FAILURE_INVALID_STATE; @@ -445,7 +439,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handl * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE HANDLERS * ***************************************************************************** */ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request) { return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; @@ -464,10 +458,9 @@ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_sta * completed successfully. */ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( - struct sci_base_remote_device *device, + struct scic_sds_remote_device *device, struct scic_sds_request *request) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)device; struct scic_sds_request *the_request = (struct scic_sds_request *)request; enum sci_status status; @@ -475,20 +468,20 @@ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_com if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( - this_device->owning_port, this_device, the_request + device->owning_port, device, the_request ); if (status == SCI_SUCCESS) - scic_sds_remote_device_decrement_request_count(this_device); + scic_sds_remote_device_decrement_request_count(device); } if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(this_device), + dev_err(scirdev_to_dev(device), "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " "could not complete\n", __func__, - this_device->owning_port, - this_device, + device->owning_port, + device, the_request, status); @@ -538,68 +531,68 @@ enum sci_status scic_sds_stp_remote_device_ready_atapi_error_substate_event_hand static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = { [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, - .parent.complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .parent.complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, - .parent.complete_io_handler = scic_sds_stp_remote_device_complete_request, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, - .parent.complete_io_handler = scic_sds_stp_remote_device_complete_request, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_stp_remote_device_complete_request, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, @@ -607,17 +600,17 @@ static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_dev }, #if !defined(DISABLE_ATAPI) [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_remote_device_default_start_request_handler, - .parent.complete_io_handler = scic_sds_stp_remote_device_complete_request, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler, @@ -625,17 +618,17 @@ static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_dev }, #endif [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .parent.start_handler = scic_sds_remote_device_default_start_handler, - .parent.stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .parent.fail_handler = scic_sds_remote_device_default_fail_handler, - .parent.destruct_handler = scic_sds_remote_device_default_destruct_handler, - .parent.reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .parent.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .parent.start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, - .parent.complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, - .parent.continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .parent.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .parent.complete_task_handler = scic_sds_stp_remote_device_complete_request, + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, @@ -711,7 +704,7 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter( static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); @@ -729,7 +722,7 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_ static void scic_sds_stp_remote_device_ready_ncq_substate_enter(struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); SET_STATE_HANDLER(sci_dev, scic_sds_stp_remote_device_ready_substate_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); @@ -738,7 +731,7 @@ static void scic_sds_stp_remote_device_ready_ncq_substate_enter(struct sci_base_ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_object *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent.parent); + parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = sci_object_get_association(scic); struct isci_remote_device *idev = sci_object_get_association(sci_dev); -- cgit v0.10.2 From 41e2b90584695cf5ae3a29eaa115e31913fbefe0 Mon Sep 17 00:00:00 2001 From: Maciej Trela Date: Tue, 12 Apr 2011 17:28:37 -0700 Subject: isci: remove base_port abstraction Merge struct sci_base_port into scic_sds_port. Until now sci_base_port was referenced indirectly with scic_sds_port->parent field. 'sci_base_port' state machine handlers were also incorporated into scic_sds_port handlers. Reported-by: Christoph Hellwig Signed-off-by: Maciej Trela Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_port.h b/drivers/scsi/isci/core/sci_base_port.h deleted file mode 100644 index 252d48c..0000000 --- a/drivers/scsi/isci/core/sci_base_port.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_PORT_H_ -#define _SCI_BASE_PORT_H_ - -#include "sci_base_state_machine.h" -#include "sci_object.h" - -/** - * enum sci_base_port_states - This enumeration depicts all the states for the - * common port state machine. - * - * - */ -enum sci_base_port_states { - /** - * This state indicates that the port has successfully been stopped. - * In this state no new IO operations are permitted. - * This state is entered from the STOPPING state. - */ - SCI_BASE_PORT_STATE_STOPPED, - - /** - * This state indicates that the port is in the process of stopping. - * In this state no new IO operations are permitted, but existing IO - * operations are allowed to complete. - * This state is entered from the READY state. - */ - SCI_BASE_PORT_STATE_STOPPING, - - /** - * This state indicates the port is now ready. Thus, the user is - * able to perform IO operations on this port. - * This state is entered from the STARTING state. - */ - SCI_BASE_PORT_STATE_READY, - - /** - * This state indicates the port is in the process of performing a hard - * reset. Thus, the user is unable to perform IO operations on this - * port. - * This state is entered from the READY state. - */ - SCI_BASE_PORT_STATE_RESETTING, - - /** - * This state indicates the port has failed a reset request. This state - * is entered when a port reset request times out. - * This state is entered from the RESETTING state. - */ - SCI_BASE_PORT_STATE_FAILED, - - SCI_BASE_PORT_MAX_STATES - -}; - -/** - * struct sci_base_port - The base port object abstracts the fields common to - * all SCI port objects. - * - * - */ -struct sci_base_port { - /** - * The field specifies that the parent object for the base controller - * is the base object itself. - */ - struct sci_base_object parent; - - /** - * This field contains the information for the base port state machine. - */ - struct sci_base_state_machine state_machine; -}; - -struct sci_base_phy; - -typedef enum sci_status (*sci_base_port_handler_t) ( - struct sci_base_port *); - -typedef enum sci_status (*sci_base_port_phy_handler_t) ( - struct sci_base_port *, - struct sci_base_phy *); - -typedef enum sci_status (*sci_base_port_reset_handler_t) ( - struct sci_base_port *, - u32 timeout); - -/** - * struct sci_base_port_state_handler - This structure contains all of the - * state handler methods common to base port state machines. Handler - * methods provide the ability to change the behavior for user requests or - * transitions depending on the state the machine is in. - * - * - */ -struct sci_base_port_state_handler { - /** - * The start_handler specifies the method invoked when a user - * attempts to start a port. - */ - sci_base_port_handler_t start_handler; - - /** - * The stop_handler specifies the method invoked when a user - * attempts to stop a port. - */ - sci_base_port_handler_t stop_handler; - - /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a port. - */ - sci_base_port_handler_t destruct_handler; - - /** - * The reset_handler specifies the method invoked when a user - * attempts to hard reset a port. - */ - sci_base_port_reset_handler_t reset_handler; - - /** - * The add_phy_handler specifies the method invoked when a user - * attempts to add another phy into the port. - */ - sci_base_port_phy_handler_t add_phy_handler; - - /** - * The remove_phy_handler specifies the method invoked when a user - * attempts to remove a phy from the port. - */ - sci_base_port_phy_handler_t remove_phy_handler; -}; -#endif /* _SCI_BASE_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 7a0c590..577d1df 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -616,10 +616,10 @@ static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller for (index = 0; index < scic->logical_port_entries; index++) { struct scic_sds_port *sci_port = &scic->port_table[index]; - sci_base_port_handler_t stop; + scic_sds_port_handler_t stop; - stop = sci_port->state_handlers->parent.stop_handler; - port_status = stop(&sci_port->parent); + stop = sci_port->state_handlers->stop_handler; + port_status = stop(sci_port); if ((port_status != SCI_SUCCESS) && (port_status != SCI_FAILURE_INVALID_STATE)) { @@ -2860,8 +2860,8 @@ enum sci_status scic_controller_start(struct scic_sds_controller *scic, for (index = 0; index < scic->logical_port_entries; index++) { struct scic_sds_port *sci_port = &scic->port_table[index]; - result = sci_port->state_handlers->parent.start_handler( - &sci_port->parent); + result = sci_port->state_handlers->start_handler( + sci_port); if (result) return result; } diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index ef9cb9e..ff9ac73 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -54,7 +54,6 @@ */ #include "intel_sas.h" -#include "sci_base_port.h" #include "scic_controller.h" #include "scic_phy.h" #include "scic_port.h" @@ -73,22 +72,6 @@ #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) #define SCU_DUMMY_INDEX (0xFFFF) -static void sci_base_port_construct( - struct sci_base_port *base_port, - const struct sci_base_state *state_table) -{ - base_port->parent.private = NULL; - sci_base_state_machine_construct( - &base_port->state_machine, - &base_port->parent, - state_table, - SCI_BASE_PORT_STATE_STOPPED - ); - - sci_base_state_machine_start( - &base_port->state_machine - ); -} /** * @@ -332,8 +315,8 @@ enum sci_status scic_sds_port_add_phy( struct scic_sds_port *this_port, struct scic_sds_phy *the_phy) { - return this_port->state_handlers->parent.add_phy_handler( - &this_port->parent, &the_phy->parent); + return this_port->state_handlers->add_phy_handler( + this_port, &the_phy->parent); } @@ -350,8 +333,8 @@ enum sci_status scic_sds_port_remove_phy( struct scic_sds_port *this_port, struct scic_sds_phy *the_phy) { - return this_port->state_handlers->parent.remove_phy_handler( - &this_port->parent, &the_phy->parent); + return this_port->state_handlers->remove_phy_handler( + this_port, &the_phy->parent); } /** @@ -632,8 +615,8 @@ enum sci_status scic_port_hard_reset( struct scic_sds_port *port, u32 reset_timeout) { - return port->state_handlers->parent.reset_handler( - &port->parent, reset_timeout); + return port->state_handlers->reset_handler( + port, reset_timeout); } /** @@ -768,7 +751,7 @@ static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port if ((phy_sas_address.high == port_sas_address.high && phy_sas_address.low == port_sas_address.low) || sci_port->active_phy_mask == 0) { - struct sci_base_state_machine *sm = &sci_port->parent.state_machine; + struct sci_base_state_machine *sm = &sci_port->state_machine; scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user); if (sm->current_state_id == SCI_BASE_PORT_STATE_RESETTING) @@ -913,7 +896,7 @@ static void scic_sds_port_timeout_handler(void *port) u32 current_state; current_state = sci_base_state_machine_get_state( - &sci_port->parent.state_machine); + &sci_port->state_machine); if (current_state == SCI_BASE_PORT_STATE_RESETTING) { /* @@ -921,7 +904,7 @@ static void scic_sds_port_timeout_handler(void *port) * timeout fired before the reset completed. */ sci_base_state_machine_change_state( - &sci_port->parent.state_machine, + &sci_port->state_machine, SCI_BASE_PORT_STATE_FAILED); } else if (current_state == SCI_BASE_PORT_STATE_STOPPED) { /* @@ -1068,22 +1051,16 @@ void scic_port_enable_broadcast_change_notification( * * READY SUBSTATE HANDLERS * **************************************************************************** */ -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * +/* * This method is the general ready state stop handler for the struct scic_sds_port * object. This function will transition the ready substate machine to its * final state. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_port_ready_substate_stop_handler( - struct sci_base_port *port) + struct scic_sds_port *port) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; - sci_base_state_machine_change_state( - &this_port->parent.state_machine, + &port->state_machine, SCI_BASE_PORT_STATE_STOPPING ); @@ -1100,30 +1077,27 @@ static enum sci_status scic_sds_port_ready_substate_complete_io_handler( struct scic_sds_remote_device *device, struct scic_sds_request *io_request) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; - - scic_sds_port_decrement_request_count(this_port); + scic_sds_port_decrement_request_count(port); return SCI_SUCCESS; } static enum sci_status scic_sds_port_ready_substate_add_phy_handler( - struct sci_base_port *port, + struct scic_sds_port *port, struct sci_base_phy *phy) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; enum sci_status status; - status = scic_sds_port_set_phy(this_port, this_phy); + status = scic_sds_port_set_phy(port, this_phy); if (status == SCI_SUCCESS) { - scic_sds_port_general_link_up_handler(this_port, this_phy, true); + scic_sds_port_general_link_up_handler(port, this_phy, true); - this_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; sci_base_state_machine_change_state( - &this_port->ready_substate_machine, + &port->ready_substate_machine, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING ); } @@ -1133,22 +1107,21 @@ static enum sci_status scic_sds_port_ready_substate_add_phy_handler( static enum sci_status scic_sds_port_ready_substate_remove_phy_handler( - struct sci_base_port *port, + struct scic_sds_port *port, struct sci_base_phy *phy) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; enum sci_status status; - status = scic_sds_port_clear_phy(this_port, this_phy); + status = scic_sds_port_clear_phy(port, this_phy); if (status == SCI_SUCCESS) { - scic_sds_port_deactivate_phy(this_port, this_phy, true); + scic_sds_port_deactivate_phy(port, this_phy, true); - this_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; sci_base_state_machine_change_state( - &this_port->ready_substate_machine, + &port->ready_substate_machine, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING ); } @@ -1204,22 +1177,16 @@ static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler( * * READY SUBSTATE OPERATIONAL HANDLERS * **************************************************************************** */ -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * @timeout: This is the timeout for the reset request to complete. - * +/* * This method will casue the port to reset. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_port_ready_operational_substate_reset_handler( - struct sci_base_port *port, + struct scic_sds_port *port, u32 timeout) { enum sci_status status = SCI_FAILURE_INVALID_PHY; u32 phy_index; - struct scic_sds_port *sci_port = (struct scic_sds_port *)port; struct scic_sds_phy *selected_phy = NULL; @@ -1227,10 +1194,10 @@ sci_status scic_sds_port_ready_operational_substate_reset_handler( for (phy_index = 0; (phy_index < SCI_MAX_PHYS) && (selected_phy == NULL); phy_index++) { - selected_phy = sci_port->phy_table[phy_index]; + selected_phy = port->phy_table[phy_index]; if ((selected_phy != NULL) && - !scic_sds_port_active_phy(sci_port, selected_phy)) { + !scic_sds_port_active_phy(port, selected_phy)) { /* * We found a phy but it is not ready select * different phy @@ -1244,12 +1211,12 @@ sci_status scic_sds_port_ready_operational_substate_reset_handler( status = scic_sds_phy_reset(selected_phy); if (status == SCI_SUCCESS) { - isci_timer_start(sci_port->timer_handle, timeout); - sci_port->not_ready_reason = + isci_timer_start(port->timer_handle, timeout); + port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; sci_base_state_machine_change_state( - &sci_port->parent.state_machine, + &port->state_machine, SCI_BASE_PORT_STATE_RESETTING); } } @@ -1310,9 +1277,7 @@ static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler struct scic_sds_remote_device *device, struct scic_sds_request *io_request) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; - - scic_sds_port_increment_request_count(this_port); + scic_sds_port_increment_request_count(port); return SCI_SUCCESS; } @@ -1322,32 +1287,27 @@ static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler * * READY SUBSTATE OPERATIONAL HANDLERS * **************************************************************************** */ -/** - * scic_sds_port_ready_configuring_substate_add_phy_handler() - - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * +/* * This is the default method for a port add phy request. It will report a * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE */ static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( - struct sci_base_port *port, + struct scic_sds_port *port, struct sci_base_phy *phy) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; enum sci_status status; - status = scic_sds_port_set_phy(this_port, this_phy); + status = scic_sds_port_set_phy(port, this_phy); if (status == SCI_SUCCESS) { - scic_sds_port_general_link_up_handler(this_port, this_phy, true); + scic_sds_port_general_link_up_handler(port, this_phy, true); /* * Re-enter the configuring state since this may be the last phy in * the port. */ sci_base_state_machine_change_state( - &this_port->ready_substate_machine, + &port->ready_substate_machine, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING ); } @@ -1355,32 +1315,27 @@ static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( return status; } -/** - * scic_sds_port_ready_configuring_substate_remove_phy_handler() - - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * +/* * This is the default method for a port remove phy request. It will report a * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE */ static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handler( - struct sci_base_port *port, + struct scic_sds_port *port, struct sci_base_phy *phy) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; enum sci_status status; - status = scic_sds_port_clear_phy(this_port, this_phy); + status = scic_sds_port_clear_phy(port, this_phy); if (status == SCI_SUCCESS) { - scic_sds_port_deactivate_phy(this_port, this_phy, true); + scic_sds_port_deactivate_phy(port, this_phy, true); /* * Re-enter the configuring state since this may be the last phy in * the port. */ sci_base_state_machine_change_state( - &this_port->ready_substate_machine, + &port->ready_substate_machine, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING ); } @@ -1397,7 +1352,8 @@ static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handl * the request count goes to 0 then the port can be reprogrammed with its new * phy data. */ -static enum sci_status scic_sds_port_ready_configuring_substate_complete_io_handler( +static enum sci_status +scic_sds_port_ready_configuring_substate_complete_io_handler( struct scic_sds_port *port, struct scic_sds_remote_device *device, struct scic_sds_request *io_request) @@ -1414,66 +1370,67 @@ static enum sci_status scic_sds_port_ready_configuring_substate_complete_io_hand return SCI_SUCCESS; } -static enum sci_status default_port_handler(struct sci_base_port *base_port, const char *func) +static enum sci_status default_port_handler(struct scic_sds_port *sci_port, + const char *func) { - struct scic_sds_port *sci_port; - - sci_port = container_of(base_port, typeof(*sci_port), parent); dev_warn(sciport_to_dev(sci_port), "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&base_port->state_machine)); + sci_base_state_machine_get_state(&sci_port->state_machine)); return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_port_default_start_handler(struct sci_base_port *base_port) +static enum sci_status +scic_sds_port_default_start_handler(struct scic_sds_port *sci_port) { - return default_port_handler(base_port, __func__); + return default_port_handler(sci_port, __func__); } -static enum sci_status scic_sds_port_default_stop_handler(struct sci_base_port *base_port) +static enum sci_status +scic_sds_port_default_stop_handler(struct scic_sds_port *sci_port) { - return default_port_handler(base_port, __func__); + return default_port_handler(sci_port, __func__); } -static enum sci_status scic_sds_port_default_destruct_handler(struct sci_base_port *base_port) +static enum sci_status +scic_sds_port_default_destruct_handler(struct scic_sds_port *sci_port) { - return default_port_handler(base_port, __func__); + return default_port_handler(sci_port, __func__); } -static enum sci_status scic_sds_port_default_reset_handler(struct sci_base_port *base_port, - u32 timeout) +static enum sci_status +scic_sds_port_default_reset_handler(struct scic_sds_port *sci_port, + u32 timeout) { - return default_port_handler(base_port, __func__); + return default_port_handler(sci_port, __func__); } -static enum sci_status scic_sds_port_default_add_phy_handler(struct sci_base_port *base_port, - struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_port_default_add_phy_handler(struct scic_sds_port *sci_port, + struct sci_base_phy *base_phy) { - return default_port_handler(base_port, __func__); + return default_port_handler(sci_port, __func__); } -static enum sci_status scic_sds_port_default_remove_phy_handler(struct sci_base_port *base_port, - struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_port_default_remove_phy_handler(struct scic_sds_port *sci_port, + struct sci_base_phy *base_phy) { - return default_port_handler(base_port, __func__); + return default_port_handler(sci_port, __func__); } -/** - * scic_sds_port_default_frame_handler - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * +/* * This is the default method for a port unsolicited frame request. It will * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even * possible to receive an unsolicited frame directed to a port object? It * seems possible if we implementing virtual functions but until then? */ -static enum sci_status scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port, - u32 frame_index) +static enum sci_status +scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port, + u32 frame_index) { struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - default_port_handler(&sci_port->parent, __func__); + default_port_handler(sci_port, __func__); scic_sds_controller_release_frame(scic, frame_index); return SCI_FAILURE_INVALID_STATE; @@ -1482,50 +1439,47 @@ static enum sci_status scic_sds_port_default_frame_handler(struct scic_sds_port static enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port, u32 event_code) { - return default_port_handler(&sci_port->parent, __func__); + return default_port_handler(sci_port, __func__); } static void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy) { - default_port_handler(&sci_port->parent, __func__); + default_port_handler(sci_port, __func__); } static void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy) { - default_port_handler(&sci_port->parent, __func__); + default_port_handler(sci_port, __func__); } static enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) { - return default_port_handler(&sci_port->parent, __func__); + return default_port_handler(sci_port, __func__); } static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) { - return default_port_handler(&sci_port->parent, __func__); + return default_port_handler(sci_port, __func__); } static struct scic_sds_port_state_handler -scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = -{ - /* SCIC_SDS_PORT_READY_SUBSTATE_WAITING */ +scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = { { - { - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_ready_substate_add_phy_handler, - scic_sds_port_default_remove_phy_handler - }, + /* SCIC_SDS_PORT_READY_SUBSTATE_WAITING */ + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_ready_substate_add_phy_handler, + scic_sds_port_default_remove_phy_handler, scic_sds_port_default_frame_handler, scic_sds_port_default_event_handler, scic_sds_port_ready_waiting_substate_link_up_handler, @@ -1533,33 +1487,31 @@ scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = scic_sds_port_ready_waiting_substate_start_io_handler, scic_sds_port_ready_substate_complete_io_handler, }, - /* SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL */ + { - { - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_ready_operational_substate_reset_handler, - scic_sds_port_ready_substate_add_phy_handler, - scic_sds_port_ready_substate_remove_phy_handler - }, + /* SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL */ + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_ready_operational_substate_reset_handler, + scic_sds_port_ready_substate_add_phy_handler, + scic_sds_port_ready_substate_remove_phy_handler, scic_sds_port_default_frame_handler, scic_sds_port_default_event_handler, scic_sds_port_ready_operational_substate_link_up_handler, scic_sds_port_ready_operational_substate_link_down_handler, scic_sds_port_ready_operational_substate_start_io_handler, - scic_sds_port_ready_substate_complete_io_handler + scic_sds_port_ready_substate_complete_io_handler, }, - /* SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING */ + { - { - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_ready_configuring_substate_add_phy_handler, - scic_sds_port_ready_configuring_substate_remove_phy_handler - }, + /* SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING */ + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_ready_configuring_substate_add_phy_handler, + scic_sds_port_ready_configuring_substate_remove_phy_handler, scic_sds_port_default_frame_handler, scic_sds_port_default_event_handler, scic_sds_port_default_link_up_handler, @@ -1857,9 +1809,7 @@ static enum sci_status scic_sds_port_general_complete_io_handler( struct scic_sds_remote_device *device, struct scic_sds_request *io_request) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; - - scic_sds_port_decrement_request_count(this_port); + scic_sds_port_decrement_request_count(port); return SCI_SUCCESS; } @@ -1867,7 +1817,7 @@ static enum sci_status scic_sds_port_general_complete_io_handler( /** * scic_sds_port_stopped_state_start_handler() - stop a port from "started" * - * @port: This is the struct sci_base_port object which is cast into a + * @port: This is the struct scic_sds_port object which is cast into a * struct scic_sds_port object. * * This function takes the struct scic_sds_port from a stopped state and @@ -1883,10 +1833,8 @@ static enum sci_status scic_sds_port_general_complete_io_handler( * has transitioned to the SCI_BASE_PORT_STATE_READY. */ static enum sci_status -scic_sds_port_stopped_state_start_handler(struct sci_base_port *base_port) +scic_sds_port_stopped_state_start_handler(struct scic_sds_port *sci_port) { - struct scic_sds_port *sci_port = - container_of(base_port, typeof(*sci_port), parent); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = sci_object_get_association(scic); enum sci_status status = SCI_SUCCESS; @@ -1941,8 +1889,9 @@ scic_sds_port_stopped_state_start_handler(struct sci_base_port *base_port) * silicon. */ if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { - sci_base_state_machine_change_state(&base_port->state_machine, - SCI_BASE_PORT_STATE_READY); + sci_base_state_machine_change_state( + &sci_port->state_machine, + SCI_BASE_PORT_STATE_READY); return SCI_SUCCESS; } else @@ -1955,49 +1904,33 @@ scic_sds_port_stopped_state_start_handler(struct sci_base_port *base_port) return status; } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * +/* * This method takes the struct scic_sds_port that is in a stopped state and handles a * stop request. This function takes no action. enum sci_status SCI_SUCCESS the * stop request is successful as the struct scic_sds_port object is already stopped. */ static enum sci_status scic_sds_port_stopped_state_stop_handler( - struct sci_base_port *port) + struct scic_sds_port *port) { /* We are already stopped so there is nothing to do here */ return SCI_SUCCESS; } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * +/* * This method takes the struct scic_sds_port that is in a stopped state and handles * the destruct request. The stopped state is the only state in which the * struct scic_sds_port can be destroyed. This function causes the port object to * transition to the SCI_BASE_PORT_STATE_FINAL. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_port_stopped_state_destruct_handler( - struct sci_base_port *port) + struct scic_sds_port *port) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; - - sci_base_state_machine_stop(&this_port->parent.state_machine); + sci_base_state_machine_stop(&port->state_machine); return SCI_SUCCESS; } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * +/* * This method takes the struct scic_sds_port that is in a stopped state and handles * the add phy request. In MPC mode the only time a phy can be added to a port * is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status @@ -2005,15 +1938,14 @@ static enum sci_status scic_sds_port_stopped_state_destruct_handler( * be added to the port. SCI_SUCCESS if the phy is added to the port. */ static enum sci_status scic_sds_port_stopped_state_add_phy_handler( - struct sci_base_port *port, + struct scic_sds_port *port, struct sci_base_phy *phy) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; struct sci_sas_address port_sas_address; /* Read the port assigned SAS Address if there is one */ - scic_sds_port_get_sas_address(this_port, &port_sas_address); + scic_sds_port_get_sas_address(port, &port_sas_address); if (port_sas_address.high != 0 && port_sas_address.low != 0) { struct sci_sas_address phy_sas_address; @@ -2031,17 +1963,11 @@ static enum sci_status scic_sds_port_stopped_state_add_phy_handler( } } - return scic_sds_port_set_phy(this_port, this_phy); + return scic_sds_port_set_phy(port, this_phy); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * +/* * This method takes the struct scic_sds_port that is in a stopped state and handles * the remove phy request. In MPC mode the only time a phy can be removed from * a port is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status @@ -2049,13 +1975,12 @@ static enum sci_status scic_sds_port_stopped_state_add_phy_handler( * be added to the port. SCI_SUCCESS if the phy is added to the port. */ static enum sci_status scic_sds_port_stopped_state_remove_phy_handler( - struct sci_base_port *port, + struct scic_sds_port *port, struct sci_base_phy *phy) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; - return scic_sds_port_clear_phy(this_port, this_phy); + return scic_sds_port_clear_phy(port, this_phy); } /* @@ -2073,16 +1998,7 @@ static enum sci_status scic_sds_port_stopped_state_remove_phy_handler( * * STOPPING STATE HANDLERS * **************************************************************************** */ -/** - * - * @port: This is the struct scic_sds_port object on which the io request count will - * be decremented. - * @device: This is the struct scic_sds_remote_device object to which the io request - * is being directed. This parameter is not required to complete this - * operation. - * @io_request: This is the request that is being completed on this port - * object. This parameter is not required to complete this operation. - * +/* * This method takes the struct scic_sds_port that is in a stopping state and handles * the complete io request. Should the request count reach 0 then the port * object will transition to the stopped state. enum sci_status SCI_SUCCESS @@ -2095,7 +2011,7 @@ static enum sci_status scic_sds_port_stopping_state_complete_io_handler( scic_sds_port_decrement_request_count(sci_port); if (sci_port->started_request_count == 0) { - sci_base_state_machine_change_state(&sci_port->parent.state_machine, + sci_base_state_machine_change_state(&sci_port->state_machine, SCI_BASE_PORT_STATE_STOPPED); } @@ -2115,29 +2031,23 @@ static enum sci_status scic_sds_port_stopping_state_complete_io_handler( * stopping state. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_port_reset_state_stop_handler( - struct sci_base_port *port) + struct scic_sds_port *port) { - struct scic_sds_port *this_port = (struct scic_sds_port *)port; - sci_base_state_machine_change_state( - &this_port->parent.state_machine, + &port->state_machine, SCI_BASE_PORT_STATE_STOPPING ); return SCI_SUCCESS; } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * +/* * This method will transition a failed port to its ready state. The port * failed because a hard reset request timed out but at some time later one or * more phys in the port became ready. enum sci_status SCI_SUCCESS */ static void scic_sds_port_reset_state_link_up_handler( - struct scic_sds_port *this_port, + struct scic_sds_port *port, struct scic_sds_phy *phy) { /* @@ -2153,26 +2063,22 @@ static void scic_sds_port_reset_state_link_up_handler( /* * In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_general_link_up_handler(this_port, phy, false); + scic_sds_port_general_link_up_handler(port, phy, false); } -/** - * - * @port: This is the struct sci_base_port object which is cast into a struct scic_sds_port - * object. - * +/* * This method process link down notifications that occur during a port reset * operation. Link downs can occur during the reset operation. enum sci_status * SCI_SUCCESS */ static void scic_sds_port_reset_state_link_down_handler( - struct scic_sds_port *this_port, + struct scic_sds_port *port, struct scic_sds_phy *phy) { /* * In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_deactivate_phy(this_port, phy, false); + scic_sds_port_deactivate_phy(port, phy, false); } static struct scic_sds_port_state_handler @@ -2180,14 +2086,12 @@ scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = { /* SCI_BASE_PORT_STATE_STOPPED */ { - { - scic_sds_port_stopped_state_start_handler, - scic_sds_port_stopped_state_stop_handler, - scic_sds_port_stopped_state_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_stopped_state_add_phy_handler, - scic_sds_port_stopped_state_remove_phy_handler - }, + scic_sds_port_stopped_state_start_handler, + scic_sds_port_stopped_state_stop_handler, + scic_sds_port_stopped_state_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_stopped_state_add_phy_handler, + scic_sds_port_stopped_state_remove_phy_handler, scic_sds_port_default_frame_handler, scic_sds_port_default_event_handler, scic_sds_port_default_link_up_handler, @@ -2197,14 +2101,12 @@ scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = }, /* SCI_BASE_PORT_STATE_STOPPING */ { - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler - }, + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler, scic_sds_port_default_frame_handler, scic_sds_port_default_event_handler, scic_sds_port_default_link_up_handler, @@ -2214,14 +2116,12 @@ scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = }, /* SCI_BASE_PORT_STATE_READY */ { - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler - }, + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler, scic_sds_port_default_frame_handler, scic_sds_port_default_event_handler, scic_sds_port_default_link_up_handler, @@ -2231,14 +2131,12 @@ scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = }, /* SCI_BASE_PORT_STATE_RESETTING */ { - { - scic_sds_port_default_start_handler, - scic_sds_port_reset_state_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler - }, + scic_sds_port_default_start_handler, + scic_sds_port_reset_state_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler, scic_sds_port_default_frame_handler, scic_sds_port_default_event_handler, scic_sds_port_reset_state_link_up_handler, @@ -2248,14 +2146,12 @@ scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = }, /* SCI_BASE_PORT_STATE_FAILED */ { - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler - }, + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler, scic_sds_port_default_frame_handler, scic_sds_port_default_event_handler, scic_sds_port_default_link_up_handler, @@ -2385,7 +2281,7 @@ static void scic_sds_port_stopped_state_enter( if ( SCI_BASE_PORT_STATE_STOPPING - == this_port->parent.state_machine.previous_state_id + == this_port->state_machine.previous_state_id ) { /* * If we enter this state becasuse of a request to stop @@ -2431,7 +2327,7 @@ static void scic_sds_port_ready_state_enter(struct sci_base_object *object) struct isci_host *ihost; u32 prev_state; - sci_port = container_of(object, typeof(*sci_port), parent.parent); + sci_port = container_of(object, typeof(*sci_port), parent); scic = scic_sds_port_get_controller(sci_port); ihost = sci_object_get_association(scic); iport = sci_object_get_association(sci_port); @@ -2439,7 +2335,7 @@ static void scic_sds_port_ready_state_enter(struct sci_base_object *object) /* Put the ready state handlers in place though they will not be there long */ scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY); - prev_state = sci_port->parent.state_machine.previous_state_id; + prev_state = sci_port->state_machine.previous_state_id; if (prev_state == SCI_BASE_PORT_STATE_RESETTING) isci_port_hard_reset_complete(iport, SCI_SUCCESS); else @@ -2456,7 +2352,7 @@ static void scic_sds_port_ready_state_exit(struct sci_base_object *object) { struct scic_sds_port *sci_port; - sci_port = container_of(object, typeof(*sci_port), parent.parent); + sci_port = container_of(object, typeof(*sci_port), parent); sci_base_state_machine_stop(&sci_port->ready_substate_machine); scic_sds_port_invalidate_dummy_remote_node(sci_port); } @@ -2587,10 +2483,16 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, { u32 index; - sci_base_port_construct(&sci_port->parent, scic_sds_port_state_table); + sci_port->parent.private = NULL; + sci_base_state_machine_construct(&sci_port->state_machine, + &sci_port->parent, + scic_sds_port_state_table, + SCI_BASE_PORT_STATE_STOPPED); + + sci_base_state_machine_start(&sci_port->state_machine); sci_base_state_machine_construct(&sci_port->ready_substate_machine, - &sci_port->parent.parent, + &sci_port->parent, scic_sds_port_ready_substate_table, SCIC_SDS_PORT_READY_SUBSTATE_WAITING); diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 4cd6bbb..528c84d 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -56,22 +56,19 @@ #ifndef _SCIC_SDS_PORT_H_ #define _SCIC_SDS_PORT_H_ -/** - * This file contains the structures, constants and prototypes for the - * struct scic_sds_port object. - * - * - */ - #include #include "sci_controller_constants.h" #include "intel_sas.h" -#include "sci_base_port.h" #include "sci_base_phy.h" #include "scu_registers.h" #define SCIC_SDS_DUMMY_PORT 0xFF +struct scic_sds_controller; +struct scic_sds_phy; +struct scic_sds_remote_device; +struct scic_sds_request; + /** * This constant defines the value utilized by SCI Components to indicate * an invalid handle. @@ -107,10 +104,53 @@ enum scic_sds_port_ready_substates { SCIC_SDS_PORT_READY_MAX_SUBSTATES }; -struct scic_sds_controller; -struct scic_sds_phy; -struct scic_sds_remote_device; -struct scic_sds_request; +/** + * enum scic_sds_port_states - This enumeration depicts all the states for the + * common port state machine. + * + * + */ +enum scic_sds_port_states { + /** + * This state indicates that the port has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_BASE_PORT_STATE_STOPPED, + + /** + * This state indicates that the port is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_BASE_PORT_STATE_STOPPING, + + /** + * This state indicates the port is now ready. Thus, the user is + * able to perform IO operations on this port. + * This state is entered from the STARTING state. + */ + SCI_BASE_PORT_STATE_READY, + + /** + * This state indicates the port is in the process of performing a hard + * reset. Thus, the user is unable to perform IO operations on this + * port. + * This state is entered from the READY state. + */ + SCI_BASE_PORT_STATE_RESETTING, + + /** + * This state indicates the port has failed a reset request. This state + * is entered when a port reset request times out. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PORT_STATE_FAILED, + + SCI_BASE_PORT_MAX_STATES + +}; /** * struct scic_sds_port - @@ -119,9 +159,15 @@ struct scic_sds_request; */ struct scic_sds_port { /** - * This field is the oommon base port object. + * The field specifies that the parent object for the base controller + * is the base object itself. */ - struct sci_base_port parent; + struct sci_base_object parent; + + /** + * This field contains the information for the base port state machine. + */ + struct sci_base_state_machine state_machine; /** * This field is the port index that is reported to the SCI USER. @@ -214,6 +260,15 @@ struct scic_sds_port { }; +struct sci_base_phy; + +typedef enum sci_status (*scic_sds_port_handler_t)(struct scic_sds_port *); + +typedef enum sci_status (*scic_sds_port_phy_handler_t)(struct scic_sds_port *, + struct sci_base_phy *); + +typedef enum sci_status (*scic_sds_port_reset_handler_t)(struct scic_sds_port *, + u32 timeout); typedef enum sci_status (*scic_sds_port_event_handler_t)(struct scic_sds_port *, u32); @@ -221,13 +276,46 @@ typedef enum sci_status (*scic_sds_port_frame_handler_t)(struct scic_sds_port *, typedef void (*scic_sds_port_link_handler_t)(struct scic_sds_port *, struct scic_sds_phy *); -typedef enum sci_status (*scic_sds_port_io_request_handler_t)( - struct scic_sds_port *, - struct scic_sds_remote_device *, - struct scic_sds_request *); +typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_port *, + struct scic_sds_remote_device *, + struct scic_sds_request *); struct scic_sds_port_state_handler { - struct sci_base_port_state_handler parent; + /** + * The start_handler specifies the method invoked when a user + * attempts to start a port. + */ + scic_sds_port_handler_t start_handler; + + /** + * The stop_handler specifies the method invoked when a user + * attempts to stop a port. + */ + scic_sds_port_handler_t stop_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a port. + */ + scic_sds_port_handler_t destruct_handler; + + /** + * The reset_handler specifies the method invoked when a user + * attempts to hard reset a port. + */ + scic_sds_port_reset_handler_t reset_handler; + + /** + * The add_phy_handler specifies the method invoked when a user + * attempts to add another phy into the port. + */ + scic_sds_port_phy_handler_t add_phy_handler; + + /** + * The remove_phy_handler specifies the method invoked when a user + * attempts to remove a phy from the port. + */ + scic_sds_port_phy_handler_t remove_phy_handler; scic_sds_port_frame_handler_t frame_handler; scic_sds_port_event_handler_t event_handler; @@ -292,15 +380,6 @@ static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *s #define scic_sds_port_active_phy(port, phy) \ (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) -/* --------------------------------------------------------------------------- */ - - - - -/* --------------------------------------------------------------------------- */ - -/* --------------------------------------------------------------------------- */ - void scic_sds_port_construct( struct scic_sds_port *this_port, u8 port_index, @@ -312,8 +391,6 @@ enum sci_status scic_sds_port_initialize( void __iomem *port_configuration_regsiter, void __iomem *viit_registers); -/* --------------------------------------------------------------------------- */ - enum sci_status scic_sds_port_add_phy( struct scic_sds_port *this_port, struct scic_sds_phy *the_phy); @@ -332,9 +409,6 @@ void scic_sds_port_deactivate_phy( struct scic_sds_phy *phy, bool do_notify_user); - - - bool scic_sds_port_link_detected( struct scic_sds_port *this_port, struct scic_sds_phy *phy); @@ -347,11 +421,6 @@ void scic_sds_port_link_down( struct scic_sds_port *this_port, struct scic_sds_phy *phy); -/* --------------------------------------------------------------------------- */ - - -/* --------------------------------------------------------------------------- */ - enum sci_status scic_sds_port_start_io( struct scic_sds_port *this_port, struct scic_sds_remote_device *the_device, @@ -362,23 +431,6 @@ enum sci_status scic_sds_port_complete_io( struct scic_sds_remote_device *the_device, struct scic_sds_request *the_io_request); -/* --------------------------------------------------------------------------- */ - - -/* --------------------------------------------------------------------------- */ - - - - - - - - - - - - - enum sci_sas_link_rate scic_sds_port_get_max_allowed_speed( struct scic_sds_port *this_port); @@ -390,8 +442,6 @@ bool scic_sds_port_is_valid_phy_assignment( struct scic_sds_port *this_port, u32 phy_index); - - void scic_sds_port_get_sas_address( struct scic_sds_port *this_port, struct sci_sas_address *sas_address); @@ -404,8 +454,4 @@ void scic_sds_port_get_attached_protocols( struct scic_sds_port *this_port, struct sci_sas_identify_address_frame_protocols *protocols); - - - - #endif /* _SCIC_SDS_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 22703b3..a7e3833 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -700,7 +700,7 @@ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, scic_sds_apc_agent_configure_ports(scic, port_agent, sci_phy, true); } else { /* the phy is already the part of the port */ - u32 port_state = sci_port->parent.state_machine.current_state_id; + u32 port_state = sci_port->state_machine.current_state_id; /* if the PORT'S state is resetting then the link up is from * port hard reset in this case, we need to tell the port -- cgit v0.10.2 From d857d9a0adf49e332413d918322405192aafc766 Mon Sep 17 00:00:00 2001 From: Maciej Trela Date: Tue, 12 Apr 2011 17:28:39 -0700 Subject: isci: remove base_phy abstraction Merge struct sci_base_phy into scic_sds_phy. Until now sci_base_phy was referenced using scic_sds_phy->parent field. 'sci_base_phy' state machine handlers were also merged into scic_sds_phy state handlers. Reported-by: Christoph Hellwig Signed-off-by: Maciej Trela Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_phy.h b/drivers/scsi/isci/core/sci_base_phy.h deleted file mode 100644 index 7e2c7e3..0000000 --- a/drivers/scsi/isci/core/sci_base_phy.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_PHY_H_ -#define _SCI_BASE_PHY_H_ - -/** - * This file contains all of the structures, constants, and methods common to - * all phy object definitions. - * - * - */ - -#include "sci_base_state_machine.h" - -/** - * enum sci_base_phy_states - This enumeration depicts the standard states - * common to all phy state machine implementations. - * - * - */ -enum sci_base_phy_states { - /** - * Simply the initial state for the base domain state machine. - */ - SCI_BASE_PHY_STATE_INITIAL, - - /** - * This state indicates that the phy has successfully been stopped. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the INITIAL state. - * This state is entered from the STARTING state. - * This state is entered from the READY state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_PHY_STATE_STOPPED, - - /** - * This state indicates that the phy is in the process of becomming - * ready. In this state no new IO operations are permitted on this phy. - * This state is entered from the STOPPED state. - * This state is entered from the READY state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_PHY_STATE_STARTING, - - /** - * This state indicates the the phy is now ready. Thus, the user - * is able to perform IO operations utilizing this phy as long as it - * is currently part of a valid port. - * This state is entered from the STARTING state. - */ - SCI_BASE_PHY_STATE_READY, - - /** - * This state indicates that the phy is in the process of being reset. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the READY state. - */ - SCI_BASE_PHY_STATE_RESETTING, - - /** - * Simply the final state for the base phy state machine. - */ - SCI_BASE_PHY_STATE_FINAL, -}; - -/** - * struct sci_base_phy - This structure defines all of the fields common to PHY - * objects. - * - * - */ -struct sci_base_phy { - /** - * This field depicts the parent object (struct sci_base_object) for the phy. - */ - struct sci_base_object parent; - - /** - * This field contains the information for the base phy state machine. - */ - struct sci_base_state_machine state_machine; -}; - -typedef enum sci_status (*sci_base_phy_handler_t)(struct sci_base_phy *); - -/** - * struct sci_base_phy_state_handler - This structure contains all of the state - * handler methods common to base phy state machines. Handler methods - * provide the ability to change the behavior for user requests or - * transitions depending on the state the machine is in. - * - * - */ -struct sci_base_phy_state_handler { - /** - * The start_handler specifies the method invoked when there is an - * attempt to start a phy. - */ - sci_base_phy_handler_t start_handler; - - /** - * The stop_handler specifies the method invoked when there is an - * attempt to stop a phy. - */ - sci_base_phy_handler_t stop_handler; - - /** - * The reset_handler specifies the method invoked when there is an - * attempt to reset a phy. - */ - sci_base_phy_handler_t reset_handler; - - /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a phy. - */ - sci_base_phy_handler_t destruct_handler; - -}; - -/** - * sci_base_phy_construct() - Construct the base phy - * @this_phy: This parameter specifies the base phy to be constructed. - * @state_table: This parameter specifies the table of state definitions to be - * utilized for the phy state machine. - * - */ -static inline void sci_base_phy_construct( - struct sci_base_phy *base_phy, - const struct sci_base_state *state_table) -{ - base_phy->parent.private = NULL; - sci_base_state_machine_construct( - &base_phy->state_machine, - &base_phy->parent, - state_table, - SCI_BASE_PHY_STATE_INITIAL - ); - - sci_base_state_machine_start( - &base_phy->state_machine - ); -} - - -#endif /* _SCI_BASE_PHY_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 577d1df..78b2e6f 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -679,7 +679,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro for (index = 0; index < SCI_MAX_PHYS; index++) { sci_phy = &scic->phy_table[index]; - state = sci_phy->parent.state_machine.current_state_id; + state = sci_phy->state_machine.current_state_id; if (!scic_sds_phy_get_port(sci_phy)) continue; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index c26e5df..d5bbc22 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -253,7 +253,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ - sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; @@ -276,7 +276,7 @@ static void scic_sds_phy_sata_timeout(void *phy) sci_base_state_machine_stop(&sci_phy->starting_substate_machine); - sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); } @@ -353,7 +353,7 @@ enum sci_status scic_sds_phy_initialize( /* * There is nothing that needs to be done in this state just * transition to the stopped state. */ - sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; @@ -515,7 +515,7 @@ void scic_sds_phy_get_attached_phy_protocols( */ enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) { - return sci_phy->state_handlers->parent.start_handler(&sci_phy->parent); + return sci_phy->state_handlers->start_handler(sci_phy); } /** @@ -527,7 +527,7 @@ enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) */ enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) { - return sci_phy->state_handlers->parent.stop_handler(&sci_phy->parent); + return sci_phy->state_handlers->stop_handler(sci_phy); } /** @@ -540,9 +540,7 @@ enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) enum sci_status scic_sds_phy_reset( struct scic_sds_phy *this_phy) { - return this_phy->state_handlers->parent.reset_handler( - &this_phy->parent - ); + return this_phy->state_handlers->reset_handler(this_phy); } /** @@ -714,7 +712,7 @@ static void scic_sds_phy_restart_starting_state( sci_base_state_machine_stop(&sci_phy->starting_substate_machine); /* Re-enter the base state machine starting state */ - sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); } @@ -722,12 +720,9 @@ static void scic_sds_phy_restart_starting_state( * SCIC SDS PHY general handlers ************************************************************************** */ static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( - struct sci_base_phy *phy) + struct scic_sds_phy *phy) { - struct scic_sds_phy *this_phy; - this_phy = (struct scic_sds_phy *)phy; - - sci_base_state_machine_stop(&this_phy->starting_substate_machine); + sci_base_state_machine_stop(&phy->starting_substate_machine); sci_base_state_machine_change_state(&phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); @@ -1331,11 +1326,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle * * SCIC SDS PHY POWER_HANDLERS * ***************************************************************************** */ -/** - * scic_sds_phy_starting_substate_await_sas_power_consume_power_handler - - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * +/* * This method is called by the struct scic_sds_controller when the phy object is * granted power. - The notify enable spinups are turned on for this phy object * - The phy state machine is transitioned to the @@ -1357,11 +1348,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_po return SCI_SUCCESS; } -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a struct scic_sds_phy - * object. - * +/* * This method is called by the struct scic_sds_controller when the phy object is * granted power. - The phy state machine is transitioned to the * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS @@ -1393,148 +1380,153 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_p return SCI_SUCCESS; } -static enum sci_status default_phy_handler(struct sci_base_phy *base_phy, const char *func) +static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, + const char *func) { - struct scic_sds_phy *sci_phy; - - sci_phy = container_of(base_phy, typeof(*sci_phy), parent); dev_dbg(sciphy_to_dev(sci_phy), "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&base_phy->state_machine)); + sci_base_state_machine_get_state(&sci_phy->state_machine)); return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_phy_default_start_handler(struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy) { - return default_phy_handler(base_phy, __func__); + return default_phy_handler(sci_phy, __func__); } -static enum sci_status scic_sds_phy_default_stop_handler(struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy) { - return default_phy_handler(base_phy, __func__); + return default_phy_handler(sci_phy, __func__); } -static enum sci_status scic_sds_phy_default_reset_handler(struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy) { - return default_phy_handler(base_phy, __func__); + return default_phy_handler(sci_phy, __func__); } -static enum sci_status scic_sds_phy_default_destroy_handler(struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy) { - return default_phy_handler(base_phy, __func__); + return default_phy_handler(sci_phy, __func__); } -static enum sci_status scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, - u32 frame_index) +static enum sci_status +scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, + u32 frame_index) { struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - default_phy_handler(&sci_phy->parent, __func__); + default_phy_handler(sci_phy, __func__); scic_sds_controller_release_frame(scic, frame_index); return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) +static enum sci_status +scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) { - return default_phy_handler(&sci_phy->parent, __func__); + return default_phy_handler(sci_phy, __func__); } -static enum sci_status scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) +static enum sci_status +scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) { - return default_phy_handler(&sci_phy->parent, __func__); + return default_phy_handler(sci_phy, __func__); } static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, - .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, + .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, - .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, + .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler @@ -1885,7 +1877,7 @@ static void scic_sds_phy_starting_final_substate_enter(struct sci_base_object *o { struct scic_sds_phy *sci_phy; - sci_phy = container_of(object, typeof(*sci_phy), parent.parent); + sci_phy = container_of(object, typeof(*sci_phy), parent); scic_sds_phy_set_starting_substate_handlers(sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); @@ -1893,7 +1885,7 @@ static void scic_sds_phy_starting_final_substate_enter(struct sci_base_object *o /* State machine has run to completion so exit out and change * the base state machine to the ready state */ - sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_READY); } @@ -1937,22 +1929,17 @@ static const struct sci_base_state scic_sds_phy_starting_substates[] = { } }; -/** - * - * @phy: This is the struct sci_base_phy object which is cast into a - * struct scic_sds_phy object. - * +/* * This method takes the struct scic_sds_phy from a stopped state and * attempts to start it. - The phy state machine is transitioned to the * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS */ -static enum sci_status scic_sds_phy_stopped_state_start_handler(struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) { struct isci_host *ihost; - struct scic_sds_phy *sci_phy; struct scic_sds_controller *scic; - sci_phy = container_of(base_phy, typeof(*sci_phy), parent); scic = scic_sds_phy_get_controller(sci_phy), ihost = sci_object_get_association(scic); @@ -1961,28 +1948,31 @@ static enum sci_status scic_sds_phy_stopped_state_start_handler(struct sci_base_ scic_sds_phy_sata_timeout); if (sci_phy->sata_timeout_timer) - sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); return SCI_SUCCESS; } -static enum sci_status scic_sds_phy_stopped_state_destroy_handler(struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) { return SCI_SUCCESS; } -static enum sci_status scic_sds_phy_ready_state_stop_handler(struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) { - sci_base_state_machine_change_state(&base_phy->state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); return SCI_SUCCESS; } -static enum sci_status scic_sds_phy_ready_state_reset_handler(struct sci_base_phy *base_phy) +static enum sci_status +scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) { - sci_base_state_machine_change_state(&base_phy->state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_RESETTING); return SCI_SUCCESS; @@ -2007,7 +1997,7 @@ static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_ph switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); result = SCI_SUCCESS; break; @@ -2041,7 +2031,7 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sd switch (scu_get_event_code(event_code)) { case SCU_EVENT_HARD_RESET_TRANSMITTED: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->parent.state_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); result = SCI_SUCCESS; break; @@ -2063,55 +2053,55 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sd static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STOPPED] = { - .parent.start_handler = scic_sds_phy_stopped_state_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_stopped_state_destroy_handler, + .start_handler = scic_sds_phy_stopped_state_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STARTING] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_READY] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_ready_state_stop_handler, - .parent.reset_handler = scic_sds_phy_ready_state_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_ready_state_stop_handler, + .reset_handler = scic_sds_phy_ready_state_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_ready_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_RESETTING] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_resetting_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_FINAL] = { - .parent.start_handler = scic_sds_phy_default_start_handler, - .parent.stop_handler = scic_sds_phy_default_stop_handler, - .parent.reset_handler = scic_sds_phy_default_reset_handler, - .parent.destruct_handler = scic_sds_phy_default_destroy_handler, + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler @@ -2260,7 +2250,7 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) scu_link_layer_stop_protocol_engine(sci_phy); - if (sci_phy->parent.state_machine.previous_state_id != + if (sci_phy->state_machine.previous_state_id != SCI_BASE_PHY_STATE_INITIAL) scic_sds_controller_link_down( scic_sds_phy_get_controller(sci_phy), @@ -2299,7 +2289,7 @@ static void scic_sds_phy_starting_state_enter( /* Change over to the starting substate machine to continue */ sci_base_state_machine_start(&this_phy->starting_substate_machine); - if (this_phy->parent.state_machine.previous_state_id + if (this_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY) { scic_sds_controller_link_down( scic_sds_phy_get_controller(this_phy), @@ -2380,12 +2370,10 @@ static void scic_sds_phy_resetting_state_enter( scu_link_layer_tx_hard_reset(this_phy); } else { /* - * The SCU does not need to have a descrete reset state so just go back to + * The SCU does not need to have a discrete reset state so just go back to * the starting state. */ - sci_base_state_machine_change_state( - &this_phy->parent.state_machine, - SCI_BASE_PHY_STATE_STARTING - ); + sci_base_state_machine_change_state(&this_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); } } @@ -2436,10 +2424,14 @@ static const struct sci_base_state scic_sds_phy_state_table[] = { void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, struct scic_sds_port *owning_port, u8 phy_index) { - /* - * Call the base constructor first - */ - sci_base_phy_construct(&sci_phy->parent, scic_sds_phy_state_table); + + sci_phy->parent.private = NULL; + sci_base_state_machine_construct(&sci_phy->state_machine, + &sci_phy->parent, + scic_sds_phy_state_table, + SCI_BASE_PHY_STATE_INITIAL); + + sci_base_state_machine_start(&sci_phy->state_machine); /* Copy the rest of the input data to our locals */ sci_phy->owning_port = owning_port; @@ -2455,7 +2447,7 @@ void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, /* Initialize the the substate machines */ sci_base_state_machine_construct(&sci_phy->starting_substate_machine, - &sci_phy->parent.parent, + &sci_phy->parent, scic_sds_phy_starting_substates, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); } diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 7f7a045..97c0476 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -56,17 +56,10 @@ #ifndef _SCIC_SDS_PHY_H_ #define _SCIC_SDS_PHY_H_ -/** - * This file contains the structures, constants and prototypes for the - * struct scic_sds_phy object. - * - * - */ - #include "intel_sata.h" #include "intel_sas.h" -#include "sci_base_phy.h" #include "scu_registers.h" +#include "sci_base_state_machine.h" struct scic_sds_port; /** @@ -91,6 +84,53 @@ struct scic_sds_port; */ #define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 +enum scic_sds_phy_states { + /** + * Simply the initial state for the base domain state machine. + */ + SCI_BASE_PHY_STATE_INITIAL, + + /** + * This state indicates that the phy has successfully been stopped. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the INITIAL state. + * This state is entered from the STARTING state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PHY_STATE_STOPPED, + + /** + * This state indicates that the phy is in the process of becomming + * ready. In this state no new IO operations are permitted on this phy. + * This state is entered from the STOPPED state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PHY_STATE_STARTING, + + /** + * This state indicates the the phy is now ready. Thus, the user + * is able to perform IO operations utilizing this phy as long as it + * is currently part of a valid port. + * This state is entered from the STARTING state. + */ + SCI_BASE_PHY_STATE_READY, + + /** + * This state indicates that the phy is in the process of being reset. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the READY state. + */ + SCI_BASE_PHY_STATE_RESETTING, + + /** + * Simply the final state for the base phy state machine. + */ + SCI_BASE_PHY_STATE_FINAL, +}; + + /** * enum scic_sds_phy_starting_substates - * @@ -184,7 +224,15 @@ enum scic_sds_phy_protocol { * */ struct scic_sds_phy { - struct sci_base_phy parent; + /** + * This field depicts the parent object (struct sci_base_object) for the phy. + */ + struct sci_base_object parent; + + /** + * This field contains the information for the base phy state machine. + */ + struct sci_base_state_machine state_machine; /** * This field specifies the port object that owns/contains this phy. @@ -260,7 +308,7 @@ struct scic_sds_phy { }; - +typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *); typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32); typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32); typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); @@ -272,9 +320,28 @@ typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); */ struct scic_sds_phy_state_handler { /** - * This is the struct sci_base_phy object state handlers. + * The start_handler specifies the method invoked when there is an + * attempt to start a phy. + */ + scic_sds_phy_handler_t start_handler; + + /** + * The stop_handler specifies the method invoked when there is an + * attempt to stop a phy. + */ + scic_sds_phy_handler_t stop_handler; + + /** + * The reset_handler specifies the method invoked when there is an + * attempt to reset a phy. + */ + scic_sds_phy_handler_t reset_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a phy. */ - struct sci_base_phy_state_handler parent; + scic_sds_phy_handler_t destruct_handler; /** * The state handler for unsolicited frames received from the SCU hardware. diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index ff9ac73..ebbde7b 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -316,7 +316,7 @@ enum sci_status scic_sds_port_add_phy( struct scic_sds_phy *the_phy) { return this_port->state_handlers->add_phy_handler( - this_port, &the_phy->parent); + this_port, the_phy); } @@ -334,7 +334,7 @@ enum sci_status scic_sds_port_remove_phy( struct scic_sds_phy *the_phy) { return this_port->state_handlers->remove_phy_handler( - this_port, &the_phy->parent); + this_port, the_phy); } /** @@ -1084,15 +1084,14 @@ static enum sci_status scic_sds_port_ready_substate_complete_io_handler( static enum sci_status scic_sds_port_ready_substate_add_phy_handler( struct scic_sds_port *port, - struct sci_base_phy *phy) + struct scic_sds_phy *phy) { - struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; enum sci_status status; - status = scic_sds_port_set_phy(port, this_phy); + status = scic_sds_port_set_phy(port, phy); if (status == SCI_SUCCESS) { - scic_sds_port_general_link_up_handler(port, this_phy, true); + scic_sds_port_general_link_up_handler(port, phy, true); port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; @@ -1108,15 +1107,14 @@ static enum sci_status scic_sds_port_ready_substate_add_phy_handler( static enum sci_status scic_sds_port_ready_substate_remove_phy_handler( struct scic_sds_port *port, - struct sci_base_phy *phy) + struct scic_sds_phy *phy) { - struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; enum sci_status status; - status = scic_sds_port_clear_phy(port, this_phy); + status = scic_sds_port_clear_phy(port, phy); if (status == SCI_SUCCESS) { - scic_sds_port_deactivate_phy(port, this_phy, true); + scic_sds_port_deactivate_phy(port, phy, true); port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; @@ -1293,15 +1291,14 @@ static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler */ static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( struct scic_sds_port *port, - struct sci_base_phy *phy) + struct scic_sds_phy *phy) { - struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; enum sci_status status; - status = scic_sds_port_set_phy(port, this_phy); + status = scic_sds_port_set_phy(port, phy); if (status == SCI_SUCCESS) { - scic_sds_port_general_link_up_handler(port, this_phy, true); + scic_sds_port_general_link_up_handler(port, phy, true); /* * Re-enter the configuring state since this may be the last phy in @@ -1321,15 +1318,14 @@ static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( */ static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handler( struct scic_sds_port *port, - struct sci_base_phy *phy) + struct scic_sds_phy *phy) { - struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; enum sci_status status; - status = scic_sds_port_clear_phy(port, this_phy); + status = scic_sds_port_clear_phy(port, phy); if (status == SCI_SUCCESS) { - scic_sds_port_deactivate_phy(port, this_phy, true); + scic_sds_port_deactivate_phy(port, phy, true); /* * Re-enter the configuring state since this may be the last phy in @@ -1406,14 +1402,14 @@ scic_sds_port_default_reset_handler(struct scic_sds_port *sci_port, static enum sci_status scic_sds_port_default_add_phy_handler(struct scic_sds_port *sci_port, - struct sci_base_phy *base_phy) + struct scic_sds_phy *base_phy) { return default_port_handler(sci_port, __func__); } static enum sci_status scic_sds_port_default_remove_phy_handler(struct scic_sds_port *sci_port, - struct sci_base_phy *base_phy) + struct scic_sds_phy *base_phy) { return default_port_handler(sci_port, __func__); } @@ -1939,9 +1935,8 @@ static enum sci_status scic_sds_port_stopped_state_destruct_handler( */ static enum sci_status scic_sds_port_stopped_state_add_phy_handler( struct scic_sds_port *port, - struct sci_base_phy *phy) + struct scic_sds_phy *phy) { - struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; struct sci_sas_address port_sas_address; /* Read the port assigned SAS Address if there is one */ @@ -1953,7 +1948,7 @@ static enum sci_status scic_sds_port_stopped_state_add_phy_handler( /* * Make sure that the PHY SAS Address matches the SAS Address * for this port. */ - scic_sds_phy_get_sas_address(this_phy, &phy_sas_address); + scic_sds_phy_get_sas_address(phy, &phy_sas_address); if ( (port_sas_address.high != phy_sas_address.high) @@ -1963,10 +1958,9 @@ static enum sci_status scic_sds_port_stopped_state_add_phy_handler( } } - return scic_sds_port_set_phy(port, this_phy); + return scic_sds_port_set_phy(port, phy); } - /* * This method takes the struct scic_sds_port that is in a stopped state and handles * the remove phy request. In MPC mode the only time a phy can be removed from @@ -1976,11 +1970,9 @@ static enum sci_status scic_sds_port_stopped_state_add_phy_handler( */ static enum sci_status scic_sds_port_stopped_state_remove_phy_handler( struct scic_sds_port *port, - struct sci_base_phy *phy) + struct scic_sds_phy *phy) { - struct scic_sds_phy *this_phy = (struct scic_sds_phy *)phy; - - return scic_sds_port_clear_phy(port, this_phy); + return scic_sds_port_clear_phy(port, phy); } /* diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 528c84d..d79c574 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -59,7 +59,6 @@ #include #include "sci_controller_constants.h" #include "intel_sas.h" -#include "sci_base_phy.h" #include "scu_registers.h" #define SCIC_SDS_DUMMY_PORT 0xFF @@ -260,12 +259,10 @@ struct scic_sds_port { }; -struct sci_base_phy; - typedef enum sci_status (*scic_sds_port_handler_t)(struct scic_sds_port *); typedef enum sci_status (*scic_sds_port_phy_handler_t)(struct scic_sds_port *, - struct sci_base_phy *); + struct scic_sds_phy *); typedef enum sci_status (*scic_sds_port_reset_handler_t)(struct scic_sds_port *, u32 timeout); -- cgit v0.10.2 From 26bace349ecd08b1d744f7067d24fd1bedb91020 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 14 Apr 2011 18:27:49 -0700 Subject: isci: replace sci_sas_link_rate with sas_linkrate Drop duplicated enum definition. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index eb9686e..d9c9f33 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -180,20 +180,6 @@ struct sas_capabilities { }; /** - * enum _SCI_SAS_LINK_RATE - This enumeration depicts the SAS specification - * defined link speeds. - * - * - */ -enum sci_sas_link_rate { - SCI_SAS_NO_LINK_RATE = 0, - SCI_SATA_SPINUP_HOLD = 0x3, - SCI_SAS_150_GB = 0x8, - SCI_SAS_300_GB = 0x9, - SCI_SAS_600_GB = 0xA -}; - -/** * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS * specification defined task attribute values for a command information * unit. diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index bf0d3be..784c5b5 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -68,6 +68,7 @@ #include "intel_sata.h" #include "intel_sas.h" +#include struct scic_sds_phy; struct scic_sds_port; @@ -93,7 +94,7 @@ struct scic_phy_properties { * This field specifies the link rate at which the phy is * currently operating. */ - enum sci_sas_link_rate negotiated_link_rate; + enum sas_linkrate negotiated_link_rate; /** * This field indicates the protocols supported by the phy. diff --git a/drivers/scsi/isci/core/scic_remote_device.h b/drivers/scsi/isci/core/scic_remote_device.h index 1401844..62fa7fd 100644 --- a/drivers/scsi/isci/core/scic_remote_device.h +++ b/drivers/scsi/isci/core/scic_remote_device.h @@ -254,7 +254,7 @@ enum sci_status scic_remote_device_reset_complete( * * Return the link rate at which we transfer for the supplied remote device. */ -enum sci_sas_link_rate scic_remote_device_get_connection_rate( +enum sas_linkrate scic_remote_device_get_connection_rate( struct scic_sds_remote_device *remote_device); /** diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index d5bbc22..40176f0 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -696,7 +696,7 @@ static void scic_sds_phy_start_sata_link_training( */ static void scic_sds_phy_complete_link_training( struct scic_sds_phy *sci_phy, - enum sci_sas_link_rate max_link_rate, + enum sas_linkrate max_link_rate, u32 next_state) { sci_phy->max_negotiated_speed = max_link_rate; @@ -808,21 +808,21 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_ case SCU_EVENT_SAS_15: case SCU_EVENT_SAS_15_SSC: scic_sds_phy_complete_link_training( - this_phy, SCI_SAS_150_GB, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + this_phy, SAS_LINK_RATE_1_5_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF ); break; case SCU_EVENT_SAS_30: case SCU_EVENT_SAS_30_SSC: scic_sds_phy_complete_link_training( - this_phy, SCI_SAS_300_GB, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + this_phy, SAS_LINK_RATE_3_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF ); break; case SCU_EVENT_SAS_60: case SCU_EVENT_SAS_60_SSC: scic_sds_phy_complete_link_training( - this_phy, SCI_SAS_600_GB, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + this_phy, SAS_LINK_RATE_6_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF ); break; @@ -1082,7 +1082,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_han case SCU_EVENT_SATA_15_SSC: scic_sds_phy_complete_link_training( this_phy, - SCI_SAS_150_GB, + SAS_LINK_RATE_1_5_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF ); break; @@ -1091,7 +1091,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_han case SCU_EVENT_SATA_30_SSC: scic_sds_phy_complete_link_training( this_phy, - SCI_SAS_300_GB, + SAS_LINK_RATE_3_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF ); break; @@ -1100,7 +1100,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_han case SCU_EVENT_SATA_60_SSC: scic_sds_phy_complete_link_training( this_phy, - SCI_SAS_600_GB, + SAS_LINK_RATE_6_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF ); break; @@ -2439,7 +2439,7 @@ void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, sci_phy->bcn_received_while_port_unassigned = false; sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; sci_phy->link_layer_registers = NULL; - sci_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; + sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; sci_phy->sata_timeout_timer = NULL; /* Clear out the identification buffer data */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 97c0476..fb99d47 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -60,6 +60,7 @@ #include "intel_sas.h" #include "scu_registers.h" #include "sci_base_state_machine.h" +#include struct scic_sds_port; /** @@ -243,7 +244,7 @@ struct scic_sds_phy { * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s, * or 6.0 Gb/s operation. */ - enum sci_sas_link_rate max_negotiated_speed; + enum sas_linkrate max_negotiated_speed; /** * This member specifies the protocol being utilized on this phy. This diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index ebbde7b..40c1297 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -684,7 +684,7 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); - sci_phy->max_negotiated_speed = SCI_SAS_NO_LINK_RATE; + sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; /* Re-assign the phy back to the LP as if it were a narrow port */ writel(sci_phy->phy_index, @@ -977,12 +977,12 @@ static void scic_sds_port_update_viit_entry(struct scic_sds_port *this_port) * This method returns the maximum negotiated speed of the slowest phy in the * port. */ -enum sci_sas_link_rate scic_sds_port_get_max_allowed_speed( +enum sas_linkrate scic_sds_port_get_max_allowed_speed( struct scic_sds_port *this_port) { - u16 index = 0; - enum sci_sas_link_rate max_allowed_speed = SCI_SAS_600_GB; - struct scic_sds_phy *phy = NULL; + u16 index; + enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS; + struct scic_sds_phy *phy = NULL; /* * Loop through all of the phys in this port and find the phy with the diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index d79c574..a17c64a7 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -428,7 +428,7 @@ enum sci_status scic_sds_port_complete_io( struct scic_sds_remote_device *the_device, struct scic_sds_request *the_io_request); -enum sci_sas_link_rate scic_sds_port_get_max_allowed_speed( +enum sas_linkrate scic_sds_port_get_max_allowed_speed( struct scic_sds_port *this_port); void scic_sds_port_broadcast_change_received( diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index d756216..0976fae 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -256,7 +256,7 @@ enum sci_status scic_remote_device_reset_complete( } -enum sci_sas_link_rate scic_remote_device_get_connection_rate( +enum sas_linkrate scic_remote_device_get_connection_rate( struct scic_sds_remote_device *sci_dev) { return sci_dev->connection_rate; diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index 0e8bb0f..ebb0ac8 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -59,6 +59,7 @@ #include "intel_sas.h" #include "scu_remote_node_context.h" #include "scic_sds_remote_node_context.h" +#include /** * enum scic_sds_remote_device_states - This enumeration depicts all the states @@ -260,7 +261,7 @@ struct scic_sds_remote_device { * This field is the programmed connection rate for this remote device. It is * used to program the TC with the maximum allowed connection rate. */ - enum sci_sas_link_rate connection_rate; + enum sas_linkrate connection_rate; /** * This field contains the allowed target protocols for this remote device. -- cgit v0.10.2 From 467e855a0331f619f41fbf7391bc29ec0ca923a0 Mon Sep 17 00:00:00 2001 From: Bartosz Barcinski Date: Tue, 12 Apr 2011 17:28:41 -0700 Subject: isci: sparse warnings cleanup Clean warnings and errors reported by sparse tool. request.c:430:50: warning: mixing different enum types remote_device.c:534:39: warning: symbol 'flags' shadows an earlier one task.c:495:44: warning: mixing different enum types scic_sds_controller.c:2155:24: warning: mixing different enum types scic_sds_controller.c:2272:36: warning: mixing different enum types scic_sds_controller.c:2911:38: warning: incorrect type in initializer (different address spaces) scic_sds_controller.c:2913:25: warning: incorrect type in argument 2 (different address spaces) scic_sds_request.c:875:34: warning: cast removes address space of expression scic_sds_request.c:876:123: warning: incorrect type in argument 2 (different address spaces) scic_sds_port.c:585:51: warning: incorrect type in assignment (different address spaces) scic_sds_port.c:712:9: warning: incorrect type in argument 2 (different address spaces) scic_sds_port.c:1770:25: warning: incorrect type in argument 2 (different address spaces) Signed-off-by: Bartosz Barcinski Signed-off-by: Maciej Patelczyk [fixed up some false positives and misconversions] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h index 23a2c78..23c7b5c 100644 --- a/drivers/scsi/isci/core/scic_controller.h +++ b/drivers/scsi/isci/core/scic_controller.h @@ -98,7 +98,7 @@ enum sci_status scic_controller_stop( enum sci_status scic_controller_reset( struct scic_sds_controller *controller); -enum sci_io_status scic_controller_start_io( +enum sci_status scic_controller_start_io( struct scic_sds_controller *controller, struct scic_sds_remote_device *remote_device, struct scic_sds_request *io_request, diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 78b2e6f..8194618 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1967,10 +1967,10 @@ enum sci_status scic_controller_reset( * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking * the scic_controller_start_io() method. scic_controller_allocate_tag() for * more information on allocating a tag. Indicate if the controller - * successfully started the IO request. SCI_IO_SUCCESS if the IO request was + * successfully started the IO request. SCI_SUCCESS if the IO request was * successfully started. Determine the failure situations and return values. */ -enum sci_io_status scic_controller_start_io( +enum sci_status scic_controller_start_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *rdev, struct scic_sds_request *req, @@ -2723,8 +2723,8 @@ enum sci_status scic_controller_initialize( * logical ports */ for (index = 0; index < max_supported_ports; index++) { - struct scu_port_task_scheduler_group_registers *ptsg = - &scic->scu_registers->peg0.ptsg; + struct scu_port_task_scheduler_group_registers __iomem + *ptsg = &scic->scu_registers->peg0.ptsg; writel(index, &ptsg->protocol_engine[index]); } diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index a17c64a7..c7741e8 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -250,7 +250,7 @@ struct scic_sds_port { * task scheduler group PE configuration registers. * It is used to assign PEs to a port. */ - u32 *port_pe_configuration_register; + u32 __iomem *port_pe_configuration_register; /** * This field is the VIIT register space for ths port object. diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 191b5d0..64aa9c6 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -850,19 +850,20 @@ void *scic_io_request_get_response_iu_address( u32 scic_io_request_get_number_of_bytes_transferred( struct scic_sds_request *scic_sds_request) { + struct scic_sds_controller *scic = scic_sds_request->owning_controller; u32 ret_val = 0; - if (readl(&scic_sds_request->owning_controller->smu_registers->address_modifier) == 0) { + if (readl(&scic->smu_registers->address_modifier) == 0) { + void __iomem *scu_reg_base = scic->scu_registers; /* * get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where * BAR1 is the scu_registers * 0x20002C = 0x200000 + 0x2c * = start of task context SRAM + offset of (type.ssp.data_offset) * TCi is the io_tag of struct scic_sds_request */ - ret_val = readl((u8 *)scic_sds_request->owning_controller->scu_registers + - (SCU_TASK_CONTEXT_SRAM + SCI_FIELD_OFFSET(struct scu_task_context, type.ssp.data_offset)) + - ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(scic_sds_request->io_tag)) - ); + ret_val = readl(scu_reg_base + + (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + + ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(scic_sds_request->io_tag))); } return ret_val; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index ab638ec..320850c 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -513,15 +513,13 @@ bool isci_device_is_reset_pending( __func__, isci_device, isci_request); if (isci_request->ttype == io_task) { - - unsigned long flags; struct sas_task *task = isci_request_access_task( isci_request); - spin_lock_irqsave(&task->task_state_lock, flags); + spin_lock(&task->task_state_lock); if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) reset_is_pending = true; - spin_unlock_irqrestore(&task->task_state_lock, flags); + spin_unlock(&task->task_state_lock); } } diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index aa6b430..b88101e 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -429,7 +429,7 @@ int isci_task_execute_tmf( unsigned long timeout_ms) { DECLARE_COMPLETION_ONSTACK(completion); - enum sci_status status = SCI_FAILURE; + enum sci_task_status status = SCI_TASK_FAILURE; struct scic_sds_remote_device *sci_device; struct isci_remote_device *isci_device = tmf->device; struct isci_request *request; @@ -488,7 +488,7 @@ int isci_task_execute_tmf( SCI_CONTROLLER_INVALID_IO_TAG ); - if (status != SCI_SUCCESS) { + if (status != SCI_TASK_SUCCESS) { dev_warn(&isci_host->pdev->dev, "%s: start_io failed - status = 0x%x, request = %p\n", __func__, -- cgit v0.10.2 From 6cb4d6b382be6345c2d0c4b1b90dfdf9af32da7e Mon Sep 17 00:00:00 2001 From: Bartosz Barcinski Date: Tue, 12 Apr 2011 17:28:43 -0700 Subject: isci: audit usage of BUG_ON macro in isci driver Removes unnecessary usage of BUG_ON macro, excluding core directory. In some cases macro is unnecesary, check is done in caller function. In other cases macro is replaced by if construction with appropriate warning. Signed-off-by: Maciej Patelczyk [changed some survivable bug conditions to WARN_ONCE] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 64aa9c6..a6ee155 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1635,7 +1635,6 @@ static void scic_sds_request_completed_state_enter( struct isci_host *ihost = sci_object_get_association(scic); struct isci_request *ireq = sci_object_get_association(sci_req); - SET_STATE_HANDLER(sci_req, scic_sds_request_state_handler_table, SCI_BASE_REQUEST_STATE_COMPLETED); diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 5e63ae6..5da9a69 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -362,8 +362,6 @@ static int isci_setup_interrupts(struct pci_dev *pdev) else isr = isci_msix_isr; - BUG_ON(!isci_host); - err = devm_request_irq(&pdev->dev, msix->vector, isr, 0, DRV_NAME"-msix", isci_host); if (!err) @@ -379,13 +377,11 @@ static int isci_setup_interrupts(struct pci_dev *pdev) pci_disable_msix(pdev); goto intx; } - return 0; intx: err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr, IRQF_SHARED, DRV_NAME"-intx", pdev); - return err; } diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index b675a94..cf78cf0 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -178,6 +178,7 @@ void isci_port_link_up( unsigned long success = true; BUG_ON(isci_phy->isci_port != NULL); + isci_phy->isci_port = isci_port; dev_dbg(&isci_host->pdev->dev, diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 320850c..9301e25 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -202,8 +202,6 @@ static enum sci_status isci_remote_device_construct( sci_object_set_association(to_sci_dev(isci_device), isci_device); - BUG_ON(port->isci_host == NULL); - /* start the device. */ status = scic_remote_device_start(to_sci_dev(isci_device), ISCI_REMOTE_DEVICE_START_TIMEOUT); @@ -257,8 +255,12 @@ isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) return NULL; } - BUG_ON(!list_empty(&idev->reqs_in_process)); - BUG_ON(!list_empty(&idev->node)); + if (WARN_ONCE(!list_empty(&idev->reqs_in_process), "found requests in process\n")) + return NULL; + + if (WARN_ONCE(!list_empty(&idev->node), "found non-idle remote device\n")) + return NULL; + isci_remote_device_change_state(idev, isci_freed); return idev; diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 37ffedc..a90c299 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -472,7 +472,6 @@ int isci_request_execute( out: if (status != SCI_SUCCESS) { - /* release dma memory on failure. */ isci_request_free(isci_host, request); request = NULL; diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 0c08da6..642b211 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -193,8 +193,6 @@ static inline enum isci_request_status isci_request_change_started_to_newstate( enum isci_request_status old_state; unsigned long flags; - BUG_ON(isci_request == NULL); - spin_lock_irqsave(&isci_request->state_lock, flags); old_state = isci_request->status; @@ -243,7 +241,8 @@ static inline void isci_request_free( struct isci_host *isci_host, struct isci_request *isci_request) { - BUG_ON(isci_request == NULL); + if (!isci_request) + return; /* release the dma memory if we fail. */ dma_pool_free(isci_host->dma_pool, isci_request, diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index b88101e..c79968d 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -272,7 +272,7 @@ static enum sci_status isci_task_request_build( { struct scic_sds_remote_device *sci_device; enum sci_status status = SCI_FAILURE; - struct isci_request *request; + struct isci_request *request = NULL; struct isci_remote_device *isci_device; /* struct sci_sas_identify_address_frame_protocols dev_protocols; */ struct smp_discover_response_protocols dev_protocols; @@ -372,8 +372,6 @@ static void isci_tmf_timeout_cb(void *tmf_request_arg) struct isci_tmf *tmf = isci_request_access_tmf(request); enum sci_status status; - BUG_ON(request->ttype != tmf_task); - /* This task management request has timed-out. Terminate the request * so that the request eventually completes to the requestor in the * request completion callback path. @@ -1121,8 +1119,11 @@ static void isci_abort_task_process_cb( * request state was already set to "aborted" by the abort * task function. */ - BUG_ON((old_request->status != aborted) - && (old_request->status != completed)); + if ((old_request->status != aborted) + && (old_request->status != completed)) + dev_err(&old_request->isci_host->pdev->dev, + "%s: Bad request status (%d): tmf=%p, old_request=%p\n", + __func__, old_request->status, tmf, old_request); break; case isci_tmf_timed_out: -- cgit v0.10.2 From f22be5d8386d9da67bfe02693806fbaff7b078da Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 19 Apr 2011 15:29:25 -0700 Subject: isci: fix oem parameter header definition The element_length is 2 bytes. Reported-by: Yinghai Lu Acked-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index f079358..5598336 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -123,7 +123,7 @@ struct sci_bios_oem_param_block_hdr { uint8_t version; uint8_t preboot_source; uint8_t num_elements; - uint8_t element_length; + uint16_t element_length; uint8_t reserved[8]; } __attribute__ ((packed)); diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex index 31b5ecf..13a9655 100644 --- a/firmware/isci/isci_firmware.bin.ihex +++ b/firmware/isci/isci_firmware.bin.ihex @@ -1,16 +1,16 @@ -:10000000495343554F454D42E70017100002000089 -:10001000000000000000000101000000000000FFDF -:10002000FFCF5F01000000037C0E00037C0E000385 -:100030007C0E00037C0E00FFFFCF5F010000000379 -:100040007C0E00037C0E00037C0E00037C0E00FF80 -:10005000FFCF5F01000000037C0E00037C0E000355 -:100060007C0E00037C0E00FFFFCF5F010000000349 -:100070007C0E00037C0E00037C0E00037C0E00014E -:1000800001000000000000FFFFCF5F02000000033E -:100090007C0E00037C0E00037C0E00037C0E00FF30 -:1000A000FFCF5F02000000037C0E00037C0E000304 -:1000B0007C0E00037C0E00FFFFCF5F0200000003F8 -:1000C0007C0E00037C0E00037C0E00037C0E00FF00 -:1000D000FFCF5F02000000037C0E00037C0E0003D4 -:0700E0007C0E00037C0E0002 +:10000000495343554F454D42E80018100002000087 +:1000100000000000000000000101000000000000DE +:10002000FFFFCF5F01000000037C0E00037C0E0089 +:10003000037C0E00037C0E00FFFFCF5F0100000079 +:10004000037C0E00037C0E00037C0E00037C0E007C +:10005000FFFFCF5F01000000037C0E00037C0E0059 +:10006000037C0E00037C0E00FFFFCF5F0100000049 +:10007000037C0E00037C0E00037C0E00037C0E004C +:100080000101000000000000FFFFCF5F0200000040 +:10009000037C0E00037C0E00037C0E00037C0E002C +:1000A000FFFFCF5F02000000037C0E00037C0E0008 +:1000B000037C0E00037C0E00FFFFCF5F02000000F8 +:1000C000037C0E00037C0E00037C0E00037C0E00FC +:1000D000FFFFCF5F02000000037C0E00037C0E00D8 +:0800E000037C0E00037C0E00FE :00000001FF -- cgit v0.10.2 From 2d70de5a0f03072289015917b059c155936c894d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 20 Apr 2011 12:57:08 -0700 Subject: isci: validate oem parameters early, and fallback If the platform specifies invalid parameters warn the user and fallback to internal defaults rather than fail the driver load altogether. Reported-by: Yinghai Lu Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index cb6abcc..716abfc 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -279,6 +279,8 @@ enum sci_status scic_oem_parameters_set( struct scic_sds_controller *controller, union scic_oem_parameters *oem_parameters); +int scic_oem_parameters_validate(struct scic_sds_oem_params *oem); + /** * scic_oem_parameters_get() - This method allows the user to retreive the OEM * parameters utilized by the controller. diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 8194618..9bb78a2 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -2455,52 +2455,51 @@ enum sci_status scic_user_parameters_set( return SCI_FAILURE_INVALID_STATE; } -enum sci_status scic_oem_parameters_set( - struct scic_sds_controller *scic, - union scic_oem_parameters *scic_parms) +int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) { - u32 state = scic->state_machine.current_state_id; + int i; - if (state == SCI_BASE_CONTROLLER_STATE_RESET || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { - u16 index; - u8 combined_phy_mask = 0; + for (i = 0; i < SCI_MAX_PORTS; i++) + if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) + return -EINVAL; + + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->phys[i].sas_address.high == 0 && + oem->phys[i].sas_address.low == 0) + return -EINVAL; + + if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->ports[i].phy_mask != 0) + return -EINVAL; + } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + u8 phy_mask = 0; + + for (i = 0; i < SCI_MAX_PHYS; i++) + phy_mask |= oem->ports[i].phy_mask; + + if (phy_mask == 0) + return -EINVAL; + } else + return -EINVAL; - /* - * Validate the oem parameters. If they are not legal, then - * return a failure. */ - for (index = 0; index < SCI_MAX_PORTS; index++) { - if (scic_parms->sds1.ports[index].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } + if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + return -EINVAL; - for (index = 0; index < SCI_MAX_PHYS; index++) { - if ((scic_parms->sds1.phys[index].sas_address.high == 0) && - (scic_parms->sds1.phys[index].sas_address.low == 0)) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } + return 0; +} - if (scic_parms->sds1.controller.mode_type == - SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (scic_parms->sds1.ports[index].phy_mask != 0) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } - } else if (scic_parms->sds1.controller.mode_type == - SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - for (index = 0; index < SCI_MAX_PHYS; index++) - combined_phy_mask |= scic_parms->sds1.ports[index].phy_mask; +enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, + union scic_oem_parameters *scic_parms) +{ + u32 state = scic->state_machine.current_state_id; - if (combined_phy_mask == 0) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } else - return SCI_FAILURE_INVALID_PARAMETER_VALUE; + if (state == SCI_BASE_CONTROLLER_STATE_RESET || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { - if (scic_parms->sds1.controller.max_concurrent_dev_spin_up > - MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + if (scic_oem_parameters_validate(&scic_parms->sds1)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - scic->oem_parameters.sds1 = scic_parms->sds1; return SCI_SUCCESS; diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 5da9a69..015ce94 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -489,6 +489,16 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic else orom = isci_request_oprom(pdev); + for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) { + if (scic_oem_parameters_validate(&orom->ctrl[i])) { + dev_warn(&pdev->dev, + "[%d]: invalid oem parameters detected, falling back to firmware\n", i); + devm_kfree(&pdev->dev, orom); + orom = NULL; + break; + } + } + if (!orom) { source = "(firmware)"; orom = isci_request_firmware(pdev, fw); -- cgit v0.10.2 From e2023b8735956bb78f167d0fdc575364e69b02c4 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 21 Apr 2011 05:34:49 +0000 Subject: isci: replace this_* and the_* variables with more meaningful names Removed any instances of the_* and this_* to variable names that are more meaningful and tell us what they actually are. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_pool.h b/drivers/scsi/isci/core/sci_pool.h index c0d2ea3..016ec83 100644 --- a/drivers/scsi/isci/core/sci_pool.h +++ b/drivers/scsi/isci/core/sci_pool.h @@ -73,8 +73,8 @@ * * Private operation for the pool */ -#define SCI_POOL_INCREMENT(this_pool, index) \ - (((index) + 1) == (this_pool).size ? 0 : (index) + 1) +#define SCI_POOL_INCREMENT(pool, index) \ + (((index) + 1) == (pool).size ? 0 : (index) + 1) /** * SCI_POOL_CREATE() - @@ -98,8 +98,8 @@ * This macro evaluates the pool and returns true if the pool is empty. If the * pool is empty the user should not perform any get operation on the pool. */ -#define sci_pool_empty(this_pool) \ - ((this_pool).get == (this_pool).put) +#define sci_pool_empty(pool) \ + ((pool).get == (pool).put) /** * sci_pool_full() - @@ -107,8 +107,8 @@ * This macro evaluates the pool and returns true if the pool is full. If the * pool is full the user should not perform any put operation. */ -#define sci_pool_full(this_pool) \ - (SCI_POOL_INCREMENT(this_pool, (this_pool).put) == (this_pool).get) +#define sci_pool_full(pool) \ + (SCI_POOL_INCREMENT(pool, (pool).put) == (pool).get) /** * sci_pool_size() - @@ -118,25 +118,25 @@ * pointers can be written simultaneously by different users. As a result, * this macro subtracts 1 from the internal size */ -#define sci_pool_size(this_pool) \ - ((this_pool).size - 1) +#define sci_pool_size(pool) \ + ((pool).size - 1) /** * sci_pool_count() - * * This macro indicates the number of elements currently contained in the pool. */ -#define sci_pool_count(this_pool) \ +#define sci_pool_count(pool) \ (\ - sci_pool_empty((this_pool)) \ + sci_pool_empty((pool)) \ ? 0 \ : (\ - sci_pool_full((this_pool)) \ - ? sci_pool_size((this_pool)) \ + sci_pool_full((pool)) \ + ? sci_pool_size((pool)) \ : (\ - (this_pool).get > (this_pool).put \ - ? ((this_pool).size - (this_pool).get + (this_pool).put) \ - : ((this_pool).put - (this_pool).get) \ + (pool).get > (pool).put \ + ? ((pool).size - (pool).get + (pool).put) \ + : ((pool).put - (pool).get) \ ) \ ) \ ) @@ -146,11 +146,11 @@ * * This macro initializes the pool to an empty condition. */ -#define sci_pool_initialize(this_pool) \ +#define sci_pool_initialize(pool) \ { \ - (this_pool).size = (sizeof((this_pool).array) / sizeof((this_pool).array[0])); \ - (this_pool).get = 0; \ - (this_pool).put = 0; \ + (pool).size = (sizeof((pool).array) / sizeof((pool).array[0])); \ + (pool).get = 0; \ + (pool).put = 0; \ } /** @@ -159,10 +159,10 @@ * This macro will get the next free element from the pool. This should only be * called if the pool is not empty. */ -#define sci_pool_get(this_pool, my_value) \ +#define sci_pool_get(pool, my_value) \ { \ - (my_value) = (this_pool).array[(this_pool).get]; \ - (this_pool).get = SCI_POOL_INCREMENT((this_pool), (this_pool).get); \ + (my_value) = (pool).array[(pool).get]; \ + (pool).get = SCI_POOL_INCREMENT((pool), (pool).get); \ } /** @@ -171,10 +171,10 @@ * This macro will put the value into the pool. This should only be called if * the pool is not full. */ -#define sci_pool_put(this_pool, the_value) \ +#define sci_pool_put(pool, value) \ { \ - (this_pool).array[(this_pool).put] = (the_value); \ - (this_pool).put = SCI_POOL_INCREMENT((this_pool), (this_pool).put); \ + (pool).array[(pool).put] = (value); \ + (pool).put = SCI_POOL_INCREMENT((pool), (pool).put); \ } /** @@ -183,16 +183,16 @@ * This macro will search the pool and remove any elements in the pool matching * the supplied value. This method can only be utilized on pools */ -#define sci_pool_erase(this_pool, type, the_value) \ +#define sci_pool_erase(pool, type, value) \ { \ type tmp_value; \ u32 index; \ - u32 element_count = sci_pool_count((this_pool)); \ + u32 element_count = sci_pool_count((pool)); \ \ for (index = 0; index < element_count; index++) { \ - sci_pool_get((this_pool), tmp_value); \ - if (tmp_value != (the_value)) \ - sci_pool_put((this_pool), tmp_value); \ + sci_pool_get((pool), tmp_value); \ + if (tmp_value != (value)) \ + sci_pool_put((pool), tmp_value); \ } \ } diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 9bb78a2..63f4cd1 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -290,7 +290,7 @@ int scic_controller_mem_init(struct scic_sds_controller *scic) /** * This method initializes the task context data for the controller. - * @this_controller: + * @scic: * */ static void @@ -321,22 +321,22 @@ scic_sds_controller_assign_task_entries(struct scic_sds_controller *controller) * */ static void scic_sds_controller_initialize_completion_queue( - struct scic_sds_controller *this_controller) + struct scic_sds_controller *scic) { u32 index; u32 completion_queue_control_value; u32 completion_queue_get_value; u32 completion_queue_put_value; - this_controller->completion_queue_get = 0; + scic->completion_queue_get = 0; completion_queue_control_value = ( - SMU_CQC_QUEUE_LIMIT_SET(this_controller->completion_queue_entries - 1) - | SMU_CQC_EVENT_LIMIT_SET(this_controller->completion_event_entries - 1) + SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1) + | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1) ); writel(completion_queue_control_value, - &this_controller->smu_registers->completion_queue_control); + &scic->smu_registers->completion_queue_control); /* Set the completion queue get pointer and enable the queue */ @@ -348,7 +348,7 @@ static void scic_sds_controller_initialize_completion_queue( ); writel(completion_queue_get_value, - &this_controller->smu_registers->completion_queue_get); + &scic->smu_registers->completion_queue_get); /* Set the completion queue put pointer */ completion_queue_put_value = ( @@ -357,16 +357,15 @@ static void scic_sds_controller_initialize_completion_queue( ); writel(completion_queue_put_value, - &this_controller->smu_registers->completion_queue_put); - + &scic->smu_registers->completion_queue_put); /* Initialize the cycle bit of the completion queue entries */ - for (index = 0; index < this_controller->completion_queue_entries; index++) { + for (index = 0; index < scic->completion_queue_entries; index++) { /* * If get.cycle_bit != completion_queue.cycle_bit * its not a valid completion queue entry * so at system start all entries are invalid */ - this_controller->completion_queue[index] = 0x80000000; + scic->completion_queue[index] = 0x80000000; } } @@ -376,7 +375,7 @@ static void scic_sds_controller_initialize_completion_queue( * */ static void scic_sds_controller_initialize_unsolicited_frame_queue( - struct scic_sds_controller *this_controller) + struct scic_sds_controller *scic) { u32 frame_queue_control_value; u32 frame_queue_get_value; @@ -384,10 +383,11 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue( /* Write the queue size */ frame_queue_control_value = - SCU_UFQC_GEN_VAL(QUEUE_SIZE, this_controller->uf_control.address_table.count); + SCU_UFQC_GEN_VAL(QUEUE_SIZE, + scic->uf_control.address_table.count); writel(frame_queue_control_value, - &this_controller->scu_registers->sdma.unsolicited_frame_queue_control); + &scic->scu_registers->sdma.unsolicited_frame_queue_control); /* Setup the get pointer for the unsolicited frame queue */ frame_queue_get_value = ( @@ -396,11 +396,11 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue( ); writel(frame_queue_get_value, - &this_controller->scu_registers->sdma.unsolicited_frame_get_pointer); + &scic->scu_registers->sdma.unsolicited_frame_get_pointer); /* Setup the put pointer for the unsolicited frame queue */ frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); writel(frame_queue_put_value, - &this_controller->scu_registers->sdma.unsolicited_frame_put_pointer); + &scic->scu_registers->sdma.unsolicited_frame_put_pointer); } /** @@ -409,16 +409,17 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue( * */ static void scic_sds_controller_enable_port_task_scheduler( - struct scic_sds_controller *this_controller) + struct scic_sds_controller *scic) { u32 port_task_scheduler_value; port_task_scheduler_value = - readl(&this_controller->scu_registers->peg0.ptsg.control); + readl(&scic->scu_registers->peg0.ptsg.control); port_task_scheduler_value |= - (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); + (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | + SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); writel(port_task_scheduler_value, - &this_controller->scu_registers->peg0.ptsg.control); + &scic->scu_registers->peg0.ptsg.control); } /** @@ -564,7 +565,7 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s * This method will attempt to transition into the ready state for the * controller and indicate that the controller start operation has completed * if all criteria are met. - * @this_controller: This parameter indicates the controller object for which + * @scic: This parameter indicates the controller object for which * to transition to ready. * @status: This parameter indicates the status value to be pass into the call * to scic_cb_controller_start_complete(). @@ -858,30 +859,30 @@ static void scic_sds_controller_power_control_timer_restart(struct scic_sds_cont static void scic_sds_controller_power_control_timer_handler( void *controller) { - struct scic_sds_controller *this_controller; + struct scic_sds_controller *scic; - this_controller = (struct scic_sds_controller *)controller; + scic = (struct scic_sds_controller *)controller; - this_controller->power_control.phys_granted_power = 0; + scic->power_control.phys_granted_power = 0; - if (this_controller->power_control.phys_waiting == 0) { - this_controller->power_control.timer_started = false; + if (scic->power_control.phys_waiting == 0) { + scic->power_control.timer_started = false; } else { - struct scic_sds_phy *the_phy = NULL; + struct scic_sds_phy *sci_phy = NULL; u8 i; for (i = 0; (i < SCI_MAX_PHYS) - && (this_controller->power_control.phys_waiting != 0); + && (scic->power_control.phys_waiting != 0); i++) { - if (this_controller->power_control.requesters[i] != NULL) { - if (this_controller->power_control.phys_granted_power < - this_controller->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { - the_phy = this_controller->power_control.requesters[i]; - this_controller->power_control.requesters[i] = NULL; - this_controller->power_control.phys_waiting--; - this_controller->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(the_phy); + if (scic->power_control.requesters[i] != NULL) { + if (scic->power_control.phys_granted_power < + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + sci_phy = scic->power_control.requesters[i]; + scic->power_control.requesters[i] = NULL; + scic->power_control.phys_waiting--; + scic->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(sci_phy); } else { break; } @@ -892,56 +893,56 @@ static void scic_sds_controller_power_control_timer_handler( * It doesn't matter if the power list is empty, we need to start the * timer in case another phy becomes ready. */ - scic_sds_controller_power_control_timer_start(this_controller); + scic_sds_controller_power_control_timer_start(scic); } } /** * This method inserts the phy in the stagger spinup control queue. - * @this_controller: + * @scic: * * */ void scic_sds_controller_power_control_queue_insert( - struct scic_sds_controller *this_controller, - struct scic_sds_phy *the_phy) + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy) { - BUG_ON(the_phy == NULL); + BUG_ON(sci_phy == NULL); - if (this_controller->power_control.phys_granted_power < - this_controller->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { - this_controller->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(the_phy); + if (scic->power_control.phys_granted_power < + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + scic->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(sci_phy); /* * stop and start the power_control timer. When the timer fires, the * no_of_phys_granted_power will be set to 0 */ - scic_sds_controller_power_control_timer_restart(this_controller); + scic_sds_controller_power_control_timer_restart(scic); } else { /* Add the phy in the waiting list */ - this_controller->power_control.requesters[the_phy->phy_index] = the_phy; - this_controller->power_control.phys_waiting++; + scic->power_control.requesters[sci_phy->phy_index] = sci_phy; + scic->power_control.phys_waiting++; } } /** * This method removes the phy from the stagger spinup control queue. - * @this_controller: + * @scic: * * */ void scic_sds_controller_power_control_queue_remove( - struct scic_sds_controller *this_controller, - struct scic_sds_phy *the_phy) + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy) { - BUG_ON(the_phy == NULL); + BUG_ON(sci_phy == NULL); - if (this_controller->power_control.requesters[the_phy->phy_index] != NULL) { - this_controller->power_control.phys_waiting--; + if (scic->power_control.requesters[sci_phy->phy_index] != NULL) { + scic->power_control.phys_waiting--; } - this_controller->power_control.requesters[the_phy->phy_index] = NULL; + scic->power_control.requesters[sci_phy->phy_index] = NULL; } /* @@ -952,23 +953,20 @@ void scic_sds_controller_power_control_queue_remove( /** * This method returns a true value if the completion queue has entries that * can be processed - * @this_controller: + * @scic: * * bool true if the completion queue has entries to process false if the * completion queue has no entries to process */ static bool scic_sds_controller_completion_queue_has_entries( - struct scic_sds_controller *this_controller) + struct scic_sds_controller *scic) { - u32 get_value = this_controller->completion_queue_get; + u32 get_value = scic->completion_queue_get; u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; - if ( - NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) - == COMPLETION_QUEUE_CYCLE_BIT(this_controller->completion_queue[get_index]) - ) { + if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) == + COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])) return true; - } return false; } @@ -976,19 +974,19 @@ static bool scic_sds_controller_completion_queue_has_entries( /** * This method processes a task completion notification. This is called from * within the controller completion handler. - * @this_controller: + * @scic: * @completion_entry: * */ static void scic_sds_controller_task_completion( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u32 completion_entry) { u32 index; struct scic_sds_request *io_request; index = SCU_GET_COMPLETION_INDEX(completion_entry); - io_request = this_controller->io_request_table[index]; + io_request = scic->io_request_table[index]; /* Make sure that we really want to process this IO request */ if ( @@ -996,7 +994,7 @@ static void scic_sds_controller_task_completion( && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) && ( scic_sds_io_tag_get_sequence(io_request->io_tag) - == this_controller->io_request_sequence[index] + == scic->io_request_sequence[index] ) ) { /* Yep this is a valid io request pass it along to the io request handler */ @@ -1007,12 +1005,12 @@ static void scic_sds_controller_task_completion( /** * This method processes an SDMA completion event. This is called from within * the controller completion handler. - * @this_controller: + * @scic: * @completion_entry: * */ static void scic_sds_controller_sdma_completion( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u32 completion_entry) { u32 index; @@ -1024,8 +1022,8 @@ static void scic_sds_controller_sdma_completion( switch (scu_get_command_request_type(completion_entry)) { case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: - io_request = this_controller->io_request_table[index]; - dev_warn(scic_to_dev(this_controller), + io_request = scic->io_request_table[index]; + dev_warn(scic_to_dev(scic), "%s: SCIC SDS Completion type SDMA %x for io request " "%p\n", __func__, @@ -1039,8 +1037,8 @@ static void scic_sds_controller_sdma_completion( case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: - device = this_controller->device_table[index]; - dev_warn(scic_to_dev(this_controller), + device = scic->device_table[index]; + dev_warn(scic_to_dev(scic), "%s: SCIC SDS Completion type SDMA %x for remote " "device %p\n", __func__, @@ -1052,7 +1050,7 @@ static void scic_sds_controller_sdma_completion( break; default: - dev_warn(scic_to_dev(this_controller), + dev_warn(scic_to_dev(scic), "%s: SCIC SDS Completion unknown SDMA completion " "type %x\n", __func__, @@ -1064,14 +1062,14 @@ static void scic_sds_controller_sdma_completion( /** * - * @this_controller: + * @scic: * @completion_entry: * * This method processes an unsolicited frame message. This is called from * within the controller completion handler. none */ static void scic_sds_controller_unsolicited_frame( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u32 completion_entry) { u32 index; @@ -1086,8 +1084,8 @@ static void scic_sds_controller_unsolicited_frame( frame_index = SCU_GET_FRAME_INDEX(completion_entry); frame_header - = this_controller->uf_control.buffers.array[frame_index].header; - this_controller->uf_control.buffers.array[frame_index].state + = scic->uf_control.buffers.array[frame_index].header; + scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; if (SCU_GET_FRAME_ERROR(completion_entry)) { @@ -1095,13 +1093,13 @@ static void scic_sds_controller_unsolicited_frame( * / @todo If the IAF frame or SIGNATURE FIS frame has an error will * / this cause a problem? We expect the phy initialization will * / fail if there is an error in the frame. */ - scic_sds_controller_release_frame(this_controller, frame_index); + scic_sds_controller_release_frame(scic, frame_index); return; } if (frame_header->is_address_frame) { index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &this_controller->phy_table[index]; + phy = &scic->phy_table[index]; if (phy != NULL) { result = scic_sds_phy_frame_handler(phy, frame_index); } @@ -1115,18 +1113,18 @@ static void scic_sds_controller_unsolicited_frame( * device that has not yet been created. In either case forwared * the frame to the PE and let it take care of the frame data. */ index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &this_controller->phy_table[index]; + phy = &scic->phy_table[index]; result = scic_sds_phy_frame_handler(phy, frame_index); } else { - if (index < this_controller->remote_node_entries) - device = this_controller->device_table[index]; + if (index < scic->remote_node_entries) + device = scic->device_table[index]; else device = NULL; if (device != NULL) result = scic_sds_remote_device_frame_handler(device, frame_index); else - scic_sds_controller_release_frame(this_controller, frame_index); + scic_sds_controller_release_frame(scic, frame_index); } } @@ -1140,12 +1138,12 @@ static void scic_sds_controller_unsolicited_frame( /** * This method processes an event completion entry. This is called from within * the controller completion handler. - * @this_controller: + * @scic: * @completion_entry: * */ static void scic_sds_controller_event_completion( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u32 completion_entry) { u32 index; @@ -1158,11 +1156,11 @@ static void scic_sds_controller_event_completion( switch (scu_get_event_type(completion_entry)) { case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: /* / @todo The driver did something wrong and we need to fix the condtion. */ - dev_err(scic_to_dev(this_controller), + dev_err(scic_to_dev(scic), "%s: SCIC Controller 0x%p received SMU command error " "0x%x\n", __func__, - this_controller, + scic, completion_entry); break; @@ -1172,16 +1170,16 @@ static void scic_sds_controller_event_completion( /* * / @todo This is a hardware failure and its likely that we want to * / reset the controller. */ - dev_err(scic_to_dev(this_controller), + dev_err(scic_to_dev(scic), "%s: SCIC Controller 0x%p received fatal controller " "event 0x%x\n", __func__, - this_controller, + scic, completion_entry); break; case SCU_EVENT_TYPE_TRANSPORT_ERROR: - io_request = this_controller->io_request_table[index]; + io_request = scic->io_request_table[index]; scic_sds_io_request_event_handler(io_request, completion_entry); break; @@ -1189,31 +1187,31 @@ static void scic_sds_controller_event_completion( switch (scu_get_event_specifier(completion_entry)) { case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: - io_request = this_controller->io_request_table[index]; + io_request = scic->io_request_table[index]; if (io_request != NULL) scic_sds_io_request_event_handler(io_request, completion_entry); else - dev_warn(scic_to_dev(this_controller), + dev_warn(scic_to_dev(scic), "%s: SCIC Controller 0x%p received " "event 0x%x for io request object " "that doesnt exist.\n", __func__, - this_controller, + scic, completion_entry); break; case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: - device = this_controller->device_table[index]; + device = scic->device_table[index]; if (device != NULL) scic_sds_remote_device_event_handler(device, completion_entry); else - dev_warn(scic_to_dev(this_controller), + dev_warn(scic_to_dev(scic), "%s: SCIC Controller 0x%p received " "event 0x%x for remote device object " "that doesnt exist.\n", __func__, - this_controller, + scic, completion_entry); break; @@ -1230,32 +1228,32 @@ static void scic_sds_controller_event_completion( * we get the event notification. This is a type 4 event. */ case SCU_EVENT_TYPE_OSSP_EVENT: index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &this_controller->phy_table[index]; + phy = &scic->phy_table[index]; scic_sds_phy_event_handler(phy, completion_entry); break; case SCU_EVENT_TYPE_RNC_SUSPEND_TX: case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: case SCU_EVENT_TYPE_RNC_OPS_MISC: - if (index < this_controller->remote_node_entries) { - device = this_controller->device_table[index]; + if (index < scic->remote_node_entries) { + device = scic->device_table[index]; if (device != NULL) scic_sds_remote_device_event_handler(device, completion_entry); } else - dev_err(scic_to_dev(this_controller), + dev_err(scic_to_dev(scic), "%s: SCIC Controller 0x%p received event 0x%x " "for remote device object 0x%0x that doesnt " "exist.\n", __func__, - this_controller, + scic, completion_entry, index); break; default: - dev_warn(scic_to_dev(this_controller), + dev_warn(scic_to_dev(scic), "%s: SCIC Controller received unknown event code %x\n", __func__, completion_entry); @@ -1265,11 +1263,11 @@ static void scic_sds_controller_event_completion( /** * This method is a private routine for processing the completion queue entries. - * @this_controller: + * @scic: * */ static void scic_sds_controller_process_completions( - struct scic_sds_controller *this_controller) + struct scic_sds_controller *scic) { u32 completion_count = 0; u32 completion_entry; @@ -1278,60 +1276,60 @@ static void scic_sds_controller_process_completions( u32 event_index; u32 event_cycle; - dev_dbg(scic_to_dev(this_controller), + dev_dbg(scic_to_dev(scic), "%s: completion queue begining get:0x%08x\n", __func__, - this_controller->completion_queue_get); + scic->completion_queue_get); /* Get the component parts of the completion queue */ - get_index = NORMALIZE_GET_POINTER(this_controller->completion_queue_get); - get_cycle = SMU_CQGR_CYCLE_BIT & this_controller->completion_queue_get; + get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get); + get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get; - event_index = NORMALIZE_EVENT_POINTER(this_controller->completion_queue_get); - event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & this_controller->completion_queue_get; + event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get); + event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get; while ( NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) - == COMPLETION_QUEUE_CYCLE_BIT(this_controller->completion_queue[get_index]) + == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]) ) { completion_count++; - completion_entry = this_controller->completion_queue[get_index]; - INCREMENT_COMPLETION_QUEUE_GET(this_controller, get_index, get_cycle); + completion_entry = scic->completion_queue[get_index]; + INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle); - dev_dbg(scic_to_dev(this_controller), + dev_dbg(scic_to_dev(scic), "%s: completion queue entry:0x%08x\n", __func__, completion_entry); switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { case SCU_COMPLETION_TYPE_TASK: - scic_sds_controller_task_completion(this_controller, completion_entry); + scic_sds_controller_task_completion(scic, completion_entry); break; case SCU_COMPLETION_TYPE_SDMA: - scic_sds_controller_sdma_completion(this_controller, completion_entry); + scic_sds_controller_sdma_completion(scic, completion_entry); break; case SCU_COMPLETION_TYPE_UFI: - scic_sds_controller_unsolicited_frame(this_controller, completion_entry); + scic_sds_controller_unsolicited_frame(scic, completion_entry); break; case SCU_COMPLETION_TYPE_EVENT: - INCREMENT_EVENT_QUEUE_GET(this_controller, event_index, event_cycle); - scic_sds_controller_event_completion(this_controller, completion_entry); + INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); + scic_sds_controller_event_completion(scic, completion_entry); break; case SCU_COMPLETION_TYPE_NOTIFY: /* * Presently we do the same thing with a notify event that we do with the * other event codes. */ - INCREMENT_EVENT_QUEUE_GET(this_controller, event_index, event_cycle); - scic_sds_controller_event_completion(this_controller, completion_entry); + INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); + scic_sds_controller_event_completion(scic, completion_entry); break; default: - dev_warn(scic_to_dev(this_controller), + dev_warn(scic_to_dev(scic), "%s: SCIC Controller received unknown " "completion type %x\n", __func__, @@ -1342,21 +1340,23 @@ static void scic_sds_controller_process_completions( /* Update the get register if we completed one or more entries */ if (completion_count > 0) { - this_controller->completion_queue_get = - SMU_CQGR_GEN_BIT(ENABLE) - | SMU_CQGR_GEN_BIT(EVENT_ENABLE) - | event_cycle | SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) - | get_cycle | SMU_CQGR_GEN_VAL(POINTER, get_index); + scic->completion_queue_get = + SMU_CQGR_GEN_BIT(ENABLE) | + SMU_CQGR_GEN_BIT(EVENT_ENABLE) | + event_cycle | + SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) | + get_cycle | + SMU_CQGR_GEN_VAL(POINTER, get_index); - writel(this_controller->completion_queue_get, - &this_controller->smu_registers->completion_queue_get); + writel(scic->completion_queue_get, + &scic->smu_registers->completion_queue_get); } - dev_dbg(scic_to_dev(this_controller), + dev_dbg(scic_to_dev(scic), "%s: completion queue ending get:0x%08x\n", __func__, - this_controller->completion_queue_get); + scic->completion_queue_get); } @@ -1540,29 +1540,29 @@ void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, /** * This method will write to the SCU PCP register the request value. The method * is used to suspend/resume ports, devices, and phys. - * @this_controller: + * @scic: * * */ void scic_sds_controller_post_request( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u32 request) { - dev_dbg(scic_to_dev(this_controller), + dev_dbg(scic_to_dev(scic), "%s: SCIC Controller 0x%p post request 0x%08x\n", __func__, - this_controller, + scic, request); - writel(request, &this_controller->smu_registers->post_context_port); + writel(request, &scic->smu_registers->post_context_port); } /** * This method will copy the soft copy of the task context into the physical * memory accessible by the controller. - * @this_controller: This parameter specifies the controller for which to copy + * @scic: This parameter specifies the controller for which to copy * the task context. - * @this_request: This parameter specifies the request for which the task + * @sci_req: This parameter specifies the request for which the task * context is being copied. * * After this call is made the SCIC_SDS_IO_REQUEST object will always point to @@ -1571,43 +1571,40 @@ void scic_sds_controller_post_request( * memory). none */ void scic_sds_controller_copy_task_context( - struct scic_sds_controller *this_controller, - struct scic_sds_request *this_request) + struct scic_sds_controller *scic, + struct scic_sds_request *sci_req) { struct scu_task_context *task_context_buffer; task_context_buffer = scic_sds_controller_get_task_context_buffer( - this_controller, this_request->io_tag - ); + scic, sci_req->io_tag); - memcpy( - task_context_buffer, - this_request->task_context_buffer, - SCI_FIELD_OFFSET(struct scu_task_context, sgl_snapshot_ac) - ); + memcpy(task_context_buffer, + sci_req->task_context_buffer, + SCI_FIELD_OFFSET(struct scu_task_context, sgl_snapshot_ac)); /* * Now that the soft copy of the TC has been copied into the TC * table accessible by the silicon. Thus, any further changes to * the TC (e.g. TC termination) occur in the appropriate location. */ - this_request->task_context_buffer = task_context_buffer; + sci_req->task_context_buffer = task_context_buffer; } /** * This method returns the task context buffer for the given io tag. - * @this_controller: + * @scic: * @io_tag: * * struct scu_task_context* */ struct scu_task_context *scic_sds_controller_get_task_context_buffer( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u16 io_tag ) { u16 task_index = scic_sds_io_tag_get_index(io_tag); - if (task_index < this_controller->task_context_entries) { - return &this_controller->task_context_table[task_index]; + if (task_index < scic->task_context_entries) { + return &scic->task_context_table[task_index]; } return NULL; @@ -1615,7 +1612,7 @@ struct scu_task_context *scic_sds_controller_get_task_context_buffer( /** * This method returnst the sequence value from the io tag value - * @this_controller: + * @scic: * @io_tag: * * u16 @@ -1623,13 +1620,13 @@ struct scu_task_context *scic_sds_controller_get_task_context_buffer( /** * This method returns the IO request associated with the tag value - * @this_controller: + * @scic: * @io_tag: * * SCIC_SDS_IO_REQUEST_T* NULL if there is no valid IO request at the tag value */ struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u16 io_tag ) { u16 task_index; @@ -1637,12 +1634,12 @@ struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( task_index = scic_sds_io_tag_get_index(io_tag); - if (task_index < this_controller->task_context_entries) { - if (this_controller->io_request_table[task_index] != NULL) { + if (task_index < scic->task_context_entries) { + if (scic->io_request_table[task_index] != NULL) { task_sequence = scic_sds_io_tag_get_sequence(io_tag); - if (task_sequence == this_controller->io_request_sequence[task_index]) { - return this_controller->io_request_table[task_index]; + if (task_sequence == scic->io_request_sequence[task_index]) { + return scic->io_request_table[task_index]; } } } @@ -1654,9 +1651,9 @@ struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( * This method allocates remote node index and the reserves the remote node * context space for use. This method can fail if there are no more remote * node index available. - * @this_controller: This is the controller object which contains the set of + * @scic: This is the controller object which contains the set of * free remote node ids - * @the_devce: This is the device object which is requesting the a remote node + * @sci_dev: This is the device object which is requesting the a remote node * id * @node_id: This is the remote node id that is assinged to the device if one * is available @@ -1665,19 +1662,19 @@ struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( * node index available. */ enum sci_status scic_sds_controller_allocate_remote_node_context( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *the_device, + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, u16 *node_id) { u16 node_index; - u32 remote_node_count = scic_sds_remote_device_node_count(the_device); + u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); node_index = scic_sds_remote_node_table_allocate_remote_node( - &this_controller->available_remote_nodes, remote_node_count + &scic->available_remote_nodes, remote_node_count ); if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - this_controller->device_table[node_index] = the_device; + scic->device_table[node_index] = sci_dev; *node_id = node_index; @@ -1691,23 +1688,23 @@ enum sci_status scic_sds_controller_allocate_remote_node_context( * This method frees the remote node index back to the available pool. Once * this is done the remote node context buffer is no longer valid and can * not be used. - * @this_controller: - * @the_device: + * @scic: + * @sci_dev: * @node_id: * */ void scic_sds_controller_free_remote_node_context( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *the_device, + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, u16 node_id) { - u32 remote_node_count = scic_sds_remote_device_node_count(the_device); + u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); - if (this_controller->device_table[node_id] == the_device) { - this_controller->device_table[node_id] = NULL; + if (scic->device_table[node_id] == sci_dev) { + scic->device_table[node_id] = NULL; scic_sds_remote_node_table_release_remote_node_index( - &this_controller->available_remote_nodes, remote_node_count, node_id + &scic->available_remote_nodes, remote_node_count, node_id ); } } @@ -1715,20 +1712,20 @@ void scic_sds_controller_free_remote_node_context( /** * This method returns the union scu_remote_node_context for the specified remote * node id. - * @this_controller: + * @scic: * @node_id: * * union scu_remote_node_context* */ union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u16 node_id ) { if ( - (node_id < this_controller->remote_node_entries) - && (this_controller->device_table[node_id] != NULL) + (node_id < scic->remote_node_entries) + && (scic->device_table[node_id] != NULL) ) { - return &this_controller->remote_node_context_table[node_id]; + return &scic->remote_node_context_table[node_id]; } return NULL; @@ -1767,18 +1764,18 @@ void scic_sds_controller_copy_sata_response( * re-use by the hardware. The data contained in the frame header and frame * buffer is no longer valid. The UF queue get pointer is only updated if UF * control indicates this is appropriate. - * @this_controller: + * @scic: * @frame_index: * */ void scic_sds_controller_release_frame( - struct scic_sds_controller *this_controller, + struct scic_sds_controller *scic, u32 frame_index) { if (scic_sds_unsolicited_frame_control_release_frame( - &this_controller->uf_control, frame_index) == true) - writel(this_controller->uf_control.get, - &this_controller->scu_registers->sdma.unsolicited_frame_get_pointer); + &scic->uf_control, frame_index) == true) + writel(scic->uf_control.get, + &scic->scu_registers->sdma.unsolicited_frame_get_pointer); } /** @@ -2888,11 +2885,11 @@ enum sci_status scic_controller_start(struct scic_sds_controller *scic, static void scic_sds_controller_initial_state_enter( struct sci_base_object *object) { - struct scic_sds_controller *this_controller; + struct scic_sds_controller *scic; - this_controller = (struct scic_sds_controller *)object; + scic = (struct scic_sds_controller *)object; - sci_base_state_machine_change_state(&this_controller->state_machine, + sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_RESET); } @@ -2925,13 +2922,13 @@ static inline void scic_sds_controller_starting_state_exit( static void scic_sds_controller_ready_state_enter( struct sci_base_object *object) { - struct scic_sds_controller *this_controller; + struct scic_sds_controller *scic; - this_controller = (struct scic_sds_controller *)object; + scic = (struct scic_sds_controller *)object; /* set the default interrupt coalescence number and timeout value. */ scic_controller_set_interrupt_coalescence( - this_controller, 0x10, 250); + scic, 0x10, 250); } /** @@ -2945,12 +2942,12 @@ static void scic_sds_controller_ready_state_enter( static void scic_sds_controller_ready_state_exit( struct sci_base_object *object) { - struct scic_sds_controller *this_controller; + struct scic_sds_controller *scic; - this_controller = (struct scic_sds_controller *)object; + scic = (struct scic_sds_controller *)object; /* disable interrupt coalescence. */ - scic_controller_set_interrupt_coalescence(this_controller, 0, 0); + scic_controller_set_interrupt_coalescence(scic, 0, 0); } /** @@ -2966,14 +2963,14 @@ static void scic_sds_controller_ready_state_exit( static void scic_sds_controller_stopping_state_enter( struct sci_base_object *object) { - struct scic_sds_controller *this_controller; + struct scic_sds_controller *scic; - this_controller = (struct scic_sds_controller *)object; + scic = (struct scic_sds_controller *)object; /* Stop all of the components for this controller */ - scic_sds_controller_stop_phys(this_controller); - scic_sds_controller_stop_ports(this_controller); - scic_sds_controller_stop_devices(this_controller); + scic_sds_controller_stop_phys(scic); + scic_sds_controller_stop_ports(scic); + scic_sds_controller_stop_devices(scic); } /** diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 9a646e5..4bb9a43 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -542,12 +542,12 @@ void scic_sds_controller_copy_sata_response( enum sci_status scic_sds_controller_allocate_remote_node_context( struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *the_device, + struct scic_sds_remote_device *sci_dev, u16 *node_id); void scic_sds_controller_free_remote_node_context( struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *the_device, + struct scic_sds_remote_device *sci_dev, u16 node_id); union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( @@ -565,25 +565,25 @@ struct scu_task_context *scic_sds_controller_get_task_context_buffer( void scic_sds_controller_power_control_queue_insert( struct scic_sds_controller *this_controller, - struct scic_sds_phy *the_phy); + struct scic_sds_phy *sci_phy); void scic_sds_controller_power_control_queue_remove( struct scic_sds_controller *this_controller, - struct scic_sds_phy *the_phy); + struct scic_sds_phy *sci_phy); void scic_sds_controller_link_up( struct scic_sds_controller *this_controller, - struct scic_sds_port *the_port, - struct scic_sds_phy *the_phy); + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); void scic_sds_controller_link_down( struct scic_sds_controller *this_controller, - struct scic_sds_port *the_port, - struct scic_sds_phy *the_phy); + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); void scic_sds_controller_remote_device_stopped( struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *the_device); + struct scic_sds_remote_device *sci_dev); void scic_sds_controller_copy_task_context( struct scic_sds_controller *this_controller, diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 40176f0..34bd3b2 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -84,26 +84,29 @@ enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) /** * This method will initialize the phy transport layer registers - * @this_phy: + * @sci_phy: * @transport_layer_registers * * enum sci_status */ static enum sci_status scic_sds_phy_transport_layer_initialization( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, struct scu_transport_layer_registers __iomem *transport_layer_registers) { u32 tl_control; - this_phy->transport_layer_registers = transport_layer_registers; + sci_phy->transport_layer_registers = transport_layer_registers; writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, - &this_phy->transport_layer_registers->stp_rni); + &sci_phy->transport_layer_registers->stp_rni); - /* Hardware team recommends that we enable the STP prefetch for all transports */ - tl_control = readl(&this_phy->transport_layer_registers->control); + /* + * Hardware team recommends that we enable the STP prefetch for all + * transports + */ + tl_control = readl(&sci_phy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); - writel(tl_control, &this_phy->transport_layer_registers->control); + writel(tl_control, &sci_phy->transport_layer_registers->control); return SCI_SUCCESS; } @@ -284,7 +287,7 @@ static void scic_sds_phy_sata_timeout(void *phy) * This method returns the port currently containing this phy. If the phy is * currently contained by the dummy port, then the phy is considered to not * be part of a port. - * @this_phy: This parameter specifies the phy for which to retrieve the + * @sci_phy: This parameter specifies the phy for which to retrieve the * containing port. * * This method returns a handle to a port that contains the supplied phy. @@ -293,30 +296,30 @@ static void scic_sds_phy_sata_timeout(void *phy) * values indicate a handle/pointer to the port containing the phy. */ struct scic_sds_port *scic_sds_phy_get_port( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { - if (scic_sds_port_get_index(this_phy->owning_port) == SCIC_SDS_DUMMY_PORT) + if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT) return NULL; - return this_phy->owning_port; + return sci_phy->owning_port; } /** * This method will assign a port to the phy object. - * @out]: this_phy This parameter specifies the phy for which to assign a port + * @out]: sci_phy This parameter specifies the phy for which to assign a port * object. * * */ void scic_sds_phy_set_port( - struct scic_sds_phy *this_phy, - struct scic_sds_port *the_port) + struct scic_sds_phy *sci_phy, + struct scic_sds_port *sci_port) { - this_phy->owning_port = the_port; + sci_phy->owning_port = sci_port; - if (this_phy->bcn_received_while_port_unassigned) { - this_phy->bcn_received_while_port_unassigned = false; - scic_sds_port_broadcast_change_received(this_phy->owning_port, this_phy); + if (sci_phy->bcn_received_while_port_unassigned) { + sci_phy->bcn_received_while_port_unassigned = false; + scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); } } @@ -362,123 +365,125 @@ enum sci_status scic_sds_phy_initialize( /** * This method assigns the direct attached device ID for this phy. * - * @this_phy The phy for which the direct attached device id is to + * @sci_phy The phy for which the direct attached device id is to * be assigned. * @device_id The direct attached device ID to assign to the phy. * This will either be the RNi for the device or an invalid RNi if there * is no current device assigned to the phy. */ void scic_sds_phy_setup_transport( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 device_id) { u32 tl_control; - writel(device_id, &this_phy->transport_layer_registers->stp_rni); + writel(device_id, &sci_phy->transport_layer_registers->stp_rni); /* * The read should guarantee that the first write gets posted * before the next write */ - tl_control = readl(&this_phy->transport_layer_registers->control); + tl_control = readl(&sci_phy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); - writel(tl_control, &this_phy->transport_layer_registers->control); + writel(tl_control, &sci_phy->transport_layer_registers->control); } /** * - * @this_phy: The phy object to be suspended. + * @sci_phy: The phy object to be suspended. * * This function will perform the register reads/writes to suspend the SCU * hardware protocol engine. none */ static void scic_sds_phy_suspend( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = - readl(&this_phy->link_layer_registers->phy_configuration); + readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); writel(scu_sas_pcfg_value, - &this_phy->link_layer_registers->phy_configuration); + &sci_phy->link_layer_registers->phy_configuration); - scic_sds_phy_setup_transport(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); + scic_sds_phy_setup_transport( + sci_phy, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } /** * - * @this_phy: The phy object to resume. + * @sci_phy: The phy object to resume. * * This function will perform the register reads/writes required to resume the * SCU hardware protocol engine. none */ void scic_sds_phy_resume( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = - readl(&this_phy->link_layer_registers->phy_configuration); + readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); writel(scu_sas_pcfg_value, - &this_phy->link_layer_registers->phy_configuration); + &sci_phy->link_layer_registers->phy_configuration); } /** * This method returns the local sas address assigned to this phy. - * @this_phy: This parameter specifies the phy for which to retrieve the local + * @sci_phy: This parameter specifies the phy for which to retrieve the local * SAS address. * @sas_address: This parameter specifies the location into which to copy the * local SAS address. * */ void scic_sds_phy_get_sas_address( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, struct sci_sas_address *sas_address) { - sas_address->high = readl(&this_phy->link_layer_registers->source_sas_address_high); - sas_address->low = readl(&this_phy->link_layer_registers->source_sas_address_low); + sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high); + sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low); } /** * This method returns the remote end-point (i.e. attached) sas address * assigned to this phy. - * @this_phy: This parameter specifies the phy for which to retrieve the remote + * @sci_phy: This parameter specifies the phy for which to retrieve the remote * end-point SAS address. * @sas_address: This parameter specifies the location into which to copy the * remote end-point SAS address. * */ void scic_sds_phy_get_attached_sas_address( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, struct sci_sas_address *sas_address) { sas_address->high - = this_phy->phy_type.sas.identify_address_frame_buffer.sas_address.high; + = sci_phy->phy_type.sas.identify_address_frame_buffer.sas_address.high; sas_address->low - = this_phy->phy_type.sas.identify_address_frame_buffer.sas_address.low; + = sci_phy->phy_type.sas.identify_address_frame_buffer.sas_address.low; } /** * This method returns the supported protocols assigned to this phy - * @this_phy: + * @sci_phy: * * */ void scic_sds_phy_get_protocols( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, struct sci_sas_identify_address_frame_protocols *protocols) { protocols->u.all = - (u16)(readl(&this_phy-> + (u16)(readl(&sci_phy-> link_layer_registers->transmit_identification) & 0x0000FFFF); } /** * - * @this_phy: The parameter is the phy object for which the attached phy + * @sci_phy: The parameter is the phy object for which the attached phy * protcols are to be returned. * * This method returns the supported protocols for the attached phy. If this @@ -488,15 +493,15 @@ void scic_sds_phy_get_protocols( * value. */ void scic_sds_phy_get_attached_phy_protocols( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, struct sci_sas_identify_address_frame_protocols *protocols) { protocols->u.all = 0; - if (this_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { protocols->u.all = - this_phy->phy_type.sas.identify_address_frame_buffer.protocols.u.all; - } else if (this_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { + sci_phy->phy_type.sas.identify_address_frame_buffer.protocols.u.all; + } else if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { protocols->u.bits.stp_target = 1; } } @@ -533,54 +538,54 @@ enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) /** * This method will attempt to reset the phy. This request is only valid when * the phy is in an ready state - * @this_phy: + * @sci_phy: * * enum sci_status */ enum sci_status scic_sds_phy_reset( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { - return this_phy->state_handlers->reset_handler(this_phy); + return sci_phy->state_handlers->reset_handler(sci_phy); } /** * This method will process the event code received. - * @this_phy: + * @sci_phy: * @event_code: * * enum sci_status */ enum sci_status scic_sds_phy_event_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 event_code) { - return this_phy->state_handlers->event_handler(this_phy, event_code); + return sci_phy->state_handlers->event_handler(sci_phy, event_code); } /** * This method will process the frame index received. - * @this_phy: + * @sci_phy: * @frame_index: * * enum sci_status */ enum sci_status scic_sds_phy_frame_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 frame_index) { - return this_phy->state_handlers->frame_handler(this_phy, frame_index); + return sci_phy->state_handlers->frame_handler(sci_phy, frame_index); } /** * This method will give the phy permission to consume power - * @this_phy: + * @sci_phy: * * enum sci_status */ enum sci_status scic_sds_phy_consume_power_handler( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { - return this_phy->state_handlers->consume_power_handler(this_phy); + return sci_phy->state_handlers->consume_power_handler(sci_phy); } /* @@ -638,7 +643,7 @@ enum sci_status scic_sata_phy_get_properties( /** * - * @this_phy: The phy object that received SAS PHY DETECTED. + * @sci_phy: The phy object that received SAS PHY DETECTED. * * This method continues the link training for the phy as if it were a SAS PHY * instead of a SATA PHY. This is done because the completion queue had a SAS @@ -646,41 +651,41 @@ enum sci_status scic_sata_phy_get_properties( * none */ static void scic_sds_phy_start_sas_link_training( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { u32 phy_control; phy_control = - readl(&this_phy->link_layer_registers->phy_configuration); + readl(&sci_phy->link_layer_registers->phy_configuration); phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); writel(phy_control, - &this_phy->link_layer_registers->phy_configuration); + &sci_phy->link_layer_registers->phy_configuration); sci_base_state_machine_change_state( - &this_phy->starting_substate_machine, + &sci_phy->starting_substate_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN ); - this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; } /** * - * @this_phy: The phy object that received a SATA SPINUP HOLD event + * @sci_phy: The phy object that received a SATA SPINUP HOLD event * * This method continues the link training for the phy as if it were a SATA PHY * instead of a SAS PHY. This is done because the completion queue had a SATA * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none */ static void scic_sds_phy_start_sata_link_training( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { sci_base_state_machine_change_state( - &this_phy->starting_substate_machine, + &sci_phy->starting_substate_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER ); - this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; } /** @@ -748,24 +753,24 @@ static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( * SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: - scic_sds_phy_start_sas_link_training(this_phy); - this_phy->is_in_link_training = true; + scic_sds_phy_start_sas_link_training(sci_phy); + sci_phy->is_in_link_training = true; break; case SCU_EVENT_SATA_SPINUP_HOLD: - scic_sds_phy_start_sata_link_training(this_phy); - this_phy->is_in_link_training = true; + scic_sds_phy_start_sata_link_training(sci_phy); + sci_phy->is_in_link_training = true; break; default: - dev_dbg(sciphy_to_dev(this_phy), + dev_dbg(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -793,7 +798,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( * event notification SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; @@ -808,38 +813,41 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_ case SCU_EVENT_SAS_15: case SCU_EVENT_SAS_15_SSC: scic_sds_phy_complete_link_training( - this_phy, SAS_LINK_RATE_1_5_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF - ); + sci_phy, + SAS_LINK_RATE_1_5_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_30: case SCU_EVENT_SAS_30_SSC: scic_sds_phy_complete_link_training( - this_phy, SAS_LINK_RATE_3_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF - ); + sci_phy, + SAS_LINK_RATE_3_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_60: case SCU_EVENT_SAS_60_SSC: scic_sds_phy_complete_link_training( - this_phy, SAS_LINK_RATE_6_0_GBPS, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF - ); + sci_phy, + SAS_LINK_RATE_6_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* * We were doing SAS PHY link training and received a SATA PHY event * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(this_phy); + scic_sds_phy_start_sata_link_training(sci_phy); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(this_phy); + scic_sds_phy_restart_starting_state(sci_phy); break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -867,7 +875,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_ * unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; @@ -875,25 +883,25 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: /* Backup the state machine */ - scic_sds_phy_start_sas_link_training(this_phy); + scic_sds_phy_start_sas_link_training(sci_phy); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* * We were doing SAS PHY link training and received a SATA PHY event * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(this_phy); + scic_sds_phy_start_sata_link_training(sci_phy); break; case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: case SCU_EVENT_LINK_FAILURE: case SCU_EVENT_HARD_RESET_RECEIVED: /* Start the oob/sn state machine over again */ - scic_sds_phy_restart_starting_state(this_phy); + scic_sds_phy_restart_starting_state(sci_phy); break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -919,7 +927,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler * notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; @@ -927,11 +935,11 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_hand switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(this_phy); + scic_sds_phy_restart_starting_state(sci_phy); break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received unexpected " "event_code %x\n", __func__, @@ -957,7 +965,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_hand * on a link failure event SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; @@ -965,7 +973,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_han switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(this_phy); + scic_sds_phy_restart_starting_state(sci_phy); break; case SCU_EVENT_SATA_SPINUP_HOLD: @@ -976,11 +984,11 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_han /* * There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(this_phy); + scic_sds_phy_start_sas_link_training(sci_phy); break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -1066,7 +1074,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handl * valid event notification SCI_FAILURE on any unexpected event notifation */ static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler( - struct scic_sds_phy *this_phy, + struct scic_sds_phy *sci_phy, u32 event_code) { u32 result = SCI_SUCCESS; @@ -1081,44 +1089,41 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_han case SCU_EVENT_SATA_15: case SCU_EVENT_SATA_15_SSC: scic_sds_phy_complete_link_training( - this_phy, + sci_phy, SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF - ); + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_30: case SCU_EVENT_SATA_30_SSC: scic_sds_phy_complete_link_training( - this_phy, + sci_phy, SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF - ); + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_60: case SCU_EVENT_SATA_60_SSC: scic_sds_phy_complete_link_training( - this_phy, + sci_phy, SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF - ); + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(this_phy); + scic_sds_phy_restart_starting_state(sci_phy); break; case SCU_EVENT_SAS_PHY_DETECTED: /* * There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(this_phy); + scic_sds_phy_start_sas_link_training(sci_phy); break; default: - dev_warn(sciphy_to_dev(this_phy), + dev_warn(sciphy_to_dev(sci_phy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -1583,12 +1588,12 @@ static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_object static void scic_sds_phy_starting_await_ossp_en_substate_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN ); } @@ -1603,12 +1608,12 @@ static void scic_sds_phy_starting_await_ossp_en_substate_enter( static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN ); } @@ -1623,12 +1628,12 @@ static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( static void scic_sds_phy_starting_await_iaf_uf_substate_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF ); } @@ -1644,17 +1649,17 @@ static void scic_sds_phy_starting_await_iaf_uf_substate_enter( static void scic_sds_phy_starting_await_sas_power_substate_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER ); scic_sds_controller_power_control_queue_insert( - scic_sds_phy_get_controller(this_phy), - this_phy + scic_sds_phy_get_controller(sci_phy), + sci_phy ); } @@ -1669,12 +1674,12 @@ static void scic_sds_phy_starting_await_sas_power_substate_enter( static void scic_sds_phy_starting_await_sas_power_substate_exit( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; scic_sds_controller_power_control_queue_remove( - scic_sds_phy_get_controller(this_phy), this_phy + scic_sds_phy_get_controller(sci_phy), sci_phy ); } @@ -1690,17 +1695,17 @@ static void scic_sds_phy_starting_await_sas_power_substate_exit( static void scic_sds_phy_starting_await_sata_power_substate_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; scic_sds_phy_set_starting_substate_handlers( - this_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER ); scic_sds_controller_power_control_queue_insert( - scic_sds_phy_get_controller(this_phy), - this_phy + scic_sds_phy_get_controller(sci_phy), + sci_phy ); } @@ -1715,13 +1720,13 @@ static void scic_sds_phy_starting_await_sata_power_substate_enter( static void scic_sds_phy_starting_await_sata_power_substate_exit( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; scic_sds_controller_power_control_queue_remove( - scic_sds_phy_get_controller(this_phy), - this_phy + scic_sds_phy_get_controller(sci_phy), + sci_phy ); } @@ -2115,33 +2120,32 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ /** * - * @this_phy: This is the struct scic_sds_phy object to stop. + * @sci_phy: This is the struct scic_sds_phy object to stop. * * This method will stop the struct scic_sds_phy object. This does not reset the * protocol engine it just suspends it and places it in a state where it will * not cause the end device to power up. none */ static void scu_link_layer_stop_protocol_engine( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; u32 enable_spinup_value; /* Suspend the protocol engine and place it in a sata spinup hold state */ scu_sas_pcfg_value = - readl(&this_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= ( - SCU_SAS_PCFG_GEN_BIT(OOB_RESET) - | SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) - | SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) - ); + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= + (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | + SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); writel(scu_sas_pcfg_value, - &this_phy->link_layer_registers->phy_configuration); + &sci_phy->link_layer_registers->phy_configuration); /* Disable the notify enable spinup primitives */ - enable_spinup_value = readl(&this_phy->link_layer_registers->notify_enable_spinup_control); + enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); - writel(enable_spinup_value, &this_phy->link_layer_registers->notify_enable_spinup_control); + writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control); } /** @@ -2150,17 +2154,18 @@ static void scu_link_layer_stop_protocol_engine( * This method will start the OOB/SN state machine for this struct scic_sds_phy object. */ static void scu_link_layer_start_oob( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = - readl(&this_phy->link_layer_registers->phy_configuration); + readl(&sci_phy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); scu_sas_pcfg_value &= - ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); + ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); writel(scu_sas_pcfg_value, - &this_phy->link_layer_registers->phy_configuration); + &sci_phy->link_layer_registers->phy_configuration); } /** @@ -2172,7 +2177,7 @@ static void scu_link_layer_start_oob( * hard reset bit set. */ static void scu_link_layer_tx_hard_reset( - struct scic_sds_phy *this_phy) + struct scic_sds_phy *sci_phy) { u32 phy_configuration_value; @@ -2180,17 +2185,18 @@ static void scu_link_layer_tx_hard_reset( * SAS Phys must wait for the HARD_RESET_TX event notification to transition * to the starting state. */ phy_configuration_value = - readl(&this_phy->link_layer_registers->phy_configuration); + readl(&sci_phy->link_layer_registers->phy_configuration); phy_configuration_value |= - (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); + (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | + SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); writel(phy_configuration_value, - &this_phy->link_layer_registers->phy_configuration); + &sci_phy->link_layer_registers->phy_configuration); /* Now take the OOB state machine out of reset */ phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); writel(phy_configuration_value, - &this_phy->link_layer_registers->phy_configuration); + &sci_phy->link_layer_registers->phy_configuration); } /* @@ -2209,11 +2215,11 @@ static void scu_link_layer_tx_hard_reset( static void scic_sds_phy_initial_state_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; - scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_INITIAL); + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL); } /** @@ -2273,28 +2279,28 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) static void scic_sds_phy_starting_state_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; - scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_STARTING); + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING); - scu_link_layer_stop_protocol_engine(this_phy); - scu_link_layer_start_oob(this_phy); + scu_link_layer_stop_protocol_engine(sci_phy); + scu_link_layer_start_oob(sci_phy); /* We don't know what kind of phy we are going to be just yet */ - this_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; - this_phy->bcn_received_while_port_unassigned = false; + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + sci_phy->bcn_received_while_port_unassigned = false; /* Change over to the starting substate machine to continue */ - sci_base_state_machine_start(&this_phy->starting_substate_machine); + sci_base_state_machine_start(&sci_phy->starting_substate_machine); - if (this_phy->state_machine.previous_state_id + if (sci_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY) { scic_sds_controller_link_down( - scic_sds_phy_get_controller(this_phy), - scic_sds_phy_get_port(this_phy), - this_phy + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy ); } } @@ -2312,16 +2318,16 @@ static void scic_sds_phy_starting_state_enter( static void scic_sds_phy_ready_state_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; - scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_READY); + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY); scic_sds_controller_link_up( - scic_sds_phy_get_controller(this_phy), - scic_sds_phy_get_port(this_phy), - this_phy + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy ); } @@ -2336,11 +2342,11 @@ static void scic_sds_phy_ready_state_enter( static void scic_sds_phy_ready_state_exit( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; - scic_sds_phy_suspend(this_phy); + scic_sds_phy_suspend(sci_phy); } /** @@ -2354,26 +2360,28 @@ static void scic_sds_phy_ready_state_exit( static void scic_sds_phy_resetting_state_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; - scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_RESETTING); + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING); /* * The phy is being reset, therefore deactivate it from the port. * In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_deactivate_phy(this_phy->owning_port, this_phy, false); + scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false); - if (this_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - scu_link_layer_tx_hard_reset(this_phy); + if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + scu_link_layer_tx_hard_reset(sci_phy); } else { /* - * The SCU does not need to have a discrete reset state so just go back to - * the starting state. */ - sci_base_state_machine_change_state(&this_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + * The SCU does not need to have a discrete reset state so + * just go back to the starting state. + */ + sci_base_state_machine_change_state( + &sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); } } @@ -2388,11 +2396,11 @@ static void scic_sds_phy_resetting_state_enter( static void scic_sds_phy_final_state_enter( struct sci_base_object *object) { - struct scic_sds_phy *this_phy; + struct scic_sds_phy *sci_phy; - this_phy = (struct scic_sds_phy *)object; + sci_phy = (struct scic_sds_phy *)object; - scic_sds_phy_set_base_state_handlers(this_phy, SCI_BASE_PHY_STATE_FINAL); + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL); /* Nothing to do here */ } diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 40c1297..a8d7e51 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -75,7 +75,7 @@ /** * - * @this_port: This is the port object to which the phy is being assigned. + * @sci_port: This is the port object to which the phy is being assigned. * @phy_index: This is the phy index that is being assigned to the port. * * This method will return a true value if the specified phy can be assigned to @@ -90,30 +90,30 @@ * port */ bool scic_sds_port_is_valid_phy_assignment( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, u32 phy_index) { /* Initialize to invalid value. */ u32 existing_phy_index = SCI_MAX_PHYS; u32 index; - if ((this_port->physical_port_index == 1) && (phy_index != 1)) { + if ((sci_port->physical_port_index == 1) && (phy_index != 1)) { return false; } - if (this_port->physical_port_index == 3 && phy_index != 3) { + if (sci_port->physical_port_index == 3 && phy_index != 3) { return false; } if ( - (this_port->physical_port_index == 2) + (sci_port->physical_port_index == 2) && ((phy_index == 0) || (phy_index == 1)) ) { return false; } for (index = 0; index < SCI_MAX_PHYS; index++) { - if ((this_port->phy_table[index] != NULL) + if ((sci_port->phy_table[index] != NULL) && (index != phy_index)) { existing_phy_index = index; } @@ -124,9 +124,9 @@ bool scic_sds_port_is_valid_phy_assignment( * operating at the same maximum link rate. */ if ( (existing_phy_index < SCI_MAX_PHYS) - && (this_port->owning_controller->user_parameters.sds1.phys[ + && (sci_port->owning_controller->user_parameters.sds1.phys[ phy_index].max_speed_generation != - this_port->owning_controller->user_parameters.sds1.phys[ + sci_port->owning_controller->user_parameters.sds1.phys[ existing_phy_index].max_speed_generation) ) return false; @@ -137,13 +137,13 @@ bool scic_sds_port_is_valid_phy_assignment( /** * This method requests a list (mask) of the phys contained in the supplied SAS * port. - * @this_port: a handle corresponding to the SAS port for which to return the + * @sci_port: a handle corresponding to the SAS port for which to return the * phy mask. * * Return a bit mask indicating which phys are a part of this port. Each bit * corresponds to a phy identifier (e.g. bit 0 = phy id 0). */ -static u32 scic_sds_port_get_phys(struct scic_sds_port *this_port) +static u32 scic_sds_port_get_phys(struct scic_sds_port *sci_port) { u32 index; u32 mask; @@ -151,7 +151,7 @@ static u32 scic_sds_port_get_phys(struct scic_sds_port *this_port) mask = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (this_port->phy_table[index] != NULL) { + if (sci_port->phy_table[index] != NULL) { mask |= (1 << index); } } @@ -161,7 +161,7 @@ static u32 scic_sds_port_get_phys(struct scic_sds_port *this_port) /** * - * @this_port: This is the port object for which to determine if the phy mask + * @sci_port: This is the port object for which to determine if the phy mask * can be supported. * * This method will return a true value if the port's phy mask can be supported @@ -172,25 +172,25 @@ static u32 scic_sds_port_get_phys(struct scic_sds_port *this_port) * port false if this is not a valid phy assignment for the port */ static bool scic_sds_port_is_phy_mask_valid( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, u32 phy_mask) { - if (this_port->physical_port_index == 0) { + if (sci_port->physical_port_index == 0) { if (((phy_mask & 0x0F) == 0x0F) || ((phy_mask & 0x03) == 0x03) || ((phy_mask & 0x01) == 0x01) || (phy_mask == 0)) return true; - } else if (this_port->physical_port_index == 1) { + } else if (sci_port->physical_port_index == 1) { if (((phy_mask & 0x02) == 0x02) || (phy_mask == 0)) return true; - } else if (this_port->physical_port_index == 2) { + } else if (sci_port->physical_port_index == 2) { if (((phy_mask & 0x0C) == 0x0C) || ((phy_mask & 0x04) == 0x04) || (phy_mask == 0)) return true; - } else if (this_port->physical_port_index == 3) { + } else if (sci_port->physical_port_index == 3) { if (((phy_mask & 0x08) == 0x08) || (phy_mask == 0)) return true; @@ -201,7 +201,7 @@ static bool scic_sds_port_is_phy_mask_valid( /** * - * @this_port: This parameter specifies the port from which to return a + * @sci_port: This parameter specifies the port from which to return a * connected phy. * * This method retrieves a currently active (i.e. connected) phy contained in @@ -212,7 +212,7 @@ static bool scic_sds_port_is_phy_mask_valid( * object that is active in the port. */ static struct scic_sds_phy *scic_sds_port_get_a_connected_phy( - struct scic_sds_port *this_port + struct scic_sds_port *sci_port ) { u32 index; struct scic_sds_phy *phy; @@ -221,10 +221,10 @@ static struct scic_sds_phy *scic_sds_port_get_a_connected_phy( /* * Ensure that the phy is both part of the port and currently * connected to the remote end-point. */ - phy = this_port->phy_table[index]; + phy = sci_port->phy_table[index]; if ( (phy != NULL) - && scic_sds_port_active_phy(this_port, phy) + && scic_sds_port_active_phy(sci_port, phy) ) { return phy; } @@ -304,50 +304,50 @@ static enum sci_status scic_sds_port_clear_phy( /** * scic_sds_port_add_phy() - - * @this_port: This parameter specifies the port in which the phy will be added. - * @the_phy: This parameter is the phy which is to be added to the port. + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. * * This method will add a PHY to the selected port. This method returns an * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other status * is failre to add the phy to the port. */ enum sci_status scic_sds_port_add_phy( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - return this_port->state_handlers->add_phy_handler( - this_port, the_phy); + return sci_port->state_handlers->add_phy_handler( + sci_port, sci_phy); } /** * scic_sds_port_remove_phy() - - * @this_port: This parameter specifies the port in which the phy will be added. - * @the_phy: This parameter is the phy which is to be added to the port. + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. * * This method will remove the PHY from the selected PORT. This method returns * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any other * status is failre to add the phy to the port. */ enum sci_status scic_sds_port_remove_phy( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - return this_port->state_handlers->remove_phy_handler( - this_port, the_phy); + return sci_port->state_handlers->remove_phy_handler( + sci_port, sci_phy); } /** * This method requests the SAS address for the supplied SAS port from the SCI * implementation. - * @this_port: a handle corresponding to the SAS port for which to return the + * @sci_port: a handle corresponding to the SAS port for which to return the * SAS address. * @sas_address: This parameter specifies a pointer to a SAS address structure * into which the core will copy the SAS address for the port. * */ void scic_sds_port_get_sas_address( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, struct sci_sas_address *sas_address) { u32 index; @@ -356,15 +356,15 @@ void scic_sds_port_get_sas_address( sas_address->low = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (this_port->phy_table[index] != NULL) { - scic_sds_phy_get_sas_address(this_port->phy_table[index], sas_address); + if (sci_port->phy_table[index] != NULL) { + scic_sds_phy_get_sas_address(sci_port->phy_table[index], sas_address); } } } /** * This method will indicate which protocols are supported by this port. - * @this_port: a handle corresponding to the SAS port for which to return the + * @sci_port: a handle corresponding to the SAS port for which to return the * supported protocols. * @protocols: This parameter specifies a pointer to an IAF protocol field * structure into which the core will copy the protocol values for the port. @@ -373,7 +373,7 @@ void scic_sds_port_get_sas_address( * */ static void scic_sds_port_get_protocols( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, struct sci_sas_identify_address_frame_protocols *protocols) { u8 index; @@ -381,8 +381,8 @@ static void scic_sds_port_get_protocols( protocols->u.all = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (this_port->phy_table[index] != NULL) { - scic_sds_phy_get_protocols(this_port->phy_table[index], protocols); + if (sci_port->phy_table[index] != NULL) { + scic_sds_phy_get_protocols(sci_port->phy_table[index], protocols); } } } @@ -390,7 +390,7 @@ static void scic_sds_port_get_protocols( /** * This method requests the SAS address for the device directly attached to * this SAS port. - * @this_port: a handle corresponding to the SAS port for which to return the + * @sci_port: a handle corresponding to the SAS port for which to return the * SAS address. * @sas_address: This parameter specifies a pointer to a SAS address structure * into which the core will copy the SAS address for the device directly @@ -398,7 +398,7 @@ static void scic_sds_port_get_protocols( * */ void scic_sds_port_get_attached_sas_address( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, struct sci_sas_address *sas_address) { struct sci_sas_identify_address_frame_protocols protocols; @@ -407,7 +407,7 @@ void scic_sds_port_get_attached_sas_address( /* * Ensure that the phy is both part of the port and currently * connected to the remote end-point. */ - phy = scic_sds_port_get_a_connected_phy(this_port); + phy = scic_sds_port_get_a_connected_phy(sci_port); if (phy != NULL) { scic_sds_phy_get_attached_phy_protocols(phy, &protocols); @@ -426,7 +426,7 @@ void scic_sds_port_get_attached_sas_address( /** * This method will indicate which protocols are supported by this remote * device. - * @this_port: a handle corresponding to the SAS port for which to return the + * @sci_port: a handle corresponding to the SAS port for which to return the * supported protocols. * @protocols: This parameter specifies a pointer to an IAF protocol field * structure into which the core will copy the protocol values for the port. @@ -435,7 +435,7 @@ void scic_sds_port_get_attached_sas_address( * */ void scic_sds_port_get_attached_protocols( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, struct sci_sas_identify_address_frame_protocols *protocols) { struct scic_sds_phy *phy; @@ -443,7 +443,7 @@ void scic_sds_port_get_attached_protocols( /* * Ensure that the phy is both part of the port and currently * connected to the remote end-point. */ - phy = scic_sds_port_get_a_connected_phy(this_port); + phy = scic_sds_port_get_a_connected_phy(sci_port); if (phy != NULL) scic_sds_phy_get_attached_phy_protocols(phy, protocols); else @@ -548,7 +548,7 @@ static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port * This method performs initialization of the supplied port. Initialization * includes: - state machine initialization - member variable initialization * - configuring the phy_mask - * @this_port: + * @sci_port: * @transport_layer_registers: * @port_task_scheduler_registers: * @port_configuration_regsiter: @@ -557,14 +557,14 @@ static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port * if the phy being added to the port */ enum sci_status scic_sds_port_initialize( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, void __iomem *port_task_scheduler_registers, void __iomem *port_configuration_regsiter, void __iomem *viit_registers) { - this_port->port_task_scheduler_registers = port_task_scheduler_registers; - this_port->port_pe_configuration_register = port_configuration_regsiter; - this_port->viit_registers = viit_registers; + sci_port->port_task_scheduler_registers = port_task_scheduler_registers; + sci_port->port_pe_configuration_register = port_configuration_regsiter; + sci_port->viit_registers = viit_registers; return SCI_SUCCESS; } @@ -622,27 +622,27 @@ enum sci_status scic_port_hard_reset( /** * This method assigns the direct attached device ID for this port. * - * @param[in] this_port The port for which the direct attached device id is to + * @param[in] sci_port The port for which the direct attached device id is to * be assigned. * @param[in] device_id The direct attached device ID to assign to the port. * This will be the RNi for the device */ void scic_sds_port_setup_transports( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, u32 device_id) { u8 index; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (this_port->active_phy_mask & (1 << index)) - scic_sds_phy_setup_transport(this_port->phy_table[index], device_id); + if (sci_port->active_phy_mask & (1 << index)) + scic_sds_phy_setup_transport(sci_port->phy_table[index], device_id); } } /** * - * @this_port: This is the port on which the phy should be enabled. - * @the_phy: This is the specific phy which to enable. + * @sci_port: This is the port on which the phy should be enabled. + * @sci_phy: This is the specific phy which to enable. * @do_notify_user: This parameter specifies whether to inform the user (via * scic_cb_port_link_up()) as to the fact that a new phy as become ready. * @@ -696,8 +696,8 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, /** * - * @this_port: This is the port on which the phy should be disabled. - * @the_phy: This is the specific phy which to disabled. + * @sci_port: This is the port on which the phy should be disabled. + * @sci_phy: This is the specific phy which to disabled. * * This function will disable the phy and report that the phy is not valid for * this port object. None @@ -766,18 +766,18 @@ static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port * This method returns false if the port only has a single phy object assigned. * If there are no phys or more than one phy then the method will return * true. - * @this_port: The port for which the wide port condition is to be checked. + * @sci_port: The port for which the wide port condition is to be checked. * * bool true Is returned if this is a wide ported port. false Is returned if * this is a narrow port. */ -static bool scic_sds_port_is_wide(struct scic_sds_port *this_port) +static bool scic_sds_port_is_wide(struct scic_sds_port *sci_port) { u32 index; u32 phy_count = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (this_port->phy_table[index] != NULL) { + if (sci_port->phy_table[index] != NULL) { phy_count++; } } @@ -790,8 +790,8 @@ static bool scic_sds_port_is_wide(struct scic_sds_port *this_port) * port wants the PHY to continue on to the link up state then the port * layer must return true. If the port object returns false the phy object * must halt its attempt to go link up. - * @this_port: The port associated with the phy object. - * @the_phy: The phy object that is trying to go link up. + * @sci_port: The port associated with the phy object. + * @sci_phy: The phy object that is trying to go link up. * * true if the phy object can continue to the link up condition. true Is * returned if this phy can continue to the ready state. false Is returned if @@ -800,19 +800,19 @@ static bool scic_sds_port_is_wide(struct scic_sds_port *this_port) * devices this could become an invalid port configuration. */ bool scic_sds_port_link_detected( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { struct sci_sas_identify_address_frame_protocols protocols; - scic_sds_phy_get_attached_phy_protocols(the_phy, &protocols); + scic_sds_phy_get_attached_phy_protocols(sci_phy, &protocols); if ( - (this_port->logical_port_index != SCIC_SDS_DUMMY_PORT) + (sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) && (protocols.u.bits.stp_target) - && scic_sds_port_is_wide(this_port) + && scic_sds_port_is_wide(sci_port) ) { - scic_sds_port_invalid_link_up(this_port, the_phy); + scic_sds_port_invalid_link_up(sci_port, sci_phy); return false; } @@ -823,65 +823,65 @@ bool scic_sds_port_link_detected( /** * This method is the entry point for the phy to inform the port that it is now * in a ready state - * @this_port: + * @sci_port: * * */ void scic_sds_port_link_up( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - the_phy->is_in_link_training = false; + sci_phy->is_in_link_training = false; - this_port->state_handlers->link_up_handler(this_port, the_phy); + sci_port->state_handlers->link_up_handler(sci_port, sci_phy); } /** * This method is the entry point for the phy to inform the port that it is no * longer in a ready state - * @this_port: + * @sci_port: * * */ void scic_sds_port_link_down( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - this_port->state_handlers->link_down_handler(this_port, the_phy); + sci_port->state_handlers->link_down_handler(sci_port, sci_phy); } /** * This method is called to start an IO request on this port. - * @this_port: - * @the_device: - * @the_io_request: + * @sci_port: + * @sci_dev: + * @sci_req: * * enum sci_status */ enum sci_status scic_sds_port_start_io( - struct scic_sds_port *this_port, - struct scic_sds_remote_device *the_device, - struct scic_sds_request *the_io_request) + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) { - return this_port->state_handlers->start_io_handler( - this_port, the_device, the_io_request); + return sci_port->state_handlers->start_io_handler( + sci_port, sci_dev, sci_req); } /** * This method is called to complete an IO request to the port. - * @this_port: - * @the_device: - * @the_io_request: + * @sci_port: + * @sci_dev: + * @sci_req: * * enum sci_status */ enum sci_status scic_sds_port_complete_io( - struct scic_sds_port *this_port, - struct scic_sds_remote_device *the_device, - struct scic_sds_request *the_io_request) + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) { - return this_port->state_handlers->complete_io_handler( - this_port, the_device, the_io_request); + return sci_port->state_handlers->complete_io_handler( + sci_port, sci_dev, sci_req); } /** @@ -945,40 +945,40 @@ static void scic_sds_port_timeout_handler(void *port) * * */ -static void scic_sds_port_update_viit_entry(struct scic_sds_port *this_port) +static void scic_sds_port_update_viit_entry(struct scic_sds_port *sci_port) { struct sci_sas_address sas_address; - scic_sds_port_get_sas_address(this_port, &sas_address); + scic_sds_port_get_sas_address(sci_port, &sas_address); writel(sas_address.high, - &this_port->viit_registers->initiator_sas_address_hi); + &sci_port->viit_registers->initiator_sas_address_hi); writel(sas_address.low, - &this_port->viit_registers->initiator_sas_address_lo); + &sci_port->viit_registers->initiator_sas_address_lo); /* This value get cleared just in case its not already cleared */ - writel(0, &this_port->viit_registers->reserved); + writel(0, &sci_port->viit_registers->reserved); /* We are required to update the status register last */ writel(SCU_VIIT_ENTRY_ID_VIIT | SCU_VIIT_IPPT_INITIATOR | - ((1 << this_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | + ((1 << sci_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | SCU_VIIT_STATUS_ALL_VALID, - &this_port->viit_registers->status); + &sci_port->viit_registers->status); } /** * This method returns the maximum allowed speed for data transfers on this * port. This maximum allowed speed evaluates to the maximum speed of the * slowest phy in the port. - * @this_port: This parameter specifies the port for which to retrieve the + * @sci_port: This parameter specifies the port for which to retrieve the * maximum allowed speed. * * This method returns the maximum negotiated speed of the slowest phy in the * port. */ enum sas_linkrate scic_sds_port_get_max_allowed_speed( - struct scic_sds_port *this_port) + struct scic_sds_port *sci_port) { u16 index; enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS; @@ -988,10 +988,10 @@ enum sas_linkrate scic_sds_port_get_max_allowed_speed( * Loop through all of the phys in this port and find the phy with the * lowest maximum link rate. */ for (index = 0; index < SCI_MAX_PHYS; index++) { - phy = this_port->phy_table[index]; + phy = sci_port->phy_table[index]; if ( (phy != NULL) - && (scic_sds_port_active_phy(this_port, phy) == true) + && (scic_sds_port_active_phy(sci_port, phy) == true) && (phy->max_negotiated_speed < max_allowed_speed) ) max_allowed_speed = phy->max_negotiated_speed; @@ -1003,8 +1003,8 @@ enum sas_linkrate scic_sds_port_get_max_allowed_speed( /** * This method passes the event to core user. - * @this_port: The port that a BCN happens. - * @this_phy: The phy that receives BCN. + * @sci_port: The port that a BCN happens. + * @sci_phy: The phy that receives BCN. * */ void scic_sds_port_broadcast_change_received( @@ -1022,7 +1022,7 @@ void scic_sds_port_broadcast_change_received( /** * This API methhod enables the broadcast change notification from underneath * hardware. - * @this_port: The port that a BCN had been disabled from. + * @sci_port: The port that a BCN had been disabled from. * */ void scic_port_enable_broadcast_change_notification( @@ -1134,25 +1134,25 @@ static enum sci_status scic_sds_port_ready_substate_remove_phy_handler( /** * - * @this_port: This is the struct scic_sds_port object that which has a phy that has + * @sci_port: This is the struct scic_sds_port object that which has a phy that has * gone link up. - * @the_phy: This is the struct scic_sds_phy object that has gone link up. + * @sci_phy: This is the struct scic_sds_phy object that has gone link up. * * This method is the ready waiting substate link up handler for the * struct scic_sds_port object. This methos will report the link up condition for * this port and will transition to the ready operational substate. none */ static void scic_sds_port_ready_waiting_substate_link_up_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { /* * Since this is the first phy going link up for the port we can just enable * it and continue. */ - scic_sds_port_activate_phy(this_port, the_phy, true); + scic_sds_port_activate_phy(sci_port, sci_phy, true); sci_base_state_machine_change_state( - &this_port->ready_substate_machine, + &sci_port->ready_substate_machine, SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL ); } @@ -1224,19 +1224,19 @@ sci_status scic_sds_port_ready_operational_substate_reset_handler( /** * scic_sds_port_ready_operational_substate_link_up_handler() - - * @this_port: This is the struct scic_sds_port object that which has a phy that has + * @sci_port: This is the struct scic_sds_port object that which has a phy that has * gone link up. - * @the_phy: This is the struct scic_sds_phy object that has gone link up. + * @sci_phy: This is the struct scic_sds_phy object that has gone link up. * * This method is the ready operational substate link up handler for the * struct scic_sds_port object. This function notifies the SCI User that the phy has * gone link up. none */ static void scic_sds_port_ready_operational_substate_link_up_handler( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy) + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - scic_sds_port_general_link_up_handler(this_port, the_phy, true); + scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); } /** @@ -1534,7 +1534,7 @@ scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = /** * - * @this_port: This is the struct scic_sds_port object to suspend. + * @sci_port: This is the struct scic_sds_port object to suspend. * * This method will susped the port task scheduler for this port object. none */ @@ -1602,7 +1602,7 @@ static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) /** * - * @this_port: This is the struct scic_sds_port object to resume. + * @sci_port: This is the struct scic_sds_port object to resume. * * This method will resume the port task scheduler for this port object. none */ @@ -1633,20 +1633,20 @@ scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) static void scic_sds_port_ready_substate_waiting_enter( struct sci_base_object *object) { - struct scic_sds_port *this_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; scic_sds_port_set_ready_state_handlers( - this_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING + sci_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING ); - scic_sds_port_suspend_port_task_scheduler(this_port); + scic_sds_port_suspend_port_task_scheduler(sci_port); - this_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; + sci_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; - if (this_port->active_phy_mask != 0) { + if (sci_port->active_phy_mask != 0) { /* At least one of the phys on the port is ready */ sci_base_state_machine_change_state( - &this_port->ready_substate_machine, + &sci_port->ready_substate_machine, SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL ); } @@ -1766,9 +1766,9 @@ static void scic_sds_port_ready_substate_configuring_enter( static void scic_sds_port_ready_substate_configuring_exit( struct sci_base_object *object) { - struct scic_sds_port *this_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = (struct scic_sds_port *)object; - scic_sds_port_suspend_port_task_scheduler(this_port); + scic_sds_port_suspend_port_task_scheduler(sci_port); } /* --------------------------------------------------------------------------- */ @@ -2160,7 +2160,7 @@ scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = /** * - * @this_port: This is the port object which to suspend. + * @sci_port: This is the port object which to suspend. * * This method will enable the SCU Port Task Scheduler for this port object but * will leave the port task scheduler in a suspended state. none @@ -2177,7 +2177,7 @@ scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port) /** * - * @this_port: This is the port object which to resume. + * @sci_port: This is the port object which to resume. * * This method will disable the SCU port task scheduler for this port object. * none @@ -2263,23 +2263,23 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci static void scic_sds_port_stopped_state_enter( struct sci_base_object *object) { - struct scic_sds_port *this_port; + struct scic_sds_port *sci_port; - this_port = (struct scic_sds_port *)object; + sci_port = (struct scic_sds_port *)object; scic_sds_port_set_base_state_handlers( - this_port, SCI_BASE_PORT_STATE_STOPPED + sci_port, SCI_BASE_PORT_STATE_STOPPED ); if ( SCI_BASE_PORT_STATE_STOPPING - == this_port->state_machine.previous_state_id + == sci_port->state_machine.previous_state_id ) { /* * If we enter this state becasuse of a request to stop * the port then we want to disable the hardwares port * task scheduler. */ - scic_sds_port_disable_port_task_scheduler(this_port); + scic_sds_port_disable_port_task_scheduler(sci_port); } } @@ -2294,12 +2294,12 @@ static void scic_sds_port_stopped_state_enter( static void scic_sds_port_stopped_state_exit( struct sci_base_object *object) { - struct scic_sds_port *this_port; + struct scic_sds_port *sci_port; - this_port = (struct scic_sds_port *)object; + sci_port = (struct scic_sds_port *)object; /* Enable and suspend the port task scheduler */ - scic_sds_port_enable_port_task_scheduler(this_port); + scic_sds_port_enable_port_task_scheduler(sci_port); } /** @@ -2360,12 +2360,12 @@ static void scic_sds_port_ready_state_exit(struct sci_base_object *object) static void scic_sds_port_resetting_state_enter( struct sci_base_object *object) { - struct scic_sds_port *this_port; + struct scic_sds_port *sci_port; - this_port = (struct scic_sds_port *)object; + sci_port = (struct scic_sds_port *)object; scic_sds_port_set_base_state_handlers( - this_port, SCI_BASE_PORT_STATE_RESETTING + sci_port, SCI_BASE_PORT_STATE_RESETTING ); } @@ -2397,12 +2397,12 @@ static inline void scic_sds_port_resetting_state_exit( static void scic_sds_port_stopping_state_enter( struct sci_base_object *object) { - struct scic_sds_port *this_port; + struct scic_sds_port *sci_port; - this_port = (struct scic_sds_port *)object; + sci_port = (struct scic_sds_port *)object; scic_sds_port_set_base_state_handlers( - this_port, SCI_BASE_PORT_STATE_STOPPING + sci_port, SCI_BASE_PORT_STATE_STOPPING ); } diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index c7741e8..964e388 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -378,77 +378,77 @@ static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *s (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) void scic_sds_port_construct( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, u8 port_index, - struct scic_sds_controller *owning_controller); + struct scic_sds_controller *scic); enum sci_status scic_sds_port_initialize( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, void __iomem *port_task_scheduler_registers, void __iomem *port_configuration_regsiter, void __iomem *viit_registers); enum sci_status scic_sds_port_add_phy( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy); + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); enum sci_status scic_sds_port_remove_phy( - struct scic_sds_port *this_port, - struct scic_sds_phy *the_phy); + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); void scic_sds_port_setup_transports( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, u32 device_id); void scic_sds_port_deactivate_phy( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, bool do_notify_user); bool scic_sds_port_link_detected( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy); + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); void scic_sds_port_link_up( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy); + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); void scic_sds_port_link_down( - struct scic_sds_port *this_port, - struct scic_sds_phy *phy); + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); enum sci_status scic_sds_port_start_io( - struct scic_sds_port *this_port, - struct scic_sds_remote_device *the_device, - struct scic_sds_request *the_io_request); + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req); enum sci_status scic_sds_port_complete_io( - struct scic_sds_port *this_port, - struct scic_sds_remote_device *the_device, - struct scic_sds_request *the_io_request); + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req); enum sas_linkrate scic_sds_port_get_max_allowed_speed( - struct scic_sds_port *this_port); + struct scic_sds_port *sci_port); void scic_sds_port_broadcast_change_received( - struct scic_sds_port *this_port, - struct scic_sds_phy *this_phy); + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); bool scic_sds_port_is_valid_phy_assignment( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, u32 phy_index); void scic_sds_port_get_sas_address( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, struct sci_sas_address *sas_address); void scic_sds_port_get_attached_sas_address( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, struct sci_sas_address *sas_address); void scic_sds_port_get_attached_protocols( - struct scic_sds_port *this_port, + struct scic_sds_port *sci_port, struct sci_sas_identify_address_frame_protocols *protocols); #endif /* _SCIC_SDS_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 0976fae..fa7828d 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -149,17 +149,17 @@ enum sci_status scic_remote_device_da_construct( static void scic_sds_remote_device_get_info_from_smp_discover_response( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, struct smp_response_discover *discover_response) { - /* decode discover_response to set sas_address to this_device. */ - this_device->device_address.high = + /* decode discover_response to set sas_address to sci_dev. */ + sci_dev->device_address.high = discover_response->attached_sas_address.high; - this_device->device_address.low = + sci_dev->device_address.low = discover_response->attached_sas_address.low; - this_device->target_protocols.u.all = discover_response->protocols.u.all; + sci_dev->target_protocols.u.all = discover_response->protocols.u.all; } @@ -168,15 +168,15 @@ enum sci_status scic_remote_device_ea_construct( struct smp_response_discover *discover_response) { enum sci_status status; - struct scic_sds_controller *the_controller; + struct scic_sds_controller *scic; - the_controller = scic_sds_port_get_controller(sci_dev->owning_port); + scic = scic_sds_port_get_controller(sci_dev->owning_port); scic_sds_remote_device_get_info_from_smp_discover_response( sci_dev, discover_response); status = scic_sds_controller_allocate_remote_node_context( - the_controller, sci_dev, &sci_dev->rnc->remote_node_index); + scic, sci_dev, &sci_dev->rnc->remote_node_index); if (status == SCI_SUCCESS) { if (sci_dev->target_protocols.u.bits.attached_ssp_target) { @@ -294,32 +294,32 @@ bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) /** * - * @this_device: The remote device for which the suspend is being requested. + * @sci_dev: The remote device for which the suspend is being requested. * * This method invokes the remote device suspend state handler. enum sci_status */ enum sci_status scic_sds_remote_device_suspend( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 suspend_type) { - return this_device->state_handlers->suspend_handler(this_device, suspend_type); + return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type); } /** * - * @this_device: The remote device for which the resume is being requested. + * @sci_dev: The remote device for which the resume is being requested. * * This method invokes the remote device resume state handler. enum sci_status */ enum sci_status scic_sds_remote_device_resume( - struct scic_sds_remote_device *this_device) + struct scic_sds_remote_device *sci_dev) { - return this_device->state_handlers->resume_handler(this_device); + return sci_dev->state_handlers->resume_handler(sci_dev); } /** * - * @this_device: The remote device for which the event handling is being + * @sci_dev: The remote device for which the event handling is being * requested. * @frame_index: This is the frame index that is being processed. * @@ -327,31 +327,31 @@ enum sci_status scic_sds_remote_device_resume( * enum sci_status */ enum sci_status scic_sds_remote_device_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index) { - return this_device->state_handlers->frame_handler(this_device, frame_index); + return sci_dev->state_handlers->frame_handler(sci_dev, frame_index); } /** * - * @this_device: The remote device for which the event handling is being + * @sci_dev: The remote device for which the event handling is being * requested. * @event_code: This is the event code that is to be processed. * * This method invokes the remote device event handler. enum sci_status */ enum sci_status scic_sds_remote_device_event_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code) { - return this_device->state_handlers->event_handler(this_device, event_code); + return sci_dev->state_handlers->event_handler(sci_dev, event_code); } /** * * @controller: The controller that is starting the io request. - * @this_device: The remote device for which the start io handling is being + * @sci_dev: The remote device for which the start io handling is being * requested. * @io_request: The io request that is being started. * @@ -359,17 +359,17 @@ enum sci_status scic_sds_remote_device_event_handler( */ enum sci_status scic_sds_remote_device_start_io( struct scic_sds_controller *controller, - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request) { - return this_device->state_handlers->start_io_handler( - this_device, io_request); + return sci_dev->state_handlers->start_io_handler( + sci_dev, io_request); } /** * * @controller: The controller that is completing the io request. - * @this_device: The remote device for which the complete io handling is being + * @sci_dev: The remote device for which the complete io handling is being * requested. * @io_request: The io request that is being completed. * @@ -377,17 +377,17 @@ enum sci_status scic_sds_remote_device_start_io( */ enum sci_status scic_sds_remote_device_complete_io( struct scic_sds_controller *controller, - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request) { - return this_device->state_handlers->complete_io_handler( - this_device, io_request); + return sci_dev->state_handlers->complete_io_handler( + sci_dev, io_request); } /** * * @controller: The controller that is starting the task request. - * @this_device: The remote device for which the start task handling is being + * @sci_dev: The remote device for which the start task handling is being * requested. * @io_request: The task request that is being started. * @@ -395,17 +395,17 @@ enum sci_status scic_sds_remote_device_complete_io( */ enum sci_status scic_sds_remote_device_start_task( struct scic_sds_controller *controller, - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request) { - return this_device->state_handlers->start_task_handler( - this_device, io_request); + return sci_dev->state_handlers->start_task_handler( + sci_dev, io_request); } /** * * @controller: The controller that is completing the task request. - * @this_device: The remote device for which the complete task handling is + * @sci_dev: The remote device for which the complete task handling is * being requested. * @io_request: The task request that is being completed. * @@ -414,22 +414,22 @@ enum sci_status scic_sds_remote_device_start_task( /** * - * @this_device: + * @sci_dev: * @request: * * This method takes the request and bulids an appropriate SCU context for the * request and then requests the controller to post the request. none */ void scic_sds_remote_device_post_request( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 request) { u32 context; - context = scic_sds_remote_device_build_command_context(this_device, request); + context = scic_sds_remote_device_build_command_context(sci_dev, request); scic_sds_controller_post_request( - scic_sds_remote_device_get_controller(this_device), + scic_sds_remote_device_get_controller(sci_dev), context ); } @@ -437,22 +437,22 @@ void scic_sds_remote_device_post_request( #if !defined(DISABLE_ATAPI) /** * - * @this_device: The device to be checked. + * @sci_dev: The device to be checked. * * This method check the signature fis of a stp device to decide whether a * device is atapi or not. true if a device is atapi device. False if a device * is not atapi. */ bool scic_sds_remote_device_is_atapi( - struct scic_sds_remote_device *this_device) + struct scic_sds_remote_device *sci_dev) { - if (!this_device->target_protocols.u.bits.attached_stp_target) + if (!sci_dev->target_protocols.u.bits.attached_stp_target) return false; - else if (this_device->is_direct_attached) { + else if (sci_dev->is_direct_attached) { struct scic_sds_phy *phy; struct scic_sata_phy_properties properties; struct sata_fis_reg_d2h *signature_fis; - phy = scic_sds_port_get_a_connected_phy(this_device->owning_port); + phy = scic_sds_port_get_a_connected_phy(sci_dev->owning_port); scic_sata_phy_get_properties(phy, &properties); /* decode the signature fis. */ @@ -506,16 +506,16 @@ static void scic_sds_cb_remote_device_rnc_destruct_complete( static void scic_sds_remote_device_resume_complete_handler( void *user_parameter) { - struct scic_sds_remote_device *this_device; + struct scic_sds_remote_device *sci_dev; - this_device = (struct scic_sds_remote_device *)user_parameter; + sci_dev = (struct scic_sds_remote_device *)user_parameter; if ( - sci_base_state_machine_get_state(&this_device->state_machine) + sci_base_state_machine_get_state(&sci_dev->state_machine) != SCI_BASE_REMOTE_DEVICE_STATE_READY ) { sci_base_state_machine_change_state( - &this_device->state_machine, + &sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_READY ); } @@ -532,16 +532,16 @@ static void scic_sds_remote_device_resume_complete_handler( * requests and task requests of all types. none */ void scic_sds_remote_device_start_request( - struct scic_sds_remote_device *this_device, - struct scic_sds_request *the_request, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req, enum sci_status status) { /* We still have a fault in starting the io complete it on the port */ if (status == SCI_SUCCESS) - scic_sds_remote_device_increment_request_count(this_device); + scic_sds_remote_device_increment_request_count(sci_dev); else{ - this_device->owning_port->state_handlers->complete_io_handler( - this_device->owning_port, this_device, the_request + sci_dev->owning_port->state_handlers->complete_io_handler( + sci_dev->owning_port, sci_dev, sci_req ); } } @@ -576,7 +576,7 @@ void scic_sds_remote_device_continue_request(void *dev) /** * This method will terminate all of the IO requests in the controllers IO * request table that were targeted for this device. - * @this_device: This parameter specifies the remote device for which to + * @sci_dev: This parameter specifies the remote device for which to * attempt to terminate all requests. * * This method returns an indication as to whether all requests were @@ -584,24 +584,24 @@ void scic_sds_remote_device_continue_request(void *dev) * this method will return the failure. */ static enum sci_status scic_sds_remote_device_terminate_requests( - struct scic_sds_remote_device *this_device) + struct scic_sds_remote_device *sci_dev) { enum sci_status status = SCI_SUCCESS; enum sci_status terminate_status = SCI_SUCCESS; - struct scic_sds_request *the_request; + struct scic_sds_request *sci_req; u32 index; - u32 request_count = this_device->started_request_count; + u32 request_count = sci_dev->started_request_count; for (index = 0; (index < SCI_MAX_IO_REQUESTS) && (request_count > 0); index++) { - the_request = this_device->owning_port->owning_controller->io_request_table[index]; + sci_req = sci_dev->owning_port->owning_controller->io_request_table[index]; - if ((the_request != NULL) && (the_request->target_device == this_device)) { + if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) { terminate_status = scic_controller_terminate_request( - this_device->owning_port->owning_controller, - this_device, - the_request + sci_dev->owning_port->owning_controller, + sci_dev, + sci_req ); if (terminate_status != SCI_SUCCESS) @@ -684,7 +684,7 @@ enum sci_status scic_sds_remote_device_default_resume_handler( * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE */ static enum sci_status scic_sds_remote_device_core_event_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code, bool is_ready_state) { @@ -694,7 +694,7 @@ static enum sci_status scic_sds_remote_device_core_event_handler( case SCU_EVENT_TYPE_RNC_OPS_MISC: case SCU_EVENT_TYPE_RNC_SUSPEND_TX: case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - status = scic_sds_remote_node_context_event_handler(this_device->rnc, event_code); + status = scic_sds_remote_node_context_event_handler(sci_dev->rnc, event_code); break; case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: @@ -702,13 +702,13 @@ static enum sci_status scic_sds_remote_device_core_event_handler( status = SCI_SUCCESS; /* Suspend the associated RNC */ - scic_sds_remote_node_context_suspend(this_device->rnc, + scic_sds_remote_node_context_suspend(sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); - dev_dbg(scirdev_to_dev(this_device), + dev_dbg(scirdev_to_dev(sci_dev), "%s: device: %p event code: %x: %s\n", - __func__, this_device, event_code, + __func__, sci_dev, event_code, (is_ready_state) ? "I_T_Nexus_Timeout event" : "I_T_Nexus_Timeout event in wrong state"); @@ -718,9 +718,9 @@ static enum sci_status scic_sds_remote_device_core_event_handler( /* Else, fall through and treat as unhandled... */ default: - dev_dbg(scirdev_to_dev(this_device), + dev_dbg(scirdev_to_dev(sci_dev), "%s: device: %p event code: %x: %s\n", - __func__, this_device, event_code, + __func__, sci_dev, event_code, (is_ready_state) ? "unexpected event" : "unexpected event in wrong state"); @@ -742,10 +742,10 @@ static enum sci_status scic_sds_remote_device_core_event_handler( * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE */ static enum sci_status scic_sds_remote_device_default_event_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code) { - return scic_sds_remote_device_core_event_handler(this_device, + return scic_sds_remote_device_core_event_handler(sci_dev, event_code, false); } @@ -762,20 +762,20 @@ static enum sci_status scic_sds_remote_device_default_event_handler( * SCI_FAILURE_INVALID_STATE */ enum sci_status scic_sds_remote_device_default_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index) { - dev_warn(scirdev_to_dev(this_device), + dev_warn(scirdev_to_dev(sci_dev), "%s: SCIC Remote Device requested to handle frame %x " "while in wrong state %d\n", __func__, frame_index, sci_base_state_machine_get_state( - &this_device->state_machine)); + &sci_dev->state_machine)); /* Return the frame back to the controller */ scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(this_device), frame_index + scic_sds_remote_device_get_controller(sci_dev), frame_index ); return SCI_FAILURE_INVALID_STATE; @@ -815,7 +815,7 @@ enum sci_status scic_sds_remote_device_default_continue_request_handler( * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE */ enum sci_status scic_sds_remote_device_general_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index) { enum sci_status result; @@ -823,22 +823,22 @@ enum sci_status scic_sds_remote_device_general_frame_handler( struct scic_sds_request *io_request; result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_remote_device_get_controller(this_device)->uf_control), + &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), frame_index, (void **)&frame_header ); if (SCI_SUCCESS == result) { io_request = scic_sds_controller_get_io_request_from_tag( - scic_sds_remote_device_get_controller(this_device), frame_header->tag); + scic_sds_remote_device_get_controller(sci_dev), frame_header->tag); if ((io_request == NULL) - || (io_request->target_device != this_device)) { + || (io_request->target_device != sci_dev)) { /* * We could not map this tag to a valid IO request * Just toss the frame and continue */ scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(this_device), frame_index + scic_sds_remote_device_get_controller(sci_dev), frame_index ); } else { /* The IO request is now in charge of releasing the frame */ @@ -852,17 +852,17 @@ enum sci_status scic_sds_remote_device_general_frame_handler( /** * - * @[in]: this_device This is the device object that is receiving the event. + * @[in]: sci_dev This is the device object that is receiving the event. * @[in]: event_code The event code to process. * * This is a common method for handling events reported to the remote device * from the controller object. enum sci_status */ enum sci_status scic_sds_remote_device_general_event_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code) { - return scic_sds_remote_device_core_event_handler(this_device, + return scic_sds_remote_device_core_event_handler(sci_dev, event_code, true); } @@ -1093,7 +1093,7 @@ static enum sci_status scic_sds_remote_device_ready_state_complete_request_handl /** * - * @this_device: The struct scic_sds_remote_device which is cast into a + * @sci_dev: The struct scic_sds_remote_device which is cast into a * struct scic_sds_remote_device. * * This method will stop a struct scic_sds_remote_device that is already in the @@ -1536,10 +1536,10 @@ static void scic_sds_remote_device_ready_state_exit( static void scic_sds_remote_device_stopping_state_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; SET_STATE_HANDLER( - this_device, + sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING ); @@ -1556,10 +1556,10 @@ static void scic_sds_remote_device_stopping_state_enter( static void scic_sds_remote_device_failed_state_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; SET_STATE_HANDLER( - this_device, + sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_FAILED ); @@ -1576,16 +1576,16 @@ static void scic_sds_remote_device_failed_state_enter( static void scic_sds_remote_device_resetting_state_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; SET_STATE_HANDLER( - this_device, + sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_RESETTING ); scic_sds_remote_node_context_suspend( - this_device->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); + sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); } /** @@ -1599,9 +1599,9 @@ static void scic_sds_remote_device_resetting_state_enter( static void scic_sds_remote_device_resetting_state_exit( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - scic_sds_remote_node_context_resume(this_device->rnc, NULL, NULL); + scic_sds_remote_node_context_resume(sci_dev->rnc, NULL, NULL); } /** @@ -1615,10 +1615,10 @@ static void scic_sds_remote_device_resetting_state_exit( static void scic_sds_remote_device_final_state_enter( struct sci_base_object *object) { - struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; SET_STATE_HANDLER( - this_device, + sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_FINAL ); diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index ebb0ac8..5d3df92 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -350,25 +350,25 @@ typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_ enum sci_io_status); typedef enum sci_status (*scic_sds_remote_device_handler_t)( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 suspend_type); typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index); typedef enum sci_status (*scic_sds_remote_device_event_handler_t)( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code); typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); /** * struct scic_sds_remote_device_state_handler - This structure conains the @@ -461,8 +461,8 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab * * This macro incrments the request count for this device */ -#define scic_sds_remote_device_increment_request_count(this_device) \ - ((this_device)->started_request_count++) +#define scic_sds_remote_device_increment_request_count(sci_dev) \ + ((sci_dev)->started_request_count++) /** * scic_sds_remote_device_decrement_request_count() - @@ -470,33 +470,33 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab * This macro decrements the request count for this device. This count will * never decrment past 0. */ -#define scic_sds_remote_device_decrement_request_count(this_device) \ - ((this_device)->started_request_count > 0 ? \ - (this_device)->started_request_count-- : 0) +#define scic_sds_remote_device_decrement_request_count(sci_dev) \ + ((sci_dev)->started_request_count > 0 ? \ + (sci_dev)->started_request_count-- : 0) /** * scic_sds_remote_device_get_request_count() - * * This is a helper macro to return the current device request count. */ -#define scic_sds_remote_device_get_request_count(this_device) \ - ((this_device)->started_request_count) +#define scic_sds_remote_device_get_request_count(sci_dev) \ + ((sci_dev)->started_request_count) /** * scic_sds_remote_device_get_port() - * * This macro returns the owning port of this remote device obejct. */ -#define scic_sds_remote_device_get_port(this_device) \ - ((this_device)->owning_port) +#define scic_sds_remote_device_get_port(sci_dev) \ + ((sci_dev)->owning_port) /** * scic_sds_remote_device_get_controller() - * * This macro returns the controller object that contains this device object */ -#define scic_sds_remote_device_get_controller(this_device) \ - scic_sds_port_get_controller(scic_sds_remote_device_get_port(this_device)) +#define scic_sds_remote_device_get_controller(sci_dev) \ + scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev)) /** * scic_sds_remote_device_set_state_handlers() - @@ -504,26 +504,26 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab * This macro sets the remote device state handlers pointer and is set on entry * to each device state. */ -#define scic_sds_remote_device_set_state_handlers(this_device, handlers) \ - ((this_device)->state_handlers = (handlers)) +#define scic_sds_remote_device_set_state_handlers(sci_dev, handlers) \ + ((sci_dev)->state_handlers = (handlers)) /** * scic_sds_remote_device_get_port() - * * This macro returns the owning port of this device */ -#define scic_sds_remote_device_get_port(this_device) \ - ((this_device)->owning_port) +#define scic_sds_remote_device_get_port(sci_dev) \ + ((sci_dev)->owning_port) /** * scic_sds_remote_device_get_sequence() - * * This macro returns the remote device sequence value */ -#define scic_sds_remote_device_get_sequence(this_device) \ +#define scic_sds_remote_device_get_sequence(sci_dev) \ (\ - scic_sds_remote_device_get_controller(this_device)-> \ - remote_device_sequence[(this_device)->rnc->remote_node_index] \ + scic_sds_remote_device_get_controller(sci_dev)-> \ + remote_device_sequence[(sci_dev)->rnc->remote_node_index] \ ) /** @@ -531,11 +531,11 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab * * This macro returns the controllers protocol engine group */ -#define scic_sds_remote_device_get_controller_peg(this_device) \ +#define scic_sds_remote_device_get_controller_peg(sci_dev) \ (\ scic_sds_controller_get_protocol_engine_group(\ scic_sds_port_get_controller(\ - scic_sds_remote_device_get_port(this_device) \ + scic_sds_remote_device_get_port(sci_dev) \ ) \ ) \ ) @@ -545,16 +545,16 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab * * This macro returns the port index for the devices owning port */ -#define scic_sds_remote_device_get_port_index(this_device) \ - (scic_sds_port_get_index(scic_sds_remote_device_get_port(this_device))) +#define scic_sds_remote_device_get_port_index(sci_dev) \ + (scic_sds_port_get_index(scic_sds_remote_device_get_port(sci_dev))) /** * scic_sds_remote_device_get_index() - * * This macro returns the remote node index for this device object */ -#define scic_sds_remote_device_get_index(this_device) \ - ((this_device)->rnc->remote_node_index) +#define scic_sds_remote_device_get_index(sci_dev) \ + ((sci_dev)->rnc->remote_node_index) /** * scic_sds_remote_device_build_command_context() - @@ -579,61 +579,61 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab ((device)->working_request = (request)) enum sci_status scic_sds_remote_device_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index); enum sci_status scic_sds_remote_device_event_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code); enum sci_status scic_sds_remote_device_start_io( struct scic_sds_controller *controller, - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request); enum sci_status scic_sds_remote_device_complete_io( struct scic_sds_controller *controller, - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request); enum sci_status scic_sds_remote_device_resume( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); enum sci_status scic_sds_remote_device_suspend( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 suspend_type); enum sci_status scic_sds_remote_device_start_task( struct scic_sds_controller *controller, - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request); void scic_sds_remote_device_post_request( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 request); #if !defined(DISABLE_ATAPI) bool scic_sds_remote_device_is_atapi( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); #else /* !defined(DISABLE_ATAPI) */ -#define scic_sds_remote_device_is_atapi(this_device) false +#define scic_sds_remote_device_is_atapi(sci_dev) false #endif /* !defined(DISABLE_ATAPI) */ void scic_sds_remote_device_start_request( - struct scic_sds_remote_device *this_device, - struct scic_sds_request *the_request, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req, enum sci_status status); void scic_sds_remote_device_continue_request(void *sci_dev); enum sci_status scic_sds_remote_device_default_start_handler( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); enum sci_status scic_sds_remote_device_default_fail_handler( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); enum sci_status scic_sds_remote_device_default_destruct_handler( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); enum sci_status scic_sds_remote_device_default_reset_handler( struct scic_sds_remote_device *device); @@ -654,15 +654,15 @@ enum sci_status scic_sds_remote_device_default_continue_request_handler( struct scic_sds_request *request); enum sci_status scic_sds_remote_device_default_suspend_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 suspend_type); enum sci_status scic_sds_remote_device_default_resume_handler( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); enum sci_status scic_sds_remote_device_default_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index); enum sci_status scic_sds_remote_device_ready_state_stop_handler( @@ -672,14 +672,14 @@ enum sci_status scic_sds_remote_device_ready_state_reset_handler( struct scic_sds_remote_device *device); enum sci_status scic_sds_remote_device_general_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index); enum sci_status scic_sds_remote_device_general_event_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code); enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler( - struct scic_sds_remote_device *this_device); + struct scic_sds_remote_device *sci_dev); #endif /* _SCIC_SDS_REMOTE_DEVICE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/core/scic_sds_remote_node_context.c index 81e4ab3..e329296 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.c +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.c @@ -67,7 +67,7 @@ /** * - * @this_rnc: The RNC for which the is posted request is being made. + * @sci_rnc: The RNC for which the is posted request is being made. * * This method will return true if the RNC is not in the initial state. In all * other states the RNC is considered active and this will return true. The @@ -79,16 +79,16 @@ /** * - * @this_rnc: The state of the remote node context object to check. + * @sci_rnc: The state of the remote node context object to check. * * This method will return true if the remote node context is in a READY state * otherwise it will return false bool true if the remote node context is in * the ready state. false if the remote node context is not in the ready state. */ bool scic_sds_remote_node_context_is_ready( - struct scic_sds_remote_node_context *this_rnc) + struct scic_sds_remote_node_context *sci_rnc) { - u32 current_state = sci_base_state_machine_get_state(&this_rnc->state_machine); + u32 current_state = sci_base_state_machine_get_state(&sci_rnc->state_machine); if (current_state == SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { return true; @@ -99,36 +99,36 @@ bool scic_sds_remote_node_context_is_ready( /** * - * @this_device: The remote device to use to construct the RNC buffer. + * @sci_dev: The remote device to use to construct the RNC buffer. * @rnc: The buffer into which the remote device data will be copied. * * This method will construct the RNC buffer for this remote device object. none */ static void scic_sds_remote_node_context_construct_buffer( - struct scic_sds_remote_node_context *this_rnc) + struct scic_sds_remote_node_context *sci_rnc) { union scu_remote_node_context *rnc; - struct scic_sds_controller *the_controller; + struct scic_sds_controller *scic; - the_controller = scic_sds_remote_device_get_controller(this_rnc->device); + scic = scic_sds_remote_device_get_controller(sci_rnc->device); rnc = scic_sds_controller_get_remote_node_context_buffer( - the_controller, this_rnc->remote_node_index); + scic, sci_rnc->remote_node_index); memset( rnc, 0x00, sizeof(union scu_remote_node_context) - * scic_sds_remote_device_node_count(this_rnc->device) + * scic_sds_remote_device_node_count(sci_rnc->device) ); - rnc->ssp.remote_node_index = this_rnc->remote_node_index; - rnc->ssp.remote_node_port_width = this_rnc->device->device_port_width; + rnc->ssp.remote_node_index = sci_rnc->remote_node_index; + rnc->ssp.remote_node_port_width = sci_rnc->device->device_port_width; rnc->ssp.logical_port_index = - scic_sds_remote_device_get_port_index(this_rnc->device); + scic_sds_remote_device_get_port_index(sci_rnc->device); - rnc->ssp.remote_sas_address_hi = SCIC_SWAP_DWORD(this_rnc->device->device_address.high); - rnc->ssp.remote_sas_address_lo = SCIC_SWAP_DWORD(this_rnc->device->device_address.low); + rnc->ssp.remote_sas_address_hi = SCIC_SWAP_DWORD(sci_rnc->device->device_address.high); + rnc->ssp.remote_sas_address_lo = SCIC_SWAP_DWORD(sci_rnc->device->device_address.low); rnc->ssp.nexus_loss_timer_enable = true; rnc->ssp.check_bit = false; @@ -140,24 +140,24 @@ static void scic_sds_remote_node_context_construct_buffer( if ( - this_rnc->device->target_protocols.u.bits.attached_sata_device - || this_rnc->device->target_protocols.u.bits.attached_stp_target + sci_rnc->device->target_protocols.u.bits.attached_sata_device + || sci_rnc->device->target_protocols.u.bits.attached_stp_target ) { rnc->ssp.connection_occupancy_timeout = - the_controller->user_parameters.sds1.stp_max_occupancy_timeout; + scic->user_parameters.sds1.stp_max_occupancy_timeout; rnc->ssp.connection_inactivity_timeout = - the_controller->user_parameters.sds1.stp_inactivity_timeout; + scic->user_parameters.sds1.stp_inactivity_timeout; } else { rnc->ssp.connection_occupancy_timeout = - the_controller->user_parameters.sds1.ssp_max_occupancy_timeout; + scic->user_parameters.sds1.ssp_max_occupancy_timeout; rnc->ssp.connection_inactivity_timeout = - the_controller->user_parameters.sds1.ssp_inactivity_timeout; + scic->user_parameters.sds1.ssp_inactivity_timeout; } rnc->ssp.initial_arbitration_wait_time = 0; /* Open Address Frame Parameters */ - rnc->ssp.oaf_connection_rate = this_rnc->device->connection_rate; + rnc->ssp.oaf_connection_rate = sci_rnc->device->connection_rate; rnc->ssp.oaf_features = 0; rnc->ssp.oaf_source_zone_group = 0; rnc->ssp.oaf_more_compatibility_features = 0; @@ -165,8 +165,8 @@ static void scic_sds_remote_node_context_construct_buffer( /** * - * @this_rnc: - * @the_callback: + * @sci_rnc: + * @callback: * @callback_parameter: * * This method will setup the remote node context object so it will transition @@ -174,52 +174,52 @@ static void scic_sds_remote_node_context_construct_buffer( * transition to its final state then this function does nothing. none */ static void scic_sds_remote_node_context_setup_to_resume( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { - if (this_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { - this_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY; - this_rnc->user_callback = the_callback; - this_rnc->user_cookie = callback_parameter; + if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { + sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; } } /** * - * @this_rnc: - * @the_callback: + * @sci_rnc: + * @callback: * @callback_parameter: * * This method will setup the remote node context object so it will transistion * to its final state. none */ static void scic_sds_remote_node_context_setup_to_destory( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { - this_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL; - this_rnc->user_callback = the_callback; - this_rnc->user_cookie = callback_parameter; + sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; } /** * - * @this_rnc: - * @the_callback: + * @sci_rnc: + * @callback: * * This method will continue to resume a remote node context. This is used in * the states where a resume is requested while a resume is in progress. */ static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { - if (this_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { - this_rnc->user_callback = the_callback; - this_rnc->user_cookie = callback_parameter; + if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; return SCI_SUCCESS; } @@ -230,16 +230,16 @@ static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( /* --------------------------------------------------------------------------- */ static enum sci_status scic_sds_remote_node_context_default_destruct_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to stop while " "in unexpected state %d\n", __func__, - this_rnc, - sci_base_state_machine_get_state(&this_rnc->state_machine)); + sci_rnc, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); /* * We have decided that the destruct request on the remote node context can not fail @@ -248,101 +248,101 @@ static enum sci_status scic_sds_remote_node_context_default_destruct_handler( } static enum sci_status scic_sds_remote_node_context_default_suspend_handler( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 suspend_type, - scics_sds_remote_node_context_callback the_callback, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to suspend " "while in wrong state %d\n", __func__, - this_rnc, - sci_base_state_machine_get_state(&this_rnc->state_machine)); + sci_rnc, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_remote_node_context_default_resume_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to resume " "while in wrong state %d\n", __func__, - this_rnc, - sci_base_state_machine_get_state(&this_rnc->state_machine)); + sci_rnc, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); return SCI_FAILURE_INVALID_STATE; } static enum sci_status scic_sds_remote_node_context_default_start_io_handler( - struct scic_sds_remote_node_context *this_rnc, - struct scic_sds_request *the_request) + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) { - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to start io " "0x%p while in wrong state %d\n", __func__, - this_rnc, - the_request, - sci_base_state_machine_get_state(&this_rnc->state_machine)); + sci_rnc, + sci_req, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; } static enum sci_status scic_sds_remote_node_context_default_start_task_handler( - struct scic_sds_remote_node_context *this_rnc, - struct scic_sds_request *the_request) + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) { - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to start " "task 0x%p while in wrong state %d\n", __func__, - this_rnc, - the_request, - sci_base_state_machine_get_state(&this_rnc->state_machine)); + sci_rnc, + sci_req, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); return SCI_FAILURE; } static enum sci_status scic_sds_remote_node_context_default_event_handler( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 event_code) { - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to process " "event 0x%x while in wrong state %d\n", __func__, - this_rnc, + sci_rnc, event_code, - sci_base_state_machine_get_state(&this_rnc->state_machine)); + sci_base_state_machine_get_state(&sci_rnc->state_machine)); return SCI_FAILURE_INVALID_STATE; } /** * - * @this_rnc: The rnc for which the task request is targeted. - * @the_request: The request which is going to be started. + * @sci_rnc: The rnc for which the task request is targeted. + * @sci_req: The request which is going to be started. * * This method determines if the task request can be started by the SCU * hardware. When the RNC is in the ready state any task can be started. * enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_remote_node_context_success_start_task_handler( - struct scic_sds_remote_node_context *this_rnc, - struct scic_sds_request *the_request) + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) { return SCI_SUCCESS; } /** * - * @this_rnc: - * @the_callback: + * @sci_rnc: + * @callback: * @callback_parameter: * * This method handles destruct calls from the various state handlers. The @@ -351,16 +351,16 @@ static enum sci_status scic_sds_remote_node_context_success_start_task_handler( * callback. enum sci_status */ static enum sci_status scic_sds_remote_node_context_general_destruct_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { scic_sds_remote_node_context_setup_to_destory( - this_rnc, the_callback, callback_parameter + sci_rnc, callback, callback_parameter ); sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE ); @@ -370,19 +370,19 @@ static enum sci_status scic_sds_remote_node_context_general_destruct_handler( /* --------------------------------------------------------------------------- */ static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { - if (this_rnc->remote_node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + if (sci_rnc->remote_node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { scic_sds_remote_node_context_setup_to_resume( - this_rnc, the_callback, callback_parameter + sci_rnc, callback, callback_parameter ); - scic_sds_remote_node_context_construct_buffer(this_rnc); + scic_sds_remote_node_context_construct_buffer(sci_rnc); sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE ); @@ -395,7 +395,7 @@ static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler /* --------------------------------------------------------------------------- */ static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 event_code) { enum sci_status status; @@ -405,19 +405,19 @@ static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( status = SCI_SUCCESS; sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE ); break; default: status = SCI_FAILURE; - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to " "process unexpected event 0x%x while in posting " "state\n", __func__, - this_rnc, + sci_rnc, event_code); break; } @@ -428,19 +428,19 @@ static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( /* --------------------------------------------------------------------------- */ static enum sci_status scic_sds_remote_node_context_invalidating_state_destruct_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { scic_sds_remote_node_context_setup_to_destory( - this_rnc, the_callback, callback_parameter + sci_rnc, callback, callback_parameter ); return SCI_SUCCESS; } static enum sci_status scic_sds_remote_node_context_invalidating_state_event_handler( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 event_code) { enum sci_status status; @@ -448,14 +448,14 @@ static enum sci_status scic_sds_remote_node_context_invalidating_state_event_han if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { status = SCI_SUCCESS; - if (this_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { + if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE ); } else { sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE ); } @@ -466,25 +466,25 @@ static enum sci_status scic_sds_remote_node_context_invalidating_state_event_han /* * We really dont care if the hardware is going to suspend * the device since it's being invalidated anyway */ - dev_dbg(scirdev_to_dev(this_rnc->device), + dev_dbg(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p was " "suspeneded by hardware while being " "invalidated.\n", __func__, - this_rnc); + sci_rnc); status = SCI_SUCCESS; break; default: - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p " "requested to process event 0x%x while " "in state %d.\n", __func__, - this_rnc, + sci_rnc, event_code, sci_base_state_machine_get_state( - &this_rnc->state_machine)); + &sci_rnc->state_machine)); status = SCI_FAILURE; break; } @@ -497,7 +497,7 @@ static enum sci_status scic_sds_remote_node_context_invalidating_state_event_han static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 event_code) { enum sci_status status; @@ -506,7 +506,7 @@ static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler status = SCI_SUCCESS; sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE ); } else { @@ -516,23 +516,23 @@ static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler /* * We really dont care if the hardware is going to suspend * the device since it's being resumed anyway */ - dev_dbg(scirdev_to_dev(this_rnc->device), + dev_dbg(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p was " "suspeneded by hardware while being resumed.\n", __func__, - this_rnc); + sci_rnc); status = SCI_SUCCESS; break; default: - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested " "to process event 0x%x while in state %d.\n", __func__, - this_rnc, + sci_rnc, event_code, sci_base_state_machine_get_state( - &this_rnc->state_machine)); + &sci_rnc->state_machine)); status = SCI_FAILURE; break; } @@ -545,32 +545,32 @@ static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler /** * - * @this_rnc: The remote node context object being suspended. - * @the_callback: The callback when the suspension is complete. + * @sci_rnc: The remote node context object being suspended. + * @callback: The callback when the suspension is complete. * @callback_parameter: The parameter that is to be passed into the callback. * * This method will handle the suspend requests from the ready state. * SCI_SUCCESS */ static enum sci_status scic_sds_remote_node_context_ready_state_suspend_handler( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 suspend_type, - scics_sds_remote_node_context_callback the_callback, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { - this_rnc->user_callback = the_callback; - this_rnc->user_cookie = callback_parameter; - this_rnc->suspension_code = suspend_type; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; + sci_rnc->suspension_code = suspend_type; if (suspend_type == SCI_SOFTWARE_SUSPENSION) { scic_sds_remote_device_post_request( - this_rnc->device, + sci_rnc->device, SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX ); } sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE ); @@ -579,23 +579,23 @@ static enum sci_status scic_sds_remote_node_context_ready_state_suspend_handler( /** * - * @this_rnc: The rnc for which the io request is targeted. - * @the_request: The request which is going to be started. + * @sci_rnc: The rnc for which the io request is targeted. + * @sci_req: The request which is going to be started. * * This method determines if the io request can be started by the SCU hardware. * When the RNC is in the ready state any io request can be started. enum sci_status * SCI_SUCCESS */ static enum sci_status scic_sds_remote_node_context_ready_state_start_io_handler( - struct scic_sds_remote_node_context *this_rnc, - struct scic_sds_request *the_request) + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) { return SCI_SUCCESS; } static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 event_code) { enum sci_status status; @@ -603,33 +603,33 @@ static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( switch (scu_get_event_type(event_code)) { case SCU_EVENT_TL_RNC_SUSPEND_TX: sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE ); - this_rnc->suspension_code = scu_get_event_specifier(event_code); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); status = SCI_SUCCESS; break; case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE ); - this_rnc->suspension_code = scu_get_event_specifier(event_code); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); status = SCI_SUCCESS; break; default: - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to " "process event 0x%x while in state %d.\n", __func__, - this_rnc, + sci_rnc, event_code, sci_base_state_machine_get_state( - &this_rnc->state_machine)); + &sci_rnc->state_machine)); status = SCI_FAILURE; break; @@ -641,41 +641,41 @@ static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( /* --------------------------------------------------------------------------- */ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { enum sci_status status; struct smp_discover_response_protocols protocols; scic_sds_remote_node_context_setup_to_resume( - this_rnc, the_callback, callback_parameter + sci_rnc, callback, callback_parameter ); /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ - scic_remote_device_get_protocols(this_rnc->device, &protocols); + scic_remote_device_get_protocols(sci_rnc->device, &protocols); if ( (protocols.u.bits.attached_ssp_target == 1) || (protocols.u.bits.attached_smp_target == 1) ) { sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE ); status = SCI_SUCCESS; } else if (protocols.u.bits.attached_stp_target == 1) { - if (this_rnc->device->is_direct_attached) { + if (sci_rnc->device->is_direct_attached) { /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE ); } else { sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE ); } @@ -690,8 +690,8 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha /** * - * @this_rnc: The remote node context which is to receive the task request. - * @the_request: The task request to be transmitted to to the remote target + * @sci_rnc: The remote node context which is to receive the task request. + * @sci_req: The task request to be transmitted to to the remote target * device. * * This method will report a success or failure attempt to start a new task @@ -700,10 +700,10 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha * enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_remote_node_context_suspended_start_task_handler( - struct scic_sds_remote_node_context *this_rnc, - struct scic_sds_request *the_request) + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) { - scic_sds_remote_node_context_resume(this_rnc, NULL, NULL); + scic_sds_remote_node_context_resume(sci_rnc, NULL, NULL); return SCI_SUCCESS; } @@ -711,16 +711,16 @@ static enum sci_status scic_sds_remote_node_context_suspended_start_task_handler /* --------------------------------------------------------------------------- */ static enum sci_status scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { scic_sds_remote_node_context_setup_to_resume( - this_rnc, the_callback, callback_parameter + sci_rnc, callback, callback_parameter ); sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE ); @@ -735,12 +735,12 @@ static enum sci_status scic_sds_remote_node_context_tx_rx_suspended_state_resume * */ static enum sci_status scic_sds_remote_node_context_await_suspension_state_resume_handler( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter) { scic_sds_remote_node_context_setup_to_resume( - this_rnc, the_callback, callback_parameter + sci_rnc, callback, callback_parameter ); return SCI_SUCCESS; @@ -748,8 +748,8 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_resum /** * - * @this_rnc: The remote node context which is to receive the task request. - * @the_request: The task request to be transmitted to to the remote target + * @sci_rnc: The remote node context which is to receive the task request. + * @sci_req: The task request to be transmitted to to the remote target * device. * * This method will report a success or failure attempt to start a new task @@ -758,14 +758,14 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_resum * enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_remote_node_context_await_suspension_state_start_task_handler( - struct scic_sds_remote_node_context *this_rnc, - struct scic_sds_request *the_request) + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) { return SCI_SUCCESS; } static enum sci_status scic_sds_remote_node_context_await_suspension_state_event_handler( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 event_code) { enum sci_status status; @@ -773,33 +773,33 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_event switch (scu_get_event_type(event_code)) { case SCU_EVENT_TL_RNC_SUSPEND_TX: sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE ); - this_rnc->suspension_code = scu_get_event_specifier(event_code); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); status = SCI_SUCCESS; break; case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: sci_base_state_machine_change_state( - &this_rnc->state_machine, + &sci_rnc->state_machine, SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE ); - this_rnc->suspension_code = scu_get_event_specifier(event_code); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); status = SCI_SUCCESS; break; default: - dev_warn(scirdev_to_dev(this_rnc->device), + dev_warn(scirdev_to_dev(sci_rnc->device), "%s: SCIC Remote Node Context 0x%p requested to " "process event 0x%x while in state %d.\n", __func__, - this_rnc, + sci_rnc, event_code, sci_base_state_machine_get_state( - &this_rnc->state_machine)); + &sci_rnc->state_machine)); status = SCI_FAILURE; break; @@ -929,41 +929,41 @@ static void scic_sds_remote_node_context_continue_state_transitions( /** * - * @this_rnc: The remote node context object that is to be validated. + * @sci_rnc: The remote node context object that is to be validated. * * This method will mark the rnc buffer as being valid and post the request to * the hardware. none */ static void scic_sds_remote_node_context_validate_context_buffer( - struct scic_sds_remote_node_context *this_rnc) + struct scic_sds_remote_node_context *sci_rnc) { union scu_remote_node_context *rnc_buffer; rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(this_rnc->device), - this_rnc->remote_node_index + scic_sds_remote_device_get_controller(sci_rnc->device), + sci_rnc->remote_node_index ); rnc_buffer->ssp.is_valid = true; if ( - !this_rnc->device->is_direct_attached - && this_rnc->device->target_protocols.u.bits.attached_stp_target + !sci_rnc->device->is_direct_attached + && sci_rnc->device->target_protocols.u.bits.attached_stp_target ) { scic_sds_remote_device_post_request( - this_rnc->device, + sci_rnc->device, SCU_CONTEXT_COMMAND_POST_RNC_96 ); } else { scic_sds_remote_device_post_request( - this_rnc->device, + sci_rnc->device, SCU_CONTEXT_COMMAND_POST_RNC_32 ); - if (this_rnc->device->is_direct_attached) { + if (sci_rnc->device->is_direct_attached) { scic_sds_port_setup_transports( - this_rnc->device->owning_port, - this_rnc->remote_node_index + sci_rnc->device->owning_port, + sci_rnc->remote_node_index ); } } @@ -971,24 +971,24 @@ static void scic_sds_remote_node_context_validate_context_buffer( /** * - * @this_rnc: The remote node context object that is to be invalidated. + * @sci_rnc: The remote node context object that is to be invalidated. * * This method will update the RNC buffer and post the invalidate request. none */ static void scic_sds_remote_node_context_invalidate_context_buffer( - struct scic_sds_remote_node_context *this_rnc) + struct scic_sds_remote_node_context *sci_rnc) { union scu_remote_node_context *rnc_buffer; rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(this_rnc->device), - this_rnc->remote_node_index + scic_sds_remote_device_get_controller(sci_rnc->device), + sci_rnc->remote_node_index ); rnc_buffer->ssp.is_valid = false; scic_sds_remote_device_post_request( - this_rnc->device, + sci_rnc->device, SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE ); } @@ -1037,17 +1037,17 @@ static void scic_sds_remote_node_context_initial_state_enter( static void scic_sds_remote_node_context_posting_state_enter( struct sci_base_object *object) { - struct scic_sds_remote_node_context *this_rnc; + struct scic_sds_remote_node_context *sci_rnc; - this_rnc = (struct scic_sds_remote_node_context *)object; + sci_rnc = (struct scic_sds_remote_node_context *)object; SET_STATE_HANDLER( - this_rnc, + sci_rnc, scic_sds_remote_node_context_state_handler_table, SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE ); - scic_sds_remote_node_context_validate_context_buffer(this_rnc); + scic_sds_remote_node_context_validate_context_buffer(sci_rnc); } /** diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h index e21abe2..a103f15 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.h @@ -86,25 +86,25 @@ struct scic_sds_remote_node_context; typedef void (*scics_sds_remote_node_context_callback)(void *); typedef enum sci_status (*scic_sds_remote_node_context_operation)( - struct scic_sds_remote_node_context *this_rnc, - scics_sds_remote_node_context_callback the_callback, + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, void *callback_parameter ); typedef enum sci_status (*scic_sds_remote_node_context_suspend_operation)( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 suspension_type, - scics_sds_remote_node_context_callback the_callback, + scics_sds_remote_node_context_callback callback, void *callback_parameter ); typedef enum sci_status (*scic_sds_remote_node_context_io_request)( - struct scic_sds_remote_node_context *this_rnc, - struct scic_sds_request *the_request + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req ); typedef enum sci_status (*scic_sds_remote_node_context_event_handler)( - struct scic_sds_remote_node_context *this_rnc, + struct scic_sds_remote_node_context *sci_rnc, u32 event_code ); @@ -286,7 +286,7 @@ void scic_sds_remote_node_context_construct( bool scic_sds_remote_node_context_is_ready( - struct scic_sds_remote_node_context *this_rnc); + struct scic_sds_remote_node_context *sci_rnc); #define scic_sds_remote_node_context_get_remote_node_index(rcn) \ ((rnc)->remote_node_index) diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index a6ee155..8a608f0 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -226,7 +226,7 @@ static u32 scic_sds_ssp_request_get_object_size(void) /** * This method returns the sgl element pair for the specificed sgl_pair index. - * @this_request: This parameter specifies the IO request for which to retrieve + * @sci_req: This parameter specifies the IO request for which to retrieve * the Scatter-Gather List element pair. * @sgl_pair_index: This parameter specifies the index into the SGL element * pair to be retrieved. @@ -234,12 +234,12 @@ static u32 scic_sds_ssp_request_get_object_size(void) * This method returns a pointer to an struct scu_sgl_element_pair. */ static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 sgl_pair_index ) { struct scu_task_context *task_context; - task_context = (struct scu_task_context *)this_request->task_context_buffer; + task_context = (struct scu_task_context *)sci_req->task_context_buffer; if (sgl_pair_index == 0) { return &task_context->sgl_pair_ab; @@ -247,12 +247,12 @@ static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( return &task_context->sgl_pair_cd; } - return &this_request->sgl_element_pair_buffer[sgl_pair_index - 2]; + return &sci_req->sgl_element_pair_buffer[sgl_pair_index - 2]; } /** * This function will build the SGL list for an IO request. - * @this_request: This parameter specifies the IO request for which to build + * @sci_req: This parameter specifies the IO request for which to build * the Scatter-Gather List. * */ @@ -325,36 +325,36 @@ void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) /** * This method build the remainder of the IO request object. - * @this_request: This parameter specifies the request object being constructed. + * @sci_req: This parameter specifies the request object being constructed. * * The scic_sds_general_request_construct() must be called before this call is * valid. none */ static void scic_sds_ssp_io_request_assign_buffers( - struct scic_sds_request *this_request) + struct scic_sds_request *sci_req) { - this_request->command_buffer = - scic_sds_ssp_request_get_command_buffer(this_request); - this_request->response_buffer = - scic_sds_ssp_request_get_response_buffer(this_request); - this_request->sgl_element_pair_buffer = - scic_sds_ssp_request_get_sgl_element_buffer(this_request); - this_request->sgl_element_pair_buffer = - PTR_ALIGN(this_request->sgl_element_pair_buffer, + sci_req->command_buffer = + scic_sds_ssp_request_get_command_buffer(sci_req); + sci_req->response_buffer = + scic_sds_ssp_request_get_response_buffer(sci_req); + sci_req->sgl_element_pair_buffer = + scic_sds_ssp_request_get_sgl_element_buffer(sci_req); + sci_req->sgl_element_pair_buffer = + PTR_ALIGN(sci_req->sgl_element_pair_buffer, sizeof(struct scu_sgl_element_pair)); - if (this_request->was_tag_assigned_by_user == false) { - this_request->task_context_buffer = - scic_sds_ssp_request_get_task_context_buffer(this_request); - this_request->task_context_buffer = - PTR_ALIGN(this_request->task_context_buffer, + if (sci_req->was_tag_assigned_by_user == false) { + sci_req->task_context_buffer = + scic_sds_ssp_request_get_task_context_buffer(sci_req); + sci_req->task_context_buffer = + PTR_ALIGN(sci_req->task_context_buffer, SMP_CACHE_BYTES); } } /** * This method constructs the SSP Command IU data for this io request object. - * @this_request: This parameter specifies the request object for which the SSP + * @sci_req: This parameter specifies the request object for which the SSP * command information unit is being built. * */ @@ -401,7 +401,7 @@ static void scic_sds_io_request_build_ssp_command_iu( /** * This method constructs the SSP Task IU data for this io request object. - * @this_request: + * @sci_req: * */ static void scic_sds_task_request_build_ssp_task_iu( @@ -430,7 +430,7 @@ static void scic_sds_task_request_build_ssp_task_iu( /** * This method is will fill in the SCU Task Context for any type of SSP request. - * @this_request: + * @sci_req: * @task_context: * */ @@ -474,7 +474,7 @@ static void scu_ssp_reqeust_construct_task_context( task_context->address_modifier = 0; - /* task_context->type.ssp.tag = this_request->io_tag; */ + /* task_context->type.ssp.tag = sci_req->io_tag; */ task_context->task_phase = 0x01; if (sds_request->was_tag_assigned_by_user) { @@ -530,7 +530,7 @@ static void scu_ssp_reqeust_construct_task_context( /** * This method is will fill in the SCU Task Context for a SSP IO request. - * @this_request: + * @sci_req: * */ static void scu_ssp_io_request_construct_task_context( @@ -568,24 +568,24 @@ static void scu_ssp_io_request_construct_task_context( /** * This method will fill in the remainder of the io request object for SSP Task * requests. - * @this_request: + * @sci_req: * */ static void scic_sds_ssp_task_request_assign_buffers( - struct scic_sds_request *this_request) + struct scic_sds_request *sci_req) { /* Assign all of the buffer pointers */ - this_request->command_buffer = - scic_sds_ssp_task_request_get_command_buffer(this_request); - this_request->response_buffer = - scic_sds_ssp_task_request_get_response_buffer(this_request); - this_request->sgl_element_pair_buffer = NULL; - - if (this_request->was_tag_assigned_by_user == false) { - this_request->task_context_buffer = - scic_sds_ssp_task_request_get_task_context_buffer(this_request); - this_request->task_context_buffer = - PTR_ALIGN(this_request->task_context_buffer, SMP_CACHE_BYTES); + sci_req->command_buffer = + scic_sds_ssp_task_request_get_command_buffer(sci_req); + sci_req->response_buffer = + scic_sds_ssp_task_request_get_response_buffer(sci_req); + sci_req->sgl_element_pair_buffer = NULL; + + if (sci_req->was_tag_assigned_by_user == false) { + sci_req->task_context_buffer = + scic_sds_ssp_task_request_get_task_context_buffer(sci_req); + sci_req->task_context_buffer = + PTR_ALIGN(sci_req->task_context_buffer, SMP_CACHE_BYTES); } } @@ -598,18 +598,18 @@ static void scic_sds_ssp_task_request_assign_buffers( * (i.e. non-raw frame) is being utilized to perform task management. -# * control_frame == 1. This ensures that the proper endianess is set so * that the bytes are transmitted in the right order for a task frame. - * @this_request: This parameter specifies the task request object being + * @sci_req: This parameter specifies the task request object being * constructed. * */ static void scu_ssp_task_request_construct_task_context( - struct scic_sds_request *this_request) + struct scic_sds_request *sci_req) { struct scu_task_context *task_context; - task_context = scic_sds_request_get_task_context(this_request); + task_context = scic_sds_request_get_task_context(sci_req); - scu_ssp_reqeust_construct_task_context(this_request, task_context); + scu_ssp_reqeust_construct_task_context(sci_req, task_context); task_context->control_frame = 1; task_context->priority = SCU_TASK_PRIORITY_HIGH; @@ -623,7 +623,7 @@ static void scu_ssp_task_request_construct_task_context( /** * This method constructs the SSP Command IU data for this ssp passthrough * comand request object. - * @this_request: This parameter specifies the request object for which the SSP + * @sci_req: This parameter specifies the request object for which the SSP * command information unit is being built. * * enum sci_status, returns invalid parameter is cdb > 16 @@ -632,7 +632,7 @@ static void scu_ssp_task_request_construct_task_context( /** * This method constructs the SATA request object. - * @this_request: + * @sci_req: * @sat_protocol: * @transfer_length: * @data_direction: @@ -964,7 +964,7 @@ scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completi /** * - * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the start + * @sci_req: The SCIC_SDS_IO_REQUEST_T object for which the start * operation is to be executed. * @frame_index: The frame index returned by the hardware for the reqeust * object. @@ -992,7 +992,7 @@ enum sci_status scic_sds_io_request_frame_handler( /** * - * @this_request: The SCIC_SDS_IO_REQUEST_T object for which the task start + * @sci_req: The SCIC_SDS_IO_REQUEST_T object for which the task start * operation is to be executed. * * This method invokes the core state task complete handler for the @@ -1007,7 +1007,7 @@ enum sci_status scic_sds_io_request_frame_handler( /** * This method copies response data for requests returning response data * instead of sense data. - * @this_request: This parameter specifies the request object for which to copy + * @sci_req: This parameter specifies the request object for which to copy * the response data. * */ @@ -1161,14 +1161,14 @@ enum sci_status scic_sds_request_started_state_abort_handler( * TC (task context) completions for normal IO request (i.e. Task/Abort * Completions of type 0). This method will update the * SCIC_SDS_IO_REQUEST_T::status field. - * @this_request: This parameter specifies the request for which a completion + * @sci_req: This parameter specifies the request for which a completion * occurred. * @completion_code: This parameter specifies the completion code received from * the SCU. * */ enum sci_status scic_sds_request_started_state_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { u8 data_present; @@ -1181,7 +1181,7 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); break; @@ -1194,20 +1194,20 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( * response stats to see if this is truly a failed request or a good * request that just got completed early. */ struct sci_ssp_response_iu *response = (struct sci_ssp_response_iu *) - this_request->response_buffer; + sci_req->response_buffer; scic_word_copy_with_swap( - this_request->response_buffer, - this_request->response_buffer, + sci_req->response_buffer, + sci_req->response_buffer, sizeof(struct sci_ssp_response_iu) / sizeof(u32) ); if (response->status == 0) { scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY ); } else { scic_sds_request_set_status( - this_request, + sci_req, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); @@ -1217,13 +1217,13 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): scic_word_copy_with_swap( - this_request->response_buffer, - this_request->response_buffer, + sci_req->response_buffer, + sci_req->response_buffer, sizeof(struct sci_ssp_response_iu) / sizeof(u32) ); scic_sds_request_set_status( - this_request, + sci_req, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); @@ -1234,19 +1234,19 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( * / @todo With TASK_DONE_RESP_LEN_ERR is the response frame guaranteed * / to be received before this completion status is posted? */ response_buffer = - (struct sci_ssp_response_iu *)this_request->response_buffer; + (struct sci_ssp_response_iu *)sci_req->response_buffer; data_present = response_buffer->data_present & SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK; if ((data_present == 0x01) || (data_present == 0x02)) { scic_sds_request_set_status( - this_request, + sci_req, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); } else { scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); } break; @@ -1263,15 +1263,15 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): - if (this_request->protocol == SCIC_STP_PROTOCOL) { + if (sci_req->protocol == SCIC_STP_PROTOCOL) { scic_sds_request_set_status( - this_request, + sci_req, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED ); } else { scic_sds_request_set_status( - this_request, + sci_req, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); @@ -1290,7 +1290,7 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): scic_sds_request_set_status( - this_request, + sci_req, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED ); @@ -1314,7 +1314,7 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): default: scic_sds_request_set_status( - this_request, + sci_req, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); @@ -1326,7 +1326,7 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( */ /* In all cases we will treat this as the completion of the IO request. */ - sci_base_state_machine_change_state(&this_request->state_machine, + sci_base_state_machine_change_state(&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } @@ -1340,7 +1340,7 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( * logged. enum sci_status SCI_SUCCESS SCI_FAILURE_INVALID_PARAMETER_VALUE */ static enum sci_status scic_sds_request_started_state_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; @@ -1348,7 +1348,7 @@ static enum sci_status scic_sds_request_started_state_frame_handler( /* / @todo If this is a response frame we must record that we received it */ status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_request_get_controller(this_request)->uf_control), + &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, (void **)&frame_header ); @@ -1357,37 +1357,37 @@ static enum sci_status scic_sds_request_started_state_frame_handler( struct sci_ssp_response_iu *response_buffer; status = scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_request_get_controller(this_request)->uf_control), + &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, (void **)&response_buffer ); scic_word_copy_with_swap( - this_request->response_buffer, + sci_req->response_buffer, (u32 *)response_buffer, sizeof(struct sci_ssp_response_iu) ); - response_buffer = (struct sci_ssp_response_iu *)this_request->response_buffer; + response_buffer = (struct sci_ssp_response_iu *)sci_req->response_buffer; if ((response_buffer->data_present == 0x01) || (response_buffer->data_present == 0x02)) { scic_sds_request_set_status( - this_request, + sci_req, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); } else scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); } else /* This was not a response frame why did it get forwarded? */ - dev_err(scic_to_dev(this_request->owning_controller), + dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC IO Request 0x%p received unexpected " "frame %d type 0x%02x\n", __func__, - this_request, + sci_req, frame_index, frame_header->frame_type); @@ -1395,7 +1395,7 @@ static enum sci_status scic_sds_request_started_state_frame_handler( * In any case we are done with this frame buffer return it to the * controller */ scic_sds_controller_release_frame( - this_request->owning_controller, frame_index + sci_req->owning_controller, frame_index ); return SCI_SUCCESS; @@ -1460,17 +1460,17 @@ static enum sci_status scic_sds_request_aborting_state_abort_handler( * transitions to the completed state. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED + sci_req, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED ); - sci_base_state_machine_change_state(&this_request->state_machine, + sci_base_state_machine_change_state(&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; @@ -1491,13 +1491,13 @@ static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( * completion. enum sci_status SCI_SUCCESS */ static enum sci_status scic_sds_request_aborting_state_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 frame_index) { /* TODO: Is it even possible to get an unsolicited frame in the aborting state? */ scic_sds_controller_release_frame( - this_request->owning_controller, frame_index); + sci_req->owning_controller, frame_index); return SCI_SUCCESS; } @@ -1539,10 +1539,10 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han static void scic_sds_request_initial_state_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_request_state_handler_table, SCI_BASE_REQUEST_STATE_INITIAL ); @@ -1559,10 +1559,10 @@ static void scic_sds_request_initial_state_enter( static void scic_sds_request_constructed_state_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_request_state_handler_table, SCI_BASE_REQUEST_STATE_CONSTRUCTED ); @@ -1580,10 +1580,10 @@ static void scic_sds_request_constructed_state_enter( static void scic_sds_request_started_state_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_request_state_handler_table, SCI_BASE_REQUEST_STATE_STARTED ); @@ -1591,8 +1591,8 @@ static void scic_sds_request_started_state_enter( /* * Most of the request state machines have a started substate machine so * start its execution on the entry to the started state. */ - if (this_request->has_started_substate_machine == true) - sci_base_state_machine_start(&this_request->started_substate_machine); + if (sci_req->has_started_substate_machine == true) + sci_base_state_machine_start(&sci_req->started_substate_machine); } /** @@ -1608,10 +1608,10 @@ static void scic_sds_request_started_state_enter( static void scic_sds_request_started_state_exit( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; - if (this_request->has_started_substate_machine == true) - sci_base_state_machine_stop(&this_request->started_substate_machine); + if (sci_req->has_started_substate_machine == true) + sci_base_state_machine_stop(&sci_req->started_substate_machine); } /** @@ -1660,13 +1660,13 @@ static void scic_sds_request_completed_state_enter( static void scic_sds_request_aborting_state_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; /* Setting the abort bit in the Task Context is required by the silicon. */ - this_request->task_context_buffer->abort = 1; + sci_req->task_context_buffer->abort = 1; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_request_state_handler_table, SCI_BASE_REQUEST_STATE_ABORTING ); @@ -1684,10 +1684,10 @@ static void scic_sds_request_aborting_state_enter( static void scic_sds_request_final_state_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_request_state_handler_table, SCI_BASE_REQUEST_STATE_FINAL ); diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 423567a..0bb1da8 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -336,32 +336,32 @@ extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substat * * This macro will return the controller for this io request object */ -#define scic_sds_request_get_controller(this_request) \ - ((this_request)->owning_controller) +#define scic_sds_request_get_controller(sci_req) \ + ((sci_req)->owning_controller) /** * scic_sds_request_get_device() - * * This macro will return the device for this io request object */ -#define scic_sds_request_get_device(this_request) \ - ((this_request)->target_device) +#define scic_sds_request_get_device(sci_req) \ + ((sci_req)->target_device) /** * scic_sds_request_get_port() - * * This macro will return the port for this io request object */ -#define scic_sds_request_get_port(this_request) \ - scic_sds_remote_device_get_port(scic_sds_request_get_device(this_request)) +#define scic_sds_request_get_port(sci_req) \ + scic_sds_remote_device_get_port(scic_sds_request_get_device(sci_req)) /** * scic_sds_request_get_post_context() - * * This macro returns the constructed post context result for the io request. */ -#define scic_sds_request_get_post_context(this_request) \ - ((this_request)->post_context) +#define scic_sds_request_get_post_context(sci_req) \ + ((sci_req)->post_context) /** * scic_sds_request_get_task_context() - @@ -433,41 +433,41 @@ scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completi * ***************************************************************************** */ void scic_sds_request_build_sgl( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); void scic_sds_stp_request_assign_buffers( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); void scic_sds_smp_request_assign_buffers( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); /* --------------------------------------------------------------------------- */ enum sci_status scic_sds_request_start( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_terminate( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_complete( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); void scic_sds_io_request_copy_response( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_event_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 event_code); enum sci_status scic_sds_io_request_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 frame_index); enum sci_status scic_sds_task_request_terminate( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); /* * ***************************************************************************** @@ -475,10 +475,10 @@ enum sci_status scic_sds_task_request_terminate( * ***************************************************************************** */ enum sci_status scic_sds_request_started_state_abort_handler( - struct scic_sds_request *request); + struct scic_sds_request *sci_req); enum sci_status scic_sds_request_started_state_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code); #endif /* _SCIC_SDS_IO_REQUEST_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index 88c3595..471cb7d 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -142,15 +142,15 @@ scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( struct scic_sds_request *request) { enum sci_status status; - struct scic_sds_request *the_request; + struct scic_sds_request *sci_req; - the_request = (struct scic_sds_request *)request; + sci_req = (struct scic_sds_request *)request; - status = scic_sds_io_request_complete(the_request); + status = scic_sds_io_request_complete(sci_req); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( - device->owning_port, device, the_request); + device->owning_port, device, sci_req); if (status == SCI_SUCCESS) { scic_sds_remote_device_decrement_request_count(device); @@ -165,7 +165,7 @@ scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( "failed with status %d.\n", __func__, device, - the_request, + sci_req, device->owning_port, status); } @@ -175,13 +175,13 @@ scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( /** * This is frame handler for smp device ready cmd substate. - * @this_device: This is the device object that is receiving the frame. + * @sci_dev: This is the device object that is receiving the frame. * @frame_index: The index for the frame received. * * enum sci_status */ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index) { enum sci_status status; @@ -191,7 +191,7 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl * / in this state. All unsolicited frames are forwarded to the io request * / object. */ status = scic_sds_io_request_frame_handler( - this_device->working_request, + sci_dev->working_request, frame_index ); diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 70bc8d2..f53f21b 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -67,7 +67,7 @@ #include "scu_task_context.h" static void scu_smp_request_construct_task_context( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, struct smp_request *smp_request); /** @@ -118,27 +118,27 @@ u32 scic_sds_smp_request_get_object_size(void) /** * This method build the remainder of the IO request object. - * @this_request: This parameter specifies the request object being constructed. + * @sci_req: This parameter specifies the request object being constructed. * * The scic_sds_general_request_construct() must be called before this call is * valid. none */ void scic_sds_smp_request_assign_buffers( - struct scic_sds_request *this_request) + struct scic_sds_request *sci_req) { /* Assign all of the buffer pointers */ - this_request->command_buffer = - scic_sds_smp_request_get_command_buffer(this_request); - this_request->response_buffer = - scic_sds_smp_request_get_response_buffer(this_request); - this_request->sgl_element_pair_buffer = NULL; - - if (this_request->was_tag_assigned_by_user == false) { - this_request->task_context_buffer = - scic_sds_smp_request_get_task_context_buffer(this_request); - this_request->task_context_buffer = - PTR_ALIGN(this_request->task_context_buffer, SMP_CACHE_BYTES); + sci_req->command_buffer = + scic_sds_smp_request_get_command_buffer(sci_req); + sci_req->response_buffer = + scic_sds_smp_request_get_response_buffer(sci_req); + sci_req->sgl_element_pair_buffer = NULL; + + if (sci_req->was_tag_assigned_by_user == false) { + sci_req->task_context_buffer = + scic_sds_smp_request_get_task_context_buffer(sci_req); + sci_req->task_context_buffer = + PTR_ALIGN(sci_req->task_context_buffer, SMP_CACHE_BYTES); } } @@ -163,7 +163,7 @@ void scic_sds_smp_request_assign_buffers( * (i.e. non-raw frame) is being utilized to perform task management. -# * control_frame == 1. This ensures that the proper endianess is set so * that the bytes are transmitted in the right order for a smp request frame. - * @this_request: This parameter specifies the smp request object being + * @sci_req: This parameter specifies the smp request object being * constructed. * */ @@ -295,7 +295,7 @@ static void scu_smp_request_construct_task_context( * for a response frame. It will copy the response data, release the * unsolicited frame, and transition the request to the * SCI_BASE_REQUEST_STATE_COMPLETED state. - * @this_request: This parameter specifies the request for which the + * @sci_req: This parameter specifies the request for which the * unsolicited frame was received. * @frame_index: This parameter indicates the unsolicited frame index that * should contain the response. @@ -305,16 +305,16 @@ static void scu_smp_request_construct_task_context( * indicates successful processing of the TC response. */ static enum sci_status scic_sds_smp_request_await_response_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; void *frame_header; - struct smp_response_header *this_frame_header; - u8 *user_smp_buffer = this_request->response_buffer; + struct smp_response_header *rsp_hdr; + u8 *user_smp_buffer = sci_req->response_buffer; status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_request_get_controller(this_request)->uf_control), + &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, &frame_header ); @@ -325,13 +325,13 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( frame_header, sizeof(struct smp_response_header) / sizeof(u32) ); - this_frame_header = (struct smp_response_header *)user_smp_buffer; + rsp_hdr = (struct smp_response_header *)user_smp_buffer; - if (this_frame_header->smp_frame_type == SMP_FRAME_TYPE_RESPONSE) { + if (rsp_hdr->smp_frame_type == SMP_FRAME_TYPE_RESPONSE) { void *smp_response_buffer; status = scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_request_get_controller(this_request)->uf_control), + &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, &smp_response_buffer ); @@ -341,23 +341,23 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( smp_response_buffer, sizeof(union smp_response_body) / sizeof(u32) ); - if (this_frame_header->function == SMP_FUNCTION_DISCOVER) { - struct smp_response *this_smp_response; + if (rsp_hdr->function == SMP_FUNCTION_DISCOVER) { + struct smp_response *smp_resp; - this_smp_response = (struct smp_response *)user_smp_buffer; + smp_resp = (struct smp_response *)user_smp_buffer; /* * Some expanders only report an attached SATA device, and * not an STP target. Since the core depends on the STP * target attribute to correctly build I/O, set the bit now * if necessary. */ - if (this_smp_response->response.discover.protocols.u.bits.attached_sata_device - && !this_smp_response->response.discover.protocols.u.bits.attached_stp_target) { - this_smp_response->response.discover.protocols.u.bits.attached_stp_target = 1; + if (smp_resp->response.discover.protocols.u.bits.attached_sata_device + && !smp_resp->response.discover.protocols.u.bits.attached_stp_target) { + smp_resp->response.discover.protocols.u.bits.attached_stp_target = 1; - dev_dbg(scic_to_dev(this_request->owning_controller), + dev_dbg(scic_to_dev(sci_req->owning_controller), "%s: scic_sds_smp_request_await_response_frame_handler(0x%p) Found SATA dev, setting STP bit.\n", - __func__, this_request); + __func__, sci_req); } } @@ -367,40 +367,40 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( /* * copy the smp response to framework smp request's response buffer. - * scic_sds_smp_request_copy_response(this_request); */ + * scic_sds_smp_request_copy_response(sci_req); */ scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION ); } else { /* This was not a response frame why did it get forwarded? */ - dev_err(scic_to_dev(this_request->owning_controller), + dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC SMP Request 0x%p received unexpected frame " "%d type 0x%02x\n", __func__, - this_request, + sci_req, frame_index, - this_frame_header->smp_frame_type); + rsp_hdr->smp_frame_type); scic_sds_request_set_status( - this_request, + sci_req, SCU_TASK_DONE_SMP_FRM_TYPE_ERR, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); sci_base_state_machine_change_state( - &this_request->state_machine, + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); } scic_sds_controller_release_frame( - this_request->owning_controller, frame_index + sci_req->owning_controller, frame_index ); return SCI_SUCCESS; @@ -411,7 +411,7 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( * This method processes an abnormal TC completion while the SMP request is * waiting for a response frame. It decides what happened to the IO based * on TC completion status. - * @this_request: This parameter specifies the request for which the TC + * @sci_req: This parameter specifies the request for which the TC * completion was received. * @completion_code: This parameter indicates the completion status information * for the TC. @@ -420,7 +420,7 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( * this method always returns success. */ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { @@ -429,11 +429,11 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler * In the AWAIT RESPONSE state, any TC completion is unexpected. * but if the TC has success status, we complete the IO anyway. */ scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->state_machine, + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; @@ -447,11 +447,11 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler * break the connection and set TC completion with one of these SMP_XXX_XX_ERR * status. For these type of error, we ask scic user to retry the request. */ scic_sds_request_set_status( - this_request, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED + sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED ); sci_base_state_machine_change_state( - &this_request->state_machine, + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; @@ -460,13 +460,13 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); sci_base_state_machine_change_state( - &this_request->state_machine, + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -480,7 +480,7 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler * determine if the SMP request was sent successfully. If the SMP request * was sent successfully, then the state for the SMP request transits to * waiting for a response frame. - * @this_request: This parameter specifies the request for which the TC + * @sci_req: This parameter specifies the request for which the TC * completion was received. * @completion_code: This parameter indicates the completion status information * for the TC. @@ -489,17 +489,17 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler * this method always returns success. */ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->state_machine, + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; @@ -508,13 +508,13 @@ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_ha * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); sci_base_state_machine_change_state( - &this_request->state_machine, + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -547,10 +547,10 @@ static const struct scic_sds_io_request_state_handler scic_sds_smp_request_start static void scic_sds_smp_request_started_await_response_substate_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_smp_request_started_substate_handler_table, SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE ); @@ -568,10 +568,10 @@ static void scic_sds_smp_request_started_await_response_substate_enter( static void scic_sds_smp_request_started_await_tc_completion_substate_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_smp_request_started_substate_handler_table, SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION ); diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.h b/drivers/scsi/isci/core/scic_sds_smp_request.h index bcad282c..8f34ffe 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.h +++ b/drivers/scsi/isci/core/scic_sds_smp_request.h @@ -62,8 +62,7 @@ u32 scic_sds_smp_request_get_object_size(void); -void scic_sds_smp_request_copy_response( - struct scic_sds_request *this_request); +void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); #endif /* _SCIC_SDS_SMP_REQUEST_T_ */ diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index 4d3a21b..0367668 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -67,7 +67,7 @@ * determine if the RAW task management frame was sent successfully. If the * raw frame was sent successfully, then the state for the task request * transitions to waiting for a response frame. - * @this_request: This parameter specifies the request for which the TC + * @sci_req: This parameter specifies the request for which the TC * completion was received. * @completion_code: This parameter indicates the completion status information * for the TC. @@ -76,17 +76,17 @@ * this method always returns success. */ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE ); break; @@ -97,15 +97,15 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi * timeout if the task IU wasn't received successfully. * There is a potential for receiving multiple task responses if we * decide to send the task IU again. */ - dev_warn(scic_to_dev(this_request->owning_controller), + dev_warn(scic_to_dev(sci_req->owning_controller), "%s: TaskRequest:0x%p CompletionCode:%x - " "ACK/NAK timeout\n", __func__, - this_request, + sci_req, completion_code); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE ); break; @@ -115,12 +115,12 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); - sci_base_state_machine_change_state(&this_request->state_machine, + sci_base_state_machine_change_state(&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -132,7 +132,7 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi * This method is responsible for processing a terminate/abort request for this * TC while the request is waiting for the task management response * unsolicited frame. - * @this_request: This parameter specifies the request for which the + * @sci_req: This parameter specifies the request for which the * termination was requested. * * This method returns an indication as to whether the abort request was @@ -155,7 +155,7 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler * waiting for a response frame. It will copy the response data, release * the unsolicited frame, and transition the request to the * SCI_BASE_REQUEST_STATE_COMPLETED state. - * @this_request: This parameter specifies the request for which the + * @sci_req: This parameter specifies the request for which the * unsolicited frame was received. * @frame_index: This parameter indicates the unsolicited frame index that * should contain the response. @@ -202,10 +202,10 @@ static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_ static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_ssp_task_request_started_substate_handler_table, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION ); @@ -223,10 +223,10 @@ static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_e static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_ssp_task_request_started_substate_handler_table, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE ); diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c index 25c68ce..e4d2bf5 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c @@ -75,16 +75,16 @@ /** * This method will fill in the SCU Task Context for a PACKET fis. And * construct the request STARTED sub-state machine for Packet Protocol IO. - * @this_request: This parameter specifies the stp packet request object being + * @sci_req: This parameter specifies the stp packet request object being * constructed. * */ enum sci_status scic_sds_stp_packet_request_construct( - struct scic_sds_request *this_request) + struct scic_sds_request *sci_req) { struct sata_fis_reg_h2d *h2d_fis = scic_stp_io_request_get_h2d_reg_address( - this_request + sci_req ); /* @@ -92,17 +92,17 @@ enum sci_status scic_sds_stp_packet_request_construct( * need to make change to Packet Fis features field. */ h2d_fis->features = h2d_fis->features | ATA_PACKET_FEATURE_DMA; - scic_sds_stp_non_ncq_request_construct(this_request); + scic_sds_stp_non_ncq_request_construct(sci_req); /* Build the Packet Fis task context structure */ scu_stp_raw_request_construct_task_context( - (struct scic_sds_stp_request *)this_request, - this_request->task_context_buffer + (struct scic_sds_stp_request *)sci_req, + sci_req->task_context_buffer ); sci_base_state_machine_construct( - &this_request->started_substate_machine, - &this_request->parent.parent, + &sci_req->started_substate_machine, + &sci_req->parent.parent, scic_sds_stp_packet_request_started_substate_table, SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE ); @@ -119,24 +119,24 @@ enum sci_status scic_sds_stp_packet_request_construct( * utilized to perform task management. -# control_frame == 1. This ensures * that the proper endianess is set so that the bytes are transmitted in the * right order for a smp request frame. - * @this_request: This parameter specifies the smp request object being + * @sci_req: This parameter specifies the smp request object being * constructed. * @task_context: The task_context to be reconstruct for packet request command * phase. * */ void scu_stp_packet_request_command_phase_construct_task_context( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, struct scu_task_context *task_context) { void *atapi_cdb; u32 atapi_cdb_length; - struct scic_sds_stp_request *stp_request = (struct scic_sds_stp_request *)this_request; + struct scic_sds_stp_request *stp_request = (struct scic_sds_stp_request *)sci_req; /* * reference: SSTL 1.13.4.2 * task_type, sata_direction */ - if (scic_cb_io_request_get_data_direction(this_request->user_request) + if (scic_cb_io_request_get_data_direction(sci_req->user_request) == SCI_IO_REQUEST_DATA_OUT) { task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_OUT; task_context->sata_direction = 0; @@ -152,15 +152,15 @@ void scu_stp_packet_request_command_phase_construct_task_context( /* * Copy in the command IU with CDB so that the commandIU address doesn't * change. */ - memset(this_request->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); + memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); atapi_cdb = - scic_cb_stp_packet_io_request_get_cdb_address(this_request->user_request); + scic_cb_stp_packet_io_request_get_cdb_address(sci_req->user_request); atapi_cdb_length = - scic_cb_stp_packet_io_request_get_cdb_length(this_request->user_request); + scic_cb_stp_packet_io_request_get_cdb_length(sci_req->user_request); - memcpy(((u8 *)this_request->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); + memcpy(((u8 *)sci_req->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); atapi_cdb_length = max(atapi_cdb_length, stp_request->type.packet.device_preferred_cdb_length); @@ -175,18 +175,18 @@ void scu_stp_packet_request_command_phase_construct_task_context( /* retry counter */ task_context->stp_retry_count = 0; - if (scic_cb_request_is_initial_construction(this_request->user_request)) { + if (scic_cb_request_is_initial_construction(sci_req->user_request)) { /* data transfer size. */ task_context->transfer_length_bytes = - scic_cb_io_request_get_transfer_length(this_request->user_request); + scic_cb_io_request_get_transfer_length(sci_req->user_request); /* setup sgl */ - scic_sds_request_build_sgl(this_request); + scic_sds_request_build_sgl(sci_req); } else { /* data transfer size, need to be 4 bytes aligned. */ task_context->transfer_length_bytes = (SCSI_FIXED_SENSE_DATA_BASE_LENGTH + 2); - scic_sds_stp_packet_internal_request_sense_build_sgl(this_request); + scic_sds_stp_packet_internal_request_sense_build_sgl(sci_req); } } @@ -194,24 +194,24 @@ void scu_stp_packet_request_command_phase_construct_task_context( * This method will fill in the SCU Task Context for a DATA fis containing CDB * in Raw Frame type. The TC for previous Packet fis was already there, we * only need to change the H2D fis content. - * @this_request: This parameter specifies the smp request object being + * @sci_req: This parameter specifies the smp request object being * constructed. * @task_context: The task_context to be reconstruct for packet request command * phase. * */ void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, struct scu_task_context *task_context) { void *atapi_cdb = - scic_cb_stp_packet_io_request_get_cdb_address(this_request->user_request); + scic_cb_stp_packet_io_request_get_cdb_address(sci_req->user_request); u32 atapi_cdb_length = - scic_cb_stp_packet_io_request_get_cdb_length(this_request->user_request); + scic_cb_stp_packet_io_request_get_cdb_length(sci_req->user_request); - memset(this_request->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); - memcpy(((u8 *)this_request->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); + memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); + memcpy(((u8 *)sci_req->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context)); task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; @@ -227,12 +227,12 @@ void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( * *@brief This methods decode the D2H status FIS and retrieve the sense data, * then pass the sense data to user request. * - ***@param[in] this_request The request receive D2H status FIS. + ***@param[in] sci_req The request receive D2H status FIS. ***@param[in] status_fis The D2H status fis to be processed. * */ enum sci_status scic_sds_stp_packet_request_process_status_fis( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, struct sata_fis_reg_d2h *status_fis) { enum sci_status status = SCI_SUCCESS; @@ -249,7 +249,7 @@ enum sci_status scic_sds_stp_packet_request_process_status_fis( * command using this request response buffer, only one sge is * needed. * - ***@param[in] this_request The request receive request sense data. + ***@param[in] sci_req The request receive request sense data. * */ void scic_sds_stp_packet_internal_request_sense_build_sgl( @@ -284,7 +284,7 @@ void scic_sds_stp_packet_internal_request_sense_build_sgl( * determine if the Packet FIS was sent successfully. If the Packet FIS was * sent successfully, then the state for the Packet request transits to * waiting for a PIO SETUP frame. - * @this_request: This parameter specifies the request for which the TC + * @sci_req: This parameter specifies the request for which the TC * completion was received. * @completion_code: This parameter indicates the completion status information * for the TC. @@ -293,7 +293,7 @@ void scic_sds_stp_packet_internal_request_sense_build_sgl( * this method always returns success. */ enum sci_status scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { enum sci_status status = SCI_SUCCESS; @@ -301,11 +301,11 @@ enum sci_status scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE ); break; @@ -315,13 +315,13 @@ enum sci_status scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_ * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); break; @@ -336,7 +336,7 @@ enum sci_status scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_ * waiting for a PIO SETUP FIS. It will release the unsolicited frame, and * transition the request to the COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE * state. - * @this_request: This parameter specifies the request for which the + * @sci_req: This parameter specifies the request for which the * unsolicited frame was received. * @frame_index: This parameter indicates the unsolicited frame index that * should contain the response. @@ -352,12 +352,12 @@ enum sci_status scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_h enum sci_status status; struct sata_fis_header *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *this_request; + struct scic_sds_stp_request *sci_req; - this_request = (struct scic_sds_stp_request *)request; + sci_req = (struct scic_sds_stp_request *)request; status = scic_sds_unsolicited_frame_control_get_header( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_header ); @@ -369,7 +369,7 @@ enum sci_status scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_h * Get from the frame buffer the PIO Setup Data, although we don't need * any info from this pio setup fis. */ scic_sds_unsolicited_frame_control_get_buffer( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_buffer ); @@ -378,23 +378,23 @@ enum sci_status scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_h * Get the data from the PIO Setup * The SCU Hardware returns first word in the frame_header and the rest * of the data is in the frame buffer so we need to back up one dword */ - this_request->type.packet.device_preferred_cdb_length = + sci_req->type.packet.device_preferred_cdb_length = (u16)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->transfter_count; /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame( - this_request->parent.owning_controller, frame_index + sci_req->parent.owning_controller, frame_index ); sci_base_state_machine_change_state( - &this_request->parent.started_substate_machine, + &sci_req->parent.started_substate_machine, SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE ); } else dev_err(scic_to_dev(request->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, this_request, frame_index, status); + __func__, sci_req, frame_index, status); return status; } @@ -406,7 +406,7 @@ enum sci_status scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_h * successfully, then the state for the packet request transits to COMPLETE * state. If not successfuly, the request transits to * COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE. - * @this_request: This parameter specifies the request for which the TC + * @sci_req: This parameter specifies the request for which the TC * completion was received. * @completion_code: This parameter indicates the completion status information * for the TC. @@ -415,64 +415,64 @@ enum sci_status scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_h * this method always returns success. */ enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { enum sci_status status = SCI_SUCCESS; u8 sat_packet_protocol = - scic_cb_request_get_sat_protocol(this_request->user_request); + scic_cb_request_get_sat_protocol(sci_req->user_request); switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); if (sat_packet_protocol == SAT_PROTOCOL_PACKET_DMA_DATA_IN || sat_packet_protocol == SAT_PROTOCOL_PACKET_DMA_DATA_OUT ) sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); else sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE ); break; case (SCU_TASK_DONE_UNEXP_FIS << SCU_COMPLETION_TL_STATUS_SHIFT): - if (scic_io_request_get_number_of_bytes_transferred(this_request) < - scic_cb_io_request_get_transfer_length(this_request->user_request)) { + if (scic_io_request_get_number_of_bytes_transferred(sci_req) < + scic_cb_io_request_get_transfer_length(sci_req->user_request)) { scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); - status = this_request->sci_status; + status = sci_req->sci_status; } break; case (SCU_TASK_DONE_EXCESS_DATA << SCU_COMPLETION_TL_STATUS_SHIFT): /* In this case, there is no UF coming after. compelte the IO now. */ scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); break; default: - if (this_request->sci_status != SCI_SUCCESS) { /* The io status was set already. This means an UF for the status + if (sci_req->sci_status != SCI_SUCCESS) { /* The io status was set already. This means an UF for the status * fis was received already. */ @@ -480,28 +480,28 @@ enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_tc * A device suspension event is expected, we need to have the device * coming out of suspension, then complete the IO. */ sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE ); /* change the device state to ATAPI_ERROR. */ sci_base_state_machine_change_state( - &this_request->target_device->ready_substate_machine, + &sci_req->target_device->ready_substate_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR ); - status = this_request->sci_status; + status = sci_req->sci_status; } else { /* If receiving any non-sucess TC status, no UF received yet, then an UF for * the status fis is coming after. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE ); } @@ -514,7 +514,7 @@ enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_tc /** * This method processes an unsolicited frame. - * @this_request: This parameter specifies the request for which the + * @sci_req: This parameter specifies the request for which the * unsolicited frame was received. * @frame_index: This parameter indicates the unsolicited frame index that * should contain the response. @@ -530,12 +530,12 @@ enum sci_status scic_sds_stp_packet_request_command_phase_common_frame_handler( enum sci_status status; struct sata_fis_header *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *this_request; + struct scic_sds_stp_request *sci_req; - this_request = (struct scic_sds_stp_request *)request; + sci_req = (struct scic_sds_stp_request *)request; status = scic_sds_unsolicited_frame_control_get_header( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_header ); @@ -547,18 +547,18 @@ enum sci_status scic_sds_stp_packet_request_command_phase_common_frame_handler( * Get from the frame buffer the PIO Setup Data, although we don't need * any info from this pio setup fis. */ scic_sds_unsolicited_frame_control_get_buffer( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_buffer ); scic_sds_controller_copy_sata_response( - &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer + &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer ); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame( - this_request->parent.owning_controller, frame_index + sci_req->parent.owning_controller, frame_index ); } @@ -568,7 +568,7 @@ enum sci_status scic_sds_stp_packet_request_command_phase_common_frame_handler( /** * This method processes an unsolicited frame while the packet request is * expecting TC completion. It will process the FIS and construct sense data. - * @this_request: This parameter specifies the request for which the + * @sci_req: This parameter specifies the request for which the * unsolicited frame was received. * @frame_index: This parameter indicates the unsolicited frame index that * should contain the response. @@ -581,7 +581,7 @@ enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_fr struct scic_sds_request *request, u32 frame_index) { - struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; enum sci_status status = scic_sds_stp_packet_request_command_phase_common_frame_handler( @@ -590,17 +590,17 @@ enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_fr if (status == SCI_SUCCESS) { /* The command has completed with error status from target device. */ status = scic_sds_stp_packet_request_process_status_fis( - request, &this_request->d2h_reg_fis); + request, &sci_req->d2h_reg_fis); if (status != SCI_SUCCESS) { scic_sds_request_set_status( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, status ); } else scic_sds_request_set_status( - &this_request->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS + &sci_req->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); } @@ -611,7 +611,7 @@ enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_fr /** * This method processes an unsolicited frame while the packet request is * expecting TC completion. It will process the FIS and construct sense data. - * @this_request: This parameter specifies the request for which the + * @sci_req: This parameter specifies the request for which the * unsolicited frame was received. * @frame_index: This parameter indicates the unsolicited frame index that * should contain the response. @@ -628,12 +628,12 @@ enum sci_status scic_sds_stp_packet_request_command_phase_await_d2h_fis_frame_ha scic_sds_stp_packet_request_command_phase_common_frame_handler( request, frame_index); - struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; if (status == SCI_SUCCESS) { /* The command has completed with error status from target device. */ status = scic_sds_stp_packet_request_process_status_fis( - request, &this_request->d2h_reg_fis); + request, &sci_req->d2h_reg_fis); if (status != SCI_SUCCESS) { scic_sds_request_set_status( @@ -696,26 +696,26 @@ const struct scic_sds_io_request_state_handler scic_sds_stp_packet_request_start void scic_sds_stp_packet_request_started_packet_phase_await_tc_completion_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_packet_request_started_substate_handler_table, SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE ); scic_sds_remote_device_set_working_request( - this_request->target_device, this_request + sci_req->target_device, sci_req ); } void scic_sds_stp_packet_request_started_packet_phase_await_pio_setup_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_packet_request_started_substate_handler_table, SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE ); @@ -724,9 +724,9 @@ void scic_sds_stp_packet_request_started_packet_phase_await_pio_setup_enter( void scic_sds_stp_packet_request_started_command_phase_await_tc_completion_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; u8 sat_packet_protocol = - scic_cb_request_get_sat_protocol(this_request->user_request); + scic_cb_request_get_sat_protocol(sci_req->user_request); struct scu_task_context *task_context; enum sci_status status; @@ -735,25 +735,25 @@ void scic_sds_stp_packet_request_started_command_phase_await_tc_completion_enter * Recycle the TC and reconstruct it for sending out data fis containing * CDB. */ task_context = scic_sds_controller_get_task_context_buffer( - this_request->owning_controller, this_request->io_tag); + sci_req->owning_controller, sci_req->io_tag); if (sat_packet_protocol == SAT_PROTOCOL_PACKET_NON_DATA) scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( - this_request, task_context); + sci_req, task_context); else scu_stp_packet_request_command_phase_construct_task_context( - this_request, task_context); + sci_req, task_context); /* send the new TC out. */ - status = this_request->owning_controller->state_handlers->parent.continue_io_handler( - &this_request->owning_controller->parent, - &this_request->target_device->parent, - &this_request->parent + status = sci_req->owning_controller->state_handlers->parent.continue_io_handler( + &sci_req->owning_controller->parent, + &sci_req->target_device->parent, + &sci_req->parent ); if (status == SCI_SUCCESS) SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_packet_request_started_substate_handler_table, SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE ); @@ -762,10 +762,10 @@ void scic_sds_stp_packet_request_started_command_phase_await_tc_completion_enter void scic_sds_stp_packet_request_started_command_phase_await_d2h_fis_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_packet_request_started_substate_handler_table, SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE ); @@ -774,10 +774,10 @@ void scic_sds_stp_packet_request_started_command_phase_await_d2h_fis_enter( void scic_sds_stp_packet_request_started_completion_delay_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_packet_request_started_substate_handler_table, SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE ); diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h index eebfff3..f6ff5a6 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h @@ -113,14 +113,14 @@ extern const struct scic_sds_io_request_state_handler scic_sds_stp_packet_reques #if !defined(DISABLE_ATAPI) enum sci_status scic_sds_stp_packet_request_construct( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); #else /* !defined(DISABLE_ATAPI) */ #define scic_sds_stp_packet_request_construct(request) SCI_FAILURE #endif /* !defined(DISABLE_ATAPI) */ #if !defined(DISABLE_ATAPI) void scu_stp_packet_request_command_phase_construct_task_context( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, struct scu_task_context *task_context); #else /* !defined(DISABLE_ATAPI) */ #define scu_stp_packet_request_command_phase_construct_task_context(reqeust, tc) @@ -128,7 +128,7 @@ void scu_stp_packet_request_command_phase_construct_task_context( #if !defined(DISABLE_ATAPI) void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, struct scu_task_context *task_context); #else /* !defined(DISABLE_ATAPI) */ #define scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context(reqeust, tc) @@ -136,7 +136,7 @@ void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( #if !defined(DISABLE_ATAPI) enum sci_status scic_sds_stp_packet_request_process_status_fis( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, struct sata_fis_reg_d2h *status_fis); #else /* !defined(DISABLE_ATAPI) */ #define scic_sds_stp_packet_request_process_status_fis(reqeust, fis) SCI_FAILURE @@ -144,7 +144,7 @@ enum sci_status scic_sds_stp_packet_request_process_status_fis( #if !defined(DISABLE_ATAPI) void scic_sds_stp_packet_internal_request_sense_build_sgl( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); #else /* !defined(DISABLE_ATAPI) */ #define scic_sds_stp_packet_internal_request_sense_build_sgl(request) #endif /* !defined(DISABLE_ATAPI) */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index a5b1fe3..b15357b 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -252,18 +252,18 @@ out: * resume the RNC right away. enum sci_status */ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code) { enum sci_status status; - status = scic_sds_remote_device_general_event_handler(this_device, event_code); + status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); if (status == SCI_SUCCESS) { if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { status = scic_sds_remote_node_context_resume( - this_device->rnc, NULL, NULL); + sci_dev->rnc, NULL, NULL); } } @@ -312,21 +312,21 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_ha /** * This method will handle events received while the STP device is in the ready * command substate. - * @this_device: This is the device object that is receiving the event. + * @sci_dev: This is the device object that is receiving the event. * @event_code: The event code to process. * * enum sci_status */ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index) { enum sci_status status; struct sata_fis_header *frame_header; status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_remote_device_get_controller(this_device)->uf_control), + &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), frame_index, (void **)&frame_header ); @@ -334,7 +334,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl if (status == SCI_SUCCESS) { if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS && (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { - this_device->not_ready_reason = + sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; /* @@ -343,7 +343,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl */ sci_base_state_machine_change_state( - &this_device->ready_substate_machine, + &sci_dev->ready_substate_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR ); } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H && @@ -353,11 +353,11 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl * Some devices return D2H FIS when an NCQ error is detected. * Treat this like an SDB error FIS ready reason. */ - this_device->not_ready_reason = + sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; sci_base_state_machine_change_state( - &this_device->ready_substate_machine, + &sci_dev->ready_substate_machine, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR ); } else { @@ -365,7 +365,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl } scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(this_device), frame_index + scic_sds_remote_device_get_controller(sci_dev), frame_index ); } @@ -393,20 +393,20 @@ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_ha } static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 suspend_type) { enum sci_status status; status = scic_sds_remote_node_context_suspend( - this_device->rnc, suspend_type, NULL, NULL + sci_dev->rnc, suspend_type, NULL, NULL ); return status; } static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 frame_index) { enum sci_status status; @@ -416,7 +416,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handl * / in this state. All unsolicited frames are forwarded to the io request * / object. */ status = scic_sds_io_request_frame_handler( - this_device->working_request, + sci_dev->working_request, frame_index ); @@ -461,14 +461,14 @@ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_com struct scic_sds_remote_device *device, struct scic_sds_request *request) { - struct scic_sds_request *the_request = (struct scic_sds_request *)request; + struct scic_sds_request *sci_req = (struct scic_sds_request *)request; enum sci_status status; - status = scic_sds_io_request_complete(the_request); + status = scic_sds_io_request_complete(sci_req); if (status == SCI_SUCCESS) { status = scic_sds_port_complete_io( - device->owning_port, device, the_request + device->owning_port, device, sci_req ); if (status == SCI_SUCCESS) @@ -482,7 +482,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_com __func__, device->owning_port, device, - the_request, + sci_req, status); return status; @@ -505,20 +505,20 @@ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_com * this device. enum sci_status */ enum sci_status scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler( - struct scic_sds_remote_device *this_device, + struct scic_sds_remote_device *sci_dev, u32 event_code) { enum sci_status status; - status = scic_sds_remote_device_general_event_handler(this_device, event_code); + status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); if (status == SCI_SUCCESS) { if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { status = scic_sds_remote_node_context_resume( - this_device->rnc, - this_device->working_request->state_handlers->parent.complete_handler, - (void *)this_device->working_request + sci_dev->rnc, + sci_dev->working_request->state_handlers->parent.complete_handler, + (void *)sci_dev->working_request ); } } @@ -673,30 +673,30 @@ scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *use static void scic_sds_stp_remote_device_ready_idle_substate_enter( struct sci_base_object *device) { - struct scic_sds_remote_device *this_device; + struct scic_sds_remote_device *sci_dev; - this_device = (struct scic_sds_remote_device *)device; + sci_dev = (struct scic_sds_remote_device *)device; SET_STATE_HANDLER( - this_device, + sci_dev, scic_sds_stp_remote_device_ready_substate_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE ); - this_device->working_request = NULL; + sci_dev->working_request = NULL; - if (scic_sds_remote_node_context_is_ready(this_device->rnc)) { + if (scic_sds_remote_node_context_is_ready(sci_dev->rnc)) { /* * Since the RNC is ready, it's alright to finish completion * processing (e.g. signal the remote device is ready). */ scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( - this_device + sci_dev ); } else { scic_sds_remote_node_context_resume( - this_device->rnc, + sci_dev->rnc, scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, - this_device + sci_dev ); } } @@ -759,12 +759,12 @@ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci static void scic_sds_stp_remote_device_ready_await_reset_substate_enter( struct sci_base_object *device) { - struct scic_sds_remote_device *this_device; + struct scic_sds_remote_device *sci_dev; - this_device = (struct scic_sds_remote_device *)device; + sci_dev = (struct scic_sds_remote_device *)device; SET_STATE_HANDLER( - this_device, + sci_dev, scic_sds_stp_remote_device_ready_substate_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET ); @@ -785,12 +785,12 @@ static void scic_sds_stp_remote_device_ready_await_reset_substate_enter( void scic_sds_stp_remote_device_ready_atapi_error_substate_enter( struct sci_base_object *device) { - struct scic_sds_remote_device *this_device; + struct scic_sds_remote_device *sci_dev; - this_device = (struct scic_sds_remote_device *)device; + sci_dev = (struct scic_sds_remote_device *)device; SET_STATE_HANDLER( - this_device, + sci_dev, scic_sds_stp_remote_device_ready_substate_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR ); diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index e4ca4e4..ab01f8d 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -156,7 +156,7 @@ void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) /** * This method is will fill in the SCU Task Context for any type of SATA * request. This is called from the various SATA constructors. - * @this_request: The general IO request object which is to be used in + * @sci_req: The general IO request object which is to be used in * constructing the SCU task context. * @task_context: The buffer pointer for the SCU task context which is being * constructed. @@ -262,15 +262,15 @@ static void scu_sata_reqeust_construct_task_context( /** * - * @this_request: + * @sci_req: * * This method will perform any general sata request construction. What part of * SATA IO request construction is general? none */ static void scic_sds_stp_non_ncq_request_construct( - struct scic_sds_request *this_request) + struct scic_sds_request *sci_req) { - this_request->has_started_substate_machine = true; + sci_req->has_started_substate_machine = true; } /** @@ -338,7 +338,7 @@ enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_ /** * scu_stp_raw_request_construct_task_context - - * @this_request: This parameter specifies the STP request object for which to + * @sci_req: This parameter specifies the STP request object for which to * construct a RAW command frame task context. * @task_context: This parameter specifies the SCU specific task context buffer * to construct. @@ -347,10 +347,10 @@ enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_ * utilizing the raw frame method. none */ static void scu_stp_raw_request_construct_task_context( - struct scic_sds_stp_request *this_request, + struct scic_sds_stp_request *sci_req, struct scu_task_context *task_context) { - scu_sata_reqeust_construct_task_context(&this_request->parent, task_context); + scu_sata_reqeust_construct_task_context(&sci_req->parent, task_context); task_context->control_frame = 0; task_context->priority = SCU_TASK_PRIORITY_NORMAL; @@ -386,7 +386,7 @@ void *scic_stp_io_request_get_d2h_reg_address( /** * - * @this_request: + * @sci_req: * * Get the next SGL element from the request. - Check on which SGL element pair * we are working - if working on SLG pair element A - advance to element B - @@ -430,7 +430,7 @@ static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic /** * - * @this_request: + * @sci_req: * @completion_code: * * This method processes a TC completion. The expected TC completion is for @@ -439,17 +439,17 @@ static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic * SCI_SUCCESS This value is always returned. */ static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE ); break; @@ -459,13 +459,13 @@ static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_han * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); sci_base_state_machine_change_state( - &this_request->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -491,10 +491,10 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( enum sci_status status; struct sata_fis_header *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; status = scic_sds_unsolicited_frame_control_get_header( - &this_request->parent.owning_controller->uf_control, + &sci_req->parent.owning_controller->uf_control, frame_index, (void **)&frame_header ); @@ -503,18 +503,18 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( switch (frame_header->fis_type) { case SATA_FIS_TYPE_REGD2H: scic_sds_unsolicited_frame_control_get_buffer( - &this_request->parent.owning_controller->uf_control, + &sci_req->parent.owning_controller->uf_control, frame_index, (void **)&frame_buffer ); scic_sds_controller_copy_sata_response( - &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer + &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer ); /* The command has completed with error */ scic_sds_request_set_status( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); @@ -524,10 +524,10 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( dev_warn(scic_to_dev(request->owning_controller), "%s: IO Request:0x%p Frame Id:%d protocol " "violation occurred\n", - __func__, this_request, frame_index); + __func__, sci_req, frame_index); scic_sds_request_set_status( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_UNEXP_FIS, SCI_FAILURE_PROTOCOL_VIOLATION ); @@ -535,18 +535,18 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( } sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame( - this_request->parent.owning_controller, frame_index); + sci_req->parent.owning_controller, frame_index); } else dev_err(scic_to_dev(request->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, this_request, frame_index, status); + __func__, sci_req, frame_index, status); return status; } @@ -567,26 +567,26 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_non_data_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE ); scic_sds_remote_device_set_working_request( - this_request->target_device, this_request + sci_req->target_device, sci_req ); } static void scic_sds_stp_request_started_non_data_await_d2h_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_non_data_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE ); @@ -624,7 +624,7 @@ enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request /** * - * @this_request: + * @sci_req: * @length: * * This function will transmit DATA_FIS from (current sgl + offset) for input @@ -633,24 +633,24 @@ enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request */ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 length) { - struct scic_sds_stp_request *this_sds_stp_request = (struct scic_sds_stp_request *)this_request; + struct scic_sds_stp_request *stp_req = (struct scic_sds_stp_request *)sci_req; struct scu_sgl_element *current_sgl; /* * Recycle the TC and reconstruct it for sending out DATA FIS containing * for the data from current_sgl+offset for the input length */ struct scu_task_context *task_context = scic_sds_controller_get_task_context_buffer( - this_request->owning_controller, - this_request->io_tag + sci_req->owning_controller, + sci_req->io_tag ); - if (this_sds_stp_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) - current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->A); + if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) + current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); else - current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->B); + current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); /* update the TC */ task_context->command_iu_upper = current_sgl->address_upper; @@ -659,17 +659,17 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; /* send the new TC out. */ - return scic_controller_continue_io(this_request); + return scic_controller_continue_io(sci_req); } /** * - * @this_request: + * @sci_req: * * enum sci_status */ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data( - struct scic_sds_request *this_sds_request) + struct scic_sds_request *sci_req) { struct scu_sgl_element *current_sgl; @@ -677,45 +677,45 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data( u32 remaining_bytes_in_current_sgl = 0; enum sci_status status = SCI_SUCCESS; - struct scic_sds_stp_request *this_sds_stp_request = (struct scic_sds_stp_request *)this_sds_request; + struct scic_sds_stp_request *stp_req = (struct scic_sds_stp_request *)sci_req; - sgl_offset = this_sds_stp_request->type.pio.request_current.sgl_offset; + sgl_offset = stp_req->type.pio.request_current.sgl_offset; - if (this_sds_stp_request->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->A); - remaining_bytes_in_current_sgl = this_sds_stp_request->type.pio.request_current.sgl_pair->A.length - sgl_offset; + if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); + remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset; } else { - current_sgl = &(this_sds_stp_request->type.pio.request_current.sgl_pair->B); - remaining_bytes_in_current_sgl = this_sds_stp_request->type.pio.request_current.sgl_pair->B.length - sgl_offset; + current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); + remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset; } - if (this_sds_stp_request->type.pio.pio_transfer_bytes > 0) { - if (this_sds_stp_request->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { + if (stp_req->type.pio.pio_transfer_bytes > 0) { + if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ - status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(this_sds_request, remaining_bytes_in_current_sgl); + status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl); if (status == SCI_SUCCESS) { - this_sds_stp_request->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; + stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; /* update the current sgl, sgl_offset and save for future */ - current_sgl = scic_sds_stp_request_pio_get_next_sgl(this_sds_stp_request); + current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req); sgl_offset = 0; } - } else if (this_sds_stp_request->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { + } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */ - scic_sds_stp_request_pio_data_out_trasmit_data_frame(this_sds_request, this_sds_stp_request->type.pio.pio_transfer_bytes); + scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes); if (status == SCI_SUCCESS) { /* Sgl offset will be adjusted and saved for future */ - sgl_offset += this_sds_stp_request->type.pio.pio_transfer_bytes; - current_sgl->address_lower += this_sds_stp_request->type.pio.pio_transfer_bytes; - this_sds_stp_request->type.pio.pio_transfer_bytes = 0; + sgl_offset += stp_req->type.pio.pio_transfer_bytes; + current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes; + stp_req->type.pio.pio_transfer_bytes = 0; } } } if (status == SCI_SUCCESS) { - this_sds_stp_request->type.pio.request_current.sgl_offset = sgl_offset; + stp_req->type.pio.request_current.sgl_offset = sgl_offset; } return status; @@ -772,13 +772,13 @@ scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *s /** * - * @this_request: The PIO DATA IN request that is to receive the data. + * @sci_req: The PIO DATA IN request that is to receive the data. * @data_buffer: The buffer to copy from. * * Copy the data buffer to the io request data region. enum sci_status */ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( - struct scic_sds_stp_request *this_request, + struct scic_sds_stp_request *sci_req, u8 *data_buffer) { enum sci_status status; @@ -786,19 +786,19 @@ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( /* * If there is less than 1K remaining in the transfer request * copy just the data for the transfer */ - if (this_request->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { + if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { status = scic_sds_stp_request_pio_data_in_copy_data_buffer( - this_request, data_buffer, this_request->type.pio.pio_transfer_bytes); + sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes); if (status == SCI_SUCCESS) - this_request->type.pio.pio_transfer_bytes = 0; + sci_req->type.pio.pio_transfer_bytes = 0; } else { /* We are transfering the whole frame so copy */ status = scic_sds_stp_request_pio_data_in_copy_data_buffer( - this_request, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); + sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); if (status == SCI_SUCCESS) - this_request->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; + sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; } return status; @@ -806,13 +806,13 @@ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( /** * - * @this_request: + * @sci_req: * @completion_code: * * enum sci_status */ static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { enum sci_status status = SCI_SUCCESS; @@ -820,11 +820,11 @@ static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completi switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE ); break; @@ -834,13 +834,13 @@ static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completi * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); sci_base_state_machine_change_state( - &this_request->state_machine, + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); break; @@ -851,7 +851,7 @@ static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completi /** * - * @this_request: + * @sci_req: * @frame_index: * * enum sci_status @@ -863,12 +863,12 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( enum sci_status status; struct sata_fis_header *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *this_request; + struct scic_sds_stp_request *sci_req; - this_request = (struct scic_sds_stp_request *)request; + sci_req = (struct scic_sds_stp_request *)request; status = scic_sds_unsolicited_frame_control_get_header( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_header ); @@ -878,7 +878,7 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( case SATA_FIS_TYPE_PIO_SETUP: /* Get from the frame buffer the PIO Setup Data */ scic_sds_unsolicited_frame_control_get_buffer( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_buffer ); @@ -887,30 +887,30 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( * Get the data from the PIO Setup * The SCU Hardware returns first word in the frame_header and the rest * of the data is in the frame buffer so we need to back up one dword */ - this_request->type.pio.pio_transfer_bytes = + sci_req->type.pio.pio_transfer_bytes = (u16)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->transfter_count; - this_request->type.pio.ending_status = + sci_req->type.pio.ending_status = (u8)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->ending_status; scic_sds_controller_copy_sata_response( - &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer + &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer ); - this_request->d2h_reg_fis.status = - this_request->type.pio.ending_status; + sci_req->d2h_reg_fis.status = + sci_req->type.pio.ending_status; /* The next state is dependent on whether the request was PIO Data-in or Data out */ - if (this_request->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_IN) { + if (sci_req->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_IN) { sci_base_state_machine_change_state( - &this_request->parent.started_substate_machine, + &sci_req->parent.started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE ); - } else if (this_request->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_OUT) { + } else if (sci_req->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_OUT) { /* Transmit data */ status = scic_sds_stp_request_pio_data_out_transmit_data(request); if (status == SCI_SUCCESS) { sci_base_state_machine_change_state( - &this_request->parent.started_substate_machine, + &sci_req->parent.started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE ); } @@ -919,7 +919,7 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( case SATA_FIS_TYPE_SETDEVBITS: sci_base_state_machine_change_state( - &this_request->parent.started_substate_machine, + &sci_req->parent.started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE ); break; @@ -927,22 +927,22 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( case SATA_FIS_TYPE_REGD2H: if ((frame_header->status & ATA_STATUS_REG_BSY_BIT) == 0) { scic_sds_unsolicited_frame_control_get_buffer( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_buffer ); scic_sds_controller_copy_sata_response( - &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer); + &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer); scic_sds_request_set_status( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); } else { @@ -954,7 +954,7 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( "D2H Register FIS with BSY status " "0x%x\n", __func__, - this_request, + sci_req, frame_header->status); } break; @@ -965,21 +965,21 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( /* Frame is decoded return it to the controller */ scic_sds_controller_release_frame( - this_request->parent.owning_controller, + sci_req->parent.owning_controller, frame_index ); } else dev_err(scic_to_dev(request->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, this_request, frame_index, status); + __func__, sci_req, frame_index, status); return status; } /** * - * @this_request: + * @sci_req: * @frame_index: * * enum sci_status @@ -991,33 +991,33 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler enum sci_status status; struct sata_fis_header *frame_header; struct sata_fis_data *frame_buffer; - struct scic_sds_stp_request *this_request; + struct scic_sds_stp_request *sci_req; - this_request = (struct scic_sds_stp_request *)request; + sci_req = (struct scic_sds_stp_request *)request; status = scic_sds_unsolicited_frame_control_get_header( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_header ); if (status == SCI_SUCCESS) { if (frame_header->fis_type == SATA_FIS_TYPE_DATA) { - if (this_request->type.pio.request_current.sgl_pair == NULL) { - this_request->parent.saved_rx_frame_index = frame_index; - this_request->type.pio.pio_transfer_bytes = 0; + if (sci_req->type.pio.request_current.sgl_pair == NULL) { + sci_req->parent.saved_rx_frame_index = frame_index; + sci_req->type.pio.pio_transfer_bytes = 0; } else { status = scic_sds_unsolicited_frame_control_get_buffer( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_buffer ); - status = scic_sds_stp_request_pio_data_in_copy_data(this_request, (u8 *)frame_buffer); + status = scic_sds_stp_request_pio_data_in_copy_data(sci_req, (u8 *)frame_buffer); /* Frame is decoded return it to the controller */ scic_sds_controller_release_frame( - this_request->parent.owning_controller, + sci_req->parent.owning_controller, frame_index ); } @@ -1027,17 +1027,17 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler * for this data transfer */ if ( (status == SCI_SUCCESS) - && (this_request->type.pio.pio_transfer_bytes == 0) + && (sci_req->type.pio.pio_transfer_bytes == 0) ) { - if ((this_request->type.pio.ending_status & ATA_STATUS_REG_BSY_BIT) == 0) { + if ((sci_req->type.pio.ending_status & ATA_STATUS_REG_BSY_BIT) == 0) { scic_sds_request_set_status( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); } else { @@ -1053,24 +1053,24 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler "with fis type 0x%02x when expecting a data " "fis.\n", __func__, - this_request, + sci_req, frame_index, frame_header->fis_type); scic_sds_request_set_status( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_GOOD, SCI_FAILURE_IO_REQUIRES_SCSI_ABORT ); sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); /* Frame is decoded return it to the controller */ scic_sds_controller_release_frame( - this_request->parent.owning_controller, + sci_req->parent.owning_controller, frame_index ); } @@ -1078,7 +1078,7 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler dev_err(scic_to_dev(request->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, this_request, frame_index, status); + __func__, sci_req, frame_index, status); return status; } @@ -1086,31 +1086,31 @@ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler /** * - * @this_request: + * @sci_req: * @completion_code: * * enum sci_status */ static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { enum sci_status status = SCI_SUCCESS; bool all_frames_transferred = false; - struct scic_sds_stp_request *this_scic_sds_stp_request = (struct scic_sds_stp_request *)this_request; + struct scic_sds_stp_request *stp_req = (struct scic_sds_stp_request *)sci_req; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): /* Transmit data */ - if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes != 0) { - status = scic_sds_stp_request_pio_data_out_transmit_data(this_request); + if (stp_req->type.pio.pio_transfer_bytes != 0) { + status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); if (status == SCI_SUCCESS) { - if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes == 0) + if (stp_req->type.pio.pio_transfer_bytes == 0) all_frames_transferred = true; } - } else if (this_scic_sds_stp_request->type.pio.pio_transfer_bytes == 0) { + } else if (stp_req->type.pio.pio_transfer_bytes == 0) { /* * this will happen if the all data is written at the * first time after the pio setup fis is received @@ -1124,7 +1124,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_com * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE * and wait for PIO_SETUP fis / or D2H REg fis. */ sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE ); } @@ -1135,13 +1135,13 @@ static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_com * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); sci_base_state_machine_change_state( - &this_request->state_machine, + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED ); break; @@ -1217,25 +1217,25 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_pio_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE ); scic_sds_remote_device_set_working_request( - this_request->target_device, this_request); + sci_req->target_device, sci_req); } static void scic_sds_stp_request_started_pio_await_frame_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_pio_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE ); @@ -1244,10 +1244,10 @@ static void scic_sds_stp_request_started_pio_await_frame_enter( static void scic_sds_stp_request_started_pio_data_in_await_data_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_pio_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE ); @@ -1256,10 +1256,10 @@ static void scic_sds_stp_request_started_pio_data_in_await_data_enter( static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_pio_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE ); @@ -1333,13 +1333,13 @@ static void scic_sds_stp_request_udma_complete_request( /** * - * @this_request: + * @sci_req: * @frame_index: * * enum sci_status */ static enum sci_status scic_sds_stp_request_udma_general_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; @@ -1347,7 +1347,7 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler( u32 *frame_buffer; status = scic_sds_unsolicited_frame_control_get_header( - &this_request->owning_controller->uf_control, + &sci_req->owning_controller->uf_control, frame_index, (void **)&frame_header ); @@ -1357,20 +1357,20 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler( && (frame_header->fis_type == SATA_FIS_TYPE_REGD2H) ) { scic_sds_unsolicited_frame_control_get_buffer( - &this_request->owning_controller->uf_control, + &sci_req->owning_controller->uf_control, frame_index, (void **)&frame_buffer ); scic_sds_controller_copy_sata_response( - &((struct scic_sds_stp_request *)this_request)->d2h_reg_fis, + &((struct scic_sds_stp_request *)sci_req)->d2h_reg_fis, (u32 *)frame_header, frame_buffer ); } scic_sds_controller_release_frame( - this_request->owning_controller, frame_index); + sci_req->owning_controller, frame_index); return status; } @@ -1378,7 +1378,7 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler( /** * This method process TC completions while in the state where we are waiting * for TC completions. - * @this_request: + * @sci_req: * @completion_code: * * enum sci_status @@ -1388,12 +1388,12 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi u32 completion_code) { enum sci_status status = SCI_SUCCESS; - struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_stp_request_udma_complete_request( - &this_request->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS + &sci_req->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); break; @@ -1402,14 +1402,14 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi /* * We must check ther response buffer to see if the D2H Register FIS was * received before we got the TC completion. */ - if (this_request->d2h_reg_fis.fis_type == SATA_FIS_TYPE_REGD2H) { + if (sci_req->d2h_reg_fis.fis_type == SATA_FIS_TYPE_REGD2H) { scic_sds_remote_device_suspend( - this_request->parent.target_device, + sci_req->parent.target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)) ); scic_sds_stp_request_udma_complete_request( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); @@ -1418,7 +1418,7 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi * If we have an error completion status for the TC then we can expect a * D2H register FIS from the device so we must change state to wait for it */ sci_base_state_machine_change_state( - &this_request->parent.started_substate_machine, + &sci_req->parent.started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE ); } @@ -1434,14 +1434,14 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): scic_sds_remote_device_suspend( - this_request->parent.target_device, + sci_req->parent.target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)) ); /* Fall through to the default case */ default: /* All other completion status cause the IO to be complete. */ scic_sds_stp_request_udma_complete_request( - &this_request->parent, + &sci_req->parent, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); @@ -1452,17 +1452,17 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi } static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; /* Use the general frame handler to copy the resposne data */ - status = scic_sds_stp_request_udma_general_frame_handler(this_request, frame_index); + status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); if (status == SCI_SUCCESS) { scic_sds_stp_request_udma_complete_request( - this_request, + sci_req, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); @@ -1488,10 +1488,10 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start static void scic_sds_stp_request_started_udma_await_tc_completion_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_udma_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE ); @@ -1507,10 +1507,10 @@ static void scic_sds_stp_request_started_udma_await_tc_completion_enter( static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_udma_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE ); @@ -1548,7 +1548,7 @@ enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci /** * - * @this_request: + * @sci_req: * @completion_code: * * This method processes a TC completion. The expected TC completion is for @@ -1557,17 +1557,17 @@ enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci * SCI_SUCCESS This value is always returned. */ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE ); break; @@ -1577,13 +1577,13 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_com * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); sci_base_state_machine_change_state( - &this_request->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -1592,7 +1592,7 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_com /** * - * @this_request: + * @sci_req: * @completion_code: * * This method processes a TC completion. The expected TC completion is for @@ -1601,17 +1601,17 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_com * SCI_SUCCESS This value is always returned. */ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status( - this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS ); sci_base_state_machine_change_state( - &this_request->started_substate_machine, + &sci_req->started_substate_machine, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE ); break; @@ -1621,12 +1621,12 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_c * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ scic_sds_request_set_status( - this_request, + sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); - sci_base_state_machine_change_state(&this_request->state_machine, + sci_base_state_machine_change_state(&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -1653,10 +1653,10 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( enum sci_status status; struct sata_fis_header *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *this_request = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; status = scic_sds_unsolicited_frame_control_get_header( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_header ); @@ -1665,18 +1665,18 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( switch (frame_header->fis_type) { case SATA_FIS_TYPE_REGD2H: scic_sds_unsolicited_frame_control_get_buffer( - &(this_request->parent.owning_controller->uf_control), + &(sci_req->parent.owning_controller->uf_control), frame_index, (void **)&frame_buffer ); scic_sds_controller_copy_sata_response( - &this_request->d2h_reg_fis, (u32 *)frame_header, frame_buffer + &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer ); /* The command has completed with error */ scic_sds_request_set_status( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID ); @@ -1687,11 +1687,11 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( "%s: IO Request:0x%p Frame Id:%d protocol " "violation occurred\n", __func__, - this_request, + sci_req, frame_index); scic_sds_request_set_status( - &this_request->parent, + &sci_req->parent, SCU_TASK_DONE_UNEXP_FIS, SCI_FAILURE_PROTOCOL_VIOLATION ); @@ -1699,18 +1699,18 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( } sci_base_state_machine_change_state( - &this_request->parent.state_machine, + &sci_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame( - this_request->parent.owning_controller, frame_index + sci_req->parent.owning_controller, frame_index ); } else dev_err(scic_to_dev(request->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, this_request, frame_index, status); + __func__, sci_req, frame_index, status); return status; } @@ -1735,40 +1735,40 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_soft_reset_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE ); scic_sds_remote_device_set_working_request( - this_request->target_device, this_request + sci_req->target_device, sci_req ); } static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; struct scu_task_context *task_context; struct sata_fis_reg_h2d *h2d_fis; enum sci_status status; /* Clear the SRST bit */ - h2d_fis = scic_stp_io_request_get_h2d_reg_address(this_request); + h2d_fis = scic_stp_io_request_get_h2d_reg_address(sci_req); h2d_fis->control = 0; /* Clear the TC control bit */ task_context = scic_sds_controller_get_task_context_buffer( - this_request->owning_controller, this_request->io_tag); + sci_req->owning_controller, sci_req->io_tag); task_context->control_frame = 0; - status = scic_controller_continue_io(this_request); + status = scic_controller_continue_io(sci_req); if (status == SCI_SUCCESS) { SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_soft_reset_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE ); @@ -1778,10 +1778,10 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( struct sci_base_object *object) { - struct scic_sds_request *this_request = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = (struct scic_sds_request *)object; SET_STATE_HANDLER( - this_request, + sci_req, scic_sds_stp_request_started_soft_reset_substate_handler_table, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE ); diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index a6c02d3..6724c1d 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -177,18 +177,18 @@ enum sci_status scic_sds_stp_pio_request_construct( bool copy_rx_frame); enum sci_status scic_sds_stp_udma_request_construct( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 transfer_length, enum dma_data_direction dir); enum sci_status scic_sds_stp_non_data_request_construct( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); enum sci_status scic_sds_stp_soft_reset_request_construct( - struct scic_sds_request *this_request); + struct scic_sds_request *sci_req); enum sci_status scic_sds_stp_ncq_request_construct( - struct scic_sds_request *this_request, + struct scic_sds_request *sci_req, u32 transfer_length, enum dma_data_direction dir); -- cgit v0.10.2 From 31e824ed0d8c84c5232405167b2338ffc071ae8a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 19 Apr 2011 12:32:51 -0700 Subject: isci: rely on irq core for intx multiplexing, and silence screaming intx Remove the extra logic to poll each controller for interrupts, that's the core's job for shared interrupts. While testing noticed that a number of interrupts fire while waiting for the completion tasklet to run, so added an irq-ack. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 927f088..0d706b2 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -77,23 +77,19 @@ irqreturn_t isci_msix_isr(int vec, void *data) irqreturn_t isci_intx_isr(int vec, void *data) { - struct pci_dev *pdev = data; - struct isci_host *ihost; irqreturn_t ret = IRQ_NONE; - int i; + struct isci_host *ihost = data; + struct scic_sds_controller *scic = ihost->core_controller; - for_each_isci_host(i, ihost, pdev) { - struct scic_sds_controller *scic = ihost->core_controller; - - if (scic_sds_controller_isr(scic)) { - tasklet_schedule(&ihost->completion_tasklet); - ret = IRQ_HANDLED; - } else if (scic_sds_controller_error_isr(scic)) { - spin_lock(&ihost->scic_lock); - scic_sds_controller_error_handler(scic); - spin_unlock(&ihost->scic_lock); - ret = IRQ_HANDLED; - } + if (scic_sds_controller_isr(scic)) { + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); + tasklet_schedule(&ihost->completion_tasklet); + ret = IRQ_HANDLED; + } else if (scic_sds_controller_error_isr(scic)) { + spin_lock(&ihost->scic_lock); + scic_sds_controller_error_handler(scic); + spin_unlock(&ihost->scic_lock); + ret = IRQ_HANDLED; } return ret; diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 015ce94..5a9cd5f 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -335,6 +335,7 @@ static int num_controllers(struct pci_dev *pdev) static int isci_setup_interrupts(struct pci_dev *pdev) { int err, i, num_msix; + struct isci_host *ihost; struct isci_pci_info *pci_info = to_pci_info(pdev); /* @@ -353,9 +354,9 @@ static int isci_setup_interrupts(struct pci_dev *pdev) for (i = 0; i < num_msix; i++) { int id = i / SCI_NUM_MSI_X_INT; struct msix_entry *msix = &pci_info->msix_entries[i]; - struct isci_host *isci_host = pci_info->hosts[id]; irq_handler_t isr; + ihost = pci_info->hosts[id]; /* odd numbered vectors are error interrupts */ if (i & 1) isr = isci_error_isr; @@ -363,16 +364,16 @@ static int isci_setup_interrupts(struct pci_dev *pdev) isr = isci_msix_isr; err = devm_request_irq(&pdev->dev, msix->vector, isr, 0, - DRV_NAME"-msix", isci_host); + DRV_NAME"-msix", ihost); if (!err) continue; dev_info(&pdev->dev, "msix setup failed falling back to intx\n"); while (i--) { id = i / SCI_NUM_MSI_X_INT; - isci_host = pci_info->hosts[id]; + ihost = pci_info->hosts[id]; msix = &pci_info->msix_entries[i]; - devm_free_irq(&pdev->dev, msix->vector, isci_host); + devm_free_irq(&pdev->dev, msix->vector, ihost); } pci_disable_msix(pdev); goto intx; @@ -380,8 +381,12 @@ static int isci_setup_interrupts(struct pci_dev *pdev) return 0; intx: - err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr, - IRQF_SHARED, DRV_NAME"-intx", pdev); + for_each_isci_host(i, ihost, pdev) { + err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr, + IRQF_SHARED, DRV_NAME"-intx", ihost); + if (err) + break; + } return err; } -- cgit v0.10.2 From 7ab92c9ed22b49a50d9a10bbfdf4ee8ffe62c324 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 19 Apr 2011 13:48:49 -0700 Subject: isci: make a remote_node_context a proper member of a remote_device A rnc object has the same lifetime as its associated remote_device. It might get re-initialized, but a remote device always has an rnc member. Preparation for unifying scic_sds_remote_device and isci_remote_device Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index fa7828d..0429527 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -83,8 +83,7 @@ u32 scic_remote_device_get_object_size(void) { - return sizeof(struct scic_sds_remote_device) - + sizeof(struct scic_sds_remote_node_context); + return sizeof (struct scic_sds_remote_device); } enum sci_status scic_remote_device_da_construct( @@ -111,7 +110,7 @@ enum sci_status scic_remote_device_da_construct( &remote_node_index); if (status == SCI_SUCCESS) { - sci_dev->rnc->remote_node_index = remote_node_index; + sci_dev->rnc.remote_node_index = remote_node_index; scic_sds_port_get_attached_sas_address( sci_dev->owning_port, &sci_dev->device_address); @@ -176,7 +175,7 @@ enum sci_status scic_remote_device_ea_construct( sci_dev, discover_response); status = scic_sds_controller_allocate_remote_node_context( - scic, sci_dev, &sci_dev->rnc->remote_node_index); + scic, sci_dev, &sci_dev->rnc.remote_node_index); if (status == SCI_SUCCESS) { if (sci_dev->target_protocols.u.bits.attached_ssp_target) { @@ -694,7 +693,7 @@ static enum sci_status scic_sds_remote_device_core_event_handler( case SCU_EVENT_TYPE_RNC_OPS_MISC: case SCU_EVENT_TYPE_RNC_SUSPEND_TX: case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - status = scic_sds_remote_node_context_event_handler(sci_dev->rnc, event_code); + status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); break; case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: @@ -702,7 +701,7 @@ static enum sci_status scic_sds_remote_device_core_event_handler( status = SCI_SUCCESS; /* Suspend the associated RNC */ - scic_sds_remote_node_context_suspend(sci_dev->rnc, + scic_sds_remote_node_context_suspend(&sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); @@ -889,7 +888,7 @@ static enum sci_status scic_sds_remote_device_stopped_state_start_handler( { enum sci_status status; - status = scic_sds_remote_node_context_resume(sci_dev->rnc, + status = scic_sds_remote_node_context_resume(&sci_dev->rnc, scic_sds_remote_device_resume_complete_handler, sci_dev); if (status == SCI_SUCCESS) @@ -923,8 +922,8 @@ static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( scic = scic_sds_remote_device_get_controller(sci_dev); scic_sds_controller_free_remote_node_context(scic, sci_dev, - sci_dev->rnc->remote_node_index); - sci_dev->rnc->remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + sci_dev->rnc.remote_node_index); + sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_FINAL); @@ -948,7 +947,7 @@ static enum sci_status scic_sds_remote_device_starting_state_stop_handler( /* * Destroy the remote node context */ - scic_sds_remote_node_context_destruct(sci_dev->rnc, + scic_sds_remote_node_context_destruct(&sci_dev->rnc, scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); /* @@ -971,7 +970,7 @@ enum sci_status scic_sds_remote_device_ready_state_stop_handler( SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); if (sci_dev->started_request_count == 0) { - scic_sds_remote_node_context_destruct(sci_dev->rnc, + scic_sds_remote_node_context_destruct(&sci_dev->rnc, scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); } else @@ -1016,8 +1015,8 @@ static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (result == SCI_SUCCESS) { - result = scic_sds_remote_node_context_start_task( - sci_dev->rnc, request); + result = scic_sds_remote_node_context_start_task(&sci_dev->rnc, + request); if (result == SCI_SUCCESS) result = scic_sds_request_start(request); @@ -1046,8 +1045,7 @@ static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( scic_sds_remote_device_get_port(sci_dev), sci_dev, request); if (result == SCI_SUCCESS) { - result = scic_sds_remote_node_context_start_io( - sci_dev->rnc, request); + result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); if (result == SCI_SUCCESS) result = scic_sds_request_start(request); @@ -1144,7 +1142,7 @@ static enum sci_status scic_sds_remote_device_stopping_state_complete_request_ha scic_sds_remote_device_decrement_request_count(sci_dev); if (scic_sds_remote_device_get_request_count(sci_dev) == 0) - scic_sds_remote_node_context_destruct(sci_dev->rnc, + scic_sds_remote_node_context_destruct(&sci_dev->rnc, scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); return SCI_SUCCESS; @@ -1491,7 +1489,7 @@ static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *obj scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_READY); - scic->remote_device_sequence[sci_dev->rnc->remote_node_index]++; + scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; if (sci_dev->has_ready_substate_machine) sci_base_state_machine_start(&sci_dev->ready_substate_machine); @@ -1585,7 +1583,7 @@ static void scic_sds_remote_device_resetting_state_enter( ); scic_sds_remote_node_context_suspend( - sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); + &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); } /** @@ -1601,7 +1599,7 @@ static void scic_sds_remote_device_resetting_state_exit( { struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - scic_sds_remote_node_context_resume(sci_dev->rnc, NULL, NULL); + scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); } /** @@ -1661,7 +1659,6 @@ void scic_remote_device_construct(struct scic_sds_port *sci_port, { sci_dev->owning_port = sci_port; sci_dev->started_request_count = 0; - sci_dev->rnc = (struct scic_sds_remote_node_context *) &sci_dev[1]; sci_dev->parent.private = NULL; sci_base_state_machine_construct( @@ -1677,9 +1674,9 @@ void scic_remote_device_construct(struct scic_sds_port *sci_port, scic_sds_remote_node_context_construct( sci_dev, - sci_dev->rnc, + &sci_dev->rnc, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX ); - sci_object_set_association(sci_dev->rnc, sci_dev); + sci_object_set_association(&sci_dev->rnc, sci_dev); } diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index 5d3df92..7f43f30 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -297,7 +297,7 @@ struct scic_sds_remote_device { * This field contains the SCU silicon remote node context specific * information. */ - struct scic_sds_remote_node_context *rnc; + struct scic_sds_remote_node_context rnc; /** * This field contains the stated request count for the remote device. The @@ -523,7 +523,7 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab #define scic_sds_remote_device_get_sequence(sci_dev) \ (\ scic_sds_remote_device_get_controller(sci_dev)-> \ - remote_device_sequence[(sci_dev)->rnc->remote_node_index] \ + remote_device_sequence[(sci_dev)->rnc.remote_node_index] \ ) /** @@ -554,7 +554,7 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab * This macro returns the remote node index for this device object */ #define scic_sds_remote_device_get_index(sci_dev) \ - ((sci_dev)->rnc->remote_node_index) + ((sci_dev)->rnc.remote_node_index) /** * scic_sds_remote_device_build_command_context() - diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 8a608f0..63ebbf3 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1766,7 +1766,7 @@ enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, scic_sds_general_request_construct(scic, sci_dev, io_tag, user_io_request_object, sci_req); - if (sci_dev->rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; scic_remote_device_get_protocols(sci_dev, &device_protocol); diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c index 471cb7d..cd55c0a 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c @@ -87,8 +87,7 @@ static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_h device->owning_port, device, request); if (status == SCI_SUCCESS) { - status = scic_sds_remote_node_context_start_io( - device->rnc, request); + status = scic_sds_remote_node_context_start_io(&device->rnc, request); if (status == SCI_SUCCESS) status = scic_sds_request_start(request); diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index f53f21b..3274d62 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -173,7 +173,7 @@ static void scu_smp_request_construct_task_context( { dma_addr_t dma_addr; struct scic_sds_controller *controller; - struct scic_sds_remote_device *target_device; + struct scic_sds_remote_device *sci_dev; struct scic_sds_port *target_port; struct scu_task_context *task_context; @@ -185,7 +185,7 @@ static void scu_smp_request_construct_task_context( task_context = scic_sds_request_get_task_context(sds_request); controller = scic_sds_request_get_controller(sds_request); - target_device = scic_sds_request_get_device(sds_request); + sci_dev = scic_sds_request_get_device(sds_request); target_port = scic_sds_request_get_port(sds_request); /* @@ -195,7 +195,7 @@ static void scu_smp_request_construct_task_context( task_context->priority = 0; task_context->initiator_request = 1; task_context->connection_rate = - scic_remote_device_get_connection_rate(target_device); + scic_remote_device_get_connection_rate(sci_dev); task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = @@ -206,8 +206,7 @@ static void scu_smp_request_construct_task_context( task_context->context_type = SCU_TASK_CONTEXT_TYPE; /* 04h */ - task_context->remote_node_index = - sds_request->target_device->rnc->remote_node_index; + task_context->remote_node_index = sci_dev->rnc.remote_node_index; task_context->command_code = 0; task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c index b15357b..848cb47 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c @@ -150,7 +150,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_h if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_task(device->rnc, request); + status = scic_sds_remote_node_context_start_task(&device->rnc, request); if (status != SCI_SUCCESS) goto out; @@ -173,9 +173,9 @@ static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_h * remote node context state machine will take the correct action when * the remote node context is suspended and later resumed. */ - scic_sds_remote_node_context_suspend(device->rnc, + scic_sds_remote_node_context_suspend(&device->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); - scic_sds_remote_node_context_resume(device->rnc, + scic_sds_remote_node_context_resume(&device->rnc, scic_sds_remote_device_continue_request, device); @@ -220,7 +220,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_h if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(sci_dev->rnc, request); + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); if (status != SCI_SUCCESS) goto out; @@ -263,7 +263,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_hand if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { status = scic_sds_remote_node_context_resume( - sci_dev->rnc, NULL, NULL); + &sci_dev->rnc, NULL, NULL); } } @@ -289,19 +289,16 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_ha sci_dev->owning_port, sci_dev, request); + if (status != SCI_SUCCESS) + return status; - if (status == SCI_SUCCESS) { - status = scic_sds_remote_node_context_start_io( - sci_dev->rnc, - request); + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); + if (status != SCI_SUCCESS) + return status; - if (status == SCI_SUCCESS) - status = request->state_handlers->start_handler(request); + status = request->state_handlers->start_handler(request); - scic_sds_remote_device_start_request(sci_dev, - request, - status); - } + scic_sds_remote_device_start_request(sci_dev, request, status); } else status = SCI_FAILURE_INVALID_STATE; @@ -398,9 +395,8 @@ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_han { enum sci_status status; - status = scic_sds_remote_node_context_suspend( - sci_dev->rnc, suspend_type, NULL, NULL - ); + status = scic_sds_remote_node_context_suspend(&sci_dev->rnc, + suspend_type, NULL, NULL); return status; } @@ -685,7 +681,7 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter( sci_dev->working_request = NULL; - if (scic_sds_remote_node_context_is_ready(sci_dev->rnc)) { + if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { /* * Since the RNC is ready, it's alright to finish completion * processing (e.g. signal the remote device is ready). */ @@ -694,10 +690,9 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter( ); } else { scic_sds_remote_node_context_resume( - sci_dev->rnc, + &sci_dev->rnc, scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, - sci_dev - ); + sci_dev); } } -- cgit v0.10.2 From 9614395ea2eed076fa8341df422582b0017d330c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 19 Apr 2011 18:35:58 -0700 Subject: isci: remove rnc->device back pointer Now that they are one in the same object remove the back pointer reference in favor of container_of. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 0429527..22788bf 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -1672,11 +1672,8 @@ void scic_remote_device_construct(struct scic_sds_port *sci_port, &sci_dev->state_machine ); - scic_sds_remote_node_context_construct( - sci_dev, - &sci_dev->rnc, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX - ); + scic_sds_remote_node_context_construct(&sci_dev->rnc, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); sci_object_set_association(&sci_dev->rnc, sci_dev); } diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h index 7f43f30..bff44b8 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ b/drivers/scsi/isci/core/scic_sds_remote_device.h @@ -339,6 +339,15 @@ struct scic_sds_remote_device { const struct scic_sds_remote_device_state_handler *state_handlers; }; +static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = container_of(rnc, typeof(*sci_dev), rnc); + + return sci_dev; +} + typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( struct scic_sds_remote_device *device, struct scic_sds_request *request); diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/core/scic_sds_remote_node_context.c index e329296..e1d58f88 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.c +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.c @@ -108,27 +108,24 @@ static void scic_sds_remote_node_context_construct_buffer( struct scic_sds_remote_node_context *sci_rnc) { union scu_remote_node_context *rnc; + struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); struct scic_sds_controller *scic; - scic = scic_sds_remote_device_get_controller(sci_rnc->device); + scic = scic_sds_remote_device_get_controller(sci_dev); rnc = scic_sds_controller_get_remote_node_context_buffer( scic, sci_rnc->remote_node_index); - memset( - rnc, - 0x00, - sizeof(union scu_remote_node_context) - * scic_sds_remote_device_node_count(sci_rnc->device) - ); + memset(rnc, 0, sizeof(union scu_remote_node_context) + * scic_sds_remote_device_node_count(sci_dev)); rnc->ssp.remote_node_index = sci_rnc->remote_node_index; - rnc->ssp.remote_node_port_width = sci_rnc->device->device_port_width; + rnc->ssp.remote_node_port_width = sci_dev->device_port_width; rnc->ssp.logical_port_index = - scic_sds_remote_device_get_port_index(sci_rnc->device); + scic_sds_remote_device_get_port_index(sci_dev); - rnc->ssp.remote_sas_address_hi = SCIC_SWAP_DWORD(sci_rnc->device->device_address.high); - rnc->ssp.remote_sas_address_lo = SCIC_SWAP_DWORD(sci_rnc->device->device_address.low); + rnc->ssp.remote_sas_address_hi = SCIC_SWAP_DWORD(sci_dev->device_address.high); + rnc->ssp.remote_sas_address_lo = SCIC_SWAP_DWORD(sci_dev->device_address.low); rnc->ssp.nexus_loss_timer_enable = true; rnc->ssp.check_bit = false; @@ -140,8 +137,8 @@ static void scic_sds_remote_node_context_construct_buffer( if ( - sci_rnc->device->target_protocols.u.bits.attached_sata_device - || sci_rnc->device->target_protocols.u.bits.attached_stp_target + sci_dev->target_protocols.u.bits.attached_sata_device + || sci_dev->target_protocols.u.bits.attached_stp_target ) { rnc->ssp.connection_occupancy_timeout = scic->user_parameters.sds1.stp_max_occupancy_timeout; @@ -157,7 +154,7 @@ static void scic_sds_remote_node_context_construct_buffer( rnc->ssp.initial_arbitration_wait_time = 0; /* Open Address Frame Parameters */ - rnc->ssp.oaf_connection_rate = sci_rnc->device->connection_rate; + rnc->ssp.oaf_connection_rate = sci_dev->connection_rate; rnc->ssp.oaf_features = 0; rnc->ssp.oaf_source_zone_group = 0; rnc->ssp.oaf_more_compatibility_features = 0; @@ -234,7 +231,7 @@ static enum sci_status scic_sds_remote_node_context_default_destruct_handler( scics_sds_remote_node_context_callback callback, void *callback_parameter) { - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to stop while " "in unexpected state %d\n", __func__, @@ -253,7 +250,7 @@ static enum sci_status scic_sds_remote_node_context_default_suspend_handler( scics_sds_remote_node_context_callback callback, void *callback_parameter) { - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to suspend " "while in wrong state %d\n", __func__, @@ -268,7 +265,7 @@ static enum sci_status scic_sds_remote_node_context_default_resume_handler( scics_sds_remote_node_context_callback callback, void *callback_parameter) { - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to resume " "while in wrong state %d\n", __func__, @@ -282,7 +279,7 @@ static enum sci_status scic_sds_remote_node_context_default_start_io_handler( struct scic_sds_remote_node_context *sci_rnc, struct scic_sds_request *sci_req) { - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to start io " "0x%p while in wrong state %d\n", __func__, @@ -297,7 +294,7 @@ static enum sci_status scic_sds_remote_node_context_default_start_task_handler( struct scic_sds_remote_node_context *sci_rnc, struct scic_sds_request *sci_req) { - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to start " "task 0x%p while in wrong state %d\n", __func__, @@ -312,7 +309,7 @@ static enum sci_status scic_sds_remote_node_context_default_event_handler( struct scic_sds_remote_node_context *sci_rnc, u32 event_code) { - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to process " "event 0x%x while in wrong state %d\n", __func__, @@ -412,7 +409,7 @@ static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( default: status = SCI_FAILURE; - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to " "process unexpected event 0x%x while in posting " "state\n", @@ -466,7 +463,7 @@ static enum sci_status scic_sds_remote_node_context_invalidating_state_event_han /* * We really dont care if the hardware is going to suspend * the device since it's being invalidated anyway */ - dev_dbg(scirdev_to_dev(sci_rnc->device), + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p was " "suspeneded by hardware while being " "invalidated.\n", @@ -476,7 +473,7 @@ static enum sci_status scic_sds_remote_node_context_invalidating_state_event_han break; default: - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p " "requested to process event 0x%x while " "in state %d.\n", @@ -516,7 +513,7 @@ static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler /* * We really dont care if the hardware is going to suspend * the device since it's being resumed anyway */ - dev_dbg(scirdev_to_dev(sci_rnc->device), + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p was " "suspeneded by hardware while being resumed.\n", __func__, @@ -525,7 +522,7 @@ static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler break; default: - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested " "to process event 0x%x while in state %d.\n", __func__, @@ -563,10 +560,8 @@ static enum sci_status scic_sds_remote_node_context_ready_state_suspend_handler( sci_rnc->suspension_code = suspend_type; if (suspend_type == SCI_SOFTWARE_SUSPENSION) { - scic_sds_remote_device_post_request( - sci_rnc->device, - SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX - ); + scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); } sci_base_state_machine_change_state( @@ -622,7 +617,7 @@ static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( break; default: - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to " "process event 0x%x while in state %d.\n", __func__, @@ -654,7 +649,7 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ - scic_remote_device_get_protocols(sci_rnc->device, &protocols); + scic_remote_device_get_protocols(rnc_to_dev(sci_rnc), &protocols); if ( (protocols.u.bits.attached_ssp_target == 1) @@ -667,7 +662,7 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha status = SCI_SUCCESS; } else if (protocols.u.bits.attached_stp_target == 1) { - if (sci_rnc->device->is_direct_attached) { + if (rnc_to_dev(sci_rnc)->is_direct_attached) { /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ sci_base_state_machine_change_state( &sci_rnc->state_machine, @@ -792,7 +787,7 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_event break; default: - dev_warn(scirdev_to_dev(sci_rnc->device), + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: SCIC Remote Node Context 0x%p requested to " "process event 0x%x while in state %d.\n", __func__, @@ -937,34 +932,26 @@ static void scic_sds_remote_node_context_continue_state_transitions( static void scic_sds_remote_node_context_validate_context_buffer( struct scic_sds_remote_node_context *sci_rnc) { + struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); union scu_remote_node_context *rnc_buffer; rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(sci_rnc->device), + scic_sds_remote_device_get_controller(sci_dev), sci_rnc->remote_node_index ); rnc_buffer->ssp.is_valid = true; - if ( - !sci_rnc->device->is_direct_attached - && sci_rnc->device->target_protocols.u.bits.attached_stp_target - ) { - scic_sds_remote_device_post_request( - sci_rnc->device, - SCU_CONTEXT_COMMAND_POST_RNC_96 - ); + if (!sci_dev->is_direct_attached && + sci_dev->target_protocols.u.bits.attached_stp_target) { + scic_sds_remote_device_post_request(sci_dev, + SCU_CONTEXT_COMMAND_POST_RNC_96); } else { - scic_sds_remote_device_post_request( - sci_rnc->device, - SCU_CONTEXT_COMMAND_POST_RNC_32 - ); + scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_32); - if (sci_rnc->device->is_direct_attached) { - scic_sds_port_setup_transports( - sci_rnc->device->owning_port, - sci_rnc->remote_node_index - ); + if (sci_dev->is_direct_attached) { + scic_sds_port_setup_transports(sci_dev->owning_port, + sci_rnc->remote_node_index); } } } @@ -981,16 +968,13 @@ static void scic_sds_remote_node_context_invalidate_context_buffer( union scu_remote_node_context *rnc_buffer; rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(sci_rnc->device), - sci_rnc->remote_node_index - ); + scic_sds_remote_device_get_controller(rnc_to_dev(sci_rnc)), + sci_rnc->remote_node_index); rnc_buffer->ssp.is_valid = false; - scic_sds_remote_device_post_request( - sci_rnc->device, - SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE - ); + scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); } /* @@ -1081,8 +1065,10 @@ static void scic_sds_remote_node_context_resuming_state_enter( { struct scic_sds_remote_node_context *rnc; struct smp_discover_response_protocols protocols; + struct scic_sds_remote_device *sci_dev; rnc = (struct scic_sds_remote_node_context *)object; + sci_dev = rnc_to_dev(rnc); SET_STATE_HANDLER( rnc, @@ -1096,18 +1082,15 @@ static void scic_sds_remote_node_context_resuming_state_enter( * resume because of a target reset we also need to update * the STPTLDARNI register with the RNi of the device */ - scic_remote_device_get_protocols(rnc->device, &protocols); + scic_remote_device_get_protocols(sci_dev, &protocols); - if ((protocols.u.bits.attached_stp_target == 1) && - (rnc->device->is_direct_attached)) { - scic_sds_port_setup_transports( - rnc->device->owning_port, rnc->remote_node_index); + if (protocols.u.bits.attached_stp_target == 1 && + sci_dev->is_direct_attached) { + scic_sds_port_setup_transports(sci_dev->owning_port, + rnc->remote_node_index); } - scic_sds_remote_device_post_request( - rnc->device, - SCU_CONTEXT_COMMAND_POST_RNC_RESUME - ); + scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); } /** @@ -1225,15 +1208,12 @@ static const struct sci_base_state scic_sds_remote_node_context_state_table[] = }, }; -void scic_sds_remote_node_context_construct( - struct scic_sds_remote_device *device, - struct scic_sds_remote_node_context *rnc, - u16 remote_node_index) +void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, + u16 remote_node_index) { memset(rnc, 0, sizeof(struct scic_sds_remote_node_context)); rnc->remote_node_index = remote_node_index; - rnc->device = device; rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; sci_base_state_machine_construct( diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h index a103f15..b3f2546 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ b/drivers/scsi/isci/core/scic_sds_remote_node_context.h @@ -232,15 +232,6 @@ struct scic_sds_remote_node_context { struct sci_base_object parent; /** - * This pointer simply points to the remote device object containing - * this RNC. - * - * @todo Consider making the device pointer the associated object of the - * the parent object. - */ - struct scic_sds_remote_device *device; - - /** * This field indicates the remote node index (RNI) associated with * this RNC. */ @@ -279,10 +270,8 @@ struct scic_sds_remote_node_context { struct scic_sds_remote_node_context_handlers *state_handlers; }; -void scic_sds_remote_node_context_construct( - struct scic_sds_remote_device *device, - struct scic_sds_remote_node_context *rnc, - u16 remote_node_index); +void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, + u16 remote_node_index); bool scic_sds_remote_node_context_is_ready( -- cgit v0.10.2 From 57f20f4ed6fb702339be2ef4dea9d15e6a7d0d07 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 21 Apr 2011 18:14:45 -0700 Subject: isci: unify remote_device data structures Make it explicit that isci_remote_device and scic_sds_remote_device are one in the same object. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_remote_device.h b/drivers/scsi/isci/core/scic_remote_device.h index 62fa7fd..23e90af 100644 --- a/drivers/scsi/isci/core/scic_remote_device.h +++ b/drivers/scsi/isci/core/scic_remote_device.h @@ -87,18 +87,6 @@ enum scic_remote_device_not_ready_reason_code { }; /** - * scic_remote_device_get_object_size() - This method simply returns the - * maximum memory space needed to store a remote device object. - * - * a positive integer value indicating the size (in bytes) of the remote device - * object. - */ -u32 scic_remote_device_get_object_size( - void); - -struct scic_sds_port; -struct scic_sds_remote_device; -/** * scic_remote_device_construct() - This method will perform the construction * common to all remote device objects. * @sci_port: SAS/SATA port through which this device is accessed. diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c index 22788bf..d314e2b 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ b/drivers/scsi/isci/core/scic_sds_remote_device.c @@ -71,21 +71,6 @@ #define SCIC_SDS_REMOTE_DEVICE_RESET_TIMEOUT (1000) -/* - * ***************************************************************************** - * * CORE REMOTE DEVICE PRIVATE METHODS - * ***************************************************************************** */ - -/* - * ***************************************************************************** - * * CORE REMOTE DEVICE PUBLIC METHODS - * ***************************************************************************** */ - -u32 scic_remote_device_get_object_size(void) -{ - return sizeof (struct scic_sds_remote_device); -} - enum sci_status scic_remote_device_da_construct( struct scic_sds_remote_device *sci_dev) { diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 0d706b2..3aceb92 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -467,7 +467,7 @@ int isci_host_init(struct isci_host *isci_host) isci_phy_init(&isci_host->phys[i], isci_host, i); for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { - struct isci_remote_device *idev = idev_by_id(isci_host, i); + struct isci_remote_device *idev = &isci_host->devices[i]; INIT_LIST_HEAD(&idev->reqs_in_process); INIT_LIST_HEAD(&idev->node); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 6e66074..21bd7d8 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -110,18 +110,9 @@ struct isci_host { struct list_head requests_to_errorback; spinlock_t scic_lock; - /* careful only access this via idev_by_id */ - struct isci_remote_device devices[0]; + struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES]; }; -static inline struct isci_remote_device *idev_by_id(struct isci_host *ihost, int i) -{ - void *p = ihost->devices; - - return p + i * (sizeof(struct isci_remote_device) + - scic_remote_device_get_object_size()); -} - /** * struct isci_pci_info - This class represents the pci function containing the * controllers. Depending on PCI SKU, there could be up to 2 controllers in diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 5a9cd5f..a23ea2c 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -396,10 +396,7 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) struct Scsi_Host *shost; int err; - isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host) + - SCI_MAX_REMOTE_DEVICES * - (sizeof(struct isci_remote_device) + - scic_remote_device_get_object_size()), GFP_KERNEL); + isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL); if (!isci_host) return NULL; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 9301e25..1553221 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -87,7 +87,7 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ BUG(); } - scic_remote_device_destruct(to_sci_dev(idev)); + scic_remote_device_destruct(&idev->sci); idev->domain_dev->lldd_dev = NULL; idev->domain_dev = NULL; idev->isci_port = NULL; @@ -117,7 +117,7 @@ static enum sci_status isci_remote_device_construct( /* let the core do it's common constuction. */ scic_remote_device_construct(port->sci_port_handle, - to_sci_dev(isci_device)); + &isci_device->sci); /* let the core do it's device specific constuction. */ if (isci_device->domain_dev->parent && @@ -183,11 +183,11 @@ static enum sci_status isci_remote_device_construct( "%s: parent->dev_type = EDGE_DEV\n", __func__); - status = scic_remote_device_ea_construct(to_sci_dev(isci_device), + status = scic_remote_device_ea_construct(&isci_device->sci, (struct smp_response_discover *)&discover_response); } else - status = scic_remote_device_da_construct(to_sci_dev(isci_device)); + status = scic_remote_device_da_construct(&isci_device->sci); if (status != SCI_SUCCESS) { @@ -200,10 +200,11 @@ static enum sci_status isci_remote_device_construct( return status; } - sci_object_set_association(to_sci_dev(isci_device), isci_device); + /* XXX will be killed with sci_base_object removal */ + sci_object_set_association(&isci_device->sci, isci_device); /* start the device. */ - status = scic_remote_device_start(to_sci_dev(isci_device), + status = scic_remote_device_start(&isci_device->sci, ISCI_REMOTE_DEVICE_START_TIMEOUT); if (status != SCI_SUCCESS) { @@ -245,7 +246,7 @@ isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) int i; for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { - idev = idev_by_id(ihost, i); + idev = &ihost->devices[i]; if (!test_and_set_bit(IDEV_ALLOCATED, &idev->flags)) break; } @@ -374,7 +375,7 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem set_bit(IDEV_STOP_PENDING, &idev->flags); spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_stop(to_sci_dev(idev), 50); + status = scic_remote_device_stop(&idev->sci, 50); spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the stop complete callback. */ diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 9925316..aeda395 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -55,9 +55,9 @@ #if !defined(_ISCI_REMOTE_DEVICE_H_) #define _ISCI_REMOTE_DEVICE_H_ +#include "scic_sds_remote_device.h" struct isci_host; -struct scic_sds_remote_device; struct isci_remote_device { enum isci_status status; @@ -70,14 +70,9 @@ struct isci_remote_device { struct list_head node; struct list_head reqs_in_process; spinlock_t state_lock; + struct scic_sds_remote_device sci; }; -static inline struct scic_sds_remote_device *to_sci_dev(struct isci_remote_device *idev) -{ - /* core data is an opaque buffer at the end of the idev */ - return (struct scic_sds_remote_device *) &idev[1]; -} - #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 void isci_remote_device_start_complete(struct isci_host *ihost, diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index a90c299..8d2125b 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -179,7 +179,7 @@ static enum sci_status isci_io_request_build( struct smp_discover_response_protocols dev_protocols; enum sci_status status = SCI_SUCCESS; struct sas_task *task = isci_request_access_task(request); - struct scic_sds_remote_device *sci_device = to_sci_dev(isci_device); + struct scic_sds_remote_device *sci_device = &isci_device->sci; dev_dbg(&isci_host->pdev->dev, "%s: isci_device = 0x%p; request = %p, " @@ -380,7 +380,7 @@ int isci_request_execute( unsigned long flags; isci_device = task->dev->lldd_dev; - sci_device = to_sci_dev(isci_device); + sci_device = &isci_device->sci; /* do common allocation and init of request object. */ ret = isci_request_alloc_io( @@ -1194,11 +1194,9 @@ void isci_request_io_request_complete( ); /* complete the io request to the core. */ - scic_controller_complete_io( - isci_host->core_controller, - to_sci_dev(isci_device), - request->sci_request_handle - ); + scic_controller_complete_io(isci_host->core_controller, + &isci_device->sci, + request->sci_request_handle); /* NULL the request handle so it cannot be completed or * terminated again, and to cause any calls into abort * task to recognize the already completed case. diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c79968d..f54f523 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -282,7 +282,7 @@ static enum sci_status isci_task_request_build( "%s: isci_tmf = %p\n", __func__, isci_tmf); isci_device = isci_tmf->device; - sci_device = to_sci_dev(isci_device); + sci_device = &isci_device->sci; /* do common allocation and init of request object. */ status = isci_request_alloc_tmf( @@ -390,7 +390,7 @@ static void isci_tmf_timeout_cb(void *tmf_request_arg) /* Terminate the TMF transmit request. */ status = scic_controller_terminate_request( request->isci_host->core_controller, - to_sci_dev(request->isci_device), + &request->isci_device->sci, request->sci_request_handle ); @@ -448,7 +448,7 @@ int isci_task_execute_tmf( "%s: isci_device = %p\n", __func__, isci_device); - sci_device = to_sci_dev(isci_device); + sci_device = &isci_device->sci; /* Assign the pointer to the TMF's completion kernel wait structure. */ tmf->complete = &completion; @@ -784,9 +784,8 @@ static void isci_terminate_request_core( needs_cleanup_handling = true; status = scic_controller_terminate_request( isci_host->core_controller, - to_sci_dev(isci_device), - isci_request->sci_request_handle - ); + &isci_device->sci, + isci_request->sci_request_handle); } spin_unlock_irqrestore(&isci_host->scic_lock, flags); @@ -1483,9 +1482,8 @@ void isci_task_request_complete( scic_controller_complete_io( isci_host->core_controller, - to_sci_dev(isci_device), - request->sci_request_handle - ); + &isci_device->sci, + request->sci_request_handle); /* NULL the request handle to make sure it cannot be terminated * or completed again. */ @@ -1611,7 +1609,7 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) } spin_lock_irqsave(&isci_host->scic_lock, flags); - status = scic_remote_device_reset(to_sci_dev(isci_dev)); + status = scic_remote_device_reset(&isci_dev->sci); if (status != SCI_SUCCESS) { spin_unlock_irqrestore(&isci_host->scic_lock, flags); @@ -1645,7 +1643,7 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) /* WHAT TO DO HERE IF sas_phy_reset FAILS? */ spin_lock_irqsave(&isci_host->scic_lock, flags); - status = scic_remote_device_reset_complete(to_sci_dev(isci_dev)); + status = scic_remote_device_reset_complete(&isci_dev->sci); spin_unlock_irqrestore(&isci_host->scic_lock, flags); if (status != SCI_SUCCESS) { -- cgit v0.10.2 From 88f3b62ac131e2549b6c262cacbd47e8cca42d6e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 22 Apr 2011 19:18:03 -0700 Subject: isci: move remote_device handling out of the core Now that the core/lldd remote_device data structures are nominally unified merge the corresponding sources into the top-level directory. Also move the remote_node_context infrastructure which has no analog at the lldd level. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 522e7a7..ccc8c53 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -10,20 +10,19 @@ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ remote_device.o port.o timers.o \ host.o task.o probe_roms.o \ + stp_remote_device.o \ + smp_remote_device.o \ + remote_node_context.o \ + remote_node_table.o \ core/scic_sds_controller.o \ - core/scic_sds_remote_device.o \ core/scic_sds_request.o \ core/scic_sds_stp_request.o \ core/scic_sds_stp_packet_request.o \ - core/scic_sds_stp_remote_device.o \ core/scic_sds_port.o \ core/scic_sds_port_configuration_agent.o \ core/scic_sds_phy.o \ core/scic_sds_ssp_request.o \ - core/scic_sds_remote_node_context.o \ core/scic_sds_smp_request.o \ - core/scic_sds_smp_remote_device.o \ - core/scic_sds_remote_node_table.o \ core/scic_sds_unsolicited_frame_control.o \ core/sci_base_state_machine.o \ core/sci_util.o diff --git a/drivers/scsi/isci/core/scic_remote_device.h b/drivers/scsi/isci/core/scic_remote_device.h deleted file mode 100644 index 23e90af..0000000 --- a/drivers/scsi/isci/core/scic_remote_device.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_REMOTE_DEVICE_H_ -#define _SCIC_REMOTE_DEVICE_H_ - -/** - * This file contains all of the interface methods that can be called by an - * SCIC user on the device object. - * - * - */ - - -#include "sci_status.h" -#include "intel_sas.h" - -struct scic_sds_port; -struct scic_sds_remote_device; - -/** - * - * - * - */ -enum scic_remote_device_not_ready_reason_code { - SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, - SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, - SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, - SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, - - SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX - -}; - -/** - * scic_remote_device_construct() - This method will perform the construction - * common to all remote device objects. - * @sci_port: SAS/SATA port through which this device is accessed. - * @sci_dev: remote device to construct - * - * It isn't necessary to call scic_remote_device_destruct() for device objects - * that have only called this method for construction. Once subsequent - * construction methods have been invoked (e.g. - * scic_remote_device_da_construct()), then destruction should occur. none - */ -void scic_remote_device_construct(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev); - -/** - * scic_remote_device_da_construct() - This method will construct a - * SCIC_REMOTE_DEVICE object for a direct attached (da) device. The - * information (e.g. IAF, Signature FIS, etc.) necessary to build the device - * is known to the SCI Core since it is contained in the scic_phy object. - * @remote_device: This parameter specifies the remote device to be destructed. - * - * The user must have previously called scic_remote_device_construct() Remote - * device objects are a limited resource. As such, they must be protected. - * Thus calls to construct and destruct are mutually exclusive and - * non-reentrant. Indicate if the remote device was successfully constructed. - * SCI_SUCCESS Returned if the device was successfully constructed. - * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been - * constructed. If it's an additional phy for the target, then call - * scic_remote_device_da_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned - * if the supplied parameters necessitate creation of a remote device for which - * the protocol is not supported by the underlying controller hardware. - * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core - * controller associated with the supplied parameters is unable to support - * additional remote devices. - */ -enum sci_status scic_remote_device_da_construct( - struct scic_sds_remote_device *remote_device); - -/** - * scic_remote_device_ea_construct() - This method will construct an - * SCIC_REMOTE_DEVICE object for an expander attached (ea) device from an - * SMP Discover Response. - * @remote_device: This parameter specifies the remote device to be destructed. - * @discover_response: This parameter specifies the SMP Discovery Response to - * be used in device creation. - * - * The user must have previously called scic_remote_device_construct() Remote - * device objects are a limited resource. As such, they must be protected. - * Thus calls to construct and destruct are mutually exclusive and - * non-reentrant. Indicate if the remote device was successfully constructed. - * SCI_SUCCESS Returned if the device was successfully constructed. - * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been - * constructed. If it's an additional phy for the target, then call - * scic_ea_remote_device_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned - * if the supplied parameters necessitate creation of a remote device for which - * the protocol is not supported by the underlying controller hardware. - * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core - * controller associated with the supplied parameters is unable to support - * additional remote devices. - */ -enum sci_status scic_remote_device_ea_construct( - struct scic_sds_remote_device *remote_device, - struct smp_response_discover *discover_response); - -/** - * scic_remote_device_destruct() - This method is utilized to free up a core's - * remote device object. - * @remote_device: This parameter specifies the remote device to be destructed. - * - * Remote device objects are a limited resource. As such, they must be - * protected. Thus calls to construct and destruct are mutually exclusive and - * non-reentrant. The return value shall indicate if the device was - * successfully destructed or if some failure occurred. enum sci_status This value - * is returned if the device is successfully destructed. - * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied - * device isn't valid (e.g. it's already been destoryed, the handle isn't - * valid, etc.). - */ -enum sci_status scic_remote_device_destruct( - struct scic_sds_remote_device *remote_device); - - - - - -/** - * scic_remote_device_start() - This method will start the supplied remote - * device. This method enables normal IO requests to flow through to the - * remote device. - * @remote_device: This parameter specifies the device to be started. - * @timeout: This parameter specifies the number of milliseconds in which the - * start operation should complete. - * - * An indication of whether the device was successfully started. SCI_SUCCESS - * This value is returned if the device was successfully started. - * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start - * the device when there have been no phys added to it. - */ -enum sci_status scic_remote_device_start( - struct scic_sds_remote_device *remote_device, - u32 timeout); - -/** - * scic_remote_device_stop() - This method will stop both transmission and - * reception of link activity for the supplied remote device. This method - * disables normal IO requests from flowing through to the remote device. - * @remote_device: This parameter specifies the device to be stopped. - * @timeout: This parameter specifies the number of milliseconds in which the - * stop operation should complete. - * - * An indication of whether the device was successfully stopped. SCI_SUCCESS - * This value is returned if the transmission and reception for the device was - * successfully stopped. - */ -enum sci_status scic_remote_device_stop( - struct scic_sds_remote_device *remote_device, - u32 timeout); - -/** - * scic_remote_device_reset() - This method will reset the device making it - * ready for operation. This method must be called anytime the device is - * reset either through a SMP phy control or a port hard reset request. - * @remote_device: This parameter specifies the device to be reset. - * - * This method does not actually cause the device hardware to be reset. This - * method resets the software object so that it will be operational after a - * device hardware reset completes. An indication of whether the device reset - * was accepted. SCI_SUCCESS This value is returned if the device reset is - * started. - */ -enum sci_status scic_remote_device_reset( - struct scic_sds_remote_device *remote_device); - -/** - * scic_remote_device_reset_complete() - This method informs the device object - * that the reset operation is complete and the device can resume operation - * again. - * @remote_device: This parameter specifies the device which is to be informed - * of the reset complete operation. - * - * An indication that the device is resuming operation. SCI_SUCCESS the device - * is resuming operation. - */ -enum sci_status scic_remote_device_reset_complete( - struct scic_sds_remote_device *remote_device); - - - -/** - * scic_remote_device_get_connection_rate() - This method simply returns the - * link rate at which communications to the remote device occur. - * @remote_device: This parameter specifies the device for which to get the - * connection rate. - * - * Return the link rate at which we transfer for the supplied remote device. - */ -enum sas_linkrate scic_remote_device_get_connection_rate( - struct scic_sds_remote_device *remote_device); - -/** - * scic_remote_device_get_protocols() - This method will indicate which - * protocols are supported by this remote device. - * @remote_device: This parameter specifies the device for which to return the - * protocol. - * @protocols: This parameter specifies the output values, from the remote - * device object, which indicate the protocols supported by the supplied - * remote_device. - * - * The type of protocols supported by this device. The values are returned as - * part of a bit mask in order to allow for multi-protocol support. - */ -void scic_remote_device_get_protocols( - struct scic_sds_remote_device *remote_device, - struct smp_discover_response_protocols *protocols); - - -#if !defined(DISABLE_ATAPI) -/** - * scic_remote_device_is_atapi() - - * @this_device: The device whose type is to be decided. - * - * This method first decide whether a device is a stp target, then decode the - * signature fis of a DA STP device to tell whether it is a standard end disk - * or an ATAPI device. bool Indicate a device is ATAPI device or not. - */ -bool scic_remote_device_is_atapi( - struct scic_sds_remote_device *device_handle); -#else /* !defined(DISABLE_ATAPI) */ -#define scic_remote_device_is_atapi(device_handle) false -#endif /* !defined(DISABLE_ATAPI) */ - - -#endif /* _SCIC_REMOTE_DEVICE_H_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 63f4cd1..c684d9e 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -57,13 +57,12 @@ #include "scic_controller.h" #include "scic_phy.h" #include "scic_port.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" #include "scu_registers.h" #include "scic_sds_phy.h" #include "scic_sds_port_configuration_agent.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "sci_environment.h" #include "sci_util.h" diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 4bb9a43..e15c4e2 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -73,7 +73,7 @@ #include "scic_config_parameters.h" #include "scic_sds_port.h" #include "scic_sds_phy.h" -#include "scic_sds_remote_node_table.h" +#include "remote_node_table.h" #include "scu_registers.h" #include "scu_constants.h" #include "scu_remote_node_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 34bd3b2..0901846 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -61,7 +61,7 @@ #include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" -#include "scic_sds_remote_node_context.h" +#include "remote_node_context.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index a8d7e51..b07e48e 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -60,8 +60,8 @@ #include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_remote_node_context.h" +#include "remote_device.h" +#include "remote_node_context.h" #include "scic_sds_request.h" #include "sci_environment.h" #include "scu_registers.h" diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c deleted file mode 100644 index d314e2b..0000000 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ /dev/null @@ -1,1664 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "intel_sas.h" -#include "scic_controller.h" -#include "scic_phy.h" -#include "scic_port.h" -#include "scic_remote_device.h" -#include "scic_sds_controller.h" -#include "scic_sds_phy.h" -#include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_remote_node_context.h" -#include "scic_sds_request.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_event_codes.h" - - -#define SCIC_SDS_REMOTE_DEVICE_RESET_TIMEOUT (1000) - -enum sci_status scic_remote_device_da_construct( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status; - u16 remote_node_index; - struct sci_sas_identify_address_frame_protocols protocols; - - /* - * This information is request to determine how many remote node context - * entries will be needed to store the remote node. - */ - scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols); - sci_dev->target_protocols.u.all = protocols.u.all; - sci_dev->is_direct_attached = true; -#if !defined(DISABLE_ATAPI) - sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev); -#endif - - status = scic_sds_controller_allocate_remote_node_context( - sci_dev->owning_port->owning_controller, - sci_dev, - &remote_node_index); - - if (status == SCI_SUCCESS) { - sci_dev->rnc.remote_node_index = remote_node_index; - - scic_sds_port_get_attached_sas_address( - sci_dev->owning_port, &sci_dev->device_address); - - if (sci_dev->target_protocols.u.bits.attached_ssp_target) { - sci_dev->has_ready_substate_machine = false; - } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { - sci_dev->has_ready_substate_machine = true; - - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - &sci_dev->parent, - scic_sds_stp_remote_device_ready_substate_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { - sci_dev->has_ready_substate_machine = true; - - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - &sci_dev->parent, - scic_sds_smp_remote_device_ready_substate_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } - - sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed( - sci_dev->owning_port); - - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; - } - - return status; -} - - -static void scic_sds_remote_device_get_info_from_smp_discover_response( - struct scic_sds_remote_device *sci_dev, - struct smp_response_discover *discover_response) -{ - /* decode discover_response to set sas_address to sci_dev. */ - sci_dev->device_address.high = - discover_response->attached_sas_address.high; - - sci_dev->device_address.low = - discover_response->attached_sas_address.low; - - sci_dev->target_protocols.u.all = discover_response->protocols.u.all; -} - - -enum sci_status scic_remote_device_ea_construct( - struct scic_sds_remote_device *sci_dev, - struct smp_response_discover *discover_response) -{ - enum sci_status status; - struct scic_sds_controller *scic; - - scic = scic_sds_port_get_controller(sci_dev->owning_port); - - scic_sds_remote_device_get_info_from_smp_discover_response( - sci_dev, discover_response); - - status = scic_sds_controller_allocate_remote_node_context( - scic, sci_dev, &sci_dev->rnc.remote_node_index); - - if (status == SCI_SUCCESS) { - if (sci_dev->target_protocols.u.bits.attached_ssp_target) { - sci_dev->has_ready_substate_machine = false; - } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { - sci_dev->has_ready_substate_machine = true; - - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - &sci_dev->parent, - scic_sds_smp_remote_device_ready_substate_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { - sci_dev->has_ready_substate_machine = true; - - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - &sci_dev->parent, - scic_sds_stp_remote_device_ready_substate_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } - - /* - * For SAS-2 the physical link rate is actually a logical link - * rate that incorporates multiplexing. The SCU doesn't - * incorporate multiplexing and for the purposes of the - * connection the logical link rate is that same as the - * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay - * one another, so this code works for both situations. */ - sci_dev->connection_rate = min_t(u16, - scic_sds_port_get_max_allowed_speed(sci_dev->owning_port), - discover_response->u2.sas1_1.negotiated_physical_link_rate - ); - - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; - } - - return status; -} - -enum sci_status scic_remote_device_destruct( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->state_handlers->destruct_handler(sci_dev); -} - - -enum sci_status scic_remote_device_start( - struct scic_sds_remote_device *sci_dev, - u32 timeout) -{ - return sci_dev->state_handlers->start_handler(sci_dev); -} - - -enum sci_status scic_remote_device_stop( - struct scic_sds_remote_device *sci_dev, - u32 timeout) -{ - return sci_dev->state_handlers->stop_handler(sci_dev); -} - - -enum sci_status scic_remote_device_reset( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->state_handlers->reset_handler(sci_dev); -} - - -enum sci_status scic_remote_device_reset_complete( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->state_handlers->reset_complete_handler(sci_dev); -} - - -enum sas_linkrate scic_remote_device_get_connection_rate( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->connection_rate; -} - - -void scic_remote_device_get_protocols( - struct scic_sds_remote_device *sci_dev, - struct smp_discover_response_protocols *pr) -{ - pr->u.all = sci_dev->target_protocols.u.all; -} - -#if !defined(DISABLE_ATAPI) -bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->is_atapi; -} -#endif - - -/* - * ***************************************************************************** - * * SCU DRIVER STANDARD (SDS) REMOTE DEVICE IMPLEMENTATIONS - * ***************************************************************************** */ - -/** - * - * - * Remote device timer requirements - */ -#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0) -#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES) - - -/** - * - * @sci_dev: The remote device for which the suspend is being requested. - * - * This method invokes the remote device suspend state handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_suspend( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type) -{ - return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type); -} - -/** - * - * @sci_dev: The remote device for which the resume is being requested. - * - * This method invokes the remote device resume state handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_resume( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->state_handlers->resume_handler(sci_dev); -} - -/** - * - * @sci_dev: The remote device for which the event handling is being - * requested. - * @frame_index: This is the frame index that is being processed. - * - * This method invokes the frame handler for the remote device state machine - * enum sci_status - */ -enum sci_status scic_sds_remote_device_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - return sci_dev->state_handlers->frame_handler(sci_dev, frame_index); -} - -/** - * - * @sci_dev: The remote device for which the event handling is being - * requested. - * @event_code: This is the event code that is to be processed. - * - * This method invokes the remote device event handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - return sci_dev->state_handlers->event_handler(sci_dev, event_code); -} - -/** - * - * @controller: The controller that is starting the io request. - * @sci_dev: The remote device for which the start io handling is being - * requested. - * @io_request: The io request that is being started. - * - * This method invokes the remote device start io handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_start_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) -{ - return sci_dev->state_handlers->start_io_handler( - sci_dev, io_request); -} - -/** - * - * @controller: The controller that is completing the io request. - * @sci_dev: The remote device for which the complete io handling is being - * requested. - * @io_request: The io request that is being completed. - * - * This method invokes the remote device complete io handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_complete_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) -{ - return sci_dev->state_handlers->complete_io_handler( - sci_dev, io_request); -} - -/** - * - * @controller: The controller that is starting the task request. - * @sci_dev: The remote device for which the start task handling is being - * requested. - * @io_request: The task request that is being started. - * - * This method invokes the remote device start task handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_start_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) -{ - return sci_dev->state_handlers->start_task_handler( - sci_dev, io_request); -} - -/** - * - * @controller: The controller that is completing the task request. - * @sci_dev: The remote device for which the complete task handling is - * being requested. - * @io_request: The task request that is being completed. - * - * This method invokes the remote device complete task handler. enum sci_status - */ - -/** - * - * @sci_dev: - * @request: - * - * This method takes the request and bulids an appropriate SCU context for the - * request and then requests the controller to post the request. none - */ -void scic_sds_remote_device_post_request( - struct scic_sds_remote_device *sci_dev, - u32 request) -{ - u32 context; - - context = scic_sds_remote_device_build_command_context(sci_dev, request); - - scic_sds_controller_post_request( - scic_sds_remote_device_get_controller(sci_dev), - context - ); -} - -#if !defined(DISABLE_ATAPI) -/** - * - * @sci_dev: The device to be checked. - * - * This method check the signature fis of a stp device to decide whether a - * device is atapi or not. true if a device is atapi device. False if a device - * is not atapi. - */ -bool scic_sds_remote_device_is_atapi( - struct scic_sds_remote_device *sci_dev) -{ - if (!sci_dev->target_protocols.u.bits.attached_stp_target) - return false; - else if (sci_dev->is_direct_attached) { - struct scic_sds_phy *phy; - struct scic_sata_phy_properties properties; - struct sata_fis_reg_d2h *signature_fis; - phy = scic_sds_port_get_a_connected_phy(sci_dev->owning_port); - scic_sata_phy_get_properties(phy, &properties); - - /* decode the signature fis. */ - signature_fis = &(properties.signature_fis); - - if ((signature_fis->sector_count == 0x01) - && (signature_fis->lba_low == 0x01) - && (signature_fis->lba_mid == 0x14) - && (signature_fis->lba_high == 0xEB) - && ((signature_fis->device & 0x5F) == 0x00) - ) { - /* An ATA device supporting the PACKET command set. */ - return true; - } else - return false; - } else { - /* Expander supported ATAPI device is not currently supported. */ - return false; - } -} -#endif - -/** - * - * @user_parameter: This is cast to a remote device object. - * - * This method is called once the remote node context is ready to be freed. - * The remote device can now report that its stop operation is complete. none - */ -static void scic_sds_cb_remote_device_rnc_destruct_complete( - void *user_parameter) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)user_parameter; - - BUG_ON(sci_dev->started_request_count != 0); - - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); -} - -/** - * - * @user_parameter: This is cast to a remote device object. - * - * This method is called once the remote node context has transisitioned to a - * ready state. This is the indication that the remote device object can also - * transition to ready. none - */ -static void scic_sds_remote_device_resume_complete_handler( - void *user_parameter) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)user_parameter; - - if ( - sci_base_state_machine_get_state(&sci_dev->state_machine) - != SCI_BASE_REMOTE_DEVICE_STATE_READY - ) { - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY - ); - } -} - -/** - * - * @device: This parameter specifies the device for which the request is being - * started. - * @request: This parameter specifies the request being started. - * @status: This parameter specifies the current start operation status. - * - * This method will perform the STP request start processing common to IO - * requests and task requests of all types. none - */ -void scic_sds_remote_device_start_request( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req, - enum sci_status status) -{ - /* We still have a fault in starting the io complete it on the port */ - if (status == SCI_SUCCESS) - scic_sds_remote_device_increment_request_count(sci_dev); - else{ - sci_dev->owning_port->state_handlers->complete_io_handler( - sci_dev->owning_port, sci_dev, sci_req - ); - } -} - - -/** - * - * @request: This parameter specifies the request being continued. - * - * This method will continue to post tc for a STP request. This method usually - * serves as a callback when RNC gets resumed during a task management - * sequence. none - */ -void scic_sds_remote_device_continue_request(void *dev) -{ - struct scic_sds_remote_device *sci_dev = dev; - - /* we need to check if this request is still valid to continue. */ - if (sci_dev->working_request) - scic_controller_continue_io(sci_dev->working_request); -} - -/** - * - * @user_parameter: This is cast to a remote device object. - * - * This method is called once the remote node context has reached a suspended - * state. The remote device can now report that its suspend operation is - * complete. none - */ - -/** - * This method will terminate all of the IO requests in the controllers IO - * request table that were targeted for this device. - * @sci_dev: This parameter specifies the remote device for which to - * attempt to terminate all requests. - * - * This method returns an indication as to whether all requests were - * successfully terminated. If a single request fails to be terminated, then - * this method will return the failure. - */ -static enum sci_status scic_sds_remote_device_terminate_requests( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status = SCI_SUCCESS; - enum sci_status terminate_status = SCI_SUCCESS; - struct scic_sds_request *sci_req; - u32 index; - u32 request_count = sci_dev->started_request_count; - - for (index = 0; - (index < SCI_MAX_IO_REQUESTS) && (request_count > 0); - index++) { - sci_req = sci_dev->owning_port->owning_controller->io_request_table[index]; - - if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) { - terminate_status = scic_controller_terminate_request( - sci_dev->owning_port->owning_controller, - sci_dev, - sci_req - ); - - if (terminate_status != SCI_SUCCESS) - status = terminate_status; - - request_count--; - } - } - - return status; -} - -static enum sci_status -default_device_handler(struct scic_sds_remote_device *sci_dev, - const char *func) -{ - dev_warn(scirdev_to_dev(sci_dev), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&sci_dev->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status scic_sds_remote_device_default_start_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -static enum sci_status scic_sds_remote_device_default_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_fail_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_destruct_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_reset_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_suspend_handler( - struct scic_sds_remote_device *sci_dev, u32 suspend_type) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_resume_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @event_code: The event code that the struct scic_sds_controller wants the device - * object to process. - * - * This method is the default event handler. It will call the RNC state - * machine handler for any RNC events otherwise it will log a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_core_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code, - bool is_ready_state) -{ - enum sci_status status; - - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TYPE_RNC_OPS_MISC: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); - break; - case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: - - if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { - status = SCI_SUCCESS; - - /* Suspend the associated RNC */ - scic_sds_remote_node_context_suspend(&sci_dev->rnc, - SCI_SOFTWARE_SUSPENSION, - NULL, NULL); - - dev_dbg(scirdev_to_dev(sci_dev), - "%s: device: %p event code: %x: %s\n", - __func__, sci_dev, event_code, - (is_ready_state) - ? "I_T_Nexus_Timeout event" - : "I_T_Nexus_Timeout event in wrong state"); - - break; - } - /* Else, fall through and treat as unhandled... */ - - default: - dev_dbg(scirdev_to_dev(sci_dev), - "%s: device: %p event code: %x: %s\n", - __func__, sci_dev, event_code, - (is_ready_state) - ? "unexpected event" - : "unexpected event in wrong state"); - status = SCI_FAILURE_INVALID_STATE; - break; - } - - return status; -} -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @event_code: The event code that the struct scic_sds_controller wants the device - * object to process. - * - * This method is the default event handler. It will call the RNC state - * machine handler for any RNC events otherwise it will log a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_default_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - return scic_sds_remote_device_core_event_handler(sci_dev, - event_code, - false); -} - -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @frame_index: The frame index for which the struct scic_sds_controller wants this - * device object to process. - * - * This method is the default unsolicited frame handler. It logs a warning, - * releases the frame and returns a failure. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_remote_device_default_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - dev_warn(scirdev_to_dev(sci_dev), - "%s: SCIC Remote Device requested to handle frame %x " - "while in wrong state %d\n", - __func__, - frame_index, - sci_base_state_machine_get_state( - &sci_dev->state_machine)); - - /* Return the frame back to the controller */ - scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(sci_dev), frame_index - ); - - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status scic_sds_remote_device_default_start_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @frame_index: The frame index for which the struct scic_sds_controller wants this - * device object to process. - * - * This method is a general ssp frame handler. In most cases the device object - * needs to route the unsolicited frame processing to the io request object. - * This method decodes the tag for the io request object and routes the - * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_remote_device_general_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status result; - struct sci_ssp_frame_header *frame_header; - struct scic_sds_request *io_request; - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), - frame_index, - (void **)&frame_header - ); - - if (SCI_SUCCESS == result) { - io_request = scic_sds_controller_get_io_request_from_tag( - scic_sds_remote_device_get_controller(sci_dev), frame_header->tag); - - if ((io_request == NULL) - || (io_request->target_device != sci_dev)) { - /* - * We could not map this tag to a valid IO request - * Just toss the frame and continue */ - scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(sci_dev), frame_index - ); - } else { - /* The IO request is now in charge of releasing the frame */ - result = io_request->state_handlers->frame_handler( - io_request, frame_index); - } - } - - return result; -} - -/** - * - * @[in]: sci_dev This is the device object that is receiving the event. - * @[in]: event_code The event code to process. - * - * This is a common method for handling events reported to the remote device - * from the controller object. enum sci_status - */ -enum sci_status scic_sds_remote_device_general_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - return scic_sds_remote_device_core_event_handler(sci_dev, - event_code, - true); -} - -/* - * ***************************************************************************** - * * STOPPED STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @device: - * - * This method takes the struct scic_sds_remote_device from a stopped state and - * attempts to start it. The RNC buffer for the device is constructed and the - * device state machine is transitioned to the - * SCIC_BASE_REMOTE_DEVICE_STATE_STARTING. enum sci_status SCI_SUCCESS if there is - * an RNC buffer available to construct the remote device. - * SCI_FAILURE_INSUFFICIENT_RESOURCES if there is no RNC buffer available in - * which to construct the remote device. - */ -static enum sci_status scic_sds_remote_device_stopped_state_start_handler( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status; - - status = scic_sds_remote_node_context_resume(&sci_dev->rnc, - scic_sds_remote_device_resume_complete_handler, sci_dev); - - if (status == SCI_SUCCESS) - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STARTING); - - return status; -} - -static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - return SCI_SUCCESS; -} - -/** - * - * @sci_dev: The struct scic_sds_remote_device which is cast into a - * struct scic_sds_remote_device. - * - * This method will destruct a struct scic_sds_remote_device that is in a stopped - * state. This is the only state from which a destruct request will succeed. - * The RNi for this struct scic_sds_remote_device is returned to the free pool and the - * device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( - struct scic_sds_remote_device *sci_dev) -{ - struct scic_sds_controller *scic; - - scic = scic_sds_remote_device_get_controller(sci_dev); - scic_sds_controller_free_remote_node_context(scic, sci_dev, - sci_dev->rnc.remote_node_index); - sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_FINAL); - - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * STARTING STATE HANDLERS - * ***************************************************************************** */ - -static enum sci_status scic_sds_remote_device_starting_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - /* - * This device has not yet started so there had better be no IO requests - */ - BUG_ON(sci_dev->started_request_count != 0); - - /* - * Destroy the remote node context - */ - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); - - /* - * Transition to the stopping state and wait for the remote node to - * complete being posted and invalidated. - */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); - - return SCI_SUCCESS; -} - -enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status = SCI_SUCCESS; - - /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); - - if (sci_dev->started_request_count == 0) { - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, - sci_dev); - } else - status = scic_sds_remote_device_terminate_requests(sci_dev); - - return status; -} - -/** - * - * @device: The struct scic_sds_remote_device object which is cast to a - * struct scic_sds_remote_device object. - * - * This is the ready state device reset handler enum sci_status - */ -enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct scic_sds_remote_device *sci_dev) -{ - /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); - - return SCI_SUCCESS; -} - -/* - * This method will attempt to start a task request for this device object. The - * remote device object will issue the start request for the task and if - * successful it will start the request for the port object then increment its - * own requet count. enum sci_status SCI_SUCCESS if the task request is started for - * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request - * object could not get the resources to start. - */ -static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - /* See if the port is in a state where we can start the IO request */ - result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(sci_dev), sci_dev, request); - - if (result == SCI_SUCCESS) { - result = scic_sds_remote_node_context_start_task(&sci_dev->rnc, - request); - if (result == SCI_SUCCESS) - result = scic_sds_request_start(request); - - scic_sds_remote_device_start_request(sci_dev, request, result); - } - - return result; -} - -/* - * This method will attempt to start an io request for this device object. The - * remote device object will issue the start request for the io and if - * successful it will start the request for the port object then increment its - * own requet count. enum sci_status SCI_SUCCESS if the io request is started for - * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request - * object could not get the resources to start. - */ -static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - /* See if the port is in a state where we can start the IO request */ - result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(sci_dev), sci_dev, request); - - if (result == SCI_SUCCESS) { - result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (result == SCI_SUCCESS) - result = scic_sds_request_start(request); - - scic_sds_remote_device_start_request(sci_dev, request, result); - } - - return result; -} - -/* - * This method will complete the request for the remote device object. The - * method will call the completion handler for the request object and if - * successful it will complete the request on the port object then decrement - * its own started_request_count. enum sci_status - */ -static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - result = scic_sds_request_complete(request); - - if (result != SCI_SUCCESS) - return result; - - /* See if the port is in a state - * where we can start the IO request */ - result = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - - if (result == SCI_SUCCESS) - scic_sds_remote_device_decrement_request_count(sci_dev); - - return result; -} - -/* - * ***************************************************************************** - * * STOPPING STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @sci_dev: The struct scic_sds_remote_device which is cast into a - * struct scic_sds_remote_device. - * - * This method will stop a struct scic_sds_remote_device that is already in the - * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error - * since we allow a stop request on a device that is alreay stopping or - * stopped. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( - struct scic_sds_remote_device *device) -{ - /* - * All requests should have been terminated, but if there is an - * attempt to stop a device already in the stopping state, then - * try again to terminate. */ - return scic_sds_remote_device_terminate_requests(device); -} - - -/** - * - * @device: The device object for which the request is completing. - * @request: The task request that is being completed. - * - * This method completes requests for this struct scic_sds_remote_device while it is - * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the - * complete method for the request object and if that is successful the port - * object is called to complete the task request. Then the device object itself - * completes the task request. If struct scic_sds_remote_device started_request_count - * goes to 0 and the invalidate RNC request has completed the device object can - * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status - */ -static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status = SCI_SUCCESS; - - status = scic_sds_request_complete(request); - - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - if (status != SCI_SUCCESS) - return status; - - scic_sds_remote_device_decrement_request_count(sci_dev); - - if (scic_sds_remote_device_get_request_count(sci_dev) == 0) - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, - sci_dev); - return SCI_SUCCESS; -} - -/** - * - * @device: The struct scic_sds_remote_device which is to be cast into a - * struct scic_sds_remote_device object. - * - * This method will complete the reset operation when the device is in the - * resetting state. enum sci_status - */ -static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( - struct scic_sds_remote_device *sci_dev) -{ - - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY - ); - - return SCI_SUCCESS; -} - -/** - * - * @device: The struct scic_sds_remote_device which is to be cast into a - * struct scic_sds_remote_device object. - * - * This method will stop the remote device while in the resetting state. - * enum sci_status - */ -static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING - ); - - return SCI_SUCCESS; -} - -/* - * This method completes requests for this struct scic_sds_remote_device while it is - * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the - * complete method for the request object and if that is successful the port - * object is called to complete the task request. Then the device object itself - * completes the task request. enum sci_status - */ -static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status = SCI_SUCCESS; - - status = scic_sds_request_complete(request); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - - if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(sci_dev); - } - } - - return status; -} - -/* - * ***************************************************************************** - * * FAILED STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @device: The struct scic_sds_remote_device which is to be cast into a - * struct scic_sds_remote_device object. - * - * This method handles the remove request for a failed struct scic_sds_remote_device - * object. The method will transition the device object to the - * SCIC_BASE_REMOTE_DEVICE_STATE_STOPPING. enum sci_status SCI_SUCCESS - */ - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { - [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .start_handler = scic_sds_remote_device_stopped_state_start_handler, - .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_starting_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, - .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, - .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - } -}; - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it - * immediatly transitions the remote device object to the stopped state. none - */ -static void scic_sds_remote_device_initial_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - sci_dev = container_of(object, typeof(*sci_dev), parent); - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); - - /* Initial state is a transitional state to the stopped state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it - * sets the stopped state handlers and if this state is entered from the - * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING then the SCI User is informed that the - * device stop is complete. none - */ -static void scic_sds_remote_device_stopped_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev; - struct scic_sds_controller *scic; - struct isci_remote_device *idev; - struct isci_host *ihost; - u32 prev_state; - - sci_dev = container_of(object, typeof(*sci_dev), parent); - scic = scic_sds_remote_device_get_controller(sci_dev); - ihost = sci_object_get_association(scic); - idev = sci_object_get_association(sci_dev); - - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); - - /* If we are entering from the stopping state let the SCI User know that - * the stop operation has completed. - */ - prev_state = sci_dev->state_machine.previous_state_id; - if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) - isci_remote_device_stop_complete(ihost, idev, SCI_SUCCESS); - - scic_sds_controller_remote_device_stopped(scic, sci_dev); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it - * sets the starting state handlers, sets the device not ready, and posts the - * remote node context to the hardware. none - */ -static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STARTING); - - isci_remote_device_not_ready(ihost, idev, - SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); -} - -static void scic_sds_remote_device_starting_state_exit(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - /* - * @todo Check the device object for the proper return code for this - * callback - */ - isci_remote_device_start_complete(ihost, idev, SCI_SUCCESS); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it sets - * the ready state handlers, and starts the ready substate machine. none - */ -static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - SET_STATE_HANDLER(sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_READY); - - scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; - - if (sci_dev->has_ready_substate_machine) - sci_base_state_machine_start(&sci_dev->ready_substate_machine); - else - isci_remote_device_ready(ihost, idev); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the exit function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it does - * nothing. none - */ -static void scic_sds_remote_device_ready_state_exit( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - if (sci_dev->has_ready_substate_machine) - sci_base_state_machine_stop(&sci_dev->ready_substate_machine); - else { - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - isci_remote_device_not_ready(ihost, idev, - SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); - } -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING it - * sets the stopping state handlers and posts an RNC invalidate request to the - * SCU hardware. none - */ -static void scic_sds_remote_device_stopping_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING - ); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_FAILED it sets - * the stopping state handlers. none - */ -static void scic_sds_remote_device_failed_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_FAILED - ); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING it - * sets the resetting state handlers. none - */ -static void scic_sds_remote_device_resetting_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING - ); - - scic_sds_remote_node_context_suspend( - &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the exit method for the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING it - * does nothing. none - */ -static void scic_sds_remote_device_resetting_state_exit( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_FINAL it sets - * the final state handlers. none - */ -static void scic_sds_remote_device_final_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_FINAL - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_remote_device_state_table[] = { - [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .enter_state = scic_sds_remote_device_initial_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .enter_state = scic_sds_remote_device_stopped_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .enter_state = scic_sds_remote_device_starting_state_enter, - .exit_state = scic_sds_remote_device_starting_state_exit - }, - [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .enter_state = scic_sds_remote_device_ready_state_enter, - .exit_state = scic_sds_remote_device_ready_state_exit - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .enter_state = scic_sds_remote_device_stopping_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .enter_state = scic_sds_remote_device_failed_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .enter_state = scic_sds_remote_device_resetting_state_enter, - .exit_state = scic_sds_remote_device_resetting_state_exit - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .enter_state = scic_sds_remote_device_final_state_enter, - }, -}; - -void scic_remote_device_construct(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev) -{ - sci_dev->owning_port = sci_port; - sci_dev->started_request_count = 0; - sci_dev->parent.private = NULL; - - sci_base_state_machine_construct( - &sci_dev->state_machine, - &sci_dev->parent, - scic_sds_remote_device_state_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL - ); - - sci_base_state_machine_start( - &sci_dev->state_machine - ); - - scic_sds_remote_node_context_construct(&sci_dev->rnc, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); - - sci_object_set_association(&sci_dev->rnc, sci_dev); -} diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h deleted file mode 100644 index bff44b8..0000000 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ /dev/null @@ -1,694 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_REMOTE_DEVICE_H_ -#define _SCIC_SDS_REMOTE_DEVICE_H_ - -#include "intel_sas.h" -#include "scu_remote_node_context.h" -#include "scic_sds_remote_node_context.h" -#include - -/** - * enum scic_sds_remote_device_states - This enumeration depicts all the states - * for the common remote device state machine. - * - * - */ -enum scic_sds_remote_device_states { - /** - * Simply the initial state for the base remote device state machine. - */ - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL, - - /** - * This state indicates that the remote device has successfully been - * stopped. In this state no new IO operations are permitted. - * This state is entered from the INITIAL state. - * This state is entered from the STOPPING state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED, - - /** - * This state indicates the the remote device is in the process of - * becoming ready (i.e. starting). In this state no new IO operations - * are permitted. - * This state is entered from the STOPPED state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STARTING, - - /** - * This state indicates the remote device is now ready. Thus, the user - * is able to perform IO operations on the remote device. - * This state is entered from the STARTING state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_READY, - - /** - * This state indicates that the remote device is in the process of - * stopping. In this state no new IO operations are permitted, but - * existing IO operations are allowed to complete. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, - - /** - * This state indicates that the remote device has failed. - * In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the READY state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_FAILED, - - /** - * This state indicates the device is being reset. - * In this state no new IO operations are permitted. - * This state is entered from the READY state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, - - /** - * Simply the final state for the base remote device state machine. - */ - SCI_BASE_REMOTE_DEVICE_STATE_FINAL, -}; - -/** - * enum scic_sds_ssp_remote_device_ready_substates - - * - * This is the enumeration of the ready substates for the - * struct scic_sds_remote_device. - */ -enum scic_sds_ssp_remote_device_ready_substates { - /** - * This is the initial state for the remote device ready substate. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL, - - /** - * This is the ready operational substate for the remote device. - * This is the normal operational state for a remote device. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL, - - /** - * This is the suspended state for the remote device. This is the state - * that the device is placed in when a RNC suspend is received by - * the SCU hardware. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED, - - /** - * This is the final state that the device is placed in before a change - * to the base state machine. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL, - - SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES -}; - -/** - * enum scic_sds_stp_remote_device_ready_substates - - * - * This is the enumeration for the struct scic_sds_remote_device ready substates - * for the STP remote device. - */ -enum scic_sds_stp_remote_device_ready_substates { - /** - * This is the idle substate for the stp remote device. When there are no - * active IO for the device it is is in this state. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, - - /** - * This is the command state for for the STP remote device. This state is - * entered when the device is processing a non-NCQ command. The device object - * will fail any new start IO requests until this command is complete. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD, - - /** - * This is the NCQ state for the STP remote device. This state is entered - * when the device is processing an NCQ reuqest. It will remain in this state - * so long as there is one or more NCQ requests being processed. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ, - - /** - * This is the NCQ error state for the STP remote device. This state is - * entered when an SDB error FIS is received by the device object while in the - * NCQ state. The device object will only accept a READ LOG command while in - * this state. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR, - -#if !defined(DISABLE_ATAPI) - /** - * This is the ATAPI error state for the STP ATAPI remote device. This state is - * entered when ATAPI device sends error status FIS without data while the device - * object is in CMD state. A suspension event is expected in this state. The device - * object will resume right away. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR, -#endif - - /** - * This is the READY substate indicates the device is waiting for the RESET task - * coming to be recovered from certain hardware specific error. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET, -}; - -/** - * enum scic_sds_smp_remote_device_ready_substates - - * - * This is the enumeration of the ready substates for the SMP REMOTE DEVICE. - */ -enum scic_sds_smp_remote_device_ready_substates { - /** - * This is the ready operational substate for the remote device. This is the - * normal operational state for a remote device. - */ - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, - - /** - * This is the suspended state for the remote device. This is the state that - * the device is placed in when a RNC suspend is received by the SCU hardware. - */ - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD, -}; - -/** - * struct scic_sds_remote_device - This structure contains the data for an SCU - * implementation of the SCU Core device data. - * - * - */ -struct scic_sds_remote_device { - /** - * The field specifies that the parent object for the base remote - * device is the base object itself. - */ - struct sci_base_object parent; - - /** - * This field contains the information for the base remote device state - * machine. - */ - struct sci_base_state_machine state_machine; - - /** - * This field is the programmed device port width. This value is - * written to the RCN data structure to tell the SCU how many open - * connections this device can have. - */ - u32 device_port_width; - - /** - * This field is the programmed connection rate for this remote device. It is - * used to program the TC with the maximum allowed connection rate. - */ - enum sas_linkrate connection_rate; - - /** - * This field contains the allowed target protocols for this remote device. - */ - struct smp_discover_response_protocols target_protocols; - - /** - * This field contains the device SAS address. - */ - struct sci_sas_address device_address; - - /** - * This filed is assinged the value of true if the device is directly - * attached to the port. - */ - bool is_direct_attached; - -#if !defined(DISABLE_ATAPI) - /** - * This filed is assinged the value of true if the device is an ATAPI - * device. - */ - bool is_atapi; -#endif - - /** - * This filed contains a pointer back to the port to which this device - * is assigned. - */ - struct scic_sds_port *owning_port; - - /** - * This field contains the SCU silicon remote node context specific - * information. - */ - struct scic_sds_remote_node_context rnc; - - /** - * This field contains the stated request count for the remote device. The - * device can not reach the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED until all - * requests are complete and the rnc_posted value is false. - */ - u32 started_request_count; - - /** - * This field contains a pointer to the working request object. It is only - * used only for SATA requests since the unsolicited frames we get from the - * hardware have no Tag value to look up the io request object. - */ - struct scic_sds_request *working_request; - - /** - * This field contains the reason for the remote device going not_ready. It is - * assigned in the state handlers and used in the state transition. - */ - u32 not_ready_reason; - - /** - * This field is true if this remote device has an initialzied ready substate - * machine. SSP devices do not have a ready substate machine and STP devices - * have a ready substate machine. - */ - bool has_ready_substate_machine; - - /** - * This field contains the state machine for the ready substate machine for - * this struct scic_sds_remote_device object. - */ - struct sci_base_state_machine ready_substate_machine; - - /** - * This field maintains the set of state handlers for the remote device - * object. These are changed each time the remote device enters a new state. - */ - const struct scic_sds_remote_device_state_handler *state_handlers; -}; - -static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = container_of(rnc, typeof(*sci_dev), rnc); - - return sci_dev; -} - -typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_handler_t)( - struct scic_sds_remote_device *device, - struct scic_sds_request *request, - void *, - enum sci_io_status); - -typedef enum sci_status (*scic_sds_remote_device_handler_t)( - struct scic_sds_remote_device *sci_dev); - -typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type); - -typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)( - struct scic_sds_remote_device *sci_dev); - -typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -typedef enum sci_status (*scic_sds_remote_device_event_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 event_code); - -typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( - struct scic_sds_remote_device *sci_dev); - -/** - * struct scic_sds_remote_device_state_handler - This structure conains the - * state handlers that are needed to process requests for the SCU remote - * device objects. - * - * - */ -struct scic_sds_remote_device_state_handler { - /** - * The start_handler specifies the method invoked when a user - * attempts to start a remote device. - */ - scic_sds_remote_device_handler_t start_handler; - - /** - * The stop_handler specifies the method invoked when a user attempts to - * stop a remote device. - */ - scic_sds_remote_device_handler_t stop_handler; - - /** - * The fail_handler specifies the method invoked when a remote device - * failure has occurred. A failure may be due to an inability to - * initialize/configure the device. - */ - scic_sds_remote_device_handler_t fail_handler; - - /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a remote device. - */ - scic_sds_remote_device_handler_t destruct_handler; - - /** - * The reset handler specifies the method invloked when requesting to - * reset a remote device. - */ - scic_sds_remote_device_handler_t reset_handler; - - /** - * The reset complete handler specifies the method invloked when - * reporting that a reset has completed to the remote device. - */ - scic_sds_remote_device_handler_t reset_complete_handler; - - /** - * The start_io_handler specifies the method invoked when a user - * attempts to start an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t start_io_handler; - - /** - * The complete_io_handler specifies the method invoked when a user - * attempts to complete an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t complete_io_handler; - - /** - * The continue_io_handler specifies the method invoked when a user - * attempts to continue an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t continue_io_handler; - - /** - * The start_task_handler specifies the method invoked when a user - * attempts to start a task management request for a remote device. - */ - scic_sds_remote_device_request_handler_t start_task_handler; - - /** - * The complete_task_handler specifies the method invoked when a user - * attempts to complete a task management request for a remote device. - */ - scic_sds_remote_device_request_handler_t complete_task_handler; - - - scic_sds_remote_device_suspend_handler_t suspend_handler; - scic_sds_remote_device_resume_handler_t resume_handler; - scic_sds_remote_device_event_handler_t event_handler; - scic_sds_remote_device_frame_handler_t frame_handler; -}; - -extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[]; -extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[]; -extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; - -/** - * scic_sds_remote_device_increment_request_count() - - * - * This macro incrments the request count for this device - */ -#define scic_sds_remote_device_increment_request_count(sci_dev) \ - ((sci_dev)->started_request_count++) - -/** - * scic_sds_remote_device_decrement_request_count() - - * - * This macro decrements the request count for this device. This count will - * never decrment past 0. - */ -#define scic_sds_remote_device_decrement_request_count(sci_dev) \ - ((sci_dev)->started_request_count > 0 ? \ - (sci_dev)->started_request_count-- : 0) - -/** - * scic_sds_remote_device_get_request_count() - - * - * This is a helper macro to return the current device request count. - */ -#define scic_sds_remote_device_get_request_count(sci_dev) \ - ((sci_dev)->started_request_count) - -/** - * scic_sds_remote_device_get_port() - - * - * This macro returns the owning port of this remote device obejct. - */ -#define scic_sds_remote_device_get_port(sci_dev) \ - ((sci_dev)->owning_port) - -/** - * scic_sds_remote_device_get_controller() - - * - * This macro returns the controller object that contains this device object - */ -#define scic_sds_remote_device_get_controller(sci_dev) \ - scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev)) - -/** - * scic_sds_remote_device_set_state_handlers() - - * - * This macro sets the remote device state handlers pointer and is set on entry - * to each device state. - */ -#define scic_sds_remote_device_set_state_handlers(sci_dev, handlers) \ - ((sci_dev)->state_handlers = (handlers)) - -/** - * scic_sds_remote_device_get_port() - - * - * This macro returns the owning port of this device - */ -#define scic_sds_remote_device_get_port(sci_dev) \ - ((sci_dev)->owning_port) - -/** - * scic_sds_remote_device_get_sequence() - - * - * This macro returns the remote device sequence value - */ -#define scic_sds_remote_device_get_sequence(sci_dev) \ - (\ - scic_sds_remote_device_get_controller(sci_dev)-> \ - remote_device_sequence[(sci_dev)->rnc.remote_node_index] \ - ) - -/** - * scic_sds_remote_device_get_controller_peg() - - * - * This macro returns the controllers protocol engine group - */ -#define scic_sds_remote_device_get_controller_peg(sci_dev) \ - (\ - scic_sds_controller_get_protocol_engine_group(\ - scic_sds_port_get_controller(\ - scic_sds_remote_device_get_port(sci_dev) \ - ) \ - ) \ - ) - -/** - * scic_sds_remote_device_get_port_index() - - * - * This macro returns the port index for the devices owning port - */ -#define scic_sds_remote_device_get_port_index(sci_dev) \ - (scic_sds_port_get_index(scic_sds_remote_device_get_port(sci_dev))) - -/** - * scic_sds_remote_device_get_index() - - * - * This macro returns the remote node index for this device object - */ -#define scic_sds_remote_device_get_index(sci_dev) \ - ((sci_dev)->rnc.remote_node_index) - -/** - * scic_sds_remote_device_build_command_context() - - * - * This macro builds a remote device context for the SCU post request operation - */ -#define scic_sds_remote_device_build_command_context(device, command) \ - ((command) \ - | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ - | (scic_sds_remote_device_get_port_index((device)) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ - | (scic_sds_remote_device_get_index((device))) \ - ) - -/** - * scic_sds_remote_device_set_working_request() - - * - * This macro makes the working request assingment for the remote device - * object. To clear the working request use this macro with a NULL request - * object. - */ -#define scic_sds_remote_device_set_working_request(device, request) \ - ((device)->working_request = (request)) - -enum sci_status scic_sds_remote_device_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -enum sci_status scic_sds_remote_device_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code); - -enum sci_status scic_sds_remote_device_start_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); - -enum sci_status scic_sds_remote_device_complete_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); - -enum sci_status scic_sds_remote_device_resume( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_suspend( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type); - -enum sci_status scic_sds_remote_device_start_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); - -void scic_sds_remote_device_post_request( - struct scic_sds_remote_device *sci_dev, - u32 request); - -#if !defined(DISABLE_ATAPI) -bool scic_sds_remote_device_is_atapi( - struct scic_sds_remote_device *sci_dev); -#else /* !defined(DISABLE_ATAPI) */ -#define scic_sds_remote_device_is_atapi(sci_dev) false -#endif /* !defined(DISABLE_ATAPI) */ - -void scic_sds_remote_device_start_request( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req, - enum sci_status status); - -void scic_sds_remote_device_continue_request(void *sci_dev); - -enum sci_status scic_sds_remote_device_default_start_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_fail_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_destruct_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_reset_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_default_start_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_suspend_handler( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type); - -enum sci_status scic_sds_remote_device_default_resume_handler( - struct scic_sds_remote_device *sci_dev); - - -enum sci_status scic_sds_remote_device_default_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_general_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -enum sci_status scic_sds_remote_device_general_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code); - -enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler( - struct scic_sds_remote_device *sci_dev); - -#endif /* _SCIC_SDS_REMOTE_DEVICE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/core/scic_sds_remote_node_context.c deleted file mode 100644 index e1d58f88..0000000 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.c +++ /dev/null @@ -1,1227 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "sci_base_state_machine.h" -#include "scic_remote_device.h" -#include "scic_sds_controller.h" -#include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_remote_node_context.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_event_codes.h" -#include "scu_task_context.h" - - -/** - * - * @sci_rnc: The RNC for which the is posted request is being made. - * - * This method will return true if the RNC is not in the initial state. In all - * other states the RNC is considered active and this will return true. The - * destroy request of the state machine drives the RNC back to the initial - * state. If the state machine changes then this routine will also have to be - * changed. bool true if the state machine is not in the initial state false if - * the state machine is in the initial state - */ - -/** - * - * @sci_rnc: The state of the remote node context object to check. - * - * This method will return true if the remote node context is in a READY state - * otherwise it will return false bool true if the remote node context is in - * the ready state. false if the remote node context is not in the ready state. - */ -bool scic_sds_remote_node_context_is_ready( - struct scic_sds_remote_node_context *sci_rnc) -{ - u32 current_state = sci_base_state_machine_get_state(&sci_rnc->state_machine); - - if (current_state == SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { - return true; - } - - return false; -} - -/** - * - * @sci_dev: The remote device to use to construct the RNC buffer. - * @rnc: The buffer into which the remote device data will be copied. - * - * This method will construct the RNC buffer for this remote device object. none - */ -static void scic_sds_remote_node_context_construct_buffer( - struct scic_sds_remote_node_context *sci_rnc) -{ - union scu_remote_node_context *rnc; - struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); - struct scic_sds_controller *scic; - - scic = scic_sds_remote_device_get_controller(sci_dev); - - rnc = scic_sds_controller_get_remote_node_context_buffer( - scic, sci_rnc->remote_node_index); - - memset(rnc, 0, sizeof(union scu_remote_node_context) - * scic_sds_remote_device_node_count(sci_dev)); - - rnc->ssp.remote_node_index = sci_rnc->remote_node_index; - rnc->ssp.remote_node_port_width = sci_dev->device_port_width; - rnc->ssp.logical_port_index = - scic_sds_remote_device_get_port_index(sci_dev); - - rnc->ssp.remote_sas_address_hi = SCIC_SWAP_DWORD(sci_dev->device_address.high); - rnc->ssp.remote_sas_address_lo = SCIC_SWAP_DWORD(sci_dev->device_address.low); - - rnc->ssp.nexus_loss_timer_enable = true; - rnc->ssp.check_bit = false; - rnc->ssp.is_valid = false; - rnc->ssp.is_remote_node_context = true; - rnc->ssp.function_number = 0; - - rnc->ssp.arbitration_wait_time = 0; - - - if ( - sci_dev->target_protocols.u.bits.attached_sata_device - || sci_dev->target_protocols.u.bits.attached_stp_target - ) { - rnc->ssp.connection_occupancy_timeout = - scic->user_parameters.sds1.stp_max_occupancy_timeout; - rnc->ssp.connection_inactivity_timeout = - scic->user_parameters.sds1.stp_inactivity_timeout; - } else { - rnc->ssp.connection_occupancy_timeout = - scic->user_parameters.sds1.ssp_max_occupancy_timeout; - rnc->ssp.connection_inactivity_timeout = - scic->user_parameters.sds1.ssp_inactivity_timeout; - } - - rnc->ssp.initial_arbitration_wait_time = 0; - - /* Open Address Frame Parameters */ - rnc->ssp.oaf_connection_rate = sci_dev->connection_rate; - rnc->ssp.oaf_features = 0; - rnc->ssp.oaf_source_zone_group = 0; - rnc->ssp.oaf_more_compatibility_features = 0; -} - -/** - * - * @sci_rnc: - * @callback: - * @callback_parameter: - * - * This method will setup the remote node context object so it will transition - * to its ready state. If the remote node context is already setup to - * transition to its final state then this function does nothing. none - */ -static void scic_sds_remote_node_context_setup_to_resume( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { - sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY; - sci_rnc->user_callback = callback; - sci_rnc->user_cookie = callback_parameter; - } -} - -/** - * - * @sci_rnc: - * @callback: - * @callback_parameter: - * - * This method will setup the remote node context object so it will transistion - * to its final state. none - */ -static void scic_sds_remote_node_context_setup_to_destory( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL; - sci_rnc->user_callback = callback; - sci_rnc->user_cookie = callback_parameter; -} - -/** - * - * @sci_rnc: - * @callback: - * - * This method will continue to resume a remote node context. This is used in - * the states where a resume is requested while a resume is in progress. - */ -static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { - sci_rnc->user_callback = callback; - sci_rnc->user_cookie = callback_parameter; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_STATE; -} - -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_default_destruct_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to stop while " - "in unexpected state %d\n", - __func__, - sci_rnc, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - /* - * We have decided that the destruct request on the remote node context can not fail - * since it is either in the initial/destroyed state or is can be destroyed. */ - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_remote_node_context_default_suspend_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 suspend_type, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to suspend " - "while in wrong state %d\n", - __func__, - sci_rnc, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_remote_node_context_default_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to resume " - "while in wrong state %d\n", - __func__, - sci_rnc, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_remote_node_context_default_start_io_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to start io " - "0x%p while in wrong state %d\n", - __func__, - sci_rnc, - sci_req, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; -} - -static enum sci_status scic_sds_remote_node_context_default_start_task_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to start " - "task 0x%p while in wrong state %d\n", - __func__, - sci_rnc, - sci_req, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE; -} - -static enum sci_status scic_sds_remote_node_context_default_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to process " - "event 0x%x while in wrong state %d\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * - * @sci_rnc: The rnc for which the task request is targeted. - * @sci_req: The request which is going to be started. - * - * This method determines if the task request can be started by the SCU - * hardware. When the RNC is in the ready state any task can be started. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_success_start_task_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - return SCI_SUCCESS; -} - -/** - * - * @sci_rnc: - * @callback: - * @callback_parameter: - * - * This method handles destruct calls from the various state handlers. The - * remote node context can be requested to destroy from any state. If there was - * a user callback it is always replaced with the request to destroy user - * callback. enum sci_status - */ -static enum sci_status scic_sds_remote_node_context_general_destruct_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - scic_sds_remote_node_context_setup_to_destory( - sci_rnc, callback, callback_parameter - ); - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ); - - return SCI_SUCCESS; -} - -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - if (sci_rnc->remote_node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); - - scic_sds_remote_node_context_construct_buffer(sci_rnc); - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE - ); - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_STATE; -} - -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_POST_RNC_COMPLETE: - status = SCI_SUCCESS; - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE - ); - break; - - default: - status = SCI_FAILURE; - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to " - "process unexpected event 0x%x while in posting " - "state\n", - __func__, - sci_rnc, - event_code); - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_invalidating_state_destruct_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - scic_sds_remote_node_context_setup_to_destory( - sci_rnc, callback, callback_parameter - ); - - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_remote_node_context_invalidating_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { - status = SCI_SUCCESS; - - if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE - ); - } else { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE - ); - } - } else { - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - /* - * We really dont care if the hardware is going to suspend - * the device since it's being invalidated anyway */ - dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p was " - "suspeneded by hardware while being " - "invalidated.\n", - __func__, - sci_rnc); - status = SCI_SUCCESS; - break; - - default: - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p " - "requested to process event 0x%x while " - "in state %d.\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state( - &sci_rnc->state_machine)); - status = SCI_FAILURE; - break; - } - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - - -static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) { - status = SCI_SUCCESS; - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE - ); - } else { - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - /* - * We really dont care if the hardware is going to suspend - * the device since it's being resumed anyway */ - dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p was " - "suspeneded by hardware while being resumed.\n", - __func__, - sci_rnc); - status = SCI_SUCCESS; - break; - - default: - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested " - "to process event 0x%x while in state %d.\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state( - &sci_rnc->state_machine)); - status = SCI_FAILURE; - break; - } - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - -/** - * - * @sci_rnc: The remote node context object being suspended. - * @callback: The callback when the suspension is complete. - * @callback_parameter: The parameter that is to be passed into the callback. - * - * This method will handle the suspend requests from the ready state. - * SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_ready_state_suspend_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 suspend_type, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - sci_rnc->user_callback = callback; - sci_rnc->user_cookie = callback_parameter; - sci_rnc->suspension_code = suspend_type; - - if (suspend_type == SCI_SOFTWARE_SUSPENSION) { - scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), - SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); - } - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE - ); - - return SCI_SUCCESS; -} - -/** - * - * @sci_rnc: The rnc for which the io request is targeted. - * @sci_req: The request which is going to be started. - * - * This method determines if the io request can be started by the SCU hardware. - * When the RNC is in the ready state any io request can be started. enum sci_status - * SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_ready_state_start_io_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - return SCI_SUCCESS; -} - - -static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TL_RNC_SUSPEND_TX: - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE - ); - - sci_rnc->suspension_code = scu_get_event_specifier(event_code); - status = SCI_SUCCESS; - break; - - case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE - ); - - sci_rnc->suspension_code = scu_get_event_specifier(event_code); - status = SCI_SUCCESS; - break; - - default: - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to " - "process event 0x%x while in state %d.\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state( - &sci_rnc->state_machine)); - - status = SCI_FAILURE; - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - enum sci_status status; - struct smp_discover_response_protocols protocols; - - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); - - /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ - - scic_remote_device_get_protocols(rnc_to_dev(sci_rnc), &protocols); - - if ( - (protocols.u.bits.attached_ssp_target == 1) - || (protocols.u.bits.attached_smp_target == 1) - ) { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); - - status = SCI_SUCCESS; - } else if (protocols.u.bits.attached_stp_target == 1) { - if (rnc_to_dev(sci_rnc)->is_direct_attached) { - /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); - } else { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ); - } - - status = SCI_SUCCESS; - } else { - status = SCI_FAILURE; - } - - return status; -} - -/** - * - * @sci_rnc: The remote node context which is to receive the task request. - * @sci_req: The task request to be transmitted to to the remote target - * device. - * - * This method will report a success or failure attempt to start a new task - * request to the hardware. Since all task requests are sent on the high - * priority queue they can be sent when the RCN is in a TX suspend state. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_suspended_start_task_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - scic_sds_remote_node_context_resume(sci_rnc, NULL, NULL); - - return SCI_SUCCESS; -} - -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); - - return SCI_FAILURE_INVALID_STATE; -} - -/* --------------------------------------------------------------------------- */ - -/** - * - * - * - */ -static enum sci_status scic_sds_remote_node_context_await_suspension_state_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); - - return SCI_SUCCESS; -} - -/** - * - * @sci_rnc: The remote node context which is to receive the task request. - * @sci_req: The task request to be transmitted to to the remote target - * device. - * - * This method will report a success or failure attempt to start a new task - * request to the hardware. Since all task requests are sent on the high - * priority queue they can be sent when the RCN is in a TX suspend state. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_await_suspension_state_start_task_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_remote_node_context_await_suspension_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TL_RNC_SUSPEND_TX: - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE - ); - - sci_rnc->suspension_code = scu_get_event_specifier(event_code); - status = SCI_SUCCESS; - break; - - case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE - ); - - sci_rnc->suspension_code = scu_get_event_specifier(event_code); - status = SCI_SUCCESS; - break; - - default: - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to " - "process event 0x%x while in state %d.\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state( - &sci_rnc->state_machine)); - - status = SCI_FAILURE; - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static struct scic_sds_remote_node_context_handlers -scic_sds_remote_node_context_state_handler_table[ - SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES] = -{ - /* SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE */ - { - scic_sds_remote_node_context_default_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_initial_state_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_default_start_task_handler, - scic_sds_remote_node_context_default_event_handler - }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_continue_to_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_default_start_task_handler, - scic_sds_remote_node_context_posting_state_event_handler - }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE */ - { - scic_sds_remote_node_context_invalidating_state_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_continue_to_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_default_start_task_handler, - scic_sds_remote_node_context_invalidating_state_event_handler - }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_continue_to_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_success_start_task_handler, - scic_sds_remote_node_context_resuming_state_event_handler - }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_ready_state_suspend_handler, - scic_sds_remote_node_context_default_resume_handler, - scic_sds_remote_node_context_ready_state_start_io_handler, - scic_sds_remote_node_context_success_start_task_handler, - scic_sds_remote_node_context_ready_state_event_handler - }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_tx_suspended_state_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_suspended_start_task_handler, - scic_sds_remote_node_context_default_event_handler - }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_suspended_start_task_handler, - scic_sds_remote_node_context_default_event_handler - }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_await_suspension_state_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_await_suspension_state_start_task_handler, - scic_sds_remote_node_context_await_suspension_state_event_handler - } -}; - -/* - * ***************************************************************************** - * * REMOTE NODE CONTEXT PRIVATE METHODS - * ***************************************************************************** */ - -/** - * - * - * This method just calls the user callback function and then resets the - * callback. - */ -static void scic_sds_remote_node_context_notify_user( - struct scic_sds_remote_node_context *rnc) -{ - if (rnc->user_callback != NULL) { - (*rnc->user_callback)(rnc->user_cookie); - - rnc->user_callback = NULL; - rnc->user_cookie = NULL; - } -} - -/** - * - * - * This method will continue the remote node context state machine by - * requesting to resume the remote node context state machine from its current - * state. - */ -static void scic_sds_remote_node_context_continue_state_transitions( - struct scic_sds_remote_node_context *rnc) -{ - if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { - rnc->state_handlers->resume_handler( - rnc, rnc->user_callback, rnc->user_cookie - ); - } -} - -/** - * - * @sci_rnc: The remote node context object that is to be validated. - * - * This method will mark the rnc buffer as being valid and post the request to - * the hardware. none - */ -static void scic_sds_remote_node_context_validate_context_buffer( - struct scic_sds_remote_node_context *sci_rnc) -{ - struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); - union scu_remote_node_context *rnc_buffer; - - rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(sci_dev), - sci_rnc->remote_node_index - ); - - rnc_buffer->ssp.is_valid = true; - - if (!sci_dev->is_direct_attached && - sci_dev->target_protocols.u.bits.attached_stp_target) { - scic_sds_remote_device_post_request(sci_dev, - SCU_CONTEXT_COMMAND_POST_RNC_96); - } else { - scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_32); - - if (sci_dev->is_direct_attached) { - scic_sds_port_setup_transports(sci_dev->owning_port, - sci_rnc->remote_node_index); - } - } -} - -/** - * - * @sci_rnc: The remote node context object that is to be invalidated. - * - * This method will update the RNC buffer and post the invalidate request. none - */ -static void scic_sds_remote_node_context_invalidate_context_buffer( - struct scic_sds_remote_node_context *sci_rnc) -{ - union scu_remote_node_context *rnc_buffer; - - rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(rnc_to_dev(sci_rnc)), - sci_rnc->remote_node_index); - - rnc_buffer->ssp.is_valid = false; - - scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), - SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); -} - -/* - * ***************************************************************************** - * * REMOTE NODE CONTEXT STATE ENTER AND EXIT METHODS - * ***************************************************************************** */ - -/** - * - * - * - */ -static void scic_sds_remote_node_context_initial_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; - - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE - ); - - /* - * Check to see if we have gotten back to the initial state because someone - * requested to destroy the remote node context object. */ - if ( - rnc->state_machine.previous_state_id - == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ) { - rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - - scic_sds_remote_node_context_notify_user(rnc); - } -} - -/** - * - * - * - */ -static void scic_sds_remote_node_context_posting_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_node_context *sci_rnc; - - sci_rnc = (struct scic_sds_remote_node_context *)object; - - SET_STATE_HANDLER( - sci_rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE - ); - - scic_sds_remote_node_context_validate_context_buffer(sci_rnc); -} - -/** - * - * - * - */ -static void scic_sds_remote_node_context_invalidating_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; - - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ); - - scic_sds_remote_node_context_invalidate_context_buffer(rnc); -} - -/** - * - * - * - */ -static void scic_sds_remote_node_context_resuming_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_node_context *rnc; - struct smp_discover_response_protocols protocols; - struct scic_sds_remote_device *sci_dev; - - rnc = (struct scic_sds_remote_node_context *)object; - sci_dev = rnc_to_dev(rnc); - - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); - - /* - * For direct attached SATA devices we need to clear the TLCR - * NCQ to TCi tag mapping on the phy and in cases where we - * resume because of a target reset we also need to update - * the STPTLDARNI register with the RNi of the device - */ - scic_remote_device_get_protocols(sci_dev, &protocols); - - if (protocols.u.bits.attached_stp_target == 1 && - sci_dev->is_direct_attached) { - scic_sds_port_setup_transports(sci_dev->owning_port, - rnc->remote_node_index); - } - - scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); -} - -/** - * - * - * - */ -static void scic_sds_remote_node_context_ready_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; - - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE - ); - - rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - - if (rnc->user_callback != NULL) { - scic_sds_remote_node_context_notify_user(rnc); - } -} - -/** - * - * - * - */ -static void scic_sds_remote_node_context_tx_suspended_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; - - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE - ); - - scic_sds_remote_node_context_continue_state_transitions(rnc); -} - -/** - * - * - * - */ -static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; - - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE - ); - - scic_sds_remote_node_context_continue_state_transitions(rnc); -} - -/** - * - * - * - */ -static void scic_sds_remote_node_context_await_suspension_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; - - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_remote_node_context_state_table[] = { - [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { - .enter_state = scic_sds_remote_node_context_initial_state_enter, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { - .enter_state = scic_sds_remote_node_context_posting_state_enter, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { - .enter_state = scic_sds_remote_node_context_invalidating_state_enter, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { - .enter_state = scic_sds_remote_node_context_resuming_state_enter, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { - .enter_state = scic_sds_remote_node_context_ready_state_enter, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { - .enter_state = scic_sds_remote_node_context_tx_suspended_state_enter, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { - .enter_state = scic_sds_remote_node_context_tx_rx_suspended_state_enter, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { - .enter_state = scic_sds_remote_node_context_await_suspension_state_enter, - }, -}; - -void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, - u16 remote_node_index) -{ - memset(rnc, 0, sizeof(struct scic_sds_remote_node_context)); - - rnc->remote_node_index = remote_node_index; - rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - - sci_base_state_machine_construct( - &rnc->state_machine, - &rnc->parent, - scic_sds_remote_node_context_state_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE - ); - - sci_base_state_machine_start(&rnc->state_machine); -} diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/core/scic_sds_remote_node_context.h deleted file mode 100644 index b3f2546..0000000 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ -#define _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ - -/** - * This file contains the structures, constants, and prototypes associated with - * the remote node context in the silicon. It exists to model and manage - * the remote node context in the silicon. - * - * - */ - -#include "sci_base_state.h" -#include "sci_base_state_machine.h" - -/** - * - * - * This constant represents an invalid remote device id, it is used to program - * the STPDARNI register so the driver knows when it has received a SIGNATURE - * FIS from the SCU. - */ -#define SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX 0x0FFF - -#define SCU_HARDWARE_SUSPENSION (0) -#define SCI_SOFTWARE_SUSPENSION (1) - -struct scic_sds_request; -struct scic_sds_remote_device; -struct scic_sds_remote_node_context; - -typedef void (*scics_sds_remote_node_context_callback)(void *); - -typedef enum sci_status (*scic_sds_remote_node_context_operation)( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter - ); - -typedef enum sci_status (*scic_sds_remote_node_context_suspend_operation)( - struct scic_sds_remote_node_context *sci_rnc, - u32 suspension_type, - scics_sds_remote_node_context_callback callback, - void *callback_parameter - ); - -typedef enum sci_status (*scic_sds_remote_node_context_io_request)( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req - ); - -typedef enum sci_status (*scic_sds_remote_node_context_event_handler)( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code - ); - -struct scic_sds_remote_node_context_handlers { - /** - * This handle is invoked to stop the RNC. The callback is invoked when after - * the hardware notification that the RNC has been invalidated. - */ - scic_sds_remote_node_context_operation destruct_handler; - - /** - * This handler is invoked when there is a request to suspend the RNC. The - * callback is invoked after the hardware notification that the remote node is - * suspended. - */ - scic_sds_remote_node_context_suspend_operation suspend_handler; - - /** - * This handler is invoked when there is a request to resume the RNC. The - * callback is invoked when after the RNC has reached the ready state. - */ - scic_sds_remote_node_context_operation resume_handler; - - /** - * This handler is invoked when there is a request to start an io request - * operation. - */ - scic_sds_remote_node_context_io_request start_io_handler; - - /** - * This handler is invoked when there is a request to start a task request - * operation. - */ - scic_sds_remote_node_context_io_request start_task_handler; - - /** - * This handler is invoked where there is an RNC event that must be processed. - */ - scic_sds_remote_node_context_event_handler event_handler; - -}; - -/** - * This is the enumeration of the remote node context states. - */ -enum scis_sds_remote_node_context_states { - /** - * This state is the initial state for a remote node context. On a resume - * request the remote node context will transition to the posting state. - */ - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE, - - /** - * This is a transition state that posts the RNi to the hardware. Once the RNC - * is posted the remote node context will be made ready. - */ - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE, - - /** - * This is a transition state that will post an RNC invalidate to the - * hardware. Once the invalidate is complete the remote node context will - * transition to the posting state. - */ - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE, - - /** - * This is a transition state that will post an RNC resume to the hardare. - * Once the event notification of resume complete is received the remote node - * context will transition to the ready state. - */ - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE, - - /** - * This is the state that the remote node context must be in to accept io - * request operations. - */ - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE, - - /** - * This is the state that the remote node context transitions to when it gets - * a TX suspend notification from the hardware. - */ - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE, - - /** - * This is the state that the remote node context transitions to when it gets - * a TX RX suspend notification from the hardware. - */ - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE, - - /** - * This state is a wait state for the remote node context that waits for a - * suspend notification from the hardware. This state is entered when either - * there is a request to supend the remote node context or when there is a TC - * completion where the remote node will be suspended by the hardware. - */ - SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE, - - SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES - -}; - -/** - * - * - * This enumeration is used to define the end destination state for the remote - * node context. - */ -enum scic_sds_remote_node_context_destination_state { - SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED, - SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY, - SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL -}; - -/** - * struct scic_sds_remote_node_context - This structure contains the data - * associated with the remote node context object. The remote node context - * (RNC) object models the the remote device information necessary to manage - * the silicon RNC. - */ -struct scic_sds_remote_node_context { - /* - * parent object - */ - struct sci_base_object parent; - - /** - * This field indicates the remote node index (RNI) associated with - * this RNC. - */ - u16 remote_node_index; - - /** - * This field is the recored suspension code or the reason for the remote node - * context suspension. - */ - u32 suspension_code; - - /** - * This field is true if the remote node context is resuming from its current - * state. This can cause an automatic resume on receiving a suspension - * notification. - */ - enum scic_sds_remote_node_context_destination_state destination_state; - - /** - * This field contains the callback function that the user requested to be - * called when the requested state transition is complete. - */ - scics_sds_remote_node_context_callback user_callback; - - /** - * This field contains the parameter that is called when the user requested - * state transition is completed. - */ - void *user_cookie; - - /** - * This field contains the data for the object's state machine. - */ - struct sci_base_state_machine state_machine; - - struct scic_sds_remote_node_context_handlers *state_handlers; -}; - -void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, - u16 remote_node_index); - - -bool scic_sds_remote_node_context_is_ready( - struct scic_sds_remote_node_context *sci_rnc); - -#define scic_sds_remote_node_context_get_remote_node_index(rcn) \ - ((rnc)->remote_node_index) - -#define scic_sds_remote_node_context_event_handler(rnc, event_code) \ - ((rnc)->state_handlers->event_handler(rnc, event_code)) - -#define scic_sds_remote_node_context_resume(rnc, callback, parameter) \ - ((rnc)->state_handlers->resume_handler(rnc, callback, parameter)) - -#define scic_sds_remote_node_context_suspend(rnc, suspend_type, callback, parameter) \ - ((rnc)->state_handlers->suspend_handler(rnc, suspend_type, callback, parameter)) - -#define scic_sds_remote_node_context_destruct(rnc, callback, parameter) \ - ((rnc)->state_handlers->destruct_handler(rnc, callback, parameter)) - -#define scic_sds_remote_node_context_start_io(rnc, request) \ - ((rnc)->state_handlers->start_io_handler(rnc, request)) - -#define scic_sds_remote_node_context_start_task(rnc, task) \ - ((rnc)->state_handlers->start_task_handler(rnc, task)) - -#endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.c b/drivers/scsi/isci/core/scic_sds_remote_node_table.c deleted file mode 100644 index 77919a2..0000000 --- a/drivers/scsi/isci/core/scic_sds_remote_node_table.c +++ /dev/null @@ -1,600 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains the implementation of the SCIC_SDS_REMOTE_NODE_TABLE - * public, protected, and private methods. - * - * - */ -#include "sci_util.h" -#include "sci_environment.h" -#include "scic_sds_remote_node_table.h" -#include "scic_sds_remote_node_context.h" - -/** - * - * @remote_node_table: This is the remote node index table from which the - * selection will be made. - * @group_table_index: This is the index to the group table from which to - * search for an available selection. - * - * This routine will find the bit position in absolute bit terms of the next 32 - * + bit position. If there are available bits in the first u32 then it is - * just bit position. u32 This is the absolute bit position for an available - * group. - */ -static u32 scic_sds_remote_node_table_get_group_index( - struct scic_remote_node_table *remote_node_table, - u32 group_table_index) -{ - u32 dword_index; - u32 *group_table; - u32 bit_index; - - group_table = remote_node_table->remote_node_groups[group_table_index]; - - for (dword_index = 0; dword_index < remote_node_table->group_array_size; dword_index++) { - if (group_table[dword_index] != 0) { - for (bit_index = 0; bit_index < 32; bit_index++) { - if ((group_table[dword_index] & (1 << bit_index)) != 0) { - return (dword_index * 32) + bit_index; - } - } - } - } - - return SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX; -} - -/** - * - * @out]: remote_node_table This the remote node table in which to clear the - * selector. - * @set_index: This is the remote node selector in which the change will be - * made. - * @group_index: This is the bit index in the table to be modified. - * - * This method will clear the group index entry in the specified group index - * table. none - */ -static void scic_sds_remote_node_table_clear_group_index( - struct scic_remote_node_table *remote_node_table, - u32 group_table_index, - u32 group_index) -{ - u32 dword_index; - u32 bit_index; - u32 *group_table; - - BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); - BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); - - dword_index = group_index / 32; - bit_index = group_index % 32; - group_table = remote_node_table->remote_node_groups[group_table_index]; - - group_table[dword_index] = group_table[dword_index] & ~(1 << bit_index); -} - -/** - * - * @out]: remote_node_table This the remote node table in which to set the - * selector. - * @group_table_index: This is the remote node selector in which the change - * will be made. - * @group_index: This is the bit position in the table to be modified. - * - * This method will set the group index bit entry in the specified gropu index - * table. none - */ -static void scic_sds_remote_node_table_set_group_index( - struct scic_remote_node_table *remote_node_table, - u32 group_table_index, - u32 group_index) -{ - u32 dword_index; - u32 bit_index; - u32 *group_table; - - BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); - BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); - - dword_index = group_index / 32; - bit_index = group_index % 32; - group_table = remote_node_table->remote_node_groups[group_table_index]; - - group_table[dword_index] = group_table[dword_index] | (1 << bit_index); -} - -/** - * - * @out]: remote_node_table This is the remote node table in which to modify - * the remote node availability. - * @remote_node_index: This is the remote node index that is being returned to - * the table. - * - * This method will set the remote to available in the remote node allocation - * table. none - */ -static void scic_sds_remote_node_table_set_node_index( - struct scic_remote_node_table *remote_node_table, - u32 remote_node_index) -{ - u32 dword_location; - u32 dword_remainder; - u32 slot_normalized; - u32 slot_position; - - BUG_ON( - (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) - <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) - ); - - dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; - dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; - slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); - slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; - - remote_node_table->available_remote_nodes[dword_location] |= - 1 << (slot_normalized + slot_position); -} - -/** - * - * @out]: remote_node_table This is the remote node table from which to clear - * the available remote node bit. - * @remote_node_index: This is the remote node index which is to be cleared - * from the table. - * - * This method clears the remote node index from the table of available remote - * nodes. none - */ -static void scic_sds_remote_node_table_clear_node_index( - struct scic_remote_node_table *remote_node_table, - u32 remote_node_index) -{ - u32 dword_location; - u32 dword_remainder; - u32 slot_position; - u32 slot_normalized; - - BUG_ON( - (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) - <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) - ); - - dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; - dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; - slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); - slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; - - remote_node_table->available_remote_nodes[dword_location] &= - ~(1 << (slot_normalized + slot_position)); -} - -/** - * - * @out]: remote_node_table The remote node table from which the slot will be - * cleared. - * @group_index: The index for the slot that is to be cleared. - * - * This method clears the entire table slot at the specified slot index. none - */ -static void scic_sds_remote_node_table_clear_group( - struct scic_remote_node_table *remote_node_table, - u32 group_index) -{ - u32 dword_location; - u32 dword_remainder; - u32 dword_value; - - BUG_ON( - (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) - <= (group_index / SCU_STP_REMOTE_NODE_COUNT) - ); - - dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; - dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; - - dword_value = remote_node_table->available_remote_nodes[dword_location]; - dword_value &= ~(SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); - remote_node_table->available_remote_nodes[dword_location] = dword_value; -} - -/** - * - * @remote_node_table: - * - * THis method sets an entire remote node group in the remote node table. - */ -static void scic_sds_remote_node_table_set_group( - struct scic_remote_node_table *remote_node_table, - u32 group_index) -{ - u32 dword_location; - u32 dword_remainder; - u32 dword_value; - - BUG_ON( - (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) - <= (group_index / SCU_STP_REMOTE_NODE_COUNT) - ); - - dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; - dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; - - dword_value = remote_node_table->available_remote_nodes[dword_location]; - dword_value |= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); - remote_node_table->available_remote_nodes[dword_location] = dword_value; -} - -/** - * - * @remote_node_table: This is the remote node table that for which the group - * value is to be returned. - * @group_index: This is the group index to use to find the group value. - * - * This method will return the group value for the specified group index. The - * bit values at the specified remote node group index. - */ -static u8 scic_sds_remote_node_table_get_group_value( - struct scic_remote_node_table *remote_node_table, - u32 group_index) -{ - u32 dword_location; - u32 dword_remainder; - u32 dword_value; - - dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; - dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; - - dword_value = remote_node_table->available_remote_nodes[dword_location]; - dword_value &= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); - dword_value = dword_value >> (dword_remainder * 4); - - return (u8)dword_value; -} - -/** - * - * @out]: remote_node_table The remote that which is to be initialized. - * @remote_node_entries: The number of entries to put in the table. - * - * This method will initialize the remote node table for use. none - */ -void scic_sds_remote_node_table_initialize( - struct scic_remote_node_table *remote_node_table, - u32 remote_node_entries) -{ - u32 index; - - /* - * Initialize the raw data we could improve the speed by only initializing - * those entries that we are actually going to be used */ - memset( - remote_node_table->available_remote_nodes, - 0x00, - sizeof(remote_node_table->available_remote_nodes) - ); - - memset( - remote_node_table->remote_node_groups, - 0x00, - sizeof(remote_node_table->remote_node_groups) - ); - - /* Initialize the available remote node sets */ - remote_node_table->available_nodes_array_size = (u16) - (remote_node_entries / SCIC_SDS_REMOTE_NODES_PER_DWORD) - + ((remote_node_entries % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0); - - - /* Initialize each full DWORD to a FULL SET of remote nodes */ - for (index = 0; index < remote_node_entries; index++) { - scic_sds_remote_node_table_set_node_index(remote_node_table, index); - } - - remote_node_table->group_array_size = (u16) - (remote_node_entries / (SCU_STP_REMOTE_NODE_COUNT * 32)) - + ((remote_node_entries % (SCU_STP_REMOTE_NODE_COUNT * 32)) != 0); - - for (index = 0; index < (remote_node_entries / SCU_STP_REMOTE_NODE_COUNT); index++) { - /* - * These are all guaranteed to be full slot values so fill them in the - * available sets of 3 remote nodes */ - scic_sds_remote_node_table_set_group_index(remote_node_table, 2, index); - } - - /* Now fill in any remainders that we may find */ - if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 2) { - scic_sds_remote_node_table_set_group_index(remote_node_table, 1, index); - } else if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 1) { - scic_sds_remote_node_table_set_group_index(remote_node_table, 0, index); - } -} - -/** - * - * @out]: remote_node_table The remote node table from which to allocate a - * remote node. - * @table_index: The group index that is to be used for the search. - * - * This method will allocate a single RNi from the remote node table. The - * table index will determine from which remote node group table to search. - * This search may fail and another group node table can be specified. The - * function is designed to allow a serach of the available single remote node - * group up to the triple remote node group. If an entry is found in the - * specified table the remote node is removed and the remote node groups are - * updated. The RNi value or an invalid remote node context if an RNi can not - * be found. - */ -static u16 scic_sds_remote_node_table_allocate_single_remote_node( - struct scic_remote_node_table *remote_node_table, - u32 group_table_index) -{ - u8 index; - u8 group_value; - u32 group_index; - u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - - group_index = scic_sds_remote_node_table_get_group_index( - remote_node_table, group_table_index); - - /* We could not find an available slot in the table selector 0 */ - if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { - group_value = scic_sds_remote_node_table_get_group_value( - remote_node_table, group_index); - - for (index = 0; index < SCU_STP_REMOTE_NODE_COUNT; index++) { - if (((1 << index) & group_value) != 0) { - /* We have selected a bit now clear it */ - remote_node_index = (u16)(group_index * SCU_STP_REMOTE_NODE_COUNT - + index); - - scic_sds_remote_node_table_clear_group_index( - remote_node_table, group_table_index, group_index - ); - - scic_sds_remote_node_table_clear_node_index( - remote_node_table, remote_node_index - ); - - if (group_table_index > 0) { - scic_sds_remote_node_table_set_group_index( - remote_node_table, group_table_index - 1, group_index - ); - } - - break; - } - } - } - - return remote_node_index; -} - -/** - * - * @remote_node_table: This is the remote node table from which to allocate the - * remote node entries. - * @group_table_index: THis is the group table index which must equal two (2) - * for this operation. - * - * This method will allocate three consecutive remote node context entries. If - * there are no remaining triple entries the function will return a failure. - * The remote node index that represents three consecutive remote node entries - * or an invalid remote node context if none can be found. - */ -static u16 scic_sds_remote_node_table_allocate_triple_remote_node( - struct scic_remote_node_table *remote_node_table, - u32 group_table_index) -{ - u32 group_index; - u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - - group_index = scic_sds_remote_node_table_get_group_index( - remote_node_table, group_table_index); - - if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { - remote_node_index = (u16)group_index * SCU_STP_REMOTE_NODE_COUNT; - - scic_sds_remote_node_table_clear_group_index( - remote_node_table, group_table_index, group_index - ); - - scic_sds_remote_node_table_clear_group( - remote_node_table, group_index - ); - } - - return remote_node_index; -} - -/** - * - * @remote_node_table: This is the remote node table from which the remote node - * allocation is to take place. - * @remote_node_count: This is ther remote node count which is one of - * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). - * - * This method will allocate a remote node that mataches the remote node count - * specified by the caller. Valid values for remote node count is - * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). u16 This is - * the remote node index that is returned or an invalid remote node context. - */ -u16 scic_sds_remote_node_table_allocate_remote_node( - struct scic_remote_node_table *remote_node_table, - u32 remote_node_count) -{ - u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - - if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { - remote_node_index = - scic_sds_remote_node_table_allocate_single_remote_node( - remote_node_table, 0); - - if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - remote_node_index = - scic_sds_remote_node_table_allocate_single_remote_node( - remote_node_table, 1); - } - - if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - remote_node_index = - scic_sds_remote_node_table_allocate_single_remote_node( - remote_node_table, 2); - } - } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { - remote_node_index = - scic_sds_remote_node_table_allocate_triple_remote_node( - remote_node_table, 2); - } - - return remote_node_index; -} - -/** - * - * @remote_node_table: - * - * This method will free a single remote node index back to the remote node - * table. This routine will update the remote node groups - */ -static void scic_sds_remote_node_table_release_single_remote_node( - struct scic_remote_node_table *remote_node_table, - u16 remote_node_index) -{ - u32 group_index; - u8 group_value; - - group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; - - group_value = scic_sds_remote_node_table_get_group_value(remote_node_table, group_index); - - /* - * Assert that we are not trying to add an entry to a slot that is already - * full. */ - BUG_ON(group_value == SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE); - - if (group_value == 0x00) { - /* - * There are no entries in this slot so it must be added to the single - * slot table. */ - scic_sds_remote_node_table_set_group_index(remote_node_table, 0, group_index); - } else if ((group_value & (group_value - 1)) == 0) { - /* - * There is only one entry in this slot so it must be moved from the - * single slot table to the dual slot table */ - scic_sds_remote_node_table_clear_group_index(remote_node_table, 0, group_index); - scic_sds_remote_node_table_set_group_index(remote_node_table, 1, group_index); - } else { - /* - * There are two entries in the slot so it must be moved from the dual - * slot table to the tripple slot table. */ - scic_sds_remote_node_table_clear_group_index(remote_node_table, 1, group_index); - scic_sds_remote_node_table_set_group_index(remote_node_table, 2, group_index); - } - - scic_sds_remote_node_table_set_node_index(remote_node_table, remote_node_index); -} - -/** - * - * @remote_node_table: This is the remote node table to which the remote node - * index is to be freed. - * - * This method will release a group of three consecutive remote nodes back to - * the free remote nodes. - */ -static void scic_sds_remote_node_table_release_triple_remote_node( - struct scic_remote_node_table *remote_node_table, - u16 remote_node_index) -{ - u32 group_index; - - group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; - - scic_sds_remote_node_table_set_group_index( - remote_node_table, 2, group_index - ); - - scic_sds_remote_node_table_set_group(remote_node_table, group_index); -} - -/** - * - * @remote_node_table: The remote node table to which the remote node index is - * to be freed. - * @remote_node_count: This is the count of consecutive remote nodes that are - * to be freed. - * - * This method will release the remote node index back into the remote node - * table free pool. - */ -void scic_sds_remote_node_table_release_remote_node_index( - struct scic_remote_node_table *remote_node_table, - u32 remote_node_count, - u16 remote_node_index) -{ - if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { - scic_sds_remote_node_table_release_single_remote_node( - remote_node_table, remote_node_index); - } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { - scic_sds_remote_node_table_release_triple_remote_node( - remote_node_table, remote_node_index); - } -} - diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.h b/drivers/scsi/isci/core/scic_sds_remote_node_table.h deleted file mode 100644 index 9c02a6c..0000000 --- a/drivers/scsi/isci/core/scic_sds_remote_node_table.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_REMOTE_NODE_TABLE_H_ -#define _SCIC_SDS_REMOTE_NODE_TABLE_H_ - -/** - * This file contains the structures, constants and prototypes used for the - * remote node table. - * - * - */ - -#include "sci_controller_constants.h" - -/** - * - * - * Remote node sets are sets of remote node index in the remtoe node table The - * SCU hardware requires that STP remote node entries take three consecutive - * remote node index so the table is arranged in sets of three. The bits are - * used as 0111 0111 to make a byte and the bits define the set of three remote - * nodes to use as a sequence. - */ -#define SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE 2 - -/** - * - * - * Since the remote node table is organized as DWORDS take the remote node sets - * in bytes and represent them in DWORDs. The lowest ordered bits are the ones - * used in case full DWORD is not being used. i.e. 0000 0000 0000 0000 0111 - * 0111 0111 0111 // if only a single WORD is in use in the DWORD. - */ -#define SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD \ - (sizeof(u32) * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) -/** - * - * - * This is a count of the numeber of remote nodes that can be represented in a - * byte - */ -#define SCIC_SDS_REMOTE_NODES_PER_BYTE \ - (SCU_STP_REMOTE_NODE_COUNT * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) - -/** - * - * - * This is a count of the number of remote nodes that can be represented in a - * DWROD - */ -#define SCIC_SDS_REMOTE_NODES_PER_DWORD \ - (sizeof(u32) * SCIC_SDS_REMOTE_NODES_PER_BYTE) - -/** - * - * - * This is the number of bits in a remote node group - */ -#define SCIC_SDS_REMOTE_NODES_BITS_PER_GROUP 4 - -#define SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX (0xFFFFFFFF) -#define SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE (0x07) -#define SCIC_SDS_REMOTE_NODE_TABLE_EMPTY_SLOT_VALUE (0x00) - -/** - * - * - * Expander attached sata remote node count - */ -#define SCU_STP_REMOTE_NODE_COUNT 3 - -/** - * - * - * Expander or direct attached ssp remote node count - */ -#define SCU_SSP_REMOTE_NODE_COUNT 1 - -/** - * - * - * Direct attached STP remote node count - */ -#define SCU_SATA_REMOTE_NODE_COUNT 1 - -/** - * struct scic_remote_node_table - - * - * - */ -struct scic_remote_node_table { - /** - * This field contains the array size in dwords - */ - u16 available_nodes_array_size; - - /** - * This field contains the array size of the - */ - u16 group_array_size; - - /** - * This field is the array of available remote node entries in bits. - * Because of the way STP remote node data is allocated on the SCU hardware - * the remote nodes must occupy three consecutive remote node context - * entries. For ease of allocation and de-allocation we have broken the - * sets of three into a single nibble. When the STP RNi is allocated all - * of the bits in the nibble are cleared. This math results in a table size - * of MAX_REMOTE_NODES / CONSECUTIVE RNi ENTRIES for STP / 2 entries per byte. - */ - u32 available_remote_nodes[ - (SCI_MAX_REMOTE_DEVICES / SCIC_SDS_REMOTE_NODES_PER_DWORD) - + ((SCI_MAX_REMOTE_DEVICES % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0)]; - - /** - * This field is the nibble selector for the above table. There are three - * possible selectors each for fast lookup when trying to find one, two or - * three remote node entries. - */ - u32 remote_node_groups[ - SCU_STP_REMOTE_NODE_COUNT][ - (SCI_MAX_REMOTE_DEVICES / (32 * SCU_STP_REMOTE_NODE_COUNT)) - + ((SCI_MAX_REMOTE_DEVICES % (32 * SCU_STP_REMOTE_NODE_COUNT)) != 0)]; - -}; - -/* --------------------------------------------------------------------------- */ - -void scic_sds_remote_node_table_initialize( - struct scic_remote_node_table *remote_node_table, - u32 remote_node_entries); - -u16 scic_sds_remote_node_table_allocate_remote_node( - struct scic_remote_node_table *remote_node_table, - u32 remote_node_count); - -void scic_sds_remote_node_table_release_remote_node_index( - struct scic_remote_node_table *remote_node_table, - u32 remote_node_count, - u16 remote_node_index); - -#endif /* _SCIC_SDS_REMOTE_NODE_TABLE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 63ebbf3..dfb9412 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -59,11 +59,10 @@ #include "intel_sat.h" #include "scic_controller.h" #include "scic_io_request.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" #include "scu_registers.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_smp_request.h" #include "scic_sds_stp_request.h" diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/core/scic_sds_smp_remote_device.c deleted file mode 100644 index cd55c0a..0000000 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ /dev/null @@ -1,315 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "scic_remote_device.h" -#include "scic_sds_controller.h" -#include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_request.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_event_codes.h" -#include "scu_task_context.h" - -/* - * ***************************************************************************** - * * SMP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @[in]: device The device the io is sent to. - * @[in]: request The io to start. - * - * This method will handle the start io operation for a SMP device that is in - * the idle state. enum sci_status - */ -static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - - /* Will the port allow the io request to start? */ - status = device->owning_port->state_handlers->start_io_handler( - device->owning_port, device, request); - - if (status == SCI_SUCCESS) { - status = scic_sds_remote_node_context_start_io(&device->rnc, request); - - if (status == SCI_SUCCESS) - status = scic_sds_request_start(request); - - if (status == SCI_SUCCESS) { - device->working_request = request; - - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD - ); - } - - scic_sds_remote_device_start_request(device, request, status); - } - - return status; -} - - -/* - * ****************************************************************************** - * * SMP REMOTE DEVICE READY SUBSTATE CMD HANDLERS - * ****************************************************************************** */ -/** - * - * @device: This is the device object that is receiving the IO. - * @request: The io to start. - * - * This device is already handling a command it can not accept new commands - * until this one is complete. enum sci_status - */ -static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - return SCI_FAILURE_INVALID_STATE; -} - - -/** - * this is the complete_io_handler for smp device at ready cmd substate. - * @device: This is the device object that is receiving the IO. - * @request: The io to start. - * - * enum sci_status - */ -static enum sci_status -scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - struct scic_sds_request *sci_req; - - sci_req = (struct scic_sds_request *)request; - - status = scic_sds_io_request_complete(sci_req); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - device->owning_port, device, sci_req); - - if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(device); - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE - ); - } else - dev_err(scirdev_to_dev(device), - "%s: SCIC SDS Remote Device 0x%p io request " - "0x%p could not be completd on the port 0x%p " - "failed with status %d.\n", - __func__, - device, - sci_req, - device->owning_port, - status); - } - - return status; -} - -/** - * This is frame handler for smp device ready cmd substate. - * @sci_dev: This is the device object that is receiving the frame. - * @frame_index: The index for the frame received. - * - * enum sci_status - */ -static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status status; - - /* - * / The device does not process any UF received from the hardware while - * / in this state. All unsolicited frames are forwarded to the io request - * / object. */ - status = scic_sds_io_request_frame_handler( - sci_dev->working_request, - frame_index - ); - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[] = { - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, - .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler - } -}; - -/** - * - * @object: This is the struct sci_base_object which is cast into a - * struct scic_sds_remote_device. - * - * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE enter method. - * This function sets the ready cmd substate handlers and reports the device as - * ready. none - */ -static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - SET_STATE_HANDLER(sci_dev, - scic_sds_smp_remote_device_ready_substate_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - - isci_remote_device_ready(ihost, idev); -} - -/** - * - * @object: This is the struct sci_base_object which is cast into a - * struct scic_sds_remote_device. - * - * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD enter method. This - * function sets the remote device objects ready cmd substate handlers, and - * notify core user that the device is not ready. none - */ -static void scic_sds_smp_remote_device_ready_cmd_substate_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - BUG_ON(sci_dev->working_request == NULL); - - SET_STATE_HANDLER(sci_dev, - scic_sds_smp_remote_device_ready_substate_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - - isci_remote_device_not_ready(ihost, idev, - SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); -} - -/** - * - * @object: This is the struct sci_base_object which is cast into a - * struct scic_sds_remote_device. - * - * This is the SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_CMD exit method. none - */ -static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - sci_dev->working_request = NULL; -} - -/* --------------------------------------------------------------------------- */ - -const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[] = { - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, - }, - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, - .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, - }, -}; diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 3274d62..1790f25 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -56,9 +56,8 @@ #include "intel_sas.h" #include "sci_base_state_machine.h" #include "scic_controller.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_smp_request.h" #include "sci_environment.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c index e4d2bf5..1cb77bb 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c @@ -61,9 +61,8 @@ #include "sati_translator_sequence.h" #include "sci_base_state.h" #include "scic_controller.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_stp_packet_request.h" #include "scic_user_callback.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/core/scic_sds_stp_remote_device.c deleted file mode 100644 index 848cb47..0000000 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ /dev/null @@ -1,818 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "intel_ata.h" -#include "intel_sata.h" -#include "intel_sat.h" -#include "sci_base_state.h" -#include "scic_remote_device.h" -#include "scic_sds_controller.h" -#include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_request.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_event_codes.h" - -/** - * This method will perform the STP request completion processing common to IO - * requests and task requests of all types - * @device: This parameter specifies the device for which the request is being - * completed. - * @request: This parameter specifies the request being completed. - * - * This method returns an indication as to whether the request processing - * completed successfully. - */ -static enum sci_status scic_sds_stp_remote_device_complete_request( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - - status = scic_sds_io_request_complete(request); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - device->owning_port, device, request); - - if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(device); - if (request->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - /* - * This request causes hardware error, device needs to be Lun Reset. - * So here we force the state machine to IDLE state so the rest IOs - * can reach RNC state handler, these IOs will be completed by RNC with - * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET - ); - } else if (scic_sds_remote_device_get_request_count(device) == 0) { - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE - ); - } - } - } - - if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(device), - "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " - "could not complete\n", - __func__, - device->owning_port, - device, - request, - status); - - return status; -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY COMMON SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * This is the READY NCQ substate handler to start task management request. In - * this routine, we suspend and resume the RNC. - * @device: The target device a task management request towards to. - * @request: The task request. - * - * enum sci_status Always return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to - * let controller_start_task_handler know that the controller can't post TC for - * task request yet, instead, when RNC gets resumed, a controller_continue_task - * callback will be called. - */ -static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - - /* Will the port allow the io request to start? */ - status = device->owning_port->state_handlers->start_io_handler( - device->owning_port, device, request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_task(&device->rnc, request); - if (status != SCI_SUCCESS) - goto out; - - status = request->state_handlers->start_handler(request); - if (status != SCI_SUCCESS) - goto out; - - /* - * Note: If the remote device state is not IDLE this will replace - * the request that probably resulted in the task management request. - */ - device->working_request = request; - sci_base_state_machine_change_state(&device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - - /* - * The remote node context must cleanup the TCi to NCQ mapping table. - * The only way to do this correctly is to either write to the TLCR - * register or to invalidate and repost the RNC. In either case the - * remote node context state machine will take the correct action when - * the remote node context is suspended and later resumed. - */ - scic_sds_remote_node_context_suspend(&device->rnc, - SCI_SOFTWARE_SUSPENSION, NULL, NULL); - scic_sds_remote_node_context_resume(&device->rnc, - scic_sds_remote_device_continue_request, - device); - -out: - scic_sds_remote_device_start_request(device, request, status); - /* - * We need to let the controller start request handler know that it can't - * post TC yet. We will provide a callback function to post TC when RNC gets - * resumed. - */ - return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * This method will handle the start io operation for a sata device that is in - * the command idle state. - Evalute the type of IO request to be started - - * If its an NCQ request change to NCQ substate - If its any other command - * change to the CMD substate - * @device: - * @request: - * - * If this is a softreset we may want to have a different substate. - * enum sci_status - */ -static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(request); - - - /* Will the port allow the io request to start? */ - status = sci_dev->owning_port->state_handlers->start_io_handler( - sci_dev->owning_port, sci_dev, request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (status != SCI_SUCCESS) - goto out; - - status = request->state_handlers->start_handler(request); - if (status != SCI_SUCCESS) - goto out; - - if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { - sci_base_state_machine_change_state(&sci_dev->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); - } else { - sci_dev->working_request = request; - sci_base_state_machine_change_state(&sci_dev->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - } -out: - scic_sds_remote_device_start_request(sci_dev, request, status); - return status; -} - - -/** - * - * @[in]: device The device received event. - * @[in]: event_code The event code. - * - * This method will handle the event for a sata device that is in the idle - * state. We pick up suspension events to handle specifically to this state. We - * resume the RNC right away. enum sci_status - */ -static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - enum sci_status status; - - status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); - - if (status == SCI_SUCCESS) { - if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX - || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { - status = scic_sds_remote_node_context_resume( - &sci_dev->rnc, NULL, NULL); - } - } - - return status; -} - - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS - * ***************************************************************************** */ - -static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(request); - - if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { - status = sci_dev->owning_port->state_handlers->start_io_handler( - sci_dev->owning_port, - sci_dev, - request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (status != SCI_SUCCESS) - return status; - - status = request->state_handlers->start_handler(request); - - scic_sds_remote_device_start_request(sci_dev, request, status); - } else - status = SCI_FAILURE_INVALID_STATE; - - return status; -} - - -/** - * This method will handle events received while the STP device is in the ready - * command substate. - * @sci_dev: This is the device object that is receiving the event. - * @event_code: The event code to process. - * - * enum sci_status - */ - -static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status status; - struct sata_fis_header *frame_header; - - status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), - frame_index, - (void **)&frame_header - ); - - if (status == SCI_SUCCESS) { - if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS && - (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { - sci_dev->not_ready_reason = - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; - - /* - * / @todo Check sactive and complete associated IO - * if any. - */ - - sci_base_state_machine_change_state( - &sci_dev->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR - ); - } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H && - (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { - - /* - * Some devices return D2H FIS when an NCQ error is detected. - * Treat this like an SDB error FIS ready reason. - */ - sci_dev->not_ready_reason = - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; - - sci_base_state_machine_change_state( - &sci_dev->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR - ); - } else { - status = SCI_FAILURE; - } - - scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(sci_dev), frame_index - ); - } - - return status; -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY CMD SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * This device is already handling a command it can not accept new commands - * until this one is complete. - * @device: - * @request: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type) -{ - enum sci_status status; - - status = scic_sds_remote_node_context_suspend(&sci_dev->rnc, - suspend_type, NULL, NULL); - - return status; -} - -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status status; - - /* - * / The device doe not process any UF received from the hardware while - * / in this state. All unsolicited frames are forwarded to the io request - * / object. */ - status = scic_sds_io_request_frame_handler( - sci_dev->working_request, - frame_index - ); - - return status; -} - - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS - * ***************************************************************************** */ - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY NCQ ERROR SUBSTATE HANDLERS - * ***************************************************************************** */ - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE HANDLERS - * ***************************************************************************** */ -static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; -} - - - -/** - * This method will perform the STP request (both io or task) completion - * processing for await reset state. - * @device: This parameter specifies the device for which the request is being - * completed. - * @request: This parameter specifies the request being completed. - * - * This method returns an indication as to whether the request processing - * completed successfully. - */ -static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - struct scic_sds_request *sci_req = (struct scic_sds_request *)request; - enum sci_status status; - - status = scic_sds_io_request_complete(sci_req); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - device->owning_port, device, sci_req - ); - - if (status == SCI_SUCCESS) - scic_sds_remote_device_decrement_request_count(device); - } - - if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(device), - "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " - "could not complete\n", - __func__, - device->owning_port, - device, - sci_req, - status); - - return status; -} - -#if !defined(DISABLE_ATAPI) -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY ATAPI ERROR SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @[in]: device The device received event. - * @[in]: event_code The event code. - * - * This method will handle the event for a ATAPI device that is in the ATAPI - * ERROR state. We pick up suspension events to handle specifically to this - * state. We resume the RNC right away. We then complete the outstanding IO to - * this device. enum sci_status - */ -enum sci_status scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - enum sci_status status; - - status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); - - if (status == SCI_SUCCESS) { - if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX - || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { - status = scic_sds_remote_node_context_resume( - sci_dev->rnc, - sci_dev->working_request->state_handlers->parent.complete_handler, - (void *)sci_dev->working_request - ); - } - } - - return status; -} -#endif /* !defined(DISABLE_ATAPI) */ - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = { - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, - .complete_io_handler = scic_sds_stp_remote_device_complete_request, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, - .complete_io_handler = scic_sds_stp_remote_device_complete_request, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_stp_remote_device_complete_request, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, -#if !defined(DISABLE_ATAPI) - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_stp_remote_device_complete_request, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, -#endif - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, - .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - } -}; - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY SUBSTATE PRIVATE METHODS - * ***************************************************************************** */ - -static void -scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *user_cookie) -{ - struct scic_sds_remote_device *sci_dev = user_cookie; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - - /* - * For NCQ operation we do not issue a - * scic_cb_remote_device_not_ready(). As a result, avoid sending - * the ready notification. - */ - if (sci_dev->ready_substate_machine.previous_state_id != - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) - isci_remote_device_ready(ihost, idev); -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY IDLE SUBSTATE - * ***************************************************************************** */ - -/** - * - * @device: This is the SCI base object which is cast into a - * struct scic_sds_remote_device object. - * - */ -static void scic_sds_stp_remote_device_ready_idle_substate_enter( - struct sci_base_object *device) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)device; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE - ); - - sci_dev->working_request = NULL; - - if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { - /* - * Since the RNC is ready, it's alright to finish completion - * processing (e.g. signal the remote device is ready). */ - scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( - sci_dev - ); - } else { - scic_sds_remote_node_context_resume( - &sci_dev->rnc, - scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, - sci_dev); - } -} - -static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - BUG_ON(sci_dev->working_request == NULL); - - SET_STATE_HANDLER(sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - - isci_remote_device_not_ready(ihost, idev, - SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); -} - -static void scic_sds_stp_remote_device_ready_ncq_substate_enter(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - SET_STATE_HANDLER(sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); -} - -static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - SET_STATE_HANDLER(sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); - - if (sci_dev->not_ready_reason == - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) - isci_remote_device_not_ready(ihost, idev, sci_dev->not_ready_reason); -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE - * ***************************************************************************** */ - -/** - * The enter routine to READY AWAIT RESET substate. - * @device: This is the SCI base object which is cast into a - * struct scic_sds_remote_device object. - * - */ -static void scic_sds_stp_remote_device_ready_await_reset_substate_enter( - struct sci_base_object *device) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)device; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET - ); -} - -#if !defined(DISABLE_ATAPI) -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY ATAPI ERROR SUBSTATE - * ***************************************************************************** */ - -/** - * The enter routine to READY ATAPI ERROR substate. - * @device: This is the SCI base object which is cast into a - * struct scic_sds_remote_device object. - * - */ -void scic_sds_stp_remote_device_ready_atapi_error_substate_enter( - struct sci_base_object *device) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)device; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR - ); -} -#endif /* !defined(DISABLE_ATAPI) */ - -/* --------------------------------------------------------------------------- */ - -const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[] = { - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter, - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, - }, -#if !defined(DISABLE_ATAPI) - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { - .enter_state = scic_sds_stp_remote_device_ready_atapi_error_substate_enter, - }, -#endif - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter, - }, -}; diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index ab01f8d..59c5f1b 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -60,9 +60,8 @@ #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_io_request.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_stp_pio_request.h" #include "scic_sds_stp_request.h" diff --git a/drivers/scsi/isci/core/scu_remote_node_context.h b/drivers/scsi/isci/core/scu_remote_node_context.h deleted file mode 100644 index 33745ad..0000000 --- a/drivers/scsi/isci/core/scu_remote_node_context.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef __SCU_REMOTE_NODE_CONTEXT_HEADER__ -#define __SCU_REMOTE_NODE_CONTEXT_HEADER__ - -/** - * This file contains the structures and constatns used by the SCU hardware to - * describe a remote node context. - * - * - */ - -/** - * struct ssp_remote_node_context - This structure contains the SCU hardware - * definition for an SSP remote node. - * - * - */ -struct ssp_remote_node_context { - /* WORD 0 */ - - /** - * This field is the remote node index assigned for this remote node. All - * remote nodes must have a unique remote node index. The value of the remote - * node index can not exceed the maximum number of remote nodes reported in - * the SCU device context capacity register. - */ - u32 remote_node_index:12; - u32 reserved0_1:4; - - /** - * This field tells the SCU hardware how many simultaneous connections that - * this remote node will support. - */ - u32 remote_node_port_width:4; - - /** - * This field tells the SCU hardware which logical port to associate with this - * remote node. - */ - u32 logical_port_index:3; - u32 reserved0_2:5; - - /** - * This field will enable the I_T nexus loss timer for this remote node. - */ - u32 nexus_loss_timer_enable:1; - - /** - * This field is the for driver debug only and is not used. - */ - u32 check_bit:1; - - /** - * This field must be set to true when the hardware DMAs the remote node - * context to the hardware SRAM. When the remote node is being invalidated - * this field must be set to false. - */ - u32 is_valid:1; - - /** - * This field must be set to true. - */ - u32 is_remote_node_context:1; - - /* WORD 1 - 2 */ - - /** - * This is the low word of the remote device SAS Address - */ - u32 remote_sas_address_lo; - - /** - * This field is the high word of the remote device SAS Address - */ - u32 remote_sas_address_hi; - - /* WORD 3 */ - /** - * This field reprensets the function number assigned to this remote device. - * This value must match the virtual function number that is being used to - * communicate to the device. - */ - u32 function_number:8; - u32 reserved3_1:8; - - /** - * This field provides the driver a way to cheat on the arbitration wait time - * for this remote node. - */ - u32 arbitration_wait_time:16; - - /* WORD 4 */ - /** - * This field tells the SCU hardware how long this device may occupy the - * connection before it must be closed. - */ - u32 connection_occupancy_timeout:16; - - /** - * This field tells the SCU hardware how long to maintain a connection when - * there are no frames being transmitted on the link. - */ - u32 connection_inactivity_timeout:16; - - /* WORD 5 */ - /** - * This field allows the driver to cheat on the arbitration wait time for this - * remote node. - */ - u32 initial_arbitration_wait_time:16; - - /** - * This field is tells the hardware what to program for the connection rate in - * the open address frame. See the SAS spec for valid values. - */ - u32 oaf_connection_rate:4; - - /** - * This field tells the SCU hardware what to program for the features in the - * open address frame. See the SAS spec for valid values. - */ - u32 oaf_features:4; - - /** - * This field tells the SCU hardware what to use for the source zone group in - * the open address frame. See the SAS spec for more details on zoning. - */ - u32 oaf_source_zone_group:8; - - /* WORD 6 */ - /** - * This field tells the SCU hardware what to use as the more capibilities in - * the open address frame. See the SAS Spec for details. - */ - u32 oaf_more_compatibility_features; - - /* WORD 7 */ - u32 reserved7; - -}; - -/** - * struct stp_remote_node_context - This structure contains the SCU hardware - * definition for a STP remote node. - * - * STP Targets are not yet supported so this definition is a placeholder until - * we do support them. - */ -struct stp_remote_node_context { - /** - * Placeholder data for the STP remote node. - */ - u32 data[8]; - -}; - -/** - * This union combines the SAS and SATA remote node definitions. - * - * union scu_remote_node_context - */ -union scu_remote_node_context { - /** - * SSP Remote Node - */ - struct ssp_remote_node_context ssp; - - /** - * STP Remote Node - */ - struct stp_remote_node_context stp; - -}; - -#endif /* __SCU_REMOTE_NODE_CONTEXT_HEADER__ */ diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 3aceb92..676bcdb 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -55,14 +55,12 @@ #include "isci.h" #include "scic_io_request.h" -#include "scic_remote_device.h" #include "scic_port.h" - #include "port.h" #include "request.h" #include "host.h" #include "probe_roms.h" -#include "core/scic_sds_controller.h" +#include "scic_sds_controller.h" irqreturn_t isci_msix_isr(int vec, void *data) { diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 21bd7d8..8dc8d1c 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -61,7 +61,6 @@ /*#include "task.h"*/ #include "timers.h" #include "remote_device.h" -#include "scic_remote_device.h" #define DRV_NAME "isci" #define SCI_PCI_BAR_COUNT 2 diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index a23ea2c..f7ca9e8 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -62,7 +62,6 @@ #include "isci.h" #include "task.h" #include "sci_controller_constants.h" -#include "scic_remote_device.h" #include "sci_environment.h" #include "probe_roms.h" diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index cf78cf0..430b29e 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -63,7 +63,6 @@ #include #include "isci.h" #include "scic_io_request.h" -#include "scic_remote_device.h" #include "scic_phy.h" #include "scic_sds_phy.h" #include "scic_port.h" diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 76546fd..eeac7bb 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -64,6 +64,7 @@ struct isci_phy; struct isci_host; +struct scic_sds_phy; enum isci_status { diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 2df8d8e..933d811 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -33,7 +33,6 @@ #include "isci.h" #include "task.h" #include "sci_controller_constants.h" -#include "scic_remote_device.h" #include "sci_environment.h" #include "probe_roms.h" diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 1553221..6b9ea90 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -52,18 +52,1169 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "intel_sas.h" +#include "isci.h" +#include "port.h" +#include "remote_device.h" +#include "request.h" +#include "scic_controller.h" +#include "scic_io_request.h" +#include "scic_phy.h" +#include "scic_port.h" +#include "scic_sds_controller.h" +#include "scic_sds_phy.h" +#include "scic_sds_port.h" +#include "remote_node_context.h" +#include "scic_sds_request.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_event_codes.h" +#include "task.h" + +enum sci_status scic_remote_device_stop( + struct scic_sds_remote_device *sci_dev, + u32 timeout) +{ + return sci_dev->state_handlers->stop_handler(sci_dev); +} + + +enum sci_status scic_remote_device_reset( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->reset_handler(sci_dev); +} + + +enum sci_status scic_remote_device_reset_complete( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->reset_complete_handler(sci_dev); +} + + +enum sas_linkrate scic_remote_device_get_connection_rate( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->connection_rate; +} + + +void scic_remote_device_get_protocols( + struct scic_sds_remote_device *sci_dev, + struct smp_discover_response_protocols *pr) +{ + pr->u.all = sci_dev->target_protocols.u.all; +} + +#if !defined(DISABLE_ATAPI) +bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->is_atapi; +} +#endif + + +/** + * + * + * Remote device timer requirements + */ +#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0) +#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES) + + +/** + * + * @sci_dev: The remote device for which the suspend is being requested. + * + * This method invokes the remote device suspend state handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_suspend( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type) +{ + return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type); +} + +/** + * + * @sci_dev: The remote device for which the event handling is being + * requested. + * @frame_index: This is the frame index that is being processed. + * + * This method invokes the frame handler for the remote device state machine + * enum sci_status + */ +enum sci_status scic_sds_remote_device_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + return sci_dev->state_handlers->frame_handler(sci_dev, frame_index); +} + +/** + * + * @sci_dev: The remote device for which the event handling is being + * requested. + * @event_code: This is the event code that is to be processed. + * + * This method invokes the remote device event handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + return sci_dev->state_handlers->event_handler(sci_dev, event_code); +} + +/** + * + * @controller: The controller that is starting the io request. + * @sci_dev: The remote device for which the start io handling is being + * requested. + * @io_request: The io request that is being started. + * + * This method invokes the remote device start io handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_start_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request) +{ + return sci_dev->state_handlers->start_io_handler( + sci_dev, io_request); +} + +/** + * + * @controller: The controller that is completing the io request. + * @sci_dev: The remote device for which the complete io handling is being + * requested. + * @io_request: The io request that is being completed. + * + * This method invokes the remote device complete io handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_complete_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request) +{ + return sci_dev->state_handlers->complete_io_handler( + sci_dev, io_request); +} + +/** + * + * @controller: The controller that is starting the task request. + * @sci_dev: The remote device for which the start task handling is being + * requested. + * @io_request: The task request that is being started. + * + * This method invokes the remote device start task handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_start_task( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request) +{ + return sci_dev->state_handlers->start_task_handler( + sci_dev, io_request); +} + +/** + * + * @controller: The controller that is completing the task request. + * @sci_dev: The remote device for which the complete task handling is + * being requested. + * @io_request: The task request that is being completed. + * + * This method invokes the remote device complete task handler. enum sci_status + */ + +/** + * + * @sci_dev: + * @request: + * + * This method takes the request and bulids an appropriate SCU context for the + * request and then requests the controller to post the request. none + */ +void scic_sds_remote_device_post_request( + struct scic_sds_remote_device *sci_dev, + u32 request) +{ + u32 context; + + context = scic_sds_remote_device_build_command_context(sci_dev, request); + + scic_sds_controller_post_request( + scic_sds_remote_device_get_controller(sci_dev), + context + ); +} + +#if !defined(DISABLE_ATAPI) +/** + * + * @sci_dev: The device to be checked. + * + * This method check the signature fis of a stp device to decide whether a + * device is atapi or not. true if a device is atapi device. False if a device + * is not atapi. + */ +bool scic_sds_remote_device_is_atapi( + struct scic_sds_remote_device *sci_dev) +{ + if (!sci_dev->target_protocols.u.bits.attached_stp_target) + return false; + else if (sci_dev->is_direct_attached) { + struct scic_sds_phy *phy; + struct scic_sata_phy_properties properties; + struct sata_fis_reg_d2h *signature_fis; + phy = scic_sds_port_get_a_connected_phy(sci_dev->owning_port); + scic_sata_phy_get_properties(phy, &properties); + + /* decode the signature fis. */ + signature_fis = &(properties.signature_fis); + + if ((signature_fis->sector_count == 0x01) + && (signature_fis->lba_low == 0x01) + && (signature_fis->lba_mid == 0x14) + && (signature_fis->lba_high == 0xEB) + && ((signature_fis->device & 0x5F) == 0x00) + ) { + /* An ATA device supporting the PACKET command set. */ + return true; + } else + return false; + } else { + /* Expander supported ATAPI device is not currently supported. */ + return false; + } +} +#endif + +/** + * + * @user_parameter: This is cast to a remote device object. + * + * This method is called once the remote node context is ready to be freed. + * The remote device can now report that its stop operation is complete. none + */ +static void scic_sds_cb_remote_device_rnc_destruct_complete( + void *user_parameter) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = (struct scic_sds_remote_device *)user_parameter; + + BUG_ON(sci_dev->started_request_count != 0); + + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); +} + +/** + * + * @user_parameter: This is cast to a remote device object. + * + * This method is called once the remote node context has transisitioned to a + * ready state. This is the indication that the remote device object can also + * transition to ready. none + */ +static void scic_sds_remote_device_resume_complete_handler( + void *user_parameter) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = (struct scic_sds_remote_device *)user_parameter; + + if ( + sci_base_state_machine_get_state(&sci_dev->state_machine) + != SCI_BASE_REMOTE_DEVICE_STATE_READY + ) { + sci_base_state_machine_change_state( + &sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY + ); + } +} + +/** + * + * @device: This parameter specifies the device for which the request is being + * started. + * @request: This parameter specifies the request being started. + * @status: This parameter specifies the current start operation status. + * + * This method will perform the STP request start processing common to IO + * requests and task requests of all types. none + */ +void scic_sds_remote_device_start_request( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req, + enum sci_status status) +{ + /* We still have a fault in starting the io complete it on the port */ + if (status == SCI_SUCCESS) + scic_sds_remote_device_increment_request_count(sci_dev); + else{ + sci_dev->owning_port->state_handlers->complete_io_handler( + sci_dev->owning_port, sci_dev, sci_req + ); + } +} + + +/** + * + * @request: This parameter specifies the request being continued. + * + * This method will continue to post tc for a STP request. This method usually + * serves as a callback when RNC gets resumed during a task management + * sequence. none + */ +void scic_sds_remote_device_continue_request(void *dev) +{ + struct scic_sds_remote_device *sci_dev = dev; + + /* we need to check if this request is still valid to continue. */ + if (sci_dev->working_request) + scic_controller_continue_io(sci_dev->working_request); +} + +/** + * This method will terminate all of the IO requests in the controllers IO + * request table that were targeted for this device. + * @sci_dev: This parameter specifies the remote device for which to + * attempt to terminate all requests. + * + * This method returns an indication as to whether all requests were + * successfully terminated. If a single request fails to be terminated, then + * this method will return the failure. + */ +static enum sci_status scic_sds_remote_device_terminate_requests( + struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status = SCI_SUCCESS; + enum sci_status terminate_status = SCI_SUCCESS; + struct scic_sds_request *sci_req; + u32 index; + u32 request_count = sci_dev->started_request_count; + + for (index = 0; + (index < SCI_MAX_IO_REQUESTS) && (request_count > 0); + index++) { + sci_req = sci_dev->owning_port->owning_controller->io_request_table[index]; + + if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) { + terminate_status = scic_controller_terminate_request( + sci_dev->owning_port->owning_controller, + sci_dev, + sci_req + ); + + if (terminate_status != SCI_SUCCESS) + status = terminate_status; + + request_count--; + } + } + + return status; +} + +static enum sci_status +default_device_handler(struct scic_sds_remote_device *sci_dev, + const char *func) +{ + dev_warn(scirdev_to_dev(sci_dev), + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&sci_dev->state_machine)); + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status scic_sds_remote_device_default_start_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +static enum sci_status scic_sds_remote_device_default_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_fail_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_destruct_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_reset_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_reset_complete_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_suspend_handler( + struct scic_sds_remote_device *sci_dev, u32 suspend_type) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_resume_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +/** + * + * @device: The struct scic_sds_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @event_code: The event code that the struct scic_sds_controller wants the device + * object to process. + * + * This method is the default event handler. It will call the RNC state + * machine handler for any RNC events otherwise it will log a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_remote_device_core_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code, + bool is_ready_state) +{ + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_OPS_MISC: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); + break; + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + + if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { + status = SCI_SUCCESS; + + /* Suspend the associated RNC */ + scic_sds_remote_node_context_suspend(&sci_dev->rnc, + SCI_SOFTWARE_SUSPENSION, + NULL, NULL); + + dev_dbg(scirdev_to_dev(sci_dev), + "%s: device: %p event code: %x: %s\n", + __func__, sci_dev, event_code, + (is_ready_state) + ? "I_T_Nexus_Timeout event" + : "I_T_Nexus_Timeout event in wrong state"); + + break; + } + /* Else, fall through and treat as unhandled... */ + + default: + dev_dbg(scirdev_to_dev(sci_dev), + "%s: device: %p event code: %x: %s\n", + __func__, sci_dev, event_code, + (is_ready_state) + ? "unexpected event" + : "unexpected event in wrong state"); + status = SCI_FAILURE_INVALID_STATE; + break; + } + + return status; +} +/** + * + * @device: The struct scic_sds_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @event_code: The event code that the struct scic_sds_controller wants the device + * object to process. + * + * This method is the default event handler. It will call the RNC state + * machine handler for any RNC events otherwise it will log a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_remote_device_default_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + return scic_sds_remote_device_core_event_handler(sci_dev, + event_code, + false); +} + +/** + * + * @device: The struct scic_sds_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @frame_index: The frame index for which the struct scic_sds_controller wants this + * device object to process. + * + * This method is the default unsolicited frame handler. It logs a warning, + * releases the frame and returns a failure. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + dev_warn(scirdev_to_dev(sci_dev), + "%s: SCIC Remote Device requested to handle frame %x " + "while in wrong state %d\n", + __func__, + frame_index, + sci_base_state_machine_get_state( + &sci_dev->state_machine)); + + /* Return the frame back to the controller */ + scic_sds_controller_release_frame( + scic_sds_remote_device_get_controller(sci_dev), frame_index + ); + + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status scic_sds_remote_device_default_start_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_complete_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_continue_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + return default_device_handler(sci_dev, __func__); +} + +/** + * + * @device: The struct scic_sds_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @frame_index: The frame index for which the struct scic_sds_controller wants this + * device object to process. + * + * This method is a general ssp frame handler. In most cases the device object + * needs to route the unsolicited frame processing to the io request object. + * This method decodes the tag for the io request object and routes the + * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_general_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + enum sci_status result; + struct sci_ssp_frame_header *frame_header; + struct scic_sds_request *io_request; + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), + frame_index, + (void **)&frame_header + ); + + if (SCI_SUCCESS == result) { + io_request = scic_sds_controller_get_io_request_from_tag( + scic_sds_remote_device_get_controller(sci_dev), frame_header->tag); + + if ((io_request == NULL) + || (io_request->target_device != sci_dev)) { + /* + * We could not map this tag to a valid IO request + * Just toss the frame and continue */ + scic_sds_controller_release_frame( + scic_sds_remote_device_get_controller(sci_dev), frame_index + ); + } else { + /* The IO request is now in charge of releasing the frame */ + result = io_request->state_handlers->frame_handler( + io_request, frame_index); + } + } + + return result; +} + +/** + * + * @[in]: sci_dev This is the device object that is receiving the event. + * @[in]: event_code The event code to process. + * + * This is a common method for handling events reported to the remote device + * from the controller object. enum sci_status + */ +enum sci_status scic_sds_remote_device_general_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + return scic_sds_remote_device_core_event_handler(sci_dev, + event_code, + true); +} + +/* + * ***************************************************************************** + * * STOPPED STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @device: + * + * This method takes the struct scic_sds_remote_device from a stopped state and + * attempts to start it. The RNC buffer for the device is constructed and the + * device state machine is transitioned to the + * SCIC_BASE_REMOTE_DEVICE_STATE_STARTING. enum sci_status SCI_SUCCESS if there is + * an RNC buffer available to construct the remote device. + * SCI_FAILURE_INSUFFICIENT_RESOURCES if there is no RNC buffer available in + * which to construct the remote device. + */ +static enum sci_status scic_sds_remote_device_stopped_state_start_handler( + struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status; + + status = scic_sds_remote_node_context_resume(&sci_dev->rnc, + scic_sds_remote_device_resume_complete_handler, sci_dev); + + if (status == SCI_SUCCESS) + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STARTING); + + return status; +} + +static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + return SCI_SUCCESS; +} + +/** + * + * @sci_dev: The struct scic_sds_remote_device which is cast into a + * struct scic_sds_remote_device. + * + * This method will destruct a struct scic_sds_remote_device that is in a stopped + * state. This is the only state from which a destruct request will succeed. + * The RNi for this struct scic_sds_remote_device is returned to the free pool and the + * device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( + struct scic_sds_remote_device *sci_dev) +{ + struct scic_sds_controller *scic; + + scic = scic_sds_remote_device_get_controller(sci_dev); + scic_sds_controller_free_remote_node_context(scic, sci_dev, + sci_dev->rnc.remote_node_index); + sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_FINAL); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * STARTING STATE HANDLERS + * ***************************************************************************** */ + +static enum sci_status scic_sds_remote_device_starting_state_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + /* + * This device has not yet started so there had better be no IO requests + */ + BUG_ON(sci_dev->started_request_count != 0); + + /* + * Destroy the remote node context + */ + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); + + /* + * Transition to the stopping state and wait for the remote node to + * complete being posted and invalidated. + */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + + return SCI_SUCCESS; +} + +enum sci_status scic_sds_remote_device_ready_state_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status = SCI_SUCCESS; + + /* Request the parent state machine to transition to the stopping state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + + if (sci_dev->started_request_count == 0) { + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, + sci_dev); + } else + status = scic_sds_remote_device_terminate_requests(sci_dev); + + return status; +} + +/** + * + * @device: The struct scic_sds_remote_device object which is cast to a + * struct scic_sds_remote_device object. + * + * This is the ready state device reset handler enum sci_status + */ +enum sci_status scic_sds_remote_device_ready_state_reset_handler( + struct scic_sds_remote_device *sci_dev) +{ + /* Request the parent state machine to transition to the stopping state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); + + return SCI_SUCCESS; +} + +/* + * This method will attempt to start a task request for this device object. The + * remote device object will issue the start request for the task and if + * successful it will start the request for the port object then increment its + * own requet count. enum sci_status SCI_SUCCESS if the task request is started for + * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request + * object could not get the resources to start. + */ +static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status result; + + /* See if the port is in a state where we can start the IO request */ + result = scic_sds_port_start_io( + scic_sds_remote_device_get_port(sci_dev), sci_dev, request); + + if (result == SCI_SUCCESS) { + result = scic_sds_remote_node_context_start_task(&sci_dev->rnc, + request); + if (result == SCI_SUCCESS) + result = scic_sds_request_start(request); + + scic_sds_remote_device_start_request(sci_dev, request, result); + } + + return result; +} + +/* + * This method will attempt to start an io request for this device object. The + * remote device object will issue the start request for the io and if + * successful it will start the request for the port object then increment its + * own requet count. enum sci_status SCI_SUCCESS if the io request is started for + * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request + * object could not get the resources to start. + */ +static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status result; + + /* See if the port is in a state where we can start the IO request */ + result = scic_sds_port_start_io( + scic_sds_remote_device_get_port(sci_dev), sci_dev, request); + + if (result == SCI_SUCCESS) { + result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); + if (result == SCI_SUCCESS) + result = scic_sds_request_start(request); + + scic_sds_remote_device_start_request(sci_dev, request, result); + } + + return result; +} + +/* + * This method will complete the request for the remote device object. The + * method will call the completion handler for the request object and if + * successful it will complete the request on the port object then decrement + * its own started_request_count. enum sci_status + */ +static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status result; + + result = scic_sds_request_complete(request); + + if (result != SCI_SUCCESS) + return result; + + /* See if the port is in a state + * where we can start the IO request */ + result = scic_sds_port_complete_io( + scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); + + if (result == SCI_SUCCESS) + scic_sds_remote_device_decrement_request_count(sci_dev); + + return result; +} + +/* + * ***************************************************************************** + * * STOPPING STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @sci_dev: The struct scic_sds_remote_device which is cast into a + * struct scic_sds_remote_device. + * + * This method will stop a struct scic_sds_remote_device that is already in the + * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error + * since we allow a stop request on a device that is alreay stopping or + * stopped. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( + struct scic_sds_remote_device *device) +{ + /* + * All requests should have been terminated, but if there is an + * attempt to stop a device already in the stopping state, then + * try again to terminate. */ + return scic_sds_remote_device_terminate_requests(device); +} -#include "isci.h" -#include "scic_io_request.h" -#include "scic_remote_device.h" -#include "scic_phy.h" -#include "scic_port.h" -#include "port.h" -#include "remote_device.h" -#include "request.h" -#include "task.h" +/** + * + * @device: The device object for which the request is completing. + * @request: The task request that is being completed. + * + * This method completes requests for this struct scic_sds_remote_device while it is + * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the + * complete method for the request object and if that is successful the port + * object is called to complete the task request. Then the device object itself + * completes the task request. If struct scic_sds_remote_device started_request_count + * goes to 0 and the invalidate RNC request has completed the device object can + * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status + */ +static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status status = SCI_SUCCESS; + + status = scic_sds_request_complete(request); + + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); + if (status != SCI_SUCCESS) + return status; + + scic_sds_remote_device_decrement_request_count(sci_dev); + + if (scic_sds_remote_device_get_request_count(sci_dev) == 0) + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, + sci_dev); + return SCI_SUCCESS; +} + +/** + * + * @device: The struct scic_sds_remote_device which is to be cast into a + * struct scic_sds_remote_device object. + * + * This method will complete the reset operation when the device is in the + * resetting state. enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( + struct scic_sds_remote_device *sci_dev) +{ + + sci_base_state_machine_change_state( + &sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY + ); + + return SCI_SUCCESS; +} + +/** + * + * @device: The struct scic_sds_remote_device which is to be cast into a + * struct scic_sds_remote_device object. + * + * This method will stop the remote device while in the resetting state. + * enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + sci_base_state_machine_change_state( + &sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/* + * This method completes requests for this struct scic_sds_remote_device while it is + * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the + * complete method for the request object and if that is successful the port + * object is called to complete the task request. Then the device object itself + * completes the task request. enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status status = SCI_SUCCESS; + + status = scic_sds_request_complete(request); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); + + if (status == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(sci_dev); + } + } + + return status; +} + +static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { + [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { + .start_handler = scic_sds_remote_device_stopped_state_start_handler, + .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_starting_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, + .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, + .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + } +}; + +static void scic_sds_remote_device_initial_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + sci_dev = container_of(object, typeof(*sci_dev), parent); + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); + + /* Initial state is a transitional state to the stopped state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); +} + +/** + * isci_remote_device_change_state() - This function gets the status of the + * remote_device object. + * @isci_device: This parameter points to the isci_remote_device object + * + * status of the object as a isci_status enum. + */ +void isci_remote_device_change_state( + struct isci_remote_device *isci_device, + enum isci_status status) +{ + unsigned long flags; + + spin_lock_irqsave(&isci_device->state_lock, flags); + isci_device->status = status; + spin_unlock_irqrestore(&isci_device->state_lock, flags); +} +/** + * scic_remote_device_destruct() - free remote node context and destruct + * @remote_device: This parameter specifies the remote device to be destructed. + * + * Remote device objects are a limited resource. As such, they must be + * protected. Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. The return value shall indicate if the device was + * successfully destructed or if some failure occurred. enum sci_status This value + * is returned if the device is successfully destructed. + * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied + * device isn't valid (e.g. it's already been destoryed, the handle isn't + * valid, etc.). + */ +static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->destruct_handler(sci_dev); +} /** * isci_remote_device_deconstruct() - This function frees an isci_remote_device. @@ -98,6 +1249,418 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ wake_up(&ihost->eventq); } +/** + * isci_remote_device_stop_complete() - This function is called by the scic + * when the remote device stop has completed. We mark the isci device as not + * ready and remove the isci remote device. + * @ihost: This parameter specifies the isci host object. + * @idev: This parameter specifies the remote device. + * @status: This parameter specifies status of the completion. + * + */ +static void isci_remote_device_stop_complete(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + dev_dbg(&ihost->pdev->dev, "%s: complete idev = %p\n", __func__, idev); + + isci_remote_device_change_state(idev, isci_stopped); + + /* after stop, we can tear down resources. */ + isci_remote_device_deconstruct(ihost, idev); +} + +static void scic_sds_remote_device_stopped_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev; + struct scic_sds_controller *scic; + struct isci_remote_device *idev; + struct isci_host *ihost; + u32 prev_state; + + sci_dev = container_of(object, typeof(*sci_dev), parent); + scic = scic_sds_remote_device_get_controller(sci_dev); + ihost = sci_object_get_association(scic); + idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); + + /* If we are entering from the stopping state let the SCI User know that + * the stop operation has completed. + */ + prev_state = sci_dev->state_machine.previous_state_id; + if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) + isci_remote_device_stop_complete(ihost, idev); + + scic_sds_controller_remote_device_stopped(scic, sci_dev); +} + +static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STARTING); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); +} + +static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_READY); + + scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; + + if (sci_dev->has_ready_substate_machine) + sci_base_state_machine_start(&sci_dev->ready_substate_machine); + else + isci_remote_device_ready(ihost, idev); +} + +static void scic_sds_remote_device_ready_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + if (sci_dev->has_ready_substate_machine) + sci_base_state_machine_stop(&sci_dev->ready_substate_machine); + else { + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); + } +} + +static void scic_sds_remote_device_stopping_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING + ); +} + +static void scic_sds_remote_device_failed_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_FAILED + ); +} + +static void scic_sds_remote_device_resetting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING + ); + + scic_sds_remote_node_context_suspend( + &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); +} + +static void scic_sds_remote_device_resetting_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); +} + +static void scic_sds_remote_device_final_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_FINAL + ); +} + + +static const struct sci_base_state scic_sds_remote_device_state_table[] = { + [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { + .enter_state = scic_sds_remote_device_initial_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { + .enter_state = scic_sds_remote_device_stopped_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { + .enter_state = scic_sds_remote_device_starting_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { + .enter_state = scic_sds_remote_device_ready_state_enter, + .exit_state = scic_sds_remote_device_ready_state_exit + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { + .enter_state = scic_sds_remote_device_stopping_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { + .enter_state = scic_sds_remote_device_failed_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { + .enter_state = scic_sds_remote_device_resetting_state_enter, + .exit_state = scic_sds_remote_device_resetting_state_exit + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { + .enter_state = scic_sds_remote_device_final_state_enter, + }, +}; + +/** + * scic_remote_device_construct() - This method will perform the construction + * common to all remote device objects. + * @sci_port: SAS/SATA port through which this device is accessed. + * @sci_dev: remote device to construct + * + * It isn't necessary to call scic_remote_device_destruct() for device objects + * that have only called this method for construction. Once subsequent + * construction methods have been invoked (e.g. + * scic_remote_device_da_construct()), then destruction should occur. none + */ +static void scic_remote_device_construct(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev) +{ + sci_dev->owning_port = sci_port; + sci_dev->started_request_count = 0; + sci_dev->parent.private = NULL; + + sci_base_state_machine_construct( + &sci_dev->state_machine, + &sci_dev->parent, + scic_sds_remote_device_state_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL + ); + + sci_base_state_machine_start( + &sci_dev->state_machine + ); + + scic_sds_remote_node_context_construct(&sci_dev->rnc, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); + + sci_object_set_association(&sci_dev->rnc, sci_dev); +} + +/** + * scic_remote_device_da_construct() - This method will construct a + * SCIC_REMOTE_DEVICE object for a direct attached (da) device. The + * information (e.g. IAF, Signature FIS, etc.) necessary to build the device + * is known to the SCI Core since it is contained in the scic_phy object. + * @remote_device: This parameter specifies the remote device to be destructed. + * + * The user must have previously called scic_remote_device_construct() Remote + * device objects are a limited resource. As such, they must be protected. + * Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. Indicate if the remote device was successfully constructed. + * SCI_SUCCESS Returned if the device was successfully constructed. + * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been + * constructed. If it's an additional phy for the target, then call + * scic_remote_device_da_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned + * if the supplied parameters necessitate creation of a remote device for which + * the protocol is not supported by the underlying controller hardware. + * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core + * controller associated with the supplied parameters is unable to support + * additional remote devices. + */ +static enum sci_status scic_remote_device_da_construct(struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status; + u16 remote_node_index; + struct sci_sas_identify_address_frame_protocols protocols; + + /* + * This information is request to determine how many remote node context + * entries will be needed to store the remote node. + */ + scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols); + sci_dev->target_protocols.u.all = protocols.u.all; + sci_dev->is_direct_attached = true; +#if !defined(DISABLE_ATAPI) + sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev); +#endif + + status = scic_sds_controller_allocate_remote_node_context( + sci_dev->owning_port->owning_controller, + sci_dev, + &remote_node_index); + + if (status == SCI_SUCCESS) { + sci_dev->rnc.remote_node_index = remote_node_index; + + scic_sds_port_get_attached_sas_address( + sci_dev->owning_port, &sci_dev->device_address); + + if (sci_dev->target_protocols.u.bits.attached_ssp_target) { + sci_dev->has_ready_substate_machine = false; + } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { + sci_dev->has_ready_substate_machine = true; + + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent, + scic_sds_stp_remote_device_ready_substate_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { + sci_dev->has_ready_substate_machine = true; + + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent, + scic_sds_smp_remote_device_ready_substate_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } + + sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed( + sci_dev->owning_port); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; + } + + return status; +} + +static void scic_sds_remote_device_get_info_from_smp_discover_response( + struct scic_sds_remote_device *sci_dev, + struct smp_response_discover *discover_response) +{ + /* decode discover_response to set sas_address to sci_dev. */ + sci_dev->device_address.high = + discover_response->attached_sas_address.high; + + sci_dev->device_address.low = + discover_response->attached_sas_address.low; + + sci_dev->target_protocols.u.all = discover_response->protocols.u.all; +} + +/** + * scic_remote_device_ea_construct() - This method will construct an + * SCIC_REMOTE_DEVICE object for an expander attached (ea) device from an + * SMP Discover Response. + * @remote_device: This parameter specifies the remote device to be destructed. + * @discover_response: This parameter specifies the SMP Discovery Response to + * be used in device creation. + * + * The user must have previously called scic_remote_device_construct() Remote + * device objects are a limited resource. As such, they must be protected. + * Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. Indicate if the remote device was successfully constructed. + * SCI_SUCCESS Returned if the device was successfully constructed. + * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been + * constructed. If it's an additional phy for the target, then call + * scic_ea_remote_device_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned + * if the supplied parameters necessitate creation of a remote device for which + * the protocol is not supported by the underlying controller hardware. + * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core + * controller associated with the supplied parameters is unable to support + * additional remote devices. + */ +static enum sci_status scic_remote_device_ea_construct(struct scic_sds_remote_device *sci_dev, + struct smp_response_discover *discover_response) +{ + enum sci_status status; + struct scic_sds_controller *scic; + + scic = scic_sds_port_get_controller(sci_dev->owning_port); + + scic_sds_remote_device_get_info_from_smp_discover_response( + sci_dev, discover_response); + + status = scic_sds_controller_allocate_remote_node_context( + scic, sci_dev, &sci_dev->rnc.remote_node_index); + + if (status == SCI_SUCCESS) { + if (sci_dev->target_protocols.u.bits.attached_ssp_target) { + sci_dev->has_ready_substate_machine = false; + } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { + sci_dev->has_ready_substate_machine = true; + + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent, + scic_sds_smp_remote_device_ready_substate_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { + sci_dev->has_ready_substate_machine = true; + + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent, + scic_sds_stp_remote_device_ready_substate_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } + + /* + * For SAS-2 the physical link rate is actually a logical link + * rate that incorporates multiplexing. The SCU doesn't + * incorporate multiplexing and for the purposes of the + * connection the logical link rate is that same as the + * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay + * one another, so this code works for both situations. */ + sci_dev->connection_rate = min_t(u16, + scic_sds_port_get_max_allowed_speed(sci_dev->owning_port), + discover_response->u2.sas1_1.negotiated_physical_link_rate + ); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; + } + + return status; +} + +/** + * scic_remote_device_start() - This method will start the supplied remote + * device. This method enables normal IO requests to flow through to the + * remote device. + * @remote_device: This parameter specifies the device to be started. + * @timeout: This parameter specifies the number of milliseconds in which the + * start operation should complete. + * + * An indication of whether the device was successfully started. SCI_SUCCESS + * This value is returned if the device was successfully started. + * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start + * the device when there have been no phys added to it. + */ +static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *sci_dev, + u32 timeout) +{ + return sci_dev->state_handlers->start_handler(sci_dev); +} /** * isci_remote_device_construct() - This function calls the scic remote device @@ -307,51 +1870,6 @@ void isci_remote_device_not_ready(struct isci_host *ihost, } /** - * isci_remote_device_stop_complete() - This function is called by the scic - * when the remote device stop has completed. We mark the isci device as not - * ready and remove the isci remote device. - * @isci_host: This parameter specifies the isci host object. - * @isci_device: This parameter specifies the remote device. - * @status: This parameter specifies status of the completion. - * - */ -void isci_remote_device_stop_complete( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - enum sci_status status) -{ - dev_dbg(&isci_host->pdev->dev, - "%s: complete isci_device = %p, status = 0x%x\n", - __func__, - isci_device, - status); - - isci_remote_device_change_state(isci_device, isci_stopped); - - /* after stop, we can tear down resources. */ - isci_remote_device_deconstruct(isci_host, isci_device); - -} - -/** - * isci_remote_device_start_complete() - This function is called by the scic - * when the remote device start has completed - * @isci_host: This parameter specifies the isci host object. - * @isci_device: This parameter specifies the remote device. - * @status: This parameter specifies status of the completion. - * - */ -void isci_remote_device_start_complete( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - enum sci_status status) -{ - - -} - - -/** * isci_remote_device_stop() - This function is called internally to stop the * remote device. * @isci_host: This parameter specifies the isci host object. @@ -572,21 +2090,3 @@ void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote } spin_unlock_irqrestore(&ihost->scic_lock, flags); } - -/** - * isci_remote_device_change_state() - This function gets the status of the - * remote_device object. - * @isci_device: This parameter points to the isci_remote_device object - * - * status of the object as a isci_status enum. - */ -void isci_remote_device_change_state( - struct isci_remote_device *isci_device, - enum isci_status status) -{ - unsigned long flags; - - spin_lock_irqsave(&isci_device->state_lock, flags); - isci_device->status = status; - spin_unlock_irqrestore(&isci_device->state_lock, flags); -} diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index aeda395..9d8fcbf 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -53,11 +53,127 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#if !defined(_ISCI_REMOTE_DEVICE_H_) +#ifndef _ISCI_REMOTE_DEVICE_H_ #define _ISCI_REMOTE_DEVICE_H_ -#include "scic_sds_remote_device.h" +#include +#include "sci_status.h" +#include "intel_sas.h" +#include "scu_remote_node_context.h" +#include "remote_node_context.h" +#include "port.h" -struct isci_host; +enum scic_remote_device_not_ready_reason_code { + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, + + SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX + +}; + +struct scic_sds_remote_device { + /** + * The field specifies that the parent object for the base remote + * device is the base object itself. + */ + struct sci_base_object parent; + + /** + * This field contains the information for the base remote device state + * machine. + */ + struct sci_base_state_machine state_machine; + + /** + * This field is the programmed device port width. This value is + * written to the RCN data structure to tell the SCU how many open + * connections this device can have. + */ + u32 device_port_width; + + /** + * This field is the programmed connection rate for this remote device. It is + * used to program the TC with the maximum allowed connection rate. + */ + enum sas_linkrate connection_rate; + + /** + * This field contains the allowed target protocols for this remote device. + */ + struct smp_discover_response_protocols target_protocols; + + /** + * This field contains the device SAS address. + */ + struct sci_sas_address device_address; + + /** + * This filed is assinged the value of true if the device is directly + * attached to the port. + */ + bool is_direct_attached; + +#if !defined(DISABLE_ATAPI) + /** + * This filed is assinged the value of true if the device is an ATAPI + * device. + */ + bool is_atapi; +#endif + + /** + * This filed contains a pointer back to the port to which this device + * is assigned. + */ + struct scic_sds_port *owning_port; + + /** + * This field contains the SCU silicon remote node context specific + * information. + */ + struct scic_sds_remote_node_context rnc; + + /** + * This field contains the stated request count for the remote device. The + * device can not reach the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED until all + * requests are complete and the rnc_posted value is false. + */ + u32 started_request_count; + + /** + * This field contains a pointer to the working request object. It is only + * used only for SATA requests since the unsolicited frames we get from the + * hardware have no Tag value to look up the io request object. + */ + struct scic_sds_request *working_request; + + /** + * This field contains the reason for the remote device going not_ready. It is + * assigned in the state handlers and used in the state transition. + */ + u32 not_ready_reason; + + /** + * This field is true if this remote device has an initialzied ready substate + * machine. SSP devices do not have a ready substate machine and STP devices + * have a ready substate machine. + */ + bool has_ready_substate_machine; + + /** + * This field contains the state machine for the ready substate machine for + * this struct scic_sds_remote_device object. + */ + struct sci_base_state_machine ready_substate_machine; + + /** + * This field maintains the set of state handlers for the remote device + * object. These are changed each time the remote device enters a new state. + */ + const struct scic_sds_remote_device_state_handler *state_handlers; +}; struct isci_remote_device { enum isci_status status; @@ -75,12 +191,6 @@ struct isci_remote_device { #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 -void isci_remote_device_start_complete(struct isci_host *ihost, - struct isci_remote_device *idev, - enum sci_status); -void isci_remote_device_stop_complete(struct isci_host *ihost, - struct isci_remote_device *idev, - enum sci_status); enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev); void isci_remote_device_nuke_requests(struct isci_host *ihost, @@ -97,5 +207,619 @@ void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev); void isci_remote_device_change_state(struct isci_remote_device *idev, enum isci_status status); +/** + * scic_remote_device_stop() - This method will stop both transmission and + * reception of link activity for the supplied remote device. This method + * disables normal IO requests from flowing through to the remote device. + * @remote_device: This parameter specifies the device to be stopped. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * An indication of whether the device was successfully stopped. SCI_SUCCESS + * This value is returned if the transmission and reception for the device was + * successfully stopped. + */ +enum sci_status scic_remote_device_stop( + struct scic_sds_remote_device *remote_device, + u32 timeout); + +/** + * scic_remote_device_reset() - This method will reset the device making it + * ready for operation. This method must be called anytime the device is + * reset either through a SMP phy control or a port hard reset request. + * @remote_device: This parameter specifies the device to be reset. + * + * This method does not actually cause the device hardware to be reset. This + * method resets the software object so that it will be operational after a + * device hardware reset completes. An indication of whether the device reset + * was accepted. SCI_SUCCESS This value is returned if the device reset is + * started. + */ +enum sci_status scic_remote_device_reset( + struct scic_sds_remote_device *remote_device); + +/** + * scic_remote_device_reset_complete() - This method informs the device object + * that the reset operation is complete and the device can resume operation + * again. + * @remote_device: This parameter specifies the device which is to be informed + * of the reset complete operation. + * + * An indication that the device is resuming operation. SCI_SUCCESS the device + * is resuming operation. + */ +enum sci_status scic_remote_device_reset_complete( + struct scic_sds_remote_device *remote_device); + + + +/** + * scic_remote_device_get_connection_rate() - This method simply returns the + * link rate at which communications to the remote device occur. + * @remote_device: This parameter specifies the device for which to get the + * connection rate. + * + * Return the link rate at which we transfer for the supplied remote device. + */ +enum sas_linkrate scic_remote_device_get_connection_rate( + struct scic_sds_remote_device *remote_device); + +/** + * scic_remote_device_get_protocols() - This method will indicate which + * protocols are supported by this remote device. + * @remote_device: This parameter specifies the device for which to return the + * protocol. + * @protocols: This parameter specifies the output values, from the remote + * device object, which indicate the protocols supported by the supplied + * remote_device. + * + * The type of protocols supported by this device. The values are returned as + * part of a bit mask in order to allow for multi-protocol support. + */ +void scic_remote_device_get_protocols( + struct scic_sds_remote_device *remote_device, + struct smp_discover_response_protocols *protocols); + + +#if !defined(DISABLE_ATAPI) +/** + * scic_remote_device_is_atapi() - + * @this_device: The device whose type is to be decided. + * + * This method first decide whether a device is a stp target, then decode the + * signature fis of a DA STP device to tell whether it is a standard end disk + * or an ATAPI device. bool Indicate a device is ATAPI device or not. + */ +bool scic_remote_device_is_atapi( + struct scic_sds_remote_device *device_handle); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_remote_device_is_atapi(device_handle) false +#endif /* !defined(DISABLE_ATAPI) */ + + + +/** + * enum scic_sds_remote_device_states - This enumeration depicts all the states + * for the common remote device state machine. + * + * + */ +enum scic_sds_remote_device_states { + /** + * Simply the initial state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL, + + /** + * This state indicates that the remote device has successfully been + * stopped. In this state no new IO operations are permitted. + * This state is entered from the INITIAL state. + * This state is entered from the STOPPING state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED, + + /** + * This state indicates the the remote device is in the process of + * becoming ready (i.e. starting). In this state no new IO operations + * are permitted. + * This state is entered from the STOPPED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STARTING, + + /** + * This state indicates the remote device is now ready. Thus, the user + * is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_READY, + + /** + * This state indicates that the remote device is in the process of + * stopping. In this state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, + + /** + * This state indicates that the remote device has failed. + * In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FAILED, + + /** + * This state indicates the device is being reset. + * In this state no new IO operations are permitted. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, + + /** + * Simply the final state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FINAL, +}; + +/** + * enum scic_sds_ssp_remote_device_ready_substates - + * + * This is the enumeration of the ready substates for the + * struct scic_sds_remote_device. + */ +enum scic_sds_ssp_remote_device_ready_substates { + /** + * This is the initial state for the remote device ready substate. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL, + + /** + * This is the ready operational substate for the remote device. + * This is the normal operational state for a remote device. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL, + + /** + * This is the suspended state for the remote device. This is the state + * that the device is placed in when a RNC suspend is received by + * the SCU hardware. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED, + + /** + * This is the final state that the device is placed in before a change + * to the base state machine. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL, + + SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES +}; + +/** + * enum scic_sds_stp_remote_device_ready_substates - + * + * This is the enumeration for the struct scic_sds_remote_device ready substates + * for the STP remote device. + */ +enum scic_sds_stp_remote_device_ready_substates { + /** + * This is the idle substate for the stp remote device. When there are no + * active IO for the device it is is in this state. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, + + /** + * This is the command state for for the STP remote device. This state is + * entered when the device is processing a non-NCQ command. The device object + * will fail any new start IO requests until this command is complete. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD, + + /** + * This is the NCQ state for the STP remote device. This state is entered + * when the device is processing an NCQ reuqest. It will remain in this state + * so long as there is one or more NCQ requests being processed. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ, + + /** + * This is the NCQ error state for the STP remote device. This state is + * entered when an SDB error FIS is received by the device object while in the + * NCQ state. The device object will only accept a READ LOG command while in + * this state. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR, + +#if !defined(DISABLE_ATAPI) + /** + * This is the ATAPI error state for the STP ATAPI remote device. This state is + * entered when ATAPI device sends error status FIS without data while the device + * object is in CMD state. A suspension event is expected in this state. The device + * object will resume right away. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR, +#endif + + /** + * This is the READY substate indicates the device is waiting for the RESET task + * coming to be recovered from certain hardware specific error. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET, +}; + +/** + * enum scic_sds_smp_remote_device_ready_substates - + * + * This is the enumeration of the ready substates for the SMP REMOTE DEVICE. + */ +enum scic_sds_smp_remote_device_ready_substates { + /** + * This is the ready operational substate for the remote device. This is the + * normal operational state for a remote device. + */ + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, + + /** + * This is the suspended state for the remote device. This is the state that + * the device is placed in when a RNC suspend is received by the SCU hardware. + */ + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD, +}; + +static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = container_of(rnc, typeof(*sci_dev), rnc); + + return sci_dev; +} + +typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_handler_t)( + struct scic_sds_remote_device *device, + struct scic_sds_request *request, + void *, + enum sci_io_status); + +typedef enum sci_status (*scic_sds_remote_device_handler_t)( + struct scic_sds_remote_device *sci_dev); + +typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type); + +typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)( + struct scic_sds_remote_device *sci_dev); + +typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)( + struct scic_sds_remote_device *sci_dev, + u32 frame_index); + +typedef enum sci_status (*scic_sds_remote_device_event_handler_t)( + struct scic_sds_remote_device *sci_dev, + u32 event_code); + +typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( + struct scic_sds_remote_device *sci_dev); + +/** + * struct scic_sds_remote_device_state_handler - This structure conains the + * state handlers that are needed to process requests for the SCU remote + * device objects. + * + * + */ +struct scic_sds_remote_device_state_handler { + /** + * The start_handler specifies the method invoked when a user + * attempts to start a remote device. + */ + scic_sds_remote_device_handler_t start_handler; + + /** + * The stop_handler specifies the method invoked when a user attempts to + * stop a remote device. + */ + scic_sds_remote_device_handler_t stop_handler; + + /** + * The fail_handler specifies the method invoked when a remote device + * failure has occurred. A failure may be due to an inability to + * initialize/configure the device. + */ + scic_sds_remote_device_handler_t fail_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a remote device. + */ + scic_sds_remote_device_handler_t destruct_handler; + + /** + * The reset handler specifies the method invloked when requesting to + * reset a remote device. + */ + scic_sds_remote_device_handler_t reset_handler; + + /** + * The reset complete handler specifies the method invloked when + * reporting that a reset has completed to the remote device. + */ + scic_sds_remote_device_handler_t reset_complete_handler; + + /** + * The start_io_handler specifies the method invoked when a user + * attempts to start an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t start_io_handler; + + /** + * The complete_io_handler specifies the method invoked when a user + * attempts to complete an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t complete_io_handler; + + /** + * The continue_io_handler specifies the method invoked when a user + * attempts to continue an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t continue_io_handler; + + /** + * The start_task_handler specifies the method invoked when a user + * attempts to start a task management request for a remote device. + */ + scic_sds_remote_device_request_handler_t start_task_handler; + + /** + * The complete_task_handler specifies the method invoked when a user + * attempts to complete a task management request for a remote device. + */ + scic_sds_remote_device_request_handler_t complete_task_handler; + + + scic_sds_remote_device_suspend_handler_t suspend_handler; + scic_sds_remote_device_resume_handler_t resume_handler; + scic_sds_remote_device_event_handler_t event_handler; + scic_sds_remote_device_frame_handler_t frame_handler; +}; + +extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[]; +extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[]; +extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; + +/** + * scic_sds_remote_device_increment_request_count() - + * + * This macro incrments the request count for this device + */ +#define scic_sds_remote_device_increment_request_count(sci_dev) \ + ((sci_dev)->started_request_count++) + +/** + * scic_sds_remote_device_decrement_request_count() - + * + * This macro decrements the request count for this device. This count will + * never decrment past 0. + */ +#define scic_sds_remote_device_decrement_request_count(sci_dev) \ + ((sci_dev)->started_request_count > 0 ? \ + (sci_dev)->started_request_count-- : 0) + +/** + * scic_sds_remote_device_get_request_count() - + * + * This is a helper macro to return the current device request count. + */ +#define scic_sds_remote_device_get_request_count(sci_dev) \ + ((sci_dev)->started_request_count) + +/** + * scic_sds_remote_device_get_port() - + * + * This macro returns the owning port of this remote device obejct. + */ +#define scic_sds_remote_device_get_port(sci_dev) \ + ((sci_dev)->owning_port) + +/** + * scic_sds_remote_device_get_controller() - + * + * This macro returns the controller object that contains this device object + */ +#define scic_sds_remote_device_get_controller(sci_dev) \ + scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev)) + +/** + * scic_sds_remote_device_set_state_handlers() - + * + * This macro sets the remote device state handlers pointer and is set on entry + * to each device state. + */ +#define scic_sds_remote_device_set_state_handlers(sci_dev, handlers) \ + ((sci_dev)->state_handlers = (handlers)) + +/** + * scic_sds_remote_device_get_port() - + * + * This macro returns the owning port of this device + */ +#define scic_sds_remote_device_get_port(sci_dev) \ + ((sci_dev)->owning_port) + +/** + * scic_sds_remote_device_get_sequence() - + * + * This macro returns the remote device sequence value + */ +#define scic_sds_remote_device_get_sequence(sci_dev) \ + (\ + scic_sds_remote_device_get_controller(sci_dev)-> \ + remote_device_sequence[(sci_dev)->rnc.remote_node_index] \ + ) + +/** + * scic_sds_remote_device_get_controller_peg() - + * + * This macro returns the controllers protocol engine group + */ +#define scic_sds_remote_device_get_controller_peg(sci_dev) \ + (\ + scic_sds_controller_get_protocol_engine_group(\ + scic_sds_port_get_controller(\ + scic_sds_remote_device_get_port(sci_dev) \ + ) \ + ) \ + ) + +/** + * scic_sds_remote_device_get_port_index() - + * + * This macro returns the port index for the devices owning port + */ +#define scic_sds_remote_device_get_port_index(sci_dev) \ + (scic_sds_port_get_index(scic_sds_remote_device_get_port(sci_dev))) + +/** + * scic_sds_remote_device_get_index() - + * + * This macro returns the remote node index for this device object + */ +#define scic_sds_remote_device_get_index(sci_dev) \ + ((sci_dev)->rnc.remote_node_index) + +/** + * scic_sds_remote_device_build_command_context() - + * + * This macro builds a remote device context for the SCU post request operation + */ +#define scic_sds_remote_device_build_command_context(device, command) \ + ((command) \ + | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ + | (scic_sds_remote_device_get_port_index((device)) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ + | (scic_sds_remote_device_get_index((device))) \ + ) + +/** + * scic_sds_remote_device_set_working_request() - + * + * This macro makes the working request assingment for the remote device + * object. To clear the working request use this macro with a NULL request + * object. + */ +#define scic_sds_remote_device_set_working_request(device, request) \ + ((device)->working_request = (request)) + +enum sci_status scic_sds_remote_device_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index); + +enum sci_status scic_sds_remote_device_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code); + +enum sci_status scic_sds_remote_device_start_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request); + +enum sci_status scic_sds_remote_device_complete_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request); + +enum sci_status scic_sds_remote_device_resume( + struct scic_sds_remote_device *sci_dev); + +enum sci_status scic_sds_remote_device_suspend( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type); + +enum sci_status scic_sds_remote_device_start_task( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request); + +void scic_sds_remote_device_post_request( + struct scic_sds_remote_device *sci_dev, + u32 request); + +#if !defined(DISABLE_ATAPI) +bool scic_sds_remote_device_is_atapi( + struct scic_sds_remote_device *sci_dev); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_sds_remote_device_is_atapi(sci_dev) false +#endif /* !defined(DISABLE_ATAPI) */ + +void scic_sds_remote_device_start_request( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req, + enum sci_status status); + +void scic_sds_remote_device_continue_request(void *sci_dev); + +enum sci_status scic_sds_remote_device_default_start_handler( + struct scic_sds_remote_device *sci_dev); + +enum sci_status scic_sds_remote_device_default_fail_handler( + struct scic_sds_remote_device *sci_dev); + +enum sci_status scic_sds_remote_device_default_destruct_handler( + struct scic_sds_remote_device *sci_dev); + +enum sci_status scic_sds_remote_device_default_reset_handler( + struct scic_sds_remote_device *device); + +enum sci_status scic_sds_remote_device_default_reset_complete_handler( + struct scic_sds_remote_device *device); + +enum sci_status scic_sds_remote_device_default_start_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +enum sci_status scic_sds_remote_device_default_complete_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +enum sci_status scic_sds_remote_device_default_continue_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +enum sci_status scic_sds_remote_device_default_suspend_handler( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type); + +enum sci_status scic_sds_remote_device_default_resume_handler( + struct scic_sds_remote_device *sci_dev); + + +enum sci_status scic_sds_remote_device_default_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index); + +enum sci_status scic_sds_remote_device_ready_state_stop_handler( + struct scic_sds_remote_device *device); + +enum sci_status scic_sds_remote_device_ready_state_reset_handler( + struct scic_sds_remote_device *device); + +enum sci_status scic_sds_remote_device_general_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index); + +enum sci_status scic_sds_remote_device_general_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code); + +enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler( + struct scic_sds_remote_device *sci_dev); + + #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c new file mode 100644 index 0000000..bdf0b51 --- /dev/null +++ b/drivers/scsi/isci/remote_node_context.c @@ -0,0 +1,1226 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "sci_base_state_machine.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "remote_device.h" +#include "remote_node_context.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_event_codes.h" +#include "scu_task_context.h" + + +/** + * + * @sci_rnc: The RNC for which the is posted request is being made. + * + * This method will return true if the RNC is not in the initial state. In all + * other states the RNC is considered active and this will return true. The + * destroy request of the state machine drives the RNC back to the initial + * state. If the state machine changes then this routine will also have to be + * changed. bool true if the state machine is not in the initial state false if + * the state machine is in the initial state + */ + +/** + * + * @sci_rnc: The state of the remote node context object to check. + * + * This method will return true if the remote node context is in a READY state + * otherwise it will return false bool true if the remote node context is in + * the ready state. false if the remote node context is not in the ready state. + */ +bool scic_sds_remote_node_context_is_ready( + struct scic_sds_remote_node_context *sci_rnc) +{ + u32 current_state = sci_base_state_machine_get_state(&sci_rnc->state_machine); + + if (current_state == SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { + return true; + } + + return false; +} + +/** + * + * @sci_dev: The remote device to use to construct the RNC buffer. + * @rnc: The buffer into which the remote device data will be copied. + * + * This method will construct the RNC buffer for this remote device object. none + */ +static void scic_sds_remote_node_context_construct_buffer( + struct scic_sds_remote_node_context *sci_rnc) +{ + union scu_remote_node_context *rnc; + struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + struct scic_sds_controller *scic; + + scic = scic_sds_remote_device_get_controller(sci_dev); + + rnc = scic_sds_controller_get_remote_node_context_buffer( + scic, sci_rnc->remote_node_index); + + memset(rnc, 0, sizeof(union scu_remote_node_context) + * scic_sds_remote_device_node_count(sci_dev)); + + rnc->ssp.remote_node_index = sci_rnc->remote_node_index; + rnc->ssp.remote_node_port_width = sci_dev->device_port_width; + rnc->ssp.logical_port_index = + scic_sds_remote_device_get_port_index(sci_dev); + + rnc->ssp.remote_sas_address_hi = SCIC_SWAP_DWORD(sci_dev->device_address.high); + rnc->ssp.remote_sas_address_lo = SCIC_SWAP_DWORD(sci_dev->device_address.low); + + rnc->ssp.nexus_loss_timer_enable = true; + rnc->ssp.check_bit = false; + rnc->ssp.is_valid = false; + rnc->ssp.is_remote_node_context = true; + rnc->ssp.function_number = 0; + + rnc->ssp.arbitration_wait_time = 0; + + + if ( + sci_dev->target_protocols.u.bits.attached_sata_device + || sci_dev->target_protocols.u.bits.attached_stp_target + ) { + rnc->ssp.connection_occupancy_timeout = + scic->user_parameters.sds1.stp_max_occupancy_timeout; + rnc->ssp.connection_inactivity_timeout = + scic->user_parameters.sds1.stp_inactivity_timeout; + } else { + rnc->ssp.connection_occupancy_timeout = + scic->user_parameters.sds1.ssp_max_occupancy_timeout; + rnc->ssp.connection_inactivity_timeout = + scic->user_parameters.sds1.ssp_inactivity_timeout; + } + + rnc->ssp.initial_arbitration_wait_time = 0; + + /* Open Address Frame Parameters */ + rnc->ssp.oaf_connection_rate = sci_dev->connection_rate; + rnc->ssp.oaf_features = 0; + rnc->ssp.oaf_source_zone_group = 0; + rnc->ssp.oaf_more_compatibility_features = 0; +} + +/** + * + * @sci_rnc: + * @callback: + * @callback_parameter: + * + * This method will setup the remote node context object so it will transition + * to its ready state. If the remote node context is already setup to + * transition to its final state then this function does nothing. none + */ +static void scic_sds_remote_node_context_setup_to_resume( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { + sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; + } +} + +/** + * + * @sci_rnc: + * @callback: + * @callback_parameter: + * + * This method will setup the remote node context object so it will transistion + * to its final state. none + */ +static void scic_sds_remote_node_context_setup_to_destory( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; +} + +/** + * + * @sci_rnc: + * @callback: + * + * This method will continue to resume a remote node context. This is used in + * the states where a resume is requested while a resume is in progress. + */ +static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_default_destruct_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to stop while " + "in unexpected state %d\n", + __func__, + sci_rnc, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); + + /* + * We have decided that the destruct request on the remote node context can not fail + * since it is either in the initial/destroyed state or is can be destroyed. */ + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_remote_node_context_default_suspend_handler( + struct scic_sds_remote_node_context *sci_rnc, + u32 suspend_type, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to suspend " + "while in wrong state %d\n", + __func__, + sci_rnc, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_remote_node_context_default_resume_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to resume " + "while in wrong state %d\n", + __func__, + sci_rnc, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_remote_node_context_default_start_io_handler( + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) +{ + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to start io " + "0x%p while in wrong state %d\n", + __func__, + sci_rnc, + sci_req, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); + + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; +} + +static enum sci_status scic_sds_remote_node_context_default_start_task_handler( + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) +{ + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to start " + "task 0x%p while in wrong state %d\n", + __func__, + sci_rnc, + sci_req, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); + + return SCI_FAILURE; +} + +static enum sci_status scic_sds_remote_node_context_default_event_handler( + struct scic_sds_remote_node_context *sci_rnc, + u32 event_code) +{ + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to process " + "event 0x%x while in wrong state %d\n", + __func__, + sci_rnc, + event_code, + sci_base_state_machine_get_state(&sci_rnc->state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +/** + * + * @sci_rnc: The rnc for which the task request is targeted. + * @sci_req: The request which is going to be started. + * + * This method determines if the task request can be started by the SCU + * hardware. When the RNC is in the ready state any task can be started. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_success_start_task_handler( + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) +{ + return SCI_SUCCESS; +} + +/** + * + * @sci_rnc: + * @callback: + * @callback_parameter: + * + * This method handles destruct calls from the various state handlers. The + * remote node context can be requested to destroy from any state. If there was + * a user callback it is always replaced with the request to destroy user + * callback. enum sci_status + */ +static enum sci_status scic_sds_remote_node_context_general_destruct_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + scic_sds_remote_node_context_setup_to_destory( + sci_rnc, callback, callback_parameter + ); + + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE + ); + + return SCI_SUCCESS; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + if (sci_rnc->remote_node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + scic_sds_remote_node_context_setup_to_resume( + sci_rnc, callback, callback_parameter + ); + + scic_sds_remote_node_context_construct_buffer(sci_rnc); + + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE + ); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( + struct scic_sds_remote_node_context *sci_rnc, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_POST_RNC_COMPLETE: + status = SCI_SUCCESS; + + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE + ); + break; + + default: + status = SCI_FAILURE; + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to " + "process unexpected event 0x%x while in posting " + "state\n", + __func__, + sci_rnc, + event_code); + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_invalidating_state_destruct_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + scic_sds_remote_node_context_setup_to_destory( + sci_rnc, callback, callback_parameter + ); + + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_remote_node_context_invalidating_state_event_handler( + struct scic_sds_remote_node_context *sci_rnc, + u32 event_code) +{ + enum sci_status status; + + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { + status = SCI_SUCCESS; + + if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE + ); + } else { + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE + ); + } + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* + * We really dont care if the hardware is going to suspend + * the device since it's being invalidated anyway */ + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being " + "invalidated.\n", + __func__, + sci_rnc); + status = SCI_SUCCESS; + break; + + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p " + "requested to process event 0x%x while " + "in state %d.\n", + __func__, + sci_rnc, + event_code, + sci_base_state_machine_get_state( + &sci_rnc->state_machine)); + status = SCI_FAILURE; + break; + } + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + + +static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler( + struct scic_sds_remote_node_context *sci_rnc, + u32 event_code) +{ + enum sci_status status; + + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) { + status = SCI_SUCCESS; + + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE + ); + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* + * We really dont care if the hardware is going to suspend + * the device since it's being resumed anyway */ + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being resumed.\n", + __func__, + sci_rnc); + status = SCI_SUCCESS; + break; + + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested " + "to process event 0x%x while in state %d.\n", + __func__, + sci_rnc, + event_code, + sci_base_state_machine_get_state( + &sci_rnc->state_machine)); + status = SCI_FAILURE; + break; + } + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +/** + * + * @sci_rnc: The remote node context object being suspended. + * @callback: The callback when the suspension is complete. + * @callback_parameter: The parameter that is to be passed into the callback. + * + * This method will handle the suspend requests from the ready state. + * SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_ready_state_suspend_handler( + struct scic_sds_remote_node_context *sci_rnc, + u32 suspend_type, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; + sci_rnc->suspension_code = suspend_type; + + if (suspend_type == SCI_SOFTWARE_SUSPENSION) { + scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); + } + + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE + ); + + return SCI_SUCCESS; +} + +/** + * + * @sci_rnc: The rnc for which the io request is targeted. + * @sci_req: The request which is going to be started. + * + * This method determines if the io request can be started by the SCU hardware. + * When the RNC is in the ready state any io request can be started. enum sci_status + * SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_ready_state_start_io_handler( + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) +{ + return SCI_SUCCESS; +} + + +static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( + struct scic_sds_remote_node_context *sci_rnc, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE + ); + + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + status = SCI_SUCCESS; + break; + + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE + ); + + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + status = SCI_SUCCESS; + break; + + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to " + "process event 0x%x while in state %d.\n", + __func__, + sci_rnc, + event_code, + sci_base_state_machine_get_state( + &sci_rnc->state_machine)); + + status = SCI_FAILURE; + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + enum sci_status status; + struct smp_discover_response_protocols protocols; + + scic_sds_remote_node_context_setup_to_resume( + sci_rnc, callback, callback_parameter + ); + + /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ + + scic_remote_device_get_protocols(rnc_to_dev(sci_rnc), &protocols); + + if ( + (protocols.u.bits.attached_ssp_target == 1) + || (protocols.u.bits.attached_smp_target == 1) + ) { + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE + ); + + status = SCI_SUCCESS; + } else if (protocols.u.bits.attached_stp_target == 1) { + if (rnc_to_dev(sci_rnc)->is_direct_attached) { + /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE + ); + } else { + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE + ); + } + + status = SCI_SUCCESS; + } else { + status = SCI_FAILURE; + } + + return status; +} + +/** + * + * @sci_rnc: The remote node context which is to receive the task request. + * @sci_req: The task request to be transmitted to to the remote target + * device. + * + * This method will report a success or failure attempt to start a new task + * request to the hardware. Since all task requests are sent on the high + * priority queue they can be sent when the RCN is in a TX suspend state. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_suspended_start_task_handler( + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) +{ + scic_sds_remote_node_context_resume(sci_rnc, NULL, NULL); + + return SCI_SUCCESS; +} + +/* --------------------------------------------------------------------------- */ + +static enum sci_status scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + scic_sds_remote_node_context_setup_to_resume( + sci_rnc, callback, callback_parameter + ); + + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE + ); + + return SCI_FAILURE_INVALID_STATE; +} + +/* --------------------------------------------------------------------------- */ + +/** + * + * + * + */ +static enum sci_status scic_sds_remote_node_context_await_suspension_state_resume_handler( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + scic_sds_remote_node_context_setup_to_resume( + sci_rnc, callback, callback_parameter + ); + + return SCI_SUCCESS; +} + +/** + * + * @sci_rnc: The remote node context which is to receive the task request. + * @sci_req: The task request to be transmitted to to the remote target + * device. + * + * This method will report a success or failure attempt to start a new task + * request to the hardware. Since all task requests are sent on the high + * priority queue they can be sent when the RCN is in a TX suspend state. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_node_context_await_suspension_state_start_task_handler( + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) +{ + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_remote_node_context_await_suspension_state_event_handler( + struct scic_sds_remote_node_context *sci_rnc, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE + ); + + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + status = SCI_SUCCESS; + break; + + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_base_state_machine_change_state( + &sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE + ); + + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + status = SCI_SUCCESS; + break; + + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p requested to " + "process event 0x%x while in state %d.\n", + __func__, + sci_rnc, + event_code, + sci_base_state_machine_get_state( + &sci_rnc->state_machine)); + + status = SCI_FAILURE; + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static struct scic_sds_remote_node_context_handlers +scic_sds_remote_node_context_state_handler_table[ + SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES] = +{ + /* SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE */ + { + scic_sds_remote_node_context_default_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_initial_state_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_default_start_task_handler, + scic_sds_remote_node_context_default_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_continue_to_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_default_start_task_handler, + scic_sds_remote_node_context_posting_state_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE */ + { + scic_sds_remote_node_context_invalidating_state_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_continue_to_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_default_start_task_handler, + scic_sds_remote_node_context_invalidating_state_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_continue_to_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_success_start_task_handler, + scic_sds_remote_node_context_resuming_state_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_ready_state_suspend_handler, + scic_sds_remote_node_context_default_resume_handler, + scic_sds_remote_node_context_ready_state_start_io_handler, + scic_sds_remote_node_context_success_start_task_handler, + scic_sds_remote_node_context_ready_state_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_tx_suspended_state_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_suspended_start_task_handler, + scic_sds_remote_node_context_default_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_suspended_start_task_handler, + scic_sds_remote_node_context_default_event_handler + }, + /* SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE */ + { + scic_sds_remote_node_context_general_destruct_handler, + scic_sds_remote_node_context_default_suspend_handler, + scic_sds_remote_node_context_await_suspension_state_resume_handler, + scic_sds_remote_node_context_default_start_io_handler, + scic_sds_remote_node_context_await_suspension_state_start_task_handler, + scic_sds_remote_node_context_await_suspension_state_event_handler + } +}; + +/* + * ***************************************************************************** + * * REMOTE NODE CONTEXT PRIVATE METHODS + * ***************************************************************************** */ + +/** + * + * + * This method just calls the user callback function and then resets the + * callback. + */ +static void scic_sds_remote_node_context_notify_user( + struct scic_sds_remote_node_context *rnc) +{ + if (rnc->user_callback != NULL) { + (*rnc->user_callback)(rnc->user_cookie); + + rnc->user_callback = NULL; + rnc->user_cookie = NULL; + } +} + +/** + * + * + * This method will continue the remote node context state machine by + * requesting to resume the remote node context state machine from its current + * state. + */ +static void scic_sds_remote_node_context_continue_state_transitions( + struct scic_sds_remote_node_context *rnc) +{ + if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { + rnc->state_handlers->resume_handler( + rnc, rnc->user_callback, rnc->user_cookie + ); + } +} + +/** + * + * @sci_rnc: The remote node context object that is to be validated. + * + * This method will mark the rnc buffer as being valid and post the request to + * the hardware. none + */ +static void scic_sds_remote_node_context_validate_context_buffer( + struct scic_sds_remote_node_context *sci_rnc) +{ + struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + union scu_remote_node_context *rnc_buffer; + + rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( + scic_sds_remote_device_get_controller(sci_dev), + sci_rnc->remote_node_index + ); + + rnc_buffer->ssp.is_valid = true; + + if (!sci_dev->is_direct_attached && + sci_dev->target_protocols.u.bits.attached_stp_target) { + scic_sds_remote_device_post_request(sci_dev, + SCU_CONTEXT_COMMAND_POST_RNC_96); + } else { + scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_32); + + if (sci_dev->is_direct_attached) { + scic_sds_port_setup_transports(sci_dev->owning_port, + sci_rnc->remote_node_index); + } + } +} + +/** + * + * @sci_rnc: The remote node context object that is to be invalidated. + * + * This method will update the RNC buffer and post the invalidate request. none + */ +static void scic_sds_remote_node_context_invalidate_context_buffer( + struct scic_sds_remote_node_context *sci_rnc) +{ + union scu_remote_node_context *rnc_buffer; + + rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( + scic_sds_remote_device_get_controller(rnc_to_dev(sci_rnc)), + sci_rnc->remote_node_index); + + rnc_buffer->ssp.is_valid = false; + + scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); +} + +/* + * ***************************************************************************** + * * REMOTE NODE CONTEXT STATE ENTER AND EXIT METHODS + * ***************************************************************************** */ + +/** + * + * + * + */ +static void scic_sds_remote_node_context_initial_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE + ); + + /* + * Check to see if we have gotten back to the initial state because someone + * requested to destroy the remote node context object. */ + if ( + rnc->state_machine.previous_state_id + == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE + ) { + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + scic_sds_remote_node_context_notify_user(rnc); + } +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_posting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *sci_rnc; + + sci_rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + sci_rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE + ); + + scic_sds_remote_node_context_validate_context_buffer(sci_rnc); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_invalidating_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE + ); + + scic_sds_remote_node_context_invalidate_context_buffer(rnc); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_resuming_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + struct smp_discover_response_protocols protocols; + struct scic_sds_remote_device *sci_dev; + + rnc = (struct scic_sds_remote_node_context *)object; + sci_dev = rnc_to_dev(rnc); + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE + ); + + /* + * For direct attached SATA devices we need to clear the TLCR + * NCQ to TCi tag mapping on the phy and in cases where we + * resume because of a target reset we also need to update + * the STPTLDARNI register with the RNi of the device + */ + scic_remote_device_get_protocols(sci_dev, &protocols); + + if (protocols.u.bits.attached_stp_target == 1 && + sci_dev->is_direct_attached) { + scic_sds_port_setup_transports(sci_dev->owning_port, + rnc->remote_node_index); + } + + scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_ready_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE + ); + + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + if (rnc->user_callback != NULL) { + scic_sds_remote_node_context_notify_user(rnc); + } +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_tx_suspended_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE + ); + + scic_sds_remote_node_context_continue_state_transitions(rnc); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE + ); + + scic_sds_remote_node_context_continue_state_transitions(rnc); +} + +/** + * + * + * + */ +static void scic_sds_remote_node_context_await_suspension_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_node_context *rnc; + + rnc = (struct scic_sds_remote_node_context *)object; + + SET_STATE_HANDLER( + rnc, + scic_sds_remote_node_context_state_handler_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE + ); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_remote_node_context_state_table[] = { + [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { + .enter_state = scic_sds_remote_node_context_initial_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { + .enter_state = scic_sds_remote_node_context_posting_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { + .enter_state = scic_sds_remote_node_context_invalidating_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { + .enter_state = scic_sds_remote_node_context_resuming_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { + .enter_state = scic_sds_remote_node_context_ready_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { + .enter_state = scic_sds_remote_node_context_tx_suspended_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { + .enter_state = scic_sds_remote_node_context_tx_rx_suspended_state_enter, + }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { + .enter_state = scic_sds_remote_node_context_await_suspension_state_enter, + }, +}; + +void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, + u16 remote_node_index) +{ + memset(rnc, 0, sizeof(struct scic_sds_remote_node_context)); + + rnc->remote_node_index = remote_node_index; + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + sci_base_state_machine_construct( + &rnc->state_machine, + &rnc->parent, + scic_sds_remote_node_context_state_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE + ); + + sci_base_state_machine_start(&rnc->state_machine); +} diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h new file mode 100644 index 0000000..b3f2546 --- /dev/null +++ b/drivers/scsi/isci/remote_node_context.h @@ -0,0 +1,301 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ +#define _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ + +/** + * This file contains the structures, constants, and prototypes associated with + * the remote node context in the silicon. It exists to model and manage + * the remote node context in the silicon. + * + * + */ + +#include "sci_base_state.h" +#include "sci_base_state_machine.h" + +/** + * + * + * This constant represents an invalid remote device id, it is used to program + * the STPDARNI register so the driver knows when it has received a SIGNATURE + * FIS from the SCU. + */ +#define SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX 0x0FFF + +#define SCU_HARDWARE_SUSPENSION (0) +#define SCI_SOFTWARE_SUSPENSION (1) + +struct scic_sds_request; +struct scic_sds_remote_device; +struct scic_sds_remote_node_context; + +typedef void (*scics_sds_remote_node_context_callback)(void *); + +typedef enum sci_status (*scic_sds_remote_node_context_operation)( + struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter + ); + +typedef enum sci_status (*scic_sds_remote_node_context_suspend_operation)( + struct scic_sds_remote_node_context *sci_rnc, + u32 suspension_type, + scics_sds_remote_node_context_callback callback, + void *callback_parameter + ); + +typedef enum sci_status (*scic_sds_remote_node_context_io_request)( + struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req + ); + +typedef enum sci_status (*scic_sds_remote_node_context_event_handler)( + struct scic_sds_remote_node_context *sci_rnc, + u32 event_code + ); + +struct scic_sds_remote_node_context_handlers { + /** + * This handle is invoked to stop the RNC. The callback is invoked when after + * the hardware notification that the RNC has been invalidated. + */ + scic_sds_remote_node_context_operation destruct_handler; + + /** + * This handler is invoked when there is a request to suspend the RNC. The + * callback is invoked after the hardware notification that the remote node is + * suspended. + */ + scic_sds_remote_node_context_suspend_operation suspend_handler; + + /** + * This handler is invoked when there is a request to resume the RNC. The + * callback is invoked when after the RNC has reached the ready state. + */ + scic_sds_remote_node_context_operation resume_handler; + + /** + * This handler is invoked when there is a request to start an io request + * operation. + */ + scic_sds_remote_node_context_io_request start_io_handler; + + /** + * This handler is invoked when there is a request to start a task request + * operation. + */ + scic_sds_remote_node_context_io_request start_task_handler; + + /** + * This handler is invoked where there is an RNC event that must be processed. + */ + scic_sds_remote_node_context_event_handler event_handler; + +}; + +/** + * This is the enumeration of the remote node context states. + */ +enum scis_sds_remote_node_context_states { + /** + * This state is the initial state for a remote node context. On a resume + * request the remote node context will transition to the posting state. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE, + + /** + * This is a transition state that posts the RNi to the hardware. Once the RNC + * is posted the remote node context will be made ready. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE, + + /** + * This is a transition state that will post an RNC invalidate to the + * hardware. Once the invalidate is complete the remote node context will + * transition to the posting state. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE, + + /** + * This is a transition state that will post an RNC resume to the hardare. + * Once the event notification of resume complete is received the remote node + * context will transition to the ready state. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE, + + /** + * This is the state that the remote node context must be in to accept io + * request operations. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE, + + /** + * This is the state that the remote node context transitions to when it gets + * a TX suspend notification from the hardware. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE, + + /** + * This is the state that the remote node context transitions to when it gets + * a TX RX suspend notification from the hardware. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE, + + /** + * This state is a wait state for the remote node context that waits for a + * suspend notification from the hardware. This state is entered when either + * there is a request to supend the remote node context or when there is a TC + * completion where the remote node will be suspended by the hardware. + */ + SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE, + + SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES + +}; + +/** + * + * + * This enumeration is used to define the end destination state for the remote + * node context. + */ +enum scic_sds_remote_node_context_destination_state { + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED, + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY, + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL +}; + +/** + * struct scic_sds_remote_node_context - This structure contains the data + * associated with the remote node context object. The remote node context + * (RNC) object models the the remote device information necessary to manage + * the silicon RNC. + */ +struct scic_sds_remote_node_context { + /* + * parent object + */ + struct sci_base_object parent; + + /** + * This field indicates the remote node index (RNI) associated with + * this RNC. + */ + u16 remote_node_index; + + /** + * This field is the recored suspension code or the reason for the remote node + * context suspension. + */ + u32 suspension_code; + + /** + * This field is true if the remote node context is resuming from its current + * state. This can cause an automatic resume on receiving a suspension + * notification. + */ + enum scic_sds_remote_node_context_destination_state destination_state; + + /** + * This field contains the callback function that the user requested to be + * called when the requested state transition is complete. + */ + scics_sds_remote_node_context_callback user_callback; + + /** + * This field contains the parameter that is called when the user requested + * state transition is completed. + */ + void *user_cookie; + + /** + * This field contains the data for the object's state machine. + */ + struct sci_base_state_machine state_machine; + + struct scic_sds_remote_node_context_handlers *state_handlers; +}; + +void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, + u16 remote_node_index); + + +bool scic_sds_remote_node_context_is_ready( + struct scic_sds_remote_node_context *sci_rnc); + +#define scic_sds_remote_node_context_get_remote_node_index(rcn) \ + ((rnc)->remote_node_index) + +#define scic_sds_remote_node_context_event_handler(rnc, event_code) \ + ((rnc)->state_handlers->event_handler(rnc, event_code)) + +#define scic_sds_remote_node_context_resume(rnc, callback, parameter) \ + ((rnc)->state_handlers->resume_handler(rnc, callback, parameter)) + +#define scic_sds_remote_node_context_suspend(rnc, suspend_type, callback, parameter) \ + ((rnc)->state_handlers->suspend_handler(rnc, suspend_type, callback, parameter)) + +#define scic_sds_remote_node_context_destruct(rnc, callback, parameter) \ + ((rnc)->state_handlers->destruct_handler(rnc, callback, parameter)) + +#define scic_sds_remote_node_context_start_io(rnc, request) \ + ((rnc)->state_handlers->start_io_handler(rnc, request)) + +#define scic_sds_remote_node_context_start_task(rnc, task) \ + ((rnc)->state_handlers->start_task_handler(rnc, task)) + +#endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c new file mode 100644 index 0000000..8886146 --- /dev/null +++ b/drivers/scsi/isci/remote_node_table.c @@ -0,0 +1,600 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the implementation of the SCIC_SDS_REMOTE_NODE_TABLE + * public, protected, and private methods. + * + * + */ +#include "sci_util.h" +#include "sci_environment.h" +#include "remote_node_table.h" +#include "remote_node_context.h" + +/** + * + * @remote_node_table: This is the remote node index table from which the + * selection will be made. + * @group_table_index: This is the index to the group table from which to + * search for an available selection. + * + * This routine will find the bit position in absolute bit terms of the next 32 + * + bit position. If there are available bits in the first u32 then it is + * just bit position. u32 This is the absolute bit position for an available + * group. + */ +static u32 scic_sds_remote_node_table_get_group_index( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u32 dword_index; + u32 *group_table; + u32 bit_index; + + group_table = remote_node_table->remote_node_groups[group_table_index]; + + for (dword_index = 0; dword_index < remote_node_table->group_array_size; dword_index++) { + if (group_table[dword_index] != 0) { + for (bit_index = 0; bit_index < 32; bit_index++) { + if ((group_table[dword_index] & (1 << bit_index)) != 0) { + return (dword_index * 32) + bit_index; + } + } + } + } + + return SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX; +} + +/** + * + * @out]: remote_node_table This the remote node table in which to clear the + * selector. + * @set_index: This is the remote node selector in which the change will be + * made. + * @group_index: This is the bit index in the table to be modified. + * + * This method will clear the group index entry in the specified group index + * table. none + */ +static void scic_sds_remote_node_table_clear_group_index( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index, + u32 group_index) +{ + u32 dword_index; + u32 bit_index; + u32 *group_table; + + BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); + BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); + + dword_index = group_index / 32; + bit_index = group_index % 32; + group_table = remote_node_table->remote_node_groups[group_table_index]; + + group_table[dword_index] = group_table[dword_index] & ~(1 << bit_index); +} + +/** + * + * @out]: remote_node_table This the remote node table in which to set the + * selector. + * @group_table_index: This is the remote node selector in which the change + * will be made. + * @group_index: This is the bit position in the table to be modified. + * + * This method will set the group index bit entry in the specified gropu index + * table. none + */ +static void scic_sds_remote_node_table_set_group_index( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index, + u32 group_index) +{ + u32 dword_index; + u32 bit_index; + u32 *group_table; + + BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); + BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); + + dword_index = group_index / 32; + bit_index = group_index % 32; + group_table = remote_node_table->remote_node_groups[group_table_index]; + + group_table[dword_index] = group_table[dword_index] | (1 << bit_index); +} + +/** + * + * @out]: remote_node_table This is the remote node table in which to modify + * the remote node availability. + * @remote_node_index: This is the remote node index that is being returned to + * the table. + * + * This method will set the remote to available in the remote node allocation + * table. none + */ +static void scic_sds_remote_node_table_set_node_index( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 slot_normalized; + u32 slot_position; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; + dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; + slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); + slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; + + remote_node_table->available_remote_nodes[dword_location] |= + 1 << (slot_normalized + slot_position); +} + +/** + * + * @out]: remote_node_table This is the remote node table from which to clear + * the available remote node bit. + * @remote_node_index: This is the remote node index which is to be cleared + * from the table. + * + * This method clears the remote node index from the table of available remote + * nodes. none + */ +static void scic_sds_remote_node_table_clear_node_index( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 slot_position; + u32 slot_normalized; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; + dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; + slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); + slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; + + remote_node_table->available_remote_nodes[dword_location] &= + ~(1 << (slot_normalized + slot_position)); +} + +/** + * + * @out]: remote_node_table The remote node table from which the slot will be + * cleared. + * @group_index: The index for the slot that is to be cleared. + * + * This method clears the entire table slot at the specified slot index. none + */ +static void scic_sds_remote_node_table_clear_group( + struct scic_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (group_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value &= ~(SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + remote_node_table->available_remote_nodes[dword_location] = dword_value; +} + +/** + * + * @remote_node_table: + * + * THis method sets an entire remote node group in the remote node table. + */ +static void scic_sds_remote_node_table_set_group( + struct scic_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (group_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value |= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + remote_node_table->available_remote_nodes[dword_location] = dword_value; +} + +/** + * + * @remote_node_table: This is the remote node table that for which the group + * value is to be returned. + * @group_index: This is the group index to use to find the group value. + * + * This method will return the group value for the specified group index. The + * bit values at the specified remote node group index. + */ +static u8 scic_sds_remote_node_table_get_group_value( + struct scic_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value &= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + dword_value = dword_value >> (dword_remainder * 4); + + return (u8)dword_value; +} + +/** + * + * @out]: remote_node_table The remote that which is to be initialized. + * @remote_node_entries: The number of entries to put in the table. + * + * This method will initialize the remote node table for use. none + */ +void scic_sds_remote_node_table_initialize( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_entries) +{ + u32 index; + + /* + * Initialize the raw data we could improve the speed by only initializing + * those entries that we are actually going to be used */ + memset( + remote_node_table->available_remote_nodes, + 0x00, + sizeof(remote_node_table->available_remote_nodes) + ); + + memset( + remote_node_table->remote_node_groups, + 0x00, + sizeof(remote_node_table->remote_node_groups) + ); + + /* Initialize the available remote node sets */ + remote_node_table->available_nodes_array_size = (u16) + (remote_node_entries / SCIC_SDS_REMOTE_NODES_PER_DWORD) + + ((remote_node_entries % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0); + + + /* Initialize each full DWORD to a FULL SET of remote nodes */ + for (index = 0; index < remote_node_entries; index++) { + scic_sds_remote_node_table_set_node_index(remote_node_table, index); + } + + remote_node_table->group_array_size = (u16) + (remote_node_entries / (SCU_STP_REMOTE_NODE_COUNT * 32)) + + ((remote_node_entries % (SCU_STP_REMOTE_NODE_COUNT * 32)) != 0); + + for (index = 0; index < (remote_node_entries / SCU_STP_REMOTE_NODE_COUNT); index++) { + /* + * These are all guaranteed to be full slot values so fill them in the + * available sets of 3 remote nodes */ + scic_sds_remote_node_table_set_group_index(remote_node_table, 2, index); + } + + /* Now fill in any remainders that we may find */ + if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 2) { + scic_sds_remote_node_table_set_group_index(remote_node_table, 1, index); + } else if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 1) { + scic_sds_remote_node_table_set_group_index(remote_node_table, 0, index); + } +} + +/** + * + * @out]: remote_node_table The remote node table from which to allocate a + * remote node. + * @table_index: The group index that is to be used for the search. + * + * This method will allocate a single RNi from the remote node table. The + * table index will determine from which remote node group table to search. + * This search may fail and another group node table can be specified. The + * function is designed to allow a serach of the available single remote node + * group up to the triple remote node group. If an entry is found in the + * specified table the remote node is removed and the remote node groups are + * updated. The RNi value or an invalid remote node context if an RNi can not + * be found. + */ +static u16 scic_sds_remote_node_table_allocate_single_remote_node( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u8 index; + u8 group_value; + u32 group_index; + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + group_index = scic_sds_remote_node_table_get_group_index( + remote_node_table, group_table_index); + + /* We could not find an available slot in the table selector 0 */ + if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { + group_value = scic_sds_remote_node_table_get_group_value( + remote_node_table, group_index); + + for (index = 0; index < SCU_STP_REMOTE_NODE_COUNT; index++) { + if (((1 << index) & group_value) != 0) { + /* We have selected a bit now clear it */ + remote_node_index = (u16)(group_index * SCU_STP_REMOTE_NODE_COUNT + + index); + + scic_sds_remote_node_table_clear_group_index( + remote_node_table, group_table_index, group_index + ); + + scic_sds_remote_node_table_clear_node_index( + remote_node_table, remote_node_index + ); + + if (group_table_index > 0) { + scic_sds_remote_node_table_set_group_index( + remote_node_table, group_table_index - 1, group_index + ); + } + + break; + } + } + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: This is the remote node table from which to allocate the + * remote node entries. + * @group_table_index: THis is the group table index which must equal two (2) + * for this operation. + * + * This method will allocate three consecutive remote node context entries. If + * there are no remaining triple entries the function will return a failure. + * The remote node index that represents three consecutive remote node entries + * or an invalid remote node context if none can be found. + */ +static u16 scic_sds_remote_node_table_allocate_triple_remote_node( + struct scic_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u32 group_index; + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + group_index = scic_sds_remote_node_table_get_group_index( + remote_node_table, group_table_index); + + if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { + remote_node_index = (u16)group_index * SCU_STP_REMOTE_NODE_COUNT; + + scic_sds_remote_node_table_clear_group_index( + remote_node_table, group_table_index, group_index + ); + + scic_sds_remote_node_table_clear_group( + remote_node_table, group_index + ); + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: This is the remote node table from which the remote node + * allocation is to take place. + * @remote_node_count: This is ther remote node count which is one of + * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). + * + * This method will allocate a remote node that mataches the remote node count + * specified by the caller. Valid values for remote node count is + * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). u16 This is + * the remote node index that is returned or an invalid remote node context. + */ +u16 scic_sds_remote_node_table_allocate_remote_node( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_count) +{ + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { + remote_node_index = + scic_sds_remote_node_table_allocate_single_remote_node( + remote_node_table, 0); + + if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + remote_node_index = + scic_sds_remote_node_table_allocate_single_remote_node( + remote_node_table, 1); + } + + if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + remote_node_index = + scic_sds_remote_node_table_allocate_single_remote_node( + remote_node_table, 2); + } + } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { + remote_node_index = + scic_sds_remote_node_table_allocate_triple_remote_node( + remote_node_table, 2); + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: + * + * This method will free a single remote node index back to the remote node + * table. This routine will update the remote node groups + */ +static void scic_sds_remote_node_table_release_single_remote_node( + struct scic_remote_node_table *remote_node_table, + u16 remote_node_index) +{ + u32 group_index; + u8 group_value; + + group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; + + group_value = scic_sds_remote_node_table_get_group_value(remote_node_table, group_index); + + /* + * Assert that we are not trying to add an entry to a slot that is already + * full. */ + BUG_ON(group_value == SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE); + + if (group_value == 0x00) { + /* + * There are no entries in this slot so it must be added to the single + * slot table. */ + scic_sds_remote_node_table_set_group_index(remote_node_table, 0, group_index); + } else if ((group_value & (group_value - 1)) == 0) { + /* + * There is only one entry in this slot so it must be moved from the + * single slot table to the dual slot table */ + scic_sds_remote_node_table_clear_group_index(remote_node_table, 0, group_index); + scic_sds_remote_node_table_set_group_index(remote_node_table, 1, group_index); + } else { + /* + * There are two entries in the slot so it must be moved from the dual + * slot table to the tripple slot table. */ + scic_sds_remote_node_table_clear_group_index(remote_node_table, 1, group_index); + scic_sds_remote_node_table_set_group_index(remote_node_table, 2, group_index); + } + + scic_sds_remote_node_table_set_node_index(remote_node_table, remote_node_index); +} + +/** + * + * @remote_node_table: This is the remote node table to which the remote node + * index is to be freed. + * + * This method will release a group of three consecutive remote nodes back to + * the free remote nodes. + */ +static void scic_sds_remote_node_table_release_triple_remote_node( + struct scic_remote_node_table *remote_node_table, + u16 remote_node_index) +{ + u32 group_index; + + group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; + + scic_sds_remote_node_table_set_group_index( + remote_node_table, 2, group_index + ); + + scic_sds_remote_node_table_set_group(remote_node_table, group_index); +} + +/** + * + * @remote_node_table: The remote node table to which the remote node index is + * to be freed. + * @remote_node_count: This is the count of consecutive remote nodes that are + * to be freed. + * + * This method will release the remote node index back into the remote node + * table free pool. + */ +void scic_sds_remote_node_table_release_remote_node_index( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_count, + u16 remote_node_index) +{ + if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { + scic_sds_remote_node_table_release_single_remote_node( + remote_node_table, remote_node_index); + } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { + scic_sds_remote_node_table_release_triple_remote_node( + remote_node_table, remote_node_index); + } +} + diff --git a/drivers/scsi/isci/remote_node_table.h b/drivers/scsi/isci/remote_node_table.h new file mode 100644 index 0000000..9c02a6c --- /dev/null +++ b/drivers/scsi/isci/remote_node_table.h @@ -0,0 +1,195 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_NODE_TABLE_H_ +#define _SCIC_SDS_REMOTE_NODE_TABLE_H_ + +/** + * This file contains the structures, constants and prototypes used for the + * remote node table. + * + * + */ + +#include "sci_controller_constants.h" + +/** + * + * + * Remote node sets are sets of remote node index in the remtoe node table The + * SCU hardware requires that STP remote node entries take three consecutive + * remote node index so the table is arranged in sets of three. The bits are + * used as 0111 0111 to make a byte and the bits define the set of three remote + * nodes to use as a sequence. + */ +#define SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE 2 + +/** + * + * + * Since the remote node table is organized as DWORDS take the remote node sets + * in bytes and represent them in DWORDs. The lowest ordered bits are the ones + * used in case full DWORD is not being used. i.e. 0000 0000 0000 0000 0111 + * 0111 0111 0111 // if only a single WORD is in use in the DWORD. + */ +#define SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD \ + (sizeof(u32) * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) +/** + * + * + * This is a count of the numeber of remote nodes that can be represented in a + * byte + */ +#define SCIC_SDS_REMOTE_NODES_PER_BYTE \ + (SCU_STP_REMOTE_NODE_COUNT * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) + +/** + * + * + * This is a count of the number of remote nodes that can be represented in a + * DWROD + */ +#define SCIC_SDS_REMOTE_NODES_PER_DWORD \ + (sizeof(u32) * SCIC_SDS_REMOTE_NODES_PER_BYTE) + +/** + * + * + * This is the number of bits in a remote node group + */ +#define SCIC_SDS_REMOTE_NODES_BITS_PER_GROUP 4 + +#define SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX (0xFFFFFFFF) +#define SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE (0x07) +#define SCIC_SDS_REMOTE_NODE_TABLE_EMPTY_SLOT_VALUE (0x00) + +/** + * + * + * Expander attached sata remote node count + */ +#define SCU_STP_REMOTE_NODE_COUNT 3 + +/** + * + * + * Expander or direct attached ssp remote node count + */ +#define SCU_SSP_REMOTE_NODE_COUNT 1 + +/** + * + * + * Direct attached STP remote node count + */ +#define SCU_SATA_REMOTE_NODE_COUNT 1 + +/** + * struct scic_remote_node_table - + * + * + */ +struct scic_remote_node_table { + /** + * This field contains the array size in dwords + */ + u16 available_nodes_array_size; + + /** + * This field contains the array size of the + */ + u16 group_array_size; + + /** + * This field is the array of available remote node entries in bits. + * Because of the way STP remote node data is allocated on the SCU hardware + * the remote nodes must occupy three consecutive remote node context + * entries. For ease of allocation and de-allocation we have broken the + * sets of three into a single nibble. When the STP RNi is allocated all + * of the bits in the nibble are cleared. This math results in a table size + * of MAX_REMOTE_NODES / CONSECUTIVE RNi ENTRIES for STP / 2 entries per byte. + */ + u32 available_remote_nodes[ + (SCI_MAX_REMOTE_DEVICES / SCIC_SDS_REMOTE_NODES_PER_DWORD) + + ((SCI_MAX_REMOTE_DEVICES % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0)]; + + /** + * This field is the nibble selector for the above table. There are three + * possible selectors each for fast lookup when trying to find one, two or + * three remote node entries. + */ + u32 remote_node_groups[ + SCU_STP_REMOTE_NODE_COUNT][ + (SCI_MAX_REMOTE_DEVICES / (32 * SCU_STP_REMOTE_NODE_COUNT)) + + ((SCI_MAX_REMOTE_DEVICES % (32 * SCU_STP_REMOTE_NODE_COUNT)) != 0)]; + +}; + +/* --------------------------------------------------------------------------- */ + +void scic_sds_remote_node_table_initialize( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_entries); + +u16 scic_sds_remote_node_table_allocate_remote_node( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_count); + +void scic_sds_remote_node_table_release_remote_node_index( + struct scic_remote_node_table *remote_node_table, + u32 remote_node_count, + u16 remote_node_index); + +#endif /* _SCIC_SDS_REMOTE_NODE_TABLE_H_ */ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 8d2125b..ff5c05a 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -54,7 +54,6 @@ */ #include "isci.h" -#include "scic_remote_device.h" #include "scic_io_request.h" #include "scic_task_request.h" #include "scic_port.h" diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index c941d909..53ce0c2 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -54,8 +54,7 @@ */ #include "isci.h" -#include "scic_remote_device.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_io_request.h" #include "scic_task_request.h" #include "task.h" diff --git a/drivers/scsi/isci/scu_remote_node_context.h b/drivers/scsi/isci/scu_remote_node_context.h new file mode 100644 index 0000000..33745ad --- /dev/null +++ b/drivers/scsi/isci/scu_remote_node_context.h @@ -0,0 +1,229 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_REMOTE_NODE_CONTEXT_HEADER__ +#define __SCU_REMOTE_NODE_CONTEXT_HEADER__ + +/** + * This file contains the structures and constatns used by the SCU hardware to + * describe a remote node context. + * + * + */ + +/** + * struct ssp_remote_node_context - This structure contains the SCU hardware + * definition for an SSP remote node. + * + * + */ +struct ssp_remote_node_context { + /* WORD 0 */ + + /** + * This field is the remote node index assigned for this remote node. All + * remote nodes must have a unique remote node index. The value of the remote + * node index can not exceed the maximum number of remote nodes reported in + * the SCU device context capacity register. + */ + u32 remote_node_index:12; + u32 reserved0_1:4; + + /** + * This field tells the SCU hardware how many simultaneous connections that + * this remote node will support. + */ + u32 remote_node_port_width:4; + + /** + * This field tells the SCU hardware which logical port to associate with this + * remote node. + */ + u32 logical_port_index:3; + u32 reserved0_2:5; + + /** + * This field will enable the I_T nexus loss timer for this remote node. + */ + u32 nexus_loss_timer_enable:1; + + /** + * This field is the for driver debug only and is not used. + */ + u32 check_bit:1; + + /** + * This field must be set to true when the hardware DMAs the remote node + * context to the hardware SRAM. When the remote node is being invalidated + * this field must be set to false. + */ + u32 is_valid:1; + + /** + * This field must be set to true. + */ + u32 is_remote_node_context:1; + + /* WORD 1 - 2 */ + + /** + * This is the low word of the remote device SAS Address + */ + u32 remote_sas_address_lo; + + /** + * This field is the high word of the remote device SAS Address + */ + u32 remote_sas_address_hi; + + /* WORD 3 */ + /** + * This field reprensets the function number assigned to this remote device. + * This value must match the virtual function number that is being used to + * communicate to the device. + */ + u32 function_number:8; + u32 reserved3_1:8; + + /** + * This field provides the driver a way to cheat on the arbitration wait time + * for this remote node. + */ + u32 arbitration_wait_time:16; + + /* WORD 4 */ + /** + * This field tells the SCU hardware how long this device may occupy the + * connection before it must be closed. + */ + u32 connection_occupancy_timeout:16; + + /** + * This field tells the SCU hardware how long to maintain a connection when + * there are no frames being transmitted on the link. + */ + u32 connection_inactivity_timeout:16; + + /* WORD 5 */ + /** + * This field allows the driver to cheat on the arbitration wait time for this + * remote node. + */ + u32 initial_arbitration_wait_time:16; + + /** + * This field is tells the hardware what to program for the connection rate in + * the open address frame. See the SAS spec for valid values. + */ + u32 oaf_connection_rate:4; + + /** + * This field tells the SCU hardware what to program for the features in the + * open address frame. See the SAS spec for valid values. + */ + u32 oaf_features:4; + + /** + * This field tells the SCU hardware what to use for the source zone group in + * the open address frame. See the SAS spec for more details on zoning. + */ + u32 oaf_source_zone_group:8; + + /* WORD 6 */ + /** + * This field tells the SCU hardware what to use as the more capibilities in + * the open address frame. See the SAS Spec for details. + */ + u32 oaf_more_compatibility_features; + + /* WORD 7 */ + u32 reserved7; + +}; + +/** + * struct stp_remote_node_context - This structure contains the SCU hardware + * definition for a STP remote node. + * + * STP Targets are not yet supported so this definition is a placeholder until + * we do support them. + */ +struct stp_remote_node_context { + /** + * Placeholder data for the STP remote node. + */ + u32 data[8]; + +}; + +/** + * This union combines the SAS and SATA remote node definitions. + * + * union scu_remote_node_context + */ +union scu_remote_node_context { + /** + * SSP Remote Node + */ + struct ssp_remote_node_context ssp; + + /** + * STP Remote Node + */ + struct stp_remote_node_context stp; + +}; + +#endif /* __SCU_REMOTE_NODE_CONTEXT_HEADER__ */ diff --git a/drivers/scsi/isci/smp_remote_device.c b/drivers/scsi/isci/smp_remote_device.c new file mode 100644 index 0000000..718ddaf --- /dev/null +++ b/drivers/scsi/isci/smp_remote_device.c @@ -0,0 +1,314 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "remote_device.h" +#include "scic_sds_request.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_event_codes.h" +#include "scu_task_context.h" + +/* + * ***************************************************************************** + * * SMP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @[in]: device The device the io is sent to. + * @[in]: request The io to start. + * + * This method will handle the start io operation for a SMP device that is in + * the idle state. enum sci_status + */ +static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + enum sci_status status; + + /* Will the port allow the io request to start? */ + status = device->owning_port->state_handlers->start_io_handler( + device->owning_port, device, request); + + if (status == SCI_SUCCESS) { + status = scic_sds_remote_node_context_start_io(&device->rnc, request); + + if (status == SCI_SUCCESS) + status = scic_sds_request_start(request); + + if (status == SCI_SUCCESS) { + device->working_request = request; + + sci_base_state_machine_change_state( + &device->ready_substate_machine, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD + ); + } + + scic_sds_remote_device_start_request(device, request, status); + } + + return status; +} + + +/* + * ****************************************************************************** + * * SMP REMOTE DEVICE READY SUBSTATE CMD HANDLERS + * ****************************************************************************** */ +/** + * + * @device: This is the device object that is receiving the IO. + * @request: The io to start. + * + * This device is already handling a command it can not accept new commands + * until this one is complete. enum sci_status + */ +static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + return SCI_FAILURE_INVALID_STATE; +} + + +/** + * this is the complete_io_handler for smp device at ready cmd substate. + * @device: This is the device object that is receiving the IO. + * @request: The io to start. + * + * enum sci_status + */ +static enum sci_status +scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + enum sci_status status; + struct scic_sds_request *sci_req; + + sci_req = (struct scic_sds_request *)request; + + status = scic_sds_io_request_complete(sci_req); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + device->owning_port, device, sci_req); + + if (status == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(device); + sci_base_state_machine_change_state( + &device->ready_substate_machine, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE + ); + } else + dev_err(scirdev_to_dev(device), + "%s: SCIC SDS Remote Device 0x%p io request " + "0x%p could not be completd on the port 0x%p " + "failed with status %d.\n", + __func__, + device, + sci_req, + device->owning_port, + status); + } + + return status; +} + +/** + * This is frame handler for smp device ready cmd substate. + * @sci_dev: This is the device object that is receiving the frame. + * @frame_index: The index for the frame received. + * + * enum sci_status + */ +static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + enum sci_status status; + + /* + * / The device does not process any UF received from the hardware while + * / in this state. All unsolicited frames are forwarded to the io request + * / object. */ + status = scic_sds_io_request_frame_handler( + sci_dev->working_request, + frame_index + ); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[] = { + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, + .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler + } +}; + +/** + * + * @object: This is the struct sci_base_object which is cast into a + * struct scic_sds_remote_device. + * + * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE enter method. + * This function sets the ready cmd substate handlers and reports the device as + * ready. none + */ +static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, + scic_sds_smp_remote_device_ready_substate_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + + isci_remote_device_ready(ihost, idev); +} + +/** + * + * @object: This is the struct sci_base_object which is cast into a + * struct scic_sds_remote_device. + * + * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD enter method. This + * function sets the remote device objects ready cmd substate handlers, and + * notify core user that the device is not ready. none + */ +static void scic_sds_smp_remote_device_ready_cmd_substate_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + BUG_ON(sci_dev->working_request == NULL); + + SET_STATE_HANDLER(sci_dev, + scic_sds_smp_remote_device_ready_substate_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); +} + +/** + * + * @object: This is the struct sci_base_object which is cast into a + * struct scic_sds_remote_device. + * + * This is the SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_CMD exit method. none + */ +static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + sci_dev->working_request = NULL; +} + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[] = { + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, + }, + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, + .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, + }, +}; diff --git a/drivers/scsi/isci/stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c new file mode 100644 index 0000000..b81f21f --- /dev/null +++ b/drivers/scsi/isci/stp_remote_device.c @@ -0,0 +1,817 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "intel_ata.h" +#include "intel_sata.h" +#include "intel_sat.h" +#include "sci_base_state.h" +#include "scic_sds_controller.h" +#include "scic_sds_port.h" +#include "remote_device.h" +#include "scic_sds_request.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_event_codes.h" + +/** + * This method will perform the STP request completion processing common to IO + * requests and task requests of all types + * @device: This parameter specifies the device for which the request is being + * completed. + * @request: This parameter specifies the request being completed. + * + * This method returns an indication as to whether the request processing + * completed successfully. + */ +static enum sci_status scic_sds_stp_remote_device_complete_request( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + enum sci_status status; + + status = scic_sds_io_request_complete(request); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + device->owning_port, device, request); + + if (status == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(device); + if (request->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* + * This request causes hardware error, device needs to be Lun Reset. + * So here we force the state machine to IDLE state so the rest IOs + * can reach RNC state handler, these IOs will be completed by RNC with + * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ + sci_base_state_machine_change_state( + &device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET + ); + } else if (scic_sds_remote_device_get_request_count(device) == 0) { + sci_base_state_machine_change_state( + &device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE + ); + } + } + } + + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(device), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", + __func__, + device->owning_port, + device, + request, + status); + + return status; +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY COMMON SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * This is the READY NCQ substate handler to start task management request. In + * this routine, we suspend and resume the RNC. + * @device: The target device a task management request towards to. + * @request: The task request. + * + * enum sci_status Always return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to + * let controller_start_task_handler know that the controller can't post TC for + * task request yet, instead, when RNC gets resumed, a controller_continue_task + * callback will be called. + */ +static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + enum sci_status status; + + /* Will the port allow the io request to start? */ + status = device->owning_port->state_handlers->start_io_handler( + device->owning_port, device, request); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_task(&device->rnc, request); + if (status != SCI_SUCCESS) + goto out; + + status = request->state_handlers->start_handler(request); + if (status != SCI_SUCCESS) + goto out; + + /* + * Note: If the remote device state is not IDLE this will replace + * the request that probably resulted in the task management request. + */ + device->working_request = request; + sci_base_state_machine_change_state(&device->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + + /* + * The remote node context must cleanup the TCi to NCQ mapping table. + * The only way to do this correctly is to either write to the TLCR + * register or to invalidate and repost the RNC. In either case the + * remote node context state machine will take the correct action when + * the remote node context is suspended and later resumed. + */ + scic_sds_remote_node_context_suspend(&device->rnc, + SCI_SOFTWARE_SUSPENSION, NULL, NULL); + scic_sds_remote_node_context_resume(&device->rnc, + scic_sds_remote_device_continue_request, + device); + +out: + scic_sds_remote_device_start_request(device, request, status); + /* + * We need to let the controller start request handler know that it can't + * post TC yet. We will provide a callback function to post TC when RNC gets + * resumed. + */ + return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * This method will handle the start io operation for a sata device that is in + * the command idle state. - Evalute the type of IO request to be started - + * If its an NCQ request change to NCQ substate - If its any other command + * change to the CMD substate + * @device: + * @request: + * + * If this is a softreset we may want to have a different substate. + * enum sci_status + */ +static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status status; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(request); + + + /* Will the port allow the io request to start? */ + status = sci_dev->owning_port->state_handlers->start_io_handler( + sci_dev->owning_port, sci_dev, request); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); + if (status != SCI_SUCCESS) + goto out; + + status = request->state_handlers->start_handler(request); + if (status != SCI_SUCCESS) + goto out; + + if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { + sci_base_state_machine_change_state(&sci_dev->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); + } else { + sci_dev->working_request = request; + sci_base_state_machine_change_state(&sci_dev->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + } +out: + scic_sds_remote_device_start_request(sci_dev, request, status); + return status; +} + + +/** + * + * @[in]: device The device received event. + * @[in]: event_code The event code. + * + * This method will handle the event for a sata device that is in the idle + * state. We pick up suspension events to handle specifically to this state. We + * resume the RNC right away. enum sci_status + */ +static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + enum sci_status status; + + status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); + + if (status == SCI_SUCCESS) { + if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX + || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { + status = scic_sds_remote_node_context_resume( + &sci_dev->rnc, NULL, NULL); + } + } + + return status; +} + + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS + * ***************************************************************************** */ + +static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status status; + struct isci_request *isci_request = + (struct isci_request *)sci_object_get_association(request); + + if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { + status = sci_dev->owning_port->state_handlers->start_io_handler( + sci_dev->owning_port, + sci_dev, + request); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); + if (status != SCI_SUCCESS) + return status; + + status = request->state_handlers->start_handler(request); + + scic_sds_remote_device_start_request(sci_dev, request, status); + } else + status = SCI_FAILURE_INVALID_STATE; + + return status; +} + + +/** + * This method will handle events received while the STP device is in the ready + * command substate. + * @sci_dev: This is the device object that is receiving the event. + * @event_code: The event code to process. + * + * enum sci_status + */ + +static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + + status = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), + frame_index, + (void **)&frame_header + ); + + if (status == SCI_SUCCESS) { + if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS && + (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { + sci_dev->not_ready_reason = + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + /* + * / @todo Check sactive and complete associated IO + * if any. + */ + + sci_base_state_machine_change_state( + &sci_dev->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR + ); + } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H && + (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { + + /* + * Some devices return D2H FIS when an NCQ error is detected. + * Treat this like an SDB error FIS ready reason. + */ + sci_dev->not_ready_reason = + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + sci_base_state_machine_change_state( + &sci_dev->ready_substate_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR + ); + } else { + status = SCI_FAILURE; + } + + scic_sds_controller_release_frame( + scic_sds_remote_device_get_controller(sci_dev), frame_index + ); + } + + return status; +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY CMD SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * This device is already handling a command it can not accept new commands + * until this one is complete. + * @device: + * @request: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type) +{ + enum sci_status status; + + status = scic_sds_remote_node_context_suspend(&sci_dev->rnc, + suspend_type, NULL, NULL); + + return status; +} + +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + enum sci_status status; + + /* + * / The device doe not process any UF received from the hardware while + * / in this state. All unsolicited frames are forwarded to the io request + * / object. */ + status = scic_sds_io_request_frame_handler( + sci_dev->working_request, + frame_index + ); + + return status; +} + + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS + * ***************************************************************************** */ + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY NCQ ERROR SUBSTATE HANDLERS + * ***************************************************************************** */ + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE HANDLERS + * ***************************************************************************** */ +static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; +} + + + +/** + * This method will perform the STP request (both io or task) completion + * processing for await reset state. + * @device: This parameter specifies the device for which the request is being + * completed. + * @request: This parameter specifies the request being completed. + * + * This method returns an indication as to whether the request processing + * completed successfully. + */ +static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + struct scic_sds_request *sci_req = (struct scic_sds_request *)request; + enum sci_status status; + + status = scic_sds_io_request_complete(sci_req); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + device->owning_port, device, sci_req + ); + + if (status == SCI_SUCCESS) + scic_sds_remote_device_decrement_request_count(device); + } + + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(device), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", + __func__, + device->owning_port, + device, + sci_req, + status); + + return status; +} + +#if !defined(DISABLE_ATAPI) +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY ATAPI ERROR SUBSTATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @[in]: device The device received event. + * @[in]: event_code The event code. + * + * This method will handle the event for a ATAPI device that is in the ATAPI + * ERROR state. We pick up suspension events to handle specifically to this + * state. We resume the RNC right away. We then complete the outstanding IO to + * this device. enum sci_status + */ +enum sci_status scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + enum sci_status status; + + status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); + + if (status == SCI_SUCCESS) { + if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX + || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { + status = scic_sds_remote_node_context_resume( + sci_dev->rnc, + sci_dev->working_request->state_handlers->parent.complete_handler, + (void *)sci_dev->working_request + ); + } + } + + return status; +} +#endif /* !defined(DISABLE_ATAPI) */ + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = { + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, +#if !defined(DISABLE_ATAPI) + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, +#endif + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + } +}; + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY SUBSTATE PRIVATE METHODS + * ***************************************************************************** */ + +static void +scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *user_cookie) +{ + struct scic_sds_remote_device *sci_dev = user_cookie; + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + + /* + * For NCQ operation we do not issue a + * scic_cb_remote_device_not_ready(). As a result, avoid sending + * the ready notification. + */ + if (sci_dev->ready_substate_machine.previous_state_id != + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) + isci_remote_device_ready(ihost, idev); +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY IDLE SUBSTATE + * ***************************************************************************** */ + +/** + * + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +static void scic_sds_stp_remote_device_ready_idle_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = (struct scic_sds_remote_device *)device; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE + ); + + sci_dev->working_request = NULL; + + if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { + /* + * Since the RNC is ready, it's alright to finish completion + * processing (e.g. signal the remote device is ready). */ + scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( + sci_dev + ); + } else { + scic_sds_remote_node_context_resume( + &sci_dev->rnc, + scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, + sci_dev); + } +} + +static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + BUG_ON(sci_dev->working_request == NULL); + + SET_STATE_HANDLER(sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); +} + +static void scic_sds_stp_remote_device_ready_ncq_substate_enter(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + SET_STATE_HANDLER(sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); +} + +static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + + if (sci_dev->not_ready_reason == + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) + isci_remote_device_not_ready(ihost, idev, sci_dev->not_ready_reason); +} + +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE + * ***************************************************************************** */ + +/** + * The enter routine to READY AWAIT RESET substate. + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +static void scic_sds_stp_remote_device_ready_await_reset_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = (struct scic_sds_remote_device *)device; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET + ); +} + +#if !defined(DISABLE_ATAPI) +/* + * ***************************************************************************** + * * STP REMOTE DEVICE READY ATAPI ERROR SUBSTATE + * ***************************************************************************** */ + +/** + * The enter routine to READY ATAPI ERROR substate. + * @device: This is the SCI base object which is cast into a + * struct scic_sds_remote_device object. + * + */ +void scic_sds_stp_remote_device_ready_atapi_error_substate_enter( + struct sci_base_object *device) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = (struct scic_sds_remote_device *)device; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_stp_remote_device_ready_substate_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR + ); +} +#endif /* !defined(DISABLE_ATAPI) */ + +/* --------------------------------------------------------------------------- */ + +const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[] = { + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { + .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { + .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, + }, +#if !defined(DISABLE_ATAPI) + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { + .enter_state = scic_sds_stp_remote_device_ready_atapi_error_substate_enter, + }, +#endif + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { + .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter, + }, +}; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index f54f523..e011d66 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -56,10 +56,9 @@ #include #include #include "scic_task_request.h" -#include "scic_remote_device.h" #include "scic_io_request.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_remote_node_context.h" +#include "remote_device.h" +#include "remote_node_context.h" #include "isci.h" #include "request.h" #include "sata.h" -- cgit v0.10.2 From b87ee3075b090e1dd0bdf40b295142b606d55e64 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 25 Apr 2011 11:48:29 -0700 Subject: isci: cleanup remote device construction and comments The construction routines scic_remote_device_[de]a_construct both reference the need to call scic_remote_device_construct first. Delete that comment and just have them call it explicitly, also: * move the comments from header to source * delete dead references to scic_[de]a_remote_device_add_phy Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 6b9ea90..7064181 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1438,15 +1438,14 @@ static const struct sci_base_state scic_sds_remote_device_state_table[] = { }; /** - * scic_remote_device_construct() - This method will perform the construction - * common to all remote device objects. + * scic_remote_device_construct() - common construction * @sci_port: SAS/SATA port through which this device is accessed. * @sci_dev: remote device to construct * - * It isn't necessary to call scic_remote_device_destruct() for device objects - * that have only called this method for construction. Once subsequent - * construction methods have been invoked (e.g. - * scic_remote_device_da_construct()), then destruction should occur. none + * This routine just performs benign initialization and does not + * allocate the remote_node_context which is left to + * scic_remote_device_[de]a_construct(). scic_remote_device_destruct() + * frees the remote_node_context(s) for the device. */ static void scic_remote_device_construct(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev) @@ -1473,32 +1472,28 @@ static void scic_remote_device_construct(struct scic_sds_port *sci_port, } /** - * scic_remote_device_da_construct() - This method will construct a - * SCIC_REMOTE_DEVICE object for a direct attached (da) device. The - * information (e.g. IAF, Signature FIS, etc.) necessary to build the device - * is known to the SCI Core since it is contained in the scic_phy object. - * @remote_device: This parameter specifies the remote device to be destructed. - * - * The user must have previously called scic_remote_device_construct() Remote - * device objects are a limited resource. As such, they must be protected. - * Thus calls to construct and destruct are mutually exclusive and - * non-reentrant. Indicate if the remote device was successfully constructed. - * SCI_SUCCESS Returned if the device was successfully constructed. - * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been - * constructed. If it's an additional phy for the target, then call - * scic_remote_device_da_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned - * if the supplied parameters necessitate creation of a remote device for which - * the protocol is not supported by the underlying controller hardware. - * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core - * controller associated with the supplied parameters is unable to support - * additional remote devices. + * scic_remote_device_da_construct() - construct direct attached device. + * + * The information (e.g. IAF, Signature FIS, etc.) necessary to build + * the device is known to the SCI Core since it is contained in the + * scic_phy object. Remote node context(s) is/are a global resource + * allocated by this routine, freed by scic_remote_device_destruct(). + * + * Returns: + * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. + * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to + * sata-only controller instance. + * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ -static enum sci_status scic_remote_device_da_construct(struct scic_sds_remote_device *sci_dev) +static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev) { enum sci_status status; u16 remote_node_index; struct sci_sas_identify_address_frame_protocols protocols; + scic_remote_device_construct(sci_port, sci_dev); + /* * This information is request to determine how many remote node context * entries will be needed to store the remote node. @@ -1567,34 +1562,26 @@ static void scic_sds_remote_device_get_info_from_smp_discover_response( } /** - * scic_remote_device_ea_construct() - This method will construct an - * SCIC_REMOTE_DEVICE object for an expander attached (ea) device from an - * SMP Discover Response. - * @remote_device: This parameter specifies the remote device to be destructed. - * @discover_response: This parameter specifies the SMP Discovery Response to - * be used in device creation. - * - * The user must have previously called scic_remote_device_construct() Remote - * device objects are a limited resource. As such, they must be protected. - * Thus calls to construct and destruct are mutually exclusive and - * non-reentrant. Indicate if the remote device was successfully constructed. - * SCI_SUCCESS Returned if the device was successfully constructed. - * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been - * constructed. If it's an additional phy for the target, then call - * scic_ea_remote_device_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned - * if the supplied parameters necessitate creation of a remote device for which - * the protocol is not supported by the underlying controller hardware. - * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core - * controller associated with the supplied parameters is unable to support - * additional remote devices. + * scic_remote_device_ea_construct() - construct expander attached device + * @discover_response: data to build remote device + * + * Remote node context(s) is/are a global resource allocated by this + * routine, freed by scic_remote_device_destruct(). + * + * Returns: + * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. + * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to + * sata-only controller instance. + * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ -static enum sci_status scic_remote_device_ea_construct(struct scic_sds_remote_device *sci_dev, +static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, struct smp_response_discover *discover_response) { + struct scic_sds_controller *scic = sci_port->owning_controller; enum sci_status status; - struct scic_sds_controller *scic; - scic = scic_sds_port_get_controller(sci_dev->owning_port); + scic_remote_device_construct(sci_port, sci_dev); scic_sds_remote_device_get_info_from_smp_discover_response( sci_dev, discover_response); @@ -1632,9 +1619,8 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_remote_de * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay * one another, so this code works for both situations. */ sci_dev->connection_rate = min_t(u16, - scic_sds_port_get_max_allowed_speed(sci_dev->owning_port), - discover_response->u2.sas1_1.negotiated_physical_link_rate - ); + scic_sds_port_get_max_allowed_speed(sci_port), + discover_response->u2.sas1_1.negotiated_physical_link_rate); /* / @todo Should I assign the port width by reading all of the phys on the port? */ sci_dev->device_port_width = 1; @@ -1678,11 +1664,6 @@ static enum sci_status isci_remote_device_construct( { enum sci_status status = SCI_SUCCESS; - /* let the core do it's common constuction. */ - scic_remote_device_construct(port->sci_port_handle, - &isci_device->sci); - - /* let the core do it's device specific constuction. */ if (isci_device->domain_dev->parent && (isci_device->domain_dev->parent->dev_type == EDGE_DEV)) { int i; @@ -1746,11 +1727,13 @@ static enum sci_status isci_remote_device_construct( "%s: parent->dev_type = EDGE_DEV\n", __func__); - status = scic_remote_device_ea_construct(&isci_device->sci, + status = scic_remote_device_ea_construct(port->sci_port_handle, + &isci_device->sci, (struct smp_response_discover *)&discover_response); } else - status = scic_remote_device_da_construct(&isci_device->sci); + status = scic_remote_device_da_construct(port->sci_port_handle, + &isci_device->sci); if (status != SCI_SUCCESS) { -- cgit v0.10.2 From a1a113b0a1ea437daf099b44f8a39e93a02a3f47 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 21 Apr 2011 18:44:45 -0700 Subject: isci: kill smp_discover_response_protocols in favor of domain_device.dev_type This is step 1 of removing the contortions to: 1/ unparse expander phy data into a smp discover frame 2/ open-code-parse the smp discover fram into a domain_device.dev_type equivalent libsas has already spent cycles determining the dev_type, so now that scic_sds_remote_device is unified with isci_remote_device we can directly reference dev_type. This might also change multi-level expander detection as we previously only looked at dev_type == EDGE_DEV and we did not consider the FANOUT_DEV case. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index e15c4e2..ce81286 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -74,9 +74,9 @@ #include "scic_sds_port.h" #include "scic_sds_phy.h" #include "remote_node_table.h" +#include "remote_device.h" #include "scu_registers.h" #include "scu_constants.h" -#include "scu_remote_node_context.h" #include "scu_task_context.h" #include "scu_unsolicited_frame.h" #include "scic_sds_unsolicited_frame_control.h" @@ -498,14 +498,16 @@ enum scic_sds_controller_states { #define scic_sds_io_sequence_increment(value) \ ((value) = (((value) + 1) & 0x000F)) -#define scic_sds_remote_device_node_count(device) \ - (\ - (\ - (device)->target_protocols.u.bits.attached_stp_target \ - && ((device)->is_direct_attached != true) \ - ) \ - ? SCU_STP_REMOTE_NODE_COUNT : SCU_SSP_REMOTE_NODE_COUNT \ - ) +/* expander attached sata devices require 3 rnc slots */ +static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev) +{ + struct domain_device *dev = sci_dev_to_domain(sci_dev); + + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + !sci_dev->is_direct_attached) + return SCU_STP_REMOTE_NODE_COUNT; + return SCU_SSP_REMOTE_NODE_COUNT; +} /** * scic_sds_controller_set_invalid_phy() - diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index b07e48e..057f95a 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -434,7 +434,7 @@ void scic_sds_port_get_attached_sas_address( * multi-protocol support. * */ -void scic_sds_port_get_attached_protocols( +static void scic_sds_port_get_attached_protocols( struct scic_sds_port *sci_port, struct sci_sas_identify_address_frame_protocols *protocols) { diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 964e388..59c76cd 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -447,8 +447,4 @@ void scic_sds_port_get_attached_sas_address( struct scic_sds_port *sci_port, struct sci_sas_address *sas_address); -void scic_sds_port_get_attached_protocols( - struct scic_sds_port *sci_port, - struct sci_sas_identify_address_frame_protocols *protocols); - #endif /* _SCIC_SDS_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index dfb9412..a66e7b2 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1758,8 +1758,8 @@ enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, struct scic_sds_request *sci_req, struct scic_sds_request **new_scic_io_request_handle) { + struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; - struct smp_discover_response_protocols device_protocol; /* Build the common part of the request */ scic_sds_general_request_construct(scic, sci_dev, io_tag, @@ -1768,19 +1768,16 @@ enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; - scic_remote_device_get_protocols(sci_dev, &device_protocol); - - if (device_protocol.u.bits.attached_ssp_target) { + if (dev->dev_type == SAS_END_DEV) { scic_sds_ssp_io_request_assign_buffers(sci_req); - } else if (device_protocol.u.bits.attached_stp_target) { + } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { scic_sds_stp_request_assign_buffers(sci_req); memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); - } else if (device_protocol.u.bits.attached_smp_target) { + } else if (dev_is_expander(dev)) { scic_sds_smp_request_assign_buffers(sci_req); memset(sci_req->command_buffer, 0, sizeof(struct smp_request)); - } else { + } else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - } if (status == SCI_SUCCESS) { memset(sci_req->task_context_buffer, 0, @@ -1798,17 +1795,15 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_request *sci_req, struct scic_sds_request **new_sci_req) { + struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; - struct smp_discover_response_protocols device_protocol; /* Build the common part of the request */ scic_sds_general_request_construct(scic, sci_dev, io_tag, user_io_request_object, sci_req); - scic_remote_device_get_protocols(sci_dev, &device_protocol); - - if (device_protocol.u.bits.attached_ssp_target) { + if (dev->dev_type == SAS_END_DEV) { scic_sds_ssp_task_request_assign_buffers(sci_req); sci_req->has_started_substate_machine = true; @@ -1820,11 +1815,10 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, scic_sds_io_request_started_task_mgmt_substate_table, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION ); - } else if (device_protocol.u.bits.attached_stp_target) { + } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) scic_sds_stp_request_assign_buffers(sci_req); - } else { + else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - } if (status == SCI_SUCCESS) { sci_req->is_task_management_request = true; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 7064181..fc79a5b 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -100,13 +100,6 @@ enum sas_linkrate scic_remote_device_get_connection_rate( } -void scic_remote_device_get_protocols( - struct scic_sds_remote_device *sci_dev, - struct smp_discover_response_protocols *pr) -{ - pr->u.all = sci_dev->target_protocols.u.all; -} - #if !defined(DISABLE_ATAPI) bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) { @@ -1490,7 +1483,7 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci { enum sci_status status; u16 remote_node_index; - struct sci_sas_identify_address_frame_protocols protocols; + struct domain_device *dev = sci_dev_to_domain(sci_dev); scic_remote_device_construct(sci_port, sci_dev); @@ -1498,53 +1491,46 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci * This information is request to determine how many remote node context * entries will be needed to store the remote node. */ - scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols); - sci_dev->target_protocols.u.all = protocols.u.all; sci_dev->is_direct_attached = true; -#if !defined(DISABLE_ATAPI) - sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev); -#endif + status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller, + sci_dev, + &remote_node_index); - status = scic_sds_controller_allocate_remote_node_context( - sci_dev->owning_port->owning_controller, - sci_dev, - &remote_node_index); + if (status != SCI_SUCCESS) + return status; - if (status == SCI_SUCCESS) { - sci_dev->rnc.remote_node_index = remote_node_index; + sci_dev->rnc.remote_node_index = remote_node_index; - scic_sds_port_get_attached_sas_address( - sci_dev->owning_port, &sci_dev->device_address); + scic_sds_port_get_attached_sas_address(sci_port, &sci_dev->device_address); - if (sci_dev->target_protocols.u.bits.attached_ssp_target) { - sci_dev->has_ready_substate_machine = false; - } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { - sci_dev->has_ready_substate_machine = true; + if (dev->dev_type == SAS_END_DEV) + sci_dev->has_ready_substate_machine = false; + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + sci_dev->has_ready_substate_machine = true; - sci_base_state_machine_construct( + sci_base_state_machine_construct( &sci_dev->ready_substate_machine, &sci_dev->parent, scic_sds_stp_remote_device_ready_substate_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { - sci_dev->has_ready_substate_machine = true; + } else if (dev_is_expander(dev)) { + sci_dev->has_ready_substate_machine = true; - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( &sci_dev->ready_substate_machine, &sci_dev->parent, scic_sds_smp_remote_device_ready_substate_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } + } else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; - sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed( - sci_dev->owning_port); + sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(sci_port); - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; - } + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; - return status; + return SCI_SUCCESS; } static void scic_sds_remote_device_get_info_from_smp_discover_response( @@ -1557,8 +1543,6 @@ static void scic_sds_remote_device_get_info_from_smp_discover_response( sci_dev->device_address.low = discover_response->attached_sas_address.low; - - sci_dev->target_protocols.u.all = discover_response->protocols.u.all; } /** @@ -1579,6 +1563,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci struct smp_response_discover *discover_response) { struct scic_sds_controller *scic = sci_port->owning_controller; + struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status; scic_remote_device_construct(sci_port, sci_dev); @@ -1588,43 +1573,42 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci status = scic_sds_controller_allocate_remote_node_context( scic, sci_dev, &sci_dev->rnc.remote_node_index); + if (status != SCI_SUCCESS) + return status; - if (status == SCI_SUCCESS) { - if (sci_dev->target_protocols.u.bits.attached_ssp_target) { - sci_dev->has_ready_substate_machine = false; - } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { - sci_dev->has_ready_substate_machine = true; + if (dev->dev_type == SAS_END_DEV) + sci_dev->has_ready_substate_machine = false; + else if (dev_is_expander(dev)) { + sci_dev->has_ready_substate_machine = true; - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( &sci_dev->ready_substate_machine, &sci_dev->parent, scic_sds_smp_remote_device_ready_substate_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { - sci_dev->has_ready_substate_machine = true; + } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + sci_dev->has_ready_substate_machine = true; - sci_base_state_machine_construct( + sci_base_state_machine_construct( &sci_dev->ready_substate_machine, &sci_dev->parent, scic_sds_stp_remote_device_ready_substate_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } + } - /* - * For SAS-2 the physical link rate is actually a logical link - * rate that incorporates multiplexing. The SCU doesn't - * incorporate multiplexing and for the purposes of the - * connection the logical link rate is that same as the - * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay - * one another, so this code works for both situations. */ - sci_dev->connection_rate = min_t(u16, - scic_sds_port_get_max_allowed_speed(sci_port), + /* + * For SAS-2 the physical link rate is actually a logical link + * rate that incorporates multiplexing. The SCU doesn't + * incorporate multiplexing and for the purposes of the + * connection the logical link rate is that same as the + * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay + * one another, so this code works for both situations. */ + sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(sci_port), discover_response->u2.sas1_1.negotiated_physical_link_rate); - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; - } + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; return status; } @@ -1665,7 +1649,7 @@ static enum sci_status isci_remote_device_construct( enum sci_status status = SCI_SUCCESS; if (isci_device->domain_dev->parent && - (isci_device->domain_dev->parent->dev_type == EDGE_DEV)) { + dev_is_expander(isci_device->domain_dev->parent)) { int i; /* struct smp_response_discover discover_response; */ diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 9d8fcbf..3982160 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -100,11 +100,6 @@ struct scic_sds_remote_device { enum sas_linkrate connection_rate; /** - * This field contains the allowed target protocols for this remote device. - */ - struct smp_discover_response_protocols target_protocols; - - /** * This field contains the device SAS address. */ struct sci_sas_address device_address; @@ -264,23 +259,6 @@ enum sci_status scic_remote_device_reset_complete( enum sas_linkrate scic_remote_device_get_connection_rate( struct scic_sds_remote_device *remote_device); -/** - * scic_remote_device_get_protocols() - This method will indicate which - * protocols are supported by this remote device. - * @remote_device: This parameter specifies the device for which to return the - * protocol. - * @protocols: This parameter specifies the output values, from the remote - * device object, which indicate the protocols supported by the supplied - * remote_device. - * - * The type of protocols supported by this device. The values are returned as - * part of a bit mask in order to allow for multi-protocol support. - */ -void scic_remote_device_get_protocols( - struct scic_sds_remote_device *remote_device, - struct smp_discover_response_protocols *protocols); - - #if !defined(DISABLE_ATAPI) /** * scic_remote_device_is_atapi() - @@ -477,6 +455,18 @@ static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_n return sci_dev; } +static inline struct domain_device *sci_dev_to_domain(struct scic_sds_remote_device *sci_dev) +{ + struct isci_remote_device *idev = container_of(sci_dev, typeof(*idev), sci); + + return idev->domain_dev; +} + +static inline bool dev_is_expander(struct domain_device *dev) +{ + return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; +} + typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( struct scic_sds_remote_device *device, struct scic_sds_request *request); diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index bdf0b51..285232f 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -106,8 +106,9 @@ bool scic_sds_remote_node_context_is_ready( static void scic_sds_remote_node_context_construct_buffer( struct scic_sds_remote_node_context *sci_rnc) { - union scu_remote_node_context *rnc; struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + struct domain_device *dev = sci_dev_to_domain(sci_dev); + union scu_remote_node_context *rnc; struct scic_sds_controller *scic; scic = scic_sds_remote_device_get_controller(sci_dev); @@ -134,11 +135,7 @@ static void scic_sds_remote_node_context_construct_buffer( rnc->ssp.arbitration_wait_time = 0; - - if ( - sci_dev->target_protocols.u.bits.attached_sata_device - || sci_dev->target_protocols.u.bits.attached_stp_target - ) { + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { rnc->ssp.connection_occupancy_timeout = scic->user_parameters.sds1.stp_max_occupancy_timeout; rnc->ssp.connection_inactivity_timeout = @@ -639,45 +636,30 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha scics_sds_remote_node_context_callback callback, void *callback_parameter) { - enum sci_status status; - struct smp_discover_response_protocols protocols; + struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + struct domain_device *dev = sci_dev_to_domain(sci_dev); + enum sci_status status = SCI_SUCCESS; - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); + scic_sds_remote_node_context_setup_to_resume(sci_rnc, callback, + callback_parameter); /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ - - scic_remote_device_get_protocols(rnc_to_dev(sci_rnc), &protocols); - - if ( - (protocols.u.bits.attached_ssp_target == 1) - || (protocols.u.bits.attached_smp_target == 1) - ) { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); - - status = SCI_SUCCESS; - } else if (protocols.u.bits.attached_stp_target == 1) { - if (rnc_to_dev(sci_rnc)->is_direct_attached) { + if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + if (sci_dev->is_direct_attached) { /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ sci_base_state_machine_change_state( &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); } else { sci_base_state_machine_change_state( &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ); + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE); } - - status = SCI_SUCCESS; - } else { + } else status = SCI_FAILURE; - } return status; } @@ -932,6 +914,7 @@ static void scic_sds_remote_node_context_validate_context_buffer( struct scic_sds_remote_node_context *sci_rnc) { struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + struct domain_device *dev = sci_dev_to_domain(sci_dev); union scu_remote_node_context *rnc_buffer; rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( @@ -942,7 +925,7 @@ static void scic_sds_remote_node_context_validate_context_buffer( rnc_buffer->ssp.is_valid = true; if (!sci_dev->is_direct_attached && - sci_dev->target_protocols.u.bits.attached_stp_target) { + (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) { scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_96); } else { @@ -1063,11 +1046,12 @@ static void scic_sds_remote_node_context_resuming_state_enter( struct sci_base_object *object) { struct scic_sds_remote_node_context *rnc; - struct smp_discover_response_protocols protocols; struct scic_sds_remote_device *sci_dev; + struct domain_device *dev; rnc = (struct scic_sds_remote_node_context *)object; sci_dev = rnc_to_dev(rnc); + dev = sci_dev_to_domain(sci_dev); SET_STATE_HANDLER( rnc, @@ -1081,13 +1065,10 @@ static void scic_sds_remote_node_context_resuming_state_enter( * resume because of a target reset we also need to update * the STPTLDARNI register with the RNi of the device */ - scic_remote_device_get_protocols(sci_dev, &protocols); - - if (protocols.u.bits.attached_stp_target == 1 && - sci_dev->is_direct_attached) { + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + sci_dev->is_direct_attached) scic_sds_port_setup_transports(sci_dev->owning_port, rnc->remote_node_index); - } scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); } diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index ff5c05a..281a556 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -175,7 +175,6 @@ static enum sci_status isci_io_request_build( struct isci_request *request, struct isci_remote_device *isci_device) { - struct smp_discover_response_protocols dev_protocols; enum sci_status status = SCI_SUCCESS; struct sas_task *task = isci_request_access_task(request); struct scic_sds_remote_device *sci_device = &isci_device->sci; @@ -228,15 +227,19 @@ static enum sci_status isci_io_request_build( sci_object_set_association(request->sci_request_handle, request); - /* Determine protocol and call the appropriate basic constructor */ - scic_remote_device_get_protocols(sci_device, &dev_protocols); - if (dev_protocols.u.bits.attached_ssp_target) + switch (task->task_proto) { + case SAS_PROTOCOL_SMP: + status = isci_smp_request_build(request); + break; + case SAS_PROTOCOL_SSP: status = isci_request_ssp_request_construct(request); - else if (dev_protocols.u.bits.attached_stp_target) + break; + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: status = isci_request_stp_request_construct(request); - else if (dev_protocols.u.bits.attached_smp_target) - status = isci_smp_request_build(request); - else { + break; + default: dev_warn(&isci_host->pdev->dev, "%s: unknown protocol\n", __func__); return SCI_FAILURE; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index e011d66..c6f1ffd 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -273,15 +273,14 @@ static enum sci_status isci_task_request_build( enum sci_status status = SCI_FAILURE; struct isci_request *request = NULL; struct isci_remote_device *isci_device; -/* struct sci_sas_identify_address_frame_protocols dev_protocols; */ - struct smp_discover_response_protocols dev_protocols; - + struct domain_device *dev; dev_dbg(&isci_host->pdev->dev, "%s: isci_tmf = %p\n", __func__, isci_tmf); isci_device = isci_tmf->device; sci_device = &isci_device->sci; + dev = isci_device->domain_dev; /* do common allocation and init of request object. */ status = isci_request_alloc_tmf( @@ -319,16 +318,8 @@ static enum sci_status isci_task_request_build( request ); - scic_remote_device_get_protocols( - sci_device, - &dev_protocols - ); - - /* let the core do it's protocol - * specific construction. - */ - if (dev_protocols.u.bits.attached_ssp_target) { - + /* XXX convert to get this from task->tproto like other drivers */ + if (dev->dev_type == SAS_END_DEV) { isci_tmf->proto = SAS_PROTOCOL_SSP; status = scic_task_request_construct_ssp( request->sci_request_handle @@ -337,8 +328,7 @@ static enum sci_status isci_task_request_build( goto errout; } - if (dev_protocols.u.bits.attached_stp_target) { - + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { isci_tmf->proto = SAS_PROTOCOL_SATA; status = isci_sata_management_task_request_build(request); -- cgit v0.10.2 From 00d680ef84570bc7aea023772d27e85b0052004c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 25 Apr 2011 14:29:29 -0700 Subject: isci: kill smp_discover_response An lldd need never look at the contents of an smp_discover_response frame. Kill the remaining locations where isci is looking at it: 1/ covering for expanders that do not set the stp_attached bit (already handled by sas_ex_discover_end_dev) 2/ an overkill method to notifiy the rest of the driver about remote_device sas addresses Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index d9c9f33..b57f39c 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -628,202 +628,6 @@ struct smp_response_report_manufacturer_information { }; -#define SMP_RESPONSE_DISCOVER_FORMAT_1_1_SIZE 52 -#define SMP_RESPONSE_DISCOVER_FORMAT_2_SIZE 116 - -/** - * struct smp_discover_response_protocols - This structure depicts the discover - * response where the supported protocols by the remote phy are specified. - * - * For specific information on each of these individual fields please reference - * the SAS specification Link layer section on address frames. - */ -struct smp_discover_response_protocols { - union { - struct { - u16 attached_sata_host:1; - u16 attached_smp_initiator:1; - u16 attached_stp_initiator:1; - u16 attached_ssp_initiator:1; - u16 reserved3:4; - u16 attached_sata_device:1; - u16 attached_smp_target:1; - u16 attached_stp_target:1; - u16 attached_ssp_target:1; - u16 reserved4:3; - u16 attached_sata_port_selector:1; - } bits; - - u16 all; - } u; - -}; - -/** - * struct SMP_RESPONSE_DISCOVER_FORMAT - This structure defines the SMP phy - * discover response format. It handles both SAS1.1 and SAS 2 definitions. - * The unions indicate locations where the SAS specification versions differ - * from one another. - * - * - */ -struct smp_response_discover { - - union { - struct { - u8 reserved[2]; - } sas1_1; - - struct { - u16 expander_change_count; - } sas2; - - } u1; - - u8 reserved1[3]; - u8 phy_identifier; - u8 reserved2[2]; - - union { - struct { - u16 reserved1:4; - u16 attached_device_type:3; - u16 reserved2:1; - u16 negotiated_physical_link_rate:4; - u16 reserved3:4; - } sas1_1; - - struct { - u16 attached_reason:4; - u16 attached_device_type:3; - u16 reserved2:1; - u16 negotiated_logical_link_rate:4; - u16 reserved3:4; - } sas2; - - } u2; - - struct smp_discover_response_protocols protocols; - struct sci_sas_address sas_address; - struct sci_sas_address attached_sas_address; - - u8 attached_phy_identifier; - - union { - struct { - u8 reserved; - } sas1_1; - - struct { - u8 attached_break_reply_capable:1; - u8 attached_requested_inside_zpsds:1; - u8 attached_inside_zpsds_persistent:1; - u8 reserved1:5; - } sas2; - - } u3; - - u8 reserved_for_identify[6]; - - u32 hardware_min_physical_link_rate:4; - u32 programmed_min_physical_link_rate:4; - u32 hardware_max_physical_link_rate:4; - u32 programmed_max_physical_link_rate:4; - u32 phy_change_count:8; - u32 partial_pathway_timeout_value:4; - u32 reserved5:3; - u32 virtual_phy:1; - - u32 routing_attribute:4; - u32 reserved6:4; - u32 connector_type:7; - u32 reserved7:1; - u32 connector_element_index:8; - u32 connector_physical_link:8; - - u16 reserved8; - u16 vendor_specific; - - union { - struct { - /** - * In the SAS 1.1 specification this structure ends after 52 bytes. - * As a result, the contents of this field should never have a - * real value. It is undefined. - */ - u8 undefined[SMP_RESPONSE_DISCOVER_FORMAT_2_SIZE - - SMP_RESPONSE_DISCOVER_FORMAT_1_1_SIZE]; - } sas1_1; - - struct { - struct sci_sas_address attached_device_name; - - u32 zoning_enabled:1; - u32 inside_zpsds:1; - u32 zone_group_persistent:1; - u32 reserved1:1; - u32 requested_inside_zpsds:1; - u32 inside_zpsds_persistent:1; - u32 requested_inside_zpsds_changed_by_expander:1; - u32 reserved2:1; - u32 reserved_for_zoning_fields:16; - u32 zone_group:8; - - u8 self_configuration_status; - u8 self_configuration_levels_completed; - u16 reserved_for_self_config_fields; - - struct sci_sas_address self_configuration_sas_address; - - u32 programmed_phy_capabilities; - u32 current_phy_capabilities; - u32 attached_phy_capabilities; - - u32 reserved3; - - u32 reserved4:16; - u32 negotiated_physical_link_rate:4; - u32 reason:4; - u32 hardware_muxing_supported:1; - u32 negotiated_ssc:1; - u32 reserved5:6; - - u32 default_zoning_enabled:1; - u32 reserved6:1; - u32 default_zone_group_persistent:1; - u32 reserved7:1; - u32 default_requested_inside_zpsds:1; - u32 default_inside_zpsds_persistent:1; - u32 reserved8:2; - u32 reserved9:16; - u32 default_zone_group:8; - - u32 saved_zoning_enabled:1; - u32 reserved10:1; - u32 saved_zone_group_persistent:1; - u32 reserved11:1; - u32 saved_requested_inside_zpsds:1; - u32 saved_inside_zpsds_persistent:1; - u32 reserved12:18; - u32 saved_zone_group:8; - - u32 reserved14:2; - u32 shadow_zone_group_persistent:1; - u32 reserved15:1; - u32 shadow_requested_inside_zpsds:1; - u32 shadow_inside_zpsds_persistent:1; - u32 reserved16:18; - u32 shadow_zone_group:8; - - u8 device_slot_number; - u8 device_slot_group_number; - u8 device_slot_group_output_connector[6]; - } sas2; - - } u4; - -}; - /** * struct smp_response_report_phy_sata - This structure depicts the contents of * the SAS SMP REPORT PHY SATA frame. For specific information on each of @@ -857,7 +661,6 @@ struct smp_response_vendor_specific { union smp_response_body { struct smp_response_report_general report_general; struct smp_response_report_manufacturer_information report_manufacturer_information; - struct smp_response_discover discover; struct smp_response_report_phy_sata report_phy_sata; struct smp_response_vendor_specific vendor_specific_response; }; diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 1790f25..d4009e5 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -339,26 +339,6 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( smp_response_buffer, sizeof(union smp_response_body) / sizeof(u32) ); - if (rsp_hdr->function == SMP_FUNCTION_DISCOVER) { - struct smp_response *smp_resp; - - smp_resp = (struct smp_response *)user_smp_buffer; - - /* - * Some expanders only report an attached SATA device, and - * not an STP target. Since the core depends on the STP - * target attribute to correctly build I/O, set the bit now - * if necessary. */ - if (smp_resp->response.discover.protocols.u.bits.attached_sata_device - && !smp_resp->response.discover.protocols.u.bits.attached_stp_target) { - smp_resp->response.discover.protocols.u.bits.attached_stp_target = 1; - - dev_dbg(scic_to_dev(sci_req->owning_controller), - "%s: scic_sds_smp_request_await_response_frame_handler(0x%p) Found SATA dev, setting STP bit.\n", - __func__, sci_req); - } - } - /* * Don't need to copy to user space. User instead will refer to * core request's response buffer. */ diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index fc79a5b..5ba3b5d 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1533,21 +1533,8 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci return SCI_SUCCESS; } -static void scic_sds_remote_device_get_info_from_smp_discover_response( - struct scic_sds_remote_device *sci_dev, - struct smp_response_discover *discover_response) -{ - /* decode discover_response to set sas_address to sci_dev. */ - sci_dev->device_address.high = - discover_response->attached_sas_address.high; - - sci_dev->device_address.low = - discover_response->attached_sas_address.low; -} - /** * scic_remote_device_ea_construct() - construct expander attached device - * @discover_response: data to build remote device * * Remote node context(s) is/are a global resource allocated by this * routine, freed by scic_remote_device_destruct(). @@ -1559,17 +1546,14 @@ static void scic_sds_remote_device_get_info_from_smp_discover_response( * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct smp_response_discover *discover_response) + struct scic_sds_remote_device *sci_dev) { struct scic_sds_controller *scic = sci_port->owning_controller; struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status; scic_remote_device_construct(sci_port, sci_dev); - - scic_sds_remote_device_get_info_from_smp_discover_response( - sci_dev, discover_response); + memcpy(&sci_dev->device_address, dev->sas_addr, SAS_ADDR_SIZE); status = scic_sds_controller_allocate_remote_node_context( scic, sci_dev, &sci_dev->rnc.remote_node_index); @@ -1605,7 +1589,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay * one another, so this code works for both situations. */ sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(sci_port), - discover_response->u2.sas1_1.negotiated_physical_link_rate); + dev->linkrate); /* / @todo Should I assign the port width by reading all of the phys on the port? */ sci_dev->device_port_width = 1; @@ -1632,117 +1616,35 @@ static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *s return sci_dev->state_handlers->start_handler(sci_dev); } -/** - * isci_remote_device_construct() - This function calls the scic remote device - * construct and start functions, it waits on the remote device start - * completion. - * @port: This parameter specifies the isci port with the remote device. - * @isci_device: This parameter specifies the isci remote device - * - * status from the scic calls, the caller to this function should clean up - * resources as appropriate. - */ -static enum sci_status isci_remote_device_construct( - struct isci_port *port, - struct isci_remote_device *isci_device) +static enum sci_status isci_remote_device_construct(struct isci_port *iport, + struct isci_remote_device *idev) { - enum sci_status status = SCI_SUCCESS; - - if (isci_device->domain_dev->parent && - dev_is_expander(isci_device->domain_dev->parent)) { - int i; - - /* struct smp_response_discover discover_response; */ - struct discover_resp discover_response; - struct domain_device *parent = - isci_device->domain_dev->parent; - - struct expander_device *parent_ex = &parent->ex_dev; - - for (i = 0; i < parent_ex->num_phys; i++) { - - struct ex_phy *phy = &parent_ex->ex_phy[i]; - - if ((phy->phy_state == PHY_VACANT) || - (phy->phy_state == PHY_NOT_PRESENT)) - continue; - - if (SAS_ADDR(phy->attached_sas_addr) - == SAS_ADDR(isci_device->domain_dev->sas_addr)) { - - discover_response.attached_dev_type - = phy->attached_dev_type; - discover_response.linkrate - = phy->linkrate; - discover_response.attached_sata_host - = phy->attached_sata_host; - discover_response.attached_sata_dev - = phy->attached_sata_dev; - discover_response.attached_sata_ps - = phy->attached_sata_ps; - discover_response.iproto - = phy->attached_iproto >> 1; - discover_response.tproto - = phy->attached_tproto >> 1; - memcpy( - discover_response.attached_sas_addr, - phy->attached_sas_addr, - SAS_ADDR_SIZE - ); - discover_response.attached_phy_id - = phy->attached_phy_id; - discover_response.change_count - = phy->phy_change_count; - discover_response.routing_attr - = phy->routing_attr; - discover_response.hmin_linkrate - = phy->phy->minimum_linkrate_hw; - discover_response.hmax_linkrate - = phy->phy->maximum_linkrate_hw; - discover_response.pmin_linkrate - = phy->phy->minimum_linkrate; - discover_response.pmax_linkrate - = phy->phy->maximum_linkrate; - } - } - - - dev_dbg(&port->isci_host->pdev->dev, - "%s: parent->dev_type = EDGE_DEV\n", - __func__); - - status = scic_remote_device_ea_construct(port->sci_port_handle, - &isci_device->sci, - (struct smp_response_discover *)&discover_response); - - } else - status = scic_remote_device_da_construct(port->sci_port_handle, - &isci_device->sci); + struct scic_sds_port *sci_port = iport->sci_port_handle; + struct isci_host *ihost = iport->isci_host; + struct domain_device *dev = idev->domain_dev; + enum sci_status status; + if (dev->parent && dev_is_expander(dev->parent)) + status = scic_remote_device_ea_construct(sci_port, &idev->sci); + else + status = scic_remote_device_da_construct(sci_port, &idev->sci); if (status != SCI_SUCCESS) { - dev_dbg(&port->isci_host->pdev->dev, - "%s: scic_remote_device_da_construct failed - " - "isci_device = %p\n", - __func__, - isci_device); + dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n", + __func__, status); return status; } /* XXX will be killed with sci_base_object removal */ - sci_object_set_association(&isci_device->sci, isci_device); + sci_object_set_association(&idev->sci, idev); /* start the device. */ - status = scic_remote_device_start(&isci_device->sci, - ISCI_REMOTE_DEVICE_START_TIMEOUT); + status = scic_remote_device_start(&idev->sci, ISCI_REMOTE_DEVICE_START_TIMEOUT); - if (status != SCI_SUCCESS) { - dev_warn(&port->isci_host->pdev->dev, - "%s: scic_remote_device_start failed\n", - __func__); - return status; - } + if (status != SCI_SUCCESS) + dev_warn(&ihost->pdev->dev, "remote device start failed: %d\n", + status); return status; } diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 285232f..59f878f 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -124,8 +124,9 @@ static void scic_sds_remote_node_context_construct_buffer( rnc->ssp.logical_port_index = scic_sds_remote_device_get_port_index(sci_dev); - rnc->ssp.remote_sas_address_hi = SCIC_SWAP_DWORD(sci_dev->device_address.high); - rnc->ssp.remote_sas_address_lo = SCIC_SWAP_DWORD(sci_dev->device_address.low); + /* address is always big endian, destination is always little */ + rnc->ssp.remote_sas_address_hi = swab32(sci_dev->device_address.high); + rnc->ssp.remote_sas_address_lo = swab32(sci_dev->device_address.low); rnc->ssp.nexus_loss_timer_enable = true; rnc->ssp.check_bit = false; -- cgit v0.10.2 From a3d568f0dfbb6bc786df04ad13e0b401f80e614c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 26 Apr 2011 09:41:52 -0700 Subject: isci: remove usage of sci_sas_address in scic_sds_remote_device The sas address can be retrieved from the domain device and then converted to the always little-endian format in the remote node context. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 5ba3b5d..1e9e222 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1501,8 +1501,6 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci sci_dev->rnc.remote_node_index = remote_node_index; - scic_sds_port_get_attached_sas_address(sci_port, &sci_dev->device_address); - if (dev->dev_type == SAS_END_DEV) sci_dev->has_ready_substate_machine = false; else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { @@ -1553,7 +1551,6 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci enum sci_status status; scic_remote_device_construct(sci_port, sci_dev); - memcpy(&sci_dev->device_address, dev->sas_addr, SAS_ADDR_SIZE); status = scic_sds_controller_allocate_remote_node_context( scic, sci_dev, &sci_dev->rnc.remote_node_index); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 3982160..f0612d4 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -100,11 +100,6 @@ struct scic_sds_remote_device { enum sas_linkrate connection_rate; /** - * This field contains the device SAS address. - */ - struct sci_sas_address device_address; - - /** * This filed is assinged the value of true if the device is directly * attached to the port. */ diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 59f878f..e83657d 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -110,6 +110,7 @@ static void scic_sds_remote_node_context_construct_buffer( struct domain_device *dev = sci_dev_to_domain(sci_dev); union scu_remote_node_context *rnc; struct scic_sds_controller *scic; + __le64 sas_addr; scic = scic_sds_remote_device_get_controller(sci_dev); @@ -124,9 +125,10 @@ static void scic_sds_remote_node_context_construct_buffer( rnc->ssp.logical_port_index = scic_sds_remote_device_get_port_index(sci_dev); - /* address is always big endian, destination is always little */ - rnc->ssp.remote_sas_address_hi = swab32(sci_dev->device_address.high); - rnc->ssp.remote_sas_address_lo = swab32(sci_dev->device_address.low); + /* sas address is __be64, context ram format is __le64 */ + sas_addr = cpu_to_le64(SAS_ADDR(dev->sas_addr)); + rnc->ssp.remote_sas_address_hi = upper_32_bits(sas_addr); + rnc->ssp.remote_sas_address_lo = lower_32_bits(sas_addr); rnc->ssp.nexus_loss_timer_enable = true; rnc->ssp.check_bit = false; -- cgit v0.10.2 From 1f4fa1f958ca678ea021b95c2799b018b2cebc9c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 26 Apr 2011 11:44:06 -0700 Subject: isci: remove scic_sds_remote_device_get_port_index Longer to type than the open-coded equivalent. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index f0612d4..5b82b9f 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -664,14 +664,6 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab ) /** - * scic_sds_remote_device_get_port_index() - - * - * This macro returns the port index for the devices owning port - */ -#define scic_sds_remote_device_get_port_index(sci_dev) \ - (scic_sds_port_get_index(scic_sds_remote_device_get_port(sci_dev))) - -/** * scic_sds_remote_device_get_index() - * * This macro returns the remote node index for this device object @@ -687,7 +679,7 @@ extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_tab #define scic_sds_remote_device_build_command_context(device, command) \ ((command) \ | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ - | (scic_sds_remote_device_get_port_index((device)) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ + | ((device)->owning_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ | (scic_sds_remote_device_get_index((device))) \ ) diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index e83657d..291df19 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -108,22 +108,20 @@ static void scic_sds_remote_node_context_construct_buffer( { struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); struct domain_device *dev = sci_dev_to_domain(sci_dev); + int rni = sci_rnc->remote_node_index; union scu_remote_node_context *rnc; struct scic_sds_controller *scic; __le64 sas_addr; scic = scic_sds_remote_device_get_controller(sci_dev); - - rnc = scic_sds_controller_get_remote_node_context_buffer( - scic, sci_rnc->remote_node_index); + rnc = scic_sds_controller_get_remote_node_context_buffer(scic, rni); memset(rnc, 0, sizeof(union scu_remote_node_context) * scic_sds_remote_device_node_count(sci_dev)); - rnc->ssp.remote_node_index = sci_rnc->remote_node_index; + rnc->ssp.remote_node_index = rni; rnc->ssp.remote_node_port_width = sci_dev->device_port_width; - rnc->ssp.logical_port_index = - scic_sds_remote_device_get_port_index(sci_dev); + rnc->ssp.logical_port_index = sci_dev->owning_port->physical_port_index; /* sas address is __be64, context ram format is __le64 */ sas_addr = cpu_to_le64(SAS_ADDR(dev->sas_addr)); -- cgit v0.10.2 From 3d6e428c0cd8d234bab0ac93aff9ccffacc8bc7e Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 26 Apr 2011 12:31:37 -0700 Subject: isci: removing non-working ATAPI code Removing not used / bit-rotten ATAPI code. This needs to go back and debugged at a later date. Signed-off-by: Dave Jiang [reflow against devel, delete dead sati headers] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index ccc8c53..fc50ba3 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -2,9 +2,6 @@ #generation of silicon EXTRA_CFLAGS += -DSCIC_SDS_4_ENABLED -#temporary until atapi support ready -EXTRA_CFLAGS += -DDISABLE_ATAPI - EXTRA_CFLAGS += -Idrivers/scsi/isci/core/ -Idrivers/scsi/isci/ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ @@ -17,7 +14,6 @@ isci-objs := init.o phy.o request.o sata.o \ core/scic_sds_controller.o \ core/scic_sds_request.o \ core/scic_sds_stp_request.o \ - core/scic_sds_stp_packet_request.o \ core/scic_sds_port.o \ core/scic_sds_port_configuration_agent.o \ core/scic_sds_phy.o \ diff --git a/drivers/scsi/isci/core/sati_device.h b/drivers/scsi/isci/core/sati_device.h deleted file mode 100644 index 4d1cfde..0000000 --- a/drivers/scsi/isci/core/sati_device.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SATI_DEVICE_H_ -#define _SATI_DEVICE_H_ - -/** - * This file contains all of the defintions for the SATI remote device object. - * Some translations require information to be remembered on a per device - * basis. This information is stored in the object defined in this file. - * - * - */ - -#include "sati_types.h" -#include "intel_ata.h" - -/** - * enum _SATI_DEVICE_STATE - This enumeration depicts the various states - * possible for the a translation remote device object. - * - * - */ -enum sati_device_state { - SATI_DEVICE_STATE_OPERATIONAL, - SATI_DEVICE_STATE_STOPPED, - SATI_DEVICE_STATE_STANDBY, - SATI_DEVICE_STATE_IDLE, - SATI_DEVICE_STATE_DEVICE_FAULT_OCCURRED, - SATI_DEVICE_STATE_FORMAT_UNIT_IN_PROGRESS, - SATI_DEVICE_STATE_SELF_TEST_IN_PROGRESS, - SATI_DEVICE_STATE_SEQUENCE_INCOMPLETE, - SATI_DEVICE_STATE_UNIT_ATTENTION_CONDITION - -}; - -/** - * - * - * SATI_DEVICE_CAPABILITIES These constants define the various capabilities - * that a remote device may support for which there is an impact on translation. - */ -#define SATI_DEVICE_CAP_UDMA_ENABLE 0x00000001 -#define SATI_DEVICE_CAP_NCQ_REQUESTED_ENABLE 0x00000002 -#define SATI_DEVICE_CAP_NCQ_SUPPORTED_ENABLE 0x00000004 -#define SATI_DEVICE_CAP_48BIT_ENABLE 0x00000008 -#define SATI_DEVICE_CAP_DMA_FUA_ENABLE 0x00000010 -#define SATI_DEVICE_CAP_SMART_SUPPORT 0x00000020 -#define SATI_DEVICE_CAP_REMOVABLE_MEDIA 0x00000040 -#define SATI_DEVICE_CAP_SMART_ENABLE 0x00000080 -#define SATI_DEVICE_CAP_WRITE_UNCORRECTABLE_ENABLE 0x00000100 -#define SATI_DEVICE_CAP_MULTIPLE_SECTORS_PER_PHYSCIAL_SECTOR 0x00000200 -#define SATI_DEVICE_CAP_SMART_SELF_TEST_SUPPORT 0x00000400 - - -/** - * struct sati_device - The SATI_DEVICE structure define the state of the - * remote device with respect to translation. - * - * - */ -struct sati_device { - /** - * This field simply dictates the state of the SATI device. - */ - enum sati_device_state state; - - /** - * This field indicates features supported by the remote device that - * impact translation execution. - */ - u16 capabilities; - - /** - * This field indicates the depth of the native command queue supported - * by the device. - */ - u8 ncq_depth; - - /** - * This field stores the additional sense code for a unit attention - * condition. - */ - u8 unit_attention_asc; - - /** - * This field indicates the additional sense code qualifier for a unit - * attention condition. - */ - u8 unit_attention_ascq; - -}; - -void sati_device_construct( - struct sati_device *device, - bool is_ncq_enabled, - u8 max_ncq_depth); - -void sati_device_update_capabilities( - struct sati_device *device, - struct ata_identify_device_data *identify); - -#endif /* _SATI_TRANSLATOR_SEQUENCE_H_ */ - diff --git a/drivers/scsi/isci/core/sati_translator_sequence.h b/drivers/scsi/isci/core/sati_translator_sequence.h deleted file mode 100644 index 915724c..0000000 --- a/drivers/scsi/isci/core/sati_translator_sequence.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SATI_TRANSLATOR_SEQUENCE_H_ -#define _SATI_TRANSLATOR_SEQUENCE_H_ - -/** - * This file contains all of the defintions for the SATI translator sequence. - * A translator sequence is simply a defintion for the various sequences of - * commands that occur in this translator. - * - * - */ - -#include "sati_device.h" - -/** - * enum _sati_translator_sequence_type - This enumeration defines the possible - * sequence types for the translator. - * - * - */ -enum sati_translator_sequence_type { - /* SCSI Primary Command (SPC) sequences. */ - SATI_SEQUENCE_REPORT_LUNS, - SATI_SEQUENCE_TEST_UNIT_READY, - SATI_SEQUENCE_INQUIRY_STANDARD, - SATI_SEQUENCE_INQUIRY_SUPPORTED_PAGES, - SATI_SEQUENCE_INQUIRY_SERIAL_NUMBER, - SATI_SEQUENCE_INQUIRY_DEVICE_ID, - SATI_SEQUENCE_INQUIRY_BLOCK_DEVICE, - SATI_SEQUENCE_MODE_SENSE_6_CACHING, - SATI_SEQUENCE_MODE_SENSE_6_INFORMATIONAL_EXCP_CONTROL, - SATI_SEQUENCE_MODE_SENSE_6_READ_WRITE_ERROR, - SATI_SEQUENCE_MODE_SENSE_6_DISCONNECT_RECONNECT, - SATI_SEQUENCE_MODE_SENSE_6_CONTROL, - SATI_SEQUENCE_MODE_SENSE_6_ALL_PAGES, - SATI_SEQUENCE_MODE_SENSE_10_CACHING, - SATI_SEQUENCE_MODE_SENSE_10_INFORMATIONAL_EXCP_CONTROL, - SATI_SEQUENCE_MODE_SENSE_10_READ_WRITE_ERROR, - SATI_SEQUENCE_MODE_SENSE_10_DISCONNECT_RECONNECT, - SATI_SEQUENCE_MODE_SENSE_10_CONTROL, - SATI_SEQUENCE_MODE_SENSE_10_ALL_PAGES, - SATI_SEQUENCE_MODE_SELECT_MODE_PAGE_CACHING, - SATI_SEQUENCE_MODE_SELECT_MODE_POWER_CONDITION, - SATI_SEQUENCE_MODE_SELECT_MODE_INFORMATION_EXCEPT_CONTROL, - - /* Log Sense Sequences */ - SATI_SEQUENCE_LOG_SENSE_SELF_TEST_LOG_PAGE, - SATI_SEQUENCE_LOG_SENSE_EXTENDED_SELF_TEST_LOG_PAGE, - SATI_SEQUENCE_LOG_SENSE_SUPPORTED_LOG_PAGE, - SATI_SEQUENCE_LOG_SENSE_INFO_EXCEPTION_LOG_PAGE, - - /* SCSI Block Command (SBC) sequences. */ - - SATI_SEQUENCE_READ_6, - SATI_SEQUENCE_READ_10, - SATI_SEQUENCE_READ_12, - SATI_SEQUENCE_READ_16, - - SATI_SEQUENCE_READ_CAPACITY_10, - SATI_SEQUENCE_READ_CAPACITY_16, - - SATI_SEQUENCE_SYNCHRONIZE_CACHE, - - SATI_SEQUENCE_VERIFY_10, - SATI_SEQUENCE_VERIFY_12, - SATI_SEQUENCE_VERIFY_16, - - SATI_SEQUENCE_WRITE_6, - SATI_SEQUENCE_WRITE_10, - SATI_SEQUENCE_WRITE_12, - SATI_SEQUENCE_WRITE_16, - - SATI_SEQUENCE_START_STOP_UNIT, - - SATI_SEQUENCE_REASSIGN_BLOCKS, - - /* SCSI Task Requests sequences */ - - SATI_SEQUENCE_LUN_RESET, - - SATI_SEQUENCE_REQUEST_SENSE_SMART_RETURN_STATUS, - SATI_SEQUENCE_REQUEST_SENSE_CHECK_POWER_MODE, - - SATI_SEQUENCE_WRITE_LONG - -}; - -#define SATI_SEQUENCE_TYPE_READ_MIN SATI_SEQUENCE_READ_6 -#define SATI_SEQUENCE_TYPE_READ_MAX SATI_SEQUENCE_READ_16 - -/** - * - * - * SATI_SEQUENCE_STATES These constants depict the various state values - * associated with a translation sequence. - */ -#define SATI_SEQUENCE_STATE_INITIAL 0 -#define SATI_SEQUENCE_STATE_TRANSLATE_DATA 1 -#define SATI_SEQUENCE_STATE_AWAIT_RESPONSE 2 -#define SATI_SEQUENCE_STATE_FINAL 3 -#define SATI_SEQUENCE_STATE_INCOMPLETE 4 - -/** - * - * - * SATI_DATA_DIRECTIONS These constants depict the various types of data - * directions for a translation sequence. Data can flow in/out (read/write) or - * no data at all. - */ -#define SATI_DATA_DIRECTION_NONE 0 -#define SATI_DATA_DIRECTION_IN 1 -#define SATI_DATA_DIRECTION_OUT 2 - -/** - * struct SATI_MODE_SELECT_PROCESSING_STATE - This structure contains all of - * the current processing states for processing mode select 6 and 10 - * commands' parameter fields. - * - * - */ -struct sati_mode_select_processing_state { - u8 *mode_pages; - u32 mode_page_offset; - u32 mode_pages_size; - u32 size_of_data_processed; - u32 total_ata_command_sent; - u32 ata_command_sent_for_cmp; /* cmp: current mode page */ - bool current_mode_page_processed; -}; - - -enum sati_reassign_blocks_ata_command_status { - SATI_REASSIGN_BLOCKS_READY_TO_SEND, - SATI_REASSIGN_BLOCKS_COMMAND_FAIL, - SATI_REASSIGN_BLOCKS_COMMAND_SUCCESS, -}; - -/** - * struct sati_reassign_blocks_processing_state - This structure contains all - * of the current processing states for processing reassign block command's - * parameter fields. - * - * - */ -struct sati_reassign_blocks_processing_state { - u32 lba_offset; - u32 block_lists_size; - u8 lba_size; - u32 size_of_data_processed; - u32 ata_command_sent_for_current_lba; - bool current_lba_processed; - enum sati_reassign_blocks_ata_command_status ata_command_status; - -}; - -#define SATI_ATAPI_REQUEST_SENSE_CDB_LENGTH 12 - -/** - * struct sati_atapi_data - The SATI_ATAPI_DATA structure is for sati atapi IO - * specific data. - * - * - */ -struct sati_atapi_data { - u8 request_sense_cdb[SATI_ATAPI_REQUEST_SENSE_CDB_LENGTH]; -}; - -/** - * struct sati_translator_sequence - This structure contains all of the - * translation information associated with a particular request. - * - * - */ -struct sati_translator_sequence { - /** - * This field contains the sequence type determined by the SATI. - */ - u8 type; - - /** - * This field indicates the current state for the sequence. - */ - u8 state; - - /** - * This field indicates the data direction (none, read, or write) for - * the translated request. - */ - u8 data_direction; - - /** - * This field contains the SATA/ATA protocol to be utilized during - * the IO transfer. - */ - u8 protocol; - - /** - * This field is utilized for sequences requiring data translation. - * It specifies the amount of data requested by the caller from the - * operation. It's necessary, because at times the user requests less - * data than is available. Thus, we need to avoid overrunning the - * buffer. - */ - u32 allocation_length; - - /** - * This field specifies the amount of data that will actually be - * transfered across the wire for this ATA request. - */ - u32 ata_transfer_length; - - /** - * This field specifies the amount of data bytes that have been - * set in a translation sequence. It will be incremented every time - * a data byte has been set by a sati translation. - */ - u16 number_data_bytes_set; - - /** - * This field indicates whether or not the sense response has been set - * by the translation sequence. - */ - bool is_sense_response_set; - - /** - * This field specifies the remote device context for which this - * translator sequence is destined. - */ - struct sati_device *device; - - /** - * This field is utilized to provide the translator with memory space - * required for translations that utilize multiple requests. - */ - union { - u32 translated_command; - u32 move_sector_count; - u32 scratch; - struct sati_reassign_blocks_processing_state - reassign_blocks_process_state; - struct sati_mode_select_processing_state process_state; - struct sati_atapi_data sati_atapi_data; - } command_specific_data; - -}; - - - -#endif /* _SATI_TRANSLATOR_SEQUENCE_H_ */ - diff --git a/drivers/scsi/isci/core/sati_types.h b/drivers/scsi/isci/core/sati_types.h deleted file mode 100644 index b6159e0..0000000 --- a/drivers/scsi/isci/core/sati_types.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SATI_TYPES_H_ -#define _SATI_TYPES_H_ - -/** - * This file contains various type definitions to be utilized with SCSI to ATA - * Translation Implementation. - * - * - */ - -/** - * enum _SATI_STATUS - This enumeration defines the possible return values from - * the SATI translation methods. - * - * - */ -enum sati_status { - /** - * This indicates that the translation was supported and occurred - * without error. - */ - SATI_SUCCESS, - - /** - * This indicates that the translation was supported, occurred without - * error, and no additional translation is necessary. This is done in - * conditions where the SCSI command doesn't require any interaction with - * the remote device. - */ - SATI_COMPLETE, - - /** - * This indicated everything SATI_COMPLETE does in addition to the response data - * not using all the memory allocated by the OS. - */ - SATI_COMPLETE_IO_DONE_EARLY, - - /** - * This indicates that translator sequence has finished some specific - * command in the sequence, but additional commands are necessary. - */ - SATI_SEQUENCE_INCOMPLETE, - - /** - * This indicates a general failure has occurred for which no further - * specification information is available. - */ - SATI_FAILURE, - - /** - * This indicates that the result of the IO request indicates a - * failure. The caller should reference the corresponding response - * data for further details. - */ - SATI_FAILURE_CHECK_RESPONSE_DATA, - - /** - * This status indicates that the supplied sequence type doesn't map - * to an existing definition. - */ - SATI_FAILURE_INVALID_SEQUENCE_TYPE, - - /** - * This status indicates that the supplied sequence state doesn't match - * the operation being requested by the user. - */ - SATI_FAILURE_INVALID_STATE - -}; - -#if (!defined(DISABLE_SATI_MODE_SENSE) \ - || !defined(DISABLE_SATI_MODE_SELECT) \ - || !defined(DISABLE_SATI_REQUEST_SENSE)) \ - -#if !defined(ENABLE_SATI_MODE_PAGES) -/** - * - * - * This macro enables the common mode page data structures and code. Currently, - * MODE SENSE, MODE SELECT, and REQUEST SENSE all make reference to this common - * code. As a result, enable the common mode page code if any of these 3 are - * being translated. - */ -#define ENABLE_SATI_MODE_PAGES -#endif /* !defined(ENABLE_SATI_MODE_PAGES) */ - -#endif /* MODE_SENSE/SELECT/REQUEST_SENSE */ - -#endif /* _SATI_TYPES_H_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index a66e7b2..395080d 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -73,10 +73,6 @@ #include "scu_constants.h" #include "scu_task_context.h" -#if !defined(DISABLE_ATAPI) -#include "scic_sds_stp_packet_request.h" -#endif - /* * **************************************************************************** * * SCIC SDS IO REQUEST CONSTANTS @@ -670,16 +666,6 @@ static enum sci_status scic_io_request_construct_sata(struct scic_sds_request *s status = scic_sds_stp_ncq_request_construct(sci_req, len, dir); break; -#if !defined(DISABLE_ATAPI) - case SAT_PROTOCOL_PACKET_NON_DATA: - case SAT_PROTOCOL_PACKET_DMA_DATA_IN: - case SAT_PROTOCOL_PACKET_DMA_DATA_OUT: - case SAT_PROTOCOL_PACKET_PIO_DATA_IN: - case SAT_PROTOCOL_PACKET_PIO_DATA_OUT: - status = scic_sds_stp_packet_request_construct(sci_req); - break; -#endif - case SAT_PROTOCOL_DMA_QUEUED: case SAT_PROTOCOL_DMA: case SAT_PROTOCOL_DEVICE_DIAGNOSTIC: diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c deleted file mode 100644 index 1cb77bb..0000000 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c +++ /dev/null @@ -1,805 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#if !defined(DISABLE_ATAPI) - -#include "intel_ata.h" -#include "intel_sas.h" -#include "intel_sata.h" -#include "intel_sat.h" -#include "sati_translator_sequence.h" -#include "sci_base_state.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" -#include "remote_device.h" -#include "scic_sds_request.h" -#include "scic_sds_stp_packet_request.h" -#include "scic_user_callback.h" -#include "sci_util.h" -#include "scu_completion_codes.h" -#include "scu_task_context.h" - - -/** - * This method will fill in the SCU Task Context for a PACKET fis. And - * construct the request STARTED sub-state machine for Packet Protocol IO. - * @sci_req: This parameter specifies the stp packet request object being - * constructed. - * - */ -enum sci_status scic_sds_stp_packet_request_construct( - struct scic_sds_request *sci_req) -{ - struct sata_fis_reg_h2d *h2d_fis = - scic_stp_io_request_get_h2d_reg_address( - sci_req - ); - - /* - * Work around, we currently only support PACKET DMA protocol, so we - * need to make change to Packet Fis features field. */ - h2d_fis->features = h2d_fis->features | ATA_PACKET_FEATURE_DMA; - - scic_sds_stp_non_ncq_request_construct(sci_req); - - /* Build the Packet Fis task context structure */ - scu_stp_raw_request_construct_task_context( - (struct scic_sds_stp_request *)sci_req, - sci_req->task_context_buffer - ); - - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - &sci_req->parent.parent, - scic_sds_stp_packet_request_started_substate_table, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE - ); - - return SCI_SUCCESS; -} - - -/** - * This method will fill in the SCU Task Context for a Packet request command - * phase in PACKET DMA DATA (IN/OUT) type. The following important settings - * are utilized: -# task_type == SCU_TASK_TYPE_PACKET_DMA. This simply - * indicates that a normal request type (i.e. non-raw frame) is being - * utilized to perform task management. -# control_frame == 1. This ensures - * that the proper endianess is set so that the bytes are transmitted in the - * right order for a smp request frame. - * @sci_req: This parameter specifies the smp request object being - * constructed. - * @task_context: The task_context to be reconstruct for packet request command - * phase. - * - */ -void scu_stp_packet_request_command_phase_construct_task_context( - struct scic_sds_request *sci_req, - struct scu_task_context *task_context) -{ - void *atapi_cdb; - u32 atapi_cdb_length; - struct scic_sds_stp_request *stp_request = (struct scic_sds_stp_request *)sci_req; - - /* - * reference: SSTL 1.13.4.2 - * task_type, sata_direction */ - if (scic_cb_io_request_get_data_direction(sci_req->user_request) - == SCI_IO_REQUEST_DATA_OUT) { - task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_OUT; - task_context->sata_direction = 0; - } else { /* todo: for NO_DATA command, we need to send out raw frame. */ - task_context->task_type = SCU_TASK_TYPE_PACKET_DMA_IN; - task_context->sata_direction = 1; - } - - /* sata header */ - memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context)); - task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; - - /* - * Copy in the command IU with CDB so that the commandIU address doesn't - * change. */ - memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); - - atapi_cdb = - scic_cb_stp_packet_io_request_get_cdb_address(sci_req->user_request); - - atapi_cdb_length = - scic_cb_stp_packet_io_request_get_cdb_length(sci_req->user_request); - - memcpy(((u8 *)sci_req->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); - - atapi_cdb_length = - max(atapi_cdb_length, stp_request->type.packet.device_preferred_cdb_length); - - task_context->ssp_command_iu_length = - ((atapi_cdb_length % 4) == 0) ? - (atapi_cdb_length / 4) : ((atapi_cdb_length / 4) + 1); - - /* task phase is set to TX_CMD */ - task_context->task_phase = 0x1; - - /* retry counter */ - task_context->stp_retry_count = 0; - - if (scic_cb_request_is_initial_construction(sci_req->user_request)) { - /* data transfer size. */ - task_context->transfer_length_bytes = - scic_cb_io_request_get_transfer_length(sci_req->user_request); - - /* setup sgl */ - scic_sds_request_build_sgl(sci_req); - } else { - /* data transfer size, need to be 4 bytes aligned. */ - task_context->transfer_length_bytes = (SCSI_FIXED_SENSE_DATA_BASE_LENGTH + 2); - - scic_sds_stp_packet_internal_request_sense_build_sgl(sci_req); - } -} - -/** - * This method will fill in the SCU Task Context for a DATA fis containing CDB - * in Raw Frame type. The TC for previous Packet fis was already there, we - * only need to change the H2D fis content. - * @sci_req: This parameter specifies the smp request object being - * constructed. - * @task_context: The task_context to be reconstruct for packet request command - * phase. - * - */ -void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( - struct scic_sds_request *sci_req, - struct scu_task_context *task_context) -{ - void *atapi_cdb = - scic_cb_stp_packet_io_request_get_cdb_address(sci_req->user_request); - - u32 atapi_cdb_length = - scic_cb_stp_packet_io_request_get_cdb_length(sci_req->user_request); - - memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); - memcpy(((u8 *)sci_req->command_buffer + sizeof(u32)), atapi_cdb, atapi_cdb_length); - - memset(&(task_context->type.stp), 0, sizeof(struct stp_task_context)); - task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; - - /* - * Note the data send out has to be 4 bytes aligned. Or else out hardware will - * patch non-zero bytes and cause the target device unhappy. */ - task_context->transfer_length_bytes = 12; -} - - -/* - * *@brief This methods decode the D2H status FIS and retrieve the sense data, - * then pass the sense data to user request. - * - ***@param[in] sci_req The request receive D2H status FIS. - ***@param[in] status_fis The D2H status fis to be processed. - * - */ -enum sci_status scic_sds_stp_packet_request_process_status_fis( - struct scic_sds_request *sci_req, - struct sata_fis_reg_d2h *status_fis) -{ - enum sci_status status = SCI_SUCCESS; - - /* TODO: Process the error status fis, retrieve sense data. */ - if (status_fis->status & ATA_STATUS_REG_ERROR_BIT) - status = SCI_FAILURE_IO_RESPONSE_VALID; - - return status; -} - -/* - * *@brief This methods builds sgl for internal REQUEST SENSE stp packet - * command using this request response buffer, only one sge is - * needed. - * - ***@param[in] sci_req The request receive request sense data. - * - */ -void scic_sds_stp_packet_internal_request_sense_build_sgl( - struct scic_sds_request *sds_request) -{ - void *sge; - struct scu_sgl_element_pair *scu_sgl_list = NULL; - struct scu_task_context *task_context; - dma_addr_t dma_addr; - - struct sci_ssp_response_iu *rsp_iu = - (struct sci_ssp_response_iu *)sds_request->response_buffer; - - sge = (void *)&rsp_iu->data[0]; - - task_context = - (struct scu_task_context *)sds_request->task_context_buffer; - scu_sgl_list = &task_context->sgl_pair_ab; - - dma_addr = scic_io_request_get_dma_addr(sds_request, sge); - - scu_sgl_list->A.address_upper = upper_32_bits(dma_addr); - scu_sgl_list->A.address_lower = lower_32_bits(dma_addr); - scu_sgl_list->A.length = task_context->transfer_length_bytes; - scu_sgl_list->A.address_modifier = 0; - - SCU_SGL_ZERO(scu_sgl_list->B); -} - -/** - * This method processes the completions transport layer (TL) status to - * determine if the Packet FIS was sent successfully. If the Packet FIS was - * sent successfully, then the state for the Packet request transits to - * waiting for a PIO SETUP frame. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -enum sci_status scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - break; - } - - return status; -} - - -/** - * This method processes an unsolicited frame while the Packet request is - * waiting for a PIO SETUP FIS. It will release the unsolicited frame, and - * transition the request to the COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE - * state. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This method returns an indication of whether the pio setup frame was handled - * successfully or not. SCI_SUCCESS Currently this value is always returned and - * indicates successful processing of the TC response. - */ -enum sci_status scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - enum sci_status status; - struct sata_fis_header *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *sci_req; - - sci_req = (struct scic_sds_stp_request *)request; - - status = scic_sds_unsolicited_frame_control_get_header( - &(sci_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_header - ); - - if (status == SCI_SUCCESS) { - BUG_ON(frame_header->fis_type != SATA_FIS_TYPE_PIO_SETUP); - - /* - * Get from the frame buffer the PIO Setup Data, although we don't need - * any info from this pio setup fis. */ - scic_sds_unsolicited_frame_control_get_buffer( - &(sci_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_buffer - ); - - /* - * Get the data from the PIO Setup - * The SCU Hardware returns first word in the frame_header and the rest - * of the data is in the frame buffer so we need to back up one dword */ - sci_req->type.packet.device_preferred_cdb_length = - (u16)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->transfter_count; - - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame( - sci_req->parent.owning_controller, frame_index - ); - - sci_base_state_machine_change_state( - &sci_req->parent.started_substate_machine, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE - ); - } else - dev_err(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, sci_req, frame_index, status); - - return status; -} - - -/** - * This method processes the completions transport layer (TL) status to - * determine if the PACKET command data FIS was sent successfully. If - * successfully, then the state for the packet request transits to COMPLETE - * state. If not successfuly, the request transits to - * COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - u8 sat_packet_protocol = - scic_cb_request_get_sat_protocol(sci_req->user_request); - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - if (sat_packet_protocol == SAT_PROTOCOL_PACKET_DMA_DATA_IN - || sat_packet_protocol == SAT_PROTOCOL_PACKET_DMA_DATA_OUT - ) - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - else - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE - ); - break; - - case (SCU_TASK_DONE_UNEXP_FIS << SCU_COMPLETION_TL_STATUS_SHIFT): - if (scic_io_request_get_number_of_bytes_transferred(sci_req) < - scic_cb_io_request_get_transfer_length(sci_req->user_request)) { - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY - ); - - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - - status = sci_req->sci_status; - } - break; - - case (SCU_TASK_DONE_EXCESS_DATA << SCU_COMPLETION_TL_STATUS_SHIFT): - /* In this case, there is no UF coming after. compelte the IO now. */ - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - - break; - - default: - if (sci_req->sci_status != SCI_SUCCESS) { /* The io status was set already. This means an UF for the status - * fis was received already. - */ - - /* - * A device suspension event is expected, we need to have the device - * coming out of suspension, then complete the IO. */ - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE - ); - - /* change the device state to ATAPI_ERROR. */ - sci_base_state_machine_change_state( - &sci_req->target_device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR - ); - - status = sci_req->sci_status; - } else { /* If receiving any non-sucess TC status, no UF received yet, then an UF for - * the status fis is coming after. - */ - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE - ); - } - break; - } - - return status; -} - - -/** - * This method processes an unsolicited frame. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This method returns an indication of whether the UF frame was handled - * successfully or not. SCI_SUCCESS Currently this value is always returned and - * indicates successful processing of the TC response. - */ -enum sci_status scic_sds_stp_packet_request_command_phase_common_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - enum sci_status status; - struct sata_fis_header *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *sci_req; - - sci_req = (struct scic_sds_stp_request *)request; - - status = scic_sds_unsolicited_frame_control_get_header( - &(sci_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_header - ); - - if (status == SCI_SUCCESS) { - BUG_ON(frame_header->fis_type != SATA_FIS_TYPE_REGD2H); - - /* - * Get from the frame buffer the PIO Setup Data, although we don't need - * any info from this pio setup fis. */ - scic_sds_unsolicited_frame_control_get_buffer( - &(sci_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_buffer - ); - - scic_sds_controller_copy_sata_response( - &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer - ); - - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame( - sci_req->parent.owning_controller, frame_index - ); - } - - return status; -} - -/** - * This method processes an unsolicited frame while the packet request is - * expecting TC completion. It will process the FIS and construct sense data. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This method returns an indication of whether the UF frame was handled - * successfully or not. SCI_SUCCESS Currently this value is always returned and - * indicates successful processing of the TC response. - */ -enum sci_status scic_sds_stp_packet_request_command_phase_await_tc_completion_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; - - enum sci_status status = - scic_sds_stp_packet_request_command_phase_common_frame_handler( - request, frame_index); - - if (status == SCI_SUCCESS) { - /* The command has completed with error status from target device. */ - status = scic_sds_stp_packet_request_process_status_fis( - request, &sci_req->d2h_reg_fis); - - if (status != SCI_SUCCESS) { - scic_sds_request_set_status( - &sci_req->parent, - SCU_TASK_DONE_CHECK_RESPONSE, - status - ); - } else - scic_sds_request_set_status( - &sci_req->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - } - - return status; -} - - -/** - * This method processes an unsolicited frame while the packet request is - * expecting TC completion. It will process the FIS and construct sense data. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This method returns an indication of whether the UF frame was handled - * successfully or not. SCI_SUCCESS Currently this value is always returned and - * indicates successful processing of the TC response. - */ -enum sci_status scic_sds_stp_packet_request_command_phase_await_d2h_fis_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - enum sci_status status = - scic_sds_stp_packet_request_command_phase_common_frame_handler( - request, frame_index); - - struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; - - if (status == SCI_SUCCESS) { - /* The command has completed with error status from target device. */ - status = scic_sds_stp_packet_request_process_status_fis( - request, &sci_req->d2h_reg_fis); - - if (status != SCI_SUCCESS) { - scic_sds_request_set_status( - request, - SCU_TASK_DONE_CHECK_RESPONSE, - status - ); - } else - scic_sds_request_set_status( - request, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - /* - * Always complete the NON_DATA command right away, no need to delay completion - * even an error status fis came from target device. */ - sci_base_state_machine_change_state( - &request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - } - - return status; -} - -enum sci_status scic_sds_stp_packet_request_started_completion_delay_complete_handler( - struct scic_sds_request *request) -{ - sci_base_state_machine_change_state(&request->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - return request->sci_status; -} - -/* --------------------------------------------------------------------------- */ - -const struct scic_sds_io_request_state_handler scic_sds_stp_packet_request_started_substate_handler_table[] = { - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_packet_request_packet_phase_await_tc_completion_tc_completion_handler, - }, - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE] = { - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_packet_request_packet_phase_await_pio_setup_frame_handler - }, - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_packet_request_command_phase_await_tc_completion_tc_completion_handler, - .frame_handler = scic_sds_stp_packet_request_command_phase_await_tc_completion_frame_handler - }, - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE] = { - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_packet_request_command_phase_await_d2h_fis_frame_handler - }, - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE] = { - .parent.abort_handler = scic_sds_request_started_state_abort_handler, - .parent.complete_handler = scic_sds_stp_packet_request_started_completion_delay_complete_handler, - }, -}; - -void scic_sds_stp_packet_request_started_packet_phase_await_tc_completion_enter( - struct sci_base_object *object) -{ - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_packet_request_started_substate_handler_table, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req - ); -} - -void scic_sds_stp_packet_request_started_packet_phase_await_pio_setup_enter( - struct sci_base_object *object) -{ - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_packet_request_started_substate_handler_table, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE - ); -} - -void scic_sds_stp_packet_request_started_command_phase_await_tc_completion_enter( - struct sci_base_object *object) -{ - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; - u8 sat_packet_protocol = - scic_cb_request_get_sat_protocol(sci_req->user_request); - - struct scu_task_context *task_context; - enum sci_status status; - - /* - * Recycle the TC and reconstruct it for sending out data fis containing - * CDB. */ - task_context = scic_sds_controller_get_task_context_buffer( - sci_req->owning_controller, sci_req->io_tag); - - if (sat_packet_protocol == SAT_PROTOCOL_PACKET_NON_DATA) - scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( - sci_req, task_context); - else - scu_stp_packet_request_command_phase_construct_task_context( - sci_req, task_context); - - /* send the new TC out. */ - status = sci_req->owning_controller->state_handlers->parent.continue_io_handler( - &sci_req->owning_controller->parent, - &sci_req->target_device->parent, - &sci_req->parent - ); - - if (status == SCI_SUCCESS) - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_packet_request_started_substate_handler_table, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE - ); -} - -void scic_sds_stp_packet_request_started_command_phase_await_d2h_fis_enter( - struct sci_base_object *object) -{ - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_packet_request_started_substate_handler_table, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE - ); -} - -void scic_sds_stp_packet_request_started_completion_delay_enter( - struct sci_base_object *object) -{ - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_packet_request_started_substate_handler_table, - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE - ); -} - - -/* --------------------------------------------------------------------------- */ -const struct sci_base_state scic_sds_stp_packet_request_started_substate_table[] = { - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_packet_request_started_packet_phase_await_tc_completion_enter, - }, - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE] = { - .enter_state = scic_sds_stp_packet_request_started_packet_phase_await_pio_setup_enter, - }, - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_packet_request_started_command_phase_await_tc_completion_enter, - }, - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE] = { - .enter_state = scic_sds_stp_packet_request_started_command_phase_await_d2h_fis_enter, - }, - [SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE] = { - .enter_state scic_sds_stp_packet_request_started_completion_delay_enter, - } -}; - -#endif /* !defined(DISABLE_ATAPI) */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h index f6ff5a6..5d45ef6 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h @@ -104,50 +104,11 @@ enum _scic_sds_stp_packet_request_started_substates { SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE, }; - - -#if !defined(DISABLE_ATAPI) -extern const struct sci_base_state scic_sds_stp_packet_request_started_substate_table[]; -extern const struct scic_sds_io_request_state_handler scic_sds_stp_packet_request_started_substate_handler_table[]; -#endif /* !defined(DISABLE_ATAPI) */ - -#if !defined(DISABLE_ATAPI) -enum sci_status scic_sds_stp_packet_request_construct( - struct scic_sds_request *sci_req); -#else /* !defined(DISABLE_ATAPI) */ #define scic_sds_stp_packet_request_construct(request) SCI_FAILURE -#endif /* !defined(DISABLE_ATAPI) */ - -#if !defined(DISABLE_ATAPI) -void scu_stp_packet_request_command_phase_construct_task_context( - struct scic_sds_request *sci_req, - struct scu_task_context *task_context); -#else /* !defined(DISABLE_ATAPI) */ #define scu_stp_packet_request_command_phase_construct_task_context(reqeust, tc) -#endif /* !defined(DISABLE_ATAPI) */ - -#if !defined(DISABLE_ATAPI) -void scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context( - struct scic_sds_request *sci_req, - struct scu_task_context *task_context); -#else /* !defined(DISABLE_ATAPI) */ #define scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context(reqeust, tc) -#endif /* !defined(DISABLE_ATAPI) */ - -#if !defined(DISABLE_ATAPI) -enum sci_status scic_sds_stp_packet_request_process_status_fis( - struct scic_sds_request *sci_req, - struct sata_fis_reg_d2h *status_fis); -#else /* !defined(DISABLE_ATAPI) */ #define scic_sds_stp_packet_request_process_status_fis(reqeust, fis) SCI_FAILURE -#endif /* !defined(DISABLE_ATAPI) */ - -#if !defined(DISABLE_ATAPI) -void scic_sds_stp_packet_internal_request_sense_build_sgl( - struct scic_sds_request *sci_req); -#else /* !defined(DISABLE_ATAPI) */ #define scic_sds_stp_packet_internal_request_sense_build_sgl(request) -#endif /* !defined(DISABLE_ATAPI) */ #endif /* _SCIC_SDS_STP_PACKET_REQUEST_H_ */ diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 1e9e222..6d5ab72 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -99,15 +99,6 @@ enum sas_linkrate scic_remote_device_get_connection_rate( return sci_dev->connection_rate; } - -#if !defined(DISABLE_ATAPI) -bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->is_atapi; -} -#endif - - /** * * @@ -217,16 +208,6 @@ enum sci_status scic_sds_remote_device_start_task( /** * - * @controller: The controller that is completing the task request. - * @sci_dev: The remote device for which the complete task handling is - * being requested. - * @io_request: The task request that is being completed. - * - * This method invokes the remote device complete task handler. enum sci_status - */ - -/** - * * @sci_dev: * @request: * @@ -247,47 +228,6 @@ void scic_sds_remote_device_post_request( ); } -#if !defined(DISABLE_ATAPI) -/** - * - * @sci_dev: The device to be checked. - * - * This method check the signature fis of a stp device to decide whether a - * device is atapi or not. true if a device is atapi device. False if a device - * is not atapi. - */ -bool scic_sds_remote_device_is_atapi( - struct scic_sds_remote_device *sci_dev) -{ - if (!sci_dev->target_protocols.u.bits.attached_stp_target) - return false; - else if (sci_dev->is_direct_attached) { - struct scic_sds_phy *phy; - struct scic_sata_phy_properties properties; - struct sata_fis_reg_d2h *signature_fis; - phy = scic_sds_port_get_a_connected_phy(sci_dev->owning_port); - scic_sata_phy_get_properties(phy, &properties); - - /* decode the signature fis. */ - signature_fis = &(properties.signature_fis); - - if ((signature_fis->sector_count == 0x01) - && (signature_fis->lba_low == 0x01) - && (signature_fis->lba_mid == 0x14) - && (signature_fis->lba_high == 0xEB) - && ((signature_fis->device & 0x5F) == 0x00) - ) { - /* An ATA device supporting the PACKET command set. */ - return true; - } else - return false; - } else { - /* Expander supported ATAPI device is not currently supported. */ - return false; - } -} -#endif - /** * * @user_parameter: This is cast to a remote device object. diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 5b82b9f..5cceb6c 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -105,14 +105,6 @@ struct scic_sds_remote_device { */ bool is_direct_attached; -#if !defined(DISABLE_ATAPI) - /** - * This filed is assinged the value of true if the device is an ATAPI - * device. - */ - bool is_atapi; -#endif - /** * This filed contains a pointer back to the port to which this device * is assigned. @@ -254,22 +246,7 @@ enum sci_status scic_remote_device_reset_complete( enum sas_linkrate scic_remote_device_get_connection_rate( struct scic_sds_remote_device *remote_device); -#if !defined(DISABLE_ATAPI) -/** - * scic_remote_device_is_atapi() - - * @this_device: The device whose type is to be decided. - * - * This method first decide whether a device is a stp target, then decode the - * signature fis of a DA STP device to tell whether it is a standard end disk - * or an ATAPI device. bool Indicate a device is ATAPI device or not. - */ -bool scic_remote_device_is_atapi( - struct scic_sds_remote_device *device_handle); -#else /* !defined(DISABLE_ATAPI) */ #define scic_remote_device_is_atapi(device_handle) false -#endif /* !defined(DISABLE_ATAPI) */ - - /** * enum scic_sds_remote_device_states - This enumeration depicts all the states @@ -405,16 +382,6 @@ enum scic_sds_stp_remote_device_ready_substates { */ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR, -#if !defined(DISABLE_ATAPI) - /** - * This is the ATAPI error state for the STP ATAPI remote device. This state is - * entered when ATAPI device sends error status FIS without data while the device - * object is in CMD state. A suspension event is expected in this state. The device - * object will resume right away. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR, -#endif - /** * This is the READY substate indicates the device is waiting for the RESET task * coming to be recovered from certain hardware specific error. @@ -727,12 +694,7 @@ void scic_sds_remote_device_post_request( struct scic_sds_remote_device *sci_dev, u32 request); -#if !defined(DISABLE_ATAPI) -bool scic_sds_remote_device_is_atapi( - struct scic_sds_remote_device *sci_dev); -#else /* !defined(DISABLE_ATAPI) */ #define scic_sds_remote_device_is_atapi(sci_dev) false -#endif /* !defined(DISABLE_ATAPI) */ void scic_sds_remote_device_start_request( struct scic_sds_remote_device *sci_dev, diff --git a/drivers/scsi/isci/stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c index b81f21f..0fbfe52 100644 --- a/drivers/scsi/isci/stp_remote_device.c +++ b/drivers/scsi/isci/stp_remote_device.c @@ -483,47 +483,6 @@ static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_com return status; } -#if !defined(DISABLE_ATAPI) -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY ATAPI ERROR SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @[in]: device The device received event. - * @[in]: event_code The event code. - * - * This method will handle the event for a ATAPI device that is in the ATAPI - * ERROR state. We pick up suspension events to handle specifically to this - * state. We resume the RNC right away. We then complete the outstanding IO to - * this device. enum sci_status - */ -enum sci_status scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - enum sci_status status; - - status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); - - if (status == SCI_SUCCESS) { - if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX - || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { - status = scic_sds_remote_node_context_resume( - sci_dev->rnc, - sci_dev->working_request->state_handlers->parent.complete_handler, - (void *)sci_dev->working_request - ); - } - } - - return status; -} -#endif /* !defined(DISABLE_ATAPI) */ - -/* --------------------------------------------------------------------------- */ - static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = { [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .start_handler = scic_sds_remote_device_default_start_handler, @@ -593,25 +552,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_dev .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, -#if !defined(DISABLE_ATAPI) - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_stp_remote_device_complete_request, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_stp_remote_device_ready_atapi_error_substate_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, -#endif [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, @@ -764,35 +704,6 @@ static void scic_sds_stp_remote_device_ready_await_reset_substate_enter( ); } -#if !defined(DISABLE_ATAPI) -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY ATAPI ERROR SUBSTATE - * ***************************************************************************** */ - -/** - * The enter routine to READY ATAPI ERROR substate. - * @device: This is the SCI base object which is cast into a - * struct scic_sds_remote_device object. - * - */ -void scic_sds_stp_remote_device_ready_atapi_error_substate_enter( - struct sci_base_object *device) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)device; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR - ); -} -#endif /* !defined(DISABLE_ATAPI) */ - -/* --------------------------------------------------------------------------- */ - const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[] = { [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, @@ -806,11 +717,6 @@ const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[] = [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, }, -#if !defined(DISABLE_ATAPI) - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR] = { - .enter_state = scic_sds_stp_remote_device_ready_atapi_error_substate_enter, - }, -#endif [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter, }, -- cgit v0.10.2 From d37ee7e89a98a583d45fbc8bdd1943cbaf642fd0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 26 Apr 2011 13:19:53 -0700 Subject: isci: allow fallback to option-rom if efi variable retrieval fails If the scu efi driver is disabled but the option-rom is enabled (during an efi boot) allow the code to fallback to scanning legacy option-rom space for the parameters. Reported-by: Yinghai Lu Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index f7ca9e8..10b60ab 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -475,7 +475,7 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic int err, i; struct isci_host *isci_host; const struct firmware *fw = NULL; - struct isci_orom *orom; + struct isci_orom *orom = NULL; char *source = "(platform)"; check_si_rev(pdev); @@ -487,7 +487,8 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic if (efi_enabled) orom = isci_get_efi_var(pdev); - else + + if (!orom) orom = isci_request_oprom(pdev); for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) { -- cgit v0.10.2 From d2d61433a85f814c7bc0b20993bb39e97f2dde76 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 21 Apr 2011 05:36:23 +0000 Subject: isci: Remove excessive log noise with expander hot-unplug We are logging excessive output when hot unplug from expander. Moving that to debug. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c6f1ffd..c0ed1b2 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -183,13 +183,14 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) if (device_status != isci_ready_for_io) { /* Forces a retry from scsi mid layer. */ - dev_warn(&ihost->pdev->dev, - "%s: task %p: isci_host->status = %d, " - "device = %p; device_status = 0x%x\n\n", - __func__, - task, - isci_host_get_state(ihost), - device, device_status); + dev_dbg(&ihost->pdev->dev, + "%s: task %p: isci_host->status = %d, " + "device = %p; device_status = 0x%x\n\n", + __func__, + task, + isci_host_get_state(ihost), + device, + device_status); if (device_status == isci_ready) { /* Indicate QUEUE_FULL so that the scsi midlayer -- cgit v0.10.2 From e76d80579c2b5b4ecac107b83c22ceeb9e23bd1b Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Wed, 27 Apr 2011 17:50:50 +0000 Subject: isci: Implement SCU AFE recipe 10. Updated SCU AFE initialization values accordingly to the recipe 10. Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index c684d9e..5e8dea5 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -442,11 +442,20 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); + if (is_b0()) { + /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement + * Timer, PM Stagger Timer */ + writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + } + /* Configure bias currents to normal */ if (is_a0()) writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); - else + else if (is_a2()) writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); + else if (is_b0()) + writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); @@ -464,7 +473,7 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); - if (is_b0()) { + if (is_a0() || is_a2()) { /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); -- cgit v0.10.2 From 9a0fff7bf0ffd4f57fc71d8075a92008b606eb61 Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Thu, 28 Apr 2011 22:06:01 +0000 Subject: isci: Removed struct sci_base_object from state machine. Changed any occurrence of struct sci_base_object into void. Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_state.h b/drivers/scsi/isci/core/sci_base_state.h index 4272a6f..62d2a7c 100644 --- a/drivers/scsi/isci/core/sci_base_state.h +++ b/drivers/scsi/isci/core/sci_base_state.h @@ -58,13 +58,9 @@ #include "sci_object.h" -typedef void (*sci_base_state_handler_t)( - void - ); +typedef void (*sci_base_state_handler_t)(void); -typedef void (*sci_state_transition_t)( - struct sci_base_object *base_object - ); +typedef void (*sci_state_transition_t)(void *base_object); /** * struct sci_base_state - The base state object abstracts the fields common to diff --git a/drivers/scsi/isci/core/sci_base_state_machine.c b/drivers/scsi/isci/core/sci_base_state_machine.c index bc416d5..a704709 100644 --- a/drivers/scsi/isci/core/sci_base_state_machine.c +++ b/drivers/scsi/isci/core/sci_base_state_machine.c @@ -100,7 +100,7 @@ static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) * */ void sci_base_state_machine_construct(struct sci_base_state_machine *sm, - struct sci_base_object *owner, + void *owner, const struct sci_base_state *state_table, u32 initial_state) { diff --git a/drivers/scsi/isci/core/sci_base_state_machine.h b/drivers/scsi/isci/core/sci_base_state_machine.h index 13f6ee8..c0cf33b 100644 --- a/drivers/scsi/isci/core/sci_base_state_machine.h +++ b/drivers/scsi/isci/core/sci_base_state_machine.h @@ -94,7 +94,7 @@ struct sci_base_state_machine { * associated. It serves as a cookie to be provided to the state * enter/exit methods. */ - struct sci_base_object *state_machine_owner; + void *state_machine_owner; /** * This field simply indicates the state value for the state machine's @@ -121,7 +121,7 @@ struct sci_base_state_machine { void sci_base_state_machine_construct( struct sci_base_state_machine *this_state_machine, - struct sci_base_object *state_machine_owner, + void *state_machine_owner, const struct sci_base_state *state_table, u32 initial_state); diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 5e8dea5..135aa3e 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -2882,7 +2882,7 @@ enum sci_status scic_controller_start(struct scic_sds_controller *scic, /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * @object: This is the object which is cast to a struct scic_sds_controller * object. * * This method implements the actions taken by the struct scic_sds_controller on entry @@ -2890,8 +2890,7 @@ enum sci_status scic_controller_start(struct scic_sds_controller *scic, * controllers initial state. none This function should initialze the * controller object. */ -static void scic_sds_controller_initial_state_enter( - struct sci_base_object *object) +static void scic_sds_controller_initial_state_enter(void *object) { struct scic_sds_controller *scic; @@ -2903,15 +2902,14 @@ static void scic_sds_controller_initial_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * @object: This is the object which is cast to a struct scic_sds_controller * object. * * This method implements the actions taken by the struct scic_sds_controller on exit * from the SCI_BASE_CONTROLLER_STATE_STARTING. - This function stops the * controller starting timeout timer. none */ -static inline void scic_sds_controller_starting_state_exit( - struct sci_base_object *object) +static inline void scic_sds_controller_starting_state_exit(void *object) { struct scic_sds_controller *scic = (struct scic_sds_controller *)object; @@ -2920,15 +2918,14 @@ static inline void scic_sds_controller_starting_state_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * @object: This is the object which is cast to a struct scic_sds_controller * object. * * This method implements the actions taken by the struct scic_sds_controller on entry * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the * controllers ready state. none */ -static void scic_sds_controller_ready_state_enter( - struct sci_base_object *object) +static void scic_sds_controller_ready_state_enter(void *object) { struct scic_sds_controller *scic; @@ -2941,14 +2938,13 @@ static void scic_sds_controller_ready_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * @object: This is the object which is cast to a struct scic_sds_controller * object. * * This method implements the actions taken by the struct scic_sds_controller on exit * from the SCI_BASE_CONTROLLER_STATE_READY. - This function does nothing. none */ -static void scic_sds_controller_ready_state_exit( - struct sci_base_object *object) +static void scic_sds_controller_ready_state_exit(void *object) { struct scic_sds_controller *scic; @@ -2960,7 +2956,7 @@ static void scic_sds_controller_ready_state_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_controller + * @object: This is the object which is cast to a struct scic_sds_controller * object. * * This method implements the actions taken by the struct scic_sds_controller on entry @@ -2968,8 +2964,7 @@ static void scic_sds_controller_ready_state_exit( * controllers ready state. - Stop the phys on this controller - Stop the ports * on this controller - Stop all of the remote devices on this controller none */ -static void scic_sds_controller_stopping_state_enter( - struct sci_base_object *object) +static void scic_sds_controller_stopping_state_enter(void *object) { struct scic_sds_controller *scic; @@ -2983,15 +2978,14 @@ static void scic_sds_controller_stopping_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct + * @object: This is the object which is cast to a struct * scic_sds_controller object. * * This funciton implements the actions taken by the struct scic_sds_controller * on exit from the SCI_BASE_CONTROLLER_STATE_STOPPING. - * This function stops the controller stopping timeout timer. */ -static inline void scic_sds_controller_stopping_state_exit( - struct sci_base_object *object) +static inline void scic_sds_controller_stopping_state_exit(void *object) { struct scic_sds_controller *scic = (struct scic_sds_controller *)object; @@ -2999,7 +2993,7 @@ static inline void scic_sds_controller_stopping_state_exit( isci_timer_stop(scic->timeout_timer); } -static void scic_sds_controller_resetting_state_enter(struct sci_base_object *object) +static void scic_sds_controller_resetting_state_enter(void *object) { struct scic_sds_controller *scic; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 0901846..972b977 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -1556,14 +1556,14 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_ha /** * scic_sds_phy_starting_initial_substate_enter - - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state * handlers are put in place for the struct scic_sds_phy object. - The state is * changed to the wait phy type event notification. none */ -static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_object *object) +static void scic_sds_phy_starting_initial_substate_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -1579,14 +1579,13 @@ static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_object /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ -static void scic_sds_phy_starting_await_ossp_en_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -1599,14 +1598,14 @@ static void scic_sds_phy_starting_await_ossp_en_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_phy *sci_phy; @@ -1619,14 +1618,13 @@ static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the * struct scic_sds_phy object state handlers for this state. none */ -static void scic_sds_phy_starting_await_iaf_uf_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -1639,15 +1637,14 @@ static void scic_sds_phy_starting_await_iaf_uf_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the * struct scic_sds_phy object state handlers for this state. - Add this phy object to * the power control queue none */ -static void scic_sds_phy_starting_await_sas_power_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -1665,14 +1662,13 @@ static void scic_sds_phy_starting_await_sas_power_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the * struct scic_sds_phy object from the power control queue. none */ -static void scic_sds_phy_starting_await_sas_power_substate_exit( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) { struct scic_sds_phy *sci_phy; @@ -1685,15 +1681,14 @@ static void scic_sds_phy_starting_await_sas_power_substate_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the * struct scic_sds_phy object state handlers for this state. - Add this phy object to * the power control queue none */ -static void scic_sds_phy_starting_await_sata_power_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -1711,14 +1706,13 @@ static void scic_sds_phy_starting_await_sata_power_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on exiting * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the * struct scic_sds_phy object from the power control queue. none */ -static void scic_sds_phy_starting_await_sata_power_substate_exit( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) { struct scic_sds_phy *sci_phy; @@ -1732,15 +1726,13 @@ static void scic_sds_phy_starting_await_sata_power_substate_exit( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ -static void scic_sds_phy_starting_await_sata_phy_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) { struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; @@ -1754,8 +1746,7 @@ static void scic_sds_phy_starting_await_sata_phy_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy * on exiting @@ -1763,7 +1754,7 @@ static void scic_sds_phy_starting_await_sata_phy_substate_enter( * that was started on entry to await sata phy event notification none */ static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( - struct sci_base_object *object) + void *object) { struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; @@ -1772,14 +1763,13 @@ static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the * struct scic_sds_phy object state handlers for this state. none */ -static void scic_sds_phy_starting_await_sata_speed_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) { struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; @@ -1793,8 +1783,7 @@ static void scic_sds_phy_starting_await_sata_speed_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the * struct scic_sds_phy on exiting @@ -1802,7 +1791,7 @@ static void scic_sds_phy_starting_await_sata_speed_substate_enter( * that was started on entry to await sata phy event notification none */ static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( - struct sci_base_object *object) + void *object) { struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; @@ -1811,8 +1800,7 @@ static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the @@ -1820,8 +1808,7 @@ static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( * - Start the SIGNATURE FIS * timeout timer none */ -static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) { bool continue_to_ready_state; struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; @@ -1851,8 +1838,7 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the * struct scic_sds_phy on exiting @@ -1860,7 +1846,7 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter( * FIS timeout timer. none */ static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( - struct sci_base_object *object) + void *object) { struct scic_sds_phy *sci_phy; @@ -1871,14 +1857,14 @@ static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy * object state handlers for this state. - Change base state machine to the * ready state. none */ -static void scic_sds_phy_starting_final_substate_enter(struct sci_base_object *object) +static void scic_sds_phy_starting_final_substate_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -2206,14 +2192,13 @@ static void scu_link_layer_tx_hard_reset( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state * handlers for the phy object base state machine initial state. none */ -static void scic_sds_phy_initial_state_enter( - struct sci_base_object *object) +static void scic_sds_phy_initial_state_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -2224,15 +2209,14 @@ static void scic_sds_phy_initial_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This function will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state * handlers for the phy object base state machine initial state. - The SCU * hardware is requested to stop the protocol engine. none */ -static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) +static void scic_sds_phy_stopped_state_enter(void *object) { struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); @@ -2266,7 +2250,7 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state @@ -2276,8 +2260,7 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_object *object) * state then the struct scic_sds_controller is informed that the phy has gone link * down. none */ -static void scic_sds_phy_starting_state_enter( - struct sci_base_object *object) +static void scic_sds_phy_starting_state_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -2307,7 +2290,7 @@ static void scic_sds_phy_starting_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state @@ -2315,8 +2298,7 @@ static void scic_sds_phy_starting_state_enter( * hardware protocol engine is resumed. - The struct scic_sds_controller is informed * that the phy object has gone link up. none */ -static void scic_sds_phy_ready_state_enter( - struct sci_base_object *object) +static void scic_sds_phy_ready_state_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -2333,14 +2315,13 @@ static void scic_sds_phy_ready_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on exiting * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware * protocol engine represented by this struct scic_sds_phy object. none */ -static void scic_sds_phy_ready_state_exit( - struct sci_base_object *object) +static void scic_sds_phy_ready_state_exit(void *object) { struct scic_sds_phy *sci_phy; @@ -2351,14 +2332,13 @@ static void scic_sds_phy_ready_state_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state * handlers for the phy object base state machine resetting state. none */ -static void scic_sds_phy_resetting_state_enter( - struct sci_base_object *object) +static void scic_sds_phy_resetting_state_enter(void *object) { struct scic_sds_phy *sci_phy; @@ -2387,14 +2367,13 @@ static void scic_sds_phy_resetting_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_phy object. + * @object: This is the object which is cast to a struct scic_sds_phy object. * * This method will perform the actions required by the struct scic_sds_phy on * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state * handlers for the phy object base state machine final state. none */ -static void scic_sds_phy_final_state_enter( - struct sci_base_object *object) +static void scic_sds_phy_final_state_enter(void *object) { struct scic_sds_phy *sci_phy; diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 057f95a..1cbf1d6b 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -1623,15 +1623,14 @@ scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * entering the SCIC_SDS_PORT_READY_SUBSTATE_WAITING. This function checks the * port for any ready phys. If there is at least one phy in a ready state then * the port transitions to the ready operational substate. none */ -static void scic_sds_port_ready_substate_waiting_enter( - struct sci_base_object *object) +static void scic_sds_port_ready_substate_waiting_enter(void *object) { struct scic_sds_port *sci_port = (struct scic_sds_port *)object; @@ -1654,16 +1653,14 @@ static void scic_sds_port_ready_substate_waiting_enter( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This function will perform the actions required by the struct scic_sds_port * on entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets * the state handlers for the port object, notifies the SCI User that the port * is ready, and resumes port operations. none */ -static void scic_sds_port_ready_substate_operational_enter( - struct sci_base_object *object) +static void scic_sds_port_ready_substate_operational_enter(void *object) { u32 index; struct scic_sds_port *sci_port = (struct scic_sds_port *)object; @@ -1699,14 +1696,13 @@ static void scic_sds_port_ready_substate_operational_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports * the port not ready and suspends the port task scheduler. none */ -static void scic_sds_port_ready_substate_operational_exit( - struct sci_base_object *object) +static void scic_sds_port_ready_substate_operational_exit(void *object) { struct scic_sds_port *sci_port = (struct scic_sds_port *)object; struct scic_sds_controller *scic = @@ -1731,15 +1727,13 @@ static void scic_sds_port_ready_substate_operational_exit( /** * scic_sds_port_ready_substate_configuring_enter() - - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports * the port not ready and suspends the port task scheduler. none */ -static void scic_sds_port_ready_substate_configuring_enter( - struct sci_base_object *object) +static void scic_sds_port_ready_substate_configuring_enter(void *object) { struct scic_sds_port *sci_port = (struct scic_sds_port *)object; struct scic_sds_controller *scic = @@ -1763,8 +1757,7 @@ static void scic_sds_port_ready_substate_configuring_enter( SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); } -static void scic_sds_port_ready_substate_configuring_exit( - struct sci_base_object *object) +static void scic_sds_port_ready_substate_configuring_exit(void *object) { struct scic_sds_port *sci_port = (struct scic_sds_port *)object; @@ -2253,15 +2246,14 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * entering the SCI_BASE_PORT_STATE_STOPPED. This function sets the stopped * state handlers for the struct scic_sds_port object and disables the port task * scheduler in the hardware. none */ -static void scic_sds_port_stopped_state_enter( - struct sci_base_object *object) +static void scic_sds_port_stopped_state_enter(void *object) { struct scic_sds_port *sci_port; @@ -2285,14 +2277,13 @@ static void scic_sds_port_stopped_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * exiting the SCI_BASE_STATE_STOPPED. This function enables the SCU hardware * port task scheduler. none */ -static void scic_sds_port_stopped_state_exit( - struct sci_base_object *object) +static void scic_sds_port_stopped_state_exit(void *object) { struct scic_sds_port *sci_port; @@ -2304,14 +2295,14 @@ static void scic_sds_port_stopped_state_exit( /** * scic_sds_port_ready_state_enter - - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state * handlers for the struct scic_sds_port object, reports the port object as * not ready and starts the ready substate machine. none */ -static void scic_sds_port_ready_state_enter(struct sci_base_object *object) +static void scic_sds_port_ready_state_enter(void *object) { struct scic_sds_controller *scic; struct scic_sds_port *sci_port; @@ -2340,7 +2331,7 @@ static void scic_sds_port_ready_state_enter(struct sci_base_object *object) sci_base_state_machine_start(&sci_port->ready_substate_machine); } -static void scic_sds_port_ready_state_exit(struct sci_base_object *object) +static void scic_sds_port_ready_state_exit(void *object) { struct scic_sds_port *sci_port; @@ -2351,14 +2342,13 @@ static void scic_sds_port_ready_state_exit(struct sci_base_object *object) /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * entering the SCI_BASE_PORT_STATE_RESETTING. This function sets the resetting * state handlers for the struct scic_sds_port object. none */ -static void scic_sds_port_resetting_state_enter( - struct sci_base_object *object) +static void scic_sds_port_resetting_state_enter(void *object) { struct scic_sds_port *sci_port; @@ -2371,15 +2361,13 @@ static void scic_sds_port_resetting_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This function will perform the actions required by the * struct scic_sds_port on * exiting the SCI_BASE_STATE_RESETTING. This function does nothing. none */ -static inline void scic_sds_port_resetting_state_exit( - struct sci_base_object *object) +static inline void scic_sds_port_resetting_state_exit(void *object) { struct scic_sds_port *sci_port = (struct scic_sds_port *)object; @@ -2388,14 +2376,14 @@ static inline void scic_sds_port_resetting_state_exit( /** * - * @object: This is the struct sci_base_object which is cast to a struct scic_sds_port object. + * @object: This is the void object which is cast to a + * struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping * state handlers for the struct scic_sds_port object. none */ -static void scic_sds_port_stopping_state_enter( - struct sci_base_object *object) +static void scic_sds_port_stopping_state_enter(void *object) { struct scic_sds_port *sci_port; @@ -2408,15 +2396,14 @@ static void scic_sds_port_stopping_state_enter( /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This function will perform the actions required by the * struct scic_sds_port on * exiting the SCI_BASE_STATE_STOPPING. This function does nothing. none */ static inline void -scic_sds_port_stopping_state_exit(struct sci_base_object *object) +scic_sds_port_stopping_state_exit(void *object) { struct scic_sds_port *sci_port = (struct scic_sds_port *)object; @@ -2427,15 +2414,14 @@ scic_sds_port_stopping_state_exit(struct sci_base_object *object) /** * - * @object: This is the struct sci_base_object which is cast to a - * struct scic_sds_port object. + * @object: This is the object which is cast to a struct scic_sds_port object. * * This function will perform the actions required by the * struct scic_sds_port on * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping * state handlers for the struct scic_sds_port object. none */ -static void scic_sds_port_failed_state_enter(struct sci_base_object *object) +static void scic_sds_port_failed_state_enter(void *object) { struct scic_sds_port *sci_port = (struct scic_sds_port *)object; struct isci_port *iport = sci_object_get_association(sci_port); diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 395080d..3ebfb7f 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1521,8 +1521,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han * base request is constructed. Entry into the initial state sets all handlers * for the io request object to their default handlers. none */ -static void scic_sds_request_initial_state_enter( - struct sci_base_object *object) +static void scic_sds_request_initial_state_enter(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1541,8 +1540,7 @@ static void scic_sds_request_initial_state_enter( * SCI_BASE_REQUEST_STATE_CONSTRUCTED state. The method sets the state handlers * for the the constructed state. none */ -static void scic_sds_request_constructed_state_enter( - struct sci_base_object *object) +static void scic_sds_request_constructed_state_enter(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1556,14 +1554,13 @@ static void scic_sds_request_constructed_state_enter( /** * scic_sds_request_started_state_enter() - * @object: This parameter specifies the base object for which the state - * transition is occuring. This is cast into a SCIC_SDS_IO_REQUEST object. + * transition is occurring. This is cast into a SCIC_SDS_IO_REQUEST object. * * This method implements the actions taken when entering the * SCI_BASE_REQUEST_STATE_STARTED state. If the io request object type is a * SCSI Task request we must enter the started substate machine. none */ -static void scic_sds_request_started_state_enter( - struct sci_base_object *object) +static void scic_sds_request_started_state_enter(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1583,15 +1580,14 @@ static void scic_sds_request_started_state_enter( /** * scic_sds_request_started_state_exit() - * @object: This parameter specifies the base object for which the state - * transition is occuring. This object is cast into a SCIC_SDS_IO_REQUEST + * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST * object. * * This method implements the actions taken when exiting the * SCI_BASE_REQUEST_STATE_STARTED state. For task requests the action will be * to stop the started substate machine. none */ -static void scic_sds_request_started_state_exit( - struct sci_base_object *object) +static void scic_sds_request_started_state_exit(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1602,7 +1598,7 @@ static void scic_sds_request_started_state_exit( /** * scic_sds_request_completed_state_enter() - * @object: This parameter specifies the base object for which the state - * transition is occuring. This object is cast into a SCIC_SDS_IO_REQUEST + * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST * object. * * This method implements the actions taken when entering the @@ -1611,8 +1607,7 @@ static void scic_sds_request_started_state_exit( * completion status and convert it to an enum sci_status to return in the * completion callback function. none */ -static void scic_sds_request_completed_state_enter( - struct sci_base_object *object) +static void scic_sds_request_completed_state_enter(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; struct scic_sds_controller *scic = @@ -1636,14 +1631,13 @@ static void scic_sds_request_completed_state_enter( /** * scic_sds_request_aborting_state_enter() - * @object: This parameter specifies the base object for which the state - * transition is occuring. This object is cast into a SCIC_SDS_IO_REQUEST + * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST * object. * * This method implements the actions taken when entering the * SCI_BASE_REQUEST_STATE_ABORTING state. none */ -static void scic_sds_request_aborting_state_enter( - struct sci_base_object *object) +static void scic_sds_request_aborting_state_enter(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1660,14 +1654,13 @@ static void scic_sds_request_aborting_state_enter( /** * scic_sds_request_final_state_enter() - * @object: This parameter specifies the base object for which the state - * transition is occuring. This is cast into a SCIC_SDS_IO_REQUEST object. + * transition is occurring. This is cast into a SCIC_SDS_IO_REQUEST object. * * This method implements the actions taken when entering the * SCI_BASE_REQUEST_STATE_FINAL state. The only action required is to put the * state handlers in place. none */ -static void scic_sds_request_final_state_enter( - struct sci_base_object *object) +static void scic_sds_request_final_state_enter(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index d4009e5..4299737 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -518,12 +518,12 @@ static const struct scic_sds_io_request_state_handler scic_sds_smp_request_start * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This * includes setting the IO request state handlers for this sub-state. * @object: This parameter specifies the request object for which the sub-state - * change is occuring. + * change is occurring. * * none. */ static void scic_sds_smp_request_started_await_response_substate_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -539,12 +539,12 @@ static void scic_sds_smp_request_started_await_response_substate_enter( * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION sub-state. * This includes setting the SMP request state handlers for this sub-state. * @object: This parameter specifies the request object for which the sub-state - * change is occuring. + * change is occurring. * * none. */ static void scic_sds_smp_request_started_await_tc_completion_substate_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index 0367668..a7297ab 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -195,12 +195,12 @@ static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_ * sub-state. This includes setting the IO request state handlers for this * sub-state. * @object: This parameter specifies the request object for which the sub-state - * change is occuring. + * change is occurring. * * none. */ static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -216,12 +216,12 @@ static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_e * SCIC_SDS_IO_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This * includes setting the IO request state handlers for this sub-state. * @object: This parameter specifies the request object for which the sub-state - * change is occuring. + * change is occurring. * * none. */ static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 59c5f1b..2c6b62e 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -564,7 +564,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start }; static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -579,8 +579,7 @@ static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( ); } -static void scic_sds_stp_request_started_non_data_await_d2h_enter( - struct sci_base_object *object) +static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1214,7 +1213,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start }; static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1228,8 +1227,7 @@ static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( sci_req->target_device, sci_req); } -static void scic_sds_stp_request_started_pio_await_frame_enter( - struct sci_base_object *object) +static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1241,7 +1239,7 @@ static void scic_sds_stp_request_started_pio_await_frame_enter( } static void scic_sds_stp_request_started_pio_data_in_await_data_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1253,7 +1251,7 @@ static void scic_sds_stp_request_started_pio_data_in_await_data_enter( } static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1485,7 +1483,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start }; static void scic_sds_stp_request_started_udma_await_tc_completion_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1504,7 +1502,7 @@ static void scic_sds_stp_request_started_udma_await_tc_completion_enter( * will UF the D2H register FIS to complete the IO. */ static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1732,7 +1730,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start }; static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; @@ -1748,7 +1746,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completio } static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; struct scu_task_context *task_context; @@ -1775,7 +1773,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet } static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_request *sci_req = (struct scic_sds_request *)object; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 6d5ab72..b23f9a5 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1099,8 +1099,7 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ } }; -static void scic_sds_remote_device_initial_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_device_initial_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; @@ -1202,8 +1201,7 @@ static void isci_remote_device_stop_complete(struct isci_host *ihost, isci_remote_device_deconstruct(ihost, idev); } -static void scic_sds_remote_device_stopped_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_device_stopped_state_enter(void *object) { struct scic_sds_remote_device *sci_dev; struct scic_sds_controller *scic; @@ -1229,7 +1227,7 @@ static void scic_sds_remote_device_stopped_state_enter( scic_sds_controller_remote_device_stopped(scic, sci_dev); } -static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object) +static void scic_sds_remote_device_starting_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); @@ -1244,7 +1242,7 @@ static void scic_sds_remote_device_starting_state_enter(struct sci_base_object * SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); } -static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object) +static void scic_sds_remote_device_ready_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); @@ -1264,8 +1262,7 @@ static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *obj isci_remote_device_ready(ihost, idev); } -static void scic_sds_remote_device_ready_state_exit( - struct sci_base_object *object) +static void scic_sds_remote_device_ready_state_exit(void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); @@ -1281,8 +1278,7 @@ static void scic_sds_remote_device_ready_state_exit( } } -static void scic_sds_remote_device_stopping_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_device_stopping_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; @@ -1293,8 +1289,7 @@ static void scic_sds_remote_device_stopping_state_enter( ); } -static void scic_sds_remote_device_failed_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_device_failed_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; @@ -1305,8 +1300,7 @@ static void scic_sds_remote_device_failed_state_enter( ); } -static void scic_sds_remote_device_resetting_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_device_resetting_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; @@ -1320,16 +1314,14 @@ static void scic_sds_remote_device_resetting_state_enter( &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); } -static void scic_sds_remote_device_resetting_state_exit( - struct sci_base_object *object) +static void scic_sds_remote_device_resetting_state_exit(void *object) { struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); } -static void scic_sds_remote_device_final_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_device_final_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 291df19..bc51ecf 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -970,8 +970,7 @@ static void scic_sds_remote_node_context_invalidate_context_buffer( * * */ -static void scic_sds_remote_node_context_initial_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_node_context_initial_state_enter(void *object) { struct scic_sds_remote_node_context *rnc; @@ -1001,8 +1000,7 @@ static void scic_sds_remote_node_context_initial_state_enter( * * */ -static void scic_sds_remote_node_context_posting_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_node_context_posting_state_enter(void *object) { struct scic_sds_remote_node_context *sci_rnc; @@ -1022,8 +1020,7 @@ static void scic_sds_remote_node_context_posting_state_enter( * * */ -static void scic_sds_remote_node_context_invalidating_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_node_context_invalidating_state_enter(void *object) { struct scic_sds_remote_node_context *rnc; @@ -1043,8 +1040,7 @@ static void scic_sds_remote_node_context_invalidating_state_enter( * * */ -static void scic_sds_remote_node_context_resuming_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_node_context_resuming_state_enter(void *object) { struct scic_sds_remote_node_context *rnc; struct scic_sds_remote_device *sci_dev; @@ -1079,8 +1075,7 @@ static void scic_sds_remote_node_context_resuming_state_enter( * * */ -static void scic_sds_remote_node_context_ready_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_node_context_ready_state_enter(void *object) { struct scic_sds_remote_node_context *rnc; @@ -1104,8 +1099,7 @@ static void scic_sds_remote_node_context_ready_state_enter( * * */ -static void scic_sds_remote_node_context_tx_suspended_state_enter( - struct sci_base_object *object) +static void scic_sds_remote_node_context_tx_suspended_state_enter(void *object) { struct scic_sds_remote_node_context *rnc; @@ -1126,7 +1120,7 @@ static void scic_sds_remote_node_context_tx_suspended_state_enter( * */ static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_remote_node_context *rnc; @@ -1147,7 +1141,7 @@ static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( * */ static void scic_sds_remote_node_context_await_suspension_state_enter( - struct sci_base_object *object) + void *object) { struct scic_sds_remote_node_context *rnc; diff --git a/drivers/scsi/isci/smp_remote_device.c b/drivers/scsi/isci/smp_remote_device.c index 718ddaf..a38dc90 100644 --- a/drivers/scsi/isci/smp_remote_device.c +++ b/drivers/scsi/isci/smp_remote_device.c @@ -237,14 +237,14 @@ static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_dev /** * - * @object: This is the struct sci_base_object which is cast into a + * @object: This is the object which is cast into a * struct scic_sds_remote_device. * * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE enter method. * This function sets the ready cmd substate handlers and reports the device as * ready. none */ -static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_object *object) +static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); @@ -261,15 +261,14 @@ static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base /** * - * @object: This is the struct sci_base_object which is cast into a + * @object: This is the object which is cast into a * struct scic_sds_remote_device. * * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD enter method. This * function sets the remote device objects ready cmd substate handlers, and * notify core user that the device is not ready. none */ -static void scic_sds_smp_remote_device_ready_cmd_substate_enter( - struct sci_base_object *object) +static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); @@ -289,12 +288,12 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter( /** * - * @object: This is the struct sci_base_object which is cast into a + * @object: This is the object which is cast into a * struct scic_sds_remote_device. * * This is the SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_CMD exit method. none */ -static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_object *object) +static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); diff --git a/drivers/scsi/isci/stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c index 0fbfe52..1e6f773 100644 --- a/drivers/scsi/isci/stp_remote_device.c +++ b/drivers/scsi/isci/stp_remote_device.c @@ -601,12 +601,11 @@ scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *use /** * - * @device: This is the SCI base object which is cast into a + * @device: This is the object which is cast into a * struct scic_sds_remote_device object. * */ -static void scic_sds_stp_remote_device_ready_idle_substate_enter( - struct sci_base_object *device) +static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *device) { struct scic_sds_remote_device *sci_dev; @@ -635,7 +634,7 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter( } } -static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_object *object) +static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); @@ -653,7 +652,7 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_ SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } -static void scic_sds_stp_remote_device_ready_ncq_substate_enter(struct sci_base_object *object) +static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); @@ -662,7 +661,8 @@ static void scic_sds_stp_remote_device_ready_ncq_substate_enter(struct sci_base_ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); } -static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_object *object) +static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( + void *object) { struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); @@ -686,12 +686,12 @@ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci /** * The enter routine to READY AWAIT RESET substate. - * @device: This is the SCI base object which is cast into a + * @device: This is the object which is cast into a * struct scic_sds_remote_device object. * */ static void scic_sds_stp_remote_device_ready_await_reset_substate_enter( - struct sci_base_object *device) + void *device) { struct scic_sds_remote_device *sci_dev; -- cgit v0.10.2 From d3757c3aeb75259e0b86a872e98841a2ea4cb5e8 Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Thu, 28 Apr 2011 22:06:06 +0000 Subject: isci: Removed sci_base_object from scic_sds_controller. The 'struct sci_base_object' was removed from the struct scic_sds_controller and was replaced by a pointer to struct isci_host. Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 135aa3e..d7c37dc 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -213,7 +213,7 @@ static void scic_sds_controller_power_control_timer_handler( static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) { - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; scic->power_control.timer = isci_timer_create(ihost, scic, scic_sds_controller_power_control_timer_handler); @@ -584,7 +584,7 @@ static void scic_sds_controller_transition_to_ready( struct scic_sds_controller *scic, enum sci_status status) { - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; if (scic->state_machine.current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) { @@ -602,7 +602,7 @@ static void scic_sds_controller_transition_to_ready( static void scic_sds_controller_timeout_handler(void *_scic) { struct scic_sds_controller *scic = _scic; - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct sci_base_state_machine *sm = &scic->state_machine; if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) @@ -770,7 +770,7 @@ static void scic_sds_controller_phy_startup_timeout_handler(void *_scic) static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) { - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; scic->phy_startup_timer = isci_timer_create(ihost, scic, @@ -1796,7 +1796,7 @@ void scic_sds_controller_release_frame( */ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) { - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; u16 index; /* Default to APC mode. */ @@ -2662,7 +2662,7 @@ enum sci_status scic_controller_initialize( } - ihost = sci_object_get_association(scic); + ihost = scic->ihost; sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); @@ -2854,7 +2854,7 @@ enum sci_status scic_controller_start(struct scic_sds_controller *scic, /* Assign all the task entries to scic physical function */ scic_sds_controller_assign_task_entries(scic); - /* Now initialze the completion queue */ + /* Now initialize the completion queue */ scic_sds_controller_initialize_completion_queue(scic); /* Initialize the unsolicited frame queue for use */ @@ -2887,14 +2887,12 @@ enum sci_status scic_controller_start(struct scic_sds_controller *scic, * * This method implements the actions taken by the struct scic_sds_controller on entry * to the SCI_BASE_CONTROLLER_STATE_INITIAL. - Set the state handlers to the - * controllers initial state. none This function should initialze the + * controllers initial state. none This function should initialize the * controller object. */ static void scic_sds_controller_initial_state_enter(void *object) { - struct scic_sds_controller *scic; - - scic = (struct scic_sds_controller *)object; + struct scic_sds_controller *scic = object; sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_RESET); @@ -2911,7 +2909,7 @@ static void scic_sds_controller_initial_state_enter(void *object) */ static inline void scic_sds_controller_starting_state_exit(void *object) { - struct scic_sds_controller *scic = (struct scic_sds_controller *)object; + struct scic_sds_controller *scic = object; isci_timer_stop(scic->timeout_timer); } @@ -2927,9 +2925,7 @@ static inline void scic_sds_controller_starting_state_exit(void *object) */ static void scic_sds_controller_ready_state_enter(void *object) { - struct scic_sds_controller *scic; - - scic = (struct scic_sds_controller *)object; + struct scic_sds_controller *scic = object; /* set the default interrupt coalescence number and timeout value. */ scic_controller_set_interrupt_coalescence( @@ -2946,9 +2942,7 @@ static void scic_sds_controller_ready_state_enter(void *object) */ static void scic_sds_controller_ready_state_exit(void *object) { - struct scic_sds_controller *scic; - - scic = (struct scic_sds_controller *)object; + struct scic_sds_controller *scic = object; /* disable interrupt coalescence. */ scic_controller_set_interrupt_coalescence(scic, 0, 0); @@ -2966,9 +2960,7 @@ static void scic_sds_controller_ready_state_exit(void *object) */ static void scic_sds_controller_stopping_state_enter(void *object) { - struct scic_sds_controller *scic; - - scic = (struct scic_sds_controller *)object; + struct scic_sds_controller *scic = object; /* Stop all of the components for this controller */ scic_sds_controller_stop_phys(scic); @@ -2981,23 +2973,21 @@ static void scic_sds_controller_stopping_state_enter(void *object) * @object: This is the object which is cast to a struct * scic_sds_controller object. * - * This funciton implements the actions taken by the struct scic_sds_controller + * This function implements the actions taken by the struct scic_sds_controller * on exit from the SCI_BASE_CONTROLLER_STATE_STOPPING. - * This function stops the controller stopping timeout timer. */ static inline void scic_sds_controller_stopping_state_exit(void *object) { - struct scic_sds_controller *scic = - (struct scic_sds_controller *)object; + struct scic_sds_controller *scic = object; isci_timer_stop(scic->timeout_timer); } static void scic_sds_controller_resetting_state_enter(void *object) { - struct scic_sds_controller *scic; + struct scic_sds_controller *scic = object; - scic = container_of(object, typeof(*scic), parent); scic_sds_controller_reset_hardware(scic); sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_RESET); @@ -3051,7 +3041,7 @@ enum sci_status scic_controller_construct(struct scic_sds_controller *scic, u8 i; sci_base_state_machine_construct(&scic->state_machine, - &scic->parent, scic_sds_controller_state_table, + scic, scic_sds_controller_state_table, SCI_BASE_CONTROLLER_STATE_INITIAL); sci_base_state_machine_start(&scic->state_machine); diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index ce81286..8e3240d 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -125,17 +125,17 @@ struct scic_power_control { }; +struct isci_host; /** * struct scic_sds_controller - * - * This structure represents the SCU contoller object. + * This structure represents the SCU controller object. */ struct scic_sds_controller { /** - * The field specifies that the parent object for the base controller - * is the base object itself. + * The field specifies that the peer object for the controller. */ - struct sci_base_object parent; + struct isci_host *ihost; /** * This field contains the information for the base controller state diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 972b977..3b53968 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -336,7 +336,7 @@ enum sci_status scic_sds_phy_initialize( struct scu_link_layer_registers __iomem *link_layer_registers) { struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; /* Create the SIGNATURE FIS Timeout timer for this phy */ sci_phy->sata_timeout_timer = @@ -1932,7 +1932,7 @@ scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) struct scic_sds_controller *scic; scic = scic_sds_phy_get_controller(sci_phy), - ihost = sci_object_get_association(scic); + ihost = scic->ihost; /* Create the SIGNATURE FIS Timeout timer for this phy */ sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, @@ -2220,7 +2220,7 @@ static void scic_sds_phy_stopped_state_enter(void *object) { struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; sci_phy = (struct scic_sds_phy *)object; diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 1cbf1d6b..857482b 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -657,7 +657,7 @@ static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, { struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct sci_sas_identify_address_frame_protocols protocols; - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; scic_sds_phy_get_attached_phy_protocols(sci_phy, &protocols); @@ -679,7 +679,7 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, { struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_port *iport = sci_object_get_association(sci_port); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_phy *iphy = sci_object_get_association(sci_phy); sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); @@ -1012,7 +1012,7 @@ void scic_sds_port_broadcast_change_received( struct scic_sds_phy *sci_phy) { struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; /* notify the user. */ isci_port_bc_change_received(ihost, sci_port, sci_phy); @@ -1666,7 +1666,7 @@ static void scic_sds_port_ready_substate_operational_enter(void *object) struct scic_sds_port *sci_port = (struct scic_sds_port *)object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_port *iport = sci_object_get_association(sci_port); scic_sds_port_set_ready_state_handlers( @@ -1707,7 +1707,7 @@ static void scic_sds_port_ready_substate_operational_exit(void *object) struct scic_sds_port *sci_port = (struct scic_sds_port *)object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_port *iport = sci_object_get_association(sci_port); /* @@ -1738,7 +1738,7 @@ static void scic_sds_port_ready_substate_configuring_enter(void *object) struct scic_sds_port *sci_port = (struct scic_sds_port *)object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_port *iport = sci_object_get_association(sci_port); scic_sds_port_set_ready_state_handlers( @@ -1825,7 +1825,7 @@ static enum sci_status scic_sds_port_stopped_state_start_handler(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; enum sci_status status = SCI_SUCCESS; u32 phy_mask; @@ -2312,7 +2312,7 @@ static void scic_sds_port_ready_state_enter(void *object) sci_port = container_of(object, typeof(*sci_port), parent); scic = scic_sds_port_get_controller(sci_port); - ihost = sci_object_get_association(scic); + ihost = scic->ihost; iport = sci_object_get_association(sci_port); /* Put the ready state handlers in place though they will not be there long */ diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index a7e3833..df257ff 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -821,7 +821,7 @@ enum sci_status scic_sds_port_configuration_agent_initialize( { enum sci_status status = SCI_SUCCESS; enum scic_port_configuration_mode mode; - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; mode = scic->oem_parameters.sds1.controller.mode_type; diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 3ebfb7f..a438ea2 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1612,7 +1612,7 @@ static void scic_sds_request_completed_state_enter(void *object) struct scic_sds_request *sci_req = (struct scic_sds_request *)object; struct scic_sds_controller *scic = scic_sds_request_get_controller(sci_req); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_request *ireq = sci_object_get_association(sci_req); SET_STATE_HANDLER(sci_req, diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 676bcdb..55bfa3d 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -365,7 +365,7 @@ int isci_host_init(struct isci_host *isci_host) } isci_host->core_controller = controller; - sci_object_set_association(isci_host->core_controller, isci_host); + controller->ihost = isci_host; spin_lock_init(&isci_host->state_lock); spin_lock_init(&isci_host->scic_lock); spin_lock_init(&isci_host->queue_lock); diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 430b29e..c0916b1 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -68,6 +68,7 @@ #include "scic_port.h" #include "port.h" #include "request.h" +#include "core/scic_sds_controller.h" static void isci_port_change_state( struct isci_port *isci_port, @@ -472,7 +473,7 @@ void isci_port_invalid_link_up(struct scic_sds_controller *scic, struct scic_sds_port *sci_port, struct scic_sds_phy *phy) { - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); } @@ -481,7 +482,7 @@ void isci_port_stop_complete(struct scic_sds_controller *scic, struct scic_sds_port *sci_port, enum sci_status completion_status) { - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; dev_dbg(&ihost->pdev->dev, "Port stop complete\n"); } diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index b23f9a5..bb696cf 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1211,7 +1211,7 @@ static void scic_sds_remote_device_stopped_state_enter(void *object) sci_dev = container_of(object, typeof(*sci_dev), parent); scic = scic_sds_remote_device_get_controller(sci_dev); - ihost = sci_object_get_association(scic); + ihost = scic->ihost; idev = sci_object_get_association(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, @@ -1232,7 +1232,7 @@ static void scic_sds_remote_device_starting_state_enter(void *object) struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_object_get_association(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, @@ -1247,7 +1247,7 @@ static void scic_sds_remote_device_ready_state_enter(void *object) struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_object_get_association(sci_dev); SET_STATE_HANDLER(sci_dev, @@ -1270,7 +1270,7 @@ static void scic_sds_remote_device_ready_state_exit(void *object) sci_base_state_machine_stop(&sci_dev->ready_substate_machine); else { struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_object_get_association(sci_dev); isci_remote_device_not_ready(ihost, idev, diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index 8d57f95..6be9274 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -57,6 +57,7 @@ #define _SCI_ENVIRONMENT_H_ #include "isci.h" +#include "core/scic_sds_controller.h" struct scic_sds_controller; struct scic_sds_phy; @@ -65,7 +66,7 @@ struct scic_sds_remote_device; static inline struct device *scic_to_dev(struct scic_sds_controller *scic) { - struct isci_host *isci_host = sci_object_get_association(scic); + struct isci_host *isci_host = scic->ihost; return &isci_host->pdev->dev; } diff --git a/drivers/scsi/isci/smp_remote_device.c b/drivers/scsi/isci/smp_remote_device.c index a38dc90..aae5c80 100644 --- a/drivers/scsi/isci/smp_remote_device.c +++ b/drivers/scsi/isci/smp_remote_device.c @@ -249,7 +249,7 @@ static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_object_get_association(sci_dev); SET_STATE_HANDLER(sci_dev, @@ -273,7 +273,7 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_object_get_association(sci_dev); BUG_ON(sci_dev->working_request == NULL); diff --git a/drivers/scsi/isci/stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c index 1e6f773..c1c2f9b 100644 --- a/drivers/scsi/isci/stp_remote_device.c +++ b/drivers/scsi/isci/stp_remote_device.c @@ -582,7 +582,7 @@ scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *use struct scic_sds_remote_device *sci_dev = user_cookie; struct isci_remote_device *idev = sci_object_get_association(sci_dev); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; /* * For NCQ operation we do not issue a @@ -639,7 +639,7 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_object_get_association(sci_dev); BUG_ON(sci_dev->working_request == NULL); @@ -667,7 +667,7 @@ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), parent); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); + struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_object_get_association(sci_dev); SET_STATE_HANDLER(sci_dev, -- cgit v0.10.2 From e1e72a00dd9db0cd2b7d106916645626f53c0382 Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Thu, 28 Apr 2011 22:06:11 +0000 Subject: isci: Removed sci_base_object from scic_sds_phy. The 'struct sci_base_object' was removed from the struct scic_sds_phy and was replaced by a pointer to struct isci_phy. Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 3b53968..c935c04 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -1565,9 +1565,7 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_ha */ static void scic_sds_phy_starting_initial_substate_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); @@ -1587,9 +1585,7 @@ static void scic_sds_phy_starting_initial_substate_enter(void *object) */ static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN @@ -1607,9 +1603,7 @@ static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN @@ -1626,9 +1620,7 @@ static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( */ static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF @@ -1646,9 +1638,7 @@ static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) */ static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER @@ -1670,9 +1660,7 @@ static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) */ static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_controller_power_control_queue_remove( scic_sds_phy_get_controller(sci_phy), sci_phy @@ -1690,9 +1678,7 @@ static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) */ static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER @@ -1714,9 +1700,7 @@ static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) */ static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_controller_power_control_queue_remove( scic_sds_phy_get_controller(sci_phy), @@ -1734,7 +1718,7 @@ static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) */ static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) { - struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, @@ -1756,7 +1740,7 @@ static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( void *object) { - struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; isci_timer_stop(sci_phy->sata_timeout_timer); } @@ -1771,7 +1755,7 @@ static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( */ static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) { - struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, @@ -1793,7 +1777,7 @@ static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( void *object) { - struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; isci_timer_stop(sci_phy->sata_timeout_timer); } @@ -1811,7 +1795,7 @@ static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) { bool continue_to_ready_state; - struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers( sci_phy, @@ -1848,9 +1832,7 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; isci_timer_stop(sci_phy->sata_timeout_timer); } @@ -1866,9 +1848,7 @@ static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( */ static void scic_sds_phy_starting_final_substate_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = container_of(object, typeof(*sci_phy), parent); + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_starting_substate_handlers(sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); @@ -2200,9 +2180,7 @@ static void scu_link_layer_tx_hard_reset( */ static void scic_sds_phy_initial_state_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL); } @@ -2218,12 +2196,10 @@ static void scic_sds_phy_initial_state_enter(void *object) */ static void scic_sds_phy_stopped_state_enter(void *object) { - struct scic_sds_phy *sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); struct isci_host *ihost = scic->ihost; - sci_phy = (struct scic_sds_phy *)object; - /* * @todo We need to get to the controller to place this PE in a * reset state @@ -2262,9 +2238,7 @@ static void scic_sds_phy_stopped_state_enter(void *object) */ static void scic_sds_phy_starting_state_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING); @@ -2300,9 +2274,7 @@ static void scic_sds_phy_starting_state_enter(void *object) */ static void scic_sds_phy_ready_state_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY); @@ -2323,9 +2295,7 @@ static void scic_sds_phy_ready_state_enter(void *object) */ static void scic_sds_phy_ready_state_exit(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_suspend(sci_phy); } @@ -2340,9 +2310,7 @@ static void scic_sds_phy_ready_state_exit(void *object) */ static void scic_sds_phy_resetting_state_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING); @@ -2375,9 +2343,7 @@ static void scic_sds_phy_resetting_state_enter(void *object) */ static void scic_sds_phy_final_state_enter(void *object) { - struct scic_sds_phy *sci_phy; - - sci_phy = (struct scic_sds_phy *)object; + struct scic_sds_phy *sci_phy = object; scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL); @@ -2412,9 +2378,8 @@ void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, struct scic_sds_port *owning_port, u8 phy_index) { - sci_phy->parent.private = NULL; sci_base_state_machine_construct(&sci_phy->state_machine, - &sci_phy->parent, + sci_phy, scic_sds_phy_state_table, SCI_BASE_PHY_STATE_INITIAL); @@ -2434,7 +2399,7 @@ void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, /* Initialize the the substate machines */ sci_base_state_machine_construct(&sci_phy->starting_substate_machine, - &sci_phy->parent, + sci_phy, scic_sds_phy_starting_substates, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); } diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index fb99d47..fca95c1 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -217,6 +217,7 @@ enum scic_sds_phy_protocol { SCIC_SDS_MAX_PHY_PROTOCOLS }; +struct isci_phy; /** * struct scic_sds_phy - This structure contains or references all of the data * necessary to represent the core phy object and SCU harware protocol @@ -226,9 +227,9 @@ enum scic_sds_phy_protocol { */ struct scic_sds_phy { /** - * This field depicts the parent object (struct sci_base_object) for the phy. + * This field depicts the peer object for the phy. */ - struct sci_base_object parent; + struct isci_phy *iphy; /** * This field contains the information for the base phy state machine. diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 857482b..d6339c4 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -680,7 +680,7 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_port *iport = sci_object_get_association(sci_port); struct isci_host *ihost = scic->ihost; - struct isci_phy *iphy = sci_object_get_association(sci_phy); + struct isci_phy *iphy = sci_phy->iphy; sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 9e081a4..a690b6b 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -57,6 +57,7 @@ #include "phy.h" #include "scic_port.h" #include "scic_config_parameters.h" +#include "core/scic_sds_phy.h" struct scic_sds_phy; extern enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy); @@ -88,8 +89,8 @@ void isci_phy_init( status = scic_controller_get_phy_handle(scic, index, &scic_phy); if (status == SCI_SUCCESS) { - sci_object_set_association(scic_phy, (void *)phy); phy->sci_phy_handle = scic_phy; + scic_phy->iphy = phy; } else dev_err(&isci_host->pdev->dev, "failed scic_controller_get_phy_handle\n"); diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index c0916b1..d600b09 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -137,8 +137,7 @@ void isci_port_bc_change_received( struct scic_sds_port *port, struct scic_sds_phy *phy) { - struct isci_phy *isci_phy = - (struct isci_phy *)sci_object_get_association(phy); + struct isci_phy *isci_phy = phy->iphy; dev_dbg(&isci_host->pdev->dev, "%s: isci_phy = %p, sas_phy = %p\n", @@ -170,10 +169,9 @@ void isci_port_link_up( { unsigned long flags; struct scic_port_properties properties; - struct isci_phy *isci_phy - = (struct isci_phy *)sci_object_get_association(phy); struct isci_port *isci_port = (struct isci_port *)sci_object_get_association(port); + struct isci_phy *isci_phy = phy->iphy; enum sci_status call_status; unsigned long success = true; diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index 6be9274..744016d 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -73,7 +73,7 @@ static inline struct device *scic_to_dev(struct scic_sds_controller *scic) static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) { - struct isci_phy *iphy = sci_object_get_association(sci_phy); + struct isci_phy *iphy = sci_phy->iphy; if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) return NULL; -- cgit v0.10.2 From 115bd1f9e8ee11744818e6eb5351d05ab6a8402e Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Thu, 28 Apr 2011 22:06:16 +0000 Subject: isci: Removed sci_base_object from scic_sds_port. The 'struct sci_base_object' was removed from the struct scic_sds_port and was replaced by a pointer to struct isci_port. Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index d6339c4..3697211 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -678,7 +678,7 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, bool do_notify_user) { struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_port *iport = sci_object_get_association(sci_port); + struct isci_port *iport = sci_port->iport; struct isci_host *ihost = scic->ihost; struct isci_phy *iphy = sci_phy->iphy; @@ -1632,7 +1632,7 @@ scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) */ static void scic_sds_port_ready_substate_waiting_enter(void *object) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; scic_sds_port_set_ready_state_handlers( sci_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING @@ -1663,11 +1663,11 @@ static void scic_sds_port_ready_substate_waiting_enter(void *object) static void scic_sds_port_ready_substate_operational_enter(void *object) { u32 index; - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_host *ihost = scic->ihost; - struct isci_port *iport = sci_object_get_association(sci_port); + struct isci_port *iport = sci_port->iport; scic_sds_port_set_ready_state_handlers( sci_port, @@ -1704,11 +1704,11 @@ static void scic_sds_port_ready_substate_operational_enter(void *object) */ static void scic_sds_port_ready_substate_operational_exit(void *object) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_host *ihost = scic->ihost; - struct isci_port *iport = sci_object_get_association(sci_port); + struct isci_port *iport = sci_port->iport; /* * Kill the dummy task for this port if it has not yet posted @@ -1735,11 +1735,11 @@ static void scic_sds_port_ready_substate_operational_exit(void *object) */ static void scic_sds_port_ready_substate_configuring_enter(void *object) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_host *ihost = scic->ihost; - struct isci_port *iport = sci_object_get_association(sci_port); + struct isci_port *iport = sci_port->iport; scic_sds_port_set_ready_state_handlers( sci_port, @@ -1759,7 +1759,7 @@ static void scic_sds_port_ready_substate_configuring_enter(void *object) static void scic_sds_port_ready_substate_configuring_exit(void *object) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; scic_sds_port_suspend_port_task_scheduler(sci_port); } @@ -2255,9 +2255,7 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci */ static void scic_sds_port_stopped_state_enter(void *object) { - struct scic_sds_port *sci_port; - - sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; scic_sds_port_set_base_state_handlers( sci_port, SCI_BASE_PORT_STATE_STOPPED @@ -2285,9 +2283,7 @@ static void scic_sds_port_stopped_state_enter(void *object) */ static void scic_sds_port_stopped_state_exit(void *object) { - struct scic_sds_port *sci_port; - - sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; /* Enable and suspend the port task scheduler */ scic_sds_port_enable_port_task_scheduler(sci_port); @@ -2305,15 +2301,14 @@ static void scic_sds_port_stopped_state_exit(void *object) static void scic_sds_port_ready_state_enter(void *object) { struct scic_sds_controller *scic; - struct scic_sds_port *sci_port; + struct scic_sds_port *sci_port = object; struct isci_port *iport; struct isci_host *ihost; u32 prev_state; - sci_port = container_of(object, typeof(*sci_port), parent); scic = scic_sds_port_get_controller(sci_port); ihost = scic->ihost; - iport = sci_object_get_association(sci_port); + iport = sci_port->iport; /* Put the ready state handlers in place though they will not be there long */ scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY); @@ -2333,9 +2328,8 @@ static void scic_sds_port_ready_state_enter(void *object) static void scic_sds_port_ready_state_exit(void *object) { - struct scic_sds_port *sci_port; + struct scic_sds_port *sci_port = object; - sci_port = container_of(object, typeof(*sci_port), parent); sci_base_state_machine_stop(&sci_port->ready_substate_machine); scic_sds_port_invalidate_dummy_remote_node(sci_port); } @@ -2350,9 +2344,7 @@ static void scic_sds_port_ready_state_exit(void *object) */ static void scic_sds_port_resetting_state_enter(void *object) { - struct scic_sds_port *sci_port; - - sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; scic_sds_port_set_base_state_handlers( sci_port, SCI_BASE_PORT_STATE_RESETTING @@ -2369,7 +2361,7 @@ static void scic_sds_port_resetting_state_enter(void *object) */ static inline void scic_sds_port_resetting_state_exit(void *object) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; isci_timer_stop(sci_port->timer_handle); } @@ -2385,9 +2377,7 @@ static inline void scic_sds_port_resetting_state_exit(void *object) */ static void scic_sds_port_stopping_state_enter(void *object) { - struct scic_sds_port *sci_port; - - sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; scic_sds_port_set_base_state_handlers( sci_port, SCI_BASE_PORT_STATE_STOPPING @@ -2405,7 +2395,7 @@ static void scic_sds_port_stopping_state_enter(void *object) static inline void scic_sds_port_stopping_state_exit(void *object) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; + struct scic_sds_port *sci_port = object; isci_timer_stop(sci_port->timer_handle); @@ -2423,8 +2413,8 @@ scic_sds_port_stopping_state_exit(void *object) */ static void scic_sds_port_failed_state_enter(void *object) { - struct scic_sds_port *sci_port = (struct scic_sds_port *)object; - struct isci_port *iport = sci_object_get_association(sci_port); + struct scic_sds_port *sci_port = object; + struct isci_port *iport = sci_port->iport; scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_FAILED); @@ -2461,16 +2451,15 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, { u32 index; - sci_port->parent.private = NULL; sci_base_state_machine_construct(&sci_port->state_machine, - &sci_port->parent, + sci_port, scic_sds_port_state_table, SCI_BASE_PORT_STATE_STOPPED); sci_base_state_machine_start(&sci_port->state_machine); sci_base_state_machine_construct(&sci_port->ready_substate_machine, - &sci_port->parent, + sci_port, scic_sds_port_ready_substate_table, SCIC_SDS_PORT_READY_SUBSTATE_WAITING); diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 59c76cd..2253a2c 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -151,17 +151,17 @@ enum scic_sds_port_states { }; +struct isci_port; /** - * struct scic_sds_port - + * struct scic_sds_port * * The core port object provides the the abstraction for an SCU port. */ struct scic_sds_port { /** - * The field specifies that the parent object for the base controller - * is the base object itself. + * The field specifies the peer object for the port. */ - struct sci_base_object parent; + struct isci_port *iport; /** * This field contains the information for the base port state machine. diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index d600b09..30d6ad8 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -100,8 +100,8 @@ void isci_port_init( isci_port_change_state(isci_port, isci_freed); (void)scic_controller_get_port_handle(controller, index, &scic_port); - sci_object_set_association(scic_port, isci_port); isci_port->sci_port_handle = scic_port; + scic_port->iport = isci_port; } @@ -169,9 +169,8 @@ void isci_port_link_up( { unsigned long flags; struct scic_port_properties properties; - struct isci_port *isci_port - = (struct isci_port *)sci_object_get_association(port); struct isci_phy *isci_phy = phy->iphy; + struct isci_port *isci_port = port->iport; enum sci_status call_status; unsigned long success = true; diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index 744016d..3fb54dd 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -59,9 +59,6 @@ #include "isci.h" #include "core/scic_sds_controller.h" -struct scic_sds_controller; -struct scic_sds_phy; -struct scic_sds_port; struct scic_sds_remote_device; static inline struct device *scic_to_dev(struct scic_sds_controller *scic) @@ -83,7 +80,7 @@ static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) { - struct isci_port *iport = sci_object_get_association(sci_port); + struct isci_port *iport = sci_port->iport; if (!iport || !iport->isci_host) return NULL; -- cgit v0.10.2 From 5d937e966d383c4012c19b0e47dc196ba505eb19 Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Thu, 28 Apr 2011 22:06:21 +0000 Subject: isci: Removed sci_base_object from scic_sds_remote_device. The 'struct sci_base_object' was removed from the struct scic_sds_remote_device. Signed-off-by: Maciej Patelczyk [cleaned up sci_dev_to_idev] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index bb696cf..3fc66b2 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1101,9 +1101,8 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ static void scic_sds_remote_device_initial_state_enter(void *object) { - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = object; - sci_dev = container_of(object, typeof(*sci_dev), parent); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); @@ -1203,16 +1202,15 @@ static void isci_remote_device_stop_complete(struct isci_host *ihost, static void scic_sds_remote_device_stopped_state_enter(void *object) { - struct scic_sds_remote_device *sci_dev; + struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic; struct isci_remote_device *idev; struct isci_host *ihost; u32 prev_state; - sci_dev = container_of(object, typeof(*sci_dev), parent); scic = scic_sds_remote_device_get_controller(sci_dev); ihost = scic->ihost; - idev = sci_object_get_association(sci_dev); + idev = sci_dev_to_idev(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); @@ -1229,11 +1227,10 @@ static void scic_sds_remote_device_stopped_state_enter(void *object) static void scic_sds_remote_device_starting_state_enter(void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, SCI_BASE_REMOTE_DEVICE_STATE_STARTING); @@ -1244,11 +1241,10 @@ static void scic_sds_remote_device_starting_state_enter(void *object) static void scic_sds_remote_device_ready_state_enter(void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, @@ -1264,14 +1260,13 @@ static void scic_sds_remote_device_ready_state_enter(void *object) static void scic_sds_remote_device_ready_state_exit(void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; if (sci_dev->has_ready_substate_machine) sci_base_state_machine_stop(&sci_dev->ready_substate_machine); else { struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); @@ -1280,7 +1275,7 @@ static void scic_sds_remote_device_ready_state_exit(void *object) static void scic_sds_remote_device_stopping_state_enter(void *object) { - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER( sci_dev, @@ -1291,7 +1286,7 @@ static void scic_sds_remote_device_stopping_state_enter(void *object) static void scic_sds_remote_device_failed_state_enter(void *object) { - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER( sci_dev, @@ -1302,7 +1297,7 @@ static void scic_sds_remote_device_failed_state_enter(void *object) static void scic_sds_remote_device_resetting_state_enter(void *object) { - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER( sci_dev, @@ -1316,14 +1311,14 @@ static void scic_sds_remote_device_resetting_state_enter(void *object) static void scic_sds_remote_device_resetting_state_exit(void *object) { - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = object; scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); } static void scic_sds_remote_device_final_state_enter(void *object) { - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER( sci_dev, @@ -1377,11 +1372,10 @@ static void scic_remote_device_construct(struct scic_sds_port *sci_port, { sci_dev->owning_port = sci_port; sci_dev->started_request_count = 0; - sci_dev->parent.private = NULL; sci_base_state_machine_construct( &sci_dev->state_machine, - &sci_dev->parent, + sci_dev, scic_sds_remote_device_state_table, SCI_BASE_REMOTE_DEVICE_STATE_INITIAL ); @@ -1440,7 +1434,7 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci sci_base_state_machine_construct( &sci_dev->ready_substate_machine, - &sci_dev->parent, + sci_dev, scic_sds_stp_remote_device_ready_substate_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } else if (dev_is_expander(dev)) { @@ -1449,7 +1443,7 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci /* add the SMP ready substate machine construction here */ sci_base_state_machine_construct( &sci_dev->ready_substate_machine, - &sci_dev->parent, + sci_dev, scic_sds_smp_remote_device_ready_substate_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } else @@ -1497,7 +1491,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci /* add the SMP ready substate machine construction here */ sci_base_state_machine_construct( &sci_dev->ready_substate_machine, - &sci_dev->parent, + sci_dev, scic_sds_smp_remote_device_ready_substate_table, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { @@ -1505,7 +1499,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci sci_base_state_machine_construct( &sci_dev->ready_substate_machine, - &sci_dev->parent, + sci_dev, scic_sds_stp_remote_device_ready_substate_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } @@ -1565,9 +1559,6 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport, return status; } - /* XXX will be killed with sci_base_object removal */ - sci_object_set_association(&idev->sci, idev); - /* start the device. */ status = scic_remote_device_start(&idev->sci, ISCI_REMOTE_DEVICE_START_TIMEOUT); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 5cceb6c..62623c7 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -75,12 +75,6 @@ enum scic_remote_device_not_ready_reason_code { struct scic_sds_remote_device { /** - * The field specifies that the parent object for the base remote - * device is the base object itself. - */ - struct sci_base_object parent; - - /** * This field contains the information for the base remote device state * machine. */ @@ -417,11 +411,16 @@ static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_n return sci_dev; } -static inline struct domain_device *sci_dev_to_domain(struct scic_sds_remote_device *sci_dev) +static inline struct isci_remote_device *sci_dev_to_idev(struct scic_sds_remote_device *sci_dev) { struct isci_remote_device *idev = container_of(sci_dev, typeof(*idev), sci); - return idev->domain_dev; + return idev; +} + +static inline struct domain_device *sci_dev_to_domain(struct scic_sds_remote_device *sci_dev) +{ + return sci_dev_to_idev(sci_dev)->domain_dev; } static inline bool dev_is_expander(struct domain_device *dev) diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index 3fb54dd..41636c3 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -59,7 +59,6 @@ #include "isci.h" #include "core/scic_sds_controller.h" -struct scic_sds_remote_device; static inline struct device *scic_to_dev(struct scic_sds_controller *scic) { @@ -88,9 +87,11 @@ static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) return &iport->isci_host->pdev->dev; } -static inline struct device *scirdev_to_dev(struct scic_sds_remote_device *sci_dev) +static inline struct device *scirdev_to_dev( + struct scic_sds_remote_device *sci_dev) { - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = + container_of(sci_dev, typeof(*idev), sci); if (!idev || !idev->isci_port || !idev->isci_port->isci_host) return NULL; diff --git a/drivers/scsi/isci/smp_remote_device.c b/drivers/scsi/isci/smp_remote_device.c index aae5c80..45340a5 100644 --- a/drivers/scsi/isci/smp_remote_device.c +++ b/drivers/scsi/isci/smp_remote_device.c @@ -246,11 +246,10 @@ static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_dev */ static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_smp_remote_device_ready_substate_handler_table, @@ -270,11 +269,10 @@ static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) */ static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); BUG_ON(sci_dev->working_request == NULL); @@ -295,8 +293,7 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) */ static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; sci_dev->working_request = NULL; } diff --git a/drivers/scsi/isci/stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c index c1c2f9b..d869764 100644 --- a/drivers/scsi/isci/stp_remote_device.c +++ b/drivers/scsi/isci/stp_remote_device.c @@ -580,7 +580,7 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *user_cookie) { struct scic_sds_remote_device *sci_dev = user_cookie; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; @@ -607,9 +607,7 @@ scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *use */ static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *device) { - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)device; + struct scic_sds_remote_device *sci_dev = device; SET_STATE_HANDLER( sci_dev, @@ -636,11 +634,10 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *device) static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); BUG_ON(sci_dev->working_request == NULL); @@ -654,8 +651,7 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; SET_STATE_HANDLER(sci_dev, scic_sds_stp_remote_device_ready_substate_handler_table, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); @@ -664,11 +660,10 @@ static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object) static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( void *object) { - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); + struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_object_get_association(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_stp_remote_device_ready_substate_handler_table, -- cgit v0.10.2 From af23e85737253624cde84704008be40355ff6922 Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Thu, 28 Apr 2011 22:06:26 +0000 Subject: isci: Removed sci_base_object from scic_sds_remote_node_context. The 'struct sci_base_object' was removed from the struct scic_sds_remote_node_context. Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 3fc66b2..2bbc7c2 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1386,8 +1386,6 @@ static void scic_remote_device_construct(struct scic_sds_port *sci_port, scic_sds_remote_node_context_construct(&sci_dev->rnc, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); - - sci_object_set_association(&sci_dev->rnc, sci_dev); } /** diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index bc51ecf..49d2dc5 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -972,9 +972,7 @@ static void scic_sds_remote_node_context_invalidate_context_buffer( */ static void scic_sds_remote_node_context_initial_state_enter(void *object) { - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; + struct scic_sds_remote_node_context *rnc = object; SET_STATE_HANDLER( rnc, @@ -1002,9 +1000,7 @@ static void scic_sds_remote_node_context_initial_state_enter(void *object) */ static void scic_sds_remote_node_context_posting_state_enter(void *object) { - struct scic_sds_remote_node_context *sci_rnc; - - sci_rnc = (struct scic_sds_remote_node_context *)object; + struct scic_sds_remote_node_context *sci_rnc = object; SET_STATE_HANDLER( sci_rnc, @@ -1022,9 +1018,7 @@ static void scic_sds_remote_node_context_posting_state_enter(void *object) */ static void scic_sds_remote_node_context_invalidating_state_enter(void *object) { - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; + struct scic_sds_remote_node_context *rnc = object; SET_STATE_HANDLER( rnc, @@ -1042,11 +1036,10 @@ static void scic_sds_remote_node_context_invalidating_state_enter(void *object) */ static void scic_sds_remote_node_context_resuming_state_enter(void *object) { - struct scic_sds_remote_node_context *rnc; + struct scic_sds_remote_node_context *rnc = object; struct scic_sds_remote_device *sci_dev; struct domain_device *dev; - rnc = (struct scic_sds_remote_node_context *)object; sci_dev = rnc_to_dev(rnc); dev = sci_dev_to_domain(sci_dev); @@ -1077,9 +1070,7 @@ static void scic_sds_remote_node_context_resuming_state_enter(void *object) */ static void scic_sds_remote_node_context_ready_state_enter(void *object) { - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; + struct scic_sds_remote_node_context *rnc = object; SET_STATE_HANDLER( rnc, @@ -1101,9 +1092,7 @@ static void scic_sds_remote_node_context_ready_state_enter(void *object) */ static void scic_sds_remote_node_context_tx_suspended_state_enter(void *object) { - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; + struct scic_sds_remote_node_context *rnc = object; SET_STATE_HANDLER( rnc, @@ -1122,9 +1111,7 @@ static void scic_sds_remote_node_context_tx_suspended_state_enter(void *object) static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( void *object) { - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; + struct scic_sds_remote_node_context *rnc = object; SET_STATE_HANDLER( rnc, @@ -1143,9 +1130,7 @@ static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( static void scic_sds_remote_node_context_await_suspension_state_enter( void *object) { - struct scic_sds_remote_node_context *rnc; - - rnc = (struct scic_sds_remote_node_context *)object; + struct scic_sds_remote_node_context *rnc = object; SET_STATE_HANDLER( rnc, @@ -1193,7 +1178,7 @@ void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context sci_base_state_machine_construct( &rnc->state_machine, - &rnc->parent, + rnc, scic_sds_remote_node_context_state_table, SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE ); diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index b3f2546..bc7914b 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -226,11 +226,6 @@ enum scic_sds_remote_node_context_destination_state { * the silicon RNC. */ struct scic_sds_remote_node_context { - /* - * parent object - */ - struct sci_base_object parent; - /** * This field indicates the remote node index (RNI) associated with * this RNC. -- cgit v0.10.2 From 890cae9b8a7defd87feb1ec77a2affd25bd59cce Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Thu, 28 Apr 2011 22:06:31 +0000 Subject: isci: Removed sci_base_object from scic_sds_request. The 'struct sci_base_object' was removed from the struct scic_sds_request and was replaced by a pointer to struct isci_request. Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c index cb3e9f7..ebf0ed9 100644 --- a/drivers/scsi/isci/core/sci_util.c +++ b/drivers/scsi/isci/core/sci_util.c @@ -72,7 +72,7 @@ void scic_word_copy_with_swap( void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) { - struct isci_request *ireq = sci_object_get_association(sci_req); + struct isci_request *ireq = sci_req->ireq; dma_addr_t offset; BUG_ON(phys_addr < ireq->request_daddr); @@ -87,8 +87,7 @@ void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t ph dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sds_request, void *virt_addr) { - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sds_request); + struct isci_request *isci_request = sds_request->ireq; char *requested_addr = (char *)virt_addr; char *base_addr = (char *)isci_request; diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index a438ea2..fba6428 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -253,8 +253,7 @@ static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( */ void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) { - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sds_request); + struct isci_request *isci_request = sds_request->ireq; struct isci_host *isci_host = isci_request->isci_host; struct sas_task *task = isci_request_access_task(isci_request); struct scatterlist *sg = NULL; @@ -359,8 +358,7 @@ static void scic_sds_io_request_build_ssp_command_iu( struct sci_ssp_command_iu *command_frame; u32 cdb_length; u32 *cdb_buffer; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sds_request); + struct isci_request *isci_request = sds_request->ireq; command_frame = (struct sci_ssp_command_iu *)sds_request->command_buffer; @@ -403,8 +401,7 @@ static void scic_sds_task_request_build_ssp_task_iu( struct scic_sds_request *sds_request) { struct sci_ssp_task_iu *command_frame; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sds_request); + struct isci_request *isci_request = sds_request->ireq; command_frame = (struct sci_ssp_task_iu *)sds_request->command_buffer; @@ -700,8 +697,7 @@ u32 scic_io_request_get_object_size(void) enum sci_status scic_io_request_construct_basic_ssp( struct scic_sds_request *sci_req) { - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sci_req); + struct isci_request *isci_request = sci_req->ireq; sci_req->protocol = SCIC_SSP_PROTOCOL; @@ -744,8 +740,7 @@ enum sci_status scic_io_request_construct_basic_sata( u32 len; enum dma_data_direction dir; bool copy = false; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sci_req); + struct isci_request *isci_request = sci_req->ireq; struct sas_task *task = isci_request_access_task(isci_request); stp_req = container_of(sci_req, typeof(*stp_req), parent); @@ -772,8 +767,7 @@ enum sci_status scic_task_request_construct_sata( { enum sci_status status; u8 sat_protocol; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sci_req); + struct isci_request *isci_request = sci_req->ireq; sat_protocol = isci_sata_get_sat_protocol(isci_request); @@ -1002,8 +996,7 @@ void scic_sds_io_request_copy_response(struct scic_sds_request *sds_request) u32 user_response_length; u32 core_response_length; struct sci_ssp_response_iu *ssp_response; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(sds_request); + struct isci_request *isci_request = sds_request->ireq; ssp_response = (struct sci_ssp_response_iu *)sds_request->response_buffer; @@ -1523,7 +1516,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han */ static void scic_sds_request_initial_state_enter(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1542,7 +1535,7 @@ static void scic_sds_request_initial_state_enter(void *object) */ static void scic_sds_request_constructed_state_enter(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1562,7 +1555,7 @@ static void scic_sds_request_constructed_state_enter(void *object) */ static void scic_sds_request_started_state_enter(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1589,7 +1582,7 @@ static void scic_sds_request_started_state_enter(void *object) */ static void scic_sds_request_started_state_exit(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; if (sci_req->has_started_substate_machine == true) sci_base_state_machine_stop(&sci_req->started_substate_machine); @@ -1609,11 +1602,11 @@ static void scic_sds_request_started_state_exit(void *object) */ static void scic_sds_request_completed_state_enter(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; struct scic_sds_controller *scic = scic_sds_request_get_controller(sci_req); struct isci_host *ihost = scic->ihost; - struct isci_request *ireq = sci_object_get_association(sci_req); + struct isci_request *ireq = sci_req->ireq; SET_STATE_HANDLER(sci_req, scic_sds_request_state_handler_table, @@ -1639,7 +1632,7 @@ static void scic_sds_request_completed_state_enter(void *object) */ static void scic_sds_request_aborting_state_enter(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; /* Setting the abort bit in the Task Context is required by the silicon. */ sci_req->task_context_buffer->abort = 1; @@ -1662,7 +1655,7 @@ static void scic_sds_request_aborting_state_enter(void *object) */ static void scic_sds_request_final_state_enter(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1699,8 +1692,7 @@ static void scic_sds_general_request_construct(struct scic_sds_controller *scic, void *user_io_request_object, struct scic_sds_request *sci_req) { - sci_req->parent.private = NULL; - sci_base_state_machine_construct(&sci_req->state_machine, &sci_req->parent, + sci_base_state_machine_construct(&sci_req->state_machine, sci_req, scic_sds_request_state_table, SCI_BASE_REQUEST_STATE_INITIAL); sci_base_state_machine_start(&sci_req->state_machine); @@ -1790,7 +1782,7 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, /* Construct the started sub-state machine. */ sci_base_state_machine_construct( &sci_req->started_substate_machine, - &sci_req->parent, + sci_req, scic_sds_io_request_started_task_mgmt_substate_table, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION ); diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 0bb1da8..11d5a3e 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -118,6 +118,7 @@ enum scic_sds_smp_request_started_substates { SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, }; +struct isci_request; /** * struct scic_sds_request - This structure contains or references all of * the data necessary to process a task management or normal IO request. @@ -126,10 +127,9 @@ enum scic_sds_smp_request_started_substates { */ struct scic_sds_request { /** - * The field specifies that the parent object for the base request is the - * base object itself. + * The field specifies that the peer object for the request object. */ - struct sci_base_object parent; + struct isci_request *ireq; /** * This field contains the information for the base request state machine. diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 4299737..ba29192 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -525,7 +525,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_smp_request_start static void scic_sds_smp_request_started_await_response_substate_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -546,7 +546,7 @@ static void scic_sds_smp_request_started_await_response_substate_enter( static void scic_sds_smp_request_started_await_tc_completion_substate_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -590,7 +590,7 @@ enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) /* Construct the started sub-state machine. */ sci_base_state_machine_construct( &sci_req->started_substate_machine, - &sci_req->parent, + sci_req, scic_sds_smp_request_started_substate_table, SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE ); diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index a7297ab..7183ae3 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -202,7 +202,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_ static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -223,7 +223,7 @@ static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_e static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 2c6b62e..ec21546 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -566,7 +566,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -581,7 +581,7 @@ static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -611,7 +611,7 @@ enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); sci_base_state_machine_construct(&sci_req->started_substate_machine, - &sci_req->parent, + sci_req, scic_sds_stp_request_started_non_data_substate_table, SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE); @@ -1215,7 +1215,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1229,7 +1229,7 @@ static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1241,7 +1241,7 @@ static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) static void scic_sds_stp_request_started_pio_data_in_await_data_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1253,7 +1253,7 @@ static void scic_sds_stp_request_started_pio_data_in_await_data_enter( static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1311,7 +1311,7 @@ enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_ } sci_base_state_machine_construct(&sci_req->started_substate_machine, - &sci_req->parent, + sci_req, scic_sds_stp_request_started_pio_substate_table, SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE); @@ -1485,7 +1485,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start static void scic_sds_stp_request_started_udma_await_tc_completion_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1504,7 +1504,7 @@ static void scic_sds_stp_request_started_udma_await_tc_completion_enter( static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1535,7 +1535,7 @@ enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci sci_base_state_machine_construct( &sci_req->started_substate_machine, - &sci_req->parent, + sci_req, scic_sds_stp_request_started_udma_substate_table, SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE ); @@ -1732,7 +1732,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_stp_request_start static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1748,7 +1748,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completio static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; struct scu_task_context *task_context; struct sata_fis_reg_h2d *h2d_fis; enum sci_status status; @@ -1775,7 +1775,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( void *object) { - struct scic_sds_request *sci_req = (struct scic_sds_request *)object; + struct scic_sds_request *sci_req = object; SET_STATE_HANDLER( sci_req, @@ -1806,7 +1806,7 @@ enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_reques scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); sci_base_state_machine_construct(&sci_req->started_substate_machine, - &sci_req->parent, + sci_req, scic_sds_stp_request_started_soft_reset_substate_table, SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 281a556..c45e78e 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -61,7 +61,7 @@ #include "request.h" #include "sata.h" #include "scu_completion_codes.h" - +#include "core/scic_sds_request.h" static enum sci_status isci_request_ssp_request_construct( struct isci_request *request) @@ -225,7 +225,7 @@ static enum sci_status isci_io_request_build( return SCI_FAILURE; } - sci_object_set_association(request->sci_request_handle, request); + request->sci_request_handle->ireq = request; switch (task->task_proto) { case SAS_PROTOCOL_SMP: diff --git a/drivers/scsi/isci/stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c index d869764..1853552 100644 --- a/drivers/scsi/isci/stp_remote_device.c +++ b/drivers/scsi/isci/stp_remote_device.c @@ -209,8 +209,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_h struct scic_sds_request *request) { enum sci_status status; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(request); + struct isci_request *isci_request = request->ireq; /* Will the port allow the io request to start? */ @@ -280,8 +279,7 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_ha struct scic_sds_request *request) { enum sci_status status; - struct isci_request *isci_request = - (struct isci_request *)sci_object_get_association(request); + struct isci_request *isci_request = request->ireq; if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { status = sci_dev->owning_port->state_handlers->start_io_handler( diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c0ed1b2..95f3867 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -63,7 +63,7 @@ #include "request.h" #include "sata.h" #include "task.h" - +#include "core/scic_sds_request.h" /** * isci_task_refuse() - complete the request to the upper layer driver in * the case where an I/O needs to be completed back in the submit path. @@ -314,10 +314,7 @@ static enum sci_status isci_task_request_build( goto errout; } - sci_object_set_association( - request->sci_request_handle, - request - ); + request->sci_request_handle->ireq = request; /* XXX convert to get this from task->tproto like other drivers */ if (dev->dev_type == SAS_END_DEV) { -- cgit v0.10.2 From be2f41c611b65353fa3ae0c155cf906b348dc864 Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Thu, 28 Apr 2011 22:06:36 +0000 Subject: isci: Removed sci_object.h from project. The sci_object.h file was removed. No sci_base_object is now in the code. Reported-by: Christoph Hellwig Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_base_state.h b/drivers/scsi/isci/core/sci_base_state.h index 62d2a7c..d64efac 100644 --- a/drivers/scsi/isci/core/sci_base_state.h +++ b/drivers/scsi/isci/core/sci_base_state.h @@ -56,8 +56,6 @@ #ifndef _SCI_BASE_STATE_H_ #define _SCI_BASE_STATE_H_ -#include "sci_object.h" - typedef void (*sci_base_state_handler_t)(void); typedef void (*sci_state_transition_t)(void *base_object); diff --git a/drivers/scsi/isci/core/sci_object.h b/drivers/scsi/isci/core/sci_object.h deleted file mode 100644 index 801b01b..0000000 --- a/drivers/scsi/isci/core/sci_object.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_OBJECT_H_ -#define _SCI_OBJECT_H_ - -/** - * This file contains all of the method and constants associated with the SCI - * base object. The SCI base object is the class from which all other - * objects derive in the Storage Controller Interface. - * - * - */ - - -#include "sci_status.h" - -/** - * struct sci_base_object - all core objects must include this as their - * first member to permit the casting below - * - * TODO: unwind this assumption, convert these routines and callers to pass a struct - * sci_base_object pointer without casting, or convert 'private' to the - * expected type per-object - * - */ -struct sci_base_object { - void *private; -}; - -static inline void *sci_object_get_association(void *obj) -{ - struct sci_base_object *base = obj; - - return base->private; -} - -static inline void sci_object_set_association(void *obj, void *private) -{ - struct sci_base_object *base = obj; - - base->private = private; -} - -#endif /* _SCI_OBJECT_H_ */ - diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h index 1ac530d..1602263 100644 --- a/drivers/scsi/isci/core/scic_io_request.h +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -161,8 +161,7 @@ enum sci_status scic_io_request_construct( * if the remote_device does not support the SSP protocol. * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not * properly set the association between the SCIC IO request and the user's IO - * request. Please refer to the sci_object_set_association() routine for more - * information. + * request. */ enum sci_status scic_io_request_construct_basic_ssp( struct scic_sds_request *scic_io_request); @@ -184,8 +183,7 @@ enum sci_status scic_io_request_construct_basic_ssp( * if the remote_device does not support the STP protocol. * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not * properly set the association between the SCIC IO request and the user's IO - * request. Please refer to the sci_object_set_association() routine for more - * information. + * request. */ enum sci_status scic_io_request_construct_basic_sata( struct scic_sds_request *scic_io_request); @@ -206,8 +204,7 @@ enum sci_status scic_io_request_construct_basic_sata( * if the remote_device does not support the SMP protocol. * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not * properly set the association between the SCIC IO request and the user's IO - * request. Please refer to the sci_object_set_association() routine for more - * information. + * request. */ enum sci_status scic_io_request_construct_smp( struct scic_sds_request *scic_io_request); diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index ba29192..fff8668 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -574,8 +574,7 @@ static const struct sci_base_state scic_sds_smp_request_started_substate_table[] * if the remote_device does not support the SMP protocol. * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not * properly set the association between the SCIC IO request and the user's IO - * request. Please refer to the sci_object_set_association() routine for more - * information. + * request. */ enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) { diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index ac292d2..60c8462 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -65,7 +65,6 @@ #include #include -#include "core/sci_object.h" #include "scic_controller.h" #include "host.h" #include "timers.h" -- cgit v0.10.2 From ab2e8f7d07f577ee39228fb3454b9f29eab0f312 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 27 Apr 2011 16:32:45 -0700 Subject: isci: merge remote_device substates into a single state machine A substate is just a state, so uplevel the smp and stp device substates. Three tricks at work here: 1/ scic_sds_remote_device_ready_state_enter: needs to know the the device type so it can immediately transition to a stp or smp ready substate. 2/ scic_sds_remote_device_ready_state_exit: needs to know the device type. In the ssp case the device is no longer ready, in the stp, and smp case we have simply exited to a ready "substate". 3/ scic_sds_remote_device_resume_complete_handler: The one location where we directly check the current state against SCI_BASE_REMOTE_DEVICE_STATE_READY needed to comprehend the possible ready substates. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index fc50ba3..c27d259 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -7,8 +7,6 @@ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ remote_device.o port.o timers.o \ host.o task.o probe_roms.o \ - stp_remote_device.o \ - smp_remote_device.o \ remote_node_context.o \ remote_node_table.o \ core/scic_sds_controller.o \ diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 2bbc7c2..f6da85e 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "intel_sas.h" +#include "intel_ata.h" #include "isci.h" #include "port.h" #include "remote_device.h" @@ -71,6 +72,65 @@ #include "scu_event_codes.h" #include "task.h" +/** + * isci_remote_device_change_state() - This function gets the status of the + * remote_device object. + * @isci_device: This parameter points to the isci_remote_device object + * + * status of the object as a isci_status enum. + */ +void isci_remote_device_change_state( + struct isci_remote_device *isci_device, + enum isci_status status) +{ + unsigned long flags; + + spin_lock_irqsave(&isci_device->state_lock, flags); + isci_device->status = status; + spin_unlock_irqrestore(&isci_device->state_lock, flags); +} + +/** + * isci_remote_device_not_ready() - This function is called by the scic when + * the remote device is not ready. We mark the isci device as ready (not + * "ready_for_io") and signal the waiting proccess. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device + * + */ +static void isci_remote_device_not_ready(struct isci_host *ihost, + struct isci_remote_device *idev, u32 reason) +{ + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + + if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) + isci_remote_device_change_state(idev, isci_stopping); + else + /* device ready is actually a "not ready for io" state. */ + isci_remote_device_change_state(idev, isci_ready); +} + +/** + * isci_remote_device_ready() - This function is called by the scic when the + * remote device is ready. We mark the isci device as ready and signal the + * waiting proccess. + * @ihost: our valid isci_host + * @idev: remote device + * + */ +static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev) +{ + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", __func__, idev); + + isci_remote_device_change_state(idev, isci_ready_for_io); + if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) + wake_up(&ihost->eventq); +} + + + enum sci_status scic_remote_device_stop( struct scic_sds_remote_device *sci_dev, u32 timeout) @@ -228,49 +288,43 @@ void scic_sds_remote_device_post_request( ); } -/** - * - * @user_parameter: This is cast to a remote device object. - * - * This method is called once the remote node context is ready to be freed. +/* called once the remote node context is ready to be freed. * The remote device can now report that its stop operation is complete. none */ -static void scic_sds_cb_remote_device_rnc_destruct_complete( - void *user_parameter) +static void scic_sds_cb_remote_device_rnc_destruct_complete(void *_dev) { - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)user_parameter; + struct scic_sds_remote_device *sci_dev = _dev; BUG_ON(sci_dev->started_request_count != 0); - sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); } -/** - * - * @user_parameter: This is cast to a remote device object. - * - * This method is called once the remote node context has transisitioned to a +/* called once the remote node context has transisitioned to a * ready state. This is the indication that the remote device object can also - * transition to ready. none + * transition to ready. */ -static void scic_sds_remote_device_resume_complete_handler( - void *user_parameter) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)user_parameter; - - if ( - sci_base_state_machine_get_state(&sci_dev->state_machine) - != SCI_BASE_REMOTE_DEVICE_STATE_READY - ) { - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY - ); +static void scic_sds_remote_device_resume_complete_handler(void *_dev) +{ + struct scic_sds_remote_device *sci_dev = _dev; + enum scic_sds_remote_device_states state; + + state = sci_dev->state_machine.current_state_id; + switch (state) { + case SCI_BASE_REMOTE_DEVICE_STATE_READY: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + break; + default: + /* go 'ready' if we are not already in a ready state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY); + break; } } @@ -284,7 +338,7 @@ static void scic_sds_remote_device_resume_complete_handler( * This method will perform the STP request start processing common to IO * requests and task requests of all types. none */ -void scic_sds_remote_device_start_request( +static void scic_sds_remote_device_start_request( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req, enum sci_status status) @@ -308,7 +362,7 @@ void scic_sds_remote_device_start_request( * serves as a callback when RNC gets resumed during a task management * sequence. none */ -void scic_sds_remote_device_continue_request(void *dev) +static void scic_sds_remote_device_continue_request(void *dev) { struct scic_sds_remote_device *sci_dev = dev; @@ -368,7 +422,7 @@ default_device_handler(struct scic_sds_remote_device *sci_dev, return SCI_FAILURE_INVALID_STATE; } -enum sci_status scic_sds_remote_device_default_start_handler( +static enum sci_status scic_sds_remote_device_default_start_handler( struct scic_sds_remote_device *sci_dev) { return default_device_handler(sci_dev, __func__); @@ -380,37 +434,37 @@ static enum sci_status scic_sds_remote_device_default_stop_handler( return default_device_handler(sci_dev, __func__); } -enum sci_status scic_sds_remote_device_default_fail_handler( +static enum sci_status scic_sds_remote_device_default_fail_handler( struct scic_sds_remote_device *sci_dev) { return default_device_handler(sci_dev, __func__); } -enum sci_status scic_sds_remote_device_default_destruct_handler( +static enum sci_status scic_sds_remote_device_default_destruct_handler( struct scic_sds_remote_device *sci_dev) { return default_device_handler(sci_dev, __func__); } -enum sci_status scic_sds_remote_device_default_reset_handler( +static enum sci_status scic_sds_remote_device_default_reset_handler( struct scic_sds_remote_device *sci_dev) { return default_device_handler(sci_dev, __func__); } -enum sci_status scic_sds_remote_device_default_reset_complete_handler( +static enum sci_status scic_sds_remote_device_default_reset_complete_handler( struct scic_sds_remote_device *sci_dev) { return default_device_handler(sci_dev, __func__); } -enum sci_status scic_sds_remote_device_default_suspend_handler( +static enum sci_status scic_sds_remote_device_default_suspend_handler( struct scic_sds_remote_device *sci_dev, u32 suspend_type) { return default_device_handler(sci_dev, __func__); } -enum sci_status scic_sds_remote_device_default_resume_handler( +static enum sci_status scic_sds_remote_device_default_resume_handler( struct scic_sds_remote_device *sci_dev) { return default_device_handler(sci_dev, __func__); @@ -505,7 +559,7 @@ static enum sci_status scic_sds_remote_device_default_event_handler( * releases the frame and returns a failure. enum sci_status * SCI_FAILURE_INVALID_STATE */ -enum sci_status scic_sds_remote_device_default_frame_handler( +static enum sci_status scic_sds_remote_device_default_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) { @@ -525,21 +579,21 @@ enum sci_status scic_sds_remote_device_default_frame_handler( return SCI_FAILURE_INVALID_STATE; } -enum sci_status scic_sds_remote_device_default_start_request_handler( +static enum sci_status scic_sds_remote_device_default_start_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { return default_device_handler(sci_dev, __func__); } -enum sci_status scic_sds_remote_device_default_complete_request_handler( +static enum sci_status scic_sds_remote_device_default_complete_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { return default_device_handler(sci_dev, __func__); } -enum sci_status scic_sds_remote_device_default_continue_request_handler( +static enum sci_status scic_sds_remote_device_default_continue_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) { @@ -558,7 +612,7 @@ enum sci_status scic_sds_remote_device_default_continue_request_handler( * This method decodes the tag for the io request object and routes the * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE */ -enum sci_status scic_sds_remote_device_general_frame_handler( +static enum sci_status scic_sds_remote_device_general_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) { @@ -602,7 +656,7 @@ enum sci_status scic_sds_remote_device_general_frame_handler( * This is a common method for handling events reported to the remote device * from the controller object. enum sci_status */ -enum sci_status scic_sds_remote_device_general_event_handler( +static enum sci_status scic_sds_remote_device_general_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code) { @@ -705,7 +759,7 @@ static enum sci_status scic_sds_remote_device_starting_state_stop_handler( return SCI_SUCCESS; } -enum sci_status scic_sds_remote_device_ready_state_stop_handler( +static enum sci_status scic_sds_remote_device_ready_state_stop_handler( struct scic_sds_remote_device *sci_dev) { enum sci_status status = SCI_SUCCESS; @@ -731,7 +785,7 @@ enum sci_status scic_sds_remote_device_ready_state_stop_handler( * * This is the ready state device reset handler enum sci_status */ -enum sci_status scic_sds_remote_device_ready_state_reset_handler( +static enum sci_status scic_sds_remote_device_ready_state_reset_handler( struct scic_sds_remote_device *sci_dev) { /* Request the parent state machine to transition to the stopping state */ @@ -893,34 +947,15 @@ static enum sci_status scic_sds_remote_device_stopping_state_complete_request_ha return SCI_SUCCESS; } -/** - * - * @device: The struct scic_sds_remote_device which is to be cast into a - * struct scic_sds_remote_device object. - * - * This method will complete the reset operation when the device is in the - * resetting state. enum sci_status - */ static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( struct scic_sds_remote_device *sci_dev) { - - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY - ); + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY); return SCI_SUCCESS; } -/** - * - * @device: The struct scic_sds_remote_device which is to be cast into a - * struct scic_sds_remote_device object. - * - * This method will stop the remote device while in the resetting state. - * enum sci_status - */ static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( struct scic_sds_remote_device *sci_dev) { @@ -932,12 +967,11 @@ static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( return SCI_SUCCESS; } -/* - * This method completes requests for this struct scic_sds_remote_device while it is - * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the - * complete method for the request object and if that is successful the port - * object is called to complete the task request. Then the device object itself - * completes the task request. enum sci_status +/* complete requests for this device while it is in the + * SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the complete + * method for the request object and if that is successful the port object is + * called to complete the task request. Then the device object itself completes + * the task request. enum sci_status */ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( struct scic_sds_remote_device *sci_dev, @@ -960,173 +994,665 @@ static enum sci_status scic_sds_remote_device_resetting_state_complete_request_h return status; } -static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { - [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .start_handler = scic_sds_remote_device_stopped_state_start_handler, - .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_starting_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, - .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, - .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - } -}; - -static void scic_sds_remote_device_initial_state_enter(void *object) +static enum sci_status scic_sds_stp_remote_device_complete_request(struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) { - struct scic_sds_remote_device *sci_dev = object; + enum sci_status status; - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); + status = scic_sds_io_request_complete(sci_req); + if (status != SCI_SUCCESS) + goto out; - /* Initial state is a transitional state to the stopped state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); + status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + goto out; + + scic_sds_remote_device_decrement_request_count(sci_dev); + if (sci_req->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* This request causes hardware error, device needs to be Lun Reset. + * So here we force the state machine to IDLE state so the rest IOs + * can reach RNC state handler, these IOs will be completed by RNC with + * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". + */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET); + } else if (scic_sds_remote_device_get_request_count(sci_dev) == 0) + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + + + out: + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(sci_dev), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", __func__, sci_dev->owning_port, + sci_dev, sci_req, status); + + return status; } -/** - * isci_remote_device_change_state() - This function gets the status of the - * remote_device object. - * @isci_device: This parameter points to the isci_remote_device object +/* scic_sds_stp_remote_device_ready_substate_start_request_handler - start stp + * @device: The target device a task management request towards to. + * @request: The task request. * - * status of the object as a isci_status enum. + * This is the READY NCQ substate handler to start task management request. In + * this routine, we suspend and resume the RNC. enum sci_status Always return + * SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to let + * controller_start_task_handler know that the controller can't post TC for + * task request yet, instead, when RNC gets resumed, a controller_continue_task + * callback will be called. */ -void isci_remote_device_change_state( - struct isci_remote_device *isci_device, - enum isci_status status) +static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + enum sci_status status; + + /* Will the port allow the io request to start? */ + status = device->owning_port->state_handlers->start_io_handler( + device->owning_port, device, request); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_task(&device->rnc, request); + if (status != SCI_SUCCESS) + goto out; + + status = request->state_handlers->start_handler(request); + if (status != SCI_SUCCESS) + goto out; + + /* + * Note: If the remote device state is not IDLE this will replace + * the request that probably resulted in the task management request. + */ + device->working_request = request; + sci_base_state_machine_change_state(&device->state_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + + /* + * The remote node context must cleanup the TCi to NCQ mapping table. + * The only way to do this correctly is to either write to the TLCR + * register or to invalidate and repost the RNC. In either case the + * remote node context state machine will take the correct action when + * the remote node context is suspended and later resumed. + */ + scic_sds_remote_node_context_suspend(&device->rnc, + SCI_SOFTWARE_SUSPENSION, NULL, NULL); + scic_sds_remote_node_context_resume(&device->rnc, + scic_sds_remote_device_continue_request, + device); + +out: + scic_sds_remote_device_start_request(device, request, status); + /* + * We need to let the controller start request handler know that it can't + * post TC yet. We will provide a callback function to post TC when RNC gets + * resumed. + */ + return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; +} + +/* handle the start io operation for a sata device that is in the command idle + * state. - Evalute the type of IO request to be started - If its an NCQ + * request change to NCQ substate - If its any other command change to the CMD + * substate + * + * If this is a softreset we may want to have a different substate. + */ +static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status status; + struct isci_request *isci_request = request->ireq; + enum scic_sds_remote_device_states new_state; + + /* Will the port allow the io request to start? */ + status = sci_dev->owning_port->state_handlers->start_io_handler( + sci_dev->owning_port, sci_dev, request); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); + if (status != SCI_SUCCESS) + goto out; + + status = request->state_handlers->start_handler(request); + if (status != SCI_SUCCESS) + goto out; + + if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) + new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ; + else { + sci_dev->working_request = request; + new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD; + } + sci_base_state_machine_change_state(&sci_dev->state_machine, new_state); +out: + scic_sds_remote_device_start_request(sci_dev, request, status); + return status; +} + + +static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + enum sci_status status; + + status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); + if (status != SCI_SUCCESS) + return status; + + /* We pick up suspension events to handle specifically to this state. We + * resume the RNC right away. enum sci_status + */ + if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || + scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) + status = scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); + + return status; +} + +static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status status; + struct isci_request *isci_request = request->ireq; + scic_sds_port_io_request_handler_t start_io; + + if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { + start_io = sci_dev->owning_port->state_handlers->start_io_handler; + status = start_io(sci_dev->owning_port, sci_dev, request); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); + if (status != SCI_SUCCESS) + return status; + + status = request->state_handlers->start_handler(request); + + scic_sds_remote_device_start_request(sci_dev, request, status); + } else + status = SCI_FAILURE_INVALID_STATE; + + return status; +} + +static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler(struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + enum sci_status status; + struct sata_fis_header *frame_header; + struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + if (status != SCI_SUCCESS) + return status; + + if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS && + (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { + sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + /* TODO Check sactive and complete associated IO if any. */ + + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H && + (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { + /* + * Some devices return D2H FIS when an NCQ error is detected. + * Treat this like an SDB error FIS ready reason. + */ + sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + } else + status = SCI_FAILURE; + + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + /* device is already handling a command it can not accept new commands + * until this one is complete. + */ + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type) +{ + enum sci_status status; + + status = scic_sds_remote_node_context_suspend(&sci_dev->rnc, + suspend_type, NULL, NULL); + + return status; +} + +static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + /* The device doe not process any UF received from the hardware while + * in this state. All unsolicited frames are forwarded to the io + * request object. + */ + return scic_sds_io_request_frame_handler(sci_dev->working_request, + frame_index); +} + +static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; +} + +static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + struct scic_sds_request *sci_req = request; + enum sci_status status; + + status = scic_sds_io_request_complete(sci_req); + if (status != SCI_SUCCESS) + goto out; + + status = scic_sds_port_complete_io(device->owning_port, device, sci_req); + if (status != SCI_SUCCESS) + goto out; + + scic_sds_remote_device_decrement_request_count(device); + out: + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(device), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", + __func__, device->owning_port, device, sci_req, status); + + return status; +} + +static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) +{ + struct scic_sds_remote_device *sci_dev = _dev; + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); + struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + + /* For NCQ operation we do not issue a isci_remote_device_not_ready(). + * As a result, avoid sending the ready notification. + */ + if (sci_dev->state_machine.previous_state_id != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) + isci_remote_device_ready(scic->ihost, idev); +} + +static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + enum sci_status status; + + /* Will the port allow the io request to start? */ + status = sci_dev->owning_port->state_handlers->start_io_handler( + sci_dev->owning_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_request_start(sci_req); + if (status != SCI_SUCCESS) + return status; + + sci_dev->working_request = sci_req; + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + + scic_sds_remote_device_start_request(sci_dev, sci_req, status); + + return status; +} + +static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request) +{ + /* device is already handling a command it can not accept new commands + * until this one is complete. + */ + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status +scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler(struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + enum sci_status status; + + status = scic_sds_io_request_complete(sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) { + dev_err(scirdev_to_dev(sci_dev), + "%s: SCIC SDS Remote Device 0x%p io request " + "0x%p could not be completd on the port 0x%p " + "failed with status %d.\n", __func__, sci_dev, sci_req, + sci_dev->owning_port, status); + return status; + } + + scic_sds_remote_device_decrement_request_count(sci_dev); + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + + return status; +} + +static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + enum sci_status status; + + /* The device does not process any UF received from the hardware while + * in this state. All unsolicited frames are forwarded to the io request + * object. + */ + status = scic_sds_io_request_frame_handler( + sci_dev->working_request, + frame_index + ); + + return status; +} + +static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { + [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { + .start_handler = scic_sds_remote_device_stopped_state_start_handler, + .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_starting_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, + .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, + .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_stp_remote_device_complete_request, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, + .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, + .complete_task_handler = scic_sds_stp_remote_device_complete_request, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, + .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + } +}; + +static void scic_sds_remote_device_initial_state_enter(void *object) { - unsigned long flags; + struct scic_sds_remote_device *sci_dev = object; - spin_lock_irqsave(&isci_device->state_lock, flags); - isci_device->status = status; - spin_unlock_irqrestore(&isci_device->state_lock, flags); + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); + + /* Initial state is a transitional state to the stopped state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); } /** @@ -1242,9 +1768,8 @@ static void scic_sds_remote_device_starting_state_enter(void *object) static void scic_sds_remote_device_ready_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); + struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + struct domain_device *dev = sci_dev_to_domain(sci_dev); SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, @@ -1252,23 +1777,26 @@ static void scic_sds_remote_device_ready_state_enter(void *object) scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; - if (sci_dev->has_ready_substate_machine) - sci_base_state_machine_start(&sci_dev->ready_substate_machine); - else - isci_remote_device_ready(ihost, idev); + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } else if (dev_is_expander(dev)) { + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } else + isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev)); } static void scic_sds_remote_device_ready_state_exit(void *object) { struct scic_sds_remote_device *sci_dev = object; - if (sci_dev->has_ready_substate_machine) - sci_base_state_machine_stop(&sci_dev->ready_substate_machine); - else { - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = scic->ihost; + struct domain_device *dev = sci_dev_to_domain(sci_dev); + + if (dev->dev_type == SAS_END_DEV) { + struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - isci_remote_device_not_ready(ihost, idev, + isci_remote_device_not_ready(scic->ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); } } @@ -1327,6 +1855,101 @@ static void scic_sds_remote_device_final_state_enter(void *object) ); } +static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *object) +{ + struct scic_sds_remote_device *sci_dev = object; + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + + sci_dev->working_request = NULL; + if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { + /* + * Since the RNC is ready, it's alright to finish completion + * processing (e.g. signal the remote device is ready). */ + scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(sci_dev); + } else { + scic_sds_remote_node_context_resume(&sci_dev->rnc, + scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, + sci_dev); + } +} + +static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) +{ + struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + + BUG_ON(sci_dev->working_request == NULL); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + + isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev), + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); +} + +static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object) +{ + struct scic_sds_remote_device *sci_dev = object; + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); +} + +static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(void *object) +{ + struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + + if (sci_dev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) + isci_remote_device_not_ready(scic->ihost, idev, + sci_dev->not_ready_reason); +} + +static void scic_sds_stp_remote_device_ready_await_reset_substate_enter(void *object) +{ + struct scic_sds_remote_device *sci_dev = object; + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET); +} + +static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) +{ + struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + + isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev)); +} + +static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) +{ + struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + + BUG_ON(sci_dev->working_request == NULL); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + + isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev), + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); +} + +static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object) +{ + struct scic_sds_remote_device *sci_dev = object; + + sci_dev->working_request = NULL; +} static const struct sci_base_state scic_sds_remote_device_state_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { @@ -1342,6 +1965,28 @@ static const struct sci_base_state scic_sds_remote_device_state_table[] = { .enter_state = scic_sds_remote_device_ready_state_enter, .exit_state = scic_sds_remote_device_ready_state_exit }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { + .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { + .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, + }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { + .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter, + }, + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, + }, + [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, + .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, + }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { .enter_state = scic_sds_remote_device_stopping_state_enter, }, @@ -1406,7 +2051,6 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci struct scic_sds_remote_device *sci_dev) { enum sci_status status; - u16 remote_node_index; struct domain_device *dev = sci_dev_to_domain(sci_dev); scic_remote_device_construct(sci_port, sci_dev); @@ -1418,33 +2062,15 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci sci_dev->is_direct_attached = true; status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller, sci_dev, - &remote_node_index); + &sci_dev->rnc.remote_node_index); if (status != SCI_SUCCESS) return status; - sci_dev->rnc.remote_node_index = remote_node_index; - - if (dev->dev_type == SAS_END_DEV) - sci_dev->has_ready_substate_machine = false; - else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { - sci_dev->has_ready_substate_machine = true; - - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - sci_dev, - scic_sds_stp_remote_device_ready_substate_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (dev_is_expander(dev)) { - sci_dev->has_ready_substate_machine = true; - - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - sci_dev, - scic_sds_smp_remote_device_ready_substate_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else + if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || + (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev)) + /* pass */; + else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(sci_port); @@ -1470,37 +2096,22 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev) { - struct scic_sds_controller *scic = sci_port->owning_controller; struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status; scic_remote_device_construct(sci_port, sci_dev); - status = scic_sds_controller_allocate_remote_node_context( - scic, sci_dev, &sci_dev->rnc.remote_node_index); + status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller, + sci_dev, + &sci_dev->rnc.remote_node_index); if (status != SCI_SUCCESS) return status; - if (dev->dev_type == SAS_END_DEV) - sci_dev->has_ready_substate_machine = false; - else if (dev_is_expander(dev)) { - sci_dev->has_ready_substate_machine = true; - - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - sci_dev, - scic_sds_smp_remote_device_ready_substate_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { - sci_dev->has_ready_substate_machine = true; - - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - sci_dev, - scic_sds_stp_remote_device_ready_substate_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } + if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || + (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev)) + /* pass */; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; /* * For SAS-2 the physical link rate is actually a logical link @@ -1515,7 +2126,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci /* / @todo Should I assign the port width by reading all of the phys on the port? */ sci_dev->device_port_width = 1; - return status; + return SCI_SUCCESS; } /** @@ -1618,45 +2229,6 @@ isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) } /** - * isci_remote_device_ready() - This function is called by the scic when the - * remote device is ready. We mark the isci device as ready and signal the - * waiting proccess. - * @ihost: our valid isci_host - * @idev: remote device - * - */ -void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev) -{ - dev_dbg(&ihost->pdev->dev, - "%s: idev = %p\n", __func__, idev); - - isci_remote_device_change_state(idev, isci_ready_for_io); - if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) - wake_up(&ihost->eventq); -} - -/** - * isci_remote_device_not_ready() - This function is called by the scic when - * the remote device is not ready. We mark the isci device as ready (not - * "ready_for_io") and signal the waiting proccess. - * @isci_host: This parameter specifies the isci host object. - * @isci_device: This parameter specifies the remote device - * - */ -void isci_remote_device_not_ready(struct isci_host *ihost, - struct isci_remote_device *idev, u32 reason) -{ - dev_dbg(&ihost->pdev->dev, - "%s: isci_device = %p\n", __func__, idev); - - if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) - isci_remote_device_change_state(idev, isci_stopping); - else - /* device ready is actually a "not ready for io" state. */ - isci_remote_device_change_state(idev, isci_ready); -} - -/** * isci_remote_device_stop() - This function is called internally to stop the * remote device. * @isci_host: This parameter specifies the isci host object. diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 62623c7..dda217a 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -68,9 +68,7 @@ enum scic_remote_device_not_ready_reason_code { SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, - SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX - }; struct scic_sds_remote_device { @@ -132,19 +130,6 @@ struct scic_sds_remote_device { u32 not_ready_reason; /** - * This field is true if this remote device has an initialzied ready substate - * machine. SSP devices do not have a ready substate machine and STP devices - * have a ready substate machine. - */ - bool has_ready_substate_machine; - - /** - * This field contains the state machine for the ready substate machine for - * this struct scic_sds_remote_device object. - */ - struct sci_base_state_machine ready_substate_machine; - - /** * This field maintains the set of state handlers for the remote device * object. These are changed each time the remote device enters a new state. */ @@ -171,10 +156,6 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev); void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev); -void isci_remote_device_ready(struct isci_host *ihost, - struct isci_remote_device *idev); -void isci_remote_device_not_ready(struct isci_host *ihost, - struct isci_remote_device *idev, u32 reason); void isci_remote_device_gone(struct domain_device *domain_dev); int isci_remote_device_found(struct domain_device *domain_dev); bool isci_device_is_reset_pending(struct isci_host *ihost, @@ -278,77 +259,6 @@ enum scic_sds_remote_device_states { SCI_BASE_REMOTE_DEVICE_STATE_READY, /** - * This state indicates that the remote device is in the process of - * stopping. In this state no new IO operations are permitted, but - * existing IO operations are allowed to complete. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, - - /** - * This state indicates that the remote device has failed. - * In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the READY state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_FAILED, - - /** - * This state indicates the device is being reset. - * In this state no new IO operations are permitted. - * This state is entered from the READY state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, - - /** - * Simply the final state for the base remote device state machine. - */ - SCI_BASE_REMOTE_DEVICE_STATE_FINAL, -}; - -/** - * enum scic_sds_ssp_remote_device_ready_substates - - * - * This is the enumeration of the ready substates for the - * struct scic_sds_remote_device. - */ -enum scic_sds_ssp_remote_device_ready_substates { - /** - * This is the initial state for the remote device ready substate. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL, - - /** - * This is the ready operational substate for the remote device. - * This is the normal operational state for a remote device. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL, - - /** - * This is the suspended state for the remote device. This is the state - * that the device is placed in when a RNC suspend is received by - * the SCU hardware. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED, - - /** - * This is the final state that the device is placed in before a change - * to the base state machine. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL, - - SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES -}; - -/** - * enum scic_sds_stp_remote_device_ready_substates - - * - * This is the enumeration for the struct scic_sds_remote_device ready substates - * for the STP remote device. - */ -enum scic_sds_stp_remote_device_ready_substates { - /** * This is the idle substate for the stp remote device. When there are no * active IO for the device it is is in this state. */ @@ -381,14 +291,7 @@ enum scic_sds_stp_remote_device_ready_substates { * coming to be recovered from certain hardware specific error. */ SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET, -}; -/** - * enum scic_sds_smp_remote_device_ready_substates - - * - * This is the enumeration of the ready substates for the SMP REMOTE DEVICE. - */ -enum scic_sds_smp_remote_device_ready_substates { /** * This is the ready operational substate for the remote device. This is the * normal operational state for a remote device. @@ -400,6 +303,35 @@ enum scic_sds_smp_remote_device_ready_substates { * the device is placed in when a RNC suspend is received by the SCU hardware. */ SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD, + + /** + * This state indicates that the remote device is in the process of + * stopping. In this state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, + + /** + * This state indicates that the remote device has failed. + * In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FAILED, + + /** + * This state indicates the device is being reset. + * In this state no new IO operations are permitted. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, + + /** + * Simply the final state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FINAL, }; static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) @@ -541,10 +473,6 @@ struct scic_sds_remote_device_state_handler { scic_sds_remote_device_frame_handler_t frame_handler; }; -extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[]; -extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[]; -extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; - /** * scic_sds_remote_device_increment_request_count() - * @@ -672,92 +600,24 @@ enum sci_status scic_sds_remote_device_start_io( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request); -enum sci_status scic_sds_remote_device_complete_io( +enum sci_status scic_sds_remote_device_start_task( struct scic_sds_controller *controller, struct scic_sds_remote_device *sci_dev, struct scic_sds_request *io_request); -enum sci_status scic_sds_remote_device_resume( - struct scic_sds_remote_device *sci_dev); +enum sci_status scic_sds_remote_device_complete_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request); enum sci_status scic_sds_remote_device_suspend( struct scic_sds_remote_device *sci_dev, u32 suspend_type); -enum sci_status scic_sds_remote_device_start_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); - void scic_sds_remote_device_post_request( struct scic_sds_remote_device *sci_dev, u32 request); #define scic_sds_remote_device_is_atapi(sci_dev) false -void scic_sds_remote_device_start_request( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req, - enum sci_status status); - -void scic_sds_remote_device_continue_request(void *sci_dev); - -enum sci_status scic_sds_remote_device_default_start_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_fail_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_destruct_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_reset_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_default_start_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_suspend_handler( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type); - -enum sci_status scic_sds_remote_device_default_resume_handler( - struct scic_sds_remote_device *sci_dev); - - -enum sci_status scic_sds_remote_device_default_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_general_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -enum sci_status scic_sds_remote_device_general_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code); - -enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler( - struct scic_sds_remote_device *sci_dev); - - - #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ diff --git a/drivers/scsi/isci/smp_remote_device.c b/drivers/scsi/isci/smp_remote_device.c deleted file mode 100644 index 45340a5..0000000 --- a/drivers/scsi/isci/smp_remote_device.c +++ /dev/null @@ -1,310 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "scic_sds_controller.h" -#include "scic_sds_port.h" -#include "remote_device.h" -#include "scic_sds_request.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_event_codes.h" -#include "scu_task_context.h" - -/* - * ***************************************************************************** - * * SMP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @[in]: device The device the io is sent to. - * @[in]: request The io to start. - * - * This method will handle the start io operation for a SMP device that is in - * the idle state. enum sci_status - */ -static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - - /* Will the port allow the io request to start? */ - status = device->owning_port->state_handlers->start_io_handler( - device->owning_port, device, request); - - if (status == SCI_SUCCESS) { - status = scic_sds_remote_node_context_start_io(&device->rnc, request); - - if (status == SCI_SUCCESS) - status = scic_sds_request_start(request); - - if (status == SCI_SUCCESS) { - device->working_request = request; - - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD - ); - } - - scic_sds_remote_device_start_request(device, request, status); - } - - return status; -} - - -/* - * ****************************************************************************** - * * SMP REMOTE DEVICE READY SUBSTATE CMD HANDLERS - * ****************************************************************************** */ -/** - * - * @device: This is the device object that is receiving the IO. - * @request: The io to start. - * - * This device is already handling a command it can not accept new commands - * until this one is complete. enum sci_status - */ -static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - return SCI_FAILURE_INVALID_STATE; -} - - -/** - * this is the complete_io_handler for smp device at ready cmd substate. - * @device: This is the device object that is receiving the IO. - * @request: The io to start. - * - * enum sci_status - */ -static enum sci_status -scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - struct scic_sds_request *sci_req; - - sci_req = (struct scic_sds_request *)request; - - status = scic_sds_io_request_complete(sci_req); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - device->owning_port, device, sci_req); - - if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(device); - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE - ); - } else - dev_err(scirdev_to_dev(device), - "%s: SCIC SDS Remote Device 0x%p io request " - "0x%p could not be completd on the port 0x%p " - "failed with status %d.\n", - __func__, - device, - sci_req, - device->owning_port, - status); - } - - return status; -} - -/** - * This is frame handler for smp device ready cmd substate. - * @sci_dev: This is the device object that is receiving the frame. - * @frame_index: The index for the frame received. - * - * enum sci_status - */ -static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status status; - - /* - * / The device does not process any UF received from the hardware while - * / in this state. All unsolicited frames are forwarded to the io request - * / object. */ - status = scic_sds_io_request_frame_handler( - sci_dev->working_request, - frame_index - ); - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_remote_device_state_handler scic_sds_smp_remote_device_ready_substate_handler_table[] = { - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, - .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler - } -}; - -/** - * - * @object: This is the object which is cast into a - * struct scic_sds_remote_device. - * - * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE enter method. - * This function sets the ready cmd substate handlers and reports the device as - * ready. none - */ -static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - - SET_STATE_HANDLER(sci_dev, - scic_sds_smp_remote_device_ready_substate_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - - isci_remote_device_ready(ihost, idev); -} - -/** - * - * @object: This is the object which is cast into a - * struct scic_sds_remote_device. - * - * This is the SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD enter method. This - * function sets the remote device objects ready cmd substate handlers, and - * notify core user that the device is not ready. none - */ -static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - - BUG_ON(sci_dev->working_request == NULL); - - SET_STATE_HANDLER(sci_dev, - scic_sds_smp_remote_device_ready_substate_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - - isci_remote_device_not_ready(ihost, idev, - SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); -} - -/** - * - * @object: This is the object which is cast into a - * struct scic_sds_remote_device. - * - * This is the SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_CMD exit method. none - */ -static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - sci_dev->working_request = NULL; -} - -/* --------------------------------------------------------------------------- */ - -const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[] = { - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, - }, - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, - .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, - }, -}; diff --git a/drivers/scsi/isci/stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c deleted file mode 100644 index 1853552..0000000 --- a/drivers/scsi/isci/stp_remote_device.c +++ /dev/null @@ -1,716 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "intel_ata.h" -#include "intel_sata.h" -#include "intel_sat.h" -#include "sci_base_state.h" -#include "scic_sds_controller.h" -#include "scic_sds_port.h" -#include "remote_device.h" -#include "scic_sds_request.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_event_codes.h" - -/** - * This method will perform the STP request completion processing common to IO - * requests and task requests of all types - * @device: This parameter specifies the device for which the request is being - * completed. - * @request: This parameter specifies the request being completed. - * - * This method returns an indication as to whether the request processing - * completed successfully. - */ -static enum sci_status scic_sds_stp_remote_device_complete_request( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - - status = scic_sds_io_request_complete(request); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - device->owning_port, device, request); - - if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(device); - if (request->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - /* - * This request causes hardware error, device needs to be Lun Reset. - * So here we force the state machine to IDLE state so the rest IOs - * can reach RNC state handler, these IOs will be completed by RNC with - * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET - ); - } else if (scic_sds_remote_device_get_request_count(device) == 0) { - sci_base_state_machine_change_state( - &device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE - ); - } - } - } - - if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(device), - "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " - "could not complete\n", - __func__, - device->owning_port, - device, - request, - status); - - return status; -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY COMMON SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * This is the READY NCQ substate handler to start task management request. In - * this routine, we suspend and resume the RNC. - * @device: The target device a task management request towards to. - * @request: The task request. - * - * enum sci_status Always return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to - * let controller_start_task_handler know that the controller can't post TC for - * task request yet, instead, when RNC gets resumed, a controller_continue_task - * callback will be called. - */ -static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - - /* Will the port allow the io request to start? */ - status = device->owning_port->state_handlers->start_io_handler( - device->owning_port, device, request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_task(&device->rnc, request); - if (status != SCI_SUCCESS) - goto out; - - status = request->state_handlers->start_handler(request); - if (status != SCI_SUCCESS) - goto out; - - /* - * Note: If the remote device state is not IDLE this will replace - * the request that probably resulted in the task management request. - */ - device->working_request = request; - sci_base_state_machine_change_state(&device->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - - /* - * The remote node context must cleanup the TCi to NCQ mapping table. - * The only way to do this correctly is to either write to the TLCR - * register or to invalidate and repost the RNC. In either case the - * remote node context state machine will take the correct action when - * the remote node context is suspended and later resumed. - */ - scic_sds_remote_node_context_suspend(&device->rnc, - SCI_SOFTWARE_SUSPENSION, NULL, NULL); - scic_sds_remote_node_context_resume(&device->rnc, - scic_sds_remote_device_continue_request, - device); - -out: - scic_sds_remote_device_start_request(device, request, status); - /* - * We need to let the controller start request handler know that it can't - * post TC yet. We will provide a callback function to post TC when RNC gets - * resumed. - */ - return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY IDLE SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * This method will handle the start io operation for a sata device that is in - * the command idle state. - Evalute the type of IO request to be started - - * If its an NCQ request change to NCQ substate - If its any other command - * change to the CMD substate - * @device: - * @request: - * - * If this is a softreset we may want to have a different substate. - * enum sci_status - */ -static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status; - struct isci_request *isci_request = request->ireq; - - - /* Will the port allow the io request to start? */ - status = sci_dev->owning_port->state_handlers->start_io_handler( - sci_dev->owning_port, sci_dev, request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (status != SCI_SUCCESS) - goto out; - - status = request->state_handlers->start_handler(request); - if (status != SCI_SUCCESS) - goto out; - - if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { - sci_base_state_machine_change_state(&sci_dev->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); - } else { - sci_dev->working_request = request; - sci_base_state_machine_change_state(&sci_dev->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - } -out: - scic_sds_remote_device_start_request(sci_dev, request, status); - return status; -} - - -/** - * - * @[in]: device The device received event. - * @[in]: event_code The event code. - * - * This method will handle the event for a sata device that is in the idle - * state. We pick up suspension events to handle specifically to this state. We - * resume the RNC right away. enum sci_status - */ -static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - enum sci_status status; - - status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); - - if (status == SCI_SUCCESS) { - if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX - || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) { - status = scic_sds_remote_node_context_resume( - &sci_dev->rnc, NULL, NULL); - } - } - - return status; -} - - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS - * ***************************************************************************** */ - -static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status; - struct isci_request *isci_request = request->ireq; - - if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { - status = sci_dev->owning_port->state_handlers->start_io_handler( - sci_dev->owning_port, - sci_dev, - request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (status != SCI_SUCCESS) - return status; - - status = request->state_handlers->start_handler(request); - - scic_sds_remote_device_start_request(sci_dev, request, status); - } else - status = SCI_FAILURE_INVALID_STATE; - - return status; -} - - -/** - * This method will handle events received while the STP device is in the ready - * command substate. - * @sci_dev: This is the device object that is receiving the event. - * @event_code: The event code to process. - * - * enum sci_status - */ - -static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status status; - struct sata_fis_header *frame_header; - - status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), - frame_index, - (void **)&frame_header - ); - - if (status == SCI_SUCCESS) { - if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS && - (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { - sci_dev->not_ready_reason = - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; - - /* - * / @todo Check sactive and complete associated IO - * if any. - */ - - sci_base_state_machine_change_state( - &sci_dev->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR - ); - } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H && - (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { - - /* - * Some devices return D2H FIS when an NCQ error is detected. - * Treat this like an SDB error FIS ready reason. - */ - sci_dev->not_ready_reason = - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; - - sci_base_state_machine_change_state( - &sci_dev->ready_substate_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR - ); - } else { - status = SCI_FAILURE; - } - - scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(sci_dev), frame_index - ); - } - - return status; -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY CMD SUBSTATE HANDLERS - * ***************************************************************************** */ - -/** - * This device is already handling a command it can not accept new commands - * until this one is complete. - * @device: - * @request: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type) -{ - enum sci_status status; - - status = scic_sds_remote_node_context_suspend(&sci_dev->rnc, - suspend_type, NULL, NULL); - - return status; -} - -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status status; - - /* - * / The device doe not process any UF received from the hardware while - * / in this state. All unsolicited frames are forwarded to the io request - * / object. */ - status = scic_sds_io_request_frame_handler( - sci_dev->working_request, - frame_index - ); - - return status; -} - - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY NCQ SUBSTATE HANDLERS - * ***************************************************************************** */ - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY NCQ ERROR SUBSTATE HANDLERS - * ***************************************************************************** */ - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE HANDLERS - * ***************************************************************************** */ -static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; -} - - - -/** - * This method will perform the STP request (both io or task) completion - * processing for await reset state. - * @device: This parameter specifies the device for which the request is being - * completed. - * @request: This parameter specifies the request being completed. - * - * This method returns an indication as to whether the request processing - * completed successfully. - */ -static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - struct scic_sds_request *sci_req = (struct scic_sds_request *)request; - enum sci_status status; - - status = scic_sds_io_request_complete(sci_req); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - device->owning_port, device, sci_req - ); - - if (status == SCI_SUCCESS) - scic_sds_remote_device_decrement_request_count(device); - } - - if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(device), - "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " - "could not complete\n", - __func__, - device->owning_port, - device, - sci_req, - status); - - return status; -} - -static const struct scic_sds_remote_device_state_handler scic_sds_stp_remote_device_ready_substate_handler_table[] = { - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, - .complete_io_handler = scic_sds_stp_remote_device_complete_request, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, - .complete_io_handler = scic_sds_stp_remote_device_complete_request, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_stp_remote_device_complete_request, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, - .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, - .complete_task_handler = scic_sds_stp_remote_device_complete_request, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - } -}; - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY SUBSTATE PRIVATE METHODS - * ***************************************************************************** */ - -static void -scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *user_cookie) -{ - struct scic_sds_remote_device *sci_dev = user_cookie; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = scic->ihost; - - /* - * For NCQ operation we do not issue a - * scic_cb_remote_device_not_ready(). As a result, avoid sending - * the ready notification. - */ - if (sci_dev->ready_substate_machine.previous_state_id != - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) - isci_remote_device_ready(ihost, idev); -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY IDLE SUBSTATE - * ***************************************************************************** */ - -/** - * - * @device: This is the object which is cast into a - * struct scic_sds_remote_device object. - * - */ -static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *device) -{ - struct scic_sds_remote_device *sci_dev = device; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE - ); - - sci_dev->working_request = NULL; - - if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { - /* - * Since the RNC is ready, it's alright to finish completion - * processing (e.g. signal the remote device is ready). */ - scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler( - sci_dev - ); - } else { - scic_sds_remote_node_context_resume( - &sci_dev->rnc, - scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, - sci_dev); - } -} - -static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - - BUG_ON(sci_dev->working_request == NULL); - - SET_STATE_HANDLER(sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - - isci_remote_device_not_ready(ihost, idev, - SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); -} - -static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - SET_STATE_HANDLER(sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); -} - -static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter( - void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = scic->ihost; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - - SET_STATE_HANDLER(sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); - - if (sci_dev->not_ready_reason == - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) - isci_remote_device_not_ready(ihost, idev, sci_dev->not_ready_reason); -} - -/* - * ***************************************************************************** - * * STP REMOTE DEVICE READY AWAIT RESET SUBSTATE - * ***************************************************************************** */ - -/** - * The enter routine to READY AWAIT RESET substate. - * @device: This is the object which is cast into a - * struct scic_sds_remote_device object. - * - */ -static void scic_sds_stp_remote_device_ready_await_reset_substate_enter( - void *device) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)device; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_stp_remote_device_ready_substate_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET - ); -} - -const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[] = { - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter, - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter, - }, -}; -- cgit v0.10.2 From 8f304c36ee415600c6bbc5de300e6fa3dbe59d6d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 29 Apr 2011 13:20:30 -0700 Subject: isci: kill scic_remote_device_get_connection_rate A function call to dereference a pointer is a tad much. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index fba6428..ffc1607 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -443,8 +443,7 @@ static void scu_ssp_reqeust_construct_task_context( task_context->abort = 0; task_context->priority = 0; task_context->initiator_request = 1; - task_context->connection_rate = - scic_remote_device_get_connection_rate(target_device); + task_context->connection_rate = target_device->connection_rate; task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index fff8668..2815da2 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -193,8 +193,7 @@ static void scu_smp_request_construct_task_context( */ task_context->priority = 0; task_context->initiator_request = 1; - task_context->connection_rate = - scic_remote_device_get_connection_rate(sci_dev); + task_context->connection_rate = sci_dev->connection_rate; task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index ec21546..8c98023 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -181,8 +181,7 @@ static void scu_sata_reqeust_construct_task_context( task_context->abort = 0; task_context->priority = SCU_TASK_PRIORITY_NORMAL; task_context->initiator_request = 1; - task_context->connection_rate = - scic_remote_device_get_connection_rate(target_device); + task_context->connection_rate = target_device->connection_rate; task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index f6da85e..834a3fe 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -152,22 +152,9 @@ enum sci_status scic_remote_device_reset_complete( return sci_dev->state_handlers->reset_complete_handler(sci_dev); } - -enum sas_linkrate scic_remote_device_get_connection_rate( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->connection_rate; -} - -/** - * - * - * Remote device timer requirements - */ #define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0) #define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES) - /** * * @sci_dev: The remote device for which the suspend is being requested. diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index dda217a..fd24df3 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -208,19 +208,6 @@ enum sci_status scic_remote_device_reset( enum sci_status scic_remote_device_reset_complete( struct scic_sds_remote_device *remote_device); - - -/** - * scic_remote_device_get_connection_rate() - This method simply returns the - * link rate at which communications to the remote device occur. - * @remote_device: This parameter specifies the device for which to get the - * connection rate. - * - * Return the link rate at which we transfer for the supplied remote device. - */ -enum sas_linkrate scic_remote_device_get_connection_rate( - struct scic_sds_remote_device *remote_device); - #define scic_remote_device_is_atapi(device_handle) false /** -- cgit v0.10.2 From f619fffb4070a577524fd9eb68cea484d86d2b97 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 10:13:04 -0700 Subject: isci: fix remote_device start_io regressions While reducing indentation commits 7ab92c9e "isci: make a remote_node_context a proper member of a remote_device", 0879e6a6 "isci: merge remote_device substates into a single state machine" broke handling of situations where i/o's successfully started at the port level need to terminated when the remote_node declines to start the i/o. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 834a3fe..3e567bf 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1157,10 +1157,8 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_ha return status; status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (status != SCI_SUCCESS) - return status; - - status = request->state_handlers->start_handler(request); + if (status == SCI_SUCCESS) + status = request->state_handlers->start_handler(request); scic_sds_remote_device_start_request(sci_dev, request, status); } else @@ -1302,16 +1300,17 @@ static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_h status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); if (status != SCI_SUCCESS) - return status; + goto out; status = scic_sds_request_start(sci_req); if (status != SCI_SUCCESS) - return status; + goto out; sci_dev->working_request = sci_req; sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + out: scic_sds_remote_device_start_request(sci_dev, sci_req, status); return status; -- cgit v0.10.2 From eb229671b1310c996dba7b78e21a9a9474edccdc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 14:05:57 -0700 Subject: isci: unify remote_device start_handlers Implement all states in scic_remote_device_start() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 3e567bf..80eccdc 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -291,7 +291,7 @@ static void scic_sds_cb_remote_device_rnc_destruct_complete(void *_dev) * ready state. This is the indication that the remote device object can also * transition to ready. */ -static void scic_sds_remote_device_resume_complete_handler(void *_dev) +static void remote_device_resume_done(void *_dev) { struct scic_sds_remote_device *sci_dev = _dev; enum scic_sds_remote_device_states state; @@ -409,12 +409,6 @@ default_device_handler(struct scic_sds_remote_device *sci_dev, return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_start_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - static enum sci_status scic_sds_remote_device_default_stop_handler( struct scic_sds_remote_device *sci_dev) { @@ -652,38 +646,6 @@ static enum sci_status scic_sds_remote_device_general_event_handler( true); } -/* - * ***************************************************************************** - * * STOPPED STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @device: - * - * This method takes the struct scic_sds_remote_device from a stopped state and - * attempts to start it. The RNC buffer for the device is constructed and the - * device state machine is transitioned to the - * SCIC_BASE_REMOTE_DEVICE_STATE_STARTING. enum sci_status SCI_SUCCESS if there is - * an RNC buffer available to construct the remote device. - * SCI_FAILURE_INSUFFICIENT_RESOURCES if there is no RNC buffer available in - * which to construct the remote device. - */ -static enum sci_status scic_sds_remote_device_stopped_state_start_handler( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status; - - status = scic_sds_remote_node_context_resume(&sci_dev->rnc, - scic_sds_remote_device_resume_complete_handler, sci_dev); - - if (status == SCI_SUCCESS) - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STARTING); - - return status; -} - static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( struct scic_sds_remote_device *sci_dev) { @@ -1373,7 +1335,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_default_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1390,7 +1351,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .start_handler = scic_sds_remote_device_stopped_state_start_handler, .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, @@ -1407,7 +1367,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_starting_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1424,7 +1383,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1441,7 +1399,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1458,7 +1415,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1475,7 +1431,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1492,7 +1447,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1509,7 +1463,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1526,7 +1479,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1543,7 +1495,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1560,7 +1511,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1577,7 +1527,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_default_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1594,7 +1543,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -1611,7 +1559,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .start_handler = scic_sds_remote_device_default_start_handler, .stop_handler = scic_sds_remote_device_default_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, @@ -2129,9 +2076,27 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci * the device when there have been no phys added to it. */ static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *sci_dev, - u32 timeout) + u32 timeout) { - return sci_dev->state_handlers->start_handler(sci_dev); + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_status status; + + if (state != SCI_BASE_REMOTE_DEVICE_STATE_STOPPED) { + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + status = scic_sds_remote_node_context_resume(&sci_dev->rnc, + remote_device_resume_done, + sci_dev); + if (status != SCI_SUCCESS) + return status; + + sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STARTING); + + return SCI_SUCCESS; } static enum sci_status isci_remote_device_construct(struct isci_port *iport, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index fd24df3..b778e0b 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The start_handler specifies the method invoked when a user - * attempts to start a remote device. - */ - scic_sds_remote_device_handler_t start_handler; - - /** * The stop_handler specifies the method invoked when a user attempts to * stop a remote device. */ -- cgit v0.10.2 From ec5756699b705c179a0680985e3d18a093f93fae Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 14:19:25 -0700 Subject: isci: unify remote_device stop_handlers Implement all states in scic_remote_device_stop() and delete the state handlers. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 80eccdc..d779939 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -129,13 +129,91 @@ static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote wake_up(&ihost->eventq); } +/* called once the remote node context is ready to be freed. + * The remote device can now report that its stop operation is complete. none + */ +static void rnc_destruct_done(void *_dev) +{ + struct scic_sds_remote_device *sci_dev = _dev; + BUG_ON(sci_dev->started_request_count != 0); + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); +} -enum sci_status scic_remote_device_stop( - struct scic_sds_remote_device *sci_dev, - u32 timeout) +static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds_remote_device *sci_dev) { - return sci_dev->state_handlers->stop_handler(sci_dev); + struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + u32 i, request_count = sci_dev->started_request_count; + enum sci_status status = SCI_SUCCESS; + + for (i = 0; i < SCI_MAX_IO_REQUESTS && i < request_count; i++) { + struct scic_sds_request *sci_req; + enum sci_status s; + + sci_req = scic->io_request_table[i]; + if (!sci_req || sci_req->target_device != sci_dev) + continue; + s = scic_controller_terminate_request(scic, sci_dev, sci_req); + if (s != SCI_SUCCESS) + status = s; + } + + return status; +} + +enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, + u32 timeout) +{ + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: + case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: + case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + default: + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: + return SCI_SUCCESS; + case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: + /* device not started so there had better be no requests */ + BUG_ON(sci_dev->started_request_count != 0); + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + rnc_destruct_done, sci_dev); + /* Transition to the stopping state and wait for the + * remote node to complete being posted and invalidated. + */ + sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + return SCI_SUCCESS; + case SCI_BASE_REMOTE_DEVICE_STATE_READY: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + if (sci_dev->started_request_count == 0) { + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + rnc_destruct_done, sci_dev); + return SCI_SUCCESS; + } else + return scic_sds_remote_device_terminate_requests(sci_dev); + break; + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: + /* All requests should have been terminated, but if there is an + * attempt to stop a device already in the stopping state, then + * try again to terminate. + */ + return scic_sds_remote_device_terminate_requests(sci_dev); + case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: + sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + return SCI_SUCCESS; + } } @@ -275,18 +353,6 @@ void scic_sds_remote_device_post_request( ); } -/* called once the remote node context is ready to be freed. - * The remote device can now report that its stop operation is complete. none - */ -static void scic_sds_cb_remote_device_rnc_destruct_complete(void *_dev) -{ - struct scic_sds_remote_device *sci_dev = _dev; - - BUG_ON(sci_dev->started_request_count != 0); - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); -} - /* called once the remote node context has transisitioned to a * ready state. This is the indication that the remote device object can also * transition to ready. @@ -358,47 +424,6 @@ static void scic_sds_remote_device_continue_request(void *dev) scic_controller_continue_io(sci_dev->working_request); } -/** - * This method will terminate all of the IO requests in the controllers IO - * request table that were targeted for this device. - * @sci_dev: This parameter specifies the remote device for which to - * attempt to terminate all requests. - * - * This method returns an indication as to whether all requests were - * successfully terminated. If a single request fails to be terminated, then - * this method will return the failure. - */ -static enum sci_status scic_sds_remote_device_terminate_requests( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status = SCI_SUCCESS; - enum sci_status terminate_status = SCI_SUCCESS; - struct scic_sds_request *sci_req; - u32 index; - u32 request_count = sci_dev->started_request_count; - - for (index = 0; - (index < SCI_MAX_IO_REQUESTS) && (request_count > 0); - index++) { - sci_req = sci_dev->owning_port->owning_controller->io_request_table[index]; - - if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) { - terminate_status = scic_controller_terminate_request( - sci_dev->owning_port->owning_controller, - sci_dev, - sci_req - ); - - if (terminate_status != SCI_SUCCESS) - status = terminate_status; - - request_count--; - } - } - - return status; -} - static enum sci_status default_device_handler(struct scic_sds_remote_device *sci_dev, const char *func) @@ -409,12 +434,6 @@ default_device_handler(struct scic_sds_remote_device *sci_dev, return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - static enum sci_status scic_sds_remote_device_default_fail_handler( struct scic_sds_remote_device *sci_dev) { @@ -646,12 +665,6 @@ static enum sci_status scic_sds_remote_device_general_event_handler( true); } -static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - return SCI_SUCCESS; -} - /** * * @sci_dev: The struct scic_sds_remote_device which is cast into a @@ -679,54 +692,6 @@ static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( return SCI_SUCCESS; } -/* - * ***************************************************************************** - * * STARTING STATE HANDLERS - * ***************************************************************************** */ - -static enum sci_status scic_sds_remote_device_starting_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - /* - * This device has not yet started so there had better be no IO requests - */ - BUG_ON(sci_dev->started_request_count != 0); - - /* - * Destroy the remote node context - */ - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); - - /* - * Transition to the stopping state and wait for the remote node to - * complete being posted and invalidated. - */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); - - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status = SCI_SUCCESS; - - /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); - - if (sci_dev->started_request_count == 0) { - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, - sci_dev); - } else - status = scic_sds_remote_device_terminate_requests(sci_dev); - - return status; -} - /** * * @device: The struct scic_sds_remote_device object which is cast to a @@ -832,32 +797,6 @@ static enum sci_status scic_sds_remote_device_ready_state_complete_request_handl return result; } -/* - * ***************************************************************************** - * * STOPPING STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @sci_dev: The struct scic_sds_remote_device which is cast into a - * struct scic_sds_remote_device. - * - * This method will stop a struct scic_sds_remote_device that is already in the - * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error - * since we allow a stop request on a device that is alreay stopping or - * stopped. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( - struct scic_sds_remote_device *device) -{ - /* - * All requests should have been terminated, but if there is an - * attempt to stop a device already in the stopping state, then - * try again to terminate. */ - return scic_sds_remote_device_terminate_requests(device); -} - - /** * * @device: The device object for which the request is completing. @@ -891,8 +830,7 @@ static enum sci_status scic_sds_remote_device_stopping_state_complete_request_ha if (scic_sds_remote_device_get_request_count(sci_dev) == 0) scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, - sci_dev); + rnc_destruct_done, sci_dev); return SCI_SUCCESS; } @@ -905,17 +843,6 @@ static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_han return SCI_SUCCESS; } -static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING - ); - - return SCI_SUCCESS; -} - /* complete requests for this device while it is in the * SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the complete * method for the request object and if that is successful the port object is @@ -1335,7 +1262,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .stop_handler = scic_sds_remote_device_default_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, @@ -1351,7 +1277,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, @@ -1367,7 +1292,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .stop_handler = scic_sds_remote_device_starting_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, @@ -1383,7 +1307,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, @@ -1399,7 +1322,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, @@ -1415,7 +1337,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, @@ -1431,7 +1352,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, @@ -1447,7 +1367,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, @@ -1463,7 +1382,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, @@ -1479,7 +1397,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, @@ -1495,7 +1412,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, @@ -1511,7 +1427,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, @@ -1527,7 +1442,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .stop_handler = scic_sds_remote_device_default_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, @@ -1543,7 +1457,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, @@ -1559,7 +1472,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .stop_handler = scic_sds_remote_device_default_stop_handler, .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index b778e0b..ca8c5d1 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The stop_handler specifies the method invoked when a user attempts to - * stop a remote device. - */ - scic_sds_remote_device_handler_t stop_handler; - - /** * The fail_handler specifies the method invoked when a remote device * failure has occurred. A failure may be due to an inability to * initialize/configure the device. -- cgit v0.10.2 From 1a6de2562b38e1e0e74c468554111ac54c062928 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 14:35:43 -0700 Subject: isci: kill remote_device fail_handler This is just unused infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index d779939..5141a92 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -434,12 +434,6 @@ default_device_handler(struct scic_sds_remote_device *sci_dev, return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_fail_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - static enum sci_status scic_sds_remote_device_default_destruct_handler( struct scic_sds_remote_device *sci_dev) { @@ -1262,7 +1256,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1277,7 +1270,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1292,7 +1284,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1307,7 +1298,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1322,7 +1312,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1337,7 +1326,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1352,7 +1340,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1367,7 +1354,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1382,7 +1368,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1397,7 +1382,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1412,7 +1396,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1427,7 +1410,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1442,7 +1424,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, @@ -1457,7 +1438,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, @@ -1472,7 +1452,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .fail_handler = scic_sds_remote_device_default_fail_handler, .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index ca8c5d1..dd8ac51 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,13 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The fail_handler specifies the method invoked when a remote device - * failure has occurred. A failure may be due to an inability to - * initialize/configure the device. - */ - scic_sds_remote_device_handler_t fail_handler; - - /** * The destruct_handler specifies the method invoked when attempting to * destruct a remote device. */ -- cgit v0.10.2 From b8d82f6cdd0f04ddfa877d8d886e56ebd8526d25 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 14:38:26 -0700 Subject: isci: unify remote_device destruct_handlers Implement all states in scic_remote_device_destruct() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 5141a92..dd66c0e 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -434,12 +434,6 @@ default_device_handler(struct scic_sds_remote_device *sci_dev, return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_destruct_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - static enum sci_status scic_sds_remote_device_default_reset_handler( struct scic_sds_remote_device *sci_dev) { @@ -661,33 +655,6 @@ static enum sci_status scic_sds_remote_device_general_event_handler( /** * - * @sci_dev: The struct scic_sds_remote_device which is cast into a - * struct scic_sds_remote_device. - * - * This method will destruct a struct scic_sds_remote_device that is in a stopped - * state. This is the only state from which a destruct request will succeed. - * The RNi for this struct scic_sds_remote_device is returned to the free pool and the - * device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( - struct scic_sds_remote_device *sci_dev) -{ - struct scic_sds_controller *scic; - - scic = scic_sds_remote_device_get_controller(sci_dev); - scic_sds_controller_free_remote_node_context(scic, sci_dev, - sci_dev->rnc.remote_node_index); - sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_FINAL); - - return SCI_SUCCESS; -} - -/** - * * @device: The struct scic_sds_remote_device object which is cast to a * struct scic_sds_remote_device object. * @@ -1256,7 +1223,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, @@ -1270,7 +1236,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, @@ -1284,7 +1249,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, @@ -1298,7 +1262,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, @@ -1312,7 +1275,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, @@ -1326,7 +1288,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, @@ -1340,7 +1301,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, @@ -1354,7 +1314,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, @@ -1368,7 +1327,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, @@ -1382,7 +1340,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, @@ -1396,7 +1353,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, @@ -1410,7 +1366,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, @@ -1424,7 +1379,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, @@ -1438,7 +1392,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, @@ -1452,7 +1405,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .destruct_handler = scic_sds_remote_device_default_destruct_handler, .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, @@ -1494,7 +1446,23 @@ static void scic_sds_remote_device_initial_state_enter(void *object) */ static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device *sci_dev) { - return sci_dev->state_handlers->destruct_handler(sci_dev); + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + struct scic_sds_controller *scic; + + if (state != SCI_BASE_REMOTE_DEVICE_STATE_STOPPED) { + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + scic = sci_dev->owning_port->owning_controller; + scic_sds_controller_free_remote_node_context(scic, sci_dev, + sci_dev->rnc.remote_node_index); + sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_FINAL); + + return SCI_SUCCESS; } /** diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index dd8ac51..d09e3f2 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a remote device. - */ - scic_sds_remote_device_handler_t destruct_handler; - - /** * The reset handler specifies the method invloked when requesting to * reset a remote device. */ -- cgit v0.10.2 From 4fd0d2e9bf5152456952ad7c5b6f3d8565de7737 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 14:48:54 -0700 Subject: isci: unify remote_device reset_handlers Implement all states in scic_remote_device_reset() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index dd66c0e..d8968f3 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -216,11 +216,34 @@ enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, } } - -enum sci_status scic_remote_device_reset( - struct scic_sds_remote_device *sci_dev) +enum sci_status scic_remote_device_reset(struct scic_sds_remote_device *sci_dev) { - return sci_dev->state_handlers->reset_handler(sci_dev); + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: + case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: + case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: + case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: + case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + default: + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_BASE_REMOTE_DEVICE_STATE_READY: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); + return SCI_SUCCESS; + } } @@ -434,12 +457,6 @@ default_device_handler(struct scic_sds_remote_device *sci_dev, return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_reset_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - static enum sci_status scic_sds_remote_device_default_reset_complete_handler( struct scic_sds_remote_device *sci_dev) { @@ -653,23 +670,6 @@ static enum sci_status scic_sds_remote_device_general_event_handler( true); } -/** - * - * @device: The struct scic_sds_remote_device object which is cast to a - * struct scic_sds_remote_device object. - * - * This is the ready state device reset handler enum sci_status - */ -static enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct scic_sds_remote_device *sci_dev) -{ - /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); - - return SCI_SUCCESS; -} - /* * This method will attempt to start a task request for this device object. The * remote device object will issue the start request for the task and if @@ -1223,7 +1223,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1236,7 +1235,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1249,7 +1247,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1262,7 +1259,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, @@ -1275,7 +1271,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1288,7 +1283,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, @@ -1301,7 +1295,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, @@ -1314,7 +1307,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, @@ -1327,7 +1319,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, @@ -1340,7 +1331,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1353,7 +1343,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, @@ -1366,7 +1355,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, @@ -1379,7 +1367,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1392,7 +1379,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, @@ -1405,7 +1391,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .reset_handler = scic_sds_remote_device_default_reset_handler, .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index d09e3f2..ab7a4c8 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The reset handler specifies the method invloked when requesting to - * reset a remote device. - */ - scic_sds_remote_device_handler_t reset_handler; - - /** * The reset complete handler specifies the method invloked when * reporting that a reset has completed to the remote device. */ -- cgit v0.10.2 From 815151826553f875846ebba9696777a424ee62e5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 14:53:00 -0700 Subject: isci: unify remote_device reset_complete_handlers Implement all states in scic_remote_device_reset_complete() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index d8968f3..658781d 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -246,15 +246,20 @@ enum sci_status scic_remote_device_reset(struct scic_sds_remote_device *sci_dev) } } - -enum sci_status scic_remote_device_reset_complete( - struct scic_sds_remote_device *sci_dev) +enum sci_status scic_remote_device_reset_complete(struct scic_sds_remote_device *sci_dev) { - return sci_dev->state_handlers->reset_complete_handler(sci_dev); -} + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + + if (state != SCI_BASE_REMOTE_DEVICE_STATE_RESETTING) { + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } -#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0) -#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES) + sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_READY); + return SCI_SUCCESS; +} /** * @@ -457,12 +462,6 @@ default_device_handler(struct scic_sds_remote_device *sci_dev, return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - static enum sci_status scic_sds_remote_device_default_suspend_handler( struct scic_sds_remote_device *sci_dev, u32 suspend_type) { @@ -795,15 +794,6 @@ static enum sci_status scic_sds_remote_device_stopping_state_complete_request_ha return SCI_SUCCESS; } -static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( - struct scic_sds_remote_device *sci_dev) -{ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY); - - return SCI_SUCCESS; -} - /* complete requests for this device while it is in the * SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the complete * method for the request object and if that is successful the port object is @@ -1223,7 +1213,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1235,7 +1224,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1247,7 +1235,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1259,7 +1246,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1271,7 +1257,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1283,7 +1268,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1295,7 +1279,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1307,7 +1290,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1319,7 +1301,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1331,7 +1312,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1343,7 +1323,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1355,7 +1334,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1367,7 +1345,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1379,7 +1356,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, @@ -1391,7 +1367,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index ab7a4c8..5109435 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The reset complete handler specifies the method invloked when - * reporting that a reset has completed to the remote device. - */ - scic_sds_remote_device_handler_t reset_complete_handler; - - /** * The start_io_handler specifies the method invoked when a user * attempts to start an IO request for a remote device. */ -- cgit v0.10.2 From 1860655706ee5a7e3f3adeebd4927fed98860462 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 14:57:11 -0700 Subject: isci: unify remote_device start_io_handlers Implement all states in scic_sds_remote_device_start_io() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 658781d..f4ba5be 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -305,22 +305,132 @@ enum sci_status scic_sds_remote_device_event_handler( return sci_dev->state_handlers->event_handler(sci_dev, event_code); } -/** - * - * @controller: The controller that is starting the io request. - * @sci_dev: The remote device for which the start io handling is being - * requested. - * @io_request: The io request that is being started. - * - * This method invokes the remote device start io handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_start_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) +static void scic_sds_remote_device_start_request(struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req, + enum sci_status status) { - return sci_dev->state_handlers->start_io_handler( - sci_dev, io_request); + struct scic_sds_port *sci_port = sci_dev->owning_port; + + /* cleanup requests that failed after starting on the port */ + if (status != SCI_SUCCESS) + scic_sds_port_complete_io(sci_port, sci_dev, sci_req); + else + scic_sds_remote_device_increment_request_count(sci_dev); +} + +enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + struct scic_sds_port *sci_port = sci_dev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: + case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: + case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: + case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: + case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + default: + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_BASE_REMOTE_DEVICE_STATE_READY: + /* attempt to start an io request for this device object. The remote + * device object will issue the start request for the io and if + * successful it will start the request for the port object then + * increment its own request count. + */ + status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + if (status != SCI_SUCCESS) + break; + + status = scic_sds_request_start(sci_req); + break; + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: { + /* handle the start io operation for a sata device that is in + * the command idle state. - Evalute the type of IO request to + * be started - If its an NCQ request change to NCQ substate - + * If its any other command change to the CMD substate + * + * If this is a softreset we may want to have a different + * substate. + */ + enum scic_sds_remote_device_states new_state; + + status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + if (status != SCI_SUCCESS) + break; + + status = sci_req->state_handlers->start_handler(sci_req); + if (status != SCI_SUCCESS) + break; + + if (isci_sata_get_sat_protocol(sci_req->ireq) == SAT_PROTOCOL_FPDMA) + new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ; + else { + sci_dev->working_request = sci_req; + new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD; + } + sci_base_state_machine_change_state(sm, new_state); + break; + } + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: + if (isci_sata_get_sat_protocol(sci_req->ireq) == SAT_PROTOCOL_FPDMA) { + status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + if (status != SCI_SUCCESS) + break; + + status = sci_req->state_handlers->start_handler(sci_req); + } else + return SCI_FAILURE_INVALID_STATE; + break; + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + if (status != SCI_SUCCESS) + break; + + status = scic_sds_request_start(sci_req); + if (status != SCI_SUCCESS) + break; + + sci_dev->working_request = sci_req; + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + break; + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + /* device is already handling a command it can not accept new commands + * until this one is complete. + */ + return SCI_FAILURE_INVALID_STATE; + } + + scic_sds_remote_device_start_request(sci_dev, sci_req, status); + return status; } /** @@ -411,32 +521,6 @@ static void remote_device_resume_done(void *_dev) /** * - * @device: This parameter specifies the device for which the request is being - * started. - * @request: This parameter specifies the request being started. - * @status: This parameter specifies the current start operation status. - * - * This method will perform the STP request start processing common to IO - * requests and task requests of all types. none - */ -static void scic_sds_remote_device_start_request( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req, - enum sci_status status) -{ - /* We still have a fault in starting the io complete it on the port */ - if (status == SCI_SUCCESS) - scic_sds_remote_device_increment_request_count(sci_dev); - else{ - sci_dev->owning_port->state_handlers->complete_io_handler( - sci_dev->owning_port, sci_dev, sci_req - ); - } -} - - -/** - * * @request: This parameter specifies the request being continued. * * This method will continue to post tc for a STP request. This method usually @@ -700,35 +784,6 @@ static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( } /* - * This method will attempt to start an io request for this device object. The - * remote device object will issue the start request for the io and if - * successful it will start the request for the port object then increment its - * own requet count. enum sci_status SCI_SUCCESS if the io request is started for - * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request - * object could not get the resources to start. - */ -static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - /* See if the port is in a state where we can start the IO request */ - result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(sci_dev), sci_dev, request); - - if (result == SCI_SUCCESS) { - result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (result == SCI_SUCCESS) - result = scic_sds_request_start(request); - - scic_sds_remote_device_start_request(sci_dev, request, result); - } - - return result; -} - -/* * This method will complete the request for the remote device object. The * method will call the completion handler for the request object and if * successful it will complete the request on the port object then decrement @@ -920,48 +975,6 @@ out: return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; } -/* handle the start io operation for a sata device that is in the command idle - * state. - Evalute the type of IO request to be started - If its an NCQ - * request change to NCQ substate - If its any other command change to the CMD - * substate - * - * If this is a softreset we may want to have a different substate. - */ -static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status; - struct isci_request *isci_request = request->ireq; - enum scic_sds_remote_device_states new_state; - - /* Will the port allow the io request to start? */ - status = sci_dev->owning_port->state_handlers->start_io_handler( - sci_dev->owning_port, sci_dev, request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (status != SCI_SUCCESS) - goto out; - - status = request->state_handlers->start_handler(request); - if (status != SCI_SUCCESS) - goto out; - - if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) - new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ; - else { - sci_dev->working_request = request; - new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD; - } - sci_base_state_machine_change_state(&sci_dev->state_machine, new_state); -out: - scic_sds_remote_device_start_request(sci_dev, request, status); - return status; -} - - static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code) @@ -982,31 +995,6 @@ static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_hand return status; } -static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status; - struct isci_request *isci_request = request->ireq; - scic_sds_port_io_request_handler_t start_io; - - if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) { - start_io = sci_dev->owning_port->state_handlers->start_io_handler; - status = start_io(sci_dev->owning_port, sci_dev, request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (status == SCI_SUCCESS) - status = request->state_handlers->start_handler(request); - - scic_sds_remote_device_start_request(sci_dev, request, status); - } else - status = SCI_FAILURE_INVALID_STATE; - - return status; -} - static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler(struct scic_sds_remote_device *sci_dev, u32 frame_index) { @@ -1046,16 +1034,6 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl return status; } -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - /* device is already handling a command it can not accept new commands - * until this one is complete. - */ - return SCI_FAILURE_INVALID_STATE; -} - static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( struct scic_sds_remote_device *sci_dev, u32 suspend_type) @@ -1080,13 +1058,6 @@ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handl frame_index); } -static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; -} - static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( struct scic_sds_remote_device *device, struct scic_sds_request *request) @@ -1126,46 +1097,6 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl isci_remote_device_ready(scic->ihost, idev); } -static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - enum sci_status status; - - /* Will the port allow the io request to start? */ - status = sci_dev->owning_port->state_handlers->start_io_handler( - sci_dev->owning_port, sci_dev, sci_req); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); - if (status != SCI_SUCCESS) - goto out; - - status = scic_sds_request_start(sci_req); - if (status != SCI_SUCCESS) - goto out; - - sci_dev->working_request = sci_req; - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - - out: - scic_sds_remote_device_start_request(sci_dev, sci_req, status); - - return status; -} - -static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - /* device is already handling a command it can not accept new commands - * until this one is complete. - */ - return SCI_FAILURE_INVALID_STATE; -} - static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler(struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) @@ -1213,7 +1144,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, @@ -1224,7 +1154,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, @@ -1235,7 +1164,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, @@ -1246,7 +1174,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, @@ -1257,7 +1184,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, @@ -1268,7 +1194,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, @@ -1279,7 +1204,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, @@ -1290,7 +1214,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, @@ -1301,7 +1224,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler, .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, @@ -1312,7 +1234,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, @@ -1323,7 +1244,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler, .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, @@ -1334,7 +1254,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, @@ -1345,7 +1264,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, @@ -1356,7 +1274,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, @@ -1367,7 +1284,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .start_io_handler = scic_sds_remote_device_default_start_request_handler, .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 5109435..58ce41a 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The start_io_handler specifies the method invoked when a user - * attempts to start an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t start_io_handler; - - /** * The complete_io_handler specifies the method invoked when a user * attempts to complete an IO request for a remote device. */ -- cgit v0.10.2 From 10a09e64be2580ceef8539629fb953b7d94fa35f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 15:33:43 -0700 Subject: isci: unify remote_device complete_io_handlers Implement all states in scic_sds_remote_device_complete_io() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index f4ba5be..a624767 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -433,22 +433,92 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic return status; } -/** - * - * @controller: The controller that is completing the io request. - * @sci_dev: The remote device for which the complete io handling is being - * requested. - * @io_request: The io request that is being completed. - * - * This method invokes the remote device complete io handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_complete_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) +static enum sci_status common_complete_io(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) { - return sci_dev->state_handlers->complete_io_handler( - sci_dev, io_request); + enum sci_status status; + + status = scic_sds_request_complete(sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_port_complete_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + return status; + + scic_sds_remote_device_decrement_request_count(sci_dev); + return status; +} + +enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + struct scic_sds_port *sci_port = sci_dev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: + case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: + case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + default: + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_BASE_REMOTE_DEVICE_STATE_READY: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: + status = common_complete_io(sci_port, sci_dev, sci_req); + break; + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + status = common_complete_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + break; + + if (sci_req->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* This request causes hardware error, device needs to be Lun Reset. + * So here we force the state machine to IDLE state so the rest IOs + * can reach RNC state handler, these IOs will be completed by RNC with + * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". + */ + sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET); + } else if (scic_sds_remote_device_get_request_count(sci_dev) == 0) + sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + break; + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + status = common_complete_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + break; + sci_base_state_machine_change_state(sm, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + break; + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: + status = common_complete_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + break; + + if (scic_sds_remote_device_get_request_count(sci_dev) == 0) + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + rnc_destruct_done, + sci_dev); + break; + } + + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(sci_dev), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", __func__, sci_port, + sci_dev, sci_req, status); + + return status; } /** @@ -1058,32 +1128,6 @@ static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handl frame_index); } -static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - struct scic_sds_request *sci_req = request; - enum sci_status status; - - status = scic_sds_io_request_complete(sci_req); - if (status != SCI_SUCCESS) - goto out; - - status = scic_sds_port_complete_io(device->owning_port, device, sci_req); - if (status != SCI_SUCCESS) - goto out; - - scic_sds_remote_device_decrement_request_count(device); - out: - if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(device), - "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " - "could not complete\n", - __func__, device->owning_port, device, sci_req, status); - - return status; -} - static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) { struct scic_sds_remote_device *sci_dev = _dev; @@ -1097,33 +1141,6 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl isci_remote_device_ready(scic->ihost, idev); } -static enum sci_status -scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler(struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - enum sci_status status; - - status = scic_sds_io_request_complete(sci_req); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req); - if (status != SCI_SUCCESS) { - dev_err(scirdev_to_dev(sci_dev), - "%s: SCIC SDS Remote Device 0x%p io request " - "0x%p could not be completd on the port 0x%p " - "failed with status %d.\n", __func__, sci_dev, sci_req, - sci_dev->owning_port, status); - return status; - } - - scic_sds_remote_device_decrement_request_count(sci_dev); - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - - return status; -} - static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) @@ -1144,7 +1161,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1154,7 +1170,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1164,7 +1179,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1174,7 +1188,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, @@ -1184,7 +1197,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1194,7 +1206,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, @@ -1204,7 +1215,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, @@ -1214,7 +1224,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .complete_io_handler = scic_sds_stp_remote_device_complete_request, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, @@ -1224,7 +1233,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, @@ -1234,7 +1242,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1244,7 +1251,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1254,7 +1260,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, @@ -1264,7 +1269,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, @@ -1274,7 +1278,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, @@ -1284,7 +1287,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 58ce41a..6476765 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The complete_io_handler specifies the method invoked when a user - * attempts to complete an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t complete_io_handler; - - /** * The continue_io_handler specifies the method invoked when a user * attempts to continue an IO request for a remote device. */ -- cgit v0.10.2 From c027a20bf3fa831fed70b1662e526be04447ab07 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 15:46:18 -0700 Subject: isci: kill remote_device continue_io_handler This is unused infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index a624767..3580c0a 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -751,13 +751,6 @@ static enum sci_status scic_sds_remote_device_default_complete_request_handler( return default_device_handler(sci_dev, __func__); } -static enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - /** * * @device: The struct scic_sds_remote_device which is then cast into a @@ -1161,7 +1154,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1170,7 +1162,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1179,7 +1170,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1188,7 +1178,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1197,7 +1186,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1206,7 +1194,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, @@ -1215,7 +1202,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1224,7 +1210,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1233,7 +1218,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1242,7 +1226,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1251,7 +1234,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1260,7 +1242,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1269,7 +1250,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1278,7 +1258,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, @@ -1287,7 +1266,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 6476765..04a2b54 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The continue_io_handler specifies the method invoked when a user - * attempts to continue an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t continue_io_handler; - - /** * The start_task_handler specifies the method invoked when a user * attempts to start a task management request for a remote device. */ -- cgit v0.10.2 From 84b9b029bc4121c43294e27aeaa0350a6d07450c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 15:53:25 -0700 Subject: isci: unify remote_device start_task_handlers Implement all states in scic_sds_remote_device_start_task() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 3580c0a..3e7e952 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -521,22 +521,97 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s return status; } -/** - * - * @controller: The controller that is starting the task request. - * @sci_dev: The remote device for which the start task handling is being - * requested. - * @io_request: The task request that is being started. - * - * This method invokes the remote device start task handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_start_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) +static void scic_sds_remote_device_continue_request(void *dev) +{ + struct scic_sds_remote_device *sci_dev = dev; + + /* we need to check if this request is still valid to continue. */ + if (sci_dev->working_request) + scic_controller_continue_io(sci_dev->working_request); +} + +enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) { - return sci_dev->state_handlers->start_task_handler( - sci_dev, io_request); + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + struct scic_sds_port *sci_port = sci_dev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: + case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: + case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: + case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: + case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + default: + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_task(&sci_dev->rnc, sci_req); + if (status != SCI_SUCCESS) + goto out; + + status = sci_req->state_handlers->start_handler(sci_req); + if (status != SCI_SUCCESS) + goto out; + + /* Note: If the remote device state is not IDLE this will + * replace the request that probably resulted in the task + * management request. + */ + sci_dev->working_request = sci_req; + sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + + /* The remote node context must cleanup the TCi to NCQ mapping + * table. The only way to do this correctly is to either write + * to the TLCR register or to invalidate and repost the RNC. In + * either case the remote node context state machine will take + * the correct action when the remote node context is suspended + * and later resumed. + */ + scic_sds_remote_node_context_suspend(&sci_dev->rnc, + SCI_SOFTWARE_SUSPENSION, NULL, NULL); + scic_sds_remote_node_context_resume(&sci_dev->rnc, + scic_sds_remote_device_continue_request, + sci_dev); + + out: + scic_sds_remote_device_start_request(sci_dev, sci_req, status); + /* We need to let the controller start request handler know that + * it can't post TC yet. We will provide a callback function to + * post TC when RNC gets resumed. + */ + return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; + case SCI_BASE_REMOTE_DEVICE_STATE_READY: + status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_remote_node_context_start_task(&sci_dev->rnc, sci_req); + if (status != SCI_SUCCESS) + break; + + status = scic_sds_request_start(sci_req); + break; + } + scic_sds_remote_device_start_request(sci_dev, sci_req, status); + + return status; } /** @@ -589,23 +664,6 @@ static void remote_device_resume_done(void *_dev) } } -/** - * - * @request: This parameter specifies the request being continued. - * - * This method will continue to post tc for a STP request. This method usually - * serves as a callback when RNC gets resumed during a task management - * sequence. none - */ -static void scic_sds_remote_device_continue_request(void *dev) -{ - struct scic_sds_remote_device *sci_dev = dev; - - /* we need to check if this request is still valid to continue. */ - if (sci_dev->working_request) - scic_controller_continue_io(sci_dev->working_request); -} - static enum sci_status default_device_handler(struct scic_sds_remote_device *sci_dev, const char *func) @@ -737,13 +795,6 @@ static enum sci_status scic_sds_remote_device_default_frame_handler( return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_start_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - static enum sci_status scic_sds_remote_device_default_complete_request_handler( struct scic_sds_remote_device *sci_dev, struct scic_sds_request *request) @@ -817,36 +868,6 @@ static enum sci_status scic_sds_remote_device_general_event_handler( } /* - * This method will attempt to start a task request for this device object. The - * remote device object will issue the start request for the task and if - * successful it will start the request for the port object then increment its - * own requet count. enum sci_status SCI_SUCCESS if the task request is started for - * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request - * object could not get the resources to start. - */ -static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - /* See if the port is in a state where we can start the IO request */ - result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(sci_dev), sci_dev, request); - - if (result == SCI_SUCCESS) { - result = scic_sds_remote_node_context_start_task(&sci_dev->rnc, - request); - if (result == SCI_SUCCESS) - result = scic_sds_request_start(request); - - scic_sds_remote_device_start_request(sci_dev, request, result); - } - - return result; -} - -/* * This method will complete the request for the remote device object. The * method will call the completion handler for the request object and if * successful it will complete the request on the port object then decrement @@ -976,68 +997,6 @@ static enum sci_status scic_sds_stp_remote_device_complete_request(struct scic_s return status; } -/* scic_sds_stp_remote_device_ready_substate_start_request_handler - start stp - * @device: The target device a task management request towards to. - * @request: The task request. - * - * This is the READY NCQ substate handler to start task management request. In - * this routine, we suspend and resume the RNC. enum sci_status Always return - * SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to let - * controller_start_task_handler know that the controller can't post TC for - * task request yet, instead, when RNC gets resumed, a controller_continue_task - * callback will be called. - */ -static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request) -{ - enum sci_status status; - - /* Will the port allow the io request to start? */ - status = device->owning_port->state_handlers->start_io_handler( - device->owning_port, device, request); - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_remote_node_context_start_task(&device->rnc, request); - if (status != SCI_SUCCESS) - goto out; - - status = request->state_handlers->start_handler(request); - if (status != SCI_SUCCESS) - goto out; - - /* - * Note: If the remote device state is not IDLE this will replace - * the request that probably resulted in the task management request. - */ - device->working_request = request; - sci_base_state_machine_change_state(&device->state_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - - /* - * The remote node context must cleanup the TCi to NCQ mapping table. - * The only way to do this correctly is to either write to the TLCR - * register or to invalidate and repost the RNC. In either case the - * remote node context state machine will take the correct action when - * the remote node context is suspended and later resumed. - */ - scic_sds_remote_node_context_suspend(&device->rnc, - SCI_SOFTWARE_SUSPENSION, NULL, NULL); - scic_sds_remote_node_context_resume(&device->rnc, - scic_sds_remote_device_continue_request, - device); - -out: - scic_sds_remote_device_start_request(device, request, status); - /* - * We need to let the controller start request handler know that it can't - * post TC yet. We will provide a callback function to post TC when RNC gets - * resumed. - */ - return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; -} - static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code) @@ -1154,7 +1113,6 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1162,7 +1120,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1170,7 +1127,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1178,7 +1134,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1186,7 +1141,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1194,7 +1148,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1202,7 +1155,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1210,7 +1162,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1218,7 +1169,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler, .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1226,7 +1176,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1234,7 +1183,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1242,7 +1190,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1250,7 +1197,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1258,7 +1204,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, @@ -1266,7 +1211,6 @@ static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_ .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .start_task_handler = scic_sds_remote_device_default_start_request_handler, .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 04a2b54..fb2b007 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -387,12 +387,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( */ struct scic_sds_remote_device_state_handler { /** - * The start_task_handler specifies the method invoked when a user - * attempts to start a task management request for a remote device. - */ - scic_sds_remote_device_request_handler_t start_task_handler; - - /** * The complete_task_handler specifies the method invoked when a user * attempts to complete a task management request for a remote device. */ -- cgit v0.10.2 From e4a867bb4a7617dc1067e1c41627782f3c6c284c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 16:01:05 -0700 Subject: isci: kill remote_device complete_task_handler This is unused infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 3e7e952..3344f38 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -795,13 +795,6 @@ static enum sci_status scic_sds_remote_device_default_frame_handler( return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - /** * * @device: The struct scic_sds_remote_device which is then cast into a @@ -867,136 +860,6 @@ static enum sci_status scic_sds_remote_device_general_event_handler( true); } -/* - * This method will complete the request for the remote device object. The - * method will call the completion handler for the request object and if - * successful it will complete the request on the port object then decrement - * its own started_request_count. enum sci_status - */ -static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - result = scic_sds_request_complete(request); - - if (result != SCI_SUCCESS) - return result; - - /* See if the port is in a state - * where we can start the IO request */ - result = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - - if (result == SCI_SUCCESS) - scic_sds_remote_device_decrement_request_count(sci_dev); - - return result; -} - -/** - * - * @device: The device object for which the request is completing. - * @request: The task request that is being completed. - * - * This method completes requests for this struct scic_sds_remote_device while it is - * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the - * complete method for the request object and if that is successful the port - * object is called to complete the task request. Then the device object itself - * completes the task request. If struct scic_sds_remote_device started_request_count - * goes to 0 and the invalidate RNC request has completed the device object can - * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status - */ -static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status = SCI_SUCCESS; - - status = scic_sds_request_complete(request); - - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - if (status != SCI_SUCCESS) - return status; - - scic_sds_remote_device_decrement_request_count(sci_dev); - - if (scic_sds_remote_device_get_request_count(sci_dev) == 0) - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - rnc_destruct_done, sci_dev); - return SCI_SUCCESS; -} - -/* complete requests for this device while it is in the - * SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the complete - * method for the request object and if that is successful the port object is - * called to complete the task request. Then the device object itself completes - * the task request. enum sci_status - */ -static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status = SCI_SUCCESS; - - status = scic_sds_request_complete(request); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - - if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(sci_dev); - } - } - - return status; -} - -static enum sci_status scic_sds_stp_remote_device_complete_request(struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - enum sci_status status; - - status = scic_sds_io_request_complete(sci_req); - if (status != SCI_SUCCESS) - goto out; - - status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req); - if (status != SCI_SUCCESS) - goto out; - - scic_sds_remote_device_decrement_request_count(sci_dev); - if (sci_req->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - /* This request causes hardware error, device needs to be Lun Reset. - * So here we force the state machine to IDLE state so the rest IOs - * can reach RNC state handler, these IOs will be completed by RNC with - * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". - */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET); - } else if (scic_sds_remote_device_get_request_count(sci_dev) == 0) - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - - - out: - if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(sci_dev), - "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " - "could not complete\n", __func__, sci_dev->owning_port, - sci_dev, sci_req, status); - - return status; -} - static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( struct scic_sds_remote_device *sci_dev, u32 event_code) @@ -1113,105 +976,90 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .complete_task_handler = scic_sds_stp_remote_device_complete_request, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index fb2b007..dbfb13e 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -386,13 +386,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( * */ struct scic_sds_remote_device_state_handler { - /** - * The complete_task_handler specifies the method invoked when a user - * attempts to complete a task management request for a remote device. - */ - scic_sds_remote_device_request_handler_t complete_task_handler; - - scic_sds_remote_device_suspend_handler_t suspend_handler; scic_sds_remote_device_resume_handler_t resume_handler; scic_sds_remote_device_event_handler_t event_handler; -- cgit v0.10.2 From 323f0ec0fc72670f71210ba89611f6a1ec234394 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 16:15:47 -0700 Subject: isci: unify remote_device suspend_handlers Implement all states in scic_sds_remote_device_suspend() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 3344f38..97ea874 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -261,17 +261,20 @@ enum sci_status scic_remote_device_reset_complete(struct scic_sds_remote_device return SCI_SUCCESS; } -/** - * - * @sci_dev: The remote device for which the suspend is being requested. - * - * This method invokes the remote device suspend state handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_suspend( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type) +enum sci_status scic_sds_remote_device_suspend(struct scic_sds_remote_device *sci_dev, + u32 suspend_type) { - return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type); + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + + if (state != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD) { + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + return scic_sds_remote_node_context_suspend(&sci_dev->rnc, + suspend_type, NULL, NULL); } /** @@ -674,12 +677,6 @@ default_device_handler(struct scic_sds_remote_device *sci_dev, return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_device_default_suspend_handler( - struct scic_sds_remote_device *sci_dev, u32 suspend_type) -{ - return default_device_handler(sci_dev, __func__); -} - static enum sci_status scic_sds_remote_device_default_resume_handler( struct scic_sds_remote_device *sci_dev) { @@ -919,18 +916,6 @@ static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handl return status; } -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type) -{ - enum sci_status status; - - status = scic_sds_remote_node_context_suspend(&sci_dev->rnc, - suspend_type, NULL, NULL); - - return status; -} - static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( struct scic_sds_remote_device *sci_dev, u32 frame_index) @@ -976,91 +961,76 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .suspend_handler = scic_sds_remote_device_default_suspend_handler, .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index dbfb13e..f0cabd0 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -386,7 +386,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( * */ struct scic_sds_remote_device_state_handler { - scic_sds_remote_device_suspend_handler_t suspend_handler; scic_sds_remote_device_resume_handler_t resume_handler; scic_sds_remote_device_event_handler_t event_handler; scic_sds_remote_device_frame_handler_t frame_handler; -- cgit v0.10.2 From 978edfef46415badd28974a3e85119e2b764d236 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 16:20:54 -0700 Subject: isci: kill remote_device resume_handler This is unused infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 97ea874..26c5253 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -667,22 +667,6 @@ static void remote_device_resume_done(void *_dev) } } -static enum sci_status -default_device_handler(struct scic_sds_remote_device *sci_dev, - const char *func) -{ - dev_warn(scirdev_to_dev(sci_dev), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&sci_dev->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_remote_device_default_resume_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - /** * * @device: The struct scic_sds_remote_device which is then cast into a @@ -961,77 +945,62 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .resume_handler = scic_sds_remote_device_default_resume_handler, .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler } diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index f0cabd0..bb8d173 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -386,7 +386,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( * */ struct scic_sds_remote_device_state_handler { - scic_sds_remote_device_resume_handler_t resume_handler; scic_sds_remote_device_event_handler_t event_handler; scic_sds_remote_device_frame_handler_t frame_handler; }; -- cgit v0.10.2 From e622571f0f05986b23eba566b73b3abeb5d847d3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 16:26:09 -0700 Subject: isci: unify remote_device event_handlers Implement all states in scic_sds_remote_device_event() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 26c5253..53f4ecf 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -293,19 +293,84 @@ enum sci_status scic_sds_remote_device_frame_handler( return sci_dev->state_handlers->frame_handler(sci_dev, frame_index); } -/** - * - * @sci_dev: The remote device for which the event handling is being - * requested. - * @event_code: This is the event code that is to be processed. - * - * This method invokes the remote device event handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) +static bool is_remote_device_ready(struct scic_sds_remote_device *sci_dev) { - return sci_dev->state_handlers->event_handler(sci_dev, event_code); + + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_BASE_REMOTE_DEVICE_STATE_READY: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + return true; + default: + return false; + } +} + +enum sci_status scic_sds_remote_device_event_handler(struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_OPS_MISC: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); + break; + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { + status = SCI_SUCCESS; + + /* Suspend the associated RNC */ + scic_sds_remote_node_context_suspend(&sci_dev->rnc, + SCI_SOFTWARE_SUSPENSION, + NULL, NULL); + + dev_dbg(scirdev_to_dev(sci_dev), + "%s: device: %p event code: %x: %s\n", + __func__, sci_dev, event_code, + is_remote_device_ready(sci_dev) + ? "I_T_Nexus_Timeout event" + : "I_T_Nexus_Timeout event in wrong state"); + + break; + } + /* Else, fall through and treat as unhandled... */ + default: + dev_dbg(scirdev_to_dev(sci_dev), + "%s: device: %p event code: %x: %s\n", + __func__, sci_dev, event_code, + is_remote_device_ready(sci_dev) + ? "unexpected event" + : "unexpected event in wrong state"); + status = SCI_FAILURE_INVALID_STATE; + break; + } + + if (status != SCI_SUCCESS) + return status; + + if (state == SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE) { + + /* We pick up suspension events to handle specifically to this + * state. We resume the RNC right away. + */ + if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || + scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) + status = scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); + } + + return status; } static void scic_sds_remote_device_start_request(struct scic_sds_remote_device *sci_dev, @@ -646,103 +711,13 @@ void scic_sds_remote_device_post_request( static void remote_device_resume_done(void *_dev) { struct scic_sds_remote_device *sci_dev = _dev; - enum scic_sds_remote_device_states state; - state = sci_dev->state_machine.current_state_id; - switch (state) { - case SCI_BASE_REMOTE_DEVICE_STATE_READY: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - break; - default: - /* go 'ready' if we are not already in a ready state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY); - break; - } -} + if (is_remote_device_ready(sci_dev)) + return; -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @event_code: The event code that the struct scic_sds_controller wants the device - * object to process. - * - * This method is the default event handler. It will call the RNC state - * machine handler for any RNC events otherwise it will log a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_core_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code, - bool is_ready_state) -{ - enum sci_status status; - - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TYPE_RNC_OPS_MISC: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); - break; - case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: - - if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { - status = SCI_SUCCESS; - - /* Suspend the associated RNC */ - scic_sds_remote_node_context_suspend(&sci_dev->rnc, - SCI_SOFTWARE_SUSPENSION, - NULL, NULL); - - dev_dbg(scirdev_to_dev(sci_dev), - "%s: device: %p event code: %x: %s\n", - __func__, sci_dev, event_code, - (is_ready_state) - ? "I_T_Nexus_Timeout event" - : "I_T_Nexus_Timeout event in wrong state"); - - break; - } - /* Else, fall through and treat as unhandled... */ - - default: - dev_dbg(scirdev_to_dev(sci_dev), - "%s: device: %p event code: %x: %s\n", - __func__, sci_dev, event_code, - (is_ready_state) - ? "unexpected event" - : "unexpected event in wrong state"); - status = SCI_FAILURE_INVALID_STATE; - break; - } - - return status; -} -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @event_code: The event code that the struct scic_sds_controller wants the device - * object to process. - * - * This method is the default event handler. It will call the RNC state - * machine handler for any RNC events otherwise it will log a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_default_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - return scic_sds_remote_device_core_event_handler(sci_dev, - event_code, - false); + /* go 'ready' if we are not already in a ready state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY); } /** @@ -824,43 +799,6 @@ static enum sci_status scic_sds_remote_device_general_frame_handler( return result; } -/** - * - * @[in]: sci_dev This is the device object that is receiving the event. - * @[in]: event_code The event code to process. - * - * This is a common method for handling events reported to the remote device - * from the controller object. enum sci_status - */ -static enum sci_status scic_sds_remote_device_general_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - return scic_sds_remote_device_core_event_handler(sci_dev, - event_code, - true); -} - -static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - enum sci_status status; - - status = scic_sds_remote_device_general_event_handler(sci_dev, event_code); - if (status != SCI_SUCCESS) - return status; - - /* We pick up suspension events to handle specifically to this state. We - * resume the RNC right away. enum sci_status - */ - if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || - scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) - status = scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); - - return status; -} - static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler(struct scic_sds_remote_device *sci_dev, u32 frame_index) { @@ -945,63 +883,48 @@ static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handl static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .event_handler = scic_sds_remote_device_general_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .event_handler = scic_sds_remote_device_default_event_handler, .frame_handler = scic_sds_remote_device_default_frame_handler } }; diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index bb8d173..e376ec2 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -386,7 +386,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( * */ struct scic_sds_remote_device_state_handler { - scic_sds_remote_device_event_handler_t event_handler; scic_sds_remote_device_frame_handler_t frame_handler; }; -- cgit v0.10.2 From 01bec7788db9d1bb2c594d1f1916096ce6299f38 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 16:51:11 -0700 Subject: isci: unify remote_device frame_handlers Implement all states in scic_sds_remote_device_frame() and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 53f4ecf..0295349 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -277,20 +277,96 @@ enum sci_status scic_sds_remote_device_suspend(struct scic_sds_remote_device *sc suspend_type, NULL, NULL); } -/** - * - * @sci_dev: The remote device for which the event handling is being - * requested. - * @frame_index: This is the frame index that is being processed. - * - * This method invokes the frame handler for the remote device state machine - * enum sci_status - */ -enum sci_status scic_sds_remote_device_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) +enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_device *sci_dev, + u32 frame_index) { - return sci_dev->state_handlers->frame_handler(sci_dev, frame_index); + struct sci_base_state_machine *sm = &sci_dev->state_machine; + enum scic_sds_remote_device_states state = sm->current_state_id; + struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + enum sci_status status; + + switch (state) { + case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: + case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + default: + dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + __func__, state); + /* Return the frame back to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + return SCI_FAILURE_INVALID_STATE; + case SCI_BASE_REMOTE_DEVICE_STATE_READY: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: + case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: + case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: { + struct scic_sds_request *sci_req; + struct sci_ssp_frame_header *hdr; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&hdr); + if (status != SCI_SUCCESS) + return status; + + sci_req = scic_sds_controller_get_io_request_from_tag(scic, hdr->tag); + if (sci_req && sci_req->target_device == sci_dev) { + /* The IO request is now in charge of releasing the frame */ + status = sci_req->state_handlers->frame_handler(sci_req, + frame_index); + } else { + /* We could not map this tag to a valid IO + * request Just toss the frame and continue + */ + scic_sds_controller_release_frame(scic, frame_index); + } + break; + } + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: { + struct sata_fis_header *hdr; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&hdr); + if (status != SCI_SUCCESS) + return status; + + if (hdr->fis_type == SATA_FIS_TYPE_SETDEVBITS && + (hdr->status & ATA_STATUS_REG_ERROR_BIT)) { + sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + /* TODO Check sactive and complete associated IO if any. */ + sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + } else if (hdr->fis_type == SATA_FIS_TYPE_REGD2H && + (hdr->status & ATA_STATUS_REG_ERROR_BIT)) { + /* + * Some devices return D2H FIS when an NCQ error is detected. + * Treat this like an SDB error FIS ready reason. + */ + sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + } else + status = SCI_FAILURE; + + scic_sds_controller_release_frame(scic, frame_index); + break; + } + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + /* The device does not process any UF received from the hardware while + * in this state. All unsolicited frames are forwarded to the io request + * object. + */ + status = scic_sds_io_request_frame_handler(sci_dev->working_request, frame_index); + break; + } + + return status; } static bool is_remote_device_ready(struct scic_sds_remote_device *sci_dev) @@ -720,136 +796,6 @@ static void remote_device_resume_done(void *_dev) SCI_BASE_REMOTE_DEVICE_STATE_READY); } -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @frame_index: The frame index for which the struct scic_sds_controller wants this - * device object to process. - * - * This method is the default unsolicited frame handler. It logs a warning, - * releases the frame and returns a failure. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_default_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - dev_warn(scirdev_to_dev(sci_dev), - "%s: SCIC Remote Device requested to handle frame %x " - "while in wrong state %d\n", - __func__, - frame_index, - sci_base_state_machine_get_state( - &sci_dev->state_machine)); - - /* Return the frame back to the controller */ - scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(sci_dev), frame_index - ); - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @frame_index: The frame index for which the struct scic_sds_controller wants this - * device object to process. - * - * This method is a general ssp frame handler. In most cases the device object - * needs to route the unsolicited frame processing to the io request object. - * This method decodes the tag for the io request object and routes the - * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_general_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status result; - struct sci_ssp_frame_header *frame_header; - struct scic_sds_request *io_request; - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), - frame_index, - (void **)&frame_header - ); - - if (SCI_SUCCESS == result) { - io_request = scic_sds_controller_get_io_request_from_tag( - scic_sds_remote_device_get_controller(sci_dev), frame_header->tag); - - if ((io_request == NULL) - || (io_request->target_device != sci_dev)) { - /* - * We could not map this tag to a valid IO request - * Just toss the frame and continue */ - scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(sci_dev), frame_index - ); - } else { - /* The IO request is now in charge of releasing the frame */ - result = io_request->state_handlers->frame_handler( - io_request, frame_index); - } - } - - return result; -} - -static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler(struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status status; - struct sata_fis_header *frame_header; - struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - if (status != SCI_SUCCESS) - return status; - - if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS && - (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { - sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; - - /* TODO Check sactive and complete associated IO if any. */ - - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); - } else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H && - (frame_header->status & ATA_STATUS_REG_ERROR_BIT)) { - /* - * Some devices return D2H FIS when an NCQ error is detected. - * Treat this like an SDB error FIS ready reason. - */ - sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; - - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); - } else - status = SCI_FAILURE; - - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - /* The device doe not process any UF received from the hardware while - * in this state. All unsolicited frames are forwarded to the io - * request object. - */ - return scic_sds_io_request_frame_handler(sci_dev->working_request, - frame_index); -} - static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) { struct scic_sds_remote_device *sci_dev = _dev; @@ -863,69 +809,36 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl isci_remote_device_ready(scic->ihost, idev); } -static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status status; - - /* The device does not process any UF received from the hardware while - * in this state. All unsolicited frames are forwarded to the io request - * object. - */ - status = scic_sds_io_request_frame_handler( - sci_dev->working_request, - frame_index - ); - - return status; -} - static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .frame_handler = scic_sds_remote_device_general_frame_handler, }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - .frame_handler = scic_sds_remote_device_default_frame_handler }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - .frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .frame_handler = scic_sds_remote_device_general_frame_handler }, [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .frame_handler = scic_sds_remote_device_default_frame_handler } }; diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index e376ec2..1577b12 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -386,7 +386,6 @@ typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( * */ struct scic_sds_remote_device_state_handler { - scic_sds_remote_device_frame_handler_t frame_handler; }; /** -- cgit v0.10.2 From 971cc2ff90875a4ca28b7da5b91a408cc8151fdc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 1 May 2011 16:58:46 -0700 Subject: isci: kill scic_sds_remote_device.state_handlers Remove the now unused state_handler infrastructure for remote_devices. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 0295349..a23ebe8 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -809,46 +809,10 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl isci_remote_device_ready(scic->ihost, idev); } -static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { - [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - }, - [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { - }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - }, - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { - }, - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - }, - [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - } -}; - static void scic_sds_remote_device_initial_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); - /* Initial state is a transitional state to the stopped state */ sci_base_state_machine_change_state(&sci_dev->state_machine, SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); @@ -953,9 +917,6 @@ static void scic_sds_remote_device_stopped_state_enter(void *object) ihost = scic->ihost; idev = sci_dev_to_idev(sci_dev); - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); - /* If we are entering from the stopping state let the SCI User know that * the stop operation has completed. */ @@ -973,9 +934,6 @@ static void scic_sds_remote_device_starting_state_enter(void *object) struct isci_host *ihost = scic->ihost; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STARTING); - isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); } @@ -986,10 +944,6 @@ static void scic_sds_remote_device_ready_state_enter(void *object) struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct domain_device *dev = sci_dev_to_domain(sci_dev); - SET_STATE_HANDLER(sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_READY); - scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { @@ -1016,38 +970,10 @@ static void scic_sds_remote_device_ready_state_exit(void *object) } } -static void scic_sds_remote_device_stopping_state_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING - ); -} - -static void scic_sds_remote_device_failed_state_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_FAILED - ); -} - static void scic_sds_remote_device_resetting_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING - ); - scic_sds_remote_node_context_suspend( &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); } @@ -1059,24 +985,10 @@ static void scic_sds_remote_device_resetting_state_exit(void *object) scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); } -static void scic_sds_remote_device_final_state_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_FINAL - ); -} - static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - sci_dev->working_request = NULL; if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { /* @@ -1097,51 +1009,26 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) BUG_ON(sci_dev->working_request == NULL); - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev), SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } -static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ); -} - static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); - if (sci_dev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) isci_remote_device_not_ready(scic->ihost, idev, sci_dev->not_ready_reason); } -static void scic_sds_stp_remote_device_ready_await_reset_substate_enter(void *object) -{ - struct scic_sds_remote_device *sci_dev = object; - - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET); -} - static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev)); } @@ -1152,9 +1039,6 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) BUG_ON(sci_dev->working_request == NULL); - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); - isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev), SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } @@ -1186,15 +1070,11 @@ static const struct sci_base_state scic_sds_remote_device_state_table[] = { [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { - .enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter, - }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { }, [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { - .enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter, - }, + [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { }, [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, }, @@ -1202,19 +1082,13 @@ static const struct sci_base_state scic_sds_remote_device_state_table[] = { .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .enter_state = scic_sds_remote_device_stopping_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .enter_state = scic_sds_remote_device_failed_state_enter, - }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { }, + [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { }, [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { .enter_state = scic_sds_remote_device_resetting_state_enter, .exit_state = scic_sds_remote_device_resetting_state_exit }, - [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .enter_state = scic_sds_remote_device_final_state_enter, - }, + [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { }, }; /** diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 1577b12..18f7f96 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -128,12 +128,6 @@ struct scic_sds_remote_device { * assigned in the state handlers and used in the state transition. */ u32 not_ready_reason; - - /** - * This field maintains the set of state handlers for the remote device - * object. These are changed each time the remote device enters a new state. - */ - const struct scic_sds_remote_device_state_handler *state_handlers; }; struct isci_remote_device { @@ -347,47 +341,6 @@ static inline bool dev_is_expander(struct domain_device *dev) return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; } -typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_handler_t)( - struct scic_sds_remote_device *device, - struct scic_sds_request *request, - void *, - enum sci_io_status); - -typedef enum sci_status (*scic_sds_remote_device_handler_t)( - struct scic_sds_remote_device *sci_dev); - -typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type); - -typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)( - struct scic_sds_remote_device *sci_dev); - -typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -typedef enum sci_status (*scic_sds_remote_device_event_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 event_code); - -typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( - struct scic_sds_remote_device *sci_dev); - -/** - * struct scic_sds_remote_device_state_handler - This structure conains the - * state handlers that are needed to process requests for the SCU remote - * device objects. - * - * - */ -struct scic_sds_remote_device_state_handler { -}; - /** * scic_sds_remote_device_increment_request_count() - * @@ -431,15 +384,6 @@ struct scic_sds_remote_device_state_handler { scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev)) /** - * scic_sds_remote_device_set_state_handlers() - - * - * This macro sets the remote device state handlers pointer and is set on entry - * to each device state. - */ -#define scic_sds_remote_device_set_state_handlers(sci_dev, handlers) \ - ((sci_dev)->state_handlers = (handlers)) - -/** * scic_sds_remote_device_get_port() - * * This macro returns the owning port of this device -- cgit v0.10.2 From d6f6404c038b004fdb93f0676db934d69c524f7e Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 22 Apr 2011 06:39:48 +0000 Subject: isci: Removing unused define SCIC_SDS_4_ENABLED Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index c27d259..78ba0fc 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -1,7 +1,3 @@ -#TODO kill SCIC_SDS_4_ENABLED it is always true for this -#generation of silicon -EXTRA_CFLAGS += -DSCIC_SDS_4_ENABLED - EXTRA_CFLAGS += -Idrivers/scsi/isci/core/ -Idrivers/scsi/isci/ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index b57f39c..c12e6d4 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -151,7 +151,6 @@ struct sci_sas_identify_address_frame { */ struct sas_capabilities { union { -#if defined (SCIC_SDS_4_ENABLED) struct { /** * The SAS specification indicates the start bit shall always be set to @@ -172,7 +171,6 @@ struct sas_capabilities { u32 reserved2:17; u32 parity:1; } bits; -#endif /* (SCIC_SDS_4_ENABLED) */ u32 all; } u; diff --git a/drivers/scsi/isci/core/sci_controller_constants.h b/drivers/scsi/isci/core/sci_controller_constants.h index 06c34c7..2525c26 100644 --- a/drivers/scsi/isci/core/sci_controller_constants.h +++ b/drivers/scsi/isci/core/sci_controller_constants.h @@ -65,9 +65,6 @@ * */ - -#ifdef SCIC_SDS_4_ENABLED - #ifndef SCI_MAX_PHYS /** * @@ -188,12 +185,6 @@ #define SCI_MIN_SCATTER_GATHER_ELEMENTS 1 #endif -#else /* SCIC_SDS_4_ENABLED */ - -#error "SCI Core configuration left unspecified (e.g. SCIC_SDS_4_ENABLED)" - -#endif /* SCIC_SDS_4_ENABLED */ - /** * * -- cgit v0.10.2 From c6d42257899505ea1982eba4c5e8bc7981e63e07 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 4 May 2011 13:49:32 -0700 Subject: isci: remove compile-time (Kconfig) silicon configuration Pre-production silicon support is deprecated, and will be removed completely in the future. Signed-off-by: Dan Williams diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index e18938b..8d9dae8 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -843,24 +843,6 @@ config SCSI_ISCI The experimental tag will be removed after the driver exits alpha -choice - prompt "Default Silicon Revision" - depends on SCSI_ISCI - default PBG_HBA_A2 - # temporary A-step silicon is pre-production - -config PBG_HBA_BETA - bool "B0" - -config PBG_HBA_A2 - bool "A2" - -config PBG_HBA_A0 - bool "A0" - -endchoice - - config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 10b60ab..6c2d686 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -87,15 +87,9 @@ MODULE_DEVICE_TABLE(pci, isci_id_table); /* linux isci specific settings */ -#if defined(CONFIG_PBG_HBA_A0) -int isci_si_rev = ISCI_SI_REVA0; -#elif defined(CONFIG_PBG_HBA_A2) int isci_si_rev = ISCI_SI_REVA2; -#else -int isci_si_rev = ISCI_SI_REVB0; -#endif module_param(isci_si_rev, int, 0); -MODULE_PARM_DESC(isci_si_rev, "override default si rev (0: A0 1: A2 2: B0)"); +MODULE_PARM_DESC(isci_si_rev, "(deprecated) override default si rev (0: A0 1: A2 2: B0)"); unsigned char no_outbound_task_to = 20; module_param(no_outbound_task_to, byte, 0); -- cgit v0.10.2 From f2f300806fe186a6c45020a444667755edcce672 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 15:02:02 -0700 Subject: isci: Convert SATA fis data structures to Linux native Converting of sata_fis_reg_d2h to dev_to_host_fis Converting of sata_fis_reg_h2d to host_to_dev_fis Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sata.h b/drivers/scsi/isci/core/intel_sata.h index 47390d5..977354d 100644 --- a/drivers/scsi/isci/core/intel_sata.h +++ b/drivers/scsi/isci/core/intel_sata.h @@ -101,62 +101,6 @@ struct sata_fis_header { u32 error:8; }; - -/** - * struct sata_fis_reg_h2d - This is the definition for a SATA Host to Device - * Register FIS. - * - * - */ -struct sata_fis_reg_h2d { - u32 fis_type:8; /* word 0 */ - u32 pm_port:4; - u32 reserved0:3; - u32 command_flag:1; - u32 command:8; - u32 features:8; - u32 lba_low:8; /* word 1 */ - u32 lba_mid:8; - u32 lba_high:8; - u32 device:8; - u32 lba_low_exp:8; /* word 2 */ - u32 lba_mid_exp:8; - u32 lba_high_exp:8; - u32 features_exp:8; - u32 sector_count:8; /* word 3 */ - u32 sector_count_exp:8; - u32 reserved1:8; - u32 control:8; - u32 reserved2; /* word 4 */ -}; - -/** - * struct sata_fis_reg_d2h - SATA Device To Host FIS - * - * - */ -struct sata_fis_reg_d2h { - u32 fis_type:8; /* word 0 */ - u32 pm_port:4; - u32 reserved0:2; - u32 irq:1; - u32 reserved1:1; - u32 status:8; - u32 error:8; - u8 lba_low; /* word 1 */ - u8 lba_mid; - u8 lba_high; - u8 device; - u8 lba_low_exp; /* word 2 */ - u8 lba_mid_exp; - u8 lba_high_exp; - u8 reserved; - u8 sector_count; /* word 3 */ - u8 sector_count_exp; - u16 reserved2; - u32 reserved3; -}; - /** * * diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 784c5b5..6fe39cce 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -64,11 +64,11 @@ */ +#include +#include #include "sci_status.h" - #include "intel_sata.h" #include "intel_sas.h" -#include struct scic_sds_phy; struct scic_sds_port; @@ -141,7 +141,7 @@ struct scic_sata_phy_properties { * This field delineates the signature FIS received from the * attached target. */ - struct sata_fis_reg_d2h signature_fis; + struct dev_to_host_fis signature_fis; /** * This field specifies to the user if a port selector is connected diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index d7c37dc..0b76fc7 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -54,6 +54,7 @@ */ #include +#include #include "scic_controller.h" #include "scic_phy.h" #include "scic_port.h" @@ -1754,17 +1755,11 @@ void scic_sds_controller_copy_sata_response( void *frame_header, void *frame_buffer) { - memcpy( - response_buffer, - frame_header, - sizeof(u32) - ); + memcpy(response_buffer, frame_header, sizeof(u32)); - memcpy( - (char *)((char *)response_buffer + sizeof(u32)), - frame_buffer, - sizeof(struct sata_fis_reg_d2h) - sizeof(u32) - ); + memcpy(response_buffer + sizeof(u32), + frame_buffer, + sizeof(struct dev_to_host_fis) - sizeof(u32)); } /** diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index c935c04..1b35b1a 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include "intel_ata.h" #include "intel_sata.h" #include "sci_base_state.h" @@ -620,11 +621,9 @@ enum sci_status scic_sata_phy_get_properties( struct scic_sata_phy_properties *properties) { if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { - memcpy( - &properties->signature_fis, - &sci_phy->phy_type.sata.signature_fis_buffer, - sizeof(struct sata_fis_reg_d2h) - ); + memcpy(&properties->signature_fis, + &sci_phy->phy_type.sata.signature_fis_buffer, + sizeof(struct dev_to_host_fis)); /* / @todo add support for port selectors. */ properties->is_port_selector_present = false; diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index fca95c1..c9fa207 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -280,7 +280,7 @@ struct scic_sds_phy { } sas; struct { - struct sata_fis_reg_d2h signature_fis_buffer; + struct dev_to_host_fis signature_fis_buffer; } sata; diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index ffc1607..1306765 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -53,7 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - +#include #include "intel_sas.h" #include "intel_sata.h" #include "intel_sat.h" @@ -1742,7 +1742,7 @@ enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, scic_sds_ssp_io_request_assign_buffers(sci_req); } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { scic_sds_stp_request_assign_buffers(sci_req); - memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d)); + memset(sci_req->command_buffer, 0, sizeof(struct host_to_dev_fis)); } else if (dev_is_expander(dev)) { scic_sds_smp_request_assign_buffers(sci_req); memset(sci_req->command_buffer, 0, sizeof(struct smp_request)); diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 8c98023..1cd111c 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -79,7 +79,7 @@ * request memory */ #define scic_sds_stp_request_get_h2d_reg_buffer(memory) \ - ((struct sata_fis_reg_h2d *)(\ + ((struct host_to_dev_fis *)(\ ((char *)(memory)) + sizeof(struct scic_sds_stp_request) \ )) @@ -90,9 +90,9 @@ * request memory */ #define scic_sds_stp_request_get_response_buffer(memory) \ - ((struct sata_fis_reg_d2h *)(\ + ((struct dev_to_host_fis *)(\ ((char *)(scic_sds_stp_request_get_h2d_reg_buffer(memory))) \ - + sizeof(struct sata_fis_reg_h2d) \ + + sizeof(struct host_to_dev_fis) \ )) /** @@ -127,8 +127,8 @@ u32 scic_sds_stp_request_get_object_size(void) { return sizeof(struct scic_sds_stp_request) - + sizeof(struct sata_fis_reg_h2d) - + sizeof(struct sata_fis_reg_d2h) + + sizeof(struct host_to_dev_fis) + + sizeof(struct dev_to_host_fis) + sizeof(struct scu_task_context) + SMP_CACHE_BYTES + sizeof(struct scu_sgl_element_pair) * SCU_MAX_SGL_ELEMENT_PAIRS; @@ -205,7 +205,7 @@ static void scu_sata_reqeust_construct_task_context( task_context->task_phase = 0x01; task_context->ssp_command_iu_length = - (sizeof(struct sata_fis_reg_h2d) - sizeof(u32)) / sizeof(u32); + (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); /* Set the first word of the H2D REG FIS */ task_context->type.words[0] = *(u32 *)sds_request->command_buffer; @@ -354,7 +354,8 @@ static void scu_stp_raw_request_construct_task_context( task_context->priority = SCU_TASK_PRIORITY_NORMAL; task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; task_context->type.stp.fis_type = SATA_FIS_TYPE_REGH2D; - task_context->transfer_length_bytes = sizeof(struct sata_fis_reg_h2d) - sizeof(u32); + task_context->transfer_length_bytes = + sizeof(struct host_to_dev_fis) - sizeof(u32); } void scic_stp_io_request_set_ncq_tag( @@ -1749,7 +1750,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet { struct scic_sds_request *sci_req = object; struct scu_task_context *task_context; - struct sata_fis_reg_h2d *h2d_fis; + struct host_to_dev_fis *h2d_fis; enum sci_status status; /* Clear the SRST bit */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index 6724c1d..807bc4e 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -69,7 +69,7 @@ struct scic_sds_stp_request { struct scic_sds_request parent; - struct sata_fis_reg_d2h d2h_reg_fis; + struct dev_to_host_fis d2h_reg_fis; union { u32 ncq; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 44b727f..3fe1a8a 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -59,6 +59,7 @@ #include "port.h" #include "host.h" +#include #include @@ -79,10 +80,8 @@ struct isci_phy { u8 sas_addr[SAS_ADDR_SIZE]; union { - u8 aif[sizeof(struct sci_sas_identify_address_frame)]; - u8 fis[sizeof(struct sata_fis_reg_d2h)]; - + struct dev_to_host_fis fis; } frame_rcvd; }; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 30d6ad8..5b38f2f 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -205,11 +205,8 @@ void isci_port_link_up( */ BUG_ON(call_status != SCI_SUCCESS); - memcpy(isci_phy->frame_rcvd.fis, - &sata_phy_properties.signature_fis, - sizeof(struct sata_fis_reg_d2h)); - - isci_phy->sas_phy.frame_rcvd_size = sizeof(struct sata_fis_reg_d2h); + isci_phy->frame_rcvd.fis = sata_phy_properties.signature_fis; + isci_phy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis); /* * For direct-attached SATA devices, the SCI core will diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 53ce0c2..0837450 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include "isci.h" #include "remote_device.h" #include "scic_io_request.h" @@ -142,11 +143,10 @@ void isci_sata_set_ncq_tag( * * none. */ -void isci_request_process_stp_response( - struct sas_task *task, - void *response_buffer) +void isci_request_process_stp_response(struct sas_task *task, + void *response_buffer) { - struct sata_fis_reg_d2h *d2h_reg_fis = (struct sata_fis_reg_d2h *)response_buffer; + struct dev_to_host_fis *d2h_reg_fis = response_buffer; struct task_status_struct *ts = &task->task_status; struct ata_task_resp *resp = (void *)&ts->buf[0]; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 95f3867..f9a1c41 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1452,10 +1452,8 @@ void isci_task_request_complete( memcpy(&tmf->resp.d2h_fis, scic_stp_io_request_get_d2h_reg_address( - request->sci_request_handle - ), - sizeof(struct sata_fis_reg_d2h) - ); + request->sci_request_handle), + sizeof(struct dev_to_host_fis)); } /* Manage the timer if it is still running. */ -- cgit v0.10.2 From e76d6180da436edf2cc3538cbed1f5b02b614613 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 15:02:03 -0700 Subject: isci: Convert ATA defines to Linux native defines * Removing all intel_sata and intel_ata defines * Removing the usage of SAT_PROTOCOL_*. We can get everything from sas_task * Moved SATA FIS types to local sas.h. These defines will have to go into include/scsi/sas.h eventually. * Added offsets for SATA FIS header in order to grab the values Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_ata.h b/drivers/scsi/isci/core/intel_ata.h deleted file mode 100644 index 48b297e..0000000 --- a/drivers/scsi/isci/core/intel_ata.h +++ /dev/null @@ -1,554 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file defines all of the ATA related constants, enumerations, and types. - * Please note that this file does not necessarily contain an exhaustive - * list of all constants, commands, sub-commands, etc. - * - * - */ - -#ifndef _ATA_H_ -#define _ATA_H_ - -#include - -/** - * - * - * ATA_COMMAND_CODES These constants depict the various ATA command codes - * defined in the ATA/ATAPI specification. - */ -#define ATA_IDENTIFY_DEVICE 0xEC -#define ATA_CHECK_POWER_MODE 0xE5 -#define ATA_STANDBY 0xE2 -#define ATA_STANDBY_IMMED 0xE0 -#define ATA_IDLE_IMMED 0xE1 -#define ATA_IDLE 0xE3 -#define ATA_FLUSH_CACHE 0xE7 -#define ATA_FLUSH_CACHE_EXT 0xEA -#define ATA_READ_DMA_EXT 0x25 -#define ATA_READ_DMA 0xC8 -#define ATA_READ_SECTORS_EXT 0x24 -#define ATA_READ_SECTORS 0x20 -#define ATA_WRITE_DMA_EXT 0x35 -#define ATA_WRITE_DMA 0xCA -#define ATA_WRITE_SECTORS_EXT 0x34 -#define ATA_WRITE_SECTORS 0x30 -#define ATA_WRITE_UNCORRECTABLE 0x45 -#define ATA_READ_VERIFY_SECTORS 0x40 -#define ATA_READ_VERIFY_SECTORS_EXT 0x42 -#define ATA_READ_BUFFER 0xE4 -#define ATA_WRITE_BUFFER 0xE8 -#define ATA_EXECUTE_DEVICE_DIAG 0x90 -#define ATA_SET_FEATURES 0xEF -#define ATA_SMART 0xB0 -#define ATA_PACKET_IDENTIFY 0xA1 -#define ATA_PACKET 0xA0 -#define ATA_READ_FPDMA 0x60 -#define ATA_WRITE_FPDMA 0x61 -#define ATA_READ_LOG_EXT 0x2F -#define ATA_NOP 0x00 -#define ATA_DEVICE_RESET 0x08 -#define ATA_MEDIA_EJECT 0xED - -/** - * - * - * ATA_SMART_SUB_COMMAND_CODES These constants define the ATA SMART command - * sub-codes that can be executed. - */ -#define ATA_SMART_SUB_CMD_ENABLE 0xD8 -#define ATA_SMART_SUB_CMD_DISABLE 0xD9 -#define ATA_SMART_SUB_CMD_RETURN_STATUS 0xDA -#define ATA_SMART_SUB_CMD_READ_LOG 0xD5 - -/** - * - * - * ATA_SET_FEATURES_SUB_COMMAND_CODES These constants define the ATA SET - * FEATURES command sub-codes that can be executed. - */ -#define ATA_SET_FEATURES_SUB_CMD_ENABLE_CACHE 0x02 -#define ATA_SET_FEATURES_SUB_CMD_DISABLE_CACHE 0x82 -#define ATA_SET_FEATURES_SUB_CMD_DISABLE_READ_AHEAD 0x55 -#define ATA_SET_FEATURES_SUB_CMD_ENABLE_READ_AHEAD 0xAA -#define ATA_SET_FEATURES_SUB_CMD_SET_TRANSFER_MODE 0x3 - -/** - * - * - * ATA_READ_LOG_EXT_PAGE_CODES This is a list of log page codes available for - * use. - */ -#define ATA_LOG_PAGE_NCQ_ERROR 0x10 -#define ATA_LOG_PAGE_SMART_SELF_TEST 0x06 -#define ATA_LOG_PAGE_EXTENDED_SMART_SELF_TEST 0x07 - -/** - * - * - * ATA_LOG_PAGE_NCQ_ERROR_CONSTANTS These constants define standard values for - * use when requesting the NCQ error log page. - */ -#define ATA_LOG_PAGE_NCQ_ERROR_SECTOR 0 -#define ATA_LOG_PAGE_NCQ_ERROR_SECTOR_COUNT 1 - -/** - * - * - * ATA_STATUS_REGISTER_BITS The following are status register bit definitions - * per ATA/ATAPI-7. - */ -#define ATA_STATUS_REG_BSY_BIT 0x80 -#define ATA_STATUS_REG_DEVICE_FAULT_BIT 0x20 -#define ATA_STATUS_REG_ERROR_BIT 0x01 - -/** - * - * - * ATA_ERROR_REGISTER_BITS The following are error register bit definitions per - * ATA/ATAPI-7. - */ -#define ATA_ERROR_REG_NO_MEDIA_BIT 0x02 -#define ATA_ERROR_REG_ABORT_BIT 0x04 -#define ATA_ERROR_REG_MEDIA_CHANGE_REQUEST_BIT 0x08 -#define ATA_ERROR_REG_ID_NOT_FOUND_BIT 0x10 -#define ATA_ERROR_REG_MEDIA_CHANGE_BIT 0x20 -#define ATA_ERROR_REG_UNCORRECTABLE_BIT 0x40 -#define ATA_ERROR_REG_WRITE_PROTECTED_BIT 0x40 -#define ATA_ERROR_REG_ICRC_BIT 0x80 - -/** - * - * - * ATA_CONTROL_REGISTER_BITS The following are control register bit definitions - * per ATA/ATAPI-7 - */ -#define ATA_CONTROL_REG_INTERRUPT_ENABLE_BIT 0x02 -#define ATA_CONTROL_REG_SOFT_RESET_BIT 0x04 -#define ATA_CONTROL_REG_HIGH_ORDER_BYTE_BIT 0x80 - -/** - * - * - * ATA_DEVICE_HEAD_REGISTER_BITS The following are device/head register bit - * definitions per ATA/ATAPI-7. - */ -#define ATA_DEV_HEAD_REG_LBA_MODE_ENABLE 0x40 -#define ATA_DEV_HEAD_REG_FUA_ENABLE 0x80 - -/** - * - * - * ATA_IDENTIFY_DEVICE_FIELD_LENGTHS The following constants define the number - * of bytes contained in various fields found in the IDENTIFY DEVICE data - * structure. - */ -#define ATA_IDENTIFY_SERIAL_NUMBER_LEN 20 -#define ATA_IDENTIFY_MODEL_NUMBER_LEN 40 -#define ATA_IDENTIFY_FW_REVISION_LEN 8 -#define ATA_IDENTIFY_48_LBA_LEN 8 -#define ATA_IDENTIFY_MEDIA_SERIAL_NUMBER_LEN 30 -#define ATA_IDENTIFY_WWN_LEN 8 - -/** - * - * - * ATA_IDENTIFY_DEVICE_FIELD_MASKS The following constants define bit masks - * utilized to determine if a feature is supported/enabled or if a bit is - * simply set inside of the IDENTIFY DEVICE data structre. - */ -#define ATA_IDENTIFY_REMOVABLE_MEDIA_ENABLE 0x0080 -#define ATA_IDENTIFY_CAPABILITIES1_NORMAL_DMA_ENABLE 0x0100 -#define ATA_IDENTIFY_CAPABILITIES1_STANDBY_ENABLE 0x2000 -#define ATA_IDENTIFY_COMMAND_SET_SUPPORTED0_SMART_ENABLE 0x0001 -#define ATA_IDENTIFY_COMMAND_SET_SUPPORTED1_48BIT_ENABLE 0x0400 -#define ATA_IDENTIFY_COMMAND_SET_WWN_SUPPORT_ENABLE 0x0100 -#define ATA_IDENTIFY_COMMAND_SET_ENABLED0_SMART_ENABLE 0x0001 -#define ATA_IDENTIFY_SATA_CAPABILITIES_NCQ_ENABLE 0x0100 -#define ATA_IDENTIFY_NCQ_QUEUE_DEPTH_ENABLE 0x001F -#define ATA_IDENTIFY_SECTOR_LARGER_THEN_512_ENABLE 0x0100 -#define ATA_IDENTIFY_LOGICAL_SECTOR_PER_PHYSICAL_SECTOR_MASK 0x000F -#define ATA_IDENTIFY_LOGICAL_SECTOR_PER_PHYSICAL_SECTOR_ENABLE 0x2000 -#define ATA_IDENTIFY_WRITE_UNCORRECTABLE_SUPPORT 0x0004 -#define ATA_IDENTIFY_COMMAND_SET_SMART_SELF_TEST_SUPPORTED 0x0002 - -/** - * - * - * ATAPI_IDENTIFY_DEVICE_FIELD_MASKS These constants define the various bit - * definitions for the fields in the PACKET IDENTIFY DEVICE data structure. - */ -#define ATAPI_IDENTIFY_16BYTE_CMD_PCKT_ENABLE 0x01 - -/** - * - * - * ATA_PACKET_FEATURE_BITS These constants define the various bit definitions - * for the ATA PACKET feature register. - */ -#define ATA_PACKET_FEATURE_DMA 0x01 -#define ATA_PACKET_FEATURE_OVL 0x02 -#define ATA_PACKET_FEATURE_DMADIR 0x04 - -/** - * - * - * ATA_Device_Power_Mode_Values These constants define the power mode values - * returned by ATA_Check_Power_Mode - */ -#define ATA_STANDBY_POWER_MODE 0x00 -#define ATA_IDLE_POWER_MODE 0x80 -#define ATA_ACTIVE_POWER_MODE 0xFF - -/** - * - * - * ATA_WRITE_UNCORRECTIABLE feature field values These constants define the - * Write Uncorrectable feature values used with the SATI translation. - */ -#define ATA_WRITE_UNCORRECTABLE_PSUEDO 0x55 -#define ATA_WRITE_UNCORRECTABLE_FLAGGED 0xAA - - - -/** - * struct ATA_IDENTIFY_DEVICE - This structure depicts the ATA IDENTIFY DEVICE - * data format. - * - * - */ -struct ata_identify_device_data { - u16 general_config_bits; /* word 00 */ - u16 obsolete0; /* word 01 (num cylinders) */ - u16 vendor_specific_config_bits; /* word 02 */ - u16 obsolete1; /* word 03 (num heads) */ - u16 retired1[2]; /* words 04-05 */ - u16 obsolete2; /* word 06 (sectors / track) */ - u16 reserved_for_compact_flash1[2]; /* words 07-08 */ - u16 retired0; /* word 09 */ - u8 serial_number[ATA_IDENTIFY_SERIAL_NUMBER_LEN]; /* word 10-19 */ - u16 retired2[2]; /* words 20-21 */ - u16 obsolete4; /* word 22 */ - u8 firmware_revision[ATA_IDENTIFY_FW_REVISION_LEN]; /* words 23-26 */ - u8 model_number[ATA_IDENTIFY_MODEL_NUMBER_LEN]; /* words 27-46 */ - u16 max_sectors_per_multiple; /* word 47 */ - u16 reserved0; /* word 48 */ - u16 capabilities1; /* word 49 */ - u16 capabilities2; /* word 50 */ - u16 obsolete5[2]; /* words 51-52 */ - u16 validity_bits; /* word 53 */ - u16 obsolete6[5]; /* - * words 54-58 Used to be: - * current cylinders, - * current heads, - * current sectors/Track, - * current capacity */ - u16 current_max_sectors_per_multiple; /* word 59 */ - u8 total_num_sectors[4]; /* words 60-61 */ - u16 obsolete7; /* word 62 */ - u16 multi_word_dma_mode; /* word 63 */ - u16 pio_modes_supported; /* word 64 */ - u16 min_multiword_dma_transfer_cycle; /* word 65 */ - u16 rec_min_multiword_dma_transfer_cycle; /* word 66 */ - u16 min_pio_transfer_no_flow_ctrl; /* word 67 */ - u16 min_pio_transfer_with_flow_ctrl; /* word 68 */ - u16 reserved1[2]; /* words 69-70 */ - u16 reserved2[4]; /* words 71-74 */ - u16 queue_depth; /* word 75 */ - u16 serial_ata_capabilities; /* word 76 */ - u16 serial_ata_reserved; /* word 77 */ - u16 serial_ata_features_supported; /* word 78 */ - u16 serial_ata_features_enabled; /* word 79 */ - u16 major_version_number; /* word 80 */ - u16 minor_version_number; /* word 81 */ - u16 command_set_supported0; /* word 82 */ - u16 command_set_supported1; /* word 83 */ - u16 command_set_supported_extention; /* word 84 */ - u16 command_set_enabled0; /* word 85 */ - u16 command_set_enabled1; /* word 86 */ - u16 command_set_default; /* word 87 */ - u16 ultra_dma_mode; /* word 88 */ - u16 security_erase_completion_time; /* word 89 */ - u16 enhanced_security_erase_time; /* word 90 */ - u16 current_power_mgmt_value; /* word 91 */ - u16 master_password_revision; /* word 92 */ - u16 hardware_reset_result; /* word 93 */ - u16 current_acoustic_management_value; /* word 94 */ - u16 stream_min_request_size; /* word 95 */ - u16 stream_transfer_time; /* word 96 */ - u16 stream_access_latency; /* word 97 */ - u16 stream_performance_granularity[2]; /* words 98-99 */ - u8 max_48bit_lba[ATA_IDENTIFY_48_LBA_LEN]; /* words 100-103 */ - u16 streaming_transfer_time; /* word 104 */ - u16 reserved3; /* word 105 */ - u16 physical_logical_sector_info; /* word 106 */ - u16 acoustic_test_interseek_delay; /* word 107 */ - u8 world_wide_name[ATA_IDENTIFY_WWN_LEN]; /* words 108-111 */ - u8 reserved_for_wwn_extention[ATA_IDENTIFY_WWN_LEN]; /* words 112-115 */ - u16 reserved4; /* word 116 */ - u8 words_per_logical_sector[4]; /* words 117-118 */ - u16 command_set_supported2; /* word 119 */ - u16 reserved5[7]; /* words 120-126 */ - u16 removable_media_status; /* word 127 */ - u16 security_status; /* word 128 */ - u16 vendor_specific1[31]; /* words 129-159 */ - u16 cfa_power_mode1; /* word 160 */ - u16 reserved_for_compact_flash2[7]; /* words 161-167 */ - u16 device_nominal_form_factor; /* word 168 */ - u16 reserved_for_compact_flash3[7]; /* words 169-175 */ - u16 current_media_serial_number[ATA_IDENTIFY_MEDIA_SERIAL_NUMBER_LEN]; /* words 176-205 */ - u16 reserved6[3]; /* words 206-208 */ - u16 logical_sector_alignment; /* words 209 */ - u16 reserved7[7]; /* words 210-216 */ - u16 nominal_media_rotation_rate; /* word 217 */ - u16 reserved8[37]; /* words 218-254 */ - u16 integrity_word; /* word 255 */ - -}; - -#define ATA_IDENTIFY_DEVICE_GET_OFFSET(field_name) \ - ((unsigned long)&(((struct ata_identify_device_data *)0)->field_name)) -#define ATA_IDENTIFY_DEVICE_WCE_ENABLE 0x20 -#define ATA_IDENTIFY_DEVICE_RA_ENABLE 0x40 - -/** - * struct ATAPI_IDENTIFY_PACKET_DATA - The following structure depicts the - * ATA-ATAPI 7 version of the IDENTIFY PACKET DEVICE data structure. - * - * - */ -struct atapi_identify_packet_device { - u16 generalConfigBits; /* word 00 */ - u16 reserved0; /* word 01 (num cylinders) */ - u16 uniqueConfigBits; /* word 02 */ - u16 reserved1[7]; /* words 03 - 09 */ - u8 serialNumber[ATA_IDENTIFY_SERIAL_NUMBER_LEN]; /* word 10-19 */ - u16 reserved2[3]; /* words 20-22 */ - u8 firmwareRevision[ATA_IDENTIFY_FW_REVISION_LEN]; /* words 23-26 */ - u8 modelNumber[ATA_IDENTIFY_MODEL_NUMBER_LEN]; /* words 27-46 */ - u16 reserved4[2]; /* words 47-48 */ - u16 capabilities1; /* word 49 */ - u16 capabilities2; /* word 50 */ - u16 obsolete0[2]; /* words 51-52 */ - u16 validityBits; /* word 53 */ - u16 reserved[8]; /* words 54-61 */ - - u16 DMADIRBitRequired; /* word 62, page2 */ - u16 multiWordDmaMode; /* word 63 */ - u16 pioModesSupported; /* word 64 */ - u16 minMultiwordDmaTransferCycle; /* word 65 */ - u16 recMinMultiwordDmaTransferCycle; /* word 66 */ - u16 minPioTransferNoFlowCtrl; /* word 67 */ - u16 minPioTransferWithFlowCtrl; /* word 68 */ - u16 reserved6[2]; /* words 69-70 */ - u16 nsFromPACKETReceiptToBusRelease; /* word 71 */ - u16 nsFromSERVICEReceiptToBSYreset; /* wore 72 */ - u16 reserved7[2]; /* words 73-74 */ - u16 queueDepth; /* word 75 */ - u16 serialAtaCapabilities; /* word 76 */ - u16 serialAtaReserved; /* word 77 */ - u16 serialAtaFeaturesSupported; /* word 78 */ - u16 serialAtaFeaturesEnabled; /* word 79 */ - - u16 majorVersionNumber; /* word 80, page3 */ - u16 minorVersionNumber; /* word 81 */ - u16 commandSetSupported0; /* word 82 */ - u16 commandSetSupported1; /* word 83 */ - - u16 commandSetSupportedExtention; /* word 84, page4 */ - u16 commandSetEnabled0; /* word 85 */ - u16 commandSetEnabled1; /* word 86 */ - u16 commandSetDefault; /* word 87 */ - - u16 ultraDmaMode; /* word 88, page5 */ - u16 reserved8[4]; /* words 89 - 92 */ - - u16 hardwareResetResult; /* word 93, page6 */ - u16 currentAcousticManagementValue; /* word 94 */ - u16 reserved9[30]; /* words 95-124 */ - u16 ATAPIByteCount0Behavior; /* word 125 */ - u16 obsolete1; /* word 126 */ - u16 removableMediaStatus; /* word 127, */ - - u16 securityStatus; /* word 128, page7 */ - u16 vendorSpecific1[31]; /* words 129-159 */ - u16 reservedForCompactFlash[16]; /* words 160-175 */ - u16 reserved10[79]; /* words 176-254 */ - u16 integrityWord; /* word 255 */ -}; - -/** - * struct ata_extended_smart_self_test_log - The following structure depicts - * the ATA-8 version of the Extended SMART self test log page descriptor - * entry. - * - * - */ -union ata_descriptor_entry { - struct DESCRIPTOR_ENTRY { - u8 lba_field; - u8 status_byte; - u8 time_stamp_low; - u8 time_stamp_high; - u8 checkpoint_byte; - u8 failing_lba_low; - u8 failing_lba_mid; - u8 failing_lba_high; - u8 failing_lba_low_ext; - u8 failing_lba_mid_ext; - u8 failing_lba_high_ext; - - u8 vendor_specific1; - u8 vendor_specific2; - u8 vendor_specific3; - u8 vendor_specific4; - u8 vendor_specific5; - u8 vendor_specific6; - u8 vendor_specific7; - u8 vendor_specific8; - u8 vendor_specific9; - u8 vendor_specific10; - u8 vendor_specific11; - u8 vendor_specific12; - u8 vendor_specific13; - u8 vendor_specific14; - u8 vendor_specific15; - } DESCRIPTOR_ENTRY; - - u8 descriptor_entry[26]; - -}; - -/** - * struct ata_extended_smart_self_test_log - The following structure depicts - * the ATA-8 version of the SMART self test log page descriptor entry. - * - * - */ -union ata_smart_descriptor_entry { - struct SMART_DESCRIPTOR_ENTRY { - u8 lba_field; - u8 status_byte; - u8 time_stamp_low; - u8 time_stamp_high; - u8 checkpoint_byte; - u8 failing_lba_low; - u8 failing_lba_mid; - u8 failing_lba_high; - u8 failing_lba_low_ext; - - u8 vendor_specific1; - u8 vendor_specific2; - u8 vendor_specific3; - u8 vendor_specific4; - u8 vendor_specific5; - u8 vendor_specific6; - u8 vendor_specific7; - u8 vendor_specific8; - u8 vendor_specific9; - u8 vendor_specific10; - u8 vendor_specific11; - u8 vendor_specific12; - u8 vendor_specific13; - u8 vendor_specific14; - u8 vendor_specific15; - } SMART_DESCRIPTOR_ENTRY; - - u8 smart_descriptor_entry[24]; - -}; - -/** - * struct ata_extended_smart_self_test_log - The following structure depicts - * the ATA-8 version of the Extended SMART self test log page. - * - * - */ -struct ata_extended_smart_self_test_log { - u8 self_test_log_data_structure_revision_number; /* byte 0 */ - u8 reserved0; /* byte 1 */ - u8 self_test_descriptor_index[2]; /* byte 2-3 */ - - union ata_descriptor_entry descriptor_entrys[19]; /* bytes 4-497 */ - - u8 vendor_specific[2]; /* byte 498-499 */ - u8 reserved1[11]; /* byte 500-510 */ - u8 data_structure_checksum; /* byte 511 */ - -}; - -/** - * struct ata_extended_smart_self_test_log - The following structure depicts - * the ATA-8 version of the SMART self test log page. - * - * - */ -struct ata_smart_self_test_log { - u8 self_test_log_data_structure_revision_number[2]; /* bytes 0-1 */ - - union ata_smart_descriptor_entry descriptor_entrys[21]; /* bytes 2-505 */ - - u8 vendor_specific[2]; /* byte 506-507 */ - u8 self_test_index; /* byte 508 */ - u8 reserved1[2]; /* byte 509-510 */ - u8 data_structure_checksum; /* byte 511 */ - -}; - -#endif /* _ATA_H_ */ - diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index c12e6d4..119eb5b 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -62,8 +62,7 @@ * * */ - -#include "intel_sata.h" +#include #include "intel_scsi.h" /** diff --git a/drivers/scsi/isci/core/intel_sat.h b/drivers/scsi/isci/core/intel_sat.h deleted file mode 100644 index c4d78ed..0000000 --- a/drivers/scsi/isci/core/intel_sat.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SAT_H_ -#define _SAT_H_ - -/** - * This file contains constants and constructs defined in the SCSI to ATA - * Translation (SAT) T10 standard. For more information please refer to - * www.t10.org. - * - * - */ - -/** - * - * - * SAT_PROTOCOLS These constants indicate the various protocol values that can - * be supported in a SAT translator. - */ -#define SAT_PROTOCOL_ATA_HARD_RESET 0 -#define SAT_PROTOCOL_SOFT_RESET 1 -#define SAT_PROTOCOL_NON_DATA 3 -#define SAT_PROTOCOL_PIO_DATA_IN 4 -#define SAT_PROTOCOL_PIO_DATA_OUT 5 -#define SAT_PROTOCOL_DMA 6 -#define SAT_PROTOCOL_DMA_QUEUED 7 -#define SAT_PROTOCOL_DEVICE_DIAGNOSTIC 8 -#define SAT_PROTOCOL_DEVICE_RESET 9 -#define SAT_PROTOCOL_UDMA_DATA_IN 10 -#define SAT_PROTOCOL_UDMA_DATA_OUT 11 -#define SAT_PROTOCOL_FPDMA 12 -#define SAT_PROTOCOL_RETURN_RESPONSE_INFO 15 - -#define SAT_PROTOCOL_PACKET 0x10 -#define SAT_PROTOCOL_PACKET_NON_DATA (SAT_PROTOCOL_PACKET | 0x0) -#define SAT_PROTOCOL_PACKET_DMA_DATA_IN (SAT_PROTOCOL_PACKET | 0x1) -#define SAT_PROTOCOL_PACKET_DMA_DATA_OUT (SAT_PROTOCOL_PACKET | 0x2) -#define SAT_PROTOCOL_PACKET_PIO_DATA_IN (SAT_PROTOCOL_PACKET | 0x3) -#define SAT_PROTOCOL_PACKET_PIO_DATA_OUT (SAT_PROTOCOL_PACKET | 0x4) - -#endif /* _SAT_H_ */ - diff --git a/drivers/scsi/isci/core/intel_sata.h b/drivers/scsi/isci/core/intel_sata.h deleted file mode 100644 index 977354d..0000000 --- a/drivers/scsi/isci/core/intel_sata.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SATA_H_ -#define _SATA_H_ - -#include - -/** - * This file defines all of the SATA releated constants, enumerations, and - * types. Please note that this file does not necessarily contain an - * exhaustive list of all contants and commands. - * - * - */ - -/** - * - * - * SATA FIS Types These constants depict the various SATA FIS types devined in - * the serial ATA specification. - */ -#define SATA_FIS_TYPE_REGH2D 0x27 -#define SATA_FIS_TYPE_REGD2H 0x34 -#define SATA_FIS_TYPE_SETDEVBITS 0xA1 -#define SATA_FIS_TYPE_DMA_ACTIVATE 0x39 -#define SATA_FIS_TYPE_DMA_SETUP 0x41 -#define SATA_FIS_TYPE_BIST_ACTIVATE 0x58 -#define SATA_FIS_TYPE_PIO_SETUP 0x5F -#define SATA_FIS_TYPE_DATA 0x46 - -#define SATA_REGISTER_FIS_SIZE 0x20 - -/** - * struct sata_fis_header - This is the common definition for a SATA FIS Header - * word. A different header word is defined for any FIS type that does not - * use the standard header. - * - * - */ -struct sata_fis_header { - u32 fis_type:8; /* word 0 */ - u32 pm_port:4; - u32 reserved:1; - u32 direction_flag:1; /* direction */ - u32 interrupt_flag:1; - u32 command_flag:1; /* command, auto_activate, or notification */ - u32 status:8; - u32 error:8; -}; - -/** - * - * - * Status field bit definitions - */ -#define SATA_FIS_STATUS_DEVBITS_MASK (0x77) - -/** - * struct sata_fis_set_dev_bits - SATA Set Device Bits FIS - * - * - */ -struct sata_fis_set_dev_bits { - u32 fis_type:8; /* word 0 */ - u32 pm_port:4; - u32 reserved0:2; - u32 irq:1; - u32 notification:1; - u32 status_low:4; - u32 status_high:4; - u32 error:8; - u32 s_active; /* word 1 */ -}; - -/** - * struct sata_fis_dma_activate - SATA DMA Activate FIS - * - * - */ -struct sata_fis_dma_activate { - u32 fis_type:8; /* word 0 */ - u32 pm_port:4; - u32 reserved0:24; -}; - -/** - * - * - * The lower 5 bits in the DMA Buffer ID Low field of the DMA Setup are used to - * communicate the command tag. - */ -#define SATA_DMA_SETUP_TAG_ENABLE 0x1F - -#define SATA_DMA_SETUP_AUTO_ACT_ENABLE 0x80 - -/** - * struct sata_fis_dma_setup - SATA DMA Setup FIS - * - * - */ -struct sata_fis_dma_setup { - u32 fis_type:8; /* word 0 */ - u32 pm_port:4; - u32 reserved_00:1; - u32 direction:1; - u32 irq:1; - u32 auto_activate:1; - u32 reserved_01:16; - u32 dma_buffer_id_low; /* word 1 */ - u32 dma_buffer_id_high; /* word 2 */ - u32 reserved0; /* word 3 */ - u32 dma_buffer_offset; /* word 4 */ - u32 dma_transfer_count; /* word 5 */ - u32 reserved1; /* word 6 */ -}; - -/** - * struct sata_fis_bist_activate - SATA BIST Activate FIS - * - * - */ -struct sata_fis_bist_activate { - u32 fis_type:8; /* word 0 */ - u32 reserved0:8; - u32 pattern_definition:8; - u32 reserved1:8; - u32 data1; /* word 1 */ - u32 data2; /* word 1 */ -}; - -/* - * SATA PIO Setup FIS - */ -struct sata_fis_pio_setup { - u32 fis_type:8; /* word 0 */ - u32 pm_port:4; - u32 reserved_00:1; - u32 direction:1; - u32 irq:1; - u32 reserved_01:1; - u32 status:8; - u32 error:8; - u32 lba_low:8; /* word 1 */ - u32 lba_mid:8; - u32 lba_high:8; - u32 device:8; - u32 lba_low_exp:8; /* word 2 */ - u32 lba_mid_exp:8; - u32 lba_high_exp:8; - u32 reserved:8; - u32 sector_count:8; /* word 3 */ - u32 sector_count_exp:8; - u32 reserved1:8; - u32 ending_status:8; - u32 transfter_count:16; /* word 4 */ - u32 reserved3:16; -}; - -/** - * struct sata_fis_data - SATA Data FIS - * - * - */ -struct sata_fis_data { - u32 fis_type:8; /* word 0 */ - u32 pm_port:4; - u32 reserved0:24; - u8 data[4]; /* word 1 */ -}; - -#endif /* _SATA_H_ */ diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 6fe39cce..d8c4bf1 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -67,7 +67,6 @@ #include #include #include "sci_status.h" -#include "intel_sata.h" #include "intel_sas.h" struct scic_sds_phy; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 1b35b1a..0f292f1 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -54,8 +54,7 @@ */ #include -#include "intel_ata.h" -#include "intel_sata.h" +#include "sas.h" #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_phy.h" @@ -1279,23 +1278,19 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle u32 frame_index) { enum sci_status result; - u32 *frame_words; - struct sata_fis_header *fis_frame_header; + struct dev_to_host_fis *frame_header; u32 *fis_frame_data; result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_phy_get_controller(sci_phy)->uf_control), frame_index, - (void **)&frame_words); + (void **)&frame_header); - if (result != SCI_SUCCESS) { + if (result != SCI_SUCCESS) return result; - } - - fis_frame_header = (struct sata_fis_header *)frame_words; - if ((fis_frame_header->fis_type == SATA_FIS_TYPE_REGD2H) && - !(fis_frame_header->status & ATA_STATUS_REG_BSY_BIT)) { + if ((frame_header->fis_type == FIS_REGD2H) && + !(frame_header->status & ATA_BUSY)) { scic_sds_unsolicited_frame_control_get_buffer( &(scic_sds_phy_get_controller(sci_phy)->uf_control), frame_index, @@ -1303,10 +1298,10 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle scic_sds_controller_copy_sata_response( &sci_phy->phy_type.sata.signature_fis_buffer, - frame_words, + frame_header, fis_frame_data); - /* We got the IAF we can now go to the await spinup semaphore state */ + /* got IAF we can now go to the await spinup semaphore state */ sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); @@ -1318,7 +1313,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle __func__, frame_index); - /* Regardless of the result release this frame since we are done with it */ + /* Regardless of the result we are done with this frame with it */ scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), frame_index); diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index c9fa207..22b3119 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -56,7 +56,6 @@ #ifndef _SCIC_SDS_PHY_H_ #define _SCIC_SDS_PHY_H_ -#include "intel_sata.h" #include "intel_sas.h" #include "scu_registers.h" #include "sci_base_state_machine.h" diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 1306765..31df526 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -55,8 +55,6 @@ #include #include "intel_sas.h" -#include "intel_sata.h" -#include "intel_sat.h" #include "scic_controller.h" #include "scic_io_request.h" #include "scic_sds_controller.h" @@ -631,51 +629,55 @@ static void scu_ssp_task_request_construct_task_context( * * enum sci_status */ -static enum sci_status scic_io_request_construct_sata(struct scic_sds_request *sci_req, - u8 proto, u32 len, - enum dma_data_direction dir, - bool copy) +static enum sci_status +scic_io_request_construct_sata(struct scic_sds_request *sci_req, + u32 len, + enum dma_data_direction dir, + bool copy) { enum sci_status status = SCI_SUCCESS; + struct isci_request *ireq = sci_req->ireq; + struct sas_task *task = isci_request_access_task(ireq); + + /* check for management protocols */ + if (ireq->ttype == tmf_task) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + + if (tmf->tmf_code == isci_tmf_sata_srst_high || + tmf->tmf_code == isci_tmf_sata_srst_low) + return scic_sds_stp_soft_reset_request_construct(sci_req); + else { + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: Request 0x%p received un-handled SAT " + "management protocol 0x%x.\n", + __func__, sci_req, tmf->tmf_code); + + return SCI_FAILURE; + } + } - switch (proto) { - case SAT_PROTOCOL_PIO_DATA_IN: - case SAT_PROTOCOL_PIO_DATA_OUT: - status = scic_sds_stp_pio_request_construct(sci_req, proto, copy); - break; - - case SAT_PROTOCOL_UDMA_DATA_IN: - case SAT_PROTOCOL_UDMA_DATA_OUT: - status = scic_sds_stp_udma_request_construct(sci_req, len, dir); - break; + if (!sas_protocol_ata(task->task_proto)) { + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: Non-ATA protocol in SATA path: 0x%x\n", + __func__, + task->task_proto); + return SCI_FAILURE; - case SAT_PROTOCOL_ATA_HARD_RESET: - case SAT_PROTOCOL_SOFT_RESET: - status = scic_sds_stp_soft_reset_request_construct(sci_req); - break; + } - case SAT_PROTOCOL_NON_DATA: - status = scic_sds_stp_non_data_request_construct(sci_req); - break; + /* non data */ + if (task->data_dir == DMA_NONE) + return scic_sds_stp_non_data_request_construct(sci_req); - case SAT_PROTOCOL_FPDMA: - status = scic_sds_stp_ncq_request_construct(sci_req, len, dir); - break; + /* NCQ */ + if (task->ata_task.use_ncq) + return scic_sds_stp_ncq_request_construct(sci_req, len, dir); - case SAT_PROTOCOL_DMA_QUEUED: - case SAT_PROTOCOL_DMA: - case SAT_PROTOCOL_DEVICE_DIAGNOSTIC: - case SAT_PROTOCOL_DEVICE_RESET: - case SAT_PROTOCOL_RETURN_RESPONSE_INFO: - default: - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p received un-handled " - "SAT Protocl %d.\n", - __func__, sci_req, proto); - - status = SCI_FAILURE; - break; - } + /* DMA */ + if (task->ata_task.dma_xfer) + return scic_sds_stp_udma_request_construct(sci_req, len, dir); + else /* PIO */ + return scic_sds_stp_pio_request_construct(sci_req, copy); return status; } @@ -735,7 +737,6 @@ enum sci_status scic_io_request_construct_basic_sata( { enum sci_status status; struct scic_sds_stp_request *stp_req; - u8 proto; u32 len; enum dma_data_direction dir; bool copy = false; @@ -748,10 +749,9 @@ enum sci_status scic_io_request_construct_basic_sata( len = isci_request_io_request_get_transfer_length(isci_request); dir = isci_request_io_request_get_data_direction(isci_request); - proto = isci_sata_get_sat_protocol(isci_request); copy = (task->data_dir == DMA_NONE) ? false : true; - status = scic_io_request_construct_sata(sci_req, proto, len, dir, copy); + status = scic_io_request_construct_sata(sci_req, len, dir, copy); if (status == SCI_SUCCESS) sci_base_state_machine_change_state(&sci_req->state_machine, @@ -764,33 +764,30 @@ enum sci_status scic_io_request_construct_basic_sata( enum sci_status scic_task_request_construct_sata( struct scic_sds_request *sci_req) { - enum sci_status status; - u8 sat_protocol; - struct isci_request *isci_request = sci_req->ireq; - - sat_protocol = isci_sata_get_sat_protocol(isci_request); + enum sci_status status = SCI_SUCCESS; + struct isci_request *ireq = sci_req->ireq; - switch (sat_protocol) { - case SAT_PROTOCOL_ATA_HARD_RESET: - case SAT_PROTOCOL_SOFT_RESET: - status = scic_sds_stp_soft_reset_request_construct(sci_req); - break; + /* check for management protocols */ + if (ireq->ttype == tmf_task) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); - default: - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p received un-handled SAT " - "Protocl %d.\n", - __func__, - sci_req, - sat_protocol); + if (tmf->tmf_code == isci_tmf_sata_srst_high || + tmf->tmf_code == isci_tmf_sata_srst_low) { + status = scic_sds_stp_soft_reset_request_construct(sci_req); + } else { + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: Request 0x%p received un-handled SAT " + "Protocol 0x%x.\n", + __func__, sci_req, tmf->tmf_code); - status = SCI_FAILURE; - break; + return SCI_FAILURE; + } } if (status == SCI_SUCCESS) - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return status; } diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 1cd111c..b3ad33b 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -53,10 +53,8 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - -#include "intel_ata.h" -#include "intel_sata.h" -#include "intel_sat.h" +#include +#include "sas.h" #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_io_request.h" @@ -136,7 +134,8 @@ u32 scic_sds_stp_request_get_object_size(void) void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) { - struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); sci_req->command_buffer = scic_sds_stp_request_get_h2d_reg_buffer(stp_req); sci_req->response_buffer = scic_sds_stp_request_get_response_buffer(stp_req); @@ -353,7 +352,7 @@ static void scu_stp_raw_request_construct_task_context( task_context->control_frame = 0; task_context->priority = SCU_TASK_PRIORITY_NORMAL; task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; - task_context->type.stp.fis_type = SATA_FIS_TYPE_REGH2D; + task_context->type.stp.fis_type = FIS_REGH2D; task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); } @@ -484,68 +483,65 @@ static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_han * if the received frame was processed successfully. */ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( - struct scic_sds_request *request, + struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; - struct sata_fis_header *frame_header; + struct dev_to_host_fis *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); status = scic_sds_unsolicited_frame_control_get_header( - &sci_req->parent.owning_controller->uf_control, + &stp_req->parent.owning_controller->uf_control, frame_index, - (void **)&frame_header - ); + (void **)&frame_header); if (status == SCI_SUCCESS) { switch (frame_header->fis_type) { - case SATA_FIS_TYPE_REGD2H: + case FIS_REGD2H: scic_sds_unsolicited_frame_control_get_buffer( - &sci_req->parent.owning_controller->uf_control, + &stp_req->parent.owning_controller->uf_control, frame_index, - (void **)&frame_buffer - ); + (void **)&frame_buffer); scic_sds_controller_copy_sata_response( - &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer - ); + &stp_req->d2h_reg_fis, + (u32 *)frame_header, + frame_buffer); /* The command has completed with error */ scic_sds_request_set_status( - &sci_req->parent, + &stp_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); + SCI_FAILURE_IO_RESPONSE_VALID); break; default: - dev_warn(scic_to_dev(request->owning_controller), + dev_warn(scic_to_dev(sci_req->owning_controller), "%s: IO Request:0x%p Frame Id:%d protocol " "violation occurred\n", - __func__, sci_req, frame_index); + __func__, stp_req, frame_index); scic_sds_request_set_status( - &sci_req->parent, + &stp_req->parent, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION - ); + SCI_FAILURE_PROTOCOL_VIOLATION); break; } sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &stp_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame( - sci_req->parent.owning_controller, frame_index); + stp_req->parent.owning_controller, frame_index); } else - dev_err(scic_to_dev(request->owning_controller), + dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, sci_req, frame_index, status); + __func__, stp_req, frame_index, status); return status; } @@ -603,7 +599,8 @@ static const struct sci_base_state scic_sds_stp_request_started_non_data_substat enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req) { - struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); scic_sds_stp_non_ncq_request_construct(sci_req); @@ -634,7 +631,8 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( struct scic_sds_request *sci_req, u32 length) { - struct scic_sds_stp_request *stp_req = (struct scic_sds_stp_request *)sci_req; + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); struct scu_sgl_element *current_sgl; /* @@ -654,7 +652,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( task_context->command_iu_upper = current_sgl->address_upper; task_context->command_iu_lower = current_sgl->address_lower; task_context->transfer_length_bytes = length; - task_context->type.stp.fis_type = SATA_FIS_TYPE_DATA; + task_context->type.stp.fis_type = FIS_DATA; /* send the new TC out. */ return scic_controller_continue_io(sci_req); @@ -675,7 +673,8 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data( u32 remaining_bytes_in_current_sgl = 0; enum sci_status status = SCI_SUCCESS; - struct scic_sds_stp_request *stp_req = (struct scic_sds_stp_request *)sci_req; + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); sgl_offset = stp_req->type.pio.request_current.sgl_offset; @@ -855,122 +854,126 @@ static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completi * enum sci_status */ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( - struct scic_sds_request *request, + struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; - struct sata_fis_header *frame_header; + struct dev_to_host_fis *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *sci_req; - - sci_req = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + struct isci_request *ireq = sci_req->ireq; + struct sas_task *task = isci_request_access_task(ireq); status = scic_sds_unsolicited_frame_control_get_header( - &(sci_req->parent.owning_controller->uf_control), + &(stp_req->parent.owning_controller->uf_control), frame_index, - (void **)&frame_header - ); + (void **)&frame_header); if (status == SCI_SUCCESS) { switch (frame_header->fis_type) { - case SATA_FIS_TYPE_PIO_SETUP: + case FIS_PIO_SETUP: /* Get from the frame buffer the PIO Setup Data */ scic_sds_unsolicited_frame_control_get_buffer( - &(sci_req->parent.owning_controller->uf_control), + &(stp_req->parent.owning_controller->uf_control), frame_index, - (void **)&frame_buffer - ); + (void **)&frame_buffer); - /* - * Get the data from the PIO Setup - * The SCU Hardware returns first word in the frame_header and the rest - * of the data is in the frame buffer so we need to back up one dword */ - sci_req->type.pio.pio_transfer_bytes = - (u16)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->transfter_count; - sci_req->type.pio.ending_status = - (u8)((struct sata_fis_pio_setup *)(&frame_buffer[-1]))->ending_status; + /* Get the data from the PIO Setup The SCU Hardware + * returns first word in the frame_header and the rest + * of the data is in the frame buffer so we need to back + * up one dword + */ + + /* transfer_count: first 16bits in the 4th dword */ + stp_req->type.pio.pio_transfer_bytes = + frame_buffer[3] & 0xffff; + + /* ending_status: 4th byte in the 3rd dword */ + stp_req->type.pio.ending_status = + (frame_buffer[2] >> 24) & 0xff; scic_sds_controller_copy_sata_response( - &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer - ); + &stp_req->d2h_reg_fis, + (u32 *)frame_header, + frame_buffer); - sci_req->d2h_reg_fis.status = - sci_req->type.pio.ending_status; + stp_req->d2h_reg_fis.status = + stp_req->type.pio.ending_status; - /* The next state is dependent on whether the request was PIO Data-in or Data out */ - if (sci_req->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_IN) { + /* The next state is dependent on whether the + * request was PIO Data-in or Data out + */ + if (task->data_dir == DMA_FROM_DEVICE) { sci_base_state_machine_change_state( - &sci_req->parent.started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE - ); - } else if (sci_req->type.pio.sat_protocol == SAT_PROTOCOL_PIO_DATA_OUT) { + &stp_req->parent.started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); + } else if (task->data_dir == DMA_TO_DEVICE) { /* Transmit data */ - status = scic_sds_stp_request_pio_data_out_transmit_data(request); + status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); if (status == SCI_SUCCESS) { sci_base_state_machine_change_state( - &sci_req->parent.started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE - ); + &stp_req->parent.started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); } } break; - case SATA_FIS_TYPE_SETDEVBITS: + case FIS_SETDEVBITS: sci_base_state_machine_change_state( - &sci_req->parent.started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); + &stp_req->parent.started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); break; - case SATA_FIS_TYPE_REGD2H: - if ((frame_header->status & ATA_STATUS_REG_BSY_BIT) == 0) { + case FIS_REGD2H: + if ((frame_header->status & ATA_BUSY) == 0) { scic_sds_unsolicited_frame_control_get_buffer( - &(sci_req->parent.owning_controller->uf_control), + &(stp_req->parent.owning_controller->uf_control), frame_index, - (void **)&frame_buffer - ); + (void **)&frame_buffer); scic_sds_controller_copy_sata_response( - &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer); + &stp_req->d2h_reg_fis, + (u32 *)frame_header, + frame_buffer); scic_sds_request_set_status( - &sci_req->parent, + &stp_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); + SCI_FAILURE_IO_RESPONSE_VALID); sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &stp_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); } else { - /* - * Now why is the drive sending a D2H Register FIS when it is still busy? - * Do nothing since we are still in the right state. */ - dev_dbg(scic_to_dev(request->owning_controller), + /* Now why is the drive sending a D2H Register + * FIS when it is still busy? + * Do nothing since we are still in the right + * state. + */ + dev_dbg(scic_to_dev(sci_req->owning_controller), "%s: SCIC PIO Request 0x%p received " "D2H Register FIS with BSY status " "0x%x\n", __func__, - sci_req, + stp_req, frame_header->status); } break; default: + /* FIXME: what do we do here? */ break; } /* Frame is decoded return it to the controller */ scic_sds_controller_release_frame( - sci_req->parent.owning_controller, - frame_index - ); + stp_req->parent.owning_controller, + frame_index); } else - dev_err(scic_to_dev(request->owning_controller), + dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, sci_req, frame_index, status); + __func__, stp_req, frame_index, status); return status; } @@ -983,100 +986,94 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( * enum sci_status */ static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler( - struct scic_sds_request *request, + struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; - struct sata_fis_header *frame_header; + struct dev_to_host_fis *frame_header; struct sata_fis_data *frame_buffer; - struct scic_sds_stp_request *sci_req; - - sci_req = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); status = scic_sds_unsolicited_frame_control_get_header( - &(sci_req->parent.owning_controller->uf_control), + &(stp_req->parent.owning_controller->uf_control), frame_index, - (void **)&frame_header - ); + (void **)&frame_header); if (status == SCI_SUCCESS) { - if (frame_header->fis_type == SATA_FIS_TYPE_DATA) { - if (sci_req->type.pio.request_current.sgl_pair == NULL) { - sci_req->parent.saved_rx_frame_index = frame_index; - sci_req->type.pio.pio_transfer_bytes = 0; + if (frame_header->fis_type == FIS_DATA) { + if (stp_req->type.pio.request_current.sgl_pair == + NULL) { + stp_req->parent.saved_rx_frame_index = + frame_index; + stp_req->type.pio.pio_transfer_bytes = 0; } else { status = scic_sds_unsolicited_frame_control_get_buffer( - &(sci_req->parent.owning_controller->uf_control), + &(stp_req->parent.owning_controller->uf_control), frame_index, - (void **)&frame_buffer - ); + (void **)&frame_buffer); - status = scic_sds_stp_request_pio_data_in_copy_data(sci_req, (u8 *)frame_buffer); + status = scic_sds_stp_request_pio_data_in_copy_data( + stp_req, + (u8 *)frame_buffer); /* Frame is decoded return it to the controller */ scic_sds_controller_release_frame( - sci_req->parent.owning_controller, - frame_index - ); + stp_req->parent.owning_controller, + frame_index); } /* - * Check for the end of the transfer, are there more bytes remaining - * for this data transfer */ - if ( - (status == SCI_SUCCESS) - && (sci_req->type.pio.pio_transfer_bytes == 0) - ) { - if ((sci_req->type.pio.ending_status & ATA_STATUS_REG_BSY_BIT) == 0) { + * Check for the end of the transfer, are there more + * bytes remaining for this data transfer + */ + if ((status == SCI_SUCCESS) && + (stp_req->type.pio.pio_transfer_bytes == 0)) { + if ((stp_req->type.pio.ending_status & + ATA_BUSY) == 0) { scic_sds_request_set_status( - &sci_req->parent, + &stp_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); + SCI_FAILURE_IO_RESPONSE_VALID); sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &stp_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); } else { sci_base_state_machine_change_state( - &request->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); + &sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); } } } else { - dev_err(scic_to_dev(request->owning_controller), + dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC PIO Request 0x%p received frame %d " "with fis type 0x%02x when expecting a data " "fis.\n", __func__, - sci_req, + stp_req, frame_index, frame_header->fis_type); scic_sds_request_set_status( - &sci_req->parent, + &stp_req->parent, SCU_TASK_DONE_GOOD, - SCI_FAILURE_IO_REQUIRES_SCSI_ABORT - ); + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); sci_base_state_machine_change_state( - &sci_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + &stp_req->parent.state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); /* Frame is decoded return it to the controller */ scic_sds_controller_release_frame( - sci_req->parent.owning_controller, - frame_index - ); + stp_req->parent.owning_controller, + frame_index); } } else - dev_err(scic_to_dev(request->owning_controller), + dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, sci_req, frame_index, status); + __func__, stp_req, frame_index, status); return status; } @@ -1094,10 +1091,10 @@ static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_com struct scic_sds_request *sci_req, u32 completion_code) { - enum sci_status status = SCI_SUCCESS; - bool all_frames_transferred = false; - - struct scic_sds_stp_request *stp_req = (struct scic_sds_stp_request *)sci_req; + enum sci_status status = SCI_SUCCESS; + bool all_frames_transferred = false; + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): @@ -1279,11 +1276,12 @@ static const struct sci_base_state scic_sds_stp_request_started_pio_substate_tab } }; -enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, - u8 sat_protocol, - bool copy_rx_frame) +enum sci_status +scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, + bool copy_rx_frame) { - struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; scic_sds_stp_non_ncq_request_construct(sci_req); @@ -1297,7 +1295,6 @@ enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_ pio->request_current.sgl_offset = 0; pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; - pio->sat_protocol = sat_protocol; if (copy_rx_frame) { scic_sds_request_build_sgl(sci_req); @@ -1340,30 +1337,25 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler( u32 frame_index) { enum sci_status status; - struct sata_fis_header *frame_header; + struct dev_to_host_fis *frame_header; u32 *frame_buffer; status = scic_sds_unsolicited_frame_control_get_header( &sci_req->owning_controller->uf_control, frame_index, - (void **)&frame_header - ); + (void **)&frame_header); - if ( - (status == SCI_SUCCESS) - && (frame_header->fis_type == SATA_FIS_TYPE_REGD2H) - ) { + if ((status == SCI_SUCCESS) && + (frame_header->fis_type == FIS_REGD2H)) { scic_sds_unsolicited_frame_control_get_buffer( &sci_req->owning_controller->uf_control, frame_index, - (void **)&frame_buffer - ); + (void **)&frame_buffer); scic_sds_controller_copy_sata_response( &((struct scic_sds_stp_request *)sci_req)->d2h_reg_fis, (u32 *)frame_header, - frame_buffer - ); + frame_buffer); } scic_sds_controller_release_frame( @@ -1399,7 +1391,7 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi /* * We must check ther response buffer to see if the D2H Register FIS was * received before we got the TC completion. */ - if (sci_req->d2h_reg_fis.fis_type == SATA_FIS_TYPE_REGD2H) { + if (sci_req->d2h_reg_fis.fis_type == FIS_REGD2H) { scic_sds_remote_device_suspend( sci_req->parent.target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)) @@ -1648,35 +1640,34 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( u32 frame_index) { enum sci_status status; - struct sata_fis_header *frame_header; + struct dev_to_host_fis *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *stp_req = + (struct scic_sds_stp_request *)request; status = scic_sds_unsolicited_frame_control_get_header( - &(sci_req->parent.owning_controller->uf_control), + &(stp_req->parent.owning_controller->uf_control), frame_index, - (void **)&frame_header - ); + (void **)&frame_header); if (status == SCI_SUCCESS) { switch (frame_header->fis_type) { - case SATA_FIS_TYPE_REGD2H: + case FIS_REGD2H: scic_sds_unsolicited_frame_control_get_buffer( - &(sci_req->parent.owning_controller->uf_control), + &(stp_req->parent.owning_controller->uf_control), frame_index, - (void **)&frame_buffer - ); + (void **)&frame_buffer); scic_sds_controller_copy_sata_response( - &sci_req->d2h_reg_fis, (u32 *)frame_header, frame_buffer - ); + &stp_req->d2h_reg_fis, + (u32 *)frame_header, + frame_buffer); /* The command has completed with error */ scic_sds_request_set_status( - &sci_req->parent, + &stp_req->parent, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); + SCI_FAILURE_IO_RESPONSE_VALID); break; default: @@ -1684,30 +1675,28 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( "%s: IO Request:0x%p Frame Id:%d protocol " "violation occurred\n", __func__, - sci_req, + stp_req, frame_index); scic_sds_request_set_status( - &sci_req->parent, + &stp_req->parent, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION - ); + SCI_FAILURE_PROTOCOL_VIOLATION); break; } sci_base_state_machine_change_state( - &sci_req->parent.state_machine, + &stp_req->parent.state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame( - sci_req->parent.owning_controller, frame_index - ); + stp_req->parent.owning_controller, frame_index); } else dev_err(scic_to_dev(request->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", - __func__, sci_req, frame_index, status); + __func__, stp_req, frame_index, status); return status; } @@ -1798,7 +1787,8 @@ static const struct sci_base_state scic_sds_stp_request_started_soft_reset_subst enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req) { - struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); scic_sds_stp_non_ncq_request_construct(sci_req); diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index 807bc4e..50cb48e 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -57,7 +57,7 @@ #define _SCIC_SDS_STP_REQUEST_T_ #include -#include "intel_sata.h" +#include #include "scic_sds_request.h" /** @@ -111,11 +111,6 @@ struct scic_sds_stp_request { */ u8 ending_error; - /** - * Protocol Type. This is filled in by core during IO Request construction type. - */ - u8 sat_protocol; - struct scic_sds_request_pio_sgl { struct scu_sgl_element_pair *sgl_pair; u8 sgl_set; @@ -173,7 +168,6 @@ u32 scic_sds_stp_request_get_object_size(void); enum sci_status scic_sds_stp_pio_request_construct( struct scic_sds_request *scic_io_request, - u8 sat_protocol, bool copy_rx_frame); enum sci_status scic_sds_stp_udma_request_construct( diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index a23ebe8..e766b27 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -53,7 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "intel_sas.h" -#include "intel_ata.h" +#include "sas.h" #include "isci.h" #include "port.h" #include "remote_device.h" @@ -327,7 +327,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi break; } case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: { - struct sata_fis_header *hdr; + struct dev_to_host_fis *hdr; status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, frame_index, @@ -335,14 +335,14 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi if (status != SCI_SUCCESS) return status; - if (hdr->fis_type == SATA_FIS_TYPE_SETDEVBITS && - (hdr->status & ATA_STATUS_REG_ERROR_BIT)) { + if (hdr->fis_type == FIS_SETDEVBITS && + (hdr->status & ATA_ERR)) { sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; /* TODO Check sactive and complete associated IO if any. */ sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); - } else if (hdr->fis_type == SATA_FIS_TYPE_REGD2H && - (hdr->status & ATA_STATUS_REG_ERROR_BIT)) { + } else if (hdr->fis_type == FIS_REGD2H && + (hdr->status & ATA_ERR)) { /* * Some devices return D2H FIS when an NCQ error is detected. * Treat this like an SDB error FIS ready reason. @@ -469,6 +469,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic struct sci_base_state_machine *sm = &sci_dev->state_machine; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_port *sci_port = sci_dev->owning_port; + struct isci_request *ireq = sci_req->ireq; enum sci_status status; switch (state) { @@ -510,6 +511,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic * substate. */ enum scic_sds_remote_device_states new_state; + struct sas_task *task = isci_request_access_task(ireq); status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); if (status != SCI_SUCCESS) @@ -523,7 +525,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic if (status != SCI_SUCCESS) break; - if (isci_sata_get_sat_protocol(sci_req->ireq) == SAT_PROTOCOL_FPDMA) + if (task->ata_task.use_ncq) new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ; else { sci_dev->working_request = sci_req; @@ -532,8 +534,10 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic sci_base_state_machine_change_state(sm, new_state); break; } - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: - if (isci_sata_get_sat_protocol(sci_req->ireq) == SAT_PROTOCOL_FPDMA) { + case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: { + struct sas_task *task = isci_request_access_task(ireq); + + if (task->ata_task.use_ncq) { status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); if (status != SCI_SUCCESS) return status; @@ -546,6 +550,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic } else return SCI_FAILURE_INVALID_STATE; break; + } case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h new file mode 100644 index 0000000..05af8bd --- /dev/null +++ b/drivers/scsi/isci/sas.h @@ -0,0 +1,72 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_SAS_H_ +#define _SCI_SAS_H_ +/* + * SATA FIS Types These constants depict the various SATA FIS types devined in + * the serial ATA specification. + * XXX: This needs to go into + */ +#define FIS_REGH2D 0x27 +#define FIS_REGD2H 0x34 +#define FIS_SETDEVBITS 0xA1 +#define FIS_DMA_ACTIVATE 0x39 +#define FIS_DMA_SETUP 0x41 +#define FIS_BIST_ACTIVATE 0x58 +#define FIS_PIO_SETUP 0x5F +#define FIS_DATA 0x46 + +#endif diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 0837450..a08fcf5 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -61,11 +61,6 @@ #include "task.h" #include "request.h" #include "sata.h" -#include "intel_sat.h" -#include "intel_ata.h" - -static u8 isci_sata_get_management_task_protocol(struct isci_tmf *tmf); - /** * isci_sata_task_to_fis_copy() - This function gets the host_to_dev_fis from @@ -158,7 +153,7 @@ void isci_request_process_stp_response(struct sas_task *task, * If the device fault bit is set in the status register, then * set the sense data and return. */ - if (d2h_reg_fis->status & ATA_STATUS_REG_DEVICE_FAULT_BIT) + if (d2h_reg_fis->status & ATA_DF) ts->stat = SAS_PROTO_RESPONSE; else ts->stat = SAM_STAT_GOOD; @@ -166,74 +161,6 @@ void isci_request_process_stp_response(struct sas_task *task, ts->resp = SAS_TASK_COMPLETE; } -/** - * isci_sata_get_sat_protocol() - retrieve the sat protocol for the request - * @isci_request: ata request - * - * Note: temporary implementation until expert mode removes the callback - * - */ -u8 isci_sata_get_sat_protocol(struct isci_request *isci_request) -{ - struct sas_task *task; - struct domain_device *dev; - - dev_dbg(&isci_request->isci_host->pdev->dev, - "%s: isci_request = %p, ttype = %d\n", - __func__, isci_request, isci_request->ttype); - - if (tmf_task == isci_request->ttype) { - struct isci_tmf *tmf = isci_request_access_tmf(isci_request); - - return isci_sata_get_management_task_protocol(tmf); - } - - task = isci_request_access_task(isci_request); - dev = task->dev; - - if (!sas_protocol_ata(task->task_proto)) { - WARN(1, "unhandled task protocol\n"); - return SAT_PROTOCOL_NON_DATA; - } - - if (task->data_dir == DMA_NONE) - return SAT_PROTOCOL_NON_DATA; - - /* the "_IN" protocol types are equivalent to their "_OUT" - * analogs as far as the core is concerned - */ - if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) { - if (task->ata_task.dma_xfer) - return SAT_PROTOCOL_PACKET_DMA_DATA_IN; - else - return SAT_PROTOCOL_PACKET_PIO_DATA_IN; - } - - if (task->ata_task.use_ncq) - return SAT_PROTOCOL_FPDMA; - - if (task->ata_task.dma_xfer) - return SAT_PROTOCOL_UDMA_DATA_IN; - else - return SAT_PROTOCOL_PIO_DATA_IN; -} - -static u8 isci_sata_get_management_task_protocol( - struct isci_tmf *tmf) -{ - u8 ret = 0; - - pr_warn("tmf = %p, func = %d\n", tmf, tmf->tmf_code); - - if ((tmf->tmf_code == isci_tmf_sata_srst_high) || - (tmf->tmf_code == isci_tmf_sata_srst_low)) { - pr_warn("%s: tmf->tmf_code == TMF_LU_RESET\n", __func__); - ret = SAT_PROTOCOL_SOFT_RESET; - } - - return ret; -} - enum sci_status isci_sata_management_task_request_build( struct isci_request *isci_request) { diff --git a/drivers/scsi/isci/sata.h b/drivers/scsi/isci/sata.h index b6ba25b..1b89f1f 100644 --- a/drivers/scsi/isci/sata.h +++ b/drivers/scsi/isci/sata.h @@ -53,10 +53,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "intel_sat.h" - - - struct host_to_dev_fis *isci_sata_task_to_fis_copy( struct sas_task *task); -- cgit v0.10.2 From 4b7ebd05fc074ac2ffdc803232d83f3593d4f548 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 15:37:52 -0700 Subject: isci: Convert SAS identify address frame to Linux Native format Convert struct sci_sas_identify_address_frame to struct sas_identify_frame Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index 119eb5b..61a5ece 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -112,35 +112,6 @@ struct sci_sas_identify_address_frame_protocols { }; /** - * struct sci_sas_identify_address_frame - This structure depicts the contents - * of the SAS IDENTIFY ADDRESS FRAME (IAF). - * - * For specific information on each of these individual fields please reference - * the SAS specification Link layer section on address frames. - */ -struct sci_sas_identify_address_frame { - u16 address_frame_type:4; - u16 device_type:3; - u16 reserved1:1; - u16 reason:4; - u16 reserved2:4; - - struct sci_sas_identify_address_frame_protocols protocols; - - struct sci_sas_address device_name; - struct sci_sas_address sas_address; - - u32 phy_identifier:8; - u32 break_reply_capable:1; - u32 requested_in_zpsds:1; - u32 in_zpsds_persistent:1; - u32 reserved5:21; - - u32 reserved6[4]; - -}; - -/** * struct sas_capabilities - This structure depicts the various SAS * capabilities supported by the directly attached target device. For * specific information on each of these individual fields please reference diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index d8c4bf1..4e4a6b1 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -119,7 +119,7 @@ struct scic_sas_phy_properties { * This field delineates the Identify Address Frame received * from the remote end point. */ - struct sci_sas_identify_address_frame received_iaf; + struct sas_identify_frame rcvd_iaf; /** * This field delineates the Phy capabilities structure received diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 0f292f1..672e81b 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -411,15 +411,7 @@ static void scic_sds_phy_suspend( SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } -/** - * - * @sci_phy: The phy object to resume. - * - * This function will perform the register reads/writes required to resume the - * SCU hardware protocol engine. none - */ -void scic_sds_phy_resume( - struct scic_sds_phy *sci_phy) +void scic_sds_phy_resume(struct scic_sds_phy *sci_phy) { u32 scu_sas_pcfg_value; @@ -430,47 +422,22 @@ void scic_sds_phy_resume( &sci_phy->link_layer_registers->phy_configuration); } -/** - * This method returns the local sas address assigned to this phy. - * @sci_phy: This parameter specifies the phy for which to retrieve the local - * SAS address. - * @sas_address: This parameter specifies the location into which to copy the - * local SAS address. - * - */ -void scic_sds_phy_get_sas_address( - struct scic_sds_phy *sci_phy, - struct sci_sas_address *sas_address) +void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy, + struct sci_sas_address *sas_address) { sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high); sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low); } -/** - * This method returns the remote end-point (i.e. attached) sas address - * assigned to this phy. - * @sci_phy: This parameter specifies the phy for which to retrieve the remote - * end-point SAS address. - * @sas_address: This parameter specifies the location into which to copy the - * remote end-point SAS address. - * - */ -void scic_sds_phy_get_attached_sas_address( - struct scic_sds_phy *sci_phy, - struct sci_sas_address *sas_address) +void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, + struct sci_sas_address *sas_address) { - sas_address->high - = sci_phy->phy_type.sas.identify_address_frame_buffer.sas_address.high; - sas_address->low - = sci_phy->phy_type.sas.identify_address_frame_buffer.sas_address.low; + struct sas_identify_frame *iaf; + + iaf = &sci_phy->phy_type.sas.identify_address_frame_buffer; + memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); } -/** - * This method returns the supported protocols assigned to this phy - * @sci_phy: - * - * - */ void scic_sds_phy_get_protocols( struct scic_sds_phy *sci_phy, struct sci_sas_identify_address_frame_protocols *protocols) @@ -481,17 +448,6 @@ void scic_sds_phy_get_protocols( 0x0000FFFF); } -/** - * - * @sci_phy: The parameter is the phy object for which the attached phy - * protcols are to be returned. - * - * This method returns the supported protocols for the attached phy. If this - * is a SAS phy the protocols are returned from the identify address frame. If - * this is a SATA phy then protocols are made up and the target phy is an STP - * target phy. The caller will get the entire set of bits for the protocol - * value. - */ void scic_sds_phy_get_attached_phy_protocols( struct scic_sds_phy *sci_phy, struct sci_sas_identify_address_frame_protocols *protocols) @@ -499,8 +455,10 @@ void scic_sds_phy_get_attached_phy_protocols( protocols->u.all = 0; if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - protocols->u.all = - sci_phy->phy_type.sas.identify_address_frame_buffer.protocols.u.all; + struct sas_identify_frame *iaf; + + iaf = &sci_phy->phy_type.sas.identify_address_frame_buffer; + memcpy(&protocols->u.all, &iaf->initiator_bits, 2); } else if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { protocols->u.bits.stp_target = 1; } @@ -599,11 +557,9 @@ enum sci_status scic_sas_phy_get_properties( struct scic_sas_phy_properties *properties) { if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - memcpy( - &properties->received_iaf, - &sci_phy->phy_type.sas.identify_address_frame_buffer, - sizeof(struct sci_sas_identify_address_frame) - ); + memcpy(&properties->rcvd_iaf, + &sci_phy->phy_type.sas.identify_address_frame_buffer, + sizeof(struct sas_identify_frame)); properties->received_capabilities.u.all = readl(&sci_phy->link_layer_registers->receive_phycap); @@ -1203,7 +1159,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler { enum sci_status result; u32 *frame_words; - struct sci_sas_identify_address_frame *identify_frame; + struct sas_identify_frame *identify_frame; result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_phy_get_controller(sci_phy)->uf_control), @@ -1215,9 +1171,9 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler } frame_words[0] = SCIC_SWAP_DWORD(frame_words[0]); - identify_frame = (struct sci_sas_identify_address_frame *)frame_words; + identify_frame = (struct sas_identify_frame *)frame_words; - if (identify_frame->address_frame_type == 0) { + if (identify_frame->frame_type == 0) { u32 state; /* Byte swap the rest of the frame so we can make @@ -1231,9 +1187,9 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler memcpy(&sci_phy->phy_type.sas.identify_address_frame_buffer, identify_frame, - sizeof(struct sci_sas_identify_address_frame)); + sizeof(struct sas_identify_frame)); - if (identify_frame->protocols.u.bits.smp_target) { + if (identify_frame->smp_tport) { /* We got the IAF for an expander PHY go to the final state since * there are no power requirements for expander phys. */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 22b3119..7bf95539 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -274,7 +274,7 @@ struct scic_sds_phy { union { struct { - struct sci_sas_identify_address_frame identify_address_frame_buffer; + struct sas_identify_frame identify_address_frame_buffer; } sas; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 3fe1a8a..3100fd8 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -80,7 +80,7 @@ struct isci_phy { u8 sas_addr[SAS_ADDR_SIZE]; union { - u8 aif[sizeof(struct sci_sas_identify_address_frame)]; + struct sas_identify_frame iaf; struct dev_to_host_fis fis; } frame_rcvd; }; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 5b38f2f..0a15773 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -236,18 +236,12 @@ void isci_port_link_up( BUG_ON(call_status != SCI_SUCCESS); - memcpy(isci_phy->frame_rcvd.aif, - &(sas_phy_properties.received_iaf), - sizeof(struct sci_sas_identify_address_frame)); - - isci_phy->sas_phy.frame_rcvd_size - = sizeof(struct sci_sas_identify_address_frame); + isci_phy->frame_rcvd.iaf = sas_phy_properties.rcvd_iaf; + isci_phy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame); /* Copy the attached SAS address from the IAF */ memcpy(isci_phy->sas_phy.attached_sas_addr, - ((struct sas_identify_frame *) - (&isci_phy->frame_rcvd.aif))->sas_addr, - SAS_ADDR_SIZE); + isci_phy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE); } else { dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__); -- cgit v0.10.2 From 1dea554fce698b7e8ad03cab1525f41cd6c28092 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 16:13:17 -0700 Subject: isci: Collapsing of phy_type data structure Collapsing of struct scic_sds_phy phy_type data structure Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 672e81b..0e381cf 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -434,7 +434,7 @@ void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, { struct sas_identify_frame *iaf; - iaf = &sci_phy->phy_type.sas.identify_address_frame_buffer; + iaf = &sci_phy->phy_type.sas_id_frame; memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); } @@ -457,7 +457,7 @@ void scic_sds_phy_get_attached_phy_protocols( if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { struct sas_identify_frame *iaf; - iaf = &sci_phy->phy_type.sas.identify_address_frame_buffer; + iaf = &sci_phy->phy_type.sas_id_frame; memcpy(&protocols->u.all, &iaf->initiator_bits, 2); } else if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { protocols->u.bits.stp_target = 1; @@ -558,7 +558,7 @@ enum sci_status scic_sas_phy_get_properties( { if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { memcpy(&properties->rcvd_iaf, - &sci_phy->phy_type.sas.identify_address_frame_buffer, + &sci_phy->phy_type.sas_id_frame, sizeof(struct sas_identify_frame)); properties->received_capabilities.u.all = @@ -577,7 +577,7 @@ enum sci_status scic_sata_phy_get_properties( { if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { memcpy(&properties->signature_fis, - &sci_phy->phy_type.sata.signature_fis_buffer, + &sci_phy->phy_type.sata_sig_fis, sizeof(struct dev_to_host_fis)); /* / @todo add support for port selectors. */ @@ -1185,7 +1185,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler frame_words[4] = SCIC_SWAP_DWORD(frame_words[4]); frame_words[5] = SCIC_SWAP_DWORD(frame_words[5]); - memcpy(&sci_phy->phy_type.sas.identify_address_frame_buffer, + memcpy(&sci_phy->phy_type.sas_id_frame, identify_frame, sizeof(struct sas_identify_frame)); @@ -1253,7 +1253,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle (void **)&fis_frame_data); scic_sds_controller_copy_sata_response( - &sci_phy->phy_type.sata.signature_fis_buffer, + &sci_phy->phy_type.sata_sig_fis, frame_header, fis_frame_data); diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 7bf95539..47b2194 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -273,16 +273,8 @@ struct scic_sds_phy { bool is_in_link_training; union { - struct { - struct sas_identify_frame identify_address_frame_buffer; - - } sas; - - struct { - struct dev_to_host_fis signature_fis_buffer; - - } sata; - + struct sas_identify_frame sas_id_frame; + struct dev_to_host_fis sata_sig_fis; } phy_type; /** -- cgit v0.10.2 From ed0e24830e7b744d0d0ae5936740f1cdbd0ec5ba Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 16:16:44 -0700 Subject: isci: renaming sas_capabilities to scic_phy_cap This seems to be a data structure that represents the phy capabilities register from the hardware and has nothing to do with SAS data structs. Moving and fixup Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index 61a5ece..91c30cf 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -112,42 +112,6 @@ struct sci_sas_identify_address_frame_protocols { }; /** - * struct sas_capabilities - This structure depicts the various SAS - * capabilities supported by the directly attached target device. For - * specific information on each of these individual fields please reference - * the SAS specification Phy layer section on speed negotiation windows. - * - * - */ -struct sas_capabilities { - union { - struct { - /** - * The SAS specification indicates the start bit shall always be set to - * 1. This implementation will have the start bit set to 0 if the - * PHY CAPABILITIES were either not received or speed negotiation failed. - */ - u32 start:1; - u32 tx_ssc_type:1; - u32 reserved1:2; - u32 requested_logical_link_rate:4; - - u32 gen1_without_ssc_supported:1; - u32 gen1_with_ssc_supported:1; - u32 gen2_without_ssc_supported:1; - u32 gen2_with_ssc_supported:1; - u32 gen3_without_ssc_supported:1; - u32 gen3_with_ssc_supported:1; - u32 reserved2:17; - u32 parity:1; - } bits; - - u32 all; - } u; - -}; - -/** * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS * specification defined task attribute values for a command information * unit. diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 4e4a6b1..8fcd3a4 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -75,6 +75,34 @@ struct scic_sds_port; enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy); +struct scic_phy_cap { + union { + struct { + /* + * The SAS specification indicates the start bit shall + * always be set to + * 1. This implementation will have the start bit set + * to 0 if the PHY CAPABILITIES were either not + * received or speed negotiation failed. + */ + u8 start:1; + u8 tx_ssc_type:1; + u8 res1:2; + u8 req_logical_linkrate:4; + + u32 gen1_no_ssc:1; + u32 gen1_ssc:1; + u32 gen2_no_ssc:1; + u32 gen2_ssc:1; + u32 gen3_no_ssc:1; + u32 gen3_ssc:1; + u32 res2:17; + u32 parity:1; + }; + u32 all; + }; +} __packed; + /** * struct scic_phy_properties - This structure defines the properties common to * all phys that can be retrieved. @@ -125,7 +153,7 @@ struct scic_sas_phy_properties { * This field delineates the Phy capabilities structure received * from the remote end point. */ - struct sas_capabilities received_capabilities; + struct scic_phy_cap rcvd_cap; }; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 0e381cf..bd2b305 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -122,12 +122,15 @@ static enum sci_status scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, struct scu_link_layer_registers __iomem *link_layer_registers) { - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + struct scic_sds_controller *scic = + sci_phy->owning_port->owning_controller; int phy_idx = sci_phy->phy_index; - struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx]; - struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx]; + struct sci_phy_user_params *phy_user = + &scic->user_parameters.sds1.phys[phy_idx]; + struct sci_phy_oem_params *phy_oem = + &scic->oem_parameters.sds1.phys[phy_idx]; u32 phy_configuration; - struct sas_capabilities phy_capabilities; + struct scic_phy_cap phy_cap; u32 parity_check = 0; u32 parity_count = 0; u32 llctl, link_rate; @@ -146,7 +149,8 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, &sci_phy->link_layer_registers->transmit_identification); /* Write the device SAS Address */ - writel(0xFEDCBA98, &sci_phy->link_layer_registers->sas_device_name_high); + writel(0xFEDCBA98, + &sci_phy->link_layer_registers->sas_device_name_high); writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); /* Write the source SAS Address */ @@ -170,21 +174,21 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, &sci_phy->link_layer_registers->phy_configuration); /* Configure the SNW capabilities */ - phy_capabilities.u.all = 0; - phy_capabilities.u.bits.start = 1; - phy_capabilities.u.bits.gen3_without_ssc_supported = 1; - phy_capabilities.u.bits.gen2_without_ssc_supported = 1; - phy_capabilities.u.bits.gen1_without_ssc_supported = 1; + phy_cap.all = 0; + phy_cap.start = 1; + phy_cap.gen3_no_ssc = 1; + phy_cap.gen2_no_ssc = 1; + phy_cap.gen1_no_ssc = 1; if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { - phy_capabilities.u.bits.gen3_with_ssc_supported = 1; - phy_capabilities.u.bits.gen2_with_ssc_supported = 1; - phy_capabilities.u.bits.gen1_with_ssc_supported = 1; + phy_cap.gen3_ssc = 1; + phy_cap.gen2_ssc = 1; + phy_cap.gen1_ssc = 1; } /* * The SAS specification indicates that the phy_capabilities that * are transmitted shall have an even parity. Calculate the parity. */ - parity_check = phy_capabilities.u.all; + parity_check = phy_cap.all; while (parity_check != 0) { if (parity_check & 0x1) parity_count++; @@ -195,10 +199,9 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, * If parity indicates there are an odd number of bits set, then * set the parity bit to 1 in the phy capabilities. */ if ((parity_count % 2) != 0) - phy_capabilities.u.bits.parity = 1; + phy_cap.parity = 1; - writel(phy_capabilities.u.all, - &sci_phy->link_layer_registers->phy_capabilities); + writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup @@ -561,7 +564,7 @@ enum sci_status scic_sas_phy_get_properties( &sci_phy->phy_type.sas_id_frame, sizeof(struct sas_identify_frame)); - properties->received_capabilities.u.all = + properties->rcvd_cap.all = readl(&sci_phy->link_layer_registers->receive_phycap); return SCI_SUCCESS; -- cgit v0.10.2 From 0cfa890e5a8a9e3b01b75c17a7856cf96e026e27 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 17:44:54 -0700 Subject: isci: Fixup SSP command IU and task IU Fixup of SSP command IU and SSP task IU to something that looks like Linux Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index 91c30cf..f7301aa 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -160,53 +160,6 @@ enum sci_sas_frame_type { SCI_SAS_TASK_FRAME = 0x16 }; -/** - * struct sci_ssp_command_iu - This structure depicts the contents of the SSP - * COMMAND INFORMATION UNIT. For specific information on each of these - * individual fields please reference the SAS specification SSP transport - * layer section. - * - * - */ -struct sci_ssp_command_iu { - u32 lun_upper; - u32 lun_lower; - - u32 additional_cdb_length:6; - u32 reserved0:2; - u32 reserved1:8; - u32 enable_first_burst:1; - u32 task_priority:4; - u32 task_attribute:3; - u32 reserved2:8; - - u32 cdb[4]; - -}; - -/** - * struct sci_ssp_task_iu - This structure depicts the contents of the SSP TASK - * INFORMATION UNIT. For specific information on each of these individual - * fields please reference the SAS specification SSP transport layer section. - * - * - */ -struct sci_ssp_task_iu { - u32 lun_upper; - u32 lun_lower; - - u32 reserved0:8; - u32 task_function:8; - u32 reserved1:8; - u32 reserved2:8; - - u32 reserved3:16; - u32 task_tag:16; - - u32 reserved4[3]; - -}; - #define SSP_RESPONSE_IU_MAX_DATA 64 #define SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK (0x03) diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 31df526..b6d1333 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -54,6 +54,7 @@ */ #include +#include "sas.h" #include "intel_sas.h" #include "scic_controller.h" #include "scic_io_request.h" @@ -98,7 +99,7 @@ */ #define scic_ssp_io_request_get_object_size() \ (\ - sizeof(struct sci_ssp_command_iu) \ + sizeof(struct ssp_cmd_iu) \ + sizeof(struct sci_ssp_response_iu) \ ) @@ -109,7 +110,7 @@ * memory */ #define scic_sds_ssp_request_get_command_buffer(memory) \ - ((struct sci_ssp_command_iu *)(\ + ((struct ssp_cmd_iu *)(\ ((char *)(memory)) + sizeof(struct scic_sds_request) \ )) @@ -122,7 +123,7 @@ #define scic_sds_ssp_request_get_response_buffer(memory) \ ((struct sci_ssp_response_iu *)(\ ((char *)(scic_sds_ssp_request_get_command_buffer(memory))) \ - + sizeof(struct sci_ssp_command_iu) \ + + sizeof(struct ssp_cmd_iu) \ )) /** @@ -158,7 +159,7 @@ */ #define scic_ssp_task_request_get_object_size() \ (\ - sizeof(struct sci_ssp_task_iu) \ + sizeof(struct ssp_task_iu) \ + sizeof(struct sci_ssp_response_iu) \ ) @@ -169,7 +170,7 @@ * memory. Yes its the same as the above macro except for the name. */ #define scic_sds_ssp_task_request_get_command_buffer(memory) \ - ((struct sci_ssp_task_iu *)(\ + ((struct ssp_task_iu *)(\ ((char *)(memory)) + sizeof(struct scic_sds_request) \ )) @@ -182,7 +183,7 @@ #define scic_sds_ssp_task_request_get_response_buffer(memory) \ ((struct sci_ssp_response_iu *)(\ ((char *)(scic_sds_ssp_task_request_get_command_buffer(memory))) \ - + sizeof(struct sci_ssp_task_iu) \ + + sizeof(struct ssp_task_iu) \ )) /** @@ -344,80 +345,49 @@ static void scic_sds_ssp_io_request_assign_buffers( } } -/** - * This method constructs the SSP Command IU data for this io request object. - * @sci_req: This parameter specifies the request object for which the SSP - * command information unit is being built. - * - */ -static void scic_sds_io_request_build_ssp_command_iu( - struct scic_sds_request *sds_request) +static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req) { - struct sci_ssp_command_iu *command_frame; - u32 cdb_length; - u32 *cdb_buffer; - struct isci_request *isci_request = sds_request->ireq; - - command_frame = - (struct sci_ssp_command_iu *)sds_request->command_buffer; - - command_frame->lun_upper = 0; - command_frame->lun_lower = - isci_request_ssp_io_request_get_lun(isci_request); - - ((u32 *)command_frame)[2] = 0; + struct ssp_cmd_iu *cmd_iu; + struct isci_request *ireq = sci_req->ireq; + struct sas_task *task = isci_request_access_task(ireq); - cdb_length = isci_request_ssp_io_request_get_cdb_length(isci_request); - cdb_buffer = (u32 *)isci_request_ssp_io_request_get_cdb_address( - isci_request); + cmd_iu = sci_req->command_buffer; - if (cdb_length > 16) { - command_frame->additional_cdb_length = cdb_length - 16; - } + memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8); + cmd_iu->add_cdb_len = 0; + cmd_iu->_r_a = 0; + cmd_iu->_r_b = 0; + cmd_iu->en_fburst = 0; /* unsupported */ + cmd_iu->task_prio = task->ssp_task.task_prio; + cmd_iu->task_attr = task->ssp_task.task_attr; + cmd_iu->_r_c = 0; - /* / @todo Is it ok to leave junk at the end of the cdb buffer? */ scic_word_copy_with_swap( - (u32 *)(&command_frame->cdb), - (u32 *)(cdb_buffer), - (cdb_length + 3) / sizeof(u32) - ); - - command_frame->enable_first_burst = 0; - command_frame->task_priority = - isci_request_ssp_io_request_get_command_priority(isci_request); - command_frame->task_attribute = - isci_request_ssp_io_request_get_task_attribute(isci_request); + (u32 *)(&cmd_iu->cdb), + (u32 *)task->ssp_task.cdb, + sizeof(task->ssp_task.cdb) / sizeof(u32)); } - -/** - * This method constructs the SSP Task IU data for this io request object. - * @sci_req: - * - */ -static void scic_sds_task_request_build_ssp_task_iu( - struct scic_sds_request *sds_request) +static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci_req) { - struct sci_ssp_task_iu *command_frame; - struct isci_request *isci_request = sds_request->ireq; + struct ssp_task_iu *task_iu; + struct isci_request *ireq = sci_req->ireq; + struct sas_task *task = isci_request_access_task(ireq); + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - command_frame = - (struct sci_ssp_task_iu *)sds_request->command_buffer; + task_iu = sci_req->command_buffer; - command_frame->lun_upper = 0; - command_frame->lun_lower = isci_request_ssp_io_request_get_lun( - isci_request); + memset(task_iu, 0, sizeof(struct ssp_task_iu)); - ((u32 *)command_frame)[2] = 0; + memcpy(task_iu->LUN, task->ssp_task.LUN, 8); - command_frame->task_function = - isci_task_ssp_request_get_function(isci_request); - command_frame->task_tag = - isci_task_ssp_request_get_io_tag_to_manage( - isci_request); + task_iu->task_func = isci_tmf->tmf_code; + task_iu->task_tag = + (ireq->ttype == tmf_task) ? + isci_tmf->io_tag : + SCI_CONTROLLER_INVALID_IO_TAG; } - /** * This method is will fill in the SCU Task Context for any type of SSP request. * @sci_req: @@ -533,7 +503,8 @@ static void scu_ssp_io_request_construct_task_context( scu_ssp_reqeust_construct_task_context(sci_req, task_context); - task_context->ssp_command_iu_length = sizeof(struct sci_ssp_command_iu) / sizeof(u32); + task_context->ssp_command_iu_length = + sizeof(struct ssp_cmd_iu) / sizeof(u32); task_context->type.ssp.frame_type = SCI_SAS_COMMAND_FRAME; switch (dir) { @@ -605,7 +576,8 @@ static void scu_ssp_task_request_construct_task_context( task_context->task_type = SCU_TASK_TYPE_RAW_FRAME; task_context->transfer_length_bytes = 0; task_context->type.ssp.frame_type = SCI_SAS_TASK_FRAME; - task_context->ssp_command_iu_length = sizeof(struct sci_ssp_task_iu) / sizeof(u32); + task_context->ssp_command_iu_length = + sizeof(struct ssp_task_iu) / sizeof(u32); } diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index c45e78e..501df3c 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -1241,124 +1241,3 @@ enum dma_data_direction isci_request_io_request_get_data_direction( return task->data_dir; } - -/** - * isci_request_sge_get_address_field() - This function is called by the sci - * core to retrieve the address field contents for a given sge. - * @request: This parameter is the isci_request object. - * @sge_address: This parameter is the sge. - * - * physical address in the specified sge. - */ - - -/** - * isci_request_sge_get_length_field() - This function is called by the sci - * core to retrieve the length field contents for a given sge. - * @request: This parameter is the isci_request object. - * @sge_address: This parameter is the sge. - * - * length field value in the specified sge. - */ - - -/** - * isci_request_ssp_io_request_get_cdb_address() - This function is called by - * the sci core to retrieve the cdb address for a given request. - * @request: This parameter is the isci_request object. - * - * cdb address for specified request. - */ -void *isci_request_ssp_io_request_get_cdb_address( - struct isci_request *request) -{ - struct sas_task *task = isci_request_access_task(request); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: request->task->ssp_task.cdb = %p\n", - __func__, - task->ssp_task.cdb); - return task->ssp_task.cdb; -} - - -/** - * isci_request_ssp_io_request_get_cdb_length() - This function is called by - * the sci core to retrieve the cdb length for a given request. - * @request: This parameter is the isci_request object. - * - * cdb length for specified request. - */ -u32 isci_request_ssp_io_request_get_cdb_length( - struct isci_request *request) -{ - return 16; -} - - -/** - * isci_request_ssp_io_request_get_lun() - This function is called by the sci - * core to retrieve the lun for a given request. - * @request: This parameter is the isci_request object. - * - * lun for specified request. - */ -u32 isci_request_ssp_io_request_get_lun( - struct isci_request *request) -{ - struct sas_task *task = isci_request_access_task(request); - -#ifdef DEBUG - int i; - - for (i = 0; i < 8; i++) - dev_dbg(&request->isci_host->pdev->dev, - "%s: task->ssp_task.LUN[%d] = %x\n", - __func__, i, task->ssp_task.LUN[i]); - -#endif - - return task->ssp_task.LUN[0]; -} - - -/** - * isci_request_ssp_io_request_get_task_attribute() - This function is called - * by the sci core to retrieve the task attribute for a given request. - * @request: This parameter is the isci_request object. - * - * task attribute for specified request. - */ -u32 isci_request_ssp_io_request_get_task_attribute( - struct isci_request *request) -{ - struct sas_task *task = isci_request_access_task(request); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: request->task->ssp_task.task_attr = %x\n", - __func__, - task->ssp_task.task_attr); - - return task->ssp_task.task_attr; -} - - -/** - * isci_request_ssp_io_request_get_command_priority() - This function is called - * by the sci core to retrieve the command priority for a given request. - * @request: This parameter is the isci_request object. - * - * command priority for specified request. - */ -u32 isci_request_ssp_io_request_get_command_priority( - struct isci_request *request) -{ - struct sas_task *task = isci_request_access_task(request); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: request->task->ssp_task.task_prio = %x\n", - __func__, - task->ssp_task.task_prio); - - return task->ssp_task.task_prio; -} diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h index 05af8bd..21ddd63 100644 --- a/drivers/scsi/isci/sas.h +++ b/drivers/scsi/isci/sas.h @@ -69,4 +69,38 @@ #define FIS_PIO_SETUP 0x5F #define FIS_DATA 0x46 +/* + * contents of the SSP COMMAND INFORMATION UNIT. + * For specific information on each of these individual fields please + * reference the SAS specification SSP transport layer section. + * XXX: This needs to go into + */ +struct ssp_cmd_iu { + u8 LUN[8]; + u8 add_cdb_len:6; + u8 _r_a:2; + u8 _r_b; + u8 en_fburst:1; + u8 task_prio:4; + u8 task_attr:3; + u8 _r_c; + + u8 cdb[16]; +} __packed; + +/* + * contents of the SSP TASK INFORMATION UNIT. + * For specific information on each of these individual fields please + * reference the SAS specification SSP transport layer section. + * XXX: This needs to go into + */ +struct ssp_task_iu { + u8 LUN[8]; + u8 _r_a; + u8 task_func; + u8 _r_b[4]; + u16 task_tag; + u8 _r_c[12]; +} __packed; + #endif diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index f9a1c41..c4db959 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1481,55 +1481,6 @@ void isci_task_request_complete( complete(tmf_complete); } - -/** - * isci_task_ssp_request_get_lun() - This function is called by the sci core to - * retrieve the lun for a given task request. - * @request: This parameter is the isci_request object. - * - * lun for specified task request. - */ - -/** - * isci_task_ssp_request_get_function() - This function is called by the sci - * core to retrieve the function for a given task request. - * @request: This parameter is the isci_request object. - * - * function code for specified task request. - */ -u8 isci_task_ssp_request_get_function(struct isci_request *request) -{ - struct isci_tmf *isci_tmf = isci_request_access_tmf(request); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: func = %d\n", __func__, isci_tmf->tmf_code); - - return isci_tmf->tmf_code; -} - -/** - * isci_task_ssp_request_get_io_tag_to_manage() - This function is called by - * the sci core to retrieve the io tag for a given task request. - * @request: This parameter is the isci_request object. - * - * io tag for specified task request. - */ -u16 isci_task_ssp_request_get_io_tag_to_manage(struct isci_request *request) -{ - u16 io_tag = SCI_CONTROLLER_INVALID_IO_TAG; - - if (tmf_task == request->ttype) { - struct isci_tmf *tmf = isci_request_access_tmf(request); - io_tag = tmf->io_tag; - } - - dev_dbg(&request->isci_host->pdev->dev, - "%s: request = %p, io_tag = %d\n", - __func__, request, io_tag); - - return io_tag; -} - /** * isci_task_ssp_request_get_response_data_address() - This function is called * by the sci core to retrieve the response data address for a given task -- cgit v0.10.2 From af5ae89350840b9d724fc4fb81d928673bffdd4d Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 17:53:24 -0700 Subject: isci: Convert of sci_ssp_response_iu to ssp_response_iu Converting to Linux native format. However the isci driver does a lot of the calculation based on the max size of this data structure and the Linux data structure only has a pointer to the response data. Thus the sizeof(struct ssp_response_iu) will be incorrect and we need to define the max size. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index f7301aa..3d4ca12 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -160,52 +160,6 @@ enum sci_sas_frame_type { SCI_SAS_TASK_FRAME = 0x16 }; -#define SSP_RESPONSE_IU_MAX_DATA 64 - -#define SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK (0x03) - - -#define sci_ssp_get_sense_data_length(sense_data_length_buffer) \ - SCIC_BUILD_DWORD(sense_data_length_buffer) - -#define sci_ssp_get_response_data_length(response_data_length_buffer) \ - SCIC_BUILD_DWORD(response_data_length_buffer) - -/** - * struct sci_ssp_response_iu - This structure depicts the contents of the SSP - * RESPONSE INFORMATION UNIT. For specific information on each of these - * individual fields please reference the SAS specification SSP transport - * layer section. - * - * - */ -struct sci_ssp_response_iu { - u8 reserved0[8]; - - u8 retry_delay_timer[2]; - u8 data_present; - u8 status; - - u8 reserved1[4]; - u8 sense_data_length[4]; - u8 response_data_length[4]; - - u32 data[SSP_RESPONSE_IU_MAX_DATA]; - -}; - -/** - * enum _SCI_SAS_DATA_PRESENT_TYPE - This enumeration depicts the SAS - * specification defined SSP data present types in struct sci_ssp_response_iu. - * - * - */ -enum sci_ssp_response_iu_data_present_type { - SCI_SSP_RESPONSE_IU_NO_DATA = 0x00, - SCI_SSP_RESPONSE_IU_RESPONSE_DATA = 0x01, - SCI_SSP_RESPONSE_IU_SENSE_DATA = 0x02 -}; - /** * struct sci_ssp_frame_header - This structure depicts the contents of an SSP * frame header. For specific information on the individual fields please diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index b6d1333..ef59e01 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -100,7 +100,7 @@ #define scic_ssp_io_request_get_object_size() \ (\ sizeof(struct ssp_cmd_iu) \ - + sizeof(struct sci_ssp_response_iu) \ + + SSP_RESP_IU_MAX_SIZE \ ) /** @@ -121,7 +121,7 @@ * memory */ #define scic_sds_ssp_request_get_response_buffer(memory) \ - ((struct sci_ssp_response_iu *)(\ + ((struct ssp_response_iu *)(\ ((char *)(scic_sds_ssp_request_get_command_buffer(memory))) \ + sizeof(struct ssp_cmd_iu) \ )) @@ -135,7 +135,7 @@ #define scic_sds_ssp_request_get_task_context_buffer(memory) \ ((struct scu_task_context *)(\ ((char *)(scic_sds_ssp_request_get_response_buffer(memory))) \ - + sizeof(struct sci_ssp_response_iu) \ + + SSP_RESP_IU_MAX_SIZE \ )) /** @@ -160,7 +160,7 @@ #define scic_ssp_task_request_get_object_size() \ (\ sizeof(struct ssp_task_iu) \ - + sizeof(struct sci_ssp_response_iu) \ + + SSP_RESP_IU_MAX_SIZE \ ) /** @@ -181,7 +181,7 @@ * request memory. */ #define scic_sds_ssp_task_request_get_response_buffer(memory) \ - ((struct sci_ssp_response_iu *)(\ + ((struct ssp_response_iu *)(\ ((char *)(scic_sds_ssp_task_request_get_command_buffer(memory))) \ + sizeof(struct ssp_task_iu) \ )) @@ -194,7 +194,7 @@ #define scic_sds_ssp_task_request_get_task_context_buffer(memory) \ ((struct scu_task_context *)(\ ((char *)(scic_sds_ssp_task_request_get_response_buffer(memory))) \ - + sizeof(struct sci_ssp_response_iu) \ + + SSP_RESP_IU_MAX_SIZE \ )) @@ -937,52 +937,29 @@ enum sci_status scic_sds_io_request_frame_handler( return SCI_FAILURE_INVALID_STATE; } -/** - * - * @sci_req: The SCIC_SDS_IO_REQUEST_T object for which the task start - * operation is to be executed. - * - * This method invokes the core state task complete handler for the - * SCIC_SDS_IO_REQUEST_T object. enum sci_status - */ - /* - * **************************************************************************** - * * SCIC SDS PROTECTED METHODS - * **************************************************************************** */ - -/** - * This method copies response data for requests returning response data + * This function copies response data for requests returning response data * instead of sense data. * @sci_req: This parameter specifies the request object for which to copy * the response data. - * */ -void scic_sds_io_request_copy_response(struct scic_sds_request *sds_request) +void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) { - void *response_buffer; - u32 user_response_length; - u32 core_response_length; - struct sci_ssp_response_iu *ssp_response; - struct isci_request *isci_request = sds_request->ireq; - - ssp_response = - (struct sci_ssp_response_iu *)sds_request->response_buffer; - - response_buffer = - isci_task_ssp_request_get_response_data_address( - isci_request); + void *resp_buf; + u32 len; + struct ssp_response_iu *ssp_response; + struct isci_request *ireq = sci_req->ireq; + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - user_response_length = - isci_task_ssp_request_get_response_data_length( - isci_request); + ssp_response = sci_req->response_buffer; - core_response_length = sci_ssp_get_response_data_length( - ssp_response->response_data_length); + resp_buf = &isci_tmf->resp.resp_iu; - user_response_length = min(user_response_length, core_response_length); + len = min_t(u32, + SSP_RESP_IU_MAX_SIZE, + be32_to_cpu(ssp_response->response_data_len)); - memcpy(response_buffer, ssp_response->data, user_response_length); + memcpy(resp_buf, ssp_response->resp_data, len); } /* @@ -1102,7 +1079,7 @@ enum sci_status scic_sds_request_started_state_abort_handler( return SCI_SUCCESS; } -/** +/* * scic_sds_request_started_state_tc_completion_handler() - This method process * TC (task context) completions for normal IO request (i.e. Task/Abort * Completions of type 0). This method will update the @@ -1113,50 +1090,51 @@ enum sci_status scic_sds_request_started_state_abort_handler( * the SCU. * */ -enum sci_status scic_sds_request_started_state_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) +enum sci_status +scic_sds_request_started_state_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) { - u8 data_present; - struct sci_ssp_response_iu *response_buffer; + u8 datapres; + struct ssp_response_iu *resp_iu; - /** - * @todo Any SDMA return code of other than 0 is bad + /* + * TODO: Any SDMA return code of other than 0 is bad * decode 0x003C0000 to determine SDMA status */ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): { /* - * There are times when the SCU hardware will return an early response - * because the io request specified more data than is returned by the - * target device (mode pages, inquiry data, etc.). We must check the - * response stats to see if this is truly a failed request or a good - * request that just got completed early. */ - struct sci_ssp_response_iu *response = (struct sci_ssp_response_iu *) - sci_req->response_buffer; + * There are times when the SCU hardware will return an early + * response because the io request specified more data than is + * returned by the target device (mode pages, inquiry data, + * etc.). We must check the response stats to see if this is + * truly a failed request or a good request that just got + * completed early. + */ + struct ssp_response_iu *resp = sci_req->response_buffer; scic_word_copy_with_swap( sci_req->response_buffer, sci_req->response_buffer, - sizeof(struct sci_ssp_response_iu) / sizeof(u32) - ); + SSP_RESP_IU_MAX_SIZE / sizeof(u32)); - if (response->status == 0) { + if (resp->status == 0) { scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY - ); + sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS_IO_DONE_EARLY); } else { scic_sds_request_set_status( sci_req, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); + SCI_FAILURE_IO_RESPONSE_VALID); } } break; @@ -1165,36 +1143,31 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( scic_word_copy_with_swap( sci_req->response_buffer, sci_req->response_buffer, - sizeof(struct sci_ssp_response_iu) / sizeof(u32) - ); + SSP_RESP_IU_MAX_SIZE / sizeof(u32)); scic_sds_request_set_status( sci_req, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); + SCI_FAILURE_IO_RESPONSE_VALID); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): /* - * / @todo With TASK_DONE_RESP_LEN_ERR is the response frame guaranteed - * / to be received before this completion status is posted? */ - response_buffer = - (struct sci_ssp_response_iu *)sci_req->response_buffer; - data_present = - response_buffer->data_present & SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK; - - if ((data_present == 0x01) || (data_present == 0x02)) { + * / @todo With TASK_DONE_RESP_LEN_ERR is the response frame + * guaranteed to be received before this completion status is + * posted? + */ + resp_iu = sci_req->response_buffer; + datapres = resp_iu->datapres; + + if ((datapres == 0x01) || (datapres == 0x02)) { scic_sds_request_set_status( sci_req, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); - } else { + SCI_FAILURE_IO_RESPONSE_VALID); + } else scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - } + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; /* only stp device gets suspended. */ @@ -1212,15 +1185,15 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( if (sci_req->protocol == SCIC_STP_PROTOCOL) { scic_sds_request_set_status( sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED - ); + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); } else { scic_sds_request_set_status( sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); } break; @@ -1237,9 +1210,9 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): scic_sds_request_set_status( sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED - ); + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); break; /* neither ssp nor stp gets suspended. */ @@ -1261,19 +1234,20 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( default: scic_sds_request_set_status( sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); break; } - /** - * @todo This is probably wrong for ACK/NAK timeout conditions + /* + * TODO: This is probably wrong for ACK/NAK timeout conditions */ - /* In all cases we will treat this as the completion of the IO request. */ - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + /* In all cases we will treat this as the completion of the IO req. */ + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } @@ -1285,49 +1259,42 @@ enum sci_status scic_sds_request_started_state_tc_completion_handler( * at completion time. If the frame type is not a response buffer an error is * logged. enum sci_status SCI_SUCCESS SCI_FAILURE_INVALID_PARAMETER_VALUE */ -static enum sci_status scic_sds_request_started_state_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) +static enum sci_status +scic_sds_request_started_state_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) { enum sci_status status; struct sci_ssp_frame_header *frame_header; - /* / @todo If this is a response frame we must record that we received it */ status = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, - (void **)&frame_header - ); + (void **)&frame_header); if (frame_header->frame_type == SCI_SAS_RESPONSE_FRAME) { - struct sci_ssp_response_iu *response_buffer; + struct ssp_response_iu *resp_iu; status = scic_sds_unsolicited_frame_control_get_buffer( &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, - (void **)&response_buffer - ); + (void **)&resp_iu); - scic_word_copy_with_swap( - sci_req->response_buffer, - (u32 *)response_buffer, - sizeof(struct sci_ssp_response_iu) - ); + scic_word_copy_with_swap(sci_req->response_buffer, + (u32 *)resp_iu, + SSP_RESP_IU_MAX_SIZE); - response_buffer = (struct sci_ssp_response_iu *)sci_req->response_buffer; + resp_iu = sci_req->response_buffer; - if ((response_buffer->data_present == 0x01) || - (response_buffer->data_present == 0x02)) { + if ((resp_iu->datapres == 0x01) || + (resp_iu->datapres == 0x02)) { scic_sds_request_set_status( sci_req, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); } else scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - } else + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); + } else { /* This was not a response frame why did it get forwarded? */ dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC IO Request 0x%p received unexpected " @@ -1336,13 +1303,14 @@ static enum sci_status scic_sds_request_started_state_frame_handler( sci_req, frame_index, frame_header->frame_type); + } /* * In any case we are done with this frame buffer return it to the - * controller */ + * controller + */ scic_sds_controller_release_frame( - sci_req->owning_controller, frame_index - ); + sci_req->owning_controller, frame_index); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index b3ad33b..8569dba 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -102,7 +102,7 @@ #define scic_sds_stp_request_get_task_context_buffer(memory) \ ((struct scu_task_context *)(\ ((char *)(scic_sds_stp_request_get_response_buffer(memory))) \ - + sizeof(struct sci_ssp_response_iu) \ + + SSP_RESP_IU_MAX_SIZE \ )) /** diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h index 21ddd63..1a1e9bc 100644 --- a/drivers/scsi/isci/sas.h +++ b/drivers/scsi/isci/sas.h @@ -69,6 +69,9 @@ #define FIS_PIO_SETUP 0x5F #define FIS_DATA 0x46 +/**************************************************************************/ +#define SSP_RESP_IU_MAX_SIZE 280 + /* * contents of the SSP COMMAND INFORMATION UNIT. * For specific information on each of these individual fields please diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c4db959..8449d8a 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -55,6 +55,7 @@ #include #include +#include "sas.h" #include "scic_task_request.h" #include "scic_io_request.h" #include "remote_device.h" @@ -63,7 +64,8 @@ #include "request.h" #include "sata.h" #include "task.h" -#include "core/scic_sds_request.h" +#include "scic_sds_stp_request.h" + /** * isci_task_refuse() - complete the request to the upper layer driver in * the case where an I/O needs to be completed back in the submit path. @@ -1411,109 +1413,75 @@ int isci_task_query_task( return TMF_RESP_FUNC_SUCC; } -/** +/* * isci_task_request_complete() - This function is called by the sci core when * an task request completes. - * @isci_host: This parameter specifies the ISCI host object - * @request: This parameter is the completed isci_request object. + * @ihost: This parameter specifies the ISCI host object + * @ireq: This parameter is the completed isci_request object. * @completion_status: This parameter specifies the completion status from the * sci core. * * none. */ -void isci_task_request_complete( - struct isci_host *isci_host, - struct isci_request *request, - enum sci_task_status completion_status) +void +isci_task_request_complete(struct isci_host *ihost, + struct isci_request *ireq, + enum sci_task_status completion_status) { - struct isci_remote_device *isci_device = request->isci_device; + struct isci_remote_device *idev = ireq->isci_device; enum isci_request_status old_state; - struct isci_tmf *tmf = isci_request_access_tmf(request); + struct isci_tmf *tmf = isci_request_access_tmf(ireq); struct completion *tmf_complete; + struct scic_sds_request *sci_req = ireq->sci_request_handle; + struct scic_sds_stp_request *stp_req = + container_of(sci_req, typeof(*stp_req), parent); - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: request = %p, status=%d\n", - __func__, request, completion_status); + __func__, ireq, completion_status); - old_state = isci_request_change_state(request, completed); + old_state = isci_request_change_state(ireq, completed); tmf->status = completion_status; - request->complete_in_target = true; - - if (SAS_PROTOCOL_SSP == tmf->proto) { + ireq->complete_in_target = true; + if (tmf->proto == SAS_PROTOCOL_SSP) { memcpy(&tmf->resp.resp_iu, - scic_io_request_get_response_iu_address( - request->sci_request_handle - ), - sizeof(struct sci_ssp_response_iu)); - - } else if (SAS_PROTOCOL_SATA == tmf->proto) { - + sci_req->response_buffer, + SSP_RESP_IU_MAX_SIZE); + } else if (tmf->proto == SAS_PROTOCOL_SATA) { memcpy(&tmf->resp.d2h_fis, - scic_stp_io_request_get_d2h_reg_address( - request->sci_request_handle), + &stp_req->d2h_reg_fis, sizeof(struct dev_to_host_fis)); } /* Manage the timer if it is still running. */ if (tmf->timeout_timer) { - isci_del_timer(isci_host, tmf->timeout_timer); + isci_del_timer(ihost, tmf->timeout_timer); tmf->timeout_timer = NULL; } /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; - scic_controller_complete_io( - isci_host->core_controller, - &isci_device->sci, - request->sci_request_handle); - /* NULL the request handle to make sure it cannot be terminated + scic_controller_complete_io(ihost->core_controller, + &idev->sci, + ireq->sci_request_handle); + + /* + * NULL the request handle to make sure it cannot be terminated * or completed again. */ - request->sci_request_handle = NULL; + ireq->sci_request_handle = NULL; - isci_request_change_state(request, unallocated); - list_del_init(&request->dev_node); + isci_request_change_state(ireq, unallocated); + list_del_init(&ireq->dev_node); /* The task management part completes last. */ complete(tmf_complete); } /** - * isci_task_ssp_request_get_response_data_address() - This function is called - * by the sci core to retrieve the response data address for a given task - * request. - * @request: This parameter is the isci_request object. - * - * response data address for specified task request. - */ -void *isci_task_ssp_request_get_response_data_address( - struct isci_request *request) -{ - struct isci_tmf *isci_tmf = isci_request_access_tmf(request); - - return &isci_tmf->resp.resp_iu; -} - -/** - * isci_task_ssp_request_get_response_data_length() - This function is called - * by the sci core to retrieve the response data length for a given task - * request. - * @request: This parameter is the isci_request object. - * - * response data length for specified task request. - */ -u32 isci_task_ssp_request_get_response_data_length( - struct isci_request *request) -{ - struct isci_tmf *isci_tmf = isci_request_access_tmf(request); - - return sizeof(isci_tmf->resp.resp_iu); -} - -/** * isci_bus_reset_handler() - This function performs a target reset of the * device referenced by "cmd'. This function is exported through the * "struct scsi_host_template" structure such that it is called when an I/O diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index c5afd1c..77cc54d 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -99,7 +99,7 @@ struct isci_tmf { struct completion *complete; enum sas_protocol proto; union { - struct sci_ssp_response_iu resp_iu; + struct ssp_response_iu resp_iu; struct dev_to_host_fis d2h_fis; } resp; unsigned char lun[8]; @@ -120,8 +120,7 @@ struct isci_tmf { }; -static inline void isci_print_tmf( - struct isci_tmf *tmf) +static inline void isci_print_tmf(struct isci_tmf *tmf) { if (SAS_PROTOCOL_SATA == tmf->proto) dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, @@ -144,16 +143,13 @@ static inline void isci_print_tmf( "tmf->resp.resp_iu.data[3] = %x\n", __func__, tmf->status, - tmf->resp.resp_iu.data_present, + tmf->resp.resp_iu.datapres, tmf->resp.resp_iu.status, - (tmf->resp.resp_iu.response_data_length[0] << 24) + - (tmf->resp.resp_iu.response_data_length[1] << 16) + - (tmf->resp.resp_iu.response_data_length[2] << 8) + - tmf->resp.resp_iu.response_data_length[3], - tmf->resp.resp_iu.data[0], - tmf->resp.resp_iu.data[1], - tmf->resp.resp_iu.data[2], - tmf->resp.resp_iu.data[3]); + be32_to_cpu(tmf->resp.resp_iu.response_data_len), + tmf->resp.resp_iu.resp_data[0], + tmf->resp.resp_iu.resp_data[1], + tmf->resp.resp_iu.resp_data[2], + tmf->resp.resp_iu.resp_data[3]); } -- cgit v0.10.2 From 2ec53eb4d5b301e5c9c386da5685894d572772a5 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 18:01:22 -0700 Subject: isci: Fixup of smp request The struct smp_request data structure has be fixed up for Linux consumption. This probably should go to scsi/sas.h eventually. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index 3d4ca12..d10c382 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -199,20 +199,6 @@ struct sci_ssp_frame_header { }; /** - * struct smp_request_header - This structure defines the contents of an SMP - * Request header. - * - * For specific information on each of these individual fields please reference - * the SAS specification. - */ -struct smp_request_header { - u8 smp_frame_type; /* byte 0 */ - u8 function; /* byte 1 */ - u8 allocated_response_length; /* byte 2 */ - u8 request_length; /* byte 3 */ -}; - -/** * struct smp_response_header - This structure depicts the contents of the SAS * SMP DISCOVER RESPONSE frame. For specific information on each of these * individual fields please reference the SAS specification Link layer @@ -227,136 +213,6 @@ struct smp_response_header { u8 response_length; /* byte 3 */ }; -/** - * struct smp_request_general - This structure defines the contents of an SMP - * Request that is comprised of the struct smp_request_header and a CRC. - * - * For specific information on each of these individual fields please reference - * the SAS specification. - */ -struct smp_request_general { - u32 crc; /* bytes 4-7 */ - -}; - -/** - * struct smp_request_phy_identifier - This structure defines the contents of - * an SMP Request that is comprised of the struct smp_request_header and a phy - * identifier. Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA. - * - * For specific information on each of these individual fields please reference - * the SAS specification. - */ -struct smp_request_phy_identifier { - u32 reserved_byte4_7; /* bytes 4-7 */ - - u32 ignore_zone_group:1; /* byte 8 */ - u32 reserved_byte8:7; - - u32 phy_identifier:8; /* byte 9 */ - u32 reserved_byte10:8; /* byte 10 */ - u32 reserved_byte11:8; /* byte 11 */ - -}; - -/** - * struct smp_request_configure_route_information - This structure defines the - * contents of an SMP Configure Route Information request. - * - * For specific information on each of these individual fields please reference - * the SAS specification. - */ -struct smp_request_configure_route_information { - u32 expected_expander_change_count:16; /* bytes 4-5 */ - u32 expander_route_index_high:8; - u32 expander_route_index:8; /* bytes 6-7 */ - - u32 reserved_byte8:8; /* bytes 8 */ - u32 phy_identifier:8; /* bytes 9 */ - u32 reserved_byte_10_11:16; /* bytes 10-11 */ - - u32 reserved_byte_12_bit_0_6:7; - u32 disable_route_entry:1; /* byte 12 */ - u32 reserved_byte_13_15:24; /* bytes 13-15 */ - - u32 routed_sas_address[2]; /* bytes 16-23 */ - u8 reserved_byte_24_39[16]; /* bytes 24-39 */ - -}; - -/** - * struct smp_request_phy_control - This structure defines the contents of an - * SMP Phy Controler request. - * - * For specific information on each of these individual fields please reference - * the SAS specification. - */ -struct smp_request_phy_control { - u16 expected_expander_change_count; /* byte 4-5 */ - - u16 reserved_byte_6_7; /* byte 6-7 */ - u8 reserved_byte_8; /* byte 8 */ - - u8 phy_identifier; /* byte 9 */ - u8 phy_operation; /* byte 10 */ - - u8 update_partial_pathway_timeout_value:1; - u8 reserved_byte_11_bit_1_7:7; /* byte 11 */ - - u8 reserved_byte_12_23[12]; /* byte 12-23 */ - - u8 attached_device_name[8]; /* byte 24-31 */ - - u8 reserved_byte_32_bit_3_0:4; /* byte 32 */ - u8 programmed_minimum_physical_link_rate:4; - - u8 reserved_byte_33_bit_3_0:4; /* byte 33 */ - u8 programmed_maximum_physical_link_rate:4; - - u16 reserved_byte_34_35; /* byte 34-35 */ - - u8 partial_pathway_timeout_value:4; - u8 reserved_byte_36_bit_4_7:4; /* byte 36 */ - - u16 reserved_byte_37_38; /* byte 37-38 */ - u8 reserved_byte_39; /* byte 39 */ - -}; - -/** - * struct smp_request_vendor_specific - This structure depicts the vendor - * specific space for SMP request. - * - * - */ - #define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016 -struct smp_request_vendor_specific { - u8 request_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH]; -}; - -/** - * struct smp_request - This structure simply unionizes the existing request - * structures into a common request type. - * - * - */ -struct smp_request { - struct smp_request_header header; - - union { /* bytes 4-N */ - struct smp_request_general report_general; - struct smp_request_phy_identifier discover; - struct smp_request_general report_manufacturer_information; - struct smp_request_phy_identifier report_phy_sata; - struct smp_request_phy_control phy_control; - struct smp_request_phy_identifier report_phy_error_log; - struct smp_request_phy_identifier report_route_information; - struct smp_request_configure_route_information configure_route_information; - struct smp_request_vendor_specific vendor_specific_request; - } request; - -}; - /** * struct smp_response_report_general - This structure depicts the SMP Report @@ -493,6 +349,7 @@ struct smp_response_report_phy_sata { }; +#define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016 struct smp_response_vendor_specific { u8 response_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH]; }; @@ -517,17 +374,6 @@ struct smp_response { }; -/* SMP Request Functions */ -#define SMP_FUNCTION_REPORT_GENERAL 0x00 -#define SMP_FUNCTION_REPORT_MANUFACTURER_INFORMATION 0x01 -#define SMP_FUNCTION_DISCOVER 0x10 -#define SMP_FUNCTION_REPORT_PHY_ERROR_LOG 0x11 -#define SMP_FUNCTION_REPORT_PHY_SATA 0x12 -#define SMP_FUNCTION_REPORT_ROUTE_INFORMATION 0X13 -#define SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION 0X90 -#define SMP_FUNCTION_PHY_CONTROL 0x91 -#define SMP_FUNCTION_PHY_TEST 0x92 - #define SMP_FRAME_TYPE_REQUEST 0x40 #define SMP_FRAME_TYPE_RESPONSE 0x41 diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index ef59e01..8eb3c7e 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1658,38 +1658,47 @@ static void scic_sds_general_request_construct(struct scic_sds_controller *scic, } } -enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 io_tag, - void *user_io_request_object, - struct scic_sds_request *sci_req, - struct scic_sds_request **new_scic_io_request_handle) +enum sci_status +scic_io_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, + void *user_req, + struct scic_sds_request *sci_req, + struct scic_sds_request **new_sci_req) { struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, io_tag, - user_io_request_object, sci_req); + scic_sds_general_request_construct(scic, + sci_dev, + io_tag, + user_req, + sci_req); - if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + if (sci_dev->rnc.remote_node_index == + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; - if (dev->dev_type == SAS_END_DEV) { + if (dev->dev_type == SAS_END_DEV) scic_sds_ssp_io_request_assign_buffers(sci_req); - } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + else if ((dev->dev_type == SATA_DEV) || + (dev->tproto & SAS_PROTOCOL_STP)) { scic_sds_stp_request_assign_buffers(sci_req); - memset(sci_req->command_buffer, 0, sizeof(struct host_to_dev_fis)); + memset(sci_req->command_buffer, + 0, + sizeof(struct host_to_dev_fis)); } else if (dev_is_expander(dev)) { scic_sds_smp_request_assign_buffers(sci_req); - memset(sci_req->command_buffer, 0, sizeof(struct smp_request)); + memset(sci_req->command_buffer, 0, sizeof(struct smp_req)); } else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; if (status == SCI_SUCCESS) { - memset(sci_req->task_context_buffer, 0, - SCI_FIELD_OFFSET(struct scu_task_context, sgl_pair_ab)); - *new_scic_io_request_handle = sci_req; + memset(sci_req->task_context_buffer, + 0, + SCI_FIELD_OFFSET(struct scu_task_context, sgl_pair_ab)); + *new_sci_req = sci_req; } return status; diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 2815da2..7d7bd2e 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "sas.h" #include "intel_sas.h" #include "sci_base_state_machine.h" #include "scic_controller.h" @@ -67,7 +68,7 @@ static void scu_smp_request_construct_task_context( struct scic_sds_request *sci_req, - struct smp_request *smp_request); + struct smp_req *smp_req); /** * @@ -77,7 +78,7 @@ static void scu_smp_request_construct_task_context( u32 scic_sds_smp_request_get_object_size(void) { return sizeof(struct scic_sds_request) - + sizeof(struct smp_request) + + sizeof(struct smp_req) + sizeof(struct smp_response) + sizeof(struct scu_task_context) + SMP_CACHE_BYTES; @@ -100,7 +101,7 @@ u32 scic_sds_smp_request_get_object_size(void) */ #define scic_sds_smp_request_get_response_buffer(memory) \ (((char *)(scic_sds_smp_request_get_command_buffer(memory))) \ - + sizeof(struct smp_request)) + + sizeof(struct smp_req)) /** * scic_sds_smp_request_get_task_context_buffer() - @@ -142,21 +143,8 @@ void scic_sds_smp_request_assign_buffers( } -/** - * This method is called by the SCI user to build an SMP pass-through IO - * request. - * @scic_smp_request: This parameter specifies the handle to the io request - * object to be built. - * @passthru_cb: This parameter specifies the pointer to the callback structure - * that contains the function pointers - * - * - The user must have previously called scic_io_request_construct() on the - * supplied IO request. Indicate if the controller successfully built the IO - * request. - */ - -/** - * This method will fill in the SCU Task Context for a SMP request. The +/* + * This function will fill in the SCU Task Context for a SMP request. The * following important settings are utilized: -# task_type == * SCU_TASK_TYPE_SMP. This simply indicates that a normal request type * (i.e. non-raw frame) is being utilized to perform task management. -# @@ -166,26 +154,26 @@ void scic_sds_smp_request_assign_buffers( * constructed. * */ -static void scu_smp_request_construct_task_context( - struct scic_sds_request *sds_request, - struct smp_request *smp_request) +static void +scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, + struct smp_req *smp_req) { dma_addr_t dma_addr; - struct scic_sds_controller *controller; + struct scic_sds_controller *scic; struct scic_sds_remote_device *sci_dev; - struct scic_sds_port *target_port; + struct scic_sds_port *sci_port; struct scu_task_context *task_context; /* byte swap the smp request. */ - scic_word_copy_with_swap(sds_request->command_buffer, - (u32 *)smp_request, - sizeof(struct smp_request) / sizeof(u32)); + scic_word_copy_with_swap(sci_req->command_buffer, + (u32 *)smp_req, + sizeof(struct smp_req) / sizeof(u32)); - task_context = scic_sds_request_get_task_context(sds_request); + task_context = scic_sds_request_get_task_context(sci_req); - controller = scic_sds_request_get_controller(sds_request); - sci_dev = scic_sds_request_get_device(sds_request); - target_port = scic_sds_request_get_port(sds_request); + scic = scic_sds_request_get_controller(sci_req); + sci_dev = scic_sds_request_get_device(sci_req); + sci_port = scic_sds_request_get_port(sci_req); /* * Fill in the TC with the its required data @@ -195,9 +183,8 @@ static void scu_smp_request_construct_task_context( task_context->initiator_request = 1; task_context->connection_rate = sci_dev->connection_rate; task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(controller); - task_context->logical_port_index = - scic_sds_port_get_index(target_port); + scic_sds_controller_get_protocol_engine_group(scic); + task_context->logical_port_index = scic_sds_port_get_index(sci_port); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; task_context->abort = 0; task_context->valid = SCU_TASK_CONTEXT_VALID; @@ -220,8 +207,7 @@ static void scu_smp_request_construct_task_context( task_context->address_modifier = 0; /* 10h */ - task_context->ssp_command_iu_length = - smp_request->header.request_length; + task_context->ssp_command_iu_length = smp_req->req_len; /* 14h */ task_context->transfer_length_bytes = 0; @@ -231,7 +217,7 @@ static void scu_smp_request_construct_task_context( * since commandIU has been build by framework at this point, we just * copy the frist DWord from command IU to this location. */ memcpy((void *)(&task_context->type.smp), - sds_request->command_buffer, + sci_req->command_buffer, sizeof(u32)); /* @@ -241,19 +227,18 @@ static void scu_smp_request_construct_task_context( */ task_context->task_phase = 0; - if (sds_request->was_tag_assigned_by_user) { + if (sci_req->was_tag_assigned_by_user) { /* * Build the task context now since we have already read * the data */ - sds_request->post_context = + sci_req->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << + (scic_sds_controller_get_protocol_engine_group(scic) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << + (scic_sds_port_get_index(sci_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sds_request->io_tag)); + scic_sds_io_tag_get_index(sci_req->io_tag)); } else { /* * Build the task context now since we have already read @@ -261,12 +246,11 @@ static void scu_smp_request_construct_task_context( * I/O tag index is not assigned because we have to wait * until we get a TCi. */ - sds_request->post_context = + sci_req->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << + (scic_sds_controller_get_protocol_engine_group(scic) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << + (scic_sds_port_get_index(sci_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); } @@ -274,9 +258,9 @@ static void scu_smp_request_construct_task_context( * Copy the physical address for the command buffer to the SCU Task * Context command buffer should not contain command header. */ - dma_addr = scic_io_request_get_dma_addr(sds_request, + dma_addr = scic_io_request_get_dma_addr(sci_req, (char *) - (sds_request->command_buffer) + + (sci_req->command_buffer) + sizeof(u32)); task_context->command_iu_upper = upper_32_bits(dma_addr); @@ -577,7 +561,7 @@ static const struct sci_base_state scic_sds_smp_request_started_substate_table[] */ enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) { - struct smp_request *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); + struct smp_req *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); if (!smp_req) return SCI_FAILURE_INSUFFICIENT_RESOURCES; @@ -600,18 +584,18 @@ enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) * Look at the SMP requests' header fields; for certain SAS 1.x SMP * functions under SAS 2.0, a zero request length really indicates * a non-zero default length. */ - if (smp_req->header.request_length == 0) { - switch (smp_req->header.function) { - case SMP_FUNCTION_DISCOVER: - case SMP_FUNCTION_REPORT_PHY_ERROR_LOG: - case SMP_FUNCTION_REPORT_PHY_SATA: - case SMP_FUNCTION_REPORT_ROUTE_INFORMATION: - smp_req->header.request_length = 2; + if (smp_req->req_len == 0) { + switch (smp_req->func) { + case SMP_DISCOVER: + case SMP_REPORT_PHY_ERR_LOG: + case SMP_REPORT_PHY_SATA: + case SMP_REPORT_ROUTE_INFO: + smp_req->req_len = 2; break; - case SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION: - case SMP_FUNCTION_PHY_CONTROL: - case SMP_FUNCTION_PHY_TEST: - smp_req->header.request_length = 9; + case SMP_CONF_ROUTE_INFO: + case SMP_PHY_CONTROL: + case SMP_PHY_TEST_FUNCTION: + smp_req->req_len = 9; break; /* Default - zero is a valid default for 2.0. */ } diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 501df3c..36adc15 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -61,7 +61,8 @@ #include "request.h" #include "sata.h" #include "scu_completion_codes.h" -#include "core/scic_sds_request.h" +#include "scic_sds_request.h" +#include "sas.h" static enum sci_status isci_request_ssp_request_construct( struct isci_request *request) @@ -113,47 +114,37 @@ static enum sci_status isci_request_stp_request_construct( return status; } -/** - * isci_smp_request_build() - This function builds the smp request object. - * @isci_host: This parameter specifies the ISCI host object - * @request: This parameter points to the isci_request object allocated in the +/* + * isci_smp_request_build() - This function builds the smp request. + * @ireq: This parameter points to the isci_request allocated in the * request construct function. - * @sci_device: This parameter is the handle for the sci core's remote device - * object that is the destination for this request. * * SCI_SUCCESS on successfull completion, or specific failure code. */ -static enum sci_status isci_smp_request_build( - struct isci_request *request) +static enum sci_status isci_smp_request_build(struct isci_request *ireq) { enum sci_status status = SCI_FAILURE; - struct sas_task *task = isci_request_access_task(request); + struct sas_task *task = isci_request_access_task(ireq); + struct scic_sds_request *sci_req = ireq->sci_request_handle; + void *cmd_iu = sci_req->command_buffer; - void *command_iu_address = - scic_io_request_get_command_iu_address( - request->sci_request_handle - ); + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: request = %p\n", __func__, ireq); - dev_dbg(&request->isci_host->pdev->dev, - "%s: request = %p\n", - __func__, - request); - dev_dbg(&request->isci_host->pdev->dev, + dev_dbg(&ireq->isci_host->pdev->dev, "%s: smp_req len = %d\n", __func__, task->smp_task.smp_req.length); /* copy the smp_command to the address; */ sg_copy_to_buffer(&task->smp_task.smp_req, 1, - (char *)command_iu_address, - sizeof(struct smp_request) - ); + (char *)cmd_iu, + sizeof(struct smp_req)); - status = scic_io_request_construct_smp(request->sci_request_handle); + status = scic_io_request_construct_smp(sci_req); if (status != SCI_SUCCESS) - dev_warn(&request->isci_host->pdev->dev, - "%s: scic_io_request_construct_smp failed with " - "status = %d\n", + dev_warn(&ireq->isci_host->pdev->dev, + "%s: failed with status = %d\n", __func__, status); @@ -1073,9 +1064,8 @@ void isci_request_io_request_complete( sg_copy_from_buffer( &task->smp_task.smp_resp, 1, command_iu_address - + sizeof(struct smp_request), - sizeof(struct smp_resp) - ); + + sizeof(struct smp_req), + sizeof(struct smp_resp)); } else if (completion_status == SCI_IO_SUCCESS_IO_DONE_EARLY) { diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h index 1a1e9bc..f5d7e6a 100644 --- a/drivers/scsi/isci/sas.h +++ b/drivers/scsi/isci/sas.h @@ -55,6 +55,9 @@ #ifndef _SCI_SAS_H_ #define _SCI_SAS_H_ + +#include + /* * SATA FIS Types These constants depict the various SATA FIS types devined in * the serial ATA specification. @@ -106,4 +109,108 @@ struct ssp_task_iu { u8 _r_c[12]; } __packed; + +/* + * struct smp_req_phy_id - This structure defines the contents of + * an SMP Request that is comprised of the struct smp_request_header and a + * phy identifier. + * Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_phy_id { + u8 _r_a[4]; /* bytes 4-7 */ + + u8 ign_zone_grp:1; /* byte 8 */ + u8 _r_b:7; + + u8 phy_id; /* byte 9 */ + u8 _r_c; /* byte 10 */ + u8 _r_d; /* byte 11 */ +} __packed; + +/* + * struct smp_req_config_route_info - This structure defines the + * contents of an SMP Configure Route Information request. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_conf_rtinfo { + u16 exp_change_cnt; /* bytes 4-5 */ + u8 exp_rt_idx_hi; /* byte 6 */ + u8 exp_rt_idx; /* byte 7 */ + + u8 _r_a; /* byte 8 */ + u8 phy_id; /* byte 9 */ + u16 _r_b; /* bytes 10-11 */ + + u8 _r_c:7; /* byte 12 */ + u8 dis_rt_entry:1; + u8 _r_d[3]; /* bytes 13-15 */ + + u8 rt_sas_addr[8]; /* bytes 16-23 */ + u8 _r_e[16]; /* bytes 24-39 */ +} __packed; + +/* + * struct smp_req_phycntl - This structure defines the contents of an + * SMP Phy Controller request. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_phycntl { + u16 exp_change_cnt; /* byte 4-5 */ + + u8 _r_a[3]; /* bytes 6-8 */ + + u8 phy_id; /* byte 9 */ + u8 phy_op; /* byte 10 */ + + u8 upd_pathway:1; /* byte 11 */ + u8 _r_b:7; + + u8 _r_c[12]; /* byte 12-23 */ + + u8 att_dev_name[8]; /* byte 24-31 */ + + u8 _r_d:4; /* byte 32 */ + u8 min_linkrate:4; + + u8 _r_e:4; /* byte 33 */ + u8 max_linkrate:4; + + u8 _r_f[2]; /* byte 34-35 */ + + u8 pathway:4; /* byte 36 */ + u8 _r_g:4; + + u8 _r_h[3]; /* bytes 37-39 */ +} __packed; + +#define SMP_REQ_VENDOR_SPECIFIC_MAX_LEN 1016 + +/* + * struct smp_req - This structure simply unionizes the existing request + * structures into a common request type. + * + * XXX: This data structure may need to go to scsi/sas.h + */ +struct smp_req { + u8 type; /* byte 0 */ + u8 func; /* byte 1 */ + u8 alloc_resp_len; /* byte 2 */ + u8 req_len; /* byte 3 */ + + union { /* bytes 4-N */ + u32 smp_req_gen; + struct smp_req_phy_id phy_id; + struct smp_req_phycntl phy_cntl; + struct smp_req_conf_rtinfo conf_rt_info; + u8 vendor[SMP_REQ_VENDOR_SPECIFIC_MAX_LEN]; + }; +} __packed; + #endif -- cgit v0.10.2 From d20930a2b3271b233f4bef3c59ce602dfc9e5d83 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 18:07:09 -0700 Subject: isci: Converting smp_response to Linux native smp_resp Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index d10c382..58bf1fb 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -198,184 +198,6 @@ struct sci_ssp_frame_header { }; -/** - * struct smp_response_header - This structure depicts the contents of the SAS - * SMP DISCOVER RESPONSE frame. For specific information on each of these - * individual fields please reference the SAS specification Link layer - * section on address frames. - * - * - */ -struct smp_response_header { - u8 smp_frame_type; /* byte 0 */ - u8 function; /* byte 1 */ - u8 function_result; /* byte 2 */ - u8 response_length; /* byte 3 */ -}; - - -/** - * struct smp_response_report_general - This structure depicts the SMP Report - * General for expander devices. It adheres to the SAS-2.1 specification. - * - * For specific information on each of these individual fields please reference - * the SAS specification Application layer section on SMP. - */ -struct smp_response_report_general { - u16 expander_change_count; /* byte 4-5 */ - u16 expander_route_indexes; /* byte 6-7 */ - - u32 reserved_byte8:7; /* byte 8 bit 0-6 */ - u32 long_response:1; /* byte 8 bit 7 */ - - u32 number_of_phys:8; /* byte 9 */ - - u32 configurable_route_table:1; /* byte 10 */ - u32 configuring:1; - u32 configures_others:1; - u32 open_reject_retry_supported:1; - u32 stp_continue_awt:1; - u32 self_configuring:1; - u32 zone_configuring:1; - u32 table_to_table_supported:1; - - u32 reserved_byte11:8; /* byte 11 */ - - u32 enclosure_logical_identifier_high; /* byte 12-15 */ - u32 enclosure_logical_identifier_low; /* byte 16-19 */ - - u32 reserved_byte20_23; - u32 reserved_byte24_27; - -}; - -struct smp_response_report_general_long { - struct smp_response_report_general sas1_1; - - struct { - u16 reserved1; - u16 stp_bus_inactivity_time_limit; - u16 stp_max_connect_time_limit; - u16 stp_smp_i_t_nexus_loss_time; - - u32 zoning_enabled:1; - u32 zoning_supported:1; - u32 physicaL_presence_asserted:1; - u32 zone_locked:1; - u32 reserved2:1; - u32 num_zone_groups:3; - u32 saving_zoning_enabled_supported:3; - u32 saving_zone_perms_table_supported:1; - u32 saving_zone_phy_info_supported:1; - u32 saving_zone_manager_password_supported:1; - u32 saving:1; - u32 reserved3:1; - u32 max_number_routed_sas_addresses:16; - - struct sci_sas_address active_zone_manager_sas_address; - - u16 zone_lock_inactivity_time_limit; - u16 reserved4; - - u8 reserved5; - u8 first_enclosure_connector_element_index; - u8 number_of_enclosure_connector_element_indices; - u8 reserved6; - - u32 reserved7:7; - u32 reduced_functionality:1; - u32 time_to_reduce_functionality:8; - u32 initial_time_to_reduce_functionality:8; - u8 max_reduced_functionality_time; - - u16 last_self_config_status_descriptor_index; - u16 max_number_of_stored_self_config_status_descriptors; - - u16 last_phy_event_list_descriptor_index; - u16 max_number_of_stored_phy_event_list_descriptors; - } sas2; - -}; - -/** - * struct smp_response_report_manufacturer_information - This structure depicts - * the SMP report manufacturer information for expander devices. It adheres - * to the SAS-2.1 specification. - * - * For specific information on each of these individual fields please reference - * the SAS specification Application layer section on SMP. - */ -struct smp_response_report_manufacturer_information { - u32 expander_change_count:16; /* bytes 4-5 */ - u32 reserved1:16; - - u32 sas1_1_format:1; - u32 reserved2:31; - - u8 vendor_id[8]; - u8 product_id[16]; - u8 product_revision_level[4]; - u8 component_vendor_id[8]; - u8 component_id[2]; - u8 component_revision_level; - u8 reserved3; - u8 vendor_specific[8]; - -}; - -/** - * struct smp_response_report_phy_sata - This structure depicts the contents of - * the SAS SMP REPORT PHY SATA frame. For specific information on each of - * these individual fields please reference the SAS specification Link layer - * section on address frames. - * - * - */ -struct smp_response_report_phy_sata { - u32 ignored_byte_4_7; /* bytes 4-7 */ - - u32 affiliations_valid:1; - u32 affiliations_supported:1; - u32 reserved_byte11:6; /* byte 11 */ - u32 ignored_byte10:8; /* byte 10 */ - u32 phy_identifier:8; /* byte 9 */ - u32 reserved_byte_8:8; /* byte 8 */ - - u32 reserved_12_15; - u32 stp_sas_address[2]; - u8 device_to_host_fis[20]; - u32 reserved_44_47; - u32 affiliated_stp_initiator_sas_address[2]; - -}; - -#define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016 -struct smp_response_vendor_specific { - u8 response_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH]; -}; - -union smp_response_body { - struct smp_response_report_general report_general; - struct smp_response_report_manufacturer_information report_manufacturer_information; - struct smp_response_report_phy_sata report_phy_sata; - struct smp_response_vendor_specific vendor_specific_response; -}; - -/** - * struct smp_response - This structure simply unionizes the existing response - * structures into a common response type. - * - * - */ -struct smp_response { - struct smp_response_header header; - - union smp_response_body response; - -}; - -#define SMP_FRAME_TYPE_REQUEST 0x40 -#define SMP_FRAME_TYPE_RESPONSE 0x41 #define PHY_OPERATION_NOP 0x00 #define PHY_OPERATION_LINK_RESET 0x01 diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 7d7bd2e..e6cfcbb 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include "sas.h" #include "intel_sas.h" #include "sci_base_state_machine.h" @@ -79,7 +80,7 @@ u32 scic_sds_smp_request_get_object_size(void) { return sizeof(struct scic_sds_request) + sizeof(struct smp_req) - + sizeof(struct smp_response) + + sizeof(struct smp_resp) + sizeof(struct scu_task_context) + SMP_CACHE_BYTES; } @@ -111,7 +112,7 @@ u32 scic_sds_smp_request_get_object_size(void) #define scic_sds_smp_request_get_task_context_buffer(memory) \ ((struct scu_task_context *)(\ ((char *)(scic_sds_smp_request_get_response_buffer(memory))) \ - + sizeof(struct smp_response) \ + + sizeof(struct smp_resp) \ )) @@ -271,8 +272,8 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, task_context->response_iu_lower = 0; } -/** - * This method processes an unsolicited frame while the SMP request is waiting +/* + * This function processes an unsolicited frame while the SMP request is waiting * for a response frame. It will copy the response data, release the * unsolicited frame, and transition the request to the * SCI_BASE_REQUEST_STATE_COMPLETED state. @@ -281,63 +282,52 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, * @frame_index: This parameter indicates the unsolicited frame index that * should contain the response. * - * This method returns an indication of whether the response frame was handled + * This function returns an indication of whether the response frame was handled * successfully or not. SCI_SUCCESS Currently this value is always returned and * indicates successful processing of the TC response. */ -static enum sci_status scic_sds_smp_request_await_response_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) +static enum sci_status +scic_sds_smp_request_await_response_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) { enum sci_status status; void *frame_header; - struct smp_response_header *rsp_hdr; - u8 *user_smp_buffer = sci_req->response_buffer; + struct smp_resp *rsp_hdr; + u8 *usr_smp_buf = sci_req->response_buffer; status = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, - &frame_header - ); + &frame_header); /* byte swap the header. */ - scic_word_copy_with_swap( - (u32 *)user_smp_buffer, - frame_header, - sizeof(struct smp_response_header) / sizeof(u32) - ); - rsp_hdr = (struct smp_response_header *)user_smp_buffer; + scic_word_copy_with_swap((u32 *)usr_smp_buf, + frame_header, + SMP_RESP_HDR_SZ / sizeof(u32)); - if (rsp_hdr->smp_frame_type == SMP_FRAME_TYPE_RESPONSE) { - void *smp_response_buffer; + rsp_hdr = (struct smp_resp *)usr_smp_buf; + + if (rsp_hdr->frame_type == SMP_RESPONSE) { + void *smp_resp; status = scic_sds_unsolicited_frame_control_get_buffer( &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, - &smp_response_buffer - ); + &smp_resp); scic_word_copy_with_swap( - (u32 *)(user_smp_buffer + sizeof(struct smp_response_header)), - smp_response_buffer, - sizeof(union smp_response_body) / sizeof(u32) - ); - /* - * Don't need to copy to user space. User instead will refer to - * core request's response buffer. */ - - /* - * copy the smp response to framework smp request's response buffer. - * scic_sds_smp_request_copy_response(sci_req); */ + (u32 *)(usr_smp_buf + SMP_RESP_HDR_SZ), + smp_resp, + (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / + sizeof(u32)); scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_base_state_machine_change_state( &sci_req->started_substate_machine, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION - ); + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); } else { /* This was not a response frame why did it get forwarded? */ dev_err(scic_to_dev(sci_req->owning_controller), @@ -346,23 +336,20 @@ static enum sci_status scic_sds_smp_request_await_response_frame_handler( __func__, sci_req, frame_index, - rsp_hdr->smp_frame_type); + rsp_hdr->frame_type); scic_sds_request_set_status( sci_req, SCU_TASK_DONE_SMP_FRM_TYPE_ERR, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); sci_base_state_machine_change_state( &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + SCI_BASE_REQUEST_STATE_COMPLETED); } - scic_sds_controller_release_frame( - sci_req->owning_controller, frame_index - ); + scic_sds_controller_release_frame(sci_req->owning_controller, + frame_index); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h index f5d7e6a..83eab46 100644 --- a/drivers/scsi/isci/sas.h +++ b/drivers/scsi/isci/sas.h @@ -213,4 +213,6 @@ struct smp_req { }; } __packed; +#define SMP_RESP_HDR_SZ 4 + #endif -- cgit v0.10.2 From f700ad4331d55df729a36b2602c4abe2d855036f Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 18:08:35 -0700 Subject: isci: remove redundant copies of IAF We need to remove the extra copies of identify address frame that's being kept around. We only need the one copy that libsas is using. Signed-off-by: Dave Jiang [further cleanups] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 8fcd3a4..3f43e8d 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -287,47 +287,4 @@ enum scic_phy_counter_id { SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR }; - -/** - * scic_sas_phy_get_properties() - This method will enable the user to retrieve - * information specific to a SAS phy, such as: the received identify address - * frame, received phy capabilities, etc. - * @phy: this parameter specifies the phy for which to retrieve properties. - * @properties: This parameter specifies the properties structure into which to - * copy the requested information. - * - * This method returns an indication as to whether the SAS phy properties were - * successfully retrieved. SCI_SUCCESS This value is returned if the SAS - * properties are successfully retrieved. SCI_FAILURE This value is returned if - * the SAS properties are not successfully retrieved (e.g. It's not a SAS Phy). - */ -enum sci_status scic_sas_phy_get_properties( - struct scic_sds_phy *phy, - struct scic_sas_phy_properties *properties); - -/** - * scic_sata_phy_get_properties() - This method will enable the user to - * retrieve information specific to a SATA phy, such as: the received - * signature FIS, if a port selector is present, etc. - * @phy: this parameter specifies the phy for which to retrieve properties. - * @properties: This parameter specifies the properties structure into which to - * copy the requested information. - * - * This method returns an indication as to whether the SATA phy properties were - * successfully retrieved. SCI_SUCCESS This value is returned if the SATA - * properties are successfully retrieved. SCI_FAILURE This value is returned if - * the SATA properties are not successfully retrieved (e.g. It's not a SATA - * Phy). - */ -enum sci_status scic_sata_phy_get_properties( - struct scic_sds_phy *phy, - struct scic_sata_phy_properties *properties); - - - - - - - #endif /* _SCIC_PHY_H_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index bd2b305..4afdb42 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -436,8 +436,9 @@ void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, struct sci_sas_address *sas_address) { struct sas_identify_frame *iaf; + struct isci_phy *iphy = sci_phy->iphy; - iaf = &sci_phy->phy_type.sas_id_frame; + iaf = &iphy->frame_rcvd.iaf; memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); } @@ -458,13 +459,13 @@ void scic_sds_phy_get_attached_phy_protocols( protocols->u.all = 0; if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + struct isci_phy *iphy = sci_phy->iphy; struct sas_identify_frame *iaf; - iaf = &sci_phy->phy_type.sas_id_frame; + iaf = &iphy->frame_rcvd.iaf; memcpy(&protocols->u.all, &iaf->initiator_bits, 2); - } else if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { + } else if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) protocols->u.bits.stp_target = 1; - } } /* @@ -551,49 +552,6 @@ enum sci_status scic_sds_phy_consume_power_handler( /* * ***************************************************************************** - * * SCIC PHY Public Methods - * ***************************************************************************** */ - - -enum sci_status scic_sas_phy_get_properties( - struct scic_sds_phy *sci_phy, - struct scic_sas_phy_properties *properties) -{ - if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - memcpy(&properties->rcvd_iaf, - &sci_phy->phy_type.sas_id_frame, - sizeof(struct sas_identify_frame)); - - properties->rcvd_cap.all = - readl(&sci_phy->link_layer_registers->receive_phycap); - - return SCI_SUCCESS; - } - - return SCI_FAILURE; -} - - -enum sci_status scic_sata_phy_get_properties( - struct scic_sds_phy *sci_phy, - struct scic_sata_phy_properties *properties) -{ - if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { - memcpy(&properties->signature_fis, - &sci_phy->phy_type.sata_sig_fis, - sizeof(struct dev_to_host_fis)); - - /* / @todo add support for port selectors. */ - properties->is_port_selector_present = false; - - return SCI_SUCCESS; - } - - return SCI_FAILURE; -} - -/* - * ***************************************************************************** * * SCIC SDS PHY HELPER FUNCTIONS * ***************************************************************************** */ @@ -1163,6 +1121,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler enum sci_status result; u32 *frame_words; struct sas_identify_frame *identify_frame; + struct isci_phy *iphy = sci_phy->iphy; result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_phy_get_controller(sci_phy)->uf_control), @@ -1188,9 +1147,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler frame_words[4] = SCIC_SWAP_DWORD(frame_words[4]); frame_words[5] = SCIC_SWAP_DWORD(frame_words[5]); - memcpy(&sci_phy->phy_type.sas_id_frame, - identify_frame, - sizeof(struct sas_identify_frame)); + memcpy(&iphy->frame_rcvd.iaf, identify_frame, sizeof(*identify_frame)); if (identify_frame->smp_tport) { /* We got the IAF for an expander PHY go to the final state since @@ -1239,6 +1196,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle enum sci_status result; struct dev_to_host_fis *frame_header; u32 *fis_frame_data; + struct isci_phy *iphy = sci_phy->iphy; result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_phy_get_controller(sci_phy)->uf_control), @@ -1255,10 +1213,9 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle frame_index, (void **)&fis_frame_data); - scic_sds_controller_copy_sata_response( - &sci_phy->phy_type.sata_sig_fis, - frame_header, - fis_frame_data); + scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, + frame_header, + fis_frame_data); /* got IAF we can now go to the await spinup semaphore state */ sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, @@ -2330,7 +2287,6 @@ static const struct sci_base_state scic_sds_phy_state_table[] = { void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, struct scic_sds_port *owning_port, u8 phy_index) { - sci_base_state_machine_construct(&sci_phy->state_machine, sci_phy, scic_sds_phy_state_table, @@ -2347,9 +2303,6 @@ void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; sci_phy->sata_timeout_timer = NULL; - /* Clear out the identification buffer data */ - memset(&sci_phy->phy_type, 0, sizeof(sci_phy->phy_type)); - /* Initialize the the substate machines */ sci_base_state_machine_construct(&sci_phy->starting_substate_machine, sci_phy, diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 47b2194..e91f283 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -272,11 +272,6 @@ struct scic_sds_phy { */ bool is_in_link_training; - union { - struct sas_identify_frame sas_id_frame; - struct dev_to_host_fis sata_sig_fis; - } phy_type; - /** * This field contains a reference to the timer utilized in detecting * when a signature FIS timeout has occurred. The signature FIS is the diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 3100fd8..d4c4975 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -71,11 +71,8 @@ */ struct isci_phy { - struct scic_sds_phy *sci_phy_handle; - struct asd_sas_phy sas_phy; - struct sas_identify_frame *frame; struct isci_port *isci_port; u8 sas_addr[SAS_ADDR_SIZE]; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 0a15773..96a2002 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -171,7 +171,6 @@ void isci_port_link_up( struct scic_port_properties properties; struct isci_phy *isci_phy = phy->iphy; struct isci_port *isci_port = port->iport; - enum sci_status call_status; unsigned long success = true; BUG_ON(isci_phy->isci_port != NULL); @@ -191,21 +190,7 @@ void isci_port_link_up( if (properties.remote.protocols.u.bits.stp_target) { u64 attached_sas_address; - struct scic_sata_phy_properties sata_phy_properties; - isci_phy->sas_phy.oob_mode = SATA_OOB_MODE; - - /* Get a copy of the signature fis for libsas */ - call_status = scic_sata_phy_get_properties(phy, - &sata_phy_properties); - - /* - * XXX I am concerned about this "assert". shouldn't we - * handle the return appropriately? - */ - BUG_ON(call_status != SCI_SUCCESS); - - isci_phy->frame_rcvd.fis = sata_phy_properties.signature_fis; isci_phy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis); /* @@ -225,24 +210,12 @@ void isci_port_link_up( } else if (properties.remote.protocols.u.bits.ssp_target || properties.remote.protocols.u.bits.smp_target) { - - struct scic_sas_phy_properties sas_phy_properties; - isci_phy->sas_phy.oob_mode = SAS_OOB_MODE; - - /* Get a copy of the identify address frame for libsas */ - call_status = scic_sas_phy_get_properties(phy, - &sas_phy_properties); - - BUG_ON(call_status != SCI_SUCCESS); - - isci_phy->frame_rcvd.iaf = sas_phy_properties.rcvd_iaf; isci_phy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame); /* Copy the attached SAS address from the IAF */ memcpy(isci_phy->sas_phy.attached_sas_addr, isci_phy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE); - } else { dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__); success = false; -- cgit v0.10.2 From d7b90fc3436fa6d5b5251eec3128386af1a4d7b8 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 18:22:33 -0700 Subject: isci: fixup SAS iaf protocols data structure Moved the actual data structure that's read from the phy register to phy header. Removed the parsing of identify address frame protocol bits as that seemed not necessary and we can use existing information. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index 58bf1fb..f2d5ca1 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -85,33 +85,6 @@ struct sci_sas_address { }; /** - * struct sci_sas_identify_address_frame_protocols - This structure depicts the - * contents of bytes 2 and 3 in the SAS IDENTIFY ADDRESS FRAME (IAF). - * - * For specific information on each of these individual fields please reference - * the SAS specification Link layer section on address frames. - */ -struct sci_sas_identify_address_frame_protocols { - union { - struct { - u16 restricted1:1; - u16 smp_initiator:1; - u16 stp_initiator:1; - u16 ssp_initiator:1; - u16 reserved3:4; - u16 restricted2:1; - u16 smp_target:1; - u16 stp_target:1; - u16 ssp_target:1; - u16 reserved4:4; - } bits; - - u16 all; - } u; - -}; - -/** * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS * specification defined task attribute values for a command information * unit. diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 3f43e8d..451d797 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -103,6 +103,26 @@ struct scic_phy_cap { }; } __packed; +/* this data structure reflects the link layer transmit identification reg */ +struct scic_phy_proto { + union { + struct { + u16 _r_a:1; + u16 smp_iport:1; + u16 stp_iport:1; + u16 ssp_iport:1; + u16 _r_b:4; + u16 _r_c:1; + u16 smp_tport:1; + u16 stp_tport:1; + u16 ssp_tport:1; + u16 _r_d:4; + }; + u16 all; + }; +} __packed; + + /** * struct scic_phy_properties - This structure defines the properties common to * all phys that can be retrieved. @@ -124,16 +144,10 @@ struct scic_phy_properties { enum sas_linkrate negotiated_link_rate; /** - * This field indicates the protocols supported by the phy. - */ - struct sci_sas_identify_address_frame_protocols protocols; - - /** * This field specifies the index of the phy in relation to other * phys within the controller. This index is zero relative. */ u8 index; - }; /** diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index 56d0507..4ae9b6c 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -57,6 +57,7 @@ #define _SCIC_PORT_H_ #include "sci_status.h" +#include "scic_phy.h" #include "intel_sas.h" struct scic_sds_port; @@ -72,8 +73,7 @@ enum scic_port_not_ready_reason_code { struct scic_port_end_point_properties { struct sci_sas_address sas_address; - struct sci_sas_identify_address_frame_protocols protocols; - + struct scic_phy_proto protocols; }; struct scic_port_properties { diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 4afdb42..b9d6fc7 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -442,37 +442,15 @@ void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); } -void scic_sds_phy_get_protocols( - struct scic_sds_phy *sci_phy, - struct sci_sas_identify_address_frame_protocols *protocols) +void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, + struct scic_phy_proto *protocols) { - protocols->u.all = + protocols->all = (u16)(readl(&sci_phy-> link_layer_registers->transmit_identification) & 0x0000FFFF); } -void scic_sds_phy_get_attached_phy_protocols( - struct scic_sds_phy *sci_phy, - struct sci_sas_identify_address_frame_protocols *protocols) -{ - protocols->u.all = 0; - - if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - struct isci_phy *iphy = sci_phy->iphy; - struct sas_identify_frame *iaf; - - iaf = &iphy->frame_rcvd.iaf; - memcpy(&protocols->u.all, &iaf->initiator_bits, 2); - } else if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) - protocols->u.bits.stp_target = 1; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY Handler Redirects - * ***************************************************************************** */ - /** * This method will attempt to start the phy object. This request is only valid * when the phy is in the stopped state diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index e91f283..b0cebdc 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -57,6 +57,7 @@ #define _SCIC_SDS_PHY_H_ #include "intel_sas.h" +#include "scic_phy.h" #include "scu_registers.h" #include "sci_base_state_machine.h" #include @@ -438,11 +439,7 @@ void scic_sds_phy_get_attached_sas_address( struct sci_sas_address *sas_address); void scic_sds_phy_get_protocols( - struct scic_sds_phy *this_phy, - struct sci_sas_identify_address_frame_protocols *protocols); - -void scic_sds_phy_get_attached_phy_protocols( - struct scic_sds_phy *this_phy, - struct sci_sas_identify_address_frame_protocols *protocols); + struct scic_sds_phy *sci_phy, + struct scic_phy_proto *protocols); #endif /* _SCIC_SDS_PHY_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 3697211..05bc3bf 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "sas.h" #include "intel_sas.h" #include "scic_controller.h" #include "scic_phy.h" @@ -362,33 +363,32 @@ void scic_sds_port_get_sas_address( } } -/** - * This method will indicate which protocols are supported by this port. +/* + * This function will indicate which protocols are supported by this port. * @sci_port: a handle corresponding to the SAS port for which to return the * supported protocols. - * @protocols: This parameter specifies a pointer to an IAF protocol field - * structure into which the core will copy the protocol values for the port. - * The values are returned as part of a bit mask in order to allow for - * multi-protocol support. - * + * @protocols: This parameter specifies a pointer to a data structure + * which the core will copy the protocol values for the port from the + * transmit_identification register. */ -static void scic_sds_port_get_protocols( - struct scic_sds_port *sci_port, - struct sci_sas_identify_address_frame_protocols *protocols) +static void +scic_sds_port_get_protocols(struct scic_sds_port *sci_port, + struct scic_phy_proto *protocols) { u8 index; - protocols->u.all = 0; + protocols->all = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { if (sci_port->phy_table[index] != NULL) { - scic_sds_phy_get_protocols(sci_port->phy_table[index], protocols); + scic_sds_phy_get_protocols(sci_port->phy_table[index], + protocols); } } } -/** - * This method requests the SAS address for the device directly attached to +/* + * This function requests the SAS address for the device directly attached to * this SAS port. * @sci_port: a handle corresponding to the SAS port for which to return the * SAS address. @@ -401,21 +401,20 @@ void scic_sds_port_get_attached_sas_address( struct scic_sds_port *sci_port, struct sci_sas_address *sas_address) { - struct sci_sas_identify_address_frame_protocols protocols; - struct scic_sds_phy *phy; + struct scic_sds_phy *sci_phy; /* * Ensure that the phy is both part of the port and currently - * connected to the remote end-point. */ - phy = scic_sds_port_get_a_connected_phy(sci_port); - if (phy != NULL) { - scic_sds_phy_get_attached_phy_protocols(phy, &protocols); - - if (!protocols.u.bits.stp_target) { - scic_sds_phy_get_attached_sas_address(phy, sas_address); + * connected to the remote end-point. + */ + sci_phy = scic_sds_port_get_a_connected_phy(sci_port); + if (sci_phy) { + if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { + scic_sds_phy_get_attached_sas_address(sci_phy, + sas_address); } else { - scic_sds_phy_get_sas_address(phy, sas_address); - sas_address->low += phy->phy_index; + scic_sds_phy_get_sas_address(sci_phy, sas_address); + sas_address->low += sci_phy->phy_index; } } else { sas_address->high = 0; @@ -424,33 +423,6 @@ void scic_sds_port_get_attached_sas_address( } /** - * This method will indicate which protocols are supported by this remote - * device. - * @sci_port: a handle corresponding to the SAS port for which to return the - * supported protocols. - * @protocols: This parameter specifies a pointer to an IAF protocol field - * structure into which the core will copy the protocol values for the port. - * The values are returned as part of a bit mask in order to allow for - * multi-protocol support. - * - */ -static void scic_sds_port_get_attached_protocols( - struct scic_sds_port *sci_port, - struct sci_sas_identify_address_frame_protocols *protocols) -{ - struct scic_sds_phy *phy; - - /* - * Ensure that the phy is both part of the port and currently - * connected to the remote end-point. */ - phy = scic_sds_port_get_a_connected_phy(sci_port); - if (phy != NULL) - scic_sds_phy_get_attached_phy_protocols(phy, protocols); - else - protocols->u.all = 0; -} - -/** * scic_sds_port_construct_dummy_rnc() - create dummy rnc for si workaround * * @sci_port: logical port on which we need to create the remote node context @@ -595,7 +567,6 @@ enum sci_status scic_port_get_properties( scic_sds_port_get_sas_address(port, &prop->local.sas_address); scic_sds_port_get_protocols(port, &prop->local.protocols); scic_sds_port_get_attached_sas_address(port, &prop->remote.sas_address); - scic_sds_port_get_attached_protocols(port, &prop->remote.protocols); return SCI_SUCCESS; } @@ -655,14 +626,10 @@ static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy, bool do_notify_user) { - struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct sci_sas_identify_address_frame_protocols protocols; + struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic->ihost; - scic_sds_phy_get_attached_phy_protocols(sci_phy, &protocols); - - /* If this is sata port then the phy has already been resumed */ - if (!protocols.u.bits.stp_target) + if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) scic_sds_phy_resume(sci_phy); sci_port->active_phy_mask |= 1 << sci_phy->phy_index; @@ -803,15 +770,9 @@ bool scic_sds_port_link_detected( struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy) { - struct sci_sas_identify_address_frame_protocols protocols; - - scic_sds_phy_get_attached_phy_protocols(sci_phy, &protocols); - - if ( - (sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) - && (protocols.u.bits.stp_target) - && scic_sds_port_is_wide(sci_port) - ) { + if ((sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) && + (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && + scic_sds_port_is_wide(sci_port)) { scic_sds_port_invalid_link_up(sci_port, sci_phy); return false; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 96a2002..2decafb 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -187,7 +187,7 @@ void isci_port_link_up( scic_port_get_properties(port, &properties); - if (properties.remote.protocols.u.bits.stp_target) { + if (phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { u64 attached_sas_address; isci_phy->sas_phy.oob_mode = SATA_OOB_MODE; @@ -207,9 +207,7 @@ void isci_port_link_up( memcpy(&isci_phy->sas_phy.attached_sas_addr, &attached_sas_address, sizeof(attached_sas_address)); - - } else if (properties.remote.protocols.u.bits.ssp_target || - properties.remote.protocols.u.bits.smp_target) { + } else if (phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { isci_phy->sas_phy.oob_mode = SAS_OOB_MODE; isci_phy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame); -- cgit v0.10.2 From 51a57cff7ca0549bcf87cbb36086269978f42568 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 18:28:32 -0700 Subject: isci: Remove SCIC_SWAP_DWORD() Use Linux native swab32() call instead of SCIC_SWAP_DWORD(). We need to swab() because the hardware munges the data into a "big-endian dword" stream which is byte-swapped from the sas definition regardless of host endian. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c index ebf0ed9..0c75d14 100644 --- a/drivers/scsi/isci/core/sci_util.c +++ b/drivers/scsi/isci/core/sci_util.c @@ -57,19 +57,6 @@ #include "sci_util.h" #include "sci_environment.h" -void scic_word_copy_with_swap( - u32 *destination, - u32 *source, - u32 word_count) -{ - while (word_count--) { - *destination = SCIC_SWAP_DWORD(*source); - - source++; - destination++; - } -} - void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) { struct isci_request *ireq = sci_req->ireq; diff --git a/drivers/scsi/isci/core/sci_util.h b/drivers/scsi/isci/core/sci_util.h index b6f43e2..4e9c318 100644 --- a/drivers/scsi/isci/core/sci_util.h +++ b/drivers/scsi/isci/core/sci_util.h @@ -56,22 +56,8 @@ #ifndef _SCI_UTIL_H_ #define _SCI_UTIL_H_ -#include #include "scic_sds_request.h" -/** - * SCIC_SWAP_DWORD() - - * - * Normal byte swap macro - */ -#define SCIC_SWAP_DWORD(x) \ - (\ - (((x) >> 24) & 0x000000FF) \ - | (((x) >> 8) & 0x0000FF00) \ - | (((x) << 8) & 0x00FF0000) \ - | (((x) << 24) & 0xFF000000) \ - ) - #define SCIC_BUILD_DWORD(char_buffer) \ (\ ((char_buffer)[0] << 24) \ @@ -87,17 +73,23 @@ ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) /** - * scic_word_copy_with_swap() - Copy the data from source to destination and - * swap the bytes during the copy. - * @destination: This parameter specifies the destination address to which the - * data is to be copied. - * @source: This parameter specifies the source address from which data is to - * be copied. - * @word_count: This parameter specifies the number of 32-bit words to copy and - * byte swap. + * sci_swab32_cpy - convert between scsi and scu-hardware byte format + * @dest: receive the 4-byte endian swapped version of src + * @src: word aligned source buffer * + * scu hardware handles SSP/SMP control, response, and unidentified + * frames in "big endian dword" order. Regardless of host endian this + * is always a swab32()-per-dword conversion of the standard definition, + * i.e. single byte fields swapped and multi-byte fields in little- + * endian */ -void scic_word_copy_with_swap(u32 *destination, u32 *source, u32 word_count); +static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt) +{ + u32 *dest = _dest, *src = _src; + + while (--word_cnt >= 0) + dest[word_cnt] = swab32(src[word_cnt]); +} void *scic_request_get_virt_addr(struct scic_sds_request *sds_request, dma_addr_t phys_addr); diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index b9d6fc7..18dc14a 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -1098,7 +1098,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler { enum sci_status result; u32 *frame_words; - struct sas_identify_frame *identify_frame; + struct sas_identify_frame iaf; struct isci_phy *iphy = sci_phy->iphy; result = scic_sds_unsolicited_frame_control_get_header( @@ -1106,38 +1106,29 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler frame_index, (void **)&frame_words); - if (result != SCI_SUCCESS) { + if (result != SCI_SUCCESS) return result; - } - - frame_words[0] = SCIC_SWAP_DWORD(frame_words[0]); - identify_frame = (struct sas_identify_frame *)frame_words; - if (identify_frame->frame_type == 0) { + sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); + if (iaf.frame_type == 0) { u32 state; - /* Byte swap the rest of the frame so we can make - * a copy of the buffer - */ - frame_words[1] = SCIC_SWAP_DWORD(frame_words[1]); - frame_words[2] = SCIC_SWAP_DWORD(frame_words[2]); - frame_words[3] = SCIC_SWAP_DWORD(frame_words[3]); - frame_words[4] = SCIC_SWAP_DWORD(frame_words[4]); - frame_words[5] = SCIC_SWAP_DWORD(frame_words[5]); - - memcpy(&iphy->frame_rcvd.iaf, identify_frame, sizeof(*identify_frame)); - - if (identify_frame->smp_tport) { - /* We got the IAF for an expander PHY go to the final state since - * there are no power requirements for expander phys. + memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); + if (iaf.smp_tport) { + /* We got the IAF for an expander PHY go to the final + * state since there are no power requirements for + * expander phys. */ state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; } else { - /* We got the IAF we can now go to the await spinup semaphore state */ + /* We got the IAF we can now go to the await spinup + * semaphore state + */ state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; } - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - state); + sci_base_state_machine_change_state( + &sci_phy->starting_substate_machine, + state); result = SCI_SUCCESS; } else dev_warn(sciphy_to_dev(sci_phy), @@ -1146,7 +1137,6 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler __func__, frame_index); - /* Regardless of the result release this frame since we are done with it */ scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), frame_index); diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 8eb3c7e..e9c69d4 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -362,10 +362,8 @@ static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sc cmd_iu->task_attr = task->ssp_task.task_attr; cmd_iu->_r_c = 0; - scic_word_copy_with_swap( - (u32 *)(&cmd_iu->cdb), - (u32 *)task->ssp_task.cdb, - sizeof(task->ssp_task.cdb) / sizeof(u32)); + sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cdb, + sizeof(task->ssp_task.cdb) / sizeof(u32)); } static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci_req) @@ -1120,10 +1118,11 @@ scic_sds_request_started_state_tc_completion_handler( * completed early. */ struct ssp_response_iu *resp = sci_req->response_buffer; - scic_word_copy_with_swap( - sci_req->response_buffer, - sci_req->response_buffer, - SSP_RESP_IU_MAX_SIZE / sizeof(u32)); + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_swab32_cpy(sci_req->response_buffer, + sci_req->response_buffer, + word_cnt); if (resp->status == 0) { scic_sds_request_set_status( @@ -1140,16 +1139,18 @@ scic_sds_request_started_state_tc_completion_handler( break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): - scic_word_copy_with_swap( - sci_req->response_buffer, - sci_req->response_buffer, - SSP_RESP_IU_MAX_SIZE / sizeof(u32)); + { + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); + sci_swab32_cpy(sci_req->response_buffer, + sci_req->response_buffer, + word_cnt); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); break; + } case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): /* @@ -1273,15 +1274,15 @@ scic_sds_request_started_state_frame_handler(struct scic_sds_request *sci_req, if (frame_header->frame_type == SCI_SAS_RESPONSE_FRAME) { struct ssp_response_iu *resp_iu; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); status = scic_sds_unsolicited_frame_control_get_buffer( &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, (void **)&resp_iu); - scic_word_copy_with_swap(sci_req->response_buffer, - (u32 *)resp_iu, - SSP_RESP_IU_MAX_SIZE); + sci_swab32_cpy(sci_req->response_buffer, + resp_iu, word_cnt); resp_iu = sci_req->response_buffer; diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index e6cfcbb..bca51a7 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -164,11 +164,11 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, struct scic_sds_remote_device *sci_dev; struct scic_sds_port *sci_port; struct scu_task_context *task_context; + ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32); /* byte swap the smp request. */ - scic_word_copy_with_swap(sci_req->command_buffer, - (u32 *)smp_req, - sizeof(struct smp_req) / sizeof(u32)); + sci_swab32_cpy(sci_req->command_buffer, smp_req, + word_cnt); task_context = scic_sds_request_get_task_context(sci_req); @@ -295,6 +295,7 @@ scic_sds_smp_request_await_response_frame_handler( void *frame_header; struct smp_resp *rsp_hdr; u8 *usr_smp_buf = sci_req->response_buffer; + ssize_t word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); status = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_request_get_controller(sci_req)->uf_control), @@ -302,9 +303,7 @@ scic_sds_smp_request_await_response_frame_handler( &frame_header); /* byte swap the header. */ - scic_word_copy_with_swap((u32 *)usr_smp_buf, - frame_header, - SMP_RESP_HDR_SZ / sizeof(u32)); + sci_swab32_cpy(usr_smp_buf, frame_header, word_cnt); rsp_hdr = (struct smp_resp *)usr_smp_buf; @@ -316,11 +315,11 @@ scic_sds_smp_request_await_response_frame_handler( frame_index, &smp_resp); - scic_word_copy_with_swap( - (u32 *)(usr_smp_buf + SMP_RESP_HDR_SZ), - smp_resp, - (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / - sizeof(u32)); + word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / + sizeof(u32); + + sci_swab32_cpy(usr_smp_buf + SMP_RESP_HDR_SZ, + smp_resp, word_cnt); scic_sds_request_set_status( sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); -- cgit v0.10.2 From 2d9c2240e0bad47e8d08091016b537287a263976 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 18:45:05 -0700 Subject: isci: Using Linux SSP frame header Removing of struct sci_ssp_frame_header and migrate to struct ssp_frame_hdr. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index f2d5ca1..156694f 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -133,45 +133,6 @@ enum sci_sas_frame_type { SCI_SAS_TASK_FRAME = 0x16 }; -/** - * struct sci_ssp_frame_header - This structure depicts the contents of an SSP - * frame header. For specific information on the individual fields please - * reference the SAS specification transport layer SSP frame format. - * - * - */ -struct sci_ssp_frame_header { - /* Word 0 */ - u32 hashed_destination_address:24; - u32 frame_type:8; - - /* Word 1 */ - u32 hashed_source_address:24; - u32 reserved1_0:8; - - /* Word 2 */ - u32 reserved2_2:6; - u32 fill_bytes:2; - u32 reserved2_1:3; - u32 tlr_control:2; - u32 retry_data_frames:1; - u32 retransmit:1; - u32 changing_data_pointer:1; - u32 reserved2_0:16; - - /* Word 3 */ - u32 uiResv4; - - /* Word 4 */ - u16 target_port_transfer_tag; - u16 tag; - - /* Word 5 */ - u32 data_offset; - -}; - - #define PHY_OPERATION_NOP 0x00 #define PHY_OPERATION_LINK_RESET 0x01 #define PHY_OPERATION_HARD_RESET 0x02 diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 0b76fc7..3fe73cb 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1619,25 +1619,9 @@ struct scu_task_context *scic_sds_controller_get_task_context_buffer( return NULL; } -/** - * This method returnst the sequence value from the io tag value - * @scic: - * @io_tag: - * - * u16 - */ - -/** - * This method returns the IO request associated with the tag value - * @scic: - * @io_tag: - * - * SCIC_SDS_IO_REQUEST_T* NULL if there is no valid IO request at the tag value - */ -struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( - struct scic_sds_controller *scic, - u16 io_tag - ) { +struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, + u16 io_tag) +{ u16 task_index; u16 task_sequence; diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 8e3240d..08aee06 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -556,10 +556,8 @@ union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffe struct scic_sds_controller *this_controller, u16 node_id); -struct scic_sds_request *scic_sds_controller_get_io_request_from_tag( - struct scic_sds_controller *this_controller, - u16 io_tag); - +struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, + u16 io_tag); struct scu_task_context *scic_sds_controller_get_task_context_buffer( struct scic_sds_controller *this_controller, diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index e9c69d4..f34ca3d 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1265,14 +1265,19 @@ scic_sds_request_started_state_frame_handler(struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; - struct sci_ssp_frame_header *frame_header; + u32 *frame_header; + struct ssp_frame_hdr ssp_hdr; + ssize_t word_cnt; status = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_request_get_controller(sci_req)->uf_control), frame_index, (void **)&frame_header); - if (frame_header->frame_type == SCI_SAS_RESPONSE_FRAME) { + word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32); + sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt); + + if (ssp_hdr.frame_type == SSP_RESPONSE) { struct ssp_response_iu *resp_iu; ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); @@ -1303,7 +1308,7 @@ scic_sds_request_started_state_frame_handler(struct scic_sds_request *sci_req, __func__, sci_req, frame_index, - frame_header->frame_type); + ssp_hdr.frame_type); } /* diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index e766b27..89cdd0a 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -52,6 +52,7 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include "intel_sas.h" #include "sas.h" #include "isci.h" @@ -305,15 +306,20 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: { struct scic_sds_request *sci_req; - struct sci_ssp_frame_header *hdr; + struct ssp_frame_hdr hdr; + void *frame_header; + ssize_t word_cnt; status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, frame_index, - (void **)&hdr); + &frame_header); if (status != SCI_SUCCESS) return status; - sci_req = scic_sds_controller_get_io_request_from_tag(scic, hdr->tag); + word_cnt = sizeof(hdr) / sizeof(u32); + sci_swab32_cpy(&hdr, frame_header, word_cnt); + + sci_req = scic_request_by_tag(scic, be16_to_cpu(hdr.tag)); if (sci_req && sci_req->target_device == sci_dev) { /* The IO request is now in charge of releasing the frame */ status = sci_req->state_handlers->frame_handler(sci_req, -- cgit v0.10.2 From 8694e79287ad92e351feceededeb6804babb6d9a Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 May 2011 19:01:01 -0700 Subject: isci: removing intel_*.h headers Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h deleted file mode 100644 index 156694f..0000000 --- a/drivers/scsi/isci/core/intel_sas.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _INTEL_SAS_H_ -#define _INTEL_SAS_H_ - -/** - * This file contains all of the definitions relating to structures, constants, - * etc. defined by the SAS specification. - * - * - */ -#include -#include "intel_scsi.h" - -/** - * struct sci_sas_address - This structure depicts how a SAS address is - * represented by SCI. - * - * - */ -struct sci_sas_address { - /** - * This member contains the higher 32-bits of the SAS address. - */ - u32 high; - - /** - * This member contains the lower 32-bits of the SAS address. - */ - u32 low; - -}; - -/** - * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS - * specification defined task attribute values for a command information - * unit. - * - * - */ -enum sci_sas_task_attribute { - SCI_SAS_SIMPLE_ATTRIBUTE = 0, - SCI_SAS_HEAD_OF_QUEUE_ATTRIBUTE = 1, - SCI_SAS_ORDERED_ATTRIBUTE = 2, - SCI_SAS_ACA_ATTRIBUTE = 4, -}; - -/** - * enum _SCI_SAS_TASK_MGMT_FUNCTION - This enumeration depicts the SAM/SAS - * specification defined task management functions. - * - * This HARD_RESET function listed here is not actually defined as a task - * management function in the industry standard. - */ -enum sci_sas_task_mgmt_function { - SCI_SAS_ABORT_TASK = SCSI_TASK_REQUEST_ABORT_TASK, - SCI_SAS_ABORT_TASK_SET = SCSI_TASK_REQUEST_ABORT_TASK_SET, - SCI_SAS_CLEAR_TASK_SET = SCSI_TASK_REQUEST_CLEAR_TASK_SET, - SCI_SAS_LOGICAL_UNIT_RESET = SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET, - SCI_SAS_I_T_NEXUS_RESET = SCSI_TASK_REQUEST_I_T_NEXUS_RESET, - SCI_SAS_CLEAR_ACA = SCSI_TASK_REQUEST_CLEAR_ACA, - SCI_SAS_QUERY_TASK = SCSI_TASK_REQUEST_QUERY_TASK, - SCI_SAS_QUERY_TASK_SET = SCSI_TASK_REQUEST_QUERY_TASK_SET, - SCI_SAS_QUERY_ASYNCHRONOUS_EVENT = SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION, - SCI_SAS_HARD_RESET = 0xFF -}; - - -/** - * enum _SCI_SAS_FRAME_TYPE - This enumeration depicts the SAS specification - * defined SSP frame types. - * - * - */ -enum sci_sas_frame_type { - SCI_SAS_DATA_FRAME = 0x01, - SCI_SAS_XFER_RDY_FRAME = 0x05, - SCI_SAS_COMMAND_FRAME = 0x06, - SCI_SAS_RESPONSE_FRAME = 0x07, - SCI_SAS_TASK_FRAME = 0x16 -}; - -#define PHY_OPERATION_NOP 0x00 -#define PHY_OPERATION_LINK_RESET 0x01 -#define PHY_OPERATION_HARD_RESET 0x02 -#define PHY_OPERATION_DISABLE 0x03 -#define PHY_OPERATION_CLEAR_ERROR_LOG 0x05 -#define PHY_OPERATION_CLEAR_AFFILIATION 0x06 - -#define NPLR_PHY_ENABLED_UNK_LINK_RATE 0x00 -#define NPLR_PHY_DISABLED 0x01 -#define NPLR_PHY_ENABLED_SPD_NEG_FAILED 0x02 -#define NPLR_PHY_ENABLED_SATA_HOLD 0x03 -#define NPLR_PHY_ENABLED_1_5G 0x08 -#define NPLR_PHY_ENABLED_3_0G 0x09 - -/* SMP Function Result values. */ -#define SMP_RESULT_FUNCTION_ACCEPTED 0x00 -#define SMP_RESULT_UNKNOWN_FUNCTION 0x01 -#define SMP_RESULT_FUNCTION_FAILED 0x02 -#define SMP_RESULT_INVALID_REQUEST_FRAME_LEN 0x03 -#define SMP_RESULT_INAVALID_EXPANDER_CHANGE_COUNT 0x04 -#define SMP_RESULT_BUSY 0x05 -#define SMP_RESULT_INCOMPLETE_DESCRIPTOR_LIST 0x06 -#define SMP_RESULT_PHY_DOES_NOT_EXIST 0x10 -#define SMP_RESULT_INDEX_DOES_NOT_EXIST 0x11 -#define SMP_RESULT_PHY_DOES_NOT_SUPPORT_SATA 0x12 -#define SMP_RESULT_UNKNOWN_PHY_OPERATION 0x13 -#define SMP_RESULT_UNKNOWN_PHY_TEST_FUNCTION 0x14 -#define SMP_RESULT_PHY_TEST_IN_PROGRESS 0x15 -#define SMP_RESULT_PHY_VACANT 0x16 - -/* Attached Device Types */ -#define SMP_NO_DEVICE_ATTACHED 0 -#define SMP_END_DEVICE_ONLY 1 -#define SMP_EDGE_EXPANDER_DEVICE 2 -#define SMP_FANOUT_EXPANDER_DEVICE 3 - -/* Expander phy routine attribute */ -#define DIRECT_ROUTING_ATTRIBUTE 0 -#define SUBTRACTIVE_ROUTING_ATTRIBUTE 1 -#define TABLE_ROUTING_ATTRIBUTE 2 - -#endif /* _INTEL_SAS_H_ */ - diff --git a/drivers/scsi/isci/core/intel_scsi.h b/drivers/scsi/isci/core/intel_scsi.h deleted file mode 100644 index 1e45d3c..0000000 --- a/drivers/scsi/isci/core/intel_scsi.h +++ /dev/null @@ -1,474 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file defines all of the SCSI related constants, enumerations, and - * types. Please note that this file does not necessarily contain an - * exhaustive list of all constants, commands, sub-commands, etc. - * - * - */ - -#ifndef _SCSI_H__ -#define _SCSI_H__ - - -/* - * ****************************************************************************** - * * C O N S T A N T S A N D M A C R O S - * ****************************************************************************** */ - -/** - * enum _SCSI_TASK_MGMT_REQUEST_CODES - This enumberation contains the - * constants to be used for SCSI task management request codes. SAM does - * not specify any particular values for these codes so constants used here - * are the same as those specified in SAS. - * - * - */ -enum scsi_task_mgmt_request_codes { - SCSI_TASK_REQUEST_ABORT_TASK = 0x01, - SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02, - SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04, - SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08, - SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10, - SCSI_TASK_REQUEST_CLEAR_ACA = 0x40, - SCSI_TASK_REQUEST_QUERY_TASK = 0x80, - SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81, - SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82, - -}; - -/** - * enum _SCSI_TASK_MGMT_RESPONSE_CODES - This enumeration contains all of the - * SCSI task management response codes. - * - * - */ -enum scsi_task_mgmt_response_codes { - SCSI_TASK_MGMT_FUNC_COMPLETE = 0, - SCSI_INVALID_FRAME = 2, - SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4, - SCSI_TASK_MGMT_FUNC_FAILED = 5, - SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8, - SCSI_INVALID_LUN = 9 -}; - -/** - * enum _SCSI_SENSE_RESPONSE_CODE - this enumeration depicts the types of sense - * data responses as per SPC-3. - * - * - */ -enum scsi_sense_response_code { - SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70, - SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71, - SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72, - SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73 - -}; - -/* - * This constant represents the valid bit located in byte 0 of a FIXED - * format sense data. */ -#define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80 - -#define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18 - -/* This value is used in the DATAPRES field of the SCSI Response IU. */ -#define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02 - -/** - * - * - * SCSI_SENSE_KEYS These constants delineate all of the SCSI protocol sense key - * constants - */ -#define SCSI_SENSE_NO_SENSE 0x00 -#define SCSI_SENSE_RECOVERED_ERROR 0x01 -#define SCSI_SENSE_NOT_READY 0x02 -#define SCSI_SENSE_MEDIUM_ERROR 0x03 -#define SCSI_SENSE_HARDWARE_ERROR 0x04 -#define SCSI_SENSE_ILLEGAL_REQUEST 0x05 -#define SCSI_SENSE_UNIT_ATTENTION 0x06 -#define SCSI_SENSE_DATA_PROTECT 0x07 -#define SCSI_SENSE_BLANK_CHECK 0x08 -#define SCSI_SENSE_VENDOR_SPECIFIC 0x09 -#define SCSI_SENSE_COPY_ABORTED 0x0A -#define SCSI_SENSE_ABORTED_COMMAND 0x0B -#define SCSI_SENSE_VOLUME_OVERFLOW 0x0D -#define SCSI_SENSE_MISCOMPARE 0x0E - -/** - * - * - * SCSI_ADDITIONAL_SENSE_CODES These constants delineate all of the SCSI - * protocol additional sense code constants. - */ -#define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00 -#define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04 -#define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04 -#define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04 -#define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05 -#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11 -#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20 -#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21 -#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24 -#define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26 -#define SCSI_ASC_WRITE_PROTECTED 0x27 -#define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28 -#define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39 -#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A -#define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44 -#define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47 -#define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A -#define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C -#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53 -#define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D -#define SCSI_ASC_POWER_STATE_CHANGE 0x5E -#define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40 -#define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67 - -/** - * - * - * SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS This enumeration contains all of the - * used SCSI protocol additional sense code qualifier constants. - */ -#define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00 -#define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00 -#define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00 -#define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00 -#define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00 -#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00 -#define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00 -#define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00 -#define SCSI_ASCQ_WRITE_PROTECTED 0x00 -#define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00 -#define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00 -#define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00 -#define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01 -#define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02 -#define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03 -#define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04 -#define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09 -#define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10 -#define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03 -#define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04 -#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42 -#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43 -#define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B -#define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04 - - - -/** - * - * - * SCSI_STATUS_CODES These constants define all of the used SCSI status values. - */ -#define SCSI_STATUS_GOOD 0x00 -#define SCSI_STATUS_CHECK_CONDITION 0x02 -#define SCSI_STATUS_CONDITION_MET 0x04 -#define SCSI_STATUS_BUSY 0x08 -#define SCSI_STATUS_TASKFULL 0x28 -#define SCSI_STATUS_ACA 0x30 -#define SCSI_STATUS_ABORT 0x40 - -/** - * - * - * SCSI_OPERATION_CODES These constants delineate all of the SCSI - * command/operation codes. - */ -#define SCSI_INQUIRY 0x12 -#define SCSI_READ_CAPACITY_10 0x25 -#define SCSI_SERVICE_ACTION_IN_16 0x9E -#define SCSI_TEST_UNIT_READY 0x00 -#define SCSI_START_STOP_UNIT 0x1B -#define SCSI_SYNCHRONIZE_CACHE_10 0x35 -#define SCSI_SYNCHRONIZE_CACHE_16 0x91 -#define SCSI_REQUEST_SENSE 0x03 -#define SCSI_REPORT_LUNS 0xA0 -#define SCSI_REASSIGN_BLOCKS 0x07 -#define SCSI_READ_6 0x08 -#define SCSI_READ_10 0x28 -#define SCSI_READ_12 0xA8 -#define SCSI_READ_16 0x88 -#define SCSI_WRITE_6 0x0A -#define SCSI_WRITE_10 0x2A -#define SCSI_WRITE_12 0xAA -#define SCSI_WRITE_16 0x8A -#define SCSI_VERIFY_10 0x2F -#define SCSI_VERIFY_12 0xAF -#define SCSI_VERIFY_16 0x8F -#define SCSI_SEEK_6 0x01 -#define SCSI_SEEK_10 0x02 -#define SCSI_WRITE_VERIFY 0x2E -#define SCSI_FORMAT_UNIT 0x04 -#define SCSI_READ_BUFFER 0x3C -#define SCSI_WRITE_BUFFER 0x3B -#define SCSI_SEND_DIAGNOSTIC 0x1D -#define SCSI_RECEIVE_DIAGNOSTIC 0x1C -#define SCSI_MODE_SENSE_6 0x1A -#define SCSI_MODE_SENSE_10 0x5A -#define SCSI_MODE_SELECT_6 0x15 -#define SCSI_MODE_SELECT_10 0x55 -#define SCSI_MAINTENANCE_IN 0xA3 -#define SCSI_LOG_SENSE 0x4D -#define SCSI_LOG_SELECT 0x4C -#define SCSI_RESERVE_6 0x16 -#define SCSI_RESERVE_10 0x56 -#define SCSI_RELEASE_6 0x17 -#define SCSI_RELEASE_10 0x57 -#define SCSI_ATA_PASSTHRU_12 0xA1 -#define SCSI_ATA_PASSTHRU_16 0x85 -#define SCSI_WRITE_LONG_10 0x3F -#define SCSI_WRITE_LONG_16 0x9F -#define SCSI_PERSISTENT_RESERVE_IN 0x5E -#define SCSI_PERSISTENT_RESERVE_OUT 0x5F - -/** - * - * - * SCSI_SERVICE_ACTION_IN_CODES Service action in operations. - */ -#define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10 - -#define SCSI_SERVICE_ACTION_MASK 0x1f - -/** - * - * - * SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES MAINTENANCE IN service action codes. - */ -#define SCSI_REPORT_TASK_MGMT 0x0D -#define SCSI_REPORT_OP_CODES 0x0C - -/** - * - * - * SCSI_MODE_PAGE_CONTROLS These constants delineate all of the used SCSI Mode - * Page control values. - */ -#define SCSI_MODE_SENSE_PC_CURRENT 0x0 -#define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1 -#define SCSI_MODE_SENSE_PC_DEFAULT 0x2 -#define SCSI_MODE_SENSE_PC_SAVED 0x3 - -#define SCSI_MODE_SENSE_PC_SHIFT 0x06 -#define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F -#define SCSI_MODE_SENSE_DBD_ENABLE 0x08 -#define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10 - -/** - * - * - * SCSI_MODE_PAGE_CODES These constants delineate all of the used SCSI Mode - * Page codes. - */ -#define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01 -#define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02 -#define SCSI_MODE_PAGE_CACHING 0x08 -#define SCSI_MODE_PAGE_CONTROL 0x0A -#define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19 -#define SCSI_MODE_PAGE_POWER_CONDITION 0x1A -#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C -#define SCSI_MODE_PAGE_ALL_PAGES 0x3F - -#define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF -#define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0 -#define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1 -#define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04 -#define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20 -#define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08 -#define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10 -#define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1 -#define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2 - -#define SCSI_MODE_SENSE_6_HEADER_LENGTH 4 -#define SCSI_MODE_SENSE_10_HEADER_LENGTH 8 -#define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8 -#define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16 - -#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08 -#define SCSI_MODE_PAGE_19_SAS_ID 0x6 -#define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1 -#define SCSI_MODE_PAGE_19_SUB1_PC 0x59 - -#define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00 - -/* Mode Select constrains related masks value */ -#define SCSI_MODE_SELECT_PF_BIT 0x1 -#define SCSI_MODE_SELECT_PF_MASK 0x10 -#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6 -#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F -#define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40 -#define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80 -#define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40 -#define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F -#define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1 -#define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84 -#define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1 -#define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xF0 -#define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38 -#define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47 - - -#define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04 -#define SCSI_MOVE_FUA_BIT_ENABLE 0x08 -#define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01 -#define SCSI_READ_CAPACITY_10_DATA_LENGTH 8 -#define SCSI_READ_CAPACITY_16_DATA_LENGTH 32 - -/* Inquiry constants */ -#define SCSI_INQUIRY_EVPD_ENABLE 0x01 -#define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02 -#define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00 -#define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80 -#define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83 -#define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89 -#define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1 -#define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C -#define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 /* 36 */ - -#define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC /* 252 */ - -/** Defines the log page codes that are use in gathing Smart data - */ -#define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00 -#define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F -#define SCSI_LOG_PAGE_SELF_TEST 0x10 - -/** - * - * - * SCSI_INQUIRY_VPD The following are constants used with vital product data - * inquiry pages. Values are already shifted into the proper nibble location. - */ -#define SCSI_PIV_ENABLE 0x80 -#define SCSI_LUN_ASSOCIATION 0x00 -#define SCSI_TARGET_PORT_ASSOCIATION 0x10 - -#define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00 -#define SCSI_NAA_IDENTIFIER_TYPE 0x03 - -#define SCSI_T10_IDENTIFIER_TYPE 0x01 -#define SCSI_BINARY_CODE_SET 0x01 -#define SCSI_ASCII_CODE_SET 0x02 -#define SCSI_FC_PROTOCOL_IDENTIFIER 0x00 -#define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60 - -#define SCSI_VERIFY_BYTCHK_ENABLED 0x02 - -#define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02 -/** - * - * - * SCSI_START_STOP_UNIT_POWER_CONDITION_CODES The following are SCSI Start Stop - * Unit command Power Condition codes. - */ -#define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0 -#define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1 -#define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2 -#define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3 -#define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7 -#define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB - -#define SCSI_START_STOP_UNIT_IMMED_MASK 0x1 -#define SCSI_START_STOP_UNIT_IMMED_SHIFT 0 - -#define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1 -#define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0 - -#define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2 -#define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1 - -#define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4 -#define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2 - -#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF -#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0 - -#define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0 -#define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4 - -#define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0 -#define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6 - -#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F -#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0 - -/** - * - * - * MRIE - Method of reporting informational exceptions codes - */ -#define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0 -#define ASYNCHRONOUS_EVENT_REPORTING 0x1 -#define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2 -#define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3 -#define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4 -#define GENERATE_NO_SENSE 0x5 -#define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6 - -#define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08 - -/* Reassign Blocks masks */ -#define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02 -#define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01 - -#endif /* _SCSI_H_ */ - diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index 716abfc..ea09d0b 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -66,7 +66,6 @@ #include "sci_status.h" -#include "intel_sas.h" #include "sci_controller_constants.h" #include "probe_roms.h" diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h index 1602263..6ddf380 100644 --- a/drivers/scsi/isci/core/scic_io_request.h +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -63,9 +63,8 @@ * Determine the failure situations and return values. */ - +#include #include "sci_status.h" -#include "intel_sas.h" struct scic_sds_request; struct scic_sds_remote_device; @@ -110,8 +109,7 @@ typedef enum { * * Return the size of the SCI IO request object. */ -u32 scic_io_request_get_object_size( - void); +u32 scic_io_request_get_object_size(void); /** * scic_io_request_construct() - This method is called by the SCI user to diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 451d797..1fb49f0 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -67,7 +67,6 @@ #include #include #include "sci_status.h" -#include "intel_sas.h" struct scic_sds_phy; struct scic_sds_port; diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index 4ae9b6c..44a8ea8 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -56,9 +56,9 @@ #ifndef _SCIC_PORT_H_ #define _SCIC_PORT_H_ +#include "sas.h" #include "sci_status.h" #include "scic_phy.h" -#include "intel_sas.h" struct scic_sds_port; diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index b0cebdc..b6a0ed1 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -56,7 +56,7 @@ #ifndef _SCIC_SDS_PHY_H_ #define _SCIC_SDS_PHY_H_ -#include "intel_sas.h" +#include "sas.h" #include "scic_phy.h" #include "scu_registers.h" #include "sci_base_state_machine.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 05bc3bf..0c89fc1 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -53,8 +53,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "sas.h" -#include "intel_sas.h" #include "scic_controller.h" #include "scic_phy.h" #include "scic_port.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 2253a2c..115cbe3 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -57,8 +57,8 @@ #define _SCIC_SDS_PORT_H_ #include +#include "sas.h" #include "sci_controller_constants.h" -#include "intel_sas.h" #include "scu_registers.h" #define SCIC_SDS_DUMMY_PORT 0xFF diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index f34ca3d..85e40ce 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -54,8 +54,6 @@ */ #include -#include "sas.h" -#include "intel_sas.h" #include "scic_controller.h" #include "scic_io_request.h" #include "scic_sds_controller.h" @@ -503,7 +501,7 @@ static void scu_ssp_io_request_construct_task_context( task_context->ssp_command_iu_length = sizeof(struct ssp_cmd_iu) / sizeof(u32); - task_context->type.ssp.frame_type = SCI_SAS_COMMAND_FRAME; + task_context->type.ssp.frame_type = SSP_COMMAND; switch (dir) { case DMA_FROM_DEVICE: @@ -573,7 +571,7 @@ static void scu_ssp_task_request_construct_task_context( task_context->priority = SCU_TASK_PRIORITY_HIGH; task_context->task_type = SCU_TASK_TYPE_RAW_FRAME; task_context->transfer_length_bytes = 0; - task_context->type.ssp.frame_type = SCI_SAS_TASK_FRAME; + task_context->type.ssp.frame_type = SSP_TASK; task_context->ssp_command_iu_length = sizeof(struct ssp_task_iu) / sizeof(u32); } diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 11d5a3e..b83d893 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -66,7 +66,6 @@ #include "scic_io_request.h" #include "sci_base_state_machine.h" #include "scu_task_context.h" -#include "intel_sas.h" struct scic_sds_controller; struct scic_sds_remote_device; diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index bca51a7..1f8773d 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -54,8 +54,6 @@ */ #include -#include "sas.h" -#include "intel_sas.h" #include "sci_base_state_machine.h" #include "scic_controller.h" #include "scic_sds_controller.h" diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.h b/drivers/scsi/isci/core/scic_sds_smp_request.h index 8f34ffe..f432b7a 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.h +++ b/drivers/scsi/isci/core/scic_sds_smp_request.h @@ -55,7 +55,6 @@ #ifndef _SCIC_SDS_SMP_REQUEST_T_ #define _SCIC_SDS_SMP_REQUEST_T_ -#include "intel_sas.h" #include "scic_sds_request.h" diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index 7183ae3..18bf387 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -53,7 +53,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "intel_sas.h" #include "sci_base_state_machine.h" #include "scic_controller.h" #include "scic_sds_controller.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h index 5d45ef6..e94d689 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h @@ -55,7 +55,6 @@ #ifndef _SCIC_SDS_STP_PACKET_REQUEST_H_ #define _SCIC_SDS_STP_PACKET_REQUEST_H_ -#include "intel_sas.h" #include "scic_sds_stp_request.h" /** diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 89cdd0a..15c1e6c 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -53,8 +53,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include -#include "intel_sas.h" -#include "sas.h" #include "isci.h" #include "port.h" #include "remote_device.h" diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 18f7f96..c7db499 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -57,7 +57,6 @@ #define _ISCI_REMOTE_DEVICE_H_ #include #include "sci_status.h" -#include "intel_sas.h" #include "scu_remote_node_context.h" #include "remote_node_context.h" #include "port.h" diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h index 83eab46..822a8db 100644 --- a/drivers/scsi/isci/sas.h +++ b/drivers/scsi/isci/sas.h @@ -215,4 +215,14 @@ struct smp_req { #define SMP_RESP_HDR_SZ 4 +/* + * struct sci_sas_address - This structure depicts how a SAS address is + * represented by SCI. + * XXX convert this to u8 [SAS_ADDR_SIZE] like the rest of libsas + * + */ +struct sci_sas_address { + u32 high; + u32 low; +}; #endif -- cgit v0.10.2 From 5b3f2bd877382eaf4b5a7d90fdec72ef14b9ec97 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 May 2011 17:47:44 -0700 Subject: isci: fix ata locking Upstream commit a29b5dad "libata: fix locking for sas paths" switched libsas ata locking to the ata_host lock. We need to do the same when returning ata tasks from the execute path. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 77cc54d..aa24586 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -344,26 +344,26 @@ isci_task_set_completion_status( * @status: This parameter is the status code for the completed task. * */ -static inline void isci_execpath_callback( - struct isci_host *ihost, - struct sas_task *task, - void (*func)(struct sas_task *)) +static inline void isci_execpath_callback(struct isci_host *ihost, + struct sas_task *task, + void (*func)(struct sas_task *)) { - unsigned long flags; + struct domain_device *dev = task->dev; + + if (dev_is_sata(dev) && task->uldd_task) { + unsigned long flags; - if (dev_is_sata(task->dev) && task->uldd_task) { /* Since we are still in the submit path, and since - * libsas takes the host lock on behalf of SATA - * devices before I/O starts (in the non-discovery case), - * we need to unlock before we can call the callback function. - */ + * libsas takes the host lock on behalf of SATA + * devices before I/O starts (in the non-discovery case), + * we need to unlock before we can call the callback function. + */ raw_local_irq_save(flags); - spin_unlock(ihost->shost->host_lock); + spin_unlock(dev->sata_dev.ap->lock); func(task); - spin_lock(ihost->shost->host_lock); + spin_lock(dev->sata_dev.ap->lock); raw_local_irq_restore(flags); } else func(task); } - #endif /* !defined(_SCI_TASK_H_) */ -- cgit v0.10.2 From d06b487b78f28a02efdcdcc9ec295bf230b9d0e8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 2 May 2011 13:59:25 -0700 Subject: isci: implement I_T_nexus_reset This is a requirement for 2.6.39's new libata eh. Still some questions about lldd_dev_gone racing against dev->lldd_dev lookups, but we are at least no more broken than mvsas in this regard. We also short-circuit I_T_nexus_reset invocations from the device discovery path (IDEV_EH similar to MVS_DEV_EH) to filter out the resulting domain rediscoveries triggered by the reset. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 15c1e6c..ee6fe1d 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -891,6 +891,7 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ clear_bit(IDEV_START_PENDING, &idev->flags); clear_bit(IDEV_STOP_PENDING, &idev->flags); + clear_bit(IDEV_EH, &idev->flags); wake_up(&ihost->eventq); } diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index c7db499..2e433b7 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -134,6 +134,7 @@ struct isci_remote_device { #define IDEV_START_PENDING 0 #define IDEV_STOP_PENDING 1 #define IDEV_ALLOCATED 2 + #define IDEV_EH 3 unsigned long flags; struct isci_port *isci_port; struct domain_device *domain_dev; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 8449d8a..3a3f546 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1022,9 +1022,11 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", __func__, domain_device, isci_host, isci_device); - if (isci_device != NULL) + if (isci_device != NULL) { device_stopping = (isci_device->status == isci_stopping) || (isci_device->status == isci_stopped); + set_bit(IDEV_EH, &isci_device->flags); + } /* If there is a device reset pending on any request in the * device's list, fail this LUN reset request in order to @@ -1069,12 +1071,6 @@ int isci_task_clear_nexus_ha(struct sas_ha_struct *ha) return TMF_RESP_FUNC_FAILED; } -int isci_task_I_T_nexus_reset(struct domain_device *dev) -{ - return TMF_RESP_FUNC_FAILED; -} - - /* Task Management Functions. Must be called from process context. */ /** @@ -1171,6 +1167,12 @@ int isci_task_abort_task(struct sas_task *task) device_stopping = (isci_device->status == isci_stopping) || (isci_device->status == isci_stopped); + /* XXX need to fix device lookup lifetime (needs to be done + * under scic_lock, among other things...), but for now assume + * the device is available like the above code + */ + set_bit(IDEV_EH, &isci_device->flags); + /* This version of the driver will fail abort requests for * SATA/STP. Failing the abort request this way will cause the * SCSI error handler thread to escalate to LUN reset @@ -1481,86 +1483,94 @@ isci_task_request_complete(struct isci_host *ihost, complete(tmf_complete); } -/** - * isci_bus_reset_handler() - This function performs a target reset of the - * device referenced by "cmd'. This function is exported through the - * "struct scsi_host_template" structure such that it is called when an I/O - * recovery process has escalated to a target reset. Note that this function - * is called from the scsi error handler event thread, so may block on calls. - * @scsi_cmd: This parameter specifies the target to be reset. - * - * SUCCESS if the reset process was successful, else FAILED. - */ -int isci_bus_reset_handler(struct scsi_cmnd *cmd) +static int isci_reset_device(struct domain_device *dev, int hard_reset) { - struct domain_device *dev = cmd_to_domain_dev(cmd); - struct isci_host *isci_host = dev_to_ihost(dev); - unsigned long flags = 0; + struct isci_remote_device *idev = dev->lldd_dev; + struct sas_phy *phy = sas_find_local_phy(dev); + struct isci_host *ihost = dev_to_ihost(dev); enum sci_status status; - int base_status; - struct isci_remote_device *isci_dev = dev->lldd_dev; + unsigned long flags; + int rc; - dev_dbg(&isci_host->pdev->dev, - "%s: cmd %p, isci_dev %p\n", - __func__, cmd, isci_dev); + dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); - if (!isci_dev) { - dev_warn(&isci_host->pdev->dev, - "%s: isci_dev is GONE!\n", + if (!idev) { + dev_warn(&ihost->pdev->dev, + "%s: idev is GONE!\n", __func__); return TMF_RESP_FUNC_COMPLETE; /* Nothing to reset. */ } - spin_lock_irqsave(&isci_host->scic_lock, flags); - status = scic_remote_device_reset(&isci_dev->sci); + spin_lock_irqsave(&ihost->scic_lock, flags); + status = scic_remote_device_reset(&idev->sci); if (status != SCI_SUCCESS) { - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); - scmd_printk(KERN_WARNING, cmd, - "%s: scic_remote_device_reset(%p) returned %d!\n", - __func__, isci_dev, status); + dev_warn(&ihost->pdev->dev, + "%s: scic_remote_device_reset(%p) returned %d!\n", + __func__, idev, status); return TMF_RESP_FUNC_FAILED; } - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Make sure all pending requests are able to be fully terminated. */ - isci_device_clear_reset_pending(isci_host, isci_dev); + isci_device_clear_reset_pending(ihost, idev); - /* Terminate in-progress I/O now. */ - isci_remote_device_nuke_requests(isci_host, isci_dev); + rc = sas_phy_reset(phy, hard_reset); + msleep(2000); /* just like mvsas */ - /* Call into the libsas default handler (which calls sas_phy_reset). */ - base_status = sas_eh_bus_reset_handler(cmd); + /* Terminate in-progress I/O now. */ + isci_remote_device_nuke_requests(ihost, idev); - if (base_status != SUCCESS) { + spin_lock_irqsave(&ihost->scic_lock, flags); + status = scic_remote_device_reset_complete(&idev->sci); + spin_unlock_irqrestore(&ihost->scic_lock, flags); - /* There can be cases where the resets to individual devices - * behind an expander will fail because of an unplug of the - * expander itself. - */ - scmd_printk(KERN_WARNING, cmd, - "%s: sas_eh_bus_reset_handler(%p) returned %d!\n", - __func__, cmd, base_status); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: scic_remote_device_reset_complete(%p) " + "returned %d!\n", __func__, idev, status); } - /* WHAT TO DO HERE IF sas_phy_reset FAILS? */ - spin_lock_irqsave(&isci_host->scic_lock, flags); - status = scic_remote_device_reset_complete(&isci_dev->sci); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + dev_dbg(&ihost->pdev->dev, "%s: idev %p complete.\n", __func__, idev); - if (status != SCI_SUCCESS) { - scmd_printk(KERN_WARNING, cmd, - "%s: scic_remote_device_reset_complete(%p) " - "returned %d!\n", - __func__, isci_dev, status); - } - /* WHAT TO DO HERE IF scic_remote_device_reset_complete FAILS? */ + return rc; +} - dev_dbg(&isci_host->pdev->dev, - "%s: cmd %p, isci_dev %p complete.\n", - __func__, cmd, isci_dev); +int isci_task_I_T_nexus_reset(struct domain_device *dev) +{ + struct isci_host *ihost = dev_to_ihost(dev); + int ret = TMF_RESP_FUNC_FAILED, hard_reset = 1; + struct isci_remote_device *idev; + unsigned long flags; + + /* XXX mvsas is not protecting against ->lldd_dev_gone(), are we + * being too paranoid, or is mvsas busted?! + */ + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = dev->lldd_dev; + if (!idev || !test_bit(IDEV_EH, &idev->flags)) + ret = TMF_RESP_FUNC_COMPLETE; + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (ret == TMF_RESP_FUNC_COMPLETE) + return ret; + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) + hard_reset = 0; + + return isci_reset_device(dev, hard_reset); +} + +int isci_bus_reset_handler(struct scsi_cmnd *cmd) +{ + struct domain_device *dev = sdev_to_domain_dev(cmd->device); + int hard_reset = 1; + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) + hard_reset = 0; - return TMF_RESP_FUNC_COMPLETE; + return isci_reset_device(dev, hard_reset); } -- cgit v0.10.2 From cc3dbd0a9178865d4444f8e28b51715808e9ac85 Mon Sep 17 00:00:00 2001 From: Artur Wojcik Date: Wed, 4 May 2011 07:58:16 +0000 Subject: isci: unify isci_host data structures Make it explicit that isci_host and scic_sds_controller are one in the same object. Signed-off-by: Artur Wojcik [removed ->ihost back pointer] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 3fe73cb..ea51041 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -214,7 +214,7 @@ static void scic_sds_controller_power_control_timer_handler( static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) { - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); scic->power_control.timer = isci_timer_create(ihost, scic, scic_sds_controller_power_control_timer_handler); @@ -585,7 +585,7 @@ static void scic_sds_controller_transition_to_ready( struct scic_sds_controller *scic, enum sci_status status) { - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); if (scic->state_machine.current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) { @@ -603,7 +603,7 @@ static void scic_sds_controller_transition_to_ready( static void scic_sds_controller_timeout_handler(void *_scic) { struct scic_sds_controller *scic = _scic; - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); struct sci_base_state_machine *sm = &scic->state_machine; if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) @@ -771,7 +771,7 @@ static void scic_sds_controller_phy_startup_timeout_handler(void *_scic) static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) { - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); scic->phy_startup_timer = isci_timer_create(ihost, scic, @@ -1775,7 +1775,7 @@ void scic_sds_controller_release_frame( */ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) { - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); u16 index; /* Default to APC mode. */ @@ -2619,17 +2619,12 @@ static enum sci_status scic_controller_set_interrupt_coalescence( } -struct scic_sds_controller *scic_controller_alloc(struct device *dev) -{ - return devm_kzalloc(dev, sizeof(struct scic_sds_controller), GFP_KERNEL); -} -enum sci_status scic_controller_initialize( - struct scic_sds_controller *scic) +enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) { struct sci_base_state_machine *sm = &scic->state_machine; enum sci_status result = SCI_SUCCESS; - struct isci_host *ihost; + struct isci_host *ihost = scic_to_ihost(scic); u32 index, state; if (scic->state_machine.current_state_id != @@ -2640,9 +2635,6 @@ enum sci_status scic_controller_initialize( return SCI_FAILURE_INVALID_STATE; } - - ihost = scic->ihost; - sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); scic->timeout_timer = isci_timer_create(ihost, diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 08aee06..0a9bb8b 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -125,7 +125,6 @@ struct scic_power_control { }; -struct isci_host; /** * struct scic_sds_controller - * @@ -133,11 +132,6 @@ struct isci_host; */ struct scic_sds_controller { /** - * The field specifies that the peer object for the controller. - */ - struct isci_host *ihost; - - /** * This field contains the information for the base controller state * machine. */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 18dc14a..8f1e3db 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -339,7 +339,7 @@ enum sci_status scic_sds_phy_initialize( struct scu_link_layer_registers __iomem *link_layer_registers) { struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); /* Create the SIGNATURE FIS Timeout timer for this phy */ sci_phy->sata_timeout_timer = @@ -1790,7 +1790,7 @@ scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) struct scic_sds_controller *scic; scic = scic_sds_phy_get_controller(sci_phy), - ihost = scic->ihost; + ihost = scic_to_ihost(scic); /* Create the SIGNATURE FIS Timeout timer for this phy */ sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, @@ -2076,7 +2076,7 @@ static void scic_sds_phy_stopped_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); /* * @todo We need to get to the controller to place this PE in a diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 0c89fc1..04a56c5 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -625,7 +625,7 @@ static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, bool do_notify_user) { struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) scic_sds_phy_resume(sci_phy); @@ -644,7 +644,7 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, { struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_port *iport = sci_port->iport; - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); struct isci_phy *iphy = sci_phy->iphy; sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); @@ -667,12 +667,10 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, * This function will disable the phy and report that the phy is not valid for * this port object. None */ -static void scic_sds_port_invalid_link_up( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) +static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - struct scic_sds_controller *scic = - scic_sds_port_get_controller(sci_port); + struct scic_sds_controller *scic = sci_port->owning_controller; /* * Check to see if we have alreay reported this link as bad and if @@ -681,7 +679,7 @@ static void scic_sds_port_invalid_link_up( */ if ((scic->invalid_phy_mask & (1 << sci_phy->phy_index)) == 0) { scic_sds_controller_set_invalid_phy(scic, sci_phy); - isci_port_invalid_link_up(scic, sci_port, sci_phy); + dev_warn(&scic_to_ihost(scic)->pdev->dev, "Invalid link up!\n"); } } @@ -971,7 +969,7 @@ void scic_sds_port_broadcast_change_received( struct scic_sds_phy *sci_phy) { struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); /* notify the user. */ isci_port_bc_change_received(ihost, sci_port, sci_phy); @@ -1625,7 +1623,7 @@ static void scic_sds_port_ready_substate_operational_enter(void *object) struct scic_sds_port *sci_port = object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port->iport; scic_sds_port_set_ready_state_handlers( @@ -1666,7 +1664,7 @@ static void scic_sds_port_ready_substate_operational_exit(void *object) struct scic_sds_port *sci_port = object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port->iport; /* @@ -1697,7 +1695,7 @@ static void scic_sds_port_ready_substate_configuring_enter(void *object) struct scic_sds_port *sci_port = object; struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port->iport; scic_sds_port_set_ready_state_handlers( @@ -1784,7 +1782,7 @@ static enum sci_status scic_sds_port_stopped_state_start_handler(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); enum sci_status status = SCI_SUCCESS; u32 phy_mask; @@ -2259,16 +2257,12 @@ static void scic_sds_port_stopped_state_exit(void *object) */ static void scic_sds_port_ready_state_enter(void *object) { - struct scic_sds_controller *scic; struct scic_sds_port *sci_port = object; - struct isci_port *iport; - struct isci_host *ihost; + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + struct isci_port *iport = sci_port->iport; u32 prev_state; - scic = scic_sds_port_get_controller(sci_port); - ihost = scic->ihost; - iport = sci_port->iport; - /* Put the ready state handlers in place though they will not be there long */ scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY); diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index df257ff..6b1f4a0 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -808,20 +808,13 @@ void scic_sds_port_configuration_agent_construct( } } -/** - * - * @controller: This is the controller object for which the port agent is being - * initialized. - * - * This method will construct the port configuration agent for this controller. - */ enum sci_status scic_sds_port_configuration_agent_initialize( struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent) { enum sci_status status = SCI_SUCCESS; enum scic_port_configuration_mode mode; - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); mode = scic->oem_parameters.sds1.controller.mode_type; diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 85e40ce..6286dec 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -1545,7 +1545,7 @@ static void scic_sds_request_completed_state_enter(void *object) struct scic_sds_request *sci_req = object; struct scic_sds_controller *scic = scic_sds_request_get_controller(sci_req); - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); struct isci_request *ireq = sci_req->ireq; SET_STATE_HANDLER(sci_req, diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 55bfa3d..d180ad8 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -65,9 +65,8 @@ irqreturn_t isci_msix_isr(int vec, void *data) { struct isci_host *ihost = data; - struct scic_sds_controller *scic = ihost->core_controller; - if (scic_sds_controller_isr(scic)) + if (scic_sds_controller_isr(&ihost->sci)) tasklet_schedule(&ihost->completion_tasklet); return IRQ_HANDLED; @@ -77,7 +76,7 @@ irqreturn_t isci_intx_isr(int vec, void *data) { irqreturn_t ret = IRQ_NONE; struct isci_host *ihost = data; - struct scic_sds_controller *scic = ihost->core_controller; + struct scic_sds_controller *scic = &ihost->sci; if (scic_sds_controller_isr(scic)) { writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); @@ -96,10 +95,9 @@ irqreturn_t isci_intx_isr(int vec, void *data) irqreturn_t isci_error_isr(int vec, void *data) { struct isci_host *ihost = data; - struct scic_sds_controller *scic = ihost->core_controller; - if (scic_sds_controller_error_isr(scic)) - scic_sds_controller_error_handler(scic); + if (scic_sds_controller_error_isr(&ihost->sci)) + scic_sds_controller_error_handler(&ihost->sci); return IRQ_HANDLED; } @@ -145,21 +143,20 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) void isci_host_scan_start(struct Scsi_Host *shost) { struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; - struct scic_sds_controller *scic = ihost->core_controller; - unsigned long tmo = scic_controller_get_suggested_start_timeout(scic); + unsigned long tmo = scic_controller_get_suggested_start_timeout(&ihost->sci); set_bit(IHOST_START_PENDING, &ihost->flags); spin_lock_irq(&ihost->scic_lock); - scic_controller_start(scic, tmo); - scic_controller_enable_interrupts(scic); + scic_controller_start(&ihost->sci, tmo); + scic_controller_enable_interrupts(&ihost->sci); spin_unlock_irq(&ihost->scic_lock); } void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) { isci_host_change_state(ihost, isci_stopped); - scic_controller_disable_interrupts(ihost->core_controller); + scic_controller_disable_interrupts(&ihost->sci); clear_bit(IHOST_STOP_PENDING, &ihost->flags); wake_up(&ihost->eventq); } @@ -188,7 +185,7 @@ static void isci_host_completion_routine(unsigned long data) spin_lock_irq(&isci_host->scic_lock); - scic_sds_controller_completion_handler(isci_host->core_controller); + scic_sds_controller_completion_handler(&isci_host->sci); /* Take the lists of completed I/Os from the host. */ @@ -276,7 +273,6 @@ static void isci_host_completion_routine(unsigned long data) void isci_host_deinit(struct isci_host *ihost) { - struct scic_sds_controller *scic = ihost->core_controller; int i; isci_host_change_state(ihost, isci_stopping); @@ -293,11 +289,11 @@ void isci_host_deinit(struct isci_host *ihost) set_bit(IHOST_STOP_PENDING, &ihost->flags); spin_lock_irq(&ihost->scic_lock); - scic_controller_stop(scic, SCIC_CONTROLLER_STOP_TIMEOUT); + scic_controller_stop(&ihost->sci, SCIC_CONTROLLER_STOP_TIMEOUT); spin_unlock_irq(&ihost->scic_lock); wait_for_stop(ihost); - scic_controller_reset(scic); + scic_controller_reset(&ihost->sci); isci_timer_list_destroy(ihost); } @@ -347,25 +343,12 @@ int isci_host_init(struct isci_host *isci_host) { int err = 0, i; enum sci_status status; - struct scic_sds_controller *controller; union scic_oem_parameters oem; union scic_user_parameters scic_user_params; struct isci_pci_info *pci_info = to_pci_info(isci_host->pdev); isci_timer_list_construct(isci_host); - controller = scic_controller_alloc(&isci_host->pdev->dev); - - if (!controller) { - dev_err(&isci_host->pdev->dev, - "%s: failed (%d)\n", - __func__, - err); - return -ENOMEM; - } - - isci_host->core_controller = controller; - controller->ihost = isci_host; spin_lock_init(&isci_host->state_lock); spin_lock_init(&isci_host->scic_lock); spin_lock_init(&isci_host->queue_lock); @@ -374,7 +357,7 @@ int isci_host_init(struct isci_host *isci_host) isci_host_change_state(isci_host, isci_starting); isci_host->can_queue = ISCI_CAN_QUEUE_VAL; - status = scic_controller_construct(controller, scu_base(isci_host), + status = scic_controller_construct(&isci_host->sci, scu_base(isci_host), smu_base(isci_host)); if (status != SCI_SUCCESS) { @@ -393,7 +376,7 @@ int isci_host_init(struct isci_host *isci_host) * parameters */ isci_user_parameters_get(isci_host, &scic_user_params); - status = scic_user_parameters_set(isci_host->core_controller, + status = scic_user_parameters_set(&isci_host->sci, &scic_user_params); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -402,7 +385,7 @@ int isci_host_init(struct isci_host *isci_host) return -ENODEV; } - scic_oem_parameters_get(controller, &oem); + scic_oem_parameters_get(&isci_host->sci, &oem); /* grab any OEM parameters specified in orom */ if (pci_info->orom) { @@ -416,7 +399,7 @@ int isci_host_init(struct isci_host *isci_host) } } - status = scic_oem_parameters_set(isci_host->core_controller, &oem); + status = scic_oem_parameters_set(&isci_host->sci, &oem); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, "%s: scic_oem_parameters_set failed\n", @@ -431,7 +414,7 @@ int isci_host_init(struct isci_host *isci_host) INIT_LIST_HEAD(&isci_host->requests_to_errorback); spin_lock_irq(&isci_host->scic_lock); - status = scic_controller_initialize(isci_host->core_controller); + status = scic_controller_initialize(&isci_host->sci); spin_unlock_irq(&isci_host->scic_lock); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -441,7 +424,7 @@ int isci_host_init(struct isci_host *isci_host) return -ENODEV; } - err = scic_controller_mem_init(isci_host->core_controller); + err = scic_controller_mem_init(&isci_host->sci); if (err) return err; diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 8dc8d1c..00e4854 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -58,7 +58,7 @@ #define _SCI_HOST_H_ #include "phy.h" -/*#include "task.h"*/ +#include "scic_sds_controller.h" #include "timers.h" #include "remote_device.h" @@ -75,7 +75,7 @@ #define SCIC_CONTROLLER_STOP_TIMEOUT 5000 struct isci_host { - struct scic_sds_controller *core_controller; + struct scic_sds_controller sci; union scic_oem_parameters oem_parameters; int id; /* unique within a given pci device */ @@ -219,6 +219,14 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev) return dev->port->ha->lldd_ha; } +static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic) +{ + /* XXX delete after merging scic_sds_contoller and isci_host */ + struct isci_host *ihost = container_of(scic, typeof(*ihost), sci); + + return ihost; +} + /** * isci_host_scan_finished() - * diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 6c2d686..a5d5c0b 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -268,7 +268,7 @@ static void isci_unregister(struct isci_host *isci_host) static int __devinit isci_pci_init(struct pci_dev *pdev) { - int err, bar_num, bar_mask; + int err, bar_num, bar_mask = 0; void __iomem * const *iomap; err = pcim_enable_device(pdev); @@ -556,7 +556,7 @@ static void __devexit isci_pci_remove(struct pci_dev *pdev) for_each_isci_host(i, isci_host, pdev) { isci_unregister(isci_host); isci_host_deinit(isci_host); - scic_controller_disable_interrupts(isci_host->core_controller); + scic_controller_disable_interrupts(&isci_host->sci); } } diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index a690b6b..160790a 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -79,7 +79,6 @@ void isci_phy_init( struct isci_host *isci_host, int index) { - struct scic_sds_controller *scic = isci_host->core_controller; struct scic_sds_phy *scic_phy; union scic_oem_parameters oem; enum sci_status status = SCI_SUCCESS; @@ -87,7 +86,7 @@ void isci_phy_init( /*--------------- SCU_Phy Initialization Stuff -----------------------*/ - status = scic_controller_get_phy_handle(scic, index, &scic_phy); + status = scic_controller_get_phy_handle(&isci_host->sci, index, &scic_phy); if (status == SCI_SUCCESS) { phy->sci_phy_handle = scic_phy; scic_phy->iphy = phy; @@ -95,7 +94,7 @@ void isci_phy_init( dev_err(&isci_host->pdev->dev, "failed scic_controller_get_phy_handle\n"); - scic_oem_parameters_get(scic, &oem); + scic_oem_parameters_get(&isci_host->sci, &oem); sas_addr = oem.sds1.phys[index].sas_address.high; sas_addr <<= 32; sas_addr |= oem.sds1.phys[index].sas_address.low; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index d4c4975..21f6050 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -85,8 +85,6 @@ struct isci_phy { #define to_isci_phy(p) \ container_of(p, struct isci_phy, sas_phy); -struct isci_host; - void isci_phy_init( struct isci_phy *phy, struct isci_host *isci_host, diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 2decafb..8d96a10 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -90,7 +90,6 @@ void isci_port_init( int index) { struct scic_sds_port *scic_port; - struct scic_sds_controller *controller = isci_host->core_controller; INIT_LIST_HEAD(&isci_port->remote_dev_list); INIT_LIST_HEAD(&isci_port->domain_dev_list); @@ -99,7 +98,7 @@ void isci_port_init( isci_port->isci_host = isci_host; isci_port_change_state(isci_port, isci_freed); - (void)scic_controller_get_port_handle(controller, index, &scic_port); + (void)scic_controller_get_port_handle(&isci_host->sci, index, &scic_port); isci_port->sci_port_handle = scic_port; scic_port->iport = isci_port; } @@ -415,33 +414,9 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor return ret; } -/** - * isci_port_invalid_link_up() - This function informs the SCI Core user that - * a phy/link became ready, but the phy is not allowed in the port. In some - * situations the underlying hardware only allows for certain phy to port - * mappings. If these mappings are violated, then this API is invoked. - * @controller: This parameter represents the controller which contains the - * port. - * @port: This parameter specifies the SCI port object for which the callback - * is being invoked. - * @phy: This parameter specifies the phy that came ready, but the phy can't be - * a valid member of the port. - * - */ -void isci_port_invalid_link_up(struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, - struct scic_sds_phy *phy) -{ - struct isci_host *ihost = scic->ihost; - - dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); -} - void isci_port_stop_complete(struct scic_sds_controller *scic, struct scic_sds_port *sci_port, enum sci_status completion_status) { - struct isci_host *ihost = scic->ihost; - - dev_dbg(&ihost->pdev->dev, "Port stop complete\n"); + dev_dbg(&scic_to_ihost(scic)->pdev->dev, "Port stop complete\n"); } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index eeac7bb..ac1ac86 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -147,11 +147,6 @@ void isci_port_hard_reset_complete( int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); -void isci_port_invalid_link_up( - struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, - struct scic_sds_phy *phy); - void isci_port_stop_complete( struct scic_sds_controller *scic, struct scic_sds_port *sci_port, diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index ee6fe1d..734d028 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -815,7 +815,7 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl * As a result, avoid sending the ready notification. */ if (sci_dev->state_machine.previous_state_id != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) - isci_remote_device_ready(scic->ihost, idev); + isci_remote_device_ready(scic_to_ihost(scic), idev); } static void scic_sds_remote_device_initial_state_enter(void *object) @@ -918,21 +918,16 @@ static void isci_remote_device_stop_complete(struct isci_host *ihost, static void scic_sds_remote_device_stopped_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; - struct scic_sds_controller *scic; - struct isci_remote_device *idev; - struct isci_host *ihost; + struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); u32 prev_state; - scic = scic_sds_remote_device_get_controller(sci_dev); - ihost = scic->ihost; - idev = sci_dev_to_idev(sci_dev); - /* If we are entering from the stopping state let the SCI User know that * the stop operation has completed. */ prev_state = sci_dev->state_machine.previous_state_id; if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) - isci_remote_device_stop_complete(ihost, idev); + isci_remote_device_stop_complete(scic_to_ihost(scic), idev); scic_sds_controller_remote_device_stopped(scic, sci_dev); } @@ -941,7 +936,7 @@ static void scic_sds_remote_device_starting_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = scic->ihost; + struct isci_host *ihost = scic_to_ihost(scic); struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); isci_remote_device_not_ready(ihost, idev, @@ -952,7 +947,8 @@ static void scic_sds_remote_device_ready_state_enter(void *object) { struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); + struct domain_device *dev = idev->domain_dev; scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; @@ -963,7 +959,7 @@ static void scic_sds_remote_device_ready_state_enter(void *object) sci_base_state_machine_change_state(&sci_dev->state_machine, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); } else - isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev)); + isci_remote_device_ready(scic_to_ihost(scic), idev); } static void scic_sds_remote_device_ready_state_exit(void *object) @@ -975,7 +971,7 @@ static void scic_sds_remote_device_ready_state_exit(void *object) struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - isci_remote_device_not_ready(scic->ihost, idev, + isci_remote_device_not_ready(scic_to_ihost(scic), idev, SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); } } @@ -1019,7 +1015,7 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) BUG_ON(sci_dev->working_request == NULL); - isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev), + isci_remote_device_not_ready(scic_to_ihost(scic), sci_dev_to_idev(sci_dev), SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } @@ -1030,7 +1026,7 @@ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(void *obje struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); if (sci_dev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) - isci_remote_device_not_ready(scic->ihost, idev, + isci_remote_device_not_ready(scic_to_ihost(scic), idev, sci_dev->not_ready_reason); } @@ -1039,7 +1035,7 @@ static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) struct scic_sds_remote_device *sci_dev = object; struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev)); + isci_remote_device_ready(scic_to_ihost(scic), sci_dev_to_idev(sci_dev)); } static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) @@ -1049,7 +1045,7 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) BUG_ON(sci_dev->working_request == NULL); - isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev), + isci_remote_device_not_ready(scic_to_ihost(scic), sci_dev_to_idev(sci_dev), SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 36adc15..0521c04 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -201,7 +201,7 @@ static enum sci_status isci_io_request_build( * we will let the core allocate the IO tag. */ status = scic_io_request_construct( - isci_host->core_controller, + &isci_host->sci, sci_device, SCI_CONTROLLER_INVALID_IO_TAG, request, @@ -394,7 +394,7 @@ int isci_request_execute( /* send the request, let the core assign the IO TAG. */ status = scic_controller_start_io( - isci_host->core_controller, + &isci_host->sci, sci_device, request->sci_request_handle, SCI_CONTROLLER_INVALID_IO_TAG @@ -1186,7 +1186,7 @@ void isci_request_io_request_complete( ); /* complete the io request to the core. */ - scic_controller_complete_io(isci_host->core_controller, + scic_controller_complete_io(&isci_host->sci, &isci_device->sci, request->sci_request_handle); /* NULL the request handle so it cannot be completed or diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index 41636c3..8394f60 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -62,9 +62,7 @@ static inline struct device *scic_to_dev(struct scic_sds_controller *scic) { - struct isci_host *isci_host = scic->ihost; - - return &isci_host->pdev->dev; + return &scic_to_ihost(scic)->pdev->dev; } static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 3a3f546..cabad0b 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -299,7 +299,7 @@ static enum sci_status isci_task_request_build( /* let the core do it's construct. */ status = scic_task_request_construct( - isci_host->core_controller, + &isci_host->sci, sci_device, SCI_CONTROLLER_INVALID_IO_TAG, request, @@ -378,7 +378,7 @@ static void isci_tmf_timeout_cb(void *tmf_request_arg) /* Terminate the TMF transmit request. */ status = scic_controller_terminate_request( - request->isci_host->core_controller, + &request->isci_host->sci, &request->isci_device->sci, request->sci_request_handle ); @@ -469,7 +469,7 @@ int isci_task_execute_tmf( /* start the TMF io. */ status = scic_controller_start_task( - isci_host->core_controller, + &isci_host->sci, sci_device, request->sci_request_handle, SCI_CONTROLLER_INVALID_IO_TAG @@ -772,7 +772,7 @@ static void isci_terminate_request_core( was_terminated = true; needs_cleanup_handling = true; status = scic_controller_terminate_request( - isci_host->core_controller, + &isci_host->sci, &isci_device->sci, isci_request->sci_request_handle); } @@ -1466,12 +1466,9 @@ isci_task_request_complete(struct isci_host *ihost, /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; - scic_controller_complete_io(ihost->core_controller, - &idev->sci, + scic_controller_complete_io(&ihost->sci, &idev->sci, ireq->sci_request_handle); - - /* - * NULL the request handle to make sure it cannot be terminated + /* NULL the request handle to make sure it cannot be terminated * or completed again. */ ireq->sci_request_handle = NULL; diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index aa24586..ecc5f13 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -52,14 +52,12 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - -#if !defined(_ISCI_TASK_H_) +#ifndef _ISCI_TASK_H_ #define _ISCI_TASK_H_ #include struct isci_request; -struct isci_host; /** * enum isci_tmf_cb_state - This enum defines the possible states in which the -- cgit v0.10.2 From 9286a1959ce7f3df3c1a8e33eb9b210078318dc8 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 6 May 2011 02:17:37 +0000 Subject: isci: Removing unnecessary functions in request.c No need for wrappers, just access sas_task directly. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 6286dec..52692a16 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -666,19 +666,20 @@ u32 scic_io_request_get_object_size(void) enum sci_status scic_io_request_construct_basic_ssp( struct scic_sds_request *sci_req) { - struct isci_request *isci_request = sci_req->ireq; + struct isci_request *ireq = sci_req->ireq; + struct sas_task *task = isci_request_access_task(ireq); sci_req->protocol = SCIC_SSP_PROTOCOL; - scu_ssp_io_request_construct_task_context( - sci_req, - isci_request_io_request_get_data_direction(isci_request), - isci_request_io_request_get_transfer_length(isci_request)); + scu_ssp_io_request_construct_task_context(sci_req, + task->data_dir, + task->total_xfer_len); scic_sds_io_request_build_ssp_command_iu(sci_req); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return SCI_SUCCESS; } @@ -705,8 +706,6 @@ enum sci_status scic_io_request_construct_basic_sata( { enum sci_status status; struct scic_sds_stp_request *stp_req; - u32 len; - enum dma_data_direction dir; bool copy = false; struct isci_request *isci_request = sci_req->ireq; struct sas_task *task = isci_request_access_task(isci_request); @@ -715,11 +714,12 @@ enum sci_status scic_io_request_construct_basic_sata( sci_req->protocol = SCIC_STP_PROTOCOL; - len = isci_request_io_request_get_transfer_length(isci_request); - dir = isci_request_io_request_get_data_direction(isci_request); copy = (task->data_dir == DMA_NONE) ? false : true; - status = scic_io_request_construct_sata(sci_req, len, dir, copy); + status = scic_io_request_construct_sata(sci_req, + task->total_xfer_len, + task->data_dir, + copy); if (status == SCI_SUCCESS) sci_base_state_machine_change_state(&sci_req->state_machine, diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 0521c04..e01c2c9 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -1197,37 +1197,3 @@ void isci_request_io_request_complete( isci_host_can_dequeue(isci_host, 1); } - -/** - * isci_request_io_request_get_transfer_length() - This function is called by - * the sci core to retrieve the transfer length for a given request. - * @request: This parameter is the isci_request object. - * - * length of transfer for specified request. - */ -u32 isci_request_io_request_get_transfer_length(struct isci_request *request) -{ - struct sas_task *task = isci_request_access_task(request); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: total_xfer_len: %d\n", - __func__, - task->total_xfer_len); - return task->total_xfer_len; -} - - -/** - * isci_request_io_request_get_data_direction() - This function is called by - * the sci core to retrieve the data direction for a given request. - * @request: This parameter is the isci_request object. - * - * data direction for specified request. - */ -enum dma_data_direction isci_request_io_request_get_data_direction( - struct isci_request *request) -{ - struct sas_task *task = isci_request_access_task(request); - - return task->data_dir; -} diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 642b211..9c97715 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -343,11 +343,6 @@ void isci_request_io_request_complete( struct isci_request *request, enum sci_io_status completion_status); -u32 isci_request_io_request_get_transfer_length( - struct isci_request *request); - -enum dma_data_direction isci_request_io_request_get_data_direction(struct isci_request *req); - /** * isci_request_io_request_get_next_sge() - This function is called by the sci * core to retrieve the next sge for a given request. @@ -391,26 +386,6 @@ static inline void *isci_request_io_request_get_next_sge( } - -void *isci_request_ssp_io_request_get_cdb_address( - struct isci_request *request); - -u32 isci_request_ssp_io_request_get_cdb_length( - struct isci_request *request); - -u32 isci_request_ssp_io_request_get_lun( - struct isci_request *request); - -u32 isci_request_ssp_io_request_get_task_attribute( - struct isci_request *request); - -u32 isci_request_ssp_io_request_get_command_priority( - struct isci_request *request); - - - - - void isci_terminate_pending_requests( struct isci_host *isci_host, struct isci_remote_device *isci_device, -- cgit v0.10.2 From ed30c275dd9fc5c603081144db5df3110f258534 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 5 May 2011 01:11:43 +0000 Subject: isci: kill scic_controller_get_port_handle function This function is just overkill and its usage is inconsistent. Replace with inlined code. Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h index 23c7b5c..50ba155 100644 --- a/drivers/scsi/isci/core/scic_controller.h +++ b/drivers/scsi/isci/core/scic_controller.h @@ -120,11 +120,6 @@ enum sci_status scic_controller_complete_io( struct scic_sds_remote_device *remote_device, struct scic_sds_request *io_request); -enum sci_status scic_controller_get_port_handle( - struct scic_sds_controller *controller, - u8 port_index, - struct scic_sds_port **port_handle); - enum sci_status scic_controller_get_phy_handle( struct scic_sds_controller *controller, u8 phy_index, diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index ea51041..b595482 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -2155,36 +2155,6 @@ enum sci_task_status scic_controller_start_task( } /** - * scic_controller_get_port_handle() - This method simply provides the user - * with a unique handle for a given SAS/SATA core port index. - * @controller: This parameter represents the handle to the controller object - * from which to retrieve a port (SAS or SATA) handle. - * @port_index: This parameter specifies the port index in the controller for - * which to retrieve the port handle. 0 <= port_index < maximum number of - * phys. - * @port_handle: This parameter specifies the retrieved port handle to be - * provided to the caller. - * - * Indicate if the retrieval of the port handle was successful. SCI_SUCCESS - * This value is returned if the retrieval was successful. - * SCI_FAILURE_INVALID_PORT This value is returned if the supplied port id is - * not in the supported range. - */ -enum sci_status scic_controller_get_port_handle( - struct scic_sds_controller *scic, - u8 port_index, - struct scic_sds_port **port_handle) -{ - if (port_index < scic->logical_port_entries) { - *port_handle = &scic->port_table[port_index]; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_PORT; -} - -/** * scic_controller_get_phy_handle() - This method simply provides the user with * a unique handle for a given SAS/SATA phy index/identifier. * @controller: This parameter represents the handle to the controller object diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 6b1f4a0..6b2fb44 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -123,11 +123,10 @@ static s32 sci_sas_address_compare( * NULL if there is no matching port for the phy. */ static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( - struct scic_sds_controller *controller, + struct scic_sds_controller *scic, struct scic_sds_phy *phy) { - u8 port_index; - struct scic_sds_port *port_handle; + u8 i; struct sci_sas_address port_sas_address; struct sci_sas_address port_attached_device_address; struct sci_sas_address phy_sas_address; @@ -136,24 +135,20 @@ static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( /* * Since this phy can be a member of a wide port check to see if one or * more phys match the sent and received SAS address as this phy in which - * case it should participate in the same port. */ + * case it should participate in the same port. + */ scic_sds_phy_get_sas_address(phy, &phy_sas_address); scic_sds_phy_get_attached_sas_address(phy, &phy_attached_device_address); - for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { - if (scic_controller_get_port_handle(controller, port_index, &port_handle) == SCI_SUCCESS) { - struct scic_sds_port *port = (struct scic_sds_port *)port_handle; + for (i = 0; i < scic->logical_port_entries; i++) { + struct scic_sds_port *port = &scic->port_table[i]; - scic_sds_port_get_sas_address(port, &port_sas_address); - scic_sds_port_get_attached_sas_address(port, &port_attached_device_address); + scic_sds_port_get_sas_address(port, &port_sas_address); + scic_sds_port_get_attached_sas_address(port, &port_attached_device_address); - if ( - (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0) - && (sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) - ) { - return port; - } - } + if ((sci_sas_address_compare(port_sas_address, phy_sas_address) == 0) && + (sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0)) + return port; } return NULL; @@ -568,7 +563,6 @@ static void scic_sds_apc_agent_configure_ports( u8 port_index; enum sci_status status; struct scic_sds_port *port; - struct scic_sds_port *port_handle; enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; port = scic_sds_port_configuration_agent_find_port(controller, phy); @@ -590,9 +584,8 @@ static void scic_sds_apc_agent_configure_ports( port_index <= port_agent->phy_valid_port_range[phy->phy_index].max_index; port_index++ ) { - scic_controller_get_port_handle(controller, port_index, &port_handle); - port = (struct scic_sds_port *)port_handle; + port = &controller->port_table[port_index]; /* First we must make sure that this PHY can be added to this Port. */ if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) { diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 8d96a10..6110306 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -76,31 +76,20 @@ static void isci_port_change_state( -/** - * isci_port_init() - This function initializes the given isci_port object. - * @isci_port: This parameter specifies the port object to be initialized. - * @isci_host: This parameter specifies parent controller object for the port. - * @index: This parameter specifies which SCU port the isci_port associates - * with. Generally, SCU port 0 relates to isci_port 0, etc. - * - */ -void isci_port_init( - struct isci_port *isci_port, - struct isci_host *isci_host, - int index) +void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) { - struct scic_sds_port *scic_port; - - INIT_LIST_HEAD(&isci_port->remote_dev_list); - INIT_LIST_HEAD(&isci_port->domain_dev_list); - spin_lock_init(&isci_port->state_lock); - init_completion(&isci_port->start_complete); - isci_port->isci_host = isci_host; - isci_port_change_state(isci_port, isci_freed); - - (void)scic_controller_get_port_handle(&isci_host->sci, index, &scic_port); - isci_port->sci_port_handle = scic_port; - scic_port->iport = isci_port; + struct scic_sds_port *sci_port; + + INIT_LIST_HEAD(&iport->remote_dev_list); + INIT_LIST_HEAD(&iport->domain_dev_list); + spin_lock_init(&iport->state_lock); + init_completion(&iport->start_complete); + iport->isci_host = ihost; + isci_port_change_state(iport, isci_freed); + + sci_port = &ihost->sci.port_table[index]; + iport->sci_port_handle = sci_port; + sci_port->iport = iport; } -- cgit v0.10.2 From b9988b8e7fcd80404c60462dc223df8c1f31550d Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 5 May 2011 01:11:49 +0000 Subject: isci: remove scic_sds_port_increment_request_count Removes excessive encapsulation function. Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 04a56c5..e1c8734 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -1232,8 +1232,7 @@ static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler struct scic_sds_remote_device *device, struct scic_sds_request *io_request) { - scic_sds_port_increment_request_count(port); - + port->started_request_count++; return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 115cbe3..213d423 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -359,11 +359,6 @@ struct scic_sds_port_state_handler { ((this_port)->physical_port_index) -static inline void scic_sds_port_increment_request_count(struct scic_sds_port *sci_port) -{ - sci_port->started_request_count++; -} - static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port) { if (WARN_ONCE(sci_port->started_request_count == 0, -- cgit v0.10.2 From a98a7426bc91700ac8613701daf8470efe2ad2d2 Mon Sep 17 00:00:00 2001 From: Jacek Danecki Date: Tue, 3 May 2011 04:21:07 +0000 Subject: isci: rnc state machine table c99 conversion This makes the subsequent patches to delete rnc->state_handler more clear. Signed-off-by: Jacek Danecki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 49d2dc5..5e85a18 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -788,80 +788,70 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_event /* --------------------------------------------------------------------------- */ static struct scic_sds_remote_node_context_handlers -scic_sds_remote_node_context_state_handler_table[ - SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES] = -{ - /* SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE */ - { - scic_sds_remote_node_context_default_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_initial_state_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_default_start_task_handler, - scic_sds_remote_node_context_default_event_handler +scic_sds_remote_node_context_state_handler_table[] = { + [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { + .destruct_handler = scic_sds_remote_node_context_default_destruct_handler, + .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, + .resume_handler = scic_sds_remote_node_context_initial_state_resume_handler, + .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, + .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, + .event_handler = scic_sds_remote_node_context_default_event_handler }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_continue_to_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_default_start_task_handler, - scic_sds_remote_node_context_posting_state_event_handler + [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { + .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, + .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, + .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, + .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, + .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, + .event_handler = scic_sds_remote_node_context_posting_state_event_handler }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE */ - { - scic_sds_remote_node_context_invalidating_state_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_continue_to_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_default_start_task_handler, - scic_sds_remote_node_context_invalidating_state_event_handler + [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { + .destruct_handler = scic_sds_remote_node_context_invalidating_state_destruct_handler, + .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, + .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, + .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, + .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, + .event_handler = scic_sds_remote_node_context_invalidating_state_event_handler }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_continue_to_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_success_start_task_handler, - scic_sds_remote_node_context_resuming_state_event_handler + [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { + .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, + .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, + .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, + .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, + .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, + .event_handler = scic_sds_remote_node_context_resuming_state_event_handler }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_ready_state_suspend_handler, - scic_sds_remote_node_context_default_resume_handler, - scic_sds_remote_node_context_ready_state_start_io_handler, - scic_sds_remote_node_context_success_start_task_handler, - scic_sds_remote_node_context_ready_state_event_handler + [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { + .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, + .suspend_handler = scic_sds_remote_node_context_ready_state_suspend_handler, + .resume_handler = scic_sds_remote_node_context_default_resume_handler, + .start_io_handler = scic_sds_remote_node_context_ready_state_start_io_handler, + .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, + .event_handler = scic_sds_remote_node_context_ready_state_event_handler }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_tx_suspended_state_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_suspended_start_task_handler, - scic_sds_remote_node_context_default_event_handler + [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { + .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, + .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, + .resume_handler = scic_sds_remote_node_context_tx_suspended_state_resume_handler, + .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, + .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, + .event_handler = scic_sds_remote_node_context_default_event_handler }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_suspended_start_task_handler, - scic_sds_remote_node_context_default_event_handler + [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { + .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, + .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, + .resume_handler = scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler, + .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, + .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, + .event_handler = scic_sds_remote_node_context_default_event_handler }, - /* SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE */ - { - scic_sds_remote_node_context_general_destruct_handler, - scic_sds_remote_node_context_default_suspend_handler, - scic_sds_remote_node_context_await_suspension_state_resume_handler, - scic_sds_remote_node_context_default_start_io_handler, - scic_sds_remote_node_context_await_suspension_state_start_task_handler, - scic_sds_remote_node_context_await_suspension_state_event_handler + [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { + .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, + .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, + .resume_handler = scic_sds_remote_node_context_await_suspension_state_resume_handler, + .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, + .start_task_handler = scic_sds_remote_node_context_await_suspension_state_start_task_handler, + .event_handler = scic_sds_remote_node_context_await_suspension_state_event_handler } }; diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index bc7914b..540a49a 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -201,10 +201,7 @@ enum scis_sds_remote_node_context_states { * there is a request to supend the remote node context or when there is a TC * completion where the remote node will be suspended by the hardware. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE, - - SCIC_SDS_REMOTE_NODE_CONTEXT_MAX_STATES - + SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE }; /** -- cgit v0.10.2 From 4b33981ade7cf723f3f32809e34192376c9a10f8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 May 2011 17:36:38 -0700 Subject: isci: unify phy data structures Make scic_sds_phy a member of isci_phy and merge their lifetimes which means removing the phy table from scic_sds_controller in favor of the one at that isci_host level. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index b595482..4ad3155 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -673,6 +673,7 @@ static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic) */ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) { + struct isci_host *ihost = scic_to_ihost(scic); struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; struct scic_sds_phy *sci_phy; enum sci_status status; @@ -688,7 +689,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro u8 index; for (index = 0; index < SCI_MAX_PHYS; index++) { - sci_phy = &scic->phy_table[index]; + sci_phy = &ihost->phys[index].sci; state = sci_phy->state_machine.current_state_id; if (!scic_sds_phy_get_port(sci_phy)) @@ -719,7 +720,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro scic_sds_controller_phy_timer_stop(scic); } } else { - sci_phy = &scic->phy_table[scic->next_phy_to_start]; + sci_phy = &ihost->phys[scic->next_phy_to_start].sci; if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { if (scic_sds_phy_get_port(sci_phy) == NULL) { @@ -748,7 +749,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro "to stop phy %d because of status " "%d.\n", __func__, - scic->phy_table[scic->next_phy_to_start].phy_index, + ihost->phys[scic->next_phy_to_start].sci.phy_index, status); } @@ -792,23 +793,22 @@ static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller u32 index; enum sci_status status; enum sci_status phy_status; + struct isci_host *ihost = scic_to_ihost(scic); status = SCI_SUCCESS; for (index = 0; index < SCI_MAX_PHYS; index++) { - phy_status = scic_sds_phy_stop(&scic->phy_table[index]); + phy_status = scic_sds_phy_stop(&ihost->phys[index].sci); - if ( - (phy_status != SCI_SUCCESS) - && (phy_status != SCI_FAILURE_INVALID_STATE) - ) { + if (phy_status != SCI_SUCCESS && + phy_status != SCI_FAILURE_INVALID_STATE) { status = SCI_FAILURE; dev_warn(scic_to_dev(scic), "%s: Controller stop operation failed to stop " "phy %d because of status %d.\n", __func__, - scic->phy_table[index].phy_index, phy_status); + ihost->phys[index].sci.phy_index, phy_status); } } @@ -1069,21 +1069,13 @@ static void scic_sds_controller_sdma_completion( } } -/** - * - * @scic: - * @completion_entry: - * - * This method processes an unsolicited frame message. This is called from - * within the controller completion handler. none - */ -static void scic_sds_controller_unsolicited_frame( - struct scic_sds_controller *scic, - u32 completion_entry) +static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic, + u32 completion_entry) { u32 index; u32 frame_index; + struct isci_host *ihost = scic_to_ihost(scic); struct scu_unsolicited_frame_header *frame_header; struct scic_sds_phy *phy; struct scic_sds_remote_device *device; @@ -1092,10 +1084,8 @@ static void scic_sds_controller_unsolicited_frame( frame_index = SCU_GET_FRAME_INDEX(completion_entry); - frame_header - = scic->uf_control.buffers.array[frame_index].header; - scic->uf_control.buffers.array[frame_index].state - = UNSOLICITED_FRAME_IN_USE; + frame_header = scic->uf_control.buffers.array[frame_index].header; + scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; if (SCU_GET_FRAME_ERROR(completion_entry)) { /* @@ -1108,10 +1098,8 @@ static void scic_sds_controller_unsolicited_frame( if (frame_header->is_address_frame) { index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &scic->phy_table[index]; - if (phy != NULL) { - result = scic_sds_phy_frame_handler(phy, frame_index); - } + phy = &ihost->phys[index].sci; + result = scic_sds_phy_frame_handler(phy, frame_index); } else { index = SCU_GET_COMPLETION_INDEX(completion_entry); @@ -1122,7 +1110,7 @@ static void scic_sds_controller_unsolicited_frame( * device that has not yet been created. In either case forwared * the frame to the PE and let it take care of the frame data. */ index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &scic->phy_table[index]; + phy = &ihost->phys[index].sci; result = scic_sds_phy_frame_handler(phy, frame_index); } else { if (index < scic->remote_node_entries) @@ -1144,21 +1132,14 @@ static void scic_sds_controller_unsolicited_frame( } } -/** - * This method processes an event completion entry. This is called from within - * the controller completion handler. - * @scic: - * @completion_entry: - * - */ -static void scic_sds_controller_event_completion( - struct scic_sds_controller *scic, - u32 completion_entry) +static void scic_sds_controller_event_completion(struct scic_sds_controller *scic, + u32 completion_entry) { - u32 index; + struct isci_host *ihost = scic_to_ihost(scic); struct scic_sds_request *io_request; struct scic_sds_remote_device *device; struct scic_sds_phy *phy; + u32 index; index = SCU_GET_COMPLETION_INDEX(completion_entry); @@ -1237,7 +1218,7 @@ static void scic_sds_controller_event_completion( * we get the event notification. This is a type 4 event. */ case SCU_EVENT_TYPE_OSSP_EVENT: index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &scic->phy_table[index]; + phy = &ihost->phys[index].sci; scic_sds_phy_event_handler(phy, completion_entry); break; @@ -2155,38 +2136,6 @@ enum sci_task_status scic_controller_start_task( } /** - * scic_controller_get_phy_handle() - This method simply provides the user with - * a unique handle for a given SAS/SATA phy index/identifier. - * @controller: This parameter represents the handle to the controller object - * from which to retrieve a phy (SAS or SATA) handle. - * @phy_index: This parameter specifies the phy index in the controller for - * which to retrieve the phy handle. 0 <= phy_index < maximum number of phys. - * @phy_handle: This parameter specifies the retrieved phy handle to be - * provided to the caller. - * - * Indicate if the retrieval of the phy handle was successful. SCI_SUCCESS This - * value is returned if the retrieval was successful. SCI_FAILURE_INVALID_PHY - * This value is returned if the supplied phy id is not in the supported range. - */ -enum sci_status scic_controller_get_phy_handle( - struct scic_sds_controller *scic, - u8 phy_index, - struct scic_sds_phy **phy_handle) -{ - if (phy_index < ARRAY_SIZE(scic->phy_table)) { - *phy_handle = &scic->phy_table[phy_index]; - - return SCI_SUCCESS; - } - - dev_err(scic_to_dev(scic), - "%s: Controller:0x%p PhyId:0x%x invalid phy index\n", - __func__, scic, phy_index); - - return SCI_FAILURE_INVALID_PHY; -} - -/** * scic_controller_allocate_io_tag() - This method will allocate a tag from the * pool of free IO tags. Direct allocation of IO tags by the SCI Core user * is optional. The scic_controller_start_io() method will allocate an IO @@ -2724,7 +2673,7 @@ enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS); index++) { result = scic_sds_phy_initialize( - &scic->phy_table[index], + &ihost->phys[index].sci, &scic->scu_registers->peg0.pe[index].tl, &scic->scu_registers->peg0.pe[index].ll); } @@ -2979,6 +2928,7 @@ enum sci_status scic_controller_construct(struct scic_sds_controller *scic, void __iomem *scu_base, void __iomem *smu_base) { + struct isci_host *ihost = scic_to_ihost(scic); u8 i; sci_base_state_machine_construct(&scic->state_machine, @@ -3000,7 +2950,7 @@ enum sci_status scic_controller_construct(struct scic_sds_controller *scic, /* Construct the phys for this controller */ for (i = 0; i < SCI_MAX_PHYS; i++) { /* Add all the PHYs to the dummy port */ - scic_sds_phy_construct(&scic->phy_table[i], + scic_sds_phy_construct(&ihost->phys[i].sci, &scic->port_table[SCI_MAX_PORTS], i); } diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 0a9bb8b..aaaf15a 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -168,12 +168,6 @@ struct scic_sds_controller { struct scic_sds_port port_table[SCI_MAX_PORTS + 1]; /** - * This field is the array of phy objects that are controlled by this - * controller object. - */ - struct scic_sds_phy phy_table[SCI_MAX_PHYS]; - - /** * This field is the array of device objects that are currently constructed * for this controller object. This table is used as a fast lookup of device * objects that need to handle device completion notifications from the diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 8f1e3db..f0f4c74 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -436,7 +436,7 @@ void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, struct sci_sas_address *sas_address) { struct sas_identify_frame *iaf; - struct isci_phy *iphy = sci_phy->iphy; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); iaf = &iphy->frame_rcvd.iaf; memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); @@ -1099,7 +1099,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler enum sci_status result; u32 *frame_words; struct sas_identify_frame iaf; - struct isci_phy *iphy = sci_phy->iphy; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_phy_get_controller(sci_phy)->uf_control), @@ -1164,7 +1164,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle enum sci_status result; struct dev_to_host_fis *frame_header; u32 *fis_frame_data; - struct isci_phy *iphy = sci_phy->iphy; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); result = scic_sds_unsolicited_frame_control_get_header( &(scic_sds_phy_get_controller(sci_phy)->uf_control), diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index b6a0ed1..c40c09b 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -217,7 +217,6 @@ enum scic_sds_phy_protocol { SCIC_SDS_MAX_PHY_PROTOCOLS }; -struct isci_phy; /** * struct scic_sds_phy - This structure contains or references all of the data * necessary to represent the core phy object and SCU harware protocol @@ -227,11 +226,6 @@ struct isci_phy; */ struct scic_sds_phy { /** - * This field depicts the peer object for the phy. - */ - struct isci_phy *iphy; - - /** * This field contains the information for the base phy state machine. */ struct sci_base_state_machine state_machine; diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index e1c8734..84b8abb 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -645,7 +645,7 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_port *iport = sci_port->iport; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_phy *iphy = sci_phy->iphy; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 6b2fb44..aa7ac95 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -170,32 +170,27 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( struct scic_sds_controller *controller, struct scic_sds_port_configuration_agent *port_agent) { + struct isci_host *ihost = scic_to_ihost(controller); struct sci_sas_address first_address; struct sci_sas_address second_address; /* * Sanity check the max ranges for all the phys the max index * is always equal to the port range index */ - if ( - (port_agent->phy_valid_port_range[0].max_index != 0) - || (port_agent->phy_valid_port_range[1].max_index != 1) - || (port_agent->phy_valid_port_range[2].max_index != 2) - || (port_agent->phy_valid_port_range[3].max_index != 3) - ) { + if (port_agent->phy_valid_port_range[0].max_index != 0 || + port_agent->phy_valid_port_range[1].max_index != 1 || + port_agent->phy_valid_port_range[2].max_index != 2 || + port_agent->phy_valid_port_range[3].max_index != 3) return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } /* * This is a request to configure a single x4 port or at least attempt * to make all the phys into a single port */ - if ( - (port_agent->phy_valid_port_range[0].min_index == 0) - && (port_agent->phy_valid_port_range[1].min_index == 0) - && (port_agent->phy_valid_port_range[2].min_index == 0) - && (port_agent->phy_valid_port_range[3].min_index == 0) - ) { + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 0 && + port_agent->phy_valid_port_range[2].min_index == 0 && + port_agent->phy_valid_port_range[3].min_index == 0) return SCI_SUCCESS; - } /* * This is a degenerate case where phy 1 and phy 2 are assigned @@ -210,8 +205,8 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * PE0 and PE3 can never have the same SAS Address unless they * are part of the same x4 wide port and we have already checked * for this condition. */ - scic_sds_phy_get_sas_address(&controller->phy_table[0], &first_address); - scic_sds_phy_get_sas_address(&controller->phy_table[3], &second_address); + scic_sds_phy_get_sas_address(&ihost->phys[0].sci, &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[3].sci, &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -221,12 +216,10 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * PE0 and PE1 are configured into a 2x1 ports make sure that the * SAS Address for PE0 and PE2 are different since they can not be * part of the same port. */ - if ( - (port_agent->phy_valid_port_range[0].min_index == 0) - && (port_agent->phy_valid_port_range[1].min_index == 1) - ) { - scic_sds_phy_get_sas_address(&controller->phy_table[0], &first_address); - scic_sds_phy_get_sas_address(&controller->phy_table[2], &second_address); + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 1) { + scic_sds_phy_get_sas_address(&ihost->phys[0].sci, &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[2].sci, &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -237,12 +230,10 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * PE2 and PE3 are configured into a 2x1 ports make sure that the * SAS Address for PE1 and PE3 are different since they can not be * part of the same port. */ - if ( - (port_agent->phy_valid_port_range[2].min_index == 2) - && (port_agent->phy_valid_port_range[3].min_index == 3) - ) { - scic_sds_phy_get_sas_address(&controller->phy_table[1], &first_address); - scic_sds_phy_get_sas_address(&controller->phy_table[3], &second_address); + if (port_agent->phy_valid_port_range[2].min_index == 2 && + port_agent->phy_valid_port_range[3].min_index == 3) { + scic_sds_phy_get_sas_address(&ihost->phys[1].sci, &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[3].sci, &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -267,6 +258,7 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( struct scic_sds_controller *controller, struct scic_sds_port_configuration_agent *port_agent) { + struct isci_host *ihost = scic_to_ihost(controller); u32 phy_mask; u32 assigned_phy_mask; struct sci_sas_address sas_address; @@ -281,68 +273,64 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { phy_mask = controller->oem_parameters.sds1.ports[port_index].phy_mask; - if (phy_mask != 0) { - /* - * Make sure that one or more of the phys were not already assinged to - * a different port. */ - if ((phy_mask & ~assigned_phy_mask) == 0) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } + if (!phy_mask) + continue; + /* + * Make sure that one or more of the phys were not already assinged to + * a different port. */ + if ((phy_mask & ~assigned_phy_mask) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } - /* Find the starting phy index for this round through the loop */ - for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { - if ((1 << phy_index) & phy_mask) { - scic_sds_phy_get_sas_address( - &controller->phy_table[phy_index], &sas_address - ); + /* Find the starting phy index for this round through the loop */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + &sas_address); - /* - * The phy_index can be used as the starting point for the - * port range since the hardware starts all logical ports - * the same as the PE index. */ - port_agent->phy_valid_port_range[phy_index].min_index = port_index; - port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - - if (phy_index != port_index) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } + /* + * The phy_index can be used as the starting point for the + * port range since the hardware starts all logical ports + * the same as the PE index. */ + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - break; - } + if (phy_index != port_index) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; } - /* - * See how many additional phys are being added to this logical port. - * Note: We have not moved the current phy_index so we will actually - * compare the startting phy with itself. - * This is expected and required to add the phy to the port. */ - while (phy_index < SCI_MAX_PHYS) { - if ((1 << phy_index) & phy_mask) { - scic_sds_phy_get_sas_address( - &controller->phy_table[phy_index], &phy_assigned_address - ); - - if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { - /* - * The phy mask specified that this phy is part of the same port - * as the starting phy and it is not so fail this configuration */ - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } + break; + } - port_agent->phy_valid_port_range[phy_index].min_index = port_index; - port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + /* + * See how many additional phys are being added to this logical port. + * Note: We have not moved the current phy_index so we will actually + * compare the startting phy with itself. + * This is expected and required to add the phy to the port. */ + while (phy_index < SCI_MAX_PHYS) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + &phy_assigned_address); + + if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { + /* + * The phy mask specified that this phy is part of the same port + * as the starting phy and it is not so fail this configuration */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } - scic_sds_port_add_phy( - &controller->port_table[port_index], - &controller->phy_table[phy_index] - ); + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - assigned_phy_mask |= (1 << phy_index); - } + scic_sds_port_add_phy(&controller->port_table[port_index], + &ihost->phys[phy_index].sci); - phy_index++; - } + assigned_phy_mask |= (1 << phy_index); } + + phy_index++; } return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); @@ -355,12 +343,12 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( * device objects before a new series of link up notifications because a link * down has allowed a better port configuration. */ -static void scic_sds_mpc_agent_timeout_handler( - void *object) +static void scic_sds_mpc_agent_timeout_handler(void *object) { u8 index; - struct scic_sds_controller *controller = (struct scic_sds_controller *)object; - struct scic_sds_port_configuration_agent *port_agent = &controller->port_agent; + struct scic_sds_controller *scic = object; + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_port_configuration_agent *port_agent = &scic->port_agent; u16 configure_phy_mask; port_agent->timer_pending = false; @@ -369,13 +357,12 @@ static void scic_sds_mpc_agent_timeout_handler( configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; for (index = 0; index < SCI_MAX_PHYS; index++) { + struct scic_sds_phy *sci_phy = &ihost->phys[index].sci; + if (configure_phy_mask & (1 << index)) { - port_agent->link_up_handler( - controller, - port_agent, - scic_sds_phy_get_port(&controller->phy_table[index]), - &controller->phy_table[index] - ); + port_agent->link_up_handler(scic, port_agent, + scic_sds_phy_get_port(sci_phy), + sci_phy); } } } @@ -489,6 +476,7 @@ static enum sci_status scic_sds_apc_agent_validate_phy_configuration( u8 port_index; struct sci_sas_address sas_address; struct sci_sas_address phy_assigned_address; + struct isci_host *ihost = scic_to_ihost(controller); phy_index = 0; @@ -496,14 +484,12 @@ static enum sci_status scic_sds_apc_agent_validate_phy_configuration( port_index = phy_index; /* Get the assigned SAS Address for the first PHY on the controller. */ - scic_sds_phy_get_sas_address( - &controller->phy_table[phy_index], &sas_address - ); + scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + &sas_address); while (++phy_index < SCI_MAX_PHYS) { - scic_sds_phy_get_sas_address( - &controller->phy_table[phy_index], &phy_assigned_address - ); + scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + &phy_assigned_address); /* Verify each of the SAS address are all the same for every PHY */ if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) { @@ -739,33 +725,30 @@ static void scic_sds_apc_agent_link_down( } } -/** - * - * - * This routine will try to configure the phys into ports when the timer fires. - */ -static void scic_sds_apc_agent_timeout_handler( - void *object) +/* configure the phys into ports when the timer fires */ +static void scic_sds_apc_agent_timeout_handler(void *object) { u32 index; struct scic_sds_port_configuration_agent *port_agent; - struct scic_sds_controller *controller = (struct scic_sds_controller *)object; + struct scic_sds_controller *scic = object; + struct isci_host *ihost = scic_to_ihost(scic); u16 configure_phy_mask; - port_agent = scic_sds_controller_get_port_configuration_agent(controller); + port_agent = scic_sds_controller_get_port_configuration_agent(scic); port_agent->timer_pending = false; configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; - if (configure_phy_mask != 0x00) { - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (configure_phy_mask & (1 << index)) { - scic_sds_apc_agent_configure_ports( - controller, port_agent, &controller->phy_table[index], false - ); - } - } + if (!configure_phy_mask) + return; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if ((configure_phy_mask & (1 << index)) == 0) + continue; + + scic_sds_apc_agent_configure_ports(scic, port_agent, + &ihost->phys[index].sci, false); } } diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 160790a..3280049 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -63,61 +63,35 @@ struct scic_sds_phy; extern enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy); extern enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy); -/** - * isci_phy_init() - This function is called by the probe function to - * initialize the phy objects. This func assumes that the isci_port objects - * associated with the SCU have been initialized. - * @isci_phy: This parameter specifies the isci_phy object to initialize - * @isci_host: This parameter specifies the parent SCU host object for this - * isci_phy - * @index: This parameter specifies which SCU phy associates with this - * isci_phy. Generally, SCU phy 0 relates isci_phy 0, etc. - * - */ -void isci_phy_init( - struct isci_phy *phy, - struct isci_host *isci_host, - int index) +void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) { - struct scic_sds_phy *scic_phy; union scic_oem_parameters oem; - enum sci_status status = SCI_SUCCESS; - u64 sas_addr; - - /*--------------- SCU_Phy Initialization Stuff -----------------------*/ - - status = scic_controller_get_phy_handle(&isci_host->sci, index, &scic_phy); - if (status == SCI_SUCCESS) { - phy->sci_phy_handle = scic_phy; - scic_phy->iphy = phy; - } else - dev_err(&isci_host->pdev->dev, - "failed scic_controller_get_phy_handle\n"); - - scic_oem_parameters_get(&isci_host->sci, &oem); - sas_addr = oem.sds1.phys[index].sas_address.high; - sas_addr <<= 32; - sas_addr |= oem.sds1.phys[index].sas_address.low; - swab64s(&sas_addr); - - memcpy(phy->sas_addr, &sas_addr, sizeof(sas_addr)); - - phy->isci_port = NULL; - phy->sas_phy.enabled = 0; - phy->sas_phy.id = index; - phy->sas_phy.sas_addr = &phy->sas_addr[0]; - phy->sas_phy.frame_rcvd = (u8 *)&phy->frame_rcvd; - phy->sas_phy.ha = &isci_host->sas_ha; - phy->sas_phy.lldd_phy = phy; - phy->sas_phy.enabled = 1; - phy->sas_phy.class = SAS; - phy->sas_phy.iproto = SAS_PROTOCOL_ALL; - phy->sas_phy.tproto = 0; - phy->sas_phy.type = PHY_TYPE_PHYSICAL; - phy->sas_phy.role = PHY_ROLE_INITIATOR; - phy->sas_phy.oob_mode = OOB_NOT_CONNECTED; - phy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN; - memset((u8 *)&phy->frame_rcvd, 0, sizeof(phy->frame_rcvd)); + u64 sci_sas_addr; + __be64 sas_addr; + + scic_oem_parameters_get(&ihost->sci, &oem); + sci_sas_addr = oem.sds1.phys[index].sas_address.high; + sci_sas_addr <<= 32; + sci_sas_addr |= oem.sds1.phys[index].sas_address.low; + sas_addr = cpu_to_be64(sci_sas_addr); + memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr)); + + iphy->isci_port = NULL; + iphy->sas_phy.enabled = 0; + iphy->sas_phy.id = index; + iphy->sas_phy.sas_addr = &iphy->sas_addr[0]; + iphy->sas_phy.frame_rcvd = (u8 *)&iphy->frame_rcvd; + iphy->sas_phy.ha = &ihost->sas_ha; + iphy->sas_phy.lldd_phy = iphy; + iphy->sas_phy.enabled = 1; + iphy->sas_phy.class = SAS; + iphy->sas_phy.iproto = SAS_PROTOCOL_ALL; + iphy->sas_phy.tproto = 0; + iphy->sas_phy.type = PHY_TYPE_PHYSICAL; + iphy->sas_phy.role = PHY_ROLE_INITIATOR; + iphy->sas_phy.oob_mode = OOB_NOT_CONNECTED; + iphy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN; + memset(&iphy->frame_rcvd, 0, sizeof(iphy->frame_rcvd)); } @@ -147,14 +121,14 @@ int isci_phy_control(struct asd_sas_phy *sas_phy, switch (func) { case PHY_FUNC_DISABLE: spin_lock_irqsave(&ihost->scic_lock, flags); - scic_sds_phy_stop(iphy->sci_phy_handle); + scic_sds_phy_stop(&iphy->sci); spin_unlock_irqrestore(&ihost->scic_lock, flags); break; case PHY_FUNC_LINK_RESET: spin_lock_irqsave(&ihost->scic_lock, flags); - scic_sds_phy_stop(iphy->sci_phy_handle); - scic_sds_phy_start(iphy->sci_phy_handle); + scic_sds_phy_stop(&iphy->sci); + scic_sds_phy_start(&iphy->sci); spin_unlock_irqrestore(&ihost->scic_lock, flags); break; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 21f6050..93ec2d4 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -54,24 +54,17 @@ */ -#if !defined(_ISCI_PHY_H_) +#ifndef _ISCI_PHY_H_ #define _ISCI_PHY_H_ -#include "port.h" -#include "host.h" #include #include - - -/** - * struct isci_phy - This class implements the ISCI specific representation of - * the phy object. - * - * - */ +#include "scic_sds_phy.h" +#include "port.h" +#include "host.h" struct isci_phy { - struct scic_sds_phy *sci_phy_handle; + struct scic_sds_phy sci; struct asd_sas_phy sas_phy; struct isci_port *isci_port; u8 sas_addr[SAS_ADDR_SIZE]; @@ -82,17 +75,21 @@ struct isci_phy { } frame_rcvd; }; -#define to_isci_phy(p) \ - container_of(p, struct isci_phy, sas_phy); +static inline struct isci_phy *to_isci_phy(struct asd_sas_phy *sas_phy) +{ + struct isci_phy *iphy = container_of(sas_phy, typeof(*iphy), sas_phy); + + return iphy; +} + +static inline struct isci_phy *sci_phy_to_iphy(struct scic_sds_phy *sci_phy) +{ + struct isci_phy *iphy = container_of(sci_phy, typeof(*iphy), sci); -void isci_phy_init( - struct isci_phy *phy, - struct isci_host *isci_host, - int index); + return iphy; +} -int isci_phy_control( - struct asd_sas_phy *phy, - enum phy_func func, - void *buf); +void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index); +int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf); #endif /* !defined(_ISCI_PHY_H_) */ diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 6110306..5e87fed 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -120,44 +120,26 @@ static void isci_port_change_state( spin_unlock_irqrestore(&isci_port->state_lock, flags); } -void isci_port_bc_change_received( - struct isci_host *isci_host, - struct scic_sds_port *port, - struct scic_sds_phy *phy) +void isci_port_bc_change_received(struct isci_host *ihost, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { - struct isci_phy *isci_phy = phy->iphy; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - dev_dbg(&isci_host->pdev->dev, - "%s: isci_phy = %p, sas_phy = %p\n", - __func__, - isci_phy, - &isci_phy->sas_phy); - - isci_host->sas_ha.notify_port_event( - &isci_phy->sas_phy, - PORTE_BROADCAST_RCVD - ); + dev_dbg(&ihost->pdev->dev, "%s: iphy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); - scic_port_enable_broadcast_change_notification(port); + ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD); + scic_port_enable_broadcast_change_notification(sci_port); } -/** - * isci_port_link_up() - This function is called by the sci core when a link - * becomes active. the identify address frame is retrieved from the core and - * a notify port event is sent to libsas. - * @isci_host: This parameter specifies the isci host object. - * @port: This parameter specifies the sci port with the active link. - * @phy: This parameter specifies the sci phy with the active link. - * - */ -void isci_port_link_up( - struct isci_host *isci_host, - struct scic_sds_port *port, - struct scic_sds_phy *phy) +void isci_port_link_up(struct isci_host *isci_host, + struct scic_sds_port *port, + struct scic_sds_phy *phy) { unsigned long flags; struct scic_port_properties properties; - struct isci_phy *isci_phy = phy->iphy; + struct isci_phy *isci_phy = sci_phy_to_iphy(phy); struct isci_port *isci_port = port->iport; unsigned long success = true; diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index 8394f60..bb07ed3 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -67,7 +67,7 @@ static inline struct device *scic_to_dev(struct scic_sds_controller *scic) static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) { - struct isci_phy *iphy = sci_phy->iphy; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) return NULL; -- cgit v0.10.2 From e531381e2f8a68b8737c63c7bb890ad80b2470bd Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 7 May 2011 10:11:43 -0700 Subject: isci: unify port data structures Make scic_sds_port a member of isci_port and merge their lifetimes which means removing the port table from scic_sds_controller in favor of the one at the isci_host level. Merge ihost->sas_ports into ihost->ports. _ Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 4ad3155..4179bdf3 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -623,9 +623,10 @@ static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller u32 index; enum sci_status port_status; enum sci_status status = SCI_SUCCESS; + struct isci_host *ihost = scic_to_ihost(scic); for (index = 0; index < scic->logical_port_entries; index++) { - struct scic_sds_port *sci_port = &scic->port_table[index]; + struct scic_sds_port *sci_port = &ihost->ports[index].sci; scic_sds_port_handler_t stop; stop = sci_port->state_handlers->stop_handler; @@ -2686,7 +2687,7 @@ enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) (result == SCI_SUCCESS); index++) { result = scic_sds_port_initialize( - &scic->port_table[index], + &ihost->ports[index].sci, &scic->scu_registers->peg0.ptsg.port[index], &scic->scu_registers->peg0.ptsg.protocol_engine, &scic->scu_registers->peg0.viit[index]); @@ -2709,8 +2710,9 @@ enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) } enum sci_status scic_controller_start(struct scic_sds_controller *scic, - u32 timeout) + u32 timeout) { + struct isci_host *ihost = scic_to_ihost(scic); enum sci_status result; u16 index; @@ -2752,10 +2754,9 @@ enum sci_status scic_controller_start(struct scic_sds_controller *scic, /* Start all of the ports on this controller */ for (index = 0; index < scic->logical_port_entries; index++) { - struct scic_sds_port *sci_port = &scic->port_table[index]; + struct scic_sds_port *sci_port = &ihost->ports[index].sci; - result = sci_port->state_handlers->start_handler( - sci_port); + result = sci_port->state_handlers->start_handler(sci_port); if (result) return result; } @@ -2944,14 +2945,14 @@ enum sci_status scic_controller_construct(struct scic_sds_controller *scic, /* Construct the ports for this controller */ for (i = 0; i < SCI_MAX_PORTS; i++) - scic_sds_port_construct(&scic->port_table[i], i, scic); - scic_sds_port_construct(&scic->port_table[i], SCIC_SDS_DUMMY_PORT, scic); + scic_sds_port_construct(&ihost->ports[i].sci, i, scic); + scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic); /* Construct the phys for this controller */ for (i = 0; i < SCI_MAX_PHYS; i++) { /* Add all the PHYs to the dummy port */ scic_sds_phy_construct(&ihost->phys[i].sci, - &scic->port_table[SCI_MAX_PORTS], i); + &ihost->ports[SCI_MAX_PORTS].sci, i); } scic->invalid_phy_mask = 0; diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index aaaf15a..0d50473 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -161,13 +161,6 @@ struct scic_sds_controller { struct scic_sds_port_configuration_agent port_agent; /** - * This field is the array of port objects that are controlled by this - * controller object. There is one dummy port object also contained within - * this controller object. - */ - struct scic_sds_port port_table[SCI_MAX_PORTS + 1]; - - /** * This field is the array of device objects that are currently constructed * for this controller object. This table is used as a fast lookup of device * objects that need to handle device completion notifications from the diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 84b8abb..01288dd 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -283,18 +283,14 @@ static enum sci_status scic_sds_port_clear_phy( struct scic_sds_phy *phy) { /* Make sure that this phy is part of this port */ - if ( - (port->phy_table[phy->phy_index] == phy) - && (scic_sds_phy_get_port(phy) == port) - ) { - /* Yep it is assigned to this port so remove it */ - scic_sds_phy_set_port( - phy, - &scic_sds_port_get_controller(port)->port_table[SCI_MAX_PORTS] - ); + if (port->phy_table[phy->phy_index] == phy && + scic_sds_phy_get_port(phy) == port) { + struct scic_sds_controller *scic = port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + /* Yep it is assigned to this port so remove it */ + scic_sds_phy_set_port(phy, &ihost->ports[SCI_MAX_PORTS].sci); port->phy_table[phy->phy_index] = NULL; - return SCI_SUCCESS; } @@ -643,7 +639,7 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, bool do_notify_user) { struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_port *iport = sci_port->iport; + struct isci_port *iport = sci_port_to_iport(sci_port); struct isci_host *ihost = scic_to_ihost(scic); struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); @@ -1620,10 +1616,9 @@ static void scic_sds_port_ready_substate_operational_enter(void *object) { u32 index; struct scic_sds_port *sci_port = object; - struct scic_sds_controller *scic = - scic_sds_port_get_controller(sci_port); + struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port->iport; + struct isci_port *iport = sci_port_to_iport(sci_port); scic_sds_port_set_ready_state_handlers( sci_port, @@ -1661,10 +1656,9 @@ static void scic_sds_port_ready_substate_operational_enter(void *object) static void scic_sds_port_ready_substate_operational_exit(void *object) { struct scic_sds_port *sci_port = object; - struct scic_sds_controller *scic = - scic_sds_port_get_controller(sci_port); + struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port->iport; + struct isci_port *iport = sci_port_to_iport(sci_port); /* * Kill the dummy task for this port if it has not yet posted @@ -1692,10 +1686,9 @@ static void scic_sds_port_ready_substate_operational_exit(void *object) static void scic_sds_port_ready_substate_configuring_enter(void *object) { struct scic_sds_port *sci_port = object; - struct scic_sds_controller *scic = - scic_sds_port_get_controller(sci_port); + struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port->iport; + struct isci_port *iport = sci_port_to_iport(sci_port); scic_sds_port_set_ready_state_handlers( sci_port, @@ -2259,7 +2252,7 @@ static void scic_sds_port_ready_state_enter(void *object) struct scic_sds_port *sci_port = object; struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port->iport; + struct isci_port *iport = sci_port_to_iport(sci_port); u32 prev_state; /* Put the ready state handlers in place though they will not be there long */ @@ -2366,7 +2359,7 @@ scic_sds_port_stopping_state_exit(void *object) static void scic_sds_port_failed_state_enter(void *object) { struct scic_sds_port *sci_port = object; - struct isci_port *iport = sci_port->iport; + struct isci_port *iport = sci_port_to_iport(sci_port); scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_FAILED); @@ -2398,11 +2391,9 @@ static const struct sci_base_state scic_sds_port_state_table[] = { } }; -void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, +void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, struct scic_sds_controller *scic) { - u32 index; - sci_base_state_machine_construct(&sci_port->state_machine, sci_port, scic_sds_port_state_table, @@ -2416,7 +2407,7 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, SCIC_SDS_PORT_READY_SUBSTATE_WAITING); sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; - sci_port->physical_port_index = port_index; + sci_port->physical_port_index = index; sci_port->active_phy_mask = 0; sci_port->owning_controller = scic; @@ -2428,7 +2419,6 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 port_index, sci_port->reserved_tci = SCU_DUMMY_INDEX; sci_port->timer_handle = NULL; - sci_port->port_task_scheduler_registers = NULL; for (index = 0; index < SCI_MAX_PHYS; index++) diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 213d423..3633561 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -151,17 +151,12 @@ enum scic_sds_port_states { }; -struct isci_port; /** * struct scic_sds_port * * The core port object provides the the abstraction for an SCU port. */ struct scic_sds_port { - /** - * The field specifies the peer object for the port. - */ - struct isci_port *iport; /** * This field contains the information for the base port state machine. diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index aa7ac95..2d3d067 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -141,14 +141,15 @@ static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( scic_sds_phy_get_attached_sas_address(phy, &phy_attached_device_address); for (i = 0; i < scic->logical_port_entries; i++) { - struct scic_sds_port *port = &scic->port_table[i]; + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_port *sci_port = &ihost->ports[i].sci; - scic_sds_port_get_sas_address(port, &port_sas_address); - scic_sds_port_get_attached_sas_address(port, &port_attached_device_address); + scic_sds_port_get_sas_address(sci_port, &port_sas_address); + scic_sds_port_get_attached_sas_address(sci_port, &port_attached_device_address); - if ((sci_sas_address_compare(port_sas_address, phy_sas_address) == 0) && - (sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0)) - return port; + if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && + sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) + return sci_port; } return NULL; @@ -324,7 +325,7 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( port_agent->phy_valid_port_range[phy_index].min_index = port_index; port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - scic_sds_port_add_phy(&controller->port_table[port_index], + scic_sds_port_add_phy(&ihost->ports[port_index].sci, &ihost->phys[phy_index].sci); assigned_phy_mask |= (1 << phy_index); @@ -550,6 +551,7 @@ static void scic_sds_apc_agent_configure_ports( enum sci_status status; struct scic_sds_port *port; enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; + struct isci_host *ihost = scic_to_ihost(controller); port = scic_sds_port_configuration_agent_find_port(controller, phy); @@ -571,7 +573,7 @@ static void scic_sds_apc_agent_configure_ports( port_index++ ) { - port = &controller->port_table[port_index]; + port = &ihost->ports[port_index].sci; /* First we must make sure that this PHY can be added to this Port. */ if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) { diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index d180ad8..cdd99304 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -277,10 +277,10 @@ void isci_host_deinit(struct isci_host *ihost) isci_host_change_state(ihost, isci_stopping); for (i = 0; i < SCI_MAX_PORTS; i++) { - struct isci_port *port = &ihost->isci_ports[i]; + struct isci_port *iport = &ihost->ports[i]; struct isci_remote_device *idev, *d; - list_for_each_entry_safe(idev, d, &port->remote_dev_list, node) { + list_for_each_entry_safe(idev, d, &iport->remote_dev_list, node) { isci_remote_device_change_state(idev, isci_stopping); isci_remote_device_stop(ihost, idev); } @@ -442,7 +442,7 @@ int isci_host_init(struct isci_host *isci_host) return -ENOMEM; for (i = 0; i < SCI_MAX_PORTS; i++) - isci_port_init(&isci_host->isci_ports[i], isci_host, i); + isci_port_init(&isci_host->ports[i], isci_host, i); for (i = 0; i < SCI_MAX_PHYS; i++) isci_phy_init(&isci_host->phys[i], isci_host, i); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 00e4854..5a414c3 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -84,12 +84,7 @@ struct isci_host { struct dma_pool *dma_pool; unsigned int dma_pool_alloc_size; struct isci_phy phys[SCI_MAX_PHYS]; - - /* isci_ports and sas_ports are implicitly parallel to the - * ports maintained by the core - */ - struct isci_port isci_ports[SCI_MAX_PORTS]; - struct asd_sas_port sas_ports[SCI_MAX_PORTS]; + struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ struct sas_ha_struct sas_ha; int can_queue; diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index a5d5c0b..522d39f 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -221,8 +221,8 @@ static int isci_register_sas_ha(struct isci_host *isci_host) /* set the array of phy and port structs. */ for (i = 0; i < SCI_MAX_PHYS; i++) { - sas_phys[i] = &(isci_host->phys[i].sas_phy); - sas_ports[i] = &(isci_host->sas_ports[i]); + sas_phys[i] = &isci_host->phys[i].sas_phy; + sas_ports[i] = &isci_host->ports[i].sas_port; } sas_ha->sas_phy = sas_phys; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 5e87fed..35e2e51 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -70,29 +70,30 @@ #include "request.h" #include "core/scic_sds_controller.h" -static void isci_port_change_state( - struct isci_port *isci_port, - enum isci_status status); +static void isci_port_change_state(struct isci_port *iport, enum isci_status status) +{ + unsigned long flags; + dev_dbg(&iport->isci_host->pdev->dev, + "%s: iport = %p, state = 0x%x\n", + __func__, iport, status); + /* XXX pointless lock */ + spin_lock_irqsave(&iport->state_lock, flags); + iport->status = status; + spin_unlock_irqrestore(&iport->state_lock, flags); +} void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) { - struct scic_sds_port *sci_port; - INIT_LIST_HEAD(&iport->remote_dev_list); INIT_LIST_HEAD(&iport->domain_dev_list); spin_lock_init(&iport->state_lock); init_completion(&iport->start_complete); iport->isci_host = ihost; isci_port_change_state(iport, isci_freed); - - sci_port = &ihost->sci.port_table[index]; - iport->sci_port_handle = sci_port; - sci_port->iport = iport; } - /** * isci_port_get_state() - This function gets the status of the port object. * @isci_port: This parameter points to the isci_port object @@ -105,21 +106,6 @@ enum isci_status isci_port_get_state( return isci_port->status; } -static void isci_port_change_state( - struct isci_port *isci_port, - enum isci_status status) -{ - unsigned long flags; - - dev_dbg(&isci_port->isci_host->pdev->dev, - "%s: isci_port = %p, state = 0x%x\n", - __func__, isci_port, status); - - spin_lock_irqsave(&isci_port->state_lock, flags); - isci_port->status = status; - spin_unlock_irqrestore(&isci_port->state_lock, flags); -} - void isci_port_bc_change_received(struct isci_host *ihost, struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy) @@ -140,7 +126,7 @@ void isci_port_link_up(struct isci_host *isci_host, unsigned long flags; struct scic_port_properties properties; struct isci_phy *isci_phy = sci_phy_to_iphy(phy); - struct isci_port *isci_port = port->iport; + struct isci_port *isci_port = sci_port_to_iport(port); unsigned long success = true; BUG_ON(isci_phy->isci_port != NULL); @@ -346,8 +332,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor spin_lock_irqsave(&ihost->scic_lock, flags); #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT - status = scic_port_hard_reset(iport->sci_port_handle, - ISCI_PORT_RESET_TIMEOUT); + status = scic_port_hard_reset(&iport->sci, ISCI_PORT_RESET_TIMEOUT); spin_unlock_irqrestore(&ihost->scic_lock, flags); diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index ac1ac86..3550345 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -53,19 +53,12 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the isci_port object definition. - * - * port.h - */ - -#if !defined(_ISCI_PORT_H_) +#ifndef _ISCI_PORT_H_ #define _ISCI_PORT_H_ +#include "scic_sds_port.h" struct isci_phy; struct isci_host; -struct scic_sds_phy; - enum isci_status { isci_freed = 0x00, @@ -84,9 +77,6 @@ enum isci_status { * */ struct isci_port { - - struct scic_sds_port *sci_port_handle; - enum isci_status status; struct isci_host *isci_host; struct asd_sas_port sas_port; @@ -96,16 +86,19 @@ struct isci_port { struct completion start_complete; struct completion hard_reset_complete; enum sci_status hard_reset_status; + struct scic_sds_port sci; }; -#define to_isci_port(p) \ - container_of(p, struct isci_port, sas_port); +static inline struct isci_port *sci_port_to_iport(struct scic_sds_port *sci_port) +{ + struct isci_port *iport = container_of(sci_port, typeof(*iport), sci); + + return iport; +} enum isci_status isci_port_get_state( struct isci_port *isci_port); - - void isci_port_formed( struct asd_sas_phy *); diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 734d028..a441c23 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1264,7 +1264,7 @@ static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *s static enum sci_status isci_remote_device_construct(struct isci_port *iport, struct isci_remote_device *idev) { - struct scic_sds_port *sci_port = iport->sci_port_handle; + struct scic_sds_port *sci_port = &iport->sci; struct isci_host *ihost = iport->isci_host; struct domain_device *dev = idev->domain_dev; enum sci_status status; diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index bb07ed3..1806969 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -77,7 +77,7 @@ static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) { - struct isci_port *iport = sci_port->iport; + struct isci_port *iport = sci_port_to_iport(sci_port); if (!iport || !iport->isci_host) return NULL; -- cgit v0.10.2 From 827a84d4e036b342b31abc2bcc3893505c2c7daa Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 7 May 2011 15:59:09 -0700 Subject: isci: move stp request info to scic_sds_request In preparation for unifying allocation of all request information make stp data available in all requests. Incidentally collapse indentation. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 52692a16..fd7bd33 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -710,8 +710,7 @@ enum sci_status scic_io_request_construct_basic_sata( struct isci_request *isci_request = sci_req->ireq; struct sas_task *task = isci_request_access_task(isci_request); - stp_req = container_of(sci_req, typeof(*stp_req), parent); - + stp_req = &sci_req->stp.req; sci_req->protocol = SCIC_STP_PROTOCOL; copy = (task->data_dir == DMA_NONE) ? false : true; diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index b83d893..c93f3ed 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -56,16 +56,10 @@ #ifndef _SCIC_SDS_IO_REQUEST_H_ #define _SCIC_SDS_IO_REQUEST_H_ -/** - * This file contains the structures, constants and prototypes for the - * SCIC_SDS_IO_REQUEST object. - * - * - */ - #include "scic_io_request.h" #include "sci_base_state_machine.h" #include "scu_task_context.h" +#include "scic_sds_stp_request.h" struct scic_sds_controller; struct scic_sds_remote_device; @@ -233,8 +227,19 @@ struct scic_sds_request { */ u8 device_sequence; + struct { + struct scic_sds_stp_request req; + } stp; }; +static inline struct scic_sds_request *to_sci_req(struct scic_sds_stp_request *stp_req) +{ + struct scic_sds_request *sci_req; + + sci_req = container_of(stp_req, typeof(*sci_req), stp.req); + return sci_req; +} + /** * enum sci_base_request_states - This enumeration depicts all the states for * the common request state machine. diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 8569dba..7dba40f 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -134,8 +134,7 @@ u32 scic_sds_stp_request_get_object_size(void) void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) { - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; sci_req->command_buffer = scic_sds_stp_request_get_h2d_reg_buffer(stp_req); sci_req->response_buffer = scic_sds_stp_request_get_response_buffer(stp_req); @@ -344,17 +343,18 @@ enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_ * utilizing the raw frame method. none */ static void scu_stp_raw_request_construct_task_context( - struct scic_sds_stp_request *sci_req, + struct scic_sds_stp_request *stp_req, struct scu_task_context *task_context) { - scu_sata_reqeust_construct_task_context(&sci_req->parent, task_context); + struct scic_sds_request *sci_req = to_sci_req(stp_req); + + scu_sata_reqeust_construct_task_context(sci_req, task_context); task_context->control_frame = 0; task_context->priority = SCU_TASK_PRIORITY_NORMAL; task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; task_context->type.stp.fis_type = FIS_REGH2D; - task_context->transfer_length_bytes = - sizeof(struct host_to_dev_fis) - sizeof(u32); + task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); } void scic_stp_io_request_set_ncq_tag( @@ -376,10 +376,11 @@ void *scic_stp_io_request_get_h2d_reg_address( } -void *scic_stp_io_request_get_d2h_reg_address( - struct scic_sds_request *req) +void *scic_stp_io_request_get_d2h_reg_address(struct scic_sds_request *sci_req) { - return &((struct scic_sds_stp_request *)req)->d2h_reg_fis; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + + return &stp_req->d2h_reg_fis; } /** @@ -395,7 +396,7 @@ void *scic_stp_io_request_get_d2h_reg_address( static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) { struct scu_sgl_element *current_sgl; - struct scic_sds_request *sci_req = &stp_req->parent; + struct scic_sds_request *sci_req = to_sci_req(stp_req); struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { @@ -489,60 +490,54 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( enum sci_status status; struct dev_to_host_fis *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); - - status = scic_sds_unsolicited_frame_control_get_header( - &stp_req->parent.owning_controller->uf_control, - frame_index, - (void **)&frame_header); - - if (status == SCI_SUCCESS) { - switch (frame_header->fis_type) { - case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer( - &stp_req->parent.owning_controller->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response( - &stp_req->d2h_reg_fis, - (u32 *)frame_header, - frame_buffer); - - /* The command has completed with error */ - scic_sds_request_set_status( - &stp_req->parent, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; - - default: - dev_warn(scic_to_dev(sci_req->owning_controller), - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", - __func__, stp_req, frame_index); - - scic_sds_request_set_status( - &stp_req->parent, - SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); - break; - } + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; - sci_base_state_machine_change_state( - &stp_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame( - stp_req->parent.owning_controller, frame_index); - } else + if (status != SCI_SUCCESS) { dev_err(scic_to_dev(sci_req->owning_controller), "%s: SCIC IO Request 0x%p could not get frame header " "for frame index %d, status %x\n", __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + frame_header, + frame_buffer); + + /* The command has completed with error */ + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION); + break; + } + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + return status; } @@ -599,8 +594,7 @@ static const struct sci_base_state scic_sds_stp_request_started_non_data_substat enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req) { - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; scic_sds_stp_non_ncq_request_construct(sci_req); @@ -617,36 +611,28 @@ enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request #define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ -/** - * - * @sci_req: - * @length: - * - * This function will transmit DATA_FIS from (current sgl + offset) for input +/* transmit DATA_FIS from (current sgl + offset) for input * parameter length. current sgl and offset is alreay stored in the IO request - * enum sci_status */ - static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( struct scic_sds_request *sci_req, u32 length) { - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scu_task_context *task_context; struct scu_sgl_element *current_sgl; - /* - * Recycle the TC and reconstruct it for sending out DATA FIS containing - * for the data from current_sgl+offset for the input length */ - struct scu_task_context *task_context = scic_sds_controller_get_task_context_buffer( - sci_req->owning_controller, - sci_req->io_tag - ); + /* Recycle the TC and reconstruct it for sending out DATA FIS containing + * for the data from current_sgl+offset for the input length + */ + task_context = scic_sds_controller_get_task_context_buffer(scic, + sci_req->io_tag); if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) - current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); + current_sgl = &stp_req->type.pio.request_current.sgl_pair->A; else - current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); + current_sgl = &stp_req->type.pio.request_current.sgl_pair->B; /* update the TC */ task_context->command_iu_upper = current_sgl->address_upper; @@ -658,23 +644,14 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( return scic_controller_continue_io(sci_req); } -/** - * - * @sci_req: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data( - struct scic_sds_request *sci_req) +static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req) { struct scu_sgl_element *current_sgl; u32 sgl_offset; u32 remaining_bytes_in_current_sgl = 0; enum sci_status status = SCI_SUCCESS; - - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; sgl_offset = stp_req->type.pio.request_current.sgl_offset; @@ -740,7 +717,7 @@ scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *s void *kaddr; int total_len = len; - sci_req = &stp_req->parent; + sci_req = to_sci_req(stp_req); ireq = scic_sds_request_get_user_request(sci_req); task = isci_request_access_task(ireq); src_addr = data_buf; @@ -846,234 +823,184 @@ static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completi return status; } -/** - * - * @sci_req: - * @frame_index: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) +static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) { - enum sci_status status; - struct dev_to_host_fis *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; struct isci_request *ireq = sci_req->ireq; struct sas_task *task = isci_request_access_task(ireq); + struct dev_to_host_fis *frame_header; + enum sci_status status; + u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header( - &(stp_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_header); + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); - if (status == SCI_SUCCESS) { - switch (frame_header->fis_type) { - case FIS_PIO_SETUP: - /* Get from the frame buffer the PIO Setup Data */ - scic_sds_unsolicited_frame_control_get_buffer( - &(stp_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_buffer); - - /* Get the data from the PIO Setup The SCU Hardware - * returns first word in the frame_header and the rest - * of the data is in the frame buffer so we need to back - * up one dword - */ + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_PIO_SETUP: + /* Get from the frame buffer the PIO Setup Data */ + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + /* Get the data from the PIO Setup The SCU Hardware returns + * first word in the frame_header and the rest of the data is in + * the frame buffer so we need to back up one dword + */ - /* transfer_count: first 16bits in the 4th dword */ - stp_req->type.pio.pio_transfer_bytes = - frame_buffer[3] & 0xffff; + /* transfer_count: first 16bits in the 4th dword */ + stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; - /* ending_status: 4th byte in the 3rd dword */ - stp_req->type.pio.ending_status = - (frame_buffer[2] >> 24) & 0xff; + /* ending_status: 4th byte in the 3rd dword */ + stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; - scic_sds_controller_copy_sata_response( - &stp_req->d2h_reg_fis, - (u32 *)frame_header, - frame_buffer); + scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + frame_header, + frame_buffer); - stp_req->d2h_reg_fis.status = - stp_req->type.pio.ending_status; + stp_req->d2h_reg_fis.status = stp_req->type.pio.ending_status; - /* The next state is dependent on whether the - * request was PIO Data-in or Data out + /* The next state is dependent on whether the + * request was PIO Data-in or Data out + */ + if (task->data_dir == DMA_FROM_DEVICE) { + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); + } else if (task->data_dir == DMA_TO_DEVICE) { + /* Transmit data */ + status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); + if (status != SCI_SUCCESS) + break; + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); + } + break; + case FIS_SETDEVBITS: + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + break; + case FIS_REGD2H: + if (frame_header->status & ATA_BUSY) { + /* Now why is the drive sending a D2H Register FIS when + * it is still busy? Do nothing since we are still in + * the right state. */ - if (task->data_dir == DMA_FROM_DEVICE) { - sci_base_state_machine_change_state( - &stp_req->parent.started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); - } else if (task->data_dir == DMA_TO_DEVICE) { - /* Transmit data */ - status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); - if (status == SCI_SUCCESS) { - sci_base_state_machine_change_state( - &stp_req->parent.started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); - } - } + dev_dbg(scic_to_dev(scic), + "%s: SCIC PIO Request 0x%p received " + "D2H Register FIS with BSY status " + "0x%x\n", __func__, stp_req, + frame_header->status); break; + } - case FIS_SETDEVBITS: - sci_base_state_machine_change_state( - &stp_req->parent.started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); - break; + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); - case FIS_REGD2H: - if ((frame_header->status & ATA_BUSY) == 0) { - scic_sds_unsolicited_frame_control_get_buffer( - &(stp_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response( - &stp_req->d2h_reg_fis, - (u32 *)frame_header, - frame_buffer); - - scic_sds_request_set_status( - &stp_req->parent, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - sci_base_state_machine_change_state( - &stp_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - } else { - /* Now why is the drive sending a D2H Register - * FIS when it is still busy? - * Do nothing since we are still in the right - * state. - */ - dev_dbg(scic_to_dev(sci_req->owning_controller), - "%s: SCIC PIO Request 0x%p received " - "D2H Register FIS with BSY status " - "0x%x\n", - __func__, - stp_req, - frame_header->status); - } - break; + scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + frame_header, + frame_buffer); - default: - /* FIXME: what do we do here? */ - break; - } + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame( - stp_req->parent.owning_controller, - frame_index); - } else - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + default: + /* FIXME: what do we do here? */ + break; + } + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); return status; } -/** - * - * @sci_req: - * @frame_index: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) +static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) { enum sci_status status; struct dev_to_host_fis *frame_header; struct sata_fis_data *frame_buffer; - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; - status = scic_sds_unsolicited_frame_control_get_header( - &(stp_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_header); + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); - if (status == SCI_SUCCESS) { - if (frame_header->fis_type == FIS_DATA) { - if (stp_req->type.pio.request_current.sgl_pair == - NULL) { - stp_req->parent.saved_rx_frame_index = - frame_index; - stp_req->type.pio.pio_transfer_bytes = 0; - } else { - status = scic_sds_unsolicited_frame_control_get_buffer( - &(stp_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_buffer); - - status = scic_sds_stp_request_pio_data_in_copy_data( - stp_req, - (u8 *)frame_buffer); - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame( - stp_req->parent.owning_controller, - frame_index); - } + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } - /* - * Check for the end of the transfer, are there more - * bytes remaining for this data transfer - */ - if ((status == SCI_SUCCESS) && - (stp_req->type.pio.pio_transfer_bytes == 0)) { - if ((stp_req->type.pio.ending_status & - ATA_BUSY) == 0) { - scic_sds_request_set_status( - &stp_req->parent, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - sci_base_state_machine_change_state( - &stp_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - } else { - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); - } - } + if (frame_header->fis_type == FIS_DATA) { + if (stp_req->type.pio.request_current.sgl_pair == NULL) { + sci_req->saved_rx_frame_index = frame_index; + stp_req->type.pio.pio_transfer_bytes = 0; } else { - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC PIO Request 0x%p received frame %d " - "with fis type 0x%02x when expecting a data " - "fis.\n", - __func__, - stp_req, - frame_index, - frame_header->fis_type); - - scic_sds_request_set_status( - &stp_req->parent, - SCU_TASK_DONE_GOOD, - SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); - sci_base_state_machine_change_state( - &stp_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, + (u8 *)frame_buffer); /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame( - stp_req->parent.owning_controller, - frame_index); + scic_sds_controller_release_frame(scic, frame_index); } - } else - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); + + /* Check for the end of the transfer, are there more + * bytes remaining for this data transfer + */ + if (status != SCI_SUCCESS || + stp_req->type.pio.pio_transfer_bytes != 0) + return status; + + if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + } else { + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + } + } else { + dev_err(scic_to_dev(scic), + "%s: SCIC PIO Request 0x%p received frame %d " + "with fis type 0x%02x when expecting a data " + "fis.\n", __func__, stp_req, frame_index, + frame_header->fis_type); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + } return status; } @@ -1093,8 +1020,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_com { enum sci_status status = SCI_SUCCESS; bool all_frames_transferred = false; - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): @@ -1280,8 +1206,7 @@ enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, bool copy_rx_frame) { - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; scic_sds_stp_non_ncq_request_construct(sci_req); @@ -1325,91 +1250,66 @@ static void scic_sds_stp_request_udma_complete_request( SCI_BASE_REQUEST_STATE_COMPLETED); } -/** - * - * @sci_req: - * @frame_index: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_udma_general_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) +static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) { - enum sci_status status; + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; struct dev_to_host_fis *frame_header; + enum sci_status status; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header( - &sci_req->owning_controller->uf_control, - frame_index, - (void **)&frame_header); + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); if ((status == SCI_SUCCESS) && (frame_header->fis_type == FIS_REGD2H)) { - scic_sds_unsolicited_frame_control_get_buffer( - &sci_req->owning_controller->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response( - &((struct scic_sds_stp_request *)sci_req)->d2h_reg_fis, - (u32 *)frame_header, - frame_buffer); + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + frame_header, + frame_buffer); } - scic_sds_controller_release_frame( - sci_req->owning_controller, frame_index); + scic_sds_controller_release_frame(scic, frame_index); return status; } -/** - * This method process TC completions while in the state where we are waiting - * for TC completions. - * @sci_req: - * @completion_code: - * - * enum sci_status - */ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( - struct scic_sds_request *request, + struct scic_sds_request *sci_req, u32 completion_code) { + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; enum sci_status status = SCI_SUCCESS; - struct scic_sds_stp_request *sci_req = (struct scic_sds_stp_request *)request; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_stp_request_udma_complete_request( - &sci_req->parent, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS); break; - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): /* * We must check ther response buffer to see if the D2H Register FIS was * received before we got the TC completion. */ - if (sci_req->d2h_reg_fis.fis_type == FIS_REGD2H) { - scic_sds_remote_device_suspend( - sci_req->parent.target_device, - SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)) - ); + if (stp_req->d2h_reg_fis.fis_type == FIS_REGD2H) { + scic_sds_remote_device_suspend(sci_req->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); - scic_sds_stp_request_udma_complete_request( - &sci_req->parent, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); } else { /* * If we have an error completion status for the TC then we can expect a * D2H register FIS from the device so we must change state to wait for it */ - sci_base_state_machine_change_state( - &sci_req->parent.started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE - ); + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE); } break; @@ -1422,18 +1322,14 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): - scic_sds_remote_device_suspend( - sci_req->parent.target_device, - SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)) - ); + scic_sds_remote_device_suspend(sci_req->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); /* Fall through to the default case */ default: /* All other completion status cause the IO to be complete. */ - scic_sds_stp_request_udma_complete_request( - &sci_req->parent, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); break; } @@ -1449,13 +1345,12 @@ static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler /* Use the general frame handler to copy the resposne data */ status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); - if (status == SCI_SUCCESS) { - scic_sds_stp_request_udma_complete_request( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID - ); - } + if (status != SCI_SUCCESS) + return status; + + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); return status; } @@ -1636,67 +1531,58 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_c * if the received frame was processed successfully. */ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( - struct scic_sds_request *request, + struct scic_sds_request *sci_req, u32 frame_index) { enum sci_status status; struct dev_to_host_fis *frame_header; u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = - (struct scic_sds_stp_request *)request; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } - status = scic_sds_unsolicited_frame_control_get_header( - &(stp_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_header); + switch (frame_header->fis_type) { + case FIS_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); - if (status == SCI_SUCCESS) { - switch (frame_header->fis_type) { - case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer( - &(stp_req->parent.owning_controller->uf_control), - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response( - &stp_req->d2h_reg_fis, - (u32 *)frame_header, - frame_buffer); - - /* The command has completed with error */ - scic_sds_request_set_status( - &stp_req->parent, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; + scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + frame_header, + frame_buffer); - default: - dev_warn(scic_to_dev(request->owning_controller), - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", - __func__, - stp_req, - frame_index); - - scic_sds_request_set_status( - &stp_req->parent, - SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); - break; - } + /* The command has completed with error */ + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + break; - sci_base_state_machine_change_state( - &stp_req->parent.state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + default: + dev_warn(scic_to_dev(scic), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame( - stp_req->parent.owning_controller, frame_index); - } else - dev_err(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION); + break; + } + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); return status; } @@ -1787,8 +1673,7 @@ static const struct sci_base_state scic_sds_stp_request_started_soft_reset_subst enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req) { - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; scic_sds_stp_non_ncq_request_construct(sci_req); diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index 50cb48e..6d02030 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -58,17 +58,8 @@ #include #include -#include "scic_sds_request.h" -/** - * This structure represents the additional information that is required to - * handle SATA PIO requests. - * - * - */ struct scic_sds_stp_request { - struct scic_sds_request parent; - struct dev_to_host_fis d2h_reg_fis; union { @@ -125,7 +116,6 @@ struct scic_sds_stp_request { u32 device_preferred_cdb_length; } packet; } type; - }; /** diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index cabad0b..12f2df9 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -64,7 +64,7 @@ #include "request.h" #include "sata.h" #include "task.h" -#include "scic_sds_stp_request.h" +#include "scic_sds_request.h" /** * isci_task_refuse() - complete the request to the upper layer driver in @@ -1435,8 +1435,7 @@ isci_task_request_complete(struct isci_host *ihost, struct isci_tmf *tmf = isci_request_access_tmf(ireq); struct completion *tmf_complete; struct scic_sds_request *sci_req = ireq->sci_request_handle; - struct scic_sds_stp_request *stp_req = - container_of(sci_req, typeof(*stp_req), parent); + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; dev_dbg(&ihost->pdev->dev, "%s: request = %p, status=%d\n", -- cgit v0.10.2 From 0d84366fbef557f92ef82ac9a224c57ffb3318bc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 May 2011 01:56:57 -0700 Subject: isci: make sgl explicit/aligned request object member Towards unifying request objects we need all members to be defined in the object and not carved out of anonymous buffer space. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index fd7bd33..189a799 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -212,8 +212,7 @@ static u32 scic_sds_ssp_request_get_object_size(void) return sizeof(struct scic_sds_request) + scic_ssp_io_request_get_object_size() + sizeof(struct scu_task_context) - + SMP_CACHE_BYTES - + sizeof(struct scu_sgl_element_pair) * SCU_MAX_SGL_ELEMENT_PAIRS; + + SMP_CACHE_BYTES; } /** @@ -239,7 +238,7 @@ static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( return &task_context->sgl_pair_cd; } - return &sci_req->sgl_element_pair_buffer[sgl_pair_index - 2]; + return &sci_req->sg_table[sgl_pair_index - 2]; } /** @@ -328,11 +327,6 @@ static void scic_sds_ssp_io_request_assign_buffers( scic_sds_ssp_request_get_command_buffer(sci_req); sci_req->response_buffer = scic_sds_ssp_request_get_response_buffer(sci_req); - sci_req->sgl_element_pair_buffer = - scic_sds_ssp_request_get_sgl_element_buffer(sci_req); - sci_req->sgl_element_pair_buffer = - PTR_ALIGN(sci_req->sgl_element_pair_buffer, - sizeof(struct scu_sgl_element_pair)); if (sci_req->was_tag_assigned_by_user == false) { sci_req->task_context_buffer = @@ -535,7 +529,6 @@ static void scic_sds_ssp_task_request_assign_buffers( scic_sds_ssp_task_request_get_command_buffer(sci_req); sci_req->response_buffer = scic_sds_ssp_task_request_get_response_buffer(sci_req); - sci_req->sgl_element_pair_buffer = NULL; if (sci_req->was_tag_assigned_by_user == false) { sci_req->task_context_buffer = diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index c93f3ed..83d737a 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -60,6 +60,7 @@ #include "sci_base_state_machine.h" #include "scu_task_context.h" #include "scic_sds_stp_request.h" +#include "scu_constants.h" struct scic_sds_controller; struct scic_sds_remote_device; @@ -183,7 +184,10 @@ struct scic_sds_request { void *command_buffer; void *response_buffer; struct scu_task_context *task_context_buffer; - struct scu_sgl_element_pair *sgl_element_pair_buffer; + + /* could be larger with sg chaining */ + #define SCU_SGL_SIZE ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2) + struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); /** * This field indicates if this request is a task management request or @@ -328,14 +332,6 @@ struct scic_sds_io_request_state_handler { extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[]; /** - * - * - * This macro returns the maximum number of SGL element paris that we will - * support in a single IO request. - */ -#define SCU_MAX_SGL_ELEMENT_PAIRS ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2) - -/** * scic_sds_request_get_controller() - * * This macro will return the controller for this io request object diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 1f8773d..cb1adef 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -131,7 +131,6 @@ void scic_sds_smp_request_assign_buffers( scic_sds_smp_request_get_command_buffer(sci_req); sci_req->response_buffer = scic_sds_smp_request_get_response_buffer(sci_req); - sci_req->sgl_element_pair_buffer = NULL; if (sci_req->was_tag_assigned_by_user == false) { sci_req->task_context_buffer = diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 7dba40f..013af11 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -106,18 +106,6 @@ )) /** - * scic_sds_stp_request_get_sgl_element_buffer() - - * - * This macro returns the address of the sgl elment pairs in the io request - * memory buffer - */ -#define scic_sds_stp_request_get_sgl_element_buffer(memory) \ - ((struct scu_sgl_element_pair *)(\ - ((char *)(scic_sds_stp_request_get_task_context_buffer(memory))) \ - + sizeof(struct scu_task_context) \ - )) - -/** * * * This method return the memory space required for STP PIO requests. u32 @@ -128,8 +116,7 @@ u32 scic_sds_stp_request_get_object_size(void) + sizeof(struct host_to_dev_fis) + sizeof(struct dev_to_host_fis) + sizeof(struct scu_task_context) - + SMP_CACHE_BYTES - + sizeof(struct scu_sgl_element_pair) * SCU_MAX_SGL_ELEMENT_PAIRS; + + SMP_CACHE_BYTES; } void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) @@ -138,9 +125,6 @@ void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) sci_req->command_buffer = scic_sds_stp_request_get_h2d_reg_buffer(stp_req); sci_req->response_buffer = scic_sds_stp_request_get_response_buffer(stp_req); - sci_req->sgl_element_pair_buffer = scic_sds_stp_request_get_sgl_element_buffer(stp_req); - sci_req->sgl_element_pair_buffer = PTR_ALIGN(sci_req->sgl_element_pair_buffer, - sizeof(struct scu_sgl_element_pair)); if (sci_req->was_tag_assigned_by_user == false) { sci_req->task_context_buffer = diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index e01c2c9..9dd971a 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -200,14 +200,10 @@ static enum sci_status isci_io_request_build( /* build the common request object. For now, * we will let the core allocate the IO tag. */ - status = scic_io_request_construct( - &isci_host->sci, - sci_device, - SCI_CONTROLLER_INVALID_IO_TAG, - request, - request->sci_request_mem_ptr, - (struct scic_sds_request **)&request->sci_request_handle - ); + status = scic_io_request_construct(&isci_host->sci, sci_device, + SCI_CONTROLLER_INVALID_IO_TAG, + request, request->sci_req, + &request->sci_request_handle); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -277,8 +273,6 @@ static int isci_request_alloc_core( /* initialize the request object. */ spin_lock_init(&request->state_lock); - request->sci_request_mem_ptr = ((u8 *)request) + - sizeof(struct isci_request); request->request_daddr = handle; request->isci_host = isci_host; request->isci_device = isci_device; diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 9c97715..ddfbf71 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -53,10 +53,11 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#if !defined(_ISCI_REQUEST_H_) +#ifndef _ISCI_REQUEST_H_ #define _ISCI_REQUEST_H_ #include "isci.h" +#include "scic_sds_request.h" /** * struct isci_request_status - This enum defines the possible states of an I/O @@ -80,16 +81,8 @@ enum task_type { tmf_task = 1 }; -/** - * struct isci_request - This class represents the request object used to track - * IO, smp and TMF request internal. It wraps the SCIC request object. - * - * - */ struct isci_request { - struct scic_sds_request *sci_request_handle; - enum isci_request_status status; enum task_type ttype; unsigned short io_tag; @@ -105,7 +98,6 @@ struct isci_request { struct list_head completed_node; /* For use in the reqs_in_process list: */ struct list_head dev_node; - void *sci_request_mem_ptr; spinlock_t state_lock; dma_addr_t request_daddr; dma_addr_t zero_scatter_daddr; @@ -123,6 +115,7 @@ struct isci_request { * TMF was aborting is guaranteed to have completed. */ struct completion *io_request_completion; + struct scic_sds_request sci_req[0] ____cacheline_aligned; }; /** diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 12f2df9..7d5f793 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -298,14 +298,10 @@ static enum sci_status isci_task_request_build( goto out; /* let the core do it's construct. */ - status = scic_task_request_construct( - &isci_host->sci, - sci_device, - SCI_CONTROLLER_INVALID_IO_TAG, - request, - request->sci_request_mem_ptr, - &request->sci_request_handle - ); + status = scic_task_request_construct(&isci_host->sci, sci_device, + SCI_CONTROLLER_INVALID_IO_TAG, + request, &request->sci_req, + &request->sci_request_handle); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, -- cgit v0.10.2 From 26298264a5de6d46d6e872dfd4c5d14c3011666f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 7 May 2011 19:07:14 -0700 Subject: isci: move task context alignment from run-time to compile time Remove usage of PTR_ALIGN by arranging for the task context to be aligned by the compiler. Another step towards unifying isci_request and scic_sds_request. Once this is complete the task context in the request can likely be removed in favor of building the task directly to tc memory (see: scic_sds_controller_copy_task_context). It's not clear why this needs to be cacheline aligned if we just end up copying before submission... Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 189a799..baf69ed 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -125,31 +125,6 @@ )) /** - * scic_sds_ssp_request_get_task_context_buffer() - - * - * This macro returns the address of the task context buffer in the io request - * memory - */ -#define scic_sds_ssp_request_get_task_context_buffer(memory) \ - ((struct scu_task_context *)(\ - ((char *)(scic_sds_ssp_request_get_response_buffer(memory))) \ - + SSP_RESP_IU_MAX_SIZE \ - )) - -/** - * scic_sds_ssp_request_get_sgl_element_buffer() - - * - * This macro returns the address of the sgl elment pairs in the io request - * memory buffer - */ -#define scic_sds_ssp_request_get_sgl_element_buffer(memory) \ - ((struct scu_sgl_element_pair *)(\ - ((char *)(scic_sds_ssp_request_get_task_context_buffer(memory))) \ - + sizeof(struct scu_task_context) \ - )) - - -/** * scic_ssp_task_request_get_object_size() - * * This macro returns the sizeof of memory required to store an SSP Task @@ -185,24 +160,6 @@ )) /** - * scic_sds_ssp_task_request_get_task_context_buffer() - - * - * This macro returs the task context buffer for the SSP task request. - */ -#define scic_sds_ssp_task_request_get_task_context_buffer(memory) \ - ((struct scu_task_context *)(\ - ((char *)(scic_sds_ssp_task_request_get_response_buffer(memory))) \ - + SSP_RESP_IU_MAX_SIZE \ - )) - - - -/* - * **************************************************************************** - * * SCIC SDS IO REQUEST PRIVATE METHODS - * **************************************************************************** */ - -/** * * * This method returns the size required to store an SSP IO request object. u32 @@ -210,9 +167,7 @@ static u32 scic_sds_ssp_request_get_object_size(void) { return sizeof(struct scic_sds_request) - + scic_ssp_io_request_get_object_size() - + sizeof(struct scu_task_context) - + SMP_CACHE_BYTES; + + scic_ssp_io_request_get_object_size(); } /** @@ -328,13 +283,8 @@ static void scic_sds_ssp_io_request_assign_buffers( sci_req->response_buffer = scic_sds_ssp_request_get_response_buffer(sci_req); - if (sci_req->was_tag_assigned_by_user == false) { - sci_req->task_context_buffer = - scic_sds_ssp_request_get_task_context_buffer(sci_req); - sci_req->task_context_buffer = - PTR_ALIGN(sci_req->task_context_buffer, - SMP_CACHE_BYTES); - } + if (sci_req->was_tag_assigned_by_user == false) + sci_req->task_context_buffer = &sci_req->tc; } static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req) @@ -530,12 +480,8 @@ static void scic_sds_ssp_task_request_assign_buffers( sci_req->response_buffer = scic_sds_ssp_task_request_get_response_buffer(sci_req); - if (sci_req->was_tag_assigned_by_user == false) { - sci_req->task_context_buffer = - scic_sds_ssp_task_request_get_task_context_buffer(sci_req); - sci_req->task_context_buffer = - PTR_ALIGN(sci_req->task_context_buffer, SMP_CACHE_BYTES); - } + if (sci_req->was_tag_assigned_by_user == false) + sci_req->task_context_buffer = &sci_req->tc; } /** diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 83d737a..8f65814 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -184,6 +184,7 @@ struct scic_sds_request { void *command_buffer; void *response_buffer; struct scu_task_context *task_context_buffer; + struct scu_task_context tc ____cacheline_aligned; /* could be larger with sg chaining */ #define SCU_SGL_SIZE ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2) diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index cb1adef..53b1260 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -78,9 +78,7 @@ u32 scic_sds_smp_request_get_object_size(void) { return sizeof(struct scic_sds_request) + sizeof(struct smp_req) - + sizeof(struct smp_resp) - + sizeof(struct scu_task_context) - + SMP_CACHE_BYTES; + + sizeof(struct smp_resp); } /** @@ -102,29 +100,7 @@ u32 scic_sds_smp_request_get_object_size(void) (((char *)(scic_sds_smp_request_get_command_buffer(memory))) \ + sizeof(struct smp_req)) -/** - * scic_sds_smp_request_get_task_context_buffer() - - * - * This macro returs the task context buffer for the SMP request. - */ -#define scic_sds_smp_request_get_task_context_buffer(memory) \ - ((struct scu_task_context *)(\ - ((char *)(scic_sds_smp_request_get_response_buffer(memory))) \ - + sizeof(struct smp_resp) \ - )) - - - -/** - * This method build the remainder of the IO request object. - * @sci_req: This parameter specifies the request object being constructed. - * - * The scic_sds_general_request_construct() must be called before this call is - * valid. none - */ - -void scic_sds_smp_request_assign_buffers( - struct scic_sds_request *sci_req) +void scic_sds_smp_request_assign_buffers(struct scic_sds_request *sci_req) { /* Assign all of the buffer pointers */ sci_req->command_buffer = @@ -132,13 +108,8 @@ void scic_sds_smp_request_assign_buffers( sci_req->response_buffer = scic_sds_smp_request_get_response_buffer(sci_req); - if (sci_req->was_tag_assigned_by_user == false) { - sci_req->task_context_buffer = - scic_sds_smp_request_get_task_context_buffer(sci_req); - sci_req->task_context_buffer = - PTR_ALIGN(sci_req->task_context_buffer, SMP_CACHE_BYTES); - } - + if (sci_req->was_tag_assigned_by_user == false) + sci_req->task_context_buffer = &sci_req->tc; } /* diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 013af11..f213545 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -94,18 +94,6 @@ )) /** - * scic_sds_stp_request_get_task_context_buffer() - - * - * This macro returns the address of the task context buffer in the io request - * memory - */ -#define scic_sds_stp_request_get_task_context_buffer(memory) \ - ((struct scu_task_context *)(\ - ((char *)(scic_sds_stp_request_get_response_buffer(memory))) \ - + SSP_RESP_IU_MAX_SIZE \ - )) - -/** * * * This method return the memory space required for STP PIO requests. u32 @@ -114,9 +102,7 @@ u32 scic_sds_stp_request_get_object_size(void) { return sizeof(struct scic_sds_stp_request) + sizeof(struct host_to_dev_fis) - + sizeof(struct dev_to_host_fis) - + sizeof(struct scu_task_context) - + SMP_CACHE_BYTES; + + sizeof(struct dev_to_host_fis); } void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) @@ -126,12 +112,8 @@ void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) sci_req->command_buffer = scic_sds_stp_request_get_h2d_reg_buffer(stp_req); sci_req->response_buffer = scic_sds_stp_request_get_response_buffer(stp_req); - if (sci_req->was_tag_assigned_by_user == false) { - sci_req->task_context_buffer = - scic_sds_stp_request_get_task_context_buffer(stp_req); - sci_req->task_context_buffer = PTR_ALIGN(sci_req->task_context_buffer, - SMP_CACHE_BYTES); - } + if (sci_req->was_tag_assigned_by_user == false) + sci_req->task_context_buffer = &sci_req->tc; } /** -- cgit v0.10.2 From b7645818cff1536038c0b21407eefb6b9d5755e6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 May 2011 02:35:32 -0700 Subject: isci: make command/response iu explicit request object members Final elimination of the anonymous data at the end of the request structure. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h index 6ddf380..cb3667d 100644 --- a/drivers/scsi/isci/core/scic_io_request.h +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -104,14 +104,6 @@ typedef enum { /** - * scic_io_request_get_object_size() - This method simply returns the size - * required to build an SCI based IO request object. - * - * Return the size of the SCI IO request object. - */ -u32 scic_io_request_get_object_size(void); - -/** * scic_io_request_construct() - This method is called by the SCI user to * construct all SCI Core IO requests. Memory initialization and * functionality common to all IO request types is performed in this method. @@ -222,32 +214,6 @@ enum sci_status scic_io_request_construct_smp( u32 scic_request_get_controller_status( struct scic_sds_request *io_request); - - -/** - * scic_io_request_get_command_iu_address() - This method will return the - * address to the command information unit. - * @scic_io_request: This parameter specifies the handle to the io request - * object to be built. - * - * The address of the SSP/SMP command information unit. - */ -void *scic_io_request_get_command_iu_address( - struct scic_sds_request *scic_io_request); - -/** - * scic_io_request_get_response_iu_address() - This method will return the - * address to the response information unit. For an SSP request this buffer - * is only valid if the IO request is completed with the status - * SCI_FAILURE_IO_RESPONSE_VALID. - * @scic_io_request: This parameter specifies the handle to the io request - * object to be built. - * - * The address of the SSP/SMP response information unit. - */ -void *scic_io_request_get_response_iu_address( - struct scic_sds_request *scic_io_request); - /** * scic_io_request_get_io_tag() - This method will return the IO tag utilized * by the IO request. @@ -280,33 +246,6 @@ void scic_stp_io_request_set_ncq_tag( u16 ncq_tag); /** - * scic_stp_io_request_get_h2d_reg_address() - This method will return the - * address of the host to device register fis region for the io request - * object. - * @scic_io_request: This parameter specifies the handle to the io request - * object from which to get the host to device register fis buffer. - * - * The address of the host to device register fis buffer in the io request - * object. This function is only valid for SATA requests. - */ -void *scic_stp_io_request_get_h2d_reg_address( - struct scic_sds_request *scic_io_request); - -/** - * scic_stp_io_request_get_d2h_reg_address() - This method will return the - * address of the device to host register fis region for the io request - * object. - * @scic_io_request: This parameter specifies teh handle to the io request - * object from which to get the device to host register fis buffer. - * - * The address fo the device to host register fis ending the io request. This - * function is only valid for SATA requests. - */ -void *scic_stp_io_request_get_d2h_reg_address( - struct scic_sds_request *scic_io_request); - - -/** * scic_io_request_get_number_of_bytes_transferred() - This method will return * the number of bytes transferred from the SCU * @scic_io_request: This parameter specifies the handle to the io request diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index baf69ed..36c2b31 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -83,93 +83,6 @@ #define SCIC_SDS_IO_REQUEST_MINIMUM_TIMER_COUNT (0) #define SCIC_SDS_IO_REQUEST_MAXIMUM_TIMER_COUNT (0) -/* - * **************************************************************************** - * * SCIC SDS IO REQUEST MACROS - * **************************************************************************** */ - -/** - * scic_ssp_io_request_get_object_size() - - * - * This macro returns the sizeof memory required to store the an SSP IO - * request. This does not include the size of the SGL or SCU Task Context - * memory. - */ -#define scic_ssp_io_request_get_object_size() \ - (\ - sizeof(struct ssp_cmd_iu) \ - + SSP_RESP_IU_MAX_SIZE \ - ) - -/** - * scic_sds_ssp_request_get_command_buffer() - - * - * This macro returns the address of the ssp command buffer in the io request - * memory - */ -#define scic_sds_ssp_request_get_command_buffer(memory) \ - ((struct ssp_cmd_iu *)(\ - ((char *)(memory)) + sizeof(struct scic_sds_request) \ - )) - -/** - * scic_sds_ssp_request_get_response_buffer() - - * - * This macro returns the address of the ssp response buffer in the io request - * memory - */ -#define scic_sds_ssp_request_get_response_buffer(memory) \ - ((struct ssp_response_iu *)(\ - ((char *)(scic_sds_ssp_request_get_command_buffer(memory))) \ - + sizeof(struct ssp_cmd_iu) \ - )) - -/** - * scic_ssp_task_request_get_object_size() - - * - * This macro returns the sizeof of memory required to store an SSP Task - * request. This does not include the size of the SCU Task Context memory. - */ -#define scic_ssp_task_request_get_object_size() \ - (\ - sizeof(struct ssp_task_iu) \ - + SSP_RESP_IU_MAX_SIZE \ - ) - -/** - * scic_sds_ssp_task_request_get_command_buffer() - - * - * This macro returns the address of the ssp command buffer in the task request - * memory. Yes its the same as the above macro except for the name. - */ -#define scic_sds_ssp_task_request_get_command_buffer(memory) \ - ((struct ssp_task_iu *)(\ - ((char *)(memory)) + sizeof(struct scic_sds_request) \ - )) - -/** - * scic_sds_ssp_task_request_get_response_buffer() - - * - * This macro returns the address of the ssp response buffer in the task - * request memory. - */ -#define scic_sds_ssp_task_request_get_response_buffer(memory) \ - ((struct ssp_response_iu *)(\ - ((char *)(scic_sds_ssp_task_request_get_command_buffer(memory))) \ - + sizeof(struct ssp_task_iu) \ - )) - -/** - * - * - * This method returns the size required to store an SSP IO request object. u32 - */ -static u32 scic_sds_ssp_request_get_object_size(void) -{ - return sizeof(struct scic_sds_request) - + scic_ssp_io_request_get_object_size(); -} - /** * This method returns the sgl element pair for the specificed sgl_pair index. * @sci_req: This parameter specifies the IO request for which to retrieve @@ -268,21 +181,8 @@ void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) } } -/** - * This method build the remainder of the IO request object. - * @sci_req: This parameter specifies the request object being constructed. - * - * The scic_sds_general_request_construct() must be called before this call is - * valid. none - */ -static void scic_sds_ssp_io_request_assign_buffers( - struct scic_sds_request *sci_req) +static void scic_sds_ssp_io_request_assign_buffers(struct scic_sds_request *sci_req) { - sci_req->command_buffer = - scic_sds_ssp_request_get_command_buffer(sci_req); - sci_req->response_buffer = - scic_sds_ssp_request_get_response_buffer(sci_req); - if (sci_req->was_tag_assigned_by_user == false) sci_req->task_context_buffer = &sci_req->tc; } @@ -293,7 +193,7 @@ static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sc struct isci_request *ireq = sci_req->ireq; struct sas_task *task = isci_request_access_task(ireq); - cmd_iu = sci_req->command_buffer; + cmd_iu = &sci_req->ssp.cmd; memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8); cmd_iu->add_cdb_len = 0; @@ -315,7 +215,7 @@ static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci struct sas_task *task = isci_request_access_task(ireq); struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - task_iu = sci_req->command_buffer; + task_iu = &sci_req->ssp.tmf; memset(task_iu, 0, sizeof(struct ssp_task_iu)); @@ -411,7 +311,7 @@ static void scu_ssp_reqeust_construct_task_context( * SCU Task Context */ dma_addr = scic_io_request_get_dma_addr(sds_request, - sds_request->command_buffer); + &sds_request->ssp.cmd); task_context->command_iu_upper = upper_32_bits(dma_addr); task_context->command_iu_lower = lower_32_bits(dma_addr); @@ -421,7 +321,7 @@ static void scu_ssp_reqeust_construct_task_context( * SCU Task Context */ dma_addr = scic_io_request_get_dma_addr(sds_request, - sds_request->response_buffer); + &sds_request->ssp.rsp); task_context->response_iu_upper = upper_32_bits(dma_addr); task_context->response_iu_lower = lower_32_bits(dma_addr); @@ -464,22 +364,8 @@ static void scu_ssp_io_request_construct_task_context( scic_sds_request_build_sgl(sci_req); } - -/** - * This method will fill in the remainder of the io request object for SSP Task - * requests. - * @sci_req: - * - */ -static void scic_sds_ssp_task_request_assign_buffers( - struct scic_sds_request *sci_req) +static void scic_sds_ssp_task_request_assign_buffers(struct scic_sds_request *sci_req) { - /* Assign all of the buffer pointers */ - sci_req->command_buffer = - scic_sds_ssp_task_request_get_command_buffer(sci_req); - sci_req->response_buffer = - scic_sds_ssp_task_request_get_response_buffer(sci_req); - if (sci_req->was_tag_assigned_by_user == false) sci_req->task_context_buffer = &sci_req->tc; } @@ -589,19 +475,6 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, return status; } -u32 scic_io_request_get_object_size(void) -{ - u32 ssp_request_size; - u32 stp_request_size; - u32 smp_request_size; - - ssp_request_size = scic_sds_ssp_request_get_object_size(); - stp_request_size = scic_sds_stp_request_get_object_size(); - smp_request_size = scic_sds_smp_request_get_object_size(); - - return max(ssp_request_size, max(stp_request_size, smp_request_size)); -} - enum sci_status scic_io_request_construct_basic_ssp( struct scic_sds_request *sci_req) { @@ -712,21 +585,6 @@ u32 scic_request_get_controller_status( return sci_req->scu_status; } - -void *scic_io_request_get_command_iu_address( - struct scic_sds_request *sci_req) -{ - return sci_req->command_buffer; -} - - -void *scic_io_request_get_response_iu_address( - struct scic_sds_request *sci_req) -{ - return sci_req->response_buffer; -} - - #define SCU_TASK_CONTEXT_SRAM 0x200000 u32 scic_io_request_get_number_of_bytes_transferred( struct scic_sds_request *scic_sds_request) @@ -885,7 +743,7 @@ void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) struct isci_request *ireq = sci_req->ireq; struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - ssp_response = sci_req->response_buffer; + ssp_response = &sci_req->ssp.rsp; resp_buf = &isci_tmf->resp.resp_iu; @@ -1053,11 +911,11 @@ scic_sds_request_started_state_tc_completion_handler( * truly a failed request or a good request that just got * completed early. */ - struct ssp_response_iu *resp = sci_req->response_buffer; + struct ssp_response_iu *resp = &sci_req->ssp.rsp; ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - sci_swab32_cpy(sci_req->response_buffer, - sci_req->response_buffer, + sci_swab32_cpy(&sci_req->ssp.rsp, + &sci_req->ssp.rsp, word_cnt); if (resp->status == 0) { @@ -1078,8 +936,8 @@ scic_sds_request_started_state_tc_completion_handler( { ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - sci_swab32_cpy(sci_req->response_buffer, - sci_req->response_buffer, + sci_swab32_cpy(&sci_req->ssp.rsp, + &sci_req->ssp.rsp, word_cnt); scic_sds_request_set_status(sci_req, @@ -1094,7 +952,7 @@ scic_sds_request_started_state_tc_completion_handler( * guaranteed to be received before this completion status is * posted? */ - resp_iu = sci_req->response_buffer; + resp_iu = &sci_req->ssp.rsp; datapres = resp_iu->datapres; if ((datapres == 0x01) || (datapres == 0x02)) { @@ -1222,10 +1080,10 @@ scic_sds_request_started_state_frame_handler(struct scic_sds_request *sci_req, frame_index, (void **)&resp_iu); - sci_swab32_cpy(sci_req->response_buffer, + sci_swab32_cpy(&sci_req->ssp.rsp, resp_iu, word_cnt); - resp_iu = sci_req->response_buffer; + resp_iu = &sci_req->ssp.rsp; if ((resp_iu->datapres == 0x01) || (resp_iu->datapres == 0x02)) { @@ -1627,12 +1485,10 @@ scic_io_request_construct(struct scic_sds_controller *scic, else if ((dev->dev_type == SATA_DEV) || (dev->tproto & SAS_PROTOCOL_STP)) { scic_sds_stp_request_assign_buffers(sci_req); - memset(sci_req->command_buffer, - 0, - sizeof(struct host_to_dev_fis)); + memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd)); } else if (dev_is_expander(dev)) { scic_sds_smp_request_assign_buffers(sci_req); - memset(sci_req->command_buffer, 0, sizeof(struct smp_req)); + memset(&sci_req->smp.cmd, 0, sizeof(sci_req->smp.cmd)); } else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 8f65814..3f551ea 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -61,6 +61,7 @@ #include "scu_task_context.h" #include "scic_sds_stp_request.h" #include "scu_constants.h" +#include "sas.h" struct scic_sds_controller; struct scic_sds_remote_device; @@ -181,8 +182,6 @@ struct scic_sds_request { */ u32 post_context; - void *command_buffer; - void *response_buffer; struct scu_task_context *task_context_buffer; struct scu_task_context tc ____cacheline_aligned; @@ -232,9 +231,30 @@ struct scic_sds_request { */ u8 device_sequence; - struct { - struct scic_sds_stp_request req; - } stp; + union { + struct { + union { + struct ssp_cmd_iu cmd; + struct ssp_task_iu tmf; + }; + union { + struct ssp_response_iu rsp; + u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; + }; + } ssp; + + struct { + struct smp_req cmd; + struct smp_resp rsp; + } smp; + + struct { + struct scic_sds_stp_request req; + struct host_to_dev_fis cmd; + struct dev_to_host_fis rsp; + } stp; + }; + }; static inline struct scic_sds_request *to_sci_req(struct scic_sds_stp_request *stp_req) diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 53b1260..2b91120 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -69,45 +69,8 @@ static void scu_smp_request_construct_task_context( struct scic_sds_request *sci_req, struct smp_req *smp_req); -/** - * - * - * This method return the memory space required for STP PIO requests. u32 - */ -u32 scic_sds_smp_request_get_object_size(void) -{ - return sizeof(struct scic_sds_request) - + sizeof(struct smp_req) - + sizeof(struct smp_resp); -} - -/** - * scic_sds_smp_request_get_command_buffer() - - * - * This macro returns the address of the smp command buffer in the smp request - * memory. No need to cast to SMP request type. - */ -#define scic_sds_smp_request_get_command_buffer(memory) \ - (((char *)(memory)) + sizeof(struct scic_sds_request)) - -/** - * scic_sds_smp_request_get_response_buffer() - - * - * This macro returns the address of the smp response buffer in the smp request - * memory. - */ -#define scic_sds_smp_request_get_response_buffer(memory) \ - (((char *)(scic_sds_smp_request_get_command_buffer(memory))) \ - + sizeof(struct smp_req)) - void scic_sds_smp_request_assign_buffers(struct scic_sds_request *sci_req) { - /* Assign all of the buffer pointers */ - sci_req->command_buffer = - scic_sds_smp_request_get_command_buffer(sci_req); - sci_req->response_buffer = - scic_sds_smp_request_get_response_buffer(sci_req); - if (sci_req->was_tag_assigned_by_user == false) sci_req->task_context_buffer = &sci_req->tc; } @@ -135,7 +98,7 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32); /* byte swap the smp request. */ - sci_swab32_cpy(sci_req->command_buffer, smp_req, + sci_swab32_cpy(&sci_req->smp.cmd, smp_req, word_cnt); task_context = scic_sds_request_get_task_context(sci_req); @@ -185,9 +148,7 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, * 18h ~ 30h, protocol specific * since commandIU has been build by framework at this point, we just * copy the frist DWord from command IU to this location. */ - memcpy((void *)(&task_context->type.smp), - sci_req->command_buffer, - sizeof(u32)); + memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32)); /* * 40h @@ -228,8 +189,7 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, * Context command buffer should not contain command header. */ dma_addr = scic_io_request_get_dma_addr(sci_req, - (char *) - (sci_req->command_buffer) + + ((char *) &sci_req->smp.cmd) + sizeof(u32)); task_context->command_iu_upper = upper_32_bits(dma_addr); @@ -255,14 +215,12 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, * indicates successful processing of the TC response. */ static enum sci_status -scic_sds_smp_request_await_response_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) +scic_sds_smp_request_await_response_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) { enum sci_status status; void *frame_header; - struct smp_resp *rsp_hdr; - u8 *usr_smp_buf = sci_req->response_buffer; + struct smp_resp *rsp_hdr = &sci_req->smp.rsp; ssize_t word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); status = scic_sds_unsolicited_frame_control_get_header( @@ -271,9 +229,7 @@ scic_sds_smp_request_await_response_frame_handler( &frame_header); /* byte swap the header. */ - sci_swab32_cpy(usr_smp_buf, frame_header, word_cnt); - - rsp_hdr = (struct smp_resp *)usr_smp_buf; + sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); if (rsp_hdr->frame_type == SMP_RESPONSE) { void *smp_resp; @@ -286,7 +242,7 @@ scic_sds_smp_request_await_response_frame_handler( word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / sizeof(u32); - sci_swab32_cpy(usr_smp_buf + SMP_RESP_HDR_SZ, + sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, smp_resp, word_cnt); scic_sds_request_set_status( @@ -532,7 +488,7 @@ enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) ); /* Construct the SMP SCU Task Context */ - memcpy(smp_req, sci_req->command_buffer, sizeof(*smp_req)); + memcpy(smp_req, &sci_req->smp.cmd, sizeof(*smp_req)); /* * Look at the SMP requests' header fields; for certain SAS 1.x SMP diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index f213545..c7a8931 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -70,48 +70,8 @@ #include "scu_event_codes.h" #include "scu_task_context.h" -/** - * scic_sds_stp_request_get_h2d_reg_buffer() - - * - * This macro returns the address of the stp h2d reg fis buffer in the io - * request memory - */ -#define scic_sds_stp_request_get_h2d_reg_buffer(memory) \ - ((struct host_to_dev_fis *)(\ - ((char *)(memory)) + sizeof(struct scic_sds_stp_request) \ - )) - -/** - * scic_sds_stp_request_get_response_buffer() - - * - * This macro returns the address of the ssp response iu buffer in the io - * request memory - */ -#define scic_sds_stp_request_get_response_buffer(memory) \ - ((struct dev_to_host_fis *)(\ - ((char *)(scic_sds_stp_request_get_h2d_reg_buffer(memory))) \ - + sizeof(struct host_to_dev_fis) \ - )) - -/** - * - * - * This method return the memory space required for STP PIO requests. u32 - */ -u32 scic_sds_stp_request_get_object_size(void) -{ - return sizeof(struct scic_sds_stp_request) - + sizeof(struct host_to_dev_fis) - + sizeof(struct dev_to_host_fis); -} - void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) { - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - sci_req->command_buffer = scic_sds_stp_request_get_h2d_reg_buffer(stp_req); - sci_req->response_buffer = scic_sds_stp_request_get_response_buffer(stp_req); - if (sci_req->was_tag_assigned_by_user == false) sci_req->task_context_buffer = &sci_req->tc; } @@ -129,7 +89,7 @@ void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) * determine what is common for SSP/SMP/STP task context structures. */ static void scu_sata_reqeust_construct_task_context( - struct scic_sds_request *sds_request, + struct scic_sds_request *sci_req, struct scu_task_context *task_context) { dma_addr_t dma_addr; @@ -137,9 +97,9 @@ static void scu_sata_reqeust_construct_task_context( struct scic_sds_remote_device *target_device; struct scic_sds_port *target_port; - controller = scic_sds_request_get_controller(sds_request); - target_device = scic_sds_request_get_device(sds_request); - target_port = scic_sds_request_get_port(sds_request); + controller = scic_sds_request_get_controller(sci_req); + target_device = scic_sds_request_get_device(sci_req); + target_port = scic_sds_request_get_port(sci_req); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -155,7 +115,7 @@ static void scu_sata_reqeust_construct_task_context( task_context->context_type = SCU_TASK_CONTEXT_TYPE; task_context->remote_node_index = - scic_sds_remote_device_get_index(sds_request->target_device); + scic_sds_remote_device_get_index(sci_req->target_device); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -172,21 +132,21 @@ static void scu_sata_reqeust_construct_task_context( (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); /* Set the first word of the H2D REG FIS */ - task_context->type.words[0] = *(u32 *)sds_request->command_buffer; + task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd; - if (sds_request->was_tag_assigned_by_user) { + if (sci_req->was_tag_assigned_by_user) { /* * Build the task context now since we have already read * the data */ - sds_request->post_context = + sci_req->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | (scic_sds_controller_get_protocol_engine_group( controller) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | (scic_sds_port_get_index(target_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sds_request->io_tag)); + scic_sds_io_tag_get_index(sci_req->io_tag)); } else { /* * Build the task context now since we have already read @@ -194,7 +154,7 @@ static void scu_sata_reqeust_construct_task_context( * I/O tag index is not assigned because we have to wait * until we get a TCi. */ - sds_request->post_context = + sci_req->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | (scic_sds_controller_get_protocol_engine_group( controller) << @@ -208,11 +168,9 @@ static void scu_sata_reqeust_construct_task_context( * Context. We must offset the command buffer by 4 bytes because the * first 4 bytes are transfered in the body of the TC. */ - dma_addr = - scic_io_request_get_dma_addr(sds_request, - (char *)sds_request-> - command_buffer + - sizeof(u32)); + dma_addr = scic_io_request_get_dma_addr(sci_req, + ((char *) &sci_req->stp.cmd) + + sizeof(u32)); task_context->command_iu_upper = upper_32_bits(dma_addr); task_context->command_iu_lower = lower_32_bits(dma_addr); @@ -334,21 +292,6 @@ void scic_stp_io_request_set_ncq_tag( req->task_context_buffer->type.stp.ncq_tag = ncq_tag; } - -void *scic_stp_io_request_get_h2d_reg_address( - struct scic_sds_request *req) -{ - return req->command_buffer; -} - - -void *scic_stp_io_request_get_d2h_reg_address(struct scic_sds_request *sci_req) -{ - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - return &stp_req->d2h_reg_fis; -} - /** * * @sci_req: @@ -478,7 +421,7 @@ static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, frame_header, frame_buffer); @@ -830,11 +773,11 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct /* ending_status: 4th byte in the 3rd dword */ stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; - scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, frame_header, frame_buffer); - stp_req->d2h_reg_fis.status = stp_req->type.pio.ending_status; + sci_req->stp.rsp.status = stp_req->type.pio.ending_status; /* The next state is dependent on whether the * request was PIO Data-in or Data out @@ -873,7 +816,7 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + scic_sds_controller_copy_sata_response(&sci_req->stp.req, frame_header, frame_buffer); @@ -1220,7 +1163,6 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct sc u32 frame_index) { struct scic_sds_controller *scic = sci_req->owning_controller; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; struct dev_to_host_fis *frame_header; enum sci_status status; u32 *frame_buffer; @@ -1235,7 +1177,7 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct sc frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, frame_header, frame_buffer); } @@ -1249,7 +1191,6 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi struct scic_sds_request *sci_req, u32 completion_code) { - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; enum sci_status status = SCI_SUCCESS; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { @@ -1263,7 +1204,7 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi /* * We must check ther response buffer to see if the D2H Register FIS was * received before we got the TC completion. */ - if (stp_req->d2h_reg_fis.fis_type == FIS_REGD2H) { + if (sci_req->stp.rsp.fis_type == FIS_REGD2H) { scic_sds_remote_device_suspend(sci_req->target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); @@ -1523,7 +1464,7 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&stp_req->d2h_reg_fis, + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, frame_header, frame_buffer); @@ -1595,7 +1536,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet enum sci_status status; /* Clear the SRST bit */ - h2d_fis = scic_stp_io_request_get_h2d_reg_address(sci_req); + h2d_fis = &sci_req->stp.cmd; h2d_fis->control = 0; /* Clear the TC control bit */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h index 6d02030..f5434f1 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_request.h @@ -60,8 +60,6 @@ #include struct scic_sds_stp_request { - struct dev_to_host_fis d2h_reg_fis; - union { u32 ncq; diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index cdd99304..4d0ee7b 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -433,7 +433,7 @@ int isci_host_init(struct isci_host *isci_host) * when trying to convert virtual addresses to physical addresses */ isci_host->dma_pool_alloc_size = sizeof(struct isci_request) + - scic_io_request_get_object_size(); + sizeof(struct scic_sds_request); isci_host->dma_pool = dmam_pool_create(DRV_NAME, &isci_host->pdev->dev, isci_host->dma_pool_alloc_size, SLAB_HWCACHE_ALIGN, 0); diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 9dd971a..a5b9b22 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -126,7 +126,6 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) enum sci_status status = SCI_FAILURE; struct sas_task *task = isci_request_access_task(ireq); struct scic_sds_request *sci_req = ireq->sci_request_handle; - void *cmd_iu = sci_req->command_buffer; dev_dbg(&ireq->isci_host->pdev->dev, "%s: request = %p\n", __func__, ireq); @@ -138,7 +137,7 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) /* copy the smp_command to the address; */ sg_copy_to_buffer(&task->smp_task.smp_req, 1, - (char *)cmd_iu, + &sci_req->smp.cmd, sizeof(struct smp_req)); status = scic_io_request_construct_smp(sci_req); @@ -998,25 +997,15 @@ void isci_request_io_request_complete( task); if (sas_protocol_ata(task->task_proto)) { - resp_buf - = scic_stp_io_request_get_d2h_reg_address( - request->sci_request_handle - ); + resp_buf = &request->sci_request_handle->stp.rsp; isci_request_process_stp_response(task, - resp_buf - ); - + resp_buf); } else if (SAS_PROTOCOL_SSP == task->task_proto) { /* crack the iu response buffer. */ - resp_iu - = scic_io_request_get_response_iu_address( - request->sci_request_handle - ); - + resp_iu = &request->sci_request_handle->ssp.rsp; isci_request_process_response_iu(task, resp_iu, - &isci_host->pdev->dev - ); + &isci_host->pdev->dev); } else if (SAS_PROTOCOL_SMP == task->task_proto) { @@ -1045,11 +1034,7 @@ void isci_request_io_request_complete( request->complete_in_target = true; if (task->task_proto == SAS_PROTOCOL_SMP) { - - u8 *command_iu_address - = scic_io_request_get_command_iu_address( - request->sci_request_handle - ); + void *rsp = &request->sci_request_handle->smp.rsp; dev_dbg(&isci_host->pdev->dev, "%s: SMP protocol completion\n", @@ -1057,9 +1042,7 @@ void isci_request_io_request_complete( sg_copy_from_buffer( &task->smp_task.smp_resp, 1, - command_iu_address - + sizeof(struct smp_req), - sizeof(struct smp_resp)); + rsp, sizeof(struct smp_resp)); } else if (completion_status == SCI_IO_SUCCESS_IO_DONE_EARLY) { diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index a08fcf5..578b1c5 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -71,24 +71,17 @@ */ struct host_to_dev_fis *isci_sata_task_to_fis_copy(struct sas_task *task) { - struct isci_request *request = task->lldd_task; - struct host_to_dev_fis *register_fis = - scic_stp_io_request_get_h2d_reg_address( - request->sci_request_handle - ); - - memcpy( - (u8 *)register_fis, - (u8 *)&task->ata_task.fis, - sizeof(struct host_to_dev_fis) - ); + struct isci_request *ireq = task->lldd_task; + struct host_to_dev_fis *fis = &ireq->sci_request_handle->stp.cmd; + + memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); if (!task->ata_task.device_control_reg_update) - register_fis->flags |= 0x80; + fis->flags |= 0x80; - register_fis->flags &= 0xF0; + fis->flags &= 0xF0; - return register_fis; + return fis; } /** @@ -161,36 +154,32 @@ void isci_request_process_stp_response(struct sas_task *task, ts->resp = SAS_TASK_COMPLETE; } -enum sci_status isci_sata_management_task_request_build( - struct isci_request *isci_request) +enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) { + struct scic_sds_request *sci_req = ireq->sci_request_handle; struct isci_tmf *isci_tmf; enum sci_status status; - if (tmf_task != isci_request->ttype) + if (tmf_task != ireq->ttype) return SCI_FAILURE; - isci_tmf = isci_request_access_tmf(isci_request); + isci_tmf = isci_request_access_tmf(ireq); switch (isci_tmf->tmf_code) { case isci_tmf_sata_srst_high: - case isci_tmf_sata_srst_low: - { - struct host_to_dev_fis *register_fis = - scic_stp_io_request_get_h2d_reg_address( - isci_request->sci_request_handle - ); - - memset(register_fis, 0, sizeof(*register_fis)); - - register_fis->fis_type = 0x27; - register_fis->flags &= ~0x80; - register_fis->flags &= 0xF0; + case isci_tmf_sata_srst_low: { + struct host_to_dev_fis *fis = &sci_req->stp.cmd; + + memset(fis, 0, sizeof(*fis)); + + fis->fis_type = 0x27; + fis->flags &= ~0x80; + fis->flags &= 0xF0; if (isci_tmf->tmf_code == isci_tmf_sata_srst_high) - register_fis->control |= ATA_SRST; + fis->control |= ATA_SRST; else - register_fis->control &= ~ATA_SRST; + fis->control &= ~ATA_SRST; break; } /* other management commnd go here... */ @@ -202,7 +191,7 @@ enum sci_status isci_sata_management_task_request_build( * based on the h2d fis. */ status = scic_task_request_construct_sata( - isci_request->sci_request_handle + ireq->sci_request_handle ); return status; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 7d5f793..492faee 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1431,7 +1431,6 @@ isci_task_request_complete(struct isci_host *ihost, struct isci_tmf *tmf = isci_request_access_tmf(ireq); struct completion *tmf_complete; struct scic_sds_request *sci_req = ireq->sci_request_handle; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; dev_dbg(&ihost->pdev->dev, "%s: request = %p, status=%d\n", @@ -1444,11 +1443,11 @@ isci_task_request_complete(struct isci_host *ihost, if (tmf->proto == SAS_PROTOCOL_SSP) { memcpy(&tmf->resp.resp_iu, - sci_req->response_buffer, + &sci_req->ssp.rsp, SSP_RESP_IU_MAX_SIZE); } else if (tmf->proto == SAS_PROTOCOL_SATA) { memcpy(&tmf->resp.d2h_fis, - &stp_req->d2h_reg_fis, + &sci_req->stp.rsp, sizeof(struct dev_to_host_fis)); } -- cgit v0.10.2 From 67ea838d17acdad3331aeae848683c768df96aaa Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 May 2011 11:47:15 -0700 Subject: isci: unify request data structures Make scic_sds_request a proper member of isci_request. Also let's us get rid of the dma pool object size tracking since we now know that all requests are sizeof(isci_request). While cleaning up the construct routine incidentally replaced SCI_FIELD_OFFSET with offsetof. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c index 0c75d14..4e60d55 100644 --- a/drivers/scsi/isci/core/sci_util.c +++ b/drivers/scsi/isci/core/sci_util.c @@ -59,14 +59,14 @@ void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) { - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); dma_addr_t offset; BUG_ON(phys_addr < ireq->request_daddr); offset = phys_addr - ireq->request_daddr; - BUG_ON(offset >= ireq->request_alloc_size); + BUG_ON(offset >= sizeof(*ireq)); return (char *)ireq + offset; } @@ -74,14 +74,13 @@ void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t ph dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sds_request, void *virt_addr) { - struct isci_request *isci_request = sds_request->ireq; + struct isci_request *isci_request = sci_req_to_ireq(sds_request); char *requested_addr = (char *)virt_addr; char *base_addr = (char *)isci_request; BUG_ON(requested_addr < base_addr); - BUG_ON((requested_addr - base_addr) >= - isci_request->request_alloc_size); + BUG_ON((requested_addr - base_addr) >= sizeof(*isci_request)); return isci_request->request_daddr + (requested_addr - base_addr); } diff --git a/drivers/scsi/isci/core/sci_util.h b/drivers/scsi/isci/core/sci_util.h index 4e9c318..0f9dd0f 100644 --- a/drivers/scsi/isci/core/sci_util.h +++ b/drivers/scsi/isci/core/sci_util.h @@ -66,9 +66,6 @@ | ((char_buffer)[3]) \ ) -#define SCI_FIELD_OFFSET(type, field) ((unsigned long)&(((type *)0)->field)) - - #define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \ ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h index cb3667d..f7c6d42 100644 --- a/drivers/scsi/isci/core/scic_io_request.h +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -102,41 +102,10 @@ typedef enum { } SCIC_TRANSPORT_PROTOCOL; - -/** - * scic_io_request_construct() - This method is called by the SCI user to - * construct all SCI Core IO requests. Memory initialization and - * functionality common to all IO request types is performed in this method. - * @scic_controller: the handle to the core controller object for which to - * build an IO request. - * @scic_remote_device: the handle to the core remote device object for which - * to build an IO request. - * @io_tag: This parameter specifies the IO tag to be associated with this - * request. If SCI_CONTROLLER_INVALID_IO_TAG is passed, then a copy of the - * request is built internally. The request will be copied into the actual - * controller request memory when the IO tag is allocated internally during - * the scic_controller_start_io() method. - * @user_io_request_object: This parameter specifies the user IO request to be - * utilized during IO construction. This IO pointer will become the - * associated object for the core IO request object. - * @scic_io_request_memory: This parameter specifies the memory location to be - * utilized when building the core request. - * @new_scic_io_request_handle: This parameter specifies a pointer to the - * handle the core will expect in further interactions with the core IO - * request object. - * - * The SCI core implementation will create an association between the user IO - * request object and the core IO request object. Indicate if the controller - * successfully built the IO request. SCI_SUCCESS This value is returned if the - * IO request was successfully built. - */ enum sci_status scic_io_request_construct( struct scic_sds_controller *scic_controller, struct scic_sds_remote_device *scic_remote_device, - u16 io_tag, - void *user_io_request_object, - struct scic_sds_request *scic_io_request_memory, - struct scic_sds_request **new_scic_io_request_handle); + u16 io_tag, struct scic_sds_request *sci_req); /** * scic_io_request_construct_basic_ssp() - This method is called by the SCI diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 4179bdf3..852b7d5 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -1572,7 +1572,7 @@ void scic_sds_controller_copy_task_context( memcpy(task_context_buffer, sci_req->task_context_buffer, - SCI_FIELD_OFFSET(struct scu_task_context, sgl_snapshot_ac)); + offsetof(struct scu_task_context, sgl_snapshot_ac)); /* * Now that the soft copy of the TC has been copied into the TC diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 36c2b31..50dd19b 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -117,7 +117,7 @@ static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( */ void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) { - struct isci_request *isci_request = sds_request->ireq; + struct isci_request *isci_request = sci_req_to_ireq(sds_request); struct isci_host *isci_host = isci_request->isci_host; struct sas_task *task = isci_request_access_task(isci_request); struct scatterlist *sg = NULL; @@ -190,7 +190,7 @@ static void scic_sds_ssp_io_request_assign_buffers(struct scic_sds_request *sci_ static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req) { struct ssp_cmd_iu *cmd_iu; - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); cmd_iu = &sci_req->ssp.cmd; @@ -211,7 +211,7 @@ static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sc static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci_req) { struct ssp_task_iu *task_iu; - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); @@ -429,7 +429,7 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, bool copy) { enum sci_status status = SCI_SUCCESS; - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); /* check for management protocols */ @@ -478,7 +478,7 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, enum sci_status scic_io_request_construct_basic_ssp( struct scic_sds_request *sci_req) { - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); sci_req->protocol = SCIC_SSP_PROTOCOL; @@ -519,7 +519,7 @@ enum sci_status scic_io_request_construct_basic_sata( enum sci_status status; struct scic_sds_stp_request *stp_req; bool copy = false; - struct isci_request *isci_request = sci_req->ireq; + struct isci_request *isci_request = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(isci_request); stp_req = &sci_req->stp.req; @@ -540,11 +540,10 @@ enum sci_status scic_io_request_construct_basic_sata( } -enum sci_status scic_task_request_construct_sata( - struct scic_sds_request *sci_req) +enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req) { enum sci_status status = SCI_SUCCESS; - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); /* check for management protocols */ if (ireq->ttype == tmf_task) { @@ -740,7 +739,7 @@ void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) void *resp_buf; u32 len; struct ssp_response_iu *ssp_response; - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); ssp_response = &sci_req->ssp.rsp; @@ -1342,7 +1341,7 @@ static void scic_sds_request_completed_state_enter(void *object) struct scic_sds_controller *scic = scic_sds_request_get_controller(sci_req); struct isci_host *ihost = scic_to_ihost(scic); - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); SET_STATE_HANDLER(sci_req, scic_sds_request_state_handler_table, @@ -1424,16 +1423,13 @@ static const struct sci_base_state scic_sds_request_state_table[] = { static void scic_sds_general_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - u16 io_tag, - void *user_io_request_object, - struct scic_sds_request *sci_req) + u16 io_tag, struct scic_sds_request *sci_req) { sci_base_state_machine_construct(&sci_req->state_machine, sci_req, scic_sds_request_state_table, SCI_BASE_REQUEST_STATE_INITIAL); sci_base_state_machine_start(&sci_req->state_machine); sci_req->io_tag = io_tag; - sci_req->user_request = user_io_request_object; sci_req->owning_controller = scic; sci_req->target_device = sci_dev; sci_req->has_started_substate_machine = false; @@ -1461,20 +1457,13 @@ static void scic_sds_general_request_construct(struct scic_sds_controller *scic, enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - u16 io_tag, - void *user_req, - struct scic_sds_request *sci_req, - struct scic_sds_request **new_sci_req) + u16 io_tag, struct scic_sds_request *sci_req) { struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, - sci_dev, - io_tag, - user_req, - sci_req); + scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) @@ -1493,10 +1482,8 @@ scic_io_request_construct(struct scic_sds_controller *scic, status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; if (status == SCI_SUCCESS) { - memset(sci_req->task_context_buffer, - 0, - SCI_FIELD_OFFSET(struct scu_task_context, sgl_pair_ab)); - *new_sci_req = sci_req; + memset(sci_req->task_context_buffer, 0, + offsetof(struct scu_task_context, sgl_pair_ab)); } return status; @@ -1504,18 +1491,13 @@ scic_io_request_construct(struct scic_sds_controller *scic, enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - u16 io_tag, - void *user_io_request_object, - struct scic_sds_request *sci_req, - struct scic_sds_request **new_sci_req) + u16 io_tag, struct scic_sds_request *sci_req) { struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, io_tag, - user_io_request_object, - sci_req); + scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); if (dev->dev_type == SAS_END_DEV) { scic_sds_ssp_task_request_assign_buffers(sci_req); @@ -1537,7 +1519,6 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, if (status == SCI_SUCCESS) { sci_req->is_task_management_request = true; memset(sci_req->task_context_buffer, 0, sizeof(struct scu_task_context)); - *new_sci_req = sci_req; } return status; diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 3f551ea..1dd98aa 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -113,26 +113,12 @@ enum scic_sds_smp_request_started_substates { SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, }; -struct isci_request; -/** - * struct scic_sds_request - This structure contains or references all of - * the data necessary to process a task management or normal IO request. - * - * - */ struct scic_sds_request { /** - * The field specifies that the peer object for the request object. - */ - struct isci_request *ireq; - - /** * This field contains the information for the base request state machine. */ struct sci_base_state_machine state_machine; - void *user_request; - /** * This field simply points to the controller to which this IO request * is associated. diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index c7a8931..2677393 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -627,7 +627,7 @@ scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *s int total_len = len; sci_req = to_sci_req(stp_req); - ireq = scic_sds_request_get_user_request(sci_req); + ireq = sci_req_to_ireq(sci_req); task = isci_request_access_task(ireq); src_addr = data_buf; @@ -737,7 +737,7 @@ static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct { struct scic_sds_controller *scic = sci_req->owning_controller; struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); struct dev_to_host_fis *frame_header; enum sci_status status; diff --git a/drivers/scsi/isci/core/scic_task_request.h b/drivers/scsi/isci/core/scic_task_request.h index 7e6d20a..98cfaa9 100644 --- a/drivers/scsi/isci/core/scic_task_request.h +++ b/drivers/scsi/isci/core/scic_task_request.h @@ -72,44 +72,10 @@ struct scic_sds_remote_device; struct scic_sds_controller; -/** - * scic_task_request_construct() - This method is called by the SCI user to - * construct all SCI Core task management requests, regardless of protocol. - * Memory initialization and functionality common to all task request types - * is performed in this method. - * @scic_controller: the handle to the core controller object for which to - * build the task managmement request. - * @scic_remote_device: the handle to the core remote device object for which - * to build the task management request. passed, then a copy of the request - * is built internally. The request will be copied into the actual - * controller request memory when the task is allocated internally during - * the scic_controller_start_task() method. - * @io_tag: This parameter specifies the IO tag to be associated with this - * request. If SCI_CONTROLLER_INVALID_IO_TAG is passed, then a copy of the - * request is built internally. The request will be copied into the actual - * controller request memory when the IO tag is allocated internally during - * the scic_controller_start_io() method. - * @user_task_request_object: This parameter specifies the user task request to - * be utilized during construction. This task pointer will become the - * associated object for the core task request object. - * @scic_task_request_memory: This parameter specifies the memory location to - * be utilized when building the core request. - * @new_scic_task_request_handle: This parameter specifies a pointer to the - * handle the core will expect in further interactions with the core task - * request object. - * - * The SCI core implementation will create an association between the user task - * request object and the core task request object. Indicate if the controller - * successfully built the task request. SCI_SUCCESS This value is returned if - * the task request was successfully built. - */ enum sci_status scic_task_request_construct( struct scic_sds_controller *scic_controller, struct scic_sds_remote_device *scic_remote_device, - u16 io_tag, - void *user_task_request_object, - void *scic_task_request_memory, - struct scic_sds_request **new_scic_task_request_handle); + u16 io_tag, struct scic_sds_request *sci_req); /** * scic_task_request_construct_ssp() - This method is called by the SCI user to diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 4d0ee7b..271a7e1 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -428,14 +428,8 @@ int isci_host_init(struct isci_host *isci_host) if (err) return err; - /* - * keep the pool alloc size around, will use it for a bounds checking - * when trying to convert virtual addresses to physical addresses - */ - isci_host->dma_pool_alloc_size = sizeof(struct isci_request) + - sizeof(struct scic_sds_request); isci_host->dma_pool = dmam_pool_create(DRV_NAME, &isci_host->pdev->dev, - isci_host->dma_pool_alloc_size, + sizeof(struct isci_request), SLAB_HWCACHE_ALIGN, 0); if (!isci_host->dma_pool) diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 5a414c3..afa41e8 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -82,7 +82,6 @@ struct isci_host { struct list_head timers; void *core_ctrl_memory; struct dma_pool *dma_pool; - unsigned int dma_pool_alloc_size; struct isci_phy phys[SCI_MAX_PHYS]; struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ struct sas_ha_struct sas_ha; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index a441c23..8b1ef19 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -473,7 +473,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic struct sci_base_state_machine *sm = &sci_dev->state_machine; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_port *sci_port = sci_dev->owning_port; - struct isci_request *ireq = sci_req->ireq; + struct isci_request *ireq = sci_req_to_ireq(sci_req); enum sci_status status; switch (state) { diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index a5b9b22..4961ee3 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -73,9 +73,7 @@ static enum sci_status isci_request_ssp_request_construct( "%s: request = %p\n", __func__, request); - status = scic_io_request_construct_basic_ssp( - request->sci_request_handle - ); + status = scic_io_request_construct_basic_ssp(&request->sci); return status; } @@ -96,9 +94,7 @@ static enum sci_status isci_request_stp_request_construct( */ register_fis = isci_sata_task_to_fis_copy(task); - status = scic_io_request_construct_basic_sata( - request->sci_request_handle - ); + status = scic_io_request_construct_basic_sata(&request->sci); /* Set the ncq tag in the fis, from the queue * command in the task. @@ -125,7 +121,7 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) { enum sci_status status = SCI_FAILURE; struct sas_task *task = isci_request_access_task(ireq); - struct scic_sds_request *sci_req = ireq->sci_request_handle; + struct scic_sds_request *sci_req = &ireq->sci; dev_dbg(&ireq->isci_host->pdev->dev, "%s: request = %p\n", __func__, ireq); @@ -201,8 +197,7 @@ static enum sci_status isci_io_request_build( */ status = scic_io_request_construct(&isci_host->sci, sci_device, SCI_CONTROLLER_INVALID_IO_TAG, - request, request->sci_req, - &request->sci_request_handle); + &request->sci); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -211,8 +206,6 @@ static enum sci_status isci_io_request_build( return SCI_FAILURE; } - request->sci_request_handle->ireq = request; - switch (task->task_proto) { case SAS_PROTOCOL_SMP: status = isci_smp_request_build(request); @@ -276,8 +269,8 @@ static int isci_request_alloc_core( request->isci_host = isci_host; request->isci_device = isci_device; request->io_request_completion = NULL; + request->terminated = false; - request->request_alloc_size = isci_host->dma_pool_alloc_size; request->num_sg_entries = 0; request->complete_in_target = false; @@ -381,80 +374,74 @@ int isci_request_execute( goto out; status = isci_io_request_build(isci_host, request, isci_device); - if (status == SCI_SUCCESS) { - - spin_lock_irqsave(&isci_host->scic_lock, flags); - - /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io( - &isci_host->sci, - sci_device, - request->sci_request_handle, - SCI_CONTROLLER_INVALID_IO_TAG - ); - - if (status == SCI_SUCCESS || - status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - - /* Either I/O started OK, or the core has signaled that - * the device needs a target reset. - * - * In either case, hold onto the I/O for later. - * - * Update it's status and add it to the list in the - * remote device object. - */ - isci_request_change_state(request, started); - list_add(&request->dev_node, - &isci_device->reqs_in_process); - - if (status == SCI_SUCCESS) { - /* Save the tag for possible task mgmt later. */ - request->io_tag = scic_io_request_get_io_tag( - request->sci_request_handle); - } else { - /* The request did not really start in the - * hardware, so clear the request handle - * here so no terminations will be done. - */ - request->sci_request_handle = NULL; - } + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: request_construct failed - status = 0x%x\n", + __func__, + status); + goto out; + } - } else - dev_warn(&isci_host->pdev->dev, - "%s: failed request start (0x%x)\n", - __func__, status); + spin_lock_irqsave(&isci_host->scic_lock, flags); + /* send the request, let the core assign the IO TAG. */ + status = scic_controller_start_io(&isci_host->sci, sci_device, + &request->sci, + SCI_CONTROLLER_INVALID_IO_TAG); + if (status != SCI_SUCCESS && + status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + dev_warn(&isci_host->pdev->dev, + "%s: failed request start (0x%x)\n", + __func__, status); spin_unlock_irqrestore(&isci_host->scic_lock, flags); + goto out; + } - if (status == - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - /* Signal libsas that we need the SCSI error - * handler thread to work on this I/O and that - * we want a device reset. - */ - spin_lock_irqsave(&task->task_state_lock, flags); - task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; - spin_unlock_irqrestore(&task->task_state_lock, flags); - - /* Cause this task to be scheduled in the SCSI error - * handler thread. - */ - isci_execpath_callback(isci_host, task, - sas_task_abort); - - /* Change the status, since we are holding - * the I/O until it is managed by the SCSI - * error handler. - */ - status = SCI_SUCCESS; - } + /* Either I/O started OK, or the core has signaled that + * the device needs a target reset. + * + * In either case, hold onto the I/O for later. + * + * Update it's status and add it to the list in the + * remote device object. + */ + isci_request_change_state(request, started); + list_add(&request->dev_node, &isci_device->reqs_in_process); - } else - dev_warn(&isci_host->pdev->dev, - "%s: request_construct failed - status = 0x%x\n", - __func__, - status); + if (status == SCI_SUCCESS) { + /* Save the tag for possible task mgmt later. */ + request->io_tag = scic_io_request_get_io_tag(&request->sci); + } else { + /* The request did not really start in the + * hardware, so clear the request handle + * here so no terminations will be done. + */ + request->terminated = true; + } + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + if (status == + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* Signal libsas that we need the SCSI error + * handler thread to work on this I/O and that + * we want a device reset. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Cause this task to be scheduled in the SCSI error + * handler thread. + */ + isci_execpath_callback(isci_host, task, + sas_task_abort); + + /* Change the status, since we are holding + * the I/O until it is managed by the SCSI + * error handler. + */ + status = SCI_SUCCESS; + } out: if (status != SCI_SUCCESS) { @@ -554,9 +541,7 @@ static void isci_request_handle_controller_specific_errors( { unsigned int cstatus; - cstatus = scic_request_get_controller_status( - request->sci_request_handle - ); + cstatus = scic_request_get_controller_status(&request->sci); dev_dbg(&request->isci_host->pdev->dev, "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR " @@ -997,13 +982,13 @@ void isci_request_io_request_complete( task); if (sas_protocol_ata(task->task_proto)) { - resp_buf = &request->sci_request_handle->stp.rsp; + resp_buf = &request->sci.stp.rsp; isci_request_process_stp_response(task, resp_buf); } else if (SAS_PROTOCOL_SSP == task->task_proto) { /* crack the iu response buffer. */ - resp_iu = &request->sci_request_handle->ssp.rsp; + resp_iu = &request->sci.ssp.rsp; isci_request_process_response_iu(task, resp_iu, &isci_host->pdev->dev); @@ -1034,7 +1019,7 @@ void isci_request_io_request_complete( request->complete_in_target = true; if (task->task_proto == SAS_PROTOCOL_SMP) { - void *rsp = &request->sci_request_handle->smp.rsp; + void *rsp = &request->sci.smp.rsp; dev_dbg(&isci_host->pdev->dev, "%s: SMP protocol completion\n", @@ -1051,8 +1036,7 @@ void isci_request_io_request_complete( * the maximum was transferred. */ u32 transferred_length - = scic_io_request_get_number_of_bytes_transferred( - request->sci_request_handle); + = scic_io_request_get_number_of_bytes_transferred(&request->sci); task->task_status.residual = task->total_xfer_len - transferred_length; @@ -1165,12 +1149,12 @@ void isci_request_io_request_complete( /* complete the io request to the core. */ scic_controller_complete_io(&isci_host->sci, &isci_device->sci, - request->sci_request_handle); - /* NULL the request handle so it cannot be completed or + &request->sci); + /* set terminated handle so it cannot be completed or * terminated again, and to cause any calls into abort * task to recognize the already completed case. */ - request->sci_request_handle = NULL; + request->terminated = true; isci_host_can_dequeue(isci_host, 1); } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index ddfbf71..89d8b0a 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -82,11 +82,11 @@ enum task_type { }; struct isci_request { - struct scic_sds_request *sci_request_handle; enum isci_request_status status; enum task_type ttype; unsigned short io_tag; bool complete_in_target; + bool terminated; union ttype_ptr_union { struct sas_task *io_task_ptr; /* When ttype==io_task */ @@ -103,7 +103,6 @@ struct isci_request { dma_addr_t zero_scatter_daddr; unsigned int num_sg_entries; /* returned by pci_alloc_sg */ - unsigned int request_alloc_size; /* size of block from dma_pool_alloc */ /** Note: "io_request_completion" is completed in two different ways * depending on whether this is a TMF or regular request. @@ -115,9 +114,16 @@ struct isci_request { * TMF was aborting is guaranteed to have completed. */ struct completion *io_request_completion; - struct scic_sds_request sci_req[0] ____cacheline_aligned; + struct scic_sds_request sci; }; +static inline struct isci_request *sci_req_to_ireq(struct scic_sds_request *sci_req) +{ + struct isci_request *ireq = container_of(sci_req, typeof(*ireq), sci); + + return ireq; +} + /** * This function gets the status of the request object. * @request: This parameter points to the isci_request object diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 578b1c5..08dabf0 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -72,7 +72,7 @@ struct host_to_dev_fis *isci_sata_task_to_fis_copy(struct sas_task *task) { struct isci_request *ireq = task->lldd_task; - struct host_to_dev_fis *fis = &ireq->sci_request_handle->stp.cmd; + struct host_to_dev_fis *fis = &ireq->sci.stp.cmd; memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); @@ -118,7 +118,7 @@ void isci_sata_set_ncq_tag( struct isci_request *request = task->lldd_task; register_fis->sector_count = qc->tag << 3; - scic_stp_io_request_set_ncq_tag(request->sci_request_handle, qc->tag); + scic_stp_io_request_set_ncq_tag(&request->sci, qc->tag); } /** @@ -156,7 +156,7 @@ void isci_request_process_stp_response(struct sas_task *task, enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) { - struct scic_sds_request *sci_req = ireq->sci_request_handle; + struct scic_sds_request *sci_req = &ireq->sci; struct isci_tmf *isci_tmf; enum sci_status status; @@ -190,9 +190,7 @@ enum sci_status isci_sata_management_task_request_build(struct isci_request *ire /* core builds the protocol specific request * based on the h2d fis. */ - status = scic_task_request_construct_sata( - ireq->sci_request_handle - ); + status = scic_task_request_construct_sata(&ireq->sci); return status; } diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 492faee..7adaf71 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -300,8 +300,7 @@ static enum sci_status isci_task_request_build( /* let the core do it's construct. */ status = scic_task_request_construct(&isci_host->sci, sci_device, SCI_CONTROLLER_INVALID_IO_TAG, - request, &request->sci_req, - &request->sci_request_handle); + &request->sci); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -312,14 +311,10 @@ static enum sci_status isci_task_request_build( goto errout; } - request->sci_request_handle->ireq = request; - /* XXX convert to get this from task->tproto like other drivers */ if (dev->dev_type == SAS_END_DEV) { isci_tmf->proto = SAS_PROTOCOL_SSP; - status = scic_task_request_construct_ssp( - request->sci_request_handle - ); + status = scic_task_request_construct_ssp(&request->sci); if (status != SCI_SUCCESS) goto errout; } @@ -376,8 +371,7 @@ static void isci_tmf_timeout_cb(void *tmf_request_arg) status = scic_controller_terminate_request( &request->isci_host->sci, &request->isci_device->sci, - request->sci_request_handle - ); + &request->sci); dev_dbg(&request->isci_host->pdev->dev, "%s: tmf_request = %p; tmf = %p; status = %d\n", @@ -467,9 +461,8 @@ int isci_task_execute_tmf( status = scic_controller_start_task( &isci_host->sci, sci_device, - request->sci_request_handle, - SCI_CONTROLLER_INVALID_IO_TAG - ); + &request->sci, + SCI_CONTROLLER_INVALID_IO_TAG); if (status != SCI_TASK_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -764,13 +757,13 @@ static void isci_terminate_request_core( * device condition (if the request handle is NULL, then the * request completed but needed additional handling here). */ - if (isci_request->sci_request_handle != NULL) { + if (!isci_request->terminated) { was_terminated = true; needs_cleanup_handling = true; status = scic_controller_terminate_request( &isci_host->sci, &isci_device->sci, - isci_request->sci_request_handle); + &isci_request->sci); } spin_unlock_irqrestore(&isci_host->scic_lock, flags); @@ -1430,7 +1423,7 @@ isci_task_request_complete(struct isci_host *ihost, enum isci_request_status old_state; struct isci_tmf *tmf = isci_request_access_tmf(ireq); struct completion *tmf_complete; - struct scic_sds_request *sci_req = ireq->sci_request_handle; + struct scic_sds_request *sci_req = &ireq->sci; dev_dbg(&ihost->pdev->dev, "%s: request = %p, status=%d\n", @@ -1460,12 +1453,11 @@ isci_task_request_complete(struct isci_host *ihost, /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; - scic_controller_complete_io(&ihost->sci, &idev->sci, - ireq->sci_request_handle); - /* NULL the request handle to make sure it cannot be terminated + scic_controller_complete_io(&ihost->sci, &idev->sci, &ireq->sci); + /* set the 'terminated' flag handle to make sure it cannot be terminated * or completed again. */ - ireq->sci_request_handle = NULL; + ireq->terminated = true;; isci_request_change_state(ireq, unallocated); list_del_init(&ireq->dev_node); -- cgit v0.10.2 From ce2b3261b6765c3b80fda95426c73e8d3bb1b035 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 May 2011 15:49:15 -0700 Subject: isci: unify constants cross driver constants are spread out over multiple header files, consolidate them into isci.h, and push some includes out to the source files that need them. TODO: remove SCI_MODE_SIZE infrastructure. TODO: task.h is full of inlines that are too large Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/core/sci_controller.h b/drivers/scsi/isci/core/sci_controller.h deleted file mode 100644 index 01316b1..0000000 --- a/drivers/scsi/isci/core/sci_controller.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_CONTROLLER_H_ -#define _SCI_CONTROLLER_H_ - -/** - * This file contains all of the interface methods that can be called by an SCI - * user on all SCI controller objects. - * - * - */ - -#define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF - -#endif /* _SCI_CONTROLLER_H_ */ - diff --git a/drivers/scsi/isci/core/sci_controller_constants.h b/drivers/scsi/isci/core/sci_controller_constants.h deleted file mode 100644 index 2525c26..0000000 --- a/drivers/scsi/isci/core/sci_controller_constants.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_CONTROLLER_CONSTANTS_H_ -#define _SCI_CONTROLLER_CONSTANTS_H_ - -/** - * This file contains constant values that change based on the type of core or - * framework being managed. These constants are exported in order to - * provide the user with information as to the bounds (i.e. how many) of - * specific objects. - * - * - */ - -#ifndef SCI_MAX_PHYS -/** - * - * - * This constant defines the maximum number of phy objects that can be - * supported for the SCU Driver Standard (SDS) library. This is tied directly - * to silicon capabilities. - */ -#define SCI_MAX_PHYS (4) -#endif - -#ifndef SCI_MAX_PORTS -/** - * - * - * This constant defines the maximum number of port objects that can be - * supported for the SCU Driver Standard (SDS) library. This is tied directly - * to silicon capabilities. - */ -#define SCI_MAX_PORTS SCI_MAX_PHYS -#endif - -#ifndef SCI_MIN_SMP_PHYS -/** - * - * - * This constant defines the minimum number of SMP phy objects that can be - * supported for a single expander level. This was determined by using 36 - * physical phys and room for 2 virtual phys. - */ -#define SCI_MIN_SMP_PHYS (38) -#endif - -#ifndef SCI_MAX_SMP_PHYS -/** - * - * - * This constant defines the maximum number of SMP phy objects that can be - * supported for the SCU Driver Standard (SDS) library. This number can be - * increased if required. - */ -#define SCI_MAX_SMP_PHYS (384) -#endif - -#ifndef SCI_MAX_REMOTE_DEVICES -/** - * - * - * This constant defines the maximum number of remote device objects that can - * be supported for the SCU Driver Standard (SDS) library. This is tied - * directly to silicon capabilities. - */ -#define SCI_MAX_REMOTE_DEVICES (256) -#endif - -#ifndef SCI_MIN_REMOTE_DEVICES -/** - * - * - * This constant defines the minimum number of remote device objects that can - * be supported for the SCU Driver Standard (SDS) library. This # can be - * configured for minimum memory environments to any value less than - * SCI_MAX_REMOTE_DEVICES - */ -#define SCI_MIN_REMOTE_DEVICES (16) -#endif - -#ifndef SCI_MAX_IO_REQUESTS -/** - * - * - * This constant defines the maximum number of IO request objects that can be - * supported for the SCU Driver Standard (SDS) library. This is tied directly - * to silicon capabilities. - */ -#define SCI_MAX_IO_REQUESTS (256) -#endif - -#ifndef SCI_MIN_IO_REQUESTS -/** - * - * - * This constant defines the minimum number of IO request objects that can be - * supported for the SCU Driver Standard (SDS) library. This # can be - * configured for minimum memory environments to any value less than - * SCI_MAX_IO_REQUESTS. - */ -#define SCI_MIN_IO_REQUESTS (1) -#endif - -#ifndef SCI_MAX_MSIX_MESSAGES -/** - * - * - * This constant defines the maximum number of MSI-X interrupt vectors/messages - * supported for an SCU hardware controller instance. - */ -#define SCI_MAX_MSIX_MESSAGES (2) -#endif - -#ifndef SCI_MAX_SCATTER_GATHER_ELEMENTS -/** - * - * - * This constant defines the maximum number of Scatter-Gather Elements to be - * used by any SCI component. - */ -#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 -#endif - -#ifndef SCI_MIN_SCATTER_GATHER_ELEMENTS -/** - * - * - * This constant defines the minimum number of Scatter-Gather Elements to be - * used by any SCI component. - */ -#define SCI_MIN_SCATTER_GATHER_ELEMENTS 1 -#endif - -/** - * - * - * This constant defines the maximum number of controllers that can occur in a - * single silicon package. - */ -#define SCI_MAX_CONTROLLERS 2 - -/** - * - * - * The maximum number of supported domain objects is currently tied to the - * maximum number of support port objects. - */ -#define SCI_MAX_DOMAINS SCI_MAX_PORTS - - -#endif /* _SCI_CONTROLLER_CONSTANTS_H_ */ - diff --git a/drivers/scsi/isci/core/sci_status.h b/drivers/scsi/isci/core/sci_status.h deleted file mode 100644 index 8b66619..0000000 --- a/drivers/scsi/isci/core/sci_status.h +++ /dev/null @@ -1,409 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_STATUS_H_ -#define _SCI_STATUS_H_ - -/** - * This file contains all of the return status codes utilized across the - * various sub-components in SCI. - * - * - */ - - -/** - * enum sci_status - This is the general return status enumeration for non-IO, - * non-task management related SCI interface methods. - * - * - */ -enum sci_status { - /** - * This member indicates successful completion. - */ - SCI_SUCCESS = 0, - - /** - * This value indicates that the calling method completed successfully, - * but that the IO may have completed before having it's start method - * invoked. This occurs during SAT translation for requests that do - * not require an IO to the target or for any other requests that may - * be completed without having to submit IO. - */ - SCI_SUCCESS_IO_COMPLETE_BEFORE_START, - - /** - * This Value indicates that the SCU hardware returned an early response - * because the io request specified more data than is returned by the - * target device (mode pages, inquiry data, etc.). The completion routine - * will handle this case to get the actual number of bytes transferred. - */ - SCI_SUCCESS_IO_DONE_EARLY, - - /** - * This member indicates that the object for which a state change is - * being requested is already in said state. - */ - SCI_WARNING_ALREADY_IN_STATE, - - /** - * This member indicates interrupt coalescence timer may cause SAS - * specification compliance issues (i.e. SMP target mode response - * frames must be returned within 1.9 milliseconds). - */ - SCI_WARNING_TIMER_CONFLICT, - - /** - * This field indicates a sequence of action is not completed yet. Mostly, - * this status is used when multiple ATA commands are needed in a SATI translation. - */ - SCI_WARNING_SEQUENCE_INCOMPLETE, - - /** - * This member indicates that there was a general failure. - */ - SCI_FAILURE, - - /** - * This member indicates that the SCI implementation is unable to complete - * an operation due to a critical flaw the prevents any further operation - * (i.e. an invalid pointer). - */ - SCI_FATAL_ERROR, - - /** - * This member indicates the calling function failed, because the state - * of the controller is in a state that prevents successful completion. - */ - SCI_FAILURE_INVALID_STATE, - - /** - * This member indicates the calling function failed, because there is - * insufficient resources/memory to complete the request. - */ - SCI_FAILURE_INSUFFICIENT_RESOURCES, - - /** - * This member indicates the calling function failed, because the - * controller object required for the operation can't be located. - */ - SCI_FAILURE_CONTROLLER_NOT_FOUND, - - /** - * This member indicates the calling function failed, because the - * discovered controller type is not supported by the library. - */ - SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE, - - /** - * This member indicates the calling function failed, because the - * requested initialization data version isn't supported. - */ - SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION, - - /** - * This member indicates the calling function failed, because the - * requested configuration of SAS Phys into SAS Ports is not supported. - */ - SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION, - - /** - * This member indicates the calling function failed, because the - * requested protocol is not supported by the remote device, port, - * or controller. - */ - SCI_FAILURE_UNSUPPORTED_PROTOCOL, - - /** - * This member indicates the calling function failed, because the - * requested information type is not supported by the SCI implementation. - */ - SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE, - - /** - * This member indicates the calling function failed, because the - * device already exists. - */ - SCI_FAILURE_DEVICE_EXISTS, - - /** - * This member indicates the calling function failed, because adding - * a phy to the object is not possible. - */ - SCI_FAILURE_ADDING_PHY_UNSUPPORTED, - - /** - * This member indicates the calling function failed, because the - * requested information type is not supported by the SCI implementation. - */ - SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD, - - /** - * This member indicates the calling function failed, because the SCI - * implementation does not support the supplied time limit. - */ - SCI_FAILURE_UNSUPPORTED_TIME_LIMIT, - - /** - * This member indicates the calling method failed, because the SCI - * implementation does not contain the specified Phy. - */ - SCI_FAILURE_INVALID_PHY, - - /** - * This member indicates the calling method failed, because the SCI - * implementation does not contain the specified Port. - */ - SCI_FAILURE_INVALID_PORT, - - /** - * This member indicates the calling method was partly successful - * The port was reset but not all phys in port are operational - */ - SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS, - - /** - * This member indicates that calling method failed - * The port reset did not complete because none of the phys are operational - */ - SCI_FAILURE_RESET_PORT_FAILURE, - - /** - * This member indicates the calling method failed, because the SCI - * implementation does not contain the specified remote device. - */ - SCI_FAILURE_INVALID_REMOTE_DEVICE, - - /** - * This member indicates the calling method failed, because the remote - * device is in a bad state and requires a reset. - */ - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, - - /** - * This member indicates the calling method failed, because the SCI - * implementation does not contain or support the specified IO tag. - */ - SCI_FAILURE_INVALID_IO_TAG, - - /** - * This member indicates that the operation failed and the user should - * check the response data associated with the IO. - */ - SCI_FAILURE_IO_RESPONSE_VALID, - - /** - * This member indicates that the operation failed, the failure is - * controller implementation specific, and the response data associated - * with the request is not valid. You can query for the controller - * specific error information via scic_controller_get_request_status() - */ - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, - - /** - * This member indicated that the operation failed because the - * user requested this IO to be terminated. - */ - SCI_FAILURE_IO_TERMINATED, - - /** - * This member indicates that the operation failed and the associated - * request requires a SCSI abort task to be sent to the target. - */ - SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, - - /** - * This member indicates that the operation failed because the supplied - * device could not be located. - */ - SCI_FAILURE_DEVICE_NOT_FOUND, - - /** - * This member indicates that the operation failed because the - * objects association is required and is not correctly set. - */ - SCI_FAILURE_INVALID_ASSOCIATION, - - /** - * This member indicates that the operation failed, because a timeout - * occurred. - */ - SCI_FAILURE_TIMEOUT, - - /** - * This member indicates that the operation failed, because the user - * specified a value that is either invalid or not supported. - */ - SCI_FAILURE_INVALID_PARAMETER_VALUE, - - /** - * This value indicates that the operation failed, because the number - * of messages (MSI-X) is not supported. - */ - SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT, - - /** - * This value indicates that the method failed due to a lack of - * available NCQ tags. - */ - SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, - - /** - * This value indicates that a protocol violation has occurred on the - * link. - */ - SCI_FAILURE_PROTOCOL_VIOLATION, - - /** - * This value indicates a failure condition that retry may help to clear. - */ - SCI_FAILURE_RETRY_REQUIRED, - - /** - * This field indicates the retry limit was reached when a retry is attempted - */ - SCI_FAILURE_RETRY_LIMIT_REACHED, - - /** - * This member indicates the calling method was partly successful. - * Mostly, this status is used when a LUN_RESET issued to an expander attached - * STP device in READY NCQ substate needs to have RNC suspended/resumed - * before posting TC. - */ - SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS, - - /** - * This field indicates an illegal phy connection based on the routing attribute - * of both expander phy attached to each other. - */ - SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION, - - /** - * This field indicates a CONFIG ROUTE INFO command has a response with function result - * INDEX DOES NOT EXIST, usually means exceeding max route index. - */ - SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX, - - /** - * This value indicates that an unsupported PCI device ID has been - * specified. This indicates that attempts to invoke - * scic_library_allocate_controller() will fail. - */ - SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID - -}; - -/** - * enum sci_io_status - This enumeration depicts all of the possible IO - * completion status values. Each value in this enumeration maps directly - * to a value in the enum sci_status enumeration. Please refer to that - * enumeration for detailed comments concerning what the status represents. - * - * Add the API to retrieve the SCU status from the core. Check to see that the - * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL - * - SCI_IO_FAILURE_INVALID_IO_TAG - */ -enum sci_io_status { - SCI_IO_SUCCESS = SCI_SUCCESS, - SCI_IO_FAILURE = SCI_FAILURE, - SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START, - SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY, - SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, - SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, - SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, - SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, - SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, - SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, - SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, - SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, - SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION, - - SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, - - SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED, - SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED, - SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE -}; - -/** - * enum sci_task_status - This enumeration depicts all of the possible task - * completion status values. Each value in this enumeration maps directly - * to a value in the enum sci_status enumeration. Please refer to that - * enumeration for detailed comments concerning what the status represents. - * - * Check to see that the following status are properly handled: - */ -enum sci_task_status { - SCI_TASK_SUCCESS = SCI_SUCCESS, - SCI_TASK_FAILURE = SCI_FAILURE, - SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, - SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, - SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, - SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG, - SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, - SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, - SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, - SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, - - SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, - SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS - -}; - - -#endif /* _SCI_STATUS_H_ */ - diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c index 4e60d55..0101fec 100644 --- a/drivers/scsi/isci/core/sci_util.c +++ b/drivers/scsi/isci/core/sci_util.c @@ -56,6 +56,7 @@ #include #include "sci_util.h" #include "sci_environment.h" +#include "request.h" void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) { diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index ea09d0b..8b8c925 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -56,17 +56,6 @@ #ifndef _SCIC_SDS_USER_PARAMETERS_H_ #define _SCIC_SDS_USER_PARAMETERS_H_ -/** - * This file contains all of the structure definitions and interface methods - * that can be called by a SCIC user on the SCU Driver Standard - * (struct scic_sds_user_parameters) user parameter block. - * - * - */ - - -#include "sci_status.h" -#include "sci_controller_constants.h" #include "probe_roms.h" struct scic_sds_controller; diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h index 50ba155..bd08f30 100644 --- a/drivers/scsi/isci/core/scic_controller.h +++ b/drivers/scsi/isci/core/scic_controller.h @@ -56,8 +56,6 @@ #ifndef _SCIC_CONTROLLER_H_ #define _SCIC_CONTROLLER_H_ -#include "sci_status.h" -#include "sci_controller.h" #include "scic_config_parameters.h" struct scic_sds_request; @@ -65,12 +63,6 @@ struct scic_sds_phy; struct scic_sds_port; struct scic_sds_remote_device; - -enum sci_controller_mode { - SCI_MODE_SPEED, /* Optimized for performance */ - SCI_MODE_SIZE /* Optimized for memory use */ -}; - enum sci_status scic_controller_construct(struct scic_sds_controller *c, void __iomem *scu_base, void __iomem *smu_base); diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h index f7c6d42..a4664cc3 100644 --- a/drivers/scsi/isci/core/scic_io_request.h +++ b/drivers/scsi/isci/core/scic_io_request.h @@ -56,15 +56,7 @@ #ifndef _SCIC_IO_REQUEST_H_ #define _SCIC_IO_REQUEST_H_ -/** - * This file contains the structures and interface methods that can be - * referenced and used by the SCI user for the SCI IO request object. - * - * Determine the failure situations and return values. - */ - #include -#include "sci_status.h" struct scic_sds_request; struct scic_sds_remote_device; diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 1fb49f0..f046b4a 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -66,7 +66,6 @@ #include #include -#include "sci_status.h" struct scic_sds_phy; struct scic_sds_port; diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index 44a8ea8..51e7eede 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -56,8 +56,8 @@ #ifndef _SCIC_PORT_H_ #define _SCIC_PORT_H_ +#include "isci.h" #include "sas.h" -#include "sci_status.h" #include "scic_phy.h" struct scic_sds_port; diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 852b7d5..e77265b 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -68,11 +68,11 @@ #include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" -#include "scu_constants.h" #include "scu_event_codes.h" #include "scu_remote_node_context.h" #include "scu_task_context.h" #include "scu_unsolicited_frame.h" +#include "timers.h" #define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 0d50473..5c00f96 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -67,7 +67,6 @@ */ #include "sci_pool.h" -#include "sci_controller_constants.h" #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_config_parameters.h" @@ -76,7 +75,6 @@ #include "remote_node_table.h" #include "remote_device.h" #include "scu_registers.h" -#include "scu_constants.h" #include "scu_task_context.h" #include "scu_unsolicited_frame.h" #include "scic_sds_unsolicited_frame_control.h" diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index f0f4c74..c6df0e2 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -65,6 +65,7 @@ #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" +#include "timers.h" #define SCIC_SDS_PHY_MIN_TIMER_COUNT (SCI_MAX_PHYS) #define SCIC_SDS_PHY_MAX_TIMER_COUNT (SCI_MAX_PHYS) diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 01288dd..9302e39 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -64,6 +64,7 @@ #include "scic_sds_request.h" #include "sci_environment.h" #include "scu_registers.h" +#include "timers.h" #define SCIC_SDS_PORT_MIN_TIMER_COUNT (SCI_MAX_PORTS) #define SCIC_SDS_PORT_MAX_TIMER_COUNT (SCI_MAX_PORTS) diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 3633561..3696deb 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -58,21 +58,15 @@ #include #include "sas.h" -#include "sci_controller_constants.h" #include "scu_registers.h" - -#define SCIC_SDS_DUMMY_PORT 0xFF +#include "sci_base_state_machine.h" struct scic_sds_controller; struct scic_sds_phy; struct scic_sds_remote_device; struct scic_sds_request; -/** - * This constant defines the value utilized by SCI Components to indicate - * an invalid handle. - */ -#define SCI_INVALID_HANDLE 0x0 +#define SCIC_SDS_DUMMY_PORT 0xFF /** * enum SCIC_SDS_PORT_READY_SUBSTATES - diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 2d3d067..3fad8c1 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -53,17 +53,11 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the implementation for the public and protected methods - * for the port configuration agent. - * - * - */ - #include "sci_environment.h" #include "scic_controller.h" #include "scic_sds_controller.h" #include "scic_sds_port_configuration_agent.h" +#include "timers.h" #define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) #define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 50dd19b..de35885 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -67,8 +67,9 @@ #include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" -#include "scu_constants.h" #include "scu_task_context.h" +#include "request.h" +#include "task.h" /* * **************************************************************************** diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 1dd98aa..5ce7ff2 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -56,11 +56,11 @@ #ifndef _SCIC_SDS_IO_REQUEST_H_ #define _SCIC_SDS_IO_REQUEST_H_ +#include "isci.h" #include "scic_io_request.h" #include "sci_base_state_machine.h" #include "scu_task_context.h" #include "scic_sds_stp_request.h" -#include "scu_constants.h" #include "sas.h" struct scic_sds_controller; diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 2677393..c1c316c 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -69,6 +69,7 @@ #include "scu_completion_codes.h" #include "scu_event_codes.h" #include "scu_task_context.h" +#include "request.h" void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) { diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h index 4eb244c..0d8ca8c 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h @@ -53,19 +53,11 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains all of the unsolicited frame related management for the - * address table, the headers, and actual payload buffers. - * - * - */ - #ifndef _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ #define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ +#include "isci.h" #include "scu_unsolicited_frame.h" -#include "scu_constants.h" -#include "sci_status.h" /** * enum unsolicited_frame_state - @@ -144,15 +136,6 @@ struct scic_sds_uf_header_array { }; -/* - * Determine the size of the unsolicited frame array including - * unused buffers. */ -#if SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES -#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MIN_UF_TABLE_ENTRIES -#else -#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MAX_UNSOLICITED_FRAMES -#endif /* SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES */ - /** * struct scic_sds_uf_buffer_array - * diff --git a/drivers/scsi/isci/core/scic_task_request.h b/drivers/scsi/isci/core/scic_task_request.h index 98cfaa9..790cee9 100644 --- a/drivers/scsi/isci/core/scic_task_request.h +++ b/drivers/scsi/isci/core/scic_task_request.h @@ -56,16 +56,7 @@ #ifndef _SCIC_TASK_REQUEST_H_ #define _SCIC_TASK_REQUEST_H_ -/** - * This file contains the structures and interface methods that can be - * referenced and used by the SCI user for to utilize task management - * requests. - * - * - */ - - -#include "sci_status.h" +#include "isci.h" struct scic_sds_request; struct scic_sds_remote_device; diff --git a/drivers/scsi/isci/core/scu_constants.h b/drivers/scsi/isci/core/scu_constants.h deleted file mode 100644 index a99d110..0000000 --- a/drivers/scsi/isci/core/scu_constants.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCU_CONSTANTS_H_ -#define _SCU_CONSTANTS_H_ - -/** - * This file contains the SCU hardware constants. - * - * - */ - -#include "sci_controller_constants.h" - -/** - * - * - * 2 indicates the maximum number of UFs that can occur for a given IO request. - * The hardware handles reception of additional unsolicited frames while all - * UFs are in use, by holding off the transmitting device. This number could - * be theoretically reduced to 1, but 2 provides for more reliable operation. - * During SATA PIO operation, it is possible under some conditions for there to - * be 3 separate FISes received, back to back to back (PIO Setup, Data, D2H - * Register). It is unlikely to have all 3 pending all at once without some of - * them already being processed. - */ -#define SCU_MIN_UNSOLICITED_FRAMES (1) -#define SCU_MIN_CRITICAL_NOTIFICATIONS (24) -#define SCU_MIN_EVENTS (4) -#define SCU_MIN_COMPLETION_QUEUE_SCRATCH (2) -#define SCU_MIN_COMPLETION_QUEUE_ENTRIES (SCU_MIN_CRITICAL_NOTIFICATIONS \ - + SCU_MIN_EVENTS \ - + SCU_MIN_UNSOLICITED_FRAMES \ - + SCI_MIN_IO_REQUESTS \ - + SCU_MIN_COMPLETION_QUEUE_SCRATCH) - -#define SCU_MAX_CRITICAL_NOTIFICATIONS (384) -#define SCU_MAX_EVENTS (128) -#define SCU_MAX_UNSOLICITED_FRAMES (128) -#define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) -#define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ - + SCU_MAX_EVENTS \ - + SCU_MAX_UNSOLICITED_FRAMES \ - + SCI_MAX_IO_REQUESTS \ - + SCU_MAX_COMPLETION_QUEUE_SCRATCH) - -#if !defined(ENABLE_MINIMUM_MEMORY_MODE) -#define SCU_UNSOLICITED_FRAME_COUNT SCU_MAX_UNSOLICITED_FRAMES -#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MAX_CRITICAL_NOTIFICATIONS -#define SCU_EVENT_COUNT SCU_MAX_EVENTS -#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MAX_COMPLETION_QUEUE_SCRATCH -#define SCU_IO_REQUEST_COUNT SCI_MAX_IO_REQUESTS -#define SCU_IO_REQUEST_SGE_COUNT SCI_MAX_SCATTER_GATHER_ELEMENTS -#define SCU_COMPLETION_QUEUE_COUNT SCU_MAX_COMPLETION_QUEUE_ENTRIES -#else -#define SCU_UNSOLICITED_FRAME_COUNT SCU_MIN_UNSOLICITED_FRAMES -#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MIN_CRITICAL_NOTIFICATIONS -#define SCU_EVENT_COUNT SCU_MIN_EVENTS -#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MIN_COMPLETION_QUEUE_SCRATCH -#define SCU_IO_REQUEST_COUNT SCI_MIN_IO_REQUESTS -#define SCU_IO_REQUEST_SGE_COUNT SCI_MIN_SCATTER_GATHER_ELEMENTS -#define SCU_COMPLETION_QUEUE_COUNT SCU_MIN_COMPLETION_QUEUE_ENTRIES -#endif /* !defined(ENABLE_MINIMUM_MEMORY_OPERATION) */ - -/** - * - * - * The SCU_COMPLETION_QUEUE_COUNT constant indicates the size of the completion - * queue into which the hardware DMAs 32-bit quantas (completion entries). - */ - -/** - * - * - * This queue must be programmed to a power of 2 size (e.g. 32, 64, 1024, etc.). - */ -#if (SCU_COMPLETION_QUEUE_COUNT != 16) && \ - (SCU_COMPLETION_QUEUE_COUNT != 32) && \ - (SCU_COMPLETION_QUEUE_COUNT != 64) && \ - (SCU_COMPLETION_QUEUE_COUNT != 128) && \ - (SCU_COMPLETION_QUEUE_COUNT != 256) && \ - (SCU_COMPLETION_QUEUE_COUNT != 512) && \ - (SCU_COMPLETION_QUEUE_COUNT != 1024) -#error "SCU_COMPLETION_QUEUE_COUNT must be set to a power of 2." -#endif - -#if SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES -#error "Invalid configuration of unsolicited frame constants" -#endif /* SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES */ - -#define SCU_MIN_UF_TABLE_ENTRIES (8) -#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) -#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024) -#define SCU_INVALID_FRAME_INDEX (0xFFFF) - -#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) -#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) - -#endif /* _SCU_CONSTANTS_H_ */ diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 271a7e1..5847149 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -60,7 +60,9 @@ #include "request.h" #include "host.h" #include "probe_roms.h" +#include "scic_controller.h" #include "scic_sds_controller.h" +#include "timers.h" irqreturn_t isci_msix_isr(int vec, void *data) { diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index afa41e8..13c1c99 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -53,26 +53,12 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - -#if !defined(_SCI_HOST_H_) +#ifndef _SCI_HOST_H_ #define _SCI_HOST_H_ -#include "phy.h" #include "scic_sds_controller.h" -#include "timers.h" #include "remote_device.h" - -#define DRV_NAME "isci" -#define SCI_PCI_BAR_COUNT 2 -#define SCI_NUM_MSI_X_INT 2 -#define SCI_SMU_BAR 0 -#define SCI_SMU_BAR_SIZE (16*1024) -#define SCI_SCU_BAR 1 -#define SCI_SCU_BAR_SIZE (4*1024*1024) -#define SCI_IO_SPACE_BAR0 2 -#define SCI_IO_SPACE_BAR1 3 -#define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ -#define SCIC_CONTROLLER_STOP_TIMEOUT 5000 +#include "phy.h" struct isci_host { struct scic_sds_controller sci; diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 522d39f..df132c0 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -61,9 +61,9 @@ #include #include "isci.h" #include "task.h" -#include "sci_controller_constants.h" #include "sci_environment.h" #include "probe_roms.h" +#include "scic_controller.h" static struct scsi_transport_template *isci_transport_template; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 60c8462..800f233 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -56,22 +56,470 @@ #ifndef __ISCI_H__ #define __ISCI_H__ -#include -#include -#include -#include #include -#include -#include -#include - -#include "scic_controller.h" -#include "host.h" -#include "timers.h" -#include "sci_status.h" -#include "request.h" -#include "task.h" -#include "sata.h" + +#define DRV_NAME "isci" +#define SCI_PCI_BAR_COUNT 2 +#define SCI_NUM_MSI_X_INT 2 +#define SCI_SMU_BAR 0 +#define SCI_SMU_BAR_SIZE (16*1024) +#define SCI_SCU_BAR 1 +#define SCI_SCU_BAR_SIZE (4*1024*1024) +#define SCI_IO_SPACE_BAR0 2 +#define SCI_IO_SPACE_BAR1 3 +#define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ +#define SCIC_CONTROLLER_STOP_TIMEOUT 5000 + +#define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF + +enum sci_controller_mode { + SCI_MODE_SPEED, + SCI_MODE_SIZE /* deprecated */ +}; + +#define SCI_MAX_PHYS (4) +#define SCI_MAX_PORTS SCI_MAX_PHYS +#define SCI_MIN_SMP_PHYS (38) +#define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ +#define SCI_MAX_REMOTE_DEVICES (256) +#define SCI_MIN_REMOTE_DEVICES (16) +#define SCI_MAX_IO_REQUESTS (256) +#define SCI_MIN_IO_REQUESTS (1) +#define SCI_MAX_MSIX_MESSAGES (2) +#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */ +#define SCI_MIN_SCATTER_GATHER_ELEMENTS 1 +#define SCI_MAX_CONTROLLERS 2 +#define SCI_MAX_DOMAINS SCI_MAX_PORTS + +/* 2 indicates the maximum number of UFs that can occur for a given IO request. + * The hardware handles reception of additional unsolicited frames while all + * UFs are in use, by holding off the transmitting device. This number could + * be theoretically reduced to 1, but 2 provides for more reliable operation. + * During SATA PIO operation, it is possible under some conditions for there to + * be 3 separate FISes received, back to back to back (PIO Setup, Data, D2H + * Register). It is unlikely to have all 3 pending all at once without some of + * them already being processed. + */ +#define SCU_MIN_UNSOLICITED_FRAMES (1) +#define SCU_MIN_CRITICAL_NOTIFICATIONS (24) +#define SCU_MIN_EVENTS (4) +#define SCU_MIN_COMPLETION_QUEUE_SCRATCH (2) +#define SCU_MIN_COMPLETION_QUEUE_ENTRIES (SCU_MIN_CRITICAL_NOTIFICATIONS \ + + SCU_MIN_EVENTS \ + + SCU_MIN_UNSOLICITED_FRAMES \ + + SCI_MIN_IO_REQUESTS \ + + SCU_MIN_COMPLETION_QUEUE_SCRATCH) + +#define SCU_MAX_CRITICAL_NOTIFICATIONS (384) +#define SCU_MAX_EVENTS (128) +#define SCU_MAX_UNSOLICITED_FRAMES (128) +#define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) +#define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ + + SCU_MAX_EVENTS \ + + SCU_MAX_UNSOLICITED_FRAMES \ + + SCI_MAX_IO_REQUESTS \ + + SCU_MAX_COMPLETION_QUEUE_SCRATCH) + +#if !defined(ENABLE_MINIMUM_MEMORY_MODE) +#define SCU_UNSOLICITED_FRAME_COUNT SCU_MAX_UNSOLICITED_FRAMES +#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MAX_CRITICAL_NOTIFICATIONS +#define SCU_EVENT_COUNT SCU_MAX_EVENTS +#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MAX_COMPLETION_QUEUE_SCRATCH +#define SCU_IO_REQUEST_COUNT SCI_MAX_IO_REQUESTS +#define SCU_IO_REQUEST_SGE_COUNT SCI_MAX_SCATTER_GATHER_ELEMENTS +#define SCU_COMPLETION_QUEUE_COUNT SCU_MAX_COMPLETION_QUEUE_ENTRIES +#else +#define SCU_UNSOLICITED_FRAME_COUNT SCU_MIN_UNSOLICITED_FRAMES +#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MIN_CRITICAL_NOTIFICATIONS +#define SCU_EVENT_COUNT SCU_MIN_EVENTS +#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MIN_COMPLETION_QUEUE_SCRATCH +#define SCU_IO_REQUEST_COUNT SCI_MIN_IO_REQUESTS +#define SCU_IO_REQUEST_SGE_COUNT SCI_MIN_SCATTER_GATHER_ELEMENTS +#define SCU_COMPLETION_QUEUE_COUNT SCU_MIN_COMPLETION_QUEUE_ENTRIES +#endif /* !defined(ENABLE_MINIMUM_MEMORY_OPERATION) */ + +/** + * + * + * The SCU_COMPLETION_QUEUE_COUNT constant indicates the size of the completion + * queue into which the hardware DMAs 32-bit quantas (completion entries). + */ + +/** + * + * + * This queue must be programmed to a power of 2 size (e.g. 32, 64, 1024, etc.). + */ +#if (SCU_COMPLETION_QUEUE_COUNT != 16) && \ + (SCU_COMPLETION_QUEUE_COUNT != 32) && \ + (SCU_COMPLETION_QUEUE_COUNT != 64) && \ + (SCU_COMPLETION_QUEUE_COUNT != 128) && \ + (SCU_COMPLETION_QUEUE_COUNT != 256) && \ + (SCU_COMPLETION_QUEUE_COUNT != 512) && \ + (SCU_COMPLETION_QUEUE_COUNT != 1024) +#error "SCU_COMPLETION_QUEUE_COUNT must be set to a power of 2." +#endif + +#if SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES +#error "Invalid configuration of unsolicited frame constants" +#endif /* SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES */ + +#define SCU_MIN_UF_TABLE_ENTRIES (8) +#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) +#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024) +#define SCU_INVALID_FRAME_INDEX (0xFFFF) + +#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) +#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) + +/* + * Determine the size of the unsolicited frame array including + * unused buffers. */ +#if SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES +#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MIN_UF_TABLE_ENTRIES +#else +#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MAX_UNSOLICITED_FRAMES +#endif /* SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES */ + +/** + * enum sci_status - This is the general return status enumeration for non-IO, + * non-task management related SCI interface methods. + * + * + */ +enum sci_status { + /** + * This member indicates successful completion. + */ + SCI_SUCCESS = 0, + + /** + * This value indicates that the calling method completed successfully, + * but that the IO may have completed before having it's start method + * invoked. This occurs during SAT translation for requests that do + * not require an IO to the target or for any other requests that may + * be completed without having to submit IO. + */ + SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + + /** + * This Value indicates that the SCU hardware returned an early response + * because the io request specified more data than is returned by the + * target device (mode pages, inquiry data, etc.). The completion routine + * will handle this case to get the actual number of bytes transferred. + */ + SCI_SUCCESS_IO_DONE_EARLY, + + /** + * This member indicates that the object for which a state change is + * being requested is already in said state. + */ + SCI_WARNING_ALREADY_IN_STATE, + + /** + * This member indicates interrupt coalescence timer may cause SAS + * specification compliance issues (i.e. SMP target mode response + * frames must be returned within 1.9 milliseconds). + */ + SCI_WARNING_TIMER_CONFLICT, + + /** + * This field indicates a sequence of action is not completed yet. Mostly, + * this status is used when multiple ATA commands are needed in a SATI translation. + */ + SCI_WARNING_SEQUENCE_INCOMPLETE, + + /** + * This member indicates that there was a general failure. + */ + SCI_FAILURE, + + /** + * This member indicates that the SCI implementation is unable to complete + * an operation due to a critical flaw the prevents any further operation + * (i.e. an invalid pointer). + */ + SCI_FATAL_ERROR, + + /** + * This member indicates the calling function failed, because the state + * of the controller is in a state that prevents successful completion. + */ + SCI_FAILURE_INVALID_STATE, + + /** + * This member indicates the calling function failed, because there is + * insufficient resources/memory to complete the request. + */ + SCI_FAILURE_INSUFFICIENT_RESOURCES, + + /** + * This member indicates the calling function failed, because the + * controller object required for the operation can't be located. + */ + SCI_FAILURE_CONTROLLER_NOT_FOUND, + + /** + * This member indicates the calling function failed, because the + * discovered controller type is not supported by the library. + */ + SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE, + + /** + * This member indicates the calling function failed, because the + * requested initialization data version isn't supported. + */ + SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION, + + /** + * This member indicates the calling function failed, because the + * requested configuration of SAS Phys into SAS Ports is not supported. + */ + SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION, + + /** + * This member indicates the calling function failed, because the + * requested protocol is not supported by the remote device, port, + * or controller. + */ + SCI_FAILURE_UNSUPPORTED_PROTOCOL, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE, + + /** + * This member indicates the calling function failed, because the + * device already exists. + */ + SCI_FAILURE_DEVICE_EXISTS, + + /** + * This member indicates the calling function failed, because adding + * a phy to the object is not possible. + */ + SCI_FAILURE_ADDING_PHY_UNSUPPORTED, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD, + + /** + * This member indicates the calling function failed, because the SCI + * implementation does not support the supplied time limit. + */ + SCI_FAILURE_UNSUPPORTED_TIME_LIMIT, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Phy. + */ + SCI_FAILURE_INVALID_PHY, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Port. + */ + SCI_FAILURE_INVALID_PORT, + + /** + * This member indicates the calling method was partly successful + * The port was reset but not all phys in port are operational + */ + SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS, + + /** + * This member indicates that calling method failed + * The port reset did not complete because none of the phys are operational + */ + SCI_FAILURE_RESET_PORT_FAILURE, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified remote device. + */ + SCI_FAILURE_INVALID_REMOTE_DEVICE, + + /** + * This member indicates the calling method failed, because the remote + * device is in a bad state and requires a reset. + */ + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain or support the specified IO tag. + */ + SCI_FAILURE_INVALID_IO_TAG, + + /** + * This member indicates that the operation failed and the user should + * check the response data associated with the IO. + */ + SCI_FAILURE_IO_RESPONSE_VALID, + + /** + * This member indicates that the operation failed, the failure is + * controller implementation specific, and the response data associated + * with the request is not valid. You can query for the controller + * specific error information via scic_controller_get_request_status() + */ + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + + /** + * This member indicated that the operation failed because the + * user requested this IO to be terminated. + */ + SCI_FAILURE_IO_TERMINATED, + + /** + * This member indicates that the operation failed and the associated + * request requires a SCSI abort task to be sent to the target. + */ + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + + /** + * This member indicates that the operation failed because the supplied + * device could not be located. + */ + SCI_FAILURE_DEVICE_NOT_FOUND, + + /** + * This member indicates that the operation failed because the + * objects association is required and is not correctly set. + */ + SCI_FAILURE_INVALID_ASSOCIATION, + + /** + * This member indicates that the operation failed, because a timeout + * occurred. + */ + SCI_FAILURE_TIMEOUT, + + /** + * This member indicates that the operation failed, because the user + * specified a value that is either invalid or not supported. + */ + SCI_FAILURE_INVALID_PARAMETER_VALUE, + + /** + * This value indicates that the operation failed, because the number + * of messages (MSI-X) is not supported. + */ + SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT, + + /** + * This value indicates that the method failed due to a lack of + * available NCQ tags. + */ + SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + + /** + * This value indicates that a protocol violation has occurred on the + * link. + */ + SCI_FAILURE_PROTOCOL_VIOLATION, + + /** + * This value indicates a failure condition that retry may help to clear. + */ + SCI_FAILURE_RETRY_REQUIRED, + + /** + * This field indicates the retry limit was reached when a retry is attempted + */ + SCI_FAILURE_RETRY_LIMIT_REACHED, + + /** + * This member indicates the calling method was partly successful. + * Mostly, this status is used when a LUN_RESET issued to an expander attached + * STP device in READY NCQ substate needs to have RNC suspended/resumed + * before posting TC. + */ + SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS, + + /** + * This field indicates an illegal phy connection based on the routing attribute + * of both expander phy attached to each other. + */ + SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION, + + /** + * This field indicates a CONFIG ROUTE INFO command has a response with function result + * INDEX DOES NOT EXIST, usually means exceeding max route index. + */ + SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX, + + /** + * This value indicates that an unsupported PCI device ID has been + * specified. This indicates that attempts to invoke + * scic_library_allocate_controller() will fail. + */ + SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID + +}; + +/** + * enum sci_io_status - This enumeration depicts all of the possible IO + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Add the API to retrieve the SCU status from the core. Check to see that the + * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL + * - SCI_IO_FAILURE_INVALID_IO_TAG + */ +enum sci_io_status { + SCI_IO_SUCCESS = SCI_SUCCESS, + SCI_IO_FAILURE = SCI_FAILURE, + SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY, + SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION, + + SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED, + SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED, + SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE +}; + +/** + * enum sci_task_status - This enumeration depicts all of the possible task + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Check to see that the following status are properly handled: + */ +enum sci_task_status { + SCI_TASK_SUCCESS = SCI_SUCCESS, + SCI_TASK_FAILURE = SCI_FAILURE, + SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG, + SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + + SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS + +}; extern unsigned char no_outbound_task_to; extern u16 ssp_max_occ_to; @@ -85,9 +533,9 @@ irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); irqreturn_t isci_error_isr(int vec, void *data); +struct scic_sds_controller; bool scic_sds_controller_isr(struct scic_sds_controller *scic); void scic_sds_controller_completion_handler(struct scic_sds_controller *scic); bool scic_sds_controller_error_isr(struct scic_sds_controller *scic); void scic_sds_controller_error_handler(struct scic_sds_controller *scic); - #endif /* __ISCI_H__ */ diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 3280049..1134395 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -54,10 +54,10 @@ */ #include "isci.h" +#include "host.h" #include "phy.h" #include "scic_port.h" #include "scic_config_parameters.h" -#include "core/scic_sds_phy.h" struct scic_sds_phy; extern enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy); diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 93ec2d4..3a95adb 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -52,16 +52,12 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - - #ifndef _ISCI_PHY_H_ #define _ISCI_PHY_H_ #include #include #include "scic_sds_phy.h" -#include "port.h" -#include "host.h" struct isci_phy { struct scic_sds_phy sci; @@ -89,6 +85,7 @@ static inline struct isci_phy *sci_phy_to_iphy(struct scic_sds_phy *sci_phy) return iphy; } +struct isci_host; void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index); int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf); diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 3550345..59505cb 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -55,6 +55,9 @@ #ifndef _ISCI_PORT_H_ #define _ISCI_PORT_H_ + +#include +#include "isci.h" #include "scic_sds_port.h" struct isci_phy; diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 933d811..7055174 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -32,7 +32,6 @@ #include "isci.h" #include "task.h" -#include "sci_controller_constants.h" #include "sci_environment.h" #include "probe_roms.h" diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 5598336..f4ef19a 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -58,6 +58,7 @@ #ifdef __KERNEL__ #include #include +#include "isci.h" struct isci_orom *isci_request_oprom(struct pci_dev *pdev); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 2e433b7..a118f58 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -56,7 +56,6 @@ #ifndef _ISCI_REMOTE_DEVICE_H_ #define _ISCI_REMOTE_DEVICE_H_ #include -#include "sci_status.h" #include "scu_remote_node_context.h" #include "remote_node_context.h" #include "port.h" diff --git a/drivers/scsi/isci/remote_node_table.h b/drivers/scsi/isci/remote_node_table.h index 9c02a6c..5737d9a 100644 --- a/drivers/scsi/isci/remote_node_table.h +++ b/drivers/scsi/isci/remote_node_table.h @@ -56,14 +56,7 @@ #ifndef _SCIC_SDS_REMOTE_NODE_TABLE_H_ #define _SCIC_SDS_REMOTE_NODE_TABLE_H_ -/** - * This file contains the structures, constants and prototypes used for the - * remote node table. - * - * - */ - -#include "sci_controller_constants.h" +#include "isci.h" /** * diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 4961ee3..a580728 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -62,6 +62,7 @@ #include "sata.h" #include "scu_completion_codes.h" #include "scic_sds_request.h" +#include "scic_controller.h" #include "sas.h" static enum sci_status isci_request_ssp_request_construct( diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 89d8b0a..06786ec 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -57,6 +57,7 @@ #define _ISCI_REQUEST_H_ #include "isci.h" +#include "host.h" #include "scic_sds_request.h" /** diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h index 1806969..30addba 100644 --- a/drivers/scsi/isci/sci_environment.h +++ b/drivers/scsi/isci/sci_environment.h @@ -56,8 +56,7 @@ #ifndef _SCI_ENVIRONMENT_H_ #define _SCI_ENVIRONMENT_H_ -#include "isci.h" -#include "core/scic_sds_controller.h" +#include "host.h" static inline struct device *scic_to_dev(struct scic_sds_controller *scic) diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 7adaf71..597c490 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -65,6 +65,8 @@ #include "sata.h" #include "task.h" #include "scic_sds_request.h" +#include "scic_controller.h" +#include "timers.h" /** * isci_task_refuse() - complete the request to the upper layer driver in diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index ecc5f13..c59dc96 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -56,6 +56,7 @@ #define _ISCI_TASK_H_ #include +#include "host.h" struct isci_request; diff --git a/drivers/scsi/isci/timers.c b/drivers/scsi/isci/timers.c index f33eff0..007700e 100644 --- a/drivers/scsi/isci/timers.c +++ b/drivers/scsi/isci/timers.c @@ -55,6 +55,7 @@ #include "isci.h" #include "timers.h" +#include "host.h" /** * isci_timer_list_construct() - This method contrucst the SCI Timer List -- cgit v0.10.2 From cc9203bf381a465cd115762b9cf7c9a313c874bc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 May 2011 17:34:44 -0700 Subject: isci: move core/controller to host Now that the data structures are unified unify the implementation in host.[ch] and cleanup namespace pollution. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 78ba0fc..45f8f68 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -5,7 +5,6 @@ isci-objs := init.o phy.o request.o sata.o \ host.o task.o probe_roms.o \ remote_node_context.o \ remote_node_table.o \ - core/scic_sds_controller.o \ core/scic_sds_request.o \ core/scic_sds_stp_request.o \ core/scic_sds_port.o \ diff --git a/drivers/scsi/isci/core/sci_pool.h b/drivers/scsi/isci/core/sci_pool.h deleted file mode 100644 index 016ec83..0000000 --- a/drivers/scsi/isci/core/sci_pool.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains the interface to the pool class. This class allows two - * different two different priority tasks to insert and remove items from - * the free pool. The user of the pool is expected to evaluate the pool - * condition empty before a get operation and pool condition full before a - * put operation. Methods Provided: - sci_pool_create() - - * sci_pool_initialize() - sci_pool_empty() - sci_pool_full() - - * sci_pool_get() - sci_pool_put() - * - * - */ - -#ifndef _SCI_POOL_H_ -#define _SCI_POOL_H_ - -/** - * SCI_POOL_INCREMENT() - - * - * Private operation for the pool - */ -#define SCI_POOL_INCREMENT(pool, index) \ - (((index) + 1) == (pool).size ? 0 : (index) + 1) - -/** - * SCI_POOL_CREATE() - - * - * This creates a pool structure of pool_name. The members in the pool are of - * type with number of elements equal to size. - */ -#define SCI_POOL_CREATE(pool_name, type, pool_size) \ - struct \ - { \ - u32 size; \ - u32 get; \ - u32 put; \ - type array[(pool_size) + 1]; \ - } pool_name - - -/** - * sci_pool_empty() - - * - * This macro evaluates the pool and returns true if the pool is empty. If the - * pool is empty the user should not perform any get operation on the pool. - */ -#define sci_pool_empty(pool) \ - ((pool).get == (pool).put) - -/** - * sci_pool_full() - - * - * This macro evaluates the pool and returns true if the pool is full. If the - * pool is full the user should not perform any put operation. - */ -#define sci_pool_full(pool) \ - (SCI_POOL_INCREMENT(pool, (pool).put) == (pool).get) - -/** - * sci_pool_size() - - * - * This macro returns the size of the pool created. The internal size of the - * pool is actually 1 larger then necessary in order to ensure get and put - * pointers can be written simultaneously by different users. As a result, - * this macro subtracts 1 from the internal size - */ -#define sci_pool_size(pool) \ - ((pool).size - 1) - -/** - * sci_pool_count() - - * - * This macro indicates the number of elements currently contained in the pool. - */ -#define sci_pool_count(pool) \ - (\ - sci_pool_empty((pool)) \ - ? 0 \ - : (\ - sci_pool_full((pool)) \ - ? sci_pool_size((pool)) \ - : (\ - (pool).get > (pool).put \ - ? ((pool).size - (pool).get + (pool).put) \ - : ((pool).put - (pool).get) \ - ) \ - ) \ - ) - -/** - * sci_pool_initialize() - - * - * This macro initializes the pool to an empty condition. - */ -#define sci_pool_initialize(pool) \ - { \ - (pool).size = (sizeof((pool).array) / sizeof((pool).array[0])); \ - (pool).get = 0; \ - (pool).put = 0; \ - } - -/** - * sci_pool_get() - - * - * This macro will get the next free element from the pool. This should only be - * called if the pool is not empty. - */ -#define sci_pool_get(pool, my_value) \ - { \ - (my_value) = (pool).array[(pool).get]; \ - (pool).get = SCI_POOL_INCREMENT((pool), (pool).get); \ - } - -/** - * sci_pool_put() - - * - * This macro will put the value into the pool. This should only be called if - * the pool is not full. - */ -#define sci_pool_put(pool, value) \ - { \ - (pool).array[(pool).put] = (value); \ - (pool).put = SCI_POOL_INCREMENT((pool), (pool).put); \ - } - -/** - * sci_pool_erase() - - * - * This macro will search the pool and remove any elements in the pool matching - * the supplied value. This method can only be utilized on pools - */ -#define sci_pool_erase(pool, type, value) \ - { \ - type tmp_value; \ - u32 index; \ - u32 element_count = sci_pool_count((pool)); \ - \ - for (index = 0; index < element_count; index++) { \ - sci_pool_get((pool), tmp_value); \ - if (tmp_value != (value)) \ - sci_pool_put((pool), tmp_value); \ - } \ - } - -#endif /* _SCI_POOL_H_ */ diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c index 0101fec..595d8da 100644 --- a/drivers/scsi/isci/core/sci_util.c +++ b/drivers/scsi/isci/core/sci_util.c @@ -55,7 +55,6 @@ #include #include "sci_util.h" -#include "sci_environment.h" #include "request.h" void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h index 8b8c925..15e7744 100644 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ b/drivers/scsi/isci/core/scic_config_parameters.h @@ -229,44 +229,6 @@ union scic_oem_parameters { struct scic_sds_oem_params sds1; }; -/** - * scic_user_parameters_set() - This method allows the user to attempt to - * change the user parameters utilized by the controller. - * @controller: This parameter specifies the controller on which to set the - * user parameters. - * @user_parameters: This parameter specifies the USER_PARAMETERS object - * containing the potential new values. - * - * Indicate if the update of the user parameters was successful. SCI_SUCCESS - * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE - * This value is returned if the attempt to change the user parameter failed, - * because changing one of the parameters is not currently allowed. - * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user - * supplied an invalid interrupt coalescence time, spin up delay interval, etc. - */ -enum sci_status scic_user_parameters_set( - struct scic_sds_controller *controller, - union scic_user_parameters *user_parameters); - -/** - * scic_oem_parameters_set() - This method allows the user to attempt to change - * the OEM parameters utilized by the controller. - * @controller: This parameter specifies the controller on which to set the - * user parameters. - * @oem_parameters: This parameter specifies the OEM parameters object - * containing the potential new values. - * - * Indicate if the update of the user parameters was successful. SCI_SUCCESS - * This value is returned if the operation succeeded. SCI_FAILURE_INVALID_STATE - * This value is returned if the attempt to change the user parameter failed, - * because changing one of the parameters is not currently allowed. - * SCI_FAILURE_INVALID_PARAMETER_VALUE This value is returned if the user - * supplied an unsupported value for one of the OEM parameters. - */ -enum sci_status scic_oem_parameters_set( - struct scic_sds_controller *controller, - union scic_oem_parameters *oem_parameters); - int scic_oem_parameters_validate(struct scic_sds_oem_params *oem); /** diff --git a/drivers/scsi/isci/core/scic_controller.h b/drivers/scsi/isci/core/scic_controller.h deleted file mode 100644 index bd08f30..0000000 --- a/drivers/scsi/isci/core/scic_controller.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_CONTROLLER_H_ -#define _SCIC_CONTROLLER_H_ - -#include "scic_config_parameters.h" - -struct scic_sds_request; -struct scic_sds_phy; -struct scic_sds_port; -struct scic_sds_remote_device; - -enum sci_status scic_controller_construct(struct scic_sds_controller *c, - void __iomem *scu_base, - void __iomem *smu_base); - -void scic_controller_enable_interrupts( - struct scic_sds_controller *controller); - -void scic_controller_disable_interrupts( - struct scic_sds_controller *controller); - -enum sci_status scic_controller_initialize( - struct scic_sds_controller *controller); - -u32 scic_controller_get_suggested_start_timeout( - struct scic_sds_controller *controller); - -enum sci_status scic_controller_start( - struct scic_sds_controller *controller, - u32 timeout); - -enum sci_status scic_controller_stop( - struct scic_sds_controller *controller, - u32 timeout); - -enum sci_status scic_controller_reset( - struct scic_sds_controller *controller); - -enum sci_status scic_controller_start_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request, - u16 io_tag); - -enum sci_task_status scic_controller_start_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *task_request, - u16 io_tag); - -enum sci_status scic_controller_terminate_request( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *request); - -enum sci_status scic_controller_complete_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request); - -enum sci_status scic_controller_get_phy_handle( - struct scic_sds_controller *controller, - u8 phy_index, - struct scic_sds_phy **phy_handle); - -u16 scic_controller_allocate_io_tag( - struct scic_sds_controller *controller); - -enum sci_status scic_controller_free_io_tag( - struct scic_sds_controller *controller, - u16 io_tag); - -struct device; -struct scic_sds_controller *scic_controller_alloc(struct device *dev); -int scic_controller_mem_init(struct scic_sds_controller *scic); -#endif /* _SCIC_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c deleted file mode 100644 index e77265b..0000000 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ /dev/null @@ -1,2973 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include -#include "scic_controller.h" -#include "scic_phy.h" -#include "scic_port.h" -#include "scic_sds_controller.h" -#include "scu_registers.h" -#include "scic_sds_phy.h" -#include "scic_sds_port_configuration_agent.h" -#include "scic_sds_port.h" -#include "remote_device.h" -#include "scic_sds_request.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_completion_codes.h" -#include "scu_event_codes.h" -#include "scu_remote_node_context.h" -#include "scu_task_context.h" -#include "scu_unsolicited_frame.h" -#include "timers.h" - -#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 - -/** - * smu_dcc_get_max_ports() - - * - * This macro returns the maximum number of logical ports supported by the - * hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_ports(dcc_value) \ - (\ - (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \ - ) - -/** - * smu_dcc_get_max_task_context() - - * - * This macro returns the maximum number of task contexts supported by the - * hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_task_context(dcc_value) \ - (\ - (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \ - ) - -/** - * smu_dcc_get_max_remote_node_context() - - * - * This macro returns the maximum number of remote node contexts supported by - * the hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_remote_node_context(dcc_value) \ - (\ - (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \ - ) - - -static void scic_sds_controller_power_control_timer_handler( - void *controller); -#define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT 3 -#define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT 3 - -/** - * - * - * The number of milliseconds to wait for a phy to start. - */ -#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 - -/** - * - * - * The number of milliseconds to wait while a given phy is consuming power - * before allowing another set of phys to consume power. Ultimately, this will - * be specified by OEM parameter. - */ -#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500 - -/** - * COMPLETION_QUEUE_CYCLE_BIT() - - * - * This macro will return the cycle bit of the completion queue entry - */ -#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000) - -/** - * NORMALIZE_GET_POINTER() - - * - * This macro will normalize the completion queue get pointer so its value can - * be used as an index into an array - */ -#define NORMALIZE_GET_POINTER(x) \ - ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK) - -/** - * NORMALIZE_PUT_POINTER() - - * - * This macro will normalize the completion queue put pointer so its value can - * be used as an array inde - */ -#define NORMALIZE_PUT_POINTER(x) \ - ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK) - - -/** - * NORMALIZE_GET_POINTER_CYCLE_BIT() - - * - * This macro will normalize the completion queue cycle pointer so it matches - * the completion queue cycle bit - */ -#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \ - ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT)) - -/** - * NORMALIZE_EVENT_POINTER() - - * - * This macro will normalize the completion queue event entry so its value can - * be used as an index. - */ -#define NORMALIZE_EVENT_POINTER(x) \ - (\ - ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \ - >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \ - ) - -/** - * INCREMENT_COMPLETION_QUEUE_GET() - - * - * This macro will increment the controllers completion queue index value and - * possibly toggle the cycle bit if the completion queue index wraps back to 0. - */ -#define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \ - INCREMENT_QUEUE_GET(\ - (index), \ - (cycle), \ - (controller)->completion_queue_entries, \ - SMU_CQGR_CYCLE_BIT \ - ) - -/** - * INCREMENT_EVENT_QUEUE_GET() - - * - * This macro will increment the controllers event queue index value and - * possibly toggle the event cycle bit if the event queue index wraps back to 0. - */ -#define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \ - INCREMENT_QUEUE_GET(\ - (index), \ - (cycle), \ - (controller)->completion_event_entries, \ - SMU_CQGR_EVENT_CYCLE_BIT \ - ) - -static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - scic->power_control.timer = isci_timer_create(ihost, - scic, - scic_sds_controller_power_control_timer_handler); - - memset(scic->power_control.requesters, 0, - sizeof(scic->power_control.requesters)); - - scic->power_control.phys_waiting = 0; - scic->power_control.phys_granted_power = 0; -} - -int scic_controller_mem_init(struct scic_sds_controller *scic) -{ - struct device *dev = scic_to_dev(scic); - dma_addr_t dma_handle; - enum sci_status result; - - scic->completion_queue = dmam_alloc_coherent(dev, - scic->completion_queue_entries * sizeof(u32), - &dma_handle, GFP_KERNEL); - if (!scic->completion_queue) - return -ENOMEM; - - writel(lower_32_bits(dma_handle), - &scic->smu_registers->completion_queue_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->completion_queue_upper); - - scic->remote_node_context_table = dmam_alloc_coherent(dev, - scic->remote_node_entries * - sizeof(union scu_remote_node_context), - &dma_handle, GFP_KERNEL); - if (!scic->remote_node_context_table) - return -ENOMEM; - - writel(lower_32_bits(dma_handle), - &scic->smu_registers->remote_node_context_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->remote_node_context_upper); - - scic->task_context_table = dmam_alloc_coherent(dev, - scic->task_context_entries * - sizeof(struct scu_task_context), - &dma_handle, GFP_KERNEL); - if (!scic->task_context_table) - return -ENOMEM; - - writel(lower_32_bits(dma_handle), - &scic->smu_registers->host_task_table_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->host_task_table_upper); - - result = scic_sds_unsolicited_frame_control_construct(scic); - if (result) - return result; - - /* - * Inform the silicon as to the location of the UF headers and - * address table. - */ - writel(lower_32_bits(scic->uf_control.headers.physical_address), - &scic->scu_registers->sdma.uf_header_base_address_lower); - writel(upper_32_bits(scic->uf_control.headers.physical_address), - &scic->scu_registers->sdma.uf_header_base_address_upper); - - writel(lower_32_bits(scic->uf_control.address_table.physical_address), - &scic->scu_registers->sdma.uf_address_table_lower); - writel(upper_32_bits(scic->uf_control.address_table.physical_address), - &scic->scu_registers->sdma.uf_address_table_upper); - - return 0; -} - -/** - * This method initializes the task context data for the controller. - * @scic: - * - */ -static void -scic_sds_controller_assign_task_entries(struct scic_sds_controller *controller) -{ - u32 task_assignment; - - /* - * Assign all the TCs to function 0 - * TODO: Do we actually need to read this register to write it back? - */ - - task_assignment = - readl(&controller->smu_registers->task_context_assignment[0]); - - task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | - (SMU_TCA_GEN_VAL(ENDING, controller->task_context_entries - 1)) | - (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); - - writel(task_assignment, - &controller->smu_registers->task_context_assignment[0]); - -} - -/** - * This method initializes the hardware completion queue. - * - * - */ -static void scic_sds_controller_initialize_completion_queue( - struct scic_sds_controller *scic) -{ - u32 index; - u32 completion_queue_control_value; - u32 completion_queue_get_value; - u32 completion_queue_put_value; - - scic->completion_queue_get = 0; - - completion_queue_control_value = ( - SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1) - | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1) - ); - - writel(completion_queue_control_value, - &scic->smu_registers->completion_queue_control); - - - /* Set the completion queue get pointer and enable the queue */ - completion_queue_get_value = ( - (SMU_CQGR_GEN_VAL(POINTER, 0)) - | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0)) - | (SMU_CQGR_GEN_BIT(ENABLE)) - | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) - ); - - writel(completion_queue_get_value, - &scic->smu_registers->completion_queue_get); - - /* Set the completion queue put pointer */ - completion_queue_put_value = ( - (SMU_CQPR_GEN_VAL(POINTER, 0)) - | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) - ); - - writel(completion_queue_put_value, - &scic->smu_registers->completion_queue_put); - - /* Initialize the cycle bit of the completion queue entries */ - for (index = 0; index < scic->completion_queue_entries; index++) { - /* - * If get.cycle_bit != completion_queue.cycle_bit - * its not a valid completion queue entry - * so at system start all entries are invalid */ - scic->completion_queue[index] = 0x80000000; - } -} - -/** - * This method initializes the hardware unsolicited frame queue. - * - * - */ -static void scic_sds_controller_initialize_unsolicited_frame_queue( - struct scic_sds_controller *scic) -{ - u32 frame_queue_control_value; - u32 frame_queue_get_value; - u32 frame_queue_put_value; - - /* Write the queue size */ - frame_queue_control_value = - SCU_UFQC_GEN_VAL(QUEUE_SIZE, - scic->uf_control.address_table.count); - - writel(frame_queue_control_value, - &scic->scu_registers->sdma.unsolicited_frame_queue_control); - - /* Setup the get pointer for the unsolicited frame queue */ - frame_queue_get_value = ( - SCU_UFQGP_GEN_VAL(POINTER, 0) - | SCU_UFQGP_GEN_BIT(ENABLE_BIT) - ); - - writel(frame_queue_get_value, - &scic->scu_registers->sdma.unsolicited_frame_get_pointer); - /* Setup the put pointer for the unsolicited frame queue */ - frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); - writel(frame_queue_put_value, - &scic->scu_registers->sdma.unsolicited_frame_put_pointer); -} - -/** - * This method enables the hardware port task scheduler. - * - * - */ -static void scic_sds_controller_enable_port_task_scheduler( - struct scic_sds_controller *scic) -{ - u32 port_task_scheduler_value; - - port_task_scheduler_value = - readl(&scic->scu_registers->peg0.ptsg.control); - port_task_scheduler_value |= - (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | - SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); - writel(port_task_scheduler_value, - &scic->scu_registers->peg0.ptsg.control); -} - -/** - * - * - * This macro is used to delay between writes to the AFE registers during AFE - * initialization. - */ -#define AFE_REGISTER_WRITE_DELAY 10 - -/* Initialize the AFE for this phy index. We need to read the AFE setup from - * the OEM parameters none - */ -static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) -{ - const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; - u32 afe_status; - u32 phy_id; - - /* Clear DFX Status registers */ - writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - - if (is_b0()) { - /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement - * Timer, PM Stagger Timer */ - writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - /* Configure bias currents to normal */ - if (is_a0()) - writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); - else if (is_a2()) - writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); - else if (is_b0()) - writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control); - - udelay(AFE_REGISTER_WRITE_DELAY); - - /* Enable PLL */ - if (is_b0()) - writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0); - else - writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0); - - udelay(AFE_REGISTER_WRITE_DELAY); - - /* Wait for the PLL to lock */ - do { - afe_status = readl(&scic->scu_registers->afe.afe_common_block_status); - udelay(AFE_REGISTER_WRITE_DELAY); - } while ((afe_status & 0x00001000) == 0); - - if (is_a0() || is_a2()) { - /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ - writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { - const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; - - if (is_b0()) { - /* Configure transmitter SSC parameters */ - writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); - udelay(AFE_REGISTER_WRITE_DELAY); - } else { - /* - * All defaults, except the Receive Word Alignament/Comma Detect - * Enable....(0xe800) */ - writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - if (is_a0()) - writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - else if (is_a2()) - writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - else { - /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - udelay(AFE_REGISTER_WRITE_DELAY); - - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - } - udelay(AFE_REGISTER_WRITE_DELAY); - - if (is_a0() || is_a2()) { - /* Enable TX equalization (0xe824) */ - writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - /* - * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), - * RDD=0x0(RX Detect Enabled) ....(0xe800) */ - writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - - /* Leave DFE/FFE on */ - if (is_a0()) - writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - else if (is_a2()) - writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - else { - writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - /* Enable TX equalization (0xe824) */ - writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); - } - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(oem_phy->afe_tx_amp_control0, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(oem_phy->afe_tx_amp_control1, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(oem_phy->afe_tx_amp_control2, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); - udelay(AFE_REGISTER_WRITE_DELAY); - - writel(oem_phy->afe_tx_amp_control3, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); - udelay(AFE_REGISTER_WRITE_DELAY); - } - - /* Transfer control to the PEs */ - writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0); - udelay(AFE_REGISTER_WRITE_DELAY); -} - -/* - * ****************************************************************************- - * * SCIC SDS Controller Internal Start/Stop Routines - * ****************************************************************************- */ - - -/** - * This method will attempt to transition into the ready state for the - * controller and indicate that the controller start operation has completed - * if all criteria are met. - * @scic: This parameter indicates the controller object for which - * to transition to ready. - * @status: This parameter indicates the status value to be pass into the call - * to scic_cb_controller_start_complete(). - * - * none. - */ -static void scic_sds_controller_transition_to_ready( - struct scic_sds_controller *scic, - enum sci_status status) -{ - struct isci_host *ihost = scic_to_ihost(scic); - - if (scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_STARTING) { - /* - * We move into the ready state, because some of the phys/ports - * may be up and operational. - */ - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_READY); - - isci_host_start_complete(ihost, status); - } -} - -static void scic_sds_controller_timeout_handler(void *_scic) -{ - struct scic_sds_controller *scic = _scic; - struct isci_host *ihost = scic_to_ihost(scic); - struct sci_base_state_machine *sm = &scic->state_machine; - - if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) - scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); - else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) { - sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED); - isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); - } else /* / @todo Now what do we want to do in this case? */ - dev_err(scic_to_dev(scic), - "%s: Controller timer fired when controller was not " - "in a state being timed.\n", - __func__); -} - -static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) -{ - u32 index; - enum sci_status port_status; - enum sci_status status = SCI_SUCCESS; - struct isci_host *ihost = scic_to_ihost(scic); - - for (index = 0; index < scic->logical_port_entries; index++) { - struct scic_sds_port *sci_port = &ihost->ports[index].sci; - scic_sds_port_handler_t stop; - - stop = sci_port->state_handlers->stop_handler; - port_status = stop(sci_port); - - if ((port_status != SCI_SUCCESS) && - (port_status != SCI_FAILURE_INVALID_STATE)) { - status = SCI_FAILURE; - - dev_warn(scic_to_dev(scic), - "%s: Controller stop operation failed to " - "stop port %d because of status %d.\n", - __func__, - sci_port->logical_port_index, - port_status); - } - } - - return status; -} - -static inline void scic_sds_controller_phy_timer_start( - struct scic_sds_controller *scic) -{ - isci_timer_start(scic->phy_startup_timer, - SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); - - scic->phy_startup_timer_pending = true; -} - -static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic) -{ - isci_timer_stop(scic->phy_startup_timer); - - scic->phy_startup_timer_pending = false; -} - -/** - * scic_sds_controller_start_next_phy - start phy - * @scic: controller - * - * If all the phys have been started, then attempt to transition the - * controller to the READY state and inform the user - * (scic_cb_controller_start_complete()). - */ -static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; - struct scic_sds_phy *sci_phy; - enum sci_status status; - - status = SCI_SUCCESS; - - if (scic->phy_startup_timer_pending) - return status; - - if (scic->next_phy_to_start >= SCI_MAX_PHYS) { - bool is_controller_start_complete = true; - u32 state; - u8 index; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - sci_phy = &ihost->phys[index].sci; - state = sci_phy->state_machine.current_state_id; - - if (!scic_sds_phy_get_port(sci_phy)) - continue; - - /* The controller start operation is complete iff: - * - all links have been given an opportunity to start - * - have no indication of a connected device - * - have an indication of a connected device and it has - * finished the link training process. - */ - if ((sci_phy->is_in_link_training == false && - state == SCI_BASE_PHY_STATE_INITIAL) || - (sci_phy->is_in_link_training == false && - state == SCI_BASE_PHY_STATE_STOPPED) || - (sci_phy->is_in_link_training == true && - state == SCI_BASE_PHY_STATE_STARTING)) { - is_controller_start_complete = false; - break; - } - } - - /* - * The controller has successfully finished the start process. - * Inform the SCI Core user and transition to the READY state. */ - if (is_controller_start_complete == true) { - scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS); - scic_sds_controller_phy_timer_stop(scic); - } - } else { - sci_phy = &ihost->phys[scic->next_phy_to_start].sci; - - if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - if (scic_sds_phy_get_port(sci_phy) == NULL) { - scic->next_phy_to_start++; - - /* Caution recursion ahead be forwarned - * - * The PHY was never added to a PORT in MPC mode - * so start the next phy in sequence This phy - * will never go link up and will not draw power - * the OEM parameters either configured the phy - * incorrectly for the PORT or it was never - * assigned to a PORT - */ - return scic_sds_controller_start_next_phy(scic); - } - } - - status = scic_sds_phy_start(sci_phy); - - if (status == SCI_SUCCESS) { - scic_sds_controller_phy_timer_start(scic); - } else { - dev_warn(scic_to_dev(scic), - "%s: Controller stop operation failed " - "to stop phy %d because of status " - "%d.\n", - __func__, - ihost->phys[scic->next_phy_to_start].sci.phy_index, - status); - } - - scic->next_phy_to_start++; - } - - return status; -} - -static void scic_sds_controller_phy_startup_timeout_handler(void *_scic) -{ - struct scic_sds_controller *scic = _scic; - enum sci_status status; - - scic->phy_startup_timer_pending = false; - status = SCI_FAILURE; - while (status != SCI_SUCCESS) - status = scic_sds_controller_start_next_phy(scic); -} - -static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - - scic->phy_startup_timer = isci_timer_create(ihost, - scic, - scic_sds_controller_phy_startup_timeout_handler); - - if (scic->phy_startup_timer == NULL) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - else { - scic->next_phy_to_start = 0; - scic->phy_startup_timer_pending = false; - } - - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic) -{ - u32 index; - enum sci_status status; - enum sci_status phy_status; - struct isci_host *ihost = scic_to_ihost(scic); - - status = SCI_SUCCESS; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - phy_status = scic_sds_phy_stop(&ihost->phys[index].sci); - - if (phy_status != SCI_SUCCESS && - phy_status != SCI_FAILURE_INVALID_STATE) { - status = SCI_FAILURE; - - dev_warn(scic_to_dev(scic), - "%s: Controller stop operation failed to stop " - "phy %d because of status %d.\n", - __func__, - ihost->phys[index].sci.phy_index, phy_status); - } - } - - return status; -} - -static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic) -{ - u32 index; - enum sci_status status; - enum sci_status device_status; - - status = SCI_SUCCESS; - - for (index = 0; index < scic->remote_node_entries; index++) { - if (scic->device_table[index] != NULL) { - /* / @todo What timeout value do we want to provide to this request? */ - device_status = scic_remote_device_stop(scic->device_table[index], 0); - - if ((device_status != SCI_SUCCESS) && - (device_status != SCI_FAILURE_INVALID_STATE)) { - dev_warn(scic_to_dev(scic), - "%s: Controller stop operation failed " - "to stop device 0x%p because of " - "status %d.\n", - __func__, - scic->device_table[index], device_status); - } - } - } - - return status; -} - -static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic) -{ - isci_timer_start(scic->power_control.timer, - SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); - - scic->power_control.timer_started = true; -} - -static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic) -{ - if (scic->power_control.timer_started) { - isci_timer_stop(scic->power_control.timer); - scic->power_control.timer_started = false; - } -} - -static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic) -{ - scic_sds_controller_power_control_timer_stop(scic); - scic_sds_controller_power_control_timer_start(scic); -} - -static void scic_sds_controller_power_control_timer_handler( - void *controller) -{ - struct scic_sds_controller *scic; - - scic = (struct scic_sds_controller *)controller; - - scic->power_control.phys_granted_power = 0; - - if (scic->power_control.phys_waiting == 0) { - scic->power_control.timer_started = false; - } else { - struct scic_sds_phy *sci_phy = NULL; - u8 i; - - for (i = 0; - (i < SCI_MAX_PHYS) - && (scic->power_control.phys_waiting != 0); - i++) { - if (scic->power_control.requesters[i] != NULL) { - if (scic->power_control.phys_granted_power < - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { - sci_phy = scic->power_control.requesters[i]; - scic->power_control.requesters[i] = NULL; - scic->power_control.phys_waiting--; - scic->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(sci_phy); - } else { - break; - } - } - } - - /* - * It doesn't matter if the power list is empty, we need to start the - * timer in case another phy becomes ready. - */ - scic_sds_controller_power_control_timer_start(scic); - } -} - -/** - * This method inserts the phy in the stagger spinup control queue. - * @scic: - * - * - */ -void scic_sds_controller_power_control_queue_insert( - struct scic_sds_controller *scic, - struct scic_sds_phy *sci_phy) -{ - BUG_ON(sci_phy == NULL); - - if (scic->power_control.phys_granted_power < - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { - scic->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(sci_phy); - - /* - * stop and start the power_control timer. When the timer fires, the - * no_of_phys_granted_power will be set to 0 - */ - scic_sds_controller_power_control_timer_restart(scic); - } else { - /* Add the phy in the waiting list */ - scic->power_control.requesters[sci_phy->phy_index] = sci_phy; - scic->power_control.phys_waiting++; - } -} - -/** - * This method removes the phy from the stagger spinup control queue. - * @scic: - * - * - */ -void scic_sds_controller_power_control_queue_remove( - struct scic_sds_controller *scic, - struct scic_sds_phy *sci_phy) -{ - BUG_ON(sci_phy == NULL); - - if (scic->power_control.requesters[sci_phy->phy_index] != NULL) { - scic->power_control.phys_waiting--; - } - - scic->power_control.requesters[sci_phy->phy_index] = NULL; -} - -/* - * ****************************************************************************- - * * SCIC SDS Controller Completion Routines - * ****************************************************************************- */ - -/** - * This method returns a true value if the completion queue has entries that - * can be processed - * @scic: - * - * bool true if the completion queue has entries to process false if the - * completion queue has no entries to process - */ -static bool scic_sds_controller_completion_queue_has_entries( - struct scic_sds_controller *scic) -{ - u32 get_value = scic->completion_queue_get; - u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; - - if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) == - COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])) - return true; - - return false; -} - -/** - * This method processes a task completion notification. This is called from - * within the controller completion handler. - * @scic: - * @completion_entry: - * - */ -static void scic_sds_controller_task_completion( - struct scic_sds_controller *scic, - u32 completion_entry) -{ - u32 index; - struct scic_sds_request *io_request; - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - io_request = scic->io_request_table[index]; - - /* Make sure that we really want to process this IO request */ - if ( - (io_request != NULL) - && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) - && ( - scic_sds_io_tag_get_sequence(io_request->io_tag) - == scic->io_request_sequence[index] - ) - ) { - /* Yep this is a valid io request pass it along to the io request handler */ - scic_sds_io_request_tc_completion(io_request, completion_entry); - } -} - -/** - * This method processes an SDMA completion event. This is called from within - * the controller completion handler. - * @scic: - * @completion_entry: - * - */ -static void scic_sds_controller_sdma_completion( - struct scic_sds_controller *scic, - u32 completion_entry) -{ - u32 index; - struct scic_sds_request *io_request; - struct scic_sds_remote_device *device; - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - - switch (scu_get_command_request_type(completion_entry)) { - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: - io_request = scic->io_request_table[index]; - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion type SDMA %x for io request " - "%p\n", - __func__, - completion_entry, - io_request); - /* @todo For a post TC operation we need to fail the IO - * request - */ - break; - - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: - device = scic->device_table[index]; - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion type SDMA %x for remote " - "device %p\n", - __func__, - completion_entry, - device); - /* @todo For a port RNC operation we need to fail the - * device - */ - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion unknown SDMA completion " - "type %x\n", - __func__, - completion_entry); - break; - - } -} - -static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic, - u32 completion_entry) -{ - u32 index; - u32 frame_index; - - struct isci_host *ihost = scic_to_ihost(scic); - struct scu_unsolicited_frame_header *frame_header; - struct scic_sds_phy *phy; - struct scic_sds_remote_device *device; - - enum sci_status result = SCI_FAILURE; - - frame_index = SCU_GET_FRAME_INDEX(completion_entry); - - frame_header = scic->uf_control.buffers.array[frame_index].header; - scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; - - if (SCU_GET_FRAME_ERROR(completion_entry)) { - /* - * / @todo If the IAF frame or SIGNATURE FIS frame has an error will - * / this cause a problem? We expect the phy initialization will - * / fail if there is an error in the frame. */ - scic_sds_controller_release_frame(scic, frame_index); - return; - } - - if (frame_header->is_address_frame) { - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - result = scic_sds_phy_frame_handler(phy, frame_index); - } else { - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - - if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - /* - * This is a signature fis or a frame from a direct attached SATA - * device that has not yet been created. In either case forwared - * the frame to the PE and let it take care of the frame data. */ - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - result = scic_sds_phy_frame_handler(phy, frame_index); - } else { - if (index < scic->remote_node_entries) - device = scic->device_table[index]; - else - device = NULL; - - if (device != NULL) - result = scic_sds_remote_device_frame_handler(device, frame_index); - else - scic_sds_controller_release_frame(scic, frame_index); - } - } - - if (result != SCI_SUCCESS) { - /* - * / @todo Is there any reason to report some additional error message - * / when we get this failure notifiction? */ - } -} - -static void scic_sds_controller_event_completion(struct scic_sds_controller *scic, - u32 completion_entry) -{ - struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_request *io_request; - struct scic_sds_remote_device *device; - struct scic_sds_phy *phy; - u32 index; - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - - switch (scu_get_event_type(completion_entry)) { - case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: - /* / @todo The driver did something wrong and we need to fix the condtion. */ - dev_err(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received SMU command error " - "0x%x\n", - __func__, - scic, - completion_entry); - break; - - case SCU_EVENT_TYPE_SMU_PCQ_ERROR: - case SCU_EVENT_TYPE_SMU_ERROR: - case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR: - /* - * / @todo This is a hardware failure and its likely that we want to - * / reset the controller. */ - dev_err(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received fatal controller " - "event 0x%x\n", - __func__, - scic, - completion_entry); - break; - - case SCU_EVENT_TYPE_TRANSPORT_ERROR: - io_request = scic->io_request_table[index]; - scic_sds_io_request_event_handler(io_request, completion_entry); - break; - - case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: - switch (scu_get_event_specifier(completion_entry)) { - case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: - case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: - io_request = scic->io_request_table[index]; - if (io_request != NULL) - scic_sds_io_request_event_handler(io_request, completion_entry); - else - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received " - "event 0x%x for io request object " - "that doesnt exist.\n", - __func__, - scic, - completion_entry); - - break; - - case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: - device = scic->device_table[index]; - if (device != NULL) - scic_sds_remote_device_event_handler(device, completion_entry); - else - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received " - "event 0x%x for remote device object " - "that doesnt exist.\n", - __func__, - scic, - completion_entry); - - break; - } - break; - - case SCU_EVENT_TYPE_BROADCAST_CHANGE: - /* - * direct the broadcast change event to the phy first and then let - * the phy redirect the broadcast change to the port object */ - case SCU_EVENT_TYPE_ERR_CNT_EVENT: - /* - * direct error counter event to the phy object since that is where - * we get the event notification. This is a type 4 event. */ - case SCU_EVENT_TYPE_OSSP_EVENT: - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - scic_sds_phy_event_handler(phy, completion_entry); - break; - - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - case SCU_EVENT_TYPE_RNC_OPS_MISC: - if (index < scic->remote_node_entries) { - device = scic->device_table[index]; - - if (device != NULL) - scic_sds_remote_device_event_handler(device, completion_entry); - } else - dev_err(scic_to_dev(scic), - "%s: SCIC Controller 0x%p received event 0x%x " - "for remote device object 0x%0x that doesnt " - "exist.\n", - __func__, - scic, - completion_entry, - index); - - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller received unknown event code %x\n", - __func__, - completion_entry); - break; - } -} - -/** - * This method is a private routine for processing the completion queue entries. - * @scic: - * - */ -static void scic_sds_controller_process_completions( - struct scic_sds_controller *scic) -{ - u32 completion_count = 0; - u32 completion_entry; - u32 get_index; - u32 get_cycle; - u32 event_index; - u32 event_cycle; - - dev_dbg(scic_to_dev(scic), - "%s: completion queue begining get:0x%08x\n", - __func__, - scic->completion_queue_get); - - /* Get the component parts of the completion queue */ - get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get); - get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get; - - event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get); - event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get; - - while ( - NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) - == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]) - ) { - completion_count++; - - completion_entry = scic->completion_queue[get_index]; - INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle); - - dev_dbg(scic_to_dev(scic), - "%s: completion queue entry:0x%08x\n", - __func__, - completion_entry); - - switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { - case SCU_COMPLETION_TYPE_TASK: - scic_sds_controller_task_completion(scic, completion_entry); - break; - - case SCU_COMPLETION_TYPE_SDMA: - scic_sds_controller_sdma_completion(scic, completion_entry); - break; - - case SCU_COMPLETION_TYPE_UFI: - scic_sds_controller_unsolicited_frame(scic, completion_entry); - break; - - case SCU_COMPLETION_TYPE_EVENT: - INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); - scic_sds_controller_event_completion(scic, completion_entry); - break; - - case SCU_COMPLETION_TYPE_NOTIFY: - /* - * Presently we do the same thing with a notify event that we do with the - * other event codes. */ - INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); - scic_sds_controller_event_completion(scic, completion_entry); - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller received unknown " - "completion type %x\n", - __func__, - completion_entry); - break; - } - } - - /* Update the get register if we completed one or more entries */ - if (completion_count > 0) { - scic->completion_queue_get = - SMU_CQGR_GEN_BIT(ENABLE) | - SMU_CQGR_GEN_BIT(EVENT_ENABLE) | - event_cycle | - SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) | - get_cycle | - SMU_CQGR_GEN_VAL(POINTER, get_index); - - writel(scic->completion_queue_get, - &scic->smu_registers->completion_queue_get); - - } - - dev_dbg(scic_to_dev(scic), - "%s: completion queue ending get:0x%08x\n", - __func__, - scic->completion_queue_get); - -} - -bool scic_sds_controller_isr(struct scic_sds_controller *scic) -{ - if (scic_sds_controller_completion_queue_has_entries(scic)) { - return true; - } else { - /* - * we have a spurious interrupt it could be that we have already - * emptied the completion queue from a previous interrupt */ - writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); - - /* - * There is a race in the hardware that could cause us not to be notified - * of an interrupt completion if we do not take this step. We will mask - * then unmask the interrupts so if there is another interrupt pending - * the clearing of the interrupt source we get the next interrupt message. */ - writel(0xFF000000, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); - } - - return false; -} - -void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) -{ - /* Empty out the completion queue */ - if (scic_sds_controller_completion_queue_has_entries(scic)) - scic_sds_controller_process_completions(scic); - - /* Clear the interrupt and enable all interrupts again */ - writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); - /* Could we write the value of SMU_ISR_COMPLETION? */ - writel(0xFF000000, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); -} - -bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) -{ - u32 interrupt_status; - - interrupt_status = - readl(&scic->smu_registers->interrupt_status); - interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); - - if (interrupt_status != 0) { - /* - * There is an error interrupt pending so let it through and handle - * in the callback */ - return true; - } - - /* - * There is a race in the hardware that could cause us not to be notified - * of an interrupt completion if we do not take this step. We will mask - * then unmask the error interrupts so if there was another interrupt - * pending we will be notified. - * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ - writel(0xff, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); - - return false; -} - -void scic_sds_controller_error_handler(struct scic_sds_controller *scic) -{ - u32 interrupt_status; - - interrupt_status = - readl(&scic->smu_registers->interrupt_status); - - if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && - scic_sds_controller_completion_queue_has_entries(scic)) { - - scic_sds_controller_process_completions(scic); - writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status); - } else { - dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, - interrupt_status); - - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_FAILED); - - return; - } - - /* If we dont process any completions I am not sure that we want to do this. - * We are in the middle of a hardware fault and should probably be reset. - */ - writel(0, &scic->smu_registers->interrupt_mask); -} - - - - -void scic_sds_controller_link_up(struct scic_sds_controller *scic, - struct scic_sds_port *port, struct scic_sds_phy *phy) -{ - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STARTING: - scic_sds_controller_phy_timer_stop(scic); - scic->port_agent.link_up_handler(scic, &scic->port_agent, - port, phy); - scic_sds_controller_start_next_phy(scic); - break; - case SCI_BASE_CONTROLLER_STATE_READY: - scic->port_agent.link_up_handler(scic, &scic->port_agent, - port, phy); - break; - default: - dev_dbg(scic_to_dev(scic), - "%s: SCIC Controller linkup event from phy %d in " - "unexpected state %d\n", __func__, phy->phy_index, - scic->state_machine.current_state_id); - } -} - -void scic_sds_controller_link_down(struct scic_sds_controller *scic, - struct scic_sds_port *port, struct scic_sds_phy *phy) -{ - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STARTING: - case SCI_BASE_CONTROLLER_STATE_READY: - scic->port_agent.link_down_handler(scic, &scic->port_agent, - port, phy); - break; - default: - dev_dbg(scic_to_dev(scic), - "%s: SCIC Controller linkdown event from phy %d in " - "unexpected state %d\n", - __func__, - phy->phy_index, - scic->state_machine.current_state_id); - } -} - -/** - * This is a helper method to determine if any remote devices on this - * controller are still in the stopping state. - * - */ -static bool scic_sds_controller_has_remote_devices_stopping( - struct scic_sds_controller *controller) -{ - u32 index; - - for (index = 0; index < controller->remote_node_entries; index++) { - if ((controller->device_table[index] != NULL) && - (controller->device_table[index]->state_machine.current_state_id - == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)) - return true; - } - - return false; -} - -/** - * This method is called by the remote device to inform the controller - * object that the remote device has stopped. - */ -void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev) -{ - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_STOPPING) { - dev_dbg(scic_to_dev(scic), - "SCIC Controller 0x%p remote device stopped event " - "from device 0x%p in unexpected state %d\n", - scic, sci_dev, - scic->state_machine.current_state_id); - return; - } - - if (!scic_sds_controller_has_remote_devices_stopping(scic)) { - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STOPPED); - } -} - -/** - * This method will write to the SCU PCP register the request value. The method - * is used to suspend/resume ports, devices, and phys. - * @scic: - * - * - */ -void scic_sds_controller_post_request( - struct scic_sds_controller *scic, - u32 request) -{ - dev_dbg(scic_to_dev(scic), - "%s: SCIC Controller 0x%p post request 0x%08x\n", - __func__, - scic, - request); - - writel(request, &scic->smu_registers->post_context_port); -} - -/** - * This method will copy the soft copy of the task context into the physical - * memory accessible by the controller. - * @scic: This parameter specifies the controller for which to copy - * the task context. - * @sci_req: This parameter specifies the request for which the task - * context is being copied. - * - * After this call is made the SCIC_SDS_IO_REQUEST object will always point to - * the physical memory version of the task context. Thus, all subsequent - * updates to the task context are performed in the TC table (i.e. DMAable - * memory). none - */ -void scic_sds_controller_copy_task_context( - struct scic_sds_controller *scic, - struct scic_sds_request *sci_req) -{ - struct scu_task_context *task_context_buffer; - - task_context_buffer = scic_sds_controller_get_task_context_buffer( - scic, sci_req->io_tag); - - memcpy(task_context_buffer, - sci_req->task_context_buffer, - offsetof(struct scu_task_context, sgl_snapshot_ac)); - - /* - * Now that the soft copy of the TC has been copied into the TC - * table accessible by the silicon. Thus, any further changes to - * the TC (e.g. TC termination) occur in the appropriate location. */ - sci_req->task_context_buffer = task_context_buffer; -} - -/** - * This method returns the task context buffer for the given io tag. - * @scic: - * @io_tag: - * - * struct scu_task_context* - */ -struct scu_task_context *scic_sds_controller_get_task_context_buffer( - struct scic_sds_controller *scic, - u16 io_tag - ) { - u16 task_index = scic_sds_io_tag_get_index(io_tag); - - if (task_index < scic->task_context_entries) { - return &scic->task_context_table[task_index]; - } - - return NULL; -} - -struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, - u16 io_tag) -{ - u16 task_index; - u16 task_sequence; - - task_index = scic_sds_io_tag_get_index(io_tag); - - if (task_index < scic->task_context_entries) { - if (scic->io_request_table[task_index] != NULL) { - task_sequence = scic_sds_io_tag_get_sequence(io_tag); - - if (task_sequence == scic->io_request_sequence[task_index]) { - return scic->io_request_table[task_index]; - } - } - } - - return NULL; -} - -/** - * This method allocates remote node index and the reserves the remote node - * context space for use. This method can fail if there are no more remote - * node index available. - * @scic: This is the controller object which contains the set of - * free remote node ids - * @sci_dev: This is the device object which is requesting the a remote node - * id - * @node_id: This is the remote node id that is assinged to the device if one - * is available - * - * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote - * node index available. - */ -enum sci_status scic_sds_controller_allocate_remote_node_context( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 *node_id) -{ - u16 node_index; - u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); - - node_index = scic_sds_remote_node_table_allocate_remote_node( - &scic->available_remote_nodes, remote_node_count - ); - - if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - scic->device_table[node_index] = sci_dev; - - *node_id = node_index; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INSUFFICIENT_RESOURCES; -} - -/** - * This method frees the remote node index back to the available pool. Once - * this is done the remote node context buffer is no longer valid and can - * not be used. - * @scic: - * @sci_dev: - * @node_id: - * - */ -void scic_sds_controller_free_remote_node_context( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 node_id) -{ - u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); - - if (scic->device_table[node_id] == sci_dev) { - scic->device_table[node_id] = NULL; - - scic_sds_remote_node_table_release_remote_node_index( - &scic->available_remote_nodes, remote_node_count, node_id - ); - } -} - -/** - * This method returns the union scu_remote_node_context for the specified remote - * node id. - * @scic: - * @node_id: - * - * union scu_remote_node_context* - */ -union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct scic_sds_controller *scic, - u16 node_id - ) { - if ( - (node_id < scic->remote_node_entries) - && (scic->device_table[node_id] != NULL) - ) { - return &scic->remote_node_context_table[node_id]; - } - - return NULL; -} - -/** - * - * @resposne_buffer: This is the buffer into which the D2H register FIS will be - * constructed. - * @frame_header: This is the frame header returned by the hardware. - * @frame_buffer: This is the frame buffer returned by the hardware. - * - * This method will combind the frame header and frame buffer to create a SATA - * D2H register FIS none - */ -void scic_sds_controller_copy_sata_response( - void *response_buffer, - void *frame_header, - void *frame_buffer) -{ - memcpy(response_buffer, frame_header, sizeof(u32)); - - memcpy(response_buffer + sizeof(u32), - frame_buffer, - sizeof(struct dev_to_host_fis) - sizeof(u32)); -} - -/** - * This method releases the frame once this is done the frame is available for - * re-use by the hardware. The data contained in the frame header and frame - * buffer is no longer valid. The UF queue get pointer is only updated if UF - * control indicates this is appropriate. - * @scic: - * @frame_index: - * - */ -void scic_sds_controller_release_frame( - struct scic_sds_controller *scic, - u32 frame_index) -{ - if (scic_sds_unsolicited_frame_control_release_frame( - &scic->uf_control, frame_index) == true) - writel(scic->uf_control.get, - &scic->scu_registers->sdma.unsolicited_frame_get_pointer); -} - -/** - * This method sets user parameters and OEM parameters to default values. - * Users can override these values utilizing the scic_user_parameters_set() - * and scic_oem_parameters_set() methods. - * @scic: This parameter specifies the controller for which to set the - * configuration parameters to their default values. - * - */ -static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - u16 index; - - /* Default to APC mode. */ - scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; - - /* Default to APC mode. */ - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1; - - /* Default to no SSC operation. */ - scic->oem_parameters.sds1.controller.do_enable_ssc = false; - - /* Initialize all of the port parameter information to narrow ports. */ - for (index = 0; index < SCI_MAX_PORTS; index++) { - scic->oem_parameters.sds1.ports[index].phy_mask = 0; - } - - /* Initialize all of the phy parameter information. */ - for (index = 0; index < SCI_MAX_PHYS; index++) { - /* Default to 6G (i.e. Gen 3) for now. */ - scic->user_parameters.sds1.phys[index].max_speed_generation = 3; - - /* the frequencies cannot be 0 */ - scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; - scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff; - scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; - - /* - * Previous Vitesse based expanders had a arbitration issue that - * is worked around by having the upper 32-bits of SAS address - * with a value greater then the Vitesse company identifier. - * Hence, usage of 0x5FCFFFFF. */ - scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id; - scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; - } - - scic->user_parameters.sds1.stp_inactivity_timeout = 5; - scic->user_parameters.sds1.ssp_inactivity_timeout = 5; - scic->user_parameters.sds1.stp_max_occupancy_timeout = 5; - scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20; - scic->user_parameters.sds1.no_outbound_task_timeout = 20; -} - -/** - * scic_controller_get_suggested_start_timeout() - This method returns the - * suggested scic_controller_start() timeout amount. The user is free to - * use any timeout value, but this method provides the suggested minimum - * start timeout value. The returned value is based upon empirical - * information determined as a result of interoperability testing. - * @controller: the handle to the controller object for which to return the - * suggested start timeout. - * - * This method returns the number of milliseconds for the suggested start - * operation timeout. - */ -u32 scic_controller_get_suggested_start_timeout( - struct scic_sds_controller *sc) -{ - /* Validate the user supplied parameters. */ - if (sc == NULL) - return 0; - - /* - * The suggested minimum timeout value for a controller start operation: - * - * Signature FIS Timeout - * + Phy Start Timeout - * + Number of Phy Spin Up Intervals - * --------------------------------- - * Number of milliseconds for the controller start operation. - * - * NOTE: The number of phy spin up intervals will be equivalent - * to the number of phys divided by the number phys allowed - * per interval - 1 (once OEM parameters are supported). - * Currently we assume only 1 phy per interval. */ - - return SCIC_SDS_SIGNATURE_FIS_TIMEOUT - + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT - + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); -} - -/** - * scic_controller_stop() - This method will stop an individual controller - * object.This method will invoke the associated user callback upon - * completion. The completion callback is called when the following - * conditions are met: -# the method return status is SCI_SUCCESS. -# the - * controller has been quiesced. This method will ensure that all IO - * requests are quiesced, phys are stopped, and all additional operation by - * the hardware is halted. - * @controller: the handle to the controller object to stop. - * @timeout: This parameter specifies the number of milliseconds in which the - * stop operation should complete. - * - * The controller must be in the STARTED or STOPPED state. Indicate if the - * controller stop method succeeded or failed in some way. SCI_SUCCESS if the - * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the - * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the - * controller is not either in the STARTED or STOPPED states. - */ -enum sci_status scic_controller_stop( - struct scic_sds_controller *scic, - u32 timeout) -{ - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), - "SCIC Controller stop operation requested in " - "invalid state\n"); - return SCI_FAILURE_INVALID_STATE; - } - - isci_timer_start(scic->timeout_timer, timeout); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STOPPING); - return SCI_SUCCESS; -} - -/** - * scic_controller_reset() - This method will reset the supplied core - * controller regardless of the state of said controller. This operation is - * considered destructive. In other words, all current operations are wiped - * out. No IO completions for outstanding devices occur. Outstanding IO - * requests are not aborted or completed at the actual remote device. - * @controller: the handle to the controller object to reset. - * - * Indicate if the controller reset method succeeded or failed in some way. - * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if - * the controller reset operation is unable to complete. - */ -enum sci_status scic_controller_reset( - struct scic_sds_controller *scic) -{ - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_RESET: - case SCI_BASE_CONTROLLER_STATE_READY: - case SCI_BASE_CONTROLLER_STATE_STOPPED: - case SCI_BASE_CONTROLLER_STATE_FAILED: - /* - * The reset operation is not a graceful cleanup, just - * perform the state transition. - */ - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESETTING); - return SCI_SUCCESS; - default: - dev_warn(scic_to_dev(scic), - "SCIC Controller reset operation requested in " - "invalid state\n"); - return SCI_FAILURE_INVALID_STATE; - } -} - -/** - * scic_controller_start_io() - This method is called by the SCI user to - * send/start an IO request. If the method invocation is successful, then - * the IO request has been queued to the hardware for processing. - * @controller: the handle to the controller object for which to start an IO - * request. - * @remote_device: the handle to the remote device object for which to start an - * IO request. - * @io_request: the handle to the io request object to start. - * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. This parameter is optional. - * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value - * for this parameter. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a - * result, it is expected the user will have set the NCQ tag field in the host - * to device register FIS prior to calling this method. There is also a - * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking - * the scic_controller_start_io() method. scic_controller_allocate_tag() for - * more information on allocating a tag. Indicate if the controller - * successfully started the IO request. SCI_SUCCESS if the IO request was - * successfully started. Determine the failure situations and return values. - */ -enum sci_status scic_controller_start_io( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *req, - u16 io_tag) -{ - enum sci_status status; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), "invalid state to start I/O"); - return SCI_FAILURE_INVALID_STATE; - } - - status = scic_sds_remote_device_start_io(scic, rdev, req); - if (status != SCI_SUCCESS) - return status; - - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; - scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); - return SCI_SUCCESS; -} - -/** - * scic_controller_terminate_request() - This method is called by the SCI Core - * user to terminate an ongoing (i.e. started) core IO request. This does - * not abort the IO request at the target, but rather removes the IO request - * from the host controller. - * @controller: the handle to the controller object for which to terminate a - * request. - * @remote_device: the handle to the remote device object for which to - * terminate a request. - * @request: the handle to the io or task management request object to - * terminate. - * - * Indicate if the controller successfully began the terminate process for the - * IO request. SCI_SUCCESS if the terminate process was successfully started - * for the request. Determine the failure situations and return values. - */ -enum sci_status scic_controller_terminate_request( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *req) -{ - enum sci_status status; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), - "invalid state to terminate request\n"); - return SCI_FAILURE_INVALID_STATE; - } - - status = scic_sds_io_request_terminate(req); - if (status != SCI_SUCCESS) - return status; - - /* - * Utilize the original post context command and or in the POST_TC_ABORT - * request sub-type. - */ - scic_sds_controller_post_request(scic, - scic_sds_request_get_post_context(req) | - SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); - return SCI_SUCCESS; -} - -/** - * scic_controller_complete_io() - This method will perform core specific - * completion operations for an IO request. After this method is invoked, - * the user should consider the IO request as invalid until it is properly - * reused (i.e. re-constructed). - * @controller: The handle to the controller object for which to complete the - * IO request. - * @remote_device: The handle to the remote device object for which to complete - * the IO request. - * @io_request: the handle to the io request object to complete. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI - * Core user, using the scic_controller_allocate_io_tag() method, then it is - * the responsibility of the caller to invoke the scic_controller_free_io_tag() - * method to free the tag (i.e. this method will not free the IO tag). Indicate - * if the controller successfully completed the IO request. SCI_SUCCESS if the - * completion process was successful. - */ -enum sci_status scic_controller_complete_io( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *request) -{ - enum sci_status status; - u16 index; - - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STOPPING: - /* XXX: Implement this function */ - return SCI_FAILURE; - case SCI_BASE_CONTROLLER_STATE_READY: - status = scic_sds_remote_device_complete_io(scic, rdev, request); - if (status != SCI_SUCCESS) - return status; - - index = scic_sds_io_tag_get_index(request->io_tag); - scic->io_request_table[index] = NULL; - return SCI_SUCCESS; - default: - dev_warn(scic_to_dev(scic), "invalid state to complete I/O"); - return SCI_FAILURE_INVALID_STATE; - } - -} - -enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) -{ - struct scic_sds_controller *scic = sci_req->owning_controller; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), "invalid state to continue I/O"); - return SCI_FAILURE_INVALID_STATE; - } - - scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req; - scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req)); - return SCI_SUCCESS; -} - -/** - * scic_controller_start_task() - This method is called by the SCIC user to - * send/start a framework task management request. - * @controller: the handle to the controller object for which to start the task - * management request. - * @remote_device: the handle to the remote device object for which to start - * the task management request. - * @task_request: the handle to the task request object to start. - * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. Note this not the io_tag - * of the request being managed. It is to be utilized for the task request - * itself. This parameter is optional. The user is allowed to supply - * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - The user must synchronize this task with completion - * queue processing. If they are not synchronized then it is possible for the - * io requests that are being managed by the task request can complete before - * starting the task request. scic_controller_allocate_tag() for more - * information on allocating a tag. Indicate if the controller successfully - * started the IO request. SCI_TASK_SUCCESS if the task request was - * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is - * returned if there is/are task(s) outstanding that require termination or - * completion before this request can succeed. - */ -enum sci_task_status scic_controller_start_task( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *req, - u16 task_tag) -{ - enum sci_status status; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { - dev_warn(scic_to_dev(scic), - "%s: SCIC Controller starting task from invalid " - "state\n", - __func__); - return SCI_TASK_FAILURE_INVALID_STATE; - } - - status = scic_sds_remote_device_start_task(scic, rdev, req); - switch (status) { - case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; - - /* - * We will let framework know this task request started successfully, - * although core is still woring on starting the request (to post tc when - * RNC is resumed.) - */ - return SCI_SUCCESS; - case SCI_SUCCESS: - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; - - scic_sds_controller_post_request(scic, - scic_sds_request_get_post_context(req)); - break; - default: - break; - } - - return status; -} - -/** - * scic_controller_allocate_io_tag() - This method will allocate a tag from the - * pool of free IO tags. Direct allocation of IO tags by the SCI Core user - * is optional. The scic_controller_start_io() method will allocate an IO - * tag if this method is not utilized and the tag is not supplied to the IO - * construct routine. Direct allocation of IO tags may provide additional - * performance improvements in environments capable of supporting this usage - * model. Additionally, direct allocation of IO tags also provides - * additional flexibility to the SCI Core user. Specifically, the user may - * retain IO tags across the lives of multiple IO requests. - * @controller: the handle to the controller object for which to allocate the - * tag. - * - * IO tags are a protected resource. It is incumbent upon the SCI Core user to - * ensure that each of the methods that may allocate or free available IO tags - * are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). An unsigned integer representing an available IO tag. - * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no - * currently available tags to be allocated. All return other values indicate a - * legitimate tag. - */ -u16 scic_controller_allocate_io_tag( - struct scic_sds_controller *scic) -{ - u16 task_context; - u16 sequence_count; - - if (!sci_pool_empty(scic->tci_pool)) { - sci_pool_get(scic->tci_pool, task_context); - - sequence_count = scic->io_request_sequence[task_context]; - - return scic_sds_io_tag_construct(sequence_count, task_context); - } - - return SCI_CONTROLLER_INVALID_IO_TAG; -} - -/** - * scic_controller_free_io_tag() - This method will free an IO tag to the pool - * of free IO tags. This method provides the SCI Core user more flexibility - * with regards to IO tags. The user may desire to keep an IO tag after an - * IO request has completed, because they plan on re-using the tag for a - * subsequent IO request. This method is only legal if the tag was - * allocated via scic_controller_allocate_io_tag(). - * @controller: This parameter specifies the handle to the controller object - * for which to free/return the tag. - * @io_tag: This parameter represents the tag to be freed to the pool of - * available tags. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI - * Core user, using the scic_controller_allocate_io_tag() method, then it is - * the responsibility of the caller to invoke this method to free the tag. This - * method returns an indication of whether the tag was successfully put back - * (freed) to the pool of available tags. SCI_SUCCESS This return value - * indicates the tag was successfully placed into the pool of available IO - * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag - * is not a valid IO tag value. - */ -enum sci_status scic_controller_free_io_tag( - struct scic_sds_controller *scic, - u16 io_tag) -{ - u16 sequence; - u16 index; - - BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG); - - sequence = scic_sds_io_tag_get_sequence(io_tag); - index = scic_sds_io_tag_get_index(io_tag); - - if (!sci_pool_full(scic->tci_pool)) { - if (sequence == scic->io_request_sequence[index]) { - scic_sds_io_sequence_increment( - scic->io_request_sequence[index]); - - sci_pool_put(scic->tci_pool, index); - - return SCI_SUCCESS; - } - } - - return SCI_FAILURE_INVALID_IO_TAG; -} - -void scic_controller_enable_interrupts( - struct scic_sds_controller *scic) -{ - BUG_ON(scic->smu_registers == NULL); - writel(0, &scic->smu_registers->interrupt_mask); -} - -void scic_controller_disable_interrupts( - struct scic_sds_controller *scic) -{ - BUG_ON(scic->smu_registers == NULL); - writel(0xffffffff, &scic->smu_registers->interrupt_mask); -} - -static enum sci_status scic_controller_set_mode( - struct scic_sds_controller *scic, - enum sci_controller_mode operating_mode) -{ - enum sci_status status = SCI_SUCCESS; - - if ((scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_INITIALIZING) || - (scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_INITIALIZED)) { - switch (operating_mode) { - case SCI_MODE_SPEED: - scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; - scic->task_context_entries = SCU_IO_REQUEST_COUNT; - scic->uf_control.buffers.count = - SCU_UNSOLICITED_FRAME_COUNT; - scic->completion_event_entries = SCU_EVENT_COUNT; - scic->completion_queue_entries = - SCU_COMPLETION_QUEUE_COUNT; - break; - - case SCI_MODE_SIZE: - scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES; - scic->task_context_entries = SCI_MIN_IO_REQUESTS; - scic->uf_control.buffers.count = - SCU_MIN_UNSOLICITED_FRAMES; - scic->completion_event_entries = SCU_MIN_EVENTS; - scic->completion_queue_entries = - SCU_MIN_COMPLETION_QUEUE_ENTRIES; - break; - - default: - status = SCI_FAILURE_INVALID_PARAMETER_VALUE; - break; - } - } else - status = SCI_FAILURE_INVALID_STATE; - - return status; -} - -/** - * scic_sds_controller_reset_hardware() - - * - * This method will reset the controller hardware. - */ -static void scic_sds_controller_reset_hardware( - struct scic_sds_controller *scic) -{ - /* Disable interrupts so we dont take any spurious interrupts */ - scic_controller_disable_interrupts(scic); - - /* Reset the SCU */ - writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control); - - /* Delay for 1ms to before clearing the CQP and UFQPR. */ - udelay(1000); - - /* The write to the CQGR clears the CQP */ - writel(0x00000000, &scic->smu_registers->completion_queue_get); - - /* The write to the UFQGP clears the UFQPR */ - writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer); -} - -enum sci_status scic_user_parameters_set( - struct scic_sds_controller *scic, - union scic_user_parameters *scic_parms) -{ - u32 state = scic->state_machine.current_state_id; - - if (state == SCI_BASE_CONTROLLER_STATE_RESET || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { - u16 index; - - /* - * Validate the user parameters. If they are not legal, then - * return a failure. - */ - for (index = 0; index < SCI_MAX_PHYS; index++) { - struct sci_phy_user_params *user_phy; - - user_phy = &scic_parms->sds1.phys[index]; - - if (!((user_phy->max_speed_generation <= - SCIC_SDS_PARM_MAX_SPEED) && - (user_phy->max_speed_generation > - SCIC_SDS_PARM_NO_SPEED))) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - - if (user_phy->in_connection_align_insertion_frequency < - 3) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - - if ((user_phy->in_connection_align_insertion_frequency < - 3) || - (user_phy->align_insertion_frequency == 0) || - (user_phy-> - notify_enable_spin_up_insertion_frequency == - 0)) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } - - if ((scic_parms->sds1.stp_inactivity_timeout == 0) || - (scic_parms->sds1.ssp_inactivity_timeout == 0) || - (scic_parms->sds1.stp_max_occupancy_timeout == 0) || - (scic_parms->sds1.ssp_max_occupancy_timeout == 0) || - (scic_parms->sds1.no_outbound_task_timeout == 0)) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - - memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms)); - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_STATE; -} - -int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) -{ - int i; - - for (i = 0; i < SCI_MAX_PORTS; i++) - if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) - return -EINVAL; - - for (i = 0; i < SCI_MAX_PHYS; i++) - if (oem->phys[i].sas_address.high == 0 && - oem->phys[i].sas_address.low == 0) - return -EINVAL; - - if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { - for (i = 0; i < SCI_MAX_PHYS; i++) - if (oem->ports[i].phy_mask != 0) - return -EINVAL; - } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - u8 phy_mask = 0; - - for (i = 0; i < SCI_MAX_PHYS; i++) - phy_mask |= oem->ports[i].phy_mask; - - if (phy_mask == 0) - return -EINVAL; - } else - return -EINVAL; - - if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) - return -EINVAL; - - return 0; -} - -enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, - union scic_oem_parameters *scic_parms) -{ - u32 state = scic->state_machine.current_state_id; - - if (state == SCI_BASE_CONTROLLER_STATE_RESET || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { - - if (scic_oem_parameters_validate(&scic_parms->sds1)) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - scic->oem_parameters.sds1 = scic_parms->sds1; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_STATE; -} - -void scic_oem_parameters_get( - struct scic_sds_controller *scic, - union scic_oem_parameters *scic_parms) -{ - memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); -} - -#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 -#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280 -#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000 -#define INTERRUPT_COALESCE_NUMBER_MAX 256 -#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7 -#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 - -/** - * scic_controller_set_interrupt_coalescence() - This method allows the user to - * configure the interrupt coalescence. - * @controller: This parameter represents the handle to the controller object - * for which its interrupt coalesce register is overridden. - * @coalesce_number: Used to control the number of entries in the Completion - * Queue before an interrupt is generated. If the number of entries exceed - * this number, an interrupt will be generated. The valid range of the input - * is [0, 256]. A setting of 0 results in coalescing being disabled. - * @coalesce_timeout: Timeout value in microseconds. The valid range of the - * input is [0, 2700000] . A setting of 0 is allowed and results in no - * interrupt coalescing timeout. - * - * Indicate if the user successfully set the interrupt coalesce parameters. - * SCI_SUCCESS The user successfully updated the interrutp coalescence. - * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. - */ -static enum sci_status scic_controller_set_interrupt_coalescence( - struct scic_sds_controller *scic_controller, - u32 coalesce_number, - u32 coalesce_timeout) -{ - u8 timeout_encode = 0; - u32 min = 0; - u32 max = 0; - - /* Check if the input parameters fall in the range. */ - if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX) - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - - /* - * Defined encoding for interrupt coalescing timeout: - * Value Min Max Units - * ----- --- --- ----- - * 0 - - Disabled - * 1 13.3 20.0 ns - * 2 26.7 40.0 - * 3 53.3 80.0 - * 4 106.7 160.0 - * 5 213.3 320.0 - * 6 426.7 640.0 - * 7 853.3 1280.0 - * 8 1.7 2.6 us - * 9 3.4 5.1 - * 10 6.8 10.2 - * 11 13.7 20.5 - * 12 27.3 41.0 - * 13 54.6 81.9 - * 14 109.2 163.8 - * 15 218.5 327.7 - * 16 436.9 655.4 - * 17 873.8 1310.7 - * 18 1.7 2.6 ms - * 19 3.5 5.2 - * 20 7.0 10.5 - * 21 14.0 21.0 - * 22 28.0 41.9 - * 23 55.9 83.9 - * 24 111.8 167.8 - * 25 223.7 335.5 - * 26 447.4 671.1 - * 27 894.8 1342.2 - * 28 1.8 2.7 s - * Others Undefined */ - - /* - * Use the table above to decide the encode of interrupt coalescing timeout - * value for register writing. */ - if (coalesce_timeout == 0) - timeout_encode = 0; - else{ - /* make the timeout value in unit of (10 ns). */ - coalesce_timeout = coalesce_timeout * 100; - min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10; - max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10; - - /* get the encode of timeout for register writing. */ - for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN; - timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX; - timeout_encode++) { - if (min <= coalesce_timeout && max > coalesce_timeout) - break; - else if (coalesce_timeout >= max && coalesce_timeout < min * 2 - && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) { - if ((coalesce_timeout - max) < (2 * min - coalesce_timeout)) - break; - else{ - timeout_encode++; - break; - } - } else { - max = max * 2; - min = min * 2; - } - } - - if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1) - /* the value is out of range. */ - return SCI_FAILURE_INVALID_PARAMETER_VALUE; - } - - writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | - SMU_ICC_GEN_VAL(TIMER, timeout_encode), - &scic_controller->smu_registers->interrupt_coalesce_control); - - - scic_controller->interrupt_coalesce_number = (u16)coalesce_number; - scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100; - - return SCI_SUCCESS; -} - - - -enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) -{ - struct sci_base_state_machine *sm = &scic->state_machine; - enum sci_status result = SCI_SUCCESS; - struct isci_host *ihost = scic_to_ihost(scic); - u32 index, state; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_RESET) { - dev_warn(scic_to_dev(scic), - "SCIC Controller initialize operation requested " - "in invalid state\n"); - return SCI_FAILURE_INVALID_STATE; - } - - sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); - - scic->timeout_timer = isci_timer_create(ihost, - scic, - scic_sds_controller_timeout_handler); - - scic_sds_controller_initialize_phy_startup(scic); - - scic_sds_controller_initialize_power_control(scic); - - /* - * There is nothing to do here for B0 since we do not have to - * program the AFE registers. - * / @todo The AFE settings are supposed to be correct for the B0 but - * / presently they seem to be wrong. */ - scic_sds_controller_afe_initialization(scic); - - if (result == SCI_SUCCESS) { - u32 status; - u32 terminate_loop; - - /* Take the hardware out of reset */ - writel(0, &scic->smu_registers->soft_reset_control); - - /* - * / @todo Provide meaningfull error code for hardware failure - * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ - result = SCI_FAILURE; - terminate_loop = 100; - - while (terminate_loop-- && (result != SCI_SUCCESS)) { - /* Loop until the hardware reports success */ - udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); - status = readl(&scic->smu_registers->control_status); - - if ((status & SCU_RAM_INIT_COMPLETED) == - SCU_RAM_INIT_COMPLETED) - result = SCI_SUCCESS; - } - } - - if (result == SCI_SUCCESS) { - u32 max_supported_ports; - u32 max_supported_devices; - u32 max_supported_io_requests; - u32 device_context_capacity; - - /* - * Determine what are the actaul device capacities that the - * hardware will support */ - device_context_capacity = - readl(&scic->smu_registers->device_context_capacity); - - - max_supported_ports = smu_dcc_get_max_ports(device_context_capacity); - max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity); - max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity); - - /* - * Make all PEs that are unassigned match up with the - * logical ports - */ - for (index = 0; index < max_supported_ports; index++) { - struct scu_port_task_scheduler_group_registers __iomem - *ptsg = &scic->scu_registers->peg0.ptsg; - - writel(index, &ptsg->protocol_engine[index]); - } - - /* Record the smaller of the two capacity values */ - scic->logical_port_entries = - min(max_supported_ports, scic->logical_port_entries); - - scic->task_context_entries = - min(max_supported_io_requests, - scic->task_context_entries); - - scic->remote_node_entries = - min(max_supported_devices, scic->remote_node_entries); - - /* - * Now that we have the correct hardware reported minimum values - * build the MDL for the controller. Default to a performance - * configuration. - */ - scic_controller_set_mode(scic, SCI_MODE_SPEED); - } - - /* Initialize hardware PCI Relaxed ordering in DMA engines */ - if (result == SCI_SUCCESS) { - u32 dma_configuration; - - /* Configure the payload DMA */ - dma_configuration = - readl(&scic->scu_registers->sdma.pdma_configuration); - dma_configuration |= - SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - writel(dma_configuration, - &scic->scu_registers->sdma.pdma_configuration); - - /* Configure the control DMA */ - dma_configuration = - readl(&scic->scu_registers->sdma.cdma_configuration); - dma_configuration |= - SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - writel(dma_configuration, - &scic->scu_registers->sdma.cdma_configuration); - } - - /* - * Initialize the PHYs before the PORTs because the PHY registers - * are accessed during the port initialization. - */ - if (result == SCI_SUCCESS) { - /* Initialize the phys */ - for (index = 0; - (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS); - index++) { - result = scic_sds_phy_initialize( - &ihost->phys[index].sci, - &scic->scu_registers->peg0.pe[index].tl, - &scic->scu_registers->peg0.pe[index].ll); - } - } - - if (result == SCI_SUCCESS) { - /* Initialize the logical ports */ - for (index = 0; - (index < scic->logical_port_entries) && - (result == SCI_SUCCESS); - index++) { - result = scic_sds_port_initialize( - &ihost->ports[index].sci, - &scic->scu_registers->peg0.ptsg.port[index], - &scic->scu_registers->peg0.ptsg.protocol_engine, - &scic->scu_registers->peg0.viit[index]); - } - } - - if (result == SCI_SUCCESS) - result = scic_sds_port_configuration_agent_initialize( - scic, - &scic->port_agent); - - /* Advance the controller state machine */ - if (result == SCI_SUCCESS) - state = SCI_BASE_CONTROLLER_STATE_INITIALIZED; - else - state = SCI_BASE_CONTROLLER_STATE_FAILED; - sci_base_state_machine_change_state(sm, state); - - return result; -} - -enum sci_status scic_controller_start(struct scic_sds_controller *scic, - u32 timeout) -{ - struct isci_host *ihost = scic_to_ihost(scic); - enum sci_status result; - u16 index; - - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_INITIALIZED) { - dev_warn(scic_to_dev(scic), - "SCIC Controller start operation requested in " - "invalid state\n"); - return SCI_FAILURE_INVALID_STATE; - } - - /* Build the TCi free pool */ - sci_pool_initialize(scic->tci_pool); - for (index = 0; index < scic->task_context_entries; index++) - sci_pool_put(scic->tci_pool, index); - - /* Build the RNi free pool */ - scic_sds_remote_node_table_initialize( - &scic->available_remote_nodes, - scic->remote_node_entries); - - /* - * Before anything else lets make sure we will not be - * interrupted by the hardware. - */ - scic_controller_disable_interrupts(scic); - - /* Enable the port task scheduler */ - scic_sds_controller_enable_port_task_scheduler(scic); - - /* Assign all the task entries to scic physical function */ - scic_sds_controller_assign_task_entries(scic); - - /* Now initialize the completion queue */ - scic_sds_controller_initialize_completion_queue(scic); - - /* Initialize the unsolicited frame queue for use */ - scic_sds_controller_initialize_unsolicited_frame_queue(scic); - - /* Start all of the ports on this controller */ - for (index = 0; index < scic->logical_port_entries; index++) { - struct scic_sds_port *sci_port = &ihost->ports[index].sci; - - result = sci_port->state_handlers->start_handler(sci_port); - if (result) - return result; - } - - scic_sds_controller_start_next_phy(scic); - - isci_timer_start(scic->timeout_timer, timeout); - - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STARTING); - - return SCI_SUCCESS; -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on entry - * to the SCI_BASE_CONTROLLER_STATE_INITIAL. - Set the state handlers to the - * controllers initial state. none This function should initialize the - * controller object. - */ -static void scic_sds_controller_initial_state_enter(void *object) -{ - struct scic_sds_controller *scic = object; - - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESET); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on exit - * from the SCI_BASE_CONTROLLER_STATE_STARTING. - This function stops the - * controller starting timeout timer. none - */ -static inline void scic_sds_controller_starting_state_exit(void *object) -{ - struct scic_sds_controller *scic = object; - - isci_timer_stop(scic->timeout_timer); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on entry - * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the - * controllers ready state. none - */ -static void scic_sds_controller_ready_state_enter(void *object) -{ - struct scic_sds_controller *scic = object; - - /* set the default interrupt coalescence number and timeout value. */ - scic_controller_set_interrupt_coalescence( - scic, 0x10, 250); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on exit - * from the SCI_BASE_CONTROLLER_STATE_READY. - This function does nothing. none - */ -static void scic_sds_controller_ready_state_exit(void *object) -{ - struct scic_sds_controller *scic = object; - - /* disable interrupt coalescence. */ - scic_controller_set_interrupt_coalescence(scic, 0, 0); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_controller - * object. - * - * This method implements the actions taken by the struct scic_sds_controller on entry - * to the SCI_BASE_CONTROLLER_STATE_READY. - Set the state handlers to the - * controllers ready state. - Stop the phys on this controller - Stop the ports - * on this controller - Stop all of the remote devices on this controller none - */ -static void scic_sds_controller_stopping_state_enter(void *object) -{ - struct scic_sds_controller *scic = object; - - /* Stop all of the components for this controller */ - scic_sds_controller_stop_phys(scic); - scic_sds_controller_stop_ports(scic); - scic_sds_controller_stop_devices(scic); -} - -/** - * - * @object: This is the object which is cast to a struct - * scic_sds_controller object. - * - * This function implements the actions taken by the struct scic_sds_controller - * on exit from the SCI_BASE_CONTROLLER_STATE_STOPPING. - - * This function stops the controller stopping timeout timer. - */ -static inline void scic_sds_controller_stopping_state_exit(void *object) -{ - struct scic_sds_controller *scic = object; - - isci_timer_stop(scic->timeout_timer); -} - -static void scic_sds_controller_resetting_state_enter(void *object) -{ - struct scic_sds_controller *scic = object; - - scic_sds_controller_reset_hardware(scic); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESET); -} - -static const struct sci_base_state scic_sds_controller_state_table[] = { - [SCI_BASE_CONTROLLER_STATE_INITIAL] = { - .enter_state = scic_sds_controller_initial_state_enter, - }, - [SCI_BASE_CONTROLLER_STATE_RESET] = {}, - [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {}, - [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {}, - [SCI_BASE_CONTROLLER_STATE_STARTING] = { - .exit_state = scic_sds_controller_starting_state_exit, - }, - [SCI_BASE_CONTROLLER_STATE_READY] = { - .enter_state = scic_sds_controller_ready_state_enter, - .exit_state = scic_sds_controller_ready_state_exit, - }, - [SCI_BASE_CONTROLLER_STATE_RESETTING] = { - .enter_state = scic_sds_controller_resetting_state_enter, - }, - [SCI_BASE_CONTROLLER_STATE_STOPPING] = { - .enter_state = scic_sds_controller_stopping_state_enter, - .exit_state = scic_sds_controller_stopping_state_exit, - }, - [SCI_BASE_CONTROLLER_STATE_STOPPED] = {}, - [SCI_BASE_CONTROLLER_STATE_FAILED] = {} -}; - -/** - * scic_controller_construct() - This method will attempt to construct a - * controller object utilizing the supplied parameter information. - * @c: This parameter specifies the controller to be constructed. - * @scu_base: mapped base address of the scu registers - * @smu_base: mapped base address of the smu registers - * - * Indicate if the controller was successfully constructed or if it failed in - * some way. SCI_SUCCESS This value is returned if the controller was - * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned - * if the interrupt coalescence timer may cause SAS compliance issues for SMP - * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE - * This value is returned if the controller does not support the supplied type. - * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the - * controller does not support the supplied initialization data version. - */ -enum sci_status scic_controller_construct(struct scic_sds_controller *scic, - void __iomem *scu_base, - void __iomem *smu_base) -{ - struct isci_host *ihost = scic_to_ihost(scic); - u8 i; - - sci_base_state_machine_construct(&scic->state_machine, - scic, scic_sds_controller_state_table, - SCI_BASE_CONTROLLER_STATE_INITIAL); - - sci_base_state_machine_start(&scic->state_machine); - - scic->scu_registers = scu_base; - scic->smu_registers = smu_base; - - scic_sds_port_configuration_agent_construct(&scic->port_agent); - - /* Construct the ports for this controller */ - for (i = 0; i < SCI_MAX_PORTS; i++) - scic_sds_port_construct(&ihost->ports[i].sci, i, scic); - scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic); - - /* Construct the phys for this controller */ - for (i = 0; i < SCI_MAX_PHYS; i++) { - /* Add all the PHYs to the dummy port */ - scic_sds_phy_construct(&ihost->phys[i].sci, - &ihost->ports[SCI_MAX_PORTS].sci, i); - } - - scic->invalid_phy_mask = 0; - - /* Set the default maximum values */ - scic->completion_event_entries = SCU_EVENT_COUNT; - scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; - scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; - scic->logical_port_entries = SCI_MAX_PORTS; - scic->task_context_entries = SCU_IO_REQUEST_COUNT; - scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT; - scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT; - - /* Initialize the User and OEM parameters to default values. */ - scic_sds_controller_set_default_config_parameters(scic); - - return scic_controller_reset(scic); -} diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h deleted file mode 100644 index 5c00f96..0000000 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ /dev/null @@ -1,576 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_CONTROLLER_H_ -#define _SCIC_SDS_CONTROLLER_H_ - -#include -#include - -/** - * This file contains the structures, constants and prototypes used for the - * core controller object. - * - * - */ - -#include "sci_pool.h" -#include "sci_base_state.h" -#include "sci_base_state_machine.h" -#include "scic_config_parameters.h" -#include "scic_sds_port.h" -#include "scic_sds_phy.h" -#include "remote_node_table.h" -#include "remote_device.h" -#include "scu_registers.h" -#include "scu_task_context.h" -#include "scu_unsolicited_frame.h" -#include "scic_sds_unsolicited_frame_control.h" -#include "scic_sds_port_configuration_agent.h" - -struct sci_base_remote_device; -struct scic_sds_remote_device; -struct scic_sds_request; -struct scic_sds_controller; - -/** - * struct scic_power_control - - * - * This structure defines the fields for managing power control for direct - * attached disk devices. - */ -struct scic_power_control { - /** - * This field is set when the power control timer is running and cleared when - * it is not. - */ - bool timer_started; - - /** - * This field is the handle to the driver timer object. This timer is used to - * control when the directed attached disks can consume power. - */ - void *timer; - - /** - * This field is used to keep track of how many phys are put into the - * requesters field. - */ - u8 phys_waiting; - - /** - * This field is used to keep track of how many phys have been granted to consume power - */ - u8 phys_granted_power; - - /** - * This field is an array of phys that we are waiting on. The phys are direct - * mapped into requesters via struct scic_sds_phy.phy_index - */ - struct scic_sds_phy *requesters[SCI_MAX_PHYS]; - -}; - -/** - * struct scic_sds_controller - - * - * This structure represents the SCU controller object. - */ -struct scic_sds_controller { - /** - * This field contains the information for the base controller state - * machine. - */ - struct sci_base_state_machine state_machine; - - /** - * This field is the driver timer object handler used to time the controller - * object start and stop requests. - */ - void *timeout_timer; - - /** - * This field contains the user parameters to be utilized for this - * core controller object. - */ - union scic_user_parameters user_parameters; - - /** - * This field contains the OEM parameters to be utilized for this - * core controller object. - */ - union scic_oem_parameters oem_parameters; - - /** - * This field contains the port configuration agent for this controller. - */ - struct scic_sds_port_configuration_agent port_agent; - - /** - * This field is the array of device objects that are currently constructed - * for this controller object. This table is used as a fast lookup of device - * objects that need to handle device completion notifications from the - * hardware. The table is RNi based. - */ - struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; - - /** - * This field is the array of IO request objects that are currently active for - * this controller object. This table is used as a fast lookup of the io - * request object that need to handle completion queue notifications. The - * table is TCi based. - */ - struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS]; - - /** - * This field is the free RNi data structure - */ - struct scic_remote_node_table available_remote_nodes; - - /** - * This field is the TCi pool used to manage the task context index. - */ - SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS); - - /** - * This filed is the struct scic_power_control data used to controll when direct - * attached devices can consume power. - */ - struct scic_power_control power_control; - - /** - * This field is the array of sequence values for the IO Tag fields. Even - * though only 4 bits of the field is used for the sequence the sequence is 16 - * bits in size so the sequence can be bitwise or'd with the TCi to build the - * IO Tag value. - */ - u16 io_request_sequence[SCI_MAX_IO_REQUESTS]; - - /** - * This field in the array of sequence values for the RNi. These are used - * to control io request build to io request start operations. The sequence - * value is recorded into an io request when it is built and is checked on - * the io request start operation to make sure that there was not a device - * hot plug between the build and start operation. - */ - u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES]; - - /** - * This field is a pointer to the memory allocated by the driver for the task - * context table. This data is shared between the hardware and software. - */ - struct scu_task_context *task_context_table; - - /** - * This field is a pointer to the memory allocated by the driver for the - * remote node context table. This table is shared between the hardware and - * software. - */ - union scu_remote_node_context *remote_node_context_table; - - /** - * This field is a pointer to the completion queue. This memory is - * written to by the hardware and read by the software. - */ - u32 *completion_queue; - - /** - * This field is the software copy of the completion queue get pointer. The - * controller object writes this value to the hardware after processing the - * completion entries. - */ - u32 completion_queue_get; - - /** - * This field is the minimum of the number of hardware supported port entries - * and the software requested port entries. - */ - u32 logical_port_entries; - - /** - * This field is the minimum number of hardware supported completion queue - * entries and the software requested completion queue entries. - */ - u32 completion_queue_entries; - - /** - * This field is the minimum number of hardware supported event entries and - * the software requested event entries. - */ - u32 completion_event_entries; - - /** - * This field is the minimum number of devices supported by the hardware and - * the number of devices requested by the software. - */ - u32 remote_node_entries; - - /** - * This field is the minimum number of IO requests supported by the hardware - * and the number of IO requests requested by the software. - */ - u32 task_context_entries; - - /** - * This object contains all of the unsolicited frame specific - * data utilized by the core controller. - */ - struct scic_sds_unsolicited_frame_control uf_control; - - /* Phy Startup Data */ - /** - * This field is the driver timer handle for controller phy request startup. - * On controller start the controller will start each PHY individually in - * order of phy index. - */ - void *phy_startup_timer; - - /** - * This field is set when the phy_startup_timer is running and is cleared when - * the phy_startup_timer is stopped. - */ - bool phy_startup_timer_pending; - - /** - * This field is the index of the next phy start. It is initialized to 0 and - * increments for each phy index that is started. - */ - u32 next_phy_to_start; - - /** - * This field controlls the invalid link up notifications to the SCI_USER. If - * an invalid_link_up notification is reported a bit for the PHY index is set - * so further notifications are not made. Once the PHY object reports link up - * and is made part of a port then this bit for the PHY index is cleared. - */ - u8 invalid_phy_mask; - - /* - * This field saves the current interrupt coalescing number of the controller. - */ - u16 interrupt_coalesce_number; - - /* - * This field saves the current interrupt coalescing timeout value in microseconds. - */ - u32 interrupt_coalesce_timeout; - - /** - * This field is a pointer to the memory mapped register space for the - * struct smu_registers. - */ - struct smu_registers __iomem *smu_registers; - - /** - * This field is a pointer to the memory mapped register space for the - * struct scu_registers. - */ - struct scu_registers __iomem *scu_registers; - -}; - -/** - * enum scic_sds_controller_states - This enumeration depicts all the states - * for the common controller state machine. - */ -enum scic_sds_controller_states { - /** - * Simply the initial state for the base controller state machine. - */ - SCI_BASE_CONTROLLER_STATE_INITIAL = 0, - - /** - * This state indicates that the controller is reset. The memory for - * the controller is in it's initial state, but the controller requires - * initialization. - * This state is entered from the INITIAL state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_CONTROLLER_STATE_RESET, - - /** - * This state is typically an action state that indicates the controller - * is in the process of initialization. In this state no new IO operations - * are permitted. - * This state is entered from the RESET state. - */ - SCI_BASE_CONTROLLER_STATE_INITIALIZING, - - /** - * This state indicates that the controller has been successfully - * initialized. In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - */ - SCI_BASE_CONTROLLER_STATE_INITIALIZED, - - /** - * This state indicates the the controller is in the process of becoming - * ready (i.e. starting). In this state no new IO operations are permitted. - * This state is entered from the INITIALIZED state. - */ - SCI_BASE_CONTROLLER_STATE_STARTING, - - /** - * This state indicates the controller is now ready. Thus, the user - * is able to perform IO operations on the controller. - * This state is entered from the STARTING state. - */ - SCI_BASE_CONTROLLER_STATE_READY, - - /** - * This state is typically an action state that indicates the controller - * is in the process of resetting. Thus, the user is unable to perform - * IO operations on the controller. A reset is considered destructive in - * most cases. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - * This state is entered from the STOPPED state. - */ - SCI_BASE_CONTROLLER_STATE_RESETTING, - - /** - * This state indicates that the controller is in the process of stopping. - * In this state no new IO operations are permitted, but existing IO - * operations are allowed to complete. - * This state is entered from the READY state. - */ - SCI_BASE_CONTROLLER_STATE_STOPPING, - - /** - * This state indicates that the controller has successfully been stopped. - * In this state no new IO operations are permitted. - * This state is entered from the STOPPING state. - */ - SCI_BASE_CONTROLLER_STATE_STOPPED, - - /** - * This state indicates that the controller could not successfully be - * initialized. In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the STARTING state. - * This state is entered from the STOPPING state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_CONTROLLER_STATE_FAILED, - - SCI_BASE_CONTROLLER_MAX_STATES - -}; - -/** - * INCREMENT_QUEUE_GET() - - * - * This macro will increment the specified index to and if the index wraps to 0 - * it will toggel the cycle bit. - */ -#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \ - { \ - if ((index) + 1 == entry_count) { \ - (index) = 0; \ - (cycle) = (cycle) ^ (bit_toggle); \ - } else { \ - index = index + 1; \ - } \ - } - -/** - * scic_sds_controller_get_port_configuration_agent() - - * - * This is a helper macro to get the port configuration agent from the - * controller object. - */ -#define scic_sds_controller_get_port_configuration_agent(controller) \ - (&(controller)->port_agent) - -/** - * scic_sds_controller_get_protocol_engine_group() - - * - * This macro returns the protocol engine group for this controller object. - * Presently we only support protocol engine group 0 so just return that - */ -#define scic_sds_controller_get_protocol_engine_group(controller) 0 - -/** - * scic_sds_io_tag_construct() - - * - * This macro constructs an IO tag from the sequence and index values. - */ -#define scic_sds_io_tag_construct(sequence, task_index) \ - ((sequence) << 12 | (task_index)) - -/** - * scic_sds_io_tag_get_sequence() - - * - * This macro returns the IO sequence from the IO tag value. - */ -#define scic_sds_io_tag_get_sequence(io_tag) \ - (((io_tag) & 0xF000) >> 12) - -/** - * scic_sds_io_tag_get_index() - - * - * This macro returns the TCi from the io tag value - */ -#define scic_sds_io_tag_get_index(io_tag) \ - ((io_tag) & 0x0FFF) - -/** - * scic_sds_io_sequence_increment() - - * - * This is a helper macro to increment the io sequence count. We may find in - * the future that it will be faster to store the sequence count in such a way - * as we dont perform the shift operation to build io tag values so therefore - * need a way to incrment them correctly - */ -#define scic_sds_io_sequence_increment(value) \ - ((value) = (((value) + 1) & 0x000F)) - -/* expander attached sata devices require 3 rnc slots */ -static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev) -{ - struct domain_device *dev = sci_dev_to_domain(sci_dev); - - if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && - !sci_dev->is_direct_attached) - return SCU_STP_REMOTE_NODE_COUNT; - return SCU_SSP_REMOTE_NODE_COUNT; -} - -/** - * scic_sds_controller_set_invalid_phy() - - * - * This macro will set the bit in the invalid phy mask for this controller - * object. This is used to control messages reported for invalid link up - * notifications. - */ -#define scic_sds_controller_set_invalid_phy(controller, phy) \ - ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index)) - -/** - * scic_sds_controller_clear_invalid_phy() - - * - * This macro will clear the bit in the invalid phy mask for this controller - * object. This is used to control messages reported for invalid link up - * notifications. - */ -#define scic_sds_controller_clear_invalid_phy(controller, phy) \ - ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) - -void scic_sds_controller_post_request( - struct scic_sds_controller *this_controller, - u32 request); - -void scic_sds_controller_release_frame( - struct scic_sds_controller *this_controller, - u32 frame_index); - -void scic_sds_controller_copy_sata_response( - void *response_buffer, - void *frame_header, - void *frame_buffer); - -enum sci_status scic_sds_controller_allocate_remote_node_context( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *sci_dev, - u16 *node_id); - -void scic_sds_controller_free_remote_node_context( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *sci_dev, - u16 node_id); - -union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct scic_sds_controller *this_controller, - u16 node_id); - -struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, - u16 io_tag); - -struct scu_task_context *scic_sds_controller_get_task_context_buffer( - struct scic_sds_controller *this_controller, - u16 io_tag); - -void scic_sds_controller_power_control_queue_insert( - struct scic_sds_controller *this_controller, - struct scic_sds_phy *sci_phy); - -void scic_sds_controller_power_control_queue_remove( - struct scic_sds_controller *this_controller, - struct scic_sds_phy *sci_phy); - -void scic_sds_controller_link_up( - struct scic_sds_controller *this_controller, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -void scic_sds_controller_link_down( - struct scic_sds_controller *this_controller, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -void scic_sds_controller_remote_device_stopped( - struct scic_sds_controller *this_controller, - struct scic_sds_remote_device *sci_dev); - -void scic_sds_controller_copy_task_context( - struct scic_sds_controller *this_controller, - struct scic_sds_request *this_request); - -void scic_sds_controller_register_setup( - struct scic_sds_controller *this_controller); - -enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req); - -#endif /* _SCIC_SDS_CONTROLLER_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index c6df0e2..c82ccb9 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -55,14 +55,13 @@ #include #include "sas.h" +#include "host.h" #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_phy.h" -#include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" #include "timers.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 9302e39..652d823 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -53,16 +53,14 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "scic_controller.h" +#include "host.h" #include "scic_phy.h" #include "scic_port.h" -#include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" #include "scic_sds_request.h" -#include "sci_environment.h" #include "scu_registers.h" #include "timers.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 3696deb..bd612d5 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -57,6 +57,7 @@ #define _SCIC_SDS_PORT_H_ #include +#include "isci.h" #include "sas.h" #include "scu_registers.h" #include "sci_base_state_machine.h" diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c index 3fad8c1..a5871fd 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c @@ -53,9 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "sci_environment.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" +#include "host.h" #include "scic_sds_port_configuration_agent.h" #include "timers.h" diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index de35885..1405aa7 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -54,9 +54,7 @@ */ #include -#include "scic_controller.h" #include "scic_io_request.h" -#include "scic_sds_controller.h" #include "scu_registers.h" #include "scic_sds_port.h" #include "remote_device.h" @@ -64,7 +62,6 @@ #include "scic_sds_smp_request.h" #include "scic_sds_stp_request.h" #include "scic_sds_unsolicited_frame_control.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 2b91120..7f33894 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -55,15 +55,13 @@ #include #include "sci_base_state_machine.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" #include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_smp_request.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_task_context.h" +#include "host.h" static void scu_smp_request_construct_task_context( struct scic_sds_request *sci_req, diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index 18bf387..137f6dd 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -53,11 +53,9 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "host.h" #include "sci_base_state_machine.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" #include "scic_sds_request.h" -#include "sci_environment.h" #include "scu_completion_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index c1c316c..2f50951 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -58,13 +58,11 @@ #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_io_request.h" -#include "scic_sds_controller.h" #include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_stp_pio_request.h" #include "scic_sds_stp_request.h" #include "scic_sds_unsolicited_frame_control.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c index 9e393e5..d0e0373 100644 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c +++ b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c @@ -53,19 +53,10 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the implementation of the - * struct scic_sds_unsolicited_frame_control object and it's public, protected, and - * private methods. - * - * - */ - +#include "host.h" #include "scic_sds_unsolicited_frame_control.h" #include "scu_registers.h" -#include "scic_sds_controller.h" #include "sci_util.h" -#include "sci_environment.h" /** * This method will program the unsolicited frames (UFs) into the UF address diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 5847149..43a5d7a 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -52,18 +52,198 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - +#include +#include +#include "host.h" #include "isci.h" -#include "scic_io_request.h" -#include "scic_port.h" #include "port.h" -#include "request.h" #include "host.h" #include "probe_roms.h" -#include "scic_controller.h" -#include "scic_sds_controller.h" +#include "remote_device.h" +#include "request.h" +#include "scic_io_request.h" +#include "scic_sds_port_configuration_agent.h" +#include "sci_util.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "scu_registers.h" +#include "scu_remote_node_context.h" +#include "scu_task_context.h" +#include "scu_unsolicited_frame.h" #include "timers.h" +#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 + +/** + * smu_dcc_get_max_ports() - + * + * This macro returns the maximum number of logical ports supported by the + * hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_ports(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \ + ) + +/** + * smu_dcc_get_max_task_context() - + * + * This macro returns the maximum number of task contexts supported by the + * hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_task_context(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \ + ) + +/** + * smu_dcc_get_max_remote_node_context() - + * + * This macro returns the maximum number of remote node contexts supported by + * the hardware. The caller passes in the value read from the device context + * capacity register and this macro will mash and shift the value appropriately. + */ +#define smu_dcc_get_max_remote_node_context(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \ + ) + + +#define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT 3 +#define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT 3 + +/** + * + * + * The number of milliseconds to wait for a phy to start. + */ +#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 + +/** + * + * + * The number of milliseconds to wait while a given phy is consuming power + * before allowing another set of phys to consume power. Ultimately, this will + * be specified by OEM parameter. + */ +#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500 + +/** + * NORMALIZE_PUT_POINTER() - + * + * This macro will normalize the completion queue put pointer so its value can + * be used as an array inde + */ +#define NORMALIZE_PUT_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK) + + +/** + * NORMALIZE_EVENT_POINTER() - + * + * This macro will normalize the completion queue event entry so its value can + * be used as an index. + */ +#define NORMALIZE_EVENT_POINTER(x) \ + (\ + ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \ + >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \ + ) + +/** + * INCREMENT_COMPLETION_QUEUE_GET() - + * + * This macro will increment the controllers completion queue index value and + * possibly toggle the cycle bit if the completion queue index wraps back to 0. + */ +#define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \ + INCREMENT_QUEUE_GET(\ + (index), \ + (cycle), \ + (controller)->completion_queue_entries, \ + SMU_CQGR_CYCLE_BIT \ + ) + +/** + * INCREMENT_EVENT_QUEUE_GET() - + * + * This macro will increment the controllers event queue index value and + * possibly toggle the event cycle bit if the event queue index wraps back to 0. + */ +#define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \ + INCREMENT_QUEUE_GET(\ + (index), \ + (cycle), \ + (controller)->completion_event_entries, \ + SMU_CQGR_EVENT_CYCLE_BIT \ + ) + + +/** + * NORMALIZE_GET_POINTER() - + * + * This macro will normalize the completion queue get pointer so its value can + * be used as an index into an array + */ +#define NORMALIZE_GET_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK) + +/** + * NORMALIZE_GET_POINTER_CYCLE_BIT() - + * + * This macro will normalize the completion queue cycle pointer so it matches + * the completion queue cycle bit + */ +#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \ + ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT)) + +/** + * COMPLETION_QUEUE_CYCLE_BIT() - + * + * This macro will return the cycle bit of the completion queue entry + */ +#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000) + +static bool scic_sds_controller_completion_queue_has_entries( + struct scic_sds_controller *scic) +{ + u32 get_value = scic->completion_queue_get; + u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; + + if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) == + COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])) + return true; + + return false; +} + +static bool scic_sds_controller_isr(struct scic_sds_controller *scic) +{ + if (scic_sds_controller_completion_queue_has_entries(scic)) { + return true; + } else { + /* + * we have a spurious interrupt it could be that we have already + * emptied the completion queue from a previous interrupt */ + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the interrupts so if there is another interrupt pending + * the clearing of the interrupt source we get the next interrupt message. */ + writel(0xFF000000, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); + } + + return false; +} + irqreturn_t isci_msix_isr(int vec, void *data) { struct isci_host *ihost = data; @@ -74,6 +254,411 @@ irqreturn_t isci_msix_isr(int vec, void *data) return IRQ_HANDLED; } +static bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + interrupt_status = + readl(&scic->smu_registers->interrupt_status); + interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); + + if (interrupt_status != 0) { + /* + * There is an error interrupt pending so let it through and handle + * in the callback */ + return true; + } + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the error interrupts so if there was another interrupt + * pending we will be notified. + * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ + writel(0xff, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); + + return false; +} + +static void scic_sds_controller_task_completion(struct scic_sds_controller *scic, + u32 completion_entry) +{ + u32 index; + struct scic_sds_request *io_request; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + io_request = scic->io_request_table[index]; + + /* Make sure that we really want to process this IO request */ + if ( + (io_request != NULL) + && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) + && ( + scic_sds_io_tag_get_sequence(io_request->io_tag) + == scic->io_request_sequence[index] + ) + ) { + /* Yep this is a valid io request pass it along to the io request handler */ + scic_sds_io_request_tc_completion(io_request, completion_entry); + } +} + +static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic, + u32 completion_entry) +{ + u32 index; + struct scic_sds_request *io_request; + struct scic_sds_remote_device *device; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + switch (scu_get_command_request_type(completion_entry)) { + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: + io_request = scic->io_request_table[index]; + dev_warn(scic_to_dev(scic), + "%s: SCIC SDS Completion type SDMA %x for io request " + "%p\n", + __func__, + completion_entry, + io_request); + /* @todo For a post TC operation we need to fail the IO + * request + */ + break; + + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: + device = scic->device_table[index]; + dev_warn(scic_to_dev(scic), + "%s: SCIC SDS Completion type SDMA %x for remote " + "device %p\n", + __func__, + completion_entry, + device); + /* @todo For a port RNC operation we need to fail the + * device + */ + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC SDS Completion unknown SDMA completion " + "type %x\n", + __func__, + completion_entry); + break; + + } +} + +static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic, + u32 completion_entry) +{ + u32 index; + u32 frame_index; + + struct isci_host *ihost = scic_to_ihost(scic); + struct scu_unsolicited_frame_header *frame_header; + struct scic_sds_phy *phy; + struct scic_sds_remote_device *device; + + enum sci_status result = SCI_FAILURE; + + frame_index = SCU_GET_FRAME_INDEX(completion_entry); + + frame_header = scic->uf_control.buffers.array[frame_index].header; + scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; + + if (SCU_GET_FRAME_ERROR(completion_entry)) { + /* + * / @todo If the IAF frame or SIGNATURE FIS frame has an error will + * / this cause a problem? We expect the phy initialization will + * / fail if there is an error in the frame. */ + scic_sds_controller_release_frame(scic, frame_index); + return; + } + + if (frame_header->is_address_frame) { + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &ihost->phys[index].sci; + result = scic_sds_phy_frame_handler(phy, frame_index); + } else { + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + /* + * This is a signature fis or a frame from a direct attached SATA + * device that has not yet been created. In either case forwared + * the frame to the PE and let it take care of the frame data. */ + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &ihost->phys[index].sci; + result = scic_sds_phy_frame_handler(phy, frame_index); + } else { + if (index < scic->remote_node_entries) + device = scic->device_table[index]; + else + device = NULL; + + if (device != NULL) + result = scic_sds_remote_device_frame_handler(device, frame_index); + else + scic_sds_controller_release_frame(scic, frame_index); + } + } + + if (result != SCI_SUCCESS) { + /* + * / @todo Is there any reason to report some additional error message + * / when we get this failure notifiction? */ + } +} + +static void scic_sds_controller_event_completion(struct scic_sds_controller *scic, + u32 completion_entry) +{ + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_request *io_request; + struct scic_sds_remote_device *device; + struct scic_sds_phy *phy; + u32 index; + + index = SCU_GET_COMPLETION_INDEX(completion_entry); + + switch (scu_get_event_type(completion_entry)) { + case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: + /* / @todo The driver did something wrong and we need to fix the condtion. */ + dev_err(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received SMU command error " + "0x%x\n", + __func__, + scic, + completion_entry); + break; + + case SCU_EVENT_TYPE_SMU_PCQ_ERROR: + case SCU_EVENT_TYPE_SMU_ERROR: + case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR: + /* + * / @todo This is a hardware failure and its likely that we want to + * / reset the controller. */ + dev_err(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received fatal controller " + "event 0x%x\n", + __func__, + scic, + completion_entry); + break; + + case SCU_EVENT_TYPE_TRANSPORT_ERROR: + io_request = scic->io_request_table[index]; + scic_sds_io_request_event_handler(io_request, completion_entry); + break; + + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + switch (scu_get_event_specifier(completion_entry)) { + case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: + case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: + io_request = scic->io_request_table[index]; + if (io_request != NULL) + scic_sds_io_request_event_handler(io_request, completion_entry); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received " + "event 0x%x for io request object " + "that doesnt exist.\n", + __func__, + scic, + completion_entry); + + break; + + case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: + device = scic->device_table[index]; + if (device != NULL) + scic_sds_remote_device_event_handler(device, completion_entry); + else + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received " + "event 0x%x for remote device object " + "that doesnt exist.\n", + __func__, + scic, + completion_entry); + + break; + } + break; + + case SCU_EVENT_TYPE_BROADCAST_CHANGE: + /* + * direct the broadcast change event to the phy first and then let + * the phy redirect the broadcast change to the port object */ + case SCU_EVENT_TYPE_ERR_CNT_EVENT: + /* + * direct error counter event to the phy object since that is where + * we get the event notification. This is a type 4 event. */ + case SCU_EVENT_TYPE_OSSP_EVENT: + index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + phy = &ihost->phys[index].sci; + scic_sds_phy_event_handler(phy, completion_entry); + break; + + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + case SCU_EVENT_TYPE_RNC_OPS_MISC: + if (index < scic->remote_node_entries) { + device = scic->device_table[index]; + + if (device != NULL) + scic_sds_remote_device_event_handler(device, completion_entry); + } else + dev_err(scic_to_dev(scic), + "%s: SCIC Controller 0x%p received event 0x%x " + "for remote device object 0x%0x that doesnt " + "exist.\n", + __func__, + scic, + completion_entry, + index); + + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller received unknown event code %x\n", + __func__, + completion_entry); + break; + } +} + + + +static void scic_sds_controller_process_completions(struct scic_sds_controller *scic) +{ + u32 completion_count = 0; + u32 completion_entry; + u32 get_index; + u32 get_cycle; + u32 event_index; + u32 event_cycle; + + dev_dbg(scic_to_dev(scic), + "%s: completion queue begining get:0x%08x\n", + __func__, + scic->completion_queue_get); + + /* Get the component parts of the completion queue */ + get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get); + get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get; + + event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get); + event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get; + + while ( + NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) + == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]) + ) { + completion_count++; + + completion_entry = scic->completion_queue[get_index]; + INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle); + + dev_dbg(scic_to_dev(scic), + "%s: completion queue entry:0x%08x\n", + __func__, + completion_entry); + + switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { + case SCU_COMPLETION_TYPE_TASK: + scic_sds_controller_task_completion(scic, completion_entry); + break; + + case SCU_COMPLETION_TYPE_SDMA: + scic_sds_controller_sdma_completion(scic, completion_entry); + break; + + case SCU_COMPLETION_TYPE_UFI: + scic_sds_controller_unsolicited_frame(scic, completion_entry); + break; + + case SCU_COMPLETION_TYPE_EVENT: + INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); + scic_sds_controller_event_completion(scic, completion_entry); + break; + + case SCU_COMPLETION_TYPE_NOTIFY: + /* + * Presently we do the same thing with a notify event that we do with the + * other event codes. */ + INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); + scic_sds_controller_event_completion(scic, completion_entry); + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller received unknown " + "completion type %x\n", + __func__, + completion_entry); + break; + } + } + + /* Update the get register if we completed one or more entries */ + if (completion_count > 0) { + scic->completion_queue_get = + SMU_CQGR_GEN_BIT(ENABLE) | + SMU_CQGR_GEN_BIT(EVENT_ENABLE) | + event_cycle | + SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) | + get_cycle | + SMU_CQGR_GEN_VAL(POINTER, get_index); + + writel(scic->completion_queue_get, + &scic->smu_registers->completion_queue_get); + + } + + dev_dbg(scic_to_dev(scic), + "%s: completion queue ending get:0x%08x\n", + __func__, + scic->completion_queue_get); + +} + +static void scic_sds_controller_error_handler(struct scic_sds_controller *scic) +{ + u32 interrupt_status; + + interrupt_status = + readl(&scic->smu_registers->interrupt_status); + + if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && + scic_sds_controller_completion_queue_has_entries(scic)) { + + scic_sds_controller_process_completions(scic); + writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status); + } else { + dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, + interrupt_status); + + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_FAILED); + + return; + } + + /* If we dont process any completions I am not sure that we want to do this. + * We are in the middle of a hardware fault and should probably be reset. + */ + writel(0, &scic->smu_registers->interrupt_mask); +} + irqreturn_t isci_intx_isr(int vec, void *data) { irqreturn_t ret = IRQ_NONE; @@ -112,7 +697,7 @@ irqreturn_t isci_error_isr(int vec, void *data) * core library. * */ -void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status) +static void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status) { if (completion_status != SCI_SUCCESS) dev_info(&ihost->pdev->dev, @@ -142,6 +727,383 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) } +/** + * scic_controller_get_suggested_start_timeout() - This method returns the + * suggested scic_controller_start() timeout amount. The user is free to + * use any timeout value, but this method provides the suggested minimum + * start timeout value. The returned value is based upon empirical + * information determined as a result of interoperability testing. + * @controller: the handle to the controller object for which to return the + * suggested start timeout. + * + * This method returns the number of milliseconds for the suggested start + * operation timeout. + */ +static u32 scic_controller_get_suggested_start_timeout( + struct scic_sds_controller *sc) +{ + /* Validate the user supplied parameters. */ + if (sc == NULL) + return 0; + + /* + * The suggested minimum timeout value for a controller start operation: + * + * Signature FIS Timeout + * + Phy Start Timeout + * + Number of Phy Spin Up Intervals + * --------------------------------- + * Number of milliseconds for the controller start operation. + * + * NOTE: The number of phy spin up intervals will be equivalent + * to the number of phys divided by the number phys allowed + * per interval - 1 (once OEM parameters are supported). + * Currently we assume only 1 phy per interval. */ + + return SCIC_SDS_SIGNATURE_FIS_TIMEOUT + + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT + + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); +} + +static void scic_controller_enable_interrupts( + struct scic_sds_controller *scic) +{ + BUG_ON(scic->smu_registers == NULL); + writel(0, &scic->smu_registers->interrupt_mask); +} + +void scic_controller_disable_interrupts( + struct scic_sds_controller *scic) +{ + BUG_ON(scic->smu_registers == NULL); + writel(0xffffffff, &scic->smu_registers->interrupt_mask); +} + +static void scic_sds_controller_enable_port_task_scheduler( + struct scic_sds_controller *scic) +{ + u32 port_task_scheduler_value; + + port_task_scheduler_value = + readl(&scic->scu_registers->peg0.ptsg.control); + port_task_scheduler_value |= + (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | + SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); + writel(port_task_scheduler_value, + &scic->scu_registers->peg0.ptsg.control); +} + +static void scic_sds_controller_assign_task_entries(struct scic_sds_controller *scic) +{ + u32 task_assignment; + + /* + * Assign all the TCs to function 0 + * TODO: Do we actually need to read this register to write it back? + */ + + task_assignment = + readl(&scic->smu_registers->task_context_assignment[0]); + + task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | + (SMU_TCA_GEN_VAL(ENDING, scic->task_context_entries - 1)) | + (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); + + writel(task_assignment, + &scic->smu_registers->task_context_assignment[0]); + +} + +static void scic_sds_controller_initialize_completion_queue(struct scic_sds_controller *scic) +{ + u32 index; + u32 completion_queue_control_value; + u32 completion_queue_get_value; + u32 completion_queue_put_value; + + scic->completion_queue_get = 0; + + completion_queue_control_value = ( + SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1) + | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1) + ); + + writel(completion_queue_control_value, + &scic->smu_registers->completion_queue_control); + + + /* Set the completion queue get pointer and enable the queue */ + completion_queue_get_value = ( + (SMU_CQGR_GEN_VAL(POINTER, 0)) + | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0)) + | (SMU_CQGR_GEN_BIT(ENABLE)) + | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) + ); + + writel(completion_queue_get_value, + &scic->smu_registers->completion_queue_get); + + /* Set the completion queue put pointer */ + completion_queue_put_value = ( + (SMU_CQPR_GEN_VAL(POINTER, 0)) + | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) + ); + + writel(completion_queue_put_value, + &scic->smu_registers->completion_queue_put); + + /* Initialize the cycle bit of the completion queue entries */ + for (index = 0; index < scic->completion_queue_entries; index++) { + /* + * If get.cycle_bit != completion_queue.cycle_bit + * its not a valid completion queue entry + * so at system start all entries are invalid */ + scic->completion_queue[index] = 0x80000000; + } +} + +static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_sds_controller *scic) +{ + u32 frame_queue_control_value; + u32 frame_queue_get_value; + u32 frame_queue_put_value; + + /* Write the queue size */ + frame_queue_control_value = + SCU_UFQC_GEN_VAL(QUEUE_SIZE, + scic->uf_control.address_table.count); + + writel(frame_queue_control_value, + &scic->scu_registers->sdma.unsolicited_frame_queue_control); + + /* Setup the get pointer for the unsolicited frame queue */ + frame_queue_get_value = ( + SCU_UFQGP_GEN_VAL(POINTER, 0) + | SCU_UFQGP_GEN_BIT(ENABLE_BIT) + ); + + writel(frame_queue_get_value, + &scic->scu_registers->sdma.unsolicited_frame_get_pointer); + /* Setup the put pointer for the unsolicited frame queue */ + frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); + writel(frame_queue_put_value, + &scic->scu_registers->sdma.unsolicited_frame_put_pointer); +} + +/** + * This method will attempt to transition into the ready state for the + * controller and indicate that the controller start operation has completed + * if all criteria are met. + * @scic: This parameter indicates the controller object for which + * to transition to ready. + * @status: This parameter indicates the status value to be pass into the call + * to scic_cb_controller_start_complete(). + * + * none. + */ +static void scic_sds_controller_transition_to_ready( + struct scic_sds_controller *scic, + enum sci_status status) +{ + struct isci_host *ihost = scic_to_ihost(scic); + + if (scic->state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_STARTING) { + /* + * We move into the ready state, because some of the phys/ports + * may be up and operational. + */ + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_READY); + + isci_host_start_complete(ihost, status); + } +} + +static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic) +{ + isci_timer_stop(scic->phy_startup_timer); + + scic->phy_startup_timer_pending = false; +} + +static void scic_sds_controller_phy_timer_start(struct scic_sds_controller *scic) +{ + isci_timer_start(scic->phy_startup_timer, + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); + + scic->phy_startup_timer_pending = true; +} + +/** + * scic_sds_controller_start_next_phy - start phy + * @scic: controller + * + * If all the phys have been started, then attempt to transition the + * controller to the READY state and inform the user + * (scic_cb_controller_start_complete()). + */ +static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) +{ + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; + struct scic_sds_phy *sci_phy; + enum sci_status status; + + status = SCI_SUCCESS; + + if (scic->phy_startup_timer_pending) + return status; + + if (scic->next_phy_to_start >= SCI_MAX_PHYS) { + bool is_controller_start_complete = true; + u32 state; + u8 index; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + sci_phy = &ihost->phys[index].sci; + state = sci_phy->state_machine.current_state_id; + + if (!scic_sds_phy_get_port(sci_phy)) + continue; + + /* The controller start operation is complete iff: + * - all links have been given an opportunity to start + * - have no indication of a connected device + * - have an indication of a connected device and it has + * finished the link training process. + */ + if ((sci_phy->is_in_link_training == false && + state == SCI_BASE_PHY_STATE_INITIAL) || + (sci_phy->is_in_link_training == false && + state == SCI_BASE_PHY_STATE_STOPPED) || + (sci_phy->is_in_link_training == true && + state == SCI_BASE_PHY_STATE_STARTING)) { + is_controller_start_complete = false; + break; + } + } + + /* + * The controller has successfully finished the start process. + * Inform the SCI Core user and transition to the READY state. */ + if (is_controller_start_complete == true) { + scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS); + scic_sds_controller_phy_timer_stop(scic); + } + } else { + sci_phy = &ihost->phys[scic->next_phy_to_start].sci; + + if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + if (scic_sds_phy_get_port(sci_phy) == NULL) { + scic->next_phy_to_start++; + + /* Caution recursion ahead be forwarned + * + * The PHY was never added to a PORT in MPC mode + * so start the next phy in sequence This phy + * will never go link up and will not draw power + * the OEM parameters either configured the phy + * incorrectly for the PORT or it was never + * assigned to a PORT + */ + return scic_sds_controller_start_next_phy(scic); + } + } + + status = scic_sds_phy_start(sci_phy); + + if (status == SCI_SUCCESS) { + scic_sds_controller_phy_timer_start(scic); + } else { + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed " + "to stop phy %d because of status " + "%d.\n", + __func__, + ihost->phys[scic->next_phy_to_start].sci.phy_index, + status); + } + + scic->next_phy_to_start++; + } + + return status; +} + +static void scic_sds_controller_phy_startup_timeout_handler(void *_scic) +{ + struct scic_sds_controller *scic = _scic; + enum sci_status status; + + scic->phy_startup_timer_pending = false; + status = SCI_FAILURE; + while (status != SCI_SUCCESS) + status = scic_sds_controller_start_next_phy(scic); +} + +static enum sci_status scic_controller_start(struct scic_sds_controller *scic, + u32 timeout) +{ + struct isci_host *ihost = scic_to_ihost(scic); + enum sci_status result; + u16 index; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + dev_warn(scic_to_dev(scic), + "SCIC Controller start operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + /* Build the TCi free pool */ + sci_pool_initialize(scic->tci_pool); + for (index = 0; index < scic->task_context_entries; index++) + sci_pool_put(scic->tci_pool, index); + + /* Build the RNi free pool */ + scic_sds_remote_node_table_initialize( + &scic->available_remote_nodes, + scic->remote_node_entries); + + /* + * Before anything else lets make sure we will not be + * interrupted by the hardware. + */ + scic_controller_disable_interrupts(scic); + + /* Enable the port task scheduler */ + scic_sds_controller_enable_port_task_scheduler(scic); + + /* Assign all the task entries to scic physical function */ + scic_sds_controller_assign_task_entries(scic); + + /* Now initialize the completion queue */ + scic_sds_controller_initialize_completion_queue(scic); + + /* Initialize the unsolicited frame queue for use */ + scic_sds_controller_initialize_unsolicited_frame_queue(scic); + + /* Start all of the ports on this controller */ + for (index = 0; index < scic->logical_port_entries; index++) { + struct scic_sds_port *sci_port = &ihost->ports[index].sci; + + result = sci_port->state_handlers->start_handler(sci_port); + if (result) + return result; + } + + scic_sds_controller_start_next_phy(scic); + + isci_timer_start(scic->timeout_timer, timeout); + + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STARTING); + + return SCI_SUCCESS; +} + void isci_host_scan_start(struct Scsi_Host *shost) { struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; @@ -155,7 +1117,7 @@ void isci_host_scan_start(struct Scsi_Host *shost) spin_unlock_irq(&ihost->scic_lock); } -void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) +static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) { isci_host_change_state(ihost, isci_stopped); scic_controller_disable_interrupts(&ihost->sci); @@ -163,6 +1125,19 @@ void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion wake_up(&ihost->eventq); } +static void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) +{ + /* Empty out the completion queue */ + if (scic_sds_controller_completion_queue_has_entries(scic)) + scic_sds_controller_process_completions(scic); + + /* Clear the interrupt and enable all interrupts again */ + writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); + /* Could we write the value of SMU_ISR_COMPLETION? */ + writel(0xFF000000, &scic->smu_registers->interrupt_mask); + writel(0, &scic->smu_registers->interrupt_mask); +} + /** * isci_host_completion_routine() - This function is the delayed service * routine that calls the sci core library's completion handler. It's @@ -273,11 +1248,80 @@ static void isci_host_completion_routine(unsigned long data) } -void isci_host_deinit(struct isci_host *ihost) +/** + * scic_controller_stop() - This method will stop an individual controller + * object.This method will invoke the associated user callback upon + * completion. The completion callback is called when the following + * conditions are met: -# the method return status is SCI_SUCCESS. -# the + * controller has been quiesced. This method will ensure that all IO + * requests are quiesced, phys are stopped, and all additional operation by + * the hardware is halted. + * @controller: the handle to the controller object to stop. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * The controller must be in the STARTED or STOPPED state. Indicate if the + * controller stop method succeeded or failed in some way. SCI_SUCCESS if the + * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the + * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the + * controller is not either in the STARTED or STOPPED states. + */ +static enum sci_status scic_controller_stop(struct scic_sds_controller *scic, + u32 timeout) { - int i; + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), + "SCIC Controller stop operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } - isci_host_change_state(ihost, isci_stopping); + isci_timer_start(scic->timeout_timer, timeout); + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STOPPING); + return SCI_SUCCESS; +} + +/** + * scic_controller_reset() - This method will reset the supplied core + * controller regardless of the state of said controller. This operation is + * considered destructive. In other words, all current operations are wiped + * out. No IO completions for outstanding devices occur. Outstanding IO + * requests are not aborted or completed at the actual remote device. + * @controller: the handle to the controller object to reset. + * + * Indicate if the controller reset method succeeded or failed in some way. + * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if + * the controller reset operation is unable to complete. + */ +static enum sci_status scic_controller_reset(struct scic_sds_controller *scic) +{ + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_RESET: + case SCI_BASE_CONTROLLER_STATE_READY: + case SCI_BASE_CONTROLLER_STATE_STOPPED: + case SCI_BASE_CONTROLLER_STATE_FAILED: + /* + * The reset operation is not a graceful cleanup, just + * perform the state transition. + */ + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_RESETTING); + return SCI_SUCCESS; + default: + dev_warn(scic_to_dev(scic), + "SCIC Controller reset operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } +} + +void isci_host_deinit(struct isci_host *ihost) +{ + int i; + + isci_host_change_state(ihost, isci_stopping); for (i = 0; i < SCI_MAX_PORTS; i++) { struct isci_port *iport = &ihost->ports[i]; struct isci_remote_device *idev, *d; @@ -341,6 +1385,1109 @@ static void isci_user_parameters_get( u->max_number_concurrent_device_spin_up = max_concurr_spinup; } +static void scic_sds_controller_initial_state_enter(void *object) +{ + struct scic_sds_controller *scic = object; + + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_RESET); +} + +static inline void scic_sds_controller_starting_state_exit(void *object) +{ + struct scic_sds_controller *scic = object; + + isci_timer_stop(scic->timeout_timer); +} + +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280 +#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000 +#define INTERRUPT_COALESCE_NUMBER_MAX 256 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 + +/** + * scic_controller_set_interrupt_coalescence() - This method allows the user to + * configure the interrupt coalescence. + * @controller: This parameter represents the handle to the controller object + * for which its interrupt coalesce register is overridden. + * @coalesce_number: Used to control the number of entries in the Completion + * Queue before an interrupt is generated. If the number of entries exceed + * this number, an interrupt will be generated. The valid range of the input + * is [0, 256]. A setting of 0 results in coalescing being disabled. + * @coalesce_timeout: Timeout value in microseconds. The valid range of the + * input is [0, 2700000] . A setting of 0 is allowed and results in no + * interrupt coalescing timeout. + * + * Indicate if the user successfully set the interrupt coalesce parameters. + * SCI_SUCCESS The user successfully updated the interrutp coalescence. + * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. + */ +static enum sci_status scic_controller_set_interrupt_coalescence( + struct scic_sds_controller *scic_controller, + u32 coalesce_number, + u32 coalesce_timeout) +{ + u8 timeout_encode = 0; + u32 min = 0; + u32 max = 0; + + /* Check if the input parameters fall in the range. */ + if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + /* + * Defined encoding for interrupt coalescing timeout: + * Value Min Max Units + * ----- --- --- ----- + * 0 - - Disabled + * 1 13.3 20.0 ns + * 2 26.7 40.0 + * 3 53.3 80.0 + * 4 106.7 160.0 + * 5 213.3 320.0 + * 6 426.7 640.0 + * 7 853.3 1280.0 + * 8 1.7 2.6 us + * 9 3.4 5.1 + * 10 6.8 10.2 + * 11 13.7 20.5 + * 12 27.3 41.0 + * 13 54.6 81.9 + * 14 109.2 163.8 + * 15 218.5 327.7 + * 16 436.9 655.4 + * 17 873.8 1310.7 + * 18 1.7 2.6 ms + * 19 3.5 5.2 + * 20 7.0 10.5 + * 21 14.0 21.0 + * 22 28.0 41.9 + * 23 55.9 83.9 + * 24 111.8 167.8 + * 25 223.7 335.5 + * 26 447.4 671.1 + * 27 894.8 1342.2 + * 28 1.8 2.7 s + * Others Undefined */ + + /* + * Use the table above to decide the encode of interrupt coalescing timeout + * value for register writing. */ + if (coalesce_timeout == 0) + timeout_encode = 0; + else{ + /* make the timeout value in unit of (10 ns). */ + coalesce_timeout = coalesce_timeout * 100; + min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10; + max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10; + + /* get the encode of timeout for register writing. */ + for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN; + timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX; + timeout_encode++) { + if (min <= coalesce_timeout && max > coalesce_timeout) + break; + else if (coalesce_timeout >= max && coalesce_timeout < min * 2 + && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) { + if ((coalesce_timeout - max) < (2 * min - coalesce_timeout)) + break; + else{ + timeout_encode++; + break; + } + } else { + max = max * 2; + min = min * 2; + } + } + + if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1) + /* the value is out of range. */ + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | + SMU_ICC_GEN_VAL(TIMER, timeout_encode), + &scic_controller->smu_registers->interrupt_coalesce_control); + + + scic_controller->interrupt_coalesce_number = (u16)coalesce_number; + scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100; + + return SCI_SUCCESS; +} + + +static void scic_sds_controller_ready_state_enter(void *object) +{ + struct scic_sds_controller *scic = object; + + /* set the default interrupt coalescence number and timeout value. */ + scic_controller_set_interrupt_coalescence(scic, 0x10, 250); +} + +static void scic_sds_controller_ready_state_exit(void *object) +{ + struct scic_sds_controller *scic = object; + + /* disable interrupt coalescence. */ + scic_controller_set_interrupt_coalescence(scic, 0, 0); +} + +static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic) +{ + u32 index; + enum sci_status status; + enum sci_status phy_status; + struct isci_host *ihost = scic_to_ihost(scic); + + status = SCI_SUCCESS; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy_status = scic_sds_phy_stop(&ihost->phys[index].sci); + + if (phy_status != SCI_SUCCESS && + phy_status != SCI_FAILURE_INVALID_STATE) { + status = SCI_FAILURE; + + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed to stop " + "phy %d because of status %d.\n", + __func__, + ihost->phys[index].sci.phy_index, phy_status); + } + } + + return status; +} + +static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) +{ + u32 index; + enum sci_status port_status; + enum sci_status status = SCI_SUCCESS; + struct isci_host *ihost = scic_to_ihost(scic); + + for (index = 0; index < scic->logical_port_entries; index++) { + struct scic_sds_port *sci_port = &ihost->ports[index].sci; + scic_sds_port_handler_t stop; + + stop = sci_port->state_handlers->stop_handler; + port_status = stop(sci_port); + + if ((port_status != SCI_SUCCESS) && + (port_status != SCI_FAILURE_INVALID_STATE)) { + status = SCI_FAILURE; + + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed to " + "stop port %d because of status %d.\n", + __func__, + sci_port->logical_port_index, + port_status); + } + } + + return status; +} + +static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic) +{ + u32 index; + enum sci_status status; + enum sci_status device_status; + + status = SCI_SUCCESS; + + for (index = 0; index < scic->remote_node_entries; index++) { + if (scic->device_table[index] != NULL) { + /* / @todo What timeout value do we want to provide to this request? */ + device_status = scic_remote_device_stop(scic->device_table[index], 0); + + if ((device_status != SCI_SUCCESS) && + (device_status != SCI_FAILURE_INVALID_STATE)) { + dev_warn(scic_to_dev(scic), + "%s: Controller stop operation failed " + "to stop device 0x%p because of " + "status %d.\n", + __func__, + scic->device_table[index], device_status); + } + } + } + + return status; +} + +static void scic_sds_controller_stopping_state_enter(void *object) +{ + struct scic_sds_controller *scic = object; + + /* Stop all of the components for this controller */ + scic_sds_controller_stop_phys(scic); + scic_sds_controller_stop_ports(scic); + scic_sds_controller_stop_devices(scic); +} + +static void scic_sds_controller_stopping_state_exit(void *object) +{ + struct scic_sds_controller *scic = object; + + isci_timer_stop(scic->timeout_timer); +} + + +/** + * scic_sds_controller_reset_hardware() - + * + * This method will reset the controller hardware. + */ +static void scic_sds_controller_reset_hardware(struct scic_sds_controller *scic) +{ + /* Disable interrupts so we dont take any spurious interrupts */ + scic_controller_disable_interrupts(scic); + + /* Reset the SCU */ + writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control); + + /* Delay for 1ms to before clearing the CQP and UFQPR. */ + udelay(1000); + + /* The write to the CQGR clears the CQP */ + writel(0x00000000, &scic->smu_registers->completion_queue_get); + + /* The write to the UFQGP clears the UFQPR */ + writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer); +} + +static void scic_sds_controller_resetting_state_enter(void *object) +{ + struct scic_sds_controller *scic = object; + + scic_sds_controller_reset_hardware(scic); + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_RESET); +} + +static const struct sci_base_state scic_sds_controller_state_table[] = { + [SCI_BASE_CONTROLLER_STATE_INITIAL] = { + .enter_state = scic_sds_controller_initial_state_enter, + }, + [SCI_BASE_CONTROLLER_STATE_RESET] = {}, + [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {}, + [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {}, + [SCI_BASE_CONTROLLER_STATE_STARTING] = { + .exit_state = scic_sds_controller_starting_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_READY] = { + .enter_state = scic_sds_controller_ready_state_enter, + .exit_state = scic_sds_controller_ready_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_RESETTING] = { + .enter_state = scic_sds_controller_resetting_state_enter, + }, + [SCI_BASE_CONTROLLER_STATE_STOPPING] = { + .enter_state = scic_sds_controller_stopping_state_enter, + .exit_state = scic_sds_controller_stopping_state_exit, + }, + [SCI_BASE_CONTROLLER_STATE_STOPPED] = {}, + [SCI_BASE_CONTROLLER_STATE_FAILED] = {} +}; + +static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) +{ + /* these defaults are overridden by the platform / firmware */ + struct isci_host *ihost = scic_to_ihost(scic); + u16 index; + + /* Default to APC mode. */ + scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; + + /* Default to APC mode. */ + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1; + + /* Default to no SSC operation. */ + scic->oem_parameters.sds1.controller.do_enable_ssc = false; + + /* Initialize all of the port parameter information to narrow ports. */ + for (index = 0; index < SCI_MAX_PORTS; index++) { + scic->oem_parameters.sds1.ports[index].phy_mask = 0; + } + + /* Initialize all of the phy parameter information. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* Default to 6G (i.e. Gen 3) for now. */ + scic->user_parameters.sds1.phys[index].max_speed_generation = 3; + + /* the frequencies cannot be 0 */ + scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; + scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff; + scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; + + /* + * Previous Vitesse based expanders had a arbitration issue that + * is worked around by having the upper 32-bits of SAS address + * with a value greater then the Vitesse company identifier. + * Hence, usage of 0x5FCFFFFF. */ + scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id; + scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; + } + + scic->user_parameters.sds1.stp_inactivity_timeout = 5; + scic->user_parameters.sds1.ssp_inactivity_timeout = 5; + scic->user_parameters.sds1.stp_max_occupancy_timeout = 5; + scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20; + scic->user_parameters.sds1.no_outbound_task_timeout = 20; +} + + + +/** + * scic_controller_construct() - This method will attempt to construct a + * controller object utilizing the supplied parameter information. + * @c: This parameter specifies the controller to be constructed. + * @scu_base: mapped base address of the scu registers + * @smu_base: mapped base address of the smu registers + * + * Indicate if the controller was successfully constructed or if it failed in + * some way. SCI_SUCCESS This value is returned if the controller was + * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned + * if the interrupt coalescence timer may cause SAS compliance issues for SMP + * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE + * This value is returned if the controller does not support the supplied type. + * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the + * controller does not support the supplied initialization data version. + */ +static enum sci_status scic_controller_construct(struct scic_sds_controller *scic, + void __iomem *scu_base, + void __iomem *smu_base) +{ + struct isci_host *ihost = scic_to_ihost(scic); + u8 i; + + sci_base_state_machine_construct(&scic->state_machine, + scic, scic_sds_controller_state_table, + SCI_BASE_CONTROLLER_STATE_INITIAL); + + sci_base_state_machine_start(&scic->state_machine); + + scic->scu_registers = scu_base; + scic->smu_registers = smu_base; + + scic_sds_port_configuration_agent_construct(&scic->port_agent); + + /* Construct the ports for this controller */ + for (i = 0; i < SCI_MAX_PORTS; i++) + scic_sds_port_construct(&ihost->ports[i].sci, i, scic); + scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic); + + /* Construct the phys for this controller */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + /* Add all the PHYs to the dummy port */ + scic_sds_phy_construct(&ihost->phys[i].sci, + &ihost->ports[SCI_MAX_PORTS].sci, i); + } + + scic->invalid_phy_mask = 0; + + /* Set the default maximum values */ + scic->completion_event_entries = SCU_EVENT_COUNT; + scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; + scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; + scic->logical_port_entries = SCI_MAX_PORTS; + scic->task_context_entries = SCU_IO_REQUEST_COUNT; + scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT; + scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT; + + /* Initialize the User and OEM parameters to default values. */ + scic_sds_controller_set_default_config_parameters(scic); + + return scic_controller_reset(scic); +} + +int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) +{ + int i; + + for (i = 0; i < SCI_MAX_PORTS; i++) + if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) + return -EINVAL; + + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->phys[i].sas_address.high == 0 && + oem->phys[i].sas_address.low == 0) + return -EINVAL; + + if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->ports[i].phy_mask != 0) + return -EINVAL; + } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + u8 phy_mask = 0; + + for (i = 0; i < SCI_MAX_PHYS; i++) + phy_mask |= oem->ports[i].phy_mask; + + if (phy_mask == 0) + return -EINVAL; + } else + return -EINVAL; + + if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + return -EINVAL; + + return 0; +} + +static enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, + union scic_oem_parameters *scic_parms) +{ + u32 state = scic->state_machine.current_state_id; + + if (state == SCI_BASE_CONTROLLER_STATE_RESET || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + + if (scic_oem_parameters_validate(&scic_parms->sds1)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + scic->oem_parameters.sds1 = scic_parms->sds1; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +void scic_oem_parameters_get( + struct scic_sds_controller *scic, + union scic_oem_parameters *scic_parms) +{ + memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); +} + +static void scic_sds_controller_timeout_handler(void *_scic) +{ + struct scic_sds_controller *scic = _scic; + struct isci_host *ihost = scic_to_ihost(scic); + struct sci_base_state_machine *sm = &scic->state_machine; + + if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) + scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); + else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) { + sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED); + isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); + } else /* / @todo Now what do we want to do in this case? */ + dev_err(scic_to_dev(scic), + "%s: Controller timer fired when controller was not " + "in a state being timed.\n", + __func__); +} + +static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) +{ + struct isci_host *ihost = scic_to_ihost(scic); + + scic->phy_startup_timer = isci_timer_create(ihost, + scic, + scic_sds_controller_phy_startup_timeout_handler); + + if (scic->phy_startup_timer == NULL) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + else { + scic->next_phy_to_start = 0; + scic->phy_startup_timer_pending = false; + } + + return SCI_SUCCESS; +} + +static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic) +{ + isci_timer_start(scic->power_control.timer, + SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + + scic->power_control.timer_started = true; +} + +static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic) +{ + if (scic->power_control.timer_started) { + isci_timer_stop(scic->power_control.timer); + scic->power_control.timer_started = false; + } +} + +static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic) +{ + scic_sds_controller_power_control_timer_stop(scic); + scic_sds_controller_power_control_timer_start(scic); +} + +static void scic_sds_controller_power_control_timer_handler( + void *controller) +{ + struct scic_sds_controller *scic; + + scic = (struct scic_sds_controller *)controller; + + scic->power_control.phys_granted_power = 0; + + if (scic->power_control.phys_waiting == 0) { + scic->power_control.timer_started = false; + } else { + struct scic_sds_phy *sci_phy = NULL; + u8 i; + + for (i = 0; + (i < SCI_MAX_PHYS) + && (scic->power_control.phys_waiting != 0); + i++) { + if (scic->power_control.requesters[i] != NULL) { + if (scic->power_control.phys_granted_power < + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + sci_phy = scic->power_control.requesters[i]; + scic->power_control.requesters[i] = NULL; + scic->power_control.phys_waiting--; + scic->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(sci_phy); + } else { + break; + } + } + } + + /* + * It doesn't matter if the power list is empty, we need to start the + * timer in case another phy becomes ready. + */ + scic_sds_controller_power_control_timer_start(scic); + } +} + +/** + * This method inserts the phy in the stagger spinup control queue. + * @scic: + * + * + */ +void scic_sds_controller_power_control_queue_insert( + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy) +{ + BUG_ON(sci_phy == NULL); + + if (scic->power_control.phys_granted_power < + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + scic->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(sci_phy); + + /* + * stop and start the power_control timer. When the timer fires, the + * no_of_phys_granted_power will be set to 0 + */ + scic_sds_controller_power_control_timer_restart(scic); + } else { + /* Add the phy in the waiting list */ + scic->power_control.requesters[sci_phy->phy_index] = sci_phy; + scic->power_control.phys_waiting++; + } +} + +/** + * This method removes the phy from the stagger spinup control queue. + * @scic: + * + * + */ +void scic_sds_controller_power_control_queue_remove( + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy) +{ + BUG_ON(sci_phy == NULL); + + if (scic->power_control.requesters[sci_phy->phy_index] != NULL) { + scic->power_control.phys_waiting--; + } + + scic->power_control.requesters[sci_phy->phy_index] = NULL; +} + +#define AFE_REGISTER_WRITE_DELAY 10 + +/* Initialize the AFE for this phy index. We need to read the AFE setup from + * the OEM parameters + */ +static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) +{ + const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; + u32 afe_status; + u32 phy_id; + + /* Clear DFX Status registers */ + writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + if (is_b0()) { + /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement + * Timer, PM Stagger Timer */ + writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* Configure bias currents to normal */ + if (is_a0()) + writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); + else if (is_a2()) + writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); + else if (is_b0()) + writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control); + + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable PLL */ + if (is_b0()) + writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0); + else + writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0); + + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Wait for the PLL to lock */ + do { + afe_status = readl(&scic->scu_registers->afe.afe_common_block_status); + udelay(AFE_REGISTER_WRITE_DELAY); + } while ((afe_status & 0x00001000) == 0); + + if (is_a0() || is_a2()) { + /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ + writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; + + if (is_b0()) { + /* Configure transmitter SSC parameters */ + writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + udelay(AFE_REGISTER_WRITE_DELAY); + } else { + /* + * All defaults, except the Receive Word Alignament/Comma Detect + * Enable....(0xe800) */ + writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + if (is_a0()) + writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + else if (is_a2()) + writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + else { + /* Power down TX and RX (PWRDNTX and PWRDNRX) */ + writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + } + udelay(AFE_REGISTER_WRITE_DELAY); + + if (is_a0() || is_a2()) { + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* + * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), + * RDD=0x0(RX Detect Enabled) ....(0xe800) */ + writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Leave DFE/FFE on */ + if (is_a0()) + writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + else if (is_a2()) + writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + else { + writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + } + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control0, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control1, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control2, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control3, + &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* Transfer control to the PEs */ + writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); +} + +static enum sci_status scic_controller_set_mode(struct scic_sds_controller *scic, + enum sci_controller_mode operating_mode) +{ + enum sci_status status = SCI_SUCCESS; + + if ((scic->state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_INITIALIZING) || + (scic->state_machine.current_state_id == + SCI_BASE_CONTROLLER_STATE_INITIALIZED)) { + switch (operating_mode) { + case SCI_MODE_SPEED: + scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; + scic->task_context_entries = SCU_IO_REQUEST_COUNT; + scic->uf_control.buffers.count = + SCU_UNSOLICITED_FRAME_COUNT; + scic->completion_event_entries = SCU_EVENT_COUNT; + scic->completion_queue_entries = + SCU_COMPLETION_QUEUE_COUNT; + break; + + case SCI_MODE_SIZE: + scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES; + scic->task_context_entries = SCI_MIN_IO_REQUESTS; + scic->uf_control.buffers.count = + SCU_MIN_UNSOLICITED_FRAMES; + scic->completion_event_entries = SCU_MIN_EVENTS; + scic->completion_queue_entries = + SCU_MIN_COMPLETION_QUEUE_ENTRIES; + break; + + default: + status = SCI_FAILURE_INVALID_PARAMETER_VALUE; + break; + } + } else + status = SCI_FAILURE_INVALID_STATE; + + return status; +} + +static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) +{ + struct isci_host *ihost = scic_to_ihost(scic); + scic->power_control.timer = isci_timer_create(ihost, + scic, + scic_sds_controller_power_control_timer_handler); + + memset(scic->power_control.requesters, 0, + sizeof(scic->power_control.requesters)); + + scic->power_control.phys_waiting = 0; + scic->power_control.phys_granted_power = 0; +} + +static enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) +{ + struct sci_base_state_machine *sm = &scic->state_machine; + enum sci_status result = SCI_SUCCESS; + struct isci_host *ihost = scic_to_ihost(scic); + u32 index, state; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_RESET) { + dev_warn(scic_to_dev(scic), + "SCIC Controller initialize operation requested " + "in invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); + + scic->timeout_timer = isci_timer_create(ihost, scic, + scic_sds_controller_timeout_handler); + + scic_sds_controller_initialize_phy_startup(scic); + + scic_sds_controller_initialize_power_control(scic); + + /* + * There is nothing to do here for B0 since we do not have to + * program the AFE registers. + * / @todo The AFE settings are supposed to be correct for the B0 but + * / presently they seem to be wrong. */ + scic_sds_controller_afe_initialization(scic); + + if (result == SCI_SUCCESS) { + u32 status; + u32 terminate_loop; + + /* Take the hardware out of reset */ + writel(0, &scic->smu_registers->soft_reset_control); + + /* + * / @todo Provide meaningfull error code for hardware failure + * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ + result = SCI_FAILURE; + terminate_loop = 100; + + while (terminate_loop-- && (result != SCI_SUCCESS)) { + /* Loop until the hardware reports success */ + udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); + status = readl(&scic->smu_registers->control_status); + + if ((status & SCU_RAM_INIT_COMPLETED) == + SCU_RAM_INIT_COMPLETED) + result = SCI_SUCCESS; + } + } + + if (result == SCI_SUCCESS) { + u32 max_supported_ports; + u32 max_supported_devices; + u32 max_supported_io_requests; + u32 device_context_capacity; + + /* + * Determine what are the actaul device capacities that the + * hardware will support */ + device_context_capacity = + readl(&scic->smu_registers->device_context_capacity); + + + max_supported_ports = smu_dcc_get_max_ports(device_context_capacity); + max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity); + max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity); + + /* + * Make all PEs that are unassigned match up with the + * logical ports + */ + for (index = 0; index < max_supported_ports; index++) { + struct scu_port_task_scheduler_group_registers __iomem + *ptsg = &scic->scu_registers->peg0.ptsg; + + writel(index, &ptsg->protocol_engine[index]); + } + + /* Record the smaller of the two capacity values */ + scic->logical_port_entries = + min(max_supported_ports, scic->logical_port_entries); + + scic->task_context_entries = + min(max_supported_io_requests, + scic->task_context_entries); + + scic->remote_node_entries = + min(max_supported_devices, scic->remote_node_entries); + + /* + * Now that we have the correct hardware reported minimum values + * build the MDL for the controller. Default to a performance + * configuration. + */ + scic_controller_set_mode(scic, SCI_MODE_SPEED); + } + + /* Initialize hardware PCI Relaxed ordering in DMA engines */ + if (result == SCI_SUCCESS) { + u32 dma_configuration; + + /* Configure the payload DMA */ + dma_configuration = + readl(&scic->scu_registers->sdma.pdma_configuration); + dma_configuration |= + SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(dma_configuration, + &scic->scu_registers->sdma.pdma_configuration); + + /* Configure the control DMA */ + dma_configuration = + readl(&scic->scu_registers->sdma.cdma_configuration); + dma_configuration |= + SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(dma_configuration, + &scic->scu_registers->sdma.cdma_configuration); + } + + /* + * Initialize the PHYs before the PORTs because the PHY registers + * are accessed during the port initialization. + */ + if (result == SCI_SUCCESS) { + /* Initialize the phys */ + for (index = 0; + (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS); + index++) { + result = scic_sds_phy_initialize( + &ihost->phys[index].sci, + &scic->scu_registers->peg0.pe[index].tl, + &scic->scu_registers->peg0.pe[index].ll); + } + } + + if (result == SCI_SUCCESS) { + /* Initialize the logical ports */ + for (index = 0; + (index < scic->logical_port_entries) && + (result == SCI_SUCCESS); + index++) { + result = scic_sds_port_initialize( + &ihost->ports[index].sci, + &scic->scu_registers->peg0.ptsg.port[index], + &scic->scu_registers->peg0.ptsg.protocol_engine, + &scic->scu_registers->peg0.viit[index]); + } + } + + if (result == SCI_SUCCESS) + result = scic_sds_port_configuration_agent_initialize( + scic, + &scic->port_agent); + + /* Advance the controller state machine */ + if (result == SCI_SUCCESS) + state = SCI_BASE_CONTROLLER_STATE_INITIALIZED; + else + state = SCI_BASE_CONTROLLER_STATE_FAILED; + sci_base_state_machine_change_state(sm, state); + + return result; +} + +static enum sci_status scic_user_parameters_set( + struct scic_sds_controller *scic, + union scic_user_parameters *scic_parms) +{ + u32 state = scic->state_machine.current_state_id; + + if (state == SCI_BASE_CONTROLLER_STATE_RESET || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || + state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + u16 index; + + /* + * Validate the user parameters. If they are not legal, then + * return a failure. + */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct sci_phy_user_params *user_phy; + + user_phy = &scic_parms->sds1.phys[index]; + + if (!((user_phy->max_speed_generation <= + SCIC_SDS_PARM_MAX_SPEED) && + (user_phy->max_speed_generation > + SCIC_SDS_PARM_NO_SPEED))) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if (user_phy->in_connection_align_insertion_frequency < + 3) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if ((user_phy->in_connection_align_insertion_frequency < + 3) || + (user_phy->align_insertion_frequency == 0) || + (user_phy-> + notify_enable_spin_up_insertion_frequency == + 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + if ((scic_parms->sds1.stp_inactivity_timeout == 0) || + (scic_parms->sds1.ssp_inactivity_timeout == 0) || + (scic_parms->sds1.stp_max_occupancy_timeout == 0) || + (scic_parms->sds1.ssp_max_occupancy_timeout == 0) || + (scic_parms->sds1.no_outbound_task_timeout == 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms)); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +static int scic_controller_mem_init(struct scic_sds_controller *scic) +{ + struct device *dev = scic_to_dev(scic); + dma_addr_t dma_handle; + enum sci_status result; + + scic->completion_queue = dmam_alloc_coherent(dev, + scic->completion_queue_entries * sizeof(u32), + &dma_handle, GFP_KERNEL); + if (!scic->completion_queue) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->completion_queue_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->completion_queue_upper); + + scic->remote_node_context_table = dmam_alloc_coherent(dev, + scic->remote_node_entries * + sizeof(union scu_remote_node_context), + &dma_handle, GFP_KERNEL); + if (!scic->remote_node_context_table) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->remote_node_context_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->remote_node_context_upper); + + scic->task_context_table = dmam_alloc_coherent(dev, + scic->task_context_entries * + sizeof(struct scu_task_context), + &dma_handle, GFP_KERNEL); + if (!scic->task_context_table) + return -ENOMEM; + + writel(lower_32_bits(dma_handle), + &scic->smu_registers->host_task_table_lower); + writel(upper_32_bits(dma_handle), + &scic->smu_registers->host_task_table_upper); + + result = scic_sds_unsolicited_frame_control_construct(scic); + if (result) + return result; + + /* + * Inform the silicon as to the location of the UF headers and + * address table. + */ + writel(lower_32_bits(scic->uf_control.headers.physical_address), + &scic->scu_registers->sdma.uf_header_base_address_lower); + writel(upper_32_bits(scic->uf_control.headers.physical_address), + &scic->scu_registers->sdma.uf_header_base_address_upper); + + writel(lower_32_bits(scic->uf_control.address_table.physical_address), + &scic->scu_registers->sdma.uf_address_table_lower); + writel(upper_32_bits(scic->uf_control.address_table.physical_address), + &scic->scu_registers->sdma.uf_address_table_upper); + + return 0; +} + int isci_host_init(struct isci_host *isci_host) { int err = 0, i; @@ -453,3 +2600,625 @@ int isci_host_init(struct isci_host *isci_host) return 0; } + +void scic_sds_controller_link_up(struct scic_sds_controller *scic, + struct scic_sds_port *port, struct scic_sds_phy *phy) +{ + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STARTING: + scic_sds_controller_phy_timer_stop(scic); + scic->port_agent.link_up_handler(scic, &scic->port_agent, + port, phy); + scic_sds_controller_start_next_phy(scic); + break; + case SCI_BASE_CONTROLLER_STATE_READY: + scic->port_agent.link_up_handler(scic, &scic->port_agent, + port, phy); + break; + default: + dev_dbg(scic_to_dev(scic), + "%s: SCIC Controller linkup event from phy %d in " + "unexpected state %d\n", __func__, phy->phy_index, + scic->state_machine.current_state_id); + } +} + +void scic_sds_controller_link_down(struct scic_sds_controller *scic, + struct scic_sds_port *port, struct scic_sds_phy *phy) +{ + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STARTING: + case SCI_BASE_CONTROLLER_STATE_READY: + scic->port_agent.link_down_handler(scic, &scic->port_agent, + port, phy); + break; + default: + dev_dbg(scic_to_dev(scic), + "%s: SCIC Controller linkdown event from phy %d in " + "unexpected state %d\n", + __func__, + phy->phy_index, + scic->state_machine.current_state_id); + } +} + +/** + * This is a helper method to determine if any remote devices on this + * controller are still in the stopping state. + * + */ +static bool scic_sds_controller_has_remote_devices_stopping( + struct scic_sds_controller *controller) +{ + u32 index; + + for (index = 0; index < controller->remote_node_entries; index++) { + if ((controller->device_table[index] != NULL) && + (controller->device_table[index]->state_machine.current_state_id + == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)) + return true; + } + + return false; +} + +/** + * This method is called by the remote device to inform the controller + * object that the remote device has stopped. + */ +void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev) +{ + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_STOPPING) { + dev_dbg(scic_to_dev(scic), + "SCIC Controller 0x%p remote device stopped event " + "from device 0x%p in unexpected state %d\n", + scic, sci_dev, + scic->state_machine.current_state_id); + return; + } + + if (!scic_sds_controller_has_remote_devices_stopping(scic)) { + sci_base_state_machine_change_state(&scic->state_machine, + SCI_BASE_CONTROLLER_STATE_STOPPED); + } +} + +/** + * This method will write to the SCU PCP register the request value. The method + * is used to suspend/resume ports, devices, and phys. + * @scic: + * + * + */ +void scic_sds_controller_post_request( + struct scic_sds_controller *scic, + u32 request) +{ + dev_dbg(scic_to_dev(scic), + "%s: SCIC Controller 0x%p post request 0x%08x\n", + __func__, + scic, + request); + + writel(request, &scic->smu_registers->post_context_port); +} + +/** + * This method will copy the soft copy of the task context into the physical + * memory accessible by the controller. + * @scic: This parameter specifies the controller for which to copy + * the task context. + * @sci_req: This parameter specifies the request for which the task + * context is being copied. + * + * After this call is made the SCIC_SDS_IO_REQUEST object will always point to + * the physical memory version of the task context. Thus, all subsequent + * updates to the task context are performed in the TC table (i.e. DMAable + * memory). none + */ +void scic_sds_controller_copy_task_context( + struct scic_sds_controller *scic, + struct scic_sds_request *sci_req) +{ + struct scu_task_context *task_context_buffer; + + task_context_buffer = scic_sds_controller_get_task_context_buffer( + scic, sci_req->io_tag); + + memcpy(task_context_buffer, + sci_req->task_context_buffer, + offsetof(struct scu_task_context, sgl_snapshot_ac)); + + /* + * Now that the soft copy of the TC has been copied into the TC + * table accessible by the silicon. Thus, any further changes to + * the TC (e.g. TC termination) occur in the appropriate location. */ + sci_req->task_context_buffer = task_context_buffer; +} + +/** + * This method returns the task context buffer for the given io tag. + * @scic: + * @io_tag: + * + * struct scu_task_context* + */ +struct scu_task_context *scic_sds_controller_get_task_context_buffer( + struct scic_sds_controller *scic, + u16 io_tag + ) { + u16 task_index = scic_sds_io_tag_get_index(io_tag); + + if (task_index < scic->task_context_entries) { + return &scic->task_context_table[task_index]; + } + + return NULL; +} + +struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, + u16 io_tag) +{ + u16 task_index; + u16 task_sequence; + + task_index = scic_sds_io_tag_get_index(io_tag); + + if (task_index < scic->task_context_entries) { + if (scic->io_request_table[task_index] != NULL) { + task_sequence = scic_sds_io_tag_get_sequence(io_tag); + + if (task_sequence == scic->io_request_sequence[task_index]) { + return scic->io_request_table[task_index]; + } + } + } + + return NULL; +} + +/** + * This method allocates remote node index and the reserves the remote node + * context space for use. This method can fail if there are no more remote + * node index available. + * @scic: This is the controller object which contains the set of + * free remote node ids + * @sci_dev: This is the device object which is requesting the a remote node + * id + * @node_id: This is the remote node id that is assinged to the device if one + * is available + * + * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote + * node index available. + */ +enum sci_status scic_sds_controller_allocate_remote_node_context( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 *node_id) +{ + u16 node_index; + u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); + + node_index = scic_sds_remote_node_table_allocate_remote_node( + &scic->available_remote_nodes, remote_node_count + ); + + if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + scic->device_table[node_index] = sci_dev; + + *node_id = node_index; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INSUFFICIENT_RESOURCES; +} + +/** + * This method frees the remote node index back to the available pool. Once + * this is done the remote node context buffer is no longer valid and can + * not be used. + * @scic: + * @sci_dev: + * @node_id: + * + */ +void scic_sds_controller_free_remote_node_context( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 node_id) +{ + u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); + + if (scic->device_table[node_id] == sci_dev) { + scic->device_table[node_id] = NULL; + + scic_sds_remote_node_table_release_remote_node_index( + &scic->available_remote_nodes, remote_node_count, node_id + ); + } +} + +/** + * This method returns the union scu_remote_node_context for the specified remote + * node id. + * @scic: + * @node_id: + * + * union scu_remote_node_context* + */ +union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( + struct scic_sds_controller *scic, + u16 node_id + ) { + if ( + (node_id < scic->remote_node_entries) + && (scic->device_table[node_id] != NULL) + ) { + return &scic->remote_node_context_table[node_id]; + } + + return NULL; +} + +/** + * + * @resposne_buffer: This is the buffer into which the D2H register FIS will be + * constructed. + * @frame_header: This is the frame header returned by the hardware. + * @frame_buffer: This is the frame buffer returned by the hardware. + * + * This method will combind the frame header and frame buffer to create a SATA + * D2H register FIS none + */ +void scic_sds_controller_copy_sata_response( + void *response_buffer, + void *frame_header, + void *frame_buffer) +{ + memcpy(response_buffer, frame_header, sizeof(u32)); + + memcpy(response_buffer + sizeof(u32), + frame_buffer, + sizeof(struct dev_to_host_fis) - sizeof(u32)); +} + +/** + * This method releases the frame once this is done the frame is available for + * re-use by the hardware. The data contained in the frame header and frame + * buffer is no longer valid. The UF queue get pointer is only updated if UF + * control indicates this is appropriate. + * @scic: + * @frame_index: + * + */ +void scic_sds_controller_release_frame( + struct scic_sds_controller *scic, + u32 frame_index) +{ + if (scic_sds_unsolicited_frame_control_release_frame( + &scic->uf_control, frame_index) == true) + writel(scic->uf_control.get, + &scic->scu_registers->sdma.unsolicited_frame_get_pointer); +} + +/** + * scic_controller_start_io() - This method is called by the SCI user to + * send/start an IO request. If the method invocation is successful, then + * the IO request has been queued to the hardware for processing. + * @controller: the handle to the controller object for which to start an IO + * request. + * @remote_device: the handle to the remote device object for which to start an + * IO request. + * @io_request: the handle to the io request object to start. + * @io_tag: This parameter specifies a previously allocated IO tag that the + * user desires to be utilized for this request. This parameter is optional. + * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value + * for this parameter. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a + * result, it is expected the user will have set the NCQ tag field in the host + * to device register FIS prior to calling this method. There is also a + * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking + * the scic_controller_start_io() method. scic_controller_allocate_tag() for + * more information on allocating a tag. Indicate if the controller + * successfully started the IO request. SCI_SUCCESS if the IO request was + * successfully started. Determine the failure situations and return values. + */ +enum sci_status scic_controller_start_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req, + u16 io_tag) +{ + enum sci_status status; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), "invalid state to start I/O"); + return SCI_FAILURE_INVALID_STATE; + } + + status = scic_sds_remote_device_start_io(scic, rdev, req); + if (status != SCI_SUCCESS) + return status; + + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); + return SCI_SUCCESS; +} + +/** + * scic_controller_terminate_request() - This method is called by the SCI Core + * user to terminate an ongoing (i.e. started) core IO request. This does + * not abort the IO request at the target, but rather removes the IO request + * from the host controller. + * @controller: the handle to the controller object for which to terminate a + * request. + * @remote_device: the handle to the remote device object for which to + * terminate a request. + * @request: the handle to the io or task management request object to + * terminate. + * + * Indicate if the controller successfully began the terminate process for the + * IO request. SCI_SUCCESS if the terminate process was successfully started + * for the request. Determine the failure situations and return values. + */ +enum sci_status scic_controller_terminate_request( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req) +{ + enum sci_status status; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), + "invalid state to terminate request\n"); + return SCI_FAILURE_INVALID_STATE; + } + + status = scic_sds_io_request_terminate(req); + if (status != SCI_SUCCESS) + return status; + + /* + * Utilize the original post context command and or in the POST_TC_ABORT + * request sub-type. + */ + scic_sds_controller_post_request(scic, + scic_sds_request_get_post_context(req) | + SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); + return SCI_SUCCESS; +} + +/** + * scic_controller_complete_io() - This method will perform core specific + * completion operations for an IO request. After this method is invoked, + * the user should consider the IO request as invalid until it is properly + * reused (i.e. re-constructed). + * @controller: The handle to the controller object for which to complete the + * IO request. + * @remote_device: The handle to the remote device object for which to complete + * the IO request. + * @io_request: the handle to the io request object to complete. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI + * Core user, using the scic_controller_allocate_io_tag() method, then it is + * the responsibility of the caller to invoke the scic_controller_free_io_tag() + * method to free the tag (i.e. this method will not free the IO tag). Indicate + * if the controller successfully completed the IO request. SCI_SUCCESS if the + * completion process was successful. + */ +enum sci_status scic_controller_complete_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *request) +{ + enum sci_status status; + u16 index; + + switch (scic->state_machine.current_state_id) { + case SCI_BASE_CONTROLLER_STATE_STOPPING: + /* XXX: Implement this function */ + return SCI_FAILURE; + case SCI_BASE_CONTROLLER_STATE_READY: + status = scic_sds_remote_device_complete_io(scic, rdev, request); + if (status != SCI_SUCCESS) + return status; + + index = scic_sds_io_tag_get_index(request->io_tag); + scic->io_request_table[index] = NULL; + return SCI_SUCCESS; + default: + dev_warn(scic_to_dev(scic), "invalid state to complete I/O"); + return SCI_FAILURE_INVALID_STATE; + } + +} + +enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), "invalid state to continue I/O"); + return SCI_FAILURE_INVALID_STATE; + } + + scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req; + scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req)); + return SCI_SUCCESS; +} + +/** + * scic_controller_start_task() - This method is called by the SCIC user to + * send/start a framework task management request. + * @controller: the handle to the controller object for which to start the task + * management request. + * @remote_device: the handle to the remote device object for which to start + * the task management request. + * @task_request: the handle to the task request object to start. + * @io_tag: This parameter specifies a previously allocated IO tag that the + * user desires to be utilized for this request. Note this not the io_tag + * of the request being managed. It is to be utilized for the task request + * itself. This parameter is optional. The user is allowed to supply + * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - The user must synchronize this task with completion + * queue processing. If they are not synchronized then it is possible for the + * io requests that are being managed by the task request can complete before + * starting the task request. scic_controller_allocate_tag() for more + * information on allocating a tag. Indicate if the controller successfully + * started the IO request. SCI_TASK_SUCCESS if the task request was + * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is + * returned if there is/are task(s) outstanding that require termination or + * completion before this request can succeed. + */ +enum sci_task_status scic_controller_start_task( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req, + u16 task_tag) +{ + enum sci_status status; + + if (scic->state_machine.current_state_id != + SCI_BASE_CONTROLLER_STATE_READY) { + dev_warn(scic_to_dev(scic), + "%s: SCIC Controller starting task from invalid " + "state\n", + __func__); + return SCI_TASK_FAILURE_INVALID_STATE; + } + + status = scic_sds_remote_device_start_task(scic, rdev, req); + switch (status) { + case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + + /* + * We will let framework know this task request started successfully, + * although core is still woring on starting the request (to post tc when + * RNC is resumed.) + */ + return SCI_SUCCESS; + case SCI_SUCCESS: + scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + + scic_sds_controller_post_request(scic, + scic_sds_request_get_post_context(req)); + break; + default: + break; + } + + return status; +} + +/** + * scic_controller_allocate_io_tag() - This method will allocate a tag from the + * pool of free IO tags. Direct allocation of IO tags by the SCI Core user + * is optional. The scic_controller_start_io() method will allocate an IO + * tag if this method is not utilized and the tag is not supplied to the IO + * construct routine. Direct allocation of IO tags may provide additional + * performance improvements in environments capable of supporting this usage + * model. Additionally, direct allocation of IO tags also provides + * additional flexibility to the SCI Core user. Specifically, the user may + * retain IO tags across the lives of multiple IO requests. + * @controller: the handle to the controller object for which to allocate the + * tag. + * + * IO tags are a protected resource. It is incumbent upon the SCI Core user to + * ensure that each of the methods that may allocate or free available IO tags + * are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). An unsigned integer representing an available IO tag. + * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no + * currently available tags to be allocated. All return other values indicate a + * legitimate tag. + */ +u16 scic_controller_allocate_io_tag( + struct scic_sds_controller *scic) +{ + u16 task_context; + u16 sequence_count; + + if (!sci_pool_empty(scic->tci_pool)) { + sci_pool_get(scic->tci_pool, task_context); + + sequence_count = scic->io_request_sequence[task_context]; + + return scic_sds_io_tag_construct(sequence_count, task_context); + } + + return SCI_CONTROLLER_INVALID_IO_TAG; +} + +/** + * scic_controller_free_io_tag() - This method will free an IO tag to the pool + * of free IO tags. This method provides the SCI Core user more flexibility + * with regards to IO tags. The user may desire to keep an IO tag after an + * IO request has completed, because they plan on re-using the tag for a + * subsequent IO request. This method is only legal if the tag was + * allocated via scic_controller_allocate_io_tag(). + * @controller: This parameter specifies the handle to the controller object + * for which to free/return the tag. + * @io_tag: This parameter represents the tag to be freed to the pool of + * available tags. + * + * - IO tags are a protected resource. It is incumbent upon the SCI Core user + * to ensure that each of the methods that may allocate or free available IO + * tags are handled in a mutually exclusive manner. This method is one of said + * methods requiring proper critical code section protection (e.g. semaphore, + * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI + * Core user, using the scic_controller_allocate_io_tag() method, then it is + * the responsibility of the caller to invoke this method to free the tag. This + * method returns an indication of whether the tag was successfully put back + * (freed) to the pool of available tags. SCI_SUCCESS This return value + * indicates the tag was successfully placed into the pool of available IO + * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag + * is not a valid IO tag value. + */ +enum sci_status scic_controller_free_io_tag( + struct scic_sds_controller *scic, + u16 io_tag) +{ + u16 sequence; + u16 index; + + BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG); + + sequence = scic_sds_io_tag_get_sequence(io_tag); + index = scic_sds_io_tag_get_index(io_tag); + + if (!sci_pool_full(scic->tci_pool)) { + if (sequence == scic->io_request_sequence[index]) { + scic_sds_io_sequence_increment( + scic->io_request_sequence[index]); + + sci_pool_put(scic->tci_pool, index); + + return SCI_SUCCESS; + } + } + + return SCI_FAILURE_INVALID_IO_TAG; +} + + diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 13c1c99..1f542c4 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -52,13 +52,258 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - #ifndef _SCI_HOST_H_ #define _SCI_HOST_H_ -#include "scic_sds_controller.h" +#include "scic_config_parameters.h" #include "remote_device.h" #include "phy.h" +#include "pool.h" +#include "sci_base_state_machine.h" +#include "remote_node_table.h" +#include "scu_registers.h" +#include "scu_unsolicited_frame.h" +#include "scic_sds_unsolicited_frame_control.h" +#include "scic_sds_port_configuration_agent.h" + +struct scic_sds_request; +struct scu_task_context; + +/** + * struct scic_power_control - + * + * This structure defines the fields for managing power control for direct + * attached disk devices. + */ +struct scic_power_control { + /** + * This field is set when the power control timer is running and cleared when + * it is not. + */ + bool timer_started; + + /** + * This field is the handle to the driver timer object. This timer is used to + * control when the directed attached disks can consume power. + */ + void *timer; + + /** + * This field is used to keep track of how many phys are put into the + * requesters field. + */ + u8 phys_waiting; + + /** + * This field is used to keep track of how many phys have been granted to consume power + */ + u8 phys_granted_power; + + /** + * This field is an array of phys that we are waiting on. The phys are direct + * mapped into requesters via struct scic_sds_phy.phy_index + */ + struct scic_sds_phy *requesters[SCI_MAX_PHYS]; + +}; + +/** + * struct scic_sds_controller - + * + * This structure represents the SCU controller object. + */ +struct scic_sds_controller { + /** + * This field contains the information for the base controller state + * machine. + */ + struct sci_base_state_machine state_machine; + + /** + * This field is the driver timer object handler used to time the controller + * object start and stop requests. + */ + void *timeout_timer; + + /** + * This field contains the user parameters to be utilized for this + * core controller object. + */ + union scic_user_parameters user_parameters; + + /** + * This field contains the OEM parameters to be utilized for this + * core controller object. + */ + union scic_oem_parameters oem_parameters; + + /** + * This field contains the port configuration agent for this controller. + */ + struct scic_sds_port_configuration_agent port_agent; + + /** + * This field is the array of device objects that are currently constructed + * for this controller object. This table is used as a fast lookup of device + * objects that need to handle device completion notifications from the + * hardware. The table is RNi based. + */ + struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; + + /** + * This field is the array of IO request objects that are currently active for + * this controller object. This table is used as a fast lookup of the io + * request object that need to handle completion queue notifications. The + * table is TCi based. + */ + struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS]; + + /** + * This field is the free RNi data structure + */ + struct scic_remote_node_table available_remote_nodes; + + /** + * This field is the TCi pool used to manage the task context index. + */ + SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS); + + /** + * This filed is the struct scic_power_control data used to controll when direct + * attached devices can consume power. + */ + struct scic_power_control power_control; + + /** + * This field is the array of sequence values for the IO Tag fields. Even + * though only 4 bits of the field is used for the sequence the sequence is 16 + * bits in size so the sequence can be bitwise or'd with the TCi to build the + * IO Tag value. + */ + u16 io_request_sequence[SCI_MAX_IO_REQUESTS]; + + /** + * This field in the array of sequence values for the RNi. These are used + * to control io request build to io request start operations. The sequence + * value is recorded into an io request when it is built and is checked on + * the io request start operation to make sure that there was not a device + * hot plug between the build and start operation. + */ + u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES]; + + /** + * This field is a pointer to the memory allocated by the driver for the task + * context table. This data is shared between the hardware and software. + */ + struct scu_task_context *task_context_table; + + /** + * This field is a pointer to the memory allocated by the driver for the + * remote node context table. This table is shared between the hardware and + * software. + */ + union scu_remote_node_context *remote_node_context_table; + + /** + * This field is a pointer to the completion queue. This memory is + * written to by the hardware and read by the software. + */ + u32 *completion_queue; + + /** + * This field is the software copy of the completion queue get pointer. The + * controller object writes this value to the hardware after processing the + * completion entries. + */ + u32 completion_queue_get; + + /** + * This field is the minimum of the number of hardware supported port entries + * and the software requested port entries. + */ + u32 logical_port_entries; + + /** + * This field is the minimum number of hardware supported completion queue + * entries and the software requested completion queue entries. + */ + u32 completion_queue_entries; + + /** + * This field is the minimum number of hardware supported event entries and + * the software requested event entries. + */ + u32 completion_event_entries; + + /** + * This field is the minimum number of devices supported by the hardware and + * the number of devices requested by the software. + */ + u32 remote_node_entries; + + /** + * This field is the minimum number of IO requests supported by the hardware + * and the number of IO requests requested by the software. + */ + u32 task_context_entries; + + /** + * This object contains all of the unsolicited frame specific + * data utilized by the core controller. + */ + struct scic_sds_unsolicited_frame_control uf_control; + + /* Phy Startup Data */ + /** + * This field is the driver timer handle for controller phy request startup. + * On controller start the controller will start each PHY individually in + * order of phy index. + */ + void *phy_startup_timer; + + /** + * This field is set when the phy_startup_timer is running and is cleared when + * the phy_startup_timer is stopped. + */ + bool phy_startup_timer_pending; + + /** + * This field is the index of the next phy start. It is initialized to 0 and + * increments for each phy index that is started. + */ + u32 next_phy_to_start; + + /** + * This field controlls the invalid link up notifications to the SCI_USER. If + * an invalid_link_up notification is reported a bit for the PHY index is set + * so further notifications are not made. Once the PHY object reports link up + * and is made part of a port then this bit for the PHY index is cleared. + */ + u8 invalid_phy_mask; + + /* + * This field saves the current interrupt coalescing number of the controller. + */ + u16 interrupt_coalesce_number; + + /* + * This field saves the current interrupt coalescing timeout value in microseconds. + */ + u32 interrupt_coalesce_timeout; + + /** + * This field is a pointer to the memory mapped register space for the + * struct smu_registers. + */ + struct smu_registers __iomem *smu_registers; + + /** + * This field is a pointer to the memory mapped register space for the + * struct scu_registers. + */ + struct scu_registers __iomem *scu_registers; + +}; struct isci_host { struct scic_sds_controller sci; @@ -93,6 +338,96 @@ struct isci_host { }; /** + * enum scic_sds_controller_states - This enumeration depicts all the states + * for the common controller state machine. + */ +enum scic_sds_controller_states { + /** + * Simply the initial state for the base controller state machine. + */ + SCI_BASE_CONTROLLER_STATE_INITIAL = 0, + + /** + * This state indicates that the controller is reset. The memory for + * the controller is in it's initial state, but the controller requires + * initialization. + * This state is entered from the INITIAL state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_CONTROLLER_STATE_RESET, + + /** + * This state is typically an action state that indicates the controller + * is in the process of initialization. In this state no new IO operations + * are permitted. + * This state is entered from the RESET state. + */ + SCI_BASE_CONTROLLER_STATE_INITIALIZING, + + /** + * This state indicates that the controller has been successfully + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + */ + SCI_BASE_CONTROLLER_STATE_INITIALIZED, + + /** + * This state indicates the the controller is in the process of becoming + * ready (i.e. starting). In this state no new IO operations are permitted. + * This state is entered from the INITIALIZED state. + */ + SCI_BASE_CONTROLLER_STATE_STARTING, + + /** + * This state indicates the controller is now ready. Thus, the user + * is able to perform IO operations on the controller. + * This state is entered from the STARTING state. + */ + SCI_BASE_CONTROLLER_STATE_READY, + + /** + * This state is typically an action state that indicates the controller + * is in the process of resetting. Thus, the user is unable to perform + * IO operations on the controller. A reset is considered destructive in + * most cases. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + * This state is entered from the STOPPED state. + */ + SCI_BASE_CONTROLLER_STATE_RESETTING, + + /** + * This state indicates that the controller is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_BASE_CONTROLLER_STATE_STOPPING, + + /** + * This state indicates that the controller has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_BASE_CONTROLLER_STATE_STOPPED, + + /** + * This state indicates that the controller could not successfully be + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the STARTING state. + * This state is entered from the STOPPING state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_CONTROLLER_STATE_FAILED, + + SCI_BASE_CONTROLLER_MAX_STATES + +}; + + + +/** * struct isci_pci_info - This class represents the pci function containing the * controllers. Depending on PCI SKU, there could be up to 2 controllers in * the PCI function. @@ -115,17 +450,13 @@ static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \ ihost = to_pci_info(pdev)->hosts[++id]) -static inline -enum isci_status isci_host_get_state( - struct isci_host *isci_host) +static inline enum isci_status isci_host_get_state(struct isci_host *isci_host) { return isci_host->status; } - -static inline void isci_host_change_state( - struct isci_host *isci_host, - enum isci_status status) +static inline void isci_host_change_state(struct isci_host *isci_host, + enum isci_status status) { unsigned long flags; @@ -140,9 +471,7 @@ static inline void isci_host_change_state( } -static inline int isci_host_can_queue( - struct isci_host *isci_host, - int num) +static inline int isci_host_can_queue(struct isci_host *isci_host, int num) { int ret = 0; unsigned long flags; @@ -163,9 +492,7 @@ static inline int isci_host_can_queue( return ret; } -static inline void isci_host_can_dequeue( - struct isci_host *isci_host, - int num) +static inline void isci_host_can_dequeue(struct isci_host *isci_host, int num) { unsigned long flags; @@ -208,39 +535,219 @@ static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic) } /** - * isci_host_scan_finished() - + * INCREMENT_QUEUE_GET() - * - * This function is one of the SCSI Host Template functions. The SCSI midlayer - * calls this function during a target scan, approx. once every 10 millisecs. + * This macro will increment the specified index to and if the index wraps to 0 + * it will toggel the cycle bit. */ -int isci_host_scan_finished( - struct Scsi_Host *, - unsigned long); +#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \ + { \ + if ((index) + 1 == entry_count) { \ + (index) = 0; \ + (cycle) = (cycle) ^ (bit_toggle); \ + } else { \ + index = index + 1; \ + } \ + } +/** + * scic_sds_controller_get_port_configuration_agent() - + * + * This is a helper macro to get the port configuration agent from the + * controller object. + */ +#define scic_sds_controller_get_port_configuration_agent(controller) \ + (&(controller)->port_agent) /** - * isci_host_scan_start() - + * scic_sds_controller_get_protocol_engine_group() - * - * This function is one of the SCSI Host Template function, called by the SCSI - * mid layer berfore a target scan begins. The core library controller start - * routine is called from here. + * This macro returns the protocol engine group for this controller object. + * Presently we only support protocol engine group 0 so just return that */ -void isci_host_scan_start( - struct Scsi_Host *); +#define scic_sds_controller_get_protocol_engine_group(controller) 0 /** - * isci_host_start_complete() - + * scic_sds_io_tag_construct() - * - * This function is called by the core library, through the ISCI Module, to - * indicate controller start status. + * This macro constructs an IO tag from the sequence and index values. */ -void isci_host_start_complete( - struct isci_host *, - enum sci_status); +#define scic_sds_io_tag_construct(sequence, task_index) \ + ((sequence) << 12 | (task_index)) -void isci_host_stop_complete( - struct isci_host *isci_host, - enum sci_status completion_status); +/** + * scic_sds_io_tag_get_sequence() - + * + * This macro returns the IO sequence from the IO tag value. + */ +#define scic_sds_io_tag_get_sequence(io_tag) \ + (((io_tag) & 0xF000) >> 12) + +/** + * scic_sds_io_tag_get_index() - + * + * This macro returns the TCi from the io tag value + */ +#define scic_sds_io_tag_get_index(io_tag) \ + ((io_tag) & 0x0FFF) + +/** + * scic_sds_io_sequence_increment() - + * + * This is a helper macro to increment the io sequence count. We may find in + * the future that it will be faster to store the sequence count in such a way + * as we dont perform the shift operation to build io tag values so therefore + * need a way to incrment them correctly + */ +#define scic_sds_io_sequence_increment(value) \ + ((value) = (((value) + 1) & 0x000F)) + +/* expander attached sata devices require 3 rnc slots */ +static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev) +{ + struct domain_device *dev = sci_dev_to_domain(sci_dev); + + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + !sci_dev->is_direct_attached) + return SCU_STP_REMOTE_NODE_COUNT; + return SCU_SSP_REMOTE_NODE_COUNT; +} + +/** + * scic_sds_controller_set_invalid_phy() - + * + * This macro will set the bit in the invalid phy mask for this controller + * object. This is used to control messages reported for invalid link up + * notifications. + */ +#define scic_sds_controller_set_invalid_phy(controller, phy) \ + ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index)) + +/** + * scic_sds_controller_clear_invalid_phy() - + * + * This macro will clear the bit in the invalid phy mask for this controller + * object. This is used to control messages reported for invalid link up + * notifications. + */ +#define scic_sds_controller_clear_invalid_phy(controller, phy) \ + ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) + +static inline struct device *scic_to_dev(struct scic_sds_controller *scic) +{ + return &scic_to_ihost(scic)->pdev->dev; +} + +static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) +{ + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) + return NULL; + + return &iphy->isci_port->isci_host->pdev->dev; +} + +static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) +{ + struct isci_port *iport = sci_port_to_iport(sci_port); + + if (!iport || !iport->isci_host) + return NULL; + + return &iport->isci_host->pdev->dev; +} + +static inline struct device *scirdev_to_dev(struct scic_sds_remote_device *sci_dev) +{ + struct isci_remote_device *idev = + container_of(sci_dev, typeof(*idev), sci); + + if (!idev || !idev->isci_port || !idev->isci_port->isci_host) + return NULL; + + return &idev->isci_port->isci_host->pdev->dev; +} + +enum { + ISCI_SI_REVA0, + ISCI_SI_REVA2, + ISCI_SI_REVB0, +}; + +extern int isci_si_rev; + +static inline bool is_a0(void) +{ + return isci_si_rev == ISCI_SI_REVA0; +} + +static inline bool is_a2(void) +{ + return isci_si_rev == ISCI_SI_REVA2; +} + +static inline bool is_b0(void) +{ + return isci_si_rev > ISCI_SI_REVA2; +} + +void scic_sds_controller_post_request(struct scic_sds_controller *scic, + u32 request); +void scic_sds_controller_release_frame(struct scic_sds_controller *scic, + u32 frame_index); +void scic_sds_controller_copy_sata_response(void *response_buffer, + void *frame_header, + void *frame_buffer); +enum sci_status scic_sds_controller_allocate_remote_node_context(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 *node_id); +void scic_sds_controller_free_remote_node_context( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 node_id); +union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( + struct scic_sds_controller *scic, + u16 node_id); + +struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, + u16 io_tag); + +struct scu_task_context *scic_sds_controller_get_task_context_buffer( + struct scic_sds_controller *scic, + u16 io_tag); + +void scic_sds_controller_power_control_queue_insert( + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy); + +void scic_sds_controller_power_control_queue_remove( + struct scic_sds_controller *scic, + struct scic_sds_phy *sci_phy); + +void scic_sds_controller_link_up( + struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +void scic_sds_controller_link_down( + struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +void scic_sds_controller_remote_device_stopped( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev); + +void scic_sds_controller_copy_task_context( + struct scic_sds_controller *scic, + struct scic_sds_request *this_request); + +void scic_sds_controller_register_setup(struct scic_sds_controller *scic); + +enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req); +int isci_host_scan_finished(struct Scsi_Host *, unsigned long); +void isci_host_scan_start(struct Scsi_Host *); int isci_host_init(struct isci_host *); @@ -262,4 +769,35 @@ void isci_host_remote_device_start_complete( struct isci_remote_device *, enum sci_status); -#endif /* !defined(_SCI_HOST_H_) */ +void scic_controller_disable_interrupts( + struct scic_sds_controller *scic); + +enum sci_status scic_controller_start_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request, + u16 io_tag); + +enum sci_task_status scic_controller_start_task( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *task_request, + u16 io_tag); + +enum sci_status scic_controller_terminate_request( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *request); + +enum sci_status scic_controller_complete_io( + struct scic_sds_controller *scic, + struct scic_sds_remote_device *remote_device, + struct scic_sds_request *io_request); + +u16 scic_controller_allocate_io_tag( + struct scic_sds_controller *scic); + +enum sci_status scic_controller_free_io_tag( + struct scic_sds_controller *scic, + u16 io_tag); +#endif diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index df132c0..bda7016 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -61,9 +61,7 @@ #include #include "isci.h" #include "task.h" -#include "sci_environment.h" #include "probe_roms.h" -#include "scic_controller.h" static struct scsi_transport_template *isci_transport_template; diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 800f233..d288897 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -532,10 +532,4 @@ extern unsigned char max_concurr_spinup; irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); irqreturn_t isci_error_isr(int vec, void *data); - -struct scic_sds_controller; -bool scic_sds_controller_isr(struct scic_sds_controller *scic); -void scic_sds_controller_completion_handler(struct scic_sds_controller *scic); -bool scic_sds_controller_error_isr(struct scic_sds_controller *scic); -void scic_sds_controller_error_handler(struct scic_sds_controller *scic); #endif /* __ISCI_H__ */ diff --git a/drivers/scsi/isci/pool.h b/drivers/scsi/isci/pool.h new file mode 100644 index 0000000..016ec83 --- /dev/null +++ b/drivers/scsi/isci/pool.h @@ -0,0 +1,199 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the interface to the pool class. This class allows two + * different two different priority tasks to insert and remove items from + * the free pool. The user of the pool is expected to evaluate the pool + * condition empty before a get operation and pool condition full before a + * put operation. Methods Provided: - sci_pool_create() - + * sci_pool_initialize() - sci_pool_empty() - sci_pool_full() - + * sci_pool_get() - sci_pool_put() + * + * + */ + +#ifndef _SCI_POOL_H_ +#define _SCI_POOL_H_ + +/** + * SCI_POOL_INCREMENT() - + * + * Private operation for the pool + */ +#define SCI_POOL_INCREMENT(pool, index) \ + (((index) + 1) == (pool).size ? 0 : (index) + 1) + +/** + * SCI_POOL_CREATE() - + * + * This creates a pool structure of pool_name. The members in the pool are of + * type with number of elements equal to size. + */ +#define SCI_POOL_CREATE(pool_name, type, pool_size) \ + struct \ + { \ + u32 size; \ + u32 get; \ + u32 put; \ + type array[(pool_size) + 1]; \ + } pool_name + + +/** + * sci_pool_empty() - + * + * This macro evaluates the pool and returns true if the pool is empty. If the + * pool is empty the user should not perform any get operation on the pool. + */ +#define sci_pool_empty(pool) \ + ((pool).get == (pool).put) + +/** + * sci_pool_full() - + * + * This macro evaluates the pool and returns true if the pool is full. If the + * pool is full the user should not perform any put operation. + */ +#define sci_pool_full(pool) \ + (SCI_POOL_INCREMENT(pool, (pool).put) == (pool).get) + +/** + * sci_pool_size() - + * + * This macro returns the size of the pool created. The internal size of the + * pool is actually 1 larger then necessary in order to ensure get and put + * pointers can be written simultaneously by different users. As a result, + * this macro subtracts 1 from the internal size + */ +#define sci_pool_size(pool) \ + ((pool).size - 1) + +/** + * sci_pool_count() - + * + * This macro indicates the number of elements currently contained in the pool. + */ +#define sci_pool_count(pool) \ + (\ + sci_pool_empty((pool)) \ + ? 0 \ + : (\ + sci_pool_full((pool)) \ + ? sci_pool_size((pool)) \ + : (\ + (pool).get > (pool).put \ + ? ((pool).size - (pool).get + (pool).put) \ + : ((pool).put - (pool).get) \ + ) \ + ) \ + ) + +/** + * sci_pool_initialize() - + * + * This macro initializes the pool to an empty condition. + */ +#define sci_pool_initialize(pool) \ + { \ + (pool).size = (sizeof((pool).array) / sizeof((pool).array[0])); \ + (pool).get = 0; \ + (pool).put = 0; \ + } + +/** + * sci_pool_get() - + * + * This macro will get the next free element from the pool. This should only be + * called if the pool is not empty. + */ +#define sci_pool_get(pool, my_value) \ + { \ + (my_value) = (pool).array[(pool).get]; \ + (pool).get = SCI_POOL_INCREMENT((pool), (pool).get); \ + } + +/** + * sci_pool_put() - + * + * This macro will put the value into the pool. This should only be called if + * the pool is not full. + */ +#define sci_pool_put(pool, value) \ + { \ + (pool).array[(pool).put] = (value); \ + (pool).put = SCI_POOL_INCREMENT((pool), (pool).put); \ + } + +/** + * sci_pool_erase() - + * + * This macro will search the pool and remove any elements in the pool matching + * the supplied value. This method can only be utilized on pools + */ +#define sci_pool_erase(pool, type, value) \ + { \ + type tmp_value; \ + u32 index; \ + u32 element_count = sci_pool_count((pool)); \ + \ + for (index = 0; index < element_count; index++) { \ + sci_pool_get((pool), tmp_value); \ + if (tmp_value != (value)) \ + sci_pool_put((pool), tmp_value); \ + } \ + } + +#endif /* _SCI_POOL_H_ */ diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 35e2e51..f44fa20 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -53,13 +53,6 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -/** - * This file contains the isci port implementation. - * - * - */ - - #include #include "isci.h" #include "scic_io_request.h" @@ -68,7 +61,6 @@ #include "scic_port.h" #include "port.h" #include "request.h" -#include "core/scic_sds_controller.h" static void isci_port_change_state(struct isci_port *iport, enum isci_status status) { diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 7055174..9bc173f 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -32,7 +32,6 @@ #include "isci.h" #include "task.h" -#include "sci_environment.h" #include "probe_roms.h" struct efi_variable { diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 8b1ef19..00334b9 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -57,16 +57,13 @@ #include "port.h" #include "remote_device.h" #include "request.h" -#include "scic_controller.h" #include "scic_io_request.h" #include "scic_phy.h" #include "scic_port.h" -#include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" #include "scic_sds_request.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" #include "task.h" diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 5e85a18..af47593 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -53,12 +53,11 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include "host.h" #include "sci_base_state_machine.h" -#include "scic_sds_controller.h" #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" -#include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c index 8886146..80f44c2 100644 --- a/drivers/scsi/isci/remote_node_table.c +++ b/drivers/scsi/isci/remote_node_table.c @@ -60,7 +60,6 @@ * */ #include "sci_util.h" -#include "sci_environment.h" #include "remote_node_table.h" #include "remote_node_context.h" diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index a580728..4961ee3 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -62,7 +62,6 @@ #include "sata.h" #include "scu_completion_codes.h" #include "scic_sds_request.h" -#include "scic_controller.h" #include "sas.h" static enum sci_status isci_request_ssp_request_construct( diff --git a/drivers/scsi/isci/sci_environment.h b/drivers/scsi/isci/sci_environment.h deleted file mode 100644 index 30addba..0000000 --- a/drivers/scsi/isci/sci_environment.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_ENVIRONMENT_H_ -#define _SCI_ENVIRONMENT_H_ - -#include "host.h" - - -static inline struct device *scic_to_dev(struct scic_sds_controller *scic) -{ - return &scic_to_ihost(scic)->pdev->dev; -} - -static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) -{ - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) - return NULL; - - return &iphy->isci_port->isci_host->pdev->dev; -} - -static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) -{ - struct isci_port *iport = sci_port_to_iport(sci_port); - - if (!iport || !iport->isci_host) - return NULL; - - return &iport->isci_host->pdev->dev; -} - -static inline struct device *scirdev_to_dev( - struct scic_sds_remote_device *sci_dev) -{ - struct isci_remote_device *idev = - container_of(sci_dev, typeof(*idev), sci); - - if (!idev || !idev->isci_port || !idev->isci_port->isci_host) - return NULL; - - return &idev->isci_port->isci_host->pdev->dev; -} - -enum { - ISCI_SI_REVA0, - ISCI_SI_REVA2, - ISCI_SI_REVB0, -}; - -extern int isci_si_rev; - -static inline bool is_a0(void) -{ - return isci_si_rev == ISCI_SI_REVA0; -} - -static inline bool is_a2(void) -{ - return isci_si_rev == ISCI_SI_REVA2; -} - -static inline bool is_b0(void) -{ - return isci_si_rev > ISCI_SI_REVA2; -} - -#endif diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 597c490..2a86038 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -65,7 +65,6 @@ #include "sata.h" #include "task.h" #include "scic_sds_request.h" -#include "scic_controller.h" #include "timers.h" /** -- cgit v0.10.2 From 63a3a15fb00ef49e50e98ff675094afcd92f113a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 May 2011 21:36:46 -0700 Subject: isci: uplevel register hardware data structures and unsolicited frame handling Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 45f8f68..0153b0f 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -5,6 +5,7 @@ isci-objs := init.o phy.o request.o sata.o \ host.o task.o probe_roms.o \ remote_node_context.o \ remote_node_table.o \ + unsolicited_frame_control.o \ core/scic_sds_request.o \ core/scic_sds_stp_request.o \ core/scic_sds_port.o \ @@ -12,6 +13,5 @@ isci-objs := init.o phy.o request.o sata.o \ core/scic_sds_phy.o \ core/scic_sds_ssp_request.o \ core/scic_sds_smp_request.o \ - core/scic_sds_unsolicited_frame_control.o \ core/sci_base_state_machine.o \ core/sci_util.o diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index c40c09b..472718d 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -58,7 +58,7 @@ #include "sas.h" #include "scic_phy.h" -#include "scu_registers.h" +#include "registers.h" #include "sci_base_state_machine.h" #include diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 652d823..652917e 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -61,7 +61,7 @@ #include "remote_device.h" #include "remote_node_context.h" #include "scic_sds_request.h" -#include "scu_registers.h" +#include "registers.h" #include "timers.h" #define SCIC_SDS_PORT_MIN_TIMER_COUNT (SCI_MAX_PORTS) diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index bd612d5..4b28c5a 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -59,7 +59,7 @@ #include #include "isci.h" #include "sas.h" -#include "scu_registers.h" +#include "registers.h" #include "sci_base_state_machine.h" struct scic_sds_controller; diff --git a/drivers/scsi/isci/core/scic_sds_port_registers.h b/drivers/scsi/isci/core/scic_sds_port_registers.h deleted file mode 100644 index 01e24e5..0000000 --- a/drivers/scsi/isci/core/scic_sds_port_registers.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PORT_REGISTERS_H_ -#define _SCIC_SDS_PORT_REGISTERS_H_ - -/** - * This file contains a set of macros that assist in reading the SCU hardware - * registers. - * - * - */ - -#endif /* _SCIC_SDS_PORT_REGISTERS_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 1405aa7..cd27960 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -55,13 +55,13 @@ #include #include "scic_io_request.h" -#include "scu_registers.h" +#include "registers.h" #include "scic_sds_port.h" #include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_smp_request.h" #include "scic_sds_stp_request.h" -#include "scic_sds_unsolicited_frame_control.h" +#include "unsolicited_frame_control.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 2f50951..9a787e2 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -62,7 +62,7 @@ #include "scic_sds_request.h" #include "scic_sds_stp_pio_request.h" #include "scic_sds_stp_request.h" -#include "scic_sds_unsolicited_frame_control.h" +#include "unsolicited_frame_control.h" #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c deleted file mode 100644 index d0e0373..0000000 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.c +++ /dev/null @@ -1,357 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "host.h" -#include "scic_sds_unsolicited_frame_control.h" -#include "scu_registers.h" -#include "sci_util.h" - -/** - * This method will program the unsolicited frames (UFs) into the UF address - * table and construct the UF frame structure being modeled in the core. It - * will handle the case where some of the UFs are not being used and thus - * should have entries programmed to zero in the address table. - * @uf_control: This parameter specifies the unsolicted frame control object - * for which to construct the unsolicited frames objects. - * @uf_buffer_phys_address: This parameter specifies the physical address for - * the first unsolicited frame buffer. - * @uf_buffer_virt_address: This parameter specifies the virtual address for - * the first unsolicited frame buffer. - * @unused_uf_header_entries: This parameter specifies the number of unused UF - * headers. This value can be non-zero when there are a non-power of 2 - * number of unsolicited frames being supported. - * @used_uf_header_entries: This parameter specifies the number of actually - * utilized UF headers. - * - */ -static void scic_sds_unsolicited_frame_control_construct_frames( - struct scic_sds_unsolicited_frame_control *uf_control, - dma_addr_t uf_buffer_phys_address, - void *uf_buffer_virt_address, - u32 unused_uf_header_entries, - u32 used_uf_header_entries) -{ - u32 index; - struct scic_sds_unsolicited_frame *uf; - - /* - * Program the unused buffers into the UF address table and the - * controller's array of UFs. - */ - for (index = 0; index < unused_uf_header_entries; index++) { - uf = &uf_control->buffers.array[index]; - - sci_cb_make_physical_address( - uf_control->address_table.array[index], 0, 0 - ); - uf->buffer = NULL; - uf->header = &uf_control->headers.array[index]; - uf->state = UNSOLICITED_FRAME_EMPTY; - } - - /* - * Program the actual used UF buffers into the UF address table and - * the controller's array of UFs. - */ - for (index = unused_uf_header_entries; - index < unused_uf_header_entries + used_uf_header_entries; - index++) { - uf = &uf_control->buffers.array[index]; - - uf_control->address_table.array[index] = uf_buffer_phys_address; - - uf->buffer = uf_buffer_virt_address; - uf->header = &uf_control->headers.array[index]; - uf->state = UNSOLICITED_FRAME_EMPTY; - - /* - * Increment the address of the physical and virtual memory - * pointers. Everything is aligned on 1k boundary with an - * increment of 1k. - */ - uf_buffer_virt_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; - uf_buffer_phys_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; - } -} - -int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic) -{ - struct scic_sds_unsolicited_frame_control *uf_control = &scic->uf_control; - u32 unused_uf_header_entries; - u32 used_uf_header_entries; - u32 used_uf_buffer_bytes; - u32 unused_uf_header_bytes; - u32 used_uf_header_bytes; - dma_addr_t uf_buffer_phys_address; - void *uf_buffer_virt_address; - size_t size; - - /* - * The UF buffer address table size must be programmed to a power - * of 2. Find the first power of 2 that is equal to or greater then - * the number of unsolicited frame buffers to be utilized. - */ - uf_control->address_table.count = SCU_MIN_UF_TABLE_ENTRIES; - while (uf_control->address_table.count < uf_control->buffers.count && - uf_control->address_table.count < SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES) - uf_control->address_table.count <<= 1; - - /* - * Prepare all of the memory sizes for the UF headers, UF address - * table, and UF buffers themselves. - */ - used_uf_buffer_bytes = uf_control->buffers.count - * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; - unused_uf_header_entries = uf_control->address_table.count - - uf_control->buffers.count; - used_uf_header_entries = uf_control->buffers.count; - unused_uf_header_bytes = unused_uf_header_entries - * sizeof(struct scu_unsolicited_frame_header); - used_uf_header_bytes = used_uf_header_entries - * sizeof(struct scu_unsolicited_frame_header); - - size = used_uf_buffer_bytes + used_uf_header_bytes + - uf_control->address_table.count * sizeof(dma_addr_t); - - - /* - * The Unsolicited Frame buffers are set at the start of the UF - * memory descriptor entry. The headers and address table will be - * placed after the buffers. - */ - uf_buffer_virt_address = dmam_alloc_coherent(scic_to_dev(scic), size, - &uf_buffer_phys_address, GFP_KERNEL); - if (!uf_buffer_virt_address) - return -ENOMEM; - - /* - * Program the location of the UF header table into the SCU. - * Notes: - * - The address must align on a 64-byte boundary. Guaranteed to be - * on 64-byte boundary already 1KB boundary for unsolicited frames. - * - Program unused header entries to overlap with the last - * unsolicited frame. The silicon will never DMA to these unused - * headers, since we program the UF address table pointers to - * NULL. - */ - uf_control->headers.physical_address = - uf_buffer_phys_address + - used_uf_buffer_bytes - - unused_uf_header_bytes; - - uf_control->headers.array = - uf_buffer_virt_address + - used_uf_buffer_bytes - - unused_uf_header_bytes; - - /* - * Program the location of the UF address table into the SCU. - * Notes: - * - The address must align on a 64-bit boundary. Guaranteed to be on 64 - * byte boundary already due to above programming headers being on a - * 64-bit boundary and headers are on a 64-bytes in size. - */ - uf_control->address_table.physical_address = - uf_buffer_phys_address + - used_uf_buffer_bytes + - used_uf_header_bytes; - - uf_control->address_table.array = - uf_buffer_virt_address + - used_uf_buffer_bytes + - used_uf_header_bytes; - - uf_control->get = 0; - - /* - * UF buffer requirements are: - * - The last entry in the UF queue is not NULL. - * - There is a power of 2 number of entries (NULL or not-NULL) - * programmed into the queue. - * - Aligned on a 1KB boundary. */ - - /* - * If the user provided less then the maximum amount of memory, - * then be sure that we programm the first entries in the UF - * address table to NULL. */ - scic_sds_unsolicited_frame_control_construct_frames( - uf_control, - uf_buffer_phys_address, - uf_buffer_virt_address, - unused_uf_header_entries, - used_uf_header_entries - ); - - return 0; -} - -/** - * This method returns the frame header for the specified frame index. - * @uf_control: - * @frame_index: - * @frame_header: - * - * enum sci_status - */ -enum sci_status scic_sds_unsolicited_frame_control_get_header( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index, - void **frame_header) -{ - if (frame_index < uf_control->address_table.count) { - /* - * Skip the first word in the frame since this is a controll word used - * by the hardware. */ - *frame_header = &uf_control->buffers.array[frame_index].header->data; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_PARAMETER_VALUE; -} - -/** - * This method returns the frame buffer for the specified frame index. - * @uf_control: - * @frame_index: - * @frame_buffer: - * - * enum sci_status - */ -enum sci_status scic_sds_unsolicited_frame_control_get_buffer( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index, - void **frame_buffer) -{ - if (frame_index < uf_control->address_table.count) { - *frame_buffer = uf_control->buffers.array[frame_index].buffer; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_PARAMETER_VALUE; -} - -/** - * This method releases the frame once this is done the frame is available for - * re-use by the hardware. The data contained in the frame header and frame - * buffer is no longer valid. - * @uf_control: This parameter specifies the UF control object - * @frame_index: This parameter specifies the frame index to attempt to release. - * - * This method returns an indication to the caller as to whether the - * unsolicited frame get pointer should be updated. - */ -bool scic_sds_unsolicited_frame_control_release_frame( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index) -{ - u32 frame_get; - u32 frame_cycle; - - frame_get = uf_control->get & (uf_control->address_table.count - 1); - frame_cycle = uf_control->get & uf_control->address_table.count; - - /* - * In the event there are NULL entries in the UF table, we need to - * advance the get pointer in order to find out if this frame should - * be released (i.e. update the get pointer). */ - while (((lower_32_bits(uf_control->address_table.array[frame_get]) - == 0) && - (upper_32_bits(uf_control->address_table.array[frame_get]) - == 0)) && - (frame_get < uf_control->address_table.count)) - frame_get++; - - /* - * The table has a NULL entry as it's last element. This is - * illegal. */ - BUG_ON(frame_get >= uf_control->address_table.count); - - if (frame_index < uf_control->address_table.count) { - uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED; - - /* - * The frame index is equal to the current get pointer so we - * can now free up all of the frame entries that */ - if (frame_get == frame_index) { - while ( - uf_control->buffers.array[frame_get].state - == UNSOLICITED_FRAME_RELEASED - ) { - uf_control->buffers.array[frame_get].state = UNSOLICITED_FRAME_EMPTY; - - INCREMENT_QUEUE_GET( - frame_get, - frame_cycle, - uf_control->address_table.count - 1, - uf_control->address_table.count - ); - } - - uf_control->get = - (SCU_UFQGP_GEN_BIT(ENABLE_BIT) | frame_cycle | frame_get); - - return true; - } else { - /* - * Frames remain in use until we advance the get pointer - * so there is nothing we can do here */ - } - } - - return false; -} - diff --git a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h b/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h deleted file mode 100644 index 0d8ca8c..0000000 --- a/drivers/scsi/isci/core/scic_sds_unsolicited_frame_control.h +++ /dev/null @@ -1,251 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ -#define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ - -#include "isci.h" -#include "scu_unsolicited_frame.h" - -/** - * enum unsolicited_frame_state - - * - * This enumeration represents the current unsolicited frame state. The - * controller object can not updtate the hardware unsolicited frame put pointer - * unless it has already processed the priror unsolicited frames. - */ -enum unsolicited_frame_state { - /** - * This state is when the frame is empty and not in use. It is - * different from the released state in that the hardware could DMA - * data to this frame buffer. - */ - UNSOLICITED_FRAME_EMPTY, - - /** - * This state is set when the frame buffer is in use by by some - * object in the system. - */ - UNSOLICITED_FRAME_IN_USE, - - /** - * This state is set when the frame is returned to the free pool - * but one or more frames prior to this one are still in use. - * Once all of the frame before this one are freed it will go to - * the empty state. - */ - UNSOLICITED_FRAME_RELEASED, - - UNSOLICITED_FRAME_MAX_STATES -}; - -/** - * struct scic_sds_unsolicited_frame - - * - * This is the unsolicited frame data structure it acts as the container for - * the current frame state, frame header and frame buffer. - */ -struct scic_sds_unsolicited_frame { - /** - * This field contains the current frame state - */ - enum unsolicited_frame_state state; - - /** - * This field points to the frame header data. - */ - struct scu_unsolicited_frame_header *header; - - /** - * This field points to the frame buffer data. - */ - void *buffer; - -}; - -/** - * struct scic_sds_uf_header_array - - * - * This structure contains all of the unsolicited frame header information. - */ -struct scic_sds_uf_header_array { - /** - * This field is represents a virtual pointer to the start - * address of the UF address table. The table contains - * 64-bit pointers as required by the hardware. - */ - struct scu_unsolicited_frame_header *array; - - /** - * This field specifies the physical address location for the UF - * buffer array. - */ - dma_addr_t physical_address; - -}; - -/** - * struct scic_sds_uf_buffer_array - - * - * This structure contains all of the unsolicited frame buffer (actual payload) - * information. - */ -struct scic_sds_uf_buffer_array { - /** - * This field is the minimum number of unsolicited frames supported by the - * hardware and the number of unsolicited frames requested by the software. - */ - u32 count; - - /** - * This field is the SCIC_UNSOLICITED_FRAME data its used to manage - * the data for the unsolicited frame requests. It also represents - * the virtual address location that corresponds to the - * physical_address field. - */ - struct scic_sds_unsolicited_frame array[SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE]; - - /** - * This field specifies the physical address location for the UF - * buffer array. - */ - dma_addr_t physical_address; - -}; - -/** - * struct scic_sds_uf_address_table_array - - * - * This object maintains all of the unsolicited frame address table specific - * data. The address table is a collection of 64-bit pointers that point to - * 1KB buffers into which the silicon will DMA unsolicited frames. - */ -struct scic_sds_uf_address_table_array { - /** - * This field specifies the actual programmed size of the - * unsolicited frame buffer address table. The size of the table - * can be larger than the actual number of UF buffers, but it must - * be a power of 2 and the last entry in the table is not allowed - * to be NULL. - */ - u32 count; - - /** - * This field represents a virtual pointer that refers to the - * starting address of the UF address table. - * 64-bit pointers are required by the hardware. - */ - dma_addr_t *array; - - /** - * This field specifies the physical address location for the UF - * address table. - */ - dma_addr_t physical_address; - -}; - -/** - * struct scic_sds_unsolicited_frame_control - - * - * This object contains all of the data necessary to handle unsolicited frames. - */ -struct scic_sds_unsolicited_frame_control { - /** - * This field is the software copy of the unsolicited frame queue - * get pointer. The controller object writes this value to the - * hardware to let the hardware put more unsolicited frame entries. - */ - u32 get; - - /** - * This field contains all of the unsolicited frame header - * specific fields. - */ - struct scic_sds_uf_header_array headers; - - /** - * This field contains all of the unsolicited frame buffer - * specific fields. - */ - struct scic_sds_uf_buffer_array buffers; - - /** - * This field contains all of the unsolicited frame address table - * specific fields. - */ - struct scic_sds_uf_address_table_array address_table; - -}; - -struct scic_sds_controller; - -int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic); - -enum sci_status scic_sds_unsolicited_frame_control_get_header( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index, - void **frame_header); - -enum sci_status scic_sds_unsolicited_frame_control_get_buffer( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index, - void **frame_buffer); - -bool scic_sds_unsolicited_frame_control_release_frame( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index); - -#endif /* _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ */ diff --git a/drivers/scsi/isci/core/scu_completion_codes.h b/drivers/scsi/isci/core/scu_completion_codes.h deleted file mode 100644 index c8b329c..0000000 --- a/drivers/scsi/isci/core/scu_completion_codes.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCU_COMPLETION_CODES_HEADER_ -#define _SCU_COMPLETION_CODES_HEADER_ - -/** - * This file contains the constants and macros for the SCU hardware completion - * codes. - * - * - */ - -#define SCU_COMPLETION_TYPE_SHIFT 28 -#define SCU_COMPLETION_TYPE_MASK 0x70000000 - -/** - * SCU_COMPLETION_TYPE() - - * - * This macro constructs an SCU completion type - */ -#define SCU_COMPLETION_TYPE(type) \ - ((u32)(type) << SCU_COMPLETION_TYPE_SHIFT) - -/** - * SCU_COMPLETION_TYPE() - - * - * These macros contain the SCU completion types SCU_COMPLETION_TYPE - */ -#define SCU_COMPLETION_TYPE_TASK SCU_COMPLETION_TYPE(0) -#define SCU_COMPLETION_TYPE_SDMA SCU_COMPLETION_TYPE(1) -#define SCU_COMPLETION_TYPE_UFI SCU_COMPLETION_TYPE(2) -#define SCU_COMPLETION_TYPE_EVENT SCU_COMPLETION_TYPE(3) -#define SCU_COMPLETION_TYPE_NOTIFY SCU_COMPLETION_TYPE(4) - -/** - * - * - * These constants provide the shift and mask values for the various parts of - * an SCU completion code. - */ -#define SCU_COMPLETION_STATUS_MASK 0x0FFC0000 -#define SCU_COMPLETION_TL_STATUS_MASK 0x0FC00000 -#define SCU_COMPLETION_TL_STATUS_SHIFT 22 -#define SCU_COMPLETION_SDMA_STATUS_MASK 0x003C0000 -#define SCU_COMPLETION_PEG_MASK 0x00010000 -#define SCU_COMPLETION_PORT_MASK 0x00007000 -#define SCU_COMPLETION_PE_MASK SCU_COMPLETION_PORT_MASK -#define SCU_COMPLETION_PE_SHIFT 12 -#define SCU_COMPLETION_INDEX_MASK 0x00000FFF - -/** - * SCU_GET_COMPLETION_TYPE() - - * - * This macro returns the SCU completion type. - */ -#define SCU_GET_COMPLETION_TYPE(completion_code) \ - ((completion_code) & SCU_COMPLETION_TYPE_MASK) - -/** - * SCU_GET_COMPLETION_STATUS() - - * - * This macro returns the SCU completion status. - */ -#define SCU_GET_COMPLETION_STATUS(completion_code) \ - ((completion_code) & SCU_COMPLETION_STATUS_MASK) - -/** - * SCU_GET_COMPLETION_TL_STATUS() - - * - * This macro returns the transport layer completion status. - */ -#define SCU_GET_COMPLETION_TL_STATUS(completion_code) \ - ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) - -/** - * SCU_MAKE_COMPLETION_STATUS() - - * - * This macro takes a completion code and performs the shift and mask - * operations to turn it into a completion code that can be compared to a - * SCU_GET_COMPLETION_TL_STATUS. - */ -#define SCU_MAKE_COMPLETION_STATUS(completion_code) \ - ((u32)(completion_code) << SCU_COMPLETION_TL_STATUS_SHIFT) - -/** - * SCU_NORMALIZE_COMPLETION_STATUS() - - * - * This macro takes a SCU_GET_COMPLETION_TL_STATUS and normalizes it for a - * return code. - */ -#define SCU_NORMALIZE_COMPLETION_STATUS(completion_code) \ - (\ - ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) \ - >> SCU_COMPLETION_TL_STATUS_SHIFT \ - ) - -/** - * SCU_GET_COMPLETION_SDMA_STATUS() - - * - * This macro returns the SDMA completion status. - */ -#define SCU_GET_COMPLETION_SDMA_STATUS(completion_code) \ - ((completion_code) & SCU_COMPLETION_SDMA_STATUS_MASK) - -/** - * SCU_GET_COMPLETION_PEG() - - * - * This macro returns the Protocol Engine Group from the completion code. - */ -#define SCU_GET_COMPLETION_PEG(completion_code) \ - ((completion_code) & SCU_COMPLETION_PEG_MASK) - -/** - * SCU_GET_COMPLETION_PORT() - - * - * This macro reuturns the logical port index from the completion code. - */ -#define SCU_GET_COMPLETION_PORT(completion_code) \ - ((completion_code) & SCU_COMPLETION_PORT_MASK) - -/** - * SCU_GET_PROTOCOL_ENGINE_INDEX() - - * - * This macro returns the PE index from the completion code. - */ -#define SCU_GET_PROTOCOL_ENGINE_INDEX(completion_code) \ - (((completion_code) & SCU_COMPLETION_PE_MASK) >> SCU_COMPLETION_PE_SHIFT) - -/** - * SCU_GET_COMPLETION_INDEX() - - * - * This macro returns the index of the completion which is either a TCi or an - * RNi depending on the completion type. - */ -#define SCU_GET_COMPLETION_INDEX(completion_code) \ - ((completion_code) & SCU_COMPLETION_INDEX_MASK) - -#define SCU_UNSOLICITED_FRAME_MASK 0x0FFF0000 -#define SCU_UNSOLICITED_FRAME_SHIFT 16 - -/** - * SCU_GET_FRAME_INDEX() - - * - * This macro returns a normalized frame index from an unsolicited frame - * completion. - */ -#define SCU_GET_FRAME_INDEX(completion_code) \ - (\ - ((completion_code) & SCU_UNSOLICITED_FRAME_MASK) \ - >> SCU_UNSOLICITED_FRAME_SHIFT \ - ) - -#define SCU_UNSOLICITED_FRAME_ERROR_MASK 0x00008000 - -/** - * SCU_GET_FRAME_ERROR() - - * - * This macro returns a zero (0) value if there is no frame error otherwise it - * returns non-zero (!0). - */ -#define SCU_GET_FRAME_ERROR(completion_code) \ - ((completion_code) & SCU_UNSOLICITED_FRAME_ERROR_MASK) - -/** - * - * - * These constants represent normalized completion codes which must be shifted - * 18 bits to match it with the hardware completion code. In a 16-bit compiler, - * immediate constants are 16-bit values (the size of an int). If we shift - * those by 18 bits, we completely lose the value. To ensure the value is a - * 32-bit value like we want, each immediate value must be cast to a u32. - */ -#define SCU_TASK_DONE_GOOD ((u32)0x00) -#define SCU_TASK_DONE_CRC_ERR ((u32)0x14) -#define SCU_TASK_DONE_CHECK_RESPONSE ((u32)0x14) -#define SCU_TASK_DONE_GEN_RESPONSE ((u32)0x15) -#define SCU_TASK_DONE_NAK_CMD_ERR ((u32)0x16) -#define SCU_TASK_DONE_CMD_LL_R_ERR ((u32)0x16) -#define SCU_TASK_DONE_LL_R_ERR ((u32)0x17) -#define SCU_TASK_DONE_ACK_NAK_TO ((u32)0x17) -#define SCU_TASK_DONE_LL_PERR ((u32)0x18) -#define SCU_TASK_DONE_LL_SY_TERM ((u32)0x19) -#define SCU_TASK_DONE_NAK_ERR ((u32)0x19) -#define SCU_TASK_DONE_LL_LF_TERM ((u32)0x1A) -#define SCU_TASK_DONE_DATA_LEN_ERR ((u32)0x1A) -#define SCU_TASK_DONE_LL_CL_TERM ((u32)0x1B) -#define SCU_TASK_DONE_LL_ABORT_ERR ((u32)0x1B) -#define SCU_TASK_DONE_SEQ_INV_TYPE ((u32)0x1C) -#define SCU_TASK_DONE_UNEXP_XR ((u32)0x1C) -#define SCU_TASK_DONE_INV_FIS_TYPE ((u32)0x1D) -#define SCU_TASK_DONE_XR_IU_LEN_ERR ((u32)0x1D) -#define SCU_TASK_DONE_INV_FIS_LEN ((u32)0x1E) -#define SCU_TASK_DONE_XR_WD_LEN ((u32)0x1E) -#define SCU_TASK_DONE_SDMA_ERR ((u32)0x1F) -#define SCU_TASK_DONE_OFFSET_ERR ((u32)0x20) -#define SCU_TASK_DONE_MAX_PLD_ERR ((u32)0x21) -#define SCU_TASK_DONE_EXCESS_DATA ((u32)0x22) -#define SCU_TASK_DONE_LF_ERR ((u32)0x23) -#define SCU_TASK_DONE_UNEXP_FIS ((u32)0x24) -#define SCU_TASK_DONE_UNEXP_RESP ((u32)0x24) -#define SCU_TASK_DONE_EARLY_RESP ((u32)0x25) -#define SCU_TASK_DONE_SMP_RESP_TO_ERR ((u32)0x26) -#define SCU_TASK_DONE_DMASETUP_DIRERR ((u32)0x27) -#define SCU_TASK_DONE_SMP_UFI_ERR ((u32)0x27) -#define SCU_TASK_DONE_XFERCNT_ERR ((u32)0x28) -#define SCU_TASK_DONE_SMP_FRM_TYPE_ERR ((u32)0x28) -#define SCU_TASK_DONE_SMP_LL_RX_ERR ((u32)0x29) -#define SCU_TASK_DONE_RESP_LEN_ERR ((u32)0x2A) -#define SCU_TASK_DONE_UNEXP_DATA ((u32)0x2B) -#define SCU_TASK_DONE_OPEN_FAIL ((u32)0x2C) -#define SCU_TASK_DONE_UNEXP_SDBFIS ((u32)0x2D) -#define SCU_TASK_DONE_REG_ERR ((u32)0x2E) -#define SCU_TASK_DONE_SDB_ERR ((u32)0x2F) -#define SCU_TASK_DONE_TASK_ABORT ((u32)0x30) -#define SCU_TASK_DONE_CMD_SDMA_ERR ((U32)0x32) -#define SCU_TASK_DONE_CMD_LL_ABORT_ERR ((U32)0x33) -#define SCU_TASK_OPEN_REJECT_WRONG_DESTINATION ((u32)0x34) -#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1 ((u32)0x35) -#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2 ((u32)0x36) -#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3 ((u32)0x37) -#define SCU_TASK_OPEN_REJECT_BAD_DESTINATION ((u32)0x38) -#define SCU_TASK_OPEN_REJECT_ZONE_VIOLATION ((u32)0x39) -#define SCU_TASK_DONE_VIIT_ENTRY_NV ((u32)0x3A) -#define SCU_TASK_DONE_IIT_ENTRY_NV ((u32)0x3B) -#define SCU_TASK_DONE_RNCNV_OUTBOUND ((u32)0x3C) -#define SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY ((u32)0x3D) -#define SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED ((u32)0x3E) -#define SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED ((u32)0x3F) - -#endif /* _SCU_COMPLETION_CODES_HEADER_ */ diff --git a/drivers/scsi/isci/core/scu_event_codes.h b/drivers/scsi/isci/core/scu_event_codes.h deleted file mode 100644 index 36a945a..0000000 --- a/drivers/scsi/isci/core/scu_event_codes.h +++ /dev/null @@ -1,336 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef __SCU_EVENT_CODES_HEADER__ -#define __SCU_EVENT_CODES_HEADER__ - -/** - * This file contains the constants and macros for the SCU event codes. - * - * - */ - -#define SCU_EVENT_TYPE_CODE_SHIFT 24 -#define SCU_EVENT_TYPE_CODE_MASK 0x0F000000 - -#define SCU_EVENT_SPECIFIC_CODE_SHIFT 18 -#define SCU_EVENT_SPECIFIC_CODE_MASK 0x00FC0000 - -#define SCU_EVENT_CODE_MASK \ - (SCU_EVENT_TYPE_CODE_MASK | SCU_EVENT_SPECIFIC_CODE_MASK) - -/** - * SCU_EVENT_TYPE() - - * - * This macro constructs an SCU event type from the type value. - */ -#define SCU_EVENT_TYPE(type) \ - ((u32)(type) << SCU_EVENT_TYPE_CODE_SHIFT) - -/** - * SCU_EVENT_SPECIFIC() - - * - * This macro constructs an SCU event specifier from the code value. - */ -#define SCU_EVENT_SPECIFIC(code) \ - ((u32)(code) << SCU_EVENT_SPECIFIC_CODE_SHIFT) - -/** - * SCU_EVENT_MESSAGE() - - * - * This macro constructs a combines an SCU event type and SCU event specifier - * from the type and code values. - */ -#define SCU_EVENT_MESSAGE(type, code) \ - ((type) | SCU_EVENT_SPECIFIC(code)) - -/** - * SCU_EVENT_TYPE() - - * - * SCU_EVENT_TYPES - */ -#define SCU_EVENT_TYPE_SMU_COMMAND_ERROR SCU_EVENT_TYPE(0x08) -#define SCU_EVENT_TYPE_SMU_PCQ_ERROR SCU_EVENT_TYPE(0x09) -#define SCU_EVENT_TYPE_SMU_ERROR SCU_EVENT_TYPE(0x00) -#define SCU_EVENT_TYPE_TRANSPORT_ERROR SCU_EVENT_TYPE(0x01) -#define SCU_EVENT_TYPE_BROADCAST_CHANGE SCU_EVENT_TYPE(0x02) -#define SCU_EVENT_TYPE_OSSP_EVENT SCU_EVENT_TYPE(0x03) -#define SCU_EVENT_TYPE_FATAL_MEMORY_ERROR SCU_EVENT_TYPE(0x0F) -#define SCU_EVENT_TYPE_RNC_SUSPEND_TX SCU_EVENT_TYPE(0x04) -#define SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX SCU_EVENT_TYPE(0x05) -#define SCU_EVENT_TYPE_RNC_OPS_MISC SCU_EVENT_TYPE(0x06) -#define SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT SCU_EVENT_TYPE(0x07) -#define SCU_EVENT_TYPE_ERR_CNT_EVENT SCU_EVENT_TYPE(0x0A) - -/** - * - * - * SCU_EVENT_SPECIFIERS - */ -#define SCU_EVENT_SPECIFIER_DRIVER_SUSPEND 0x20 -#define SCU_EVENT_SPECIFIER_RNC_RELEASE 0x00 - -/** - * - * - * SMU_COMMAND_EVENTS - */ -#define SCU_EVENT_INVALID_CONTEXT_COMMAND \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_COMMAND_ERROR, 0x00) - -/** - * - * - * SMU_PCQ_EVENTS - */ -#define SCU_EVENT_UNCORRECTABLE_PCQ_ERROR \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_PCQ_ERROR, 0x00) - -/** - * - * - * SMU_EVENTS - */ -#define SCU_EVENT_UNCORRECTABLE_REGISTER_WRITE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x02) -#define SCU_EVENT_UNCORRECTABLE_REGISTER_READ \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x03) -#define SCU_EVENT_PCIE_INTERFACE_ERROR \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x04) -#define SCU_EVENT_FUNCTION_LEVEL_RESET \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x05) - -/** - * - * - * TRANSPORT_LEVEL_ERRORS - */ -#define SCU_EVENT_ACK_NAK_TIMEOUT_ERROR \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_TRANSPORT_ERROR, 0x00) - -/** - * - * - * BROADCAST_CHANGE_EVENTS - */ -#define SCU_EVENT_BROADCAST_CHANGE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x01) -#define SCU_EVENT_BROADCAST_RESERVED0 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x02) -#define SCU_EVENT_BROADCAST_RESERVED1 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x03) -#define SCU_EVENT_BROADCAST_SES \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x04) -#define SCU_EVENT_BROADCAST_EXPANDER \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x05) -#define SCU_EVENT_BROADCAST_AEN \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x06) -#define SCU_EVENT_BROADCAST_RESERVED3 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x07) -#define SCU_EVENT_BROADCAST_RESERVED4 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x08) -#define SCU_EVENT_PE_SUSPENDED \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x09) - -/** - * - * - * OSSP_EVENTS - */ -#define SCU_EVENT_PORT_SELECTOR_DETECTED \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x10) -#define SCU_EVENT_SENT_PORT_SELECTION \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x11) -#define SCU_EVENT_HARD_RESET_TRANSMITTED \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x12) -#define SCU_EVENT_HARD_RESET_RECEIVED \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x13) -#define SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x15) -#define SCU_EVENT_LINK_FAILURE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x16) -#define SCU_EVENT_SATA_SPINUP_HOLD \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x17) -#define SCU_EVENT_SAS_15_SSC \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x18) -#define SCU_EVENT_SAS_15 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x19) -#define SCU_EVENT_SAS_30_SSC \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1A) -#define SCU_EVENT_SAS_30 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1B) -#define SCU_EVENT_SAS_60_SSC \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1C) -#define SCU_EVENT_SAS_60 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1D) -#define SCU_EVENT_SATA_15_SSC \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1E) -#define SCU_EVENT_SATA_15 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1F) -#define SCU_EVENT_SATA_30_SSC \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x20) -#define SCU_EVENT_SATA_30 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x21) -#define SCU_EVENT_SATA_60_SSC \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x22) -#define SCU_EVENT_SATA_60 \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x23) -#define SCU_EVENT_SAS_PHY_DETECTED \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x24) -#define SCU_EVENT_SATA_PHY_DETECTED \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x25) - -/** - * - * - * FATAL_INTERNAL_MEMORY_ERROR_EVENTS - */ -#define SCU_EVENT_TSC_RNSC_UNCORRECTABLE_ERROR \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x00) -#define SCU_EVENT_TC_RNC_UNCORRECTABLE_ERROR \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x01) -#define SCU_EVENT_ZPT_UNCORRECTABLE_ERROR \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x02) - -/** - * - * - * REMOTE_NODE_SUSPEND_EVENTS - */ -#define SCU_EVENT_TL_RNC_SUSPEND_TX \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x00) -#define SCU_EVENT_TL_RNC_SUSPEND_TX_RX \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x00) -#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x20) -#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX_RX \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x20) - -/** - * - * - * REMOTE_NODE_MISC_EVENTS - */ -#define SCU_EVENT_POST_RCN_RELEASE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, SCU_EVENT_SPECIFIER_RNC_RELEASE) -#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_ENABLE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x01) -#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_DISABLE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x02) -#define SCU_EVENT_POST_RNC_COMPLETE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x03) -#define SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x04) - -/** - * - * - * ERROR_COUNT_EVENT - */ -#define SCU_EVENT_RX_CREDIT_BLOCKED_RECEIVED \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x00) -#define SCU_EVENT_TX_DONE_CREDIT_TIMEOUT \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x01) -#define SCU_EVENT_RX_DONE_CREDIT_TIMEOUT \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x02) - -/** - * scu_get_event_type() - - * - * This macro returns the SCU event type from the event code. - */ -#define scu_get_event_type(event_code) \ - ((event_code) & SCU_EVENT_TYPE_CODE_MASK) - -/** - * scu_get_event_specifier() - - * - * This macro returns the SCU event specifier from the event code. - */ -#define scu_get_event_specifier(event_code) \ - ((event_code) & SCU_EVENT_SPECIFIC_CODE_MASK) - -/** - * scu_get_event_code() - - * - * This macro returns the combined SCU event type and SCU event specifier from - * the event code. - */ -#define scu_get_event_code(event_code) \ - ((event_code) & SCU_EVENT_CODE_MASK) - - -/** - * - * - * PTS_SCHEDULE_EVENT - */ -#define SCU_EVENT_SMP_RESPONSE_NO_PE \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x00) -#define SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE \ - scu_get_event_specifier(SCU_EVENT_SMP_RESPONSE_NO_PE) - -#define SCU_EVENT_TASK_TIMEOUT \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x01) -#define SCU_EVENT_SPECIFIC_TASK_TIMEOUT \ - scu_get_event_specifier(SCU_EVENT_TASK_TIMEOUT) - -#define SCU_EVENT_IT_NEXUS_TIMEOUT \ - SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x02) -#define SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT \ - scu_get_event_specifier(SCU_EVENT_IT_NEXUS_TIMEOUT) - - -#endif /* __SCU_EVENT_CODES_HEADER__ */ diff --git a/drivers/scsi/isci/core/scu_registers.h b/drivers/scsi/isci/core/scu_registers.h deleted file mode 100644 index 12f2bac..0000000 --- a/drivers/scsi/isci/core/scu_registers.h +++ /dev/null @@ -1,1826 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCU_REGISTERS_H_ -#define _SCU_REGISTERS_H_ - -/** - * This file contains the constants and structures for the SCU memory mapped - * registers. - * - * - */ - -#include "scu_viit_data.h" - - -/* Generate a value for an SCU register */ -#define SCU_GEN_VALUE(name, value) \ - (((value) << name ## _SHIFT) & (name ## _MASK)) - -/* - * Generate a bit value for an SCU register - * Make sure that the register MASK is just a single bit */ -#define SCU_GEN_BIT(name) \ - SCU_GEN_VALUE(name, ((u32)1)) - -#define SCU_SET_BIT(name, reg_value) \ - ((reg_value) | SCU_GEN_BIT(name)) - -#define SCU_CLEAR_BIT(name, reg_value) \ - ((reg_value)$ ~(SCU_GEN_BIT(name))) - -/* - * ***************************************************************************** - * Unions for bitfield definitions of SCU Registers - * SMU Post Context Port - * ***************************************************************************** */ -#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_SHIFT (0) -#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_MASK (0x00000FFF) -#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_SHIFT (12) -#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_MASK (0x0000F000) -#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_SHIFT (16) -#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_MASK (0x00030000) -#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_SHIFT (18) -#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_MASK (0x00FC0000) -#define SMU_POST_CONTEXT_PORT_RESERVED_MASK (0xFF000000) - -#define SMU_PCP_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SMU_POST_CONTEXT_PORT_ ## name, value) - -/* ***************************************************************************** */ -#define SMU_INTERRUPT_STATUS_COMPLETION_SHIFT (31) -#define SMU_INTERRUPT_STATUS_COMPLETION_MASK (0x80000000) -#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_SHIFT (1) -#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_MASK (0x00000002) -#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_SHIFT (0) -#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_MASK (0x00000001) -#define SMU_INTERRUPT_STATUS_RESERVED_MASK (0x7FFFFFFC) - -#define SMU_ISR_GEN_BIT(name) \ - SCU_GEN_BIT(SMU_INTERRUPT_STATUS_ ## name) - -#define SMU_ISR_QUEUE_ERROR SMU_ISR_GEN_BIT(QUEUE_ERROR) -#define SMU_ISR_QUEUE_SUSPEND SMU_ISR_GEN_BIT(QUEUE_SUSPEND) -#define SMU_ISR_COMPLETION SMU_ISR_GEN_BIT(COMPLETION) - -/* ***************************************************************************** */ -#define SMU_INTERRUPT_MASK_COMPLETION_SHIFT (31) -#define SMU_INTERRUPT_MASK_COMPLETION_MASK (0x80000000) -#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_SHIFT (1) -#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_MASK (0x00000002) -#define SMU_INTERRUPT_MASK_QUEUE_ERROR_SHIFT (0) -#define SMU_INTERRUPT_MASK_QUEUE_ERROR_MASK (0x00000001) -#define SMU_INTERRUPT_MASK_RESERVED_MASK (0x7FFFFFFC) - -#define SMU_IMR_GEN_BIT(name) \ - SCU_GEN_BIT(SMU_INTERRUPT_MASK_ ## name) - -#define SMU_IMR_QUEUE_ERROR SMU_IMR_GEN_BIT(QUEUE_ERROR) -#define SMU_IMR_QUEUE_SUSPEND SMU_IMR_GEN_BIT(QUEUE_SUSPEND) -#define SMU_IMR_COMPLETION SMU_IMR_GEN_BIT(COMPLETION) - -/* ***************************************************************************** */ -#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_SHIFT (0) -#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_MASK (0x0000001F) -#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_SHIFT (8) -#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_MASK (0x0000FF00) -#define SMU_INTERRUPT_COALESCING_CONTROL_RESERVED_MASK (0xFFFF00E0) - -#define SMU_ICC_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SMU_INTERRUPT_COALESCING_CONTROL_ ## name, value) - -/* ***************************************************************************** */ -#define SMU_TASK_CONTEXT_RANGE_START_SHIFT (0) -#define SMU_TASK_CONTEXT_RANGE_START_MASK (0x00000FFF) -#define SMU_TASK_CONTEXT_RANGE_ENDING_SHIFT (16) -#define SMU_TASK_CONTEXT_RANGE_ENDING_MASK (0x0FFF0000) -#define SMU_TASK_CONTEXT_RANGE_ENABLE_SHIFT (31) -#define SMU_TASK_CONTEXT_RANGE_ENABLE_MASK (0x80000000) -#define SMU_TASK_CONTEXT_RANGE_RESERVED_MASK (0x7000F000) - -#define SMU_TCR_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SMU_TASK_CONTEXT_RANGE_ ## name, value) - -#define SMU_TCR_GEN_BIT(name, value) \ - SCU_GEN_BIT(SMU_TASK_CONTEXT_RANGE_ ## name) - -/* ***************************************************************************** */ - -#define SMU_COMPLETION_QUEUE_PUT_POINTER_SHIFT (0) -#define SMU_COMPLETION_QUEUE_PUT_POINTER_MASK (0x00003FFF) -#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_SHIFT (15) -#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_MASK (0x00008000) -#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_SHIFT (16) -#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_MASK (0x03FF0000) -#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_SHIFT (26) -#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_MASK (0x04000000) -#define SMU_COMPLETION_QUEUE_PUT_RESERVED_MASK (0xF8004000) - -#define SMU_CQPR_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_PUT_ ## name, value) - -#define SMU_CQPR_GEN_BIT(name) \ - SCU_GEN_BIT(SMU_COMPLETION_QUEUE_PUT_ ## name) - -/* ***************************************************************************** */ - -#define SMU_COMPLETION_QUEUE_GET_POINTER_SHIFT (0) -#define SMU_COMPLETION_QUEUE_GET_POINTER_MASK (0x00003FFF) -#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT (15) -#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_MASK (0x00008000) -#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT (16) -#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK (0x03FF0000) -#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT (26) -#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_MASK (0x04000000) -#define SMU_COMPLETION_QUEUE_GET_ENABLE_SHIFT (30) -#define SMU_COMPLETION_QUEUE_GET_ENABLE_MASK (0x40000000) -#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_SHIFT (31) -#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_MASK (0x80000000) -#define SMU_COMPLETION_QUEUE_GET_RESERVED_MASK (0x38004000) - -#define SMU_CQGR_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_GET_ ## name, value) - -#define SMU_CQGR_GEN_BIT(name) \ - SCU_GEN_BIT(SMU_COMPLETION_QUEUE_GET_ ## name) - -#define SMU_CQGR_CYCLE_BIT \ - SMU_CQGR_GEN_BIT(CYCLE_BIT) - -#define SMU_CQGR_EVENT_CYCLE_BIT \ - SMU_CQGR_GEN_BIT(EVENT_CYCLE_BIT) - -#define SMU_CQGR_GET_POINTER_SET(value) \ - SMU_CQGR_GEN_VAL(POINTER, value) - - -/* ***************************************************************************** */ -#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_SHIFT (0) -#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_MASK (0x00003FFF) -#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_SHIFT (16) -#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_MASK (0x03FF0000) -#define SMU_COMPLETION_QUEUE_CONTROL_RESERVED_MASK (0xFC00C000) - -#define SMU_CQC_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_CONTROL_ ## name, value) - -#define SMU_CQC_QUEUE_LIMIT_SET(value) \ - SMU_CQC_GEN_VAL(QUEUE_LIMIT, value) - -#define SMU_CQC_EVENT_LIMIT_SET(value) \ - SMU_CQC_GEN_VAL(EVENT_LIMIT, value) - - -/* ***************************************************************************** */ -#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT (0) -#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK (0x00000FFF) -#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT (12) -#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK (0x00007000) -#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT (15) -#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK (0x07FF8000) -#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_SHIFT (27) -#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK (0x08000000) -#define SMU_DEVICE_CONTEXT_CAPACITY_RESERVED_MASK (0xF0000000) - -#define SMU_DCC_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SMU_DEVICE_CONTEXT_CAPACITY_ ## name, value) - -#define SMU_DCC_GET_MAX_PEG(value) \ - (\ - ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ - ) - -#define SMU_DCC_GET_MAX_LP(value) \ - (\ - ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ - ) - -#define SMU_DCC_GET_MAX_TC(value) \ - (\ - ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT \ - ) - -#define SMU_DCC_GET_MAX_RNC(value) \ - (\ - ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ - >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT \ - ) - -/* -------------------------------------------------------------------------- */ - -#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_SHIFT (0) -#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_MASK (0x00000001) -#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_SHIFT (1) -#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_MASK (0x00000002) -#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_SHIFT (16) -#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_MASK (0x00010000) -#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_SHIFT (17) -#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_MASK (0x00020000) -#define SMU_CONTROL_STATUS_RESERVED_MASK (0xFFFCFFFC) - -#define SMU_SMUCSR_GEN_BIT(name) \ - SCU_GEN_BIT(SMU_CONTROL_STATUS_ ## name) - -#define SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ - (SMU_SMUCSR_GEN_BIT(SCHEDULER_RAM_INIT_COMPLETED)) - -#define SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ - (SMU_SMUCSR_GEN_BIT(CONTEXT_RAM_INIT_COMPLETED)) - -#define SCU_RAM_INIT_COMPLETED \ - (\ - SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ - | SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ - ) - -/* -------------------------------------------------------------------------- */ - -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_SHIFT (0) -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_MASK (0x00000001) -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_SHIFT (1) -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_MASK (0x00000002) -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_SHIFT (2) -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_MASK (0x00000004) -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_SHIFT (3) -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_MASK (0x00000008) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_SHIFT (8) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_MASK (0x00000100) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_SHIFT (9) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_MASK (0x00000200) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_SHIFT (10) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_MASK (0x00000400) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_SHIFT (11) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_MASK (0x00000800) - -#define SMU_RESET_PROTOCOL_ENGINE(peg, pe) \ - ((1 << (pe)) << ((peg) * 8)) - -#define SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ - (\ - SMU_RESET_PROTOCOL_ENGINE(peg, 0) \ - | SMU_RESET_PROTOCOL_ENGINE(peg, 1) \ - | SMU_RESET_PROTOCOL_ENGINE(peg, 2) \ - | SMU_RESET_PROTOCOL_ENGINE(peg, 3) \ - ) - -#define SMU_RESET_ALL_PROTOCOL_ENGINES() \ - (\ - SMU_RESET_PEG_PROTOCOL_ENGINES(0) \ - | SMU_RESET_PEG_PROTOCOL_ENGINES(1) \ - ) - -#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_SHIFT (16) -#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_MASK (0x00010000) -#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_SHIFT (17) -#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_MASK (0x00020000) -#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_SHIFT (18) -#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_MASK (0x00040000) -#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_SHIFT (19) -#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_MASK (0x00080000) - -#define SMU_RESET_WIDE_PORT_QUEUE(peg, wide_port) \ - ((1 << ((wide_port) / 2)) << ((peg) * 2) << 16) - -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_SHIFT (20) -#define SMU_SOFTRESET_CONTROL_RESET_PEG0_MASK (0x00100000) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_SHIFT (21) -#define SMU_SOFTRESET_CONTROL_RESET_PEG1_MASK (0x00200000) -#define SMU_SOFTRESET_CONTROL_RESET_SCU_SHIFT (22) -#define SMU_SOFTRESET_CONTROL_RESET_SCU_MASK (0x00400000) - -/* - * It seems to make sense that if you are going to reset the protocol - * engine group that you would also reset all of the protocol engines */ -#define SMU_RESET_PROTOCOL_ENGINE_GROUP(peg) \ - (\ - (1 << ((peg) + 20)) \ - | SMU_RESET_WIDE_PORT_QUEUE(peg, 0) \ - | SMU_RESET_WIDE_PORT_QUEUE(peg, 1) \ - | SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ - ) - -#define SMU_RESET_ALL_PROTOCOL_ENGINE_GROUPS() \ - (\ - SMU_RESET_PROTOCOL_ENGINE_GROUP(0) \ - | SMU_RESET_PROTOCOL_ENGINE_GROUP(1) \ - ) - -#define SMU_RESET_SCU() (0xFFFFFFFF) - - - -/* ***************************************************************************** */ -#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_SHIFT (0) -#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_MASK (0x00000FFF) -#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_SHIFT (16) -#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_MASK (0x0FFF0000) -#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_SHIFT (31) -#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_MASK (0x80000000) -#define SMU_TASK_CONTEXT_ASSIGNMENT_RESERVED_MASK (0x7000F000) - -#define SMU_TCA_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name, value) - -#define SMU_TCA_GEN_BIT(name) \ - SCU_GEN_BIT(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name) - -/* ***************************************************************************** */ -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_SHIFT (0) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_MASK (0x00000FFF) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_RESERVED_MASK (0xFFFFF000) - -#define SCU_UFQC_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_ ## name, value) - -#define SCU_UFQC_QUEUE_SIZE_SET(value) \ - SCU_UFQC_GEN_VAL(QUEUE_SIZE, value) - -/* ***************************************************************************** */ -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_SHIFT (0) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_MASK (0x00000FFF) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_SHIFT (12) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_MASK (0x00001000) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_RESERVED_MASK (0xFFFFE000) - -#define SCU_UFQPP_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name, value) - -#define SCU_UFQPP_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name) - -/* - * ***************************************************************************** - * * SDMA Registers - * ***************************************************************************** */ -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_SHIFT (0) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_MASK (0x00000FFF) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_SHIFT (12) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_MASK (12) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_SHIFT (31) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_MASK (0x80000000) -#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_RESERVED_MASK (0x7FFFE000) - -#define SCU_UFQGP_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name, value) - -#define SCU_UFQGP_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name) - -#define SCU_UFQGP_CYCLE_BIT(value) \ - SCU_UFQGP_GEN_BIT(CYCLE_BIT, value) - -#define SCU_UFQGP_GET_POINTER(value) \ - SCU_UFQGP_GEN_VALUE(POINTER, value) - -#define SCU_UFQGP_ENABLE(value) \ - (SCU_UFQGP_GEN_BIT(ENABLE) | value) - -#define SCU_UFQGP_DISABLE(value) \ - (~SCU_UFQGP_GEN_BIT(ENABLE) & value) - -#define SCU_UFQGP_VALUE(bit, value) \ - (SCU_UFQGP_CYCLE_BIT(bit) | SCU_UFQGP_GET_POINTER(value)) - -/* ***************************************************************************** */ -#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SHIFT (0) -#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_MASK (0x0000FFFF) -#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (16) -#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00010000) -#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_SHIFT (17) -#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_MASK (0x00020000) -#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_SHIFT (18) -#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_MASK (0x00040000) -#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_SHIFT (19) -#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_MASK (0x00080000) -#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_SHIFT (20) -#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_MASK (0x00100000) -#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_SHIFT (21) -#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_MASK (0x00200000) -#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_SHIFT (22) -#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_MASK (0x00400000) -#define SCU_PDMA_CONFIGURATION_RESERVED_MASK (0xFF800000) - -#define SCU_PDMACR_GEN_VALUE(name, value) \ - SCU_GEN_VALUE(SCU_PDMA_CONFIGURATION_ ## name, value) - -#define SCU_PDMACR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_PDMA_CONFIGURATION_ ## name) - -#define SCU_PDMACR_BE_GEN_BIT(name) \ - SCU_PCMACR_GEN_BIT(BIG_ENDIAN_CONTROL_ ## name) - -/* ***************************************************************************** */ -#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (8) -#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00000100) - -#define SCU_CDMACR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_CDMA_CONFIGURATION_ ## name) - -/* - * ***************************************************************************** - * * SCU Link Layer Registers - * ***************************************************************************** */ -#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_SHIFT (0) -#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_MASK (0x000000FF) -#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_SHIFT (8) -#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_MASK (0x0000FF00) -#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_SHIFT (16) -#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_MASK (0x00FF0000) -#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_SHIFT (24) -#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_MASK (0xFF000000) -#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_REQUIRED_MASK (0x00000000) -#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_DEFAULT_MASK (0x7D00676F) -#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_RESERVED_MASK (0x00FF0000) - -#define SCU_SAS_SPDTOV_GEN_VALUE(name, value) \ - SCU_GEN_VALUE(SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_ ## name, value) - - -#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_SHIFT (2) -#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_MASK (0x00000004) -#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_SHIFT (4) -#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_MASK (0x00000010) -#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_SHIFT (5) -#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_MASK (0x00000020) -#define SCU_LINK_STATUS_RESERVED_MASK (0xFFFFFFCD) - -#define SCU_SAS_LLSTA_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_LINK_STATUS_ ## name) - - -/* TODO: Where is the SATA_PSELTOV register? */ - -/* - * ***************************************************************************** - * * SCU SAS Maximum Arbitration Wait Time Timeout Register - * ***************************************************************************** */ -#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_SHIFT (0) -#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_MASK (0x00007FFF) -#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_SHIFT (15) -#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_MASK (0x00008000) - -#define SCU_SAS_MAWTTOV_GEN_VALUE(name, value) \ - SCU_GEN_VALUE(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name, value) - -#define SCU_SAS_MAWTTOV_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name) - - -/* - * TODO: Where is the SAS_LNKTOV regsiter? - * TODO: Where is the SAS_PHYTOV register? */ - -#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT (1) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_MASK (0x00000002) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_SHIFT (2) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_MASK (0x00000004) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_SHIFT (3) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_MASK (0x00000008) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_SHIFT (8) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_MASK (0x00000100) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_SHIFT (9) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_MASK (0x00000200) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_SHIFT (10) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_MASK (0x00000400) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_SHIFT (11) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_MASK (0x00000800) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_SHIFT (16) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_MASK (0x000F0000) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_SHIFT (24) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_MASK (0x0F000000) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_SHIFT (28) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_MASK (0x70000000) -#define SCU_SAS_TRANSMIT_IDENTIFICATION_RESERVED_MASK (0x80F0F1F1) - -#define SCU_SAS_TIID_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name, value) - -#define SCU_SAS_TIID_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name) - -/* SAS Identify Frame PHY Identifier Register */ -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_SHIFT (16) -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_MASK (0x00010000) -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_SHIFT (17) -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_MASK (0x00020000) -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_SHIFT (18) -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_MASK (0x00040000) -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_SHIFT (24) -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_MASK (0xFF000000) -#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_RESERVED_MASK (0x00F800FF) - -#define SCU_SAS_TIPID_GEN_VALUE(name, value) \ - SCU_GEN_VALUE(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name, value) - -#define SCU_SAS_TIPID_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name) - - -#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_SHIFT (4) -#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_MASK (0x00000010) -#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_SHIFT (6) -#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_MASK (0x00000040) -#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_SHIFT (7) -#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_MASK (0x00000080) -#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_SHIFT (8) -#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_MASK (0x00000100) -#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_SHIFT (9) -#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_MASK (0x00000200) -#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_SHIFT (11) -#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_MASK (0x00000800) -#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_SHIFT (12) -#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_MASK (0x00001000) -#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_SHIFT (13) -#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_MASK (0x00002000) -#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_SHIFT (14) -#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_MASK (0x00004000) -#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_SHIFT (15) -#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_MASK (0x00008000) -#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_SHIFT (23) -#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_MASK (0x00800000) -#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_SHIFT (27) -#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_MASK (0x08000000) -#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_SHIFT (28) -#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_MASK (0x10000000) -#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_SHIFT (29) -#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_MASK (0x20000000) -#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_SHIFT (30) -#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_MASK (0x40000000) -#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_SHIFT (31) -#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_MASK (0x80000000) -#define SCU_SAS_PHY_CONFIGURATION_REQUIRED_MASK (0x0100000F) -#define SCU_SAS_PHY_CONFIGURATION_DEFAULT_MASK (0x4180100F) -#define SCU_SAS_PHY_CONFIGURATION_RESERVED_MASK (0x00000000) - -#define SCU_SAS_PCFG_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name) - -#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_SHIFT (0) -#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_MASK (0x000007FF) -#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_SHIFT (16) -#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_MASK (0x00ff0000) - -#define SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_##name, value) - -#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT (0) -#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK (0x0003FFFF) -#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_SHIFT (31) -#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_MASK (0x80000000) -#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_RESERVED_MASK (0x7FFC0000) - -#define SCU_ENSPINUP_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name, value) - -#define SCU_ENSPINUP_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name) - - -#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_SHIFT (1) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_MASK (0x00000002) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_SHIFT (4) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_MASK (0x000000F0) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_SHIFT (8) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_MASK (0x00000100) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_SHIFT (9) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_MASK (0x00000201) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_SHIFT (10) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_MASK (0x00000401) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_SHIFT (11) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_MASK (0x00000801) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_SHIFT (12) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_MASK (0x00001001) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_SHIFT (13) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_MASK (0x00002001) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_SHIFT (31) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_MASK (0x80000000) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_DEFAULT_MASK (0x00003F01) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_REQUIRED_MASK (0x00000001) -#define SCU_LINK_LAYER_PHY_CAPABILITIES_RESERVED_MASK (0x7FFFC00D) - -#define SCU_SAS_PHYCAP_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name, value) - -#define SCU_SAS_PHYCAP_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name) - - -#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_SHIFT (0) -#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_MASK (0x000000FF) -#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_SHIFT (31) -#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_MASK (0x80000000) -#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_RESERVED_MASK (0x7FFFFF00) - -#define SCU_PSZGCR_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name, value) - -#define SCU_PSZGCR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name) - -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_SHIFT (1) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_MASK (0x00000002) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_SHIFT (2) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_MASK (0x00000004) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_SHIFT (4) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_MASK (0x00000010) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_SHIFT (5) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_MASK (0x00000020) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_SHIFT (16) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_MASK (0x00030000) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_SHIFT (19) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_MASK (0x00080000) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_SHIFT (20) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_MASK (0x00300000) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_SHIFT (23) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_MASK (0x00800000) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_SHIFT (24) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_MASK (0x03000000) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_SHIFT (27) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_MASK (0x08000000) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_SHIFT (28) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_MASK (0x30000000) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_SHIFT (31) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_MASK (0x80000000) -#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_RESERVED_MASK (0x4444FFC9) - -#define SCU_PEG_SCUVZECR_GEN_VAL(name, val) \ - SCU_GEN_VALUE(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name, val) - -#define SCU_PEG_SCUVZECR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name) - - -/* - * ***************************************************************************** - * * Port Task Scheduler registers shift and mask values - * ***************************************************************************** */ -#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_SHIFT (0) -#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_MASK (0x0000FFFF) -#define SCU_PTSG_CONTROL_TASK_TIMEOUT_SHIFT (16) -#define SCU_PTSG_CONTROL_TASK_TIMEOUT_MASK (0x00FF0000) -#define SCU_PTSG_CONTROL_PTSG_ENABLE_SHIFT (24) -#define SCU_PTSG_CONTROL_PTSG_ENABLE_MASK (0x01000000) -#define SCU_PTSG_CONTROL_ETM_ENABLE_SHIFT (25) -#define SCU_PTSG_CONTROL_ETM_ENABLE_MASK (0x02000000) -#define SCU_PTSG_CONTROL_DEFAULT_MASK (0x00020002) -#define SCU_PTSG_CONTROL_REQUIRED_MASK (0x00000000) -#define SCU_PTSG_CONTROL_RESERVED_MASK (0xFC000000) - -#define SCU_PTSGCR_GEN_VAL(name, val) \ - SCU_GEN_VALUE(SCU_PTSG_CONTROL_ ## name, val) - -#define SCU_PTSGCR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_PTSG_CONTROL_ ## name) - - -/* ***************************************************************************** */ -#define SCU_PTSG_REAL_TIME_CLOCK_SHIFT (0) -#define SCU_PTSG_REAL_TIME_CLOCK_MASK (0x0000FFFF) -#define SCU_PTSG_REAL_TIME_CLOCK_RESERVED_MASK (0xFFFF0000) - -#define SCU_RTCR_GEN_VAL(name, val) \ - SCU_GEN_VALUE(SCU_PTSG_ ## name, val) - - -#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_SHIFT (0) -#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_MASK (0x00FFFFFF) -#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_RESERVED_MASK (0xFF000000) - -#define SCU_RTCCR_GEN_VAL(name, val) \ - SCU_GEN_VALUE(SCU_PTSG_REAL_TIME_CLOCK_CONTROL_ ## name, val) - - -#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_SHIFT (0) -#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_MASK (0x00000001) -#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_SHIFT (1) -#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_MASK (0x00000002) -#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_RESERVED_MASK (0xFFFFFFFC) - -#define SCU_PTSxCR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ ## name) - - -#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_SHIFT (0) -#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_MASK (0x00000001) -#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_SHIFT (1) -#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_MASK (0x00000002) -#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_SHIFT (2) -#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_MASK (0x00000004) -#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_RESERVED_MASK (0xFFFFFFF8) - -#define SCU_PTSxSR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name) - - -/* - * ***************************************************************************** - * * SGPIO Register shift and mask values - * ***************************************************************************** */ -#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT (0) -#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK (0x00000001) -#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT (1) -#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK (0x00000002) -#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2) -#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK (0x00000004) -#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT (15) -#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK (0x00008000) -#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK (0xFFFF7FF8) - -#define SCU_SGICRx_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name) - -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT (0) -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK (0x0000000F) -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT (4) -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK (0x000000F0) -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT (8) -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK (0x00000F00) -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT (12) -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK (0x0000F000) -#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000) - -#define SCU_SGPBRx_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value) - -#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT (0) -#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK (0x00000003) -#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT (4) -#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK (0x00000030) -#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT (8) -#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK (0x00000300) -#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT (12) -#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK (0x00003000) -#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK (0xFFFF8888) - -#define SCU_SGSDLRx_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) - -#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT (0) -#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK (0x00000003) -#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT (4) -#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK (0x00000030) -#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT (8) -#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK (0x00000300) -#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT (12) -#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK (0x00003000) -#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK (0xFFFF8888) - -#define SCU_SGSDURx_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) - -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT (0) -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK (0x00000003) -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT (4) -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK (0x00000030) -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT (8) -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK (0x00000300) -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT (12) -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK (0x00003000) -#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888) - -#define SCU_SGSIDLRx_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) - -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT (0) -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK (0x00000003) -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT (4) -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK (0x00000030) -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT (8) -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK (0x00000300) -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT (12) -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK (0x00003000) -#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888) - -#define SCU_SGSIDURx_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) - -#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT (0) -#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK (0x0000000F) -#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK (0xFFFFFFF0) - -#define SCU_SGVSCR_GEN_VAL(value) \ - SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value) - -#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT (0) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK (0x00000003) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT (2) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK (0x00000004) -#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT (3) -#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK (0x00000008) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT (4) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK (0x00000030) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT (6) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK (0x00000040) -#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT (7) -#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK (0x00000080) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT (8) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK (0x00000300) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT (10) -#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK (0x00000400) -#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT (11) -#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK (0x00000800) -#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK (0xFFFFF000) - -#define SCU_SGODSR_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value) - -#define SCU_SGODSR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name) - -/* - * ***************************************************************************** - * * SMU Registers - * ***************************************************************************** */ - -/* - * ---------------------------------------------------------------------------- - * SMU Registers - * These registers are based off of BAR0 - * - * To calculate the offset for other functions use - * BAR0 + FN# * SystemPageSize * 2 - * - * The TCA is only accessable from FN#0 (Physical Function) and each - * is programmed by (BAR0 + SCU_SMU_TCA_OFFSET + (FN# * 0x04)) or - * TCA0 for FN#0 is at BAR0 + 0x0400 - * TCA1 for FN#1 is at BAR0 + 0x0404 - * etc. - * ---------------------------------------------------------------------------- - * Accessable to all FN#s */ -#define SCU_SMU_PCP_OFFSET 0x0000 -#define SCU_SMU_AMR_OFFSET 0x0004 -#define SCU_SMU_ISR_OFFSET 0x0010 -#define SCU_SMU_IMR_OFFSET 0x0014 -#define SCU_SMU_ICC_OFFSET 0x0018 -#define SCU_SMU_HTTLBAR_OFFSET 0x0020 -#define SCU_SMU_HTTUBAR_OFFSET 0x0024 -#define SCU_SMU_TCR_OFFSET 0x0028 -#define SCU_SMU_CQLBAR_OFFSET 0x0030 -#define SCU_SMU_CQUBAR_OFFSET 0x0034 -#define SCU_SMU_CQPR_OFFSET 0x0040 -#define SCU_SMU_CQGR_OFFSET 0x0044 -#define SCU_SMU_CQC_OFFSET 0x0048 -/* Accessable to FN#0 only */ -#define SCU_SMU_RNCLBAR_OFFSET 0x0080 -#define SCU_SMU_RNCUBAR_OFFSET 0x0084 -#define SCU_SMU_DCC_OFFSET 0x0090 -#define SCU_SMU_DFC_OFFSET 0x0094 -#define SCU_SMU_SMUCSR_OFFSET 0x0098 -#define SCU_SMU_SCUSRCR_OFFSET 0x009C -#define SCU_SMU_SMAW_OFFSET 0x00A0 -#define SCU_SMU_SMDW_OFFSET 0x00A4 -/* Accessable to FN#0 only */ -#define SCU_SMU_TCA_OFFSET 0x0400 -/* Accessable to all FN#s */ -#define SCU_SMU_MT_MLAR0_OFFSET 0x2000 -#define SCU_SMU_MT_MUAR0_OFFSET 0x2004 -#define SCU_SMU_MT_MDR0_OFFSET 0x2008 -#define SCU_SMU_MT_VCR0_OFFSET 0x200C -#define SCU_SMU_MT_MLAR1_OFFSET 0x2010 -#define SCU_SMU_MT_MUAR1_OFFSET 0x2014 -#define SCU_SMU_MT_MDR1_OFFSET 0x2018 -#define SCU_SMU_MT_VCR1_OFFSET 0x201C -#define SCU_SMU_MPBA_OFFSET 0x3000 - -/** - * struct smu_registers - These are the SMU registers - * - * - */ -struct smu_registers { -/* 0x0000 PCP */ - u32 post_context_port; -/* 0x0004 AMR */ - u32 address_modifier; - u32 reserved_08; - u32 reserved_0C; -/* 0x0010 ISR */ - u32 interrupt_status; -/* 0x0014 IMR */ - u32 interrupt_mask; -/* 0x0018 ICC */ - u32 interrupt_coalesce_control; - u32 reserved_1C; -/* 0x0020 HTTLBAR */ - u32 host_task_table_lower; -/* 0x0024 HTTUBAR */ - u32 host_task_table_upper; -/* 0x0028 TCR */ - u32 task_context_range; - u32 reserved_2C; -/* 0x0030 CQLBAR */ - u32 completion_queue_lower; -/* 0x0034 CQUBAR */ - u32 completion_queue_upper; - u32 reserved_38; - u32 reserved_3C; -/* 0x0040 CQPR */ - u32 completion_queue_put; -/* 0x0044 CQGR */ - u32 completion_queue_get; -/* 0x0048 CQC */ - u32 completion_queue_control; - u32 reserved_4C; - u32 reserved_5x[4]; - u32 reserved_6x[4]; - u32 reserved_7x[4]; -/* - * Accessable to FN#0 only - * 0x0080 RNCLBAR */ - u32 remote_node_context_lower; -/* 0x0084 RNCUBAR */ - u32 remote_node_context_upper; - u32 reserved_88; - u32 reserved_8C; -/* 0x0090 DCC */ - u32 device_context_capacity; -/* 0x0094 DFC */ - u32 device_function_capacity; -/* 0x0098 SMUCSR */ - u32 control_status; -/* 0x009C SCUSRCR */ - u32 soft_reset_control; -/* 0x00A0 SMAW */ - u32 mmr_address_window; -/* 0x00A4 SMDW */ - u32 mmr_data_window; - u32 reserved_A8; - u32 reserved_AC; -/* A whole bunch of reserved space */ - u32 reserved_Bx[4]; - u32 reserved_Cx[4]; - u32 reserved_Dx[4]; - u32 reserved_Ex[4]; - u32 reserved_Fx[4]; - u32 reserved_1xx[64]; - u32 reserved_2xx[64]; - u32 reserved_3xx[64]; -/* - * Accessable to FN#0 only - * 0x0400 TCA */ - u32 task_context_assignment[256]; -/* MSI-X registers not included */ -}; - -/* - * ***************************************************************************** - * SDMA Registers - * ***************************************************************************** */ -#define SCU_SDMA_BASE 0x6000 -#define SCU_SDMA_PUFATLHAR_OFFSET 0x0000 -#define SCU_SDMA_PUFATUHAR_OFFSET 0x0004 -#define SCU_SDMA_UFLHBAR_OFFSET 0x0008 -#define SCU_SDMA_UFUHBAR_OFFSET 0x000C -#define SCU_SDMA_UFQC_OFFSET 0x0010 -#define SCU_SDMA_UFQPP_OFFSET 0x0014 -#define SCU_SDMA_UFQGP_OFFSET 0x0018 -#define SCU_SDMA_PDMACR_OFFSET 0x001C -#define SCU_SDMA_CDMACR_OFFSET 0x0080 - -/** - * struct scu_sdma_registers - These are the SCU SDMA Registers - * - * - */ -struct scu_sdma_registers { -/* 0x0000 PUFATLHAR */ - u32 uf_address_table_lower; -/* 0x0004 PUFATUHAR */ - u32 uf_address_table_upper; -/* 0x0008 UFLHBAR */ - u32 uf_header_base_address_lower; -/* 0x000C UFUHBAR */ - u32 uf_header_base_address_upper; -/* 0x0010 UFQC */ - u32 unsolicited_frame_queue_control; -/* 0x0014 UFQPP */ - u32 unsolicited_frame_put_pointer; -/* 0x0018 UFQGP */ - u32 unsolicited_frame_get_pointer; -/* 0x001C PDMACR */ - u32 pdma_configuration; -/* Reserved until offset 0x80 */ - u32 reserved_0020_007C[0x18]; -/* 0x0080 CDMACR */ - u32 cdma_configuration; -/* Remainder SDMA register space */ - u32 reserved_0084_0400[0xDF]; - -}; - -/* - * ***************************************************************************** - * * SCU Link Registers - * ***************************************************************************** */ -#define SCU_PEG0_OFFSET 0x0000 -#define SCU_PEG1_OFFSET 0x8000 - -#define SCU_TL0_OFFSET 0x0000 -#define SCU_TL1_OFFSET 0x0400 -#define SCU_TL2_OFFSET 0x0800 -#define SCU_TL3_OFFSET 0x0C00 - -#define SCU_LL_OFFSET 0x0080 -#define SCU_LL0_OFFSET (SCU_TL0_OFFSET + SCU_LL_OFFSET) -#define SCU_LL1_OFFSET (SCU_TL1_OFFSET + SCU_LL_OFFSET) -#define SCU_LL2_OFFSET (SCU_TL2_OFFSET + SCU_LL_OFFSET) -#define SCU_LL3_OFFSET (SCU_TL3_OFFSET + SCU_LL_OFFSET) - -/* Transport Layer Offsets (PEG + TL) */ -#define SCU_TLCR_OFFSET 0x0000 -#define SCU_TLADTR_OFFSET 0x0004 -#define SCU_TLTTMR_OFFSET 0x0008 -#define SCU_TLEECR0_OFFSET 0x000C -#define SCU_STPTLDARNI_OFFSET 0x0010 - - -#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_SHIFT (0) -#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_MASK (0x00000001) -#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_SHIFT (1) -#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_MASK (0x00000002) -#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_SHIFT (3) -#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_MASK (0x00000008) -#define SCU_TLCR_CMD_NAK_STATUS_CODE_SHIFT (4) -#define SCU_TLCR_CMD_NAK_STATUS_CODE_MASK (0x00000010) -#define SCU_TLCR_RESERVED_MASK (0xFFFFFFEB) - -#define SCU_TLCR_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_TLCR_ ## name) - -/** - * struct scu_transport_layer_registers - These are the SCU Transport Layer - * registers - * - * - */ -struct scu_transport_layer_registers { - /* 0x0000 TLCR */ - u32 control; - /* 0x0004 TLADTR */ - u32 arbitration_delay_timer; - /* 0x0008 TLTTMR */ - u32 timer_test_mode; - /* 0x000C reserved */ - u32 reserved_0C; - /* 0x0010 STPTLDARNI */ - u32 stp_rni; - /* 0x0014 TLFEWPORCTRL */ - u32 tlfe_wpo_read_control; - /* 0x0018 TLFEWPORDATA */ - u32 tlfe_wpo_read_data; - /* 0x001C RXTLSSCSR1 */ - u32 rxtl_single_step_control_status_1; - /* 0x0020 RXTLSSCSR2 */ - u32 rxtl_single_step_control_status_2; - /* 0x0024 AWTRDDCR */ - u32 tlfe_awt_retry_delay_debug_control; - /* Remainder of TL memory space */ - u32 reserved_0028_007F[0x16]; - -}; - -/* Protocol Engine Group Registers */ -#define SCU_SCUVZECRx_OFFSET 0x1080 - -/* Link Layer Offsets (PEG + TL + LL) */ -#define SCU_SAS_SPDTOV_OFFSET 0x0000 -#define SCU_SAS_LLSTA_OFFSET 0x0004 -#define SCU_SATA_PSELTOV_OFFSET 0x0008 -#define SCU_SAS_TIMETOV_OFFSET 0x0010 -#define SCU_SAS_LOSTOT_OFFSET 0x0014 -#define SCU_SAS_LNKTOV_OFFSET 0x0018 -#define SCU_SAS_PHYTOV_OFFSET 0x001C -#define SCU_SAS_AFERCNT_OFFSET 0x0020 -#define SCU_SAS_WERCNT_OFFSET 0x0024 -#define SCU_SAS_TIID_OFFSET 0x0028 -#define SCU_SAS_TIDNH_OFFSET 0x002C -#define SCU_SAS_TIDNL_OFFSET 0x0030 -#define SCU_SAS_TISSAH_OFFSET 0x0034 -#define SCU_SAS_TISSAL_OFFSET 0x0038 -#define SCU_SAS_TIPID_OFFSET 0x003C -#define SCU_SAS_TIRES2_OFFSET 0x0040 -#define SCU_SAS_ADRSTA_OFFSET 0x0044 -#define SCU_SAS_MAWTTOV_OFFSET 0x0048 -#define SCU_SAS_FRPLDFIL_OFFSET 0x0054 -#define SCU_SAS_RFCNT_OFFSET 0x0060 -#define SCU_SAS_TFCNT_OFFSET 0x0064 -#define SCU_SAS_RFDCNT_OFFSET 0x0068 -#define SCU_SAS_TFDCNT_OFFSET 0x006C -#define SCU_SAS_LERCNT_OFFSET 0x0070 -#define SCU_SAS_RDISERRCNT_OFFSET 0x0074 -#define SCU_SAS_CRERCNT_OFFSET 0x0078 -#define SCU_STPCTL_OFFSET 0x007C -#define SCU_SAS_PCFG_OFFSET 0x0080 -#define SCU_SAS_CLKSM_OFFSET 0x0084 -#define SCU_SAS_TXCOMWAKE_OFFSET 0x0088 -#define SCU_SAS_TXCOMINIT_OFFSET 0x008C -#define SCU_SAS_TXCOMSAS_OFFSET 0x0090 -#define SCU_SAS_COMINIT_OFFSET 0x0094 -#define SCU_SAS_COMWAKE_OFFSET 0x0098 -#define SCU_SAS_COMSAS_OFFSET 0x009C -#define SCU_SAS_SFERCNT_OFFSET 0x00A0 -#define SCU_SAS_CDFERCNT_OFFSET 0x00A4 -#define SCU_SAS_DNFERCNT_OFFSET 0x00A8 -#define SCU_SAS_PRSTERCNT_OFFSET 0x00AC -#define SCU_SAS_CNTCTL_OFFSET 0x00B0 -#define SCU_SAS_SSPTOV_OFFSET 0x00B4 -#define SCU_FTCTL_OFFSET 0x00B8 -#define SCU_FRCTL_OFFSET 0x00BC -#define SCU_FTWMRK_OFFSET 0x00C0 -#define SCU_ENSPINUP_OFFSET 0x00C4 -#define SCU_SAS_TRNTOV_OFFSET 0x00C8 -#define SCU_SAS_PHYCAP_OFFSET 0x00CC -#define SCU_SAS_PHYCTL_OFFSET 0x00D0 -#define SCU_SAS_LLCTL_OFFSET 0x00D8 -#define SCU_AFE_XCVRCR_OFFSET 0x00DC -#define SCU_AFE_LUTCR_OFFSET 0x00E0 - -#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0) -#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003) -#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0) -#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 (1) -#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 (2) -#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_SHIFT (2) -#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_MASK (0x000003FC) -#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_SHIFT (16) -#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_MASK (0x00010000) -#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_SHIFT (17) -#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_MASK (0x00020000) -#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_SHIFT (24) -#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_MASK (0xFF000000) -#define SCU_SAS_LINK_LAYER_CONTROL_RESERVED (0x00FCFC00) - -#define SCU_SAS_LLCTL_GEN_VAL(name, value) \ - SCU_GEN_VALUE(SCU_SAS_LINK_LAYER_CONTROL_ ## name, value) - -#define SCU_SAS_LLCTL_GEN_BIT(name) \ - SCU_GEN_BIT(SCU_SAS_LINK_LAYER_CONTROL_ ## name) - - -/* #define SCU_FRXHECR_DCNT_OFFSET 0x00B0 */ -#define SCU_PSZGCR_OFFSET 0x00E4 -#define SCU_SAS_RECPHYCAP_OFFSET 0x00E8 -/* #define SCU_TX_LUTSEL_OFFSET 0x00B8 */ - -#define SCU_SAS_PTxC_OFFSET 0x00D4 /* Same offset as SAS_TCTSTM */ - -/** - * struct scu_link_layer_registers - SCU Link Layer Registers - * - * - */ -struct scu_link_layer_registers { -/* 0x0000 SAS_SPDTOV */ - u32 speed_negotiation_timers; -/* 0x0004 SAS_LLSTA */ - u32 link_layer_status; -/* 0x0008 SATA_PSELTOV */ - u32 port_selector_timeout; - u32 reserved0C; -/* 0x0010 SAS_TIMETOV */ - u32 timeout_unit_value; -/* 0x0014 SAS_RCDTOV */ - u32 rcd_timeout; -/* 0x0018 SAS_LNKTOV */ - u32 link_timer_timeouts; -/* 0x001C SAS_PHYTOV */ - u32 sas_phy_timeouts; -/* 0x0020 SAS_AFERCNT */ - u32 received_address_frame_error_counter; -/* 0x0024 SAS_WERCNT */ - u32 invalid_dword_counter; -/* 0x0028 SAS_TIID */ - u32 transmit_identification; -/* 0x002C SAS_TIDNH */ - u32 sas_device_name_high; -/* 0x0030 SAS_TIDNL */ - u32 sas_device_name_low; -/* 0x0034 SAS_TISSAH */ - u32 source_sas_address_high; -/* 0x0038 SAS_TISSAL */ - u32 source_sas_address_low; -/* 0x003C SAS_TIPID */ - u32 identify_frame_phy_id; -/* 0x0040 SAS_TIRES2 */ - u32 identify_frame_reserved; -/* 0x0044 SAS_ADRSTA */ - u32 received_address_frame; -/* 0x0048 SAS_MAWTTOV */ - u32 maximum_arbitration_wait_timer_timeout; -/* 0x004C SAS_PTxC */ - u32 transmit_primitive; -/* 0x0050 SAS_RORES */ - u32 error_counter_event_notification_control; -/* 0x0054 SAS_FRPLDFIL */ - u32 frxq_payload_fill_threshold; -/* 0x0058 SAS_LLHANG_TOT */ - u32 link_layer_hang_detection_timeout; - u32 reserved_5C; -/* 0x0060 SAS_RFCNT */ - u32 received_frame_count; -/* 0x0064 SAS_TFCNT */ - u32 transmit_frame_count; -/* 0x0068 SAS_RFDCNT */ - u32 received_dword_count; -/* 0x006C SAS_TFDCNT */ - u32 transmit_dword_count; -/* 0x0070 SAS_LERCNT */ - u32 loss_of_sync_error_count; -/* 0x0074 SAS_RDISERRCNT */ - u32 running_disparity_error_count; -/* 0x0078 SAS_CRERCNT */ - u32 received_frame_crc_error_count; -/* 0x007C STPCTL */ - u32 stp_control; -/* 0x0080 SAS_PCFG */ - u32 phy_configuration; -/* 0x0084 SAS_CLKSM */ - u32 clock_skew_management; -/* 0x0088 SAS_TXCOMWAKE */ - u32 transmit_comwake_signal; -/* 0x008C SAS_TXCOMINIT */ - u32 transmit_cominit_signal; -/* 0x0090 SAS_TXCOMSAS */ - u32 transmit_comsas_signal; -/* 0x0094 SAS_COMINIT */ - u32 cominit_control; -/* 0x0098 SAS_COMWAKE */ - u32 comwake_control; -/* 0x009C SAS_COMSAS */ - u32 comsas_control; -/* 0x00A0 SAS_SFERCNT */ - u32 received_short_frame_count; -/* 0x00A4 SAS_CDFERCNT */ - u32 received_frame_without_credit_count; -/* 0x00A8 SAS_DNFERCNT */ - u32 received_frame_after_done_count; -/* 0x00AC SAS_PRSTERCNT */ - u32 phy_reset_problem_count; -/* 0x00B0 SAS_CNTCTL */ - u32 counter_control; -/* 0x00B4 SAS_SSPTOV */ - u32 ssp_timer_timeout_values; -/* 0x00B8 FTCTL */ - u32 ftx_control; -/* 0x00BC FRCTL */ - u32 frx_control; -/* 0x00C0 FTWMRK */ - u32 ftx_watermark; -/* 0x00C4 ENSPINUP */ - u32 notify_enable_spinup_control; -/* 0x00C8 SAS_TRNTOV */ - u32 sas_training_sequence_timer_values; -/* 0x00CC SAS_PHYCAP */ - u32 phy_capabilities; -/* 0x00D0 SAS_PHYCTL */ - u32 phy_control; - u32 reserved_d4; -/* 0x00D8 LLCTL */ - u32 link_layer_control; -/* 0x00DC AFE_XCVRCR */ - u32 afe_xcvr_control; -/* 0x00E0 AFE_LUTCR */ - u32 afe_lookup_table_control; -/* 0x00E4 PSZGCR */ - u32 phy_source_zone_group_control; -/* 0x00E8 SAS_RECPHYCAP */ - u32 receive_phycap; - u32 reserved_ec; -/* 0x00F0 SNAFERXRSTCTL */ - u32 speed_negotiation_afe_rx_reset_control; -/* 0x00F4 SAS_SSIPMCTL */ - u32 power_management_control; -/* 0x00F8 SAS_PSPREQ_PRIM */ - u32 sas_pm_partial_request_primitive; -/* 0x00FC SAS_PSSREQ_PRIM */ - u32 sas_pm_slumber_request_primitive; -/* 0x0100 SAS_PPSACK_PRIM */ - u32 sas_pm_ack_primitive_register; -/* 0x0104 SAS_PSNAK_PRIM */ - u32 sas_pm_nak_primitive_register; -/* 0x0108 SAS_SSIPMTOV */ - u32 sas_primitive_timeout; - u32 reserved_10c; -/* 0x0110 - 0x011C PLAPRDCTRLxREG */ - u32 pla_product_control[4]; -/* 0x0120 PLAPRDSUMREG */ - u32 pla_product_sum; -/* 0x0124 PLACONTROLREG */ - u32 pla_control; -/* Remainder of memory space 896 bytes */ - u32 reserved_0128_037f[0x96]; - -}; - -/* - * 0x00D4 // Same offset as SAS_TCTSTM SAS_PTxC - * u32 primitive_transmit_control; */ - -/* - * ---------------------------------------------------------------------------- - * SGPIO - * ---------------------------------------------------------------------------- */ -#define SCU_SGPIO_OFFSET 0x1400 - -/* #define SCU_SGPIO_OFFSET 0x6000 // later moves to 0x1400 see HSD 652625 */ -#define SCU_SGPIO_SGICR_OFFSET 0x0000 -#define SCU_SGPIO_SGPBR_OFFSET 0x0004 -#define SCU_SGPIO_SGSDLR_OFFSET 0x0008 -#define SCU_SGPIO_SGSDUR_OFFSET 0x000C -#define SCU_SGPIO_SGSIDLR_OFFSET 0x0010 -#define SCU_SGPIO_SGSIDUR_OFFSET 0x0014 -#define SCU_SGPIO_SGVSCR_OFFSET 0x0018 -/* Address from 0x0820 to 0x083C */ -#define SCU_SGPIO_SGODSR_OFFSET 0x0020 - -/** - * struct scu_sgpio_registers - SCU SGPIO Registers - * - * - */ -struct scu_sgpio_registers { -/* 0x0000 SGPIO_SGICR */ - u32 interface_control; -/* 0x0004 SGPIO_SGPBR */ - u32 blink_rate; -/* 0x0008 SGPIO_SGSDLR */ - u32 start_drive_lower; -/* 0x000C SGPIO_SGSDUR */ - u32 start_drive_upper; -/* 0x0010 SGPIO_SGSIDLR */ - u32 serial_input_lower; -/* 0x0014 SGPIO_SGSIDUR */ - u32 serial_input_upper; -/* 0x0018 SGPIO_SGVSCR */ - u32 vendor_specific_code; -/* 0x0020 SGPIO_SGODSR */ - u32 ouput_data_select[8]; -/* Remainder of memory space 256 bytes */ - u32 reserved_1444_14ff[0x31]; - -}; - -/* - * ***************************************************************************** - * * Defines for VIIT entry offsets - * * Access additional entries by SCU_VIIT_BASE + index * 0x10 - * ***************************************************************************** */ -#define SCU_VIIT_BASE 0x1c00 - -struct scu_viit_registers { - u32 registers[256]; -}; - -/* - * ***************************************************************************** - * * SCU PORT TASK SCHEDULER REGISTERS - * ***************************************************************************** */ - -#define SCU_PTSG_BASE 0x1000 - -#define SCU_PTSG_PTSGCR_OFFSET 0x0000 -#define SCU_PTSG_RTCR_OFFSET 0x0004 -#define SCU_PTSG_RTCCR_OFFSET 0x0008 -#define SCU_PTSG_PTS0CR_OFFSET 0x0010 -#define SCU_PTSG_PTS0SR_OFFSET 0x0014 -#define SCU_PTSG_PTS1CR_OFFSET 0x0018 -#define SCU_PTSG_PTS1SR_OFFSET 0x001C -#define SCU_PTSG_PTS2CR_OFFSET 0x0020 -#define SCU_PTSG_PTS2SR_OFFSET 0x0024 -#define SCU_PTSG_PTS3CR_OFFSET 0x0028 -#define SCU_PTSG_PTS3SR_OFFSET 0x002C -#define SCU_PTSG_PCSPE0CR_OFFSET 0x0030 -#define SCU_PTSG_PCSPE1CR_OFFSET 0x0034 -#define SCU_PTSG_PCSPE2CR_OFFSET 0x0038 -#define SCU_PTSG_PCSPE3CR_OFFSET 0x003C -#define SCU_PTSG_ETMTSCCR_OFFSET 0x0040 -#define SCU_PTSG_ETMRNSCCR_OFFSET 0x0044 - -/** - * struct scu_port_task_scheduler_registers - These are the control/stats pairs - * for each Port Task Scheduler. - * - * - */ -struct scu_port_task_scheduler_registers { - u32 control; - u32 status; -}; - -/** - * struct scu_port_task_scheduler_group_registers - These are the PORT Task - * Scheduler registers - * - * - */ -struct scu_port_task_scheduler_group_registers { -/* 0x0000 PTSGCR */ - u32 control; -/* 0x0004 RTCR */ - u32 real_time_clock; -/* 0x0008 RTCCR */ - u32 real_time_clock_control; -/* 0x000C */ - u32 reserved_0C; -/* - * 0x0010 PTS0CR - * 0x0014 PTS0SR - * 0x0018 PTS1CR - * 0x001C PTS1SR - * 0x0020 PTS2CR - * 0x0024 PTS2SR - * 0x0028 PTS3CR - * 0x002C PTS3SR */ - struct scu_port_task_scheduler_registers port[4]; -/* - * 0x0030 PCSPE0CR - * 0x0034 PCSPE1CR - * 0x0038 PCSPE2CR - * 0x003C PCSPE3CR */ - u32 protocol_engine[4]; -/* 0x0040 ETMTSCCR */ - u32 tc_scanning_interval_control; -/* 0x0044 ETMRNSCCR */ - u32 rnc_scanning_interval_control; -/* Remainder of memory space 128 bytes */ - u32 reserved_1048_107f[0x0E]; - -}; - -#define SCU_PTSG_SCUVZECR_OFFSET 0x003C - -/* - * ***************************************************************************** - * * AFE REGISTERS - * ***************************************************************************** */ -#define SCU_AFE_MMR_BASE 0xE000 - -/* - * AFE 0 is at offset 0x0800 - * AFE 1 is at offset 0x0900 - * AFE 2 is at offset 0x0a00 - * AFE 3 is at offset 0x0b00 */ -struct scu_afe_transceiver { - /* 0x0000 AFE_XCVR_CTRL0 */ - u32 afe_xcvr_control0; - /* 0x0004 AFE_XCVR_CTRL1 */ - u32 afe_xcvr_control1; - /* 0x0008 */ - u32 reserved_0008; - /* 0x000c afe_dfx_rx_control0 */ - u32 afe_dfx_rx_control0; - /* 0x0010 AFE_DFX_RX_CTRL1 */ - u32 afe_dfx_rx_control1; - /* 0x0014 */ - u32 reserved_0014; - /* 0x0018 AFE_DFX_RX_STS0 */ - u32 afe_dfx_rx_status0; - /* 0x001c AFE_DFX_RX_STS1 */ - u32 afe_dfx_rx_status1; - /* 0x0020 */ - u32 reserved_0020; - /* 0x0024 AFE_TX_CTRL */ - u32 afe_tx_control; - /* 0x0028 AFE_TX_AMP_CTRL0 */ - u32 afe_tx_amp_control0; - /* 0x002c AFE_TX_AMP_CTRL1 */ - u32 afe_tx_amp_control1; - /* 0x0030 AFE_TX_AMP_CTRL2 */ - u32 afe_tx_amp_control2; - /* 0x0034 AFE_TX_AMP_CTRL3 */ - u32 afe_tx_amp_control3; - /* 0x0038 afe_tx_ssc_control */ - u32 afe_tx_ssc_control; - /* 0x003c */ - u32 reserved_003c; - /* 0x0040 AFE_RX_SSC_CTRL0 */ - u32 afe_rx_ssc_control0; - /* 0x0044 AFE_RX_SSC_CTRL1 */ - u32 afe_rx_ssc_control1; - /* 0x0048 AFE_RX_SSC_CTRL2 */ - u32 afe_rx_ssc_control2; - /* 0x004c AFE_RX_EQ_STS0 */ - u32 afe_rx_eq_status0; - /* 0x0050 AFE_RX_EQ_STS1 */ - u32 afe_rx_eq_status1; - /* 0x0054 AFE_RX_CDR_STS */ - u32 afe_rx_cdr_status; - /* 0x0058 */ - u32 reserved_0058; - /* 0x005c AFE_CHAN_CTRL */ - u32 afe_channel_control; - /* 0x0060-0x006c */ - u32 reserved_0060_006c[0x04]; - /* 0x0070 AFE_XCVR_EC_STS0 */ - u32 afe_xcvr_error_capture_status0; - /* 0x0074 AFE_XCVR_EC_STS1 */ - u32 afe_xcvr_error_capture_status1; - /* 0x0078 AFE_XCVR_EC_STS2 */ - u32 afe_xcvr_error_capture_status2; - /* 0x007c afe_xcvr_ec_status3 */ - u32 afe_xcvr_error_capture_status3; - /* 0x0080 AFE_XCVR_EC_STS4 */ - u32 afe_xcvr_error_capture_status4; - /* 0x0084 AFE_XCVR_EC_STS5 */ - u32 afe_xcvr_error_capture_status5; - /* 0x0088-0x00fc */ - u32 reserved_008c_00fc[0x1e]; -}; - -/** - * struct scu_afe_registers - AFE Regsiters - * - * - */ -/* Uaoa AFE registers */ -struct scu_afe_registers { - /* 0Xe000 AFE_BIAS_CTRL */ - u32 afe_bias_control; - u32 reserved_0004; - /* 0x0008 AFE_PLL_CTRL0 */ - u32 afe_pll_control0; - /* 0x000c AFE_PLL_CTRL1 */ - u32 afe_pll_control1; - /* 0x0010 AFE_PLL_CTRL2 */ - u32 afe_pll_control2; - /* 0x0014 AFE_CB_STS */ - u32 afe_common_block_status; - /* 0x0018-0x007c */ - u32 reserved_18_7c[0x1a]; - /* 0x0080 AFE_PMSN_MCTRL0 */ - u32 afe_pmsn_master_control0; - /* 0x0084 AFE_PMSN_MCTRL1 */ - u32 afe_pmsn_master_control1; - /* 0x0088 AFE_PMSN_MCTRL2 */ - u32 afe_pmsn_master_control2; - /* 0x008C-0x00fc */ - u32 reserved_008c_00fc[0x1D]; - /* 0x0100 AFE_DFX_MST_CTRL0 */ - u32 afe_dfx_master_control0; - /* 0x0104 AFE_DFX_MST_CTRL1 */ - u32 afe_dfx_master_control1; - /* 0x0108 AFE_DFX_DCL_CTRL */ - u32 afe_dfx_dcl_control; - /* 0x010c AFE_DFX_DMON_CTRL */ - u32 afe_dfx_digital_monitor_control; - /* 0x0110 AFE_DFX_AMONP_CTRL */ - u32 afe_dfx_analog_p_monitor_control; - /* 0x0114 AFE_DFX_AMONN_CTRL */ - u32 afe_dfx_analog_n_monitor_control; - /* 0x0118 AFE_DFX_NTL_STS */ - u32 afe_dfx_ntl_status; - /* 0x011c AFE_DFX_FIFO_STS0 */ - u32 afe_dfx_fifo_status0; - /* 0x0120 AFE_DFX_FIFO_STS1 */ - u32 afe_dfx_fifo_status1; - /* 0x0124 AFE_DFX_MPAT_CTRL */ - u32 afe_dfx_master_pattern_control; - /* 0x0128 AFE_DFX_P0_CTRL */ - u32 afe_dfx_p0_control; - /* 0x012c-0x01a8 AFE_DFX_P0_DRx */ - u32 afe_dfx_p0_data[32]; - /* 0x01ac */ - u32 reserved_01ac; - /* 0x01b0-0x020c AFE_DFX_P0_IRx */ - u32 afe_dfx_p0_instruction[24]; - /* 0x0210 */ - u32 reserved_0210; - /* 0x0214 AFE_DFX_P1_CTRL */ - u32 afe_dfx_p1_control; - /* 0x0218-0x245 AFE_DFX_P1_DRx */ - u32 afe_dfx_p1_data[16]; - /* 0x0258-0x029c */ - u32 reserved_0258_029c[0x12]; - /* 0x02a0-0x02bc AFE_DFX_P1_IRx */ - u32 afe_dfx_p1_instruction[8]; - /* 0x02c0-0x2fc */ - u32 reserved_02c0_02fc[0x10]; - /* 0x0300 AFE_DFX_TX_PMSN_CTRL */ - u32 afe_dfx_tx_pmsn_control; - /* 0x0304 AFE_DFX_RX_PMSN_CTRL */ - u32 afe_dfx_rx_pmsn_control; - u32 reserved_0308; - /* 0x030c AFE_DFX_NOA_CTRL0 */ - u32 afe_dfx_noa_control0; - /* 0x0310 AFE_DFX_NOA_CTRL1 */ - u32 afe_dfx_noa_control1; - /* 0x0314 AFE_DFX_NOA_CTRL2 */ - u32 afe_dfx_noa_control2; - /* 0x0318 AFE_DFX_NOA_CTRL3 */ - u32 afe_dfx_noa_control3; - /* 0x031c AFE_DFX_NOA_CTRL4 */ - u32 afe_dfx_noa_control4; - /* 0x0320 AFE_DFX_NOA_CTRL5 */ - u32 afe_dfx_noa_control5; - /* 0x0324 AFE_DFX_NOA_CTRL6 */ - u32 afe_dfx_noa_control6; - /* 0x0328 AFE_DFX_NOA_CTRL7 */ - u32 afe_dfx_noa_control7; - /* 0x032c-0x07fc */ - u32 reserved_032c_07fc[0x135]; - - /* 0x0800-0x0bfc */ - struct scu_afe_transceiver scu_afe_xcvr[4]; - - /* 0x0c00-0x0ffc */ - u32 reserved_0c00_0ffc[0x0100]; -}; - -struct scu_protocol_engine_group_registers { - u32 table[0xE0]; -}; - - -struct scu_viit_iit { - u32 table[256]; -}; - -/** - * Placeholder for the ZONE Partition Table information ZONING will not be - * included in the 1.1 release. - * - * - */ -struct scu_zone_partition_table { - u32 table[2048]; -}; - -/** - * Placeholder for the CRAM register since I am not sure if we need to - * read/write to these registers as yet. - * - * - */ -struct scu_completion_ram { - u32 ram[128]; -}; - -/** - * Placeholder for the FBRAM registers since I am not sure if we need to - * read/write to these registers as yet. - * - * - */ -struct scu_frame_buffer_ram { - u32 ram[128]; -}; - -#define scu_scratch_ram_SIZE_IN_DWORDS 256 - -/** - * Placeholder for the scratch RAM registers. - * - * - */ -struct scu_scratch_ram { - u32 ram[scu_scratch_ram_SIZE_IN_DWORDS]; -}; - -/** - * Placeholder since I am not yet sure what these registers are here for. - * - * - */ -struct noa_protocol_engine_partition { - u32 reserved[64]; -}; - -/** - * Placeholder since I am not yet sure what these registers are here for. - * - * - */ -struct noa_hub_partition { - u32 reserved[64]; -}; - -/** - * Placeholder since I am not yet sure what these registers are here for. - * - * - */ -struct noa_host_interface_partition { - u32 reserved[64]; -}; - -/** - * struct transport_link_layer_pair - The SCU Hardware pairs up the TL - * registers with the LL registers so we must place them adjcent to make the - * array of registers in the PEG. - * - * - */ -struct transport_link_layer_pair { - struct scu_transport_layer_registers tl; - struct scu_link_layer_registers ll; -}; - -/** - * struct scu_peg_registers - SCU Protocol Engine Memory mapped register space. - * These registers are unique to each protocol engine group. There can be - * at most two PEG for a single SCU part. - * - * - */ -struct scu_peg_registers { - struct transport_link_layer_pair pe[4]; - struct scu_port_task_scheduler_group_registers ptsg; - struct scu_protocol_engine_group_registers peg; - struct scu_sgpio_registers sgpio; - u32 reserved_01500_1BFF[0x1C0]; - struct scu_viit_entry viit[64]; - struct scu_zone_partition_table zpt0; - struct scu_zone_partition_table zpt1; -}; - -/** - * struct scu_registers - SCU regsiters including both PEG registers if we turn - * on that compile option. All of these registers are in the memory mapped - * space returned from BAR1. - * - * - */ -struct scu_registers { - /* 0x0000 - PEG 0 */ - struct scu_peg_registers peg0; - - /* 0x6000 - SDMA and Miscellaneous */ - struct scu_sdma_registers sdma; - struct scu_completion_ram cram; - struct scu_frame_buffer_ram fbram; - u32 reserved_6800_69FF[0x80]; - struct noa_protocol_engine_partition noa_pe; - struct noa_hub_partition noa_hub; - struct noa_host_interface_partition noa_if; - u32 reserved_6d00_7fff[0x4c0]; - - /* 0x8000 - PEG 1 */ - struct scu_peg_registers peg1; - - /* 0xE000 - AFE Registers */ - struct scu_afe_registers afe; - - /* 0xF000 - reserved */ - u32 reserved_f000_211fff[0x80c00]; - - /* 0x212000 - scratch RAM */ - struct scu_scratch_ram scratch_ram; -}; - -#endif /* _SCU_REGISTERS_HEADER_ */ diff --git a/drivers/scsi/isci/core/scu_task_context.h b/drivers/scsi/isci/core/scu_task_context.h deleted file mode 100644 index 7df87d9..0000000 --- a/drivers/scsi/isci/core/scu_task_context.h +++ /dev/null @@ -1,942 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCU_TASK_CONTEXT_H_ -#define _SCU_TASK_CONTEXT_H_ - -/** - * This file contains the structures and constants for the SCU hardware task - * context. - * - * - */ - - -/** - * enum scu_ssp_task_type - This enumberation defines the various SSP task - * types the SCU hardware will accept. The definition for the various task - * types the SCU hardware will accept can be found in the DS specification. - * - * - */ -typedef enum { - SCU_TASK_TYPE_IOREAD, /* /< IO READ direction or no direction */ - SCU_TASK_TYPE_IOWRITE, /* /< IO Write direction */ - SCU_TASK_TYPE_SMP_REQUEST, /* /< SMP Request type */ - SCU_TASK_TYPE_RESPONSE, /* /< Driver generated response frame (targt mode) */ - SCU_TASK_TYPE_RAW_FRAME, /* /< Raw frame request type */ - SCU_TASK_TYPE_PRIMITIVE /* /< Request for a primitive to be transmitted */ -} scu_ssp_task_type; - -/** - * enum scu_sata_task_type - This enumeration defines the various SATA task - * types the SCU hardware will accept. The definition for the various task - * types the SCU hardware will accept can be found in the DS specification. - * - * - */ -typedef enum { - SCU_TASK_TYPE_DMA_IN, /* /< Read request */ - SCU_TASK_TYPE_FPDMAQ_READ, /* /< NCQ read request */ - SCU_TASK_TYPE_PACKET_DMA_IN, /* /< Packet read request */ - SCU_TASK_TYPE_SATA_RAW_FRAME, /* /< Raw frame request */ - RESERVED_4, - RESERVED_5, - RESERVED_6, - RESERVED_7, - SCU_TASK_TYPE_DMA_OUT, /* /< Write request */ - SCU_TASK_TYPE_FPDMAQ_WRITE, /* /< NCQ write Request */ - SCU_TASK_TYPE_PACKET_DMA_OUT /* /< Packet write request */ -} scu_sata_task_type; - - -/** - * - * - * SCU_CONTEXT_TYPE - */ -#define SCU_TASK_CONTEXT_TYPE 0 -#define SCU_RNC_CONTEXT_TYPE 1 - -/** - * - * - * SCU_TASK_CONTEXT_VALIDITY - */ -#define SCU_TASK_CONTEXT_INVALID 0 -#define SCU_TASK_CONTEXT_VALID 1 - -/** - * - * - * SCU_COMMAND_CODE - */ -#define SCU_COMMAND_CODE_INITIATOR_NEW_TASK 0 -#define SCU_COMMAND_CODE_ACTIVE_TASK 1 -#define SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK 2 -#define SCU_COMMAND_CODE_TARGET_RAW_FRAMES 3 - -/** - * - * - * SCU_TASK_PRIORITY - */ -/** - * - * - * This priority is used when there is no priority request for this request. - */ -#define SCU_TASK_PRIORITY_NORMAL 0 - -/** - * - * - * This priority indicates that the task should be scheduled to the head of the - * queue. The task will NOT be executed if the TX is suspended for the remote - * node. - */ -#define SCU_TASK_PRIORITY_HEAD_OF_Q 1 - -/** - * - * - * This priority indicates that the task will be executed before all - * SCU_TASK_PRIORITY_NORMAL and SCU_TASK_PRIORITY_HEAD_OF_Q tasks. The task - * WILL be executed if the TX is suspended for the remote node. - */ -#define SCU_TASK_PRIORITY_HIGH 2 - -/** - * - * - * This task priority is reserved and should not be used. - */ -#define SCU_TASK_PRIORITY_RESERVED 3 - -#define SCU_TASK_INITIATOR_MODE 1 -#define SCU_TASK_TARGET_MODE 0 - -#define SCU_TASK_REGULAR 0 -#define SCU_TASK_ABORTED 1 - -/* direction bit defintion */ -/** - * - * - * SATA_DIRECTION - */ -#define SCU_SATA_WRITE_DATA_DIRECTION 0 -#define SCU_SATA_READ_DATA_DIRECTION 1 - -/** - * - * - * SCU_COMMAND_CONTEXT_MACROS These macros provide the mask and shift - * operations to construct the various SCU commands - */ -#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT 21 -#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK 0x00E00000 -#define scu_get_command_request_type(x) \ - ((x) & SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK) - -#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT 18 -#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK 0x001C0000 -#define scu_get_command_request_subtype(x) \ - ((x) & SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK) - -#define SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK \ - (\ - SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK \ - | SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK \ - ) -#define scu_get_command_request_full_type(x) \ - ((x) & SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK) - -#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 16 -#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK 0x00010000 -#define scu_get_command_protocl_engine_group(x) \ - ((x) & SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK) - -#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 12 -#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK 0x00007000 -#define scu_get_command_reqeust_logical_port(x) \ - ((x) & SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK) - - -#define MAKE_SCU_CONTEXT_COMMAND_TYPE(type) \ - ((u32)(type) << SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT) - -/** - * MAKE_SCU_CONTEXT_COMMAND_TYPE() - - * - * SCU_COMMAND_TYPES These constants provide the grouping of the different SCU - * command types. - */ -#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(0) -#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(1) -#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(2) -#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(3) -#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(6) - -#define MAKE_SCU_CONTEXT_COMMAND_REQUEST(type, command) \ - ((type) | ((command) << SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT)) - -/** - * - * - * SCU_REQUEST_TYPES These constants are the various request types that can be - * posted to the SCU hardware. - */ -#define SCU_CONTEXT_COMMAND_REQUST_POST_TC \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 0)) - -#define SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 1)) - -#define SCU_CONTEXT_COMMAND_REQUST_DUMP_TC \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC, 0)) - -#define SCU_CONTEXT_COMMAND_POST_RNC_32 \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 0)) - -#define SCU_CONTEXT_COMMAND_POST_RNC_96 \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 1)) - -#define SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 2)) - -#define SCU_CONTEXT_COMMAND_DUMP_RNC_32 \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 0)) - -#define SCU_CONTEXT_COMMAND_DUMP_RNC_96 \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 1)) - -#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 0)) - -#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 1)) - -#define SCU_CONTEXT_COMMAND_POST_RNC_RESUME \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 2)) - -#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_ENABLE \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 3)) - -#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_DISABLE \ - (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 4)) - -/** - * - * - * SCU_TASK_CONTEXT_PROTOCOL SCU Task context protocol types this is uesd to - * program the SCU Task context protocol field in word 0x00. - */ -#define SCU_TASK_CONTEXT_PROTOCOL_SMP 0x00 -#define SCU_TASK_CONTEXT_PROTOCOL_SSP 0x01 -#define SCU_TASK_CONTEXT_PROTOCOL_STP 0x02 -#define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07 - -/** - * struct ssp_task_context - This is the SCU hardware definition for an SSP - * request. - * - * - */ -struct ssp_task_context { - /* OFFSET 0x18 */ - u32 reserved00:24; - u32 frame_type:8; - - /* OFFSET 0x1C */ - u32 reserved01; - - /* OFFSET 0x20 */ - u32 fill_bytes:2; - u32 reserved02:6; - u32 changing_data_pointer:1; - u32 retransmit:1; - u32 retry_data_frame:1; - u32 tlr_control:2; - u32 reserved03:19; - - /* OFFSET 0x24 */ - u32 uiRsvd4; - - /* OFFSET 0x28 */ - u32 target_port_transfer_tag:16; - u32 tag:16; - - /* OFFSET 0x2C */ - u32 data_offset; -}; - -/** - * struct stp_task_context - This is the SCU hardware definition for an STP - * request. - * - * - */ -struct stp_task_context { - /* OFFSET 0x18 */ - u32 fis_type:8; - u32 pm_port:4; - u32 reserved0:3; - u32 control:1; - u32 command:8; - u32 features:8; - - /* OFFSET 0x1C */ - u32 reserved1; - - /* OFFSET 0x20 */ - u32 reserved2; - - /* OFFSET 0x24 */ - u32 reserved3; - - /* OFFSET 0x28 */ - u32 ncq_tag:5; - u32 reserved4:27; - - /* OFFSET 0x2C */ - u32 data_offset; /* TODO: What is this used for? */ -}; - -/** - * struct smp_task_context - This is the SCU hardware definition for an SMP - * request. - * - * - */ -struct smp_task_context { - /* OFFSET 0x18 */ - u32 response_length:8; - u32 function_result:8; - u32 function:8; - u32 frame_type:8; - - /* OFFSET 0x1C */ - u32 smp_response_ufi:12; - u32 reserved1:20; - - /* OFFSET 0x20 */ - u32 reserved2; - - /* OFFSET 0x24 */ - u32 reserved3; - - /* OFFSET 0x28 */ - u32 reserved4; - - /* OFFSET 0x2C */ - u32 reserved5; -}; - -/** - * struct primitive_task_context - This is the SCU hardware definition used - * when the driver wants to send a primitive on the link. - * - * - */ -struct primitive_task_context { - /* OFFSET 0x18 */ - /** - * This field is the control word and it must be 0. - */ - u32 control; /* /< must be set to 0 */ - - /* OFFSET 0x1C */ - /** - * This field specifies the primitive that is to be transmitted. - */ - u32 sequence; - - /* OFFSET 0x20 */ - u32 reserved0; - - /* OFFSET 0x24 */ - u32 reserved1; - - /* OFFSET 0x28 */ - u32 reserved2; - - /* OFFSET 0x2C */ - u32 reserved3; -}; - -/** - * The union of the protocols that can be selected in the SCU task context - * field. - * - * protocol_context - */ -union protocol_context { - struct ssp_task_context ssp; - struct stp_task_context stp; - struct smp_task_context smp; - struct primitive_task_context primitive; - u32 words[6]; -}; - -/** - * struct scu_sgl_element - This structure represents a single SCU defined SGL - * element. SCU SGLs contain a 64 bit address with the maximum data transfer - * being 24 bits in size. The SGL can not cross a 4GB boundary. - * - * struct scu_sgl_element - */ -struct scu_sgl_element { - /** - * This field is the upper 32 bits of the 64 bit physical address. - */ - u32 address_upper; - - /** - * This field is the lower 32 bits of the 64 bit physical address. - */ - u32 address_lower; - - /** - * This field is the number of bytes to transfer. - */ - u32 length:24; - - /** - * This field is the address modifier to be used when a virtual function is - * requesting a data transfer. - */ - u32 address_modifier:8; - -}; - -#define SCU_SGL_ELEMENT_PAIR_A 0 -#define SCU_SGL_ELEMENT_PAIR_B 1 - -/** - * struct scu_sgl_element_pair - This structure is the SCU hardware definition - * of a pair of SGL elements. The SCU hardware always works on SGL pairs. - * They are refered to in the DS specification as SGL A and SGL B. Each SGL - * pair is followed by the address of the next pair. - * - * - */ -struct scu_sgl_element_pair { - /* OFFSET 0x60-0x68 */ - /** - * This field is the SGL element A of the SGL pair. - */ - struct scu_sgl_element A; - - /* OFFSET 0x6C-0x74 */ - /** - * This field is the SGL element B of the SGL pair. - */ - struct scu_sgl_element B; - - /* OFFSET 0x78-0x7C */ - /** - * This field is the upper 32 bits of the 64 bit address to the next SGL - * element pair. - */ - u32 next_pair_upper; - - /** - * This field is the lower 32 bits of the 64 bit address to the next SGL - * element pair. - */ - u32 next_pair_lower; - -}; - -/** - * struct transport_snapshot - This structure is the SCU hardware scratch area - * for the task context. This is set to 0 by the driver but can be read by - * issuing a dump TC request to the SCU. - * - * - */ -struct transport_snapshot { - /* OFFSET 0x48 */ - u32 xfer_rdy_write_data_length; - - /* OFFSET 0x4C */ - u32 data_offset; - - /* OFFSET 0x50 */ - u32 data_transfer_size:24; - u32 reserved_50_0:8; - - /* OFFSET 0x54 */ - u32 next_initiator_write_data_offset; - - /* OFFSET 0x58 */ - u32 next_initiator_write_data_xfer_size:24; - u32 reserved_58_0:8; -}; - -/** - * struct scu_task_context - This structure defines the contents of the SCU - * silicon task context. It lays out all of the fields according to the - * expected order and location for the Storage Controller unit. - * - * - */ -struct scu_task_context { - /* OFFSET 0x00 ------ */ - /** - * This field must be encoded to one of the valid SCU task priority values - * - SCU_TASK_PRIORITY_NORMAL - * - SCU_TASK_PRIORITY_HEAD_OF_Q - * - SCU_TASK_PRIORITY_HIGH - */ - u32 priority:2; - - /** - * This field must be set to true if this is an initiator generated request. - * Until target mode is supported all task requests are initiator requests. - */ - u32 initiator_request:1; - - /** - * This field must be set to one of the valid connection rates valid values - * are 0x8, 0x9, and 0xA. - */ - u32 connection_rate:4; - - /** - * This field muse be programed when generating an SMP response since the SMP - * connection remains open until the SMP response is generated. - */ - u32 protocol_engine_index:3; - - /** - * This field must contain the logical port for the task request. - */ - u32 logical_port_index:3; - - /** - * This field must be set to one of the SCU_TASK_CONTEXT_PROTOCOL values - * - SCU_TASK_CONTEXT_PROTOCOL_SMP - * - SCU_TASK_CONTEXT_PROTOCOL_SSP - * - SCU_TASK_CONTEXT_PROTOCOL_STP - * - SCU_TASK_CONTEXT_PROTOCOL_NONE - */ - u32 protocol_type:3; - - /** - * This filed must be set to the TCi allocated for this task - */ - u32 task_index:12; - - /** - * This field is reserved and must be set to 0x00 - */ - u32 reserved_00_0:1; - - /** - * For a normal task request this must be set to 0. If this is an abort of - * this task request it must be set to 1. - */ - u32 abort:1; - - /** - * This field must be set to true for the SCU hardware to process the task. - */ - u32 valid:1; - - /** - * This field must be set to SCU_TASK_CONTEXT_TYPE - */ - u32 context_type:1; - - /* OFFSET 0x04 */ - /** - * This field contains the RNi that is the target of this request. - */ - u32 remote_node_index:12; - - /** - * This field is programmed if this is a mirrored request, which we are not - * using, in which case it is the RNi for the mirrored target. - */ - u32 mirrored_node_index:12; - - /** - * This field is programmed with the direction of the SATA reqeust - * - SCU_SATA_WRITE_DATA_DIRECTION - * - SCU_SATA_READ_DATA_DIRECTION - */ - u32 sata_direction:1; - - /** - * This field is programmsed with one of the following SCU_COMMAND_CODE - * - SCU_COMMAND_CODE_INITIATOR_NEW_TASK - * - SCU_COMMAND_CODE_ACTIVE_TASK - * - SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK - * - SCU_COMMAND_CODE_TARGET_RAW_FRAMES - */ - u32 command_code:2; - - /** - * This field is set to true if the remote node should be suspended. - * This bit is only valid for SSP & SMP target devices. - */ - u32 suspend_node:1; - - /** - * This field is programmed with one of the following command type codes - * - * For SAS requests use the scu_ssp_task_type - * - SCU_TASK_TYPE_IOREAD - * - SCU_TASK_TYPE_IOWRITE - * - SCU_TASK_TYPE_SMP_REQUEST - * - SCU_TASK_TYPE_RESPONSE - * - SCU_TASK_TYPE_RAW_FRAME - * - SCU_TASK_TYPE_PRIMITIVE - * - * For SATA requests use the scu_sata_task_type - * - SCU_TASK_TYPE_DMA_IN - * - SCU_TASK_TYPE_FPDMAQ_READ - * - SCU_TASK_TYPE_PACKET_DMA_IN - * - SCU_TASK_TYPE_SATA_RAW_FRAME - * - SCU_TASK_TYPE_DMA_OUT - * - SCU_TASK_TYPE_FPDMAQ_WRITE - * - SCU_TASK_TYPE_PACKET_DMA_OUT - */ - u32 task_type:4; - - /* OFFSET 0x08 */ - /** - * This field is reserved and the must be set to 0x00 - */ - u32 link_layer_control:8; /* presently all reserved */ - - /** - * This field is set to true when TLR is to be enabled - */ - u32 ssp_tlr_enable:1; - - /** - * This is field specifies if the SCU DMAs a response frame to host - * memory for good response frames when operating in target mode. - */ - u32 dma_ssp_target_good_response:1; - - /** - * This field indicates if the SCU should DMA the response frame to - * host memory. - */ - u32 do_not_dma_ssp_good_response:1; - - /** - * This field is set to true when strict ordering is to be enabled - */ - u32 strict_ordering:1; - - /** - * This field indicates the type of endianess to be utilized for the - * frame. command, task, and response frames utilized control_frame - * set to 1. - */ - u32 control_frame:1; - - /** - * This field is reserved and the driver should set to 0x00 - */ - u32 tl_control_reserved:3; - - /** - * This field is set to true when the SCU hardware task timeout control is to - * be enabled - */ - u32 timeout_enable:1; - - /** - * This field is reserved and the driver should set it to 0x00 - */ - u32 pts_control_reserved:7; - - /** - * This field should be set to true when block guard is to be enabled - */ - u32 block_guard_enable:1; - - /** - * This field is reserved and the driver should set to 0x00 - */ - u32 sdma_control_reserved:7; - - /* OFFSET 0x0C */ - /** - * This field is the address modifier for this io request it should be - * programmed with the virtual function that is making the request. - */ - u32 address_modifier:16; - - /** - * @todo What we support mirrored SMP response frame? - */ - u32 mirrored_protocol_engine:3; /* mirrored protocol Engine Index */ - - /** - * If this is a mirrored request the logical port index for the mirrored RNi - * must be programmed. - */ - u32 mirrored_logical_port:4; /* mirrored local port index */ - - /** - * This field is reserved and the driver must set it to 0x00 - */ - u32 reserved_0C_0:8; - - /** - * This field must be set to true if the mirrored request processing is to be - * enabled. - */ - u32 mirror_request_enable:1; /* Mirrored request Enable */ - - /* OFFSET 0x10 */ - /** - * This field is the command iu length in dwords - */ - u32 ssp_command_iu_length:8; - - /** - * This is the target TLR enable bit it must be set to 0 when creatning the - * task context. - */ - u32 xfer_ready_tlr_enable:1; - - /** - * This field is reserved and the driver must set it to 0x00 - */ - u32 reserved_10_0:7; - - /** - * This is the maximum burst size that the SCU hardware will send in one - * connection its value is (N x 512) and N must be a multiple of 2. If the - * value is 0x00 then maximum burst size is disabled. - */ - u32 ssp_max_burst_size:16; - - /* OFFSET 0x14 */ - /** - * This filed is set to the number of bytes to be transfered in the request. - */ - u32 transfer_length_bytes:24; /* In terms of bytes */ - - /** - * This field is reserved and the driver should set it to 0x00 - */ - u32 reserved_14_0:8; - - /* OFFSET 0x18-0x2C */ - /** - * This union provides for the protocol specif part of the SCU Task Context. - */ - union protocol_context type; - - /* OFFSET 0x30-0x34 */ - /** - * This field is the upper 32 bits of the 64 bit physical address of the - * command iu buffer - */ - u32 command_iu_upper; - - /** - * This field is the lower 32 bits of the 64 bit physical address of the - * command iu buffer - */ - u32 command_iu_lower; - - /* OFFSET 0x38-0x3C */ - /** - * This field is the upper 32 bits of the 64 bit physical address of the - * response iu buffer - */ - u32 response_iu_upper; - - /** - * This field is the lower 32 bits of the 64 bit physical address of the - * response iu buffer - */ - u32 response_iu_lower; - - /* OFFSET 0x40 */ - /** - * This field is set to the task phase of the SCU hardware. The driver must - * set this to 0x01 - */ - u32 task_phase:8; - - /** - * This field is set to the transport layer task status. The driver must set - * this to 0x00 - */ - u32 task_status:8; - - /** - * This field is used during initiator write TLR - */ - u32 previous_extended_tag:4; - - /** - * This field is set the maximum number of retries for a STP non-data FIS - */ - u32 stp_retry_count:2; - - /** - * This field is reserved and the driver must set it to 0x00 - */ - u32 reserved_40_1:2; - - /** - * This field is used by the SCU TL to determine when to take a snapshot when - * tranmitting read data frames. - * - 0x00 The entire IO - * - 0x01 32k - * - 0x02 64k - * - 0x04 128k - * - 0x08 256k - */ - u32 ssp_tlr_threshold:4; - - /** - * This field is reserved and the driver must set it to 0x00 - */ - u32 reserved_40_2:4; - - /* OFFSET 0x44 */ - u32 write_data_length; /* read only set to 0 */ - - /* OFFSET 0x48-0x58 */ - struct transport_snapshot snapshot; /* read only set to 0 */ - - /* OFFSET 0x5C */ - u32 block_protection_enable:1; - u32 block_size:2; - u32 block_protection_function:2; - u32 reserved_5C_0:9; - u32 active_sgl_element:2; /* read only set to 0 */ - u32 sgl_exhausted:1; /* read only set to 0 */ - u32 payload_data_transfer_error:4; /* read only set to 0 */ - u32 frame_buffer_offset:11; /* read only set to 0 */ - - /* OFFSET 0x60-0x7C */ - /** - * This field is the first SGL element pair found in the TC data structure. - */ - struct scu_sgl_element_pair sgl_pair_ab; - /* OFFSET 0x80-0x9C */ - /** - * This field is the second SGL element pair found in the TC data structure. - */ - struct scu_sgl_element_pair sgl_pair_cd; - - /* OFFSET 0xA0-BC */ - struct scu_sgl_element_pair sgl_snapshot_ac; - - /* OFFSET 0xC0 */ - u32 active_sgl_element_pair; /* read only set to 0 */ - - /* OFFSET 0xC4-0xCC */ - u32 reserved_C4_CC[3]; - - /* OFFSET 0xD0 */ - u32 intermediate_crc_value:16; - u32 initial_crc_seed:16; - - /* OFFSET 0xD4 */ - u32 application_tag_for_verify:16; - u32 application_tag_for_generate:16; - - /* OFFSET 0xD8 */ - u32 reference_tag_seed_for_verify_function; - - /* OFFSET 0xDC */ - u32 reserved_DC; - - /* OFFSET 0xE0 */ - u32 reserved_E0_0:16; - u32 application_tag_mask_for_generate:16; - - /* OFFSET 0xE4 */ - u32 block_protection_control:16; - u32 application_tag_mask_for_verify:16; - - /* OFFSET 0xE8 */ - u32 block_protection_error:8; - u32 reserved_E8_0:24; - - /* OFFSET 0xEC */ - u32 reference_tag_seed_for_verify; - - /* OFFSET 0xF0 */ - u32 intermediate_crc_valid_snapshot:16; - u32 reserved_F0_0:16; - - /* OFFSET 0xF4 */ - u32 reference_tag_seed_for_verify_function_snapshot; - - /* OFFSET 0xF8 */ - u32 snapshot_of_reserved_dword_DC_of_tc; - - /* OFFSET 0xFC */ - u32 reference_tag_seed_for_generate_function_snapshot; - -}; - -#endif /* _SCU_TASK_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/core/scu_unsolicited_frame.h b/drivers/scsi/isci/core/scu_unsolicited_frame.h deleted file mode 100644 index 187c4f0..0000000 --- a/drivers/scsi/isci/core/scu_unsolicited_frame.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This field defines the SCU format of an unsolicited frame (UF). A UF is a - * frame received by the SCU for which there is no known corresponding task - * context (TC). - * - * - */ - -#ifndef _SCU_UNSOLICITED_FRAME_H_ -#define _SCU_UNSOLICITED_FRAME_H_ - -#include - -/** - * - * - * This constant defines the number of DWORDS found the unsolicited frame - * header data member. - */ -#define SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS 15 - -/** - * struct scu_unsolicited_frame_header - - * - * This structure delineates the format of an unsolicited frame header. The - * first DWORD are UF attributes defined by the silicon architecture. The data - * depicts actual header information received on the link. - */ -struct scu_unsolicited_frame_header { - /** - * This field indicates if there is an Initiator Index Table entry with - * which this header is associated. - */ - u32 iit_exists:1; - - /** - * This field simply indicates the protocol type (i.e. SSP, STP, SMP). - */ - u32 protocol_type:3; - - /** - * This field indicates if the frame is an address frame (IAF or OAF) - * or if it is a information unit frame. - */ - u32 is_address_frame:1; - - /** - * This field simply indicates the connection rate at which the frame - * was received. - */ - u32 connection_rate:4; - - u32 reserved:23; - - /** - * This field represents the actual header data received on the link. - */ - u32 data[SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS]; - -}; - -#endif /* _SCU_UNSOLICITED_FRAME_H_ */ diff --git a/drivers/scsi/isci/core/scu_viit_data.h b/drivers/scsi/isci/core/scu_viit_data.h deleted file mode 100644 index c959d91..0000000 --- a/drivers/scsi/isci/core/scu_viit_data.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCU_VIIT_DATA_HEADER_ -#define _SCU_VIIT_DATA_HEADER_ - -/** - * This file contains the constants and structures for the SCU hardware VIIT - * table entries. - * - * - */ - - -#define SCU_VIIT_ENTRY_ID_MASK (0xC0000000) -#define SCU_VIIT_ENTRY_ID_SHIFT (30) - -#define SCU_VIIT_ENTRY_FUNCTION_MASK (0x0FF00000) -#define SCU_VIIT_ENTRY_FUNCTION_SHIFT (20) - -#define SCU_VIIT_ENTRY_IPPTMODE_MASK (0x0001F800) -#define SCU_VIIT_ENTRY_IPPTMODE_SHIFT (12) - -#define SCU_VIIT_ENTRY_LPVIE_MASK (0x00000F00) -#define SCU_VIIT_ENTRY_LPVIE_SHIFT (8) - -#define SCU_VIIT_ENTRY_STATUS_MASK (0x000000FF) -#define SCU_VIIT_ENTRY_STATUS_SHIFT (0) - -#define SCU_VIIT_ENTRY_ID_INVALID (0 << SCU_VIIT_ENTRY_ID_SHIFT) -#define SCU_VIIT_ENTRY_ID_VIIT (1 << SCU_VIIT_ENTRY_ID_SHIFT) -#define SCU_VIIT_ENTRY_ID_IIT (2 << SCU_VIIT_ENTRY_ID_SHIFT) -#define SCU_VIIT_ENTRY_ID_VIRT_EXP (3 << SCU_VIIT_ENTRY_ID_SHIFT) - -#define SCU_VIIT_IPPT_SSP_INITIATOR (0x01 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) -#define SCU_VIIT_IPPT_SMP_INITIATOR (0x02 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) -#define SCU_VIIT_IPPT_STP_INITIATOR (0x04 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) -#define SCU_VIIT_IPPT_INITIATOR \ - (\ - SCU_VIIT_IPPT_SSP_INITIATOR \ - | SCU_VIIT_IPPT_SMP_INITIATOR \ - | SCU_VIIT_IPPT_STP_INITIATOR \ - ) - -#define SCU_VIIT_STATUS_RNC_VALID (0x01 << SCU_VIIT_ENTRY_STATUS_SHIFT) -#define SCU_VIIT_STATUS_ADDRESS_VALID (0x02 << SCU_VIIT_ENTRY_STATUS_SHIFT) -#define SCU_VIIT_STATUS_RNI_VALID (0x04 << SCU_VIIT_ENTRY_STATUS_SHIFT) -#define SCU_VIIT_STATUS_ALL_VALID \ - (\ - SCU_VIIT_STATUS_RNC_VALID \ - | SCU_VIIT_STATUS_ADDRESS_VALID \ - | SCU_VIIT_STATUS_RNI_VALID \ - ) - -#define SCU_VIIT_IPPT_SMP_TARGET (0x10 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) - -/** - * struct scu_viit_entry - This is the SCU Virtual Initiator Table Entry - * - * - */ -struct scu_viit_entry { - /** - * This must be encoded as to the type of initiator that is being constructed - * for this port. - */ - u32 status; - - /** - * Virtual initiator high SAS Address - */ - u32 initiator_sas_address_hi; - - /** - * Virtual initiator low SAS Address - */ - u32 initiator_sas_address_lo; - - /** - * This must be 0 - */ - u32 reserved; - -}; - - -/* IIT Status Defines */ -#define SCU_IIT_ENTRY_ID_MASK (0xC0000000) -#define SCU_IIT_ENTRY_ID_SHIFT (30) - -#define SCU_IIT_ENTRY_STATUS_UPDATE_MASK (0x20000000) -#define SCU_IIT_ENTRY_STATUS_UPDATE_SHIFT (29) - -#define SCU_IIT_ENTRY_LPI_MASK (0x00000F00) -#define SCU_IIT_ENTRY_LPI_SHIFT (8) - -#define SCU_IIT_ENTRY_STATUS_MASK (0x000000FF) -#define SCU_IIT_ENTRY_STATUS_SHIFT (0) - -/* IIT Remote Initiator Defines */ -#define SCU_IIT_ENTRY_REMOTE_TAG_MASK (0x0000FFFF) -#define SCU_IIT_ENTRY_REMOTE_TAG_SHIFT (0) - -#define SCU_IIT_ENTRY_REMOTE_RNC_MASK (0x0FFF0000) -#define SCU_IIT_ENTRY_REMOTE_RNC_SHIFT (16) - -#define SCU_IIT_ENTRY_ID_INVALID (0 << SCU_IIT_ENTRY_ID_SHIFT) -#define SCU_IIT_ENTRY_ID_VIIT (1 << SCU_IIT_ENTRY_ID_SHIFT) -#define SCU_IIT_ENTRY_ID_IIT (2 << SCU_IIT_ENTRY_ID_SHIFT) -#define SCU_IIT_ENTRY_ID_VIRT_EXP (3 << SCU_IIT_ENTRY_ID_SHIFT) - -/** - * struct scu_iit_entry - This will be implemented later when we support - * virtual functions - * - * - */ -struct scu_iit_entry { - u32 status; - u32 remote_initiator_sas_address_hi; - u32 remote_initiator_sas_address_lo; - u32 remote_initiator; - -}; - -#endif /* _SCU_VIIT_DATA_HEADER_ */ diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 43a5d7a..71a0466 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -66,7 +66,7 @@ #include "sci_util.h" #include "scu_completion_codes.h" #include "scu_event_codes.h" -#include "scu_registers.h" +#include "registers.h" #include "scu_remote_node_context.h" #include "scu_task_context.h" #include "scu_unsolicited_frame.h" diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 1f542c4..64edac8 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -61,9 +61,9 @@ #include "pool.h" #include "sci_base_state_machine.h" #include "remote_node_table.h" -#include "scu_registers.h" +#include "registers.h" #include "scu_unsolicited_frame.h" -#include "scic_sds_unsolicited_frame_control.h" +#include "unsolicited_frame_control.h" #include "scic_sds_port_configuration_agent.h" struct scic_sds_request; diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h new file mode 100644 index 0000000..9b266c7 --- /dev/null +++ b/drivers/scsi/isci/registers.h @@ -0,0 +1,1934 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_REGISTERS_H_ +#define _SCU_REGISTERS_H_ + +/** + * This file contains the constants and structures for the SCU memory mapped + * registers. + * + * + */ + +#define SCU_VIIT_ENTRY_ID_MASK (0xC0000000) +#define SCU_VIIT_ENTRY_ID_SHIFT (30) + +#define SCU_VIIT_ENTRY_FUNCTION_MASK (0x0FF00000) +#define SCU_VIIT_ENTRY_FUNCTION_SHIFT (20) + +#define SCU_VIIT_ENTRY_IPPTMODE_MASK (0x0001F800) +#define SCU_VIIT_ENTRY_IPPTMODE_SHIFT (12) + +#define SCU_VIIT_ENTRY_LPVIE_MASK (0x00000F00) +#define SCU_VIIT_ENTRY_LPVIE_SHIFT (8) + +#define SCU_VIIT_ENTRY_STATUS_MASK (0x000000FF) +#define SCU_VIIT_ENTRY_STATUS_SHIFT (0) + +#define SCU_VIIT_ENTRY_ID_INVALID (0 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_VIIT (1 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_IIT (2 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_VIRT_EXP (3 << SCU_VIIT_ENTRY_ID_SHIFT) + +#define SCU_VIIT_IPPT_SSP_INITIATOR (0x01 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_SMP_INITIATOR (0x02 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_STP_INITIATOR (0x04 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_INITIATOR \ + (\ + SCU_VIIT_IPPT_SSP_INITIATOR \ + | SCU_VIIT_IPPT_SMP_INITIATOR \ + | SCU_VIIT_IPPT_STP_INITIATOR \ + ) + +#define SCU_VIIT_STATUS_RNC_VALID (0x01 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_ADDRESS_VALID (0x02 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_RNI_VALID (0x04 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_ALL_VALID \ + (\ + SCU_VIIT_STATUS_RNC_VALID \ + | SCU_VIIT_STATUS_ADDRESS_VALID \ + | SCU_VIIT_STATUS_RNI_VALID \ + ) + +#define SCU_VIIT_IPPT_SMP_TARGET (0x10 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) + +/** + * struct scu_viit_entry - This is the SCU Virtual Initiator Table Entry + * + * + */ +struct scu_viit_entry { + /** + * This must be encoded as to the type of initiator that is being constructed + * for this port. + */ + u32 status; + + /** + * Virtual initiator high SAS Address + */ + u32 initiator_sas_address_hi; + + /** + * Virtual initiator low SAS Address + */ + u32 initiator_sas_address_lo; + + /** + * This must be 0 + */ + u32 reserved; + +}; + + +/* IIT Status Defines */ +#define SCU_IIT_ENTRY_ID_MASK (0xC0000000) +#define SCU_IIT_ENTRY_ID_SHIFT (30) + +#define SCU_IIT_ENTRY_STATUS_UPDATE_MASK (0x20000000) +#define SCU_IIT_ENTRY_STATUS_UPDATE_SHIFT (29) + +#define SCU_IIT_ENTRY_LPI_MASK (0x00000F00) +#define SCU_IIT_ENTRY_LPI_SHIFT (8) + +#define SCU_IIT_ENTRY_STATUS_MASK (0x000000FF) +#define SCU_IIT_ENTRY_STATUS_SHIFT (0) + +/* IIT Remote Initiator Defines */ +#define SCU_IIT_ENTRY_REMOTE_TAG_MASK (0x0000FFFF) +#define SCU_IIT_ENTRY_REMOTE_TAG_SHIFT (0) + +#define SCU_IIT_ENTRY_REMOTE_RNC_MASK (0x0FFF0000) +#define SCU_IIT_ENTRY_REMOTE_RNC_SHIFT (16) + +#define SCU_IIT_ENTRY_ID_INVALID (0 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_VIIT (1 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_IIT (2 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_VIRT_EXP (3 << SCU_IIT_ENTRY_ID_SHIFT) + +/** + * struct scu_iit_entry - This will be implemented later when we support + * virtual functions + * + * + */ +struct scu_iit_entry { + u32 status; + u32 remote_initiator_sas_address_hi; + u32 remote_initiator_sas_address_lo; + u32 remote_initiator; + +}; + +/* Generate a value for an SCU register */ +#define SCU_GEN_VALUE(name, value) \ + (((value) << name ## _SHIFT) & (name ## _MASK)) + +/* + * Generate a bit value for an SCU register + * Make sure that the register MASK is just a single bit */ +#define SCU_GEN_BIT(name) \ + SCU_GEN_VALUE(name, ((u32)1)) + +#define SCU_SET_BIT(name, reg_value) \ + ((reg_value) | SCU_GEN_BIT(name)) + +#define SCU_CLEAR_BIT(name, reg_value) \ + ((reg_value)$ ~(SCU_GEN_BIT(name))) + +/* + * ***************************************************************************** + * Unions for bitfield definitions of SCU Registers + * SMU Post Context Port + * ***************************************************************************** */ +#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_SHIFT (0) +#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_MASK (0x00000FFF) +#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_SHIFT (12) +#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_MASK (0x0000F000) +#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_SHIFT (16) +#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_MASK (0x00030000) +#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_SHIFT (18) +#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_MASK (0x00FC0000) +#define SMU_POST_CONTEXT_PORT_RESERVED_MASK (0xFF000000) + +#define SMU_PCP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_POST_CONTEXT_PORT_ ## name, value) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_STATUS_COMPLETION_SHIFT (31) +#define SMU_INTERRUPT_STATUS_COMPLETION_MASK (0x80000000) +#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_SHIFT (1) +#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_MASK (0x00000002) +#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_SHIFT (0) +#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_MASK (0x00000001) +#define SMU_INTERRUPT_STATUS_RESERVED_MASK (0x7FFFFFFC) + +#define SMU_ISR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_INTERRUPT_STATUS_ ## name) + +#define SMU_ISR_QUEUE_ERROR SMU_ISR_GEN_BIT(QUEUE_ERROR) +#define SMU_ISR_QUEUE_SUSPEND SMU_ISR_GEN_BIT(QUEUE_SUSPEND) +#define SMU_ISR_COMPLETION SMU_ISR_GEN_BIT(COMPLETION) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_MASK_COMPLETION_SHIFT (31) +#define SMU_INTERRUPT_MASK_COMPLETION_MASK (0x80000000) +#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_SHIFT (1) +#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_MASK (0x00000002) +#define SMU_INTERRUPT_MASK_QUEUE_ERROR_SHIFT (0) +#define SMU_INTERRUPT_MASK_QUEUE_ERROR_MASK (0x00000001) +#define SMU_INTERRUPT_MASK_RESERVED_MASK (0x7FFFFFFC) + +#define SMU_IMR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_INTERRUPT_MASK_ ## name) + +#define SMU_IMR_QUEUE_ERROR SMU_IMR_GEN_BIT(QUEUE_ERROR) +#define SMU_IMR_QUEUE_SUSPEND SMU_IMR_GEN_BIT(QUEUE_SUSPEND) +#define SMU_IMR_COMPLETION SMU_IMR_GEN_BIT(COMPLETION) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_SHIFT (0) +#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_MASK (0x0000001F) +#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_SHIFT (8) +#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_MASK (0x0000FF00) +#define SMU_INTERRUPT_COALESCING_CONTROL_RESERVED_MASK (0xFFFF00E0) + +#define SMU_ICC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_INTERRUPT_COALESCING_CONTROL_ ## name, value) + +/* ***************************************************************************** */ +#define SMU_TASK_CONTEXT_RANGE_START_SHIFT (0) +#define SMU_TASK_CONTEXT_RANGE_START_MASK (0x00000FFF) +#define SMU_TASK_CONTEXT_RANGE_ENDING_SHIFT (16) +#define SMU_TASK_CONTEXT_RANGE_ENDING_MASK (0x0FFF0000) +#define SMU_TASK_CONTEXT_RANGE_ENABLE_SHIFT (31) +#define SMU_TASK_CONTEXT_RANGE_ENABLE_MASK (0x80000000) +#define SMU_TASK_CONTEXT_RANGE_RESERVED_MASK (0x7000F000) + +#define SMU_TCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_TASK_CONTEXT_RANGE_ ## name, value) + +#define SMU_TCR_GEN_BIT(name, value) \ + SCU_GEN_BIT(SMU_TASK_CONTEXT_RANGE_ ## name) + +/* ***************************************************************************** */ + +#define SMU_COMPLETION_QUEUE_PUT_POINTER_SHIFT (0) +#define SMU_COMPLETION_QUEUE_PUT_POINTER_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_SHIFT (15) +#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_MASK (0x00008000) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_SHIFT (16) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_SHIFT (26) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_MASK (0x04000000) +#define SMU_COMPLETION_QUEUE_PUT_RESERVED_MASK (0xF8004000) + +#define SMU_CQPR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_PUT_ ## name, value) + +#define SMU_CQPR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_COMPLETION_QUEUE_PUT_ ## name) + +/* ***************************************************************************** */ + +#define SMU_COMPLETION_QUEUE_GET_POINTER_SHIFT (0) +#define SMU_COMPLETION_QUEUE_GET_POINTER_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT (15) +#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_MASK (0x00008000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT (16) +#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT (26) +#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_MASK (0x04000000) +#define SMU_COMPLETION_QUEUE_GET_ENABLE_SHIFT (30) +#define SMU_COMPLETION_QUEUE_GET_ENABLE_MASK (0x40000000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_SHIFT (31) +#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_MASK (0x80000000) +#define SMU_COMPLETION_QUEUE_GET_RESERVED_MASK (0x38004000) + +#define SMU_CQGR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_GET_ ## name, value) + +#define SMU_CQGR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_COMPLETION_QUEUE_GET_ ## name) + +#define SMU_CQGR_CYCLE_BIT \ + SMU_CQGR_GEN_BIT(CYCLE_BIT) + +#define SMU_CQGR_EVENT_CYCLE_BIT \ + SMU_CQGR_GEN_BIT(EVENT_CYCLE_BIT) + +#define SMU_CQGR_GET_POINTER_SET(value) \ + SMU_CQGR_GEN_VAL(POINTER, value) + + +/* ***************************************************************************** */ +#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_SHIFT (0) +#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_SHIFT (16) +#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_CONTROL_RESERVED_MASK (0xFC00C000) + +#define SMU_CQC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_CONTROL_ ## name, value) + +#define SMU_CQC_QUEUE_LIMIT_SET(value) \ + SMU_CQC_GEN_VAL(QUEUE_LIMIT, value) + +#define SMU_CQC_EVENT_LIMIT_SET(value) \ + SMU_CQC_GEN_VAL(EVENT_LIMIT, value) + + +/* ***************************************************************************** */ +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT (0) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK (0x00000FFF) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT (12) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK (0x00007000) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT (15) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK (0x07FF8000) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_SHIFT (27) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK (0x08000000) +#define SMU_DEVICE_CONTEXT_CAPACITY_RESERVED_MASK (0xF0000000) + +#define SMU_DCC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_DEVICE_CONTEXT_CAPACITY_ ## name, value) + +#define SMU_DCC_GET_MAX_PEG(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_LP(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_TC(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_RNC(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT \ + ) + +/* -------------------------------------------------------------------------- */ + +#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_SHIFT (0) +#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_MASK (0x00000001) +#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_SHIFT (1) +#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_MASK (0x00000002) +#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_SHIFT (16) +#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_MASK (0x00010000) +#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_SHIFT (17) +#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_MASK (0x00020000) +#define SMU_CONTROL_STATUS_RESERVED_MASK (0xFFFCFFFC) + +#define SMU_SMUCSR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_CONTROL_STATUS_ ## name) + +#define SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ + (SMU_SMUCSR_GEN_BIT(SCHEDULER_RAM_INIT_COMPLETED)) + +#define SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ + (SMU_SMUCSR_GEN_BIT(CONTEXT_RAM_INIT_COMPLETED)) + +#define SCU_RAM_INIT_COMPLETED \ + (\ + SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ + | SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ + ) + +/* -------------------------------------------------------------------------- */ + +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_SHIFT (0) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_MASK (0x00000001) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_SHIFT (1) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_MASK (0x00000002) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_SHIFT (2) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_MASK (0x00000004) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_SHIFT (3) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_MASK (0x00000008) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_SHIFT (8) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_MASK (0x00000100) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_SHIFT (9) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_MASK (0x00000200) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_SHIFT (10) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_MASK (0x00000400) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_SHIFT (11) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_MASK (0x00000800) + +#define SMU_RESET_PROTOCOL_ENGINE(peg, pe) \ + ((1 << (pe)) << ((peg) * 8)) + +#define SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ + (\ + SMU_RESET_PROTOCOL_ENGINE(peg, 0) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 1) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 2) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 3) \ + ) + +#define SMU_RESET_ALL_PROTOCOL_ENGINES() \ + (\ + SMU_RESET_PEG_PROTOCOL_ENGINES(0) \ + | SMU_RESET_PEG_PROTOCOL_ENGINES(1) \ + ) + +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_SHIFT (16) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_MASK (0x00010000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_SHIFT (17) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_MASK (0x00020000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_SHIFT (18) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_MASK (0x00040000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_SHIFT (19) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_MASK (0x00080000) + +#define SMU_RESET_WIDE_PORT_QUEUE(peg, wide_port) \ + ((1 << ((wide_port) / 2)) << ((peg) * 2) << 16) + +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_SHIFT (20) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_MASK (0x00100000) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_SHIFT (21) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_MASK (0x00200000) +#define SMU_SOFTRESET_CONTROL_RESET_SCU_SHIFT (22) +#define SMU_SOFTRESET_CONTROL_RESET_SCU_MASK (0x00400000) + +/* + * It seems to make sense that if you are going to reset the protocol + * engine group that you would also reset all of the protocol engines */ +#define SMU_RESET_PROTOCOL_ENGINE_GROUP(peg) \ + (\ + (1 << ((peg) + 20)) \ + | SMU_RESET_WIDE_PORT_QUEUE(peg, 0) \ + | SMU_RESET_WIDE_PORT_QUEUE(peg, 1) \ + | SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ + ) + +#define SMU_RESET_ALL_PROTOCOL_ENGINE_GROUPS() \ + (\ + SMU_RESET_PROTOCOL_ENGINE_GROUP(0) \ + | SMU_RESET_PROTOCOL_ENGINE_GROUP(1) \ + ) + +#define SMU_RESET_SCU() (0xFFFFFFFF) + + + +/* ***************************************************************************** */ +#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_SHIFT (0) +#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_MASK (0x00000FFF) +#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_SHIFT (16) +#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_MASK (0x0FFF0000) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_SHIFT (31) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_MASK (0x80000000) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RESERVED_MASK (0x7000F000) + +#define SMU_TCA_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name, value) + +#define SMU_TCA_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name) + +/* ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_RESERVED_MASK (0xFFFFF000) + +#define SCU_UFQC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_ ## name, value) + +#define SCU_UFQC_QUEUE_SIZE_SET(value) \ + SCU_UFQC_GEN_VAL(QUEUE_SIZE, value) + +/* ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_SHIFT (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_MASK (0x00001000) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_RESERVED_MASK (0xFFFFE000) + +#define SCU_UFQPP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name, value) + +#define SCU_UFQPP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name) + +/* + * ***************************************************************************** + * * SDMA Registers + * ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_SHIFT (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_MASK (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_SHIFT (31) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_MASK (0x80000000) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_RESERVED_MASK (0x7FFFE000) + +#define SCU_UFQGP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name, value) + +#define SCU_UFQGP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name) + +#define SCU_UFQGP_CYCLE_BIT(value) \ + SCU_UFQGP_GEN_BIT(CYCLE_BIT, value) + +#define SCU_UFQGP_GET_POINTER(value) \ + SCU_UFQGP_GEN_VALUE(POINTER, value) + +#define SCU_UFQGP_ENABLE(value) \ + (SCU_UFQGP_GEN_BIT(ENABLE) | value) + +#define SCU_UFQGP_DISABLE(value) \ + (~SCU_UFQGP_GEN_BIT(ENABLE) & value) + +#define SCU_UFQGP_VALUE(bit, value) \ + (SCU_UFQGP_CYCLE_BIT(bit) | SCU_UFQGP_GET_POINTER(value)) + +/* ***************************************************************************** */ +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SHIFT (0) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_MASK (0x0000FFFF) +#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (16) +#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00010000) +#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_SHIFT (17) +#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_MASK (0x00020000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_SHIFT (18) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_MASK (0x00040000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_SHIFT (19) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_MASK (0x00080000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_SHIFT (20) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_MASK (0x00100000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_SHIFT (21) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_MASK (0x00200000) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_SHIFT (22) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_MASK (0x00400000) +#define SCU_PDMA_CONFIGURATION_RESERVED_MASK (0xFF800000) + +#define SCU_PDMACR_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_PDMA_CONFIGURATION_ ## name, value) + +#define SCU_PDMACR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PDMA_CONFIGURATION_ ## name) + +#define SCU_PDMACR_BE_GEN_BIT(name) \ + SCU_PCMACR_GEN_BIT(BIG_ENDIAN_CONTROL_ ## name) + +/* ***************************************************************************** */ +#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (8) +#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00000100) + +#define SCU_CDMACR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_CDMA_CONFIGURATION_ ## name) + +/* + * ***************************************************************************** + * * SCU Link Layer Registers + * ***************************************************************************** */ +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_SHIFT (0) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_MASK (0x000000FF) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_SHIFT (8) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_MASK (0x0000FF00) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_SHIFT (16) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_MASK (0x00FF0000) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_SHIFT (24) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_MASK (0xFF000000) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_REQUIRED_MASK (0x00000000) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_DEFAULT_MASK (0x7D00676F) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_RESERVED_MASK (0x00FF0000) + +#define SCU_SAS_SPDTOV_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_ ## name, value) + + +#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_SHIFT (2) +#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_MASK (0x00000004) +#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_SHIFT (4) +#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_MASK (0x00000010) +#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_SHIFT (5) +#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_MASK (0x00000020) +#define SCU_LINK_STATUS_RESERVED_MASK (0xFFFFFFCD) + +#define SCU_SAS_LLSTA_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_STATUS_ ## name) + + +/* TODO: Where is the SATA_PSELTOV register? */ + +/* + * ***************************************************************************** + * * SCU SAS Maximum Arbitration Wait Time Timeout Register + * ***************************************************************************** */ +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_SHIFT (0) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_MASK (0x00007FFF) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_SHIFT (15) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_MASK (0x00008000) + +#define SCU_SAS_MAWTTOV_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name, value) + +#define SCU_SAS_MAWTTOV_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name) + + +/* + * TODO: Where is the SAS_LNKTOV regsiter? + * TODO: Where is the SAS_PHYTOV register? */ + +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT (1) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_MASK (0x00000002) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_SHIFT (2) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_MASK (0x00000004) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_SHIFT (3) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_MASK (0x00000008) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_SHIFT (8) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_MASK (0x00000100) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_SHIFT (9) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_MASK (0x00000200) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_SHIFT (10) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_MASK (0x00000400) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_SHIFT (11) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_MASK (0x00000800) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_SHIFT (16) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_MASK (0x000F0000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_SHIFT (24) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_MASK (0x0F000000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_SHIFT (28) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_MASK (0x70000000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_RESERVED_MASK (0x80F0F1F1) + +#define SCU_SAS_TIID_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name, value) + +#define SCU_SAS_TIID_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name) + +/* SAS Identify Frame PHY Identifier Register */ +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_SHIFT (16) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_MASK (0x00010000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_SHIFT (17) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_MASK (0x00020000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_SHIFT (18) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_MASK (0x00040000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_SHIFT (24) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_MASK (0xFF000000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_RESERVED_MASK (0x00F800FF) + +#define SCU_SAS_TIPID_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name, value) + +#define SCU_SAS_TIPID_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name) + + +#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_SHIFT (4) +#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_MASK (0x00000010) +#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_SHIFT (6) +#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_MASK (0x00000040) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_SHIFT (7) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_MASK (0x00000080) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_SHIFT (8) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_MASK (0x00000100) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_SHIFT (9) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_MASK (0x00000200) +#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_SHIFT (11) +#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_MASK (0x00000800) +#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_SHIFT (12) +#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_MASK (0x00001000) +#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_SHIFT (13) +#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_MASK (0x00002000) +#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_SHIFT (14) +#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_MASK (0x00004000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_SHIFT (15) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_MASK (0x00008000) +#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_SHIFT (23) +#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_MASK (0x00800000) +#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_SHIFT (27) +#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_MASK (0x08000000) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_SHIFT (28) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_MASK (0x10000000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_SHIFT (29) +#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_MASK (0x20000000) +#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_SHIFT (30) +#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_MASK (0x40000000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_SHIFT (31) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_MASK (0x80000000) +#define SCU_SAS_PHY_CONFIGURATION_REQUIRED_MASK (0x0100000F) +#define SCU_SAS_PHY_CONFIGURATION_DEFAULT_MASK (0x4180100F) +#define SCU_SAS_PHY_CONFIGURATION_RESERVED_MASK (0x00000000) + +#define SCU_SAS_PCFG_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name) + +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_SHIFT (0) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_MASK (0x000007FF) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_SHIFT (16) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_MASK (0x00ff0000) + +#define SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_##name, value) + +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT (0) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK (0x0003FFFF) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_SHIFT (31) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_MASK (0x80000000) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_RESERVED_MASK (0x7FFC0000) + +#define SCU_ENSPINUP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name, value) + +#define SCU_ENSPINUP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name) + + +#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_SHIFT (1) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_MASK (0x00000002) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_SHIFT (4) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_MASK (0x000000F0) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_SHIFT (8) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_MASK (0x00000100) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_SHIFT (9) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_MASK (0x00000201) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_SHIFT (10) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_MASK (0x00000401) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_SHIFT (11) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_MASK (0x00000801) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_SHIFT (12) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_MASK (0x00001001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_SHIFT (13) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_MASK (0x00002001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_SHIFT (31) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_MASK (0x80000000) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_DEFAULT_MASK (0x00003F01) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_REQUIRED_MASK (0x00000001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RESERVED_MASK (0x7FFFC00D) + +#define SCU_SAS_PHYCAP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name, value) + +#define SCU_SAS_PHYCAP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name) + + +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_SHIFT (0) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_MASK (0x000000FF) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_SHIFT (31) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_MASK (0x80000000) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_RESERVED_MASK (0x7FFFFF00) + +#define SCU_PSZGCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name, value) + +#define SCU_PSZGCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name) + +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_SHIFT (1) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_MASK (0x00000002) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_SHIFT (2) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_MASK (0x00000004) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_SHIFT (4) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_MASK (0x00000010) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_SHIFT (5) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_MASK (0x00000020) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_SHIFT (16) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_MASK (0x00030000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_SHIFT (19) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_MASK (0x00080000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_SHIFT (20) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_MASK (0x00300000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_SHIFT (23) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_MASK (0x00800000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_SHIFT (24) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_MASK (0x03000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_SHIFT (27) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_MASK (0x08000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_SHIFT (28) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_MASK (0x30000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_SHIFT (31) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_MASK (0x80000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_RESERVED_MASK (0x4444FFC9) + +#define SCU_PEG_SCUVZECR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name, val) + +#define SCU_PEG_SCUVZECR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name) + + +/* + * ***************************************************************************** + * * Port Task Scheduler registers shift and mask values + * ***************************************************************************** */ +#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_SHIFT (0) +#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_MASK (0x0000FFFF) +#define SCU_PTSG_CONTROL_TASK_TIMEOUT_SHIFT (16) +#define SCU_PTSG_CONTROL_TASK_TIMEOUT_MASK (0x00FF0000) +#define SCU_PTSG_CONTROL_PTSG_ENABLE_SHIFT (24) +#define SCU_PTSG_CONTROL_PTSG_ENABLE_MASK (0x01000000) +#define SCU_PTSG_CONTROL_ETM_ENABLE_SHIFT (25) +#define SCU_PTSG_CONTROL_ETM_ENABLE_MASK (0x02000000) +#define SCU_PTSG_CONTROL_DEFAULT_MASK (0x00020002) +#define SCU_PTSG_CONTROL_REQUIRED_MASK (0x00000000) +#define SCU_PTSG_CONTROL_RESERVED_MASK (0xFC000000) + +#define SCU_PTSGCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_CONTROL_ ## name, val) + +#define SCU_PTSGCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_CONTROL_ ## name) + + +/* ***************************************************************************** */ +#define SCU_PTSG_REAL_TIME_CLOCK_SHIFT (0) +#define SCU_PTSG_REAL_TIME_CLOCK_MASK (0x0000FFFF) +#define SCU_PTSG_REAL_TIME_CLOCK_RESERVED_MASK (0xFFFF0000) + +#define SCU_RTCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_ ## name, val) + + +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_SHIFT (0) +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_MASK (0x00FFFFFF) +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_RESERVED_MASK (0xFF000000) + +#define SCU_RTCCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_REAL_TIME_CLOCK_CONTROL_ ## name, val) + + +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_SHIFT (0) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_MASK (0x00000001) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_SHIFT (1) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_MASK (0x00000002) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_RESERVED_MASK (0xFFFFFFFC) + +#define SCU_PTSxCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ ## name) + + +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_SHIFT (0) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_MASK (0x00000001) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_SHIFT (1) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_MASK (0x00000002) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_SHIFT (2) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_MASK (0x00000004) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_RESERVED_MASK (0xFFFFFFF8) + +#define SCU_PTSxSR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name) + + +/* + * ***************************************************************************** + * * SGPIO Register shift and mask values + * ***************************************************************************** */ +#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT (0) +#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK (0x00000001) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT (1) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK (0x00000002) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK (0x00000004) +#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT (15) +#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK (0x00008000) +#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK (0xFFFF7FF8) + +#define SCU_SGICRx_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name) + +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT (0) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK (0x0000000F) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT (4) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK (0x000000F0) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT (8) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK (0x00000F00) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT (12) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK (0x0000F000) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000) + +#define SCU_SGPBRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value) + +#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT (0) +#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK (0x00000003) +#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT (4) +#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK (0x00000030) +#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT (8) +#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK (0x00000300) +#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT (12) +#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK (0x00003000) +#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSDLRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) + +#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT (0) +#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK (0x00000003) +#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT (4) +#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK (0x00000030) +#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT (8) +#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK (0x00000300) +#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT (12) +#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK (0x00003000) +#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSDURx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) + +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT (0) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK (0x00000003) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT (4) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK (0x00000030) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT (8) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK (0x00000300) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT (12) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK (0x00003000) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSIDLRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) + +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT (0) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK (0x00000003) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT (4) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK (0x00000030) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT (8) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK (0x00000300) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT (12) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK (0x00003000) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSIDURx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) + +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT (0) +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK (0x0000000F) +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK (0xFFFFFFF0) + +#define SCU_SGVSCR_GEN_VAL(value) \ + SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value) + +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT (0) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK (0x00000003) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT (2) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK (0x00000004) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT (3) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK (0x00000008) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT (4) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK (0x00000030) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT (6) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK (0x00000040) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT (7) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK (0x00000080) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT (8) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK (0x00000300) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT (10) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK (0x00000400) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT (11) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK (0x00000800) +#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK (0xFFFFF000) + +#define SCU_SGODSR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value) + +#define SCU_SGODSR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name) + +/* + * ***************************************************************************** + * * SMU Registers + * ***************************************************************************** */ + +/* + * ---------------------------------------------------------------------------- + * SMU Registers + * These registers are based off of BAR0 + * + * To calculate the offset for other functions use + * BAR0 + FN# * SystemPageSize * 2 + * + * The TCA is only accessable from FN#0 (Physical Function) and each + * is programmed by (BAR0 + SCU_SMU_TCA_OFFSET + (FN# * 0x04)) or + * TCA0 for FN#0 is at BAR0 + 0x0400 + * TCA1 for FN#1 is at BAR0 + 0x0404 + * etc. + * ---------------------------------------------------------------------------- + * Accessable to all FN#s */ +#define SCU_SMU_PCP_OFFSET 0x0000 +#define SCU_SMU_AMR_OFFSET 0x0004 +#define SCU_SMU_ISR_OFFSET 0x0010 +#define SCU_SMU_IMR_OFFSET 0x0014 +#define SCU_SMU_ICC_OFFSET 0x0018 +#define SCU_SMU_HTTLBAR_OFFSET 0x0020 +#define SCU_SMU_HTTUBAR_OFFSET 0x0024 +#define SCU_SMU_TCR_OFFSET 0x0028 +#define SCU_SMU_CQLBAR_OFFSET 0x0030 +#define SCU_SMU_CQUBAR_OFFSET 0x0034 +#define SCU_SMU_CQPR_OFFSET 0x0040 +#define SCU_SMU_CQGR_OFFSET 0x0044 +#define SCU_SMU_CQC_OFFSET 0x0048 +/* Accessable to FN#0 only */ +#define SCU_SMU_RNCLBAR_OFFSET 0x0080 +#define SCU_SMU_RNCUBAR_OFFSET 0x0084 +#define SCU_SMU_DCC_OFFSET 0x0090 +#define SCU_SMU_DFC_OFFSET 0x0094 +#define SCU_SMU_SMUCSR_OFFSET 0x0098 +#define SCU_SMU_SCUSRCR_OFFSET 0x009C +#define SCU_SMU_SMAW_OFFSET 0x00A0 +#define SCU_SMU_SMDW_OFFSET 0x00A4 +/* Accessable to FN#0 only */ +#define SCU_SMU_TCA_OFFSET 0x0400 +/* Accessable to all FN#s */ +#define SCU_SMU_MT_MLAR0_OFFSET 0x2000 +#define SCU_SMU_MT_MUAR0_OFFSET 0x2004 +#define SCU_SMU_MT_MDR0_OFFSET 0x2008 +#define SCU_SMU_MT_VCR0_OFFSET 0x200C +#define SCU_SMU_MT_MLAR1_OFFSET 0x2010 +#define SCU_SMU_MT_MUAR1_OFFSET 0x2014 +#define SCU_SMU_MT_MDR1_OFFSET 0x2018 +#define SCU_SMU_MT_VCR1_OFFSET 0x201C +#define SCU_SMU_MPBA_OFFSET 0x3000 + +/** + * struct smu_registers - These are the SMU registers + * + * + */ +struct smu_registers { +/* 0x0000 PCP */ + u32 post_context_port; +/* 0x0004 AMR */ + u32 address_modifier; + u32 reserved_08; + u32 reserved_0C; +/* 0x0010 ISR */ + u32 interrupt_status; +/* 0x0014 IMR */ + u32 interrupt_mask; +/* 0x0018 ICC */ + u32 interrupt_coalesce_control; + u32 reserved_1C; +/* 0x0020 HTTLBAR */ + u32 host_task_table_lower; +/* 0x0024 HTTUBAR */ + u32 host_task_table_upper; +/* 0x0028 TCR */ + u32 task_context_range; + u32 reserved_2C; +/* 0x0030 CQLBAR */ + u32 completion_queue_lower; +/* 0x0034 CQUBAR */ + u32 completion_queue_upper; + u32 reserved_38; + u32 reserved_3C; +/* 0x0040 CQPR */ + u32 completion_queue_put; +/* 0x0044 CQGR */ + u32 completion_queue_get; +/* 0x0048 CQC */ + u32 completion_queue_control; + u32 reserved_4C; + u32 reserved_5x[4]; + u32 reserved_6x[4]; + u32 reserved_7x[4]; +/* + * Accessable to FN#0 only + * 0x0080 RNCLBAR */ + u32 remote_node_context_lower; +/* 0x0084 RNCUBAR */ + u32 remote_node_context_upper; + u32 reserved_88; + u32 reserved_8C; +/* 0x0090 DCC */ + u32 device_context_capacity; +/* 0x0094 DFC */ + u32 device_function_capacity; +/* 0x0098 SMUCSR */ + u32 control_status; +/* 0x009C SCUSRCR */ + u32 soft_reset_control; +/* 0x00A0 SMAW */ + u32 mmr_address_window; +/* 0x00A4 SMDW */ + u32 mmr_data_window; + u32 reserved_A8; + u32 reserved_AC; +/* A whole bunch of reserved space */ + u32 reserved_Bx[4]; + u32 reserved_Cx[4]; + u32 reserved_Dx[4]; + u32 reserved_Ex[4]; + u32 reserved_Fx[4]; + u32 reserved_1xx[64]; + u32 reserved_2xx[64]; + u32 reserved_3xx[64]; +/* + * Accessable to FN#0 only + * 0x0400 TCA */ + u32 task_context_assignment[256]; +/* MSI-X registers not included */ +}; + +/* + * ***************************************************************************** + * SDMA Registers + * ***************************************************************************** */ +#define SCU_SDMA_BASE 0x6000 +#define SCU_SDMA_PUFATLHAR_OFFSET 0x0000 +#define SCU_SDMA_PUFATUHAR_OFFSET 0x0004 +#define SCU_SDMA_UFLHBAR_OFFSET 0x0008 +#define SCU_SDMA_UFUHBAR_OFFSET 0x000C +#define SCU_SDMA_UFQC_OFFSET 0x0010 +#define SCU_SDMA_UFQPP_OFFSET 0x0014 +#define SCU_SDMA_UFQGP_OFFSET 0x0018 +#define SCU_SDMA_PDMACR_OFFSET 0x001C +#define SCU_SDMA_CDMACR_OFFSET 0x0080 + +/** + * struct scu_sdma_registers - These are the SCU SDMA Registers + * + * + */ +struct scu_sdma_registers { +/* 0x0000 PUFATLHAR */ + u32 uf_address_table_lower; +/* 0x0004 PUFATUHAR */ + u32 uf_address_table_upper; +/* 0x0008 UFLHBAR */ + u32 uf_header_base_address_lower; +/* 0x000C UFUHBAR */ + u32 uf_header_base_address_upper; +/* 0x0010 UFQC */ + u32 unsolicited_frame_queue_control; +/* 0x0014 UFQPP */ + u32 unsolicited_frame_put_pointer; +/* 0x0018 UFQGP */ + u32 unsolicited_frame_get_pointer; +/* 0x001C PDMACR */ + u32 pdma_configuration; +/* Reserved until offset 0x80 */ + u32 reserved_0020_007C[0x18]; +/* 0x0080 CDMACR */ + u32 cdma_configuration; +/* Remainder SDMA register space */ + u32 reserved_0084_0400[0xDF]; + +}; + +/* + * ***************************************************************************** + * * SCU Link Registers + * ***************************************************************************** */ +#define SCU_PEG0_OFFSET 0x0000 +#define SCU_PEG1_OFFSET 0x8000 + +#define SCU_TL0_OFFSET 0x0000 +#define SCU_TL1_OFFSET 0x0400 +#define SCU_TL2_OFFSET 0x0800 +#define SCU_TL3_OFFSET 0x0C00 + +#define SCU_LL_OFFSET 0x0080 +#define SCU_LL0_OFFSET (SCU_TL0_OFFSET + SCU_LL_OFFSET) +#define SCU_LL1_OFFSET (SCU_TL1_OFFSET + SCU_LL_OFFSET) +#define SCU_LL2_OFFSET (SCU_TL2_OFFSET + SCU_LL_OFFSET) +#define SCU_LL3_OFFSET (SCU_TL3_OFFSET + SCU_LL_OFFSET) + +/* Transport Layer Offsets (PEG + TL) */ +#define SCU_TLCR_OFFSET 0x0000 +#define SCU_TLADTR_OFFSET 0x0004 +#define SCU_TLTTMR_OFFSET 0x0008 +#define SCU_TLEECR0_OFFSET 0x000C +#define SCU_STPTLDARNI_OFFSET 0x0010 + + +#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_SHIFT (0) +#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_MASK (0x00000001) +#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_SHIFT (1) +#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_MASK (0x00000002) +#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_SHIFT (3) +#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_MASK (0x00000008) +#define SCU_TLCR_CMD_NAK_STATUS_CODE_SHIFT (4) +#define SCU_TLCR_CMD_NAK_STATUS_CODE_MASK (0x00000010) +#define SCU_TLCR_RESERVED_MASK (0xFFFFFFEB) + +#define SCU_TLCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_TLCR_ ## name) + +/** + * struct scu_transport_layer_registers - These are the SCU Transport Layer + * registers + * + * + */ +struct scu_transport_layer_registers { + /* 0x0000 TLCR */ + u32 control; + /* 0x0004 TLADTR */ + u32 arbitration_delay_timer; + /* 0x0008 TLTTMR */ + u32 timer_test_mode; + /* 0x000C reserved */ + u32 reserved_0C; + /* 0x0010 STPTLDARNI */ + u32 stp_rni; + /* 0x0014 TLFEWPORCTRL */ + u32 tlfe_wpo_read_control; + /* 0x0018 TLFEWPORDATA */ + u32 tlfe_wpo_read_data; + /* 0x001C RXTLSSCSR1 */ + u32 rxtl_single_step_control_status_1; + /* 0x0020 RXTLSSCSR2 */ + u32 rxtl_single_step_control_status_2; + /* 0x0024 AWTRDDCR */ + u32 tlfe_awt_retry_delay_debug_control; + /* Remainder of TL memory space */ + u32 reserved_0028_007F[0x16]; + +}; + +/* Protocol Engine Group Registers */ +#define SCU_SCUVZECRx_OFFSET 0x1080 + +/* Link Layer Offsets (PEG + TL + LL) */ +#define SCU_SAS_SPDTOV_OFFSET 0x0000 +#define SCU_SAS_LLSTA_OFFSET 0x0004 +#define SCU_SATA_PSELTOV_OFFSET 0x0008 +#define SCU_SAS_TIMETOV_OFFSET 0x0010 +#define SCU_SAS_LOSTOT_OFFSET 0x0014 +#define SCU_SAS_LNKTOV_OFFSET 0x0018 +#define SCU_SAS_PHYTOV_OFFSET 0x001C +#define SCU_SAS_AFERCNT_OFFSET 0x0020 +#define SCU_SAS_WERCNT_OFFSET 0x0024 +#define SCU_SAS_TIID_OFFSET 0x0028 +#define SCU_SAS_TIDNH_OFFSET 0x002C +#define SCU_SAS_TIDNL_OFFSET 0x0030 +#define SCU_SAS_TISSAH_OFFSET 0x0034 +#define SCU_SAS_TISSAL_OFFSET 0x0038 +#define SCU_SAS_TIPID_OFFSET 0x003C +#define SCU_SAS_TIRES2_OFFSET 0x0040 +#define SCU_SAS_ADRSTA_OFFSET 0x0044 +#define SCU_SAS_MAWTTOV_OFFSET 0x0048 +#define SCU_SAS_FRPLDFIL_OFFSET 0x0054 +#define SCU_SAS_RFCNT_OFFSET 0x0060 +#define SCU_SAS_TFCNT_OFFSET 0x0064 +#define SCU_SAS_RFDCNT_OFFSET 0x0068 +#define SCU_SAS_TFDCNT_OFFSET 0x006C +#define SCU_SAS_LERCNT_OFFSET 0x0070 +#define SCU_SAS_RDISERRCNT_OFFSET 0x0074 +#define SCU_SAS_CRERCNT_OFFSET 0x0078 +#define SCU_STPCTL_OFFSET 0x007C +#define SCU_SAS_PCFG_OFFSET 0x0080 +#define SCU_SAS_CLKSM_OFFSET 0x0084 +#define SCU_SAS_TXCOMWAKE_OFFSET 0x0088 +#define SCU_SAS_TXCOMINIT_OFFSET 0x008C +#define SCU_SAS_TXCOMSAS_OFFSET 0x0090 +#define SCU_SAS_COMINIT_OFFSET 0x0094 +#define SCU_SAS_COMWAKE_OFFSET 0x0098 +#define SCU_SAS_COMSAS_OFFSET 0x009C +#define SCU_SAS_SFERCNT_OFFSET 0x00A0 +#define SCU_SAS_CDFERCNT_OFFSET 0x00A4 +#define SCU_SAS_DNFERCNT_OFFSET 0x00A8 +#define SCU_SAS_PRSTERCNT_OFFSET 0x00AC +#define SCU_SAS_CNTCTL_OFFSET 0x00B0 +#define SCU_SAS_SSPTOV_OFFSET 0x00B4 +#define SCU_FTCTL_OFFSET 0x00B8 +#define SCU_FRCTL_OFFSET 0x00BC +#define SCU_FTWMRK_OFFSET 0x00C0 +#define SCU_ENSPINUP_OFFSET 0x00C4 +#define SCU_SAS_TRNTOV_OFFSET 0x00C8 +#define SCU_SAS_PHYCAP_OFFSET 0x00CC +#define SCU_SAS_PHYCTL_OFFSET 0x00D0 +#define SCU_SAS_LLCTL_OFFSET 0x00D8 +#define SCU_AFE_XCVRCR_OFFSET 0x00DC +#define SCU_AFE_LUTCR_OFFSET 0x00E0 + +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 (1) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 (2) +#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_SHIFT (2) +#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_MASK (0x000003FC) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_SHIFT (16) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_MASK (0x00010000) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_SHIFT (17) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_MASK (0x00020000) +#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_SHIFT (24) +#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_MASK (0xFF000000) +#define SCU_SAS_LINK_LAYER_CONTROL_RESERVED (0x00FCFC00) + +#define SCU_SAS_LLCTL_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_LINK_LAYER_CONTROL_ ## name, value) + +#define SCU_SAS_LLCTL_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_LINK_LAYER_CONTROL_ ## name) + + +/* #define SCU_FRXHECR_DCNT_OFFSET 0x00B0 */ +#define SCU_PSZGCR_OFFSET 0x00E4 +#define SCU_SAS_RECPHYCAP_OFFSET 0x00E8 +/* #define SCU_TX_LUTSEL_OFFSET 0x00B8 */ + +#define SCU_SAS_PTxC_OFFSET 0x00D4 /* Same offset as SAS_TCTSTM */ + +/** + * struct scu_link_layer_registers - SCU Link Layer Registers + * + * + */ +struct scu_link_layer_registers { +/* 0x0000 SAS_SPDTOV */ + u32 speed_negotiation_timers; +/* 0x0004 SAS_LLSTA */ + u32 link_layer_status; +/* 0x0008 SATA_PSELTOV */ + u32 port_selector_timeout; + u32 reserved0C; +/* 0x0010 SAS_TIMETOV */ + u32 timeout_unit_value; +/* 0x0014 SAS_RCDTOV */ + u32 rcd_timeout; +/* 0x0018 SAS_LNKTOV */ + u32 link_timer_timeouts; +/* 0x001C SAS_PHYTOV */ + u32 sas_phy_timeouts; +/* 0x0020 SAS_AFERCNT */ + u32 received_address_frame_error_counter; +/* 0x0024 SAS_WERCNT */ + u32 invalid_dword_counter; +/* 0x0028 SAS_TIID */ + u32 transmit_identification; +/* 0x002C SAS_TIDNH */ + u32 sas_device_name_high; +/* 0x0030 SAS_TIDNL */ + u32 sas_device_name_low; +/* 0x0034 SAS_TISSAH */ + u32 source_sas_address_high; +/* 0x0038 SAS_TISSAL */ + u32 source_sas_address_low; +/* 0x003C SAS_TIPID */ + u32 identify_frame_phy_id; +/* 0x0040 SAS_TIRES2 */ + u32 identify_frame_reserved; +/* 0x0044 SAS_ADRSTA */ + u32 received_address_frame; +/* 0x0048 SAS_MAWTTOV */ + u32 maximum_arbitration_wait_timer_timeout; +/* 0x004C SAS_PTxC */ + u32 transmit_primitive; +/* 0x0050 SAS_RORES */ + u32 error_counter_event_notification_control; +/* 0x0054 SAS_FRPLDFIL */ + u32 frxq_payload_fill_threshold; +/* 0x0058 SAS_LLHANG_TOT */ + u32 link_layer_hang_detection_timeout; + u32 reserved_5C; +/* 0x0060 SAS_RFCNT */ + u32 received_frame_count; +/* 0x0064 SAS_TFCNT */ + u32 transmit_frame_count; +/* 0x0068 SAS_RFDCNT */ + u32 received_dword_count; +/* 0x006C SAS_TFDCNT */ + u32 transmit_dword_count; +/* 0x0070 SAS_LERCNT */ + u32 loss_of_sync_error_count; +/* 0x0074 SAS_RDISERRCNT */ + u32 running_disparity_error_count; +/* 0x0078 SAS_CRERCNT */ + u32 received_frame_crc_error_count; +/* 0x007C STPCTL */ + u32 stp_control; +/* 0x0080 SAS_PCFG */ + u32 phy_configuration; +/* 0x0084 SAS_CLKSM */ + u32 clock_skew_management; +/* 0x0088 SAS_TXCOMWAKE */ + u32 transmit_comwake_signal; +/* 0x008C SAS_TXCOMINIT */ + u32 transmit_cominit_signal; +/* 0x0090 SAS_TXCOMSAS */ + u32 transmit_comsas_signal; +/* 0x0094 SAS_COMINIT */ + u32 cominit_control; +/* 0x0098 SAS_COMWAKE */ + u32 comwake_control; +/* 0x009C SAS_COMSAS */ + u32 comsas_control; +/* 0x00A0 SAS_SFERCNT */ + u32 received_short_frame_count; +/* 0x00A4 SAS_CDFERCNT */ + u32 received_frame_without_credit_count; +/* 0x00A8 SAS_DNFERCNT */ + u32 received_frame_after_done_count; +/* 0x00AC SAS_PRSTERCNT */ + u32 phy_reset_problem_count; +/* 0x00B0 SAS_CNTCTL */ + u32 counter_control; +/* 0x00B4 SAS_SSPTOV */ + u32 ssp_timer_timeout_values; +/* 0x00B8 FTCTL */ + u32 ftx_control; +/* 0x00BC FRCTL */ + u32 frx_control; +/* 0x00C0 FTWMRK */ + u32 ftx_watermark; +/* 0x00C4 ENSPINUP */ + u32 notify_enable_spinup_control; +/* 0x00C8 SAS_TRNTOV */ + u32 sas_training_sequence_timer_values; +/* 0x00CC SAS_PHYCAP */ + u32 phy_capabilities; +/* 0x00D0 SAS_PHYCTL */ + u32 phy_control; + u32 reserved_d4; +/* 0x00D8 LLCTL */ + u32 link_layer_control; +/* 0x00DC AFE_XCVRCR */ + u32 afe_xcvr_control; +/* 0x00E0 AFE_LUTCR */ + u32 afe_lookup_table_control; +/* 0x00E4 PSZGCR */ + u32 phy_source_zone_group_control; +/* 0x00E8 SAS_RECPHYCAP */ + u32 receive_phycap; + u32 reserved_ec; +/* 0x00F0 SNAFERXRSTCTL */ + u32 speed_negotiation_afe_rx_reset_control; +/* 0x00F4 SAS_SSIPMCTL */ + u32 power_management_control; +/* 0x00F8 SAS_PSPREQ_PRIM */ + u32 sas_pm_partial_request_primitive; +/* 0x00FC SAS_PSSREQ_PRIM */ + u32 sas_pm_slumber_request_primitive; +/* 0x0100 SAS_PPSACK_PRIM */ + u32 sas_pm_ack_primitive_register; +/* 0x0104 SAS_PSNAK_PRIM */ + u32 sas_pm_nak_primitive_register; +/* 0x0108 SAS_SSIPMTOV */ + u32 sas_primitive_timeout; + u32 reserved_10c; +/* 0x0110 - 0x011C PLAPRDCTRLxREG */ + u32 pla_product_control[4]; +/* 0x0120 PLAPRDSUMREG */ + u32 pla_product_sum; +/* 0x0124 PLACONTROLREG */ + u32 pla_control; +/* Remainder of memory space 896 bytes */ + u32 reserved_0128_037f[0x96]; + +}; + +/* + * 0x00D4 // Same offset as SAS_TCTSTM SAS_PTxC + * u32 primitive_transmit_control; */ + +/* + * ---------------------------------------------------------------------------- + * SGPIO + * ---------------------------------------------------------------------------- */ +#define SCU_SGPIO_OFFSET 0x1400 + +/* #define SCU_SGPIO_OFFSET 0x6000 // later moves to 0x1400 see HSD 652625 */ +#define SCU_SGPIO_SGICR_OFFSET 0x0000 +#define SCU_SGPIO_SGPBR_OFFSET 0x0004 +#define SCU_SGPIO_SGSDLR_OFFSET 0x0008 +#define SCU_SGPIO_SGSDUR_OFFSET 0x000C +#define SCU_SGPIO_SGSIDLR_OFFSET 0x0010 +#define SCU_SGPIO_SGSIDUR_OFFSET 0x0014 +#define SCU_SGPIO_SGVSCR_OFFSET 0x0018 +/* Address from 0x0820 to 0x083C */ +#define SCU_SGPIO_SGODSR_OFFSET 0x0020 + +/** + * struct scu_sgpio_registers - SCU SGPIO Registers + * + * + */ +struct scu_sgpio_registers { +/* 0x0000 SGPIO_SGICR */ + u32 interface_control; +/* 0x0004 SGPIO_SGPBR */ + u32 blink_rate; +/* 0x0008 SGPIO_SGSDLR */ + u32 start_drive_lower; +/* 0x000C SGPIO_SGSDUR */ + u32 start_drive_upper; +/* 0x0010 SGPIO_SGSIDLR */ + u32 serial_input_lower; +/* 0x0014 SGPIO_SGSIDUR */ + u32 serial_input_upper; +/* 0x0018 SGPIO_SGVSCR */ + u32 vendor_specific_code; +/* 0x0020 SGPIO_SGODSR */ + u32 ouput_data_select[8]; +/* Remainder of memory space 256 bytes */ + u32 reserved_1444_14ff[0x31]; + +}; + +/* + * ***************************************************************************** + * * Defines for VIIT entry offsets + * * Access additional entries by SCU_VIIT_BASE + index * 0x10 + * ***************************************************************************** */ +#define SCU_VIIT_BASE 0x1c00 + +struct scu_viit_registers { + u32 registers[256]; +}; + +/* + * ***************************************************************************** + * * SCU PORT TASK SCHEDULER REGISTERS + * ***************************************************************************** */ + +#define SCU_PTSG_BASE 0x1000 + +#define SCU_PTSG_PTSGCR_OFFSET 0x0000 +#define SCU_PTSG_RTCR_OFFSET 0x0004 +#define SCU_PTSG_RTCCR_OFFSET 0x0008 +#define SCU_PTSG_PTS0CR_OFFSET 0x0010 +#define SCU_PTSG_PTS0SR_OFFSET 0x0014 +#define SCU_PTSG_PTS1CR_OFFSET 0x0018 +#define SCU_PTSG_PTS1SR_OFFSET 0x001C +#define SCU_PTSG_PTS2CR_OFFSET 0x0020 +#define SCU_PTSG_PTS2SR_OFFSET 0x0024 +#define SCU_PTSG_PTS3CR_OFFSET 0x0028 +#define SCU_PTSG_PTS3SR_OFFSET 0x002C +#define SCU_PTSG_PCSPE0CR_OFFSET 0x0030 +#define SCU_PTSG_PCSPE1CR_OFFSET 0x0034 +#define SCU_PTSG_PCSPE2CR_OFFSET 0x0038 +#define SCU_PTSG_PCSPE3CR_OFFSET 0x003C +#define SCU_PTSG_ETMTSCCR_OFFSET 0x0040 +#define SCU_PTSG_ETMRNSCCR_OFFSET 0x0044 + +/** + * struct scu_port_task_scheduler_registers - These are the control/stats pairs + * for each Port Task Scheduler. + * + * + */ +struct scu_port_task_scheduler_registers { + u32 control; + u32 status; +}; + +/** + * struct scu_port_task_scheduler_group_registers - These are the PORT Task + * Scheduler registers + * + * + */ +struct scu_port_task_scheduler_group_registers { +/* 0x0000 PTSGCR */ + u32 control; +/* 0x0004 RTCR */ + u32 real_time_clock; +/* 0x0008 RTCCR */ + u32 real_time_clock_control; +/* 0x000C */ + u32 reserved_0C; +/* + * 0x0010 PTS0CR + * 0x0014 PTS0SR + * 0x0018 PTS1CR + * 0x001C PTS1SR + * 0x0020 PTS2CR + * 0x0024 PTS2SR + * 0x0028 PTS3CR + * 0x002C PTS3SR */ + struct scu_port_task_scheduler_registers port[4]; +/* + * 0x0030 PCSPE0CR + * 0x0034 PCSPE1CR + * 0x0038 PCSPE2CR + * 0x003C PCSPE3CR */ + u32 protocol_engine[4]; +/* 0x0040 ETMTSCCR */ + u32 tc_scanning_interval_control; +/* 0x0044 ETMRNSCCR */ + u32 rnc_scanning_interval_control; +/* Remainder of memory space 128 bytes */ + u32 reserved_1048_107f[0x0E]; + +}; + +#define SCU_PTSG_SCUVZECR_OFFSET 0x003C + +/* + * ***************************************************************************** + * * AFE REGISTERS + * ***************************************************************************** */ +#define SCU_AFE_MMR_BASE 0xE000 + +/* + * AFE 0 is at offset 0x0800 + * AFE 1 is at offset 0x0900 + * AFE 2 is at offset 0x0a00 + * AFE 3 is at offset 0x0b00 */ +struct scu_afe_transceiver { + /* 0x0000 AFE_XCVR_CTRL0 */ + u32 afe_xcvr_control0; + /* 0x0004 AFE_XCVR_CTRL1 */ + u32 afe_xcvr_control1; + /* 0x0008 */ + u32 reserved_0008; + /* 0x000c afe_dfx_rx_control0 */ + u32 afe_dfx_rx_control0; + /* 0x0010 AFE_DFX_RX_CTRL1 */ + u32 afe_dfx_rx_control1; + /* 0x0014 */ + u32 reserved_0014; + /* 0x0018 AFE_DFX_RX_STS0 */ + u32 afe_dfx_rx_status0; + /* 0x001c AFE_DFX_RX_STS1 */ + u32 afe_dfx_rx_status1; + /* 0x0020 */ + u32 reserved_0020; + /* 0x0024 AFE_TX_CTRL */ + u32 afe_tx_control; + /* 0x0028 AFE_TX_AMP_CTRL0 */ + u32 afe_tx_amp_control0; + /* 0x002c AFE_TX_AMP_CTRL1 */ + u32 afe_tx_amp_control1; + /* 0x0030 AFE_TX_AMP_CTRL2 */ + u32 afe_tx_amp_control2; + /* 0x0034 AFE_TX_AMP_CTRL3 */ + u32 afe_tx_amp_control3; + /* 0x0038 afe_tx_ssc_control */ + u32 afe_tx_ssc_control; + /* 0x003c */ + u32 reserved_003c; + /* 0x0040 AFE_RX_SSC_CTRL0 */ + u32 afe_rx_ssc_control0; + /* 0x0044 AFE_RX_SSC_CTRL1 */ + u32 afe_rx_ssc_control1; + /* 0x0048 AFE_RX_SSC_CTRL2 */ + u32 afe_rx_ssc_control2; + /* 0x004c AFE_RX_EQ_STS0 */ + u32 afe_rx_eq_status0; + /* 0x0050 AFE_RX_EQ_STS1 */ + u32 afe_rx_eq_status1; + /* 0x0054 AFE_RX_CDR_STS */ + u32 afe_rx_cdr_status; + /* 0x0058 */ + u32 reserved_0058; + /* 0x005c AFE_CHAN_CTRL */ + u32 afe_channel_control; + /* 0x0060-0x006c */ + u32 reserved_0060_006c[0x04]; + /* 0x0070 AFE_XCVR_EC_STS0 */ + u32 afe_xcvr_error_capture_status0; + /* 0x0074 AFE_XCVR_EC_STS1 */ + u32 afe_xcvr_error_capture_status1; + /* 0x0078 AFE_XCVR_EC_STS2 */ + u32 afe_xcvr_error_capture_status2; + /* 0x007c afe_xcvr_ec_status3 */ + u32 afe_xcvr_error_capture_status3; + /* 0x0080 AFE_XCVR_EC_STS4 */ + u32 afe_xcvr_error_capture_status4; + /* 0x0084 AFE_XCVR_EC_STS5 */ + u32 afe_xcvr_error_capture_status5; + /* 0x0088-0x00fc */ + u32 reserved_008c_00fc[0x1e]; +}; + +/** + * struct scu_afe_registers - AFE Regsiters + * + * + */ +/* Uaoa AFE registers */ +struct scu_afe_registers { + /* 0Xe000 AFE_BIAS_CTRL */ + u32 afe_bias_control; + u32 reserved_0004; + /* 0x0008 AFE_PLL_CTRL0 */ + u32 afe_pll_control0; + /* 0x000c AFE_PLL_CTRL1 */ + u32 afe_pll_control1; + /* 0x0010 AFE_PLL_CTRL2 */ + u32 afe_pll_control2; + /* 0x0014 AFE_CB_STS */ + u32 afe_common_block_status; + /* 0x0018-0x007c */ + u32 reserved_18_7c[0x1a]; + /* 0x0080 AFE_PMSN_MCTRL0 */ + u32 afe_pmsn_master_control0; + /* 0x0084 AFE_PMSN_MCTRL1 */ + u32 afe_pmsn_master_control1; + /* 0x0088 AFE_PMSN_MCTRL2 */ + u32 afe_pmsn_master_control2; + /* 0x008C-0x00fc */ + u32 reserved_008c_00fc[0x1D]; + /* 0x0100 AFE_DFX_MST_CTRL0 */ + u32 afe_dfx_master_control0; + /* 0x0104 AFE_DFX_MST_CTRL1 */ + u32 afe_dfx_master_control1; + /* 0x0108 AFE_DFX_DCL_CTRL */ + u32 afe_dfx_dcl_control; + /* 0x010c AFE_DFX_DMON_CTRL */ + u32 afe_dfx_digital_monitor_control; + /* 0x0110 AFE_DFX_AMONP_CTRL */ + u32 afe_dfx_analog_p_monitor_control; + /* 0x0114 AFE_DFX_AMONN_CTRL */ + u32 afe_dfx_analog_n_monitor_control; + /* 0x0118 AFE_DFX_NTL_STS */ + u32 afe_dfx_ntl_status; + /* 0x011c AFE_DFX_FIFO_STS0 */ + u32 afe_dfx_fifo_status0; + /* 0x0120 AFE_DFX_FIFO_STS1 */ + u32 afe_dfx_fifo_status1; + /* 0x0124 AFE_DFX_MPAT_CTRL */ + u32 afe_dfx_master_pattern_control; + /* 0x0128 AFE_DFX_P0_CTRL */ + u32 afe_dfx_p0_control; + /* 0x012c-0x01a8 AFE_DFX_P0_DRx */ + u32 afe_dfx_p0_data[32]; + /* 0x01ac */ + u32 reserved_01ac; + /* 0x01b0-0x020c AFE_DFX_P0_IRx */ + u32 afe_dfx_p0_instruction[24]; + /* 0x0210 */ + u32 reserved_0210; + /* 0x0214 AFE_DFX_P1_CTRL */ + u32 afe_dfx_p1_control; + /* 0x0218-0x245 AFE_DFX_P1_DRx */ + u32 afe_dfx_p1_data[16]; + /* 0x0258-0x029c */ + u32 reserved_0258_029c[0x12]; + /* 0x02a0-0x02bc AFE_DFX_P1_IRx */ + u32 afe_dfx_p1_instruction[8]; + /* 0x02c0-0x2fc */ + u32 reserved_02c0_02fc[0x10]; + /* 0x0300 AFE_DFX_TX_PMSN_CTRL */ + u32 afe_dfx_tx_pmsn_control; + /* 0x0304 AFE_DFX_RX_PMSN_CTRL */ + u32 afe_dfx_rx_pmsn_control; + u32 reserved_0308; + /* 0x030c AFE_DFX_NOA_CTRL0 */ + u32 afe_dfx_noa_control0; + /* 0x0310 AFE_DFX_NOA_CTRL1 */ + u32 afe_dfx_noa_control1; + /* 0x0314 AFE_DFX_NOA_CTRL2 */ + u32 afe_dfx_noa_control2; + /* 0x0318 AFE_DFX_NOA_CTRL3 */ + u32 afe_dfx_noa_control3; + /* 0x031c AFE_DFX_NOA_CTRL4 */ + u32 afe_dfx_noa_control4; + /* 0x0320 AFE_DFX_NOA_CTRL5 */ + u32 afe_dfx_noa_control5; + /* 0x0324 AFE_DFX_NOA_CTRL6 */ + u32 afe_dfx_noa_control6; + /* 0x0328 AFE_DFX_NOA_CTRL7 */ + u32 afe_dfx_noa_control7; + /* 0x032c-0x07fc */ + u32 reserved_032c_07fc[0x135]; + + /* 0x0800-0x0bfc */ + struct scu_afe_transceiver scu_afe_xcvr[4]; + + /* 0x0c00-0x0ffc */ + u32 reserved_0c00_0ffc[0x0100]; +}; + +struct scu_protocol_engine_group_registers { + u32 table[0xE0]; +}; + + +struct scu_viit_iit { + u32 table[256]; +}; + +/** + * Placeholder for the ZONE Partition Table information ZONING will not be + * included in the 1.1 release. + * + * + */ +struct scu_zone_partition_table { + u32 table[2048]; +}; + +/** + * Placeholder for the CRAM register since I am not sure if we need to + * read/write to these registers as yet. + * + * + */ +struct scu_completion_ram { + u32 ram[128]; +}; + +/** + * Placeholder for the FBRAM registers since I am not sure if we need to + * read/write to these registers as yet. + * + * + */ +struct scu_frame_buffer_ram { + u32 ram[128]; +}; + +#define scu_scratch_ram_SIZE_IN_DWORDS 256 + +/** + * Placeholder for the scratch RAM registers. + * + * + */ +struct scu_scratch_ram { + u32 ram[scu_scratch_ram_SIZE_IN_DWORDS]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_protocol_engine_partition { + u32 reserved[64]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_hub_partition { + u32 reserved[64]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_host_interface_partition { + u32 reserved[64]; +}; + +/** + * struct transport_link_layer_pair - The SCU Hardware pairs up the TL + * registers with the LL registers so we must place them adjcent to make the + * array of registers in the PEG. + * + * + */ +struct transport_link_layer_pair { + struct scu_transport_layer_registers tl; + struct scu_link_layer_registers ll; +}; + +/** + * struct scu_peg_registers - SCU Protocol Engine Memory mapped register space. + * These registers are unique to each protocol engine group. There can be + * at most two PEG for a single SCU part. + * + * + */ +struct scu_peg_registers { + struct transport_link_layer_pair pe[4]; + struct scu_port_task_scheduler_group_registers ptsg; + struct scu_protocol_engine_group_registers peg; + struct scu_sgpio_registers sgpio; + u32 reserved_01500_1BFF[0x1C0]; + struct scu_viit_entry viit[64]; + struct scu_zone_partition_table zpt0; + struct scu_zone_partition_table zpt1; +}; + +/** + * struct scu_registers - SCU regsiters including both PEG registers if we turn + * on that compile option. All of these registers are in the memory mapped + * space returned from BAR1. + * + * + */ +struct scu_registers { + /* 0x0000 - PEG 0 */ + struct scu_peg_registers peg0; + + /* 0x6000 - SDMA and Miscellaneous */ + struct scu_sdma_registers sdma; + struct scu_completion_ram cram; + struct scu_frame_buffer_ram fbram; + u32 reserved_6800_69FF[0x80]; + struct noa_protocol_engine_partition noa_pe; + struct noa_hub_partition noa_hub; + struct noa_host_interface_partition noa_if; + u32 reserved_6d00_7fff[0x4c0]; + + /* 0x8000 - PEG 1 */ + struct scu_peg_registers peg1; + + /* 0xE000 - AFE Registers */ + struct scu_afe_registers afe; + + /* 0xF000 - reserved */ + u32 reserved_f000_211fff[0x80c00]; + + /* 0x212000 - scratch RAM */ + struct scu_scratch_ram scratch_ram; +}; + +#endif /* _SCU_REGISTERS_HEADER_ */ diff --git a/drivers/scsi/isci/scu_completion_codes.h b/drivers/scsi/isci/scu_completion_codes.h new file mode 100644 index 0000000..c8b329c --- /dev/null +++ b/drivers/scsi/isci/scu_completion_codes.h @@ -0,0 +1,283 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_COMPLETION_CODES_HEADER_ +#define _SCU_COMPLETION_CODES_HEADER_ + +/** + * This file contains the constants and macros for the SCU hardware completion + * codes. + * + * + */ + +#define SCU_COMPLETION_TYPE_SHIFT 28 +#define SCU_COMPLETION_TYPE_MASK 0x70000000 + +/** + * SCU_COMPLETION_TYPE() - + * + * This macro constructs an SCU completion type + */ +#define SCU_COMPLETION_TYPE(type) \ + ((u32)(type) << SCU_COMPLETION_TYPE_SHIFT) + +/** + * SCU_COMPLETION_TYPE() - + * + * These macros contain the SCU completion types SCU_COMPLETION_TYPE + */ +#define SCU_COMPLETION_TYPE_TASK SCU_COMPLETION_TYPE(0) +#define SCU_COMPLETION_TYPE_SDMA SCU_COMPLETION_TYPE(1) +#define SCU_COMPLETION_TYPE_UFI SCU_COMPLETION_TYPE(2) +#define SCU_COMPLETION_TYPE_EVENT SCU_COMPLETION_TYPE(3) +#define SCU_COMPLETION_TYPE_NOTIFY SCU_COMPLETION_TYPE(4) + +/** + * + * + * These constants provide the shift and mask values for the various parts of + * an SCU completion code. + */ +#define SCU_COMPLETION_STATUS_MASK 0x0FFC0000 +#define SCU_COMPLETION_TL_STATUS_MASK 0x0FC00000 +#define SCU_COMPLETION_TL_STATUS_SHIFT 22 +#define SCU_COMPLETION_SDMA_STATUS_MASK 0x003C0000 +#define SCU_COMPLETION_PEG_MASK 0x00010000 +#define SCU_COMPLETION_PORT_MASK 0x00007000 +#define SCU_COMPLETION_PE_MASK SCU_COMPLETION_PORT_MASK +#define SCU_COMPLETION_PE_SHIFT 12 +#define SCU_COMPLETION_INDEX_MASK 0x00000FFF + +/** + * SCU_GET_COMPLETION_TYPE() - + * + * This macro returns the SCU completion type. + */ +#define SCU_GET_COMPLETION_TYPE(completion_code) \ + ((completion_code) & SCU_COMPLETION_TYPE_MASK) + +/** + * SCU_GET_COMPLETION_STATUS() - + * + * This macro returns the SCU completion status. + */ +#define SCU_GET_COMPLETION_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_STATUS_MASK) + +/** + * SCU_GET_COMPLETION_TL_STATUS() - + * + * This macro returns the transport layer completion status. + */ +#define SCU_GET_COMPLETION_TL_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) + +/** + * SCU_MAKE_COMPLETION_STATUS() - + * + * This macro takes a completion code and performs the shift and mask + * operations to turn it into a completion code that can be compared to a + * SCU_GET_COMPLETION_TL_STATUS. + */ +#define SCU_MAKE_COMPLETION_STATUS(completion_code) \ + ((u32)(completion_code) << SCU_COMPLETION_TL_STATUS_SHIFT) + +/** + * SCU_NORMALIZE_COMPLETION_STATUS() - + * + * This macro takes a SCU_GET_COMPLETION_TL_STATUS and normalizes it for a + * return code. + */ +#define SCU_NORMALIZE_COMPLETION_STATUS(completion_code) \ + (\ + ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) \ + >> SCU_COMPLETION_TL_STATUS_SHIFT \ + ) + +/** + * SCU_GET_COMPLETION_SDMA_STATUS() - + * + * This macro returns the SDMA completion status. + */ +#define SCU_GET_COMPLETION_SDMA_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_SDMA_STATUS_MASK) + +/** + * SCU_GET_COMPLETION_PEG() - + * + * This macro returns the Protocol Engine Group from the completion code. + */ +#define SCU_GET_COMPLETION_PEG(completion_code) \ + ((completion_code) & SCU_COMPLETION_PEG_MASK) + +/** + * SCU_GET_COMPLETION_PORT() - + * + * This macro reuturns the logical port index from the completion code. + */ +#define SCU_GET_COMPLETION_PORT(completion_code) \ + ((completion_code) & SCU_COMPLETION_PORT_MASK) + +/** + * SCU_GET_PROTOCOL_ENGINE_INDEX() - + * + * This macro returns the PE index from the completion code. + */ +#define SCU_GET_PROTOCOL_ENGINE_INDEX(completion_code) \ + (((completion_code) & SCU_COMPLETION_PE_MASK) >> SCU_COMPLETION_PE_SHIFT) + +/** + * SCU_GET_COMPLETION_INDEX() - + * + * This macro returns the index of the completion which is either a TCi or an + * RNi depending on the completion type. + */ +#define SCU_GET_COMPLETION_INDEX(completion_code) \ + ((completion_code) & SCU_COMPLETION_INDEX_MASK) + +#define SCU_UNSOLICITED_FRAME_MASK 0x0FFF0000 +#define SCU_UNSOLICITED_FRAME_SHIFT 16 + +/** + * SCU_GET_FRAME_INDEX() - + * + * This macro returns a normalized frame index from an unsolicited frame + * completion. + */ +#define SCU_GET_FRAME_INDEX(completion_code) \ + (\ + ((completion_code) & SCU_UNSOLICITED_FRAME_MASK) \ + >> SCU_UNSOLICITED_FRAME_SHIFT \ + ) + +#define SCU_UNSOLICITED_FRAME_ERROR_MASK 0x00008000 + +/** + * SCU_GET_FRAME_ERROR() - + * + * This macro returns a zero (0) value if there is no frame error otherwise it + * returns non-zero (!0). + */ +#define SCU_GET_FRAME_ERROR(completion_code) \ + ((completion_code) & SCU_UNSOLICITED_FRAME_ERROR_MASK) + +/** + * + * + * These constants represent normalized completion codes which must be shifted + * 18 bits to match it with the hardware completion code. In a 16-bit compiler, + * immediate constants are 16-bit values (the size of an int). If we shift + * those by 18 bits, we completely lose the value. To ensure the value is a + * 32-bit value like we want, each immediate value must be cast to a u32. + */ +#define SCU_TASK_DONE_GOOD ((u32)0x00) +#define SCU_TASK_DONE_CRC_ERR ((u32)0x14) +#define SCU_TASK_DONE_CHECK_RESPONSE ((u32)0x14) +#define SCU_TASK_DONE_GEN_RESPONSE ((u32)0x15) +#define SCU_TASK_DONE_NAK_CMD_ERR ((u32)0x16) +#define SCU_TASK_DONE_CMD_LL_R_ERR ((u32)0x16) +#define SCU_TASK_DONE_LL_R_ERR ((u32)0x17) +#define SCU_TASK_DONE_ACK_NAK_TO ((u32)0x17) +#define SCU_TASK_DONE_LL_PERR ((u32)0x18) +#define SCU_TASK_DONE_LL_SY_TERM ((u32)0x19) +#define SCU_TASK_DONE_NAK_ERR ((u32)0x19) +#define SCU_TASK_DONE_LL_LF_TERM ((u32)0x1A) +#define SCU_TASK_DONE_DATA_LEN_ERR ((u32)0x1A) +#define SCU_TASK_DONE_LL_CL_TERM ((u32)0x1B) +#define SCU_TASK_DONE_LL_ABORT_ERR ((u32)0x1B) +#define SCU_TASK_DONE_SEQ_INV_TYPE ((u32)0x1C) +#define SCU_TASK_DONE_UNEXP_XR ((u32)0x1C) +#define SCU_TASK_DONE_INV_FIS_TYPE ((u32)0x1D) +#define SCU_TASK_DONE_XR_IU_LEN_ERR ((u32)0x1D) +#define SCU_TASK_DONE_INV_FIS_LEN ((u32)0x1E) +#define SCU_TASK_DONE_XR_WD_LEN ((u32)0x1E) +#define SCU_TASK_DONE_SDMA_ERR ((u32)0x1F) +#define SCU_TASK_DONE_OFFSET_ERR ((u32)0x20) +#define SCU_TASK_DONE_MAX_PLD_ERR ((u32)0x21) +#define SCU_TASK_DONE_EXCESS_DATA ((u32)0x22) +#define SCU_TASK_DONE_LF_ERR ((u32)0x23) +#define SCU_TASK_DONE_UNEXP_FIS ((u32)0x24) +#define SCU_TASK_DONE_UNEXP_RESP ((u32)0x24) +#define SCU_TASK_DONE_EARLY_RESP ((u32)0x25) +#define SCU_TASK_DONE_SMP_RESP_TO_ERR ((u32)0x26) +#define SCU_TASK_DONE_DMASETUP_DIRERR ((u32)0x27) +#define SCU_TASK_DONE_SMP_UFI_ERR ((u32)0x27) +#define SCU_TASK_DONE_XFERCNT_ERR ((u32)0x28) +#define SCU_TASK_DONE_SMP_FRM_TYPE_ERR ((u32)0x28) +#define SCU_TASK_DONE_SMP_LL_RX_ERR ((u32)0x29) +#define SCU_TASK_DONE_RESP_LEN_ERR ((u32)0x2A) +#define SCU_TASK_DONE_UNEXP_DATA ((u32)0x2B) +#define SCU_TASK_DONE_OPEN_FAIL ((u32)0x2C) +#define SCU_TASK_DONE_UNEXP_SDBFIS ((u32)0x2D) +#define SCU_TASK_DONE_REG_ERR ((u32)0x2E) +#define SCU_TASK_DONE_SDB_ERR ((u32)0x2F) +#define SCU_TASK_DONE_TASK_ABORT ((u32)0x30) +#define SCU_TASK_DONE_CMD_SDMA_ERR ((U32)0x32) +#define SCU_TASK_DONE_CMD_LL_ABORT_ERR ((U32)0x33) +#define SCU_TASK_OPEN_REJECT_WRONG_DESTINATION ((u32)0x34) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1 ((u32)0x35) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2 ((u32)0x36) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3 ((u32)0x37) +#define SCU_TASK_OPEN_REJECT_BAD_DESTINATION ((u32)0x38) +#define SCU_TASK_OPEN_REJECT_ZONE_VIOLATION ((u32)0x39) +#define SCU_TASK_DONE_VIIT_ENTRY_NV ((u32)0x3A) +#define SCU_TASK_DONE_IIT_ENTRY_NV ((u32)0x3B) +#define SCU_TASK_DONE_RNCNV_OUTBOUND ((u32)0x3C) +#define SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY ((u32)0x3D) +#define SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED ((u32)0x3E) +#define SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED ((u32)0x3F) + +#endif /* _SCU_COMPLETION_CODES_HEADER_ */ diff --git a/drivers/scsi/isci/scu_event_codes.h b/drivers/scsi/isci/scu_event_codes.h new file mode 100644 index 0000000..36a945a --- /dev/null +++ b/drivers/scsi/isci/scu_event_codes.h @@ -0,0 +1,336 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_EVENT_CODES_HEADER__ +#define __SCU_EVENT_CODES_HEADER__ + +/** + * This file contains the constants and macros for the SCU event codes. + * + * + */ + +#define SCU_EVENT_TYPE_CODE_SHIFT 24 +#define SCU_EVENT_TYPE_CODE_MASK 0x0F000000 + +#define SCU_EVENT_SPECIFIC_CODE_SHIFT 18 +#define SCU_EVENT_SPECIFIC_CODE_MASK 0x00FC0000 + +#define SCU_EVENT_CODE_MASK \ + (SCU_EVENT_TYPE_CODE_MASK | SCU_EVENT_SPECIFIC_CODE_MASK) + +/** + * SCU_EVENT_TYPE() - + * + * This macro constructs an SCU event type from the type value. + */ +#define SCU_EVENT_TYPE(type) \ + ((u32)(type) << SCU_EVENT_TYPE_CODE_SHIFT) + +/** + * SCU_EVENT_SPECIFIC() - + * + * This macro constructs an SCU event specifier from the code value. + */ +#define SCU_EVENT_SPECIFIC(code) \ + ((u32)(code) << SCU_EVENT_SPECIFIC_CODE_SHIFT) + +/** + * SCU_EVENT_MESSAGE() - + * + * This macro constructs a combines an SCU event type and SCU event specifier + * from the type and code values. + */ +#define SCU_EVENT_MESSAGE(type, code) \ + ((type) | SCU_EVENT_SPECIFIC(code)) + +/** + * SCU_EVENT_TYPE() - + * + * SCU_EVENT_TYPES + */ +#define SCU_EVENT_TYPE_SMU_COMMAND_ERROR SCU_EVENT_TYPE(0x08) +#define SCU_EVENT_TYPE_SMU_PCQ_ERROR SCU_EVENT_TYPE(0x09) +#define SCU_EVENT_TYPE_SMU_ERROR SCU_EVENT_TYPE(0x00) +#define SCU_EVENT_TYPE_TRANSPORT_ERROR SCU_EVENT_TYPE(0x01) +#define SCU_EVENT_TYPE_BROADCAST_CHANGE SCU_EVENT_TYPE(0x02) +#define SCU_EVENT_TYPE_OSSP_EVENT SCU_EVENT_TYPE(0x03) +#define SCU_EVENT_TYPE_FATAL_MEMORY_ERROR SCU_EVENT_TYPE(0x0F) +#define SCU_EVENT_TYPE_RNC_SUSPEND_TX SCU_EVENT_TYPE(0x04) +#define SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX SCU_EVENT_TYPE(0x05) +#define SCU_EVENT_TYPE_RNC_OPS_MISC SCU_EVENT_TYPE(0x06) +#define SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT SCU_EVENT_TYPE(0x07) +#define SCU_EVENT_TYPE_ERR_CNT_EVENT SCU_EVENT_TYPE(0x0A) + +/** + * + * + * SCU_EVENT_SPECIFIERS + */ +#define SCU_EVENT_SPECIFIER_DRIVER_SUSPEND 0x20 +#define SCU_EVENT_SPECIFIER_RNC_RELEASE 0x00 + +/** + * + * + * SMU_COMMAND_EVENTS + */ +#define SCU_EVENT_INVALID_CONTEXT_COMMAND \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_COMMAND_ERROR, 0x00) + +/** + * + * + * SMU_PCQ_EVENTS + */ +#define SCU_EVENT_UNCORRECTABLE_PCQ_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_PCQ_ERROR, 0x00) + +/** + * + * + * SMU_EVENTS + */ +#define SCU_EVENT_UNCORRECTABLE_REGISTER_WRITE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x02) +#define SCU_EVENT_UNCORRECTABLE_REGISTER_READ \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x03) +#define SCU_EVENT_PCIE_INTERFACE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x04) +#define SCU_EVENT_FUNCTION_LEVEL_RESET \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x05) + +/** + * + * + * TRANSPORT_LEVEL_ERRORS + */ +#define SCU_EVENT_ACK_NAK_TIMEOUT_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_TRANSPORT_ERROR, 0x00) + +/** + * + * + * BROADCAST_CHANGE_EVENTS + */ +#define SCU_EVENT_BROADCAST_CHANGE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x01) +#define SCU_EVENT_BROADCAST_RESERVED0 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x02) +#define SCU_EVENT_BROADCAST_RESERVED1 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x03) +#define SCU_EVENT_BROADCAST_SES \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x04) +#define SCU_EVENT_BROADCAST_EXPANDER \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x05) +#define SCU_EVENT_BROADCAST_AEN \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x06) +#define SCU_EVENT_BROADCAST_RESERVED3 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x07) +#define SCU_EVENT_BROADCAST_RESERVED4 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x08) +#define SCU_EVENT_PE_SUSPENDED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x09) + +/** + * + * + * OSSP_EVENTS + */ +#define SCU_EVENT_PORT_SELECTOR_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x10) +#define SCU_EVENT_SENT_PORT_SELECTION \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x11) +#define SCU_EVENT_HARD_RESET_TRANSMITTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x12) +#define SCU_EVENT_HARD_RESET_RECEIVED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x13) +#define SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x15) +#define SCU_EVENT_LINK_FAILURE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x16) +#define SCU_EVENT_SATA_SPINUP_HOLD \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x17) +#define SCU_EVENT_SAS_15_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x18) +#define SCU_EVENT_SAS_15 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x19) +#define SCU_EVENT_SAS_30_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1A) +#define SCU_EVENT_SAS_30 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1B) +#define SCU_EVENT_SAS_60_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1C) +#define SCU_EVENT_SAS_60 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1D) +#define SCU_EVENT_SATA_15_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1E) +#define SCU_EVENT_SATA_15 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1F) +#define SCU_EVENT_SATA_30_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x20) +#define SCU_EVENT_SATA_30 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x21) +#define SCU_EVENT_SATA_60_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x22) +#define SCU_EVENT_SATA_60 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x23) +#define SCU_EVENT_SAS_PHY_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x24) +#define SCU_EVENT_SATA_PHY_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x25) + +/** + * + * + * FATAL_INTERNAL_MEMORY_ERROR_EVENTS + */ +#define SCU_EVENT_TSC_RNSC_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x00) +#define SCU_EVENT_TC_RNC_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x01) +#define SCU_EVENT_ZPT_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x02) + +/** + * + * + * REMOTE_NODE_SUSPEND_EVENTS + */ +#define SCU_EVENT_TL_RNC_SUSPEND_TX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x00) +#define SCU_EVENT_TL_RNC_SUSPEND_TX_RX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x00) +#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x20) +#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX_RX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x20) + +/** + * + * + * REMOTE_NODE_MISC_EVENTS + */ +#define SCU_EVENT_POST_RCN_RELEASE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, SCU_EVENT_SPECIFIER_RNC_RELEASE) +#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_ENABLE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x01) +#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_DISABLE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x02) +#define SCU_EVENT_POST_RNC_COMPLETE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x03) +#define SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x04) + +/** + * + * + * ERROR_COUNT_EVENT + */ +#define SCU_EVENT_RX_CREDIT_BLOCKED_RECEIVED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x00) +#define SCU_EVENT_TX_DONE_CREDIT_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x01) +#define SCU_EVENT_RX_DONE_CREDIT_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x02) + +/** + * scu_get_event_type() - + * + * This macro returns the SCU event type from the event code. + */ +#define scu_get_event_type(event_code) \ + ((event_code) & SCU_EVENT_TYPE_CODE_MASK) + +/** + * scu_get_event_specifier() - + * + * This macro returns the SCU event specifier from the event code. + */ +#define scu_get_event_specifier(event_code) \ + ((event_code) & SCU_EVENT_SPECIFIC_CODE_MASK) + +/** + * scu_get_event_code() - + * + * This macro returns the combined SCU event type and SCU event specifier from + * the event code. + */ +#define scu_get_event_code(event_code) \ + ((event_code) & SCU_EVENT_CODE_MASK) + + +/** + * + * + * PTS_SCHEDULE_EVENT + */ +#define SCU_EVENT_SMP_RESPONSE_NO_PE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x00) +#define SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE \ + scu_get_event_specifier(SCU_EVENT_SMP_RESPONSE_NO_PE) + +#define SCU_EVENT_TASK_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x01) +#define SCU_EVENT_SPECIFIC_TASK_TIMEOUT \ + scu_get_event_specifier(SCU_EVENT_TASK_TIMEOUT) + +#define SCU_EVENT_IT_NEXUS_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x02) +#define SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT \ + scu_get_event_specifier(SCU_EVENT_IT_NEXUS_TIMEOUT) + + +#endif /* __SCU_EVENT_CODES_HEADER__ */ diff --git a/drivers/scsi/isci/scu_task_context.h b/drivers/scsi/isci/scu_task_context.h new file mode 100644 index 0000000..7df87d9 --- /dev/null +++ b/drivers/scsi/isci/scu_task_context.h @@ -0,0 +1,942 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_TASK_CONTEXT_H_ +#define _SCU_TASK_CONTEXT_H_ + +/** + * This file contains the structures and constants for the SCU hardware task + * context. + * + * + */ + + +/** + * enum scu_ssp_task_type - This enumberation defines the various SSP task + * types the SCU hardware will accept. The definition for the various task + * types the SCU hardware will accept can be found in the DS specification. + * + * + */ +typedef enum { + SCU_TASK_TYPE_IOREAD, /* /< IO READ direction or no direction */ + SCU_TASK_TYPE_IOWRITE, /* /< IO Write direction */ + SCU_TASK_TYPE_SMP_REQUEST, /* /< SMP Request type */ + SCU_TASK_TYPE_RESPONSE, /* /< Driver generated response frame (targt mode) */ + SCU_TASK_TYPE_RAW_FRAME, /* /< Raw frame request type */ + SCU_TASK_TYPE_PRIMITIVE /* /< Request for a primitive to be transmitted */ +} scu_ssp_task_type; + +/** + * enum scu_sata_task_type - This enumeration defines the various SATA task + * types the SCU hardware will accept. The definition for the various task + * types the SCU hardware will accept can be found in the DS specification. + * + * + */ +typedef enum { + SCU_TASK_TYPE_DMA_IN, /* /< Read request */ + SCU_TASK_TYPE_FPDMAQ_READ, /* /< NCQ read request */ + SCU_TASK_TYPE_PACKET_DMA_IN, /* /< Packet read request */ + SCU_TASK_TYPE_SATA_RAW_FRAME, /* /< Raw frame request */ + RESERVED_4, + RESERVED_5, + RESERVED_6, + RESERVED_7, + SCU_TASK_TYPE_DMA_OUT, /* /< Write request */ + SCU_TASK_TYPE_FPDMAQ_WRITE, /* /< NCQ write Request */ + SCU_TASK_TYPE_PACKET_DMA_OUT /* /< Packet write request */ +} scu_sata_task_type; + + +/** + * + * + * SCU_CONTEXT_TYPE + */ +#define SCU_TASK_CONTEXT_TYPE 0 +#define SCU_RNC_CONTEXT_TYPE 1 + +/** + * + * + * SCU_TASK_CONTEXT_VALIDITY + */ +#define SCU_TASK_CONTEXT_INVALID 0 +#define SCU_TASK_CONTEXT_VALID 1 + +/** + * + * + * SCU_COMMAND_CODE + */ +#define SCU_COMMAND_CODE_INITIATOR_NEW_TASK 0 +#define SCU_COMMAND_CODE_ACTIVE_TASK 1 +#define SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK 2 +#define SCU_COMMAND_CODE_TARGET_RAW_FRAMES 3 + +/** + * + * + * SCU_TASK_PRIORITY + */ +/** + * + * + * This priority is used when there is no priority request for this request. + */ +#define SCU_TASK_PRIORITY_NORMAL 0 + +/** + * + * + * This priority indicates that the task should be scheduled to the head of the + * queue. The task will NOT be executed if the TX is suspended for the remote + * node. + */ +#define SCU_TASK_PRIORITY_HEAD_OF_Q 1 + +/** + * + * + * This priority indicates that the task will be executed before all + * SCU_TASK_PRIORITY_NORMAL and SCU_TASK_PRIORITY_HEAD_OF_Q tasks. The task + * WILL be executed if the TX is suspended for the remote node. + */ +#define SCU_TASK_PRIORITY_HIGH 2 + +/** + * + * + * This task priority is reserved and should not be used. + */ +#define SCU_TASK_PRIORITY_RESERVED 3 + +#define SCU_TASK_INITIATOR_MODE 1 +#define SCU_TASK_TARGET_MODE 0 + +#define SCU_TASK_REGULAR 0 +#define SCU_TASK_ABORTED 1 + +/* direction bit defintion */ +/** + * + * + * SATA_DIRECTION + */ +#define SCU_SATA_WRITE_DATA_DIRECTION 0 +#define SCU_SATA_READ_DATA_DIRECTION 1 + +/** + * + * + * SCU_COMMAND_CONTEXT_MACROS These macros provide the mask and shift + * operations to construct the various SCU commands + */ +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT 21 +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK 0x00E00000 +#define scu_get_command_request_type(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK) + +#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT 18 +#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK 0x001C0000 +#define scu_get_command_request_subtype(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK) + +#define SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK \ + (\ + SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK \ + | SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK \ + ) +#define scu_get_command_request_full_type(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK) + +#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 16 +#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK 0x00010000 +#define scu_get_command_protocl_engine_group(x) \ + ((x) & SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK) + +#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 12 +#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK 0x00007000 +#define scu_get_command_reqeust_logical_port(x) \ + ((x) & SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK) + + +#define MAKE_SCU_CONTEXT_COMMAND_TYPE(type) \ + ((u32)(type) << SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT) + +/** + * MAKE_SCU_CONTEXT_COMMAND_TYPE() - + * + * SCU_COMMAND_TYPES These constants provide the grouping of the different SCU + * command types. + */ +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(0) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(1) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(2) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(3) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(6) + +#define MAKE_SCU_CONTEXT_COMMAND_REQUEST(type, command) \ + ((type) | ((command) << SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT)) + +/** + * + * + * SCU_REQUEST_TYPES These constants are the various request types that can be + * posted to the SCU hardware. + */ +#define SCU_CONTEXT_COMMAND_REQUST_POST_TC \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 0)) + +#define SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 1)) + +#define SCU_CONTEXT_COMMAND_REQUST_DUMP_TC \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_32 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_96 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 2)) + +#define SCU_CONTEXT_COMMAND_DUMP_RNC_32 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_DUMP_RNC_96 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_RESUME \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 2)) + +#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_ENABLE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 3)) + +#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_DISABLE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 4)) + +/** + * + * + * SCU_TASK_CONTEXT_PROTOCOL SCU Task context protocol types this is uesd to + * program the SCU Task context protocol field in word 0x00. + */ +#define SCU_TASK_CONTEXT_PROTOCOL_SMP 0x00 +#define SCU_TASK_CONTEXT_PROTOCOL_SSP 0x01 +#define SCU_TASK_CONTEXT_PROTOCOL_STP 0x02 +#define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07 + +/** + * struct ssp_task_context - This is the SCU hardware definition for an SSP + * request. + * + * + */ +struct ssp_task_context { + /* OFFSET 0x18 */ + u32 reserved00:24; + u32 frame_type:8; + + /* OFFSET 0x1C */ + u32 reserved01; + + /* OFFSET 0x20 */ + u32 fill_bytes:2; + u32 reserved02:6; + u32 changing_data_pointer:1; + u32 retransmit:1; + u32 retry_data_frame:1; + u32 tlr_control:2; + u32 reserved03:19; + + /* OFFSET 0x24 */ + u32 uiRsvd4; + + /* OFFSET 0x28 */ + u32 target_port_transfer_tag:16; + u32 tag:16; + + /* OFFSET 0x2C */ + u32 data_offset; +}; + +/** + * struct stp_task_context - This is the SCU hardware definition for an STP + * request. + * + * + */ +struct stp_task_context { + /* OFFSET 0x18 */ + u32 fis_type:8; + u32 pm_port:4; + u32 reserved0:3; + u32 control:1; + u32 command:8; + u32 features:8; + + /* OFFSET 0x1C */ + u32 reserved1; + + /* OFFSET 0x20 */ + u32 reserved2; + + /* OFFSET 0x24 */ + u32 reserved3; + + /* OFFSET 0x28 */ + u32 ncq_tag:5; + u32 reserved4:27; + + /* OFFSET 0x2C */ + u32 data_offset; /* TODO: What is this used for? */ +}; + +/** + * struct smp_task_context - This is the SCU hardware definition for an SMP + * request. + * + * + */ +struct smp_task_context { + /* OFFSET 0x18 */ + u32 response_length:8; + u32 function_result:8; + u32 function:8; + u32 frame_type:8; + + /* OFFSET 0x1C */ + u32 smp_response_ufi:12; + u32 reserved1:20; + + /* OFFSET 0x20 */ + u32 reserved2; + + /* OFFSET 0x24 */ + u32 reserved3; + + /* OFFSET 0x28 */ + u32 reserved4; + + /* OFFSET 0x2C */ + u32 reserved5; +}; + +/** + * struct primitive_task_context - This is the SCU hardware definition used + * when the driver wants to send a primitive on the link. + * + * + */ +struct primitive_task_context { + /* OFFSET 0x18 */ + /** + * This field is the control word and it must be 0. + */ + u32 control; /* /< must be set to 0 */ + + /* OFFSET 0x1C */ + /** + * This field specifies the primitive that is to be transmitted. + */ + u32 sequence; + + /* OFFSET 0x20 */ + u32 reserved0; + + /* OFFSET 0x24 */ + u32 reserved1; + + /* OFFSET 0x28 */ + u32 reserved2; + + /* OFFSET 0x2C */ + u32 reserved3; +}; + +/** + * The union of the protocols that can be selected in the SCU task context + * field. + * + * protocol_context + */ +union protocol_context { + struct ssp_task_context ssp; + struct stp_task_context stp; + struct smp_task_context smp; + struct primitive_task_context primitive; + u32 words[6]; +}; + +/** + * struct scu_sgl_element - This structure represents a single SCU defined SGL + * element. SCU SGLs contain a 64 bit address with the maximum data transfer + * being 24 bits in size. The SGL can not cross a 4GB boundary. + * + * struct scu_sgl_element + */ +struct scu_sgl_element { + /** + * This field is the upper 32 bits of the 64 bit physical address. + */ + u32 address_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address. + */ + u32 address_lower; + + /** + * This field is the number of bytes to transfer. + */ + u32 length:24; + + /** + * This field is the address modifier to be used when a virtual function is + * requesting a data transfer. + */ + u32 address_modifier:8; + +}; + +#define SCU_SGL_ELEMENT_PAIR_A 0 +#define SCU_SGL_ELEMENT_PAIR_B 1 + +/** + * struct scu_sgl_element_pair - This structure is the SCU hardware definition + * of a pair of SGL elements. The SCU hardware always works on SGL pairs. + * They are refered to in the DS specification as SGL A and SGL B. Each SGL + * pair is followed by the address of the next pair. + * + * + */ +struct scu_sgl_element_pair { + /* OFFSET 0x60-0x68 */ + /** + * This field is the SGL element A of the SGL pair. + */ + struct scu_sgl_element A; + + /* OFFSET 0x6C-0x74 */ + /** + * This field is the SGL element B of the SGL pair. + */ + struct scu_sgl_element B; + + /* OFFSET 0x78-0x7C */ + /** + * This field is the upper 32 bits of the 64 bit address to the next SGL + * element pair. + */ + u32 next_pair_upper; + + /** + * This field is the lower 32 bits of the 64 bit address to the next SGL + * element pair. + */ + u32 next_pair_lower; + +}; + +/** + * struct transport_snapshot - This structure is the SCU hardware scratch area + * for the task context. This is set to 0 by the driver but can be read by + * issuing a dump TC request to the SCU. + * + * + */ +struct transport_snapshot { + /* OFFSET 0x48 */ + u32 xfer_rdy_write_data_length; + + /* OFFSET 0x4C */ + u32 data_offset; + + /* OFFSET 0x50 */ + u32 data_transfer_size:24; + u32 reserved_50_0:8; + + /* OFFSET 0x54 */ + u32 next_initiator_write_data_offset; + + /* OFFSET 0x58 */ + u32 next_initiator_write_data_xfer_size:24; + u32 reserved_58_0:8; +}; + +/** + * struct scu_task_context - This structure defines the contents of the SCU + * silicon task context. It lays out all of the fields according to the + * expected order and location for the Storage Controller unit. + * + * + */ +struct scu_task_context { + /* OFFSET 0x00 ------ */ + /** + * This field must be encoded to one of the valid SCU task priority values + * - SCU_TASK_PRIORITY_NORMAL + * - SCU_TASK_PRIORITY_HEAD_OF_Q + * - SCU_TASK_PRIORITY_HIGH + */ + u32 priority:2; + + /** + * This field must be set to true if this is an initiator generated request. + * Until target mode is supported all task requests are initiator requests. + */ + u32 initiator_request:1; + + /** + * This field must be set to one of the valid connection rates valid values + * are 0x8, 0x9, and 0xA. + */ + u32 connection_rate:4; + + /** + * This field muse be programed when generating an SMP response since the SMP + * connection remains open until the SMP response is generated. + */ + u32 protocol_engine_index:3; + + /** + * This field must contain the logical port for the task request. + */ + u32 logical_port_index:3; + + /** + * This field must be set to one of the SCU_TASK_CONTEXT_PROTOCOL values + * - SCU_TASK_CONTEXT_PROTOCOL_SMP + * - SCU_TASK_CONTEXT_PROTOCOL_SSP + * - SCU_TASK_CONTEXT_PROTOCOL_STP + * - SCU_TASK_CONTEXT_PROTOCOL_NONE + */ + u32 protocol_type:3; + + /** + * This filed must be set to the TCi allocated for this task + */ + u32 task_index:12; + + /** + * This field is reserved and must be set to 0x00 + */ + u32 reserved_00_0:1; + + /** + * For a normal task request this must be set to 0. If this is an abort of + * this task request it must be set to 1. + */ + u32 abort:1; + + /** + * This field must be set to true for the SCU hardware to process the task. + */ + u32 valid:1; + + /** + * This field must be set to SCU_TASK_CONTEXT_TYPE + */ + u32 context_type:1; + + /* OFFSET 0x04 */ + /** + * This field contains the RNi that is the target of this request. + */ + u32 remote_node_index:12; + + /** + * This field is programmed if this is a mirrored request, which we are not + * using, in which case it is the RNi for the mirrored target. + */ + u32 mirrored_node_index:12; + + /** + * This field is programmed with the direction of the SATA reqeust + * - SCU_SATA_WRITE_DATA_DIRECTION + * - SCU_SATA_READ_DATA_DIRECTION + */ + u32 sata_direction:1; + + /** + * This field is programmsed with one of the following SCU_COMMAND_CODE + * - SCU_COMMAND_CODE_INITIATOR_NEW_TASK + * - SCU_COMMAND_CODE_ACTIVE_TASK + * - SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK + * - SCU_COMMAND_CODE_TARGET_RAW_FRAMES + */ + u32 command_code:2; + + /** + * This field is set to true if the remote node should be suspended. + * This bit is only valid for SSP & SMP target devices. + */ + u32 suspend_node:1; + + /** + * This field is programmed with one of the following command type codes + * + * For SAS requests use the scu_ssp_task_type + * - SCU_TASK_TYPE_IOREAD + * - SCU_TASK_TYPE_IOWRITE + * - SCU_TASK_TYPE_SMP_REQUEST + * - SCU_TASK_TYPE_RESPONSE + * - SCU_TASK_TYPE_RAW_FRAME + * - SCU_TASK_TYPE_PRIMITIVE + * + * For SATA requests use the scu_sata_task_type + * - SCU_TASK_TYPE_DMA_IN + * - SCU_TASK_TYPE_FPDMAQ_READ + * - SCU_TASK_TYPE_PACKET_DMA_IN + * - SCU_TASK_TYPE_SATA_RAW_FRAME + * - SCU_TASK_TYPE_DMA_OUT + * - SCU_TASK_TYPE_FPDMAQ_WRITE + * - SCU_TASK_TYPE_PACKET_DMA_OUT + */ + u32 task_type:4; + + /* OFFSET 0x08 */ + /** + * This field is reserved and the must be set to 0x00 + */ + u32 link_layer_control:8; /* presently all reserved */ + + /** + * This field is set to true when TLR is to be enabled + */ + u32 ssp_tlr_enable:1; + + /** + * This is field specifies if the SCU DMAs a response frame to host + * memory for good response frames when operating in target mode. + */ + u32 dma_ssp_target_good_response:1; + + /** + * This field indicates if the SCU should DMA the response frame to + * host memory. + */ + u32 do_not_dma_ssp_good_response:1; + + /** + * This field is set to true when strict ordering is to be enabled + */ + u32 strict_ordering:1; + + /** + * This field indicates the type of endianess to be utilized for the + * frame. command, task, and response frames utilized control_frame + * set to 1. + */ + u32 control_frame:1; + + /** + * This field is reserved and the driver should set to 0x00 + */ + u32 tl_control_reserved:3; + + /** + * This field is set to true when the SCU hardware task timeout control is to + * be enabled + */ + u32 timeout_enable:1; + + /** + * This field is reserved and the driver should set it to 0x00 + */ + u32 pts_control_reserved:7; + + /** + * This field should be set to true when block guard is to be enabled + */ + u32 block_guard_enable:1; + + /** + * This field is reserved and the driver should set to 0x00 + */ + u32 sdma_control_reserved:7; + + /* OFFSET 0x0C */ + /** + * This field is the address modifier for this io request it should be + * programmed with the virtual function that is making the request. + */ + u32 address_modifier:16; + + /** + * @todo What we support mirrored SMP response frame? + */ + u32 mirrored_protocol_engine:3; /* mirrored protocol Engine Index */ + + /** + * If this is a mirrored request the logical port index for the mirrored RNi + * must be programmed. + */ + u32 mirrored_logical_port:4; /* mirrored local port index */ + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_0C_0:8; + + /** + * This field must be set to true if the mirrored request processing is to be + * enabled. + */ + u32 mirror_request_enable:1; /* Mirrored request Enable */ + + /* OFFSET 0x10 */ + /** + * This field is the command iu length in dwords + */ + u32 ssp_command_iu_length:8; + + /** + * This is the target TLR enable bit it must be set to 0 when creatning the + * task context. + */ + u32 xfer_ready_tlr_enable:1; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_10_0:7; + + /** + * This is the maximum burst size that the SCU hardware will send in one + * connection its value is (N x 512) and N must be a multiple of 2. If the + * value is 0x00 then maximum burst size is disabled. + */ + u32 ssp_max_burst_size:16; + + /* OFFSET 0x14 */ + /** + * This filed is set to the number of bytes to be transfered in the request. + */ + u32 transfer_length_bytes:24; /* In terms of bytes */ + + /** + * This field is reserved and the driver should set it to 0x00 + */ + u32 reserved_14_0:8; + + /* OFFSET 0x18-0x2C */ + /** + * This union provides for the protocol specif part of the SCU Task Context. + */ + union protocol_context type; + + /* OFFSET 0x30-0x34 */ + /** + * This field is the upper 32 bits of the 64 bit physical address of the + * command iu buffer + */ + u32 command_iu_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address of the + * command iu buffer + */ + u32 command_iu_lower; + + /* OFFSET 0x38-0x3C */ + /** + * This field is the upper 32 bits of the 64 bit physical address of the + * response iu buffer + */ + u32 response_iu_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address of the + * response iu buffer + */ + u32 response_iu_lower; + + /* OFFSET 0x40 */ + /** + * This field is set to the task phase of the SCU hardware. The driver must + * set this to 0x01 + */ + u32 task_phase:8; + + /** + * This field is set to the transport layer task status. The driver must set + * this to 0x00 + */ + u32 task_status:8; + + /** + * This field is used during initiator write TLR + */ + u32 previous_extended_tag:4; + + /** + * This field is set the maximum number of retries for a STP non-data FIS + */ + u32 stp_retry_count:2; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_40_1:2; + + /** + * This field is used by the SCU TL to determine when to take a snapshot when + * tranmitting read data frames. + * - 0x00 The entire IO + * - 0x01 32k + * - 0x02 64k + * - 0x04 128k + * - 0x08 256k + */ + u32 ssp_tlr_threshold:4; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_40_2:4; + + /* OFFSET 0x44 */ + u32 write_data_length; /* read only set to 0 */ + + /* OFFSET 0x48-0x58 */ + struct transport_snapshot snapshot; /* read only set to 0 */ + + /* OFFSET 0x5C */ + u32 block_protection_enable:1; + u32 block_size:2; + u32 block_protection_function:2; + u32 reserved_5C_0:9; + u32 active_sgl_element:2; /* read only set to 0 */ + u32 sgl_exhausted:1; /* read only set to 0 */ + u32 payload_data_transfer_error:4; /* read only set to 0 */ + u32 frame_buffer_offset:11; /* read only set to 0 */ + + /* OFFSET 0x60-0x7C */ + /** + * This field is the first SGL element pair found in the TC data structure. + */ + struct scu_sgl_element_pair sgl_pair_ab; + /* OFFSET 0x80-0x9C */ + /** + * This field is the second SGL element pair found in the TC data structure. + */ + struct scu_sgl_element_pair sgl_pair_cd; + + /* OFFSET 0xA0-BC */ + struct scu_sgl_element_pair sgl_snapshot_ac; + + /* OFFSET 0xC0 */ + u32 active_sgl_element_pair; /* read only set to 0 */ + + /* OFFSET 0xC4-0xCC */ + u32 reserved_C4_CC[3]; + + /* OFFSET 0xD0 */ + u32 intermediate_crc_value:16; + u32 initial_crc_seed:16; + + /* OFFSET 0xD4 */ + u32 application_tag_for_verify:16; + u32 application_tag_for_generate:16; + + /* OFFSET 0xD8 */ + u32 reference_tag_seed_for_verify_function; + + /* OFFSET 0xDC */ + u32 reserved_DC; + + /* OFFSET 0xE0 */ + u32 reserved_E0_0:16; + u32 application_tag_mask_for_generate:16; + + /* OFFSET 0xE4 */ + u32 block_protection_control:16; + u32 application_tag_mask_for_verify:16; + + /* OFFSET 0xE8 */ + u32 block_protection_error:8; + u32 reserved_E8_0:24; + + /* OFFSET 0xEC */ + u32 reference_tag_seed_for_verify; + + /* OFFSET 0xF0 */ + u32 intermediate_crc_valid_snapshot:16; + u32 reserved_F0_0:16; + + /* OFFSET 0xF4 */ + u32 reference_tag_seed_for_verify_function_snapshot; + + /* OFFSET 0xF8 */ + u32 snapshot_of_reserved_dword_DC_of_tc; + + /* OFFSET 0xFC */ + u32 reference_tag_seed_for_generate_function_snapshot; + +}; + +#endif /* _SCU_TASK_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/scu_unsolicited_frame.h b/drivers/scsi/isci/scu_unsolicited_frame.h new file mode 100644 index 0000000..187c4f0 --- /dev/null +++ b/drivers/scsi/isci/scu_unsolicited_frame.h @@ -0,0 +1,117 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This field defines the SCU format of an unsolicited frame (UF). A UF is a + * frame received by the SCU for which there is no known corresponding task + * context (TC). + * + * + */ + +#ifndef _SCU_UNSOLICITED_FRAME_H_ +#define _SCU_UNSOLICITED_FRAME_H_ + +#include + +/** + * + * + * This constant defines the number of DWORDS found the unsolicited frame + * header data member. + */ +#define SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS 15 + +/** + * struct scu_unsolicited_frame_header - + * + * This structure delineates the format of an unsolicited frame header. The + * first DWORD are UF attributes defined by the silicon architecture. The data + * depicts actual header information received on the link. + */ +struct scu_unsolicited_frame_header { + /** + * This field indicates if there is an Initiator Index Table entry with + * which this header is associated. + */ + u32 iit_exists:1; + + /** + * This field simply indicates the protocol type (i.e. SSP, STP, SMP). + */ + u32 protocol_type:3; + + /** + * This field indicates if the frame is an address frame (IAF or OAF) + * or if it is a information unit frame. + */ + u32 is_address_frame:1; + + /** + * This field simply indicates the connection rate at which the frame + * was received. + */ + u32 connection_rate:4; + + u32 reserved:23; + + /** + * This field represents the actual header data received on the link. + */ + u32 data[SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS]; + +}; + +#endif /* _SCU_UNSOLICITED_FRAME_H_ */ diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c new file mode 100644 index 0000000..8d68dcc --- /dev/null +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -0,0 +1,357 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" +#include "unsolicited_frame_control.h" +#include "registers.h" +#include "sci_util.h" + +/** + * This method will program the unsolicited frames (UFs) into the UF address + * table and construct the UF frame structure being modeled in the core. It + * will handle the case where some of the UFs are not being used and thus + * should have entries programmed to zero in the address table. + * @uf_control: This parameter specifies the unsolicted frame control object + * for which to construct the unsolicited frames objects. + * @uf_buffer_phys_address: This parameter specifies the physical address for + * the first unsolicited frame buffer. + * @uf_buffer_virt_address: This parameter specifies the virtual address for + * the first unsolicited frame buffer. + * @unused_uf_header_entries: This parameter specifies the number of unused UF + * headers. This value can be non-zero when there are a non-power of 2 + * number of unsolicited frames being supported. + * @used_uf_header_entries: This parameter specifies the number of actually + * utilized UF headers. + * + */ +static void scic_sds_unsolicited_frame_control_construct_frames( + struct scic_sds_unsolicited_frame_control *uf_control, + dma_addr_t uf_buffer_phys_address, + void *uf_buffer_virt_address, + u32 unused_uf_header_entries, + u32 used_uf_header_entries) +{ + u32 index; + struct scic_sds_unsolicited_frame *uf; + + /* + * Program the unused buffers into the UF address table and the + * controller's array of UFs. + */ + for (index = 0; index < unused_uf_header_entries; index++) { + uf = &uf_control->buffers.array[index]; + + sci_cb_make_physical_address( + uf_control->address_table.array[index], 0, 0 + ); + uf->buffer = NULL; + uf->header = &uf_control->headers.array[index]; + uf->state = UNSOLICITED_FRAME_EMPTY; + } + + /* + * Program the actual used UF buffers into the UF address table and + * the controller's array of UFs. + */ + for (index = unused_uf_header_entries; + index < unused_uf_header_entries + used_uf_header_entries; + index++) { + uf = &uf_control->buffers.array[index]; + + uf_control->address_table.array[index] = uf_buffer_phys_address; + + uf->buffer = uf_buffer_virt_address; + uf->header = &uf_control->headers.array[index]; + uf->state = UNSOLICITED_FRAME_EMPTY; + + /* + * Increment the address of the physical and virtual memory + * pointers. Everything is aligned on 1k boundary with an + * increment of 1k. + */ + uf_buffer_virt_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + uf_buffer_phys_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + } +} + +int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic) +{ + struct scic_sds_unsolicited_frame_control *uf_control = &scic->uf_control; + u32 unused_uf_header_entries; + u32 used_uf_header_entries; + u32 used_uf_buffer_bytes; + u32 unused_uf_header_bytes; + u32 used_uf_header_bytes; + dma_addr_t uf_buffer_phys_address; + void *uf_buffer_virt_address; + size_t size; + + /* + * The UF buffer address table size must be programmed to a power + * of 2. Find the first power of 2 that is equal to or greater then + * the number of unsolicited frame buffers to be utilized. + */ + uf_control->address_table.count = SCU_MIN_UF_TABLE_ENTRIES; + while (uf_control->address_table.count < uf_control->buffers.count && + uf_control->address_table.count < SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES) + uf_control->address_table.count <<= 1; + + /* + * Prepare all of the memory sizes for the UF headers, UF address + * table, and UF buffers themselves. + */ + used_uf_buffer_bytes = uf_control->buffers.count + * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + unused_uf_header_entries = uf_control->address_table.count + - uf_control->buffers.count; + used_uf_header_entries = uf_control->buffers.count; + unused_uf_header_bytes = unused_uf_header_entries + * sizeof(struct scu_unsolicited_frame_header); + used_uf_header_bytes = used_uf_header_entries + * sizeof(struct scu_unsolicited_frame_header); + + size = used_uf_buffer_bytes + used_uf_header_bytes + + uf_control->address_table.count * sizeof(dma_addr_t); + + + /* + * The Unsolicited Frame buffers are set at the start of the UF + * memory descriptor entry. The headers and address table will be + * placed after the buffers. + */ + uf_buffer_virt_address = dmam_alloc_coherent(scic_to_dev(scic), size, + &uf_buffer_phys_address, GFP_KERNEL); + if (!uf_buffer_virt_address) + return -ENOMEM; + + /* + * Program the location of the UF header table into the SCU. + * Notes: + * - The address must align on a 64-byte boundary. Guaranteed to be + * on 64-byte boundary already 1KB boundary for unsolicited frames. + * - Program unused header entries to overlap with the last + * unsolicited frame. The silicon will never DMA to these unused + * headers, since we program the UF address table pointers to + * NULL. + */ + uf_control->headers.physical_address = + uf_buffer_phys_address + + used_uf_buffer_bytes - + unused_uf_header_bytes; + + uf_control->headers.array = + uf_buffer_virt_address + + used_uf_buffer_bytes - + unused_uf_header_bytes; + + /* + * Program the location of the UF address table into the SCU. + * Notes: + * - The address must align on a 64-bit boundary. Guaranteed to be on 64 + * byte boundary already due to above programming headers being on a + * 64-bit boundary and headers are on a 64-bytes in size. + */ + uf_control->address_table.physical_address = + uf_buffer_phys_address + + used_uf_buffer_bytes + + used_uf_header_bytes; + + uf_control->address_table.array = + uf_buffer_virt_address + + used_uf_buffer_bytes + + used_uf_header_bytes; + + uf_control->get = 0; + + /* + * UF buffer requirements are: + * - The last entry in the UF queue is not NULL. + * - There is a power of 2 number of entries (NULL or not-NULL) + * programmed into the queue. + * - Aligned on a 1KB boundary. */ + + /* + * If the user provided less then the maximum amount of memory, + * then be sure that we programm the first entries in the UF + * address table to NULL. */ + scic_sds_unsolicited_frame_control_construct_frames( + uf_control, + uf_buffer_phys_address, + uf_buffer_virt_address, + unused_uf_header_entries, + used_uf_header_entries + ); + + return 0; +} + +/** + * This method returns the frame header for the specified frame index. + * @uf_control: + * @frame_index: + * @frame_header: + * + * enum sci_status + */ +enum sci_status scic_sds_unsolicited_frame_control_get_header( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header) +{ + if (frame_index < uf_control->address_table.count) { + /* + * Skip the first word in the frame since this is a controll word used + * by the hardware. */ + *frame_header = &uf_control->buffers.array[frame_index].header->data; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PARAMETER_VALUE; +} + +/** + * This method returns the frame buffer for the specified frame index. + * @uf_control: + * @frame_index: + * @frame_buffer: + * + * enum sci_status + */ +enum sci_status scic_sds_unsolicited_frame_control_get_buffer( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer) +{ + if (frame_index < uf_control->address_table.count) { + *frame_buffer = uf_control->buffers.array[frame_index].buffer; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PARAMETER_VALUE; +} + +/** + * This method releases the frame once this is done the frame is available for + * re-use by the hardware. The data contained in the frame header and frame + * buffer is no longer valid. + * @uf_control: This parameter specifies the UF control object + * @frame_index: This parameter specifies the frame index to attempt to release. + * + * This method returns an indication to the caller as to whether the + * unsolicited frame get pointer should be updated. + */ +bool scic_sds_unsolicited_frame_control_release_frame( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index) +{ + u32 frame_get; + u32 frame_cycle; + + frame_get = uf_control->get & (uf_control->address_table.count - 1); + frame_cycle = uf_control->get & uf_control->address_table.count; + + /* + * In the event there are NULL entries in the UF table, we need to + * advance the get pointer in order to find out if this frame should + * be released (i.e. update the get pointer). */ + while (((lower_32_bits(uf_control->address_table.array[frame_get]) + == 0) && + (upper_32_bits(uf_control->address_table.array[frame_get]) + == 0)) && + (frame_get < uf_control->address_table.count)) + frame_get++; + + /* + * The table has a NULL entry as it's last element. This is + * illegal. */ + BUG_ON(frame_get >= uf_control->address_table.count); + + if (frame_index < uf_control->address_table.count) { + uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED; + + /* + * The frame index is equal to the current get pointer so we + * can now free up all of the frame entries that */ + if (frame_get == frame_index) { + while ( + uf_control->buffers.array[frame_get].state + == UNSOLICITED_FRAME_RELEASED + ) { + uf_control->buffers.array[frame_get].state = UNSOLICITED_FRAME_EMPTY; + + INCREMENT_QUEUE_GET( + frame_get, + frame_cycle, + uf_control->address_table.count - 1, + uf_control->address_table.count + ); + } + + uf_control->get = + (SCU_UFQGP_GEN_BIT(ENABLE_BIT) | frame_cycle | frame_get); + + return true; + } else { + /* + * Frames remain in use until we advance the get pointer + * so there is nothing we can do here */ + } + } + + return false; +} + diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h new file mode 100644 index 0000000..0d8ca8c --- /dev/null +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -0,0 +1,251 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ +#define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ + +#include "isci.h" +#include "scu_unsolicited_frame.h" + +/** + * enum unsolicited_frame_state - + * + * This enumeration represents the current unsolicited frame state. The + * controller object can not updtate the hardware unsolicited frame put pointer + * unless it has already processed the priror unsolicited frames. + */ +enum unsolicited_frame_state { + /** + * This state is when the frame is empty and not in use. It is + * different from the released state in that the hardware could DMA + * data to this frame buffer. + */ + UNSOLICITED_FRAME_EMPTY, + + /** + * This state is set when the frame buffer is in use by by some + * object in the system. + */ + UNSOLICITED_FRAME_IN_USE, + + /** + * This state is set when the frame is returned to the free pool + * but one or more frames prior to this one are still in use. + * Once all of the frame before this one are freed it will go to + * the empty state. + */ + UNSOLICITED_FRAME_RELEASED, + + UNSOLICITED_FRAME_MAX_STATES +}; + +/** + * struct scic_sds_unsolicited_frame - + * + * This is the unsolicited frame data structure it acts as the container for + * the current frame state, frame header and frame buffer. + */ +struct scic_sds_unsolicited_frame { + /** + * This field contains the current frame state + */ + enum unsolicited_frame_state state; + + /** + * This field points to the frame header data. + */ + struct scu_unsolicited_frame_header *header; + + /** + * This field points to the frame buffer data. + */ + void *buffer; + +}; + +/** + * struct scic_sds_uf_header_array - + * + * This structure contains all of the unsolicited frame header information. + */ +struct scic_sds_uf_header_array { + /** + * This field is represents a virtual pointer to the start + * address of the UF address table. The table contains + * 64-bit pointers as required by the hardware. + */ + struct scu_unsolicited_frame_header *array; + + /** + * This field specifies the physical address location for the UF + * buffer array. + */ + dma_addr_t physical_address; + +}; + +/** + * struct scic_sds_uf_buffer_array - + * + * This structure contains all of the unsolicited frame buffer (actual payload) + * information. + */ +struct scic_sds_uf_buffer_array { + /** + * This field is the minimum number of unsolicited frames supported by the + * hardware and the number of unsolicited frames requested by the software. + */ + u32 count; + + /** + * This field is the SCIC_UNSOLICITED_FRAME data its used to manage + * the data for the unsolicited frame requests. It also represents + * the virtual address location that corresponds to the + * physical_address field. + */ + struct scic_sds_unsolicited_frame array[SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE]; + + /** + * This field specifies the physical address location for the UF + * buffer array. + */ + dma_addr_t physical_address; + +}; + +/** + * struct scic_sds_uf_address_table_array - + * + * This object maintains all of the unsolicited frame address table specific + * data. The address table is a collection of 64-bit pointers that point to + * 1KB buffers into which the silicon will DMA unsolicited frames. + */ +struct scic_sds_uf_address_table_array { + /** + * This field specifies the actual programmed size of the + * unsolicited frame buffer address table. The size of the table + * can be larger than the actual number of UF buffers, but it must + * be a power of 2 and the last entry in the table is not allowed + * to be NULL. + */ + u32 count; + + /** + * This field represents a virtual pointer that refers to the + * starting address of the UF address table. + * 64-bit pointers are required by the hardware. + */ + dma_addr_t *array; + + /** + * This field specifies the physical address location for the UF + * address table. + */ + dma_addr_t physical_address; + +}; + +/** + * struct scic_sds_unsolicited_frame_control - + * + * This object contains all of the data necessary to handle unsolicited frames. + */ +struct scic_sds_unsolicited_frame_control { + /** + * This field is the software copy of the unsolicited frame queue + * get pointer. The controller object writes this value to the + * hardware to let the hardware put more unsolicited frame entries. + */ + u32 get; + + /** + * This field contains all of the unsolicited frame header + * specific fields. + */ + struct scic_sds_uf_header_array headers; + + /** + * This field contains all of the unsolicited frame buffer + * specific fields. + */ + struct scic_sds_uf_buffer_array buffers; + + /** + * This field contains all of the unsolicited frame address table + * specific fields. + */ + struct scic_sds_uf_address_table_array address_table; + +}; + +struct scic_sds_controller; + +int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic); + +enum sci_status scic_sds_unsolicited_frame_control_get_header( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header); + +enum sci_status scic_sds_unsolicited_frame_control_get_buffer( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer); + +bool scic_sds_unsolicited_frame_control_release_frame( + struct scic_sds_unsolicited_frame_control *uf_control, + u32 frame_index); + +#endif /* _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ */ -- cgit v0.10.2 From 3bff9d54ecba84e538da822349a9a6fd6e534539 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 May 2011 22:15:10 -0700 Subject: isci: uplevel state machine unify core/sci_base_state.h and core/sci_base_state_machine.[ch] into state_machine.[ch] Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 0153b0f..cfc640f 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ remote_device.o port.o timers.o \ host.o task.o probe_roms.o \ + state_machine.o \ remote_node_context.o \ remote_node_table.o \ unsolicited_frame_control.o \ @@ -13,5 +14,4 @@ isci-objs := init.o phy.o request.o sata.o \ core/scic_sds_phy.o \ core/scic_sds_ssp_request.o \ core/scic_sds_smp_request.o \ - core/sci_base_state_machine.o \ core/sci_util.o diff --git a/drivers/scsi/isci/core/sci_base_state.h b/drivers/scsi/isci/core/sci_base_state.h deleted file mode 100644 index d64efac..0000000 --- a/drivers/scsi/isci/core/sci_base_state.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_STATE_H_ -#define _SCI_BASE_STATE_H_ - -typedef void (*sci_base_state_handler_t)(void); - -typedef void (*sci_state_transition_t)(void *base_object); - -/** - * struct sci_base_state - The base state object abstracts the fields common to - * all state objects defined in SCI. - * - * - */ -struct sci_base_state { - /** - * This field is a function pointer that defines the method to be - * invoked when the state is entered. - */ - sci_state_transition_t enter_state; - - /** - * This field is a function pointer that defines the method to be - * invoked when the state is exited. - */ - sci_state_transition_t exit_state; - -}; - -#endif /* _SCI_BASE_STATE_H_ */ diff --git a/drivers/scsi/isci/core/sci_base_state_machine.c b/drivers/scsi/isci/core/sci_base_state_machine.c deleted file mode 100644 index a704709..0000000 --- a/drivers/scsi/isci/core/sci_base_state_machine.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains all of the functionality common to all state machine - * object implementations. - * - * - */ - -#include "sci_base_state_machine.h" - -static void sci_state_machine_exit_state(struct sci_base_state_machine *sm) -{ - u32 state = sm->current_state_id; - sci_state_transition_t exit = sm->state_table[state].exit_state; - - if (exit) - exit(sm->state_machine_owner); -} - -static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) -{ - u32 state = sm->current_state_id; - sci_state_transition_t enter = sm->state_table[state].enter_state; - - if (enter) - enter(sm->state_machine_owner); -} - -/* - * ****************************************************************************** - * * P R O T E C T E D M E T H O D S - * ****************************************************************************** */ - -/** - * This method will set the initial state and state table for the state - * machine. The caller should follow this request with the initialize - * request to cause the state machine to start. - * @sm: This parameter provides the state machine object to be - * constructed. - * @state_machine_owner: This parameter indicates the object that is owns the - * state machine being constructed. - * @state_table: This parameter specifies the table of state objects that is - * managed by this state machine. - * @initial_state: This parameter specifies the value of the initial state for - * this state machine. - * - */ -void sci_base_state_machine_construct(struct sci_base_state_machine *sm, - void *owner, - const struct sci_base_state *state_table, - u32 initial_state) -{ - sm->state_machine_owner = owner; - sm->initial_state_id = initial_state; - sm->previous_state_id = initial_state; - sm->current_state_id = initial_state; - sm->state_table = state_table; -} - -/** - * This method will cause the state machine to enter the initial state. - * @sm: This parameter specifies the state machine that is to - * be started. - * - * sci_base_state_machine_construct() for how to set the initial state none - */ -void sci_base_state_machine_start(struct sci_base_state_machine *sm) -{ - sm->current_state_id = sm->initial_state_id; -#if defined(SCI_BASE_ENABLE_SUBJECT_NOTIFICATION) - sci_base_subject_notify(&sm->parent); -#endif - sci_state_machine_enter_state(sm); -} - -/** - * This method will cause the state machine to exit it's current state only. - * @sm: This parameter specifies the state machine that is to - * be stopped. - * - */ -void sci_base_state_machine_stop( - struct sci_base_state_machine *sm) -{ - sci_state_machine_exit_state(sm); -#if defined(SCI_BASE_ENABLE_SUBJECT_NOTIFICATION) - sci_base_subject_notify(&sm->parent); -#endif -} - -/** - * This method performs an update to the current state of the state machine. - * @sm: This parameter specifies the state machine for which - * the caller wishes to perform a state change. - * @next_state: This parameter specifies the new state for the state machine. - * - */ -void sci_base_state_machine_change_state( - struct sci_base_state_machine *sm, - u32 next_state) -{ - sci_state_machine_exit_state(sm); - - sm->previous_state_id = sm->current_state_id; - sm->current_state_id = next_state; - -#if defined(SCI_BASE_ENABLE_SUBJECT_NOTIFICATION) - /* Notify of the state change prior to entering the state. */ - sci_base_subject_notify(&sm->parent); -#endif - - sci_state_machine_enter_state(sm); -} - -/** - * This method simply returns the current state of the state machine to the - * caller. - * @sm: This parameter specifies the state machine for which to - * retrieve the current state. - * - * This method returns a u32 value indicating the current state for the - * supplied state machine. - */ -u32 sci_base_state_machine_get_state(struct sci_base_state_machine *sm) -{ - return sm->current_state_id; -} - diff --git a/drivers/scsi/isci/core/sci_base_state_machine.h b/drivers/scsi/isci/core/sci_base_state_machine.h deleted file mode 100644 index c0cf33b..0000000 --- a/drivers/scsi/isci/core/sci_base_state_machine.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_STATE_MACHINE_H_ -#define _SCI_BASE_STATE_MACHINE_H_ - -#include - -/** - * This file contains all structures, constants, or method declarations common - * to all state machines defined in SCI. - * - * - */ - - -#include "sci_base_state.h" - - -/** - * SET_STATE_HANDLER() - - * - * This macro simply provides simplified retrieval of an objects state handler. - */ -#define SET_STATE_HANDLER(object, table, state) \ - (object)->state_handlers = &(table)[(state)] - -/** - * struct sci_base_state_machine - This structure defines the fields common to - * all state machines. - * - * - */ -struct sci_base_state_machine { - /** - * This field points to the start of the state machine's state table. - */ - const struct sci_base_state *state_table; - - /** - * This field points to the object to which this state machine is - * associated. It serves as a cookie to be provided to the state - * enter/exit methods. - */ - void *state_machine_owner; - - /** - * This field simply indicates the state value for the state machine's - * initial state. - */ - u32 initial_state_id; - - /** - * This field indicates the current state of the state machine. - */ - u32 current_state_id; - - /** - * This field indicates the previous state of the state machine. - */ - u32 previous_state_id; - -}; - -/* - * ****************************************************************************** - * * P R O T E C T E D M E T H O D S - * ****************************************************************************** */ - -void sci_base_state_machine_construct( - struct sci_base_state_machine *this_state_machine, - void *state_machine_owner, - const struct sci_base_state *state_table, - u32 initial_state); - -void sci_base_state_machine_start( - struct sci_base_state_machine *this_state_machine); - -void sci_base_state_machine_stop( - struct sci_base_state_machine *this_state_machine); - -void sci_base_state_machine_change_state( - struct sci_base_state_machine *this_state_machine, - u32 next_state); - -u32 sci_base_state_machine_get_state( - struct sci_base_state_machine *this_state_machine); - -#endif /* _SCI_BASE_STATE_MACHINE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index c82ccb9..6b49d94 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -56,8 +56,7 @@ #include #include "sas.h" #include "host.h" -#include "sci_base_state.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" #include "scic_phy.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h index 472718d..0d7bab3 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ b/drivers/scsi/isci/core/scic_sds_phy.h @@ -59,7 +59,7 @@ #include "sas.h" #include "scic_phy.h" #include "registers.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" #include struct scic_sds_port; diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h index 4b28c5a..a351525 100644 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ b/drivers/scsi/isci/core/scic_sds_port.h @@ -60,7 +60,7 @@ #include "isci.h" #include "sas.h" #include "registers.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" struct scic_sds_controller; struct scic_sds_phy; diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h index 5ce7ff2..a8d74a1 100644 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ b/drivers/scsi/isci/core/scic_sds_request.h @@ -58,7 +58,7 @@ #include "isci.h" #include "scic_io_request.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" #include "scu_task_context.h" #include "scic_sds_stp_request.h" #include "sas.h" diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 7f33894..6a2b65b 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -54,7 +54,7 @@ */ #include -#include "sci_base_state_machine.h" +#include "state_machine.h" #include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_smp_request.h" diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c index 137f6dd..3fdf68b 100644 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ b/drivers/scsi/isci/core/scic_sds_ssp_request.c @@ -54,7 +54,7 @@ */ #include "host.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" #include "scic_sds_request.h" #include "scu_completion_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h index d0ae590..e015a11 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h +++ b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h @@ -56,7 +56,6 @@ #ifndef _SCIC_SDS_SATA_PIO_REQUEST_H_ #define _SCIC_SDS_SATA_PIO_REQUEST_H_ -#include "sci_base_state.h" #include "scic_sds_request.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index 9a787e2..308f486 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -55,8 +55,7 @@ #include #include "sas.h" -#include "sci_base_state.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" #include "scic_io_request.h" #include "remote_device.h" #include "scic_sds_request.h" diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 64edac8..9c5d121 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -59,7 +59,7 @@ #include "remote_device.h" #include "phy.h" #include "pool.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" #include "remote_node_table.h" #include "registers.h" #include "scu_unsolicited_frame.h" diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index af47593..5891f3d 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -54,7 +54,7 @@ */ #include "host.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index 540a49a..a763468 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -64,8 +64,7 @@ * */ -#include "sci_base_state.h" -#include "sci_base_state_machine.h" +#include "state_machine.h" /** * diff --git a/drivers/scsi/isci/state_machine.c b/drivers/scsi/isci/state_machine.c new file mode 100644 index 0000000..6057782 --- /dev/null +++ b/drivers/scsi/isci/state_machine.c @@ -0,0 +1,171 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains all of the functionality common to all state machine + * object implementations. + * + * + */ + +#include "state_machine.h" + +static void sci_state_machine_exit_state(struct sci_base_state_machine *sm) +{ + u32 state = sm->current_state_id; + sci_state_transition_t exit = sm->state_table[state].exit_state; + + if (exit) + exit(sm->state_machine_owner); +} + +static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) +{ + u32 state = sm->current_state_id; + sci_state_transition_t enter = sm->state_table[state].enter_state; + + if (enter) + enter(sm->state_machine_owner); +} + +/* + * ****************************************************************************** + * * P R O T E C T E D M E T H O D S + * ****************************************************************************** */ + +/** + * This method will set the initial state and state table for the state + * machine. The caller should follow this request with the initialize + * request to cause the state machine to start. + * @sm: This parameter provides the state machine object to be + * constructed. + * @state_machine_owner: This parameter indicates the object that is owns the + * state machine being constructed. + * @state_table: This parameter specifies the table of state objects that is + * managed by this state machine. + * @initial_state: This parameter specifies the value of the initial state for + * this state machine. + * + */ +void sci_base_state_machine_construct(struct sci_base_state_machine *sm, + void *owner, + const struct sci_base_state *state_table, + u32 initial_state) +{ + sm->state_machine_owner = owner; + sm->initial_state_id = initial_state; + sm->previous_state_id = initial_state; + sm->current_state_id = initial_state; + sm->state_table = state_table; +} + +/** + * This method will cause the state machine to enter the initial state. + * @sm: This parameter specifies the state machine that is to + * be started. + * + * sci_base_state_machine_construct() for how to set the initial state none + */ +void sci_base_state_machine_start(struct sci_base_state_machine *sm) +{ + sm->current_state_id = sm->initial_state_id; + sci_state_machine_enter_state(sm); +} + +/** + * This method will cause the state machine to exit it's current state only. + * @sm: This parameter specifies the state machine that is to + * be stopped. + * + */ +void sci_base_state_machine_stop( + struct sci_base_state_machine *sm) +{ + sci_state_machine_exit_state(sm); +} + +/** + * This method performs an update to the current state of the state machine. + * @sm: This parameter specifies the state machine for which + * the caller wishes to perform a state change. + * @next_state: This parameter specifies the new state for the state machine. + * + */ +void sci_base_state_machine_change_state( + struct sci_base_state_machine *sm, + u32 next_state) +{ + sci_state_machine_exit_state(sm); + + sm->previous_state_id = sm->current_state_id; + sm->current_state_id = next_state; + + sci_state_machine_enter_state(sm); +} + +/** + * This method simply returns the current state of the state machine to the + * caller. + * @sm: This parameter specifies the state machine for which to + * retrieve the current state. + * + * This method returns a u32 value indicating the current state for the + * supplied state machine. + */ +u32 sci_base_state_machine_get_state(struct sci_base_state_machine *sm) +{ + return sm->current_state_id; +} + diff --git a/drivers/scsi/isci/state_machine.h b/drivers/scsi/isci/state_machine.h new file mode 100644 index 0000000..c29eb427 --- /dev/null +++ b/drivers/scsi/isci/state_machine.h @@ -0,0 +1,155 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_BASE_STATE_MACHINE_H_ +#define _SCI_BASE_STATE_MACHINE_H_ + +#include + +typedef void (*sci_base_state_handler_t)(void); + +typedef void (*sci_state_transition_t)(void *base_object); + +/** + * struct sci_base_state - The base state object abstracts the fields common to + * all state objects defined in SCI. + * + * + */ +struct sci_base_state { + /** + * This field is a function pointer that defines the method to be + * invoked when the state is entered. + */ + sci_state_transition_t enter_state; + + /** + * This field is a function pointer that defines the method to be + * invoked when the state is exited. + */ + sci_state_transition_t exit_state; + +}; + +/** + * SET_STATE_HANDLER() - + * + * This macro simply provides simplified retrieval of an objects state handler. + */ +#define SET_STATE_HANDLER(object, table, state) \ + (object)->state_handlers = &(table)[(state)] + +/** + * struct sci_base_state_machine - This structure defines the fields common to + * all state machines. + * + * + */ +struct sci_base_state_machine { + /** + * This field points to the start of the state machine's state table. + */ + const struct sci_base_state *state_table; + + /** + * This field points to the object to which this state machine is + * associated. It serves as a cookie to be provided to the state + * enter/exit methods. + */ + void *state_machine_owner; + + /** + * This field simply indicates the state value for the state machine's + * initial state. + */ + u32 initial_state_id; + + /** + * This field indicates the current state of the state machine. + */ + u32 current_state_id; + + /** + * This field indicates the previous state of the state machine. + */ + u32 previous_state_id; + +}; + +/* + * ****************************************************************************** + * * P R O T E C T E D M E T H O D S + * ****************************************************************************** */ + +void sci_base_state_machine_construct( + struct sci_base_state_machine *this_state_machine, + void *state_machine_owner, + const struct sci_base_state *state_table, + u32 initial_state); + +void sci_base_state_machine_start( + struct sci_base_state_machine *this_state_machine); + +void sci_base_state_machine_stop( + struct sci_base_state_machine *this_state_machine); + +void sci_base_state_machine_change_state( + struct sci_base_state_machine *this_state_machine, + u32 next_state); + +u32 sci_base_state_machine_get_state( + struct sci_base_state_machine *this_state_machine); + +#endif /* _SCI_BASE_STATE_MACHINE_H_ */ -- cgit v0.10.2 From f1f52e75939b56c40b3d153ae99faf2720250242 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2011 02:28:45 -0700 Subject: isci: uplevel request infrastructure * Consolidate tiny header files * Move files out of core/ (drop core/scic_sds_ prefix) * Merge core/scic_sds_request.[ch] into request.[ch] * Cleanup request.c namespace (clean forward declarations and global namespace pollution) Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index cfc640f..a7d1eb3 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -7,11 +7,9 @@ isci-objs := init.o phy.o request.o sata.o \ remote_node_context.o \ remote_node_table.o \ unsolicited_frame_control.o \ - core/scic_sds_request.o \ - core/scic_sds_stp_request.o \ + stp_request.o \ + ssp_request.o \ + smp_request.o \ core/scic_sds_port.o \ core/scic_sds_port_configuration_agent.o \ core/scic_sds_phy.o \ - core/scic_sds_ssp_request.o \ - core/scic_sds_smp_request.o \ - core/sci_util.o diff --git a/drivers/scsi/isci/core/sci_util.c b/drivers/scsi/isci/core/sci_util.c deleted file mode 100644 index 595d8da..0000000 --- a/drivers/scsi/isci/core/sci_util.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "sci_util.h" -#include "request.h" - -void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) -{ - struct isci_request *ireq = sci_req_to_ireq(sci_req); - dma_addr_t offset; - - BUG_ON(phys_addr < ireq->request_daddr); - - offset = phys_addr - ireq->request_daddr; - - BUG_ON(offset >= sizeof(*ireq)); - - return (char *)ireq + offset; -} - -dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sds_request, - void *virt_addr) -{ - struct isci_request *isci_request = sci_req_to_ireq(sds_request); - - char *requested_addr = (char *)virt_addr; - char *base_addr = (char *)isci_request; - - BUG_ON(requested_addr < base_addr); - BUG_ON((requested_addr - base_addr) >= sizeof(*isci_request)); - - return isci_request->request_daddr + (requested_addr - base_addr); -} diff --git a/drivers/scsi/isci/core/sci_util.h b/drivers/scsi/isci/core/sci_util.h deleted file mode 100644 index 0f9dd0f..0000000 --- a/drivers/scsi/isci/core/sci_util.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_UTIL_H_ -#define _SCI_UTIL_H_ - -#include "scic_sds_request.h" - -#define SCIC_BUILD_DWORD(char_buffer) \ - (\ - ((char_buffer)[0] << 24) \ - | ((char_buffer)[1] << 16) \ - | ((char_buffer)[2] << 8) \ - | ((char_buffer)[3]) \ - ) - -#define sci_cb_make_physical_address(physical_addr, addr_upper, addr_lower) \ - ((physical_addr) = (addr_lower) | ((u64)addr_upper) << 32) - -/** - * sci_swab32_cpy - convert between scsi and scu-hardware byte format - * @dest: receive the 4-byte endian swapped version of src - * @src: word aligned source buffer - * - * scu hardware handles SSP/SMP control, response, and unidentified - * frames in "big endian dword" order. Regardless of host endian this - * is always a swab32()-per-dword conversion of the standard definition, - * i.e. single byte fields swapped and multi-byte fields in little- - * endian - */ -static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt) -{ - u32 *dest = _dest, *src = _src; - - while (--word_cnt >= 0) - dest[word_cnt] = swab32(src[word_cnt]); -} - -void *scic_request_get_virt_addr(struct scic_sds_request *sds_request, - dma_addr_t phys_addr); - -dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sds_request, - void *virt_addr); - -#endif /* _SCI_UTIL_H_ */ diff --git a/drivers/scsi/isci/core/scic_io_request.h b/drivers/scsi/isci/core/scic_io_request.h deleted file mode 100644 index a4664cc3..0000000 --- a/drivers/scsi/isci/core/scic_io_request.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_IO_REQUEST_H_ -#define _SCIC_IO_REQUEST_H_ - -#include - -struct scic_sds_request; -struct scic_sds_remote_device; -struct scic_sds_controller; - -/** - * This enumeration specifies the transport protocol utilized for the request. - * - * - */ -typedef enum { - /** - * This enumeration constant indicates that no protocol has yet been - * set. - */ - SCIC_NO_PROTOCOL, - - /** - * This enumeration constant indicates that the protocol utilized - * is the Serial Management Protocol. - */ - SCIC_SMP_PROTOCOL, - - /** - * This enumeration constant indicates that the protocol utilized - * is the Serial SCSI Protocol. - */ - SCIC_SSP_PROTOCOL, - - /** - * This enumeration constant indicates that the protocol utilized - * is the Serial-ATA Tunneling Protocol. - */ - SCIC_STP_PROTOCOL - -} SCIC_TRANSPORT_PROTOCOL; - -enum sci_status scic_io_request_construct( - struct scic_sds_controller *scic_controller, - struct scic_sds_remote_device *scic_remote_device, - u16 io_tag, struct scic_sds_request *sci_req); - -/** - * scic_io_request_construct_basic_ssp() - This method is called by the SCI - * user to build an SSP IO request. - * @scic_io_request: This parameter specifies the handle to the io request - * object to be built. - * - * - The user must have previously called scic_io_request_construct() on the - * supplied IO request. Indicate if the controller successfully built the IO - * request. SCI_SUCCESS This value is returned if the IO request was - * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned - * if the remote_device does not support the SSP protocol. - * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not - * properly set the association between the SCIC IO request and the user's IO - * request. - */ -enum sci_status scic_io_request_construct_basic_ssp( - struct scic_sds_request *scic_io_request); - - - - - -/** - * scic_io_request_construct_basic_sata() - This method is called by the SCI - * Core user to build an STP IO request. - * @scic_io_request: This parameter specifies the handle to the io request - * object to be built. - * - * - The user must have previously called scic_io_request_construct() on the - * supplied IO request. Indicate if the controller successfully built the IO - * request. SCI_SUCCESS This value is returned if the IO request was - * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned - * if the remote_device does not support the STP protocol. - * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not - * properly set the association between the SCIC IO request and the user's IO - * request. - */ -enum sci_status scic_io_request_construct_basic_sata( - struct scic_sds_request *scic_io_request); - - - - -/** - * scic_io_request_construct_smp() - This method is called by the SCI user to - * build an SMP IO request. - * @scic_io_request: This parameter specifies the handle to the io request - * object to be built. - * - * - The user must have previously called scic_io_request_construct() on the - * supplied IO request. Indicate if the controller successfully built the IO - * request. SCI_SUCCESS This value is returned if the IO request was - * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned - * if the remote_device does not support the SMP protocol. - * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not - * properly set the association between the SCIC IO request and the user's IO - * request. - */ -enum sci_status scic_io_request_construct_smp( - struct scic_sds_request *scic_io_request); - - - -/** - * scic_request_get_controller_status() - This method returns the controller - * specific IO/Task request status. These status values are unique to the - * specific controller being managed by the SCIC. - * @io_request: the handle to the IO or task management request object for - * which to retrieve the status. - * - * This method returns a value indicating the controller specific request - * status. - */ -u32 scic_request_get_controller_status( - struct scic_sds_request *io_request); - -/** - * scic_io_request_get_io_tag() - This method will return the IO tag utilized - * by the IO request. - * @scic_io_request: This parameter specifies the handle to the io request - * object for which to return the IO tag. - * - * An unsigned integer representing the IO tag being utilized. - * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if the IO does not - * currently have an IO tag allocated to it. All return other values indicate a - * legitimate tag. - */ -u16 scic_io_request_get_io_tag( - struct scic_sds_request *scic_io_request); - - -/** - * scic_stp_io_request_set_ncq_tag() - This method will assign an NCQ tag to - * the io request object. The caller of this function must make sure that - * only valid NCQ tags are assigned to the io request object. - * @scic_io_request: This parameter specifies the handle to the io request - * object to which to assign the ncq tag. - * @ncq_tag: This parameter specifies the NCQ tag to be utilized for the - * supplied core IO request. It is up to the user to make sure that this is - * a valid NCQ tag. - * - * none This function is only valid for SATA NCQ requests. - */ -void scic_stp_io_request_set_ncq_tag( - struct scic_sds_request *scic_io_request, - u16 ncq_tag); - -/** - * scic_io_request_get_number_of_bytes_transferred() - This method will return - * the number of bytes transferred from the SCU - * @scic_io_request: This parameter specifies the handle to the io request - * whose data length was not eqaul to the data length specified in the - * request. When the driver gets an early io completion status from the - * hardware, this routine should be called to get the actual number of bytes - * transferred - * - * The return is the number of bytes transferred when the data legth is not - * equal to the specified length in the io request - */ -u32 scic_io_request_get_number_of_bytes_transferred( - struct scic_sds_request *scic_io_request); - - -#endif /* _SCIC_IO_REQUEST_H_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 6b49d94..150509b 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -61,7 +61,6 @@ #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" -#include "sci_util.h" #include "scu_event_codes.h" #include "timers.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index 652917e..a9f3ce1 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -60,9 +60,9 @@ #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" -#include "scic_sds_request.h" #include "registers.h" #include "timers.h" +#include "scu_task_context.h" #define SCIC_SDS_PORT_MIN_TIMER_COUNT (SCI_MAX_PORTS) #define SCIC_SDS_PORT_MAX_TIMER_COUNT (SCI_MAX_PORTS) diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c deleted file mode 100644 index cd27960..0000000 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ /dev/null @@ -1,1523 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "scic_io_request.h" -#include "registers.h" -#include "scic_sds_port.h" -#include "remote_device.h" -#include "scic_sds_request.h" -#include "scic_sds_smp_request.h" -#include "scic_sds_stp_request.h" -#include "unsolicited_frame_control.h" -#include "sci_util.h" -#include "scu_completion_codes.h" -#include "scu_task_context.h" -#include "request.h" -#include "task.h" - -/* - * **************************************************************************** - * * SCIC SDS IO REQUEST CONSTANTS - * **************************************************************************** */ - -/** - * - * - * We have no timer requirements for IO requests right now - */ -#define SCIC_SDS_IO_REQUEST_MINIMUM_TIMER_COUNT (0) -#define SCIC_SDS_IO_REQUEST_MAXIMUM_TIMER_COUNT (0) - -/** - * This method returns the sgl element pair for the specificed sgl_pair index. - * @sci_req: This parameter specifies the IO request for which to retrieve - * the Scatter-Gather List element pair. - * @sgl_pair_index: This parameter specifies the index into the SGL element - * pair to be retrieved. - * - * This method returns a pointer to an struct scu_sgl_element_pair. - */ -static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( - struct scic_sds_request *sci_req, - u32 sgl_pair_index - ) { - struct scu_task_context *task_context; - - task_context = (struct scu_task_context *)sci_req->task_context_buffer; - - if (sgl_pair_index == 0) { - return &task_context->sgl_pair_ab; - } else if (sgl_pair_index == 1) { - return &task_context->sgl_pair_cd; - } - - return &sci_req->sg_table[sgl_pair_index - 2]; -} - -/** - * This function will build the SGL list for an IO request. - * @sci_req: This parameter specifies the IO request for which to build - * the Scatter-Gather List. - * - */ -void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) -{ - struct isci_request *isci_request = sci_req_to_ireq(sds_request); - struct isci_host *isci_host = isci_request->isci_host; - struct sas_task *task = isci_request_access_task(isci_request); - struct scatterlist *sg = NULL; - dma_addr_t dma_addr; - u32 sg_idx = 0; - struct scu_sgl_element_pair *scu_sg = NULL; - struct scu_sgl_element_pair *prev_sg = NULL; - - if (task->num_scatter > 0) { - sg = task->scatter; - - while (sg) { - scu_sg = scic_sds_request_get_sgl_element_pair( - sds_request, - sg_idx); - - SCU_SGL_COPY(scu_sg->A, sg); - - sg = sg_next(sg); - - if (sg) { - SCU_SGL_COPY(scu_sg->B, sg); - sg = sg_next(sg); - } else - SCU_SGL_ZERO(scu_sg->B); - - if (prev_sg) { - dma_addr = - scic_io_request_get_dma_addr( - sds_request, - scu_sg); - - prev_sg->next_pair_upper = - upper_32_bits(dma_addr); - prev_sg->next_pair_lower = - lower_32_bits(dma_addr); - } - - prev_sg = scu_sg; - sg_idx++; - } - } else { /* handle when no sg */ - scu_sg = scic_sds_request_get_sgl_element_pair(sds_request, - sg_idx); - - dma_addr = dma_map_single(&isci_host->pdev->dev, - task->scatter, - task->total_xfer_len, - task->data_dir); - - isci_request->zero_scatter_daddr = dma_addr; - - scu_sg->A.length = task->total_xfer_len; - scu_sg->A.address_upper = upper_32_bits(dma_addr); - scu_sg->A.address_lower = lower_32_bits(dma_addr); - } - - if (scu_sg) { - scu_sg->next_pair_upper = 0; - scu_sg->next_pair_lower = 0; - } -} - -static void scic_sds_ssp_io_request_assign_buffers(struct scic_sds_request *sci_req) -{ - if (sci_req->was_tag_assigned_by_user == false) - sci_req->task_context_buffer = &sci_req->tc; -} - -static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req) -{ - struct ssp_cmd_iu *cmd_iu; - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(ireq); - - cmd_iu = &sci_req->ssp.cmd; - - memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8); - cmd_iu->add_cdb_len = 0; - cmd_iu->_r_a = 0; - cmd_iu->_r_b = 0; - cmd_iu->en_fburst = 0; /* unsupported */ - cmd_iu->task_prio = task->ssp_task.task_prio; - cmd_iu->task_attr = task->ssp_task.task_attr; - cmd_iu->_r_c = 0; - - sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cdb, - sizeof(task->ssp_task.cdb) / sizeof(u32)); -} - -static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci_req) -{ - struct ssp_task_iu *task_iu; - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(ireq); - struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - - task_iu = &sci_req->ssp.tmf; - - memset(task_iu, 0, sizeof(struct ssp_task_iu)); - - memcpy(task_iu->LUN, task->ssp_task.LUN, 8); - - task_iu->task_func = isci_tmf->tmf_code; - task_iu->task_tag = - (ireq->ttype == tmf_task) ? - isci_tmf->io_tag : - SCI_CONTROLLER_INVALID_IO_TAG; -} - -/** - * This method is will fill in the SCU Task Context for any type of SSP request. - * @sci_req: - * @task_context: - * - */ -static void scu_ssp_reqeust_construct_task_context( - struct scic_sds_request *sds_request, - struct scu_task_context *task_context) -{ - dma_addr_t dma_addr; - struct scic_sds_controller *controller; - struct scic_sds_remote_device *target_device; - struct scic_sds_port *target_port; - - controller = scic_sds_request_get_controller(sds_request); - target_device = scic_sds_request_get_device(sds_request); - target_port = scic_sds_request_get_port(sds_request); - - /* Fill in the TC with the its required data */ - task_context->abort = 0; - task_context->priority = 0; - task_context->initiator_request = 1; - task_context->connection_rate = target_device->connection_rate; - task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(controller); - task_context->logical_port_index = - scic_sds_port_get_index(target_port); - task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; - task_context->valid = SCU_TASK_CONTEXT_VALID; - task_context->context_type = SCU_TASK_CONTEXT_TYPE; - - task_context->remote_node_index = - scic_sds_remote_device_get_index(sds_request->target_device); - task_context->command_code = 0; - - task_context->link_layer_control = 0; - task_context->do_not_dma_ssp_good_response = 1; - task_context->strict_ordering = 0; - task_context->control_frame = 0; - task_context->timeout_enable = 0; - task_context->block_guard_enable = 0; - - task_context->address_modifier = 0; - - /* task_context->type.ssp.tag = sci_req->io_tag; */ - task_context->task_phase = 0x01; - - if (sds_request->was_tag_assigned_by_user) { - /* - * Build the task context now since we have already read - * the data - */ - sds_request->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sds_request->io_tag)); - } else { - /* - * Build the task context now since we have already read - * the data - * - * I/O tag index is not assigned because we have to wait - * until we get a TCi - */ - sds_request->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - owning_controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); - } - - /* - * Copy the physical address for the command buffer to the - * SCU Task Context - */ - dma_addr = scic_io_request_get_dma_addr(sds_request, - &sds_request->ssp.cmd); - - task_context->command_iu_upper = upper_32_bits(dma_addr); - task_context->command_iu_lower = lower_32_bits(dma_addr); - - /* - * Copy the physical address for the response buffer to the - * SCU Task Context - */ - dma_addr = scic_io_request_get_dma_addr(sds_request, - &sds_request->ssp.rsp); - - task_context->response_iu_upper = upper_32_bits(dma_addr); - task_context->response_iu_lower = lower_32_bits(dma_addr); -} - -/** - * This method is will fill in the SCU Task Context for a SSP IO request. - * @sci_req: - * - */ -static void scu_ssp_io_request_construct_task_context( - struct scic_sds_request *sci_req, - enum dma_data_direction dir, - u32 len) -{ - struct scu_task_context *task_context; - - task_context = scic_sds_request_get_task_context(sci_req); - - scu_ssp_reqeust_construct_task_context(sci_req, task_context); - - task_context->ssp_command_iu_length = - sizeof(struct ssp_cmd_iu) / sizeof(u32); - task_context->type.ssp.frame_type = SSP_COMMAND; - - switch (dir) { - case DMA_FROM_DEVICE: - case DMA_NONE: - default: - task_context->task_type = SCU_TASK_TYPE_IOREAD; - break; - case DMA_TO_DEVICE: - task_context->task_type = SCU_TASK_TYPE_IOWRITE; - break; - } - - task_context->transfer_length_bytes = len; - - if (task_context->transfer_length_bytes > 0) - scic_sds_request_build_sgl(sci_req); -} - -static void scic_sds_ssp_task_request_assign_buffers(struct scic_sds_request *sci_req) -{ - if (sci_req->was_tag_assigned_by_user == false) - sci_req->task_context_buffer = &sci_req->tc; -} - -/** - * This method will fill in the SCU Task Context for a SSP Task request. The - * following important settings are utilized: -# priority == - * SCU_TASK_PRIORITY_HIGH. This ensures that the task request is issued - * ahead of other task destined for the same Remote Node. -# task_type == - * SCU_TASK_TYPE_IOREAD. This simply indicates that a normal request type - * (i.e. non-raw frame) is being utilized to perform task management. -# - * control_frame == 1. This ensures that the proper endianess is set so - * that the bytes are transmitted in the right order for a task frame. - * @sci_req: This parameter specifies the task request object being - * constructed. - * - */ -static void scu_ssp_task_request_construct_task_context( - struct scic_sds_request *sci_req) -{ - struct scu_task_context *task_context; - - task_context = scic_sds_request_get_task_context(sci_req); - - scu_ssp_reqeust_construct_task_context(sci_req, task_context); - - task_context->control_frame = 1; - task_context->priority = SCU_TASK_PRIORITY_HIGH; - task_context->task_type = SCU_TASK_TYPE_RAW_FRAME; - task_context->transfer_length_bytes = 0; - task_context->type.ssp.frame_type = SSP_TASK; - task_context->ssp_command_iu_length = - sizeof(struct ssp_task_iu) / sizeof(u32); -} - - -/** - * This method constructs the SSP Command IU data for this ssp passthrough - * comand request object. - * @sci_req: This parameter specifies the request object for which the SSP - * command information unit is being built. - * - * enum sci_status, returns invalid parameter is cdb > 16 - */ - - -/** - * This method constructs the SATA request object. - * @sci_req: - * @sat_protocol: - * @transfer_length: - * @data_direction: - * @copy_rx_frame: - * - * enum sci_status - */ -static enum sci_status -scic_io_request_construct_sata(struct scic_sds_request *sci_req, - u32 len, - enum dma_data_direction dir, - bool copy) -{ - enum sci_status status = SCI_SUCCESS; - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(ireq); - - /* check for management protocols */ - if (ireq->ttype == tmf_task) { - struct isci_tmf *tmf = isci_request_access_tmf(ireq); - - if (tmf->tmf_code == isci_tmf_sata_srst_high || - tmf->tmf_code == isci_tmf_sata_srst_low) - return scic_sds_stp_soft_reset_request_construct(sci_req); - else { - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: Request 0x%p received un-handled SAT " - "management protocol 0x%x.\n", - __func__, sci_req, tmf->tmf_code); - - return SCI_FAILURE; - } - } - - if (!sas_protocol_ata(task->task_proto)) { - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: Non-ATA protocol in SATA path: 0x%x\n", - __func__, - task->task_proto); - return SCI_FAILURE; - - } - - /* non data */ - if (task->data_dir == DMA_NONE) - return scic_sds_stp_non_data_request_construct(sci_req); - - /* NCQ */ - if (task->ata_task.use_ncq) - return scic_sds_stp_ncq_request_construct(sci_req, len, dir); - - /* DMA */ - if (task->ata_task.dma_xfer) - return scic_sds_stp_udma_request_construct(sci_req, len, dir); - else /* PIO */ - return scic_sds_stp_pio_request_construct(sci_req, copy); - - return status; -} - -enum sci_status scic_io_request_construct_basic_ssp( - struct scic_sds_request *sci_req) -{ - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(ireq); - - sci_req->protocol = SCIC_SSP_PROTOCOL; - - scu_ssp_io_request_construct_task_context(sci_req, - task->data_dir, - task->total_xfer_len); - - scic_sds_io_request_build_ssp_command_iu(sci_req); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); - - return SCI_SUCCESS; -} - - -enum sci_status scic_task_request_construct_ssp( - struct scic_sds_request *sci_req) -{ - /* Construct the SSP Task SCU Task Context */ - scu_ssp_task_request_construct_task_context(sci_req); - - /* Fill in the SSP Task IU */ - scic_sds_task_request_build_ssp_task_iu(sci_req); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); - - return SCI_SUCCESS; -} - - -enum sci_status scic_io_request_construct_basic_sata( - struct scic_sds_request *sci_req) -{ - enum sci_status status; - struct scic_sds_stp_request *stp_req; - bool copy = false; - struct isci_request *isci_request = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(isci_request); - - stp_req = &sci_req->stp.req; - sci_req->protocol = SCIC_STP_PROTOCOL; - - copy = (task->data_dir == DMA_NONE) ? false : true; - - status = scic_io_request_construct_sata(sci_req, - task->total_xfer_len, - task->data_dir, - copy); - - if (status == SCI_SUCCESS) - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); - - return status; -} - - -enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req) -{ - enum sci_status status = SCI_SUCCESS; - struct isci_request *ireq = sci_req_to_ireq(sci_req); - - /* check for management protocols */ - if (ireq->ttype == tmf_task) { - struct isci_tmf *tmf = isci_request_access_tmf(ireq); - - if (tmf->tmf_code == isci_tmf_sata_srst_high || - tmf->tmf_code == isci_tmf_sata_srst_low) { - status = scic_sds_stp_soft_reset_request_construct(sci_req); - } else { - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: Request 0x%p received un-handled SAT " - "Protocol 0x%x.\n", - __func__, sci_req, tmf->tmf_code); - - return SCI_FAILURE; - } - } - - if (status == SCI_SUCCESS) - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); - - return status; -} - - -u16 scic_io_request_get_io_tag( - struct scic_sds_request *sci_req) -{ - return sci_req->io_tag; -} - - -u32 scic_request_get_controller_status( - struct scic_sds_request *sci_req) -{ - return sci_req->scu_status; -} - -#define SCU_TASK_CONTEXT_SRAM 0x200000 -u32 scic_io_request_get_number_of_bytes_transferred( - struct scic_sds_request *scic_sds_request) -{ - struct scic_sds_controller *scic = scic_sds_request->owning_controller; - u32 ret_val = 0; - - if (readl(&scic->smu_registers->address_modifier) == 0) { - void __iomem *scu_reg_base = scic->scu_registers; - /* - * get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where - * BAR1 is the scu_registers - * 0x20002C = 0x200000 + 0x2c - * = start of task context SRAM + offset of (type.ssp.data_offset) - * TCi is the io_tag of struct scic_sds_request */ - ret_val = readl(scu_reg_base + - (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + - ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(scic_sds_request->io_tag))); - } - - return ret_val; -} - - -/* - * **************************************************************************** - * * SCIC SDS Interface Implementation - * **************************************************************************** */ - -enum sci_status -scic_sds_request_start(struct scic_sds_request *request) -{ - if (request->device_sequence != - scic_sds_remote_device_get_sequence(request->target_device)) - return SCI_FAILURE; - - if (request->state_handlers->start_handler) - return request->state_handlers->start_handler(request); - - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to start while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status -scic_sds_io_request_terminate(struct scic_sds_request *request) -{ - if (request->state_handlers->abort_handler) - return request->state_handlers->abort_handler(request); - - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to abort while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status -scic_sds_io_request_complete(struct scic_sds_request *request) -{ - if (request->state_handlers->complete_handler) - return request->state_handlers->complete_handler(request); - - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to complete while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status scic_sds_io_request_event_handler( - struct scic_sds_request *request, - u32 event_code) -{ - if (request->state_handlers->event_handler) - return request->state_handlers->event_handler(request, event_code); - - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given event code notification %x while " - "in wrong state %d\n", - __func__, - event_code, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status -scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code) -{ - if (request->state_machine.current_state_id == SCI_BASE_REQUEST_STATE_STARTED && - request->has_started_substate_machine == false) - return scic_sds_request_started_state_tc_completion_handler(request, completion_code); - else if (request->state_handlers->tc_completion_handler) - return request->state_handlers->tc_completion_handler(request, completion_code); - - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given task completion notification %x " - "while in wrong state %d\n", - __func__, - completion_code, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; - -} - - -/** - * - * @sci_req: The SCIC_SDS_IO_REQUEST_T object for which the start - * operation is to be executed. - * @frame_index: The frame index returned by the hardware for the reqeust - * object. - * - * This method invokes the core state frame handler for the - * SCIC_SDS_IO_REQUEST_T object. enum sci_status - */ -enum sci_status scic_sds_io_request_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - if (request->state_handlers->frame_handler) - return request->state_handlers->frame_handler(request, frame_index); - - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given unexpected frame %x while in " - "state %d\n", - __func__, - frame_index, - sci_base_state_machine_get_state(&request->state_machine)); - - scic_sds_controller_release_frame(request->owning_controller, frame_index); - return SCI_FAILURE_INVALID_STATE; -} - -/* - * This function copies response data for requests returning response data - * instead of sense data. - * @sci_req: This parameter specifies the request object for which to copy - * the response data. - */ -void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) -{ - void *resp_buf; - u32 len; - struct ssp_response_iu *ssp_response; - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - - ssp_response = &sci_req->ssp.rsp; - - resp_buf = &isci_tmf->resp.resp_iu; - - len = min_t(u32, - SSP_RESP_IU_MAX_SIZE, - be32_to_cpu(ssp_response->response_data_len)); - - memcpy(resp_buf, ssp_response->resp_data, len); -} - -/* - * ***************************************************************************** - * * CONSTRUCTED STATE HANDLERS - * ***************************************************************************** */ - -/* - * This method implements the action taken when a constructed - * SCIC_SDS_IO_REQUEST_T object receives a scic_sds_request_start() request. - * This method will, if necessary, allocate a TCi for the io request object and - * then will, if necessary, copy the constructed TC data into the actual TC - * buffer. If everything is successful the post context field is updated with - * the TCi so the controller can post the request to the hardware. enum sci_status - * SCI_SUCCESS SCI_FAILURE_INSUFFICIENT_RESOURCES - */ -static enum sci_status scic_sds_request_constructed_state_start_handler( - struct scic_sds_request *request) -{ - struct scu_task_context *task_context; - - if (request->io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { - request->io_tag = - scic_controller_allocate_io_tag(request->owning_controller); - } - - /* Record the IO Tag in the request */ - if (request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { - task_context = request->task_context_buffer; - - task_context->task_index = scic_sds_io_tag_get_index(request->io_tag); - - switch (task_context->protocol_type) { - case SCU_TASK_CONTEXT_PROTOCOL_SMP: - case SCU_TASK_CONTEXT_PROTOCOL_SSP: - /* SSP/SMP Frame */ - task_context->type.ssp.tag = request->io_tag; - task_context->type.ssp.target_port_transfer_tag = 0xFFFF; - break; - - case SCU_TASK_CONTEXT_PROTOCOL_STP: - /* - * STP/SATA Frame - * task_context->type.stp.ncq_tag = request->ncq_tag; */ - break; - - case SCU_TASK_CONTEXT_PROTOCOL_NONE: - /* / @todo When do we set no protocol type? */ - break; - - default: - /* This should never happen since we build the IO requests */ - break; - } - - /* - * Check to see if we need to copy the task context buffer - * or have been building into the task context buffer */ - if (request->was_tag_assigned_by_user == false) { - scic_sds_controller_copy_task_context( - request->owning_controller, request); - } - - /* Add to the post_context the io tag value */ - request->post_context |= scic_sds_io_tag_get_index(request->io_tag); - - /* Everything is good go ahead and change state */ - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_STARTED); - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INSUFFICIENT_RESOURCES; -} - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_terminate() request. Since the request - * has not yet been posted to the hardware the request transitions to the - * completed state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_constructed_state_abort_handler( - struct scic_sds_request *request) -{ - /* - * This request has been terminated by the user make sure that the correct - * status code is returned */ - scic_sds_request_set_status(request, - SCU_TASK_DONE_TASK_ABORT, - SCI_FAILURE_IO_TERMINATED); - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * STARTED STATE HANDLERS - * ***************************************************************************** */ - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_terminate() request. Since the request - * has been posted to the hardware the io request state is changed to the - * aborting state. enum sci_status SCI_SUCCESS - */ -enum sci_status scic_sds_request_started_state_abort_handler( - struct scic_sds_request *request) -{ - if (request->has_started_substate_machine) - sci_base_state_machine_stop(&request->started_substate_machine); - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); - return SCI_SUCCESS; -} - -/* - * scic_sds_request_started_state_tc_completion_handler() - This method process - * TC (task context) completions for normal IO request (i.e. Task/Abort - * Completions of type 0). This method will update the - * SCIC_SDS_IO_REQUEST_T::status field. - * @sci_req: This parameter specifies the request for which a completion - * occurred. - * @completion_code: This parameter specifies the completion code received from - * the SCU. - * - */ -enum sci_status -scic_sds_request_started_state_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - u8 datapres; - struct ssp_response_iu *resp_iu; - - /* - * TODO: Any SDMA return code of other than 0 is bad - * decode 0x003C0000 to determine SDMA status - */ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - break; - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): - { - /* - * There are times when the SCU hardware will return an early - * response because the io request specified more data than is - * returned by the target device (mode pages, inquiry data, - * etc.). We must check the response stats to see if this is - * truly a failed request or a good request that just got - * completed early. - */ - struct ssp_response_iu *resp = &sci_req->ssp.rsp; - ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - - sci_swab32_cpy(&sci_req->ssp.rsp, - &sci_req->ssp.rsp, - word_cnt); - - if (resp->status == 0) { - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS_IO_DONE_EARLY); - } else { - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - } - } - break; - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): - { - ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - - sci_swab32_cpy(&sci_req->ssp.rsp, - &sci_req->ssp.rsp, - word_cnt); - - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; - } - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): - /* - * / @todo With TASK_DONE_RESP_LEN_ERR is the response frame - * guaranteed to be received before this completion status is - * posted? - */ - resp_iu = &sci_req->ssp.rsp; - datapres = resp_iu->datapres; - - if ((datapres == 0x01) || (datapres == 0x02)) { - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - } else - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - break; - - /* only stp device gets suspended. */ - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): - if (sci_req->protocol == SCIC_STP_PROTOCOL) { - scic_sds_request_set_status( - sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); - } else { - scic_sds_request_set_status( - sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - } - break; - - /* both stp/ssp device gets suspended */ - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): - scic_sds_request_set_status( - sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); - break; - - /* neither ssp nor stp gets suspended. */ - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): - default: - scic_sds_request_set_status( - sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - break; - } - - /* - * TODO: This is probably wrong for ACK/NAK timeout conditions - */ - - /* In all cases we will treat this as the completion of the IO req. */ - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - return SCI_SUCCESS; -} - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_frame_handler() request. This method - * first determines the frame type received. If this is a response frame then - * the response data is copied to the io request response buffer for processing - * at completion time. If the frame type is not a response buffer an error is - * logged. enum sci_status SCI_SUCCESS SCI_FAILURE_INVALID_PARAMETER_VALUE - */ -static enum sci_status -scic_sds_request_started_state_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - u32 *frame_header; - struct ssp_frame_hdr ssp_hdr; - ssize_t word_cnt; - - status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - (void **)&frame_header); - - word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32); - sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt); - - if (ssp_hdr.frame_type == SSP_RESPONSE) { - struct ssp_response_iu *resp_iu; - ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - - status = scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - (void **)&resp_iu); - - sci_swab32_cpy(&sci_req->ssp.rsp, - resp_iu, word_cnt); - - resp_iu = &sci_req->ssp.rsp; - - if ((resp_iu->datapres == 0x01) || - (resp_iu->datapres == 0x02)) { - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - } else - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - } else { - /* This was not a response frame why did it get forwarded? */ - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p received unexpected " - "frame %d type 0x%02x\n", - __func__, - sci_req, - frame_index, - ssp_hdr.frame_type); - } - - /* - * In any case we are done with this frame buffer return it to the - * controller - */ - scic_sds_controller_release_frame( - sci_req->owning_controller, frame_index); - - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * COMPLETED STATE HANDLERS - * ***************************************************************************** */ - - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_complete() request. This method frees up - * any io request resources that have been allocated and transitions the - * request to its final state. Consider stopping the state machine instead of - * transitioning to the final state? enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_completed_state_complete_handler( - struct scic_sds_request *request) -{ - if (request->was_tag_assigned_by_user != true) { - scic_controller_free_io_tag( - request->owning_controller, request->io_tag); - } - - if (request->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) { - scic_sds_controller_release_frame( - request->owning_controller, request->saved_rx_frame_index); - } - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_FINAL); - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * ABORTING STATE HANDLERS - * ***************************************************************************** */ - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_terminate() request. This method is the - * io request aborting state abort handlers. On receipt of a multiple - * terminate requests the io request will transition to the completed state. - * This should not happen in normal operation. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_aborting_state_abort_handler( - struct scic_sds_request *request) -{ - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - return SCI_SUCCESS; -} - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_task_completion() request. This method - * decodes the completion type waiting for the abort task complete - * notification. When the abort task complete is received the io request - * transitions to the completed state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): - case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED - ); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - - default: - /* - * Unless we get some strange error wait for the task abort to complete - * TODO: Should there be a state change for this completion? */ - break; - } - - return SCI_SUCCESS; -} - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_frame_handler() request. This method - * discards the unsolicited frame since we are waiting for the abort task - * completion. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_aborting_state_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - /* TODO: Is it even possible to get an unsolicited frame in the aborting state? */ - - scic_sds_controller_release_frame( - sci_req->owning_controller, frame_index); - - return SCI_SUCCESS; -} - -static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { - [SCI_BASE_REQUEST_STATE_INITIAL] = { - }, - [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { - .start_handler = scic_sds_request_constructed_state_start_handler, - .abort_handler = scic_sds_request_constructed_state_abort_handler, - }, - [SCI_BASE_REQUEST_STATE_STARTED] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, - .frame_handler = scic_sds_request_started_state_frame_handler, - }, - [SCI_BASE_REQUEST_STATE_COMPLETED] = { - .complete_handler = scic_sds_request_completed_state_complete_handler, - }, - [SCI_BASE_REQUEST_STATE_ABORTING] = { - .abort_handler = scic_sds_request_aborting_state_abort_handler, - .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, - .frame_handler = scic_sds_request_aborting_state_frame_handler, - }, - [SCI_BASE_REQUEST_STATE_FINAL] = { - }, -}; - -/** - * scic_sds_request_initial_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_INITIAL state. This state is entered when the initial - * base request is constructed. Entry into the initial state sets all handlers - * for the io request object to their default handlers. none - */ -static void scic_sds_request_initial_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_INITIAL - ); -} - -/** - * scic_sds_request_constructed_state_enter() - - * @object: The io request object that is to enter the constructed state. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_CONSTRUCTED state. The method sets the state handlers - * for the the constructed state. none - */ -static void scic_sds_request_constructed_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_CONSTRUCTED - ); -} - -/** - * scic_sds_request_started_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This is cast into a SCIC_SDS_IO_REQUEST object. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_STARTED state. If the io request object type is a - * SCSI Task request we must enter the started substate machine. none - */ -static void scic_sds_request_started_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_STARTED - ); - - /* - * Most of the request state machines have a started substate machine so - * start its execution on the entry to the started state. */ - if (sci_req->has_started_substate_machine == true) - sci_base_state_machine_start(&sci_req->started_substate_machine); -} - -/** - * scic_sds_request_started_state_exit() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST - * object. - * - * This method implements the actions taken when exiting the - * SCI_BASE_REQUEST_STATE_STARTED state. For task requests the action will be - * to stop the started substate machine. none - */ -static void scic_sds_request_started_state_exit(void *object) -{ - struct scic_sds_request *sci_req = object; - - if (sci_req->has_started_substate_machine == true) - sci_base_state_machine_stop(&sci_req->started_substate_machine); -} - -/** - * scic_sds_request_completed_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST - * object. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_COMPLETED state. This state is entered when the - * SCIC_SDS_IO_REQUEST has completed. The method will decode the request - * completion status and convert it to an enum sci_status to return in the - * completion callback function. none - */ -static void scic_sds_request_completed_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - struct scic_sds_controller *scic = - scic_sds_request_get_controller(sci_req); - struct isci_host *ihost = scic_to_ihost(scic); - struct isci_request *ireq = sci_req_to_ireq(sci_req); - - SET_STATE_HANDLER(sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Tell the SCI_USER that the IO request is complete */ - if (sci_req->is_task_management_request == false) - isci_request_io_request_complete(ihost, - ireq, - sci_req->sci_status); - else - isci_task_request_complete(ihost, ireq, sci_req->sci_status); -} - -/** - * scic_sds_request_aborting_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST - * object. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_ABORTING state. none - */ -static void scic_sds_request_aborting_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - /* Setting the abort bit in the Task Context is required by the silicon. */ - sci_req->task_context_buffer->abort = 1; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_ABORTING - ); -} - -/** - * scic_sds_request_final_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This is cast into a SCIC_SDS_IO_REQUEST object. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_FINAL state. The only action required is to put the - * state handlers in place. none - */ -static void scic_sds_request_final_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_FINAL - ); -} - -static const struct sci_base_state scic_sds_request_state_table[] = { - [SCI_BASE_REQUEST_STATE_INITIAL] = { - .enter_state = scic_sds_request_initial_state_enter, - }, - [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { - .enter_state = scic_sds_request_constructed_state_enter, - }, - [SCI_BASE_REQUEST_STATE_STARTED] = { - .enter_state = scic_sds_request_started_state_enter, - .exit_state = scic_sds_request_started_state_exit - }, - [SCI_BASE_REQUEST_STATE_COMPLETED] = { - .enter_state = scic_sds_request_completed_state_enter, - }, - [SCI_BASE_REQUEST_STATE_ABORTING] = { - .enter_state = scic_sds_request_aborting_state_enter, - }, - [SCI_BASE_REQUEST_STATE_FINAL] = { - .enter_state = scic_sds_request_final_state_enter, - }, -}; - -static void scic_sds_general_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 io_tag, struct scic_sds_request *sci_req) -{ - sci_base_state_machine_construct(&sci_req->state_machine, sci_req, - scic_sds_request_state_table, SCI_BASE_REQUEST_STATE_INITIAL); - sci_base_state_machine_start(&sci_req->state_machine); - - sci_req->io_tag = io_tag; - sci_req->owning_controller = scic; - sci_req->target_device = sci_dev; - sci_req->has_started_substate_machine = false; - sci_req->protocol = SCIC_NO_PROTOCOL; - sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; - sci_req->device_sequence = scic_sds_remote_device_get_sequence(sci_dev); - - sci_req->sci_status = SCI_SUCCESS; - sci_req->scu_status = 0; - sci_req->post_context = 0xFFFFFFFF; - - sci_req->is_task_management_request = false; - - if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { - sci_req->was_tag_assigned_by_user = false; - sci_req->task_context_buffer = NULL; - } else { - sci_req->was_tag_assigned_by_user = true; - - sci_req->task_context_buffer = - scic_sds_controller_get_task_context_buffer(scic, io_tag); - } -} - -enum sci_status -scic_io_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 io_tag, struct scic_sds_request *sci_req) -{ - struct domain_device *dev = sci_dev_to_domain(sci_dev); - enum sci_status status = SCI_SUCCESS; - - /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); - - if (sci_dev->rnc.remote_node_index == - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) - return SCI_FAILURE_INVALID_REMOTE_DEVICE; - - if (dev->dev_type == SAS_END_DEV) - scic_sds_ssp_io_request_assign_buffers(sci_req); - else if ((dev->dev_type == SATA_DEV) || - (dev->tproto & SAS_PROTOCOL_STP)) { - scic_sds_stp_request_assign_buffers(sci_req); - memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd)); - } else if (dev_is_expander(dev)) { - scic_sds_smp_request_assign_buffers(sci_req); - memset(&sci_req->smp.cmd, 0, sizeof(sci_req->smp.cmd)); - } else - status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - - if (status == SCI_SUCCESS) { - memset(sci_req->task_context_buffer, 0, - offsetof(struct scu_task_context, sgl_pair_ab)); - } - - return status; -} - -enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 io_tag, struct scic_sds_request *sci_req) -{ - struct domain_device *dev = sci_dev_to_domain(sci_dev); - enum sci_status status = SCI_SUCCESS; - - /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); - - if (dev->dev_type == SAS_END_DEV) { - scic_sds_ssp_task_request_assign_buffers(sci_req); - - sci_req->has_started_substate_machine = true; - - /* Construct the started sub-state machine. */ - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - sci_req, - scic_sds_io_request_started_task_mgmt_substate_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION - ); - } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) - scic_sds_stp_request_assign_buffers(sci_req); - else - status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - - if (status == SCI_SUCCESS) { - sci_req->is_task_management_request = true; - memset(sci_req->task_context_buffer, 0, sizeof(struct scu_task_context)); - } - - return status; -} diff --git a/drivers/scsi/isci/core/scic_sds_request.h b/drivers/scsi/isci/core/scic_sds_request.h deleted file mode 100644 index a8d74a1..0000000 --- a/drivers/scsi/isci/core/scic_sds_request.h +++ /dev/null @@ -1,491 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_IO_REQUEST_H_ -#define _SCIC_SDS_IO_REQUEST_H_ - -#include "isci.h" -#include "scic_io_request.h" -#include "state_machine.h" -#include "scu_task_context.h" -#include "scic_sds_stp_request.h" -#include "sas.h" - -struct scic_sds_controller; -struct scic_sds_remote_device; -struct scic_sds_io_request_state_handler; - -/** - * enum _scic_sds_io_request_started_task_mgmt_substates - This enumeration - * depicts all of the substates for a task management request to be - * performed in the STARTED super-state. - * - * - */ -enum scic_sds_raw_request_started_task_mgmt_substates { - /** - * The AWAIT_TC_COMPLETION sub-state indicates that the started raw - * task management request is waiting for the transmission of the - * initial frame (i.e. command, task, etc.). - */ - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION, - - /** - * This sub-state indicates that the started task management request - * is waiting for the reception of an unsolicited frame - * (i.e. response IU). - */ - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE, -}; - - -/** - * enum _scic_sds_smp_request_started_substates - This enumeration depicts all - * of the substates for a SMP request to be performed in the STARTED - * super-state. - * - * - */ -enum scic_sds_smp_request_started_substates { - /** - * This sub-state indicates that the started task management request - * is waiting for the reception of an unsolicited frame - * (i.e. response IU). - */ - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE, - - /** - * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP request is - * waiting for the transmission of the initial frame (i.e. command, task, etc.). - */ - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, -}; - -struct scic_sds_request { - /** - * This field contains the information for the base request state machine. - */ - struct sci_base_state_machine state_machine; - - /** - * This field simply points to the controller to which this IO request - * is associated. - */ - struct scic_sds_controller *owning_controller; - - /** - * This field simply points to the remote device to which this IO request - * is associated. - */ - struct scic_sds_remote_device *target_device; - - /** - * This field is utilized to determine if the SCI user is managing - * the IO tag for this request or if the core is managing it. - */ - bool was_tag_assigned_by_user; - - /** - * This field indicates the IO tag for this request. The IO tag is - * comprised of the task_index and a sequence count. The sequence count - * is utilized to help identify tasks from one life to another. - */ - u16 io_tag; - - /** - * This field specifies the protocol being utilized for this - * IO request. - */ - SCIC_TRANSPORT_PROTOCOL protocol; - - /** - * This field indicates the completion status taken from the SCUs - * completion code. It indicates the completion result for the SCU hardware. - */ - u32 scu_status; - - /** - * This field indicates the completion status returned to the SCI user. It - * indicates the users view of the io request completion. - */ - u32 sci_status; - - /** - * This field contains the value to be utilized when posting (e.g. Post_TC, - * Post_TC_Abort) this request to the silicon. - */ - u32 post_context; - - struct scu_task_context *task_context_buffer; - struct scu_task_context tc ____cacheline_aligned; - - /* could be larger with sg chaining */ - #define SCU_SGL_SIZE ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2) - struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); - - /** - * This field indicates if this request is a task management request or - * normal IO request. - */ - bool is_task_management_request; - - /** - * This field indicates that this request contains an initialized started - * substate machine. - */ - bool has_started_substate_machine; - - /** - * This field is a pointer to the stored rx frame data. It is used in STP - * internal requests and SMP response frames. If this field is non-NULL the - * saved frame must be released on IO request completion. - * - * @todo In the future do we want to keep a list of RX frame buffers? - */ - u32 saved_rx_frame_index; - - /** - * This field specifies the data necessary to manage the sub-state - * machine executed while in the SCI_BASE_REQUEST_STATE_STARTED state. - */ - struct sci_base_state_machine started_substate_machine; - - /** - * This field specifies the current state handlers in place for this - * IO Request object. This field is updated each time the request - * changes state. - */ - const struct scic_sds_io_request_state_handler *state_handlers; - - /** - * This field in the recorded device sequence for the io request. This is - * recorded during the build operation and is compared in the start - * operation. If the sequence is different then there was a change of - * devices from the build to start operations. - */ - u8 device_sequence; - - union { - struct { - union { - struct ssp_cmd_iu cmd; - struct ssp_task_iu tmf; - }; - union { - struct ssp_response_iu rsp; - u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; - }; - } ssp; - - struct { - struct smp_req cmd; - struct smp_resp rsp; - } smp; - - struct { - struct scic_sds_stp_request req; - struct host_to_dev_fis cmd; - struct dev_to_host_fis rsp; - } stp; - }; - -}; - -static inline struct scic_sds_request *to_sci_req(struct scic_sds_stp_request *stp_req) -{ - struct scic_sds_request *sci_req; - - sci_req = container_of(stp_req, typeof(*sci_req), stp.req); - return sci_req; -} - -/** - * enum sci_base_request_states - This enumeration depicts all the states for - * the common request state machine. - * - * - */ -enum sci_base_request_states { - /** - * Simply the initial state for the base request state machine. - */ - SCI_BASE_REQUEST_STATE_INITIAL, - - /** - * This state indicates that the request has been constructed. This state - * is entered from the INITIAL state. - */ - SCI_BASE_REQUEST_STATE_CONSTRUCTED, - - /** - * This state indicates that the request has been started. This state is - * entered from the CONSTRUCTED state. - */ - SCI_BASE_REQUEST_STATE_STARTED, - - /** - * This state indicates that the request has completed. - * This state is entered from the STARTED state. This state is entered from - * the ABORTING state. - */ - SCI_BASE_REQUEST_STATE_COMPLETED, - - /** - * This state indicates that the request is in the process of being - * terminated/aborted. - * This state is entered from the CONSTRUCTED state. - * This state is entered from the STARTED state. - */ - SCI_BASE_REQUEST_STATE_ABORTING, - - /** - * Simply the final state for the base request state machine. - */ - SCI_BASE_REQUEST_STATE_FINAL, -}; - -typedef enum sci_status (*scic_sds_io_request_handler_t) - (struct scic_sds_request *request); -typedef enum sci_status (*scic_sds_io_request_frame_handler_t) - (struct scic_sds_request *req, u32 frame); -typedef enum sci_status (*scic_sds_io_request_event_handler_t) - (struct scic_sds_request *req, u32 event); -typedef enum sci_status (*scic_sds_io_request_task_completion_handler_t) - (struct scic_sds_request *req, u32 completion_code); - -/** - * struct scic_sds_io_request_state_handler - This is the SDS core definition - * of the state handlers. - * - * - */ -struct scic_sds_io_request_state_handler { - /** - * The start_handler specifies the method invoked when a user attempts to - * start a request. - */ - scic_sds_io_request_handler_t start_handler; - - /** - * The abort_handler specifies the method invoked when a user attempts to - * abort a request. - */ - scic_sds_io_request_handler_t abort_handler; - - /** - * The complete_handler specifies the method invoked when a user attempts to - * complete a request. - */ - scic_sds_io_request_handler_t complete_handler; - - scic_sds_io_request_task_completion_handler_t tc_completion_handler; - scic_sds_io_request_event_handler_t event_handler; - scic_sds_io_request_frame_handler_t frame_handler; - -}; - -extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[]; - -/** - * scic_sds_request_get_controller() - - * - * This macro will return the controller for this io request object - */ -#define scic_sds_request_get_controller(sci_req) \ - ((sci_req)->owning_controller) - -/** - * scic_sds_request_get_device() - - * - * This macro will return the device for this io request object - */ -#define scic_sds_request_get_device(sci_req) \ - ((sci_req)->target_device) - -/** - * scic_sds_request_get_port() - - * - * This macro will return the port for this io request object - */ -#define scic_sds_request_get_port(sci_req) \ - scic_sds_remote_device_get_port(scic_sds_request_get_device(sci_req)) - -/** - * scic_sds_request_get_post_context() - - * - * This macro returns the constructed post context result for the io request. - */ -#define scic_sds_request_get_post_context(sci_req) \ - ((sci_req)->post_context) - -/** - * scic_sds_request_get_task_context() - - * - * This is a helper macro to return the os handle for this request object. - */ -#define scic_sds_request_get_task_context(request) \ - ((request)->task_context_buffer) - -/** - * scic_sds_request_set_status() - - * - * This macro will set the scu hardware status and sci request completion - * status for an io request. - */ -#define scic_sds_request_set_status(request, scu_status_code, sci_status_code) \ - { \ - (request)->scu_status = (scu_status_code); \ - (request)->sci_status = (sci_status_code); \ - } - -#define scic_sds_request_complete(a_request) \ - ((a_request)->state_handlers->complete_handler(a_request)) - - -extern enum sci_status -scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code); - -/** - * SCU_SGL_ZERO() - - * - * This macro zeros the hardware SGL element data - */ -#define SCU_SGL_ZERO(scu_sge) \ - { \ - (scu_sge).length = 0; \ - (scu_sge).address_lower = 0; \ - (scu_sge).address_upper = 0; \ - (scu_sge).address_modifier = 0; \ - } - -/** - * SCU_SGL_COPY() - - * - * This macro copys the SGL Element data from the host os to the hardware SGL - * elment data - */ -#define SCU_SGL_COPY(scu_sge, os_sge) \ - { \ - (scu_sge).length = sg_dma_len(sg); \ - (scu_sge).address_upper = \ - upper_32_bits(sg_dma_address(sg)); \ - (scu_sge).address_lower = \ - lower_32_bits(sg_dma_address(sg)); \ - (scu_sge).address_modifier = 0; \ - } - -/** - * scic_sds_request_get_user_request() - - * - * This is a helper macro to return the os handle for this request object. - */ -#define scic_sds_request_get_user_request(request) \ - ((request)->user_request) - -/* - * ***************************************************************************** - * * CORE REQUEST PROTOTYPES - * ***************************************************************************** */ - -void scic_sds_request_build_sgl( - struct scic_sds_request *sci_req); - - - -void scic_sds_stp_request_assign_buffers( - struct scic_sds_request *sci_req); - -void scic_sds_smp_request_assign_buffers( - struct scic_sds_request *sci_req); - -/* --------------------------------------------------------------------------- */ - -enum sci_status scic_sds_request_start( - struct scic_sds_request *sci_req); - -enum sci_status scic_sds_io_request_terminate( - struct scic_sds_request *sci_req); - -enum sci_status scic_sds_io_request_complete( - struct scic_sds_request *sci_req); - -void scic_sds_io_request_copy_response( - struct scic_sds_request *sci_req); - -enum sci_status scic_sds_io_request_event_handler( - struct scic_sds_request *sci_req, - u32 event_code); - -enum sci_status scic_sds_io_request_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index); - - -enum sci_status scic_sds_task_request_terminate( - struct scic_sds_request *sci_req); - -/* - * ***************************************************************************** - * * STARTED STATE HANDLERS - * ***************************************************************************** */ - -enum sci_status scic_sds_request_started_state_abort_handler( - struct scic_sds_request *sci_req); - -enum sci_status scic_sds_request_started_state_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code); - -#endif /* _SCIC_SDS_IO_REQUEST_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c deleted file mode 100644 index 6a2b65b..0000000 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "state_machine.h" -#include "remote_device.h" -#include "scic_sds_request.h" -#include "scic_sds_smp_request.h" -#include "sci_util.h" -#include "scu_completion_codes.h" -#include "scu_task_context.h" -#include "host.h" - -static void scu_smp_request_construct_task_context( - struct scic_sds_request *sci_req, - struct smp_req *smp_req); - -void scic_sds_smp_request_assign_buffers(struct scic_sds_request *sci_req) -{ - if (sci_req->was_tag_assigned_by_user == false) - sci_req->task_context_buffer = &sci_req->tc; -} - -/* - * This function will fill in the SCU Task Context for a SMP request. The - * following important settings are utilized: -# task_type == - * SCU_TASK_TYPE_SMP. This simply indicates that a normal request type - * (i.e. non-raw frame) is being utilized to perform task management. -# - * control_frame == 1. This ensures that the proper endianess is set so - * that the bytes are transmitted in the right order for a smp request frame. - * @sci_req: This parameter specifies the smp request object being - * constructed. - * - */ -static void -scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, - struct smp_req *smp_req) -{ - dma_addr_t dma_addr; - struct scic_sds_controller *scic; - struct scic_sds_remote_device *sci_dev; - struct scic_sds_port *sci_port; - struct scu_task_context *task_context; - ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32); - - /* byte swap the smp request. */ - sci_swab32_cpy(&sci_req->smp.cmd, smp_req, - word_cnt); - - task_context = scic_sds_request_get_task_context(sci_req); - - scic = scic_sds_request_get_controller(sci_req); - sci_dev = scic_sds_request_get_device(sci_req); - sci_port = scic_sds_request_get_port(sci_req); - - /* - * Fill in the TC with the its required data - * 00h - */ - task_context->priority = 0; - task_context->initiator_request = 1; - task_context->connection_rate = sci_dev->connection_rate; - task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(scic); - task_context->logical_port_index = scic_sds_port_get_index(sci_port); - task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; - task_context->abort = 0; - task_context->valid = SCU_TASK_CONTEXT_VALID; - task_context->context_type = SCU_TASK_CONTEXT_TYPE; - - /* 04h */ - task_context->remote_node_index = sci_dev->rnc.remote_node_index; - task_context->command_code = 0; - task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; - - /* 08h */ - task_context->link_layer_control = 0; - task_context->do_not_dma_ssp_good_response = 1; - task_context->strict_ordering = 0; - task_context->control_frame = 1; - task_context->timeout_enable = 0; - task_context->block_guard_enable = 0; - - /* 0ch */ - task_context->address_modifier = 0; - - /* 10h */ - task_context->ssp_command_iu_length = smp_req->req_len; - - /* 14h */ - task_context->transfer_length_bytes = 0; - - /* - * 18h ~ 30h, protocol specific - * since commandIU has been build by framework at this point, we just - * copy the frist DWord from command IU to this location. */ - memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32)); - - /* - * 40h - * "For SMP you could program it to zero. We would prefer that way - * so that done code will be consistent." - Venki - */ - task_context->task_phase = 0; - - if (sci_req->was_tag_assigned_by_user) { - /* - * Build the task context now since we have already read - * the data - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(scic) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(sci_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sci_req->io_tag)); - } else { - /* - * Build the task context now since we have already read - * the data. - * I/O tag index is not assigned because we have to wait - * until we get a TCi. - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(scic) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(sci_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); - } - - /* - * Copy the physical address for the command buffer to the SCU Task - * Context command buffer should not contain command header. - */ - dma_addr = scic_io_request_get_dma_addr(sci_req, - ((char *) &sci_req->smp.cmd) + - sizeof(u32)); - - task_context->command_iu_upper = upper_32_bits(dma_addr); - task_context->command_iu_lower = lower_32_bits(dma_addr); - - /* SMP response comes as UF, so no need to set response IU address. */ - task_context->response_iu_upper = 0; - task_context->response_iu_lower = 0; -} - -/* - * This function processes an unsolicited frame while the SMP request is waiting - * for a response frame. It will copy the response data, release the - * unsolicited frame, and transition the request to the - * SCI_BASE_REQUEST_STATE_COMPLETED state. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This function returns an indication of whether the response frame was handled - * successfully or not. SCI_SUCCESS Currently this value is always returned and - * indicates successful processing of the TC response. - */ -static enum sci_status -scic_sds_smp_request_await_response_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - void *frame_header; - struct smp_resp *rsp_hdr = &sci_req->smp.rsp; - ssize_t word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); - - status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - &frame_header); - - /* byte swap the header. */ - sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); - - if (rsp_hdr->frame_type == SMP_RESPONSE) { - void *smp_resp; - - status = scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - &smp_resp); - - word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / - sizeof(u32); - - sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, - smp_resp, word_cnt); - - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); - } else { - /* This was not a response frame why did it get forwarded? */ - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC SMP Request 0x%p received unexpected frame " - "%d type 0x%02x\n", - __func__, - sci_req, - frame_index, - rsp_hdr->frame_type); - - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_SMP_FRM_TYPE_ERR, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - } - - scic_sds_controller_release_frame(sci_req->owning_controller, - frame_index); - - return SCI_SUCCESS; -} - - -/** - * This method processes an abnormal TC completion while the SMP request is - * waiting for a response frame. It decides what happened to the IO based - * on TC completion status. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - /* - * In the AWAIT RESPONSE state, any TC completion is unexpected. - * but if the TC has success status, we complete the IO anyway. */ - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): - /* - * These status has been seen in a specific LSI expander, which sometimes - * is not able to send smp response within 2 ms. This causes our hardware - * break the connection and set TC completion with one of these SMP_XXX_XX_ERR - * status. For these type of error, we ask scic user to retry the request. */ - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - - -/** - * This method processes the completions transport layer (TL) status to - * determine if the SMP request was sent successfully. If the SMP request - * was sent successfully, then the state for the SMP request transits to - * waiting for a response frame. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - - -static const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[] = { - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, - .frame_handler = scic_sds_smp_request_await_response_frame_handler, - }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, - } -}; - -/** - * This method performs the actions required when entering the - * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This - * includes setting the IO request state handlers for this sub-state. - * @object: This parameter specifies the request object for which the sub-state - * change is occurring. - * - * none. - */ -static void scic_sds_smp_request_started_await_response_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_smp_request_started_substate_handler_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE - ); -} - -/** - * This method performs the actions required when entering the - * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION sub-state. - * This includes setting the SMP request state handlers for this sub-state. - * @object: This parameter specifies the request object for which the sub-state - * change is occurring. - * - * none. - */ -static void scic_sds_smp_request_started_await_tc_completion_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_smp_request_started_substate_handler_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION - ); -} - -static const struct sci_base_state scic_sds_smp_request_started_substate_table[] = { - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .enter_state = scic_sds_smp_request_started_await_response_substate_enter, - }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .enter_state = scic_sds_smp_request_started_await_tc_completion_substate_enter, - }, -}; - -/** - * This method is called by the SCI user to build an SMP IO request. - * - * - The user must have previously called scic_io_request_construct() on the - * supplied IO request. Indicate if the controller successfully built the IO - * request. SCI_SUCCESS This value is returned if the IO request was - * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned - * if the remote_device does not support the SMP protocol. - * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not - * properly set the association between the SCIC IO request and the user's IO - * request. - */ -enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) -{ - struct smp_req *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); - - if (!smp_req) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - - sci_req->protocol = SCIC_SMP_PROTOCOL; - sci_req->has_started_substate_machine = true; - - /* Construct the started sub-state machine. */ - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - sci_req, - scic_sds_smp_request_started_substate_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE - ); - - /* Construct the SMP SCU Task Context */ - memcpy(smp_req, &sci_req->smp.cmd, sizeof(*smp_req)); - - /* - * Look at the SMP requests' header fields; for certain SAS 1.x SMP - * functions under SAS 2.0, a zero request length really indicates - * a non-zero default length. */ - if (smp_req->req_len == 0) { - switch (smp_req->func) { - case SMP_DISCOVER: - case SMP_REPORT_PHY_ERR_LOG: - case SMP_REPORT_PHY_SATA: - case SMP_REPORT_ROUTE_INFO: - smp_req->req_len = 2; - break; - case SMP_CONF_ROUTE_INFO: - case SMP_PHY_CONTROL: - case SMP_PHY_TEST_FUNCTION: - smp_req->req_len = 9; - break; - /* Default - zero is a valid default for 2.0. */ - } - } - - scu_smp_request_construct_task_context(sci_req, smp_req); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); - - kfree(smp_req); - - return SCI_SUCCESS; -} diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.h b/drivers/scsi/isci/core/scic_sds_smp_request.h deleted file mode 100644 index f432b7a..0000000 --- a/drivers/scsi/isci/core/scic_sds_smp_request.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#ifndef _SCIC_SDS_SMP_REQUEST_T_ -#define _SCIC_SDS_SMP_REQUEST_T_ - -#include "scic_sds_request.h" - - -u32 scic_sds_smp_request_get_object_size(void); - - -void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); - -#endif /* _SCIC_SDS_SMP_REQUEST_T_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_ssp_request.c b/drivers/scsi/isci/core/scic_sds_ssp_request.c deleted file mode 100644 index 3fdf68b..0000000 --- a/drivers/scsi/isci/core/scic_sds_ssp_request.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "host.h" -#include "state_machine.h" -#include "scic_sds_request.h" -#include "scu_completion_codes.h" -#include "scu_task_context.h" - -/** - * This method processes the completions transport layer (TL) status to - * determine if the RAW task management frame was sent successfully. If the - * raw frame was sent successfully, then the state for the task request - * transitions to waiting for a response frame. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE - ); - break; - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): - /* - * Currently, the decision is to simply allow the task request to - * timeout if the task IU wasn't received successfully. - * There is a potential for receiving multiple task responses if we - * decide to send the task IU again. */ - dev_warn(scic_to_dev(sci_req->owning_controller), - "%s: TaskRequest:0x%p CompletionCode:%x - " - "ACK/NAK timeout\n", - __func__, - sci_req, - completion_code); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -/** - * This method is responsible for processing a terminate/abort request for this - * TC while the request is waiting for the task management response - * unsolicited frame. - * @sci_req: This parameter specifies the request for which the - * termination was requested. - * - * This method returns an indication as to whether the abort request was - * successfully handled. need to update to ensure the received UF doesn't cause - * damage to subsequent requests (i.e. put the extended tag in a holding - * pattern for this particular device). - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler( - struct scic_sds_request *request) -{ - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - return SCI_SUCCESS; -} - -/** - * This method processes an unsolicited frame while the task mgmt request is - * waiting for a response frame. It will copy the response data, release - * the unsolicited frame, and transition the request to the - * SCI_BASE_REQUEST_STATE_COMPLETED state. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This method returns an indication of whether the TC response frame was - * handled successfully or not. SCI_SUCCESS Currently this value is always - * returned and indicates successful processing of the TC response. Should - * probably update to check frame type and make sure it is a response frame. - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - scic_sds_io_request_copy_response(request); - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - scic_sds_controller_release_frame(request->owning_controller, - frame_index); - return SCI_SUCCESS; -} - -static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[] = { - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, - }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, - .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, - } -}; - -/** - * This method performs the actions required when entering the - * SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION - * sub-state. This includes setting the IO request state handlers for this - * sub-state. - * @object: This parameter specifies the request object for which the sub-state - * change is occurring. - * - * none. - */ -static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_ssp_task_request_started_substate_handler_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION - ); -} - -/** - * This method performs the actions required when entering the - * SCIC_SDS_IO_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This - * includes setting the IO request state handlers for this sub-state. - * @object: This parameter specifies the request object for which the sub-state - * change is occurring. - * - * none. - */ -static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_ssp_task_request_started_substate_handler_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE - ); -} - -const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[] = { - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .enter_state = scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter, - }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .enter_state = scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter, - }, -}; - diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h b/drivers/scsi/isci/core/scic_sds_stp_packet_request.h deleted file mode 100644 index e94d689..0000000 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#ifndef _SCIC_SDS_STP_PACKET_REQUEST_H_ -#define _SCIC_SDS_STP_PACKET_REQUEST_H_ - -#include "scic_sds_stp_request.h" - -/** - * This file contains the structures and constants for PACKET protocol requests. - * - * - */ - - -/** - * - * - * This is the enumeration of the SATA PIO DATA IN started substate machine. - */ -enum _scic_sds_stp_packet_request_started_substates { - /** - * While in this state the IO request object is waiting for the TC completion - * notification for the H2D Register FIS - */ - SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_TC_COMPLETION_SUBSTATE, - - /** - * While in this state the IO request object is waiting for either a PIO Setup. - */ - SCIC_SDS_STP_PACKET_REQUEST_STARTED_PACKET_PHASE_AWAIT_PIO_SETUP_SUBSTATE, - - /** - * While in this state the IO request object is waiting for TC completion for - * the Packet DMA DATA fis or Raw Frame. - */ - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_TC_COMPLETION_SUBSTATE, - - /** - * The non-data IO transit to this state in this state after receiving TC - * completion. While in this state IO request object is waiting for D2H status - * frame as UF. - */ - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMMAND_PHASE_AWAIT_D2H_FIS_SUBSTATE, - - /** - * The IO transit to this state in this state if the previous TC completion status - * is not success and the atapi device is suspended due to target device failed the IO. - * While in this state IO request object is waiting for device coming out of the - * suspension state then complete the IO. - */ - SCIC_SDS_STP_PACKET_REQUEST_STARTED_COMPLETION_DELAY_SUBSTATE, -}; - -#define scic_sds_stp_packet_request_construct(request) SCI_FAILURE -#define scu_stp_packet_request_command_phase_construct_task_context(reqeust, tc) -#define scu_stp_packet_request_command_phase_reconstruct_raw_frame_task_context(reqeust, tc) -#define scic_sds_stp_packet_request_process_status_fis(reqeust, fis) SCI_FAILURE -#define scic_sds_stp_packet_internal_request_sense_build_sgl(request) - -#endif /* _SCIC_SDS_STP_PACKET_REQUEST_H_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h b/drivers/scsi/isci/core/scic_sds_stp_pio_request.h deleted file mode 100644 index e015a11..0000000 --- a/drivers/scsi/isci/core/scic_sds_stp_pio_request.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_SATA_PIO_REQUEST_H_ -#define _SCIC_SDS_SATA_PIO_REQUEST_H_ - -#include "scic_sds_request.h" -#include "scu_task_context.h" - -/** - * This file contains the structures and constants for SATA PIO requests. - * - * - */ - - -/** - * - * - * This is the enumeration of the SATA PIO DATA IN started substate machine. - */ -enum _scic_sds_stp_request_started_pio_substates { - /** - * While in this state the IO request object is waiting for the TC completion - * notification for the H2D Register FIS - */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE, - - /** - * While in this state the IO request object is waiting for either a PIO Setup - * FIS or a D2H register FIS. The type of frame received is based on the - * result of the prior frame and line conditions. - */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE, - - /** - * While in this state the IO request object is waiting for a DATA frame from - * the device. - */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE, - - /** - * While in this state the IO request object is waiting to transmit the next data - * frame to the device. - */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE, -}; - -struct scic_sds_stp_request; - - -#endif /* _SCIC_SDS_SATA_PIO_REQUEST_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c deleted file mode 100644 index 308f486..0000000 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ /dev/null @@ -1,1594 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "sas.h" -#include "state_machine.h" -#include "scic_io_request.h" -#include "remote_device.h" -#include "scic_sds_request.h" -#include "scic_sds_stp_pio_request.h" -#include "scic_sds_stp_request.h" -#include "unsolicited_frame_control.h" -#include "sci_util.h" -#include "scu_completion_codes.h" -#include "scu_event_codes.h" -#include "scu_task_context.h" -#include "request.h" - -void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) -{ - if (sci_req->was_tag_assigned_by_user == false) - sci_req->task_context_buffer = &sci_req->tc; -} - -/** - * This method is will fill in the SCU Task Context for any type of SATA - * request. This is called from the various SATA constructors. - * @sci_req: The general IO request object which is to be used in - * constructing the SCU task context. - * @task_context: The buffer pointer for the SCU task context which is being - * constructed. - * - * The general io request construction is complete. The buffer assignment for - * the command buffer is complete. none Revisit task context construction to - * determine what is common for SSP/SMP/STP task context structures. - */ -static void scu_sata_reqeust_construct_task_context( - struct scic_sds_request *sci_req, - struct scu_task_context *task_context) -{ - dma_addr_t dma_addr; - struct scic_sds_controller *controller; - struct scic_sds_remote_device *target_device; - struct scic_sds_port *target_port; - - controller = scic_sds_request_get_controller(sci_req); - target_device = scic_sds_request_get_device(sci_req); - target_port = scic_sds_request_get_port(sci_req); - - /* Fill in the TC with the its required data */ - task_context->abort = 0; - task_context->priority = SCU_TASK_PRIORITY_NORMAL; - task_context->initiator_request = 1; - task_context->connection_rate = target_device->connection_rate; - task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(controller); - task_context->logical_port_index = - scic_sds_port_get_index(target_port); - task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; - task_context->valid = SCU_TASK_CONTEXT_VALID; - task_context->context_type = SCU_TASK_CONTEXT_TYPE; - - task_context->remote_node_index = - scic_sds_remote_device_get_index(sci_req->target_device); - task_context->command_code = 0; - - task_context->link_layer_control = 0; - task_context->do_not_dma_ssp_good_response = 1; - task_context->strict_ordering = 0; - task_context->control_frame = 0; - task_context->timeout_enable = 0; - task_context->block_guard_enable = 0; - - task_context->address_modifier = 0; - task_context->task_phase = 0x01; - - task_context->ssp_command_iu_length = - (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); - - /* Set the first word of the H2D REG FIS */ - task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd; - - if (sci_req->was_tag_assigned_by_user) { - /* - * Build the task context now since we have already read - * the data - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sci_req->io_tag)); - } else { - /* - * Build the task context now since we have already read - * the data. - * I/O tag index is not assigned because we have to wait - * until we get a TCi. - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); - } - - /* - * Copy the physical address for the command buffer to the SCU Task - * Context. We must offset the command buffer by 4 bytes because the - * first 4 bytes are transfered in the body of the TC. - */ - dma_addr = scic_io_request_get_dma_addr(sci_req, - ((char *) &sci_req->stp.cmd) + - sizeof(u32)); - - task_context->command_iu_upper = upper_32_bits(dma_addr); - task_context->command_iu_lower = lower_32_bits(dma_addr); - - /* SATA Requests do not have a response buffer */ - task_context->response_iu_upper = 0; - task_context->response_iu_lower = 0; -} - -/** - * - * @sci_req: - * - * This method will perform any general sata request construction. What part of - * SATA IO request construction is general? none - */ -static void scic_sds_stp_non_ncq_request_construct( - struct scic_sds_request *sci_req) -{ - sci_req->has_started_substate_machine = true; -} - -/** - * - * @sci_req: This parameter specifies the request to be constructed as an - * optimized request. - * @optimized_task_type: This parameter specifies whether the request is to be - * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A - * value of 1 indicates NCQ. - * - * This method will perform request construction common to all types of STP - * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method - * returns an indication as to whether the construction was successful. - */ -static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req, - u8 optimized_task_type, - u32 len, - enum dma_data_direction dir) -{ - struct scu_task_context *task_context = sci_req->task_context_buffer; - - /* Build the STP task context structure */ - scu_sata_reqeust_construct_task_context(sci_req, task_context); - - /* Copy over the SGL elements */ - scic_sds_request_build_sgl(sci_req); - - /* Copy over the number of bytes to be transfered */ - task_context->transfer_length_bytes = len; - - if (dir == DMA_TO_DEVICE) { - /* - * The difference between the DMA IN and DMA OUT request task type - * values are consistent with the difference between FPDMA READ - * and FPDMA WRITE values. Add the supplied task type parameter - * to this difference to set the task type properly for this - * DATA OUT (WRITE) case. */ - task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT - - SCU_TASK_TYPE_DMA_IN); - } else { - /* - * For the DATA IN (READ) case, simply save the supplied - * optimized task type. */ - task_context->task_type = optimized_task_type; - } -} - -/** - * - * @sci_req: This parameter specifies the request to be constructed. - * - * This method will construct the STP UDMA request and its associated TC data. - * This method returns an indication as to whether the construction was - * successful. SCI_SUCCESS Currently this method always returns this value. - */ -enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req, - u32 len, - enum dma_data_direction dir) -{ - scic_sds_stp_optimized_request_construct(sci_req, - SCU_TASK_TYPE_FPDMAQ_READ, - len, dir); - return SCI_SUCCESS; -} - -/** - * scu_stp_raw_request_construct_task_context - - * @sci_req: This parameter specifies the STP request object for which to - * construct a RAW command frame task context. - * @task_context: This parameter specifies the SCU specific task context buffer - * to construct. - * - * This method performs the operations common to all SATA/STP requests - * utilizing the raw frame method. none - */ -static void scu_stp_raw_request_construct_task_context( - struct scic_sds_stp_request *stp_req, - struct scu_task_context *task_context) -{ - struct scic_sds_request *sci_req = to_sci_req(stp_req); - - scu_sata_reqeust_construct_task_context(sci_req, task_context); - - task_context->control_frame = 0; - task_context->priority = SCU_TASK_PRIORITY_NORMAL; - task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; - task_context->type.stp.fis_type = FIS_REGH2D; - task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); -} - -void scic_stp_io_request_set_ncq_tag( - struct scic_sds_request *req, - u16 ncq_tag) -{ - /** - * @note This could be made to return an error to the user if the user - * attempts to set the NCQ tag in the wrong state. - */ - req->task_context_buffer->type.stp.ncq_tag = ncq_tag; -} - -/** - * - * @sci_req: - * - * Get the next SGL element from the request. - Check on which SGL element pair - * we are working - if working on SLG pair element A - advance to element B - - * else - check to see if there are more SGL element pairs for this IO request - * - if there are more SGL element pairs - advance to the next pair and return - * element A struct scu_sgl_element* - */ -static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) -{ - struct scu_sgl_element *current_sgl; - struct scic_sds_request *sci_req = to_sci_req(stp_req); - struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; - - if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - if (pio_sgl->sgl_pair->B.address_lower == 0 && - pio_sgl->sgl_pair->B.address_upper == 0) { - current_sgl = NULL; - } else { - pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B; - current_sgl = &pio_sgl->sgl_pair->B; - } - } else { - if (pio_sgl->sgl_pair->next_pair_lower == 0 && - pio_sgl->sgl_pair->next_pair_upper == 0) { - current_sgl = NULL; - } else { - u64 phys_addr; - - phys_addr = pio_sgl->sgl_pair->next_pair_upper; - phys_addr <<= 32; - phys_addr |= pio_sgl->sgl_pair->next_pair_lower; - - pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr); - pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A; - current_sgl = &pio_sgl->sgl_pair->A; - } - } - - return current_sgl; -} - -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -/** - * - * @request: This parameter specifies the request for which a frame has been - * received. - * @frame_index: This parameter specifies the index of the frame that has been - * received. - * - * This method processes frames received from the target while waiting for a - * device to host register FIS. If a non-register FIS is received during this - * time, it is treated as a protocol violation from an IO perspective. Indicate - * if the received frame was processed successfully. - */ -static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - - return status; - } - - switch (frame_header->fis_type) { - case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - /* The command has completed with error */ - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", __func__, stp_req, - frame_index); - - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); - break; - } - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, - } -}; - -static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_non_data_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req - ); -} - -static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_non_data_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_non_data_await_d2h_enter, - }, -}; - -enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req) -{ - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - scic_sds_stp_non_ncq_request_construct(sci_req); - - /* Build the STP task context structure */ - scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); - - sci_base_state_machine_construct(&sci_req->started_substate_machine, - sci_req, - scic_sds_stp_request_started_non_data_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE); - - return SCI_SUCCESS; -} - -#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ - -/* transmit DATA_FIS from (current sgl + offset) for input - * parameter length. current sgl and offset is alreay stored in the IO request - */ -static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( - struct scic_sds_request *sci_req, - u32 length) -{ - struct scic_sds_controller *scic = sci_req->owning_controller; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scu_task_context *task_context; - struct scu_sgl_element *current_sgl; - - /* Recycle the TC and reconstruct it for sending out DATA FIS containing - * for the data from current_sgl+offset for the input length - */ - task_context = scic_sds_controller_get_task_context_buffer(scic, - sci_req->io_tag); - - if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) - current_sgl = &stp_req->type.pio.request_current.sgl_pair->A; - else - current_sgl = &stp_req->type.pio.request_current.sgl_pair->B; - - /* update the TC */ - task_context->command_iu_upper = current_sgl->address_upper; - task_context->command_iu_lower = current_sgl->address_lower; - task_context->transfer_length_bytes = length; - task_context->type.stp.fis_type = FIS_DATA; - - /* send the new TC out. */ - return scic_controller_continue_io(sci_req); -} - -static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req) -{ - - struct scu_sgl_element *current_sgl; - u32 sgl_offset; - u32 remaining_bytes_in_current_sgl = 0; - enum sci_status status = SCI_SUCCESS; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - sgl_offset = stp_req->type.pio.request_current.sgl_offset; - - if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); - remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset; - } else { - current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); - remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset; - } - - - if (stp_req->type.pio.pio_transfer_bytes > 0) { - if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { - /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ - status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl); - if (status == SCI_SUCCESS) { - stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; - - /* update the current sgl, sgl_offset and save for future */ - current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req); - sgl_offset = 0; - } - } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { - /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */ - scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes); - - if (status == SCI_SUCCESS) { - /* Sgl offset will be adjusted and saved for future */ - sgl_offset += stp_req->type.pio.pio_transfer_bytes; - current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes; - stp_req->type.pio.pio_transfer_bytes = 0; - } - } - } - - if (status == SCI_SUCCESS) { - stp_req->type.pio.request_current.sgl_offset = sgl_offset; - } - - return status; -} - -/** - * - * @stp_request: The request that is used for the SGL processing. - * @data_buffer: The buffer of data to be copied. - * @length: The length of the data transfer. - * - * Copy the data from the buffer for the length specified to the IO reqeust SGL - * specified data region. enum sci_status - */ -static enum sci_status -scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req, - u8 *data_buf, u32 len) -{ - struct scic_sds_request *sci_req; - struct isci_request *ireq; - u8 *src_addr; - int copy_len; - struct sas_task *task; - struct scatterlist *sg; - void *kaddr; - int total_len = len; - - sci_req = to_sci_req(stp_req); - ireq = sci_req_to_ireq(sci_req); - task = isci_request_access_task(ireq); - src_addr = data_buf; - - if (task->num_scatter > 0) { - sg = task->scatter; - - while (total_len > 0) { - struct page *page = sg_page(sg); - - copy_len = min_t(int, total_len, sg_dma_len(sg)); - kaddr = kmap_atomic(page, KM_IRQ0); - memcpy(kaddr + sg->offset, src_addr, copy_len); - kunmap_atomic(kaddr, KM_IRQ0); - total_len -= copy_len; - src_addr += copy_len; - sg = sg_next(sg); - } - } else { - BUG_ON(task->total_xfer_len < total_len); - memcpy(task->scatter, src_addr, total_len); - } - - return SCI_SUCCESS; -} - -/** - * - * @sci_req: The PIO DATA IN request that is to receive the data. - * @data_buffer: The buffer to copy from. - * - * Copy the data buffer to the io request data region. enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( - struct scic_sds_stp_request *sci_req, - u8 *data_buffer) -{ - enum sci_status status; - - /* - * If there is less than 1K remaining in the transfer request - * copy just the data for the transfer */ - if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { - status = scic_sds_stp_request_pio_data_in_copy_data_buffer( - sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes); - - if (status == SCI_SUCCESS) - sci_req->type.pio.pio_transfer_bytes = 0; - } else { - /* We are transfering the whole frame so copy */ - status = scic_sds_stp_request_pio_data_in_copy_data_buffer( - sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); - - if (status == SCI_SUCCESS) - sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; - } - - return status; -} - -/** - * - * @sci_req: - * @completion_code: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - break; - } - - return status; -} - -static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - struct scic_sds_controller *scic = sci_req->owning_controller; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(ireq); - struct dev_to_host_fis *frame_header; - enum sci_status status; - u32 *frame_buffer; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - - switch (frame_header->fis_type) { - case FIS_PIO_SETUP: - /* Get from the frame buffer the PIO Setup Data */ - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - /* Get the data from the PIO Setup The SCU Hardware returns - * first word in the frame_header and the rest of the data is in - * the frame buffer so we need to back up one dword - */ - - /* transfer_count: first 16bits in the 4th dword */ - stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; - - /* ending_status: 4th byte in the 3rd dword */ - stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - sci_req->stp.rsp.status = stp_req->type.pio.ending_status; - - /* The next state is dependent on whether the - * request was PIO Data-in or Data out - */ - if (task->data_dir == DMA_FROM_DEVICE) { - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); - } else if (task->data_dir == DMA_TO_DEVICE) { - /* Transmit data */ - status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); - if (status != SCI_SUCCESS) - break; - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); - } - break; - case FIS_SETDEVBITS: - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); - break; - case FIS_REGD2H: - if (frame_header->status & ATA_BUSY) { - /* Now why is the drive sending a D2H Register FIS when - * it is still busy? Do nothing since we are still in - * the right state. - */ - dev_dbg(scic_to_dev(scic), - "%s: SCIC PIO Request 0x%p received " - "D2H Register FIS with BSY status " - "0x%x\n", __func__, stp_req, - frame_header->status); - break; - } - - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.req, - frame_header, - frame_buffer); - - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - default: - /* FIXME: what do we do here? */ - break; - } - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - struct sata_fis_data *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - - if (frame_header->fis_type == FIS_DATA) { - if (stp_req->type.pio.request_current.sgl_pair == NULL) { - sci_req->saved_rx_frame_index = frame_index; - stp_req->type.pio.pio_transfer_bytes = 0; - } else { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, - (u8 *)frame_buffer); - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - } - - /* Check for the end of the transfer, are there more - * bytes remaining for this data transfer - */ - if (status != SCI_SUCCESS || - stp_req->type.pio.pio_transfer_bytes != 0) - return status; - - if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - } else { - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); - } - } else { - dev_err(scic_to_dev(scic), - "%s: SCIC PIO Request 0x%p received frame %d " - "with fis type 0x%02x when expecting a data " - "fis.\n", __func__, stp_req, frame_index, - frame_header->fis_type); - - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_GOOD, - SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - } - - return status; -} - - -/** - * - * @sci_req: - * @completion_code: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( - - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - bool all_frames_transferred = false; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - /* Transmit data */ - if (stp_req->type.pio.pio_transfer_bytes != 0) { - status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); - if (status == SCI_SUCCESS) { - if (stp_req->type.pio.pio_transfer_bytes == 0) - all_frames_transferred = true; - } - } else if (stp_req->type.pio.pio_transfer_bytes == 0) { - /* - * this will happen if the all data is written at the - * first time after the pio setup fis is received - */ - all_frames_transferred = true; - } - - /* all data transferred. */ - if (all_frames_transferred) { - /* - * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE - * and wait for PIO_SETUP fis / or D2H REg fis. */ - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); - } - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - break; - } - - return status; -} - -/** - * - * @request: This is the request which is receiving the event. - * @event_code: This is the event code that the request on which the request is - * expected to take action. - * - * This method will handle any link layer events while waiting for the data - * frame. enum sci_status SCI_SUCCESS SCI_FAILURE - */ -static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler( - struct scic_sds_request *request, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_specifier(event_code)) { - case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: - /* - * We are waiting for data and the SCU has R_ERR the data frame. - * Go back to waiting for the D2H Register FIS */ - sci_base_state_machine_change_state( - &request->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); - - status = SCI_SUCCESS; - break; - - default: - dev_err(scic_to_dev(request->owning_controller), - "%s: SCIC PIO Request 0x%p received unexpected " - "event 0x%08x\n", - __func__, request, event_code); - - /* / @todo Should we fail the PIO request when we get an unexpected event? */ - status = SCI_FAILURE; - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, - .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, - } -}; - -static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_pio_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req); -} - -static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_pio_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); -} - -static void scic_sds_stp_request_started_pio_data_in_await_data_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_pio_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE - ); -} - -static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_pio_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_await_frame_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_data_in_await_data_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_data_out_transmit_data_enter, - } -}; - -enum sci_status -scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, - bool copy_rx_frame) -{ - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; - - scic_sds_stp_non_ncq_request_construct(sci_req); - - scu_stp_raw_request_construct_task_context(stp_req, - sci_req->task_context_buffer); - - pio->current_transfer_bytes = 0; - pio->ending_error = 0; - pio->ending_status = 0; - - pio->request_current.sgl_offset = 0; - pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; - - if (copy_rx_frame) { - scic_sds_request_build_sgl(sci_req); - /* Since the IO request copy of the TC contains the same data as - * the actual TC this pointer is vaild for either. - */ - pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab; - } else { - /* The user does not want the data copied to the SGL buffer location */ - pio->request_current.sgl_pair = NULL; - } - - sci_base_state_machine_construct(&sci_req->started_substate_machine, - sci_req, - scic_sds_stp_request_started_pio_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE); - - return SCI_SUCCESS; -} - -static void scic_sds_stp_request_udma_complete_request( - struct scic_sds_request *request, - u32 scu_status, - enum sci_status sci_status) -{ - scic_sds_request_set_status(request, scu_status, sci_status); - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); -} - -static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - struct scic_sds_controller *scic = sci_req->owning_controller; - struct dev_to_host_fis *frame_header; - enum sci_status status; - u32 *frame_buffer; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if ((status == SCI_SUCCESS) && - (frame_header->fis_type == FIS_REGD2H)) { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - } - - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - break; - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): - /* - * We must check ther response buffer to see if the D2H Register FIS was - * received before we got the TC completion. */ - if (sci_req->stp.rsp.fis_type == FIS_REGD2H) { - scic_sds_remote_device_suspend(sci_req->target_device, - SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); - - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - } else { - /* - * If we have an error completion status for the TC then we can expect a - * D2H register FIS from the device so we must change state to wait for it */ - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE); - } - break; - - /* - * / @todo Check to see if any of these completion status need to wait for - * / the device to host register fis. */ - /* / @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0 */ - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): - scic_sds_remote_device_suspend(sci_req->target_device, - SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); - /* Fall through to the default case */ - default: - /* All other completion status cause the IO to be complete. */ - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - break; - } - - return status; -} - -static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - - /* Use the general frame handler to copy the resposne data */ - status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); - - if (status != SCI_SUCCESS) - return status; - - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, - .frame_handler = scic_sds_stp_request_udma_general_frame_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, - }, -}; - -static void scic_sds_stp_request_started_udma_await_tc_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_udma_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE - ); -} - -/** - * - * - * This state is entered when there is an TC completion failure. The hardware - * received an unexpected condition while processing the IO request and now - * will UF the D2H register FIS to complete the IO. - */ -static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_udma_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter, - }, -}; - -enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, - u32 len, - enum dma_data_direction dir) -{ - scic_sds_stp_non_ncq_request_construct(sci_req); - - scic_sds_stp_optimized_request_construct(sci_req, SCU_TASK_TYPE_DMA_IN, - len, dir); - - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - sci_req, - scic_sds_stp_request_started_udma_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE - ); - - return SCI_SUCCESS; -} - -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -/** - * - * @request: This parameter specifies the request for which a frame has been - * received. - * @frame_index: This parameter specifies the index of the frame that has been - * received. - * - * This method processes frames received from the target while waiting for a - * device to host register FIS. If a non-register FIS is received during this - * time, it is treated as a protocol violation from an IO perspective. Indicate - * if the received frame was processed successfully. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - - switch (frame_header->fis_type) { - case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - /* The command has completed with error */ - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", __func__, stp_req, - frame_index); - - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); - break; - } - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, - }, -}; - -static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_soft_reset_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req - ); -} - -static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - struct scu_task_context *task_context; - struct host_to_dev_fis *h2d_fis; - enum sci_status status; - - /* Clear the SRST bit */ - h2d_fis = &sci_req->stp.cmd; - h2d_fis->control = 0; - - /* Clear the TC control bit */ - task_context = scic_sds_controller_get_task_context_buffer( - sci_req->owning_controller, sci_req->io_tag); - task_context->control_frame = 0; - - status = scic_controller_continue_io(sci_req); - if (status == SCI_SUCCESS) { - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_soft_reset_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE - ); - } -} - -static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_soft_reset_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE - ); -} - -static const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_d2h_response_enter, - }, -}; - -enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req) -{ - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - scic_sds_stp_non_ncq_request_construct(sci_req); - - /* Build the STP task context structure */ - scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); - - sci_base_state_machine_construct(&sci_req->started_substate_machine, - sci_req, - scic_sds_stp_request_started_soft_reset_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); - - return SCI_SUCCESS; -} diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.h b/drivers/scsi/isci/core/scic_sds_stp_request.h deleted file mode 100644 index f5434f1..0000000 --- a/drivers/scsi/isci/core/scic_sds_stp_request.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_STP_REQUEST_T_ -#define _SCIC_SDS_STP_REQUEST_T_ - -#include -#include - -struct scic_sds_stp_request { - union { - u32 ncq; - - u32 udma; - - struct scic_sds_stp_pio_request { - /** - * Total transfer for the entire PIO request recorded at request constuction - * time. - * - * @todo Should we just decrement this value for each byte of data transitted - * or received to elemenate the current_transfer_bytes field? - */ - u32 total_transfer_bytes; - - /** - * Total number of bytes received/transmitted in data frames since the start - * of the IO request. At the end of the IO request this should equal the - * total_transfer_bytes. - */ - u32 current_transfer_bytes; - - /** - * The number of bytes requested in the in the PIO setup. - */ - u32 pio_transfer_bytes; - - /** - * PIO Setup ending status value to tell us if we need to wait for another FIS - * or if the transfer is complete. On the receipt of a D2H FIS this will be - * the status field of that FIS. - */ - u8 ending_status; - - /** - * On receipt of a D2H FIS this will be the ending error field if the - * ending_status has the SATA_STATUS_ERR bit set. - */ - u8 ending_error; - - struct scic_sds_request_pio_sgl { - struct scu_sgl_element_pair *sgl_pair; - u8 sgl_set; - u32 sgl_offset; - } request_current; - } pio; - - struct { - /** - * The number of bytes requested in the PIO setup before CDB data frame. - */ - u32 device_preferred_cdb_length; - } packet; - } type; -}; - -/** - * enum scic_sds_stp_request_started_udma_substates - This enumeration depicts - * the various sub-states associated with a SATA/STP UDMA protocol operation. - * - * - */ -enum scic_sds_stp_request_started_udma_substates { - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE, -}; - -/** - * enum scic_sds_stp_request_started_non_data_substates - This enumeration - * depicts the various sub-states associated with a SATA/STP non-data - * protocol operation. - * - * - */ -enum scic_sds_stp_request_started_non_data_substates { - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE, -}; - -/** - * enum scic_sds_stp_request_started_soft_reset_substates - THis enumeration - * depicts the various sub-states associated with a SATA/STP soft reset - * operation. - * - * - */ -enum scic_sds_stp_request_started_soft_reset_substates { - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE, -}; - -u32 scic_sds_stp_request_get_object_size(void); - -enum sci_status scic_sds_stp_pio_request_construct( - struct scic_sds_request *scic_io_request, - bool copy_rx_frame); - -enum sci_status scic_sds_stp_udma_request_construct( - struct scic_sds_request *sci_req, - u32 transfer_length, - enum dma_data_direction dir); - -enum sci_status scic_sds_stp_non_data_request_construct( - struct scic_sds_request *sci_req); - -enum sci_status scic_sds_stp_soft_reset_request_construct( - struct scic_sds_request *sci_req); - -enum sci_status scic_sds_stp_ncq_request_construct( - struct scic_sds_request *sci_req, - u32 transfer_length, - enum dma_data_direction dir); - - -#endif /* _SCIC_SDS_STP_REQUEST_T_ */ diff --git a/drivers/scsi/isci/core/scic_task_request.h b/drivers/scsi/isci/core/scic_task_request.h deleted file mode 100644 index 790cee9..0000000 --- a/drivers/scsi/isci/core/scic_task_request.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_TASK_REQUEST_H_ -#define _SCIC_TASK_REQUEST_H_ - -#include "isci.h" - -struct scic_sds_request; -struct scic_sds_remote_device; -struct scic_sds_controller; - - -enum sci_status scic_task_request_construct( - struct scic_sds_controller *scic_controller, - struct scic_sds_remote_device *scic_remote_device, - u16 io_tag, struct scic_sds_request *sci_req); - -/** - * scic_task_request_construct_ssp() - This method is called by the SCI user to - * construct all SCI Core SSP task management requests. Memory - * initialization and functionality common to all task request types is - * performed in this method. - * @scic_task_request: This parameter specifies the handle to the core task - * request object for which to construct a SATA specific task management - * request. - * - * Indicate if the controller successfully built the task request. SCI_SUCCESS - * This value is returned if the task request was successfully built. - */ -enum sci_status scic_task_request_construct_ssp( - struct scic_sds_request *scic_task_request); - -/** - * scic_task_request_construct_sata() - This method is called by the SCI user - * to construct all SCI Core SATA task management requests. Memory - * initialization and functionality common to all task request types is - * performed in this method. - * @scic_task_request_handle: This parameter specifies the handle to the core - * task request object for which to construct a SATA specific task - * management request. - * - * Indicate if the controller successfully built the task request. SCI_SUCCESS - * This value is returned if the task request was successfully built. - */ -enum sci_status scic_task_request_construct_sata( - struct scic_sds_request *scic_task_request_handle); - - - -#endif /* _SCIC_TASK_REQUEST_H_ */ - diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 71a0466..e1930da 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -61,9 +61,7 @@ #include "probe_roms.h" #include "remote_device.h" #include "request.h" -#include "scic_io_request.h" #include "scic_sds_port_configuration_agent.h" -#include "sci_util.h" #include "scu_completion_codes.h" #include "scu_event_codes.h" #include "registers.h" diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index d288897..69826ea 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -521,6 +521,25 @@ enum sci_task_status { }; +/** + * sci_swab32_cpy - convert between scsi and scu-hardware byte format + * @dest: receive the 4-byte endian swapped version of src + * @src: word aligned source buffer + * + * scu hardware handles SSP/SMP control, response, and unidentified + * frames in "big endian dword" order. Regardless of host endian this + * is always a swab32()-per-dword conversion of the standard definition, + * i.e. single byte fields swapped and multi-byte fields in little- + * endian + */ +static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt) +{ + u32 *dest = _dest, *src = _src; + + while (--word_cnt >= 0) + dest[word_cnt] = swab32(src[word_cnt]); +} + extern unsigned char no_outbound_task_to; extern u16 ssp_max_occ_to; extern u16 stp_max_occ_to; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index f44fa20..d4bf6d2 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -55,7 +55,6 @@ #include #include "isci.h" -#include "scic_io_request.h" #include "scic_phy.h" #include "scic_sds_phy.h" #include "scic_port.h" diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 00334b9..2339010 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -57,14 +57,11 @@ #include "port.h" #include "remote_device.h" #include "request.h" -#include "scic_io_request.h" #include "scic_phy.h" #include "scic_port.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" -#include "scic_sds_request.h" -#include "sci_util.h" #include "scu_event_codes.h" #include "task.h" diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 5891f3d..35231e7 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -58,7 +58,6 @@ #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" -#include "sci_util.h" #include "scu_event_codes.h" #include "scu_task_context.h" diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c index 80f44c2..6b9465a 100644 --- a/drivers/scsi/isci/remote_node_table.c +++ b/drivers/scsi/isci/remote_node_table.c @@ -59,7 +59,6 @@ * * */ -#include "sci_util.h" #include "remote_node_table.h" #include "remote_node_context.h" diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 4961ee3..857ad06 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -54,898 +54,1286 @@ */ #include "isci.h" -#include "scic_io_request.h" -#include "scic_task_request.h" #include "scic_port.h" #include "task.h" #include "request.h" #include "sata.h" #include "scu_completion_codes.h" -#include "scic_sds_request.h" #include "sas.h" -static enum sci_status isci_request_ssp_request_construct( - struct isci_request *request) -{ - enum sci_status status; +/** + * This method returns the sgl element pair for the specificed sgl_pair index. + * @sci_req: This parameter specifies the IO request for which to retrieve + * the Scatter-Gather List element pair. + * @sgl_pair_index: This parameter specifies the index into the SGL element + * pair to be retrieved. + * + * This method returns a pointer to an struct scu_sgl_element_pair. + */ +static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( + struct scic_sds_request *sci_req, + u32 sgl_pair_index + ) { + struct scu_task_context *task_context; + + task_context = (struct scu_task_context *)sci_req->task_context_buffer; + + if (sgl_pair_index == 0) { + return &task_context->sgl_pair_ab; + } else if (sgl_pair_index == 1) { + return &task_context->sgl_pair_cd; + } - dev_dbg(&request->isci_host->pdev->dev, - "%s: request = %p\n", - __func__, - request); - status = scic_io_request_construct_basic_ssp(&request->sci); - return status; + return &sci_req->sg_table[sgl_pair_index - 2]; } -static enum sci_status isci_request_stp_request_construct( - struct isci_request *request) +/** + * This function will build the SGL list for an IO request. + * @sci_req: This parameter specifies the IO request for which to build + * the Scatter-Gather List. + * + */ +void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) { - struct sas_task *task = isci_request_access_task(request); - enum sci_status status; - struct host_to_dev_fis *register_fis; - - dev_dbg(&request->isci_host->pdev->dev, - "%s: request = %p\n", - __func__, - request); + struct isci_request *isci_request = sci_req_to_ireq(sds_request); + struct isci_host *isci_host = isci_request->isci_host; + struct sas_task *task = isci_request_access_task(isci_request); + struct scatterlist *sg = NULL; + dma_addr_t dma_addr; + u32 sg_idx = 0; + struct scu_sgl_element_pair *scu_sg = NULL; + struct scu_sgl_element_pair *prev_sg = NULL; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (sg) { + scu_sg = scic_sds_request_get_sgl_element_pair( + sds_request, + sg_idx); + + SCU_SGL_COPY(scu_sg->A, sg); + + sg = sg_next(sg); + + if (sg) { + SCU_SGL_COPY(scu_sg->B, sg); + sg = sg_next(sg); + } else + SCU_SGL_ZERO(scu_sg->B); + + if (prev_sg) { + dma_addr = + scic_io_request_get_dma_addr( + sds_request, + scu_sg); + + prev_sg->next_pair_upper = + upper_32_bits(dma_addr); + prev_sg->next_pair_lower = + lower_32_bits(dma_addr); + } + + prev_sg = scu_sg; + sg_idx++; + } + } else { /* handle when no sg */ + scu_sg = scic_sds_request_get_sgl_element_pair(sds_request, + sg_idx); - /* Get the host_to_dev_fis from the core and copy - * the fis from the task into it. - */ - register_fis = isci_sata_task_to_fis_copy(task); + dma_addr = dma_map_single(&isci_host->pdev->dev, + task->scatter, + task->total_xfer_len, + task->data_dir); - status = scic_io_request_construct_basic_sata(&request->sci); + isci_request->zero_scatter_daddr = dma_addr; - /* Set the ncq tag in the fis, from the queue - * command in the task. - */ - if (isci_sata_is_task_ncq(task)) { + scu_sg->A.length = task->total_xfer_len; + scu_sg->A.address_upper = upper_32_bits(dma_addr); + scu_sg->A.address_lower = lower_32_bits(dma_addr); + } - isci_sata_set_ncq_tag( - register_fis, - task - ); + if (scu_sg) { + scu_sg->next_pair_upper = 0; + scu_sg->next_pair_lower = 0; } +} - return status; +static void scic_sds_ssp_io_request_assign_buffers(struct scic_sds_request *sci_req) +{ + if (sci_req->was_tag_assigned_by_user == false) + sci_req->task_context_buffer = &sci_req->tc; } -/* - * isci_smp_request_build() - This function builds the smp request. - * @ireq: This parameter points to the isci_request allocated in the - * request construct function. - * - * SCI_SUCCESS on successfull completion, or specific failure code. - */ -static enum sci_status isci_smp_request_build(struct isci_request *ireq) +static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req) { - enum sci_status status = SCI_FAILURE; + struct ssp_cmd_iu *cmd_iu; + struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); - struct scic_sds_request *sci_req = &ireq->sci; - dev_dbg(&ireq->isci_host->pdev->dev, - "%s: request = %p\n", __func__, ireq); + cmd_iu = &sci_req->ssp.cmd; - dev_dbg(&ireq->isci_host->pdev->dev, - "%s: smp_req len = %d\n", - __func__, - task->smp_task.smp_req.length); + memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8); + cmd_iu->add_cdb_len = 0; + cmd_iu->_r_a = 0; + cmd_iu->_r_b = 0; + cmd_iu->en_fburst = 0; /* unsupported */ + cmd_iu->task_prio = task->ssp_task.task_prio; + cmd_iu->task_attr = task->ssp_task.task_attr; + cmd_iu->_r_c = 0; - /* copy the smp_command to the address; */ - sg_copy_to_buffer(&task->smp_task.smp_req, 1, - &sci_req->smp.cmd, - sizeof(struct smp_req)); + sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cdb, + sizeof(task->ssp_task.cdb) / sizeof(u32)); +} - status = scic_io_request_construct_smp(sci_req); - if (status != SCI_SUCCESS) - dev_warn(&ireq->isci_host->pdev->dev, - "%s: failed with status = %d\n", - __func__, - status); +static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci_req) +{ + struct ssp_task_iu *task_iu; + struct isci_request *ireq = sci_req_to_ireq(sci_req); + struct sas_task *task = isci_request_access_task(ireq); + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - return status; + task_iu = &sci_req->ssp.tmf; + + memset(task_iu, 0, sizeof(struct ssp_task_iu)); + + memcpy(task_iu->LUN, task->ssp_task.LUN, 8); + + task_iu->task_func = isci_tmf->tmf_code; + task_iu->task_tag = + (ireq->ttype == tmf_task) ? + isci_tmf->io_tag : + SCI_CONTROLLER_INVALID_IO_TAG; } /** - * isci_io_request_build() - This function builds the io request object. - * @isci_host: This parameter specifies the ISCI host object - * @request: This parameter points to the isci_request object allocated in the - * request construct function. - * @sci_device: This parameter is the handle for the sci core's remote device - * object that is the destination for this request. + * This method is will fill in the SCU Task Context for any type of SSP request. + * @sci_req: + * @task_context: * - * SCI_SUCCESS on successfull completion, or specific failure code. */ -static enum sci_status isci_io_request_build( - struct isci_host *isci_host, - struct isci_request *request, - struct isci_remote_device *isci_device) +static void scu_ssp_reqeust_construct_task_context( + struct scic_sds_request *sds_request, + struct scu_task_context *task_context) { - enum sci_status status = SCI_SUCCESS; - struct sas_task *task = isci_request_access_task(request); - struct scic_sds_remote_device *sci_device = &isci_device->sci; + dma_addr_t dma_addr; + struct scic_sds_controller *controller; + struct scic_sds_remote_device *target_device; + struct scic_sds_port *target_port; + + controller = scic_sds_request_get_controller(sds_request); + target_device = scic_sds_request_get_device(sds_request); + target_port = scic_sds_request_get_port(sds_request); + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = target_device->connection_rate; + task_context->protocol_engine_index = + scic_sds_controller_get_protocol_engine_group(controller); + task_context->logical_port_index = + scic_sds_port_get_index(target_port); + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = + scic_sds_remote_device_get_index(sds_request->target_device); + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + + /* task_context->type.ssp.tag = sci_req->io_tag; */ + task_context->task_phase = 0x01; + + if (sds_request->was_tag_assigned_by_user) { + /* + * Build the task context now since we have already read + * the data + */ + sds_request->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + scic_sds_io_tag_get_index(sds_request->io_tag)); + } else { + /* + * Build the task context now since we have already read + * the data + * + * I/O tag index is not assigned because we have to wait + * until we get a TCi + */ + sds_request->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + owning_controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); + } - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = 0x%p; request = %p, " - "num_scatter = %d\n", - __func__, - isci_device, - request, - task->num_scatter); + /* + * Copy the physical address for the command buffer to the + * SCU Task Context + */ + dma_addr = scic_io_request_get_dma_addr(sds_request, + &sds_request->ssp.cmd); - /* map the sgl addresses, if present. - * libata does the mapping for sata devices - * before we get the request. + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* + * Copy the physical address for the response buffer to the + * SCU Task Context */ - if (task->num_scatter && - !sas_protocol_ata(task->task_proto) && - !(SAS_PROTOCOL_SMP & task->task_proto)) { + dma_addr = scic_io_request_get_dma_addr(sds_request, + &sds_request->ssp.rsp); - request->num_sg_entries = dma_map_sg( - &isci_host->pdev->dev, - task->scatter, - task->num_scatter, - task->data_dir - ); + task_context->response_iu_upper = upper_32_bits(dma_addr); + task_context->response_iu_lower = lower_32_bits(dma_addr); +} - if (request->num_sg_entries == 0) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - } +/** + * This method is will fill in the SCU Task Context for a SSP IO request. + * @sci_req: + * + */ +static void scu_ssp_io_request_construct_task_context( + struct scic_sds_request *sci_req, + enum dma_data_direction dir, + u32 len) +{ + struct scu_task_context *task_context; - /* build the common request object. For now, - * we will let the core allocate the IO tag. - */ - status = scic_io_request_construct(&isci_host->sci, sci_device, - SCI_CONTROLLER_INVALID_IO_TAG, - &request->sci); + task_context = scic_sds_request_get_task_context(sci_req); - if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "%s: failed request construct\n", - __func__); - return SCI_FAILURE; - } + scu_ssp_reqeust_construct_task_context(sci_req, task_context); - switch (task->task_proto) { - case SAS_PROTOCOL_SMP: - status = isci_smp_request_build(request); - break; - case SAS_PROTOCOL_SSP: - status = isci_request_ssp_request_construct(request); + task_context->ssp_command_iu_length = + sizeof(struct ssp_cmd_iu) / sizeof(u32); + task_context->type.ssp.frame_type = SSP_COMMAND; + + switch (dir) { + case DMA_FROM_DEVICE: + case DMA_NONE: + default: + task_context->task_type = SCU_TASK_TYPE_IOREAD; break; - case SAS_PROTOCOL_SATA: - case SAS_PROTOCOL_STP: - case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: - status = isci_request_stp_request_construct(request); + case DMA_TO_DEVICE: + task_context->task_type = SCU_TASK_TYPE_IOWRITE; break; - default: - dev_warn(&isci_host->pdev->dev, - "%s: unknown protocol\n", __func__); - return SCI_FAILURE; } - return SCI_SUCCESS; + task_context->transfer_length_bytes = len; + + if (task_context->transfer_length_bytes > 0) + scic_sds_request_build_sgl(sci_req); } +static void scic_sds_ssp_task_request_assign_buffers(struct scic_sds_request *sci_req) +{ + if (sci_req->was_tag_assigned_by_user == false) + sci_req->task_context_buffer = &sci_req->tc; +} /** - * isci_request_alloc_core() - This function gets the request object from the - * isci_host dma cache. - * @isci_host: This parameter specifies the ISCI host object - * @isci_request: This parameter will contain the pointer to the new - * isci_request object. - * @isci_device: This parameter is the pointer to the isci remote device object - * that is the destination for this request. - * @gfp_flags: This parameter specifies the os allocation flags. + * This method will fill in the SCU Task Context for a SSP Task request. The + * following important settings are utilized: -# priority == + * SCU_TASK_PRIORITY_HIGH. This ensures that the task request is issued + * ahead of other task destined for the same Remote Node. -# task_type == + * SCU_TASK_TYPE_IOREAD. This simply indicates that a normal request type + * (i.e. non-raw frame) is being utilized to perform task management. -# + * control_frame == 1. This ensures that the proper endianess is set so + * that the bytes are transmitted in the right order for a task frame. + * @sci_req: This parameter specifies the task request object being + * constructed. * - * SCI_SUCCESS on successfull completion, or specific failure code. */ -static int isci_request_alloc_core( - struct isci_host *isci_host, - struct isci_request **isci_request, - struct isci_remote_device *isci_device, - gfp_t gfp_flags) +static void scu_ssp_task_request_construct_task_context( + struct scic_sds_request *sci_req) { - int ret = 0; - dma_addr_t handle; - struct isci_request *request; - - - /* get pointer to dma memory. This actually points - * to both the isci_remote_device object and the - * sci object. The isci object is at the beginning - * of the memory allocated here. - */ - request = dma_pool_alloc(isci_host->dma_pool, gfp_flags, &handle); - if (!request) { - dev_warn(&isci_host->pdev->dev, - "%s: dma_pool_alloc returned NULL\n", __func__); - return -ENOMEM; - } - - /* initialize the request object. */ - spin_lock_init(&request->state_lock); - request->request_daddr = handle; - request->isci_host = isci_host; - request->isci_device = isci_device; - request->io_request_completion = NULL; - request->terminated = false; - - request->num_sg_entries = 0; - - request->complete_in_target = false; + struct scu_task_context *task_context; - INIT_LIST_HEAD(&request->completed_node); - INIT_LIST_HEAD(&request->dev_node); + task_context = scic_sds_request_get_task_context(sci_req); - *isci_request = request; - isci_request_change_state(request, allocated); + scu_ssp_reqeust_construct_task_context(sci_req, task_context); - return ret; + task_context->control_frame = 1; + task_context->priority = SCU_TASK_PRIORITY_HIGH; + task_context->task_type = SCU_TASK_TYPE_RAW_FRAME; + task_context->transfer_length_bytes = 0; + task_context->type.ssp.frame_type = SSP_TASK; + task_context->ssp_command_iu_length = + sizeof(struct ssp_task_iu) / sizeof(u32); } -static int isci_request_alloc_io( - struct isci_host *isci_host, - struct sas_task *task, - struct isci_request **isci_request, - struct isci_remote_device *isci_device, - gfp_t gfp_flags) -{ - int retval = isci_request_alloc_core(isci_host, isci_request, - isci_device, gfp_flags); - if (!retval) { - (*isci_request)->ttype_ptr.io_task_ptr = task; - (*isci_request)->ttype = io_task; +/** + * This method constructs the SSP Command IU data for this ssp passthrough + * comand request object. + * @sci_req: This parameter specifies the request object for which the SSP + * command information unit is being built. + * + * enum sci_status, returns invalid parameter is cdb > 16 + */ - task->lldd_task = *isci_request; - } - return retval; -} /** - * isci_request_alloc_tmf() - This function gets the request object from the - * isci_host dma cache and initializes the relevant fields as a sas_task. - * @isci_host: This parameter specifies the ISCI host object - * @sas_task: This parameter is the task struct from the upper layer driver. - * @isci_request: This parameter will contain the pointer to the new - * isci_request object. - * @isci_device: This parameter is the pointer to the isci remote device object - * that is the destination for this request. - * @gfp_flags: This parameter specifies the os allocation flags. + * This method constructs the SATA request object. + * @sci_req: + * @sat_protocol: + * @transfer_length: + * @data_direction: + * @copy_rx_frame: * - * SCI_SUCCESS on successfull completion, or specific failure code. + * enum sci_status */ -int isci_request_alloc_tmf( - struct isci_host *isci_host, - struct isci_tmf *isci_tmf, - struct isci_request **isci_request, - struct isci_remote_device *isci_device, - gfp_t gfp_flags) +static enum sci_status +scic_io_request_construct_sata(struct scic_sds_request *sci_req, + u32 len, + enum dma_data_direction dir, + bool copy) { - int retval = isci_request_alloc_core(isci_host, isci_request, - isci_device, gfp_flags); + enum sci_status status = SCI_SUCCESS; + struct isci_request *ireq = sci_req_to_ireq(sci_req); + struct sas_task *task = isci_request_access_task(ireq); - if (!retval) { + /* check for management protocols */ + if (ireq->ttype == tmf_task) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); - (*isci_request)->ttype_ptr.tmf_task_ptr = isci_tmf; - (*isci_request)->ttype = tmf_task; + if (tmf->tmf_code == isci_tmf_sata_srst_high || + tmf->tmf_code == isci_tmf_sata_srst_low) + return scic_sds_stp_soft_reset_request_construct(sci_req); + else { + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: Request 0x%p received un-handled SAT " + "management protocol 0x%x.\n", + __func__, sci_req, tmf->tmf_code); + + return SCI_FAILURE; + } } - return retval; -} -/** - * isci_request_execute() - This function allocates the isci_request object, - * all fills in some common fields. - * @isci_host: This parameter specifies the ISCI host object - * @sas_task: This parameter is the task struct from the upper layer driver. - * @isci_request: This parameter will contain the pointer to the new - * isci_request object. - * @gfp_flags: This parameter specifies the os allocation flags. - * - * SCI_SUCCESS on successfull completion, or specific failure code. - */ -int isci_request_execute( - struct isci_host *isci_host, - struct sas_task *task, - struct isci_request **isci_request, - gfp_t gfp_flags) + if (!sas_protocol_ata(task->task_proto)) { + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: Non-ATA protocol in SATA path: 0x%x\n", + __func__, + task->task_proto); + return SCI_FAILURE; + + } + + /* non data */ + if (task->data_dir == DMA_NONE) + return scic_sds_stp_non_data_request_construct(sci_req); + + /* NCQ */ + if (task->ata_task.use_ncq) + return scic_sds_stp_ncq_request_construct(sci_req, len, dir); + + /* DMA */ + if (task->ata_task.dma_xfer) + return scic_sds_stp_udma_request_construct(sci_req, len, dir); + else /* PIO */ + return scic_sds_stp_pio_request_construct(sci_req, copy); + + return status; +} + +static enum sci_status scic_io_request_construct_basic_ssp(struct scic_sds_request *sci_req) { - int ret = 0; - struct scic_sds_remote_device *sci_device; - enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - struct isci_remote_device *isci_device; - struct isci_request *request; - unsigned long flags; + struct isci_request *ireq = sci_req_to_ireq(sci_req); + struct sas_task *task = isci_request_access_task(ireq); - isci_device = task->dev->lldd_dev; - sci_device = &isci_device->sci; + sci_req->protocol = SCIC_SSP_PROTOCOL; - /* do common allocation and init of request object. */ - ret = isci_request_alloc_io( - isci_host, - task, - &request, - isci_device, - gfp_flags - ); + scu_ssp_io_request_construct_task_context(sci_req, + task->data_dir, + task->total_xfer_len); - if (ret) - goto out; + scic_sds_io_request_build_ssp_command_iu(sci_req); - status = isci_io_request_build(isci_host, request, isci_device); - if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, - "%s: request_construct failed - status = 0x%x\n", - __func__, - status); - goto out; - } + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); - spin_lock_irqsave(&isci_host->scic_lock, flags); + return SCI_SUCCESS; +} - /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io(&isci_host->sci, sci_device, - &request->sci, - SCI_CONTROLLER_INVALID_IO_TAG); - if (status != SCI_SUCCESS && - status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - dev_warn(&isci_host->pdev->dev, - "%s: failed request start (0x%x)\n", - __func__, status); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - goto out; - } +enum sci_status scic_task_request_construct_ssp( + struct scic_sds_request *sci_req) +{ + /* Construct the SSP Task SCU Task Context */ + scu_ssp_task_request_construct_task_context(sci_req); - /* Either I/O started OK, or the core has signaled that - * the device needs a target reset. - * - * In either case, hold onto the I/O for later. - * - * Update it's status and add it to the list in the - * remote device object. - */ - isci_request_change_state(request, started); - list_add(&request->dev_node, &isci_device->reqs_in_process); + /* Fill in the SSP Task IU */ + scic_sds_task_request_build_ssp_task_iu(sci_req); - if (status == SCI_SUCCESS) { - /* Save the tag for possible task mgmt later. */ - request->io_tag = scic_io_request_get_io_tag(&request->sci); - } else { - /* The request did not really start in the - * hardware, so clear the request handle - * here so no terminations will be done. - */ - request->terminated = true; - } - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); - if (status == - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - /* Signal libsas that we need the SCSI error - * handler thread to work on this I/O and that - * we want a device reset. - */ - spin_lock_irqsave(&task->task_state_lock, flags); - task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; - spin_unlock_irqrestore(&task->task_state_lock, flags); + return SCI_SUCCESS; +} - /* Cause this task to be scheduled in the SCSI error - * handler thread. - */ - isci_execpath_callback(isci_host, task, - sas_task_abort); - /* Change the status, since we are holding - * the I/O until it is managed by the SCSI - * error handler. - */ - status = SCI_SUCCESS; - } +static enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sci_req) +{ + enum sci_status status; + struct scic_sds_stp_request *stp_req; + bool copy = false; + struct isci_request *isci_request = sci_req_to_ireq(sci_req); + struct sas_task *task = isci_request_access_task(isci_request); - out: - if (status != SCI_SUCCESS) { - /* release dma memory on failure. */ - isci_request_free(isci_host, request); - request = NULL; - ret = SCI_FAILURE; - } + stp_req = &sci_req->stp.req; + sci_req->protocol = SCIC_STP_PROTOCOL; - *isci_request = request; - return ret; + copy = (task->data_dir == DMA_NONE) ? false : true; + + status = scic_io_request_construct_sata(sci_req, + task->total_xfer_len, + task->data_dir, + copy); + + if (status == SCI_SUCCESS) + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); + + return status; } +enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req) +{ + enum sci_status status = SCI_SUCCESS; + struct isci_request *ireq = sci_req_to_ireq(sci_req); + + /* check for management protocols */ + if (ireq->ttype == tmf_task) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + + if (tmf->tmf_code == isci_tmf_sata_srst_high || + tmf->tmf_code == isci_tmf_sata_srst_low) { + status = scic_sds_stp_soft_reset_request_construct(sci_req); + } else { + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: Request 0x%p received un-handled SAT " + "Protocol 0x%x.\n", + __func__, sci_req, tmf->tmf_code); + + return SCI_FAILURE; + } + } + + if (status == SCI_SUCCESS) + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); + + return status; +} + /** - * isci_request_process_response_iu() - This function sets the status and - * response iu, in the task struct, from the request object for the upper - * layer driver. - * @sas_task: This parameter is the task struct from the upper layer driver. - * @resp_iu: This parameter points to the response iu of the completed request. - * @dev: This parameter specifies the linux device struct. - * - * none. + * sci_req_tx_bytes - bytes transferred when reply underruns request + * @sci_req: request that was terminated early */ -static void isci_request_process_response_iu( - struct sas_task *task, - struct ssp_response_iu *resp_iu, - struct device *dev) +#define SCU_TASK_CONTEXT_SRAM 0x200000 +static u32 sci_req_tx_bytes(struct scic_sds_request *sci_req) { - dev_dbg(dev, - "%s: resp_iu = %p " - "resp_iu->status = 0x%x,\nresp_iu->datapres = %d " - "resp_iu->response_data_len = %x, " - "resp_iu->sense_data_len = %x\nrepsonse data: ", + struct scic_sds_controller *scic = sci_req->owning_controller; + u32 ret_val = 0; + + if (readl(&scic->smu_registers->address_modifier) == 0) { + void __iomem *scu_reg_base = scic->scu_registers; + + /* get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where + * BAR1 is the scu_registers + * 0x20002C = 0x200000 + 0x2c + * = start of task context SRAM + offset of (type.ssp.data_offset) + * TCi is the io_tag of struct scic_sds_request + */ + ret_val = readl(scu_reg_base + + (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + + ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(sci_req->io_tag))); + } + + return ret_val; +} + +enum sci_status +scic_sds_request_start(struct scic_sds_request *request) +{ + if (request->device_sequence != + scic_sds_remote_device_get_sequence(request->target_device)) + return SCI_FAILURE; + + if (request->state_handlers->start_handler) + return request->state_handlers->start_handler(request); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request requested to start while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state(&request->state_machine)); + + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status +scic_sds_io_request_terminate(struct scic_sds_request *request) +{ + if (request->state_handlers->abort_handler) + return request->state_handlers->abort_handler(request); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request requested to abort while in wrong " + "state %d\n", __func__, - resp_iu, - resp_iu->status, - resp_iu->datapres, - resp_iu->response_data_len, - resp_iu->sense_data_len); + sci_base_state_machine_get_state(&request->state_machine)); - task->task_status.stat = resp_iu->status; + return SCI_FAILURE_INVALID_STATE; +} - /* libsas updates the task status fields based on the response iu. */ - sas_ssp_task_response(dev, task, resp_iu); +enum sci_status scic_sds_io_request_event_handler( + struct scic_sds_request *request, + u32 event_code) +{ + if (request->state_handlers->event_handler) + return request->state_handlers->event_handler(request, event_code); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request given event code notification %x while " + "in wrong state %d\n", + __func__, + event_code, + sci_base_state_machine_get_state(&request->state_machine)); + + return SCI_FAILURE_INVALID_STATE; } /** - * isci_request_set_open_reject_status() - This function prepares the I/O - * completion for OPEN_REJECT conditions. - * @request: This parameter is the completed isci_request object. - * @response_ptr: This parameter specifies the service response for the I/O. - * @status_ptr: This parameter specifies the exec status for the I/O. - * @complete_to_host_ptr: This parameter specifies the action to be taken by - * the LLDD with respect to completing this request or forcing an abort - * condition on the I/O. - * @open_rej_reason: This parameter specifies the encoded reason for the - * abandon-class reject. * - * none. + * @sci_req: The SCIC_SDS_IO_REQUEST_T object for which the start + * operation is to be executed. + * @frame_index: The frame index returned by the hardware for the reqeust + * object. + * + * This method invokes the core state frame handler for the + * SCIC_SDS_IO_REQUEST_T object. enum sci_status */ -static void isci_request_set_open_reject_status( - struct isci_request *request, - struct sas_task *task, - enum service_response *response_ptr, - enum exec_status *status_ptr, - enum isci_completion_selection *complete_to_host_ptr, - enum sas_open_rej_reason open_rej_reason) +enum sci_status scic_sds_io_request_frame_handler( + struct scic_sds_request *request, + u32 frame_index) { - /* Task in the target is done. */ - request->complete_in_target = true; - *response_ptr = SAS_TASK_UNDELIVERED; - *status_ptr = SAS_OPEN_REJECT; - *complete_to_host_ptr = isci_perform_normal_io_completion; - task->task_status.open_rej_reason = open_rej_reason; + if (request->state_handlers->frame_handler) + return request->state_handlers->frame_handler(request, frame_index); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request given unexpected frame %x while in " + "state %d\n", + __func__, + frame_index, + sci_base_state_machine_get_state(&request->state_machine)); + + scic_sds_controller_release_frame(request->owning_controller, frame_index); + return SCI_FAILURE_INVALID_STATE; } -/** - * isci_request_handle_controller_specific_errors() - This function decodes - * controller-specific I/O completion error conditions. - * @request: This parameter is the completed isci_request object. - * @response_ptr: This parameter specifies the service response for the I/O. - * @status_ptr: This parameter specifies the exec status for the I/O. - * @complete_to_host_ptr: This parameter specifies the action to be taken by - * the LLDD with respect to completing this request or forcing an abort - * condition on the I/O. - * - * none. +/* + * This function copies response data for requests returning response data + * instead of sense data. + * @sci_req: This parameter specifies the request object for which to copy + * the response data. */ -static void isci_request_handle_controller_specific_errors( - struct isci_remote_device *isci_device, - struct isci_request *request, - struct sas_task *task, - enum service_response *response_ptr, - enum exec_status *status_ptr, - enum isci_completion_selection *complete_to_host_ptr) +void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) { - unsigned int cstatus; + void *resp_buf; + u32 len; + struct ssp_response_iu *ssp_response; + struct isci_request *ireq = sci_req_to_ireq(sci_req); + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - cstatus = scic_request_get_controller_status(&request->sci); + ssp_response = &sci_req->ssp.rsp; - dev_dbg(&request->isci_host->pdev->dev, - "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR " - "- controller status = 0x%x\n", - __func__, request, cstatus); + resp_buf = &isci_tmf->resp.resp_iu; - /* Decode the controller-specific errors; most - * important is to recognize those conditions in which - * the target may still have a task outstanding that - * must be aborted. - * - * Note that there are SCU completion codes being - * named in the decode below for which SCIC has already - * done work to handle them in a way other than as - * a controller-specific completion code; these are left - * in the decode below for completeness sake. - */ - switch (cstatus) { - case SCU_TASK_DONE_DMASETUP_DIRERR: - /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */ - case SCU_TASK_DONE_XFERCNT_ERR: - /* Also SCU_TASK_DONE_SMP_UFI_ERR: */ - if (task->task_proto == SAS_PROTOCOL_SMP) { - /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */ - *response_ptr = SAS_TASK_COMPLETE; + len = min_t(u32, + SSP_RESP_IU_MAX_SIZE, + be32_to_cpu(ssp_response->response_data_len)); - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) - *status_ptr = SAS_DEVICE_UNKNOWN; - else - *status_ptr = SAS_ABORTED_TASK; + memcpy(resp_buf, ssp_response->resp_data, len); +} - request->complete_in_target = true; +/* + * This method implements the action taken when a constructed + * SCIC_SDS_IO_REQUEST_T object receives a scic_sds_request_start() request. + * This method will, if necessary, allocate a TCi for the io request object and + * then will, if necessary, copy the constructed TC data into the actual TC + * buffer. If everything is successful the post context field is updated with + * the TCi so the controller can post the request to the hardware. enum sci_status + * SCI_SUCCESS SCI_FAILURE_INSUFFICIENT_RESOURCES + */ +static enum sci_status scic_sds_request_constructed_state_start_handler( + struct scic_sds_request *request) +{ + struct scu_task_context *task_context; - *complete_to_host_ptr = - isci_perform_normal_io_completion; - } else { - /* Task in the target is not done. */ - *response_ptr = SAS_TASK_UNDELIVERED; + if (request->io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + request->io_tag = + scic_controller_allocate_io_tag(request->owning_controller); + } - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) - *status_ptr = SAS_DEVICE_UNKNOWN; - else - *status_ptr = SAM_STAT_TASK_ABORTED; + /* Record the IO Tag in the request */ + if (request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { + task_context = request->task_context_buffer; - request->complete_in_target = false; + task_context->task_index = scic_sds_io_tag_get_index(request->io_tag); - *complete_to_host_ptr = - isci_perform_error_io_completion; - } + switch (task_context->protocol_type) { + case SCU_TASK_CONTEXT_PROTOCOL_SMP: + case SCU_TASK_CONTEXT_PROTOCOL_SSP: + /* SSP/SMP Frame */ + task_context->type.ssp.tag = request->io_tag; + task_context->type.ssp.target_port_transfer_tag = 0xFFFF; + break; - break; + case SCU_TASK_CONTEXT_PROTOCOL_STP: + /* + * STP/SATA Frame + * task_context->type.stp.ncq_tag = request->ncq_tag; */ + break; - case SCU_TASK_DONE_CRC_ERR: - case SCU_TASK_DONE_NAK_CMD_ERR: - case SCU_TASK_DONE_EXCESS_DATA: - case SCU_TASK_DONE_UNEXP_FIS: - /* Also SCU_TASK_DONE_UNEXP_RESP: */ - case SCU_TASK_DONE_VIIT_ENTRY_NV: /* TODO - conditions? */ - case SCU_TASK_DONE_IIT_ENTRY_NV: /* TODO - conditions? */ - case SCU_TASK_DONE_RNCNV_OUTBOUND: /* TODO - conditions? */ - /* These are conditions in which the target - * has completed the task, so that no cleanup - * is necessary. - */ - *response_ptr = SAS_TASK_COMPLETE; + case SCU_TASK_CONTEXT_PROTOCOL_NONE: + /* / @todo When do we set no protocol type? */ + break; - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) - *status_ptr = SAS_DEVICE_UNKNOWN; - else - *status_ptr = SAS_ABORTED_TASK; + default: + /* This should never happen since we build the IO requests */ + break; + } - request->complete_in_target = true; + /* + * Check to see if we need to copy the task context buffer + * or have been building into the task context buffer */ + if (request->was_tag_assigned_by_user == false) { + scic_sds_controller_copy_task_context( + request->owning_controller, request); + } - *complete_to_host_ptr = isci_perform_normal_io_completion; - break; + /* Add to the post_context the io tag value */ + request->post_context |= scic_sds_io_tag_get_index(request->io_tag); + /* Everything is good go ahead and change state */ + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_STARTED); - /* Note that the only open reject completion codes seen here will be - * abandon-class codes; all others are automatically retried in the SCU. - */ - case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: + return SCI_SUCCESS; + } - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_WRONG_DEST); - break; + return SCI_FAILURE_INSUFFICIENT_RESOURCES; +} - case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: +/* + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_terminate() request. Since the request + * has not yet been posted to the hardware the request transitions to the + * completed state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_constructed_state_abort_handler( + struct scic_sds_request *request) +{ + /* + * This request has been terminated by the user make sure that the correct + * status code is returned */ + scic_sds_request_set_status(request, + SCU_TASK_DONE_TASK_ABORT, + SCI_FAILURE_IO_TERMINATED); + + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + return SCI_SUCCESS; +} - /* Note - the return of AB0 will change when - * libsas implements detection of zone violations. - */ - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_RESV_AB0); - break; +/* + * ***************************************************************************** + * * STARTED STATE HANDLERS + * ***************************************************************************** */ - case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: +/* + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_terminate() request. Since the request + * has been posted to the hardware the io request state is changed to the + * aborting state. enum sci_status SCI_SUCCESS + */ +enum sci_status scic_sds_request_started_state_abort_handler( + struct scic_sds_request *request) +{ + if (request->has_started_substate_machine) + sci_base_state_machine_stop(&request->started_substate_machine); - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_RESV_AB1); - break; + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_ABORTING); + return SCI_SUCCESS; +} - case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: +/* + * scic_sds_request_started_state_tc_completion_handler() - This method process + * TC (task context) completions for normal IO request (i.e. Task/Abort + * Completions of type 0). This method will update the + * SCIC_SDS_IO_REQUEST_T::status field. + * @sci_req: This parameter specifies the request for which a completion + * occurred. + * @completion_code: This parameter specifies the completion code received from + * the SCU. + * + */ +static enum sci_status +scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sci_req, + u32 completion_code) +{ + u8 datapres; + struct ssp_response_iu *resp_iu; - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_RESV_AB2); + /* + * TODO: Any SDMA return code of other than 0 is bad + * decode 0x003C0000 to determine SDMA status + */ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS); break; - case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): + { + /* + * There are times when the SCU hardware will return an early + * response because the io request specified more data than is + * returned by the target device (mode pages, inquiry data, + * etc.). We must check the response stats to see if this is + * truly a failed request or a good request that just got + * completed early. + */ + struct ssp_response_iu *resp = &sci_req->ssp.rsp; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_swab32_cpy(&sci_req->ssp.rsp, + &sci_req->ssp.rsp, + word_cnt); + + if (resp->status == 0) { + scic_sds_request_set_status( + sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS_IO_DONE_EARLY); + } else { + scic_sds_request_set_status( + sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + } + } + break; - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_RESV_AB3); - break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): + { + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: + sci_swab32_cpy(&sci_req->ssp.rsp, + &sci_req->ssp.rsp, + word_cnt); - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_BAD_DEST); + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); break; + } - case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: - - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_STP_NORES); + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): + /* + * / @todo With TASK_DONE_RESP_LEN_ERR is the response frame + * guaranteed to be received before this completion status is + * posted? + */ + resp_iu = &sci_req->ssp.rsp; + datapres = resp_iu->datapres; + + if ((datapres == 0x01) || (datapres == 0x02)) { + scic_sds_request_set_status( + sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + } else + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; - case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: - - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_EPROTO); + /* only stp device gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): + if (sci_req->protocol == SCIC_STP_PROTOCOL) { + scic_sds_request_set_status( + sci_req, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); + } else { + scic_sds_request_set_status( + sci_req, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + } break; - case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: - - isci_request_set_open_reject_status( - request, task, response_ptr, status_ptr, - complete_to_host_ptr, SAS_OREJ_CONN_RATE); + /* both stp/ssp device gets suspended */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): + scic_sds_request_set_status( + sci_req, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); break; - case SCU_TASK_DONE_LL_R_ERR: - /* Also SCU_TASK_DONE_ACK_NAK_TO: */ - case SCU_TASK_DONE_LL_PERR: - case SCU_TASK_DONE_LL_SY_TERM: - /* Also SCU_TASK_DONE_NAK_ERR:*/ - case SCU_TASK_DONE_LL_LF_TERM: - /* Also SCU_TASK_DONE_DATA_LEN_ERR: */ - case SCU_TASK_DONE_LL_ABORT_ERR: - case SCU_TASK_DONE_SEQ_INV_TYPE: - /* Also SCU_TASK_DONE_UNEXP_XR: */ - case SCU_TASK_DONE_XR_IU_LEN_ERR: - case SCU_TASK_DONE_INV_FIS_LEN: - /* Also SCU_TASK_DONE_XR_WD_LEN: */ - case SCU_TASK_DONE_SDMA_ERR: - case SCU_TASK_DONE_OFFSET_ERR: - case SCU_TASK_DONE_MAX_PLD_ERR: - case SCU_TASK_DONE_LF_ERR: - case SCU_TASK_DONE_SMP_RESP_TO_ERR: /* Escalate to dev reset? */ - case SCU_TASK_DONE_SMP_LL_RX_ERR: - case SCU_TASK_DONE_UNEXP_DATA: - case SCU_TASK_DONE_UNEXP_SDBFIS: - case SCU_TASK_DONE_REG_ERR: - case SCU_TASK_DONE_SDB_ERR: - case SCU_TASK_DONE_TASK_ABORT: + /* neither ssp nor stp gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): default: - /* Task in the target is not done. */ - *response_ptr = SAS_TASK_UNDELIVERED; - *status_ptr = SAM_STAT_TASK_ABORTED; - request->complete_in_target = false; - - *complete_to_host_ptr = isci_perform_error_io_completion; + scic_sds_request_set_status( + sci_req, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); break; } + + /* + * TODO: This is probably wrong for ACK/NAK timeout conditions + */ + + /* In all cases we will treat this as the completion of the IO req. */ + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + return SCI_SUCCESS; } -/** - * isci_task_save_for_upper_layer_completion() - This function saves the - * request for later completion to the upper layer driver. - * @host: This parameter is a pointer to the host on which the the request - * should be queued (either as an error or success). - * @request: This parameter is the completed request. - * @response: This parameter is the response code for the completed task. - * @status: This parameter is the status code for the completed task. - * - * none. - */ -static void isci_task_save_for_upper_layer_completion( - struct isci_host *host, - struct isci_request *request, - enum service_response response, - enum exec_status status, - enum isci_completion_selection task_notification_selection) +enum sci_status +scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code) { - struct sas_task *task = isci_request_access_task(request); - - task_notification_selection - = isci_task_set_completion_status(task, response, status, - task_notification_selection); + if (request->state_machine.current_state_id == SCI_BASE_REQUEST_STATE_STARTED && + request->has_started_substate_machine == false) + return scic_sds_request_started_state_tc_completion_handler(request, completion_code); + else if (request->state_handlers->tc_completion_handler) + return request->state_handlers->tc_completion_handler(request, completion_code); + + dev_warn(scic_to_dev(request->owning_controller), + "%s: SCIC IO Request given task completion notification %x " + "while in wrong state %d\n", + __func__, + completion_code, + sci_base_state_machine_get_state(&request->state_machine)); - /* Tasks aborted specifically by a call to the lldd_abort_task - * function should not be completed to the host in the regular path. - */ - switch (task_notification_selection) { + return SCI_FAILURE_INVALID_STATE; - case isci_perform_normal_io_completion: +} - /* Normal notification (task_done) */ - dev_dbg(&host->pdev->dev, - "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n", +/* + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_frame_handler() request. This method + * first determines the frame type received. If this is a response frame then + * the response data is copied to the io request response buffer for processing + * at completion time. If the frame type is not a response buffer an error is + * logged. enum sci_status SCI_SUCCESS SCI_FAILURE_INVALID_PARAMETER_VALUE + */ +static enum sci_status +scic_sds_request_started_state_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + u32 *frame_header; + struct ssp_frame_hdr ssp_hdr; + ssize_t word_cnt; + + status = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_request_get_controller(sci_req)->uf_control), + frame_index, + (void **)&frame_header); + + word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32); + sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt); + + if (ssp_hdr.frame_type == SSP_RESPONSE) { + struct ssp_response_iu *resp_iu; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + status = scic_sds_unsolicited_frame_control_get_buffer( + &(scic_sds_request_get_controller(sci_req)->uf_control), + frame_index, + (void **)&resp_iu); + + sci_swab32_cpy(&sci_req->ssp.rsp, + resp_iu, word_cnt); + + resp_iu = &sci_req->ssp.rsp; + + if ((resp_iu->datapres == 0x01) || + (resp_iu->datapres == 0x02)) { + scic_sds_request_set_status( + sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + } else + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); + } else { + /* This was not a response frame why did it get forwarded? */ + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: SCIC IO Request 0x%p received unexpected " + "frame %d type 0x%02x\n", __func__, - task, - task->task_status.resp, response, - task->task_status.stat, status); - /* Add to the completed list. */ - list_add(&request->completed_node, - &host->requests_to_complete); + sci_req, + frame_index, + ssp_hdr.frame_type); + } - /* Take the request off the device's pending request list. */ - list_del_init(&request->dev_node); - break; + /* + * In any case we are done with this frame buffer return it to the + * controller + */ + scic_sds_controller_release_frame( + sci_req->owning_controller, frame_index); - case isci_perform_aborted_io_completion: - /* No notification to libsas because this request is - * already in the abort path. - */ - dev_warn(&host->pdev->dev, - "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n", - __func__, - task, - task->task_status.resp, response, - task->task_status.stat, status); + return SCI_SUCCESS; +} - /* Wake up whatever process was waiting for this - * request to complete. - */ - WARN_ON(request->io_request_completion == NULL); +/* + * ***************************************************************************** + * * COMPLETED STATE HANDLERS + * ***************************************************************************** */ - if (request->io_request_completion != NULL) { - /* Signal whoever is waiting that this - * request is complete. - */ - complete(request->io_request_completion); - } - break; +/* + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_complete() request. This method frees up + * any io request resources that have been allocated and transitions the + * request to its final state. Consider stopping the state machine instead of + * transitioning to the final state? enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_completed_state_complete_handler( + struct scic_sds_request *request) +{ + if (request->was_tag_assigned_by_user != true) { + scic_controller_free_io_tag( + request->owning_controller, request->io_tag); + } - case isci_perform_error_io_completion: - /* Use sas_task_abort */ - dev_warn(&host->pdev->dev, - "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n", - __func__, - task, - task->task_status.resp, response, - task->task_status.stat, status); - /* Add to the aborted list. */ - list_add(&request->completed_node, - &host->requests_to_errorback); - break; + if (request->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) { + scic_sds_controller_release_frame( + request->owning_controller, request->saved_rx_frame_index); + } - default: - dev_warn(&host->pdev->dev, - "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n", - __func__, - task, - task->task_status.resp, response, - task->task_status.stat, status); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_FINAL); + return SCI_SUCCESS; +} - /* Add to the error to libsas list. */ - list_add(&request->completed_node, - &host->requests_to_errorback); +/* + * ***************************************************************************** + * * ABORTING STATE HANDLERS + * ***************************************************************************** */ + +/* + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_terminate() request. This method is the + * io request aborting state abort handlers. On receipt of a multiple + * terminate requests the io request will transition to the completed state. + * This should not happen in normal operation. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_aborting_state_abort_handler( + struct scic_sds_request *request) +{ + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + return SCI_SUCCESS; +} + +/* + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_task_completion() request. This method + * decodes the completion type waiting for the abort task complete + * notification. When the abort task complete is received the io request + * transitions to the completed state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): + case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED + ); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + + default: + /* + * Unless we get some strange error wait for the task abort to complete + * TODO: Should there be a state change for this completion? */ break; } + + return SCI_SUCCESS; +} + +/* + * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T + * object receives a scic_sds_request_frame_handler() request. This method + * discards the unsolicited frame since we are waiting for the abort task + * completion. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_request_aborting_state_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) +{ + /* TODO: Is it even possible to get an unsolicited frame in the aborting state? */ + + scic_sds_controller_release_frame( + sci_req->owning_controller, frame_index); + + return SCI_SUCCESS; } +static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { + [SCI_BASE_REQUEST_STATE_INITIAL] = { + }, + [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { + .start_handler = scic_sds_request_constructed_state_start_handler, + .abort_handler = scic_sds_request_constructed_state_abort_handler, + }, + [SCI_BASE_REQUEST_STATE_STARTED] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, + .frame_handler = scic_sds_request_started_state_frame_handler, + }, + [SCI_BASE_REQUEST_STATE_COMPLETED] = { + .complete_handler = scic_sds_request_completed_state_complete_handler, + }, + [SCI_BASE_REQUEST_STATE_ABORTING] = { + .abort_handler = scic_sds_request_aborting_state_abort_handler, + .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, + .frame_handler = scic_sds_request_aborting_state_frame_handler, + }, + [SCI_BASE_REQUEST_STATE_FINAL] = { + }, +}; + + /** - * isci_request_io_request_complete() - This function is called by the sci core - * when an io request completes. - * @isci_host: This parameter specifies the ISCI host object - * @request: This parameter is the completed isci_request object. - * @completion_status: This parameter specifies the completion status from the - * sci core. + * isci_request_process_response_iu() - This function sets the status and + * response iu, in the task struct, from the request object for the upper + * layer driver. + * @sas_task: This parameter is the task struct from the upper layer driver. + * @resp_iu: This parameter points to the response iu of the completed request. + * @dev: This parameter specifies the linux device struct. * * none. */ -void isci_request_io_request_complete( - struct isci_host *isci_host, - struct isci_request *request, - enum sci_io_status completion_status) +static void isci_request_process_response_iu( + struct sas_task *task, + struct ssp_response_iu *resp_iu, + struct device *dev) { - struct sas_task *task = isci_request_access_task(request); - struct ssp_response_iu *resp_iu; - void *resp_buf; - unsigned long task_flags; - struct isci_remote_device *isci_device = request->isci_device; - enum service_response response = SAS_TASK_UNDELIVERED; - enum exec_status status = SAS_ABORTED_TASK; - enum isci_request_status request_status; - enum isci_completion_selection complete_to_host - = isci_perform_normal_io_completion; - - dev_dbg(&isci_host->pdev->dev, - "%s: request = %p, task = %p,\n" - "task->data_dir = %d completion_status = 0x%x\n", + dev_dbg(dev, + "%s: resp_iu = %p " + "resp_iu->status = 0x%x,\nresp_iu->datapres = %d " + "resp_iu->response_data_len = %x, " + "resp_iu->sense_data_len = %x\nrepsonse data: ", __func__, - request, - task, - task->data_dir, - completion_status); + resp_iu, + resp_iu->status, + resp_iu->datapres, + resp_iu->response_data_len, + resp_iu->sense_data_len); - spin_lock(&request->state_lock); - request_status = isci_request_get_state(request); + task->task_status.stat = resp_iu->status; - /* Decode the request status. Note that if the request has been - * aborted by a task management function, we don't care - * what the status is. - */ - switch (request_status) { + /* libsas updates the task status fields based on the response iu. */ + sas_ssp_task_response(dev, task, resp_iu); +} - case aborted: - /* "aborted" indicates that the request was aborted by a task - * management function, since once a task management request is - * perfomed by the device, the request only completes because - * of the subsequent driver terminate. - * - * Aborted also means an external thread is explicitly managing - * this request, so that we do not complete it up the stack. - * - * The target is still there (since the TMF was successful). - */ - request->complete_in_target = true; - response = SAS_TASK_COMPLETE; +/** + * isci_request_set_open_reject_status() - This function prepares the I/O + * completion for OPEN_REJECT conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @complete_to_host_ptr: This parameter specifies the action to be taken by + * the LLDD with respect to completing this request or forcing an abort + * condition on the I/O. + * @open_rej_reason: This parameter specifies the encoded reason for the + * abandon-class reject. + * + * none. + */ +static void isci_request_set_open_reject_status( + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum isci_completion_selection *complete_to_host_ptr, + enum sas_open_rej_reason open_rej_reason) +{ + /* Task in the target is done. */ + request->complete_in_target = true; + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAS_OPEN_REJECT; + *complete_to_host_ptr = isci_perform_normal_io_completion; + task->task_status.open_rej_reason = open_rej_reason; +} - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if ((isci_device->status == isci_stopping) - || (isci_device->status == isci_stopped) - ) - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_ABORTED_TASK; +/** + * isci_request_handle_controller_specific_errors() - This function decodes + * controller-specific I/O completion error conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @complete_to_host_ptr: This parameter specifies the action to be taken by + * the LLDD with respect to completing this request or forcing an abort + * condition on the I/O. + * + * none. + */ +static void isci_request_handle_controller_specific_errors( + struct isci_remote_device *isci_device, + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum isci_completion_selection *complete_to_host_ptr) +{ + unsigned int cstatus; - complete_to_host = isci_perform_aborted_io_completion; - /* This was an aborted request. */ + cstatus = request->sci.scu_status; - spin_unlock(&request->state_lock); - break; + dev_dbg(&request->isci_host->pdev->dev, + "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR " + "- controller status = 0x%x\n", + __func__, request, cstatus); - case aborting: - /* aborting means that the task management function tried and - * failed to abort the request. We need to note the request - * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the - * target as down. - * - * Aborting also means an external thread is explicitly managing - * this request, so that we do not complete it up the stack. - */ - request->complete_in_target = true; - response = SAS_TASK_UNDELIVERED; + /* Decode the controller-specific errors; most + * important is to recognize those conditions in which + * the target may still have a task outstanding that + * must be aborted. + * + * Note that there are SCU completion codes being + * named in the decode below for which SCIC has already + * done work to handle them in a way other than as + * a controller-specific completion code; these are left + * in the decode below for completeness sake. + */ + switch (cstatus) { + case SCU_TASK_DONE_DMASETUP_DIRERR: + /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */ + case SCU_TASK_DONE_XFERCNT_ERR: + /* Also SCU_TASK_DONE_SMP_UFI_ERR: */ + if (task->task_proto == SAS_PROTOCOL_SMP) { + /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */ + *response_ptr = SAS_TASK_COMPLETE; - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) - /* The device has been /is being stopped. Note that - * we ignore the quiesce state, since we are + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are * concerned about the actual device state. */ - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_PHY_DOWN; + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; - complete_to_host = isci_perform_aborted_io_completion; + request->complete_in_target = true; - /* This was an aborted request. */ + *complete_to_host_ptr = + isci_perform_normal_io_completion; + } else { + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; - spin_unlock(&request->state_lock); - break; + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAM_STAT_TASK_ABORTED; - case terminating: + request->complete_in_target = false; - /* This was an terminated request. This happens when - * the I/O is being terminated because of an action on - * the device (reset, tear down, etc.), and the I/O needs - * to be completed up the stack. + *complete_to_host_ptr = + isci_perform_error_io_completion; + } + + break; + + case SCU_TASK_DONE_CRC_ERR: + case SCU_TASK_DONE_NAK_CMD_ERR: + case SCU_TASK_DONE_EXCESS_DATA: + case SCU_TASK_DONE_UNEXP_FIS: + /* Also SCU_TASK_DONE_UNEXP_RESP: */ + case SCU_TASK_DONE_VIIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_IIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_RNCNV_OUTBOUND: /* TODO - conditions? */ + /* These are conditions in which the target + * has completed the task, so that no cleanup + * is necessary. */ - request->complete_in_target = true; - response = SAS_TASK_UNDELIVERED; + *response_ptr = SAS_TASK_COMPLETE; /* See if the device has been/is being stopped. Note * that we ignore the quiesce state, since we are @@ -953,208 +1341,1206 @@ void isci_request_io_request_complete( */ if ((isci_device->status == isci_stopping) || (isci_device->status == isci_stopped)) - status = SAS_DEVICE_UNKNOWN; + *status_ptr = SAS_DEVICE_UNKNOWN; else - status = SAS_ABORTED_TASK; - - complete_to_host = isci_perform_aborted_io_completion; + *status_ptr = SAS_ABORTED_TASK; - /* This was a terminated request. */ + request->complete_in_target = true; - spin_unlock(&request->state_lock); + *complete_to_host_ptr = isci_perform_normal_io_completion; break; - default: - /* The request is done from an SCU HW perspective. */ - request->status = completed; + /* Note that the only open reject completion codes seen here will be + * abandon-class codes; all others are automatically retried in the SCU. + */ + case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: - spin_unlock(&request->state_lock); + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_WRONG_DEST); + break; - /* This is an active request being completed from the core. */ - switch (completion_status) { + case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: - case SCI_IO_FAILURE_RESPONSE_VALID: - dev_dbg(&isci_host->pdev->dev, - "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", - __func__, - request, - task); + /* Note - the return of AB0 will change when + * libsas implements detection of zone violations. + */ + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB0); + break; - if (sas_protocol_ata(task->task_proto)) { - resp_buf = &request->sci.stp.rsp; - isci_request_process_stp_response(task, - resp_buf); - } else if (SAS_PROTOCOL_SSP == task->task_proto) { + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: - /* crack the iu response buffer. */ - resp_iu = &request->sci.ssp.rsp; - isci_request_process_response_iu(task, resp_iu, - &isci_host->pdev->dev); + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB1); + break; - } else if (SAS_PROTOCOL_SMP == task->task_proto) { + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: - dev_err(&isci_host->pdev->dev, - "%s: SCI_IO_FAILURE_RESPONSE_VALID: " - "SAS_PROTOCOL_SMP protocol\n", - __func__); + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB2); + break; - } else - dev_err(&isci_host->pdev->dev, - "%s: unknown protocol\n", __func__); + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: - /* use the task status set in the task struct by the - * isci_request_process_response_iu call. - */ - request->complete_in_target = true; - response = task->task_status.resp; - status = task->task_status.stat; - break; + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB3); + break; - case SCI_IO_SUCCESS: - case SCI_IO_SUCCESS_IO_DONE_EARLY: + case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: - response = SAS_TASK_COMPLETE; - status = SAM_STAT_GOOD; - request->complete_in_target = true; + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_BAD_DEST); + break; - if (task->task_proto == SAS_PROTOCOL_SMP) { - void *rsp = &request->sci.smp.rsp; + case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: - dev_dbg(&isci_host->pdev->dev, - "%s: SMP protocol completion\n", - __func__); + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_STP_NORES); + break; - sg_copy_from_buffer( - &task->smp_task.smp_resp, 1, - rsp, sizeof(struct smp_resp)); - } else if (completion_status - == SCI_IO_SUCCESS_IO_DONE_EARLY) { + case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: - /* This was an SSP / STP / SATA transfer. - * There is a possibility that less data than - * the maximum was transferred. - */ - u32 transferred_length - = scic_io_request_get_number_of_bytes_transferred(&request->sci); + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_EPROTO); + break; - task->task_status.residual - = task->total_xfer_len - transferred_length; + case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: - /* If there were residual bytes, call this an - * underrun. - */ - if (task->task_status.residual != 0) - status = SAS_DATA_UNDERRUN; + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_CONN_RATE); + break; - dev_dbg(&isci_host->pdev->dev, - "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", - __func__, - status); + case SCU_TASK_DONE_LL_R_ERR: + /* Also SCU_TASK_DONE_ACK_NAK_TO: */ + case SCU_TASK_DONE_LL_PERR: + case SCU_TASK_DONE_LL_SY_TERM: + /* Also SCU_TASK_DONE_NAK_ERR:*/ + case SCU_TASK_DONE_LL_LF_TERM: + /* Also SCU_TASK_DONE_DATA_LEN_ERR: */ + case SCU_TASK_DONE_LL_ABORT_ERR: + case SCU_TASK_DONE_SEQ_INV_TYPE: + /* Also SCU_TASK_DONE_UNEXP_XR: */ + case SCU_TASK_DONE_XR_IU_LEN_ERR: + case SCU_TASK_DONE_INV_FIS_LEN: + /* Also SCU_TASK_DONE_XR_WD_LEN: */ + case SCU_TASK_DONE_SDMA_ERR: + case SCU_TASK_DONE_OFFSET_ERR: + case SCU_TASK_DONE_MAX_PLD_ERR: + case SCU_TASK_DONE_LF_ERR: + case SCU_TASK_DONE_SMP_RESP_TO_ERR: /* Escalate to dev reset? */ + case SCU_TASK_DONE_SMP_LL_RX_ERR: + case SCU_TASK_DONE_UNEXP_DATA: + case SCU_TASK_DONE_UNEXP_SDBFIS: + case SCU_TASK_DONE_REG_ERR: + case SCU_TASK_DONE_SDB_ERR: + case SCU_TASK_DONE_TASK_ABORT: + default: + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAM_STAT_TASK_ABORTED; + request->complete_in_target = false; - } else - dev_dbg(&isci_host->pdev->dev, - "%s: SCI_IO_SUCCESS\n", - __func__); + *complete_to_host_ptr = isci_perform_error_io_completion; + break; + } +} - break; +/** + * isci_task_save_for_upper_layer_completion() - This function saves the + * request for later completion to the upper layer driver. + * @host: This parameter is a pointer to the host on which the the request + * should be queued (either as an error or success). + * @request: This parameter is the completed request. + * @response: This parameter is the response code for the completed task. + * @status: This parameter is the status code for the completed task. + * + * none. + */ +static void isci_task_save_for_upper_layer_completion( + struct isci_host *host, + struct isci_request *request, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + struct sas_task *task = isci_request_access_task(request); - case SCI_IO_FAILURE_TERMINATED: - dev_dbg(&isci_host->pdev->dev, - "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", - __func__, - request, - task); + task_notification_selection + = isci_task_set_completion_status(task, response, status, + task_notification_selection); - /* The request was terminated explicitly. No handling - * is needed in the SCSI error handler path. - */ - request->complete_in_target = true; - response = SAS_TASK_UNDELIVERED; + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (task_notification_selection) { - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_ABORTED_TASK; + case isci_perform_normal_io_completion: - complete_to_host = isci_perform_normal_io_completion; - break; + /* Normal notification (task_done) */ + dev_dbg(&host->pdev->dev, + "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + /* Add to the completed list. */ + list_add(&request->completed_node, + &host->requests_to_complete); - case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: + /* Take the request off the device's pending request list. */ + list_del_init(&request->dev_node); + break; - isci_request_handle_controller_specific_errors( - isci_device, request, task, &response, &status, - &complete_to_host); + case isci_perform_aborted_io_completion: + /* No notification to libsas because this request is + * already in the abort path. + */ + dev_warn(&host->pdev->dev, + "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); - break; + /* Wake up whatever process was waiting for this + * request to complete. + */ + WARN_ON(request->io_request_completion == NULL); - case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: - /* This is a special case, in that the I/O completion - * is telling us that the device needs a reset. - * In order for the device reset condition to be - * noticed, the I/O has to be handled in the error - * handler. Set the reset flag and cause the - * SCSI error thread to be scheduled. - */ - spin_lock_irqsave(&task->task_state_lock, task_flags); - task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + if (request->io_request_completion != NULL) { + + /* Signal whoever is waiting that this + * request is complete. + */ + complete(request->io_request_completion); + } + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_warn(&host->pdev->dev, + "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + /* Add to the aborted list. */ + list_add(&request->completed_node, + &host->requests_to_errorback); + break; + + default: + dev_warn(&host->pdev->dev, + "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + + /* Add to the error to libsas list. */ + list_add(&request->completed_node, + &host->requests_to_errorback); + break; + } +} + +static void isci_request_io_request_complete(struct isci_host *isci_host, + struct isci_request *request, + enum sci_io_status completion_status) +{ + struct sas_task *task = isci_request_access_task(request); + struct ssp_response_iu *resp_iu; + void *resp_buf; + unsigned long task_flags; + struct isci_remote_device *isci_device = request->isci_device; + enum service_response response = SAS_TASK_UNDELIVERED; + enum exec_status status = SAS_ABORTED_TASK; + enum isci_request_status request_status; + enum isci_completion_selection complete_to_host + = isci_perform_normal_io_completion; + + dev_dbg(&isci_host->pdev->dev, + "%s: request = %p, task = %p,\n" + "task->data_dir = %d completion_status = 0x%x\n", + __func__, + request, + task, + task->data_dir, + completion_status); + + spin_lock(&request->state_lock); + request_status = isci_request_get_state(request); + + /* Decode the request status. Note that if the request has been + * aborted by a task management function, we don't care + * what the status is. + */ + switch (request_status) { + + case aborted: + /* "aborted" indicates that the request was aborted by a task + * management function, since once a task management request is + * perfomed by the device, the request only completes because + * of the subsequent driver terminate. + * + * Aborted also means an external thread is explicitly managing + * this request, so that we do not complete it up the stack. + * + * The target is still there (since the TMF was successful). + */ + request->complete_in_target = true; + response = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) + || (isci_device->status == isci_stopped) + ) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_aborted_io_completion; + /* This was an aborted request. */ + + spin_unlock(&request->state_lock); + break; + + case aborting: + /* aborting means that the task management function tried and + * failed to abort the request. We need to note the request + * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the + * target as down. + * + * Aborting also means an external thread is explicitly managing + * this request, so that we do not complete it up the stack. + */ + request->complete_in_target = true; + response = SAS_TASK_UNDELIVERED; + + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + /* The device has been /is being stopped. Note that + * we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_PHY_DOWN; + + complete_to_host = isci_perform_aborted_io_completion; + + /* This was an aborted request. */ + + spin_unlock(&request->state_lock); + break; + + case terminating: + + /* This was an terminated request. This happens when + * the I/O is being terminated because of an action on + * the device (reset, tear down, etc.), and the I/O needs + * to be completed up the stack. + */ + request->complete_in_target = true; + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_aborted_io_completion; + + /* This was a terminated request. */ + + spin_unlock(&request->state_lock); + break; + + default: + + /* The request is done from an SCU HW perspective. */ + request->status = completed; + + spin_unlock(&request->state_lock); + + /* This is an active request being completed from the core. */ + switch (completion_status) { + + case SCI_IO_FAILURE_RESPONSE_VALID: + dev_dbg(&isci_host->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", + __func__, + request, + task); + + if (sas_protocol_ata(task->task_proto)) { + resp_buf = &request->sci.stp.rsp; + isci_request_process_stp_response(task, + resp_buf); + } else if (SAS_PROTOCOL_SSP == task->task_proto) { + + /* crack the iu response buffer. */ + resp_iu = &request->sci.ssp.rsp; + isci_request_process_response_iu(task, resp_iu, + &isci_host->pdev->dev); + + } else if (SAS_PROTOCOL_SMP == task->task_proto) { + + dev_err(&isci_host->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID: " + "SAS_PROTOCOL_SMP protocol\n", + __func__); + + } else + dev_err(&isci_host->pdev->dev, + "%s: unknown protocol\n", __func__); + + /* use the task status set in the task struct by the + * isci_request_process_response_iu call. + */ + request->complete_in_target = true; + response = task->task_status.resp; + status = task->task_status.stat; + break; + + case SCI_IO_SUCCESS: + case SCI_IO_SUCCESS_IO_DONE_EARLY: + + response = SAS_TASK_COMPLETE; + status = SAM_STAT_GOOD; + request->complete_in_target = true; + + if (task->task_proto == SAS_PROTOCOL_SMP) { + void *rsp = &request->sci.smp.rsp; + + dev_dbg(&isci_host->pdev->dev, + "%s: SMP protocol completion\n", + __func__); + + sg_copy_from_buffer( + &task->smp_task.smp_resp, 1, + rsp, sizeof(struct smp_resp)); + } else if (completion_status + == SCI_IO_SUCCESS_IO_DONE_EARLY) { + + /* This was an SSP / STP / SATA transfer. + * There is a possibility that less data than + * the maximum was transferred. + */ + u32 transferred_length = sci_req_tx_bytes(&request->sci); + + task->task_status.residual + = task->total_xfer_len - transferred_length; + + /* If there were residual bytes, call this an + * underrun. + */ + if (task->task_status.residual != 0) + status = SAS_DATA_UNDERRUN; + + dev_dbg(&isci_host->pdev->dev, + "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", + __func__, + status); + + } else + dev_dbg(&isci_host->pdev->dev, + "%s: SCI_IO_SUCCESS\n", + __func__); + + break; + + case SCI_IO_FAILURE_TERMINATED: + dev_dbg(&isci_host->pdev->dev, + "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", + __func__, + request, + task); + + /* The request was terminated explicitly. No handling + * is needed in the SCSI error handler path. + */ + request->complete_in_target = true; + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_normal_io_completion; + break; + + case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: + + isci_request_handle_controller_specific_errors( + isci_device, request, task, &response, &status, + &complete_to_host); + + break; + + case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: + /* This is a special case, in that the I/O completion + * is telling us that the device needs a reset. + * In order for the device reset condition to be + * noticed, the I/O has to be handled in the error + * handler. Set the reset flag and cause the + * SCSI error thread to be scheduled. + */ + spin_lock_irqsave(&task->task_state_lock, task_flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; spin_unlock_irqrestore(&task->task_state_lock, task_flags); - /* Fail the I/O. */ - response = SAS_TASK_UNDELIVERED; - status = SAM_STAT_TASK_ABORTED; + /* Fail the I/O. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; + + complete_to_host = isci_perform_error_io_completion; + request->complete_in_target = false; + break; + + default: + /* Catch any otherwise unhandled error codes here. */ + dev_warn(&isci_host->pdev->dev, + "%s: invalid completion code: 0x%x - " + "isci_request = %p\n", + __func__, completion_status, request); + + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_error_io_completion; + request->complete_in_target = false; + break; + } + break; + } + + isci_request_unmap_sgl(request, isci_host->pdev); + + /* Put the completed request on the correct list */ + isci_task_save_for_upper_layer_completion(isci_host, request, response, + status, complete_to_host + ); + + /* complete the io request to the core. */ + scic_controller_complete_io(&isci_host->sci, + &isci_device->sci, + &request->sci); + /* set terminated handle so it cannot be completed or + * terminated again, and to cause any calls into abort + * task to recognize the already completed case. + */ + request->terminated = true; + + isci_host_can_dequeue(isci_host, 1); +} + +/** + * scic_sds_request_initial_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occurring. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_INITIAL state. This state is entered when the initial + * base request is constructed. Entry into the initial state sets all handlers + * for the io request object to their default handlers. none + */ +static void scic_sds_request_initial_state_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_INITIAL + ); +} + +/** + * scic_sds_request_constructed_state_enter() - + * @object: The io request object that is to enter the constructed state. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_CONSTRUCTED state. The method sets the state handlers + * for the the constructed state. none + */ +static void scic_sds_request_constructed_state_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_CONSTRUCTED + ); +} + +/** + * scic_sds_request_started_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occurring. This is cast into a SCIC_SDS_IO_REQUEST object. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_STARTED state. If the io request object type is a + * SCSI Task request we must enter the started substate machine. none + */ +static void scic_sds_request_started_state_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_STARTED + ); + + /* + * Most of the request state machines have a started substate machine so + * start its execution on the entry to the started state. */ + if (sci_req->has_started_substate_machine == true) + sci_base_state_machine_start(&sci_req->started_substate_machine); +} + +/** + * scic_sds_request_started_state_exit() - + * @object: This parameter specifies the base object for which the state + * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST + * object. + * + * This method implements the actions taken when exiting the + * SCI_BASE_REQUEST_STATE_STARTED state. For task requests the action will be + * to stop the started substate machine. none + */ +static void scic_sds_request_started_state_exit(void *object) +{ + struct scic_sds_request *sci_req = object; + + if (sci_req->has_started_substate_machine == true) + sci_base_state_machine_stop(&sci_req->started_substate_machine); +} + +/** + * scic_sds_request_completed_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST + * object. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_COMPLETED state. This state is entered when the + * SCIC_SDS_IO_REQUEST has completed. The method will decode the request + * completion status and convert it to an enum sci_status to return in the + * completion callback function. none + */ +static void scic_sds_request_completed_state_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + struct scic_sds_controller *scic = + scic_sds_request_get_controller(sci_req); + struct isci_host *ihost = scic_to_ihost(scic); + struct isci_request *ireq = sci_req_to_ireq(sci_req); + + SET_STATE_HANDLER(sci_req, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Tell the SCI_USER that the IO request is complete */ + if (sci_req->is_task_management_request == false) + isci_request_io_request_complete(ihost, ireq, + sci_req->sci_status); + else + isci_task_request_complete(ihost, ireq, sci_req->sci_status); +} + +/** + * scic_sds_request_aborting_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST + * object. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_ABORTING state. none + */ +static void scic_sds_request_aborting_state_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + /* Setting the abort bit in the Task Context is required by the silicon. */ + sci_req->task_context_buffer->abort = 1; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_ABORTING + ); +} + +/** + * scic_sds_request_final_state_enter() - + * @object: This parameter specifies the base object for which the state + * transition is occurring. This is cast into a SCIC_SDS_IO_REQUEST object. + * + * This method implements the actions taken when entering the + * SCI_BASE_REQUEST_STATE_FINAL state. The only action required is to put the + * state handlers in place. none + */ +static void scic_sds_request_final_state_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCI_BASE_REQUEST_STATE_FINAL + ); +} + +static const struct sci_base_state scic_sds_request_state_table[] = { + [SCI_BASE_REQUEST_STATE_INITIAL] = { + .enter_state = scic_sds_request_initial_state_enter, + }, + [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { + .enter_state = scic_sds_request_constructed_state_enter, + }, + [SCI_BASE_REQUEST_STATE_STARTED] = { + .enter_state = scic_sds_request_started_state_enter, + .exit_state = scic_sds_request_started_state_exit + }, + [SCI_BASE_REQUEST_STATE_COMPLETED] = { + .enter_state = scic_sds_request_completed_state_enter, + }, + [SCI_BASE_REQUEST_STATE_ABORTING] = { + .enter_state = scic_sds_request_aborting_state_enter, + }, + [SCI_BASE_REQUEST_STATE_FINAL] = { + .enter_state = scic_sds_request_final_state_enter, + }, +}; + +static void scic_sds_general_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, struct scic_sds_request *sci_req) +{ + sci_base_state_machine_construct(&sci_req->state_machine, sci_req, + scic_sds_request_state_table, SCI_BASE_REQUEST_STATE_INITIAL); + sci_base_state_machine_start(&sci_req->state_machine); + + sci_req->io_tag = io_tag; + sci_req->owning_controller = scic; + sci_req->target_device = sci_dev; + sci_req->has_started_substate_machine = false; + sci_req->protocol = SCIC_NO_PROTOCOL; + sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; + sci_req->device_sequence = scic_sds_remote_device_get_sequence(sci_dev); + + sci_req->sci_status = SCI_SUCCESS; + sci_req->scu_status = 0; + sci_req->post_context = 0xFFFFFFFF; + + sci_req->is_task_management_request = false; + + if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + sci_req->was_tag_assigned_by_user = false; + sci_req->task_context_buffer = NULL; + } else { + sci_req->was_tag_assigned_by_user = true; + + sci_req->task_context_buffer = + scic_sds_controller_get_task_context_buffer(scic, io_tag); + } +} + +static enum sci_status +scic_io_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, struct scic_sds_request *sci_req) +{ + struct domain_device *dev = sci_dev_to_domain(sci_dev); + enum sci_status status = SCI_SUCCESS; + + /* Build the common part of the request */ + scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); + + if (sci_dev->rnc.remote_node_index == + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + return SCI_FAILURE_INVALID_REMOTE_DEVICE; + + if (dev->dev_type == SAS_END_DEV) + scic_sds_ssp_io_request_assign_buffers(sci_req); + else if ((dev->dev_type == SATA_DEV) || + (dev->tproto & SAS_PROTOCOL_STP)) { + scic_sds_stp_request_assign_buffers(sci_req); + memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd)); + } else if (dev_is_expander(dev)) { + scic_sds_smp_request_assign_buffers(sci_req); + memset(&sci_req->smp.cmd, 0, sizeof(sci_req->smp.cmd)); + } else + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + if (status == SCI_SUCCESS) { + memset(sci_req->task_context_buffer, 0, + offsetof(struct scu_task_context, sgl_pair_ab)); + } + + return status; +} + +enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, struct scic_sds_request *sci_req) +{ + struct domain_device *dev = sci_dev_to_domain(sci_dev); + enum sci_status status = SCI_SUCCESS; + + /* Build the common part of the request */ + scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); + + if (dev->dev_type == SAS_END_DEV) { + scic_sds_ssp_task_request_assign_buffers(sci_req); + + sci_req->has_started_substate_machine = true; + + /* Construct the started sub-state machine. */ + sci_base_state_machine_construct( + &sci_req->started_substate_machine, + sci_req, + scic_sds_io_request_started_task_mgmt_substate_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION + ); + } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) + scic_sds_stp_request_assign_buffers(sci_req); + else + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + if (status == SCI_SUCCESS) { + sci_req->is_task_management_request = true; + memset(sci_req->task_context_buffer, 0, sizeof(struct scu_task_context)); + } + + return status; +} + +static enum sci_status isci_request_ssp_request_construct( + struct isci_request *request) +{ + enum sci_status status; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p\n", + __func__, + request); + status = scic_io_request_construct_basic_ssp(&request->sci); + return status; +} + +static enum sci_status isci_request_stp_request_construct( + struct isci_request *request) +{ + struct sas_task *task = isci_request_access_task(request); + enum sci_status status; + struct host_to_dev_fis *register_fis; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p\n", + __func__, + request); + + /* Get the host_to_dev_fis from the core and copy + * the fis from the task into it. + */ + register_fis = isci_sata_task_to_fis_copy(task); + + status = scic_io_request_construct_basic_sata(&request->sci); + + /* Set the ncq tag in the fis, from the queue + * command in the task. + */ + if (isci_sata_is_task_ncq(task)) { + + isci_sata_set_ncq_tag( + register_fis, + task + ); + } + + return status; +} + +/* + * isci_smp_request_build() - This function builds the smp request. + * @ireq: This parameter points to the isci_request allocated in the + * request construct function. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_smp_request_build(struct isci_request *ireq) +{ + enum sci_status status = SCI_FAILURE; + struct sas_task *task = isci_request_access_task(ireq); + struct scic_sds_request *sci_req = &ireq->sci; + + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: request = %p\n", __func__, ireq); + + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: smp_req len = %d\n", + __func__, + task->smp_task.smp_req.length); + + /* copy the smp_command to the address; */ + sg_copy_to_buffer(&task->smp_task.smp_req, 1, + &sci_req->smp.cmd, + sizeof(struct smp_req)); + + status = scic_io_request_construct_smp(sci_req); + if (status != SCI_SUCCESS) + dev_warn(&ireq->isci_host->pdev->dev, + "%s: failed with status = %d\n", + __func__, + status); + + return status; +} + +/** + * isci_io_request_build() - This function builds the io request object. + * @isci_host: This parameter specifies the ISCI host object + * @request: This parameter points to the isci_request object allocated in the + * request construct function. + * @sci_device: This parameter is the handle for the sci core's remote device + * object that is the destination for this request. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_io_request_build( + struct isci_host *isci_host, + struct isci_request *request, + struct isci_remote_device *isci_device) +{ + enum sci_status status = SCI_SUCCESS; + struct sas_task *task = isci_request_access_task(request); + struct scic_sds_remote_device *sci_device = &isci_device->sci; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = 0x%p; request = %p, " + "num_scatter = %d\n", + __func__, + isci_device, + request, + task->num_scatter); + + /* map the sgl addresses, if present. + * libata does the mapping for sata devices + * before we get the request. + */ + if (task->num_scatter && + !sas_protocol_ata(task->task_proto) && + !(SAS_PROTOCOL_SMP & task->task_proto)) { + + request->num_sg_entries = dma_map_sg( + &isci_host->pdev->dev, + task->scatter, + task->num_scatter, + task->data_dir + ); + + if (request->num_sg_entries == 0) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + } + + /* build the common request object. For now, + * we will let the core allocate the IO tag. + */ + status = scic_io_request_construct(&isci_host->sci, sci_device, + SCI_CONTROLLER_INVALID_IO_TAG, + &request->sci); + + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: failed request construct\n", + __func__); + return SCI_FAILURE; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SMP: + status = isci_smp_request_build(request); + break; + case SAS_PROTOCOL_SSP: + status = isci_request_ssp_request_construct(request); + break; + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: + status = isci_request_stp_request_construct(request); + break; + default: + dev_warn(&isci_host->pdev->dev, + "%s: unknown protocol\n", __func__); + return SCI_FAILURE; + } + + return SCI_SUCCESS; +} + +/** + * isci_request_alloc_core() - This function gets the request object from the + * isci_host dma cache. + * @isci_host: This parameter specifies the ISCI host object + * @isci_request: This parameter will contain the pointer to the new + * isci_request object. + * @isci_device: This parameter is the pointer to the isci remote device object + * that is the destination for this request. + * @gfp_flags: This parameter specifies the os allocation flags. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static int isci_request_alloc_core( + struct isci_host *isci_host, + struct isci_request **isci_request, + struct isci_remote_device *isci_device, + gfp_t gfp_flags) +{ + int ret = 0; + dma_addr_t handle; + struct isci_request *request; + - complete_to_host = isci_perform_error_io_completion; - request->complete_in_target = false; - break; + /* get pointer to dma memory. This actually points + * to both the isci_remote_device object and the + * sci object. The isci object is at the beginning + * of the memory allocated here. + */ + request = dma_pool_alloc(isci_host->dma_pool, gfp_flags, &handle); + if (!request) { + dev_warn(&isci_host->pdev->dev, + "%s: dma_pool_alloc returned NULL\n", __func__); + return -ENOMEM; + } - default: - /* Catch any otherwise unhandled error codes here. */ - dev_warn(&isci_host->pdev->dev, - "%s: invalid completion code: 0x%x - " - "isci_request = %p\n", - __func__, completion_status, request); + /* initialize the request object. */ + spin_lock_init(&request->state_lock); + request->request_daddr = handle; + request->isci_host = isci_host; + request->isci_device = isci_device; + request->io_request_completion = NULL; + request->terminated = false; - response = SAS_TASK_UNDELIVERED; + request->num_sg_entries = 0; - /* See if the device has been/is being stopped. Note - * that we ignore the quiesce state, since we are - * concerned about the actual device state. - */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) - status = SAS_DEVICE_UNKNOWN; - else - status = SAS_ABORTED_TASK; + request->complete_in_target = false; - complete_to_host = isci_perform_error_io_completion; - request->complete_in_target = false; - break; - } - break; + INIT_LIST_HEAD(&request->completed_node); + INIT_LIST_HEAD(&request->dev_node); + + *isci_request = request; + isci_request_change_state(request, allocated); + + return ret; +} + +static int isci_request_alloc_io( + struct isci_host *isci_host, + struct sas_task *task, + struct isci_request **isci_request, + struct isci_remote_device *isci_device, + gfp_t gfp_flags) +{ + int retval = isci_request_alloc_core(isci_host, isci_request, + isci_device, gfp_flags); + + if (!retval) { + (*isci_request)->ttype_ptr.io_task_ptr = task; + (*isci_request)->ttype = io_task; + + task->lldd_task = *isci_request; } + return retval; +} - isci_request_unmap_sgl(request, isci_host->pdev); +/** + * isci_request_alloc_tmf() - This function gets the request object from the + * isci_host dma cache and initializes the relevant fields as a sas_task. + * @isci_host: This parameter specifies the ISCI host object + * @sas_task: This parameter is the task struct from the upper layer driver. + * @isci_request: This parameter will contain the pointer to the new + * isci_request object. + * @isci_device: This parameter is the pointer to the isci remote device object + * that is the destination for this request. + * @gfp_flags: This parameter specifies the os allocation flags. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +int isci_request_alloc_tmf( + struct isci_host *isci_host, + struct isci_tmf *isci_tmf, + struct isci_request **isci_request, + struct isci_remote_device *isci_device, + gfp_t gfp_flags) +{ + int retval = isci_request_alloc_core(isci_host, isci_request, + isci_device, gfp_flags); - /* Put the completed request on the correct list */ - isci_task_save_for_upper_layer_completion(isci_host, request, response, - status, complete_to_host - ); + if (!retval) { - /* complete the io request to the core. */ - scic_controller_complete_io(&isci_host->sci, - &isci_device->sci, - &request->sci); - /* set terminated handle so it cannot be completed or - * terminated again, and to cause any calls into abort - * task to recognize the already completed case. + (*isci_request)->ttype_ptr.tmf_task_ptr = isci_tmf; + (*isci_request)->ttype = tmf_task; + } + return retval; +} + +/** + * isci_request_execute() - This function allocates the isci_request object, + * all fills in some common fields. + * @isci_host: This parameter specifies the ISCI host object + * @sas_task: This parameter is the task struct from the upper layer driver. + * @isci_request: This parameter will contain the pointer to the new + * isci_request object. + * @gfp_flags: This parameter specifies the os allocation flags. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +int isci_request_execute( + struct isci_host *isci_host, + struct sas_task *task, + struct isci_request **isci_request, + gfp_t gfp_flags) +{ + int ret = 0; + struct scic_sds_remote_device *sci_device; + enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + struct isci_remote_device *isci_device; + struct isci_request *request; + unsigned long flags; + + isci_device = task->dev->lldd_dev; + sci_device = &isci_device->sci; + + /* do common allocation and init of request object. */ + ret = isci_request_alloc_io( + isci_host, + task, + &request, + isci_device, + gfp_flags + ); + + if (ret) + goto out; + + status = isci_io_request_build(isci_host, request, isci_device); + if (status != SCI_SUCCESS) { + dev_warn(&isci_host->pdev->dev, + "%s: request_construct failed - status = 0x%x\n", + __func__, + status); + goto out; + } + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* send the request, let the core assign the IO TAG. */ + status = scic_controller_start_io(&isci_host->sci, sci_device, + &request->sci, + SCI_CONTROLLER_INVALID_IO_TAG); + if (status != SCI_SUCCESS && + status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + dev_warn(&isci_host->pdev->dev, + "%s: failed request start (0x%x)\n", + __func__, status); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + goto out; + } + + /* Either I/O started OK, or the core has signaled that + * the device needs a target reset. + * + * In either case, hold onto the I/O for later. + * + * Update it's status and add it to the list in the + * remote device object. */ - request->terminated = true; + isci_request_change_state(request, started); + list_add(&request->dev_node, &isci_device->reqs_in_process); - isci_host_can_dequeue(isci_host, 1); + if (status == SCI_SUCCESS) { + /* Save the tag for possible task mgmt later. */ + request->io_tag = request->sci.io_tag; + } else { + /* The request did not really start in the + * hardware, so clear the request handle + * here so no terminations will be done. + */ + request->terminated = true; + } + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + if (status == + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* Signal libsas that we need the SCSI error + * handler thread to work on this I/O and that + * we want a device reset. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Cause this task to be scheduled in the SCSI error + * handler thread. + */ + isci_execpath_callback(isci_host, task, + sas_task_abort); + + /* Change the status, since we are holding + * the I/O until it is managed by the SCSI + * error handler. + */ + status = SCI_SUCCESS; + } + + out: + if (status != SCI_SUCCESS) { + /* release dma memory on failure. */ + isci_request_free(isci_host, request); + request = NULL; + ret = SCI_FAILURE; + } + + *isci_request = request; + return ret; } + + + diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 06786ec..932ea76 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -58,7 +58,8 @@ #include "isci.h" #include "host.h" -#include "scic_sds_request.h" +#include "scu_task_context.h" +#include "stp_request.h" /** * struct isci_request_status - This enum defines the possible states of an I/O @@ -82,6 +83,151 @@ enum task_type { tmf_task = 1 }; +enum sci_request_protocol { + SCIC_NO_PROTOCOL, + SCIC_SMP_PROTOCOL, + SCIC_SSP_PROTOCOL, + SCIC_STP_PROTOCOL +}; /* XXX remove me, use sas_task.dev instead */; + +struct scic_sds_request { + /** + * This field contains the information for the base request state machine. + */ + struct sci_base_state_machine state_machine; + + /** + * This field simply points to the controller to which this IO request + * is associated. + */ + struct scic_sds_controller *owning_controller; + + /** + * This field simply points to the remote device to which this IO request + * is associated. + */ + struct scic_sds_remote_device *target_device; + + /** + * This field is utilized to determine if the SCI user is managing + * the IO tag for this request or if the core is managing it. + */ + bool was_tag_assigned_by_user; + + /** + * This field indicates the IO tag for this request. The IO tag is + * comprised of the task_index and a sequence count. The sequence count + * is utilized to help identify tasks from one life to another. + */ + u16 io_tag; + + /** + * This field specifies the protocol being utilized for this + * IO request. + */ + enum sci_request_protocol protocol; + + /** + * This field indicates the completion status taken from the SCUs + * completion code. It indicates the completion result for the SCU hardware. + */ + u32 scu_status; + + /** + * This field indicates the completion status returned to the SCI user. It + * indicates the users view of the io request completion. + */ + u32 sci_status; + + /** + * This field contains the value to be utilized when posting (e.g. Post_TC, + * Post_TC_Abort) this request to the silicon. + */ + u32 post_context; + + struct scu_task_context *task_context_buffer; + struct scu_task_context tc ____cacheline_aligned; + + /* could be larger with sg chaining */ + #define SCU_SGL_SIZE ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2) + struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); + + /** + * This field indicates if this request is a task management request or + * normal IO request. + */ + bool is_task_management_request; + + /** + * This field indicates that this request contains an initialized started + * substate machine. + */ + bool has_started_substate_machine; + + /** + * This field is a pointer to the stored rx frame data. It is used in STP + * internal requests and SMP response frames. If this field is non-NULL the + * saved frame must be released on IO request completion. + * + * @todo In the future do we want to keep a list of RX frame buffers? + */ + u32 saved_rx_frame_index; + + /** + * This field specifies the data necessary to manage the sub-state + * machine executed while in the SCI_BASE_REQUEST_STATE_STARTED state. + */ + struct sci_base_state_machine started_substate_machine; + + /** + * This field specifies the current state handlers in place for this + * IO Request object. This field is updated each time the request + * changes state. + */ + const struct scic_sds_io_request_state_handler *state_handlers; + + /** + * This field in the recorded device sequence for the io request. This is + * recorded during the build operation and is compared in the start + * operation. If the sequence is different then there was a change of + * devices from the build to start operations. + */ + u8 device_sequence; + + union { + struct { + union { + struct ssp_cmd_iu cmd; + struct ssp_task_iu tmf; + }; + union { + struct ssp_response_iu rsp; + u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; + }; + } ssp; + + struct { + struct smp_req cmd; + struct smp_resp rsp; + } smp; + + struct { + struct scic_sds_stp_request req; + struct host_to_dev_fis cmd; + struct dev_to_host_fis rsp; + } stp; + }; + +}; + +static inline struct scic_sds_request *to_sci_req(struct scic_sds_stp_request *stp_req) +{ + struct scic_sds_request *sci_req; + + sci_req = container_of(stp_req, typeof(*sci_req), stp.req); + return sci_req; +} + struct isci_request { enum isci_request_status status; enum task_type ttype; @@ -126,6 +272,273 @@ static inline struct isci_request *sci_req_to_ireq(struct scic_sds_request *sci_ } /** + * enum sci_base_request_states - This enumeration depicts all the states for + * the common request state machine. + * + * + */ +enum sci_base_request_states { + /** + * Simply the initial state for the base request state machine. + */ + SCI_BASE_REQUEST_STATE_INITIAL, + + /** + * This state indicates that the request has been constructed. This state + * is entered from the INITIAL state. + */ + SCI_BASE_REQUEST_STATE_CONSTRUCTED, + + /** + * This state indicates that the request has been started. This state is + * entered from the CONSTRUCTED state. + */ + SCI_BASE_REQUEST_STATE_STARTED, + + /** + * This state indicates that the request has completed. + * This state is entered from the STARTED state. This state is entered from + * the ABORTING state. + */ + SCI_BASE_REQUEST_STATE_COMPLETED, + + /** + * This state indicates that the request is in the process of being + * terminated/aborted. + * This state is entered from the CONSTRUCTED state. + * This state is entered from the STARTED state. + */ + SCI_BASE_REQUEST_STATE_ABORTING, + + /** + * Simply the final state for the base request state machine. + */ + SCI_BASE_REQUEST_STATE_FINAL, +}; + +typedef enum sci_status (*scic_sds_io_request_handler_t) + (struct scic_sds_request *request); +typedef enum sci_status (*scic_sds_io_request_frame_handler_t) + (struct scic_sds_request *req, u32 frame); +typedef enum sci_status (*scic_sds_io_request_event_handler_t) + (struct scic_sds_request *req, u32 event); +typedef enum sci_status (*scic_sds_io_request_task_completion_handler_t) + (struct scic_sds_request *req, u32 completion_code); + +/** + * struct scic_sds_io_request_state_handler - This is the SDS core definition + * of the state handlers. + * + * + */ +struct scic_sds_io_request_state_handler { + /** + * The start_handler specifies the method invoked when a user attempts to + * start a request. + */ + scic_sds_io_request_handler_t start_handler; + + /** + * The abort_handler specifies the method invoked when a user attempts to + * abort a request. + */ + scic_sds_io_request_handler_t abort_handler; + + /** + * The complete_handler specifies the method invoked when a user attempts to + * complete a request. + */ + scic_sds_io_request_handler_t complete_handler; + + scic_sds_io_request_task_completion_handler_t tc_completion_handler; + scic_sds_io_request_event_handler_t event_handler; + scic_sds_io_request_frame_handler_t frame_handler; + +}; + +extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[]; + +/** + * scic_sds_request_get_controller() - + * + * This macro will return the controller for this io request object + */ +#define scic_sds_request_get_controller(sci_req) \ + ((sci_req)->owning_controller) + +/** + * scic_sds_request_get_device() - + * + * This macro will return the device for this io request object + */ +#define scic_sds_request_get_device(sci_req) \ + ((sci_req)->target_device) + +/** + * scic_sds_request_get_port() - + * + * This macro will return the port for this io request object + */ +#define scic_sds_request_get_port(sci_req) \ + scic_sds_remote_device_get_port(scic_sds_request_get_device(sci_req)) + +/** + * scic_sds_request_get_post_context() - + * + * This macro returns the constructed post context result for the io request. + */ +#define scic_sds_request_get_post_context(sci_req) \ + ((sci_req)->post_context) + +/** + * scic_sds_request_get_task_context() - + * + * This is a helper macro to return the os handle for this request object. + */ +#define scic_sds_request_get_task_context(request) \ + ((request)->task_context_buffer) + +/** + * scic_sds_request_set_status() - + * + * This macro will set the scu hardware status and sci request completion + * status for an io request. + */ +#define scic_sds_request_set_status(request, scu_status_code, sci_status_code) \ + { \ + (request)->scu_status = (scu_status_code); \ + (request)->sci_status = (sci_status_code); \ + } + +#define scic_sds_request_complete(a_request) \ + ((a_request)->state_handlers->complete_handler(a_request)) + + +extern enum sci_status +scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code); + +/** + * SCU_SGL_ZERO() - + * + * This macro zeros the hardware SGL element data + */ +#define SCU_SGL_ZERO(scu_sge) \ + { \ + (scu_sge).length = 0; \ + (scu_sge).address_lower = 0; \ + (scu_sge).address_upper = 0; \ + (scu_sge).address_modifier = 0; \ + } + +/** + * SCU_SGL_COPY() - + * + * This macro copys the SGL Element data from the host os to the hardware SGL + * elment data + */ +#define SCU_SGL_COPY(scu_sge, os_sge) \ + { \ + (scu_sge).length = sg_dma_len(sg); \ + (scu_sge).address_upper = \ + upper_32_bits(sg_dma_address(sg)); \ + (scu_sge).address_lower = \ + lower_32_bits(sg_dma_address(sg)); \ + (scu_sge).address_modifier = 0; \ + } + +void scic_sds_request_build_sgl(struct scic_sds_request *sci_req); +void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req); +void scic_sds_smp_request_assign_buffers(struct scic_sds_request *sci_req); +enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req); +enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *sci_req); +void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req); +enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, + u32 event_code); +enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index); +enum sci_status scic_sds_task_request_terminate(struct scic_sds_request *sci_req); +enum sci_status scic_sds_request_started_state_abort_handler(struct scic_sds_request *sci_req); + +/** + * enum _scic_sds_io_request_started_task_mgmt_substates - This enumeration + * depicts all of the substates for a task management request to be + * performed in the STARTED super-state. + * + * + */ +enum scic_sds_raw_request_started_task_mgmt_substates { + /** + * The AWAIT_TC_COMPLETION sub-state indicates that the started raw + * task management request is waiting for the transmission of the + * initial frame (i.e. command, task, etc.). + */ + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION, + + /** + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE, +}; + + +/** + * enum _scic_sds_smp_request_started_substates - This enumeration depicts all + * of the substates for a SMP request to be performed in the STARTED + * super-state. + * + * + */ +enum scic_sds_smp_request_started_substates { + /** + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE, + + /** + * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP request is + * waiting for the transmission of the initial frame (i.e. command, task, etc.). + */ + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, +}; + + + +/* XXX open code in caller */ +static inline void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, + dma_addr_t phys_addr) +{ + struct isci_request *ireq = sci_req_to_ireq(sci_req); + dma_addr_t offset; + + BUG_ON(phys_addr < ireq->request_daddr); + + offset = phys_addr - ireq->request_daddr; + + BUG_ON(offset >= sizeof(*ireq)); + + return (char *)ireq + offset; +} + +/* XXX open code in caller */ +static inline dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sci_req, + void *virt_addr) +{ + struct isci_request *ireq = sci_req_to_ireq(sci_req); + + char *requested_addr = (char *)virt_addr; + char *base_addr = (char *)ireq; + + BUG_ON(requested_addr < base_addr); + BUG_ON((requested_addr - base_addr) >= sizeof(*ireq)); + + return ireq->request_daddr + (requested_addr - base_addr); +} + +/** * This function gets the status of the request object. * @request: This parameter points to the isci_request object * @@ -337,12 +750,6 @@ static inline void isci_request_unmap_sgl( } } - -void isci_request_io_request_complete( - struct isci_host *isci_host, - struct isci_request *request, - enum sci_io_status completion_status); - /** * isci_request_io_request_get_next_sge() - This function is called by the sci * core to retrieve the next sge for a given request. @@ -385,13 +792,16 @@ static inline void *isci_request_io_request_get_next_sge( return ret; } - -void isci_terminate_pending_requests( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - enum isci_request_status new_request_state); - - - - +void isci_terminate_pending_requests(struct isci_host *isci_host, + struct isci_remote_device *isci_device, + enum isci_request_status new_request_state); +enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, + struct scic_sds_request *sci_req); +enum sci_status scic_task_request_construct_ssp(struct scic_sds_request *sci_req); +enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req); +enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req); +void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); +void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); #endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 08dabf0..b9b9271 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -56,8 +56,6 @@ #include #include "isci.h" #include "remote_device.h" -#include "scic_io_request.h" -#include "scic_task_request.h" #include "task.h" #include "request.h" #include "sata.h" diff --git a/drivers/scsi/isci/smp_request.c b/drivers/scsi/isci/smp_request.c new file mode 100644 index 0000000..d4750a7 --- /dev/null +++ b/drivers/scsi/isci/smp_request.c @@ -0,0 +1,518 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include "state_machine.h" +#include "remote_device.h" +#include "request.h" +#include "scu_completion_codes.h" +#include "scu_task_context.h" +#include "host.h" + +static void scu_smp_request_construct_task_context( + struct scic_sds_request *sci_req, + struct smp_req *smp_req); + +void scic_sds_smp_request_assign_buffers(struct scic_sds_request *sci_req) +{ + if (sci_req->was_tag_assigned_by_user == false) + sci_req->task_context_buffer = &sci_req->tc; +} + +/* + * This function will fill in the SCU Task Context for a SMP request. The + * following important settings are utilized: -# task_type == + * SCU_TASK_TYPE_SMP. This simply indicates that a normal request type + * (i.e. non-raw frame) is being utilized to perform task management. -# + * control_frame == 1. This ensures that the proper endianess is set so + * that the bytes are transmitted in the right order for a smp request frame. + * @sci_req: This parameter specifies the smp request object being + * constructed. + * + */ +static void +scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, + struct smp_req *smp_req) +{ + dma_addr_t dma_addr; + struct scic_sds_controller *scic; + struct scic_sds_remote_device *sci_dev; + struct scic_sds_port *sci_port; + struct scu_task_context *task_context; + ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32); + + /* byte swap the smp request. */ + sci_swab32_cpy(&sci_req->smp.cmd, smp_req, + word_cnt); + + task_context = scic_sds_request_get_task_context(sci_req); + + scic = scic_sds_request_get_controller(sci_req); + sci_dev = scic_sds_request_get_device(sci_req); + sci_port = scic_sds_request_get_port(sci_req); + + /* + * Fill in the TC with the its required data + * 00h + */ + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = sci_dev->connection_rate; + task_context->protocol_engine_index = + scic_sds_controller_get_protocol_engine_group(scic); + task_context->logical_port_index = scic_sds_port_get_index(sci_port); + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; + task_context->abort = 0; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + /* 04h */ + task_context->remote_node_index = sci_dev->rnc.remote_node_index; + task_context->command_code = 0; + task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; + + /* 08h */ + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 1; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + /* 0ch */ + task_context->address_modifier = 0; + + /* 10h */ + task_context->ssp_command_iu_length = smp_req->req_len; + + /* 14h */ + task_context->transfer_length_bytes = 0; + + /* + * 18h ~ 30h, protocol specific + * since commandIU has been build by framework at this point, we just + * copy the frist DWord from command IU to this location. */ + memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32)); + + /* + * 40h + * "For SMP you could program it to zero. We would prefer that way + * so that done code will be consistent." - Venki + */ + task_context->task_phase = 0; + + if (sci_req->was_tag_assigned_by_user) { + /* + * Build the task context now since we have already read + * the data + */ + sci_req->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group(scic) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(sci_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + scic_sds_io_tag_get_index(sci_req->io_tag)); + } else { + /* + * Build the task context now since we have already read + * the data. + * I/O tag index is not assigned because we have to wait + * until we get a TCi. + */ + sci_req->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group(scic) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(sci_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); + } + + /* + * Copy the physical address for the command buffer to the SCU Task + * Context command buffer should not contain command header. + */ + dma_addr = scic_io_request_get_dma_addr(sci_req, + ((char *) &sci_req->smp.cmd) + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* SMP response comes as UF, so no need to set response IU address. */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + +/* + * This function processes an unsolicited frame while the SMP request is waiting + * for a response frame. It will copy the response data, release the + * unsolicited frame, and transition the request to the + * SCI_BASE_REQUEST_STATE_COMPLETED state. + * @sci_req: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This function returns an indication of whether the response frame was handled + * successfully or not. SCI_SUCCESS Currently this value is always returned and + * indicates successful processing of the TC response. + */ +static enum sci_status +scic_sds_smp_request_await_response_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + void *frame_header; + struct smp_resp *rsp_hdr = &sci_req->smp.rsp; + ssize_t word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); + + status = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_request_get_controller(sci_req)->uf_control), + frame_index, + &frame_header); + + /* byte swap the header. */ + sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); + + if (rsp_hdr->frame_type == SMP_RESPONSE) { + void *smp_resp; + + status = scic_sds_unsolicited_frame_control_get_buffer( + &(scic_sds_request_get_controller(sci_req)->uf_control), + frame_index, + &smp_resp); + + word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / + sizeof(u32); + + sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, + smp_resp, word_cnt); + + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); + + sci_base_state_machine_change_state( + &sci_req->started_substate_machine, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); + } else { + /* This was not a response frame why did it get forwarded? */ + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: SCIC SMP Request 0x%p received unexpected frame " + "%d type 0x%02x\n", + __func__, + sci_req, + frame_index, + rsp_hdr->frame_type); + + scic_sds_request_set_status( + sci_req, + SCU_TASK_DONE_SMP_FRM_TYPE_ERR, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + } + + scic_sds_controller_release_frame(sci_req->owning_controller, + frame_index); + + return SCI_SUCCESS; +} + + +/** + * This method processes an abnormal TC completion while the SMP request is + * waiting for a response frame. It decides what happened to the IO based + * on TC completion status. + * @sci_req: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* + * In the AWAIT RESPONSE state, any TC completion is unexpected. + * but if the TC has success status, we complete the IO anyway. */ + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + /* + * These status has been seen in a specific LSI expander, which sometimes + * is not able to send smp response within 2 ms. This causes our hardware + * break the connection and set TC completion with one of these SMP_XXX_XX_ERR + * status. For these type of error, we ask scic user to retry the request. */ + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + + +/** + * This method processes the completions transport layer (TL) status to + * determine if the SMP request was sent successfully. If the SMP request + * was sent successfully, then the state for the SMP request transits to + * waiting for a response frame. + * @sci_req: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + + +static const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[] = { + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, + .frame_handler = scic_sds_smp_request_await_response_frame_handler, + }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, + } +}; + +/** + * This method performs the actions required when entering the + * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This + * includes setting the IO request state handlers for this sub-state. + * @object: This parameter specifies the request object for which the sub-state + * change is occurring. + * + * none. + */ +static void scic_sds_smp_request_started_await_response_substate_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_smp_request_started_substate_handler_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE + ); +} + +/** + * This method performs the actions required when entering the + * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION sub-state. + * This includes setting the SMP request state handlers for this sub-state. + * @object: This parameter specifies the request object for which the sub-state + * change is occurring. + * + * none. + */ +static void scic_sds_smp_request_started_await_tc_completion_substate_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_smp_request_started_substate_handler_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION + ); +} + +static const struct sci_base_state scic_sds_smp_request_started_substate_table[] = { + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { + .enter_state = scic_sds_smp_request_started_await_response_substate_enter, + }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { + .enter_state = scic_sds_smp_request_started_await_tc_completion_substate_enter, + }, +}; + +/** + * This method is called by the SCI user to build an SMP IO request. + * + * - The user must have previously called scic_io_request_construct() on the + * supplied IO request. Indicate if the controller successfully built the IO + * request. SCI_SUCCESS This value is returned if the IO request was + * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned + * if the remote_device does not support the SMP protocol. + * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not + * properly set the association between the SCIC IO request and the user's IO + * request. + */ +enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) +{ + struct smp_req *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); + + if (!smp_req) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + + sci_req->protocol = SCIC_SMP_PROTOCOL; + sci_req->has_started_substate_machine = true; + + /* Construct the started sub-state machine. */ + sci_base_state_machine_construct( + &sci_req->started_substate_machine, + sci_req, + scic_sds_smp_request_started_substate_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE + ); + + /* Construct the SMP SCU Task Context */ + memcpy(smp_req, &sci_req->smp.cmd, sizeof(*smp_req)); + + /* + * Look at the SMP requests' header fields; for certain SAS 1.x SMP + * functions under SAS 2.0, a zero request length really indicates + * a non-zero default length. */ + if (smp_req->req_len == 0) { + switch (smp_req->func) { + case SMP_DISCOVER: + case SMP_REPORT_PHY_ERR_LOG: + case SMP_REPORT_PHY_SATA: + case SMP_REPORT_ROUTE_INFO: + smp_req->req_len = 2; + break; + case SMP_CONF_ROUTE_INFO: + case SMP_PHY_CONTROL: + case SMP_PHY_TEST_FUNCTION: + smp_req->req_len = 9; + break; + /* Default - zero is a valid default for 2.0. */ + } + } + + scu_smp_request_construct_task_context(sci_req, smp_req); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); + + kfree(smp_req); + + return SCI_SUCCESS; +} diff --git a/drivers/scsi/isci/ssp_request.c b/drivers/scsi/isci/ssp_request.c new file mode 100644 index 0000000..4b6317a --- /dev/null +++ b/drivers/scsi/isci/ssp_request.c @@ -0,0 +1,240 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" +#include "request.h" +#include "state_machine.h" +#include "scu_task_context.h" +#include "scu_completion_codes.h" + +/** + * This method processes the completions transport layer (TL) status to + * determine if the RAW task management frame was sent successfully. If the + * raw frame was sent successfully, then the state for the task request + * transitions to waiting for a response frame. + * @sci_req: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->started_substate_machine, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE + ); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + /* + * Currently, the decision is to simply allow the task request to + * timeout if the task IU wasn't received successfully. + * There is a potential for receiving multiple task responses if we + * decide to send the task IU again. */ + dev_warn(scic_to_dev(sci_req->owning_controller), + "%s: TaskRequest:0x%p CompletionCode:%x - " + "ACK/NAK timeout\n", + __func__, + sci_req, + completion_code); + + sci_base_state_machine_change_state( + &sci_req->started_substate_machine, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +/** + * This method is responsible for processing a terminate/abort request for this + * TC while the request is waiting for the task management response + * unsolicited frame. + * @sci_req: This parameter specifies the request for which the + * termination was requested. + * + * This method returns an indication as to whether the abort request was + * successfully handled. need to update to ensure the received UF doesn't cause + * damage to subsequent requests (i.e. put the extended tag in a holding + * pattern for this particular device). + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler( + struct scic_sds_request *request) +{ + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_ABORTING); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + return SCI_SUCCESS; +} + +/** + * This method processes an unsolicited frame while the task mgmt request is + * waiting for a response frame. It will copy the response data, release + * the unsolicited frame, and transition the request to the + * SCI_BASE_REQUEST_STATE_COMPLETED state. + * @sci_req: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This method returns an indication of whether the TC response frame was + * handled successfully or not. SCI_SUCCESS Currently this value is always + * returned and indicates successful processing of the TC response. Should + * probably update to check frame type and make sure it is a response frame. + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + scic_sds_io_request_copy_response(request); + + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + scic_sds_controller_release_frame(request->owning_controller, + frame_index); + return SCI_SUCCESS; +} + +static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[] = { + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, + }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { + .abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, + .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, + } +}; + +/** + * This method performs the actions required when entering the + * SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION + * sub-state. This includes setting the IO request state handlers for this + * sub-state. + * @object: This parameter specifies the request object for which the sub-state + * change is occurring. + * + * none. + */ +static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_ssp_task_request_started_substate_handler_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION + ); +} + +/** + * This method performs the actions required when entering the + * SCIC_SDS_IO_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This + * includes setting the IO request state handlers for this sub-state. + * @object: This parameter specifies the request object for which the sub-state + * change is occurring. + * + * none. + */ +static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_ssp_task_request_started_substate_handler_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE + ); +} + +const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[] = { + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { + .enter_state = scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter, + }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { + .enter_state = scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter, + }, +}; + diff --git a/drivers/scsi/isci/stp_request.c b/drivers/scsi/isci/stp_request.c new file mode 100644 index 0000000..298086a --- /dev/null +++ b/drivers/scsi/isci/stp_request.c @@ -0,0 +1,1590 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include "sas.h" +#include "state_machine.h" +#include "remote_device.h" +#include "stp_request.h" +#include "unsolicited_frame_control.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "scu_task_context.h" +#include "request.h" + +void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) +{ + if (sci_req->was_tag_assigned_by_user == false) + sci_req->task_context_buffer = &sci_req->tc; +} + +/** + * This method is will fill in the SCU Task Context for any type of SATA + * request. This is called from the various SATA constructors. + * @sci_req: The general IO request object which is to be used in + * constructing the SCU task context. + * @task_context: The buffer pointer for the SCU task context which is being + * constructed. + * + * The general io request construction is complete. The buffer assignment for + * the command buffer is complete. none Revisit task context construction to + * determine what is common for SSP/SMP/STP task context structures. + */ +static void scu_sata_reqeust_construct_task_context( + struct scic_sds_request *sci_req, + struct scu_task_context *task_context) +{ + dma_addr_t dma_addr; + struct scic_sds_controller *controller; + struct scic_sds_remote_device *target_device; + struct scic_sds_port *target_port; + + controller = scic_sds_request_get_controller(sci_req); + target_device = scic_sds_request_get_device(sci_req); + target_port = scic_sds_request_get_port(sci_req); + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->initiator_request = 1; + task_context->connection_rate = target_device->connection_rate; + task_context->protocol_engine_index = + scic_sds_controller_get_protocol_engine_group(controller); + task_context->logical_port_index = + scic_sds_port_get_index(target_port); + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = + scic_sds_remote_device_get_index(sci_req->target_device); + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + task_context->task_phase = 0x01; + + task_context->ssp_command_iu_length = + (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); + + /* Set the first word of the H2D REG FIS */ + task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd; + + if (sci_req->was_tag_assigned_by_user) { + /* + * Build the task context now since we have already read + * the data + */ + sci_req->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + scic_sds_io_tag_get_index(sci_req->io_tag)); + } else { + /* + * Build the task context now since we have already read + * the data. + * I/O tag index is not assigned because we have to wait + * until we get a TCi. + */ + sci_req->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); + } + + /* + * Copy the physical address for the command buffer to the SCU Task + * Context. We must offset the command buffer by 4 bytes because the + * first 4 bytes are transfered in the body of the TC. + */ + dma_addr = scic_io_request_get_dma_addr(sci_req, + ((char *) &sci_req->stp.cmd) + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* SATA Requests do not have a response buffer */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + +/** + * + * @sci_req: + * + * This method will perform any general sata request construction. What part of + * SATA IO request construction is general? none + */ +static void scic_sds_stp_non_ncq_request_construct( + struct scic_sds_request *sci_req) +{ + sci_req->has_started_substate_machine = true; +} + +/** + * + * @sci_req: This parameter specifies the request to be constructed as an + * optimized request. + * @optimized_task_type: This parameter specifies whether the request is to be + * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A + * value of 1 indicates NCQ. + * + * This method will perform request construction common to all types of STP + * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method + * returns an indication as to whether the construction was successful. + */ +static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req, + u8 optimized_task_type, + u32 len, + enum dma_data_direction dir) +{ + struct scu_task_context *task_context = sci_req->task_context_buffer; + + /* Build the STP task context structure */ + scu_sata_reqeust_construct_task_context(sci_req, task_context); + + /* Copy over the SGL elements */ + scic_sds_request_build_sgl(sci_req); + + /* Copy over the number of bytes to be transfered */ + task_context->transfer_length_bytes = len; + + if (dir == DMA_TO_DEVICE) { + /* + * The difference between the DMA IN and DMA OUT request task type + * values are consistent with the difference between FPDMA READ + * and FPDMA WRITE values. Add the supplied task type parameter + * to this difference to set the task type properly for this + * DATA OUT (WRITE) case. */ + task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT + - SCU_TASK_TYPE_DMA_IN); + } else { + /* + * For the DATA IN (READ) case, simply save the supplied + * optimized task type. */ + task_context->task_type = optimized_task_type; + } +} + +/** + * + * @sci_req: This parameter specifies the request to be constructed. + * + * This method will construct the STP UDMA request and its associated TC data. + * This method returns an indication as to whether the construction was + * successful. SCI_SUCCESS Currently this method always returns this value. + */ +enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req, + u32 len, + enum dma_data_direction dir) +{ + scic_sds_stp_optimized_request_construct(sci_req, + SCU_TASK_TYPE_FPDMAQ_READ, + len, dir); + return SCI_SUCCESS; +} + +/** + * scu_stp_raw_request_construct_task_context - + * @sci_req: This parameter specifies the STP request object for which to + * construct a RAW command frame task context. + * @task_context: This parameter specifies the SCU specific task context buffer + * to construct. + * + * This method performs the operations common to all SATA/STP requests + * utilizing the raw frame method. none + */ +static void scu_stp_raw_request_construct_task_context( + struct scic_sds_stp_request *stp_req, + struct scu_task_context *task_context) +{ + struct scic_sds_request *sci_req = to_sci_req(stp_req); + + scu_sata_reqeust_construct_task_context(sci_req, task_context); + + task_context->control_frame = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; + task_context->type.stp.fis_type = FIS_REGH2D; + task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); +} + +void scic_stp_io_request_set_ncq_tag( + struct scic_sds_request *req, + u16 ncq_tag) +{ + /** + * @note This could be made to return an error to the user if the user + * attempts to set the NCQ tag in the wrong state. + */ + req->task_context_buffer->type.stp.ncq_tag = ncq_tag; +} + +/** + * + * @sci_req: + * + * Get the next SGL element from the request. - Check on which SGL element pair + * we are working - if working on SLG pair element A - advance to element B - + * else - check to see if there are more SGL element pairs for this IO request + * - if there are more SGL element pairs - advance to the next pair and return + * element A struct scu_sgl_element* + */ +static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) +{ + struct scu_sgl_element *current_sgl; + struct scic_sds_request *sci_req = to_sci_req(stp_req); + struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; + + if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + if (pio_sgl->sgl_pair->B.address_lower == 0 && + pio_sgl->sgl_pair->B.address_upper == 0) { + current_sgl = NULL; + } else { + pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B; + current_sgl = &pio_sgl->sgl_pair->B; + } + } else { + if (pio_sgl->sgl_pair->next_pair_lower == 0 && + pio_sgl->sgl_pair->next_pair_upper == 0) { + current_sgl = NULL; + } else { + u64 phys_addr; + + phys_addr = pio_sgl->sgl_pair->next_pair_upper; + phys_addr <<= 32; + phys_addr |= pio_sgl->sgl_pair->next_pair_lower; + + pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr); + pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A; + current_sgl = &pio_sgl->sgl_pair->A; + } + } + + return current_sgl; +} + +/** + * + * @sci_req: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. + */ +static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +/** + * + * @request: This parameter specifies the request for which a frame has been + * received. + * @frame_index: This parameter specifies the index of the frame that has been + * received. + * + * This method processes frames received from the target while waiting for a + * device to host register FIS. If a non-register FIS is received during this + * time, it is treated as a protocol violation from an IO perspective. Indicate + * if the received frame was processed successfully. + */ +static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION); + break; + } + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, + } +}; + +static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_non_data_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + sci_req->target_device, sci_req + ); +} + +static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_non_data_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE + ); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_non_data_await_d2h_enter, + }, +}; + +enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req) +{ + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + + scic_sds_stp_non_ncq_request_construct(sci_req); + + /* Build the STP task context structure */ + scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); + + sci_base_state_machine_construct(&sci_req->started_substate_machine, + sci_req, + scic_sds_stp_request_started_non_data_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE); + + return SCI_SUCCESS; +} + +#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ + +/* transmit DATA_FIS from (current sgl + offset) for input + * parameter length. current sgl and offset is alreay stored in the IO request + */ +static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( + struct scic_sds_request *sci_req, + u32 length) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scu_task_context *task_context; + struct scu_sgl_element *current_sgl; + + /* Recycle the TC and reconstruct it for sending out DATA FIS containing + * for the data from current_sgl+offset for the input length + */ + task_context = scic_sds_controller_get_task_context_buffer(scic, + sci_req->io_tag); + + if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) + current_sgl = &stp_req->type.pio.request_current.sgl_pair->A; + else + current_sgl = &stp_req->type.pio.request_current.sgl_pair->B; + + /* update the TC */ + task_context->command_iu_upper = current_sgl->address_upper; + task_context->command_iu_lower = current_sgl->address_lower; + task_context->transfer_length_bytes = length; + task_context->type.stp.fis_type = FIS_DATA; + + /* send the new TC out. */ + return scic_controller_continue_io(sci_req); +} + +static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req) +{ + + struct scu_sgl_element *current_sgl; + u32 sgl_offset; + u32 remaining_bytes_in_current_sgl = 0; + enum sci_status status = SCI_SUCCESS; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + + sgl_offset = stp_req->type.pio.request_current.sgl_offset; + + if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); + remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset; + } else { + current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); + remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset; + } + + + if (stp_req->type.pio.pio_transfer_bytes > 0) { + if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { + /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ + status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl); + if (status == SCI_SUCCESS) { + stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; + + /* update the current sgl, sgl_offset and save for future */ + current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req); + sgl_offset = 0; + } + } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { + /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */ + scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes); + + if (status == SCI_SUCCESS) { + /* Sgl offset will be adjusted and saved for future */ + sgl_offset += stp_req->type.pio.pio_transfer_bytes; + current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes; + stp_req->type.pio.pio_transfer_bytes = 0; + } + } + } + + if (status == SCI_SUCCESS) { + stp_req->type.pio.request_current.sgl_offset = sgl_offset; + } + + return status; +} + +/** + * + * @stp_request: The request that is used for the SGL processing. + * @data_buffer: The buffer of data to be copied. + * @length: The length of the data transfer. + * + * Copy the data from the buffer for the length specified to the IO reqeust SGL + * specified data region. enum sci_status + */ +static enum sci_status +scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req, + u8 *data_buf, u32 len) +{ + struct scic_sds_request *sci_req; + struct isci_request *ireq; + u8 *src_addr; + int copy_len; + struct sas_task *task; + struct scatterlist *sg; + void *kaddr; + int total_len = len; + + sci_req = to_sci_req(stp_req); + ireq = sci_req_to_ireq(sci_req); + task = isci_request_access_task(ireq); + src_addr = data_buf; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (total_len > 0) { + struct page *page = sg_page(sg); + + copy_len = min_t(int, total_len, sg_dma_len(sg)); + kaddr = kmap_atomic(page, KM_IRQ0); + memcpy(kaddr + sg->offset, src_addr, copy_len); + kunmap_atomic(kaddr, KM_IRQ0); + total_len -= copy_len; + src_addr += copy_len; + sg = sg_next(sg); + } + } else { + BUG_ON(task->total_xfer_len < total_len); + memcpy(task->scatter, src_addr, total_len); + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: The PIO DATA IN request that is to receive the data. + * @data_buffer: The buffer to copy from. + * + * Copy the data buffer to the io request data region. enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( + struct scic_sds_stp_request *sci_req, + u8 *data_buffer) +{ + enum sci_status status; + + /* + * If there is less than 1K remaining in the transfer request + * copy just the data for the transfer */ + if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { + status = scic_sds_stp_request_pio_data_in_copy_data_buffer( + sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes); + + if (status == SCI_SUCCESS) + sci_req->type.pio.pio_transfer_bytes = 0; + } else { + /* We are transfering the whole frame so copy */ + status = scic_sds_stp_request_pio_data_in_copy_data_buffer( + sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); + + if (status == SCI_SUCCESS) + sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; + } + + return status; +} + +/** + * + * @sci_req: + * @completion_code: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return status; +} + +static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct isci_request *ireq = sci_req_to_ireq(sci_req); + struct sas_task *task = isci_request_access_task(ireq); + struct dev_to_host_fis *frame_header; + enum sci_status status; + u32 *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_PIO_SETUP: + /* Get from the frame buffer the PIO Setup Data */ + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + /* Get the data from the PIO Setup The SCU Hardware returns + * first word in the frame_header and the rest of the data is in + * the frame buffer so we need to back up one dword + */ + + /* transfer_count: first 16bits in the 4th dword */ + stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; + + /* ending_status: 4th byte in the 3rd dword */ + stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + sci_req->stp.rsp.status = stp_req->type.pio.ending_status; + + /* The next state is dependent on whether the + * request was PIO Data-in or Data out + */ + if (task->data_dir == DMA_FROM_DEVICE) { + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); + } else if (task->data_dir == DMA_TO_DEVICE) { + /* Transmit data */ + status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); + if (status != SCI_SUCCESS) + break; + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); + } + break; + case FIS_SETDEVBITS: + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + break; + case FIS_REGD2H: + if (frame_header->status & ATA_BUSY) { + /* Now why is the drive sending a D2H Register FIS when + * it is still busy? Do nothing since we are still in + * the right state. + */ + dev_dbg(scic_to_dev(scic), + "%s: SCIC PIO Request 0x%p received " + "D2H Register FIS with BSY status " + "0x%x\n", __func__, stp_req, + frame_header->status); + break; + } + + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.req, + frame_header, + frame_buffer); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + default: + /* FIXME: what do we do here? */ + break; + } + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + +static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + struct dev_to_host_fis *frame_header; + struct sata_fis_data *frame_buffer; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + if (frame_header->fis_type == FIS_DATA) { + if (stp_req->type.pio.request_current.sgl_pair == NULL) { + sci_req->saved_rx_frame_index = frame_index; + stp_req->type.pio.pio_transfer_bytes = 0; + } else { + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, + (u8 *)frame_buffer); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + } + + /* Check for the end of the transfer, are there more + * bytes remaining for this data transfer + */ + if (status != SCI_SUCCESS || + stp_req->type.pio.pio_transfer_bytes != 0) + return status; + + if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + } else { + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + } + } else { + dev_err(scic_to_dev(scic), + "%s: SCIC PIO Request 0x%p received frame %d " + "with fis type 0x%02x when expecting a data " + "fis.\n", __func__, stp_req, frame_index, + frame_header->fis_type); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + } + + return status; +} + + +/** + * + * @sci_req: + * @completion_code: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( + + struct scic_sds_request *sci_req, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + bool all_frames_transferred = false; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* Transmit data */ + if (stp_req->type.pio.pio_transfer_bytes != 0) { + status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); + if (status == SCI_SUCCESS) { + if (stp_req->type.pio.pio_transfer_bytes == 0) + all_frames_transferred = true; + } + } else if (stp_req->type.pio.pio_transfer_bytes == 0) { + /* + * this will happen if the all data is written at the + * first time after the pio setup fis is received + */ + all_frames_transferred = true; + } + + /* all data transferred. */ + if (all_frames_transferred) { + /* + * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE + * and wait for PIO_SETUP fis / or D2H REg fis. */ + sci_base_state_machine_change_state( + &sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + } + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return status; +} + +/** + * + * @request: This is the request which is receiving the event. + * @event_code: This is the event code that the request on which the request is + * expected to take action. + * + * This method will handle any link layer events while waiting for the data + * frame. enum sci_status SCI_SUCCESS SCI_FAILURE + */ +static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler( + struct scic_sds_request *request, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_specifier(event_code)) { + case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: + /* + * We are waiting for data and the SCU has R_ERR the data frame. + * Go back to waiting for the D2H Register FIS */ + sci_base_state_machine_change_state( + &request->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + + status = SCI_SUCCESS; + break; + + default: + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC PIO Request 0x%p received unexpected " + "event 0x%08x\n", + __func__, request, event_code); + + /* / @todo Should we fail the PIO request when we get an unexpected event? */ + status = SCI_FAILURE; + break; + } + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, + .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, + } +}; + +static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_pio_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + sci_req->target_device, sci_req); +} + +static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_pio_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); +} + +static void scic_sds_stp_request_started_pio_data_in_await_data_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_pio_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE + ); +} + +static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_pio_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE + ); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_await_frame_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_data_in_await_data_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_data_out_transmit_data_enter, + } +}; + +enum sci_status +scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, + bool copy_rx_frame) +{ + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; + + scic_sds_stp_non_ncq_request_construct(sci_req); + + scu_stp_raw_request_construct_task_context(stp_req, + sci_req->task_context_buffer); + + pio->current_transfer_bytes = 0; + pio->ending_error = 0; + pio->ending_status = 0; + + pio->request_current.sgl_offset = 0; + pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; + + if (copy_rx_frame) { + scic_sds_request_build_sgl(sci_req); + /* Since the IO request copy of the TC contains the same data as + * the actual TC this pointer is vaild for either. + */ + pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab; + } else { + /* The user does not want the data copied to the SGL buffer location */ + pio->request_current.sgl_pair = NULL; + } + + sci_base_state_machine_construct(&sci_req->started_substate_machine, + sci_req, + scic_sds_stp_request_started_pio_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE); + + return SCI_SUCCESS; +} + +static void scic_sds_stp_request_udma_complete_request( + struct scic_sds_request *request, + u32 scu_status, + enum sci_status sci_status) +{ + scic_sds_request_set_status(request, scu_status, sci_status); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); +} + +static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + struct dev_to_host_fis *frame_header; + enum sci_status status; + u32 *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if ((status == SCI_SUCCESS) && + (frame_header->fis_type == FIS_REGD2H)) { + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + } + + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + +static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + /* + * We must check ther response buffer to see if the D2H Register FIS was + * received before we got the TC completion. */ + if (sci_req->stp.rsp.fis_type == FIS_REGD2H) { + scic_sds_remote_device_suspend(sci_req->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); + + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + } else { + /* + * If we have an error completion status for the TC then we can expect a + * D2H register FIS from the device so we must change state to wait for it */ + sci_base_state_machine_change_state(&sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE); + } + break; + + /* + * / @todo Check to see if any of these completion status need to wait for + * / the device to host register fis. */ + /* / @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0 */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): + scic_sds_remote_device_suspend(sci_req->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); + /* Fall through to the default case */ + default: + /* All other completion status cause the IO to be complete. */ + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + break; + } + + return status; +} + +static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + + /* Use the general frame handler to copy the resposne data */ + status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); + + if (status != SCI_SUCCESS) + return status; + + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, + .frame_handler = scic_sds_stp_request_udma_general_frame_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, + }, +}; + +static void scic_sds_stp_request_started_udma_await_tc_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_udma_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE + ); +} + +/** + * + * + * This state is entered when there is an TC completion failure. The hardware + * received an unexpected condition while processing the IO request and now + * will UF the D2H register FIS to complete the IO. + */ +static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_udma_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE + ); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter, + }, +}; + +enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, + u32 len, + enum dma_data_direction dir) +{ + scic_sds_stp_non_ncq_request_construct(sci_req); + + scic_sds_stp_optimized_request_construct(sci_req, SCU_TASK_TYPE_DMA_IN, + len, dir); + + sci_base_state_machine_construct( + &sci_req->started_substate_machine, + sci_req, + scic_sds_stp_request_started_udma_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE + ); + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. + */ +static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. + */ +static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->started_substate_machine, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +/** + * + * @request: This parameter specifies the request for which a frame has been + * received. + * @frame_index: This parameter specifies the index of the frame that has been + * received. + * + * This method processes frames received from the target while waiting for a + * device to host register FIS. If a non-register FIS is received during this + * time, it is treated as a protocol violation from an IO perspective. Indicate + * if the received frame was processed successfully. + */ +static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION); + break; + } + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, + }, +}; + +static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_soft_reset_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + sci_req->target_device, sci_req + ); +} + +static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + struct scu_task_context *task_context; + struct host_to_dev_fis *h2d_fis; + enum sci_status status; + + /* Clear the SRST bit */ + h2d_fis = &sci_req->stp.cmd; + h2d_fis->control = 0; + + /* Clear the TC control bit */ + task_context = scic_sds_controller_get_task_context_buffer( + sci_req->owning_controller, sci_req->io_tag); + task_context->control_frame = 0; + + status = scic_controller_continue_io(sci_req); + if (status == SCI_SUCCESS) { + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_soft_reset_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE + ); + } +} + +static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_stp_request_started_soft_reset_substate_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE + ); +} + +static const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[] = { + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_d2h_response_enter, + }, +}; + +enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req) +{ + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + + scic_sds_stp_non_ncq_request_construct(sci_req); + + /* Build the STP task context structure */ + scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); + + sci_base_state_machine_construct(&sci_req->started_substate_machine, + sci_req, + scic_sds_stp_request_started_soft_reset_substate_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); + + return SCI_SUCCESS; +} diff --git a/drivers/scsi/isci/stp_request.h b/drivers/scsi/isci/stp_request.h new file mode 100644 index 0000000..eb14874 --- /dev/null +++ b/drivers/scsi/isci/stp_request.h @@ -0,0 +1,195 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_STP_REQUEST_T_ +#define _SCIC_SDS_STP_REQUEST_T_ + +#include +#include + +struct scic_sds_stp_request { + union { + u32 ncq; + + u32 udma; + + struct scic_sds_stp_pio_request { + /** + * Total transfer for the entire PIO request recorded at request constuction + * time. + * + * @todo Should we just decrement this value for each byte of data transitted + * or received to elemenate the current_transfer_bytes field? + */ + u32 total_transfer_bytes; + + /** + * Total number of bytes received/transmitted in data frames since the start + * of the IO request. At the end of the IO request this should equal the + * total_transfer_bytes. + */ + u32 current_transfer_bytes; + + /** + * The number of bytes requested in the in the PIO setup. + */ + u32 pio_transfer_bytes; + + /** + * PIO Setup ending status value to tell us if we need to wait for another FIS + * or if the transfer is complete. On the receipt of a D2H FIS this will be + * the status field of that FIS. + */ + u8 ending_status; + + /** + * On receipt of a D2H FIS this will be the ending error field if the + * ending_status has the SATA_STATUS_ERR bit set. + */ + u8 ending_error; + + struct scic_sds_request_pio_sgl { + struct scu_sgl_element_pair *sgl_pair; + u8 sgl_set; + u32 sgl_offset; + } request_current; + } pio; + + struct { + /** + * The number of bytes requested in the PIO setup before CDB data frame. + */ + u32 device_preferred_cdb_length; + } packet; + } type; +}; + +/** + * enum scic_sds_stp_request_started_udma_substates - This enumeration depicts + * the various sub-states associated with a SATA/STP UDMA protocol operation. + * + * + */ +enum scic_sds_stp_request_started_udma_substates { + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE, +}; + +/** + * enum scic_sds_stp_request_started_non_data_substates - This enumeration + * depicts the various sub-states associated with a SATA/STP non-data + * protocol operation. + * + * + */ +enum scic_sds_stp_request_started_non_data_substates { + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE, +}; + +/** + * enum scic_sds_stp_request_started_soft_reset_substates - THis enumeration + * depicts the various sub-states associated with a SATA/STP soft reset + * operation. + * + * + */ +enum scic_sds_stp_request_started_soft_reset_substates { + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE, +}; + +/* This is the enumeration of the SATA PIO DATA IN started substate machine. */ +enum _scic_sds_stp_request_started_pio_substates { + /** + * While in this state the IO request object is waiting for the TC completion + * notification for the H2D Register FIS + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE, + + /** + * While in this state the IO request object is waiting for either a PIO Setup + * FIS or a D2H register FIS. The type of frame received is based on the + * result of the prior frame and line conditions. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE, + + /** + * While in this state the IO request object is waiting for a DATA frame from + * the device. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE, + + /** + * While in this state the IO request object is waiting to transmit the next data + * frame to the device. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE, +}; + +struct scic_sds_request; + +enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, + bool copy_rx_frame); +enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, + u32 transfer_length, + enum dma_data_direction dir); +enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req); +enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req); +enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req, + u32 transfer_length, + enum dma_data_direction dir); +#endif /* _SCIC_SDS_STP_REQUEST_T_ */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 2a86038..078e2ee 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -56,15 +56,12 @@ #include #include #include "sas.h" -#include "scic_task_request.h" -#include "scic_io_request.h" #include "remote_device.h" #include "remote_node_context.h" #include "isci.h" #include "request.h" #include "sata.h" #include "task.h" -#include "scic_sds_request.h" #include "timers.h" /** diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c index 8d68dcc..12e6763 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.c +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -56,7 +56,6 @@ #include "host.h" #include "unsolicited_frame_control.h" #include "registers.h" -#include "sci_util.h" /** * This method will program the unsolicited frames (UFs) into the UF address @@ -93,10 +92,8 @@ static void scic_sds_unsolicited_frame_control_construct_frames( for (index = 0; index < unused_uf_header_entries; index++) { uf = &uf_control->buffers.array[index]; - sci_cb_make_physical_address( - uf_control->address_table.array[index], 0, 0 - ); uf->buffer = NULL; + uf_control->address_table.array[index] = 0; uf->header = &uf_control->headers.array[index]; uf->state = UNSOLICITED_FRAME_EMPTY; } -- cgit v0.10.2 From d35bc1bd18ab9e986cfb67c5a281a70cfd717f05 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2011 02:28:45 -0700 Subject: isci: uplevel phy infrastructure Merge core/scic_sds_phy.[ch] into phy.[ch] Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index a7d1eb3..2830a97 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -12,4 +12,3 @@ isci-objs := init.o phy.o request.o sata.o \ smp_request.o \ core/scic_sds_port.o \ core/scic_sds_port_configuration_agent.o \ - core/scic_sds_phy.o \ diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h deleted file mode 100644 index f046b4a..0000000 --- a/drivers/scsi/isci/core/scic_phy.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_PHY_H_ -#define _SCIC_PHY_H_ - -/** - * This file contains all of the interface methods that can be called by an - * SCIC user on a phy (SAS or SATA) object. - * - * - */ - - -#include -#include - -struct scic_sds_phy; -struct scic_sds_port; - - -enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy); - -struct scic_phy_cap { - union { - struct { - /* - * The SAS specification indicates the start bit shall - * always be set to - * 1. This implementation will have the start bit set - * to 0 if the PHY CAPABILITIES were either not - * received or speed negotiation failed. - */ - u8 start:1; - u8 tx_ssc_type:1; - u8 res1:2; - u8 req_logical_linkrate:4; - - u32 gen1_no_ssc:1; - u32 gen1_ssc:1; - u32 gen2_no_ssc:1; - u32 gen2_ssc:1; - u32 gen3_no_ssc:1; - u32 gen3_ssc:1; - u32 res2:17; - u32 parity:1; - }; - u32 all; - }; -} __packed; - -/* this data structure reflects the link layer transmit identification reg */ -struct scic_phy_proto { - union { - struct { - u16 _r_a:1; - u16 smp_iport:1; - u16 stp_iport:1; - u16 ssp_iport:1; - u16 _r_b:4; - u16 _r_c:1; - u16 smp_tport:1; - u16 stp_tport:1; - u16 ssp_tport:1; - u16 _r_d:4; - }; - u16 all; - }; -} __packed; - - -/** - * struct scic_phy_properties - This structure defines the properties common to - * all phys that can be retrieved. - * - * - */ -struct scic_phy_properties { - /** - * This field specifies the port that currently contains the - * supplied phy. This field may be set to NULL - * if the phy is not currently contained in a port. - */ - struct scic_sds_port *owning_port; - - /** - * This field specifies the link rate at which the phy is - * currently operating. - */ - enum sas_linkrate negotiated_link_rate; - - /** - * This field specifies the index of the phy in relation to other - * phys within the controller. This index is zero relative. - */ - u8 index; -}; - -/** - * struct scic_sas_phy_properties - This structure defines the properties, - * specific to a SAS phy, that can be retrieved. - * - * - */ -struct scic_sas_phy_properties { - /** - * This field delineates the Identify Address Frame received - * from the remote end point. - */ - struct sas_identify_frame rcvd_iaf; - - /** - * This field delineates the Phy capabilities structure received - * from the remote end point. - */ - struct scic_phy_cap rcvd_cap; - -}; - -/** - * struct scic_sata_phy_properties - This structure defines the properties, - * specific to a SATA phy, that can be retrieved. - * - * - */ -struct scic_sata_phy_properties { - /** - * This field delineates the signature FIS received from the - * attached target. - */ - struct dev_to_host_fis signature_fis; - - /** - * This field specifies to the user if a port selector is connected - * on the specified phy. - */ - bool is_port_selector_present; - -}; - -/** - * enum scic_phy_counter_id - This enumeration depicts the various pieces of - * optional information that can be retrieved for a specific phy. - * - * - */ -enum scic_phy_counter_id { - /** - * This PHY information field tracks the number of frames received. - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME, - - /** - * This PHY information field tracks the number of frames transmitted. - */ - SCIC_PHY_COUNTER_TRANSMITTED_FRAME, - - /** - * This PHY information field tracks the number of DWORDs received. - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD, - - /** - * This PHY information field tracks the number of DWORDs transmitted. - */ - SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD, - - /** - * This PHY information field tracks the number of times DWORD - * synchronization was lost. - */ - SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR, - - /** - * This PHY information field tracks the number of received DWORDs with - * running disparity errors. - */ - SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR, - - /** - * This PHY information field tracks the number of received frames with a - * CRC error (not including short or truncated frames). - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR, - - /** - * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) - * primitives received. - */ - SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT, - - /** - * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) - * primitives transmitted. - */ - SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT, - - /** - * This PHY information field tracks the number of times the inactivity - * timer for connections on the phy has been utilized. - */ - SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED, - - /** - * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) - * primitives received. - */ - SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT, - - /** - * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) - * primitives transmitted. - */ - SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT, - - /** - * This PHY information field tracks the number of CREDIT BLOCKED - * primitives received. - * @note Depending on remote device implementation, credit blocks - * may occur regularly. - */ - SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED, - - /** - * This PHY information field contains the number of short frames - * received. A short frame is simply a frame smaller then what is - * allowed by either the SAS or SATA specification. - */ - SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME, - - /** - * This PHY information field contains the number of frames received after - * credit has been exhausted. - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT, - - /** - * This PHY information field contains the number of frames received after - * a DONE has been received. - */ - SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE, - - /** - * This PHY information field contains the number of times the phy - * failed to achieve DWORD synchronization during speed negotiation. - */ - SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR -}; - -#endif /* _SCIC_PHY_H_ */ diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h index 51e7eede..431dbd2 100644 --- a/drivers/scsi/isci/core/scic_port.h +++ b/drivers/scsi/isci/core/scic_port.h @@ -58,7 +58,7 @@ #include "isci.h" #include "sas.h" -#include "scic_phy.h" +#include "phy.h" struct scic_sds_port; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c deleted file mode 100644 index 150509b..0000000 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ /dev/null @@ -1,2277 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "sas.h" -#include "host.h" -#include "state_machine.h" -#include "scic_phy.h" -#include "scic_sds_phy.h" -#include "scic_sds_port.h" -#include "remote_node_context.h" -#include "scu_event_codes.h" -#include "timers.h" - -#define SCIC_SDS_PHY_MIN_TIMER_COUNT (SCI_MAX_PHYS) -#define SCIC_SDS_PHY_MAX_TIMER_COUNT (SCI_MAX_PHYS) - -/* Maximum arbitration wait time in micro-seconds */ -#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) - -enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) -{ - return sci_phy->max_negotiated_speed; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY Internal Methods - * ***************************************************************************** */ - -/** - * This method will initialize the phy transport layer registers - * @sci_phy: - * @transport_layer_registers - * - * enum sci_status - */ -static enum sci_status scic_sds_phy_transport_layer_initialization( - struct scic_sds_phy *sci_phy, - struct scu_transport_layer_registers __iomem *transport_layer_registers) -{ - u32 tl_control; - - sci_phy->transport_layer_registers = transport_layer_registers; - - writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, - &sci_phy->transport_layer_registers->stp_rni); - - /* - * Hardware team recommends that we enable the STP prefetch for all - * transports - */ - tl_control = readl(&sci_phy->transport_layer_registers->control); - tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); - writel(tl_control, &sci_phy->transport_layer_registers->control); - - return SCI_SUCCESS; -} - -/** - * This method will initialize the phy link layer registers - * @sci_phy: - * @link_layer_registers: - * - * enum sci_status - */ -static enum sci_status -scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, - struct scu_link_layer_registers __iomem *link_layer_registers) -{ - struct scic_sds_controller *scic = - sci_phy->owning_port->owning_controller; - int phy_idx = sci_phy->phy_index; - struct sci_phy_user_params *phy_user = - &scic->user_parameters.sds1.phys[phy_idx]; - struct sci_phy_oem_params *phy_oem = - &scic->oem_parameters.sds1.phys[phy_idx]; - u32 phy_configuration; - struct scic_phy_cap phy_cap; - u32 parity_check = 0; - u32 parity_count = 0; - u32 llctl, link_rate; - u32 clksm_value = 0; - - sci_phy->link_layer_registers = link_layer_registers; - - /* Set our IDENTIFY frame data */ - #define SCI_END_DEVICE 0x01 - - writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | - SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | - SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), - &sci_phy->link_layer_registers->transmit_identification); - - /* Write the device SAS Address */ - writel(0xFEDCBA98, - &sci_phy->link_layer_registers->sas_device_name_high); - writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); - - /* Write the source SAS Address */ - writel(phy_oem->sas_address.high, - &sci_phy->link_layer_registers->source_sas_address_high); - writel(phy_oem->sas_address.low, - &sci_phy->link_layer_registers->source_sas_address_low); - - /* Clear and Set the PHY Identifier */ - writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id); - writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), - &sci_phy->link_layer_registers->identify_frame_phy_id); - - /* Change the initial state of the phy configuration register */ - phy_configuration = - readl(&sci_phy->link_layer_registers->phy_configuration); - - /* Hold OOB state machine in reset */ - phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(phy_configuration, - &sci_phy->link_layer_registers->phy_configuration); - - /* Configure the SNW capabilities */ - phy_cap.all = 0; - phy_cap.start = 1; - phy_cap.gen3_no_ssc = 1; - phy_cap.gen2_no_ssc = 1; - phy_cap.gen1_no_ssc = 1; - if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { - phy_cap.gen3_ssc = 1; - phy_cap.gen2_ssc = 1; - phy_cap.gen1_ssc = 1; - } - - /* - * The SAS specification indicates that the phy_capabilities that - * are transmitted shall have an even parity. Calculate the parity. */ - parity_check = phy_cap.all; - while (parity_check != 0) { - if (parity_check & 0x1) - parity_count++; - parity_check >>= 1; - } - - /* - * If parity indicates there are an odd number of bits set, then - * set the parity bit to 1 in the phy capabilities. */ - if ((parity_count % 2) != 0) - phy_cap.parity = 1; - - writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities); - - /* Set the enable spinup period but disable the ability to send - * notify enable spinup - */ - writel(SCU_ENSPINUP_GEN_VAL(COUNT, - phy_user->notify_enable_spin_up_insertion_frequency), - &sci_phy->link_layer_registers->notify_enable_spinup_control); - - /* Write the ALIGN Insertion Ferequency for connected phy and - * inpendent of connected state - */ - clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, - phy_user->in_connection_align_insertion_frequency); - - clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, - phy_user->align_insertion_frequency); - - writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management); - - /* @todo Provide a way to write this register correctly */ - writel(0x02108421, - &sci_phy->link_layer_registers->afe_lookup_table_control); - - llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, - (u8)scic->user_parameters.sds1.no_outbound_task_timeout); - - switch(phy_user->max_speed_generation) { - case SCIC_SDS_PARM_GEN3_SPEED: - link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; - break; - case SCIC_SDS_PARM_GEN2_SPEED: - link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; - break; - default: - link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; - break; - } - llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); - writel(llctl, &sci_phy->link_layer_registers->link_layer_control); - - if (is_a0() || is_a2()) { - /* Program the max ARB time for the PHY to 700us so we inter-operate with - * the PMC expander which shuts down PHYs if the expander PHY generates too - * many breaks. This time value will guarantee that the initiator PHY will - * generate the break. - */ - writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, - &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); - } - - /* - * Set the link layer hang detection to 500ms (0x1F4) from its default - * value of 128ms. Max value is 511 ms. - */ - writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); - - /* We can exit the initial state to the stopped state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -/** - * This function will handle the sata SIGNATURE FIS timeout condition. It will - * restart the starting substate machine since we dont know what has actually - * happening. - */ -static void scic_sds_phy_sata_timeout(void *phy) -{ - struct scic_sds_phy *sci_phy = phy; - - dev_dbg(sciphy_to_dev(sci_phy), - "%s: SCIC SDS Phy 0x%p did not receive signature fis before " - "timeout.\n", - __func__, - sci_phy); - - sci_base_state_machine_stop(&sci_phy->starting_substate_machine); - - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); -} - -/** - * This method returns the port currently containing this phy. If the phy is - * currently contained by the dummy port, then the phy is considered to not - * be part of a port. - * @sci_phy: This parameter specifies the phy for which to retrieve the - * containing port. - * - * This method returns a handle to a port that contains the supplied phy. - * NULL This value is returned if the phy is not part of a real - * port (i.e. it's contained in the dummy port). !NULL All other - * values indicate a handle/pointer to the port containing the phy. - */ -struct scic_sds_port *scic_sds_phy_get_port( - struct scic_sds_phy *sci_phy) -{ - if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT) - return NULL; - - return sci_phy->owning_port; -} - -/** - * This method will assign a port to the phy object. - * @out]: sci_phy This parameter specifies the phy for which to assign a port - * object. - * - * - */ -void scic_sds_phy_set_port( - struct scic_sds_phy *sci_phy, - struct scic_sds_port *sci_port) -{ - sci_phy->owning_port = sci_port; - - if (sci_phy->bcn_received_while_port_unassigned) { - sci_phy->bcn_received_while_port_unassigned = false; - scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); - } -} - -/** - * This method will initialize the constructed phy - * @sci_phy: - * @link_layer_registers: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_initialize( - struct scic_sds_phy *sci_phy, - struct scu_transport_layer_registers __iomem *transport_layer_registers, - struct scu_link_layer_registers __iomem *link_layer_registers) -{ - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = scic_to_ihost(scic); - - /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = - isci_timer_create( - ihost, - sci_phy, - scic_sds_phy_sata_timeout); - - /* Perfrom the initialization of the TL hardware */ - scic_sds_phy_transport_layer_initialization( - sci_phy, - transport_layer_registers); - - /* Perofrm the initialization of the PE hardware */ - scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); - - /* - * There is nothing that needs to be done in this state just - * transition to the stopped state. */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -/** - * This method assigns the direct attached device ID for this phy. - * - * @sci_phy The phy for which the direct attached device id is to - * be assigned. - * @device_id The direct attached device ID to assign to the phy. - * This will either be the RNi for the device or an invalid RNi if there - * is no current device assigned to the phy. - */ -void scic_sds_phy_setup_transport( - struct scic_sds_phy *sci_phy, - u32 device_id) -{ - u32 tl_control; - - writel(device_id, &sci_phy->transport_layer_registers->stp_rni); - - /* - * The read should guarantee that the first write gets posted - * before the next write - */ - tl_control = readl(&sci_phy->transport_layer_registers->control); - tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); - writel(tl_control, &sci_phy->transport_layer_registers->control); -} - -/** - * - * @sci_phy: The phy object to be suspended. - * - * This function will perform the register reads/writes to suspend the SCU - * hardware protocol engine. none - */ -static void scic_sds_phy_suspend( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - scic_sds_phy_setup_transport( - sci_phy, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); -} - -void scic_sds_phy_resume(struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); -} - -void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy, - struct sci_sas_address *sas_address) -{ - sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high); - sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low); -} - -void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, - struct sci_sas_address *sas_address) -{ - struct sas_identify_frame *iaf; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - iaf = &iphy->frame_rcvd.iaf; - memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); -} - -void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, - struct scic_phy_proto *protocols) -{ - protocols->all = - (u16)(readl(&sci_phy-> - link_layer_registers->transmit_identification) & - 0x0000FFFF); -} - -/** - * This method will attempt to start the phy object. This request is only valid - * when the phy is in the stopped state - * @sci_phy: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) -{ - return sci_phy->state_handlers->start_handler(sci_phy); -} - -/** - * This method will attempt to stop the phy object. - * @sci_phy: - * - * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE - * if the phy is not in a valid state to stop - */ -enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) -{ - return sci_phy->state_handlers->stop_handler(sci_phy); -} - -/** - * This method will attempt to reset the phy. This request is only valid when - * the phy is in an ready state - * @sci_phy: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_reset( - struct scic_sds_phy *sci_phy) -{ - return sci_phy->state_handlers->reset_handler(sci_phy); -} - -/** - * This method will process the event code received. - * @sci_phy: - * @event_code: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - return sci_phy->state_handlers->event_handler(sci_phy, event_code); -} - -/** - * This method will process the frame index received. - * @sci_phy: - * @frame_index: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_frame_handler( - struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - return sci_phy->state_handlers->frame_handler(sci_phy, frame_index); -} - -/** - * This method will give the phy permission to consume power - * @sci_phy: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_consume_power_handler( - struct scic_sds_phy *sci_phy) -{ - return sci_phy->state_handlers->consume_power_handler(sci_phy); -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY HELPER FUNCTIONS - * ***************************************************************************** */ - - -/** - * - * @sci_phy: The phy object that received SAS PHY DETECTED. - * - * This method continues the link training for the phy as if it were a SAS PHY - * instead of a SATA PHY. This is done because the completion queue had a SAS - * PHY DETECTED event when the state machine was expecting a SATA PHY event. - * none - */ -static void scic_sds_phy_start_sas_link_training( - struct scic_sds_phy *sci_phy) -{ - u32 phy_control; - - phy_control = - readl(&sci_phy->link_layer_registers->phy_configuration); - phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); - writel(phy_control, - &sci_phy->link_layer_registers->phy_configuration); - - sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN - ); - - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; -} - -/** - * - * @sci_phy: The phy object that received a SATA SPINUP HOLD event - * - * This method continues the link training for the phy as if it were a SATA PHY - * instead of a SAS PHY. This is done because the completion queue had a SATA - * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none - */ -static void scic_sds_phy_start_sata_link_training( - struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER - ); - - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; -} - -/** - * scic_sds_phy_complete_link_training - perform processing common to - * all protocols upon completion of link training. - * @sci_phy: This parameter specifies the phy object for which link training - * has completed. - * @max_link_rate: This parameter specifies the maximum link rate to be - * associated with this phy. - * @next_state: This parameter specifies the next state for the phy's starting - * sub-state machine. - * - */ -static void scic_sds_phy_complete_link_training( - struct scic_sds_phy *sci_phy, - enum sas_linkrate max_link_rate, - u32 next_state) -{ - sci_phy->max_negotiated_speed = max_link_rate; - - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - next_state); -} - -static void scic_sds_phy_restart_starting_state( - struct scic_sds_phy *sci_phy) -{ - /* Stop the current substate machine */ - sci_base_state_machine_stop(&sci_phy->starting_substate_machine); - - /* Re-enter the base state machine starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); -} - -/* **************************************************************************** - * SCIC SDS PHY general handlers - ************************************************************************** */ -static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( - struct scic_sds_phy *phy) -{ - sci_base_state_machine_stop(&phy->starting_substate_machine); - - sci_base_state_machine_change_state(&phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY EVENT_HANDLERS - * ***************************************************************************** */ - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - - * decode the event - sas phy detected causes a state transition to the wait - * for speed event notification. - any other events log a warning message and - * set a failure status enum sci_status SCI_SUCCESS on any valid event notification - * SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - scic_sds_phy_start_sas_link_training(sci_phy); - sci_phy->is_in_link_training = true; - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - scic_sds_phy_start_sata_link_training(sci_phy); - sci_phy->is_in_link_training = true; - break; - - default: - dev_dbg(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - - * decode the event - sas phy detected returns us back to this state. - speed - * event detected causes a state transition to the wait for iaf. - identify - * timeout is an un-expected event and the state machine is restarted. - link - * failure events restart the starting state machine - any other events log a - * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid - * event notification SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * Why is this being reported again by the controller? - * We would re-enter this state so just stay here */ - break; - - case SCU_EVENT_SAS_15: - case SCU_EVENT_SAS_15_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SAS_30: - case SCU_EVENT_SAS_30_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SAS_60: - case SCU_EVENT_SAS_60_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* - * We were doing SAS PHY link training and received a SATA PHY event - * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(sci_phy); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - - * decode the event - sas phy detected event backs up the state machine to the - * await speed notification. - identify timeout is an un-expected event and the - * state machine is restarted. - link failure events restart the starting state - * machine - any other events log a warning message and set a failure status - * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any - * unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - /* Backup the state machine */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* - * We were doing SAS PHY link training and received a SATA PHY event - * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(sci_phy); - break; - - case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: - case SCU_EVENT_LINK_FAILURE: - case SCU_EVENT_HARD_RESET_RECEIVED: - /* Start the oob/sn state machine over again */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. - - * decode the event - link failure events restart the starting state machine - - * any other events log a warning message and set a failure status enum sci_status - * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event - * notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received unexpected " - "event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - - * decode the event - link failure events restart the starting state machine - - * sata spinup hold events are ignored since they are expected - any other - * events log a warning message and set a failure status enum sci_status SCI_SUCCESS - * on a link failure event SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* These events are received every 10ms and are expected while in this state */ - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * scic_sds_phy_starting_substate_await_sata_phy_event_handler - - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - - * decode the event - link failure events restart the starting state machine - - * sata spinup hold events are ignored since they are expected - sata phy - * detected event change to the wait speed event - any other events log a - * warning message and set a failure status enum sci_status SCI_SUCCESS on a link - * failure event SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler( - struct scic_sds_phy *sci_phy, u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* These events might be received since we dont know how many may be in - * the completion queue while waiting for power - */ - break; - - case SCU_EVENT_SATA_PHY_DETECTED: - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; - - /* We have received the SATA PHY notification change state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. - */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - * - decode the event - sata phy detected returns us back to this state. - - * speed event detected causes a state transition to the wait for signature. - - * link failure events restart the starting state machine - any other events - * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any - * valid event notification SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SATA_PHY_DETECTED: - /* - * The hardware reports multiple SATA PHY detected events - * ignore the extras */ - break; - - case SCU_EVENT_SATA_15: - case SCU_EVENT_SATA_15_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_SATA_30: - case SCU_EVENT_SATA_30_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_SATA_60: - case SCU_EVENT_SATA_60_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * scic_sds_phy_starting_substate_await_sig_fis_event_handler - - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - - * decode the event - sas phy detected event backs up the state machine to the - * await speed notification. - identify timeout is an un-expected event and the - * state machine is restarted. - link failure events restart the starting state - * machine - any other events log a warning message and set a failure status - * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any - * unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler( - struct scic_sds_phy *sci_phy, u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SATA_PHY_DETECTED: - /* Backup the state machine */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - - -/* - * ***************************************************************************** - * * SCIC SDS PHY FRAME_HANDLERS - * ***************************************************************************** */ - -/** - * - * @phy: This is struct scic_sds_phy object which is being requested to decode the - * frame data. - * @frame_index: This is the index of the unsolicited frame which was received - * for this phy. - * - * This method decodes the unsolicited frame when the struct scic_sds_phy is in the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF - * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change - * starting substate to wait power. - else - log warning message of unexpected - * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler( - struct scic_sds_phy *sci_phy, u32 frame_index) -{ - enum sci_status result; - u32 *frame_words; - struct sas_identify_frame iaf; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&frame_words); - - if (result != SCI_SUCCESS) - return result; - - sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); - if (iaf.frame_type == 0) { - u32 state; - - memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); - if (iaf.smp_tport) { - /* We got the IAF for an expander PHY go to the final - * state since there are no power requirements for - * expander phys. - */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; - } else { - /* We got the IAF we can now go to the await spinup - * semaphore state - */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; - } - sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, - state); - result = SCI_SUCCESS; - } else - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected frame id %x\n", - __func__, - frame_index); - - scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), - frame_index); - - return result; -} - -/** - * - * @phy: This is struct scic_sds_phy object which is being requested to decode the - * frame data. - * @frame_index: This is the index of the unsolicited frame which was received - * for this phy. - * - * This method decodes the unsolicited frame when the struct scic_sds_phy is in the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If - * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS - * data buffer. - else - log warning message of unexpected unsolicted frame - - * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS - * data - */ -static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler( - struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - enum sci_status result; - struct dev_to_host_fis *frame_header; - u32 *fis_frame_data; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&frame_header); - - if (result != SCI_SUCCESS) - return result; - - if ((frame_header->fis_type == FIS_REGD2H) && - !(frame_header->status & ATA_BUSY)) { - scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&fis_frame_data); - - scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, - frame_header, - fis_frame_data); - - /* got IAF we can now go to the await spinup semaphore state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - result = SCI_SUCCESS; - } else - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected frame id %x\n", - __func__, - frame_index); - - /* Regardless of the result we are done with this frame with it */ - scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), - frame_index); - - return result; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY POWER_HANDLERS - * ***************************************************************************** */ - -/* - * This method is called by the struct scic_sds_controller when the phy object is - * granted power. - The notify enable spinups are turned on for this phy object - * - The phy state machine is transitioned to the - * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler( - struct scic_sds_phy *sci_phy) -{ - u32 enable_spinup; - - enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); - enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); - writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); - - /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - return SCI_SUCCESS; -} - -/* - * This method is called by the struct scic_sds_controller when the phy object is - * granted power. - The phy state machine is transitioned to the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - /* Release the spinup hold state and reset the OOB state machine */ - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value &= - ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Now restart the OOB operation */ - scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); - - return SCI_SUCCESS; -} - -static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, - const char *func) -{ - dev_dbg(sciphy_to_dev(sci_phy), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&sci_phy->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status -scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - - default_phy_handler(sci_phy, __func__); - scic_sds_controller_release_frame(scic, frame_index); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status -scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status -scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - - - -static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { - [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, - .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, - .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, - .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - } -}; - -/** - * scic_sds_phy_set_starting_substate_handlers() - - * - * This macro sets the starting substate handlers by state_id - */ -#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \ - scic_sds_phy_set_state_handlers(\ - (phy), \ - &scic_sds_phy_starting_substate_handler_table[(state_id)] \ - ) - -/* - * **************************************************************************** - * * PHY STARTING SUBSTATE METHODS - * **************************************************************************** */ - -/** - * scic_sds_phy_starting_initial_substate_enter - - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state - * handlers are put in place for the struct scic_sds_phy object. - The state is - * changed to the wait phy type event notification. none - */ -static void scic_sds_phy_starting_initial_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); - - /* This is just an temporary state go off to the starting state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the - * struct scic_sds_phy object state handlers for this state. - Add this phy object to - * the power control queue none - */ -static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER - ); - - scic_sds_controller_power_control_queue_insert( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the - * struct scic_sds_phy object from the power control queue. none - */ -static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_controller_power_control_queue_remove( - scic_sds_phy_get_controller(sci_phy), sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the - * struct scic_sds_phy object state handlers for this state. - Add this phy object to - * the power control queue none - */ -static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER - ); - - scic_sds_controller_power_control_queue_insert( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the - * struct scic_sds_phy object from the power control queue. none - */ -static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_controller_power_control_queue_remove( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); - - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy - * on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer - * that was started on entry to await sata phy event notification none - */ -static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - isci_timer_stop(sci_phy->sata_timeout_timer); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the - * struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer - * that was started on entry to await sata phy event notification none - */ -static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - isci_timer_stop(sci_phy->sata_timeout_timer); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the - * struct scic_sds_phy object state handlers for this state. - * - Start the SIGNATURE FIS - * timeout timer none - */ -static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) -{ - bool continue_to_ready_state; - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - - continue_to_ready_state = scic_sds_port_link_detected( - sci_phy->owning_port, - sci_phy); - - if (continue_to_ready_state) { - /* - * Clear the PE suspend condition so we can actually - * receive SIG FIS - * The hardware will not respond to the XRDY until the PE - * suspend condition is cleared. - */ - scic_sds_phy_resume(sci_phy); - - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SIGNATURE_FIS_TIMEOUT); - } else - sci_phy->is_in_link_training = false; -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the - * struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE - * FIS timeout timer. none - */ -static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - isci_timer_stop(sci_phy->sata_timeout_timer); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy - * object state handlers for this state. - Change base state machine to the - * ready state. none - */ -static void scic_sds_phy_starting_final_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_starting_substate_handlers(sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - /* State machine has run to completion so exit out and change - * the base state machine to the ready state - */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_READY); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_phy_starting_substates[] = { - [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .enter_state = scic_sds_phy_starting_initial_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, - .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, - .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .enter_state = scic_sds_phy_starting_final_substate_enter, - } -}; - -/* - * This method takes the struct scic_sds_phy from a stopped state and - * attempts to start it. - The phy state machine is transitioned to the - * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS - */ -static enum sci_status -scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) -{ - struct isci_host *ihost; - struct scic_sds_controller *scic; - - scic = scic_sds_phy_get_controller(sci_phy), - ihost = scic_to_ihost(scic); - - /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, - scic_sds_phy_sata_timeout); - - if (sci_phy->sata_timeout_timer) - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) -{ - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_RESETTING); - - return SCI_SUCCESS; -} - -/** - * scic_sds_phy_ready_state_event_handler - - * @phy: This is the struct scic_sds_phy object which has received the event. - * - * This method request the struct scic_sds_phy handle the received event. The only - * event that we are interested in while in the ready state is the link failure - * event. - decoded event is a link failure - transition the struct scic_sds_phy back - * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will - * report a warning message enum sci_status SCI_SUCCESS if the event received is a - * link failure SCI_FAILURE_INVALID_STATE for any other event received. - */ -static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - enum sci_status result = SCI_FAILURE; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - result = SCI_SUCCESS; - break; - - case SCU_EVENT_BROADCAST_CHANGE: - /* Broadcast change received. Notify the port. */ - if (scic_sds_phy_get_port(sci_phy) != NULL) - scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); - else - sci_phy->bcn_received_while_port_unassigned = true; - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%sP SCIC PHY 0x%p ready state machine received " - "unexpected event_code %x\n", - __func__, sci_phy, event_code); - - result = SCI_FAILURE_INVALID_STATE; - break; - } - - return result; -} - -static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - enum sci_status result = SCI_FAILURE; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_HARD_RESET_TRANSMITTED: - /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - result = SCI_SUCCESS; - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: SCIC PHY 0x%p resetting state machine received " - "unexpected event_code %x\n", - __func__, sci_phy, event_code); - - result = SCI_FAILURE_INVALID_STATE; - break; - } - - return result; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { - [SCI_BASE_PHY_STATE_INITIAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_STOPPED] = { - .start_handler = scic_sds_phy_stopped_state_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_STARTING] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_READY] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_ready_state_stop_handler, - .reset_handler = scic_sds_phy_ready_state_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_ready_state_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_RESETTING] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_resetting_state_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_FINAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - } -}; - -/* - * **************************************************************************** - * * PHY STATE PRIVATE METHODS - * **************************************************************************** */ - -/** - * - * @sci_phy: This is the struct scic_sds_phy object to stop. - * - * This method will stop the struct scic_sds_phy object. This does not reset the - * protocol engine it just suspends it and places it in a state where it will - * not cause the end device to power up. none - */ -static void scu_link_layer_stop_protocol_engine( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - u32 enable_spinup_value; - - /* Suspend the protocol engine and place it in a sata spinup hold state */ - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= - (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | - SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | - SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Disable the notify enable spinup primitives */ - enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); - enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); - writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control); -} - -/** - * - * - * This method will start the OOB/SN state machine for this struct scic_sds_phy object. - */ -static void scu_link_layer_start_oob( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - scu_sas_pcfg_value &= - ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | - SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); -} - -/** - * - * - * This method will transmit a hard reset request on the specified phy. The SCU - * hardware requires that we reset the OOB state machine and set the hard reset - * bit in the phy configuration register. We then must start OOB over with the - * hard reset bit set. - */ -static void scu_link_layer_tx_hard_reset( - struct scic_sds_phy *sci_phy) -{ - u32 phy_configuration_value; - - /* - * SAS Phys must wait for the HARD_RESET_TX event notification to transition - * to the starting state. */ - phy_configuration_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - phy_configuration_value |= - (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | - SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); - writel(phy_configuration_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Now take the OOB state machine out of reset */ - phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(phy_configuration_value, - &sci_phy->link_layer_registers->phy_configuration); -} - -/* - * **************************************************************************** - * * PHY BASE STATE METHODS - * **************************************************************************** */ - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state - * handlers for the phy object base state machine initial state. none - */ -static void scic_sds_phy_initial_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state - * handlers for the phy object base state machine initial state. - The SCU - * hardware is requested to stop the protocol engine. none - */ -static void scic_sds_phy_stopped_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = scic_to_ihost(scic); - - /* - * @todo We need to get to the controller to place this PE in a - * reset state - */ - - scic_sds_phy_set_base_state_handlers(sci_phy, - SCI_BASE_PHY_STATE_STOPPED); - - if (sci_phy->sata_timeout_timer != NULL) { - isci_del_timer(ihost, sci_phy->sata_timeout_timer); - - sci_phy->sata_timeout_timer = NULL; - } - - scu_link_layer_stop_protocol_engine(sci_phy); - - if (sci_phy->state_machine.previous_state_id != - SCI_BASE_PHY_STATE_INITIAL) - scic_sds_controller_link_down( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state - * handlers for the phy object base state machine starting state. - The SCU - * hardware is requested to start OOB/SN on this protocl engine. - The phy - * starting substate machine is started. - If the previous state was the ready - * state then the struct scic_sds_controller is informed that the phy has gone link - * down. none - */ -static void scic_sds_phy_starting_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING); - - scu_link_layer_stop_protocol_engine(sci_phy); - scu_link_layer_start_oob(sci_phy); - - /* We don't know what kind of phy we are going to be just yet */ - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; - sci_phy->bcn_received_while_port_unassigned = false; - - /* Change over to the starting substate machine to continue */ - sci_base_state_machine_start(&sci_phy->starting_substate_machine); - - if (sci_phy->state_machine.previous_state_id - == SCI_BASE_PHY_STATE_READY) { - scic_sds_controller_link_down( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy - ); - } -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state - * handlers for the phy object base state machine ready state. - The SCU - * hardware protocol engine is resumed. - The struct scic_sds_controller is informed - * that the phy object has gone link up. none - */ -static void scic_sds_phy_ready_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY); - - scic_sds_controller_link_up( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware - * protocol engine represented by this struct scic_sds_phy object. none - */ -static void scic_sds_phy_ready_state_exit(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_suspend(sci_phy); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state - * handlers for the phy object base state machine resetting state. none - */ -static void scic_sds_phy_resetting_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING); - - /* - * The phy is being reset, therefore deactivate it from the port. - * In the resetting state we don't notify the user regarding - * link up and link down notifications. */ - scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false); - - if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - scu_link_layer_tx_hard_reset(sci_phy); - } else { - /* - * The SCU does not need to have a discrete reset state so - * just go back to the starting state. - */ - sci_base_state_machine_change_state( - &sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - } -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state - * handlers for the phy object base state machine final state. none - */ -static void scic_sds_phy_final_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL); - - /* Nothing to do here */ -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_phy_state_table[] = { - [SCI_BASE_PHY_STATE_INITIAL] = { - .enter_state = scic_sds_phy_initial_state_enter, - }, - [SCI_BASE_PHY_STATE_STOPPED] = { - .enter_state = scic_sds_phy_stopped_state_enter, - }, - [SCI_BASE_PHY_STATE_STARTING] = { - .enter_state = scic_sds_phy_starting_state_enter, - }, - [SCI_BASE_PHY_STATE_READY] = { - .enter_state = scic_sds_phy_ready_state_enter, - .exit_state = scic_sds_phy_ready_state_exit, - }, - [SCI_BASE_PHY_STATE_RESETTING] = { - .enter_state = scic_sds_phy_resetting_state_enter, - }, - [SCI_BASE_PHY_STATE_FINAL] = { - .enter_state = scic_sds_phy_final_state_enter, - }, -}; - -void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, - struct scic_sds_port *owning_port, u8 phy_index) -{ - sci_base_state_machine_construct(&sci_phy->state_machine, - sci_phy, - scic_sds_phy_state_table, - SCI_BASE_PHY_STATE_INITIAL); - - sci_base_state_machine_start(&sci_phy->state_machine); - - /* Copy the rest of the input data to our locals */ - sci_phy->owning_port = owning_port; - sci_phy->phy_index = phy_index; - sci_phy->bcn_received_while_port_unassigned = false; - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; - sci_phy->link_layer_registers = NULL; - sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; - sci_phy->sata_timeout_timer = NULL; - - /* Initialize the the substate machines */ - sci_base_state_machine_construct(&sci_phy->starting_substate_machine, - sci_phy, - scic_sds_phy_starting_substates, - SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); -} diff --git a/drivers/scsi/isci/core/scic_sds_phy.h b/drivers/scsi/isci/core/scic_sds_phy.h deleted file mode 100644 index 0d7bab3..0000000 --- a/drivers/scsi/isci/core/scic_sds_phy.h +++ /dev/null @@ -1,439 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PHY_H_ -#define _SCIC_SDS_PHY_H_ - -#include "sas.h" -#include "scic_phy.h" -#include "registers.h" -#include "state_machine.h" -#include - -struct scic_sds_port; -/** - * - * - * This is the timeout value for the SATA phy to wait for a SIGNATURE FIS - * before restarting the starting state machine. Technically, the old parallel - * ATA specification required up to 30 seconds for a device to issue its - * signature FIS as a result of a soft reset. Now we see that devices respond - * generally within 15 seconds, but we'll use 25 for now. - */ -#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000 - -/** - * - * - * This is the timeout for the SATA OOB/SN because the hardware does not - * recognize a hot plug after OOB signal but before the SN signals. We need to - * make sure after a hotplug timeout if we have not received the speed event - * notification from the hardware that we restart the hardware OOB state - * machine. - */ -#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 - -enum scic_sds_phy_states { - /** - * Simply the initial state for the base domain state machine. - */ - SCI_BASE_PHY_STATE_INITIAL, - - /** - * This state indicates that the phy has successfully been stopped. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the INITIAL state. - * This state is entered from the STARTING state. - * This state is entered from the READY state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_PHY_STATE_STOPPED, - - /** - * This state indicates that the phy is in the process of becomming - * ready. In this state no new IO operations are permitted on this phy. - * This state is entered from the STOPPED state. - * This state is entered from the READY state. - * This state is entered from the RESETTING state. - */ - SCI_BASE_PHY_STATE_STARTING, - - /** - * This state indicates the the phy is now ready. Thus, the user - * is able to perform IO operations utilizing this phy as long as it - * is currently part of a valid port. - * This state is entered from the STARTING state. - */ - SCI_BASE_PHY_STATE_READY, - - /** - * This state indicates that the phy is in the process of being reset. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the READY state. - */ - SCI_BASE_PHY_STATE_RESETTING, - - /** - * Simply the final state for the base phy state machine. - */ - SCI_BASE_PHY_STATE_FINAL, -}; - - -/** - * enum scic_sds_phy_starting_substates - - * - * - */ -enum scic_sds_phy_starting_substates { - /** - * Initial state - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL, - - /** - * Wait state for the hardware OSSP event type notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN, - - /** - * Wait state for the PHY speed notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN, - - /** - * Wait state for the IAF Unsolicited frame notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF, - - /** - * Wait state for the request to consume power - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER, - - /** - * Wait state for request to consume power - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER, - - /** - * Wait state for the SATA PHY notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN, - - /** - * Wait for the SATA PHY speed notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN, - - /** - * Wait state for the SIGNATURE FIS unsolicited frame notification - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF, - - /** - * Exit state for this state machine - */ - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL, -}; - -struct scic_sds_port; -struct scic_sds_controller; - -/** - * This enumeration provides a named phy type for the state machine - * - * - */ -enum scic_sds_phy_protocol { - /** - * This is an unknown phy type since there is either nothing on the other - * end or we have not detected the phy type as yet. - */ - SCIC_SDS_PHY_PROTOCOL_UNKNOWN, - - /** - * This is a SAS PHY - */ - SCIC_SDS_PHY_PROTOCOL_SAS, - - /** - * This is a SATA PHY - */ - SCIC_SDS_PHY_PROTOCOL_SATA, - - SCIC_SDS_MAX_PHY_PROTOCOLS -}; - -/** - * struct scic_sds_phy - This structure contains or references all of the data - * necessary to represent the core phy object and SCU harware protocol - * engine. - * - * - */ -struct scic_sds_phy { - /** - * This field contains the information for the base phy state machine. - */ - struct sci_base_state_machine state_machine; - - /** - * This field specifies the port object that owns/contains this phy. - */ - struct scic_sds_port *owning_port; - - /** - * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s, - * or 6.0 Gb/s operation. - */ - enum sas_linkrate max_negotiated_speed; - - /** - * This member specifies the protocol being utilized on this phy. This - * field contains a legitamite value once the PHY has link trained with - * a remote phy. - */ - enum scic_sds_phy_protocol protocol; - - /** - * This field specifies the index with which this phy is associated (0-3). - */ - u8 phy_index; - - /** - * This member indicates if this particular PHY has received a BCN while - * it had no port assignement. This BCN will be reported once the phy is - * assigned to a port. - */ - bool bcn_received_while_port_unassigned; - - /** - * This field indicates if this PHY is currently in the process of - * link training (i.e. it has started OOB, but has yet to perform - * IAF exchange/Signature FIS reception). - */ - bool is_in_link_training; - - /** - * This field contains a reference to the timer utilized in detecting - * when a signature FIS timeout has occurred. The signature FIS is the - * first FIS sent by an attached SATA device after OOB/SN. - */ - void *sata_timeout_timer; - - const struct scic_sds_phy_state_handler *state_handlers; - - struct sci_base_state_machine starting_substate_machine; - - /** - * This field is the pointer to the transport layer register for the SCU - * hardware. - */ - struct scu_transport_layer_registers __iomem *transport_layer_registers; - - /** - * This field points to the link layer register set within the SCU. - */ - struct scu_link_layer_registers __iomem *link_layer_registers; - -}; - -typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *); -typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32); -typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32); -typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); - -/** - * struct scic_sds_phy_state_handler - - * - * - */ -struct scic_sds_phy_state_handler { - /** - * The start_handler specifies the method invoked when there is an - * attempt to start a phy. - */ - scic_sds_phy_handler_t start_handler; - - /** - * The stop_handler specifies the method invoked when there is an - * attempt to stop a phy. - */ - scic_sds_phy_handler_t stop_handler; - - /** - * The reset_handler specifies the method invoked when there is an - * attempt to reset a phy. - */ - scic_sds_phy_handler_t reset_handler; - - /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a phy. - */ - scic_sds_phy_handler_t destruct_handler; - - /** - * The state handler for unsolicited frames received from the SCU hardware. - */ - scic_sds_phy_frame_handler_t frame_handler; - - /** - * The state handler for events received from the SCU hardware. - */ - scic_sds_phy_event_handler_t event_handler; - - /** - * The state handler for staggered spinup. - */ - scic_sds_phy_power_handler_t consume_power_handler; - -}; - -/** - * scic_sds_phy_get_index() - - * - * This macro returns the phy index for the specified phy - */ -#define scic_sds_phy_get_index(phy) \ - ((phy)->phy_index) - -/** - * scic_sds_phy_get_controller() - This macro returns the controller for this - * phy - * - * - */ -#define scic_sds_phy_get_controller(phy) \ - (scic_sds_port_get_controller((phy)->owning_port)) - -/** - * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for - * this phy object - * - * - */ -#define scic_sds_phy_set_state_handlers(phy, handlers) \ - ((phy)->state_handlers = (handlers)) - -/** - * scic_sds_phy_set_base_state_handlers() - - * - * This macro set the base state handlers for the phy object. - */ -#define scic_sds_phy_set_base_state_handlers(phy, state_id) \ - scic_sds_phy_set_state_handlers(\ - (phy), \ - &scic_sds_phy_state_handler_table[(state_id)] \ - ) - -void scic_sds_phy_construct( - struct scic_sds_phy *this_phy, - struct scic_sds_port *owning_port, - u8 phy_index); - -struct scic_sds_port *scic_sds_phy_get_port( - struct scic_sds_phy *this_phy); - -void scic_sds_phy_set_port( - struct scic_sds_phy *this_phy, - struct scic_sds_port *owning_port); - -enum sci_status scic_sds_phy_initialize( - struct scic_sds_phy *this_phy, - struct scu_transport_layer_registers __iomem *transport_layer_registers, - struct scu_link_layer_registers __iomem *link_layer_registers); - -enum sci_status scic_sds_phy_start( - struct scic_sds_phy *this_phy); - -enum sci_status scic_sds_phy_stop( - struct scic_sds_phy *this_phy); - -enum sci_status scic_sds_phy_reset( - struct scic_sds_phy *this_phy); - -void scic_sds_phy_resume( - struct scic_sds_phy *this_phy); - -void scic_sds_phy_setup_transport( - struct scic_sds_phy *this_phy, - u32 device_id); - -enum sci_status scic_sds_phy_event_handler( - struct scic_sds_phy *this_phy, - u32 event_code); - -enum sci_status scic_sds_phy_frame_handler( - struct scic_sds_phy *this_phy, - u32 frame_index); - -enum sci_status scic_sds_phy_consume_power_handler( - struct scic_sds_phy *this_phy); - -void scic_sds_phy_get_sas_address( - struct scic_sds_phy *this_phy, - struct sci_sas_address *sas_address); - -void scic_sds_phy_get_attached_sas_address( - struct scic_sds_phy *this_phy, - struct sci_sas_address *sas_address); - -void scic_sds_phy_get_protocols( - struct scic_sds_phy *sci_phy, - struct scic_phy_proto *protocols); - -#endif /* _SCIC_SDS_PHY_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index a9f3ce1..11b516a 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -54,9 +54,7 @@ */ #include "host.h" -#include "scic_phy.h" #include "scic_port.h" -#include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h index 56a40a7..7fd1617 100644 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h +++ b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h @@ -64,7 +64,6 @@ */ #include "scic_sds_port.h" -#include "scic_sds_phy.h" struct scic_sds_controller; struct scic_sds_port_configuration_agent; diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 1134395..b92d51f 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -56,12 +56,2219 @@ #include "isci.h" #include "host.h" #include "phy.h" +#include "scu_event_codes.h" #include "scic_port.h" #include "scic_config_parameters.h" +#include "timers.h" -struct scic_sds_phy; -extern enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy); -extern enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy); +/* Maximum arbitration wait time in micro-seconds */ +#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) + +enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) +{ + return sci_phy->max_negotiated_speed; +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY Internal Methods + * ***************************************************************************** */ + +/** + * This method will initialize the phy transport layer registers + * @sci_phy: + * @transport_layer_registers + * + * enum sci_status + */ +static enum sci_status scic_sds_phy_transport_layer_initialization( + struct scic_sds_phy *sci_phy, + struct scu_transport_layer_registers __iomem *transport_layer_registers) +{ + u32 tl_control; + + sci_phy->transport_layer_registers = transport_layer_registers; + + writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, + &sci_phy->transport_layer_registers->stp_rni); + + /* + * Hardware team recommends that we enable the STP prefetch for all + * transports + */ + tl_control = readl(&sci_phy->transport_layer_registers->control); + tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); + writel(tl_control, &sci_phy->transport_layer_registers->control); + + return SCI_SUCCESS; +} + +/** + * This method will initialize the phy link layer registers + * @sci_phy: + * @link_layer_registers: + * + * enum sci_status + */ +static enum sci_status +scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, + struct scu_link_layer_registers __iomem *link_layer_registers) +{ + struct scic_sds_controller *scic = + sci_phy->owning_port->owning_controller; + int phy_idx = sci_phy->phy_index; + struct sci_phy_user_params *phy_user = + &scic->user_parameters.sds1.phys[phy_idx]; + struct sci_phy_oem_params *phy_oem = + &scic->oem_parameters.sds1.phys[phy_idx]; + u32 phy_configuration; + struct scic_phy_cap phy_cap; + u32 parity_check = 0; + u32 parity_count = 0; + u32 llctl, link_rate; + u32 clksm_value = 0; + + sci_phy->link_layer_registers = link_layer_registers; + + /* Set our IDENTIFY frame data */ + #define SCI_END_DEVICE 0x01 + + writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | + SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), + &sci_phy->link_layer_registers->transmit_identification); + + /* Write the device SAS Address */ + writel(0xFEDCBA98, + &sci_phy->link_layer_registers->sas_device_name_high); + writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); + + /* Write the source SAS Address */ + writel(phy_oem->sas_address.high, + &sci_phy->link_layer_registers->source_sas_address_high); + writel(phy_oem->sas_address.low, + &sci_phy->link_layer_registers->source_sas_address_low); + + /* Clear and Set the PHY Identifier */ + writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), + &sci_phy->link_layer_registers->identify_frame_phy_id); + + /* Change the initial state of the phy configuration register */ + phy_configuration = + readl(&sci_phy->link_layer_registers->phy_configuration); + + /* Hold OOB state machine in reset */ + phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(phy_configuration, + &sci_phy->link_layer_registers->phy_configuration); + + /* Configure the SNW capabilities */ + phy_cap.all = 0; + phy_cap.start = 1; + phy_cap.gen3_no_ssc = 1; + phy_cap.gen2_no_ssc = 1; + phy_cap.gen1_no_ssc = 1; + if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { + phy_cap.gen3_ssc = 1; + phy_cap.gen2_ssc = 1; + phy_cap.gen1_ssc = 1; + } + + /* + * The SAS specification indicates that the phy_capabilities that + * are transmitted shall have an even parity. Calculate the parity. */ + parity_check = phy_cap.all; + while (parity_check != 0) { + if (parity_check & 0x1) + parity_count++; + parity_check >>= 1; + } + + /* + * If parity indicates there are an odd number of bits set, then + * set the parity bit to 1 in the phy capabilities. */ + if ((parity_count % 2) != 0) + phy_cap.parity = 1; + + writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities); + + /* Set the enable spinup period but disable the ability to send + * notify enable spinup + */ + writel(SCU_ENSPINUP_GEN_VAL(COUNT, + phy_user->notify_enable_spin_up_insertion_frequency), + &sci_phy->link_layer_registers->notify_enable_spinup_control); + + /* Write the ALIGN Insertion Ferequency for connected phy and + * inpendent of connected state + */ + clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, + phy_user->in_connection_align_insertion_frequency); + + clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, + phy_user->align_insertion_frequency); + + writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management); + + /* @todo Provide a way to write this register correctly */ + writel(0x02108421, + &sci_phy->link_layer_registers->afe_lookup_table_control); + + llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, + (u8)scic->user_parameters.sds1.no_outbound_task_timeout); + + switch(phy_user->max_speed_generation) { + case SCIC_SDS_PARM_GEN3_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; + break; + case SCIC_SDS_PARM_GEN2_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; + break; + default: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; + break; + } + llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); + writel(llctl, &sci_phy->link_layer_registers->link_layer_control); + + if (is_a0() || is_a2()) { + /* Program the max ARB time for the PHY to 700us so we inter-operate with + * the PMC expander which shuts down PHYs if the expander PHY generates too + * many breaks. This time value will guarantee that the initiator PHY will + * generate the break. + */ + writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, + &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); + } + + /* + * Set the link layer hang detection to 500ms (0x1F4) from its default + * value of 128ms. Max value is 511 ms. + */ + writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); + + /* We can exit the initial state to the stopped state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +/** + * This function will handle the sata SIGNATURE FIS timeout condition. It will + * restart the starting substate machine since we dont know what has actually + * happening. + */ +static void scic_sds_phy_sata_timeout(void *phy) +{ + struct scic_sds_phy *sci_phy = phy; + + dev_dbg(sciphy_to_dev(sci_phy), + "%s: SCIC SDS Phy 0x%p did not receive signature fis before " + "timeout.\n", + __func__, + sci_phy); + + sci_base_state_machine_stop(&sci_phy->starting_substate_machine); + + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); +} + +/** + * This method returns the port currently containing this phy. If the phy is + * currently contained by the dummy port, then the phy is considered to not + * be part of a port. + * @sci_phy: This parameter specifies the phy for which to retrieve the + * containing port. + * + * This method returns a handle to a port that contains the supplied phy. + * NULL This value is returned if the phy is not part of a real + * port (i.e. it's contained in the dummy port). !NULL All other + * values indicate a handle/pointer to the port containing the phy. + */ +struct scic_sds_port *scic_sds_phy_get_port( + struct scic_sds_phy *sci_phy) +{ + if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT) + return NULL; + + return sci_phy->owning_port; +} + +/** + * This method will assign a port to the phy object. + * @out]: sci_phy This parameter specifies the phy for which to assign a port + * object. + * + * + */ +void scic_sds_phy_set_port( + struct scic_sds_phy *sci_phy, + struct scic_sds_port *sci_port) +{ + sci_phy->owning_port = sci_port; + + if (sci_phy->bcn_received_while_port_unassigned) { + sci_phy->bcn_received_while_port_unassigned = false; + scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); + } +} + +/** + * This method will initialize the constructed phy + * @sci_phy: + * @link_layer_registers: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_initialize( + struct scic_sds_phy *sci_phy, + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers) +{ + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + struct isci_host *ihost = scic_to_ihost(scic); + + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_phy->sata_timeout_timer = + isci_timer_create( + ihost, + sci_phy, + scic_sds_phy_sata_timeout); + + /* Perfrom the initialization of the TL hardware */ + scic_sds_phy_transport_layer_initialization( + sci_phy, + transport_layer_registers); + + /* Perofrm the initialization of the PE hardware */ + scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); + + /* + * There is nothing that needs to be done in this state just + * transition to the stopped state. */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +/** + * This method assigns the direct attached device ID for this phy. + * + * @sci_phy The phy for which the direct attached device id is to + * be assigned. + * @device_id The direct attached device ID to assign to the phy. + * This will either be the RNi for the device or an invalid RNi if there + * is no current device assigned to the phy. + */ +void scic_sds_phy_setup_transport( + struct scic_sds_phy *sci_phy, + u32 device_id) +{ + u32 tl_control; + + writel(device_id, &sci_phy->transport_layer_registers->stp_rni); + + /* + * The read should guarantee that the first write gets posted + * before the next write + */ + tl_control = readl(&sci_phy->transport_layer_registers->control); + tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); + writel(tl_control, &sci_phy->transport_layer_registers->control); +} + +/** + * + * @sci_phy: The phy object to be suspended. + * + * This function will perform the register reads/writes to suspend the SCU + * hardware protocol engine. none + */ +static void scic_sds_phy_suspend( + struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + scic_sds_phy_setup_transport( + sci_phy, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); +} + +void scic_sds_phy_resume(struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); +} + +void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy, + struct sci_sas_address *sas_address) +{ + sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high); + sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low); +} + +void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, + struct sci_sas_address *sas_address) +{ + struct sas_identify_frame *iaf; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + iaf = &iphy->frame_rcvd.iaf; + memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); +} + +void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, + struct scic_phy_proto *protocols) +{ + protocols->all = + (u16)(readl(&sci_phy-> + link_layer_registers->transmit_identification) & + 0x0000FFFF); +} + +/** + * This method will attempt to start the phy object. This request is only valid + * when the phy is in the stopped state + * @sci_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) +{ + return sci_phy->state_handlers->start_handler(sci_phy); +} + +/** + * This method will attempt to stop the phy object. + * @sci_phy: + * + * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE + * if the phy is not in a valid state to stop + */ +enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) +{ + return sci_phy->state_handlers->stop_handler(sci_phy); +} + +/** + * This method will attempt to reset the phy. This request is only valid when + * the phy is in an ready state + * @sci_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_reset( + struct scic_sds_phy *sci_phy) +{ + return sci_phy->state_handlers->reset_handler(sci_phy); +} + +/** + * This method will process the event code received. + * @sci_phy: + * @event_code: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + return sci_phy->state_handlers->event_handler(sci_phy, event_code); +} + +/** + * This method will process the frame index received. + * @sci_phy: + * @frame_index: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_frame_handler( + struct scic_sds_phy *sci_phy, + u32 frame_index) +{ + return sci_phy->state_handlers->frame_handler(sci_phy, frame_index); +} + +/** + * This method will give the phy permission to consume power + * @sci_phy: + * + * enum sci_status + */ +enum sci_status scic_sds_phy_consume_power_handler( + struct scic_sds_phy *sci_phy) +{ + return sci_phy->state_handlers->consume_power_handler(sci_phy); +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY HELPER FUNCTIONS + * ***************************************************************************** */ + + +/** + * + * @sci_phy: The phy object that received SAS PHY DETECTED. + * + * This method continues the link training for the phy as if it were a SAS PHY + * instead of a SATA PHY. This is done because the completion queue had a SAS + * PHY DETECTED event when the state machine was expecting a SATA PHY event. + * none + */ +static void scic_sds_phy_start_sas_link_training( + struct scic_sds_phy *sci_phy) +{ + u32 phy_control; + + phy_control = + readl(&sci_phy->link_layer_registers->phy_configuration); + phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); + writel(phy_control, + &sci_phy->link_layer_registers->phy_configuration); + + sci_base_state_machine_change_state( + &sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN + ); + + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; +} + +/** + * + * @sci_phy: The phy object that received a SATA SPINUP HOLD event + * + * This method continues the link training for the phy as if it were a SATA PHY + * instead of a SAS PHY. This is done because the completion queue had a SATA + * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none + */ +static void scic_sds_phy_start_sata_link_training( + struct scic_sds_phy *sci_phy) +{ + sci_base_state_machine_change_state( + &sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER + ); + + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; +} + +/** + * scic_sds_phy_complete_link_training - perform processing common to + * all protocols upon completion of link training. + * @sci_phy: This parameter specifies the phy object for which link training + * has completed. + * @max_link_rate: This parameter specifies the maximum link rate to be + * associated with this phy. + * @next_state: This parameter specifies the next state for the phy's starting + * sub-state machine. + * + */ +static void scic_sds_phy_complete_link_training( + struct scic_sds_phy *sci_phy, + enum sas_linkrate max_link_rate, + u32 next_state) +{ + sci_phy->max_negotiated_speed = max_link_rate; + + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + next_state); +} + +static void scic_sds_phy_restart_starting_state( + struct scic_sds_phy *sci_phy) +{ + /* Stop the current substate machine */ + sci_base_state_machine_stop(&sci_phy->starting_substate_machine); + + /* Re-enter the base state machine starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); +} + +/* **************************************************************************** + * SCIC SDS PHY general handlers + ************************************************************************** */ +static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( + struct scic_sds_phy *phy) +{ + sci_base_state_machine_stop(&phy->starting_substate_machine); + + sci_base_state_machine_change_state(&phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY EVENT_HANDLERS + * ***************************************************************************** */ + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - + * decode the event - sas phy detected causes a state transition to the wait + * for speed event notification. - any other events log a warning message and + * set a failure status enum sci_status SCI_SUCCESS on any valid event notification + * SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + scic_sds_phy_start_sas_link_training(sci_phy); + sci_phy->is_in_link_training = true; + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + scic_sds_phy_start_sata_link_training(sci_phy); + sci_phy->is_in_link_training = true; + break; + + default: + dev_dbg(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - + * decode the event - sas phy detected returns us back to this state. - speed + * event detected causes a state transition to the wait for iaf. - identify + * timeout is an un-expected event and the state machine is restarted. - link + * failure events restart the starting state machine - any other events log a + * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid + * event notification SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * Why is this being reported again by the controller? + * We would re-enter this state so just stay here */ + break; + + case SCU_EVENT_SAS_15: + case SCU_EVENT_SAS_15_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_1_5_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + + case SCU_EVENT_SAS_30: + case SCU_EVENT_SAS_30_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_3_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + + case SCU_EVENT_SAS_60: + case SCU_EVENT_SAS_60_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_6_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + scic_sds_phy_start_sata_link_training(sci_phy); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - + * decode the event - sas phy detected event backs up the state machine to the + * await speed notification. - identify timeout is an un-expected event and the + * state machine is restarted. - link failure events restart the starting state + * machine - any other events log a warning message and set a failure status + * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any + * unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* Backup the state machine */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + scic_sds_phy_start_sata_link_training(sci_phy); + break; + + case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: + case SCU_EVENT_LINK_FAILURE: + case SCU_EVENT_HARD_RESET_RECEIVED: + /* Start the oob/sn state machine over again */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. - + * decode the event - link failure events restart the starting state machine - + * any other events log a warning message and set a failure status enum sci_status + * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event + * notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received unexpected " + "event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - + * decode the event - link failure events restart the starting state machine - + * sata spinup hold events are ignored since they are expected - any other + * events log a warning message and set a failure status enum sci_status SCI_SUCCESS + * on a link failure event SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events are received every 10ms and are expected while in this state */ + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * scic_sds_phy_starting_substate_await_sata_phy_event_handler - + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - + * decode the event - link failure events restart the starting state machine - + * sata spinup hold events are ignored since they are expected - sata phy + * detected event change to the wait speed event - any other events log a + * warning message and set a failure status enum sci_status SCI_SUCCESS on a link + * failure event SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler( + struct scic_sds_phy *sci_phy, u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events might be received since we dont know how many may be in + * the completion queue while waiting for power + */ + break; + + case SCU_EVENT_SATA_PHY_DETECTED: + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + + /* We have received the SATA PHY notification change state */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. + * - decode the event - sata phy detected returns us back to this state. - + * speed event detected causes a state transition to the wait for signature. - + * link failure events restart the starting state machine - any other events + * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any + * valid event notification SCI_FAILURE on any unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler( + struct scic_sds_phy *sci_phy, + u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* + * The hardware reports multiple SATA PHY detected events + * ignore the extras */ + break; + + case SCU_EVENT_SATA_15: + case SCU_EVENT_SATA_15_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_1_5_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + + case SCU_EVENT_SATA_30: + case SCU_EVENT_SATA_30_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_3_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + + case SCU_EVENT_SATA_60: + case SCU_EVENT_SATA_60_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_6_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + +/** + * scic_sds_phy_starting_substate_await_sig_fis_event_handler - + * @phy: This struct scic_sds_phy object which has received an event. + * @event_code: This is the event code which the phy object is to decode. + * + * This method is called when an event notification is received for the phy + * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - + * decode the event - sas phy detected event backs up the state machine to the + * await speed notification. - identify timeout is an un-expected event and the + * state machine is restarted. - link failure events restart the starting state + * machine - any other events log a warning message and set a failure status + * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any + * unexpected event notifation + */ +static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler( + struct scic_sds_phy *sci_phy, u32 event_code) +{ + u32 result = SCI_SUCCESS; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* Backup the state machine */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + scic_sds_phy_restart_starting_state(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + result = SCI_FAILURE; + break; + } + + return result; +} + + +/* + * ***************************************************************************** + * * SCIC SDS PHY FRAME_HANDLERS + * ***************************************************************************** */ + +/** + * + * @phy: This is struct scic_sds_phy object which is being requested to decode the + * frame data. + * @frame_index: This is the index of the unsolicited frame which was received + * for this phy. + * + * This method decodes the unsolicited frame when the struct scic_sds_phy is in the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF + * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change + * starting substate to wait power. - else - log warning message of unexpected + * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler( + struct scic_sds_phy *sci_phy, u32 frame_index) +{ + enum sci_status result; + u32 *frame_words; + struct sas_identify_frame iaf; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_phy_get_controller(sci_phy)->uf_control), + frame_index, + (void **)&frame_words); + + if (result != SCI_SUCCESS) + return result; + + sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); + if (iaf.frame_type == 0) { + u32 state; + + memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); + if (iaf.smp_tport) { + /* We got the IAF for an expander PHY go to the final + * state since there are no power requirements for + * expander phys. + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; + } else { + /* We got the IAF we can now go to the await spinup + * semaphore state + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; + } + sci_base_state_machine_change_state( + &sci_phy->starting_substate_machine, + state); + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, + frame_index); + + scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), + frame_index); + + return result; +} + +/** + * + * @phy: This is struct scic_sds_phy object which is being requested to decode the + * frame data. + * @frame_index: This is the index of the unsolicited frame which was received + * for this phy. + * + * This method decodes the unsolicited frame when the struct scic_sds_phy is in the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If + * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS + * data buffer. - else - log warning message of unexpected unsolicted frame - + * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS + * data + */ +static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler( + struct scic_sds_phy *sci_phy, + u32 frame_index) +{ + enum sci_status result; + struct dev_to_host_fis *frame_header; + u32 *fis_frame_data; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_phy_get_controller(sci_phy)->uf_control), + frame_index, + (void **)&frame_header); + + if (result != SCI_SUCCESS) + return result; + + if ((frame_header->fis_type == FIS_REGD2H) && + !(frame_header->status & ATA_BUSY)) { + scic_sds_unsolicited_frame_control_get_buffer( + &(scic_sds_phy_get_controller(sci_phy)->uf_control), + frame_index, + (void **)&fis_frame_data); + + scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, + frame_header, + fis_frame_data); + + /* got IAF we can now go to the await spinup semaphore state */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, + frame_index); + + /* Regardless of the result we are done with this frame with it */ + scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), + frame_index); + + return result; +} + +/* + * ***************************************************************************** + * * SCIC SDS PHY POWER_HANDLERS + * ***************************************************************************** */ + +/* + * This method is called by the struct scic_sds_controller when the phy object is + * granted power. - The notify enable spinups are turned on for this phy object + * - The phy state machine is transitioned to the + * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler( + struct scic_sds_phy *sci_phy) +{ + u32 enable_spinup; + + enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); + enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); + + /* Change state to the final state this substate machine has run to completion */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + return SCI_SUCCESS; +} + +/* + * This method is called by the struct scic_sds_controller when the phy object is + * granted power. - The phy state machine is transitioned to the + * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler( + struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + + /* Release the spinup hold state and reset the OOB state machine */ + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Now restart the OOB operation */ + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Change state to the final state this substate machine has run to completion */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); + + return SCI_SUCCESS; +} + +static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, + const char *func) +{ + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&sci_phy->state_machine)); + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status +scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, + u32 frame_index) +{ + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + + default_phy_handler(sci_phy, __func__); + scic_sds_controller_release_frame(scic, frame_index); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status +scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + return default_phy_handler(sci_phy, __func__); +} + +static enum sci_status +scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) +{ + return default_phy_handler(sci_phy, __func__); +} + + + +static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { + [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, + .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, + .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, + .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + } +}; + +/** + * scic_sds_phy_set_starting_substate_handlers() - + * + * This macro sets the starting substate handlers by state_id + */ +#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \ + scic_sds_phy_set_state_handlers(\ + (phy), \ + &scic_sds_phy_starting_substate_handler_table[(state_id)] \ + ) + +/* + * **************************************************************************** + * * PHY STARTING SUBSTATE METHODS + * **************************************************************************** */ + +/** + * scic_sds_phy_starting_initial_substate_enter - + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state + * handlers are put in place for the struct scic_sds_phy object. - The state is + * changed to the wait phy type event notification. none + */ +static void scic_sds_phy_starting_initial_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); + + /* This is just an temporary state go off to the starting state */ + sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( + void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the + * struct scic_sds_phy object state handlers for this state. - Add this phy object to + * the power control queue none + */ +static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER + ); + + scic_sds_controller_power_control_queue_insert( + scic_sds_phy_get_controller(sci_phy), + sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the + * struct scic_sds_phy object from the power control queue. none + */ +static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_controller_power_control_queue_remove( + scic_sds_phy_get_controller(sci_phy), sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the + * struct scic_sds_phy object state handlers for this state. - Add this phy object to + * the power control queue none + */ +static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER + ); + + scic_sds_controller_power_control_queue_insert( + scic_sds_phy_get_controller(sci_phy), + sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the + * struct scic_sds_phy object from the power control queue. none + */ +static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_controller_power_control_queue_remove( + scic_sds_phy_get_controller(sci_phy), + sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); + + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy + * on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer + * that was started on entry to await sata phy event notification none + */ +static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( + void *object) +{ + struct scic_sds_phy *sci_phy = object; + + isci_timer_stop(sci_phy->sata_timeout_timer); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the + * struct scic_sds_phy object state handlers for this state. none + */ +static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the + * struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer + * that was started on entry to await sata phy event notification none + */ +static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( + void *object) +{ + struct scic_sds_phy *sci_phy = object; + + isci_timer_stop(sci_phy->sata_timeout_timer); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the + * struct scic_sds_phy object state handlers for this state. + * - Start the SIGNATURE FIS + * timeout timer none + */ +static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) +{ + bool continue_to_ready_state; + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers( + sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + + continue_to_ready_state = scic_sds_port_link_detected( + sci_phy->owning_port, + sci_phy); + + if (continue_to_ready_state) { + /* + * Clear the PE suspend condition so we can actually + * receive SIG FIS + * The hardware will not respond to the XRDY until the PE + * suspend condition is cleared. + */ + scic_sds_phy_resume(sci_phy); + + isci_timer_start(sci_phy->sata_timeout_timer, + SCIC_SDS_SIGNATURE_FIS_TIMEOUT); + } else + sci_phy->is_in_link_training = false; +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the + * struct scic_sds_phy on exiting + * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE + * FIS timeout timer. none + */ +static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( + void *object) +{ + struct scic_sds_phy *sci_phy = object; + + isci_timer_stop(sci_phy->sata_timeout_timer); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy + * object state handlers for this state. - Change base state machine to the + * ready state. none + */ +static void scic_sds_phy_starting_final_substate_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_starting_substate_handlers(sci_phy, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + /* State machine has run to completion so exit out and change + * the base state machine to the ready state + */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_READY); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_phy_starting_substates[] = { + [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { + .enter_state = scic_sds_phy_starting_initial_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { + .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { + .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { + .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { + .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, + .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { + .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { + .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { + .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { + .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, + .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { + .enter_state = scic_sds_phy_starting_final_substate_enter, + } +}; + +/* + * This method takes the struct scic_sds_phy from a stopped state and + * attempts to start it. - The phy state machine is transitioned to the + * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS + */ +static enum sci_status +scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) +{ + struct isci_host *ihost; + struct scic_sds_controller *scic; + + scic = scic_sds_phy_get_controller(sci_phy), + ihost = scic_to_ihost(scic); + + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, + scic_sds_phy_sata_timeout); + + if (sci_phy->sata_timeout_timer) + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) +{ + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) +{ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) +{ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_RESETTING); + + return SCI_SUCCESS; +} + +/** + * scic_sds_phy_ready_state_event_handler - + * @phy: This is the struct scic_sds_phy object which has received the event. + * + * This method request the struct scic_sds_phy handle the received event. The only + * event that we are interested in while in the ready state is the link failure + * event. - decoded event is a link failure - transition the struct scic_sds_phy back + * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will + * report a warning message enum sci_status SCI_SUCCESS if the event received is a + * link failure SCI_FAILURE_INVALID_STATE for any other event received. + */ +static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + enum sci_status result = SCI_FAILURE; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + result = SCI_SUCCESS; + break; + + case SCU_EVENT_BROADCAST_CHANGE: + /* Broadcast change received. Notify the port. */ + if (scic_sds_phy_get_port(sci_phy) != NULL) + scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); + else + sci_phy->bcn_received_while_port_unassigned = true; + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%sP SCIC PHY 0x%p ready state machine received " + "unexpected event_code %x\n", + __func__, sci_phy, event_code); + + result = SCI_FAILURE_INVALID_STATE; + break; + } + + return result; +} + +static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + enum sci_status result = SCI_FAILURE; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_HARD_RESET_TRANSMITTED: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + result = SCI_SUCCESS; + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: SCIC PHY 0x%p resetting state machine received " + "unexpected event_code %x\n", + __func__, sci_phy, event_code); + + result = SCI_FAILURE_INVALID_STATE; + break; + } + + return result; +} + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { + [SCI_BASE_PHY_STATE_INITIAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_STOPPED] = { + .start_handler = scic_sds_phy_stopped_state_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_STARTING] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_READY] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_ready_state_stop_handler, + .reset_handler = scic_sds_phy_ready_state_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_ready_state_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_RESETTING] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_resetting_state_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_FINAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + } +}; + +/* + * **************************************************************************** + * * PHY STATE PRIVATE METHODS + * **************************************************************************** */ + +/** + * + * @sci_phy: This is the struct scic_sds_phy object to stop. + * + * This method will stop the struct scic_sds_phy object. This does not reset the + * protocol engine it just suspends it and places it in a state where it will + * not cause the end device to power up. none + */ +static void scu_link_layer_stop_protocol_engine( + struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + u32 enable_spinup_value; + + /* Suspend the protocol engine and place it in a sata spinup hold state */ + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= + (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | + SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Disable the notify enable spinup primitives */ + enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); + enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control); +} + +/** + * + * + * This method will start the OOB/SN state machine for this struct scic_sds_phy object. + */ +static void scu_link_layer_start_oob( + struct scic_sds_phy *sci_phy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); +} + +/** + * + * + * This method will transmit a hard reset request on the specified phy. The SCU + * hardware requires that we reset the OOB state machine and set the hard reset + * bit in the phy configuration register. We then must start OOB over with the + * hard reset bit set. + */ +static void scu_link_layer_tx_hard_reset( + struct scic_sds_phy *sci_phy) +{ + u32 phy_configuration_value; + + /* + * SAS Phys must wait for the HARD_RESET_TX event notification to transition + * to the starting state. */ + phy_configuration_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + phy_configuration_value |= + (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | + SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); + writel(phy_configuration_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Now take the OOB state machine out of reset */ + phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(phy_configuration_value, + &sci_phy->link_layer_registers->phy_configuration); +} + +/* + * **************************************************************************** + * * PHY BASE STATE METHODS + * **************************************************************************** */ + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state + * handlers for the phy object base state machine initial state. none + */ +static void scic_sds_phy_initial_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This function will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state + * handlers for the phy object base state machine initial state. - The SCU + * hardware is requested to stop the protocol engine. none + */ +static void scic_sds_phy_stopped_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + struct isci_host *ihost = scic_to_ihost(scic); + + /* + * @todo We need to get to the controller to place this PE in a + * reset state + */ + + scic_sds_phy_set_base_state_handlers(sci_phy, + SCI_BASE_PHY_STATE_STOPPED); + + if (sci_phy->sata_timeout_timer != NULL) { + isci_del_timer(ihost, sci_phy->sata_timeout_timer); + + sci_phy->sata_timeout_timer = NULL; + } + + scu_link_layer_stop_protocol_engine(sci_phy); + + if (sci_phy->state_machine.previous_state_id != + SCI_BASE_PHY_STATE_INITIAL) + scic_sds_controller_link_down( + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state + * handlers for the phy object base state machine starting state. - The SCU + * hardware is requested to start OOB/SN on this protocl engine. - The phy + * starting substate machine is started. - If the previous state was the ready + * state then the struct scic_sds_controller is informed that the phy has gone link + * down. none + */ +static void scic_sds_phy_starting_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING); + + scu_link_layer_stop_protocol_engine(sci_phy); + scu_link_layer_start_oob(sci_phy); + + /* We don't know what kind of phy we are going to be just yet */ + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + sci_phy->bcn_received_while_port_unassigned = false; + + /* Change over to the starting substate machine to continue */ + sci_base_state_machine_start(&sci_phy->starting_substate_machine); + + if (sci_phy->state_machine.previous_state_id + == SCI_BASE_PHY_STATE_READY) { + scic_sds_controller_link_down( + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy + ); + } +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state + * handlers for the phy object base state machine ready state. - The SCU + * hardware protocol engine is resumed. - The struct scic_sds_controller is informed + * that the phy object has gone link up. none + */ +static void scic_sds_phy_ready_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY); + + scic_sds_controller_link_up( + scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on exiting + * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware + * protocol engine represented by this struct scic_sds_phy object. none + */ +static void scic_sds_phy_ready_state_exit(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_suspend(sci_phy); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state + * handlers for the phy object base state machine resetting state. none + */ +static void scic_sds_phy_resetting_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING); + + /* + * The phy is being reset, therefore deactivate it from the port. + * In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false); + + if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + scu_link_layer_tx_hard_reset(sci_phy); + } else { + /* + * The SCU does not need to have a discrete reset state so + * just go back to the starting state. + */ + sci_base_state_machine_change_state( + &sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + } +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_phy object. + * + * This method will perform the actions required by the struct scic_sds_phy on + * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state + * handlers for the phy object base state machine final state. none + */ +static void scic_sds_phy_final_state_enter(void *object) +{ + struct scic_sds_phy *sci_phy = object; + + scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL); + + /* Nothing to do here */ +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_phy_state_table[] = { + [SCI_BASE_PHY_STATE_INITIAL] = { + .enter_state = scic_sds_phy_initial_state_enter, + }, + [SCI_BASE_PHY_STATE_STOPPED] = { + .enter_state = scic_sds_phy_stopped_state_enter, + }, + [SCI_BASE_PHY_STATE_STARTING] = { + .enter_state = scic_sds_phy_starting_state_enter, + }, + [SCI_BASE_PHY_STATE_READY] = { + .enter_state = scic_sds_phy_ready_state_enter, + .exit_state = scic_sds_phy_ready_state_exit, + }, + [SCI_BASE_PHY_STATE_RESETTING] = { + .enter_state = scic_sds_phy_resetting_state_enter, + }, + [SCI_BASE_PHY_STATE_FINAL] = { + .enter_state = scic_sds_phy_final_state_enter, + }, +}; + +void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, + struct scic_sds_port *owning_port, u8 phy_index) +{ + sci_base_state_machine_construct(&sci_phy->state_machine, + sci_phy, + scic_sds_phy_state_table, + SCI_BASE_PHY_STATE_INITIAL); + + sci_base_state_machine_start(&sci_phy->state_machine); + + /* Copy the rest of the input data to our locals */ + sci_phy->owning_port = owning_port; + sci_phy->phy_index = phy_index; + sci_phy->bcn_received_while_port_unassigned = false; + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + sci_phy->link_layer_registers = NULL; + sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + sci_phy->sata_timeout_timer = NULL; + + /* Initialize the the substate machines */ + sci_base_state_machine_construct(&sci_phy->starting_substate_machine, + sci_phy, + scic_sds_phy_starting_substates, + SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); +} void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) { diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 3a95adb..093fd47 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -57,7 +57,105 @@ #include #include -#include "scic_sds_phy.h" +#include "state_machine.h" + +/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS + * before restarting the starting state machine. Technically, the old parallel + * ATA specification required up to 30 seconds for a device to issue its + * signature FIS as a result of a soft reset. Now we see that devices respond + * generally within 15 seconds, but we'll use 25 for now. + */ +#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000 + +/* This is the timeout for the SATA OOB/SN because the hardware does not + * recognize a hot plug after OOB signal but before the SN signals. We need to + * make sure after a hotplug timeout if we have not received the speed event + * notification from the hardware that we restart the hardware OOB state + * machine. + */ +#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 + +enum scic_sds_phy_protocol { + SCIC_SDS_PHY_PROTOCOL_UNKNOWN, + SCIC_SDS_PHY_PROTOCOL_SAS, + SCIC_SDS_PHY_PROTOCOL_SATA, + SCIC_SDS_MAX_PHY_PROTOCOLS +}; + +/** + * struct scic_sds_phy - This structure contains or references all of the data + * necessary to represent the core phy object and SCU harware protocol + * engine. + * + * + */ +struct scic_sds_phy { + /** + * This field contains the information for the base phy state machine. + */ + struct sci_base_state_machine state_machine; + + /** + * This field specifies the port object that owns/contains this phy. + */ + struct scic_sds_port *owning_port; + + /** + * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s, + * or 6.0 Gb/s operation. + */ + enum sas_linkrate max_negotiated_speed; + + /** + * This member specifies the protocol being utilized on this phy. This + * field contains a legitamite value once the PHY has link trained with + * a remote phy. + */ + enum scic_sds_phy_protocol protocol; + + /** + * This field specifies the index with which this phy is associated (0-3). + */ + u8 phy_index; + + /** + * This member indicates if this particular PHY has received a BCN while + * it had no port assignement. This BCN will be reported once the phy is + * assigned to a port. + */ + bool bcn_received_while_port_unassigned; + + /** + * This field indicates if this PHY is currently in the process of + * link training (i.e. it has started OOB, but has yet to perform + * IAF exchange/Signature FIS reception). + */ + bool is_in_link_training; + + /** + * This field contains a reference to the timer utilized in detecting + * when a signature FIS timeout has occurred. The signature FIS is the + * first FIS sent by an attached SATA device after OOB/SN. + */ + void *sata_timeout_timer; + + const struct scic_sds_phy_state_handler *state_handlers; + + struct sci_base_state_machine starting_substate_machine; + + /** + * This field is the pointer to the transport layer register for the SCU + * hardware. + */ + struct scu_transport_layer_registers __iomem *transport_layer_registers; + + /** + * This field points to the link layer register set within the SCU. + */ + struct scu_link_layer_registers __iomem *link_layer_registers; + +}; + struct isci_phy { struct scic_sds_phy sci; @@ -85,6 +183,480 @@ static inline struct isci_phy *sci_phy_to_iphy(struct scic_sds_phy *sci_phy) return iphy; } +struct scic_phy_cap { + union { + struct { + /* + * The SAS specification indicates the start bit shall + * always be set to + * 1. This implementation will have the start bit set + * to 0 if the PHY CAPABILITIES were either not + * received or speed negotiation failed. + */ + u8 start:1; + u8 tx_ssc_type:1; + u8 res1:2; + u8 req_logical_linkrate:4; + + u32 gen1_no_ssc:1; + u32 gen1_ssc:1; + u32 gen2_no_ssc:1; + u32 gen2_ssc:1; + u32 gen3_no_ssc:1; + u32 gen3_ssc:1; + u32 res2:17; + u32 parity:1; + }; + u32 all; + }; +} __packed; + +/* this data structure reflects the link layer transmit identification reg */ +struct scic_phy_proto { + union { + struct { + u16 _r_a:1; + u16 smp_iport:1; + u16 stp_iport:1; + u16 ssp_iport:1; + u16 _r_b:4; + u16 _r_c:1; + u16 smp_tport:1; + u16 stp_tport:1; + u16 ssp_tport:1; + u16 _r_d:4; + }; + u16 all; + }; +} __packed; + + +/** + * struct scic_phy_properties - This structure defines the properties common to + * all phys that can be retrieved. + * + * + */ +struct scic_phy_properties { + /** + * This field specifies the port that currently contains the + * supplied phy. This field may be set to NULL + * if the phy is not currently contained in a port. + */ + struct scic_sds_port *owning_port; + + /** + * This field specifies the link rate at which the phy is + * currently operating. + */ + enum sas_linkrate negotiated_link_rate; + + /** + * This field specifies the index of the phy in relation to other + * phys within the controller. This index is zero relative. + */ + u8 index; +}; + +/** + * struct scic_sas_phy_properties - This structure defines the properties, + * specific to a SAS phy, that can be retrieved. + * + * + */ +struct scic_sas_phy_properties { + /** + * This field delineates the Identify Address Frame received + * from the remote end point. + */ + struct sas_identify_frame rcvd_iaf; + + /** + * This field delineates the Phy capabilities structure received + * from the remote end point. + */ + struct scic_phy_cap rcvd_cap; + +}; + +/** + * struct scic_sata_phy_properties - This structure defines the properties, + * specific to a SATA phy, that can be retrieved. + * + * + */ +struct scic_sata_phy_properties { + /** + * This field delineates the signature FIS received from the + * attached target. + */ + struct dev_to_host_fis signature_fis; + + /** + * This field specifies to the user if a port selector is connected + * on the specified phy. + */ + bool is_port_selector_present; + +}; + +/** + * enum scic_phy_counter_id - This enumeration depicts the various pieces of + * optional information that can be retrieved for a specific phy. + * + * + */ +enum scic_phy_counter_id { + /** + * This PHY information field tracks the number of frames received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME, + + /** + * This PHY information field tracks the number of frames transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME, + + /** + * This PHY information field tracks the number of DWORDs received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD, + + /** + * This PHY information field tracks the number of DWORDs transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD, + + /** + * This PHY information field tracks the number of times DWORD + * synchronization was lost. + */ + SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR, + + /** + * This PHY information field tracks the number of received DWORDs with + * running disparity errors. + */ + SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR, + + /** + * This PHY information field tracks the number of received frames with a + * CRC error (not including short or truncated frames). + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of times the inactivity + * timer for connections on the phy has been utilized. + */ + SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of CREDIT BLOCKED + * primitives received. + * @note Depending on remote device implementation, credit blocks + * may occur regularly. + */ + SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED, + + /** + * This PHY information field contains the number of short frames + * received. A short frame is simply a frame smaller then what is + * allowed by either the SAS or SATA specification. + */ + SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME, + + /** + * This PHY information field contains the number of frames received after + * credit has been exhausted. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT, + + /** + * This PHY information field contains the number of frames received after + * a DONE has been received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE, + + /** + * This PHY information field contains the number of times the phy + * failed to achieve DWORD synchronization during speed negotiation. + */ + SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR +}; + +enum scic_sds_phy_states { + /** + * Simply the initial state for the base domain state machine. + */ + SCI_BASE_PHY_STATE_INITIAL, + + /** + * This state indicates that the phy has successfully been stopped. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the INITIAL state. + * This state is entered from the STARTING state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PHY_STATE_STOPPED, + + /** + * This state indicates that the phy is in the process of becomming + * ready. In this state no new IO operations are permitted on this phy. + * This state is entered from the STOPPED state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PHY_STATE_STARTING, + + /** + * This state indicates the the phy is now ready. Thus, the user + * is able to perform IO operations utilizing this phy as long as it + * is currently part of a valid port. + * This state is entered from the STARTING state. + */ + SCI_BASE_PHY_STATE_READY, + + /** + * This state indicates that the phy is in the process of being reset. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the READY state. + */ + SCI_BASE_PHY_STATE_RESETTING, + + /** + * Simply the final state for the base phy state machine. + */ + SCI_BASE_PHY_STATE_FINAL, +}; + + +/** + * enum scic_sds_phy_starting_substates - + * + * + */ +enum scic_sds_phy_starting_substates { + /** + * Initial state + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL, + + /** + * Wait state for the hardware OSSP event type notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN, + + /** + * Wait state for the PHY speed notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN, + + /** + * Wait state for the IAF Unsolicited frame notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF, + + /** + * Wait state for the request to consume power + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER, + + /** + * Wait state for request to consume power + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER, + + /** + * Wait state for the SATA PHY notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN, + + /** + * Wait for the SATA PHY speed notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN, + + /** + * Wait state for the SIGNATURE FIS unsolicited frame notification + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF, + + /** + * Exit state for this state machine + */ + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL, +}; + + + +typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *); +typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32); +typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32); +typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); + +struct scic_sds_phy_state_handler { + /** + * The start_handler specifies the method invoked when there is an + * attempt to start a phy. + */ + scic_sds_phy_handler_t start_handler; + + /** + * The stop_handler specifies the method invoked when there is an + * attempt to stop a phy. + */ + scic_sds_phy_handler_t stop_handler; + + /** + * The reset_handler specifies the method invoked when there is an + * attempt to reset a phy. + */ + scic_sds_phy_handler_t reset_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a phy. + */ + scic_sds_phy_handler_t destruct_handler; + + /** + * The state handler for unsolicited frames received from the SCU hardware. + */ + scic_sds_phy_frame_handler_t frame_handler; + + /** + * The state handler for events received from the SCU hardware. + */ + scic_sds_phy_event_handler_t event_handler; + + /** + * The state handler for staggered spinup. + */ + scic_sds_phy_power_handler_t consume_power_handler; + +}; + +/** + * scic_sds_phy_get_index() - + * + * This macro returns the phy index for the specified phy + */ +#define scic_sds_phy_get_index(phy) \ + ((phy)->phy_index) + +/** + * scic_sds_phy_get_controller() - This macro returns the controller for this + * phy + * + * + */ +#define scic_sds_phy_get_controller(phy) \ + (scic_sds_port_get_controller((phy)->owning_port)) + +/** + * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for + * this phy object + * + * + */ +#define scic_sds_phy_set_state_handlers(phy, handlers) \ + ((phy)->state_handlers = (handlers)) + +/** + * scic_sds_phy_set_base_state_handlers() - + * + * This macro set the base state handlers for the phy object. + */ +#define scic_sds_phy_set_base_state_handlers(phy, state_id) \ + scic_sds_phy_set_state_handlers(\ + (phy), \ + &scic_sds_phy_state_handler_table[(state_id)] \ + ) + +void scic_sds_phy_construct( + struct scic_sds_phy *this_phy, + struct scic_sds_port *owning_port, + u8 phy_index); + +struct scic_sds_port *scic_sds_phy_get_port( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_set_port( + struct scic_sds_phy *this_phy, + struct scic_sds_port *owning_port); + +enum sci_status scic_sds_phy_initialize( + struct scic_sds_phy *this_phy, + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers); + +enum sci_status scic_sds_phy_start( + struct scic_sds_phy *this_phy); + +enum sci_status scic_sds_phy_stop( + struct scic_sds_phy *this_phy); + +enum sci_status scic_sds_phy_reset( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_resume( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_setup_transport( + struct scic_sds_phy *this_phy, + u32 device_id); + +enum sci_status scic_sds_phy_event_handler( + struct scic_sds_phy *this_phy, + u32 event_code); + +enum sci_status scic_sds_phy_frame_handler( + struct scic_sds_phy *this_phy, + u32 frame_index); + +enum sci_status scic_sds_phy_consume_power_handler( + struct scic_sds_phy *this_phy); + +void scic_sds_phy_get_sas_address( + struct scic_sds_phy *this_phy, + struct sci_sas_address *sas_address); + +void scic_sds_phy_get_attached_sas_address( + struct scic_sds_phy *this_phy, + struct sci_sas_address *sas_address); + +struct scic_phy_proto; +void scic_sds_phy_get_protocols( + struct scic_sds_phy *sci_phy, + struct scic_phy_proto *protocols); +enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy); + struct isci_host; void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index); int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf); diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index d4bf6d2..321935d 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -55,8 +55,6 @@ #include #include "isci.h" -#include "scic_phy.h" -#include "scic_sds_phy.h" #include "scic_port.h" #include "port.h" #include "request.h" diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 2339010..2baa215 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -57,9 +57,7 @@ #include "port.h" #include "remote_device.h" #include "request.h" -#include "scic_phy.h" #include "scic_port.h" -#include "scic_sds_phy.h" #include "scic_sds_port.h" #include "remote_node_context.h" #include "scu_event_codes.h" -- cgit v0.10.2 From e2f8db509fdd354bb7a68c86515e9d2d8909ccc9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2011 02:28:46 -0700 Subject: isci: uplevel port infrastructure * Move port configuration agent implementation * Merge core/scic_sds_port.[ch] into port.[ch] Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 2830a97..48218ca 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -1,4 +1,3 @@ -EXTRA_CFLAGS += -Idrivers/scsi/isci/core/ -Idrivers/scsi/isci/ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ remote_device.o port.o timers.o \ @@ -10,5 +9,4 @@ isci-objs := init.o phy.o request.o sata.o \ stp_request.o \ ssp_request.o \ smp_request.o \ - core/scic_sds_port.o \ - core/scic_sds_port_configuration_agent.o \ + port_config.o \ diff --git a/drivers/scsi/isci/core/scic_config_parameters.h b/drivers/scsi/isci/core/scic_config_parameters.h deleted file mode 100644 index 15e7744..0000000 --- a/drivers/scsi/isci/core/scic_config_parameters.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_USER_PARAMETERS_H_ -#define _SCIC_SDS_USER_PARAMETERS_H_ - -#include "probe_roms.h" - -struct scic_sds_controller; - -/** - * - * - * SCIC_SDS_PARM_PHY_SPEED These constants define the speeds utilized for a - * phy/port. - */ -#define SCIC_SDS_PARM_NO_SPEED 0 - -/** - * - * - * This value of 1 indicates generation 1 (i.e. 1.5 Gb/s). - */ -#define SCIC_SDS_PARM_GEN1_SPEED 1 - -/** - * - * - * This value of 2 indicates generation 2 (i.e. 3.0 Gb/s). - */ -#define SCIC_SDS_PARM_GEN2_SPEED 2 - -/** - * - * - * This value of 3 indicates generation 3 (i.e. 6.0 Gb/s). - */ -#define SCIC_SDS_PARM_GEN3_SPEED 3 - -/** - * - * - * For range checks, the max speed generation - */ -#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED - -/** - * struct scic_sds_user_parameters - This structure delineates the various user - * parameters that can be changed by the core user. - * - * - */ -struct scic_sds_user_parameters { - struct sci_phy_user_params { - /** - * This field specifies the NOTIFY (ENABLE SPIN UP) primitive - * insertion frequency for this phy index. - */ - u32 notify_enable_spin_up_insertion_frequency; - - /** - * This method specifies the number of transmitted DWORDs within which - * to transmit a single ALIGN primitive. This value applies regardless - * of what type of device is attached or connection state. A value of - * 0 indicates that no ALIGN primitives will be inserted. - */ - u16 align_insertion_frequency; - - /** - * This method specifies the number of transmitted DWORDs within which - * to transmit 2 ALIGN primitives. This applies for SAS connections - * only. A minimum value of 3 is required for this field. - */ - u16 in_connection_align_insertion_frequency; - - /** - * This field indicates the maximum speed generation to be utilized - * by phys in the supplied port. - * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s). - * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s). - * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s). - */ - u8 max_speed_generation; - - } phys[SCI_MAX_PHYS]; - - /** - * This field specifies the maximum number of direct attached devices - * that can have power supplied to them simultaneously. - */ - u8 max_number_concurrent_device_spin_up; - - /** - * This field specifies the number of seconds to allow a phy to consume - * power before yielding to another phy. - * - */ - u8 phy_spin_up_delay_interval; - - /** - * These timer values specifies how long a link will remain open with no - * activity in increments of a microsecond, it can be in increments of - * 100 microseconds if the upper most bit is set. - * - */ - u16 stp_inactivity_timeout; - u16 ssp_inactivity_timeout; - - /** - * These timer values specifies how long a link will remain open in increments - * of 100 microseconds. - * - */ - u16 stp_max_occupancy_timeout; - u16 ssp_max_occupancy_timeout; - - /** - * This timer value specifies how long a link will remain open with no - * outbound traffic in increments of a microsecond. - * - */ - u8 no_outbound_task_timeout; - -}; - -/** - * This structure/union specifies the various different user parameter sets - * available. Each type is specific to a hardware controller version. - * - * union scic_user_parameters - */ -union scic_user_parameters { - /** - * This field specifies the user parameters specific to the - * Storage Controller Unit (SCU) Driver Standard (SDS) version - * 1. - */ - struct scic_sds_user_parameters sds1; - -}; - - -/** - * - * - * SCIC_SDS_OEM_PHY_MASK These constants define the valid values for phy_mask - */ - -/** - * - * - * This is the min value assignable to a port's phy mask - */ -#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0 - -/** - * - * - * This is the max value assignable to a port's phy mask - */ -#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF - -#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 - -/** - * This structure/union specifies the various different OEM parameter sets - * available. Each type is specific to a hardware controller version. - * - * union scic_oem_parameters - */ -union scic_oem_parameters { - /** - * This field specifies the OEM parameters specific to the - * Storage Controller Unit (SCU) Driver Standard (SDS) version - * 1. - */ - struct scic_sds_oem_params sds1; -}; - -int scic_oem_parameters_validate(struct scic_sds_oem_params *oem); - -/** - * scic_oem_parameters_get() - This method allows the user to retreive the OEM - * parameters utilized by the controller. - * @controller: This parameter specifies the controller on which to set the - * user parameters. - * @oem_parameters: This parameter specifies the OEM parameters object in which - * to write the core's OEM parameters. - * - */ -void scic_oem_parameters_get( - struct scic_sds_controller *controller, - union scic_oem_parameters *oem_parameters); - - -#endif /* _SCIC_SDS_USER_PARAMETERS_H_ */ - diff --git a/drivers/scsi/isci/core/scic_port.h b/drivers/scsi/isci/core/scic_port.h deleted file mode 100644 index 431dbd2..0000000 --- a/drivers/scsi/isci/core/scic_port.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_PORT_H_ -#define _SCIC_PORT_H_ - -#include "isci.h" -#include "sas.h" -#include "phy.h" - -struct scic_sds_port; - -enum scic_port_not_ready_reason_code { - SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, - SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, - SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, - SCIC_PORT_NOT_READY_RECONFIGURING, - - SCIC_PORT_NOT_READY_REASON_CODE_MAX -}; - -struct scic_port_end_point_properties { - struct sci_sas_address sas_address; - struct scic_phy_proto protocols; -}; - -struct scic_port_properties { - u32 index; - struct scic_port_end_point_properties local; - struct scic_port_end_point_properties remote; - u32 phy_mask; -}; - -enum sci_status scic_port_get_properties( - struct scic_sds_port *port, - struct scic_port_properties *properties); - -enum sci_status scic_port_hard_reset( - struct scic_sds_port *port, - u32 reset_timeout); - -void scic_port_enable_broadcast_change_notification( - struct scic_sds_port *port); - -#endif /* _SCIC_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c deleted file mode 100644 index 11b516a..0000000 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ /dev/null @@ -1,2423 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "host.h" -#include "scic_port.h" -#include "scic_sds_port.h" -#include "remote_device.h" -#include "remote_node_context.h" -#include "registers.h" -#include "timers.h" -#include "scu_task_context.h" - -#define SCIC_SDS_PORT_MIN_TIMER_COUNT (SCI_MAX_PORTS) -#define SCIC_SDS_PORT_MAX_TIMER_COUNT (SCI_MAX_PORTS) - -#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) -#define SCU_DUMMY_INDEX (0xFFFF) - - -/** - * - * @sci_port: This is the port object to which the phy is being assigned. - * @phy_index: This is the phy index that is being assigned to the port. - * - * This method will return a true value if the specified phy can be assigned to - * this port The following is a list of phys for each port that are allowed: - - * Port 0 - 3 2 1 0 - Port 1 - 1 - Port 2 - 3 2 - Port 3 - 3 This method - * doesn't preclude all configurations. It merely ensures that a phy is part - * of the allowable set of phy identifiers for that port. For example, one - * could assign phy 3 to port 0 and no other phys. Please refer to - * scic_sds_port_is_phy_mask_valid() for information regarding whether the - * phy_mask for a port can be supported. bool true if this is a valid phy - * assignment for the port false if this is not a valid phy assignment for the - * port - */ -bool scic_sds_port_is_valid_phy_assignment( - struct scic_sds_port *sci_port, - u32 phy_index) -{ - /* Initialize to invalid value. */ - u32 existing_phy_index = SCI_MAX_PHYS; - u32 index; - - if ((sci_port->physical_port_index == 1) && (phy_index != 1)) { - return false; - } - - if (sci_port->physical_port_index == 3 && phy_index != 3) { - return false; - } - - if ( - (sci_port->physical_port_index == 2) - && ((phy_index == 0) || (phy_index == 1)) - ) { - return false; - } - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if ((sci_port->phy_table[index] != NULL) - && (index != phy_index)) { - existing_phy_index = index; - } - } - - /* - * Ensure that all of the phys in the port are capable of - * operating at the same maximum link rate. */ - if ( - (existing_phy_index < SCI_MAX_PHYS) - && (sci_port->owning_controller->user_parameters.sds1.phys[ - phy_index].max_speed_generation != - sci_port->owning_controller->user_parameters.sds1.phys[ - existing_phy_index].max_speed_generation) - ) - return false; - - return true; -} - -/** - * This method requests a list (mask) of the phys contained in the supplied SAS - * port. - * @sci_port: a handle corresponding to the SAS port for which to return the - * phy mask. - * - * Return a bit mask indicating which phys are a part of this port. Each bit - * corresponds to a phy identifier (e.g. bit 0 = phy id 0). - */ -static u32 scic_sds_port_get_phys(struct scic_sds_port *sci_port) -{ - u32 index; - u32 mask; - - mask = 0; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) { - mask |= (1 << index); - } - } - - return mask; -} - -/** - * - * @sci_port: This is the port object for which to determine if the phy mask - * can be supported. - * - * This method will return a true value if the port's phy mask can be supported - * by the SCU. The following is a list of valid PHY mask configurations for - * each port: - Port 0 - [[3 2] 1] 0 - Port 1 - [1] - Port 2 - [[3] 2] - * - Port 3 - [3] This method returns a boolean indication specifying if the - * phy mask can be supported. true if this is a valid phy assignment for the - * port false if this is not a valid phy assignment for the port - */ -static bool scic_sds_port_is_phy_mask_valid( - struct scic_sds_port *sci_port, - u32 phy_mask) -{ - if (sci_port->physical_port_index == 0) { - if (((phy_mask & 0x0F) == 0x0F) - || ((phy_mask & 0x03) == 0x03) - || ((phy_mask & 0x01) == 0x01) - || (phy_mask == 0)) - return true; - } else if (sci_port->physical_port_index == 1) { - if (((phy_mask & 0x02) == 0x02) - || (phy_mask == 0)) - return true; - } else if (sci_port->physical_port_index == 2) { - if (((phy_mask & 0x0C) == 0x0C) - || ((phy_mask & 0x04) == 0x04) - || (phy_mask == 0)) - return true; - } else if (sci_port->physical_port_index == 3) { - if (((phy_mask & 0x08) == 0x08) - || (phy_mask == 0)) - return true; - } - - return false; -} - -/** - * - * @sci_port: This parameter specifies the port from which to return a - * connected phy. - * - * This method retrieves a currently active (i.e. connected) phy contained in - * the port. Currently, the lowest order phy that is connected is returned. - * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is - * returned if there are no currently active (i.e. connected to a remote end - * point) phys contained in the port. All other values specify a struct scic_sds_phy - * object that is active in the port. - */ -static struct scic_sds_phy *scic_sds_port_get_a_connected_phy( - struct scic_sds_port *sci_port - ) { - u32 index; - struct scic_sds_phy *phy; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - /* - * Ensure that the phy is both part of the port and currently - * connected to the remote end-point. */ - phy = sci_port->phy_table[index]; - if ( - (phy != NULL) - && scic_sds_port_active_phy(sci_port, phy) - ) { - return phy; - } - } - - return NULL; -} - -/** - * scic_sds_port_set_phy() - - * @out]: port The port object to which the phy assignement is being made. - * @out]: phy The phy which is being assigned to the port. - * - * This method attempts to make the assignment of the phy to the port. If - * successful the phy is assigned to the ports phy table. bool true if the phy - * assignment can be made. false if the phy assignement can not be made. This - * is a functional test that only fails if the phy is currently assigned to a - * different port. - */ -static enum sci_status scic_sds_port_set_phy( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - /* - * Check to see if we can add this phy to a port - * that means that the phy is not part of a port and that the port does - * not already have a phy assinged to the phy index. */ - if ( - (port->phy_table[phy->phy_index] == NULL) - && (scic_sds_phy_get_port(phy) == NULL) - && scic_sds_port_is_valid_phy_assignment(port, phy->phy_index) - ) { - /* - * Phy is being added in the stopped state so we are in MPC mode - * make logical port index = physical port index */ - port->logical_port_index = port->physical_port_index; - port->phy_table[phy->phy_index] = phy; - scic_sds_phy_set_port(phy, port); - - return SCI_SUCCESS; - } - - return SCI_FAILURE; -} - -/** - * scic_sds_port_clear_phy() - - * @out]: port The port from which the phy is being cleared. - * @out]: phy The phy being cleared from the port. - * - * This method will clear the phy assigned to this port. This method fails if - * this phy is not currently assinged to this port. bool true if the phy is - * removed from the port. false if this phy is not assined to this port. - */ -static enum sci_status scic_sds_port_clear_phy( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - /* Make sure that this phy is part of this port */ - if (port->phy_table[phy->phy_index] == phy && - scic_sds_phy_get_port(phy) == port) { - struct scic_sds_controller *scic = port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - - /* Yep it is assigned to this port so remove it */ - scic_sds_phy_set_port(phy, &ihost->ports[SCI_MAX_PORTS].sci); - port->phy_table[phy->phy_index] = NULL; - return SCI_SUCCESS; - } - - return SCI_FAILURE; -} - -/** - * scic_sds_port_add_phy() - - * @sci_port: This parameter specifies the port in which the phy will be added. - * @sci_phy: This parameter is the phy which is to be added to the port. - * - * This method will add a PHY to the selected port. This method returns an - * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other status - * is failre to add the phy to the port. - */ -enum sci_status scic_sds_port_add_phy( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - return sci_port->state_handlers->add_phy_handler( - sci_port, sci_phy); -} - - -/** - * scic_sds_port_remove_phy() - - * @sci_port: This parameter specifies the port in which the phy will be added. - * @sci_phy: This parameter is the phy which is to be added to the port. - * - * This method will remove the PHY from the selected PORT. This method returns - * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any other - * status is failre to add the phy to the port. - */ -enum sci_status scic_sds_port_remove_phy( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - return sci_port->state_handlers->remove_phy_handler( - sci_port, sci_phy); -} - -/** - * This method requests the SAS address for the supplied SAS port from the SCI - * implementation. - * @sci_port: a handle corresponding to the SAS port for which to return the - * SAS address. - * @sas_address: This parameter specifies a pointer to a SAS address structure - * into which the core will copy the SAS address for the port. - * - */ -void scic_sds_port_get_sas_address( - struct scic_sds_port *sci_port, - struct sci_sas_address *sas_address) -{ - u32 index; - - sas_address->high = 0; - sas_address->low = 0; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) { - scic_sds_phy_get_sas_address(sci_port->phy_table[index], sas_address); - } - } -} - -/* - * This function will indicate which protocols are supported by this port. - * @sci_port: a handle corresponding to the SAS port for which to return the - * supported protocols. - * @protocols: This parameter specifies a pointer to a data structure - * which the core will copy the protocol values for the port from the - * transmit_identification register. - */ -static void -scic_sds_port_get_protocols(struct scic_sds_port *sci_port, - struct scic_phy_proto *protocols) -{ - u8 index; - - protocols->all = 0; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) { - scic_sds_phy_get_protocols(sci_port->phy_table[index], - protocols); - } - } -} - -/* - * This function requests the SAS address for the device directly attached to - * this SAS port. - * @sci_port: a handle corresponding to the SAS port for which to return the - * SAS address. - * @sas_address: This parameter specifies a pointer to a SAS address structure - * into which the core will copy the SAS address for the device directly - * attached to the port. - * - */ -void scic_sds_port_get_attached_sas_address( - struct scic_sds_port *sci_port, - struct sci_sas_address *sas_address) -{ - struct scic_sds_phy *sci_phy; - - /* - * Ensure that the phy is both part of the port and currently - * connected to the remote end-point. - */ - sci_phy = scic_sds_port_get_a_connected_phy(sci_port); - if (sci_phy) { - if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { - scic_sds_phy_get_attached_sas_address(sci_phy, - sas_address); - } else { - scic_sds_phy_get_sas_address(sci_phy, sas_address); - sas_address->low += sci_phy->phy_index; - } - } else { - sas_address->high = 0; - sas_address->low = 0; - } -} - -/** - * scic_sds_port_construct_dummy_rnc() - create dummy rnc for si workaround - * - * @sci_port: logical port on which we need to create the remote node context - * @rni: remote node index for this remote node context. - * - * This routine will construct a dummy remote node context data structure - * This structure will be posted to the hardware to work around a scheduler - * error in the hardware. - */ -static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni) -{ - union scu_remote_node_context *rnc; - - rnc = &sci_port->owning_controller->remote_node_context_table[rni]; - - memset(rnc, 0, sizeof(union scu_remote_node_context)); - - rnc->ssp.remote_sas_address_hi = 0; - rnc->ssp.remote_sas_address_lo = 0; - - rnc->ssp.remote_node_index = rni; - rnc->ssp.remote_node_port_width = 1; - rnc->ssp.logical_port_index = sci_port->physical_port_index; - - rnc->ssp.nexus_loss_timer_enable = false; - rnc->ssp.check_bit = false; - rnc->ssp.is_valid = true; - rnc->ssp.is_remote_node_context = true; - rnc->ssp.function_number = 0; - rnc->ssp.arbitration_wait_time = 0; -} - -/** - * scic_sds_port_construct_dummy_task() - create dummy task for si workaround - * @sci_port The logical port on which we need to create the - * remote node context. - * context. - * @tci The remote node index for this remote node context. - * - * This routine will construct a dummy task context data structure. This - * structure will be posted to the hardwre to work around a scheduler error - * in the hardware. - * - */ -static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci) -{ - struct scu_task_context *task_context; - - task_context = scic_sds_controller_get_task_context_buffer(sci_port->owning_controller, tci); - - memset(task_context, 0, sizeof(struct scu_task_context)); - - task_context->abort = 0; - task_context->priority = 0; - task_context->initiator_request = 1; - task_context->connection_rate = 1; - task_context->protocol_engine_index = 0; - task_context->logical_port_index = sci_port->physical_port_index; - task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; - task_context->task_index = scic_sds_io_tag_get_index(tci); - task_context->valid = SCU_TASK_CONTEXT_VALID; - task_context->context_type = SCU_TASK_CONTEXT_TYPE; - - task_context->remote_node_index = sci_port->reserved_rni; - task_context->command_code = 0; - - task_context->link_layer_control = 0; - task_context->do_not_dma_ssp_good_response = 1; - task_context->strict_ordering = 0; - task_context->control_frame = 0; - task_context->timeout_enable = 0; - task_context->block_guard_enable = 0; - - task_context->address_modifier = 0; - - task_context->task_phase = 0x01; -} - -static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - - if (sci_port->reserved_tci != SCU_DUMMY_INDEX) - scic_controller_free_io_tag(scic, sci_port->reserved_tci); - - if (sci_port->reserved_rni != SCU_DUMMY_INDEX) - scic_sds_remote_node_table_release_remote_node_index(&scic->available_remote_nodes, - 1, sci_port->reserved_rni); - - sci_port->reserved_rni = SCU_DUMMY_INDEX; - sci_port->reserved_tci = SCU_DUMMY_INDEX; -} - -/** - * This method performs initialization of the supplied port. Initialization - * includes: - state machine initialization - member variable initialization - * - configuring the phy_mask - * @sci_port: - * @transport_layer_registers: - * @port_task_scheduler_registers: - * @port_configuration_regsiter: - * - * enum sci_status SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This value is returned - * if the phy being added to the port - */ -enum sci_status scic_sds_port_initialize( - struct scic_sds_port *sci_port, - void __iomem *port_task_scheduler_registers, - void __iomem *port_configuration_regsiter, - void __iomem *viit_registers) -{ - sci_port->port_task_scheduler_registers = port_task_scheduler_registers; - sci_port->port_pe_configuration_register = port_configuration_regsiter; - sci_port->viit_registers = viit_registers; - - return SCI_SUCCESS; -} - -/** - * scic_port_get_properties() - This method simply returns the properties - * regarding the port, such as: physical index, protocols, sas address, etc. - * @port: this parameter specifies the port for which to retrieve the physical - * index. - * @properties: This parameter specifies the properties structure into which to - * copy the requested information. - * - * Indicate if the user specified a valid port. SCI_SUCCESS This value is - * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This - * value is returned if the specified port is not valid. When this value is - * returned, no data is copied to the properties output parameter. - */ -enum sci_status scic_port_get_properties( - struct scic_sds_port *port, - struct scic_port_properties *prop) -{ - if ((port == NULL) || - (port->logical_port_index == SCIC_SDS_DUMMY_PORT)) - return SCI_FAILURE_INVALID_PORT; - - prop->index = port->logical_port_index; - prop->phy_mask = scic_sds_port_get_phys(port); - scic_sds_port_get_sas_address(port, &prop->local.sas_address); - scic_sds_port_get_protocols(port, &prop->local.protocols); - scic_sds_port_get_attached_sas_address(port, &prop->remote.sas_address); - - return SCI_SUCCESS; -} - -/** - * scic_port_hard_reset() - perform port hard reset - * @port: a handle corresponding to the SAS port to be hard reset. - * @reset_timeout: This parameter specifies the number of milliseconds in which - * the port reset operation should complete. - * - * The SCI User callback in scic_user_callbacks_t will only be called once for - * each phy in the SAS Port at completion of the hard reset sequence. Return a - * status indicating whether the hard reset started successfully. SCI_SUCCESS - * This value is returned if the hard reset operation started successfully. - */ -enum sci_status scic_port_hard_reset( - struct scic_sds_port *port, - u32 reset_timeout) -{ - return port->state_handlers->reset_handler( - port, reset_timeout); -} - -/** - * This method assigns the direct attached device ID for this port. - * - * @param[in] sci_port The port for which the direct attached device id is to - * be assigned. - * @param[in] device_id The direct attached device ID to assign to the port. - * This will be the RNi for the device - */ -void scic_sds_port_setup_transports( - struct scic_sds_port *sci_port, - u32 device_id) -{ - u8 index; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->active_phy_mask & (1 << index)) - scic_sds_phy_setup_transport(sci_port->phy_table[index], device_id); - } -} - -/** - * - * @sci_port: This is the port on which the phy should be enabled. - * @sci_phy: This is the specific phy which to enable. - * @do_notify_user: This parameter specifies whether to inform the user (via - * scic_cb_port_link_up()) as to the fact that a new phy as become ready. - * - * This function will activate the phy in the port. - * Activation includes: - adding - * the phy to the port - enabling the Protocol Engine in the silicon. - - * notifying the user that the link is up. none - */ -static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, - bool do_notify_user) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - - if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) - scic_sds_phy_resume(sci_phy); - - sci_port->active_phy_mask |= 1 << sci_phy->phy_index; - - scic_sds_controller_clear_invalid_phy(scic, sci_phy); - - if (do_notify_user == true) - isci_port_link_up(ihost, sci_port, sci_phy); -} - -void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, - bool do_notify_user) -{ - struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_port *iport = sci_port_to_iport(sci_port); - struct isci_host *ihost = scic_to_ihost(scic); - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); - - sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; - - /* Re-assign the phy back to the LP as if it were a narrow port */ - writel(sci_phy->phy_index, - &sci_port->port_pe_configuration_register[sci_phy->phy_index]); - - if (do_notify_user == true) - isci_port_link_down(ihost, iphy, iport); -} - -/** - * - * @sci_port: This is the port on which the phy should be disabled. - * @sci_phy: This is the specific phy which to disabled. - * - * This function will disable the phy and report that the phy is not valid for - * this port object. None - */ -static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - - /* - * Check to see if we have alreay reported this link as bad and if - * not go ahead and tell the SCI_USER that we have discovered an - * invalid link. - */ - if ((scic->invalid_phy_mask & (1 << sci_phy->phy_index)) == 0) { - scic_sds_controller_set_invalid_phy(scic, sci_phy); - dev_warn(&scic_to_ihost(scic)->pdev->dev, "Invalid link up!\n"); - } -} - -/** - * scic_sds_port_general_link_up_handler - phy can be assigned to port? - * @sci_port: scic_sds_port object for which has a phy that has gone link up. - * @sci_phy: This is the struct scic_sds_phy object that has gone link up. - * @do_notify_user: This parameter specifies whether to inform the user (via - * scic_cb_port_link_up()) as to the fact that a new phy as become ready. - * - * Determine if this phy can be assigned to this - * port . If the phy is not a valid PHY for - * this port then the function will notify the user. A PHY can only be - * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in - * the same port. none - */ -static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, - bool do_notify_user) -{ - struct sci_sas_address port_sas_address; - struct sci_sas_address phy_sas_address; - - scic_sds_port_get_attached_sas_address(sci_port, &port_sas_address); - scic_sds_phy_get_attached_sas_address(sci_phy, &phy_sas_address); - - /* If the SAS address of the new phy matches the SAS address of - * other phys in the port OR this is the first phy in the port, - * then activate the phy and allow it to be used for operations - * in this port. - */ - if ((phy_sas_address.high == port_sas_address.high && - phy_sas_address.low == port_sas_address.low) || - sci_port->active_phy_mask == 0) { - struct sci_base_state_machine *sm = &sci_port->state_machine; - - scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user); - if (sm->current_state_id == SCI_BASE_PORT_STATE_RESETTING) - sci_base_state_machine_change_state(sm, SCI_BASE_PORT_STATE_READY); - } else - scic_sds_port_invalid_link_up(sci_port, sci_phy); -} - - - -/** - * This method returns false if the port only has a single phy object assigned. - * If there are no phys or more than one phy then the method will return - * true. - * @sci_port: The port for which the wide port condition is to be checked. - * - * bool true Is returned if this is a wide ported port. false Is returned if - * this is a narrow port. - */ -static bool scic_sds_port_is_wide(struct scic_sds_port *sci_port) -{ - u32 index; - u32 phy_count = 0; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) { - phy_count++; - } - } - - return phy_count != 1; -} - -/** - * This method is called by the PHY object when the link is detected. if the - * port wants the PHY to continue on to the link up state then the port - * layer must return true. If the port object returns false the phy object - * must halt its attempt to go link up. - * @sci_port: The port associated with the phy object. - * @sci_phy: The phy object that is trying to go link up. - * - * true if the phy object can continue to the link up condition. true Is - * returned if this phy can continue to the ready state. false Is returned if - * can not continue on to the ready state. This notification is in place for - * wide ports and direct attached phys. Since there are no wide ported SATA - * devices this could become an invalid port configuration. - */ -bool scic_sds_port_link_detected( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - if ((sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) && - (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && - scic_sds_port_is_wide(sci_port)) { - scic_sds_port_invalid_link_up(sci_port, sci_phy); - - return false; - } - - return true; -} - -/** - * This method is the entry point for the phy to inform the port that it is now - * in a ready state - * @sci_port: - * - * - */ -void scic_sds_port_link_up( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - sci_phy->is_in_link_training = false; - - sci_port->state_handlers->link_up_handler(sci_port, sci_phy); -} - -/** - * This method is the entry point for the phy to inform the port that it is no - * longer in a ready state - * @sci_port: - * - * - */ -void scic_sds_port_link_down( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - sci_port->state_handlers->link_down_handler(sci_port, sci_phy); -} - -/** - * This method is called to start an IO request on this port. - * @sci_port: - * @sci_dev: - * @sci_req: - * - * enum sci_status - */ -enum sci_status scic_sds_port_start_io( - struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return sci_port->state_handlers->start_io_handler( - sci_port, sci_dev, sci_req); -} - -/** - * This method is called to complete an IO request to the port. - * @sci_port: - * @sci_dev: - * @sci_req: - * - * enum sci_status - */ -enum sci_status scic_sds_port_complete_io( - struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return sci_port->state_handlers->complete_io_handler( - sci_port, sci_dev, sci_req); -} - -/** - * This method is provided to timeout requests for port operations. Mostly its - * for the port reset operation. - * - * - */ -static void scic_sds_port_timeout_handler(void *port) -{ - struct scic_sds_port *sci_port = port; - u32 current_state; - - current_state = sci_base_state_machine_get_state( - &sci_port->state_machine); - - if (current_state == SCI_BASE_PORT_STATE_RESETTING) { - /* - * if the port is still in the resetting state then the - * timeout fired before the reset completed. - */ - sci_base_state_machine_change_state( - &sci_port->state_machine, - SCI_BASE_PORT_STATE_FAILED); - } else if (current_state == SCI_BASE_PORT_STATE_STOPPED) { - /* - * if the port is stopped then the start request failed - * In this case stay in the stopped state. - */ - dev_err(sciport_to_dev(sci_port), - "%s: SCIC Port 0x%p failed to stop before tiemout.\n", - __func__, - sci_port); - } else if (current_state == SCI_BASE_PORT_STATE_STOPPING) { - /* - * if the port is still stopping then the stop has not - * completed - */ - isci_port_stop_complete( - scic_sds_port_get_controller(sci_port), - sci_port, - SCI_FAILURE_TIMEOUT); - } else { - /* - * The port is in the ready state and we have a timer - * reporting a timeout this should not happen. - */ - dev_err(sciport_to_dev(sci_port), - "%s: SCIC Port 0x%p is processing a timeout operation " - "in state %d.\n", - __func__, - sci_port, - current_state); - } -} - -/* --------------------------------------------------------------------------- */ - -/** - * This function updates the hardwares VIIT entry for this port. - * - * - */ -static void scic_sds_port_update_viit_entry(struct scic_sds_port *sci_port) -{ - struct sci_sas_address sas_address; - - scic_sds_port_get_sas_address(sci_port, &sas_address); - - writel(sas_address.high, - &sci_port->viit_registers->initiator_sas_address_hi); - writel(sas_address.low, - &sci_port->viit_registers->initiator_sas_address_lo); - - /* This value get cleared just in case its not already cleared */ - writel(0, &sci_port->viit_registers->reserved); - - /* We are required to update the status register last */ - writel(SCU_VIIT_ENTRY_ID_VIIT | - SCU_VIIT_IPPT_INITIATOR | - ((1 << sci_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | - SCU_VIIT_STATUS_ALL_VALID, - &sci_port->viit_registers->status); -} - -/** - * This method returns the maximum allowed speed for data transfers on this - * port. This maximum allowed speed evaluates to the maximum speed of the - * slowest phy in the port. - * @sci_port: This parameter specifies the port for which to retrieve the - * maximum allowed speed. - * - * This method returns the maximum negotiated speed of the slowest phy in the - * port. - */ -enum sas_linkrate scic_sds_port_get_max_allowed_speed( - struct scic_sds_port *sci_port) -{ - u16 index; - enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS; - struct scic_sds_phy *phy = NULL; - - /* - * Loop through all of the phys in this port and find the phy with the - * lowest maximum link rate. */ - for (index = 0; index < SCI_MAX_PHYS; index++) { - phy = sci_port->phy_table[index]; - if ( - (phy != NULL) - && (scic_sds_port_active_phy(sci_port, phy) == true) - && (phy->max_negotiated_speed < max_allowed_speed) - ) - max_allowed_speed = phy->max_negotiated_speed; - } - - return max_allowed_speed; -} - - -/** - * This method passes the event to core user. - * @sci_port: The port that a BCN happens. - * @sci_phy: The phy that receives BCN. - * - */ -void scic_sds_port_broadcast_change_received( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - - /* notify the user. */ - isci_port_bc_change_received(ihost, sci_port, sci_phy); -} - - -/** - * This API methhod enables the broadcast change notification from underneath - * hardware. - * @sci_port: The port that a BCN had been disabled from. - * - */ -void scic_port_enable_broadcast_change_notification( - struct scic_sds_port *port) -{ - struct scic_sds_phy *phy; - u32 register_value; - u8 index; - - /* Loop through all of the phys to enable BCN. */ - for (index = 0; index < SCI_MAX_PHYS; index++) { - phy = port->phy_table[index]; - if (phy != NULL) { - register_value = - readl(&phy->link_layer_registers->link_layer_control); - - /* clear the bit by writing 1. */ - writel(register_value, - &phy->link_layer_registers->link_layer_control); - } - } -} - -/* - * **************************************************************************** - * * READY SUBSTATE HANDLERS - * **************************************************************************** */ - -/* - * This method is the general ready state stop handler for the struct scic_sds_port - * object. This function will transition the ready substate machine to its - * final state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_ready_substate_stop_handler( - struct scic_sds_port *port) -{ - sci_base_state_machine_change_state( - &port->state_machine, - SCI_BASE_PORT_STATE_STOPPING - ); - - return SCI_SUCCESS; -} - -/* - * This method is the general ready substate complete io handler for the - * struct scic_sds_port object. This function decrments the outstanding request count - * for this port object. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_ready_substate_complete_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - scic_sds_port_decrement_request_count(port); - - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_port_ready_substate_add_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - enum sci_status status; - - status = scic_sds_port_set_phy(port, phy); - - if (status == SCI_SUCCESS) { - scic_sds_port_general_link_up_handler(port, phy, true); - - port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; - - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); - } - - return status; -} - - -static enum sci_status scic_sds_port_ready_substate_remove_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - enum sci_status status; - - status = scic_sds_port_clear_phy(port, phy); - - if (status == SCI_SUCCESS) { - scic_sds_port_deactivate_phy(port, phy, true); - - port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; - - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); - } - - return status; -} - -/* - * **************************************************************************** - * * READY SUBSTATE WAITING HANDLERS - * **************************************************************************** */ - -/** - * - * @sci_port: This is the struct scic_sds_port object that which has a phy that has - * gone link up. - * @sci_phy: This is the struct scic_sds_phy object that has gone link up. - * - * This method is the ready waiting substate link up handler for the - * struct scic_sds_port object. This methos will report the link up condition for - * this port and will transition to the ready operational substate. none - */ -static void scic_sds_port_ready_waiting_substate_link_up_handler( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - /* - * Since this is the first phy going link up for the port we can just enable - * it and continue. */ - scic_sds_port_activate_phy(sci_port, sci_phy, true); - - sci_base_state_machine_change_state( - &sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL - ); -} - -/* - * This method is the ready waiting substate start io handler for the - * struct scic_sds_port object. The port object can not accept new requests so the - * request is failed. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - return SCI_FAILURE_INVALID_STATE; -} - -/* - * **************************************************************************** - * * READY SUBSTATE OPERATIONAL HANDLERS - * **************************************************************************** */ - -/* - * This method will casue the port to reset. enum sci_status SCI_SUCCESS - */ -static enum -sci_status scic_sds_port_ready_operational_substate_reset_handler( - struct scic_sds_port *port, - u32 timeout) -{ - enum sci_status status = SCI_FAILURE_INVALID_PHY; - u32 phy_index; - struct scic_sds_phy *selected_phy = NULL; - - - /* Select a phy on which we can send the hard reset request. */ - for (phy_index = 0; - (phy_index < SCI_MAX_PHYS) && (selected_phy == NULL); - phy_index++) { - selected_phy = port->phy_table[phy_index]; - - if ((selected_phy != NULL) && - !scic_sds_port_active_phy(port, selected_phy)) { - /* - * We found a phy but it is not ready select - * different phy - */ - selected_phy = NULL; - } - } - - /* If we have a phy then go ahead and start the reset procedure */ - if (selected_phy != NULL) { - status = scic_sds_phy_reset(selected_phy); - - if (status == SCI_SUCCESS) { - isci_timer_start(port->timer_handle, timeout); - port->not_ready_reason = - SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; - - sci_base_state_machine_change_state( - &port->state_machine, - SCI_BASE_PORT_STATE_RESETTING); - } - } - - return status; -} - -/** - * scic_sds_port_ready_operational_substate_link_up_handler() - - * @sci_port: This is the struct scic_sds_port object that which has a phy that has - * gone link up. - * @sci_phy: This is the struct scic_sds_phy object that has gone link up. - * - * This method is the ready operational substate link up handler for the - * struct scic_sds_port object. This function notifies the SCI User that the phy has - * gone link up. none - */ -static void scic_sds_port_ready_operational_substate_link_up_handler( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); -} - -/** - * scic_sds_port_ready_operational_substate_link_down_handler() - - * @sci_port: This is the struct scic_sds_port object that which has a phy that has - * gone link down. - * @sci_phy: This is the struct scic_sds_phy object that has gone link down. - * - * This method is the ready operational substate link down handler for the - * struct scic_sds_port object. This function notifies the SCI User that the phy has - * gone link down and if this is the last phy in the port the port will change - * state to the ready waiting substate. none - */ -static void scic_sds_port_ready_operational_substate_link_down_handler( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - scic_sds_port_deactivate_phy(sci_port, sci_phy, true); - - /* - * If there are no active phys left in the port, then transition - * the port to the WAITING state until such time as a phy goes - * link up. */ - if (sci_port->active_phy_mask == 0) - sci_base_state_machine_change_state(&sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); -} - -/* - * This method is the ready operational substate start io handler for the - * struct scic_sds_port object. This function incremetns the outstanding request - * count for this port object. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - port->started_request_count++; - return SCI_SUCCESS; -} - -/* - * **************************************************************************** - * * READY SUBSTATE OPERATIONAL HANDLERS - * **************************************************************************** */ - -/* - * This is the default method for a port add phy request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - enum sci_status status; - - status = scic_sds_port_set_phy(port, phy); - - if (status == SCI_SUCCESS) { - scic_sds_port_general_link_up_handler(port, phy, true); - - /* - * Re-enter the configuring state since this may be the last phy in - * the port. */ - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); - } - - return status; -} - -/* - * This is the default method for a port remove phy request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - enum sci_status status; - - status = scic_sds_port_clear_phy(port, phy); - - if (status == SCI_SUCCESS) { - scic_sds_port_deactivate_phy(port, phy, true); - - /* - * Re-enter the configuring state since this may be the last phy in - * the port. */ - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); - } - - return status; -} - -/** - * scic_sds_port_ready_configuring_substate_complete_io_handler() - - * @port: This is the port that is being requested to complete the io request. - * @device: This is the device on which the io is completing. - * - * This method will decrement the outstanding request count for this port. If - * the request count goes to 0 then the port can be reprogrammed with its new - * phy data. - */ -static enum sci_status -scic_sds_port_ready_configuring_substate_complete_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - scic_sds_port_decrement_request_count(port); - - if (port->started_request_count == 0) { - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL - ); - } - - return SCI_SUCCESS; -} - -static enum sci_status default_port_handler(struct scic_sds_port *sci_port, - const char *func) -{ - dev_warn(sciport_to_dev(sci_port), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&sci_port->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status -scic_sds_port_default_start_handler(struct scic_sds_port *sci_port) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status -scic_sds_port_default_stop_handler(struct scic_sds_port *sci_port) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status -scic_sds_port_default_destruct_handler(struct scic_sds_port *sci_port) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status -scic_sds_port_default_reset_handler(struct scic_sds_port *sci_port, - u32 timeout) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status -scic_sds_port_default_add_phy_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *base_phy) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status -scic_sds_port_default_remove_phy_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *base_phy) -{ - return default_port_handler(sci_port, __func__); -} - -/* - * This is the default method for a port unsolicited frame request. It will - * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even - * possible to receive an unsolicited frame directed to a port object? It - * seems possible if we implementing virtual functions but until then? - */ -static enum sci_status -scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port, - u32 frame_index) -{ - struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - - default_port_handler(sci_port, __func__); - scic_sds_controller_release_frame(scic, frame_index); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port, - u32 event_code) -{ - return default_port_handler(sci_port, __func__); -} - -static void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - default_port_handler(sci_port, __func__); -} - -static void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - default_port_handler(sci_port, __func__); -} - -static enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return default_port_handler(sci_port, __func__); -} - - - -static struct scic_sds_port_state_handler -scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = { - { - /* SCIC_SDS_PORT_READY_SUBSTATE_WAITING */ - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_ready_substate_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_ready_waiting_substate_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_ready_waiting_substate_start_io_handler, - scic_sds_port_ready_substate_complete_io_handler, - }, - - { - /* SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL */ - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_ready_operational_substate_reset_handler, - scic_sds_port_ready_substate_add_phy_handler, - scic_sds_port_ready_substate_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_ready_operational_substate_link_up_handler, - scic_sds_port_ready_operational_substate_link_down_handler, - scic_sds_port_ready_operational_substate_start_io_handler, - scic_sds_port_ready_substate_complete_io_handler, - }, - - { - /* SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING */ - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_ready_configuring_substate_add_phy_handler, - scic_sds_port_ready_configuring_substate_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_ready_configuring_substate_complete_io_handler - } -}; - -/** - * scic_sds_port_set_ready_state_handlers() - - * - * This macro sets the port ready substate handlers. - */ -#define scic_sds_port_set_ready_state_handlers(port, state_id) \ - scic_sds_port_set_state_handlers(\ - port, &scic_sds_port_ready_substate_handler_table[(state_id)] \ - ) - -/* - * ****************************************************************************** - * * PORT STATE PRIVATE METHODS - * ****************************************************************************** */ - -/** - * - * @sci_port: This is the struct scic_sds_port object to suspend. - * - * This method will susped the port task scheduler for this port object. none - */ -static void -scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port) -{ - u32 pts_control_value; - - pts_control_value = readl(&port->port_task_scheduler_registers->control); - pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); - writel(pts_control_value, &port->port_task_scheduler_registers->control); -} - -/** - * scic_sds_port_post_dummy_request() - post dummy/workaround request - * @sci_port: port to post task - * - * Prevent the hardware scheduler from posting new requests to the front - * of the scheduler queue causing a starvation problem for currently - * ongoing requests. - * - */ -static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) -{ - u32 command; - struct scu_task_context *task_context; - struct scic_sds_controller *scic = sci_port->owning_controller; - u16 tci = sci_port->reserved_tci; - - task_context = scic_sds_controller_get_task_context_buffer(scic, tci); - - task_context->abort = 0; - - command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | - tci; - - scic_sds_controller_post_request(scic, command); -} - -/** - * This routine will abort the dummy request. This will alow the hardware to - * power down parts of the silicon to save power. - * - * @sci_port: The port on which the task must be aborted. - * - */ -static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - u16 tci = sci_port->reserved_tci; - struct scu_task_context *tc; - u32 command; - - tc = scic_sds_controller_get_task_context_buffer(scic, tci); - - tc->abort = 1; - - command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT | - sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | - tci; - - scic_sds_controller_post_request(scic, command); -} - -/** - * - * @sci_port: This is the struct scic_sds_port object to resume. - * - * This method will resume the port task scheduler for this port object. none - */ -static void -scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) -{ - u32 pts_control_value; - - pts_control_value = readl(&port->port_task_scheduler_registers->control); - pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND); - writel(pts_control_value, &port->port_task_scheduler_registers->control); -} - -/* - * ****************************************************************************** - * * PORT READY SUBSTATE METHODS - * ****************************************************************************** */ - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCIC_SDS_PORT_READY_SUBSTATE_WAITING. This function checks the - * port for any ready phys. If there is at least one phy in a ready state then - * the port transitions to the ready operational substate. none - */ -static void scic_sds_port_ready_substate_waiting_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - - scic_sds_port_set_ready_state_handlers( - sci_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING - ); - - scic_sds_port_suspend_port_task_scheduler(sci_port); - - sci_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; - - if (sci_port->active_phy_mask != 0) { - /* At least one of the phys on the port is ready */ - sci_base_state_machine_change_state( - &sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL - ); - } -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This function will perform the actions required by the struct scic_sds_port - * on entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets - * the state handlers for the port object, notifies the SCI User that the port - * is ready, and resumes port operations. none - */ -static void scic_sds_port_ready_substate_operational_enter(void *object) -{ - u32 index; - struct scic_sds_port *sci_port = object; - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port_to_iport(sci_port); - - scic_sds_port_set_ready_state_handlers( - sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); - - isci_port_ready(ihost, iport); - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index]) { - writel(sci_port->physical_port_index, - &sci_port->port_pe_configuration_register[ - sci_port->phy_table[index]->phy_index]); - } - } - - scic_sds_port_update_viit_entry(sci_port); - - scic_sds_port_resume_port_task_scheduler(sci_port); - - /* - * Post the dummy task for the port so the hardware can schedule - * io correctly - */ - scic_sds_port_post_dummy_request(sci_port); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports - * the port not ready and suspends the port task scheduler. none - */ -static void scic_sds_port_ready_substate_operational_exit(void *object) -{ - struct scic_sds_port *sci_port = object; - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port_to_iport(sci_port); - - /* - * Kill the dummy task for this port if it has not yet posted - * the hardware will treat this as a NOP and just return abort - * complete. - */ - scic_sds_port_abort_dummy_request(sci_port); - - isci_port_not_ready(ihost, iport); -} - -/* - * ****************************************************************************** - * * PORT READY CONFIGURING METHODS - * ****************************************************************************** */ - -/** - * scic_sds_port_ready_substate_configuring_enter() - - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports - * the port not ready and suspends the port task scheduler. none - */ -static void scic_sds_port_ready_substate_configuring_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port_to_iport(sci_port); - - scic_sds_port_set_ready_state_handlers( - sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); - - if (sci_port->active_phy_mask == 0) { - isci_port_not_ready(ihost, iport); - - sci_base_state_machine_change_state( - &sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); - } else if (sci_port->started_request_count == 0) - sci_base_state_machine_change_state( - &sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); -} - -static void scic_sds_port_ready_substate_configuring_exit(void *object) -{ - struct scic_sds_port *sci_port = object; - - scic_sds_port_suspend_port_task_scheduler(sci_port); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_port_ready_substate_table[] = { - [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .enter_state = scic_sds_port_ready_substate_waiting_enter, - }, - [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .enter_state = scic_sds_port_ready_substate_operational_enter, - .exit_state = scic_sds_port_ready_substate_operational_exit - }, - [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .enter_state = scic_sds_port_ready_substate_configuring_enter, - .exit_state = scic_sds_port_ready_substate_configuring_exit - }, -}; - -/** - * - * @port: This is the struct scic_sds_port object on which the io request count will - * be decremented. - * @device: This is the struct scic_sds_remote_device object to which the io request - * is being directed. This parameter is not required to complete this - * operation. - * @io_request: This is the request that is being completed on this port - * object. This parameter is not required to complete this operation. - * - * This is a general complete io request handler for the struct scic_sds_port object. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_general_complete_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - scic_sds_port_decrement_request_count(port); - - return SCI_SUCCESS; -} - -/** - * scic_sds_port_stopped_state_start_handler() - stop a port from "started" - * - * @port: This is the struct scic_sds_port object which is cast into a - * struct scic_sds_port object. - * - * This function takes the struct scic_sds_port from a stopped state and - * attempts to start it. To start a port it must have no assiged devices and - * it must have at least one phy assigned to it. If those conditions are - * met then the port can transition to the ready state. - * enum sci_status - * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION - * This struct scic_sds_port object could not be started because the port - * configuration is not valid. - * SCI_SUCCESS - * the start request is successful and the struct scic_sds_port object - * has transitioned to the SCI_BASE_PORT_STATE_READY. - */ -static enum sci_status -scic_sds_port_stopped_state_start_handler(struct scic_sds_port *sci_port) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - enum sci_status status = SCI_SUCCESS; - u32 phy_mask; - - if (sci_port->assigned_device_count > 0) { - /* - * @todo This is a start failure operation because - * there are still devices assigned to this port. - * There must be no devices assigned to a port on a - * start operation. - */ - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - - sci_port->timer_handle = - isci_timer_create(ihost, - sci_port, - scic_sds_port_timeout_handler); - - if (!sci_port->timer_handle) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - - if (sci_port->reserved_rni == SCU_DUMMY_INDEX) { - u16 rni = scic_sds_remote_node_table_allocate_remote_node( - &scic->available_remote_nodes, 1); - - if (rni != SCU_DUMMY_INDEX) - scic_sds_port_construct_dummy_rnc(sci_port, rni); - else - status = SCI_FAILURE_INSUFFICIENT_RESOURCES; - sci_port->reserved_rni = rni; - } - - if (sci_port->reserved_tci == SCU_DUMMY_INDEX) { - /* Allocate a TCI and remove the sequence nibble */ - u16 tci = scic_controller_allocate_io_tag(scic); - - if (tci != SCU_DUMMY_INDEX) - scic_sds_port_construct_dummy_task(sci_port, tci); - else - status = SCI_FAILURE_INSUFFICIENT_RESOURCES; - sci_port->reserved_tci = tci; - } - - if (status == SCI_SUCCESS) { - phy_mask = scic_sds_port_get_phys(sci_port); - - /* - * There are one or more phys assigned to this port. Make sure - * the port's phy mask is in fact legal and supported by the - * silicon. - */ - if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { - sci_base_state_machine_change_state( - &sci_port->state_machine, - SCI_BASE_PORT_STATE_READY); - - return SCI_SUCCESS; - } else - status = SCI_FAILURE; - } - - if (status != SCI_SUCCESS) - scic_sds_port_destroy_dummy_resources(sci_port); - - return status; -} - -/* - * This method takes the struct scic_sds_port that is in a stopped state and handles a - * stop request. This function takes no action. enum sci_status SCI_SUCCESS the - * stop request is successful as the struct scic_sds_port object is already stopped. - */ -static enum sci_status scic_sds_port_stopped_state_stop_handler( - struct scic_sds_port *port) -{ - /* We are already stopped so there is nothing to do here */ - return SCI_SUCCESS; -} - -/* - * This method takes the struct scic_sds_port that is in a stopped state and handles - * the destruct request. The stopped state is the only state in which the - * struct scic_sds_port can be destroyed. This function causes the port object to - * transition to the SCI_BASE_PORT_STATE_FINAL. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_stopped_state_destruct_handler( - struct scic_sds_port *port) -{ - sci_base_state_machine_stop(&port->state_machine); - - return SCI_SUCCESS; -} - -/* - * This method takes the struct scic_sds_port that is in a stopped state and handles - * the add phy request. In MPC mode the only time a phy can be added to a port - * is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status - * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not - * be added to the port. SCI_SUCCESS if the phy is added to the port. - */ -static enum sci_status scic_sds_port_stopped_state_add_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - struct sci_sas_address port_sas_address; - - /* Read the port assigned SAS Address if there is one */ - scic_sds_port_get_sas_address(port, &port_sas_address); - - if (port_sas_address.high != 0 && port_sas_address.low != 0) { - struct sci_sas_address phy_sas_address; - - /* - * Make sure that the PHY SAS Address matches the SAS Address - * for this port. */ - scic_sds_phy_get_sas_address(phy, &phy_sas_address); - - if ( - (port_sas_address.high != phy_sas_address.high) - || (port_sas_address.low != phy_sas_address.low) - ) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - } - - return scic_sds_port_set_phy(port, phy); -} - -/* - * This method takes the struct scic_sds_port that is in a stopped state and handles - * the remove phy request. In MPC mode the only time a phy can be removed from - * a port is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status - * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not - * be added to the port. SCI_SUCCESS if the phy is added to the port. - */ -static enum sci_status scic_sds_port_stopped_state_remove_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - return scic_sds_port_clear_phy(port, phy); -} - -/* - * **************************************************************************** - * * READY STATE HANDLERS - * **************************************************************************** */ - -/* - * **************************************************************************** - * * RESETTING STATE HANDLERS - * **************************************************************************** */ - -/* - * **************************************************************************** - * * STOPPING STATE HANDLERS - * **************************************************************************** */ - -/* - * This method takes the struct scic_sds_port that is in a stopping state and handles - * the complete io request. Should the request count reach 0 then the port - * object will transition to the stopped state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_stopping_state_complete_io_handler( - struct scic_sds_port *sci_port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - scic_sds_port_decrement_request_count(sci_port); - - if (sci_port->started_request_count == 0) { - sci_base_state_machine_change_state(&sci_port->state_machine, - SCI_BASE_PORT_STATE_STOPPED); - } - - return SCI_SUCCESS; -} - -/* - * **************************************************************************** - * * RESETTING STATE HANDLERS - * **************************************************************************** */ - -/** - * - * @port: This is the port object which is being requested to stop. - * - * This method will stop a failed port. This causes a transition to the - * stopping state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_reset_state_stop_handler( - struct scic_sds_port *port) -{ - sci_base_state_machine_change_state( - &port->state_machine, - SCI_BASE_PORT_STATE_STOPPING - ); - - return SCI_SUCCESS; -} - -/* - * This method will transition a failed port to its ready state. The port - * failed because a hard reset request timed out but at some time later one or - * more phys in the port became ready. enum sci_status SCI_SUCCESS - */ -static void scic_sds_port_reset_state_link_up_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - /* - * / @todo We should make sure that the phy that has gone link up is the same - * / one on which we sent the reset. It is possible that the phy on - * / which we sent the reset is not the one that has gone link up and we - * / want to make sure that phy being reset comes back. Consider the - * / case where a reset is sent but before the hardware processes the - * / reset it get a link up on the port because of a hot plug event. - * / because of the reset request this phy will go link down almost - * / immediately. */ - - /* - * In the resetting state we don't notify the user regarding - * link up and link down notifications. */ - scic_sds_port_general_link_up_handler(port, phy, false); -} - -/* - * This method process link down notifications that occur during a port reset - * operation. Link downs can occur during the reset operation. enum sci_status - * SCI_SUCCESS - */ -static void scic_sds_port_reset_state_link_down_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - /* - * In the resetting state we don't notify the user regarding - * link up and link down notifications. */ - scic_sds_port_deactivate_phy(port, phy, false); -} - -static struct scic_sds_port_state_handler -scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = -{ - /* SCI_BASE_PORT_STATE_STOPPED */ - { - scic_sds_port_stopped_state_start_handler, - scic_sds_port_stopped_state_stop_handler, - scic_sds_port_stopped_state_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_stopped_state_add_phy_handler, - scic_sds_port_stopped_state_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_default_complete_io_handler - }, - /* SCI_BASE_PORT_STATE_STOPPING */ - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_stopping_state_complete_io_handler - }, - /* SCI_BASE_PORT_STATE_READY */ - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_general_complete_io_handler - }, - /* SCI_BASE_PORT_STATE_RESETTING */ - { - scic_sds_port_default_start_handler, - scic_sds_port_reset_state_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_reset_state_link_up_handler, - scic_sds_port_reset_state_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_general_complete_io_handler - }, - /* SCI_BASE_PORT_STATE_FAILED */ - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_general_complete_io_handler - } -}; - -/* - * ****************************************************************************** - * * PORT STATE PRIVATE METHODS - * ****************************************************************************** */ - -/** - * - * @sci_port: This is the port object which to suspend. - * - * This method will enable the SCU Port Task Scheduler for this port object but - * will leave the port task scheduler in a suspended state. none - */ -static void -scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port) -{ - u32 pts_control_value; - - pts_control_value = readl(&port->port_task_scheduler_registers->control); - pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); - writel(pts_control_value, &port->port_task_scheduler_registers->control); -} - -/** - * - * @sci_port: This is the port object which to resume. - * - * This method will disable the SCU port task scheduler for this port object. - * none - */ -static void -scic_sds_port_disable_port_task_scheduler(struct scic_sds_port *port) -{ - u32 pts_control_value; - - pts_control_value = readl(&port->port_task_scheduler_registers->control); - pts_control_value &= - ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND)); - writel(pts_control_value, &port->port_task_scheduler_registers->control); -} - -static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - u8 phys_index = sci_port->physical_port_index; - union scu_remote_node_context *rnc; - u16 rni = sci_port->reserved_rni; - u32 command; - - rnc = &scic->remote_node_context_table[rni]; - rnc->ssp.is_valid = true; - - command = SCU_CONTEXT_COMMAND_POST_RNC_32 | - phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - - scic_sds_controller_post_request(scic, command); - - /* ensure hardware has seen the post rnc command and give it - * ample time to act before sending the suspend - */ - readl(&scic->smu_registers->interrupt_status); /* flush */ - udelay(10); - - command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | - phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - - scic_sds_controller_post_request(scic, command); -} - -static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - u8 phys_index = sci_port->physical_port_index; - union scu_remote_node_context *rnc; - u16 rni = sci_port->reserved_rni; - u32 command; - - rnc = &scic->remote_node_context_table[rni]; - - rnc->ssp.is_valid = false; - - /* ensure the preceding tc abort request has reached the - * controller and give it ample time to act before posting the rnc - * invalidate - */ - readl(&scic->smu_registers->interrupt_status); /* flush */ - udelay(10); - - command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | - phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - - scic_sds_controller_post_request(scic, command); -} - -/* - * ****************************************************************************** - * * PORT STATE METHODS - * ****************************************************************************** */ - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_STOPPED. This function sets the stopped - * state handlers for the struct scic_sds_port object and disables the port task - * scheduler in the hardware. none - */ -static void scic_sds_port_stopped_state_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - - scic_sds_port_set_base_state_handlers( - sci_port, SCI_BASE_PORT_STATE_STOPPED - ); - - if ( - SCI_BASE_PORT_STATE_STOPPING - == sci_port->state_machine.previous_state_id - ) { - /* - * If we enter this state becasuse of a request to stop - * the port then we want to disable the hardwares port - * task scheduler. */ - scic_sds_port_disable_port_task_scheduler(sci_port); - } -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * exiting the SCI_BASE_STATE_STOPPED. This function enables the SCU hardware - * port task scheduler. none - */ -static void scic_sds_port_stopped_state_exit(void *object) -{ - struct scic_sds_port *sci_port = object; - - /* Enable and suspend the port task scheduler */ - scic_sds_port_enable_port_task_scheduler(sci_port); -} - -/** - * scic_sds_port_ready_state_enter - - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state - * handlers for the struct scic_sds_port object, reports the port object as - * not ready and starts the ready substate machine. none - */ -static void scic_sds_port_ready_state_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port_to_iport(sci_port); - u32 prev_state; - - /* Put the ready state handlers in place though they will not be there long */ - scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY); - - prev_state = sci_port->state_machine.previous_state_id; - if (prev_state == SCI_BASE_PORT_STATE_RESETTING) - isci_port_hard_reset_complete(iport, SCI_SUCCESS); - else - isci_port_not_ready(ihost, iport); - - /* Post and suspend the dummy remote node context for this port. */ - scic_sds_port_post_dummy_remote_node(sci_port); - - /* Start the ready substate machine */ - sci_base_state_machine_start(&sci_port->ready_substate_machine); -} - -static void scic_sds_port_ready_state_exit(void *object) -{ - struct scic_sds_port *sci_port = object; - - sci_base_state_machine_stop(&sci_port->ready_substate_machine); - scic_sds_port_invalidate_dummy_remote_node(sci_port); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_RESETTING. This function sets the resetting - * state handlers for the struct scic_sds_port object. none - */ -static void scic_sds_port_resetting_state_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - - scic_sds_port_set_base_state_handlers( - sci_port, SCI_BASE_PORT_STATE_RESETTING - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This function will perform the actions required by the - * struct scic_sds_port on - * exiting the SCI_BASE_STATE_RESETTING. This function does nothing. none - */ -static inline void scic_sds_port_resetting_state_exit(void *object) -{ - struct scic_sds_port *sci_port = object; - - isci_timer_stop(sci_port->timer_handle); -} - -/** - * - * @object: This is the void object which is cast to a - * struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping - * state handlers for the struct scic_sds_port object. none - */ -static void scic_sds_port_stopping_state_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - - scic_sds_port_set_base_state_handlers( - sci_port, SCI_BASE_PORT_STATE_STOPPING - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This function will perform the actions required by the - * struct scic_sds_port on - * exiting the SCI_BASE_STATE_STOPPING. This function does nothing. none - */ -static inline void -scic_sds_port_stopping_state_exit(void *object) -{ - struct scic_sds_port *sci_port = object; - - isci_timer_stop(sci_port->timer_handle); - - scic_sds_port_destroy_dummy_resources(sci_port); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This function will perform the actions required by the - * struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping - * state handlers for the struct scic_sds_port object. none - */ -static void scic_sds_port_failed_state_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - struct isci_port *iport = sci_port_to_iport(sci_port); - - scic_sds_port_set_base_state_handlers(sci_port, - SCI_BASE_PORT_STATE_FAILED); - - isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_port_state_table[] = { - [SCI_BASE_PORT_STATE_STOPPED] = { - .enter_state = scic_sds_port_stopped_state_enter, - .exit_state = scic_sds_port_stopped_state_exit - }, - [SCI_BASE_PORT_STATE_STOPPING] = { - .enter_state = scic_sds_port_stopping_state_enter, - .exit_state = scic_sds_port_stopping_state_exit - }, - [SCI_BASE_PORT_STATE_READY] = { - .enter_state = scic_sds_port_ready_state_enter, - .exit_state = scic_sds_port_ready_state_exit - }, - [SCI_BASE_PORT_STATE_RESETTING] = { - .enter_state = scic_sds_port_resetting_state_enter, - .exit_state = scic_sds_port_resetting_state_exit - }, - [SCI_BASE_PORT_STATE_FAILED] = { - .enter_state = scic_sds_port_failed_state_enter, - } -}; - -void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, - struct scic_sds_controller *scic) -{ - sci_base_state_machine_construct(&sci_port->state_machine, - sci_port, - scic_sds_port_state_table, - SCI_BASE_PORT_STATE_STOPPED); - - sci_base_state_machine_start(&sci_port->state_machine); - - sci_base_state_machine_construct(&sci_port->ready_substate_machine, - sci_port, - scic_sds_port_ready_substate_table, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); - - sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; - sci_port->physical_port_index = index; - sci_port->active_phy_mask = 0; - - sci_port->owning_controller = scic; - - sci_port->started_request_count = 0; - sci_port->assigned_device_count = 0; - - sci_port->reserved_rni = SCU_DUMMY_INDEX; - sci_port->reserved_tci = SCU_DUMMY_INDEX; - - sci_port->timer_handle = NULL; - sci_port->port_task_scheduler_registers = NULL; - - for (index = 0; index < SCI_MAX_PHYS; index++) - sci_port->phy_table[index] = NULL; -} diff --git a/drivers/scsi/isci/core/scic_sds_port.h b/drivers/scsi/isci/core/scic_sds_port.h deleted file mode 100644 index a351525..0000000 --- a/drivers/scsi/isci/core/scic_sds_port.h +++ /dev/null @@ -1,435 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PORT_H_ -#define _SCIC_SDS_PORT_H_ - -#include -#include "isci.h" -#include "sas.h" -#include "registers.h" -#include "state_machine.h" - -struct scic_sds_controller; -struct scic_sds_phy; -struct scic_sds_remote_device; -struct scic_sds_request; - -#define SCIC_SDS_DUMMY_PORT 0xFF - -/** - * enum SCIC_SDS_PORT_READY_SUBSTATES - - * - * This enumeration depicts all of the states for the core port ready substate - * machine. - */ -enum scic_sds_port_ready_substates { - /** - * The substate where the port is started and ready but has no - * active phys. - */ - SCIC_SDS_PORT_READY_SUBSTATE_WAITING, - - /** - * The substate where the port is started and ready and there is - * at least one phy operational. - */ - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL, - - /** - * The substate where the port is started and there was an - * add/remove phy event. This state is only used in Automatic - * Port Configuration Mode (APC) - */ - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING, - - SCIC_SDS_PORT_READY_MAX_SUBSTATES -}; - -/** - * enum scic_sds_port_states - This enumeration depicts all the states for the - * common port state machine. - * - * - */ -enum scic_sds_port_states { - /** - * This state indicates that the port has successfully been stopped. - * In this state no new IO operations are permitted. - * This state is entered from the STOPPING state. - */ - SCI_BASE_PORT_STATE_STOPPED, - - /** - * This state indicates that the port is in the process of stopping. - * In this state no new IO operations are permitted, but existing IO - * operations are allowed to complete. - * This state is entered from the READY state. - */ - SCI_BASE_PORT_STATE_STOPPING, - - /** - * This state indicates the port is now ready. Thus, the user is - * able to perform IO operations on this port. - * This state is entered from the STARTING state. - */ - SCI_BASE_PORT_STATE_READY, - - /** - * This state indicates the port is in the process of performing a hard - * reset. Thus, the user is unable to perform IO operations on this - * port. - * This state is entered from the READY state. - */ - SCI_BASE_PORT_STATE_RESETTING, - - /** - * This state indicates the port has failed a reset request. This state - * is entered when a port reset request times out. - * This state is entered from the RESETTING state. - */ - SCI_BASE_PORT_STATE_FAILED, - - SCI_BASE_PORT_MAX_STATES - -}; - -/** - * struct scic_sds_port - * - * The core port object provides the the abstraction for an SCU port. - */ -struct scic_sds_port { - - /** - * This field contains the information for the base port state machine. - */ - struct sci_base_state_machine state_machine; - - /** - * This field is the port index that is reported to the SCI USER. - * This allows the actual hardware physical port to change without - * the SCI USER getting a different answer for the get port index. - */ - u8 logical_port_index; - - /** - * This field is the port index used to program the SCU hardware. - */ - u8 physical_port_index; - - /** - * This field contains the active phy mask for the port. - * This mask is used in conjunction with the phy state to determine - * which phy to select for some port operations. - */ - u8 active_phy_mask; - - u16 reserved_rni; - u16 reserved_tci; - - /** - * This field contains the count of the io requests started on this port - * object. It is used to control controller shutdown. - */ - u32 started_request_count; - - /** - * This field contains the number of devices assigned to this port. - * It is used to control port start requests. - */ - u32 assigned_device_count; - - /** - * This field contains the reason for the port not going ready. It is - * assigned in the state handlers and used in the state transition. - */ - u32 not_ready_reason; - - /** - * This field is the table of phys assigned to the port. - */ - struct scic_sds_phy *phy_table[SCI_MAX_PHYS]; - - /** - * This field is a pointer back to the controller that owns this - * port object. - */ - struct scic_sds_controller *owning_controller; - - /** - * This field contains the port start/stop timer handle. - */ - void *timer_handle; - - /** - * This field points to the current set of state handlers for this port - * object. These state handlers are assigned at each enter state of - * the state machine. - */ - struct scic_sds_port_state_handler *state_handlers; - - /** - * This field is the ready substate machine for the port. - */ - struct sci_base_state_machine ready_substate_machine; - - /* / Memory mapped hardware register space */ - - /** - * This field is the pointer to the port task scheduler registers - * for the SCU hardware. - */ - struct scu_port_task_scheduler_registers __iomem - *port_task_scheduler_registers; - - /** - * This field is identical for all port objects and points to the port - * task scheduler group PE configuration registers. - * It is used to assign PEs to a port. - */ - u32 __iomem *port_pe_configuration_register; - - /** - * This field is the VIIT register space for ths port object. - */ - struct scu_viit_entry __iomem *viit_registers; - -}; - -typedef enum sci_status (*scic_sds_port_handler_t)(struct scic_sds_port *); - -typedef enum sci_status (*scic_sds_port_phy_handler_t)(struct scic_sds_port *, - struct scic_sds_phy *); - -typedef enum sci_status (*scic_sds_port_reset_handler_t)(struct scic_sds_port *, - u32 timeout); - -typedef enum sci_status (*scic_sds_port_event_handler_t)(struct scic_sds_port *, u32); - -typedef enum sci_status (*scic_sds_port_frame_handler_t)(struct scic_sds_port *, u32); - -typedef void (*scic_sds_port_link_handler_t)(struct scic_sds_port *, struct scic_sds_phy *); - -typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_port *, - struct scic_sds_remote_device *, - struct scic_sds_request *); - -struct scic_sds_port_state_handler { - /** - * The start_handler specifies the method invoked when a user - * attempts to start a port. - */ - scic_sds_port_handler_t start_handler; - - /** - * The stop_handler specifies the method invoked when a user - * attempts to stop a port. - */ - scic_sds_port_handler_t stop_handler; - - /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a port. - */ - scic_sds_port_handler_t destruct_handler; - - /** - * The reset_handler specifies the method invoked when a user - * attempts to hard reset a port. - */ - scic_sds_port_reset_handler_t reset_handler; - - /** - * The add_phy_handler specifies the method invoked when a user - * attempts to add another phy into the port. - */ - scic_sds_port_phy_handler_t add_phy_handler; - - /** - * The remove_phy_handler specifies the method invoked when a user - * attempts to remove a phy from the port. - */ - scic_sds_port_phy_handler_t remove_phy_handler; - - scic_sds_port_frame_handler_t frame_handler; - scic_sds_port_event_handler_t event_handler; - - scic_sds_port_link_handler_t link_up_handler; - scic_sds_port_link_handler_t link_down_handler; - - scic_sds_port_io_request_handler_t start_io_handler; - scic_sds_port_io_request_handler_t complete_io_handler; - -}; - -/** - * scic_sds_port_get_controller() - - * - * Helper macro to get the owning controller of this port - */ -#define scic_sds_port_get_controller(this_port) \ - ((this_port)->owning_controller) - -/** - * scic_sds_port_set_base_state_handlers() - - * - * This macro will change the state handlers to those of the specified state id - */ -#define scic_sds_port_set_base_state_handlers(this_port, state_id) \ - scic_sds_port_set_state_handlers(\ - (this_port), &scic_sds_port_state_handler_table[(state_id)]) - -/** - * scic_sds_port_set_state_handlers() - - * - * Helper macro to set the port object state handlers - */ -#define scic_sds_port_set_state_handlers(this_port, handlers) \ - ((this_port)->state_handlers = (handlers)) - -/** - * scic_sds_port_get_index() - - * - * This macro returns the physical port index for this port object - */ -#define scic_sds_port_get_index(this_port) \ - ((this_port)->physical_port_index) - - -static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port) -{ - if (WARN_ONCE(sci_port->started_request_count == 0, - "%s: tried to decrement started_request_count past 0!?", - __func__)) - /* pass */; - else - sci_port->started_request_count--; -} - -#define scic_sds_port_active_phy(port, phy) \ - (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) - -void scic_sds_port_construct( - struct scic_sds_port *sci_port, - u8 port_index, - struct scic_sds_controller *scic); - -enum sci_status scic_sds_port_initialize( - struct scic_sds_port *sci_port, - void __iomem *port_task_scheduler_registers, - void __iomem *port_configuration_regsiter, - void __iomem *viit_registers); - -enum sci_status scic_sds_port_add_phy( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -enum sci_status scic_sds_port_remove_phy( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -void scic_sds_port_setup_transports( - struct scic_sds_port *sci_port, - u32 device_id); - - -void scic_sds_port_deactivate_phy( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, - bool do_notify_user); - -bool scic_sds_port_link_detected( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -void scic_sds_port_link_up( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -void scic_sds_port_link_down( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -enum sci_status scic_sds_port_start_io( - struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req); - -enum sci_status scic_sds_port_complete_io( - struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req); - -enum sas_linkrate scic_sds_port_get_max_allowed_speed( - struct scic_sds_port *sci_port); - -void scic_sds_port_broadcast_change_received( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -bool scic_sds_port_is_valid_phy_assignment( - struct scic_sds_port *sci_port, - u32 phy_index); - -void scic_sds_port_get_sas_address( - struct scic_sds_port *sci_port, - struct sci_sas_address *sas_address); - -void scic_sds_port_get_attached_sas_address( - struct scic_sds_port *sci_port, - struct sci_sas_address *sas_address); - -#endif /* _SCIC_SDS_PORT_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c deleted file mode 100644 index a5871fd..0000000 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.c +++ /dev/null @@ -1,827 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "host.h" -#include "scic_sds_port_configuration_agent.h" -#include "timers.h" - -#define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) -#define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) -#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100) - -enum SCIC_SDS_APC_ACTIVITY { - SCIC_SDS_APC_SKIP_PHY, - SCIC_SDS_APC_ADD_PHY, - SCIC_SDS_APC_START_TIMER, - - SCIC_SDS_APC_ACTIVITY_MAX -}; - -/* - * ****************************************************************************** - * General port configuration agent routines - * ****************************************************************************** */ - -/** - * - * @address_one: A SAS Address to be compared. - * @address_two: A SAS Address to be compared. - * - * Compare the two SAS Address and if SAS Address One is greater than SAS - * Address Two then return > 0 else if SAS Address One is less than SAS Address - * Two return < 0 Otherwise they are the same return 0 A signed value of x > 0 - * > y where x is returned for Address One > Address Two y is returned for - * Address One < Address Two 0 is returned ofr Address One = Address Two - */ -static s32 sci_sas_address_compare( - struct sci_sas_address address_one, - struct sci_sas_address address_two) -{ - if (address_one.high > address_two.high) { - return 1; - } else if (address_one.high < address_two.high) { - return -1; - } else if (address_one.low > address_two.low) { - return 1; - } else if (address_one.low < address_two.low) { - return -1; - } - - /* The two SAS Address must be identical */ - return 0; -} - -/** - * - * @controller: The controller object used for the port search. - * @phy: The phy object to match. - * - * This routine will find a matching port for the phy. This means that the - * port and phy both have the same broadcast sas address and same received sas - * address. The port address or the NULL if there is no matching - * port. port address if the port can be found to match the phy. - * NULL if there is no matching port for the phy. - */ -static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( - struct scic_sds_controller *scic, - struct scic_sds_phy *phy) -{ - u8 i; - struct sci_sas_address port_sas_address; - struct sci_sas_address port_attached_device_address; - struct sci_sas_address phy_sas_address; - struct sci_sas_address phy_attached_device_address; - - /* - * Since this phy can be a member of a wide port check to see if one or - * more phys match the sent and received SAS address as this phy in which - * case it should participate in the same port. - */ - scic_sds_phy_get_sas_address(phy, &phy_sas_address); - scic_sds_phy_get_attached_sas_address(phy, &phy_attached_device_address); - - for (i = 0; i < scic->logical_port_entries; i++) { - struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_port *sci_port = &ihost->ports[i].sci; - - scic_sds_port_get_sas_address(sci_port, &port_sas_address); - scic_sds_port_get_attached_sas_address(sci_port, &port_attached_device_address); - - if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && - sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) - return sci_port; - } - - return NULL; -} - -/** - * - * @controller: This is the controller object that contains the port agent - * @port_agent: This is the port configruation agent for the controller. - * - * This routine will validate the port configuration is correct for the SCU - * hardware. The SCU hardware allows for port configurations as follows. LP0 - * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2, - * PE3) LP3 -> (PE3) enum sci_status SCI_SUCCESS the port configuration is valid for - * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION - * the port configuration is not valid for this port configuration agent. - */ -static enum sci_status scic_sds_port_configuration_agent_validate_ports( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent) -{ - struct isci_host *ihost = scic_to_ihost(controller); - struct sci_sas_address first_address; - struct sci_sas_address second_address; - - /* - * Sanity check the max ranges for all the phys the max index - * is always equal to the port range index */ - if (port_agent->phy_valid_port_range[0].max_index != 0 || - port_agent->phy_valid_port_range[1].max_index != 1 || - port_agent->phy_valid_port_range[2].max_index != 2 || - port_agent->phy_valid_port_range[3].max_index != 3) - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - - /* - * This is a request to configure a single x4 port or at least attempt - * to make all the phys into a single port */ - if (port_agent->phy_valid_port_range[0].min_index == 0 && - port_agent->phy_valid_port_range[1].min_index == 0 && - port_agent->phy_valid_port_range[2].min_index == 0 && - port_agent->phy_valid_port_range[3].min_index == 0) - return SCI_SUCCESS; - - /* - * This is a degenerate case where phy 1 and phy 2 are assigned - * to the same port this is explicitly disallowed by the hardware - * unless they are part of the same x4 port and this condition was - * already checked above. */ - if (port_agent->phy_valid_port_range[2].min_index == 1) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - - /* - * PE0 and PE3 can never have the same SAS Address unless they - * are part of the same x4 wide port and we have already checked - * for this condition. */ - scic_sds_phy_get_sas_address(&ihost->phys[0].sci, &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[3].sci, &second_address); - - if (sci_sas_address_compare(first_address, second_address) == 0) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - - /* - * PE0 and PE1 are configured into a 2x1 ports make sure that the - * SAS Address for PE0 and PE2 are different since they can not be - * part of the same port. */ - if (port_agent->phy_valid_port_range[0].min_index == 0 && - port_agent->phy_valid_port_range[1].min_index == 1) { - scic_sds_phy_get_sas_address(&ihost->phys[0].sci, &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[2].sci, &second_address); - - if (sci_sas_address_compare(first_address, second_address) == 0) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - } - - /* - * PE2 and PE3 are configured into a 2x1 ports make sure that the - * SAS Address for PE1 and PE3 are different since they can not be - * part of the same port. */ - if (port_agent->phy_valid_port_range[2].min_index == 2 && - port_agent->phy_valid_port_range[3].min_index == 3) { - scic_sds_phy_get_sas_address(&ihost->phys[1].sci, &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[3].sci, &second_address); - - if (sci_sas_address_compare(first_address, second_address) == 0) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - } - - return SCI_SUCCESS; -} - -/* - * ****************************************************************************** - * Manual port configuration agent routines - * ****************************************************************************** */ - -/** - * - * - * This routine will verify that all of the phys in the same port are using the - * same SAS address. - */ -static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent) -{ - struct isci_host *ihost = scic_to_ihost(controller); - u32 phy_mask; - u32 assigned_phy_mask; - struct sci_sas_address sas_address; - struct sci_sas_address phy_assigned_address; - u8 port_index; - u8 phy_index; - - assigned_phy_mask = 0; - sas_address.high = 0; - sas_address.low = 0; - - for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { - phy_mask = controller->oem_parameters.sds1.ports[port_index].phy_mask; - - if (!phy_mask) - continue; - /* - * Make sure that one or more of the phys were not already assinged to - * a different port. */ - if ((phy_mask & ~assigned_phy_mask) == 0) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - - /* Find the starting phy index for this round through the loop */ - for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { - if ((phy_mask & (1 << phy_index)) == 0) - continue; - scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, - &sas_address); - - /* - * The phy_index can be used as the starting point for the - * port range since the hardware starts all logical ports - * the same as the PE index. */ - port_agent->phy_valid_port_range[phy_index].min_index = port_index; - port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - - if (phy_index != port_index) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - - break; - } - - /* - * See how many additional phys are being added to this logical port. - * Note: We have not moved the current phy_index so we will actually - * compare the startting phy with itself. - * This is expected and required to add the phy to the port. */ - while (phy_index < SCI_MAX_PHYS) { - if ((phy_mask & (1 << phy_index)) == 0) - continue; - scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, - &phy_assigned_address); - - if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { - /* - * The phy mask specified that this phy is part of the same port - * as the starting phy and it is not so fail this configuration */ - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - - port_agent->phy_valid_port_range[phy_index].min_index = port_index; - port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - - scic_sds_port_add_phy(&ihost->ports[port_index].sci, - &ihost->phys[phy_index].sci); - - assigned_phy_mask |= (1 << phy_index); - } - - phy_index++; - } - - return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); -} - -/** - * - * - * This timer routine is used to allow the SCI User to rediscover or change - * device objects before a new series of link up notifications because a link - * down has allowed a better port configuration. - */ -static void scic_sds_mpc_agent_timeout_handler(void *object) -{ - u8 index; - struct scic_sds_controller *scic = object; - struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_port_configuration_agent *port_agent = &scic->port_agent; - u16 configure_phy_mask; - - port_agent->timer_pending = false; - - /* Find the mask of phys that are reported read but as yet unconfigured into a port */ - configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - struct scic_sds_phy *sci_phy = &ihost->phys[index].sci; - - if (configure_phy_mask & (1 << index)) { - port_agent->link_up_handler(scic, port_agent, - scic_sds_phy_get_port(sci_phy), - sci_phy); - } - } -} - -/** - * - * @controller: This is the controller object that receives the link up - * notification. - * @port: This is the port object associated with the phy. If the is no - * associated port this is an NULL. - * @phy: This is the phy object which has gone ready. - * - * This method handles the manual port configuration link up notifications. - * Since all ports and phys are associate at initialization time we just turn - * around and notifiy the port object that there is a link up. If this PHY is - * not associated with a port there is no action taken. Is it possible to get a - * link up notification from a phy that has no assocoated port? - */ -static void scic_sds_mpc_agent_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - /* - * If the port has an invalid handle then the phy was not assigned to - * a port. This is because the phy was not given the same SAS Address - * as the other PHYs in the port. */ - if (port != NULL) { - port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy)); - - scic_sds_port_link_up(port, phy); - - if ((port->active_phy_mask & (1 << scic_sds_phy_get_index(phy))) != 0) { - port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(phy)); - } - } -} - -/** - * - * @controller: This is the controller object that receives the link down - * notification. - * @port: This is the port object associated with the phy. If the is no - * associated port this is an NULL. The port is an invalid - * handle only if the phy was never port of this port. This happens when - * the phy is not broadcasting the same SAS address as the other phys in the - * assigned port. - * @phy: This is the phy object which has gone link down. - * - * This function handles the manual port configuration link down notifications. - * Since all ports and phys are associated at initialization time we just turn - * around and notifiy the port object of the link down event. If this PHY is - * not associated with a port there is no action taken. Is it possible to get a - * link down notification from a phy that has no assocoated port? - */ -static void scic_sds_mpc_agent_link_down( - struct scic_sds_controller *scic, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - if (sci_port != NULL) { - /* - * If we can form a new port from the remainder of the phys - * then we want to start the timer to allow the SCI User to - * cleanup old devices and rediscover the port before - * rebuilding the port with the phys that remain in the ready - * state. - */ - port_agent->phy_ready_mask &= - ~(1 << scic_sds_phy_get_index(sci_phy)); - port_agent->phy_configured_mask &= - ~(1 << scic_sds_phy_get_index(sci_phy)); - - /* - * Check to see if there are more phys waiting to be - * configured into a port. If there are allow the SCI User - * to tear down this port, if necessary, and then reconstruct - * the port after the timeout. - */ - if ((port_agent->phy_configured_mask == 0x0000) && - (port_agent->phy_ready_mask != 0x0000) && - !port_agent->timer_pending) { - port_agent->timer_pending = true; - - isci_timer_start(port_agent->timer, - SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); - } - - scic_sds_port_link_down(sci_port, sci_phy); - } -} - -/* - * ****************************************************************************** - * Automatic port configuration agent routines - * ****************************************************************************** */ - -/** - * - * - * This routine will verify that the phys are assigned a valid SAS address for - * automatic port configuration mode. - */ -static enum sci_status scic_sds_apc_agent_validate_phy_configuration( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent) -{ - u8 phy_index; - u8 port_index; - struct sci_sas_address sas_address; - struct sci_sas_address phy_assigned_address; - struct isci_host *ihost = scic_to_ihost(controller); - - phy_index = 0; - - while (phy_index < SCI_MAX_PHYS) { - port_index = phy_index; - - /* Get the assigned SAS Address for the first PHY on the controller. */ - scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, - &sas_address); - - while (++phy_index < SCI_MAX_PHYS) { - scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, - &phy_assigned_address); - - /* Verify each of the SAS address are all the same for every PHY */ - if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) { - port_agent->phy_valid_port_range[phy_index].min_index = port_index; - port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - } else { - port_agent->phy_valid_port_range[phy_index].min_index = phy_index; - port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - break; - } - } - } - - return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); -} - -/** - * - * @controller: This is the controller that to which the port agent is assigned. - * @port_agent: This is the port agent that is requesting the timer start - * operation. - * @phy: This is the phy that has caused the timer operation to be scheduled. - * - * This routine will restart the automatic port configuration timeout timer for - * the next time period. This could be caused by either a link down event or a - * link up event where we can not yet tell to which port a phy belongs. - */ -static inline void scic_sds_apc_agent_start_timer( - struct scic_sds_controller *scic, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_phy *sci_phy, - u32 timeout) -{ - if (port_agent->timer_pending) - isci_timer_stop(port_agent->timer); - - port_agent->timer_pending = true; - - isci_timer_start(port_agent->timer, timeout); -} - -/** - * - * @controller: This is the controller object that receives the link up - * notification. - * @phy: This is the phy object which has gone link up. - * - * This method handles the automatic port configuration for link up - * notifications. - */ -static void scic_sds_apc_agent_configure_ports( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_phy *phy, - bool start_timer) -{ - u8 port_index; - enum sci_status status; - struct scic_sds_port *port; - enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; - struct isci_host *ihost = scic_to_ihost(controller); - - port = scic_sds_port_configuration_agent_find_port(controller, phy); - - if (port != NULL) { - if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) - apc_activity = SCIC_SDS_APC_ADD_PHY; - else - apc_activity = SCIC_SDS_APC_SKIP_PHY; - } else { - /* - * There is no matching Port for this PHY so lets search through the - * Ports and see if we can add the PHY to its own port or maybe start - * the timer and wait to see if a wider port can be made. - * - * Note the break when we reach the condition of the port id == phy id */ - for ( - port_index = port_agent->phy_valid_port_range[phy->phy_index].min_index; - port_index <= port_agent->phy_valid_port_range[phy->phy_index].max_index; - port_index++ - ) { - - port = &ihost->ports[port_index].sci; - - /* First we must make sure that this PHY can be added to this Port. */ - if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) { - /* - * Port contains a PHY with a greater PHY ID than the current - * PHY that has gone link up. This phy can not be part of any - * port so skip it and move on. */ - if (port->active_phy_mask > (1 << phy->phy_index)) { - apc_activity = SCIC_SDS_APC_SKIP_PHY; - break; - } - - /* - * We have reached the end of our Port list and have not found - * any reason why we should not either add the PHY to the port - * or wait for more phys to become active. */ - if (port->physical_port_index == phy->phy_index) { - /* - * The Port either has no active PHYs. - * Consider that if the port had any active PHYs we would have - * or active PHYs with - * a lower PHY Id than this PHY. */ - if (apc_activity != SCIC_SDS_APC_START_TIMER) { - apc_activity = SCIC_SDS_APC_ADD_PHY; - } - - break; - } - - /* - * The current Port has no active PHYs and this PHY could be part - * of this Port. Since we dont know as yet setup to start the - * timer and see if there is a better configuration. */ - if (port->active_phy_mask == 0) { - apc_activity = SCIC_SDS_APC_START_TIMER; - } - } else if (port->active_phy_mask != 0) { - /* - * The Port has an active phy and the current Phy can not - * participate in this port so skip the PHY and see if - * there is a better configuration. */ - apc_activity = SCIC_SDS_APC_SKIP_PHY; - } - } - } - - /* - * Check to see if the start timer operations should instead map to an - * add phy operation. This is caused because we have been waiting to - * add a phy to a port but could not becuase the automatic port - * configuration engine had a choice of possible ports for the phy. - * Since we have gone through a timeout we are going to restrict the - * choice to the smallest possible port. */ - if ( - (start_timer == false) - && (apc_activity == SCIC_SDS_APC_START_TIMER) - ) { - apc_activity = SCIC_SDS_APC_ADD_PHY; - } - - switch (apc_activity) { - case SCIC_SDS_APC_ADD_PHY: - status = scic_sds_port_add_phy(port, phy); - - if (status == SCI_SUCCESS) { - port_agent->phy_configured_mask |= (1 << phy->phy_index); - } - break; - - case SCIC_SDS_APC_START_TIMER: - scic_sds_apc_agent_start_timer( - controller, port_agent, phy, SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION - ); - break; - - case SCIC_SDS_APC_SKIP_PHY: - default: - /* do nothing the PHY can not be made part of a port at this time. */ - break; - } -} - -/** - * scic_sds_apc_agent_link_up - handle apc link up events - * @scic: This is the controller object that receives the link up - * notification. - * @sci_port: This is the port object associated with the phy. If the is no - * associated port this is an NULL. - * @sci_phy: This is the phy object which has gone link up. - * - * This method handles the automatic port configuration for link up - * notifications. Is it possible to get a link down notification from a phy - * that has no assocoated port? - */ -static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - u8 phy_index = sci_phy->phy_index; - - if (!sci_port) { - /* the phy is not the part of this port */ - port_agent->phy_ready_mask |= 1 << phy_index; - scic_sds_apc_agent_configure_ports(scic, port_agent, sci_phy, true); - } else { - /* the phy is already the part of the port */ - u32 port_state = sci_port->state_machine.current_state_id; - - /* if the PORT'S state is resetting then the link up is from - * port hard reset in this case, we need to tell the port - * that link up is recieved - */ - BUG_ON(port_state != SCI_BASE_PORT_STATE_RESETTING); - port_agent->phy_ready_mask |= 1 << phy_index; - scic_sds_port_link_up(sci_port, sci_phy); - } -} - -/** - * - * @controller: This is the controller object that receives the link down - * notification. - * @port: This is the port object associated with the phy. If the is no - * associated port this is an NULL. - * @phy: This is the phy object which has gone link down. - * - * This method handles the automatic port configuration link down - * notifications. not associated with a port there is no action taken. Is it - * possible to get a link down notification from a phy that has no assocoated - * port? - */ -static void scic_sds_apc_agent_link_down( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy)); - - if (port != NULL) { - if (port_agent->phy_configured_mask & (1 << phy->phy_index)) { - enum sci_status status; - - status = scic_sds_port_remove_phy(port, phy); - - if (status == SCI_SUCCESS) { - port_agent->phy_configured_mask &= ~(1 << phy->phy_index); - } - } - } -} - -/* configure the phys into ports when the timer fires */ -static void scic_sds_apc_agent_timeout_handler(void *object) -{ - u32 index; - struct scic_sds_port_configuration_agent *port_agent; - struct scic_sds_controller *scic = object; - struct isci_host *ihost = scic_to_ihost(scic); - u16 configure_phy_mask; - - port_agent = scic_sds_controller_get_port_configuration_agent(scic); - - port_agent->timer_pending = false; - - configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; - - if (!configure_phy_mask) - return; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if ((configure_phy_mask & (1 << index)) == 0) - continue; - - scic_sds_apc_agent_configure_ports(scic, port_agent, - &ihost->phys[index].sci, false); - } -} - -/* - * ****************************************************************************** - * Public port configuration agent routines - * ****************************************************************************** */ - -/** - * - * - * This method will construct the port configuration agent for operation. This - * call is universal for both manual port configuration and automatic port - * configuration modes. - */ -void scic_sds_port_configuration_agent_construct( - struct scic_sds_port_configuration_agent *port_agent) -{ - u32 index; - - port_agent->phy_configured_mask = 0x00; - port_agent->phy_ready_mask = 0x00; - - port_agent->link_up_handler = NULL; - port_agent->link_down_handler = NULL; - - port_agent->timer_pending = false; - port_agent->timer = NULL; - - for (index = 0; index < SCI_MAX_PORTS; index++) { - port_agent->phy_valid_port_range[index].min_index = 0; - port_agent->phy_valid_port_range[index].max_index = 0; - } -} - -enum sci_status scic_sds_port_configuration_agent_initialize( - struct scic_sds_controller *scic, - struct scic_sds_port_configuration_agent *port_agent) -{ - enum sci_status status = SCI_SUCCESS; - enum scic_port_configuration_mode mode; - struct isci_host *ihost = scic_to_ihost(scic); - - mode = scic->oem_parameters.sds1.controller.mode_type; - - if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - status = scic_sds_mpc_agent_validate_phy_configuration( - scic, port_agent); - - port_agent->link_up_handler = scic_sds_mpc_agent_link_up; - port_agent->link_down_handler = scic_sds_mpc_agent_link_down; - - port_agent->timer = isci_timer_create( - ihost, - scic, - scic_sds_mpc_agent_timeout_handler); - } else { - status = scic_sds_apc_agent_validate_phy_configuration( - scic, port_agent); - - port_agent->link_up_handler = scic_sds_apc_agent_link_up; - port_agent->link_down_handler = scic_sds_apc_agent_link_down; - - port_agent->timer = isci_timer_create( - ihost, - scic, - scic_sds_apc_agent_timeout_handler); - } - - /* Make sure we have actually gotten a timer */ - if ((status == SCI_SUCCESS) && (port_agent->timer == NULL)) { - dev_err(scic_to_dev(scic), - "%s: Controller 0x%p automatic port configuration " - "agent could not get timer.\n", - __func__, - scic); - - status = SCI_FAILURE; - } - - return status; -} diff --git a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h b/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h deleted file mode 100644 index 7fd1617..0000000 --- a/drivers/scsi/isci/core/scic_sds_port_configuration_agent.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_PORT_CONFIGURATION_AGENT_H_ -#define _SCIC_SDS_PORT_CONFIGURATION_AGENT_H_ - -/** - * This file contains the structures, constants and prototypes used for the - * core controller automatic port configuration engine. - * - * - */ - -#include "scic_sds_port.h" - -struct scic_sds_controller; -struct scic_sds_port_configuration_agent; -struct scic_sds_port; -struct scic_sds_phy; - -typedef void (*scic_sds_port_configuration_agent_phy_handler_t)( - struct scic_sds_controller *, - struct scic_sds_port_configuration_agent *, - struct scic_sds_port *, - struct scic_sds_phy * - ); - -struct SCIC_SDS_PORT_RANGE { - u8 min_index; - u8 max_index; -}; - -struct scic_sds_port_configuration_agent { - u16 phy_configured_mask; - u16 phy_ready_mask; - - struct SCIC_SDS_PORT_RANGE phy_valid_port_range[SCI_MAX_PHYS]; - - bool timer_pending; - - scic_sds_port_configuration_agent_phy_handler_t link_up_handler; - scic_sds_port_configuration_agent_phy_handler_t link_down_handler; - - void *timer; - -}; - -void scic_sds_port_configuration_agent_construct( - struct scic_sds_port_configuration_agent *port_agent); - -enum sci_status scic_sds_port_configuration_agent_initialize( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent); - -#endif /* _SCIC_SDS_PORT_CONFIGURATION_AGENT_H_ */ diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index e1930da..2bb9f10 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -61,7 +61,6 @@ #include "probe_roms.h" #include "remote_device.h" #include "request.h" -#include "scic_sds_port_configuration_agent.h" #include "scu_completion_codes.h" #include "scu_event_codes.h" #include "registers.h" diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 9c5d121..784e135 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -55,7 +55,6 @@ #ifndef _SCI_HOST_H_ #define _SCI_HOST_H_ -#include "scic_config_parameters.h" #include "remote_device.h" #include "phy.h" #include "pool.h" @@ -64,11 +63,12 @@ #include "registers.h" #include "scu_unsolicited_frame.h" #include "unsolicited_frame_control.h" -#include "scic_sds_port_configuration_agent.h" +#include "probe_roms.h" struct scic_sds_request; struct scu_task_context; + /** * struct scic_power_control - * @@ -107,6 +107,24 @@ struct scic_power_control { }; +struct scic_sds_port_configuration_agent; +typedef void (*port_config_fn)(struct scic_sds_controller *, + struct scic_sds_port_configuration_agent *, + struct scic_sds_port *, struct scic_sds_phy *); + +struct scic_sds_port_configuration_agent { + u16 phy_configured_mask; + u16 phy_ready_mask; + struct { + u8 min_index; + u8 max_index; + } phy_valid_port_range[SCI_MAX_PHYS]; + bool timer_pending; + port_config_fn link_up_handler; + port_config_fn link_down_handler; + void *timer; +}; + /** * struct scic_sds_controller - * @@ -800,4 +818,11 @@ u16 scic_controller_allocate_io_tag( enum sci_status scic_controller_free_io_tag( struct scic_sds_controller *scic, u16 io_tag); + +void scic_sds_port_configuration_agent_construct( + struct scic_sds_port_configuration_agent *port_agent); + +enum sci_status scic_sds_port_configuration_agent_initialize( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent); #endif diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index b92d51f..0f64605 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -57,9 +57,8 @@ #include "host.h" #include "phy.h" #include "scu_event_codes.h" -#include "scic_port.h" -#include "scic_config_parameters.h" #include "timers.h" +#include "probe_roms.h" /* Maximum arbitration wait time in micro-seconds */ #define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 093fd47..f180036 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -58,6 +58,7 @@ #include #include #include "state_machine.h" +#include "sas.h" /* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS * before restarting the starting state machine. Technically, the old parallel diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 321935d..dbff283 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -53,11 +53,13 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include #include "isci.h" -#include "scic_port.h" #include "port.h" #include "request.h" +#include "timers.h" + +#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) +#define SCU_DUMMY_INDEX (0xFFFF) static void isci_port_change_state(struct isci_port *iport, enum isci_status status) { @@ -73,44 +75,87 @@ static void isci_port_change_state(struct isci_port *iport, enum isci_status sta spin_unlock_irqrestore(&iport->state_lock, flags); } -void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) +/* + * This function will indicate which protocols are supported by this port. + * @sci_port: a handle corresponding to the SAS port for which to return the + * supported protocols. + * @protocols: This parameter specifies a pointer to a data structure + * which the core will copy the protocol values for the port from the + * transmit_identification register. + */ +static void +scic_sds_port_get_protocols(struct scic_sds_port *sci_port, + struct scic_phy_proto *protocols) { - INIT_LIST_HEAD(&iport->remote_dev_list); - INIT_LIST_HEAD(&iport->domain_dev_list); - spin_lock_init(&iport->state_lock); - init_completion(&iport->start_complete); - iport->isci_host = ihost; - isci_port_change_state(iport, isci_freed); + u8 index; + + protocols->all = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (sci_port->phy_table[index] != NULL) { + scic_sds_phy_get_protocols(sci_port->phy_table[index], + protocols); + } + } } /** - * isci_port_get_state() - This function gets the status of the port object. - * @isci_port: This parameter points to the isci_port object + * This method requests a list (mask) of the phys contained in the supplied SAS + * port. + * @sci_port: a handle corresponding to the SAS port for which to return the + * phy mask. * - * status of the object as a isci_status enum. + * Return a bit mask indicating which phys are a part of this port. Each bit + * corresponds to a phy identifier (e.g. bit 0 = phy id 0). */ -enum isci_status isci_port_get_state( - struct isci_port *isci_port) +static u32 scic_sds_port_get_phys(struct scic_sds_port *sci_port) { - return isci_port->status; + u32 index; + u32 mask; + + mask = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (sci_port->phy_table[index] != NULL) { + mask |= (1 << index); + } + } + + return mask; } -void isci_port_bc_change_received(struct isci_host *ihost, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) +/** + * scic_port_get_properties() - This method simply returns the properties + * regarding the port, such as: physical index, protocols, sas address, etc. + * @port: this parameter specifies the port for which to retrieve the physical + * index. + * @properties: This parameter specifies the properties structure into which to + * copy the requested information. + * + * Indicate if the user specified a valid port. SCI_SUCCESS This value is + * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This + * value is returned if the specified port is not valid. When this value is + * returned, no data is copied to the properties output parameter. + */ +static enum sci_status scic_port_get_properties(struct scic_sds_port *port, + struct scic_port_properties *prop) { - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + if ((port == NULL) || + (port->logical_port_index == SCIC_SDS_DUMMY_PORT)) + return SCI_FAILURE_INVALID_PORT; - dev_dbg(&ihost->pdev->dev, "%s: iphy = %p, sas_phy = %p\n", - __func__, iphy, &iphy->sas_phy); + prop->index = port->logical_port_index; + prop->phy_mask = scic_sds_port_get_phys(port); + scic_sds_port_get_sas_address(port, &prop->local.sas_address); + scic_sds_port_get_protocols(port, &prop->local.protocols); + scic_sds_port_get_attached_sas_address(port, &prop->remote.sas_address); - ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD); - scic_port_enable_broadcast_change_notification(sci_port); + return SCI_SUCCESS; } -void isci_port_link_up(struct isci_host *isci_host, - struct scic_sds_port *port, - struct scic_sds_phy *phy) +static void isci_port_link_up(struct isci_host *isci_host, + struct scic_sds_port *port, + struct scic_sds_phy *phy) { unsigned long flags; struct scic_port_properties properties; @@ -184,8 +229,9 @@ void isci_port_link_up(struct isci_host *isci_host, * @port: This parameter specifies the isci port with the active link. * */ -void isci_port_link_down(struct isci_host *isci_host, struct isci_phy *isci_phy, - struct isci_port *isci_port) +static void isci_port_link_down(struct isci_host *isci_host, + struct isci_phy *isci_phy, + struct isci_port *isci_port) { struct isci_remote_device *isci_device; @@ -231,37 +277,13 @@ void isci_port_link_down(struct isci_host *isci_host, struct isci_phy *isci_phy, /** - * isci_port_deformed() - This function is called by libsas when a port becomes - * inactive. - * @phy: This parameter specifies the libsas phy with the inactive port. - * - */ -void isci_port_deformed( - struct asd_sas_phy *phy) -{ - pr_debug("%s: sas_phy = %p\n", __func__, phy); -} - -/** - * isci_port_formed() - This function is called by libsas when a port becomes - * active. - * @phy: This parameter specifies the libsas phy with the active port. - * - */ -void isci_port_formed( - struct asd_sas_phy *phy) -{ - pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port); -} - -/** * isci_port_ready() - This function is called by the sci core when a link * becomes ready. * @isci_host: This parameter specifies the isci host object. * @port: This parameter specifies the sci port with the active link. * */ -void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port) +static void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port) { dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p\n", __func__, isci_port); @@ -279,12 +301,19 @@ void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port) * @port: This parameter specifies the sci port with the active link. * */ -void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port) +static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port) { dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p\n", __func__, isci_port); } +static void isci_port_stop_complete(struct scic_sds_controller *scic, + struct scic_sds_port *sci_port, + enum sci_status completion_status) +{ + dev_dbg(&scic_to_ihost(scic)->pdev->dev, "Port stop complete\n"); +} + /** * isci_port_hard_reset_complete() - This function is called by the sci core * when the hard reset complete notification has been received. @@ -293,8 +322,8 @@ void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_por * process. * */ -void isci_port_hard_reset_complete(struct isci_port *isci_port, - enum sci_status completion_status) +static void isci_port_hard_reset_complete(struct isci_port *isci_port, + enum sci_status completion_status) { dev_dbg(&isci_port->isci_host->pdev->dev, "%s: isci_port = %p, completion_status=%x\n", @@ -306,62 +335,2364 @@ void isci_port_hard_reset_complete(struct isci_port *isci_port, complete_all(&isci_port->hard_reset_complete); } -int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, - struct isci_phy *iphy) +/* This method will return a true value if the specified phy can be assigned to + * this port The following is a list of phys for each port that are allowed: - + * Port 0 - 3 2 1 0 - Port 1 - 1 - Port 2 - 3 2 - Port 3 - 3 This method + * doesn't preclude all configurations. It merely ensures that a phy is part + * of the allowable set of phy identifiers for that port. For example, one + * could assign phy 3 to port 0 and no other phys. Please refer to + * scic_sds_port_is_phy_mask_valid() for information regarding whether the + * phy_mask for a port can be supported. bool true if this is a valid phy + * assignment for the port false if this is not a valid phy assignment for the + * port + */ +bool scic_sds_port_is_valid_phy_assignment(struct scic_sds_port *sci_port, + u32 phy_index) { - unsigned long flags; - enum sci_status status; - int ret = TMF_RESP_FUNC_COMPLETE; + /* Initialize to invalid value. */ + u32 existing_phy_index = SCI_MAX_PHYS; + u32 index; - dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n", - __func__, iport); + if ((sci_port->physical_port_index == 1) && (phy_index != 1)) { + return false; + } - init_completion(&iport->hard_reset_complete); + if (sci_port->physical_port_index == 3 && phy_index != 3) { + return false; + } - spin_lock_irqsave(&ihost->scic_lock, flags); + if ( + (sci_port->physical_port_index == 2) + && ((phy_index == 0) || (phy_index == 1)) + ) { + return false; + } - #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT - status = scic_port_hard_reset(&iport->sci, ISCI_PORT_RESET_TIMEOUT); + for (index = 0; index < SCI_MAX_PHYS; index++) { + if ((sci_port->phy_table[index] != NULL) + && (index != phy_index)) { + existing_phy_index = index; + } + } - spin_unlock_irqrestore(&ihost->scic_lock, flags); + /* + * Ensure that all of the phys in the port are capable of + * operating at the same maximum link rate. */ + if ( + (existing_phy_index < SCI_MAX_PHYS) + && (sci_port->owning_controller->user_parameters.sds1.phys[ + phy_index].max_speed_generation != + sci_port->owning_controller->user_parameters.sds1.phys[ + existing_phy_index].max_speed_generation) + ) + return false; - if (status == SCI_SUCCESS) { - wait_for_completion(&iport->hard_reset_complete); + return true; +} - dev_dbg(&ihost->pdev->dev, - "%s: iport = %p; hard reset completion\n", - __func__, iport); +/** + * + * @sci_port: This is the port object for which to determine if the phy mask + * can be supported. + * + * This method will return a true value if the port's phy mask can be supported + * by the SCU. The following is a list of valid PHY mask configurations for + * each port: - Port 0 - [[3 2] 1] 0 - Port 1 - [1] - Port 2 - [[3] 2] + * - Port 3 - [3] This method returns a boolean indication specifying if the + * phy mask can be supported. true if this is a valid phy assignment for the + * port false if this is not a valid phy assignment for the port + */ +static bool scic_sds_port_is_phy_mask_valid( + struct scic_sds_port *sci_port, + u32 phy_mask) +{ + if (sci_port->physical_port_index == 0) { + if (((phy_mask & 0x0F) == 0x0F) + || ((phy_mask & 0x03) == 0x03) + || ((phy_mask & 0x01) == 0x01) + || (phy_mask == 0)) + return true; + } else if (sci_port->physical_port_index == 1) { + if (((phy_mask & 0x02) == 0x02) + || (phy_mask == 0)) + return true; + } else if (sci_port->physical_port_index == 2) { + if (((phy_mask & 0x0C) == 0x0C) + || ((phy_mask & 0x04) == 0x04) + || (phy_mask == 0)) + return true; + } else if (sci_port->physical_port_index == 3) { + if (((phy_mask & 0x08) == 0x08) + || (phy_mask == 0)) + return true; + } - if (iport->hard_reset_status != SCI_SUCCESS) - ret = TMF_RESP_FUNC_FAILED; - } else { - ret = TMF_RESP_FUNC_FAILED; + return false; +} - dev_err(&ihost->pdev->dev, - "%s: iport = %p; scic_port_hard_reset call" - " failed 0x%x\n", - __func__, iport, status); +/** + * + * @sci_port: This parameter specifies the port from which to return a + * connected phy. + * + * This method retrieves a currently active (i.e. connected) phy contained in + * the port. Currently, the lowest order phy that is connected is returned. + * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is + * returned if there are no currently active (i.e. connected to a remote end + * point) phys contained in the port. All other values specify a struct scic_sds_phy + * object that is active in the port. + */ +static struct scic_sds_phy *scic_sds_port_get_a_connected_phy( + struct scic_sds_port *sci_port + ) { + u32 index; + struct scic_sds_phy *phy; + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* + * Ensure that the phy is both part of the port and currently + * connected to the remote end-point. */ + phy = sci_port->phy_table[index]; + if ( + (phy != NULL) + && scic_sds_port_active_phy(sci_port, phy) + ) { + return phy; + } } - /* If the hard reset for the port has failed, consider this - * the same as link failures on all phys in the port. + return NULL; +} + +/** + * scic_sds_port_set_phy() - + * @out]: port The port object to which the phy assignement is being made. + * @out]: phy The phy which is being assigned to the port. + * + * This method attempts to make the assignment of the phy to the port. If + * successful the phy is assigned to the ports phy table. bool true if the phy + * assignment can be made. false if the phy assignement can not be made. This + * is a functional test that only fails if the phy is currently assigned to a + * different port. + */ +static enum sci_status scic_sds_port_set_phy( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + /* + * Check to see if we can add this phy to a port + * that means that the phy is not part of a port and that the port does + * not already have a phy assinged to the phy index. */ + if ( + (port->phy_table[phy->phy_index] == NULL) + && (scic_sds_phy_get_port(phy) == NULL) + && scic_sds_port_is_valid_phy_assignment(port, phy->phy_index) + ) { + /* + * Phy is being added in the stopped state so we are in MPC mode + * make logical port index = physical port index */ + port->logical_port_index = port->physical_port_index; + port->phy_table[phy->phy_index] = phy; + scic_sds_phy_set_port(phy, port); + + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +/** + * scic_sds_port_clear_phy() - + * @out]: port The port from which the phy is being cleared. + * @out]: phy The phy being cleared from the port. + * + * This method will clear the phy assigned to this port. This method fails if + * this phy is not currently assinged to this port. bool true if the phy is + * removed from the port. false if this phy is not assined to this port. + */ +static enum sci_status scic_sds_port_clear_phy( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + /* Make sure that this phy is part of this port */ + if (port->phy_table[phy->phy_index] == phy && + scic_sds_phy_get_port(phy) == port) { + struct scic_sds_controller *scic = port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + + /* Yep it is assigned to this port so remove it */ + scic_sds_phy_set_port(phy, &ihost->ports[SCI_MAX_PORTS].sci); + port->phy_table[phy->phy_index] = NULL; + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +/** + * scic_sds_port_add_phy() - + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. + * + * This method will add a PHY to the selected port. This method returns an + * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other status + * is failre to add the phy to the port. + */ +enum sci_status scic_sds_port_add_phy( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + return sci_port->state_handlers->add_phy_handler( + sci_port, sci_phy); +} + + +/** + * scic_sds_port_remove_phy() - + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. + * + * This method will remove the PHY from the selected PORT. This method returns + * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any other + * status is failre to add the phy to the port. + */ +enum sci_status scic_sds_port_remove_phy( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + return sci_port->state_handlers->remove_phy_handler( + sci_port, sci_phy); +} + +/** + * This method requests the SAS address for the supplied SAS port from the SCI + * implementation. + * @sci_port: a handle corresponding to the SAS port for which to return the + * SAS address. + * @sas_address: This parameter specifies a pointer to a SAS address structure + * into which the core will copy the SAS address for the port. + * + */ +void scic_sds_port_get_sas_address( + struct scic_sds_port *sci_port, + struct sci_sas_address *sas_address) +{ + u32 index; + + sas_address->high = 0; + sas_address->low = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (sci_port->phy_table[index] != NULL) { + scic_sds_phy_get_sas_address(sci_port->phy_table[index], sas_address); + } + } +} + +/* + * This function requests the SAS address for the device directly attached to + * this SAS port. + * @sci_port: a handle corresponding to the SAS port for which to return the + * SAS address. + * @sas_address: This parameter specifies a pointer to a SAS address structure + * into which the core will copy the SAS address for the device directly + * attached to the port. + * + */ +void scic_sds_port_get_attached_sas_address( + struct scic_sds_port *sci_port, + struct sci_sas_address *sas_address) +{ + struct scic_sds_phy *sci_phy; + + /* + * Ensure that the phy is both part of the port and currently + * connected to the remote end-point. */ - if (ret != TMF_RESP_FUNC_COMPLETE) { - dev_err(&ihost->pdev->dev, - "%s: iport = %p; hard reset failed " - "(0x%x) - sending link down to libsas for phy %p\n", - __func__, iport, iport->hard_reset_status, iphy); + sci_phy = scic_sds_port_get_a_connected_phy(sci_port); + if (sci_phy) { + if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { + scic_sds_phy_get_attached_sas_address(sci_phy, + sas_address); + } else { + scic_sds_phy_get_sas_address(sci_phy, sas_address); + sas_address->low += sci_phy->phy_index; + } + } else { + sas_address->high = 0; + sas_address->low = 0; + } +} - isci_port_link_down(ihost, iphy, iport); +/** + * scic_sds_port_construct_dummy_rnc() - create dummy rnc for si workaround + * + * @sci_port: logical port on which we need to create the remote node context + * @rni: remote node index for this remote node context. + * + * This routine will construct a dummy remote node context data structure + * This structure will be posted to the hardware to work around a scheduler + * error in the hardware. + */ +static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni) +{ + union scu_remote_node_context *rnc; + + rnc = &sci_port->owning_controller->remote_node_context_table[rni]; + + memset(rnc, 0, sizeof(union scu_remote_node_context)); + + rnc->ssp.remote_sas_address_hi = 0; + rnc->ssp.remote_sas_address_lo = 0; + + rnc->ssp.remote_node_index = rni; + rnc->ssp.remote_node_port_width = 1; + rnc->ssp.logical_port_index = sci_port->physical_port_index; + + rnc->ssp.nexus_loss_timer_enable = false; + rnc->ssp.check_bit = false; + rnc->ssp.is_valid = true; + rnc->ssp.is_remote_node_context = true; + rnc->ssp.function_number = 0; + rnc->ssp.arbitration_wait_time = 0; +} + +/** + * scic_sds_port_construct_dummy_task() - create dummy task for si workaround + * @sci_port The logical port on which we need to create the + * remote node context. + * context. + * @tci The remote node index for this remote node context. + * + * This routine will construct a dummy task context data structure. This + * structure will be posted to the hardwre to work around a scheduler error + * in the hardware. + * + */ +static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci) +{ + struct scu_task_context *task_context; + + task_context = scic_sds_controller_get_task_context_buffer(sci_port->owning_controller, tci); + + memset(task_context, 0, sizeof(struct scu_task_context)); + + task_context->abort = 0; + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = 1; + task_context->protocol_engine_index = 0; + task_context->logical_port_index = sci_port->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->task_index = scic_sds_io_tag_get_index(tci); + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = sci_port->reserved_rni; + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + + task_context->task_phase = 0x01; +} + +static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + + if (sci_port->reserved_tci != SCU_DUMMY_INDEX) + scic_controller_free_io_tag(scic, sci_port->reserved_tci); + + if (sci_port->reserved_rni != SCU_DUMMY_INDEX) + scic_sds_remote_node_table_release_remote_node_index(&scic->available_remote_nodes, + 1, sci_port->reserved_rni); + + sci_port->reserved_rni = SCU_DUMMY_INDEX; + sci_port->reserved_tci = SCU_DUMMY_INDEX; +} + +/** + * This method performs initialization of the supplied port. Initialization + * includes: - state machine initialization - member variable initialization + * - configuring the phy_mask + * @sci_port: + * @transport_layer_registers: + * @port_task_scheduler_registers: + * @port_configuration_regsiter: + * + * enum sci_status SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This value is returned + * if the phy being added to the port + */ +enum sci_status scic_sds_port_initialize( + struct scic_sds_port *sci_port, + void __iomem *port_task_scheduler_registers, + void __iomem *port_configuration_regsiter, + void __iomem *viit_registers) +{ + sci_port->port_task_scheduler_registers = port_task_scheduler_registers; + sci_port->port_pe_configuration_register = port_configuration_regsiter; + sci_port->viit_registers = viit_registers; + + return SCI_SUCCESS; +} + +/** + * scic_port_hard_reset() - perform port hard reset + * @port: a handle corresponding to the SAS port to be hard reset. + * @reset_timeout: This parameter specifies the number of milliseconds in which + * the port reset operation should complete. + * + * The SCI User callback in scic_user_callbacks_t will only be called once for + * each phy in the SAS Port at completion of the hard reset sequence. Return a + * status indicating whether the hard reset started successfully. SCI_SUCCESS + * This value is returned if the hard reset operation started successfully. + */ +static enum sci_status scic_port_hard_reset(struct scic_sds_port *port, + u32 reset_timeout) +{ + return port->state_handlers->reset_handler( + port, reset_timeout); +} + +/** + * This method assigns the direct attached device ID for this port. + * + * @param[in] sci_port The port for which the direct attached device id is to + * be assigned. + * @param[in] device_id The direct attached device ID to assign to the port. + * This will be the RNi for the device + */ +void scic_sds_port_setup_transports( + struct scic_sds_port *sci_port, + u32 device_id) +{ + u8 index; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (sci_port->active_phy_mask & (1 << index)) + scic_sds_phy_setup_transport(sci_port->phy_table[index], device_id); } +} - return ret; +/** + * + * @sci_port: This is the port on which the phy should be enabled. + * @sci_phy: This is the specific phy which to enable. + * @do_notify_user: This parameter specifies whether to inform the user (via + * scic_cb_port_link_up()) as to the fact that a new phy as become ready. + * + * This function will activate the phy in the port. + * Activation includes: - adding + * the phy to the port - enabling the Protocol Engine in the silicon. - + * notifying the user that the link is up. none + */ +static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, + bool do_notify_user) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + + if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) + scic_sds_phy_resume(sci_phy); + + sci_port->active_phy_mask |= 1 << sci_phy->phy_index; + + scic_sds_controller_clear_invalid_phy(scic, sci_phy); + + if (do_notify_user == true) + isci_port_link_up(ihost, sci_port, sci_phy); } -void isci_port_stop_complete(struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, - enum sci_status completion_status) +void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, + bool do_notify_user) { - dev_dbg(&scic_to_ihost(scic)->pdev->dev, "Port stop complete\n"); + struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); + struct isci_port *iport = sci_port_to_iport(sci_port); + struct isci_host *ihost = scic_to_ihost(scic); + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); + + sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + + /* Re-assign the phy back to the LP as if it were a narrow port */ + writel(sci_phy->phy_index, + &sci_port->port_pe_configuration_register[sci_phy->phy_index]); + + if (do_notify_user == true) + isci_port_link_down(ihost, iphy, iport); +} + +/** + * + * @sci_port: This is the port on which the phy should be disabled. + * @sci_phy: This is the specific phy which to disabled. + * + * This function will disable the phy and report that the phy is not valid for + * this port object. None + */ +static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + + /* + * Check to see if we have alreay reported this link as bad and if + * not go ahead and tell the SCI_USER that we have discovered an + * invalid link. + */ + if ((scic->invalid_phy_mask & (1 << sci_phy->phy_index)) == 0) { + scic_sds_controller_set_invalid_phy(scic, sci_phy); + dev_warn(&scic_to_ihost(scic)->pdev->dev, "Invalid link up!\n"); + } +} + +/** + * scic_sds_port_general_link_up_handler - phy can be assigned to port? + * @sci_port: scic_sds_port object for which has a phy that has gone link up. + * @sci_phy: This is the struct scic_sds_phy object that has gone link up. + * @do_notify_user: This parameter specifies whether to inform the user (via + * scic_cb_port_link_up()) as to the fact that a new phy as become ready. + * + * Determine if this phy can be assigned to this + * port . If the phy is not a valid PHY for + * this port then the function will notify the user. A PHY can only be + * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in + * the same port. none + */ +static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, + bool do_notify_user) +{ + struct sci_sas_address port_sas_address; + struct sci_sas_address phy_sas_address; + + scic_sds_port_get_attached_sas_address(sci_port, &port_sas_address); + scic_sds_phy_get_attached_sas_address(sci_phy, &phy_sas_address); + + /* If the SAS address of the new phy matches the SAS address of + * other phys in the port OR this is the first phy in the port, + * then activate the phy and allow it to be used for operations + * in this port. + */ + if ((phy_sas_address.high == port_sas_address.high && + phy_sas_address.low == port_sas_address.low) || + sci_port->active_phy_mask == 0) { + struct sci_base_state_machine *sm = &sci_port->state_machine; + + scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user); + if (sm->current_state_id == SCI_BASE_PORT_STATE_RESETTING) + sci_base_state_machine_change_state(sm, SCI_BASE_PORT_STATE_READY); + } else + scic_sds_port_invalid_link_up(sci_port, sci_phy); +} + + + +/** + * This method returns false if the port only has a single phy object assigned. + * If there are no phys or more than one phy then the method will return + * true. + * @sci_port: The port for which the wide port condition is to be checked. + * + * bool true Is returned if this is a wide ported port. false Is returned if + * this is a narrow port. + */ +static bool scic_sds_port_is_wide(struct scic_sds_port *sci_port) +{ + u32 index; + u32 phy_count = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (sci_port->phy_table[index] != NULL) { + phy_count++; + } + } + + return phy_count != 1; +} + +/** + * This method is called by the PHY object when the link is detected. if the + * port wants the PHY to continue on to the link up state then the port + * layer must return true. If the port object returns false the phy object + * must halt its attempt to go link up. + * @sci_port: The port associated with the phy object. + * @sci_phy: The phy object that is trying to go link up. + * + * true if the phy object can continue to the link up condition. true Is + * returned if this phy can continue to the ready state. false Is returned if + * can not continue on to the ready state. This notification is in place for + * wide ports and direct attached phys. Since there are no wide ported SATA + * devices this could become an invalid port configuration. + */ +bool scic_sds_port_link_detected( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + if ((sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) && + (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && + scic_sds_port_is_wide(sci_port)) { + scic_sds_port_invalid_link_up(sci_port, sci_phy); + + return false; + } + + return true; +} + +/** + * This method is the entry point for the phy to inform the port that it is now + * in a ready state + * @sci_port: + * + * + */ +void scic_sds_port_link_up( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + sci_phy->is_in_link_training = false; + + sci_port->state_handlers->link_up_handler(sci_port, sci_phy); +} + +/** + * This method is the entry point for the phy to inform the port that it is no + * longer in a ready state + * @sci_port: + * + * + */ +void scic_sds_port_link_down( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + sci_port->state_handlers->link_down_handler(sci_port, sci_phy); +} + +/** + * This method is called to start an IO request on this port. + * @sci_port: + * @sci_dev: + * @sci_req: + * + * enum sci_status + */ +enum sci_status scic_sds_port_start_io( + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + return sci_port->state_handlers->start_io_handler( + sci_port, sci_dev, sci_req); +} + +/** + * This method is called to complete an IO request to the port. + * @sci_port: + * @sci_dev: + * @sci_req: + * + * enum sci_status + */ +enum sci_status scic_sds_port_complete_io( + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + return sci_port->state_handlers->complete_io_handler( + sci_port, sci_dev, sci_req); +} + +/** + * This method is provided to timeout requests for port operations. Mostly its + * for the port reset operation. + * + * + */ +static void scic_sds_port_timeout_handler(void *port) +{ + struct scic_sds_port *sci_port = port; + u32 current_state; + + current_state = sci_base_state_machine_get_state( + &sci_port->state_machine); + + if (current_state == SCI_BASE_PORT_STATE_RESETTING) { + /* + * if the port is still in the resetting state then the + * timeout fired before the reset completed. + */ + sci_base_state_machine_change_state( + &sci_port->state_machine, + SCI_BASE_PORT_STATE_FAILED); + } else if (current_state == SCI_BASE_PORT_STATE_STOPPED) { + /* + * if the port is stopped then the start request failed + * In this case stay in the stopped state. + */ + dev_err(sciport_to_dev(sci_port), + "%s: SCIC Port 0x%p failed to stop before tiemout.\n", + __func__, + sci_port); + } else if (current_state == SCI_BASE_PORT_STATE_STOPPING) { + /* + * if the port is still stopping then the stop has not + * completed + */ + isci_port_stop_complete( + scic_sds_port_get_controller(sci_port), + sci_port, + SCI_FAILURE_TIMEOUT); + } else { + /* + * The port is in the ready state and we have a timer + * reporting a timeout this should not happen. + */ + dev_err(sciport_to_dev(sci_port), + "%s: SCIC Port 0x%p is processing a timeout operation " + "in state %d.\n", + __func__, + sci_port, + current_state); + } +} + +/* --------------------------------------------------------------------------- */ + +/** + * This function updates the hardwares VIIT entry for this port. + * + * + */ +static void scic_sds_port_update_viit_entry(struct scic_sds_port *sci_port) +{ + struct sci_sas_address sas_address; + + scic_sds_port_get_sas_address(sci_port, &sas_address); + + writel(sas_address.high, + &sci_port->viit_registers->initiator_sas_address_hi); + writel(sas_address.low, + &sci_port->viit_registers->initiator_sas_address_lo); + + /* This value get cleared just in case its not already cleared */ + writel(0, &sci_port->viit_registers->reserved); + + /* We are required to update the status register last */ + writel(SCU_VIIT_ENTRY_ID_VIIT | + SCU_VIIT_IPPT_INITIATOR | + ((1 << sci_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | + SCU_VIIT_STATUS_ALL_VALID, + &sci_port->viit_registers->status); +} + +/** + * This method returns the maximum allowed speed for data transfers on this + * port. This maximum allowed speed evaluates to the maximum speed of the + * slowest phy in the port. + * @sci_port: This parameter specifies the port for which to retrieve the + * maximum allowed speed. + * + * This method returns the maximum negotiated speed of the slowest phy in the + * port. + */ +enum sas_linkrate scic_sds_port_get_max_allowed_speed( + struct scic_sds_port *sci_port) +{ + u16 index; + enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS; + struct scic_sds_phy *phy = NULL; + + /* + * Loop through all of the phys in this port and find the phy with the + * lowest maximum link rate. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy = sci_port->phy_table[index]; + if ( + (phy != NULL) + && (scic_sds_port_active_phy(sci_port, phy) == true) + && (phy->max_negotiated_speed < max_allowed_speed) + ) + max_allowed_speed = phy->max_negotiated_speed; + } + + return max_allowed_speed; +} + +static void scic_port_enable_broadcast_change_notification(struct scic_sds_port *port) +{ + struct scic_sds_phy *phy; + u32 register_value; + u8 index; + + /* Loop through all of the phys to enable BCN. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy = port->phy_table[index]; + if (phy != NULL) { + register_value = + readl(&phy->link_layer_registers->link_layer_control); + + /* clear the bit by writing 1. */ + writel(register_value, + &phy->link_layer_registers->link_layer_control); + } + } +} + +/* + * **************************************************************************** + * * READY SUBSTATE HANDLERS + * **************************************************************************** */ + +/* + * This method is the general ready state stop handler for the struct scic_sds_port + * object. This function will transition the ready substate machine to its + * final state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_ready_substate_stop_handler( + struct scic_sds_port *port) +{ + sci_base_state_machine_change_state( + &port->state_machine, + SCI_BASE_PORT_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/* + * This method is the general ready substate complete io handler for the + * struct scic_sds_port object. This function decrments the outstanding request count + * for this port object. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_ready_substate_complete_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + scic_sds_port_decrement_request_count(port); + + return SCI_SUCCESS; +} + +static enum sci_status scic_sds_port_ready_substate_add_phy_handler( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + enum sci_status status; + + status = scic_sds_port_set_phy(port, phy); + + if (status == SCI_SUCCESS) { + scic_sds_port_general_link_up_handler(port, phy, true); + + port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + + sci_base_state_machine_change_state( + &port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + } + + return status; +} + + +static enum sci_status scic_sds_port_ready_substate_remove_phy_handler( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + enum sci_status status; + + status = scic_sds_port_clear_phy(port, phy); + + if (status == SCI_SUCCESS) { + scic_sds_port_deactivate_phy(port, phy, true); + + port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + + sci_base_state_machine_change_state( + &port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + } + + return status; +} + +/* + * **************************************************************************** + * * READY SUBSTATE WAITING HANDLERS + * **************************************************************************** */ + +/** + * + * @sci_port: This is the struct scic_sds_port object that which has a phy that has + * gone link up. + * @sci_phy: This is the struct scic_sds_phy object that has gone link up. + * + * This method is the ready waiting substate link up handler for the + * struct scic_sds_port object. This methos will report the link up condition for + * this port and will transition to the ready operational substate. none + */ +static void scic_sds_port_ready_waiting_substate_link_up_handler( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + /* + * Since this is the first phy going link up for the port we can just enable + * it and continue. */ + scic_sds_port_activate_phy(sci_port, sci_phy, true); + + sci_base_state_machine_change_state( + &sci_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL + ); +} + +/* + * This method is the ready waiting substate start io handler for the + * struct scic_sds_port object. The port object can not accept new requests so the + * request is failed. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + return SCI_FAILURE_INVALID_STATE; +} + +/* + * **************************************************************************** + * * READY SUBSTATE OPERATIONAL HANDLERS + * **************************************************************************** */ + +/* + * This method will casue the port to reset. enum sci_status SCI_SUCCESS + */ +static enum +sci_status scic_sds_port_ready_operational_substate_reset_handler( + struct scic_sds_port *port, + u32 timeout) +{ + enum sci_status status = SCI_FAILURE_INVALID_PHY; + u32 phy_index; + struct scic_sds_phy *selected_phy = NULL; + + + /* Select a phy on which we can send the hard reset request. */ + for (phy_index = 0; + (phy_index < SCI_MAX_PHYS) && (selected_phy == NULL); + phy_index++) { + selected_phy = port->phy_table[phy_index]; + + if ((selected_phy != NULL) && + !scic_sds_port_active_phy(port, selected_phy)) { + /* + * We found a phy but it is not ready select + * different phy + */ + selected_phy = NULL; + } + } + + /* If we have a phy then go ahead and start the reset procedure */ + if (selected_phy != NULL) { + status = scic_sds_phy_reset(selected_phy); + + if (status == SCI_SUCCESS) { + isci_timer_start(port->timer_handle, timeout); + port->not_ready_reason = + SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; + + sci_base_state_machine_change_state( + &port->state_machine, + SCI_BASE_PORT_STATE_RESETTING); + } + } + + return status; +} + +/** + * scic_sds_port_ready_operational_substate_link_up_handler() - + * @sci_port: This is the struct scic_sds_port object that which has a phy that has + * gone link up. + * @sci_phy: This is the struct scic_sds_phy object that has gone link up. + * + * This method is the ready operational substate link up handler for the + * struct scic_sds_port object. This function notifies the SCI User that the phy has + * gone link up. none + */ +static void scic_sds_port_ready_operational_substate_link_up_handler( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); +} + +/** + * scic_sds_port_ready_operational_substate_link_down_handler() - + * @sci_port: This is the struct scic_sds_port object that which has a phy that has + * gone link down. + * @sci_phy: This is the struct scic_sds_phy object that has gone link down. + * + * This method is the ready operational substate link down handler for the + * struct scic_sds_port object. This function notifies the SCI User that the phy has + * gone link down and if this is the last phy in the port the port will change + * state to the ready waiting substate. none + */ +static void scic_sds_port_ready_operational_substate_link_down_handler( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + scic_sds_port_deactivate_phy(sci_port, sci_phy, true); + + /* + * If there are no active phys left in the port, then transition + * the port to the WAITING state until such time as a phy goes + * link up. */ + if (sci_port->active_phy_mask == 0) + sci_base_state_machine_change_state(&sci_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); +} + +/* + * This method is the ready operational substate start io handler for the + * struct scic_sds_port object. This function incremetns the outstanding request + * count for this port object. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + port->started_request_count++; + return SCI_SUCCESS; +} + +/* + * **************************************************************************** + * * READY SUBSTATE OPERATIONAL HANDLERS + * **************************************************************************** */ + +/* + * This is the default method for a port add phy request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + enum sci_status status; + + status = scic_sds_port_set_phy(port, phy); + + if (status == SCI_SUCCESS) { + scic_sds_port_general_link_up_handler(port, phy, true); + + /* + * Re-enter the configuring state since this may be the last phy in + * the port. */ + sci_base_state_machine_change_state( + &port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + } + + return status; +} + +/* + * This is the default method for a port remove phy request. It will report a + * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handler( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + enum sci_status status; + + status = scic_sds_port_clear_phy(port, phy); + + if (status == SCI_SUCCESS) { + scic_sds_port_deactivate_phy(port, phy, true); + + /* + * Re-enter the configuring state since this may be the last phy in + * the port. */ + sci_base_state_machine_change_state( + &port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING + ); + } + + return status; +} + +/** + * scic_sds_port_ready_configuring_substate_complete_io_handler() - + * @port: This is the port that is being requested to complete the io request. + * @device: This is the device on which the io is completing. + * + * This method will decrement the outstanding request count for this port. If + * the request count goes to 0 then the port can be reprogrammed with its new + * phy data. + */ +static enum sci_status +scic_sds_port_ready_configuring_substate_complete_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + scic_sds_port_decrement_request_count(port); + + if (port->started_request_count == 0) { + sci_base_state_machine_change_state( + &port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL + ); + } + + return SCI_SUCCESS; +} + +static enum sci_status default_port_handler(struct scic_sds_port *sci_port, + const char *func) +{ + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&sci_port->state_machine)); + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status +scic_sds_port_default_start_handler(struct scic_sds_port *sci_port) +{ + return default_port_handler(sci_port, __func__); +} + +static enum sci_status +scic_sds_port_default_stop_handler(struct scic_sds_port *sci_port) +{ + return default_port_handler(sci_port, __func__); +} + +static enum sci_status +scic_sds_port_default_destruct_handler(struct scic_sds_port *sci_port) +{ + return default_port_handler(sci_port, __func__); +} + +static enum sci_status +scic_sds_port_default_reset_handler(struct scic_sds_port *sci_port, + u32 timeout) +{ + return default_port_handler(sci_port, __func__); +} + +static enum sci_status +scic_sds_port_default_add_phy_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *base_phy) +{ + return default_port_handler(sci_port, __func__); +} + +static enum sci_status +scic_sds_port_default_remove_phy_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *base_phy) +{ + return default_port_handler(sci_port, __func__); +} + +/* + * This is the default method for a port unsolicited frame request. It will + * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even + * possible to receive an unsolicited frame directed to a port object? It + * seems possible if we implementing virtual functions but until then? + */ +static enum sci_status +scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port, + u32 frame_index) +{ + struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); + + default_port_handler(sci_port, __func__); + scic_sds_controller_release_frame(scic, frame_index); + + return SCI_FAILURE_INVALID_STATE; +} + +static enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port, + u32 event_code) +{ + return default_port_handler(sci_port, __func__); +} + +static void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + default_port_handler(sci_port, __func__); +} + +static void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + default_port_handler(sci_port, __func__); +} + +static enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + return default_port_handler(sci_port, __func__); +} + +static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + return default_port_handler(sci_port, __func__); +} + + + +static struct scic_sds_port_state_handler +scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = { + { + /* SCIC_SDS_PORT_READY_SUBSTATE_WAITING */ + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_ready_substate_add_phy_handler, + scic_sds_port_default_remove_phy_handler, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_ready_waiting_substate_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_ready_waiting_substate_start_io_handler, + scic_sds_port_ready_substate_complete_io_handler, + }, + + { + /* SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL */ + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_ready_operational_substate_reset_handler, + scic_sds_port_ready_substate_add_phy_handler, + scic_sds_port_ready_substate_remove_phy_handler, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_ready_operational_substate_link_up_handler, + scic_sds_port_ready_operational_substate_link_down_handler, + scic_sds_port_ready_operational_substate_start_io_handler, + scic_sds_port_ready_substate_complete_io_handler, + }, + + { + /* SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING */ + scic_sds_port_default_start_handler, + scic_sds_port_ready_substate_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_ready_configuring_substate_add_phy_handler, + scic_sds_port_ready_configuring_substate_remove_phy_handler, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_ready_configuring_substate_complete_io_handler + } +}; + +/** + * scic_sds_port_set_ready_state_handlers() - + * + * This macro sets the port ready substate handlers. + */ +#define scic_sds_port_set_ready_state_handlers(port, state_id) \ + scic_sds_port_set_state_handlers(\ + port, &scic_sds_port_ready_substate_handler_table[(state_id)] \ + ) + +/* + * ****************************************************************************** + * * PORT STATE PRIVATE METHODS + * ****************************************************************************** */ + +/** + * + * @sci_port: This is the struct scic_sds_port object to suspend. + * + * This method will susped the port task scheduler for this port object. none + */ +static void +scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port) +{ + u32 pts_control_value; + + pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &port->port_task_scheduler_registers->control); +} + +/** + * scic_sds_port_post_dummy_request() - post dummy/workaround request + * @sci_port: port to post task + * + * Prevent the hardware scheduler from posting new requests to the front + * of the scheduler queue causing a starvation problem for currently + * ongoing requests. + * + */ +static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) +{ + u32 command; + struct scu_task_context *task_context; + struct scic_sds_controller *scic = sci_port->owning_controller; + u16 tci = sci_port->reserved_tci; + + task_context = scic_sds_controller_get_task_context_buffer(scic, tci); + + task_context->abort = 0; + + command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + tci; + + scic_sds_controller_post_request(scic, command); +} + +/** + * This routine will abort the dummy request. This will alow the hardware to + * power down parts of the silicon to save power. + * + * @sci_port: The port on which the task must be aborted. + * + */ +static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + u16 tci = sci_port->reserved_tci; + struct scu_task_context *tc; + u32 command; + + tc = scic_sds_controller_get_task_context_buffer(scic, tci); + + tc->abort = 1; + + command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT | + sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + tci; + + scic_sds_controller_post_request(scic, command); +} + +/** + * + * @sci_port: This is the struct scic_sds_port object to resume. + * + * This method will resume the port task scheduler for this port object. none + */ +static void +scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) +{ + u32 pts_control_value; + + pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &port->port_task_scheduler_registers->control); +} + +/* + * ****************************************************************************** + * * PORT READY SUBSTATE METHODS + * ****************************************************************************** */ + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCIC_SDS_PORT_READY_SUBSTATE_WAITING. This function checks the + * port for any ready phys. If there is at least one phy in a ready state then + * the port transitions to the ready operational substate. none + */ +static void scic_sds_port_ready_substate_waiting_enter(void *object) +{ + struct scic_sds_port *sci_port = object; + + scic_sds_port_set_ready_state_handlers( + sci_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING + ); + + scic_sds_port_suspend_port_task_scheduler(sci_port); + + sci_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; + + if (sci_port->active_phy_mask != 0) { + /* At least one of the phys on the port is ready */ + sci_base_state_machine_change_state( + &sci_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL + ); + } +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This function will perform the actions required by the struct scic_sds_port + * on entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets + * the state handlers for the port object, notifies the SCI User that the port + * is ready, and resumes port operations. none + */ +static void scic_sds_port_ready_substate_operational_enter(void *object) +{ + u32 index; + struct scic_sds_port *sci_port = object; + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + struct isci_port *iport = sci_port_to_iport(sci_port); + + scic_sds_port_set_ready_state_handlers( + sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); + + isci_port_ready(ihost, iport); + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (sci_port->phy_table[index]) { + writel(sci_port->physical_port_index, + &sci_port->port_pe_configuration_register[ + sci_port->phy_table[index]->phy_index]); + } + } + + scic_sds_port_update_viit_entry(sci_port); + + scic_sds_port_resume_port_task_scheduler(sci_port); + + /* + * Post the dummy task for the port so the hardware can schedule + * io correctly + */ + scic_sds_port_post_dummy_request(sci_port); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports + * the port not ready and suspends the port task scheduler. none + */ +static void scic_sds_port_ready_substate_operational_exit(void *object) +{ + struct scic_sds_port *sci_port = object; + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + struct isci_port *iport = sci_port_to_iport(sci_port); + + /* + * Kill the dummy task for this port if it has not yet posted + * the hardware will treat this as a NOP and just return abort + * complete. + */ + scic_sds_port_abort_dummy_request(sci_port); + + isci_port_not_ready(ihost, iport); +} + +/* + * ****************************************************************************** + * * PORT READY CONFIGURING METHODS + * ****************************************************************************** */ + +/** + * scic_sds_port_ready_substate_configuring_enter() - + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports + * the port not ready and suspends the port task scheduler. none + */ +static void scic_sds_port_ready_substate_configuring_enter(void *object) +{ + struct scic_sds_port *sci_port = object; + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + struct isci_port *iport = sci_port_to_iport(sci_port); + + scic_sds_port_set_ready_state_handlers( + sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + + if (sci_port->active_phy_mask == 0) { + isci_port_not_ready(ihost, iport); + + sci_base_state_machine_change_state( + &sci_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + } else if (sci_port->started_request_count == 0) + sci_base_state_machine_change_state( + &sci_port->ready_substate_machine, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); +} + +static void scic_sds_port_ready_substate_configuring_exit(void *object) +{ + struct scic_sds_port *sci_port = object; + + scic_sds_port_suspend_port_task_scheduler(sci_port); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_port_ready_substate_table[] = { + [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { + .enter_state = scic_sds_port_ready_substate_waiting_enter, + }, + [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { + .enter_state = scic_sds_port_ready_substate_operational_enter, + .exit_state = scic_sds_port_ready_substate_operational_exit + }, + [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { + .enter_state = scic_sds_port_ready_substate_configuring_enter, + .exit_state = scic_sds_port_ready_substate_configuring_exit + }, +}; + +/** + * + * @port: This is the struct scic_sds_port object on which the io request count will + * be decremented. + * @device: This is the struct scic_sds_remote_device object to which the io request + * is being directed. This parameter is not required to complete this + * operation. + * @io_request: This is the request that is being completed on this port + * object. This parameter is not required to complete this operation. + * + * This is a general complete io request handler for the struct scic_sds_port object. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_general_complete_io_handler( + struct scic_sds_port *port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + scic_sds_port_decrement_request_count(port); + + return SCI_SUCCESS; +} + +/** + * scic_sds_port_stopped_state_start_handler() - stop a port from "started" + * + * @port: This is the struct scic_sds_port object which is cast into a + * struct scic_sds_port object. + * + * This function takes the struct scic_sds_port from a stopped state and + * attempts to start it. To start a port it must have no assiged devices and + * it must have at least one phy assigned to it. If those conditions are + * met then the port can transition to the ready state. + * enum sci_status + * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION + * This struct scic_sds_port object could not be started because the port + * configuration is not valid. + * SCI_SUCCESS + * the start request is successful and the struct scic_sds_port object + * has transitioned to the SCI_BASE_PORT_STATE_READY. + */ +static enum sci_status +scic_sds_port_stopped_state_start_handler(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + enum sci_status status = SCI_SUCCESS; + u32 phy_mask; + + if (sci_port->assigned_device_count > 0) { + /* + * @todo This is a start failure operation because + * there are still devices assigned to this port. + * There must be no devices assigned to a port on a + * start operation. + */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + sci_port->timer_handle = + isci_timer_create(ihost, + sci_port, + scic_sds_port_timeout_handler); + + if (!sci_port->timer_handle) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + + if (sci_port->reserved_rni == SCU_DUMMY_INDEX) { + u16 rni = scic_sds_remote_node_table_allocate_remote_node( + &scic->available_remote_nodes, 1); + + if (rni != SCU_DUMMY_INDEX) + scic_sds_port_construct_dummy_rnc(sci_port, rni); + else + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + sci_port->reserved_rni = rni; + } + + if (sci_port->reserved_tci == SCU_DUMMY_INDEX) { + /* Allocate a TCI and remove the sequence nibble */ + u16 tci = scic_controller_allocate_io_tag(scic); + + if (tci != SCU_DUMMY_INDEX) + scic_sds_port_construct_dummy_task(sci_port, tci); + else + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + sci_port->reserved_tci = tci; + } + + if (status == SCI_SUCCESS) { + phy_mask = scic_sds_port_get_phys(sci_port); + + /* + * There are one or more phys assigned to this port. Make sure + * the port's phy mask is in fact legal and supported by the + * silicon. + */ + if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { + sci_base_state_machine_change_state( + &sci_port->state_machine, + SCI_BASE_PORT_STATE_READY); + + return SCI_SUCCESS; + } else + status = SCI_FAILURE; + } + + if (status != SCI_SUCCESS) + scic_sds_port_destroy_dummy_resources(sci_port); + + return status; +} + +/* + * This method takes the struct scic_sds_port that is in a stopped state and handles a + * stop request. This function takes no action. enum sci_status SCI_SUCCESS the + * stop request is successful as the struct scic_sds_port object is already stopped. + */ +static enum sci_status scic_sds_port_stopped_state_stop_handler( + struct scic_sds_port *port) +{ + /* We are already stopped so there is nothing to do here */ + return SCI_SUCCESS; +} + +/* + * This method takes the struct scic_sds_port that is in a stopped state and handles + * the destruct request. The stopped state is the only state in which the + * struct scic_sds_port can be destroyed. This function causes the port object to + * transition to the SCI_BASE_PORT_STATE_FINAL. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_stopped_state_destruct_handler( + struct scic_sds_port *port) +{ + sci_base_state_machine_stop(&port->state_machine); + + return SCI_SUCCESS; +} + +/* + * This method takes the struct scic_sds_port that is in a stopped state and handles + * the add phy request. In MPC mode the only time a phy can be added to a port + * is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status + * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not + * be added to the port. SCI_SUCCESS if the phy is added to the port. + */ +static enum sci_status scic_sds_port_stopped_state_add_phy_handler( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + struct sci_sas_address port_sas_address; + + /* Read the port assigned SAS Address if there is one */ + scic_sds_port_get_sas_address(port, &port_sas_address); + + if (port_sas_address.high != 0 && port_sas_address.low != 0) { + struct sci_sas_address phy_sas_address; + + /* + * Make sure that the PHY SAS Address matches the SAS Address + * for this port. */ + scic_sds_phy_get_sas_address(phy, &phy_sas_address); + + if ( + (port_sas_address.high != phy_sas_address.high) + || (port_sas_address.low != phy_sas_address.low) + ) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + return scic_sds_port_set_phy(port, phy); +} + +/* + * This method takes the struct scic_sds_port that is in a stopped state and handles + * the remove phy request. In MPC mode the only time a phy can be removed from + * a port is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status + * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not + * be added to the port. SCI_SUCCESS if the phy is added to the port. + */ +static enum sci_status scic_sds_port_stopped_state_remove_phy_handler( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + return scic_sds_port_clear_phy(port, phy); +} + +/* + * **************************************************************************** + * * READY STATE HANDLERS + * **************************************************************************** */ + +/* + * **************************************************************************** + * * RESETTING STATE HANDLERS + * **************************************************************************** */ + +/* + * **************************************************************************** + * * STOPPING STATE HANDLERS + * **************************************************************************** */ + +/* + * This method takes the struct scic_sds_port that is in a stopping state and handles + * the complete io request. Should the request count reach 0 then the port + * object will transition to the stopped state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_stopping_state_complete_io_handler( + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *device, + struct scic_sds_request *io_request) +{ + scic_sds_port_decrement_request_count(sci_port); + + if (sci_port->started_request_count == 0) { + sci_base_state_machine_change_state(&sci_port->state_machine, + SCI_BASE_PORT_STATE_STOPPED); + } + + return SCI_SUCCESS; +} + +/* + * **************************************************************************** + * * RESETTING STATE HANDLERS + * **************************************************************************** */ + +/** + * + * @port: This is the port object which is being requested to stop. + * + * This method will stop a failed port. This causes a transition to the + * stopping state. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_port_reset_state_stop_handler( + struct scic_sds_port *port) +{ + sci_base_state_machine_change_state( + &port->state_machine, + SCI_BASE_PORT_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/* + * This method will transition a failed port to its ready state. The port + * failed because a hard reset request timed out but at some time later one or + * more phys in the port became ready. enum sci_status SCI_SUCCESS + */ +static void scic_sds_port_reset_state_link_up_handler( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + /* + * / @todo We should make sure that the phy that has gone link up is the same + * / one on which we sent the reset. It is possible that the phy on + * / which we sent the reset is not the one that has gone link up and we + * / want to make sure that phy being reset comes back. Consider the + * / case where a reset is sent but before the hardware processes the + * / reset it get a link up on the port because of a hot plug event. + * / because of the reset request this phy will go link down almost + * / immediately. */ + + /* + * In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + scic_sds_port_general_link_up_handler(port, phy, false); +} + +/* + * This method process link down notifications that occur during a port reset + * operation. Link downs can occur during the reset operation. enum sci_status + * SCI_SUCCESS + */ +static void scic_sds_port_reset_state_link_down_handler( + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + /* + * In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + scic_sds_port_deactivate_phy(port, phy, false); +} + +static struct scic_sds_port_state_handler +scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = +{ + /* SCI_BASE_PORT_STATE_STOPPED */ + { + scic_sds_port_stopped_state_start_handler, + scic_sds_port_stopped_state_stop_handler, + scic_sds_port_stopped_state_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_stopped_state_add_phy_handler, + scic_sds_port_stopped_state_remove_phy_handler, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_default_complete_io_handler + }, + /* SCI_BASE_PORT_STATE_STOPPING */ + { + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_stopping_state_complete_io_handler + }, + /* SCI_BASE_PORT_STATE_READY */ + { + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_general_complete_io_handler + }, + /* SCI_BASE_PORT_STATE_RESETTING */ + { + scic_sds_port_default_start_handler, + scic_sds_port_reset_state_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_reset_state_link_up_handler, + scic_sds_port_reset_state_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_general_complete_io_handler + }, + /* SCI_BASE_PORT_STATE_FAILED */ + { + scic_sds_port_default_start_handler, + scic_sds_port_default_stop_handler, + scic_sds_port_default_destruct_handler, + scic_sds_port_default_reset_handler, + scic_sds_port_default_add_phy_handler, + scic_sds_port_default_remove_phy_handler, + scic_sds_port_default_frame_handler, + scic_sds_port_default_event_handler, + scic_sds_port_default_link_up_handler, + scic_sds_port_default_link_down_handler, + scic_sds_port_default_start_io_handler, + scic_sds_port_general_complete_io_handler + } +}; + +/* + * ****************************************************************************** + * * PORT STATE PRIVATE METHODS + * ****************************************************************************** */ + +/** + * + * @sci_port: This is the port object which to suspend. + * + * This method will enable the SCU Port Task Scheduler for this port object but + * will leave the port task scheduler in a suspended state. none + */ +static void +scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port) +{ + u32 pts_control_value; + + pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &port->port_task_scheduler_registers->control); +} + +/** + * + * @sci_port: This is the port object which to resume. + * + * This method will disable the SCU port task scheduler for this port object. + * none + */ +static void +scic_sds_port_disable_port_task_scheduler(struct scic_sds_port *port) +{ + u32 pts_control_value; + + pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value &= + ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND)); + writel(pts_control_value, &port->port_task_scheduler_registers->control); +} + +static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + u8 phys_index = sci_port->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = sci_port->reserved_rni; + u32 command; + + rnc = &scic->remote_node_context_table[rni]; + rnc->ssp.is_valid = true; + + command = SCU_CONTEXT_COMMAND_POST_RNC_32 | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + scic_sds_controller_post_request(scic, command); + + /* ensure hardware has seen the post rnc command and give it + * ample time to act before sending the suspend + */ + readl(&scic->smu_registers->interrupt_status); /* flush */ + udelay(10); + + command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + scic_sds_controller_post_request(scic, command); +} + +static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + u8 phys_index = sci_port->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = sci_port->reserved_rni; + u32 command; + + rnc = &scic->remote_node_context_table[rni]; + + rnc->ssp.is_valid = false; + + /* ensure the preceding tc abort request has reached the + * controller and give it ample time to act before posting the rnc + * invalidate + */ + readl(&scic->smu_registers->interrupt_status); /* flush */ + udelay(10); + + command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + scic_sds_controller_post_request(scic, command); +} + +/* + * ****************************************************************************** + * * PORT STATE METHODS + * ****************************************************************************** */ + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_STOPPED. This function sets the stopped + * state handlers for the struct scic_sds_port object and disables the port task + * scheduler in the hardware. none + */ +static void scic_sds_port_stopped_state_enter(void *object) +{ + struct scic_sds_port *sci_port = object; + + scic_sds_port_set_base_state_handlers( + sci_port, SCI_BASE_PORT_STATE_STOPPED + ); + + if ( + SCI_BASE_PORT_STATE_STOPPING + == sci_port->state_machine.previous_state_id + ) { + /* + * If we enter this state becasuse of a request to stop + * the port then we want to disable the hardwares port + * task scheduler. */ + scic_sds_port_disable_port_task_scheduler(sci_port); + } +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * exiting the SCI_BASE_STATE_STOPPED. This function enables the SCU hardware + * port task scheduler. none + */ +static void scic_sds_port_stopped_state_exit(void *object) +{ + struct scic_sds_port *sci_port = object; + + /* Enable and suspend the port task scheduler */ + scic_sds_port_enable_port_task_scheduler(sci_port); +} + +/** + * scic_sds_port_ready_state_enter - + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state + * handlers for the struct scic_sds_port object, reports the port object as + * not ready and starts the ready substate machine. none + */ +static void scic_sds_port_ready_state_enter(void *object) +{ + struct scic_sds_port *sci_port = object; + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + struct isci_port *iport = sci_port_to_iport(sci_port); + u32 prev_state; + + /* Put the ready state handlers in place though they will not be there long */ + scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY); + + prev_state = sci_port->state_machine.previous_state_id; + if (prev_state == SCI_BASE_PORT_STATE_RESETTING) + isci_port_hard_reset_complete(iport, SCI_SUCCESS); + else + isci_port_not_ready(ihost, iport); + + /* Post and suspend the dummy remote node context for this port. */ + scic_sds_port_post_dummy_remote_node(sci_port); + + /* Start the ready substate machine */ + sci_base_state_machine_start(&sci_port->ready_substate_machine); +} + +static void scic_sds_port_ready_state_exit(void *object) +{ + struct scic_sds_port *sci_port = object; + + sci_base_state_machine_stop(&sci_port->ready_substate_machine); + scic_sds_port_invalidate_dummy_remote_node(sci_port); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_RESETTING. This function sets the resetting + * state handlers for the struct scic_sds_port object. none + */ +static void scic_sds_port_resetting_state_enter(void *object) +{ + struct scic_sds_port *sci_port = object; + + scic_sds_port_set_base_state_handlers( + sci_port, SCI_BASE_PORT_STATE_RESETTING + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This function will perform the actions required by the + * struct scic_sds_port on + * exiting the SCI_BASE_STATE_RESETTING. This function does nothing. none + */ +static inline void scic_sds_port_resetting_state_exit(void *object) +{ + struct scic_sds_port *sci_port = object; + + isci_timer_stop(sci_port->timer_handle); +} + +/** + * + * @object: This is the void object which is cast to a + * struct scic_sds_port object. + * + * This method will perform the actions required by the struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping + * state handlers for the struct scic_sds_port object. none + */ +static void scic_sds_port_stopping_state_enter(void *object) +{ + struct scic_sds_port *sci_port = object; + + scic_sds_port_set_base_state_handlers( + sci_port, SCI_BASE_PORT_STATE_STOPPING + ); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This function will perform the actions required by the + * struct scic_sds_port on + * exiting the SCI_BASE_STATE_STOPPING. This function does nothing. none + */ +static inline void +scic_sds_port_stopping_state_exit(void *object) +{ + struct scic_sds_port *sci_port = object; + + isci_timer_stop(sci_port->timer_handle); + + scic_sds_port_destroy_dummy_resources(sci_port); +} + +/** + * + * @object: This is the object which is cast to a struct scic_sds_port object. + * + * This function will perform the actions required by the + * struct scic_sds_port on + * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping + * state handlers for the struct scic_sds_port object. none + */ +static void scic_sds_port_failed_state_enter(void *object) +{ + struct scic_sds_port *sci_port = object; + struct isci_port *iport = sci_port_to_iport(sci_port); + + scic_sds_port_set_base_state_handlers(sci_port, + SCI_BASE_PORT_STATE_FAILED); + + isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state scic_sds_port_state_table[] = { + [SCI_BASE_PORT_STATE_STOPPED] = { + .enter_state = scic_sds_port_stopped_state_enter, + .exit_state = scic_sds_port_stopped_state_exit + }, + [SCI_BASE_PORT_STATE_STOPPING] = { + .enter_state = scic_sds_port_stopping_state_enter, + .exit_state = scic_sds_port_stopping_state_exit + }, + [SCI_BASE_PORT_STATE_READY] = { + .enter_state = scic_sds_port_ready_state_enter, + .exit_state = scic_sds_port_ready_state_exit + }, + [SCI_BASE_PORT_STATE_RESETTING] = { + .enter_state = scic_sds_port_resetting_state_enter, + .exit_state = scic_sds_port_resetting_state_exit + }, + [SCI_BASE_PORT_STATE_FAILED] = { + .enter_state = scic_sds_port_failed_state_enter, + } +}; + +void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, + struct scic_sds_controller *scic) +{ + sci_base_state_machine_construct(&sci_port->state_machine, + sci_port, + scic_sds_port_state_table, + SCI_BASE_PORT_STATE_STOPPED); + + sci_base_state_machine_start(&sci_port->state_machine); + + sci_base_state_machine_construct(&sci_port->ready_substate_machine, + sci_port, + scic_sds_port_ready_substate_table, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + + sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; + sci_port->physical_port_index = index; + sci_port->active_phy_mask = 0; + + sci_port->owning_controller = scic; + + sci_port->started_request_count = 0; + sci_port->assigned_device_count = 0; + + sci_port->reserved_rni = SCU_DUMMY_INDEX; + sci_port->reserved_tci = SCU_DUMMY_INDEX; + + sci_port->timer_handle = NULL; + sci_port->port_task_scheduler_registers = NULL; + + for (index = 0; index < SCI_MAX_PHYS; index++) + sci_port->phy_table[index] = NULL; +} + +void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) +{ + INIT_LIST_HEAD(&iport->remote_dev_list); + INIT_LIST_HEAD(&iport->domain_dev_list); + spin_lock_init(&iport->state_lock); + init_completion(&iport->start_complete); + iport->isci_host = ihost; + isci_port_change_state(iport, isci_freed); +} + +/** + * isci_port_get_state() - This function gets the status of the port object. + * @isci_port: This parameter points to the isci_port object + * + * status of the object as a isci_status enum. + */ +enum isci_status isci_port_get_state( + struct isci_port *isci_port) +{ + return isci_port->status; +} + +static void isci_port_bc_change_received(struct isci_host *ihost, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + dev_dbg(&ihost->pdev->dev, "%s: iphy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); + + ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD); + scic_port_enable_broadcast_change_notification(sci_port); +} + +void scic_sds_port_broadcast_change_received( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + + /* notify the user. */ + isci_port_bc_change_received(ihost, sci_port, sci_phy); +} + +int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) +{ + unsigned long flags; + enum sci_status status; + int ret = TMF_RESP_FUNC_COMPLETE; + + dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n", + __func__, iport); + + init_completion(&iport->hard_reset_complete); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT + status = scic_port_hard_reset(&iport->sci, ISCI_PORT_RESET_TIMEOUT); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (status == SCI_SUCCESS) { + wait_for_completion(&iport->hard_reset_complete); + + dev_dbg(&ihost->pdev->dev, + "%s: iport = %p; hard reset completion\n", + __func__, iport); + + if (iport->hard_reset_status != SCI_SUCCESS) + ret = TMF_RESP_FUNC_FAILED; + } else { + ret = TMF_RESP_FUNC_FAILED; + + dev_err(&ihost->pdev->dev, + "%s: iport = %p; scic_port_hard_reset call" + " failed 0x%x\n", + __func__, iport, status); + + } + + /* If the hard reset for the port has failed, consider this + * the same as link failures on all phys in the port. + */ + if (ret != TMF_RESP_FUNC_COMPLETE) { + dev_err(&ihost->pdev->dev, + "%s: iport = %p; hard reset failed " + "(0x%x) - sending link down to libsas for phy %p\n", + __func__, iport, iport->hard_reset_status, iphy); + + isci_port_link_down(ihost, iphy, iport); + } + + return ret; +} + +/** + * isci_port_deformed() - This function is called by libsas when a port becomes + * inactive. + * @phy: This parameter specifies the libsas phy with the inactive port. + * + */ +void isci_port_deformed(struct asd_sas_phy *phy) +{ + pr_debug("%s: sas_phy = %p\n", __func__, phy); +} + +/** + * isci_port_formed() - This function is called by libsas when a port becomes + * active. + * @phy: This parameter specifies the libsas phy with the active port. + * + */ +void isci_port_formed(struct asd_sas_phy *phy) +{ + pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port); } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 59505cb..ea41dce 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -58,7 +58,10 @@ #include #include "isci.h" -#include "scic_sds_port.h" +#include "sas.h" +#include "phy.h" + +#define SCIC_SDS_DUMMY_PORT 0xFF struct isci_phy; struct isci_host; @@ -73,6 +76,111 @@ enum isci_status { }; /** + * struct scic_sds_port + * + * The core port object provides the the abstraction for an SCU port. + */ +struct scic_sds_port { + + /** + * This field contains the information for the base port state machine. + */ + struct sci_base_state_machine state_machine; + + /** + * This field is the port index that is reported to the SCI USER. + * This allows the actual hardware physical port to change without + * the SCI USER getting a different answer for the get port index. + */ + u8 logical_port_index; + + /** + * This field is the port index used to program the SCU hardware. + */ + u8 physical_port_index; + + /** + * This field contains the active phy mask for the port. + * This mask is used in conjunction with the phy state to determine + * which phy to select for some port operations. + */ + u8 active_phy_mask; + + u16 reserved_rni; + u16 reserved_tci; + + /** + * This field contains the count of the io requests started on this port + * object. It is used to control controller shutdown. + */ + u32 started_request_count; + + /** + * This field contains the number of devices assigned to this port. + * It is used to control port start requests. + */ + u32 assigned_device_count; + + /** + * This field contains the reason for the port not going ready. It is + * assigned in the state handlers and used in the state transition. + */ + u32 not_ready_reason; + + /** + * This field is the table of phys assigned to the port. + */ + struct scic_sds_phy *phy_table[SCI_MAX_PHYS]; + + /** + * This field is a pointer back to the controller that owns this + * port object. + */ + struct scic_sds_controller *owning_controller; + + /** + * This field contains the port start/stop timer handle. + */ + void *timer_handle; + + /** + * This field points to the current set of state handlers for this port + * object. These state handlers are assigned at each enter state of + * the state machine. + */ + struct scic_sds_port_state_handler *state_handlers; + + /** + * This field is the ready substate machine for the port. + */ + struct sci_base_state_machine ready_substate_machine; + + /* / Memory mapped hardware register space */ + + /** + * This field is the pointer to the port task scheduler registers + * for the SCU hardware. + */ + struct scu_port_task_scheduler_registers __iomem + *port_task_scheduler_registers; + + /** + * This field is identical for all port objects and points to the port + * task scheduler group PE configuration registers. + * It is used to assign PEs to a port. + */ + u32 __iomem *port_pe_configuration_register; + + /** + * This field is the VIIT register space for ths port object. + */ + struct scu_viit_entry __iomem *viit_registers; + +}; + + + +/** * struct isci_port - This class represents the port object used to internally * represent libsas port objects. It also keeps a list of remote device * objects. @@ -99,54 +207,301 @@ static inline struct isci_port *sci_port_to_iport(struct scic_sds_port *sci_port return iport; } -enum isci_status isci_port_get_state( - struct isci_port *isci_port); +enum scic_port_not_ready_reason_code { + SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, + SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, + SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, + SCIC_PORT_NOT_READY_RECONFIGURING, + + SCIC_PORT_NOT_READY_REASON_CODE_MAX +}; + +struct scic_port_end_point_properties { + struct sci_sas_address sas_address; + struct scic_phy_proto protocols; +}; + +struct scic_port_properties { + u32 index; + struct scic_port_end_point_properties local; + struct scic_port_end_point_properties remote; + u32 phy_mask; +}; + +/** + * enum SCIC_SDS_PORT_READY_SUBSTATES - + * + * This enumeration depicts all of the states for the core port ready substate + * machine. + */ +enum scic_sds_port_ready_substates { + /** + * The substate where the port is started and ready but has no + * active phys. + */ + SCIC_SDS_PORT_READY_SUBSTATE_WAITING, + + /** + * The substate where the port is started and ready and there is + * at least one phy operational. + */ + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL, + + /** + * The substate where the port is started and there was an + * add/remove phy event. This state is only used in Automatic + * Port Configuration Mode (APC) + */ + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING, + + SCIC_SDS_PORT_READY_MAX_SUBSTATES +}; + +/** + * enum scic_sds_port_states - This enumeration depicts all the states for the + * common port state machine. + * + * + */ +enum scic_sds_port_states { + /** + * This state indicates that the port has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_BASE_PORT_STATE_STOPPED, + + /** + * This state indicates that the port is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_BASE_PORT_STATE_STOPPING, + + /** + * This state indicates the port is now ready. Thus, the user is + * able to perform IO operations on this port. + * This state is entered from the STARTING state. + */ + SCI_BASE_PORT_STATE_READY, + + /** + * This state indicates the port is in the process of performing a hard + * reset. Thus, the user is unable to perform IO operations on this + * port. + * This state is entered from the READY state. + */ + SCI_BASE_PORT_STATE_RESETTING, + + /** + * This state indicates the port has failed a reset request. This state + * is entered when a port reset request times out. + * This state is entered from the RESETTING state. + */ + SCI_BASE_PORT_STATE_FAILED, + + SCI_BASE_PORT_MAX_STATES + +}; + +struct scic_sds_remote_device; +struct scic_sds_request; + +typedef enum sci_status (*scic_sds_port_handler_t)(struct scic_sds_port *); -void isci_port_formed( - struct asd_sas_phy *); +typedef enum sci_status (*scic_sds_port_phy_handler_t)(struct scic_sds_port *, + struct scic_sds_phy *); -void isci_port_deformed( - struct asd_sas_phy *); +typedef enum sci_status (*scic_sds_port_reset_handler_t)(struct scic_sds_port *, + u32 timeout); -void isci_port_bc_change_received( - struct isci_host *isci_host, - struct scic_sds_port *port, - struct scic_sds_phy *phy); +typedef enum sci_status (*scic_sds_port_event_handler_t)(struct scic_sds_port *, u32); -void isci_port_link_up( - struct isci_host *isci_host, - struct scic_sds_port *port, - struct scic_sds_phy *phy); +typedef enum sci_status (*scic_sds_port_frame_handler_t)(struct scic_sds_port *, u32); -void isci_port_link_down( - struct isci_host *isci_host, - struct isci_phy *isci_phy, - struct isci_port *port); +typedef void (*scic_sds_port_link_handler_t)(struct scic_sds_port *, struct scic_sds_phy *); -void isci_port_ready( - struct isci_host *isci_host, +typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_port *, + struct scic_sds_remote_device *, + struct scic_sds_request *); + +struct scic_sds_port_state_handler { + /** + * The start_handler specifies the method invoked when a user + * attempts to start a port. + */ + scic_sds_port_handler_t start_handler; + + /** + * The stop_handler specifies the method invoked when a user + * attempts to stop a port. + */ + scic_sds_port_handler_t stop_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a port. + */ + scic_sds_port_handler_t destruct_handler; + + /** + * The reset_handler specifies the method invoked when a user + * attempts to hard reset a port. + */ + scic_sds_port_reset_handler_t reset_handler; + + /** + * The add_phy_handler specifies the method invoked when a user + * attempts to add another phy into the port. + */ + scic_sds_port_phy_handler_t add_phy_handler; + + /** + * The remove_phy_handler specifies the method invoked when a user + * attempts to remove a phy from the port. + */ + scic_sds_port_phy_handler_t remove_phy_handler; + + scic_sds_port_frame_handler_t frame_handler; + scic_sds_port_event_handler_t event_handler; + + scic_sds_port_link_handler_t link_up_handler; + scic_sds_port_link_handler_t link_down_handler; + + scic_sds_port_io_request_handler_t start_io_handler; + scic_sds_port_io_request_handler_t complete_io_handler; + +}; + +/** + * scic_sds_port_get_controller() - + * + * Helper macro to get the owning controller of this port + */ +#define scic_sds_port_get_controller(this_port) \ + ((this_port)->owning_controller) + +/** + * scic_sds_port_set_base_state_handlers() - + * + * This macro will change the state handlers to those of the specified state id + */ +#define scic_sds_port_set_base_state_handlers(this_port, state_id) \ + scic_sds_port_set_state_handlers(\ + (this_port), &scic_sds_port_state_handler_table[(state_id)]) + +/** + * scic_sds_port_set_state_handlers() - + * + * Helper macro to set the port object state handlers + */ +#define scic_sds_port_set_state_handlers(this_port, handlers) \ + ((this_port)->state_handlers = (handlers)) + +/** + * scic_sds_port_get_index() - + * + * This macro returns the physical port index for this port object + */ +#define scic_sds_port_get_index(this_port) \ + ((this_port)->physical_port_index) + + +static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port) +{ + if (WARN_ONCE(sci_port->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + sci_port->started_request_count--; +} + +#define scic_sds_port_active_phy(port, phy) \ + (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) + +void scic_sds_port_construct( + struct scic_sds_port *sci_port, + u8 port_index, + struct scic_sds_controller *scic); + +enum sci_status scic_sds_port_initialize( + struct scic_sds_port *sci_port, + void __iomem *port_task_scheduler_registers, + void __iomem *port_configuration_regsiter, + void __iomem *viit_registers); + +enum sci_status scic_sds_port_add_phy( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +enum sci_status scic_sds_port_remove_phy( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +void scic_sds_port_setup_transports( + struct scic_sds_port *sci_port, + u32 device_id); + + +void scic_sds_port_deactivate_phy( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy, + bool do_notify_user); + +bool scic_sds_port_link_detected( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +void scic_sds_port_link_up( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +void scic_sds_port_link_down( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +enum sci_status scic_sds_port_start_io( + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req); + +enum sci_status scic_sds_port_complete_io( + struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req); + +enum sas_linkrate scic_sds_port_get_max_allowed_speed( + struct scic_sds_port *sci_port); + +void scic_sds_port_broadcast_change_received( + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); + +bool scic_sds_port_is_valid_phy_assignment( + struct scic_sds_port *sci_port, + u32 phy_index); + +void scic_sds_port_get_sas_address( + struct scic_sds_port *sci_port, + struct sci_sas_address *sas_address); + +void scic_sds_port_get_attached_sas_address( + struct scic_sds_port *sci_port, + struct sci_sas_address *sas_address); + +enum isci_status isci_port_get_state( struct isci_port *isci_port); -void isci_port_not_ready( - struct isci_host *isci_host, - struct isci_port *port); +void isci_port_formed(struct asd_sas_phy *); +void isci_port_deformed(struct asd_sas_phy *); void isci_port_init( struct isci_port *port, struct isci_host *host, int index); -void isci_port_hard_reset_complete( - struct isci_port *isci_port, - enum sci_status completion_status); - int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); - -void isci_port_stop_complete( - struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, - enum sci_status completion_status); - #endif /* !defined(_ISCI_PORT_H_) */ - diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c new file mode 100644 index 0000000..028ffa3 --- /dev/null +++ b/drivers/scsi/isci/port_config.c @@ -0,0 +1,826 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" +#include "timers.h" + +#define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100) + +enum SCIC_SDS_APC_ACTIVITY { + SCIC_SDS_APC_SKIP_PHY, + SCIC_SDS_APC_ADD_PHY, + SCIC_SDS_APC_START_TIMER, + + SCIC_SDS_APC_ACTIVITY_MAX +}; + +/* + * ****************************************************************************** + * General port configuration agent routines + * ****************************************************************************** */ + +/** + * + * @address_one: A SAS Address to be compared. + * @address_two: A SAS Address to be compared. + * + * Compare the two SAS Address and if SAS Address One is greater than SAS + * Address Two then return > 0 else if SAS Address One is less than SAS Address + * Two return < 0 Otherwise they are the same return 0 A signed value of x > 0 + * > y where x is returned for Address One > Address Two y is returned for + * Address One < Address Two 0 is returned ofr Address One = Address Two + */ +static s32 sci_sas_address_compare( + struct sci_sas_address address_one, + struct sci_sas_address address_two) +{ + if (address_one.high > address_two.high) { + return 1; + } else if (address_one.high < address_two.high) { + return -1; + } else if (address_one.low > address_two.low) { + return 1; + } else if (address_one.low < address_two.low) { + return -1; + } + + /* The two SAS Address must be identical */ + return 0; +} + +/** + * + * @controller: The controller object used for the port search. + * @phy: The phy object to match. + * + * This routine will find a matching port for the phy. This means that the + * port and phy both have the same broadcast sas address and same received sas + * address. The port address or the NULL if there is no matching + * port. port address if the port can be found to match the phy. + * NULL if there is no matching port for the phy. + */ +static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( + struct scic_sds_controller *scic, + struct scic_sds_phy *phy) +{ + u8 i; + struct sci_sas_address port_sas_address; + struct sci_sas_address port_attached_device_address; + struct sci_sas_address phy_sas_address; + struct sci_sas_address phy_attached_device_address; + + /* + * Since this phy can be a member of a wide port check to see if one or + * more phys match the sent and received SAS address as this phy in which + * case it should participate in the same port. + */ + scic_sds_phy_get_sas_address(phy, &phy_sas_address); + scic_sds_phy_get_attached_sas_address(phy, &phy_attached_device_address); + + for (i = 0; i < scic->logical_port_entries; i++) { + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_port *sci_port = &ihost->ports[i].sci; + + scic_sds_port_get_sas_address(sci_port, &port_sas_address); + scic_sds_port_get_attached_sas_address(sci_port, &port_attached_device_address); + + if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && + sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) + return sci_port; + } + + return NULL; +} + +/** + * + * @controller: This is the controller object that contains the port agent + * @port_agent: This is the port configruation agent for the controller. + * + * This routine will validate the port configuration is correct for the SCU + * hardware. The SCU hardware allows for port configurations as follows. LP0 + * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2, + * PE3) LP3 -> (PE3) enum sci_status SCI_SUCCESS the port configuration is valid for + * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION + * the port configuration is not valid for this port configuration agent. + */ +static enum sci_status scic_sds_port_configuration_agent_validate_ports( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent) +{ + struct isci_host *ihost = scic_to_ihost(controller); + struct sci_sas_address first_address; + struct sci_sas_address second_address; + + /* + * Sanity check the max ranges for all the phys the max index + * is always equal to the port range index */ + if (port_agent->phy_valid_port_range[0].max_index != 0 || + port_agent->phy_valid_port_range[1].max_index != 1 || + port_agent->phy_valid_port_range[2].max_index != 2 || + port_agent->phy_valid_port_range[3].max_index != 3) + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + + /* + * This is a request to configure a single x4 port or at least attempt + * to make all the phys into a single port */ + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 0 && + port_agent->phy_valid_port_range[2].min_index == 0 && + port_agent->phy_valid_port_range[3].min_index == 0) + return SCI_SUCCESS; + + /* + * This is a degenerate case where phy 1 and phy 2 are assigned + * to the same port this is explicitly disallowed by the hardware + * unless they are part of the same x4 port and this condition was + * already checked above. */ + if (port_agent->phy_valid_port_range[2].min_index == 1) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE3 can never have the same SAS Address unless they + * are part of the same x4 wide port and we have already checked + * for this condition. */ + scic_sds_phy_get_sas_address(&ihost->phys[0].sci, &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[3].sci, &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE1 are configured into a 2x1 ports make sure that the + * SAS Address for PE0 and PE2 are different since they can not be + * part of the same port. */ + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 1) { + scic_sds_phy_get_sas_address(&ihost->phys[0].sci, &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[2].sci, &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + /* + * PE2 and PE3 are configured into a 2x1 ports make sure that the + * SAS Address for PE1 and PE3 are different since they can not be + * part of the same port. */ + if (port_agent->phy_valid_port_range[2].min_index == 2 && + port_agent->phy_valid_port_range[3].min_index == 3) { + scic_sds_phy_get_sas_address(&ihost->phys[1].sci, &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[3].sci, &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + return SCI_SUCCESS; +} + +/* + * ****************************************************************************** + * Manual port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This routine will verify that all of the phys in the same port are using the + * same SAS address. + */ +static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent) +{ + struct isci_host *ihost = scic_to_ihost(controller); + u32 phy_mask; + u32 assigned_phy_mask; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + u8 port_index; + u8 phy_index; + + assigned_phy_mask = 0; + sas_address.high = 0; + sas_address.low = 0; + + for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { + phy_mask = controller->oem_parameters.sds1.ports[port_index].phy_mask; + + if (!phy_mask) + continue; + /* + * Make sure that one or more of the phys were not already assinged to + * a different port. */ + if ((phy_mask & ~assigned_phy_mask) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* Find the starting phy index for this round through the loop */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + &sas_address); + + /* + * The phy_index can be used as the starting point for the + * port range since the hardware starts all logical ports + * the same as the PE index. */ + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + if (phy_index != port_index) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + break; + } + + /* + * See how many additional phys are being added to this logical port. + * Note: We have not moved the current phy_index so we will actually + * compare the startting phy with itself. + * This is expected and required to add the phy to the port. */ + while (phy_index < SCI_MAX_PHYS) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + &phy_assigned_address); + + if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { + /* + * The phy mask specified that this phy is part of the same port + * as the starting phy and it is not so fail this configuration */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + scic_sds_port_add_phy(&ihost->ports[port_index].sci, + &ihost->phys[phy_index].sci); + + assigned_phy_mask |= (1 << phy_index); + } + + phy_index++; + } + + return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); +} + +/** + * + * + * This timer routine is used to allow the SCI User to rediscover or change + * device objects before a new series of link up notifications because a link + * down has allowed a better port configuration. + */ +static void scic_sds_mpc_agent_timeout_handler(void *object) +{ + u8 index; + struct scic_sds_controller *scic = object; + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_port_configuration_agent *port_agent = &scic->port_agent; + u16 configure_phy_mask; + + port_agent->timer_pending = false; + + /* Find the mask of phys that are reported read but as yet unconfigured into a port */ + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct scic_sds_phy *sci_phy = &ihost->phys[index].sci; + + if (configure_phy_mask & (1 << index)) { + port_agent->link_up_handler(scic, port_agent, + scic_sds_phy_get_port(sci_phy), + sci_phy); + } + } +} + +/** + * + * @controller: This is the controller object that receives the link up + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @phy: This is the phy object which has gone ready. + * + * This method handles the manual port configuration link up notifications. + * Since all ports and phys are associate at initialization time we just turn + * around and notifiy the port object that there is a link up. If this PHY is + * not associated with a port there is no action taken. Is it possible to get a + * link up notification from a phy that has no assocoated port? + */ +static void scic_sds_mpc_agent_link_up( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + /* + * If the port has an invalid handle then the phy was not assigned to + * a port. This is because the phy was not given the same SAS Address + * as the other PHYs in the port. */ + if (port != NULL) { + port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy)); + + scic_sds_port_link_up(port, phy); + + if ((port->active_phy_mask & (1 << scic_sds_phy_get_index(phy))) != 0) { + port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(phy)); + } + } +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. The port is an invalid + * handle only if the phy was never port of this port. This happens when + * the phy is not broadcasting the same SAS address as the other phys in the + * assigned port. + * @phy: This is the phy object which has gone link down. + * + * This function handles the manual port configuration link down notifications. + * Since all ports and phys are associated at initialization time we just turn + * around and notifiy the port object of the link down event. If this PHY is + * not associated with a port there is no action taken. Is it possible to get a + * link down notification from a phy that has no assocoated port? + */ +static void scic_sds_mpc_agent_link_down( + struct scic_sds_controller *scic, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + if (sci_port != NULL) { + /* + * If we can form a new port from the remainder of the phys + * then we want to start the timer to allow the SCI User to + * cleanup old devices and rediscover the port before + * rebuilding the port with the phys that remain in the ready + * state. + */ + port_agent->phy_ready_mask &= + ~(1 << scic_sds_phy_get_index(sci_phy)); + port_agent->phy_configured_mask &= + ~(1 << scic_sds_phy_get_index(sci_phy)); + + /* + * Check to see if there are more phys waiting to be + * configured into a port. If there are allow the SCI User + * to tear down this port, if necessary, and then reconstruct + * the port after the timeout. + */ + if ((port_agent->phy_configured_mask == 0x0000) && + (port_agent->phy_ready_mask != 0x0000) && + !port_agent->timer_pending) { + port_agent->timer_pending = true; + + isci_timer_start(port_agent->timer, + SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); + } + + scic_sds_port_link_down(sci_port, sci_phy); + } +} + +/* + * ****************************************************************************** + * Automatic port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This routine will verify that the phys are assigned a valid SAS address for + * automatic port configuration mode. + */ +static enum sci_status scic_sds_apc_agent_validate_phy_configuration( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent) +{ + u8 phy_index; + u8 port_index; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + struct isci_host *ihost = scic_to_ihost(controller); + + phy_index = 0; + + while (phy_index < SCI_MAX_PHYS) { + port_index = phy_index; + + /* Get the assigned SAS Address for the first PHY on the controller. */ + scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + &sas_address); + + while (++phy_index < SCI_MAX_PHYS) { + scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + &phy_assigned_address); + + /* Verify each of the SAS address are all the same for every PHY */ + if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) { + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + } else { + port_agent->phy_valid_port_range[phy_index].min_index = phy_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + break; + } + } + } + + return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); +} + +/** + * + * @controller: This is the controller that to which the port agent is assigned. + * @port_agent: This is the port agent that is requesting the timer start + * operation. + * @phy: This is the phy that has caused the timer operation to be scheduled. + * + * This routine will restart the automatic port configuration timeout timer for + * the next time period. This could be caused by either a link down event or a + * link up event where we can not yet tell to which port a phy belongs. + */ +static inline void scic_sds_apc_agent_start_timer( + struct scic_sds_controller *scic, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_phy *sci_phy, + u32 timeout) +{ + if (port_agent->timer_pending) + isci_timer_stop(port_agent->timer); + + port_agent->timer_pending = true; + + isci_timer_start(port_agent->timer, timeout); +} + +/** + * + * @controller: This is the controller object that receives the link up + * notification. + * @phy: This is the phy object which has gone link up. + * + * This method handles the automatic port configuration for link up + * notifications. + */ +static void scic_sds_apc_agent_configure_ports( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_phy *phy, + bool start_timer) +{ + u8 port_index; + enum sci_status status; + struct scic_sds_port *port; + enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; + struct isci_host *ihost = scic_to_ihost(controller); + + port = scic_sds_port_configuration_agent_find_port(controller, phy); + + if (port != NULL) { + if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) + apc_activity = SCIC_SDS_APC_ADD_PHY; + else + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } else { + /* + * There is no matching Port for this PHY so lets search through the + * Ports and see if we can add the PHY to its own port or maybe start + * the timer and wait to see if a wider port can be made. + * + * Note the break when we reach the condition of the port id == phy id */ + for ( + port_index = port_agent->phy_valid_port_range[phy->phy_index].min_index; + port_index <= port_agent->phy_valid_port_range[phy->phy_index].max_index; + port_index++ + ) { + + port = &ihost->ports[port_index].sci; + + /* First we must make sure that this PHY can be added to this Port. */ + if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) { + /* + * Port contains a PHY with a greater PHY ID than the current + * PHY that has gone link up. This phy can not be part of any + * port so skip it and move on. */ + if (port->active_phy_mask > (1 << phy->phy_index)) { + apc_activity = SCIC_SDS_APC_SKIP_PHY; + break; + } + + /* + * We have reached the end of our Port list and have not found + * any reason why we should not either add the PHY to the port + * or wait for more phys to become active. */ + if (port->physical_port_index == phy->phy_index) { + /* + * The Port either has no active PHYs. + * Consider that if the port had any active PHYs we would have + * or active PHYs with + * a lower PHY Id than this PHY. */ + if (apc_activity != SCIC_SDS_APC_START_TIMER) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + break; + } + + /* + * The current Port has no active PHYs and this PHY could be part + * of this Port. Since we dont know as yet setup to start the + * timer and see if there is a better configuration. */ + if (port->active_phy_mask == 0) { + apc_activity = SCIC_SDS_APC_START_TIMER; + } + } else if (port->active_phy_mask != 0) { + /* + * The Port has an active phy and the current Phy can not + * participate in this port so skip the PHY and see if + * there is a better configuration. */ + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } + } + } + + /* + * Check to see if the start timer operations should instead map to an + * add phy operation. This is caused because we have been waiting to + * add a phy to a port but could not becuase the automatic port + * configuration engine had a choice of possible ports for the phy. + * Since we have gone through a timeout we are going to restrict the + * choice to the smallest possible port. */ + if ( + (start_timer == false) + && (apc_activity == SCIC_SDS_APC_START_TIMER) + ) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + switch (apc_activity) { + case SCIC_SDS_APC_ADD_PHY: + status = scic_sds_port_add_phy(port, phy); + + if (status == SCI_SUCCESS) { + port_agent->phy_configured_mask |= (1 << phy->phy_index); + } + break; + + case SCIC_SDS_APC_START_TIMER: + scic_sds_apc_agent_start_timer( + controller, port_agent, phy, SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION + ); + break; + + case SCIC_SDS_APC_SKIP_PHY: + default: + /* do nothing the PHY can not be made part of a port at this time. */ + break; + } +} + +/** + * scic_sds_apc_agent_link_up - handle apc link up events + * @scic: This is the controller object that receives the link up + * notification. + * @sci_port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @sci_phy: This is the phy object which has gone link up. + * + * This method handles the automatic port configuration for link up + * notifications. Is it possible to get a link down notification from a phy + * that has no assocoated port? + */ +static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + u8 phy_index = sci_phy->phy_index; + + if (!sci_port) { + /* the phy is not the part of this port */ + port_agent->phy_ready_mask |= 1 << phy_index; + scic_sds_apc_agent_configure_ports(scic, port_agent, sci_phy, true); + } else { + /* the phy is already the part of the port */ + u32 port_state = sci_port->state_machine.current_state_id; + + /* if the PORT'S state is resetting then the link up is from + * port hard reset in this case, we need to tell the port + * that link up is recieved + */ + BUG_ON(port_state != SCI_BASE_PORT_STATE_RESETTING); + port_agent->phy_ready_mask |= 1 << phy_index; + scic_sds_port_link_up(sci_port, sci_phy); + } +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @phy: This is the phy object which has gone link down. + * + * This method handles the automatic port configuration link down + * notifications. not associated with a port there is no action taken. Is it + * possible to get a link down notification from a phy that has no assocoated + * port? + */ +static void scic_sds_apc_agent_link_down( + struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *port, + struct scic_sds_phy *phy) +{ + port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy)); + + if (port != NULL) { + if (port_agent->phy_configured_mask & (1 << phy->phy_index)) { + enum sci_status status; + + status = scic_sds_port_remove_phy(port, phy); + + if (status == SCI_SUCCESS) { + port_agent->phy_configured_mask &= ~(1 << phy->phy_index); + } + } + } +} + +/* configure the phys into ports when the timer fires */ +static void scic_sds_apc_agent_timeout_handler(void *object) +{ + u32 index; + struct scic_sds_port_configuration_agent *port_agent; + struct scic_sds_controller *scic = object; + struct isci_host *ihost = scic_to_ihost(scic); + u16 configure_phy_mask; + + port_agent = scic_sds_controller_get_port_configuration_agent(scic); + + port_agent->timer_pending = false; + + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + if (!configure_phy_mask) + return; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if ((configure_phy_mask & (1 << index)) == 0) + continue; + + scic_sds_apc_agent_configure_ports(scic, port_agent, + &ihost->phys[index].sci, false); + } +} + +/* + * ****************************************************************************** + * Public port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This method will construct the port configuration agent for operation. This + * call is universal for both manual port configuration and automatic port + * configuration modes. + */ +void scic_sds_port_configuration_agent_construct( + struct scic_sds_port_configuration_agent *port_agent) +{ + u32 index; + + port_agent->phy_configured_mask = 0x00; + port_agent->phy_ready_mask = 0x00; + + port_agent->link_up_handler = NULL; + port_agent->link_down_handler = NULL; + + port_agent->timer_pending = false; + port_agent->timer = NULL; + + for (index = 0; index < SCI_MAX_PORTS; index++) { + port_agent->phy_valid_port_range[index].min_index = 0; + port_agent->phy_valid_port_range[index].max_index = 0; + } +} + +enum sci_status scic_sds_port_configuration_agent_initialize( + struct scic_sds_controller *scic, + struct scic_sds_port_configuration_agent *port_agent) +{ + enum sci_status status = SCI_SUCCESS; + enum scic_port_configuration_mode mode; + struct isci_host *ihost = scic_to_ihost(scic); + + mode = scic->oem_parameters.sds1.controller.mode_type; + + if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + status = scic_sds_mpc_agent_validate_phy_configuration( + scic, port_agent); + + port_agent->link_up_handler = scic_sds_mpc_agent_link_up; + port_agent->link_down_handler = scic_sds_mpc_agent_link_down; + + port_agent->timer = isci_timer_create( + ihost, + scic, + scic_sds_mpc_agent_timeout_handler); + } else { + status = scic_sds_apc_agent_validate_phy_configuration( + scic, port_agent); + + port_agent->link_up_handler = scic_sds_apc_agent_link_up; + port_agent->link_down_handler = scic_sds_apc_agent_link_down; + + port_agent->timer = isci_timer_create( + ihost, + scic, + scic_sds_apc_agent_timeout_handler); + } + + /* Make sure we have actually gotten a timer */ + if ((status == SCI_SUCCESS) && (port_agent->timer == NULL)) { + dev_err(scic_to_dev(scic), + "%s: Controller 0x%p automatic port configuration " + "agent could not get timer.\n", + __func__, + scic); + + status = SCI_FAILURE; + } + + return status; +} diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index f4ef19a..7e3e6d7 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -60,15 +60,117 @@ #include #include "isci.h" -struct isci_orom *isci_request_oprom(struct pci_dev *pdev); +#define SCIC_SDS_PARM_NO_SPEED 0 + +/* generation 1 (i.e. 1.5 Gb/s) */ +#define SCIC_SDS_PARM_GEN1_SPEED 1 + +/* generation 2 (i.e. 3.0 Gb/s) */ +#define SCIC_SDS_PARM_GEN2_SPEED 2 + +/* generation 3 (i.e. 6.0 Gb/s) */ +#define SCIC_SDS_PARM_GEN3_SPEED 3 +#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED + +/* parameters that can be set by module parameters */ +struct scic_sds_user_parameters { + struct sci_phy_user_params { + /** + * This field specifies the NOTIFY (ENABLE SPIN UP) primitive + * insertion frequency for this phy index. + */ + u32 notify_enable_spin_up_insertion_frequency; + + /** + * This method specifies the number of transmitted DWORDs within which + * to transmit a single ALIGN primitive. This value applies regardless + * of what type of device is attached or connection state. A value of + * 0 indicates that no ALIGN primitives will be inserted. + */ + u16 align_insertion_frequency; + + /** + * This method specifies the number of transmitted DWORDs within which + * to transmit 2 ALIGN primitives. This applies for SAS connections + * only. A minimum value of 3 is required for this field. + */ + u16 in_connection_align_insertion_frequency; + + /** + * This field indicates the maximum speed generation to be utilized + * by phys in the supplied port. + * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s). + * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s). + * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s). + */ + u8 max_speed_generation; + + } phys[SCI_MAX_PHYS]; + + /** + * This field specifies the maximum number of direct attached devices + * that can have power supplied to them simultaneously. + */ + u8 max_number_concurrent_device_spin_up; + + /** + * This field specifies the number of seconds to allow a phy to consume + * power before yielding to another phy. + * + */ + u8 phy_spin_up_delay_interval; + + /** + * These timer values specifies how long a link will remain open with no + * activity in increments of a microsecond, it can be in increments of + * 100 microseconds if the upper most bit is set. + * + */ + u16 stp_inactivity_timeout; + u16 ssp_inactivity_timeout; + + /** + * These timer values specifies how long a link will remain open in increments + * of 100 microseconds. + * + */ + u16 stp_max_occupancy_timeout; + u16 ssp_max_occupancy_timeout; + + /** + * This timer value specifies how long a link will remain open with no + * outbound traffic in increments of a microsecond. + * + */ + u8 no_outbound_task_timeout; + +}; + +/* XXX kill this union */ +union scic_user_parameters { + /** + * This field specifies the user parameters specific to the + * Storage Controller Unit (SCU) Driver Standard (SDS) version + * 1. + */ + struct scic_sds_user_parameters sds1; +}; + +#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0 +#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF +#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 + +struct scic_sds_oem_params; +int scic_oem_parameters_validate(struct scic_sds_oem_params *oem); union scic_oem_parameters; -struct isci_orom; +void scic_oem_parameters_get(struct scic_sds_controller *scic, + union scic_oem_parameters *oem); -enum sci_status isci_parse_oem_parameters( - union scic_oem_parameters *oem_params, - struct isci_orom *orom, - int scu_index); +struct isci_orom; +struct isci_orom *isci_request_oprom(struct pci_dev *pdev); +enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem, + struct isci_orom *orom, int scu_index); struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw); struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); @@ -153,6 +255,16 @@ struct scic_sds_oem_params { } phys[SCI_MAX_PHYS]; } __attribute__ ((packed)); +/* XXX kill this union */ +union scic_oem_parameters { + /** + * This field specifies the OEM parameters specific to the + * Storage Controller Unit (SCU) Driver Standard (SDS) version + * 1. + */ + struct scic_sds_oem_params sds1; +}; + struct isci_orom { struct sci_bios_oem_param_block_hdr hdr; struct scic_sds_oem_params ctrl[SCI_MAX_CONTROLLERS]; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 2baa215..0bb639d 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -57,8 +57,6 @@ #include "port.h" #include "remote_device.h" #include "request.h" -#include "scic_port.h" -#include "scic_sds_port.h" #include "remote_node_context.h" #include "scu_event_codes.h" #include "task.h" diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 35231e7..aef258b 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -55,7 +55,6 @@ #include "host.h" #include "state_machine.h" -#include "scic_sds_port.h" #include "remote_device.h" #include "remote_node_context.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 857ad06..48e2dac 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -54,7 +54,6 @@ */ #include "isci.h" -#include "scic_port.h" #include "task.h" #include "request.h" #include "sata.h" -- cgit v0.10.2 From f139303d17c47eff4c5b5407dee0a6d43e8fd146 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2011 02:28:47 -0700 Subject: isci: merge ssp task management substates into primary state machine Remove usage of the request substate machine for ssp task management requests identified by: ireq->ttype == tmf_task && dev->dev_type == SAS_END_DEV; The only routine that checks the base 'started' state is scic_sds_io_request_tc_completion which calls the substate machine handler if we are not in the 'started' state or we are 'started' and no substate machine is defined. This routine requires no conversion because we have transitioned out of 'started' and the substate routine will be called naturally as a result. There are also no side effects of this conversion on exiting the 'started', state because it only stops the substate machine, which is no longer relevant for this transaction type. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 48218ca..43d2c05 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -7,6 +7,5 @@ isci-objs := init.o phy.o request.o sata.o \ remote_node_table.o \ unsolicited_frame_control.o \ stp_request.o \ - ssp_request.o \ smp_request.o \ port_config.o \ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 48e2dac..5f51681 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -656,7 +656,7 @@ enum sci_status scic_sds_io_request_frame_handler( * @sci_req: This parameter specifies the request object for which to copy * the response data. */ -void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) +static void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) { void *resp_buf; u32 len; @@ -978,7 +978,6 @@ scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completi sci_base_state_machine_get_state(&request->state_machine)); return SCI_FAILURE_INVALID_STATE; - } /* @@ -1151,9 +1150,119 @@ static enum sci_status scic_sds_request_aborting_state_frame_handler( return SCI_SUCCESS; } +/** + * This method processes the completions transport layer (TL) status to + * determine if the RAW task management frame was sent successfully. If the + * raw frame was sent successfully, then the state for the task request + * transitions to waiting for a response frame. + * @sci_req: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + SCI_SUCCESS); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + /* + * Currently, the decision is to simply allow the task request to + * timeout if the task IU wasn't received successfully. + * There is a potential for receiving multiple task responses if we + * decide to send the task IU again. */ + dev_warn(scic_to_dev(sci_req->owning_controller), + "%s: TaskRequest:0x%p CompletionCode:%x - " + "ACK/NAK timeout\n", + __func__, + sci_req, + completion_code); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +/** + * This method is responsible for processing a terminate/abort request for this + * TC while the request is waiting for the task management response + * unsolicited frame. + * @sci_req: This parameter specifies the request for which the + * termination was requested. + * + * This method returns an indication as to whether the abort request was + * successfully handled. need to update to ensure the received UF doesn't cause + * damage to subsequent requests (i.e. put the extended tag in a holding + * pattern for this particular device). + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler( + struct scic_sds_request *request) +{ + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_ABORTING); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + return SCI_SUCCESS; +} + +/** + * This method processes an unsolicited frame while the task mgmt request is + * waiting for a response frame. It will copy the response data, release + * the unsolicited frame, and transition the request to the + * SCI_BASE_REQUEST_STATE_COMPLETED state. + * @sci_req: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This method returns an indication of whether the TC response frame was + * handled successfully or not. SCI_SUCCESS Currently this value is always + * returned and indicates successful processing of the TC response. Should + * probably update to check frame type and make sure it is a response frame. + */ +static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler( + struct scic_sds_request *request, + u32 frame_index) +{ + scic_sds_io_request_copy_response(request); + + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + scic_sds_controller_release_frame(request->owning_controller, + frame_index); + return SCI_SUCCESS; +} + static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { - [SCI_BASE_REQUEST_STATE_INITIAL] = { - }, + [SCI_BASE_REQUEST_STATE_INITIAL] = { }, [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { .start_handler = scic_sds_request_constructed_state_start_handler, .abort_handler = scic_sds_request_constructed_state_abort_handler, @@ -1163,6 +1272,14 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, .frame_handler = scic_sds_request_started_state_frame_handler, }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, + }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { + .abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, + .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, + }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .complete_handler = scic_sds_request_completed_state_complete_handler, }, @@ -1171,8 +1288,7 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, .frame_handler = scic_sds_request_aborting_state_frame_handler, }, - [SCI_BASE_REQUEST_STATE_FINAL] = { - }, + [SCI_BASE_REQUEST_STATE_FINAL] = { }, }; @@ -1919,6 +2035,9 @@ static void scic_sds_request_constructed_state_enter(void *object) static void scic_sds_request_started_state_enter(void *object) { struct scic_sds_request *sci_req = object; + struct sci_base_state_machine *sm = &sci_req->state_machine; + struct isci_request *ireq = sci_req_to_ireq(sci_req); + struct domain_device *dev = sci_dev_to_domain(sci_req->target_device); SET_STATE_HANDLER( sci_req, @@ -1926,9 +2045,13 @@ static void scic_sds_request_started_state_enter(void *object) SCI_BASE_REQUEST_STATE_STARTED ); - /* - * Most of the request state machines have a started substate machine so - * start its execution on the entry to the started state. */ + if (ireq->ttype == tmf_task && dev->dev_type == SAS_END_DEV) + sci_base_state_machine_change_state(sm, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION); + + /* Most of the request state machines have a started substate machine so + * start its execution on the entry to the started state. + */ if (sci_req->has_started_substate_machine == true) sci_base_state_machine_start(&sci_req->started_substate_machine); } @@ -2026,6 +2149,30 @@ static void scic_sds_request_final_state_enter(void *object) ); } +static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION + ); +} + +static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE + ); +} + static const struct sci_base_state scic_sds_request_state_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { .enter_state = scic_sds_request_initial_state_enter, @@ -2037,6 +2184,12 @@ static const struct sci_base_state scic_sds_request_state_table[] = { .enter_state = scic_sds_request_started_state_enter, .exit_state = scic_sds_request_started_state_exit }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { + .enter_state = scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter, + }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { + .enter_state = scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter, + }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .enter_state = scic_sds_request_completed_state_enter, }, @@ -2126,19 +2279,9 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, /* Build the common part of the request */ scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); - if (dev->dev_type == SAS_END_DEV) { + if (dev->dev_type == SAS_END_DEV) scic_sds_ssp_task_request_assign_buffers(sci_req); - - sci_req->has_started_substate_machine = true; - - /* Construct the started sub-state machine. */ - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - sci_req, - scic_sds_io_request_started_task_mgmt_substate_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION - ); - } else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) scic_sds_stp_request_assign_buffers(sci_req); else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 932ea76..b5c5b06 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -296,6 +296,20 @@ enum sci_base_request_states { SCI_BASE_REQUEST_STATE_STARTED, /** + * The AWAIT_TC_COMPLETION sub-state indicates that the started raw + * task management request is waiting for the transmission of the + * initial frame (i.e. command, task, etc.). + */ + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION, + + /** + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE, + + /** * This state indicates that the request has completed. * This state is entered from the STARTED state. This state is entered from * the ABORTING state. @@ -451,7 +465,6 @@ void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req); void scic_sds_smp_request_assign_buffers(struct scic_sds_request *sci_req); enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *sci_req); -void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, u32 event_code); enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, @@ -459,29 +472,6 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r enum sci_status scic_sds_task_request_terminate(struct scic_sds_request *sci_req); enum sci_status scic_sds_request_started_state_abort_handler(struct scic_sds_request *sci_req); -/** - * enum _scic_sds_io_request_started_task_mgmt_substates - This enumeration - * depicts all of the substates for a task management request to be - * performed in the STARTED super-state. - * - * - */ -enum scic_sds_raw_request_started_task_mgmt_substates { - /** - * The AWAIT_TC_COMPLETION sub-state indicates that the started raw - * task management request is waiting for the transmission of the - * initial frame (i.e. command, task, etc.). - */ - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION, - - /** - * This sub-state indicates that the started task management request - * is waiting for the reception of an unsolicited frame - * (i.e. response IU). - */ - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE, -}; - /** * enum _scic_sds_smp_request_started_substates - This enumeration depicts all diff --git a/drivers/scsi/isci/ssp_request.c b/drivers/scsi/isci/ssp_request.c deleted file mode 100644 index 4b6317a..0000000 --- a/drivers/scsi/isci/ssp_request.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "host.h" -#include "request.h" -#include "state_machine.h" -#include "scu_task_context.h" -#include "scu_completion_codes.h" - -/** - * This method processes the completions transport layer (TL) status to - * determine if the RAW task management frame was sent successfully. If the - * raw frame was sent successfully, then the state for the task request - * transitions to waiting for a response frame. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE - ); - break; - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): - /* - * Currently, the decision is to simply allow the task request to - * timeout if the task IU wasn't received successfully. - * There is a potential for receiving multiple task responses if we - * decide to send the task IU again. */ - dev_warn(scic_to_dev(sci_req->owning_controller), - "%s: TaskRequest:0x%p CompletionCode:%x - " - "ACK/NAK timeout\n", - __func__, - sci_req, - completion_code); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -/** - * This method is responsible for processing a terminate/abort request for this - * TC while the request is waiting for the task management response - * unsolicited frame. - * @sci_req: This parameter specifies the request for which the - * termination was requested. - * - * This method returns an indication as to whether the abort request was - * successfully handled. need to update to ensure the received UF doesn't cause - * damage to subsequent requests (i.e. put the extended tag in a holding - * pattern for this particular device). - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler( - struct scic_sds_request *request) -{ - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - return SCI_SUCCESS; -} - -/** - * This method processes an unsolicited frame while the task mgmt request is - * waiting for a response frame. It will copy the response data, release - * the unsolicited frame, and transition the request to the - * SCI_BASE_REQUEST_STATE_COMPLETED state. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This method returns an indication of whether the TC response frame was - * handled successfully or not. SCI_SUCCESS Currently this value is always - * returned and indicates successful processing of the TC response. Should - * probably update to check frame type and make sure it is a response frame. - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - scic_sds_io_request_copy_response(request); - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - scic_sds_controller_release_frame(request->owning_controller, - frame_index); - return SCI_SUCCESS; -} - -static const struct scic_sds_io_request_state_handler scic_sds_ssp_task_request_started_substate_handler_table[] = { - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, - }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, - .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, - } -}; - -/** - * This method performs the actions required when entering the - * SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION - * sub-state. This includes setting the IO request state handlers for this - * sub-state. - * @object: This parameter specifies the request object for which the sub-state - * change is occurring. - * - * none. - */ -static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_ssp_task_request_started_substate_handler_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION - ); -} - -/** - * This method performs the actions required when entering the - * SCIC_SDS_IO_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This - * includes setting the IO request state handlers for this sub-state. - * @object: This parameter specifies the request object for which the sub-state - * change is occurring. - * - * none. - */ -static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_ssp_task_request_started_substate_handler_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE - ); -} - -const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[] = { - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .enter_state = scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter, - }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .enter_state = scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter, - }, -}; - -- cgit v0.10.2 From c72086e3c2897eaca5b99c005dd9844fdc784981 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2011 02:28:48 -0700 Subject: isci: merge smp request substates into primary state machine Remove usage of the request substate machine for smp requests identified by: task->task_proto == SAS_PROTOCOL_SMP While merging over the smp_request infrastructure noticed that all the assign buffer implementations are now equal, so moved it to scic_sds_general_request_construct. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 43d2c05..be2b67d0 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -7,5 +7,4 @@ isci-objs := init.o phy.o request.o sata.o \ remote_node_table.o \ unsolicited_frame_control.o \ stp_request.o \ - smp_request.o \ port_config.o \ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 5f51681..5201dc5 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -158,12 +158,6 @@ void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) } } -static void scic_sds_ssp_io_request_assign_buffers(struct scic_sds_request *sci_req) -{ - if (sci_req->was_tag_assigned_by_user == false) - sci_req->task_context_buffer = &sci_req->tc; -} - static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req) { struct ssp_cmd_iu *cmd_iu; @@ -341,12 +335,6 @@ static void scu_ssp_io_request_construct_task_context( scic_sds_request_build_sgl(sci_req); } -static void scic_sds_ssp_task_request_assign_buffers(struct scic_sds_request *sci_req) -{ - if (sci_req->was_tag_assigned_by_user == false) - sci_req->task_context_buffer = &sci_req->tc; -} - /** * This method will fill in the SCU Task Context for a SSP Task request. The * following important settings are utilized: -# priority == @@ -1261,6 +1249,196 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler return SCI_SUCCESS; } +/** + * This method processes an abnormal TC completion while the SMP request is + * waiting for a response frame. It decides what happened to the IO based + * on TC completion status. + * @sci_req: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* + * In the AWAIT RESPONSE state, any TC completion is unexpected. + * but if the TC has success status, we complete the IO anyway. */ + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + /* + * These status has been seen in a specific LSI expander, which sometimes + * is not able to send smp response within 2 ms. This causes our hardware + * break the connection and set TC completion with one of these SMP_XXX_XX_ERR + * status. For these type of error, we ask scic user to retry the request. */ + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +/* + * This function processes an unsolicited frame while the SMP request is waiting + * for a response frame. It will copy the response data, release the + * unsolicited frame, and transition the request to the + * SCI_BASE_REQUEST_STATE_COMPLETED state. + * @sci_req: This parameter specifies the request for which the + * unsolicited frame was received. + * @frame_index: This parameter indicates the unsolicited frame index that + * should contain the response. + * + * This function returns an indication of whether the response frame was handled + * successfully or not. SCI_SUCCESS Currently this value is always returned and + * indicates successful processing of the TC response. + */ +static enum sci_status +scic_sds_smp_request_await_response_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + void *frame_header; + struct smp_resp *rsp_hdr = &sci_req->smp.rsp; + ssize_t word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); + + status = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_request_get_controller(sci_req)->uf_control), + frame_index, + &frame_header); + + /* byte swap the header. */ + sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); + + if (rsp_hdr->frame_type == SMP_RESPONSE) { + void *smp_resp; + + status = scic_sds_unsolicited_frame_control_get_buffer( + &(scic_sds_request_get_controller(sci_req)->uf_control), + frame_index, + &smp_resp); + + word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / + sizeof(u32); + + sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, + smp_resp, word_cnt); + + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); + } else { + /* This was not a response frame why did it get forwarded? */ + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: SCIC SMP Request 0x%p received unexpected frame " + "%d type 0x%02x\n", + __func__, + sci_req, + frame_index, + rsp_hdr->frame_type); + + scic_sds_request_set_status( + sci_req, + SCU_TASK_DONE_SMP_FRM_TYPE_ERR, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + } + + scic_sds_controller_release_frame(sci_req->owning_controller, + frame_index); + + return SCI_SUCCESS; +} + +/** + * This method processes the completions transport layer (TL) status to + * determine if the SMP request was sent successfully. If the SMP request + * was sent successfully, then the state for the SMP request transits to + * waiting for a response frame. + * @sci_req: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { }, [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { @@ -1280,6 +1458,15 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han .abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, + .frame_handler = scic_sds_smp_request_await_response_frame_handler, + }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, + }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .complete_handler = scic_sds_request_completed_state_complete_handler, }, @@ -2038,6 +2225,12 @@ static void scic_sds_request_started_state_enter(void *object) struct sci_base_state_machine *sm = &sci_req->state_machine; struct isci_request *ireq = sci_req_to_ireq(sci_req); struct domain_device *dev = sci_dev_to_domain(sci_req->target_device); + struct sas_task *task; + + /* XXX as hch said always creating an internal sas_task for tmf + * requests would simplify the driver + */ + task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL; SET_STATE_HANDLER( sci_req, @@ -2045,15 +2238,19 @@ static void scic_sds_request_started_state_enter(void *object) SCI_BASE_REQUEST_STATE_STARTED ); - if (ireq->ttype == tmf_task && dev->dev_type == SAS_END_DEV) - sci_base_state_machine_change_state(sm, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION); - /* Most of the request state machines have a started substate machine so * start its execution on the entry to the started state. */ if (sci_req->has_started_substate_machine == true) sci_base_state_machine_start(&sci_req->started_substate_machine); + + if (!task && dev->dev_type == SAS_END_DEV) { + sci_base_state_machine_change_state(sm, + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION); + } else if (task && task->task_proto == SAS_PROTOCOL_SMP) { + sci_base_state_machine_change_state(sm, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE); + } } /** @@ -2173,6 +2370,28 @@ static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_e ); } +static void scic_sds_smp_request_started_await_response_substate_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE + ); +} + +static void scic_sds_smp_request_started_await_tc_completion_substate_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION + ); +} + static const struct sci_base_state scic_sds_request_state_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { .enter_state = scic_sds_request_initial_state_enter, @@ -2190,6 +2409,12 @@ static const struct sci_base_state scic_sds_request_state_table[] = { [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { .enter_state = scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter, }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { + .enter_state = scic_sds_smp_request_started_await_response_substate_enter, + }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { + .enter_state = scic_sds_smp_request_started_await_tc_completion_substate_enter, + }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .enter_state = scic_sds_request_completed_state_enter, }, @@ -2225,7 +2450,7 @@ static void scic_sds_general_request_construct(struct scic_sds_controller *scic, if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { sci_req->was_tag_assigned_by_user = false; - sci_req->task_context_buffer = NULL; + sci_req->task_context_buffer = &sci_req->tc; } else { sci_req->was_tag_assigned_by_user = true; @@ -2245,26 +2470,20 @@ scic_io_request_construct(struct scic_sds_controller *scic, /* Build the common part of the request */ scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); - if (sci_dev->rnc.remote_node_index == - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; if (dev->dev_type == SAS_END_DEV) - scic_sds_ssp_io_request_assign_buffers(sci_req); - else if ((dev->dev_type == SATA_DEV) || - (dev->tproto & SAS_PROTOCOL_STP)) { - scic_sds_stp_request_assign_buffers(sci_req); + /* pass */; + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd)); - } else if (dev_is_expander(dev)) { - scic_sds_smp_request_assign_buffers(sci_req); + else if (dev_is_expander(dev)) memset(&sci_req->smp.cmd, 0, sizeof(sci_req->smp.cmd)); - } else - status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; - if (status == SCI_SUCCESS) { - memset(sci_req->task_context_buffer, 0, - offsetof(struct scu_task_context, sgl_pair_ab)); - } + memset(sci_req->task_context_buffer, 0, + offsetof(struct scu_task_context, sgl_pair_ab)); return status; } @@ -2279,17 +2498,12 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, /* Build the common part of the request */ scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); - if (dev->dev_type == SAS_END_DEV) - scic_sds_ssp_task_request_assign_buffers(sci_req); - else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) - scic_sds_stp_request_assign_buffers(sci_req); - else - status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - - if (status == SCI_SUCCESS) { + if (dev->dev_type == SAS_END_DEV || + dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { sci_req->is_task_management_request = true; memset(sci_req->task_context_buffer, 0, sizeof(struct scu_task_context)); - } + } else + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; return status; } @@ -2341,6 +2555,174 @@ static enum sci_status isci_request_stp_request_construct( } /* + * This function will fill in the SCU Task Context for a SMP request. The + * following important settings are utilized: -# task_type == + * SCU_TASK_TYPE_SMP. This simply indicates that a normal request type + * (i.e. non-raw frame) is being utilized to perform task management. -# + * control_frame == 1. This ensures that the proper endianess is set so + * that the bytes are transmitted in the right order for a smp request frame. + * @sci_req: This parameter specifies the smp request object being + * constructed. + * + */ +static void +scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, + struct smp_req *smp_req) +{ + dma_addr_t dma_addr; + struct scic_sds_controller *scic; + struct scic_sds_remote_device *sci_dev; + struct scic_sds_port *sci_port; + struct scu_task_context *task_context; + ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32); + + /* byte swap the smp request. */ + sci_swab32_cpy(&sci_req->smp.cmd, smp_req, + word_cnt); + + task_context = scic_sds_request_get_task_context(sci_req); + + scic = scic_sds_request_get_controller(sci_req); + sci_dev = scic_sds_request_get_device(sci_req); + sci_port = scic_sds_request_get_port(sci_req); + + /* + * Fill in the TC with the its required data + * 00h + */ + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = sci_dev->connection_rate; + task_context->protocol_engine_index = + scic_sds_controller_get_protocol_engine_group(scic); + task_context->logical_port_index = scic_sds_port_get_index(sci_port); + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; + task_context->abort = 0; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + /* 04h */ + task_context->remote_node_index = sci_dev->rnc.remote_node_index; + task_context->command_code = 0; + task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; + + /* 08h */ + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 1; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + /* 0ch */ + task_context->address_modifier = 0; + + /* 10h */ + task_context->ssp_command_iu_length = smp_req->req_len; + + /* 14h */ + task_context->transfer_length_bytes = 0; + + /* + * 18h ~ 30h, protocol specific + * since commandIU has been build by framework at this point, we just + * copy the frist DWord from command IU to this location. */ + memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32)); + + /* + * 40h + * "For SMP you could program it to zero. We would prefer that way + * so that done code will be consistent." - Venki + */ + task_context->task_phase = 0; + + if (sci_req->was_tag_assigned_by_user) { + /* + * Build the task context now since we have already read + * the data + */ + sci_req->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group(scic) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(sci_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + scic_sds_io_tag_get_index(sci_req->io_tag)); + } else { + /* + * Build the task context now since we have already read + * the data. + * I/O tag index is not assigned because we have to wait + * until we get a TCi. + */ + sci_req->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group(scic) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(sci_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); + } + + /* + * Copy the physical address for the command buffer to the SCU Task + * Context command buffer should not contain command header. + */ + dma_addr = scic_io_request_get_dma_addr(sci_req, + ((char *) &sci_req->smp.cmd) + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* SMP response comes as UF, so no need to set response IU address. */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + +static enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) +{ + struct smp_req *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); + + if (!smp_req) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + + sci_req->protocol = SCIC_SMP_PROTOCOL; + + /* Construct the SMP SCU Task Context */ + memcpy(smp_req, &sci_req->smp.cmd, sizeof(*smp_req)); + + /* + * Look at the SMP requests' header fields; for certain SAS 1.x SMP + * functions under SAS 2.0, a zero request length really indicates + * a non-zero default length. */ + if (smp_req->req_len == 0) { + switch (smp_req->func) { + case SMP_DISCOVER: + case SMP_REPORT_PHY_ERR_LOG: + case SMP_REPORT_PHY_SATA: + case SMP_REPORT_ROUTE_INFO: + smp_req->req_len = 2; + break; + case SMP_CONF_ROUTE_INFO: + case SMP_PHY_CONTROL: + case SMP_PHY_TEST_FUNCTION: + smp_req->req_len = 9; + break; + /* Default - zero is a valid default for 2.0. */ + } + } + + scu_smp_request_construct_task_context(sci_req, smp_req); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); + + kfree(smp_req); + + return SCI_SUCCESS; +} + +/* * isci_smp_request_build() - This function builds the smp request. * @ireq: This parameter points to the isci_request allocated in the * request construct function. diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index b5c5b06..d090cb1 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -88,7 +88,7 @@ enum sci_request_protocol { SCIC_SMP_PROTOCOL, SCIC_SSP_PROTOCOL, SCIC_STP_PROTOCOL -}; /* XXX remove me, use sas_task.dev instead */; +}; /* XXX remove me, use sas_task.{dev|task_proto} instead */; struct scic_sds_request { /** @@ -310,6 +310,19 @@ enum sci_base_request_states { SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE, /** + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE, + + /** + * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP request is + * waiting for the transmission of the initial frame (i.e. command, task, etc.). + */ + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, + + /** * This state indicates that the request has completed. * This state is entered from the STARTED state. This state is entered from * the ABORTING state. @@ -461,8 +474,6 @@ scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completi } void scic_sds_request_build_sgl(struct scic_sds_request *sci_req); -void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req); -void scic_sds_smp_request_assign_buffers(struct scic_sds_request *sci_req); enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, @@ -473,30 +484,6 @@ enum sci_status scic_sds_task_request_terminate(struct scic_sds_request *sci_req enum sci_status scic_sds_request_started_state_abort_handler(struct scic_sds_request *sci_req); -/** - * enum _scic_sds_smp_request_started_substates - This enumeration depicts all - * of the substates for a SMP request to be performed in the STARTED - * super-state. - * - * - */ -enum scic_sds_smp_request_started_substates { - /** - * This sub-state indicates that the started task management request - * is waiting for the reception of an unsolicited frame - * (i.e. response IU). - */ - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE, - - /** - * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP request is - * waiting for the transmission of the initial frame (i.e. command, task, etc.). - */ - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, -}; - - - /* XXX open code in caller */ static inline void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, dma_addr_t phys_addr) @@ -791,7 +778,6 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_request *sci_req); enum sci_status scic_task_request_construct_ssp(struct scic_sds_request *sci_req); enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req); -enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req); void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); #endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/smp_request.c b/drivers/scsi/isci/smp_request.c deleted file mode 100644 index d4750a7..0000000 --- a/drivers/scsi/isci/smp_request.c +++ /dev/null @@ -1,518 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "state_machine.h" -#include "remote_device.h" -#include "request.h" -#include "scu_completion_codes.h" -#include "scu_task_context.h" -#include "host.h" - -static void scu_smp_request_construct_task_context( - struct scic_sds_request *sci_req, - struct smp_req *smp_req); - -void scic_sds_smp_request_assign_buffers(struct scic_sds_request *sci_req) -{ - if (sci_req->was_tag_assigned_by_user == false) - sci_req->task_context_buffer = &sci_req->tc; -} - -/* - * This function will fill in the SCU Task Context for a SMP request. The - * following important settings are utilized: -# task_type == - * SCU_TASK_TYPE_SMP. This simply indicates that a normal request type - * (i.e. non-raw frame) is being utilized to perform task management. -# - * control_frame == 1. This ensures that the proper endianess is set so - * that the bytes are transmitted in the right order for a smp request frame. - * @sci_req: This parameter specifies the smp request object being - * constructed. - * - */ -static void -scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, - struct smp_req *smp_req) -{ - dma_addr_t dma_addr; - struct scic_sds_controller *scic; - struct scic_sds_remote_device *sci_dev; - struct scic_sds_port *sci_port; - struct scu_task_context *task_context; - ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32); - - /* byte swap the smp request. */ - sci_swab32_cpy(&sci_req->smp.cmd, smp_req, - word_cnt); - - task_context = scic_sds_request_get_task_context(sci_req); - - scic = scic_sds_request_get_controller(sci_req); - sci_dev = scic_sds_request_get_device(sci_req); - sci_port = scic_sds_request_get_port(sci_req); - - /* - * Fill in the TC with the its required data - * 00h - */ - task_context->priority = 0; - task_context->initiator_request = 1; - task_context->connection_rate = sci_dev->connection_rate; - task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(scic); - task_context->logical_port_index = scic_sds_port_get_index(sci_port); - task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; - task_context->abort = 0; - task_context->valid = SCU_TASK_CONTEXT_VALID; - task_context->context_type = SCU_TASK_CONTEXT_TYPE; - - /* 04h */ - task_context->remote_node_index = sci_dev->rnc.remote_node_index; - task_context->command_code = 0; - task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; - - /* 08h */ - task_context->link_layer_control = 0; - task_context->do_not_dma_ssp_good_response = 1; - task_context->strict_ordering = 0; - task_context->control_frame = 1; - task_context->timeout_enable = 0; - task_context->block_guard_enable = 0; - - /* 0ch */ - task_context->address_modifier = 0; - - /* 10h */ - task_context->ssp_command_iu_length = smp_req->req_len; - - /* 14h */ - task_context->transfer_length_bytes = 0; - - /* - * 18h ~ 30h, protocol specific - * since commandIU has been build by framework at this point, we just - * copy the frist DWord from command IU to this location. */ - memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32)); - - /* - * 40h - * "For SMP you could program it to zero. We would prefer that way - * so that done code will be consistent." - Venki - */ - task_context->task_phase = 0; - - if (sci_req->was_tag_assigned_by_user) { - /* - * Build the task context now since we have already read - * the data - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(scic) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(sci_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sci_req->io_tag)); - } else { - /* - * Build the task context now since we have already read - * the data. - * I/O tag index is not assigned because we have to wait - * until we get a TCi. - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(scic) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(sci_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); - } - - /* - * Copy the physical address for the command buffer to the SCU Task - * Context command buffer should not contain command header. - */ - dma_addr = scic_io_request_get_dma_addr(sci_req, - ((char *) &sci_req->smp.cmd) + - sizeof(u32)); - - task_context->command_iu_upper = upper_32_bits(dma_addr); - task_context->command_iu_lower = lower_32_bits(dma_addr); - - /* SMP response comes as UF, so no need to set response IU address. */ - task_context->response_iu_upper = 0; - task_context->response_iu_lower = 0; -} - -/* - * This function processes an unsolicited frame while the SMP request is waiting - * for a response frame. It will copy the response data, release the - * unsolicited frame, and transition the request to the - * SCI_BASE_REQUEST_STATE_COMPLETED state. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This function returns an indication of whether the response frame was handled - * successfully or not. SCI_SUCCESS Currently this value is always returned and - * indicates successful processing of the TC response. - */ -static enum sci_status -scic_sds_smp_request_await_response_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - void *frame_header; - struct smp_resp *rsp_hdr = &sci_req->smp.rsp; - ssize_t word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); - - status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - &frame_header); - - /* byte swap the header. */ - sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); - - if (rsp_hdr->frame_type == SMP_RESPONSE) { - void *smp_resp; - - status = scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - &smp_resp); - - word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / - sizeof(u32); - - sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, - smp_resp, word_cnt); - - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); - } else { - /* This was not a response frame why did it get forwarded? */ - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC SMP Request 0x%p received unexpected frame " - "%d type 0x%02x\n", - __func__, - sci_req, - frame_index, - rsp_hdr->frame_type); - - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_SMP_FRM_TYPE_ERR, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - } - - scic_sds_controller_release_frame(sci_req->owning_controller, - frame_index); - - return SCI_SUCCESS; -} - - -/** - * This method processes an abnormal TC completion while the SMP request is - * waiting for a response frame. It decides what happened to the IO based - * on TC completion status. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - /* - * In the AWAIT RESPONSE state, any TC completion is unexpected. - * but if the TC has success status, we complete the IO anyway. */ - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): - /* - * These status has been seen in a specific LSI expander, which sometimes - * is not able to send smp response within 2 ms. This causes our hardware - * break the connection and set TC completion with one of these SMP_XXX_XX_ERR - * status. For these type of error, we ask scic user to retry the request. */ - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - - -/** - * This method processes the completions transport layer (TL) status to - * determine if the SMP request was sent successfully. If the SMP request - * was sent successfully, then the state for the SMP request transits to - * waiting for a response frame. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - - -static const struct scic_sds_io_request_state_handler scic_sds_smp_request_started_substate_handler_table[] = { - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, - .frame_handler = scic_sds_smp_request_await_response_frame_handler, - }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, - } -}; - -/** - * This method performs the actions required when entering the - * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. This - * includes setting the IO request state handlers for this sub-state. - * @object: This parameter specifies the request object for which the sub-state - * change is occurring. - * - * none. - */ -static void scic_sds_smp_request_started_await_response_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_smp_request_started_substate_handler_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE - ); -} - -/** - * This method performs the actions required when entering the - * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION sub-state. - * This includes setting the SMP request state handlers for this sub-state. - * @object: This parameter specifies the request object for which the sub-state - * change is occurring. - * - * none. - */ -static void scic_sds_smp_request_started_await_tc_completion_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_smp_request_started_substate_handler_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION - ); -} - -static const struct sci_base_state scic_sds_smp_request_started_substate_table[] = { - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .enter_state = scic_sds_smp_request_started_await_response_substate_enter, - }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .enter_state = scic_sds_smp_request_started_await_tc_completion_substate_enter, - }, -}; - -/** - * This method is called by the SCI user to build an SMP IO request. - * - * - The user must have previously called scic_io_request_construct() on the - * supplied IO request. Indicate if the controller successfully built the IO - * request. SCI_SUCCESS This value is returned if the IO request was - * successfully built. SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned - * if the remote_device does not support the SMP protocol. - * SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the user did not - * properly set the association between the SCIC IO request and the user's IO - * request. - */ -enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) -{ - struct smp_req *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); - - if (!smp_req) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - - sci_req->protocol = SCIC_SMP_PROTOCOL; - sci_req->has_started_substate_machine = true; - - /* Construct the started sub-state machine. */ - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - sci_req, - scic_sds_smp_request_started_substate_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE - ); - - /* Construct the SMP SCU Task Context */ - memcpy(smp_req, &sci_req->smp.cmd, sizeof(*smp_req)); - - /* - * Look at the SMP requests' header fields; for certain SAS 1.x SMP - * functions under SAS 2.0, a zero request length really indicates - * a non-zero default length. */ - if (smp_req->req_len == 0) { - switch (smp_req->func) { - case SMP_DISCOVER: - case SMP_REPORT_PHY_ERR_LOG: - case SMP_REPORT_PHY_SATA: - case SMP_REPORT_ROUTE_INFO: - smp_req->req_len = 2; - break; - case SMP_CONF_ROUTE_INFO: - case SMP_PHY_CONTROL: - case SMP_PHY_TEST_FUNCTION: - smp_req->req_len = 9; - break; - /* Default - zero is a valid default for 2.0. */ - } - } - - scu_smp_request_construct_task_context(sci_req, smp_req); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); - - kfree(smp_req); - - return SCI_SUCCESS; -} diff --git a/drivers/scsi/isci/stp_request.c b/drivers/scsi/isci/stp_request.c index 298086a..e94ece8 100644 --- a/drivers/scsi/isci/stp_request.c +++ b/drivers/scsi/isci/stp_request.c @@ -64,12 +64,6 @@ #include "scu_task_context.h" #include "request.h" -void scic_sds_stp_request_assign_buffers(struct scic_sds_request *sci_req) -{ - if (sci_req->was_tag_assigned_by_user == false) - sci_req->task_context_buffer = &sci_req->tc; -} - /** * This method is will fill in the SCU Task Context for any type of SATA * request. This is called from the various SATA constructors. -- cgit v0.10.2 From 5dec6f4e41340196d223caf922578c44dfe2295a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2011 02:28:49 -0700 Subject: isci: merge stp request substates into primary state machine Remove usage of the request substate machine for stp requests, and kill the request substate infrastructure. Similar to the previous conversions this adds the substates to the primary state machine and arranges for the 'started' state to transition to the proper stp substate. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index be2b67d0..86b0c88 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -6,5 +6,4 @@ isci-objs := init.o phy.o request.o sata.o \ remote_node_context.o \ remote_node_table.o \ unsolicited_frame_control.o \ - stp_request.o \ port_config.o \ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 5201dc5..f503e3e 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -58,6 +58,7 @@ #include "request.h" #include "sata.h" #include "scu_completion_codes.h" +#include "scu_event_codes.h" #include "sas.h" /** @@ -92,7 +93,7 @@ static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( * the Scatter-Gather List. * */ -void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) +static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) { struct isci_request *isci_request = sci_req_to_ireq(sds_request); struct isci_host *isci_host = isci_request->isci_host; @@ -366,27 +367,214 @@ static void scu_ssp_task_request_construct_task_context( sizeof(struct ssp_task_iu) / sizeof(u32); } +/** + * This method is will fill in the SCU Task Context for any type of SATA + * request. This is called from the various SATA constructors. + * @sci_req: The general IO request object which is to be used in + * constructing the SCU task context. + * @task_context: The buffer pointer for the SCU task context which is being + * constructed. + * + * The general io request construction is complete. The buffer assignment for + * the command buffer is complete. none Revisit task context construction to + * determine what is common for SSP/SMP/STP task context structures. + */ +static void scu_sata_reqeust_construct_task_context( + struct scic_sds_request *sci_req, + struct scu_task_context *task_context) +{ + dma_addr_t dma_addr; + struct scic_sds_controller *controller; + struct scic_sds_remote_device *target_device; + struct scic_sds_port *target_port; + + controller = scic_sds_request_get_controller(sci_req); + target_device = scic_sds_request_get_device(sci_req); + target_port = scic_sds_request_get_port(sci_req); + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->initiator_request = 1; + task_context->connection_rate = target_device->connection_rate; + task_context->protocol_engine_index = + scic_sds_controller_get_protocol_engine_group(controller); + task_context->logical_port_index = + scic_sds_port_get_index(target_port); + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = + scic_sds_remote_device_get_index(sci_req->target_device); + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + task_context->task_phase = 0x01; + + task_context->ssp_command_iu_length = + (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); + + /* Set the first word of the H2D REG FIS */ + task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd; + + if (sci_req->was_tag_assigned_by_user) { + /* + * Build the task context now since we have already read + * the data + */ + sci_req->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + scic_sds_io_tag_get_index(sci_req->io_tag)); + } else { + /* + * Build the task context now since we have already read + * the data. + * I/O tag index is not assigned because we have to wait + * until we get a TCi. + */ + sci_req->post_context = + (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group( + controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); + } + + /* + * Copy the physical address for the command buffer to the SCU Task + * Context. We must offset the command buffer by 4 bytes because the + * first 4 bytes are transfered in the body of the TC. + */ + dma_addr = scic_io_request_get_dma_addr(sci_req, + ((char *) &sci_req->stp.cmd) + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* SATA Requests do not have a response buffer */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + + /** - * This method constructs the SSP Command IU data for this ssp passthrough - * comand request object. - * @sci_req: This parameter specifies the request object for which the SSP - * command information unit is being built. + * scu_stp_raw_request_construct_task_context - + * @sci_req: This parameter specifies the STP request object for which to + * construct a RAW command frame task context. + * @task_context: This parameter specifies the SCU specific task context buffer + * to construct. * - * enum sci_status, returns invalid parameter is cdb > 16 + * This method performs the operations common to all SATA/STP requests + * utilizing the raw frame method. none */ +static void scu_stp_raw_request_construct_task_context(struct scic_sds_stp_request *stp_req, + struct scu_task_context *task_context) +{ + struct scic_sds_request *sci_req = to_sci_req(stp_req); + + scu_sata_reqeust_construct_task_context(sci_req, task_context); + + task_context->control_frame = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; + task_context->type.stp.fis_type = FIS_REGH2D; + task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); +} + +static enum sci_status +scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, + bool copy_rx_frame) +{ + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; + + scu_stp_raw_request_construct_task_context(stp_req, + sci_req->task_context_buffer); + + pio->current_transfer_bytes = 0; + pio->ending_error = 0; + pio->ending_status = 0; + + pio->request_current.sgl_offset = 0; + pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; + + if (copy_rx_frame) { + scic_sds_request_build_sgl(sci_req); + /* Since the IO request copy of the TC contains the same data as + * the actual TC this pointer is vaild for either. + */ + pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab; + } else { + /* The user does not want the data copied to the SGL buffer location */ + pio->request_current.sgl_pair = NULL; + } + return SCI_SUCCESS; +} /** - * This method constructs the SATA request object. - * @sci_req: - * @sat_protocol: - * @transfer_length: - * @data_direction: - * @copy_rx_frame: * - * enum sci_status + * @sci_req: This parameter specifies the request to be constructed as an + * optimized request. + * @optimized_task_type: This parameter specifies whether the request is to be + * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A + * value of 1 indicates NCQ. + * + * This method will perform request construction common to all types of STP + * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method + * returns an indication as to whether the construction was successful. */ +static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req, + u8 optimized_task_type, + u32 len, + enum dma_data_direction dir) +{ + struct scu_task_context *task_context = sci_req->task_context_buffer; + + /* Build the STP task context structure */ + scu_sata_reqeust_construct_task_context(sci_req, task_context); + + /* Copy over the SGL elements */ + scic_sds_request_build_sgl(sci_req); + + /* Copy over the number of bytes to be transfered */ + task_context->transfer_length_bytes = len; + + if (dir == DMA_TO_DEVICE) { + /* + * The difference between the DMA IN and DMA OUT request task type + * values are consistent with the difference between FPDMA READ + * and FPDMA WRITE values. Add the supplied task type parameter + * to this difference to set the task type properly for this + * DATA OUT (WRITE) case. */ + task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT + - SCU_TASK_TYPE_DMA_IN); + } else { + /* + * For the DATA IN (READ) case, simply save the supplied + * optimized task type. */ + task_context->task_type = optimized_task_type; + } +} + + + static enum sci_status scic_io_request_construct_sata(struct scic_sds_request *sci_req, u32 len, @@ -402,9 +590,11 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, struct isci_tmf *tmf = isci_request_access_tmf(ireq); if (tmf->tmf_code == isci_tmf_sata_srst_high || - tmf->tmf_code == isci_tmf_sata_srst_low) - return scic_sds_stp_soft_reset_request_construct(sci_req); - else { + tmf->tmf_code == isci_tmf_sata_srst_low) { + scu_stp_raw_request_construct_task_context(&sci_req->stp.req, + sci_req->task_context_buffer); + return SCI_SUCCESS; + } else { dev_err(scic_to_dev(sci_req->owning_controller), "%s: Request 0x%p received un-handled SAT " "management protocol 0x%x.\n", @@ -424,17 +614,27 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, } /* non data */ - if (task->data_dir == DMA_NONE) - return scic_sds_stp_non_data_request_construct(sci_req); + if (task->data_dir == DMA_NONE) { + scu_stp_raw_request_construct_task_context(&sci_req->stp.req, + sci_req->task_context_buffer); + return SCI_SUCCESS; + } /* NCQ */ - if (task->ata_task.use_ncq) - return scic_sds_stp_ncq_request_construct(sci_req, len, dir); + if (task->ata_task.use_ncq) { + scic_sds_stp_optimized_request_construct(sci_req, + SCU_TASK_TYPE_FPDMAQ_READ, + len, dir); + return SCI_SUCCESS; + } /* DMA */ - if (task->ata_task.dma_xfer) - return scic_sds_stp_udma_request_construct(sci_req, len, dir); - else /* PIO */ + if (task->ata_task.dma_xfer) { + scic_sds_stp_optimized_request_construct(sci_req, + SCU_TASK_TYPE_DMA_IN, + len, dir); + return SCI_SUCCESS; + } else /* PIO */ return scic_sds_stp_pio_request_construct(sci_req, copy); return status; @@ -453,9 +653,8 @@ static enum sci_status scic_io_request_construct_basic_ssp(struct scic_sds_reque scic_sds_io_request_build_ssp_command_iu(sci_req); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return SCI_SUCCESS; } @@ -470,12 +669,11 @@ enum sci_status scic_task_request_construct_ssp( scic_sds_task_request_build_ssp_task_iu(sci_req); sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return SCI_SUCCESS; } - static enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sci_req) { enum sci_status status; @@ -496,12 +694,11 @@ static enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_requ if (status == SCI_SUCCESS) sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return status; } - enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req) { enum sci_status status = SCI_SUCCESS; @@ -513,7 +710,8 @@ enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_re if (tmf->tmf_code == isci_tmf_sata_srst_high || tmf->tmf_code == isci_tmf_sata_srst_low) { - status = scic_sds_stp_soft_reset_request_construct(sci_req); + scu_stp_raw_request_construct_task_context(&sci_req->stp.req, + sci_req->task_context_buffer); } else { dev_err(scic_to_dev(sci_req->owning_controller), "%s: Request 0x%p received un-handled SAT " @@ -524,10 +722,10 @@ enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_re } } - if (status == SCI_SUCCESS) - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + if (status != SCI_SUCCESS) + return status; + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return status; } @@ -724,7 +922,7 @@ static enum sci_status scic_sds_request_constructed_state_start_handler( /* Everything is good go ahead and change state */ sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_STARTED); + SCI_BASE_REQUEST_STATE_STARTED); return SCI_SUCCESS; } @@ -749,29 +947,14 @@ static enum sci_status scic_sds_request_constructed_state_abort_handler( SCI_FAILURE_IO_TERMINATED); sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } -/* - * ***************************************************************************** - * * STARTED STATE HANDLERS - * ***************************************************************************** */ - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_terminate() request. Since the request - * has been posted to the hardware the io request state is changed to the - * aborting state. enum sci_status SCI_SUCCESS - */ -enum sci_status scic_sds_request_started_state_abort_handler( - struct scic_sds_request *request) +static enum sci_status scic_sds_request_started_state_abort_handler(struct scic_sds_request *sci_req) { - if (request->has_started_substate_machine) - sci_base_state_machine_stop(&request->started_substate_machine); - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_ABORTING); return SCI_SUCCESS; } @@ -943,19 +1126,15 @@ scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sc */ /* In all cases we will treat this as the completion of the IO req. */ - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } enum sci_status scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code) { - if (request->state_machine.current_state_id == SCI_BASE_REQUEST_STATE_STARTED && - request->has_started_substate_machine == false) - return scic_sds_request_started_state_tc_completion_handler(request, completion_code); - else if (request->state_handlers->tc_completion_handler) + if (request->state_handlers->tc_completion_handler) return request->state_handlers->tc_completion_handler(request, completion_code); dev_warn(scic_to_dev(request->owning_controller), @@ -1064,7 +1243,7 @@ static enum sci_status scic_sds_request_completed_state_complete_handler( } sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_FINAL); + SCI_BASE_REQUEST_STATE_FINAL); return SCI_SUCCESS; } @@ -1084,7 +1263,7 @@ static enum sci_status scic_sds_request_aborting_state_abort_handler( struct scic_sds_request *request) { sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } @@ -1107,7 +1286,7 @@ static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( ); sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + SCI_BASE_REQUEST_STATE_COMPLETED); break; default: @@ -1161,7 +1340,7 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi SCI_SUCCESS); sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): @@ -1178,7 +1357,7 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi completion_code); sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); + SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); break; default: @@ -1192,7 +1371,7 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi ); sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -1215,9 +1394,9 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler struct scic_sds_request *request) { sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); + SCI_BASE_REQUEST_STATE_ABORTING); sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + SCI_BASE_REQUEST_STATE_COMPLETED); return SCI_SUCCESS; } @@ -1243,7 +1422,7 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler scic_sds_io_request_copy_response(request); sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + SCI_BASE_REQUEST_STATE_COMPLETED); scic_sds_controller_release_frame(request->owning_controller, frame_index); return SCI_SUCCESS; @@ -1270,13 +1449,11 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler /* * In the AWAIT RESPONSE state, any TC completion is unexpected. * but if the TC has success status, we complete the IO anyway. */ - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + SCI_SUCCESS); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): @@ -1288,13 +1465,11 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler * is not able to send smp response within 2 ms. This causes our hardware * break the connection and set TC completion with one of these SMP_XXX_XX_ERR * status. For these type of error, we ask scic user to retry the request. */ - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED - ); + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, + SCI_FAILURE_RETRY_REQUIRED); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; default: @@ -1307,9 +1482,8 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -1365,7 +1539,7 @@ scic_sds_smp_request_await_response_frame_handler(struct scic_sds_request *sci_r sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); } else { /* This was not a response frame why did it get forwarded? */ dev_err(scic_to_dev(sci_req->owning_controller), @@ -1378,46 +1552,921 @@ scic_sds_smp_request_await_response_frame_handler(struct scic_sds_request *sci_r scic_sds_request_set_status( sci_req, - SCU_TASK_DONE_SMP_FRM_TYPE_ERR, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + SCU_TASK_DONE_SMP_FRM_TYPE_ERR, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + } + + scic_sds_controller_release_frame(sci_req->owning_controller, + frame_index); + + return SCI_SUCCESS; +} + +/** + * This method processes the completions transport layer (TL) status to + * determine if the SMP request was sent successfully. If the SMP request + * was sent successfully, then the state for the SMP request transits to + * waiting for a response frame. + * @sci_req: This parameter specifies the request for which the TC + * completion was received. + * @completion_code: This parameter indicates the completion status information + * for the TC. + * + * Indicate if the tc completion handler was successful. SCI_SUCCESS currently + * this method always returns success. + */ +static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + SCI_SUCCESS); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *req, + u16 ncq_tag) +{ + /** + * @note This could be made to return an error to the user if the user + * attempts to set the NCQ tag in the wrong state. + */ + req->task_context_buffer->type.stp.ncq_tag = ncq_tag; +} + +/** + * + * @sci_req: + * + * Get the next SGL element from the request. - Check on which SGL element pair + * we are working - if working on SLG pair element A - advance to element B - + * else - check to see if there are more SGL element pairs for this IO request + * - if there are more SGL element pairs - advance to the next pair and return + * element A struct scu_sgl_element* + */ +static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) +{ + struct scu_sgl_element *current_sgl; + struct scic_sds_request *sci_req = to_sci_req(stp_req); + struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; + + if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + if (pio_sgl->sgl_pair->B.address_lower == 0 && + pio_sgl->sgl_pair->B.address_upper == 0) { + current_sgl = NULL; + } else { + pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B; + current_sgl = &pio_sgl->sgl_pair->B; + } + } else { + if (pio_sgl->sgl_pair->next_pair_lower == 0 && + pio_sgl->sgl_pair->next_pair_upper == 0) { + current_sgl = NULL; + } else { + u64 phys_addr; + + phys_addr = pio_sgl->sgl_pair->next_pair_upper; + phys_addr <<= 32; + phys_addr |= pio_sgl->sgl_pair->next_pair_lower; + + pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr); + pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A; + current_sgl = &pio_sgl->sgl_pair->A; + } + } + + return current_sgl; +} + +/** + * + * @sci_req: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. + */ +static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +/** + * + * @request: This parameter specifies the request for which a frame has been + * received. + * @frame_index: This parameter specifies the index of the frame that has been + * received. + * + * This method processes frames received from the target while waiting for a + * device to host register FIS. If a non-register FIS is received during this + * time, it is treated as a protocol violation from an IO perspective. Indicate + * if the received frame was processed successfully. + */ +static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(sci_req->owning_controller), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION); + break; + } + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + +#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ + +/* transmit DATA_FIS from (current sgl + offset) for input + * parameter length. current sgl and offset is alreay stored in the IO request + */ +static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( + struct scic_sds_request *sci_req, + u32 length) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scu_task_context *task_context; + struct scu_sgl_element *current_sgl; + + /* Recycle the TC and reconstruct it for sending out DATA FIS containing + * for the data from current_sgl+offset for the input length + */ + task_context = scic_sds_controller_get_task_context_buffer(scic, + sci_req->io_tag); + + if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) + current_sgl = &stp_req->type.pio.request_current.sgl_pair->A; + else + current_sgl = &stp_req->type.pio.request_current.sgl_pair->B; + + /* update the TC */ + task_context->command_iu_upper = current_sgl->address_upper; + task_context->command_iu_lower = current_sgl->address_lower; + task_context->transfer_length_bytes = length; + task_context->type.stp.fis_type = FIS_DATA; + + /* send the new TC out. */ + return scic_controller_continue_io(sci_req); +} + +static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req) +{ + + struct scu_sgl_element *current_sgl; + u32 sgl_offset; + u32 remaining_bytes_in_current_sgl = 0; + enum sci_status status = SCI_SUCCESS; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + + sgl_offset = stp_req->type.pio.request_current.sgl_offset; + + if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); + remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset; + } else { + current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); + remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset; + } + + + if (stp_req->type.pio.pio_transfer_bytes > 0) { + if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { + /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ + status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl); + if (status == SCI_SUCCESS) { + stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; + + /* update the current sgl, sgl_offset and save for future */ + current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req); + sgl_offset = 0; + } + } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { + /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */ + scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes); + + if (status == SCI_SUCCESS) { + /* Sgl offset will be adjusted and saved for future */ + sgl_offset += stp_req->type.pio.pio_transfer_bytes; + current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes; + stp_req->type.pio.pio_transfer_bytes = 0; + } + } + } + + if (status == SCI_SUCCESS) { + stp_req->type.pio.request_current.sgl_offset = sgl_offset; + } + + return status; +} + +/** + * + * @stp_request: The request that is used for the SGL processing. + * @data_buffer: The buffer of data to be copied. + * @length: The length of the data transfer. + * + * Copy the data from the buffer for the length specified to the IO reqeust SGL + * specified data region. enum sci_status + */ +static enum sci_status +scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req, + u8 *data_buf, u32 len) +{ + struct scic_sds_request *sci_req; + struct isci_request *ireq; + u8 *src_addr; + int copy_len; + struct sas_task *task; + struct scatterlist *sg; + void *kaddr; + int total_len = len; + + sci_req = to_sci_req(stp_req); + ireq = sci_req_to_ireq(sci_req); + task = isci_request_access_task(ireq); + src_addr = data_buf; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (total_len > 0) { + struct page *page = sg_page(sg); + + copy_len = min_t(int, total_len, sg_dma_len(sg)); + kaddr = kmap_atomic(page, KM_IRQ0); + memcpy(kaddr + sg->offset, src_addr, copy_len); + kunmap_atomic(kaddr, KM_IRQ0); + total_len -= copy_len; + src_addr += copy_len; + sg = sg_next(sg); + } + } else { + BUG_ON(task->total_xfer_len < total_len); + memcpy(task->scatter, src_addr, total_len); + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: The PIO DATA IN request that is to receive the data. + * @data_buffer: The buffer to copy from. + * + * Copy the data buffer to the io request data region. enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( + struct scic_sds_stp_request *sci_req, + u8 *data_buffer) +{ + enum sci_status status; + + /* + * If there is less than 1K remaining in the transfer request + * copy just the data for the transfer */ + if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { + status = scic_sds_stp_request_pio_data_in_copy_data_buffer( + sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes); + + if (status == SCI_SUCCESS) + sci_req->type.pio.pio_transfer_bytes = 0; + } else { + /* We are transfering the whole frame so copy */ + status = scic_sds_stp_request_pio_data_in_copy_data_buffer( + sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); + + if (status == SCI_SUCCESS) + sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; + } + + return status; +} + +/** + * + * @sci_req: + * @completion_code: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return status; +} + +static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct isci_request *ireq = sci_req_to_ireq(sci_req); + struct sas_task *task = isci_request_access_task(ireq); + struct dev_to_host_fis *frame_header; + enum sci_status status; + u32 *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_PIO_SETUP: + /* Get from the frame buffer the PIO Setup Data */ + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + /* Get the data from the PIO Setup The SCU Hardware returns + * first word in the frame_header and the rest of the data is in + * the frame buffer so we need to back up one dword + */ + + /* transfer_count: first 16bits in the 4th dword */ + stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; + + /* ending_status: 4th byte in the 3rd dword */ + stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + sci_req->stp.rsp.status = stp_req->type.pio.ending_status; + + /* The next state is dependent on whether the + * request was PIO Data-in or Data out + */ + if (task->data_dir == DMA_FROM_DEVICE) { + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); + } else if (task->data_dir == DMA_TO_DEVICE) { + /* Transmit data */ + status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); + if (status != SCI_SUCCESS) + break; + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); + } + break; + case FIS_SETDEVBITS: + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + break; + case FIS_REGD2H: + if (frame_header->status & ATA_BUSY) { + /* Now why is the drive sending a D2H Register FIS when + * it is still busy? Do nothing since we are still in + * the right state. + */ + dev_dbg(scic_to_dev(scic), + "%s: SCIC PIO Request 0x%p received " + "D2H Register FIS with BSY status " + "0x%x\n", __func__, stp_req, + frame_header->status); + break; + } + + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.req, + frame_header, + frame_buffer); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + default: + /* FIXME: what do we do here? */ + break; + } + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + +static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + struct dev_to_host_fis *frame_header; + struct sata_fis_data *frame_buffer; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + if (frame_header->fis_type == FIS_DATA) { + if (stp_req->type.pio.request_current.sgl_pair == NULL) { + sci_req->saved_rx_frame_index = frame_index; + stp_req->type.pio.pio_transfer_bytes = 0; + } else { + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, + (u8 *)frame_buffer); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + } + + /* Check for the end of the transfer, are there more + * bytes remaining for this data transfer + */ + if (status != SCI_SUCCESS || + stp_req->type.pio.pio_transfer_bytes != 0) + return status; + + if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + } else { + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + } + } else { + dev_err(scic_to_dev(scic), + "%s: SCIC PIO Request 0x%p received frame %d " + "with fis type 0x%02x when expecting a data " + "fis.\n", __func__, stp_req, frame_index, + frame_header->fis_type); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + } + + return status; +} + + +/** + * + * @sci_req: + * @completion_code: + * + * enum sci_status + */ +static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( + + struct scic_sds_request *sci_req, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + bool all_frames_transferred = false; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* Transmit data */ + if (stp_req->type.pio.pio_transfer_bytes != 0) { + status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); + if (status == SCI_SUCCESS) { + if (stp_req->type.pio.pio_transfer_bytes == 0) + all_frames_transferred = true; + } + } else if (stp_req->type.pio.pio_transfer_bytes == 0) { + /* + * this will happen if the all data is written at the + * first time after the pio setup fis is received + */ + all_frames_transferred = true; + } + + /* all data transferred. */ + if (all_frames_transferred) { + /* + * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE + * and wait for PIO_SETUP fis / or D2H REg fis. */ + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + } + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); + break; + } + + return status; +} + +/** + * + * @request: This is the request which is receiving the event. + * @event_code: This is the event code that the request on which the request is + * expected to take action. + * + * This method will handle any link layer events while waiting for the data + * frame. enum sci_status SCI_SUCCESS SCI_FAILURE + */ +static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler( + struct scic_sds_request *request, + u32 event_code) +{ + enum sci_status status; + + switch (scu_get_event_specifier(event_code)) { + case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: + /* + * We are waiting for data and the SCU has R_ERR the data frame. + * Go back to waiting for the D2H Register FIS */ + sci_base_state_machine_change_state( + &request->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + + status = SCI_SUCCESS; + break; + + default: + dev_err(scic_to_dev(request->owning_controller), + "%s: SCIC PIO Request 0x%p received unexpected " + "event 0x%08x\n", + __func__, request, event_code); + + /* / @todo Should we fail the PIO request when we get an unexpected event? */ + status = SCI_FAILURE; + break; + } + + return status; +} + +static void scic_sds_stp_request_udma_complete_request( + struct scic_sds_request *request, + u32 scu_status, + enum sci_status sci_status) +{ + scic_sds_request_set_status(request, scu_status, sci_status); + sci_base_state_machine_change_state(&request->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); +} + +static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + struct dev_to_host_fis *frame_header; + enum sci_status status; + u32 *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if ((status == SCI_SUCCESS) && + (frame_header->fis_type == FIS_REGD2H)) { + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + } + + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + +static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + /* + * We must check ther response buffer to see if the D2H Register FIS was + * received before we got the TC completion. */ + if (sci_req->stp.rsp.fis_type == FIS_REGD2H) { + scic_sds_remote_device_suspend(sci_req->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); + + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + } else { + /* + * If we have an error completion status for the TC then we can expect a + * D2H register FIS from the device so we must change state to wait for it */ + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE); + } + break; + + /* + * / @todo Check to see if any of these completion status need to wait for + * / the device to host register fis. */ + /* / @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0 */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): + scic_sds_remote_device_suspend(sci_req->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); + /* Fall through to the default case */ + default: + /* All other completion status cause the IO to be complete. */ + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + break; + } + + return status; +} + +static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + + /* Use the general frame handler to copy the resposne data */ + status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); + + if (status != SCI_SUCCESS) + return status; + + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + return status; +} + +enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, + u32 len, + enum dma_data_direction dir) +{ + return SCI_SUCCESS; +} + +/** + * + * @sci_req: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. + */ +static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler( + struct scic_sds_request *sci_req, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + scic_sds_request_set_status( + sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE + ); + break; + + default: + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); + break; } - scic_sds_controller_release_frame(sci_req->owning_controller, - frame_index); - return SCI_SUCCESS; } /** - * This method processes the completions transport layer (TL) status to - * determine if the SMP request was sent successfully. If the SMP request - * was sent successfully, then the state for the SMP request transits to - * waiting for a response frame. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. + * @sci_req: + * @completion_code: + * + * This method processes a TC completion. The expected TC completion is for + * the transmission of the H2D register FIS containing the SATA/STP non-data + * request. This method always successfully processes the TC completion. + * SCI_SUCCESS This value is always returned. */ -static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( +static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler( struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + SCI_SUCCESS); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE); break; default: @@ -1430,15 +2479,83 @@ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_ha SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR ); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } return SCI_SUCCESS; } +/** + * + * @request: This parameter specifies the request for which a frame has been + * received. + * @frame_index: This parameter specifies the index of the frame that has been + * received. + * + * This method processes frames received from the target while waiting for a + * device to host register FIS. If a non-register FIS is received during this + * time, it is treated as a protocol violation from an IO perspective. Indicate + * if the received frame was processed successfully. + */ +static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( + struct scic_sds_request *sci_req, + u32 frame_index) +{ + enum sci_status status; + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = sci_req->owning_controller; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION); + break; + } + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; +} + static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { }, [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { @@ -1467,6 +2584,52 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, + .frame_handler = scic_sds_stp_request_udma_general_frame_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, + .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { + .abort_handler = scic_sds_request_started_state_abort_handler, + .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, + }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .complete_handler = scic_sds_request_completed_state_complete_handler, }, @@ -2210,15 +3373,6 @@ static void scic_sds_request_constructed_state_enter(void *object) ); } -/** - * scic_sds_request_started_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This is cast into a SCIC_SDS_IO_REQUEST object. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_STARTED state. If the io request object type is a - * SCSI Task request we must enter the started substate machine. none - */ static void scic_sds_request_started_state_enter(void *object) { struct scic_sds_request *sci_req = object; @@ -2238,40 +3392,36 @@ static void scic_sds_request_started_state_enter(void *object) SCI_BASE_REQUEST_STATE_STARTED ); - /* Most of the request state machines have a started substate machine so - * start its execution on the entry to the started state. + /* all unaccelerated request types (non ssp or ncq) handled with + * substates */ - if (sci_req->has_started_substate_machine == true) - sci_base_state_machine_start(&sci_req->started_substate_machine); - if (!task && dev->dev_type == SAS_END_DEV) { sci_base_state_machine_change_state(sm, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION); + } else if (!task && + (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high || + isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) { + sci_base_state_machine_change_state(sm, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); } else if (task && task->task_proto == SAS_PROTOCOL_SMP) { sci_base_state_machine_change_state(sm, SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE); + } else if (task && sas_protocol_ata(task->task_proto) && + !task->ata_task.use_ncq) { + u32 state; + + if (task->data_dir == DMA_NONE) + state = SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE; + else if (task->ata_task.dma_xfer) + state = SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE; + else /* PIO */ + state = SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE; + + sci_base_state_machine_change_state(sm, state); } } /** - * scic_sds_request_started_state_exit() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST - * object. - * - * This method implements the actions taken when exiting the - * SCI_BASE_REQUEST_STATE_STARTED state. For task requests the action will be - * to stop the started substate machine. none - */ -static void scic_sds_request_started_state_exit(void *object) -{ - struct scic_sds_request *sci_req = object; - - if (sci_req->has_started_substate_machine == true) - sci_base_state_machine_stop(&sci_req->started_substate_machine); -} - -/** * scic_sds_request_completed_state_enter() - * @object: This parameter specifies the base object for which the state * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST @@ -2392,6 +3542,175 @@ static void scic_sds_smp_request_started_await_tc_completion_substate_enter(void ); } +static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + sci_req->target_device, sci_req + ); +} + +static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE + ); +} + + + +static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + sci_req->target_device, sci_req); +} + +static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); +} + +static void scic_sds_stp_request_started_pio_data_in_await_data_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE + ); +} + +static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE + ); +} + + + +static void scic_sds_stp_request_started_udma_await_tc_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE + ); +} + +/** + * + * + * This state is entered when there is an TC completion failure. The hardware + * received an unexpected condition while processing the IO request and now + * will UF the D2H register FIS to complete the IO. + */ +static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE + ); +} + + + +static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE + ); + + scic_sds_remote_device_set_working_request( + sci_req->target_device, sci_req + ); +} + +static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + struct scu_task_context *task_context; + struct host_to_dev_fis *h2d_fis; + enum sci_status status; + + /* Clear the SRST bit */ + h2d_fis = &sci_req->stp.cmd; + h2d_fis->control = 0; + + /* Clear the TC control bit */ + task_context = scic_sds_controller_get_task_context_buffer( + sci_req->owning_controller, sci_req->io_tag); + task_context->control_frame = 0; + + status = scic_controller_continue_io(sci_req); + if (status == SCI_SUCCESS) { + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE + ); + } +} + +static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( + void *object) +{ + struct scic_sds_request *sci_req = object; + + SET_STATE_HANDLER( + sci_req, + scic_sds_request_state_handler_table, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE + ); +} + static const struct sci_base_state scic_sds_request_state_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = { .enter_state = scic_sds_request_initial_state_enter, @@ -2401,7 +3720,39 @@ static const struct sci_base_state scic_sds_request_state_table[] = { }, [SCI_BASE_REQUEST_STATE_STARTED] = { .enter_state = scic_sds_request_started_state_enter, - .exit_state = scic_sds_request_started_state_exit + }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_non_data_await_d2h_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_await_frame_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_data_in_await_data_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_pio_data_out_transmit_data_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, + }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { + .enter_state = scic_sds_stp_request_started_soft_reset_await_d2h_response_enter, }, [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { .enter_state = scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter, @@ -2437,7 +3788,6 @@ static void scic_sds_general_request_construct(struct scic_sds_controller *scic, sci_req->io_tag = io_tag; sci_req->owning_controller = scic; sci_req->target_device = sci_dev; - sci_req->has_started_substate_machine = false; sci_req->protocol = SCIC_NO_PROTOCOL; sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; sci_req->device_sequence = scic_sds_remote_device_get_sequence(sci_dev); @@ -3065,6 +4415,3 @@ int isci_request_execute( *isci_request = request; return ret; } - - - diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index d090cb1..95b6589 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -59,7 +59,6 @@ #include "isci.h" #include "host.h" #include "scu_task_context.h" -#include "stp_request.h" /** * struct isci_request_status - This enum defines the possible states of an I/O @@ -90,6 +89,63 @@ enum sci_request_protocol { SCIC_STP_PROTOCOL }; /* XXX remove me, use sas_task.{dev|task_proto} instead */; +struct scic_sds_stp_request { + union { + u32 ncq; + + u32 udma; + + struct scic_sds_stp_pio_request { + /** + * Total transfer for the entire PIO request recorded at request constuction + * time. + * + * @todo Should we just decrement this value for each byte of data transitted + * or received to elemenate the current_transfer_bytes field? + */ + u32 total_transfer_bytes; + + /** + * Total number of bytes received/transmitted in data frames since the start + * of the IO request. At the end of the IO request this should equal the + * total_transfer_bytes. + */ + u32 current_transfer_bytes; + + /** + * The number of bytes requested in the in the PIO setup. + */ + u32 pio_transfer_bytes; + + /** + * PIO Setup ending status value to tell us if we need to wait for another FIS + * or if the transfer is complete. On the receipt of a D2H FIS this will be + * the status field of that FIS. + */ + u8 ending_status; + + /** + * On receipt of a D2H FIS this will be the ending error field if the + * ending_status has the SATA_STATUS_ERR bit set. + */ + u8 ending_error; + + struct scic_sds_request_pio_sgl { + struct scu_sgl_element_pair *sgl_pair; + u8 sgl_set; + u32 sgl_offset; + } request_current; + } pio; + + struct { + /** + * The number of bytes requested in the PIO setup before CDB data frame. + */ + u32 device_preferred_cdb_length; + } packet; + } type; +}; + struct scic_sds_request { /** * This field contains the information for the base request state machine. @@ -159,12 +215,6 @@ struct scic_sds_request { bool is_task_management_request; /** - * This field indicates that this request contains an initialized started - * substate machine. - */ - bool has_started_substate_machine; - - /** * This field is a pointer to the stored rx frame data. It is used in STP * internal requests and SMP response frames. If this field is non-NULL the * saved frame must be released on IO request completion. @@ -174,12 +224,6 @@ struct scic_sds_request { u32 saved_rx_frame_index; /** - * This field specifies the data necessary to manage the sub-state - * machine executed while in the SCI_BASE_REQUEST_STATE_STARTED state. - */ - struct sci_base_state_machine started_substate_machine; - - /** * This field specifies the current state handlers in place for this * IO Request object. This field is updated each time the request * changes state. @@ -295,6 +339,41 @@ enum sci_base_request_states { */ SCI_BASE_REQUEST_STATE_STARTED, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE, + + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE, + + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE, + + /** + * While in this state the IO request object is waiting for the TC completion + * notification for the H2D Register FIS + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE, + + /** + * While in this state the IO request object is waiting for either a PIO Setup + * FIS or a D2H register FIS. The type of frame received is based on the + * result of the prior frame and line conditions. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE, + + /** + * While in this state the IO request object is waiting for a DATA frame from + * the device. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE, + + /** + * While in this state the IO request object is waiting to transmit the next data + * frame to the device. + */ + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE, + /** * The AWAIT_TC_COMPLETION sub-state indicates that the started raw * task management request is waiting for the transmission of the @@ -383,8 +462,6 @@ struct scic_sds_io_request_state_handler { }; -extern const struct sci_base_state scic_sds_io_request_started_task_mgmt_substate_table[]; - /** * scic_sds_request_get_controller() - * @@ -473,7 +550,6 @@ scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completi (scu_sge).address_modifier = 0; \ } -void scic_sds_request_build_sgl(struct scic_sds_request *sci_req); enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, @@ -481,8 +557,6 @@ enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_r enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, u32 frame_index); enum sci_status scic_sds_task_request_terminate(struct scic_sds_request *sci_req); -enum sci_status scic_sds_request_started_state_abort_handler(struct scic_sds_request *sci_req); - /* XXX open code in caller */ static inline void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, @@ -778,6 +852,9 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_request *sci_req); enum sci_status scic_task_request_construct_ssp(struct scic_sds_request *sci_req); enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req); +enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, + u32 transfer_length, + enum dma_data_direction dir); void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); #endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/stp_request.c b/drivers/scsi/isci/stp_request.c deleted file mode 100644 index e94ece8..0000000 --- a/drivers/scsi/isci/stp_request.c +++ /dev/null @@ -1,1584 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "sas.h" -#include "state_machine.h" -#include "remote_device.h" -#include "stp_request.h" -#include "unsolicited_frame_control.h" -#include "scu_completion_codes.h" -#include "scu_event_codes.h" -#include "scu_task_context.h" -#include "request.h" - -/** - * This method is will fill in the SCU Task Context for any type of SATA - * request. This is called from the various SATA constructors. - * @sci_req: The general IO request object which is to be used in - * constructing the SCU task context. - * @task_context: The buffer pointer for the SCU task context which is being - * constructed. - * - * The general io request construction is complete. The buffer assignment for - * the command buffer is complete. none Revisit task context construction to - * determine what is common for SSP/SMP/STP task context structures. - */ -static void scu_sata_reqeust_construct_task_context( - struct scic_sds_request *sci_req, - struct scu_task_context *task_context) -{ - dma_addr_t dma_addr; - struct scic_sds_controller *controller; - struct scic_sds_remote_device *target_device; - struct scic_sds_port *target_port; - - controller = scic_sds_request_get_controller(sci_req); - target_device = scic_sds_request_get_device(sci_req); - target_port = scic_sds_request_get_port(sci_req); - - /* Fill in the TC with the its required data */ - task_context->abort = 0; - task_context->priority = SCU_TASK_PRIORITY_NORMAL; - task_context->initiator_request = 1; - task_context->connection_rate = target_device->connection_rate; - task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(controller); - task_context->logical_port_index = - scic_sds_port_get_index(target_port); - task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; - task_context->valid = SCU_TASK_CONTEXT_VALID; - task_context->context_type = SCU_TASK_CONTEXT_TYPE; - - task_context->remote_node_index = - scic_sds_remote_device_get_index(sci_req->target_device); - task_context->command_code = 0; - - task_context->link_layer_control = 0; - task_context->do_not_dma_ssp_good_response = 1; - task_context->strict_ordering = 0; - task_context->control_frame = 0; - task_context->timeout_enable = 0; - task_context->block_guard_enable = 0; - - task_context->address_modifier = 0; - task_context->task_phase = 0x01; - - task_context->ssp_command_iu_length = - (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); - - /* Set the first word of the H2D REG FIS */ - task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd; - - if (sci_req->was_tag_assigned_by_user) { - /* - * Build the task context now since we have already read - * the data - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sci_req->io_tag)); - } else { - /* - * Build the task context now since we have already read - * the data. - * I/O tag index is not assigned because we have to wait - * until we get a TCi. - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); - } - - /* - * Copy the physical address for the command buffer to the SCU Task - * Context. We must offset the command buffer by 4 bytes because the - * first 4 bytes are transfered in the body of the TC. - */ - dma_addr = scic_io_request_get_dma_addr(sci_req, - ((char *) &sci_req->stp.cmd) + - sizeof(u32)); - - task_context->command_iu_upper = upper_32_bits(dma_addr); - task_context->command_iu_lower = lower_32_bits(dma_addr); - - /* SATA Requests do not have a response buffer */ - task_context->response_iu_upper = 0; - task_context->response_iu_lower = 0; -} - -/** - * - * @sci_req: - * - * This method will perform any general sata request construction. What part of - * SATA IO request construction is general? none - */ -static void scic_sds_stp_non_ncq_request_construct( - struct scic_sds_request *sci_req) -{ - sci_req->has_started_substate_machine = true; -} - -/** - * - * @sci_req: This parameter specifies the request to be constructed as an - * optimized request. - * @optimized_task_type: This parameter specifies whether the request is to be - * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A - * value of 1 indicates NCQ. - * - * This method will perform request construction common to all types of STP - * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method - * returns an indication as to whether the construction was successful. - */ -static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req, - u8 optimized_task_type, - u32 len, - enum dma_data_direction dir) -{ - struct scu_task_context *task_context = sci_req->task_context_buffer; - - /* Build the STP task context structure */ - scu_sata_reqeust_construct_task_context(sci_req, task_context); - - /* Copy over the SGL elements */ - scic_sds_request_build_sgl(sci_req); - - /* Copy over the number of bytes to be transfered */ - task_context->transfer_length_bytes = len; - - if (dir == DMA_TO_DEVICE) { - /* - * The difference between the DMA IN and DMA OUT request task type - * values are consistent with the difference between FPDMA READ - * and FPDMA WRITE values. Add the supplied task type parameter - * to this difference to set the task type properly for this - * DATA OUT (WRITE) case. */ - task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT - - SCU_TASK_TYPE_DMA_IN); - } else { - /* - * For the DATA IN (READ) case, simply save the supplied - * optimized task type. */ - task_context->task_type = optimized_task_type; - } -} - -/** - * - * @sci_req: This parameter specifies the request to be constructed. - * - * This method will construct the STP UDMA request and its associated TC data. - * This method returns an indication as to whether the construction was - * successful. SCI_SUCCESS Currently this method always returns this value. - */ -enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req, - u32 len, - enum dma_data_direction dir) -{ - scic_sds_stp_optimized_request_construct(sci_req, - SCU_TASK_TYPE_FPDMAQ_READ, - len, dir); - return SCI_SUCCESS; -} - -/** - * scu_stp_raw_request_construct_task_context - - * @sci_req: This parameter specifies the STP request object for which to - * construct a RAW command frame task context. - * @task_context: This parameter specifies the SCU specific task context buffer - * to construct. - * - * This method performs the operations common to all SATA/STP requests - * utilizing the raw frame method. none - */ -static void scu_stp_raw_request_construct_task_context( - struct scic_sds_stp_request *stp_req, - struct scu_task_context *task_context) -{ - struct scic_sds_request *sci_req = to_sci_req(stp_req); - - scu_sata_reqeust_construct_task_context(sci_req, task_context); - - task_context->control_frame = 0; - task_context->priority = SCU_TASK_PRIORITY_NORMAL; - task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; - task_context->type.stp.fis_type = FIS_REGH2D; - task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); -} - -void scic_stp_io_request_set_ncq_tag( - struct scic_sds_request *req, - u16 ncq_tag) -{ - /** - * @note This could be made to return an error to the user if the user - * attempts to set the NCQ tag in the wrong state. - */ - req->task_context_buffer->type.stp.ncq_tag = ncq_tag; -} - -/** - * - * @sci_req: - * - * Get the next SGL element from the request. - Check on which SGL element pair - * we are working - if working on SLG pair element A - advance to element B - - * else - check to see if there are more SGL element pairs for this IO request - * - if there are more SGL element pairs - advance to the next pair and return - * element A struct scu_sgl_element* - */ -static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) -{ - struct scu_sgl_element *current_sgl; - struct scic_sds_request *sci_req = to_sci_req(stp_req); - struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; - - if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - if (pio_sgl->sgl_pair->B.address_lower == 0 && - pio_sgl->sgl_pair->B.address_upper == 0) { - current_sgl = NULL; - } else { - pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B; - current_sgl = &pio_sgl->sgl_pair->B; - } - } else { - if (pio_sgl->sgl_pair->next_pair_lower == 0 && - pio_sgl->sgl_pair->next_pair_upper == 0) { - current_sgl = NULL; - } else { - u64 phys_addr; - - phys_addr = pio_sgl->sgl_pair->next_pair_upper; - phys_addr <<= 32; - phys_addr |= pio_sgl->sgl_pair->next_pair_lower; - - pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr); - pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A; - current_sgl = &pio_sgl->sgl_pair->A; - } - } - - return current_sgl; -} - -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -/** - * - * @request: This parameter specifies the request for which a frame has been - * received. - * @frame_index: This parameter specifies the index of the frame that has been - * received. - * - * This method processes frames received from the target while waiting for a - * device to host register FIS. If a non-register FIS is received during this - * time, it is treated as a protocol violation from an IO perspective. Indicate - * if the received frame was processed successfully. - */ -static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - - return status; - } - - switch (frame_header->fis_type) { - case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - /* The command has completed with error */ - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", __func__, stp_req, - frame_index); - - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); - break; - } - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_non_data_substate_handler_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, - } -}; - -static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_non_data_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req - ); -} - -static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_non_data_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_stp_request_started_non_data_substate_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_non_data_await_d2h_enter, - }, -}; - -enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req) -{ - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - scic_sds_stp_non_ncq_request_construct(sci_req); - - /* Build the STP task context structure */ - scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); - - sci_base_state_machine_construct(&sci_req->started_substate_machine, - sci_req, - scic_sds_stp_request_started_non_data_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE); - - return SCI_SUCCESS; -} - -#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ - -/* transmit DATA_FIS from (current sgl + offset) for input - * parameter length. current sgl and offset is alreay stored in the IO request - */ -static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( - struct scic_sds_request *sci_req, - u32 length) -{ - struct scic_sds_controller *scic = sci_req->owning_controller; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scu_task_context *task_context; - struct scu_sgl_element *current_sgl; - - /* Recycle the TC and reconstruct it for sending out DATA FIS containing - * for the data from current_sgl+offset for the input length - */ - task_context = scic_sds_controller_get_task_context_buffer(scic, - sci_req->io_tag); - - if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) - current_sgl = &stp_req->type.pio.request_current.sgl_pair->A; - else - current_sgl = &stp_req->type.pio.request_current.sgl_pair->B; - - /* update the TC */ - task_context->command_iu_upper = current_sgl->address_upper; - task_context->command_iu_lower = current_sgl->address_lower; - task_context->transfer_length_bytes = length; - task_context->type.stp.fis_type = FIS_DATA; - - /* send the new TC out. */ - return scic_controller_continue_io(sci_req); -} - -static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req) -{ - - struct scu_sgl_element *current_sgl; - u32 sgl_offset; - u32 remaining_bytes_in_current_sgl = 0; - enum sci_status status = SCI_SUCCESS; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - sgl_offset = stp_req->type.pio.request_current.sgl_offset; - - if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); - remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset; - } else { - current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); - remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset; - } - - - if (stp_req->type.pio.pio_transfer_bytes > 0) { - if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { - /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ - status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl); - if (status == SCI_SUCCESS) { - stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; - - /* update the current sgl, sgl_offset and save for future */ - current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req); - sgl_offset = 0; - } - } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { - /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */ - scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes); - - if (status == SCI_SUCCESS) { - /* Sgl offset will be adjusted and saved for future */ - sgl_offset += stp_req->type.pio.pio_transfer_bytes; - current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes; - stp_req->type.pio.pio_transfer_bytes = 0; - } - } - } - - if (status == SCI_SUCCESS) { - stp_req->type.pio.request_current.sgl_offset = sgl_offset; - } - - return status; -} - -/** - * - * @stp_request: The request that is used for the SGL processing. - * @data_buffer: The buffer of data to be copied. - * @length: The length of the data transfer. - * - * Copy the data from the buffer for the length specified to the IO reqeust SGL - * specified data region. enum sci_status - */ -static enum sci_status -scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req, - u8 *data_buf, u32 len) -{ - struct scic_sds_request *sci_req; - struct isci_request *ireq; - u8 *src_addr; - int copy_len; - struct sas_task *task; - struct scatterlist *sg; - void *kaddr; - int total_len = len; - - sci_req = to_sci_req(stp_req); - ireq = sci_req_to_ireq(sci_req); - task = isci_request_access_task(ireq); - src_addr = data_buf; - - if (task->num_scatter > 0) { - sg = task->scatter; - - while (total_len > 0) { - struct page *page = sg_page(sg); - - copy_len = min_t(int, total_len, sg_dma_len(sg)); - kaddr = kmap_atomic(page, KM_IRQ0); - memcpy(kaddr + sg->offset, src_addr, copy_len); - kunmap_atomic(kaddr, KM_IRQ0); - total_len -= copy_len; - src_addr += copy_len; - sg = sg_next(sg); - } - } else { - BUG_ON(task->total_xfer_len < total_len); - memcpy(task->scatter, src_addr, total_len); - } - - return SCI_SUCCESS; -} - -/** - * - * @sci_req: The PIO DATA IN request that is to receive the data. - * @data_buffer: The buffer to copy from. - * - * Copy the data buffer to the io request data region. enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( - struct scic_sds_stp_request *sci_req, - u8 *data_buffer) -{ - enum sci_status status; - - /* - * If there is less than 1K remaining in the transfer request - * copy just the data for the transfer */ - if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { - status = scic_sds_stp_request_pio_data_in_copy_data_buffer( - sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes); - - if (status == SCI_SUCCESS) - sci_req->type.pio.pio_transfer_bytes = 0; - } else { - /* We are transfering the whole frame so copy */ - status = scic_sds_stp_request_pio_data_in_copy_data_buffer( - sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); - - if (status == SCI_SUCCESS) - sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; - } - - return status; -} - -/** - * - * @sci_req: - * @completion_code: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - break; - } - - return status; -} - -static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - struct scic_sds_controller *scic = sci_req->owning_controller; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(ireq); - struct dev_to_host_fis *frame_header; - enum sci_status status; - u32 *frame_buffer; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - - switch (frame_header->fis_type) { - case FIS_PIO_SETUP: - /* Get from the frame buffer the PIO Setup Data */ - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - /* Get the data from the PIO Setup The SCU Hardware returns - * first word in the frame_header and the rest of the data is in - * the frame buffer so we need to back up one dword - */ - - /* transfer_count: first 16bits in the 4th dword */ - stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; - - /* ending_status: 4th byte in the 3rd dword */ - stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - sci_req->stp.rsp.status = stp_req->type.pio.ending_status; - - /* The next state is dependent on whether the - * request was PIO Data-in or Data out - */ - if (task->data_dir == DMA_FROM_DEVICE) { - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); - } else if (task->data_dir == DMA_TO_DEVICE) { - /* Transmit data */ - status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); - if (status != SCI_SUCCESS) - break; - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); - } - break; - case FIS_SETDEVBITS: - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); - break; - case FIS_REGD2H: - if (frame_header->status & ATA_BUSY) { - /* Now why is the drive sending a D2H Register FIS when - * it is still busy? Do nothing since we are still in - * the right state. - */ - dev_dbg(scic_to_dev(scic), - "%s: SCIC PIO Request 0x%p received " - "D2H Register FIS with BSY status " - "0x%x\n", __func__, stp_req, - frame_header->status); - break; - } - - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.req, - frame_header, - frame_buffer); - - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - default: - /* FIXME: what do we do here? */ - break; - } - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - struct sata_fis_data *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - - if (frame_header->fis_type == FIS_DATA) { - if (stp_req->type.pio.request_current.sgl_pair == NULL) { - sci_req->saved_rx_frame_index = frame_index; - stp_req->type.pio.pio_transfer_bytes = 0; - } else { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, - (u8 *)frame_buffer); - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - } - - /* Check for the end of the transfer, are there more - * bytes remaining for this data transfer - */ - if (status != SCI_SUCCESS || - stp_req->type.pio.pio_transfer_bytes != 0) - return status; - - if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - } else { - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); - } - } else { - dev_err(scic_to_dev(scic), - "%s: SCIC PIO Request 0x%p received frame %d " - "with fis type 0x%02x when expecting a data " - "fis.\n", __func__, stp_req, frame_index, - frame_header->fis_type); - - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_GOOD, - SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - } - - return status; -} - - -/** - * - * @sci_req: - * @completion_code: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( - - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - bool all_frames_transferred = false; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - /* Transmit data */ - if (stp_req->type.pio.pio_transfer_bytes != 0) { - status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); - if (status == SCI_SUCCESS) { - if (stp_req->type.pio.pio_transfer_bytes == 0) - all_frames_transferred = true; - } - } else if (stp_req->type.pio.pio_transfer_bytes == 0) { - /* - * this will happen if the all data is written at the - * first time after the pio setup fis is received - */ - all_frames_transferred = true; - } - - /* all data transferred. */ - if (all_frames_transferred) { - /* - * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE - * and wait for PIO_SETUP fis / or D2H REg fis. */ - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); - } - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); - break; - } - - return status; -} - -/** - * - * @request: This is the request which is receiving the event. - * @event_code: This is the event code that the request on which the request is - * expected to take action. - * - * This method will handle any link layer events while waiting for the data - * frame. enum sci_status SCI_SUCCESS SCI_FAILURE - */ -static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler( - struct scic_sds_request *request, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_specifier(event_code)) { - case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: - /* - * We are waiting for data and the SCU has R_ERR the data frame. - * Go back to waiting for the D2H Register FIS */ - sci_base_state_machine_change_state( - &request->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); - - status = SCI_SUCCESS; - break; - - default: - dev_err(scic_to_dev(request->owning_controller), - "%s: SCIC PIO Request 0x%p received unexpected " - "event 0x%08x\n", - __func__, request, event_code); - - /* / @todo Should we fail the PIO request when we get an unexpected event? */ - status = SCI_FAILURE; - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_pio_substate_handler_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, - .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, - } -}; - -static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_pio_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req); -} - -static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_pio_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); -} - -static void scic_sds_stp_request_started_pio_data_in_await_data_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_pio_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE - ); -} - -static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_pio_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_stp_request_started_pio_substate_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_await_frame_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_data_in_await_data_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_data_out_transmit_data_enter, - } -}; - -enum sci_status -scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, - bool copy_rx_frame) -{ - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; - - scic_sds_stp_non_ncq_request_construct(sci_req); - - scu_stp_raw_request_construct_task_context(stp_req, - sci_req->task_context_buffer); - - pio->current_transfer_bytes = 0; - pio->ending_error = 0; - pio->ending_status = 0; - - pio->request_current.sgl_offset = 0; - pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; - - if (copy_rx_frame) { - scic_sds_request_build_sgl(sci_req); - /* Since the IO request copy of the TC contains the same data as - * the actual TC this pointer is vaild for either. - */ - pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab; - } else { - /* The user does not want the data copied to the SGL buffer location */ - pio->request_current.sgl_pair = NULL; - } - - sci_base_state_machine_construct(&sci_req->started_substate_machine, - sci_req, - scic_sds_stp_request_started_pio_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE); - - return SCI_SUCCESS; -} - -static void scic_sds_stp_request_udma_complete_request( - struct scic_sds_request *request, - u32 scu_status, - enum sci_status sci_status) -{ - scic_sds_request_set_status(request, scu_status, sci_status); - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); -} - -static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - struct scic_sds_controller *scic = sci_req->owning_controller; - struct dev_to_host_fis *frame_header; - enum sci_status status; - u32 *frame_buffer; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if ((status == SCI_SUCCESS) && - (frame_header->fis_type == FIS_REGD2H)) { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - } - - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - break; - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): - /* - * We must check ther response buffer to see if the D2H Register FIS was - * received before we got the TC completion. */ - if (sci_req->stp.rsp.fis_type == FIS_REGD2H) { - scic_sds_remote_device_suspend(sci_req->target_device, - SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); - - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - } else { - /* - * If we have an error completion status for the TC then we can expect a - * D2H register FIS from the device so we must change state to wait for it */ - sci_base_state_machine_change_state(&sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE); - } - break; - - /* - * / @todo Check to see if any of these completion status need to wait for - * / the device to host register fis. */ - /* / @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0 */ - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): - scic_sds_remote_device_suspend(sci_req->target_device, - SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); - /* Fall through to the default case */ - default: - /* All other completion status cause the IO to be complete. */ - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - break; - } - - return status; -} - -static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - - /* Use the general frame handler to copy the resposne data */ - status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); - - if (status != SCI_SUCCESS) - return status; - - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_udma_substate_handler_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, - .frame_handler = scic_sds_stp_request_udma_general_frame_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, - }, -}; - -static void scic_sds_stp_request_started_udma_await_tc_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_udma_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE - ); -} - -/** - * - * - * This state is entered when there is an TC completion failure. The hardware - * received an unexpected condition while processing the IO request and now - * will UF the D2H register FIS to complete the IO. - */ -static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_udma_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_stp_request_started_udma_substate_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter, - }, -}; - -enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, - u32 len, - enum dma_data_direction dir) -{ - scic_sds_stp_non_ncq_request_construct(sci_req); - - scic_sds_stp_optimized_request_construct(sci_req, SCU_TASK_TYPE_DMA_IN, - len, dir); - - sci_base_state_machine_construct( - &sci_req->started_substate_machine, - sci_req, - scic_sds_stp_request_started_udma_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE - ); - - return SCI_SUCCESS; -} - -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); - - sci_base_state_machine_change_state( - &sci_req->started_substate_machine, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE - ); - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -/** - * - * @request: This parameter specifies the request for which a frame has been - * received. - * @frame_index: This parameter specifies the index of the frame that has been - * received. - * - * This method processes frames received from the target while waiting for a - * device to host register FIS. If a non-register FIS is received during this - * time, it is treated as a protocol violation from an IO perspective. Indicate - * if the received frame was processed successfully. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - - switch (frame_header->fis_type) { - case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - /* The command has completed with error */ - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", __func__, stp_req, - frame_index); - - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); - break; - } - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_io_request_state_handler scic_sds_stp_request_started_soft_reset_substate_handler_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, - .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, - }, -}; - -static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_soft_reset_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req - ); -} - -static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - struct scu_task_context *task_context; - struct host_to_dev_fis *h2d_fis; - enum sci_status status; - - /* Clear the SRST bit */ - h2d_fis = &sci_req->stp.cmd; - h2d_fis->control = 0; - - /* Clear the TC control bit */ - task_context = scic_sds_controller_get_task_context_buffer( - sci_req->owning_controller, sci_req->io_tag); - task_context->control_frame = 0; - - status = scic_controller_continue_io(sci_req); - if (status == SCI_SUCCESS) { - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_soft_reset_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE - ); - } -} - -static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_stp_request_started_soft_reset_substate_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE - ); -} - -static const struct sci_base_state scic_sds_stp_request_started_soft_reset_substate_table[] = { - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_d2h_response_enter, - }, -}; - -enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req) -{ - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - scic_sds_stp_non_ncq_request_construct(sci_req); - - /* Build the STP task context structure */ - scu_stp_raw_request_construct_task_context(stp_req, sci_req->task_context_buffer); - - sci_base_state_machine_construct(&sci_req->started_substate_machine, - sci_req, - scic_sds_stp_request_started_soft_reset_substate_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); - - return SCI_SUCCESS; -} diff --git a/drivers/scsi/isci/stp_request.h b/drivers/scsi/isci/stp_request.h deleted file mode 100644 index eb14874..0000000 --- a/drivers/scsi/isci/stp_request.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_STP_REQUEST_T_ -#define _SCIC_SDS_STP_REQUEST_T_ - -#include -#include - -struct scic_sds_stp_request { - union { - u32 ncq; - - u32 udma; - - struct scic_sds_stp_pio_request { - /** - * Total transfer for the entire PIO request recorded at request constuction - * time. - * - * @todo Should we just decrement this value for each byte of data transitted - * or received to elemenate the current_transfer_bytes field? - */ - u32 total_transfer_bytes; - - /** - * Total number of bytes received/transmitted in data frames since the start - * of the IO request. At the end of the IO request this should equal the - * total_transfer_bytes. - */ - u32 current_transfer_bytes; - - /** - * The number of bytes requested in the in the PIO setup. - */ - u32 pio_transfer_bytes; - - /** - * PIO Setup ending status value to tell us if we need to wait for another FIS - * or if the transfer is complete. On the receipt of a D2H FIS this will be - * the status field of that FIS. - */ - u8 ending_status; - - /** - * On receipt of a D2H FIS this will be the ending error field if the - * ending_status has the SATA_STATUS_ERR bit set. - */ - u8 ending_error; - - struct scic_sds_request_pio_sgl { - struct scu_sgl_element_pair *sgl_pair; - u8 sgl_set; - u32 sgl_offset; - } request_current; - } pio; - - struct { - /** - * The number of bytes requested in the PIO setup before CDB data frame. - */ - u32 device_preferred_cdb_length; - } packet; - } type; -}; - -/** - * enum scic_sds_stp_request_started_udma_substates - This enumeration depicts - * the various sub-states associated with a SATA/STP UDMA protocol operation. - * - * - */ -enum scic_sds_stp_request_started_udma_substates { - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE, -}; - -/** - * enum scic_sds_stp_request_started_non_data_substates - This enumeration - * depicts the various sub-states associated with a SATA/STP non-data - * protocol operation. - * - * - */ -enum scic_sds_stp_request_started_non_data_substates { - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE, -}; - -/** - * enum scic_sds_stp_request_started_soft_reset_substates - THis enumeration - * depicts the various sub-states associated with a SATA/STP soft reset - * operation. - * - * - */ -enum scic_sds_stp_request_started_soft_reset_substates { - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE, -}; - -/* This is the enumeration of the SATA PIO DATA IN started substate machine. */ -enum _scic_sds_stp_request_started_pio_substates { - /** - * While in this state the IO request object is waiting for the TC completion - * notification for the H2D Register FIS - */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE, - - /** - * While in this state the IO request object is waiting for either a PIO Setup - * FIS or a D2H register FIS. The type of frame received is based on the - * result of the prior frame and line conditions. - */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE, - - /** - * While in this state the IO request object is waiting for a DATA frame from - * the device. - */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE, - - /** - * While in this state the IO request object is waiting to transmit the next data - * frame to the device. - */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE, -}; - -struct scic_sds_request; - -enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, - bool copy_rx_frame); -enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, - u32 transfer_length, - enum dma_data_direction dir); -enum sci_status scic_sds_stp_non_data_request_construct(struct scic_sds_request *sci_req); -enum sci_status scic_sds_stp_soft_reset_request_construct(struct scic_sds_request *sci_req); -enum sci_status scic_sds_stp_ncq_request_construct(struct scic_sds_request *sci_req, - u32 transfer_length, - enum dma_data_direction dir); -#endif /* _SCIC_SDS_STP_REQUEST_T_ */ -- cgit v0.10.2 From f00e6ba4996a34f098fe50c78077f0568fd838ec Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 May 2011 02:39:11 -0700 Subject: isci: unify request abort handlers Unify the implementation in scic_sds_io_request_terminate and kill the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index f503e3e..6968863 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -777,16 +777,58 @@ scic_sds_request_start(struct scic_sds_request *request) } enum sci_status -scic_sds_io_request_terminate(struct scic_sds_request *request) +scic_sds_io_request_terminate(struct scic_sds_request *sci_req) { - if (request->state_handlers->abort_handler) - return request->state_handlers->abort_handler(request); + enum sci_base_request_states state; - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to abort while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); + state = sci_req->state_machine.current_state_id; + + switch (state) { + case SCI_BASE_REQUEST_STATE_CONSTRUCTED: + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_TASK_ABORT, + SCI_FAILURE_IO_TERMINATED); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + return SCI_SUCCESS; + case SCI_BASE_REQUEST_STATE_STARTED: + case SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION: + case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE: + case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION: + case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE: + case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE: + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_ABORTING); + return SCI_SUCCESS; + case SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE: + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_ABORTING); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + return SCI_SUCCESS; + case SCI_BASE_REQUEST_STATE_ABORTING: + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + return SCI_SUCCESS; + case SCI_BASE_REQUEST_STATE_COMPLETED: + default: + dev_warn(scic_to_dev(sci_req->owning_controller), + "%s: SCIC IO Request requested to abort while in wrong " + "state %d\n", + __func__, + sci_base_state_machine_get_state(&sci_req->state_machine)); + break; + } return SCI_FAILURE_INVALID_STATE; } @@ -931,34 +973,6 @@ static enum sci_status scic_sds_request_constructed_state_start_handler( } /* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_terminate() request. Since the request - * has not yet been posted to the hardware the request transitions to the - * completed state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_constructed_state_abort_handler( - struct scic_sds_request *request) -{ - /* - * This request has been terminated by the user make sure that the correct - * status code is returned */ - scic_sds_request_set_status(request, - SCU_TASK_DONE_TASK_ABORT, - SCI_FAILURE_IO_TERMINATED); - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_request_started_state_abort_handler(struct scic_sds_request *sci_req) -{ - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); - return SCI_SUCCESS; -} - -/* * scic_sds_request_started_state_tc_completion_handler() - This method process * TC (task context) completions for normal IO request (i.e. Task/Abort * Completions of type 0). This method will update the @@ -1248,26 +1262,6 @@ static enum sci_status scic_sds_request_completed_state_complete_handler( } /* - * ***************************************************************************** - * * ABORTING STATE HANDLERS - * ***************************************************************************** */ - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_terminate() request. This method is the - * io request aborting state abort handlers. On receipt of a multiple - * terminate requests the io request will transition to the completed state. - * This should not happen in normal operation. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_aborting_state_abort_handler( - struct scic_sds_request *request) -{ - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - return SCI_SUCCESS; -} - -/* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_task_completion() request. This method * decodes the completion type waiting for the abort task complete @@ -1379,28 +1373,6 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi } /** - * This method is responsible for processing a terminate/abort request for this - * TC while the request is waiting for the task management response - * unsolicited frame. - * @sci_req: This parameter specifies the request for which the - * termination was requested. - * - * This method returns an indication as to whether the abort request was - * successfully handled. need to update to ensure the received UF doesn't cause - * damage to subsequent requests (i.e. put the extended tag in a holding - * pattern for this particular device). - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_response_abort_handler( - struct scic_sds_request *request) -{ - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - return SCI_SUCCESS; -} - -/** * This method processes an unsolicited frame while the task mgmt request is * waiting for a response frame. It will copy the response data, release * the unsolicited frame, and transition the request to the @@ -2560,81 +2532,63 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han [SCI_BASE_REQUEST_STATE_INITIAL] = { }, [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { .start_handler = scic_sds_request_constructed_state_start_handler, - .abort_handler = scic_sds_request_constructed_state_abort_handler, }, [SCI_BASE_REQUEST_STATE_STARTED] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, .frame_handler = scic_sds_request_started_state_frame_handler, }, [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, }, [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .abort_handler = scic_sds_ssp_task_request_await_tc_response_abort_handler, .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, }, [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, .frame_handler = scic_sds_smp_request_await_response_frame_handler, }, [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, .frame_handler = scic_sds_stp_request_udma_general_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .abort_handler = scic_sds_request_started_state_abort_handler, .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .complete_handler = scic_sds_request_completed_state_complete_handler, }, [SCI_BASE_REQUEST_STATE_ABORTING] = { - .abort_handler = scic_sds_request_aborting_state_abort_handler, .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, .frame_handler = scic_sds_request_aborting_state_frame_handler, }, diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 95b6589..b173369 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -445,12 +445,6 @@ struct scic_sds_io_request_state_handler { scic_sds_io_request_handler_t start_handler; /** - * The abort_handler specifies the method invoked when a user attempts to - * abort a request. - */ - scic_sds_io_request_handler_t abort_handler; - - /** * The complete_handler specifies the method invoked when a user attempts to * complete a request. */ @@ -459,7 +453,6 @@ struct scic_sds_io_request_state_handler { scic_sds_io_request_task_completion_handler_t tc_completion_handler; scic_sds_io_request_event_handler_t event_handler; scic_sds_io_request_frame_handler_t frame_handler; - }; /** -- cgit v0.10.2 From f4636a7b2ab8288466b83a8459d47c43143a70dc Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Tue, 10 May 2011 23:50:32 +0000 Subject: isci: unify request start handlers Unify the implementation in scic_sds_request_start and kill the state handler. Reported-by: Christoph Hellwig Signed-off-by: Piotr Sawicki [remove scic_sds_request_constructed_state_start_handler] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 0bb639d..606ee2b 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -515,7 +515,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic if (status != SCI_SUCCESS) break; - status = sci_req->state_handlers->start_handler(sci_req); + status = scic_sds_request_start(sci_req); if (status != SCI_SUCCESS) break; @@ -540,7 +540,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic if (status != SCI_SUCCESS) break; - status = sci_req->state_handlers->start_handler(sci_req); + status = scic_sds_request_start(sci_req); } else return SCI_FAILURE_INVALID_STATE; break; @@ -709,7 +709,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc if (status != SCI_SUCCESS) goto out; - status = sci_req->state_handlers->start_handler(sci_req); + status = scic_sds_request_start(sci_req); if (status != SCI_SUCCESS) goto out; diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 6968863..41a418d 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -757,23 +757,80 @@ static u32 sci_req_tx_bytes(struct scic_sds_request *sci_req) return ret_val; } -enum sci_status -scic_sds_request_start(struct scic_sds_request *request) +enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) { - if (request->device_sequence != - scic_sds_remote_device_get_sequence(request->target_device)) + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scu_task_context *task_context; + enum sci_base_request_states state; + + if (sci_req->device_sequence != + scic_sds_remote_device_get_sequence(sci_req->target_device)) return SCI_FAILURE; - if (request->state_handlers->start_handler) - return request->state_handlers->start_handler(request); + state = sci_req->state_machine.current_state_id; + if (state != SCI_BASE_REQUEST_STATE_CONSTRUCTED) { + dev_warn(scic_to_dev(scic), + "%s: SCIC IO Request requested to start while in wrong " + "state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request requested to start while in wrong " - "state %d\n", - __func__, - sci_base_state_machine_get_state(&request->state_machine)); + /* if necessary, allocate a TCi for the io request object and then will, + * if necessary, copy the constructed TC data into the actual TC buffer. + * If everything is successful the post context field is updated with + * the TCi so the controller can post the request to the hardware. + */ + if (sci_req->io_tag == SCI_CONTROLLER_INVALID_IO_TAG) + sci_req->io_tag = scic_controller_allocate_io_tag(scic); - return SCI_FAILURE_INVALID_STATE; + /* Record the IO Tag in the request */ + if (sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { + task_context = sci_req->task_context_buffer; + + task_context->task_index = scic_sds_io_tag_get_index(sci_req->io_tag); + + switch (task_context->protocol_type) { + case SCU_TASK_CONTEXT_PROTOCOL_SMP: + case SCU_TASK_CONTEXT_PROTOCOL_SSP: + /* SSP/SMP Frame */ + task_context->type.ssp.tag = sci_req->io_tag; + task_context->type.ssp.target_port_transfer_tag = + 0xFFFF; + break; + + case SCU_TASK_CONTEXT_PROTOCOL_STP: + /* STP/SATA Frame + * task_context->type.stp.ncq_tag = sci_req->ncq_tag; + */ + break; + + case SCU_TASK_CONTEXT_PROTOCOL_NONE: + /* / @todo When do we set no protocol type? */ + break; + + default: + /* This should never happen since we build the IO + * requests */ + break; + } + + /* + * Check to see if we need to copy the task context buffer + * or have been building into the task context buffer */ + if (sci_req->was_tag_assigned_by_user == false) + scic_sds_controller_copy_task_context(scic, sci_req); + + /* Add to the post_context the io tag value */ + sci_req->post_context |= scic_sds_io_tag_get_index(sci_req->io_tag); + + /* Everything is good go ahead and change state */ + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_STARTED); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INSUFFICIENT_RESOURCES; } enum sci_status @@ -904,75 +961,6 @@ static void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) } /* - * This method implements the action taken when a constructed - * SCIC_SDS_IO_REQUEST_T object receives a scic_sds_request_start() request. - * This method will, if necessary, allocate a TCi for the io request object and - * then will, if necessary, copy the constructed TC data into the actual TC - * buffer. If everything is successful the post context field is updated with - * the TCi so the controller can post the request to the hardware. enum sci_status - * SCI_SUCCESS SCI_FAILURE_INSUFFICIENT_RESOURCES - */ -static enum sci_status scic_sds_request_constructed_state_start_handler( - struct scic_sds_request *request) -{ - struct scu_task_context *task_context; - - if (request->io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { - request->io_tag = - scic_controller_allocate_io_tag(request->owning_controller); - } - - /* Record the IO Tag in the request */ - if (request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { - task_context = request->task_context_buffer; - - task_context->task_index = scic_sds_io_tag_get_index(request->io_tag); - - switch (task_context->protocol_type) { - case SCU_TASK_CONTEXT_PROTOCOL_SMP: - case SCU_TASK_CONTEXT_PROTOCOL_SSP: - /* SSP/SMP Frame */ - task_context->type.ssp.tag = request->io_tag; - task_context->type.ssp.target_port_transfer_tag = 0xFFFF; - break; - - case SCU_TASK_CONTEXT_PROTOCOL_STP: - /* - * STP/SATA Frame - * task_context->type.stp.ncq_tag = request->ncq_tag; */ - break; - - case SCU_TASK_CONTEXT_PROTOCOL_NONE: - /* / @todo When do we set no protocol type? */ - break; - - default: - /* This should never happen since we build the IO requests */ - break; - } - - /* - * Check to see if we need to copy the task context buffer - * or have been building into the task context buffer */ - if (request->was_tag_assigned_by_user == false) { - scic_sds_controller_copy_task_context( - request->owning_controller, request); - } - - /* Add to the post_context the io tag value */ - request->post_context |= scic_sds_io_tag_get_index(request->io_tag); - - /* Everything is good go ahead and change state */ - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_STARTED); - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INSUFFICIENT_RESOURCES; -} - -/* * scic_sds_request_started_state_tc_completion_handler() - This method process * TC (task context) completions for normal IO request (i.e. Task/Abort * Completions of type 0). This method will update the @@ -2529,10 +2517,8 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( } static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { - [SCI_BASE_REQUEST_STATE_INITIAL] = { }, - [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { - .start_handler = scic_sds_request_constructed_state_start_handler, - }, + [SCI_BASE_REQUEST_STATE_INITIAL] = {}, + [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = {}, [SCI_BASE_REQUEST_STATE_STARTED] = { .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, .frame_handler = scic_sds_request_started_state_frame_handler, diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index b173369..bf8ac18 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -439,12 +439,6 @@ typedef enum sci_status (*scic_sds_io_request_task_completion_handler_t) */ struct scic_sds_io_request_state_handler { /** - * The start_handler specifies the method invoked when a user attempts to - * start a request. - */ - scic_sds_io_request_handler_t start_handler; - - /** * The complete_handler specifies the method invoked when a user attempts to * complete a request. */ -- cgit v0.10.2 From d1c637c35b33ddd2b405956e04b50939bb10ed2a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 11 May 2011 08:27:47 -0700 Subject: isci: unify request frame handlers Unify the implementation in scic_sds_io_request_frame_handler and kill the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 606ee2b..b900e2c 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -310,8 +310,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi sci_req = scic_request_by_tag(scic, be16_to_cpu(hdr.tag)); if (sci_req && sci_req->target_device == sci_dev) { /* The IO request is now in charge of releasing the frame */ - status = sci_req->state_handlers->frame_handler(sci_req, - frame_index); + status = scic_sds_io_request_frame_handler(sci_req, frame_index); } else { /* We could not map this tag to a valid IO * request Just toss the frame and continue diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 41a418d..b9f97e8 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -907,34 +907,6 @@ enum sci_status scic_sds_io_request_event_handler( return SCI_FAILURE_INVALID_STATE; } -/** - * - * @sci_req: The SCIC_SDS_IO_REQUEST_T object for which the start - * operation is to be executed. - * @frame_index: The frame index returned by the hardware for the reqeust - * object. - * - * This method invokes the core state frame handler for the - * SCIC_SDS_IO_REQUEST_T object. enum sci_status - */ -enum sci_status scic_sds_io_request_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - if (request->state_handlers->frame_handler) - return request->state_handlers->frame_handler(request, frame_index); - - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given unexpected frame %x while in " - "state %d\n", - __func__, - frame_index, - sci_base_state_machine_get_state(&request->state_machine)); - - scic_sds_controller_release_frame(request->owning_controller, frame_index); - return SCI_FAILURE_INVALID_STATE; -} - /* * This function copies response data for requests returning response data * instead of sense data. @@ -1151,81 +1123,6 @@ scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completi /* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_frame_handler() request. This method - * first determines the frame type received. If this is a response frame then - * the response data is copied to the io request response buffer for processing - * at completion time. If the frame type is not a response buffer an error is - * logged. enum sci_status SCI_SUCCESS SCI_FAILURE_INVALID_PARAMETER_VALUE - */ -static enum sci_status -scic_sds_request_started_state_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - u32 *frame_header; - struct ssp_frame_hdr ssp_hdr; - ssize_t word_cnt; - - status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - (void **)&frame_header); - - word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32); - sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt); - - if (ssp_hdr.frame_type == SSP_RESPONSE) { - struct ssp_response_iu *resp_iu; - ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - - status = scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - (void **)&resp_iu); - - sci_swab32_cpy(&sci_req->ssp.rsp, - resp_iu, word_cnt); - - resp_iu = &sci_req->ssp.rsp; - - if ((resp_iu->datapres == 0x01) || - (resp_iu->datapres == 0x02)) { - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - } else - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - } else { - /* This was not a response frame why did it get forwarded? */ - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p received unexpected " - "frame %d type 0x%02x\n", - __func__, - sci_req, - frame_index, - ssp_hdr.frame_type); - } - - /* - * In any case we are done with this frame buffer return it to the - * controller - */ - scic_sds_controller_release_frame( - sci_req->owning_controller, frame_index); - - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * COMPLETED STATE HANDLERS - * ***************************************************************************** */ - - -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_complete() request. This method frees up * any io request resources that have been allocated and transitions the * request to its final state. Consider stopping the state machine instead of @@ -1281,24 +1178,6 @@ static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( return SCI_SUCCESS; } -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_frame_handler() request. This method - * discards the unsolicited frame since we are waiting for the abort task - * completion. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_aborting_state_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - /* TODO: Is it even possible to get an unsolicited frame in the aborting state? */ - - scic_sds_controller_release_frame( - sci_req->owning_controller, frame_index); - - return SCI_SUCCESS; -} - /** * This method processes the completions transport layer (TL) status to * determine if the RAW task management frame was sent successfully. If the @@ -1361,34 +1240,6 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi } /** - * This method processes an unsolicited frame while the task mgmt request is - * waiting for a response frame. It will copy the response data, release - * the unsolicited frame, and transition the request to the - * SCI_BASE_REQUEST_STATE_COMPLETED state. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This method returns an indication of whether the TC response frame was - * handled successfully or not. SCI_SUCCESS Currently this value is always - * returned and indicates successful processing of the TC response. Should - * probably update to check frame type and make sure it is a response frame. - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_response_frame_handler( - struct scic_sds_request *request, - u32 frame_index) -{ - scic_sds_io_request_copy_response(request); - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - scic_sds_controller_release_frame(request->owning_controller, - frame_index); - return SCI_SUCCESS; -} - -/** * This method processes an abnormal TC completion while the SMP request is * waiting for a response frame. It decides what happened to the IO based * on TC completion status. @@ -1450,81 +1301,6 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler return SCI_SUCCESS; } -/* - * This function processes an unsolicited frame while the SMP request is waiting - * for a response frame. It will copy the response data, release the - * unsolicited frame, and transition the request to the - * SCI_BASE_REQUEST_STATE_COMPLETED state. - * @sci_req: This parameter specifies the request for which the - * unsolicited frame was received. - * @frame_index: This parameter indicates the unsolicited frame index that - * should contain the response. - * - * This function returns an indication of whether the response frame was handled - * successfully or not. SCI_SUCCESS Currently this value is always returned and - * indicates successful processing of the TC response. - */ -static enum sci_status -scic_sds_smp_request_await_response_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - void *frame_header; - struct smp_resp *rsp_hdr = &sci_req->smp.rsp; - ssize_t word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); - - status = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - &frame_header); - - /* byte swap the header. */ - sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); - - if (rsp_hdr->frame_type == SMP_RESPONSE) { - void *smp_resp; - - status = scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_request_get_controller(sci_req)->uf_control), - frame_index, - &smp_resp); - - word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / - sizeof(u32); - - sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, - smp_resp, word_cnt); - - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); - } else { - /* This was not a response frame why did it get forwarded? */ - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC SMP Request 0x%p received unexpected frame " - "%d type 0x%02x\n", - __func__, - sci_req, - frame_index, - rsp_hdr->frame_type); - - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_SMP_FRM_TYPE_ERR, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - } - - scic_sds_controller_release_frame(sci_req->owning_controller, - frame_index); - - return SCI_SUCCESS; -} - /** * This method processes the completions transport layer (TL) status to * determine if the SMP request was sent successfully. If the SMP request @@ -1668,76 +1444,6 @@ static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_han return SCI_SUCCESS; } -/** - * - * @request: This parameter specifies the request for which a frame has been - * received. - * @frame_index: This parameter specifies the index of the frame that has been - * received. - * - * This method processes frames received from the target while waiting for a - * device to host register FIS. If a non-register FIS is received during this - * time, it is treated as a protocol violation from an IO perspective. Indicate - * if the received frame was processed successfully. - */ -static enum sci_status scic_sds_stp_request_non_data_await_d2h_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(sci_req->owning_controller), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - - return status; - } - - switch (frame_header->fis_type) { - case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - /* The command has completed with error */ - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", __func__, stp_req, - frame_index); - - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); - break; - } - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - #define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ /* transmit DATA_FIS from (current sgl + offset) for input @@ -1952,248 +1658,58 @@ static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completi return status; } -static enum sci_status scic_sds_stp_request_pio_await_frame_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) +static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( + + struct scic_sds_request *sci_req, + u32 completion_code) { - struct scic_sds_controller *scic = sci_req->owning_controller; + enum sci_status status = SCI_SUCCESS; + bool all_frames_transferred = false; struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(ireq); - struct dev_to_host_fis *frame_header; - enum sci_status status; - u32 *frame_buffer; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - switch (frame_header->fis_type) { - case FIS_PIO_SETUP: - /* Get from the frame buffer the PIO Setup Data */ - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - /* Get the data from the PIO Setup The SCU Hardware returns - * first word in the frame_header and the rest of the data is in - * the frame buffer so we need to back up one dword - */ - - /* transfer_count: first 16bits in the 4th dword */ - stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; - - /* ending_status: 4th byte in the 3rd dword */ - stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - sci_req->stp.rsp.status = stp_req->type.pio.ending_status; - - /* The next state is dependent on whether the - * request was PIO Data-in or Data out - */ - if (task->data_dir == DMA_FROM_DEVICE) { - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); - } else if (task->data_dir == DMA_TO_DEVICE) { - /* Transmit data */ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* Transmit data */ + if (stp_req->type.pio.pio_transfer_bytes != 0) { status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); - if (status != SCI_SUCCESS) - break; - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); - } - break; - case FIS_SETDEVBITS: - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); - break; - case FIS_REGD2H: - if (frame_header->status & ATA_BUSY) { - /* Now why is the drive sending a D2H Register FIS when - * it is still busy? Do nothing since we are still in - * the right state. + if (status == SCI_SUCCESS) { + if (stp_req->type.pio.pio_transfer_bytes == 0) + all_frames_transferred = true; + } + } else if (stp_req->type.pio.pio_transfer_bytes == 0) { + /* + * this will happen if the all data is written at the + * first time after the pio setup fis is received */ - dev_dbg(scic_to_dev(scic), - "%s: SCIC PIO Request 0x%p received " - "D2H Register FIS with BSY status " - "0x%x\n", __func__, stp_req, - frame_header->status); - break; + all_frames_transferred = true; } - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.req, - frame_header, - frame_buffer); - - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + /* all data transferred. */ + if (all_frames_transferred) { + /* + * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE + * and wait for PIO_SETUP fis / or D2H REg fis. */ + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE + ); + } break; + default: - /* FIXME: what do we do here? */ - break; - } - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - -static enum sci_status scic_sds_stp_request_pio_data_in_await_data_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - struct sata_fis_data *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - - if (frame_header->fis_type == FIS_DATA) { - if (stp_req->type.pio.request_current.sgl_pair == NULL) { - sci_req->saved_rx_frame_index = frame_index; - stp_req->type.pio.pio_transfer_bytes = 0; - } else { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, - (u8 *)frame_buffer); - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - } - - /* Check for the end of the transfer, are there more - * bytes remaining for this data transfer - */ - if (status != SCI_SUCCESS || - stp_req->type.pio.pio_transfer_bytes != 0) - return status; - - if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - } else { - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); - } - } else { - dev_err(scic_to_dev(scic), - "%s: SCIC PIO Request 0x%p received frame %d " - "with fis type 0x%02x when expecting a data " - "fis.\n", __func__, stp_req, frame_index, - frame_header->fis_type); - - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_GOOD, - SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - } - - return status; -} - - -/** - * - * @sci_req: - * @completion_code: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( - - struct scic_sds_request *sci_req, - u32 completion_code) -{ - enum sci_status status = SCI_SUCCESS; - bool all_frames_transferred = false; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - /* Transmit data */ - if (stp_req->type.pio.pio_transfer_bytes != 0) { - status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); - if (status == SCI_SUCCESS) { - if (stp_req->type.pio.pio_transfer_bytes == 0) - all_frames_transferred = true; - } - } else if (stp_req->type.pio.pio_transfer_bytes == 0) { - /* - * this will happen if the all data is written at the - * first time after the pio setup fis is received - */ - all_frames_transferred = true; - } - - /* all data transferred. */ - if (all_frames_transferred) { - /* - * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE - * and wait for PIO_SETUP fis / or D2H REg fis. */ - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); - } - break; - - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); - - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + /* + * All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. */ + scic_sds_request_set_status( + sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR + ); + + sci_base_state_machine_change_state( + &sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED + ); break; } @@ -2280,6 +1796,422 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct sc return status; } +enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) +{ + struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + enum sci_base_request_states state; + enum sci_status status; + ssize_t word_cnt; + + state = sci_req->state_machine.current_state_id; + switch (state) { + case SCI_BASE_REQUEST_STATE_STARTED: { + struct ssp_frame_hdr ssp_hdr; + void *frame_header; + + scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + &frame_header); + + word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32); + sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt); + + if (ssp_hdr.frame_type == SSP_RESPONSE) { + struct ssp_response_iu *resp_iu; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&resp_iu); + + sci_swab32_cpy(&sci_req->ssp.rsp, resp_iu, word_cnt); + + resp_iu = &sci_req->ssp.rsp; + + if (resp_iu->datapres == 0x01 || + resp_iu->datapres == 0x02) { + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + } else + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS); + } else { + /* not a response frame, why did it get forwarded? */ + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p received unexpected " + "frame %d type 0x%02x\n", __func__, sci_req, + frame_index, ssp_hdr.frame_type); + } + + /* + * In any case we are done with this frame buffer return it to the + * controller + */ + scic_sds_controller_release_frame(scic, frame_index); + + return SCI_SUCCESS; + } + case SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE: + scic_sds_io_request_copy_response(sci_req); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + scic_sds_controller_release_frame(scic,frame_index); + return SCI_SUCCESS; + case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE: { + struct smp_resp *rsp_hdr = &sci_req->smp.rsp; + void *frame_header; + + scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + &frame_header); + + /* byte swap the header. */ + word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); + sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); + + if (rsp_hdr->frame_type == SMP_RESPONSE) { + void *smp_resp; + + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + &smp_resp); + + word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / + sizeof(u32); + + sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, + smp_resp, word_cnt); + + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + SCI_SUCCESS); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); + } else { + /* This was not a response frame why did it get forwarded? */ + dev_err(scic_to_dev(scic), + "%s: SCIC SMP Request 0x%p received unexpected frame " + "%d type 0x%02x\n", __func__, sci_req, + frame_index, rsp_hdr->frame_type); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_SMP_FRM_TYPE_ERR, + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + } + + scic_sds_controller_release_frame(scic, frame_index); + + return SCI_SUCCESS; + } + case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE: + return scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); + case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE: + /* Use the general frame handler to copy the resposne data */ + status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); + + if (status != SCI_SUCCESS) + return status; + + scic_sds_stp_request_udma_complete_request(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + return SCI_SUCCESS; + case SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE: { + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + break; + + default: + dev_warn(scic_to_dev(scic), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION); + break; + } + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; + } + case SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE: { + struct isci_request *ireq = sci_req_to_ireq(sci_req); + struct sas_task *task = isci_request_access_task(ireq); + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_PIO_SETUP: + /* Get from the frame buffer the PIO Setup Data */ + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + /* Get the data from the PIO Setup The SCU Hardware returns + * first word in the frame_header and the rest of the data is in + * the frame buffer so we need to back up one dword + */ + + /* transfer_count: first 16bits in the 4th dword */ + stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; + + /* ending_status: 4th byte in the 3rd dword */ + stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + sci_req->stp.rsp.status = stp_req->type.pio.ending_status; + + /* The next state is dependent on whether the + * request was PIO Data-in or Data out + */ + if (task->data_dir == DMA_FROM_DEVICE) { + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); + } else if (task->data_dir == DMA_TO_DEVICE) { + /* Transmit data */ + status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); + if (status != SCI_SUCCESS) + break; + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); + } + break; + case FIS_SETDEVBITS: + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + break; + case FIS_REGD2H: + if (frame_header->status & ATA_BUSY) { + /* Now why is the drive sending a D2H Register FIS when + * it is still busy? Do nothing since we are still in + * the right state. + */ + dev_dbg(scic_to_dev(scic), + "%s: SCIC PIO Request 0x%p received " + "D2H Register FIS with BSY status " + "0x%x\n", __func__, stp_req, + frame_header->status); + break; + } + + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.req, + frame_header, + frame_buffer); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + break; + default: + /* FIXME: what do we do here? */ + break; + } + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; + } + case SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE: { + struct dev_to_host_fis *frame_header; + struct sata_fis_data *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + if (frame_header->fis_type != FIS_DATA) { + dev_err(scic_to_dev(scic), + "%s: SCIC PIO Request 0x%p received frame %d " + "with fis type 0x%02x when expecting a data " + "fis.\n", __func__, stp_req, frame_index, + frame_header->fis_type); + + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + return status; + } + + if (stp_req->type.pio.request_current.sgl_pair == NULL) { + sci_req->saved_rx_frame_index = frame_index; + stp_req->type.pio.pio_transfer_bytes = 0; + } else { + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, + (u8 *)frame_buffer); + + /* Frame is decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + } + + /* Check for the end of the transfer, are there more + * bytes remaining for this data transfer + */ + if (status != SCI_SUCCESS || + stp_req->type.pio.pio_transfer_bytes != 0) + return status; + + if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + } else { + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + } + return status; + } + case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE: { + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_header); + if (status != SCI_SUCCESS) { + dev_err(scic_to_dev(scic), + "%s: SCIC IO Request 0x%p could not get frame header " + "for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&frame_buffer); + + scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); + break; + default: + dev_warn(scic_to_dev(scic), + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + SCI_FAILURE_PROTOCOL_VIOLATION); + break; + } + + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); + + /* Frame has been decoded return it to the controller */ + scic_sds_controller_release_frame(scic, frame_index); + + return status; + } + case SCI_BASE_REQUEST_STATE_ABORTING: + /* TODO: Is it even possible to get an unsolicited frame in the + * aborting state? + */ + scic_sds_controller_release_frame(scic, frame_index); + return SCI_SUCCESS; + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC IO Request given unexpected frame %x while in " + "state %d\n", __func__, frame_index, state); + + scic_sds_controller_release_frame(scic, frame_index); + return SCI_FAILURE_INVALID_STATE; + } +} + + + + static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( struct scic_sds_request *sci_req, u32 completion_code) @@ -2336,32 +2268,6 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi return status; } -static enum sci_status scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - - /* Use the general frame handler to copy the resposne data */ - status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); - - if (status != SCI_SUCCESS) - return status; - - scic_sds_stp_request_udma_complete_request(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - - return status; -} - -enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, - u32 len, - enum dma_data_direction dir) -{ - return SCI_SUCCESS; -} - /** * * @sci_req: @@ -2447,117 +2353,36 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_c return SCI_SUCCESS; } -/** - * - * @request: This parameter specifies the request for which a frame has been - * received. - * @frame_index: This parameter specifies the index of the frame that has been - * received. - * - * This method processes frames received from the target while waiting for a - * device to host register FIS. If a non-register FIS is received during this - * time, it is treated as a protocol violation from an IO perspective. Indicate - * if the received frame was processed successfully. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_d2h_frame_handler( - struct scic_sds_request *sci_req, - u32 frame_index) -{ - enum sci_status status; - struct dev_to_host_fis *frame_header; - u32 *frame_buffer; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_controller *scic = sci_req->owning_controller; - - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_header); - if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); - return status; - } - - switch (frame_header->fis_type) { - case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&frame_buffer); - - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, - frame_header, - frame_buffer); - - /* The command has completed with error */ - scic_sds_request_set_status(sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - break; - - default: - dev_warn(scic_to_dev(scic), - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", __func__, stp_req, - frame_index); - - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); - break; - } - - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); - - /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); - - return status; -} - static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = {}, [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = {}, [SCI_BASE_REQUEST_STATE_STARTED] = { .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, - .frame_handler = scic_sds_request_started_state_frame_handler, }, [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .frame_handler = scic_sds_ssp_task_request_await_tc_response_frame_handler, - }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { }, [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, - .frame_handler = scic_sds_smp_request_await_response_frame_handler, }, [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, }, [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, - .frame_handler = scic_sds_stp_request_udma_general_frame_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .frame_handler = scic_sds_stp_request_udma_await_d2h_reg_fis_frame_handler, }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .frame_handler = scic_sds_stp_request_non_data_await_d2h_frame_handler, - }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .frame_handler = scic_sds_stp_request_pio_await_frame_frame_handler - }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, - .frame_handler = scic_sds_stp_request_pio_data_in_await_data_frame_handler }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, @@ -2568,15 +2393,12 @@ static const struct scic_sds_io_request_state_handler scic_sds_request_state_han [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .frame_handler = scic_sds_stp_request_soft_reset_await_d2h_frame_handler, - }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .complete_handler = scic_sds_request_completed_state_complete_handler, }, [SCI_BASE_REQUEST_STATE_ABORTING] = { .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, - .frame_handler = scic_sds_request_aborting_state_frame_handler, }, [SCI_BASE_REQUEST_STATE_FINAL] = { }, }; diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index bf8ac18..c9070e7 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -424,8 +424,6 @@ enum sci_base_request_states { typedef enum sci_status (*scic_sds_io_request_handler_t) (struct scic_sds_request *request); -typedef enum sci_status (*scic_sds_io_request_frame_handler_t) - (struct scic_sds_request *req, u32 frame); typedef enum sci_status (*scic_sds_io_request_event_handler_t) (struct scic_sds_request *req, u32 event); typedef enum sci_status (*scic_sds_io_request_task_completion_handler_t) @@ -446,7 +444,6 @@ struct scic_sds_io_request_state_handler { scic_sds_io_request_task_completion_handler_t tc_completion_handler; scic_sds_io_request_event_handler_t event_handler; - scic_sds_io_request_frame_handler_t frame_handler; }; /** @@ -839,9 +836,6 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_request *sci_req); enum sci_status scic_task_request_construct_ssp(struct scic_sds_request *sci_req); enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req); -enum sci_status scic_sds_stp_udma_request_construct(struct scic_sds_request *sci_req, - u32 transfer_length, - enum dma_data_direction dir); void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); #endif /* !defined(_ISCI_REQUEST_H_) */ -- cgit v0.10.2 From a7e255a34220ba57eeeb75637c911974e54c08e7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 11 May 2011 08:27:47 -0700 Subject: isci: remove request task context completion state handler Unlike the other conversions this only updates scic_sds_io_request_tc_completion() to call the old state handlers directly (with less verbose names). This was done for future patch readability, the implementations have only minor differences for different completion codes. Without a reference to the function name it would be difficult to dicern which state is being updated. Considered changing the order to look up the completion code before the state but that was not a clean conversion either. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index b9f97e8..cb13b78 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -932,27 +932,14 @@ static void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) memcpy(resp_buf, ssp_response->resp_data, len); } -/* - * scic_sds_request_started_state_tc_completion_handler() - This method process - * TC (task context) completions for normal IO request (i.e. Task/Abort - * Completions of type 0). This method will update the - * SCIC_SDS_IO_REQUEST_T::status field. - * @sci_req: This parameter specifies the request for which a completion - * occurred. - * @completion_code: This parameter specifies the completion code received from - * the SCU. - * - */ -static enum sci_status -scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status request_started_state_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { - u8 datapres; struct ssp_response_iu *resp_iu; + u8 datapres; - /* - * TODO: Any SDMA return code of other than 0 is bad - * decode 0x003C0000 to determine SDMA status + /* TODO: Any SDMA return code of other than 0 is bad decode 0x003C0000 + * to determine SDMA status */ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): @@ -960,11 +947,8 @@ scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sc SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): - { - /* - * There are times when the SCU hardware will return an early + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): { + /* There are times when the SCU hardware will return an early * response because the io request specified more data than is * returned by the target device (mode pages, inquiry data, * etc.). We must check the response stats to see if this is @@ -979,21 +963,17 @@ scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sc word_cnt); if (resp->status == 0) { - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS_IO_DONE_EARLY); + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS_IO_DONE_EARLY); } else { - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); } + break; } - break; - - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): - { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): { ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); sci_swab32_cpy(&sci_req->ssp.rsp, @@ -1007,24 +987,22 @@ scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sc } case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): - /* - * / @todo With TASK_DONE_RESP_LEN_ERR is the response frame + /* TODO With TASK_DONE_RESP_LEN_ERR is the response frame * guaranteed to be received before this completion status is * posted? */ resp_iu = &sci_req->ssp.rsp; datapres = resp_iu->datapres; - if ((datapres == 0x01) || (datapres == 0x02)) { - scic_sds_request_set_status( - sci_req, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); + if (datapres == 1 || datapres == 2) { + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_CHECK_RESPONSE, + SCI_FAILURE_IO_RESPONSE_VALID); } else - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS); break; - /* only stp device gets suspended. */ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR): @@ -1038,14 +1016,12 @@ scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sc case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): if (sci_req->protocol == SCIC_STP_PROTOCOL) { - scic_sds_request_set_status( - sci_req, + scic_sds_request_set_status(sci_req, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); } else { - scic_sds_request_set_status( - sci_req, + scic_sds_request_set_status(sci_req, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -1063,11 +1039,10 @@ scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sc case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): - scic_sds_request_set_status( - sci_req, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); + scic_sds_request_set_status(sci_req, + SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT, + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); break; /* neither ssp nor stp gets suspended. */ @@ -1105,22 +1080,6 @@ scic_sds_request_started_state_tc_completion_handler(struct scic_sds_request *sc return SCI_SUCCESS; } -enum sci_status -scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code) -{ - if (request->state_handlers->tc_completion_handler) - return request->state_handlers->tc_completion_handler(request, completion_code); - - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given task completion notification %x " - "while in wrong state %d\n", - __func__, - completion_code, - sci_base_state_machine_get_state(&request->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - /* * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T * object receives a scic_sds_request_complete() request. This method frees up @@ -1146,54 +1105,32 @@ static enum sci_status scic_sds_request_completed_state_complete_handler( return SCI_SUCCESS; } -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_task_completion() request. This method - * decodes the completion type waiting for the abort task complete - * notification. When the abort task complete is received the io request - * transitions to the completed state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_aborting_state_tc_completion_handler( +static enum sci_status request_aborting_state_tc_event( struct scic_sds_request *sci_req, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED - ); + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_TASK_ABORT, + SCI_FAILURE_IO_TERMINATED); sci_base_state_machine_change_state(&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; default: - /* - * Unless we get some strange error wait for the task abort to complete - * TODO: Should there be a state change for this completion? */ + /* Unless we get some strange error wait for the task abort to complete + * TODO: Should there be a state change for this completion? + */ break; } return SCI_SUCCESS; } -/** - * This method processes the completions transport layer (TL) status to - * determine if the RAW task management frame was sent successfully. If the - * raw frame was sent successfully, then the state for the task request - * transitions to waiting for a response frame. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): @@ -1203,33 +1140,27 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi sci_base_state_machine_change_state(&sci_req->state_machine, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); break; - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): - /* - * Currently, the decision is to simply allow the task request to - * timeout if the task IU wasn't received successfully. - * There is a potential for receiving multiple task responses if we - * decide to send the task IU again. */ + /* Currently, the decision is to simply allow the task request + * to timeout if the task IU wasn't received successfully. + * There is a potential for receiving multiple task responses if + * we decide to send the task IU again. + */ dev_warn(scic_to_dev(sci_req->owning_controller), "%s: TaskRequest:0x%p CompletionCode:%x - " - "ACK/NAK timeout\n", - __func__, - sci_req, + "ACK/NAK timeout\n", __func__, sci_req, completion_code); sci_base_state_machine_change_state(&sci_req->state_machine, SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); break; - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, + /* All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request. + */ + scic_sds_request_set_status(sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); sci_base_state_machine_change_state(&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); @@ -1239,27 +1170,15 @@ static enum sci_status scic_sds_ssp_task_request_await_tc_completion_tc_completi return SCI_SUCCESS; } -/** - * This method processes an abnormal TC completion while the SMP request is - * waiting for a response frame. It decides what happened to the IO based - * on TC completion status. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status smp_request_await_response_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - /* - * In the AWAIT RESPONSE state, any TC completion is unexpected. - * but if the TC has success status, we complete the IO anyway. */ + /* In the AWAIT RESPONSE state, any TC completion is + * unexpected. but if the TC has success status, we + * complete the IO anyway. + */ scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); @@ -1271,11 +1190,13 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): - /* - * These status has been seen in a specific LSI expander, which sometimes - * is not able to send smp response within 2 ms. This causes our hardware - * break the connection and set TC completion with one of these SMP_XXX_XX_ERR - * status. For these type of error, we ask scic user to retry the request. */ + /* These status has been seen in a specific LSI + * expander, which sometimes is not able to send smp + * response within 2 ms. This causes our hardware break + * the connection and set TC completion with one of + * these SMP_XXX_XX_ERR status. For these type of error, + * we ask scic user to retry the request. + */ scic_sds_request_set_status(sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED); @@ -1284,14 +1205,12 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler break; default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + /* All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request + */ + scic_sds_request_set_status(sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); sci_base_state_machine_change_state(&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); @@ -1301,22 +1220,8 @@ static enum sci_status scic_sds_smp_request_await_response_tc_completion_handler return SCI_SUCCESS; } -/** - * This method processes the completions transport layer (TL) status to - * determine if the SMP request was sent successfully. If the SMP request - * was sent successfully, then the state for the SMP request transits to - * waiting for a response frame. - * @sci_req: This parameter specifies the request for which the TC - * completion was received. - * @completion_code: This parameter indicates the completion status information - * for the TC. - * - * Indicate if the tc completion handler was successful. SCI_SUCCESS currently - * this method always returns success. - */ -static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status smp_request_await_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): @@ -1326,20 +1231,17 @@ static enum sci_status scic_sds_smp_request_await_tc_completion_tc_completion_ha sci_base_state_machine_change_state(&sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); break; - default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + scic_sds_request_set_status(sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -1400,44 +1302,29 @@ static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic return current_sgl; } -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_non_data_await_h2d_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status stp_request_non_data_await_h2d_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + SCI_SUCCESS); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE); break; default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + scic_sds_request_set_status(sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state( - &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } @@ -1613,55 +1500,38 @@ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( return status; } -/** - * - * @sci_req: - * @completion_code: - * - * enum sci_status - */ -static enum sci_status scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status stp_request_pio_await_h2d_completion_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { enum sci_status status = SCI_SUCCESS; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); break; default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + scic_sds_request_set_status(sci_req, + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } return status; } -static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler( - - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { enum sci_status status = SCI_SUCCESS; bool all_frames_transferred = false; @@ -1695,7 +1565,6 @@ static enum sci_status scic_sds_stp_request_pio_data_out_await_data_transmit_com ); } break; - default: /* * All other completion status cause the IO to be complete. If a NAK @@ -2209,12 +2078,8 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r } } - - - -static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { enum sci_status status = SCI_SUCCESS; @@ -2226,9 +2091,10 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): - /* - * We must check ther response buffer to see if the D2H Register FIS was - * received before we got the TC completion. */ + /* We must check ther response buffer to see if the D2H + * Register FIS was received before we got the TC + * completion. + */ if (sci_req->stp.rsp.fis_type == FIS_REGD2H) { scic_sds_remote_device_suspend(sci_req->target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); @@ -2237,18 +2103,22 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); } else { - /* - * If we have an error completion status for the TC then we can expect a - * D2H register FIS from the device so we must change state to wait for it */ + /* If we have an error completion status for the + * TC then we can expect a D2H register FIS from + * the device so we must change state to wait + * for it + */ sci_base_state_machine_change_state(&sci_req->state_machine, SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE); } break; - /* - * / @todo Check to see if any of these completion status need to wait for - * / the device to host register fis. */ - /* / @todo We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR - this comes only for B0 */ + /* TODO Check to see if any of these completion status need to + * wait for the device to host register fis. + */ + /* TODO We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR + * - this comes only for B0 + */ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): @@ -2268,61 +2138,35 @@ static enum sci_status scic_sds_stp_request_udma_await_tc_completion_tc_completi return status; } -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status stp_request_soft_reset_await_h2d_asserted_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status( - sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS - ); + scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + SCI_SUCCESS); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE - ); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE); break; default: /* * All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, + scic_sds_request_set_status(sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state( - &sci_req->state_machine, SCI_BASE_REQUEST_STATE_COMPLETED); + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_COMPLETED); break; } return SCI_SUCCESS; } -/** - * - * @sci_req: - * @completion_code: - * - * This method processes a TC completion. The expected TC completion is for - * the transmission of the H2D register FIS containing the SATA/STP non-data - * request. This method always successfully processes the TC completion. - * SCI_SUCCESS This value is always returned. - */ -static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler( +static enum sci_status stp_request_soft_reset_await_h2d_diagnostic_tc_event( struct scic_sds_request *sci_req, u32 completion_code) { @@ -2336,70 +2180,89 @@ static enum sci_status scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_c break; default: - /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ - scic_sds_request_set_status( - sci_req, + /* All other completion status cause the IO to be complete. If + * a NAK was received, then it is up to the user to retry the + * request. + */ + scic_sds_request_set_status(sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + SCI_BASE_REQUEST_STATE_COMPLETED); break; } return SCI_SUCCESS; } +enum sci_status +scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, u32 completion_code) +{ + enum sci_base_request_states state; + struct scic_sds_controller *scic = sci_req->owning_controller; + + state = sci_req->state_machine.current_state_id; + + switch (state) { + case SCI_BASE_REQUEST_STATE_STARTED: + return request_started_state_tc_event(sci_req, completion_code); + case SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION: + return ssp_task_request_await_tc_event(sci_req, completion_code); + case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE: + return smp_request_await_response_tc_event(sci_req, completion_code); + case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION: + return smp_request_await_tc_event(sci_req, completion_code); + case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE: + return stp_request_udma_await_tc_event(sci_req, completion_code); + case SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE: + return stp_request_non_data_await_h2d_tc_event(sci_req, completion_code); + case SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE: + return stp_request_pio_await_h2d_completion_tc_event(sci_req, completion_code); + case SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE: + return pio_data_out_tx_done_tc_event(sci_req, completion_code); + case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE: + return stp_request_soft_reset_await_h2d_asserted_tc_event(sci_req, completion_code); + case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE: + return stp_request_soft_reset_await_h2d_diagnostic_tc_event(sci_req, completion_code); + case SCI_BASE_REQUEST_STATE_ABORTING: + return request_aborting_state_tc_event(sci_req, completion_code); + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC IO Request given task completion notification %x " + "while in wrong state %d\n", __func__, completion_code, + state); + return SCI_FAILURE_INVALID_STATE; + } +} + + + static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { [SCI_BASE_REQUEST_STATE_INITIAL] = {}, [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = {}, - [SCI_BASE_REQUEST_STATE_STARTED] = { - .tc_completion_handler = scic_sds_request_started_state_tc_completion_handler, - }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .tc_completion_handler = scic_sds_ssp_task_request_await_tc_completion_tc_completion_handler, - }, + [SCI_BASE_REQUEST_STATE_STARTED] = { }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { }, [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .tc_completion_handler = scic_sds_smp_request_await_response_tc_completion_handler, - }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .tc_completion_handler = scic_sds_smp_request_await_tc_completion_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .tc_completion_handler = scic_sds_stp_request_udma_await_tc_completion_tc_completion_handler, - }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .tc_completion_handler = scic_sds_stp_request_non_data_await_h2d_tc_completion_handler, - }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { - .tc_completion_handler = scic_sds_stp_request_pio_await_h2d_completion_tc_completion_handler, - }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .tc_completion_handler = scic_sds_stp_request_pio_data_out_await_data_transmit_completion_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { - .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_asserted_tc_completion_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { - .tc_completion_handler = scic_sds_stp_request_soft_reset_await_h2d_diagnostic_tc_completion_handler, - }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .complete_handler = scic_sds_request_completed_state_complete_handler, }, - [SCI_BASE_REQUEST_STATE_ABORTING] = { - .tc_completion_handler = scic_sds_request_aborting_state_tc_completion_handler, - }, + [SCI_BASE_REQUEST_STATE_ABORTING] = { }, [SCI_BASE_REQUEST_STATE_FINAL] = { }, }; diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index c9070e7..e13ca3f 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -426,8 +426,6 @@ typedef enum sci_status (*scic_sds_io_request_handler_t) (struct scic_sds_request *request); typedef enum sci_status (*scic_sds_io_request_event_handler_t) (struct scic_sds_request *req, u32 event); -typedef enum sci_status (*scic_sds_io_request_task_completion_handler_t) - (struct scic_sds_request *req, u32 completion_code); /** * struct scic_sds_io_request_state_handler - This is the SDS core definition @@ -442,7 +440,6 @@ struct scic_sds_io_request_state_handler { */ scic_sds_io_request_handler_t complete_handler; - scic_sds_io_request_task_completion_handler_t tc_completion_handler; scic_sds_io_request_event_handler_t event_handler; }; -- cgit v0.10.2 From 79e2b6b27699c916e3c7cda18a26d47fea6017fb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 11 May 2011 08:29:56 -0700 Subject: isci: remove the completion and event state handlers With these handlers gone the rest of the state handler infrastructure is removed. Added some WARN_ONCEs where previously we would cause NULL pointer dereferences or silently run handlers from a previous state. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index cb13b78..c63064e 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -890,21 +890,62 @@ scic_sds_io_request_terminate(struct scic_sds_request *sci_req) return SCI_FAILURE_INVALID_STATE; } -enum sci_status scic_sds_io_request_event_handler( - struct scic_sds_request *request, - u32 event_code) +enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req) { - if (request->state_handlers->event_handler) - return request->state_handlers->event_handler(request, event_code); + enum sci_base_request_states state; + struct scic_sds_controller *scic = sci_req->owning_controller; + + state = sci_req->state_machine.current_state_id; + if (WARN_ONCE(state != SCI_BASE_REQUEST_STATE_COMPLETED, + "isci: request completion from wrong state (%d)\n", state)) + return SCI_FAILURE_INVALID_STATE; - dev_warn(scic_to_dev(request->owning_controller), - "%s: SCIC IO Request given event code notification %x while " - "in wrong state %d\n", - __func__, - event_code, - sci_base_state_machine_get_state(&request->state_machine)); + if (!sci_req->was_tag_assigned_by_user) + scic_controller_free_io_tag(scic, sci_req->io_tag); - return SCI_FAILURE_INVALID_STATE; + if (sci_req->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) + scic_sds_controller_release_frame(scic, + sci_req->saved_rx_frame_index); + + /* XXX can we just stop the machine and remove the 'final' state? */ + sci_base_state_machine_change_state(&sci_req->state_machine, + SCI_BASE_REQUEST_STATE_FINAL); + return SCI_SUCCESS; +} + +enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, + u32 event_code) +{ + enum sci_base_request_states state; + struct scic_sds_controller *scic = sci_req->owning_controller; + + state = sci_req->state_machine.current_state_id; + + if (state != SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE) { + dev_warn(scic_to_dev(scic), "%s: (%x) in wrong state %d\n", + __func__, event_code, state); + + return SCI_FAILURE_INVALID_STATE; + } + + switch (scu_get_event_specifier(event_code)) { + case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: + /* We are waiting for data and the SCU has R_ERR the data frame. + * Go back to waiting for the D2H Register FIS + */ + sci_base_state_machine_change_state(&sci_req->state_machine, + SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + return SCI_SUCCESS; + default: + dev_err(scic_to_dev(scic), + "%s: pio request unexpected event %#x\n", + __func__, event_code); + + /* TODO Should we fail the PIO request when we get an + * unexpected event? + */ + return SCI_FAILURE; + } } /* @@ -1080,34 +1121,8 @@ static enum sci_status request_started_state_tc_event(struct scic_sds_request *s return SCI_SUCCESS; } -/* - * This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T - * object receives a scic_sds_request_complete() request. This method frees up - * any io request resources that have been allocated and transitions the - * request to its final state. Consider stopping the state machine instead of - * transitioning to the final state? enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_request_completed_state_complete_handler( - struct scic_sds_request *request) -{ - if (request->was_tag_assigned_by_user != true) { - scic_controller_free_io_tag( - request->owning_controller, request->io_tag); - } - - if (request->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) { - scic_sds_controller_release_frame( - request->owning_controller, request->saved_rx_frame_index); - } - - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_FINAL); - return SCI_SUCCESS; -} - -static enum sci_status request_aborting_state_tc_event( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status request_aborting_state_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): @@ -1585,48 +1600,6 @@ static enum sci_status pio_data_out_tx_done_tc_event(struct scic_sds_request *sc return status; } -/** - * - * @request: This is the request which is receiving the event. - * @event_code: This is the event code that the request on which the request is - * expected to take action. - * - * This method will handle any link layer events while waiting for the data - * frame. enum sci_status SCI_SUCCESS SCI_FAILURE - */ -static enum sci_status scic_sds_stp_request_pio_data_in_await_data_event_handler( - struct scic_sds_request *request, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_specifier(event_code)) { - case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: - /* - * We are waiting for data and the SCU has R_ERR the data frame. - * Go back to waiting for the D2H Register FIS */ - sci_base_state_machine_change_state( - &request->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); - - status = SCI_SUCCESS; - break; - - default: - dev_err(scic_to_dev(request->owning_controller), - "%s: SCIC PIO Request 0x%p received unexpected " - "event 0x%08x\n", - __func__, request, event_code); - - /* / @todo Should we fail the PIO request when we get an unexpected event? */ - status = SCI_FAILURE; - break; - } - - return status; -} - static void scic_sds_stp_request_udma_complete_request( struct scic_sds_request *request, u32 scu_status, @@ -2236,37 +2209,6 @@ scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, u32 completi } } - - -static const struct scic_sds_io_request_state_handler scic_sds_request_state_handler_table[] = { - [SCI_BASE_REQUEST_STATE_INITIAL] = {}, - [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = {}, - [SCI_BASE_REQUEST_STATE_STARTED] = { }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .event_handler = scic_sds_stp_request_pio_data_in_await_data_event_handler, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { }, - [SCI_BASE_REQUEST_STATE_COMPLETED] = { - .complete_handler = scic_sds_request_completed_state_complete_handler, - }, - [SCI_BASE_REQUEST_STATE_ABORTING] = { }, - [SCI_BASE_REQUEST_STATE_FINAL] = { }, -}; - - /** * isci_request_process_response_iu() - This function sets the status and * response iu, in the task struct, from the request object for the upper @@ -2958,46 +2900,6 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, isci_host_can_dequeue(isci_host, 1); } -/** - * scic_sds_request_initial_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_INITIAL state. This state is entered when the initial - * base request is constructed. Entry into the initial state sets all handlers - * for the io request object to their default handlers. none - */ -static void scic_sds_request_initial_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_INITIAL - ); -} - -/** - * scic_sds_request_constructed_state_enter() - - * @object: The io request object that is to enter the constructed state. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_CONSTRUCTED state. The method sets the state handlers - * for the the constructed state. none - */ -static void scic_sds_request_constructed_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_CONSTRUCTED - ); -} - static void scic_sds_request_started_state_enter(void *object) { struct scic_sds_request *sci_req = object; @@ -3011,12 +2913,6 @@ static void scic_sds_request_started_state_enter(void *object) */ task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL; - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_STARTED - ); - /* all unaccelerated request types (non ssp or ncq) handled with * substates */ @@ -3046,30 +2942,13 @@ static void scic_sds_request_started_state_enter(void *object) } } -/** - * scic_sds_request_completed_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST - * object. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_COMPLETED state. This state is entered when the - * SCIC_SDS_IO_REQUEST has completed. The method will decode the request - * completion status and convert it to an enum sci_status to return in the - * completion callback function. none - */ static void scic_sds_request_completed_state_enter(void *object) { struct scic_sds_request *sci_req = object; - struct scic_sds_controller *scic = - scic_sds_request_get_controller(sci_req); + struct scic_sds_controller *scic = sci_req->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_request *ireq = sci_req_to_ireq(sci_req); - SET_STATE_HANDLER(sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_COMPLETED); - /* Tell the SCI_USER that the IO request is complete */ if (sci_req->is_task_management_request == false) isci_request_io_request_complete(ihost, ireq, @@ -3078,93 +2957,12 @@ static void scic_sds_request_completed_state_enter(void *object) isci_task_request_complete(ihost, ireq, sci_req->sci_status); } -/** - * scic_sds_request_aborting_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This object is cast into a SCIC_SDS_IO_REQUEST - * object. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_ABORTING state. none - */ static void scic_sds_request_aborting_state_enter(void *object) { struct scic_sds_request *sci_req = object; /* Setting the abort bit in the Task Context is required by the silicon. */ sci_req->task_context_buffer->abort = 1; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_ABORTING - ); -} - -/** - * scic_sds_request_final_state_enter() - - * @object: This parameter specifies the base object for which the state - * transition is occurring. This is cast into a SCIC_SDS_IO_REQUEST object. - * - * This method implements the actions taken when entering the - * SCI_BASE_REQUEST_STATE_FINAL state. The only action required is to put the - * state handlers in place. none - */ -static void scic_sds_request_final_state_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCI_BASE_REQUEST_STATE_FINAL - ); -} - -static void scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION - ); -} - -static void scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE - ); -} - -static void scic_sds_smp_request_started_await_response_substate_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE - ); -} - -static void scic_sds_smp_request_started_await_tc_completion_substate_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION - ); } static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( @@ -3172,133 +2970,27 @@ static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( { struct scic_sds_request *sci_req = object; - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req - ); -} - -static void scic_sds_stp_request_started_non_data_await_d2h_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE - ); -} - - - -static void scic_sds_stp_request_started_pio_await_h2d_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req); -} - -static void scic_sds_stp_request_started_pio_await_frame_enter(void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); + scic_sds_remote_device_set_working_request(sci_req->target_device, + sci_req); } -static void scic_sds_stp_request_started_pio_data_in_await_data_enter( - void *object) +static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(void *object) { struct scic_sds_request *sci_req = object; - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE - ); + scic_sds_remote_device_set_working_request(sci_req->target_device, + sci_req); } -static void scic_sds_stp_request_started_pio_data_out_transmit_data_enter( - void *object) +static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(void *object) { struct scic_sds_request *sci_req = object; - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE - ); + scic_sds_remote_device_set_working_request(sci_req->target_device, + sci_req); } - - -static void scic_sds_stp_request_started_udma_await_tc_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE - ); -} - -/** - * - * - * This state is entered when there is an TC completion failure. The hardware - * received an unexpected condition while processing the IO request and now - * will UF the D2H register FIS to complete the IO. - */ -static void scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE - ); -} - - - -static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE - ); - - scic_sds_remote_device_set_working_request( - sci_req->target_device, sci_req - ); -} - -static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter( - void *object) +static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(void *object) { struct scic_sds_request *sci_req = object; struct scu_task_context *task_context; @@ -3315,91 +3007,45 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet task_context->control_frame = 0; status = scic_controller_continue_io(sci_req); - if (status == SCI_SUCCESS) { - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE - ); - } -} - -static void scic_sds_stp_request_started_soft_reset_await_d2h_response_enter( - void *object) -{ - struct scic_sds_request *sci_req = object; - - SET_STATE_HANDLER( - sci_req, - scic_sds_request_state_handler_table, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE - ); + WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n"); } static const struct sci_base_state scic_sds_request_state_table[] = { - [SCI_BASE_REQUEST_STATE_INITIAL] = { - .enter_state = scic_sds_request_initial_state_enter, - }, - [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { - .enter_state = scic_sds_request_constructed_state_enter, - }, + [SCI_BASE_REQUEST_STATE_INITIAL] = { }, + [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { }, [SCI_BASE_REQUEST_STATE_STARTED] = { .enter_state = scic_sds_request_started_state_enter, }, [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_non_data_await_d2h_enter, - }, + [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_await_frame_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_data_in_await_data_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_pio_data_out_transmit_data_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_udma_await_tc_completion_enter, - }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_udma_await_d2h_reg_fis_enter, - }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { }, + [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { }, + [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, }, [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_d2h_response_enter, - }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { - .enter_state = scic_sds_io_request_started_task_mgmt_await_tc_completion_substate_enter, - }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { - .enter_state = scic_sds_io_request_started_task_mgmt_await_task_response_substate_enter, - }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { - .enter_state = scic_sds_smp_request_started_await_response_substate_enter, - }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { - .enter_state = scic_sds_smp_request_started_await_tc_completion_substate_enter, - }, + [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { }, + [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { }, + [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { }, [SCI_BASE_REQUEST_STATE_COMPLETED] = { .enter_state = scic_sds_request_completed_state_enter, }, [SCI_BASE_REQUEST_STATE_ABORTING] = { .enter_state = scic_sds_request_aborting_state_enter, }, - [SCI_BASE_REQUEST_STATE_FINAL] = { - .enter_state = scic_sds_request_final_state_enter, - }, + [SCI_BASE_REQUEST_STATE_FINAL] = { }, }; static void scic_sds_general_request_construct(struct scic_sds_controller *scic, diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index e13ca3f..31d6d57 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -224,13 +224,6 @@ struct scic_sds_request { u32 saved_rx_frame_index; /** - * This field specifies the current state handlers in place for this - * IO Request object. This field is updated each time the request - * changes state. - */ - const struct scic_sds_io_request_state_handler *state_handlers; - - /** * This field in the recorded device sequence for the io request. This is * recorded during the build operation and is compared in the start * operation. If the sequence is different then there was a change of @@ -422,27 +415,6 @@ enum sci_base_request_states { SCI_BASE_REQUEST_STATE_FINAL, }; -typedef enum sci_status (*scic_sds_io_request_handler_t) - (struct scic_sds_request *request); -typedef enum sci_status (*scic_sds_io_request_event_handler_t) - (struct scic_sds_request *req, u32 event); - -/** - * struct scic_sds_io_request_state_handler - This is the SDS core definition - * of the state handlers. - * - * - */ -struct scic_sds_io_request_state_handler { - /** - * The complete_handler specifies the method invoked when a user attempts to - * complete a request. - */ - scic_sds_io_request_handler_t complete_handler; - - scic_sds_io_request_event_handler_t event_handler; -}; - /** * scic_sds_request_get_controller() - * @@ -495,13 +467,6 @@ struct scic_sds_io_request_state_handler { (request)->sci_status = (sci_status_code); \ } -#define scic_sds_request_complete(a_request) \ - ((a_request)->state_handlers->complete_handler(a_request)) - - -extern enum sci_status -scic_sds_io_request_tc_completion(struct scic_sds_request *request, u32 completion_code); - /** * SCU_SGL_ZERO() - * @@ -538,6 +503,8 @@ enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_r enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, u32 frame_index); enum sci_status scic_sds_task_request_terminate(struct scic_sds_request *sci_req); +extern enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req); +extern enum sci_status scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, u32 code); /* XXX open code in caller */ static inline void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, -- cgit v0.10.2 From 4a33c525f0e94b57602abd1e43644cbf6f5418f4 Mon Sep 17 00:00:00 2001 From: Adam Gruchala Date: Tue, 10 May 2011 23:54:23 +0000 Subject: isci: merge phy substates Merged states and substates into one state machine, as we always unconditionally transitioned to the substate machine it was straightforward to enter that substate from the starting state. Reported-by: Christoph Hellwig Signed-off-by: Adam Gruchala [fixed construction, starting_state_enter, and starting check] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 2bb9f10..675eddd 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -932,6 +932,28 @@ static void scic_sds_controller_phy_timer_start(struct scic_sds_controller *scic scic->phy_startup_timer_pending = true; } +static bool is_phy_starting(struct scic_sds_phy *sci_phy) +{ + enum scic_sds_phy_states state; + + state = sci_phy->state_machine.current_state_id; + switch (state) { + case SCI_BASE_PHY_STATE_STARTING: + case SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: + case SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL: + return true; + default: + return false; + } +} + /** * scic_sds_controller_start_next_phy - start phy * @scic: controller @@ -975,7 +997,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro (sci_phy->is_in_link_training == false && state == SCI_BASE_PHY_STATE_STOPPED) || (sci_phy->is_in_link_training == true && - state == SCI_BASE_PHY_STATE_STARTING)) { + is_phy_starting(sci_phy))) { is_controller_start_complete = false; break; } diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 0f64605..e5ae676 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -271,8 +271,6 @@ static void scic_sds_phy_sata_timeout(void *phy) __func__, sci_phy); - sci_base_state_machine_stop(&sci_phy->starting_substate_machine); - sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); } @@ -546,7 +544,7 @@ static void scic_sds_phy_start_sas_link_training( &sci_phy->link_layer_registers->phy_configuration); sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, + &sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN ); @@ -565,7 +563,7 @@ static void scic_sds_phy_start_sata_link_training( struct scic_sds_phy *sci_phy) { sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, + &sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER ); @@ -590,16 +588,13 @@ static void scic_sds_phy_complete_link_training( { sci_phy->max_negotiated_speed = max_link_rate; - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, next_state); } static void scic_sds_phy_restart_starting_state( struct scic_sds_phy *sci_phy) { - /* Stop the current substate machine */ - sci_base_state_machine_stop(&sci_phy->starting_substate_machine); - /* Re-enter the base state machine starting state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); @@ -611,8 +606,6 @@ static void scic_sds_phy_restart_starting_state( static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( struct scic_sds_phy *phy) { - sci_base_state_machine_stop(&phy->starting_substate_machine); - sci_base_state_machine_change_state(&phy->state_machine, SCI_BASE_PHY_STATE_STOPPED); @@ -919,7 +912,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handl sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; /* We have received the SATA PHY notification change state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); break; @@ -1042,7 +1035,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handle switch (scu_get_event_code(event_code)) { case SCU_EVENT_SATA_PHY_DETECTED: /* Backup the state machine */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); break; @@ -1118,7 +1111,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; } sci_base_state_machine_change_state( - &sci_phy->starting_substate_machine, + &sci_phy->state_machine, state); result = SCI_SUCCESS; } else @@ -1177,7 +1170,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handle fis_frame_data); /* got IAF we can now go to the await spinup semaphore state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); result = SCI_SUCCESS; @@ -1216,7 +1209,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_po writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); return SCI_SUCCESS; @@ -1248,7 +1241,7 @@ static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_p &sci_phy->link_layer_registers->phy_configuration); /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); return SCI_SUCCESS; @@ -1312,9 +1305,156 @@ scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) return default_phy_handler(sci_phy, __func__); } +/* + * This method takes the struct scic_sds_phy from a stopped state and + * attempts to start it. - The phy state machine is transitioned to the + * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS + */ +static enum sci_status +scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) +{ + struct isci_host *ihost; + struct scic_sds_controller *scic; + + scic = scic_sds_phy_get_controller(sci_phy), + ihost = scic_to_ihost(scic); + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, + scic_sds_phy_sata_timeout); + + if (sci_phy->sata_timeout_timer) + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) +{ + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) +{ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + + return SCI_SUCCESS; +} + +static enum sci_status +scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) +{ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_RESETTING); + + return SCI_SUCCESS; +} -static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_handler_table[] = { +/** + * scic_sds_phy_ready_state_event_handler - + * @phy: This is the struct scic_sds_phy object which has received the event. + * + * This method request the struct scic_sds_phy handle the received event. The only + * event that we are interested in while in the ready state is the link failure + * event. - decoded event is a link failure - transition the struct scic_sds_phy back + * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will + * report a warning message enum sci_status SCI_SUCCESS if the event received is a + * link failure SCI_FAILURE_INVALID_STATE for any other event received. + */ +static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + enum sci_status result = SCI_FAILURE; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + result = SCI_SUCCESS; + break; + + case SCU_EVENT_BROADCAST_CHANGE: + /* Broadcast change received. Notify the port. */ + if (scic_sds_phy_get_port(sci_phy) != NULL) + scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); + else + sci_phy->bcn_received_while_port_unassigned = true; + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%sP SCIC PHY 0x%p ready state machine received " + "unexpected event_code %x\n", + __func__, sci_phy, event_code); + + result = SCI_FAILURE_INVALID_STATE; + break; + } + + return result; +} + +static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) +{ + enum sci_status result = SCI_FAILURE; + + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_HARD_RESET_TRANSMITTED: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + result = SCI_SUCCESS; + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: SCIC PHY 0x%p resetting state machine received " + "unexpected event_code %x\n", + __func__, sci_phy, event_code); + + result = SCI_FAILURE_INVALID_STATE; + break; + } + + return result; +} + +/* --------------------------------------------------------------------------- */ + +static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { + [SCI_BASE_PHY_STATE_INITIAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_STOPPED] = { + .start_handler = scic_sds_phy_stopped_state_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_STARTING] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, @@ -1404,20 +1544,36 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_starting_substate_ha .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_READY] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_ready_state_stop_handler, + .reset_handler = scic_sds_phy_ready_state_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_ready_state_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_RESETTING] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_resetting_state_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler + }, + [SCI_BASE_PHY_STATE_FINAL] = { + .start_handler = scic_sds_phy_default_start_handler, + .stop_handler = scic_sds_phy_default_stop_handler, + .reset_handler = scic_sds_phy_default_reset_handler, + .destruct_handler = scic_sds_phy_default_destroy_handler, + .frame_handler = scic_sds_phy_default_frame_handler, + .event_handler = scic_sds_phy_default_event_handler, + .consume_power_handler = scic_sds_phy_default_consume_power_handler } }; -/** - * scic_sds_phy_set_starting_substate_handlers() - - * - * This macro sets the starting substate handlers by state_id - */ -#define scic_sds_phy_set_starting_substate_handlers(phy, state_id) \ - scic_sds_phy_set_state_handlers(\ - (phy), \ - &scic_sds_phy_starting_substate_handler_table[(state_id)] \ - ) - /* * **************************************************************************** * * PHY STARTING SUBSTATE METHODS @@ -1436,11 +1592,11 @@ static void scic_sds_phy_starting_initial_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); /* This is just an temporary state go off to the starting state */ - sci_base_state_machine_change_state(&sci_phy->starting_substate_machine, + sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); } @@ -1456,7 +1612,7 @@ static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN ); } @@ -1474,7 +1630,7 @@ static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN ); } @@ -1491,7 +1647,7 @@ static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF ); } @@ -1509,7 +1665,7 @@ static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER ); @@ -1549,7 +1705,7 @@ static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER ); @@ -1589,7 +1745,7 @@ static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); @@ -1626,7 +1782,7 @@ static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); @@ -1666,7 +1822,7 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) bool continue_to_ready_state; struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers( + scic_sds_phy_set_base_state_handlers( sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); @@ -1719,7 +1875,7 @@ static void scic_sds_phy_starting_final_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_starting_substate_handlers(sci_phy, + scic_sds_phy_set_base_state_handlers(sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); /* State machine has run to completion so exit out and change @@ -1729,225 +1885,6 @@ static void scic_sds_phy_starting_final_substate_enter(void *object) SCI_BASE_PHY_STATE_READY); } -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_phy_starting_substates[] = { - [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .enter_state = scic_sds_phy_starting_initial_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, - .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, - .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .enter_state = scic_sds_phy_starting_final_substate_enter, - } -}; - -/* - * This method takes the struct scic_sds_phy from a stopped state and - * attempts to start it. - The phy state machine is transitioned to the - * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS - */ -static enum sci_status -scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) -{ - struct isci_host *ihost; - struct scic_sds_controller *scic; - - scic = scic_sds_phy_get_controller(sci_phy), - ihost = scic_to_ihost(scic); - - /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, - scic_sds_phy_sata_timeout); - - if (sci_phy->sata_timeout_timer) - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) -{ - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -static enum sci_status -scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_RESETTING); - - return SCI_SUCCESS; -} - -/** - * scic_sds_phy_ready_state_event_handler - - * @phy: This is the struct scic_sds_phy object which has received the event. - * - * This method request the struct scic_sds_phy handle the received event. The only - * event that we are interested in while in the ready state is the link failure - * event. - decoded event is a link failure - transition the struct scic_sds_phy back - * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will - * report a warning message enum sci_status SCI_SUCCESS if the event received is a - * link failure SCI_FAILURE_INVALID_STATE for any other event received. - */ -static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - enum sci_status result = SCI_FAILURE; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - result = SCI_SUCCESS; - break; - - case SCU_EVENT_BROADCAST_CHANGE: - /* Broadcast change received. Notify the port. */ - if (scic_sds_phy_get_port(sci_phy) != NULL) - scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); - else - sci_phy->bcn_received_while_port_unassigned = true; - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%sP SCIC PHY 0x%p ready state machine received " - "unexpected event_code %x\n", - __func__, sci_phy, event_code); - - result = SCI_FAILURE_INVALID_STATE; - break; - } - - return result; -} - -static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - enum sci_status result = SCI_FAILURE; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_HARD_RESET_TRANSMITTED: - /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - result = SCI_SUCCESS; - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: SCIC PHY 0x%p resetting state machine received " - "unexpected event_code %x\n", - __func__, sci_phy, event_code); - - result = SCI_FAILURE_INVALID_STATE; - break; - } - - return result; -} - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { - [SCI_BASE_PHY_STATE_INITIAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_STOPPED] = { - .start_handler = scic_sds_phy_stopped_state_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_STARTING] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_READY] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_ready_state_stop_handler, - .reset_handler = scic_sds_phy_ready_state_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_ready_state_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_RESETTING] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_resetting_state_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_FINAL] = { - .start_handler = scic_sds_phy_default_start_handler, - .stop_handler = scic_sds_phy_default_stop_handler, - .reset_handler = scic_sds_phy_default_reset_handler, - .destruct_handler = scic_sds_phy_default_destroy_handler, - .frame_handler = scic_sds_phy_default_frame_handler, - .event_handler = scic_sds_phy_default_event_handler, - .consume_power_handler = scic_sds_phy_default_consume_power_handler - } -}; - /* * **************************************************************************** * * PHY STATE PRIVATE METHODS @@ -2118,9 +2055,6 @@ static void scic_sds_phy_starting_state_enter(void *object) sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; sci_phy->bcn_received_while_port_unassigned = false; - /* Change over to the starting substate machine to continue */ - sci_base_state_machine_start(&sci_phy->starting_substate_machine); - if (sci_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY) { scic_sds_controller_link_down( @@ -2129,6 +2063,9 @@ static void scic_sds_phy_starting_state_enter(void *object) sci_phy ); } + + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); } /** @@ -2231,6 +2168,41 @@ static const struct sci_base_state scic_sds_phy_state_table[] = { [SCI_BASE_PHY_STATE_STARTING] = { .enter_state = scic_sds_phy_starting_state_enter, }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { + .enter_state = scic_sds_phy_starting_initial_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { + .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { + .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { + .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { + .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, + .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { + .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { + .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { + .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, + .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { + .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, + .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit + }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { + .enter_state = scic_sds_phy_starting_final_substate_enter, + }, [SCI_BASE_PHY_STATE_READY] = { .enter_state = scic_sds_phy_ready_state_enter, .exit_state = scic_sds_phy_ready_state_exit, @@ -2261,12 +2233,6 @@ void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, sci_phy->link_layer_registers = NULL; sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; sci_phy->sata_timeout_timer = NULL; - - /* Initialize the the substate machines */ - sci_base_state_machine_construct(&sci_phy->starting_substate_machine, - sci_phy, - scic_sds_phy_starting_substates, - SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); } void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index f180036..bf02964 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -142,8 +142,6 @@ struct scic_sds_phy { const struct scic_sds_phy_state_handler *state_handlers; - struct sci_base_state_machine starting_substate_machine; - /** * This field is the pointer to the transport layer register for the SCU * hardware. @@ -436,34 +434,6 @@ enum scic_sds_phy_states { SCI_BASE_PHY_STATE_STARTING, /** - * This state indicates the the phy is now ready. Thus, the user - * is able to perform IO operations utilizing this phy as long as it - * is currently part of a valid port. - * This state is entered from the STARTING state. - */ - SCI_BASE_PHY_STATE_READY, - - /** - * This state indicates that the phy is in the process of being reset. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the READY state. - */ - SCI_BASE_PHY_STATE_RESETTING, - - /** - * Simply the final state for the base phy state machine. - */ - SCI_BASE_PHY_STATE_FINAL, -}; - - -/** - * enum scic_sds_phy_starting_substates - - * - * - */ -enum scic_sds_phy_starting_substates { - /** * Initial state */ SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL, @@ -512,8 +482,27 @@ enum scic_sds_phy_starting_substates { * Exit state for this state machine */ SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL, -}; + /** + * This state indicates the the phy is now ready. Thus, the user + * is able to perform IO operations utilizing this phy as long as it + * is currently part of a valid port. + * This state is entered from the STARTING state. + */ + SCI_BASE_PHY_STATE_READY, + + /** + * This state indicates that the phy is in the process of being reset. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the READY state. + */ + SCI_BASE_PHY_STATE_RESETTING, + + /** + * Simply the final state for the base phy state machine. + */ + SCI_BASE_PHY_STATE_FINAL, +}; typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *); -- cgit v0.10.2 From 966699b50c61940e06ff39fb1085bea813f9a51d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 03:44:24 -0700 Subject: isci: unify phy start handlers Implement all handlers in scic_sds_phy_start(), and kill the state handler Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index e5ae676..7cae192 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -440,16 +440,27 @@ void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, 0x0000FFFF); } -/** - * This method will attempt to start the phy object. This request is only valid - * when the phy is in the stopped state - * @sci_phy: - * - * enum sci_status - */ enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) { - return sci_phy->state_handlers->start_handler(sci_phy); + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + struct isci_host *ihost = scic_to_ihost(scic); + + if (state != SCI_BASE_PHY_STATE_STOPPED) { + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, + scic_sds_phy_sata_timeout); + + if (sci_phy->sata_timeout_timer) + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + + return SCI_SUCCESS; } /** @@ -1257,12 +1268,6 @@ static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, } static enum sci_status -scic_sds_phy_default_start_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy) { return default_phy_handler(sci_phy, __func__); @@ -1305,31 +1310,6 @@ scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) return default_phy_handler(sci_phy, __func__); } -/* - * This method takes the struct scic_sds_phy from a stopped state and - * attempts to start it. - The phy state machine is transitioned to the - * SCI_BASE_PHY_STATE_STARTING. enum sci_status SCI_SUCCESS - */ -static enum sci_status -scic_sds_phy_stopped_state_start_handler(struct scic_sds_phy *sci_phy) -{ - struct isci_host *ihost; - struct scic_sds_controller *scic; - - scic = scic_sds_phy_get_controller(sci_phy), - ihost = scic_to_ihost(scic); - - /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, - scic_sds_phy_sata_timeout); - - if (sci_phy->sata_timeout_timer) - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - - return SCI_SUCCESS; -} - static enum sci_status scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) { @@ -1429,7 +1409,6 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sd static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1438,7 +1417,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STOPPED] = { - .start_handler = scic_sds_phy_stopped_state_start_handler, .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, @@ -1447,7 +1425,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STARTING] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1456,7 +1433,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1465,7 +1441,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1474,7 +1449,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1483,7 +1457,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1492,7 +1465,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1501,7 +1473,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1510,7 +1481,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1519,7 +1489,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1528,7 +1497,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1537,7 +1505,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1546,7 +1513,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_READY] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_ready_state_stop_handler, .reset_handler = scic_sds_phy_ready_state_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1555,7 +1521,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_RESETTING] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, @@ -1564,7 +1529,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_FINAL] = { - .start_handler = scic_sds_phy_default_start_handler, .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index bf02964..9b7d54e 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -512,12 +512,6 @@ typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); struct scic_sds_phy_state_handler { /** - * The start_handler specifies the method invoked when there is an - * attempt to start a phy. - */ - scic_sds_phy_handler_t start_handler; - - /** * The stop_handler specifies the method invoked when there is an * attempt to stop a phy. */ -- cgit v0.10.2 From 931532364e7966f61683bdf40fa1698d6707f523 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 04:01:03 -0700 Subject: isci: unify phy stop handlers Merge all implementations in scic_sds_phy_stop(), and kill the state handler Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 7cae192..cf8f2e9 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -463,16 +463,31 @@ enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) return SCI_SUCCESS; } -/** - * This method will attempt to stop the phy object. - * @sci_phy: - * - * enum sci_status SCI_SUCCESS if the phy is going to stop SCI_INVALID_STATE - * if the phy is not in a valid state to stop - */ enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) { - return sci_phy->state_handlers->stop_handler(sci_phy); + enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + + switch (state) { + case SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN: + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: + case SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL: + case SCI_BASE_PHY_STATE_READY: + break; + default: + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STOPPED); + return SCI_SUCCESS; } /** @@ -611,23 +626,6 @@ static void scic_sds_phy_restart_starting_state( SCI_BASE_PHY_STATE_STARTING); } -/* **************************************************************************** - * SCIC SDS PHY general handlers - ************************************************************************** */ -static enum sci_status scic_sds_phy_starting_substate_general_stop_handler( - struct scic_sds_phy *phy) -{ - sci_base_state_machine_change_state(&phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY EVENT_HANDLERS - * ***************************************************************************** */ - /** * * @phy: This struct scic_sds_phy object which has received an event. @@ -1268,12 +1266,6 @@ static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, } static enum sci_status -scic_sds_phy_default_stop_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy) { return default_phy_handler(sci_phy, __func__); @@ -1317,15 +1309,6 @@ scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) } static enum sci_status -scic_sds_phy_ready_state_stop_handler(struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); - - return SCI_SUCCESS; -} - -static enum sci_status scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) { sci_base_state_machine_change_state(&sci_phy->state_machine, @@ -1409,7 +1392,6 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sd static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { - .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1417,7 +1399,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STOPPED] = { - .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1425,7 +1406,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STARTING] = { - .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1433,7 +1413,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1441,7 +1420,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1449,7 +1427,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1457,7 +1434,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, @@ -1465,7 +1441,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1473,7 +1448,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1481,7 +1455,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1489,7 +1462,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1497,7 +1469,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, @@ -1505,7 +1476,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .stop_handler = scic_sds_phy_starting_substate_general_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1513,7 +1483,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_READY] = { - .stop_handler = scic_sds_phy_ready_state_stop_handler, .reset_handler = scic_sds_phy_ready_state_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1521,7 +1490,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_RESETTING] = { - .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, @@ -1529,7 +1497,6 @@ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[ .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_FINAL] = { - .stop_handler = scic_sds_phy_default_stop_handler, .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 9b7d54e..d829e15 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -512,12 +512,6 @@ typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); struct scic_sds_phy_state_handler { /** - * The stop_handler specifies the method invoked when there is an - * attempt to stop a phy. - */ - scic_sds_phy_handler_t stop_handler; - - /** * The reset_handler specifies the method invoked when there is an * attempt to reset a phy. */ -- cgit v0.10.2 From 0cf36fa9f1197e669ac6f5efc51d0587bcc95e6e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 04:02:07 -0700 Subject: isci: unify phy reset handlers Unify the implementations in scic_sds_phy_reset(), and kill the state handler Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index cf8f2e9..b606e2f 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -490,17 +490,19 @@ enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) return SCI_SUCCESS; } -/** - * This method will attempt to reset the phy. This request is only valid when - * the phy is in an ready state - * @sci_phy: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_reset( - struct scic_sds_phy *sci_phy) +enum sci_status scic_sds_phy_reset(struct scic_sds_phy *sci_phy) { - return sci_phy->state_handlers->reset_handler(sci_phy); + enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + + if (state != SCI_BASE_PHY_STATE_READY) { + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_RESETTING); + return SCI_SUCCESS; } /** @@ -1266,12 +1268,6 @@ static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, } static enum sci_status -scic_sds_phy_default_reset_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy) { return default_phy_handler(sci_phy, __func__); @@ -1308,15 +1304,6 @@ scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) return SCI_SUCCESS; } -static enum sci_status -scic_sds_phy_ready_state_reset_handler(struct scic_sds_phy *sci_phy) -{ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_RESETTING); - - return SCI_SUCCESS; -} - /** * scic_sds_phy_ready_state_event_handler - * @phy: This is the struct scic_sds_phy object which has received the event. @@ -1392,112 +1379,96 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sd static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STOPPED] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STARTING] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_READY] = { - .reset_handler = scic_sds_phy_ready_state_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_ready_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_RESETTING] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_resetting_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_FINAL] = { - .reset_handler = scic_sds_phy_default_reset_handler, .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index d829e15..5647433 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -512,12 +512,6 @@ typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); struct scic_sds_phy_state_handler { /** - * The reset_handler specifies the method invoked when there is an - * attempt to reset a phy. - */ - scic_sds_phy_handler_t reset_handler; - - /** * The destruct_handler specifies the method invoked when attempting to * destruct a phy. */ -- cgit v0.10.2 From 35b317bec511b4a5f87a637bf78b6d1d635c617d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 04:10:41 -0700 Subject: isci: remove phy destruct handlers Unused infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index b606e2f..8beea40 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -1268,12 +1268,6 @@ static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, } static enum sci_status -scic_sds_phy_default_destroy_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, u32 frame_index) { @@ -1298,12 +1292,6 @@ scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) return default_phy_handler(sci_phy, __func__); } -static enum sci_status -scic_sds_phy_stopped_state_destroy_handler(struct scic_sds_phy *sci_phy) -{ - return SCI_SUCCESS; -} - /** * scic_sds_phy_ready_state_event_handler - * @phy: This is the struct scic_sds_phy object which has received the event. @@ -1379,97 +1367,81 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sd static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STOPPED] = { - .destruct_handler = scic_sds_phy_stopped_state_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STARTING] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_READY] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_ready_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_RESETTING] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_resetting_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_FINAL] = { - .destruct_handler = scic_sds_phy_default_destroy_handler, .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 5647433..24536d6 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -512,12 +512,6 @@ typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); struct scic_sds_phy_state_handler { /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a phy. - */ - scic_sds_phy_handler_t destruct_handler; - - /** * The state handler for unsolicited frames received from the SCU hardware. */ scic_sds_phy_frame_handler_t frame_handler; -- cgit v0.10.2 From c4441abc25a33ab259f01dce4b4d63721013f86d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 04:17:51 -0700 Subject: isci: unify phy frame handlers Unify the implementations in scic_sds_phy_frame_handler(), and kill the state handler Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 8beea40..433ea60 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -519,18 +519,100 @@ enum sci_status scic_sds_phy_event_handler( return sci_phy->state_handlers->event_handler(sci_phy, event_code); } -/** - * This method will process the frame index received. - * @sci_phy: - * @frame_index: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_frame_handler( - struct scic_sds_phy *sci_phy, - u32 frame_index) +enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, + u32 frame_index) { - return sci_phy->state_handlers->frame_handler(sci_phy, frame_index); + enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + enum sci_status result; + + switch (state) { + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF: { + u32 *frame_words; + struct sas_identify_frame iaf; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + result = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_words); + + if (result != SCI_SUCCESS) + return result; + + sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); + if (iaf.frame_type == 0) { + u32 state; + + memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); + if (iaf.smp_tport) { + /* We got the IAF for an expander PHY go to the final + * state since there are no power requirements for + * expander phys. + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; + } else { + /* We got the IAF we can now go to the await spinup + * semaphore state + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; + } + sci_base_state_machine_change_state(&sci_phy->state_machine, + state); + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, frame_index); + + scic_sds_controller_release_frame(scic, frame_index); + return result; + } + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: { + struct dev_to_host_fis *frame_header; + u32 *fis_frame_data; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_phy_get_controller(sci_phy)->uf_control), + frame_index, + (void **)&frame_header); + + if (result != SCI_SUCCESS) + return result; + + if ((frame_header->fis_type == FIS_REGD2H) && + !(frame_header->status & ATA_BUSY)) { + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&fis_frame_data); + + scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, + frame_header, + fis_frame_data); + + /* got IAF we can now go to the await spinup semaphore state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, frame_index); + + /* Regardless of the result we are done with this frame with it */ + scic_sds_controller_release_frame(scic, frame_index); + + return result; + } + default: + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + } /** @@ -1069,141 +1151,6 @@ static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handle return result; } - -/* - * ***************************************************************************** - * * SCIC SDS PHY FRAME_HANDLERS - * ***************************************************************************** */ - -/** - * - * @phy: This is struct scic_sds_phy object which is being requested to decode the - * frame data. - * @frame_index: This is the index of the unsolicited frame which was received - * for this phy. - * - * This method decodes the unsolicited frame when the struct scic_sds_phy is in the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Get the UF Header - If the UF - * is an IAF - Copy IAF data to local phy object IAF data buffer. - Change - * starting substate to wait power. - else - log warning message of unexpected - * unsolicted frame - release frame buffer enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_frame_handler( - struct scic_sds_phy *sci_phy, u32 frame_index) -{ - enum sci_status result; - u32 *frame_words; - struct sas_identify_frame iaf; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&frame_words); - - if (result != SCI_SUCCESS) - return result; - - sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); - if (iaf.frame_type == 0) { - u32 state; - - memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); - if (iaf.smp_tport) { - /* We got the IAF for an expander PHY go to the final - * state since there are no power requirements for - * expander phys. - */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; - } else { - /* We got the IAF we can now go to the await spinup - * semaphore state - */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; - } - sci_base_state_machine_change_state( - &sci_phy->state_machine, - state); - result = SCI_SUCCESS; - } else - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected frame id %x\n", - __func__, - frame_index); - - scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), - frame_index); - - return result; -} - -/** - * - * @phy: This is struct scic_sds_phy object which is being requested to decode the - * frame data. - * @frame_index: This is the index of the unsolicited frame which was received - * for this phy. - * - * This method decodes the unsolicited frame when the struct scic_sds_phy is in the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Get the UF Header - If - * the UF is an SIGNATURE FIS - Copy IAF data to local phy object SIGNATURE FIS - * data buffer. - else - log warning message of unexpected unsolicted frame - - * release frame buffer enum sci_status SCI_SUCCESS Must decode the SIGNATURE FIS - * data - */ -static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_frame_handler( - struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - enum sci_status result; - struct dev_to_host_fis *frame_header; - u32 *fis_frame_data; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&frame_header); - - if (result != SCI_SUCCESS) - return result; - - if ((frame_header->fis_type == FIS_REGD2H) && - !(frame_header->status & ATA_BUSY)) { - scic_sds_unsolicited_frame_control_get_buffer( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&fis_frame_data); - - scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, - frame_header, - fis_frame_data); - - /* got IAF we can now go to the await spinup semaphore state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - result = SCI_SUCCESS; - } else - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected frame id %x\n", - __func__, - frame_index); - - /* Regardless of the result we are done with this frame with it */ - scic_sds_controller_release_frame(scic_sds_phy_get_controller(sci_phy), - frame_index); - - return result; -} - -/* - * ***************************************************************************** - * * SCIC SDS PHY POWER_HANDLERS - * ***************************************************************************** */ - /* * This method is called by the struct scic_sds_controller when the phy object is * granted power. - The notify enable spinups are turned on for this phy object @@ -1268,18 +1215,6 @@ static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, } static enum sci_status -scic_sds_phy_default_frame_handler(struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - - default_phy_handler(sci_phy, __func__); - scic_sds_controller_release_frame(scic, frame_index); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, u32 event_code) { @@ -1367,82 +1302,66 @@ static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sd static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STOPPED] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STARTING] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .frame_handler = scic_sds_phy_starting_substate_await_iaf_uf_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .frame_handler = scic_sds_phy_starting_substate_await_sig_fis_frame_handler, .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_READY] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_ready_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_RESETTING] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_resetting_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_FINAL] = { - .frame_handler = scic_sds_phy_default_frame_handler, .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler } diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 24536d6..e7f4b71 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -512,11 +512,6 @@ typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); struct scic_sds_phy_state_handler { /** - * The state handler for unsolicited frames received from the SCU hardware. - */ - scic_sds_phy_frame_handler_t frame_handler; - - /** * The state handler for events received from the SCU hardware. */ scic_sds_phy_event_handler_t event_handler; -- cgit v0.10.2 From 23506a69e2ee761824c266f6e2cd541a7287c2a5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 04:27:29 -0700 Subject: isci: unify phy event handlers Unify the implementations in scic_sds_phy_event_handler(), and kill the state handler Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 433ea60..0ffb5d5 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -506,116 +506,6 @@ enum sci_status scic_sds_phy_reset(struct scic_sds_phy *sci_phy) } /** - * This method will process the event code received. - * @sci_phy: - * @event_code: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - return sci_phy->state_handlers->event_handler(sci_phy, event_code); -} - -enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, - u32 frame_index) -{ - enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; - enum sci_status result; - - switch (state) { - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF: { - u32 *frame_words; - struct sas_identify_frame iaf; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - result = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, - frame_index, - (void **)&frame_words); - - if (result != SCI_SUCCESS) - return result; - - sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); - if (iaf.frame_type == 0) { - u32 state; - - memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); - if (iaf.smp_tport) { - /* We got the IAF for an expander PHY go to the final - * state since there are no power requirements for - * expander phys. - */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; - } else { - /* We got the IAF we can now go to the await spinup - * semaphore state - */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; - } - sci_base_state_machine_change_state(&sci_phy->state_machine, - state); - result = SCI_SUCCESS; - } else - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected frame id %x\n", - __func__, frame_index); - - scic_sds_controller_release_frame(scic, frame_index); - return result; - } - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: { - struct dev_to_host_fis *frame_header; - u32 *fis_frame_data; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), - frame_index, - (void **)&frame_header); - - if (result != SCI_SUCCESS) - return result; - - if ((frame_header->fis_type == FIS_REGD2H) && - !(frame_header->status & ATA_BUSY)) { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, - frame_index, - (void **)&fis_frame_data); - - scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, - frame_header, - fis_frame_data); - - /* got IAF we can now go to the await spinup semaphore state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - result = SCI_SUCCESS; - } else - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected frame id %x\n", - __func__, frame_index); - - /* Regardless of the result we are done with this frame with it */ - scic_sds_controller_release_frame(scic, frame_index); - - return result; - } - default: - dev_dbg(sciphy_to_dev(sci_phy), - "%s: in wrong state: %d\n", __func__, state); - return SCI_FAILURE_INVALID_STATE; - } - -} - -/** * This method will give the phy permission to consume power * @sci_phy: * @@ -702,455 +592,6 @@ static void scic_sds_phy_complete_link_training( next_state); } -static void scic_sds_phy_restart_starting_state( - struct scic_sds_phy *sci_phy) -{ - /* Re-enter the base state machine starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - - * decode the event - sas phy detected causes a state transition to the wait - * for speed event notification. - any other events log a warning message and - * set a failure status enum sci_status SCI_SUCCESS on any valid event notification - * SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_ossp_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - scic_sds_phy_start_sas_link_training(sci_phy); - sci_phy->is_in_link_training = true; - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - scic_sds_phy_start_sata_link_training(sci_phy); - sci_phy->is_in_link_training = true; - break; - - default: - dev_dbg(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - - * decode the event - sas phy detected returns us back to this state. - speed - * event detected causes a state transition to the wait for iaf. - identify - * timeout is an un-expected event and the state machine is restarted. - link - * failure events restart the starting state machine - any other events log a - * warning message and set a failure status enum sci_status SCI_SUCCESS on any valid - * event notification SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * Why is this being reported again by the controller? - * We would re-enter this state so just stay here */ - break; - - case SCU_EVENT_SAS_15: - case SCU_EVENT_SAS_15_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SAS_30: - case SCU_EVENT_SAS_30_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SAS_60: - case SCU_EVENT_SAS_60_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* - * We were doing SAS PHY link training and received a SATA PHY event - * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(sci_phy); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - - * decode the event - sas phy detected event backs up the state machine to the - * await speed notification. - identify timeout is an un-expected event and the - * state machine is restarted. - link failure events restart the starting state - * machine - any other events log a warning message and set a failure status - * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any - * unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_iaf_uf_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SAS_PHY_DETECTED: - /* Backup the state machine */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* - * We were doing SAS PHY link training and received a SATA PHY event - * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(sci_phy); - break; - - case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: - case SCU_EVENT_LINK_FAILURE: - case SCU_EVENT_HARD_RESET_RECEIVED: - /* Start the oob/sn state machine over again */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_POWER. - - * decode the event - link failure events restart the starting state machine - - * any other events log a warning message and set a failure status enum sci_status - * SCI_SUCCESS on a link failure event SCI_FAILURE on any unexpected event - * notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_power_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received unexpected " - "event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - - * decode the event - link failure events restart the starting state machine - - * sata spinup hold events are ignored since they are expected - any other - * events log a warning message and set a failure status enum sci_status SCI_SUCCESS - * on a link failure event SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_power_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* These events are received every 10ms and are expected while in this state */ - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * scic_sds_phy_starting_substate_await_sata_phy_event_handler - - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - - * decode the event - link failure events restart the starting state machine - - * sata spinup hold events are ignored since they are expected - sata phy - * detected event change to the wait speed event - any other events log a - * warning message and set a failure status enum sci_status SCI_SUCCESS on a link - * failure event SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_phy_event_handler( - struct scic_sds_phy *sci_phy, u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SATA_SPINUP_HOLD: - /* These events might be received since we dont know how many may be in - * the completion queue while waiting for power - */ - break; - - case SCU_EVENT_SATA_PHY_DETECTED: - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; - - /* We have received the SATA PHY notification change state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. - */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - * - decode the event - sata phy detected returns us back to this state. - - * speed event detected causes a state transition to the wait for signature. - - * link failure events restart the starting state machine - any other events - * log a warning message and set a failure status enum sci_status SCI_SUCCESS on any - * valid event notification SCI_FAILURE on any unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_speed_event_handler( - struct scic_sds_phy *sci_phy, - u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SATA_PHY_DETECTED: - /* - * The hardware reports multiple SATA PHY detected events - * ignore the extras */ - break; - - case SCU_EVENT_SATA_15: - case SCU_EVENT_SATA_15_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_SATA_30: - case SCU_EVENT_SATA_30_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_SATA_60: - case SCU_EVENT_SATA_60_SSC: - scic_sds_phy_complete_link_training( - sci_phy, - SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - case SCU_EVENT_SAS_PHY_DETECTED: - /* - * There has been a change in the phy type before OOB/SN for the - * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - -/** - * scic_sds_phy_starting_substate_await_sig_fis_event_handler - - * @phy: This struct scic_sds_phy object which has received an event. - * @event_code: This is the event code which the phy object is to decode. - * - * This method is called when an event notification is received for the phy - * object when in the state SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - - * decode the event - sas phy detected event backs up the state machine to the - * await speed notification. - identify timeout is an un-expected event and the - * state machine is restarted. - link failure events restart the starting state - * machine - any other events log a warning message and set a failure status - * enum sci_status SCI_SUCCESS on any valid event notification SCI_FAILURE on any - * unexpected event notifation - */ -static enum sci_status scic_sds_phy_starting_substate_await_sig_fis_event_handler( - struct scic_sds_phy *sci_phy, u32 event_code) -{ - u32 result = SCI_SUCCESS; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_SATA_PHY_DETECTED: - /* Backup the state machine */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - break; - - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - scic_sds_phy_restart_starting_state(sci_phy); - break; - - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - - result = SCI_FAILURE; - break; - } - - return result; -} - /* * This method is called by the struct scic_sds_controller when the phy object is * granted power. - The notify enable spinups are turned on for this phy object @@ -1215,154 +656,460 @@ static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, } static enum sci_status -scic_sds_phy_default_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) -{ - return default_phy_handler(sci_phy, __func__); -} - -static enum sci_status scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) { return default_phy_handler(sci_phy, __func__); } -/** - * scic_sds_phy_ready_state_event_handler - - * @phy: This is the struct scic_sds_phy object which has received the event. - * - * This method request the struct scic_sds_phy handle the received event. The only - * event that we are interested in while in the ready state is the link failure - * event. - decoded event is a link failure - transition the struct scic_sds_phy back - * to the SCI_BASE_PHY_STATE_STARTING state. - any other event received will - * report a warning message enum sci_status SCI_SUCCESS if the event received is a - * link failure SCI_FAILURE_INVALID_STATE for any other event received. - */ -static enum sci_status scic_sds_phy_ready_state_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) + +enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, + u32 event_code) { - enum sci_status result = SCI_FAILURE; + enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_LINK_FAILURE: - /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - result = SCI_SUCCESS; - break; + switch (state) { + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + scic_sds_phy_start_sas_link_training(sci_phy); + sci_phy->is_in_link_training = true; + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + scic_sds_phy_start_sata_link_training(sci_phy); + sci_phy->is_in_link_training = true; + break; + default: + dev_dbg(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * Why is this being reported again by the controller? + * We would re-enter this state so just stay here */ + break; + case SCU_EVENT_SAS_15: + case SCU_EVENT_SAS_15_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_1_5_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + case SCU_EVENT_SAS_30: + case SCU_EVENT_SAS_30_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_3_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + case SCU_EVENT_SAS_60: + case SCU_EVENT_SAS_60_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_6_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + scic_sds_phy_start_sata_link_training(sci_phy); + break; + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + + return SCI_FAILURE; + break; + } + return SCI_SUCCESS; + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* Backup the state machine */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* We were doing SAS PHY link training and received a + * SATA PHY event continue OOB/SN as if this were a + * SATA PHY + */ + scic_sds_phy_start_sata_link_training(sci_phy); + break; + case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: + case SCU_EVENT_LINK_FAILURE: + case SCU_EVENT_HARD_RESET_RECEIVED: + /* Start the oob/sn state machine over again */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received unexpected " + "event_code %x\n", + __func__, + event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events are received every 10ms and are + * expected while in this state + */ + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); - case SCU_EVENT_BROADCAST_CHANGE: - /* Broadcast change received. Notify the port. */ - if (scic_sds_phy_get_port(sci_phy) != NULL) - scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); - else - sci_phy->bcn_received_while_port_unassigned = true; - break; + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events might be received since we dont know how many may be in + * the completion queue while waiting for power + */ + break; + case SCU_EVENT_SATA_PHY_DETECTED: + sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + + /* We have received the SATA PHY notification change state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + break; + case SCU_EVENT_SAS_PHY_DETECTED: + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); - default: - dev_warn(sciphy_to_dev(sci_phy), - "%sP SCIC PHY 0x%p ready state machine received " - "unexpected event_code %x\n", - __func__, sci_phy, event_code); + return SCI_FAILURE;; + } + return SCI_SUCCESS; + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* + * The hardware reports multiple SATA PHY detected events + * ignore the extras */ + break; + case SCU_EVENT_SATA_15: + case SCU_EVENT_SATA_15_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_1_5_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_SATA_30: + case SCU_EVENT_SATA_30_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_3_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_SATA_60: + case SCU_EVENT_SATA_60_SSC: + scic_sds_phy_complete_link_training( + sci_phy, + SAS_LINK_RATE_6_0_GBPS, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + scic_sds_phy_start_sas_link_training(sci_phy); + break; + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); - result = SCI_FAILURE_INVALID_STATE; - break; - } + return SCI_FAILURE; + } + + return SCI_SUCCESS; + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* Backup the state machine */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; - return result; + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_BASE_PHY_STATE_READY: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; + case SCU_EVENT_BROADCAST_CHANGE: + /* Broadcast change received. Notify the port. */ + if (scic_sds_phy_get_port(sci_phy) != NULL) + scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); + else + sci_phy->bcn_received_while_port_unassigned = true; + break; + default: + dev_warn(sciphy_to_dev(sci_phy), + "%sP SCIC PHY 0x%p ready state machine received " + "unexpected event_code %x\n", + __func__, sci_phy, event_code); + return SCI_FAILURE_INVALID_STATE; + } + return SCI_SUCCESS; + case SCI_BASE_PHY_STATE_RESETTING: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_HARD_RESET_TRANSMITTED: + /* Link failure change state back to the starting state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); + break; + default: + dev_warn(sciphy_to_dev(sci_phy), + "%s: SCIC PHY 0x%p resetting state machine received " + "unexpected event_code %x\n", + __func__, sci_phy, event_code); + + return SCI_FAILURE_INVALID_STATE; + break; + } + return SCI_SUCCESS; + default: + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } } -static enum sci_status scic_sds_phy_resetting_state_event_handler(struct scic_sds_phy *sci_phy, - u32 event_code) +enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, + u32 frame_index) { - enum sci_status result = SCI_FAILURE; + enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + enum sci_status result; - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_HARD_RESET_TRANSMITTED: - /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - result = SCI_SUCCESS; - break; + switch (state) { + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF: { + u32 *frame_words; + struct sas_identify_frame iaf; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - default: - dev_warn(sciphy_to_dev(sci_phy), - "%s: SCIC PHY 0x%p resetting state machine received " - "unexpected event_code %x\n", - __func__, sci_phy, event_code); + result = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + frame_index, + (void **)&frame_words); - result = SCI_FAILURE_INVALID_STATE; - break; + if (result != SCI_SUCCESS) + return result; + + sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); + if (iaf.frame_type == 0) { + u32 state; + + memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); + if (iaf.smp_tport) { + /* We got the IAF for an expander PHY go to the final + * state since there are no power requirements for + * expander phys. + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; + } else { + /* We got the IAF we can now go to the await spinup + * semaphore state + */ + state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; + } + sci_base_state_machine_change_state(&sci_phy->state_machine, + state); + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, frame_index); + + scic_sds_controller_release_frame(scic, frame_index); + return result; } + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: { + struct dev_to_host_fis *frame_header; + u32 *fis_frame_data; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_phy_get_controller(sci_phy)->uf_control), + frame_index, + (void **)&frame_header); + + if (result != SCI_SUCCESS) + return result; - return result; + if ((frame_header->fis_type == FIS_REGD2H) && + !(frame_header->status & ATA_BUSY)) { + scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + frame_index, + (void **)&fis_frame_data); + + scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, + frame_header, + fis_frame_data); + + /* got IAF we can now go to the await spinup semaphore state */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(sci_phy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, frame_index); + + /* Regardless of the result we are done with this frame with it */ + scic_sds_controller_release_frame(scic, frame_index); + + return result; + } + default: + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + } + + /* --------------------------------------------------------------------------- */ static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { [SCI_BASE_PHY_STATE_INITIAL] = { - .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STOPPED] = { - .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_STARTING] = { - .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .event_handler = scic_sds_phy_starting_substate_await_ossp_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .event_handler = scic_sds_phy_starting_substate_await_sas_phy_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .event_handler = scic_sds_phy_starting_substate_await_iaf_uf_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .event_handler = scic_sds_phy_starting_substate_await_sas_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .event_handler = scic_sds_phy_starting_substate_await_sata_power_event_handler, .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .event_handler = scic_sds_phy_starting_substate_await_sata_phy_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .event_handler = scic_sds_phy_starting_substate_await_sata_speed_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .event_handler = scic_sds_phy_starting_substate_await_sig_fis_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_READY] = { - .event_handler = scic_sds_phy_ready_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_RESETTING] = { - .event_handler = scic_sds_phy_resetting_state_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler }, [SCI_BASE_PHY_STATE_FINAL] = { - .event_handler = scic_sds_phy_default_event_handler, .consume_power_handler = scic_sds_phy_default_consume_power_handler } }; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index e7f4b71..a95c74e 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -512,11 +512,6 @@ typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); struct scic_sds_phy_state_handler { /** - * The state handler for events received from the SCU hardware. - */ - scic_sds_phy_event_handler_t event_handler; - - /** * The state handler for staggered spinup. */ scic_sds_phy_power_handler_t consume_power_handler; -- cgit v0.10.2 From 5b1d4af25186f5d23dae7a538d8472dacd9486c8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 04:51:41 -0700 Subject: isci: unify phy consume_power handlers Unify the implementations in scic_sds_phy_consume_power_handler(), and kill the state handler plus infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 0ffb5d5..9a5ec37 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -505,16 +505,53 @@ enum sci_status scic_sds_phy_reset(struct scic_sds_phy *sci_phy) return SCI_SUCCESS; } -/** - * This method will give the phy permission to consume power - * @sci_phy: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_consume_power_handler( - struct scic_sds_phy *sci_phy) +enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy) { - return sci_phy->state_handlers->consume_power_handler(sci_phy); + enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + + switch (state) { + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: { + u32 enable_spinup; + + enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); + enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); + + /* Change state to the final state this substate machine has run to completion */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + + return SCI_SUCCESS; + } + case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: { + u32 scu_sas_pcfg_value; + + /* Release the spinup hold state and reset the OOB state machine */ + scu_sas_pcfg_value = + readl(&sci_phy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Now restart the OOB operation */ + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + writel(scu_sas_pcfg_value, + &sci_phy->link_layer_registers->phy_configuration); + + /* Change state to the final state this substate machine has run to completion */ + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); + + return SCI_SUCCESS; + } + default: + dev_dbg(sciphy_to_dev(sci_phy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } } /* @@ -592,76 +629,6 @@ static void scic_sds_phy_complete_link_training( next_state); } -/* - * This method is called by the struct scic_sds_controller when the phy object is - * granted power. - The notify enable spinups are turned on for this phy object - * - The phy state machine is transitioned to the - * SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_sas_power_consume_power_handler( - struct scic_sds_phy *sci_phy) -{ - u32 enable_spinup; - - enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); - enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); - writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); - - /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - - return SCI_SUCCESS; -} - -/* - * This method is called by the struct scic_sds_controller when the phy object is - * granted power. - The phy state machine is transitioned to the - * SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_phy_starting_substate_await_sata_power_consume_power_handler( - struct scic_sds_phy *sci_phy) -{ - u32 scu_sas_pcfg_value; - - /* Release the spinup hold state and reset the OOB state machine */ - scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); - scu_sas_pcfg_value &= - ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Now restart the OOB operation */ - scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); - writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); - - /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); - - return SCI_SUCCESS; -} - -static enum sci_status default_phy_handler(struct scic_sds_phy *sci_phy, - const char *func) -{ - dev_dbg(sciphy_to_dev(sci_phy), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&sci_phy->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status -scic_sds_phy_default_consume_power_handler(struct scic_sds_phy *sci_phy) -{ - return default_phy_handler(sci_phy, __func__); -} - - enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, u32 event_code) { @@ -1059,287 +1026,71 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, } - - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_phy_state_handler scic_sds_phy_state_handler_table[] = { - [SCI_BASE_PHY_STATE_INITIAL] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_STOPPED] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_STARTING] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { - .consume_power_handler = scic_sds_phy_starting_substate_await_sas_power_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { - .consume_power_handler = scic_sds_phy_starting_substate_await_sata_power_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_READY] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_RESETTING] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - }, - [SCI_BASE_PHY_STATE_FINAL] = { - .consume_power_handler = scic_sds_phy_default_consume_power_handler - } -}; - -/* - * **************************************************************************** - * * PHY STARTING SUBSTATE METHODS - * **************************************************************************** */ - -/** - * scic_sds_phy_starting_initial_substate_enter - - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL. - The initial state - * handlers are put in place for the struct scic_sds_phy object. - The state is - * changed to the wait phy type event notification. none - */ static void scic_sds_phy_starting_initial_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_base_state_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); - /* This is just an temporary state go off to the starting state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_PHY_TYPE_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_ossp_en_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SPEED_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_sas_speed_en_substate_enter( - void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ -static void scic_sds_phy_starting_await_iaf_uf_substate_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Set the - * struct scic_sds_phy object state handlers for this state. - Add this phy object to - * the power control queue none - */ static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; - scic_sds_phy_set_base_state_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER - ); - - scic_sds_controller_power_control_queue_insert( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); + scic_sds_controller_power_control_queue_insert(scic, sci_phy); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER. - Remove the - * struct scic_sds_phy object from the power control queue. none - */ static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) { struct scic_sds_phy *sci_phy = object; + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_remove( - scic_sds_phy_get_controller(sci_phy), sci_phy - ); + scic_sds_controller_power_control_queue_remove(scic, sci_phy); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Set the - * struct scic_sds_phy object state handlers for this state. - Add this phy object to - * the power control queue none - */ static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; - scic_sds_phy_set_base_state_handlers( - sci_phy, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER - ); - - scic_sds_controller_power_control_queue_insert( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); + scic_sds_controller_power_control_queue_insert(scic, sci_phy); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER. - Remove the - * struct scic_sds_phy object from the power control queue. none - */ static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) { struct scic_sds_phy *sci_phy = object; + struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_remove( - scic_sds_phy_get_controller(sci_phy), - sci_phy - ); + scic_sds_controller_power_control_queue_remove(scic, sci_phy); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_base_state_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); - isci_timer_start(sci_phy->sata_timeout_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy - * on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer - * that was started on entry to await sata phy event notification none - */ -static inline void scic_sds_phy_starting_await_sata_phy_substate_exit( - void *object) +static void scic_sds_phy_starting_await_sata_phy_substate_exit(void *object) { struct scic_sds_phy *sci_phy = object; isci_timer_stop(sci_phy->sata_timeout_timer); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - Set the - * struct scic_sds_phy object state handlers for this state. none - */ static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_base_state_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); - isci_timer_start(sci_phy->sata_timeout_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the - * struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN. - stop the timer - * that was started on entry to await sata phy event notification none - */ -static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( +static void scic_sds_phy_starting_await_sata_speed_substate_exit( void *object) { struct scic_sds_phy *sci_phy = object; @@ -1347,30 +1098,12 @@ static inline void scic_sds_phy_starting_await_sata_speed_substate_exit( isci_timer_stop(sci_phy->sata_timeout_timer); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Set the - * struct scic_sds_phy object state handlers for this state. - * - Start the SIGNATURE FIS - * timeout timer none - */ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) { - bool continue_to_ready_state; struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_base_state_handlers( - sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); - - continue_to_ready_state = scic_sds_port_link_detected( - sci_phy->owning_port, - sci_phy); + if (scic_sds_port_link_detected(sci_phy->owning_port, sci_phy)) { - if (continue_to_ready_state) { /* * Clear the PE suspend condition so we can actually * receive SIG FIS @@ -1385,39 +1118,17 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) sci_phy->is_in_link_training = false; } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the - * struct scic_sds_phy on exiting - * the SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF. - Stop the SIGNATURE - * FIS timeout timer. none - */ -static inline void scic_sds_phy_starting_await_sig_fis_uf_substate_exit( - void *object) +static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(void *object) { struct scic_sds_phy *sci_phy = object; isci_timer_stop(sci_phy->sata_timeout_timer); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL. - Set the struct scic_sds_phy - * object state handlers for this state. - Change base state machine to the - * ready state. none - */ static void scic_sds_phy_starting_final_substate_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_base_state_handlers(sci_phy, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); - /* State machine has run to completion so exit out and change * the base state machine to the ready state */ @@ -1425,11 +1136,6 @@ static void scic_sds_phy_starting_final_substate_enter(void *object) SCI_BASE_PHY_STATE_READY); } -/* - * **************************************************************************** - * * PHY STATE PRIVATE METHODS - * **************************************************************************** */ - /** * * @sci_phy: This is the struct scic_sds_phy object to stop. @@ -1511,49 +1217,17 @@ static void scu_link_layer_tx_hard_reset( &sci_phy->link_layer_registers->phy_configuration); } -/* - * **************************************************************************** - * * PHY BASE STATE METHODS - * **************************************************************************** */ - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state - * handlers for the phy object base state machine initial state. none - */ -static void scic_sds_phy_initial_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_INITIAL); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This function will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_INITIAL. - This function sets the state - * handlers for the phy object base state machine initial state. - The SCU - * hardware is requested to stop the protocol engine. none - */ static void scic_sds_phy_stopped_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); + struct scic_sds_port *sci_port = sci_phy->owning_port; + struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); /* * @todo We need to get to the controller to place this PE in a * reset state */ - - scic_sds_phy_set_base_state_handlers(sci_phy, - SCI_BASE_PHY_STATE_STOPPED); - if (sci_phy->sata_timeout_timer != NULL) { isci_del_timer(ihost, sci_phy->sata_timeout_timer); @@ -1562,32 +1236,16 @@ static void scic_sds_phy_stopped_state_enter(void *object) scu_link_layer_stop_protocol_engine(sci_phy); - if (sci_phy->state_machine.previous_state_id != - SCI_BASE_PHY_STATE_INITIAL) - scic_sds_controller_link_down( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy); + if (sci_phy->state_machine.previous_state_id != SCI_BASE_PHY_STATE_INITIAL) + scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_STARTING. - This function sets the state - * handlers for the phy object base state machine starting state. - The SCU - * hardware is requested to start OOB/SN on this protocl engine. - The phy - * starting substate machine is started. - If the previous state was the ready - * state then the struct scic_sds_controller is informed that the phy has gone link - * down. none - */ static void scic_sds_phy_starting_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_STARTING); - scu_link_layer_stop_protocol_engine(sci_phy); scu_link_layer_start_oob(sci_phy); @@ -1595,50 +1253,25 @@ static void scic_sds_phy_starting_state_enter(void *object) sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; sci_phy->bcn_received_while_port_unassigned = false; - if (sci_phy->state_machine.previous_state_id - == SCI_BASE_PHY_STATE_READY) { - scic_sds_controller_link_down( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy - ); - } + if (sci_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY) + scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy); sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_READY. - This function sets the state - * handlers for the phy object base state machine ready state. - The SCU - * hardware protocol engine is resumed. - The struct scic_sds_controller is informed - * that the phy object has gone link up. none - */ static void scic_sds_phy_ready_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_READY); + scic_sds_controller_link_up(scic_sds_phy_get_controller(sci_phy), + scic_sds_phy_get_port(sci_phy), + sci_phy); - scic_sds_controller_link_up( - scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), - sci_phy - ); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on exiting - * the SCI_BASE_PHY_STATE_INITIAL. This function suspends the SCU hardware - * protocol engine represented by this struct scic_sds_phy object. none - */ static void scic_sds_phy_ready_state_exit(void *object) { struct scic_sds_phy *sci_phy = object; @@ -1646,62 +1279,29 @@ static void scic_sds_phy_ready_state_exit(void *object) scic_sds_phy_suspend(sci_phy); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_RESETTING. - This function sets the state - * handlers for the phy object base state machine resetting state. none - */ static void scic_sds_phy_resetting_state_enter(void *object) { struct scic_sds_phy *sci_phy = object; - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_RESETTING); - - /* - * The phy is being reset, therefore deactivate it from the port. - * In the resetting state we don't notify the user regarding - * link up and link down notifications. */ + /* The phy is being reset, therefore deactivate it from the port. In + * the resetting state we don't notify the user regarding link up and + * link down notifications + */ scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false); if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { scu_link_layer_tx_hard_reset(sci_phy); } else { - /* - * The SCU does not need to have a discrete reset state so + /* The SCU does not need to have a discrete reset state so * just go back to the starting state. */ - sci_base_state_machine_change_state( - &sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); } } -/** - * - * @object: This is the object which is cast to a struct scic_sds_phy object. - * - * This method will perform the actions required by the struct scic_sds_phy on - * entering the SCI_BASE_PHY_STATE_FINAL. - This function sets the state - * handlers for the phy object base state machine final state. none - */ -static void scic_sds_phy_final_state_enter(void *object) -{ - struct scic_sds_phy *sci_phy = object; - - scic_sds_phy_set_base_state_handlers(sci_phy, SCI_BASE_PHY_STATE_FINAL); - - /* Nothing to do here */ -} - -/* --------------------------------------------------------------------------- */ - static const struct sci_base_state scic_sds_phy_state_table[] = { - [SCI_BASE_PHY_STATE_INITIAL] = { - .enter_state = scic_sds_phy_initial_state_enter, - }, + [SCI_BASE_PHY_STATE_INITIAL] = { }, [SCI_BASE_PHY_STATE_STOPPED] = { .enter_state = scic_sds_phy_stopped_state_enter, }, @@ -1711,15 +1311,9 @@ static const struct sci_base_state scic_sds_phy_state_table[] = { [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { .enter_state = scic_sds_phy_starting_initial_substate_enter, }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { - .enter_state = scic_sds_phy_starting_await_ossp_en_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { - .enter_state = scic_sds_phy_starting_await_sas_speed_en_substate_enter, - }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { - .enter_state = scic_sds_phy_starting_await_iaf_uf_substate_enter, - }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { }, + [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { }, [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, @@ -1750,9 +1344,7 @@ static const struct sci_base_state scic_sds_phy_state_table[] = { [SCI_BASE_PHY_STATE_RESETTING] = { .enter_state = scic_sds_phy_resetting_state_enter, }, - [SCI_BASE_PHY_STATE_FINAL] = { - .enter_state = scic_sds_phy_final_state_enter, - }, + [SCI_BASE_PHY_STATE_FINAL] = { }, }; void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index a95c74e..5770855 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -140,8 +140,6 @@ struct scic_sds_phy { */ void *sata_timeout_timer; - const struct scic_sds_phy_state_handler *state_handlers; - /** * This field is the pointer to the transport layer register for the SCU * hardware. @@ -504,20 +502,6 @@ enum scic_sds_phy_states { SCI_BASE_PHY_STATE_FINAL, }; - -typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *); -typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32); -typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32); -typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *); - -struct scic_sds_phy_state_handler { - /** - * The state handler for staggered spinup. - */ - scic_sds_phy_power_handler_t consume_power_handler; - -}; - /** * scic_sds_phy_get_index() - * @@ -535,26 +519,6 @@ struct scic_sds_phy_state_handler { #define scic_sds_phy_get_controller(phy) \ (scic_sds_port_get_controller((phy)->owning_port)) -/** - * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for - * this phy object - * - * - */ -#define scic_sds_phy_set_state_handlers(phy, handlers) \ - ((phy)->state_handlers = (handlers)) - -/** - * scic_sds_phy_set_base_state_handlers() - - * - * This macro set the base state handlers for the phy object. - */ -#define scic_sds_phy_set_base_state_handlers(phy, state_id) \ - scic_sds_phy_set_state_handlers(\ - (phy), \ - &scic_sds_phy_state_handler_table[(state_id)] \ - ) - void scic_sds_phy_construct( struct scic_sds_phy *this_phy, struct scic_sds_port *owning_port, -- cgit v0.10.2 From 4f20ef4f57aa52fd3356c143a8f3d2bd18dc61fc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 06:00:31 -0700 Subject: isci: clarify phy to port lookups While cleaning up the driver it is very tempting to convert scic_sds_get_* macros to their open coded equivalent. They are all just pointer dereferences *except* scic_sds_phy_get_port() which returns NULL if the phy is assigned to the dummy port. Clarify this by renaming it to phy_get_non_dummy_port(). Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 675eddd..2ef1c59 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -983,7 +983,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro sci_phy = &ihost->phys[index].sci; state = sci_phy->state_machine.current_state_id; - if (!scic_sds_phy_get_port(sci_phy)) + if (!phy_get_non_dummy_port(sci_phy)) continue; /* The controller start operation is complete iff: @@ -1014,7 +1014,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro sci_phy = &ihost->phys[scic->next_phy_to_start].sci; if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - if (scic_sds_phy_get_port(sci_phy) == NULL) { + if (phy_get_non_dummy_port(sci_phy) == NULL) { scic->next_phy_to_start++; /* Caution recursion ahead be forwarned diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 9a5ec37..8bd1a85 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -287,7 +287,7 @@ static void scic_sds_phy_sata_timeout(void *phy) * port (i.e. it's contained in the dummy port). !NULL All other * values indicate a handle/pointer to the port containing the phy. */ -struct scic_sds_port *scic_sds_phy_get_port( +struct scic_sds_port *phy_get_non_dummy_port( struct scic_sds_phy *sci_phy) { if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT) @@ -893,7 +893,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, break; case SCU_EVENT_BROADCAST_CHANGE: /* Broadcast change received. Notify the port. */ - if (scic_sds_phy_get_port(sci_phy) != NULL) + if (phy_get_non_dummy_port(sci_phy) != NULL) scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); else sci_phy->bcn_received_while_port_unassigned = true; @@ -1238,7 +1238,7 @@ static void scic_sds_phy_stopped_state_enter(void *object) if (sci_phy->state_machine.previous_state_id != SCI_BASE_PHY_STATE_INITIAL) scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), + phy_get_non_dummy_port(sci_phy), sci_phy); } @@ -1255,7 +1255,7 @@ static void scic_sds_phy_starting_state_enter(void *object) if (sci_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY) scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), + phy_get_non_dummy_port(sci_phy), sci_phy); sci_base_state_machine_change_state(&sci_phy->state_machine, @@ -1267,7 +1267,7 @@ static void scic_sds_phy_ready_state_enter(void *object) struct scic_sds_phy *sci_phy = object; scic_sds_controller_link_up(scic_sds_phy_get_controller(sci_phy), - scic_sds_phy_get_port(sci_phy), + phy_get_non_dummy_port(sci_phy), sci_phy); } diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 5770855..7694ec4 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -524,8 +524,7 @@ void scic_sds_phy_construct( struct scic_sds_port *owning_port, u8 phy_index); -struct scic_sds_port *scic_sds_phy_get_port( - struct scic_sds_phy *this_phy); +struct scic_sds_port *phy_get_non_dummy_port(struct scic_sds_phy *sci_phy); void scic_sds_phy_set_port( struct scic_sds_phy *this_phy, diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index dbff283..6d26330 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -485,7 +485,7 @@ static enum sci_status scic_sds_port_set_phy( * not already have a phy assinged to the phy index. */ if ( (port->phy_table[phy->phy_index] == NULL) - && (scic_sds_phy_get_port(phy) == NULL) + && (phy_get_non_dummy_port(phy) == NULL) && scic_sds_port_is_valid_phy_assignment(port, phy->phy_index) ) { /* @@ -516,7 +516,7 @@ static enum sci_status scic_sds_port_clear_phy( { /* Make sure that this phy is part of this port */ if (port->phy_table[phy->phy_index] == phy && - scic_sds_phy_get_port(phy) == port) { + phy_get_non_dummy_port(phy) == port) { struct scic_sds_controller *scic = port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index 028ffa3..ca76f49 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -353,7 +353,7 @@ static void scic_sds_mpc_agent_timeout_handler(void *object) if (configure_phy_mask & (1 << index)) { port_agent->link_up_handler(scic, port_agent, - scic_sds_phy_get_port(sci_phy), + phy_get_non_dummy_port(sci_phy), sci_phy); } } -- cgit v0.10.2 From c777c26ca2a06164e1b8c8ccf4cd76cd645a9bbb Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Wed, 11 May 2011 23:52:16 +0000 Subject: isci: c99 port state handlers Name the table fields for consistancy and clarity. Signed-off-by: Piotr Sawicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 6d26330..e386066 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1567,56 +1567,48 @@ static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds return default_port_handler(sci_port, __func__); } - - -static struct scic_sds_port_state_handler -scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = { - { - /* SCIC_SDS_PORT_READY_SUBSTATE_WAITING */ - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_ready_substate_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_ready_waiting_substate_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_ready_waiting_substate_start_io_handler, - scic_sds_port_ready_substate_complete_io_handler, +static struct scic_sds_port_state_handler scic_sds_port_ready_substate_handler_table[] = { + [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_ready_substate_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, + .remove_phy_handler = scic_sds_port_default_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_ready_waiting_substate_link_up_handler, + .link_down_handler = scic_sds_port_default_link_down_handler, + .start_io_handler = scic_sds_port_ready_waiting_substate_start_io_handler, + .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, - - { - /* SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL */ - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_ready_operational_substate_reset_handler, - scic_sds_port_ready_substate_add_phy_handler, - scic_sds_port_ready_substate_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_ready_operational_substate_link_up_handler, - scic_sds_port_ready_operational_substate_link_down_handler, - scic_sds_port_ready_operational_substate_start_io_handler, - scic_sds_port_ready_substate_complete_io_handler, + [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_ready_substate_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_ready_operational_substate_reset_handler, + .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, + .remove_phy_handler = scic_sds_port_ready_substate_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_ready_operational_substate_link_up_handler, + .link_down_handler = scic_sds_port_ready_operational_substate_link_down_handler, + .start_io_handler = scic_sds_port_ready_operational_substate_start_io_handler, + .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, - - { - /* SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING */ - scic_sds_port_default_start_handler, - scic_sds_port_ready_substate_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_ready_configuring_substate_add_phy_handler, - scic_sds_port_ready_configuring_substate_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_ready_configuring_substate_complete_io_handler + [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_ready_substate_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_ready_configuring_substate_add_phy_handler, + .remove_phy_handler = scic_sds_port_ready_configuring_substate_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_default_link_up_handler, + .link_down_handler = scic_sds_port_default_link_down_handler, + .start_io_handler = scic_sds_port_default_start_io_handler, + .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler } }; @@ -2166,83 +2158,76 @@ static void scic_sds_port_reset_state_link_down_handler( scic_sds_port_deactivate_phy(port, phy, false); } -static struct scic_sds_port_state_handler -scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] = -{ - /* SCI_BASE_PORT_STATE_STOPPED */ - { - scic_sds_port_stopped_state_start_handler, - scic_sds_port_stopped_state_stop_handler, - scic_sds_port_stopped_state_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_stopped_state_add_phy_handler, - scic_sds_port_stopped_state_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_default_complete_io_handler +static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = { + [SCI_BASE_PORT_STATE_STOPPED] = { + .start_handler = scic_sds_port_stopped_state_start_handler, + .stop_handler = scic_sds_port_stopped_state_stop_handler, + .destruct_handler = scic_sds_port_stopped_state_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_stopped_state_add_phy_handler, + .remove_phy_handler = scic_sds_port_stopped_state_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_default_link_up_handler, + .link_down_handler = scic_sds_port_default_link_down_handler, + .start_io_handler = scic_sds_port_default_start_io_handler, + .complete_io_handler = scic_sds_port_default_complete_io_handler }, - /* SCI_BASE_PORT_STATE_STOPPING */ - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_stopping_state_complete_io_handler + [SCI_BASE_PORT_STATE_STOPPING] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_default_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_default_add_phy_handler, + .remove_phy_handler = scic_sds_port_default_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_default_link_up_handler, + .link_down_handler = scic_sds_port_default_link_down_handler, + .start_io_handler = scic_sds_port_default_start_io_handler, + .complete_io_handler = scic_sds_port_stopping_state_complete_io_handler }, - /* SCI_BASE_PORT_STATE_READY */ - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_general_complete_io_handler + [SCI_BASE_PORT_STATE_READY] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_default_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_default_add_phy_handler, + .remove_phy_handler = scic_sds_port_default_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_default_link_up_handler, + .link_down_handler = scic_sds_port_default_link_down_handler, + .start_io_handler = scic_sds_port_default_start_io_handler, + .complete_io_handler = scic_sds_port_general_complete_io_handler }, - /* SCI_BASE_PORT_STATE_RESETTING */ - { - scic_sds_port_default_start_handler, - scic_sds_port_reset_state_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_reset_state_link_up_handler, - scic_sds_port_reset_state_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_general_complete_io_handler + [SCI_BASE_PORT_STATE_RESETTING] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_reset_state_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_default_add_phy_handler, + .remove_phy_handler = scic_sds_port_default_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_reset_state_link_up_handler, + .link_down_handler = scic_sds_port_reset_state_link_down_handler, + .start_io_handler = scic_sds_port_default_start_io_handler, + .complete_io_handler = scic_sds_port_general_complete_io_handler }, - /* SCI_BASE_PORT_STATE_FAILED */ - { - scic_sds_port_default_start_handler, - scic_sds_port_default_stop_handler, - scic_sds_port_default_destruct_handler, - scic_sds_port_default_reset_handler, - scic_sds_port_default_add_phy_handler, - scic_sds_port_default_remove_phy_handler, - scic_sds_port_default_frame_handler, - scic_sds_port_default_event_handler, - scic_sds_port_default_link_up_handler, - scic_sds_port_default_link_down_handler, - scic_sds_port_default_start_io_handler, - scic_sds_port_general_complete_io_handler + [SCI_BASE_PORT_STATE_FAILED] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_default_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_default_add_phy_handler, + .remove_phy_handler = scic_sds_port_default_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_default_link_up_handler, + .link_down_handler = scic_sds_port_default_link_down_handler, + .start_io_handler = scic_sds_port_default_start_io_handler, + .complete_io_handler = scic_sds_port_general_complete_io_handler } }; -- cgit v0.10.2 From e91f41ef809a2d1b8cdba52ac380aecd706c93dd Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Wed, 11 May 2011 23:52:21 +0000 Subject: isci: merge port ready substates into primary state machine This conversion was complicated by the fact that the ready state exit routine took unconditional action beyond just stopping the substate machine (like in previous conversions). In order to ensure identical behaviour every state transition needs to be instrumented to catch ready-->!ready transitions and execute scic_sds_port_invalidate_dummy_remote_node() Reported-by: Christoph Hellwig Signed-off-by: Piotr Sawicki [fix ready state exit handling] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index e386066..2ea3d0f 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -61,6 +61,8 @@ #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) #define SCU_DUMMY_INDEX (0xFFFF) +static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[]; + static void isci_port_change_state(struct isci_port *iport, enum isci_status status) { unsigned long flags; @@ -856,6 +858,40 @@ static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port, } } +static bool is_port_ready_state(enum scic_sds_port_states state) +{ + switch (state) { + case SCI_BASE_PORT_STATE_READY: + case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: + case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + return true; + default: + return false; + } +} + +/* flag dummy rnc hanling when exiting a ready state */ +static void port_state_machine_change(struct scic_sds_port *sci_port, + enum scic_sds_port_states state) +{ + struct sci_base_state_machine *sm = &sci_port->state_machine; + enum scic_sds_port_states old_state = sm->current_state_id; + + if (is_port_ready_state(old_state) && !is_port_ready_state(state)) + sci_port->ready_exit = true; + + sci_base_state_machine_change_state(sm, state); + sci_port->ready_exit = false; +} + +static void port_state_machine_stop(struct scic_sds_port *sci_port) +{ + sci_port->ready_exit = true; + sci_base_state_machine_stop(&sci_port->state_machine); + sci_port->ready_exit = false; +} + /** * scic_sds_port_general_link_up_handler - phy can be assigned to port? * @sci_port: scic_sds_port object for which has a phy that has gone link up. @@ -891,7 +927,7 @@ static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user); if (sm->current_state_id == SCI_BASE_PORT_STATE_RESETTING) - sci_base_state_machine_change_state(sm, SCI_BASE_PORT_STATE_READY); + port_state_machine_change(sci_port, SCI_BASE_PORT_STATE_READY); } else scic_sds_port_invalid_link_up(sci_port, sci_phy); } @@ -1025,46 +1061,33 @@ static void scic_sds_port_timeout_handler(void *port) struct scic_sds_port *sci_port = port; u32 current_state; - current_state = sci_base_state_machine_get_state( - &sci_port->state_machine); + current_state = sci_base_state_machine_get_state(&sci_port->state_machine); if (current_state == SCI_BASE_PORT_STATE_RESETTING) { - /* - * if the port is still in the resetting state then the - * timeout fired before the reset completed. + /* if the port is still in the resetting state then the timeout + * fired before the reset completed. */ - sci_base_state_machine_change_state( - &sci_port->state_machine, - SCI_BASE_PORT_STATE_FAILED); + port_state_machine_change(sci_port, SCI_BASE_PORT_STATE_FAILED); } else if (current_state == SCI_BASE_PORT_STATE_STOPPED) { - /* - * if the port is stopped then the start request failed - * In this case stay in the stopped state. + /* if the port is stopped then the start request failed In this + * case stay in the stopped state. */ dev_err(sciport_to_dev(sci_port), "%s: SCIC Port 0x%p failed to stop before tiemout.\n", __func__, sci_port); } else if (current_state == SCI_BASE_PORT_STATE_STOPPING) { - /* - * if the port is still stopping then the stop has not - * completed - */ - isci_port_stop_complete( - scic_sds_port_get_controller(sci_port), - sci_port, - SCI_FAILURE_TIMEOUT); + /* if the port is still stopping then the stop has not completed */ + isci_port_stop_complete(sci_port->owning_controller, + sci_port, + SCI_FAILURE_TIMEOUT); } else { - /* - * The port is in the ready state and we have a timer + /* The port is in the ready state and we have a timer * reporting a timeout this should not happen. */ dev_err(sciport_to_dev(sci_port), "%s: SCIC Port 0x%p is processing a timeout operation " - "in state %d.\n", - __func__, - sci_port, - current_state); + "in state %d.\n", __func__, sci_port, current_state); } } @@ -1160,14 +1183,9 @@ static void scic_port_enable_broadcast_change_notification(struct scic_sds_port * object. This function will transition the ready substate machine to its * final state. enum sci_status SCI_SUCCESS */ -static enum sci_status scic_sds_port_ready_substate_stop_handler( - struct scic_sds_port *port) +static enum sci_status scic_sds_port_ready_substate_stop_handler(struct scic_sds_port *sci_port) { - sci_base_state_machine_change_state( - &port->state_machine, - SCI_BASE_PORT_STATE_STOPPING - ); - + port_state_machine_change(sci_port, SCI_BASE_PORT_STATE_STOPPING); return SCI_SUCCESS; } @@ -1186,48 +1204,40 @@ static enum sci_status scic_sds_port_ready_substate_complete_io_handler( return SCI_SUCCESS; } -static enum sci_status scic_sds_port_ready_substate_add_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) +static enum sci_status scic_sds_port_ready_substate_add_phy_handler(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) { enum sci_status status; - status = scic_sds_port_set_phy(port, phy); + status = scic_sds_port_set_phy(sci_port, sci_phy); - if (status == SCI_SUCCESS) { - scic_sds_port_general_link_up_handler(port, phy, true); - - port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + if (status != SCI_SUCCESS) + return status; - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); - } + scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); + sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); return status; } -static enum sci_status scic_sds_port_ready_substate_remove_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) +static enum sci_status scic_sds_port_ready_substate_remove_phy_handler(struct scic_sds_port *port, + struct scic_sds_phy *phy) { enum sci_status status; status = scic_sds_port_clear_phy(port, phy); - if (status == SCI_SUCCESS) { - scic_sds_port_deactivate_phy(port, phy, true); + if (status != SCI_SUCCESS) + return status; - port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + scic_sds_port_deactivate_phy(port, phy, true); - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); - } + port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(port, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); return status; } @@ -1255,10 +1265,8 @@ static void scic_sds_port_ready_waiting_substate_link_up_handler( * it and continue. */ scic_sds_port_activate_phy(sci_port, sci_phy, true); - sci_base_state_machine_change_state( - &sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL - ); + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); } /* @@ -1317,9 +1325,8 @@ sci_status scic_sds_port_ready_operational_substate_reset_handler( port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; - sci_base_state_machine_change_state( - &port->state_machine, - SCI_BASE_PORT_STATE_RESETTING); + port_state_machine_change(port, + SCI_BASE_PORT_STATE_RESETTING); } } @@ -1365,8 +1372,8 @@ static void scic_sds_port_ready_operational_substate_link_down_handler( * the port to the WAITING state until such time as a phy goes * link up. */ if (sci_port->active_phy_mask == 0) - sci_base_state_machine_change_state(&sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); } /* @@ -1406,10 +1413,8 @@ static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( /* * Re-enter the configuring state since this may be the last phy in * the port. */ - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); + port_state_machine_change(port, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); } return status; @@ -1427,17 +1432,15 @@ static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handl status = scic_sds_port_clear_phy(port, phy); - if (status == SCI_SUCCESS) { - scic_sds_port_deactivate_phy(port, phy, true); + if (status != SCI_SUCCESS) + return status; + scic_sds_port_deactivate_phy(port, phy, true); - /* - * Re-enter the configuring state since this may be the last phy in - * the port. */ - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING - ); - } + /* Re-enter the configuring state since this may be the last phy in + * the port + */ + port_state_machine_change(port, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); return status; } @@ -1460,10 +1463,8 @@ scic_sds_port_ready_configuring_substate_complete_io_handler( scic_sds_port_decrement_request_count(port); if (port->started_request_count == 0) { - sci_base_state_machine_change_state( - &port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL - ); + port_state_machine_change(port, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); } return SCI_SUCCESS; @@ -1567,61 +1568,6 @@ static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds return default_port_handler(sci_port, __func__); } -static struct scic_sds_port_state_handler scic_sds_port_ready_substate_handler_table[] = { - [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .start_handler = scic_sds_port_default_start_handler, - .stop_handler = scic_sds_port_ready_substate_stop_handler, - .destruct_handler = scic_sds_port_default_destruct_handler, - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, - .remove_phy_handler = scic_sds_port_default_remove_phy_handler, - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, - .link_up_handler = scic_sds_port_ready_waiting_substate_link_up_handler, - .link_down_handler = scic_sds_port_default_link_down_handler, - .start_io_handler = scic_sds_port_ready_waiting_substate_start_io_handler, - .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, - }, - [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .start_handler = scic_sds_port_default_start_handler, - .stop_handler = scic_sds_port_ready_substate_stop_handler, - .destruct_handler = scic_sds_port_default_destruct_handler, - .reset_handler = scic_sds_port_ready_operational_substate_reset_handler, - .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, - .remove_phy_handler = scic_sds_port_ready_substate_remove_phy_handler, - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, - .link_up_handler = scic_sds_port_ready_operational_substate_link_up_handler, - .link_down_handler = scic_sds_port_ready_operational_substate_link_down_handler, - .start_io_handler = scic_sds_port_ready_operational_substate_start_io_handler, - .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, - }, - [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .start_handler = scic_sds_port_default_start_handler, - .stop_handler = scic_sds_port_ready_substate_stop_handler, - .destruct_handler = scic_sds_port_default_destruct_handler, - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_ready_configuring_substate_add_phy_handler, - .remove_phy_handler = scic_sds_port_ready_configuring_substate_remove_phy_handler, - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, - .link_up_handler = scic_sds_port_default_link_up_handler, - .link_down_handler = scic_sds_port_default_link_down_handler, - .start_io_handler = scic_sds_port_default_start_io_handler, - .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler - } -}; - -/** - * scic_sds_port_set_ready_state_handlers() - - * - * This macro sets the port ready substate handlers. - */ -#define scic_sds_port_set_ready_state_handlers(port, state_id) \ - scic_sds_port_set_state_handlers(\ - port, &scic_sds_port_ready_substate_handler_table[(state_id)] \ - ) - /* * ****************************************************************************** * * PORT STATE PRIVATE METHODS @@ -1729,7 +1675,7 @@ static void scic_sds_port_ready_substate_waiting_enter(void *object) { struct scic_sds_port *sci_port = object; - scic_sds_port_set_ready_state_handlers( + scic_sds_port_set_base_state_handlers( sci_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING ); @@ -1739,10 +1685,8 @@ static void scic_sds_port_ready_substate_waiting_enter(void *object) if (sci_port->active_phy_mask != 0) { /* At least one of the phys on the port is ready */ - sci_base_state_machine_change_state( - &sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL - ); + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); } } @@ -1763,7 +1707,7 @@ static void scic_sds_port_ready_substate_operational_enter(void *object) struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); - scic_sds_port_set_ready_state_handlers( + scic_sds_port_set_base_state_handlers( sci_port, SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); @@ -1788,6 +1732,31 @@ static void scic_sds_port_ready_substate_operational_enter(void *object) scic_sds_port_post_dummy_request(sci_port); } +static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + u8 phys_index = sci_port->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = sci_port->reserved_rni; + u32 command; + + rnc = &scic->remote_node_context_table[rni]; + + rnc->ssp.is_valid = false; + + /* ensure the preceding tc abort request has reached the + * controller and give it ample time to act before posting the rnc + * invalidate + */ + readl(&scic->smu_registers->interrupt_status); /* flush */ + udelay(10); + + command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + scic_sds_controller_post_request(scic, command); +} + /** * * @object: This is the object which is cast to a struct scic_sds_port object. @@ -1811,6 +1780,9 @@ static void scic_sds_port_ready_substate_operational_exit(void *object) scic_sds_port_abort_dummy_request(sci_port); isci_port_not_ready(ihost, iport); + + if (sci_port->ready_exit) + scic_sds_port_invalidate_dummy_remote_node(sci_port); } /* @@ -1833,20 +1805,18 @@ static void scic_sds_port_ready_substate_configuring_enter(void *object) struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); - scic_sds_port_set_ready_state_handlers( + scic_sds_port_set_base_state_handlers( sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); if (sci_port->active_phy_mask == 0) { isci_port_not_ready(ihost, iport); - sci_base_state_machine_change_state( - &sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); } else if (sci_port->started_request_count == 0) - sci_base_state_machine_change_state( - &sci_port->ready_substate_machine, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); } static void scic_sds_port_ready_substate_configuring_exit(void *object) @@ -1854,24 +1824,12 @@ static void scic_sds_port_ready_substate_configuring_exit(void *object) struct scic_sds_port *sci_port = object; scic_sds_port_suspend_port_task_scheduler(sci_port); + if (sci_port->ready_exit) + scic_sds_port_invalidate_dummy_remote_node(sci_port); } /* --------------------------------------------------------------------------- */ -static const struct sci_base_state scic_sds_port_ready_substate_table[] = { - [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .enter_state = scic_sds_port_ready_substate_waiting_enter, - }, - [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .enter_state = scic_sds_port_ready_substate_operational_enter, - .exit_state = scic_sds_port_ready_substate_operational_exit - }, - [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .enter_state = scic_sds_port_ready_substate_configuring_enter, - .exit_state = scic_sds_port_ready_substate_configuring_exit - }, -}; - /** * * @port: This is the struct scic_sds_port object on which the io request count will @@ -1970,9 +1928,8 @@ scic_sds_port_stopped_state_start_handler(struct scic_sds_port *sci_port) * silicon. */ if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { - sci_base_state_machine_change_state( - &sci_port->state_machine, - SCI_BASE_PORT_STATE_READY); + port_state_machine_change(sci_port, + SCI_BASE_PORT_STATE_READY); return SCI_SUCCESS; } else @@ -2003,10 +1960,9 @@ static enum sci_status scic_sds_port_stopped_state_stop_handler( * struct scic_sds_port can be destroyed. This function causes the port object to * transition to the SCI_BASE_PORT_STATE_FINAL. enum sci_status SCI_SUCCESS */ -static enum sci_status scic_sds_port_stopped_state_destruct_handler( - struct scic_sds_port *port) +static enum sci_status scic_sds_port_stopped_state_destruct_handler(struct scic_sds_port *port) { - sci_base_state_machine_stop(&port->state_machine); + port_state_machine_stop(port); return SCI_SUCCESS; } @@ -2087,10 +2043,9 @@ static enum sci_status scic_sds_port_stopping_state_complete_io_handler( { scic_sds_port_decrement_request_count(sci_port); - if (sci_port->started_request_count == 0) { - sci_base_state_machine_change_state(&sci_port->state_machine, - SCI_BASE_PORT_STATE_STOPPED); - } + if (sci_port->started_request_count == 0) + port_state_machine_change(sci_port, + SCI_BASE_PORT_STATE_STOPPED); return SCI_SUCCESS; } @@ -2110,10 +2065,8 @@ static enum sci_status scic_sds_port_stopping_state_complete_io_handler( static enum sci_status scic_sds_port_reset_state_stop_handler( struct scic_sds_port *port) { - sci_base_state_machine_change_state( - &port->state_machine, - SCI_BASE_PORT_STATE_STOPPING - ); + port_state_machine_change(port, + SCI_BASE_PORT_STATE_STOPPING); return SCI_SUCCESS; } @@ -2201,6 +2154,48 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_general_complete_io_handler }, + [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_ready_substate_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, + .remove_phy_handler = scic_sds_port_default_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_ready_waiting_substate_link_up_handler, + .link_down_handler = scic_sds_port_default_link_down_handler, + .start_io_handler = scic_sds_port_ready_waiting_substate_start_io_handler, + .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, + }, + [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_ready_substate_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_ready_operational_substate_reset_handler, + .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, + .remove_phy_handler = scic_sds_port_ready_substate_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_ready_operational_substate_link_up_handler, + .link_down_handler = scic_sds_port_ready_operational_substate_link_down_handler, + .start_io_handler = scic_sds_port_ready_operational_substate_start_io_handler, + .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, + }, + [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { + .start_handler = scic_sds_port_default_start_handler, + .stop_handler = scic_sds_port_ready_substate_stop_handler, + .destruct_handler = scic_sds_port_default_destruct_handler, + .reset_handler = scic_sds_port_default_reset_handler, + .add_phy_handler = scic_sds_port_ready_configuring_substate_add_phy_handler, + .remove_phy_handler = scic_sds_port_ready_configuring_substate_remove_phy_handler, + .frame_handler = scic_sds_port_default_frame_handler, + .event_handler = scic_sds_port_default_event_handler, + .link_up_handler = scic_sds_port_default_link_up_handler, + .link_down_handler = scic_sds_port_default_link_down_handler, + .start_io_handler = scic_sds_port_default_start_io_handler, + .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler + }, [SCI_BASE_PORT_STATE_RESETTING] = { .start_handler = scic_sds_port_default_start_handler, .stop_handler = scic_sds_port_reset_state_stop_handler, @@ -2299,31 +2294,6 @@ static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) scic_sds_controller_post_request(scic, command); } -static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - u8 phys_index = sci_port->physical_port_index; - union scu_remote_node_context *rnc; - u16 rni = sci_port->reserved_rni; - u32 command; - - rnc = &scic->remote_node_context_table[rni]; - - rnc->ssp.is_valid = false; - - /* ensure the preceding tc abort request has reached the - * controller and give it ample time to act before posting the rnc - * invalidate - */ - readl(&scic->smu_registers->interrupt_status); /* flush */ - udelay(10); - - command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | - phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - - scic_sds_controller_post_request(scic, command); -} - /* * ****************************************************************************** * * PORT STATE METHODS @@ -2404,15 +2374,8 @@ static void scic_sds_port_ready_state_enter(void *object) scic_sds_port_post_dummy_remote_node(sci_port); /* Start the ready substate machine */ - sci_base_state_machine_start(&sci_port->ready_substate_machine); -} - -static void scic_sds_port_ready_state_exit(void *object) -{ - struct scic_sds_port *sci_port = object; - - sci_base_state_machine_stop(&sci_port->ready_substate_machine); - scic_sds_port_invalidate_dummy_remote_node(sci_port); + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); } /** @@ -2516,7 +2479,17 @@ static const struct sci_base_state scic_sds_port_state_table[] = { }, [SCI_BASE_PORT_STATE_READY] = { .enter_state = scic_sds_port_ready_state_enter, - .exit_state = scic_sds_port_ready_state_exit + }, + [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { + .enter_state = scic_sds_port_ready_substate_waiting_enter, + }, + [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { + .enter_state = scic_sds_port_ready_substate_operational_enter, + .exit_state = scic_sds_port_ready_substate_operational_exit + }, + [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { + .enter_state = scic_sds_port_ready_substate_configuring_enter, + .exit_state = scic_sds_port_ready_substate_configuring_exit }, [SCI_BASE_PORT_STATE_RESETTING] = { .enter_state = scic_sds_port_resetting_state_enter, @@ -2537,14 +2510,10 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, sci_base_state_machine_start(&sci_port->state_machine); - sci_base_state_machine_construct(&sci_port->ready_substate_machine, - sci_port, - scic_sds_port_ready_substate_table, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); - sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; sci_port->physical_port_index = index; sci_port->active_phy_mask = 0; + sci_port->ready_exit = false; sci_port->owning_controller = scic; diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index ea41dce..e63c34d 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -81,12 +81,13 @@ enum isci_status { * The core port object provides the the abstraction for an SCU port. */ struct scic_sds_port { - /** * This field contains the information for the base port state machine. */ struct sci_base_state_machine state_machine; + bool ready_exit; + /** * This field is the port index that is reported to the SCI USER. * This allows the actual hardware physical port to change without @@ -150,11 +151,6 @@ struct scic_sds_port { */ struct scic_sds_port_state_handler *state_handlers; - /** - * This field is the ready substate machine for the port. - */ - struct sci_base_state_machine ready_substate_machine; - /* / Memory mapped hardware register space */ /** @@ -175,7 +171,6 @@ struct scic_sds_port { * This field is the VIIT register space for ths port object. */ struct scu_viit_entry __iomem *viit_registers; - }; @@ -229,35 +224,6 @@ struct scic_port_properties { }; /** - * enum SCIC_SDS_PORT_READY_SUBSTATES - - * - * This enumeration depicts all of the states for the core port ready substate - * machine. - */ -enum scic_sds_port_ready_substates { - /** - * The substate where the port is started and ready but has no - * active phys. - */ - SCIC_SDS_PORT_READY_SUBSTATE_WAITING, - - /** - * The substate where the port is started and ready and there is - * at least one phy operational. - */ - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL, - - /** - * The substate where the port is started and there was an - * add/remove phy event. This state is only used in Automatic - * Port Configuration Mode (APC) - */ - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING, - - SCIC_SDS_PORT_READY_MAX_SUBSTATES -}; - -/** * enum scic_sds_port_states - This enumeration depicts all the states for the * common port state machine. * @@ -287,6 +253,25 @@ enum scic_sds_port_states { SCI_BASE_PORT_STATE_READY, /** + * The substate where the port is started and ready but has no + * active phys. + */ + SCIC_SDS_PORT_READY_SUBSTATE_WAITING, + + /** + * The substate where the port is started and ready and there is + * at least one phy operational. + */ + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL, + + /** + * The substate where the port is started and there was an + * add/remove phy event. This state is only used in Automatic + * Port Configuration Mode (APC) + */ + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING, + + /** * This state indicates the port is in the process of performing a hard * reset. Thus, the user is unable to perform IO operations on this * port. -- cgit v0.10.2 From d76f71d988ef48384593ad97ebc762d9257d96a8 Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Wed, 11 May 2011 23:52:26 +0000 Subject: isci: remove port start handler remove the handler from the port state handler table and implement the logic directly in scic_sds_port_start(). Signed-off-by: Piotr Sawicki [remove a level of indirection] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 2ef1c59..7abfb66 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1108,7 +1108,7 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, for (index = 0; index < scic->logical_port_entries; index++) { struct scic_sds_port *sci_port = &ihost->ports[index].sci; - result = sci_port->state_handlers->start_handler(sci_port); + result = scic_sds_port_start(sci_port); if (result) return result; } diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 2ea3d0f..64559e8e 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1480,12 +1480,6 @@ static enum sci_status default_port_handler(struct scic_sds_port *sci_port, } static enum sci_status -scic_sds_port_default_start_handler(struct scic_sds_port *sci_port) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status scic_sds_port_default_stop_handler(struct scic_sds_port *sci_port) { return default_port_handler(sci_port, __func__); @@ -1853,95 +1847,6 @@ static enum sci_status scic_sds_port_general_complete_io_handler( return SCI_SUCCESS; } -/** - * scic_sds_port_stopped_state_start_handler() - stop a port from "started" - * - * @port: This is the struct scic_sds_port object which is cast into a - * struct scic_sds_port object. - * - * This function takes the struct scic_sds_port from a stopped state and - * attempts to start it. To start a port it must have no assiged devices and - * it must have at least one phy assigned to it. If those conditions are - * met then the port can transition to the ready state. - * enum sci_status - * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION - * This struct scic_sds_port object could not be started because the port - * configuration is not valid. - * SCI_SUCCESS - * the start request is successful and the struct scic_sds_port object - * has transitioned to the SCI_BASE_PORT_STATE_READY. - */ -static enum sci_status -scic_sds_port_stopped_state_start_handler(struct scic_sds_port *sci_port) -{ - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); - enum sci_status status = SCI_SUCCESS; - u32 phy_mask; - - if (sci_port->assigned_device_count > 0) { - /* - * @todo This is a start failure operation because - * there are still devices assigned to this port. - * There must be no devices assigned to a port on a - * start operation. - */ - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - - sci_port->timer_handle = - isci_timer_create(ihost, - sci_port, - scic_sds_port_timeout_handler); - - if (!sci_port->timer_handle) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - - if (sci_port->reserved_rni == SCU_DUMMY_INDEX) { - u16 rni = scic_sds_remote_node_table_allocate_remote_node( - &scic->available_remote_nodes, 1); - - if (rni != SCU_DUMMY_INDEX) - scic_sds_port_construct_dummy_rnc(sci_port, rni); - else - status = SCI_FAILURE_INSUFFICIENT_RESOURCES; - sci_port->reserved_rni = rni; - } - - if (sci_port->reserved_tci == SCU_DUMMY_INDEX) { - /* Allocate a TCI and remove the sequence nibble */ - u16 tci = scic_controller_allocate_io_tag(scic); - - if (tci != SCU_DUMMY_INDEX) - scic_sds_port_construct_dummy_task(sci_port, tci); - else - status = SCI_FAILURE_INSUFFICIENT_RESOURCES; - sci_port->reserved_tci = tci; - } - - if (status == SCI_SUCCESS) { - phy_mask = scic_sds_port_get_phys(sci_port); - - /* - * There are one or more phys assigned to this port. Make sure - * the port's phy mask is in fact legal and supported by the - * silicon. - */ - if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { - port_state_machine_change(sci_port, - SCI_BASE_PORT_STATE_READY); - - return SCI_SUCCESS; - } else - status = SCI_FAILURE; - } - - if (status != SCI_SUCCESS) - scic_sds_port_destroy_dummy_resources(sci_port); - - return status; -} - /* * This method takes the struct scic_sds_port that is in a stopped state and handles a * stop request. This function takes no action. enum sci_status SCI_SUCCESS the @@ -2111,9 +2016,85 @@ static void scic_sds_port_reset_state_link_down_handler( scic_sds_port_deactivate_phy(port, phy, false); } +enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) +{ + struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); + enum sci_status status = SCI_SUCCESS; + enum scic_sds_port_states state; + u32 phy_mask; + + state = sci_port->state_machine.current_state_id; + if (state != SCI_BASE_PORT_STATE_STOPPED) { + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + if (sci_port->assigned_device_count > 0) { + /* TODO This is a start failure operation because + * there are still devices assigned to this port. + * There must be no devices assigned to a port on a + * start operation. + */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + sci_port->timer_handle = + isci_timer_create(ihost, + sci_port, + scic_sds_port_timeout_handler); + + if (!sci_port->timer_handle) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + + if (sci_port->reserved_rni == SCU_DUMMY_INDEX) { + u16 rni = scic_sds_remote_node_table_allocate_remote_node( + &scic->available_remote_nodes, 1); + + if (rni != SCU_DUMMY_INDEX) + scic_sds_port_construct_dummy_rnc(sci_port, rni); + else + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + sci_port->reserved_rni = rni; + } + + if (sci_port->reserved_tci == SCU_DUMMY_INDEX) { + /* Allocate a TCI and remove the sequence nibble */ + u16 tci = scic_controller_allocate_io_tag(scic); + + if (tci != SCU_DUMMY_INDEX) + scic_sds_port_construct_dummy_task(sci_port, tci); + else + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + sci_port->reserved_tci = tci; + } + + if (status == SCI_SUCCESS) { + phy_mask = scic_sds_port_get_phys(sci_port); + + /* + * There are one or more phys assigned to this port. Make sure + * the port's phy mask is in fact legal and supported by the + * silicon. + */ + if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { + port_state_machine_change(sci_port, + SCI_BASE_PORT_STATE_READY); + + return SCI_SUCCESS; + } + status = SCI_FAILURE; + } + + if (status != SCI_SUCCESS) + scic_sds_port_destroy_dummy_resources(sci_port); + + return status; +} + static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = { [SCI_BASE_PORT_STATE_STOPPED] = { - .start_handler = scic_sds_port_stopped_state_start_handler, .stop_handler = scic_sds_port_stopped_state_stop_handler, .destruct_handler = scic_sds_port_stopped_state_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, @@ -2127,7 +2108,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_default_complete_io_handler }, [SCI_BASE_PORT_STATE_STOPPING] = { - .start_handler = scic_sds_port_default_start_handler, .stop_handler = scic_sds_port_default_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, @@ -2141,7 +2121,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_stopping_state_complete_io_handler }, [SCI_BASE_PORT_STATE_READY] = { - .start_handler = scic_sds_port_default_start_handler, .stop_handler = scic_sds_port_default_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, @@ -2155,7 +2134,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .start_handler = scic_sds_port_default_start_handler, .stop_handler = scic_sds_port_ready_substate_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, @@ -2169,7 +2147,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .start_handler = scic_sds_port_default_start_handler, .stop_handler = scic_sds_port_ready_substate_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_ready_operational_substate_reset_handler, @@ -2183,7 +2160,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .start_handler = scic_sds_port_default_start_handler, .stop_handler = scic_sds_port_ready_substate_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, @@ -2197,7 +2173,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler }, [SCI_BASE_PORT_STATE_RESETTING] = { - .start_handler = scic_sds_port_default_start_handler, .stop_handler = scic_sds_port_reset_state_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, @@ -2211,7 +2186,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCI_BASE_PORT_STATE_FAILED] = { - .start_handler = scic_sds_port_default_start_handler, .stop_handler = scic_sds_port_default_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index e63c34d..2ad2051 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -313,12 +313,6 @@ typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_po struct scic_sds_port_state_handler { /** - * The start_handler specifies the method invoked when a user - * attempts to start a port. - */ - scic_sds_port_handler_t start_handler; - - /** * The stop_handler specifies the method invoked when a user * attempts to stop a port. */ @@ -417,6 +411,8 @@ enum sci_status scic_sds_port_initialize( void __iomem *port_configuration_regsiter, void __iomem *viit_registers); +enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port); + enum sci_status scic_sds_port_add_phy( struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy); -- cgit v0.10.2 From 8bc80d303063d9540493be623df1c9a8dee9ccb8 Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Wed, 11 May 2011 23:52:31 +0000 Subject: isci: unify port stop handlers Implement the stop handlers directly in scic_sds_port_stop() Reported-by: Christoph Hellwig Signed-off-by: Piotr Sawicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 7abfb66..a942384 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1591,10 +1591,8 @@ static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller for (index = 0; index < scic->logical_port_entries; index++) { struct scic_sds_port *sci_port = &ihost->ports[index].sci; - scic_sds_port_handler_t stop; - stop = sci_port->state_handlers->stop_handler; - port_status = stop(sci_port); + port_status = scic_sds_port_stop(sci_port); if ((port_status != SCI_SUCCESS) && (port_status != SCI_FAILURE_INVALID_STATE)) { diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 64559e8e..62e9785 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1179,17 +1179,6 @@ static void scic_port_enable_broadcast_change_notification(struct scic_sds_port * **************************************************************************** */ /* - * This method is the general ready state stop handler for the struct scic_sds_port - * object. This function will transition the ready substate machine to its - * final state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_ready_substate_stop_handler(struct scic_sds_port *sci_port) -{ - port_state_machine_change(sci_port, SCI_BASE_PORT_STATE_STOPPING); - return SCI_SUCCESS; -} - -/* * This method is the general ready substate complete io handler for the * struct scic_sds_port object. This function decrments the outstanding request count * for this port object. enum sci_status SCI_SUCCESS @@ -1480,12 +1469,6 @@ static enum sci_status default_port_handler(struct scic_sds_port *sci_port, } static enum sci_status -scic_sds_port_default_stop_handler(struct scic_sds_port *sci_port) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status scic_sds_port_default_destruct_handler(struct scic_sds_port *sci_port) { return default_port_handler(sci_port, __func__); @@ -1848,18 +1831,6 @@ static enum sci_status scic_sds_port_general_complete_io_handler( } /* - * This method takes the struct scic_sds_port that is in a stopped state and handles a - * stop request. This function takes no action. enum sci_status SCI_SUCCESS the - * stop request is successful as the struct scic_sds_port object is already stopped. - */ -static enum sci_status scic_sds_port_stopped_state_stop_handler( - struct scic_sds_port *port) -{ - /* We are already stopped so there is nothing to do here */ - return SCI_SUCCESS; -} - -/* * This method takes the struct scic_sds_port that is in a stopped state and handles * the destruct request. The stopped state is the only state in which the * struct scic_sds_port can be destroyed. This function causes the port object to @@ -1960,22 +1931,6 @@ static enum sci_status scic_sds_port_stopping_state_complete_io_handler( * * RESETTING STATE HANDLERS * **************************************************************************** */ -/** - * - * @port: This is the port object which is being requested to stop. - * - * This method will stop a failed port. This causes a transition to the - * stopping state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_reset_state_stop_handler( - struct scic_sds_port *port) -{ - port_state_machine_change(port, - SCI_BASE_PORT_STATE_STOPPING); - - return SCI_SUCCESS; -} - /* * This method will transition a failed port to its ready state. The port * failed because a hard reset request timed out but at some time later one or @@ -2093,9 +2048,30 @@ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) return status; } +enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port) +{ + enum scic_sds_port_states state; + + state = sci_port->state_machine.current_state_id; + switch (state) { + case SCI_BASE_PORT_STATE_STOPPED: + return SCI_SUCCESS; + case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: + case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + case SCI_BASE_PORT_STATE_RESETTING: + port_state_machine_change(sci_port, + SCI_BASE_PORT_STATE_STOPPING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = { [SCI_BASE_PORT_STATE_STOPPED] = { - .stop_handler = scic_sds_port_stopped_state_stop_handler, .destruct_handler = scic_sds_port_stopped_state_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_stopped_state_add_phy_handler, @@ -2108,7 +2084,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_default_complete_io_handler }, [SCI_BASE_PORT_STATE_STOPPING] = { - .stop_handler = scic_sds_port_default_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_default_add_phy_handler, @@ -2121,7 +2096,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_stopping_state_complete_io_handler }, [SCI_BASE_PORT_STATE_READY] = { - .stop_handler = scic_sds_port_default_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_default_add_phy_handler, @@ -2134,7 +2108,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .stop_handler = scic_sds_port_ready_substate_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, @@ -2147,7 +2120,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .stop_handler = scic_sds_port_ready_substate_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_ready_operational_substate_reset_handler, .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, @@ -2160,7 +2132,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .stop_handler = scic_sds_port_ready_substate_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_ready_configuring_substate_add_phy_handler, @@ -2173,7 +2144,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler }, [SCI_BASE_PORT_STATE_RESETTING] = { - .stop_handler = scic_sds_port_reset_state_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_default_add_phy_handler, @@ -2186,7 +2156,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCI_BASE_PORT_STATE_FAILED] = { - .stop_handler = scic_sds_port_default_stop_handler, .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_default_add_phy_handler, diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 2ad2051..843eb62 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -313,12 +313,6 @@ typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_po struct scic_sds_port_state_handler { /** - * The stop_handler specifies the method invoked when a user - * attempts to stop a port. - */ - scic_sds_port_handler_t stop_handler; - - /** * The destruct_handler specifies the method invoked when attempting to * destruct a port. */ @@ -412,6 +406,7 @@ enum sci_status scic_sds_port_initialize( void __iomem *viit_registers); enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port); +enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port); enum sci_status scic_sds_port_add_phy( struct scic_sds_port *sci_port, -- cgit v0.10.2 From e6ec5afde9794f50e60788bd10760fcd0d609252 Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Wed, 11 May 2011 23:52:37 +0000 Subject: isci: remove port destruct handler The handler was never used. Signed-off-by: Piotr Sawicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 62e9785..1a058a2 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -885,13 +885,6 @@ static void port_state_machine_change(struct scic_sds_port *sci_port, sci_port->ready_exit = false; } -static void port_state_machine_stop(struct scic_sds_port *sci_port) -{ - sci_port->ready_exit = true; - sci_base_state_machine_stop(&sci_port->state_machine); - sci_port->ready_exit = false; -} - /** * scic_sds_port_general_link_up_handler - phy can be assigned to port? * @sci_port: scic_sds_port object for which has a phy that has gone link up. @@ -1469,12 +1462,6 @@ static enum sci_status default_port_handler(struct scic_sds_port *sci_port, } static enum sci_status -scic_sds_port_default_destruct_handler(struct scic_sds_port *sci_port) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status scic_sds_port_default_reset_handler(struct scic_sds_port *sci_port, u32 timeout) { @@ -1832,19 +1819,6 @@ static enum sci_status scic_sds_port_general_complete_io_handler( /* * This method takes the struct scic_sds_port that is in a stopped state and handles - * the destruct request. The stopped state is the only state in which the - * struct scic_sds_port can be destroyed. This function causes the port object to - * transition to the SCI_BASE_PORT_STATE_FINAL. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_stopped_state_destruct_handler(struct scic_sds_port *port) -{ - port_state_machine_stop(port); - - return SCI_SUCCESS; -} - -/* - * This method takes the struct scic_sds_port that is in a stopped state and handles * the add phy request. In MPC mode the only time a phy can be added to a port * is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not @@ -2072,7 +2046,6 @@ enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port) static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = { [SCI_BASE_PORT_STATE_STOPPED] = { - .destruct_handler = scic_sds_port_stopped_state_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_stopped_state_add_phy_handler, .remove_phy_handler = scic_sds_port_stopped_state_remove_phy_handler, @@ -2084,7 +2057,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_default_complete_io_handler }, [SCI_BASE_PORT_STATE_STOPPING] = { - .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_default_add_phy_handler, .remove_phy_handler = scic_sds_port_default_remove_phy_handler, @@ -2096,7 +2068,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_stopping_state_complete_io_handler }, [SCI_BASE_PORT_STATE_READY] = { - .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_default_add_phy_handler, .remove_phy_handler = scic_sds_port_default_remove_phy_handler, @@ -2108,7 +2079,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, .remove_phy_handler = scic_sds_port_default_remove_phy_handler, @@ -2120,7 +2090,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_ready_operational_substate_reset_handler, .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, .remove_phy_handler = scic_sds_port_ready_substate_remove_phy_handler, @@ -2132,7 +2101,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_ready_configuring_substate_add_phy_handler, .remove_phy_handler = scic_sds_port_ready_configuring_substate_remove_phy_handler, @@ -2144,7 +2112,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler }, [SCI_BASE_PORT_STATE_RESETTING] = { - .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_default_add_phy_handler, .remove_phy_handler = scic_sds_port_default_remove_phy_handler, @@ -2156,7 +2123,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCI_BASE_PORT_STATE_FAILED] = { - .destruct_handler = scic_sds_port_default_destruct_handler, .reset_handler = scic_sds_port_default_reset_handler, .add_phy_handler = scic_sds_port_default_add_phy_handler, .remove_phy_handler = scic_sds_port_default_remove_phy_handler, diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 843eb62..7016371 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -313,12 +313,6 @@ typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_po struct scic_sds_port_state_handler { /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a port. - */ - scic_sds_port_handler_t destruct_handler; - - /** * The reset_handler specifies the method invoked when a user * attempts to hard reset a port. */ -- cgit v0.10.2 From bd6713b416bbfc7d7180114f7cc543b152cc1725 Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Thu, 12 May 2011 19:10:03 +0000 Subject: isci: unify port reset, add_phy, and remove_phy handlers Unify the implementations and remove the state handlers. Reported-by: Christoph Hellwig Signed-off-by: Piotr Sawicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 1a058a2..5501e14 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -531,40 +531,6 @@ static enum sci_status scic_sds_port_clear_phy( return SCI_FAILURE; } -/** - * scic_sds_port_add_phy() - - * @sci_port: This parameter specifies the port in which the phy will be added. - * @sci_phy: This parameter is the phy which is to be added to the port. - * - * This method will add a PHY to the selected port. This method returns an - * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other status - * is failre to add the phy to the port. - */ -enum sci_status scic_sds_port_add_phy( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - return sci_port->state_handlers->add_phy_handler( - sci_port, sci_phy); -} - - -/** - * scic_sds_port_remove_phy() - - * @sci_port: This parameter specifies the port in which the phy will be added. - * @sci_phy: This parameter is the phy which is to be added to the port. - * - * This method will remove the PHY from the selected PORT. This method returns - * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any other - * status is failre to add the phy to the port. - */ -enum sci_status scic_sds_port_remove_phy( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - return sci_port->state_handlers->remove_phy_handler( - sci_port, sci_phy); -} /** * This method requests the SAS address for the supplied SAS port from the SCI @@ -745,23 +711,6 @@ enum sci_status scic_sds_port_initialize( return SCI_SUCCESS; } -/** - * scic_port_hard_reset() - perform port hard reset - * @port: a handle corresponding to the SAS port to be hard reset. - * @reset_timeout: This parameter specifies the number of milliseconds in which - * the port reset operation should complete. - * - * The SCI User callback in scic_user_callbacks_t will only be called once for - * each phy in the SAS Port at completion of the hard reset sequence. Return a - * status indicating whether the hard reset started successfully. SCI_SUCCESS - * This value is returned if the hard reset operation started successfully. - */ -static enum sci_status scic_port_hard_reset(struct scic_sds_port *port, - u32 reset_timeout) -{ - return port->state_handlers->reset_handler( - port, reset_timeout); -} /** * This method assigns the direct attached device ID for this port. @@ -1186,48 +1135,6 @@ static enum sci_status scic_sds_port_ready_substate_complete_io_handler( return SCI_SUCCESS; } -static enum sci_status scic_sds_port_ready_substate_add_phy_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - enum sci_status status; - - status = scic_sds_port_set_phy(sci_port, sci_phy); - - if (status != SCI_SUCCESS) - return status; - - scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); - sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; - port_state_machine_change(sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); - - return status; -} - - -static enum sci_status scic_sds_port_ready_substate_remove_phy_handler(struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - enum sci_status status; - - status = scic_sds_port_clear_phy(port, phy); - - if (status != SCI_SUCCESS) - return status; - - scic_sds_port_deactivate_phy(port, phy, true); - - port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; - - port_state_machine_change(port, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); - return status; -} - -/* - * **************************************************************************** - * * READY SUBSTATE WAITING HANDLERS - * **************************************************************************** */ - /** * * @sci_port: This is the struct scic_sds_port object that which has a phy that has @@ -1264,57 +1171,6 @@ static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler( return SCI_FAILURE_INVALID_STATE; } -/* - * **************************************************************************** - * * READY SUBSTATE OPERATIONAL HANDLERS - * **************************************************************************** */ - -/* - * This method will casue the port to reset. enum sci_status SCI_SUCCESS - */ -static enum -sci_status scic_sds_port_ready_operational_substate_reset_handler( - struct scic_sds_port *port, - u32 timeout) -{ - enum sci_status status = SCI_FAILURE_INVALID_PHY; - u32 phy_index; - struct scic_sds_phy *selected_phy = NULL; - - - /* Select a phy on which we can send the hard reset request. */ - for (phy_index = 0; - (phy_index < SCI_MAX_PHYS) && (selected_phy == NULL); - phy_index++) { - selected_phy = port->phy_table[phy_index]; - - if ((selected_phy != NULL) && - !scic_sds_port_active_phy(port, selected_phy)) { - /* - * We found a phy but it is not ready select - * different phy - */ - selected_phy = NULL; - } - } - - /* If we have a phy then go ahead and start the reset procedure */ - if (selected_phy != NULL) { - status = scic_sds_phy_reset(selected_phy); - - if (status == SCI_SUCCESS) { - isci_timer_start(port->timer_handle, timeout); - port->not_ready_reason = - SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; - - port_state_machine_change(port, - SCI_BASE_PORT_STATE_RESETTING); - } - } - - return status; -} - /** * scic_sds_port_ready_operational_substate_link_up_handler() - * @sci_port: This is the struct scic_sds_port object that which has a phy that has @@ -1372,61 +1228,6 @@ static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler return SCI_SUCCESS; } -/* - * **************************************************************************** - * * READY SUBSTATE OPERATIONAL HANDLERS - * **************************************************************************** */ - -/* - * This is the default method for a port add phy request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - enum sci_status status; - - status = scic_sds_port_set_phy(port, phy); - - if (status == SCI_SUCCESS) { - scic_sds_port_general_link_up_handler(port, phy, true); - - /* - * Re-enter the configuring state since this may be the last phy in - * the port. */ - port_state_machine_change(port, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); - } - - return status; -} - -/* - * This is the default method for a port remove phy request. It will report a - * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - enum sci_status status; - - status = scic_sds_port_clear_phy(port, phy); - - if (status != SCI_SUCCESS) - return status; - scic_sds_port_deactivate_phy(port, phy, true); - - /* Re-enter the configuring state since this may be the last phy in - * the port - */ - port_state_machine_change(port, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); - - return status; -} - /** * scic_sds_port_ready_configuring_substate_complete_io_handler() - * @port: This is the port that is being requested to complete the io request. @@ -1461,27 +1262,6 @@ static enum sci_status default_port_handler(struct scic_sds_port *sci_port, return SCI_FAILURE_INVALID_STATE; } -static enum sci_status -scic_sds_port_default_reset_handler(struct scic_sds_port *sci_port, - u32 timeout) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status -scic_sds_port_default_add_phy_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *base_phy) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status -scic_sds_port_default_remove_phy_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *base_phy) -{ - return default_port_handler(sci_port, __func__); -} - /* * This is the default method for a port unsolicited frame request. It will * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even @@ -1818,70 +1598,6 @@ static enum sci_status scic_sds_port_general_complete_io_handler( } /* - * This method takes the struct scic_sds_port that is in a stopped state and handles - * the add phy request. In MPC mode the only time a phy can be added to a port - * is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status - * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not - * be added to the port. SCI_SUCCESS if the phy is added to the port. - */ -static enum sci_status scic_sds_port_stopped_state_add_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - struct sci_sas_address port_sas_address; - - /* Read the port assigned SAS Address if there is one */ - scic_sds_port_get_sas_address(port, &port_sas_address); - - if (port_sas_address.high != 0 && port_sas_address.low != 0) { - struct sci_sas_address phy_sas_address; - - /* - * Make sure that the PHY SAS Address matches the SAS Address - * for this port. */ - scic_sds_phy_get_sas_address(phy, &phy_sas_address); - - if ( - (port_sas_address.high != phy_sas_address.high) - || (port_sas_address.low != phy_sas_address.low) - ) { - return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; - } - } - - return scic_sds_port_set_phy(port, phy); -} - -/* - * This method takes the struct scic_sds_port that is in a stopped state and handles - * the remove phy request. In MPC mode the only time a phy can be removed from - * a port is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status - * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not - * be added to the port. SCI_SUCCESS if the phy is added to the port. - */ -static enum sci_status scic_sds_port_stopped_state_remove_phy_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - return scic_sds_port_clear_phy(port, phy); -} - -/* - * **************************************************************************** - * * READY STATE HANDLERS - * **************************************************************************** */ - -/* - * **************************************************************************** - * * RESETTING STATE HANDLERS - * **************************************************************************** */ - -/* - * **************************************************************************** - * * STOPPING STATE HANDLERS - * **************************************************************************** */ - -/* * This method takes the struct scic_sds_port that is in a stopping state and handles * the complete io request. Should the request count reach 0 then the port * object will transition to the stopped state. enum sci_status SCI_SUCCESS @@ -2044,11 +1760,171 @@ enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port) } } +static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 timeout) +{ + enum sci_status status = SCI_FAILURE_INVALID_PHY; + struct scic_sds_phy *selected_phy = NULL; + enum scic_sds_port_states state; + u32 phy_index; + + state = sci_port->state_machine.current_state_id; + if (state != SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL) { + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + /* Select a phy on which we can send the hard reset request. */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS && !selected_phy; phy_index++) { + selected_phy = sci_port->phy_table[phy_index]; + if (selected_phy && + !scic_sds_port_active_phy(sci_port, selected_phy)) { + /* + * We found a phy but it is not ready select + * different phy + */ + selected_phy = NULL; + } + } + + /* If we have a phy then go ahead and start the reset procedure */ + if (!selected_phy) + return status; + status = scic_sds_phy_reset(selected_phy); + + if (status != SCI_SUCCESS) + return status; + + isci_timer_start(sci_port->timer_handle, timeout); + sci_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; + + port_state_machine_change(sci_port, + SCI_BASE_PORT_STATE_RESETTING); + return SCI_SUCCESS; +} + +/** + * scic_sds_port_add_phy() - + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. + * + * This method will add a PHY to the selected port. This method returns an + * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other + * status is a failure to add the phy to the port. + */ +enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + enum sci_status status; + enum scic_sds_port_states state; + + state = sci_port->state_machine.current_state_id; + switch (state) { + case SCI_BASE_PORT_STATE_STOPPED: { + struct sci_sas_address port_sas_address; + + /* Read the port assigned SAS Address if there is one */ + scic_sds_port_get_sas_address(sci_port, &port_sas_address); + + if (port_sas_address.high != 0 && port_sas_address.low != 0) { + struct sci_sas_address phy_sas_address; + + /* Make sure that the PHY SAS Address matches the SAS Address + * for this port + */ + scic_sds_phy_get_sas_address(sci_phy, &phy_sas_address); + + if (port_sas_address.high != phy_sas_address.high || + port_sas_address.low != phy_sas_address.low) + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + return scic_sds_port_set_phy(sci_port, sci_phy); + } + case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: + case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + status = scic_sds_port_set_phy(sci_port, sci_phy); + + if (status != SCI_SUCCESS) + return status; + + scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); + sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + + return status; + case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + status = scic_sds_port_set_phy(sci_port, sci_phy); + + if (status != SCI_SUCCESS) + return status; + scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); + + /* Re-enter the configuring state since this may be the last phy in + * the port. + */ + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +/** + * scic_sds_port_remove_phy() - + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. + * + * This method will remove the PHY from the selected PORT. This method returns + * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any + * other status is a failure to add the phy to the port. + */ +enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + enum sci_status status; + enum scic_sds_port_states state; + + state = sci_port->state_machine.current_state_id; + + switch (state) { + case SCI_BASE_PORT_STATE_STOPPED: + return scic_sds_port_clear_phy(sci_port, sci_phy); + case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + status = scic_sds_port_clear_phy(sci_port, sci_phy); + if (status != SCI_SUCCESS) + return status; + + scic_sds_port_deactivate_phy(sci_port, sci_phy, true); + sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + return SCI_SUCCESS; + case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + status = scic_sds_port_clear_phy(sci_port, sci_phy); + + if (status != SCI_SUCCESS) + return status; + scic_sds_port_deactivate_phy(sci_port, sci_phy, true); + + /* Re-enter the configuring state since this may be the last phy in + * the port + */ + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = { [SCI_BASE_PORT_STATE_STOPPED] = { - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_stopped_state_add_phy_handler, - .remove_phy_handler = scic_sds_port_stopped_state_remove_phy_handler, .frame_handler = scic_sds_port_default_frame_handler, .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, @@ -2057,9 +1933,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_default_complete_io_handler }, [SCI_BASE_PORT_STATE_STOPPING] = { - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_default_add_phy_handler, - .remove_phy_handler = scic_sds_port_default_remove_phy_handler, .frame_handler = scic_sds_port_default_frame_handler, .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, @@ -2068,9 +1941,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_stopping_state_complete_io_handler }, [SCI_BASE_PORT_STATE_READY] = { - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_default_add_phy_handler, - .remove_phy_handler = scic_sds_port_default_remove_phy_handler, .frame_handler = scic_sds_port_default_frame_handler, .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, @@ -2079,9 +1949,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, - .remove_phy_handler = scic_sds_port_default_remove_phy_handler, .frame_handler = scic_sds_port_default_frame_handler, .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_ready_waiting_substate_link_up_handler, @@ -2090,9 +1957,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .reset_handler = scic_sds_port_ready_operational_substate_reset_handler, - .add_phy_handler = scic_sds_port_ready_substate_add_phy_handler, - .remove_phy_handler = scic_sds_port_ready_substate_remove_phy_handler, .frame_handler = scic_sds_port_default_frame_handler, .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_ready_operational_substate_link_up_handler, @@ -2101,9 +1965,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_ready_configuring_substate_add_phy_handler, - .remove_phy_handler = scic_sds_port_ready_configuring_substate_remove_phy_handler, .frame_handler = scic_sds_port_default_frame_handler, .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, @@ -2112,9 +1973,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler }, [SCI_BASE_PORT_STATE_RESETTING] = { - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_default_add_phy_handler, - .remove_phy_handler = scic_sds_port_default_remove_phy_handler, .frame_handler = scic_sds_port_default_frame_handler, .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_reset_state_link_up_handler, @@ -2123,9 +1981,6 @@ static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCI_BASE_PORT_STATE_FAILED] = { - .reset_handler = scic_sds_port_default_reset_handler, - .add_phy_handler = scic_sds_port_default_add_phy_handler, - .remove_phy_handler = scic_sds_port_default_remove_phy_handler, .frame_handler = scic_sds_port_default_frame_handler, .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 7016371..326279a 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -312,24 +312,6 @@ typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_po struct scic_sds_request *); struct scic_sds_port_state_handler { - /** - * The reset_handler specifies the method invoked when a user - * attempts to hard reset a port. - */ - scic_sds_port_reset_handler_t reset_handler; - - /** - * The add_phy_handler specifies the method invoked when a user - * attempts to add another phy into the port. - */ - scic_sds_port_phy_handler_t add_phy_handler; - - /** - * The remove_phy_handler specifies the method invoked when a user - * attempts to remove a phy from the port. - */ - scic_sds_port_phy_handler_t remove_phy_handler; - scic_sds_port_frame_handler_t frame_handler; scic_sds_port_event_handler_t event_handler; @@ -338,7 +320,6 @@ struct scic_sds_port_state_handler { scic_sds_port_io_request_handler_t start_io_handler; scic_sds_port_io_request_handler_t complete_io_handler; - }; /** -- cgit v0.10.2 From 13721e186fd31cd8475e635a89383853871fdbf1 Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Thu, 12 May 2011 19:10:08 +0000 Subject: isci: remove port frame and event handlers Unused infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Piotr Sawicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 5501e14..d58001c 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1262,30 +1262,6 @@ static enum sci_status default_port_handler(struct scic_sds_port *sci_port, return SCI_FAILURE_INVALID_STATE; } -/* - * This is the default method for a port unsolicited frame request. It will - * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even - * possible to receive an unsolicited frame directed to a port object? It - * seems possible if we implementing virtual functions but until then? - */ -static enum sci_status -scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port, - u32 frame_index) -{ - struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - - default_port_handler(sci_port, __func__); - scic_sds_controller_release_frame(scic, frame_index); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port, - u32 event_code) -{ - return default_port_handler(sci_port, __func__); -} - static void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy) { @@ -1925,64 +1901,48 @@ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = { [SCI_BASE_PORT_STATE_STOPPED] = { - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_default_complete_io_handler }, [SCI_BASE_PORT_STATE_STOPPING] = { - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_stopping_state_complete_io_handler }, [SCI_BASE_PORT_STATE_READY] = { - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_ready_waiting_substate_link_up_handler, .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_ready_waiting_substate_start_io_handler, .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_ready_operational_substate_link_up_handler, .link_down_handler = scic_sds_port_ready_operational_substate_link_down_handler, .start_io_handler = scic_sds_port_ready_operational_substate_start_io_handler, .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler }, [SCI_BASE_PORT_STATE_RESETTING] = { - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_reset_state_link_up_handler, .link_down_handler = scic_sds_port_reset_state_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCI_BASE_PORT_STATE_FAILED] = { - .frame_handler = scic_sds_port_default_frame_handler, - .event_handler = scic_sds_port_default_event_handler, .link_up_handler = scic_sds_port_default_link_up_handler, .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 326279a..20f9926 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -312,9 +312,6 @@ typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_po struct scic_sds_request *); struct scic_sds_port_state_handler { - scic_sds_port_frame_handler_t frame_handler; - scic_sds_port_event_handler_t event_handler; - scic_sds_port_link_handler_t link_up_handler; scic_sds_port_link_handler_t link_down_handler; -- cgit v0.10.2 From 051266caaeb15719553c5316e3d43b533d3cd5a0 Mon Sep 17 00:00:00 2001 From: Piotr Sawicki Date: Thu, 12 May 2011 19:10:14 +0000 Subject: isci: unify port link_up and link_down handlers Unify the handlers and kill the state handler implementations. Reported-by: Christoph Hellwig Signed-off-by: Piotr Sawicki Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index d58001c..61ba37d 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -929,36 +929,6 @@ bool scic_sds_port_link_detected( } /** - * This method is the entry point for the phy to inform the port that it is now - * in a ready state - * @sci_port: - * - * - */ -void scic_sds_port_link_up( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - sci_phy->is_in_link_training = false; - - sci_port->state_handlers->link_up_handler(sci_port, sci_phy); -} - -/** - * This method is the entry point for the phy to inform the port that it is no - * longer in a ready state - * @sci_port: - * - * - */ -void scic_sds_port_link_down( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - sci_port->state_handlers->link_down_handler(sci_port, sci_phy); -} - -/** * This method is called to start an IO request on this port. * @sci_port: * @sci_dev: @@ -1135,29 +1105,6 @@ static enum sci_status scic_sds_port_ready_substate_complete_io_handler( return SCI_SUCCESS; } -/** - * - * @sci_port: This is the struct scic_sds_port object that which has a phy that has - * gone link up. - * @sci_phy: This is the struct scic_sds_phy object that has gone link up. - * - * This method is the ready waiting substate link up handler for the - * struct scic_sds_port object. This methos will report the link up condition for - * this port and will transition to the ready operational substate. none - */ -static void scic_sds_port_ready_waiting_substate_link_up_handler( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - /* - * Since this is the first phy going link up for the port we can just enable - * it and continue. */ - scic_sds_port_activate_phy(sci_port, sci_phy, true); - - port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); -} - /* * This method is the ready waiting substate start io handler for the * struct scic_sds_port object. The port object can not accept new requests so the @@ -1171,49 +1118,6 @@ static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler( return SCI_FAILURE_INVALID_STATE; } -/** - * scic_sds_port_ready_operational_substate_link_up_handler() - - * @sci_port: This is the struct scic_sds_port object that which has a phy that has - * gone link up. - * @sci_phy: This is the struct scic_sds_phy object that has gone link up. - * - * This method is the ready operational substate link up handler for the - * struct scic_sds_port object. This function notifies the SCI User that the phy has - * gone link up. none - */ -static void scic_sds_port_ready_operational_substate_link_up_handler( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); -} - -/** - * scic_sds_port_ready_operational_substate_link_down_handler() - - * @sci_port: This is the struct scic_sds_port object that which has a phy that has - * gone link down. - * @sci_phy: This is the struct scic_sds_phy object that has gone link down. - * - * This method is the ready operational substate link down handler for the - * struct scic_sds_port object. This function notifies the SCI User that the phy has - * gone link down and if this is the last phy in the port the port will change - * state to the ready waiting substate. none - */ -static void scic_sds_port_ready_operational_substate_link_down_handler( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - scic_sds_port_deactivate_phy(sci_port, sci_phy, true); - - /* - * If there are no active phys left in the port, then transition - * the port to the WAITING state until such time as a phy goes - * link up. */ - if (sci_port->active_phy_mask == 0) - port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); -} - /* * This method is the ready operational substate start io handler for the * struct scic_sds_port object. This function incremetns the outstanding request @@ -1262,18 +1166,6 @@ static enum sci_status default_port_handler(struct scic_sds_port *sci_port, return SCI_FAILURE_INVALID_STATE; } -static void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - default_port_handler(sci_port, __func__); -} - -static void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - default_port_handler(sci_port, __func__); -} - static enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) @@ -1592,51 +1484,6 @@ static enum sci_status scic_sds_port_stopping_state_complete_io_handler( return SCI_SUCCESS; } -/* - * **************************************************************************** - * * RESETTING STATE HANDLERS - * **************************************************************************** */ - -/* - * This method will transition a failed port to its ready state. The port - * failed because a hard reset request timed out but at some time later one or - * more phys in the port became ready. enum sci_status SCI_SUCCESS - */ -static void scic_sds_port_reset_state_link_up_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - /* - * / @todo We should make sure that the phy that has gone link up is the same - * / one on which we sent the reset. It is possible that the phy on - * / which we sent the reset is not the one that has gone link up and we - * / want to make sure that phy being reset comes back. Consider the - * / case where a reset is sent but before the hardware processes the - * / reset it get a link up on the port because of a hot plug event. - * / because of the reset request this phy will go link down almost - * / immediately. */ - - /* - * In the resetting state we don't notify the user regarding - * link up and link down notifications. */ - scic_sds_port_general_link_up_handler(port, phy, false); -} - -/* - * This method process link down notifications that occur during a port reset - * operation. Link downs can occur during the reset operation. enum sci_status - * SCI_SUCCESS - */ -static void scic_sds_port_reset_state_link_down_handler( - struct scic_sds_port *port, - struct scic_sds_phy *phy) -{ - /* - * In the resetting state we don't notify the user regarding - * link up and link down notifications. */ - scic_sds_port_deactivate_phy(port, phy, false); -} - enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; @@ -1890,7 +1737,79 @@ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, */ port_state_machine_change(sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} +enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + enum scic_sds_port_states state; + + state = sci_port->state_machine.current_state_id; + switch (state) { + case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: + /* Since this is the first phy going link up for the port we + * can just enable it and continue + */ + scic_sds_port_activate_phy(sci_port, sci_phy, true); + + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); + return SCI_SUCCESS; + case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); + return SCI_SUCCESS; + case SCI_BASE_PORT_STATE_RESETTING: + /* TODO We should make sure that the phy that has gone + * link up is the same one on which we sent the reset. It is + * possible that the phy on which we sent the reset is not the + * one that has gone link up and we want to make sure that + * phy being reset comes back. Consider the case where a + * reset is sent but before the hardware processes the reset it + * get a link up on the port because of a hot plug event. + * because of the reset request this phy will go link down + * almost immediately. + */ + + /* In the resetting state we don't notify the user regarding + * link up and link down notifications. + */ + scic_sds_port_general_link_up_handler(sci_port, sci_phy, false); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + enum scic_sds_port_states state; + + state = sci_port->state_machine.current_state_id; + switch (state) { + case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + scic_sds_port_deactivate_phy(sci_port, sci_phy, true); + + /* If there are no active phys left in the port, then + * transition the port to the WAITING state until such time + * as a phy goes link up + */ + if (sci_port->active_phy_mask == 0) + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + return SCI_SUCCESS; + case SCI_BASE_PORT_STATE_RESETTING: + /* In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + scic_sds_port_deactivate_phy(sci_port, sci_phy, false); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(sci_port), @@ -1901,50 +1820,34 @@ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = { [SCI_BASE_PORT_STATE_STOPPED] = { - .link_up_handler = scic_sds_port_default_link_up_handler, - .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_default_complete_io_handler }, [SCI_BASE_PORT_STATE_STOPPING] = { - .link_up_handler = scic_sds_port_default_link_up_handler, - .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_stopping_state_complete_io_handler }, [SCI_BASE_PORT_STATE_READY] = { - .link_up_handler = scic_sds_port_default_link_up_handler, - .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .link_up_handler = scic_sds_port_ready_waiting_substate_link_up_handler, - .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_ready_waiting_substate_start_io_handler, .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .link_up_handler = scic_sds_port_ready_operational_substate_link_up_handler, - .link_down_handler = scic_sds_port_ready_operational_substate_link_down_handler, .start_io_handler = scic_sds_port_ready_operational_substate_start_io_handler, .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, }, [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .link_up_handler = scic_sds_port_default_link_up_handler, - .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler }, [SCI_BASE_PORT_STATE_RESETTING] = { - .link_up_handler = scic_sds_port_reset_state_link_up_handler, - .link_down_handler = scic_sds_port_reset_state_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_general_complete_io_handler }, [SCI_BASE_PORT_STATE_FAILED] = { - .link_up_handler = scic_sds_port_default_link_up_handler, - .link_down_handler = scic_sds_port_default_link_down_handler, .start_io_handler = scic_sds_port_default_start_io_handler, .complete_io_handler = scic_sds_port_general_complete_io_handler } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 20f9926..bbce0ec 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -312,9 +312,6 @@ typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_po struct scic_sds_request *); struct scic_sds_port_state_handler { - scic_sds_port_link_handler_t link_up_handler; - scic_sds_port_link_handler_t link_down_handler; - scic_sds_port_io_request_handler_t start_io_handler; scic_sds_port_io_request_handler_t complete_io_handler; }; @@ -402,13 +399,10 @@ bool scic_sds_port_link_detected( struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy); -void scic_sds_port_link_up( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); - -void scic_sds_port_link_down( - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); +enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); +enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy); enum sci_status scic_sds_port_start_io( struct scic_sds_port *sci_port, -- cgit v0.10.2 From 6813820c7b892e1a5c2306808a5ccc8a27b7946d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 07:16:06 -0700 Subject: isci: unify port start_io and complete_io handlers Unify the handlers and kill the state handler infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 61ba37d..f43c1f6 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -61,8 +61,6 @@ #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) #define SCU_DUMMY_INDEX (0xFFFF) -static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[]; - static void isci_port_change_state(struct isci_port *iport, enum isci_status status) { unsigned long flags; @@ -929,40 +927,6 @@ bool scic_sds_port_link_detected( } /** - * This method is called to start an IO request on this port. - * @sci_port: - * @sci_dev: - * @sci_req: - * - * enum sci_status - */ -enum sci_status scic_sds_port_start_io( - struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return sci_port->state_handlers->start_io_handler( - sci_port, sci_dev, sci_req); -} - -/** - * This method is called to complete an IO request to the port. - * @sci_port: - * @sci_dev: - * @sci_req: - * - * enum sci_status - */ -enum sci_status scic_sds_port_complete_io( - struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return sci_port->state_handlers->complete_io_handler( - sci_port, sci_dev, sci_req); -} - -/** * This method is provided to timeout requests for port operations. Mostly its * for the port reset operation. * @@ -1085,106 +1049,6 @@ static void scic_port_enable_broadcast_change_notification(struct scic_sds_port } } -/* - * **************************************************************************** - * * READY SUBSTATE HANDLERS - * **************************************************************************** */ - -/* - * This method is the general ready substate complete io handler for the - * struct scic_sds_port object. This function decrments the outstanding request count - * for this port object. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_ready_substate_complete_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - scic_sds_port_decrement_request_count(port); - - return SCI_SUCCESS; -} - -/* - * This method is the ready waiting substate start io handler for the - * struct scic_sds_port object. The port object can not accept new requests so the - * request is failed. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - return SCI_FAILURE_INVALID_STATE; -} - -/* - * This method is the ready operational substate start io handler for the - * struct scic_sds_port object. This function incremetns the outstanding request - * count for this port object. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - port->started_request_count++; - return SCI_SUCCESS; -} - -/** - * scic_sds_port_ready_configuring_substate_complete_io_handler() - - * @port: This is the port that is being requested to complete the io request. - * @device: This is the device on which the io is completing. - * - * This method will decrement the outstanding request count for this port. If - * the request count goes to 0 then the port can be reprogrammed with its new - * phy data. - */ -static enum sci_status -scic_sds_port_ready_configuring_substate_complete_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - scic_sds_port_decrement_request_count(port); - - if (port->started_request_count == 0) { - port_state_machine_change(port, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); - } - - return SCI_SUCCESS; -} - -static enum sci_status default_port_handler(struct scic_sds_port *sci_port, - const char *func) -{ - dev_warn(sciport_to_dev(sci_port), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&sci_port->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return default_port_handler(sci_port, __func__); -} - -static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) -{ - return default_port_handler(sci_port, __func__); -} - -/* - * ****************************************************************************** - * * PORT STATE PRIVATE METHODS - * ****************************************************************************** */ - /** * * @sci_port: This is the struct scic_sds_port object to suspend. @@ -1269,28 +1133,10 @@ scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) writel(pts_control_value, &port->port_task_scheduler_registers->control); } -/* - * ****************************************************************************** - * * PORT READY SUBSTATE METHODS - * ****************************************************************************** */ - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCIC_SDS_PORT_READY_SUBSTATE_WAITING. This function checks the - * port for any ready phys. If there is at least one phy in a ready state then - * the port transitions to the ready operational substate. none - */ static void scic_sds_port_ready_substate_waiting_enter(void *object) { struct scic_sds_port *sci_port = object; - scic_sds_port_set_base_state_handlers( - sci_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING - ); - scic_sds_port_suspend_port_task_scheduler(sci_port); sci_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; @@ -1302,15 +1148,6 @@ static void scic_sds_port_ready_substate_waiting_enter(void *object) } } -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This function will perform the actions required by the struct scic_sds_port - * on entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets - * the state handlers for the port object, notifies the SCI User that the port - * is ready, and resumes port operations. none - */ static void scic_sds_port_ready_substate_operational_enter(void *object) { u32 index; @@ -1319,10 +1156,6 @@ static void scic_sds_port_ready_substate_operational_enter(void *object) struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); - scic_sds_port_set_base_state_handlers( - sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); - isci_port_ready(ihost, iport); for (index = 0; index < SCI_MAX_PHYS; index++) { @@ -1397,19 +1230,6 @@ static void scic_sds_port_ready_substate_operational_exit(void *object) scic_sds_port_invalidate_dummy_remote_node(sci_port); } -/* - * ****************************************************************************** - * * PORT READY CONFIGURING METHODS - * ****************************************************************************** */ - -/** - * scic_sds_port_ready_substate_configuring_enter() - - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports - * the port not ready and suspends the port task scheduler. none - */ static void scic_sds_port_ready_substate_configuring_enter(void *object) { struct scic_sds_port *sci_port = object; @@ -1417,10 +1237,6 @@ static void scic_sds_port_ready_substate_configuring_enter(void *object) struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); - scic_sds_port_set_base_state_handlers( - sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); - if (sci_port->active_phy_mask == 0) { isci_port_not_ready(ihost, iport); @@ -1440,50 +1256,6 @@ static void scic_sds_port_ready_substate_configuring_exit(void *object) scic_sds_port_invalidate_dummy_remote_node(sci_port); } -/* --------------------------------------------------------------------------- */ - -/** - * - * @port: This is the struct scic_sds_port object on which the io request count will - * be decremented. - * @device: This is the struct scic_sds_remote_device object to which the io request - * is being directed. This parameter is not required to complete this - * operation. - * @io_request: This is the request that is being completed on this port - * object. This parameter is not required to complete this operation. - * - * This is a general complete io request handler for the struct scic_sds_port object. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_general_complete_io_handler( - struct scic_sds_port *port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - scic_sds_port_decrement_request_count(port); - - return SCI_SUCCESS; -} - -/* - * This method takes the struct scic_sds_port that is in a stopping state and handles - * the complete io request. Should the request count reach 0 then the port - * object will transition to the stopped state. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_port_stopping_state_complete_io_handler( - struct scic_sds_port *sci_port, - struct scic_sds_remote_device *device, - struct scic_sds_request *io_request) -{ - scic_sds_port_decrement_request_count(sci_port); - - if (sci_port->started_request_count == 0) - port_state_machine_change(sci_port, - SCI_BASE_PORT_STATE_STOPPED); - - return SCI_SUCCESS; -} - enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; @@ -1818,45 +1590,62 @@ enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, } } -static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = { - [SCI_BASE_PORT_STATE_STOPPED] = { - .start_io_handler = scic_sds_port_default_start_io_handler, - .complete_io_handler = scic_sds_port_default_complete_io_handler - }, - [SCI_BASE_PORT_STATE_STOPPING] = { - .start_io_handler = scic_sds_port_default_start_io_handler, - .complete_io_handler = scic_sds_port_stopping_state_complete_io_handler - }, - [SCI_BASE_PORT_STATE_READY] = { - .start_io_handler = scic_sds_port_default_start_io_handler, - .complete_io_handler = scic_sds_port_general_complete_io_handler - }, - [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { - .start_io_handler = scic_sds_port_ready_waiting_substate_start_io_handler, - .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, - }, - [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { - .start_io_handler = scic_sds_port_ready_operational_substate_start_io_handler, - .complete_io_handler = scic_sds_port_ready_substate_complete_io_handler, - }, - [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { - .start_io_handler = scic_sds_port_default_start_io_handler, - .complete_io_handler = scic_sds_port_ready_configuring_substate_complete_io_handler - }, - [SCI_BASE_PORT_STATE_RESETTING] = { - .start_io_handler = scic_sds_port_default_start_io_handler, - .complete_io_handler = scic_sds_port_general_complete_io_handler - }, - [SCI_BASE_PORT_STATE_FAILED] = { - .start_io_handler = scic_sds_port_default_start_io_handler, - .complete_io_handler = scic_sds_port_general_complete_io_handler +enum sci_status scic_sds_port_start_io(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + enum scic_sds_port_states state; + + state = sci_port->state_machine.current_state_id; + switch (state) { + case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: + return SCI_FAILURE_INVALID_STATE; + case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + sci_port->started_request_count++; + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; } -}; +} -/* - * ****************************************************************************** - * * PORT STATE PRIVATE METHODS - * ****************************************************************************** */ +enum sci_status scic_sds_port_complete_io(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req) +{ + enum scic_sds_port_states state; + + state = sci_port->state_machine.current_state_id; + switch (state) { + case SCI_BASE_PORT_STATE_STOPPED: + dev_warn(sciport_to_dev(sci_port), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_BASE_PORT_STATE_STOPPING: + scic_sds_port_decrement_request_count(sci_port); + + if (sci_port->started_request_count == 0) + port_state_machine_change(sci_port, + SCI_BASE_PORT_STATE_STOPPED); + break; + case SCI_BASE_PORT_STATE_READY: + case SCI_BASE_PORT_STATE_RESETTING: + case SCI_BASE_PORT_STATE_FAILED: + case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: + case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + scic_sds_port_decrement_request_count(sci_port); + break; + case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + scic_sds_port_decrement_request_count(sci_port); + if (sci_port->started_request_count == 0) { + port_state_machine_change(sci_port, + SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); + } + break; + } + return SCI_SUCCESS; +} /** * @@ -1921,32 +1710,11 @@ static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) scic_sds_controller_post_request(scic, command); } -/* - * ****************************************************************************** - * * PORT STATE METHODS - * ****************************************************************************** */ - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_STOPPED. This function sets the stopped - * state handlers for the struct scic_sds_port object and disables the port task - * scheduler in the hardware. none - */ static void scic_sds_port_stopped_state_enter(void *object) { struct scic_sds_port *sci_port = object; - scic_sds_port_set_base_state_handlers( - sci_port, SCI_BASE_PORT_STATE_STOPPED - ); - - if ( - SCI_BASE_PORT_STATE_STOPPING - == sci_port->state_machine.previous_state_id - ) { + if (sci_port->state_machine.previous_state_id == SCI_BASE_PORT_STATE_STOPPING) { /* * If we enter this state becasuse of a request to stop * the port then we want to disable the hardwares port @@ -1955,14 +1723,6 @@ static void scic_sds_port_stopped_state_enter(void *object) } } -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * exiting the SCI_BASE_STATE_STOPPED. This function enables the SCU hardware - * port task scheduler. none - */ static void scic_sds_port_stopped_state_exit(void *object) { struct scic_sds_port *sci_port = object; @@ -1971,15 +1731,6 @@ static void scic_sds_port_stopped_state_exit(void *object) scic_sds_port_enable_port_task_scheduler(sci_port); } -/** - * scic_sds_port_ready_state_enter - - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state - * handlers for the struct scic_sds_port object, reports the port object as - * not ready and starts the ready substate machine. none - */ static void scic_sds_port_ready_state_enter(void *object) { struct scic_sds_port *sci_port = object; @@ -1988,9 +1739,6 @@ static void scic_sds_port_ready_state_enter(void *object) struct isci_port *iport = sci_port_to_iport(sci_port); u32 prev_state; - /* Put the ready state handlers in place though they will not be there long */ - scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY); - prev_state = sci_port->state_machine.previous_state_id; if (prev_state == SCI_BASE_PORT_STATE_RESETTING) isci_port_hard_reset_complete(iport, SCI_SUCCESS); @@ -2005,66 +1753,14 @@ static void scic_sds_port_ready_state_enter(void *object) SCIC_SDS_PORT_READY_SUBSTATE_WAITING); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_RESETTING. This function sets the resetting - * state handlers for the struct scic_sds_port object. none - */ -static void scic_sds_port_resetting_state_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - - scic_sds_port_set_base_state_handlers( - sci_port, SCI_BASE_PORT_STATE_RESETTING - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This function will perform the actions required by the - * struct scic_sds_port on - * exiting the SCI_BASE_STATE_RESETTING. This function does nothing. none - */ -static inline void scic_sds_port_resetting_state_exit(void *object) +static void scic_sds_port_resetting_state_exit(void *object) { struct scic_sds_port *sci_port = object; isci_timer_stop(sci_port->timer_handle); } -/** - * - * @object: This is the void object which is cast to a - * struct scic_sds_port object. - * - * This method will perform the actions required by the struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping - * state handlers for the struct scic_sds_port object. none - */ -static void scic_sds_port_stopping_state_enter(void *object) -{ - struct scic_sds_port *sci_port = object; - - scic_sds_port_set_base_state_handlers( - sci_port, SCI_BASE_PORT_STATE_STOPPING - ); -} - -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This function will perform the actions required by the - * struct scic_sds_port on - * exiting the SCI_BASE_STATE_STOPPING. This function does nothing. none - */ -static inline void -scic_sds_port_stopping_state_exit(void *object) +static void scic_sds_port_stopping_state_exit(void *object) { struct scic_sds_port *sci_port = object; @@ -2073,23 +1769,11 @@ scic_sds_port_stopping_state_exit(void *object) scic_sds_port_destroy_dummy_resources(sci_port); } -/** - * - * @object: This is the object which is cast to a struct scic_sds_port object. - * - * This function will perform the actions required by the - * struct scic_sds_port on - * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping - * state handlers for the struct scic_sds_port object. none - */ static void scic_sds_port_failed_state_enter(void *object) { struct scic_sds_port *sci_port = object; struct isci_port *iport = sci_port_to_iport(sci_port); - scic_sds_port_set_base_state_handlers(sci_port, - SCI_BASE_PORT_STATE_FAILED); - isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); } @@ -2101,7 +1785,6 @@ static const struct sci_base_state scic_sds_port_state_table[] = { .exit_state = scic_sds_port_stopped_state_exit }, [SCI_BASE_PORT_STATE_STOPPING] = { - .enter_state = scic_sds_port_stopping_state_enter, .exit_state = scic_sds_port_stopping_state_exit }, [SCI_BASE_PORT_STATE_READY] = { @@ -2119,7 +1802,6 @@ static const struct sci_base_state scic_sds_port_state_table[] = { .exit_state = scic_sds_port_ready_substate_configuring_exit }, [SCI_BASE_PORT_STATE_RESETTING] = { - .enter_state = scic_sds_port_resetting_state_enter, .exit_state = scic_sds_port_resetting_state_exit }, [SCI_BASE_PORT_STATE_FAILED] = { diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index bbce0ec..af540e5 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -145,15 +145,6 @@ struct scic_sds_port { void *timer_handle; /** - * This field points to the current set of state handlers for this port - * object. These state handlers are assigned at each enter state of - * the state machine. - */ - struct scic_sds_port_state_handler *state_handlers; - - /* / Memory mapped hardware register space */ - - /** * This field is the pointer to the port task scheduler registers * for the SCU hardware. */ @@ -286,34 +277,7 @@ enum scic_sds_port_states { */ SCI_BASE_PORT_STATE_FAILED, - SCI_BASE_PORT_MAX_STATES - -}; - -struct scic_sds_remote_device; -struct scic_sds_request; - -typedef enum sci_status (*scic_sds_port_handler_t)(struct scic_sds_port *); - -typedef enum sci_status (*scic_sds_port_phy_handler_t)(struct scic_sds_port *, - struct scic_sds_phy *); - -typedef enum sci_status (*scic_sds_port_reset_handler_t)(struct scic_sds_port *, - u32 timeout); - -typedef enum sci_status (*scic_sds_port_event_handler_t)(struct scic_sds_port *, u32); -typedef enum sci_status (*scic_sds_port_frame_handler_t)(struct scic_sds_port *, u32); - -typedef void (*scic_sds_port_link_handler_t)(struct scic_sds_port *, struct scic_sds_phy *); - -typedef enum sci_status (*scic_sds_port_io_request_handler_t)(struct scic_sds_port *, - struct scic_sds_remote_device *, - struct scic_sds_request *); - -struct scic_sds_port_state_handler { - scic_sds_port_io_request_handler_t start_io_handler; - scic_sds_port_io_request_handler_t complete_io_handler; }; /** @@ -325,23 +289,6 @@ struct scic_sds_port_state_handler { ((this_port)->owning_controller) /** - * scic_sds_port_set_base_state_handlers() - - * - * This macro will change the state handlers to those of the specified state id - */ -#define scic_sds_port_set_base_state_handlers(this_port, state_id) \ - scic_sds_port_set_state_handlers(\ - (this_port), &scic_sds_port_state_handler_table[(state_id)]) - -/** - * scic_sds_port_set_state_handlers() - - * - * Helper macro to set the port object state handlers - */ -#define scic_sds_port_set_state_handlers(this_port, handlers) \ - ((this_port)->state_handlers = (handlers)) - -/** * scic_sds_port_get_index() - * * This macro returns the physical port index for this port object @@ -404,6 +351,8 @@ enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy); +struct scic_sds_request; +struct scic_sds_remote_device; enum sci_status scic_sds_port_start_io( struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, -- cgit v0.10.2 From 338e386d12c2440e39c987d35fda403d319a79a0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 07:46:59 -0700 Subject: isci: unify rnc event handlers Unify rnc event handlers and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index aef258b..9f2407f 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -299,21 +299,6 @@ static enum sci_status scic_sds_remote_node_context_default_start_task_handler( return SCI_FAILURE; } -static enum sci_status scic_sds_remote_node_context_default_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to process " - "event 0x%x while in wrong state %d\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - /** * * @sci_rnc: The rnc for which the task request is targeted. @@ -383,41 +368,6 @@ static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler return SCI_FAILURE_INVALID_STATE; } -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_posting_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_code(event_code)) { - case SCU_EVENT_POST_RNC_COMPLETE: - status = SCI_SUCCESS; - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE - ); - break; - - default: - status = SCI_FAILURE; - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to " - "process unexpected event 0x%x while in posting " - "state\n", - __func__, - sci_rnc, - event_code); - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - static enum sci_status scic_sds_remote_node_context_invalidating_state_destruct_handler( struct scic_sds_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, @@ -430,110 +380,6 @@ static enum sci_status scic_sds_remote_node_context_invalidating_state_destruct_ return SCI_SUCCESS; } -static enum sci_status scic_sds_remote_node_context_invalidating_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { - status = SCI_SUCCESS; - - if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE - ); - } else { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE - ); - } - } else { - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - /* - * We really dont care if the hardware is going to suspend - * the device since it's being invalidated anyway */ - dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p was " - "suspeneded by hardware while being " - "invalidated.\n", - __func__, - sci_rnc); - status = SCI_SUCCESS; - break; - - default: - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p " - "requested to process event 0x%x while " - "in state %d.\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state( - &sci_rnc->state_machine)); - status = SCI_FAILURE; - break; - } - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - - -static enum sci_status scic_sds_remote_node_context_resuming_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) { - status = SCI_SUCCESS; - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE - ); - } else { - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - /* - * We really dont care if the hardware is going to suspend - * the device since it's being resumed anyway */ - dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p was " - "suspeneded by hardware while being resumed.\n", - __func__, - sci_rnc); - status = SCI_SUCCESS; - break; - - default: - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested " - "to process event 0x%x while in state %d.\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state( - &sci_rnc->state_machine)); - status = SCI_FAILURE; - break; - } - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - /** * * @sci_rnc: The remote node context object being suspended. @@ -582,53 +428,6 @@ static enum sci_status scic_sds_remote_node_context_ready_state_start_io_handler return SCI_SUCCESS; } - -static enum sci_status scic_sds_remote_node_context_ready_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TL_RNC_SUSPEND_TX: - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE - ); - - sci_rnc->suspension_code = scu_get_event_specifier(event_code); - status = SCI_SUCCESS; - break; - - case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE - ); - - sci_rnc->suspension_code = scu_get_event_specifier(event_code); - status = SCI_SUCCESS; - break; - - default: - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to " - "process event 0x%x while in state %d.\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state( - &sci_rnc->state_machine)); - - status = SCI_FAILURE; - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_handler( struct scic_sds_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, @@ -738,61 +537,13 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_start return SCI_SUCCESS; } -static enum sci_status scic_sds_remote_node_context_await_suspension_state_event_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code) -{ - enum sci_status status; - - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TL_RNC_SUSPEND_TX: - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE - ); - - sci_rnc->suspension_code = scu_get_event_specifier(event_code); - status = SCI_SUCCESS; - break; - - case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE - ); - - sci_rnc->suspension_code = scu_get_event_specifier(event_code); - status = SCI_SUCCESS; - break; - - default: - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to " - "process event 0x%x while in state %d.\n", - __func__, - sci_rnc, - event_code, - sci_base_state_machine_get_state( - &sci_rnc->state_machine)); - - status = SCI_FAILURE; - break; - } - - return status; -} - -/* --------------------------------------------------------------------------- */ - -static struct scic_sds_remote_node_context_handlers -scic_sds_remote_node_context_state_handler_table[] = { +static struct scic_sds_remote_node_context_handlers scic_sds_remote_node_context_state_handler_table[] = { [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { .destruct_handler = scic_sds_remote_node_context_default_destruct_handler, .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, .resume_handler = scic_sds_remote_node_context_initial_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, - .event_handler = scic_sds_remote_node_context_default_event_handler }, [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, @@ -800,7 +551,6 @@ scic_sds_remote_node_context_state_handler_table[] = { .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, - .event_handler = scic_sds_remote_node_context_posting_state_event_handler }, [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { .destruct_handler = scic_sds_remote_node_context_invalidating_state_destruct_handler, @@ -808,7 +558,6 @@ scic_sds_remote_node_context_state_handler_table[] = { .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, - .event_handler = scic_sds_remote_node_context_invalidating_state_event_handler }, [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, @@ -816,7 +565,6 @@ scic_sds_remote_node_context_state_handler_table[] = { .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, - .event_handler = scic_sds_remote_node_context_resuming_state_event_handler }, [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, @@ -824,7 +572,6 @@ scic_sds_remote_node_context_state_handler_table[] = { .resume_handler = scic_sds_remote_node_context_default_resume_handler, .start_io_handler = scic_sds_remote_node_context_ready_state_start_io_handler, .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, - .event_handler = scic_sds_remote_node_context_ready_state_event_handler }, [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, @@ -832,7 +579,6 @@ scic_sds_remote_node_context_state_handler_table[] = { .resume_handler = scic_sds_remote_node_context_tx_suspended_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, - .event_handler = scic_sds_remote_node_context_default_event_handler }, [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, @@ -840,7 +586,6 @@ scic_sds_remote_node_context_state_handler_table[] = { .resume_handler = scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, - .event_handler = scic_sds_remote_node_context_default_event_handler }, [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, @@ -848,7 +593,6 @@ scic_sds_remote_node_context_state_handler_table[] = { .resume_handler = scic_sds_remote_node_context_await_suspension_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_await_suspension_state_start_task_handler, - .event_handler = scic_sds_remote_node_context_await_suspension_state_event_handler } }; @@ -1172,3 +916,110 @@ void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context sci_base_state_machine_start(&rnc->state_machine); } + +enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remote_node_context *sci_rnc, + u32 event_code) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->state_machine.current_state_id; + switch (state) { + case SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_POST_RNC_COMPLETE: + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE); + break; + default: + goto out; + } + break; + case SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE: + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { + if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) + state = SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE; + else + state = SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE; + sci_base_state_machine_change_state(&sci_rnc->state_machine, + state); + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* We really dont care if the hardware is going to suspend + * the device since it's being invalidated anyway */ + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being " + "invalidated.\n", __func__, sci_rnc); + break; + default: + goto out; + } + } + break; + case SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE: + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) { + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE); + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* We really dont care if the hardware is going to suspend + * the device since it's being resumed anyway */ + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being resumed.\n", + __func__, sci_rnc); + break; + default: + goto out; + } + } + break; + case SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE: + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + default: + goto out; + } + break; + case SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE: + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + default: + goto out; + } + break; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + return SCI_SUCCESS; + + out: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: code: %#x state: %d\n", __func__, event_code, state); + return SCI_FAILURE; + +} diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index a763468..fb93f09 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -102,11 +102,6 @@ typedef enum sci_status (*scic_sds_remote_node_context_io_request)( struct scic_sds_request *sci_req ); -typedef enum sci_status (*scic_sds_remote_node_context_event_handler)( - struct scic_sds_remote_node_context *sci_rnc, - u32 event_code - ); - struct scic_sds_remote_node_context_handlers { /** * This handle is invoked to stop the RNC. The callback is invoked when after @@ -138,12 +133,6 @@ struct scic_sds_remote_node_context_handlers { * operation. */ scic_sds_remote_node_context_io_request start_task_handler; - - /** - * This handler is invoked where there is an RNC event that must be processed. - */ - scic_sds_remote_node_context_event_handler event_handler; - }; /** @@ -271,8 +260,9 @@ bool scic_sds_remote_node_context_is_ready( #define scic_sds_remote_node_context_get_remote_node_index(rcn) \ ((rnc)->remote_node_index) -#define scic_sds_remote_node_context_event_handler(rnc, event_code) \ - ((rnc)->state_handlers->event_handler(rnc, event_code)) + +enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remote_node_context *sci_rnc, + u32 event_code); #define scic_sds_remote_node_context_resume(rnc, callback, parameter) \ ((rnc)->state_handlers->resume_handler(rnc, callback, parameter)) -- cgit v0.10.2 From c845ae96bcb1625a093003248ffaf13b92a81ac2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 08:26:56 -0700 Subject: isci: unify rnc destruct handlers Unify rnc destruct handlers and delete the state handler. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 9f2407f..769a3fc 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -218,26 +218,6 @@ static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( return SCI_FAILURE_INVALID_STATE; } -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_default_destruct_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to stop while " - "in unexpected state %d\n", - __func__, - sci_rnc, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - /* - * We have decided that the destruct request on the remote node context can not fail - * since it is either in the initial/destroyed state or is can be destroyed. */ - return SCI_SUCCESS; -} - static enum sci_status scic_sds_remote_node_context_default_suspend_handler( struct scic_sds_remote_node_context *sci_rnc, u32 suspend_type, @@ -315,36 +295,6 @@ static enum sci_status scic_sds_remote_node_context_success_start_task_handler( return SCI_SUCCESS; } -/** - * - * @sci_rnc: - * @callback: - * @callback_parameter: - * - * This method handles destruct calls from the various state handlers. The - * remote node context can be requested to destroy from any state. If there was - * a user callback it is always replaced with the request to destroy user - * callback. enum sci_status - */ -static enum sci_status scic_sds_remote_node_context_general_destruct_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - scic_sds_remote_node_context_setup_to_destory( - sci_rnc, callback, callback_parameter - ); - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ); - - return SCI_SUCCESS; -} - -/* --------------------------------------------------------------------------- */ - static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler( struct scic_sds_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, @@ -368,18 +318,6 @@ static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler return SCI_FAILURE_INVALID_STATE; } -static enum sci_status scic_sds_remote_node_context_invalidating_state_destruct_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - scic_sds_remote_node_context_setup_to_destory( - sci_rnc, callback, callback_parameter - ); - - return SCI_SUCCESS; -} - /** * * @sci_rnc: The remote node context object being suspended. @@ -539,56 +477,48 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_start static struct scic_sds_remote_node_context_handlers scic_sds_remote_node_context_state_handler_table[] = { [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { - .destruct_handler = scic_sds_remote_node_context_default_destruct_handler, .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, .resume_handler = scic_sds_remote_node_context_initial_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { - .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { - .destruct_handler = scic_sds_remote_node_context_invalidating_state_destruct_handler, .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { - .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { - .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, .suspend_handler = scic_sds_remote_node_context_ready_state_suspend_handler, .resume_handler = scic_sds_remote_node_context_default_resume_handler, .start_io_handler = scic_sds_remote_node_context_ready_state_start_io_handler, .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { - .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, .resume_handler = scic_sds_remote_node_context_tx_suspended_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { - .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, .resume_handler = scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { - .destruct_handler = scic_sds_remote_node_context_general_destruct_handler, .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, .resume_handler = scic_sds_remote_node_context_await_suspension_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, @@ -1023,3 +953,39 @@ enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remot return SCI_FAILURE; } + +enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->state_machine.current_state_id; + switch (state) { + case SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE: + scic_sds_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); + return SCI_SUCCESS; + case SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE: + scic_sds_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE); + return SCI_SUCCESS; + case SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + /* We have decided that the destruct request on the remote node context + * can not fail since it is either in the initial/destroyed state or is + * can be destroyed. + */ + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index fb93f09..1cd3234 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -104,12 +104,6 @@ typedef enum sci_status (*scic_sds_remote_node_context_io_request)( struct scic_sds_remote_node_context_handlers { /** - * This handle is invoked to stop the RNC. The callback is invoked when after - * the hardware notification that the RNC has been invalidated. - */ - scic_sds_remote_node_context_operation destruct_handler; - - /** * This handler is invoked when there is a request to suspend the RNC. The * callback is invoked after the hardware notification that the remote node is * suspended. @@ -260,19 +254,18 @@ bool scic_sds_remote_node_context_is_ready( #define scic_sds_remote_node_context_get_remote_node_index(rcn) \ ((rnc)->remote_node_index) - enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remote_node_context *sci_rnc, u32 event_code); +enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter); #define scic_sds_remote_node_context_resume(rnc, callback, parameter) \ ((rnc)->state_handlers->resume_handler(rnc, callback, parameter)) #define scic_sds_remote_node_context_suspend(rnc, suspend_type, callback, parameter) \ ((rnc)->state_handlers->suspend_handler(rnc, suspend_type, callback, parameter)) -#define scic_sds_remote_node_context_destruct(rnc, callback, parameter) \ - ((rnc)->state_handlers->destruct_handler(rnc, callback, parameter)) - #define scic_sds_remote_node_context_start_io(rnc, request) \ ((rnc)->state_handlers->start_io_handler(rnc, request)) -- cgit v0.10.2 From ed3efb7784cb0772558e9cc9440bd6c9a3139be4 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 08:50:23 -0700 Subject: isci: unify rnc suspend/resume handlers Unify rnc suspend/resume handlers and delete the state handlers. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 769a3fc..095d612 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -195,60 +195,6 @@ static void scic_sds_remote_node_context_setup_to_destory( sci_rnc->user_cookie = callback_parameter; } -/** - * - * @sci_rnc: - * @callback: - * - * This method will continue to resume a remote node context. This is used in - * the states where a resume is requested while a resume is in progress. - */ -static enum sci_status scic_sds_remote_node_context_continue_to_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { - sci_rnc->user_callback = callback; - sci_rnc->user_cookie = callback_parameter; - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_remote_node_context_default_suspend_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 suspend_type, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to suspend " - "while in wrong state %d\n", - __func__, - sci_rnc, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - -static enum sci_status scic_sds_remote_node_context_default_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to resume " - "while in wrong state %d\n", - __func__, - sci_rnc, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE_INVALID_STATE; -} - static enum sci_status scic_sds_remote_node_context_default_start_io_handler( struct scic_sds_remote_node_context *sci_rnc, struct scic_sds_request *sci_req) @@ -295,61 +241,6 @@ static enum sci_status scic_sds_remote_node_context_success_start_task_handler( return SCI_SUCCESS; } -static enum sci_status scic_sds_remote_node_context_initial_state_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - if (sci_rnc->remote_node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); - - scic_sds_remote_node_context_construct_buffer(sci_rnc); - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE - ); - - return SCI_SUCCESS; - } - - return SCI_FAILURE_INVALID_STATE; -} - -/** - * - * @sci_rnc: The remote node context object being suspended. - * @callback: The callback when the suspension is complete. - * @callback_parameter: The parameter that is to be passed into the callback. - * - * This method will handle the suspend requests from the ready state. - * SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_ready_state_suspend_handler( - struct scic_sds_remote_node_context *sci_rnc, - u32 suspend_type, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - sci_rnc->user_callback = callback; - sci_rnc->user_cookie = callback_parameter; - sci_rnc->suspension_code = suspend_type; - - if (suspend_type == SCI_SOFTWARE_SUSPENSION) { - scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), - SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); - } - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE - ); - - return SCI_SUCCESS; -} - /** * * @sci_rnc: The rnc for which the io request is targeted. @@ -366,39 +257,6 @@ static enum sci_status scic_sds_remote_node_context_ready_state_start_io_handler return SCI_SUCCESS; } -static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); - struct domain_device *dev = sci_dev_to_domain(sci_dev); - enum sci_status status = SCI_SUCCESS; - - scic_sds_remote_node_context_setup_to_resume(sci_rnc, callback, - callback_parameter); - - /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ - if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); - else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { - if (sci_dev->is_direct_attached) { - /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); - } else { - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE); - } - } else - status = SCI_FAILURE; - - return status; -} - /** * * @sci_rnc: The remote node context which is to receive the task request. @@ -419,44 +277,6 @@ static enum sci_status scic_sds_remote_node_context_suspended_start_task_handler return SCI_SUCCESS; } -/* --------------------------------------------------------------------------- */ - -static enum sci_status scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); - - sci_base_state_machine_change_state( - &sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); - - return SCI_FAILURE_INVALID_STATE; -} - -/* --------------------------------------------------------------------------- */ - -/** - * - * - * - */ -static enum sci_status scic_sds_remote_node_context_await_suspension_state_resume_handler( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter) -{ - scic_sds_remote_node_context_setup_to_resume( - sci_rnc, callback, callback_parameter - ); - - return SCI_SUCCESS; -} - /** * * @sci_rnc: The remote node context which is to receive the task request. @@ -477,50 +297,34 @@ static enum sci_status scic_sds_remote_node_context_await_suspension_state_start static struct scic_sds_remote_node_context_handlers scic_sds_remote_node_context_state_handler_table[] = { [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { - .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, - .resume_handler = scic_sds_remote_node_context_initial_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { - .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, - .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { - .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, - .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { - .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, - .resume_handler = scic_sds_remote_node_context_continue_to_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { - .suspend_handler = scic_sds_remote_node_context_ready_state_suspend_handler, - .resume_handler = scic_sds_remote_node_context_default_resume_handler, .start_io_handler = scic_sds_remote_node_context_ready_state_start_io_handler, .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { - .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, - .resume_handler = scic_sds_remote_node_context_tx_suspended_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { - .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, - .resume_handler = scic_sds_remote_node_context_tx_rx_suspended_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, }, [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { - .suspend_handler = scic_sds_remote_node_context_default_suspend_handler, - .resume_handler = scic_sds_remote_node_context_await_suspension_state_resume_handler, .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, .start_task_handler = scic_sds_remote_node_context_await_suspension_state_start_task_handler, } @@ -548,21 +352,11 @@ static void scic_sds_remote_node_context_notify_user( } } -/** - * - * - * This method will continue the remote node context state machine by - * requesting to resume the remote node context state machine from its current - * state. - */ -static void scic_sds_remote_node_context_continue_state_transitions( - struct scic_sds_remote_node_context *rnc) +static void scic_sds_remote_node_context_continue_state_transitions(struct scic_sds_remote_node_context *rnc) { - if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) { - rnc->state_handlers->resume_handler( - rnc, rnc->user_callback, rnc->user_cookie - ); - } + if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) + scic_sds_remote_node_context_resume(rnc, rnc->user_callback, + rnc->user_cookie); } /** @@ -989,3 +783,95 @@ enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_nod return SCI_FAILURE_INVALID_STATE; } } + +enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node_context *sci_rnc, + u32 suspend_type, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->state_machine.current_state_id; + if (state != SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_rnc->user_callback = cb_fn; + sci_rnc->user_cookie = cb_p; + sci_rnc->suspension_code = suspend_type; + + if (suspend_type == SCI_SOFTWARE_SUSPENSION) { + scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); + } + + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE); + return SCI_SUCCESS; +} + +enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->state_machine.current_state_id; + switch (state) { + case SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE: + if (sci_rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + return SCI_FAILURE_INVALID_STATE; + + scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + scic_sds_remote_node_context_construct_buffer(sci_rnc); + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE); + return SCI_SUCCESS; + case SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE: + if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) + return SCI_FAILURE_INVALID_STATE; + + sci_rnc->user_callback = cb_fn; + sci_rnc->user_cookie = cb_p; + return SCI_SUCCESS; + case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE: { + struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); + struct domain_device *dev = sci_dev_to_domain(sci_dev); + + scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + + /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ + if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + if (sci_dev->is_direct_attached) { + /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); + } else { + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE); + } + } else + return SCI_FAILURE; + return SCI_SUCCESS; + } + case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE: + scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_base_state_machine_change_state(&sci_rnc->state_machine, + SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); + return SCI_FAILURE_INVALID_STATE; + case SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE: + scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index 1cd3234..6898374 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -90,13 +90,6 @@ typedef enum sci_status (*scic_sds_remote_node_context_operation)( void *callback_parameter ); -typedef enum sci_status (*scic_sds_remote_node_context_suspend_operation)( - struct scic_sds_remote_node_context *sci_rnc, - u32 suspension_type, - scics_sds_remote_node_context_callback callback, - void *callback_parameter - ); - typedef enum sci_status (*scic_sds_remote_node_context_io_request)( struct scic_sds_remote_node_context *sci_rnc, struct scic_sds_request *sci_req @@ -104,19 +97,6 @@ typedef enum sci_status (*scic_sds_remote_node_context_io_request)( struct scic_sds_remote_node_context_handlers { /** - * This handler is invoked when there is a request to suspend the RNC. The - * callback is invoked after the hardware notification that the remote node is - * suspended. - */ - scic_sds_remote_node_context_suspend_operation suspend_handler; - - /** - * This handler is invoked when there is a request to resume the RNC. The - * callback is invoked when after the RNC has reached the ready state. - */ - scic_sds_remote_node_context_operation resume_handler; - - /** * This handler is invoked when there is a request to start an io request * operation. */ @@ -260,11 +240,15 @@ enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remot enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, void *callback_parameter); -#define scic_sds_remote_node_context_resume(rnc, callback, parameter) \ - ((rnc)->state_handlers->resume_handler(rnc, callback, parameter)) -#define scic_sds_remote_node_context_suspend(rnc, suspend_type, callback, parameter) \ - ((rnc)->state_handlers->suspend_handler(rnc, suspend_type, callback, parameter)) +enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node_context *sci_rnc, + u32 suspend_type, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p); + +enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p); #define scic_sds_remote_node_context_start_io(rnc, request) \ ((rnc)->state_handlers->start_io_handler(rnc, request)) -- cgit v0.10.2 From f34d9e5d3f34f395a497a8747316b04ef3e865b1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 09:27:52 -0700 Subject: isci: unify rnc start{io|task} handlers Unify rnc start{io|task} handlers and delete the state handler infrastructure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 095d612..82507bd 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -176,15 +176,6 @@ static void scic_sds_remote_node_context_setup_to_resume( } } -/** - * - * @sci_rnc: - * @callback: - * @callback_parameter: - * - * This method will setup the remote node context object so it will transistion - * to its final state. none - */ static void scic_sds_remote_node_context_setup_to_destory( struct scic_sds_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, @@ -195,146 +186,6 @@ static void scic_sds_remote_node_context_setup_to_destory( sci_rnc->user_cookie = callback_parameter; } -static enum sci_status scic_sds_remote_node_context_default_start_io_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to start io " - "0x%p while in wrong state %d\n", - __func__, - sci_rnc, - sci_req, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; -} - -static enum sci_status scic_sds_remote_node_context_default_start_task_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), - "%s: SCIC Remote Node Context 0x%p requested to start " - "task 0x%p while in wrong state %d\n", - __func__, - sci_rnc, - sci_req, - sci_base_state_machine_get_state(&sci_rnc->state_machine)); - - return SCI_FAILURE; -} - -/** - * - * @sci_rnc: The rnc for which the task request is targeted. - * @sci_req: The request which is going to be started. - * - * This method determines if the task request can be started by the SCU - * hardware. When the RNC is in the ready state any task can be started. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_success_start_task_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - return SCI_SUCCESS; -} - -/** - * - * @sci_rnc: The rnc for which the io request is targeted. - * @sci_req: The request which is going to be started. - * - * This method determines if the io request can be started by the SCU hardware. - * When the RNC is in the ready state any io request can be started. enum sci_status - * SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_ready_state_start_io_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - return SCI_SUCCESS; -} - -/** - * - * @sci_rnc: The remote node context which is to receive the task request. - * @sci_req: The task request to be transmitted to to the remote target - * device. - * - * This method will report a success or failure attempt to start a new task - * request to the hardware. Since all task requests are sent on the high - * priority queue they can be sent when the RCN is in a TX suspend state. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_suspended_start_task_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - scic_sds_remote_node_context_resume(sci_rnc, NULL, NULL); - - return SCI_SUCCESS; -} - -/** - * - * @sci_rnc: The remote node context which is to receive the task request. - * @sci_req: The task request to be transmitted to to the remote target - * device. - * - * This method will report a success or failure attempt to start a new task - * request to the hardware. Since all task requests are sent on the high - * priority queue they can be sent when the RCN is in a TX suspend state. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_node_context_await_suspension_state_start_task_handler( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) -{ - return SCI_SUCCESS; -} - -static struct scic_sds_remote_node_context_handlers scic_sds_remote_node_context_state_handler_table[] = { - [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { - .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, - .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { - .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, - .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { - .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, - .start_task_handler = scic_sds_remote_node_context_default_start_task_handler, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { - .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, - .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { - .start_io_handler = scic_sds_remote_node_context_ready_state_start_io_handler, - .start_task_handler = scic_sds_remote_node_context_success_start_task_handler, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { - .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, - .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { - .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, - .start_task_handler = scic_sds_remote_node_context_suspended_start_task_handler, - }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { - .start_io_handler = scic_sds_remote_node_context_default_start_io_handler, - .start_task_handler = scic_sds_remote_node_context_await_suspension_state_start_task_handler, - } -}; - -/* - * ***************************************************************************** - * * REMOTE NODE CONTEXT PRIVATE METHODS - * ***************************************************************************** */ - /** * * @@ -415,80 +266,34 @@ static void scic_sds_remote_node_context_invalidate_context_buffer( SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); } -/* - * ***************************************************************************** - * * REMOTE NODE CONTEXT STATE ENTER AND EXIT METHODS - * ***************************************************************************** */ - -/** - * - * - * - */ static void scic_sds_remote_node_context_initial_state_enter(void *object) { struct scic_sds_remote_node_context *rnc = object; + struct sci_base_state_machine *sm = &rnc->state_machine; - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE - ); - - /* - * Check to see if we have gotten back to the initial state because someone - * requested to destroy the remote node context object. */ - if ( - rnc->state_machine.previous_state_id - == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ) { + /* Check to see if we have gotten back to the initial state because + * someone requested to destroy the remote node context object. + */ + if (sm->previous_state_id == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE) { rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - scic_sds_remote_node_context_notify_user(rnc); } } -/** - * - * - * - */ static void scic_sds_remote_node_context_posting_state_enter(void *object) { struct scic_sds_remote_node_context *sci_rnc = object; - SET_STATE_HANDLER( - sci_rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE - ); - scic_sds_remote_node_context_validate_context_buffer(sci_rnc); } -/** - * - * - * - */ static void scic_sds_remote_node_context_invalidating_state_enter(void *object) { struct scic_sds_remote_node_context *rnc = object; - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE - ); - scic_sds_remote_node_context_invalidate_context_buffer(rnc); } -/** - * - * - * - */ static void scic_sds_remote_node_context_resuming_state_enter(void *object) { struct scic_sds_remote_node_context *rnc = object; @@ -498,12 +303,6 @@ static void scic_sds_remote_node_context_resuming_state_enter(void *object) sci_dev = rnc_to_dev(rnc); dev = sci_dev_to_domain(sci_dev); - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE - ); - /* * For direct attached SATA devices we need to clear the TLCR * NCQ to TCi tag mapping on the phy and in cases where we @@ -518,84 +317,31 @@ static void scic_sds_remote_node_context_resuming_state_enter(void *object) scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); } -/** - * - * - * - */ static void scic_sds_remote_node_context_ready_state_enter(void *object) { struct scic_sds_remote_node_context *rnc = object; - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE - ); - rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - if (rnc->user_callback != NULL) { + if (rnc->user_callback) scic_sds_remote_node_context_notify_user(rnc); - } } -/** - * - * - * - */ static void scic_sds_remote_node_context_tx_suspended_state_enter(void *object) { struct scic_sds_remote_node_context *rnc = object; - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE - ); - scic_sds_remote_node_context_continue_state_transitions(rnc); } -/** - * - * - * - */ static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( void *object) { struct scic_sds_remote_node_context *rnc = object; - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE - ); - scic_sds_remote_node_context_continue_state_transitions(rnc); } -/** - * - * - * - */ -static void scic_sds_remote_node_context_await_suspension_state_enter( - void *object) -{ - struct scic_sds_remote_node_context *rnc = object; - - SET_STATE_HANDLER( - rnc, - scic_sds_remote_node_context_state_handler_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE - ); -} - -/* --------------------------------------------------------------------------- */ - static const struct sci_base_state scic_sds_remote_node_context_state_table[] = { [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { .enter_state = scic_sds_remote_node_context_initial_state_enter, @@ -618,9 +364,7 @@ static const struct sci_base_state scic_sds_remote_node_context_state_table[] = [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { .enter_state = scic_sds_remote_node_context_tx_rx_suspended_state_enter, }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { - .enter_state = scic_sds_remote_node_context_await_suspension_state_enter, - }, + [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { }, }; void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, @@ -875,3 +619,39 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ return SCI_FAILURE_INVALID_STATE; } } + +enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->state_machine.current_state_id; + if (state != SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + } + return SCI_SUCCESS; +} + +enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->state_machine.current_state_id; + switch (state) { + case SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE: + return SCI_SUCCESS; + case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE: + case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE: + scic_sds_remote_node_context_resume(sci_rnc, NULL, NULL); + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index 6898374..f53329f 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -84,31 +84,6 @@ struct scic_sds_remote_node_context; typedef void (*scics_sds_remote_node_context_callback)(void *); -typedef enum sci_status (*scic_sds_remote_node_context_operation)( - struct scic_sds_remote_node_context *sci_rnc, - scics_sds_remote_node_context_callback callback, - void *callback_parameter - ); - -typedef enum sci_status (*scic_sds_remote_node_context_io_request)( - struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req - ); - -struct scic_sds_remote_node_context_handlers { - /** - * This handler is invoked when there is a request to start an io request - * operation. - */ - scic_sds_remote_node_context_io_request start_io_handler; - - /** - * This handler is invoked when there is a request to start a task request - * operation. - */ - scic_sds_remote_node_context_io_request start_task_handler; -}; - /** * This is the enumeration of the remote node context states. */ @@ -220,8 +195,6 @@ struct scic_sds_remote_node_context { * This field contains the data for the object's state machine. */ struct sci_base_state_machine state_machine; - - struct scic_sds_remote_node_context_handlers *state_handlers; }; void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, @@ -236,24 +209,19 @@ bool scic_sds_remote_node_context_is_ready( enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remote_node_context *sci_rnc, u32 event_code); - enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, void *callback_parameter); - enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node_context *sci_rnc, u32 suspend_type, scics_sds_remote_node_context_callback cb_fn, void *cb_p); - enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback cb_fn, void *cb_p); - -#define scic_sds_remote_node_context_start_io(rnc, request) \ - ((rnc)->state_handlers->start_io_handler(rnc, request)) - -#define scic_sds_remote_node_context_start_task(rnc, task) \ - ((rnc)->state_handlers->start_task_handler(rnc, task)) +enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req); +enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_node_context *sci_rnc, + struct scic_sds_request *sci_req); #endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/state_machine.h b/drivers/scsi/isci/state_machine.h index c29eb427..60ef1cf 100644 --- a/drivers/scsi/isci/state_machine.h +++ b/drivers/scsi/isci/state_machine.h @@ -84,14 +84,6 @@ struct sci_base_state { }; /** - * SET_STATE_HANDLER() - - * - * This macro simply provides simplified retrieval of an objects state handler. - */ -#define SET_STATE_HANDLER(object, table, state) \ - (object)->state_handlers = &(table)[(state)] - -/** * struct sci_base_state_machine - This structure defines the fields common to * all state machines. * -- cgit v0.10.2 From 9269e0e898594c65dee6b20d4ed48e33dbbd4eeb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 May 2011 07:42:17 -0700 Subject: isci: add some type safety to the state machine interface Now that any given object type only has one state_machine we can use container_of() to get back to the given state machine owner. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index a942384..6cd7648 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1404,17 +1404,17 @@ static void isci_user_parameters_get( u->max_number_concurrent_device_spin_up = max_concurr_spinup; } -static void scic_sds_controller_initial_state_enter(void *object) +static void scic_sds_controller_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = object; + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_RESET); } -static inline void scic_sds_controller_starting_state_exit(void *object) +static inline void scic_sds_controller_starting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = object; + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); isci_timer_stop(scic->timeout_timer); } @@ -1539,17 +1539,17 @@ static enum sci_status scic_controller_set_interrupt_coalescence( } -static void scic_sds_controller_ready_state_enter(void *object) +static void scic_sds_controller_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = object; + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); /* set the default interrupt coalescence number and timeout value. */ scic_controller_set_interrupt_coalescence(scic, 0x10, 250); } -static void scic_sds_controller_ready_state_exit(void *object) +static void scic_sds_controller_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = object; + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); /* disable interrupt coalescence. */ scic_controller_set_interrupt_coalescence(scic, 0, 0); @@ -1638,9 +1638,9 @@ static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controll return status; } -static void scic_sds_controller_stopping_state_enter(void *object) +static void scic_sds_controller_stopping_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = object; + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); /* Stop all of the components for this controller */ scic_sds_controller_stop_phys(scic); @@ -1648,9 +1648,9 @@ static void scic_sds_controller_stopping_state_enter(void *object) scic_sds_controller_stop_devices(scic); } -static void scic_sds_controller_stopping_state_exit(void *object) +static void scic_sds_controller_stopping_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = object; + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); isci_timer_stop(scic->timeout_timer); } @@ -1679,9 +1679,9 @@ static void scic_sds_controller_reset_hardware(struct scic_sds_controller *scic) writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer); } -static void scic_sds_controller_resetting_state_enter(void *object) +static void scic_sds_controller_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = object; + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); scic_sds_controller_reset_hardware(scic); sci_base_state_machine_change_state(&scic->state_machine, @@ -1785,8 +1785,8 @@ static enum sci_status scic_controller_construct(struct scic_sds_controller *sci u8 i; sci_base_state_machine_construct(&scic->state_machine, - scic, scic_sds_controller_state_table, - SCI_BASE_CONTROLLER_STATE_INITIAL); + scic_sds_controller_state_table, + SCI_BASE_CONTROLLER_STATE_INITIAL); sci_base_state_machine_start(&scic->state_machine); diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 8bd1a85..f21e10e 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -1026,81 +1026,80 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, } -static void scic_sds_phy_starting_initial_substate_enter(void *object) +static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); /* This is just an temporary state go off to the starting state */ sci_base_state_machine_change_state(&sci_phy->state_machine, SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); } -static void scic_sds_phy_starting_await_sas_power_substate_enter(void *object) +static void scic_sds_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; scic_sds_controller_power_control_queue_insert(scic, sci_phy); } -static void scic_sds_phy_starting_await_sas_power_substate_exit(void *object) +static void scic_sds_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; scic_sds_controller_power_control_queue_remove(scic, sci_phy); } -static void scic_sds_phy_starting_await_sata_power_substate_enter(void *object) +static void scic_sds_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; scic_sds_controller_power_control_queue_insert(scic, sci_phy); } -static void scic_sds_phy_starting_await_sata_power_substate_exit(void *object) +static void scic_sds_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; scic_sds_controller_power_control_queue_remove(scic, sci_phy); } -static void scic_sds_phy_starting_await_sata_phy_substate_enter(void *object) +static void scic_sds_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); isci_timer_start(sci_phy->sata_timeout_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } -static void scic_sds_phy_starting_await_sata_phy_substate_exit(void *object) +static void scic_sds_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); isci_timer_stop(sci_phy->sata_timeout_timer); } -static void scic_sds_phy_starting_await_sata_speed_substate_enter(void *object) +static void scic_sds_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); isci_timer_start(sci_phy->sata_timeout_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } -static void scic_sds_phy_starting_await_sata_speed_substate_exit( - void *object) +static void scic_sds_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); isci_timer_stop(sci_phy->sata_timeout_timer); } -static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) +static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); if (scic_sds_port_link_detected(sci_phy->owning_port, sci_phy)) { @@ -1118,16 +1117,16 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(void *object) sci_phy->is_in_link_training = false; } -static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(void *object) +static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); isci_timer_stop(sci_phy->sata_timeout_timer); } -static void scic_sds_phy_starting_final_substate_enter(void *object) +static void scic_sds_phy_starting_final_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); /* State machine has run to completion so exit out and change * the base state machine to the ready state @@ -1217,9 +1216,9 @@ static void scu_link_layer_tx_hard_reset( &sci_phy->link_layer_registers->phy_configuration); } -static void scic_sds_phy_stopped_state_enter(void *object) +static void scic_sds_phy_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); struct scic_sds_port *sci_port = sci_phy->owning_port; struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); @@ -1242,9 +1241,9 @@ static void scic_sds_phy_stopped_state_enter(void *object) sci_phy); } -static void scic_sds_phy_starting_state_enter(void *object) +static void scic_sds_phy_starting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); scu_link_layer_stop_protocol_engine(sci_phy); scu_link_layer_start_oob(sci_phy); @@ -1262,9 +1261,9 @@ static void scic_sds_phy_starting_state_enter(void *object) SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); } -static void scic_sds_phy_ready_state_enter(void *object) +static void scic_sds_phy_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); scic_sds_controller_link_up(scic_sds_phy_get_controller(sci_phy), phy_get_non_dummy_port(sci_phy), @@ -1272,16 +1271,16 @@ static void scic_sds_phy_ready_state_enter(void *object) } -static void scic_sds_phy_ready_state_exit(void *object) +static void scic_sds_phy_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); scic_sds_phy_suspend(sci_phy); } -static void scic_sds_phy_resetting_state_enter(void *object) +static void scic_sds_phy_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = object; + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); /* The phy is being reset, therefore deactivate it from the port. In * the resetting state we don't notify the user regarding link up and @@ -1351,7 +1350,6 @@ void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, struct scic_sds_port *owning_port, u8 phy_index) { sci_base_state_machine_construct(&sci_phy->state_machine, - sci_phy, scic_sds_phy_state_table, SCI_BASE_PHY_STATE_INITIAL); diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index f43c1f6..3050415 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1133,9 +1133,9 @@ scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) writel(pts_control_value, &port->port_task_scheduler_registers->control); } -static void scic_sds_port_ready_substate_waiting_enter(void *object) +static void scic_sds_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); scic_sds_port_suspend_port_task_scheduler(sci_port); @@ -1148,10 +1148,10 @@ static void scic_sds_port_ready_substate_waiting_enter(void *object) } } -static void scic_sds_port_ready_substate_operational_enter(void *object) +static void scic_sds_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) { u32 index; - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); @@ -1210,9 +1210,9 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports * the port not ready and suspends the port task scheduler. none */ -static void scic_sds_port_ready_substate_operational_exit(void *object) +static void scic_sds_port_ready_substate_operational_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); @@ -1230,9 +1230,9 @@ static void scic_sds_port_ready_substate_operational_exit(void *object) scic_sds_port_invalidate_dummy_remote_node(sci_port); } -static void scic_sds_port_ready_substate_configuring_enter(void *object) +static void scic_sds_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); @@ -1247,9 +1247,9 @@ static void scic_sds_port_ready_substate_configuring_enter(void *object) SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); } -static void scic_sds_port_ready_substate_configuring_exit(void *object) +static void scic_sds_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); scic_sds_port_suspend_port_task_scheduler(sci_port); if (sci_port->ready_exit) @@ -1710,9 +1710,9 @@ static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) scic_sds_controller_post_request(scic, command); } -static void scic_sds_port_stopped_state_enter(void *object) +static void scic_sds_port_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); if (sci_port->state_machine.previous_state_id == SCI_BASE_PORT_STATE_STOPPING) { /* @@ -1723,17 +1723,17 @@ static void scic_sds_port_stopped_state_enter(void *object) } } -static void scic_sds_port_stopped_state_exit(void *object) +static void scic_sds_port_stopped_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); /* Enable and suspend the port task scheduler */ scic_sds_port_enable_port_task_scheduler(sci_port); } -static void scic_sds_port_ready_state_enter(void *object) +static void scic_sds_port_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); @@ -1753,25 +1753,25 @@ static void scic_sds_port_ready_state_enter(void *object) SCIC_SDS_PORT_READY_SUBSTATE_WAITING); } -static void scic_sds_port_resetting_state_exit(void *object) +static void scic_sds_port_resetting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); isci_timer_stop(sci_port->timer_handle); } -static void scic_sds_port_stopping_state_exit(void *object) +static void scic_sds_port_stopping_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); isci_timer_stop(sci_port->timer_handle); scic_sds_port_destroy_dummy_resources(sci_port); } -static void scic_sds_port_failed_state_enter(void *object) +static void scic_sds_port_failed_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = object; + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); struct isci_port *iport = sci_port_to_iport(sci_port); isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); @@ -1813,7 +1813,6 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, struct scic_sds_controller *scic) { sci_base_state_machine_construct(&sci_port->state_machine, - sci_port, scic_sds_port_state_table, SCI_BASE_PORT_STATE_STOPPED); diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index b900e2c..68b63b0 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -807,9 +807,9 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl isci_remote_device_ready(scic_to_ihost(scic), idev); } -static void scic_sds_remote_device_initial_state_enter(void *object) +static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); /* Initial state is a transitional state to the stopped state */ sci_base_state_machine_change_state(&sci_dev->state_machine, @@ -904,9 +904,9 @@ static void isci_remote_device_stop_complete(struct isci_host *ihost, isci_remote_device_deconstruct(ihost, idev); } -static void scic_sds_remote_device_stopped_state_enter(void *object) +static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); u32 prev_state; @@ -921,9 +921,9 @@ static void scic_sds_remote_device_stopped_state_enter(void *object) scic_sds_controller_remote_device_stopped(scic, sci_dev); } -static void scic_sds_remote_device_starting_state_enter(void *object) +static void scic_sds_remote_device_starting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic_to_ihost(scic); struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); @@ -932,9 +932,9 @@ static void scic_sds_remote_device_starting_state_enter(void *object) SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); } -static void scic_sds_remote_device_ready_state_enter(void *object) +static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); struct domain_device *dev = idev->domain_dev; @@ -951,9 +951,9 @@ static void scic_sds_remote_device_ready_state_enter(void *object) isci_remote_device_ready(scic_to_ihost(scic), idev); } -static void scic_sds_remote_device_ready_state_exit(void *object) +static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); struct domain_device *dev = sci_dev_to_domain(sci_dev); if (dev->dev_type == SAS_END_DEV) { @@ -965,24 +965,24 @@ static void scic_sds_remote_device_ready_state_exit(void *object) } } -static void scic_sds_remote_device_resetting_state_enter(void *object) +static void scic_sds_remote_device_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); scic_sds_remote_node_context_suspend( &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); } -static void scic_sds_remote_device_resetting_state_exit(void *object) +static void scic_sds_remote_device_resetting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); } -static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *object) +static void scic_sds_stp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); sci_dev->working_request = NULL; if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { @@ -997,9 +997,9 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *object) } } -static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) +static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); BUG_ON(sci_dev->working_request == NULL); @@ -1008,9 +1008,9 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object) SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } -static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(void *object) +static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); @@ -1019,17 +1019,17 @@ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(void *obje sci_dev->not_ready_reason); } -static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object) +static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); isci_remote_device_ready(scic_to_ihost(scic), sci_dev_to_idev(sci_dev)); } -static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) +static void scic_sds_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); BUG_ON(sci_dev->working_request == NULL); @@ -1038,9 +1038,9 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object) SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } -static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object) +static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = object; + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); sci_dev->working_request = NULL; } @@ -1102,16 +1102,11 @@ static void scic_remote_device_construct(struct scic_sds_port *sci_port, sci_dev->owning_port = sci_port; sci_dev->started_request_count = 0; - sci_base_state_machine_construct( - &sci_dev->state_machine, - sci_dev, - scic_sds_remote_device_state_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL - ); + sci_base_state_machine_construct(&sci_dev->state_machine, + scic_sds_remote_device_state_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); - sci_base_state_machine_start( - &sci_dev->state_machine - ); + sci_base_state_machine_start(&sci_dev->state_machine); scic_sds_remote_node_context_construct(&sci_dev->rnc, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 82507bd..e7fa5ba 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -266,10 +266,9 @@ static void scic_sds_remote_node_context_invalidate_context_buffer( SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); } -static void scic_sds_remote_node_context_initial_state_enter(void *object) +static void scic_sds_remote_node_context_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = object; - struct sci_base_state_machine *sm = &rnc->state_machine; + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); /* Check to see if we have gotten back to the initial state because * someone requested to destroy the remote node context object. @@ -280,23 +279,23 @@ static void scic_sds_remote_node_context_initial_state_enter(void *object) } } -static void scic_sds_remote_node_context_posting_state_enter(void *object) +static void scic_sds_remote_node_context_posting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *sci_rnc = object; + struct scic_sds_remote_node_context *sci_rnc = container_of(sm, typeof(*sci_rnc), state_machine); scic_sds_remote_node_context_validate_context_buffer(sci_rnc); } -static void scic_sds_remote_node_context_invalidating_state_enter(void *object) +static void scic_sds_remote_node_context_invalidating_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = object; + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); scic_sds_remote_node_context_invalidate_context_buffer(rnc); } -static void scic_sds_remote_node_context_resuming_state_enter(void *object) +static void scic_sds_remote_node_context_resuming_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = object; + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); struct scic_sds_remote_device *sci_dev; struct domain_device *dev; @@ -317,9 +316,9 @@ static void scic_sds_remote_node_context_resuming_state_enter(void *object) scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); } -static void scic_sds_remote_node_context_ready_state_enter(void *object) +static void scic_sds_remote_node_context_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = object; + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; @@ -327,17 +326,16 @@ static void scic_sds_remote_node_context_ready_state_enter(void *object) scic_sds_remote_node_context_notify_user(rnc); } -static void scic_sds_remote_node_context_tx_suspended_state_enter(void *object) +static void scic_sds_remote_node_context_tx_suspended_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = object; + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); scic_sds_remote_node_context_continue_state_transitions(rnc); } -static void scic_sds_remote_node_context_tx_rx_suspended_state_enter( - void *object) +static void scic_sds_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = object; + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); scic_sds_remote_node_context_continue_state_transitions(rnc); } @@ -375,12 +373,9 @@ void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context rnc->remote_node_index = remote_node_index; rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - sci_base_state_machine_construct( - &rnc->state_machine, - rnc, - scic_sds_remote_node_context_state_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE - ); + sci_base_state_machine_construct(&rnc->state_machine, + scic_sds_remote_node_context_state_table, + SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE); sci_base_state_machine_start(&rnc->state_machine); } diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index c63064e..063ef04 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2900,10 +2900,9 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, isci_host_can_dequeue(isci_host, 1); } -static void scic_sds_request_started_state_enter(void *object) +static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = object; - struct sci_base_state_machine *sm = &sci_req->state_machine; + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); struct isci_request *ireq = sci_req_to_ireq(sci_req); struct domain_device *dev = sci_dev_to_domain(sci_req->target_device); struct sas_task *task; @@ -2942,9 +2941,9 @@ static void scic_sds_request_started_state_enter(void *object) } } -static void scic_sds_request_completed_state_enter(void *object) +static void scic_sds_request_completed_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = object; + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); struct scic_sds_controller *scic = sci_req->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_request *ireq = sci_req_to_ireq(sci_req); @@ -2957,42 +2956,41 @@ static void scic_sds_request_completed_state_enter(void *object) isci_task_request_complete(ihost, ireq, sci_req->sci_status); } -static void scic_sds_request_aborting_state_enter(void *object) +static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = object; + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); /* Setting the abort bit in the Task Context is required by the silicon. */ sci_req->task_context_buffer->abort = 1; } -static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter( - void *object) +static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = object; + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); scic_sds_remote_device_set_working_request(sci_req->target_device, sci_req); } -static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(void *object) +static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = object; + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); scic_sds_remote_device_set_working_request(sci_req->target_device, sci_req); } -static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(void *object) +static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = object; + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); scic_sds_remote_device_set_working_request(sci_req->target_device, sci_req); } -static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(void *object) +static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = object; + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); struct scu_task_context *task_context; struct host_to_dev_fis *h2d_fis; enum sci_status status; @@ -3052,8 +3050,9 @@ static void scic_sds_general_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, u16 io_tag, struct scic_sds_request *sci_req) { - sci_base_state_machine_construct(&sci_req->state_machine, sci_req, - scic_sds_request_state_table, SCI_BASE_REQUEST_STATE_INITIAL); + sci_base_state_machine_construct(&sci_req->state_machine, + scic_sds_request_state_table, + SCI_BASE_REQUEST_STATE_INITIAL); sci_base_state_machine_start(&sci_req->state_machine); sci_req->io_tag = io_tag; diff --git a/drivers/scsi/isci/state_machine.c b/drivers/scsi/isci/state_machine.c index 6057782..1bcd925 100644 --- a/drivers/scsi/isci/state_machine.c +++ b/drivers/scsi/isci/state_machine.c @@ -68,7 +68,7 @@ static void sci_state_machine_exit_state(struct sci_base_state_machine *sm) sci_state_transition_t exit = sm->state_table[state].exit_state; if (exit) - exit(sm->state_machine_owner); + exit(sm); } static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) @@ -77,22 +77,15 @@ static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) sci_state_transition_t enter = sm->state_table[state].enter_state; if (enter) - enter(sm->state_machine_owner); + enter(sm); } -/* - * ****************************************************************************** - * * P R O T E C T E D M E T H O D S - * ****************************************************************************** */ - /** * This method will set the initial state and state table for the state * machine. The caller should follow this request with the initialize * request to cause the state machine to start. * @sm: This parameter provides the state machine object to be * constructed. - * @state_machine_owner: This parameter indicates the object that is owns the - * state machine being constructed. * @state_table: This parameter specifies the table of state objects that is * managed by this state machine. * @initial_state: This parameter specifies the value of the initial state for @@ -100,11 +93,9 @@ static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) * */ void sci_base_state_machine_construct(struct sci_base_state_machine *sm, - void *owner, const struct sci_base_state *state_table, u32 initial_state) { - sm->state_machine_owner = owner; sm->initial_state_id = initial_state; sm->previous_state_id = initial_state; sm->current_state_id = initial_state; diff --git a/drivers/scsi/isci/state_machine.h b/drivers/scsi/isci/state_machine.h index 60ef1cf..067ed91 100644 --- a/drivers/scsi/isci/state_machine.h +++ b/drivers/scsi/isci/state_machine.h @@ -58,9 +58,9 @@ #include +struct sci_base_state_machine; typedef void (*sci_base_state_handler_t)(void); - -typedef void (*sci_state_transition_t)(void *base_object); +typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm); /** * struct sci_base_state - The base state object abstracts the fields common to @@ -80,7 +80,6 @@ struct sci_base_state { * invoked when the state is exited. */ sci_state_transition_t exit_state; - }; /** @@ -96,13 +95,6 @@ struct sci_base_state_machine { const struct sci_base_state *state_table; /** - * This field points to the object to which this state machine is - * associated. It serves as a cookie to be provided to the state - * enter/exit methods. - */ - void *state_machine_owner; - - /** * This field simply indicates the state value for the state machine's * initial state. */ @@ -120,28 +112,13 @@ struct sci_base_state_machine { }; -/* - * ****************************************************************************** - * * P R O T E C T E D M E T H O D S - * ****************************************************************************** */ - -void sci_base_state_machine_construct( - struct sci_base_state_machine *this_state_machine, - void *state_machine_owner, - const struct sci_base_state *state_table, - u32 initial_state); - -void sci_base_state_machine_start( - struct sci_base_state_machine *this_state_machine); - -void sci_base_state_machine_stop( - struct sci_base_state_machine *this_state_machine); - -void sci_base_state_machine_change_state( - struct sci_base_state_machine *this_state_machine, - u32 next_state); - -u32 sci_base_state_machine_get_state( - struct sci_base_state_machine *this_state_machine); +void sci_base_state_machine_construct(struct sci_base_state_machine *sm, + const struct sci_base_state *state_table, + u32 initial_state); +void sci_base_state_machine_start(struct sci_base_state_machine *sm); +void sci_base_state_machine_stop(struct sci_base_state_machine *sm); +void sci_base_state_machine_change_state(struct sci_base_state_machine *sm, + u32 next_state); +u32 sci_base_state_machine_get_state(struct sci_base_state_machine *sm); #endif /* _SCI_BASE_STATE_MACHINE_H_ */ -- cgit v0.10.2 From 5553ba2be0f3e3741e1a885a33d2b89921f9fd48 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 19 May 2011 11:59:10 +0000 Subject: isci: replace isci_timer list with proper embedded timers Rather than preallocating a list of timers and doling them out at runtime, embed a struct timerlist in each object that needs one. A struct sci_timer interface is introduced to manage the timer cancellation semantics which currently need to guarantee the timer is cancelled while holding spin_lock(ihost->scic_lock). Since the timeout functions also need to acquire the lock it currently prevents the driver from using del_timer_sync() for runtime cancellations. del_timer_sync() is used however before the objects go out of scope. Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 6cd7648..a3269b6 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1359,6 +1359,13 @@ void isci_host_deinit(struct isci_host *ihost) wait_for_stop(ihost); scic_controller_reset(&ihost->sci); + + /* Cancel any/all outstanding port timers */ + for (i = 0; i < ihost->sci.logical_port_entries; i++) { + struct scic_sds_port *sci_port = &ihost->ports[i].sci; + del_timer_sync(&sci_port->timer.timer); + } + isci_timer_list_destroy(ihost); } diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 69826ea..2fe5557 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -551,4 +551,37 @@ extern unsigned char max_concurr_spinup; irqreturn_t isci_msix_isr(int vec, void *data); irqreturn_t isci_intx_isr(int vec, void *data); irqreturn_t isci_error_isr(int vec, void *data); + +/* + * Each timer is associated with a cancellation flag that is set when + * del_timer() is called and checked in the timer callback function. This + * is needed since del_timer_sync() cannot be called with scic_lock held. + * For deinit however, del_timer_sync() is used without holding the lock. + */ +struct sci_timer { + struct timer_list timer; + bool cancel; +}; + +static inline +void sci_init_timer(struct sci_timer *tmr, void (*fn)(unsigned long)) +{ + tmr->timer.function = fn; + tmr->timer.data = (unsigned long) tmr; + tmr->cancel = 0; + init_timer(&tmr->timer); +} + +static inline void sci_mod_timer(struct sci_timer *tmr, unsigned long msec) +{ + tmr->cancel = 0; + mod_timer(&tmr->timer, jiffies + msecs_to_jiffies(msec)); +} + +static inline void sci_del_timer(struct sci_timer *tmr) +{ + tmr->cancel = 1; + del_timer(&tmr->timer); +} + #endif /* __ISCI_H__ */ diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 3050415..3da9048 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -926,17 +926,19 @@ bool scic_sds_port_link_detected( return true; } -/** - * This method is provided to timeout requests for port operations. Mostly its - * for the port reset operation. - * - * - */ -static void scic_sds_port_timeout_handler(void *port) +static void port_timeout(unsigned long data) { - struct scic_sds_port *sci_port = port; + struct sci_timer *tmr = (struct sci_timer *)data; + struct scic_sds_port *sci_port = container_of(tmr, typeof(*sci_port), timer); + struct isci_host *ihost = scic_to_ihost(sci_port->owning_controller); + unsigned long flags; u32 current_state; + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + current_state = sci_base_state_machine_get_state(&sci_port->state_machine); if (current_state == SCI_BASE_PORT_STATE_RESETTING) { @@ -965,6 +967,9 @@ static void scic_sds_port_timeout_handler(void *port) "%s: SCIC Port 0x%p is processing a timeout operation " "in state %d.\n", __func__, sci_port, current_state); } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); } /* --------------------------------------------------------------------------- */ @@ -1259,7 +1264,6 @@ static void scic_sds_port_ready_substate_configuring_exit(struct sci_base_state_ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); enum sci_status status = SCI_SUCCESS; enum scic_sds_port_states state; u32 phy_mask; @@ -1280,14 +1284,6 @@ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; } - sci_port->timer_handle = - isci_timer_create(ihost, - sci_port, - scic_sds_port_timeout_handler); - - if (!sci_port->timer_handle) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - if (sci_port->reserved_rni == SCU_DUMMY_INDEX) { u16 rni = scic_sds_remote_node_table_allocate_remote_node( &scic->available_remote_nodes, 1); @@ -1390,7 +1386,7 @@ static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 if (status != SCI_SUCCESS) return status; - isci_timer_start(sci_port->timer_handle, timeout); + sci_mod_timer(&sci_port->timer, timeout); sci_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; port_state_machine_change(sci_port, @@ -1757,14 +1753,14 @@ static void scic_sds_port_resetting_state_exit(struct sci_base_state_machine *sm { struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); - isci_timer_stop(sci_port->timer_handle); + sci_del_timer(&sci_port->timer); } static void scic_sds_port_stopping_state_exit(struct sci_base_state_machine *sm) { struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); - isci_timer_stop(sci_port->timer_handle); + sci_del_timer(&sci_port->timer); scic_sds_port_destroy_dummy_resources(sci_port); } @@ -1831,7 +1827,8 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, sci_port->reserved_rni = SCU_DUMMY_INDEX; sci_port->reserved_tci = SCU_DUMMY_INDEX; - sci_port->timer_handle = NULL; + sci_init_timer(&sci_port->timer, port_timeout); + sci_port->port_task_scheduler_registers = NULL; for (index = 0; index < SCI_MAX_PHYS; index++) diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index af540e5..9a69128 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -139,10 +139,8 @@ struct scic_sds_port { */ struct scic_sds_controller *owning_controller; - /** - * This field contains the port start/stop timer handle. - */ - void *timer_handle; + /* timer used for port start/stop operations */ + struct sci_timer timer; /** * This field is the pointer to the port task scheduler registers -- cgit v0.10.2 From ac0eeb4f774261d1da21a68169f7ddd4f6c082fc Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 19 May 2011 20:00:51 -0700 Subject: isci: convert port config agent timer to sci_timer Signed-off-by: Edmund Nadolski [squashed collateral cleanups] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index a3269b6..468357f 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1366,6 +1366,8 @@ void isci_host_deinit(struct isci_host *ihost) del_timer_sync(&sci_port->timer.timer); } + del_timer_sync(&ihost->sci.port_agent.timer.timer); + isci_timer_list_destroy(ihost); } diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 784e135..deb0ee03 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -122,7 +122,7 @@ struct scic_sds_port_configuration_agent { bool timer_pending; port_config_fn link_up_handler; port_config_fn link_down_handler; - void *timer; + struct sci_timer timer; }; /** @@ -569,15 +569,6 @@ static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic) } /** - * scic_sds_controller_get_port_configuration_agent() - - * - * This is a helper macro to get the port configuration agent from the - * controller object. - */ -#define scic_sds_controller_get_port_configuration_agent(controller) \ - (&(controller)->port_agent) - -/** * scic_sds_controller_get_protocol_engine_group() - * * This macro returns the protocol engine group for this controller object. diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index ca76f49..1cde7b9 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -328,21 +328,25 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); } -/** - * - * - * This timer routine is used to allow the SCI User to rediscover or change - * device objects before a new series of link up notifications because a link - * down has allowed a better port configuration. - */ -static void scic_sds_mpc_agent_timeout_handler(void *object) +static void mpc_agent_timeout(unsigned long data) { u8 index; - struct scic_sds_controller *scic = object; - struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_port_configuration_agent *port_agent = &scic->port_agent; + struct sci_timer *tmr = (struct sci_timer *)data; + struct scic_sds_port_configuration_agent *port_agent; + struct scic_sds_controller *scic; + struct isci_host *ihost; + unsigned long flags; u16 configure_phy_mask; + port_agent = container_of(tmr, typeof(*port_agent), timer); + scic = container_of(port_agent, typeof(*scic), port_agent); + ihost = scic_to_ihost(scic); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + port_agent->timer_pending = false; /* Find the mask of phys that are reported read but as yet unconfigured into a port */ @@ -357,6 +361,9 @@ static void scic_sds_mpc_agent_timeout_handler(void *object) sci_phy); } } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); } /** @@ -441,8 +448,8 @@ static void scic_sds_mpc_agent_link_down( !port_agent->timer_pending) { port_agent->timer_pending = true; - isci_timer_start(port_agent->timer, - SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); + sci_mod_timer(&port_agent->timer, + SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); } scic_sds_port_link_down(sci_port, sci_phy); @@ -500,31 +507,6 @@ static enum sci_status scic_sds_apc_agent_validate_phy_configuration( /** * - * @controller: This is the controller that to which the port agent is assigned. - * @port_agent: This is the port agent that is requesting the timer start - * operation. - * @phy: This is the phy that has caused the timer operation to be scheduled. - * - * This routine will restart the automatic port configuration timeout timer for - * the next time period. This could be caused by either a link down event or a - * link up event where we can not yet tell to which port a phy belongs. - */ -static inline void scic_sds_apc_agent_start_timer( - struct scic_sds_controller *scic, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_phy *sci_phy, - u32 timeout) -{ - if (port_agent->timer_pending) - isci_timer_stop(port_agent->timer); - - port_agent->timer_pending = true; - - isci_timer_start(port_agent->timer, timeout); -} - -/** - * * @controller: This is the controller object that receives the link up * notification. * @phy: This is the phy object which has gone link up. @@ -635,9 +617,17 @@ static void scic_sds_apc_agent_configure_ports( break; case SCIC_SDS_APC_START_TIMER: - scic_sds_apc_agent_start_timer( - controller, port_agent, phy, SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION - ); + /* + * This can occur for either a link down event, or a link + * up event where we cannot yet tell the port to which a + * phy belongs. + */ + if (port_agent->timer_pending) + sci_del_timer(&port_agent->timer); + + port_agent->timer_pending = true; + sci_mod_timer(&port_agent->timer, + SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); break; case SCIC_SDS_APC_SKIP_PHY: @@ -719,15 +709,24 @@ static void scic_sds_apc_agent_link_down( } /* configure the phys into ports when the timer fires */ -static void scic_sds_apc_agent_timeout_handler(void *object) +static void apc_agent_timeout(unsigned long data) { u32 index; + struct sci_timer *tmr = (struct sci_timer *)data; struct scic_sds_port_configuration_agent *port_agent; - struct scic_sds_controller *scic = object; - struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_controller *scic; + struct isci_host *ihost; + unsigned long flags; u16 configure_phy_mask; - port_agent = scic_sds_controller_get_port_configuration_agent(scic); + port_agent = container_of(tmr, typeof(*port_agent), timer); + scic = container_of(port_agent, typeof(*scic), port_agent); + ihost = scic_to_ihost(scic); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; port_agent->timer_pending = false; @@ -743,6 +742,9 @@ static void scic_sds_apc_agent_timeout_handler(void *object) scic_sds_apc_agent_configure_ports(scic, port_agent, &ihost->phys[index].sci, false); } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); } /* @@ -769,7 +771,6 @@ void scic_sds_port_configuration_agent_construct( port_agent->link_down_handler = NULL; port_agent->timer_pending = false; - port_agent->timer = NULL; for (index = 0; index < SCI_MAX_PORTS; index++) { port_agent->phy_valid_port_range[index].min_index = 0; @@ -781,9 +782,8 @@ enum sci_status scic_sds_port_configuration_agent_initialize( struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent) { - enum sci_status status = SCI_SUCCESS; + enum sci_status status; enum scic_port_configuration_mode mode; - struct isci_host *ihost = scic_to_ihost(scic); mode = scic->oem_parameters.sds1.controller.mode_type; @@ -794,10 +794,7 @@ enum sci_status scic_sds_port_configuration_agent_initialize( port_agent->link_up_handler = scic_sds_mpc_agent_link_up; port_agent->link_down_handler = scic_sds_mpc_agent_link_down; - port_agent->timer = isci_timer_create( - ihost, - scic, - scic_sds_mpc_agent_timeout_handler); + sci_init_timer(&port_agent->timer, mpc_agent_timeout); } else { status = scic_sds_apc_agent_validate_phy_configuration( scic, port_agent); @@ -805,21 +802,7 @@ enum sci_status scic_sds_port_configuration_agent_initialize( port_agent->link_up_handler = scic_sds_apc_agent_link_up; port_agent->link_down_handler = scic_sds_apc_agent_link_down; - port_agent->timer = isci_timer_create( - ihost, - scic, - scic_sds_apc_agent_timeout_handler); - } - - /* Make sure we have actually gotten a timer */ - if ((status == SCI_SUCCESS) && (port_agent->timer == NULL)) { - dev_err(scic_to_dev(scic), - "%s: Controller 0x%p automatic port configuration " - "agent could not get timer.\n", - __func__, - scic); - - status = SCI_FAILURE; + sci_init_timer(&port_agent->timer, apc_agent_timeout); } return status; -- cgit v0.10.2 From a628d478570d71fb8751ad09b8017139c5056002 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 19 May 2011 11:59:36 +0000 Subject: isci: convert phy sata_timeout_timer to sci_timer Convert the sata_timeout_timer in the scic_sds_phy struct to use a struct sci_timer Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 468357f..aa00cce 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1366,6 +1366,12 @@ void isci_host_deinit(struct isci_host *ihost) del_timer_sync(&sci_port->timer.timer); } + /* Cancel any/all outstanding phy timers */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + struct scic_sds_phy *sci_phy = &ihost->phys[i].sci; + del_timer_sync(&sci_phy->sata_timer.timer); + } + del_timer_sync(&ihost->sci.port_agent.timer.timer); isci_timer_list_destroy(ihost); diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index f21e10e..b663bbd 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -256,14 +256,17 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, return SCI_SUCCESS; } -/** - * This function will handle the sata SIGNATURE FIS timeout condition. It will - * restart the starting substate machine since we dont know what has actually - * happening. - */ -static void scic_sds_phy_sata_timeout(void *phy) +static void phy_sata_timeout(unsigned long data) { - struct scic_sds_phy *sci_phy = phy; + struct sci_timer *tmr = (struct sci_timer *)data; + struct scic_sds_phy *sci_phy = container_of(tmr, typeof(*sci_phy), sata_timer); + struct isci_host *ihost = scic_to_ihost(sci_phy->owning_port->owning_controller); + unsigned long flags; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; dev_dbg(sciphy_to_dev(sci_phy), "%s: SCIC SDS Phy 0x%p did not receive signature fis before " @@ -273,6 +276,8 @@ static void scic_sds_phy_sata_timeout(void *phy) sci_base_state_machine_change_state(&sci_phy->state_machine, SCI_BASE_PHY_STATE_STARTING); +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); } /** @@ -327,16 +332,6 @@ enum sci_status scic_sds_phy_initialize( struct scu_transport_layer_registers __iomem *transport_layer_registers, struct scu_link_layer_registers __iomem *link_layer_registers) { - struct scic_sds_controller *scic = scic_sds_phy_get_controller(sci_phy); - struct isci_host *ihost = scic_to_ihost(scic); - - /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = - isci_timer_create( - ihost, - sci_phy, - scic_sds_phy_sata_timeout); - /* Perfrom the initialization of the TL hardware */ scic_sds_phy_transport_layer_initialization( sci_phy, @@ -442,9 +437,7 @@ void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) { - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; - struct isci_host *ihost = scic_to_ihost(scic); if (state != SCI_BASE_PHY_STATE_STOPPED) { dev_dbg(sciphy_to_dev(sci_phy), @@ -452,14 +445,8 @@ enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) return SCI_FAILURE_INVALID_STATE; } - /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_phy->sata_timeout_timer = isci_timer_create(ihost, sci_phy, - scic_sds_phy_sata_timeout); - - if (sci_phy->sata_timeout_timer) - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); - + sci_base_state_machine_change_state(&sci_phy->state_machine, + SCI_BASE_PHY_STATE_STARTING); return SCI_SUCCESS; } @@ -1071,30 +1058,28 @@ static void scic_sds_phy_starting_await_sata_phy_substate_enter(struct sci_base_ { struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); + sci_mod_timer(&sci_phy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } static void scic_sds_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm) { struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); - isci_timer_stop(sci_phy->sata_timeout_timer); + sci_del_timer(&sci_phy->sata_timer); } static void scic_sds_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm) { struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); + sci_mod_timer(&sci_phy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } static void scic_sds_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm) { struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); - isci_timer_stop(sci_phy->sata_timeout_timer); + sci_del_timer(&sci_phy->sata_timer); } static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm) @@ -1111,8 +1096,8 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_bas */ scic_sds_phy_resume(sci_phy); - isci_timer_start(sci_phy->sata_timeout_timer, - SCIC_SDS_SIGNATURE_FIS_TIMEOUT); + sci_mod_timer(&sci_phy->sata_timer, + SCIC_SDS_SIGNATURE_FIS_TIMEOUT); } else sci_phy->is_in_link_training = false; } @@ -1121,7 +1106,7 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base { struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); - isci_timer_stop(sci_phy->sata_timeout_timer); + sci_del_timer(&sci_phy->sata_timer); } static void scic_sds_phy_starting_final_substate_enter(struct sci_base_state_machine *sm) @@ -1219,19 +1204,12 @@ static void scu_link_layer_tx_hard_reset( static void scic_sds_phy_stopped_state_enter(struct sci_base_state_machine *sm) { struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); - struct scic_sds_port *sci_port = sci_phy->owning_port; - struct scic_sds_controller *scic = sci_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); /* * @todo We need to get to the controller to place this PE in a * reset state */ - if (sci_phy->sata_timeout_timer != NULL) { - isci_del_timer(ihost, sci_phy->sata_timeout_timer); - - sci_phy->sata_timeout_timer = NULL; - } + sci_del_timer(&sci_phy->sata_timer); scu_link_layer_stop_protocol_engine(sci_phy); @@ -1362,7 +1340,9 @@ void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; sci_phy->link_layer_registers = NULL; sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; - sci_phy->sata_timeout_timer = NULL; + + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_init_timer(&sci_phy->sata_timer, phy_sata_timeout); } void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 7694ec4..da3f0f1 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -134,11 +134,11 @@ struct scic_sds_phy { bool is_in_link_training; /** - * This field contains a reference to the timer utilized in detecting - * when a signature FIS timeout has occurred. The signature FIS is the - * first FIS sent by an attached SATA device after OOB/SN. + * Timer to detect when a signature FIS timeout has occurred. The + * signature FIS is the first FIS sent by an attached SATA device + * after OOB/SN. */ - void *sata_timeout_timer; + struct sci_timer sata_timer; /** * This field is the pointer to the transport layer register for the SCU -- cgit v0.10.2 From 0473661a125905240879456567e117ed8a58cf5d Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 19 May 2011 20:17:47 -0700 Subject: isci: convert power control timer to sci_timer Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index aa00cce..7b497f2 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1374,6 +1374,8 @@ void isci_host_deinit(struct isci_host *ihost) del_timer_sync(&ihost->sci.port_agent.timer.timer); + del_timer_sync(&ihost->sci.power_control.timer.timer); + isci_timer_list_destroy(ihost); } @@ -1935,67 +1937,55 @@ static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sd return SCI_SUCCESS; } -static void scic_sds_controller_power_control_timer_start(struct scic_sds_controller *scic) +static void power_control_timeout(unsigned long data) { - isci_timer_start(scic->power_control.timer, - SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + struct sci_timer *tmr = (struct sci_timer *)data; + struct scic_sds_controller *scic = container_of(tmr, typeof(*scic), power_control.timer); + struct isci_host *ihost = scic_to_ihost(scic); + struct scic_sds_phy *sci_phy; + unsigned long flags; + u8 i; - scic->power_control.timer_started = true; -} + spin_lock_irqsave(&ihost->scic_lock, flags); -static void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic) -{ - if (scic->power_control.timer_started) { - isci_timer_stop(scic->power_control.timer); + if (tmr->cancel) + goto done; + + scic->power_control.phys_granted_power = 0; + + if (scic->power_control.phys_waiting == 0) { scic->power_control.timer_started = false; + goto done; } -} - -static void scic_sds_controller_power_control_timer_restart(struct scic_sds_controller *scic) -{ - scic_sds_controller_power_control_timer_stop(scic); - scic_sds_controller_power_control_timer_start(scic); -} -static void scic_sds_controller_power_control_timer_handler( - void *controller) -{ - struct scic_sds_controller *scic; + for (i = 0; i < SCI_MAX_PHYS; i++) { - scic = (struct scic_sds_controller *)controller; + if (scic->power_control.phys_waiting == 0) + break; - scic->power_control.phys_granted_power = 0; + sci_phy = scic->power_control.requesters[i]; + if (sci_phy == NULL) + continue; - if (scic->power_control.phys_waiting == 0) { - scic->power_control.timer_started = false; - } else { - struct scic_sds_phy *sci_phy = NULL; - u8 i; - - for (i = 0; - (i < SCI_MAX_PHYS) - && (scic->power_control.phys_waiting != 0); - i++) { - if (scic->power_control.requesters[i] != NULL) { - if (scic->power_control.phys_granted_power < - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { - sci_phy = scic->power_control.requesters[i]; - scic->power_control.requesters[i] = NULL; - scic->power_control.phys_waiting--; - scic->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(sci_phy); - } else { - break; - } - } - } + if (scic->power_control.phys_granted_power >= + scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) + break; - /* - * It doesn't matter if the power list is empty, we need to start the - * timer in case another phy becomes ready. - */ - scic_sds_controller_power_control_timer_start(scic); + scic->power_control.requesters[i] = NULL; + scic->power_control.phys_waiting--; + scic->power_control.phys_granted_power++; + scic_sds_phy_consume_power_handler(sci_phy); } + + /* + * It doesn't matter if the power list is empty, we need to start the + * timer in case another phy becomes ready. + */ + sci_mod_timer(tmr, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + scic->power_control.timer_started = true; + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); } /** @@ -2019,7 +2009,13 @@ void scic_sds_controller_power_control_queue_insert( * stop and start the power_control timer. When the timer fires, the * no_of_phys_granted_power will be set to 0 */ - scic_sds_controller_power_control_timer_restart(scic); + if (scic->power_control.timer_started) + sci_del_timer(&scic->power_control.timer); + + sci_mod_timer(&scic->power_control.timer, + SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + scic->power_control.timer_started = true; + } else { /* Add the phy in the waiting list */ scic->power_control.requesters[sci_phy->phy_index] = sci_phy; @@ -2224,10 +2220,7 @@ static enum sci_status scic_controller_set_mode(struct scic_sds_controller *scic static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) { - struct isci_host *ihost = scic_to_ihost(scic); - scic->power_control.timer = isci_timer_create(ihost, - scic, - scic_sds_controller_power_control_timer_handler); + sci_init_timer(&scic->power_control.timer, power_control_timeout); memset(scic->power_control.requesters, 0, sizeof(scic->power_control.requesters)); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index deb0ee03..2be935f 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -83,10 +83,9 @@ struct scic_power_control { bool timer_started; /** - * This field is the handle to the driver timer object. This timer is used to - * control when the directed attached disks can consume power. + * Timer to control when the directed attached disks can consume power. */ - void *timer; + struct sci_timer timer; /** * This field is used to keep track of how many phys are put into the -- cgit v0.10.2 From 6cb5853d3e252015eaf72d3761491e3da959556d Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 19 May 2011 11:59:56 +0000 Subject: isci: convert scic_timeout_timer to sci_timer Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 7b497f2..156b375 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1115,7 +1115,7 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, scic_sds_controller_start_next_phy(scic); - isci_timer_start(scic->timeout_timer, timeout); + sci_mod_timer(&scic->timer, timeout); sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_STARTING); @@ -1296,7 +1296,7 @@ static enum sci_status scic_controller_stop(struct scic_sds_controller *scic, return SCI_FAILURE_INVALID_STATE; } - isci_timer_start(scic->timeout_timer, timeout); + sci_mod_timer(&scic->timer, timeout); sci_base_state_machine_change_state(&scic->state_machine, SCI_BASE_CONTROLLER_STATE_STOPPING); return SCI_SUCCESS; @@ -1376,6 +1376,8 @@ void isci_host_deinit(struct isci_host *ihost) del_timer_sync(&ihost->sci.power_control.timer.timer); + del_timer_sync(&ihost->sci.timer.timer); + isci_timer_list_destroy(ihost); } @@ -1433,7 +1435,7 @@ static inline void scic_sds_controller_starting_state_exit(struct sci_base_state { struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); - isci_timer_stop(scic->timeout_timer); + sci_del_timer(&scic->timer); } #define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 @@ -1669,7 +1671,7 @@ static void scic_sds_controller_stopping_state_exit(struct sci_base_state_machin { struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); - isci_timer_stop(scic->timeout_timer); + sci_del_timer(&scic->timer); } @@ -1776,7 +1778,33 @@ static void scic_sds_controller_set_default_config_parameters(struct scic_sds_co scic->user_parameters.sds1.no_outbound_task_timeout = 20; } +static void controller_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct scic_sds_controller *scic = container_of(tmr, typeof(*scic), timer); + struct isci_host *ihost = scic_to_ihost(scic); + struct sci_base_state_machine *sm = &scic->state_machine; + unsigned long flags; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) + scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); + else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) { + sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED); + isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); + } else /* / @todo Now what do we want to do in this case? */ + dev_err(scic_to_dev(scic), + "%s: Controller timer fired when controller was not " + "in a state being timed.\n", + __func__); +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} /** * scic_controller_construct() - This method will attempt to construct a @@ -1826,6 +1854,8 @@ static enum sci_status scic_controller_construct(struct scic_sds_controller *sci scic->invalid_phy_mask = 0; + sci_init_timer(&scic->timer, controller_timeout); + /* Set the default maximum values */ scic->completion_event_entries = SCU_EVENT_COUNT; scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; @@ -1901,24 +1931,6 @@ void scic_oem_parameters_get( memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); } -static void scic_sds_controller_timeout_handler(void *_scic) -{ - struct scic_sds_controller *scic = _scic; - struct isci_host *ihost = scic_to_ihost(scic); - struct sci_base_state_machine *sm = &scic->state_machine; - - if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) - scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); - else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) { - sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED); - isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); - } else /* / @todo Now what do we want to do in this case? */ - dev_err(scic_to_dev(scic), - "%s: Controller timer fired when controller was not " - "in a state being timed.\n", - __func__); -} - static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) { struct isci_host *ihost = scic_to_ihost(scic); @@ -2246,9 +2258,6 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); - scic->timeout_timer = isci_timer_create(ihost, scic, - scic_sds_controller_timeout_handler); - scic_sds_controller_initialize_phy_startup(scic); scic_sds_controller_initialize_power_control(scic); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 2be935f..8080866 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -137,10 +137,9 @@ struct scic_sds_controller { struct sci_base_state_machine state_machine; /** - * This field is the driver timer object handler used to time the controller - * object start and stop requests. + * Timer for controller start/stop operations. */ - void *timeout_timer; + struct sci_timer timer; /** * This field contains the user parameters to be utilized for this -- cgit v0.10.2 From bb3dbdf6c835a145e46119ed18a920a774694583 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 19 May 2011 20:26:02 -0700 Subject: isci: convert phy_startup_timer to sci_timer Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 156b375..e79f35d 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -917,21 +917,6 @@ static void scic_sds_controller_transition_to_ready( } } -static void scic_sds_controller_phy_timer_stop(struct scic_sds_controller *scic) -{ - isci_timer_stop(scic->phy_startup_timer); - - scic->phy_startup_timer_pending = false; -} - -static void scic_sds_controller_phy_timer_start(struct scic_sds_controller *scic) -{ - isci_timer_start(scic->phy_startup_timer, - SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); - - scic->phy_startup_timer_pending = true; -} - static bool is_phy_starting(struct scic_sds_phy *sci_phy) { enum scic_sds_phy_states state; @@ -1008,7 +993,8 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro * Inform the SCI Core user and transition to the READY state. */ if (is_controller_start_complete == true) { scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS); - scic_sds_controller_phy_timer_stop(scic); + sci_del_timer(&scic->phy_timer); + scic->phy_startup_timer_pending = false; } } else { sci_phy = &ihost->phys[scic->next_phy_to_start].sci; @@ -1033,7 +1019,9 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro status = scic_sds_phy_start(sci_phy); if (status == SCI_SUCCESS) { - scic_sds_controller_phy_timer_start(scic); + sci_mod_timer(&scic->phy_timer, + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); + scic->phy_startup_timer_pending = true; } else { dev_warn(scic_to_dev(scic), "%s: Controller stop operation failed " @@ -1050,15 +1038,27 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro return status; } -static void scic_sds_controller_phy_startup_timeout_handler(void *_scic) +static void phy_startup_timeout(unsigned long data) { - struct scic_sds_controller *scic = _scic; + struct sci_timer *tmr = (struct sci_timer *)data; + struct scic_sds_controller *scic = container_of(tmr, typeof(*scic), phy_timer); + struct isci_host *ihost = scic_to_ihost(scic); + unsigned long flags; enum sci_status status; + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + scic->phy_startup_timer_pending = false; - status = SCI_FAILURE; - while (status != SCI_SUCCESS) + + do { status = scic_sds_controller_start_next_phy(scic); + } while (status != SCI_SUCCESS); + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); } static enum sci_status scic_controller_start(struct scic_sds_controller *scic, @@ -1378,6 +1378,8 @@ void isci_host_deinit(struct isci_host *ihost) del_timer_sync(&ihost->sci.timer.timer); + del_timer_sync(&ihost->sci.phy_timer.timer); + isci_timer_list_destroy(ihost); } @@ -1931,24 +1933,6 @@ void scic_oem_parameters_get( memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); } -static enum sci_status scic_sds_controller_initialize_phy_startup(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - - scic->phy_startup_timer = isci_timer_create(ihost, - scic, - scic_sds_controller_phy_startup_timeout_handler); - - if (scic->phy_startup_timer == NULL) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; - else { - scic->next_phy_to_start = 0; - scic->phy_startup_timer_pending = false; - } - - return SCI_SUCCESS; -} - static void power_control_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; @@ -2258,7 +2242,10 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); - scic_sds_controller_initialize_phy_startup(scic); + sci_init_timer(&scic->phy_timer, phy_startup_timeout); + + scic->next_phy_to_start = 0; + scic->phy_startup_timer_pending = false; scic_sds_controller_initialize_power_control(scic); @@ -2640,7 +2627,8 @@ void scic_sds_controller_link_up(struct scic_sds_controller *scic, { switch (scic->state_machine.current_state_id) { case SCI_BASE_CONTROLLER_STATE_STARTING: - scic_sds_controller_phy_timer_stop(scic); + sci_del_timer(&scic->phy_timer); + scic->phy_startup_timer_pending = false; scic->port_agent.link_up_handler(scic, &scic->port_agent, port, phy); scic_sds_controller_start_next_phy(scic); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 8080866..9fd47b4 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -271,15 +271,14 @@ struct scic_sds_controller { /* Phy Startup Data */ /** - * This field is the driver timer handle for controller phy request startup. - * On controller start the controller will start each PHY individually in - * order of phy index. + * Timer for controller phy request startup. On controller start the + * controller will start each PHY individually in order of phy index. */ - void *phy_startup_timer; + struct sci_timer phy_timer; /** - * This field is set when the phy_startup_timer is running and is cleared when - * the phy_startup_timer is stopped. + * This field is set when the phy_timer is running and is cleared when + * the phy_timer is stopped. */ bool phy_startup_timer_pending; -- cgit v0.10.2 From fd18388bc5820b3e7807302ac18e8e7de83c9f4c Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 19 May 2011 12:00:15 +0000 Subject: isci: Remove tmf timeout_timer Replace the timeout_timer in the isci_tmf with a call to wait_for_completion_timeout Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 078e2ee..60b687b7 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -339,54 +339,6 @@ static enum sci_status isci_task_request_build( } /** - * isci_tmf_timeout_cb() - This function is called as a kernel callback when - * the timeout period for the TMF has expired. - * - * - */ -static void isci_tmf_timeout_cb(void *tmf_request_arg) -{ - struct isci_request *request = (struct isci_request *)tmf_request_arg; - struct isci_tmf *tmf = isci_request_access_tmf(request); - enum sci_status status; - - /* This task management request has timed-out. Terminate the request - * so that the request eventually completes to the requestor in the - * request completion callback path. - */ - /* Note - the timer callback function itself has provided spinlock - * exclusion from the start and completion paths. No need to take - * the request->isci_host->scic_lock here. - */ - - if (tmf->timeout_timer != NULL) { - /* Call the users callback, if any. */ - if (tmf->cb_state_func != NULL) - tmf->cb_state_func(isci_tmf_timed_out, tmf, - tmf->cb_data); - - /* Terminate the TMF transmit request. */ - status = scic_controller_terminate_request( - &request->isci_host->sci, - &request->isci_device->sci, - &request->sci); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: tmf_request = %p; tmf = %p; status = %d\n", - __func__, request, tmf, status); - } else - dev_dbg(&request->isci_host->pdev->dev, - "%s: timer already canceled! " - "tmf_request = %p; tmf = %p\n", - __func__, request, tmf); - - /* No need to unlock since the caller to this callback is doing it for - * us. - * request->isci_host->scic_lock - */ -} - -/** * isci_task_execute_tmf() - This function builds and sends a task request, * then waits for the completion. * @isci_host: This parameter specifies the ISCI host object @@ -410,6 +362,7 @@ int isci_task_execute_tmf( struct isci_request *request; int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; + unsigned long timeleft; /* sanity check, return TMF_RESP_FUNC_FAILED * if the device is not there and ready. @@ -443,17 +396,7 @@ int isci_task_execute_tmf( return TMF_RESP_FUNC_FAILED; } - /* Allocate the TMF timeout timer. */ spin_lock_irqsave(&isci_host->scic_lock, flags); - tmf->timeout_timer = isci_timer_create(isci_host, request, isci_tmf_timeout_cb); - - /* Start the timer. */ - if (tmf->timeout_timer) - isci_timer_start(tmf->timeout_timer, timeout_ms); - else - dev_warn(&isci_host->pdev->dev, - "%s: isci_timer_create failed!!!!\n", - __func__); /* start the TMF io. */ status = scic_controller_start_task( @@ -468,14 +411,13 @@ int isci_task_execute_tmf( __func__, status, request); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); goto cleanup_request; } - /* Call the users callback, if any. */ if (tmf->cb_state_func != NULL) tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data); - /* Change the state of the TMF-bearing request to "started". */ isci_request_change_state(request, started); /* add the request to the remote device request list. */ @@ -484,7 +426,22 @@ int isci_task_execute_tmf( spin_unlock_irqrestore(&isci_host->scic_lock, flags); /* Wait for the TMF to complete, or a timeout. */ - wait_for_completion(&completion); + timeleft = wait_for_completion_timeout(&completion, + jiffies + msecs_to_jiffies(timeout_ms)); + + if (timeleft == 0) { + spin_lock_irqsave(&isci_host->scic_lock, flags); + + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); + + status = scic_controller_terminate_request( + &request->isci_host->sci, + &request->isci_device->sci, + &request->sci); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + } isci_print_tmf(tmf); @@ -505,28 +462,12 @@ int isci_task_execute_tmf( request); if (request->io_request_completion != NULL) { - - /* The fact that this is non-NULL for a TMF request - * means there is a thread waiting for this TMF to - * finish. - */ + /* A thread is waiting for this TMF to finish. */ complete(request->io_request_completion); } - spin_lock_irqsave(&isci_host->scic_lock, flags); - cleanup_request: - - /* Clean up the timer if needed. */ - if (tmf->timeout_timer) { - isci_del_timer(isci_host, tmf->timeout_timer); - tmf->timeout_timer = NULL; - } - - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - isci_request_free(isci_host, request); - return ret; } @@ -546,7 +487,7 @@ void isci_task_build_tmf( tmf->device = isci_device; tmf->tmf_code = code; - tmf->timeout_timer = NULL; + tmf->cb_state_func = tmf_sent_cb; tmf->cb_data = cb_data; } @@ -1442,12 +1383,6 @@ isci_task_request_complete(struct isci_host *ihost, sizeof(struct dev_to_host_fis)); } - /* Manage the timer if it is still running. */ - if (tmf->timeout_timer) { - isci_del_timer(ihost, tmf->timeout_timer); - tmf->timeout_timer = NULL; - } - /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index c59dc96..432b81a 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -107,8 +107,6 @@ struct isci_tmf { enum isci_tmf_function_codes tmf_code; int status; - struct isci_timer *timeout_timer; - /* The optional callback function allows the user process to * track the TMF transmit / timeout conditions. */ -- cgit v0.10.2 From 8db02da52895285e99d7eb2fa825fd393e61d9c5 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 19 May 2011 12:00:22 +0000 Subject: isci: remove isci_timer interface Delete code which is no longer used. Signed-off-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 86b0c88..ad58fe3 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ - remote_device.o port.o timers.o \ + remote_device.o port.o \ host.o task.o probe_roms.o \ state_machine.o \ remote_node_context.o \ diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index e79f35d..8801955 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -67,7 +67,6 @@ #include "scu_remote_node_context.h" #include "scu_task_context.h" #include "scu_unsolicited_frame.h" -#include "timers.h" #define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 @@ -111,14 +110,6 @@ ) -#define SCIC_SDS_CONTROLLER_MIN_TIMER_COUNT 3 -#define SCIC_SDS_CONTROLLER_MAX_TIMER_COUNT 3 - -/** - * - * - * The number of milliseconds to wait for a phy to start. - */ #define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 /** @@ -1379,8 +1370,6 @@ void isci_host_deinit(struct isci_host *ihost) del_timer_sync(&ihost->sci.timer.timer); del_timer_sync(&ihost->sci.phy_timer.timer); - - isci_timer_list_destroy(ihost); } static void __iomem *scu_base(struct isci_host *isci_host) @@ -2517,8 +2506,6 @@ int isci_host_init(struct isci_host *isci_host) union scic_user_parameters scic_user_params; struct isci_pci_info *pci_info = to_pci_info(isci_host->pdev); - isci_timer_list_construct(isci_host); - spin_lock_init(&isci_host->state_lock); spin_lock_init(&isci_host->scic_lock); spin_lock_init(&isci_host->queue_lock); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 9fd47b4..4ce39e1 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -325,7 +325,6 @@ struct isci_host { union scic_oem_parameters oem_parameters; int id; /* unique within a given pci device */ - struct list_head timers; void *core_ctrl_memory; struct dma_pool *dma_pool; struct isci_phy phys[SCI_MAX_PHYS]; diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index b663bbd..fc196e3 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -57,7 +57,6 @@ #include "host.h" #include "phy.h" #include "scu_event_codes.h" -#include "timers.h" #include "probe_roms.h" /* Maximum arbitration wait time in micro-seconds */ diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 3da9048..8d88ca21a 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -56,7 +56,6 @@ #include "isci.h" #include "port.h" #include "request.h" -#include "timers.h" #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) #define SCU_DUMMY_INDEX (0xFFFF) diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index 1cde7b9..38401f6 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -54,7 +54,6 @@ */ #include "host.h" -#include "timers.h" #define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) #define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 60b687b7..93c7556 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -62,7 +62,6 @@ #include "request.h" #include "sata.h" #include "task.h" -#include "timers.h" /** * isci_task_refuse() - complete the request to the upper layer driver in diff --git a/drivers/scsi/isci/timers.c b/drivers/scsi/isci/timers.c deleted file mode 100644 index 007700e..0000000 --- a/drivers/scsi/isci/timers.c +++ /dev/null @@ -1,245 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "isci.h" -#include "timers.h" -#include "host.h" - -/** - * isci_timer_list_construct() - This method contrucst the SCI Timer List - * object used by the SCI Module class. The construction process involves - * creating isci_timer objects and adding them to the SCI Timer List - * object's list member. The number of isci_timer objects is determined by - * the timer_list_size parameter. - * @ihost: container of the timer list - * - * This method returns an error code indicating sucess or failure. The user - * should check for possible memory allocation error return otherwise, a zero - * indicates success. - */ -int isci_timer_list_construct(struct isci_host *ihost) -{ - struct isci_timer *itimer; - int i, err = 0; - - INIT_LIST_HEAD(&ihost->timers); - for (i = 0; i < SCI_MAX_TIMER_COUNT; i++) { - itimer = devm_kzalloc(&ihost->pdev->dev, sizeof(*itimer), GFP_KERNEL); - - if (!itimer) { - err = -ENOMEM; - break; - } - init_timer(&itimer->timer); - itimer->used = 0; - itimer->stopped = 1; - list_add(&itimer->node, &ihost->timers); - } - - return err; -} - -/** - * isci_timer_list_destroy() - This method destroys the SCI Timer List object - * used by the SCI Module class. The destruction process involves freeing - * memory allocated for isci_timer objects on the SCI Timer List object's - * timers list_head member. If any isci_timer objects are mark as "in use", - * they are not freed and the function returns an error code of -EBUSY. - * @ihost: container of the list to be destroyed - */ -void isci_timer_list_destroy(struct isci_host *ihost) -{ - struct isci_timer *timer; - LIST_HEAD(list); - - spin_lock_irq(&ihost->scic_lock); - list_splice_init(&ihost->timers, &list); - spin_unlock_irq(&ihost->scic_lock); - - list_for_each_entry(timer, &list, node) - del_timer_sync(&timer->timer); -} - -/** - * This method pulls an isci_timer object off of the list for the SCI Timer - * List object specified, marks the isci_timer as "in use" and initializes - * it with user callback function and cookie data. The timer is not start at - * this time, just reserved for the user. - * @isci_timer_list: This parameter points to the SCI Timer List from which the - * timer is reserved. - * @cookie: This parameter specifies a piece of information that the user must - * retain. This cookie is to be supplied by the user anytime a timeout - * occurs for the created timer. - * @timer_callback: This parameter specifies the callback method to be invoked - * whenever the timer expires. - * - * This method returns a pointer to an isci_timer object reserved from the SCI - * Timer List. The pointer will be utilized for all further interactions - * relating to this timer. - */ - -static void timer_function(unsigned long data) -{ - - struct isci_timer *timer = (struct isci_timer *)data; - struct isci_host *isci_host = timer->isci_host; - unsigned long flags; - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_timer = %p\n", __func__, timer); - - if (isci_stopped == isci_host_get_state(isci_host)) { - timer->stopped = 1; - return; - } - - spin_lock_irqsave(&isci_host->scic_lock, flags); - - if (!timer->stopped) { - timer->stopped = 1; - timer->timer_callback(timer->cb_param); - } - - spin_unlock_irqrestore(&isci_host->scic_lock, flags); -} - - -struct isci_timer *isci_timer_create(struct isci_host *ihost, void *cb_param, - void (*timer_callback)(void *)) -{ - struct timer_list *timer; - struct isci_timer *isci_timer; - struct list_head *list = &ihost->timers; - - WARN_ONCE(!spin_is_locked(&ihost->scic_lock), - "%s: unlocked!\n", __func__); - - if (WARN_ONCE(list_empty(list), "%s: timer pool empty\n", __func__)) - return NULL; - - isci_timer = list_entry(list->next, struct isci_timer, node); - - isci_timer->used = 1; - isci_timer->stopped = 1; - /* FIXME: what!? we recycle the timer, rather than take it off - * the free list? - */ - list_move_tail(&isci_timer->node, list); - - timer = &isci_timer->timer; - timer->data = (unsigned long)isci_timer; - timer->function = timer_function; - isci_timer->cb_param = cb_param; - isci_timer->timer_callback = timer_callback; - isci_timer->isci_host = ihost; - - dev_dbg(&ihost->pdev->dev, - "%s: isci_timer = %p\n", __func__, isci_timer); - - return isci_timer; -} - -/* isci_del_timer() - This method frees the isci_timer, marking it "free to - * use", then places its back at the head of the timers list for the SCI - * Timer List object specified. - */ -void isci_del_timer(struct isci_host *ihost, struct isci_timer *isci_timer) -{ - struct list_head *list = &ihost->timers; - - WARN_ONCE(!spin_is_locked(&ihost->scic_lock), - "%s unlocked!\n", __func__); - - dev_dbg(&isci_timer->isci_host->pdev->dev, - "%s: isci_timer = %p\n", __func__, isci_timer); - - isci_timer->used = 0; - list_move(&isci_timer->node, list); - del_timer(&isci_timer->timer); - isci_timer->stopped = 1; -} - -/** - * isci_timer_start() - This method starts the specified isci_timer, with the - * specified timeout value. - * @isci_timer: This parameter specifies the timer to be started. - * @timeout: This parameter specifies the timeout, in milliseconds, after which - * the associated callback function will be called. - * - */ -void isci_timer_start(struct isci_timer *isci_timer, unsigned long tmo) -{ - struct timer_list *timer = &isci_timer->timer; - - dev_dbg(&isci_timer->isci_host->pdev->dev, - "%s: isci_timer = %p\n", __func__, isci_timer); - - isci_timer->stopped = 0; - mod_timer(timer, jiffies + msecs_to_jiffies(tmo)); -} - -/** - * isci_timer_stop() - This method stops the supplied isci_timer. - * @isci_timer: This parameter specifies the isci_timer to be stopped. - * - */ -void isci_timer_stop(struct isci_timer *isci_timer) -{ - dev_dbg(&isci_timer->isci_host->pdev->dev, - "%s: isci_timer = %p\n", __func__, isci_timer); - - isci_timer->stopped = 1; - del_timer(&isci_timer->timer); -} diff --git a/drivers/scsi/isci/timers.h b/drivers/scsi/isci/timers.h deleted file mode 100644 index 8d8a892..0000000 --- a/drivers/scsi/isci/timers.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#if !defined(_SCI_TIMER_H_) -#define _SCI_TIMER_H_ - -#include -#include - -#define SCI_MAX_TIMER_COUNT 25 - -/** - * struct isci_timer - This class represents the timer object used by SCIC. It - * wraps the Linux timer_list object, and (TODO) should be removed in favor - * of a delayed-workqueue style interface with simpler locking - * - */ -struct isci_timer { - int used; - int stopped; - void *cb_param; - void (*timer_callback)(void *); - struct list_head node; - struct timer_list timer; - struct isci_host *isci_host; -}; - -int isci_timer_list_construct(struct isci_host *ihost); -void isci_timer_list_destroy(struct isci_host *ihost); -struct isci_timer *isci_timer_create(struct isci_host *ihost, void *cb_param, - void (*timer_callback)(void *)); -void isci_del_timer(struct isci_host *ihost, struct isci_timer *itimer); -void isci_timer_start(struct isci_timer *isci_timer, unsigned long timeout); -void isci_timer_stop(struct isci_timer *isci_timer); - -#endif /* !defined (_SCI_TIMER_H_) */ -- cgit v0.10.2 From 77d67385f7b4a630912fd567f104946be137f477 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 25 May 2011 02:21:57 +0000 Subject: isci: removing the kmalloc in smp request construct It doesn't look like there is any reason to do a kmalloc. We can do the byte swap in place and avoid the allocation. This allow us to remove a kmalloc and a memcpy. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 063ef04..7c0928e 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -3187,7 +3187,7 @@ static enum sci_status isci_request_stp_request_construct( */ static void scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, - struct smp_req *smp_req) + ssize_t req_len) { dma_addr_t dma_addr; struct scic_sds_controller *scic; @@ -3197,7 +3197,7 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32); /* byte swap the smp request. */ - sci_swab32_cpy(&sci_req->smp.cmd, smp_req, + sci_swab32_cpy(&sci_req->smp.cmd, &sci_req->smp.cmd, word_cnt); task_context = scic_sds_request_get_task_context(sci_req); @@ -3238,7 +3238,7 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, task_context->address_modifier = 0; /* 10h */ - task_context->ssp_command_iu_length = smp_req->req_len; + task_context->ssp_command_iu_length = req_len; /* 14h */ task_context->transfer_length_bytes = 0; @@ -3299,22 +3299,18 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, task_context->response_iu_lower = 0; } -static enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sci_req) +static enum sci_status +scic_io_request_construct_smp(struct scic_sds_request *sci_req) { - struct smp_req *smp_req = kmalloc(sizeof(*smp_req), GFP_KERNEL); - - if (!smp_req) - return SCI_FAILURE_INSUFFICIENT_RESOURCES; + struct smp_req *smp_req = &sci_req->smp.cmd; sci_req->protocol = SCIC_SMP_PROTOCOL; - /* Construct the SMP SCU Task Context */ - memcpy(smp_req, &sci_req->smp.cmd, sizeof(*smp_req)); - /* * Look at the SMP requests' header fields; for certain SAS 1.x SMP * functions under SAS 2.0, a zero request length really indicates - * a non-zero default length. */ + * a non-zero default length. + */ if (smp_req->req_len == 0) { switch (smp_req->func) { case SMP_DISCOVER: @@ -3332,12 +3328,10 @@ static enum sci_status scic_io_request_construct_smp(struct scic_sds_request *sc } } - scu_smp_request_construct_task_context(sci_req, smp_req); + scu_smp_request_construct_task_context(sci_req, smp_req->req_len); sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); - - kfree(smp_req); + SCI_BASE_REQUEST_STATE_CONSTRUCTED); return SCI_SUCCESS; } -- cgit v0.10.2 From bf482c6069b514b7fe57a048ae1b6f11cf3bb10c Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 25 May 2011 05:04:35 +0000 Subject: isci: Retrieve the EFI variable for OEM parameter We can call the EFI get_variable service routine directly to retrieve the EFI variable that holds the OEM parameters table. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 9bc173f..084fdc6 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -34,14 +34,8 @@ #include "task.h" #include "probe_roms.h" -struct efi_variable { - efi_char16_t VariableName[1024/sizeof(efi_char16_t)]; - efi_guid_t VendorGuid; - unsigned long DataSize; - __u8 Data[1024]; - efi_status_t Status; - __u32 Attributes; -} __attribute__((packed)); +static efi_char16_t isci_efivar_name[] = + {'R', 's', 't', 'S', 'c', 'u', 'O'}; struct isci_orom *isci_request_oprom(struct pci_dev *pdev) { @@ -169,62 +163,50 @@ struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmw static struct efi *get_efi(void) { - #ifdef CONFIG_EFI +#ifdef CONFIG_EFI return &efi; - #else +#else return NULL; - #endif +#endif } struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) { - struct efi_variable *evar; efi_status_t status; - struct isci_orom *rom = NULL; + struct isci_orom *rom; struct isci_oem_hdr *oem_hdr; u8 *tmp, sum; int j; - size_t copy_len; + ssize_t data_len; + u8 *efi_data; + u32 efi_attrib = 0; - evar = devm_kzalloc(&pdev->dev, - sizeof(struct efi_variable), - GFP_KERNEL); - if (!evar) { + data_len = 1024; + efi_data = devm_kzalloc(&pdev->dev, data_len, GFP_KERNEL); + if (!efi_data) { dev_warn(&pdev->dev, - "Unable to allocate memory for EFI var\n"); + "Unable to allocate memory for EFI data\n"); return NULL; } - rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL); - if (!rom) { - dev_warn(&pdev->dev, - "Unable to allocate memory for orom\n"); - return NULL; - } - - for (j = 0; j < strlen(ISCI_EFI_VAR_NAME) + 1; j++) - evar->VariableName[j] = ISCI_EFI_VAR_NAME[j]; - - evar->DataSize = 1024; - evar->VendorGuid = ISCI_EFI_VENDOR_GUID; - evar->Attributes = ISCI_EFI_ATTRIBUTES; + rom = (struct isci_orom *)(efi_data + sizeof(struct isci_oem_hdr)); if (get_efi()) - status = get_efi()->get_variable(evar->VariableName, - &evar->VendorGuid, - &evar->Attributes, - &evar->DataSize, - evar->Data); + status = get_efi()->get_variable(isci_efivar_name, + &ISCI_EFI_VENDOR_GUID, + &efi_attrib, + &data_len, + efi_data); else status = EFI_NOT_FOUND; if (status != EFI_SUCCESS) { dev_warn(&pdev->dev, - "Unable to obtain EFI variable for OEM parms\n"); + "Unable to obtain EFI var data for OEM parms\n"); return NULL; } - oem_hdr = (struct isci_oem_hdr *)evar->Data; + oem_hdr = (struct isci_oem_hdr *)efi_data; if (memcmp(oem_hdr->sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) != 0) { dev_warn(&pdev->dev, @@ -233,12 +215,8 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) } /* calculate checksum */ - tmp = (u8 *)oem_hdr; - for (j = 0, sum = 0; j < sizeof(oem_hdr); j++, tmp++) - sum += *tmp; - - tmp = (u8 *)rom; - for (j = 0; j < sizeof(*rom); j++, tmp++) + tmp = (u8 *)efi_data; + for (j = 0, sum = 0; j < (sizeof(*oem_hdr) + sizeof(*rom)); j++, tmp++) sum += *tmp; if (sum != 0) { @@ -247,11 +225,6 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) return NULL; } - copy_len = min_t(u16, evar->DataSize, - min_t(u16, oem_hdr->len - sizeof(*oem_hdr), sizeof(*rom))); - - memcpy(rom, (char *)evar->Data + sizeof(*oem_hdr), copy_len); - if (memcmp(rom->hdr.signature, ISCI_ROM_SIG, ISCI_ROM_SIG_SIZE) != 0) { diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 7e3e6d7..95c8d91 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -58,6 +58,7 @@ #ifdef __KERNEL__ #include #include +#include #include "isci.h" #define SCIC_SDS_PARM_NO_SPEED 0 @@ -202,7 +203,6 @@ struct isci_oem_hdr { #define ISCI_EFI_VENDOR_GUID \ EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \ 0x1a, 0x04, 0xc6) -#define ISCI_EFI_ATTRIBUTES 0 #define ISCI_EFI_VAR_NAME "RstScuO" /* Allowed PORT configuration modes APC Automatic PORT configuration mode is -- cgit v0.10.2 From 8d2c65c09c9e0adc16070562e7944c1c3277f332 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 1 Jun 2011 09:03:08 +0000 Subject: isci: Removing unused variables compiler warnings Newer gcc's are better at identifying "set, but not used" variables. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 7c0928e..31c9b2c 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -211,11 +211,9 @@ static void scu_ssp_reqeust_construct_task_context( struct scu_task_context *task_context) { dma_addr_t dma_addr; - struct scic_sds_controller *controller; struct scic_sds_remote_device *target_device; struct scic_sds_port *target_port; - controller = scic_sds_request_get_controller(sds_request); target_device = scic_sds_request_get_device(sds_request); target_port = scic_sds_request_get_port(sds_request); @@ -384,11 +382,9 @@ static void scu_sata_reqeust_construct_task_context( struct scu_task_context *task_context) { dma_addr_t dma_addr; - struct scic_sds_controller *controller; struct scic_sds_remote_device *target_device; struct scic_sds_port *target_port; - controller = scic_sds_request_get_controller(sci_req); target_device = scic_sds_request_get_device(sci_req); target_port = scic_sds_request_get_port(sci_req); @@ -677,12 +673,10 @@ enum sci_status scic_task_request_construct_ssp( static enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sci_req) { enum sci_status status; - struct scic_sds_stp_request *stp_req; bool copy = false; struct isci_request *isci_request = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(isci_request); - stp_req = &sci_req->stp.req; sci_req->protocol = SCIC_STP_PROTOCOL; copy = (task->data_dir == DMA_NONE) ? false : true; @@ -3190,7 +3184,6 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, ssize_t req_len) { dma_addr_t dma_addr; - struct scic_sds_controller *scic; struct scic_sds_remote_device *sci_dev; struct scic_sds_port *sci_port; struct scu_task_context *task_context; @@ -3202,7 +3195,6 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, task_context = scic_sds_request_get_task_context(sci_req); - scic = scic_sds_request_get_controller(sci_req); sci_dev = scic_sds_request_get_device(sci_req); sci_port = scic_sds_request_get_port(sci_req); diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 93c7556..b54ef2b 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1358,7 +1358,6 @@ isci_task_request_complete(struct isci_host *ihost, enum sci_task_status completion_status) { struct isci_remote_device *idev = ireq->isci_device; - enum isci_request_status old_state; struct isci_tmf *tmf = isci_request_access_tmf(ireq); struct completion *tmf_complete; struct scic_sds_request *sci_req = &ireq->sci; @@ -1367,7 +1366,7 @@ isci_task_request_complete(struct isci_host *ihost, "%s: request = %p, status=%d\n", __func__, ireq, completion_status); - old_state = isci_request_change_state(ireq, completed); + isci_request_change_state(ireq, completed); tmf->status = completion_status; ireq->complete_in_target = true; -- cgit v0.10.2 From e301370ac553a9a0ac0d1d25e769b86cf60395b3 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 2 Jun 2011 00:10:43 +0000 Subject: isci: state machine cleanup This cleans up several areas of the state machine mechanism: o Rename sci_base_state_machine_change_state to sci_change_state o Remove sci_base_state_machine_get_state function o Rename 'state_machine' struct member to 'sm' in client structs o Shorten the name of request states o Shorten state machine state names as follows: SCI_BASE_CONTROLLER_STATE_xxx to SCIC_xxx SCI_BASE_PHY_STATE_xxx to SCI_PHY_xxx SCIC_SDS_PHY_STARTING_SUBSTATE_xxx to SCI_PHY_SUB_xxx SCI_BASE_PORT_STATE_xxx to SCI_PORT_xxx and SCIC_SDS_PORT_READY_SUBSTATE_xxx to SCI_PORT_SUB_xxx SCI_BASE_REMOTE_DEVICE_STATE_xxx to SCI_DEV_xxx SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_STP_DEV_xxx SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_xxx to SCI_SMP_DEV_xxx SCIC_SDS_REMOTE_NODE_CONTEXT_xxx_STATE to SCI_RNC_xxx Signed-off-by: Edmund Nadolski Signed-off-by: Dave Jiang Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 8801955..81ee64c 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -635,8 +635,7 @@ static void scic_sds_controller_error_handler(struct scic_sds_controller *scic) dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, interrupt_status); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_FAILED); + sci_change_state(&scic->sm, SCIC_FAILED); return; } @@ -895,14 +894,12 @@ static void scic_sds_controller_transition_to_ready( { struct isci_host *ihost = scic_to_ihost(scic); - if (scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_STARTING) { + if (scic->sm.current_state_id == SCIC_STARTING) { /* * We move into the ready state, because some of the phys/ports * may be up and operational. */ - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_READY); + sci_change_state(&scic->sm, SCIC_READY); isci_host_start_complete(ihost, status); } @@ -912,18 +909,18 @@ static bool is_phy_starting(struct scic_sds_phy *sci_phy) { enum scic_sds_phy_states state; - state = sci_phy->state_machine.current_state_id; + state = sci_phy->sm.current_state_id; switch (state) { - case SCI_BASE_PHY_STATE_STARTING: - case SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: - case SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL: + case SCI_PHY_STARTING: + case SCI_PHY_SUB_INITIAL: + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: + case SCI_PHY_SUB_AWAIT_IAF_UF: + case SCI_PHY_SUB_AWAIT_SAS_POWER: + case SCI_PHY_SUB_AWAIT_SATA_POWER: + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: + case SCI_PHY_SUB_FINAL: return true; default: return false; @@ -957,7 +954,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro for (index = 0; index < SCI_MAX_PHYS; index++) { sci_phy = &ihost->phys[index].sci; - state = sci_phy->state_machine.current_state_id; + state = sci_phy->sm.current_state_id; if (!phy_get_non_dummy_port(sci_phy)) continue; @@ -968,12 +965,9 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro * - have an indication of a connected device and it has * finished the link training process. */ - if ((sci_phy->is_in_link_training == false && - state == SCI_BASE_PHY_STATE_INITIAL) || - (sci_phy->is_in_link_training == false && - state == SCI_BASE_PHY_STATE_STOPPED) || - (sci_phy->is_in_link_training == true && - is_phy_starting(sci_phy))) { + if ((sci_phy->is_in_link_training == false && state == SCI_PHY_INITIAL) || + (sci_phy->is_in_link_training == false && state == SCI_PHY_STOPPED) || + (sci_phy->is_in_link_training == true && is_phy_starting(sci_phy))) { is_controller_start_complete = false; break; } @@ -1059,8 +1053,7 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, enum sci_status result; u16 index; - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + if (scic->sm.current_state_id != SCIC_INITIALIZED) { dev_warn(scic_to_dev(scic), "SCIC Controller start operation requested in " "invalid state\n"); @@ -1108,8 +1101,7 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, sci_mod_timer(&scic->timer, timeout); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STARTING); + sci_change_state(&scic->sm, SCIC_STARTING); return SCI_SUCCESS; } @@ -1279,8 +1271,7 @@ static void isci_host_completion_routine(unsigned long data) static enum sci_status scic_controller_stop(struct scic_sds_controller *scic, u32 timeout) { - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { + if (scic->sm.current_state_id != SCIC_READY) { dev_warn(scic_to_dev(scic), "SCIC Controller stop operation requested in " "invalid state\n"); @@ -1288,8 +1279,7 @@ static enum sci_status scic_controller_stop(struct scic_sds_controller *scic, } sci_mod_timer(&scic->timer, timeout); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STOPPING); + sci_change_state(&scic->sm, SCIC_STOPPING); return SCI_SUCCESS; } @@ -1307,17 +1297,16 @@ static enum sci_status scic_controller_stop(struct scic_sds_controller *scic, */ static enum sci_status scic_controller_reset(struct scic_sds_controller *scic) { - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_RESET: - case SCI_BASE_CONTROLLER_STATE_READY: - case SCI_BASE_CONTROLLER_STATE_STOPPED: - case SCI_BASE_CONTROLLER_STATE_FAILED: + switch (scic->sm.current_state_id) { + case SCIC_RESET: + case SCIC_READY: + case SCIC_STOPPED: + case SCIC_FAILED: /* * The reset operation is not a graceful cleanup, just * perform the state transition. */ - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESETTING); + sci_change_state(&scic->sm, SCIC_RESETTING); return SCI_SUCCESS; default: dev_warn(scic_to_dev(scic), @@ -1416,15 +1405,14 @@ static void isci_user_parameters_get( static void scic_sds_controller_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESET); + sci_change_state(&scic->sm, SCIC_RESET); } static inline void scic_sds_controller_starting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); sci_del_timer(&scic->timer); } @@ -1551,7 +1539,7 @@ static enum sci_status scic_controller_set_interrupt_coalescence( static void scic_sds_controller_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); /* set the default interrupt coalescence number and timeout value. */ scic_controller_set_interrupt_coalescence(scic, 0x10, 250); @@ -1559,7 +1547,7 @@ static void scic_sds_controller_ready_state_enter(struct sci_base_state_machine static void scic_sds_controller_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); /* disable interrupt coalescence. */ scic_controller_set_interrupt_coalescence(scic, 0, 0); @@ -1650,7 +1638,7 @@ static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controll static void scic_sds_controller_stopping_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); /* Stop all of the components for this controller */ scic_sds_controller_stop_phys(scic); @@ -1660,7 +1648,7 @@ static void scic_sds_controller_stopping_state_enter(struct sci_base_state_machi static void scic_sds_controller_stopping_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); sci_del_timer(&scic->timer); } @@ -1691,36 +1679,35 @@ static void scic_sds_controller_reset_hardware(struct scic_sds_controller *scic) static void scic_sds_controller_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), state_machine); + struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); scic_sds_controller_reset_hardware(scic); - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_RESET); + sci_change_state(&scic->sm, SCIC_RESET); } static const struct sci_base_state scic_sds_controller_state_table[] = { - [SCI_BASE_CONTROLLER_STATE_INITIAL] = { + [SCIC_INITIAL] = { .enter_state = scic_sds_controller_initial_state_enter, }, - [SCI_BASE_CONTROLLER_STATE_RESET] = {}, - [SCI_BASE_CONTROLLER_STATE_INITIALIZING] = {}, - [SCI_BASE_CONTROLLER_STATE_INITIALIZED] = {}, - [SCI_BASE_CONTROLLER_STATE_STARTING] = { + [SCIC_RESET] = {}, + [SCIC_INITIALIZING] = {}, + [SCIC_INITIALIZED] = {}, + [SCIC_STARTING] = { .exit_state = scic_sds_controller_starting_state_exit, }, - [SCI_BASE_CONTROLLER_STATE_READY] = { + [SCIC_READY] = { .enter_state = scic_sds_controller_ready_state_enter, .exit_state = scic_sds_controller_ready_state_exit, }, - [SCI_BASE_CONTROLLER_STATE_RESETTING] = { + [SCIC_RESETTING] = { .enter_state = scic_sds_controller_resetting_state_enter, }, - [SCI_BASE_CONTROLLER_STATE_STOPPING] = { + [SCIC_STOPPING] = { .enter_state = scic_sds_controller_stopping_state_enter, .exit_state = scic_sds_controller_stopping_state_exit, }, - [SCI_BASE_CONTROLLER_STATE_STOPPED] = {}, - [SCI_BASE_CONTROLLER_STATE_FAILED] = {} + [SCIC_STOPPED] = {}, + [SCIC_FAILED] = {} }; static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) @@ -1774,7 +1761,7 @@ static void controller_timeout(unsigned long data) struct sci_timer *tmr = (struct sci_timer *)data; struct scic_sds_controller *scic = container_of(tmr, typeof(*scic), timer); struct isci_host *ihost = scic_to_ihost(scic); - struct sci_base_state_machine *sm = &scic->state_machine; + struct sci_base_state_machine *sm = &scic->sm; unsigned long flags; spin_lock_irqsave(&ihost->scic_lock, flags); @@ -1782,10 +1769,10 @@ static void controller_timeout(unsigned long data) if (tmr->cancel) goto done; - if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STARTING) + if (sm->current_state_id == SCIC_STARTING) scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); - else if (sm->current_state_id == SCI_BASE_CONTROLLER_STATE_STOPPING) { - sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_FAILED); + else if (sm->current_state_id == SCIC_STOPPING) { + sci_change_state(sm, SCIC_FAILED); isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); } else /* / @todo Now what do we want to do in this case? */ dev_err(scic_to_dev(scic), @@ -1820,11 +1807,11 @@ static enum sci_status scic_controller_construct(struct scic_sds_controller *sci struct isci_host *ihost = scic_to_ihost(scic); u8 i; - sci_base_state_machine_construct(&scic->state_machine, + sci_base_state_machine_construct(&scic->sm, scic_sds_controller_state_table, - SCI_BASE_CONTROLLER_STATE_INITIAL); + SCIC_INITIAL); - sci_base_state_machine_start(&scic->state_machine); + sci_base_state_machine_start(&scic->sm); scic->scu_registers = scu_base; scic->smu_registers = smu_base; @@ -1899,11 +1886,11 @@ int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) static enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, union scic_oem_parameters *scic_parms) { - u32 state = scic->state_machine.current_state_id; + u32 state = scic->sm.current_state_id; - if (state == SCI_BASE_CONTROLLER_STATE_RESET || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + if (state == SCIC_RESET || + state == SCIC_INITIALIZING || + state == SCIC_INITIALIZED) { if (scic_oem_parameters_validate(&scic_parms->sds1)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; @@ -2168,10 +2155,8 @@ static enum sci_status scic_controller_set_mode(struct scic_sds_controller *scic { enum sci_status status = SCI_SUCCESS; - if ((scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_INITIALIZING) || - (scic->state_machine.current_state_id == - SCI_BASE_CONTROLLER_STATE_INITIALIZED)) { + if ((scic->sm.current_state_id == SCIC_INITIALIZING) || + (scic->sm.current_state_id == SCIC_INITIALIZED)) { switch (operating_mode) { case SCI_MODE_SPEED: scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; @@ -2216,20 +2201,19 @@ static void scic_sds_controller_initialize_power_control(struct scic_sds_control static enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) { - struct sci_base_state_machine *sm = &scic->state_machine; + struct sci_base_state_machine *sm = &scic->sm; enum sci_status result = SCI_SUCCESS; struct isci_host *ihost = scic_to_ihost(scic); u32 index, state; - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_RESET) { + if (scic->sm.current_state_id != SCIC_RESET) { dev_warn(scic_to_dev(scic), "SCIC Controller initialize operation requested " "in invalid state\n"); return SCI_FAILURE_INVALID_STATE; } - sci_base_state_machine_change_state(sm, SCI_BASE_CONTROLLER_STATE_INITIALIZING); + sci_change_state(sm, SCIC_INITIALIZING); sci_init_timer(&scic->phy_timer, phy_startup_timeout); @@ -2374,10 +2358,10 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc /* Advance the controller state machine */ if (result == SCI_SUCCESS) - state = SCI_BASE_CONTROLLER_STATE_INITIALIZED; + state = SCIC_INITIALIZED; else - state = SCI_BASE_CONTROLLER_STATE_FAILED; - sci_base_state_machine_change_state(sm, state); + state = SCIC_FAILED; + sci_change_state(sm, state); return result; } @@ -2386,11 +2370,11 @@ static enum sci_status scic_user_parameters_set( struct scic_sds_controller *scic, union scic_user_parameters *scic_parms) { - u32 state = scic->state_machine.current_state_id; + u32 state = scic->sm.current_state_id; - if (state == SCI_BASE_CONTROLLER_STATE_RESET || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZING || - state == SCI_BASE_CONTROLLER_STATE_INITIALIZED) { + if (state == SCIC_RESET || + state == SCIC_INITIALIZING || + state == SCIC_INITIALIZED) { u16 index; /* @@ -2612,15 +2596,15 @@ int isci_host_init(struct isci_host *isci_host) void scic_sds_controller_link_up(struct scic_sds_controller *scic, struct scic_sds_port *port, struct scic_sds_phy *phy) { - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STARTING: + switch (scic->sm.current_state_id) { + case SCIC_STARTING: sci_del_timer(&scic->phy_timer); scic->phy_startup_timer_pending = false; scic->port_agent.link_up_handler(scic, &scic->port_agent, port, phy); scic_sds_controller_start_next_phy(scic); break; - case SCI_BASE_CONTROLLER_STATE_READY: + case SCIC_READY: scic->port_agent.link_up_handler(scic, &scic->port_agent, port, phy); break; @@ -2628,16 +2612,16 @@ void scic_sds_controller_link_up(struct scic_sds_controller *scic, dev_dbg(scic_to_dev(scic), "%s: SCIC Controller linkup event from phy %d in " "unexpected state %d\n", __func__, phy->phy_index, - scic->state_machine.current_state_id); + scic->sm.current_state_id); } } void scic_sds_controller_link_down(struct scic_sds_controller *scic, struct scic_sds_port *port, struct scic_sds_phy *phy) { - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STARTING: - case SCI_BASE_CONTROLLER_STATE_READY: + switch (scic->sm.current_state_id) { + case SCIC_STARTING: + case SCIC_READY: scic->port_agent.link_down_handler(scic, &scic->port_agent, port, phy); break; @@ -2647,7 +2631,7 @@ void scic_sds_controller_link_down(struct scic_sds_controller *scic, "unexpected state %d\n", __func__, phy->phy_index, - scic->state_machine.current_state_id); + scic->sm.current_state_id); } } @@ -2663,8 +2647,7 @@ static bool scic_sds_controller_has_remote_devices_stopping( for (index = 0; index < controller->remote_node_entries; index++) { if ((controller->device_table[index] != NULL) && - (controller->device_table[index]->state_machine.current_state_id - == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)) + (controller->device_table[index]->sm.current_state_id == SCI_DEV_STOPPING)) return true; } @@ -2678,19 +2661,17 @@ static bool scic_sds_controller_has_remote_devices_stopping( void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev) { - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_STOPPING) { + if (scic->sm.current_state_id != SCIC_STOPPING) { dev_dbg(scic_to_dev(scic), "SCIC Controller 0x%p remote device stopped event " "from device 0x%p in unexpected state %d\n", scic, sci_dev, - scic->state_machine.current_state_id); + scic->sm.current_state_id); return; } if (!scic_sds_controller_has_remote_devices_stopping(scic)) { - sci_base_state_machine_change_state(&scic->state_machine, - SCI_BASE_CONTROLLER_STATE_STOPPED); + sci_change_state(&scic->sm, SCIC_STOPPED); } } @@ -2948,8 +2929,7 @@ enum sci_status scic_controller_start_io( { enum sci_status status; - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { + if (scic->sm.current_state_id != SCIC_READY) { dev_warn(scic_to_dev(scic), "invalid state to start I/O"); return SCI_FAILURE_INVALID_STATE; } @@ -2986,8 +2966,7 @@ enum sci_status scic_controller_terminate_request( { enum sci_status status; - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { + if (scic->sm.current_state_id != SCIC_READY) { dev_warn(scic_to_dev(scic), "invalid state to terminate request\n"); return SCI_FAILURE_INVALID_STATE; @@ -3037,11 +3016,11 @@ enum sci_status scic_controller_complete_io( enum sci_status status; u16 index; - switch (scic->state_machine.current_state_id) { - case SCI_BASE_CONTROLLER_STATE_STOPPING: + switch (scic->sm.current_state_id) { + case SCIC_STOPPING: /* XXX: Implement this function */ return SCI_FAILURE; - case SCI_BASE_CONTROLLER_STATE_READY: + case SCIC_READY: status = scic_sds_remote_device_complete_io(scic, rdev, request); if (status != SCI_SUCCESS) return status; @@ -3060,8 +3039,7 @@ enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) { struct scic_sds_controller *scic = sci_req->owning_controller; - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { + if (scic->sm.current_state_id != SCIC_READY) { dev_warn(scic_to_dev(scic), "invalid state to continue I/O"); return SCI_FAILURE_INVALID_STATE; } @@ -3107,8 +3085,7 @@ enum sci_task_status scic_controller_start_task( { enum sci_status status; - if (scic->state_machine.current_state_id != - SCI_BASE_CONTROLLER_STATE_READY) { + if (scic->sm.current_state_id != SCIC_READY) { dev_warn(scic_to_dev(scic), "%s: SCIC Controller starting task from invalid " "state\n", diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 4ce39e1..be09765 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -134,7 +134,7 @@ struct scic_sds_controller { * This field contains the information for the base controller state * machine. */ - struct sci_base_state_machine state_machine; + struct sci_base_state_machine sm; /** * Timer for controller start/stop operations. @@ -359,7 +359,7 @@ enum scic_sds_controller_states { /** * Simply the initial state for the base controller state machine. */ - SCI_BASE_CONTROLLER_STATE_INITIAL = 0, + SCIC_INITIAL = 0, /** * This state indicates that the controller is reset. The memory for @@ -368,7 +368,7 @@ enum scic_sds_controller_states { * This state is entered from the INITIAL state. * This state is entered from the RESETTING state. */ - SCI_BASE_CONTROLLER_STATE_RESET, + SCIC_RESET, /** * This state is typically an action state that indicates the controller @@ -376,28 +376,28 @@ enum scic_sds_controller_states { * are permitted. * This state is entered from the RESET state. */ - SCI_BASE_CONTROLLER_STATE_INITIALIZING, + SCIC_INITIALIZING, /** * This state indicates that the controller has been successfully * initialized. In this state no new IO operations are permitted. * This state is entered from the INITIALIZING state. */ - SCI_BASE_CONTROLLER_STATE_INITIALIZED, + SCIC_INITIALIZED, /** * This state indicates the the controller is in the process of becoming * ready (i.e. starting). In this state no new IO operations are permitted. * This state is entered from the INITIALIZED state. */ - SCI_BASE_CONTROLLER_STATE_STARTING, + SCIC_STARTING, /** * This state indicates the controller is now ready. Thus, the user * is able to perform IO operations on the controller. * This state is entered from the STARTING state. */ - SCI_BASE_CONTROLLER_STATE_READY, + SCIC_READY, /** * This state is typically an action state that indicates the controller @@ -408,7 +408,7 @@ enum scic_sds_controller_states { * This state is entered from the FAILED state. * This state is entered from the STOPPED state. */ - SCI_BASE_CONTROLLER_STATE_RESETTING, + SCIC_RESETTING, /** * This state indicates that the controller is in the process of stopping. @@ -416,14 +416,14 @@ enum scic_sds_controller_states { * operations are allowed to complete. * This state is entered from the READY state. */ - SCI_BASE_CONTROLLER_STATE_STOPPING, + SCIC_STOPPING, /** * This state indicates that the controller has successfully been stopped. * In this state no new IO operations are permitted. * This state is entered from the STOPPING state. */ - SCI_BASE_CONTROLLER_STATE_STOPPED, + SCIC_STOPPED, /** * This state indicates that the controller could not successfully be @@ -433,10 +433,7 @@ enum scic_sds_controller_states { * This state is entered from the STOPPING state. * This state is entered from the RESETTING state. */ - SCI_BASE_CONTROLLER_STATE_FAILED, - - SCI_BASE_CONTROLLER_MAX_STATES - + SCIC_FAILED, }; diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index fc196e3..9de21c7 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -249,8 +249,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); + sci_change_state(&sci_phy->sm, SCI_PHY_STOPPED); return SCI_SUCCESS; } @@ -273,8 +272,7 @@ static void phy_sata_timeout(unsigned long data) __func__, sci_phy); - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } @@ -342,8 +340,7 @@ enum sci_status scic_sds_phy_initialize( /* * There is nothing that needs to be done in this state just * transition to the stopped state. */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); + sci_change_state(&sci_phy->sm, SCI_PHY_STOPPED); return SCI_SUCCESS; } @@ -436,34 +433,33 @@ void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) { - enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + enum scic_sds_phy_states state = sci_phy->sm.current_state_id; - if (state != SCI_BASE_PHY_STATE_STOPPED) { + if (state != SCI_PHY_STOPPED) { dev_dbg(sciphy_to_dev(sci_phy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); return SCI_SUCCESS; } enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) { - enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + enum scic_sds_phy_states state = sci_phy->sm.current_state_id; switch (state) { - case SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN: - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: - case SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL: - case SCI_BASE_PHY_STATE_READY: + case SCI_PHY_SUB_INITIAL: + case SCI_PHY_SUB_AWAIT_OSSP_EN: + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SAS_POWER: + case SCI_PHY_SUB_AWAIT_SATA_POWER: + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: + case SCI_PHY_SUB_FINAL: + case SCI_PHY_READY: break; default: dev_dbg(sciphy_to_dev(sci_phy), @@ -471,32 +467,30 @@ enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) return SCI_FAILURE_INVALID_STATE; } - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STOPPED); + sci_change_state(&sci_phy->sm, SCI_PHY_STOPPED); return SCI_SUCCESS; } enum sci_status scic_sds_phy_reset(struct scic_sds_phy *sci_phy) { - enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + enum scic_sds_phy_states state = sci_phy->sm.current_state_id; - if (state != SCI_BASE_PHY_STATE_READY) { + if (state != SCI_PHY_READY) { dev_dbg(sciphy_to_dev(sci_phy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_RESETTING); + sci_change_state(&sci_phy->sm, SCI_PHY_RESETTING); return SCI_SUCCESS; } enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy) { - enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + enum scic_sds_phy_states state = sci_phy->sm.current_state_id; switch (state) { - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: { + case SCI_PHY_SUB_AWAIT_SAS_POWER: { u32 enable_spinup; enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); @@ -504,12 +498,11 @@ enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy) writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_FINAL); return SCI_SUCCESS; } - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: { + case SCI_PHY_SUB_AWAIT_SATA_POWER: { u32 scu_sas_pcfg_value; /* Release the spinup hold state and reset the OOB state machine */ @@ -528,8 +521,7 @@ enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy) &sci_phy->link_layer_registers->phy_configuration); /* Change state to the final state this substate machine has run to completion */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SATA_PHY_EN); return SCI_SUCCESS; } @@ -566,10 +558,7 @@ static void scic_sds_phy_start_sas_link_training( writel(phy_control, &sci_phy->link_layer_registers->phy_configuration); - sci_base_state_machine_change_state( - &sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN - ); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN); sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; } @@ -585,10 +574,7 @@ static void scic_sds_phy_start_sas_link_training( static void scic_sds_phy_start_sata_link_training( struct scic_sds_phy *sci_phy) { - sci_base_state_machine_change_state( - &sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER - ); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER); sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; } @@ -611,17 +597,16 @@ static void scic_sds_phy_complete_link_training( { sci_phy->max_negotiated_speed = max_link_rate; - sci_base_state_machine_change_state(&sci_phy->state_machine, - next_state); + sci_change_state(&sci_phy->sm, next_state); } enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, u32 event_code) { - enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + enum scic_sds_phy_states state = sci_phy->sm.current_state_id; switch (state) { - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN: + case SCI_PHY_SUB_AWAIT_OSSP_EN: switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: scic_sds_phy_start_sas_link_training(sci_phy); @@ -640,7 +625,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, return SCI_FAILURE; } return SCI_SUCCESS; - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: /* @@ -652,21 +637,21 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + SCI_PHY_SUB_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_30: case SCU_EVENT_SAS_30_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + SCI_PHY_SUB_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_60: case SCU_EVENT_SAS_60_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF); + SCI_PHY_SUB_AWAIT_IAF_UF); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* @@ -676,8 +661,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; default: dev_warn(sciphy_to_dev(sci_phy), @@ -689,7 +673,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, break; } return SCI_SUCCESS; - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF: + case SCI_PHY_SUB_AWAIT_IAF_UF: switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: /* Backup the state machine */ @@ -706,8 +690,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, case SCU_EVENT_LINK_FAILURE: case SCU_EVENT_HARD_RESET_RECEIVED: /* Start the oob/sn state machine over again */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; default: dev_warn(sciphy_to_dev(sci_phy), @@ -717,12 +700,11 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, return SCI_FAILURE; } return SCI_SUCCESS; - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER: + case SCI_PHY_SUB_AWAIT_SAS_POWER: switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; default: dev_warn(sciphy_to_dev(sci_phy), @@ -733,12 +715,11 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, return SCI_FAILURE; } return SCI_SUCCESS; - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER: + case SCI_PHY_SUB_AWAIT_SATA_POWER: switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* These events are received every 10ms and are @@ -762,12 +743,11 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, return SCI_FAILURE; } return SCI_SUCCESS; - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN: + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* These events might be received since we dont know how many may be in @@ -778,8 +758,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; /* We have received the SATA PHY notification change state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); break; case SCU_EVENT_SAS_PHY_DETECTED: /* There has been a change in the phy type before OOB/SN for the @@ -797,7 +776,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, return SCI_FAILURE;; } return SCI_SUCCESS; - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: switch (scu_get_event_code(event_code)) { case SCU_EVENT_SATA_PHY_DETECTED: /* @@ -809,26 +788,25 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_1_5_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_30: case SCU_EVENT_SATA_30_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_3_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_60: case SCU_EVENT_SATA_60_SSC: scic_sds_phy_complete_link_training( sci_phy, SAS_LINK_RATE_6_0_GBPS, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF); + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; case SCU_EVENT_SAS_PHY_DETECTED: /* @@ -846,18 +824,16 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, } return SCI_SUCCESS; - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: switch (scu_get_event_code(event_code)) { case SCU_EVENT_SATA_PHY_DETECTED: /* Backup the state machine */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; default: @@ -870,12 +846,11 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, return SCI_FAILURE; } return SCI_SUCCESS; - case SCI_BASE_PHY_STATE_READY: + case SCI_PHY_READY: switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; case SCU_EVENT_BROADCAST_CHANGE: /* Broadcast change received. Notify the port. */ @@ -892,12 +867,11 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, return SCI_FAILURE_INVALID_STATE; } return SCI_SUCCESS; - case SCI_BASE_PHY_STATE_RESETTING: + case SCI_PHY_RESETTING: switch (scu_get_event_code(event_code)) { case SCU_EVENT_HARD_RESET_TRANSMITTED: /* Link failure change state back to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); break; default: dev_warn(sciphy_to_dev(sci_phy), @@ -919,12 +893,12 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, u32 frame_index) { - enum scic_sds_phy_states state = sci_phy->state_machine.current_state_id; + enum scic_sds_phy_states state = sci_phy->sm.current_state_id; struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; enum sci_status result; switch (state) { - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF: { + case SCI_PHY_SUB_AWAIT_IAF_UF: { u32 *frame_words; struct sas_identify_frame iaf; struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); @@ -946,15 +920,14 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, * state since there are no power requirements for * expander phys. */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL; + state = SCI_PHY_SUB_FINAL; } else { /* We got the IAF we can now go to the await spinup * semaphore state */ - state = SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER; + state = SCI_PHY_SUB_AWAIT_SAS_POWER; } - sci_base_state_machine_change_state(&sci_phy->state_machine, - state); + sci_change_state(&sci_phy->sm, state); result = SCI_SUCCESS; } else dev_warn(sciphy_to_dev(sci_phy), @@ -965,7 +938,7 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, scic_sds_controller_release_frame(scic, frame_index); return result; } - case SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF: { + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: { struct dev_to_host_fis *frame_header; u32 *fis_frame_data; struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); @@ -989,8 +962,7 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, fis_frame_data); /* got IAF we can now go to the await spinup semaphore state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_FINAL); result = SCI_SUCCESS; } else @@ -1014,16 +986,15 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); /* This is just an temporary state go off to the starting state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN); } static void scic_sds_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; scic_sds_controller_power_control_queue_insert(scic, sci_phy); @@ -1031,7 +1002,7 @@ static void scic_sds_phy_starting_await_sas_power_substate_enter(struct sci_base static void scic_sds_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; scic_sds_controller_power_control_queue_remove(scic, sci_phy); @@ -1039,7 +1010,7 @@ static void scic_sds_phy_starting_await_sas_power_substate_exit(struct sci_base_ static void scic_sds_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; scic_sds_controller_power_control_queue_insert(scic, sci_phy); @@ -1047,7 +1018,7 @@ static void scic_sds_phy_starting_await_sata_power_substate_enter(struct sci_bas static void scic_sds_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; scic_sds_controller_power_control_queue_remove(scic, sci_phy); @@ -1055,35 +1026,35 @@ static void scic_sds_phy_starting_await_sata_power_substate_exit(struct sci_base static void scic_sds_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); sci_mod_timer(&sci_phy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } static void scic_sds_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); sci_del_timer(&sci_phy->sata_timer); } static void scic_sds_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); sci_mod_timer(&sci_phy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } static void scic_sds_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); sci_del_timer(&sci_phy->sata_timer); } static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); if (scic_sds_port_link_detected(sci_phy->owning_port, sci_phy)) { @@ -1103,20 +1074,19 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_bas static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); sci_del_timer(&sci_phy->sata_timer); } static void scic_sds_phy_starting_final_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); /* State machine has run to completion so exit out and change * the base state machine to the ready state */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_READY); + sci_change_state(&sci_phy->sm, SCI_PHY_READY); } /** @@ -1202,7 +1172,7 @@ static void scu_link_layer_tx_hard_reset( static void scic_sds_phy_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); /* * @todo We need to get to the controller to place this PE in a @@ -1212,7 +1182,7 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_state_machine *sm) scu_link_layer_stop_protocol_engine(sci_phy); - if (sci_phy->state_machine.previous_state_id != SCI_BASE_PHY_STATE_INITIAL) + if (sci_phy->sm.previous_state_id != SCI_PHY_INITIAL) scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), phy_get_non_dummy_port(sci_phy), sci_phy); @@ -1220,7 +1190,7 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_state_machine *sm) static void scic_sds_phy_starting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); scu_link_layer_stop_protocol_engine(sci_phy); scu_link_layer_start_oob(sci_phy); @@ -1229,18 +1199,17 @@ static void scic_sds_phy_starting_state_enter(struct sci_base_state_machine *sm) sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; sci_phy->bcn_received_while_port_unassigned = false; - if (sci_phy->state_machine.previous_state_id == SCI_BASE_PHY_STATE_READY) + if (sci_phy->sm.previous_state_id == SCI_PHY_READY) scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), phy_get_non_dummy_port(sci_phy), sci_phy); - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL); + sci_change_state(&sci_phy->sm, SCI_PHY_SUB_INITIAL); } static void scic_sds_phy_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); scic_sds_controller_link_up(scic_sds_phy_get_controller(sci_phy), phy_get_non_dummy_port(sci_phy), @@ -1250,14 +1219,14 @@ static void scic_sds_phy_ready_state_enter(struct sci_base_state_machine *sm) static void scic_sds_phy_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); scic_sds_phy_suspend(sci_phy); } static void scic_sds_phy_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), state_machine); + struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); /* The phy is being reset, therefore deactivate it from the port. In * the resetting state we don't notify the user regarding link up and @@ -1271,66 +1240,65 @@ static void scic_sds_phy_resetting_state_enter(struct sci_base_state_machine *sm /* The SCU does not need to have a discrete reset state so * just go back to the starting state. */ - sci_base_state_machine_change_state(&sci_phy->state_machine, - SCI_BASE_PHY_STATE_STARTING); + sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); } } static const struct sci_base_state scic_sds_phy_state_table[] = { - [SCI_BASE_PHY_STATE_INITIAL] = { }, - [SCI_BASE_PHY_STATE_STOPPED] = { + [SCI_PHY_INITIAL] = { }, + [SCI_PHY_STOPPED] = { .enter_state = scic_sds_phy_stopped_state_enter, }, - [SCI_BASE_PHY_STATE_STARTING] = { + [SCI_PHY_STARTING] = { .enter_state = scic_sds_phy_starting_state_enter, }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL] = { + [SCI_PHY_SUB_INITIAL] = { .enter_state = scic_sds_phy_starting_initial_substate_enter, }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN] = { }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN] = { }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF] = { }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER] = { + [SCI_PHY_SUB_AWAIT_OSSP_EN] = { }, + [SCI_PHY_SUB_AWAIT_SAS_SPEED_EN] = { }, + [SCI_PHY_SUB_AWAIT_IAF_UF] = { }, + [SCI_PHY_SUB_AWAIT_SAS_POWER] = { .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER] = { + [SCI_PHY_SUB_AWAIT_SATA_POWER] = { .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN] = { + [SCI_PHY_SUB_AWAIT_SATA_PHY_EN] = { .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN] = { + [SCI_PHY_SUB_AWAIT_SATA_SPEED_EN] = { .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF] = { + [SCI_PHY_SUB_AWAIT_SIG_FIS_UF] = { .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit }, - [SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL] = { + [SCI_PHY_SUB_FINAL] = { .enter_state = scic_sds_phy_starting_final_substate_enter, }, - [SCI_BASE_PHY_STATE_READY] = { + [SCI_PHY_READY] = { .enter_state = scic_sds_phy_ready_state_enter, .exit_state = scic_sds_phy_ready_state_exit, }, - [SCI_BASE_PHY_STATE_RESETTING] = { + [SCI_PHY_RESETTING] = { .enter_state = scic_sds_phy_resetting_state_enter, }, - [SCI_BASE_PHY_STATE_FINAL] = { }, + [SCI_PHY_FINAL] = { }, }; void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, struct scic_sds_port *owning_port, u8 phy_index) { - sci_base_state_machine_construct(&sci_phy->state_machine, + sci_base_state_machine_construct(&sci_phy->sm, scic_sds_phy_state_table, - SCI_BASE_PHY_STATE_INITIAL); + SCI_PHY_INITIAL); - sci_base_state_machine_start(&sci_phy->state_machine); + sci_base_state_machine_start(&sci_phy->sm); /* Copy the rest of the input data to our locals */ sci_phy->owning_port = owning_port; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index da3f0f1..9d21d27 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -94,7 +94,7 @@ struct scic_sds_phy { /** * This field contains the information for the base phy state machine. */ - struct sci_base_state_machine state_machine; + struct sci_base_state_machine sm; /** * This field specifies the port object that owns/contains this phy. @@ -410,7 +410,7 @@ enum scic_sds_phy_states { /** * Simply the initial state for the base domain state machine. */ - SCI_BASE_PHY_STATE_INITIAL, + SCI_PHY_INITIAL, /** * This state indicates that the phy has successfully been stopped. @@ -420,7 +420,7 @@ enum scic_sds_phy_states { * This state is entered from the READY state. * This state is entered from the RESETTING state. */ - SCI_BASE_PHY_STATE_STOPPED, + SCI_PHY_STOPPED, /** * This state indicates that the phy is in the process of becomming @@ -429,57 +429,57 @@ enum scic_sds_phy_states { * This state is entered from the READY state. * This state is entered from the RESETTING state. */ - SCI_BASE_PHY_STATE_STARTING, + SCI_PHY_STARTING, /** * Initial state */ - SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL, + SCI_PHY_SUB_INITIAL, /** * Wait state for the hardware OSSP event type notification */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN, + SCI_PHY_SUB_AWAIT_OSSP_EN, /** * Wait state for the PHY speed notification */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN, + SCI_PHY_SUB_AWAIT_SAS_SPEED_EN, /** * Wait state for the IAF Unsolicited frame notification */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF, + SCI_PHY_SUB_AWAIT_IAF_UF, /** * Wait state for the request to consume power */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER, + SCI_PHY_SUB_AWAIT_SAS_POWER, /** * Wait state for request to consume power */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER, + SCI_PHY_SUB_AWAIT_SATA_POWER, /** * Wait state for the SATA PHY notification */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN, + SCI_PHY_SUB_AWAIT_SATA_PHY_EN, /** * Wait for the SATA PHY speed notification */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN, + SCI_PHY_SUB_AWAIT_SATA_SPEED_EN, /** * Wait state for the SIGNATURE FIS unsolicited frame notification */ - SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF, /** * Exit state for this state machine */ - SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL, + SCI_PHY_SUB_FINAL, /** * This state indicates the the phy is now ready. Thus, the user @@ -487,19 +487,19 @@ enum scic_sds_phy_states { * is currently part of a valid port. * This state is entered from the STARTING state. */ - SCI_BASE_PHY_STATE_READY, + SCI_PHY_READY, /** * This state indicates that the phy is in the process of being reset. * In this state no new IO operations are permitted on this phy. * This state is entered from the READY state. */ - SCI_BASE_PHY_STATE_RESETTING, + SCI_PHY_RESETTING, /** * Simply the final state for the base phy state machine. */ - SCI_BASE_PHY_STATE_FINAL, + SCI_PHY_FINAL, }; /** diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 8d88ca21a..6370b93 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -807,10 +807,10 @@ static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port, static bool is_port_ready_state(enum scic_sds_port_states state) { switch (state) { - case SCI_BASE_PORT_STATE_READY: - case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: - case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: - case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + case SCI_PORT_READY: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + case SCI_PORT_SUB_CONFIGURING: return true; default: return false; @@ -821,13 +821,13 @@ static bool is_port_ready_state(enum scic_sds_port_states state) static void port_state_machine_change(struct scic_sds_port *sci_port, enum scic_sds_port_states state) { - struct sci_base_state_machine *sm = &sci_port->state_machine; + struct sci_base_state_machine *sm = &sci_port->sm; enum scic_sds_port_states old_state = sm->current_state_id; if (is_port_ready_state(old_state) && !is_port_ready_state(state)) sci_port->ready_exit = true; - sci_base_state_machine_change_state(sm, state); + sci_change_state(sm, state); sci_port->ready_exit = false; } @@ -862,11 +862,11 @@ static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port if ((phy_sas_address.high == port_sas_address.high && phy_sas_address.low == port_sas_address.low) || sci_port->active_phy_mask == 0) { - struct sci_base_state_machine *sm = &sci_port->state_machine; + struct sci_base_state_machine *sm = &sci_port->sm; scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user); - if (sm->current_state_id == SCI_BASE_PORT_STATE_RESETTING) - port_state_machine_change(sci_port, SCI_BASE_PORT_STATE_READY); + if (sm->current_state_id == SCI_PORT_RESETTING) + port_state_machine_change(sci_port, SCI_PORT_READY); } else scic_sds_port_invalid_link_up(sci_port, sci_phy); } @@ -938,14 +938,14 @@ static void port_timeout(unsigned long data) if (tmr->cancel) goto done; - current_state = sci_base_state_machine_get_state(&sci_port->state_machine); + current_state = sci_port->sm.current_state_id; - if (current_state == SCI_BASE_PORT_STATE_RESETTING) { + if (current_state == SCI_PORT_RESETTING) { /* if the port is still in the resetting state then the timeout * fired before the reset completed. */ - port_state_machine_change(sci_port, SCI_BASE_PORT_STATE_FAILED); - } else if (current_state == SCI_BASE_PORT_STATE_STOPPED) { + port_state_machine_change(sci_port, SCI_PORT_FAILED); + } else if (current_state == SCI_PORT_STOPPED) { /* if the port is stopped then the start request failed In this * case stay in the stopped state. */ @@ -953,7 +953,7 @@ static void port_timeout(unsigned long data) "%s: SCIC Port 0x%p failed to stop before tiemout.\n", __func__, sci_port); - } else if (current_state == SCI_BASE_PORT_STATE_STOPPING) { + } else if (current_state == SCI_PORT_STOPPING) { /* if the port is still stopping then the stop has not completed */ isci_port_stop_complete(sci_port->owning_controller, sci_port, @@ -1139,7 +1139,7 @@ scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) static void scic_sds_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); scic_sds_port_suspend_port_task_scheduler(sci_port); @@ -1148,14 +1148,14 @@ static void scic_sds_port_ready_substate_waiting_enter(struct sci_base_state_mac if (sci_port->active_phy_mask != 0) { /* At least one of the phys on the port is ready */ port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); + SCI_PORT_SUB_OPERATIONAL); } } static void scic_sds_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) { u32 index; - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); @@ -1211,12 +1211,12 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci * @object: This is the object which is cast to a struct scic_sds_port object. * * This method will perform the actions required by the struct scic_sds_port on - * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports + * exiting the SCI_PORT_SUB_OPERATIONAL. This function reports * the port not ready and suspends the port task scheduler. none */ static void scic_sds_port_ready_substate_operational_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); @@ -1236,7 +1236,7 @@ static void scic_sds_port_ready_substate_operational_exit(struct sci_base_state_ static void scic_sds_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); @@ -1245,15 +1245,15 @@ static void scic_sds_port_ready_substate_configuring_enter(struct sci_base_state isci_port_not_ready(ihost, iport); port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + SCI_PORT_SUB_WAITING); } else if (sci_port->started_request_count == 0) port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); + SCI_PORT_SUB_OPERATIONAL); } static void scic_sds_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); scic_sds_port_suspend_port_task_scheduler(sci_port); if (sci_port->ready_exit) @@ -1267,8 +1267,8 @@ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) enum scic_sds_port_states state; u32 phy_mask; - state = sci_port->state_machine.current_state_id; - if (state != SCI_BASE_PORT_STATE_STOPPED) { + state = sci_port->sm.current_state_id; + if (state != SCI_PORT_STOPPED) { dev_warn(sciport_to_dev(sci_port), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; @@ -1315,7 +1315,7 @@ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) */ if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { port_state_machine_change(sci_port, - SCI_BASE_PORT_STATE_READY); + SCI_PORT_READY); return SCI_SUCCESS; } @@ -1332,16 +1332,16 @@ enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port) { enum scic_sds_port_states state; - state = sci_port->state_machine.current_state_id; + state = sci_port->sm.current_state_id; switch (state) { - case SCI_BASE_PORT_STATE_STOPPED: + case SCI_PORT_STOPPED: return SCI_SUCCESS; - case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: - case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: - case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: - case SCI_BASE_PORT_STATE_RESETTING: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + case SCI_PORT_SUB_CONFIGURING: + case SCI_PORT_RESETTING: port_state_machine_change(sci_port, - SCI_BASE_PORT_STATE_STOPPING); + SCI_PORT_STOPPING); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(sci_port), @@ -1357,8 +1357,8 @@ static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 enum scic_sds_port_states state; u32 phy_index; - state = sci_port->state_machine.current_state_id; - if (state != SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL) { + state = sci_port->sm.current_state_id; + if (state != SCI_PORT_SUB_OPERATIONAL) { dev_warn(sciport_to_dev(sci_port), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; @@ -1389,7 +1389,7 @@ static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 sci_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; port_state_machine_change(sci_port, - SCI_BASE_PORT_STATE_RESETTING); + SCI_PORT_RESETTING); return SCI_SUCCESS; } @@ -1408,9 +1408,9 @@ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, enum sci_status status; enum scic_sds_port_states state; - state = sci_port->state_machine.current_state_id; + state = sci_port->sm.current_state_id; switch (state) { - case SCI_BASE_PORT_STATE_STOPPED: { + case SCI_PORT_STOPPED: { struct sci_sas_address port_sas_address; /* Read the port assigned SAS Address if there is one */ @@ -1430,8 +1430,8 @@ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, } return scic_sds_port_set_phy(sci_port, sci_phy); } - case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: - case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: status = scic_sds_port_set_phy(sci_port, sci_phy); if (status != SCI_SUCCESS) @@ -1439,10 +1439,10 @@ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; - port_state_machine_change(sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + port_state_machine_change(sci_port, SCI_PORT_SUB_CONFIGURING); return status; - case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + case SCI_PORT_SUB_CONFIGURING: status = scic_sds_port_set_phy(sci_port, sci_phy); if (status != SCI_SUCCESS) @@ -1453,7 +1453,7 @@ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, * the port. */ port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(sci_port), @@ -1477,12 +1477,12 @@ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, enum sci_status status; enum scic_sds_port_states state; - state = sci_port->state_machine.current_state_id; + state = sci_port->sm.current_state_id; switch (state) { - case SCI_BASE_PORT_STATE_STOPPED: + case SCI_PORT_STOPPED: return scic_sds_port_clear_phy(sci_port, sci_phy); - case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + case SCI_PORT_SUB_OPERATIONAL: status = scic_sds_port_clear_phy(sci_port, sci_phy); if (status != SCI_SUCCESS) return status; @@ -1490,9 +1490,9 @@ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, scic_sds_port_deactivate_phy(sci_port, sci_phy, true); sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; - case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + case SCI_PORT_SUB_CONFIGURING: status = scic_sds_port_clear_phy(sci_port, sci_phy); if (status != SCI_SUCCESS) @@ -1503,7 +1503,7 @@ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, * the port */ port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING); + SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(sci_port), @@ -1517,21 +1517,21 @@ enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, { enum scic_sds_port_states state; - state = sci_port->state_machine.current_state_id; + state = sci_port->sm.current_state_id; switch (state) { - case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: + case SCI_PORT_SUB_WAITING: /* Since this is the first phy going link up for the port we * can just enable it and continue */ scic_sds_port_activate_phy(sci_port, sci_phy, true); port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); + SCI_PORT_SUB_OPERATIONAL); return SCI_SUCCESS; - case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + case SCI_PORT_SUB_OPERATIONAL: scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); return SCI_SUCCESS; - case SCI_BASE_PORT_STATE_RESETTING: + case SCI_PORT_RESETTING: /* TODO We should make sure that the phy that has gone * link up is the same one on which we sent the reset. It is * possible that the phy on which we sent the reset is not the @@ -1560,9 +1560,9 @@ enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, { enum scic_sds_port_states state; - state = sci_port->state_machine.current_state_id; + state = sci_port->sm.current_state_id; switch (state) { - case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + case SCI_PORT_SUB_OPERATIONAL: scic_sds_port_deactivate_phy(sci_port, sci_phy, true); /* If there are no active phys left in the port, then @@ -1571,9 +1571,9 @@ enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, */ if (sci_port->active_phy_mask == 0) port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + SCI_PORT_SUB_WAITING); return SCI_SUCCESS; - case SCI_BASE_PORT_STATE_RESETTING: + case SCI_PORT_RESETTING: /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ scic_sds_port_deactivate_phy(sci_port, sci_phy, false); @@ -1591,11 +1591,11 @@ enum sci_status scic_sds_port_start_io(struct scic_sds_port *sci_port, { enum scic_sds_port_states state; - state = sci_port->state_machine.current_state_id; + state = sci_port->sm.current_state_id; switch (state) { - case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: + case SCI_PORT_SUB_WAITING: return SCI_FAILURE_INVALID_STATE; - case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + case SCI_PORT_SUB_OPERATIONAL: sci_port->started_request_count++; return SCI_SUCCESS; default: @@ -1611,31 +1611,31 @@ enum sci_status scic_sds_port_complete_io(struct scic_sds_port *sci_port, { enum scic_sds_port_states state; - state = sci_port->state_machine.current_state_id; + state = sci_port->sm.current_state_id; switch (state) { - case SCI_BASE_PORT_STATE_STOPPED: + case SCI_PORT_STOPPED: dev_warn(sciport_to_dev(sci_port), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; - case SCI_BASE_PORT_STATE_STOPPING: + case SCI_PORT_STOPPING: scic_sds_port_decrement_request_count(sci_port); if (sci_port->started_request_count == 0) port_state_machine_change(sci_port, - SCI_BASE_PORT_STATE_STOPPED); + SCI_PORT_STOPPED); break; - case SCI_BASE_PORT_STATE_READY: - case SCI_BASE_PORT_STATE_RESETTING: - case SCI_BASE_PORT_STATE_FAILED: - case SCIC_SDS_PORT_READY_SUBSTATE_WAITING: - case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL: + case SCI_PORT_READY: + case SCI_PORT_RESETTING: + case SCI_PORT_FAILED: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: scic_sds_port_decrement_request_count(sci_port); break; - case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING: + case SCI_PORT_SUB_CONFIGURING: scic_sds_port_decrement_request_count(sci_port); if (sci_port->started_request_count == 0) { port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL); + SCI_PORT_SUB_OPERATIONAL); } break; } @@ -1707,9 +1707,9 @@ static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) static void scic_sds_port_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); - if (sci_port->state_machine.previous_state_id == SCI_BASE_PORT_STATE_STOPPING) { + if (sci_port->sm.previous_state_id == SCI_PORT_STOPPING) { /* * If we enter this state becasuse of a request to stop * the port then we want to disable the hardwares port @@ -1720,7 +1720,7 @@ static void scic_sds_port_stopped_state_enter(struct sci_base_state_machine *sm) static void scic_sds_port_stopped_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); /* Enable and suspend the port task scheduler */ scic_sds_port_enable_port_task_scheduler(sci_port); @@ -1728,14 +1728,14 @@ static void scic_sds_port_stopped_state_exit(struct sci_base_state_machine *sm) static void scic_sds_port_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_port *iport = sci_port_to_iport(sci_port); u32 prev_state; - prev_state = sci_port->state_machine.previous_state_id; - if (prev_state == SCI_BASE_PORT_STATE_RESETTING) + prev_state = sci_port->sm.previous_state_id; + if (prev_state == SCI_PORT_RESETTING) isci_port_hard_reset_complete(iport, SCI_SUCCESS); else isci_port_not_ready(ihost, iport); @@ -1745,19 +1745,19 @@ static void scic_sds_port_ready_state_enter(struct sci_base_state_machine *sm) /* Start the ready substate machine */ port_state_machine_change(sci_port, - SCIC_SDS_PORT_READY_SUBSTATE_WAITING); + SCI_PORT_SUB_WAITING); } static void scic_sds_port_resetting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); sci_del_timer(&sci_port->timer); } static void scic_sds_port_stopping_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); sci_del_timer(&sci_port->timer); @@ -1766,7 +1766,7 @@ static void scic_sds_port_stopping_state_exit(struct sci_base_state_machine *sm) static void scic_sds_port_failed_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), state_machine); + struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); struct isci_port *iport = sci_port_to_iport(sci_port); isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); @@ -1775,31 +1775,31 @@ static void scic_sds_port_failed_state_enter(struct sci_base_state_machine *sm) /* --------------------------------------------------------------------------- */ static const struct sci_base_state scic_sds_port_state_table[] = { - [SCI_BASE_PORT_STATE_STOPPED] = { + [SCI_PORT_STOPPED] = { .enter_state = scic_sds_port_stopped_state_enter, .exit_state = scic_sds_port_stopped_state_exit }, - [SCI_BASE_PORT_STATE_STOPPING] = { + [SCI_PORT_STOPPING] = { .exit_state = scic_sds_port_stopping_state_exit }, - [SCI_BASE_PORT_STATE_READY] = { + [SCI_PORT_READY] = { .enter_state = scic_sds_port_ready_state_enter, }, - [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = { + [SCI_PORT_SUB_WAITING] = { .enter_state = scic_sds_port_ready_substate_waiting_enter, }, - [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = { + [SCI_PORT_SUB_OPERATIONAL] = { .enter_state = scic_sds_port_ready_substate_operational_enter, .exit_state = scic_sds_port_ready_substate_operational_exit }, - [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = { + [SCI_PORT_SUB_CONFIGURING] = { .enter_state = scic_sds_port_ready_substate_configuring_enter, .exit_state = scic_sds_port_ready_substate_configuring_exit }, - [SCI_BASE_PORT_STATE_RESETTING] = { + [SCI_PORT_RESETTING] = { .exit_state = scic_sds_port_resetting_state_exit }, - [SCI_BASE_PORT_STATE_FAILED] = { + [SCI_PORT_FAILED] = { .enter_state = scic_sds_port_failed_state_enter, } }; @@ -1807,11 +1807,11 @@ static const struct sci_base_state scic_sds_port_state_table[] = { void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, struct scic_sds_controller *scic) { - sci_base_state_machine_construct(&sci_port->state_machine, + sci_base_state_machine_construct(&sci_port->sm, scic_sds_port_state_table, - SCI_BASE_PORT_STATE_STOPPED); + SCI_PORT_STOPPED); - sci_base_state_machine_start(&sci_port->state_machine); + sci_base_state_machine_start(&sci_port->sm); sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; sci_port->physical_port_index = index; diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 9a69128..fee6d80 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -84,7 +84,7 @@ struct scic_sds_port { /** * This field contains the information for the base port state machine. */ - struct sci_base_state_machine state_machine; + struct sci_base_state_machine sm; bool ready_exit; @@ -224,7 +224,7 @@ enum scic_sds_port_states { * In this state no new IO operations are permitted. * This state is entered from the STOPPING state. */ - SCI_BASE_PORT_STATE_STOPPED, + SCI_PORT_STOPPED, /** * This state indicates that the port is in the process of stopping. @@ -232,33 +232,33 @@ enum scic_sds_port_states { * operations are allowed to complete. * This state is entered from the READY state. */ - SCI_BASE_PORT_STATE_STOPPING, + SCI_PORT_STOPPING, /** * This state indicates the port is now ready. Thus, the user is * able to perform IO operations on this port. * This state is entered from the STARTING state. */ - SCI_BASE_PORT_STATE_READY, + SCI_PORT_READY, /** * The substate where the port is started and ready but has no * active phys. */ - SCIC_SDS_PORT_READY_SUBSTATE_WAITING, + SCI_PORT_SUB_WAITING, /** * The substate where the port is started and ready and there is * at least one phy operational. */ - SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL, + SCI_PORT_SUB_OPERATIONAL, /** * The substate where the port is started and there was an * add/remove phy event. This state is only used in Automatic * Port Configuration Mode (APC) */ - SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING, + SCI_PORT_SUB_CONFIGURING, /** * This state indicates the port is in the process of performing a hard @@ -266,14 +266,14 @@ enum scic_sds_port_states { * port. * This state is entered from the READY state. */ - SCI_BASE_PORT_STATE_RESETTING, + SCI_PORT_RESETTING, /** * This state indicates the port has failed a reset request. This state * is entered when a port reset request times out. * This state is entered from the RESETTING state. */ - SCI_BASE_PORT_STATE_FAILED, + SCI_PORT_FAILED, }; diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index 38401f6..fcb8f03 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -661,13 +661,13 @@ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, scic_sds_apc_agent_configure_ports(scic, port_agent, sci_phy, true); } else { /* the phy is already the part of the port */ - u32 port_state = sci_port->state_machine.current_state_id; + u32 port_state = sci_port->sm.current_state_id; /* if the PORT'S state is resetting then the link up is from * port hard reset in this case, we need to tell the port * that link up is recieved */ - BUG_ON(port_state != SCI_BASE_PORT_STATE_RESETTING); + BUG_ON(port_state != SCI_PORT_RESETTING); port_agent->phy_ready_mask |= 1 << phy_index; scic_sds_port_link_up(sci_port, sci_phy); } diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 68b63b0..6c93f20 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -126,8 +126,7 @@ static void rnc_destruct_done(void *_dev) struct scic_sds_remote_device *sci_dev = _dev; BUG_ON(sci_dev->started_request_count != 0); - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); + sci_change_state(&sci_dev->sm, SCI_DEV_STOPPED); } static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds_remote_device *sci_dev) @@ -154,20 +153,20 @@ static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, u32 timeout) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; switch (state) { - case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: - case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: - case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + case SCI_DEV_INITIAL: + case SCI_DEV_FAILED: + case SCI_DEV_FINAL: default: dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: + case SCI_DEV_STOPPED: return SCI_SUCCESS; - case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: + case SCI_DEV_STARTING: /* device not started so there had better be no requests */ BUG_ON(sci_dev->started_request_count != 0); scic_sds_remote_node_context_destruct(&sci_dev->rnc, @@ -175,17 +174,17 @@ enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, /* Transition to the stopping state and wait for the * remote node to complete being posted and invalidated. */ - sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + sci_change_state(sm, SCI_DEV_STOPPING); return SCI_SUCCESS; - case SCI_BASE_REMOTE_DEVICE_STATE_READY: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + sci_change_state(sm, SCI_DEV_STOPPING); if (sci_dev->started_request_count == 0) { scic_sds_remote_node_context_destruct(&sci_dev->rnc, rnc_destruct_done, sci_dev); @@ -193,70 +192,70 @@ enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, } else return scic_sds_remote_device_terminate_requests(sci_dev); break; - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: + case SCI_DEV_STOPPING: /* All requests should have been terminated, but if there is an * attempt to stop a device already in the stopping state, then * try again to terminate. */ return scic_sds_remote_device_terminate_requests(sci_dev); - case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: - sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + case SCI_DEV_RESETTING: + sci_change_state(sm, SCI_DEV_STOPPING); return SCI_SUCCESS; } } enum sci_status scic_remote_device_reset(struct scic_sds_remote_device *sci_dev) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; switch (state) { - case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: - case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: - case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: - case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: - case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: default: dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; - case SCI_BASE_REMOTE_DEVICE_STATE_READY: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: - sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + sci_change_state(sm, SCI_DEV_RESETTING); return SCI_SUCCESS; } } enum sci_status scic_remote_device_reset_complete(struct scic_sds_remote_device *sci_dev) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - if (state != SCI_BASE_REMOTE_DEVICE_STATE_RESETTING) { + if (state != SCI_DEV_RESETTING) { dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_READY); + sci_change_state(sm, SCI_DEV_READY); return SCI_SUCCESS; } enum sci_status scic_sds_remote_device_suspend(struct scic_sds_remote_device *sci_dev, u32 suspend_type) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - if (state != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD) { + if (state != SCI_STP_DEV_CMD) { dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; @@ -269,30 +268,30 @@ enum sci_status scic_sds_remote_device_suspend(struct scic_sds_remote_device *sc enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_device *sci_dev, u32 frame_index) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; enum sci_status status; switch (state) { - case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: - case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_IDLE: + case SCI_SMP_DEV_IDLE: + case SCI_DEV_FINAL: default: dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); /* Return the frame back to the controller */ scic_sds_controller_release_frame(scic, frame_index); return SCI_FAILURE_INVALID_STATE; - case SCI_BASE_REMOTE_DEVICE_STATE_READY: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: - case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: - case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: { + case SCI_DEV_READY: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: { struct scic_sds_request *sci_req; struct ssp_frame_hdr hdr; void *frame_header; @@ -319,7 +318,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi } break; } - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: { + case SCI_STP_DEV_NCQ: { struct dev_to_host_fis *hdr; status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, @@ -333,7 +332,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; /* TODO Check sactive and complete associated IO if any. */ - sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + sci_change_state(sm, SCI_STP_DEV_NCQ_ERROR); } else if (hdr->fis_type == FIS_REGD2H && (hdr->status & ATA_ERR)) { /* @@ -341,16 +340,15 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi * Treat this like an SDB error FIS ready reason. */ sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR); + sci_change_state(&sci_dev->sm, SCI_STP_DEV_NCQ_ERROR); } else status = SCI_FAILURE; scic_sds_controller_release_frame(scic, frame_index); break; } - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCI_STP_DEV_CMD: + case SCI_SMP_DEV_CMD: /* The device does not process any UF received from the hardware while * in this state. All unsolicited frames are forwarded to the io request * object. @@ -365,18 +363,18 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi static bool is_remote_device_ready(struct scic_sds_remote_device *sci_dev) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; switch (state) { - case SCI_BASE_REMOTE_DEVICE_STATE_READY: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: return true; default: return false; @@ -386,7 +384,7 @@ static bool is_remote_device_ready(struct scic_sds_remote_device *sci_dev) enum sci_status scic_sds_remote_device_event_handler(struct scic_sds_remote_device *sci_dev, u32 event_code) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; enum sci_status status; @@ -429,7 +427,7 @@ enum sci_status scic_sds_remote_device_event_handler(struct scic_sds_remote_devi if (status != SCI_SUCCESS) return status; - if (state == SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE) { + if (state == SCI_STP_DEV_IDLE) { /* We pick up suspension events to handle specifically to this * state. We resume the RNC right away. @@ -459,26 +457,26 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_port *sci_port = sci_dev->owning_port; struct isci_request *ireq = sci_req_to_ireq(sci_req); enum sci_status status; switch (state) { - case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: - case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: - case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: - case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: - case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: default: dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; - case SCI_BASE_REMOTE_DEVICE_STATE_READY: + case SCI_DEV_READY: /* attempt to start an io request for this device object. The remote * device object will issue the start request for the io and if * successful it will start the request for the port object then @@ -494,7 +492,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic status = scic_sds_request_start(sci_req); break; - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: { + case SCI_STP_DEV_IDLE: { /* handle the start io operation for a sata device that is in * the command idle state. - Evalute the type of IO request to * be started - If its an NCQ request change to NCQ substate - @@ -519,15 +517,15 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic break; if (task->ata_task.use_ncq) - new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ; + new_state = SCI_STP_DEV_NCQ; else { sci_dev->working_request = sci_req; - new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD; + new_state = SCI_STP_DEV_CMD; } - sci_base_state_machine_change_state(sm, new_state); + sci_change_state(sm, new_state); break; } - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: { + case SCI_STP_DEV_NCQ: { struct sas_task *task = isci_request_access_task(ireq); if (task->ata_task.use_ncq) { @@ -544,9 +542,9 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic return SCI_FAILURE_INVALID_STATE; break; } - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + case SCI_STP_DEV_AWAIT_RESET: return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: + case SCI_SMP_DEV_IDLE: status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); if (status != SCI_SUCCESS) return status; @@ -560,11 +558,10 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic break; sci_dev->working_request = sci_req; - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + sci_change_state(&sci_dev->sm, SCI_SMP_DEV_CMD); break; - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCI_STP_DEV_CMD: + case SCI_SMP_DEV_CMD: /* device is already handling a command it can not accept new commands * until this one is complete. */ @@ -597,31 +594,31 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_port *sci_port = sci_dev->owning_port; enum sci_status status; switch (state) { - case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: - case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: - case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_IDLE: + case SCI_SMP_DEV_IDLE: + case SCI_DEV_FAILED: + case SCI_DEV_FINAL: default: dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; - case SCI_BASE_REMOTE_DEVICE_STATE_READY: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: - case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: + case SCI_DEV_READY: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_DEV_RESETTING: status = common_complete_io(sci_port, sci_dev, sci_req); break; - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: status = common_complete_io(sci_port, sci_dev, sci_req); if (status != SCI_SUCCESS) break; @@ -632,17 +629,17 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s * can reach RNC state handler, these IOs will be completed by RNC with * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ - sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET); + sci_change_state(sm, SCI_STP_DEV_AWAIT_RESET); } else if (scic_sds_remote_device_get_request_count(sci_dev) == 0) - sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + sci_change_state(sm, SCI_STP_DEV_IDLE); break; - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: + case SCI_SMP_DEV_CMD: status = common_complete_io(sci_port, sci_dev, sci_req); if (status != SCI_SUCCESS) break; - sci_base_state_machine_change_state(sm, SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + sci_change_state(sm, SCI_SMP_DEV_IDLE); break; - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: + case SCI_DEV_STOPPING: status = common_complete_io(sci_port, sci_dev, sci_req); if (status != SCI_SUCCESS) break; @@ -676,30 +673,30 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc struct scic_sds_remote_device *sci_dev, struct scic_sds_request *sci_req) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_port *sci_port = sci_dev->owning_port; enum sci_status status; switch (state) { - case SCI_BASE_REMOTE_DEVICE_STATE_INITIAL: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPED: - case SCI_BASE_REMOTE_DEVICE_STATE_STARTING: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCI_BASE_REMOTE_DEVICE_STATE_STOPPING: - case SCI_BASE_REMOTE_DEVICE_STATE_FAILED: - case SCI_BASE_REMOTE_DEVICE_STATE_RESETTING: - case SCI_BASE_REMOTE_DEVICE_STATE_FINAL: + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: default: dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR: - case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); if (status != SCI_SUCCESS) return status; @@ -717,7 +714,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc * management request. */ sci_dev->working_request = sci_req; - sci_base_state_machine_change_state(sm, SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD); + sci_change_state(sm, SCI_STP_DEV_CMD); /* The remote node context must cleanup the TCi to NCQ mapping * table. The only way to do this correctly is to either write @@ -739,7 +736,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc * post TC when RNC gets resumed. */ return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; - case SCI_BASE_REMOTE_DEVICE_STATE_READY: + case SCI_DEV_READY: status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); if (status != SCI_SUCCESS) return status; @@ -790,8 +787,7 @@ static void remote_device_resume_done(void *_dev) return; /* go 'ready' if we are not already in a ready state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY); + sci_change_state(&sci_dev->sm, SCI_DEV_READY); } static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) @@ -803,17 +799,16 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl /* For NCQ operation we do not issue a isci_remote_device_not_ready(). * As a result, avoid sending the ready notification. */ - if (sci_dev->state_machine.previous_state_id != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ) + if (sci_dev->sm.previous_state_id != SCI_STP_DEV_NCQ) isci_remote_device_ready(scic_to_ihost(scic), idev); } static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); /* Initial state is a transitional state to the stopped state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); + sci_change_state(&sci_dev->sm, SCI_DEV_STOPPED); } /** @@ -831,11 +826,11 @@ static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_mac */ static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device *sci_dev) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_controller *scic; - if (state != SCI_BASE_REMOTE_DEVICE_STATE_STOPPED) { + if (state != SCI_DEV_STOPPED) { dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; @@ -845,7 +840,7 @@ static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device scic_sds_controller_free_remote_node_context(scic, sci_dev, sci_dev->rnc.remote_node_index); sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_FINAL); + sci_change_state(sm, SCI_DEV_FINAL); return SCI_SUCCESS; } @@ -906,7 +901,7 @@ static void isci_remote_device_stop_complete(struct isci_host *ihost, static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); u32 prev_state; @@ -914,8 +909,8 @@ static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_mac /* If we are entering from the stopping state let the SCI User know that * the stop operation has completed. */ - prev_state = sci_dev->state_machine.previous_state_id; - if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) + prev_state = sci_dev->sm.previous_state_id; + if (prev_state == SCI_DEV_STOPPING) isci_remote_device_stop_complete(scic_to_ihost(scic), idev); scic_sds_controller_remote_device_stopped(scic, sci_dev); @@ -923,7 +918,7 @@ static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_mac static void scic_sds_remote_device_starting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_host *ihost = scic_to_ihost(scic); struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); @@ -934,7 +929,7 @@ static void scic_sds_remote_device_starting_state_enter(struct sci_base_state_ma static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); struct domain_device *dev = idev->domain_dev; @@ -942,18 +937,16 @@ static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machi scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + sci_change_state(&sci_dev->sm, SCI_STP_DEV_IDLE); } else if (dev_is_expander(dev)) { - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + sci_change_state(&sci_dev->sm, SCI_SMP_DEV_IDLE); } else isci_remote_device_ready(scic_to_ihost(scic), idev); } static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); struct domain_device *dev = sci_dev_to_domain(sci_dev); if (dev->dev_type == SAS_END_DEV) { @@ -967,7 +960,7 @@ static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machin static void scic_sds_remote_device_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); scic_sds_remote_node_context_suspend( &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); @@ -975,14 +968,14 @@ static void scic_sds_remote_device_resetting_state_enter(struct sci_base_state_m static void scic_sds_remote_device_resetting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); } static void scic_sds_stp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); sci_dev->working_request = NULL; if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { @@ -999,7 +992,7 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter(struct sci_base static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); BUG_ON(sci_dev->working_request == NULL); @@ -1010,7 +1003,7 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); @@ -1021,7 +1014,7 @@ static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); isci_remote_device_ready(scic_to_ihost(scic), sci_dev_to_idev(sci_dev)); @@ -1029,7 +1022,7 @@ static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base static void scic_sds_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); BUG_ON(sci_dev->working_request == NULL); @@ -1040,50 +1033,50 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter(struct sci_base_ static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), state_machine); + struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); sci_dev->working_request = NULL; } static const struct sci_base_state scic_sds_remote_device_state_table[] = { - [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { + [SCI_DEV_INITIAL] = { .enter_state = scic_sds_remote_device_initial_state_enter, }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { + [SCI_DEV_STOPPED] = { .enter_state = scic_sds_remote_device_stopped_state_enter, }, - [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { + [SCI_DEV_STARTING] = { .enter_state = scic_sds_remote_device_starting_state_enter, }, - [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { + [SCI_DEV_READY] = { .enter_state = scic_sds_remote_device_ready_state_enter, .exit_state = scic_sds_remote_device_ready_state_exit }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + [SCI_STP_DEV_IDLE] = { .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + [SCI_STP_DEV_CMD] = { .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = { }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = { + [SCI_STP_DEV_NCQ] = { }, + [SCI_STP_DEV_NCQ_ERROR] = { .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, }, - [SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = { }, - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = { + [SCI_STP_DEV_AWAIT_RESET] = { }, + [SCI_SMP_DEV_IDLE] = { .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, }, - [SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = { + [SCI_SMP_DEV_CMD] = { .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { }, - [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { }, - [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { + [SCI_DEV_STOPPING] = { }, + [SCI_DEV_FAILED] = { }, + [SCI_DEV_RESETTING] = { .enter_state = scic_sds_remote_device_resetting_state_enter, .exit_state = scic_sds_remote_device_resetting_state_exit }, - [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { }, + [SCI_DEV_FINAL] = { }, }; /** @@ -1102,11 +1095,11 @@ static void scic_remote_device_construct(struct scic_sds_port *sci_port, sci_dev->owning_port = sci_port; sci_dev->started_request_count = 0; - sci_base_state_machine_construct(&sci_dev->state_machine, + sci_base_state_machine_construct(&sci_dev->sm, scic_sds_remote_device_state_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); + SCI_DEV_INITIAL); - sci_base_state_machine_start(&sci_dev->state_machine); + sci_base_state_machine_start(&sci_dev->sm); scic_sds_remote_node_context_construct(&sci_dev->rnc, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); @@ -1224,11 +1217,11 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *sci_dev, u32 timeout) { - struct sci_base_state_machine *sm = &sci_dev->state_machine; + struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; enum sci_status status; - if (state != SCI_BASE_REMOTE_DEVICE_STATE_STOPPED) { + if (state != SCI_DEV_STOPPED) { dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; @@ -1240,7 +1233,7 @@ static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *s if (status != SCI_SUCCESS) return status; - sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STARTING); + sci_change_state(sm, SCI_DEV_STARTING); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index a118f58..2b6a5bb 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -74,7 +74,7 @@ struct scic_sds_remote_device { * This field contains the information for the base remote device state * machine. */ - struct sci_base_state_machine state_machine; + struct sci_base_state_machine sm; /** * This field is the programmed device port width. This value is @@ -109,7 +109,7 @@ struct scic_sds_remote_device { /** * This field contains the stated request count for the remote device. The - * device can not reach the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED until all + * device can not reach the SCI_DEV_STOPPED until all * requests are complete and the rnc_posted value is false. */ u32 started_request_count; @@ -213,7 +213,7 @@ enum scic_sds_remote_device_states { /** * Simply the initial state for the base remote device state machine. */ - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL, + SCI_DEV_INITIAL, /** * This state indicates that the remote device has successfully been @@ -221,7 +221,7 @@ enum scic_sds_remote_device_states { * This state is entered from the INITIAL state. * This state is entered from the STOPPING state. */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED, + SCI_DEV_STOPPED, /** * This state indicates the the remote device is in the process of @@ -229,34 +229,34 @@ enum scic_sds_remote_device_states { * are permitted. * This state is entered from the STOPPED state. */ - SCI_BASE_REMOTE_DEVICE_STATE_STARTING, + SCI_DEV_STARTING, /** * This state indicates the remote device is now ready. Thus, the user * is able to perform IO operations on the remote device. * This state is entered from the STARTING state. */ - SCI_BASE_REMOTE_DEVICE_STATE_READY, + SCI_DEV_READY, /** * This is the idle substate for the stp remote device. When there are no * active IO for the device it is is in this state. */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, + SCI_STP_DEV_IDLE, /** * This is the command state for for the STP remote device. This state is * entered when the device is processing a non-NCQ command. The device object * will fail any new start IO requests until this command is complete. */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD, + SCI_STP_DEV_CMD, /** * This is the NCQ state for the STP remote device. This state is entered * when the device is processing an NCQ reuqest. It will remain in this state * so long as there is one or more NCQ requests being processed. */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ, + SCI_STP_DEV_NCQ, /** * This is the NCQ error state for the STP remote device. This state is @@ -264,25 +264,25 @@ enum scic_sds_remote_device_states { * NCQ state. The device object will only accept a READ LOG command while in * this state. */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR, + SCI_STP_DEV_NCQ_ERROR, /** * This is the READY substate indicates the device is waiting for the RESET task * coming to be recovered from certain hardware specific error. */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET, + SCI_STP_DEV_AWAIT_RESET, /** * This is the ready operational substate for the remote device. This is the * normal operational state for a remote device. */ - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, + SCI_SMP_DEV_IDLE, /** * This is the suspended state for the remote device. This is the state that * the device is placed in when a RNC suspend is received by the SCU hardware. */ - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD, + SCI_SMP_DEV_CMD, /** * This state indicates that the remote device is in the process of @@ -291,7 +291,7 @@ enum scic_sds_remote_device_states { * This state is entered from the READY state. * This state is entered from the FAILED state. */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, + SCI_DEV_STOPPING, /** * This state indicates that the remote device has failed. @@ -299,19 +299,19 @@ enum scic_sds_remote_device_states { * This state is entered from the INITIALIZING state. * This state is entered from the READY state. */ - SCI_BASE_REMOTE_DEVICE_STATE_FAILED, + SCI_DEV_FAILED, /** * This state indicates the device is being reset. * In this state no new IO operations are permitted. * This state is entered from the READY state. */ - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, + SCI_DEV_RESETTING, /** * Simply the final state for the base remote device state machine. */ - SCI_BASE_REMOTE_DEVICE_STATE_FINAL, + SCI_DEV_FINAL, }; static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index e7fa5ba..24b1d8a 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -84,9 +84,9 @@ bool scic_sds_remote_node_context_is_ready( struct scic_sds_remote_node_context *sci_rnc) { - u32 current_state = sci_base_state_machine_get_state(&sci_rnc->state_machine); + u32 current_state = sci_rnc->sm.current_state_id; - if (current_state == SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { + if (current_state == SCI_RNC_READY) { return true; } @@ -268,12 +268,12 @@ static void scic_sds_remote_node_context_invalidate_context_buffer( static void scic_sds_remote_node_context_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); /* Check to see if we have gotten back to the initial state because * someone requested to destroy the remote node context object. */ - if (sm->previous_state_id == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE) { + if (sm->previous_state_id == SCI_RNC_INVALIDATING) { rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; scic_sds_remote_node_context_notify_user(rnc); } @@ -281,21 +281,21 @@ static void scic_sds_remote_node_context_initial_state_enter(struct sci_base_sta static void scic_sds_remote_node_context_posting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *sci_rnc = container_of(sm, typeof(*sci_rnc), state_machine); + struct scic_sds_remote_node_context *sci_rnc = container_of(sm, typeof(*sci_rnc), sm); scic_sds_remote_node_context_validate_context_buffer(sci_rnc); } static void scic_sds_remote_node_context_invalidating_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); scic_sds_remote_node_context_invalidate_context_buffer(rnc); } static void scic_sds_remote_node_context_resuming_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); struct scic_sds_remote_device *sci_dev; struct domain_device *dev; @@ -318,7 +318,7 @@ static void scic_sds_remote_node_context_resuming_state_enter(struct sci_base_st static void scic_sds_remote_node_context_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; @@ -328,41 +328,41 @@ static void scic_sds_remote_node_context_ready_state_enter(struct sci_base_state static void scic_sds_remote_node_context_tx_suspended_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); scic_sds_remote_node_context_continue_state_transitions(rnc); } static void scic_sds_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), state_machine); + struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); scic_sds_remote_node_context_continue_state_transitions(rnc); } static const struct sci_base_state scic_sds_remote_node_context_state_table[] = { - [SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE] = { + [SCI_RNC_INITIAL] = { .enter_state = scic_sds_remote_node_context_initial_state_enter, }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE] = { + [SCI_RNC_POSTING] = { .enter_state = scic_sds_remote_node_context_posting_state_enter, }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE] = { + [SCI_RNC_INVALIDATING] = { .enter_state = scic_sds_remote_node_context_invalidating_state_enter, }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE] = { + [SCI_RNC_RESUMING] = { .enter_state = scic_sds_remote_node_context_resuming_state_enter, }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE] = { + [SCI_RNC_READY] = { .enter_state = scic_sds_remote_node_context_ready_state_enter, }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE] = { + [SCI_RNC_TX_SUSPENDED] = { .enter_state = scic_sds_remote_node_context_tx_suspended_state_enter, }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE] = { + [SCI_RNC_TX_RX_SUSPENDED] = { .enter_state = scic_sds_remote_node_context_tx_rx_suspended_state_enter, }, - [SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE] = { }, + [SCI_RNC_AWAIT_SUSPENSION] = { }, }; void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, @@ -373,11 +373,11 @@ void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context rnc->remote_node_index = remote_node_index; rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - sci_base_state_machine_construct(&rnc->state_machine, + sci_base_state_machine_construct(&rnc->sm, scic_sds_remote_node_context_state_table, - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE); + SCI_RNC_INITIAL); - sci_base_state_machine_start(&rnc->state_machine); + sci_base_state_machine_start(&rnc->sm); } enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remote_node_context *sci_rnc, @@ -385,26 +385,24 @@ enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remot { enum scis_sds_remote_node_context_states state; - state = sci_rnc->state_machine.current_state_id; + state = sci_rnc->sm.current_state_id; switch (state) { - case SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE: + case SCI_RNC_POSTING: switch (scu_get_event_code(event_code)) { case SCU_EVENT_POST_RNC_COMPLETE: - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_READY); break; default: goto out; } break; - case SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE: + case SCI_RNC_INVALIDATING: if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) - state = SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE; + state = SCI_RNC_INITIAL; else - state = SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE; - sci_base_state_machine_change_state(&sci_rnc->state_machine, - state); + state = SCI_RNC_POSTING; + sci_change_state(&sci_rnc->sm, state); } else { switch (scu_get_event_type(event_code)) { case SCU_EVENT_TYPE_RNC_SUSPEND_TX: @@ -421,10 +419,9 @@ enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remot } } break; - case SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE: + case SCI_RNC_RESUMING: if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) { - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_READY); } else { switch (scu_get_event_type(event_code)) { case SCU_EVENT_TYPE_RNC_SUSPEND_TX: @@ -441,32 +438,28 @@ enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remot } } break; - case SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE: + case SCI_RNC_READY: switch (scu_get_event_type(event_code)) { case SCU_EVENT_TL_RNC_SUSPEND_TX: - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_SUSPENDED); sci_rnc->suspension_code = scu_get_event_specifier(event_code); break; case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_RX_SUSPENDED); sci_rnc->suspension_code = scu_get_event_specifier(event_code); break; default: goto out; } break; - case SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE: + case SCI_RNC_AWAIT_SUSPENSION: switch (scu_get_event_type(event_code)) { case SCU_EVENT_TL_RNC_SUSPEND_TX: - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_SUSPENDED); sci_rnc->suspension_code = scu_get_event_specifier(event_code); break; case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_RX_SUSPENDED); sci_rnc->suspension_code = scu_get_event_specifier(event_code); break; default: @@ -493,22 +486,21 @@ enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_nod { enum scis_sds_remote_node_context_states state; - state = sci_rnc->state_machine.current_state_id; + state = sci_rnc->sm.current_state_id; switch (state) { - case SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE: + case SCI_RNC_INVALIDATING: scic_sds_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); return SCI_SUCCESS; - case SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE: + case SCI_RNC_POSTING: + case SCI_RNC_RESUMING: + case SCI_RNC_READY: + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: + case SCI_RNC_AWAIT_SUSPENSION: scic_sds_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING); return SCI_SUCCESS; - case SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE: + case SCI_RNC_INITIAL: dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: invalid state %d\n", __func__, state); /* We have decided that the destruct request on the remote node context @@ -530,8 +522,8 @@ enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node { enum scis_sds_remote_node_context_states state; - state = sci_rnc->state_machine.current_state_id; - if (state != SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { + state = sci_rnc->sm.current_state_id; + if (state != SCI_RNC_READY) { dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: invalid state %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; @@ -546,8 +538,7 @@ enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); } - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_AWAIT_SUSPENSION); return SCI_SUCCESS; } @@ -557,27 +548,26 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ { enum scis_sds_remote_node_context_states state; - state = sci_rnc->state_machine.current_state_id; + state = sci_rnc->sm.current_state_id; switch (state) { - case SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE: + case SCI_RNC_INITIAL: if (sci_rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_STATE; scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); scic_sds_remote_node_context_construct_buffer(sci_rnc); - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_POSTING); return SCI_SUCCESS; - case SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE: + case SCI_RNC_POSTING: + case SCI_RNC_INVALIDATING: + case SCI_RNC_RESUMING: if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) return SCI_FAILURE_INVALID_STATE; sci_rnc->user_callback = cb_fn; sci_rnc->user_cookie = cb_p; return SCI_SUCCESS; - case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE: { + case SCI_RNC_TX_SUSPENDED: { struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); struct domain_device *dev = sci_dev_to_domain(sci_dev); @@ -585,27 +575,23 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { if (sci_dev->is_direct_attached) { /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); } else { - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING); } } else return SCI_FAILURE; return SCI_SUCCESS; } - case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE: + case SCI_RNC_TX_RX_SUSPENDED: scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); - sci_base_state_machine_change_state(&sci_rnc->state_machine, - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE); + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); return SCI_FAILURE_INVALID_STATE; - case SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE: + case SCI_RNC_AWAIT_SUSPENSION: scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); return SCI_SUCCESS; default: @@ -620,8 +606,8 @@ enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_nod { enum scis_sds_remote_node_context_states state; - state = sci_rnc->state_machine.current_state_id; - if (state != SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE) { + state = sci_rnc->sm.current_state_id; + if (state != SCI_RNC_READY) { dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: invalid state %d\n", __func__, state); return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; @@ -634,14 +620,14 @@ enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_n { enum scis_sds_remote_node_context_states state; - state = sci_rnc->state_machine.current_state_id; + state = sci_rnc->sm.current_state_id; switch (state) { - case SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE: + case SCI_RNC_RESUMING: + case SCI_RNC_READY: + case SCI_RNC_AWAIT_SUSPENSION: return SCI_SUCCESS; - case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE: - case SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE: + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: scic_sds_remote_node_context_resume(sci_rnc, NULL, NULL); return SCI_SUCCESS; default: diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index f53329f..e6c7248 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -92,45 +92,45 @@ enum scis_sds_remote_node_context_states { * This state is the initial state for a remote node context. On a resume * request the remote node context will transition to the posting state. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_INITIAL_STATE, + SCI_RNC_INITIAL, /** * This is a transition state that posts the RNi to the hardware. Once the RNC * is posted the remote node context will be made ready. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_POSTING_STATE, + SCI_RNC_POSTING, /** * This is a transition state that will post an RNC invalidate to the * hardware. Once the invalidate is complete the remote node context will * transition to the posting state. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE, + SCI_RNC_INVALIDATING, /** * This is a transition state that will post an RNC resume to the hardare. * Once the event notification of resume complete is received the remote node * context will transition to the ready state. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE, + SCI_RNC_RESUMING, /** * This is the state that the remote node context must be in to accept io * request operations. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_READY_STATE, + SCI_RNC_READY, /** * This is the state that the remote node context transitions to when it gets * a TX suspend notification from the hardware. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_SUSPENDED_STATE, + SCI_RNC_TX_SUSPENDED, /** * This is the state that the remote node context transitions to when it gets * a TX RX suspend notification from the hardware. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_TX_RX_SUSPENDED_STATE, + SCI_RNC_TX_RX_SUSPENDED, /** * This state is a wait state for the remote node context that waits for a @@ -138,7 +138,7 @@ enum scis_sds_remote_node_context_states { * there is a request to supend the remote node context or when there is a TC * completion where the remote node will be suspended by the hardware. */ - SCIC_SDS_REMOTE_NODE_CONTEXT_AWAIT_SUSPENSION_STATE + SCI_RNC_AWAIT_SUSPENSION }; /** @@ -194,7 +194,7 @@ struct scic_sds_remote_node_context { /** * This field contains the data for the object's state machine. */ - struct sci_base_state_machine state_machine; + struct sci_base_state_machine sm; }; void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 31c9b2c..89f0ab9 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -649,8 +649,7 @@ static enum sci_status scic_io_request_construct_basic_ssp(struct scic_sds_reque scic_sds_io_request_build_ssp_command_iu(sci_req); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); return SCI_SUCCESS; } @@ -664,8 +663,7 @@ enum sci_status scic_task_request_construct_ssp( /* Fill in the SSP Task IU */ scic_sds_task_request_build_ssp_task_iu(sci_req); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); return SCI_SUCCESS; } @@ -687,8 +685,7 @@ static enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_requ copy); if (status == SCI_SUCCESS) - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); return status; } @@ -718,8 +715,7 @@ enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_re if (status != SCI_SUCCESS) return status; - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); return status; } @@ -761,8 +757,8 @@ enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) scic_sds_remote_device_get_sequence(sci_req->target_device)) return SCI_FAILURE; - state = sci_req->state_machine.current_state_id; - if (state != SCI_BASE_REQUEST_STATE_CONSTRUCTED) { + state = sci_req->sm.current_state_id; + if (state != SCI_REQ_CONSTRUCTED) { dev_warn(scic_to_dev(scic), "%s: SCIC IO Request requested to start while in wrong " "state %d\n", __func__, state); @@ -818,8 +814,7 @@ enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) sci_req->post_context |= scic_sds_io_tag_get_index(sci_req->io_tag); /* Everything is good go ahead and change state */ - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_STARTED); + sci_change_state(&sci_req->sm, SCI_REQ_STARTED); return SCI_SUCCESS; } @@ -832,52 +827,47 @@ scic_sds_io_request_terminate(struct scic_sds_request *sci_req) { enum sci_base_request_states state; - state = sci_req->state_machine.current_state_id; + state = sci_req->sm.current_state_id; switch (state) { - case SCI_BASE_REQUEST_STATE_CONSTRUCTED: + case SCI_REQ_CONSTRUCTED: scic_sds_request_set_status(sci_req, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; - case SCI_BASE_REQUEST_STATE_STARTED: - case SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION: - case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE: - case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION: - case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE: - case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE: - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); + case SCI_REQ_STARTED: + case SCI_REQ_TASK_WAIT_TC_COMP: + case SCI_REQ_SMP_WAIT_RESP: + case SCI_REQ_SMP_WAIT_TC_COMP: + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + case SCI_REQ_STP_UDMA_WAIT_D2H: + case SCI_REQ_STP_NON_DATA_WAIT_H2D: + case SCI_REQ_STP_NON_DATA_WAIT_D2H: + case SCI_REQ_STP_PIO_WAIT_H2D: + case SCI_REQ_STP_PIO_WAIT_FRAME: + case SCI_REQ_STP_PIO_DATA_IN: + case SCI_REQ_STP_PIO_DATA_OUT: + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: + case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: + sci_change_state(&sci_req->sm, SCI_REQ_ABORTING); return SCI_SUCCESS; - case SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE: - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_ABORTING); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + case SCI_REQ_TASK_WAIT_TC_RESP: + sci_change_state(&sci_req->sm, SCI_REQ_ABORTING); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; - case SCI_BASE_REQUEST_STATE_ABORTING: - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + case SCI_REQ_ABORTING: + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; - case SCI_BASE_REQUEST_STATE_COMPLETED: + case SCI_REQ_COMPLETED: default: dev_warn(scic_to_dev(sci_req->owning_controller), "%s: SCIC IO Request requested to abort while in wrong " "state %d\n", __func__, - sci_base_state_machine_get_state(&sci_req->state_machine)); + sci_req->sm.current_state_id); break; } @@ -889,8 +879,8 @@ enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req) enum sci_base_request_states state; struct scic_sds_controller *scic = sci_req->owning_controller; - state = sci_req->state_machine.current_state_id; - if (WARN_ONCE(state != SCI_BASE_REQUEST_STATE_COMPLETED, + state = sci_req->sm.current_state_id; + if (WARN_ONCE(state != SCI_REQ_COMPLETED, "isci: request completion from wrong state (%d)\n", state)) return SCI_FAILURE_INVALID_STATE; @@ -902,8 +892,7 @@ enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req) sci_req->saved_rx_frame_index); /* XXX can we just stop the machine and remove the 'final' state? */ - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_FINAL); + sci_change_state(&sci_req->sm, SCI_REQ_FINAL); return SCI_SUCCESS; } @@ -913,9 +902,9 @@ enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_r enum sci_base_request_states state; struct scic_sds_controller *scic = sci_req->owning_controller; - state = sci_req->state_machine.current_state_id; + state = sci_req->sm.current_state_id; - if (state != SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE) { + if (state != SCI_REQ_STP_PIO_DATA_IN) { dev_warn(scic_to_dev(scic), "%s: (%x) in wrong state %d\n", __func__, event_code, state); @@ -927,8 +916,7 @@ enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_r /* We are waiting for data and the SCU has R_ERR the data frame. * Go back to waiting for the D2H Register FIS */ - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); return SCI_SUCCESS; default: dev_err(scic_to_dev(scic), @@ -967,8 +955,9 @@ static void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) memcpy(resp_buf, ssp_response->resp_data, len); } -static enum sci_status request_started_state_tc_event(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +request_started_state_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { struct ssp_response_iu *resp_iu; u8 datapres; @@ -1110,13 +1099,13 @@ static enum sci_status request_started_state_tc_event(struct scic_sds_request *s */ /* In all cases we will treat this as the completion of the IO req. */ - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; } -static enum sci_status request_aborting_state_tc_event(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +request_aborting_state_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): @@ -1124,8 +1113,7 @@ static enum sci_status request_aborting_state_tc_event(struct scic_sds_request * scic_sds_request_set_status(sci_req, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; default: @@ -1146,8 +1134,7 @@ static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request * scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); + sci_change_state(&sci_req->sm, SCI_REQ_TASK_WAIT_TC_RESP); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): /* Currently, the decision is to simply allow the task request @@ -1160,27 +1147,28 @@ static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request * "ACK/NAK timeout\n", __func__, sci_req, completion_code); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE); + sci_change_state(&sci_req->sm, SCI_REQ_TASK_WAIT_TC_RESP); break; default: - /* All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. */ scic_sds_request_set_status(sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; } return SCI_SUCCESS; } -static enum sci_status smp_request_await_response_tc_event(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +smp_request_await_response_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): @@ -1191,8 +1179,7 @@ static enum sci_status smp_request_await_response_tc_event(struct scic_sds_reque scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): @@ -1209,8 +1196,7 @@ static enum sci_status smp_request_await_response_tc_event(struct scic_sds_reque scic_sds_request_set_status(sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; default: @@ -1221,24 +1207,23 @@ static enum sci_status smp_request_await_response_tc_event(struct scic_sds_reque SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; } return SCI_SUCCESS; } -static enum sci_status smp_request_await_tc_event(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +smp_request_await_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; default: /* All other completion status cause the IO to be @@ -1249,8 +1234,7 @@ static enum sci_status smp_request_await_tc_event(struct scic_sds_request *sci_r SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; } @@ -1311,16 +1295,16 @@ static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic return current_sgl; } -static enum sci_status stp_request_non_data_await_h2d_tc_event(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +stp_request_non_data_await_h2d_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H); break; default: @@ -1332,8 +1316,7 @@ static enum sci_status stp_request_non_data_await_h2d_tc_event(struct scic_sds_r SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; } @@ -1509,17 +1492,19 @@ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( return status; } -static enum sci_status stp_request_pio_await_h2d_completion_tc_event(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +stp_request_pio_await_h2d_completion_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { enum sci_status status = SCI_SUCCESS; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_GOOD, + SCI_SUCCESS); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); break; default: @@ -1531,16 +1516,16 @@ static enum sci_status stp_request_pio_await_h2d_completion_tc_event(struct scic SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; } return status; } -static enum sci_status pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { enum sci_status status = SCI_SUCCESS; bool all_frames_transferred = false; @@ -1566,28 +1551,24 @@ static enum sci_status pio_data_out_tx_done_tc_event(struct scic_sds_request *sc /* all data transferred. */ if (all_frames_transferred) { /* - * Change the state to SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_FRAME_SUBSTATE + * Change the state to SCI_REQ_STP_PIO_DATA_IN * and wait for PIO_SETUP fis / or D2H REg fis. */ - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE - ); + sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); } break; + default: /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ scic_sds_request_set_status( sci_req, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - ); + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state( - &sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED - ); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; } @@ -1600,8 +1581,7 @@ static void scic_sds_stp_request_udma_complete_request( enum sci_status sci_status) { scic_sds_request_set_status(request, scu_status, sci_status); - sci_base_state_machine_change_state(&request->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&request->sm, SCI_REQ_COMPLETED); } static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req, @@ -1632,8 +1612,9 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct sc return status; } -enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index) +enum sci_status +scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index) { struct scic_sds_controller *scic = sci_req->owning_controller; struct scic_sds_stp_request *stp_req = &sci_req->stp.req; @@ -1641,9 +1622,9 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r enum sci_status status; ssize_t word_cnt; - state = sci_req->state_machine.current_state_id; + state = sci_req->sm.current_state_id; switch (state) { - case SCI_BASE_REQUEST_STATE_STARTED: { + case SCI_REQ_STARTED: { struct ssp_frame_hdr ssp_hdr; void *frame_header; @@ -1684,20 +1665,21 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r } /* - * In any case we are done with this frame buffer return it to the - * controller + * In any case we are done with this frame buffer return it to + * the controller */ scic_sds_controller_release_frame(scic, frame_index); return SCI_SUCCESS; } - case SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE: + + case SCI_REQ_TASK_WAIT_TC_RESP: scic_sds_io_request_copy_response(sci_req); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); scic_sds_controller_release_frame(scic,frame_index); return SCI_SUCCESS; - case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE: { + + case SCI_REQ_SMP_WAIT_RESP: { struct smp_resp *rsp_hdr = &sci_req->smp.rsp; void *frame_header; @@ -1725,32 +1707,40 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION); + sci_change_state(&sci_req->sm, SCI_REQ_SMP_WAIT_TC_COMP); } else { - /* This was not a response frame why did it get forwarded? */ + /* + * This was not a response frame why did it get + * forwarded? + */ dev_err(scic_to_dev(scic), - "%s: SCIC SMP Request 0x%p received unexpected frame " - "%d type 0x%02x\n", __func__, sci_req, - frame_index, rsp_hdr->frame_type); + "%s: SCIC SMP Request 0x%p received unexpected " + "frame %d type 0x%02x\n", + __func__, + sci_req, + frame_index, + rsp_hdr->frame_type); scic_sds_request_set_status(sci_req, SCU_TASK_DONE_SMP_FRM_TYPE_ERR, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); } scic_sds_controller_release_frame(scic, frame_index); return SCI_SUCCESS; } - case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE: - return scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); - case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE: + + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + return scic_sds_stp_request_udma_general_frame_handler(sci_req, + frame_index); + + case SCI_REQ_STP_UDMA_WAIT_D2H: /* Use the general frame handler to copy the resposne data */ - status = scic_sds_stp_request_udma_general_frame_handler(sci_req, frame_index); + status = scic_sds_stp_request_udma_general_frame_handler(sci_req, + frame_index); if (status != SCI_SUCCESS) return status; @@ -1758,8 +1748,10 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r scic_sds_stp_request_udma_complete_request(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); + return SCI_SUCCESS; - case SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE: { + + case SCI_REQ_STP_NON_DATA_WAIT_D2H: { struct dev_to_host_fis *frame_header; u32 *frame_buffer; @@ -1769,9 +1761,12 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r if (status != SCI_SUCCESS) { dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); return status; } @@ -1802,15 +1797,15 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r break; } - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame(scic, frame_index); return status; } - case SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE: { + + case SCI_REQ_STP_PIO_WAIT_FRAME: { struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); struct dev_to_host_fis *frame_header; @@ -1822,8 +1817,8 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r if (status != SCI_SUCCESS) { dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", __func__, stp_req, frame_index, status); return status; } @@ -1835,9 +1830,10 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r frame_index, (void **)&frame_buffer); - /* Get the data from the PIO Setup The SCU Hardware returns - * first word in the frame_header and the rest of the data is in - * the frame buffer so we need to back up one dword + /* Get the data from the PIO Setup The SCU Hardware + * returns first word in the frame_header and the rest + * of the data is in the frame buffer so we need to + * back up one dword */ /* transfer_count: first 16bits in the 4th dword */ @@ -1856,31 +1852,33 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r * request was PIO Data-in or Data out */ if (task->data_dir == DMA_FROM_DEVICE) { - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_DATA_IN); } else if (task->data_dir == DMA_TO_DEVICE) { /* Transmit data */ status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); if (status != SCI_SUCCESS) break; - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_DATA_OUT); } break; + case FIS_SETDEVBITS: - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); break; + case FIS_REGD2H: if (frame_header->status & ATA_BUSY) { - /* Now why is the drive sending a D2H Register FIS when - * it is still busy? Do nothing since we are still in - * the right state. + /* + * Now why is the drive sending a D2H Register + * FIS when it is still busy? Do nothing since + * we are still in the right state. */ dev_dbg(scic_to_dev(scic), "%s: SCIC PIO Request 0x%p received " "D2H Register FIS with BSY status " - "0x%x\n", __func__, stp_req, + "0x%x\n", + __func__, + stp_req, frame_header->status); break; } @@ -1897,9 +1895,9 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; + default: /* FIXME: what do we do here? */ break; @@ -1910,7 +1908,8 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r return status; } - case SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE: { + + case SCI_REQ_STP_PIO_DATA_IN: { struct dev_to_host_fis *frame_header; struct sata_fis_data *frame_buffer; @@ -1920,9 +1919,12 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r if (status != SCI_SUCCESS) { dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); return status; } @@ -1930,15 +1932,17 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r dev_err(scic_to_dev(scic), "%s: SCIC PIO Request 0x%p received frame %d " "with fis type 0x%02x when expecting a data " - "fis.\n", __func__, stp_req, frame_index, + "fis.\n", + __func__, + stp_req, + frame_index, frame_header->fis_type); scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); /* Frame is decoded return it to the controller */ scic_sds_controller_release_frame(scic, frame_index); @@ -1972,15 +1976,14 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); } else { - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); } return status; } - case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE: { + + case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: { struct dev_to_host_fis *frame_header; u32 *frame_buffer; @@ -1989,9 +1992,12 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r (void **)&frame_header); if (status != SCI_SUCCESS) { dev_err(scic_to_dev(scic), - "%s: SCIC IO Request 0x%p could not get frame header " - "for frame index %d, status %x\n", - __func__, stp_req, frame_index, status); + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); return status; } @@ -2010,35 +2016,43 @@ enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_r SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); break; + default: dev_warn(scic_to_dev(scic), "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", __func__, stp_req, + "violation occurred\n", + __func__, + stp_req, frame_index); - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + scic_sds_request_set_status(sci_req, + SCU_TASK_DONE_UNEXP_FIS, SCI_FAILURE_PROTOCOL_VIOLATION); break; } - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame(scic, frame_index); return status; } - case SCI_BASE_REQUEST_STATE_ABORTING: - /* TODO: Is it even possible to get an unsolicited frame in the + case SCI_REQ_ABORTING: + /* + * TODO: Is it even possible to get an unsolicited frame in the * aborting state? */ scic_sds_controller_release_frame(scic, frame_index); return SCI_SUCCESS; + default: dev_warn(scic_to_dev(scic), - "%s: SCIC IO Request given unexpected frame %x while in " - "state %d\n", __func__, frame_index, state); + "%s: SCIC IO Request given unexpected frame %x while " + "in state %d\n", + __func__, + frame_index, + state); scic_sds_controller_release_frame(scic, frame_index); return SCI_FAILURE_INVALID_STATE; @@ -2075,8 +2089,7 @@ static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request * * the device so we must change state to wait * for it */ - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_UDMA_WAIT_D2H); } break; @@ -2105,45 +2118,45 @@ static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request * return status; } -static enum sci_status stp_request_soft_reset_await_h2d_asserted_tc_event(struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +stp_request_soft_reset_await_h2d_asserted_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG); break; default: /* - * All other completion status cause the IO to be complete. If a NAK - * was received, then it is up to the user to retry the request. */ + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ scic_sds_request_set_status(sci_req, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + SCU_NORMALIZE_COMPLETION_STATUS(completion_code), + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; } return SCI_SUCCESS; } -static enum sci_status stp_request_soft_reset_await_h2d_diagnostic_tc_event( - struct scic_sds_request *sci_req, - u32 completion_code) +static enum sci_status +stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct scic_sds_request *sci_req, + u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE); + sci_change_state(&sci_req->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H); break; default: @@ -2155,8 +2168,7 @@ static enum sci_status stp_request_soft_reset_await_h2d_diagnostic_tc_event( SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_COMPLETED); + sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); break; } @@ -2164,42 +2176,64 @@ static enum sci_status stp_request_soft_reset_await_h2d_diagnostic_tc_event( } enum sci_status -scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, u32 completion_code) +scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, + u32 completion_code) { enum sci_base_request_states state; struct scic_sds_controller *scic = sci_req->owning_controller; - state = sci_req->state_machine.current_state_id; + state = sci_req->sm.current_state_id; switch (state) { - case SCI_BASE_REQUEST_STATE_STARTED: - return request_started_state_tc_event(sci_req, completion_code); - case SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION: - return ssp_task_request_await_tc_event(sci_req, completion_code); - case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE: - return smp_request_await_response_tc_event(sci_req, completion_code); - case SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION: - return smp_request_await_tc_event(sci_req, completion_code); - case SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE: - return stp_request_udma_await_tc_event(sci_req, completion_code); - case SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE: - return stp_request_non_data_await_h2d_tc_event(sci_req, completion_code); - case SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE: - return stp_request_pio_await_h2d_completion_tc_event(sci_req, completion_code); - case SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE: - return pio_data_out_tx_done_tc_event(sci_req, completion_code); - case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE: - return stp_request_soft_reset_await_h2d_asserted_tc_event(sci_req, completion_code); - case SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE: - return stp_request_soft_reset_await_h2d_diagnostic_tc_event(sci_req, completion_code); - case SCI_BASE_REQUEST_STATE_ABORTING: - return request_aborting_state_tc_event(sci_req, completion_code); - default: - dev_warn(scic_to_dev(scic), - "%s: SCIC IO Request given task completion notification %x " - "while in wrong state %d\n", __func__, completion_code, - state); - return SCI_FAILURE_INVALID_STATE; + case SCI_REQ_STARTED: + return request_started_state_tc_event(sci_req, completion_code); + + case SCI_REQ_TASK_WAIT_TC_COMP: + return ssp_task_request_await_tc_event(sci_req, + completion_code); + + case SCI_REQ_SMP_WAIT_RESP: + return smp_request_await_response_tc_event(sci_req, + completion_code); + + case SCI_REQ_SMP_WAIT_TC_COMP: + return smp_request_await_tc_event(sci_req, completion_code); + + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + return stp_request_udma_await_tc_event(sci_req, + completion_code); + + case SCI_REQ_STP_NON_DATA_WAIT_H2D: + return stp_request_non_data_await_h2d_tc_event(sci_req, + completion_code); + + case SCI_REQ_STP_PIO_WAIT_H2D: + return stp_request_pio_await_h2d_completion_tc_event(sci_req, + completion_code); + + case SCI_REQ_STP_PIO_DATA_OUT: + return pio_data_out_tx_done_tc_event(sci_req, completion_code); + + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: + return stp_request_soft_reset_await_h2d_asserted_tc_event(sci_req, + completion_code); + + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: + return stp_request_soft_reset_await_h2d_diagnostic_tc_event(sci_req, + completion_code); + + case SCI_REQ_ABORTING: + return request_aborting_state_tc_event(sci_req, + completion_code); + + default: + dev_warn(scic_to_dev(scic), + "%s: SCIC IO Request given task completion " + "notification %x while in wrong state %d\n", + __func__, + completion_code, + state); + return SCI_FAILURE_INVALID_STATE; } } @@ -2896,7 +2930,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); struct isci_request *ireq = sci_req_to_ireq(sci_req); struct domain_device *dev = sci_dev_to_domain(sci_req->target_device); struct sas_task *task; @@ -2910,34 +2944,31 @@ static void scic_sds_request_started_state_enter(struct sci_base_state_machine * * substates */ if (!task && dev->dev_type == SAS_END_DEV) { - sci_base_state_machine_change_state(sm, - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION); + sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP); } else if (!task && (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high || isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) { - sci_base_state_machine_change_state(sm, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE); + sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED); } else if (task && task->task_proto == SAS_PROTOCOL_SMP) { - sci_base_state_machine_change_state(sm, - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE); + sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP); } else if (task && sas_protocol_ata(task->task_proto) && !task->ata_task.use_ncq) { u32 state; if (task->data_dir == DMA_NONE) - state = SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE; + state = SCI_REQ_STP_NON_DATA_WAIT_H2D; else if (task->ata_task.dma_xfer) - state = SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE; + state = SCI_REQ_STP_UDMA_WAIT_TC_COMP; else /* PIO */ - state = SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE; + state = SCI_REQ_STP_PIO_WAIT_H2D; - sci_base_state_machine_change_state(sm, state); + sci_change_state(sm, state); } } static void scic_sds_request_completed_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); struct scic_sds_controller *scic = sci_req->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); struct isci_request *ireq = sci_req_to_ireq(sci_req); @@ -2952,7 +2983,7 @@ static void scic_sds_request_completed_state_enter(struct sci_base_state_machine static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); /* Setting the abort bit in the Task Context is required by the silicon. */ sci_req->task_context_buffer->abort = 1; @@ -2960,7 +2991,7 @@ static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); scic_sds_remote_device_set_working_request(sci_req->target_device, sci_req); @@ -2968,7 +2999,7 @@ static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(str static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); scic_sds_remote_device_set_working_request(sci_req->target_device, sci_req); @@ -2976,7 +3007,7 @@ static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(struct s static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); scic_sds_remote_device_set_working_request(sci_req->target_device, sci_req); @@ -2984,7 +3015,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completio static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), state_machine); + struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); struct scu_task_context *task_context; struct host_to_dev_fis *h2d_fis; enum sci_status status; @@ -3003,51 +3034,53 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet } static const struct sci_base_state scic_sds_request_state_table[] = { - [SCI_BASE_REQUEST_STATE_INITIAL] = { }, - [SCI_BASE_REQUEST_STATE_CONSTRUCTED] = { }, - [SCI_BASE_REQUEST_STATE_STARTED] = { + [SCI_REQ_INIT] = { }, + [SCI_REQ_CONSTRUCTED] = { }, + [SCI_REQ_STARTED] = { .enter_state = scic_sds_request_started_state_enter, }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE] = { + [SCI_REQ_STP_NON_DATA_WAIT_H2D] = { .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, }, - [SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE] = { + [SCI_REQ_STP_NON_DATA_WAIT_D2H] = { }, + [SCI_REQ_STP_PIO_WAIT_H2D] = { .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE] = { }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE] = { + [SCI_REQ_STP_PIO_WAIT_FRAME] = { }, + [SCI_REQ_STP_PIO_DATA_IN] = { }, + [SCI_REQ_STP_PIO_DATA_OUT] = { }, + [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { }, + [SCI_REQ_STP_UDMA_WAIT_D2H] = { }, + [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED] = { .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE] = { + [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG] = { .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, }, - [SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE] = { }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION] = { }, - [SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE] = { }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE] = { }, - [SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION] = { }, - [SCI_BASE_REQUEST_STATE_COMPLETED] = { + [SCI_REQ_STP_SOFT_RESET_WAIT_D2H] = { }, + [SCI_REQ_TASK_WAIT_TC_COMP] = { }, + [SCI_REQ_TASK_WAIT_TC_RESP] = { }, + [SCI_REQ_SMP_WAIT_RESP] = { }, + [SCI_REQ_SMP_WAIT_TC_COMP] = { }, + [SCI_REQ_COMPLETED] = { .enter_state = scic_sds_request_completed_state_enter, }, - [SCI_BASE_REQUEST_STATE_ABORTING] = { + [SCI_REQ_ABORTING] = { .enter_state = scic_sds_request_aborting_state_enter, }, - [SCI_BASE_REQUEST_STATE_FINAL] = { }, + [SCI_REQ_FINAL] = { }, }; -static void scic_sds_general_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 io_tag, struct scic_sds_request *sci_req) +static void +scic_sds_general_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, + struct scic_sds_request *sci_req) { - sci_base_state_machine_construct(&sci_req->state_machine, + sci_base_state_machine_construct(&sci_req->sm, scic_sds_request_state_table, - SCI_BASE_REQUEST_STATE_INITIAL); - sci_base_state_machine_start(&sci_req->state_machine); + SCI_REQ_INIT); + sci_base_state_machine_start(&sci_req->sm); sci_req->io_tag = io_tag; sci_req->owning_controller = scic; @@ -3322,8 +3355,7 @@ scic_io_request_construct_smp(struct scic_sds_request *sci_req) scu_smp_request_construct_task_context(sci_req, smp_req->req_len); - sci_base_state_machine_change_state(&sci_req->state_machine, - SCI_BASE_REQUEST_STATE_CONSTRUCTED); + sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 31d6d57..757cd99 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -96,37 +96,42 @@ struct scic_sds_stp_request { u32 udma; struct scic_sds_stp_pio_request { - /** - * Total transfer for the entire PIO request recorded at request constuction - * time. + /* + * Total transfer for the entire PIO request recorded + * at request constuction time. * - * @todo Should we just decrement this value for each byte of data transitted - * or received to elemenate the current_transfer_bytes field? + * @todo Should we just decrement this value for each + * byte of data transitted or received to elemenate + * the current_transfer_bytes field? */ u32 total_transfer_bytes; - /** - * Total number of bytes received/transmitted in data frames since the start - * of the IO request. At the end of the IO request this should equal the + /* + * Total number of bytes received/transmitted in data + * frames since the start of the IO request. At the + * end of the IO request this should equal the * total_transfer_bytes. */ u32 current_transfer_bytes; - /** - * The number of bytes requested in the in the PIO setup. + /* + * The number of bytes requested in the in the PIO + * setup. */ u32 pio_transfer_bytes; - /** - * PIO Setup ending status value to tell us if we need to wait for another FIS - * or if the transfer is complete. On the receipt of a D2H FIS this will be + /* + * PIO Setup ending status value to tell us if we need + * to wait for another FIS or if the transfer is + * complete. On the receipt of a D2H FIS this will be * the status field of that FIS. */ u8 ending_status; - /** - * On receipt of a D2H FIS this will be the ending error field if the - * ending_status has the SATA_STATUS_ERR bit set. + /* + * On receipt of a D2H FIS this will be the ending + * error field if the ending_status has the + * SATA_STATUS_ERR bit set. */ u8 ending_error; @@ -138,8 +143,9 @@ struct scic_sds_stp_request { } pio; struct { - /** - * The number of bytes requested in the PIO setup before CDB data frame. + /* + * The number of bytes requested in the PIO setup + * before CDB data frame. */ u32 device_preferred_cdb_length; } packet; @@ -147,57 +153,59 @@ struct scic_sds_stp_request { }; struct scic_sds_request { - /** - * This field contains the information for the base request state machine. + /* + * This field contains the information for the base request state + * machine. */ - struct sci_base_state_machine state_machine; + struct sci_base_state_machine sm; - /** + /* * This field simply points to the controller to which this IO request * is associated. */ struct scic_sds_controller *owning_controller; - /** - * This field simply points to the remote device to which this IO request - * is associated. + /* + * This field simply points to the remote device to which this IO + * request is associated. */ struct scic_sds_remote_device *target_device; - /** + /* * This field is utilized to determine if the SCI user is managing * the IO tag for this request or if the core is managing it. */ bool was_tag_assigned_by_user; - /** + /* * This field indicates the IO tag for this request. The IO tag is * comprised of the task_index and a sequence count. The sequence count * is utilized to help identify tasks from one life to another. */ u16 io_tag; - /** + /* * This field specifies the protocol being utilized for this * IO request. */ enum sci_request_protocol protocol; - /** + /* * This field indicates the completion status taken from the SCUs - * completion code. It indicates the completion result for the SCU hardware. + * completion code. It indicates the completion result for the SCU + * hardware. */ u32 scu_status; - /** - * This field indicates the completion status returned to the SCI user. It - * indicates the users view of the io request completion. + /* + * This field indicates the completion status returned to the SCI user. + * It indicates the users view of the io request completion. */ u32 sci_status; - /** - * This field contains the value to be utilized when posting (e.g. Post_TC, - * Post_TC_Abort) this request to the silicon. + /* + * This field contains the value to be utilized when posting + * (e.g. Post_TC, * Post_TC_Abort) this request to the silicon. */ u32 post_context; @@ -208,26 +216,26 @@ struct scic_sds_request { #define SCU_SGL_SIZE ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2) struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); - /** + /* * This field indicates if this request is a task management request or * normal IO request. */ bool is_task_management_request; - /** - * This field is a pointer to the stored rx frame data. It is used in STP - * internal requests and SMP response frames. If this field is non-NULL the - * saved frame must be released on IO request completion. + /* + * This field is a pointer to the stored rx frame data. It is used in + * STP internal requests and SMP response frames. If this field is + * non-NULL the saved frame must be released on IO request completion. * * @todo In the future do we want to keep a list of RX frame buffers? */ u32 saved_rx_frame_index; - /** - * This field in the recorded device sequence for the io request. This is - * recorded during the build operation and is compared in the start - * operation. If the sequence is different then there was a change of - * devices from the build to start operations. + /* + * This field in the recorded device sequence for the io request. + * This is recorded during the build operation and is compared in the + * start operation. If the sequence is different then there was a + * change of devices from the build to start operations. */ u8 device_sequence; @@ -286,7 +294,7 @@ struct isci_request { dma_addr_t request_daddr; dma_addr_t zero_scatter_daddr; - unsigned int num_sg_entries; /* returned by pci_alloc_sg */ + unsigned int num_sg_entries; /* returned by pci_alloc_sg */ /** Note: "io_request_completion" is completed in two different ways * depending on whether this is a TMF or regular request. @@ -315,104 +323,105 @@ static inline struct isci_request *sci_req_to_ireq(struct scic_sds_request *sci_ * */ enum sci_base_request_states { - /** + /* * Simply the initial state for the base request state machine. */ - SCI_BASE_REQUEST_STATE_INITIAL, + SCI_REQ_INIT, - /** - * This state indicates that the request has been constructed. This state - * is entered from the INITIAL state. + /* + * This state indicates that the request has been constructed. + * This state is entered from the INITIAL state. */ - SCI_BASE_REQUEST_STATE_CONSTRUCTED, + SCI_REQ_CONSTRUCTED, - /** - * This state indicates that the request has been started. This state is - * entered from the CONSTRUCTED state. + /* + * This state indicates that the request has been started. This state + * is entered from the CONSTRUCTED state. */ - SCI_BASE_REQUEST_STATE_STARTED, + SCI_REQ_STARTED, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_TC_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_UDMA_AWAIT_D2H_REG_FIS_SUBSTATE, + SCI_REQ_STP_UDMA_WAIT_TC_COMP, + SCI_REQ_STP_UDMA_WAIT_D2H, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_H2D_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_NON_DATA_AWAIT_D2H_SUBSTATE, + SCI_REQ_STP_NON_DATA_WAIT_H2D, + SCI_REQ_STP_NON_DATA_WAIT_D2H, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_ASSERTED_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_H2D_DIAGNOSTIC_COMPLETION_SUBSTATE, - SCIC_SDS_STP_REQUEST_STARTED_SOFT_RESET_AWAIT_D2H_RESPONSE_FRAME_SUBSTATE, + SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED, + SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG, + SCI_REQ_STP_SOFT_RESET_WAIT_D2H, - /** - * While in this state the IO request object is waiting for the TC completion - * notification for the H2D Register FIS + /* + * While in this state the IO request object is waiting for the TC + * completion notification for the H2D Register FIS */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_H2D_COMPLETION_SUBSTATE, + SCI_REQ_STP_PIO_WAIT_H2D, - /** - * While in this state the IO request object is waiting for either a PIO Setup - * FIS or a D2H register FIS. The type of frame received is based on the - * result of the prior frame and line conditions. + /* + * While in this state the IO request object is waiting for either a + * PIO Setup FIS or a D2H register FIS. The type of frame received is + * based on the result of the prior frame and line conditions. */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_AWAIT_FRAME_SUBSTATE, + SCI_REQ_STP_PIO_WAIT_FRAME, - /** - * While in this state the IO request object is waiting for a DATA frame from - * the device. + /* + * While in this state the IO request object is waiting for a DATA + * frame from the device. */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_IN_AWAIT_DATA_SUBSTATE, + SCI_REQ_STP_PIO_DATA_IN, - /** - * While in this state the IO request object is waiting to transmit the next data - * frame to the device. + /* + * While in this state the IO request object is waiting to transmit + * the next data frame to the device. */ - SCIC_SDS_STP_REQUEST_STARTED_PIO_DATA_OUT_TRANSMIT_DATA_SUBSTATE, + SCI_REQ_STP_PIO_DATA_OUT, - /** + /* * The AWAIT_TC_COMPLETION sub-state indicates that the started raw * task management request is waiting for the transmission of the * initial frame (i.e. command, task, etc.). */ - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION, + SCI_REQ_TASK_WAIT_TC_COMP, - /** + /* * This sub-state indicates that the started task management request * is waiting for the reception of an unsolicited frame * (i.e. response IU). */ - SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_RESPONSE, + SCI_REQ_TASK_WAIT_TC_RESP, - /** + /* * This sub-state indicates that the started task management request * is waiting for the reception of an unsolicited frame * (i.e. response IU). */ - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE, + SCI_REQ_SMP_WAIT_RESP, - /** - * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP request is - * waiting for the transmission of the initial frame (i.e. command, task, etc.). + /* + * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP + * request is waiting for the transmission of the initial frame + * (i.e. command, task, etc.). */ - SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, + SCI_REQ_SMP_WAIT_TC_COMP, - /** + /* * This state indicates that the request has completed. - * This state is entered from the STARTED state. This state is entered from - * the ABORTING state. + * This state is entered from the STARTED state. This state is entered + * from the ABORTING state. */ - SCI_BASE_REQUEST_STATE_COMPLETED, + SCI_REQ_COMPLETED, - /** + /* * This state indicates that the request is in the process of being * terminated/aborted. * This state is entered from the CONSTRUCTED state. * This state is entered from the STARTED state. */ - SCI_BASE_REQUEST_STATE_ABORTING, + SCI_REQ_ABORTING, - /** + /* * Simply the final state for the base request state machine. */ - SCI_BASE_REQUEST_STATE_FINAL, + SCI_REQ_FINAL, }; /** @@ -498,13 +507,18 @@ enum sci_base_request_states { enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *sci_req); -enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, - u32 event_code); -enum sci_status scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, - u32 frame_index); -enum sci_status scic_sds_task_request_terminate(struct scic_sds_request *sci_req); -extern enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req); -extern enum sci_status scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, u32 code); +enum sci_status +scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, + u32 event_code); +enum sci_status +scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, + u32 frame_index); +enum sci_status +scic_sds_task_request_terminate(struct scic_sds_request *sci_req); +extern enum sci_status +scic_sds_request_complete(struct scic_sds_request *sci_req); +extern enum sci_status +scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, u32 code); /* XXX open code in caller */ static inline void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, @@ -523,8 +537,8 @@ static inline void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, } /* XXX open code in caller */ -static inline dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sci_req, - void *virt_addr) +static inline dma_addr_t +scic_io_request_get_dma_addr(struct scic_sds_request *sci_req, void *virt_addr) { struct isci_request *ireq = sci_req_to_ireq(sci_req); @@ -543,9 +557,8 @@ static inline dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *s * * status of the object as a isci_request_status enum. */ -static inline -enum isci_request_status isci_request_get_state( - struct isci_request *isci_request) +static inline enum isci_request_status +isci_request_get_state(struct isci_request *isci_request) { BUG_ON(isci_request == NULL); @@ -566,9 +579,9 @@ enum isci_request_status isci_request_get_state( * @status: This Parameter is the new status of the object * */ -static inline enum isci_request_status isci_request_change_state( - struct isci_request *isci_request, - enum isci_request_status status) +static inline enum isci_request_status +isci_request_change_state(struct isci_request *isci_request, + enum isci_request_status status) { enum isci_request_status old_state; unsigned long flags; @@ -597,10 +610,10 @@ static inline enum isci_request_status isci_request_change_state( * * state previous to any change. */ -static inline enum isci_request_status isci_request_change_started_to_newstate( - struct isci_request *isci_request, - struct completion *completion_ptr, - enum isci_request_status newstate) +static inline enum isci_request_status +isci_request_change_started_to_newstate(struct isci_request *isci_request, + struct completion *completion_ptr, + enum isci_request_status newstate) { enum isci_request_status old_state; unsigned long flags; @@ -615,6 +628,7 @@ static inline enum isci_request_status isci_request_change_started_to_newstate( isci_request->io_request_completion = completion_ptr; isci_request->status = newstate; } + spin_unlock_irqrestore(&isci_request->state_lock, flags); dev_dbg(&isci_request->isci_host->pdev->dev, @@ -635,13 +649,13 @@ static inline enum isci_request_status isci_request_change_started_to_newstate( * * state previous to any change. */ -static inline enum isci_request_status isci_request_change_started_to_aborted( - struct isci_request *isci_request, - struct completion *completion_ptr) +static inline enum isci_request_status +isci_request_change_started_to_aborted(struct isci_request *isci_request, + struct completion *completion_ptr) { - return isci_request_change_started_to_newstate( - isci_request, completion_ptr, aborted - ); + return isci_request_change_started_to_newstate(isci_request, + completion_ptr, + aborted); } /** * isci_request_free() - This function frees the request object. @@ -649,62 +663,33 @@ static inline enum isci_request_status isci_request_change_started_to_aborted( * @isci_request: This parameter points to the isci_request object * */ -static inline void isci_request_free( - struct isci_host *isci_host, - struct isci_request *isci_request) +static inline void isci_request_free(struct isci_host *isci_host, + struct isci_request *isci_request) { if (!isci_request) return; /* release the dma memory if we fail. */ - dma_pool_free(isci_host->dma_pool, isci_request, + dma_pool_free(isci_host->dma_pool, + isci_request, isci_request->request_daddr); } +#define isci_request_access_task(req) ((req)->ttype_ptr.io_task_ptr) -/* #define ISCI_REQUEST_VALIDATE_ACCESS - */ - -#ifdef ISCI_REQUEST_VALIDATE_ACCESS - -static inline -struct sas_task *isci_request_access_task(struct isci_request *isci_request) -{ - BUG_ON(isci_request->ttype != io_task); - return isci_request->ttype_ptr.io_task_ptr; -} - -static inline -struct isci_tmf *isci_request_access_tmf(struct isci_request *isci_request) -{ - BUG_ON(isci_request->ttype != tmf_task); - return isci_request->ttype_ptr.tmf_task_ptr; -} - -#else /* not ISCI_REQUEST_VALIDATE_ACCESS */ - -#define isci_request_access_task(RequestPtr) \ - ((RequestPtr)->ttype_ptr.io_task_ptr) - -#define isci_request_access_tmf(RequestPtr) \ - ((RequestPtr)->ttype_ptr.tmf_task_ptr) - -#endif /* not ISCI_REQUEST_VALIDATE_ACCESS */ - +#define isci_request_access_tmf(req) ((req)->ttype_ptr.tmf_task_ptr) -int isci_request_alloc_tmf( - struct isci_host *isci_host, - struct isci_tmf *isci_tmf, - struct isci_request **isci_request, - struct isci_remote_device *isci_device, - gfp_t gfp_flags); +int isci_request_alloc_tmf(struct isci_host *isci_host, + struct isci_tmf *isci_tmf, + struct isci_request **isci_request, + struct isci_remote_device *isci_device, + gfp_t gfp_flags); -int isci_request_execute( - struct isci_host *isci_host, - struct sas_task *task, - struct isci_request **request, - gfp_t gfp_flags); +int isci_request_execute(struct isci_host *isci_host, + struct sas_task *task, + struct isci_request **request, + gfp_t gfp_flags); /** * isci_request_unmap_sgl() - This function unmaps the DMA address of a given @@ -713,9 +698,8 @@ int isci_request_execute( * @*pdev: This Parameter is the pci_device struct for the controller * */ -static inline void isci_request_unmap_sgl( - struct isci_request *request, - struct pci_dev *pdev) +static inline void +isci_request_unmap_sgl(struct isci_request *request, struct pci_dev *pdev) { struct sas_task *task = isci_request_access_task(request); @@ -758,9 +742,9 @@ static inline void isci_request_unmap_sgl( * * pointer to the next sge for specified request. */ -static inline void *isci_request_io_request_get_next_sge( - struct isci_request *request, - void *current_sge_address) +static inline void * +isci_request_io_request_get_next_sge(struct isci_request *request, + void *current_sge_address) { struct sas_task *task = isci_request_access_task(request); void *ret = NULL; @@ -791,15 +775,20 @@ static inline void *isci_request_io_request_get_next_sge( return ret; } -void isci_terminate_pending_requests(struct isci_host *isci_host, - struct isci_remote_device *isci_device, - enum isci_request_status new_request_state); -enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, - u16 io_tag, - struct scic_sds_request *sci_req); -enum sci_status scic_task_request_construct_ssp(struct scic_sds_request *sci_req); -enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req); -void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); +void +isci_terminate_pending_requests(struct isci_host *isci_host, + struct isci_remote_device *isci_device, + enum isci_request_status new_request_state); +enum sci_status +scic_task_request_construct(struct scic_sds_controller *scic, + struct scic_sds_remote_device *sci_dev, + u16 io_tag, + struct scic_sds_request *sci_req); +enum sci_status +scic_task_request_construct_ssp(struct scic_sds_request *sci_req); +enum sci_status +scic_task_request_construct_sata(struct scic_sds_request *sci_req); +void +scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); #endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/state_machine.c b/drivers/scsi/isci/state_machine.c index 1bcd925..8cfefb9 100644 --- a/drivers/scsi/isci/state_machine.c +++ b/drivers/scsi/isci/state_machine.c @@ -127,16 +127,7 @@ void sci_base_state_machine_stop( sci_state_machine_exit_state(sm); } -/** - * This method performs an update to the current state of the state machine. - * @sm: This parameter specifies the state machine for which - * the caller wishes to perform a state change. - * @next_state: This parameter specifies the new state for the state machine. - * - */ -void sci_base_state_machine_change_state( - struct sci_base_state_machine *sm, - u32 next_state) +void sci_change_state(struct sci_base_state_machine *sm, u32 next_state) { sci_state_machine_exit_state(sm); @@ -145,18 +136,3 @@ void sci_base_state_machine_change_state( sci_state_machine_enter_state(sm); } - -/** - * This method simply returns the current state of the state machine to the - * caller. - * @sm: This parameter specifies the state machine for which to - * retrieve the current state. - * - * This method returns a u32 value indicating the current state for the - * supplied state machine. - */ -u32 sci_base_state_machine_get_state(struct sci_base_state_machine *sm) -{ - return sm->current_state_id; -} - diff --git a/drivers/scsi/isci/state_machine.h b/drivers/scsi/isci/state_machine.h index 067ed91..6cb55a0 100644 --- a/drivers/scsi/isci/state_machine.h +++ b/drivers/scsi/isci/state_machine.h @@ -117,8 +117,6 @@ void sci_base_state_machine_construct(struct sci_base_state_machine *sm, u32 initial_state); void sci_base_state_machine_start(struct sci_base_state_machine *sm); void sci_base_state_machine_stop(struct sci_base_state_machine *sm); -void sci_base_state_machine_change_state(struct sci_base_state_machine *sm, - u32 next_state); -u32 sci_base_state_machine_get_state(struct sci_base_state_machine *sm); +void sci_change_state(struct sci_base_state_machine *sm, u32 next_state); #endif /* _SCI_BASE_STATE_MACHINE_H_ */ -- cgit v0.10.2 From 12ef65444de9d387a383b9991960848bed5bbe74 Mon Sep 17 00:00:00 2001 From: Edmund Nadolski Date: Thu, 2 Jun 2011 00:10:50 +0000 Subject: isci: additional state machine cleanup Additional state machine cleanups: o Remove static functions sci_state_machine_exit_state() and sci_state_machine_enter_state() o Combines sci_base_state_machine_construct() and sci_base_state_machine_start() into a single function, sci_init_sm() o Remove sci_base_state_machine_stop() which is unused. o Kill state_machine.[ch] Signed-off-by: Edmund Nadolski [fixed too large to inline functions] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index ad58fe3..4244970 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -2,7 +2,6 @@ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ remote_device.o port.o \ host.o task.o probe_roms.o \ - state_machine.o \ remote_node_context.o \ remote_node_table.o \ unsolicited_frame_control.o \ diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 81ee64c..f502882 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -197,6 +197,39 @@ */ #define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000) +/* Init the state machine and call the state entry function (if any) */ +void sci_init_sm(struct sci_base_state_machine *sm, + const struct sci_base_state *state_table, u32 initial_state) +{ + sci_state_transition_t handler; + + sm->initial_state_id = initial_state; + sm->previous_state_id = initial_state; + sm->current_state_id = initial_state; + sm->state_table = state_table; + + handler = sm->state_table[initial_state].enter_state; + if (handler) + handler(sm); +} + +/* Call the state exit fn, update the current state, call the state entry fn */ +void sci_change_state(struct sci_base_state_machine *sm, u32 next_state) +{ + sci_state_transition_t handler; + + handler = sm->state_table[sm->current_state_id].exit_state; + if (handler) + handler(sm); + + sm->previous_state_id = sm->current_state_id; + sm->current_state_id = next_state; + + handler = sm->state_table[sm->current_state_id].enter_state; + if (handler) + handler(sm); +} + static bool scic_sds_controller_completion_queue_has_entries( struct scic_sds_controller *scic) { @@ -1807,11 +1840,7 @@ static enum sci_status scic_controller_construct(struct scic_sds_controller *sci struct isci_host *ihost = scic_to_ihost(scic); u8 i; - sci_base_state_machine_construct(&scic->sm, - scic_sds_controller_state_table, - SCIC_INITIAL); - - sci_base_state_machine_start(&scic->sm); + sci_init_sm(&scic->sm, scic_sds_controller_state_table, SCIC_INITIAL); scic->scu_registers = scu_base; scic->smu_registers = smu_base; diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index be09765..4020cf7 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -58,7 +58,7 @@ #include "remote_device.h" #include "phy.h" #include "pool.h" -#include "state_machine.h" +#include "isci.h" #include "remote_node_table.h" #include "registers.h" #include "scu_unsolicited_frame.h" diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 2fe5557..80cfb45 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -57,6 +57,7 @@ #define __ISCI_H__ #include +#include #define DRV_NAME "isci" #define SCI_PCI_BAR_COUNT 2 @@ -584,4 +585,22 @@ static inline void sci_del_timer(struct sci_timer *tmr) del_timer(&tmr->timer); } +struct sci_base_state_machine { + const struct sci_base_state *state_table; + u32 initial_state_id; + u32 current_state_id; + u32 previous_state_id; +}; + +typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm); + +struct sci_base_state { + sci_state_transition_t enter_state; /* Called on state entry */ + sci_state_transition_t exit_state; /* Called on state exit */ +}; + +extern void sci_init_sm(struct sci_base_state_machine *sm, + const struct sci_base_state *state_table, + u32 initial_state); +extern void sci_change_state(struct sci_base_state_machine *sm, u32 next_state); #endif /* __ISCI_H__ */ diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 9de21c7..784c9a7 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -1294,11 +1294,7 @@ static const struct sci_base_state scic_sds_phy_state_table[] = { void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, struct scic_sds_port *owning_port, u8 phy_index) { - sci_base_state_machine_construct(&sci_phy->sm, - scic_sds_phy_state_table, - SCI_PHY_INITIAL); - - sci_base_state_machine_start(&sci_phy->sm); + sci_init_sm(&sci_phy->sm, scic_sds_phy_state_table, SCI_PHY_INITIAL); /* Copy the rest of the input data to our locals */ sci_phy->owning_port = owning_port; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 9d21d27..97ebee1 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -57,7 +57,7 @@ #include #include -#include "state_machine.h" +#include "isci.h" #include "sas.h" /* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 6370b93..74f06f3 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1807,11 +1807,7 @@ static const struct sci_base_state scic_sds_port_state_table[] = { void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, struct scic_sds_controller *scic) { - sci_base_state_machine_construct(&sci_port->sm, - scic_sds_port_state_table, - SCI_PORT_STOPPED); - - sci_base_state_machine_start(&sci_port->sm); + sci_init_sm(&sci_port->sm, scic_sds_port_state_table, SCI_PORT_STOPPED); sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; sci_port->physical_port_index = index; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 6c93f20..3b555dc 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1095,11 +1095,7 @@ static void scic_remote_device_construct(struct scic_sds_port *sci_port, sci_dev->owning_port = sci_port; sci_dev->started_request_count = 0; - sci_base_state_machine_construct(&sci_dev->sm, - scic_sds_remote_device_state_table, - SCI_DEV_INITIAL); - - sci_base_state_machine_start(&sci_dev->sm); + sci_init_sm(&sci_dev->sm, scic_sds_remote_device_state_table, SCI_DEV_INITIAL); scic_sds_remote_node_context_construct(&sci_dev->rnc, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 24b1d8a..9e8967e 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -54,7 +54,7 @@ */ #include "host.h" -#include "state_machine.h" +#include "isci.h" #include "remote_device.h" #include "remote_node_context.h" #include "scu_event_codes.h" @@ -373,11 +373,7 @@ void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context rnc->remote_node_index = remote_node_index; rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - sci_base_state_machine_construct(&rnc->sm, - scic_sds_remote_node_context_state_table, - SCI_RNC_INITIAL); - - sci_base_state_machine_start(&rnc->sm); + sci_init_sm(&rnc->sm, scic_sds_remote_node_context_state_table, SCI_RNC_INITIAL); } enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remote_node_context *sci_rnc, diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index e6c7248..67a45b6 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -64,7 +64,7 @@ * */ -#include "state_machine.h" +#include "isci.h" /** * diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 89f0ab9..8bd1f7d 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -3077,10 +3077,7 @@ scic_sds_general_request_construct(struct scic_sds_controller *scic, u16 io_tag, struct scic_sds_request *sci_req) { - sci_base_state_machine_construct(&sci_req->sm, - scic_sds_request_state_table, - SCI_REQ_INIT); - sci_base_state_machine_start(&sci_req->sm); + sci_init_sm(&sci_req->sm, scic_sds_request_state_table, SCI_REQ_INIT); sci_req->io_tag = io_tag; sci_req->owning_controller = scic; diff --git a/drivers/scsi/isci/state_machine.c b/drivers/scsi/isci/state_machine.c deleted file mode 100644 index 8cfefb9..0000000 --- a/drivers/scsi/isci/state_machine.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains all of the functionality common to all state machine - * object implementations. - * - * - */ - -#include "state_machine.h" - -static void sci_state_machine_exit_state(struct sci_base_state_machine *sm) -{ - u32 state = sm->current_state_id; - sci_state_transition_t exit = sm->state_table[state].exit_state; - - if (exit) - exit(sm); -} - -static void sci_state_machine_enter_state(struct sci_base_state_machine *sm) -{ - u32 state = sm->current_state_id; - sci_state_transition_t enter = sm->state_table[state].enter_state; - - if (enter) - enter(sm); -} - -/** - * This method will set the initial state and state table for the state - * machine. The caller should follow this request with the initialize - * request to cause the state machine to start. - * @sm: This parameter provides the state machine object to be - * constructed. - * @state_table: This parameter specifies the table of state objects that is - * managed by this state machine. - * @initial_state: This parameter specifies the value of the initial state for - * this state machine. - * - */ -void sci_base_state_machine_construct(struct sci_base_state_machine *sm, - const struct sci_base_state *state_table, - u32 initial_state) -{ - sm->initial_state_id = initial_state; - sm->previous_state_id = initial_state; - sm->current_state_id = initial_state; - sm->state_table = state_table; -} - -/** - * This method will cause the state machine to enter the initial state. - * @sm: This parameter specifies the state machine that is to - * be started. - * - * sci_base_state_machine_construct() for how to set the initial state none - */ -void sci_base_state_machine_start(struct sci_base_state_machine *sm) -{ - sm->current_state_id = sm->initial_state_id; - sci_state_machine_enter_state(sm); -} - -/** - * This method will cause the state machine to exit it's current state only. - * @sm: This parameter specifies the state machine that is to - * be stopped. - * - */ -void sci_base_state_machine_stop( - struct sci_base_state_machine *sm) -{ - sci_state_machine_exit_state(sm); -} - -void sci_change_state(struct sci_base_state_machine *sm, u32 next_state) -{ - sci_state_machine_exit_state(sm); - - sm->previous_state_id = sm->current_state_id; - sm->current_state_id = next_state; - - sci_state_machine_enter_state(sm); -} diff --git a/drivers/scsi/isci/state_machine.h b/drivers/scsi/isci/state_machine.h deleted file mode 100644 index 6cb55a0..0000000 --- a/drivers/scsi/isci/state_machine.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCI_BASE_STATE_MACHINE_H_ -#define _SCI_BASE_STATE_MACHINE_H_ - -#include - -struct sci_base_state_machine; -typedef void (*sci_base_state_handler_t)(void); -typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm); - -/** - * struct sci_base_state - The base state object abstracts the fields common to - * all state objects defined in SCI. - * - * - */ -struct sci_base_state { - /** - * This field is a function pointer that defines the method to be - * invoked when the state is entered. - */ - sci_state_transition_t enter_state; - - /** - * This field is a function pointer that defines the method to be - * invoked when the state is exited. - */ - sci_state_transition_t exit_state; -}; - -/** - * struct sci_base_state_machine - This structure defines the fields common to - * all state machines. - * - * - */ -struct sci_base_state_machine { - /** - * This field points to the start of the state machine's state table. - */ - const struct sci_base_state *state_table; - - /** - * This field simply indicates the state value for the state machine's - * initial state. - */ - u32 initial_state_id; - - /** - * This field indicates the current state of the state machine. - */ - u32 current_state_id; - - /** - * This field indicates the previous state of the state machine. - */ - u32 previous_state_id; - -}; - -void sci_base_state_machine_construct(struct sci_base_state_machine *sm, - const struct sci_base_state *state_table, - u32 initial_state); -void sci_base_state_machine_start(struct sci_base_state_machine *sm); -void sci_base_state_machine_stop(struct sci_base_state_machine *sm); -void sci_change_state(struct sci_base_state_machine *sm, u32 next_state); - -#endif /* _SCI_BASE_STATE_MACHINE_H_ */ -- cgit v0.10.2 From dbb0743a58825d94f1b3fdfa90a8d61dfef88f7b Mon Sep 17 00:00:00 2001 From: Adam Gruchala Date: Wed, 1 Jun 2011 22:31:03 +0000 Subject: isci: Added support for C0 to SCU Driver C0 silicon updates the pci revision id and requires new AFE parameters for phy signal integrity. Support for previous silicon revisions is deprecated (it's also broken for the theoretical case of multiple controllers at different silicon revisions, all the more reason to get it removed as soon as possible) Signed-off-by: Adam Gruchala [fixed up deprecated silicon support] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h index 9f9afbd..5f29882 100644 --- a/drivers/scsi/isci/firmware/create_fw.h +++ b/drivers/scsi/isci/firmware/create_fw.h @@ -65,10 +65,10 @@ static const int max_num_concurrent_dev_spin_up = 1; static const int enable_ssc; /* AFE_TX_AMP_CONTROL */ -static const unsigned int afe_tx_amp_control0 = 0x000e7c03; -static const unsigned int afe_tx_amp_control1 = 0x000e7c03; -static const unsigned int afe_tx_amp_control2 = 0x000e7c03; -static const unsigned int afe_tx_amp_control3 = 0x000e7c03; +static const unsigned int afe_tx_amp_control0 = 0x000bdd08; +static const unsigned int afe_tx_amp_control1 = 0x000ffc00; +static const unsigned int afe_tx_amp_control2 = 0x000b7c09; +static const unsigned int afe_tx_amp_control3 = 0x000afc6e; static const char blob_name[] = "isci_firmware.bin"; static const char sig[] = "ISCUOEMB"; diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index f502882..009c0ee 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -2070,13 +2070,13 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); else if (is_a2()) writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); - else if (is_b0()) + else if (is_b0() || is_c0()) writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ - if (is_b0()) + if (is_b0() || is_c0()) writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0); else writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0); @@ -2102,6 +2102,16 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s /* Configure transmitter SSC parameters */ writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); + } else if (is_c0()) { + /* Configure transmitter SSC parameters */ + writel(0x0003000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * All defaults, except the Receive Word Alignament/Comma Detect + * Enable....(0xe800) */ + writel(0x00004500, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); } else { /* * All defaults, except the Receive Word Alignament/Comma Detect @@ -2120,15 +2130,23 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); else if (is_a2()) writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - else { + else if (is_b0()) { /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + } else { + writel(0x000001E7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); /* * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000001E4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); } udelay(AFE_REGISTER_WRITE_DELAY); @@ -2149,12 +2167,22 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); else if (is_a2()) writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - else { + else if (is_b0()) { writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + } else { + writel(0x0140DF0F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x3F6F103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); } + udelay(AFE_REGISTER_WRITE_DELAY); writel(oem_phy->afe_tx_amp_control0, diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 4020cf7..04698dd 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -675,6 +675,7 @@ enum { ISCI_SI_REVA0, ISCI_SI_REVA2, ISCI_SI_REVB0, + ISCI_SI_REVC0 }; extern int isci_si_rev; @@ -691,7 +692,12 @@ static inline bool is_a2(void) static inline bool is_b0(void) { - return isci_si_rev > ISCI_SI_REVA2; + return isci_si_rev == ISCI_SI_REVB0; +} + +static inline bool is_c0(void) +{ + return isci_si_rev > ISCI_SI_REVB0; } void scic_sds_controller_post_request(struct scic_sds_controller *scic, diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index bda7016..bbfb6e5 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -437,27 +437,27 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) static void check_si_rev(struct pci_dev *pdev) { - if (num_controllers(pdev) > 1) + switch (pdev->revision) { + case 0: + case 1: + /* if the id is ambiguous don't update isci_si_rev */ + break; + case 3: + isci_si_rev = ISCI_SI_REVA2; + break; + case 4: isci_si_rev = ISCI_SI_REVB0; - else { - switch (pdev->revision) { - case 0: - case 1: - /* if the id is ambiguous don't update isci_si_rev */ - break; - case 3: - isci_si_rev = ISCI_SI_REVA2; - break; - default: - case 4: - isci_si_rev = ISCI_SI_REVB0; - break; - } + break; + default: + case 5: + isci_si_rev = ISCI_SI_REVC0; + break; } dev_info(&pdev->dev, "driver configured for %s silicon (rev: %d)\n", isci_si_rev == ISCI_SI_REVA0 ? "A0" : - isci_si_rev == ISCI_SI_REVA2 ? "A2" : "B0", pdev->revision); + isci_si_rev == ISCI_SI_REVA2 ? "A2" : + isci_si_rev == ISCI_SI_REVB0 ? "B0" : "C0", pdev->revision); } diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 084fdc6..bc52a61 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -136,6 +136,7 @@ enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params, struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw) { struct isci_orom *orom = NULL, *data; + int i, j; if (request_firmware(&fw, ISCI_FW_NAME, &pdev->dev) != 0) return NULL; @@ -155,6 +156,20 @@ struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmw memcpy(orom, fw->data, fw->size); + /* + * deprecated: override default amp_control for pre-preproduction + * silicon revisions + */ + if (isci_si_rev <= ISCI_SI_REVB0) + goto out; + + for (i = 0; i < ARRAY_SIZE(orom->ctrl); i++) + for (j = 0; j < ARRAY_SIZE(orom->ctrl[i].phys); j++) { + orom->ctrl[i].phys[j].afe_tx_amp_control0 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control1 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control2 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control3 = 0xe7c03; + } out: release_firmware(fw); diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex index 13a9655..2e66195 100644 --- a/firmware/isci/isci_firmware.bin.ihex +++ b/firmware/isci/isci_firmware.bin.ihex @@ -1,16 +1,16 @@ :10000000495343554F454D42E80018100002000087 :1000100000000000000000000101000000000000DE -:10002000FFFFCF5F01000000037C0E00037C0E0089 -:10003000037C0E00037C0E00FFFFCF5F0100000079 -:10004000037C0E00037C0E00037C0E00037C0E007C -:10005000FFFFCF5F01000000037C0E00037C0E0059 -:10006000037C0E00037C0E00FFFFCF5F0100000049 -:10007000037C0E00037C0E00037C0E00037C0E004C +:10002000FFFFCF5F0100000008DD0B0000FC0F00A8 +:10003000097C0B006EFC0A00FFFFCF5F010000008F +:1000400008DD0B0000FC0F00097C0B006EFC0A00B1 +:10005000FFFFCF5F0100000008DD0B0000FC0F0078 +:10006000097C0B006EFC0A00FFFFCF5F010000005F +:1000700008DD0B0000FC0F00097C0B006EFC0A0081 :100080000101000000000000FFFFCF5F0200000040 -:10009000037C0E00037C0E00037C0E00037C0E002C -:1000A000FFFFCF5F02000000037C0E00037C0E0008 -:1000B000037C0E00037C0E00FFFFCF5F02000000F8 -:1000C000037C0E00037C0E00037C0E00037C0E00FC -:1000D000FFFFCF5F02000000037C0E00037C0E00D8 -:0800E000037C0E00037C0E00FE +:1000900008DD0B0000FC0F00097C0B006EFC0A0061 +:1000A000FFFFCF5F0200000008DD0B0000FC0F0027 +:1000B000097C0B006EFC0A00FFFFCF5F020000000E +:1000C00008DD0B0000FC0F00097C0B006EFC0A0031 +:1000D000FFFFCF5F0200000008DD0B0000FC0F00F7 +:0800E000097C0B006EFC0A0014 :00000001FF -- cgit v0.10.2 From 7c78da3175177c905a75c54b5830029c778494ea Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 1 Jun 2011 16:00:01 -0700 Subject: isci: remove 'min memory' infrastructure The old 'core' had aspirations of running in severely memory constrained environments like bios option-rom, it's not needed for Linux and gets in the way of other cleanups (like unifying/reducing the number of structure members in scic_sds_controller/isci_host). This also fixes a theoretical bug in that the driver would blindly override the silicon advertised limits for number of ports, task contexts, and remote node contexts. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 009c0ee..41a7c50 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -70,46 +70,24 @@ #define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 -/** - * smu_dcc_get_max_ports() - - * - * This macro returns the maximum number of logical ports supported by the - * hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_ports(dcc_value) \ +#define smu_max_ports(dcc_value) \ (\ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \ ) -/** - * smu_dcc_get_max_task_context() - - * - * This macro returns the maximum number of task contexts supported by the - * hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_task_context(dcc_value) \ +#define smu_max_task_contexts(dcc_value) \ (\ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \ ) -/** - * smu_dcc_get_max_remote_node_context() - - * - * This macro returns the maximum number of remote node contexts supported by - * the hardware. The caller passes in the value read from the device context - * capacity register and this macro will mash and shift the value appropriately. - */ -#define smu_dcc_get_max_remote_node_context(dcc_value) \ +#define smu_max_rncs(dcc_value) \ (\ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \ ) - #define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 /** @@ -153,9 +131,8 @@ INCREMENT_QUEUE_GET(\ (index), \ (cycle), \ - (controller)->completion_queue_entries, \ - SMU_CQGR_CYCLE_BIT \ - ) + SCU_MAX_COMPLETION_QUEUE_ENTRIES, \ + SMU_CQGR_CYCLE_BIT) /** * INCREMENT_EVENT_QUEUE_GET() - @@ -167,7 +144,7 @@ INCREMENT_QUEUE_GET(\ (index), \ (cycle), \ - (controller)->completion_event_entries, \ + SCU_MAX_EVENTS, \ SMU_CQGR_EVENT_CYCLE_BIT \ ) @@ -843,10 +820,9 @@ static void scic_sds_controller_initialize_completion_queue(struct scic_sds_cont scic->completion_queue_get = 0; - completion_queue_control_value = ( - SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1) - | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1) - ); + completion_queue_control_value = + (SMU_CQC_QUEUE_LIMIT_SET(SCU_MAX_COMPLETION_QUEUE_ENTRIES - 1) | + SMU_CQC_EVENT_LIMIT_SET(SCU_MAX_EVENTS - 1)); writel(completion_queue_control_value, &scic->smu_registers->completion_queue_control); @@ -873,7 +849,7 @@ static void scic_sds_controller_initialize_completion_queue(struct scic_sds_cont &scic->smu_registers->completion_queue_put); /* Initialize the cycle bit of the completion queue entries */ - for (index = 0; index < scic->completion_queue_entries; index++) { + for (index = 0; index < SCU_MAX_COMPLETION_QUEUE_ENTRIES; index++) { /* * If get.cycle_bit != completion_queue.cycle_bit * its not a valid completion queue entry @@ -890,8 +866,7 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_s /* Write the queue size */ frame_queue_control_value = - SCU_UFQC_GEN_VAL(QUEUE_SIZE, - scic->uf_control.address_table.count); + SCU_UFQC_GEN_VAL(QUEUE_SIZE, SCU_MAX_UNSOLICITED_FRAMES); writel(frame_queue_control_value, &scic->scu_registers->sdma.unsolicited_frame_queue_control); @@ -1863,15 +1838,6 @@ static enum sci_status scic_controller_construct(struct scic_sds_controller *sci sci_init_timer(&scic->timer, controller_timeout); - /* Set the default maximum values */ - scic->completion_event_entries = SCU_EVENT_COUNT; - scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT; - scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; - scic->logical_port_entries = SCI_MAX_PORTS; - scic->task_context_entries = SCU_IO_REQUEST_COUNT; - scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT; - scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT; - /* Initialize the User and OEM parameters to default values. */ scic_sds_controller_set_default_config_parameters(scic); @@ -2207,44 +2173,6 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s udelay(AFE_REGISTER_WRITE_DELAY); } -static enum sci_status scic_controller_set_mode(struct scic_sds_controller *scic, - enum sci_controller_mode operating_mode) -{ - enum sci_status status = SCI_SUCCESS; - - if ((scic->sm.current_state_id == SCIC_INITIALIZING) || - (scic->sm.current_state_id == SCIC_INITIALIZED)) { - switch (operating_mode) { - case SCI_MODE_SPEED: - scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES; - scic->task_context_entries = SCU_IO_REQUEST_COUNT; - scic->uf_control.buffers.count = - SCU_UNSOLICITED_FRAME_COUNT; - scic->completion_event_entries = SCU_EVENT_COUNT; - scic->completion_queue_entries = - SCU_COMPLETION_QUEUE_COUNT; - break; - - case SCI_MODE_SIZE: - scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES; - scic->task_context_entries = SCI_MIN_IO_REQUESTS; - scic->uf_control.buffers.count = - SCU_MIN_UNSOLICITED_FRAMES; - scic->completion_event_entries = SCU_MIN_EVENTS; - scic->completion_queue_entries = - SCU_MIN_COMPLETION_QUEUE_ENTRIES; - break; - - default: - status = SCI_FAILURE_INVALID_PARAMETER_VALUE; - break; - } - } else - status = SCI_FAILURE_INVALID_STATE; - - return status; -} - static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) { sci_init_timer(&scic->power_control.timer, power_control_timeout); @@ -2259,9 +2187,9 @@ static void scic_sds_controller_initialize_power_control(struct scic_sds_control static enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) { struct sci_base_state_machine *sm = &scic->sm; - enum sci_status result = SCI_SUCCESS; struct isci_host *ihost = scic_to_ihost(scic); - u32 index, state; + enum sci_status result = SCI_FAILURE; + unsigned long i, state, val; if (scic->sm.current_state_id != SCIC_RESET) { dev_warn(scic_to_dev(scic), @@ -2286,133 +2214,81 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc * / presently they seem to be wrong. */ scic_sds_controller_afe_initialization(scic); - if (result == SCI_SUCCESS) { - u32 status; - u32 terminate_loop; - - /* Take the hardware out of reset */ - writel(0, &scic->smu_registers->soft_reset_control); - /* - * / @todo Provide meaningfull error code for hardware failure - * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ - result = SCI_FAILURE; - terminate_loop = 100; - - while (terminate_loop-- && (result != SCI_SUCCESS)) { - /* Loop until the hardware reports success */ - udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); - status = readl(&scic->smu_registers->control_status); - - if ((status & SCU_RAM_INIT_COMPLETED) == - SCU_RAM_INIT_COMPLETED) - result = SCI_SUCCESS; - } - } - - if (result == SCI_SUCCESS) { - u32 max_supported_ports; - u32 max_supported_devices; - u32 max_supported_io_requests; - u32 device_context_capacity; + /* Take the hardware out of reset */ + writel(0, &scic->smu_registers->soft_reset_control); - /* - * Determine what are the actaul device capacities that the - * hardware will support */ - device_context_capacity = - readl(&scic->smu_registers->device_context_capacity); - - - max_supported_ports = smu_dcc_get_max_ports(device_context_capacity); - max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity); - max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity); + /* + * / @todo Provide meaningfull error code for hardware failure + * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ + for (i = 100; i >= 1; i--) { + u32 status; - /* - * Make all PEs that are unassigned match up with the - * logical ports - */ - for (index = 0; index < max_supported_ports; index++) { - struct scu_port_task_scheduler_group_registers __iomem - *ptsg = &scic->scu_registers->peg0.ptsg; + /* Loop until the hardware reports success */ + udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); + status = readl(&scic->smu_registers->control_status); - writel(index, &ptsg->protocol_engine[index]); - } + if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) + break; + } + if (i == 0) + goto out; - /* Record the smaller of the two capacity values */ - scic->logical_port_entries = - min(max_supported_ports, scic->logical_port_entries); + /* + * Determine what are the actaul device capacities that the + * hardware will support */ + val = readl(&scic->smu_registers->device_context_capacity); - scic->task_context_entries = - min(max_supported_io_requests, - scic->task_context_entries); + /* Record the smaller of the two capacity values */ + scic->logical_port_entries = min(smu_max_ports(val), SCI_MAX_PORTS); + scic->task_context_entries = min(smu_max_task_contexts(val), SCI_MAX_IO_REQUESTS); + scic->remote_node_entries = min(smu_max_rncs(val), SCI_MAX_REMOTE_DEVICES); - scic->remote_node_entries = - min(max_supported_devices, scic->remote_node_entries); + /* + * Make all PEs that are unassigned match up with the + * logical ports + */ + for (i = 0; i < scic->logical_port_entries; i++) { + struct scu_port_task_scheduler_group_registers __iomem + *ptsg = &scic->scu_registers->peg0.ptsg; - /* - * Now that we have the correct hardware reported minimum values - * build the MDL for the controller. Default to a performance - * configuration. - */ - scic_controller_set_mode(scic, SCI_MODE_SPEED); + writel(i, &ptsg->protocol_engine[i]); } /* Initialize hardware PCI Relaxed ordering in DMA engines */ - if (result == SCI_SUCCESS) { - u32 dma_configuration; - - /* Configure the payload DMA */ - dma_configuration = - readl(&scic->scu_registers->sdma.pdma_configuration); - dma_configuration |= - SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - writel(dma_configuration, - &scic->scu_registers->sdma.pdma_configuration); - - /* Configure the control DMA */ - dma_configuration = - readl(&scic->scu_registers->sdma.cdma_configuration); - dma_configuration |= - SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - writel(dma_configuration, - &scic->scu_registers->sdma.cdma_configuration); - } + val = readl(&scic->scu_registers->sdma.pdma_configuration); + val |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(val, &scic->scu_registers->sdma.pdma_configuration); + + val = readl(&scic->scu_registers->sdma.cdma_configuration); + val |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(val, &scic->scu_registers->sdma.cdma_configuration); /* * Initialize the PHYs before the PORTs because the PHY registers * are accessed during the port initialization. */ - if (result == SCI_SUCCESS) { - /* Initialize the phys */ - for (index = 0; - (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS); - index++) { - result = scic_sds_phy_initialize( - &ihost->phys[index].sci, - &scic->scu_registers->peg0.pe[index].tl, - &scic->scu_registers->peg0.pe[index].ll); - } + for (i = 0; i < SCI_MAX_PHYS; i++) { + result = scic_sds_phy_initialize(&ihost->phys[i].sci, + &scic->scu_registers->peg0.pe[i].tl, + &scic->scu_registers->peg0.pe[i].ll); + if (result != SCI_SUCCESS) + goto out; } - if (result == SCI_SUCCESS) { - /* Initialize the logical ports */ - for (index = 0; - (index < scic->logical_port_entries) && - (result == SCI_SUCCESS); - index++) { - result = scic_sds_port_initialize( - &ihost->ports[index].sci, - &scic->scu_registers->peg0.ptsg.port[index], - &scic->scu_registers->peg0.ptsg.protocol_engine, - &scic->scu_registers->peg0.viit[index]); - } + for (i = 0; i < scic->logical_port_entries; i++) { + result = scic_sds_port_initialize(&ihost->ports[i].sci, + &scic->scu_registers->peg0.ptsg.port[i], + &scic->scu_registers->peg0.ptsg.protocol_engine, + &scic->scu_registers->peg0.viit[i]); + + if (result != SCI_SUCCESS) + goto out; } - if (result == SCI_SUCCESS) - result = scic_sds_port_configuration_agent_initialize( - scic, - &scic->port_agent); + result = scic_sds_port_configuration_agent_initialize(scic, &scic->port_agent); + out: /* Advance the controller state machine */ if (result == SCI_SUCCESS) state = SCIC_INITIALIZED; @@ -2480,47 +2356,38 @@ static enum sci_status scic_user_parameters_set( static int scic_controller_mem_init(struct scic_sds_controller *scic) { struct device *dev = scic_to_dev(scic); - dma_addr_t dma_handle; - enum sci_status result; + dma_addr_t dma; + size_t size; + int err; - scic->completion_queue = dmam_alloc_coherent(dev, - scic->completion_queue_entries * sizeof(u32), - &dma_handle, GFP_KERNEL); + size = SCU_MAX_COMPLETION_QUEUE_ENTRIES * sizeof(u32); + scic->completion_queue = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); if (!scic->completion_queue) return -ENOMEM; - writel(lower_32_bits(dma_handle), - &scic->smu_registers->completion_queue_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->completion_queue_upper); + writel(lower_32_bits(dma), &scic->smu_registers->completion_queue_lower); + writel(upper_32_bits(dma), &scic->smu_registers->completion_queue_upper); - scic->remote_node_context_table = dmam_alloc_coherent(dev, - scic->remote_node_entries * - sizeof(union scu_remote_node_context), - &dma_handle, GFP_KERNEL); + size = scic->remote_node_entries * sizeof(union scu_remote_node_context); + scic->remote_node_context_table = dmam_alloc_coherent(dev, size, &dma, + GFP_KERNEL); if (!scic->remote_node_context_table) return -ENOMEM; - writel(lower_32_bits(dma_handle), - &scic->smu_registers->remote_node_context_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->remote_node_context_upper); + writel(lower_32_bits(dma), &scic->smu_registers->remote_node_context_lower); + writel(upper_32_bits(dma), &scic->smu_registers->remote_node_context_upper); - scic->task_context_table = dmam_alloc_coherent(dev, - scic->task_context_entries * - sizeof(struct scu_task_context), - &dma_handle, GFP_KERNEL); + size = scic->task_context_entries * sizeof(struct scu_task_context), + scic->task_context_table = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); if (!scic->task_context_table) return -ENOMEM; - writel(lower_32_bits(dma_handle), - &scic->smu_registers->host_task_table_lower); - writel(upper_32_bits(dma_handle), - &scic->smu_registers->host_task_table_upper); + writel(lower_32_bits(dma), &scic->smu_registers->host_task_table_lower); + writel(upper_32_bits(dma), &scic->smu_registers->host_task_table_upper); - result = scic_sds_unsolicited_frame_control_construct(scic); - if (result) - return result; + err = scic_sds_unsolicited_frame_control_construct(scic); + if (err) + return err; /* * Inform the silicon as to the location of the UF headers and diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 04698dd..74035004 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -240,18 +240,6 @@ struct scic_sds_controller { u32 logical_port_entries; /** - * This field is the minimum number of hardware supported completion queue - * entries and the software requested completion queue entries. - */ - u32 completion_queue_entries; - - /** - * This field is the minimum number of hardware supported event entries and - * the software requested event entries. - */ - u32 completion_event_entries; - - /** * This field is the minimum number of devices supported by the hardware and * the number of devices requested by the software. */ @@ -325,7 +313,6 @@ struct isci_host { union scic_oem_parameters oem_parameters; int id; /* unique within a given pci device */ - void *core_ctrl_memory; struct dma_pool *dma_pool; struct isci_phy phys[SCI_MAX_PHYS]; struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 80cfb45..714ed92 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -78,39 +78,16 @@ enum sci_controller_mode { SCI_MODE_SIZE /* deprecated */ }; -#define SCI_MAX_PHYS (4) +#define SCI_MAX_PHYS (4UL) #define SCI_MAX_PORTS SCI_MAX_PHYS -#define SCI_MIN_SMP_PHYS (38) #define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ -#define SCI_MAX_REMOTE_DEVICES (256) -#define SCI_MIN_REMOTE_DEVICES (16) -#define SCI_MAX_IO_REQUESTS (256) -#define SCI_MIN_IO_REQUESTS (1) +#define SCI_MAX_REMOTE_DEVICES (256UL) +#define SCI_MAX_IO_REQUESTS (256UL) #define SCI_MAX_MSIX_MESSAGES (2) #define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */ -#define SCI_MIN_SCATTER_GATHER_ELEMENTS 1 #define SCI_MAX_CONTROLLERS 2 #define SCI_MAX_DOMAINS SCI_MAX_PORTS -/* 2 indicates the maximum number of UFs that can occur for a given IO request. - * The hardware handles reception of additional unsolicited frames while all - * UFs are in use, by holding off the transmitting device. This number could - * be theoretically reduced to 1, but 2 provides for more reliable operation. - * During SATA PIO operation, it is possible under some conditions for there to - * be 3 separate FISes received, back to back to back (PIO Setup, Data, D2H - * Register). It is unlikely to have all 3 pending all at once without some of - * them already being processed. - */ -#define SCU_MIN_UNSOLICITED_FRAMES (1) -#define SCU_MIN_CRITICAL_NOTIFICATIONS (24) -#define SCU_MIN_EVENTS (4) -#define SCU_MIN_COMPLETION_QUEUE_SCRATCH (2) -#define SCU_MIN_COMPLETION_QUEUE_ENTRIES (SCU_MIN_CRITICAL_NOTIFICATIONS \ - + SCU_MIN_EVENTS \ - + SCU_MIN_UNSOLICITED_FRAMES \ - + SCI_MIN_IO_REQUESTS \ - + SCU_MIN_COMPLETION_QUEUE_SCRATCH) - #define SCU_MAX_CRITICAL_NOTIFICATIONS (384) #define SCU_MAX_EVENTS (128) #define SCU_MAX_UNSOLICITED_FRAMES (128) @@ -121,51 +98,6 @@ enum sci_controller_mode { + SCI_MAX_IO_REQUESTS \ + SCU_MAX_COMPLETION_QUEUE_SCRATCH) -#if !defined(ENABLE_MINIMUM_MEMORY_MODE) -#define SCU_UNSOLICITED_FRAME_COUNT SCU_MAX_UNSOLICITED_FRAMES -#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MAX_CRITICAL_NOTIFICATIONS -#define SCU_EVENT_COUNT SCU_MAX_EVENTS -#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MAX_COMPLETION_QUEUE_SCRATCH -#define SCU_IO_REQUEST_COUNT SCI_MAX_IO_REQUESTS -#define SCU_IO_REQUEST_SGE_COUNT SCI_MAX_SCATTER_GATHER_ELEMENTS -#define SCU_COMPLETION_QUEUE_COUNT SCU_MAX_COMPLETION_QUEUE_ENTRIES -#else -#define SCU_UNSOLICITED_FRAME_COUNT SCU_MIN_UNSOLICITED_FRAMES -#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MIN_CRITICAL_NOTIFICATIONS -#define SCU_EVENT_COUNT SCU_MIN_EVENTS -#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MIN_COMPLETION_QUEUE_SCRATCH -#define SCU_IO_REQUEST_COUNT SCI_MIN_IO_REQUESTS -#define SCU_IO_REQUEST_SGE_COUNT SCI_MIN_SCATTER_GATHER_ELEMENTS -#define SCU_COMPLETION_QUEUE_COUNT SCU_MIN_COMPLETION_QUEUE_ENTRIES -#endif /* !defined(ENABLE_MINIMUM_MEMORY_OPERATION) */ - -/** - * - * - * The SCU_COMPLETION_QUEUE_COUNT constant indicates the size of the completion - * queue into which the hardware DMAs 32-bit quantas (completion entries). - */ - -/** - * - * - * This queue must be programmed to a power of 2 size (e.g. 32, 64, 1024, etc.). - */ -#if (SCU_COMPLETION_QUEUE_COUNT != 16) && \ - (SCU_COMPLETION_QUEUE_COUNT != 32) && \ - (SCU_COMPLETION_QUEUE_COUNT != 64) && \ - (SCU_COMPLETION_QUEUE_COUNT != 128) && \ - (SCU_COMPLETION_QUEUE_COUNT != 256) && \ - (SCU_COMPLETION_QUEUE_COUNT != 512) && \ - (SCU_COMPLETION_QUEUE_COUNT != 1024) -#error "SCU_COMPLETION_QUEUE_COUNT must be set to a power of 2." -#endif - -#if SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES -#error "Invalid configuration of unsolicited frame constants" -#endif /* SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES */ - -#define SCU_MIN_UF_TABLE_ENTRIES (8) #define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) #define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024) #define SCU_INVALID_FRAME_INDEX (0xFFFF) @@ -173,14 +105,14 @@ enum sci_controller_mode { #define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) #define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) -/* - * Determine the size of the unsolicited frame array including - * unused buffers. */ -#if SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES -#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MIN_UF_TABLE_ENTRIES -#else -#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MAX_UNSOLICITED_FRAMES -#endif /* SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES */ +static inline void check_sizes(void) +{ + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_EVENTS); + BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES <= 8); + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES); + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES); + BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES); +} /** * enum sci_status - This is the general return status enumeration for non-IO, diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 757cd99..547c35c 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -213,7 +213,7 @@ struct scic_sds_request { struct scu_task_context tc ____cacheline_aligned; /* could be larger with sg chaining */ - #define SCU_SGL_SIZE ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2) + #define SCU_SGL_SIZE ((SCI_MAX_SCATTER_GATHER_ELEMENTS + 1) / 2) struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); /* diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c index 12e6763..d895707 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.c +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -57,120 +57,30 @@ #include "unsolicited_frame_control.h" #include "registers.h" -/** - * This method will program the unsolicited frames (UFs) into the UF address - * table and construct the UF frame structure being modeled in the core. It - * will handle the case where some of the UFs are not being used and thus - * should have entries programmed to zero in the address table. - * @uf_control: This parameter specifies the unsolicted frame control object - * for which to construct the unsolicited frames objects. - * @uf_buffer_phys_address: This parameter specifies the physical address for - * the first unsolicited frame buffer. - * @uf_buffer_virt_address: This parameter specifies the virtual address for - * the first unsolicited frame buffer. - * @unused_uf_header_entries: This parameter specifies the number of unused UF - * headers. This value can be non-zero when there are a non-power of 2 - * number of unsolicited frames being supported. - * @used_uf_header_entries: This parameter specifies the number of actually - * utilized UF headers. - * - */ -static void scic_sds_unsolicited_frame_control_construct_frames( - struct scic_sds_unsolicited_frame_control *uf_control, - dma_addr_t uf_buffer_phys_address, - void *uf_buffer_virt_address, - u32 unused_uf_header_entries, - u32 used_uf_header_entries) -{ - u32 index; - struct scic_sds_unsolicited_frame *uf; - - /* - * Program the unused buffers into the UF address table and the - * controller's array of UFs. - */ - for (index = 0; index < unused_uf_header_entries; index++) { - uf = &uf_control->buffers.array[index]; - - uf->buffer = NULL; - uf_control->address_table.array[index] = 0; - uf->header = &uf_control->headers.array[index]; - uf->state = UNSOLICITED_FRAME_EMPTY; - } - - /* - * Program the actual used UF buffers into the UF address table and - * the controller's array of UFs. - */ - for (index = unused_uf_header_entries; - index < unused_uf_header_entries + used_uf_header_entries; - index++) { - uf = &uf_control->buffers.array[index]; - - uf_control->address_table.array[index] = uf_buffer_phys_address; - - uf->buffer = uf_buffer_virt_address; - uf->header = &uf_control->headers.array[index]; - uf->state = UNSOLICITED_FRAME_EMPTY; - - /* - * Increment the address of the physical and virtual memory - * pointers. Everything is aligned on 1k boundary with an - * increment of 1k. - */ - uf_buffer_virt_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; - uf_buffer_phys_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; - } -} - int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic) { struct scic_sds_unsolicited_frame_control *uf_control = &scic->uf_control; - u32 unused_uf_header_entries; - u32 used_uf_header_entries; - u32 used_uf_buffer_bytes; - u32 unused_uf_header_bytes; - u32 used_uf_header_bytes; - dma_addr_t uf_buffer_phys_address; - void *uf_buffer_virt_address; + struct scic_sds_unsolicited_frame *uf; + u32 buf_len, header_len, i; + dma_addr_t dma; size_t size; - - /* - * The UF buffer address table size must be programmed to a power - * of 2. Find the first power of 2 that is equal to or greater then - * the number of unsolicited frame buffers to be utilized. - */ - uf_control->address_table.count = SCU_MIN_UF_TABLE_ENTRIES; - while (uf_control->address_table.count < uf_control->buffers.count && - uf_control->address_table.count < SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES) - uf_control->address_table.count <<= 1; + void *virt; /* * Prepare all of the memory sizes for the UF headers, UF address * table, and UF buffers themselves. */ - used_uf_buffer_bytes = uf_control->buffers.count - * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; - unused_uf_header_entries = uf_control->address_table.count - - uf_control->buffers.count; - used_uf_header_entries = uf_control->buffers.count; - unused_uf_header_bytes = unused_uf_header_entries - * sizeof(struct scu_unsolicited_frame_header); - used_uf_header_bytes = used_uf_header_entries - * sizeof(struct scu_unsolicited_frame_header); - - size = used_uf_buffer_bytes + used_uf_header_bytes + - uf_control->address_table.count * sizeof(dma_addr_t); - + buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header); + size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t); /* * The Unsolicited Frame buffers are set at the start of the UF * memory descriptor entry. The headers and address table will be * placed after the buffers. */ - uf_buffer_virt_address = dmam_alloc_coherent(scic_to_dev(scic), size, - &uf_buffer_phys_address, GFP_KERNEL); - if (!uf_buffer_virt_address) + virt = dmam_alloc_coherent(scic_to_dev(scic), size, &dma, GFP_KERNEL); + if (!virt) return -ENOMEM; /* @@ -183,15 +93,8 @@ int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *sci * headers, since we program the UF address table pointers to * NULL. */ - uf_control->headers.physical_address = - uf_buffer_phys_address + - used_uf_buffer_bytes - - unused_uf_header_bytes; - - uf_control->headers.array = - uf_buffer_virt_address + - used_uf_buffer_bytes - - unused_uf_header_bytes; + uf_control->headers.physical_address = dma + buf_len; + uf_control->headers.array = virt + buf_len; /* * Program the location of the UF address table into the SCU. @@ -200,16 +103,8 @@ int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *sci * byte boundary already due to above programming headers being on a * 64-bit boundary and headers are on a 64-bytes in size. */ - uf_control->address_table.physical_address = - uf_buffer_phys_address + - used_uf_buffer_bytes + - used_uf_header_bytes; - - uf_control->address_table.array = - uf_buffer_virt_address + - used_uf_buffer_bytes + - used_uf_header_bytes; - + uf_control->address_table.physical_address = dma + buf_len + header_len; + uf_control->address_table.array = virt + buf_len + header_len; uf_control->get = 0; /* @@ -220,16 +115,26 @@ int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *sci * - Aligned on a 1KB boundary. */ /* - * If the user provided less then the maximum amount of memory, - * then be sure that we programm the first entries in the UF - * address table to NULL. */ - scic_sds_unsolicited_frame_control_construct_frames( - uf_control, - uf_buffer_phys_address, - uf_buffer_virt_address, - unused_uf_header_entries, - used_uf_header_entries - ); + * Program the actual used UF buffers into the UF address table and + * the controller's array of UFs. + */ + for (i = 0; i < SCU_MAX_UNSOLICITED_FRAMES; i++) { + uf = &uf_control->buffers.array[i]; + + uf_control->address_table.array[i] = dma; + + uf->buffer = virt; + uf->header = &uf_control->headers.array[i]; + uf->state = UNSOLICITED_FRAME_EMPTY; + + /* + * Increment the address of the physical and virtual memory + * pointers. Everything is aligned on 1k boundary with an + * increment of 1k. + */ + virt += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + dma += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + } return 0; } @@ -247,7 +152,7 @@ enum sci_status scic_sds_unsolicited_frame_control_get_header( u32 frame_index, void **frame_header) { - if (frame_index < uf_control->address_table.count) { + if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { /* * Skip the first word in the frame since this is a controll word used * by the hardware. */ @@ -272,7 +177,7 @@ enum sci_status scic_sds_unsolicited_frame_control_get_buffer( u32 frame_index, void **frame_buffer) { - if (frame_index < uf_control->address_table.count) { + if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { *frame_buffer = uf_control->buffers.array[frame_index].buffer; return SCI_SUCCESS; @@ -298,26 +203,24 @@ bool scic_sds_unsolicited_frame_control_release_frame( u32 frame_get; u32 frame_cycle; - frame_get = uf_control->get & (uf_control->address_table.count - 1); - frame_cycle = uf_control->get & uf_control->address_table.count; + frame_get = uf_control->get & (SCU_MAX_UNSOLICITED_FRAMES - 1); + frame_cycle = uf_control->get & SCU_MAX_UNSOLICITED_FRAMES; /* * In the event there are NULL entries in the UF table, we need to * advance the get pointer in order to find out if this frame should * be released (i.e. update the get pointer). */ - while (((lower_32_bits(uf_control->address_table.array[frame_get]) - == 0) && - (upper_32_bits(uf_control->address_table.array[frame_get]) - == 0)) && - (frame_get < uf_control->address_table.count)) + while (lower_32_bits(uf_control->address_table.array[frame_get]) == 0 && + upper_32_bits(uf_control->address_table.array[frame_get]) == 0 && + frame_get < SCU_MAX_UNSOLICITED_FRAMES) frame_get++; /* * The table has a NULL entry as it's last element. This is * illegal. */ - BUG_ON(frame_get >= uf_control->address_table.count); + BUG_ON(frame_get >= SCU_MAX_UNSOLICITED_FRAMES); - if (frame_index < uf_control->address_table.count) { + if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED; /* @@ -333,9 +236,8 @@ bool scic_sds_unsolicited_frame_control_release_frame( INCREMENT_QUEUE_GET( frame_get, frame_cycle, - uf_control->address_table.count - 1, - uf_control->address_table.count - ); + SCU_MAX_UNSOLICITED_FRAMES - 1, + SCU_MAX_UNSOLICITED_FRAMES); } uf_control->get = diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h index 0d8ca8c..2954904 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.h +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -144,25 +144,18 @@ struct scic_sds_uf_header_array { */ struct scic_sds_uf_buffer_array { /** - * This field is the minimum number of unsolicited frames supported by the - * hardware and the number of unsolicited frames requested by the software. - */ - u32 count; - - /** - * This field is the SCIC_UNSOLICITED_FRAME data its used to manage + * This field is the unsolicited frame data its used to manage * the data for the unsolicited frame requests. It also represents * the virtual address location that corresponds to the * physical_address field. */ - struct scic_sds_unsolicited_frame array[SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE]; + struct scic_sds_unsolicited_frame array[SCU_MAX_UNSOLICITED_FRAMES]; /** * This field specifies the physical address location for the UF * buffer array. */ dma_addr_t physical_address; - }; /** @@ -174,15 +167,6 @@ struct scic_sds_uf_buffer_array { */ struct scic_sds_uf_address_table_array { /** - * This field specifies the actual programmed size of the - * unsolicited frame buffer address table. The size of the table - * can be larger than the actual number of UF buffers, but it must - * be a power of 2 and the last entry in the table is not allowed - * to be NULL. - */ - u32 count; - - /** * This field represents a virtual pointer that refers to the * starting address of the UF address table. * 64-bit pointers are required by the hardware. -- cgit v0.10.2 From ff717ab05f0c33f93514eccea6dfe1a15983e1d1 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Mon, 20 Jun 2011 14:08:51 -0700 Subject: isci: Move the reset delay after the remote node resumption. Delay after bringing up the RNC to allow for resumption latency. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index b54ef2b..69f17b9 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1433,15 +1433,17 @@ static int isci_reset_device(struct domain_device *dev, int hard_reset) isci_device_clear_reset_pending(ihost, idev); rc = sas_phy_reset(phy, hard_reset); - msleep(2000); /* just like mvsas */ /* Terminate in-progress I/O now. */ isci_remote_device_nuke_requests(ihost, idev); + /* Since all pending TCs have been cleaned, resume the RNC. */ spin_lock_irqsave(&ihost->scic_lock, flags); status = scic_remote_device_reset_complete(&idev->sci); spin_unlock_irqrestore(&ihost->scic_lock, flags); + msleep(2000); /* just like mvsas */ + if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, "%s: scic_remote_device_reset_complete(%p) " -- cgit v0.10.2 From 61aaff49e20fdb700f1300a49962bc76effc77fc Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Tue, 21 Jun 2011 12:16:33 -0700 Subject: isci: filter broadcast change notifications during SMP phy resets When resetting a sata device in the domain we have seen occasions where libsas prematurely marks a device gone in the time it takes for the device to re-establish the link. This plays badly with software raid arrays. Other libsas drivers have non-uniform delays in their reset handlers to try to cover this condition, but not sufficient to close the hole. Given that a sata device can take many seconds to recover we filter bcns and poll for the device reattach state before notifying libsas that the port needs the domain to be rediscovered. Once this has been proven out at the lldd level we can think about uplevelling this feature to a common implementation in libsas. Signed-off-by: Jeff Skirvin [ use kzalloc instead of kmem_cache ] Signed-off-by: Dave Jiang [ use eventq and time macros ] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 74f06f3..2946eee 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -152,6 +152,71 @@ static enum sci_status scic_port_get_properties(struct scic_sds_port *port, return SCI_SUCCESS; } +static void scic_port_bcn_enable(struct scic_sds_port *sci_port) +{ + struct scic_sds_phy *sci_phy; + u32 val; + int i; + + for (i = 0; i < ARRAY_SIZE(sci_port->phy_table); i++) { + sci_phy = sci_port->phy_table[i]; + if (!sci_phy) + continue; + val = readl(&sci_phy->link_layer_registers->link_layer_control); + /* clear the bit by writing 1. */ + writel(val, &sci_phy->link_layer_registers->link_layer_control); + } +} + +/* called under scic_lock to stabilize phy:port associations */ +void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) +{ + int i; + + clear_bit(IPORT_BCN_BLOCKED, &iport->flags); + wake_up(&ihost->eventq); + + if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags)) + return; + + for (i = 0; i < ARRAY_SIZE(iport->sci.phy_table); i++) { + struct scic_sds_phy *sci_phy = iport->sci.phy_table[i]; + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + + if (!sci_phy) + continue; + + ihost->sas_ha.notify_port_event(&iphy->sas_phy, + PORTE_BROADCAST_RCVD); + break; + } +} + +void isci_port_bc_change_received(struct isci_host *ihost, + struct scic_sds_port *sci_port, + struct scic_sds_phy *sci_phy) +{ + struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + struct isci_port *iport = iphy->isci_port; + + if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) { + dev_dbg(&ihost->pdev->dev, + "%s: disabled BCN; isci_phy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); + set_bit(IPORT_BCN_PENDING, &iport->flags); + atomic_inc(&iport->event); + wake_up(&ihost->eventq); + } else { + dev_dbg(&ihost->pdev->dev, + "%s: isci_phy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); + + ihost->sas_ha.notify_port_event(&iphy->sas_phy, + PORTE_BROADCAST_RCVD); + } + scic_port_bcn_enable(sci_port); +} + static void isci_port_link_up(struct isci_host *isci_host, struct scic_sds_port *port, struct scic_sds_phy *phy) @@ -240,13 +305,15 @@ static void isci_port_link_down(struct isci_host *isci_host, if (isci_port) { /* check to see if this is the last phy on this port. */ - if (isci_phy->sas_phy.port - && isci_phy->sas_phy.port->num_phys == 1) { - - /* change the state for all devices on this port. - * The next task sent to this device will be returned - * as SAS_TASK_UNDELIVERED, and the scsi mid layer - * will remove the target + if (isci_phy->sas_phy.port && + isci_phy->sas_phy.port->num_phys == 1) { + atomic_inc(&isci_port->event); + isci_port_bcn_enable(isci_host, isci_port); + + /* change the state for all devices on this port. The + * next task sent to this device will be returned as + * SAS_TASK_UNDELIVERED, and the scsi mid layer will + * remove the target */ list_for_each_entry(isci_device, &isci_port->remote_dev_list, @@ -1033,26 +1100,6 @@ enum sas_linkrate scic_sds_port_get_max_allowed_speed( return max_allowed_speed; } -static void scic_port_enable_broadcast_change_notification(struct scic_sds_port *port) -{ - struct scic_sds_phy *phy; - u32 register_value; - u8 index; - - /* Loop through all of the phys to enable BCN. */ - for (index = 0; index < SCI_MAX_PHYS; index++) { - phy = port->phy_table[index]; - if (phy != NULL) { - register_value = - readl(&phy->link_layer_registers->link_layer_control); - - /* clear the bit by writing 1. */ - writel(register_value, - &phy->link_layer_registers->link_layer_control); - } - } -} - /** * * @sci_port: This is the struct scic_sds_port object to suspend. @@ -1838,6 +1885,7 @@ void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) init_completion(&iport->start_complete); iport->isci_host = ihost; isci_port_change_state(iport, isci_freed); + atomic_set(&iport->event, 0); } /** @@ -1852,19 +1900,6 @@ enum isci_status isci_port_get_state( return isci_port->status; } -static void isci_port_bc_change_received(struct isci_host *ihost, - struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) -{ - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - - dev_dbg(&ihost->pdev->dev, "%s: iphy = %p, sas_phy = %p\n", - __func__, iphy, &iphy->sas_phy); - - ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD); - scic_port_enable_broadcast_change_notification(sci_port); -} - void scic_sds_port_broadcast_change_received( struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy) diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index fee6d80..45c01f8 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -173,6 +173,10 @@ struct scic_sds_port { */ struct isci_port { enum isci_status status; + #define IPORT_BCN_BLOCKED 0 + #define IPORT_BCN_PENDING 1 + unsigned long flags; + atomic_t event; struct isci_host *isci_host; struct asd_sas_port sas_port; struct list_head remote_dev_list; @@ -334,6 +338,7 @@ void scic_sds_port_setup_transports( struct scic_sds_port *sci_port, u32 device_id); +void isci_port_bcn_enable(struct isci_host *, struct isci_port *); void scic_sds_port_deactivate_phy( struct scic_sds_port *sci_port, diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 69f17b9..709c081 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -56,6 +56,7 @@ #include #include #include "sas.h" +#include #include "remote_device.h" #include "remote_node_context.h" #include "isci.h" @@ -1397,11 +1398,250 @@ isci_task_request_complete(struct isci_host *ihost, complete(tmf_complete); } +static void isci_smp_task_timedout(unsigned long _task) +{ + struct sas_task *task = (void *) _task; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + complete(&task->completion); +} + +static void isci_smp_task_done(struct sas_task *task) +{ + if (!del_timer(&task->timer)) + return; + complete(&task->completion); +} + +static struct sas_task *isci_alloc_task(void) +{ + struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL); + + if (task) { + INIT_LIST_HEAD(&task->list); + spin_lock_init(&task->task_state_lock); + task->task_state_flags = SAS_TASK_STATE_PENDING; + init_timer(&task->timer); + init_completion(&task->completion); + } + + return task; +} + +static void isci_free_task(struct isci_host *ihost, struct sas_task *task) +{ + if (task) { + BUG_ON(!list_empty(&task->list)); + kfree(task); + } +} + +static int isci_smp_execute_task(struct isci_host *ihost, + struct domain_device *dev, void *req, + int req_size, void *resp, int resp_size) +{ + int res, retry; + struct sas_task *task = NULL; + + for (retry = 0; retry < 3; retry++) { + task = isci_alloc_task(); + if (!task) + return -ENOMEM; + + task->dev = dev; + task->task_proto = dev->tproto; + sg_init_one(&task->smp_task.smp_req, req, req_size); + sg_init_one(&task->smp_task.smp_resp, resp, resp_size); + + task->task_done = isci_smp_task_done; + + task->timer.data = (unsigned long) task; + task->timer.function = isci_smp_task_timedout; + task->timer.expires = jiffies + 10*HZ; + add_timer(&task->timer); + + res = isci_task_execute_task(task, 1, GFP_KERNEL); + + if (res) { + del_timer(&task->timer); + dev_err(&ihost->pdev->dev, + "%s: executing SMP task failed:%d\n", + __func__, res); + goto ex_err; + } + + wait_for_completion(&task->completion); + res = -ECOMM; + if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + dev_err(&ihost->pdev->dev, + "%s: smp task timed out or aborted\n", + __func__); + isci_task_abort_task(task); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + dev_err(&ihost->pdev->dev, + "%s: SMP task aborted and not done\n", + __func__); + goto ex_err; + } + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAM_STAT_GOOD) { + res = 0; + break; + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_UNDERRUN) { + /* no error, but return the number of bytes of + * underrun */ + res = task->task_status.residual; + break; + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_OVERRUN) { + res = -EMSGSIZE; + break; + } else { + dev_err(&ihost->pdev->dev, + "%s: task to dev %016llx response: 0x%x " + "status 0x%x\n", __func__, + SAS_ADDR(dev->sas_addr), + task->task_status.resp, + task->task_status.stat); + isci_free_task(ihost, task); + task = NULL; + } + } +ex_err: + BUG_ON(retry == 3 && task != NULL); + isci_free_task(ihost, task); + return res; +} + +#define DISCOVER_REQ_SIZE 16 +#define DISCOVER_RESP_SIZE 56 + +int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost, + struct domain_device *dev, + int phy_id, int *adt) +{ + struct smp_resp *disc_resp; + u8 *disc_req; + int res; + + disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL); + if (!disc_resp) + return -ENOMEM; + + disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL); + if (disc_req) { + disc_req[0] = SMP_REQUEST; + disc_req[1] = SMP_DISCOVER; + disc_req[9] = phy_id; + } else { + kfree(disc_resp); + return -ENOMEM; + } + res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (!res) { + if (disc_resp->result != SMP_RESP_FUNC_ACC) + res = disc_resp->result; + else + *adt = disc_resp->disc.attached_dev_type; + } + kfree(disc_req); + kfree(disc_resp); + + return res; +} + +static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num) +{ + struct domain_device *dev = idev->domain_dev; + struct isci_port *iport = idev->isci_port; + struct isci_host *ihost = iport->isci_host; + int res, iteration = 0, attached_device_type; + #define STP_WAIT_MSECS 25000 + unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS); + unsigned long deadline = jiffies + tmo; + enum { + SMP_PHYWAIT_PHYDOWN, + SMP_PHYWAIT_PHYUP, + SMP_PHYWAIT_DONE + } phy_state = SMP_PHYWAIT_PHYDOWN; + + /* While there is time, wait for the phy to go away and come back */ + while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) { + int event = atomic_read(&iport->event); + + ++iteration; + + tmo = wait_event_timeout(ihost->eventq, + event != atomic_read(&iport->event) || + !test_bit(IPORT_BCN_BLOCKED, &iport->flags), + tmo); + /* link down, stop polling */ + if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags)) + break; + + dev_dbg(&ihost->pdev->dev, + "%s: iport %p, iteration %d," + " phase %d: time_remaining %lu, bcns = %d\n", + __func__, iport, iteration, phy_state, + tmo, test_bit(IPORT_BCN_PENDING, &iport->flags)); + + res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num, + &attached_device_type); + tmo = deadline - jiffies; + + if (res) { + dev_warn(&ihost->pdev->dev, + "%s: iteration %d, phase %d:" + " SMP error=%d, time_remaining=%lu\n", + __func__, iteration, phy_state, res, tmo); + break; + } + dev_dbg(&ihost->pdev->dev, + "%s: iport %p, iteration %d," + " phase %d: time_remaining %lu, bcns = %d, " + "attdevtype = %x\n", + __func__, iport, iteration, phy_state, + tmo, test_bit(IPORT_BCN_PENDING, &iport->flags), + attached_device_type); + + switch (phy_state) { + case SMP_PHYWAIT_PHYDOWN: + /* Has the device gone away? */ + if (!attached_device_type) + phy_state = SMP_PHYWAIT_PHYUP; + + break; + + case SMP_PHYWAIT_PHYUP: + /* Has the device come back? */ + if (attached_device_type) + phy_state = SMP_PHYWAIT_DONE; + break; + + case SMP_PHYWAIT_DONE: + break; + } + + } + dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__); +} + static int isci_reset_device(struct domain_device *dev, int hard_reset) { struct isci_remote_device *idev = dev->lldd_dev; struct sas_phy *phy = sas_find_local_phy(dev); struct isci_host *ihost = dev_to_ihost(dev); + struct isci_port *iport = idev->isci_port; enum sci_status status; unsigned long flags; int rc; @@ -1432,6 +1672,10 @@ static int isci_reset_device(struct domain_device *dev, int hard_reset) /* Make sure all pending requests are able to be fully terminated. */ isci_device_clear_reset_pending(ihost, idev); + /* If this is a device on an expander, disable BCN processing. */ + if (!scsi_is_sas_phy_local(phy)) + set_bit(IPORT_BCN_BLOCKED, &iport->flags); + rc = sas_phy_reset(phy, hard_reset); /* Terminate in-progress I/O now. */ @@ -1442,7 +1686,20 @@ static int isci_reset_device(struct domain_device *dev, int hard_reset) status = scic_remote_device_reset_complete(&idev->sci); spin_unlock_irqrestore(&ihost->scic_lock, flags); - msleep(2000); /* just like mvsas */ + /* If this is a device on an expander, bring the phy back up. */ + if (!scsi_is_sas_phy_local(phy)) { + /* A phy reset will cause the device to go away then reappear. + * Since libsas will take action on incoming BCNs (eg. remove + * a device going through an SMP phy-control driven reset), + * we need to wait until the phy comes back up before letting + * discovery proceed in libsas. + */ + isci_wait_for_smp_phy_reset(idev, phy->number); + + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_port_bcn_enable(ihost, idev->isci_port); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, -- cgit v0.10.2 From cde76fbf1f27551a08860227765ae8d5026ac0d9 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Mon, 20 Jun 2011 14:09:06 -0700 Subject: isci: Add decode for SMP request retry error condition There are situations with slow expanders in which a first attempt to execute an SMP request will fail with a timeout. Immediate subsequent retries will generally succeed. This change makes sure SMP I/O failures are immediately failed to libsas so that retries happen with no discovery process timeout delay. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 8bd1f7d..3a891d3 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2508,9 +2508,16 @@ static void isci_request_handle_controller_specific_errors( /* Task in the target is not done. */ *response_ptr = SAS_TASK_UNDELIVERED; *status_ptr = SAM_STAT_TASK_ABORTED; - request->complete_in_target = false; - *complete_to_host_ptr = isci_perform_error_io_completion; + if (task->task_proto == SAS_PROTOCOL_SMP) { + request->complete_in_target = true; + + *complete_to_host_ptr = isci_perform_normal_io_completion; + } else { + request->complete_in_target = false; + + *complete_to_host_ptr = isci_perform_error_io_completion; + } break; } } @@ -2882,6 +2889,21 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, request->complete_in_target = false; break; + case SCI_FAILURE_RETRY_REQUIRED: + + /* Fail the I/O so it can be retried. */ + response = SAS_TASK_UNDELIVERED; + if ((isci_device->status == isci_stopping) || + (isci_device->status == isci_stopped)) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_normal_io_completion; + request->complete_in_target = true; + break; + + default: /* Catch any otherwise unhandled error codes here. */ dev_warn(&isci_host->pdev->dev, @@ -2901,8 +2923,13 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, else status = SAS_ABORTED_TASK; - complete_to_host = isci_perform_error_io_completion; - request->complete_in_target = false; + if (SAS_PROTOCOL_SMP == task->task_proto) { + request->complete_in_target = true; + complete_to_host = isci_perform_normal_io_completion; + } else { + request->complete_in_target = false; + complete_to_host = isci_perform_error_io_completion; + } break; } break; diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 432b81a..c8dd075 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -301,6 +301,27 @@ isci_task_set_completion_status( task->task_status.stat = status; switch (task_notification_selection) { + + case isci_perform_error_io_completion: + + if (task->task_proto == SAS_PROTOCOL_SMP) { + /* There is no error escalation in the SMP case. + * Convert to a normal completion to avoid the + * timeout in the discovery path and to let the + * next action take place quickly. + */ + task_notification_selection + = isci_perform_normal_io_completion; + + /* Fall through to the normal case... */ + } else { + /* Use sas_task_abort */ + /* Leave SAS_TASK_STATE_DONE clear + * Leave SAS_TASK_AT_INITIATOR set. + */ + break; + } + case isci_perform_aborted_io_completion: /* This path can occur with task-managed requests as well as * requests terminated because of LUN or device resets. @@ -313,12 +334,6 @@ isci_task_set_completion_status( default: WARN_ONCE(1, "unknown task_notification_selection: %d\n", task_notification_selection); - /* Fall through to the error case... */ - case isci_perform_error_io_completion: - /* Use sas_task_abort */ - /* Leave SAS_TASK_STATE_DONE clear - * Leave SAS_TASK_AT_INITIATOR set. - */ break; } -- cgit v0.10.2 From f53a3a32c1e799e27f63bff7b42b4c36749e5e6f Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Mon, 20 Jun 2011 14:09:11 -0700 Subject: isci: Requests that do not start must be set to "complete" Requests that fail at start because of a reset pending condition must be set to complete in order to allow for later cleanup. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 3a891d3..5879e5f 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -3678,18 +3678,19 @@ int isci_request_execute( * Update it's status and add it to the list in the * remote device object. */ - isci_request_change_state(request, started); list_add(&request->dev_node, &isci_device->reqs_in_process); if (status == SCI_SUCCESS) { /* Save the tag for possible task mgmt later. */ request->io_tag = request->sci.io_tag; + isci_request_change_state(request, started); } else { /* The request did not really start in the * hardware, so clear the request handle * here so no terminations will be done. */ request->terminated = true; + isci_request_change_state(request, completed); } spin_unlock_irqrestore(&isci_host->scic_lock, flags); -- cgit v0.10.2 From 77c852f312243192b1f2ce7fc56d678784786692 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Mon, 20 Jun 2011 14:09:16 -0700 Subject: isci: Handle timed-out request terminations correctly In the situation where a termination of an I/O times-out, make sure that the linkage from the request to the task is severed completely. Also make sure that the selection of tasks to terminate occurs under scic_lock. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 5879e5f..433565c 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2741,6 +2741,15 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, spin_unlock(&request->state_lock); break; + case dead: + /* This was a terminated request that timed-out during the + * termination process. There is no task to complete to + * libsas. + */ + complete_to_host = isci_perform_normal_io_completion; + spin_unlock(&request->state_lock); + break; + default: /* The request is done from an SCU HW perspective. */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 709c081..573cf1c 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -567,31 +567,33 @@ static enum isci_request_status isci_task_validate_request_to_abort( return old_state; } +/** +* isci_request_cleanup_completed_loiterer() - This function will take care of +* the final cleanup on any request which has been explicitly terminated. +* @isci_host: This parameter specifies the ISCI host object +* @isci_device: This is the device to which the request is pending. +* @isci_request: This parameter specifies the terminated request object. +* @task: This parameter is the libsas I/O request. +*/ static void isci_request_cleanup_completed_loiterer( - struct isci_host *isci_host, + struct isci_host *isci_host, struct isci_remote_device *isci_device, - struct isci_request *isci_request) + struct isci_request *isci_request, + struct sas_task *task) { - struct sas_task *task; - unsigned long flags; - - task = (isci_request->ttype == io_task) - ? isci_request_access_task(isci_request) - : NULL; + unsigned long flags; dev_dbg(&isci_host->pdev->dev, "%s: isci_device=%p, request=%p, task=%p\n", __func__, isci_device, isci_request, task); - spin_lock_irqsave(&isci_host->scic_lock, flags); - list_del_init(&isci_request->dev_node); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - if (task != NULL) { spin_lock_irqsave(&task->task_state_lock, flags); task->lldd_task = NULL; + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + isci_set_task_doneflags(task); /* If this task is not in the abort path, call task_done. */ @@ -602,61 +604,16 @@ static void isci_request_cleanup_completed_loiterer( } else spin_unlock_irqrestore(&task->task_state_lock, flags); } - isci_request_free(isci_host, isci_request); -} - -/** -* @isci_termination_timed_out(): this function will deal with a request for -* which the wait for termination has timed-out. -* -* @isci_host This SCU. -* @isci_request The I/O request being terminated. -*/ -static void -isci_termination_timed_out( - struct isci_host * host, - struct isci_request * request - ) -{ - unsigned long state_flags; - - dev_warn(&host->pdev->dev, - "%s: host = %p; request = %p\n", - __func__, host, request); - /* At this point, the request to terminate - * has timed out. The best we can do is to - * have the request die a silent death - * if it ever completes. - */ - spin_lock_irqsave(&request->state_lock, state_flags); - - if (request->status == started) { - - /* Set the request state to "dead", - * and clear the task pointer so that an actual - * completion event callback doesn't do - * anything. - */ - request->status = dead; - - /* Clear the timeout completion event pointer.*/ - request->io_request_completion = NULL; - - if (request->ttype == io_task) { - - /* Break links with the sas_task. */ - if (request->ttype_ptr.io_task_ptr != NULL) { + if (isci_request != NULL) { + spin_lock_irqsave(&isci_host->scic_lock, flags); + list_del_init(&isci_request->dev_node); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); - request->ttype_ptr.io_task_ptr->lldd_task = NULL; - request->ttype_ptr.io_task_ptr = NULL; - } - } + isci_request_free(isci_host, isci_request); } - spin_unlock_irqrestore(&request->state_lock, state_flags); } - /** * isci_terminate_request_core() - This function will terminate the given * request, and wait for it to complete. This function must only be called @@ -666,7 +623,6 @@ isci_termination_timed_out( * @isci_device: The target. * @isci_request: The I/O request to be terminated. * - * */ static void isci_terminate_request_core( struct isci_host *isci_host, @@ -677,9 +633,10 @@ static void isci_terminate_request_core( bool was_terminated = false; bool needs_cleanup_handling = false; enum isci_request_status request_status; - unsigned long flags; - unsigned long timeout_remaining; - + unsigned long flags; + unsigned long termination_completed = 1; + struct completion *io_request_completion; + struct sas_task *task; dev_dbg(&isci_host->pdev->dev, "%s: device = %p; request = %p\n", @@ -687,6 +644,12 @@ static void isci_terminate_request_core( spin_lock_irqsave(&isci_host->scic_lock, flags); + io_request_completion = isci_request->io_request_completion; + + task = (isci_request->ttype == io_task) + ? isci_request_access_task(isci_request) + : NULL; + /* Note that we are not going to control * the target to abort the request. */ @@ -715,119 +678,112 @@ static void isci_terminate_request_core( dev_err(&isci_host->pdev->dev, "%s: scic_controller_terminate_request" " returned = 0x%x\n", - __func__, - status); - /* Clear the completion pointer from the request. */ + __func__, status); + isci_request->io_request_completion = NULL; } else { if (was_terminated) { dev_dbg(&isci_host->pdev->dev, - "%s: before completion wait (%p)\n", - __func__, - isci_request->io_request_completion); + "%s: before completion wait (%p/%p)\n", + __func__, isci_request, io_request_completion); /* Wait here for the request to complete. */ - #define TERMINATION_TIMEOUT_MSEC 50 - timeout_remaining + #define TERMINATION_TIMEOUT_MSEC 500 + termination_completed = wait_for_completion_timeout( - isci_request->io_request_completion, + io_request_completion, msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC)); - if (!timeout_remaining) { + if (!termination_completed) { + + /* The request to terminate has timed out. */ + spin_lock_irqsave(&isci_host->scic_lock, + flags); + + /* Check for state changes. */ + if (!isci_request->terminated) { + + /* The best we can do is to have the + * request die a silent death if it + * ever really completes. + * + * Set the request state to "dead", + * and clear the task pointer so that + * an actual completion event callback + * doesn't do anything. + */ + isci_request->status = dead; + isci_request->io_request_completion + = NULL; + + if (isci_request->ttype == io_task) { + + /* Break links with the + * sas_task. + */ + isci_request->ttype_ptr.io_task_ptr + = NULL; + } + } else + termination_completed = 1; + + spin_unlock_irqrestore(&isci_host->scic_lock, + flags); - isci_termination_timed_out(isci_host, - isci_request); + if (!termination_completed) { - dev_err(&isci_host->pdev->dev, - "%s: *** Timeout waiting for " - "termination(%p/%p)\n", - __func__, - isci_request->io_request_completion, - isci_request); + dev_err(&isci_host->pdev->dev, + "%s: *** Timeout waiting for " + "termination(%p/%p)\n", + __func__, io_request_completion, + isci_request); - } else + /* The request can no longer be referenced + * safely since it may go away if the + * termination every really does complete. + */ + isci_request = NULL; + } + } + if (termination_completed) dev_dbg(&isci_host->pdev->dev, - "%s: after completion wait (%p)\n", - __func__, - isci_request->io_request_completion); + "%s: after completion wait (%p/%p)\n", + __func__, isci_request, io_request_completion); } - /* Clear the completion pointer from the request. */ - isci_request->io_request_completion = NULL; - /* Peek at the status of the request. This will tell - * us if there was special handling on the request such that it - * needs to be detached and freed here. - */ - spin_lock_irqsave(&isci_request->state_lock, flags); - request_status = isci_request_get_state(isci_request); - - if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ - && ((request_status == aborted) - || (request_status == aborting) - || (request_status == terminating) - || (request_status == completed) - || (request_status == dead) - ) - ) { - - /* The completion routine won't free a request in - * the aborted/aborting/etc. states, so we do - * it here. - */ - needs_cleanup_handling = true; - } - spin_unlock_irqrestore(&isci_request->state_lock, flags); - - if (needs_cleanup_handling) - isci_request_cleanup_completed_loiterer( - isci_host, isci_device, isci_request - ); - } -} + if (termination_completed) { -static void isci_terminate_request( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - struct isci_request *isci_request, - enum isci_request_status new_request_state) -{ - enum isci_request_status old_state; - DECLARE_COMPLETION_ONSTACK(request_completion); + isci_request->io_request_completion = NULL; - /* Change state to "new_request_state" if it is currently "started" */ - old_state = isci_request_change_started_to_newstate( - isci_request, - &request_completion, - new_request_state - ); + /* Peek at the status of the request. This will tell + * us if there was special handling on the request such that it + * needs to be detached and freed here. + */ + spin_lock_irqsave(&isci_request->state_lock, flags); + request_status = isci_request_get_state(isci_request); + + if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ + && ((request_status == aborted) + || (request_status == aborting) + || (request_status == terminating) + || (request_status == completed) + || (request_status == dead) + ) + ) { + + /* The completion routine won't free a request in + * the aborted/aborting/etc. states, so we do + * it here. + */ + needs_cleanup_handling = true; + } + spin_unlock_irqrestore(&isci_request->state_lock, flags); - if ((old_state == started) || - (old_state == completed) || - (old_state == aborting)) { - - /* If the old_state is started: - * This request was not already being aborted. If it had been, - * then the aborting I/O (ie. the TMF request) would not be in - * the aborting state, and thus would be terminated here. Note - * that since the TMF completion's call to the kernel function - * "complete()" does not happen until the pending I/O request - * terminate fully completes, we do not have to implement a - * special wait here for already aborting requests - the - * termination of the TMF request will force the request - * to finish it's already started terminate. - * - * If old_state == completed: - * This request completed from the SCU hardware perspective - * and now just needs cleaning up in terms of freeing the - * request and potentially calling up to libsas. - * - * If old_state == aborting: - * This request has already gone through a TMF timeout, but may - * not have been terminated; needs cleaning up at least. - */ - isci_terminate_request_core(isci_host, isci_device, - isci_request); + } + if (needs_cleanup_handling) + isci_request_cleanup_completed_loiterer( + isci_host, isci_device, isci_request, task); } } @@ -850,9 +806,8 @@ void isci_terminate_pending_requests( struct isci_request *request; struct isci_request *next_request; unsigned long flags; - struct list_head aborted_request_list; - - INIT_LIST_HEAD(&aborted_request_list); + enum isci_request_status old_state; + DECLARE_COMPLETION_ONSTACK(request_completion); dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p (new request state = %d)\n", @@ -860,31 +815,62 @@ void isci_terminate_pending_requests( spin_lock_irqsave(&isci_host->scic_lock, flags); - /* Move all of the pending requests off of the device list. */ - list_splice_init(&isci_device->reqs_in_process, - &aborted_request_list); - - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - - /* Iterate through the now-local list. */ + /* Iterate through the list. */ list_for_each_entry_safe(request, next_request, - &aborted_request_list, dev_node) { + &isci_device->reqs_in_process, dev_node) { - dev_warn(&isci_host->pdev->dev, - "%s: isci_device=%p request=%p; task=%p\n", - __func__, - isci_device, request, - ((request->ttype == io_task) - ? isci_request_access_task(request) - : NULL)); + init_completion(&request_completion); - /* Mark all still pending I/O with the selected next - * state, terminate and free it. + /* Change state to "new_request_state" if it is currently + * "started". */ - isci_terminate_request(isci_host, isci_device, - request, new_request_state - ); + old_state = isci_request_change_started_to_newstate( + request, + &request_completion, + new_request_state); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + if ((old_state == started) || + (old_state == completed) || + (old_state == aborting)) { + + dev_warn(&isci_host->pdev->dev, + "%s: isci_device=%p request=%p; task=%p " + "old_state=%d\n", + __func__, + isci_device, request, + ((request->ttype == io_task) + ? isci_request_access_task(request) + : NULL), + old_state); + + /* If the old_state is started: + * This request was not already being aborted. If it had been, + * then the aborting I/O (ie. the TMF request) would not be in + * the aborting state, and thus would be terminated here. Note + * that since the TMF completion's call to the kernel function + * "complete()" does not happen until the pending I/O request + * terminate fully completes, we do not have to implement a + * special wait here for already aborting requests - the + * termination of the TMF request will force the request + * to finish it's already started terminate. + * + * If old_state == completed: + * This request completed from the SCU hardware perspective + * and now just needs cleaning up in terms of freeing the + * request and potentially calling up to libsas. + * + * If old_state == aborting: + * This request has already gone through a TMF timeout, but may + * not have been terminated; needs cleaning up at least. + */ + isci_terminate_request_core(isci_host, isci_device, + request); + } + spin_lock_irqsave(&isci_host->scic_lock, flags); } + spin_unlock_irqrestore(&isci_host->scic_lock, flags); } /** @@ -1257,9 +1243,9 @@ int isci_task_abort_task(struct sas_task *task) if (ret == TMF_RESP_FUNC_COMPLETE) { old_request->complete_in_target = true; - /* Clean up the request on our side, and wait for the aborted I/O to - * complete. - */ + /* Clean up the request on our side, and wait for the aborted + * I/O to complete. + */ isci_terminate_request_core(isci_host, isci_device, old_request); } -- cgit v0.10.2 From 980d3aeb3828b0fdf2a0b2e893d238130b014575 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 20 Jun 2011 15:11:22 -0700 Subject: isci: fix isci_terminate_pending() list management Walk through the list of pending requests being careful to consider that multiple requests can be terminated when the lock is dropped (i.e. invalidating the 'next' reference established by list_for_each_entry_safe). Also noticed that all callers to isci_terminate_pending_requests() specifying terminating, so just drop the parameter. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 3b555dc..45592ad 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1272,7 +1272,7 @@ void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remot "%s: idev = %p\n", __func__, idev); /* Cleanup all requests pending for this device. */ - isci_terminate_pending_requests(ihost, idev, terminating); + isci_terminate_pending_requests(ihost, idev); dev_dbg(&ihost->pdev->dev, "%s: idev = %p, done\n", __func__, idev); diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 547c35c..ac9368c 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -776,9 +776,8 @@ isci_request_io_request_get_next_sge(struct isci_request *request, } void -isci_terminate_pending_requests(struct isci_host *isci_host, - struct isci_remote_device *isci_device, - enum isci_request_status new_request_state); +isci_terminate_pending_requests(struct isci_host *ihost, + struct isci_remote_device *idev); enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 573cf1c..01032dc 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -796,81 +796,79 @@ static void isci_terminate_request_core( * @isci_host: This parameter specifies SCU. * @isci_device: This parameter specifies the target. * - * */ -void isci_terminate_pending_requests( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - enum isci_request_status new_request_state) +void isci_terminate_pending_requests(struct isci_host *ihost, + struct isci_remote_device *idev) { - struct isci_request *request; - struct isci_request *next_request; - unsigned long flags; + struct completion request_completion; enum isci_request_status old_state; - DECLARE_COMPLETION_ONSTACK(request_completion); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p (new request state = %d)\n", - __func__, isci_device, new_request_state); + unsigned long flags; + LIST_HEAD(list); - spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock_irqsave(&ihost->scic_lock, flags); + list_splice_init(&idev->reqs_in_process, &list); - /* Iterate through the list. */ - list_for_each_entry_safe(request, next_request, - &isci_device->reqs_in_process, dev_node) { + /* assumes that isci_terminate_request_core deletes from the list */ + while (!list_empty(&list)) { + struct isci_request *ireq = list_entry(list.next, typeof(*ireq), dev_node); - init_completion(&request_completion); + /* Change state to "terminating" if it is currently + * "started". + */ + old_state = isci_request_change_started_to_newstate(ireq, + &request_completion, + terminating); + switch (old_state) { + case started: + case completed: + case aborting: + break; + default: + /* termination in progress, or otherwise dispositioned. + * We know the request was on 'list' so should be safe + * to move it back to reqs_in_process + */ + list_move(&ireq->dev_node, &idev->reqs_in_process); + ireq = NULL; + break; + } - /* Change state to "new_request_state" if it is currently - * "started". - */ - old_state = isci_request_change_started_to_newstate( - request, - &request_completion, - new_request_state); + if (!ireq) + continue; + spin_unlock_irqrestore(&ihost->scic_lock, flags); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + init_completion(&request_completion); - if ((old_state == started) || - (old_state == completed) || - (old_state == aborting)) { - - dev_warn(&isci_host->pdev->dev, - "%s: isci_device=%p request=%p; task=%p " - "old_state=%d\n", - __func__, - isci_device, request, - ((request->ttype == io_task) - ? isci_request_access_task(request) - : NULL), - old_state); - - /* If the old_state is started: - * This request was not already being aborted. If it had been, - * then the aborting I/O (ie. the TMF request) would not be in - * the aborting state, and thus would be terminated here. Note - * that since the TMF completion's call to the kernel function - * "complete()" does not happen until the pending I/O request - * terminate fully completes, we do not have to implement a - * special wait here for already aborting requests - the - * termination of the TMF request will force the request - * to finish it's already started terminate. - * - * If old_state == completed: - * This request completed from the SCU hardware perspective - * and now just needs cleaning up in terms of freeing the - * request and potentially calling up to libsas. - * - * If old_state == aborting: - * This request has already gone through a TMF timeout, but may - * not have been terminated; needs cleaning up at least. - */ - isci_terminate_request_core(isci_host, isci_device, - request); - } - spin_lock_irqsave(&isci_host->scic_lock, flags); + dev_dbg(&ihost->pdev->dev, + "%s: idev=%p request=%p; task=%p old_state=%d\n", + __func__, idev, ireq, + ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL, + old_state); + + /* If the old_state is started: + * This request was not already being aborted. If it had been, + * then the aborting I/O (ie. the TMF request) would not be in + * the aborting state, and thus would be terminated here. Note + * that since the TMF completion's call to the kernel function + * "complete()" does not happen until the pending I/O request + * terminate fully completes, we do not have to implement a + * special wait here for already aborting requests - the + * termination of the TMF request will force the request + * to finish it's already started terminate. + * + * If old_state == completed: + * This request completed from the SCU hardware perspective + * and now just needs cleaning up in terms of freeing the + * request and potentially calling up to libsas. + * + * If old_state == aborting: + * This request has already gone through a TMF timeout, but may + * not have been terminated; needs cleaning up at least. + */ + isci_terminate_request_core(ihost, idev, ireq); + spin_lock_irqsave(&ihost->scic_lock, flags); } - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); } /** @@ -965,8 +963,7 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) if (ret == TMF_RESP_FUNC_COMPLETE) /* Terminate all I/O now. */ isci_terminate_pending_requests(isci_host, - isci_device, - terminating); + isci_device); return ret; } -- cgit v0.10.2 From fd53660120b5eda06539225de56755dc389a4e64 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Mon, 20 Jun 2011 14:09:22 -0700 Subject: isci: Explicitly decode remote node ready and suspended states The remote node context should only signal a device reset condition in a suspended state. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 9e8967e..b6774bc 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -603,12 +603,23 @@ enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_nod enum scis_sds_remote_node_context_states state; state = sci_rnc->sm.current_state_id; - if (state != SCI_RNC_READY) { + + switch (state) { + case SCI_RNC_READY: + return SCI_SUCCESS; + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: + case SCI_RNC_AWAIT_SUSPENSION: dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), "%s: invalid state %d\n", __func__, state); return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + default: + break; } - return SCI_SUCCESS; + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: requested to start IO while still resuming, %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; } enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_node_context *sci_rnc, -- cgit v0.10.2 From fd0527ab15bfd96f04b084b1b2550f80cf151b60 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Mon, 20 Jun 2011 14:09:26 -0700 Subject: isci: Hard reset failure will link reset all phys in the port In the case where the hard reset process fails, each link in the port is put through a link reset sequence. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 2946eee..e540281 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1916,7 +1916,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor { unsigned long flags; enum sci_status status; - int ret = TMF_RESP_FUNC_COMPLETE; + int idx, ret = TMF_RESP_FUNC_COMPLETE; dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n", __func__, iport); @@ -1953,14 +1953,26 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor * the same as link failures on all phys in the port. */ if (ret != TMF_RESP_FUNC_COMPLETE) { + dev_err(&ihost->pdev->dev, "%s: iport = %p; hard reset failed " - "(0x%x) - sending link down to libsas for phy %p\n", - __func__, iport, iport->hard_reset_status, iphy); + "(0x%x) - driving explicit link fail for all phys\n", + __func__, iport, iport->hard_reset_status); - isci_port_link_down(ihost, iphy, iport); - } + /* Down all phys in the port. */ + spin_lock_irqsave(&ihost->scic_lock, flags); + for (idx = 0; idx < SCI_MAX_PHYS; ++idx) { + + if (iport->sci.phy_table[idx] != NULL) { + scic_sds_phy_stop( + iport->sci.phy_table[idx]); + scic_sds_phy_start( + iport->sci.phy_table[idx]); + } + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } return ret; } -- cgit v0.10.2 From 9b917987fd16d0687afe550a02f68099419f5d43 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Mon, 20 Jun 2011 14:09:31 -0700 Subject: isci: Disable link layer hang detection Some targets exceed the hang detect timer. Use the OS timeout to catch hung tasks. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 784c9a7..93a401d 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -242,11 +242,8 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); } - /* - * Set the link layer hang detection to 500ms (0x1F4) from its default - * value of 128ms. Max value is 511 ms. - */ - writel(0x1F4, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); + /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */ + writel(0, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ sci_change_state(&sci_phy->sm, SCI_PHY_STOPPED); -- cgit v0.10.2 From ac668c69709c7d927015c5cf3d9e87bf4eaaf57d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 7 Jun 2011 18:50:55 -0700 Subject: isci: cleanup/optimize pool implementation The circ_buf macros are ~6% faster, as measured by perf, because they take advantage of power-of-two math assumptions i.e. no test and branch for rollover. Their semantics are clearer than the hidden side effects in pool.h (like sci_pool_get() which hides an assignment). Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 41a7c50..343655b 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -52,6 +52,7 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include #include #include "host.h" @@ -1054,6 +1055,33 @@ done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } +static void isci_tci_free(struct isci_host *ihost, u16 tci) +{ + u16 tail = ihost->tci_tail & (SCI_MAX_IO_REQUESTS-1); + + ihost->tci_pool[tail] = tci; + ihost->tci_tail = tail + 1; +} + +static u16 isci_tci_alloc(struct isci_host *ihost) +{ + u16 head = ihost->tci_head & (SCI_MAX_IO_REQUESTS-1); + u16 tci = ihost->tci_pool[head]; + + ihost->tci_head = head + 1; + return tci; +} + +static u16 isci_tci_active(struct isci_host *ihost) +{ + return CIRC_CNT(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); +} + +static u16 isci_tci_space(struct isci_host *ihost) +{ + return CIRC_SPACE(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); +} + static enum sci_status scic_controller_start(struct scic_sds_controller *scic, u32 timeout) { @@ -1069,9 +1097,11 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, } /* Build the TCi free pool */ - sci_pool_initialize(scic->tci_pool); + BUILD_BUG_ON(SCI_MAX_IO_REQUESTS > 1 << sizeof(ihost->tci_pool[0]) * 8); + ihost->tci_head = 0; + ihost->tci_tail = 0; for (index = 0; index < scic->task_context_entries; index++) - sci_pool_put(scic->tci_pool, index); + isci_tci_free(ihost, index); /* Build the RNi free pool */ scic_sds_remote_node_table_initialize( @@ -3063,18 +3093,17 @@ enum sci_task_status scic_controller_start_task( * currently available tags to be allocated. All return other values indicate a * legitimate tag. */ -u16 scic_controller_allocate_io_tag( - struct scic_sds_controller *scic) +u16 scic_controller_allocate_io_tag(struct scic_sds_controller *scic) { - u16 task_context; - u16 sequence_count; - - if (!sci_pool_empty(scic->tci_pool)) { - sci_pool_get(scic->tci_pool, task_context); + struct isci_host *ihost = scic_to_ihost(scic); + u16 tci; + u16 seq; - sequence_count = scic->io_request_sequence[task_context]; + if (isci_tci_space(ihost)) { + tci = isci_tci_alloc(ihost); + seq = scic->io_request_sequence[tci]; - return scic_sds_io_tag_construct(sequence_count, task_context); + return scic_sds_io_tag_construct(seq, tci); } return SCI_CONTROLLER_INVALID_IO_TAG; @@ -3105,10 +3134,10 @@ u16 scic_controller_allocate_io_tag( * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag * is not a valid IO tag value. */ -enum sci_status scic_controller_free_io_tag( - struct scic_sds_controller *scic, - u16 io_tag) +enum sci_status scic_controller_free_io_tag(struct scic_sds_controller *scic, + u16 io_tag) { + struct isci_host *ihost = scic_to_ihost(scic); u16 sequence; u16 index; @@ -3117,18 +3146,16 @@ enum sci_status scic_controller_free_io_tag( sequence = scic_sds_io_tag_get_sequence(io_tag); index = scic_sds_io_tag_get_index(io_tag); - if (!sci_pool_full(scic->tci_pool)) { - if (sequence == scic->io_request_sequence[index]) { - scic_sds_io_sequence_increment( - scic->io_request_sequence[index]); + /* prevent tail from passing head */ + if (isci_tci_active(ihost) == 0) + return SCI_FAILURE_INVALID_IO_TAG; - sci_pool_put(scic->tci_pool, index); + if (sequence == scic->io_request_sequence[index]) { + scic_sds_io_sequence_increment(scic->io_request_sequence[index]); - return SCI_SUCCESS; - } - } + isci_tci_free(ihost, index); + return SCI_SUCCESS; + } return SCI_FAILURE_INVALID_IO_TAG; } - - diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 74035004..c61a9fa 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -57,7 +57,6 @@ #include "remote_device.h" #include "phy.h" -#include "pool.h" #include "isci.h" #include "remote_node_table.h" #include "registers.h" @@ -180,11 +179,6 @@ struct scic_sds_controller { struct scic_remote_node_table available_remote_nodes; /** - * This field is the TCi pool used to manage the task context index. - */ - SCI_POOL_CREATE(tci_pool, u16, SCI_MAX_IO_REQUESTS); - - /** * This filed is the struct scic_power_control data used to controll when direct * attached devices can consume power. */ @@ -310,6 +304,10 @@ struct scic_sds_controller { struct isci_host { struct scic_sds_controller sci; + u16 tci_head; + u16 tci_tail; + u16 tci_pool[SCI_MAX_IO_REQUESTS]; + union scic_oem_parameters oem_parameters; int id; /* unique within a given pci device */ @@ -423,8 +421,6 @@ enum scic_sds_controller_states { SCIC_FAILED, }; - - /** * struct isci_pci_info - This class represents the pci function containing the * controllers. Depending on PCI SKU, there could be up to 2 controllers in diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 714ed92..84ba533 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -112,6 +112,7 @@ static inline void check_sizes(void) BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES); BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES); BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES); + BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_IO_REQUESTS); } /** diff --git a/drivers/scsi/isci/pool.h b/drivers/scsi/isci/pool.h deleted file mode 100644 index 016ec83..0000000 --- a/drivers/scsi/isci/pool.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This file contains the interface to the pool class. This class allows two - * different two different priority tasks to insert and remove items from - * the free pool. The user of the pool is expected to evaluate the pool - * condition empty before a get operation and pool condition full before a - * put operation. Methods Provided: - sci_pool_create() - - * sci_pool_initialize() - sci_pool_empty() - sci_pool_full() - - * sci_pool_get() - sci_pool_put() - * - * - */ - -#ifndef _SCI_POOL_H_ -#define _SCI_POOL_H_ - -/** - * SCI_POOL_INCREMENT() - - * - * Private operation for the pool - */ -#define SCI_POOL_INCREMENT(pool, index) \ - (((index) + 1) == (pool).size ? 0 : (index) + 1) - -/** - * SCI_POOL_CREATE() - - * - * This creates a pool structure of pool_name. The members in the pool are of - * type with number of elements equal to size. - */ -#define SCI_POOL_CREATE(pool_name, type, pool_size) \ - struct \ - { \ - u32 size; \ - u32 get; \ - u32 put; \ - type array[(pool_size) + 1]; \ - } pool_name - - -/** - * sci_pool_empty() - - * - * This macro evaluates the pool and returns true if the pool is empty. If the - * pool is empty the user should not perform any get operation on the pool. - */ -#define sci_pool_empty(pool) \ - ((pool).get == (pool).put) - -/** - * sci_pool_full() - - * - * This macro evaluates the pool and returns true if the pool is full. If the - * pool is full the user should not perform any put operation. - */ -#define sci_pool_full(pool) \ - (SCI_POOL_INCREMENT(pool, (pool).put) == (pool).get) - -/** - * sci_pool_size() - - * - * This macro returns the size of the pool created. The internal size of the - * pool is actually 1 larger then necessary in order to ensure get and put - * pointers can be written simultaneously by different users. As a result, - * this macro subtracts 1 from the internal size - */ -#define sci_pool_size(pool) \ - ((pool).size - 1) - -/** - * sci_pool_count() - - * - * This macro indicates the number of elements currently contained in the pool. - */ -#define sci_pool_count(pool) \ - (\ - sci_pool_empty((pool)) \ - ? 0 \ - : (\ - sci_pool_full((pool)) \ - ? sci_pool_size((pool)) \ - : (\ - (pool).get > (pool).put \ - ? ((pool).size - (pool).get + (pool).put) \ - : ((pool).put - (pool).get) \ - ) \ - ) \ - ) - -/** - * sci_pool_initialize() - - * - * This macro initializes the pool to an empty condition. - */ -#define sci_pool_initialize(pool) \ - { \ - (pool).size = (sizeof((pool).array) / sizeof((pool).array[0])); \ - (pool).get = 0; \ - (pool).put = 0; \ - } - -/** - * sci_pool_get() - - * - * This macro will get the next free element from the pool. This should only be - * called if the pool is not empty. - */ -#define sci_pool_get(pool, my_value) \ - { \ - (my_value) = (pool).array[(pool).get]; \ - (pool).get = SCI_POOL_INCREMENT((pool), (pool).get); \ - } - -/** - * sci_pool_put() - - * - * This macro will put the value into the pool. This should only be called if - * the pool is not full. - */ -#define sci_pool_put(pool, value) \ - { \ - (pool).array[(pool).put] = (value); \ - (pool).put = SCI_POOL_INCREMENT((pool), (pool).put); \ - } - -/** - * sci_pool_erase() - - * - * This macro will search the pool and remove any elements in the pool matching - * the supplied value. This method can only be utilized on pools - */ -#define sci_pool_erase(pool, type, value) \ - { \ - type tmp_value; \ - u32 index; \ - u32 element_count = sci_pool_count((pool)); \ - \ - for (index = 0; index < element_count; index++) { \ - sci_pool_get((pool), tmp_value); \ - if (tmp_value != (value)) \ - sci_pool_put((pool), tmp_value); \ - } \ - } - -#endif /* _SCI_POOL_H_ */ -- cgit v0.10.2 From dd047c8e2bca22856050dbe0378a37cf44eecc97 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 9 Jun 2011 11:06:58 -0700 Subject: isci: cleanup tag macros A tag is a 16 bit number where the upper four bits is a sequence number and the remainder is the task context index (tci). Sanitize the macro names and shave 256-bytes out of scic_sds_controller by reducing the size of io_request_sequence. scic_sds_io_tag_construct --> ISCI_TAG scic_sds_io_tag_get_sequence --> ISCI_TAG_SEQ scic_sds_io_tag_get_index() --> ISCI_TAG_TCI scic_sds_io_sequence_increment() [delete / open code] Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 343655b..3c7042b 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -284,23 +284,16 @@ static void scic_sds_controller_task_completion(struct scic_sds_controller *scic u32 completion_entry) { u32 index; - struct scic_sds_request *io_request; + struct scic_sds_request *sci_req; index = SCU_GET_COMPLETION_INDEX(completion_entry); - io_request = scic->io_request_table[index]; + sci_req = scic->io_request_table[index]; /* Make sure that we really want to process this IO request */ - if ( - (io_request != NULL) - && (io_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) - && ( - scic_sds_io_tag_get_sequence(io_request->io_tag) - == scic->io_request_sequence[index] - ) - ) { + if (sci_req && sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && + ISCI_TAG_SEQ(sci_req->io_tag) == scic->io_request_sequence[index]) /* Yep this is a valid io request pass it along to the io request handler */ - scic_sds_io_request_tc_completion(io_request, completion_entry); - } + scic_sds_io_request_tc_completion(sci_req, completion_entry); } static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic, @@ -2682,37 +2675,28 @@ void scic_sds_controller_copy_task_context( sci_req->task_context_buffer = task_context_buffer; } -/** - * This method returns the task context buffer for the given io tag. - * @scic: - * @io_tag: - * - * struct scu_task_context* - */ -struct scu_task_context *scic_sds_controller_get_task_context_buffer( - struct scic_sds_controller *scic, - u16 io_tag - ) { - u16 task_index = scic_sds_io_tag_get_index(io_tag); +struct scu_task_context *scic_sds_controller_get_task_context_buffer(struct scic_sds_controller *scic, + u16 io_tag) +{ + u16 tci = ISCI_TAG_TCI(io_tag); - if (task_index < scic->task_context_entries) { - return &scic->task_context_table[task_index]; + if (tci < scic->task_context_entries) { + return &scic->task_context_table[tci]; } return NULL; } -struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, - u16 io_tag) +struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 io_tag) { u16 task_index; u16 task_sequence; - task_index = scic_sds_io_tag_get_index(io_tag); + task_index = ISCI_TAG_TCI(io_tag); - if (task_index < scic->task_context_entries) { + if (task_index < scic->task_context_entries) { if (scic->io_request_table[task_index] != NULL) { - task_sequence = scic_sds_io_tag_get_sequence(io_tag); + task_sequence = ISCI_TAG_SEQ(io_tag); if (task_sequence == scic->io_request_sequence[task_index]) { return scic->io_request_table[task_index]; @@ -2875,11 +2859,10 @@ void scic_sds_controller_release_frame( * successfully started the IO request. SCI_SUCCESS if the IO request was * successfully started. Determine the failure situations and return values. */ -enum sci_status scic_controller_start_io( - struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, - struct scic_sds_request *req, - u16 io_tag) +enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, + struct scic_sds_remote_device *rdev, + struct scic_sds_request *req, + u16 io_tag) { enum sci_status status; @@ -2892,7 +2875,7 @@ enum sci_status scic_controller_start_io( if (status != SCI_SUCCESS) return status; - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + scic->io_request_table[ISCI_TAG_TCI(req->io_tag)] = req; scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); return SCI_SUCCESS; } @@ -2979,7 +2962,7 @@ enum sci_status scic_controller_complete_io( if (status != SCI_SUCCESS) return status; - index = scic_sds_io_tag_get_index(request->io_tag); + index = ISCI_TAG_TCI(request->io_tag); scic->io_request_table[index] = NULL; return SCI_SUCCESS; default: @@ -2998,7 +2981,7 @@ enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) return SCI_FAILURE_INVALID_STATE; } - scic->io_request_table[scic_sds_io_tag_get_index(sci_req->io_tag)] = sci_req; + scic->io_request_table[ISCI_TAG_TCI(sci_req->io_tag)] = sci_req; scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req)); return SCI_SUCCESS; } @@ -3050,7 +3033,7 @@ enum sci_task_status scic_controller_start_task( status = scic_sds_remote_device_start_task(scic, rdev, req); switch (status) { case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + scic->io_request_table[ISCI_TAG_TCI(req->io_tag)] = req; /* * We will let framework know this task request started successfully, @@ -3059,7 +3042,7 @@ enum sci_task_status scic_controller_start_task( */ return SCI_SUCCESS; case SCI_SUCCESS: - scic->io_request_table[scic_sds_io_tag_get_index(req->io_tag)] = req; + scic->io_request_table[ISCI_TAG_TCI(req->io_tag)] = req; scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); @@ -3096,14 +3079,12 @@ enum sci_task_status scic_controller_start_task( u16 scic_controller_allocate_io_tag(struct scic_sds_controller *scic) { struct isci_host *ihost = scic_to_ihost(scic); - u16 tci; - u16 seq; if (isci_tci_space(ihost)) { - tci = isci_tci_alloc(ihost); - seq = scic->io_request_sequence[tci]; + u16 tci = isci_tci_alloc(ihost); + u8 seq = scic->io_request_sequence[tci]; - return scic_sds_io_tag_construct(seq, tci); + return ISCI_TAG(seq, tci); } return SCI_CONTROLLER_INVALID_IO_TAG; @@ -3138,22 +3119,17 @@ enum sci_status scic_controller_free_io_tag(struct scic_sds_controller *scic, u16 io_tag) { struct isci_host *ihost = scic_to_ihost(scic); - u16 sequence; - u16 index; - - BUG_ON(io_tag == SCI_CONTROLLER_INVALID_IO_TAG); - - sequence = scic_sds_io_tag_get_sequence(io_tag); - index = scic_sds_io_tag_get_index(io_tag); + u16 tci = ISCI_TAG_TCI(io_tag); + u16 seq = ISCI_TAG_SEQ(io_tag); /* prevent tail from passing head */ if (isci_tci_active(ihost) == 0) return SCI_FAILURE_INVALID_IO_TAG; - if (sequence == scic->io_request_sequence[index]) { - scic_sds_io_sequence_increment(scic->io_request_sequence[index]); + if (seq == scic->io_request_sequence[tci]) { + scic->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1); - isci_tci_free(ihost, index); + isci_tci_free(ihost, ISCI_TAG_TCI(io_tag)); return SCI_SUCCESS; } diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index c61a9fa..7d17ab8 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -184,13 +184,8 @@ struct scic_sds_controller { */ struct scic_power_control power_control; - /** - * This field is the array of sequence values for the IO Tag fields. Even - * though only 4 bits of the field is used for the sequence the sequence is 16 - * bits in size so the sequence can be bitwise or'd with the TCi to build the - * IO Tag value. - */ - u16 io_request_sequence[SCI_MAX_IO_REQUESTS]; + /* sequence number per tci */ + u8 io_request_sequence[SCI_MAX_IO_REQUESTS]; /** * This field in the array of sequence values for the RNi. These are used @@ -552,40 +547,12 @@ static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic) */ #define scic_sds_controller_get_protocol_engine_group(controller) 0 -/** - * scic_sds_io_tag_construct() - - * - * This macro constructs an IO tag from the sequence and index values. - */ -#define scic_sds_io_tag_construct(sequence, task_index) \ - ((sequence) << 12 | (task_index)) - -/** - * scic_sds_io_tag_get_sequence() - - * - * This macro returns the IO sequence from the IO tag value. - */ -#define scic_sds_io_tag_get_sequence(io_tag) \ - (((io_tag) & 0xF000) >> 12) - -/** - * scic_sds_io_tag_get_index() - - * - * This macro returns the TCi from the io tag value - */ -#define scic_sds_io_tag_get_index(io_tag) \ - ((io_tag) & 0x0FFF) +/* see scic_controller_io_tag_allocate|free for how seq and tci are built */ +#define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci) -/** - * scic_sds_io_sequence_increment() - - * - * This is a helper macro to increment the io sequence count. We may find in - * the future that it will be faster to store the sequence count in such a way - * as we dont perform the shift operation to build io tag values so therefore - * need a way to incrment them correctly - */ -#define scic_sds_io_sequence_increment(value) \ - ((value) = (((value) + 1) & 0x000F)) +/* these are returned by the hardware, so sanitize them */ +#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1)) +#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) /* expander attached sata devices require 3 rnc slots */ static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev) diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 84ba533..81bade4 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -83,6 +83,7 @@ enum sci_controller_mode { #define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ #define SCI_MAX_REMOTE_DEVICES (256UL) #define SCI_MAX_IO_REQUESTS (256UL) +#define SCI_MAX_SEQ (16) #define SCI_MAX_MSIX_MESSAGES (2) #define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */ #define SCI_MAX_CONTROLLERS 2 @@ -113,6 +114,7 @@ static inline void check_sizes(void) BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES); BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES); BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_IO_REQUESTS); + BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_SEQ); } /** diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index e540281..fb66e30da 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -689,23 +689,16 @@ static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u1 rnc->ssp.arbitration_wait_time = 0; } -/** - * scic_sds_port_construct_dummy_task() - create dummy task for si workaround - * @sci_port The logical port on which we need to create the - * remote node context. - * context. - * @tci The remote node index for this remote node context. - * - * This routine will construct a dummy task context data structure. This +/* + * construct a dummy task context data structure. This * structure will be posted to the hardwre to work around a scheduler error * in the hardware. - * */ -static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci) +static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tag) { struct scu_task_context *task_context; - task_context = scic_sds_controller_get_task_context_buffer(sci_port->owning_controller, tci); + task_context = scic_sds_controller_get_task_context_buffer(sci_port->owning_controller, tag); memset(task_context, 0, sizeof(struct scu_task_context)); @@ -716,7 +709,7 @@ static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u task_context->protocol_engine_index = 0; task_context->logical_port_index = sci_port->physical_port_index; task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; - task_context->task_index = scic_sds_io_tag_get_index(tci); + task_context->task_index = ISCI_TAG_TCI(tag); task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 433565c..9d7531a 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -258,7 +258,7 @@ static void scu_ssp_reqeust_construct_task_context( SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | (scic_sds_port_get_index(target_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sds_request->io_tag)); + ISCI_TAG_TCI(sds_request->io_tag)); } else { /* * Build the task context now since we have already read @@ -433,7 +433,7 @@ static void scu_sata_reqeust_construct_task_context( SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | (scic_sds_port_get_index(target_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sci_req->io_tag)); + ISCI_TAG_TCI(sci_req->io_tag)); } else { /* * Build the task context now since we have already read @@ -741,7 +741,7 @@ static u32 sci_req_tx_bytes(struct scic_sds_request *sci_req) */ ret_val = readl(scu_reg_base + (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + - ((sizeof(struct scu_task_context)) * scic_sds_io_tag_get_index(sci_req->io_tag))); + ((sizeof(struct scu_task_context)) * ISCI_TAG_TCI(sci_req->io_tag))); } return ret_val; @@ -777,7 +777,7 @@ enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) if (sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { task_context = sci_req->task_context_buffer; - task_context->task_index = scic_sds_io_tag_get_index(sci_req->io_tag); + task_context->task_index = ISCI_TAG_TCI(sci_req->io_tag); switch (task_context->protocol_type) { case SCU_TASK_CONTEXT_PROTOCOL_SMP: @@ -811,7 +811,7 @@ enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) scic_sds_controller_copy_task_context(scic, sci_req); /* Add to the post_context the io tag value */ - sci_req->post_context |= scic_sds_io_tag_get_index(sci_req->io_tag); + sci_req->post_context |= ISCI_TAG_TCI(sci_req->io_tag); /* Everything is good go ahead and change state */ sci_change_state(&sci_req->sm, SCI_REQ_STARTED); @@ -3325,7 +3325,7 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | (scic_sds_port_get_index(sci_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - scic_sds_io_tag_get_index(sci_req->io_tag)); + ISCI_TAG_TCI(sci_req->io_tag)); } else { /* * Build the task context now since we have already read -- cgit v0.10.2 From 994a9303d33f8238d57f58c26067b6d4ac9af222 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 9 Jun 2011 16:04:28 -0700 Subject: isci: cleanup/optimize queue increment macros Every single i/o or event completion incurs a test and branch to see if the cycle bit changed. For power-of-2 queue sizes the cycle bit can be read directly from the rollover of the queue pointer. Likely premature optimization, but the hidden if() and hidden assignments / side-effects in the macros were already asking to be cleaned up. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 3c7042b..ae9edae 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -123,34 +123,6 @@ ) /** - * INCREMENT_COMPLETION_QUEUE_GET() - - * - * This macro will increment the controllers completion queue index value and - * possibly toggle the cycle bit if the completion queue index wraps back to 0. - */ -#define INCREMENT_COMPLETION_QUEUE_GET(controller, index, cycle) \ - INCREMENT_QUEUE_GET(\ - (index), \ - (cycle), \ - SCU_MAX_COMPLETION_QUEUE_ENTRIES, \ - SMU_CQGR_CYCLE_BIT) - -/** - * INCREMENT_EVENT_QUEUE_GET() - - * - * This macro will increment the controllers event queue index value and - * possibly toggle the event cycle bit if the event queue index wraps back to 0. - */ -#define INCREMENT_EVENT_QUEUE_GET(controller, index, cycle) \ - INCREMENT_QUEUE_GET(\ - (index), \ - (cycle), \ - SCU_MAX_EVENTS, \ - SMU_CQGR_EVENT_CYCLE_BIT \ - ) - - -/** * NORMALIZE_GET_POINTER() - * * This macro will normalize the completion queue get pointer so its value can @@ -528,15 +500,13 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci } } - - static void scic_sds_controller_process_completions(struct scic_sds_controller *scic) { u32 completion_count = 0; u32 completion_entry; u32 get_index; u32 get_cycle; - u32 event_index; + u32 event_get; u32 event_cycle; dev_dbg(scic_to_dev(scic), @@ -548,7 +518,7 @@ static void scic_sds_controller_process_completions(struct scic_sds_controller * get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get); get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get; - event_index = NORMALIZE_EVENT_POINTER(scic->completion_queue_get); + event_get = NORMALIZE_EVENT_POINTER(scic->completion_queue_get); event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get; while ( @@ -558,7 +528,11 @@ static void scic_sds_controller_process_completions(struct scic_sds_controller * completion_count++; completion_entry = scic->completion_queue[get_index]; - INCREMENT_COMPLETION_QUEUE_GET(scic, get_index, get_cycle); + + /* increment the get pointer and check for rollover to toggle the cycle bit */ + get_cycle ^= ((get_index+1) & SCU_MAX_COMPLETION_QUEUE_ENTRIES) << + (SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT - SCU_MAX_COMPLETION_QUEUE_SHIFT); + get_index = (get_index+1) & (SCU_MAX_COMPLETION_QUEUE_ENTRIES-1); dev_dbg(scic_to_dev(scic), "%s: completion queue entry:0x%08x\n", @@ -579,18 +553,14 @@ static void scic_sds_controller_process_completions(struct scic_sds_controller * break; case SCU_COMPLETION_TYPE_EVENT: - INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); - scic_sds_controller_event_completion(scic, completion_entry); - break; + case SCU_COMPLETION_TYPE_NOTIFY: { + event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) << + (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT); + event_get = (event_get+1) & (SCU_MAX_EVENTS-1); - case SCU_COMPLETION_TYPE_NOTIFY: - /* - * Presently we do the same thing with a notify event that we do with the - * other event codes. */ - INCREMENT_EVENT_QUEUE_GET(scic, event_index, event_cycle); scic_sds_controller_event_completion(scic, completion_entry); break; - + } default: dev_warn(scic_to_dev(scic), "%s: SCIC Controller received unknown " @@ -607,7 +577,7 @@ static void scic_sds_controller_process_completions(struct scic_sds_controller * SMU_CQGR_GEN_BIT(ENABLE) | SMU_CQGR_GEN_BIT(EVENT_ENABLE) | event_cycle | - SMU_CQGR_GEN_VAL(EVENT_POINTER, event_index) | + SMU_CQGR_GEN_VAL(EVENT_POINTER, event_get) | get_cycle | SMU_CQGR_GEN_VAL(POINTER, get_index); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 7d17ab8..94fd54d 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -524,22 +524,6 @@ static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic) } /** - * INCREMENT_QUEUE_GET() - - * - * This macro will increment the specified index to and if the index wraps to 0 - * it will toggel the cycle bit. - */ -#define INCREMENT_QUEUE_GET(index, cycle, entry_count, bit_toggle) \ - { \ - if ((index) + 1 == entry_count) { \ - (index) = 0; \ - (cycle) = (cycle) ^ (bit_toggle); \ - } else { \ - index = index + 1; \ - } \ - } - -/** * scic_sds_controller_get_protocol_engine_group() - * * This macro returns the protocol engine group for this controller object. diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 81bade4..2073283 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -90,7 +90,8 @@ enum sci_controller_mode { #define SCI_MAX_DOMAINS SCI_MAX_PORTS #define SCU_MAX_CRITICAL_NOTIFICATIONS (384) -#define SCU_MAX_EVENTS (128) +#define SCU_MAX_EVENTS_SHIFT (7) +#define SCU_MAX_EVENTS (1 << SCU_MAX_EVENTS_SHIFT) #define SCU_MAX_UNSOLICITED_FRAMES (128) #define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) #define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ @@ -98,6 +99,7 @@ enum sci_controller_mode { + SCU_MAX_UNSOLICITED_FRAMES \ + SCI_MAX_IO_REQUESTS \ + SCU_MAX_COMPLETION_QUEUE_SCRATCH) +#define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES)) #define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) #define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024) diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c index d895707..680582d 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.c +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -209,7 +209,8 @@ bool scic_sds_unsolicited_frame_control_release_frame( /* * In the event there are NULL entries in the UF table, we need to * advance the get pointer in order to find out if this frame should - * be released (i.e. update the get pointer). */ + * be released (i.e. update the get pointer) + */ while (lower_32_bits(uf_control->address_table.array[frame_get]) == 0 && upper_32_bits(uf_control->address_table.array[frame_get]) == 0 && frame_get < SCU_MAX_UNSOLICITED_FRAMES) @@ -217,40 +218,37 @@ bool scic_sds_unsolicited_frame_control_release_frame( /* * The table has a NULL entry as it's last element. This is - * illegal. */ + * illegal. + */ BUG_ON(frame_get >= SCU_MAX_UNSOLICITED_FRAMES); + if (frame_index >= SCU_MAX_UNSOLICITED_FRAMES) + return false; - if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { - uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED; + uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED; + if (frame_get != frame_index) { /* - * The frame index is equal to the current get pointer so we - * can now free up all of the frame entries that */ - if (frame_get == frame_index) { - while ( - uf_control->buffers.array[frame_get].state - == UNSOLICITED_FRAME_RELEASED - ) { - uf_control->buffers.array[frame_get].state = UNSOLICITED_FRAME_EMPTY; - - INCREMENT_QUEUE_GET( - frame_get, - frame_cycle, - SCU_MAX_UNSOLICITED_FRAMES - 1, - SCU_MAX_UNSOLICITED_FRAMES); - } - - uf_control->get = - (SCU_UFQGP_GEN_BIT(ENABLE_BIT) | frame_cycle | frame_get); + * Frames remain in use until we advance the get pointer + * so there is nothing we can do here + */ + return false; + } - return true; - } else { - /* - * Frames remain in use until we advance the get pointer - * so there is nothing we can do here */ - } + /* + * The frame index is equal to the current get pointer so we + * can now free up all of the frame entries that + */ + while (uf_control->buffers.array[frame_get].state == UNSOLICITED_FRAME_RELEASED) { + uf_control->buffers.array[frame_get].state = UNSOLICITED_FRAME_EMPTY; + + if (frame_get+1 == SCU_MAX_UNSOLICITED_FRAMES-1) { + frame_cycle ^= SCU_MAX_UNSOLICITED_FRAMES; + frame_get = 0; + } else + frame_get++; } - return false; -} + uf_control->get = SCU_UFQGP_GEN_BIT(ENABLE_BIT) | frame_cycle | frame_get; + return true; +} -- cgit v0.10.2 From 0d0cf14c9bd2943ed5afd15df459f564d85eacde Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 13 Jun 2011 00:51:30 -0700 Subject: isci: cleanup request allocation Rather than return an error code and update a pointer that was passed by reference just return the request object directly (or null if allocation failed). Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 9d7531a..f0813d0 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -3510,172 +3510,110 @@ static enum sci_status isci_io_request_build( return SCI_SUCCESS; } -/** - * isci_request_alloc_core() - This function gets the request object from the - * isci_host dma cache. - * @isci_host: This parameter specifies the ISCI host object - * @isci_request: This parameter will contain the pointer to the new - * isci_request object. - * @isci_device: This parameter is the pointer to the isci remote device object - * that is the destination for this request. - * @gfp_flags: This parameter specifies the os allocation flags. - * - * SCI_SUCCESS on successfull completion, or specific failure code. - */ -static int isci_request_alloc_core( - struct isci_host *isci_host, - struct isci_request **isci_request, - struct isci_remote_device *isci_device, - gfp_t gfp_flags) +static struct isci_request *isci_request_alloc_core(struct isci_host *ihost, + struct isci_remote_device *idev, + gfp_t gfp_flags) { - int ret = 0; dma_addr_t handle; - struct isci_request *request; - + struct isci_request *ireq; - /* get pointer to dma memory. This actually points - * to both the isci_remote_device object and the - * sci object. The isci object is at the beginning - * of the memory allocated here. - */ - request = dma_pool_alloc(isci_host->dma_pool, gfp_flags, &handle); - if (!request) { - dev_warn(&isci_host->pdev->dev, + ireq = dma_pool_alloc(ihost->dma_pool, gfp_flags, &handle); + if (!ireq) { + dev_warn(&ihost->pdev->dev, "%s: dma_pool_alloc returned NULL\n", __func__); - return -ENOMEM; + return NULL; } /* initialize the request object. */ - spin_lock_init(&request->state_lock); - request->request_daddr = handle; - request->isci_host = isci_host; - request->isci_device = isci_device; - request->io_request_completion = NULL; - request->terminated = false; + spin_lock_init(&ireq->state_lock); + ireq->request_daddr = handle; + ireq->isci_host = ihost; + ireq->isci_device = idev; + ireq->io_request_completion = NULL; + ireq->terminated = false; - request->num_sg_entries = 0; + ireq->num_sg_entries = 0; - request->complete_in_target = false; + ireq->complete_in_target = false; - INIT_LIST_HEAD(&request->completed_node); - INIT_LIST_HEAD(&request->dev_node); + INIT_LIST_HEAD(&ireq->completed_node); + INIT_LIST_HEAD(&ireq->dev_node); - *isci_request = request; - isci_request_change_state(request, allocated); + isci_request_change_state(ireq, allocated); - return ret; + return ireq; } -static int isci_request_alloc_io( - struct isci_host *isci_host, - struct sas_task *task, - struct isci_request **isci_request, - struct isci_remote_device *isci_device, - gfp_t gfp_flags) +static struct isci_request *isci_request_alloc_io(struct isci_host *ihost, + struct sas_task *task, + struct isci_remote_device *idev, + gfp_t gfp_flags) { - int retval = isci_request_alloc_core(isci_host, isci_request, - isci_device, gfp_flags); - - if (!retval) { - (*isci_request)->ttype_ptr.io_task_ptr = task; - (*isci_request)->ttype = io_task; + struct isci_request *ireq; - task->lldd_task = *isci_request; + ireq = isci_request_alloc_core(ihost, idev, gfp_flags); + if (ireq) { + ireq->ttype_ptr.io_task_ptr = task; + ireq->ttype = io_task; + task->lldd_task = ireq; } - return retval; + return ireq; } -/** - * isci_request_alloc_tmf() - This function gets the request object from the - * isci_host dma cache and initializes the relevant fields as a sas_task. - * @isci_host: This parameter specifies the ISCI host object - * @sas_task: This parameter is the task struct from the upper layer driver. - * @isci_request: This parameter will contain the pointer to the new - * isci_request object. - * @isci_device: This parameter is the pointer to the isci remote device object - * that is the destination for this request. - * @gfp_flags: This parameter specifies the os allocation flags. - * - * SCI_SUCCESS on successfull completion, or specific failure code. - */ -int isci_request_alloc_tmf( - struct isci_host *isci_host, - struct isci_tmf *isci_tmf, - struct isci_request **isci_request, - struct isci_remote_device *isci_device, - gfp_t gfp_flags) +struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + struct isci_remote_device *idev, + gfp_t gfp_flags) { - int retval = isci_request_alloc_core(isci_host, isci_request, - isci_device, gfp_flags); - - if (!retval) { + struct isci_request *ireq; - (*isci_request)->ttype_ptr.tmf_task_ptr = isci_tmf; - (*isci_request)->ttype = tmf_task; + ireq = isci_request_alloc_core(ihost, idev, gfp_flags); + if (ireq) { + ireq->ttype_ptr.tmf_task_ptr = isci_tmf; + ireq->ttype = tmf_task; } - return retval; + return ireq; } -/** - * isci_request_execute() - This function allocates the isci_request object, - * all fills in some common fields. - * @isci_host: This parameter specifies the ISCI host object - * @sas_task: This parameter is the task struct from the upper layer driver. - * @isci_request: This parameter will contain the pointer to the new - * isci_request object. - * @gfp_flags: This parameter specifies the os allocation flags. - * - * SCI_SUCCESS on successfull completion, or specific failure code. - */ -int isci_request_execute( - struct isci_host *isci_host, - struct sas_task *task, - struct isci_request **isci_request, - gfp_t gfp_flags) +int isci_request_execute(struct isci_host *ihost, struct sas_task *task, + gfp_t gfp_flags) { - int ret = 0; - struct scic_sds_remote_device *sci_device; enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - struct isci_remote_device *isci_device; - struct isci_request *request; + struct scic_sds_remote_device *sci_dev; + struct isci_remote_device *idev; + struct isci_request *ireq; unsigned long flags; + int ret = 0; - isci_device = task->dev->lldd_dev; - sci_device = &isci_device->sci; + idev = task->dev->lldd_dev; + sci_dev = &idev->sci; /* do common allocation and init of request object. */ - ret = isci_request_alloc_io( - isci_host, - task, - &request, - isci_device, - gfp_flags - ); - - if (ret) + ireq = isci_request_alloc_io(ihost, task, idev, gfp_flags); + if (!ireq) goto out; - status = isci_io_request_build(isci_host, request, isci_device); + status = isci_io_request_build(ihost, ireq, idev); if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: request_construct failed - status = 0x%x\n", __func__, status); goto out; } - spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock_irqsave(&ihost->scic_lock, flags); /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io(&isci_host->sci, sci_device, - &request->sci, + status = scic_controller_start_io(&ihost->sci, sci_dev, + &ireq->sci, SCI_CONTROLLER_INVALID_IO_TAG); if (status != SCI_SUCCESS && status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: failed request start (0x%x)\n", __func__, status); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); goto out; } @@ -3687,21 +3625,21 @@ int isci_request_execute( * Update it's status and add it to the list in the * remote device object. */ - list_add(&request->dev_node, &isci_device->reqs_in_process); + list_add(&ireq->dev_node, &idev->reqs_in_process); if (status == SCI_SUCCESS) { /* Save the tag for possible task mgmt later. */ - request->io_tag = request->sci.io_tag; - isci_request_change_state(request, started); + ireq->io_tag = ireq->sci.io_tag; + isci_request_change_state(ireq, started); } else { /* The request did not really start in the * hardware, so clear the request handle * here so no terminations will be done. */ - request->terminated = true; - isci_request_change_state(request, completed); + ireq->terminated = true; + isci_request_change_state(ireq, completed); } - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); if (status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { @@ -3716,7 +3654,7 @@ int isci_request_execute( /* Cause this task to be scheduled in the SCSI error * handler thread. */ - isci_execpath_callback(isci_host, task, + isci_execpath_callback(ihost, task, sas_task_abort); /* Change the status, since we are holding @@ -3729,11 +3667,10 @@ int isci_request_execute( out: if (status != SCI_SUCCESS) { /* release dma memory on failure. */ - isci_request_free(isci_host, request); - request = NULL; + isci_request_free(ihost, ireq); + ireq = NULL; ret = SCI_FAILURE; } - *isci_request = request; return ret; } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index ac9368c..8de2542 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -679,16 +679,13 @@ static inline void isci_request_free(struct isci_host *isci_host, #define isci_request_access_tmf(req) ((req)->ttype_ptr.tmf_task_ptr) -int isci_request_alloc_tmf(struct isci_host *isci_host, - struct isci_tmf *isci_tmf, - struct isci_request **isci_request, - struct isci_remote_device *isci_device, - gfp_t gfp_flags); - +struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + struct isci_remote_device *idev, + gfp_t gfp_flags); int isci_request_execute(struct isci_host *isci_host, struct sas_task *task, - struct isci_request **request, gfp_t gfp_flags); /** diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 01032dc..ded81cd 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -146,7 +146,6 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) { struct isci_host *ihost = dev_to_ihost(task->dev); - struct isci_request *request = NULL; struct isci_remote_device *device; unsigned long flags; int ret; @@ -226,8 +225,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) spin_unlock_irqrestore(&task->task_state_lock, flags); /* build and send the request. */ - status = isci_request_execute(ihost, task, &request, - gfp_flags); + status = isci_request_execute(ihost, task, gfp_flags); if (status != SCI_SUCCESS) { @@ -254,54 +252,34 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) return 0; } - - -/** - * isci_task_request_build() - This function builds the task request object. - * @isci_host: This parameter specifies the ISCI host object - * @request: This parameter points to the isci_request object allocated in the - * request construct function. - * @tmf: This parameter is the task management struct to be built - * - * SCI_SUCCESS on successfull completion, or specific failure code. - */ -static enum sci_status isci_task_request_build( - struct isci_host *isci_host, - struct isci_request **isci_request, - struct isci_tmf *isci_tmf) +static struct isci_request *isci_task_request_build(struct isci_host *ihost, + struct isci_tmf *isci_tmf) { - struct scic_sds_remote_device *sci_device; + struct scic_sds_remote_device *sci_dev; enum sci_status status = SCI_FAILURE; - struct isci_request *request = NULL; - struct isci_remote_device *isci_device; + struct isci_request *ireq = NULL; + struct isci_remote_device *idev; struct domain_device *dev; - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: isci_tmf = %p\n", __func__, isci_tmf); - isci_device = isci_tmf->device; - sci_device = &isci_device->sci; - dev = isci_device->domain_dev; + idev = isci_tmf->device; + sci_dev = &idev->sci; + dev = idev->domain_dev; /* do common allocation and init of request object. */ - status = isci_request_alloc_tmf( - isci_host, - isci_tmf, - &request, - isci_device, - GFP_ATOMIC - ); - - if (status != SCI_SUCCESS) - goto out; + ireq = isci_request_alloc_tmf(ihost, isci_tmf, idev, GFP_ATOMIC); + if (!ireq) + return NULL; /* let the core do it's construct. */ - status = scic_task_request_construct(&isci_host->sci, sci_device, + status = scic_task_request_construct(&ihost->sci, sci_dev, SCI_CONTROLLER_INVALID_IO_TAG, - &request->sci); + &ireq->sci); if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: scic_task_request_construct failed - " "status = 0x%x\n", __func__, @@ -312,30 +290,23 @@ static enum sci_status isci_task_request_build( /* XXX convert to get this from task->tproto like other drivers */ if (dev->dev_type == SAS_END_DEV) { isci_tmf->proto = SAS_PROTOCOL_SSP; - status = scic_task_request_construct_ssp(&request->sci); + status = scic_task_request_construct_ssp(&ireq->sci); if (status != SCI_SUCCESS) goto errout; } if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { isci_tmf->proto = SAS_PROTOCOL_SATA; - status = isci_sata_management_task_request_build(request); + status = isci_sata_management_task_request_build(ireq); if (status != SCI_SUCCESS) goto errout; } - - goto out; - + return ireq; errout: - - /* release the dma memory if we fail. */ - isci_request_free(isci_host, request); - request = NULL; - - out: - *isci_request = request; - return status; + isci_request_free(ihost, ireq); + ireq = NULL; + return ireq; } /** @@ -350,16 +321,14 @@ static enum sci_status isci_task_request_build( * TMF_RESP_FUNC_COMPLETE on successful completion of the TMF (this includes * error conditions reported in the IU status), or TMF_RESP_FUNC_FAILED. */ -int isci_task_execute_tmf( - struct isci_host *isci_host, - struct isci_tmf *tmf, - unsigned long timeout_ms) +int isci_task_execute_tmf(struct isci_host *ihost, struct isci_tmf *tmf, + unsigned long timeout_ms) { DECLARE_COMPLETION_ONSTACK(completion); enum sci_task_status status = SCI_TASK_FAILURE; struct scic_sds_remote_device *sci_device; struct isci_remote_device *isci_device = tmf->device; - struct isci_request *request; + struct isci_request *ireq; int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; unsigned long timeleft; @@ -368,13 +337,13 @@ int isci_task_execute_tmf( * if the device is not there and ready. */ if (!isci_device || isci_device->status != isci_ready_for_io) { - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p not ready (%d)\n", __func__, isci_device, isci_device->status); return TMF_RESP_FUNC_FAILED; } else - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, isci_device); @@ -383,64 +352,59 @@ int isci_task_execute_tmf( /* Assign the pointer to the TMF's completion kernel wait structure. */ tmf->complete = &completion; - isci_task_request_build( - isci_host, - &request, - tmf - ); - - if (!request) { - dev_warn(&isci_host->pdev->dev, + ireq = isci_task_request_build(ihost, tmf); + if (!ireq) { + dev_warn(&ihost->pdev->dev, "%s: isci_task_request_build failed\n", __func__); return TMF_RESP_FUNC_FAILED; } - spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock_irqsave(&ihost->scic_lock, flags); /* start the TMF io. */ status = scic_controller_start_task( - &isci_host->sci, + &ihost->sci, sci_device, - &request->sci, + &ireq->sci, SCI_CONTROLLER_INVALID_IO_TAG); if (status != SCI_TASK_SUCCESS) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: start_io failed - status = 0x%x, request = %p\n", __func__, status, - request); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + ireq); + spin_unlock_irqrestore(&ihost->scic_lock, flags); goto cleanup_request; } if (tmf->cb_state_func != NULL) tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data); - isci_request_change_state(request, started); + isci_request_change_state(ireq, started); /* add the request to the remote device request list. */ - list_add(&request->dev_node, &isci_device->reqs_in_process); + list_add(&ireq->dev_node, &isci_device->reqs_in_process); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the TMF to complete, or a timeout. */ timeleft = wait_for_completion_timeout(&completion, jiffies + msecs_to_jiffies(timeout_ms)); if (timeleft == 0) { - spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock_irqsave(&ihost->scic_lock, flags); if (tmf->cb_state_func != NULL) tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); status = scic_controller_terminate_request( - &request->isci_host->sci, - &request->isci_device->sci, - &request->sci); + &ireq->isci_host->sci, + &ireq->isci_device->sci, + &ireq->sci); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); } isci_print_tmf(tmf); @@ -448,7 +412,7 @@ int isci_task_execute_tmf( if (tmf->status == SCI_SUCCESS) ret = TMF_RESP_FUNC_COMPLETE; else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) { - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: tmf.status == " "SCI_FAILURE_IO_RESPONSE_VALID\n", __func__); @@ -456,18 +420,18 @@ int isci_task_execute_tmf( } /* Else - leave the default "failed" status alone. */ - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: completed request = %p\n", __func__, - request); + ireq); - if (request->io_request_completion != NULL) { + if (ireq->io_request_completion != NULL) { /* A thread is waiting for this TMF to finish. */ - complete(request->io_request_completion); + complete(ireq->io_request_completion); } cleanup_request: - isci_request_free(isci_host, request); + isci_request_free(ihost, ireq); return ret; } -- cgit v0.10.2 From 360b03ed178a4fe3971b0a098d8feeb53333481b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 15 Jun 2011 11:11:03 -0700 Subject: isci: fix ssp response iu buffer size in isci_tmf In isci_task_request_complete() we save the response/sense data from the command. Make sure isci_tmf has enough space to hold the full response. [ it does not look like we actually use this data, and response_data_len/sense_data_len should be specifying the byte count, in any event do the simple fix first so we don't corrupt memory ] Reported-by: Adam Gruchala Tested-by: Edmund Nadolski Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index c8dd075..d574a18 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -100,7 +100,8 @@ struct isci_tmf { union { struct ssp_response_iu resp_iu; struct dev_to_host_fis d2h_fis; - } resp; + u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; + } resp; unsigned char lun[8]; u16 io_tag; struct isci_remote_device *device; -- cgit v0.10.2 From 209fae14fabfd48525e5630bebbbd4ca15090c60 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 13 Jun 2011 17:39:44 -0700 Subject: isci: atomic device lookup and reference counting We have unsafe references to remote devices that are notified to disappear at lldd_dev_gone. In order to clean this up we need a single canonical source for device lookups and stable references once a lookup succeeds. Towards that end guarantee that domain_device.lldd_dev is NULL as soon as we start the process of stopping a device. Any code path that wants to safely lookup a remote device must do so through task->dev->lldd_dev (isci_lookup_device()). For in-flight references outside of scic_lock we need reference counting to ensure that the device is not recycled before we are done with it. Simplify device back references to just scic_sds_request.target_device which is now the only permissible internal reference that is maintained relative to the reference count. There were two occasions where we wanted new i/o's to be treated as SAS_TASK_UNDELIVERED but where the domain_dev->lldd_dev link is still intact. Introduce a 'gone' flag to prevent i/o while waiting for libsas to take action on the port down event. One 'core' leftover is that we currently call scic_remote_device_destruct() from isci_remote_device_deconstruct() which is called when the 'core' says the device is stopped. It would be more natural for the final put to trigger isci_remote_device_deconstruct() but this implementation is deferred as it requires other changes. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index ae9edae..40f35fa 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1327,8 +1327,8 @@ void isci_host_deinit(struct isci_host *ihost) struct isci_remote_device *idev, *d; list_for_each_entry_safe(idev, d, &iport->remote_dev_list, node) { - isci_remote_device_change_state(idev, isci_stopping); - isci_remote_device_stop(ihost, idev); + if (test_bit(IDEV_ALLOCATED, &idev->flags)) + isci_remote_device_stop(ihost, idev); } } diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index fb66e30da..5f4a4e3 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -321,8 +321,7 @@ static void isci_port_link_down(struct isci_host *isci_host, dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p\n", __func__, isci_device); - isci_remote_device_change_state(isci_device, - isci_stopping); + set_bit(IDEV_GONE, &isci_device->flags); } } isci_port_change_state(isci_port, isci_stopping); diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 45592ad..ab5f986 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -94,7 +94,7 @@ static void isci_remote_device_not_ready(struct isci_host *ihost, "%s: isci_device = %p\n", __func__, idev); if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) - isci_remote_device_change_state(idev, isci_stopping); + set_bit(IDEV_GONE, &idev->flags); else /* device ready is actually a "not ready for io" state. */ isci_remote_device_change_state(idev, isci_ready); @@ -449,8 +449,10 @@ static void scic_sds_remote_device_start_request(struct scic_sds_remote_device * /* cleanup requests that failed after starting on the port */ if (status != SCI_SUCCESS) scic_sds_port_complete_io(sci_port, sci_dev, sci_req); - else + else { + kref_get(&sci_dev_to_idev(sci_dev)->kref); scic_sds_remote_device_increment_request_count(sci_dev); + } } enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic, @@ -656,6 +658,8 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " "could not complete\n", __func__, sci_port, sci_dev, sci_req, status); + else + isci_put_device(sci_dev_to_idev(sci_dev)); return status; } @@ -860,23 +864,11 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ * here should go through isci_remote_device_nuke_requests. * If we hit this condition, we will need a way to complete * io requests in process */ - while (!list_empty(&idev->reqs_in_process)) { - - dev_err(&ihost->pdev->dev, - "%s: ** request list not empty! **\n", __func__); - BUG(); - } + BUG_ON(!list_empty(&idev->reqs_in_process)); scic_remote_device_destruct(&idev->sci); - idev->domain_dev->lldd_dev = NULL; - idev->domain_dev = NULL; - idev->isci_port = NULL; list_del_init(&idev->node); - - clear_bit(IDEV_START_PENDING, &idev->flags); - clear_bit(IDEV_STOP_PENDING, &idev->flags); - clear_bit(IDEV_EH, &idev->flags); - wake_up(&ihost->eventq); + isci_put_device(idev); } /** @@ -1314,6 +1306,22 @@ isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) return idev; } +void isci_remote_device_release(struct kref *kref) +{ + struct isci_remote_device *idev = container_of(kref, typeof(*idev), kref); + struct isci_host *ihost = idev->isci_port->isci_host; + + idev->domain_dev = NULL; + idev->isci_port = NULL; + clear_bit(IDEV_START_PENDING, &idev->flags); + clear_bit(IDEV_STOP_PENDING, &idev->flags); + clear_bit(IDEV_GONE, &idev->flags); + clear_bit(IDEV_EH, &idev->flags); + smp_mb__before_clear_bit(); + clear_bit(IDEV_ALLOCATED, &idev->flags); + wake_up(&ihost->eventq); +} + /** * isci_remote_device_stop() - This function is called internally to stop the * remote device. @@ -1330,7 +1338,11 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, idev); + spin_lock_irqsave(&ihost->scic_lock, flags); + idev->domain_dev->lldd_dev = NULL; /* disable new lookups */ + set_bit(IDEV_GONE, &idev->flags); isci_remote_device_change_state(idev, isci_stopping); + spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Kill all outstanding requests. */ isci_remote_device_nuke_requests(ihost, idev); @@ -1342,14 +1354,10 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the stop complete callback. */ - if (status == SCI_SUCCESS) { + if (WARN_ONCE(status != SCI_SUCCESS, "failed to stop device\n")) + /* nothing to wait for */; + else wait_for_device_stop(ihost, idev); - clear_bit(IDEV_ALLOCATED, &idev->flags); - } - - dev_dbg(&ihost->pdev->dev, - "%s: idev = %p - after completion wait\n", - __func__, idev); return status; } @@ -1416,39 +1424,33 @@ int isci_remote_device_found(struct domain_device *domain_dev) if (!isci_device) return -ENODEV; + kref_init(&isci_device->kref); INIT_LIST_HEAD(&isci_device->node); - domain_dev->lldd_dev = isci_device; + + spin_lock_irq(&isci_host->scic_lock); isci_device->domain_dev = domain_dev; isci_device->isci_port = isci_port; isci_remote_device_change_state(isci_device, isci_starting); - - - spin_lock_irq(&isci_host->scic_lock); list_add_tail(&isci_device->node, &isci_port->remote_dev_list); set_bit(IDEV_START_PENDING, &isci_device->flags); status = isci_remote_device_construct(isci_port, isci_device); - spin_unlock_irq(&isci_host->scic_lock); dev_dbg(&isci_host->pdev->dev, "%s: isci_device = %p\n", __func__, isci_device); - if (status != SCI_SUCCESS) { - - spin_lock_irq(&isci_host->scic_lock); - isci_remote_device_deconstruct( - isci_host, - isci_device - ); - spin_unlock_irq(&isci_host->scic_lock); - return -ENODEV; - } + if (status == SCI_SUCCESS) { + /* device came up, advertise it to the world */ + domain_dev->lldd_dev = isci_device; + } else + isci_put_device(isci_device); + spin_unlock_irq(&isci_host->scic_lock); /* wait for the device ready callback. */ wait_for_device_start(isci_host, isci_device); - return 0; + return status == SCI_SUCCESS ? 0 : -ENODEV; } /** * isci_device_is_reset_pending() - This function will check if there is any diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 2b6a5bb..05842b5 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -56,6 +56,7 @@ #ifndef _ISCI_REMOTE_DEVICE_H_ #define _ISCI_REMOTE_DEVICE_H_ #include +#include #include "scu_remote_node_context.h" #include "remote_node_context.h" #include "port.h" @@ -134,7 +135,9 @@ struct isci_remote_device { #define IDEV_STOP_PENDING 1 #define IDEV_ALLOCATED 2 #define IDEV_EH 3 + #define IDEV_GONE 4 unsigned long flags; + struct kref kref; struct isci_port *isci_port; struct domain_device *domain_dev; struct list_head node; @@ -145,6 +148,26 @@ struct isci_remote_device { #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 +/* device reference routines must be called under scic_lock */ +static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev) +{ + struct isci_remote_device *idev = dev->lldd_dev; + + if (idev && !test_bit(IDEV_GONE, &idev->flags)) { + kref_get(&idev->kref); + return idev; + } + + return NULL; +} + +void isci_remote_device_release(struct kref *kref); +static inline void isci_put_device(struct isci_remote_device *idev) +{ + if (idev) + kref_put(&idev->kref, isci_remote_device_release); +} + enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev); void isci_remote_device_nuke_requests(struct isci_host *ihost, diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index f0813d0..fd6314a 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2313,7 +2313,7 @@ static void isci_request_set_open_reject_status( * none. */ static void isci_request_handle_controller_specific_errors( - struct isci_remote_device *isci_device, + struct isci_remote_device *idev, struct isci_request *request, struct sas_task *task, enum service_response *response_ptr, @@ -2353,8 +2353,7 @@ static void isci_request_handle_controller_specific_errors( * that we ignore the quiesce state, since we are * concerned about the actual device state. */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) + if (!idev) *status_ptr = SAS_DEVICE_UNKNOWN; else *status_ptr = SAS_ABORTED_TASK; @@ -2367,8 +2366,7 @@ static void isci_request_handle_controller_specific_errors( /* Task in the target is not done. */ *response_ptr = SAS_TASK_UNDELIVERED; - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) + if (!idev) *status_ptr = SAS_DEVICE_UNKNOWN; else *status_ptr = SAM_STAT_TASK_ABORTED; @@ -2399,8 +2397,7 @@ static void isci_request_handle_controller_specific_errors( * that we ignore the quiesce state, since we are * concerned about the actual device state. */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) + if (!idev) *status_ptr = SAS_DEVICE_UNKNOWN; else *status_ptr = SAS_ABORTED_TASK; @@ -2629,7 +2626,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, struct ssp_response_iu *resp_iu; void *resp_buf; unsigned long task_flags; - struct isci_remote_device *isci_device = request->isci_device; + struct isci_remote_device *idev = isci_lookup_device(task->dev); enum service_response response = SAS_TASK_UNDELIVERED; enum exec_status status = SAS_ABORTED_TASK; enum isci_request_status request_status; @@ -2672,9 +2669,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * that we ignore the quiesce state, since we are * concerned about the actual device state. */ - if ((isci_device->status == isci_stopping) - || (isci_device->status == isci_stopped) - ) + if (!idev) status = SAS_DEVICE_UNKNOWN; else status = SAS_ABORTED_TASK; @@ -2697,8 +2692,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, request->complete_in_target = true; response = SAS_TASK_UNDELIVERED; - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) + if (!idev) /* The device has been /is being stopped. Note that * we ignore the quiesce state, since we are * concerned about the actual device state. @@ -2728,8 +2722,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * that we ignore the quiesce state, since we are * concerned about the actual device state. */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) + if (!idev) status = SAS_DEVICE_UNKNOWN; else status = SAS_ABORTED_TASK; @@ -2861,8 +2854,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * that we ignore the quiesce state, since we are * concerned about the actual device state. */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) + if (!idev) status = SAS_DEVICE_UNKNOWN; else status = SAS_ABORTED_TASK; @@ -2873,7 +2865,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: isci_request_handle_controller_specific_errors( - isci_device, request, task, &response, &status, + idev, request, task, &response, &status, &complete_to_host); break; @@ -2902,8 +2894,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, /* Fail the I/O so it can be retried. */ response = SAS_TASK_UNDELIVERED; - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) + if (!idev) status = SAS_DEVICE_UNKNOWN; else status = SAS_ABORTED_TASK; @@ -2926,8 +2917,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * that we ignore the quiesce state, since we are * concerned about the actual device state. */ - if ((isci_device->status == isci_stopping) || - (isci_device->status == isci_stopped)) + if (!idev) status = SAS_DEVICE_UNKNOWN; else status = SAS_ABORTED_TASK; @@ -2953,8 +2943,10 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, /* complete the io request to the core. */ scic_controller_complete_io(&isci_host->sci, - &isci_device->sci, + request->sci.target_device, &request->sci); + isci_put_device(idev); + /* set terminated handle so it cannot be completed or * terminated again, and to cause any calls into abort * task to recognize the already completed case. @@ -3511,7 +3503,6 @@ static enum sci_status isci_io_request_build( } static struct isci_request *isci_request_alloc_core(struct isci_host *ihost, - struct isci_remote_device *idev, gfp_t gfp_flags) { dma_addr_t handle; @@ -3528,7 +3519,6 @@ static struct isci_request *isci_request_alloc_core(struct isci_host *ihost, spin_lock_init(&ireq->state_lock); ireq->request_daddr = handle; ireq->isci_host = ihost; - ireq->isci_device = idev; ireq->io_request_completion = NULL; ireq->terminated = false; @@ -3546,12 +3536,11 @@ static struct isci_request *isci_request_alloc_core(struct isci_host *ihost, static struct isci_request *isci_request_alloc_io(struct isci_host *ihost, struct sas_task *task, - struct isci_remote_device *idev, gfp_t gfp_flags) { struct isci_request *ireq; - ireq = isci_request_alloc_core(ihost, idev, gfp_flags); + ireq = isci_request_alloc_core(ihost, gfp_flags); if (ireq) { ireq->ttype_ptr.io_task_ptr = task; ireq->ttype = io_task; @@ -3562,12 +3551,11 @@ static struct isci_request *isci_request_alloc_io(struct isci_host *ihost, struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, struct isci_tmf *isci_tmf, - struct isci_remote_device *idev, gfp_t gfp_flags) { struct isci_request *ireq; - ireq = isci_request_alloc_core(ihost, idev, gfp_flags); + ireq = isci_request_alloc_core(ihost, gfp_flags); if (ireq) { ireq->ttype_ptr.tmf_task_ptr = isci_tmf; ireq->ttype = tmf_task; @@ -3575,21 +3563,16 @@ struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, return ireq; } -int isci_request_execute(struct isci_host *ihost, struct sas_task *task, - gfp_t gfp_flags) +int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, + struct sas_task *task, gfp_t gfp_flags) { enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; - struct scic_sds_remote_device *sci_dev; - struct isci_remote_device *idev; struct isci_request *ireq; unsigned long flags; int ret = 0; - idev = task->dev->lldd_dev; - sci_dev = &idev->sci; - /* do common allocation and init of request object. */ - ireq = isci_request_alloc_io(ihost, task, idev, gfp_flags); + ireq = isci_request_alloc_io(ihost, task, gfp_flags); if (!ireq) goto out; @@ -3605,8 +3588,7 @@ int isci_request_execute(struct isci_host *ihost, struct sas_task *task, spin_lock_irqsave(&ihost->scic_lock, flags); /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io(&ihost->sci, sci_dev, - &ireq->sci, + status = scic_controller_start_io(&ihost->sci, &idev->sci, &ireq->sci, SCI_CONTROLLER_INVALID_IO_TAG); if (status != SCI_SUCCESS && status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 8de2542..9bb7c36 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -285,7 +285,6 @@ struct isci_request { struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */ } ttype_ptr; struct isci_host *isci_host; - struct isci_remote_device *isci_device; /* For use in the requests_to_{complete|abort} lists: */ struct list_head completed_node; /* For use in the reqs_in_process list: */ @@ -681,12 +680,10 @@ static inline void isci_request_free(struct isci_host *isci_host, struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, struct isci_tmf *isci_tmf, - struct isci_remote_device *idev, gfp_t gfp_flags); -int isci_request_execute(struct isci_host *isci_host, - struct sas_task *task, - gfp_t gfp_flags); +int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, + struct sas_task *task, gfp_t gfp_flags); /** * isci_request_unmap_sgl() - This function unmaps the DMA address of a given diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index b9b9271..e7ce469 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -213,11 +213,10 @@ int isci_task_send_lu_reset_sata( /* Send the soft reset to the target */ #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ - isci_task_build_tmf(&tmf, isci_device, isci_tmf_sata_srst_high, - NULL, NULL - ); + isci_task_build_tmf(&tmf, isci_tmf_sata_srst_high, NULL, NULL); - ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_SRST_TIMEOUT_MS); + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, + ISCI_SRST_TIMEOUT_MS); if (ret != TMF_RESP_FUNC_COMPLETE) { dev_warn(&isci_host->pdev->dev, diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index ded81cd..dd5e9de 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -146,7 +146,7 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) { struct isci_host *ihost = dev_to_ihost(task->dev); - struct isci_remote_device *device; + struct isci_remote_device *idev; unsigned long flags; int ret; enum sci_status status; @@ -166,11 +166,12 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) dev_dbg(&ihost->pdev->dev, "task = %p, num = %d; dev = %p; cmd = %p\n", task, num, task->dev, task->uldd_task); + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(task->dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); - device = task->dev->lldd_dev; - - if (device) - device_status = device->status; + if (idev) + device_status = idev->status; else device_status = isci_freed; @@ -188,7 +189,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) __func__, task, isci_host_get_state(ihost), - device, + idev, device_status); if (device_status == isci_ready) { @@ -225,7 +226,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) spin_unlock_irqrestore(&task->task_state_lock, flags); /* build and send the request. */ - status = isci_request_execute(ihost, task, gfp_flags); + status = isci_request_execute(ihost, idev, task, gfp_flags); if (status != SCI_SUCCESS) { @@ -248,33 +249,31 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) } } } + isci_put_device(idev); } return 0; } static struct isci_request *isci_task_request_build(struct isci_host *ihost, + struct isci_remote_device *idev, struct isci_tmf *isci_tmf) { - struct scic_sds_remote_device *sci_dev; enum sci_status status = SCI_FAILURE; struct isci_request *ireq = NULL; - struct isci_remote_device *idev; struct domain_device *dev; dev_dbg(&ihost->pdev->dev, "%s: isci_tmf = %p\n", __func__, isci_tmf); - idev = isci_tmf->device; - sci_dev = &idev->sci; dev = idev->domain_dev; /* do common allocation and init of request object. */ - ireq = isci_request_alloc_tmf(ihost, isci_tmf, idev, GFP_ATOMIC); + ireq = isci_request_alloc_tmf(ihost, isci_tmf, GFP_ATOMIC); if (!ireq) return NULL; /* let the core do it's construct. */ - status = scic_task_request_construct(&ihost->sci, sci_dev, + status = scic_task_request_construct(&ihost->sci, &idev->sci, SCI_CONTROLLER_INVALID_IO_TAG, &ireq->sci); @@ -309,25 +308,13 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return ireq; } -/** - * isci_task_execute_tmf() - This function builds and sends a task request, - * then waits for the completion. - * @isci_host: This parameter specifies the ISCI host object - * @tmf: This parameter is the pointer to the task management structure for - * this request. - * @timeout_ms: This parameter specifies the timeout period for the task - * management request. - * - * TMF_RESP_FUNC_COMPLETE on successful completion of the TMF (this includes - * error conditions reported in the IU status), or TMF_RESP_FUNC_FAILED. - */ -int isci_task_execute_tmf(struct isci_host *ihost, struct isci_tmf *tmf, - unsigned long timeout_ms) +int isci_task_execute_tmf(struct isci_host *ihost, + struct isci_remote_device *isci_device, + struct isci_tmf *tmf, unsigned long timeout_ms) { DECLARE_COMPLETION_ONSTACK(completion); enum sci_task_status status = SCI_TASK_FAILURE; struct scic_sds_remote_device *sci_device; - struct isci_remote_device *isci_device = tmf->device; struct isci_request *ireq; int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; @@ -352,7 +339,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, struct isci_tmf *tmf, /* Assign the pointer to the TMF's completion kernel wait structure. */ tmf->complete = &completion; - ireq = isci_task_request_build(ihost, tmf); + ireq = isci_task_request_build(ihost, isci_device, tmf); if (!ireq) { dev_warn(&ihost->pdev->dev, "%s: isci_task_request_build failed\n", @@ -399,10 +386,9 @@ int isci_task_execute_tmf(struct isci_host *ihost, struct isci_tmf *tmf, if (tmf->cb_state_func != NULL) tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); - status = scic_controller_terminate_request( - &ireq->isci_host->sci, - &ireq->isci_device->sci, - &ireq->sci); + status = scic_controller_terminate_request(&ihost->sci, + &isci_device->sci, + &ireq->sci); spin_unlock_irqrestore(&ihost->scic_lock, flags); } @@ -437,65 +423,32 @@ int isci_task_execute_tmf(struct isci_host *ihost, struct isci_tmf *tmf, void isci_task_build_tmf( struct isci_tmf *tmf, - struct isci_remote_device *isci_device, enum isci_tmf_function_codes code, void (*tmf_sent_cb)(enum isci_tmf_cb_state, struct isci_tmf *, void *), void *cb_data) { - dev_dbg(&isci_device->isci_port->isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); - memset(tmf, 0, sizeof(*tmf)); - tmf->device = isci_device; tmf->tmf_code = code; - tmf->cb_state_func = tmf_sent_cb; tmf->cb_data = cb_data; } static void isci_task_build_abort_task_tmf( struct isci_tmf *tmf, - struct isci_remote_device *isci_device, enum isci_tmf_function_codes code, void (*tmf_sent_cb)(enum isci_tmf_cb_state, struct isci_tmf *, void *), struct isci_request *old_request) { - isci_task_build_tmf(tmf, isci_device, code, tmf_sent_cb, + isci_task_build_tmf(tmf, code, tmf_sent_cb, (void *)old_request); tmf->io_tag = old_request->io_tag; } -static struct isci_request *isci_task_get_request_from_task( - struct sas_task *task, - struct isci_remote_device **isci_device) -{ - - struct isci_request *request = NULL; - unsigned long flags; - - spin_lock_irqsave(&task->task_state_lock, flags); - - request = task->lldd_task; - - /* If task is already done, the request isn't valid */ - if (!(task->task_state_flags & SAS_TASK_STATE_DONE) && - (task->task_state_flags & SAS_TASK_AT_INITIATOR) && - (request != NULL)) { - - if (isci_device != NULL) - *isci_device = request->isci_device; - } - - spin_unlock_irqrestore(&task->task_state_lock, flags); - - return request; -} - /** * isci_task_validate_request_to_abort() - This function checks the given I/O * against the "started" state. If the request is still "started", it's @@ -858,11 +811,10 @@ static int isci_task_send_lu_reset_sas( * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED"). */ - isci_task_build_tmf(&tmf, isci_device, isci_tmf_ssp_lun_reset, NULL, - NULL); + isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset, NULL, NULL); #define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */ - ret = isci_task_execute_tmf(isci_host, &tmf, ISCI_LU_RESET_TIMEOUT_MS); + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS); if (ret == TMF_RESP_FUNC_COMPLETE) dev_dbg(&isci_host->pdev->dev, @@ -888,33 +840,33 @@ static int isci_task_send_lu_reset_sas( int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) { struct isci_host *isci_host = dev_to_ihost(domain_device); - struct isci_remote_device *isci_device = NULL; + struct isci_remote_device *isci_device; + unsigned long flags; int ret; - bool device_stopping = false; - isci_device = domain_device->lldd_dev; + spin_lock_irqsave(&isci_host->scic_lock, flags); + isci_device = isci_lookup_device(domain_device); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); dev_dbg(&isci_host->pdev->dev, "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", __func__, domain_device, isci_host, isci_device); - if (isci_device != NULL) { - device_stopping = (isci_device->status == isci_stopping) - || (isci_device->status == isci_stopped); + if (isci_device) set_bit(IDEV_EH, &isci_device->flags); - } /* If there is a device reset pending on any request in the * device's list, fail this LUN reset request in order to * escalate to the device reset. */ - if (!isci_device || device_stopping || + if (!isci_device || isci_device_is_reset_pending(isci_host, isci_device)) { dev_warn(&isci_host->pdev->dev, "%s: No dev (%p), or " "RESET PENDING: domain_device=%p\n", __func__, isci_device, domain_device); - return TMF_RESP_FUNC_FAILED; + ret = TMF_RESP_FUNC_FAILED; + goto out; } /* Send the task management part of the reset. */ @@ -929,6 +881,8 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) isci_terminate_pending_requests(isci_host, isci_device); + out: + isci_put_device(isci_device); return ret; } @@ -1023,60 +977,54 @@ int isci_task_abort_task(struct sas_task *task) int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; bool any_dev_reset = false; - bool device_stopping; /* Get the isci_request reference from the task. Note that * this check does not depend on the pending request list * in the device, because tasks driving resets may land here * after completion in the core. */ - old_request = isci_task_get_request_from_task(task, &isci_device); + spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock(&task->task_state_lock); + + old_request = task->lldd_task; + + /* If task is already done, the request isn't valid */ + if (!(task->task_state_flags & SAS_TASK_STATE_DONE) && + (task->task_state_flags & SAS_TASK_AT_INITIATOR) && + old_request) + isci_device = isci_lookup_device(task->dev); + + spin_unlock(&task->task_state_lock); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); dev_dbg(&isci_host->pdev->dev, "%s: task = %p\n", __func__, task); - /* Check if the device has been / is currently being removed. - * If so, no task management will be done, and the I/O will - * be terminated. - */ - device_stopping = (isci_device->status == isci_stopping) - || (isci_device->status == isci_stopped); + if (!isci_device || !old_request) + goto out; - /* XXX need to fix device lookup lifetime (needs to be done - * under scic_lock, among other things...), but for now assume - * the device is available like the above code - */ set_bit(IDEV_EH, &isci_device->flags); /* This version of the driver will fail abort requests for * SATA/STP. Failing the abort request this way will cause the * SCSI error handler thread to escalate to LUN reset */ - if (sas_protocol_ata(task->task_proto) && !device_stopping) { + if (sas_protocol_ata(task->task_proto)) { dev_warn(&isci_host->pdev->dev, " task %p is for a STP/SATA device;" " returning TMF_RESP_FUNC_FAILED\n" " to cause a LUN reset...\n", task); - return TMF_RESP_FUNC_FAILED; + goto out; } dev_dbg(&isci_host->pdev->dev, "%s: old_request == %p\n", __func__, old_request); - if (!device_stopping) - any_dev_reset = isci_device_is_reset_pending(isci_host,isci_device); + any_dev_reset = isci_device_is_reset_pending(isci_host,isci_device); spin_lock_irqsave(&task->task_state_lock, flags); - /* Don't do resets to stopping devices. */ - if (device_stopping) { - - task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; - any_dev_reset = false; - - } else /* See if there is a pending device reset for this device. */ - any_dev_reset = any_dev_reset - || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET); + any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET); /* If the extraction of the request reference from the task * failed, then the request has been completed (or if there is a @@ -1130,8 +1078,7 @@ int isci_task_abort_task(struct sas_task *task) "%s: abort task not needed for %p\n", __func__, task); } - - return ret; + goto out; } else spin_unlock_irqrestore(&task->task_state_lock, flags); @@ -1158,11 +1105,10 @@ int isci_task_abort_task(struct sas_task *task) "%s: device = %p; old_request %p already being aborted\n", __func__, isci_device, old_request); - - return TMF_RESP_FUNC_COMPLETE; + ret = TMF_RESP_FUNC_COMPLETE; + goto out; } if ((task->task_proto == SAS_PROTOCOL_SMP) - || device_stopping || old_request->complete_in_target ) { @@ -1170,10 +1116,9 @@ int isci_task_abort_task(struct sas_task *task) dev_dbg(&isci_host->pdev->dev, "%s: SMP request (%d)" - " or device is stopping (%d)" " or complete_in_target (%d), thus no TMF\n", __func__, (task->task_proto == SAS_PROTOCOL_SMP), - device_stopping, old_request->complete_in_target); + old_request->complete_in_target); /* Set the state on the task. */ isci_task_all_done(task); @@ -1185,15 +1130,14 @@ int isci_task_abort_task(struct sas_task *task) */ } else { /* Fill in the tmf stucture */ - isci_task_build_abort_task_tmf(&tmf, isci_device, - isci_tmf_ssp_task_abort, + isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort, isci_abort_task_process_cb, old_request); spin_unlock_irqrestore(&isci_host->scic_lock, flags); #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */ - ret = isci_task_execute_tmf(isci_host, &tmf, + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_ABORT_TASK_TIMEOUT_MS); if (ret != TMF_RESP_FUNC_COMPLETE) @@ -1212,6 +1156,8 @@ int isci_task_abort_task(struct sas_task *task) /* Make sure we do not leave a reference to aborted_io_completion */ old_request->io_request_completion = NULL; + out: + isci_put_device(isci_device); return ret; } @@ -1305,7 +1251,6 @@ isci_task_request_complete(struct isci_host *ihost, struct isci_request *ireq, enum sci_task_status completion_status) { - struct isci_remote_device *idev = ireq->isci_device; struct isci_tmf *tmf = isci_request_access_tmf(ireq); struct completion *tmf_complete; struct scic_sds_request *sci_req = &ireq->sci; @@ -1332,7 +1277,7 @@ isci_task_request_complete(struct isci_host *ihost, /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; - scic_controller_complete_io(&ihost->sci, &idev->sci, &ireq->sci); + scic_controller_complete_io(&ihost->sci, ireq->sci.target_device, &ireq->sci); /* set the 'terminated' flag handle to make sure it cannot be terminated * or completed again. */ @@ -1583,11 +1528,10 @@ static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__); } -static int isci_reset_device(struct domain_device *dev, int hard_reset) +static int isci_reset_device(struct isci_host *ihost, + struct isci_remote_device *idev, int hard_reset) { - struct isci_remote_device *idev = dev->lldd_dev; - struct sas_phy *phy = sas_find_local_phy(dev); - struct isci_host *ihost = dev_to_ihost(dev); + struct sas_phy *phy = sas_find_local_phy(idev->domain_dev); struct isci_port *iport = idev->isci_port; enum sci_status status; unsigned long flags; @@ -1595,14 +1539,6 @@ static int isci_reset_device(struct domain_device *dev, int hard_reset) dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); - if (!idev) { - dev_warn(&ihost->pdev->dev, - "%s: idev is GONE!\n", - __func__); - - return TMF_RESP_FUNC_COMPLETE; /* Nothing to reset. */ - } - spin_lock_irqsave(&ihost->scic_lock, flags); status = scic_remote_device_reset(&idev->sci); if (status != SCI_SUCCESS) { @@ -1662,35 +1598,50 @@ static int isci_reset_device(struct domain_device *dev, int hard_reset) int isci_task_I_T_nexus_reset(struct domain_device *dev) { struct isci_host *ihost = dev_to_ihost(dev); - int ret = TMF_RESP_FUNC_FAILED, hard_reset = 1; struct isci_remote_device *idev; + int ret, hard_reset = 1; unsigned long flags; - /* XXX mvsas is not protecting against ->lldd_dev_gone(), are we - * being too paranoid, or is mvsas busted?! - */ spin_lock_irqsave(&ihost->scic_lock, flags); - idev = dev->lldd_dev; - if (!idev || !test_bit(IDEV_EH, &idev->flags)) - ret = TMF_RESP_FUNC_COMPLETE; + idev = isci_lookup_device(dev); spin_unlock_irqrestore(&ihost->scic_lock, flags); - if (ret == TMF_RESP_FUNC_COMPLETE) - return ret; + if (!idev || !test_bit(IDEV_EH, &idev->flags)) { + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) hard_reset = 0; - return isci_reset_device(dev, hard_reset); + ret = isci_reset_device(ihost, idev, hard_reset); + out: + isci_put_device(idev); + return ret; } int isci_bus_reset_handler(struct scsi_cmnd *cmd) { struct domain_device *dev = sdev_to_domain_dev(cmd->device); - int hard_reset = 1; + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev; + int ret, hard_reset = 1; + unsigned long flags; if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) hard_reset = 0; - return isci_reset_device(dev, hard_reset); + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (!idev) { + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + + ret = isci_reset_device(ihost, idev, hard_reset); + out: + isci_put_device(idev); + return ret; } diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index d574a18..42019de 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -213,18 +213,15 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd); void isci_task_build_tmf( struct isci_tmf *tmf, - struct isci_remote_device *isci_device, enum isci_tmf_function_codes code, void (*tmf_sent_cb)(enum isci_tmf_cb_state, struct isci_tmf *, void *), void *cb_data); - -int isci_task_execute_tmf( - struct isci_host *isci_host, - struct isci_tmf *tmf, - unsigned long timeout_ms); +int isci_task_execute_tmf(struct isci_host *isci_host, + struct isci_remote_device *idev, + struct isci_tmf *tmf, unsigned long timeout_ms); /** * enum isci_completion_selection - This enum defines the possible actions to -- cgit v0.10.2 From f2088267514b39af1a94409168101527769a911c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 16 Jun 2011 11:26:12 -0700 Subject: isci: kill isci_remote_device_change_state() Now that "stopping/stopped" are one in the same and signalled by a NULL device pointer the rest of the device status infrastructure can be removed (->status and ->state_lock). The "not ready for i/o state" is replaced with a state flag, and is evaluated under scic_lock so that we don't see transients from taking the device reference to submitting the i/o. This also fixes a potential leakage of can_queue slots in the rare case that SAS_TASK_ABORTED is set at submission. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 40f35fa..b08455f 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -2504,7 +2504,6 @@ int isci_host_init(struct isci_host *isci_host) INIT_LIST_HEAD(&idev->reqs_in_process); INIT_LIST_HEAD(&idev->node); - spin_lock_init(&idev->state_lock); } return 0; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index ab5f986..c2e5c05 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -62,24 +62,6 @@ #include "task.h" /** - * isci_remote_device_change_state() - This function gets the status of the - * remote_device object. - * @isci_device: This parameter points to the isci_remote_device object - * - * status of the object as a isci_status enum. - */ -void isci_remote_device_change_state( - struct isci_remote_device *isci_device, - enum isci_status status) -{ - unsigned long flags; - - spin_lock_irqsave(&isci_device->state_lock, flags); - isci_device->status = status; - spin_unlock_irqrestore(&isci_device->state_lock, flags); -} - -/** * isci_remote_device_not_ready() - This function is called by the scic when * the remote device is not ready. We mark the isci device as ready (not * "ready_for_io") and signal the waiting proccess. @@ -96,8 +78,7 @@ static void isci_remote_device_not_ready(struct isci_host *ihost, if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) set_bit(IDEV_GONE, &idev->flags); else - /* device ready is actually a "not ready for io" state. */ - isci_remote_device_change_state(idev, isci_ready); + clear_bit(IDEV_IO_READY, &idev->flags); } /** @@ -113,7 +94,7 @@ static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote dev_dbg(&ihost->pdev->dev, "%s: idev = %p\n", __func__, idev); - isci_remote_device_change_state(idev, isci_ready_for_io); + set_bit(IDEV_IO_READY, &idev->flags); if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) wake_up(&ihost->eventq); } @@ -871,26 +852,6 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ isci_put_device(idev); } -/** - * isci_remote_device_stop_complete() - This function is called by the scic - * when the remote device stop has completed. We mark the isci device as not - * ready and remove the isci remote device. - * @ihost: This parameter specifies the isci host object. - * @idev: This parameter specifies the remote device. - * @status: This parameter specifies status of the completion. - * - */ -static void isci_remote_device_stop_complete(struct isci_host *ihost, - struct isci_remote_device *idev) -{ - dev_dbg(&ihost->pdev->dev, "%s: complete idev = %p\n", __func__, idev); - - isci_remote_device_change_state(idev, isci_stopped); - - /* after stop, we can tear down resources. */ - isci_remote_device_deconstruct(ihost, idev); -} - static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) { struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); @@ -903,7 +864,7 @@ static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_mac */ prev_state = sci_dev->sm.previous_state_id; if (prev_state == SCI_DEV_STOPPING) - isci_remote_device_stop_complete(scic_to_ihost(scic), idev); + isci_remote_device_deconstruct(scic_to_ihost(scic), idev); scic_sds_controller_remote_device_stopped(scic, sci_dev); } @@ -1301,8 +1262,6 @@ isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) if (WARN_ONCE(!list_empty(&idev->node), "found non-idle remote device\n")) return NULL; - isci_remote_device_change_state(idev, isci_freed); - return idev; } @@ -1315,6 +1274,7 @@ void isci_remote_device_release(struct kref *kref) idev->isci_port = NULL; clear_bit(IDEV_START_PENDING, &idev->flags); clear_bit(IDEV_STOP_PENDING, &idev->flags); + clear_bit(IDEV_IO_READY, &idev->flags); clear_bit(IDEV_GONE, &idev->flags); clear_bit(IDEV_EH, &idev->flags); smp_mb__before_clear_bit(); @@ -1341,7 +1301,6 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem spin_lock_irqsave(&ihost->scic_lock, flags); idev->domain_dev->lldd_dev = NULL; /* disable new lookups */ set_bit(IDEV_GONE, &idev->flags); - isci_remote_device_change_state(idev, isci_stopping); spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Kill all outstanding requests. */ @@ -1430,7 +1389,6 @@ int isci_remote_device_found(struct domain_device *domain_dev) spin_lock_irq(&isci_host->scic_lock); isci_device->domain_dev = domain_dev; isci_device->isci_port = isci_port; - isci_remote_device_change_state(isci_device, isci_starting); list_add_tail(&isci_device->node, &isci_port->remote_dev_list); set_bit(IDEV_START_PENDING, &isci_device->flags); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 05842b5..33f0114 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -130,19 +130,18 @@ struct scic_sds_remote_device { }; struct isci_remote_device { - enum isci_status status; #define IDEV_START_PENDING 0 #define IDEV_STOP_PENDING 1 #define IDEV_ALLOCATED 2 #define IDEV_EH 3 #define IDEV_GONE 4 + #define IDEV_IO_READY 5 unsigned long flags; struct kref kref; struct isci_port *isci_port; struct domain_device *domain_dev; struct list_head node; struct list_head reqs_in_process; - spinlock_t state_lock; struct scic_sds_remote_device sci; }; @@ -178,8 +177,6 @@ bool isci_device_is_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev); void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev); -void isci_remote_device_change_state(struct isci_remote_device *idev, - enum isci_status status); /** * scic_remote_device_stop() - This method will stop both transmission and * reception of link activity for the supplied remote device. This method diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index dd5e9de..c313bc1 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -147,10 +147,10 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) { struct isci_host *ihost = dev_to_ihost(task->dev); struct isci_remote_device *idev; + enum sci_status status; unsigned long flags; + bool io_ready; int ret; - enum sci_status status; - enum isci_status device_status; dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num); @@ -163,64 +163,40 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) } for_each_sas_task(num, task) { - dev_dbg(&ihost->pdev->dev, - "task = %p, num = %d; dev = %p; cmd = %p\n", - task, num, task->dev, task->uldd_task); spin_lock_irqsave(&ihost->scic_lock, flags); idev = isci_lookup_device(task->dev); + io_ready = idev ? test_bit(IDEV_IO_READY, &idev->flags) : 0; spin_unlock_irqrestore(&ihost->scic_lock, flags); - if (idev) - device_status = idev->status; - else - device_status = isci_freed; - - /* From this point onward, any process that needs to guarantee - * that there is no kernel I/O being started will have to wait - * for the quiesce spinlock. - */ - - if (device_status != isci_ready_for_io) { + dev_dbg(&ihost->pdev->dev, + "task: %p, num: %d dev: %p idev: %p:%#lx cmd = %p\n", + task, num, task->dev, idev, idev ? idev->flags : 0, + task->uldd_task); - /* Forces a retry from scsi mid layer. */ - dev_dbg(&ihost->pdev->dev, - "%s: task %p: isci_host->status = %d, " - "device = %p; device_status = 0x%x\n\n", - __func__, - task, - isci_host_get_state(ihost), - idev, - device_status); - - if (device_status == isci_ready) { - /* Indicate QUEUE_FULL so that the scsi midlayer - * retries. - */ - isci_task_refuse(ihost, task, - SAS_TASK_COMPLETE, - SAS_QUEUE_FULL); - } else { - /* Else, the device is going down. */ - isci_task_refuse(ihost, task, - SAS_TASK_UNDELIVERED, - SAS_DEVICE_UNKNOWN); - } + if (!idev) { + isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN); + isci_host_can_dequeue(ihost, 1); + } else if (!io_ready) { + /* Indicate QUEUE_FULL so that the scsi midlayer + * retries. + */ + isci_task_refuse(ihost, task, SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); isci_host_can_dequeue(ihost, 1); } else { /* There is a device and it's ready for I/O. */ spin_lock_irqsave(&task->task_state_lock, flags); if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { - + /* The I/O was aborted. */ spin_unlock_irqrestore(&task->task_state_lock, flags); isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED, SAM_STAT_TASK_ABORTED); - - /* The I/O was aborted. */ - + isci_host_can_dequeue(ihost, 1); } else { task->task_state_flags |= SAS_TASK_AT_INITIATOR; spin_unlock_irqrestore(&task->task_state_lock, flags); @@ -323,11 +299,11 @@ int isci_task_execute_tmf(struct isci_host *ihost, /* sanity check, return TMF_RESP_FUNC_FAILED * if the device is not there and ready. */ - if (!isci_device || isci_device->status != isci_ready_for_io) { + if (!isci_device || !test_bit(IDEV_IO_READY, &isci_device->flags)) { dev_dbg(&ihost->pdev->dev, - "%s: isci_device = %p not ready (%d)\n", + "%s: isci_device = %p not ready (%#lx)\n", __func__, - isci_device, isci_device->status); + isci_device, isci_device ? isci_device->flags : 0); return TMF_RESP_FUNC_FAILED; } else dev_dbg(&ihost->pdev->dev, -- cgit v0.10.2 From ff60639dc9a461883db9192d2da0674a00339f12 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 17 Jun 2011 13:34:43 -0700 Subject: isci: kill device_sequence Now that we have upleveled device reassignment protection to the isci_remote_device reference count we no longer need this level of self-defense. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 94fd54d..a54397e 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -188,15 +188,6 @@ struct scic_sds_controller { u8 io_request_sequence[SCI_MAX_IO_REQUESTS]; /** - * This field in the array of sequence values for the RNi. These are used - * to control io request build to io request start operations. The sequence - * value is recorded into an io request when it is built and is checked on - * the io request start operation to make sure that there was not a device - * hot plug between the build and start operation. - */ - u8 remote_device_sequence[SCI_MAX_REMOTE_DEVICES]; - - /** * This field is a pointer to the memory allocated by the driver for the task * context table. This data is shared between the hardware and software. */ diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index c2e5c05..9f45c2b 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -887,8 +887,6 @@ static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machi struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); struct domain_device *dev = idev->domain_dev; - scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; - if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { sci_change_state(&sci_dev->sm, SCI_STP_DEV_IDLE); } else if (dev_is_expander(dev)) { diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 33f0114..cde5950 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -411,17 +411,6 @@ static inline bool dev_is_expander(struct domain_device *dev) ((sci_dev)->owning_port) /** - * scic_sds_remote_device_get_sequence() - - * - * This macro returns the remote device sequence value - */ -#define scic_sds_remote_device_get_sequence(sci_dev) \ - (\ - scic_sds_remote_device_get_controller(sci_dev)-> \ - remote_device_sequence[(sci_dev)->rnc.remote_node_index] \ - ) - -/** * scic_sds_remote_device_get_controller_peg() - * * This macro returns the controllers protocol engine group diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index fd6314a..ebe160c 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -753,10 +753,6 @@ enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) struct scu_task_context *task_context; enum sci_base_request_states state; - if (sci_req->device_sequence != - scic_sds_remote_device_get_sequence(sci_req->target_device)) - return SCI_FAILURE; - state = sci_req->sm.current_state_id; if (state != SCI_REQ_CONSTRUCTED) { dev_warn(scic_to_dev(scic), @@ -3112,7 +3108,6 @@ scic_sds_general_request_construct(struct scic_sds_controller *scic, sci_req->target_device = sci_dev; sci_req->protocol = SCIC_NO_PROTOCOL; sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; - sci_req->device_sequence = scic_sds_remote_device_get_sequence(sci_dev); sci_req->sci_status = SCI_SUCCESS; sci_req->scu_status = 0; diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 9bb7c36..a91d1d6 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -231,14 +231,6 @@ struct scic_sds_request { */ u32 saved_rx_frame_index; - /* - * This field in the recorded device sequence for the io request. - * This is recorded during the build operation and is compared in the - * start operation. If the sequence is different then there was a - * change of devices from the build to start operations. - */ - u8 device_sequence; - union { struct { union { @@ -262,7 +254,6 @@ struct scic_sds_request { struct dev_to_host_fis rsp; } stp; }; - }; static inline struct scic_sds_request *to_sci_req(struct scic_sds_stp_request *stp_req) -- cgit v0.10.2 From 5edc33480c1c363ab361a881f2957b9fba5185cf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 16 Jun 2011 17:20:35 -0700 Subject: isci: fix smp response frame overrun Due to a typo we currently copy way too much when copying over the response data, but since a request is likely backed by a full page allocation we don't corrupt live data. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index ebe160c..f4fbca7 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -1694,7 +1694,7 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, frame_index, &smp_resp); - word_cnt = (sizeof(struct smp_req) - SMP_RESP_HDR_SZ) / + word_cnt = (sizeof(struct smp_resp) - SMP_RESP_HDR_SZ) / sizeof(u32); sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, -- cgit v0.10.2 From ddcc7e347a891937be65358b43f40b7f81185f8f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 17 Jun 2011 10:40:43 -0700 Subject: isci: fix dma_unmap_sg usage One bug and a cleanup: 1/ Fix cases where we were unmapping invalid addresses (smp requests were being unmapped) [ 604.662770] ------------[ cut here ]------------ [ 604.668026] WARNING: at lib/dma-debug.c:800 check_unmap+0x418/0x740() [ 604.675315] Hardware name: SandyBridge Platform [ 604.680465] isci 0000:03:00.0: DMA-API: device driver tries to free an invalid DMA memory address 2/ The unmap routine is too large to be an inline function, and isci_request_io_request_get_next_sge is unused. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index f4fbca7..3950849 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2930,7 +2930,22 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, break; } - isci_request_unmap_sgl(request, isci_host->pdev); + switch (task->task_proto) { + case SAS_PROTOCOL_SSP: + if (task->data_dir == DMA_NONE) + break; + if (task->num_scatter == 0) + /* 0 indicates a single dma address */ + dma_unmap_single(&isci_host->pdev->dev, + request->zero_scatter_daddr, + task->total_xfer_len, task->data_dir); + else /* unmap the sgl dma addresses */ + dma_unmap_sg(&isci_host->pdev->dev, task->scatter, + request->num_sg_entries, task->data_dir); + break; + default: + break; + } /* Put the completed request on the correct list */ isci_task_save_for_upper_layer_completion(isci_host, request, response, diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index a91d1d6..324fb7b 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -672,97 +672,10 @@ static inline void isci_request_free(struct isci_host *isci_host, struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, struct isci_tmf *isci_tmf, gfp_t gfp_flags); - int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, struct sas_task *task, gfp_t gfp_flags); - -/** - * isci_request_unmap_sgl() - This function unmaps the DMA address of a given - * sgl - * @request: This parameter points to the isci_request object - * @*pdev: This Parameter is the pci_device struct for the controller - * - */ -static inline void -isci_request_unmap_sgl(struct isci_request *request, struct pci_dev *pdev) -{ - struct sas_task *task = isci_request_access_task(request); - - dev_dbg(&request->isci_host->pdev->dev, - "%s: request = %p, task = %p,\n" - "task->data_dir = %d, is_sata = %d\n ", - __func__, - request, - task, - task->data_dir, - sas_protocol_ata(task->task_proto)); - - if ((task->data_dir != PCI_DMA_NONE) && - !sas_protocol_ata(task->task_proto)) { - if (task->num_scatter == 0) - /* 0 indicates a single dma address */ - dma_unmap_single( - &pdev->dev, - request->zero_scatter_daddr, - task->total_xfer_len, - task->data_dir - ); - - else /* unmap the sgl dma addresses */ - dma_unmap_sg( - &pdev->dev, - task->scatter, - request->num_sg_entries, - task->data_dir - ); - } -} - -/** - * isci_request_io_request_get_next_sge() - This function is called by the sci - * core to retrieve the next sge for a given request. - * @request: This parameter is the isci_request object. - * @current_sge_address: This parameter is the last sge retrieved by the sci - * core for this request. - * - * pointer to the next sge for specified request. - */ -static inline void * -isci_request_io_request_get_next_sge(struct isci_request *request, - void *current_sge_address) -{ - struct sas_task *task = isci_request_access_task(request); - void *ret = NULL; - - dev_dbg(&request->isci_host->pdev->dev, - "%s: request = %p, " - "current_sge_address = %p, " - "num_scatter = %d\n", - __func__, - request, - current_sge_address, - task->num_scatter); - - if (!current_sge_address) /* First time through.. */ - ret = task->scatter; /* always task->scatter */ - else if (task->num_scatter == 0) /* Next element, if num_scatter == 0 */ - ret = NULL; /* there is only one element. */ - else - ret = sg_next(current_sge_address); /* sg_next returns NULL - * for the last element - */ - - dev_dbg(&request->isci_host->pdev->dev, - "%s: next sge address = %p\n", - __func__, - ret); - - return ret; -} - -void -isci_terminate_pending_requests(struct isci_host *ihost, - struct isci_remote_device *idev); +void isci_terminate_pending_requests(struct isci_host *ihost, + struct isci_remote_device *idev); enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, -- cgit v0.10.2 From e9bf709564e90abea25ca7aeae8c3de5cc6468d7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 16 Jun 2011 16:59:56 -0700 Subject: isci: fix support for arbitrarily large smp requests Instead of duplicating the smp request buffer reuse the one provided by libsas. This future proofs the driver to support arbitrarily large smp requests, and shrinks the request structure size by ~700 bytes. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 3950849..1043fed 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2943,6 +2943,20 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, dma_unmap_sg(&isci_host->pdev->dev, task->scatter, request->num_sg_entries, task->data_dir); break; + case SAS_PROTOCOL_SMP: { + struct scatterlist *sg = &task->smp_task.smp_req; + struct smp_req *smp_req; + void *kaddr; + + dma_unmap_sg(&isci_host->pdev->dev, sg, 1, DMA_TO_DEVICE); + + /* need to swab it back in case the command buffer is re-used */ + kaddr = kmap_atomic(sg_page(sg), KM_IRQ0); + smp_req = kaddr + sg->offset; + sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32)); + kunmap_atomic(kaddr, KM_IRQ0); + break; + } default: break; } @@ -3160,7 +3174,7 @@ scic_io_request_construct(struct scic_sds_controller *scic, else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd)); else if (dev_is_expander(dev)) - memset(&sci_req->smp.cmd, 0, sizeof(sci_req->smp.cmd)); + /* pass */; else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; @@ -3236,30 +3250,54 @@ static enum sci_status isci_request_stp_request_construct( return status; } -/* - * This function will fill in the SCU Task Context for a SMP request. The - * following important settings are utilized: -# task_type == - * SCU_TASK_TYPE_SMP. This simply indicates that a normal request type - * (i.e. non-raw frame) is being utilized to perform task management. -# - * control_frame == 1. This ensures that the proper endianess is set so - * that the bytes are transmitted in the right order for a smp request frame. - * @sci_req: This parameter specifies the smp request object being - * constructed. - * - */ -static void -scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, - ssize_t req_len) +static enum sci_status +scic_io_request_construct_smp(struct device *dev, + struct scic_sds_request *sci_req, + struct sas_task *task) { - dma_addr_t dma_addr; + struct scatterlist *sg = &task->smp_task.smp_req; struct scic_sds_remote_device *sci_dev; - struct scic_sds_port *sci_port; struct scu_task_context *task_context; - ssize_t word_cnt = sizeof(struct smp_req) / sizeof(u32); + struct scic_sds_port *sci_port; + struct smp_req *smp_req; + void *kaddr; + u8 req_len; + u32 cmd; + + kaddr = kmap_atomic(sg_page(sg), KM_IRQ0); + smp_req = kaddr + sg->offset; + /* + * Look at the SMP requests' header fields; for certain SAS 1.x SMP + * functions under SAS 2.0, a zero request length really indicates + * a non-zero default length. + */ + if (smp_req->req_len == 0) { + switch (smp_req->func) { + case SMP_DISCOVER: + case SMP_REPORT_PHY_ERR_LOG: + case SMP_REPORT_PHY_SATA: + case SMP_REPORT_ROUTE_INFO: + smp_req->req_len = 2; + break; + case SMP_CONF_ROUTE_INFO: + case SMP_PHY_CONTROL: + case SMP_PHY_TEST_FUNCTION: + smp_req->req_len = 9; + break; + /* Default - zero is a valid default for 2.0. */ + } + } + req_len = smp_req->req_len; + sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32)); + cmd = *(u32 *) smp_req; + kunmap_atomic(kaddr, KM_IRQ0); + + if (!dma_map_sg(dev, sg, 1, DMA_TO_DEVICE)) + return SCI_FAILURE; + + sci_req->protocol = SCIC_SMP_PROTOCOL; /* byte swap the smp request. */ - sci_swab32_cpy(&sci_req->smp.cmd, &sci_req->smp.cmd, - word_cnt); task_context = scic_sds_request_get_task_context(sci_req); @@ -3307,7 +3345,7 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, * 18h ~ 30h, protocol specific * since commandIU has been build by framework at this point, we just * copy the frist DWord from command IU to this location. */ - memcpy(&task_context->type.smp, &sci_req->smp.cmd, sizeof(u32)); + memcpy(&task_context->type.smp, &cmd, sizeof(u32)); /* * 40h @@ -3347,48 +3385,12 @@ scu_smp_request_construct_task_context(struct scic_sds_request *sci_req, * Copy the physical address for the command buffer to the SCU Task * Context command buffer should not contain command header. */ - dma_addr = scic_io_request_get_dma_addr(sci_req, - ((char *) &sci_req->smp.cmd) + - sizeof(u32)); - - task_context->command_iu_upper = upper_32_bits(dma_addr); - task_context->command_iu_lower = lower_32_bits(dma_addr); + task_context->command_iu_upper = upper_32_bits(sg_dma_address(sg)); + task_context->command_iu_lower = lower_32_bits(sg_dma_address(sg) + sizeof(u32)); /* SMP response comes as UF, so no need to set response IU address. */ task_context->response_iu_upper = 0; task_context->response_iu_lower = 0; -} - -static enum sci_status -scic_io_request_construct_smp(struct scic_sds_request *sci_req) -{ - struct smp_req *smp_req = &sci_req->smp.cmd; - - sci_req->protocol = SCIC_SMP_PROTOCOL; - - /* - * Look at the SMP requests' header fields; for certain SAS 1.x SMP - * functions under SAS 2.0, a zero request length really indicates - * a non-zero default length. - */ - if (smp_req->req_len == 0) { - switch (smp_req->func) { - case SMP_DISCOVER: - case SMP_REPORT_PHY_ERR_LOG: - case SMP_REPORT_PHY_SATA: - case SMP_REPORT_ROUTE_INFO: - smp_req->req_len = 2; - break; - case SMP_CONF_ROUTE_INFO: - case SMP_PHY_CONTROL: - case SMP_PHY_TEST_FUNCTION: - smp_req->req_len = 9; - break; - /* Default - zero is a valid default for 2.0. */ - } - } - - scu_smp_request_construct_task_context(sci_req, smp_req->req_len); sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); @@ -3404,24 +3406,12 @@ scic_io_request_construct_smp(struct scic_sds_request *sci_req) */ static enum sci_status isci_smp_request_build(struct isci_request *ireq) { - enum sci_status status = SCI_FAILURE; struct sas_task *task = isci_request_access_task(ireq); + struct device *dev = &ireq->isci_host->pdev->dev; struct scic_sds_request *sci_req = &ireq->sci; + enum sci_status status = SCI_FAILURE; - dev_dbg(&ireq->isci_host->pdev->dev, - "%s: request = %p\n", __func__, ireq); - - dev_dbg(&ireq->isci_host->pdev->dev, - "%s: smp_req len = %d\n", - __func__, - task->smp_task.smp_req.length); - - /* copy the smp_command to the address; */ - sg_copy_to_buffer(&task->smp_task.smp_req, 1, - &sci_req->smp.cmd, - sizeof(struct smp_req)); - - status = scic_io_request_construct_smp(sci_req); + status = scic_io_request_construct_smp(dev, sci_req, task); if (status != SCI_SUCCESS) dev_warn(&ireq->isci_host->pdev->dev, "%s: failed with status = %d\n", diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 324fb7b..7c8b59a 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -244,7 +244,6 @@ struct scic_sds_request { } ssp; struct { - struct smp_req cmd; struct smp_resp rsp; } smp; diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h index 822a8db..462b151 100644 --- a/drivers/scsi/isci/sas.h +++ b/drivers/scsi/isci/sas.h @@ -190,8 +190,6 @@ struct smp_req_phycntl { u8 _r_h[3]; /* bytes 37-39 */ } __packed; -#define SMP_REQ_VENDOR_SPECIFIC_MAX_LEN 1016 - /* * struct smp_req - This structure simply unionizes the existing request * structures into a common request type. @@ -203,14 +201,7 @@ struct smp_req { u8 func; /* byte 1 */ u8 alloc_resp_len; /* byte 2 */ u8 req_len; /* byte 3 */ - - union { /* bytes 4-N */ - u32 smp_req_gen; - struct smp_req_phy_id phy_id; - struct smp_req_phycntl phy_cntl; - struct smp_req_conf_rtinfo conf_rt_info; - u8 vendor[SMP_REQ_VENDOR_SPECIFIC_MAX_LEN]; - }; + u8 req_data[0]; } __packed; #define SMP_RESP_HDR_SZ 4 -- cgit v0.10.2 From 086a0dabc5bf154e13604a6d71e2d051207f9718 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 21 Jun 2011 16:23:03 -0700 Subject: isci: fix isci_task_execute_tmf completion 1/ fix the timeout for wait_for_completion_timeout 2/ In the tmf timeout case we need to wait for our termination callback 3/ Once the request is successfully started it will be freed according to the normal lifetime for requests. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c313bc1..0835a2c 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -339,7 +339,8 @@ int isci_task_execute_tmf(struct isci_host *ihost, status, ireq); spin_unlock_irqrestore(&ihost->scic_lock, flags); - goto cleanup_request; + isci_request_free(ihost, ireq); + return ret; } if (tmf->cb_state_func != NULL) @@ -354,7 +355,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, /* Wait for the TMF to complete, or a timeout. */ timeleft = wait_for_completion_timeout(&completion, - jiffies + msecs_to_jiffies(timeout_ms)); + msecs_to_jiffies(timeout_ms)); if (timeleft == 0) { spin_lock_irqsave(&ihost->scic_lock, flags); @@ -362,11 +363,13 @@ int isci_task_execute_tmf(struct isci_host *ihost, if (tmf->cb_state_func != NULL) tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); - status = scic_controller_terminate_request(&ihost->sci, - &isci_device->sci, - &ireq->sci); + scic_controller_terminate_request(&ihost->sci, + &isci_device->sci, + &ireq->sci); spin_unlock_irqrestore(&ihost->scic_lock, flags); + + wait_for_completion(tmf->complete); } isci_print_tmf(tmf); @@ -387,13 +390,6 @@ int isci_task_execute_tmf(struct isci_host *ihost, __func__, ireq); - if (ireq->io_request_completion != NULL) { - /* A thread is waiting for this TMF to finish. */ - complete(ireq->io_request_completion); - } - - cleanup_request: - isci_request_free(ihost, ireq); return ret; } -- cgit v0.10.2 From 7cafbf1bd56be44038148bb8f733ea6e6a6a2d53 Mon Sep 17 00:00:00 2001 From: Maciej Patelczyk Date: Tue, 21 Jun 2011 22:03:13 +0000 Subject: isci: possible buffer overflow in isci_parse_oem_parameters fixed scu_index is a parameter of isci_parse_eom_parameters and is an index in controller table. There is a check: scu_index > SCI_MAX_CONTROLLERS which is insufficient and should be: scu_index >= SCI_MAX_CONTROLLERS. scu_index is used as an index in the table which size is SCI_MAX_CONTROLLERS. Signed-off-by: Maciej Patelczyk Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index bc52a61..99b13c1 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -125,7 +125,7 @@ enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params, struct isci_orom *orom, int scu_index) { /* check for valid inputs */ - if (scu_index < 0 || scu_index > SCI_MAX_CONTROLLERS || + if (scu_index < 0 || scu_index >= SCI_MAX_CONTROLLERS || scu_index > orom->hdr.num_elements || !oem_params) return -EINVAL; -- cgit v0.10.2 From 4cffe13e0dfd00f90c86b0153c751dab61a1bf1d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 23 Jun 2011 23:44:52 -0700 Subject: isci: fix frame received locking Updates to the frame_rcvd before need to be atomic with respect to when they are evaluated by libsas. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 93a401d..c01d762 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -893,6 +893,7 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, enum scic_sds_phy_states state = sci_phy->sm.current_state_id; struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; enum sci_status result; + unsigned long flags; switch (state) { case SCI_PHY_SUB_AWAIT_IAF_UF: { @@ -911,7 +912,9 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, if (iaf.frame_type == 0) { u32 state; + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); if (iaf.smp_tport) { /* We got the IAF for an expander PHY go to the final * state since there are no power requirements for @@ -954,9 +957,11 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, frame_index, (void **)&fis_frame_data); + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, frame_header, fis_frame_data); + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); /* got IAF we can now go to the await spinup semaphore state */ sci_change_state(&sci_phy->sm, SCI_PHY_SUB_FINAL); -- cgit v0.10.2 From 9274f45ea551421cd3bf329de9dd8d1e6208285a Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Thu, 23 Jun 2011 17:09:02 -0700 Subject: isci: Terminate dev requests on FIS err bit rx in NCQ When the remote device transitions to a not-ready state because of an NCQ error condition, all outstanding requests to that device are terminated and completed to libsas on the normal path. The device then waits for a READ LOG EXT command to issue on the task management path. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 9f45c2b..c5ce0f0 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -68,17 +68,39 @@ * @isci_host: This parameter specifies the isci host object. * @isci_device: This parameter specifies the remote device * + * scic_lock is held on entrance to this function. */ static void isci_remote_device_not_ready(struct isci_host *ihost, struct isci_remote_device *idev, u32 reason) { + struct isci_request * ireq; + dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, idev); - if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) + switch (reason) { + case SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED: set_bit(IDEV_GONE, &idev->flags); - else + break; + case SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED: + set_bit(IDEV_IO_NCQERROR, &idev->flags); + + /* Kill all outstanding requests for the device. */ + list_for_each_entry(ireq, &idev->reqs_in_process, dev_node) { + + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p request = %p\n", + __func__, idev, ireq); + + scic_controller_terminate_request(&ihost->sci, + &idev->sci, + &ireq->sci); + } + /* Fall through into the default case... */ + default: clear_bit(IDEV_IO_READY, &idev->flags); + break; + } } /** @@ -94,6 +116,7 @@ static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote dev_dbg(&ihost->pdev->dev, "%s: idev = %p\n", __func__, idev); + clear_bit(IDEV_IO_NCQERROR, &idev->flags); set_bit(IDEV_IO_READY, &idev->flags); if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) wake_up(&ihost->eventq); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index cde5950..0d9e37f 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -136,6 +136,7 @@ struct isci_remote_device { #define IDEV_EH 3 #define IDEV_GONE 4 #define IDEV_IO_READY 5 + #define IDEV_IO_NCQERROR 6 unsigned long flags; struct kref kref; struct isci_port *isci_port; diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 1043fed..08a7340b 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -3587,9 +3587,30 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide spin_lock_irqsave(&ihost->scic_lock, flags); - /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io(&ihost->sci, &idev->sci, &ireq->sci, - SCI_CONTROLLER_INVALID_IO_TAG); + if (test_bit(IDEV_IO_NCQERROR, &idev->flags)) { + + if (isci_task_is_ncq_recovery(task)) { + + /* The device is in an NCQ recovery state. Issue the + * request on the task side. Note that it will + * complete on the I/O request side because the + * request was built that way (ie. + * ireq->is_task_management_request is false). + */ + status = scic_controller_start_task(&ihost->sci, + &idev->sci, + &ireq->sci, + SCI_CONTROLLER_INVALID_IO_TAG); + } else { + status = SCI_FAILURE; + } + } else { + + /* send the request, let the core assign the IO TAG. */ + status = scic_controller_start_io(&ihost->sci, &idev->sci, + &ireq->sci, + SCI_CONTROLLER_INVALID_IO_TAG); + } if (status != SCI_SUCCESS && status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { dev_warn(&ihost->pdev->dev, diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 7c8b59a..9130f22 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -687,4 +687,13 @@ scic_task_request_construct_sata(struct scic_sds_request *sci_req); void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); + +static inline int isci_task_is_ncq_recovery(struct sas_task *task) +{ + return (sas_protocol_ata(task->task_proto) && + task->ata_task.fis.command == ATA_CMD_READ_LOG_EXT && + task->ata_task.fis.lbal == ATA_LOG_SATA_NCQ); + +} + #endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 0835a2c..157e997 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -133,6 +133,15 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, for (; num > 0; num--,\ task = list_entry(task->list.next, struct sas_task, list)) + +static inline int isci_device_io_ready(struct isci_remote_device *idev, + struct sas_task *task) +{ + return idev ? test_bit(IDEV_IO_READY, &idev->flags) || + (test_bit(IDEV_IO_NCQERROR, &idev->flags) && + isci_task_is_ncq_recovery(task)) + : 0; +} /** * isci_task_execute_task() - This function is one of the SAS Domain Template * functions. This function is called by libsas to send a task down to @@ -165,7 +174,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) for_each_sas_task(num, task) { spin_lock_irqsave(&ihost->scic_lock, flags); idev = isci_lookup_device(task->dev); - io_ready = idev ? test_bit(IDEV_IO_READY, &idev->flags) : 0; + io_ready = isci_device_io_ready(idev, task); spin_unlock_irqrestore(&ihost->scic_lock, flags); dev_dbg(&ihost->pdev->dev, @@ -178,6 +187,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) SAS_DEVICE_UNKNOWN); isci_host_can_dequeue(ihost, 1); } else if (!io_ready) { + /* Indicate QUEUE_FULL so that the scsi midlayer * retries. */ @@ -299,7 +309,9 @@ int isci_task_execute_tmf(struct isci_host *ihost, /* sanity check, return TMF_RESP_FUNC_FAILED * if the device is not there and ready. */ - if (!isci_device || !test_bit(IDEV_IO_READY, &isci_device->flags)) { + if (!isci_device || + (!test_bit(IDEV_IO_READY, &isci_device->flags) && + !test_bit(IDEV_IO_NCQERROR, &isci_device->flags))) { dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p not ready (%#lx)\n", __func__, -- cgit v0.10.2 From 312e0c2455c18716cf640d4336dcb1e9e5053818 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 28 Jun 2011 13:47:09 -0700 Subject: isci: unify can_queue tracking on the tci_pool, uplevel tag assignment The tci_pool tracks our outstanding command slots which are also the 'index' portion of our tags. Grabbing the tag early in ->lldd_execute_task let's us drop the isci_host_can_queue() and ->was_tag_assigned_by_user infrastructure. ->was_tag_assigned_by_user required the task context to be duplicated in request-local buffer. With the tci established early we can build the task_context directly into its final location and skip a memcpy. With the task context buffer at a known address at request construction we have the opportunity/obligation to also fix sgl handling. This rework feels like it belongs in another patch but the sgl handling and task_context are too intertwined. 1/ fix the 'ab' pair embedded in the task context to point to the 'cd' pair in the task context (previously we were prematurely linking to the staging buffer). 2/ fix the broken iteration of pio sgls that assumes all sgls are relative to the request, and does a dangerous looking reverse lookup of physical address to virtual address. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index b08455f..c99fab5 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1018,33 +1018,11 @@ done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } -static void isci_tci_free(struct isci_host *ihost, u16 tci) -{ - u16 tail = ihost->tci_tail & (SCI_MAX_IO_REQUESTS-1); - - ihost->tci_pool[tail] = tci; - ihost->tci_tail = tail + 1; -} - -static u16 isci_tci_alloc(struct isci_host *ihost) -{ - u16 head = ihost->tci_head & (SCI_MAX_IO_REQUESTS-1); - u16 tci = ihost->tci_pool[head]; - - ihost->tci_head = head + 1; - return tci; -} - static u16 isci_tci_active(struct isci_host *ihost) { return CIRC_CNT(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); } -static u16 isci_tci_space(struct isci_host *ihost) -{ - return CIRC_SPACE(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); -} - static enum sci_status scic_controller_start(struct scic_sds_controller *scic, u32 timeout) { @@ -1205,6 +1183,11 @@ static void isci_host_completion_routine(unsigned long data) task->task_done(task); } } + + spin_lock_irq(&isci_host->scic_lock); + isci_free_tag(isci_host, request->sci.io_tag); + spin_unlock_irq(&isci_host->scic_lock); + /* Free the request object. */ isci_request_free(isci_host, request); } @@ -1242,6 +1225,7 @@ static void isci_host_completion_routine(unsigned long data) * of pending requests. */ list_del_init(&request->dev_node); + isci_free_tag(isci_host, request->sci.io_tag); spin_unlock_irq(&isci_host->scic_lock); /* Free the request object. */ @@ -2375,6 +2359,7 @@ static int scic_controller_mem_init(struct scic_sds_controller *scic) if (!scic->task_context_table) return -ENOMEM; + scic->task_context_dma = dma; writel(lower_32_bits(dma), &scic->smu_registers->host_task_table_lower); writel(upper_32_bits(dma), &scic->smu_registers->host_task_table_upper); @@ -2409,11 +2394,9 @@ int isci_host_init(struct isci_host *isci_host) spin_lock_init(&isci_host->state_lock); spin_lock_init(&isci_host->scic_lock); - spin_lock_init(&isci_host->queue_lock); init_waitqueue_head(&isci_host->eventq); isci_host_change_state(isci_host, isci_starting); - isci_host->can_queue = ISCI_CAN_QUEUE_VAL; status = scic_controller_construct(&isci_host->sci, scu_base(isci_host), smu_base(isci_host)); @@ -2611,51 +2594,6 @@ void scic_sds_controller_post_request( writel(request, &scic->smu_registers->post_context_port); } -/** - * This method will copy the soft copy of the task context into the physical - * memory accessible by the controller. - * @scic: This parameter specifies the controller for which to copy - * the task context. - * @sci_req: This parameter specifies the request for which the task - * context is being copied. - * - * After this call is made the SCIC_SDS_IO_REQUEST object will always point to - * the physical memory version of the task context. Thus, all subsequent - * updates to the task context are performed in the TC table (i.e. DMAable - * memory). none - */ -void scic_sds_controller_copy_task_context( - struct scic_sds_controller *scic, - struct scic_sds_request *sci_req) -{ - struct scu_task_context *task_context_buffer; - - task_context_buffer = scic_sds_controller_get_task_context_buffer( - scic, sci_req->io_tag); - - memcpy(task_context_buffer, - sci_req->task_context_buffer, - offsetof(struct scu_task_context, sgl_snapshot_ac)); - - /* - * Now that the soft copy of the TC has been copied into the TC - * table accessible by the silicon. Thus, any further changes to - * the TC (e.g. TC termination) occur in the appropriate location. */ - sci_req->task_context_buffer = task_context_buffer; -} - -struct scu_task_context *scic_sds_controller_get_task_context_buffer(struct scic_sds_controller *scic, - u16 io_tag) -{ - u16 tci = ISCI_TAG_TCI(io_tag); - - if (tci < scic->task_context_entries) { - return &scic->task_context_table[tci]; - } - - return NULL; -} - struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 io_tag) { u16 task_index; @@ -2801,6 +2739,60 @@ void scic_sds_controller_release_frame( &scic->scu_registers->sdma.unsolicited_frame_get_pointer); } +void isci_tci_free(struct isci_host *ihost, u16 tci) +{ + u16 tail = ihost->tci_tail & (SCI_MAX_IO_REQUESTS-1); + + ihost->tci_pool[tail] = tci; + ihost->tci_tail = tail + 1; +} + +static u16 isci_tci_alloc(struct isci_host *ihost) +{ + u16 head = ihost->tci_head & (SCI_MAX_IO_REQUESTS-1); + u16 tci = ihost->tci_pool[head]; + + ihost->tci_head = head + 1; + return tci; +} + +static u16 isci_tci_space(struct isci_host *ihost) +{ + return CIRC_SPACE(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); +} + +u16 isci_alloc_tag(struct isci_host *ihost) +{ + if (isci_tci_space(ihost)) { + u16 tci = isci_tci_alloc(ihost); + u8 seq = ihost->sci.io_request_sequence[tci]; + + return ISCI_TAG(seq, tci); + } + + return SCI_CONTROLLER_INVALID_IO_TAG; +} + +enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) +{ + struct scic_sds_controller *scic = &ihost->sci; + u16 tci = ISCI_TAG_TCI(io_tag); + u16 seq = ISCI_TAG_SEQ(io_tag); + + /* prevent tail from passing head */ + if (isci_tci_active(ihost) == 0) + return SCI_FAILURE_INVALID_IO_TAG; + + if (seq == scic->io_request_sequence[tci]) { + scic->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1); + + isci_tci_free(ihost, tci); + + return SCI_SUCCESS; + } + return SCI_FAILURE_INVALID_IO_TAG; +} + /** * scic_controller_start_io() - This method is called by the SCI user to * send/start an IO request. If the method invocation is successful, then @@ -2811,27 +2803,11 @@ void scic_sds_controller_release_frame( * IO request. * @io_request: the handle to the io request object to start. * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. This parameter is optional. - * The user is allowed to supply SCI_CONTROLLER_INVALID_IO_TAG as the value - * for this parameter. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - For SATA, the user is required to manage NCQ tags. As a - * result, it is expected the user will have set the NCQ tag field in the host - * to device register FIS prior to calling this method. There is also a - * requirement for the user to call scic_stp_io_set_ncq_tag() prior to invoking - * the scic_controller_start_io() method. scic_controller_allocate_tag() for - * more information on allocating a tag. Indicate if the controller - * successfully started the IO request. SCI_SUCCESS if the IO request was - * successfully started. Determine the failure situations and return values. + * user desires to be utilized for this request. */ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, struct scic_sds_remote_device *rdev, - struct scic_sds_request *req, - u16 io_tag) + struct scic_sds_request *req) { enum sci_status status; @@ -2902,17 +2878,6 @@ enum sci_status scic_controller_terminate_request( * @remote_device: The handle to the remote device object for which to complete * the IO request. * @io_request: the handle to the io request object to complete. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI - * Core user, using the scic_controller_allocate_io_tag() method, then it is - * the responsibility of the caller to invoke the scic_controller_free_io_tag() - * method to free the tag (i.e. this method will not free the IO tag). Indicate - * if the controller successfully completed the IO request. SCI_SUCCESS if the - * completion process was successful. */ enum sci_status scic_controller_complete_io( struct scic_sds_controller *scic, @@ -2963,31 +2928,11 @@ enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) * @remote_device: the handle to the remote device object for which to start * the task management request. * @task_request: the handle to the task request object to start. - * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. Note this not the io_tag - * of the request being managed. It is to be utilized for the task request - * itself. This parameter is optional. The user is allowed to supply - * SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - The user must synchronize this task with completion - * queue processing. If they are not synchronized then it is possible for the - * io requests that are being managed by the task request can complete before - * starting the task request. scic_controller_allocate_tag() for more - * information on allocating a tag. Indicate if the controller successfully - * started the IO request. SCI_TASK_SUCCESS if the task request was - * successfully started. SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is - * returned if there is/are task(s) outstanding that require termination or - * completion before this request can succeed. */ enum sci_task_status scic_controller_start_task( struct scic_sds_controller *scic, struct scic_sds_remote_device *rdev, - struct scic_sds_request *req, - u16 task_tag) + struct scic_sds_request *req) { enum sci_status status; @@ -3022,85 +2967,3 @@ enum sci_task_status scic_controller_start_task( return status; } - -/** - * scic_controller_allocate_io_tag() - This method will allocate a tag from the - * pool of free IO tags. Direct allocation of IO tags by the SCI Core user - * is optional. The scic_controller_start_io() method will allocate an IO - * tag if this method is not utilized and the tag is not supplied to the IO - * construct routine. Direct allocation of IO tags may provide additional - * performance improvements in environments capable of supporting this usage - * model. Additionally, direct allocation of IO tags also provides - * additional flexibility to the SCI Core user. Specifically, the user may - * retain IO tags across the lives of multiple IO requests. - * @controller: the handle to the controller object for which to allocate the - * tag. - * - * IO tags are a protected resource. It is incumbent upon the SCI Core user to - * ensure that each of the methods that may allocate or free available IO tags - * are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). An unsigned integer representing an available IO tag. - * SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there are no - * currently available tags to be allocated. All return other values indicate a - * legitimate tag. - */ -u16 scic_controller_allocate_io_tag(struct scic_sds_controller *scic) -{ - struct isci_host *ihost = scic_to_ihost(scic); - - if (isci_tci_space(ihost)) { - u16 tci = isci_tci_alloc(ihost); - u8 seq = scic->io_request_sequence[tci]; - - return ISCI_TAG(seq, tci); - } - - return SCI_CONTROLLER_INVALID_IO_TAG; -} - -/** - * scic_controller_free_io_tag() - This method will free an IO tag to the pool - * of free IO tags. This method provides the SCI Core user more flexibility - * with regards to IO tags. The user may desire to keep an IO tag after an - * IO request has completed, because they plan on re-using the tag for a - * subsequent IO request. This method is only legal if the tag was - * allocated via scic_controller_allocate_io_tag(). - * @controller: This parameter specifies the handle to the controller object - * for which to free/return the tag. - * @io_tag: This parameter represents the tag to be freed to the pool of - * available tags. - * - * - IO tags are a protected resource. It is incumbent upon the SCI Core user - * to ensure that each of the methods that may allocate or free available IO - * tags are handled in a mutually exclusive manner. This method is one of said - * methods requiring proper critical code section protection (e.g. semaphore, - * spin-lock, etc.). - If the IO tag for a request was allocated, by the SCI - * Core user, using the scic_controller_allocate_io_tag() method, then it is - * the responsibility of the caller to invoke this method to free the tag. This - * method returns an indication of whether the tag was successfully put back - * (freed) to the pool of available tags. SCI_SUCCESS This return value - * indicates the tag was successfully placed into the pool of available IO - * tags. SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied tag - * is not a valid IO tag value. - */ -enum sci_status scic_controller_free_io_tag(struct scic_sds_controller *scic, - u16 io_tag) -{ - struct isci_host *ihost = scic_to_ihost(scic); - u16 tci = ISCI_TAG_TCI(io_tag); - u16 seq = ISCI_TAG_SEQ(io_tag); - - /* prevent tail from passing head */ - if (isci_tci_active(ihost) == 0) - return SCI_FAILURE_INVALID_IO_TAG; - - if (seq == scic->io_request_sequence[tci]) { - scic->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1); - - isci_tci_free(ihost, ISCI_TAG_TCI(io_tag)); - - return SCI_SUCCESS; - } - return SCI_FAILURE_INVALID_IO_TAG; -} diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index a54397e..d8164f5 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -192,6 +192,7 @@ struct scic_sds_controller { * context table. This data is shared between the hardware and software. */ struct scu_task_context *task_context_table; + dma_addr_t task_context_dma; /** * This field is a pointer to the memory allocated by the driver for the @@ -302,12 +303,8 @@ struct isci_host { struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ struct sas_ha_struct sas_ha; - int can_queue; - spinlock_t queue_lock; spinlock_t state_lock; - struct pci_dev *pdev; - enum isci_status status; #define IHOST_START_PENDING 0 #define IHOST_STOP_PENDING 1 @@ -451,36 +448,6 @@ static inline void isci_host_change_state(struct isci_host *isci_host, } -static inline int isci_host_can_queue(struct isci_host *isci_host, int num) -{ - int ret = 0; - unsigned long flags; - - spin_lock_irqsave(&isci_host->queue_lock, flags); - if ((isci_host->can_queue - num) < 0) { - dev_dbg(&isci_host->pdev->dev, - "%s: isci_host->can_queue = %d\n", - __func__, - isci_host->can_queue); - ret = -SAS_QUEUE_FULL; - - } else - isci_host->can_queue -= num; - - spin_unlock_irqrestore(&isci_host->queue_lock, flags); - - return ret; -} - -static inline void isci_host_can_dequeue(struct isci_host *isci_host, int num) -{ - unsigned long flags; - - spin_lock_irqsave(&isci_host->queue_lock, flags); - isci_host->can_queue += num; - spin_unlock_irqrestore(&isci_host->queue_lock, flags); -} - static inline void wait_for_start(struct isci_host *ihost) { wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags)); @@ -646,10 +613,6 @@ union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffe struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 io_tag); -struct scu_task_context *scic_sds_controller_get_task_context_buffer( - struct scic_sds_controller *scic, - u16 io_tag); - void scic_sds_controller_power_control_queue_insert( struct scic_sds_controller *scic, struct scic_sds_phy *sci_phy); @@ -681,6 +644,9 @@ void scic_sds_controller_register_setup(struct scic_sds_controller *scic); enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req); int isci_host_scan_finished(struct Scsi_Host *, unsigned long); void isci_host_scan_start(struct Scsi_Host *); +u16 isci_alloc_tag(struct isci_host *ihost); +enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag); +void isci_tci_free(struct isci_host *ihost, u16 tci); int isci_host_init(struct isci_host *); @@ -708,14 +674,12 @@ void scic_controller_disable_interrupts( enum sci_status scic_controller_start_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request, - u16 io_tag); + struct scic_sds_request *io_request); enum sci_task_status scic_controller_start_task( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, - struct scic_sds_request *task_request, - u16 io_tag); + struct scic_sds_request *task_request); enum sci_status scic_controller_terminate_request( struct scic_sds_controller *scic, @@ -727,13 +691,6 @@ enum sci_status scic_controller_complete_io( struct scic_sds_remote_device *remote_device, struct scic_sds_request *io_request); -u16 scic_controller_allocate_io_tag( - struct scic_sds_controller *scic); - -enum sci_status scic_controller_free_io_tag( - struct scic_sds_controller *scic, - u16 io_tag); - void scic_sds_port_configuration_agent_construct( struct scic_sds_port_configuration_agent *port_agent); diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 5f4a4e3..0e84e29 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -695,35 +695,21 @@ static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u1 */ static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tag) { + struct scic_sds_controller *scic = sci_port->owning_controller; struct scu_task_context *task_context; - task_context = scic_sds_controller_get_task_context_buffer(sci_port->owning_controller, tag); - + task_context = &scic->task_context_table[ISCI_TAG_TCI(tag)]; memset(task_context, 0, sizeof(struct scu_task_context)); - task_context->abort = 0; - task_context->priority = 0; task_context->initiator_request = 1; task_context->connection_rate = 1; - task_context->protocol_engine_index = 0; task_context->logical_port_index = sci_port->physical_port_index; task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; task_context->task_index = ISCI_TAG_TCI(tag); task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; - task_context->remote_node_index = sci_port->reserved_rni; - task_context->command_code = 0; - - task_context->link_layer_control = 0; task_context->do_not_dma_ssp_good_response = 1; - task_context->strict_ordering = 0; - task_context->control_frame = 0; - task_context->timeout_enable = 0; - task_context->block_guard_enable = 0; - - task_context->address_modifier = 0; - task_context->task_phase = 0x01; } @@ -731,15 +717,15 @@ static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port { struct scic_sds_controller *scic = sci_port->owning_controller; - if (sci_port->reserved_tci != SCU_DUMMY_INDEX) - scic_controller_free_io_tag(scic, sci_port->reserved_tci); + if (sci_port->reserved_tag != SCI_CONTROLLER_INVALID_IO_TAG) + isci_free_tag(scic_to_ihost(scic), sci_port->reserved_tag); if (sci_port->reserved_rni != SCU_DUMMY_INDEX) scic_sds_remote_node_table_release_remote_node_index(&scic->available_remote_nodes, 1, sci_port->reserved_rni); sci_port->reserved_rni = SCU_DUMMY_INDEX; - sci_port->reserved_tci = SCU_DUMMY_INDEX; + sci_port->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; } /** @@ -1119,18 +1105,17 @@ scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port) */ static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) { - u32 command; - struct scu_task_context *task_context; struct scic_sds_controller *scic = sci_port->owning_controller; - u16 tci = sci_port->reserved_tci; - - task_context = scic_sds_controller_get_task_context_buffer(scic, tci); + u16 tag = sci_port->reserved_tag; + struct scu_task_context *tc; + u32 command; - task_context->abort = 0; + tc = &scic->task_context_table[ISCI_TAG_TCI(tag)]; + tc->abort = 0; command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | - tci; + ISCI_TAG_TCI(tag); scic_sds_controller_post_request(scic, command); } @@ -1145,17 +1130,16 @@ static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) { struct scic_sds_controller *scic = sci_port->owning_controller; - u16 tci = sci_port->reserved_tci; + u16 tag = sci_port->reserved_tag; struct scu_task_context *tc; u32 command; - tc = scic_sds_controller_get_task_context_buffer(scic, tci); - + tc = &scic->task_context_table[ISCI_TAG_TCI(tag)]; tc->abort = 1; command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT | sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | - tci; + ISCI_TAG_TCI(tag); scic_sds_controller_post_request(scic, command); } @@ -1333,15 +1317,16 @@ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) sci_port->reserved_rni = rni; } - if (sci_port->reserved_tci == SCU_DUMMY_INDEX) { - /* Allocate a TCI and remove the sequence nibble */ - u16 tci = scic_controller_allocate_io_tag(scic); + if (sci_port->reserved_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + struct isci_host *ihost = scic_to_ihost(scic); + u16 tag; - if (tci != SCU_DUMMY_INDEX) - scic_sds_port_construct_dummy_task(sci_port, tci); - else + tag = isci_alloc_tag(ihost); + if (tag == SCI_CONTROLLER_INVALID_IO_TAG) status = SCI_FAILURE_INSUFFICIENT_RESOURCES; - sci_port->reserved_tci = tci; + else + scic_sds_port_construct_dummy_task(sci_port, tag); + sci_port->reserved_tag = tag; } if (status == SCI_SUCCESS) { @@ -1859,7 +1844,7 @@ void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, sci_port->assigned_device_count = 0; sci_port->reserved_rni = SCU_DUMMY_INDEX; - sci_port->reserved_tci = SCU_DUMMY_INDEX; + sci_port->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; sci_init_timer(&sci_port->timer, port_timeout); diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 45c01f8..a44e541 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -108,7 +108,7 @@ struct scic_sds_port { u8 active_phy_mask; u16 reserved_rni; - u16 reserved_tci; + u16 reserved_tag; /** * This field contains the count of the io requests started on this port diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 08a7340b..55859d5 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -61,42 +61,50 @@ #include "scu_event_codes.h" #include "sas.h" -/** - * This method returns the sgl element pair for the specificed sgl_pair index. - * @sci_req: This parameter specifies the IO request for which to retrieve - * the Scatter-Gather List element pair. - * @sgl_pair_index: This parameter specifies the index into the SGL element - * pair to be retrieved. - * - * This method returns a pointer to an struct scu_sgl_element_pair. - */ -static struct scu_sgl_element_pair *scic_sds_request_get_sgl_element_pair( - struct scic_sds_request *sci_req, - u32 sgl_pair_index - ) { - struct scu_task_context *task_context; +static struct scu_sgl_element_pair *to_sgl_element_pair(struct scic_sds_request *sci_req, + int idx) +{ + if (idx == 0) + return &sci_req->tc->sgl_pair_ab; + else if (idx == 1) + return &sci_req->tc->sgl_pair_cd; + else if (idx < 0) + return NULL; + else + return &sci_req->sg_table[idx - 2]; +} - task_context = (struct scu_task_context *)sci_req->task_context_buffer; +static dma_addr_t to_sgl_element_pair_dma(struct scic_sds_controller *scic, + struct scic_sds_request *sci_req, u32 idx) +{ + u32 offset; - if (sgl_pair_index == 0) { - return &task_context->sgl_pair_ab; - } else if (sgl_pair_index == 1) { - return &task_context->sgl_pair_cd; + if (idx == 0) { + offset = (void *) &sci_req->tc->sgl_pair_ab - + (void *) &scic->task_context_table[0]; + return scic->task_context_dma + offset; + } else if (idx == 1) { + offset = (void *) &sci_req->tc->sgl_pair_cd - + (void *) &scic->task_context_table[0]; + return scic->task_context_dma + offset; } - return &sci_req->sg_table[sgl_pair_index - 2]; + return scic_io_request_get_dma_addr(sci_req, &sci_req->sg_table[idx - 2]); +} + +static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) +{ + e->length = sg_dma_len(sg); + e->address_upper = upper_32_bits(sg_dma_address(sg)); + e->address_lower = lower_32_bits(sg_dma_address(sg)); + e->address_modifier = 0; } -/** - * This function will build the SGL list for an IO request. - * @sci_req: This parameter specifies the IO request for which to build - * the Scatter-Gather List. - * - */ static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) { struct isci_request *isci_request = sci_req_to_ireq(sds_request); struct isci_host *isci_host = isci_request->isci_host; + struct scic_sds_controller *scic = &isci_host->sci; struct sas_task *task = isci_request_access_task(isci_request); struct scatterlist *sg = NULL; dma_addr_t dma_addr; @@ -108,25 +116,19 @@ static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) sg = task->scatter; while (sg) { - scu_sg = scic_sds_request_get_sgl_element_pair( - sds_request, - sg_idx); - - SCU_SGL_COPY(scu_sg->A, sg); - + scu_sg = to_sgl_element_pair(sds_request, sg_idx); + init_sgl_element(&scu_sg->A, sg); sg = sg_next(sg); - if (sg) { - SCU_SGL_COPY(scu_sg->B, sg); + init_sgl_element(&scu_sg->B, sg); sg = sg_next(sg); } else - SCU_SGL_ZERO(scu_sg->B); + memset(&scu_sg->B, 0, sizeof(scu_sg->B)); if (prev_sg) { - dma_addr = - scic_io_request_get_dma_addr( - sds_request, - scu_sg); + dma_addr = to_sgl_element_pair_dma(scic, + sds_request, + sg_idx); prev_sg->next_pair_upper = upper_32_bits(dma_addr); @@ -138,8 +140,7 @@ static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) sg_idx++; } } else { /* handle when no sg */ - scu_sg = scic_sds_request_get_sgl_element_pair(sds_request, - sg_idx); + scu_sg = to_sgl_element_pair(sds_request, sg_idx); dma_addr = dma_map_single(&isci_host->pdev->dev, task->scatter, @@ -246,35 +247,12 @@ static void scu_ssp_reqeust_construct_task_context( /* task_context->type.ssp.tag = sci_req->io_tag; */ task_context->task_phase = 0x01; - if (sds_request->was_tag_assigned_by_user) { - /* - * Build the task context now since we have already read - * the data - */ - sds_request->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(sds_request->io_tag)); - } else { - /* - * Build the task context now since we have already read - * the data - * - * I/O tag index is not assigned because we have to wait - * until we get a TCi - */ - sds_request->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - owning_controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); - } + sds_request->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group(controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(sds_request->io_tag)); /* * Copy the physical address for the command buffer to the @@ -302,14 +280,11 @@ static void scu_ssp_reqeust_construct_task_context( * @sci_req: * */ -static void scu_ssp_io_request_construct_task_context( - struct scic_sds_request *sci_req, - enum dma_data_direction dir, - u32 len) +static void scu_ssp_io_request_construct_task_context(struct scic_sds_request *sci_req, + enum dma_data_direction dir, + u32 len) { - struct scu_task_context *task_context; - - task_context = scic_sds_request_get_task_context(sci_req); + struct scu_task_context *task_context = sci_req->tc; scu_ssp_reqeust_construct_task_context(sci_req, task_context); @@ -347,12 +322,9 @@ static void scu_ssp_io_request_construct_task_context( * constructed. * */ -static void scu_ssp_task_request_construct_task_context( - struct scic_sds_request *sci_req) +static void scu_ssp_task_request_construct_task_context(struct scic_sds_request *sci_req) { - struct scu_task_context *task_context; - - task_context = scic_sds_request_get_task_context(sci_req); + struct scu_task_context *task_context = sci_req->tc; scu_ssp_reqeust_construct_task_context(sci_req, task_context); @@ -421,35 +393,12 @@ static void scu_sata_reqeust_construct_task_context( /* Set the first word of the H2D REG FIS */ task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd; - if (sci_req->was_tag_assigned_by_user) { - /* - * Build the task context now since we have already read - * the data - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(sci_req->io_tag)); - } else { - /* - * Build the task context now since we have already read - * the data. - * I/O tag index is not assigned because we have to wait - * until we get a TCi. - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group( - controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); - } - + sci_req->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group(controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(target_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(sci_req->io_tag)); /* * Copy the physical address for the command buffer to the SCU Task * Context. We must offset the command buffer by 4 bytes because the @@ -467,22 +416,9 @@ static void scu_sata_reqeust_construct_task_context( task_context->response_iu_lower = 0; } - - -/** - * scu_stp_raw_request_construct_task_context - - * @sci_req: This parameter specifies the STP request object for which to - * construct a RAW command frame task context. - * @task_context: This parameter specifies the SCU specific task context buffer - * to construct. - * - * This method performs the operations common to all SATA/STP requests - * utilizing the raw frame method. none - */ -static void scu_stp_raw_request_construct_task_context(struct scic_sds_stp_request *stp_req, - struct scu_task_context *task_context) +static void scu_stp_raw_request_construct_task_context(struct scic_sds_request *sci_req) { - struct scic_sds_request *sci_req = to_sci_req(stp_req); + struct scu_task_context *task_context = sci_req->tc; scu_sata_reqeust_construct_task_context(sci_req, task_context); @@ -500,8 +436,7 @@ scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, struct scic_sds_stp_request *stp_req = &sci_req->stp.req; struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; - scu_stp_raw_request_construct_task_context(stp_req, - sci_req->task_context_buffer); + scu_stp_raw_request_construct_task_context(sci_req); pio->current_transfer_bytes = 0; pio->ending_error = 0; @@ -512,13 +447,10 @@ scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, if (copy_rx_frame) { scic_sds_request_build_sgl(sci_req); - /* Since the IO request copy of the TC contains the same data as - * the actual TC this pointer is vaild for either. - */ - pio->request_current.sgl_pair = &sci_req->task_context_buffer->sgl_pair_ab; + pio->request_current.sgl_index = 0; } else { /* The user does not want the data copied to the SGL buffer location */ - pio->request_current.sgl_pair = NULL; + pio->request_current.sgl_index = -1; } return SCI_SUCCESS; @@ -541,7 +473,7 @@ static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sc u32 len, enum dma_data_direction dir) { - struct scu_task_context *task_context = sci_req->task_context_buffer; + struct scu_task_context *task_context = sci_req->tc; /* Build the STP task context structure */ scu_sata_reqeust_construct_task_context(sci_req, task_context); @@ -587,8 +519,7 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, if (tmf->tmf_code == isci_tmf_sata_srst_high || tmf->tmf_code == isci_tmf_sata_srst_low) { - scu_stp_raw_request_construct_task_context(&sci_req->stp.req, - sci_req->task_context_buffer); + scu_stp_raw_request_construct_task_context(sci_req); return SCI_SUCCESS; } else { dev_err(scic_to_dev(sci_req->owning_controller), @@ -611,8 +542,7 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, /* non data */ if (task->data_dir == DMA_NONE) { - scu_stp_raw_request_construct_task_context(&sci_req->stp.req, - sci_req->task_context_buffer); + scu_stp_raw_request_construct_task_context(sci_req); return SCI_SUCCESS; } @@ -701,8 +631,7 @@ enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_re if (tmf->tmf_code == isci_tmf_sata_srst_high || tmf->tmf_code == isci_tmf_sata_srst_low) { - scu_stp_raw_request_construct_task_context(&sci_req->stp.req, - sci_req->task_context_buffer); + scu_stp_raw_request_construct_task_context(sci_req); } else { dev_err(scic_to_dev(sci_req->owning_controller), "%s: Request 0x%p received un-handled SAT " @@ -749,9 +678,9 @@ static u32 sci_req_tx_bytes(struct scic_sds_request *sci_req) enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) { - struct scic_sds_controller *scic = sci_req->owning_controller; - struct scu_task_context *task_context; enum sci_base_request_states state; + struct scu_task_context *tc = sci_req->tc; + struct scic_sds_controller *scic = sci_req->owning_controller; state = sci_req->sm.current_state_id; if (state != SCI_REQ_CONSTRUCTED) { @@ -761,61 +690,39 @@ enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) return SCI_FAILURE_INVALID_STATE; } - /* if necessary, allocate a TCi for the io request object and then will, - * if necessary, copy the constructed TC data into the actual TC buffer. - * If everything is successful the post context field is updated with - * the TCi so the controller can post the request to the hardware. - */ - if (sci_req->io_tag == SCI_CONTROLLER_INVALID_IO_TAG) - sci_req->io_tag = scic_controller_allocate_io_tag(scic); - - /* Record the IO Tag in the request */ - if (sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG) { - task_context = sci_req->task_context_buffer; - - task_context->task_index = ISCI_TAG_TCI(sci_req->io_tag); - - switch (task_context->protocol_type) { - case SCU_TASK_CONTEXT_PROTOCOL_SMP: - case SCU_TASK_CONTEXT_PROTOCOL_SSP: - /* SSP/SMP Frame */ - task_context->type.ssp.tag = sci_req->io_tag; - task_context->type.ssp.target_port_transfer_tag = - 0xFFFF; - break; + tc->task_index = ISCI_TAG_TCI(sci_req->io_tag); - case SCU_TASK_CONTEXT_PROTOCOL_STP: - /* STP/SATA Frame - * task_context->type.stp.ncq_tag = sci_req->ncq_tag; - */ - break; - - case SCU_TASK_CONTEXT_PROTOCOL_NONE: - /* / @todo When do we set no protocol type? */ - break; + switch (tc->protocol_type) { + case SCU_TASK_CONTEXT_PROTOCOL_SMP: + case SCU_TASK_CONTEXT_PROTOCOL_SSP: + /* SSP/SMP Frame */ + tc->type.ssp.tag = sci_req->io_tag; + tc->type.ssp.target_port_transfer_tag = 0xFFFF; + break; - default: - /* This should never happen since we build the IO - * requests */ - break; - } + case SCU_TASK_CONTEXT_PROTOCOL_STP: + /* STP/SATA Frame + * tc->type.stp.ncq_tag = sci_req->ncq_tag; + */ + break; - /* - * Check to see if we need to copy the task context buffer - * or have been building into the task context buffer */ - if (sci_req->was_tag_assigned_by_user == false) - scic_sds_controller_copy_task_context(scic, sci_req); + case SCU_TASK_CONTEXT_PROTOCOL_NONE: + /* / @todo When do we set no protocol type? */ + break; - /* Add to the post_context the io tag value */ - sci_req->post_context |= ISCI_TAG_TCI(sci_req->io_tag); + default: + /* This should never happen since we build the IO + * requests */ + break; + } - /* Everything is good go ahead and change state */ - sci_change_state(&sci_req->sm, SCI_REQ_STARTED); + /* Add to the post_context the io tag value */ + sci_req->post_context |= ISCI_TAG_TCI(sci_req->io_tag); - return SCI_SUCCESS; - } + /* Everything is good go ahead and change state */ + sci_change_state(&sci_req->sm, SCI_REQ_STARTED); - return SCI_FAILURE_INSUFFICIENT_RESOURCES; + return SCI_SUCCESS; } enum sci_status @@ -880,9 +787,6 @@ enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req) "isci: request completion from wrong state (%d)\n", state)) return SCI_FAILURE_INVALID_STATE; - if (!sci_req->was_tag_assigned_by_user) - scic_controller_free_io_tag(scic, sci_req->io_tag); - if (sci_req->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) scic_sds_controller_release_frame(scic, sci_req->saved_rx_frame_index); @@ -1244,51 +1148,40 @@ void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *req, * @note This could be made to return an error to the user if the user * attempts to set the NCQ tag in the wrong state. */ - req->task_context_buffer->type.stp.ncq_tag = ncq_tag; + req->tc->type.stp.ncq_tag = ncq_tag; } -/** - * - * @sci_req: - * - * Get the next SGL element from the request. - Check on which SGL element pair - * we are working - if working on SLG pair element A - advance to element B - - * else - check to see if there are more SGL element pairs for this IO request - * - if there are more SGL element pairs - advance to the next pair and return - * element A struct scu_sgl_element* - */ -static struct scu_sgl_element *scic_sds_stp_request_pio_get_next_sgl(struct scic_sds_stp_request *stp_req) +static struct scu_sgl_element *pio_sgl_next(struct scic_sds_stp_request *stp_req) { - struct scu_sgl_element *current_sgl; + struct scu_sgl_element *sgl; + struct scu_sgl_element_pair *sgl_pair; struct scic_sds_request *sci_req = to_sci_req(stp_req); struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; - if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - if (pio_sgl->sgl_pair->B.address_lower == 0 && - pio_sgl->sgl_pair->B.address_upper == 0) { - current_sgl = NULL; + sgl_pair = to_sgl_element_pair(sci_req, pio_sgl->sgl_index); + if (!sgl_pair) + sgl = NULL; + else if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + if (sgl_pair->B.address_lower == 0 && + sgl_pair->B.address_upper == 0) { + sgl = NULL; } else { pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B; - current_sgl = &pio_sgl->sgl_pair->B; + sgl = &sgl_pair->B; } } else { - if (pio_sgl->sgl_pair->next_pair_lower == 0 && - pio_sgl->sgl_pair->next_pair_upper == 0) { - current_sgl = NULL; + if (sgl_pair->next_pair_lower == 0 && + sgl_pair->next_pair_upper == 0) { + sgl = NULL; } else { - u64 phys_addr; - - phys_addr = pio_sgl->sgl_pair->next_pair_upper; - phys_addr <<= 32; - phys_addr |= pio_sgl->sgl_pair->next_pair_lower; - - pio_sgl->sgl_pair = scic_request_get_virt_addr(sci_req, phys_addr); + pio_sgl->sgl_index++; pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A; - current_sgl = &pio_sgl->sgl_pair->A; + sgl_pair = to_sgl_element_pair(sci_req, pio_sgl->sgl_index); + sgl = &sgl_pair->A; } } - return current_sgl; + return sgl; } static enum sci_status @@ -1328,21 +1221,19 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( struct scic_sds_request *sci_req, u32 length) { - struct scic_sds_controller *scic = sci_req->owning_controller; struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scu_task_context *task_context; + struct scu_task_context *task_context = sci_req->tc; + struct scu_sgl_element_pair *sgl_pair; struct scu_sgl_element *current_sgl; /* Recycle the TC and reconstruct it for sending out DATA FIS containing * for the data from current_sgl+offset for the input length */ - task_context = scic_sds_controller_get_task_context_buffer(scic, - sci_req->io_tag); - + sgl_pair = to_sgl_element_pair(sci_req, stp_req->type.pio.request_current.sgl_index); if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) - current_sgl = &stp_req->type.pio.request_current.sgl_pair->A; + current_sgl = &sgl_pair->A; else - current_sgl = &stp_req->type.pio.request_current.sgl_pair->B; + current_sgl = &sgl_pair->B; /* update the TC */ task_context->command_iu_upper = current_sgl->address_upper; @@ -1362,18 +1253,21 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct sc u32 remaining_bytes_in_current_sgl = 0; enum sci_status status = SCI_SUCCESS; struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct scu_sgl_element_pair *sgl_pair; sgl_offset = stp_req->type.pio.request_current.sgl_offset; + sgl_pair = to_sgl_element_pair(sci_req, stp_req->type.pio.request_current.sgl_index); + if (WARN_ONCE(!sgl_pair, "%s: null sgl element", __func__)) + return SCI_FAILURE; if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - current_sgl = &(stp_req->type.pio.request_current.sgl_pair->A); - remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->A.length - sgl_offset; + current_sgl = &sgl_pair->A; + remaining_bytes_in_current_sgl = sgl_pair->A.length - sgl_offset; } else { - current_sgl = &(stp_req->type.pio.request_current.sgl_pair->B); - remaining_bytes_in_current_sgl = stp_req->type.pio.request_current.sgl_pair->B.length - sgl_offset; + current_sgl = &sgl_pair->B; + remaining_bytes_in_current_sgl = sgl_pair->B.length - sgl_offset; } - if (stp_req->type.pio.pio_transfer_bytes > 0) { if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ @@ -1382,7 +1276,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct sc stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; /* update the current sgl, sgl_offset and save for future */ - current_sgl = scic_sds_stp_request_pio_get_next_sgl(stp_req); + current_sgl = pio_sgl_next(stp_req); sgl_offset = 0; } } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { @@ -1945,7 +1839,7 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, return status; } - if (stp_req->type.pio.request_current.sgl_pair == NULL) { + if (stp_req->type.pio.request_current.sgl_index < 0) { sci_req->saved_rx_frame_index = frame_index; stp_req->type.pio.pio_transfer_bytes = 0; } else { @@ -2977,8 +2871,6 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * task to recognize the already completed case. */ request->terminated = true; - - isci_host_can_dequeue(isci_host, 1); } static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm) @@ -3039,7 +2931,7 @@ static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); /* Setting the abort bit in the Task Context is required by the silicon. */ - sci_req->task_context_buffer->abort = 1; + sci_req->tc->abort = 1; } static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) @@ -3069,7 +2961,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completio static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) { struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); - struct scu_task_context *task_context; + struct scu_task_context *tc = sci_req->tc; struct host_to_dev_fis *h2d_fis; enum sci_status status; @@ -3078,9 +2970,7 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet h2d_fis->control = 0; /* Clear the TC control bit */ - task_context = scic_sds_controller_get_task_context_buffer( - sci_req->owning_controller, sci_req->io_tag); - task_context->control_frame = 0; + tc->control_frame = 0; status = scic_controller_continue_io(sci_req); WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n"); @@ -3141,18 +3031,10 @@ scic_sds_general_request_construct(struct scic_sds_controller *scic, sci_req->sci_status = SCI_SUCCESS; sci_req->scu_status = 0; sci_req->post_context = 0xFFFFFFFF; + sci_req->tc = &scic->task_context_table[ISCI_TAG_TCI(io_tag)]; sci_req->is_task_management_request = false; - - if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG) { - sci_req->was_tag_assigned_by_user = false; - sci_req->task_context_buffer = &sci_req->tc; - } else { - sci_req->was_tag_assigned_by_user = true; - - sci_req->task_context_buffer = - scic_sds_controller_get_task_context_buffer(scic, io_tag); - } + WARN_ONCE(io_tag == SCI_CONTROLLER_INVALID_IO_TAG, "straggling invalid tag usage\n"); } static enum sci_status @@ -3178,8 +3060,7 @@ scic_io_request_construct(struct scic_sds_controller *scic, else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; - memset(sci_req->task_context_buffer, 0, - offsetof(struct scu_task_context, sgl_pair_ab)); + memset(sci_req->tc, 0, offsetof(struct scu_task_context, sgl_pair_ab)); return status; } @@ -3197,7 +3078,7 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { sci_req->is_task_management_request = true; - memset(sci_req->task_context_buffer, 0, sizeof(struct scu_task_context)); + memset(sci_req->tc, 0, sizeof(struct scu_task_context)); } else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; @@ -3299,7 +3180,7 @@ scic_io_request_construct_smp(struct device *dev, /* byte swap the smp request. */ - task_context = scic_sds_request_get_task_context(sci_req); + task_context = sci_req->tc; sci_dev = scic_sds_request_get_device(sci_req); sci_port = scic_sds_request_get_port(sci_req); @@ -3354,33 +3235,12 @@ scic_io_request_construct_smp(struct device *dev, */ task_context->task_phase = 0; - if (sci_req->was_tag_assigned_by_user) { - /* - * Build the task context now since we have already read - * the data - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(scic) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(sci_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(sci_req->io_tag)); - } else { - /* - * Build the task context now since we have already read - * the data. - * I/O tag index is not assigned because we have to wait - * until we get a TCi. - */ - sci_req->post_context = - (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(scic) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(sci_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT)); - } - + sci_req->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (scic_sds_controller_get_protocol_engine_group(scic) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(sci_port) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(sci_req->io_tag)); /* * Copy the physical address for the command buffer to the SCU Task * Context command buffer should not contain command header. @@ -3431,10 +3291,10 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) * * SCI_SUCCESS on successfull completion, or specific failure code. */ -static enum sci_status isci_io_request_build( - struct isci_host *isci_host, - struct isci_request *request, - struct isci_remote_device *isci_device) +static enum sci_status isci_io_request_build(struct isci_host *isci_host, + struct isci_request *request, + struct isci_remote_device *isci_device, + u16 tag) { enum sci_status status = SCI_SUCCESS; struct sas_task *task = isci_request_access_task(request); @@ -3471,8 +3331,7 @@ static enum sci_status isci_io_request_build( * we will let the core allocate the IO tag. */ status = scic_io_request_construct(&isci_host->sci, sci_device, - SCI_CONTROLLER_INVALID_IO_TAG, - &request->sci); + tag, &request->sci); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -3564,7 +3423,7 @@ struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, } int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, - struct sas_task *task, gfp_t gfp_flags) + struct sas_task *task, u16 tag, gfp_t gfp_flags) { enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; struct isci_request *ireq; @@ -3576,7 +3435,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide if (!ireq) goto out; - status = isci_io_request_build(ihost, ireq, idev); + status = isci_io_request_build(ihost, ireq, idev, tag); if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, "%s: request_construct failed - status = 0x%x\n", @@ -3599,18 +3458,16 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide */ status = scic_controller_start_task(&ihost->sci, &idev->sci, - &ireq->sci, - SCI_CONTROLLER_INVALID_IO_TAG); + &ireq->sci); } else { status = SCI_FAILURE; } } else { - /* send the request, let the core assign the IO TAG. */ status = scic_controller_start_io(&ihost->sci, &idev->sci, - &ireq->sci, - SCI_CONTROLLER_INVALID_IO_TAG); + &ireq->sci); } + if (status != SCI_SUCCESS && status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { dev_warn(&ihost->pdev->dev, @@ -3647,23 +3504,23 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide if (status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { /* Signal libsas that we need the SCSI error - * handler thread to work on this I/O and that - * we want a device reset. - */ + * handler thread to work on this I/O and that + * we want a device reset. + */ spin_lock_irqsave(&task->task_state_lock, flags); task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; spin_unlock_irqrestore(&task->task_state_lock, flags); /* Cause this task to be scheduled in the SCSI error - * handler thread. - */ + * handler thread. + */ isci_execpath_callback(ihost, task, sas_task_abort); /* Change the status, since we are holding - * the I/O until it is managed by the SCSI - * error handler. - */ + * the I/O until it is managed by the SCSI + * error handler. + */ status = SCI_SUCCESS; } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 9130f22..8c77c4c 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -136,7 +136,7 @@ struct scic_sds_stp_request { u8 ending_error; struct scic_sds_request_pio_sgl { - struct scu_sgl_element_pair *sgl_pair; + int sgl_index; u8 sgl_set; u32 sgl_offset; } request_current; @@ -172,12 +172,6 @@ struct scic_sds_request { struct scic_sds_remote_device *target_device; /* - * This field is utilized to determine if the SCI user is managing - * the IO tag for this request or if the core is managing it. - */ - bool was_tag_assigned_by_user; - - /* * This field indicates the IO tag for this request. The IO tag is * comprised of the task_index and a sequence count. The sequence count * is utilized to help identify tasks from one life to another. @@ -209,8 +203,7 @@ struct scic_sds_request { */ u32 post_context; - struct scu_task_context *task_context_buffer; - struct scu_task_context tc ____cacheline_aligned; + struct scu_task_context *tc; /* could be larger with sg chaining */ #define SCU_SGL_SIZE ((SCI_MAX_SCATTER_GATHER_ELEMENTS + 1) / 2) @@ -465,35 +458,6 @@ enum sci_base_request_states { (request)->sci_status = (sci_status_code); \ } -/** - * SCU_SGL_ZERO() - - * - * This macro zeros the hardware SGL element data - */ -#define SCU_SGL_ZERO(scu_sge) \ - { \ - (scu_sge).length = 0; \ - (scu_sge).address_lower = 0; \ - (scu_sge).address_upper = 0; \ - (scu_sge).address_modifier = 0; \ - } - -/** - * SCU_SGL_COPY() - - * - * This macro copys the SGL Element data from the host os to the hardware SGL - * elment data - */ -#define SCU_SGL_COPY(scu_sge, os_sge) \ - { \ - (scu_sge).length = sg_dma_len(sg); \ - (scu_sge).address_upper = \ - upper_32_bits(sg_dma_address(sg)); \ - (scu_sge).address_lower = \ - lower_32_bits(sg_dma_address(sg)); \ - (scu_sge).address_modifier = 0; \ - } - enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req); enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *sci_req); enum sci_status @@ -510,22 +474,6 @@ extern enum sci_status scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, u32 code); /* XXX open code in caller */ -static inline void *scic_request_get_virt_addr(struct scic_sds_request *sci_req, - dma_addr_t phys_addr) -{ - struct isci_request *ireq = sci_req_to_ireq(sci_req); - dma_addr_t offset; - - BUG_ON(phys_addr < ireq->request_daddr); - - offset = phys_addr - ireq->request_daddr; - - BUG_ON(offset >= sizeof(*ireq)); - - return (char *)ireq + offset; -} - -/* XXX open code in caller */ static inline dma_addr_t scic_io_request_get_dma_addr(struct scic_sds_request *sci_req, void *virt_addr) { @@ -672,7 +620,7 @@ struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, struct isci_tmf *isci_tmf, gfp_t gfp_flags); int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, - struct sas_task *task, gfp_t gfp_flags); + struct sas_task *task, u16 tag, gfp_t gfp_flags); void isci_terminate_pending_requests(struct isci_host *ihost, struct isci_remote_device *idev); enum sci_status diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 157e997..22f6fe1 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -63,6 +63,7 @@ #include "request.h" #include "sata.h" #include "task.h" +#include "host.h" /** * isci_task_refuse() - complete the request to the upper layer driver in @@ -156,25 +157,19 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) { struct isci_host *ihost = dev_to_ihost(task->dev); struct isci_remote_device *idev; - enum sci_status status; unsigned long flags; bool io_ready; - int ret; + u16 tag; dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num); - /* Check if we have room for more tasks */ - ret = isci_host_can_queue(ihost, num); - - if (ret) { - dev_warn(&ihost->pdev->dev, "%s: queue full\n", __func__); - return ret; - } - for_each_sas_task(num, task) { + enum sci_status status = SCI_FAILURE; + spin_lock_irqsave(&ihost->scic_lock, flags); idev = isci_lookup_device(task->dev); io_ready = isci_device_io_ready(idev, task); + tag = isci_alloc_tag(ihost); spin_unlock_irqrestore(&ihost->scic_lock, flags); dev_dbg(&ihost->pdev->dev, @@ -185,15 +180,12 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) if (!idev) { isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED, SAS_DEVICE_UNKNOWN); - isci_host_can_dequeue(ihost, 1); - } else if (!io_ready) { - + } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) { /* Indicate QUEUE_FULL so that the scsi midlayer * retries. */ isci_task_refuse(ihost, task, SAS_TASK_COMPLETE, SAS_QUEUE_FULL); - isci_host_can_dequeue(ihost, 1); } else { /* There is a device and it's ready for I/O. */ spin_lock_irqsave(&task->task_state_lock, flags); @@ -206,13 +198,12 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED, SAM_STAT_TASK_ABORTED); - isci_host_can_dequeue(ihost, 1); } else { task->task_state_flags |= SAS_TASK_AT_INITIATOR; spin_unlock_irqrestore(&task->task_state_lock, flags); /* build and send the request. */ - status = isci_request_execute(ihost, idev, task, gfp_flags); + status = isci_request_execute(ihost, idev, task, tag, gfp_flags); if (status != SCI_SUCCESS) { @@ -231,10 +222,17 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) isci_task_refuse(ihost, task, SAS_TASK_COMPLETE, SAS_QUEUE_FULL); - isci_host_can_dequeue(ihost, 1); } } } + if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) { + spin_lock_irqsave(&ihost->scic_lock, flags); + /* command never hit the device, so just free + * the tci and skip the sequence increment + */ + isci_tci_free(ihost, ISCI_TAG_TCI(tag)); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } isci_put_device(idev); } return 0; @@ -242,7 +240,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) static struct isci_request *isci_task_request_build(struct isci_host *ihost, struct isci_remote_device *idev, - struct isci_tmf *isci_tmf) + u16 tag, struct isci_tmf *isci_tmf) { enum sci_status status = SCI_FAILURE; struct isci_request *ireq = NULL; @@ -259,8 +257,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return NULL; /* let the core do it's construct. */ - status = scic_task_request_construct(&ihost->sci, &idev->sci, - SCI_CONTROLLER_INVALID_IO_TAG, + status = scic_task_request_construct(&ihost->sci, &idev->sci, tag, &ireq->sci); if (status != SCI_SUCCESS) { @@ -290,8 +287,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return ireq; errout: isci_request_free(ihost, ireq); - ireq = NULL; - return ireq; + return NULL; } int isci_task_execute_tmf(struct isci_host *ihost, @@ -305,6 +301,14 @@ int isci_task_execute_tmf(struct isci_host *ihost, int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; unsigned long timeleft; + u16 tag; + + spin_lock_irqsave(&ihost->scic_lock, flags); + tag = isci_alloc_tag(ihost); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (tag == SCI_CONTROLLER_INVALID_IO_TAG) + return ret; /* sanity check, return TMF_RESP_FUNC_FAILED * if the device is not there and ready. @@ -316,7 +320,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, "%s: isci_device = %p not ready (%#lx)\n", __func__, isci_device, isci_device ? isci_device->flags : 0); - return TMF_RESP_FUNC_FAILED; + goto err_tci; } else dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", @@ -327,22 +331,16 @@ int isci_task_execute_tmf(struct isci_host *ihost, /* Assign the pointer to the TMF's completion kernel wait structure. */ tmf->complete = &completion; - ireq = isci_task_request_build(ihost, isci_device, tmf); - if (!ireq) { - dev_warn(&ihost->pdev->dev, - "%s: isci_task_request_build failed\n", - __func__); - return TMF_RESP_FUNC_FAILED; - } + ireq = isci_task_request_build(ihost, isci_device, tag, tmf); + if (!ireq) + goto err_tci; spin_lock_irqsave(&ihost->scic_lock, flags); /* start the TMF io. */ - status = scic_controller_start_task( - &ihost->sci, - sci_device, - &ireq->sci, - SCI_CONTROLLER_INVALID_IO_TAG); + status = scic_controller_start_task(&ihost->sci, + sci_device, + &ireq->sci); if (status != SCI_TASK_SUCCESS) { dev_warn(&ihost->pdev->dev, @@ -351,8 +349,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, status, ireq); spin_unlock_irqrestore(&ihost->scic_lock, flags); - isci_request_free(ihost, ireq); - return ret; + goto err_ireq; } if (tmf->cb_state_func != NULL) @@ -403,6 +400,15 @@ int isci_task_execute_tmf(struct isci_host *ihost, ireq); return ret; + + err_ireq: + isci_request_free(ihost, ireq); + err_tci: + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_tci_free(ihost, ISCI_TAG_TCI(tag)); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + return ret; } void isci_task_build_tmf( -- cgit v0.10.2 From 38d8879baeb61b6946052739e7c03fa79b3a57f0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 23 Jun 2011 14:33:48 -0700 Subject: isci: combine request flags Combine three bools into one unsigned long 'flags'. Doesn't increase the request size due to packing. (to do: optimize the structure layout). Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 55859d5..27376ba 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2183,7 +2183,7 @@ static void isci_request_set_open_reject_status( enum sas_open_rej_reason open_rej_reason) { /* Task in the target is done. */ - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); *response_ptr = SAS_TASK_UNDELIVERED; *status_ptr = SAS_OPEN_REJECT; *complete_to_host_ptr = isci_perform_normal_io_completion; @@ -2248,7 +2248,7 @@ static void isci_request_handle_controller_specific_errors( else *status_ptr = SAS_ABORTED_TASK; - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); *complete_to_host_ptr = isci_perform_normal_io_completion; @@ -2261,7 +2261,7 @@ static void isci_request_handle_controller_specific_errors( else *status_ptr = SAM_STAT_TASK_ABORTED; - request->complete_in_target = false; + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); *complete_to_host_ptr = isci_perform_error_io_completion; @@ -2292,7 +2292,7 @@ static void isci_request_handle_controller_specific_errors( else *status_ptr = SAS_ABORTED_TASK; - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); *complete_to_host_ptr = isci_perform_normal_io_completion; break; @@ -2397,11 +2397,11 @@ static void isci_request_handle_controller_specific_errors( *status_ptr = SAM_STAT_TASK_ABORTED; if (task->task_proto == SAS_PROTOCOL_SMP) { - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); *complete_to_host_ptr = isci_perform_normal_io_completion; } else { - request->complete_in_target = false; + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); *complete_to_host_ptr = isci_perform_error_io_completion; } @@ -2552,7 +2552,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * * The target is still there (since the TMF was successful). */ - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); response = SAS_TASK_COMPLETE; /* See if the device has been/is being stopped. Note @@ -2579,7 +2579,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * Aborting also means an external thread is explicitly managing * this request, so that we do not complete it up the stack. */ - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); response = SAS_TASK_UNDELIVERED; if (!idev) @@ -2605,7 +2605,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * the device (reset, tear down, etc.), and the I/O needs * to be completed up the stack. */ - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); response = SAS_TASK_UNDELIVERED; /* See if the device has been/is being stopped. Note @@ -2675,7 +2675,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, /* use the task status set in the task struct by the * isci_request_process_response_iu call. */ - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); response = task->task_status.resp; status = task->task_status.stat; break; @@ -2685,7 +2685,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, response = SAS_TASK_COMPLETE; status = SAM_STAT_GOOD; - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); if (task->task_proto == SAS_PROTOCOL_SMP) { void *rsp = &request->sci.smp.rsp; @@ -2737,7 +2737,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, /* The request was terminated explicitly. No handling * is needed in the SCSI error handler path. */ - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); response = SAS_TASK_UNDELIVERED; /* See if the device has been/is being stopped. Note @@ -2777,7 +2777,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, status = SAM_STAT_TASK_ABORTED; complete_to_host = isci_perform_error_io_completion; - request->complete_in_target = false; + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); break; case SCI_FAILURE_RETRY_REQUIRED: @@ -2790,7 +2790,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, status = SAS_ABORTED_TASK; complete_to_host = isci_perform_normal_io_completion; - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); break; @@ -2813,10 +2813,10 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, status = SAS_ABORTED_TASK; if (SAS_PROTOCOL_SMP == task->task_proto) { - request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); complete_to_host = isci_perform_normal_io_completion; } else { - request->complete_in_target = false; + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); complete_to_host = isci_perform_error_io_completion; } break; @@ -2870,7 +2870,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * terminated again, and to cause any calls into abort * task to recognize the already completed case. */ - request->terminated = true; + set_bit(IREQ_TERMINATED, &request->flags); } static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm) @@ -2919,7 +2919,7 @@ static void scic_sds_request_completed_state_enter(struct sci_base_state_machine struct isci_request *ireq = sci_req_to_ireq(sci_req); /* Tell the SCI_USER that the IO request is complete */ - if (sci_req->is_task_management_request == false) + if (!test_bit(IREQ_TMF, &ireq->flags)) isci_request_io_request_complete(ihost, ireq, sci_req->sci_status); else @@ -3032,8 +3032,6 @@ scic_sds_general_request_construct(struct scic_sds_controller *scic, sci_req->scu_status = 0; sci_req->post_context = 0xFFFFFFFF; sci_req->tc = &scic->task_context_table[ISCI_TAG_TCI(io_tag)]; - - sci_req->is_task_management_request = false; WARN_ONCE(io_tag == SCI_CONTROLLER_INVALID_IO_TAG, "straggling invalid tag usage\n"); } @@ -3077,7 +3075,7 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { - sci_req->is_task_management_request = true; + set_bit(IREQ_TMF, &sci_req_to_ireq(sci_req)->flags); memset(sci_req->tc, 0, sizeof(struct scu_task_context)); } else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; @@ -3379,12 +3377,8 @@ static struct isci_request *isci_request_alloc_core(struct isci_host *ihost, ireq->request_daddr = handle; ireq->isci_host = ihost; ireq->io_request_completion = NULL; - ireq->terminated = false; - + ireq->flags = 0; ireq->num_sg_entries = 0; - - ireq->complete_in_target = false; - INIT_LIST_HEAD(&ireq->completed_node); INIT_LIST_HEAD(&ireq->dev_node); @@ -3496,7 +3490,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide * hardware, so clear the request handle * here so no terminations will be done. */ - ireq->terminated = true; + set_bit(IREQ_TERMINATED, &ireq->flags); isci_request_change_state(ireq, completed); } spin_unlock_irqrestore(&ihost->scic_lock, flags); diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 8c77c4c..f440e42 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -210,12 +210,6 @@ struct scic_sds_request { struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); /* - * This field indicates if this request is a task management request or - * normal IO request. - */ - bool is_task_management_request; - - /* * This field is a pointer to the stored rx frame data. It is used in * STP internal requests and SMP response frames. If this field is * non-NULL the saved frame must be released on IO request completion. @@ -260,8 +254,10 @@ struct isci_request { enum isci_request_status status; enum task_type ttype; unsigned short io_tag; - bool complete_in_target; - bool terminated; + #define IREQ_COMPLETE_IN_TARGET 0 + #define IREQ_TERMINATED 1 + #define IREQ_TMF 2 + unsigned long flags; union ttype_ptr_union { struct sas_task *io_task_ptr; /* When ttype==io_task */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 22f6fe1..d1a4671 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -558,15 +558,15 @@ static void isci_terminate_request_core( : NULL; /* Note that we are not going to control - * the target to abort the request. - */ - isci_request->complete_in_target = true; + * the target to abort the request. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &isci_request->flags); /* Make sure the request wasn't just sitting around signalling * device condition (if the request handle is NULL, then the * request completed but needed additional handling here). */ - if (!isci_request->terminated) { + if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { was_terminated = true; needs_cleanup_handling = true; status = scic_controller_terminate_request( @@ -609,7 +609,7 @@ static void isci_terminate_request_core( flags); /* Check for state changes. */ - if (!isci_request->terminated) { + if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { /* The best we can do is to have the * request die a silent death if it @@ -1098,9 +1098,8 @@ int isci_task_abort_task(struct sas_task *task) ret = TMF_RESP_FUNC_COMPLETE; goto out; } - if ((task->task_proto == SAS_PROTOCOL_SMP) - || old_request->complete_in_target - ) { + if (task->task_proto == SAS_PROTOCOL_SMP || + test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { spin_unlock_irqrestore(&isci_host->scic_lock, flags); @@ -1108,7 +1107,7 @@ int isci_task_abort_task(struct sas_task *task) "%s: SMP request (%d)" " or complete_in_target (%d), thus no TMF\n", __func__, (task->task_proto == SAS_PROTOCOL_SMP), - old_request->complete_in_target); + test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)); /* Set the state on the task. */ isci_task_all_done(task); @@ -1136,7 +1135,7 @@ int isci_task_abort_task(struct sas_task *task) __func__); } if (ret == TMF_RESP_FUNC_COMPLETE) { - old_request->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags); /* Clean up the request on our side, and wait for the aborted * I/O to complete. @@ -1252,7 +1251,7 @@ isci_task_request_complete(struct isci_host *ihost, isci_request_change_state(ireq, completed); tmf->status = completion_status; - ireq->complete_in_target = true; + set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags); if (tmf->proto == SAS_PROTOCOL_SSP) { memcpy(&tmf->resp.resp_iu, @@ -1271,7 +1270,7 @@ isci_task_request_complete(struct isci_host *ihost, /* set the 'terminated' flag handle to make sure it cannot be terminated * or completed again. */ - ireq->terminated = true;; + set_bit(IREQ_TERMINATED, &ireq->flags); isci_request_change_state(ireq, unallocated); list_del_init(&ireq->dev_node); -- cgit v0.10.2 From db0562509800a2d4cb5cb14a66413c30484f165c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 17 Jun 2011 14:18:39 -0700 Subject: isci: preallocate requests the dma_pool interface is optimized for object_size << page_size which is not the case with isci_request objects and the dma_pool routines show up in the top of the profile. The old io_request_table which tracked whether tci slots were in-flight or not is replaced with an IREQ_ACTIVE flag per request. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index c99fab5..0884ae3 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -255,14 +255,14 @@ static bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) static void scic_sds_controller_task_completion(struct scic_sds_controller *scic, u32 completion_entry) { - u32 index; - struct scic_sds_request *sci_req; - - index = SCU_GET_COMPLETION_INDEX(completion_entry); - sci_req = scic->io_request_table[index]; + u32 index = SCU_GET_COMPLETION_INDEX(completion_entry); + struct isci_host *ihost = scic_to_ihost(scic); + struct isci_request *ireq = ihost->reqs[index]; + struct scic_sds_request *sci_req = &ireq->sci; /* Make sure that we really want to process this IO request */ - if (sci_req && sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && + if (test_bit(IREQ_ACTIVE, &ireq->flags) && + sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && ISCI_TAG_SEQ(sci_req->io_tag) == scic->io_request_sequence[index]) /* Yep this is a valid io request pass it along to the io request handler */ scic_sds_io_request_tc_completion(sci_req, completion_entry); @@ -280,7 +280,7 @@ static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic switch (scu_get_command_request_type(completion_entry)) { case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: - io_request = scic->io_request_table[index]; + io_request = &scic_to_ihost(scic)->reqs[index]->sci; dev_warn(scic_to_dev(scic), "%s: SCIC SDS Completion type SDMA %x for io request " "%p\n", @@ -418,7 +418,7 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci break; case SCU_EVENT_TYPE_TRANSPORT_ERROR: - io_request = scic->io_request_table[index]; + io_request = &ihost->reqs[index]->sci; scic_sds_io_request_event_handler(io_request, completion_entry); break; @@ -426,7 +426,7 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci switch (scu_get_event_specifier(completion_entry)) { case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: - io_request = scic->io_request_table[index]; + io_request = &ihost->reqs[index]->sci; if (io_request != NULL) scic_sds_io_request_event_handler(io_request, completion_entry); else @@ -1187,9 +1187,6 @@ static void isci_host_completion_routine(unsigned long data) spin_lock_irq(&isci_host->scic_lock); isci_free_tag(isci_host, request->sci.io_tag); spin_unlock_irq(&isci_host->scic_lock); - - /* Free the request object. */ - isci_request_free(isci_host, request); } list_for_each_entry_safe(request, next_request, &errored_request_list, completed_node) { @@ -1227,9 +1224,6 @@ static void isci_host_completion_routine(unsigned long data) list_del_init(&request->dev_node); isci_free_tag(isci_host, request->sci.io_tag); spin_unlock_irq(&isci_host->scic_lock); - - /* Free the request object. */ - isci_request_free(isci_host, request); } } @@ -2469,13 +2463,6 @@ int isci_host_init(struct isci_host *isci_host) if (err) return err; - isci_host->dma_pool = dmam_pool_create(DRV_NAME, &isci_host->pdev->dev, - sizeof(struct isci_request), - SLAB_HWCACHE_ALIGN, 0); - - if (!isci_host->dma_pool) - return -ENOMEM; - for (i = 0; i < SCI_MAX_PORTS; i++) isci_port_init(&isci_host->ports[i], isci_host, i); @@ -2489,6 +2476,25 @@ int isci_host_init(struct isci_host *isci_host) INIT_LIST_HEAD(&idev->node); } + for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) { + struct isci_request *ireq; + dma_addr_t dma; + + ireq = dmam_alloc_coherent(&isci_host->pdev->dev, + sizeof(struct isci_request), &dma, + GFP_KERNEL); + if (!ireq) + return -ENOMEM; + + ireq->sci.tc = &isci_host->sci.task_context_table[i]; + ireq->sci.owning_controller = &isci_host->sci; + spin_lock_init(&ireq->state_lock); + ireq->request_daddr = dma; + ireq->isci_host = isci_host; + + isci_host->reqs[i] = ireq; + } + return 0; } @@ -2602,12 +2608,13 @@ struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, u task_index = ISCI_TAG_TCI(io_tag); if (task_index < scic->task_context_entries) { - if (scic->io_request_table[task_index] != NULL) { + struct isci_request *ireq = scic_to_ihost(scic)->reqs[task_index]; + + if (test_bit(IREQ_ACTIVE, &ireq->flags)) { task_sequence = ISCI_TAG_SEQ(io_tag); - if (task_sequence == scic->io_request_sequence[task_index]) { - return scic->io_request_table[task_index]; - } + if (task_sequence == scic->io_request_sequence[task_index]) + return &ireq->sci; } } @@ -2820,7 +2827,7 @@ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, if (status != SCI_SUCCESS) return status; - scic->io_request_table[ISCI_TAG_TCI(req->io_tag)] = req; + set_bit(IREQ_ACTIVE, &sci_req_to_ireq(req)->flags); scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); return SCI_SUCCESS; } @@ -2897,7 +2904,7 @@ enum sci_status scic_controller_complete_io( return status; index = ISCI_TAG_TCI(request->io_tag); - scic->io_request_table[index] = NULL; + clear_bit(IREQ_ACTIVE, &sci_req_to_ireq(request)->flags); return SCI_SUCCESS; default: dev_warn(scic_to_dev(scic), "invalid state to complete I/O"); @@ -2915,7 +2922,7 @@ enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) return SCI_FAILURE_INVALID_STATE; } - scic->io_request_table[ISCI_TAG_TCI(sci_req->io_tag)] = sci_req; + set_bit(IREQ_ACTIVE, &sci_req_to_ireq(sci_req)->flags); scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req)); return SCI_SUCCESS; } @@ -2934,6 +2941,7 @@ enum sci_task_status scic_controller_start_task( struct scic_sds_remote_device *rdev, struct scic_sds_request *req) { + struct isci_request *ireq = sci_req_to_ireq(req); enum sci_status status; if (scic->sm.current_state_id != SCIC_READY) { @@ -2947,7 +2955,7 @@ enum sci_task_status scic_controller_start_task( status = scic_sds_remote_device_start_task(scic, rdev, req); switch (status) { case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: - scic->io_request_table[ISCI_TAG_TCI(req->io_tag)] = req; + set_bit(IREQ_ACTIVE, &ireq->flags); /* * We will let framework know this task request started successfully, @@ -2956,7 +2964,7 @@ enum sci_task_status scic_controller_start_task( */ return SCI_SUCCESS; case SCI_SUCCESS: - scic->io_request_table[ISCI_TAG_TCI(req->io_tag)] = req; + set_bit(IREQ_ACTIVE, &ireq->flags); scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index d8164f5..446fade 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -166,14 +166,6 @@ struct scic_sds_controller { struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; /** - * This field is the array of IO request objects that are currently active for - * this controller object. This table is used as a fast lookup of the io - * request object that need to handle completion queue notifications. The - * table is TCi based. - */ - struct scic_sds_request *io_request_table[SCI_MAX_IO_REQUESTS]; - - /** * This field is the free RNi data structure */ struct scic_remote_node_table available_remote_nodes; @@ -298,7 +290,6 @@ struct isci_host { union scic_oem_parameters oem_parameters; int id; /* unique within a given pci device */ - struct dma_pool *dma_pool; struct isci_phy phys[SCI_MAX_PHYS]; struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ struct sas_ha_struct sas_ha; @@ -315,7 +306,7 @@ struct isci_host { struct list_head requests_to_complete; struct list_head requests_to_errorback; spinlock_t scic_lock; - + struct isci_request *reqs[SCI_MAX_IO_REQUESTS]; struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES]; }; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index c5ce0f0..5a86bb1 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -136,16 +136,19 @@ static void rnc_destruct_done(void *_dev) static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds_remote_device *sci_dev) { struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + struct isci_host *ihost = scic_to_ihost(scic); u32 i, request_count = sci_dev->started_request_count; enum sci_status status = SCI_SUCCESS; for (i = 0; i < SCI_MAX_IO_REQUESTS && i < request_count; i++) { - struct scic_sds_request *sci_req; + struct isci_request *ireq = ihost->reqs[i]; + struct scic_sds_request *sci_req = &ireq->sci; enum sci_status s; - sci_req = scic->io_request_table[i]; - if (!sci_req || sci_req->target_device != sci_dev) + if (!test_bit(IREQ_ACTIVE, &ireq->flags) || + sci_req->target_device != sci_dev) continue; + s = scic_controller_terminate_request(scic, sci_dev, sci_req); if (s != SCI_SUCCESS) status = s; diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 27376ba..3c7ed4e 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -3017,13 +3017,10 @@ static const struct sci_base_state scic_sds_request_state_table[] = { static void scic_sds_general_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - u16 io_tag, struct scic_sds_request *sci_req) { sci_init_sm(&sci_req->sm, scic_sds_request_state_table, SCI_REQ_INIT); - sci_req->io_tag = io_tag; - sci_req->owning_controller = scic; sci_req->target_device = sci_dev; sci_req->protocol = SCIC_NO_PROTOCOL; sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; @@ -3031,20 +3028,18 @@ scic_sds_general_request_construct(struct scic_sds_controller *scic, sci_req->sci_status = SCI_SUCCESS; sci_req->scu_status = 0; sci_req->post_context = 0xFFFFFFFF; - sci_req->tc = &scic->task_context_table[ISCI_TAG_TCI(io_tag)]; - WARN_ONCE(io_tag == SCI_CONTROLLER_INVALID_IO_TAG, "straggling invalid tag usage\n"); } static enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - u16 io_tag, struct scic_sds_request *sci_req) + struct scic_sds_request *sci_req) { struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); + scic_sds_general_request_construct(scic, sci_dev, sci_req); if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; @@ -3071,7 +3066,7 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, io_tag, sci_req); + scic_sds_general_request_construct(scic, sci_dev, sci_req); if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { @@ -3291,8 +3286,7 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) */ static enum sci_status isci_io_request_build(struct isci_host *isci_host, struct isci_request *request, - struct isci_remote_device *isci_device, - u16 tag) + struct isci_remote_device *isci_device) { enum sci_status status = SCI_SUCCESS; struct sas_task *task = isci_request_access_task(request); @@ -3325,11 +3319,8 @@ static enum sci_status isci_io_request_build(struct isci_host *isci_host, return SCI_FAILURE_INSUFFICIENT_RESOURCES; } - /* build the common request object. For now, - * we will let the core allocate the IO tag. - */ status = scic_io_request_construct(&isci_host->sci, sci_device, - tag, &request->sci); + &request->sci); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -3359,65 +3350,51 @@ static enum sci_status isci_io_request_build(struct isci_host *isci_host, return SCI_SUCCESS; } -static struct isci_request *isci_request_alloc_core(struct isci_host *ihost, - gfp_t gfp_flags) +static struct isci_request *isci_request_from_tag(struct isci_host *ihost, u16 tag) { - dma_addr_t handle; struct isci_request *ireq; - ireq = dma_pool_alloc(ihost->dma_pool, gfp_flags, &handle); - if (!ireq) { - dev_warn(&ihost->pdev->dev, - "%s: dma_pool_alloc returned NULL\n", __func__); - return NULL; - } - - /* initialize the request object. */ - spin_lock_init(&ireq->state_lock); - ireq->request_daddr = handle; - ireq->isci_host = ihost; + ireq = ihost->reqs[ISCI_TAG_TCI(tag)]; + ireq->sci.io_tag = tag; ireq->io_request_completion = NULL; ireq->flags = 0; ireq->num_sg_entries = 0; INIT_LIST_HEAD(&ireq->completed_node); INIT_LIST_HEAD(&ireq->dev_node); - isci_request_change_state(ireq, allocated); return ireq; } -static struct isci_request *isci_request_alloc_io(struct isci_host *ihost, - struct sas_task *task, - gfp_t gfp_flags) +static struct isci_request *isci_io_request_from_tag(struct isci_host *ihost, + struct sas_task *task, + u16 tag) { struct isci_request *ireq; - ireq = isci_request_alloc_core(ihost, gfp_flags); - if (ireq) { - ireq->ttype_ptr.io_task_ptr = task; - ireq->ttype = io_task; - task->lldd_task = ireq; - } + ireq = isci_request_from_tag(ihost, tag); + ireq->ttype_ptr.io_task_ptr = task; + ireq->ttype = io_task; + task->lldd_task = ireq; + return ireq; } -struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, - struct isci_tmf *isci_tmf, - gfp_t gfp_flags) +struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + u16 tag) { struct isci_request *ireq; - ireq = isci_request_alloc_core(ihost, gfp_flags); - if (ireq) { - ireq->ttype_ptr.tmf_task_ptr = isci_tmf; - ireq->ttype = tmf_task; - } + ireq = isci_request_from_tag(ihost, tag); + ireq->ttype_ptr.tmf_task_ptr = isci_tmf; + ireq->ttype = tmf_task; + return ireq; } int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, - struct sas_task *task, u16 tag, gfp_t gfp_flags) + struct sas_task *task, u16 tag) { enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; struct isci_request *ireq; @@ -3425,17 +3402,15 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide int ret = 0; /* do common allocation and init of request object. */ - ireq = isci_request_alloc_io(ihost, task, gfp_flags); - if (!ireq) - goto out; + ireq = isci_io_request_from_tag(ihost, task, tag); - status = isci_io_request_build(ihost, ireq, idev, tag); + status = isci_io_request_build(ihost, ireq, idev); if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, "%s: request_construct failed - status = 0x%x\n", __func__, status); - goto out; + return status; } spin_lock_irqsave(&ihost->scic_lock, flags); @@ -3468,7 +3443,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide "%s: failed request start (0x%x)\n", __func__, status); spin_unlock_irqrestore(&ihost->scic_lock, flags); - goto out; + return status; } /* Either I/O started OK, or the core has signaled that @@ -3518,13 +3493,5 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide status = SCI_SUCCESS; } - out: - if (status != SCI_SUCCESS) { - /* release dma memory on failure. */ - isci_request_free(ihost, ireq); - ireq = NULL; - ret = SCI_FAILURE; - } - return ret; } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index f440e42..7628dec 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -257,6 +257,7 @@ struct isci_request { #define IREQ_COMPLETE_IN_TARGET 0 #define IREQ_TERMINATED 1 #define IREQ_TMF 2 + #define IREQ_ACTIVE 3 unsigned long flags; union ttype_ptr_union { @@ -590,33 +591,16 @@ isci_request_change_started_to_aborted(struct isci_request *isci_request, completion_ptr, aborted); } -/** - * isci_request_free() - This function frees the request object. - * @isci_host: This parameter specifies the ISCI host object - * @isci_request: This parameter points to the isci_request object - * - */ -static inline void isci_request_free(struct isci_host *isci_host, - struct isci_request *isci_request) -{ - if (!isci_request) - return; - - /* release the dma memory if we fail. */ - dma_pool_free(isci_host->dma_pool, - isci_request, - isci_request->request_daddr); -} #define isci_request_access_task(req) ((req)->ttype_ptr.io_task_ptr) #define isci_request_access_tmf(req) ((req)->ttype_ptr.tmf_task_ptr) -struct isci_request *isci_request_alloc_tmf(struct isci_host *ihost, - struct isci_tmf *isci_tmf, - gfp_t gfp_flags); +struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + u16 tag); int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, - struct sas_task *task, u16 tag, gfp_t gfp_flags); + struct sas_task *task, u16 tag); void isci_terminate_pending_requests(struct isci_host *ihost, struct isci_remote_device *idev); enum sci_status diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index d1a4671..d2dba83 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -203,7 +203,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) spin_unlock_irqrestore(&task->task_state_lock, flags); /* build and send the request. */ - status = isci_request_execute(ihost, idev, task, tag, gfp_flags); + status = isci_request_execute(ihost, idev, task, tag); if (status != SCI_SUCCESS) { @@ -252,7 +252,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, dev = idev->domain_dev; /* do common allocation and init of request object. */ - ireq = isci_request_alloc_tmf(ihost, isci_tmf, GFP_ATOMIC); + ireq = isci_tmf_request_from_tag(ihost, isci_tmf, tag); if (!ireq) return NULL; @@ -266,7 +266,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, "status = 0x%x\n", __func__, status); - goto errout; + return NULL; } /* XXX convert to get this from task->tproto like other drivers */ @@ -274,7 +274,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, isci_tmf->proto = SAS_PROTOCOL_SSP; status = scic_task_request_construct_ssp(&ireq->sci); if (status != SCI_SUCCESS) - goto errout; + return NULL; } if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { @@ -282,12 +282,9 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, status = isci_sata_management_task_request_build(ireq); if (status != SCI_SUCCESS) - goto errout; + return NULL; } return ireq; - errout: - isci_request_free(ihost, ireq); - return NULL; } int isci_task_execute_tmf(struct isci_host *ihost, @@ -349,7 +346,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, status, ireq); spin_unlock_irqrestore(&ihost->scic_lock, flags); - goto err_ireq; + goto err_tci; } if (tmf->cb_state_func != NULL) @@ -401,8 +398,6 @@ int isci_task_execute_tmf(struct isci_host *ihost, return ret; - err_ireq: - isci_request_free(ihost, ireq); err_tci: spin_lock_irqsave(&ihost->scic_lock, flags); isci_tci_free(ihost, ISCI_TAG_TCI(tag)); @@ -516,8 +511,6 @@ static void isci_request_cleanup_completed_loiterer( spin_lock_irqsave(&isci_host->scic_lock, flags); list_del_init(&isci_request->dev_node); spin_unlock_irqrestore(&isci_host->scic_lock, flags); - - isci_request_free(isci_host, isci_request); } } -- cgit v0.10.2 From ba7cb22342a66505a831bb7e4541fef90e0193c9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 27 Jun 2011 11:56:41 -0700 Subject: isci: rename / clean up scic_sds_stp_request * Rename scic_sds_stp_request to isci_stp_request * Remove the unused fields and union indirection Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 3c7ed4e..8520626 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -433,24 +433,20 @@ static enum sci_status scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, bool copy_rx_frame) { - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; - struct scic_sds_stp_pio_request *pio = &stp_req->type.pio; + struct isci_stp_request *stp_req = &sci_req->stp.req; scu_stp_raw_request_construct_task_context(sci_req); - pio->current_transfer_bytes = 0; - pio->ending_error = 0; - pio->ending_status = 0; - - pio->request_current.sgl_offset = 0; - pio->request_current.sgl_set = SCU_SGL_ELEMENT_PAIR_A; + stp_req->status = 0; + stp_req->sgl.offset = 0; + stp_req->sgl.set = SCU_SGL_ELEMENT_PAIR_A; if (copy_rx_frame) { scic_sds_request_build_sgl(sci_req); - pio->request_current.sgl_index = 0; + stp_req->sgl.index = 0; } else { /* The user does not want the data copied to the SGL buffer location */ - pio->request_current.sgl_index = -1; + stp_req->sgl.index = -1; } return SCI_SUCCESS; @@ -1151,22 +1147,22 @@ void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *req, req->tc->type.stp.ncq_tag = ncq_tag; } -static struct scu_sgl_element *pio_sgl_next(struct scic_sds_stp_request *stp_req) +static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req) { struct scu_sgl_element *sgl; struct scu_sgl_element_pair *sgl_pair; struct scic_sds_request *sci_req = to_sci_req(stp_req); - struct scic_sds_request_pio_sgl *pio_sgl = &stp_req->type.pio.request_current; + struct isci_stp_pio_sgl *pio_sgl = &stp_req->sgl; - sgl_pair = to_sgl_element_pair(sci_req, pio_sgl->sgl_index); + sgl_pair = to_sgl_element_pair(sci_req, pio_sgl->index); if (!sgl_pair) sgl = NULL; - else if (pio_sgl->sgl_set == SCU_SGL_ELEMENT_PAIR_A) { + else if (pio_sgl->set == SCU_SGL_ELEMENT_PAIR_A) { if (sgl_pair->B.address_lower == 0 && sgl_pair->B.address_upper == 0) { sgl = NULL; } else { - pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_B; + pio_sgl->set = SCU_SGL_ELEMENT_PAIR_B; sgl = &sgl_pair->B; } } else { @@ -1174,9 +1170,9 @@ static struct scu_sgl_element *pio_sgl_next(struct scic_sds_stp_request *stp_req sgl_pair->next_pair_upper == 0) { sgl = NULL; } else { - pio_sgl->sgl_index++; - pio_sgl->sgl_set = SCU_SGL_ELEMENT_PAIR_A; - sgl_pair = to_sgl_element_pair(sci_req, pio_sgl->sgl_index); + pio_sgl->index++; + pio_sgl->set = SCU_SGL_ELEMENT_PAIR_A; + sgl_pair = to_sgl_element_pair(sci_req, pio_sgl->index); sgl = &sgl_pair->A; } } @@ -1221,7 +1217,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( struct scic_sds_request *sci_req, u32 length) { - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct isci_stp_request *stp_req = &sci_req->stp.req; struct scu_task_context *task_context = sci_req->tc; struct scu_sgl_element_pair *sgl_pair; struct scu_sgl_element *current_sgl; @@ -1229,8 +1225,8 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( /* Recycle the TC and reconstruct it for sending out DATA FIS containing * for the data from current_sgl+offset for the input length */ - sgl_pair = to_sgl_element_pair(sci_req, stp_req->type.pio.request_current.sgl_index); - if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) + sgl_pair = to_sgl_element_pair(sci_req, stp_req->sgl.index); + if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) current_sgl = &sgl_pair->A; else current_sgl = &sgl_pair->B; @@ -1247,54 +1243,48 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req) { - - struct scu_sgl_element *current_sgl; - u32 sgl_offset; - u32 remaining_bytes_in_current_sgl = 0; - enum sci_status status = SCI_SUCCESS; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct isci_stp_request *stp_req = &sci_req->stp.req; struct scu_sgl_element_pair *sgl_pair; + struct scu_sgl_element *sgl; + enum sci_status status; + u32 offset; + u32 len = 0; - sgl_offset = stp_req->type.pio.request_current.sgl_offset; - sgl_pair = to_sgl_element_pair(sci_req, stp_req->type.pio.request_current.sgl_index); + offset = stp_req->sgl.offset; + sgl_pair = to_sgl_element_pair(sci_req, stp_req->sgl.index); if (WARN_ONCE(!sgl_pair, "%s: null sgl element", __func__)) return SCI_FAILURE; - if (stp_req->type.pio.request_current.sgl_set == SCU_SGL_ELEMENT_PAIR_A) { - current_sgl = &sgl_pair->A; - remaining_bytes_in_current_sgl = sgl_pair->A.length - sgl_offset; + if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) { + sgl = &sgl_pair->A; + len = sgl_pair->A.length - offset; } else { - current_sgl = &sgl_pair->B; - remaining_bytes_in_current_sgl = sgl_pair->B.length - sgl_offset; + sgl = &sgl_pair->B; + len = sgl_pair->B.length - offset; } - if (stp_req->type.pio.pio_transfer_bytes > 0) { - if (stp_req->type.pio.pio_transfer_bytes >= remaining_bytes_in_current_sgl) { - /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = remaining_bytes_in_current_sgl */ - status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, remaining_bytes_in_current_sgl); - if (status == SCI_SUCCESS) { - stp_req->type.pio.pio_transfer_bytes -= remaining_bytes_in_current_sgl; - - /* update the current sgl, sgl_offset and save for future */ - current_sgl = pio_sgl_next(stp_req); - sgl_offset = 0; - } - } else if (stp_req->type.pio.pio_transfer_bytes < remaining_bytes_in_current_sgl) { - /* recycle the TC and send the H2D Data FIS from (current sgl + sgl_offset) and length = type.pio.pio_transfer_bytes */ - scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->type.pio.pio_transfer_bytes); + if (stp_req->pio_len == 0) + return SCI_SUCCESS; - if (status == SCI_SUCCESS) { - /* Sgl offset will be adjusted and saved for future */ - sgl_offset += stp_req->type.pio.pio_transfer_bytes; - current_sgl->address_lower += stp_req->type.pio.pio_transfer_bytes; - stp_req->type.pio.pio_transfer_bytes = 0; - } - } + if (stp_req->pio_len >= len) { + status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, len); + if (status != SCI_SUCCESS) + return status; + stp_req->pio_len -= len; + + /* update the current sgl, offset and save for future */ + sgl = pio_sgl_next(stp_req); + offset = 0; + } else if (stp_req->pio_len < len) { + scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->pio_len); + + /* Sgl offset will be adjusted and saved for future */ + offset += stp_req->pio_len; + sgl->address_lower += stp_req->pio_len; + stp_req->pio_len = 0; } - if (status == SCI_SUCCESS) { - stp_req->type.pio.request_current.sgl_offset = sgl_offset; - } + stp_req->sgl.offset = offset; return status; } @@ -1309,7 +1299,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct sc * specified data region. enum sci_status */ static enum sci_status -scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *stp_req, +scic_sds_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req, u8 *data_buf, u32 len) { struct scic_sds_request *sci_req; @@ -1356,7 +1346,7 @@ scic_sds_stp_request_pio_data_in_copy_data_buffer(struct scic_sds_stp_request *s * Copy the data buffer to the io request data region. enum sci_status */ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( - struct scic_sds_stp_request *sci_req, + struct isci_stp_request *stp_req, u8 *data_buffer) { enum sci_status status; @@ -1364,19 +1354,19 @@ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( /* * If there is less than 1K remaining in the transfer request * copy just the data for the transfer */ - if (sci_req->type.pio.pio_transfer_bytes < SCU_MAX_FRAME_BUFFER_SIZE) { + if (stp_req->pio_len < SCU_MAX_FRAME_BUFFER_SIZE) { status = scic_sds_stp_request_pio_data_in_copy_data_buffer( - sci_req, data_buffer, sci_req->type.pio.pio_transfer_bytes); + stp_req, data_buffer, stp_req->pio_len); if (status == SCI_SUCCESS) - sci_req->type.pio.pio_transfer_bytes = 0; + stp_req->pio_len = 0; } else { /* We are transfering the whole frame so copy */ status = scic_sds_stp_request_pio_data_in_copy_data_buffer( - sci_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); + stp_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); if (status == SCI_SUCCESS) - sci_req->type.pio.pio_transfer_bytes -= SCU_MAX_FRAME_BUFFER_SIZE; + stp_req->pio_len -= SCU_MAX_FRAME_BUFFER_SIZE; } return status; @@ -1419,18 +1409,18 @@ pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req, { enum sci_status status = SCI_SUCCESS; bool all_frames_transferred = false; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct isci_stp_request *stp_req = &sci_req->stp.req; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): /* Transmit data */ - if (stp_req->type.pio.pio_transfer_bytes != 0) { + if (stp_req->pio_len != 0) { status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); if (status == SCI_SUCCESS) { - if (stp_req->type.pio.pio_transfer_bytes == 0) + if (stp_req->pio_len == 0) all_frames_transferred = true; } - } else if (stp_req->type.pio.pio_transfer_bytes == 0) { + } else if (stp_req->pio_len == 0) { /* * this will happen if the all data is written at the * first time after the pio setup fis is received @@ -1507,7 +1497,7 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, u32 frame_index) { struct scic_sds_controller *scic = sci_req->owning_controller; - struct scic_sds_stp_request *stp_req = &sci_req->stp.req; + struct isci_stp_request *stp_req = &sci_req->stp.req; enum sci_base_request_states state; enum sci_status status; ssize_t word_cnt; @@ -1727,16 +1717,16 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, */ /* transfer_count: first 16bits in the 4th dword */ - stp_req->type.pio.pio_transfer_bytes = frame_buffer[3] & 0xffff; + stp_req->pio_len = frame_buffer[3] & 0xffff; - /* ending_status: 4th byte in the 3rd dword */ - stp_req->type.pio.ending_status = (frame_buffer[2] >> 24) & 0xff; + /* status: 4th byte in the 3rd dword */ + stp_req->status = (frame_buffer[2] >> 24) & 0xff; scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, frame_header, frame_buffer); - sci_req->stp.rsp.status = stp_req->type.pio.ending_status; + sci_req->stp.rsp.status = stp_req->status; /* The next state is dependent on whether the * request was PIO Data-in or Data out @@ -1839,9 +1829,9 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, return status; } - if (stp_req->type.pio.request_current.sgl_index < 0) { + if (stp_req->sgl.index < 0) { sci_req->saved_rx_frame_index = frame_index; - stp_req->type.pio.pio_transfer_bytes = 0; + stp_req->pio_len = 0; } else { scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, frame_index, @@ -1857,11 +1847,10 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, /* Check for the end of the transfer, are there more * bytes remaining for this data transfer */ - if (status != SCI_SUCCESS || - stp_req->type.pio.pio_transfer_bytes != 0) + if (status != SCI_SUCCESS || stp_req->pio_len != 0) return status; - if ((stp_req->type.pio.ending_status & ATA_BUSY) == 0) { + if ((stp_req->status & ATA_BUSY) == 0) { scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 7628dec..7fd9853 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -89,67 +89,25 @@ enum sci_request_protocol { SCIC_STP_PROTOCOL }; /* XXX remove me, use sas_task.{dev|task_proto} instead */; -struct scic_sds_stp_request { - union { - u32 ncq; - - u32 udma; - - struct scic_sds_stp_pio_request { - /* - * Total transfer for the entire PIO request recorded - * at request constuction time. - * - * @todo Should we just decrement this value for each - * byte of data transitted or received to elemenate - * the current_transfer_bytes field? - */ - u32 total_transfer_bytes; - - /* - * Total number of bytes received/transmitted in data - * frames since the start of the IO request. At the - * end of the IO request this should equal the - * total_transfer_bytes. - */ - u32 current_transfer_bytes; - - /* - * The number of bytes requested in the in the PIO - * setup. - */ - u32 pio_transfer_bytes; - - /* - * PIO Setup ending status value to tell us if we need - * to wait for another FIS or if the transfer is - * complete. On the receipt of a D2H FIS this will be - * the status field of that FIS. - */ - u8 ending_status; - - /* - * On receipt of a D2H FIS this will be the ending - * error field if the ending_status has the - * SATA_STATUS_ERR bit set. - */ - u8 ending_error; - - struct scic_sds_request_pio_sgl { - int sgl_index; - u8 sgl_set; - u32 sgl_offset; - } request_current; - } pio; - - struct { - /* - * The number of bytes requested in the PIO setup - * before CDB data frame. - */ - u32 device_preferred_cdb_length; - } packet; - } type; +/** + * isci_stp_request - extra request infrastructure to handle pio/atapi protocol + * @pio_len - number of bytes requested at PIO setup + * @status - pio setup ending status value to tell us if we need + * to wait for another fis or if the transfer is complete. Upon + * receipt of a d2h fis this will be the status field of that fis. + * @sgl - track pio transfer progress as we iterate through the sgl + * @device_cdb_len - atapi device advertises it's transfer constraints at setup + */ +struct isci_stp_request { + u32 pio_len; + u8 status; + + struct isci_stp_pio_sgl { + int index; + u8 set; + u32 offset; + } sgl; + u32 device_cdb_len; }; struct scic_sds_request { @@ -235,14 +193,14 @@ struct scic_sds_request { } smp; struct { - struct scic_sds_stp_request req; + struct isci_stp_request req; struct host_to_dev_fis cmd; struct dev_to_host_fis rsp; } stp; }; }; -static inline struct scic_sds_request *to_sci_req(struct scic_sds_stp_request *stp_req) +static inline struct scic_sds_request *to_sci_req(struct isci_stp_request *stp_req) { struct scic_sds_request *sci_req; -- cgit v0.10.2 From 5076a1a97e2fa61c847a5fdd4b1991faf7716da6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 27 Jun 2011 14:57:03 -0700 Subject: isci: unify isci_request and scic_sds_request They are one in the same object so remove the distinction. The near duplicate fields (owning_controller, and isci_host) will be cleaned up after the scic_sds_contoller isci_host unification. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 0884ae3..d91cd6d 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -258,21 +258,20 @@ static void scic_sds_controller_task_completion(struct scic_sds_controller *scic u32 index = SCU_GET_COMPLETION_INDEX(completion_entry); struct isci_host *ihost = scic_to_ihost(scic); struct isci_request *ireq = ihost->reqs[index]; - struct scic_sds_request *sci_req = &ireq->sci; /* Make sure that we really want to process this IO request */ if (test_bit(IREQ_ACTIVE, &ireq->flags) && - sci_req->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && - ISCI_TAG_SEQ(sci_req->io_tag) == scic->io_request_sequence[index]) + ireq->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && + ISCI_TAG_SEQ(ireq->io_tag) == scic->io_request_sequence[index]) /* Yep this is a valid io request pass it along to the io request handler */ - scic_sds_io_request_tc_completion(sci_req, completion_entry); + scic_sds_io_request_tc_completion(ireq, completion_entry); } static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic, u32 completion_entry) { u32 index; - struct scic_sds_request *io_request; + struct isci_request *ireq; struct scic_sds_remote_device *device; index = SCU_GET_COMPLETION_INDEX(completion_entry); @@ -280,41 +279,27 @@ static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic switch (scu_get_command_request_type(completion_entry)) { case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: - io_request = &scic_to_ihost(scic)->reqs[index]->sci; - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion type SDMA %x for io request " - "%p\n", - __func__, - completion_entry, - io_request); + ireq = scic_to_ihost(scic)->reqs[index]; + dev_warn(scic_to_dev(scic), "%s: %x for io request %p\n", + __func__, completion_entry, ireq); /* @todo For a post TC operation we need to fail the IO * request */ break; - case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: device = scic->device_table[index]; - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion type SDMA %x for remote " - "device %p\n", - __func__, - completion_entry, - device); + dev_warn(scic_to_dev(scic), "%s: %x for device %p\n", + __func__, completion_entry, device); /* @todo For a port RNC operation we need to fail the * device */ break; - default: - dev_warn(scic_to_dev(scic), - "%s: SCIC SDS Completion unknown SDMA completion " - "type %x\n", - __func__, - completion_entry); + dev_warn(scic_to_dev(scic), "%s: unknown completion type %x\n", + __func__, completion_entry); break; - } } @@ -385,8 +370,8 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci u32 completion_entry) { struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_request *io_request; struct scic_sds_remote_device *device; + struct isci_request *ireq; struct scic_sds_phy *phy; u32 index; @@ -418,17 +403,17 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci break; case SCU_EVENT_TYPE_TRANSPORT_ERROR: - io_request = &ihost->reqs[index]->sci; - scic_sds_io_request_event_handler(io_request, completion_entry); + ireq = ihost->reqs[index]; + scic_sds_io_request_event_handler(ireq, completion_entry); break; case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: switch (scu_get_event_specifier(completion_entry)) { case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: - io_request = &ihost->reqs[index]->sci; - if (io_request != NULL) - scic_sds_io_request_event_handler(io_request, completion_entry); + ireq = ihost->reqs[index]; + if (ireq != NULL) + scic_sds_io_request_event_handler(ireq, completion_entry); else dev_warn(scic_to_dev(scic), "%s: SCIC Controller 0x%p received " @@ -1185,7 +1170,7 @@ static void isci_host_completion_routine(unsigned long data) } spin_lock_irq(&isci_host->scic_lock); - isci_free_tag(isci_host, request->sci.io_tag); + isci_free_tag(isci_host, request->io_tag); spin_unlock_irq(&isci_host->scic_lock); } list_for_each_entry_safe(request, next_request, &errored_request_list, @@ -1222,7 +1207,7 @@ static void isci_host_completion_routine(unsigned long data) * of pending requests. */ list_del_init(&request->dev_node); - isci_free_tag(isci_host, request->sci.io_tag); + isci_free_tag(isci_host, request->io_tag); spin_unlock_irq(&isci_host->scic_lock); } } @@ -2486,8 +2471,8 @@ int isci_host_init(struct isci_host *isci_host) if (!ireq) return -ENOMEM; - ireq->sci.tc = &isci_host->sci.task_context_table[i]; - ireq->sci.owning_controller = &isci_host->sci; + ireq->tc = &isci_host->sci.task_context_table[i]; + ireq->owning_controller = &isci_host->sci; spin_lock_init(&ireq->state_lock); ireq->request_daddr = dma; ireq->isci_host = isci_host; @@ -2600,7 +2585,7 @@ void scic_sds_controller_post_request( writel(request, &scic->smu_registers->post_context_port); } -struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 io_tag) +struct isci_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 io_tag) { u16 task_index; u16 task_sequence; @@ -2614,7 +2599,7 @@ struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, u task_sequence = ISCI_TAG_SEQ(io_tag); if (task_sequence == scic->io_request_sequence[task_index]) - return &ireq->sci; + return ireq; } } @@ -2814,7 +2799,7 @@ enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) */ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, struct scic_sds_remote_device *rdev, - struct scic_sds_request *req) + struct isci_request *ireq) { enum sci_status status; @@ -2823,12 +2808,12 @@ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, return SCI_FAILURE_INVALID_STATE; } - status = scic_sds_remote_device_start_io(scic, rdev, req); + status = scic_sds_remote_device_start_io(scic, rdev, ireq); if (status != SCI_SUCCESS) return status; - set_bit(IREQ_ACTIVE, &sci_req_to_ireq(req)->flags); - scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(req)); + set_bit(IREQ_ACTIVE, &ireq->flags); + scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(ireq)); return SCI_SUCCESS; } @@ -2851,7 +2836,7 @@ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, enum sci_status scic_controller_terminate_request( struct scic_sds_controller *scic, struct scic_sds_remote_device *rdev, - struct scic_sds_request *req) + struct isci_request *ireq) { enum sci_status status; @@ -2861,7 +2846,7 @@ enum sci_status scic_controller_terminate_request( return SCI_FAILURE_INVALID_STATE; } - status = scic_sds_io_request_terminate(req); + status = scic_sds_io_request_terminate(ireq); if (status != SCI_SUCCESS) return status; @@ -2870,7 +2855,7 @@ enum sci_status scic_controller_terminate_request( * request sub-type. */ scic_sds_controller_post_request(scic, - scic_sds_request_get_post_context(req) | + scic_sds_request_get_post_context(ireq) | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); return SCI_SUCCESS; } @@ -2889,7 +2874,7 @@ enum sci_status scic_controller_terminate_request( enum sci_status scic_controller_complete_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *rdev, - struct scic_sds_request *request) + struct isci_request *ireq) { enum sci_status status; u16 index; @@ -2899,12 +2884,12 @@ enum sci_status scic_controller_complete_io( /* XXX: Implement this function */ return SCI_FAILURE; case SCIC_READY: - status = scic_sds_remote_device_complete_io(scic, rdev, request); + status = scic_sds_remote_device_complete_io(scic, rdev, ireq); if (status != SCI_SUCCESS) return status; - index = ISCI_TAG_TCI(request->io_tag); - clear_bit(IREQ_ACTIVE, &sci_req_to_ireq(request)->flags); + index = ISCI_TAG_TCI(ireq->io_tag); + clear_bit(IREQ_ACTIVE, &ireq->flags); return SCI_SUCCESS; default: dev_warn(scic_to_dev(scic), "invalid state to complete I/O"); @@ -2913,17 +2898,17 @@ enum sci_status scic_controller_complete_io( } -enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) +enum sci_status scic_controller_continue_io(struct isci_request *ireq) { - struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_controller *scic = ireq->owning_controller; if (scic->sm.current_state_id != SCIC_READY) { dev_warn(scic_to_dev(scic), "invalid state to continue I/O"); return SCI_FAILURE_INVALID_STATE; } - set_bit(IREQ_ACTIVE, &sci_req_to_ireq(sci_req)->flags); - scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(sci_req)); + set_bit(IREQ_ACTIVE, &ireq->flags); + scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(ireq)); return SCI_SUCCESS; } @@ -2939,9 +2924,8 @@ enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req) enum sci_task_status scic_controller_start_task( struct scic_sds_controller *scic, struct scic_sds_remote_device *rdev, - struct scic_sds_request *req) + struct isci_request *ireq) { - struct isci_request *ireq = sci_req_to_ireq(req); enum sci_status status; if (scic->sm.current_state_id != SCIC_READY) { @@ -2952,7 +2936,7 @@ enum sci_task_status scic_controller_start_task( return SCI_TASK_FAILURE_INVALID_STATE; } - status = scic_sds_remote_device_start_task(scic, rdev, req); + status = scic_sds_remote_device_start_task(scic, rdev, ireq); switch (status) { case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: set_bit(IREQ_ACTIVE, &ireq->flags); @@ -2967,7 +2951,7 @@ enum sci_task_status scic_controller_start_task( set_bit(IREQ_ACTIVE, &ireq->flags); scic_sds_controller_post_request(scic, - scic_sds_request_get_post_context(req)); + scic_sds_request_get_post_context(ireq)); break; default: break; diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 446fade..0b26d25 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -64,7 +64,7 @@ #include "unsolicited_frame_control.h" #include "probe_roms.h" -struct scic_sds_request; +struct isci_request; struct scu_task_context; @@ -601,7 +601,7 @@ union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffe struct scic_sds_controller *scic, u16 node_id); -struct scic_sds_request *scic_request_by_tag(struct scic_sds_controller *scic, +struct isci_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 io_tag); void scic_sds_controller_power_control_queue_insert( @@ -628,11 +628,11 @@ void scic_sds_controller_remote_device_stopped( void scic_sds_controller_copy_task_context( struct scic_sds_controller *scic, - struct scic_sds_request *this_request); + struct isci_request *ireq); void scic_sds_controller_register_setup(struct scic_sds_controller *scic); -enum sci_status scic_controller_continue_io(struct scic_sds_request *sci_req); +enum sci_status scic_controller_continue_io(struct isci_request *ireq); int isci_host_scan_finished(struct Scsi_Host *, unsigned long); void isci_host_scan_start(struct Scsi_Host *); u16 isci_alloc_tag(struct isci_host *ihost); @@ -665,22 +665,22 @@ void scic_controller_disable_interrupts( enum sci_status scic_controller_start_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request); + struct isci_request *ireq); enum sci_task_status scic_controller_start_task( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, - struct scic_sds_request *task_request); + struct isci_request *ireq); enum sci_status scic_controller_terminate_request( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, - struct scic_sds_request *request); + struct isci_request *ireq); enum sci_status scic_controller_complete_io( struct scic_sds_controller *scic, struct scic_sds_remote_device *remote_device, - struct scic_sds_request *io_request); + struct isci_request *ireq); void scic_sds_port_configuration_agent_construct( struct scic_sds_port_configuration_agent *port_agent); diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index c01d762..98d93ae 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -983,7 +983,7 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - + } static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm) diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 0e84e29..bd09154 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1611,7 +1611,7 @@ enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, enum sci_status scic_sds_port_start_io(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { enum scic_sds_port_states state; @@ -1631,7 +1631,7 @@ enum sci_status scic_sds_port_start_io(struct scic_sds_port *sci_port, enum sci_status scic_sds_port_complete_io(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { enum scic_sds_port_states state; diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index a44e541..668f3a1 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -354,17 +354,17 @@ enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, struct scic_sds_phy *sci_phy); -struct scic_sds_request; +struct isci_request; struct scic_sds_remote_device; enum sci_status scic_sds_port_start_io( struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req); + struct isci_request *ireq); enum sci_status scic_sds_port_complete_io( struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req); + struct isci_request *ireq); enum sas_linkrate scic_sds_port_get_max_allowed_speed( struct scic_sds_port *sci_port); diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 5a86bb1..c7cb0c5 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -94,7 +94,7 @@ static void isci_remote_device_not_ready(struct isci_host *ihost, scic_controller_terminate_request(&ihost->sci, &idev->sci, - &ireq->sci); + ireq); } /* Fall through into the default case... */ default: @@ -142,14 +142,13 @@ static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds for (i = 0; i < SCI_MAX_IO_REQUESTS && i < request_count; i++) { struct isci_request *ireq = ihost->reqs[i]; - struct scic_sds_request *sci_req = &ireq->sci; enum sci_status s; if (!test_bit(IREQ_ACTIVE, &ireq->flags) || - sci_req->target_device != sci_dev) + ireq->target_device != sci_dev) continue; - s = scic_controller_terminate_request(scic, sci_dev, sci_req); + s = scic_controller_terminate_request(scic, sci_dev, ireq); if (s != SCI_SUCCESS) status = s; } @@ -299,7 +298,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi case SCI_DEV_STOPPING: case SCI_DEV_FAILED: case SCI_DEV_RESETTING: { - struct scic_sds_request *sci_req; + struct isci_request *ireq; struct ssp_frame_hdr hdr; void *frame_header; ssize_t word_cnt; @@ -313,10 +312,10 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi word_cnt = sizeof(hdr) / sizeof(u32); sci_swab32_cpy(&hdr, frame_header, word_cnt); - sci_req = scic_request_by_tag(scic, be16_to_cpu(hdr.tag)); - if (sci_req && sci_req->target_device == sci_dev) { + ireq = scic_request_by_tag(scic, be16_to_cpu(hdr.tag)); + if (ireq && ireq->target_device == sci_dev) { /* The IO request is now in charge of releasing the frame */ - status = scic_sds_io_request_frame_handler(sci_req, frame_index); + status = scic_sds_io_request_frame_handler(ireq, frame_index); } else { /* We could not map this tag to a valid IO * request Just toss the frame and continue @@ -448,14 +447,14 @@ enum sci_status scic_sds_remote_device_event_handler(struct scic_sds_remote_devi } static void scic_sds_remote_device_start_request(struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req, + struct isci_request *ireq, enum sci_status status) { struct scic_sds_port *sci_port = sci_dev->owning_port; /* cleanup requests that failed after starting on the port */ if (status != SCI_SUCCESS) - scic_sds_port_complete_io(sci_port, sci_dev, sci_req); + scic_sds_port_complete_io(sci_port, sci_dev, ireq); else { kref_get(&sci_dev_to_idev(sci_dev)->kref); scic_sds_remote_device_increment_request_count(sci_dev); @@ -464,12 +463,11 @@ static void scic_sds_remote_device_start_request(struct scic_sds_remote_device * enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_port *sci_port = sci_dev->owning_port; - struct isci_request *ireq = sci_req_to_ireq(sci_req); enum sci_status status; switch (state) { @@ -491,15 +489,15 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic * successful it will start the request for the port object then * increment its own request count. */ - status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + status = scic_sds_port_start_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(sci_req); + status = scic_sds_request_start(ireq); break; case SCI_STP_DEV_IDLE: { /* handle the start io operation for a sata device that is in @@ -513,22 +511,22 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic enum scic_sds_remote_device_states new_state; struct sas_task *task = isci_request_access_task(ireq); - status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + status = scic_sds_port_start_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(sci_req); + status = scic_sds_request_start(ireq); if (status != SCI_SUCCESS) break; if (task->ata_task.use_ncq) new_state = SCI_STP_DEV_NCQ; else { - sci_dev->working_request = sci_req; + sci_dev->working_request = ireq; new_state = SCI_STP_DEV_CMD; } sci_change_state(sm, new_state); @@ -538,15 +536,15 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic struct sas_task *task = isci_request_access_task(ireq); if (task->ata_task.use_ncq) { - status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + status = scic_sds_port_start_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(sci_req); + status = scic_sds_request_start(ireq); } else return SCI_FAILURE_INVALID_STATE; break; @@ -554,19 +552,19 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic case SCI_STP_DEV_AWAIT_RESET: return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; case SCI_SMP_DEV_IDLE: - status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + status = scic_sds_port_start_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req); + status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(sci_req); + status = scic_sds_request_start(ireq); if (status != SCI_SUCCESS) break; - sci_dev->working_request = sci_req; + sci_dev->working_request = ireq; sci_change_state(&sci_dev->sm, SCI_SMP_DEV_CMD); break; case SCI_STP_DEV_CMD: @@ -577,21 +575,21 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic return SCI_FAILURE_INVALID_STATE; } - scic_sds_remote_device_start_request(sci_dev, sci_req, status); + scic_sds_remote_device_start_request(sci_dev, ireq, status); return status; } static enum sci_status common_complete_io(struct scic_sds_port *sci_port, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { enum sci_status status; - status = scic_sds_request_complete(sci_req); + status = scic_sds_request_complete(ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_port_complete_io(sci_port, sci_dev, sci_req); + status = scic_sds_port_complete_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) return status; @@ -601,7 +599,7 @@ static enum sci_status common_complete_io(struct scic_sds_port *sci_port, enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; @@ -623,16 +621,16 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s case SCI_DEV_READY: case SCI_STP_DEV_AWAIT_RESET: case SCI_DEV_RESETTING: - status = common_complete_io(sci_port, sci_dev, sci_req); + status = common_complete_io(sci_port, sci_dev, ireq); break; case SCI_STP_DEV_CMD: case SCI_STP_DEV_NCQ: case SCI_STP_DEV_NCQ_ERROR: - status = common_complete_io(sci_port, sci_dev, sci_req); + status = common_complete_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) break; - if (sci_req->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + if (ireq->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { /* This request causes hardware error, device needs to be Lun Reset. * So here we force the state machine to IDLE state so the rest IOs * can reach RNC state handler, these IOs will be completed by RNC with @@ -643,13 +641,13 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s sci_change_state(sm, SCI_STP_DEV_IDLE); break; case SCI_SMP_DEV_CMD: - status = common_complete_io(sci_port, sci_dev, sci_req); + status = common_complete_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) break; sci_change_state(sm, SCI_SMP_DEV_IDLE); break; case SCI_DEV_STOPPING: - status = common_complete_io(sci_port, sci_dev, sci_req); + status = common_complete_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) break; @@ -664,7 +662,7 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s dev_err(scirdev_to_dev(sci_dev), "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " "could not complete\n", __func__, sci_port, - sci_dev, sci_req, status); + sci_dev, ireq, status); else isci_put_device(sci_dev_to_idev(sci_dev)); @@ -682,7 +680,7 @@ static void scic_sds_remote_device_continue_request(void *dev) enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; @@ -708,15 +706,15 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc case SCI_STP_DEV_NCQ: case SCI_STP_DEV_NCQ_ERROR: case SCI_STP_DEV_AWAIT_RESET: - status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + status = scic_sds_port_start_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_task(&sci_dev->rnc, sci_req); + status = scic_sds_remote_node_context_start_task(&sci_dev->rnc, ireq); if (status != SCI_SUCCESS) goto out; - status = scic_sds_request_start(sci_req); + status = scic_sds_request_start(ireq); if (status != SCI_SUCCESS) goto out; @@ -724,7 +722,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc * replace the request that probably resulted in the task * management request. */ - sci_dev->working_request = sci_req; + sci_dev->working_request = ireq; sci_change_state(sm, SCI_STP_DEV_CMD); /* The remote node context must cleanup the TCi to NCQ mapping @@ -741,25 +739,25 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc sci_dev); out: - scic_sds_remote_device_start_request(sci_dev, sci_req, status); + scic_sds_remote_device_start_request(sci_dev, ireq, status); /* We need to let the controller start request handler know that * it can't post TC yet. We will provide a callback function to * post TC when RNC gets resumed. */ return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; case SCI_DEV_READY: - status = scic_sds_port_start_io(sci_port, sci_dev, sci_req); + status = scic_sds_port_start_io(sci_port, sci_dev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_task(&sci_dev->rnc, sci_req); + status = scic_sds_remote_node_context_start_task(&sci_dev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(sci_req); + status = scic_sds_request_start(ireq); break; } - scic_sds_remote_device_start_request(sci_dev, sci_req, status); + scic_sds_remote_device_start_request(sci_dev, ireq, status); return status; } diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 0d9e37f..6ac5dfb 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -120,7 +120,7 @@ struct scic_sds_remote_device { * used only for SATA requests since the unsolicited frames we get from the * hardware have no Tag value to look up the io request object. */ - struct scic_sds_request *working_request; + struct isci_request *working_request; /** * This field contains the reason for the remote device going not_ready. It is @@ -466,17 +466,17 @@ enum sci_status scic_sds_remote_device_event_handler( enum sci_status scic_sds_remote_device_start_io( struct scic_sds_controller *controller, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); + struct isci_request *ireq); enum sci_status scic_sds_remote_device_start_task( struct scic_sds_controller *controller, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); + struct isci_request *ireq); enum sci_status scic_sds_remote_device_complete_io( struct scic_sds_controller *controller, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); + struct isci_request *ireq); enum sci_status scic_sds_remote_device_suspend( struct scic_sds_remote_device *sci_dev, diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index b6774bc..1b51fe5 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -598,7 +598,7 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ } enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { enum scis_sds_remote_node_context_states state; @@ -623,7 +623,7 @@ enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_nod } enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { enum scis_sds_remote_node_context_states state; diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index 67a45b6..35e6ae6 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -78,7 +78,7 @@ #define SCU_HARDWARE_SUSPENSION (0) #define SCI_SOFTWARE_SUSPENSION (1) -struct scic_sds_request; +struct isci_request; struct scic_sds_remote_device; struct scic_sds_remote_node_context; @@ -220,8 +220,8 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ scics_sds_remote_node_context_callback cb_fn, void *cb_p); enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req); + struct isci_request *ireq); enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_node_context *sci_rnc, - struct scic_sds_request *sci_req); + struct isci_request *ireq); #endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 8520626..c544bc7 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -61,35 +61,35 @@ #include "scu_event_codes.h" #include "sas.h" -static struct scu_sgl_element_pair *to_sgl_element_pair(struct scic_sds_request *sci_req, +static struct scu_sgl_element_pair *to_sgl_element_pair(struct isci_request *ireq, int idx) { if (idx == 0) - return &sci_req->tc->sgl_pair_ab; + return &ireq->tc->sgl_pair_ab; else if (idx == 1) - return &sci_req->tc->sgl_pair_cd; + return &ireq->tc->sgl_pair_cd; else if (idx < 0) return NULL; else - return &sci_req->sg_table[idx - 2]; + return &ireq->sg_table[idx - 2]; } static dma_addr_t to_sgl_element_pair_dma(struct scic_sds_controller *scic, - struct scic_sds_request *sci_req, u32 idx) + struct isci_request *ireq, u32 idx) { u32 offset; if (idx == 0) { - offset = (void *) &sci_req->tc->sgl_pair_ab - + offset = (void *) &ireq->tc->sgl_pair_ab - (void *) &scic->task_context_table[0]; return scic->task_context_dma + offset; } else if (idx == 1) { - offset = (void *) &sci_req->tc->sgl_pair_cd - + offset = (void *) &ireq->tc->sgl_pair_cd - (void *) &scic->task_context_table[0]; return scic->task_context_dma + offset; } - return scic_io_request_get_dma_addr(sci_req, &sci_req->sg_table[idx - 2]); + return scic_io_request_get_dma_addr(ireq, &ireq->sg_table[idx - 2]); } static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) @@ -100,12 +100,11 @@ static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) e->address_modifier = 0; } -static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) +static void scic_sds_request_build_sgl(struct isci_request *ireq) { - struct isci_request *isci_request = sci_req_to_ireq(sds_request); - struct isci_host *isci_host = isci_request->isci_host; + struct isci_host *isci_host = ireq->isci_host; struct scic_sds_controller *scic = &isci_host->sci; - struct sas_task *task = isci_request_access_task(isci_request); + struct sas_task *task = isci_request_access_task(ireq); struct scatterlist *sg = NULL; dma_addr_t dma_addr; u32 sg_idx = 0; @@ -116,7 +115,7 @@ static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) sg = task->scatter; while (sg) { - scu_sg = to_sgl_element_pair(sds_request, sg_idx); + scu_sg = to_sgl_element_pair(ireq, sg_idx); init_sgl_element(&scu_sg->A, sg); sg = sg_next(sg); if (sg) { @@ -127,7 +126,7 @@ static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) if (prev_sg) { dma_addr = to_sgl_element_pair_dma(scic, - sds_request, + ireq, sg_idx); prev_sg->next_pair_upper = @@ -140,14 +139,14 @@ static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) sg_idx++; } } else { /* handle when no sg */ - scu_sg = to_sgl_element_pair(sds_request, sg_idx); + scu_sg = to_sgl_element_pair(ireq, sg_idx); dma_addr = dma_map_single(&isci_host->pdev->dev, task->scatter, task->total_xfer_len, task->data_dir); - isci_request->zero_scatter_daddr = dma_addr; + ireq->zero_scatter_daddr = dma_addr; scu_sg->A.length = task->total_xfer_len; scu_sg->A.address_upper = upper_32_bits(dma_addr); @@ -160,13 +159,12 @@ static void scic_sds_request_build_sgl(struct scic_sds_request *sds_request) } } -static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sci_req) +static void scic_sds_io_request_build_ssp_command_iu(struct isci_request *ireq) { struct ssp_cmd_iu *cmd_iu; - struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); - cmd_iu = &sci_req->ssp.cmd; + cmd_iu = &ireq->ssp.cmd; memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8); cmd_iu->add_cdb_len = 0; @@ -181,14 +179,13 @@ static void scic_sds_io_request_build_ssp_command_iu(struct scic_sds_request *sc sizeof(task->ssp_task.cdb) / sizeof(u32)); } -static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci_req) +static void scic_sds_task_request_build_ssp_task_iu(struct isci_request *ireq) { struct ssp_task_iu *task_iu; - struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - task_iu = &sci_req->ssp.tmf; + task_iu = &ireq->ssp.tmf; memset(task_iu, 0, sizeof(struct ssp_task_iu)); @@ -208,15 +205,15 @@ static void scic_sds_task_request_build_ssp_task_iu(struct scic_sds_request *sci * */ static void scu_ssp_reqeust_construct_task_context( - struct scic_sds_request *sds_request, + struct isci_request *ireq, struct scu_task_context *task_context) { dma_addr_t dma_addr; struct scic_sds_remote_device *target_device; struct scic_sds_port *target_port; - target_device = scic_sds_request_get_device(sds_request); - target_port = scic_sds_request_get_port(sds_request); + target_device = scic_sds_request_get_device(ireq); + target_port = scic_sds_request_get_port(ireq); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -232,7 +229,7 @@ static void scu_ssp_reqeust_construct_task_context( task_context->context_type = SCU_TASK_CONTEXT_TYPE; task_context->remote_node_index = - scic_sds_remote_device_get_index(sds_request->target_device); + scic_sds_remote_device_get_index(ireq->target_device); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -244,22 +241,21 @@ static void scu_ssp_reqeust_construct_task_context( task_context->address_modifier = 0; - /* task_context->type.ssp.tag = sci_req->io_tag; */ + /* task_context->type.ssp.tag = ireq->io_tag; */ task_context->task_phase = 0x01; - sds_request->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | (scic_sds_controller_get_protocol_engine_group(controller) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | (scic_sds_port_get_index(target_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(sds_request->io_tag)); + ISCI_TAG_TCI(ireq->io_tag)); /* * Copy the physical address for the command buffer to the * SCU Task Context */ - dma_addr = scic_io_request_get_dma_addr(sds_request, - &sds_request->ssp.cmd); + dma_addr = scic_io_request_get_dma_addr(ireq, &ireq->ssp.cmd); task_context->command_iu_upper = upper_32_bits(dma_addr); task_context->command_iu_lower = lower_32_bits(dma_addr); @@ -268,8 +264,7 @@ static void scu_ssp_reqeust_construct_task_context( * Copy the physical address for the response buffer to the * SCU Task Context */ - dma_addr = scic_io_request_get_dma_addr(sds_request, - &sds_request->ssp.rsp); + dma_addr = scic_io_request_get_dma_addr(ireq, &ireq->ssp.rsp); task_context->response_iu_upper = upper_32_bits(dma_addr); task_context->response_iu_lower = lower_32_bits(dma_addr); @@ -280,13 +275,13 @@ static void scu_ssp_reqeust_construct_task_context( * @sci_req: * */ -static void scu_ssp_io_request_construct_task_context(struct scic_sds_request *sci_req, +static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq, enum dma_data_direction dir, u32 len) { - struct scu_task_context *task_context = sci_req->tc; + struct scu_task_context *task_context = ireq->tc; - scu_ssp_reqeust_construct_task_context(sci_req, task_context); + scu_ssp_reqeust_construct_task_context(ireq, task_context); task_context->ssp_command_iu_length = sizeof(struct ssp_cmd_iu) / sizeof(u32); @@ -306,7 +301,7 @@ static void scu_ssp_io_request_construct_task_context(struct scic_sds_request *s task_context->transfer_length_bytes = len; if (task_context->transfer_length_bytes > 0) - scic_sds_request_build_sgl(sci_req); + scic_sds_request_build_sgl(ireq); } /** @@ -322,11 +317,11 @@ static void scu_ssp_io_request_construct_task_context(struct scic_sds_request *s * constructed. * */ -static void scu_ssp_task_request_construct_task_context(struct scic_sds_request *sci_req) +static void scu_ssp_task_request_construct_task_context(struct isci_request *ireq) { - struct scu_task_context *task_context = sci_req->tc; + struct scu_task_context *task_context = ireq->tc; - scu_ssp_reqeust_construct_task_context(sci_req, task_context); + scu_ssp_reqeust_construct_task_context(ireq, task_context); task_context->control_frame = 1; task_context->priority = SCU_TASK_PRIORITY_HIGH; @@ -350,15 +345,15 @@ static void scu_ssp_task_request_construct_task_context(struct scic_sds_request * determine what is common for SSP/SMP/STP task context structures. */ static void scu_sata_reqeust_construct_task_context( - struct scic_sds_request *sci_req, + struct isci_request *ireq, struct scu_task_context *task_context) { dma_addr_t dma_addr; struct scic_sds_remote_device *target_device; struct scic_sds_port *target_port; - target_device = scic_sds_request_get_device(sci_req); - target_port = scic_sds_request_get_port(sci_req); + target_device = scic_sds_request_get_device(ireq); + target_port = scic_sds_request_get_port(ireq); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -374,7 +369,7 @@ static void scu_sata_reqeust_construct_task_context( task_context->context_type = SCU_TASK_CONTEXT_TYPE; task_context->remote_node_index = - scic_sds_remote_device_get_index(sci_req->target_device); + scic_sds_remote_device_get_index(ireq->target_device); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -391,21 +386,21 @@ static void scu_sata_reqeust_construct_task_context( (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); /* Set the first word of the H2D REG FIS */ - task_context->type.words[0] = *(u32 *)&sci_req->stp.cmd; + task_context->type.words[0] = *(u32 *)&ireq->stp.cmd; - sci_req->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | (scic_sds_controller_get_protocol_engine_group(controller) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | (scic_sds_port_get_index(target_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(sci_req->io_tag)); + ISCI_TAG_TCI(ireq->io_tag)); /* * Copy the physical address for the command buffer to the SCU Task * Context. We must offset the command buffer by 4 bytes because the * first 4 bytes are transfered in the body of the TC. */ - dma_addr = scic_io_request_get_dma_addr(sci_req, - ((char *) &sci_req->stp.cmd) + + dma_addr = scic_io_request_get_dma_addr(ireq, + ((char *) &ireq->stp.cmd) + sizeof(u32)); task_context->command_iu_upper = upper_32_bits(dma_addr); @@ -416,11 +411,11 @@ static void scu_sata_reqeust_construct_task_context( task_context->response_iu_lower = 0; } -static void scu_stp_raw_request_construct_task_context(struct scic_sds_request *sci_req) +static void scu_stp_raw_request_construct_task_context(struct isci_request *ireq) { - struct scu_task_context *task_context = sci_req->tc; + struct scu_task_context *task_context = ireq->tc; - scu_sata_reqeust_construct_task_context(sci_req, task_context); + scu_sata_reqeust_construct_task_context(ireq, task_context); task_context->control_frame = 0; task_context->priority = SCU_TASK_PRIORITY_NORMAL; @@ -429,20 +424,19 @@ static void scu_stp_raw_request_construct_task_context(struct scic_sds_request * task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); } -static enum sci_status -scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, - bool copy_rx_frame) +static enum sci_status scic_sds_stp_pio_request_construct(struct isci_request *ireq, + bool copy_rx_frame) { - struct isci_stp_request *stp_req = &sci_req->stp.req; + struct isci_stp_request *stp_req = &ireq->stp.req; - scu_stp_raw_request_construct_task_context(sci_req); + scu_stp_raw_request_construct_task_context(ireq); stp_req->status = 0; stp_req->sgl.offset = 0; stp_req->sgl.set = SCU_SGL_ELEMENT_PAIR_A; if (copy_rx_frame) { - scic_sds_request_build_sgl(sci_req); + scic_sds_request_build_sgl(ireq); stp_req->sgl.index = 0; } else { /* The user does not want the data copied to the SGL buffer location */ @@ -464,18 +458,18 @@ scic_sds_stp_pio_request_construct(struct scic_sds_request *sci_req, * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method * returns an indication as to whether the construction was successful. */ -static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sci_req, +static void scic_sds_stp_optimized_request_construct(struct isci_request *ireq, u8 optimized_task_type, u32 len, enum dma_data_direction dir) { - struct scu_task_context *task_context = sci_req->tc; + struct scu_task_context *task_context = ireq->tc; /* Build the STP task context structure */ - scu_sata_reqeust_construct_task_context(sci_req, task_context); + scu_sata_reqeust_construct_task_context(ireq, task_context); /* Copy over the SGL elements */ - scic_sds_request_build_sgl(sci_req); + scic_sds_request_build_sgl(ireq); /* Copy over the number of bytes to be transfered */ task_context->transfer_length_bytes = len; @@ -500,13 +494,12 @@ static void scic_sds_stp_optimized_request_construct(struct scic_sds_request *sc static enum sci_status -scic_io_request_construct_sata(struct scic_sds_request *sci_req, +scic_io_request_construct_sata(struct isci_request *ireq, u32 len, enum dma_data_direction dir, bool copy) { enum sci_status status = SCI_SUCCESS; - struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); /* check for management protocols */ @@ -515,20 +508,20 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, if (tmf->tmf_code == isci_tmf_sata_srst_high || tmf->tmf_code == isci_tmf_sata_srst_low) { - scu_stp_raw_request_construct_task_context(sci_req); + scu_stp_raw_request_construct_task_context(ireq); return SCI_SUCCESS; } else { - dev_err(scic_to_dev(sci_req->owning_controller), + dev_err(scic_to_dev(ireq->owning_controller), "%s: Request 0x%p received un-handled SAT " "management protocol 0x%x.\n", - __func__, sci_req, tmf->tmf_code); + __func__, ireq, tmf->tmf_code); return SCI_FAILURE; } } if (!sas_protocol_ata(task->task_proto)) { - dev_err(scic_to_dev(sci_req->owning_controller), + dev_err(scic_to_dev(ireq->owning_controller), "%s: Non-ATA protocol in SATA path: 0x%x\n", __func__, task->task_proto); @@ -538,13 +531,13 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, /* non data */ if (task->data_dir == DMA_NONE) { - scu_stp_raw_request_construct_task_context(sci_req); + scu_stp_raw_request_construct_task_context(ireq); return SCI_SUCCESS; } /* NCQ */ if (task->ata_task.use_ncq) { - scic_sds_stp_optimized_request_construct(sci_req, + scic_sds_stp_optimized_request_construct(ireq, SCU_TASK_TYPE_FPDMAQ_READ, len, dir); return SCI_SUCCESS; @@ -552,74 +545,71 @@ scic_io_request_construct_sata(struct scic_sds_request *sci_req, /* DMA */ if (task->ata_task.dma_xfer) { - scic_sds_stp_optimized_request_construct(sci_req, + scic_sds_stp_optimized_request_construct(ireq, SCU_TASK_TYPE_DMA_IN, len, dir); return SCI_SUCCESS; } else /* PIO */ - return scic_sds_stp_pio_request_construct(sci_req, copy); + return scic_sds_stp_pio_request_construct(ireq, copy); return status; } -static enum sci_status scic_io_request_construct_basic_ssp(struct scic_sds_request *sci_req) +static enum sci_status scic_io_request_construct_basic_ssp(struct isci_request *ireq) { - struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); - sci_req->protocol = SCIC_SSP_PROTOCOL; + ireq->protocol = SCIC_SSP_PROTOCOL; - scu_ssp_io_request_construct_task_context(sci_req, + scu_ssp_io_request_construct_task_context(ireq, task->data_dir, task->total_xfer_len); - scic_sds_io_request_build_ssp_command_iu(sci_req); + scic_sds_io_request_build_ssp_command_iu(ireq); - sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); return SCI_SUCCESS; } enum sci_status scic_task_request_construct_ssp( - struct scic_sds_request *sci_req) + struct isci_request *ireq) { /* Construct the SSP Task SCU Task Context */ - scu_ssp_task_request_construct_task_context(sci_req); + scu_ssp_task_request_construct_task_context(ireq); /* Fill in the SSP Task IU */ - scic_sds_task_request_build_ssp_task_iu(sci_req); + scic_sds_task_request_build_ssp_task_iu(ireq); - sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); return SCI_SUCCESS; } -static enum sci_status scic_io_request_construct_basic_sata(struct scic_sds_request *sci_req) +static enum sci_status scic_io_request_construct_basic_sata(struct isci_request *ireq) { enum sci_status status; bool copy = false; - struct isci_request *isci_request = sci_req_to_ireq(sci_req); - struct sas_task *task = isci_request_access_task(isci_request); + struct sas_task *task = isci_request_access_task(ireq); - sci_req->protocol = SCIC_STP_PROTOCOL; + ireq->protocol = SCIC_STP_PROTOCOL; copy = (task->data_dir == DMA_NONE) ? false : true; - status = scic_io_request_construct_sata(sci_req, + status = scic_io_request_construct_sata(ireq, task->total_xfer_len, task->data_dir, copy); if (status == SCI_SUCCESS) - sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); return status; } -enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_req) +enum sci_status scic_task_request_construct_sata(struct isci_request *ireq) { enum sci_status status = SCI_SUCCESS; - struct isci_request *ireq = sci_req_to_ireq(sci_req); /* check for management protocols */ if (ireq->ttype == tmf_task) { @@ -627,12 +617,12 @@ enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_re if (tmf->tmf_code == isci_tmf_sata_srst_high || tmf->tmf_code == isci_tmf_sata_srst_low) { - scu_stp_raw_request_construct_task_context(sci_req); + scu_stp_raw_request_construct_task_context(ireq); } else { - dev_err(scic_to_dev(sci_req->owning_controller), + dev_err(scic_to_dev(ireq->owning_controller), "%s: Request 0x%p received un-handled SAT " "Protocol 0x%x.\n", - __func__, sci_req, tmf->tmf_code); + __func__, ireq, tmf->tmf_code); return SCI_FAILURE; } @@ -640,7 +630,7 @@ enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_re if (status != SCI_SUCCESS) return status; - sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); return status; } @@ -650,9 +640,9 @@ enum sci_status scic_task_request_construct_sata(struct scic_sds_request *sci_re * @sci_req: request that was terminated early */ #define SCU_TASK_CONTEXT_SRAM 0x200000 -static u32 sci_req_tx_bytes(struct scic_sds_request *sci_req) +static u32 sci_req_tx_bytes(struct isci_request *ireq) { - struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_controller *scic = ireq->owning_controller; u32 ret_val = 0; if (readl(&scic->smu_registers->address_modifier) == 0) { @@ -666,19 +656,19 @@ static u32 sci_req_tx_bytes(struct scic_sds_request *sci_req) */ ret_val = readl(scu_reg_base + (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + - ((sizeof(struct scu_task_context)) * ISCI_TAG_TCI(sci_req->io_tag))); + ((sizeof(struct scu_task_context)) * ISCI_TAG_TCI(ireq->io_tag))); } return ret_val; } -enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) +enum sci_status scic_sds_request_start(struct isci_request *ireq) { enum sci_base_request_states state; - struct scu_task_context *tc = sci_req->tc; - struct scic_sds_controller *scic = sci_req->owning_controller; + struct scu_task_context *tc = ireq->tc; + struct scic_sds_controller *scic = ireq->owning_controller; - state = sci_req->sm.current_state_id; + state = ireq->sm.current_state_id; if (state != SCI_REQ_CONSTRUCTED) { dev_warn(scic_to_dev(scic), "%s: SCIC IO Request requested to start while in wrong " @@ -686,19 +676,19 @@ enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) return SCI_FAILURE_INVALID_STATE; } - tc->task_index = ISCI_TAG_TCI(sci_req->io_tag); + tc->task_index = ISCI_TAG_TCI(ireq->io_tag); switch (tc->protocol_type) { case SCU_TASK_CONTEXT_PROTOCOL_SMP: case SCU_TASK_CONTEXT_PROTOCOL_SSP: /* SSP/SMP Frame */ - tc->type.ssp.tag = sci_req->io_tag; + tc->type.ssp.tag = ireq->io_tag; tc->type.ssp.target_port_transfer_tag = 0xFFFF; break; case SCU_TASK_CONTEXT_PROTOCOL_STP: /* STP/SATA Frame - * tc->type.stp.ncq_tag = sci_req->ncq_tag; + * tc->type.stp.ncq_tag = ireq->ncq_tag; */ break; @@ -713,28 +703,28 @@ enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req) } /* Add to the post_context the io tag value */ - sci_req->post_context |= ISCI_TAG_TCI(sci_req->io_tag); + ireq->post_context |= ISCI_TAG_TCI(ireq->io_tag); /* Everything is good go ahead and change state */ - sci_change_state(&sci_req->sm, SCI_REQ_STARTED); + sci_change_state(&ireq->sm, SCI_REQ_STARTED); return SCI_SUCCESS; } enum sci_status -scic_sds_io_request_terminate(struct scic_sds_request *sci_req) +scic_sds_io_request_terminate(struct isci_request *ireq) { enum sci_base_request_states state; - state = sci_req->sm.current_state_id; + state = ireq->sm.current_state_id; switch (state) { case SCI_REQ_CONSTRUCTED: - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; case SCI_REQ_STARTED: case SCI_REQ_TASK_WAIT_TC_COMP: @@ -751,54 +741,54 @@ scic_sds_io_request_terminate(struct scic_sds_request *sci_req) case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: - sci_change_state(&sci_req->sm, SCI_REQ_ABORTING); + sci_change_state(&ireq->sm, SCI_REQ_ABORTING); return SCI_SUCCESS; case SCI_REQ_TASK_WAIT_TC_RESP: - sci_change_state(&sci_req->sm, SCI_REQ_ABORTING); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_ABORTING); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; case SCI_REQ_ABORTING: - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; case SCI_REQ_COMPLETED: default: - dev_warn(scic_to_dev(sci_req->owning_controller), + dev_warn(scic_to_dev(ireq->owning_controller), "%s: SCIC IO Request requested to abort while in wrong " "state %d\n", __func__, - sci_req->sm.current_state_id); + ireq->sm.current_state_id); break; } return SCI_FAILURE_INVALID_STATE; } -enum sci_status scic_sds_request_complete(struct scic_sds_request *sci_req) +enum sci_status scic_sds_request_complete(struct isci_request *ireq) { enum sci_base_request_states state; - struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_controller *scic = ireq->owning_controller; - state = sci_req->sm.current_state_id; + state = ireq->sm.current_state_id; if (WARN_ONCE(state != SCI_REQ_COMPLETED, "isci: request completion from wrong state (%d)\n", state)) return SCI_FAILURE_INVALID_STATE; - if (sci_req->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) + if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) scic_sds_controller_release_frame(scic, - sci_req->saved_rx_frame_index); + ireq->saved_rx_frame_index); /* XXX can we just stop the machine and remove the 'final' state? */ - sci_change_state(&sci_req->sm, SCI_REQ_FINAL); + sci_change_state(&ireq->sm, SCI_REQ_FINAL); return SCI_SUCCESS; } -enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, +enum sci_status scic_sds_io_request_event_handler(struct isci_request *ireq, u32 event_code) { enum sci_base_request_states state; - struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_controller *scic = ireq->owning_controller; - state = sci_req->sm.current_state_id; + state = ireq->sm.current_state_id; if (state != SCI_REQ_STP_PIO_DATA_IN) { dev_warn(scic_to_dev(scic), "%s: (%x) in wrong state %d\n", @@ -812,7 +802,7 @@ enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_r /* We are waiting for data and the SCU has R_ERR the data frame. * Go back to waiting for the D2H Register FIS */ - sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); return SCI_SUCCESS; default: dev_err(scic_to_dev(scic), @@ -832,15 +822,14 @@ enum sci_status scic_sds_io_request_event_handler(struct scic_sds_request *sci_r * @sci_req: This parameter specifies the request object for which to copy * the response data. */ -static void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) +static void scic_sds_io_request_copy_response(struct isci_request *ireq) { void *resp_buf; u32 len; struct ssp_response_iu *ssp_response; - struct isci_request *ireq = sci_req_to_ireq(sci_req); struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); - ssp_response = &sci_req->ssp.rsp; + ssp_response = &ireq->ssp.rsp; resp_buf = &isci_tmf->resp.resp_iu; @@ -852,7 +841,7 @@ static void scic_sds_io_request_copy_response(struct scic_sds_request *sci_req) } static enum sci_status -request_started_state_tc_event(struct scic_sds_request *sci_req, +request_started_state_tc_event(struct isci_request *ireq, u32 completion_code) { struct ssp_response_iu *resp_iu; @@ -863,7 +852,7 @@ request_started_state_tc_event(struct scic_sds_request *sci_req, */ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; @@ -875,19 +864,19 @@ request_started_state_tc_event(struct scic_sds_request *sci_req, * truly a failed request or a good request that just got * completed early. */ - struct ssp_response_iu *resp = &sci_req->ssp.rsp; + struct ssp_response_iu *resp = &ireq->ssp.rsp; ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - sci_swab32_cpy(&sci_req->ssp.rsp, - &sci_req->ssp.rsp, + sci_swab32_cpy(&ireq->ssp.rsp, + &ireq->ssp.rsp, word_cnt); if (resp->status == 0) { - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY); } else { - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); } @@ -896,11 +885,11 @@ request_started_state_tc_event(struct scic_sds_request *sci_req, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): { ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - sci_swab32_cpy(&sci_req->ssp.rsp, - &sci_req->ssp.rsp, + sci_swab32_cpy(&ireq->ssp.rsp, + &ireq->ssp.rsp, word_cnt); - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); break; @@ -911,15 +900,15 @@ request_started_state_tc_event(struct scic_sds_request *sci_req, * guaranteed to be received before this completion status is * posted? */ - resp_iu = &sci_req->ssp.rsp; + resp_iu = &ireq->ssp.rsp; datapres = resp_iu->datapres; if (datapres == 1 || datapres == 2) { - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); } else - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; @@ -935,13 +924,13 @@ request_started_state_tc_event(struct scic_sds_request *sci_req, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): - if (sci_req->protocol == SCIC_STP_PROTOCOL) { - scic_sds_request_set_status(sci_req, + if (ireq->protocol == SCIC_STP_PROTOCOL) { + scic_sds_request_set_status(ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); } else { - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -959,7 +948,7 @@ request_started_state_tc_event(struct scic_sds_request *sci_req, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); @@ -983,7 +972,7 @@ request_started_state_tc_event(struct scic_sds_request *sci_req, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): default: scic_sds_request_set_status( - sci_req, + ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -995,21 +984,21 @@ request_started_state_tc_event(struct scic_sds_request *sci_req, */ /* In all cases we will treat this as the completion of the IO req. */ - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; } static enum sci_status -request_aborting_state_tc_event(struct scic_sds_request *sci_req, +request_aborting_state_tc_event(struct isci_request *ireq, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_TASK_ABORT, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; default: @@ -1022,15 +1011,15 @@ request_aborting_state_tc_event(struct scic_sds_request *sci_req, return SCI_SUCCESS; } -static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request *sci_req, +static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_change_state(&sci_req->sm, SCI_REQ_TASK_WAIT_TC_RESP); + sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): /* Currently, the decision is to simply allow the task request @@ -1038,12 +1027,12 @@ static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request * * There is a potential for receiving multiple task responses if * we decide to send the task IU again. */ - dev_warn(scic_to_dev(sci_req->owning_controller), + dev_warn(scic_to_dev(ireq->owning_controller), "%s: TaskRequest:0x%p CompletionCode:%x - " - "ACK/NAK timeout\n", __func__, sci_req, + "ACK/NAK timeout\n", __func__, ireq, completion_code); - sci_change_state(&sci_req->sm, SCI_REQ_TASK_WAIT_TC_RESP); + sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); break; default: /* @@ -1051,11 +1040,11 @@ static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request * * If a NAK was received, then it is up to the user to retry * the request. */ - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1063,7 +1052,7 @@ static enum sci_status ssp_task_request_await_tc_event(struct scic_sds_request * } static enum sci_status -smp_request_await_response_tc_event(struct scic_sds_request *sci_req, +smp_request_await_response_tc_event(struct isci_request *ireq, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { @@ -1072,10 +1061,10 @@ smp_request_await_response_tc_event(struct scic_sds_request *sci_req, * unexpected. but if the TC has success status, we * complete the IO anyway. */ - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): @@ -1089,21 +1078,21 @@ smp_request_await_response_tc_event(struct scic_sds_request *sci_req, * these SMP_XXX_XX_ERR status. For these type of error, * we ask scic user to retry the request. */ - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_SMP_RESP_TO_ERR, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; default: /* All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request */ - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1111,50 +1100,50 @@ smp_request_await_response_tc_event(struct scic_sds_request *sci_req, } static enum sci_status -smp_request_await_tc_event(struct scic_sds_request *sci_req, +smp_request_await_tc_event(struct isci_request *ireq, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; default: /* All other completion status cause the IO to be * complete. If a NAK was received, then it is up to * the user to retry the request. */ - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } return SCI_SUCCESS; } -void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *req, +void scic_stp_io_request_set_ncq_tag(struct isci_request *ireq, u16 ncq_tag) { /** * @note This could be made to return an error to the user if the user * attempts to set the NCQ tag in the wrong state. */ - req->tc->type.stp.ncq_tag = ncq_tag; + ireq->tc->type.stp.ncq_tag = ncq_tag; } static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req) { struct scu_sgl_element *sgl; struct scu_sgl_element_pair *sgl_pair; - struct scic_sds_request *sci_req = to_sci_req(stp_req); + struct isci_request *ireq = to_ireq(stp_req); struct isci_stp_pio_sgl *pio_sgl = &stp_req->sgl; - sgl_pair = to_sgl_element_pair(sci_req, pio_sgl->index); + sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index); if (!sgl_pair) sgl = NULL; else if (pio_sgl->set == SCU_SGL_ELEMENT_PAIR_A) { @@ -1172,7 +1161,7 @@ static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req) } else { pio_sgl->index++; pio_sgl->set = SCU_SGL_ELEMENT_PAIR_A; - sgl_pair = to_sgl_element_pair(sci_req, pio_sgl->index); + sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index); sgl = &sgl_pair->A; } } @@ -1181,15 +1170,15 @@ static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req) } static enum sci_status -stp_request_non_data_await_h2d_tc_event(struct scic_sds_request *sci_req, +stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_change_state(&sci_req->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H); + sci_change_state(&ireq->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H); break; default: @@ -1197,11 +1186,11 @@ stp_request_non_data_await_h2d_tc_event(struct scic_sds_request *sci_req, * complete. If a NAK was received, then it is up to * the user to retry the request. */ - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1214,18 +1203,18 @@ stp_request_non_data_await_h2d_tc_event(struct scic_sds_request *sci_req, * parameter length. current sgl and offset is alreay stored in the IO request */ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( - struct scic_sds_request *sci_req, + struct isci_request *ireq, u32 length) { - struct isci_stp_request *stp_req = &sci_req->stp.req; - struct scu_task_context *task_context = sci_req->tc; + struct isci_stp_request *stp_req = &ireq->stp.req; + struct scu_task_context *task_context = ireq->tc; struct scu_sgl_element_pair *sgl_pair; struct scu_sgl_element *current_sgl; /* Recycle the TC and reconstruct it for sending out DATA FIS containing * for the data from current_sgl+offset for the input length */ - sgl_pair = to_sgl_element_pair(sci_req, stp_req->sgl.index); + sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index); if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) current_sgl = &sgl_pair->A; else @@ -1238,12 +1227,12 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( task_context->type.stp.fis_type = FIS_DATA; /* send the new TC out. */ - return scic_controller_continue_io(sci_req); + return scic_controller_continue_io(ireq); } -static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct scic_sds_request *sci_req) +static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct isci_request *ireq) { - struct isci_stp_request *stp_req = &sci_req->stp.req; + struct isci_stp_request *stp_req = &ireq->stp.req; struct scu_sgl_element_pair *sgl_pair; struct scu_sgl_element *sgl; enum sci_status status; @@ -1251,7 +1240,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct sc u32 len = 0; offset = stp_req->sgl.offset; - sgl_pair = to_sgl_element_pair(sci_req, stp_req->sgl.index); + sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index); if (WARN_ONCE(!sgl_pair, "%s: null sgl element", __func__)) return SCI_FAILURE; @@ -1267,7 +1256,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct sc return SCI_SUCCESS; if (stp_req->pio_len >= len) { - status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, len); + status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(ireq, len); if (status != SCI_SUCCESS) return status; stp_req->pio_len -= len; @@ -1276,7 +1265,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct sc sgl = pio_sgl_next(stp_req); offset = 0; } else if (stp_req->pio_len < len) { - scic_sds_stp_request_pio_data_out_trasmit_data_frame(sci_req, stp_req->pio_len); + scic_sds_stp_request_pio_data_out_trasmit_data_frame(ireq, stp_req->pio_len); /* Sgl offset will be adjusted and saved for future */ offset += stp_req->pio_len; @@ -1302,7 +1291,6 @@ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req, u8 *data_buf, u32 len) { - struct scic_sds_request *sci_req; struct isci_request *ireq; u8 *src_addr; int copy_len; @@ -1311,8 +1299,7 @@ scic_sds_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_r void *kaddr; int total_len = len; - sci_req = to_sci_req(stp_req); - ireq = sci_req_to_ireq(sci_req); + ireq = to_ireq(stp_req); task = isci_request_access_task(ireq); src_addr = data_buf; @@ -1373,18 +1360,18 @@ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( } static enum sci_status -stp_request_pio_await_h2d_completion_tc_event(struct scic_sds_request *sci_req, +stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq, u32 completion_code) { enum sci_status status = SCI_SUCCESS; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); break; default: @@ -1392,11 +1379,11 @@ stp_request_pio_await_h2d_completion_tc_event(struct scic_sds_request *sci_req, * complete. If a NAK was received, then it is up to * the user to retry the request. */ - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1404,18 +1391,18 @@ stp_request_pio_await_h2d_completion_tc_event(struct scic_sds_request *sci_req, } static enum sci_status -pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req, +pio_data_out_tx_done_tc_event(struct isci_request *ireq, u32 completion_code) { enum sci_status status = SCI_SUCCESS; bool all_frames_transferred = false; - struct isci_stp_request *stp_req = &sci_req->stp.req; + struct isci_stp_request *stp_req = &ireq->stp.req; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): /* Transmit data */ if (stp_req->pio_len != 0) { - status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); + status = scic_sds_stp_request_pio_data_out_transmit_data(ireq); if (status == SCI_SUCCESS) { if (stp_req->pio_len == 0) all_frames_transferred = true; @@ -1433,7 +1420,7 @@ pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req, /* * Change the state to SCI_REQ_STP_PIO_DATA_IN * and wait for PIO_SETUP fis / or D2H REg fis. */ - sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); } break; @@ -1444,11 +1431,11 @@ pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req, * the request. */ scic_sds_request_set_status( - sci_req, + ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1456,18 +1443,18 @@ pio_data_out_tx_done_tc_event(struct scic_sds_request *sci_req, } static void scic_sds_stp_request_udma_complete_request( - struct scic_sds_request *request, + struct isci_request *ireq, u32 scu_status, enum sci_status sci_status) { - scic_sds_request_set_status(request, scu_status, sci_status); - sci_change_state(&request->sm, SCI_REQ_COMPLETED); + scic_sds_request_set_status(ireq, scu_status, sci_status); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } -static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct scic_sds_request *sci_req, +static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct isci_request *ireq, u32 frame_index) { - struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_controller *scic = ireq->owning_controller; struct dev_to_host_fis *frame_header; enum sci_status status; u32 *frame_buffer; @@ -1482,7 +1469,7 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct sc frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + scic_sds_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); } @@ -1493,16 +1480,16 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct sc } enum sci_status -scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, +scic_sds_io_request_frame_handler(struct isci_request *ireq, u32 frame_index) { - struct scic_sds_controller *scic = sci_req->owning_controller; - struct isci_stp_request *stp_req = &sci_req->stp.req; + struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_stp_request *stp_req = &ireq->stp.req; enum sci_base_request_states state; enum sci_status status; ssize_t word_cnt; - state = sci_req->sm.current_state_id; + state = ireq->sm.current_state_id; switch (state) { case SCI_REQ_STARTED: { struct ssp_frame_hdr ssp_hdr; @@ -1523,24 +1510,24 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, frame_index, (void **)&resp_iu); - sci_swab32_cpy(&sci_req->ssp.rsp, resp_iu, word_cnt); + sci_swab32_cpy(&ireq->ssp.rsp, resp_iu, word_cnt); - resp_iu = &sci_req->ssp.rsp; + resp_iu = &ireq->ssp.rsp; if (resp_iu->datapres == 0x01 || resp_iu->datapres == 0x02) { - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); } else - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); } else { /* not a response frame, why did it get forwarded? */ dev_err(scic_to_dev(scic), "%s: SCIC IO Request 0x%p received unexpected " - "frame %d type 0x%02x\n", __func__, sci_req, + "frame %d type 0x%02x\n", __func__, ireq, frame_index, ssp_hdr.frame_type); } @@ -1554,13 +1541,13 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, } case SCI_REQ_TASK_WAIT_TC_RESP: - scic_sds_io_request_copy_response(sci_req); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + scic_sds_io_request_copy_response(ireq); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); scic_sds_controller_release_frame(scic,frame_index); return SCI_SUCCESS; case SCI_REQ_SMP_WAIT_RESP: { - struct smp_resp *rsp_hdr = &sci_req->smp.rsp; + struct smp_resp *rsp_hdr = &ireq->smp.rsp; void *frame_header; scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, @@ -1584,10 +1571,10 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, smp_resp, word_cnt); - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_change_state(&sci_req->sm, SCI_REQ_SMP_WAIT_TC_COMP); + sci_change_state(&ireq->sm, SCI_REQ_SMP_WAIT_TC_COMP); } else { /* * This was not a response frame why did it get @@ -1597,15 +1584,15 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, "%s: SCIC SMP Request 0x%p received unexpected " "frame %d type 0x%02x\n", __func__, - sci_req, + ireq, frame_index, rsp_hdr->frame_type); - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_SMP_FRM_TYPE_ERR, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } scic_sds_controller_release_frame(scic, frame_index); @@ -1614,18 +1601,18 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, } case SCI_REQ_STP_UDMA_WAIT_TC_COMP: - return scic_sds_stp_request_udma_general_frame_handler(sci_req, + return scic_sds_stp_request_udma_general_frame_handler(ireq, frame_index); case SCI_REQ_STP_UDMA_WAIT_D2H: /* Use the general frame handler to copy the resposne data */ - status = scic_sds_stp_request_udma_general_frame_handler(sci_req, + status = scic_sds_stp_request_udma_general_frame_handler(ireq, frame_index); if (status != SCI_SUCCESS) return status; - scic_sds_stp_request_udma_complete_request(sci_req, + scic_sds_stp_request_udma_complete_request(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); @@ -1657,12 +1644,12 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + scic_sds_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); /* The command has completed with error */ - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_CHECK_RESPONSE, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); break; @@ -1672,12 +1659,12 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, "violation occurred\n", __func__, stp_req, frame_index); - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_UNEXP_FIS, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_UNEXP_FIS, SCI_FAILURE_PROTOCOL_VIOLATION); break; } - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame(scic, frame_index); @@ -1686,7 +1673,6 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, } case SCI_REQ_STP_PIO_WAIT_FRAME: { - struct isci_request *ireq = sci_req_to_ireq(sci_req); struct sas_task *task = isci_request_access_task(ireq); struct dev_to_host_fis *frame_header; u32 *frame_buffer; @@ -1722,28 +1708,28 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, /* status: 4th byte in the 3rd dword */ stp_req->status = (frame_buffer[2] >> 24) & 0xff; - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + scic_sds_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); - sci_req->stp.rsp.status = stp_req->status; + ireq->stp.rsp.status = stp_req->status; /* The next state is dependent on whether the * request was PIO Data-in or Data out */ if (task->data_dir == DMA_FROM_DEVICE) { - sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_DATA_IN); + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_IN); } else if (task->data_dir == DMA_TO_DEVICE) { /* Transmit data */ - status = scic_sds_stp_request_pio_data_out_transmit_data(sci_req); + status = scic_sds_stp_request_pio_data_out_transmit_data(ireq); if (status != SCI_SUCCESS) break; - sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_DATA_OUT); + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_OUT); } break; case FIS_SETDEVBITS: - sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); break; case FIS_REGD2H: @@ -1767,15 +1753,15 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&sci_req->stp.req, + scic_sds_controller_copy_sata_response(&ireq->stp.req, frame_header, frame_buffer); - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; default: @@ -1818,11 +1804,11 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, frame_index, frame_header->fis_type); - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame is decoded return it to the controller */ scic_sds_controller_release_frame(scic, frame_index); @@ -1830,7 +1816,7 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, } if (stp_req->sgl.index < 0) { - sci_req->saved_rx_frame_index = frame_index; + ireq->saved_rx_frame_index = frame_index; stp_req->pio_len = 0; } else { scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, @@ -1851,13 +1837,13 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, return status; if ((stp_req->status & ATA_BUSY) == 0) { - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } else { - sci_change_state(&sci_req->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); } return status; } @@ -1886,12 +1872,12 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&sci_req->stp.rsp, + scic_sds_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); /* The command has completed with error */ - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); break; @@ -1904,13 +1890,13 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, stp_req, frame_index); - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_UNEXP_FIS, SCI_FAILURE_PROTOCOL_VIOLATION); break; } - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame has been decoded return it to the controller */ scic_sds_controller_release_frame(scic, frame_index); @@ -1938,14 +1924,14 @@ scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, } } -static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request *sci_req, +static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq, u32 completion_code) { enum sci_status status = SCI_SUCCESS; switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_stp_request_udma_complete_request(sci_req, + scic_sds_stp_request_udma_complete_request(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; @@ -1955,11 +1941,11 @@ static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request * * Register FIS was received before we got the TC * completion. */ - if (sci_req->stp.rsp.fis_type == FIS_REGD2H) { - scic_sds_remote_device_suspend(sci_req->target_device, + if (ireq->stp.rsp.fis_type == FIS_REGD2H) { + scic_sds_remote_device_suspend(ireq->target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); - scic_sds_stp_request_udma_complete_request(sci_req, + scic_sds_stp_request_udma_complete_request(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); } else { @@ -1968,7 +1954,7 @@ static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request * * the device so we must change state to wait * for it */ - sci_change_state(&sci_req->sm, SCI_REQ_STP_UDMA_WAIT_D2H); + sci_change_state(&ireq->sm, SCI_REQ_STP_UDMA_WAIT_D2H); } break; @@ -1983,12 +1969,12 @@ static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request * case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): - scic_sds_remote_device_suspend(sci_req->target_device, + scic_sds_remote_device_suspend(ireq->target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); /* Fall through to the default case */ default: /* All other completion status cause the IO to be complete. */ - scic_sds_stp_request_udma_complete_request(sci_req, + scic_sds_stp_request_udma_complete_request(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); break; @@ -1998,15 +1984,15 @@ static enum sci_status stp_request_udma_await_tc_event(struct scic_sds_request * } static enum sci_status -stp_request_soft_reset_await_h2d_asserted_tc_event(struct scic_sds_request *sci_req, +stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_change_state(&sci_req->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG); + sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG); break; default: @@ -2015,11 +2001,11 @@ stp_request_soft_reset_await_h2d_asserted_tc_event(struct scic_sds_request *sci_ * If a NAK was received, then it is up to the user to retry * the request. */ - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -2027,15 +2013,15 @@ stp_request_soft_reset_await_h2d_asserted_tc_event(struct scic_sds_request *sci_ } static enum sci_status -stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct scic_sds_request *sci_req, +stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, u32 completion_code) { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(sci_req, SCU_TASK_DONE_GOOD, + scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); - sci_change_state(&sci_req->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H); + sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H); break; default: @@ -2043,11 +2029,11 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct scic_sds_request *sc * a NAK was received, then it is up to the user to retry the * request. */ - scic_sds_request_set_status(sci_req, + scic_sds_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - sci_change_state(&sci_req->sm, SCI_REQ_COMPLETED); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -2055,54 +2041,54 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct scic_sds_request *sc } enum sci_status -scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, +scic_sds_io_request_tc_completion(struct isci_request *ireq, u32 completion_code) { enum sci_base_request_states state; - struct scic_sds_controller *scic = sci_req->owning_controller; + struct scic_sds_controller *scic = ireq->owning_controller; - state = sci_req->sm.current_state_id; + state = ireq->sm.current_state_id; switch (state) { case SCI_REQ_STARTED: - return request_started_state_tc_event(sci_req, completion_code); + return request_started_state_tc_event(ireq, completion_code); case SCI_REQ_TASK_WAIT_TC_COMP: - return ssp_task_request_await_tc_event(sci_req, + return ssp_task_request_await_tc_event(ireq, completion_code); case SCI_REQ_SMP_WAIT_RESP: - return smp_request_await_response_tc_event(sci_req, + return smp_request_await_response_tc_event(ireq, completion_code); case SCI_REQ_SMP_WAIT_TC_COMP: - return smp_request_await_tc_event(sci_req, completion_code); + return smp_request_await_tc_event(ireq, completion_code); case SCI_REQ_STP_UDMA_WAIT_TC_COMP: - return stp_request_udma_await_tc_event(sci_req, + return stp_request_udma_await_tc_event(ireq, completion_code); case SCI_REQ_STP_NON_DATA_WAIT_H2D: - return stp_request_non_data_await_h2d_tc_event(sci_req, + return stp_request_non_data_await_h2d_tc_event(ireq, completion_code); case SCI_REQ_STP_PIO_WAIT_H2D: - return stp_request_pio_await_h2d_completion_tc_event(sci_req, + return stp_request_pio_await_h2d_completion_tc_event(ireq, completion_code); case SCI_REQ_STP_PIO_DATA_OUT: - return pio_data_out_tx_done_tc_event(sci_req, completion_code); + return pio_data_out_tx_done_tc_event(ireq, completion_code); case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: - return stp_request_soft_reset_await_h2d_asserted_tc_event(sci_req, + return stp_request_soft_reset_await_h2d_asserted_tc_event(ireq, completion_code); case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: - return stp_request_soft_reset_await_h2d_diagnostic_tc_event(sci_req, + return stp_request_soft_reset_await_h2d_diagnostic_tc_event(ireq, completion_code); case SCI_REQ_ABORTING: - return request_aborting_state_tc_event(sci_req, + return request_aborting_state_tc_event(ireq, completion_code); default: @@ -2201,7 +2187,7 @@ static void isci_request_handle_controller_specific_errors( { unsigned int cstatus; - cstatus = request->sci.scu_status; + cstatus = request->scu_status; dev_dbg(&request->isci_host->pdev->dev, "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR " @@ -2640,13 +2626,13 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, task); if (sas_protocol_ata(task->task_proto)) { - resp_buf = &request->sci.stp.rsp; + resp_buf = &request->stp.rsp; isci_request_process_stp_response(task, resp_buf); } else if (SAS_PROTOCOL_SSP == task->task_proto) { /* crack the iu response buffer. */ - resp_iu = &request->sci.ssp.rsp; + resp_iu = &request->ssp.rsp; isci_request_process_response_iu(task, resp_iu, &isci_host->pdev->dev); @@ -2677,7 +2663,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); if (task->task_proto == SAS_PROTOCOL_SMP) { - void *rsp = &request->sci.smp.rsp; + void *rsp = &request->smp.rsp; dev_dbg(&isci_host->pdev->dev, "%s: SMP protocol completion\n", @@ -2693,7 +2679,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, * There is a possibility that less data than * the maximum was transferred. */ - u32 transferred_length = sci_req_tx_bytes(&request->sci); + u32 transferred_length = sci_req_tx_bytes(request); task->task_status.residual = task->total_xfer_len - transferred_length; @@ -2851,8 +2837,8 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, /* complete the io request to the core. */ scic_controller_complete_io(&isci_host->sci, - request->sci.target_device, - &request->sci); + request->target_device, + request); isci_put_device(idev); /* set terminated handle so it cannot be completed or @@ -2864,9 +2850,8 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); - struct isci_request *ireq = sci_req_to_ireq(sci_req); - struct domain_device *dev = sci_dev_to_domain(sci_req->target_device); + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct domain_device *dev = sci_dev_to_domain(ireq->target_device); struct sas_task *task; /* XXX as hch said always creating an internal sas_task for tmf @@ -2902,66 +2887,65 @@ static void scic_sds_request_started_state_enter(struct sci_base_state_machine * static void scic_sds_request_completed_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); - struct scic_sds_controller *scic = sci_req->owning_controller; + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct scic_sds_controller *scic = ireq->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_request *ireq = sci_req_to_ireq(sci_req); /* Tell the SCI_USER that the IO request is complete */ if (!test_bit(IREQ_TMF, &ireq->flags)) isci_request_io_request_complete(ihost, ireq, - sci_req->sci_status); + ireq->sci_status); else - isci_task_request_complete(ihost, ireq, sci_req->sci_status); + isci_task_request_complete(ihost, ireq, ireq->sci_status); } static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); /* Setting the abort bit in the Task Context is required by the silicon. */ - sci_req->tc->abort = 1; + ireq->tc->abort = 1; } static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - scic_sds_remote_device_set_working_request(sci_req->target_device, - sci_req); + scic_sds_remote_device_set_working_request(ireq->target_device, + ireq); } static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - scic_sds_remote_device_set_working_request(sci_req->target_device, - sci_req); + scic_sds_remote_device_set_working_request(ireq->target_device, + ireq); } static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - scic_sds_remote_device_set_working_request(sci_req->target_device, - sci_req); + scic_sds_remote_device_set_working_request(ireq->target_device, + ireq); } static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) { - struct scic_sds_request *sci_req = container_of(sm, typeof(*sci_req), sm); - struct scu_task_context *tc = sci_req->tc; + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct scu_task_context *tc = ireq->tc; struct host_to_dev_fis *h2d_fis; enum sci_status status; /* Clear the SRST bit */ - h2d_fis = &sci_req->stp.cmd; + h2d_fis = &ireq->stp.cmd; h2d_fis->control = 0; /* Clear the TC control bit */ tc->control_frame = 0; - status = scic_controller_continue_io(sci_req); + status = scic_controller_continue_io(ireq); WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n"); } @@ -3006,29 +2990,29 @@ static const struct sci_base_state scic_sds_request_state_table[] = { static void scic_sds_general_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { - sci_init_sm(&sci_req->sm, scic_sds_request_state_table, SCI_REQ_INIT); + sci_init_sm(&ireq->sm, scic_sds_request_state_table, SCI_REQ_INIT); - sci_req->target_device = sci_dev; - sci_req->protocol = SCIC_NO_PROTOCOL; - sci_req->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; + ireq->target_device = sci_dev; + ireq->protocol = SCIC_NO_PROTOCOL; + ireq->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; - sci_req->sci_status = SCI_SUCCESS; - sci_req->scu_status = 0; - sci_req->post_context = 0xFFFFFFFF; + ireq->sci_status = SCI_SUCCESS; + ireq->scu_status = 0; + ireq->post_context = 0xFFFFFFFF; } static enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req) + struct isci_request *ireq) { struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, sci_req); + scic_sds_general_request_construct(scic, sci_dev, ireq); if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; @@ -3036,31 +3020,31 @@ scic_io_request_construct(struct scic_sds_controller *scic, if (dev->dev_type == SAS_END_DEV) /* pass */; else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) - memset(&sci_req->stp.cmd, 0, sizeof(sci_req->stp.cmd)); + memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd)); else if (dev_is_expander(dev)) /* pass */; else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; - memset(sci_req->tc, 0, offsetof(struct scu_task_context, sgl_pair_ab)); + memset(ireq->tc, 0, offsetof(struct scu_task_context, sgl_pair_ab)); return status; } enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, - u16 io_tag, struct scic_sds_request *sci_req) + u16 io_tag, struct isci_request *ireq) { struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, sci_req); + scic_sds_general_request_construct(scic, sci_dev, ireq); if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { - set_bit(IREQ_TMF, &sci_req_to_ireq(sci_req)->flags); - memset(sci_req->tc, 0, sizeof(struct scu_task_context)); + set_bit(IREQ_TMF, &ireq->flags); + memset(ireq->tc, 0, sizeof(struct scu_task_context)); } else status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; @@ -3076,7 +3060,7 @@ static enum sci_status isci_request_ssp_request_construct( "%s: request = %p\n", __func__, request); - status = scic_io_request_construct_basic_ssp(&request->sci); + status = scic_io_request_construct_basic_ssp(request); return status; } @@ -3097,7 +3081,7 @@ static enum sci_status isci_request_stp_request_construct( */ register_fis = isci_sata_task_to_fis_copy(task); - status = scic_io_request_construct_basic_sata(&request->sci); + status = scic_io_request_construct_basic_sata(request); /* Set the ncq tag in the fis, from the queue * command in the task. @@ -3115,7 +3099,7 @@ static enum sci_status isci_request_stp_request_construct( static enum sci_status scic_io_request_construct_smp(struct device *dev, - struct scic_sds_request *sci_req, + struct isci_request *ireq, struct sas_task *task) { struct scatterlist *sg = &task->smp_task.smp_req; @@ -3158,14 +3142,14 @@ scic_io_request_construct_smp(struct device *dev, if (!dma_map_sg(dev, sg, 1, DMA_TO_DEVICE)) return SCI_FAILURE; - sci_req->protocol = SCIC_SMP_PROTOCOL; + ireq->protocol = SCIC_SMP_PROTOCOL; /* byte swap the smp request. */ - task_context = sci_req->tc; + task_context = ireq->tc; - sci_dev = scic_sds_request_get_device(sci_req); - sci_port = scic_sds_request_get_port(sci_req); + sci_dev = scic_sds_request_get_device(ireq); + sci_port = scic_sds_request_get_port(ireq); /* * Fill in the TC with the its required data @@ -3217,12 +3201,12 @@ scic_io_request_construct_smp(struct device *dev, */ task_context->task_phase = 0; - sci_req->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | (scic_sds_controller_get_protocol_engine_group(scic) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | (scic_sds_port_get_index(sci_port) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(sci_req->io_tag)); + ISCI_TAG_TCI(ireq->io_tag)); /* * Copy the physical address for the command buffer to the SCU Task * Context command buffer should not contain command header. @@ -3234,7 +3218,7 @@ scic_io_request_construct_smp(struct device *dev, task_context->response_iu_upper = 0; task_context->response_iu_lower = 0; - sci_change_state(&sci_req->sm, SCI_REQ_CONSTRUCTED); + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); return SCI_SUCCESS; } @@ -3250,10 +3234,9 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) { struct sas_task *task = isci_request_access_task(ireq); struct device *dev = &ireq->isci_host->pdev->dev; - struct scic_sds_request *sci_req = &ireq->sci; enum sci_status status = SCI_FAILURE; - status = scic_io_request_construct_smp(dev, sci_req, task); + status = scic_io_request_construct_smp(dev, ireq, task); if (status != SCI_SUCCESS) dev_warn(&ireq->isci_host->pdev->dev, "%s: failed with status = %d\n", @@ -3309,7 +3292,7 @@ static enum sci_status isci_io_request_build(struct isci_host *isci_host, } status = scic_io_request_construct(&isci_host->sci, sci_device, - &request->sci); + request); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -3344,7 +3327,7 @@ static struct isci_request *isci_request_from_tag(struct isci_host *ihost, u16 t struct isci_request *ireq; ireq = ihost->reqs[ISCI_TAG_TCI(tag)]; - ireq->sci.io_tag = tag; + ireq->io_tag = tag; ireq->io_request_completion = NULL; ireq->flags = 0; ireq->num_sg_entries = 0; @@ -3416,14 +3399,14 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide */ status = scic_controller_start_task(&ihost->sci, &idev->sci, - &ireq->sci); + ireq); } else { status = SCI_FAILURE; } } else { /* send the request, let the core assign the IO TAG. */ status = scic_controller_start_io(&ihost->sci, &idev->sci, - &ireq->sci); + ireq); } if (status != SCI_SUCCESS && @@ -3446,8 +3429,6 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide list_add(&ireq->dev_node, &idev->reqs_in_process); if (status == SCI_SUCCESS) { - /* Save the tag for possible task mgmt later. */ - ireq->io_tag = ireq->sci.io_tag; isci_request_change_state(ireq, started); } else { /* The request did not really start in the diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 7fd9853..68d8a27 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -93,7 +93,7 @@ enum sci_request_protocol { * isci_stp_request - extra request infrastructure to handle pio/atapi protocol * @pio_len - number of bytes requested at PIO setup * @status - pio setup ending status value to tell us if we need - * to wait for another fis or if the transfer is complete. Upon + * to wait for another fis or if the transfer is complete. Upon * receipt of a d2h fis this will be the status field of that fis. * @sgl - track pio transfer progress as we iterate through the sgl * @device_cdb_len - atapi device advertises it's transfer constraints at setup @@ -110,69 +110,55 @@ struct isci_stp_request { u32 device_cdb_len; }; -struct scic_sds_request { - /* - * This field contains the information for the base request state - * machine. +struct isci_request { + enum isci_request_status status; + #define IREQ_COMPLETE_IN_TARGET 0 + #define IREQ_TERMINATED 1 + #define IREQ_TMF 2 + #define IREQ_ACTIVE 3 + unsigned long flags; + /* XXX kill ttype and ttype_ptr, allocate full sas_task */ + enum task_type ttype; + union ttype_ptr_union { + struct sas_task *io_task_ptr; /* When ttype==io_task */ + struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */ + } ttype_ptr; + struct isci_host *isci_host; + /* For use in the requests_to_{complete|abort} lists: */ + struct list_head completed_node; + /* For use in the reqs_in_process list: */ + struct list_head dev_node; + spinlock_t state_lock; + dma_addr_t request_daddr; + dma_addr_t zero_scatter_daddr; + unsigned int num_sg_entries; + /* Note: "io_request_completion" is completed in two different ways + * depending on whether this is a TMF or regular request. + * - TMF requests are completed in the thread that started them; + * - regular requests are completed in the request completion callback + * function. + * This difference in operation allows the aborter of a TMF request + * to be sure that once the TMF request completes, the I/O that the + * TMF was aborting is guaranteed to have completed. + * + * XXX kill io_request_completion */ + struct completion *io_request_completion; struct sci_base_state_machine sm; - - /* - * This field simply points to the controller to which this IO request - * is associated. - */ struct scic_sds_controller *owning_controller; - - /* - * This field simply points to the remote device to which this IO - * request is associated. - */ struct scic_sds_remote_device *target_device; - - /* - * This field indicates the IO tag for this request. The IO tag is - * comprised of the task_index and a sequence count. The sequence count - * is utilized to help identify tasks from one life to another. - */ u16 io_tag; - - /* - * This field specifies the protocol being utilized for this - * IO request. - */ enum sci_request_protocol protocol; - - /* - * This field indicates the completion status taken from the SCUs - * completion code. It indicates the completion result for the SCU - * hardware. - */ - u32 scu_status; - - /* - * This field indicates the completion status returned to the SCI user. - * It indicates the users view of the io request completion. - */ - u32 sci_status; - - /* - * This field contains the value to be utilized when posting - * (e.g. Post_TC, * Post_TC_Abort) this request to the silicon. - */ + u32 scu_status; /* hardware result */ + u32 sci_status; /* upper layer disposition */ u32 post_context; - struct scu_task_context *tc; - /* could be larger with sg chaining */ #define SCU_SGL_SIZE ((SCI_MAX_SCATTER_GATHER_ELEMENTS + 1) / 2) struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); - - /* - * This field is a pointer to the stored rx frame data. It is used in + /* This field is a pointer to the stored rx frame data. It is used in * STP internal requests and SMP response frames. If this field is * non-NULL the saved frame must be released on IO request completion. - * - * @todo In the future do we want to keep a list of RX frame buffers? */ u32 saved_rx_frame_index; @@ -187,11 +173,9 @@ struct scic_sds_request { u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; }; } ssp; - struct { struct smp_resp rsp; } smp; - struct { struct isci_stp_request req; struct host_to_dev_fis cmd; @@ -200,56 +184,11 @@ struct scic_sds_request { }; }; -static inline struct scic_sds_request *to_sci_req(struct isci_stp_request *stp_req) -{ - struct scic_sds_request *sci_req; - - sci_req = container_of(stp_req, typeof(*sci_req), stp.req); - return sci_req; -} - -struct isci_request { - enum isci_request_status status; - enum task_type ttype; - unsigned short io_tag; - #define IREQ_COMPLETE_IN_TARGET 0 - #define IREQ_TERMINATED 1 - #define IREQ_TMF 2 - #define IREQ_ACTIVE 3 - unsigned long flags; - - union ttype_ptr_union { - struct sas_task *io_task_ptr; /* When ttype==io_task */ - struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */ - } ttype_ptr; - struct isci_host *isci_host; - /* For use in the requests_to_{complete|abort} lists: */ - struct list_head completed_node; - /* For use in the reqs_in_process list: */ - struct list_head dev_node; - spinlock_t state_lock; - dma_addr_t request_daddr; - dma_addr_t zero_scatter_daddr; - - unsigned int num_sg_entries; /* returned by pci_alloc_sg */ - - /** Note: "io_request_completion" is completed in two different ways - * depending on whether this is a TMF or regular request. - * - TMF requests are completed in the thread that started them; - * - regular requests are completed in the request completion callback - * function. - * This difference in operation allows the aborter of a TMF request - * to be sure that once the TMF request completes, the I/O that the - * TMF was aborting is guaranteed to have completed. - */ - struct completion *io_request_completion; - struct scic_sds_request sci; -}; - -static inline struct isci_request *sci_req_to_ireq(struct scic_sds_request *sci_req) +static inline struct isci_request *to_ireq(struct isci_stp_request *stp_req) { - struct isci_request *ireq = container_of(sci_req, typeof(*ireq), sci); + struct isci_request *ireq; + ireq = container_of(stp_req, typeof(*ireq), stp.req); return ireq; } @@ -366,32 +305,32 @@ enum sci_base_request_states { * * This macro will return the controller for this io request object */ -#define scic_sds_request_get_controller(sci_req) \ - ((sci_req)->owning_controller) +#define scic_sds_request_get_controller(ireq) \ + ((ireq)->owning_controller) /** * scic_sds_request_get_device() - * * This macro will return the device for this io request object */ -#define scic_sds_request_get_device(sci_req) \ - ((sci_req)->target_device) +#define scic_sds_request_get_device(ireq) \ + ((ireq)->target_device) /** * scic_sds_request_get_port() - * * This macro will return the port for this io request object */ -#define scic_sds_request_get_port(sci_req) \ - scic_sds_remote_device_get_port(scic_sds_request_get_device(sci_req)) +#define scic_sds_request_get_port(ireq) \ + scic_sds_remote_device_get_port(scic_sds_request_get_device(ireq)) /** * scic_sds_request_get_post_context() - * * This macro returns the constructed post context result for the io request. */ -#define scic_sds_request_get_post_context(sci_req) \ - ((sci_req)->post_context) +#define scic_sds_request_get_post_context(ireq) \ + ((ireq)->post_context) /** * scic_sds_request_get_task_context() - @@ -413,26 +352,25 @@ enum sci_base_request_states { (request)->sci_status = (sci_status_code); \ } -enum sci_status scic_sds_request_start(struct scic_sds_request *sci_req); -enum sci_status scic_sds_io_request_terminate(struct scic_sds_request *sci_req); +enum sci_status scic_sds_request_start(struct isci_request *ireq); +enum sci_status scic_sds_io_request_terminate(struct isci_request *ireq); enum sci_status -scic_sds_io_request_event_handler(struct scic_sds_request *sci_req, +scic_sds_io_request_event_handler(struct isci_request *ireq, u32 event_code); enum sci_status -scic_sds_io_request_frame_handler(struct scic_sds_request *sci_req, +scic_sds_io_request_frame_handler(struct isci_request *ireq, u32 frame_index); enum sci_status -scic_sds_task_request_terminate(struct scic_sds_request *sci_req); +scic_sds_task_request_terminate(struct isci_request *ireq); extern enum sci_status -scic_sds_request_complete(struct scic_sds_request *sci_req); +scic_sds_request_complete(struct isci_request *ireq); extern enum sci_status -scic_sds_io_request_tc_completion(struct scic_sds_request *sci_req, u32 code); +scic_sds_io_request_tc_completion(struct isci_request *ireq, u32 code); /* XXX open code in caller */ static inline dma_addr_t -scic_io_request_get_dma_addr(struct scic_sds_request *sci_req, void *virt_addr) +scic_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr) { - struct isci_request *ireq = sci_req_to_ireq(sci_req); char *requested_addr = (char *)virt_addr; char *base_addr = (char *)ireq; @@ -565,14 +503,14 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, struct scic_sds_remote_device *sci_dev, u16 io_tag, - struct scic_sds_request *sci_req); + struct isci_request *ireq); enum sci_status -scic_task_request_construct_ssp(struct scic_sds_request *sci_req); +scic_task_request_construct_ssp(struct isci_request *ireq); enum sci_status -scic_task_request_construct_sata(struct scic_sds_request *sci_req); +scic_task_request_construct_sata(struct isci_request *ireq); void -scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); -void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); +scic_stp_io_request_set_ncq_tag(struct isci_request *ireq, u16 ncq_tag); +void scic_sds_smp_request_copy_response(struct isci_request *ireq); static inline int isci_task_is_ncq_recovery(struct sas_task *task) { diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index e7ce469..87d8cc1 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -70,7 +70,7 @@ struct host_to_dev_fis *isci_sata_task_to_fis_copy(struct sas_task *task) { struct isci_request *ireq = task->lldd_task; - struct host_to_dev_fis *fis = &ireq->sci.stp.cmd; + struct host_to_dev_fis *fis = &ireq->stp.cmd; memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); @@ -116,7 +116,7 @@ void isci_sata_set_ncq_tag( struct isci_request *request = task->lldd_task; register_fis->sector_count = qc->tag << 3; - scic_stp_io_request_set_ncq_tag(&request->sci, qc->tag); + scic_stp_io_request_set_ncq_tag(request, qc->tag); } /** @@ -154,7 +154,6 @@ void isci_request_process_stp_response(struct sas_task *task, enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) { - struct scic_sds_request *sci_req = &ireq->sci; struct isci_tmf *isci_tmf; enum sci_status status; @@ -167,7 +166,7 @@ enum sci_status isci_sata_management_task_request_build(struct isci_request *ire case isci_tmf_sata_srst_high: case isci_tmf_sata_srst_low: { - struct host_to_dev_fis *fis = &sci_req->stp.cmd; + struct host_to_dev_fis *fis = &ireq->stp.cmd; memset(fis, 0, sizeof(*fis)); @@ -188,7 +187,7 @@ enum sci_status isci_sata_management_task_request_build(struct isci_request *ire /* core builds the protocol specific request * based on the h2d fis. */ - status = scic_task_request_construct_sata(&ireq->sci); + status = scic_task_request_construct_sata(ireq); return status; } diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index d2dba83..700708c 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -258,7 +258,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, /* let the core do it's construct. */ status = scic_task_request_construct(&ihost->sci, &idev->sci, tag, - &ireq->sci); + ireq); if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, @@ -272,7 +272,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, /* XXX convert to get this from task->tproto like other drivers */ if (dev->dev_type == SAS_END_DEV) { isci_tmf->proto = SAS_PROTOCOL_SSP; - status = scic_task_request_construct_ssp(&ireq->sci); + status = scic_task_request_construct_ssp(ireq); if (status != SCI_SUCCESS) return NULL; } @@ -337,7 +337,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, /* start the TMF io. */ status = scic_controller_start_task(&ihost->sci, sci_device, - &ireq->sci); + ireq); if (status != SCI_TASK_SUCCESS) { dev_warn(&ihost->pdev->dev, @@ -371,7 +371,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, scic_controller_terminate_request(&ihost->sci, &isci_device->sci, - &ireq->sci); + ireq); spin_unlock_irqrestore(&ihost->scic_lock, flags); @@ -565,7 +565,7 @@ static void isci_terminate_request_core( status = scic_controller_terminate_request( &isci_host->sci, &isci_device->sci, - &isci_request->sci); + isci_request); } spin_unlock_irqrestore(&isci_host->scic_lock, flags); @@ -1235,7 +1235,6 @@ isci_task_request_complete(struct isci_host *ihost, { struct isci_tmf *tmf = isci_request_access_tmf(ireq); struct completion *tmf_complete; - struct scic_sds_request *sci_req = &ireq->sci; dev_dbg(&ihost->pdev->dev, "%s: request = %p, status=%d\n", @@ -1248,18 +1247,18 @@ isci_task_request_complete(struct isci_host *ihost, if (tmf->proto == SAS_PROTOCOL_SSP) { memcpy(&tmf->resp.resp_iu, - &sci_req->ssp.rsp, + &ireq->ssp.rsp, SSP_RESP_IU_MAX_SIZE); } else if (tmf->proto == SAS_PROTOCOL_SATA) { memcpy(&tmf->resp.d2h_fis, - &sci_req->stp.rsp, + &ireq->stp.rsp, sizeof(struct dev_to_host_fis)); } /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; - scic_controller_complete_io(&ihost->sci, ireq->sci.target_device, &ireq->sci); + scic_controller_complete_io(&ihost->sci, ireq->target_device, ireq); /* set the 'terminated' flag handle to make sure it cannot be terminated * or completed again. */ -- cgit v0.10.2 From 852809559e4680ba4768262a6c3d21454fcd460e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 28 Jun 2011 15:05:53 -0700 Subject: isci: unify isci_phy and scic_sds_phy They are one in the same object so remove the distinction. The near duplicate fields (owning_port, and isci_port) will be cleaned up after the scic_sds_port isci_port unification. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index d91cd6d..c5c2733 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -311,7 +311,7 @@ static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *sc struct isci_host *ihost = scic_to_ihost(scic); struct scu_unsolicited_frame_header *frame_header; - struct scic_sds_phy *phy; + struct isci_phy *iphy; struct scic_sds_remote_device *device; enum sci_status result = SCI_FAILURE; @@ -332,8 +332,8 @@ static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *sc if (frame_header->is_address_frame) { index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - result = scic_sds_phy_frame_handler(phy, frame_index); + iphy = &ihost->phys[index]; + result = scic_sds_phy_frame_handler(iphy, frame_index); } else { index = SCU_GET_COMPLETION_INDEX(completion_entry); @@ -344,8 +344,8 @@ static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *sc * device that has not yet been created. In either case forwared * the frame to the PE and let it take care of the frame data. */ index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - result = scic_sds_phy_frame_handler(phy, frame_index); + iphy = &ihost->phys[index]; + result = scic_sds_phy_frame_handler(iphy, frame_index); } else { if (index < scic->remote_node_entries) device = scic->device_table[index]; @@ -372,7 +372,7 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci struct isci_host *ihost = scic_to_ihost(scic); struct scic_sds_remote_device *device; struct isci_request *ireq; - struct scic_sds_phy *phy; + struct isci_phy *iphy; u32 index; index = SCU_GET_COMPLETION_INDEX(completion_entry); @@ -452,8 +452,8 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci * we get the event notification. This is a type 4 event. */ case SCU_EVENT_TYPE_OSSP_EVENT: index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); - phy = &ihost->phys[index].sci; - scic_sds_phy_event_handler(phy, completion_entry); + iphy = &ihost->phys[index]; + scic_sds_phy_event_handler(iphy, completion_entry); break; case SCU_EVENT_TYPE_RNC_SUSPEND_TX: @@ -862,11 +862,11 @@ static void scic_sds_controller_transition_to_ready( } } -static bool is_phy_starting(struct scic_sds_phy *sci_phy) +static bool is_phy_starting(struct isci_phy *iphy) { enum scic_sds_phy_states state; - state = sci_phy->sm.current_state_id; + state = iphy->sm.current_state_id; switch (state) { case SCI_PHY_STARTING: case SCI_PHY_SUB_INITIAL: @@ -896,7 +896,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro { struct isci_host *ihost = scic_to_ihost(scic); struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; - struct scic_sds_phy *sci_phy; + struct isci_phy *iphy; enum sci_status status; status = SCI_SUCCESS; @@ -910,10 +910,10 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro u8 index; for (index = 0; index < SCI_MAX_PHYS; index++) { - sci_phy = &ihost->phys[index].sci; - state = sci_phy->sm.current_state_id; + iphy = &ihost->phys[index]; + state = iphy->sm.current_state_id; - if (!phy_get_non_dummy_port(sci_phy)) + if (!phy_get_non_dummy_port(iphy)) continue; /* The controller start operation is complete iff: @@ -922,9 +922,9 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro * - have an indication of a connected device and it has * finished the link training process. */ - if ((sci_phy->is_in_link_training == false && state == SCI_PHY_INITIAL) || - (sci_phy->is_in_link_training == false && state == SCI_PHY_STOPPED) || - (sci_phy->is_in_link_training == true && is_phy_starting(sci_phy))) { + if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) || + (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) || + (iphy->is_in_link_training == true && is_phy_starting(iphy))) { is_controller_start_complete = false; break; } @@ -939,10 +939,10 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro scic->phy_startup_timer_pending = false; } } else { - sci_phy = &ihost->phys[scic->next_phy_to_start].sci; + iphy = &ihost->phys[scic->next_phy_to_start]; if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - if (phy_get_non_dummy_port(sci_phy) == NULL) { + if (phy_get_non_dummy_port(iphy) == NULL) { scic->next_phy_to_start++; /* Caution recursion ahead be forwarned @@ -958,7 +958,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro } } - status = scic_sds_phy_start(sci_phy); + status = scic_sds_phy_start(iphy); if (status == SCI_SUCCESS) { sci_mod_timer(&scic->phy_timer, @@ -970,7 +970,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro "to stop phy %d because of status " "%d.\n", __func__, - ihost->phys[scic->next_phy_to_start].sci.phy_index, + ihost->phys[scic->next_phy_to_start].phy_index, status); } @@ -1312,8 +1312,8 @@ void isci_host_deinit(struct isci_host *ihost) /* Cancel any/all outstanding phy timers */ for (i = 0; i < SCI_MAX_PHYS; i++) { - struct scic_sds_phy *sci_phy = &ihost->phys[i].sci; - del_timer_sync(&sci_phy->sata_timer.timer); + struct isci_phy *iphy = &ihost->phys[i]; + del_timer_sync(&iphy->sata_timer.timer); } del_timer_sync(&ihost->sci.port_agent.timer.timer); @@ -1527,7 +1527,7 @@ static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller status = SCI_SUCCESS; for (index = 0; index < SCI_MAX_PHYS; index++) { - phy_status = scic_sds_phy_stop(&ihost->phys[index].sci); + phy_status = scic_sds_phy_stop(&ihost->phys[index]); if (phy_status != SCI_SUCCESS && phy_status != SCI_FAILURE_INVALID_STATE) { @@ -1537,7 +1537,7 @@ static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller "%s: Controller stop operation failed to stop " "phy %d because of status %d.\n", __func__, - ihost->phys[index].sci.phy_index, phy_status); + ihost->phys[index].phy_index, phy_status); } } @@ -1786,7 +1786,7 @@ static enum sci_status scic_controller_construct(struct scic_sds_controller *sci /* Construct the phys for this controller */ for (i = 0; i < SCI_MAX_PHYS; i++) { /* Add all the PHYs to the dummy port */ - scic_sds_phy_construct(&ihost->phys[i].sci, + scic_sds_phy_construct(&ihost->phys[i], &ihost->ports[SCI_MAX_PORTS].sci, i); } @@ -1865,7 +1865,7 @@ static void power_control_timeout(unsigned long data) struct sci_timer *tmr = (struct sci_timer *)data; struct scic_sds_controller *scic = container_of(tmr, typeof(*scic), power_control.timer); struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_phy *sci_phy; + struct isci_phy *iphy; unsigned long flags; u8 i; @@ -1886,8 +1886,8 @@ static void power_control_timeout(unsigned long data) if (scic->power_control.phys_waiting == 0) break; - sci_phy = scic->power_control.requesters[i]; - if (sci_phy == NULL) + iphy = scic->power_control.requesters[i]; + if (iphy == NULL) continue; if (scic->power_control.phys_granted_power >= @@ -1897,7 +1897,7 @@ static void power_control_timeout(unsigned long data) scic->power_control.requesters[i] = NULL; scic->power_control.phys_waiting--; scic->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(sci_phy); + scic_sds_phy_consume_power_handler(iphy); } /* @@ -1919,14 +1919,14 @@ done: */ void scic_sds_controller_power_control_queue_insert( struct scic_sds_controller *scic, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { - BUG_ON(sci_phy == NULL); + BUG_ON(iphy == NULL); if (scic->power_control.phys_granted_power < scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { scic->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(sci_phy); + scic_sds_phy_consume_power_handler(iphy); /* * stop and start the power_control timer. When the timer fires, the @@ -1941,7 +1941,7 @@ void scic_sds_controller_power_control_queue_insert( } else { /* Add the phy in the waiting list */ - scic->power_control.requesters[sci_phy->phy_index] = sci_phy; + scic->power_control.requesters[iphy->phy_index] = iphy; scic->power_control.phys_waiting++; } } @@ -1954,15 +1954,15 @@ void scic_sds_controller_power_control_queue_insert( */ void scic_sds_controller_power_control_queue_remove( struct scic_sds_controller *scic, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { - BUG_ON(sci_phy == NULL); + BUG_ON(iphy == NULL); - if (scic->power_control.requesters[sci_phy->phy_index] != NULL) { + if (scic->power_control.requesters[iphy->phy_index] != NULL) { scic->power_control.phys_waiting--; } - scic->power_control.requesters[sci_phy->phy_index] = NULL; + scic->power_control.requesters[iphy->phy_index] = NULL; } #define AFE_REGISTER_WRITE_DELAY 10 @@ -2225,7 +2225,7 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc * are accessed during the port initialization. */ for (i = 0; i < SCI_MAX_PHYS; i++) { - result = scic_sds_phy_initialize(&ihost->phys[i].sci, + result = scic_sds_phy_initialize(&ihost->phys[i], &scic->scu_registers->peg0.pe[i].tl, &scic->scu_registers->peg0.pe[i].ll); if (result != SCI_SUCCESS) @@ -2484,43 +2484,43 @@ int isci_host_init(struct isci_host *isci_host) } void scic_sds_controller_link_up(struct scic_sds_controller *scic, - struct scic_sds_port *port, struct scic_sds_phy *phy) + struct scic_sds_port *port, struct isci_phy *iphy) { switch (scic->sm.current_state_id) { case SCIC_STARTING: sci_del_timer(&scic->phy_timer); scic->phy_startup_timer_pending = false; scic->port_agent.link_up_handler(scic, &scic->port_agent, - port, phy); + port, iphy); scic_sds_controller_start_next_phy(scic); break; case SCIC_READY: scic->port_agent.link_up_handler(scic, &scic->port_agent, - port, phy); + port, iphy); break; default: dev_dbg(scic_to_dev(scic), "%s: SCIC Controller linkup event from phy %d in " - "unexpected state %d\n", __func__, phy->phy_index, + "unexpected state %d\n", __func__, iphy->phy_index, scic->sm.current_state_id); } } void scic_sds_controller_link_down(struct scic_sds_controller *scic, - struct scic_sds_port *port, struct scic_sds_phy *phy) + struct scic_sds_port *port, struct isci_phy *iphy) { switch (scic->sm.current_state_id) { case SCIC_STARTING: case SCIC_READY: scic->port_agent.link_down_handler(scic, &scic->port_agent, - port, phy); + port, iphy); break; default: dev_dbg(scic_to_dev(scic), "%s: SCIC Controller linkdown event from phy %d in " "unexpected state %d\n", __func__, - phy->phy_index, + iphy->phy_index, scic->sm.current_state_id); } } diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 0b26d25..1edd135 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -101,14 +101,14 @@ struct scic_power_control { * This field is an array of phys that we are waiting on. The phys are direct * mapped into requesters via struct scic_sds_phy.phy_index */ - struct scic_sds_phy *requesters[SCI_MAX_PHYS]; + struct isci_phy *requesters[SCI_MAX_PHYS]; }; struct scic_sds_port_configuration_agent; typedef void (*port_config_fn)(struct scic_sds_controller *, struct scic_sds_port_configuration_agent *, - struct scic_sds_port *, struct scic_sds_phy *); + struct scic_sds_port *, struct isci_phy *); struct scic_sds_port_configuration_agent { u16 phy_configured_mask; @@ -523,9 +523,8 @@ static inline struct device *scic_to_dev(struct scic_sds_controller *scic) return &scic_to_ihost(scic)->pdev->dev; } -static inline struct device *sciphy_to_dev(struct scic_sds_phy *sci_phy) +static inline struct device *sciphy_to_dev(struct isci_phy *iphy) { - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) return NULL; @@ -606,21 +605,21 @@ struct isci_request *scic_request_by_tag(struct scic_sds_controller *scic, void scic_sds_controller_power_control_queue_insert( struct scic_sds_controller *scic, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); void scic_sds_controller_power_control_queue_remove( struct scic_sds_controller *scic, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); void scic_sds_controller_link_up( struct scic_sds_controller *scic, struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); void scic_sds_controller_link_down( struct scic_sds_controller *scic, struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); void scic_sds_controller_remote_device_stopped( struct scic_sds_controller *scic, @@ -651,7 +650,7 @@ void isci_host_deinit( void isci_host_port_link_up( struct isci_host *, struct scic_sds_port *, - struct scic_sds_phy *); + struct isci_phy *); int isci_host_dev_found(struct domain_device *); void isci_host_remote_device_start_complete( diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 98d93ae..0e60fb7 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -62,9 +62,9 @@ /* Maximum arbitration wait time in micro-seconds */ #define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) -enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) +enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy) { - return sci_phy->max_negotiated_speed; + return iphy->max_negotiated_speed; } /* @@ -80,23 +80,23 @@ enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy) * enum sci_status */ static enum sci_status scic_sds_phy_transport_layer_initialization( - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, struct scu_transport_layer_registers __iomem *transport_layer_registers) { u32 tl_control; - sci_phy->transport_layer_registers = transport_layer_registers; + iphy->transport_layer_registers = transport_layer_registers; writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, - &sci_phy->transport_layer_registers->stp_rni); + &iphy->transport_layer_registers->stp_rni); /* * Hardware team recommends that we enable the STP prefetch for all * transports */ - tl_control = readl(&sci_phy->transport_layer_registers->control); + tl_control = readl(&iphy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); - writel(tl_control, &sci_phy->transport_layer_registers->control); + writel(tl_control, &iphy->transport_layer_registers->control); return SCI_SUCCESS; } @@ -109,12 +109,12 @@ static enum sci_status scic_sds_phy_transport_layer_initialization( * enum sci_status */ static enum sci_status -scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, +scic_sds_phy_link_layer_initialization(struct isci_phy *iphy, struct scu_link_layer_registers __iomem *link_layer_registers) { struct scic_sds_controller *scic = - sci_phy->owning_port->owning_controller; - int phy_idx = sci_phy->phy_index; + iphy->owning_port->owning_controller; + int phy_idx = iphy->phy_index; struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx]; struct sci_phy_oem_params *phy_oem = @@ -126,7 +126,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, u32 llctl, link_rate; u32 clksm_value = 0; - sci_phy->link_layer_registers = link_layer_registers; + iphy->link_layer_registers = link_layer_registers; /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 @@ -136,32 +136,32 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), - &sci_phy->link_layer_registers->transmit_identification); + &iphy->link_layer_registers->transmit_identification); /* Write the device SAS Address */ writel(0xFEDCBA98, - &sci_phy->link_layer_registers->sas_device_name_high); - writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); + &iphy->link_layer_registers->sas_device_name_high); + writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low); /* Write the source SAS Address */ writel(phy_oem->sas_address.high, - &sci_phy->link_layer_registers->source_sas_address_high); + &iphy->link_layer_registers->source_sas_address_high); writel(phy_oem->sas_address.low, - &sci_phy->link_layer_registers->source_sas_address_low); + &iphy->link_layer_registers->source_sas_address_low); /* Clear and Set the PHY Identifier */ - writel(0, &sci_phy->link_layer_registers->identify_frame_phy_id); + writel(0, &iphy->link_layer_registers->identify_frame_phy_id); writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), - &sci_phy->link_layer_registers->identify_frame_phy_id); + &iphy->link_layer_registers->identify_frame_phy_id); /* Change the initial state of the phy configuration register */ phy_configuration = - readl(&sci_phy->link_layer_registers->phy_configuration); + readl(&iphy->link_layer_registers->phy_configuration); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); writel(phy_configuration, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); /* Configure the SNW capabilities */ phy_cap.all = 0; @@ -191,14 +191,14 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, if ((parity_count % 2) != 0) phy_cap.parity = 1; - writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities); + writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup */ writel(SCU_ENSPINUP_GEN_VAL(COUNT, phy_user->notify_enable_spin_up_insertion_frequency), - &sci_phy->link_layer_registers->notify_enable_spinup_control); + &iphy->link_layer_registers->notify_enable_spinup_control); /* Write the ALIGN Insertion Ferequency for connected phy and * inpendent of connected state @@ -209,11 +209,11 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, phy_user->align_insertion_frequency); - writel(clksm_value, &sci_phy->link_layer_registers->clock_skew_management); + writel(clksm_value, &iphy->link_layer_registers->clock_skew_management); /* @todo Provide a way to write this register correctly */ writel(0x02108421, - &sci_phy->link_layer_registers->afe_lookup_table_control); + &iphy->link_layer_registers->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, (u8)scic->user_parameters.sds1.no_outbound_task_timeout); @@ -230,7 +230,7 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, break; } llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); - writel(llctl, &sci_phy->link_layer_registers->link_layer_control); + writel(llctl, &iphy->link_layer_registers->link_layer_control); if (is_a0() || is_a2()) { /* Program the max ARB time for the PHY to 700us so we inter-operate with @@ -239,14 +239,14 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, * generate the break. */ writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, - &sci_phy->link_layer_registers->maximum_arbitration_wait_timer_timeout); + &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout); } /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */ - writel(0, &sci_phy->link_layer_registers->link_layer_hang_detection_timeout); + writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STOPPED); + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); return SCI_SUCCESS; } @@ -254,8 +254,8 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, static void phy_sata_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; - struct scic_sds_phy *sci_phy = container_of(tmr, typeof(*sci_phy), sata_timer); - struct isci_host *ihost = scic_to_ihost(sci_phy->owning_port->owning_controller); + struct isci_phy *iphy = container_of(tmr, typeof(*iphy), sata_timer); + struct isci_host *ihost = scic_to_ihost(iphy->owning_port->owning_controller); unsigned long flags; spin_lock_irqsave(&ihost->scic_lock, flags); @@ -263,13 +263,13 @@ static void phy_sata_timeout(unsigned long data) if (tmr->cancel) goto done; - dev_dbg(sciphy_to_dev(sci_phy), + dev_dbg(sciphy_to_dev(iphy), "%s: SCIC SDS Phy 0x%p did not receive signature fis before " "timeout.\n", __func__, - sci_phy); + iphy); - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } @@ -287,30 +287,30 @@ done: * values indicate a handle/pointer to the port containing the phy. */ struct scic_sds_port *phy_get_non_dummy_port( - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { - if (scic_sds_port_get_index(sci_phy->owning_port) == SCIC_SDS_DUMMY_PORT) + if (scic_sds_port_get_index(iphy->owning_port) == SCIC_SDS_DUMMY_PORT) return NULL; - return sci_phy->owning_port; + return iphy->owning_port; } /** * This method will assign a port to the phy object. - * @out]: sci_phy This parameter specifies the phy for which to assign a port + * @out]: iphy This parameter specifies the phy for which to assign a port * object. * * */ void scic_sds_phy_set_port( - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, struct scic_sds_port *sci_port) { - sci_phy->owning_port = sci_port; + iphy->owning_port = sci_port; - if (sci_phy->bcn_received_while_port_unassigned) { - sci_phy->bcn_received_while_port_unassigned = false; - scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); + if (iphy->bcn_received_while_port_unassigned) { + iphy->bcn_received_while_port_unassigned = false; + scic_sds_port_broadcast_change_received(iphy->owning_port, iphy); } } @@ -322,22 +322,22 @@ void scic_sds_phy_set_port( * enum sci_status */ enum sci_status scic_sds_phy_initialize( - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, struct scu_transport_layer_registers __iomem *transport_layer_registers, struct scu_link_layer_registers __iomem *link_layer_registers) { /* Perfrom the initialization of the TL hardware */ scic_sds_phy_transport_layer_initialization( - sci_phy, + iphy, transport_layer_registers); /* Perofrm the initialization of the PE hardware */ - scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers); + scic_sds_phy_link_layer_initialization(iphy, link_layer_registers); /* * There is nothing that needs to be done in this state just * transition to the stopped state. */ - sci_change_state(&sci_phy->sm, SCI_PHY_STOPPED); + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); return SCI_SUCCESS; } @@ -345,27 +345,27 @@ enum sci_status scic_sds_phy_initialize( /** * This method assigns the direct attached device ID for this phy. * - * @sci_phy The phy for which the direct attached device id is to + * @iphy The phy for which the direct attached device id is to * be assigned. * @device_id The direct attached device ID to assign to the phy. * This will either be the RNi for the device or an invalid RNi if there * is no current device assigned to the phy. */ void scic_sds_phy_setup_transport( - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, u32 device_id) { u32 tl_control; - writel(device_id, &sci_phy->transport_layer_registers->stp_rni); + writel(device_id, &iphy->transport_layer_registers->stp_rni); /* * The read should guarantee that the first write gets posted * before the next write */ - tl_control = readl(&sci_phy->transport_layer_registers->control); + tl_control = readl(&iphy->transport_layer_registers->control); tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); - writel(tl_control, &sci_phy->transport_layer_registers->control); + writel(tl_control, &iphy->transport_layer_registers->control); } /** @@ -376,75 +376,74 @@ void scic_sds_phy_setup_transport( * hardware protocol engine. none */ static void scic_sds_phy_suspend( - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); + readl(&iphy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); scic_sds_phy_setup_transport( - sci_phy, + iphy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } -void scic_sds_phy_resume(struct scic_sds_phy *sci_phy) +void scic_sds_phy_resume(struct isci_phy *iphy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); + readl(&iphy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); } -void scic_sds_phy_get_sas_address(struct scic_sds_phy *sci_phy, +void scic_sds_phy_get_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas_address) { - sas_address->high = readl(&sci_phy->link_layer_registers->source_sas_address_high); - sas_address->low = readl(&sci_phy->link_layer_registers->source_sas_address_low); + sas_address->high = readl(&iphy->link_layer_registers->source_sas_address_high); + sas_address->low = readl(&iphy->link_layer_registers->source_sas_address_low); } -void scic_sds_phy_get_attached_sas_address(struct scic_sds_phy *sci_phy, +void scic_sds_phy_get_attached_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas_address) { struct sas_identify_frame *iaf; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); iaf = &iphy->frame_rcvd.iaf; memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); } -void scic_sds_phy_get_protocols(struct scic_sds_phy *sci_phy, +void scic_sds_phy_get_protocols(struct isci_phy *iphy, struct scic_phy_proto *protocols) { protocols->all = - (u16)(readl(&sci_phy-> + (u16)(readl(&iphy-> link_layer_registers->transmit_identification) & 0x0000FFFF); } -enum sci_status scic_sds_phy_start(struct scic_sds_phy *sci_phy) +enum sci_status scic_sds_phy_start(struct isci_phy *iphy) { - enum scic_sds_phy_states state = sci_phy->sm.current_state_id; + enum scic_sds_phy_states state = iphy->sm.current_state_id; if (state != SCI_PHY_STOPPED) { - dev_dbg(sciphy_to_dev(sci_phy), + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); return SCI_SUCCESS; } -enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) +enum sci_status scic_sds_phy_stop(struct isci_phy *iphy) { - enum scic_sds_phy_states state = sci_phy->sm.current_state_id; + enum scic_sds_phy_states state = iphy->sm.current_state_id; switch (state) { case SCI_PHY_SUB_INITIAL: @@ -459,43 +458,43 @@ enum sci_status scic_sds_phy_stop(struct scic_sds_phy *sci_phy) case SCI_PHY_READY: break; default: - dev_dbg(sciphy_to_dev(sci_phy), + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - sci_change_state(&sci_phy->sm, SCI_PHY_STOPPED); + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); return SCI_SUCCESS; } -enum sci_status scic_sds_phy_reset(struct scic_sds_phy *sci_phy) +enum sci_status scic_sds_phy_reset(struct isci_phy *iphy) { - enum scic_sds_phy_states state = sci_phy->sm.current_state_id; + enum scic_sds_phy_states state = iphy->sm.current_state_id; if (state != SCI_PHY_READY) { - dev_dbg(sciphy_to_dev(sci_phy), + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - sci_change_state(&sci_phy->sm, SCI_PHY_RESETTING); + sci_change_state(&iphy->sm, SCI_PHY_RESETTING); return SCI_SUCCESS; } -enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy) +enum sci_status scic_sds_phy_consume_power_handler(struct isci_phy *iphy) { - enum scic_sds_phy_states state = sci_phy->sm.current_state_id; + enum scic_sds_phy_states state = iphy->sm.current_state_id; switch (state) { case SCI_PHY_SUB_AWAIT_SAS_POWER: { u32 enable_spinup; - enable_spinup = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); + enable_spinup = readl(&iphy->link_layer_registers->notify_enable_spinup_control); enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); - writel(enable_spinup, &sci_phy->link_layer_registers->notify_enable_spinup_control); + writel(enable_spinup, &iphy->link_layer_registers->notify_enable_spinup_control); /* Change state to the final state this substate machine has run to completion */ - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_FINAL); + sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL); return SCI_SUCCESS; } @@ -504,26 +503,26 @@ enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy) /* Release the spinup hold state and reset the OOB state machine */ scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); + readl(&iphy->link_layer_registers->phy_configuration); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); /* Now restart the OOB operation */ scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); /* Change state to the final state this substate machine has run to completion */ - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SATA_PHY_EN); + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_PHY_EN); return SCI_SUCCESS; } default: - dev_dbg(sciphy_to_dev(sci_phy), + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } @@ -545,19 +544,19 @@ enum sci_status scic_sds_phy_consume_power_handler(struct scic_sds_phy *sci_phy) * none */ static void scic_sds_phy_start_sas_link_training( - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { u32 phy_control; phy_control = - readl(&sci_phy->link_layer_registers->phy_configuration); + readl(&iphy->link_layer_registers->phy_configuration); phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); writel(phy_control, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN); + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN); - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; } /** @@ -569,11 +568,11 @@ static void scic_sds_phy_start_sas_link_training( * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none */ static void scic_sds_phy_start_sata_link_training( - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER); + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER); - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; } /** @@ -588,33 +587,33 @@ static void scic_sds_phy_start_sata_link_training( * */ static void scic_sds_phy_complete_link_training( - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, enum sas_linkrate max_link_rate, u32 next_state) { - sci_phy->max_negotiated_speed = max_link_rate; + iphy->max_negotiated_speed = max_link_rate; - sci_change_state(&sci_phy->sm, next_state); + sci_change_state(&iphy->sm, next_state); } -enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, +enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, u32 event_code) { - enum scic_sds_phy_states state = sci_phy->sm.current_state_id; + enum scic_sds_phy_states state = iphy->sm.current_state_id; switch (state) { case SCI_PHY_SUB_AWAIT_OSSP_EN: switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: - scic_sds_phy_start_sas_link_training(sci_phy); - sci_phy->is_in_link_training = true; + scic_sds_phy_start_sas_link_training(iphy); + iphy->is_in_link_training = true; break; case SCU_EVENT_SATA_SPINUP_HOLD: - scic_sds_phy_start_sata_link_training(sci_phy); - sci_phy->is_in_link_training = true; + scic_sds_phy_start_sata_link_training(iphy); + iphy->is_in_link_training = true; break; default: - dev_dbg(sciphy_to_dev(sci_phy), + dev_dbg(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -632,21 +631,21 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, case SCU_EVENT_SAS_15: case SCU_EVENT_SAS_15_SSC: scic_sds_phy_complete_link_training( - sci_phy, + iphy, SAS_LINK_RATE_1_5_GBPS, SCI_PHY_SUB_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_30: case SCU_EVENT_SAS_30_SSC: scic_sds_phy_complete_link_training( - sci_phy, + iphy, SAS_LINK_RATE_3_0_GBPS, SCI_PHY_SUB_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_60: case SCU_EVENT_SAS_60_SSC: scic_sds_phy_complete_link_training( - sci_phy, + iphy, SAS_LINK_RATE_6_0_GBPS, SCI_PHY_SUB_AWAIT_IAF_UF); break; @@ -654,14 +653,14 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, /* * We were doing SAS PHY link training and received a SATA PHY event * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(sci_phy); + scic_sds_phy_start_sata_link_training(iphy); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); @@ -674,23 +673,23 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: /* Backup the state machine */ - scic_sds_phy_start_sas_link_training(sci_phy); + scic_sds_phy_start_sas_link_training(iphy); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* We were doing SAS PHY link training and received a * SATA PHY event continue OOB/SN as if this were a * SATA PHY */ - scic_sds_phy_start_sata_link_training(sci_phy); + scic_sds_phy_start_sata_link_training(iphy); break; case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: case SCU_EVENT_LINK_FAILURE: case SCU_EVENT_HARD_RESET_RECEIVED: /* Start the oob/sn state machine over again */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); @@ -701,10 +700,10 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received unexpected " "event_code %x\n", __func__, @@ -716,7 +715,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* These events are received every 10ms and are @@ -728,11 +727,11 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, /* There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); + scic_sds_phy_start_sas_link_training(iphy); break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); @@ -744,7 +743,7 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* These events might be received since we dont know how many may be in @@ -752,19 +751,19 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, */ break; case SCU_EVENT_SATA_PHY_DETECTED: - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; /* We have received the SATA PHY notification change state */ - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); break; case SCU_EVENT_SAS_PHY_DETECTED: /* There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); + scic_sds_phy_start_sas_link_training(iphy); break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -783,36 +782,36 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, case SCU_EVENT_SATA_15: case SCU_EVENT_SATA_15_SSC: scic_sds_phy_complete_link_training( - sci_phy, + iphy, SAS_LINK_RATE_1_5_GBPS, SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_30: case SCU_EVENT_SATA_30_SSC: scic_sds_phy_complete_link_training( - sci_phy, + iphy, SAS_LINK_RATE_3_0_GBPS, SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_60: case SCU_EVENT_SATA_60_SSC: scic_sds_phy_complete_link_training( - sci_phy, + iphy, SAS_LINK_RATE_6_0_GBPS, SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; case SCU_EVENT_SAS_PHY_DETECTED: /* * There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(sci_phy); + scic_sds_phy_start_sas_link_training(iphy); break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, event_code); @@ -825,16 +824,16 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, switch (scu_get_event_code(event_code)) { case SCU_EVENT_SATA_PHY_DETECTED: /* Backup the state machine */ - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected event_code %x\n", __func__, @@ -847,20 +846,20 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, switch (scu_get_event_code(event_code)) { case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; case SCU_EVENT_BROADCAST_CHANGE: /* Broadcast change received. Notify the port. */ - if (phy_get_non_dummy_port(sci_phy) != NULL) - scic_sds_port_broadcast_change_received(sci_phy->owning_port, sci_phy); + if (phy_get_non_dummy_port(iphy) != NULL) + scic_sds_port_broadcast_change_received(iphy->owning_port, iphy); else - sci_phy->bcn_received_while_port_unassigned = true; + iphy->bcn_received_while_port_unassigned = true; break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%sP SCIC PHY 0x%p ready state machine received " "unexpected event_code %x\n", - __func__, sci_phy, event_code); + __func__, iphy, event_code); return SCI_FAILURE_INVALID_STATE; } return SCI_SUCCESS; @@ -868,30 +867,30 @@ enum sci_status scic_sds_phy_event_handler(struct scic_sds_phy *sci_phy, switch (scu_get_event_code(event_code)) { case SCU_EVENT_HARD_RESET_TRANSMITTED: /* Link failure change state back to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: SCIC PHY 0x%p resetting state machine received " "unexpected event_code %x\n", - __func__, sci_phy, event_code); + __func__, iphy, event_code); return SCI_FAILURE_INVALID_STATE; break; } return SCI_SUCCESS; default: - dev_dbg(sciphy_to_dev(sci_phy), + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } } -enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, +enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, u32 frame_index) { - enum scic_sds_phy_states state = sci_phy->sm.current_state_id; - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + enum scic_sds_phy_states state = iphy->sm.current_state_id; + struct scic_sds_controller *scic = iphy->owning_port->owning_controller; enum sci_status result; unsigned long flags; @@ -899,7 +898,6 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, case SCI_PHY_SUB_AWAIT_IAF_UF: { u32 *frame_words; struct sas_identify_frame iaf; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); result = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, frame_index, @@ -927,10 +925,10 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, */ state = SCI_PHY_SUB_AWAIT_SAS_POWER; } - sci_change_state(&sci_phy->sm, state); + sci_change_state(&iphy->sm, state); result = SCI_SUCCESS; } else - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected frame id %x\n", __func__, frame_index); @@ -941,10 +939,9 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: { struct dev_to_host_fis *frame_header; u32 *fis_frame_data; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(sci_phy)->uf_control), + &(scic_sds_phy_get_controller(iphy)->uf_control), frame_index, (void **)&frame_header); @@ -964,11 +961,11 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); /* got IAF we can now go to the await spinup semaphore state */ - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_FINAL); + sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL); result = SCI_SUCCESS; } else - dev_warn(sciphy_to_dev(sci_phy), + dev_warn(sciphy_to_dev(iphy), "%s: PHY starting substate machine received " "unexpected frame id %x\n", __func__, frame_index); @@ -979,7 +976,7 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, return result; } default: - dev_dbg(sciphy_to_dev(sci_phy), + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } @@ -988,77 +985,77 @@ enum sci_status scic_sds_phy_frame_handler(struct scic_sds_phy *sci_phy, static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); /* This is just an temporary state go off to the starting state */ - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN); + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN); } static void scic_sds_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct scic_sds_controller *scic = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_insert(scic, sci_phy); + scic_sds_controller_power_control_queue_insert(scic, iphy); } static void scic_sds_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct scic_sds_controller *scic = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_remove(scic, sci_phy); + scic_sds_controller_power_control_queue_remove(scic, iphy); } static void scic_sds_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct scic_sds_controller *scic = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_insert(scic, sci_phy); + scic_sds_controller_power_control_queue_insert(scic, iphy); } static void scic_sds_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct scic_sds_controller *scic = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_remove(scic, sci_phy); + scic_sds_controller_power_control_queue_remove(scic, iphy); } static void scic_sds_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - sci_mod_timer(&sci_phy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); + sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } static void scic_sds_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - sci_del_timer(&sci_phy->sata_timer); + sci_del_timer(&iphy->sata_timer); } static void scic_sds_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - sci_mod_timer(&sci_phy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); + sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } static void scic_sds_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - sci_del_timer(&sci_phy->sata_timer); + sci_del_timer(&iphy->sata_timer); } static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - if (scic_sds_port_link_detected(sci_phy->owning_port, sci_phy)) { + if (scic_sds_port_link_detected(iphy->owning_port, iphy)) { /* * Clear the PE suspend condition so we can actually @@ -1066,79 +1063,79 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_bas * The hardware will not respond to the XRDY until the PE * suspend condition is cleared. */ - scic_sds_phy_resume(sci_phy); + scic_sds_phy_resume(iphy); - sci_mod_timer(&sci_phy->sata_timer, + sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SIGNATURE_FIS_TIMEOUT); } else - sci_phy->is_in_link_training = false; + iphy->is_in_link_training = false; } static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - sci_del_timer(&sci_phy->sata_timer); + sci_del_timer(&iphy->sata_timer); } static void scic_sds_phy_starting_final_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); /* State machine has run to completion so exit out and change * the base state machine to the ready state */ - sci_change_state(&sci_phy->sm, SCI_PHY_READY); + sci_change_state(&iphy->sm, SCI_PHY_READY); } /** * - * @sci_phy: This is the struct scic_sds_phy object to stop. + * @sci_phy: This is the struct isci_phy object to stop. * - * This method will stop the struct scic_sds_phy object. This does not reset the + * This method will stop the struct isci_phy object. This does not reset the * protocol engine it just suspends it and places it in a state where it will * not cause the end device to power up. none */ static void scu_link_layer_stop_protocol_engine( - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { u32 scu_sas_pcfg_value; u32 enable_spinup_value; /* Suspend the protocol engine and place it in a sata spinup hold state */ scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); + readl(&iphy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); /* Disable the notify enable spinup primitives */ - enable_spinup_value = readl(&sci_phy->link_layer_registers->notify_enable_spinup_control); + enable_spinup_value = readl(&iphy->link_layer_registers->notify_enable_spinup_control); enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); - writel(enable_spinup_value, &sci_phy->link_layer_registers->notify_enable_spinup_control); + writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control); } /** * * - * This method will start the OOB/SN state machine for this struct scic_sds_phy object. + * This method will start the OOB/SN state machine for this struct isci_phy object. */ static void scu_link_layer_start_oob( - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { u32 scu_sas_pcfg_value; scu_sas_pcfg_value = - readl(&sci_phy->link_layer_registers->phy_configuration); + readl(&iphy->link_layer_registers->phy_configuration); scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); scu_sas_pcfg_value &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); writel(scu_sas_pcfg_value, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); } /** @@ -1150,7 +1147,7 @@ static void scu_link_layer_start_oob( * hard reset bit set. */ static void scu_link_layer_tx_hard_reset( - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { u32 phy_configuration_value; @@ -1158,91 +1155,91 @@ static void scu_link_layer_tx_hard_reset( * SAS Phys must wait for the HARD_RESET_TX event notification to transition * to the starting state. */ phy_configuration_value = - readl(&sci_phy->link_layer_registers->phy_configuration); + readl(&iphy->link_layer_registers->phy_configuration); phy_configuration_value |= (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); writel(phy_configuration_value, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); /* Now take the OOB state machine out of reset */ phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); writel(phy_configuration_value, - &sci_phy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); } static void scic_sds_phy_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); /* * @todo We need to get to the controller to place this PE in a * reset state */ - sci_del_timer(&sci_phy->sata_timer); + sci_del_timer(&iphy->sata_timer); - scu_link_layer_stop_protocol_engine(sci_phy); + scu_link_layer_stop_protocol_engine(iphy); - if (sci_phy->sm.previous_state_id != SCI_PHY_INITIAL) - scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), - phy_get_non_dummy_port(sci_phy), - sci_phy); + if (iphy->sm.previous_state_id != SCI_PHY_INITIAL) + scic_sds_controller_link_down(scic_sds_phy_get_controller(iphy), + phy_get_non_dummy_port(iphy), + iphy); } static void scic_sds_phy_starting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - scu_link_layer_stop_protocol_engine(sci_phy); - scu_link_layer_start_oob(sci_phy); + scu_link_layer_stop_protocol_engine(iphy); + scu_link_layer_start_oob(iphy); /* We don't know what kind of phy we are going to be just yet */ - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; - sci_phy->bcn_received_while_port_unassigned = false; + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + iphy->bcn_received_while_port_unassigned = false; - if (sci_phy->sm.previous_state_id == SCI_PHY_READY) - scic_sds_controller_link_down(scic_sds_phy_get_controller(sci_phy), - phy_get_non_dummy_port(sci_phy), - sci_phy); + if (iphy->sm.previous_state_id == SCI_PHY_READY) + scic_sds_controller_link_down(scic_sds_phy_get_controller(iphy), + phy_get_non_dummy_port(iphy), + iphy); - sci_change_state(&sci_phy->sm, SCI_PHY_SUB_INITIAL); + sci_change_state(&iphy->sm, SCI_PHY_SUB_INITIAL); } static void scic_sds_phy_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - scic_sds_controller_link_up(scic_sds_phy_get_controller(sci_phy), - phy_get_non_dummy_port(sci_phy), - sci_phy); + scic_sds_controller_link_up(scic_sds_phy_get_controller(iphy), + phy_get_non_dummy_port(iphy), + iphy); } static void scic_sds_phy_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - scic_sds_phy_suspend(sci_phy); + scic_sds_phy_suspend(iphy); } static void scic_sds_phy_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_phy *sci_phy = container_of(sm, typeof(*sci_phy), sm); + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); /* The phy is being reset, therefore deactivate it from the port. In * the resetting state we don't notify the user regarding link up and * link down notifications */ - scic_sds_port_deactivate_phy(sci_phy->owning_port, sci_phy, false); + scic_sds_port_deactivate_phy(iphy->owning_port, iphy, false); - if (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - scu_link_layer_tx_hard_reset(sci_phy); + if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + scu_link_layer_tx_hard_reset(iphy); } else { /* The SCU does not need to have a discrete reset state so * just go back to the starting state. */ - sci_change_state(&sci_phy->sm, SCI_PHY_STARTING); + sci_change_state(&iphy->sm, SCI_PHY_STARTING); } } @@ -1293,21 +1290,21 @@ static const struct sci_base_state scic_sds_phy_state_table[] = { [SCI_PHY_FINAL] = { }, }; -void scic_sds_phy_construct(struct scic_sds_phy *sci_phy, +void scic_sds_phy_construct(struct isci_phy *iphy, struct scic_sds_port *owning_port, u8 phy_index) { - sci_init_sm(&sci_phy->sm, scic_sds_phy_state_table, SCI_PHY_INITIAL); + sci_init_sm(&iphy->sm, scic_sds_phy_state_table, SCI_PHY_INITIAL); /* Copy the rest of the input data to our locals */ - sci_phy->owning_port = owning_port; - sci_phy->phy_index = phy_index; - sci_phy->bcn_received_while_port_unassigned = false; - sci_phy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; - sci_phy->link_layer_registers = NULL; - sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + iphy->owning_port = owning_port; + iphy->phy_index = phy_index; + iphy->bcn_received_while_port_unassigned = false; + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + iphy->link_layer_registers = NULL; + iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; /* Create the SIGNATURE FIS Timeout timer for this phy */ - sci_init_timer(&sci_phy->sata_timer, phy_sata_timeout); + sci_init_timer(&iphy->sata_timer, phy_sata_timeout); } void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) @@ -1368,14 +1365,14 @@ int isci_phy_control(struct asd_sas_phy *sas_phy, switch (func) { case PHY_FUNC_DISABLE: spin_lock_irqsave(&ihost->scic_lock, flags); - scic_sds_phy_stop(&iphy->sci); + scic_sds_phy_stop(iphy); spin_unlock_irqrestore(&ihost->scic_lock, flags); break; case PHY_FUNC_LINK_RESET: spin_lock_irqsave(&ihost->scic_lock, flags); - scic_sds_phy_stop(&iphy->sci); - scic_sds_phy_start(&iphy->sci); + scic_sds_phy_stop(iphy); + scic_sds_phy_start(iphy); spin_unlock_irqrestore(&ihost->scic_lock, flags); break; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 97ebee1..345fbeac 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -84,102 +84,40 @@ enum scic_sds_phy_protocol { }; /** - * struct scic_sds_phy - This structure contains or references all of the data - * necessary to represent the core phy object and SCU harware protocol - * engine. - * - * + * isci_phy - hba local phy infrastructure + * @sm: + * @protocol: attached device protocol + * @phy_index: physical index relative to the controller (0-3) + * @bcn_received_while_port_unassigned: bcn to report after port association + * @sata_timer: timeout SATA signature FIS arrival */ -struct scic_sds_phy { - /** - * This field contains the information for the base phy state machine. - */ +struct isci_phy { struct sci_base_state_machine sm; - - /** - * This field specifies the port object that owns/contains this phy. - */ struct scic_sds_port *owning_port; - - /** - * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s, - * or 6.0 Gb/s operation. - */ enum sas_linkrate max_negotiated_speed; - - /** - * This member specifies the protocol being utilized on this phy. This - * field contains a legitamite value once the PHY has link trained with - * a remote phy. - */ enum scic_sds_phy_protocol protocol; - - /** - * This field specifies the index with which this phy is associated (0-3). - */ u8 phy_index; - - /** - * This member indicates if this particular PHY has received a BCN while - * it had no port assignement. This BCN will be reported once the phy is - * assigned to a port. - */ bool bcn_received_while_port_unassigned; - - /** - * This field indicates if this PHY is currently in the process of - * link training (i.e. it has started OOB, but has yet to perform - * IAF exchange/Signature FIS reception). - */ bool is_in_link_training; - - /** - * Timer to detect when a signature FIS timeout has occurred. The - * signature FIS is the first FIS sent by an attached SATA device - * after OOB/SN. - */ - struct sci_timer sata_timer; - - /** - * This field is the pointer to the transport layer register for the SCU - * hardware. - */ + struct sci_timer sata_timer; struct scu_transport_layer_registers __iomem *transport_layer_registers; - - /** - * This field points to the link layer register set within the SCU. - */ struct scu_link_layer_registers __iomem *link_layer_registers; - -}; - - -struct isci_phy { - struct scic_sds_phy sci; struct asd_sas_phy sas_phy; struct isci_port *isci_port; u8 sas_addr[SAS_ADDR_SIZE]; - union { struct sas_identify_frame iaf; struct dev_to_host_fis fis; } frame_rcvd; }; -static inline struct isci_phy *to_isci_phy(struct asd_sas_phy *sas_phy) +static inline struct isci_phy *to_iphy(struct asd_sas_phy *sas_phy) { struct isci_phy *iphy = container_of(sas_phy, typeof(*iphy), sas_phy); return iphy; } -static inline struct isci_phy *sci_phy_to_iphy(struct scic_sds_phy *sci_phy) -{ - struct isci_phy *iphy = container_of(sci_phy, typeof(*iphy), sci); - - return iphy; -} - struct scic_phy_cap { union { struct { @@ -520,61 +458,61 @@ enum scic_sds_phy_states { (scic_sds_port_get_controller((phy)->owning_port)) void scic_sds_phy_construct( - struct scic_sds_phy *this_phy, + struct isci_phy *iphy, struct scic_sds_port *owning_port, u8 phy_index); -struct scic_sds_port *phy_get_non_dummy_port(struct scic_sds_phy *sci_phy); +struct scic_sds_port *phy_get_non_dummy_port(struct isci_phy *iphy); void scic_sds_phy_set_port( - struct scic_sds_phy *this_phy, + struct isci_phy *iphy, struct scic_sds_port *owning_port); enum sci_status scic_sds_phy_initialize( - struct scic_sds_phy *this_phy, + struct isci_phy *iphy, struct scu_transport_layer_registers __iomem *transport_layer_registers, struct scu_link_layer_registers __iomem *link_layer_registers); enum sci_status scic_sds_phy_start( - struct scic_sds_phy *this_phy); + struct isci_phy *iphy); enum sci_status scic_sds_phy_stop( - struct scic_sds_phy *this_phy); + struct isci_phy *iphy); enum sci_status scic_sds_phy_reset( - struct scic_sds_phy *this_phy); + struct isci_phy *iphy); void scic_sds_phy_resume( - struct scic_sds_phy *this_phy); + struct isci_phy *iphy); void scic_sds_phy_setup_transport( - struct scic_sds_phy *this_phy, + struct isci_phy *iphy, u32 device_id); enum sci_status scic_sds_phy_event_handler( - struct scic_sds_phy *this_phy, + struct isci_phy *iphy, u32 event_code); enum sci_status scic_sds_phy_frame_handler( - struct scic_sds_phy *this_phy, + struct isci_phy *iphy, u32 frame_index); enum sci_status scic_sds_phy_consume_power_handler( - struct scic_sds_phy *this_phy); + struct isci_phy *iphy); void scic_sds_phy_get_sas_address( - struct scic_sds_phy *this_phy, + struct isci_phy *iphy, struct sci_sas_address *sas_address); void scic_sds_phy_get_attached_sas_address( - struct scic_sds_phy *this_phy, + struct isci_phy *iphy, struct sci_sas_address *sas_address); struct scic_phy_proto; void scic_sds_phy_get_protocols( - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, struct scic_phy_proto *protocols); -enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy); +enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy); struct isci_host; void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index); diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index bd09154..d53c0b1 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -154,17 +154,17 @@ static enum sci_status scic_port_get_properties(struct scic_sds_port *port, static void scic_port_bcn_enable(struct scic_sds_port *sci_port) { - struct scic_sds_phy *sci_phy; + struct isci_phy *iphy; u32 val; int i; for (i = 0; i < ARRAY_SIZE(sci_port->phy_table); i++) { - sci_phy = sci_port->phy_table[i]; - if (!sci_phy) + iphy = sci_port->phy_table[i]; + if (!iphy) continue; - val = readl(&sci_phy->link_layer_registers->link_layer_control); + val = readl(&iphy->link_layer_registers->link_layer_control); /* clear the bit by writing 1. */ - writel(val, &sci_phy->link_layer_registers->link_layer_control); + writel(val, &iphy->link_layer_registers->link_layer_control); } } @@ -180,10 +180,9 @@ void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) return; for (i = 0; i < ARRAY_SIZE(iport->sci.phy_table); i++) { - struct scic_sds_phy *sci_phy = iport->sci.phy_table[i]; - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); + struct isci_phy *iphy = iport->sci.phy_table[i]; - if (!sci_phy) + if (!iphy) continue; ihost->sas_ha.notify_port_event(&iphy->sas_phy, @@ -194,9 +193,8 @@ void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) void isci_port_bc_change_received(struct isci_host *ihost, struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); struct isci_port *iport = iphy->isci_port; if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) { @@ -219,33 +217,32 @@ void isci_port_bc_change_received(struct isci_host *ihost, static void isci_port_link_up(struct isci_host *isci_host, struct scic_sds_port *port, - struct scic_sds_phy *phy) + struct isci_phy *iphy) { unsigned long flags; struct scic_port_properties properties; - struct isci_phy *isci_phy = sci_phy_to_iphy(phy); struct isci_port *isci_port = sci_port_to_iport(port); unsigned long success = true; - BUG_ON(isci_phy->isci_port != NULL); + BUG_ON(iphy->isci_port != NULL); - isci_phy->isci_port = isci_port; + iphy->isci_port = isci_port; dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p\n", __func__, isci_port); - spin_lock_irqsave(&isci_phy->sas_phy.frame_rcvd_lock, flags); + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); - isci_port_change_state(isci_phy->isci_port, isci_starting); + isci_port_change_state(iphy->isci_port, isci_starting); scic_port_get_properties(port, &properties); - if (phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { + if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { u64 attached_sas_address; - isci_phy->sas_phy.oob_mode = SATA_OOB_MODE; - isci_phy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis); + iphy->sas_phy.oob_mode = SATA_OOB_MODE; + iphy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis); /* * For direct-attached SATA devices, the SCI core will @@ -259,28 +256,28 @@ static void isci_port_link_up(struct isci_host *isci_host, attached_sas_address |= properties.remote.sas_address.low; swab64s(&attached_sas_address); - memcpy(&isci_phy->sas_phy.attached_sas_addr, + memcpy(&iphy->sas_phy.attached_sas_addr, &attached_sas_address, sizeof(attached_sas_address)); - } else if (phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { - isci_phy->sas_phy.oob_mode = SAS_OOB_MODE; - isci_phy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame); + } else if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + iphy->sas_phy.oob_mode = SAS_OOB_MODE; + iphy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame); /* Copy the attached SAS address from the IAF */ - memcpy(isci_phy->sas_phy.attached_sas_addr, - isci_phy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE); + memcpy(iphy->sas_phy.attached_sas_addr, + iphy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE); } else { dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__); success = false; } - isci_phy->sas_phy.phy->negotiated_linkrate = sci_phy_linkrate(phy); + iphy->sas_phy.phy->negotiated_linkrate = sci_phy_linkrate(iphy); - spin_unlock_irqrestore(&isci_phy->sas_phy.frame_rcvd_lock, flags); + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); /* Notify libsas that we have an address frame, if indeed * we've found an SSP, SMP, or STP target */ if (success) - isci_host->sas_ha.notify_port_event(&isci_phy->sas_phy, + isci_host->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BYTES_DMAED); } @@ -495,11 +492,7 @@ static bool scic_sds_port_is_phy_mask_valid( return false; } -/** - * - * @sci_port: This parameter specifies the port from which to return a - * connected phy. - * +/* * This method retrieves a currently active (i.e. connected) phy contained in * the port. Currently, the lowest order phy that is connected is returned. * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is @@ -507,58 +500,38 @@ static bool scic_sds_port_is_phy_mask_valid( * point) phys contained in the port. All other values specify a struct scic_sds_phy * object that is active in the port. */ -static struct scic_sds_phy *scic_sds_port_get_a_connected_phy( - struct scic_sds_port *sci_port - ) { +static struct isci_phy *scic_sds_port_get_a_connected_phy(struct scic_sds_port *sci_port) +{ u32 index; - struct scic_sds_phy *phy; + struct isci_phy *iphy; for (index = 0; index < SCI_MAX_PHYS; index++) { - /* - * Ensure that the phy is both part of the port and currently - * connected to the remote end-point. */ - phy = sci_port->phy_table[index]; - if ( - (phy != NULL) - && scic_sds_port_active_phy(sci_port, phy) - ) { - return phy; - } + /* Ensure that the phy is both part of the port and currently + * connected to the remote end-point. + */ + iphy = sci_port->phy_table[index]; + if (iphy && scic_sds_port_active_phy(sci_port, iphy)) + return iphy; } return NULL; } -/** - * scic_sds_port_set_phy() - - * @out]: port The port object to which the phy assignement is being made. - * @out]: phy The phy which is being assigned to the port. - * - * This method attempts to make the assignment of the phy to the port. If - * successful the phy is assigned to the ports phy table. bool true if the phy - * assignment can be made. false if the phy assignement can not be made. This - * is a functional test that only fails if the phy is currently assigned to a - * different port. - */ -static enum sci_status scic_sds_port_set_phy( - struct scic_sds_port *port, - struct scic_sds_phy *phy) +static enum sci_status scic_sds_port_set_phy(struct scic_sds_port *port, struct isci_phy *iphy) { - /* - * Check to see if we can add this phy to a port + /* Check to see if we can add this phy to a port * that means that the phy is not part of a port and that the port does - * not already have a phy assinged to the phy index. */ - if ( - (port->phy_table[phy->phy_index] == NULL) - && (phy_get_non_dummy_port(phy) == NULL) - && scic_sds_port_is_valid_phy_assignment(port, phy->phy_index) - ) { - /* - * Phy is being added in the stopped state so we are in MPC mode - * make logical port index = physical port index */ + * not already have a phy assinged to the phy index. + */ + if (!port->phy_table[iphy->phy_index] && + !phy_get_non_dummy_port(iphy) && + scic_sds_port_is_valid_phy_assignment(port, iphy->phy_index)) { + /* Phy is being added in the stopped state so we are in MPC mode + * make logical port index = physical port index + */ port->logical_port_index = port->physical_port_index; - port->phy_table[phy->phy_index] = phy; - scic_sds_phy_set_port(phy, port); + port->phy_table[iphy->phy_index] = iphy; + scic_sds_phy_set_port(iphy, port); return SCI_SUCCESS; } @@ -566,28 +539,18 @@ static enum sci_status scic_sds_port_set_phy( return SCI_FAILURE; } -/** - * scic_sds_port_clear_phy() - - * @out]: port The port from which the phy is being cleared. - * @out]: phy The phy being cleared from the port. - * - * This method will clear the phy assigned to this port. This method fails if - * this phy is not currently assinged to this port. bool true if the phy is - * removed from the port. false if this phy is not assined to this port. - */ -static enum sci_status scic_sds_port_clear_phy( - struct scic_sds_port *port, - struct scic_sds_phy *phy) +static enum sci_status scic_sds_port_clear_phy(struct scic_sds_port *port, + struct isci_phy *iphy) { /* Make sure that this phy is part of this port */ - if (port->phy_table[phy->phy_index] == phy && - phy_get_non_dummy_port(phy) == port) { + if (port->phy_table[iphy->phy_index] == iphy && + phy_get_non_dummy_port(iphy) == port) { struct scic_sds_controller *scic = port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); /* Yep it is assigned to this port so remove it */ - scic_sds_phy_set_port(phy, &ihost->ports[SCI_MAX_PORTS].sci); - port->phy_table[phy->phy_index] = NULL; + scic_sds_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS].sci); + port->phy_table[iphy->phy_index] = NULL; return SCI_SUCCESS; } @@ -634,20 +597,20 @@ void scic_sds_port_get_attached_sas_address( struct scic_sds_port *sci_port, struct sci_sas_address *sas_address) { - struct scic_sds_phy *sci_phy; + struct isci_phy *iphy; /* * Ensure that the phy is both part of the port and currently * connected to the remote end-point. */ - sci_phy = scic_sds_port_get_a_connected_phy(sci_port); - if (sci_phy) { - if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { - scic_sds_phy_get_attached_sas_address(sci_phy, + iphy = scic_sds_port_get_a_connected_phy(sci_port); + if (iphy) { + if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { + scic_sds_phy_get_attached_sas_address(iphy, sas_address); } else { - scic_sds_phy_get_sas_address(sci_phy, sas_address); - sas_address->low += sci_phy->phy_index; + scic_sds_phy_get_sas_address(iphy, sas_address); + sas_address->low += iphy->phy_index; } } else { sas_address->high = 0; @@ -787,39 +750,38 @@ void scic_sds_port_setup_transports( * notifying the user that the link is up. none */ static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, bool do_notify_user) { struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) - scic_sds_phy_resume(sci_phy); + if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) + scic_sds_phy_resume(iphy); - sci_port->active_phy_mask |= 1 << sci_phy->phy_index; + sci_port->active_phy_mask |= 1 << iphy->phy_index; - scic_sds_controller_clear_invalid_phy(scic, sci_phy); + scic_sds_controller_clear_invalid_phy(scic, iphy); if (do_notify_user == true) - isci_port_link_up(ihost, sci_port, sci_phy); + isci_port_link_up(ihost, sci_port, iphy); } void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, bool do_notify_user) { struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); struct isci_port *iport = sci_port_to_iport(sci_port); struct isci_host *ihost = scic_to_ihost(scic); - struct isci_phy *iphy = sci_phy_to_iphy(sci_phy); - sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index); + sci_port->active_phy_mask &= ~(1 << iphy->phy_index); - sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; /* Re-assign the phy back to the LP as if it were a narrow port */ - writel(sci_phy->phy_index, - &sci_port->port_pe_configuration_register[sci_phy->phy_index]); + writel(iphy->phy_index, + &sci_port->port_pe_configuration_register[iphy->phy_index]); if (do_notify_user == true) isci_port_link_down(ihost, iphy, iport); @@ -834,7 +796,7 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, * this port object. None */ static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { struct scic_sds_controller *scic = sci_port->owning_controller; @@ -843,8 +805,8 @@ static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port, * not go ahead and tell the SCI_USER that we have discovered an * invalid link. */ - if ((scic->invalid_phy_mask & (1 << sci_phy->phy_index)) == 0) { - scic_sds_controller_set_invalid_phy(scic, sci_phy); + if ((scic->invalid_phy_mask & (1 << iphy->phy_index)) == 0) { + scic_sds_controller_set_invalid_phy(scic, iphy); dev_warn(&scic_to_ihost(scic)->pdev->dev, "Invalid link up!\n"); } } @@ -879,7 +841,7 @@ static void port_state_machine_change(struct scic_sds_port *sci_port, /** * scic_sds_port_general_link_up_handler - phy can be assigned to port? * @sci_port: scic_sds_port object for which has a phy that has gone link up. - * @sci_phy: This is the struct scic_sds_phy object that has gone link up. + * @sci_phy: This is the struct isci_phy object that has gone link up. * @do_notify_user: This parameter specifies whether to inform the user (via * scic_cb_port_link_up()) as to the fact that a new phy as become ready. * @@ -890,14 +852,14 @@ static void port_state_machine_change(struct scic_sds_port *sci_port, * the same port. none */ static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, bool do_notify_user) { struct sci_sas_address port_sas_address; struct sci_sas_address phy_sas_address; scic_sds_port_get_attached_sas_address(sci_port, &port_sas_address); - scic_sds_phy_get_attached_sas_address(sci_phy, &phy_sas_address); + scic_sds_phy_get_attached_sas_address(iphy, &phy_sas_address); /* If the SAS address of the new phy matches the SAS address of * other phys in the port OR this is the first phy in the port, @@ -909,11 +871,11 @@ static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port sci_port->active_phy_mask == 0) { struct sci_base_state_machine *sm = &sci_port->sm; - scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user); + scic_sds_port_activate_phy(sci_port, iphy, do_notify_user); if (sm->current_state_id == SCI_PORT_RESETTING) port_state_machine_change(sci_port, SCI_PORT_READY); } else - scic_sds_port_invalid_link_up(sci_port, sci_phy); + scic_sds_port_invalid_link_up(sci_port, iphy); } @@ -957,12 +919,12 @@ static bool scic_sds_port_is_wide(struct scic_sds_port *sci_port) */ bool scic_sds_port_link_detected( struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { if ((sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) && - (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && + (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && scic_sds_port_is_wide(sci_port)) { - scic_sds_port_invalid_link_up(sci_port, sci_phy); + scic_sds_port_invalid_link_up(sci_port, iphy); return false; } @@ -1045,47 +1007,26 @@ static void scic_sds_port_update_viit_entry(struct scic_sds_port *sci_port) &sci_port->viit_registers->status); } -/** - * This method returns the maximum allowed speed for data transfers on this - * port. This maximum allowed speed evaluates to the maximum speed of the - * slowest phy in the port. - * @sci_port: This parameter specifies the port for which to retrieve the - * maximum allowed speed. - * - * This method returns the maximum negotiated speed of the slowest phy in the - * port. - */ -enum sas_linkrate scic_sds_port_get_max_allowed_speed( - struct scic_sds_port *sci_port) +enum sas_linkrate scic_sds_port_get_max_allowed_speed(struct scic_sds_port *sci_port) { u16 index; + struct isci_phy *iphy; enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS; - struct scic_sds_phy *phy = NULL; /* * Loop through all of the phys in this port and find the phy with the * lowest maximum link rate. */ for (index = 0; index < SCI_MAX_PHYS; index++) { - phy = sci_port->phy_table[index]; - if ( - (phy != NULL) - && (scic_sds_port_active_phy(sci_port, phy) == true) - && (phy->max_negotiated_speed < max_allowed_speed) - ) - max_allowed_speed = phy->max_negotiated_speed; + iphy = sci_port->phy_table[index]; + if (iphy && scic_sds_port_active_phy(sci_port, iphy) && + iphy->max_negotiated_speed < max_allowed_speed) + max_allowed_speed = iphy->max_negotiated_speed; } return max_allowed_speed; } -/** - * - * @sci_port: This is the struct scic_sds_port object to suspend. - * - * This method will susped the port task scheduler for this port object. none - */ -static void -scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port) +static void scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port) { u32 pts_control_value; @@ -1377,7 +1318,7 @@ enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port) static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 timeout) { enum sci_status status = SCI_FAILURE_INVALID_PHY; - struct scic_sds_phy *selected_phy = NULL; + struct isci_phy *iphy = NULL; enum scic_sds_port_states state; u32 phy_index; @@ -1389,22 +1330,21 @@ static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 } /* Select a phy on which we can send the hard reset request. */ - for (phy_index = 0; phy_index < SCI_MAX_PHYS && !selected_phy; phy_index++) { - selected_phy = sci_port->phy_table[phy_index]; - if (selected_phy && - !scic_sds_port_active_phy(sci_port, selected_phy)) { + for (phy_index = 0; phy_index < SCI_MAX_PHYS && !iphy; phy_index++) { + iphy = sci_port->phy_table[phy_index]; + if (iphy && !scic_sds_port_active_phy(sci_port, iphy)) { /* * We found a phy but it is not ready select * different phy */ - selected_phy = NULL; + iphy = NULL; } } /* If we have a phy then go ahead and start the reset procedure */ - if (!selected_phy) + if (!iphy) return status; - status = scic_sds_phy_reset(selected_phy); + status = scic_sds_phy_reset(iphy); if (status != SCI_SUCCESS) return status; @@ -1412,8 +1352,7 @@ static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 sci_mod_timer(&sci_port->timer, timeout); sci_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; - port_state_machine_change(sci_port, - SCI_PORT_RESETTING); + port_state_machine_change(sci_port, SCI_PORT_RESETTING); return SCI_SUCCESS; } @@ -1427,7 +1366,7 @@ static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 * status is a failure to add the phy to the port. */ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { enum sci_status status; enum scic_sds_port_states state; @@ -1446,32 +1385,32 @@ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, /* Make sure that the PHY SAS Address matches the SAS Address * for this port */ - scic_sds_phy_get_sas_address(sci_phy, &phy_sas_address); + scic_sds_phy_get_sas_address(iphy, &phy_sas_address); if (port_sas_address.high != phy_sas_address.high || port_sas_address.low != phy_sas_address.low) return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; } - return scic_sds_port_set_phy(sci_port, sci_phy); + return scic_sds_port_set_phy(sci_port, iphy); } case SCI_PORT_SUB_WAITING: case SCI_PORT_SUB_OPERATIONAL: - status = scic_sds_port_set_phy(sci_port, sci_phy); + status = scic_sds_port_set_phy(sci_port, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); + scic_sds_port_general_link_up_handler(sci_port, iphy, true); sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; port_state_machine_change(sci_port, SCI_PORT_SUB_CONFIGURING); return status; case SCI_PORT_SUB_CONFIGURING: - status = scic_sds_port_set_phy(sci_port, sci_phy); + status = scic_sds_port_set_phy(sci_port, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); + scic_sds_port_general_link_up_handler(sci_port, iphy, true); /* Re-enter the configuring state since this may be the last phy in * the port. @@ -1496,7 +1435,7 @@ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, * other status is a failure to add the phy to the port. */ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { enum sci_status status; enum scic_sds_port_states state; @@ -1505,23 +1444,23 @@ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, switch (state) { case SCI_PORT_STOPPED: - return scic_sds_port_clear_phy(sci_port, sci_phy); + return scic_sds_port_clear_phy(sci_port, iphy); case SCI_PORT_SUB_OPERATIONAL: - status = scic_sds_port_clear_phy(sci_port, sci_phy); + status = scic_sds_port_clear_phy(sci_port, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_deactivate_phy(sci_port, sci_phy, true); + scic_sds_port_deactivate_phy(sci_port, iphy, true); sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; port_state_machine_change(sci_port, SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; case SCI_PORT_SUB_CONFIGURING: - status = scic_sds_port_clear_phy(sci_port, sci_phy); + status = scic_sds_port_clear_phy(sci_port, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_deactivate_phy(sci_port, sci_phy, true); + scic_sds_port_deactivate_phy(sci_port, iphy, true); /* Re-enter the configuring state since this may be the last phy in * the port @@ -1537,7 +1476,7 @@ enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, } enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { enum scic_sds_port_states state; @@ -1547,13 +1486,13 @@ enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, /* Since this is the first phy going link up for the port we * can just enable it and continue */ - scic_sds_port_activate_phy(sci_port, sci_phy, true); + scic_sds_port_activate_phy(sci_port, iphy, true); port_state_machine_change(sci_port, SCI_PORT_SUB_OPERATIONAL); return SCI_SUCCESS; case SCI_PORT_SUB_OPERATIONAL: - scic_sds_port_general_link_up_handler(sci_port, sci_phy, true); + scic_sds_port_general_link_up_handler(sci_port, iphy, true); return SCI_SUCCESS; case SCI_PORT_RESETTING: /* TODO We should make sure that the phy that has gone @@ -1570,7 +1509,7 @@ enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_general_link_up_handler(sci_port, sci_phy, false); + scic_sds_port_general_link_up_handler(sci_port, iphy, false); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(sci_port), @@ -1580,14 +1519,14 @@ enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, } enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { enum scic_sds_port_states state; state = sci_port->sm.current_state_id; switch (state) { case SCI_PORT_SUB_OPERATIONAL: - scic_sds_port_deactivate_phy(sci_port, sci_phy, true); + scic_sds_port_deactivate_phy(sci_port, iphy, true); /* If there are no active phys left in the port, then * transition the port to the WAITING state until such time @@ -1600,7 +1539,7 @@ enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, case SCI_PORT_RESETTING: /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_deactivate_phy(sci_port, sci_phy, false); + scic_sds_port_deactivate_phy(sci_port, iphy, false); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(sci_port), @@ -1879,13 +1818,13 @@ enum isci_status isci_port_get_state( void scic_sds_port_broadcast_change_received( struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { struct scic_sds_controller *scic = sci_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); /* notify the user. */ - isci_port_bc_change_received(ihost, sci_port, sci_phy); + isci_port_bc_change_received(ihost, sci_port, iphy); } int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 668f3a1..b6ce56a 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -131,7 +131,7 @@ struct scic_sds_port { /** * This field is the table of phys assigned to the port. */ - struct scic_sds_phy *phy_table[SCI_MAX_PHYS]; + struct isci_phy *phy_table[SCI_MAX_PHYS]; /** * This field is a pointer back to the controller that owns this @@ -328,11 +328,11 @@ enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port); enum sci_status scic_sds_port_add_phy( struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); enum sci_status scic_sds_port_remove_phy( struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); void scic_sds_port_setup_transports( struct scic_sds_port *sci_port, @@ -342,17 +342,17 @@ void isci_port_bcn_enable(struct isci_host *, struct isci_port *); void scic_sds_port_deactivate_phy( struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy, + struct isci_phy *iphy, bool do_notify_user); bool scic_sds_port_link_detected( struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); struct isci_request; struct scic_sds_remote_device; @@ -371,7 +371,7 @@ enum sas_linkrate scic_sds_port_get_max_allowed_speed( void scic_sds_port_broadcast_change_received( struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy); + struct isci_phy *iphy); bool scic_sds_port_is_valid_phy_assignment( struct scic_sds_port *sci_port, diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index fcb8f03..8444fd8 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -114,7 +114,7 @@ static s32 sci_sas_address_compare( */ static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( struct scic_sds_controller *scic, - struct scic_sds_phy *phy) + struct isci_phy *iphy) { u8 i; struct sci_sas_address port_sas_address; @@ -127,8 +127,8 @@ static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( * more phys match the sent and received SAS address as this phy in which * case it should participate in the same port. */ - scic_sds_phy_get_sas_address(phy, &phy_sas_address); - scic_sds_phy_get_attached_sas_address(phy, &phy_attached_device_address); + scic_sds_phy_get_sas_address(iphy, &phy_sas_address); + scic_sds_phy_get_attached_sas_address(iphy, &phy_attached_device_address); for (i = 0; i < scic->logical_port_entries; i++) { struct isci_host *ihost = scic_to_ihost(scic); @@ -196,8 +196,8 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * PE0 and PE3 can never have the same SAS Address unless they * are part of the same x4 wide port and we have already checked * for this condition. */ - scic_sds_phy_get_sas_address(&ihost->phys[0].sci, &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[3].sci, &second_address); + scic_sds_phy_get_sas_address(&ihost->phys[0], &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[3], &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -209,8 +209,8 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * part of the same port. */ if (port_agent->phy_valid_port_range[0].min_index == 0 && port_agent->phy_valid_port_range[1].min_index == 1) { - scic_sds_phy_get_sas_address(&ihost->phys[0].sci, &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[2].sci, &second_address); + scic_sds_phy_get_sas_address(&ihost->phys[0], &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[2], &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -223,8 +223,8 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * part of the same port. */ if (port_agent->phy_valid_port_range[2].min_index == 2 && port_agent->phy_valid_port_range[3].min_index == 3) { - scic_sds_phy_get_sas_address(&ihost->phys[1].sci, &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[3].sci, &second_address); + scic_sds_phy_get_sas_address(&ihost->phys[1], &first_address); + scic_sds_phy_get_sas_address(&ihost->phys[3], &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -277,7 +277,7 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { if ((phy_mask & (1 << phy_index)) == 0) continue; - scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + scic_sds_phy_get_sas_address(&ihost->phys[phy_index], &sas_address); /* @@ -302,7 +302,7 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( while (phy_index < SCI_MAX_PHYS) { if ((phy_mask & (1 << phy_index)) == 0) continue; - scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + scic_sds_phy_get_sas_address(&ihost->phys[phy_index], &phy_assigned_address); if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { @@ -316,7 +316,7 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( port_agent->phy_valid_port_range[phy_index].max_index = phy_index; scic_sds_port_add_phy(&ihost->ports[port_index].sci, - &ihost->phys[phy_index].sci); + &ihost->phys[phy_index]); assigned_phy_mask |= (1 << phy_index); } @@ -352,12 +352,12 @@ static void mpc_agent_timeout(unsigned long data) configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; for (index = 0; index < SCI_MAX_PHYS; index++) { - struct scic_sds_phy *sci_phy = &ihost->phys[index].sci; + struct isci_phy *iphy = &ihost->phys[index]; if (configure_phy_mask & (1 << index)) { port_agent->link_up_handler(scic, port_agent, - phy_get_non_dummy_port(sci_phy), - sci_phy); + phy_get_non_dummy_port(iphy), + iphy); } } @@ -365,37 +365,22 @@ done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } -/** - * - * @controller: This is the controller object that receives the link up - * notification. - * @port: This is the port object associated with the phy. If the is no - * associated port this is an NULL. - * @phy: This is the phy object which has gone ready. - * - * This method handles the manual port configuration link up notifications. - * Since all ports and phys are associate at initialization time we just turn - * around and notifiy the port object that there is a link up. If this PHY is - * not associated with a port there is no action taken. Is it possible to get a - * link up notification from a phy that has no assocoated port? - */ -static void scic_sds_mpc_agent_link_up( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *port, - struct scic_sds_phy *phy) +static void scic_sds_mpc_agent_link_up(struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct scic_sds_port *port, + struct isci_phy *iphy) { - /* - * If the port has an invalid handle then the phy was not assigned to + /* If the port has an invalid handle then the phy was not assigned to * a port. This is because the phy was not given the same SAS Address - * as the other PHYs in the port. */ + * as the other PHYs in the port. + */ if (port != NULL) { - port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(phy)); + port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(iphy)); - scic_sds_port_link_up(port, phy); + scic_sds_port_link_up(port, iphy); - if ((port->active_phy_mask & (1 << scic_sds_phy_get_index(phy))) != 0) { - port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(phy)); + if ((port->active_phy_mask & (1 << scic_sds_phy_get_index(iphy))) != 0) { + port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(iphy)); } } } @@ -421,7 +406,7 @@ static void scic_sds_mpc_agent_link_down( struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent, struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { if (sci_port != NULL) { /* @@ -432,9 +417,9 @@ static void scic_sds_mpc_agent_link_down( * state. */ port_agent->phy_ready_mask &= - ~(1 << scic_sds_phy_get_index(sci_phy)); + ~(1 << scic_sds_phy_get_index(iphy)); port_agent->phy_configured_mask &= - ~(1 << scic_sds_phy_get_index(sci_phy)); + ~(1 << scic_sds_phy_get_index(iphy)); /* * Check to see if there are more phys waiting to be @@ -451,7 +436,7 @@ static void scic_sds_mpc_agent_link_down( SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); } - scic_sds_port_link_down(sci_port, sci_phy); + scic_sds_port_link_down(sci_port, iphy); } } @@ -482,11 +467,11 @@ static enum sci_status scic_sds_apc_agent_validate_phy_configuration( port_index = phy_index; /* Get the assigned SAS Address for the first PHY on the controller. */ - scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + scic_sds_phy_get_sas_address(&ihost->phys[phy_index], &sas_address); while (++phy_index < SCI_MAX_PHYS) { - scic_sds_phy_get_sas_address(&ihost->phys[phy_index].sci, + scic_sds_phy_get_sas_address(&ihost->phys[phy_index], &phy_assigned_address); /* Verify each of the SAS address are all the same for every PHY */ @@ -504,20 +489,10 @@ static enum sci_status scic_sds_apc_agent_validate_phy_configuration( return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); } -/** - * - * @controller: This is the controller object that receives the link up - * notification. - * @phy: This is the phy object which has gone link up. - * - * This method handles the automatic port configuration for link up - * notifications. - */ -static void scic_sds_apc_agent_configure_ports( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_phy *phy, - bool start_timer) +static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *controller, + struct scic_sds_port_configuration_agent *port_agent, + struct isci_phy *iphy, + bool start_timer) { u8 port_index; enum sci_status status; @@ -525,10 +500,10 @@ static void scic_sds_apc_agent_configure_ports( enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; struct isci_host *ihost = scic_to_ihost(controller); - port = scic_sds_port_configuration_agent_find_port(controller, phy); + port = scic_sds_port_configuration_agent_find_port(controller, iphy); if (port != NULL) { - if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) + if (scic_sds_port_is_valid_phy_assignment(port, iphy->phy_index)) apc_activity = SCIC_SDS_APC_ADD_PHY; else apc_activity = SCIC_SDS_APC_SKIP_PHY; @@ -540,20 +515,20 @@ static void scic_sds_apc_agent_configure_ports( * * Note the break when we reach the condition of the port id == phy id */ for ( - port_index = port_agent->phy_valid_port_range[phy->phy_index].min_index; - port_index <= port_agent->phy_valid_port_range[phy->phy_index].max_index; + port_index = port_agent->phy_valid_port_range[iphy->phy_index].min_index; + port_index <= port_agent->phy_valid_port_range[iphy->phy_index].max_index; port_index++ ) { port = &ihost->ports[port_index].sci; /* First we must make sure that this PHY can be added to this Port. */ - if (scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)) { + if (scic_sds_port_is_valid_phy_assignment(port, iphy->phy_index)) { /* * Port contains a PHY with a greater PHY ID than the current * PHY that has gone link up. This phy can not be part of any * port so skip it and move on. */ - if (port->active_phy_mask > (1 << phy->phy_index)) { + if (port->active_phy_mask > (1 << iphy->phy_index)) { apc_activity = SCIC_SDS_APC_SKIP_PHY; break; } @@ -562,7 +537,7 @@ static void scic_sds_apc_agent_configure_ports( * We have reached the end of our Port list and have not found * any reason why we should not either add the PHY to the port * or wait for more phys to become active. */ - if (port->physical_port_index == phy->phy_index) { + if (port->physical_port_index == iphy->phy_index) { /* * The Port either has no active PHYs. * Consider that if the port had any active PHYs we would have @@ -608,10 +583,10 @@ static void scic_sds_apc_agent_configure_ports( switch (apc_activity) { case SCIC_SDS_APC_ADD_PHY: - status = scic_sds_port_add_phy(port, phy); + status = scic_sds_port_add_phy(port, iphy); if (status == SCI_SUCCESS) { - port_agent->phy_configured_mask |= (1 << phy->phy_index); + port_agent->phy_configured_mask |= (1 << iphy->phy_index); } break; @@ -651,14 +626,14 @@ static void scic_sds_apc_agent_configure_ports( static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent, struct scic_sds_port *sci_port, - struct scic_sds_phy *sci_phy) + struct isci_phy *iphy) { - u8 phy_index = sci_phy->phy_index; + u8 phy_index = iphy->phy_index; if (!sci_port) { /* the phy is not the part of this port */ port_agent->phy_ready_mask |= 1 << phy_index; - scic_sds_apc_agent_configure_ports(scic, port_agent, sci_phy, true); + scic_sds_apc_agent_configure_ports(scic, port_agent, iphy, true); } else { /* the phy is already the part of the port */ u32 port_state = sci_port->sm.current_state_id; @@ -669,7 +644,7 @@ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, */ BUG_ON(port_state != SCI_PORT_RESETTING); port_agent->phy_ready_mask |= 1 << phy_index; - scic_sds_port_link_up(sci_port, sci_phy); + scic_sds_port_link_up(sci_port, iphy); } } @@ -690,18 +665,18 @@ static void scic_sds_apc_agent_link_down( struct scic_sds_controller *controller, struct scic_sds_port_configuration_agent *port_agent, struct scic_sds_port *port, - struct scic_sds_phy *phy) + struct isci_phy *iphy) { - port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(phy)); + port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(iphy)); if (port != NULL) { - if (port_agent->phy_configured_mask & (1 << phy->phy_index)) { + if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) { enum sci_status status; - status = scic_sds_port_remove_phy(port, phy); + status = scic_sds_port_remove_phy(port, iphy); if (status == SCI_SUCCESS) { - port_agent->phy_configured_mask &= ~(1 << phy->phy_index); + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); } } } @@ -739,7 +714,7 @@ static void apc_agent_timeout(unsigned long data) continue; scic_sds_apc_agent_configure_ports(scic, port_agent, - &ihost->phys[index].sci, false); + &ihost->phys[index], false); } done: diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index c7cb0c5..a81a864 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1389,7 +1389,7 @@ int isci_remote_device_found(struct domain_device *domain_dev) sas_port = domain_dev->port; sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy, port_phy_el); - isci_phy = to_isci_phy(sas_phy); + isci_phy = to_iphy(sas_phy); isci_port = isci_phy->isci_port; /* we are being called for a device on this port, -- cgit v0.10.2 From 76802ce6756d605fbd7a9a43c196e9a471b3e57c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 29 Jun 2011 09:45:48 -0700 Subject: isci: fix scic_sds_remote_device_terminate_requests Commit 0815632 "isci: unify remote_device stop_handlers" introduced the possibility that not all requests get terminated if we reach the request_count. Now that we properly reference count devices we don't need this self-defense and can do the straightforward scan of all active requests. Reported-by: Jeff Skirvin Acked-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index a81a864..71ab908 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -137,10 +137,10 @@ static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds { struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - u32 i, request_count = sci_dev->started_request_count; enum sci_status status = SCI_SUCCESS; + u32 i; - for (i = 0; i < SCI_MAX_IO_REQUESTS && i < request_count; i++) { + for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) { struct isci_request *ireq = ihost->reqs[i]; enum sci_status s; -- cgit v0.10.2 From ffe191c92ff195d73f9130b1490045ca2dd4c5e0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 29 Jun 2011 13:09:25 -0700 Subject: isci: unify isci_port and scic_sds_port Remove the distinction between these two implementations and unify on isci_port (local instances named iport). The duplicate '->owning_port' and '->isci_port' in both isci_phy and isci_remote_device will be fixed in a later patch... this is just the straightforward rename/unification. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index c5c2733..4e11f9e 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1054,9 +1054,9 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, /* Start all of the ports on this controller */ for (index = 0; index < scic->logical_port_entries; index++) { - struct scic_sds_port *sci_port = &ihost->ports[index].sci; + struct isci_port *iport = &ihost->ports[index]; - result = scic_sds_port_start(sci_port); + result = scic_sds_port_start(iport); if (result) return result; } @@ -1306,8 +1306,8 @@ void isci_host_deinit(struct isci_host *ihost) /* Cancel any/all outstanding port timers */ for (i = 0; i < ihost->sci.logical_port_entries; i++) { - struct scic_sds_port *sci_port = &ihost->ports[i].sci; - del_timer_sync(&sci_port->timer.timer); + struct isci_port *iport = &ihost->ports[i]; + del_timer_sync(&iport->timer.timer); } /* Cancel any/all outstanding phy timers */ @@ -1552,9 +1552,9 @@ static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller struct isci_host *ihost = scic_to_ihost(scic); for (index = 0; index < scic->logical_port_entries; index++) { - struct scic_sds_port *sci_port = &ihost->ports[index].sci; + struct isci_port *iport = &ihost->ports[index]; - port_status = scic_sds_port_stop(sci_port); + port_status = scic_sds_port_stop(iport); if ((port_status != SCI_SUCCESS) && (port_status != SCI_FAILURE_INVALID_STATE)) { @@ -1564,7 +1564,7 @@ static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller "%s: Controller stop operation failed to " "stop port %d because of status %d.\n", __func__, - sci_port->logical_port_index, + iport->logical_port_index, port_status); } } @@ -1780,14 +1780,14 @@ static enum sci_status scic_controller_construct(struct scic_sds_controller *sci /* Construct the ports for this controller */ for (i = 0; i < SCI_MAX_PORTS; i++) - scic_sds_port_construct(&ihost->ports[i].sci, i, scic); - scic_sds_port_construct(&ihost->ports[i].sci, SCIC_SDS_DUMMY_PORT, scic); + scic_sds_port_construct(&ihost->ports[i], i, scic); + scic_sds_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, scic); /* Construct the phys for this controller */ for (i = 0; i < SCI_MAX_PHYS; i++) { /* Add all the PHYs to the dummy port */ scic_sds_phy_construct(&ihost->phys[i], - &ihost->ports[SCI_MAX_PORTS].sci, i); + &ihost->ports[SCI_MAX_PORTS], i); } scic->invalid_phy_mask = 0; @@ -2233,7 +2233,7 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc } for (i = 0; i < scic->logical_port_entries; i++) { - result = scic_sds_port_initialize(&ihost->ports[i].sci, + result = scic_sds_port_initialize(&ihost->ports[i], &scic->scu_registers->peg0.ptsg.port[i], &scic->scu_registers->peg0.ptsg.protocol_engine, &scic->scu_registers->peg0.viit[i]); @@ -2484,19 +2484,19 @@ int isci_host_init(struct isci_host *isci_host) } void scic_sds_controller_link_up(struct scic_sds_controller *scic, - struct scic_sds_port *port, struct isci_phy *iphy) + struct isci_port *iport, struct isci_phy *iphy) { switch (scic->sm.current_state_id) { case SCIC_STARTING: sci_del_timer(&scic->phy_timer); scic->phy_startup_timer_pending = false; scic->port_agent.link_up_handler(scic, &scic->port_agent, - port, iphy); + iport, iphy); scic_sds_controller_start_next_phy(scic); break; case SCIC_READY: scic->port_agent.link_up_handler(scic, &scic->port_agent, - port, iphy); + iport, iphy); break; default: dev_dbg(scic_to_dev(scic), @@ -2507,13 +2507,13 @@ void scic_sds_controller_link_up(struct scic_sds_controller *scic, } void scic_sds_controller_link_down(struct scic_sds_controller *scic, - struct scic_sds_port *port, struct isci_phy *iphy) + struct isci_port *iport, struct isci_phy *iphy) { switch (scic->sm.current_state_id) { case SCIC_STARTING: case SCIC_READY: scic->port_agent.link_down_handler(scic, &scic->port_agent, - port, iphy); + iport, iphy); break; default: dev_dbg(scic_to_dev(scic), diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 1edd135..fb8048e 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -108,7 +108,7 @@ struct scic_power_control { struct scic_sds_port_configuration_agent; typedef void (*port_config_fn)(struct scic_sds_controller *, struct scic_sds_port_configuration_agent *, - struct scic_sds_port *, struct isci_phy *); + struct isci_port *, struct isci_phy *); struct scic_sds_port_configuration_agent { u16 phy_configured_mask; @@ -532,9 +532,8 @@ static inline struct device *sciphy_to_dev(struct isci_phy *iphy) return &iphy->isci_port->isci_host->pdev->dev; } -static inline struct device *sciport_to_dev(struct scic_sds_port *sci_port) +static inline struct device *sciport_to_dev(struct isci_port *iport) { - struct isci_port *iport = sci_port_to_iport(sci_port); if (!iport || !iport->isci_host) return NULL; @@ -613,12 +612,12 @@ void scic_sds_controller_power_control_queue_remove( void scic_sds_controller_link_up( struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy); void scic_sds_controller_link_down( struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy); void scic_sds_controller_remote_device_stopped( @@ -649,7 +648,7 @@ void isci_host_deinit( void isci_host_port_link_up( struct isci_host *, - struct scic_sds_port *, + struct isci_port *, struct isci_phy *); int isci_host_dev_found(struct domain_device *); diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 0e60fb7..fd0e973 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -286,7 +286,7 @@ done: * port (i.e. it's contained in the dummy port). !NULL All other * values indicate a handle/pointer to the port containing the phy. */ -struct scic_sds_port *phy_get_non_dummy_port( +struct isci_port *phy_get_non_dummy_port( struct isci_phy *iphy) { if (scic_sds_port_get_index(iphy->owning_port) == SCIC_SDS_DUMMY_PORT) @@ -304,9 +304,9 @@ struct scic_sds_port *phy_get_non_dummy_port( */ void scic_sds_phy_set_port( struct isci_phy *iphy, - struct scic_sds_port *sci_port) + struct isci_port *iport) { - iphy->owning_port = sci_port; + iphy->owning_port = iport; if (iphy->bcn_received_while_port_unassigned) { iphy->bcn_received_while_port_unassigned = false; @@ -1291,12 +1291,12 @@ static const struct sci_base_state scic_sds_phy_state_table[] = { }; void scic_sds_phy_construct(struct isci_phy *iphy, - struct scic_sds_port *owning_port, u8 phy_index) + struct isci_port *iport, u8 phy_index) { sci_init_sm(&iphy->sm, scic_sds_phy_state_table, SCI_PHY_INITIAL); /* Copy the rest of the input data to our locals */ - iphy->owning_port = owning_port; + iphy->owning_port = iport; iphy->phy_index = phy_index; iphy->bcn_received_while_port_unassigned = false; iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 345fbeac..19aa444 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -93,7 +93,7 @@ enum scic_sds_phy_protocol { */ struct isci_phy { struct sci_base_state_machine sm; - struct scic_sds_port *owning_port; + struct isci_port *owning_port; enum sas_linkrate max_negotiated_speed; enum scic_sds_phy_protocol protocol; u8 phy_index; @@ -178,7 +178,7 @@ struct scic_phy_properties { * supplied phy. This field may be set to NULL * if the phy is not currently contained in a port. */ - struct scic_sds_port *owning_port; + struct isci_port *iport; /** * This field specifies the link rate at which the phy is @@ -459,14 +459,14 @@ enum scic_sds_phy_states { void scic_sds_phy_construct( struct isci_phy *iphy, - struct scic_sds_port *owning_port, + struct isci_port *iport, u8 phy_index); -struct scic_sds_port *phy_get_non_dummy_port(struct isci_phy *iphy); +struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy); void scic_sds_phy_set_port( struct isci_phy *iphy, - struct scic_sds_port *owning_port); + struct isci_port *iport); enum sci_status scic_sds_phy_initialize( struct isci_phy *iphy, diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index d53c0b1..0459188 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -83,7 +83,7 @@ static void isci_port_change_state(struct isci_port *iport, enum isci_status sta * transmit_identification register. */ static void -scic_sds_port_get_protocols(struct scic_sds_port *sci_port, +scic_sds_port_get_protocols(struct isci_port *iport, struct scic_phy_proto *protocols) { u8 index; @@ -91,8 +91,8 @@ scic_sds_port_get_protocols(struct scic_sds_port *sci_port, protocols->all = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) { - scic_sds_phy_get_protocols(sci_port->phy_table[index], + if (iport->phy_table[index] != NULL) { + scic_sds_phy_get_protocols(iport->phy_table[index], protocols); } } @@ -107,7 +107,7 @@ scic_sds_port_get_protocols(struct scic_sds_port *sci_port, * Return a bit mask indicating which phys are a part of this port. Each bit * corresponds to a phy identifier (e.g. bit 0 = phy id 0). */ -static u32 scic_sds_port_get_phys(struct scic_sds_port *sci_port) +static u32 scic_sds_port_get_phys(struct isci_port *iport) { u32 index; u32 mask; @@ -115,7 +115,7 @@ static u32 scic_sds_port_get_phys(struct scic_sds_port *sci_port) mask = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) { + if (iport->phy_table[index] != NULL) { mask |= (1 << index); } } @@ -136,30 +136,29 @@ static u32 scic_sds_port_get_phys(struct scic_sds_port *sci_port) * value is returned if the specified port is not valid. When this value is * returned, no data is copied to the properties output parameter. */ -static enum sci_status scic_port_get_properties(struct scic_sds_port *port, +static enum sci_status scic_port_get_properties(struct isci_port *iport, struct scic_port_properties *prop) { - if ((port == NULL) || - (port->logical_port_index == SCIC_SDS_DUMMY_PORT)) + if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT) return SCI_FAILURE_INVALID_PORT; - prop->index = port->logical_port_index; - prop->phy_mask = scic_sds_port_get_phys(port); - scic_sds_port_get_sas_address(port, &prop->local.sas_address); - scic_sds_port_get_protocols(port, &prop->local.protocols); - scic_sds_port_get_attached_sas_address(port, &prop->remote.sas_address); + prop->index = iport->logical_port_index; + prop->phy_mask = scic_sds_port_get_phys(iport); + scic_sds_port_get_sas_address(iport, &prop->local.sas_address); + scic_sds_port_get_protocols(iport, &prop->local.protocols); + scic_sds_port_get_attached_sas_address(iport, &prop->remote.sas_address); return SCI_SUCCESS; } -static void scic_port_bcn_enable(struct scic_sds_port *sci_port) +static void scic_port_bcn_enable(struct isci_port *iport) { struct isci_phy *iphy; u32 val; int i; - for (i = 0; i < ARRAY_SIZE(sci_port->phy_table); i++) { - iphy = sci_port->phy_table[i]; + for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) { + iphy = iport->phy_table[i]; if (!iphy) continue; val = readl(&iphy->link_layer_registers->link_layer_control); @@ -179,8 +178,8 @@ void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags)) return; - for (i = 0; i < ARRAY_SIZE(iport->sci.phy_table); i++) { - struct isci_phy *iphy = iport->sci.phy_table[i]; + for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) { + struct isci_phy *iphy = iport->phy_table[i]; if (!iphy) continue; @@ -191,12 +190,10 @@ void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) } } -void isci_port_bc_change_received(struct isci_host *ihost, - struct scic_sds_port *sci_port, - struct isci_phy *iphy) +static void isci_port_bc_change_received(struct isci_host *ihost, + struct isci_port *iport, + struct isci_phy *iphy) { - struct isci_port *iport = iphy->isci_port; - if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) { dev_dbg(&ihost->pdev->dev, "%s: disabled BCN; isci_phy = %p, sas_phy = %p\n", @@ -212,31 +209,30 @@ void isci_port_bc_change_received(struct isci_host *ihost, ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD); } - scic_port_bcn_enable(sci_port); + scic_port_bcn_enable(iport); } static void isci_port_link_up(struct isci_host *isci_host, - struct scic_sds_port *port, + struct isci_port *iport, struct isci_phy *iphy) { unsigned long flags; struct scic_port_properties properties; - struct isci_port *isci_port = sci_port_to_iport(port); unsigned long success = true; BUG_ON(iphy->isci_port != NULL); - iphy->isci_port = isci_port; + iphy->isci_port = iport; dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p\n", - __func__, isci_port); + __func__, iport); spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); isci_port_change_state(iphy->isci_port, isci_starting); - scic_port_get_properties(port, &properties); + scic_port_get_properties(iport, &properties); if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { u64 attached_sas_address; @@ -370,7 +366,7 @@ static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *i } static void isci_port_stop_complete(struct scic_sds_controller *scic, - struct scic_sds_port *sci_port, + struct isci_port *iport, enum sci_status completion_status) { dev_dbg(&scic_to_ihost(scic)->pdev->dev, "Port stop complete\n"); @@ -408,30 +404,30 @@ static void isci_port_hard_reset_complete(struct isci_port *isci_port, * assignment for the port false if this is not a valid phy assignment for the * port */ -bool scic_sds_port_is_valid_phy_assignment(struct scic_sds_port *sci_port, +bool scic_sds_port_is_valid_phy_assignment(struct isci_port *iport, u32 phy_index) { /* Initialize to invalid value. */ u32 existing_phy_index = SCI_MAX_PHYS; u32 index; - if ((sci_port->physical_port_index == 1) && (phy_index != 1)) { + if ((iport->physical_port_index == 1) && (phy_index != 1)) { return false; } - if (sci_port->physical_port_index == 3 && phy_index != 3) { + if (iport->physical_port_index == 3 && phy_index != 3) { return false; } if ( - (sci_port->physical_port_index == 2) + (iport->physical_port_index == 2) && ((phy_index == 0) || (phy_index == 1)) ) { return false; } for (index = 0; index < SCI_MAX_PHYS; index++) { - if ((sci_port->phy_table[index] != NULL) + if ((iport->phy_table[index] != NULL) && (index != phy_index)) { existing_phy_index = index; } @@ -442,9 +438,9 @@ bool scic_sds_port_is_valid_phy_assignment(struct scic_sds_port *sci_port, * operating at the same maximum link rate. */ if ( (existing_phy_index < SCI_MAX_PHYS) - && (sci_port->owning_controller->user_parameters.sds1.phys[ + && (iport->owning_controller->user_parameters.sds1.phys[ phy_index].max_speed_generation != - sci_port->owning_controller->user_parameters.sds1.phys[ + iport->owning_controller->user_parameters.sds1.phys[ existing_phy_index].max_speed_generation) ) return false; @@ -465,25 +461,25 @@ bool scic_sds_port_is_valid_phy_assignment(struct scic_sds_port *sci_port, * port false if this is not a valid phy assignment for the port */ static bool scic_sds_port_is_phy_mask_valid( - struct scic_sds_port *sci_port, + struct isci_port *iport, u32 phy_mask) { - if (sci_port->physical_port_index == 0) { + if (iport->physical_port_index == 0) { if (((phy_mask & 0x0F) == 0x0F) || ((phy_mask & 0x03) == 0x03) || ((phy_mask & 0x01) == 0x01) || (phy_mask == 0)) return true; - } else if (sci_port->physical_port_index == 1) { + } else if (iport->physical_port_index == 1) { if (((phy_mask & 0x02) == 0x02) || (phy_mask == 0)) return true; - } else if (sci_port->physical_port_index == 2) { + } else if (iport->physical_port_index == 2) { if (((phy_mask & 0x0C) == 0x0C) || ((phy_mask & 0x04) == 0x04) || (phy_mask == 0)) return true; - } else if (sci_port->physical_port_index == 3) { + } else if (iport->physical_port_index == 3) { if (((phy_mask & 0x08) == 0x08) || (phy_mask == 0)) return true; @@ -500,7 +496,7 @@ static bool scic_sds_port_is_phy_mask_valid( * point) phys contained in the port. All other values specify a struct scic_sds_phy * object that is active in the port. */ -static struct isci_phy *scic_sds_port_get_a_connected_phy(struct scic_sds_port *sci_port) +static struct isci_phy *scic_sds_port_get_a_connected_phy(struct isci_port *iport) { u32 index; struct isci_phy *iphy; @@ -509,29 +505,29 @@ static struct isci_phy *scic_sds_port_get_a_connected_phy(struct scic_sds_port * /* Ensure that the phy is both part of the port and currently * connected to the remote end-point. */ - iphy = sci_port->phy_table[index]; - if (iphy && scic_sds_port_active_phy(sci_port, iphy)) + iphy = iport->phy_table[index]; + if (iphy && scic_sds_port_active_phy(iport, iphy)) return iphy; } return NULL; } -static enum sci_status scic_sds_port_set_phy(struct scic_sds_port *port, struct isci_phy *iphy) +static enum sci_status scic_sds_port_set_phy(struct isci_port *iport, struct isci_phy *iphy) { /* Check to see if we can add this phy to a port * that means that the phy is not part of a port and that the port does * not already have a phy assinged to the phy index. */ - if (!port->phy_table[iphy->phy_index] && + if (!iport->phy_table[iphy->phy_index] && !phy_get_non_dummy_port(iphy) && - scic_sds_port_is_valid_phy_assignment(port, iphy->phy_index)) { + scic_sds_port_is_valid_phy_assignment(iport, iphy->phy_index)) { /* Phy is being added in the stopped state so we are in MPC mode * make logical port index = physical port index */ - port->logical_port_index = port->physical_port_index; - port->phy_table[iphy->phy_index] = iphy; - scic_sds_phy_set_port(iphy, port); + iport->logical_port_index = iport->physical_port_index; + iport->phy_table[iphy->phy_index] = iphy; + scic_sds_phy_set_port(iphy, iport); return SCI_SUCCESS; } @@ -539,18 +535,18 @@ static enum sci_status scic_sds_port_set_phy(struct scic_sds_port *port, struct return SCI_FAILURE; } -static enum sci_status scic_sds_port_clear_phy(struct scic_sds_port *port, +static enum sci_status scic_sds_port_clear_phy(struct isci_port *iport, struct isci_phy *iphy) { /* Make sure that this phy is part of this port */ - if (port->phy_table[iphy->phy_index] == iphy && - phy_get_non_dummy_port(iphy) == port) { - struct scic_sds_controller *scic = port->owning_controller; + if (iport->phy_table[iphy->phy_index] == iphy && + phy_get_non_dummy_port(iphy) == iport) { + struct scic_sds_controller *scic = iport->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); /* Yep it is assigned to this port so remove it */ - scic_sds_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS].sci); - port->phy_table[iphy->phy_index] = NULL; + scic_sds_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS]); + iport->phy_table[iphy->phy_index] = NULL; return SCI_SUCCESS; } @@ -568,7 +564,7 @@ static enum sci_status scic_sds_port_clear_phy(struct scic_sds_port *port, * */ void scic_sds_port_get_sas_address( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct sci_sas_address *sas_address) { u32 index; @@ -577,8 +573,8 @@ void scic_sds_port_get_sas_address( sas_address->low = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) { - scic_sds_phy_get_sas_address(sci_port->phy_table[index], sas_address); + if (iport->phy_table[index] != NULL) { + scic_sds_phy_get_sas_address(iport->phy_table[index], sas_address); } } } @@ -594,7 +590,7 @@ void scic_sds_port_get_sas_address( * */ void scic_sds_port_get_attached_sas_address( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct sci_sas_address *sas_address) { struct isci_phy *iphy; @@ -603,7 +599,7 @@ void scic_sds_port_get_attached_sas_address( * Ensure that the phy is both part of the port and currently * connected to the remote end-point. */ - iphy = scic_sds_port_get_a_connected_phy(sci_port); + iphy = scic_sds_port_get_a_connected_phy(iport); if (iphy) { if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { scic_sds_phy_get_attached_sas_address(iphy, @@ -628,11 +624,11 @@ void scic_sds_port_get_attached_sas_address( * This structure will be posted to the hardware to work around a scheduler * error in the hardware. */ -static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni) +static void scic_sds_port_construct_dummy_rnc(struct isci_port *iport, u16 rni) { union scu_remote_node_context *rnc; - rnc = &sci_port->owning_controller->remote_node_context_table[rni]; + rnc = &iport->owning_controller->remote_node_context_table[rni]; memset(rnc, 0, sizeof(union scu_remote_node_context)); @@ -641,7 +637,7 @@ static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u1 rnc->ssp.remote_node_index = rni; rnc->ssp.remote_node_port_width = 1; - rnc->ssp.logical_port_index = sci_port->physical_port_index; + rnc->ssp.logical_port_index = iport->physical_port_index; rnc->ssp.nexus_loss_timer_enable = false; rnc->ssp.check_bit = false; @@ -656,9 +652,9 @@ static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u1 * structure will be posted to the hardwre to work around a scheduler error * in the hardware. */ -static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tag) +static void scic_sds_port_construct_dummy_task(struct isci_port *iport, u16 tag) { - struct scic_sds_controller *scic = sci_port->owning_controller; + struct scic_sds_controller *scic = iport->owning_controller; struct scu_task_context *task_context; task_context = &scic->task_context_table[ISCI_TAG_TCI(tag)]; @@ -666,29 +662,29 @@ static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u task_context->initiator_request = 1; task_context->connection_rate = 1; - task_context->logical_port_index = sci_port->physical_port_index; + task_context->logical_port_index = iport->physical_port_index; task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; task_context->task_index = ISCI_TAG_TCI(tag); task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; - task_context->remote_node_index = sci_port->reserved_rni; + task_context->remote_node_index = iport->reserved_rni; task_context->do_not_dma_ssp_good_response = 1; task_context->task_phase = 0x01; } -static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port) +static void scic_sds_port_destroy_dummy_resources(struct isci_port *iport) { - struct scic_sds_controller *scic = sci_port->owning_controller; + struct scic_sds_controller *scic = iport->owning_controller; - if (sci_port->reserved_tag != SCI_CONTROLLER_INVALID_IO_TAG) - isci_free_tag(scic_to_ihost(scic), sci_port->reserved_tag); + if (iport->reserved_tag != SCI_CONTROLLER_INVALID_IO_TAG) + isci_free_tag(scic_to_ihost(scic), iport->reserved_tag); - if (sci_port->reserved_rni != SCU_DUMMY_INDEX) + if (iport->reserved_rni != SCU_DUMMY_INDEX) scic_sds_remote_node_table_release_remote_node_index(&scic->available_remote_nodes, - 1, sci_port->reserved_rni); + 1, iport->reserved_rni); - sci_port->reserved_rni = SCU_DUMMY_INDEX; - sci_port->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; + iport->reserved_rni = SCU_DUMMY_INDEX; + iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; } /** @@ -704,14 +700,14 @@ static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port * if the phy being added to the port */ enum sci_status scic_sds_port_initialize( - struct scic_sds_port *sci_port, + struct isci_port *iport, void __iomem *port_task_scheduler_registers, void __iomem *port_configuration_regsiter, void __iomem *viit_registers) { - sci_port->port_task_scheduler_registers = port_task_scheduler_registers; - sci_port->port_pe_configuration_register = port_configuration_regsiter; - sci_port->viit_registers = viit_registers; + iport->port_task_scheduler_registers = port_task_scheduler_registers; + iport->port_pe_configuration_register = port_configuration_regsiter; + iport->viit_registers = viit_registers; return SCI_SUCCESS; } @@ -720,20 +716,20 @@ enum sci_status scic_sds_port_initialize( /** * This method assigns the direct attached device ID for this port. * - * @param[in] sci_port The port for which the direct attached device id is to + * @param[in] iport The port for which the direct attached device id is to * be assigned. * @param[in] device_id The direct attached device ID to assign to the port. * This will be the RNi for the device */ void scic_sds_port_setup_transports( - struct scic_sds_port *sci_port, + struct isci_port *iport, u32 device_id) { u8 index; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->active_phy_mask & (1 << index)) - scic_sds_phy_setup_transport(sci_port->phy_table[index], device_id); + if (iport->active_phy_mask & (1 << index)) + scic_sds_phy_setup_transport(iport->phy_table[index], device_id); } } @@ -749,39 +745,38 @@ void scic_sds_port_setup_transports( * the phy to the port - enabling the Protocol Engine in the silicon. - * notifying the user that the link is up. none */ -static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port, +static void scic_sds_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user) { - struct scic_sds_controller *scic = sci_port->owning_controller; + struct scic_sds_controller *scic = iport->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) scic_sds_phy_resume(iphy); - sci_port->active_phy_mask |= 1 << iphy->phy_index; + iport->active_phy_mask |= 1 << iphy->phy_index; scic_sds_controller_clear_invalid_phy(scic, iphy); if (do_notify_user == true) - isci_port_link_up(ihost, sci_port, iphy); + isci_port_link_up(ihost, iport, iphy); } -void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, +void scic_sds_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user) { - struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port); - struct isci_port *iport = sci_port_to_iport(sci_port); + struct scic_sds_controller *scic = scic_sds_port_get_controller(iport); struct isci_host *ihost = scic_to_ihost(scic); - sci_port->active_phy_mask &= ~(1 << iphy->phy_index); + iport->active_phy_mask &= ~(1 << iphy->phy_index); iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; /* Re-assign the phy back to the LP as if it were a narrow port */ writel(iphy->phy_index, - &sci_port->port_pe_configuration_register[iphy->phy_index]); + &iport->port_pe_configuration_register[iphy->phy_index]); if (do_notify_user == true) isci_port_link_down(ihost, iphy, iport); @@ -795,10 +790,10 @@ void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port, * This function will disable the phy and report that the phy is not valid for * this port object. None */ -static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port, +static void scic_sds_port_invalid_link_up(struct isci_port *iport, struct isci_phy *iphy) { - struct scic_sds_controller *scic = sci_port->owning_controller; + struct scic_sds_controller *scic = iport->owning_controller; /* * Check to see if we have alreay reported this link as bad and if @@ -825,17 +820,17 @@ static bool is_port_ready_state(enum scic_sds_port_states state) } /* flag dummy rnc hanling when exiting a ready state */ -static void port_state_machine_change(struct scic_sds_port *sci_port, +static void port_state_machine_change(struct isci_port *iport, enum scic_sds_port_states state) { - struct sci_base_state_machine *sm = &sci_port->sm; + struct sci_base_state_machine *sm = &iport->sm; enum scic_sds_port_states old_state = sm->current_state_id; if (is_port_ready_state(old_state) && !is_port_ready_state(state)) - sci_port->ready_exit = true; + iport->ready_exit = true; sci_change_state(sm, state); - sci_port->ready_exit = false; + iport->ready_exit = false; } /** @@ -851,14 +846,14 @@ static void port_state_machine_change(struct scic_sds_port *sci_port, * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in * the same port. none */ -static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port, +static void scic_sds_port_general_link_up_handler(struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user) { struct sci_sas_address port_sas_address; struct sci_sas_address phy_sas_address; - scic_sds_port_get_attached_sas_address(sci_port, &port_sas_address); + scic_sds_port_get_attached_sas_address(iport, &port_sas_address); scic_sds_phy_get_attached_sas_address(iphy, &phy_sas_address); /* If the SAS address of the new phy matches the SAS address of @@ -868,14 +863,14 @@ static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port */ if ((phy_sas_address.high == port_sas_address.high && phy_sas_address.low == port_sas_address.low) || - sci_port->active_phy_mask == 0) { - struct sci_base_state_machine *sm = &sci_port->sm; + iport->active_phy_mask == 0) { + struct sci_base_state_machine *sm = &iport->sm; - scic_sds_port_activate_phy(sci_port, iphy, do_notify_user); + scic_sds_port_activate_phy(iport, iphy, do_notify_user); if (sm->current_state_id == SCI_PORT_RESETTING) - port_state_machine_change(sci_port, SCI_PORT_READY); + port_state_machine_change(iport, SCI_PORT_READY); } else - scic_sds_port_invalid_link_up(sci_port, iphy); + scic_sds_port_invalid_link_up(iport, iphy); } @@ -889,13 +884,13 @@ static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port * bool true Is returned if this is a wide ported port. false Is returned if * this is a narrow port. */ -static bool scic_sds_port_is_wide(struct scic_sds_port *sci_port) +static bool scic_sds_port_is_wide(struct isci_port *iport) { u32 index; u32 phy_count = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index] != NULL) { + if (iport->phy_table[index] != NULL) { phy_count++; } } @@ -918,13 +913,13 @@ static bool scic_sds_port_is_wide(struct scic_sds_port *sci_port) * devices this could become an invalid port configuration. */ bool scic_sds_port_link_detected( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy) { - if ((sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) && + if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) && (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && - scic_sds_port_is_wide(sci_port)) { - scic_sds_port_invalid_link_up(sci_port, iphy); + scic_sds_port_is_wide(iport)) { + scic_sds_port_invalid_link_up(iport, iphy); return false; } @@ -935,8 +930,8 @@ bool scic_sds_port_link_detected( static void port_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; - struct scic_sds_port *sci_port = container_of(tmr, typeof(*sci_port), timer); - struct isci_host *ihost = scic_to_ihost(sci_port->owning_controller); + struct isci_port *iport = container_of(tmr, typeof(*iport), timer); + struct isci_host *ihost = scic_to_ihost(iport->owning_controller); unsigned long flags; u32 current_state; @@ -945,33 +940,33 @@ static void port_timeout(unsigned long data) if (tmr->cancel) goto done; - current_state = sci_port->sm.current_state_id; + current_state = iport->sm.current_state_id; if (current_state == SCI_PORT_RESETTING) { /* if the port is still in the resetting state then the timeout * fired before the reset completed. */ - port_state_machine_change(sci_port, SCI_PORT_FAILED); + port_state_machine_change(iport, SCI_PORT_FAILED); } else if (current_state == SCI_PORT_STOPPED) { /* if the port is stopped then the start request failed In this * case stay in the stopped state. */ - dev_err(sciport_to_dev(sci_port), + dev_err(sciport_to_dev(iport), "%s: SCIC Port 0x%p failed to stop before tiemout.\n", __func__, - sci_port); + iport); } else if (current_state == SCI_PORT_STOPPING) { /* if the port is still stopping then the stop has not completed */ - isci_port_stop_complete(sci_port->owning_controller, - sci_port, + isci_port_stop_complete(iport->owning_controller, + iport, SCI_FAILURE_TIMEOUT); } else { /* The port is in the ready state and we have a timer * reporting a timeout this should not happen. */ - dev_err(sciport_to_dev(sci_port), + dev_err(sciport_to_dev(iport), "%s: SCIC Port 0x%p is processing a timeout operation " - "in state %d.\n", __func__, sci_port, current_state); + "in state %d.\n", __func__, iport, current_state); } done: @@ -985,29 +980,29 @@ done: * * */ -static void scic_sds_port_update_viit_entry(struct scic_sds_port *sci_port) +static void scic_sds_port_update_viit_entry(struct isci_port *iport) { struct sci_sas_address sas_address; - scic_sds_port_get_sas_address(sci_port, &sas_address); + scic_sds_port_get_sas_address(iport, &sas_address); writel(sas_address.high, - &sci_port->viit_registers->initiator_sas_address_hi); + &iport->viit_registers->initiator_sas_address_hi); writel(sas_address.low, - &sci_port->viit_registers->initiator_sas_address_lo); + &iport->viit_registers->initiator_sas_address_lo); /* This value get cleared just in case its not already cleared */ - writel(0, &sci_port->viit_registers->reserved); + writel(0, &iport->viit_registers->reserved); /* We are required to update the status register last */ writel(SCU_VIIT_ENTRY_ID_VIIT | SCU_VIIT_IPPT_INITIATOR | - ((1 << sci_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | + ((1 << iport->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | SCU_VIIT_STATUS_ALL_VALID, - &sci_port->viit_registers->status); + &iport->viit_registers->status); } -enum sas_linkrate scic_sds_port_get_max_allowed_speed(struct scic_sds_port *sci_port) +enum sas_linkrate scic_sds_port_get_max_allowed_speed(struct isci_port *iport) { u16 index; struct isci_phy *iphy; @@ -1017,8 +1012,8 @@ enum sas_linkrate scic_sds_port_get_max_allowed_speed(struct scic_sds_port *sci_ * Loop through all of the phys in this port and find the phy with the * lowest maximum link rate. */ for (index = 0; index < SCI_MAX_PHYS; index++) { - iphy = sci_port->phy_table[index]; - if (iphy && scic_sds_port_active_phy(sci_port, iphy) && + iphy = iport->phy_table[index]; + if (iphy && scic_sds_port_active_phy(iport, iphy) && iphy->max_negotiated_speed < max_allowed_speed) max_allowed_speed = iphy->max_negotiated_speed; } @@ -1026,13 +1021,13 @@ enum sas_linkrate scic_sds_port_get_max_allowed_speed(struct scic_sds_port *sci_ return max_allowed_speed; } -static void scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port) +static void scic_sds_port_suspend_port_task_scheduler(struct isci_port *iport) { u32 pts_control_value; - pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value = readl(&iport->port_task_scheduler_registers->control); pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); - writel(pts_control_value, &port->port_task_scheduler_registers->control); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); } /** @@ -1044,10 +1039,10 @@ static void scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port * ongoing requests. * */ -static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) +static void scic_sds_port_post_dummy_request(struct isci_port *iport) { - struct scic_sds_controller *scic = sci_port->owning_controller; - u16 tag = sci_port->reserved_tag; + struct scic_sds_controller *scic = iport->owning_controller; + u16 tag = iport->reserved_tag; struct scu_task_context *tc; u32 command; @@ -1055,7 +1050,7 @@ static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) tc->abort = 0; command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | ISCI_TAG_TCI(tag); scic_sds_controller_post_request(scic, command); @@ -1068,10 +1063,10 @@ static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port) * @sci_port: The port on which the task must be aborted. * */ -static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) +static void scic_sds_port_abort_dummy_request(struct isci_port *iport) { - struct scic_sds_controller *scic = sci_port->owning_controller; - u16 tag = sci_port->reserved_tag; + struct scic_sds_controller *scic = iport->owning_controller; + u16 tag = iport->reserved_tag; struct scu_task_context *tc; u32 command; @@ -1079,7 +1074,7 @@ static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) tc->abort = 1; command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT | - sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | ISCI_TAG_TCI(tag); scic_sds_controller_post_request(scic, command); @@ -1087,31 +1082,31 @@ static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port) /** * - * @sci_port: This is the struct scic_sds_port object to resume. + * @sci_port: This is the struct isci_port object to resume. * * This method will resume the port task scheduler for this port object. none */ static void -scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port) +scic_sds_port_resume_port_task_scheduler(struct isci_port *iport) { u32 pts_control_value; - pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value = readl(&iport->port_task_scheduler_registers->control); pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND); - writel(pts_control_value, &port->port_task_scheduler_registers->control); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); } static void scic_sds_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); + struct isci_port *iport = container_of(sm, typeof(*iport), sm); - scic_sds_port_suspend_port_task_scheduler(sci_port); + scic_sds_port_suspend_port_task_scheduler(iport); - sci_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; + iport->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; - if (sci_port->active_phy_mask != 0) { + if (iport->active_phy_mask != 0) { /* At least one of the phys on the port is ready */ - port_state_machine_change(sci_port, + port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); } } @@ -1119,38 +1114,37 @@ static void scic_sds_port_ready_substate_waiting_enter(struct sci_base_state_mac static void scic_sds_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) { u32 index; - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); - struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct scic_sds_controller *scic = iport->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port_to_iport(sci_port); isci_port_ready(ihost, iport); for (index = 0; index < SCI_MAX_PHYS; index++) { - if (sci_port->phy_table[index]) { - writel(sci_port->physical_port_index, - &sci_port->port_pe_configuration_register[ - sci_port->phy_table[index]->phy_index]); + if (iport->phy_table[index]) { + writel(iport->physical_port_index, + &iport->port_pe_configuration_register[ + iport->phy_table[index]->phy_index]); } } - scic_sds_port_update_viit_entry(sci_port); + scic_sds_port_update_viit_entry(iport); - scic_sds_port_resume_port_task_scheduler(sci_port); + scic_sds_port_resume_port_task_scheduler(iport); /* * Post the dummy task for the port so the hardware can schedule * io correctly */ - scic_sds_port_post_dummy_request(sci_port); + scic_sds_port_post_dummy_request(iport); } -static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port) +static void scic_sds_port_invalidate_dummy_remote_node(struct isci_port *iport) { - struct scic_sds_controller *scic = sci_port->owning_controller; - u8 phys_index = sci_port->physical_port_index; + struct scic_sds_controller *scic = iport->owning_controller; + u8 phys_index = iport->physical_port_index; union scu_remote_node_context *rnc; - u16 rni = sci_port->reserved_rni; + u16 rni = iport->reserved_rni; u32 command; rnc = &scic->remote_node_context_table[rni]; @@ -1172,73 +1166,71 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci /** * - * @object: This is the object which is cast to a struct scic_sds_port object. + * @object: This is the object which is cast to a struct isci_port object. * - * This method will perform the actions required by the struct scic_sds_port on + * This method will perform the actions required by the struct isci_port on * exiting the SCI_PORT_SUB_OPERATIONAL. This function reports * the port not ready and suspends the port task scheduler. none */ static void scic_sds_port_ready_substate_operational_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); - struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct scic_sds_controller *scic = iport->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port_to_iport(sci_port); /* * Kill the dummy task for this port if it has not yet posted * the hardware will treat this as a NOP and just return abort * complete. */ - scic_sds_port_abort_dummy_request(sci_port); + scic_sds_port_abort_dummy_request(iport); isci_port_not_ready(ihost, iport); - if (sci_port->ready_exit) - scic_sds_port_invalidate_dummy_remote_node(sci_port); + if (iport->ready_exit) + scic_sds_port_invalidate_dummy_remote_node(iport); } static void scic_sds_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); - struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct scic_sds_controller *scic = iport->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port_to_iport(sci_port); - if (sci_port->active_phy_mask == 0) { + if (iport->active_phy_mask == 0) { isci_port_not_ready(ihost, iport); - port_state_machine_change(sci_port, + port_state_machine_change(iport, SCI_PORT_SUB_WAITING); - } else if (sci_port->started_request_count == 0) - port_state_machine_change(sci_port, + } else if (iport->started_request_count == 0) + port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); } static void scic_sds_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); + struct isci_port *iport = container_of(sm, typeof(*iport), sm); - scic_sds_port_suspend_port_task_scheduler(sci_port); - if (sci_port->ready_exit) - scic_sds_port_invalidate_dummy_remote_node(sci_port); + scic_sds_port_suspend_port_task_scheduler(iport); + if (iport->ready_exit) + scic_sds_port_invalidate_dummy_remote_node(iport); } -enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) +enum sci_status scic_sds_port_start(struct isci_port *iport) { - struct scic_sds_controller *scic = sci_port->owning_controller; + struct scic_sds_controller *scic = iport->owning_controller; enum sci_status status = SCI_SUCCESS; enum scic_sds_port_states state; u32 phy_mask; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; if (state != SCI_PORT_STOPPED) { - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - if (sci_port->assigned_device_count > 0) { + if (iport->assigned_device_count > 0) { /* TODO This is a start failure operation because * there are still devices assigned to this port. * There must be no devices assigned to a port on a @@ -1247,18 +1239,18 @@ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; } - if (sci_port->reserved_rni == SCU_DUMMY_INDEX) { + if (iport->reserved_rni == SCU_DUMMY_INDEX) { u16 rni = scic_sds_remote_node_table_allocate_remote_node( &scic->available_remote_nodes, 1); if (rni != SCU_DUMMY_INDEX) - scic_sds_port_construct_dummy_rnc(sci_port, rni); + scic_sds_port_construct_dummy_rnc(iport, rni); else status = SCI_FAILURE_INSUFFICIENT_RESOURCES; - sci_port->reserved_rni = rni; + iport->reserved_rni = rni; } - if (sci_port->reserved_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + if (iport->reserved_tag == SCI_CONTROLLER_INVALID_IO_TAG) { struct isci_host *ihost = scic_to_ihost(scic); u16 tag; @@ -1266,20 +1258,20 @@ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) if (tag == SCI_CONTROLLER_INVALID_IO_TAG) status = SCI_FAILURE_INSUFFICIENT_RESOURCES; else - scic_sds_port_construct_dummy_task(sci_port, tag); - sci_port->reserved_tag = tag; + scic_sds_port_construct_dummy_task(iport, tag); + iport->reserved_tag = tag; } if (status == SCI_SUCCESS) { - phy_mask = scic_sds_port_get_phys(sci_port); + phy_mask = scic_sds_port_get_phys(iport); /* * There are one or more phys assigned to this port. Make sure * the port's phy mask is in fact legal and supported by the * silicon. */ - if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) { - port_state_machine_change(sci_port, + if (scic_sds_port_is_phy_mask_valid(iport, phy_mask) == true) { + port_state_machine_change(iport, SCI_PORT_READY); return SCI_SUCCESS; @@ -1288,16 +1280,16 @@ enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port) } if (status != SCI_SUCCESS) - scic_sds_port_destroy_dummy_resources(sci_port); + scic_sds_port_destroy_dummy_resources(iport); return status; } -enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port) +enum sci_status scic_sds_port_stop(struct isci_port *iport) { enum scic_sds_port_states state; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; switch (state) { case SCI_PORT_STOPPED: return SCI_SUCCESS; @@ -1305,34 +1297,34 @@ enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port) case SCI_PORT_SUB_OPERATIONAL: case SCI_PORT_SUB_CONFIGURING: case SCI_PORT_RESETTING: - port_state_machine_change(sci_port, + port_state_machine_change(iport, SCI_PORT_STOPPING); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } } -static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 timeout) +static enum sci_status scic_port_hard_reset(struct isci_port *iport, u32 timeout) { enum sci_status status = SCI_FAILURE_INVALID_PHY; struct isci_phy *iphy = NULL; enum scic_sds_port_states state; u32 phy_index; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; if (state != SCI_PORT_SUB_OPERATIONAL) { - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } /* Select a phy on which we can send the hard reset request. */ for (phy_index = 0; phy_index < SCI_MAX_PHYS && !iphy; phy_index++) { - iphy = sci_port->phy_table[phy_index]; - if (iphy && !scic_sds_port_active_phy(sci_port, iphy)) { + iphy = iport->phy_table[phy_index]; + if (iphy && !scic_sds_port_active_phy(iport, iphy)) { /* * We found a phy but it is not ready select * different phy @@ -1349,10 +1341,10 @@ static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 if (status != SCI_SUCCESS) return status; - sci_mod_timer(&sci_port->timer, timeout); - sci_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; + sci_mod_timer(&iport->timer, timeout); + iport->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; - port_state_machine_change(sci_port, SCI_PORT_RESETTING); + port_state_machine_change(iport, SCI_PORT_RESETTING); return SCI_SUCCESS; } @@ -1365,19 +1357,19 @@ static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other * status is a failure to add the phy to the port. */ -enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, +enum sci_status scic_sds_port_add_phy(struct isci_port *iport, struct isci_phy *iphy) { enum sci_status status; enum scic_sds_port_states state; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; switch (state) { case SCI_PORT_STOPPED: { struct sci_sas_address port_sas_address; /* Read the port assigned SAS Address if there is one */ - scic_sds_port_get_sas_address(sci_port, &port_sas_address); + scic_sds_port_get_sas_address(iport, &port_sas_address); if (port_sas_address.high != 0 && port_sas_address.low != 0) { struct sci_sas_address phy_sas_address; @@ -1391,35 +1383,35 @@ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, port_sas_address.low != phy_sas_address.low) return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; } - return scic_sds_port_set_phy(sci_port, iphy); + return scic_sds_port_set_phy(iport, iphy); } case SCI_PORT_SUB_WAITING: case SCI_PORT_SUB_OPERATIONAL: - status = scic_sds_port_set_phy(sci_port, iphy); + status = scic_sds_port_set_phy(iport, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_general_link_up_handler(sci_port, iphy, true); - sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; - port_state_machine_change(sci_port, SCI_PORT_SUB_CONFIGURING); + scic_sds_port_general_link_up_handler(iport, iphy, true); + iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); return status; case SCI_PORT_SUB_CONFIGURING: - status = scic_sds_port_set_phy(sci_port, iphy); + status = scic_sds_port_set_phy(iport, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_general_link_up_handler(sci_port, iphy, true); + scic_sds_port_general_link_up_handler(iport, iphy, true); /* Re-enter the configuring state since this may be the last phy in * the port. */ - port_state_machine_change(sci_port, + port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } @@ -1434,65 +1426,65 @@ enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port, * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any * other status is a failure to add the phy to the port. */ -enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port, +enum sci_status scic_sds_port_remove_phy(struct isci_port *iport, struct isci_phy *iphy) { enum sci_status status; enum scic_sds_port_states state; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; switch (state) { case SCI_PORT_STOPPED: - return scic_sds_port_clear_phy(sci_port, iphy); + return scic_sds_port_clear_phy(iport, iphy); case SCI_PORT_SUB_OPERATIONAL: - status = scic_sds_port_clear_phy(sci_port, iphy); + status = scic_sds_port_clear_phy(iport, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_deactivate_phy(sci_port, iphy, true); - sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; - port_state_machine_change(sci_port, + scic_sds_port_deactivate_phy(iport, iphy, true); + iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; case SCI_PORT_SUB_CONFIGURING: - status = scic_sds_port_clear_phy(sci_port, iphy); + status = scic_sds_port_clear_phy(iport, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_deactivate_phy(sci_port, iphy, true); + scic_sds_port_deactivate_phy(iport, iphy, true); /* Re-enter the configuring state since this may be the last phy in * the port */ - port_state_machine_change(sci_port, + port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } } -enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, +enum sci_status scic_sds_port_link_up(struct isci_port *iport, struct isci_phy *iphy) { enum scic_sds_port_states state; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; switch (state) { case SCI_PORT_SUB_WAITING: /* Since this is the first phy going link up for the port we * can just enable it and continue */ - scic_sds_port_activate_phy(sci_port, iphy, true); + scic_sds_port_activate_phy(iport, iphy, true); - port_state_machine_change(sci_port, + port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); return SCI_SUCCESS; case SCI_PORT_SUB_OPERATIONAL: - scic_sds_port_general_link_up_handler(sci_port, iphy, true); + scic_sds_port_general_link_up_handler(iport, iphy, true); return SCI_SUCCESS; case SCI_PORT_RESETTING: /* TODO We should make sure that the phy that has gone @@ -1509,82 +1501,82 @@ enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_general_link_up_handler(sci_port, iphy, false); + scic_sds_port_general_link_up_handler(iport, iphy, false); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } } -enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, +enum sci_status scic_sds_port_link_down(struct isci_port *iport, struct isci_phy *iphy) { enum scic_sds_port_states state; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; switch (state) { case SCI_PORT_SUB_OPERATIONAL: - scic_sds_port_deactivate_phy(sci_port, iphy, true); + scic_sds_port_deactivate_phy(iport, iphy, true); /* If there are no active phys left in the port, then * transition the port to the WAITING state until such time * as a phy goes link up */ - if (sci_port->active_phy_mask == 0) - port_state_machine_change(sci_port, + if (iport->active_phy_mask == 0) + port_state_machine_change(iport, SCI_PORT_SUB_WAITING); return SCI_SUCCESS; case SCI_PORT_RESETTING: /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_deactivate_phy(sci_port, iphy, false); + scic_sds_port_deactivate_phy(iport, iphy, false); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } } -enum sci_status scic_sds_port_start_io(struct scic_sds_port *sci_port, +enum sci_status scic_sds_port_start_io(struct isci_port *iport, struct scic_sds_remote_device *sci_dev, struct isci_request *ireq) { enum scic_sds_port_states state; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; switch (state) { case SCI_PORT_SUB_WAITING: return SCI_FAILURE_INVALID_STATE; case SCI_PORT_SUB_OPERATIONAL: - sci_port->started_request_count++; + iport->started_request_count++; return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } } -enum sci_status scic_sds_port_complete_io(struct scic_sds_port *sci_port, +enum sci_status scic_sds_port_complete_io(struct isci_port *iport, struct scic_sds_remote_device *sci_dev, struct isci_request *ireq) { enum scic_sds_port_states state; - state = sci_port->sm.current_state_id; + state = iport->sm.current_state_id; switch (state) { case SCI_PORT_STOPPED: - dev_warn(sciport_to_dev(sci_port), + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_PORT_STOPPING: - scic_sds_port_decrement_request_count(sci_port); + scic_sds_port_decrement_request_count(iport); - if (sci_port->started_request_count == 0) - port_state_machine_change(sci_port, + if (iport->started_request_count == 0) + port_state_machine_change(iport, SCI_PORT_STOPPED); break; case SCI_PORT_READY: @@ -1592,12 +1584,12 @@ enum sci_status scic_sds_port_complete_io(struct scic_sds_port *sci_port, case SCI_PORT_FAILED: case SCI_PORT_SUB_WAITING: case SCI_PORT_SUB_OPERATIONAL: - scic_sds_port_decrement_request_count(sci_port); + scic_sds_port_decrement_request_count(iport); break; case SCI_PORT_SUB_CONFIGURING: - scic_sds_port_decrement_request_count(sci_port); - if (sci_port->started_request_count == 0) { - port_state_machine_change(sci_port, + scic_sds_port_decrement_request_count(iport); + if (iport->started_request_count == 0) { + port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); } break; @@ -1613,13 +1605,13 @@ enum sci_status scic_sds_port_complete_io(struct scic_sds_port *sci_port, * will leave the port task scheduler in a suspended state. none */ static void -scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port) +scic_sds_port_enable_port_task_scheduler(struct isci_port *iport) { u32 pts_control_value; - pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value = readl(&iport->port_task_scheduler_registers->control); pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); - writel(pts_control_value, &port->port_task_scheduler_registers->control); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); } /** @@ -1630,22 +1622,22 @@ scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port) * none */ static void -scic_sds_port_disable_port_task_scheduler(struct scic_sds_port *port) +scic_sds_port_disable_port_task_scheduler(struct isci_port *iport) { u32 pts_control_value; - pts_control_value = readl(&port->port_task_scheduler_registers->control); + pts_control_value = readl(&iport->port_task_scheduler_registers->control); pts_control_value &= ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND)); - writel(pts_control_value, &port->port_task_scheduler_registers->control); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); } -static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) +static void scic_sds_port_post_dummy_remote_node(struct isci_port *iport) { - struct scic_sds_controller *scic = sci_port->owning_controller; - u8 phys_index = sci_port->physical_port_index; + struct scic_sds_controller *scic = iport->owning_controller; + u8 phys_index = iport->physical_port_index; union scu_remote_node_context *rnc; - u16 rni = sci_port->reserved_rni; + u16 rni = iport->reserved_rni; u32 command; rnc = &scic->remote_node_context_table[rni]; @@ -1670,67 +1662,65 @@ static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port) static void scic_sds_port_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); + struct isci_port *iport = container_of(sm, typeof(*iport), sm); - if (sci_port->sm.previous_state_id == SCI_PORT_STOPPING) { + if (iport->sm.previous_state_id == SCI_PORT_STOPPING) { /* * If we enter this state becasuse of a request to stop * the port then we want to disable the hardwares port * task scheduler. */ - scic_sds_port_disable_port_task_scheduler(sci_port); + scic_sds_port_disable_port_task_scheduler(iport); } } static void scic_sds_port_stopped_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); + struct isci_port *iport = container_of(sm, typeof(*iport), sm); /* Enable and suspend the port task scheduler */ - scic_sds_port_enable_port_task_scheduler(sci_port); + scic_sds_port_enable_port_task_scheduler(iport); } static void scic_sds_port_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); - struct scic_sds_controller *scic = sci_port->owning_controller; + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct scic_sds_controller *scic = iport->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); - struct isci_port *iport = sci_port_to_iport(sci_port); u32 prev_state; - prev_state = sci_port->sm.previous_state_id; + prev_state = iport->sm.previous_state_id; if (prev_state == SCI_PORT_RESETTING) isci_port_hard_reset_complete(iport, SCI_SUCCESS); else isci_port_not_ready(ihost, iport); /* Post and suspend the dummy remote node context for this port. */ - scic_sds_port_post_dummy_remote_node(sci_port); + scic_sds_port_post_dummy_remote_node(iport); /* Start the ready substate machine */ - port_state_machine_change(sci_port, + port_state_machine_change(iport, SCI_PORT_SUB_WAITING); } static void scic_sds_port_resetting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); + struct isci_port *iport = container_of(sm, typeof(*iport), sm); - sci_del_timer(&sci_port->timer); + sci_del_timer(&iport->timer); } static void scic_sds_port_stopping_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); + struct isci_port *iport = container_of(sm, typeof(*iport), sm); - sci_del_timer(&sci_port->timer); + sci_del_timer(&iport->timer); - scic_sds_port_destroy_dummy_resources(sci_port); + scic_sds_port_destroy_dummy_resources(iport); } static void scic_sds_port_failed_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_port *sci_port = container_of(sm, typeof(*sci_port), sm); - struct isci_port *iport = sci_port_to_iport(sci_port); + struct isci_port *iport = container_of(sm, typeof(*iport), sm); isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); } @@ -1767,30 +1757,30 @@ static const struct sci_base_state scic_sds_port_state_table[] = { } }; -void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index, +void scic_sds_port_construct(struct isci_port *iport, u8 index, struct scic_sds_controller *scic) { - sci_init_sm(&sci_port->sm, scic_sds_port_state_table, SCI_PORT_STOPPED); + sci_init_sm(&iport->sm, scic_sds_port_state_table, SCI_PORT_STOPPED); - sci_port->logical_port_index = SCIC_SDS_DUMMY_PORT; - sci_port->physical_port_index = index; - sci_port->active_phy_mask = 0; - sci_port->ready_exit = false; + iport->logical_port_index = SCIC_SDS_DUMMY_PORT; + iport->physical_port_index = index; + iport->active_phy_mask = 0; + iport->ready_exit = false; - sci_port->owning_controller = scic; + iport->owning_controller = scic; - sci_port->started_request_count = 0; - sci_port->assigned_device_count = 0; + iport->started_request_count = 0; + iport->assigned_device_count = 0; - sci_port->reserved_rni = SCU_DUMMY_INDEX; - sci_port->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; + iport->reserved_rni = SCU_DUMMY_INDEX; + iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; - sci_init_timer(&sci_port->timer, port_timeout); + sci_init_timer(&iport->timer, port_timeout); - sci_port->port_task_scheduler_registers = NULL; + iport->port_task_scheduler_registers = NULL; for (index = 0; index < SCI_MAX_PHYS; index++) - sci_port->phy_table[index] = NULL; + iport->phy_table[index] = NULL; } void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) @@ -1817,14 +1807,14 @@ enum isci_status isci_port_get_state( } void scic_sds_port_broadcast_change_received( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy) { - struct scic_sds_controller *scic = sci_port->owning_controller; + struct scic_sds_controller *scic = iport->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); /* notify the user. */ - isci_port_bc_change_received(ihost, sci_port, iphy); + isci_port_bc_change_received(ihost, iport, iphy); } int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, @@ -1842,7 +1832,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor spin_lock_irqsave(&ihost->scic_lock, flags); #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT - status = scic_port_hard_reset(&iport->sci, ISCI_PORT_RESET_TIMEOUT); + status = scic_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT); spin_unlock_irqrestore(&ihost->scic_lock, flags); @@ -1878,14 +1868,12 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor /* Down all phys in the port. */ spin_lock_irqsave(&ihost->scic_lock, flags); for (idx = 0; idx < SCI_MAX_PHYS; ++idx) { + struct isci_phy *iphy = iport->phy_table[idx]; - if (iport->sci.phy_table[idx] != NULL) { - - scic_sds_phy_stop( - iport->sci.phy_table[idx]); - scic_sds_phy_start( - iport->sci.phy_table[idx]); - } + if (!iphy) + continue; + scic_sds_phy_stop(iphy); + scic_sds_phy_start(iphy); } spin_unlock_irqrestore(&ihost->scic_lock, flags); } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index b6ce56a..cdea48e 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -76,100 +76,19 @@ enum isci_status { }; /** - * struct scic_sds_port - * - * The core port object provides the the abstraction for an SCU port. - */ -struct scic_sds_port { - /** - * This field contains the information for the base port state machine. - */ - struct sci_base_state_machine sm; - - bool ready_exit; - - /** - * This field is the port index that is reported to the SCI USER. - * This allows the actual hardware physical port to change without - * the SCI USER getting a different answer for the get port index. - */ - u8 logical_port_index; - - /** - * This field is the port index used to program the SCU hardware. - */ - u8 physical_port_index; - - /** - * This field contains the active phy mask for the port. - * This mask is used in conjunction with the phy state to determine - * which phy to select for some port operations. - */ - u8 active_phy_mask; - - u16 reserved_rni; - u16 reserved_tag; - - /** - * This field contains the count of the io requests started on this port - * object. It is used to control controller shutdown. - */ - u32 started_request_count; - - /** - * This field contains the number of devices assigned to this port. - * It is used to control port start requests. - */ - u32 assigned_device_count; - - /** - * This field contains the reason for the port not going ready. It is - * assigned in the state handlers and used in the state transition. - */ - u32 not_ready_reason; - - /** - * This field is the table of phys assigned to the port. - */ - struct isci_phy *phy_table[SCI_MAX_PHYS]; - - /** - * This field is a pointer back to the controller that owns this - * port object. - */ - struct scic_sds_controller *owning_controller; - - /* timer used for port start/stop operations */ - struct sci_timer timer; - - /** - * This field is the pointer to the port task scheduler registers - * for the SCU hardware. - */ - struct scu_port_task_scheduler_registers __iomem - *port_task_scheduler_registers; - - /** - * This field is identical for all port objects and points to the port - * task scheduler group PE configuration registers. - * It is used to assign PEs to a port. - */ - u32 __iomem *port_pe_configuration_register; - - /** - * This field is the VIIT register space for ths port object. - */ - struct scu_viit_entry __iomem *viit_registers; -}; - - - -/** - * struct isci_port - This class represents the port object used to internally - * represent libsas port objects. It also keeps a list of remote device - * objects. - * - * + * struct isci_port - isci direct attached sas port object + * @event: counts bcns and port stop events (for bcn filtering) + * @ready_exit: several states constitute 'ready'. When exiting ready we + * need to take extra port-teardown actions that are + * skipped when exiting to another 'ready' state. + * @logical_port_index: software port index + * @physical_port_index: hardware port index + * @active_phy_mask: identifies phy members + * @reserved_tag: + * @reserved_rni: reserver for port task scheduler workaround + * @started_request_count: reference count for outstanding commands + * @not_ready_reason: set during state transitions and notified + * @timer: timeout start/stop operations */ struct isci_port { enum isci_status status; @@ -185,16 +104,25 @@ struct isci_port { struct completion start_complete; struct completion hard_reset_complete; enum sci_status hard_reset_status; - struct scic_sds_port sci; + struct sci_base_state_machine sm; + bool ready_exit; + u8 logical_port_index; + u8 physical_port_index; + u8 active_phy_mask; + u16 reserved_rni; + u16 reserved_tag; + u32 started_request_count; + u32 assigned_device_count; + u32 not_ready_reason; + struct isci_phy *phy_table[SCI_MAX_PHYS]; + struct scic_sds_controller *owning_controller; + struct sci_timer timer; + struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers; + /* XXX rework: only one register, no need to replicate per-port */ + u32 __iomem *port_pe_configuration_register; + struct scu_viit_entry __iomem *viit_registers; }; -static inline struct isci_port *sci_port_to_iport(struct scic_sds_port *sci_port) -{ - struct isci_port *iport = container_of(sci_port, typeof(*iport), sci); - - return iport; -} - enum scic_port_not_ready_reason_code { SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, @@ -299,90 +227,90 @@ enum scic_sds_port_states { ((this_port)->physical_port_index) -static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port) +static inline void scic_sds_port_decrement_request_count(struct isci_port *iport) { - if (WARN_ONCE(sci_port->started_request_count == 0, + if (WARN_ONCE(iport->started_request_count == 0, "%s: tried to decrement started_request_count past 0!?", __func__)) /* pass */; else - sci_port->started_request_count--; + iport->started_request_count--; } #define scic_sds_port_active_phy(port, phy) \ (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) void scic_sds_port_construct( - struct scic_sds_port *sci_port, + struct isci_port *iport, u8 port_index, struct scic_sds_controller *scic); enum sci_status scic_sds_port_initialize( - struct scic_sds_port *sci_port, + struct isci_port *iport, void __iomem *port_task_scheduler_registers, void __iomem *port_configuration_regsiter, void __iomem *viit_registers); -enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port); -enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port); +enum sci_status scic_sds_port_start(struct isci_port *iport); +enum sci_status scic_sds_port_stop(struct isci_port *iport); enum sci_status scic_sds_port_add_phy( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy); enum sci_status scic_sds_port_remove_phy( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy); void scic_sds_port_setup_transports( - struct scic_sds_port *sci_port, + struct isci_port *iport, u32 device_id); void isci_port_bcn_enable(struct isci_host *, struct isci_port *); void scic_sds_port_deactivate_phy( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user); bool scic_sds_port_link_detected( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy); -enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port, +enum sci_status scic_sds_port_link_up(struct isci_port *iport, struct isci_phy *iphy); -enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port, +enum sci_status scic_sds_port_link_down(struct isci_port *iport, struct isci_phy *iphy); struct isci_request; struct scic_sds_remote_device; enum sci_status scic_sds_port_start_io( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct scic_sds_remote_device *sci_dev, struct isci_request *ireq); enum sci_status scic_sds_port_complete_io( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct scic_sds_remote_device *sci_dev, struct isci_request *ireq); enum sas_linkrate scic_sds_port_get_max_allowed_speed( - struct scic_sds_port *sci_port); + struct isci_port *iport); void scic_sds_port_broadcast_change_received( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy); bool scic_sds_port_is_valid_phy_assignment( - struct scic_sds_port *sci_port, + struct isci_port *iport, u32 phy_index); void scic_sds_port_get_sas_address( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct sci_sas_address *sas_address); void scic_sds_port_get_attached_sas_address( - struct scic_sds_port *sci_port, + struct isci_port *iport, struct sci_sas_address *sas_address); enum isci_status isci_port_get_state( diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index 8444fd8..bb62d2a 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -112,7 +112,7 @@ static s32 sci_sas_address_compare( * port. port address if the port can be found to match the phy. * NULL if there is no matching port for the phy. */ -static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( +static struct isci_port *scic_sds_port_configuration_agent_find_port( struct scic_sds_controller *scic, struct isci_phy *iphy) { @@ -132,14 +132,14 @@ static struct scic_sds_port *scic_sds_port_configuration_agent_find_port( for (i = 0; i < scic->logical_port_entries; i++) { struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_port *sci_port = &ihost->ports[i].sci; + struct isci_port *iport = &ihost->ports[i]; - scic_sds_port_get_sas_address(sci_port, &port_sas_address); - scic_sds_port_get_attached_sas_address(sci_port, &port_attached_device_address); + scic_sds_port_get_sas_address(iport, &port_sas_address); + scic_sds_port_get_attached_sas_address(iport, &port_attached_device_address); if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) - return sci_port; + return iport; } return NULL; @@ -315,7 +315,7 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( port_agent->phy_valid_port_range[phy_index].min_index = port_index; port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - scic_sds_port_add_phy(&ihost->ports[port_index].sci, + scic_sds_port_add_phy(&ihost->ports[port_index], &ihost->phys[phy_index]); assigned_phy_mask |= (1 << phy_index); @@ -367,22 +367,20 @@ done: static void scic_sds_mpc_agent_link_up(struct scic_sds_controller *controller, struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *port, + struct isci_port *iport, struct isci_phy *iphy) { - /* If the port has an invalid handle then the phy was not assigned to - * a port. This is because the phy was not given the same SAS Address - * as the other PHYs in the port. + /* If the port is NULL then the phy was not assigned to a port. + * This is because the phy was not given the same SAS Address as + * the other PHYs in the port. */ - if (port != NULL) { - port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(iphy)); - - scic_sds_port_link_up(port, iphy); + if (!iport) + return; - if ((port->active_phy_mask & (1 << scic_sds_phy_get_index(iphy))) != 0) { - port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(iphy)); - } - } + port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(iphy)); + scic_sds_port_link_up(iport, iphy); + if ((iport->active_phy_mask & (1 << scic_sds_phy_get_index(iphy)))) + port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(iphy)); } /** @@ -405,10 +403,10 @@ static void scic_sds_mpc_agent_link_up(struct scic_sds_controller *controller, static void scic_sds_mpc_agent_link_down( struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy) { - if (sci_port != NULL) { + if (iport != NULL) { /* * If we can form a new port from the remainder of the phys * then we want to start the timer to allow the SCI User to @@ -436,7 +434,7 @@ static void scic_sds_mpc_agent_link_down( SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); } - scic_sds_port_link_down(sci_port, iphy); + scic_sds_port_link_down(iport, iphy); } } @@ -496,14 +494,14 @@ static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *contr { u8 port_index; enum sci_status status; - struct scic_sds_port *port; + struct isci_port *iport; enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; struct isci_host *ihost = scic_to_ihost(controller); - port = scic_sds_port_configuration_agent_find_port(controller, iphy); + iport = scic_sds_port_configuration_agent_find_port(controller, iphy); - if (port != NULL) { - if (scic_sds_port_is_valid_phy_assignment(port, iphy->phy_index)) + if (iport) { + if (scic_sds_port_is_valid_phy_assignment(iport, iphy->phy_index)) apc_activity = SCIC_SDS_APC_ADD_PHY; else apc_activity = SCIC_SDS_APC_SKIP_PHY; @@ -514,21 +512,19 @@ static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *contr * the timer and wait to see if a wider port can be made. * * Note the break when we reach the condition of the port id == phy id */ - for ( - port_index = port_agent->phy_valid_port_range[iphy->phy_index].min_index; - port_index <= port_agent->phy_valid_port_range[iphy->phy_index].max_index; - port_index++ - ) { + for (port_index = port_agent->phy_valid_port_range[iphy->phy_index].min_index; + port_index <= port_agent->phy_valid_port_range[iphy->phy_index].max_index; + port_index++) { - port = &ihost->ports[port_index].sci; + iport = &ihost->ports[port_index]; /* First we must make sure that this PHY can be added to this Port. */ - if (scic_sds_port_is_valid_phy_assignment(port, iphy->phy_index)) { + if (scic_sds_port_is_valid_phy_assignment(iport, iphy->phy_index)) { /* * Port contains a PHY with a greater PHY ID than the current * PHY that has gone link up. This phy can not be part of any * port so skip it and move on. */ - if (port->active_phy_mask > (1 << iphy->phy_index)) { + if (iport->active_phy_mask > (1 << iphy->phy_index)) { apc_activity = SCIC_SDS_APC_SKIP_PHY; break; } @@ -537,7 +533,7 @@ static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *contr * We have reached the end of our Port list and have not found * any reason why we should not either add the PHY to the port * or wait for more phys to become active. */ - if (port->physical_port_index == iphy->phy_index) { + if (iport->physical_port_index == iphy->phy_index) { /* * The Port either has no active PHYs. * Consider that if the port had any active PHYs we would have @@ -554,10 +550,10 @@ static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *contr * The current Port has no active PHYs and this PHY could be part * of this Port. Since we dont know as yet setup to start the * timer and see if there is a better configuration. */ - if (port->active_phy_mask == 0) { + if (iport->active_phy_mask == 0) { apc_activity = SCIC_SDS_APC_START_TIMER; } - } else if (port->active_phy_mask != 0) { + } else if (iport->active_phy_mask != 0) { /* * The Port has an active phy and the current Phy can not * participate in this port so skip the PHY and see if @@ -583,7 +579,7 @@ static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *contr switch (apc_activity) { case SCIC_SDS_APC_ADD_PHY: - status = scic_sds_port_add_phy(port, iphy); + status = scic_sds_port_add_phy(iport, iphy); if (status == SCI_SUCCESS) { port_agent->phy_configured_mask |= (1 << iphy->phy_index); @@ -625,18 +621,18 @@ static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *contr */ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *sci_port, + struct isci_port *iport, struct isci_phy *iphy) { u8 phy_index = iphy->phy_index; - if (!sci_port) { + if (!iport) { /* the phy is not the part of this port */ port_agent->phy_ready_mask |= 1 << phy_index; scic_sds_apc_agent_configure_ports(scic, port_agent, iphy, true); } else { /* the phy is already the part of the port */ - u32 port_state = sci_port->sm.current_state_id; + u32 port_state = iport->sm.current_state_id; /* if the PORT'S state is resetting then the link up is from * port hard reset in this case, we need to tell the port @@ -644,7 +640,7 @@ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, */ BUG_ON(port_state != SCI_PORT_RESETTING); port_agent->phy_ready_mask |= 1 << phy_index; - scic_sds_port_link_up(sci_port, iphy); + scic_sds_port_link_up(iport, iphy); } } @@ -652,9 +648,9 @@ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, * * @controller: This is the controller object that receives the link down * notification. - * @port: This is the port object associated with the phy. If the is no + * @iport: This is the port object associated with the phy. If the is no * associated port this is an NULL. - * @phy: This is the phy object which has gone link down. + * @iphy: This is the phy object which has gone link down. * * This method handles the automatic port configuration link down * notifications. not associated with a port there is no action taken. Is it @@ -664,21 +660,20 @@ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, static void scic_sds_apc_agent_link_down( struct scic_sds_controller *controller, struct scic_sds_port_configuration_agent *port_agent, - struct scic_sds_port *port, + struct isci_port *iport, struct isci_phy *iphy) { port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(iphy)); - if (port != NULL) { - if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) { - enum sci_status status; + if (!iport) + return; + if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) { + enum sci_status status; - status = scic_sds_port_remove_phy(port, iphy); + status = scic_sds_port_remove_phy(iport, iphy); - if (status == SCI_SUCCESS) { - port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); - } - } + if (status == SCI_SUCCESS) + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); } } diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 71ab908..627cf73 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -450,11 +450,11 @@ static void scic_sds_remote_device_start_request(struct scic_sds_remote_device * struct isci_request *ireq, enum sci_status status) { - struct scic_sds_port *sci_port = sci_dev->owning_port; + struct isci_port *iport = sci_dev->owning_port; /* cleanup requests that failed after starting on the port */ if (status != SCI_SUCCESS) - scic_sds_port_complete_io(sci_port, sci_dev, ireq); + scic_sds_port_complete_io(iport, sci_dev, ireq); else { kref_get(&sci_dev_to_idev(sci_dev)->kref); scic_sds_remote_device_increment_request_count(sci_dev); @@ -467,7 +467,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic { struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct scic_sds_port *sci_port = sci_dev->owning_port; + struct isci_port *iport = sci_dev->owning_port; enum sci_status status; switch (state) { @@ -489,7 +489,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic * successful it will start the request for the port object then * increment its own request count. */ - status = scic_sds_port_start_io(sci_port, sci_dev, ireq); + status = scic_sds_port_start_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) return status; @@ -511,7 +511,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic enum scic_sds_remote_device_states new_state; struct sas_task *task = isci_request_access_task(ireq); - status = scic_sds_port_start_io(sci_port, sci_dev, ireq); + status = scic_sds_port_start_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) return status; @@ -536,7 +536,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic struct sas_task *task = isci_request_access_task(ireq); if (task->ata_task.use_ncq) { - status = scic_sds_port_start_io(sci_port, sci_dev, ireq); + status = scic_sds_port_start_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) return status; @@ -552,7 +552,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic case SCI_STP_DEV_AWAIT_RESET: return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; case SCI_SMP_DEV_IDLE: - status = scic_sds_port_start_io(sci_port, sci_dev, ireq); + status = scic_sds_port_start_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) return status; @@ -579,7 +579,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic return status; } -static enum sci_status common_complete_io(struct scic_sds_port *sci_port, +static enum sci_status common_complete_io(struct isci_port *iport, struct scic_sds_remote_device *sci_dev, struct isci_request *ireq) { @@ -589,7 +589,7 @@ static enum sci_status common_complete_io(struct scic_sds_port *sci_port, if (status != SCI_SUCCESS) return status; - status = scic_sds_port_complete_io(sci_port, sci_dev, ireq); + status = scic_sds_port_complete_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) return status; @@ -603,7 +603,7 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s { struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct scic_sds_port *sci_port = sci_dev->owning_port; + struct isci_port *iport = sci_dev->owning_port; enum sci_status status; switch (state) { @@ -621,12 +621,12 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s case SCI_DEV_READY: case SCI_STP_DEV_AWAIT_RESET: case SCI_DEV_RESETTING: - status = common_complete_io(sci_port, sci_dev, ireq); + status = common_complete_io(iport, sci_dev, ireq); break; case SCI_STP_DEV_CMD: case SCI_STP_DEV_NCQ: case SCI_STP_DEV_NCQ_ERROR: - status = common_complete_io(sci_port, sci_dev, ireq); + status = common_complete_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) break; @@ -641,13 +641,13 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s sci_change_state(sm, SCI_STP_DEV_IDLE); break; case SCI_SMP_DEV_CMD: - status = common_complete_io(sci_port, sci_dev, ireq); + status = common_complete_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) break; sci_change_state(sm, SCI_SMP_DEV_IDLE); break; case SCI_DEV_STOPPING: - status = common_complete_io(sci_port, sci_dev, ireq); + status = common_complete_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) break; @@ -661,7 +661,7 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s if (status != SCI_SUCCESS) dev_err(scirdev_to_dev(sci_dev), "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " - "could not complete\n", __func__, sci_port, + "could not complete\n", __func__, iport, sci_dev, ireq, status); else isci_put_device(sci_dev_to_idev(sci_dev)); @@ -684,7 +684,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc { struct sci_base_state_machine *sm = &sci_dev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct scic_sds_port *sci_port = sci_dev->owning_port; + struct isci_port *iport = sci_dev->owning_port; enum sci_status status; switch (state) { @@ -706,7 +706,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc case SCI_STP_DEV_NCQ: case SCI_STP_DEV_NCQ_ERROR: case SCI_STP_DEV_AWAIT_RESET: - status = scic_sds_port_start_io(sci_port, sci_dev, ireq); + status = scic_sds_port_start_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) return status; @@ -746,7 +746,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc */ return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; case SCI_DEV_READY: - status = scic_sds_port_start_io(sci_port, sci_dev, ireq); + status = scic_sds_port_start_io(iport, sci_dev, ireq); if (status != SCI_SUCCESS) return status; @@ -1064,10 +1064,10 @@ static const struct sci_base_state scic_sds_remote_device_state_table[] = { * scic_remote_device_[de]a_construct(). scic_remote_device_destruct() * frees the remote_node_context(s) for the device. */ -static void scic_remote_device_construct(struct scic_sds_port *sci_port, +static void scic_remote_device_construct(struct isci_port *iport, struct scic_sds_remote_device *sci_dev) { - sci_dev->owning_port = sci_port; + sci_dev->owning_port = iport; sci_dev->started_request_count = 0; sci_init_sm(&sci_dev->sm, scic_sds_remote_device_state_table, SCI_DEV_INITIAL); @@ -1090,20 +1090,20 @@ static void scic_remote_device_construct(struct scic_sds_port *sci_port, * sata-only controller instance. * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ -static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci_port, +static enum sci_status scic_remote_device_da_construct(struct isci_port *iport, struct scic_sds_remote_device *sci_dev) { enum sci_status status; struct domain_device *dev = sci_dev_to_domain(sci_dev); - scic_remote_device_construct(sci_port, sci_dev); + scic_remote_device_construct(iport, sci_dev); /* * This information is request to determine how many remote node context * entries will be needed to store the remote node. */ sci_dev->is_direct_attached = true; - status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller, + status = scic_sds_controller_allocate_remote_node_context(iport->owning_controller, sci_dev, &sci_dev->rnc.remote_node_index); @@ -1116,7 +1116,7 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; - sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(sci_port); + sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(iport); /* / @todo Should I assign the port width by reading all of the phys on the port? */ sci_dev->device_port_width = 1; @@ -1136,15 +1136,15 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci * sata-only controller instance. * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ -static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci_port, +static enum sci_status scic_remote_device_ea_construct(struct isci_port *iport, struct scic_sds_remote_device *sci_dev) { struct domain_device *dev = sci_dev_to_domain(sci_dev); enum sci_status status; - scic_remote_device_construct(sci_port, sci_dev); + scic_remote_device_construct(iport, sci_dev); - status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller, + status = scic_sds_controller_allocate_remote_node_context(iport->owning_controller, sci_dev, &sci_dev->rnc.remote_node_index); if (status != SCI_SUCCESS) @@ -1163,7 +1163,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci * connection the logical link rate is that same as the * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay * one another, so this code works for both situations. */ - sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(sci_port), + sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(iport), dev->linkrate); /* / @todo Should I assign the port width by reading all of the phys on the port? */ @@ -1212,15 +1212,14 @@ static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *s static enum sci_status isci_remote_device_construct(struct isci_port *iport, struct isci_remote_device *idev) { - struct scic_sds_port *sci_port = &iport->sci; struct isci_host *ihost = iport->isci_host; struct domain_device *dev = idev->domain_dev; enum sci_status status; if (dev->parent && dev_is_expander(dev->parent)) - status = scic_remote_device_ea_construct(sci_port, &idev->sci); + status = scic_remote_device_ea_construct(iport, &idev->sci); else - status = scic_remote_device_da_construct(sci_port, &idev->sci); + status = scic_remote_device_da_construct(iport, &idev->sci); if (status != SCI_SUCCESS) { dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n", diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 6ac5dfb..578d75b 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -100,7 +100,7 @@ struct scic_sds_remote_device { * This filed contains a pointer back to the port to which this device * is assigned. */ - struct scic_sds_port *owning_port; + struct isci_port *owning_port; /** * This field contains the SCU silicon remote node context specific @@ -388,14 +388,6 @@ static inline bool dev_is_expander(struct domain_device *dev) ((sci_dev)->started_request_count) /** - * scic_sds_remote_device_get_port() - - * - * This macro returns the owning port of this remote device obejct. - */ -#define scic_sds_remote_device_get_port(sci_dev) \ - ((sci_dev)->owning_port) - -/** * scic_sds_remote_device_get_controller() - * * This macro returns the controller object that contains this device object diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index c544bc7..2d29abf 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -210,10 +210,10 @@ static void scu_ssp_reqeust_construct_task_context( { dma_addr_t dma_addr; struct scic_sds_remote_device *target_device; - struct scic_sds_port *target_port; + struct isci_port *iport; target_device = scic_sds_request_get_device(ireq); - target_port = scic_sds_request_get_port(ireq); + iport = scic_sds_request_get_port(ireq); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -222,8 +222,7 @@ static void scu_ssp_reqeust_construct_task_context( task_context->connection_rate = target_device->connection_rate; task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(controller); - task_context->logical_port_index = - scic_sds_port_get_index(target_port); + task_context->logical_port_index = scic_sds_port_get_index(iport); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; @@ -245,11 +244,11 @@ static void scu_ssp_reqeust_construct_task_context( task_context->task_phase = 0x01; ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(ireq->io_tag)); + (scic_sds_controller_get_protocol_engine_group(controller) << + SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (scic_sds_port_get_index(iport) << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); /* * Copy the physical address for the command buffer to the @@ -350,10 +349,10 @@ static void scu_sata_reqeust_construct_task_context( { dma_addr_t dma_addr; struct scic_sds_remote_device *target_device; - struct scic_sds_port *target_port; + struct isci_port *iport; target_device = scic_sds_request_get_device(ireq); - target_port = scic_sds_request_get_port(ireq); + iport = scic_sds_request_get_port(ireq); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -363,7 +362,7 @@ static void scu_sata_reqeust_construct_task_context( task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = - scic_sds_port_get_index(target_port); + scic_sds_port_get_index(iport); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; @@ -391,7 +390,7 @@ static void scu_sata_reqeust_construct_task_context( ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | (scic_sds_controller_get_protocol_engine_group(controller) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(target_port) << + (scic_sds_port_get_index(iport) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | ISCI_TAG_TCI(ireq->io_tag)); /* @@ -3105,7 +3104,7 @@ scic_io_request_construct_smp(struct device *dev, struct scatterlist *sg = &task->smp_task.smp_req; struct scic_sds_remote_device *sci_dev; struct scu_task_context *task_context; - struct scic_sds_port *sci_port; + struct isci_port *iport; struct smp_req *smp_req; void *kaddr; u8 req_len; @@ -3149,7 +3148,7 @@ scic_io_request_construct_smp(struct device *dev, task_context = ireq->tc; sci_dev = scic_sds_request_get_device(ireq); - sci_port = scic_sds_request_get_port(ireq); + iport = scic_sds_request_get_port(ireq); /* * Fill in the TC with the its required data @@ -3160,7 +3159,7 @@ scic_io_request_construct_smp(struct device *dev, task_context->connection_rate = sci_dev->connection_rate; task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(scic); - task_context->logical_port_index = scic_sds_port_get_index(sci_port); + task_context->logical_port_index = scic_sds_port_get_index(iport); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; task_context->abort = 0; task_context->valid = SCU_TASK_CONTEXT_VALID; @@ -3204,7 +3203,7 @@ scic_io_request_construct_smp(struct device *dev, ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | (scic_sds_controller_get_protocol_engine_group(scic) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(sci_port) << + (scic_sds_port_get_index(iport) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | ISCI_TAG_TCI(ireq->io_tag)); /* -- cgit v0.10.2 From 78a6f06e0e82125787d7aa308fe28c2c8381540c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 30 Jun 2011 16:31:37 -0700 Subject: isci: unify isci_remote_device and scic_sds_remote_device Remove the distinction between these two implementations and unify on isci_remote_device (local instances named idev). Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 4e11f9e..45d7f71 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -272,7 +272,7 @@ static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic { u32 index; struct isci_request *ireq; - struct scic_sds_remote_device *device; + struct isci_remote_device *idev; index = SCU_GET_COMPLETION_INDEX(completion_entry); @@ -289,9 +289,9 @@ static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: - device = scic->device_table[index]; + idev = scic->device_table[index]; dev_warn(scic_to_dev(scic), "%s: %x for device %p\n", - __func__, completion_entry, device); + __func__, completion_entry, idev); /* @todo For a port RNC operation we need to fail the * device */ @@ -312,7 +312,7 @@ static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *sc struct isci_host *ihost = scic_to_ihost(scic); struct scu_unsolicited_frame_header *frame_header; struct isci_phy *iphy; - struct scic_sds_remote_device *device; + struct isci_remote_device *idev; enum sci_status result = SCI_FAILURE; @@ -348,12 +348,12 @@ static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *sc result = scic_sds_phy_frame_handler(iphy, frame_index); } else { if (index < scic->remote_node_entries) - device = scic->device_table[index]; + idev = scic->device_table[index]; else - device = NULL; + idev = NULL; - if (device != NULL) - result = scic_sds_remote_device_frame_handler(device, frame_index); + if (idev != NULL) + result = scic_sds_remote_device_frame_handler(idev, frame_index); else scic_sds_controller_release_frame(scic, frame_index); } @@ -370,7 +370,7 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci u32 completion_entry) { struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_remote_device *device; + struct isci_remote_device *idev; struct isci_request *ireq; struct isci_phy *iphy; u32 index; @@ -426,9 +426,9 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci break; case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: - device = scic->device_table[index]; - if (device != NULL) - scic_sds_remote_device_event_handler(device, completion_entry); + idev = scic->device_table[index]; + if (idev != NULL) + scic_sds_remote_device_event_handler(idev, completion_entry); else dev_warn(scic_to_dev(scic), "%s: SCIC Controller 0x%p received " @@ -460,10 +460,10 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: case SCU_EVENT_TYPE_RNC_OPS_MISC: if (index < scic->remote_node_entries) { - device = scic->device_table[index]; + idev = scic->device_table[index]; - if (device != NULL) - scic_sds_remote_device_event_handler(device, completion_entry); + if (idev != NULL) + scic_sds_remote_device_event_handler(idev, completion_entry); } else dev_err(scic_to_dev(scic), "%s: SCIC Controller 0x%p received event 0x%x " @@ -2549,13 +2549,13 @@ static bool scic_sds_controller_has_remote_devices_stopping( * object that the remote device has stopped. */ void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev) + struct isci_remote_device *idev) { if (scic->sm.current_state_id != SCIC_STOPPING) { dev_dbg(scic_to_dev(scic), "SCIC Controller 0x%p remote device stopped event " "from device 0x%p in unexpected state %d\n", - scic, sci_dev, + scic, idev, scic->sm.current_state_id); return; } @@ -2622,18 +2622,18 @@ struct isci_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 i */ enum sci_status scic_sds_controller_allocate_remote_node_context( struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u16 *node_id) { u16 node_index; - u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); + u32 remote_node_count = scic_sds_remote_device_node_count(idev); node_index = scic_sds_remote_node_table_allocate_remote_node( &scic->available_remote_nodes, remote_node_count ); if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - scic->device_table[node_index] = sci_dev; + scic->device_table[node_index] = idev; *node_id = node_index; @@ -2654,12 +2654,12 @@ enum sci_status scic_sds_controller_allocate_remote_node_context( */ void scic_sds_controller_free_remote_node_context( struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u16 node_id) { - u32 remote_node_count = scic_sds_remote_device_node_count(sci_dev); + u32 remote_node_count = scic_sds_remote_device_node_count(idev); - if (scic->device_table[node_id] == sci_dev) { + if (scic->device_table[node_id] == idev) { scic->device_table[node_id] = NULL; scic_sds_remote_node_table_release_remote_node_index( @@ -2798,7 +2798,7 @@ enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) * user desires to be utilized for this request. */ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, + struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; @@ -2808,7 +2808,7 @@ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, return SCI_FAILURE_INVALID_STATE; } - status = scic_sds_remote_device_start_io(scic, rdev, ireq); + status = scic_sds_remote_device_start_io(scic, idev, ireq); if (status != SCI_SUCCESS) return status; @@ -2835,7 +2835,7 @@ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, */ enum sci_status scic_controller_terminate_request( struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, + struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; @@ -2873,7 +2873,7 @@ enum sci_status scic_controller_terminate_request( */ enum sci_status scic_controller_complete_io( struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, + struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; @@ -2884,7 +2884,7 @@ enum sci_status scic_controller_complete_io( /* XXX: Implement this function */ return SCI_FAILURE; case SCIC_READY: - status = scic_sds_remote_device_complete_io(scic, rdev, ireq); + status = scic_sds_remote_device_complete_io(scic, idev, ireq); if (status != SCI_SUCCESS) return status; @@ -2923,7 +2923,7 @@ enum sci_status scic_controller_continue_io(struct isci_request *ireq) */ enum sci_task_status scic_controller_start_task( struct scic_sds_controller *scic, - struct scic_sds_remote_device *rdev, + struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; @@ -2936,7 +2936,7 @@ enum sci_task_status scic_controller_start_task( return SCI_TASK_FAILURE_INVALID_STATE; } - status = scic_sds_remote_device_start_task(scic, rdev, ireq); + status = scic_sds_remote_device_start_task(scic, idev, ireq); switch (status) { case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: set_bit(IREQ_ACTIVE, &ireq->flags); diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index fb8048e..ca2e3b0 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -163,7 +163,7 @@ struct scic_sds_controller { * objects that need to handle device completion notifications from the * hardware. The table is RNi based. */ - struct scic_sds_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; + struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; /** * This field is the free RNi data structure @@ -488,12 +488,12 @@ static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic) #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) /* expander attached sata devices require 3 rnc slots */ -static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev) +static inline int scic_sds_remote_device_node_count(struct isci_remote_device *idev) { - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct domain_device *dev = idev->domain_dev; if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && - !sci_dev->is_direct_attached) + !idev->is_direct_attached) return SCU_STP_REMOTE_NODE_COUNT; return SCU_SSP_REMOTE_NODE_COUNT; } @@ -541,11 +541,8 @@ static inline struct device *sciport_to_dev(struct isci_port *iport) return &iport->isci_host->pdev->dev; } -static inline struct device *scirdev_to_dev(struct scic_sds_remote_device *sci_dev) +static inline struct device *scirdev_to_dev(struct isci_remote_device *idev) { - struct isci_remote_device *idev = - container_of(sci_dev, typeof(*idev), sci); - if (!idev || !idev->isci_port || !idev->isci_port->isci_host) return NULL; @@ -589,11 +586,11 @@ void scic_sds_controller_copy_sata_response(void *response_buffer, void *frame_header, void *frame_buffer); enum sci_status scic_sds_controller_allocate_remote_node_context(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u16 *node_id); void scic_sds_controller_free_remote_node_context( struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u16 node_id); union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( struct scic_sds_controller *scic, @@ -622,7 +619,7 @@ void scic_sds_controller_link_down( void scic_sds_controller_remote_device_stopped( struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev); + struct isci_remote_device *idev); void scic_sds_controller_copy_task_context( struct scic_sds_controller *scic, @@ -662,22 +659,22 @@ void scic_controller_disable_interrupts( enum sci_status scic_controller_start_io( struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, + struct isci_remote_device *idev, struct isci_request *ireq); enum sci_task_status scic_controller_start_task( struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, + struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_controller_terminate_request( struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, + struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_controller_complete_io( struct scic_sds_controller *scic, - struct scic_sds_remote_device *remote_device, + struct isci_remote_device *idev, struct isci_request *ireq); void scic_sds_port_configuration_agent_construct( diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 0459188..df37b1b 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1541,7 +1541,7 @@ enum sci_status scic_sds_port_link_down(struct isci_port *iport, } enum sci_status scic_sds_port_start_io(struct isci_port *iport, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq) { enum scic_sds_port_states state; @@ -1561,7 +1561,7 @@ enum sci_status scic_sds_port_start_io(struct isci_port *iport, } enum sci_status scic_sds_port_complete_io(struct isci_port *iport, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq) { enum scic_sds_port_states state; diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index cdea48e..b9bc89b 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -283,15 +283,15 @@ enum sci_status scic_sds_port_link_down(struct isci_port *iport, struct isci_phy *iphy); struct isci_request; -struct scic_sds_remote_device; +struct isci_remote_device; enum sci_status scic_sds_port_start_io( struct isci_port *iport, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_sds_port_complete_io( struct isci_port *iport, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq); enum sas_linkrate scic_sds_port_get_max_allowed_speed( diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 627cf73..3b02340 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -93,7 +93,7 @@ static void isci_remote_device_not_ready(struct isci_host *ihost, __func__, idev, ireq); scic_controller_terminate_request(&ihost->sci, - &idev->sci, + idev, ireq); } /* Fall through into the default case... */ @@ -127,15 +127,15 @@ static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote */ static void rnc_destruct_done(void *_dev) { - struct scic_sds_remote_device *sci_dev = _dev; + struct isci_remote_device *idev = _dev; - BUG_ON(sci_dev->started_request_count != 0); - sci_change_state(&sci_dev->sm, SCI_DEV_STOPPED); + BUG_ON(idev->started_request_count != 0); + sci_change_state(&idev->sm, SCI_DEV_STOPPED); } -static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds_remote_device *sci_dev) +static enum sci_status scic_sds_remote_device_terminate_requests(struct isci_remote_device *idev) { - struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + struct scic_sds_controller *scic = idev->owning_port->owning_controller; struct isci_host *ihost = scic_to_ihost(scic); enum sci_status status = SCI_SUCCESS; u32 i; @@ -145,10 +145,10 @@ static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds enum sci_status s; if (!test_bit(IREQ_ACTIVE, &ireq->flags) || - ireq->target_device != sci_dev) + ireq->target_device != idev) continue; - s = scic_controller_terminate_request(scic, sci_dev, ireq); + s = scic_controller_terminate_request(scic, idev, ireq); if (s != SCI_SUCCESS) status = s; } @@ -156,10 +156,10 @@ static enum sci_status scic_sds_remote_device_terminate_requests(struct scic_sds return status; } -enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, +enum sci_status scic_remote_device_stop(struct isci_remote_device *idev, u32 timeout) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; switch (state) { @@ -167,16 +167,16 @@ enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, case SCI_DEV_FAILED: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_STOPPED: return SCI_SUCCESS; case SCI_DEV_STARTING: /* device not started so there had better be no requests */ - BUG_ON(sci_dev->started_request_count != 0); - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - rnc_destruct_done, sci_dev); + BUG_ON(idev->started_request_count != 0); + scic_sds_remote_node_context_destruct(&idev->rnc, + rnc_destruct_done, idev); /* Transition to the stopping state and wait for the * remote node to complete being posted and invalidated. */ @@ -191,28 +191,28 @@ enum sci_status scic_remote_device_stop(struct scic_sds_remote_device *sci_dev, case SCI_SMP_DEV_IDLE: case SCI_SMP_DEV_CMD: sci_change_state(sm, SCI_DEV_STOPPING); - if (sci_dev->started_request_count == 0) { - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - rnc_destruct_done, sci_dev); + if (idev->started_request_count == 0) { + scic_sds_remote_node_context_destruct(&idev->rnc, + rnc_destruct_done, idev); return SCI_SUCCESS; } else - return scic_sds_remote_device_terminate_requests(sci_dev); + return scic_sds_remote_device_terminate_requests(idev); break; case SCI_DEV_STOPPING: /* All requests should have been terminated, but if there is an * attempt to stop a device already in the stopping state, then * try again to terminate. */ - return scic_sds_remote_device_terminate_requests(sci_dev); + return scic_sds_remote_device_terminate_requests(idev); case SCI_DEV_RESETTING: sci_change_state(sm, SCI_DEV_STOPPING); return SCI_SUCCESS; } } -enum sci_status scic_remote_device_reset(struct scic_sds_remote_device *sci_dev) +enum sci_status scic_remote_device_reset(struct isci_remote_device *idev) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; switch (state) { @@ -226,7 +226,7 @@ enum sci_status scic_remote_device_reset(struct scic_sds_remote_device *sci_dev) case SCI_DEV_RESETTING: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_READY: @@ -240,13 +240,13 @@ enum sci_status scic_remote_device_reset(struct scic_sds_remote_device *sci_dev) } } -enum sci_status scic_remote_device_reset_complete(struct scic_sds_remote_device *sci_dev) +enum sci_status scic_remote_device_reset_complete(struct isci_remote_device *idev) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; if (state != SCI_DEV_RESETTING) { - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } @@ -255,28 +255,28 @@ enum sci_status scic_remote_device_reset_complete(struct scic_sds_remote_device return SCI_SUCCESS; } -enum sci_status scic_sds_remote_device_suspend(struct scic_sds_remote_device *sci_dev, +enum sci_status scic_sds_remote_device_suspend(struct isci_remote_device *idev, u32 suspend_type) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; if (state != SCI_STP_DEV_CMD) { - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - return scic_sds_remote_node_context_suspend(&sci_dev->rnc, + return scic_sds_remote_node_context_suspend(&idev->rnc, suspend_type, NULL, NULL); } -enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_device *sci_dev, +enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device *idev, u32 frame_index) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + struct scic_sds_controller *scic = idev->owning_port->owning_controller; enum sci_status status; switch (state) { @@ -287,7 +287,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi case SCI_SMP_DEV_IDLE: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); /* Return the frame back to the controller */ scic_sds_controller_release_frame(scic, frame_index); @@ -313,7 +313,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi sci_swab32_cpy(&hdr, frame_header, word_cnt); ireq = scic_request_by_tag(scic, be16_to_cpu(hdr.tag)); - if (ireq && ireq->target_device == sci_dev) { + if (ireq && ireq->target_device == idev) { /* The IO request is now in charge of releasing the frame */ status = scic_sds_io_request_frame_handler(ireq, frame_index); } else { @@ -335,7 +335,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi if (hdr->fis_type == FIS_SETDEVBITS && (hdr->status & ATA_ERR)) { - sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + idev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; /* TODO Check sactive and complete associated IO if any. */ sci_change_state(sm, SCI_STP_DEV_NCQ_ERROR); @@ -345,8 +345,8 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi * Some devices return D2H FIS when an NCQ error is detected. * Treat this like an SDB error FIS ready reason. */ - sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; - sci_change_state(&sci_dev->sm, SCI_STP_DEV_NCQ_ERROR); + idev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + sci_change_state(&idev->sm, SCI_STP_DEV_NCQ_ERROR); } else status = SCI_FAILURE; @@ -359,17 +359,17 @@ enum sci_status scic_sds_remote_device_frame_handler(struct scic_sds_remote_devi * in this state. All unsolicited frames are forwarded to the io request * object. */ - status = scic_sds_io_request_frame_handler(sci_dev->working_request, frame_index); + status = scic_sds_io_request_frame_handler(idev->working_request, frame_index); break; } return status; } -static bool is_remote_device_ready(struct scic_sds_remote_device *sci_dev) +static bool is_remote_device_ready(struct isci_remote_device *idev) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; switch (state) { @@ -387,10 +387,10 @@ static bool is_remote_device_ready(struct scic_sds_remote_device *sci_dev) } } -enum sci_status scic_sds_remote_device_event_handler(struct scic_sds_remote_device *sci_dev, +enum sci_status scic_sds_remote_device_event_handler(struct isci_remote_device *idev, u32 event_code) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; enum sci_status status; @@ -398,21 +398,21 @@ enum sci_status scic_sds_remote_device_event_handler(struct scic_sds_remote_devi case SCU_EVENT_TYPE_RNC_OPS_MISC: case SCU_EVENT_TYPE_RNC_SUSPEND_TX: case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); + status = scic_sds_remote_node_context_event_handler(&idev->rnc, event_code); break; case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { status = SCI_SUCCESS; /* Suspend the associated RNC */ - scic_sds_remote_node_context_suspend(&sci_dev->rnc, + scic_sds_remote_node_context_suspend(&idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); - dev_dbg(scirdev_to_dev(sci_dev), + dev_dbg(scirdev_to_dev(idev), "%s: device: %p event code: %x: %s\n", - __func__, sci_dev, event_code, - is_remote_device_ready(sci_dev) + __func__, idev, event_code, + is_remote_device_ready(idev) ? "I_T_Nexus_Timeout event" : "I_T_Nexus_Timeout event in wrong state"); @@ -420,10 +420,10 @@ enum sci_status scic_sds_remote_device_event_handler(struct scic_sds_remote_devi } /* Else, fall through and treat as unhandled... */ default: - dev_dbg(scirdev_to_dev(sci_dev), + dev_dbg(scirdev_to_dev(idev), "%s: device: %p event code: %x: %s\n", - __func__, sci_dev, event_code, - is_remote_device_ready(sci_dev) + __func__, idev, event_code, + is_remote_device_ready(idev) ? "unexpected event" : "unexpected event in wrong state"); status = SCI_FAILURE_INVALID_STATE; @@ -440,34 +440,34 @@ enum sci_status scic_sds_remote_device_event_handler(struct scic_sds_remote_devi */ if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) - status = scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); + status = scic_sds_remote_node_context_resume(&idev->rnc, NULL, NULL); } return status; } -static void scic_sds_remote_device_start_request(struct scic_sds_remote_device *sci_dev, +static void scic_sds_remote_device_start_request(struct isci_remote_device *idev, struct isci_request *ireq, enum sci_status status) { - struct isci_port *iport = sci_dev->owning_port; + struct isci_port *iport = idev->owning_port; /* cleanup requests that failed after starting on the port */ if (status != SCI_SUCCESS) - scic_sds_port_complete_io(iport, sci_dev, ireq); + scic_sds_port_complete_io(iport, idev, ireq); else { - kref_get(&sci_dev_to_idev(sci_dev)->kref); - scic_sds_remote_device_increment_request_count(sci_dev); + kref_get(&idev->kref); + scic_sds_remote_device_increment_request_count(idev); } } enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct isci_port *iport = sci_dev->owning_port; + struct isci_port *iport = idev->owning_port; enum sci_status status; switch (state) { @@ -480,7 +480,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic case SCI_DEV_RESETTING: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_READY: @@ -489,11 +489,11 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic * successful it will start the request for the port object then * increment its own request count. */ - status = scic_sds_port_start_io(iport, sci_dev, ireq); + status = scic_sds_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, ireq); + status = scic_sds_remote_node_context_start_io(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; @@ -511,11 +511,11 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic enum scic_sds_remote_device_states new_state; struct sas_task *task = isci_request_access_task(ireq); - status = scic_sds_port_start_io(iport, sci_dev, ireq); + status = scic_sds_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, ireq); + status = scic_sds_remote_node_context_start_io(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; @@ -526,7 +526,7 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic if (task->ata_task.use_ncq) new_state = SCI_STP_DEV_NCQ; else { - sci_dev->working_request = ireq; + idev->working_request = ireq; new_state = SCI_STP_DEV_CMD; } sci_change_state(sm, new_state); @@ -536,11 +536,11 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic struct sas_task *task = isci_request_access_task(ireq); if (task->ata_task.use_ncq) { - status = scic_sds_port_start_io(iport, sci_dev, ireq); + status = scic_sds_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, ireq); + status = scic_sds_remote_node_context_start_io(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; @@ -552,11 +552,11 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic case SCI_STP_DEV_AWAIT_RESET: return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; case SCI_SMP_DEV_IDLE: - status = scic_sds_port_start_io(iport, sci_dev, ireq); + status = scic_sds_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, ireq); + status = scic_sds_remote_node_context_start_io(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; @@ -564,8 +564,8 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic if (status != SCI_SUCCESS) break; - sci_dev->working_request = ireq; - sci_change_state(&sci_dev->sm, SCI_SMP_DEV_CMD); + idev->working_request = ireq; + sci_change_state(&idev->sm, SCI_SMP_DEV_CMD); break; case SCI_STP_DEV_CMD: case SCI_SMP_DEV_CMD: @@ -575,12 +575,12 @@ enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic return SCI_FAILURE_INVALID_STATE; } - scic_sds_remote_device_start_request(sci_dev, ireq, status); + scic_sds_remote_device_start_request(idev, ireq, status); return status; } static enum sci_status common_complete_io(struct isci_port *iport, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; @@ -589,21 +589,21 @@ static enum sci_status common_complete_io(struct isci_port *iport, if (status != SCI_SUCCESS) return status; - status = scic_sds_port_complete_io(iport, sci_dev, ireq); + status = scic_sds_port_complete_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - scic_sds_remote_device_decrement_request_count(sci_dev); + scic_sds_remote_device_decrement_request_count(idev); return status; } enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct isci_port *iport = sci_dev->owning_port; + struct isci_port *iport = idev->owning_port; enum sci_status status; switch (state) { @@ -615,18 +615,18 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s case SCI_DEV_FAILED: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_READY: case SCI_STP_DEV_AWAIT_RESET: case SCI_DEV_RESETTING: - status = common_complete_io(iport, sci_dev, ireq); + status = common_complete_io(iport, idev, ireq); break; case SCI_STP_DEV_CMD: case SCI_STP_DEV_NCQ: case SCI_STP_DEV_NCQ_ERROR: - status = common_complete_io(iport, sci_dev, ireq); + status = common_complete_io(iport, idev, ireq); if (status != SCI_SUCCESS) break; @@ -637,54 +637,54 @@ enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *s * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ sci_change_state(sm, SCI_STP_DEV_AWAIT_RESET); - } else if (scic_sds_remote_device_get_request_count(sci_dev) == 0) + } else if (scic_sds_remote_device_get_request_count(idev) == 0) sci_change_state(sm, SCI_STP_DEV_IDLE); break; case SCI_SMP_DEV_CMD: - status = common_complete_io(iport, sci_dev, ireq); + status = common_complete_io(iport, idev, ireq); if (status != SCI_SUCCESS) break; sci_change_state(sm, SCI_SMP_DEV_IDLE); break; case SCI_DEV_STOPPING: - status = common_complete_io(iport, sci_dev, ireq); + status = common_complete_io(iport, idev, ireq); if (status != SCI_SUCCESS) break; - if (scic_sds_remote_device_get_request_count(sci_dev) == 0) - scic_sds_remote_node_context_destruct(&sci_dev->rnc, + if (scic_sds_remote_device_get_request_count(idev) == 0) + scic_sds_remote_node_context_destruct(&idev->rnc, rnc_destruct_done, - sci_dev); + idev); break; } if (status != SCI_SUCCESS) - dev_err(scirdev_to_dev(sci_dev), + dev_err(scirdev_to_dev(idev), "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " "could not complete\n", __func__, iport, - sci_dev, ireq, status); + idev, ireq, status); else - isci_put_device(sci_dev_to_idev(sci_dev)); + isci_put_device(idev); return status; } static void scic_sds_remote_device_continue_request(void *dev) { - struct scic_sds_remote_device *sci_dev = dev; + struct isci_remote_device *idev = dev; /* we need to check if this request is still valid to continue. */ - if (sci_dev->working_request) - scic_controller_continue_io(sci_dev->working_request); + if (idev->working_request) + scic_controller_continue_io(idev->working_request); } enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct isci_port *iport = sci_dev->owning_port; + struct isci_port *iport = idev->owning_port; enum sci_status status; switch (state) { @@ -698,7 +698,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc case SCI_DEV_RESETTING: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_STP_DEV_IDLE: @@ -706,11 +706,11 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc case SCI_STP_DEV_NCQ: case SCI_STP_DEV_NCQ_ERROR: case SCI_STP_DEV_AWAIT_RESET: - status = scic_sds_port_start_io(iport, sci_dev, ireq); + status = scic_sds_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_task(&sci_dev->rnc, ireq); + status = scic_sds_remote_node_context_start_task(&idev->rnc, ireq); if (status != SCI_SUCCESS) goto out; @@ -722,7 +722,7 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc * replace the request that probably resulted in the task * management request. */ - sci_dev->working_request = ireq; + idev->working_request = ireq; sci_change_state(sm, SCI_STP_DEV_CMD); /* The remote node context must cleanup the TCi to NCQ mapping @@ -732,32 +732,32 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc * the correct action when the remote node context is suspended * and later resumed. */ - scic_sds_remote_node_context_suspend(&sci_dev->rnc, + scic_sds_remote_node_context_suspend(&idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); - scic_sds_remote_node_context_resume(&sci_dev->rnc, + scic_sds_remote_node_context_resume(&idev->rnc, scic_sds_remote_device_continue_request, - sci_dev); + idev); out: - scic_sds_remote_device_start_request(sci_dev, ireq, status); + scic_sds_remote_device_start_request(idev, ireq, status); /* We need to let the controller start request handler know that * it can't post TC yet. We will provide a callback function to * post TC when RNC gets resumed. */ return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; case SCI_DEV_READY: - status = scic_sds_port_start_io(iport, sci_dev, ireq); + status = scic_sds_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_task(&sci_dev->rnc, ireq); + status = scic_sds_remote_node_context_start_task(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; status = scic_sds_request_start(ireq); break; } - scic_sds_remote_device_start_request(sci_dev, ireq, status); + scic_sds_remote_device_start_request(idev, ireq, status); return status; } @@ -771,15 +771,15 @@ enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *sc * request and then requests the controller to post the request. none */ void scic_sds_remote_device_post_request( - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u32 request) { u32 context; - context = scic_sds_remote_device_build_command_context(sci_dev, request); + context = scic_sds_remote_device_build_command_context(idev, request); scic_sds_controller_post_request( - scic_sds_remote_device_get_controller(sci_dev), + scic_sds_remote_device_get_controller(idev), context ); } @@ -790,34 +790,33 @@ void scic_sds_remote_device_post_request( */ static void remote_device_resume_done(void *_dev) { - struct scic_sds_remote_device *sci_dev = _dev; + struct isci_remote_device *idev = _dev; - if (is_remote_device_ready(sci_dev)) + if (is_remote_device_ready(idev)) return; /* go 'ready' if we are not already in a ready state */ - sci_change_state(&sci_dev->sm, SCI_DEV_READY); + sci_change_state(&idev->sm, SCI_DEV_READY); } static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) { - struct scic_sds_remote_device *sci_dev = _dev; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); - struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; + struct isci_remote_device *idev = _dev; + struct scic_sds_controller *scic = idev->owning_port->owning_controller; /* For NCQ operation we do not issue a isci_remote_device_not_ready(). * As a result, avoid sending the ready notification. */ - if (sci_dev->sm.previous_state_id != SCI_STP_DEV_NCQ) + if (idev->sm.previous_state_id != SCI_STP_DEV_NCQ) isci_remote_device_ready(scic_to_ihost(scic), idev); } static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); /* Initial state is a transitional state to the stopped state */ - sci_change_state(&sci_dev->sm, SCI_DEV_STOPPED); + sci_change_state(&idev->sm, SCI_DEV_STOPPED); } /** @@ -833,22 +832,22 @@ static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_mac * device isn't valid (e.g. it's already been destoryed, the handle isn't * valid, etc.). */ -static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device *sci_dev) +static enum sci_status scic_remote_device_destruct(struct isci_remote_device *idev) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; struct scic_sds_controller *scic; if (state != SCI_DEV_STOPPED) { - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - scic = sci_dev->owning_port->owning_controller; - scic_sds_controller_free_remote_node_context(scic, sci_dev, - sci_dev->rnc.remote_node_index); - sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + scic = idev->owning_port->owning_controller; + scic_sds_controller_free_remote_node_context(scic, idev, + idev->rnc.remote_node_index); + idev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; sci_change_state(sm, SCI_DEV_FINAL); return SCI_SUCCESS; @@ -871,34 +870,32 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ * io requests in process */ BUG_ON(!list_empty(&idev->reqs_in_process)); - scic_remote_device_destruct(&idev->sci); + scic_remote_device_destruct(idev); list_del_init(&idev->node); isci_put_device(idev); } static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); - struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct scic_sds_controller *scic = idev->owning_port->owning_controller; u32 prev_state; /* If we are entering from the stopping state let the SCI User know that * the stop operation has completed. */ - prev_state = sci_dev->sm.previous_state_id; + prev_state = idev->sm.previous_state_id; if (prev_state == SCI_DEV_STOPPING) isci_remote_device_deconstruct(scic_to_ihost(scic), idev); - scic_sds_controller_remote_device_stopped(scic, sci_dev); + scic_sds_controller_remote_device_stopped(scic, idev); } static void scic_sds_remote_device_starting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); struct isci_host *ihost = scic_to_ihost(scic); - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); @@ -906,27 +903,25 @@ static void scic_sds_remote_device_starting_state_enter(struct sci_base_state_ma static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); - struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct scic_sds_controller *scic = idev->owning_port->owning_controller; struct domain_device *dev = idev->domain_dev; if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { - sci_change_state(&sci_dev->sm, SCI_STP_DEV_IDLE); + sci_change_state(&idev->sm, SCI_STP_DEV_IDLE); } else if (dev_is_expander(dev)) { - sci_change_state(&sci_dev->sm, SCI_SMP_DEV_IDLE); + sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE); } else isci_remote_device_ready(scic_to_ihost(scic), idev); } static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct domain_device *dev = idev->domain_dev; if (dev->dev_type == SAS_END_DEV) { - struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller; - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); + struct scic_sds_controller *scic = idev->owning_port->owning_controller; isci_remote_device_not_ready(scic_to_ihost(scic), idev, SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); @@ -935,82 +930,81 @@ static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machin static void scic_sds_remote_device_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); scic_sds_remote_node_context_suspend( - &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); + &idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); } static void scic_sds_remote_device_resetting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); + scic_sds_remote_node_context_resume(&idev->rnc, NULL, NULL); } static void scic_sds_stp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - sci_dev->working_request = NULL; - if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) { + idev->working_request = NULL; + if (scic_sds_remote_node_context_is_ready(&idev->rnc)) { /* * Since the RNC is ready, it's alright to finish completion * processing (e.g. signal the remote device is ready). */ - scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(sci_dev); + scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(idev); } else { - scic_sds_remote_node_context_resume(&sci_dev->rnc, + scic_sds_remote_node_context_resume(&idev->rnc, scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, - sci_dev); + idev); } } static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); - BUG_ON(sci_dev->working_request == NULL); + BUG_ON(idev->working_request == NULL); - isci_remote_device_not_ready(scic_to_ihost(scic), sci_dev_to_idev(sci_dev), + isci_remote_device_not_ready(scic_to_ihost(scic), idev, SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_remote_device *idev = sci_dev_to_idev(sci_dev); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); - if (sci_dev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) + if (idev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) isci_remote_device_not_ready(scic_to_ihost(scic), idev, - sci_dev->not_ready_reason); + idev->not_ready_reason); } static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); - isci_remote_device_ready(scic_to_ihost(scic), sci_dev_to_idev(sci_dev)); + isci_remote_device_ready(scic_to_ihost(scic), idev); } static void scic_sds_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); - BUG_ON(sci_dev->working_request == NULL); + BUG_ON(idev->working_request == NULL); - isci_remote_device_not_ready(scic_to_ihost(scic), sci_dev_to_idev(sci_dev), + isci_remote_device_not_ready(scic_to_ihost(scic), idev, SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_state_machine *sm) { - struct scic_sds_remote_device *sci_dev = container_of(sm, typeof(*sci_dev), sm); + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - sci_dev->working_request = NULL; + idev->working_request = NULL; } static const struct sci_base_state scic_sds_remote_device_state_table[] = { @@ -1065,14 +1059,14 @@ static const struct sci_base_state scic_sds_remote_device_state_table[] = { * frees the remote_node_context(s) for the device. */ static void scic_remote_device_construct(struct isci_port *iport, - struct scic_sds_remote_device *sci_dev) + struct isci_remote_device *idev) { - sci_dev->owning_port = iport; - sci_dev->started_request_count = 0; + idev->owning_port = iport; + idev->started_request_count = 0; - sci_init_sm(&sci_dev->sm, scic_sds_remote_device_state_table, SCI_DEV_INITIAL); + sci_init_sm(&idev->sm, scic_sds_remote_device_state_table, SCI_DEV_INITIAL); - scic_sds_remote_node_context_construct(&sci_dev->rnc, + scic_sds_remote_node_context_construct(&idev->rnc, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } @@ -1091,21 +1085,21 @@ static void scic_remote_device_construct(struct isci_port *iport, * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ static enum sci_status scic_remote_device_da_construct(struct isci_port *iport, - struct scic_sds_remote_device *sci_dev) + struct isci_remote_device *idev) { enum sci_status status; - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct domain_device *dev = idev->domain_dev; - scic_remote_device_construct(iport, sci_dev); + scic_remote_device_construct(iport, idev); /* * This information is request to determine how many remote node context * entries will be needed to store the remote node. */ - sci_dev->is_direct_attached = true; + idev->is_direct_attached = true; status = scic_sds_controller_allocate_remote_node_context(iport->owning_controller, - sci_dev, - &sci_dev->rnc.remote_node_index); + idev, + &idev->rnc.remote_node_index); if (status != SCI_SUCCESS) return status; @@ -1116,10 +1110,10 @@ static enum sci_status scic_remote_device_da_construct(struct isci_port *iport, else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; - sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(iport); + idev->connection_rate = scic_sds_port_get_max_allowed_speed(iport); /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; + idev->device_port_width = 1; return SCI_SUCCESS; } @@ -1137,16 +1131,16 @@ static enum sci_status scic_remote_device_da_construct(struct isci_port *iport, * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ static enum sci_status scic_remote_device_ea_construct(struct isci_port *iport, - struct scic_sds_remote_device *sci_dev) + struct isci_remote_device *idev) { - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct domain_device *dev = idev->domain_dev; enum sci_status status; - scic_remote_device_construct(iport, sci_dev); + scic_remote_device_construct(iport, idev); status = scic_sds_controller_allocate_remote_node_context(iport->owning_controller, - sci_dev, - &sci_dev->rnc.remote_node_index); + idev, + &idev->rnc.remote_node_index); if (status != SCI_SUCCESS) return status; @@ -1163,11 +1157,11 @@ static enum sci_status scic_remote_device_ea_construct(struct isci_port *iport, * connection the logical link rate is that same as the * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay * one another, so this code works for both situations. */ - sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(iport), + idev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(iport), dev->linkrate); /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; + idev->device_port_width = 1; return SCI_SUCCESS; } @@ -1185,22 +1179,22 @@ static enum sci_status scic_remote_device_ea_construct(struct isci_port *iport, * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start * the device when there have been no phys added to it. */ -static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *sci_dev, +static enum sci_status scic_remote_device_start(struct isci_remote_device *idev, u32 timeout) { - struct sci_base_state_machine *sm = &sci_dev->sm; + struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; enum sci_status status; if (state != SCI_DEV_STOPPED) { - dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n", + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; } - status = scic_sds_remote_node_context_resume(&sci_dev->rnc, + status = scic_sds_remote_node_context_resume(&idev->rnc, remote_device_resume_done, - sci_dev); + idev); if (status != SCI_SUCCESS) return status; @@ -1217,9 +1211,9 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport, enum sci_status status; if (dev->parent && dev_is_expander(dev->parent)) - status = scic_remote_device_ea_construct(iport, &idev->sci); + status = scic_remote_device_ea_construct(iport, idev); else - status = scic_remote_device_da_construct(iport, &idev->sci); + status = scic_remote_device_da_construct(iport, idev); if (status != SCI_SUCCESS) { dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n", @@ -1229,7 +1223,7 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport, } /* start the device. */ - status = scic_remote_device_start(&idev->sci, ISCI_REMOTE_DEVICE_START_TIMEOUT); + status = scic_remote_device_start(idev, ISCI_REMOTE_DEVICE_START_TIMEOUT); if (status != SCI_SUCCESS) dev_warn(&ihost->pdev->dev, "remote device start failed: %d\n", @@ -1330,7 +1324,7 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem set_bit(IDEV_STOP_PENDING, &idev->flags); spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_stop(&idev->sci, 50); + status = scic_remote_device_stop(idev, 50); spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the stop complete callback. */ diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 578d75b..4579858 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -70,65 +70,14 @@ enum scic_remote_device_not_ready_reason_code { SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX }; -struct scic_sds_remote_device { - /** - * This field contains the information for the base remote device state - * machine. - */ - struct sci_base_state_machine sm; - - /** - * This field is the programmed device port width. This value is - * written to the RCN data structure to tell the SCU how many open - * connections this device can have. - */ - u32 device_port_width; - - /** - * This field is the programmed connection rate for this remote device. It is - * used to program the TC with the maximum allowed connection rate. - */ - enum sas_linkrate connection_rate; - - /** - * This filed is assinged the value of true if the device is directly - * attached to the port. - */ - bool is_direct_attached; - - /** - * This filed contains a pointer back to the port to which this device - * is assigned. - */ - struct isci_port *owning_port; - - /** - * This field contains the SCU silicon remote node context specific - * information. - */ - struct scic_sds_remote_node_context rnc; - - /** - * This field contains the stated request count for the remote device. The - * device can not reach the SCI_DEV_STOPPED until all - * requests are complete and the rnc_posted value is false. - */ - u32 started_request_count; - - /** - * This field contains a pointer to the working request object. It is only - * used only for SATA requests since the unsolicited frames we get from the - * hardware have no Tag value to look up the io request object. - */ - struct isci_request *working_request; - - /** - * This field contains the reason for the remote device going not_ready. It is - * assigned in the state handlers and used in the state transition. - */ - u32 not_ready_reason; -}; - +/** + * isci_remote_device - isci representation of a sas expander / end point + * @device_port_width: hw setting for number of simultaneous connections + * @connection_rate: per-taskcontext connection rate for this device + * @working_request: SATA requests have no tag we for unaccelerated + * protocols we need a method to associate unsolicited + * frames with a pending request + */ struct isci_remote_device { #define IDEV_START_PENDING 0 #define IDEV_STOP_PENDING 1 @@ -143,7 +92,16 @@ struct isci_remote_device { struct domain_device *domain_dev; struct list_head node; struct list_head reqs_in_process; - struct scic_sds_remote_device sci; + struct sci_base_state_machine sm; + u32 device_port_width; + enum sas_linkrate connection_rate; + bool is_direct_attached; + struct isci_port *owning_port; + struct scic_sds_remote_node_context rnc; + /* XXX unify with device reference counting and delete */ + u32 started_request_count; + struct isci_request *working_request; + u32 not_ready_reason; }; #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 @@ -191,7 +149,7 @@ void isci_device_clear_reset_pending(struct isci_host *ihost, * successfully stopped. */ enum sci_status scic_remote_device_stop( - struct scic_sds_remote_device *remote_device, + struct isci_remote_device *idev, u32 timeout); /** @@ -207,7 +165,7 @@ enum sci_status scic_remote_device_stop( * started. */ enum sci_status scic_remote_device_reset( - struct scic_sds_remote_device *remote_device); + struct isci_remote_device *idev); /** * scic_remote_device_reset_complete() - This method informs the device object @@ -220,7 +178,7 @@ enum sci_status scic_remote_device_reset( * is resuming operation. */ enum sci_status scic_remote_device_reset_complete( - struct scic_sds_remote_device *remote_device); + struct isci_remote_device *idev); #define scic_remote_device_is_atapi(device_handle) false @@ -335,27 +293,15 @@ enum scic_sds_remote_device_states { SCI_DEV_FINAL, }; -static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) +static inline struct isci_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) { - struct scic_sds_remote_device *sci_dev; + struct isci_remote_device *idev; - sci_dev = container_of(rnc, typeof(*sci_dev), rnc); - - return sci_dev; -} - -static inline struct isci_remote_device *sci_dev_to_idev(struct scic_sds_remote_device *sci_dev) -{ - struct isci_remote_device *idev = container_of(sci_dev, typeof(*idev), sci); + idev = container_of(rnc, typeof(*idev), rnc); return idev; } -static inline struct domain_device *sci_dev_to_domain(struct scic_sds_remote_device *sci_dev) -{ - return sci_dev_to_idev(sci_dev)->domain_dev; -} - static inline bool dev_is_expander(struct domain_device *dev) { return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; @@ -366,8 +312,8 @@ static inline bool dev_is_expander(struct domain_device *dev) * * This macro incrments the request count for this device */ -#define scic_sds_remote_device_increment_request_count(sci_dev) \ - ((sci_dev)->started_request_count++) +#define scic_sds_remote_device_increment_request_count(idev) \ + ((idev)->started_request_count++) /** * scic_sds_remote_device_decrement_request_count() - @@ -375,44 +321,44 @@ static inline bool dev_is_expander(struct domain_device *dev) * This macro decrements the request count for this device. This count will * never decrment past 0. */ -#define scic_sds_remote_device_decrement_request_count(sci_dev) \ - ((sci_dev)->started_request_count > 0 ? \ - (sci_dev)->started_request_count-- : 0) +#define scic_sds_remote_device_decrement_request_count(idev) \ + ((idev)->started_request_count > 0 ? \ + (idev)->started_request_count-- : 0) /** * scic_sds_remote_device_get_request_count() - * * This is a helper macro to return the current device request count. */ -#define scic_sds_remote_device_get_request_count(sci_dev) \ - ((sci_dev)->started_request_count) +#define scic_sds_remote_device_get_request_count(idev) \ + ((idev)->started_request_count) /** * scic_sds_remote_device_get_controller() - * * This macro returns the controller object that contains this device object */ -#define scic_sds_remote_device_get_controller(sci_dev) \ - scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev)) +#define scic_sds_remote_device_get_controller(idev) \ + scic_sds_port_get_controller(scic_sds_remote_device_get_port(idev)) /** * scic_sds_remote_device_get_port() - * * This macro returns the owning port of this device */ -#define scic_sds_remote_device_get_port(sci_dev) \ - ((sci_dev)->owning_port) +#define scic_sds_remote_device_get_port(idev) \ + ((idev)->owning_port) /** * scic_sds_remote_device_get_controller_peg() - * * This macro returns the controllers protocol engine group */ -#define scic_sds_remote_device_get_controller_peg(sci_dev) \ +#define scic_sds_remote_device_get_controller_peg(idev) \ (\ scic_sds_controller_get_protocol_engine_group(\ scic_sds_port_get_controller(\ - scic_sds_remote_device_get_port(sci_dev) \ + scic_sds_remote_device_get_port(idev) \ ) \ ) \ ) @@ -422,8 +368,8 @@ static inline bool dev_is_expander(struct domain_device *dev) * * This macro returns the remote node index for this device object */ -#define scic_sds_remote_device_get_index(sci_dev) \ - ((sci_dev)->rnc.remote_node_index) +#define scic_sds_remote_device_get_index(idev) \ + ((idev)->rnc.remote_node_index) /** * scic_sds_remote_device_build_command_context() - @@ -448,36 +394,36 @@ static inline bool dev_is_expander(struct domain_device *dev) ((device)->working_request = (request)) enum sci_status scic_sds_remote_device_frame_handler( - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u32 frame_index); enum sci_status scic_sds_remote_device_event_handler( - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u32 event_code); enum sci_status scic_sds_remote_device_start_io( struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_sds_remote_device_start_task( struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_sds_remote_device_complete_io( struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_sds_remote_device_suspend( - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u32 suspend_type); void scic_sds_remote_device_post_request( - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u32 request); -#define scic_sds_remote_device_is_atapi(sci_dev) false +#define scic_sds_remote_device_is_atapi(idev) false #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 1b51fe5..e485744 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -103,22 +103,22 @@ bool scic_sds_remote_node_context_is_ready( static void scic_sds_remote_node_context_construct_buffer( struct scic_sds_remote_node_context *sci_rnc) { - struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; int rni = sci_rnc->remote_node_index; union scu_remote_node_context *rnc; struct scic_sds_controller *scic; __le64 sas_addr; - scic = scic_sds_remote_device_get_controller(sci_dev); + scic = scic_sds_remote_device_get_controller(idev); rnc = scic_sds_controller_get_remote_node_context_buffer(scic, rni); memset(rnc, 0, sizeof(union scu_remote_node_context) - * scic_sds_remote_device_node_count(sci_dev)); + * scic_sds_remote_device_node_count(idev)); rnc->ssp.remote_node_index = rni; - rnc->ssp.remote_node_port_width = sci_dev->device_port_width; - rnc->ssp.logical_port_index = sci_dev->owning_port->physical_port_index; + rnc->ssp.remote_node_port_width = idev->device_port_width; + rnc->ssp.logical_port_index = idev->owning_port->physical_port_index; /* sas address is __be64, context ram format is __le64 */ sas_addr = cpu_to_le64(SAS_ADDR(dev->sas_addr)); @@ -148,7 +148,7 @@ static void scic_sds_remote_node_context_construct_buffer( rnc->ssp.initial_arbitration_wait_time = 0; /* Open Address Frame Parameters */ - rnc->ssp.oaf_connection_rate = sci_dev->connection_rate; + rnc->ssp.oaf_connection_rate = idev->connection_rate; rnc->ssp.oaf_features = 0; rnc->ssp.oaf_source_zone_group = 0; rnc->ssp.oaf_more_compatibility_features = 0; @@ -220,26 +220,26 @@ static void scic_sds_remote_node_context_continue_state_transitions(struct scic_ static void scic_sds_remote_node_context_validate_context_buffer( struct scic_sds_remote_node_context *sci_rnc) { - struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; union scu_remote_node_context *rnc_buffer; rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(sci_dev), + scic_sds_remote_device_get_controller(idev), sci_rnc->remote_node_index ); rnc_buffer->ssp.is_valid = true; - if (!sci_dev->is_direct_attached && + if (!idev->is_direct_attached && (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) { - scic_sds_remote_device_post_request(sci_dev, + scic_sds_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_96); } else { - scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_32); + scic_sds_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_32); - if (sci_dev->is_direct_attached) { - scic_sds_port_setup_transports(sci_dev->owning_port, + if (idev->is_direct_attached) { + scic_sds_port_setup_transports(idev->owning_port, sci_rnc->remote_node_index); } } @@ -296,11 +296,11 @@ static void scic_sds_remote_node_context_invalidating_state_enter(struct sci_bas static void scic_sds_remote_node_context_resuming_state_enter(struct sci_base_state_machine *sm) { struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); - struct scic_sds_remote_device *sci_dev; + struct isci_remote_device *idev; struct domain_device *dev; - sci_dev = rnc_to_dev(rnc); - dev = sci_dev_to_domain(sci_dev); + idev = rnc_to_dev(rnc); + dev = idev->domain_dev; /* * For direct attached SATA devices we need to clear the TLCR @@ -309,11 +309,11 @@ static void scic_sds_remote_node_context_resuming_state_enter(struct sci_base_st * the STPTLDARNI register with the RNi of the device */ if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && - sci_dev->is_direct_attached) - scic_sds_port_setup_transports(sci_dev->owning_port, + idev->is_direct_attached) + scic_sds_port_setup_transports(idev->owning_port, rnc->remote_node_index); - scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); + scic_sds_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); } static void scic_sds_remote_node_context_ready_state_enter(struct sci_base_state_machine *sm) @@ -564,8 +564,8 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ sci_rnc->user_cookie = cb_p; return SCI_SUCCESS; case SCI_RNC_TX_SUSPENDED: { - struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc); - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); @@ -573,7 +573,7 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { - if (sci_dev->is_direct_attached) { + if (idev->is_direct_attached) { /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); } else { diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index 35e6ae6..7a24c7a 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -79,7 +79,7 @@ #define SCI_SOFTWARE_SUSPENSION (1) struct isci_request; -struct scic_sds_remote_device; +struct isci_remote_device; struct scic_sds_remote_node_context; typedef void (*scics_sds_remote_node_context_callback)(void *); diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 2d29abf..90ead66 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -209,17 +209,17 @@ static void scu_ssp_reqeust_construct_task_context( struct scu_task_context *task_context) { dma_addr_t dma_addr; - struct scic_sds_remote_device *target_device; + struct isci_remote_device *idev; struct isci_port *iport; - target_device = scic_sds_request_get_device(ireq); + idev = scic_sds_request_get_device(ireq); iport = scic_sds_request_get_port(ireq); /* Fill in the TC with the its required data */ task_context->abort = 0; task_context->priority = 0; task_context->initiator_request = 1; - task_context->connection_rate = target_device->connection_rate; + task_context->connection_rate = idev->connection_rate; task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = scic_sds_port_get_index(iport); @@ -227,8 +227,7 @@ static void scu_ssp_reqeust_construct_task_context( task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; - task_context->remote_node_index = - scic_sds_remote_device_get_index(ireq->target_device); + task_context->remote_node_index = scic_sds_remote_device_get_index(idev); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -348,17 +347,17 @@ static void scu_sata_reqeust_construct_task_context( struct scu_task_context *task_context) { dma_addr_t dma_addr; - struct scic_sds_remote_device *target_device; + struct isci_remote_device *idev; struct isci_port *iport; - target_device = scic_sds_request_get_device(ireq); + idev = scic_sds_request_get_device(ireq); iport = scic_sds_request_get_port(ireq); /* Fill in the TC with the its required data */ task_context->abort = 0; task_context->priority = SCU_TASK_PRIORITY_NORMAL; task_context->initiator_request = 1; - task_context->connection_rate = target_device->connection_rate; + task_context->connection_rate = idev->connection_rate; task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(controller); task_context->logical_port_index = @@ -367,8 +366,7 @@ static void scu_sata_reqeust_construct_task_context( task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; - task_context->remote_node_index = - scic_sds_remote_device_get_index(ireq->target_device); + task_context->remote_node_index = scic_sds_remote_device_get_index(idev); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -2850,7 +2848,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - struct domain_device *dev = sci_dev_to_domain(ireq->target_device); + struct domain_device *dev = ireq->target_device->domain_dev; struct sas_task *task; /* XXX as hch said always creating an internal sas_task for tmf @@ -2988,12 +2986,12 @@ static const struct sci_base_state scic_sds_request_state_table[] = { static void scic_sds_general_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq) { sci_init_sm(&ireq->sm, scic_sds_request_state_table, SCI_REQ_INIT); - ireq->target_device = sci_dev; + ireq->target_device = idev; ireq->protocol = SCIC_NO_PROTOCOL; ireq->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; @@ -3004,16 +3002,16 @@ scic_sds_general_request_construct(struct scic_sds_controller *scic, static enum sci_status scic_io_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, struct isci_request *ireq) { - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct domain_device *dev = idev->domain_dev; enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, ireq); + scic_sds_general_request_construct(scic, idev, ireq); - if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; if (dev->dev_type == SAS_END_DEV) @@ -3031,14 +3029,14 @@ scic_io_request_construct(struct scic_sds_controller *scic, } enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u16 io_tag, struct isci_request *ireq) { - struct domain_device *dev = sci_dev_to_domain(sci_dev); + struct domain_device *dev = idev->domain_dev; enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, sci_dev, ireq); + scic_sds_general_request_construct(scic, idev, ireq); if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { @@ -3102,7 +3100,7 @@ scic_io_request_construct_smp(struct device *dev, struct sas_task *task) { struct scatterlist *sg = &task->smp_task.smp_req; - struct scic_sds_remote_device *sci_dev; + struct isci_remote_device *idev; struct scu_task_context *task_context; struct isci_port *iport; struct smp_req *smp_req; @@ -3147,7 +3145,7 @@ scic_io_request_construct_smp(struct device *dev, task_context = ireq->tc; - sci_dev = scic_sds_request_get_device(ireq); + idev = scic_sds_request_get_device(ireq); iport = scic_sds_request_get_port(ireq); /* @@ -3156,7 +3154,7 @@ scic_io_request_construct_smp(struct device *dev, */ task_context->priority = 0; task_context->initiator_request = 1; - task_context->connection_rate = sci_dev->connection_rate; + task_context->connection_rate = idev->connection_rate; task_context->protocol_engine_index = scic_sds_controller_get_protocol_engine_group(scic); task_context->logical_port_index = scic_sds_port_get_index(iport); @@ -3166,7 +3164,7 @@ scic_io_request_construct_smp(struct device *dev, task_context->context_type = SCU_TASK_CONTEXT_TYPE; /* 04h */ - task_context->remote_node_index = sci_dev->rnc.remote_node_index; + task_context->remote_node_index = idev->rnc.remote_node_index; task_context->command_code = 0; task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; @@ -3257,17 +3255,16 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) */ static enum sci_status isci_io_request_build(struct isci_host *isci_host, struct isci_request *request, - struct isci_remote_device *isci_device) + struct isci_remote_device *idev) { enum sci_status status = SCI_SUCCESS; struct sas_task *task = isci_request_access_task(request); - struct scic_sds_remote_device *sci_device = &isci_device->sci; dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = 0x%p; request = %p, " + "%s: idev = 0x%p; request = %p, " "num_scatter = %d\n", __func__, - isci_device, + idev, request, task->num_scatter); @@ -3290,8 +3287,7 @@ static enum sci_status isci_io_request_build(struct isci_host *isci_host, return SCI_FAILURE_INSUFFICIENT_RESOURCES; } - status = scic_io_request_construct(&isci_host->sci, sci_device, - request); + status = scic_io_request_construct(&isci_host->sci, idev, request); if (status != SCI_SUCCESS) { dev_warn(&isci_host->pdev->dev, @@ -3397,14 +3393,14 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide * ireq->is_task_management_request is false). */ status = scic_controller_start_task(&ihost->sci, - &idev->sci, + idev, ireq); } else { status = SCI_FAILURE; } } else { /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io(&ihost->sci, &idev->sci, + status = scic_controller_start_io(&ihost->sci, idev, ireq); } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 68d8a27..ca64ea2 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -146,7 +146,7 @@ struct isci_request { struct completion *io_request_completion; struct sci_base_state_machine sm; struct scic_sds_controller *owning_controller; - struct scic_sds_remote_device *target_device; + struct isci_remote_device *target_device; u16 io_tag; enum sci_request_protocol protocol; u32 scu_status; /* hardware result */ @@ -501,7 +501,7 @@ void isci_terminate_pending_requests(struct isci_host *ihost, struct isci_remote_device *idev); enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, - struct scic_sds_remote_device *sci_dev, + struct isci_remote_device *idev, u16 io_tag, struct isci_request *ireq); enum sci_status diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 700708c..89b01ee 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -257,7 +257,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return NULL; /* let the core do it's construct. */ - status = scic_task_request_construct(&ihost->sci, &idev->sci, tag, + status = scic_task_request_construct(&ihost->sci, idev, tag, ireq); if (status != SCI_SUCCESS) { @@ -288,12 +288,11 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, } int isci_task_execute_tmf(struct isci_host *ihost, - struct isci_remote_device *isci_device, + struct isci_remote_device *idev, struct isci_tmf *tmf, unsigned long timeout_ms) { DECLARE_COMPLETION_ONSTACK(completion); enum sci_task_status status = SCI_TASK_FAILURE; - struct scic_sds_remote_device *sci_device; struct isci_request *ireq; int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; @@ -310,34 +309,30 @@ int isci_task_execute_tmf(struct isci_host *ihost, /* sanity check, return TMF_RESP_FUNC_FAILED * if the device is not there and ready. */ - if (!isci_device || - (!test_bit(IDEV_IO_READY, &isci_device->flags) && - !test_bit(IDEV_IO_NCQERROR, &isci_device->flags))) { + if (!idev || + (!test_bit(IDEV_IO_READY, &idev->flags) && + !test_bit(IDEV_IO_NCQERROR, &idev->flags))) { dev_dbg(&ihost->pdev->dev, - "%s: isci_device = %p not ready (%#lx)\n", + "%s: idev = %p not ready (%#lx)\n", __func__, - isci_device, isci_device ? isci_device->flags : 0); + idev, idev ? idev->flags : 0); goto err_tci; } else dev_dbg(&ihost->pdev->dev, - "%s: isci_device = %p\n", - __func__, isci_device); - - sci_device = &isci_device->sci; + "%s: idev = %p\n", + __func__, idev); /* Assign the pointer to the TMF's completion kernel wait structure. */ tmf->complete = &completion; - ireq = isci_task_request_build(ihost, isci_device, tag, tmf); + ireq = isci_task_request_build(ihost, idev, tag, tmf); if (!ireq) goto err_tci; spin_lock_irqsave(&ihost->scic_lock, flags); /* start the TMF io. */ - status = scic_controller_start_task(&ihost->sci, - sci_device, - ireq); + status = scic_controller_start_task(&ihost->sci, idev, ireq); if (status != SCI_TASK_SUCCESS) { dev_warn(&ihost->pdev->dev, @@ -355,7 +350,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, isci_request_change_state(ireq, started); /* add the request to the remote device request list. */ - list_add(&ireq->dev_node, &isci_device->reqs_in_process); + list_add(&ireq->dev_node, &idev->reqs_in_process); spin_unlock_irqrestore(&ihost->scic_lock, flags); @@ -370,7 +365,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); scic_controller_terminate_request(&ihost->sci, - &isci_device->sci, + idev, ireq); spin_unlock_irqrestore(&ihost->scic_lock, flags); @@ -520,13 +515,13 @@ static void isci_request_cleanup_completed_loiterer( * from a thread that can wait. Note that the request is terminated and * completed (back to the host, if started there). * @isci_host: This SCU. - * @isci_device: The target. + * @idev: The target. * @isci_request: The I/O request to be terminated. * */ static void isci_terminate_request_core( struct isci_host *isci_host, - struct isci_remote_device *isci_device, + struct isci_remote_device *idev, struct isci_request *isci_request) { enum sci_status status = SCI_SUCCESS; @@ -540,7 +535,7 @@ static void isci_terminate_request_core( dev_dbg(&isci_host->pdev->dev, "%s: device = %p; request = %p\n", - __func__, isci_device, isci_request); + __func__, idev, isci_request); spin_lock_irqsave(&isci_host->scic_lock, flags); @@ -564,7 +559,7 @@ static void isci_terminate_request_core( needs_cleanup_handling = true; status = scic_controller_terminate_request( &isci_host->sci, - &isci_device->sci, + idev, isci_request); } spin_unlock_irqrestore(&isci_host->scic_lock, flags); @@ -683,7 +678,7 @@ static void isci_terminate_request_core( } if (needs_cleanup_handling) isci_request_cleanup_completed_loiterer( - isci_host, isci_device, isci_request, task); + isci_host, idev, isci_request, task); } } @@ -694,7 +689,7 @@ static void isci_terminate_request_core( * called from a thread that can wait. Note that the requests are all * terminated and completed (back to the host, if started there). * @isci_host: This parameter specifies SCU. - * @isci_device: This parameter specifies the target. + * @idev: This parameter specifies the target. * */ void isci_terminate_pending_requests(struct isci_host *ihost, @@ -1521,7 +1516,7 @@ static int isci_reset_device(struct isci_host *ihost, dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_reset(&idev->sci); + status = scic_remote_device_reset(idev); if (status != SCI_SUCCESS) { spin_unlock_irqrestore(&ihost->scic_lock, flags); @@ -1547,7 +1542,7 @@ static int isci_reset_device(struct isci_host *ihost, /* Since all pending TCs have been cleaned, resume the RNC. */ spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_reset_complete(&idev->sci); + status = scic_remote_device_reset_complete(idev); spin_unlock_irqrestore(&ihost->scic_lock, flags); /* If this is a device on an expander, bring the phy back up. */ -- cgit v0.10.2 From d9dcb4ba791de2a06b19ac47cd61601cf3d4e208 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 30 Jun 2011 17:38:32 -0700 Subject: isci: unify isci_host and scic_sds_controller Remove the distinction between these two implementations and unify on isci_host (local instances named ihost). Hmmm, we had two 'oem_parameters' instances, one was unused... nice. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 45d7f71..bb298f8 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -181,35 +181,35 @@ void sci_change_state(struct sci_base_state_machine *sm, u32 next_state) } static bool scic_sds_controller_completion_queue_has_entries( - struct scic_sds_controller *scic) + struct isci_host *ihost) { - u32 get_value = scic->completion_queue_get; + u32 get_value = ihost->completion_queue_get; u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) == - COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index])) + COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index])) return true; return false; } -static bool scic_sds_controller_isr(struct scic_sds_controller *scic) +static bool scic_sds_controller_isr(struct isci_host *ihost) { - if (scic_sds_controller_completion_queue_has_entries(scic)) { + if (scic_sds_controller_completion_queue_has_entries(ihost)) { return true; } else { /* * we have a spurious interrupt it could be that we have already * emptied the completion queue from a previous interrupt */ - writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); /* * There is a race in the hardware that could cause us not to be notified * of an interrupt completion if we do not take this step. We will mask * then unmask the interrupts so if there is another interrupt pending * the clearing of the interrupt source we get the next interrupt message. */ - writel(0xFF000000, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); + writel(0xFF000000, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); } return false; @@ -219,18 +219,18 @@ irqreturn_t isci_msix_isr(int vec, void *data) { struct isci_host *ihost = data; - if (scic_sds_controller_isr(&ihost->sci)) + if (scic_sds_controller_isr(ihost)) tasklet_schedule(&ihost->completion_tasklet); return IRQ_HANDLED; } -static bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) +static bool scic_sds_controller_error_isr(struct isci_host *ihost) { u32 interrupt_status; interrupt_status = - readl(&scic->smu_registers->interrupt_status); + readl(&ihost->smu_registers->interrupt_status); interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); if (interrupt_status != 0) { @@ -246,28 +246,27 @@ static bool scic_sds_controller_error_isr(struct scic_sds_controller *scic) * then unmask the error interrupts so if there was another interrupt * pending we will be notified. * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ - writel(0xff, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); + writel(0xff, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); return false; } -static void scic_sds_controller_task_completion(struct scic_sds_controller *scic, +static void scic_sds_controller_task_completion(struct isci_host *ihost, u32 completion_entry) { u32 index = SCU_GET_COMPLETION_INDEX(completion_entry); - struct isci_host *ihost = scic_to_ihost(scic); struct isci_request *ireq = ihost->reqs[index]; /* Make sure that we really want to process this IO request */ if (test_bit(IREQ_ACTIVE, &ireq->flags) && ireq->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && - ISCI_TAG_SEQ(ireq->io_tag) == scic->io_request_sequence[index]) + ISCI_TAG_SEQ(ireq->io_tag) == ihost->io_request_sequence[index]) /* Yep this is a valid io request pass it along to the io request handler */ scic_sds_io_request_tc_completion(ireq, completion_entry); } -static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic, +static void scic_sds_controller_sdma_completion(struct isci_host *ihost, u32 completion_entry) { u32 index; @@ -279,8 +278,8 @@ static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic switch (scu_get_command_request_type(completion_entry)) { case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: - ireq = scic_to_ihost(scic)->reqs[index]; - dev_warn(scic_to_dev(scic), "%s: %x for io request %p\n", + ireq = ihost->reqs[index]; + dev_warn(&ihost->pdev->dev, "%s: %x for io request %p\n", __func__, completion_entry, ireq); /* @todo For a post TC operation we need to fail the IO * request @@ -289,27 +288,26 @@ static void scic_sds_controller_sdma_completion(struct scic_sds_controller *scic case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: - idev = scic->device_table[index]; - dev_warn(scic_to_dev(scic), "%s: %x for device %p\n", + idev = ihost->device_table[index]; + dev_warn(&ihost->pdev->dev, "%s: %x for device %p\n", __func__, completion_entry, idev); /* @todo For a port RNC operation we need to fail the * device */ break; default: - dev_warn(scic_to_dev(scic), "%s: unknown completion type %x\n", + dev_warn(&ihost->pdev->dev, "%s: unknown completion type %x\n", __func__, completion_entry); break; } } -static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *scic, +static void scic_sds_controller_unsolicited_frame(struct isci_host *ihost, u32 completion_entry) { u32 index; u32 frame_index; - struct isci_host *ihost = scic_to_ihost(scic); struct scu_unsolicited_frame_header *frame_header; struct isci_phy *iphy; struct isci_remote_device *idev; @@ -318,15 +316,15 @@ static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *sc frame_index = SCU_GET_FRAME_INDEX(completion_entry); - frame_header = scic->uf_control.buffers.array[frame_index].header; - scic->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; + frame_header = ihost->uf_control.buffers.array[frame_index].header; + ihost->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; if (SCU_GET_FRAME_ERROR(completion_entry)) { /* * / @todo If the IAF frame or SIGNATURE FIS frame has an error will * / this cause a problem? We expect the phy initialization will * / fail if there is an error in the frame. */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return; } @@ -347,15 +345,15 @@ static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *sc iphy = &ihost->phys[index]; result = scic_sds_phy_frame_handler(iphy, frame_index); } else { - if (index < scic->remote_node_entries) - idev = scic->device_table[index]; + if (index < ihost->remote_node_entries) + idev = ihost->device_table[index]; else idev = NULL; if (idev != NULL) result = scic_sds_remote_device_frame_handler(idev, frame_index); else - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); } } @@ -366,10 +364,9 @@ static void scic_sds_controller_unsolicited_frame(struct scic_sds_controller *sc } } -static void scic_sds_controller_event_completion(struct scic_sds_controller *scic, +static void scic_sds_controller_event_completion(struct isci_host *ihost, u32 completion_entry) { - struct isci_host *ihost = scic_to_ihost(scic); struct isci_remote_device *idev; struct isci_request *ireq; struct isci_phy *iphy; @@ -380,11 +377,11 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci switch (scu_get_event_type(completion_entry)) { case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: /* / @todo The driver did something wrong and we need to fix the condtion. */ - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC Controller 0x%p received SMU command error " "0x%x\n", __func__, - scic, + ihost, completion_entry); break; @@ -394,11 +391,11 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci /* * / @todo This is a hardware failure and its likely that we want to * / reset the controller. */ - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC Controller 0x%p received fatal controller " "event 0x%x\n", __func__, - scic, + ihost, completion_entry); break; @@ -415,27 +412,27 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci if (ireq != NULL) scic_sds_io_request_event_handler(ireq, completion_entry); else - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: SCIC Controller 0x%p received " "event 0x%x for io request object " "that doesnt exist.\n", __func__, - scic, + ihost, completion_entry); break; case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: - idev = scic->device_table[index]; + idev = ihost->device_table[index]; if (idev != NULL) scic_sds_remote_device_event_handler(idev, completion_entry); else - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: SCIC Controller 0x%p received " "event 0x%x for remote device object " "that doesnt exist.\n", __func__, - scic, + ihost, completion_entry); break; @@ -459,25 +456,25 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci case SCU_EVENT_TYPE_RNC_SUSPEND_TX: case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: case SCU_EVENT_TYPE_RNC_OPS_MISC: - if (index < scic->remote_node_entries) { - idev = scic->device_table[index]; + if (index < ihost->remote_node_entries) { + idev = ihost->device_table[index]; if (idev != NULL) scic_sds_remote_device_event_handler(idev, completion_entry); } else - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC Controller 0x%p received event 0x%x " "for remote device object 0x%0x that doesnt " "exist.\n", __func__, - scic, + ihost, completion_entry, index); break; default: - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: SCIC Controller received unknown event code %x\n", __func__, completion_entry); @@ -485,7 +482,7 @@ static void scic_sds_controller_event_completion(struct scic_sds_controller *sci } } -static void scic_sds_controller_process_completions(struct scic_sds_controller *scic) +static void scic_sds_controller_process_completions(struct isci_host *ihost) { u32 completion_count = 0; u32 completion_entry; @@ -494,47 +491,47 @@ static void scic_sds_controller_process_completions(struct scic_sds_controller * u32 event_get; u32 event_cycle; - dev_dbg(scic_to_dev(scic), + dev_dbg(&ihost->pdev->dev, "%s: completion queue begining get:0x%08x\n", __func__, - scic->completion_queue_get); + ihost->completion_queue_get); /* Get the component parts of the completion queue */ - get_index = NORMALIZE_GET_POINTER(scic->completion_queue_get); - get_cycle = SMU_CQGR_CYCLE_BIT & scic->completion_queue_get; + get_index = NORMALIZE_GET_POINTER(ihost->completion_queue_get); + get_cycle = SMU_CQGR_CYCLE_BIT & ihost->completion_queue_get; - event_get = NORMALIZE_EVENT_POINTER(scic->completion_queue_get); - event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & scic->completion_queue_get; + event_get = NORMALIZE_EVENT_POINTER(ihost->completion_queue_get); + event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & ihost->completion_queue_get; while ( NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) - == COMPLETION_QUEUE_CYCLE_BIT(scic->completion_queue[get_index]) + == COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index]) ) { completion_count++; - completion_entry = scic->completion_queue[get_index]; + completion_entry = ihost->completion_queue[get_index]; /* increment the get pointer and check for rollover to toggle the cycle bit */ get_cycle ^= ((get_index+1) & SCU_MAX_COMPLETION_QUEUE_ENTRIES) << (SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT - SCU_MAX_COMPLETION_QUEUE_SHIFT); get_index = (get_index+1) & (SCU_MAX_COMPLETION_QUEUE_ENTRIES-1); - dev_dbg(scic_to_dev(scic), + dev_dbg(&ihost->pdev->dev, "%s: completion queue entry:0x%08x\n", __func__, completion_entry); switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { case SCU_COMPLETION_TYPE_TASK: - scic_sds_controller_task_completion(scic, completion_entry); + scic_sds_controller_task_completion(ihost, completion_entry); break; case SCU_COMPLETION_TYPE_SDMA: - scic_sds_controller_sdma_completion(scic, completion_entry); + scic_sds_controller_sdma_completion(ihost, completion_entry); break; case SCU_COMPLETION_TYPE_UFI: - scic_sds_controller_unsolicited_frame(scic, completion_entry); + scic_sds_controller_unsolicited_frame(ihost, completion_entry); break; case SCU_COMPLETION_TYPE_EVENT: @@ -543,11 +540,11 @@ static void scic_sds_controller_process_completions(struct scic_sds_controller * (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT); event_get = (event_get+1) & (SCU_MAX_EVENTS-1); - scic_sds_controller_event_completion(scic, completion_entry); + scic_sds_controller_event_completion(ihost, completion_entry); break; } default: - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: SCIC Controller received unknown " "completion type %x\n", __func__, @@ -558,7 +555,7 @@ static void scic_sds_controller_process_completions(struct scic_sds_controller * /* Update the get register if we completed one or more entries */ if (completion_count > 0) { - scic->completion_queue_get = + ihost->completion_queue_get = SMU_CQGR_GEN_BIT(ENABLE) | SMU_CQGR_GEN_BIT(EVENT_ENABLE) | event_cycle | @@ -566,35 +563,35 @@ static void scic_sds_controller_process_completions(struct scic_sds_controller * get_cycle | SMU_CQGR_GEN_VAL(POINTER, get_index); - writel(scic->completion_queue_get, - &scic->smu_registers->completion_queue_get); + writel(ihost->completion_queue_get, + &ihost->smu_registers->completion_queue_get); } - dev_dbg(scic_to_dev(scic), + dev_dbg(&ihost->pdev->dev, "%s: completion queue ending get:0x%08x\n", __func__, - scic->completion_queue_get); + ihost->completion_queue_get); } -static void scic_sds_controller_error_handler(struct scic_sds_controller *scic) +static void scic_sds_controller_error_handler(struct isci_host *ihost) { u32 interrupt_status; interrupt_status = - readl(&scic->smu_registers->interrupt_status); + readl(&ihost->smu_registers->interrupt_status); if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && - scic_sds_controller_completion_queue_has_entries(scic)) { + scic_sds_controller_completion_queue_has_entries(ihost)) { - scic_sds_controller_process_completions(scic); - writel(SMU_ISR_QUEUE_SUSPEND, &scic->smu_registers->interrupt_status); + scic_sds_controller_process_completions(ihost); + writel(SMU_ISR_QUEUE_SUSPEND, &ihost->smu_registers->interrupt_status); } else { - dev_err(scic_to_dev(scic), "%s: status: %#x\n", __func__, + dev_err(&ihost->pdev->dev, "%s: status: %#x\n", __func__, interrupt_status); - sci_change_state(&scic->sm, SCIC_FAILED); + sci_change_state(&ihost->sm, SCIC_FAILED); return; } @@ -602,22 +599,21 @@ static void scic_sds_controller_error_handler(struct scic_sds_controller *scic) /* If we dont process any completions I am not sure that we want to do this. * We are in the middle of a hardware fault and should probably be reset. */ - writel(0, &scic->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); } irqreturn_t isci_intx_isr(int vec, void *data) { irqreturn_t ret = IRQ_NONE; struct isci_host *ihost = data; - struct scic_sds_controller *scic = &ihost->sci; - if (scic_sds_controller_isr(scic)) { - writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); + if (scic_sds_controller_isr(ihost)) { + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); tasklet_schedule(&ihost->completion_tasklet); ret = IRQ_HANDLED; - } else if (scic_sds_controller_error_isr(scic)) { + } else if (scic_sds_controller_error_isr(ihost)) { spin_lock(&ihost->scic_lock); - scic_sds_controller_error_handler(scic); + scic_sds_controller_error_handler(ihost); spin_unlock(&ihost->scic_lock); ret = IRQ_HANDLED; } @@ -629,8 +625,8 @@ irqreturn_t isci_error_isr(int vec, void *data) { struct isci_host *ihost = data; - if (scic_sds_controller_error_isr(&ihost->sci)) - scic_sds_controller_error_handler(&ihost->sci); + if (scic_sds_controller_error_isr(ihost)) + scic_sds_controller_error_handler(ihost); return IRQ_HANDLED; } @@ -685,11 +681,10 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) * This method returns the number of milliseconds for the suggested start * operation timeout. */ -static u32 scic_controller_get_suggested_start_timeout( - struct scic_sds_controller *sc) +static u32 scic_controller_get_suggested_start_timeout(struct isci_host *ihost) { /* Validate the user supplied parameters. */ - if (sc == NULL) + if (!ihost) return 0; /* @@ -711,35 +706,32 @@ static u32 scic_controller_get_suggested_start_timeout( + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); } -static void scic_controller_enable_interrupts( - struct scic_sds_controller *scic) +static void scic_controller_enable_interrupts(struct isci_host *ihost) { - BUG_ON(scic->smu_registers == NULL); - writel(0, &scic->smu_registers->interrupt_mask); + BUG_ON(ihost->smu_registers == NULL); + writel(0, &ihost->smu_registers->interrupt_mask); } -void scic_controller_disable_interrupts( - struct scic_sds_controller *scic) +void scic_controller_disable_interrupts(struct isci_host *ihost) { - BUG_ON(scic->smu_registers == NULL); - writel(0xffffffff, &scic->smu_registers->interrupt_mask); + BUG_ON(ihost->smu_registers == NULL); + writel(0xffffffff, &ihost->smu_registers->interrupt_mask); } -static void scic_sds_controller_enable_port_task_scheduler( - struct scic_sds_controller *scic) +static void scic_sds_controller_enable_port_task_scheduler(struct isci_host *ihost) { u32 port_task_scheduler_value; port_task_scheduler_value = - readl(&scic->scu_registers->peg0.ptsg.control); + readl(&ihost->scu_registers->peg0.ptsg.control); port_task_scheduler_value |= (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); writel(port_task_scheduler_value, - &scic->scu_registers->peg0.ptsg.control); + &ihost->scu_registers->peg0.ptsg.control); } -static void scic_sds_controller_assign_task_entries(struct scic_sds_controller *scic) +static void scic_sds_controller_assign_task_entries(struct isci_host *ihost) { u32 task_assignment; @@ -749,32 +741,32 @@ static void scic_sds_controller_assign_task_entries(struct scic_sds_controller * */ task_assignment = - readl(&scic->smu_registers->task_context_assignment[0]); + readl(&ihost->smu_registers->task_context_assignment[0]); task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | - (SMU_TCA_GEN_VAL(ENDING, scic->task_context_entries - 1)) | + (SMU_TCA_GEN_VAL(ENDING, ihost->task_context_entries - 1)) | (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); writel(task_assignment, - &scic->smu_registers->task_context_assignment[0]); + &ihost->smu_registers->task_context_assignment[0]); } -static void scic_sds_controller_initialize_completion_queue(struct scic_sds_controller *scic) +static void scic_sds_controller_initialize_completion_queue(struct isci_host *ihost) { u32 index; u32 completion_queue_control_value; u32 completion_queue_get_value; u32 completion_queue_put_value; - scic->completion_queue_get = 0; + ihost->completion_queue_get = 0; completion_queue_control_value = (SMU_CQC_QUEUE_LIMIT_SET(SCU_MAX_COMPLETION_QUEUE_ENTRIES - 1) | SMU_CQC_EVENT_LIMIT_SET(SCU_MAX_EVENTS - 1)); writel(completion_queue_control_value, - &scic->smu_registers->completion_queue_control); + &ihost->smu_registers->completion_queue_control); /* Set the completion queue get pointer and enable the queue */ @@ -786,7 +778,7 @@ static void scic_sds_controller_initialize_completion_queue(struct scic_sds_cont ); writel(completion_queue_get_value, - &scic->smu_registers->completion_queue_get); + &ihost->smu_registers->completion_queue_get); /* Set the completion queue put pointer */ completion_queue_put_value = ( @@ -795,7 +787,7 @@ static void scic_sds_controller_initialize_completion_queue(struct scic_sds_cont ); writel(completion_queue_put_value, - &scic->smu_registers->completion_queue_put); + &ihost->smu_registers->completion_queue_put); /* Initialize the cycle bit of the completion queue entries */ for (index = 0; index < SCU_MAX_COMPLETION_QUEUE_ENTRIES; index++) { @@ -803,11 +795,11 @@ static void scic_sds_controller_initialize_completion_queue(struct scic_sds_cont * If get.cycle_bit != completion_queue.cycle_bit * its not a valid completion queue entry * so at system start all entries are invalid */ - scic->completion_queue[index] = 0x80000000; + ihost->completion_queue[index] = 0x80000000; } } -static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_sds_controller *scic) +static void scic_sds_controller_initialize_unsolicited_frame_queue(struct isci_host *ihost) { u32 frame_queue_control_value; u32 frame_queue_get_value; @@ -818,7 +810,7 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_s SCU_UFQC_GEN_VAL(QUEUE_SIZE, SCU_MAX_UNSOLICITED_FRAMES); writel(frame_queue_control_value, - &scic->scu_registers->sdma.unsolicited_frame_queue_control); + &ihost->scu_registers->sdma.unsolicited_frame_queue_control); /* Setup the get pointer for the unsolicited frame queue */ frame_queue_get_value = ( @@ -827,11 +819,11 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_s ); writel(frame_queue_get_value, - &scic->scu_registers->sdma.unsolicited_frame_get_pointer); + &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); /* Setup the put pointer for the unsolicited frame queue */ frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); writel(frame_queue_put_value, - &scic->scu_registers->sdma.unsolicited_frame_put_pointer); + &ihost->scu_registers->sdma.unsolicited_frame_put_pointer); } /** @@ -846,17 +838,16 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue(struct scic_s * none. */ static void scic_sds_controller_transition_to_ready( - struct scic_sds_controller *scic, + struct isci_host *ihost, enum sci_status status) { - struct isci_host *ihost = scic_to_ihost(scic); - if (scic->sm.current_state_id == SCIC_STARTING) { + if (ihost->sm.current_state_id == SCIC_STARTING) { /* * We move into the ready state, because some of the phys/ports * may be up and operational. */ - sci_change_state(&scic->sm, SCIC_READY); + sci_change_state(&ihost->sm, SCIC_READY); isci_host_start_complete(ihost, status); } @@ -892,19 +883,18 @@ static bool is_phy_starting(struct isci_phy *iphy) * controller to the READY state and inform the user * (scic_cb_controller_start_complete()). */ -static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic) +static enum sci_status scic_sds_controller_start_next_phy(struct isci_host *ihost) { - struct isci_host *ihost = scic_to_ihost(scic); - struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; + struct scic_sds_oem_params *oem = &ihost->oem_parameters.sds1; struct isci_phy *iphy; enum sci_status status; status = SCI_SUCCESS; - if (scic->phy_startup_timer_pending) + if (ihost->phy_startup_timer_pending) return status; - if (scic->next_phy_to_start >= SCI_MAX_PHYS) { + if (ihost->next_phy_to_start >= SCI_MAX_PHYS) { bool is_controller_start_complete = true; u32 state; u8 index; @@ -934,16 +924,16 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro * The controller has successfully finished the start process. * Inform the SCI Core user and transition to the READY state. */ if (is_controller_start_complete == true) { - scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS); - sci_del_timer(&scic->phy_timer); - scic->phy_startup_timer_pending = false; + scic_sds_controller_transition_to_ready(ihost, SCI_SUCCESS); + sci_del_timer(&ihost->phy_timer); + ihost->phy_startup_timer_pending = false; } } else { - iphy = &ihost->phys[scic->next_phy_to_start]; + iphy = &ihost->phys[ihost->next_phy_to_start]; if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { if (phy_get_non_dummy_port(iphy) == NULL) { - scic->next_phy_to_start++; + ihost->next_phy_to_start++; /* Caution recursion ahead be forwarned * @@ -954,27 +944,27 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro * incorrectly for the PORT or it was never * assigned to a PORT */ - return scic_sds_controller_start_next_phy(scic); + return scic_sds_controller_start_next_phy(ihost); } } status = scic_sds_phy_start(iphy); if (status == SCI_SUCCESS) { - sci_mod_timer(&scic->phy_timer, + sci_mod_timer(&ihost->phy_timer, SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); - scic->phy_startup_timer_pending = true; + ihost->phy_startup_timer_pending = true; } else { - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: Controller stop operation failed " "to stop phy %d because of status " "%d.\n", __func__, - ihost->phys[scic->next_phy_to_start].phy_index, + ihost->phys[ihost->next_phy_to_start].phy_index, status); } - scic->next_phy_to_start++; + ihost->next_phy_to_start++; } return status; @@ -983,8 +973,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_contro static void phy_startup_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; - struct scic_sds_controller *scic = container_of(tmr, typeof(*scic), phy_timer); - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = container_of(tmr, typeof(*ihost), phy_timer); unsigned long flags; enum sci_status status; @@ -993,10 +982,10 @@ static void phy_startup_timeout(unsigned long data) if (tmr->cancel) goto done; - scic->phy_startup_timer_pending = false; + ihost->phy_startup_timer_pending = false; do { - status = scic_sds_controller_start_next_phy(scic); + status = scic_sds_controller_start_next_phy(ihost); } while (status != SCI_SUCCESS); done: @@ -1008,15 +997,14 @@ static u16 isci_tci_active(struct isci_host *ihost) return CIRC_CNT(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); } -static enum sci_status scic_controller_start(struct scic_sds_controller *scic, +static enum sci_status scic_controller_start(struct isci_host *ihost, u32 timeout) { - struct isci_host *ihost = scic_to_ihost(scic); enum sci_status result; u16 index; - if (scic->sm.current_state_id != SCIC_INITIALIZED) { - dev_warn(scic_to_dev(scic), + if (ihost->sm.current_state_id != SCIC_INITIALIZED) { + dev_warn(&ihost->pdev->dev, "SCIC Controller start operation requested in " "invalid state\n"); return SCI_FAILURE_INVALID_STATE; @@ -1026,34 +1014,34 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, BUILD_BUG_ON(SCI_MAX_IO_REQUESTS > 1 << sizeof(ihost->tci_pool[0]) * 8); ihost->tci_head = 0; ihost->tci_tail = 0; - for (index = 0; index < scic->task_context_entries; index++) + for (index = 0; index < ihost->task_context_entries; index++) isci_tci_free(ihost, index); /* Build the RNi free pool */ scic_sds_remote_node_table_initialize( - &scic->available_remote_nodes, - scic->remote_node_entries); + &ihost->available_remote_nodes, + ihost->remote_node_entries); /* * Before anything else lets make sure we will not be * interrupted by the hardware. */ - scic_controller_disable_interrupts(scic); + scic_controller_disable_interrupts(ihost); /* Enable the port task scheduler */ - scic_sds_controller_enable_port_task_scheduler(scic); + scic_sds_controller_enable_port_task_scheduler(ihost); - /* Assign all the task entries to scic physical function */ - scic_sds_controller_assign_task_entries(scic); + /* Assign all the task entries to ihost physical function */ + scic_sds_controller_assign_task_entries(ihost); /* Now initialize the completion queue */ - scic_sds_controller_initialize_completion_queue(scic); + scic_sds_controller_initialize_completion_queue(ihost); /* Initialize the unsolicited frame queue for use */ - scic_sds_controller_initialize_unsolicited_frame_queue(scic); + scic_sds_controller_initialize_unsolicited_frame_queue(ihost); /* Start all of the ports on this controller */ - for (index = 0; index < scic->logical_port_entries; index++) { + for (index = 0; index < ihost->logical_port_entries; index++) { struct isci_port *iport = &ihost->ports[index]; result = scic_sds_port_start(iport); @@ -1061,11 +1049,11 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, return result; } - scic_sds_controller_start_next_phy(scic); + scic_sds_controller_start_next_phy(ihost); - sci_mod_timer(&scic->timer, timeout); + sci_mod_timer(&ihost->timer, timeout); - sci_change_state(&scic->sm, SCIC_STARTING); + sci_change_state(&ihost->sm, SCIC_STARTING); return SCI_SUCCESS; } @@ -1073,35 +1061,35 @@ static enum sci_status scic_controller_start(struct scic_sds_controller *scic, void isci_host_scan_start(struct Scsi_Host *shost) { struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; - unsigned long tmo = scic_controller_get_suggested_start_timeout(&ihost->sci); + unsigned long tmo = scic_controller_get_suggested_start_timeout(ihost); set_bit(IHOST_START_PENDING, &ihost->flags); spin_lock_irq(&ihost->scic_lock); - scic_controller_start(&ihost->sci, tmo); - scic_controller_enable_interrupts(&ihost->sci); + scic_controller_start(ihost, tmo); + scic_controller_enable_interrupts(ihost); spin_unlock_irq(&ihost->scic_lock); } static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) { isci_host_change_state(ihost, isci_stopped); - scic_controller_disable_interrupts(&ihost->sci); + scic_controller_disable_interrupts(ihost); clear_bit(IHOST_STOP_PENDING, &ihost->flags); wake_up(&ihost->eventq); } -static void scic_sds_controller_completion_handler(struct scic_sds_controller *scic) +static void scic_sds_controller_completion_handler(struct isci_host *ihost) { /* Empty out the completion queue */ - if (scic_sds_controller_completion_queue_has_entries(scic)) - scic_sds_controller_process_completions(scic); + if (scic_sds_controller_completion_queue_has_entries(ihost)) + scic_sds_controller_process_completions(ihost); /* Clear the interrupt and enable all interrupts again */ - writel(SMU_ISR_COMPLETION, &scic->smu_registers->interrupt_status); + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); /* Could we write the value of SMU_ISR_COMPLETION? */ - writel(0xFF000000, &scic->smu_registers->interrupt_mask); - writel(0, &scic->smu_registers->interrupt_mask); + writel(0xFF000000, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); } /** @@ -1114,7 +1102,7 @@ static void scic_sds_controller_completion_handler(struct scic_sds_controller *s */ static void isci_host_completion_routine(unsigned long data) { - struct isci_host *isci_host = (struct isci_host *)data; + struct isci_host *ihost = (struct isci_host *)data; struct list_head completed_request_list; struct list_head errored_request_list; struct list_head *current_position; @@ -1126,20 +1114,20 @@ static void isci_host_completion_routine(unsigned long data) INIT_LIST_HEAD(&completed_request_list); INIT_LIST_HEAD(&errored_request_list); - spin_lock_irq(&isci_host->scic_lock); + spin_lock_irq(&ihost->scic_lock); - scic_sds_controller_completion_handler(&isci_host->sci); + scic_sds_controller_completion_handler(ihost); /* Take the lists of completed I/Os from the host. */ - list_splice_init(&isci_host->requests_to_complete, + list_splice_init(&ihost->requests_to_complete, &completed_request_list); /* Take the list of errored I/Os from the host. */ - list_splice_init(&isci_host->requests_to_errorback, + list_splice_init(&ihost->requests_to_errorback, &errored_request_list); - spin_unlock_irq(&isci_host->scic_lock); + spin_unlock_irq(&ihost->scic_lock); /* Process any completions in the lists. */ list_for_each_safe(current_position, next_position, @@ -1150,7 +1138,7 @@ static void isci_host_completion_routine(unsigned long data) task = isci_request_access_task(request); /* Normal notification (task_done) */ - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: Normal - request/task = %p/%p\n", __func__, request, @@ -1169,9 +1157,9 @@ static void isci_host_completion_routine(unsigned long data) } } - spin_lock_irq(&isci_host->scic_lock); - isci_free_tag(isci_host, request->io_tag); - spin_unlock_irq(&isci_host->scic_lock); + spin_lock_irq(&ihost->scic_lock); + isci_free_tag(ihost, request->io_tag); + spin_unlock_irq(&ihost->scic_lock); } list_for_each_entry_safe(request, next_request, &errored_request_list, completed_node) { @@ -1179,7 +1167,7 @@ static void isci_host_completion_routine(unsigned long data) task = isci_request_access_task(request); /* Use sas_task_abort */ - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: Error - request/task = %p/%p\n", __func__, request, @@ -1202,13 +1190,13 @@ static void isci_host_completion_routine(unsigned long data) * it. */ - spin_lock_irq(&isci_host->scic_lock); + spin_lock_irq(&ihost->scic_lock); /* Remove the request from the remote device's list * of pending requests. */ list_del_init(&request->dev_node); - isci_free_tag(isci_host, request->io_tag); - spin_unlock_irq(&isci_host->scic_lock); + isci_free_tag(ihost, request->io_tag); + spin_unlock_irq(&ihost->scic_lock); } } @@ -1232,18 +1220,18 @@ static void isci_host_completion_routine(unsigned long data) * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the * controller is not either in the STARTED or STOPPED states. */ -static enum sci_status scic_controller_stop(struct scic_sds_controller *scic, +static enum sci_status scic_controller_stop(struct isci_host *ihost, u32 timeout) { - if (scic->sm.current_state_id != SCIC_READY) { - dev_warn(scic_to_dev(scic), + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "SCIC Controller stop operation requested in " "invalid state\n"); return SCI_FAILURE_INVALID_STATE; } - sci_mod_timer(&scic->timer, timeout); - sci_change_state(&scic->sm, SCIC_STOPPING); + sci_mod_timer(&ihost->timer, timeout); + sci_change_state(&ihost->sm, SCIC_STOPPING); return SCI_SUCCESS; } @@ -1259,9 +1247,9 @@ static enum sci_status scic_controller_stop(struct scic_sds_controller *scic, * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if * the controller reset operation is unable to complete. */ -static enum sci_status scic_controller_reset(struct scic_sds_controller *scic) +static enum sci_status scic_controller_reset(struct isci_host *ihost) { - switch (scic->sm.current_state_id) { + switch (ihost->sm.current_state_id) { case SCIC_RESET: case SCIC_READY: case SCIC_STOPPED: @@ -1270,10 +1258,10 @@ static enum sci_status scic_controller_reset(struct scic_sds_controller *scic) * The reset operation is not a graceful cleanup, just * perform the state transition. */ - sci_change_state(&scic->sm, SCIC_RESETTING); + sci_change_state(&ihost->sm, SCIC_RESETTING); return SCI_SUCCESS; default: - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "SCIC Controller reset operation requested in " "invalid state\n"); return SCI_FAILURE_INVALID_STATE; @@ -1298,14 +1286,14 @@ void isci_host_deinit(struct isci_host *ihost) set_bit(IHOST_STOP_PENDING, &ihost->flags); spin_lock_irq(&ihost->scic_lock); - scic_controller_stop(&ihost->sci, SCIC_CONTROLLER_STOP_TIMEOUT); + scic_controller_stop(ihost, SCIC_CONTROLLER_STOP_TIMEOUT); spin_unlock_irq(&ihost->scic_lock); wait_for_stop(ihost); - scic_controller_reset(&ihost->sci); + scic_controller_reset(ihost); /* Cancel any/all outstanding port timers */ - for (i = 0; i < ihost->sci.logical_port_entries; i++) { + for (i = 0; i < ihost->logical_port_entries; i++) { struct isci_port *iport = &ihost->ports[i]; del_timer_sync(&iport->timer.timer); } @@ -1316,13 +1304,13 @@ void isci_host_deinit(struct isci_host *ihost) del_timer_sync(&iphy->sata_timer.timer); } - del_timer_sync(&ihost->sci.port_agent.timer.timer); + del_timer_sync(&ihost->port_agent.timer.timer); - del_timer_sync(&ihost->sci.power_control.timer.timer); + del_timer_sync(&ihost->power_control.timer.timer); - del_timer_sync(&ihost->sci.timer.timer); + del_timer_sync(&ihost->timer.timer); - del_timer_sync(&ihost->sci.phy_timer.timer); + del_timer_sync(&ihost->phy_timer.timer); } static void __iomem *scu_base(struct isci_host *isci_host) @@ -1369,16 +1357,16 @@ static void isci_user_parameters_get( static void scic_sds_controller_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); - sci_change_state(&scic->sm, SCIC_RESET); + sci_change_state(&ihost->sm, SCIC_RESET); } static inline void scic_sds_controller_starting_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); - sci_del_timer(&scic->timer); + sci_del_timer(&ihost->timer); } #define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 @@ -1405,10 +1393,10 @@ static inline void scic_sds_controller_starting_state_exit(struct sci_base_state * SCI_SUCCESS The user successfully updated the interrutp coalescence. * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. */ -static enum sci_status scic_controller_set_interrupt_coalescence( - struct scic_sds_controller *scic_controller, - u32 coalesce_number, - u32 coalesce_timeout) +static enum sci_status +scic_controller_set_interrupt_coalescence(struct isci_host *ihost, + u32 coalesce_number, + u32 coalesce_timeout) { u8 timeout_encode = 0; u32 min = 0; @@ -1491,11 +1479,11 @@ static enum sci_status scic_controller_set_interrupt_coalescence( writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | SMU_ICC_GEN_VAL(TIMER, timeout_encode), - &scic_controller->smu_registers->interrupt_coalesce_control); + &ihost->smu_registers->interrupt_coalesce_control); - scic_controller->interrupt_coalesce_number = (u16)coalesce_number; - scic_controller->interrupt_coalesce_timeout = coalesce_timeout / 100; + ihost->interrupt_coalesce_number = (u16)coalesce_number; + ihost->interrupt_coalesce_timeout = coalesce_timeout / 100; return SCI_SUCCESS; } @@ -1503,26 +1491,25 @@ static enum sci_status scic_controller_set_interrupt_coalescence( static void scic_sds_controller_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* set the default interrupt coalescence number and timeout value. */ - scic_controller_set_interrupt_coalescence(scic, 0x10, 250); + scic_controller_set_interrupt_coalescence(ihost, 0x10, 250); } static void scic_sds_controller_ready_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* disable interrupt coalescence. */ - scic_controller_set_interrupt_coalescence(scic, 0, 0); + scic_controller_set_interrupt_coalescence(ihost, 0, 0); } -static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller *scic) +static enum sci_status scic_sds_controller_stop_phys(struct isci_host *ihost) { u32 index; enum sci_status status; enum sci_status phy_status; - struct isci_host *ihost = scic_to_ihost(scic); status = SCI_SUCCESS; @@ -1533,7 +1520,7 @@ static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller phy_status != SCI_FAILURE_INVALID_STATE) { status = SCI_FAILURE; - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: Controller stop operation failed to stop " "phy %d because of status %d.\n", __func__, @@ -1544,14 +1531,13 @@ static enum sci_status scic_sds_controller_stop_phys(struct scic_sds_controller return status; } -static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic) +static enum sci_status scic_sds_controller_stop_ports(struct isci_host *ihost) { u32 index; enum sci_status port_status; enum sci_status status = SCI_SUCCESS; - struct isci_host *ihost = scic_to_ihost(scic); - for (index = 0; index < scic->logical_port_entries; index++) { + for (index = 0; index < ihost->logical_port_entries; index++) { struct isci_port *iport = &ihost->ports[index]; port_status = scic_sds_port_stop(iport); @@ -1560,7 +1546,7 @@ static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller (port_status != SCI_FAILURE_INVALID_STATE)) { status = SCI_FAILURE; - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: Controller stop operation failed to " "stop port %d because of status %d.\n", __func__, @@ -1572,7 +1558,7 @@ static enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller return status; } -static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controller *scic) +static enum sci_status scic_sds_controller_stop_devices(struct isci_host *ihost) { u32 index; enum sci_status status; @@ -1580,19 +1566,19 @@ static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controll status = SCI_SUCCESS; - for (index = 0; index < scic->remote_node_entries; index++) { - if (scic->device_table[index] != NULL) { + for (index = 0; index < ihost->remote_node_entries; index++) { + if (ihost->device_table[index] != NULL) { /* / @todo What timeout value do we want to provide to this request? */ - device_status = scic_remote_device_stop(scic->device_table[index], 0); + device_status = scic_remote_device_stop(ihost->device_table[index], 0); if ((device_status != SCI_SUCCESS) && (device_status != SCI_FAILURE_INVALID_STATE)) { - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: Controller stop operation failed " "to stop device 0x%p because of " "status %d.\n", __func__, - scic->device_table[index], device_status); + ihost->device_table[index], device_status); } } } @@ -1602,19 +1588,19 @@ static enum sci_status scic_sds_controller_stop_devices(struct scic_sds_controll static void scic_sds_controller_stopping_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* Stop all of the components for this controller */ - scic_sds_controller_stop_phys(scic); - scic_sds_controller_stop_ports(scic); - scic_sds_controller_stop_devices(scic); + scic_sds_controller_stop_phys(ihost); + scic_sds_controller_stop_ports(ihost); + scic_sds_controller_stop_devices(ihost); } static void scic_sds_controller_stopping_state_exit(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); - sci_del_timer(&scic->timer); + sci_del_timer(&ihost->timer); } @@ -1623,30 +1609,30 @@ static void scic_sds_controller_stopping_state_exit(struct sci_base_state_machin * * This method will reset the controller hardware. */ -static void scic_sds_controller_reset_hardware(struct scic_sds_controller *scic) +static void scic_sds_controller_reset_hardware(struct isci_host *ihost) { /* Disable interrupts so we dont take any spurious interrupts */ - scic_controller_disable_interrupts(scic); + scic_controller_disable_interrupts(ihost); /* Reset the SCU */ - writel(0xFFFFFFFF, &scic->smu_registers->soft_reset_control); + writel(0xFFFFFFFF, &ihost->smu_registers->soft_reset_control); /* Delay for 1ms to before clearing the CQP and UFQPR. */ udelay(1000); /* The write to the CQGR clears the CQP */ - writel(0x00000000, &scic->smu_registers->completion_queue_get); + writel(0x00000000, &ihost->smu_registers->completion_queue_get); /* The write to the UFQGP clears the UFQPR */ - writel(0, &scic->scu_registers->sdma.unsolicited_frame_get_pointer); + writel(0, &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); } static void scic_sds_controller_resetting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_controller *scic = container_of(sm, typeof(*scic), sm); + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); - scic_sds_controller_reset_hardware(scic); - sci_change_state(&scic->sm, SCIC_RESET); + scic_sds_controller_reset_hardware(ihost); + sci_change_state(&ihost->sm, SCIC_RESET); } static const struct sci_base_state scic_sds_controller_state_table[] = { @@ -1674,58 +1660,56 @@ static const struct sci_base_state scic_sds_controller_state_table[] = { [SCIC_FAILED] = {} }; -static void scic_sds_controller_set_default_config_parameters(struct scic_sds_controller *scic) +static void scic_sds_controller_set_default_config_parameters(struct isci_host *ihost) { /* these defaults are overridden by the platform / firmware */ - struct isci_host *ihost = scic_to_ihost(scic); u16 index; /* Default to APC mode. */ - scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; + ihost->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; /* Default to APC mode. */ - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1; + ihost->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1; /* Default to no SSC operation. */ - scic->oem_parameters.sds1.controller.do_enable_ssc = false; + ihost->oem_parameters.sds1.controller.do_enable_ssc = false; /* Initialize all of the port parameter information to narrow ports. */ for (index = 0; index < SCI_MAX_PORTS; index++) { - scic->oem_parameters.sds1.ports[index].phy_mask = 0; + ihost->oem_parameters.sds1.ports[index].phy_mask = 0; } /* Initialize all of the phy parameter information. */ for (index = 0; index < SCI_MAX_PHYS; index++) { /* Default to 6G (i.e. Gen 3) for now. */ - scic->user_parameters.sds1.phys[index].max_speed_generation = 3; + ihost->user_parameters.sds1.phys[index].max_speed_generation = 3; /* the frequencies cannot be 0 */ - scic->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; - scic->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff; - scic->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; + ihost->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; + ihost->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff; + ihost->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; /* * Previous Vitesse based expanders had a arbitration issue that * is worked around by having the upper 32-bits of SAS address * with a value greater then the Vitesse company identifier. * Hence, usage of 0x5FCFFFFF. */ - scic->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id; - scic->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; + ihost->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id; + ihost->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; } - scic->user_parameters.sds1.stp_inactivity_timeout = 5; - scic->user_parameters.sds1.ssp_inactivity_timeout = 5; - scic->user_parameters.sds1.stp_max_occupancy_timeout = 5; - scic->user_parameters.sds1.ssp_max_occupancy_timeout = 20; - scic->user_parameters.sds1.no_outbound_task_timeout = 20; + ihost->user_parameters.sds1.stp_inactivity_timeout = 5; + ihost->user_parameters.sds1.ssp_inactivity_timeout = 5; + ihost->user_parameters.sds1.stp_max_occupancy_timeout = 5; + ihost->user_parameters.sds1.ssp_max_occupancy_timeout = 20; + ihost->user_parameters.sds1.no_outbound_task_timeout = 20; } static void controller_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; - struct scic_sds_controller *scic = container_of(tmr, typeof(*scic), timer); - struct isci_host *ihost = scic_to_ihost(scic); - struct sci_base_state_machine *sm = &scic->sm; + struct isci_host *ihost = container_of(tmr, typeof(*ihost), timer); + struct sci_base_state_machine *sm = &ihost->sm; unsigned long flags; spin_lock_irqsave(&ihost->scic_lock, flags); @@ -1734,12 +1718,12 @@ static void controller_timeout(unsigned long data) goto done; if (sm->current_state_id == SCIC_STARTING) - scic_sds_controller_transition_to_ready(scic, SCI_FAILURE_TIMEOUT); + scic_sds_controller_transition_to_ready(ihost, SCI_FAILURE_TIMEOUT); else if (sm->current_state_id == SCIC_STOPPING) { sci_change_state(sm, SCIC_FAILED); isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); } else /* / @todo Now what do we want to do in this case? */ - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: Controller timer fired when controller was not " "in a state being timed.\n", __func__); @@ -1764,24 +1748,23 @@ done: * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the * controller does not support the supplied initialization data version. */ -static enum sci_status scic_controller_construct(struct scic_sds_controller *scic, +static enum sci_status scic_controller_construct(struct isci_host *ihost, void __iomem *scu_base, void __iomem *smu_base) { - struct isci_host *ihost = scic_to_ihost(scic); u8 i; - sci_init_sm(&scic->sm, scic_sds_controller_state_table, SCIC_INITIAL); + sci_init_sm(&ihost->sm, scic_sds_controller_state_table, SCIC_INITIAL); - scic->scu_registers = scu_base; - scic->smu_registers = smu_base; + ihost->scu_registers = scu_base; + ihost->smu_registers = smu_base; - scic_sds_port_configuration_agent_construct(&scic->port_agent); + scic_sds_port_configuration_agent_construct(&ihost->port_agent); /* Construct the ports for this controller */ for (i = 0; i < SCI_MAX_PORTS; i++) - scic_sds_port_construct(&ihost->ports[i], i, scic); - scic_sds_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, scic); + scic_sds_port_construct(&ihost->ports[i], i, ihost); + scic_sds_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, ihost); /* Construct the phys for this controller */ for (i = 0; i < SCI_MAX_PHYS; i++) { @@ -1790,14 +1773,14 @@ static enum sci_status scic_controller_construct(struct scic_sds_controller *sci &ihost->ports[SCI_MAX_PORTS], i); } - scic->invalid_phy_mask = 0; + ihost->invalid_phy_mask = 0; - sci_init_timer(&scic->timer, controller_timeout); + sci_init_timer(&ihost->timer, controller_timeout); /* Initialize the User and OEM parameters to default values. */ - scic_sds_controller_set_default_config_parameters(scic); + scic_sds_controller_set_default_config_parameters(ihost); - return scic_controller_reset(scic); + return scic_controller_reset(ihost); } int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) @@ -1834,10 +1817,10 @@ int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) return 0; } -static enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, +static enum sci_status scic_oem_parameters_set(struct isci_host *ihost, union scic_oem_parameters *scic_parms) { - u32 state = scic->sm.current_state_id; + u32 state = ihost->sm.current_state_id; if (state == SCIC_RESET || state == SCIC_INITIALIZING || @@ -1845,7 +1828,7 @@ static enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, if (scic_oem_parameters_validate(&scic_parms->sds1)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - scic->oem_parameters.sds1 = scic_parms->sds1; + ihost->oem_parameters.sds1 = scic_parms->sds1; return SCI_SUCCESS; } @@ -1854,17 +1837,16 @@ static enum sci_status scic_oem_parameters_set(struct scic_sds_controller *scic, } void scic_oem_parameters_get( - struct scic_sds_controller *scic, + struct isci_host *ihost, union scic_oem_parameters *scic_parms) { - memcpy(scic_parms, (&scic->oem_parameters), sizeof(*scic_parms)); + memcpy(scic_parms, (&ihost->oem_parameters), sizeof(*scic_parms)); } static void power_control_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; - struct scic_sds_controller *scic = container_of(tmr, typeof(*scic), power_control.timer); - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = container_of(tmr, typeof(*ihost), power_control.timer); struct isci_phy *iphy; unsigned long flags; u8 i; @@ -1874,29 +1856,29 @@ static void power_control_timeout(unsigned long data) if (tmr->cancel) goto done; - scic->power_control.phys_granted_power = 0; + ihost->power_control.phys_granted_power = 0; - if (scic->power_control.phys_waiting == 0) { - scic->power_control.timer_started = false; + if (ihost->power_control.phys_waiting == 0) { + ihost->power_control.timer_started = false; goto done; } for (i = 0; i < SCI_MAX_PHYS; i++) { - if (scic->power_control.phys_waiting == 0) + if (ihost->power_control.phys_waiting == 0) break; - iphy = scic->power_control.requesters[i]; + iphy = ihost->power_control.requesters[i]; if (iphy == NULL) continue; - if (scic->power_control.phys_granted_power >= - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) + if (ihost->power_control.phys_granted_power >= + ihost->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) break; - scic->power_control.requesters[i] = NULL; - scic->power_control.phys_waiting--; - scic->power_control.phys_granted_power++; + ihost->power_control.requesters[i] = NULL; + ihost->power_control.phys_waiting--; + ihost->power_control.phys_granted_power++; scic_sds_phy_consume_power_handler(iphy); } @@ -1905,7 +1887,7 @@ static void power_control_timeout(unsigned long data) * timer in case another phy becomes ready. */ sci_mod_timer(tmr, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); - scic->power_control.timer_started = true; + ihost->power_control.timer_started = true; done: spin_unlock_irqrestore(&ihost->scic_lock, flags); @@ -1918,31 +1900,31 @@ done: * */ void scic_sds_controller_power_control_queue_insert( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_phy *iphy) { BUG_ON(iphy == NULL); - if (scic->power_control.phys_granted_power < - scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { - scic->power_control.phys_granted_power++; + if (ihost->power_control.phys_granted_power < + ihost->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + ihost->power_control.phys_granted_power++; scic_sds_phy_consume_power_handler(iphy); /* * stop and start the power_control timer. When the timer fires, the * no_of_phys_granted_power will be set to 0 */ - if (scic->power_control.timer_started) - sci_del_timer(&scic->power_control.timer); + if (ihost->power_control.timer_started) + sci_del_timer(&ihost->power_control.timer); - sci_mod_timer(&scic->power_control.timer, + sci_mod_timer(&ihost->power_control.timer, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); - scic->power_control.timer_started = true; + ihost->power_control.timer_started = true; } else { /* Add the phy in the waiting list */ - scic->power_control.requesters[iphy->phy_index] = iphy; - scic->power_control.phys_waiting++; + ihost->power_control.requesters[iphy->phy_index] = iphy; + ihost->power_control.phys_waiting++; } } @@ -1953,16 +1935,16 @@ void scic_sds_controller_power_control_queue_insert( * */ void scic_sds_controller_power_control_queue_remove( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_phy *iphy) { BUG_ON(iphy == NULL); - if (scic->power_control.requesters[iphy->phy_index] != NULL) { - scic->power_control.phys_waiting--; + if (ihost->power_control.requesters[iphy->phy_index] != NULL) { + ihost->power_control.phys_waiting--; } - scic->power_control.requesters[iphy->phy_index] = NULL; + ihost->power_control.requesters[iphy->phy_index] = NULL; } #define AFE_REGISTER_WRITE_DELAY 10 @@ -1970,50 +1952,50 @@ void scic_sds_controller_power_control_queue_remove( /* Initialize the AFE for this phy index. We need to read the AFE setup from * the OEM parameters */ -static void scic_sds_controller_afe_initialization(struct scic_sds_controller *scic) +static void scic_sds_controller_afe_initialization(struct isci_host *ihost) { - const struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1; + const struct scic_sds_oem_params *oem = &ihost->oem_parameters.sds1; u32 afe_status; u32 phy_id; /* Clear DFX Status registers */ - writel(0x0081000f, &scic->scu_registers->afe.afe_dfx_master_control0); + writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); if (is_b0()) { /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement * Timer, PM Stagger Timer */ - writel(0x0007BFFF, &scic->scu_registers->afe.afe_pmsn_master_control2); + writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2); udelay(AFE_REGISTER_WRITE_DELAY); } /* Configure bias currents to normal */ if (is_a0()) - writel(0x00005500, &scic->scu_registers->afe.afe_bias_control); + writel(0x00005500, &ihost->scu_registers->afe.afe_bias_control); else if (is_a2()) - writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control); + writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control); else if (is_b0() || is_c0()) - writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control); + writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ if (is_b0() || is_c0()) - writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0); + writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0); else - writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0); + writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Wait for the PLL to lock */ do { - afe_status = readl(&scic->scu_registers->afe.afe_common_block_status); + afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status); udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); if (is_a0() || is_a2()) { /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ - writel(0x7bcc96ad, &scic->scu_registers->afe.afe_pmsn_master_control0); + writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -2022,26 +2004,26 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s if (is_b0()) { /* Configure transmitter SSC parameters */ - writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); } else if (is_c0()) { /* Configure transmitter SSC parameters */ - writel(0x0003000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); /* * All defaults, except the Receive Word Alignament/Comma Detect * Enable....(0xe800) */ - writel(0x00004500, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); } else { /* * All defaults, except the Receive Word Alignament/Comma Detect * Enable....(0xe800) */ - writel(0x00004512, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); - writel(0x0050100F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); + writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); udelay(AFE_REGISTER_WRITE_DELAY); } @@ -2049,106 +2031,105 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ if (is_a0()) - writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); else if (is_a2()) - writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); else if (is_b0()) { /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - writel(0x000003D7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); /* * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); } else { - writel(0x000001E7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); /* * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000001E4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); } udelay(AFE_REGISTER_WRITE_DELAY); if (is_a0() || is_a2()) { /* Enable TX equalization (0xe824) */ - writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); udelay(AFE_REGISTER_WRITE_DELAY); } /* * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), * RDD=0x0(RX Detect Enabled) ....(0xe800) */ - writel(0x00004100, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Leave DFE/FFE on */ if (is_a0()) - writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F09983F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); else if (is_a2()) - writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); else if (is_b0()) { - writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); } else { - writel(0x0140DF0F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1); + writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1); udelay(AFE_REGISTER_WRITE_DELAY); - writel(0x3F6F103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); } udelay(AFE_REGISTER_WRITE_DELAY); writel(oem_phy->afe_tx_amp_control0, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); udelay(AFE_REGISTER_WRITE_DELAY); writel(oem_phy->afe_tx_amp_control1, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); udelay(AFE_REGISTER_WRITE_DELAY); writel(oem_phy->afe_tx_amp_control2, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); udelay(AFE_REGISTER_WRITE_DELAY); writel(oem_phy->afe_tx_amp_control3, - &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); udelay(AFE_REGISTER_WRITE_DELAY); } /* Transfer control to the PEs */ - writel(0x00010f00, &scic->scu_registers->afe.afe_dfx_master_control0); + writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } -static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic) +static void scic_sds_controller_initialize_power_control(struct isci_host *ihost) { - sci_init_timer(&scic->power_control.timer, power_control_timeout); + sci_init_timer(&ihost->power_control.timer, power_control_timeout); - memset(scic->power_control.requesters, 0, - sizeof(scic->power_control.requesters)); + memset(ihost->power_control.requesters, 0, + sizeof(ihost->power_control.requesters)); - scic->power_control.phys_waiting = 0; - scic->power_control.phys_granted_power = 0; + ihost->power_control.phys_waiting = 0; + ihost->power_control.phys_granted_power = 0; } -static enum sci_status scic_controller_initialize(struct scic_sds_controller *scic) +static enum sci_status scic_controller_initialize(struct isci_host *ihost) { - struct sci_base_state_machine *sm = &scic->sm; - struct isci_host *ihost = scic_to_ihost(scic); + struct sci_base_state_machine *sm = &ihost->sm; enum sci_status result = SCI_FAILURE; unsigned long i, state, val; - if (scic->sm.current_state_id != SCIC_RESET) { - dev_warn(scic_to_dev(scic), + if (ihost->sm.current_state_id != SCIC_RESET) { + dev_warn(&ihost->pdev->dev, "SCIC Controller initialize operation requested " "in invalid state\n"); return SCI_FAILURE_INVALID_STATE; @@ -2156,23 +2137,23 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc sci_change_state(sm, SCIC_INITIALIZING); - sci_init_timer(&scic->phy_timer, phy_startup_timeout); + sci_init_timer(&ihost->phy_timer, phy_startup_timeout); - scic->next_phy_to_start = 0; - scic->phy_startup_timer_pending = false; + ihost->next_phy_to_start = 0; + ihost->phy_startup_timer_pending = false; - scic_sds_controller_initialize_power_control(scic); + scic_sds_controller_initialize_power_control(ihost); /* * There is nothing to do here for B0 since we do not have to * program the AFE registers. * / @todo The AFE settings are supposed to be correct for the B0 but * / presently they seem to be wrong. */ - scic_sds_controller_afe_initialization(scic); + scic_sds_controller_afe_initialization(ihost); /* Take the hardware out of reset */ - writel(0, &scic->smu_registers->soft_reset_control); + writel(0, &ihost->smu_registers->soft_reset_control); /* * / @todo Provide meaningfull error code for hardware failure @@ -2182,7 +2163,7 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc /* Loop until the hardware reports success */ udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); - status = readl(&scic->smu_registers->control_status); + status = readl(&ihost->smu_registers->control_status); if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) break; @@ -2193,32 +2174,32 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc /* * Determine what are the actaul device capacities that the * hardware will support */ - val = readl(&scic->smu_registers->device_context_capacity); + val = readl(&ihost->smu_registers->device_context_capacity); /* Record the smaller of the two capacity values */ - scic->logical_port_entries = min(smu_max_ports(val), SCI_MAX_PORTS); - scic->task_context_entries = min(smu_max_task_contexts(val), SCI_MAX_IO_REQUESTS); - scic->remote_node_entries = min(smu_max_rncs(val), SCI_MAX_REMOTE_DEVICES); + ihost->logical_port_entries = min(smu_max_ports(val), SCI_MAX_PORTS); + ihost->task_context_entries = min(smu_max_task_contexts(val), SCI_MAX_IO_REQUESTS); + ihost->remote_node_entries = min(smu_max_rncs(val), SCI_MAX_REMOTE_DEVICES); /* * Make all PEs that are unassigned match up with the * logical ports */ - for (i = 0; i < scic->logical_port_entries; i++) { + for (i = 0; i < ihost->logical_port_entries; i++) { struct scu_port_task_scheduler_group_registers __iomem - *ptsg = &scic->scu_registers->peg0.ptsg; + *ptsg = &ihost->scu_registers->peg0.ptsg; writel(i, &ptsg->protocol_engine[i]); } /* Initialize hardware PCI Relaxed ordering in DMA engines */ - val = readl(&scic->scu_registers->sdma.pdma_configuration); + val = readl(&ihost->scu_registers->sdma.pdma_configuration); val |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - writel(val, &scic->scu_registers->sdma.pdma_configuration); + writel(val, &ihost->scu_registers->sdma.pdma_configuration); - val = readl(&scic->scu_registers->sdma.cdma_configuration); + val = readl(&ihost->scu_registers->sdma.cdma_configuration); val |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); - writel(val, &scic->scu_registers->sdma.cdma_configuration); + writel(val, &ihost->scu_registers->sdma.cdma_configuration); /* * Initialize the PHYs before the PORTs because the PHY registers @@ -2226,23 +2207,23 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc */ for (i = 0; i < SCI_MAX_PHYS; i++) { result = scic_sds_phy_initialize(&ihost->phys[i], - &scic->scu_registers->peg0.pe[i].tl, - &scic->scu_registers->peg0.pe[i].ll); + &ihost->scu_registers->peg0.pe[i].tl, + &ihost->scu_registers->peg0.pe[i].ll); if (result != SCI_SUCCESS) goto out; } - for (i = 0; i < scic->logical_port_entries; i++) { + for (i = 0; i < ihost->logical_port_entries; i++) { result = scic_sds_port_initialize(&ihost->ports[i], - &scic->scu_registers->peg0.ptsg.port[i], - &scic->scu_registers->peg0.ptsg.protocol_engine, - &scic->scu_registers->peg0.viit[i]); + &ihost->scu_registers->peg0.ptsg.port[i], + &ihost->scu_registers->peg0.ptsg.protocol_engine, + &ihost->scu_registers->peg0.viit[i]); if (result != SCI_SUCCESS) goto out; } - result = scic_sds_port_configuration_agent_initialize(scic, &scic->port_agent); + result = scic_sds_port_configuration_agent_initialize(ihost, &ihost->port_agent); out: /* Advance the controller state machine */ @@ -2256,10 +2237,10 @@ static enum sci_status scic_controller_initialize(struct scic_sds_controller *sc } static enum sci_status scic_user_parameters_set( - struct scic_sds_controller *scic, + struct isci_host *ihost, union scic_user_parameters *scic_parms) { - u32 state = scic->sm.current_state_id; + u32 state = ihost->sm.current_state_id; if (state == SCIC_RESET || state == SCIC_INITIALIZING || @@ -2301,7 +2282,7 @@ static enum sci_status scic_user_parameters_set( (scic_parms->sds1.no_outbound_task_timeout == 0)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - memcpy(&scic->user_parameters, scic_parms, sizeof(*scic_parms)); + memcpy(&ihost->user_parameters, scic_parms, sizeof(*scic_parms)); return SCI_SUCCESS; } @@ -2309,40 +2290,40 @@ static enum sci_status scic_user_parameters_set( return SCI_FAILURE_INVALID_STATE; } -static int scic_controller_mem_init(struct scic_sds_controller *scic) +static int scic_controller_mem_init(struct isci_host *ihost) { - struct device *dev = scic_to_dev(scic); + struct device *dev = &ihost->pdev->dev; dma_addr_t dma; size_t size; int err; size = SCU_MAX_COMPLETION_QUEUE_ENTRIES * sizeof(u32); - scic->completion_queue = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); - if (!scic->completion_queue) + ihost->completion_queue = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); + if (!ihost->completion_queue) return -ENOMEM; - writel(lower_32_bits(dma), &scic->smu_registers->completion_queue_lower); - writel(upper_32_bits(dma), &scic->smu_registers->completion_queue_upper); + writel(lower_32_bits(dma), &ihost->smu_registers->completion_queue_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->completion_queue_upper); - size = scic->remote_node_entries * sizeof(union scu_remote_node_context); - scic->remote_node_context_table = dmam_alloc_coherent(dev, size, &dma, + size = ihost->remote_node_entries * sizeof(union scu_remote_node_context); + ihost->remote_node_context_table = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); - if (!scic->remote_node_context_table) + if (!ihost->remote_node_context_table) return -ENOMEM; - writel(lower_32_bits(dma), &scic->smu_registers->remote_node_context_lower); - writel(upper_32_bits(dma), &scic->smu_registers->remote_node_context_upper); + writel(lower_32_bits(dma), &ihost->smu_registers->remote_node_context_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->remote_node_context_upper); - size = scic->task_context_entries * sizeof(struct scu_task_context), - scic->task_context_table = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); - if (!scic->task_context_table) + size = ihost->task_context_entries * sizeof(struct scu_task_context), + ihost->task_context_table = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); + if (!ihost->task_context_table) return -ENOMEM; - scic->task_context_dma = dma; - writel(lower_32_bits(dma), &scic->smu_registers->host_task_table_lower); - writel(upper_32_bits(dma), &scic->smu_registers->host_task_table_upper); + ihost->task_context_dma = dma; + writel(lower_32_bits(dma), &ihost->smu_registers->host_task_table_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->host_task_table_upper); - err = scic_sds_unsolicited_frame_control_construct(scic); + err = scic_sds_unsolicited_frame_control_construct(ihost); if (err) return err; @@ -2350,112 +2331,112 @@ static int scic_controller_mem_init(struct scic_sds_controller *scic) * Inform the silicon as to the location of the UF headers and * address table. */ - writel(lower_32_bits(scic->uf_control.headers.physical_address), - &scic->scu_registers->sdma.uf_header_base_address_lower); - writel(upper_32_bits(scic->uf_control.headers.physical_address), - &scic->scu_registers->sdma.uf_header_base_address_upper); + writel(lower_32_bits(ihost->uf_control.headers.physical_address), + &ihost->scu_registers->sdma.uf_header_base_address_lower); + writel(upper_32_bits(ihost->uf_control.headers.physical_address), + &ihost->scu_registers->sdma.uf_header_base_address_upper); - writel(lower_32_bits(scic->uf_control.address_table.physical_address), - &scic->scu_registers->sdma.uf_address_table_lower); - writel(upper_32_bits(scic->uf_control.address_table.physical_address), - &scic->scu_registers->sdma.uf_address_table_upper); + writel(lower_32_bits(ihost->uf_control.address_table.physical_address), + &ihost->scu_registers->sdma.uf_address_table_lower); + writel(upper_32_bits(ihost->uf_control.address_table.physical_address), + &ihost->scu_registers->sdma.uf_address_table_upper); return 0; } -int isci_host_init(struct isci_host *isci_host) +int isci_host_init(struct isci_host *ihost) { int err = 0, i; enum sci_status status; union scic_oem_parameters oem; union scic_user_parameters scic_user_params; - struct isci_pci_info *pci_info = to_pci_info(isci_host->pdev); + struct isci_pci_info *pci_info = to_pci_info(ihost->pdev); - spin_lock_init(&isci_host->state_lock); - spin_lock_init(&isci_host->scic_lock); - init_waitqueue_head(&isci_host->eventq); + spin_lock_init(&ihost->state_lock); + spin_lock_init(&ihost->scic_lock); + init_waitqueue_head(&ihost->eventq); - isci_host_change_state(isci_host, isci_starting); + isci_host_change_state(ihost, isci_starting); - status = scic_controller_construct(&isci_host->sci, scu_base(isci_host), - smu_base(isci_host)); + status = scic_controller_construct(ihost, scu_base(ihost), + smu_base(ihost)); if (status != SCI_SUCCESS) { - dev_err(&isci_host->pdev->dev, + dev_err(&ihost->pdev->dev, "%s: scic_controller_construct failed - status = %x\n", __func__, status); return -ENODEV; } - isci_host->sas_ha.dev = &isci_host->pdev->dev; - isci_host->sas_ha.lldd_ha = isci_host; + ihost->sas_ha.dev = &ihost->pdev->dev; + ihost->sas_ha.lldd_ha = ihost; /* * grab initial values stored in the controller object for OEM and USER * parameters */ - isci_user_parameters_get(isci_host, &scic_user_params); - status = scic_user_parameters_set(&isci_host->sci, + isci_user_parameters_get(ihost, &scic_user_params); + status = scic_user_parameters_set(ihost, &scic_user_params); if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: scic_user_parameters_set failed\n", __func__); return -ENODEV; } - scic_oem_parameters_get(&isci_host->sci, &oem); + scic_oem_parameters_get(ihost, &oem); /* grab any OEM parameters specified in orom */ if (pci_info->orom) { status = isci_parse_oem_parameters(&oem, pci_info->orom, - isci_host->id); + ihost->id); if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "parsing firmware oem parameters failed\n"); return -EINVAL; } } - status = scic_oem_parameters_set(&isci_host->sci, &oem); + status = scic_oem_parameters_set(ihost, &oem); if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: scic_oem_parameters_set failed\n", __func__); return -ENODEV; } - tasklet_init(&isci_host->completion_tasklet, - isci_host_completion_routine, (unsigned long)isci_host); + tasklet_init(&ihost->completion_tasklet, + isci_host_completion_routine, (unsigned long)ihost); - INIT_LIST_HEAD(&isci_host->requests_to_complete); - INIT_LIST_HEAD(&isci_host->requests_to_errorback); + INIT_LIST_HEAD(&ihost->requests_to_complete); + INIT_LIST_HEAD(&ihost->requests_to_errorback); - spin_lock_irq(&isci_host->scic_lock); - status = scic_controller_initialize(&isci_host->sci); - spin_unlock_irq(&isci_host->scic_lock); + spin_lock_irq(&ihost->scic_lock); + status = scic_controller_initialize(ihost); + spin_unlock_irq(&ihost->scic_lock); if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: scic_controller_initialize failed -" " status = 0x%x\n", __func__, status); return -ENODEV; } - err = scic_controller_mem_init(&isci_host->sci); + err = scic_controller_mem_init(ihost); if (err) return err; for (i = 0; i < SCI_MAX_PORTS; i++) - isci_port_init(&isci_host->ports[i], isci_host, i); + isci_port_init(&ihost->ports[i], ihost, i); for (i = 0; i < SCI_MAX_PHYS; i++) - isci_phy_init(&isci_host->phys[i], isci_host, i); + isci_phy_init(&ihost->phys[i], ihost, i); for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { - struct isci_remote_device *idev = &isci_host->devices[i]; + struct isci_remote_device *idev = &ihost->devices[i]; INIT_LIST_HEAD(&idev->reqs_in_process); INIT_LIST_HEAD(&idev->node); @@ -2465,63 +2446,62 @@ int isci_host_init(struct isci_host *isci_host) struct isci_request *ireq; dma_addr_t dma; - ireq = dmam_alloc_coherent(&isci_host->pdev->dev, + ireq = dmam_alloc_coherent(&ihost->pdev->dev, sizeof(struct isci_request), &dma, GFP_KERNEL); if (!ireq) return -ENOMEM; - ireq->tc = &isci_host->sci.task_context_table[i]; - ireq->owning_controller = &isci_host->sci; + ireq->tc = &ihost->task_context_table[i]; + ireq->owning_controller = ihost; spin_lock_init(&ireq->state_lock); ireq->request_daddr = dma; - ireq->isci_host = isci_host; - - isci_host->reqs[i] = ireq; + ireq->isci_host = ihost; + ihost->reqs[i] = ireq; } return 0; } -void scic_sds_controller_link_up(struct scic_sds_controller *scic, +void scic_sds_controller_link_up(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy) { - switch (scic->sm.current_state_id) { + switch (ihost->sm.current_state_id) { case SCIC_STARTING: - sci_del_timer(&scic->phy_timer); - scic->phy_startup_timer_pending = false; - scic->port_agent.link_up_handler(scic, &scic->port_agent, + sci_del_timer(&ihost->phy_timer); + ihost->phy_startup_timer_pending = false; + ihost->port_agent.link_up_handler(ihost, &ihost->port_agent, iport, iphy); - scic_sds_controller_start_next_phy(scic); + scic_sds_controller_start_next_phy(ihost); break; case SCIC_READY: - scic->port_agent.link_up_handler(scic, &scic->port_agent, + ihost->port_agent.link_up_handler(ihost, &ihost->port_agent, iport, iphy); break; default: - dev_dbg(scic_to_dev(scic), + dev_dbg(&ihost->pdev->dev, "%s: SCIC Controller linkup event from phy %d in " "unexpected state %d\n", __func__, iphy->phy_index, - scic->sm.current_state_id); + ihost->sm.current_state_id); } } -void scic_sds_controller_link_down(struct scic_sds_controller *scic, +void scic_sds_controller_link_down(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy) { - switch (scic->sm.current_state_id) { + switch (ihost->sm.current_state_id) { case SCIC_STARTING: case SCIC_READY: - scic->port_agent.link_down_handler(scic, &scic->port_agent, + ihost->port_agent.link_down_handler(ihost, &ihost->port_agent, iport, iphy); break; default: - dev_dbg(scic_to_dev(scic), + dev_dbg(&ihost->pdev->dev, "%s: SCIC Controller linkdown event from phy %d in " "unexpected state %d\n", __func__, iphy->phy_index, - scic->sm.current_state_id); + ihost->sm.current_state_id); } } @@ -2530,14 +2510,13 @@ void scic_sds_controller_link_down(struct scic_sds_controller *scic, * controller are still in the stopping state. * */ -static bool scic_sds_controller_has_remote_devices_stopping( - struct scic_sds_controller *controller) +static bool scic_sds_controller_has_remote_devices_stopping(struct isci_host *ihost) { u32 index; - for (index = 0; index < controller->remote_node_entries; index++) { - if ((controller->device_table[index] != NULL) && - (controller->device_table[index]->sm.current_state_id == SCI_DEV_STOPPING)) + for (index = 0; index < ihost->remote_node_entries; index++) { + if ((ihost->device_table[index] != NULL) && + (ihost->device_table[index]->sm.current_state_id == SCI_DEV_STOPPING)) return true; } @@ -2548,20 +2527,20 @@ static bool scic_sds_controller_has_remote_devices_stopping( * This method is called by the remote device to inform the controller * object that the remote device has stopped. */ -void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, +void scic_sds_controller_remote_device_stopped(struct isci_host *ihost, struct isci_remote_device *idev) { - if (scic->sm.current_state_id != SCIC_STOPPING) { - dev_dbg(scic_to_dev(scic), + if (ihost->sm.current_state_id != SCIC_STOPPING) { + dev_dbg(&ihost->pdev->dev, "SCIC Controller 0x%p remote device stopped event " "from device 0x%p in unexpected state %d\n", - scic, idev, - scic->sm.current_state_id); + ihost, idev, + ihost->sm.current_state_id); return; } - if (!scic_sds_controller_has_remote_devices_stopping(scic)) { - sci_change_state(&scic->sm, SCIC_STOPPED); + if (!scic_sds_controller_has_remote_devices_stopping(ihost)) { + sci_change_state(&ihost->sm, SCIC_STOPPED); } } @@ -2573,32 +2552,32 @@ void scic_sds_controller_remote_device_stopped(struct scic_sds_controller *scic, * */ void scic_sds_controller_post_request( - struct scic_sds_controller *scic, + struct isci_host *ihost, u32 request) { - dev_dbg(scic_to_dev(scic), + dev_dbg(&ihost->pdev->dev, "%s: SCIC Controller 0x%p post request 0x%08x\n", __func__, - scic, + ihost, request); - writel(request, &scic->smu_registers->post_context_port); + writel(request, &ihost->smu_registers->post_context_port); } -struct isci_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 io_tag) +struct isci_request *scic_request_by_tag(struct isci_host *ihost, u16 io_tag) { u16 task_index; u16 task_sequence; task_index = ISCI_TAG_TCI(io_tag); - if (task_index < scic->task_context_entries) { - struct isci_request *ireq = scic_to_ihost(scic)->reqs[task_index]; + if (task_index < ihost->task_context_entries) { + struct isci_request *ireq = ihost->reqs[task_index]; if (test_bit(IREQ_ACTIVE, &ireq->flags)) { task_sequence = ISCI_TAG_SEQ(io_tag); - if (task_sequence == scic->io_request_sequence[task_index]) + if (task_sequence == ihost->io_request_sequence[task_index]) return ireq; } } @@ -2621,7 +2600,7 @@ struct isci_request *scic_request_by_tag(struct scic_sds_controller *scic, u16 i * node index available. */ enum sci_status scic_sds_controller_allocate_remote_node_context( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, u16 *node_id) { @@ -2629,11 +2608,11 @@ enum sci_status scic_sds_controller_allocate_remote_node_context( u32 remote_node_count = scic_sds_remote_device_node_count(idev); node_index = scic_sds_remote_node_table_allocate_remote_node( - &scic->available_remote_nodes, remote_node_count + &ihost->available_remote_nodes, remote_node_count ); if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { - scic->device_table[node_index] = idev; + ihost->device_table[node_index] = idev; *node_id = node_index; @@ -2653,17 +2632,17 @@ enum sci_status scic_sds_controller_allocate_remote_node_context( * */ void scic_sds_controller_free_remote_node_context( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, u16 node_id) { u32 remote_node_count = scic_sds_remote_device_node_count(idev); - if (scic->device_table[node_id] == idev) { - scic->device_table[node_id] = NULL; + if (ihost->device_table[node_id] == idev) { + ihost->device_table[node_id] = NULL; scic_sds_remote_node_table_release_remote_node_index( - &scic->available_remote_nodes, remote_node_count, node_id + &ihost->available_remote_nodes, remote_node_count, node_id ); } } @@ -2677,14 +2656,14 @@ void scic_sds_controller_free_remote_node_context( * union scu_remote_node_context* */ union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct scic_sds_controller *scic, + struct isci_host *ihost, u16 node_id ) { if ( - (node_id < scic->remote_node_entries) - && (scic->device_table[node_id] != NULL) + (node_id < ihost->remote_node_entries) + && (ihost->device_table[node_id] != NULL) ) { - return &scic->remote_node_context_table[node_id]; + return &ihost->remote_node_context_table[node_id]; } return NULL; @@ -2722,13 +2701,13 @@ void scic_sds_controller_copy_sata_response( * */ void scic_sds_controller_release_frame( - struct scic_sds_controller *scic, + struct isci_host *ihost, u32 frame_index) { if (scic_sds_unsolicited_frame_control_release_frame( - &scic->uf_control, frame_index) == true) - writel(scic->uf_control.get, - &scic->scu_registers->sdma.unsolicited_frame_get_pointer); + &ihost->uf_control, frame_index) == true) + writel(ihost->uf_control.get, + &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); } void isci_tci_free(struct isci_host *ihost, u16 tci) @@ -2757,7 +2736,7 @@ u16 isci_alloc_tag(struct isci_host *ihost) { if (isci_tci_space(ihost)) { u16 tci = isci_tci_alloc(ihost); - u8 seq = ihost->sci.io_request_sequence[tci]; + u8 seq = ihost->io_request_sequence[tci]; return ISCI_TAG(seq, tci); } @@ -2767,7 +2746,6 @@ u16 isci_alloc_tag(struct isci_host *ihost) enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) { - struct scic_sds_controller *scic = &ihost->sci; u16 tci = ISCI_TAG_TCI(io_tag); u16 seq = ISCI_TAG_SEQ(io_tag); @@ -2775,8 +2753,8 @@ enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) if (isci_tci_active(ihost) == 0) return SCI_FAILURE_INVALID_IO_TAG; - if (seq == scic->io_request_sequence[tci]) { - scic->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1); + if (seq == ihost->io_request_sequence[tci]) { + ihost->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1); isci_tci_free(ihost, tci); @@ -2797,23 +2775,23 @@ enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) * @io_tag: This parameter specifies a previously allocated IO tag that the * user desires to be utilized for this request. */ -enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, +enum sci_status scic_controller_start_io(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; - if (scic->sm.current_state_id != SCIC_READY) { - dev_warn(scic_to_dev(scic), "invalid state to start I/O"); + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "invalid state to start I/O"); return SCI_FAILURE_INVALID_STATE; } - status = scic_sds_remote_device_start_io(scic, idev, ireq); + status = scic_sds_remote_device_start_io(ihost, idev, ireq); if (status != SCI_SUCCESS) return status; set_bit(IREQ_ACTIVE, &ireq->flags); - scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(ireq)); + scic_sds_controller_post_request(ihost, scic_sds_request_get_post_context(ireq)); return SCI_SUCCESS; } @@ -2834,14 +2812,14 @@ enum sci_status scic_controller_start_io(struct scic_sds_controller *scic, * for the request. Determine the failure situations and return values. */ enum sci_status scic_controller_terminate_request( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; - if (scic->sm.current_state_id != SCIC_READY) { - dev_warn(scic_to_dev(scic), + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "invalid state to terminate request\n"); return SCI_FAILURE_INVALID_STATE; } @@ -2854,7 +2832,7 @@ enum sci_status scic_controller_terminate_request( * Utilize the original post context command and or in the POST_TC_ABORT * request sub-type. */ - scic_sds_controller_post_request(scic, + scic_sds_controller_post_request(ihost, scic_sds_request_get_post_context(ireq) | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); return SCI_SUCCESS; @@ -2872,19 +2850,19 @@ enum sci_status scic_controller_terminate_request( * @io_request: the handle to the io request object to complete. */ enum sci_status scic_controller_complete_io( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; u16 index; - switch (scic->sm.current_state_id) { + switch (ihost->sm.current_state_id) { case SCIC_STOPPING: /* XXX: Implement this function */ return SCI_FAILURE; case SCIC_READY: - status = scic_sds_remote_device_complete_io(scic, idev, ireq); + status = scic_sds_remote_device_complete_io(ihost, idev, ireq); if (status != SCI_SUCCESS) return status; @@ -2892,7 +2870,7 @@ enum sci_status scic_controller_complete_io( clear_bit(IREQ_ACTIVE, &ireq->flags); return SCI_SUCCESS; default: - dev_warn(scic_to_dev(scic), "invalid state to complete I/O"); + dev_warn(&ihost->pdev->dev, "invalid state to complete I/O"); return SCI_FAILURE_INVALID_STATE; } @@ -2900,15 +2878,15 @@ enum sci_status scic_controller_complete_io( enum sci_status scic_controller_continue_io(struct isci_request *ireq) { - struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_host *ihost = ireq->owning_controller; - if (scic->sm.current_state_id != SCIC_READY) { - dev_warn(scic_to_dev(scic), "invalid state to continue I/O"); + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "invalid state to continue I/O"); return SCI_FAILURE_INVALID_STATE; } set_bit(IREQ_ACTIVE, &ireq->flags); - scic_sds_controller_post_request(scic, scic_sds_request_get_post_context(ireq)); + scic_sds_controller_post_request(ihost, scic_sds_request_get_post_context(ireq)); return SCI_SUCCESS; } @@ -2922,21 +2900,21 @@ enum sci_status scic_controller_continue_io(struct isci_request *ireq) * @task_request: the handle to the task request object to start. */ enum sci_task_status scic_controller_start_task( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { enum sci_status status; - if (scic->sm.current_state_id != SCIC_READY) { - dev_warn(scic_to_dev(scic), + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "%s: SCIC Controller starting task from invalid " "state\n", __func__); return SCI_TASK_FAILURE_INVALID_STATE; } - status = scic_sds_remote_device_start_task(scic, idev, ireq); + status = scic_sds_remote_device_start_task(ihost, idev, ireq); switch (status) { case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: set_bit(IREQ_ACTIVE, &ireq->flags); @@ -2950,7 +2928,7 @@ enum sci_task_status scic_controller_start_task( case SCI_SUCCESS: set_bit(IREQ_ACTIVE, &ireq->flags); - scic_sds_controller_post_request(scic, + scic_sds_controller_post_request(ihost, scic_sds_request_get_post_context(ireq)); break; default: diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index ca2e3b0..013f672 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -106,7 +106,7 @@ struct scic_power_control { }; struct scic_sds_port_configuration_agent; -typedef void (*port_config_fn)(struct scic_sds_controller *, +typedef void (*port_config_fn)(struct isci_host *, struct scic_sds_port_configuration_agent *, struct isci_port *, struct isci_phy *); @@ -124,171 +124,66 @@ struct scic_sds_port_configuration_agent { }; /** - * struct scic_sds_controller - - * - * This structure represents the SCU controller object. + * isci_host - primary host/controller object + * @timer: timeout start/stop operations + * @device_table: rni (hw remote node index) to remote device lookup table + * @available_remote_nodes: rni allocator + * @power_control: manage device spin up + * @io_request_sequence: generation number for tci's (task contexts) + * @task_context_table: hw task context table + * @remote_node_context_table: hw remote node context table + * @completion_queue: hw-producer driver-consumer communication ring + * @completion_queue_get: tracks the driver 'head' of the ring to notify hw + * @logical_port_entries: min({driver|silicon}-supported-port-count) + * @remote_node_entries: min({driver|silicon}-supported-node-count) + * @task_context_entries: min({driver|silicon}-supported-task-count) + * @phy_timer: phy startup timer + * @invalid_phy_mask: if an invalid_link_up notification is reported a bit for + * the phy index is set so further notifications are not + * made. Once the phy reports link up and is made part of a + * port then this bit is cleared. + */ -struct scic_sds_controller { - /** - * This field contains the information for the base controller state - * machine. - */ +struct isci_host { struct sci_base_state_machine sm; - - /** - * Timer for controller start/stop operations. - */ + /* XXX can we time this externally */ struct sci_timer timer; - - /** - * This field contains the user parameters to be utilized for this - * core controller object. - */ + /* XXX drop reference module params directly */ union scic_user_parameters user_parameters; - - /** - * This field contains the OEM parameters to be utilized for this - * core controller object. - */ + /* XXX no need to be a union */ union scic_oem_parameters oem_parameters; - - /** - * This field contains the port configuration agent for this controller. - */ struct scic_sds_port_configuration_agent port_agent; - - /** - * This field is the array of device objects that are currently constructed - * for this controller object. This table is used as a fast lookup of device - * objects that need to handle device completion notifications from the - * hardware. The table is RNi based. - */ struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; - - /** - * This field is the free RNi data structure - */ struct scic_remote_node_table available_remote_nodes; - - /** - * This filed is the struct scic_power_control data used to controll when direct - * attached devices can consume power. - */ struct scic_power_control power_control; - - /* sequence number per tci */ u8 io_request_sequence[SCI_MAX_IO_REQUESTS]; - - /** - * This field is a pointer to the memory allocated by the driver for the task - * context table. This data is shared between the hardware and software. - */ struct scu_task_context *task_context_table; dma_addr_t task_context_dma; - - /** - * This field is a pointer to the memory allocated by the driver for the - * remote node context table. This table is shared between the hardware and - * software. - */ union scu_remote_node_context *remote_node_context_table; - - /** - * This field is a pointer to the completion queue. This memory is - * written to by the hardware and read by the software. - */ u32 *completion_queue; - - /** - * This field is the software copy of the completion queue get pointer. The - * controller object writes this value to the hardware after processing the - * completion entries. - */ u32 completion_queue_get; - - /** - * This field is the minimum of the number of hardware supported port entries - * and the software requested port entries. - */ u32 logical_port_entries; - - /** - * This field is the minimum number of devices supported by the hardware and - * the number of devices requested by the software. - */ u32 remote_node_entries; - - /** - * This field is the minimum number of IO requests supported by the hardware - * and the number of IO requests requested by the software. - */ u32 task_context_entries; - - /** - * This object contains all of the unsolicited frame specific - * data utilized by the core controller. - */ struct scic_sds_unsolicited_frame_control uf_control; - /* Phy Startup Data */ - /** - * Timer for controller phy request startup. On controller start the - * controller will start each PHY individually in order of phy index. - */ + /* phy startup */ struct sci_timer phy_timer; - - /** - * This field is set when the phy_timer is running and is cleared when - * the phy_timer is stopped. - */ + /* XXX kill */ bool phy_startup_timer_pending; - - /** - * This field is the index of the next phy start. It is initialized to 0 and - * increments for each phy index that is started. - */ u32 next_phy_to_start; - - /** - * This field controlls the invalid link up notifications to the SCI_USER. If - * an invalid_link_up notification is reported a bit for the PHY index is set - * so further notifications are not made. Once the PHY object reports link up - * and is made part of a port then this bit for the PHY index is cleared. - */ u8 invalid_phy_mask; - /* - * This field saves the current interrupt coalescing number of the controller. - */ + /* TODO attempt dynamic interrupt coalescing scheme */ u16 interrupt_coalesce_number; - - /* - * This field saves the current interrupt coalescing timeout value in microseconds. - */ u32 interrupt_coalesce_timeout; - - /** - * This field is a pointer to the memory mapped register space for the - * struct smu_registers. - */ struct smu_registers __iomem *smu_registers; - - /** - * This field is a pointer to the memory mapped register space for the - * struct scu_registers. - */ struct scu_registers __iomem *scu_registers; -}; - -struct isci_host { - struct scic_sds_controller sci; u16 tci_head; u16 tci_tail; u16 tci_pool[SCI_MAX_IO_REQUESTS]; - union scic_oem_parameters oem_parameters; - int id; /* unique within a given pci device */ struct isci_phy phys[SCI_MAX_PHYS]; struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ @@ -464,14 +359,6 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev) return dev->port->ha->lldd_ha; } -static inline struct isci_host *scic_to_ihost(struct scic_sds_controller *scic) -{ - /* XXX delete after merging scic_sds_contoller and isci_host */ - struct isci_host *ihost = container_of(scic, typeof(*ihost), sci); - - return ihost; -} - /** * scic_sds_controller_get_protocol_engine_group() - * @@ -518,11 +405,6 @@ static inline int scic_sds_remote_device_node_count(struct isci_remote_device *i #define scic_sds_controller_clear_invalid_phy(controller, phy) \ ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) -static inline struct device *scic_to_dev(struct scic_sds_controller *scic) -{ - return &scic_to_ihost(scic)->pdev->dev; -} - static inline struct device *sciphy_to_dev(struct isci_phy *iphy) { @@ -578,54 +460,54 @@ static inline bool is_c0(void) return isci_si_rev > ISCI_SI_REVB0; } -void scic_sds_controller_post_request(struct scic_sds_controller *scic, +void scic_sds_controller_post_request(struct isci_host *ihost, u32 request); -void scic_sds_controller_release_frame(struct scic_sds_controller *scic, +void scic_sds_controller_release_frame(struct isci_host *ihost, u32 frame_index); void scic_sds_controller_copy_sata_response(void *response_buffer, void *frame_header, void *frame_buffer); -enum sci_status scic_sds_controller_allocate_remote_node_context(struct scic_sds_controller *scic, +enum sci_status scic_sds_controller_allocate_remote_node_context(struct isci_host *ihost, struct isci_remote_device *idev, u16 *node_id); void scic_sds_controller_free_remote_node_context( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, u16 node_id); union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct scic_sds_controller *scic, + struct isci_host *ihost, u16 node_id); -struct isci_request *scic_request_by_tag(struct scic_sds_controller *scic, +struct isci_request *scic_request_by_tag(struct isci_host *ihost, u16 io_tag); void scic_sds_controller_power_control_queue_insert( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_phy *iphy); void scic_sds_controller_power_control_queue_remove( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_phy *iphy); void scic_sds_controller_link_up( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); void scic_sds_controller_link_down( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); void scic_sds_controller_remote_device_stopped( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev); void scic_sds_controller_copy_task_context( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_request *ireq); -void scic_sds_controller_register_setup(struct scic_sds_controller *scic); +void scic_sds_controller_register_setup(struct isci_host *ihost); enum sci_status scic_controller_continue_io(struct isci_request *ireq); int isci_host_scan_finished(struct Scsi_Host *, unsigned long); @@ -655,25 +537,25 @@ void isci_host_remote_device_start_complete( enum sci_status); void scic_controller_disable_interrupts( - struct scic_sds_controller *scic); + struct isci_host *ihost); enum sci_status scic_controller_start_io( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_task_status scic_controller_start_task( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_controller_terminate_request( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_controller_complete_io( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); @@ -681,6 +563,6 @@ void scic_sds_port_configuration_agent_construct( struct scic_sds_port_configuration_agent *port_agent); enum sci_status scic_sds_port_configuration_agent_initialize( - struct scic_sds_controller *controller, + struct isci_host *ihost, struct scic_sds_port_configuration_agent *port_agent); #endif diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index bbfb6e5..68ca1a4 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -548,13 +548,13 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic static void __devexit isci_pci_remove(struct pci_dev *pdev) { - struct isci_host *isci_host; + struct isci_host *ihost; int i; - for_each_isci_host(i, isci_host, pdev) { - isci_unregister(isci_host); - isci_host_deinit(isci_host); - scic_controller_disable_interrupts(&isci_host->sci); + for_each_isci_host(i, ihost, pdev) { + isci_unregister(ihost); + isci_host_deinit(ihost); + scic_controller_disable_interrupts(ihost); } } diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index fd0e973..ca96b5a 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -112,13 +112,13 @@ static enum sci_status scic_sds_phy_link_layer_initialization(struct isci_phy *iphy, struct scu_link_layer_registers __iomem *link_layer_registers) { - struct scic_sds_controller *scic = + struct isci_host *ihost = iphy->owning_port->owning_controller; int phy_idx = iphy->phy_index; struct sci_phy_user_params *phy_user = - &scic->user_parameters.sds1.phys[phy_idx]; + &ihost->user_parameters.sds1.phys[phy_idx]; struct sci_phy_oem_params *phy_oem = - &scic->oem_parameters.sds1.phys[phy_idx]; + &ihost->oem_parameters.sds1.phys[phy_idx]; u32 phy_configuration; struct scic_phy_cap phy_cap; u32 parity_check = 0; @@ -169,7 +169,7 @@ scic_sds_phy_link_layer_initialization(struct isci_phy *iphy, phy_cap.gen3_no_ssc = 1; phy_cap.gen2_no_ssc = 1; phy_cap.gen1_no_ssc = 1; - if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { + if (ihost->oem_parameters.sds1.controller.do_enable_ssc == true) { phy_cap.gen3_ssc = 1; phy_cap.gen2_ssc = 1; phy_cap.gen1_ssc = 1; @@ -216,7 +216,7 @@ scic_sds_phy_link_layer_initialization(struct isci_phy *iphy, &iphy->link_layer_registers->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, - (u8)scic->user_parameters.sds1.no_outbound_task_timeout); + (u8)ihost->user_parameters.sds1.no_outbound_task_timeout); switch(phy_user->max_speed_generation) { case SCIC_SDS_PARM_GEN3_SPEED: @@ -255,7 +255,7 @@ static void phy_sata_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; struct isci_phy *iphy = container_of(tmr, typeof(*iphy), sata_timer); - struct isci_host *ihost = scic_to_ihost(iphy->owning_port->owning_controller); + struct isci_host *ihost = iphy->owning_port->owning_controller; unsigned long flags; spin_lock_irqsave(&ihost->scic_lock, flags); @@ -890,7 +890,7 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, u32 frame_index) { enum scic_sds_phy_states state = iphy->sm.current_state_id; - struct scic_sds_controller *scic = iphy->owning_port->owning_controller; + struct isci_host *ihost = iphy->owning_port->owning_controller; enum sci_status result; unsigned long flags; @@ -899,7 +899,7 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, u32 *frame_words; struct sas_identify_frame iaf; - result = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + result = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_words); @@ -933,7 +933,7 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, "unexpected frame id %x\n", __func__, frame_index); - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return result; } case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: { @@ -950,7 +950,7 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, if ((frame_header->fis_type == FIS_REGD2H) && !(frame_header->status & ATA_BUSY)) { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&fis_frame_data); @@ -971,7 +971,7 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, __func__, frame_index); /* Regardless of the result we are done with this frame with it */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return result; } @@ -994,33 +994,33 @@ static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_state_m static void scic_sds_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - struct scic_sds_controller *scic = iphy->owning_port->owning_controller; + struct isci_host *ihost = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_insert(scic, iphy); + scic_sds_controller_power_control_queue_insert(ihost, iphy); } static void scic_sds_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - struct scic_sds_controller *scic = iphy->owning_port->owning_controller; + struct isci_host *ihost = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_remove(scic, iphy); + scic_sds_controller_power_control_queue_remove(ihost, iphy); } static void scic_sds_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - struct scic_sds_controller *scic = iphy->owning_port->owning_controller; + struct isci_host *ihost = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_insert(scic, iphy); + scic_sds_controller_power_control_queue_insert(ihost, iphy); } static void scic_sds_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - struct scic_sds_controller *scic = iphy->owning_port->owning_controller; + struct isci_host *ihost = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_remove(scic, iphy); + scic_sds_controller_power_control_queue_remove(ihost, iphy); } static void scic_sds_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm) @@ -1313,7 +1313,7 @@ void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) u64 sci_sas_addr; __be64 sas_addr; - scic_oem_parameters_get(&ihost->sci, &oem); + scic_oem_parameters_get(ihost, &oem); sci_sas_addr = oem.sds1.phys[index].sas_address.high; sci_sas_addr <<= 32; sci_sas_addr |= oem.sds1.phys[index].sas_address.low; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index df37b1b..c434d5a 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -365,11 +365,11 @@ static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *i "%s: isci_port = %p\n", __func__, isci_port); } -static void isci_port_stop_complete(struct scic_sds_controller *scic, +static void isci_port_stop_complete(struct isci_host *ihost, struct isci_port *iport, enum sci_status completion_status) { - dev_dbg(&scic_to_ihost(scic)->pdev->dev, "Port stop complete\n"); + dev_dbg(&ihost->pdev->dev, "Port stop complete\n"); } /** @@ -541,8 +541,7 @@ static enum sci_status scic_sds_port_clear_phy(struct isci_port *iport, /* Make sure that this phy is part of this port */ if (iport->phy_table[iphy->phy_index] == iphy && phy_get_non_dummy_port(iphy) == iport) { - struct scic_sds_controller *scic = iport->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = iport->owning_controller; /* Yep it is assigned to this port so remove it */ scic_sds_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS]); @@ -654,10 +653,10 @@ static void scic_sds_port_construct_dummy_rnc(struct isci_port *iport, u16 rni) */ static void scic_sds_port_construct_dummy_task(struct isci_port *iport, u16 tag) { - struct scic_sds_controller *scic = iport->owning_controller; + struct isci_host *ihost = iport->owning_controller; struct scu_task_context *task_context; - task_context = &scic->task_context_table[ISCI_TAG_TCI(tag)]; + task_context = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; memset(task_context, 0, sizeof(struct scu_task_context)); task_context->initiator_request = 1; @@ -674,13 +673,13 @@ static void scic_sds_port_construct_dummy_task(struct isci_port *iport, u16 tag) static void scic_sds_port_destroy_dummy_resources(struct isci_port *iport) { - struct scic_sds_controller *scic = iport->owning_controller; + struct isci_host *ihost = iport->owning_controller; if (iport->reserved_tag != SCI_CONTROLLER_INVALID_IO_TAG) - isci_free_tag(scic_to_ihost(scic), iport->reserved_tag); + isci_free_tag(ihost, iport->reserved_tag); if (iport->reserved_rni != SCU_DUMMY_INDEX) - scic_sds_remote_node_table_release_remote_node_index(&scic->available_remote_nodes, + scic_sds_remote_node_table_release_remote_node_index(&ihost->available_remote_nodes, 1, iport->reserved_rni); iport->reserved_rni = SCU_DUMMY_INDEX; @@ -749,15 +748,14 @@ static void scic_sds_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user) { - struct scic_sds_controller *scic = iport->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = iport->owning_controller; if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) scic_sds_phy_resume(iphy); iport->active_phy_mask |= 1 << iphy->phy_index; - scic_sds_controller_clear_invalid_phy(scic, iphy); + scic_sds_controller_clear_invalid_phy(ihost, iphy); if (do_notify_user == true) isci_port_link_up(ihost, iport, iphy); @@ -767,8 +765,7 @@ void scic_sds_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user) { - struct scic_sds_controller *scic = scic_sds_port_get_controller(iport); - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = scic_sds_port_get_controller(iport); iport->active_phy_mask &= ~(1 << iphy->phy_index); @@ -793,16 +790,16 @@ void scic_sds_port_deactivate_phy(struct isci_port *iport, static void scic_sds_port_invalid_link_up(struct isci_port *iport, struct isci_phy *iphy) { - struct scic_sds_controller *scic = iport->owning_controller; + struct isci_host *ihost = iport->owning_controller; /* * Check to see if we have alreay reported this link as bad and if * not go ahead and tell the SCI_USER that we have discovered an * invalid link. */ - if ((scic->invalid_phy_mask & (1 << iphy->phy_index)) == 0) { - scic_sds_controller_set_invalid_phy(scic, iphy); - dev_warn(&scic_to_ihost(scic)->pdev->dev, "Invalid link up!\n"); + if ((ihost->invalid_phy_mask & (1 << iphy->phy_index)) == 0) { + scic_sds_controller_set_invalid_phy(ihost, iphy); + dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); } } @@ -931,7 +928,7 @@ static void port_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; struct isci_port *iport = container_of(tmr, typeof(*iport), timer); - struct isci_host *ihost = scic_to_ihost(iport->owning_controller); + struct isci_host *ihost = iport->owning_controller; unsigned long flags; u32 current_state; @@ -1041,19 +1038,19 @@ static void scic_sds_port_suspend_port_task_scheduler(struct isci_port *iport) */ static void scic_sds_port_post_dummy_request(struct isci_port *iport) { - struct scic_sds_controller *scic = iport->owning_controller; + struct isci_host *ihost = iport->owning_controller; u16 tag = iport->reserved_tag; struct scu_task_context *tc; u32 command; - tc = &scic->task_context_table[ISCI_TAG_TCI(tag)]; + tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; tc->abort = 0; command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | ISCI_TAG_TCI(tag); - scic_sds_controller_post_request(scic, command); + scic_sds_controller_post_request(ihost, command); } /** @@ -1065,19 +1062,19 @@ static void scic_sds_port_post_dummy_request(struct isci_port *iport) */ static void scic_sds_port_abort_dummy_request(struct isci_port *iport) { - struct scic_sds_controller *scic = iport->owning_controller; + struct isci_host *ihost = iport->owning_controller; u16 tag = iport->reserved_tag; struct scu_task_context *tc; u32 command; - tc = &scic->task_context_table[ISCI_TAG_TCI(tag)]; + tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; tc->abort = 1; command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT | iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | ISCI_TAG_TCI(tag); - scic_sds_controller_post_request(scic, command); + scic_sds_controller_post_request(ihost, command); } /** @@ -1115,8 +1112,7 @@ static void scic_sds_port_ready_substate_operational_enter(struct sci_base_state { u32 index; struct isci_port *iport = container_of(sm, typeof(*iport), sm); - struct scic_sds_controller *scic = iport->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = iport->owning_controller; isci_port_ready(ihost, iport); @@ -1141,13 +1137,13 @@ static void scic_sds_port_ready_substate_operational_enter(struct sci_base_state static void scic_sds_port_invalidate_dummy_remote_node(struct isci_port *iport) { - struct scic_sds_controller *scic = iport->owning_controller; + struct isci_host *ihost = iport->owning_controller; u8 phys_index = iport->physical_port_index; union scu_remote_node_context *rnc; u16 rni = iport->reserved_rni; u32 command; - rnc = &scic->remote_node_context_table[rni]; + rnc = &ihost->remote_node_context_table[rni]; rnc->ssp.is_valid = false; @@ -1155,13 +1151,13 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct isci_port *iport) * controller and give it ample time to act before posting the rnc * invalidate */ - readl(&scic->smu_registers->interrupt_status); /* flush */ + readl(&ihost->smu_registers->interrupt_status); /* flush */ udelay(10); command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - scic_sds_controller_post_request(scic, command); + scic_sds_controller_post_request(ihost, command); } /** @@ -1175,8 +1171,7 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct isci_port *iport) static void scic_sds_port_ready_substate_operational_exit(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); - struct scic_sds_controller *scic = iport->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = iport->owning_controller; /* * Kill the dummy task for this port if it has not yet posted @@ -1194,8 +1189,7 @@ static void scic_sds_port_ready_substate_operational_exit(struct sci_base_state_ static void scic_sds_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); - struct scic_sds_controller *scic = iport->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = iport->owning_controller; if (iport->active_phy_mask == 0) { isci_port_not_ready(ihost, iport); @@ -1218,7 +1212,7 @@ static void scic_sds_port_ready_substate_configuring_exit(struct sci_base_state_ enum sci_status scic_sds_port_start(struct isci_port *iport) { - struct scic_sds_controller *scic = iport->owning_controller; + struct isci_host *ihost = iport->owning_controller; enum sci_status status = SCI_SUCCESS; enum scic_sds_port_states state; u32 phy_mask; @@ -1241,7 +1235,7 @@ enum sci_status scic_sds_port_start(struct isci_port *iport) if (iport->reserved_rni == SCU_DUMMY_INDEX) { u16 rni = scic_sds_remote_node_table_allocate_remote_node( - &scic->available_remote_nodes, 1); + &ihost->available_remote_nodes, 1); if (rni != SCU_DUMMY_INDEX) scic_sds_port_construct_dummy_rnc(iport, rni); @@ -1251,7 +1245,6 @@ enum sci_status scic_sds_port_start(struct isci_port *iport) } if (iport->reserved_tag == SCI_CONTROLLER_INVALID_IO_TAG) { - struct isci_host *ihost = scic_to_ihost(scic); u16 tag; tag = isci_alloc_tag(ihost); @@ -1634,30 +1627,30 @@ scic_sds_port_disable_port_task_scheduler(struct isci_port *iport) static void scic_sds_port_post_dummy_remote_node(struct isci_port *iport) { - struct scic_sds_controller *scic = iport->owning_controller; + struct isci_host *ihost = iport->owning_controller; u8 phys_index = iport->physical_port_index; union scu_remote_node_context *rnc; u16 rni = iport->reserved_rni; u32 command; - rnc = &scic->remote_node_context_table[rni]; + rnc = &ihost->remote_node_context_table[rni]; rnc->ssp.is_valid = true; command = SCU_CONTEXT_COMMAND_POST_RNC_32 | phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - scic_sds_controller_post_request(scic, command); + scic_sds_controller_post_request(ihost, command); /* ensure hardware has seen the post rnc command and give it * ample time to act before sending the suspend */ - readl(&scic->smu_registers->interrupt_status); /* flush */ + readl(&ihost->smu_registers->interrupt_status); /* flush */ udelay(10); command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - scic_sds_controller_post_request(scic, command); + scic_sds_controller_post_request(ihost, command); } static void scic_sds_port_stopped_state_enter(struct sci_base_state_machine *sm) @@ -1684,8 +1677,7 @@ static void scic_sds_port_stopped_state_exit(struct sci_base_state_machine *sm) static void scic_sds_port_ready_state_enter(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); - struct scic_sds_controller *scic = iport->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = iport->owning_controller; u32 prev_state; prev_state = iport->sm.previous_state_id; @@ -1758,7 +1750,7 @@ static const struct sci_base_state scic_sds_port_state_table[] = { }; void scic_sds_port_construct(struct isci_port *iport, u8 index, - struct scic_sds_controller *scic) + struct isci_host *ihost) { sci_init_sm(&iport->sm, scic_sds_port_state_table, SCI_PORT_STOPPED); @@ -1767,7 +1759,7 @@ void scic_sds_port_construct(struct isci_port *iport, u8 index, iport->active_phy_mask = 0; iport->ready_exit = false; - iport->owning_controller = scic; + iport->owning_controller = ihost; iport->started_request_count = 0; iport->assigned_device_count = 0; @@ -1810,8 +1802,7 @@ void scic_sds_port_broadcast_change_received( struct isci_port *iport, struct isci_phy *iphy) { - struct scic_sds_controller *scic = iport->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = iport->owning_controller; /* notify the user. */ isci_port_bc_change_received(ihost, iport, iphy); diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index b9bc89b..9a9be7b 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -115,7 +115,7 @@ struct isci_port { u32 assigned_device_count; u32 not_ready_reason; struct isci_phy *phy_table[SCI_MAX_PHYS]; - struct scic_sds_controller *owning_controller; + struct isci_host *owning_controller; struct sci_timer timer; struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers; /* XXX rework: only one register, no need to replicate per-port */ @@ -243,7 +243,7 @@ static inline void scic_sds_port_decrement_request_count(struct isci_port *iport void scic_sds_port_construct( struct isci_port *iport, u8 port_index, - struct scic_sds_controller *scic); + struct isci_host *ihost); enum sci_status scic_sds_port_initialize( struct isci_port *iport, diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index bb62d2a..a0a135d 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -113,7 +113,7 @@ static s32 sci_sas_address_compare( * NULL if there is no matching port for the phy. */ static struct isci_port *scic_sds_port_configuration_agent_find_port( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct isci_phy *iphy) { u8 i; @@ -130,8 +130,7 @@ static struct isci_port *scic_sds_port_configuration_agent_find_port( scic_sds_phy_get_sas_address(iphy, &phy_sas_address); scic_sds_phy_get_attached_sas_address(iphy, &phy_attached_device_address); - for (i = 0; i < scic->logical_port_entries; i++) { - struct isci_host *ihost = scic_to_ihost(scic); + for (i = 0; i < ihost->logical_port_entries; i++) { struct isci_port *iport = &ihost->ports[i]; scic_sds_port_get_sas_address(iport, &port_sas_address); @@ -158,10 +157,9 @@ static struct isci_port *scic_sds_port_configuration_agent_find_port( * the port configuration is not valid for this port configuration agent. */ static enum sci_status scic_sds_port_configuration_agent_validate_ports( - struct scic_sds_controller *controller, + struct isci_host *ihost, struct scic_sds_port_configuration_agent *port_agent) { - struct isci_host *ihost = scic_to_ihost(controller); struct sci_sas_address first_address; struct sci_sas_address second_address; @@ -239,17 +237,11 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * Manual port configuration agent routines * ****************************************************************************** */ -/** - * - * - * This routine will verify that all of the phys in the same port are using the - * same SAS address. - */ -static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent) +/* verify all of the phys in the same port are using the same SAS address */ +static enum sci_status +scic_sds_mpc_agent_validate_phy_configuration(struct isci_host *ihost, + struct scic_sds_port_configuration_agent *port_agent) { - struct isci_host *ihost = scic_to_ihost(controller); u32 phy_mask; u32 assigned_phy_mask; struct sci_sas_address sas_address; @@ -262,7 +254,7 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( sas_address.low = 0; for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { - phy_mask = controller->oem_parameters.sds1.ports[port_index].phy_mask; + phy_mask = ihost->oem_parameters.sds1.ports[port_index].phy_mask; if (!phy_mask) continue; @@ -324,7 +316,7 @@ static enum sci_status scic_sds_mpc_agent_validate_phy_configuration( phy_index++; } - return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); + return scic_sds_port_configuration_agent_validate_ports(ihost, port_agent); } static void mpc_agent_timeout(unsigned long data) @@ -332,14 +324,12 @@ static void mpc_agent_timeout(unsigned long data) u8 index; struct sci_timer *tmr = (struct sci_timer *)data; struct scic_sds_port_configuration_agent *port_agent; - struct scic_sds_controller *scic; struct isci_host *ihost; unsigned long flags; u16 configure_phy_mask; port_agent = container_of(tmr, typeof(*port_agent), timer); - scic = container_of(port_agent, typeof(*scic), port_agent); - ihost = scic_to_ihost(scic); + ihost = container_of(port_agent, typeof(*ihost), port_agent); spin_lock_irqsave(&ihost->scic_lock, flags); @@ -355,7 +345,7 @@ static void mpc_agent_timeout(unsigned long data) struct isci_phy *iphy = &ihost->phys[index]; if (configure_phy_mask & (1 << index)) { - port_agent->link_up_handler(scic, port_agent, + port_agent->link_up_handler(ihost, port_agent, phy_get_non_dummy_port(iphy), iphy); } @@ -365,7 +355,7 @@ done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } -static void scic_sds_mpc_agent_link_up(struct scic_sds_controller *controller, +static void scic_sds_mpc_agent_link_up(struct isci_host *ihost, struct scic_sds_port_configuration_agent *port_agent, struct isci_port *iport, struct isci_phy *iphy) @@ -401,7 +391,7 @@ static void scic_sds_mpc_agent_link_up(struct scic_sds_controller *controller, * link down notification from a phy that has no assocoated port? */ static void scic_sds_mpc_agent_link_down( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct scic_sds_port_configuration_agent *port_agent, struct isci_port *iport, struct isci_phy *iphy) @@ -438,26 +428,17 @@ static void scic_sds_mpc_agent_link_down( } } -/* - * ****************************************************************************** - * Automatic port configuration agent routines - * ****************************************************************************** */ - -/** - * - * - * This routine will verify that the phys are assigned a valid SAS address for - * automatic port configuration mode. +/* verify phys are assigned a valid SAS address for automatic port + * configuration mode. */ -static enum sci_status scic_sds_apc_agent_validate_phy_configuration( - struct scic_sds_controller *controller, - struct scic_sds_port_configuration_agent *port_agent) +static enum sci_status +scic_sds_apc_agent_validate_phy_configuration(struct isci_host *ihost, + struct scic_sds_port_configuration_agent *port_agent) { u8 phy_index; u8 port_index; struct sci_sas_address sas_address; struct sci_sas_address phy_assigned_address; - struct isci_host *ihost = scic_to_ihost(controller); phy_index = 0; @@ -484,10 +465,10 @@ static enum sci_status scic_sds_apc_agent_validate_phy_configuration( } } - return scic_sds_port_configuration_agent_validate_ports(controller, port_agent); + return scic_sds_port_configuration_agent_validate_ports(ihost, port_agent); } -static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *controller, +static void scic_sds_apc_agent_configure_ports(struct isci_host *ihost, struct scic_sds_port_configuration_agent *port_agent, struct isci_phy *iphy, bool start_timer) @@ -496,9 +477,8 @@ static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *contr enum sci_status status; struct isci_port *iport; enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; - struct isci_host *ihost = scic_to_ihost(controller); - iport = scic_sds_port_configuration_agent_find_port(controller, iphy); + iport = scic_sds_port_configuration_agent_find_port(ihost, iphy); if (iport) { if (scic_sds_port_is_valid_phy_assignment(iport, iphy->phy_index)) @@ -619,7 +599,7 @@ static void scic_sds_apc_agent_configure_ports(struct scic_sds_controller *contr * notifications. Is it possible to get a link down notification from a phy * that has no assocoated port? */ -static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, +static void scic_sds_apc_agent_link_up(struct isci_host *ihost, struct scic_sds_port_configuration_agent *port_agent, struct isci_port *iport, struct isci_phy *iphy) @@ -629,7 +609,7 @@ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, if (!iport) { /* the phy is not the part of this port */ port_agent->phy_ready_mask |= 1 << phy_index; - scic_sds_apc_agent_configure_ports(scic, port_agent, iphy, true); + scic_sds_apc_agent_configure_ports(ihost, port_agent, iphy, true); } else { /* the phy is already the part of the port */ u32 port_state = iport->sm.current_state_id; @@ -658,7 +638,7 @@ static void scic_sds_apc_agent_link_up(struct scic_sds_controller *scic, * port? */ static void scic_sds_apc_agent_link_down( - struct scic_sds_controller *controller, + struct isci_host *ihost, struct scic_sds_port_configuration_agent *port_agent, struct isci_port *iport, struct isci_phy *iphy) @@ -683,14 +663,12 @@ static void apc_agent_timeout(unsigned long data) u32 index; struct sci_timer *tmr = (struct sci_timer *)data; struct scic_sds_port_configuration_agent *port_agent; - struct scic_sds_controller *scic; struct isci_host *ihost; unsigned long flags; u16 configure_phy_mask; port_agent = container_of(tmr, typeof(*port_agent), timer); - scic = container_of(port_agent, typeof(*scic), port_agent); - ihost = scic_to_ihost(scic); + ihost = container_of(port_agent, typeof(*ihost), port_agent); spin_lock_irqsave(&ihost->scic_lock, flags); @@ -708,7 +686,7 @@ static void apc_agent_timeout(unsigned long data) if ((configure_phy_mask & (1 << index)) == 0) continue; - scic_sds_apc_agent_configure_ports(scic, port_agent, + scic_sds_apc_agent_configure_ports(ihost, port_agent, &ihost->phys[index], false); } @@ -748,17 +726,17 @@ void scic_sds_port_configuration_agent_construct( } enum sci_status scic_sds_port_configuration_agent_initialize( - struct scic_sds_controller *scic, + struct isci_host *ihost, struct scic_sds_port_configuration_agent *port_agent) { enum sci_status status; enum scic_port_configuration_mode mode; - mode = scic->oem_parameters.sds1.controller.mode_type; + mode = ihost->oem_parameters.sds1.controller.mode_type; if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { status = scic_sds_mpc_agent_validate_phy_configuration( - scic, port_agent); + ihost, port_agent); port_agent->link_up_handler = scic_sds_mpc_agent_link_up; port_agent->link_down_handler = scic_sds_mpc_agent_link_down; @@ -766,7 +744,7 @@ enum sci_status scic_sds_port_configuration_agent_initialize( sci_init_timer(&port_agent->timer, mpc_agent_timeout); } else { status = scic_sds_apc_agent_validate_phy_configuration( - scic, port_agent); + ihost, port_agent); port_agent->link_up_handler = scic_sds_apc_agent_link_up; port_agent->link_down_handler = scic_sds_apc_agent_link_down; diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index 95c8d91..e40cb5f 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -165,7 +165,7 @@ struct scic_sds_oem_params; int scic_oem_parameters_validate(struct scic_sds_oem_params *oem); union scic_oem_parameters; -void scic_oem_parameters_get(struct scic_sds_controller *scic, +void scic_oem_parameters_get(struct isci_host *ihost, union scic_oem_parameters *oem); struct isci_orom; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 3b02340..9043b45 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -62,7 +62,7 @@ #include "task.h" /** - * isci_remote_device_not_ready() - This function is called by the scic when + * isci_remote_device_not_ready() - This function is called by the ihost when * the remote device is not ready. We mark the isci device as ready (not * "ready_for_io") and signal the waiting proccess. * @isci_host: This parameter specifies the isci host object. @@ -92,7 +92,7 @@ static void isci_remote_device_not_ready(struct isci_host *ihost, "%s: isci_device = %p request = %p\n", __func__, idev, ireq); - scic_controller_terminate_request(&ihost->sci, + scic_controller_terminate_request(ihost, idev, ireq); } @@ -104,7 +104,7 @@ static void isci_remote_device_not_ready(struct isci_host *ihost, } /** - * isci_remote_device_ready() - This function is called by the scic when the + * isci_remote_device_ready() - This function is called by the ihost when the * remote device is ready. We mark the isci device as ready and signal the * waiting proccess. * @ihost: our valid isci_host @@ -135,8 +135,7 @@ static void rnc_destruct_done(void *_dev) static enum sci_status scic_sds_remote_device_terminate_requests(struct isci_remote_device *idev) { - struct scic_sds_controller *scic = idev->owning_port->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = idev->owning_port->owning_controller; enum sci_status status = SCI_SUCCESS; u32 i; @@ -148,7 +147,7 @@ static enum sci_status scic_sds_remote_device_terminate_requests(struct isci_rem ireq->target_device != idev) continue; - s = scic_controller_terminate_request(scic, idev, ireq); + s = scic_controller_terminate_request(ihost, idev, ireq); if (s != SCI_SUCCESS) status = s; } @@ -276,7 +275,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * { struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct scic_sds_controller *scic = idev->owning_port->owning_controller; + struct isci_host *ihost = idev->owning_port->owning_controller; enum sci_status status; switch (state) { @@ -290,7 +289,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); /* Return the frame back to the controller */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_READY: case SCI_STP_DEV_NCQ_ERROR: @@ -303,7 +302,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * void *frame_header; ssize_t word_cnt; - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, &frame_header); if (status != SCI_SUCCESS) @@ -312,7 +311,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * word_cnt = sizeof(hdr) / sizeof(u32); sci_swab32_cpy(&hdr, frame_header, word_cnt); - ireq = scic_request_by_tag(scic, be16_to_cpu(hdr.tag)); + ireq = scic_request_by_tag(ihost, be16_to_cpu(hdr.tag)); if (ireq && ireq->target_device == idev) { /* The IO request is now in charge of releasing the frame */ status = scic_sds_io_request_frame_handler(ireq, frame_index); @@ -320,14 +319,14 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * /* We could not map this tag to a valid IO * request Just toss the frame and continue */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); } break; } case SCI_STP_DEV_NCQ: { struct dev_to_host_fis *hdr; - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&hdr); if (status != SCI_SUCCESS) @@ -350,7 +349,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * } else status = SCI_FAILURE; - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); break; } case SCI_STP_DEV_CMD: @@ -461,7 +460,7 @@ static void scic_sds_remote_device_start_request(struct isci_remote_device *idev } } -enum sci_status scic_sds_remote_device_start_io(struct scic_sds_controller *scic, +enum sci_status scic_sds_remote_device_start_io(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { @@ -597,7 +596,7 @@ static enum sci_status common_complete_io(struct isci_port *iport, return status; } -enum sci_status scic_sds_remote_device_complete_io(struct scic_sds_controller *scic, +enum sci_status scic_sds_remote_device_complete_io(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { @@ -678,7 +677,7 @@ static void scic_sds_remote_device_continue_request(void *dev) scic_controller_continue_io(idev->working_request); } -enum sci_status scic_sds_remote_device_start_task(struct scic_sds_controller *scic, +enum sci_status scic_sds_remote_device_start_task(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { @@ -802,13 +801,13 @@ static void remote_device_resume_done(void *_dev) static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) { struct isci_remote_device *idev = _dev; - struct scic_sds_controller *scic = idev->owning_port->owning_controller; + struct isci_host *ihost = idev->owning_port->owning_controller; /* For NCQ operation we do not issue a isci_remote_device_not_ready(). * As a result, avoid sending the ready notification. */ if (idev->sm.previous_state_id != SCI_STP_DEV_NCQ) - isci_remote_device_ready(scic_to_ihost(scic), idev); + isci_remote_device_ready(ihost, idev); } static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_machine *sm) @@ -836,7 +835,7 @@ static enum sci_status scic_remote_device_destruct(struct isci_remote_device *id { struct sci_base_state_machine *sm = &idev->sm; enum scic_sds_remote_device_states state = sm->current_state_id; - struct scic_sds_controller *scic; + struct isci_host *ihost; if (state != SCI_DEV_STOPPED) { dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", @@ -844,8 +843,8 @@ static enum sci_status scic_remote_device_destruct(struct isci_remote_device *id return SCI_FAILURE_INVALID_STATE; } - scic = idev->owning_port->owning_controller; - scic_sds_controller_free_remote_node_context(scic, idev, + ihost = idev->owning_port->owning_controller; + scic_sds_controller_free_remote_node_context(ihost, idev, idev->rnc.remote_node_index); idev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; sci_change_state(sm, SCI_DEV_FINAL); @@ -878,7 +877,7 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct scic_sds_controller *scic = idev->owning_port->owning_controller; + struct isci_host *ihost = idev->owning_port->owning_controller; u32 prev_state; /* If we are entering from the stopping state let the SCI User know that @@ -886,16 +885,15 @@ static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_mac */ prev_state = idev->sm.previous_state_id; if (prev_state == SCI_DEV_STOPPING) - isci_remote_device_deconstruct(scic_to_ihost(scic), idev); + isci_remote_device_deconstruct(ihost, idev); - scic_sds_controller_remote_device_stopped(scic, idev); + scic_sds_controller_remote_device_stopped(ihost, idev); } static void scic_sds_remote_device_starting_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); @@ -904,7 +902,7 @@ static void scic_sds_remote_device_starting_state_enter(struct sci_base_state_ma static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct scic_sds_controller *scic = idev->owning_port->owning_controller; + struct isci_host *ihost = idev->owning_port->owning_controller; struct domain_device *dev = idev->domain_dev; if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { @@ -912,7 +910,7 @@ static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machi } else if (dev_is_expander(dev)) { sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE); } else - isci_remote_device_ready(scic_to_ihost(scic), idev); + isci_remote_device_ready(ihost, idev); } static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machine *sm) @@ -921,9 +919,9 @@ static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machin struct domain_device *dev = idev->domain_dev; if (dev->dev_type == SAS_END_DEV) { - struct scic_sds_controller *scic = idev->owning_port->owning_controller; + struct isci_host *ihost = idev->owning_port->owning_controller; - isci_remote_device_not_ready(scic_to_ihost(scic), idev, + isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); } } @@ -963,40 +961,40 @@ static void scic_sds_stp_remote_device_ready_idle_substate_enter(struct sci_base static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); BUG_ON(idev->working_request == NULL); - isci_remote_device_not_ready(scic_to_ihost(scic), idev, + isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); if (idev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) - isci_remote_device_not_ready(scic_to_ihost(scic), idev, + isci_remote_device_not_ready(ihost, idev, idev->not_ready_reason); } static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); - isci_remote_device_ready(scic_to_ihost(scic), idev); + isci_remote_device_ready(ihost, idev); } static void scic_sds_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); BUG_ON(idev->working_request == NULL); - isci_remote_device_not_ready(scic_to_ihost(scic), idev, + isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } @@ -1303,7 +1301,7 @@ void isci_remote_device_release(struct kref *kref) * @isci_host: This parameter specifies the isci host object. * @isci_device: This parameter specifies the remote device. * - * The status of the scic request to stop. + * The status of the ihost request to stop. */ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) { diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 4579858..bc4da20 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -402,17 +402,17 @@ enum sci_status scic_sds_remote_device_event_handler( u32 event_code); enum sci_status scic_sds_remote_device_start_io( - struct scic_sds_controller *controller, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_sds_remote_device_start_task( - struct scic_sds_controller *controller, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); enum sci_status scic_sds_remote_device_complete_io( - struct scic_sds_controller *controller, + struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index e485744..8a5203b 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -107,11 +107,11 @@ static void scic_sds_remote_node_context_construct_buffer( struct domain_device *dev = idev->domain_dev; int rni = sci_rnc->remote_node_index; union scu_remote_node_context *rnc; - struct scic_sds_controller *scic; + struct isci_host *ihost; __le64 sas_addr; - scic = scic_sds_remote_device_get_controller(idev); - rnc = scic_sds_controller_get_remote_node_context_buffer(scic, rni); + ihost = scic_sds_remote_device_get_controller(idev); + rnc = scic_sds_controller_get_remote_node_context_buffer(ihost, rni); memset(rnc, 0, sizeof(union scu_remote_node_context) * scic_sds_remote_device_node_count(idev)); @@ -135,14 +135,14 @@ static void scic_sds_remote_node_context_construct_buffer( if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { rnc->ssp.connection_occupancy_timeout = - scic->user_parameters.sds1.stp_max_occupancy_timeout; + ihost->user_parameters.sds1.stp_max_occupancy_timeout; rnc->ssp.connection_inactivity_timeout = - scic->user_parameters.sds1.stp_inactivity_timeout; + ihost->user_parameters.sds1.stp_inactivity_timeout; } else { rnc->ssp.connection_occupancy_timeout = - scic->user_parameters.sds1.ssp_max_occupancy_timeout; + ihost->user_parameters.sds1.ssp_max_occupancy_timeout; rnc->ssp.connection_inactivity_timeout = - scic->user_parameters.sds1.ssp_inactivity_timeout; + ihost->user_parameters.sds1.ssp_inactivity_timeout; } rnc->ssp.initial_arbitration_wait_time = 0; diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 90ead66..36e6748 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -74,19 +74,19 @@ static struct scu_sgl_element_pair *to_sgl_element_pair(struct isci_request *ire return &ireq->sg_table[idx - 2]; } -static dma_addr_t to_sgl_element_pair_dma(struct scic_sds_controller *scic, +static dma_addr_t to_sgl_element_pair_dma(struct isci_host *ihost, struct isci_request *ireq, u32 idx) { u32 offset; if (idx == 0) { offset = (void *) &ireq->tc->sgl_pair_ab - - (void *) &scic->task_context_table[0]; - return scic->task_context_dma + offset; + (void *) &ihost->task_context_table[0]; + return ihost->task_context_dma + offset; } else if (idx == 1) { offset = (void *) &ireq->tc->sgl_pair_cd - - (void *) &scic->task_context_table[0]; - return scic->task_context_dma + offset; + (void *) &ihost->task_context_table[0]; + return ihost->task_context_dma + offset; } return scic_io_request_get_dma_addr(ireq, &ireq->sg_table[idx - 2]); @@ -102,8 +102,7 @@ static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) static void scic_sds_request_build_sgl(struct isci_request *ireq) { - struct isci_host *isci_host = ireq->isci_host; - struct scic_sds_controller *scic = &isci_host->sci; + struct isci_host *ihost = ireq->isci_host; struct sas_task *task = isci_request_access_task(ireq); struct scatterlist *sg = NULL; dma_addr_t dma_addr; @@ -125,7 +124,7 @@ static void scic_sds_request_build_sgl(struct isci_request *ireq) memset(&scu_sg->B, 0, sizeof(scu_sg->B)); if (prev_sg) { - dma_addr = to_sgl_element_pair_dma(scic, + dma_addr = to_sgl_element_pair_dma(ihost, ireq, sg_idx); @@ -141,7 +140,7 @@ static void scic_sds_request_build_sgl(struct isci_request *ireq) } else { /* handle when no sg */ scu_sg = to_sgl_element_pair(ireq, sg_idx); - dma_addr = dma_map_single(&isci_host->pdev->dev, + dma_addr = dma_map_single(&ihost->pdev->dev, task->scatter, task->total_xfer_len, task->data_dir); @@ -508,7 +507,7 @@ scic_io_request_construct_sata(struct isci_request *ireq, scu_stp_raw_request_construct_task_context(ireq); return SCI_SUCCESS; } else { - dev_err(scic_to_dev(ireq->owning_controller), + dev_err(&ireq->owning_controller->pdev->dev, "%s: Request 0x%p received un-handled SAT " "management protocol 0x%x.\n", __func__, ireq, tmf->tmf_code); @@ -518,7 +517,7 @@ scic_io_request_construct_sata(struct isci_request *ireq, } if (!sas_protocol_ata(task->task_proto)) { - dev_err(scic_to_dev(ireq->owning_controller), + dev_err(&ireq->owning_controller->pdev->dev, "%s: Non-ATA protocol in SATA path: 0x%x\n", __func__, task->task_proto); @@ -616,7 +615,7 @@ enum sci_status scic_task_request_construct_sata(struct isci_request *ireq) tmf->tmf_code == isci_tmf_sata_srst_low) { scu_stp_raw_request_construct_task_context(ireq); } else { - dev_err(scic_to_dev(ireq->owning_controller), + dev_err(&ireq->owning_controller->pdev->dev, "%s: Request 0x%p received un-handled SAT " "Protocol 0x%x.\n", __func__, ireq, tmf->tmf_code); @@ -639,11 +638,11 @@ enum sci_status scic_task_request_construct_sata(struct isci_request *ireq) #define SCU_TASK_CONTEXT_SRAM 0x200000 static u32 sci_req_tx_bytes(struct isci_request *ireq) { - struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_host *ihost = ireq->owning_controller; u32 ret_val = 0; - if (readl(&scic->smu_registers->address_modifier) == 0) { - void __iomem *scu_reg_base = scic->scu_registers; + if (readl(&ihost->smu_registers->address_modifier) == 0) { + void __iomem *scu_reg_base = ihost->scu_registers; /* get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where * BAR1 is the scu_registers @@ -663,11 +662,11 @@ enum sci_status scic_sds_request_start(struct isci_request *ireq) { enum sci_base_request_states state; struct scu_task_context *tc = ireq->tc; - struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_host *ihost = ireq->owning_controller; state = ireq->sm.current_state_id; if (state != SCI_REQ_CONSTRUCTED) { - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: SCIC IO Request requested to start while in wrong " "state %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; @@ -749,7 +748,7 @@ scic_sds_io_request_terminate(struct isci_request *ireq) return SCI_SUCCESS; case SCI_REQ_COMPLETED: default: - dev_warn(scic_to_dev(ireq->owning_controller), + dev_warn(&ireq->owning_controller->pdev->dev, "%s: SCIC IO Request requested to abort while in wrong " "state %d\n", __func__, @@ -763,7 +762,7 @@ scic_sds_io_request_terminate(struct isci_request *ireq) enum sci_status scic_sds_request_complete(struct isci_request *ireq) { enum sci_base_request_states state; - struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_host *ihost = ireq->owning_controller; state = ireq->sm.current_state_id; if (WARN_ONCE(state != SCI_REQ_COMPLETED, @@ -771,7 +770,7 @@ enum sci_status scic_sds_request_complete(struct isci_request *ireq) return SCI_FAILURE_INVALID_STATE; if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) - scic_sds_controller_release_frame(scic, + scic_sds_controller_release_frame(ihost, ireq->saved_rx_frame_index); /* XXX can we just stop the machine and remove the 'final' state? */ @@ -783,12 +782,12 @@ enum sci_status scic_sds_io_request_event_handler(struct isci_request *ireq, u32 event_code) { enum sci_base_request_states state; - struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_host *ihost = ireq->owning_controller; state = ireq->sm.current_state_id; if (state != SCI_REQ_STP_PIO_DATA_IN) { - dev_warn(scic_to_dev(scic), "%s: (%x) in wrong state %d\n", + dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %d\n", __func__, event_code, state); return SCI_FAILURE_INVALID_STATE; @@ -802,7 +801,7 @@ enum sci_status scic_sds_io_request_event_handler(struct isci_request *ireq, sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); return SCI_SUCCESS; default: - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: pio request unexpected event %#x\n", __func__, event_code); @@ -1024,7 +1023,7 @@ static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq * There is a potential for receiving multiple task responses if * we decide to send the task IU again. */ - dev_warn(scic_to_dev(ireq->owning_controller), + dev_warn(&ireq->owning_controller->pdev->dev, "%s: TaskRequest:0x%p CompletionCode:%x - " "ACK/NAK timeout\n", __func__, ireq, completion_code); @@ -1073,7 +1072,7 @@ smp_request_await_response_tc_event(struct isci_request *ireq, * response within 2 ms. This causes our hardware break * the connection and set TC completion with one of * these SMP_XXX_XX_ERR status. For these type of error, - * we ask scic user to retry the request. + * we ask ihost user to retry the request. */ scic_sds_request_set_status(ireq, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED); @@ -1451,18 +1450,18 @@ static void scic_sds_stp_request_udma_complete_request( static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct isci_request *ireq, u32 frame_index) { - struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_host *ihost = ireq->owning_controller; struct dev_to_host_fis *frame_header; enum sci_status status; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); if ((status == SCI_SUCCESS) && (frame_header->fis_type == FIS_REGD2H)) { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); @@ -1471,7 +1470,7 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct is frame_buffer); } - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return status; } @@ -1480,7 +1479,7 @@ enum sci_status scic_sds_io_request_frame_handler(struct isci_request *ireq, u32 frame_index) { - struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_host *ihost = ireq->owning_controller; struct isci_stp_request *stp_req = &ireq->stp.req; enum sci_base_request_states state; enum sci_status status; @@ -1492,7 +1491,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct ssp_frame_hdr ssp_hdr; void *frame_header; - scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, &frame_header); @@ -1503,7 +1502,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct ssp_response_iu *resp_iu; ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&resp_iu); @@ -1522,7 +1521,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, SCI_SUCCESS); } else { /* not a response frame, why did it get forwarded? */ - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC IO Request 0x%p received unexpected " "frame %d type 0x%02x\n", __func__, ireq, frame_index, ssp_hdr.frame_type); @@ -1532,7 +1531,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, * In any case we are done with this frame buffer return it to * the controller */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return SCI_SUCCESS; } @@ -1540,14 +1539,14 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, case SCI_REQ_TASK_WAIT_TC_RESP: scic_sds_io_request_copy_response(ireq); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); - scic_sds_controller_release_frame(scic,frame_index); + scic_sds_controller_release_frame(ihost,frame_index); return SCI_SUCCESS; case SCI_REQ_SMP_WAIT_RESP: { struct smp_resp *rsp_hdr = &ireq->smp.rsp; void *frame_header; - scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, &frame_header); @@ -1558,7 +1557,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, if (rsp_hdr->frame_type == SMP_RESPONSE) { void *smp_resp; - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, &smp_resp); @@ -1577,7 +1576,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, * This was not a response frame why did it get * forwarded? */ - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC SMP Request 0x%p received unexpected " "frame %d type 0x%02x\n", __func__, @@ -1592,7 +1591,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return SCI_SUCCESS; } @@ -1619,12 +1618,12 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct dev_to_host_fis *frame_header; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC IO Request 0x%p could not get frame " "header for frame index %d, status %x\n", __func__, @@ -1637,7 +1636,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, switch (frame_header->fis_type) { case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); @@ -1651,7 +1650,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, break; default: - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: IO Request:0x%p Frame Id:%d protocol " "violation occurred\n", __func__, stp_req, frame_index); @@ -1664,7 +1663,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return status; } @@ -1674,12 +1673,12 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct dev_to_host_fis *frame_header; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC IO Request 0x%p could not get frame " "header for frame index %d, status %x\n", __func__, stp_req, frame_index, status); @@ -1689,7 +1688,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, switch (frame_header->fis_type) { case FIS_PIO_SETUP: /* Get from the frame buffer the PIO Setup Data */ - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); @@ -1736,7 +1735,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, * FIS when it is still busy? Do nothing since * we are still in the right state. */ - dev_dbg(scic_to_dev(scic), + dev_dbg(&ihost->pdev->dev, "%s: SCIC PIO Request 0x%p received " "D2H Register FIS with BSY status " "0x%x\n", @@ -1746,7 +1745,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, break; } - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); @@ -1767,7 +1766,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, } /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return status; } @@ -1776,12 +1775,12 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct dev_to_host_fis *frame_header; struct sata_fis_data *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC IO Request 0x%p could not get frame " "header for frame index %d, status %x\n", __func__, @@ -1792,7 +1791,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, } if (frame_header->fis_type != FIS_DATA) { - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC PIO Request 0x%p received frame %d " "with fis type 0x%02x when expecting a data " "fis.\n", @@ -1808,7 +1807,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return status; } @@ -1816,7 +1815,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, ireq->saved_rx_frame_index = frame_index; stp_req->pio_len = 0; } else { - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); @@ -1824,7 +1823,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, (u8 *)frame_buffer); /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); } /* Check for the end of the transfer, are there more @@ -1849,11 +1848,11 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct dev_to_host_fis *frame_header; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control, + status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); if (status != SCI_SUCCESS) { - dev_err(scic_to_dev(scic), + dev_err(&ihost->pdev->dev, "%s: SCIC IO Request 0x%p could not get frame " "header for frame index %d, status %x\n", __func__, @@ -1865,7 +1864,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, switch (frame_header->fis_type) { case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&scic->uf_control, + scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); @@ -1880,7 +1879,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, break; default: - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: IO Request:0x%p Frame Id:%d protocol " "violation occurred\n", __func__, @@ -1896,7 +1895,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return status; } @@ -1905,18 +1904,18 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, * TODO: Is it even possible to get an unsolicited frame in the * aborting state? */ - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return SCI_SUCCESS; default: - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: SCIC IO Request given unexpected frame %x while " "in state %d\n", __func__, frame_index, state); - scic_sds_controller_release_frame(scic, frame_index); + scic_sds_controller_release_frame(ihost, frame_index); return SCI_FAILURE_INVALID_STATE; } } @@ -2042,7 +2041,7 @@ scic_sds_io_request_tc_completion(struct isci_request *ireq, u32 completion_code) { enum sci_base_request_states state; - struct scic_sds_controller *scic = ireq->owning_controller; + struct isci_host *ihost = ireq->owning_controller; state = ireq->sm.current_state_id; @@ -2089,7 +2088,7 @@ scic_sds_io_request_tc_completion(struct isci_request *ireq, completion_code); default: - dev_warn(scic_to_dev(scic), + dev_warn(&ihost->pdev->dev, "%s: SCIC IO Request given task completion " "notification %x while in wrong state %d\n", __func__, @@ -2480,7 +2479,7 @@ static void isci_task_save_for_upper_layer_completion( } } -static void isci_request_io_request_complete(struct isci_host *isci_host, +static void isci_request_io_request_complete(struct isci_host *ihost, struct isci_request *request, enum sci_io_status completion_status) { @@ -2495,7 +2494,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, enum isci_completion_selection complete_to_host = isci_perform_normal_io_completion; - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: request = %p, task = %p,\n" "task->data_dir = %d completion_status = 0x%x\n", __func__, @@ -2616,7 +2615,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, switch (completion_status) { case SCI_IO_FAILURE_RESPONSE_VALID: - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", __func__, request, @@ -2631,17 +2630,17 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, /* crack the iu response buffer. */ resp_iu = &request->ssp.rsp; isci_request_process_response_iu(task, resp_iu, - &isci_host->pdev->dev); + &ihost->pdev->dev); } else if (SAS_PROTOCOL_SMP == task->task_proto) { - dev_err(&isci_host->pdev->dev, + dev_err(&ihost->pdev->dev, "%s: SCI_IO_FAILURE_RESPONSE_VALID: " "SAS_PROTOCOL_SMP protocol\n", __func__); } else - dev_err(&isci_host->pdev->dev, + dev_err(&ihost->pdev->dev, "%s: unknown protocol\n", __func__); /* use the task status set in the task struct by the @@ -2662,7 +2661,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, if (task->task_proto == SAS_PROTOCOL_SMP) { void *rsp = &request->smp.rsp; - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: SMP protocol completion\n", __func__); @@ -2687,20 +2686,20 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, if (task->task_status.residual != 0) status = SAS_DATA_UNDERRUN; - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", __func__, status); } else - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: SCI_IO_SUCCESS\n", __func__); break; case SCI_IO_FAILURE_TERMINATED: - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", __func__, request, @@ -2768,7 +2767,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, default: /* Catch any otherwise unhandled error codes here. */ - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: invalid completion code: 0x%x - " "isci_request = %p\n", __func__, completion_status, request); @@ -2802,11 +2801,11 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, break; if (task->num_scatter == 0) /* 0 indicates a single dma address */ - dma_unmap_single(&isci_host->pdev->dev, + dma_unmap_single(&ihost->pdev->dev, request->zero_scatter_daddr, task->total_xfer_len, task->data_dir); else /* unmap the sgl dma addresses */ - dma_unmap_sg(&isci_host->pdev->dev, task->scatter, + dma_unmap_sg(&ihost->pdev->dev, task->scatter, request->num_sg_entries, task->data_dir); break; case SAS_PROTOCOL_SMP: { @@ -2814,7 +2813,7 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, struct smp_req *smp_req; void *kaddr; - dma_unmap_sg(&isci_host->pdev->dev, sg, 1, DMA_TO_DEVICE); + dma_unmap_sg(&ihost->pdev->dev, sg, 1, DMA_TO_DEVICE); /* need to swab it back in case the command buffer is re-used */ kaddr = kmap_atomic(sg_page(sg), KM_IRQ0); @@ -2828,14 +2827,12 @@ static void isci_request_io_request_complete(struct isci_host *isci_host, } /* Put the completed request on the correct list */ - isci_task_save_for_upper_layer_completion(isci_host, request, response, + isci_task_save_for_upper_layer_completion(ihost, request, response, status, complete_to_host ); /* complete the io request to the core. */ - scic_controller_complete_io(&isci_host->sci, - request->target_device, - request); + scic_controller_complete_io(ihost, request->target_device, request); isci_put_device(idev); /* set terminated handle so it cannot be completed or @@ -2885,8 +2882,7 @@ static void scic_sds_request_started_state_enter(struct sci_base_state_machine * static void scic_sds_request_completed_state_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - struct scic_sds_controller *scic = ireq->owning_controller; - struct isci_host *ihost = scic_to_ihost(scic); + struct isci_host *ihost = ireq->owning_controller; /* Tell the SCI_USER that the IO request is complete */ if (!test_bit(IREQ_TMF, &ireq->flags)) @@ -2985,7 +2981,7 @@ static const struct sci_base_state scic_sds_request_state_table[] = { }; static void -scic_sds_general_request_construct(struct scic_sds_controller *scic, +scic_sds_general_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { @@ -3001,7 +2997,7 @@ scic_sds_general_request_construct(struct scic_sds_controller *scic, } static enum sci_status -scic_io_request_construct(struct scic_sds_controller *scic, +scic_io_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { @@ -3009,7 +3005,7 @@ scic_io_request_construct(struct scic_sds_controller *scic, enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, idev, ireq); + scic_sds_general_request_construct(ihost, idev, ireq); if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; @@ -3028,7 +3024,7 @@ scic_io_request_construct(struct scic_sds_controller *scic, return status; } -enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, +enum sci_status scic_task_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, u16 io_tag, struct isci_request *ireq) { @@ -3036,7 +3032,7 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic, enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(scic, idev, ireq); + scic_sds_general_request_construct(ihost, idev, ireq); if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { @@ -3156,7 +3152,7 @@ scic_io_request_construct_smp(struct device *dev, task_context->initiator_request = 1; task_context->connection_rate = idev->connection_rate; task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(scic); + scic_sds_controller_get_protocol_engine_group(ihost); task_context->logical_port_index = scic_sds_port_get_index(iport); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; task_context->abort = 0; @@ -3199,7 +3195,7 @@ scic_io_request_construct_smp(struct device *dev, task_context->task_phase = 0; ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(scic) << + (scic_sds_controller_get_protocol_engine_group(ihost) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | (scic_sds_port_get_index(iport) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | @@ -3245,7 +3241,7 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) /** * isci_io_request_build() - This function builds the io request object. - * @isci_host: This parameter specifies the ISCI host object + * @ihost: This parameter specifies the ISCI host object * @request: This parameter points to the isci_request object allocated in the * request construct function. * @sci_device: This parameter is the handle for the sci core's remote device @@ -3253,14 +3249,14 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) * * SCI_SUCCESS on successfull completion, or specific failure code. */ -static enum sci_status isci_io_request_build(struct isci_host *isci_host, +static enum sci_status isci_io_request_build(struct isci_host *ihost, struct isci_request *request, struct isci_remote_device *idev) { enum sci_status status = SCI_SUCCESS; struct sas_task *task = isci_request_access_task(request); - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: idev = 0x%p; request = %p, " "num_scatter = %d\n", __func__, @@ -3277,7 +3273,7 @@ static enum sci_status isci_io_request_build(struct isci_host *isci_host, !(SAS_PROTOCOL_SMP & task->task_proto)) { request->num_sg_entries = dma_map_sg( - &isci_host->pdev->dev, + &ihost->pdev->dev, task->scatter, task->num_scatter, task->data_dir @@ -3287,10 +3283,10 @@ static enum sci_status isci_io_request_build(struct isci_host *isci_host, return SCI_FAILURE_INSUFFICIENT_RESOURCES; } - status = scic_io_request_construct(&isci_host->sci, idev, request); + status = scic_io_request_construct(ihost, idev, request); if (status != SCI_SUCCESS) { - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: failed request construct\n", __func__); return SCI_FAILURE; @@ -3309,7 +3305,7 @@ static enum sci_status isci_io_request_build(struct isci_host *isci_host, status = isci_request_stp_request_construct(request); break; default: - dev_warn(&isci_host->pdev->dev, + dev_warn(&ihost->pdev->dev, "%s: unknown protocol\n", __func__); return SCI_FAILURE; } @@ -3392,7 +3388,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide * request was built that way (ie. * ireq->is_task_management_request is false). */ - status = scic_controller_start_task(&ihost->sci, + status = scic_controller_start_task(ihost, idev, ireq); } else { @@ -3400,7 +3396,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide } } else { /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io(&ihost->sci, idev, + status = scic_controller_start_io(ihost, idev, ireq); } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index ca64ea2..0cafcea 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -145,7 +145,7 @@ struct isci_request { */ struct completion *io_request_completion; struct sci_base_state_machine sm; - struct scic_sds_controller *owning_controller; + struct isci_host *owning_controller; struct isci_remote_device *target_device; u16 io_tag; enum sci_request_protocol protocol; @@ -500,7 +500,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide void isci_terminate_pending_requests(struct isci_host *ihost, struct isci_remote_device *idev); enum sci_status -scic_task_request_construct(struct scic_sds_controller *scic, +scic_task_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, u16 io_tag, struct isci_request *ireq); diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 89b01ee..3a1fc55 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -257,7 +257,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return NULL; /* let the core do it's construct. */ - status = scic_task_request_construct(&ihost->sci, idev, tag, + status = scic_task_request_construct(ihost, idev, tag, ireq); if (status != SCI_SUCCESS) { @@ -332,7 +332,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, spin_lock_irqsave(&ihost->scic_lock, flags); /* start the TMF io. */ - status = scic_controller_start_task(&ihost->sci, idev, ireq); + status = scic_controller_start_task(ihost, idev, ireq); if (status != SCI_TASK_SUCCESS) { dev_warn(&ihost->pdev->dev, @@ -364,7 +364,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, if (tmf->cb_state_func != NULL) tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); - scic_controller_terminate_request(&ihost->sci, + scic_controller_terminate_request(ihost, idev, ireq); @@ -514,15 +514,14 @@ static void isci_request_cleanup_completed_loiterer( * request, and wait for it to complete. This function must only be called * from a thread that can wait. Note that the request is terminated and * completed (back to the host, if started there). - * @isci_host: This SCU. + * @ihost: This SCU. * @idev: The target. * @isci_request: The I/O request to be terminated. * */ -static void isci_terminate_request_core( - struct isci_host *isci_host, - struct isci_remote_device *idev, - struct isci_request *isci_request) +static void isci_terminate_request_core(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *isci_request) { enum sci_status status = SCI_SUCCESS; bool was_terminated = false; @@ -533,11 +532,11 @@ static void isci_terminate_request_core( struct completion *io_request_completion; struct sas_task *task; - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: device = %p; request = %p\n", __func__, idev, isci_request); - spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock_irqsave(&ihost->scic_lock, flags); io_request_completion = isci_request->io_request_completion; @@ -557,12 +556,11 @@ static void isci_terminate_request_core( if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { was_terminated = true; needs_cleanup_handling = true; - status = scic_controller_terminate_request( - &isci_host->sci, - idev, - isci_request); + status = scic_controller_terminate_request(ihost, + idev, + isci_request); } - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); /* * The only time the request to terminate will @@ -570,7 +568,7 @@ static void isci_terminate_request_core( * being aborted. */ if (status != SCI_SUCCESS) { - dev_err(&isci_host->pdev->dev, + dev_err(&ihost->pdev->dev, "%s: scic_controller_terminate_request" " returned = 0x%x\n", __func__, status); @@ -579,7 +577,7 @@ static void isci_terminate_request_core( } else { if (was_terminated) { - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: before completion wait (%p/%p)\n", __func__, isci_request, io_request_completion); @@ -593,7 +591,7 @@ static void isci_terminate_request_core( if (!termination_completed) { /* The request to terminate has timed out. */ - spin_lock_irqsave(&isci_host->scic_lock, + spin_lock_irqsave(&ihost->scic_lock, flags); /* Check for state changes. */ @@ -623,12 +621,12 @@ static void isci_terminate_request_core( } else termination_completed = 1; - spin_unlock_irqrestore(&isci_host->scic_lock, + spin_unlock_irqrestore(&ihost->scic_lock, flags); if (!termination_completed) { - dev_err(&isci_host->pdev->dev, + dev_err(&ihost->pdev->dev, "%s: *** Timeout waiting for " "termination(%p/%p)\n", __func__, io_request_completion, @@ -642,7 +640,7 @@ static void isci_terminate_request_core( } } if (termination_completed) - dev_dbg(&isci_host->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: after completion wait (%p/%p)\n", __func__, isci_request, io_request_completion); } @@ -678,7 +676,7 @@ static void isci_terminate_request_core( } if (needs_cleanup_handling) isci_request_cleanup_completed_loiterer( - isci_host, idev, isci_request, task); + ihost, idev, isci_request, task); } } @@ -1253,7 +1251,7 @@ isci_task_request_complete(struct isci_host *ihost, /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; - scic_controller_complete_io(&ihost->sci, ireq->target_device, ireq); + scic_controller_complete_io(ihost, ireq->target_device, ireq); /* set the 'terminated' flag handle to make sure it cannot be terminated * or completed again. */ diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c index 680582d..a0e6f89 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.c +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -57,9 +57,9 @@ #include "unsolicited_frame_control.h" #include "registers.h" -int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic) +int scic_sds_unsolicited_frame_control_construct(struct isci_host *ihost) { - struct scic_sds_unsolicited_frame_control *uf_control = &scic->uf_control; + struct scic_sds_unsolicited_frame_control *uf_control = &ihost->uf_control; struct scic_sds_unsolicited_frame *uf; u32 buf_len, header_len, i; dma_addr_t dma; @@ -79,7 +79,7 @@ int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *sci * memory descriptor entry. The headers and address table will be * placed after the buffers. */ - virt = dmam_alloc_coherent(scic_to_dev(scic), size, &dma, GFP_KERNEL); + virt = dmam_alloc_coherent(&ihost->pdev->dev, size, &dma, GFP_KERNEL); if (!virt) return -ENOMEM; diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h index 2954904..c0285a3 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.h +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -214,9 +214,9 @@ struct scic_sds_unsolicited_frame_control { }; -struct scic_sds_controller; +struct isci_host; -int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic); +int scic_sds_unsolicited_frame_control_construct(struct isci_host *ihost); enum sci_status scic_sds_unsolicited_frame_control_get_header( struct scic_sds_unsolicited_frame_control *uf_control, -- cgit v0.10.2 From 89a7301f21fb00e753089671eb9e4132aab8ea08 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 30 Jun 2011 19:14:33 -0700 Subject: isci: retire scic_sds_ and scic_ prefixes The distinction between scic_sds_ scic_ and sci_ are no longer relevant so just unify the prefixes on sci_. The distinction between isci_ and sci_ is historically significant, and useful for comparing the old 'core' to the current Linux driver. 'sci_' represents the former core as well as the routines that are closer to the hardware and protocol than their 'isci_' brethren. sci == sas controller interface. Also unwind the 'sds1' out of the parameter structs. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index bb298f8..f31f64e 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -180,8 +180,7 @@ void sci_change_state(struct sci_base_state_machine *sm, u32 next_state) handler(sm); } -static bool scic_sds_controller_completion_queue_has_entries( - struct isci_host *ihost) +static bool sci_controller_completion_queue_has_entries(struct isci_host *ihost) { u32 get_value = ihost->completion_queue_get; u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; @@ -193,9 +192,9 @@ static bool scic_sds_controller_completion_queue_has_entries( return false; } -static bool scic_sds_controller_isr(struct isci_host *ihost) +static bool sci_controller_isr(struct isci_host *ihost) { - if (scic_sds_controller_completion_queue_has_entries(ihost)) { + if (sci_controller_completion_queue_has_entries(ihost)) { return true; } else { /* @@ -219,13 +218,13 @@ irqreturn_t isci_msix_isr(int vec, void *data) { struct isci_host *ihost = data; - if (scic_sds_controller_isr(ihost)) + if (sci_controller_isr(ihost)) tasklet_schedule(&ihost->completion_tasklet); return IRQ_HANDLED; } -static bool scic_sds_controller_error_isr(struct isci_host *ihost) +static bool sci_controller_error_isr(struct isci_host *ihost) { u32 interrupt_status; @@ -252,35 +251,35 @@ static bool scic_sds_controller_error_isr(struct isci_host *ihost) return false; } -static void scic_sds_controller_task_completion(struct isci_host *ihost, - u32 completion_entry) +static void sci_controller_task_completion(struct isci_host *ihost, u32 ent) { - u32 index = SCU_GET_COMPLETION_INDEX(completion_entry); + u32 index = SCU_GET_COMPLETION_INDEX(ent); struct isci_request *ireq = ihost->reqs[index]; /* Make sure that we really want to process this IO request */ if (test_bit(IREQ_ACTIVE, &ireq->flags) && ireq->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && ISCI_TAG_SEQ(ireq->io_tag) == ihost->io_request_sequence[index]) - /* Yep this is a valid io request pass it along to the io request handler */ - scic_sds_io_request_tc_completion(ireq, completion_entry); + /* Yep this is a valid io request pass it along to the + * io request handler + */ + sci_io_request_tc_completion(ireq, ent); } -static void scic_sds_controller_sdma_completion(struct isci_host *ihost, - u32 completion_entry) +static void sci_controller_sdma_completion(struct isci_host *ihost, u32 ent) { u32 index; struct isci_request *ireq; struct isci_remote_device *idev; - index = SCU_GET_COMPLETION_INDEX(completion_entry); + index = SCU_GET_COMPLETION_INDEX(ent); - switch (scu_get_command_request_type(completion_entry)) { + switch (scu_get_command_request_type(ent)) { case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: ireq = ihost->reqs[index]; dev_warn(&ihost->pdev->dev, "%s: %x for io request %p\n", - __func__, completion_entry, ireq); + __func__, ent, ireq); /* @todo For a post TC operation we need to fail the IO * request */ @@ -290,20 +289,19 @@ static void scic_sds_controller_sdma_completion(struct isci_host *ihost, case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: idev = ihost->device_table[index]; dev_warn(&ihost->pdev->dev, "%s: %x for device %p\n", - __func__, completion_entry, idev); + __func__, ent, idev); /* @todo For a port RNC operation we need to fail the * device */ break; default: dev_warn(&ihost->pdev->dev, "%s: unknown completion type %x\n", - __func__, completion_entry); + __func__, ent); break; } } -static void scic_sds_controller_unsolicited_frame(struct isci_host *ihost, - u32 completion_entry) +static void sci_controller_unsolicited_frame(struct isci_host *ihost, u32 ent) { u32 index; u32 frame_index; @@ -314,36 +312,36 @@ static void scic_sds_controller_unsolicited_frame(struct isci_host *ihost, enum sci_status result = SCI_FAILURE; - frame_index = SCU_GET_FRAME_INDEX(completion_entry); + frame_index = SCU_GET_FRAME_INDEX(ent); frame_header = ihost->uf_control.buffers.array[frame_index].header; ihost->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; - if (SCU_GET_FRAME_ERROR(completion_entry)) { + if (SCU_GET_FRAME_ERROR(ent)) { /* * / @todo If the IAF frame or SIGNATURE FIS frame has an error will * / this cause a problem? We expect the phy initialization will * / fail if there is an error in the frame. */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return; } if (frame_header->is_address_frame) { - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); iphy = &ihost->phys[index]; - result = scic_sds_phy_frame_handler(iphy, frame_index); + result = sci_phy_frame_handler(iphy, frame_index); } else { - index = SCU_GET_COMPLETION_INDEX(completion_entry); + index = SCU_GET_COMPLETION_INDEX(ent); if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { /* * This is a signature fis or a frame from a direct attached SATA * device that has not yet been created. In either case forwared * the frame to the PE and let it take care of the frame data. */ - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); iphy = &ihost->phys[index]; - result = scic_sds_phy_frame_handler(iphy, frame_index); + result = sci_phy_frame_handler(iphy, frame_index); } else { if (index < ihost->remote_node_entries) idev = ihost->device_table[index]; @@ -351,9 +349,9 @@ static void scic_sds_controller_unsolicited_frame(struct isci_host *ihost, idev = NULL; if (idev != NULL) - result = scic_sds_remote_device_frame_handler(idev, frame_index); + result = sci_remote_device_frame_handler(idev, frame_index); else - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); } } @@ -364,17 +362,16 @@ static void scic_sds_controller_unsolicited_frame(struct isci_host *ihost, } } -static void scic_sds_controller_event_completion(struct isci_host *ihost, - u32 completion_entry) +static void sci_controller_event_completion(struct isci_host *ihost, u32 ent) { struct isci_remote_device *idev; struct isci_request *ireq; struct isci_phy *iphy; u32 index; - index = SCU_GET_COMPLETION_INDEX(completion_entry); + index = SCU_GET_COMPLETION_INDEX(ent); - switch (scu_get_event_type(completion_entry)) { + switch (scu_get_event_type(ent)) { case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: /* / @todo The driver did something wrong and we need to fix the condtion. */ dev_err(&ihost->pdev->dev, @@ -382,7 +379,7 @@ static void scic_sds_controller_event_completion(struct isci_host *ihost, "0x%x\n", __func__, ihost, - completion_entry); + ent); break; case SCU_EVENT_TYPE_SMU_PCQ_ERROR: @@ -396,21 +393,21 @@ static void scic_sds_controller_event_completion(struct isci_host *ihost, "event 0x%x\n", __func__, ihost, - completion_entry); + ent); break; case SCU_EVENT_TYPE_TRANSPORT_ERROR: ireq = ihost->reqs[index]; - scic_sds_io_request_event_handler(ireq, completion_entry); + sci_io_request_event_handler(ireq, ent); break; case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: - switch (scu_get_event_specifier(completion_entry)) { + switch (scu_get_event_specifier(ent)) { case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: ireq = ihost->reqs[index]; if (ireq != NULL) - scic_sds_io_request_event_handler(ireq, completion_entry); + sci_io_request_event_handler(ireq, ent); else dev_warn(&ihost->pdev->dev, "%s: SCIC Controller 0x%p received " @@ -418,14 +415,14 @@ static void scic_sds_controller_event_completion(struct isci_host *ihost, "that doesnt exist.\n", __func__, ihost, - completion_entry); + ent); break; case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: idev = ihost->device_table[index]; if (idev != NULL) - scic_sds_remote_device_event_handler(idev, completion_entry); + sci_remote_device_event_handler(idev, ent); else dev_warn(&ihost->pdev->dev, "%s: SCIC Controller 0x%p received " @@ -433,7 +430,7 @@ static void scic_sds_controller_event_completion(struct isci_host *ihost, "that doesnt exist.\n", __func__, ihost, - completion_entry); + ent); break; } @@ -448,9 +445,9 @@ static void scic_sds_controller_event_completion(struct isci_host *ihost, * direct error counter event to the phy object since that is where * we get the event notification. This is a type 4 event. */ case SCU_EVENT_TYPE_OSSP_EVENT: - index = SCU_GET_PROTOCOL_ENGINE_INDEX(completion_entry); + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); iphy = &ihost->phys[index]; - scic_sds_phy_event_handler(iphy, completion_entry); + sci_phy_event_handler(iphy, ent); break; case SCU_EVENT_TYPE_RNC_SUSPEND_TX: @@ -460,7 +457,7 @@ static void scic_sds_controller_event_completion(struct isci_host *ihost, idev = ihost->device_table[index]; if (idev != NULL) - scic_sds_remote_device_event_handler(idev, completion_entry); + sci_remote_device_event_handler(idev, ent); } else dev_err(&ihost->pdev->dev, "%s: SCIC Controller 0x%p received event 0x%x " @@ -468,7 +465,7 @@ static void scic_sds_controller_event_completion(struct isci_host *ihost, "exist.\n", __func__, ihost, - completion_entry, + ent, index); break; @@ -477,15 +474,15 @@ static void scic_sds_controller_event_completion(struct isci_host *ihost, dev_warn(&ihost->pdev->dev, "%s: SCIC Controller received unknown event code %x\n", __func__, - completion_entry); + ent); break; } } -static void scic_sds_controller_process_completions(struct isci_host *ihost) +static void sci_controller_process_completions(struct isci_host *ihost) { u32 completion_count = 0; - u32 completion_entry; + u32 ent; u32 get_index; u32 get_cycle; u32 event_get; @@ -509,7 +506,7 @@ static void scic_sds_controller_process_completions(struct isci_host *ihost) ) { completion_count++; - completion_entry = ihost->completion_queue[get_index]; + ent = ihost->completion_queue[get_index]; /* increment the get pointer and check for rollover to toggle the cycle bit */ get_cycle ^= ((get_index+1) & SCU_MAX_COMPLETION_QUEUE_ENTRIES) << @@ -519,19 +516,19 @@ static void scic_sds_controller_process_completions(struct isci_host *ihost) dev_dbg(&ihost->pdev->dev, "%s: completion queue entry:0x%08x\n", __func__, - completion_entry); + ent); - switch (SCU_GET_COMPLETION_TYPE(completion_entry)) { + switch (SCU_GET_COMPLETION_TYPE(ent)) { case SCU_COMPLETION_TYPE_TASK: - scic_sds_controller_task_completion(ihost, completion_entry); + sci_controller_task_completion(ihost, ent); break; case SCU_COMPLETION_TYPE_SDMA: - scic_sds_controller_sdma_completion(ihost, completion_entry); + sci_controller_sdma_completion(ihost, ent); break; case SCU_COMPLETION_TYPE_UFI: - scic_sds_controller_unsolicited_frame(ihost, completion_entry); + sci_controller_unsolicited_frame(ihost, ent); break; case SCU_COMPLETION_TYPE_EVENT: @@ -540,7 +537,7 @@ static void scic_sds_controller_process_completions(struct isci_host *ihost) (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT); event_get = (event_get+1) & (SCU_MAX_EVENTS-1); - scic_sds_controller_event_completion(ihost, completion_entry); + sci_controller_event_completion(ihost, ent); break; } default: @@ -548,7 +545,7 @@ static void scic_sds_controller_process_completions(struct isci_host *ihost) "%s: SCIC Controller received unknown " "completion type %x\n", __func__, - completion_entry); + ent); break; } } @@ -575,7 +572,7 @@ static void scic_sds_controller_process_completions(struct isci_host *ihost) } -static void scic_sds_controller_error_handler(struct isci_host *ihost) +static void sci_controller_error_handler(struct isci_host *ihost) { u32 interrupt_status; @@ -583,9 +580,9 @@ static void scic_sds_controller_error_handler(struct isci_host *ihost) readl(&ihost->smu_registers->interrupt_status); if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && - scic_sds_controller_completion_queue_has_entries(ihost)) { + sci_controller_completion_queue_has_entries(ihost)) { - scic_sds_controller_process_completions(ihost); + sci_controller_process_completions(ihost); writel(SMU_ISR_QUEUE_SUSPEND, &ihost->smu_registers->interrupt_status); } else { dev_err(&ihost->pdev->dev, "%s: status: %#x\n", __func__, @@ -607,13 +604,13 @@ irqreturn_t isci_intx_isr(int vec, void *data) irqreturn_t ret = IRQ_NONE; struct isci_host *ihost = data; - if (scic_sds_controller_isr(ihost)) { + if (sci_controller_isr(ihost)) { writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); tasklet_schedule(&ihost->completion_tasklet); ret = IRQ_HANDLED; - } else if (scic_sds_controller_error_isr(ihost)) { + } else if (sci_controller_error_isr(ihost)) { spin_lock(&ihost->scic_lock); - scic_sds_controller_error_handler(ihost); + sci_controller_error_handler(ihost); spin_unlock(&ihost->scic_lock); ret = IRQ_HANDLED; } @@ -625,8 +622,8 @@ irqreturn_t isci_error_isr(int vec, void *data) { struct isci_host *ihost = data; - if (scic_sds_controller_error_isr(ihost)) - scic_sds_controller_error_handler(ihost); + if (sci_controller_error_isr(ihost)) + sci_controller_error_handler(ihost); return IRQ_HANDLED; } @@ -670,8 +667,8 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) } /** - * scic_controller_get_suggested_start_timeout() - This method returns the - * suggested scic_controller_start() timeout amount. The user is free to + * sci_controller_get_suggested_start_timeout() - This method returns the + * suggested sci_controller_start() timeout amount. The user is free to * use any timeout value, but this method provides the suggested minimum * start timeout value. The returned value is based upon empirical * information determined as a result of interoperability testing. @@ -681,7 +678,7 @@ int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) * This method returns the number of milliseconds for the suggested start * operation timeout. */ -static u32 scic_controller_get_suggested_start_timeout(struct isci_host *ihost) +static u32 sci_controller_get_suggested_start_timeout(struct isci_host *ihost) { /* Validate the user supplied parameters. */ if (!ihost) @@ -706,19 +703,19 @@ static u32 scic_controller_get_suggested_start_timeout(struct isci_host *ihost) + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); } -static void scic_controller_enable_interrupts(struct isci_host *ihost) +static void sci_controller_enable_interrupts(struct isci_host *ihost) { BUG_ON(ihost->smu_registers == NULL); writel(0, &ihost->smu_registers->interrupt_mask); } -void scic_controller_disable_interrupts(struct isci_host *ihost) +void sci_controller_disable_interrupts(struct isci_host *ihost) { BUG_ON(ihost->smu_registers == NULL); writel(0xffffffff, &ihost->smu_registers->interrupt_mask); } -static void scic_sds_controller_enable_port_task_scheduler(struct isci_host *ihost) +static void sci_controller_enable_port_task_scheduler(struct isci_host *ihost) { u32 port_task_scheduler_value; @@ -731,7 +728,7 @@ static void scic_sds_controller_enable_port_task_scheduler(struct isci_host *iho &ihost->scu_registers->peg0.ptsg.control); } -static void scic_sds_controller_assign_task_entries(struct isci_host *ihost) +static void sci_controller_assign_task_entries(struct isci_host *ihost) { u32 task_assignment; @@ -752,7 +749,7 @@ static void scic_sds_controller_assign_task_entries(struct isci_host *ihost) } -static void scic_sds_controller_initialize_completion_queue(struct isci_host *ihost) +static void sci_controller_initialize_completion_queue(struct isci_host *ihost) { u32 index; u32 completion_queue_control_value; @@ -799,7 +796,7 @@ static void scic_sds_controller_initialize_completion_queue(struct isci_host *ih } } -static void scic_sds_controller_initialize_unsolicited_frame_queue(struct isci_host *ihost) +static void sci_controller_initialize_unsolicited_frame_queue(struct isci_host *ihost) { u32 frame_queue_control_value; u32 frame_queue_get_value; @@ -826,22 +823,8 @@ static void scic_sds_controller_initialize_unsolicited_frame_queue(struct isci_h &ihost->scu_registers->sdma.unsolicited_frame_put_pointer); } -/** - * This method will attempt to transition into the ready state for the - * controller and indicate that the controller start operation has completed - * if all criteria are met. - * @scic: This parameter indicates the controller object for which - * to transition to ready. - * @status: This parameter indicates the status value to be pass into the call - * to scic_cb_controller_start_complete(). - * - * none. - */ -static void scic_sds_controller_transition_to_ready( - struct isci_host *ihost, - enum sci_status status) +static void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status) { - if (ihost->sm.current_state_id == SCIC_STARTING) { /* * We move into the ready state, because some of the phys/ports @@ -855,7 +838,7 @@ static void scic_sds_controller_transition_to_ready( static bool is_phy_starting(struct isci_phy *iphy) { - enum scic_sds_phy_states state; + enum sci_phy_states state; state = iphy->sm.current_state_id; switch (state) { @@ -876,16 +859,16 @@ static bool is_phy_starting(struct isci_phy *iphy) } /** - * scic_sds_controller_start_next_phy - start phy + * sci_controller_start_next_phy - start phy * @scic: controller * * If all the phys have been started, then attempt to transition the * controller to the READY state and inform the user - * (scic_cb_controller_start_complete()). + * (sci_cb_controller_start_complete()). */ -static enum sci_status scic_sds_controller_start_next_phy(struct isci_host *ihost) +static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost) { - struct scic_sds_oem_params *oem = &ihost->oem_parameters.sds1; + struct sci_oem_params *oem = &ihost->oem_parameters; struct isci_phy *iphy; enum sci_status status; @@ -924,7 +907,7 @@ static enum sci_status scic_sds_controller_start_next_phy(struct isci_host *ihos * The controller has successfully finished the start process. * Inform the SCI Core user and transition to the READY state. */ if (is_controller_start_complete == true) { - scic_sds_controller_transition_to_ready(ihost, SCI_SUCCESS); + sci_controller_transition_to_ready(ihost, SCI_SUCCESS); sci_del_timer(&ihost->phy_timer); ihost->phy_startup_timer_pending = false; } @@ -944,11 +927,11 @@ static enum sci_status scic_sds_controller_start_next_phy(struct isci_host *ihos * incorrectly for the PORT or it was never * assigned to a PORT */ - return scic_sds_controller_start_next_phy(ihost); + return sci_controller_start_next_phy(ihost); } } - status = scic_sds_phy_start(iphy); + status = sci_phy_start(iphy); if (status == SCI_SUCCESS) { sci_mod_timer(&ihost->phy_timer, @@ -985,7 +968,7 @@ static void phy_startup_timeout(unsigned long data) ihost->phy_startup_timer_pending = false; do { - status = scic_sds_controller_start_next_phy(ihost); + status = sci_controller_start_next_phy(ihost); } while (status != SCI_SUCCESS); done: @@ -997,7 +980,7 @@ static u16 isci_tci_active(struct isci_host *ihost) return CIRC_CNT(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); } -static enum sci_status scic_controller_start(struct isci_host *ihost, +static enum sci_status sci_controller_start(struct isci_host *ihost, u32 timeout) { enum sci_status result; @@ -1018,38 +1001,37 @@ static enum sci_status scic_controller_start(struct isci_host *ihost, isci_tci_free(ihost, index); /* Build the RNi free pool */ - scic_sds_remote_node_table_initialize( - &ihost->available_remote_nodes, - ihost->remote_node_entries); + sci_remote_node_table_initialize(&ihost->available_remote_nodes, + ihost->remote_node_entries); /* * Before anything else lets make sure we will not be * interrupted by the hardware. */ - scic_controller_disable_interrupts(ihost); + sci_controller_disable_interrupts(ihost); /* Enable the port task scheduler */ - scic_sds_controller_enable_port_task_scheduler(ihost); + sci_controller_enable_port_task_scheduler(ihost); /* Assign all the task entries to ihost physical function */ - scic_sds_controller_assign_task_entries(ihost); + sci_controller_assign_task_entries(ihost); /* Now initialize the completion queue */ - scic_sds_controller_initialize_completion_queue(ihost); + sci_controller_initialize_completion_queue(ihost); /* Initialize the unsolicited frame queue for use */ - scic_sds_controller_initialize_unsolicited_frame_queue(ihost); + sci_controller_initialize_unsolicited_frame_queue(ihost); /* Start all of the ports on this controller */ for (index = 0; index < ihost->logical_port_entries; index++) { struct isci_port *iport = &ihost->ports[index]; - result = scic_sds_port_start(iport); + result = sci_port_start(iport); if (result) return result; } - scic_sds_controller_start_next_phy(ihost); + sci_controller_start_next_phy(ihost); sci_mod_timer(&ihost->timer, timeout); @@ -1061,29 +1043,29 @@ static enum sci_status scic_controller_start(struct isci_host *ihost, void isci_host_scan_start(struct Scsi_Host *shost) { struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; - unsigned long tmo = scic_controller_get_suggested_start_timeout(ihost); + unsigned long tmo = sci_controller_get_suggested_start_timeout(ihost); set_bit(IHOST_START_PENDING, &ihost->flags); spin_lock_irq(&ihost->scic_lock); - scic_controller_start(ihost, tmo); - scic_controller_enable_interrupts(ihost); + sci_controller_start(ihost, tmo); + sci_controller_enable_interrupts(ihost); spin_unlock_irq(&ihost->scic_lock); } static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) { isci_host_change_state(ihost, isci_stopped); - scic_controller_disable_interrupts(ihost); + sci_controller_disable_interrupts(ihost); clear_bit(IHOST_STOP_PENDING, &ihost->flags); wake_up(&ihost->eventq); } -static void scic_sds_controller_completion_handler(struct isci_host *ihost) +static void sci_controller_completion_handler(struct isci_host *ihost) { /* Empty out the completion queue */ - if (scic_sds_controller_completion_queue_has_entries(ihost)) - scic_sds_controller_process_completions(ihost); + if (sci_controller_completion_queue_has_entries(ihost)) + sci_controller_process_completions(ihost); /* Clear the interrupt and enable all interrupts again */ writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); @@ -1116,7 +1098,7 @@ static void isci_host_completion_routine(unsigned long data) spin_lock_irq(&ihost->scic_lock); - scic_sds_controller_completion_handler(ihost); + sci_controller_completion_handler(ihost); /* Take the lists of completed I/Os from the host. */ @@ -1203,7 +1185,7 @@ static void isci_host_completion_routine(unsigned long data) } /** - * scic_controller_stop() - This method will stop an individual controller + * sci_controller_stop() - This method will stop an individual controller * object.This method will invoke the associated user callback upon * completion. The completion callback is called when the following * conditions are met: -# the method return status is SCI_SUCCESS. -# the @@ -1220,8 +1202,7 @@ static void isci_host_completion_routine(unsigned long data) * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the * controller is not either in the STARTED or STOPPED states. */ -static enum sci_status scic_controller_stop(struct isci_host *ihost, - u32 timeout) +static enum sci_status sci_controller_stop(struct isci_host *ihost, u32 timeout) { if (ihost->sm.current_state_id != SCIC_READY) { dev_warn(&ihost->pdev->dev, @@ -1236,7 +1217,7 @@ static enum sci_status scic_controller_stop(struct isci_host *ihost, } /** - * scic_controller_reset() - This method will reset the supplied core + * sci_controller_reset() - This method will reset the supplied core * controller regardless of the state of said controller. This operation is * considered destructive. In other words, all current operations are wiped * out. No IO completions for outstanding devices occur. Outstanding IO @@ -1247,7 +1228,7 @@ static enum sci_status scic_controller_stop(struct isci_host *ihost, * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if * the controller reset operation is unable to complete. */ -static enum sci_status scic_controller_reset(struct isci_host *ihost) +static enum sci_status sci_controller_reset(struct isci_host *ihost) { switch (ihost->sm.current_state_id) { case SCIC_RESET: @@ -1286,11 +1267,11 @@ void isci_host_deinit(struct isci_host *ihost) set_bit(IHOST_STOP_PENDING, &ihost->flags); spin_lock_irq(&ihost->scic_lock); - scic_controller_stop(ihost, SCIC_CONTROLLER_STOP_TIMEOUT); + sci_controller_stop(ihost, SCIC_CONTROLLER_STOP_TIMEOUT); spin_unlock_irq(&ihost->scic_lock); wait_for_stop(ihost); - scic_controller_reset(ihost); + sci_controller_reset(ihost); /* Cancel any/all outstanding port timers */ for (i = 0; i < ihost->logical_port_entries; i++) { @@ -1329,11 +1310,8 @@ static void __iomem *smu_base(struct isci_host *isci_host) return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id; } -static void isci_user_parameters_get( - struct isci_host *isci_host, - union scic_user_parameters *scic_user_params) +static void isci_user_parameters_get(struct sci_user_parameters *u) { - struct scic_sds_user_parameters *u = &scic_user_params->sds1; int i; for (i = 0; i < SCI_MAX_PHYS; i++) { @@ -1355,14 +1333,14 @@ static void isci_user_parameters_get( u->max_number_concurrent_device_spin_up = max_concurr_spinup; } -static void scic_sds_controller_initial_state_enter(struct sci_base_state_machine *sm) +static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm) { struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); sci_change_state(&ihost->sm, SCIC_RESET); } -static inline void scic_sds_controller_starting_state_exit(struct sci_base_state_machine *sm) +static inline void sci_controller_starting_state_exit(struct sci_base_state_machine *sm) { struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); @@ -1377,7 +1355,7 @@ static inline void scic_sds_controller_starting_state_exit(struct sci_base_state #define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 /** - * scic_controller_set_interrupt_coalescence() - This method allows the user to + * sci_controller_set_interrupt_coalescence() - This method allows the user to * configure the interrupt coalescence. * @controller: This parameter represents the handle to the controller object * for which its interrupt coalesce register is overridden. @@ -1394,9 +1372,9 @@ static inline void scic_sds_controller_starting_state_exit(struct sci_base_state * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. */ static enum sci_status -scic_controller_set_interrupt_coalescence(struct isci_host *ihost, - u32 coalesce_number, - u32 coalesce_timeout) +sci_controller_set_interrupt_coalescence(struct isci_host *ihost, + u32 coalesce_number, + u32 coalesce_timeout) { u8 timeout_encode = 0; u32 min = 0; @@ -1489,23 +1467,23 @@ scic_controller_set_interrupt_coalescence(struct isci_host *ihost, } -static void scic_sds_controller_ready_state_enter(struct sci_base_state_machine *sm) +static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm) { struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* set the default interrupt coalescence number and timeout value. */ - scic_controller_set_interrupt_coalescence(ihost, 0x10, 250); + sci_controller_set_interrupt_coalescence(ihost, 0x10, 250); } -static void scic_sds_controller_ready_state_exit(struct sci_base_state_machine *sm) +static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm) { struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* disable interrupt coalescence. */ - scic_controller_set_interrupt_coalescence(ihost, 0, 0); + sci_controller_set_interrupt_coalescence(ihost, 0, 0); } -static enum sci_status scic_sds_controller_stop_phys(struct isci_host *ihost) +static enum sci_status sci_controller_stop_phys(struct isci_host *ihost) { u32 index; enum sci_status status; @@ -1514,7 +1492,7 @@ static enum sci_status scic_sds_controller_stop_phys(struct isci_host *ihost) status = SCI_SUCCESS; for (index = 0; index < SCI_MAX_PHYS; index++) { - phy_status = scic_sds_phy_stop(&ihost->phys[index]); + phy_status = sci_phy_stop(&ihost->phys[index]); if (phy_status != SCI_SUCCESS && phy_status != SCI_FAILURE_INVALID_STATE) { @@ -1531,7 +1509,7 @@ static enum sci_status scic_sds_controller_stop_phys(struct isci_host *ihost) return status; } -static enum sci_status scic_sds_controller_stop_ports(struct isci_host *ihost) +static enum sci_status sci_controller_stop_ports(struct isci_host *ihost) { u32 index; enum sci_status port_status; @@ -1540,7 +1518,7 @@ static enum sci_status scic_sds_controller_stop_ports(struct isci_host *ihost) for (index = 0; index < ihost->logical_port_entries; index++) { struct isci_port *iport = &ihost->ports[index]; - port_status = scic_sds_port_stop(iport); + port_status = sci_port_stop(iport); if ((port_status != SCI_SUCCESS) && (port_status != SCI_FAILURE_INVALID_STATE)) { @@ -1558,7 +1536,7 @@ static enum sci_status scic_sds_controller_stop_ports(struct isci_host *ihost) return status; } -static enum sci_status scic_sds_controller_stop_devices(struct isci_host *ihost) +static enum sci_status sci_controller_stop_devices(struct isci_host *ihost) { u32 index; enum sci_status status; @@ -1569,7 +1547,7 @@ static enum sci_status scic_sds_controller_stop_devices(struct isci_host *ihost) for (index = 0; index < ihost->remote_node_entries; index++) { if (ihost->device_table[index] != NULL) { /* / @todo What timeout value do we want to provide to this request? */ - device_status = scic_remote_device_stop(ihost->device_table[index], 0); + device_status = sci_remote_device_stop(ihost->device_table[index], 0); if ((device_status != SCI_SUCCESS) && (device_status != SCI_FAILURE_INVALID_STATE)) { @@ -1586,33 +1564,27 @@ static enum sci_status scic_sds_controller_stop_devices(struct isci_host *ihost) return status; } -static void scic_sds_controller_stopping_state_enter(struct sci_base_state_machine *sm) +static void sci_controller_stopping_state_enter(struct sci_base_state_machine *sm) { struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* Stop all of the components for this controller */ - scic_sds_controller_stop_phys(ihost); - scic_sds_controller_stop_ports(ihost); - scic_sds_controller_stop_devices(ihost); + sci_controller_stop_phys(ihost); + sci_controller_stop_ports(ihost); + sci_controller_stop_devices(ihost); } -static void scic_sds_controller_stopping_state_exit(struct sci_base_state_machine *sm) +static void sci_controller_stopping_state_exit(struct sci_base_state_machine *sm) { struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); sci_del_timer(&ihost->timer); } - -/** - * scic_sds_controller_reset_hardware() - - * - * This method will reset the controller hardware. - */ -static void scic_sds_controller_reset_hardware(struct isci_host *ihost) +static void sci_controller_reset_hardware(struct isci_host *ihost) { /* Disable interrupts so we dont take any spurious interrupts */ - scic_controller_disable_interrupts(ihost); + sci_controller_disable_interrupts(ihost); /* Reset the SCU */ writel(0xFFFFFFFF, &ihost->smu_registers->soft_reset_control); @@ -1627,82 +1599,82 @@ static void scic_sds_controller_reset_hardware(struct isci_host *ihost) writel(0, &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); } -static void scic_sds_controller_resetting_state_enter(struct sci_base_state_machine *sm) +static void sci_controller_resetting_state_enter(struct sci_base_state_machine *sm) { struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); - scic_sds_controller_reset_hardware(ihost); + sci_controller_reset_hardware(ihost); sci_change_state(&ihost->sm, SCIC_RESET); } -static const struct sci_base_state scic_sds_controller_state_table[] = { +static const struct sci_base_state sci_controller_state_table[] = { [SCIC_INITIAL] = { - .enter_state = scic_sds_controller_initial_state_enter, + .enter_state = sci_controller_initial_state_enter, }, [SCIC_RESET] = {}, [SCIC_INITIALIZING] = {}, [SCIC_INITIALIZED] = {}, [SCIC_STARTING] = { - .exit_state = scic_sds_controller_starting_state_exit, + .exit_state = sci_controller_starting_state_exit, }, [SCIC_READY] = { - .enter_state = scic_sds_controller_ready_state_enter, - .exit_state = scic_sds_controller_ready_state_exit, + .enter_state = sci_controller_ready_state_enter, + .exit_state = sci_controller_ready_state_exit, }, [SCIC_RESETTING] = { - .enter_state = scic_sds_controller_resetting_state_enter, + .enter_state = sci_controller_resetting_state_enter, }, [SCIC_STOPPING] = { - .enter_state = scic_sds_controller_stopping_state_enter, - .exit_state = scic_sds_controller_stopping_state_exit, + .enter_state = sci_controller_stopping_state_enter, + .exit_state = sci_controller_stopping_state_exit, }, [SCIC_STOPPED] = {}, [SCIC_FAILED] = {} }; -static void scic_sds_controller_set_default_config_parameters(struct isci_host *ihost) +static void sci_controller_set_default_config_parameters(struct isci_host *ihost) { /* these defaults are overridden by the platform / firmware */ u16 index; /* Default to APC mode. */ - ihost->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; + ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; /* Default to APC mode. */ - ihost->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1; + ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1; /* Default to no SSC operation. */ - ihost->oem_parameters.sds1.controller.do_enable_ssc = false; + ihost->oem_parameters.controller.do_enable_ssc = false; /* Initialize all of the port parameter information to narrow ports. */ for (index = 0; index < SCI_MAX_PORTS; index++) { - ihost->oem_parameters.sds1.ports[index].phy_mask = 0; + ihost->oem_parameters.ports[index].phy_mask = 0; } /* Initialize all of the phy parameter information. */ for (index = 0; index < SCI_MAX_PHYS; index++) { /* Default to 6G (i.e. Gen 3) for now. */ - ihost->user_parameters.sds1.phys[index].max_speed_generation = 3; + ihost->user_parameters.phys[index].max_speed_generation = 3; /* the frequencies cannot be 0 */ - ihost->user_parameters.sds1.phys[index].align_insertion_frequency = 0x7f; - ihost->user_parameters.sds1.phys[index].in_connection_align_insertion_frequency = 0xff; - ihost->user_parameters.sds1.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; + ihost->user_parameters.phys[index].align_insertion_frequency = 0x7f; + ihost->user_parameters.phys[index].in_connection_align_insertion_frequency = 0xff; + ihost->user_parameters.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; /* * Previous Vitesse based expanders had a arbitration issue that * is worked around by having the upper 32-bits of SAS address * with a value greater then the Vitesse company identifier. * Hence, usage of 0x5FCFFFFF. */ - ihost->oem_parameters.sds1.phys[index].sas_address.low = 0x1 + ihost->id; - ihost->oem_parameters.sds1.phys[index].sas_address.high = 0x5FCFFFFF; + ihost->oem_parameters.phys[index].sas_address.low = 0x1 + ihost->id; + ihost->oem_parameters.phys[index].sas_address.high = 0x5FCFFFFF; } - ihost->user_parameters.sds1.stp_inactivity_timeout = 5; - ihost->user_parameters.sds1.ssp_inactivity_timeout = 5; - ihost->user_parameters.sds1.stp_max_occupancy_timeout = 5; - ihost->user_parameters.sds1.ssp_max_occupancy_timeout = 20; - ihost->user_parameters.sds1.no_outbound_task_timeout = 20; + ihost->user_parameters.stp_inactivity_timeout = 5; + ihost->user_parameters.ssp_inactivity_timeout = 5; + ihost->user_parameters.stp_max_occupancy_timeout = 5; + ihost->user_parameters.ssp_max_occupancy_timeout = 20; + ihost->user_parameters.no_outbound_task_timeout = 20; } static void controller_timeout(unsigned long data) @@ -1718,7 +1690,7 @@ static void controller_timeout(unsigned long data) goto done; if (sm->current_state_id == SCIC_STARTING) - scic_sds_controller_transition_to_ready(ihost, SCI_FAILURE_TIMEOUT); + sci_controller_transition_to_ready(ihost, SCI_FAILURE_TIMEOUT); else if (sm->current_state_id == SCIC_STOPPING) { sci_change_state(sm, SCIC_FAILED); isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); @@ -1732,45 +1704,29 @@ done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } -/** - * scic_controller_construct() - This method will attempt to construct a - * controller object utilizing the supplied parameter information. - * @c: This parameter specifies the controller to be constructed. - * @scu_base: mapped base address of the scu registers - * @smu_base: mapped base address of the smu registers - * - * Indicate if the controller was successfully constructed or if it failed in - * some way. SCI_SUCCESS This value is returned if the controller was - * successfully constructed. SCI_WARNING_TIMER_CONFLICT This value is returned - * if the interrupt coalescence timer may cause SAS compliance issues for SMP - * Target mode response processing. SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE - * This value is returned if the controller does not support the supplied type. - * SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned if the - * controller does not support the supplied initialization data version. - */ -static enum sci_status scic_controller_construct(struct isci_host *ihost, - void __iomem *scu_base, - void __iomem *smu_base) +static enum sci_status sci_controller_construct(struct isci_host *ihost, + void __iomem *scu_base, + void __iomem *smu_base) { u8 i; - sci_init_sm(&ihost->sm, scic_sds_controller_state_table, SCIC_INITIAL); + sci_init_sm(&ihost->sm, sci_controller_state_table, SCIC_INITIAL); ihost->scu_registers = scu_base; ihost->smu_registers = smu_base; - scic_sds_port_configuration_agent_construct(&ihost->port_agent); + sci_port_configuration_agent_construct(&ihost->port_agent); /* Construct the ports for this controller */ for (i = 0; i < SCI_MAX_PORTS; i++) - scic_sds_port_construct(&ihost->ports[i], i, ihost); - scic_sds_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, ihost); + sci_port_construct(&ihost->ports[i], i, ihost); + sci_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, ihost); /* Construct the phys for this controller */ for (i = 0; i < SCI_MAX_PHYS; i++) { /* Add all the PHYs to the dummy port */ - scic_sds_phy_construct(&ihost->phys[i], - &ihost->ports[SCI_MAX_PORTS], i); + sci_phy_construct(&ihost->phys[i], + &ihost->ports[SCI_MAX_PORTS], i); } ihost->invalid_phy_mask = 0; @@ -1778,12 +1734,12 @@ static enum sci_status scic_controller_construct(struct isci_host *ihost, sci_init_timer(&ihost->timer, controller_timeout); /* Initialize the User and OEM parameters to default values. */ - scic_sds_controller_set_default_config_parameters(ihost); + sci_controller_set_default_config_parameters(ihost); - return scic_controller_reset(ihost); + return sci_controller_reset(ihost); } -int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) +int sci_oem_parameters_validate(struct sci_oem_params *oem) { int i; @@ -1817,8 +1773,7 @@ int scic_oem_parameters_validate(struct scic_sds_oem_params *oem) return 0; } -static enum sci_status scic_oem_parameters_set(struct isci_host *ihost, - union scic_oem_parameters *scic_parms) +static enum sci_status sci_oem_parameters_set(struct isci_host *ihost) { u32 state = ihost->sm.current_state_id; @@ -1826,9 +1781,8 @@ static enum sci_status scic_oem_parameters_set(struct isci_host *ihost, state == SCIC_INITIALIZING || state == SCIC_INITIALIZED) { - if (scic_oem_parameters_validate(&scic_parms->sds1)) + if (sci_oem_parameters_validate(&ihost->oem_parameters)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - ihost->oem_parameters.sds1 = scic_parms->sds1; return SCI_SUCCESS; } @@ -1836,13 +1790,6 @@ static enum sci_status scic_oem_parameters_set(struct isci_host *ihost, return SCI_FAILURE_INVALID_STATE; } -void scic_oem_parameters_get( - struct isci_host *ihost, - union scic_oem_parameters *scic_parms) -{ - memcpy(scic_parms, (&ihost->oem_parameters), sizeof(*scic_parms)); -} - static void power_control_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; @@ -1873,13 +1820,13 @@ static void power_control_timeout(unsigned long data) continue; if (ihost->power_control.phys_granted_power >= - ihost->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) + ihost->oem_parameters.controller.max_concurrent_dev_spin_up) break; ihost->power_control.requesters[i] = NULL; ihost->power_control.phys_waiting--; ihost->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(iphy); + sci_phy_consume_power_handler(iphy); } /* @@ -1893,22 +1840,15 @@ done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } -/** - * This method inserts the phy in the stagger spinup control queue. - * @scic: - * - * - */ -void scic_sds_controller_power_control_queue_insert( - struct isci_host *ihost, - struct isci_phy *iphy) +void sci_controller_power_control_queue_insert(struct isci_host *ihost, + struct isci_phy *iphy) { BUG_ON(iphy == NULL); if (ihost->power_control.phys_granted_power < - ihost->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) { + ihost->oem_parameters.controller.max_concurrent_dev_spin_up) { ihost->power_control.phys_granted_power++; - scic_sds_phy_consume_power_handler(iphy); + sci_phy_consume_power_handler(iphy); /* * stop and start the power_control timer. When the timer fires, the @@ -1928,21 +1868,13 @@ void scic_sds_controller_power_control_queue_insert( } } -/** - * This method removes the phy from the stagger spinup control queue. - * @scic: - * - * - */ -void scic_sds_controller_power_control_queue_remove( - struct isci_host *ihost, - struct isci_phy *iphy) +void sci_controller_power_control_queue_remove(struct isci_host *ihost, + struct isci_phy *iphy) { BUG_ON(iphy == NULL); - if (ihost->power_control.requesters[iphy->phy_index] != NULL) { + if (ihost->power_control.requesters[iphy->phy_index]) ihost->power_control.phys_waiting--; - } ihost->power_control.requesters[iphy->phy_index] = NULL; } @@ -1952,9 +1884,9 @@ void scic_sds_controller_power_control_queue_remove( /* Initialize the AFE for this phy index. We need to read the AFE setup from * the OEM parameters */ -static void scic_sds_controller_afe_initialization(struct isci_host *ihost) +static void sci_controller_afe_initialization(struct isci_host *ihost) { - const struct scic_sds_oem_params *oem = &ihost->oem_parameters.sds1; + const struct sci_oem_params *oem = &ihost->oem_parameters; u32 afe_status; u32 phy_id; @@ -2111,7 +2043,7 @@ static void scic_sds_controller_afe_initialization(struct isci_host *ihost) udelay(AFE_REGISTER_WRITE_DELAY); } -static void scic_sds_controller_initialize_power_control(struct isci_host *ihost) +static void sci_controller_initialize_power_control(struct isci_host *ihost) { sci_init_timer(&ihost->power_control.timer, power_control_timeout); @@ -2122,7 +2054,7 @@ static void scic_sds_controller_initialize_power_control(struct isci_host *ihost ihost->power_control.phys_granted_power = 0; } -static enum sci_status scic_controller_initialize(struct isci_host *ihost) +static enum sci_status sci_controller_initialize(struct isci_host *ihost) { struct sci_base_state_machine *sm = &ihost->sm; enum sci_status result = SCI_FAILURE; @@ -2142,14 +2074,14 @@ static enum sci_status scic_controller_initialize(struct isci_host *ihost) ihost->next_phy_to_start = 0; ihost->phy_startup_timer_pending = false; - scic_sds_controller_initialize_power_control(ihost); + sci_controller_initialize_power_control(ihost); /* * There is nothing to do here for B0 since we do not have to * program the AFE registers. * / @todo The AFE settings are supposed to be correct for the B0 but * / presently they seem to be wrong. */ - scic_sds_controller_afe_initialization(ihost); + sci_controller_afe_initialization(ihost); /* Take the hardware out of reset */ @@ -2206,24 +2138,22 @@ static enum sci_status scic_controller_initialize(struct isci_host *ihost) * are accessed during the port initialization. */ for (i = 0; i < SCI_MAX_PHYS; i++) { - result = scic_sds_phy_initialize(&ihost->phys[i], - &ihost->scu_registers->peg0.pe[i].tl, - &ihost->scu_registers->peg0.pe[i].ll); + result = sci_phy_initialize(&ihost->phys[i], + &ihost->scu_registers->peg0.pe[i].tl, + &ihost->scu_registers->peg0.pe[i].ll); if (result != SCI_SUCCESS) goto out; } for (i = 0; i < ihost->logical_port_entries; i++) { - result = scic_sds_port_initialize(&ihost->ports[i], - &ihost->scu_registers->peg0.ptsg.port[i], - &ihost->scu_registers->peg0.ptsg.protocol_engine, - &ihost->scu_registers->peg0.viit[i]); + struct isci_port *iport = &ihost->ports[i]; - if (result != SCI_SUCCESS) - goto out; + iport->port_task_scheduler_registers = &ihost->scu_registers->peg0.ptsg.port[i]; + iport->port_pe_configuration_register = &ihost->scu_registers->peg0.ptsg.protocol_engine[0]; + iport->viit_registers = &ihost->scu_registers->peg0.viit[i]; } - result = scic_sds_port_configuration_agent_initialize(ihost, &ihost->port_agent); + result = sci_port_configuration_agent_initialize(ihost, &ihost->port_agent); out: /* Advance the controller state machine */ @@ -2236,9 +2166,8 @@ static enum sci_status scic_controller_initialize(struct isci_host *ihost) return result; } -static enum sci_status scic_user_parameters_set( - struct isci_host *ihost, - union scic_user_parameters *scic_parms) +static enum sci_status sci_user_parameters_set(struct isci_host *ihost, + struct sci_user_parameters *sci_parms) { u32 state = ihost->sm.current_state_id; @@ -2254,7 +2183,7 @@ static enum sci_status scic_user_parameters_set( for (index = 0; index < SCI_MAX_PHYS; index++) { struct sci_phy_user_params *user_phy; - user_phy = &scic_parms->sds1.phys[index]; + user_phy = &sci_parms->phys[index]; if (!((user_phy->max_speed_generation <= SCIC_SDS_PARM_MAX_SPEED) && @@ -2275,14 +2204,14 @@ static enum sci_status scic_user_parameters_set( return SCI_FAILURE_INVALID_PARAMETER_VALUE; } - if ((scic_parms->sds1.stp_inactivity_timeout == 0) || - (scic_parms->sds1.ssp_inactivity_timeout == 0) || - (scic_parms->sds1.stp_max_occupancy_timeout == 0) || - (scic_parms->sds1.ssp_max_occupancy_timeout == 0) || - (scic_parms->sds1.no_outbound_task_timeout == 0)) + if ((sci_parms->stp_inactivity_timeout == 0) || + (sci_parms->ssp_inactivity_timeout == 0) || + (sci_parms->stp_max_occupancy_timeout == 0) || + (sci_parms->ssp_max_occupancy_timeout == 0) || + (sci_parms->no_outbound_task_timeout == 0)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; - memcpy(&ihost->user_parameters, scic_parms, sizeof(*scic_parms)); + memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms)); return SCI_SUCCESS; } @@ -2290,7 +2219,7 @@ static enum sci_status scic_user_parameters_set( return SCI_FAILURE_INVALID_STATE; } -static int scic_controller_mem_init(struct isci_host *ihost) +static int sci_controller_mem_init(struct isci_host *ihost) { struct device *dev = &ihost->pdev->dev; dma_addr_t dma; @@ -2307,7 +2236,7 @@ static int scic_controller_mem_init(struct isci_host *ihost) size = ihost->remote_node_entries * sizeof(union scu_remote_node_context); ihost->remote_node_context_table = dmam_alloc_coherent(dev, size, &dma, - GFP_KERNEL); + GFP_KERNEL); if (!ihost->remote_node_context_table) return -ENOMEM; @@ -2323,7 +2252,7 @@ static int scic_controller_mem_init(struct isci_host *ihost) writel(lower_32_bits(dma), &ihost->smu_registers->host_task_table_lower); writel(upper_32_bits(dma), &ihost->smu_registers->host_task_table_upper); - err = scic_sds_unsolicited_frame_control_construct(ihost); + err = sci_unsolicited_frame_control_construct(ihost); if (err) return err; @@ -2348,8 +2277,7 @@ int isci_host_init(struct isci_host *ihost) { int err = 0, i; enum sci_status status; - union scic_oem_parameters oem; - union scic_user_parameters scic_user_params; + struct sci_user_parameters sci_user_params; struct isci_pci_info *pci_info = to_pci_info(ihost->pdev); spin_lock_init(&ihost->state_lock); @@ -2358,12 +2286,12 @@ int isci_host_init(struct isci_host *ihost) isci_host_change_state(ihost, isci_starting); - status = scic_controller_construct(ihost, scu_base(ihost), - smu_base(ihost)); + status = sci_controller_construct(ihost, scu_base(ihost), + smu_base(ihost)); if (status != SCI_SUCCESS) { dev_err(&ihost->pdev->dev, - "%s: scic_controller_construct failed - status = %x\n", + "%s: sci_controller_construct failed - status = %x\n", __func__, status); return -ENODEV; @@ -2376,21 +2304,18 @@ int isci_host_init(struct isci_host *ihost) * grab initial values stored in the controller object for OEM and USER * parameters */ - isci_user_parameters_get(ihost, &scic_user_params); - status = scic_user_parameters_set(ihost, - &scic_user_params); + isci_user_parameters_get(&sci_user_params); + status = sci_user_parameters_set(ihost, &sci_user_params); if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, - "%s: scic_user_parameters_set failed\n", + "%s: sci_user_parameters_set failed\n", __func__); return -ENODEV; } - scic_oem_parameters_get(ihost, &oem); - /* grab any OEM parameters specified in orom */ if (pci_info->orom) { - status = isci_parse_oem_parameters(&oem, + status = isci_parse_oem_parameters(&ihost->oem_parameters, pci_info->orom, ihost->id); if (status != SCI_SUCCESS) { @@ -2400,10 +2325,10 @@ int isci_host_init(struct isci_host *ihost) } } - status = scic_oem_parameters_set(ihost, &oem); + status = sci_oem_parameters_set(ihost); if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, - "%s: scic_oem_parameters_set failed\n", + "%s: sci_oem_parameters_set failed\n", __func__); return -ENODEV; } @@ -2415,17 +2340,17 @@ int isci_host_init(struct isci_host *ihost) INIT_LIST_HEAD(&ihost->requests_to_errorback); spin_lock_irq(&ihost->scic_lock); - status = scic_controller_initialize(ihost); + status = sci_controller_initialize(ihost); spin_unlock_irq(&ihost->scic_lock); if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, - "%s: scic_controller_initialize failed -" + "%s: sci_controller_initialize failed -" " status = 0x%x\n", __func__, status); return -ENODEV; } - err = scic_controller_mem_init(ihost); + err = sci_controller_mem_init(ihost); if (err) return err; @@ -2463,20 +2388,20 @@ int isci_host_init(struct isci_host *ihost) return 0; } -void scic_sds_controller_link_up(struct isci_host *ihost, - struct isci_port *iport, struct isci_phy *iphy) +void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) { switch (ihost->sm.current_state_id) { case SCIC_STARTING: sci_del_timer(&ihost->phy_timer); ihost->phy_startup_timer_pending = false; ihost->port_agent.link_up_handler(ihost, &ihost->port_agent, - iport, iphy); - scic_sds_controller_start_next_phy(ihost); + iport, iphy); + sci_controller_start_next_phy(ihost); break; case SCIC_READY: ihost->port_agent.link_up_handler(ihost, &ihost->port_agent, - iport, iphy); + iport, iphy); break; default: dev_dbg(&ihost->pdev->dev, @@ -2486,8 +2411,8 @@ void scic_sds_controller_link_up(struct isci_host *ihost, } } -void scic_sds_controller_link_down(struct isci_host *ihost, - struct isci_port *iport, struct isci_phy *iphy) +void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) { switch (ihost->sm.current_state_id) { case SCIC_STARTING: @@ -2505,12 +2430,7 @@ void scic_sds_controller_link_down(struct isci_host *ihost, } } -/** - * This is a helper method to determine if any remote devices on this - * controller are still in the stopping state. - * - */ -static bool scic_sds_controller_has_remote_devices_stopping(struct isci_host *ihost) +static bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost) { u32 index; @@ -2523,12 +2443,8 @@ static bool scic_sds_controller_has_remote_devices_stopping(struct isci_host *ih return false; } -/** - * This method is called by the remote device to inform the controller - * object that the remote device has stopped. - */ -void scic_sds_controller_remote_device_stopped(struct isci_host *ihost, - struct isci_remote_device *idev) +void sci_controller_remote_device_stopped(struct isci_host *ihost, + struct isci_remote_device *idev) { if (ihost->sm.current_state_id != SCIC_STOPPING) { dev_dbg(&ihost->pdev->dev, @@ -2539,32 +2455,19 @@ void scic_sds_controller_remote_device_stopped(struct isci_host *ihost, return; } - if (!scic_sds_controller_has_remote_devices_stopping(ihost)) { + if (!sci_controller_has_remote_devices_stopping(ihost)) sci_change_state(&ihost->sm, SCIC_STOPPED); - } } -/** - * This method will write to the SCU PCP register the request value. The method - * is used to suspend/resume ports, devices, and phys. - * @scic: - * - * - */ -void scic_sds_controller_post_request( - struct isci_host *ihost, - u32 request) +void sci_controller_post_request(struct isci_host *ihost, u32 request) { - dev_dbg(&ihost->pdev->dev, - "%s: SCIC Controller 0x%p post request 0x%08x\n", - __func__, - ihost, - request); + dev_dbg(&ihost->pdev->dev, "%s[%d]: %#x\n", + __func__, ihost->id, request); writel(request, &ihost->smu_registers->post_context_port); } -struct isci_request *scic_request_by_tag(struct isci_host *ihost, u16 io_tag) +struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag) { u16 task_index; u16 task_sequence; @@ -2599,15 +2502,14 @@ struct isci_request *scic_request_by_tag(struct isci_host *ihost, u16 io_tag) * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote * node index available. */ -enum sci_status scic_sds_controller_allocate_remote_node_context( - struct isci_host *ihost, - struct isci_remote_device *idev, - u16 *node_id) +enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 *node_id) { u16 node_index; - u32 remote_node_count = scic_sds_remote_device_node_count(idev); + u32 remote_node_count = sci_remote_device_node_count(idev); - node_index = scic_sds_remote_node_table_allocate_remote_node( + node_index = sci_remote_node_table_allocate_remote_node( &ihost->available_remote_nodes, remote_node_count ); @@ -2622,68 +2524,26 @@ enum sci_status scic_sds_controller_allocate_remote_node_context( return SCI_FAILURE_INSUFFICIENT_RESOURCES; } -/** - * This method frees the remote node index back to the available pool. Once - * this is done the remote node context buffer is no longer valid and can - * not be used. - * @scic: - * @sci_dev: - * @node_id: - * - */ -void scic_sds_controller_free_remote_node_context( - struct isci_host *ihost, - struct isci_remote_device *idev, - u16 node_id) +void sci_controller_free_remote_node_context(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 node_id) { - u32 remote_node_count = scic_sds_remote_device_node_count(idev); + u32 remote_node_count = sci_remote_device_node_count(idev); if (ihost->device_table[node_id] == idev) { ihost->device_table[node_id] = NULL; - scic_sds_remote_node_table_release_remote_node_index( + sci_remote_node_table_release_remote_node_index( &ihost->available_remote_nodes, remote_node_count, node_id ); } } -/** - * This method returns the union scu_remote_node_context for the specified remote - * node id. - * @scic: - * @node_id: - * - * union scu_remote_node_context* - */ -union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct isci_host *ihost, - u16 node_id - ) { - if ( - (node_id < ihost->remote_node_entries) - && (ihost->device_table[node_id] != NULL) - ) { - return &ihost->remote_node_context_table[node_id]; - } - - return NULL; -} - -/** - * - * @resposne_buffer: This is the buffer into which the D2H register FIS will be - * constructed. - * @frame_header: This is the frame header returned by the hardware. - * @frame_buffer: This is the frame buffer returned by the hardware. - * - * This method will combind the frame header and frame buffer to create a SATA - * D2H register FIS none - */ -void scic_sds_controller_copy_sata_response( - void *response_buffer, - void *frame_header, - void *frame_buffer) +void sci_controller_copy_sata_response(void *response_buffer, + void *frame_header, + void *frame_buffer) { + /* XXX type safety? */ memcpy(response_buffer, frame_header, sizeof(u32)); memcpy(response_buffer + sizeof(u32), @@ -2691,21 +2551,9 @@ void scic_sds_controller_copy_sata_response( sizeof(struct dev_to_host_fis) - sizeof(u32)); } -/** - * This method releases the frame once this is done the frame is available for - * re-use by the hardware. The data contained in the frame header and frame - * buffer is no longer valid. The UF queue get pointer is only updated if UF - * control indicates this is appropriate. - * @scic: - * @frame_index: - * - */ -void scic_sds_controller_release_frame( - struct isci_host *ihost, - u32 frame_index) +void sci_controller_release_frame(struct isci_host *ihost, u32 frame_index) { - if (scic_sds_unsolicited_frame_control_release_frame( - &ihost->uf_control, frame_index) == true) + if (sci_unsolicited_frame_control_release_frame(&ihost->uf_control, frame_index)) writel(ihost->uf_control.get, &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); } @@ -2763,21 +2611,9 @@ enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) return SCI_FAILURE_INVALID_IO_TAG; } -/** - * scic_controller_start_io() - This method is called by the SCI user to - * send/start an IO request. If the method invocation is successful, then - * the IO request has been queued to the hardware for processing. - * @controller: the handle to the controller object for which to start an IO - * request. - * @remote_device: the handle to the remote device object for which to start an - * IO request. - * @io_request: the handle to the io request object to start. - * @io_tag: This parameter specifies a previously allocated IO tag that the - * user desires to be utilized for this request. - */ -enum sci_status scic_controller_start_io(struct isci_host *ihost, - struct isci_remote_device *idev, - struct isci_request *ireq) +enum sci_status sci_controller_start_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) { enum sci_status status; @@ -2786,36 +2622,23 @@ enum sci_status scic_controller_start_io(struct isci_host *ihost, return SCI_FAILURE_INVALID_STATE; } - status = scic_sds_remote_device_start_io(ihost, idev, ireq); + status = sci_remote_device_start_io(ihost, idev, ireq); if (status != SCI_SUCCESS) return status; set_bit(IREQ_ACTIVE, &ireq->flags); - scic_sds_controller_post_request(ihost, scic_sds_request_get_post_context(ireq)); + sci_controller_post_request(ihost, sci_request_get_post_context(ireq)); return SCI_SUCCESS; } -/** - * scic_controller_terminate_request() - This method is called by the SCI Core - * user to terminate an ongoing (i.e. started) core IO request. This does - * not abort the IO request at the target, but rather removes the IO request - * from the host controller. - * @controller: the handle to the controller object for which to terminate a - * request. - * @remote_device: the handle to the remote device object for which to - * terminate a request. - * @request: the handle to the io or task management request object to - * terminate. - * - * Indicate if the controller successfully began the terminate process for the - * IO request. SCI_SUCCESS if the terminate process was successfully started - * for the request. Determine the failure situations and return values. - */ -enum sci_status scic_controller_terminate_request( - struct isci_host *ihost, - struct isci_remote_device *idev, - struct isci_request *ireq) +enum sci_status sci_controller_terminate_request(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) { + /* terminate an ongoing (i.e. started) core IO request. This does not + * abort the IO request at the target, but rather removes the IO + * request from the host controller. + */ enum sci_status status; if (ihost->sm.current_state_id != SCIC_READY) { @@ -2824,7 +2647,7 @@ enum sci_status scic_controller_terminate_request( return SCI_FAILURE_INVALID_STATE; } - status = scic_sds_io_request_terminate(ireq); + status = sci_io_request_terminate(ireq); if (status != SCI_SUCCESS) return status; @@ -2832,27 +2655,25 @@ enum sci_status scic_controller_terminate_request( * Utilize the original post context command and or in the POST_TC_ABORT * request sub-type. */ - scic_sds_controller_post_request(ihost, - scic_sds_request_get_post_context(ireq) | - SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); + sci_controller_post_request(ihost, + ireq->post_context | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); return SCI_SUCCESS; } /** - * scic_controller_complete_io() - This method will perform core specific + * sci_controller_complete_io() - This method will perform core specific * completion operations for an IO request. After this method is invoked, * the user should consider the IO request as invalid until it is properly * reused (i.e. re-constructed). - * @controller: The handle to the controller object for which to complete the + * @ihost: The handle to the controller object for which to complete the * IO request. - * @remote_device: The handle to the remote device object for which to complete + * @idev: The handle to the remote device object for which to complete * the IO request. - * @io_request: the handle to the io request object to complete. + * @ireq: the handle to the io request object to complete. */ -enum sci_status scic_controller_complete_io( - struct isci_host *ihost, - struct isci_remote_device *idev, - struct isci_request *ireq) +enum sci_status sci_controller_complete_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) { enum sci_status status; u16 index; @@ -2862,7 +2683,7 @@ enum sci_status scic_controller_complete_io( /* XXX: Implement this function */ return SCI_FAILURE; case SCIC_READY: - status = scic_sds_remote_device_complete_io(ihost, idev, ireq); + status = sci_remote_device_complete_io(ihost, idev, ireq); if (status != SCI_SUCCESS) return status; @@ -2876,7 +2697,7 @@ enum sci_status scic_controller_complete_io( } -enum sci_status scic_controller_continue_io(struct isci_request *ireq) +enum sci_status sci_controller_continue_io(struct isci_request *ireq) { struct isci_host *ihost = ireq->owning_controller; @@ -2886,12 +2707,12 @@ enum sci_status scic_controller_continue_io(struct isci_request *ireq) } set_bit(IREQ_ACTIVE, &ireq->flags); - scic_sds_controller_post_request(ihost, scic_sds_request_get_post_context(ireq)); + sci_controller_post_request(ihost, sci_request_get_post_context(ireq)); return SCI_SUCCESS; } /** - * scic_controller_start_task() - This method is called by the SCIC user to + * sci_controller_start_task() - This method is called by the SCIC user to * send/start a framework task management request. * @controller: the handle to the controller object for which to start the task * management request. @@ -2899,10 +2720,9 @@ enum sci_status scic_controller_continue_io(struct isci_request *ireq) * the task management request. * @task_request: the handle to the task request object to start. */ -enum sci_task_status scic_controller_start_task( - struct isci_host *ihost, - struct isci_remote_device *idev, - struct isci_request *ireq) +enum sci_task_status sci_controller_start_task(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) { enum sci_status status; @@ -2914,7 +2734,7 @@ enum sci_task_status scic_controller_start_task( return SCI_TASK_FAILURE_INVALID_STATE; } - status = scic_sds_remote_device_start_task(ihost, idev, ireq); + status = sci_remote_device_start_task(ihost, idev, ireq); switch (status) { case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: set_bit(IREQ_ACTIVE, &ireq->flags); @@ -2928,8 +2748,8 @@ enum sci_task_status scic_controller_start_task( case SCI_SUCCESS: set_bit(IREQ_ACTIVE, &ireq->flags); - scic_sds_controller_post_request(ihost, - scic_sds_request_get_post_context(ireq)); + sci_controller_post_request(ihost, + sci_request_get_post_context(ireq)); break; default: break; diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 013f672..d87f21d 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -69,12 +69,12 @@ struct scu_task_context; /** - * struct scic_power_control - + * struct sci_power_control - * * This structure defines the fields for managing power control for direct * attached disk devices. */ -struct scic_power_control { +struct sci_power_control { /** * This field is set when the power control timer is running and cleared when * it is not. @@ -99,18 +99,18 @@ struct scic_power_control { /** * This field is an array of phys that we are waiting on. The phys are direct - * mapped into requesters via struct scic_sds_phy.phy_index + * mapped into requesters via struct sci_phy.phy_index */ struct isci_phy *requesters[SCI_MAX_PHYS]; }; -struct scic_sds_port_configuration_agent; +struct sci_port_configuration_agent; typedef void (*port_config_fn)(struct isci_host *, - struct scic_sds_port_configuration_agent *, + struct sci_port_configuration_agent *, struct isci_port *, struct isci_phy *); -struct scic_sds_port_configuration_agent { +struct sci_port_configuration_agent { u16 phy_configured_mask; u16 phy_ready_mask; struct { @@ -149,13 +149,13 @@ struct isci_host { /* XXX can we time this externally */ struct sci_timer timer; /* XXX drop reference module params directly */ - union scic_user_parameters user_parameters; + struct sci_user_parameters user_parameters; /* XXX no need to be a union */ - union scic_oem_parameters oem_parameters; - struct scic_sds_port_configuration_agent port_agent; + struct sci_oem_params oem_parameters; + struct sci_port_configuration_agent port_agent; struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; - struct scic_remote_node_table available_remote_nodes; - struct scic_power_control power_control; + struct sci_remote_node_table available_remote_nodes; + struct sci_power_control power_control; u8 io_request_sequence[SCI_MAX_IO_REQUESTS]; struct scu_task_context *task_context_table; dma_addr_t task_context_dma; @@ -165,7 +165,7 @@ struct isci_host { u32 logical_port_entries; u32 remote_node_entries; u32 task_context_entries; - struct scic_sds_unsolicited_frame_control uf_control; + struct sci_unsolicited_frame_control uf_control; /* phy startup */ struct sci_timer phy_timer; @@ -206,10 +206,10 @@ struct isci_host { }; /** - * enum scic_sds_controller_states - This enumeration depicts all the states + * enum sci_controller_states - This enumeration depicts all the states * for the common controller state machine. */ -enum scic_sds_controller_states { +enum sci_controller_states { /** * Simply the initial state for the base controller state machine. */ @@ -360,14 +360,14 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev) } /** - * scic_sds_controller_get_protocol_engine_group() - + * sci_controller_get_protocol_engine_group() - * * This macro returns the protocol engine group for this controller object. * Presently we only support protocol engine group 0 so just return that */ -#define scic_sds_controller_get_protocol_engine_group(controller) 0 +#define sci_controller_get_protocol_engine_group(controller) 0 -/* see scic_controller_io_tag_allocate|free for how seq and tci are built */ +/* see sci_controller_io_tag_allocate|free for how seq and tci are built */ #define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci) /* these are returned by the hardware, so sanitize them */ @@ -375,7 +375,7 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev) #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) /* expander attached sata devices require 3 rnc slots */ -static inline int scic_sds_remote_device_node_count(struct isci_remote_device *idev) +static inline int sci_remote_device_node_count(struct isci_remote_device *idev) { struct domain_device *dev = idev->domain_dev; @@ -386,23 +386,23 @@ static inline int scic_sds_remote_device_node_count(struct isci_remote_device *i } /** - * scic_sds_controller_set_invalid_phy() - + * sci_controller_set_invalid_phy() - * * This macro will set the bit in the invalid phy mask for this controller * object. This is used to control messages reported for invalid link up * notifications. */ -#define scic_sds_controller_set_invalid_phy(controller, phy) \ +#define sci_controller_set_invalid_phy(controller, phy) \ ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index)) /** - * scic_sds_controller_clear_invalid_phy() - + * sci_controller_clear_invalid_phy() - * * This macro will clear the bit in the invalid phy mask for this controller * object. This is used to control messages reported for invalid link up * notifications. */ -#define scic_sds_controller_clear_invalid_phy(controller, phy) \ +#define sci_controller_clear_invalid_phy(controller, phy) \ ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) static inline struct device *sciphy_to_dev(struct isci_phy *iphy) @@ -460,56 +460,53 @@ static inline bool is_c0(void) return isci_si_rev > ISCI_SI_REVB0; } -void scic_sds_controller_post_request(struct isci_host *ihost, +void sci_controller_post_request(struct isci_host *ihost, u32 request); -void scic_sds_controller_release_frame(struct isci_host *ihost, +void sci_controller_release_frame(struct isci_host *ihost, u32 frame_index); -void scic_sds_controller_copy_sata_response(void *response_buffer, +void sci_controller_copy_sata_response(void *response_buffer, void *frame_header, void *frame_buffer); -enum sci_status scic_sds_controller_allocate_remote_node_context(struct isci_host *ihost, +enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost, struct isci_remote_device *idev, u16 *node_id); -void scic_sds_controller_free_remote_node_context( +void sci_controller_free_remote_node_context( struct isci_host *ihost, struct isci_remote_device *idev, u16 node_id); -union scu_remote_node_context *scic_sds_controller_get_remote_node_context_buffer( - struct isci_host *ihost, - u16 node_id); -struct isci_request *scic_request_by_tag(struct isci_host *ihost, +struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag); -void scic_sds_controller_power_control_queue_insert( +void sci_controller_power_control_queue_insert( struct isci_host *ihost, struct isci_phy *iphy); -void scic_sds_controller_power_control_queue_remove( +void sci_controller_power_control_queue_remove( struct isci_host *ihost, struct isci_phy *iphy); -void scic_sds_controller_link_up( +void sci_controller_link_up( struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); -void scic_sds_controller_link_down( +void sci_controller_link_down( struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); -void scic_sds_controller_remote_device_stopped( +void sci_controller_remote_device_stopped( struct isci_host *ihost, struct isci_remote_device *idev); -void scic_sds_controller_copy_task_context( +void sci_controller_copy_task_context( struct isci_host *ihost, struct isci_request *ireq); -void scic_sds_controller_register_setup(struct isci_host *ihost); +void sci_controller_register_setup(struct isci_host *ihost); -enum sci_status scic_controller_continue_io(struct isci_request *ireq); +enum sci_status sci_controller_continue_io(struct isci_request *ireq); int isci_host_scan_finished(struct Scsi_Host *, unsigned long); void isci_host_scan_start(struct Scsi_Host *); u16 isci_alloc_tag(struct isci_host *ihost); @@ -536,33 +533,33 @@ void isci_host_remote_device_start_complete( struct isci_remote_device *, enum sci_status); -void scic_controller_disable_interrupts( +void sci_controller_disable_interrupts( struct isci_host *ihost); -enum sci_status scic_controller_start_io( +enum sci_status sci_controller_start_io( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); -enum sci_task_status scic_controller_start_task( +enum sci_task_status sci_controller_start_task( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); -enum sci_status scic_controller_terminate_request( +enum sci_status sci_controller_terminate_request( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); -enum sci_status scic_controller_complete_io( +enum sci_status sci_controller_complete_io( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); -void scic_sds_port_configuration_agent_construct( - struct scic_sds_port_configuration_agent *port_agent); +void sci_port_configuration_agent_construct( + struct sci_port_configuration_agent *port_agent); -enum sci_status scic_sds_port_configuration_agent_initialize( +enum sci_status sci_port_configuration_agent_initialize( struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent); + struct sci_port_configuration_agent *port_agent); #endif diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 68ca1a4..8d9a8bf 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -484,7 +484,7 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic orom = isci_request_oprom(pdev); for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) { - if (scic_oem_parameters_validate(&orom->ctrl[i])) { + if (sci_oem_parameters_validate(&orom->ctrl[i])) { dev_warn(&pdev->dev, "[%d]: invalid oem parameters detected, falling back to firmware\n", i); devm_kfree(&pdev->dev, orom); @@ -554,7 +554,7 @@ static void __devexit isci_pci_remove(struct pci_dev *pdev) for_each_isci_host(i, ihost, pdev) { isci_unregister(ihost); isci_host_deinit(ihost); - scic_controller_disable_interrupts(ihost); + sci_controller_disable_interrupts(ihost); } } diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 2073283..3afccfc 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -304,7 +304,7 @@ enum sci_status { * This member indicates that the operation failed, the failure is * controller implementation specific, and the response data associated * with the request is not valid. You can query for the controller - * specific error information via scic_controller_get_request_status() + * specific error information via sci_controller_get_request_status() */ SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, @@ -395,7 +395,7 @@ enum sci_status { /** * This value indicates that an unsupported PCI device ID has been * specified. This indicates that attempts to invoke - * scic_library_allocate_controller() will fail. + * sci_library_allocate_controller() will fail. */ SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID @@ -493,7 +493,7 @@ irqreturn_t isci_error_isr(int vec, void *data); /* * Each timer is associated with a cancellation flag that is set when * del_timer() is called and checked in the timer callback function. This - * is needed since del_timer_sync() cannot be called with scic_lock held. + * is needed since del_timer_sync() cannot be called with sci_lock held. * For deinit however, del_timer_sync() is used without holding the lock. */ struct sci_timer { diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index ca96b5a..0df9f71 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -67,25 +67,13 @@ enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy) return iphy->max_negotiated_speed; } -/* - * ***************************************************************************** - * * SCIC SDS PHY Internal Methods - * ***************************************************************************** */ - -/** - * This method will initialize the phy transport layer registers - * @sci_phy: - * @transport_layer_registers - * - * enum sci_status - */ -static enum sci_status scic_sds_phy_transport_layer_initialization( - struct isci_phy *iphy, - struct scu_transport_layer_registers __iomem *transport_layer_registers) +static enum sci_status +sci_phy_transport_layer_initialization(struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *reg) { u32 tl_control; - iphy->transport_layer_registers = transport_layer_registers; + iphy->transport_layer_registers = reg; writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, &iphy->transport_layer_registers->stp_rni); @@ -101,32 +89,23 @@ static enum sci_status scic_sds_phy_transport_layer_initialization( return SCI_SUCCESS; } -/** - * This method will initialize the phy link layer registers - * @sci_phy: - * @link_layer_registers: - * - * enum sci_status - */ static enum sci_status -scic_sds_phy_link_layer_initialization(struct isci_phy *iphy, - struct scu_link_layer_registers __iomem *link_layer_registers) +sci_phy_link_layer_initialization(struct isci_phy *iphy, + struct scu_link_layer_registers __iomem *reg) { - struct isci_host *ihost = - iphy->owning_port->owning_controller; + struct isci_host *ihost = iphy->owning_port->owning_controller; int phy_idx = iphy->phy_index; - struct sci_phy_user_params *phy_user = - &ihost->user_parameters.sds1.phys[phy_idx]; + struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx]; struct sci_phy_oem_params *phy_oem = - &ihost->oem_parameters.sds1.phys[phy_idx]; + &ihost->oem_parameters.phys[phy_idx]; u32 phy_configuration; - struct scic_phy_cap phy_cap; + struct sci_phy_cap phy_cap; u32 parity_check = 0; u32 parity_count = 0; u32 llctl, link_rate; u32 clksm_value = 0; - iphy->link_layer_registers = link_layer_registers; + iphy->link_layer_registers = reg; /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 @@ -169,7 +148,7 @@ scic_sds_phy_link_layer_initialization(struct isci_phy *iphy, phy_cap.gen3_no_ssc = 1; phy_cap.gen2_no_ssc = 1; phy_cap.gen1_no_ssc = 1; - if (ihost->oem_parameters.sds1.controller.do_enable_ssc == true) { + if (ihost->oem_parameters.controller.do_enable_ssc == true) { phy_cap.gen3_ssc = 1; phy_cap.gen2_ssc = 1; phy_cap.gen1_ssc = 1; @@ -216,7 +195,7 @@ scic_sds_phy_link_layer_initialization(struct isci_phy *iphy, &iphy->link_layer_registers->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, - (u8)ihost->user_parameters.sds1.no_outbound_task_timeout); + (u8)ihost->user_parameters.no_outbound_task_timeout); switch(phy_user->max_speed_generation) { case SCIC_SDS_PARM_GEN3_SPEED: @@ -289,7 +268,7 @@ done: struct isci_port *phy_get_non_dummy_port( struct isci_phy *iphy) { - if (scic_sds_port_get_index(iphy->owning_port) == SCIC_SDS_DUMMY_PORT) + if (sci_port_get_index(iphy->owning_port) == SCIC_SDS_DUMMY_PORT) return NULL; return iphy->owning_port; @@ -302,7 +281,7 @@ struct isci_port *phy_get_non_dummy_port( * * */ -void scic_sds_phy_set_port( +void sci_phy_set_port( struct isci_phy *iphy, struct isci_port *iport) { @@ -310,33 +289,23 @@ void scic_sds_phy_set_port( if (iphy->bcn_received_while_port_unassigned) { iphy->bcn_received_while_port_unassigned = false; - scic_sds_port_broadcast_change_received(iphy->owning_port, iphy); + sci_port_broadcast_change_received(iphy->owning_port, iphy); } } -/** - * This method will initialize the constructed phy - * @sci_phy: - * @link_layer_registers: - * - * enum sci_status - */ -enum sci_status scic_sds_phy_initialize( - struct isci_phy *iphy, - struct scu_transport_layer_registers __iomem *transport_layer_registers, - struct scu_link_layer_registers __iomem *link_layer_registers) +enum sci_status sci_phy_initialize(struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *tl, + struct scu_link_layer_registers __iomem *ll) { /* Perfrom the initialization of the TL hardware */ - scic_sds_phy_transport_layer_initialization( - iphy, - transport_layer_registers); + sci_phy_transport_layer_initialization(iphy, tl); /* Perofrm the initialization of the PE hardware */ - scic_sds_phy_link_layer_initialization(iphy, link_layer_registers); + sci_phy_link_layer_initialization(iphy, ll); - /* - * There is nothing that needs to be done in this state just - * transition to the stopped state. */ + /* There is nothing that needs to be done in this state just + * transition to the stopped state + */ sci_change_state(&iphy->sm, SCI_PHY_STOPPED); return SCI_SUCCESS; @@ -351,9 +320,7 @@ enum sci_status scic_sds_phy_initialize( * This will either be the RNi for the device or an invalid RNi if there * is no current device assigned to the phy. */ -void scic_sds_phy_setup_transport( - struct isci_phy *iphy, - u32 device_id) +void sci_phy_setup_transport(struct isci_phy *iphy, u32 device_id) { u32 tl_control; @@ -368,15 +335,7 @@ void scic_sds_phy_setup_transport( writel(tl_control, &iphy->transport_layer_registers->control); } -/** - * - * @sci_phy: The phy object to be suspended. - * - * This function will perform the register reads/writes to suspend the SCU - * hardware protocol engine. none - */ -static void scic_sds_phy_suspend( - struct isci_phy *iphy) +static void sci_phy_suspend(struct isci_phy *iphy) { u32 scu_sas_pcfg_value; @@ -386,12 +345,10 @@ static void scic_sds_phy_suspend( writel(scu_sas_pcfg_value, &iphy->link_layer_registers->phy_configuration); - scic_sds_phy_setup_transport( - iphy, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); + sci_phy_setup_transport(iphy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } -void scic_sds_phy_resume(struct isci_phy *iphy) +void sci_phy_resume(struct isci_phy *iphy) { u32 scu_sas_pcfg_value; @@ -402,34 +359,28 @@ void scic_sds_phy_resume(struct isci_phy *iphy) &iphy->link_layer_registers->phy_configuration); } -void scic_sds_phy_get_sas_address(struct isci_phy *iphy, - struct sci_sas_address *sas_address) +void sci_phy_get_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas) { - sas_address->high = readl(&iphy->link_layer_registers->source_sas_address_high); - sas_address->low = readl(&iphy->link_layer_registers->source_sas_address_low); + sas->high = readl(&iphy->link_layer_registers->source_sas_address_high); + sas->low = readl(&iphy->link_layer_registers->source_sas_address_low); } -void scic_sds_phy_get_attached_sas_address(struct isci_phy *iphy, - struct sci_sas_address *sas_address) +void sci_phy_get_attached_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas) { struct sas_identify_frame *iaf; iaf = &iphy->frame_rcvd.iaf; - memcpy(sas_address, iaf->sas_addr, SAS_ADDR_SIZE); + memcpy(sas, iaf->sas_addr, SAS_ADDR_SIZE); } -void scic_sds_phy_get_protocols(struct isci_phy *iphy, - struct scic_phy_proto *protocols) +void sci_phy_get_protocols(struct isci_phy *iphy, struct sci_phy_proto *proto) { - protocols->all = - (u16)(readl(&iphy-> - link_layer_registers->transmit_identification) & - 0x0000FFFF); + proto->all = readl(&iphy->link_layer_registers->transmit_identification); } -enum sci_status scic_sds_phy_start(struct isci_phy *iphy) +enum sci_status sci_phy_start(struct isci_phy *iphy) { - enum scic_sds_phy_states state = iphy->sm.current_state_id; + enum sci_phy_states state = iphy->sm.current_state_id; if (state != SCI_PHY_STOPPED) { dev_dbg(sciphy_to_dev(iphy), @@ -441,9 +392,9 @@ enum sci_status scic_sds_phy_start(struct isci_phy *iphy) return SCI_SUCCESS; } -enum sci_status scic_sds_phy_stop(struct isci_phy *iphy) +enum sci_status sci_phy_stop(struct isci_phy *iphy) { - enum scic_sds_phy_states state = iphy->sm.current_state_id; + enum sci_phy_states state = iphy->sm.current_state_id; switch (state) { case SCI_PHY_SUB_INITIAL: @@ -467,9 +418,9 @@ enum sci_status scic_sds_phy_stop(struct isci_phy *iphy) return SCI_SUCCESS; } -enum sci_status scic_sds_phy_reset(struct isci_phy *iphy) +enum sci_status sci_phy_reset(struct isci_phy *iphy) { - enum scic_sds_phy_states state = iphy->sm.current_state_id; + enum sci_phy_states state = iphy->sm.current_state_id; if (state != SCI_PHY_READY) { dev_dbg(sciphy_to_dev(iphy), @@ -481,9 +432,9 @@ enum sci_status scic_sds_phy_reset(struct isci_phy *iphy) return SCI_SUCCESS; } -enum sci_status scic_sds_phy_consume_power_handler(struct isci_phy *iphy) +enum sci_status sci_phy_consume_power_handler(struct isci_phy *iphy) { - enum scic_sds_phy_states state = iphy->sm.current_state_id; + enum sci_phy_states state = iphy->sm.current_state_id; switch (state) { case SCI_PHY_SUB_AWAIT_SAS_POWER: { @@ -528,55 +479,37 @@ enum sci_status scic_sds_phy_consume_power_handler(struct isci_phy *iphy) } } -/* - * ***************************************************************************** - * * SCIC SDS PHY HELPER FUNCTIONS - * ***************************************************************************** */ - - -/** - * - * @sci_phy: The phy object that received SAS PHY DETECTED. - * - * This method continues the link training for the phy as if it were a SAS PHY - * instead of a SATA PHY. This is done because the completion queue had a SAS - * PHY DETECTED event when the state machine was expecting a SATA PHY event. - * none - */ -static void scic_sds_phy_start_sas_link_training( - struct isci_phy *iphy) +static void sci_phy_start_sas_link_training(struct isci_phy *iphy) { + /* continue the link training for the phy as if it were a SAS PHY + * instead of a SATA PHY. This is done because the completion queue had a SAS + * PHY DETECTED event when the state machine was expecting a SATA PHY event. + */ u32 phy_control; - phy_control = - readl(&iphy->link_layer_registers->phy_configuration); + phy_control = readl(&iphy->link_layer_registers->phy_configuration); phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); writel(phy_control, - &iphy->link_layer_registers->phy_configuration); + &iphy->link_layer_registers->phy_configuration); sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN); iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; } -/** - * - * @sci_phy: The phy object that received a SATA SPINUP HOLD event - * - * This method continues the link training for the phy as if it were a SATA PHY - * instead of a SAS PHY. This is done because the completion queue had a SATA - * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none - */ -static void scic_sds_phy_start_sata_link_training( - struct isci_phy *iphy) +static void sci_phy_start_sata_link_training(struct isci_phy *iphy) { + /* This method continues the link training for the phy as if it were a SATA PHY + * instead of a SAS PHY. This is done because the completion queue had a SATA + * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none + */ sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER); iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; } /** - * scic_sds_phy_complete_link_training - perform processing common to + * sci_phy_complete_link_training - perform processing common to * all protocols upon completion of link training. * @sci_phy: This parameter specifies the phy object for which link training * has completed. @@ -586,30 +519,28 @@ static void scic_sds_phy_start_sata_link_training( * sub-state machine. * */ -static void scic_sds_phy_complete_link_training( - struct isci_phy *iphy, - enum sas_linkrate max_link_rate, - u32 next_state) +static void sci_phy_complete_link_training(struct isci_phy *iphy, + enum sas_linkrate max_link_rate, + u32 next_state) { iphy->max_negotiated_speed = max_link_rate; sci_change_state(&iphy->sm, next_state); } -enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, - u32 event_code) +enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) { - enum scic_sds_phy_states state = iphy->sm.current_state_id; + enum sci_phy_states state = iphy->sm.current_state_id; switch (state) { case SCI_PHY_SUB_AWAIT_OSSP_EN: switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: - scic_sds_phy_start_sas_link_training(iphy); + sci_phy_start_sas_link_training(iphy); iphy->is_in_link_training = true; break; case SCU_EVENT_SATA_SPINUP_HOLD: - scic_sds_phy_start_sata_link_training(iphy); + sci_phy_start_sata_link_training(iphy); iphy->is_in_link_training = true; break; default: @@ -630,30 +561,24 @@ enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, break; case SCU_EVENT_SAS_15: case SCU_EVENT_SAS_15_SSC: - scic_sds_phy_complete_link_training( - iphy, - SAS_LINK_RATE_1_5_GBPS, - SCI_PHY_SUB_AWAIT_IAF_UF); + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_30: case SCU_EVENT_SAS_30_SSC: - scic_sds_phy_complete_link_training( - iphy, - SAS_LINK_RATE_3_0_GBPS, - SCI_PHY_SUB_AWAIT_IAF_UF); + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); break; case SCU_EVENT_SAS_60: case SCU_EVENT_SAS_60_SSC: - scic_sds_phy_complete_link_training( - iphy, - SAS_LINK_RATE_6_0_GBPS, - SCI_PHY_SUB_AWAIT_IAF_UF); + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* * We were doing SAS PHY link training and received a SATA PHY event * continue OOB/SN as if this were a SATA PHY */ - scic_sds_phy_start_sata_link_training(iphy); + sci_phy_start_sata_link_training(iphy); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ @@ -673,14 +598,14 @@ enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, switch (scu_get_event_code(event_code)) { case SCU_EVENT_SAS_PHY_DETECTED: /* Backup the state machine */ - scic_sds_phy_start_sas_link_training(iphy); + sci_phy_start_sas_link_training(iphy); break; case SCU_EVENT_SATA_SPINUP_HOLD: /* We were doing SAS PHY link training and received a * SATA PHY event continue OOB/SN as if this were a * SATA PHY */ - scic_sds_phy_start_sata_link_training(iphy); + sci_phy_start_sata_link_training(iphy); break; case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: case SCU_EVENT_LINK_FAILURE: @@ -727,7 +652,7 @@ enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, /* There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(iphy); + sci_phy_start_sas_link_training(iphy); break; default: @@ -760,7 +685,7 @@ enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, /* There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(iphy); + sci_phy_start_sas_link_training(iphy); break; default: dev_warn(sciphy_to_dev(iphy), @@ -781,24 +706,18 @@ enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, break; case SCU_EVENT_SATA_15: case SCU_EVENT_SATA_15_SSC: - scic_sds_phy_complete_link_training( - iphy, - SAS_LINK_RATE_1_5_GBPS, - SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_30: case SCU_EVENT_SATA_30_SSC: - scic_sds_phy_complete_link_training( - iphy, - SAS_LINK_RATE_3_0_GBPS, - SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_SATA_60: case SCU_EVENT_SATA_60_SSC: - scic_sds_phy_complete_link_training( - iphy, - SAS_LINK_RATE_6_0_GBPS, - SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); break; case SCU_EVENT_LINK_FAILURE: /* Link failure change state back to the starting state */ @@ -808,7 +727,7 @@ enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, /* * There has been a change in the phy type before OOB/SN for the * SATA finished start down the SAS link traning path. */ - scic_sds_phy_start_sas_link_training(iphy); + sci_phy_start_sas_link_training(iphy); break; default: dev_warn(sciphy_to_dev(iphy), @@ -851,7 +770,7 @@ enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, case SCU_EVENT_BROADCAST_CHANGE: /* Broadcast change received. Notify the port. */ if (phy_get_non_dummy_port(iphy) != NULL) - scic_sds_port_broadcast_change_received(iphy->owning_port, iphy); + sci_port_broadcast_change_received(iphy->owning_port, iphy); else iphy->bcn_received_while_port_unassigned = true; break; @@ -886,10 +805,9 @@ enum sci_status scic_sds_phy_event_handler(struct isci_phy *iphy, } } -enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, - u32 frame_index) +enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index) { - enum scic_sds_phy_states state = iphy->sm.current_state_id; + enum sci_phy_states state = iphy->sm.current_state_id; struct isci_host *ihost = iphy->owning_port->owning_controller; enum sci_status result; unsigned long flags; @@ -899,9 +817,9 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, u32 *frame_words; struct sas_identify_frame iaf; - result = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, - frame_index, - (void **)&frame_words); + result = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_words); if (result != SCI_SUCCESS) return result; @@ -933,15 +851,15 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, "unexpected frame id %x\n", __func__, frame_index); - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return result; } case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: { struct dev_to_host_fis *frame_header; u32 *fis_frame_data; - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_phy_get_controller(iphy)->uf_control), + result = sci_unsolicited_frame_control_get_header( + &(sci_phy_get_controller(iphy)->uf_control), frame_index, (void **)&frame_header); @@ -950,14 +868,14 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, if ((frame_header->fis_type == FIS_REGD2H) && !(frame_header->status & ATA_BUSY)) { - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, - frame_index, - (void **)&fis_frame_data); + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&fis_frame_data); spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); - scic_sds_controller_copy_sata_response(&iphy->frame_rcvd.fis, - frame_header, - fis_frame_data); + sci_controller_copy_sata_response(&iphy->frame_rcvd.fis, + frame_header, + fis_frame_data); spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); /* got IAF we can now go to the await spinup semaphore state */ @@ -971,7 +889,7 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, __func__, frame_index); /* Regardless of the result we are done with this frame with it */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return result; } @@ -983,7 +901,7 @@ enum sci_status scic_sds_phy_frame_handler(struct isci_phy *iphy, } -static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm) +static void sci_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); @@ -991,71 +909,71 @@ static void scic_sds_phy_starting_initial_substate_enter(struct sci_base_state_m sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN); } -static void scic_sds_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); struct isci_host *ihost = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_insert(ihost, iphy); + sci_controller_power_control_queue_insert(ihost, iphy); } -static void scic_sds_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); struct isci_host *ihost = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_remove(ihost, iphy); + sci_controller_power_control_queue_remove(ihost, iphy); } -static void scic_sds_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); struct isci_host *ihost = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_insert(ihost, iphy); + sci_controller_power_control_queue_insert(ihost, iphy); } -static void scic_sds_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); struct isci_host *ihost = iphy->owning_port->owning_controller; - scic_sds_controller_power_control_queue_remove(ihost, iphy); + sci_controller_power_control_queue_remove(ihost, iphy); } -static void scic_sds_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } -static void scic_sds_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); sci_del_timer(&iphy->sata_timer); } -static void scic_sds_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); } -static void scic_sds_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); sci_del_timer(&iphy->sata_timer); } -static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - if (scic_sds_port_link_detected(iphy->owning_port, iphy)) { + if (sci_port_link_detected(iphy->owning_port, iphy)) { /* * Clear the PE suspend condition so we can actually @@ -1063,7 +981,7 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_bas * The hardware will not respond to the XRDY until the PE * suspend condition is cleared. */ - scic_sds_phy_resume(iphy); + sci_phy_resume(iphy); sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SIGNATURE_FIS_TIMEOUT); @@ -1071,14 +989,14 @@ static void scic_sds_phy_starting_await_sig_fis_uf_substate_enter(struct sci_bas iphy->is_in_link_training = false; } -static void scic_sds_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm) +static void sci_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); sci_del_timer(&iphy->sata_timer); } -static void scic_sds_phy_starting_final_substate_enter(struct sci_base_state_machine *sm) +static void sci_phy_starting_final_substate_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); @@ -1169,7 +1087,7 @@ static void scu_link_layer_tx_hard_reset( &iphy->link_layer_registers->phy_configuration); } -static void scic_sds_phy_stopped_state_enter(struct sci_base_state_machine *sm) +static void sci_phy_stopped_state_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); @@ -1182,12 +1100,12 @@ static void scic_sds_phy_stopped_state_enter(struct sci_base_state_machine *sm) scu_link_layer_stop_protocol_engine(iphy); if (iphy->sm.previous_state_id != SCI_PHY_INITIAL) - scic_sds_controller_link_down(scic_sds_phy_get_controller(iphy), + sci_controller_link_down(sci_phy_get_controller(iphy), phy_get_non_dummy_port(iphy), iphy); } -static void scic_sds_phy_starting_state_enter(struct sci_base_state_machine *sm) +static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); @@ -1199,31 +1117,31 @@ static void scic_sds_phy_starting_state_enter(struct sci_base_state_machine *sm) iphy->bcn_received_while_port_unassigned = false; if (iphy->sm.previous_state_id == SCI_PHY_READY) - scic_sds_controller_link_down(scic_sds_phy_get_controller(iphy), + sci_controller_link_down(sci_phy_get_controller(iphy), phy_get_non_dummy_port(iphy), iphy); sci_change_state(&iphy->sm, SCI_PHY_SUB_INITIAL); } -static void scic_sds_phy_ready_state_enter(struct sci_base_state_machine *sm) +static void sci_phy_ready_state_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - scic_sds_controller_link_up(scic_sds_phy_get_controller(iphy), + sci_controller_link_up(sci_phy_get_controller(iphy), phy_get_non_dummy_port(iphy), iphy); } -static void scic_sds_phy_ready_state_exit(struct sci_base_state_machine *sm) +static void sci_phy_ready_state_exit(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); - scic_sds_phy_suspend(iphy); + sci_phy_suspend(iphy); } -static void scic_sds_phy_resetting_state_enter(struct sci_base_state_machine *sm) +static void sci_phy_resetting_state_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); @@ -1231,7 +1149,7 @@ static void scic_sds_phy_resetting_state_enter(struct sci_base_state_machine *sm * the resetting state we don't notify the user regarding link up and * link down notifications */ - scic_sds_port_deactivate_phy(iphy->owning_port, iphy, false); + sci_port_deactivate_phy(iphy->owning_port, iphy, false); if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { scu_link_layer_tx_hard_reset(iphy); @@ -1243,57 +1161,57 @@ static void scic_sds_phy_resetting_state_enter(struct sci_base_state_machine *sm } } -static const struct sci_base_state scic_sds_phy_state_table[] = { +static const struct sci_base_state sci_phy_state_table[] = { [SCI_PHY_INITIAL] = { }, [SCI_PHY_STOPPED] = { - .enter_state = scic_sds_phy_stopped_state_enter, + .enter_state = sci_phy_stopped_state_enter, }, [SCI_PHY_STARTING] = { - .enter_state = scic_sds_phy_starting_state_enter, + .enter_state = sci_phy_starting_state_enter, }, [SCI_PHY_SUB_INITIAL] = { - .enter_state = scic_sds_phy_starting_initial_substate_enter, + .enter_state = sci_phy_starting_initial_substate_enter, }, [SCI_PHY_SUB_AWAIT_OSSP_EN] = { }, [SCI_PHY_SUB_AWAIT_SAS_SPEED_EN] = { }, [SCI_PHY_SUB_AWAIT_IAF_UF] = { }, [SCI_PHY_SUB_AWAIT_SAS_POWER] = { - .enter_state = scic_sds_phy_starting_await_sas_power_substate_enter, - .exit_state = scic_sds_phy_starting_await_sas_power_substate_exit, + .enter_state = sci_phy_starting_await_sas_power_substate_enter, + .exit_state = sci_phy_starting_await_sas_power_substate_exit, }, [SCI_PHY_SUB_AWAIT_SATA_POWER] = { - .enter_state = scic_sds_phy_starting_await_sata_power_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_power_substate_exit + .enter_state = sci_phy_starting_await_sata_power_substate_enter, + .exit_state = sci_phy_starting_await_sata_power_substate_exit }, [SCI_PHY_SUB_AWAIT_SATA_PHY_EN] = { - .enter_state = scic_sds_phy_starting_await_sata_phy_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_phy_substate_exit + .enter_state = sci_phy_starting_await_sata_phy_substate_enter, + .exit_state = sci_phy_starting_await_sata_phy_substate_exit }, [SCI_PHY_SUB_AWAIT_SATA_SPEED_EN] = { - .enter_state = scic_sds_phy_starting_await_sata_speed_substate_enter, - .exit_state = scic_sds_phy_starting_await_sata_speed_substate_exit + .enter_state = sci_phy_starting_await_sata_speed_substate_enter, + .exit_state = sci_phy_starting_await_sata_speed_substate_exit }, [SCI_PHY_SUB_AWAIT_SIG_FIS_UF] = { - .enter_state = scic_sds_phy_starting_await_sig_fis_uf_substate_enter, - .exit_state = scic_sds_phy_starting_await_sig_fis_uf_substate_exit + .enter_state = sci_phy_starting_await_sig_fis_uf_substate_enter, + .exit_state = sci_phy_starting_await_sig_fis_uf_substate_exit }, [SCI_PHY_SUB_FINAL] = { - .enter_state = scic_sds_phy_starting_final_substate_enter, + .enter_state = sci_phy_starting_final_substate_enter, }, [SCI_PHY_READY] = { - .enter_state = scic_sds_phy_ready_state_enter, - .exit_state = scic_sds_phy_ready_state_exit, + .enter_state = sci_phy_ready_state_enter, + .exit_state = sci_phy_ready_state_exit, }, [SCI_PHY_RESETTING] = { - .enter_state = scic_sds_phy_resetting_state_enter, + .enter_state = sci_phy_resetting_state_enter, }, [SCI_PHY_FINAL] = { }, }; -void scic_sds_phy_construct(struct isci_phy *iphy, +void sci_phy_construct(struct isci_phy *iphy, struct isci_port *iport, u8 phy_index) { - sci_init_sm(&iphy->sm, scic_sds_phy_state_table, SCI_PHY_INITIAL); + sci_init_sm(&iphy->sm, sci_phy_state_table, SCI_PHY_INITIAL); /* Copy the rest of the input data to our locals */ iphy->owning_port = iport; @@ -1309,14 +1227,13 @@ void scic_sds_phy_construct(struct isci_phy *iphy, void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) { - union scic_oem_parameters oem; + struct sci_oem_params *oem = &ihost->oem_parameters; u64 sci_sas_addr; __be64 sas_addr; - scic_oem_parameters_get(ihost, &oem); - sci_sas_addr = oem.sds1.phys[index].sas_address.high; + sci_sas_addr = oem->phys[index].sas_address.high; sci_sas_addr <<= 32; - sci_sas_addr |= oem.sds1.phys[index].sas_address.low; + sci_sas_addr |= oem->phys[index].sas_address.low; sas_addr = cpu_to_be64(sci_sas_addr); memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr)); @@ -1365,14 +1282,14 @@ int isci_phy_control(struct asd_sas_phy *sas_phy, switch (func) { case PHY_FUNC_DISABLE: spin_lock_irqsave(&ihost->scic_lock, flags); - scic_sds_phy_stop(iphy); + sci_phy_stop(iphy); spin_unlock_irqrestore(&ihost->scic_lock, flags); break; case PHY_FUNC_LINK_RESET: spin_lock_irqsave(&ihost->scic_lock, flags); - scic_sds_phy_stop(iphy); - scic_sds_phy_start(iphy); + sci_phy_stop(iphy); + sci_phy_start(iphy); spin_unlock_irqrestore(&ihost->scic_lock, flags); break; diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 19aa444..5d2c1b4 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -76,7 +76,7 @@ */ #define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 -enum scic_sds_phy_protocol { +enum sci_phy_protocol { SCIC_SDS_PHY_PROTOCOL_UNKNOWN, SCIC_SDS_PHY_PROTOCOL_SAS, SCIC_SDS_PHY_PROTOCOL_SATA, @@ -95,7 +95,7 @@ struct isci_phy { struct sci_base_state_machine sm; struct isci_port *owning_port; enum sas_linkrate max_negotiated_speed; - enum scic_sds_phy_protocol protocol; + enum sci_phy_protocol protocol; u8 phy_index; bool bcn_received_while_port_unassigned; bool is_in_link_training; @@ -118,7 +118,7 @@ static inline struct isci_phy *to_iphy(struct asd_sas_phy *sas_phy) return iphy; } -struct scic_phy_cap { +struct sci_phy_cap { union { struct { /* @@ -147,7 +147,7 @@ struct scic_phy_cap { } __packed; /* this data structure reflects the link layer transmit identification reg */ -struct scic_phy_proto { +struct sci_phy_proto { union { struct { u16 _r_a:1; @@ -167,12 +167,12 @@ struct scic_phy_proto { /** - * struct scic_phy_properties - This structure defines the properties common to + * struct sci_phy_properties - This structure defines the properties common to * all phys that can be retrieved. * * */ -struct scic_phy_properties { +struct sci_phy_properties { /** * This field specifies the port that currently contains the * supplied phy. This field may be set to NULL @@ -194,12 +194,12 @@ struct scic_phy_properties { }; /** - * struct scic_sas_phy_properties - This structure defines the properties, + * struct sci_sas_phy_properties - This structure defines the properties, * specific to a SAS phy, that can be retrieved. * * */ -struct scic_sas_phy_properties { +struct sci_sas_phy_properties { /** * This field delineates the Identify Address Frame received * from the remote end point. @@ -210,17 +210,17 @@ struct scic_sas_phy_properties { * This field delineates the Phy capabilities structure received * from the remote end point. */ - struct scic_phy_cap rcvd_cap; + struct sci_phy_cap rcvd_cap; }; /** - * struct scic_sata_phy_properties - This structure defines the properties, + * struct sci_sata_phy_properties - This structure defines the properties, * specific to a SATA phy, that can be retrieved. * * */ -struct scic_sata_phy_properties { +struct sci_sata_phy_properties { /** * This field delineates the signature FIS received from the * attached target. @@ -236,12 +236,12 @@ struct scic_sata_phy_properties { }; /** - * enum scic_phy_counter_id - This enumeration depicts the various pieces of + * enum sci_phy_counter_id - This enumeration depicts the various pieces of * optional information that can be retrieved for a specific phy. * * */ -enum scic_phy_counter_id { +enum sci_phy_counter_id { /** * This PHY information field tracks the number of frames received. */ @@ -344,7 +344,7 @@ enum scic_phy_counter_id { SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR }; -enum scic_sds_phy_states { +enum sci_phy_states { /** * Simply the initial state for the base domain state machine. */ @@ -441,77 +441,77 @@ enum scic_sds_phy_states { }; /** - * scic_sds_phy_get_index() - + * sci_phy_get_index() - * * This macro returns the phy index for the specified phy */ -#define scic_sds_phy_get_index(phy) \ +#define sci_phy_get_index(phy) \ ((phy)->phy_index) /** - * scic_sds_phy_get_controller() - This macro returns the controller for this + * sci_phy_get_controller() - This macro returns the controller for this * phy * * */ -#define scic_sds_phy_get_controller(phy) \ - (scic_sds_port_get_controller((phy)->owning_port)) +#define sci_phy_get_controller(phy) \ + (sci_port_get_controller((phy)->owning_port)) -void scic_sds_phy_construct( +void sci_phy_construct( struct isci_phy *iphy, struct isci_port *iport, u8 phy_index); struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy); -void scic_sds_phy_set_port( +void sci_phy_set_port( struct isci_phy *iphy, struct isci_port *iport); -enum sci_status scic_sds_phy_initialize( +enum sci_status sci_phy_initialize( struct isci_phy *iphy, struct scu_transport_layer_registers __iomem *transport_layer_registers, struct scu_link_layer_registers __iomem *link_layer_registers); -enum sci_status scic_sds_phy_start( +enum sci_status sci_phy_start( struct isci_phy *iphy); -enum sci_status scic_sds_phy_stop( +enum sci_status sci_phy_stop( struct isci_phy *iphy); -enum sci_status scic_sds_phy_reset( +enum sci_status sci_phy_reset( struct isci_phy *iphy); -void scic_sds_phy_resume( +void sci_phy_resume( struct isci_phy *iphy); -void scic_sds_phy_setup_transport( +void sci_phy_setup_transport( struct isci_phy *iphy, u32 device_id); -enum sci_status scic_sds_phy_event_handler( +enum sci_status sci_phy_event_handler( struct isci_phy *iphy, u32 event_code); -enum sci_status scic_sds_phy_frame_handler( +enum sci_status sci_phy_frame_handler( struct isci_phy *iphy, u32 frame_index); -enum sci_status scic_sds_phy_consume_power_handler( +enum sci_status sci_phy_consume_power_handler( struct isci_phy *iphy); -void scic_sds_phy_get_sas_address( +void sci_phy_get_sas_address( struct isci_phy *iphy, struct sci_sas_address *sas_address); -void scic_sds_phy_get_attached_sas_address( +void sci_phy_get_attached_sas_address( struct isci_phy *iphy, struct sci_sas_address *sas_address); -struct scic_phy_proto; -void scic_sds_phy_get_protocols( +struct sci_phy_proto; +void sci_phy_get_protocols( struct isci_phy *iphy, - struct scic_phy_proto *protocols); + struct sci_phy_proto *protocols); enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy); struct isci_host; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index c434d5a..1822ed6 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -74,57 +74,35 @@ static void isci_port_change_state(struct isci_port *iport, enum isci_status sta spin_unlock_irqrestore(&iport->state_lock, flags); } -/* - * This function will indicate which protocols are supported by this port. - * @sci_port: a handle corresponding to the SAS port for which to return the - * supported protocols. - * @protocols: This parameter specifies a pointer to a data structure - * which the core will copy the protocol values for the port from the - * transmit_identification register. - */ -static void -scic_sds_port_get_protocols(struct isci_port *iport, - struct scic_phy_proto *protocols) +static void sci_port_get_protocols(struct isci_port *iport, struct sci_phy_proto *proto) { u8 index; - protocols->all = 0; - + proto->all = 0; for (index = 0; index < SCI_MAX_PHYS; index++) { - if (iport->phy_table[index] != NULL) { - scic_sds_phy_get_protocols(iport->phy_table[index], - protocols); - } + struct isci_phy *iphy = iport->phy_table[index]; + + if (!iphy) + continue; + sci_phy_get_protocols(iphy, proto); } } -/** - * This method requests a list (mask) of the phys contained in the supplied SAS - * port. - * @sci_port: a handle corresponding to the SAS port for which to return the - * phy mask. - * - * Return a bit mask indicating which phys are a part of this port. Each bit - * corresponds to a phy identifier (e.g. bit 0 = phy id 0). - */ -static u32 scic_sds_port_get_phys(struct isci_port *iport) +static u32 sci_port_get_phys(struct isci_port *iport) { u32 index; u32 mask; mask = 0; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (iport->phy_table[index] != NULL) { + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index]) mask |= (1 << index); - } - } return mask; } /** - * scic_port_get_properties() - This method simply returns the properties + * sci_port_get_properties() - This method simply returns the properties * regarding the port, such as: physical index, protocols, sas address, etc. * @port: this parameter specifies the port for which to retrieve the physical * index. @@ -136,22 +114,22 @@ static u32 scic_sds_port_get_phys(struct isci_port *iport) * value is returned if the specified port is not valid. When this value is * returned, no data is copied to the properties output parameter. */ -static enum sci_status scic_port_get_properties(struct isci_port *iport, - struct scic_port_properties *prop) +static enum sci_status sci_port_get_properties(struct isci_port *iport, + struct sci_port_properties *prop) { if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT) return SCI_FAILURE_INVALID_PORT; - prop->index = iport->logical_port_index; - prop->phy_mask = scic_sds_port_get_phys(iport); - scic_sds_port_get_sas_address(iport, &prop->local.sas_address); - scic_sds_port_get_protocols(iport, &prop->local.protocols); - scic_sds_port_get_attached_sas_address(iport, &prop->remote.sas_address); + prop->index = iport->logical_port_index; + prop->phy_mask = sci_port_get_phys(iport); + sci_port_get_sas_address(iport, &prop->local.sas_address); + sci_port_get_protocols(iport, &prop->local.protocols); + sci_port_get_attached_sas_address(iport, &prop->remote.sas_address); return SCI_SUCCESS; } -static void scic_port_bcn_enable(struct isci_port *iport) +static void sci_port_bcn_enable(struct isci_port *iport) { struct isci_phy *iphy; u32 val; @@ -167,7 +145,7 @@ static void scic_port_bcn_enable(struct isci_port *iport) } } -/* called under scic_lock to stabilize phy:port associations */ +/* called under sci_lock to stabilize phy:port associations */ void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) { int i; @@ -209,7 +187,7 @@ static void isci_port_bc_change_received(struct isci_host *ihost, ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD); } - scic_port_bcn_enable(iport); + sci_port_bcn_enable(iport); } static void isci_port_link_up(struct isci_host *isci_host, @@ -217,7 +195,7 @@ static void isci_port_link_up(struct isci_host *isci_host, struct isci_phy *iphy) { unsigned long flags; - struct scic_port_properties properties; + struct sci_port_properties properties; unsigned long success = true; BUG_ON(iphy->isci_port != NULL); @@ -232,7 +210,7 @@ static void isci_port_link_up(struct isci_host *isci_host, isci_port_change_state(iphy->isci_port, isci_starting); - scic_port_get_properties(iport, &properties); + sci_port_get_properties(iport, &properties); if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { u64 attached_sas_address; @@ -245,7 +223,7 @@ static void isci_port_link_up(struct isci_host *isci_host, * automagically assign a SAS address to the end device * for the purpose of creating a port. This SAS address * will not be the same as assigned to the PHY and needs - * to be obtained from struct scic_port_properties properties. + * to be obtained from struct sci_port_properties properties. */ attached_sas_address = properties.remote.sas_address.high; attached_sas_address <<= 32; @@ -399,50 +377,40 @@ static void isci_port_hard_reset_complete(struct isci_port *isci_port, * doesn't preclude all configurations. It merely ensures that a phy is part * of the allowable set of phy identifiers for that port. For example, one * could assign phy 3 to port 0 and no other phys. Please refer to - * scic_sds_port_is_phy_mask_valid() for information regarding whether the + * sci_port_is_phy_mask_valid() for information regarding whether the * phy_mask for a port can be supported. bool true if this is a valid phy * assignment for the port false if this is not a valid phy assignment for the * port */ -bool scic_sds_port_is_valid_phy_assignment(struct isci_port *iport, - u32 phy_index) +bool sci_port_is_valid_phy_assignment(struct isci_port *iport, u32 phy_index) { + struct isci_host *ihost = iport->owning_controller; + struct sci_user_parameters *user = &ihost->user_parameters; + /* Initialize to invalid value. */ u32 existing_phy_index = SCI_MAX_PHYS; u32 index; - if ((iport->physical_port_index == 1) && (phy_index != 1)) { + if ((iport->physical_port_index == 1) && (phy_index != 1)) return false; - } - if (iport->physical_port_index == 3 && phy_index != 3) { + if (iport->physical_port_index == 3 && phy_index != 3) return false; - } - if ( - (iport->physical_port_index == 2) - && ((phy_index == 0) || (phy_index == 1)) - ) { + if (iport->physical_port_index == 2 && + (phy_index == 0 || phy_index == 1)) return false; - } - for (index = 0; index < SCI_MAX_PHYS; index++) { - if ((iport->phy_table[index] != NULL) - && (index != phy_index)) { + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index] && index != phy_index) existing_phy_index = index; - } - } - /* - * Ensure that all of the phys in the port are capable of - * operating at the same maximum link rate. */ - if ( - (existing_phy_index < SCI_MAX_PHYS) - && (iport->owning_controller->user_parameters.sds1.phys[ - phy_index].max_speed_generation != - iport->owning_controller->user_parameters.sds1.phys[ - existing_phy_index].max_speed_generation) - ) + /* Ensure that all of the phys in the port are capable of + * operating at the same maximum link rate. + */ + if (existing_phy_index < SCI_MAX_PHYS && + user->phys[phy_index].max_speed_generation != + user->phys[existing_phy_index].max_speed_generation) return false; return true; @@ -460,7 +428,7 @@ bool scic_sds_port_is_valid_phy_assignment(struct isci_port *iport, * phy mask can be supported. true if this is a valid phy assignment for the * port false if this is not a valid phy assignment for the port */ -static bool scic_sds_port_is_phy_mask_valid( +static bool sci_port_is_phy_mask_valid( struct isci_port *iport, u32 phy_mask) { @@ -493,10 +461,10 @@ static bool scic_sds_port_is_phy_mask_valid( * the port. Currently, the lowest order phy that is connected is returned. * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is * returned if there are no currently active (i.e. connected to a remote end - * point) phys contained in the port. All other values specify a struct scic_sds_phy + * point) phys contained in the port. All other values specify a struct sci_phy * object that is active in the port. */ -static struct isci_phy *scic_sds_port_get_a_connected_phy(struct isci_port *iport) +static struct isci_phy *sci_port_get_a_connected_phy(struct isci_port *iport) { u32 index; struct isci_phy *iphy; @@ -506,14 +474,14 @@ static struct isci_phy *scic_sds_port_get_a_connected_phy(struct isci_port *ipor * connected to the remote end-point. */ iphy = iport->phy_table[index]; - if (iphy && scic_sds_port_active_phy(iport, iphy)) + if (iphy && sci_port_active_phy(iport, iphy)) return iphy; } return NULL; } -static enum sci_status scic_sds_port_set_phy(struct isci_port *iport, struct isci_phy *iphy) +static enum sci_status sci_port_set_phy(struct isci_port *iport, struct isci_phy *iphy) { /* Check to see if we can add this phy to a port * that means that the phy is not part of a port and that the port does @@ -521,13 +489,13 @@ static enum sci_status scic_sds_port_set_phy(struct isci_port *iport, struct isc */ if (!iport->phy_table[iphy->phy_index] && !phy_get_non_dummy_port(iphy) && - scic_sds_port_is_valid_phy_assignment(iport, iphy->phy_index)) { + sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) { /* Phy is being added in the stopped state so we are in MPC mode * make logical port index = physical port index */ iport->logical_port_index = iport->physical_port_index; iport->phy_table[iphy->phy_index] = iphy; - scic_sds_phy_set_port(iphy, iport); + sci_phy_set_port(iphy, iport); return SCI_SUCCESS; } @@ -535,8 +503,7 @@ static enum sci_status scic_sds_port_set_phy(struct isci_port *iport, struct isc return SCI_FAILURE; } -static enum sci_status scic_sds_port_clear_phy(struct isci_port *iport, - struct isci_phy *iphy) +static enum sci_status sci_port_clear_phy(struct isci_port *iport, struct isci_phy *iphy) { /* Make sure that this phy is part of this port */ if (iport->phy_table[iphy->phy_index] == iphy && @@ -544,7 +511,7 @@ static enum sci_status scic_sds_port_clear_phy(struct isci_port *iport, struct isci_host *ihost = iport->owning_controller; /* Yep it is assigned to this port so remove it */ - scic_sds_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS]); + sci_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS]); iport->phy_table[iphy->phy_index] = NULL; return SCI_SUCCESS; } @@ -552,45 +519,18 @@ static enum sci_status scic_sds_port_clear_phy(struct isci_port *iport, return SCI_FAILURE; } - -/** - * This method requests the SAS address for the supplied SAS port from the SCI - * implementation. - * @sci_port: a handle corresponding to the SAS port for which to return the - * SAS address. - * @sas_address: This parameter specifies a pointer to a SAS address structure - * into which the core will copy the SAS address for the port. - * - */ -void scic_sds_port_get_sas_address( - struct isci_port *iport, - struct sci_sas_address *sas_address) +void sci_port_get_sas_address(struct isci_port *iport, struct sci_sas_address *sas) { u32 index; - sas_address->high = 0; - sas_address->low = 0; - - for (index = 0; index < SCI_MAX_PHYS; index++) { - if (iport->phy_table[index] != NULL) { - scic_sds_phy_get_sas_address(iport->phy_table[index], sas_address); - } - } + sas->high = 0; + sas->low = 0; + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index]) + sci_phy_get_sas_address(iport->phy_table[index], sas); } -/* - * This function requests the SAS address for the device directly attached to - * this SAS port. - * @sci_port: a handle corresponding to the SAS port for which to return the - * SAS address. - * @sas_address: This parameter specifies a pointer to a SAS address structure - * into which the core will copy the SAS address for the device directly - * attached to the port. - * - */ -void scic_sds_port_get_attached_sas_address( - struct isci_port *iport, - struct sci_sas_address *sas_address) +void sci_port_get_attached_sas_address(struct isci_port *iport, struct sci_sas_address *sas) { struct isci_phy *iphy; @@ -598,23 +538,22 @@ void scic_sds_port_get_attached_sas_address( * Ensure that the phy is both part of the port and currently * connected to the remote end-point. */ - iphy = scic_sds_port_get_a_connected_phy(iport); + iphy = sci_port_get_a_connected_phy(iport); if (iphy) { if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { - scic_sds_phy_get_attached_sas_address(iphy, - sas_address); + sci_phy_get_attached_sas_address(iphy, sas); } else { - scic_sds_phy_get_sas_address(iphy, sas_address); - sas_address->low += iphy->phy_index; + sci_phy_get_sas_address(iphy, sas); + sas->low += iphy->phy_index; } } else { - sas_address->high = 0; - sas_address->low = 0; + sas->high = 0; + sas->low = 0; } } /** - * scic_sds_port_construct_dummy_rnc() - create dummy rnc for si workaround + * sci_port_construct_dummy_rnc() - create dummy rnc for si workaround * * @sci_port: logical port on which we need to create the remote node context * @rni: remote node index for this remote node context. @@ -623,7 +562,7 @@ void scic_sds_port_get_attached_sas_address( * This structure will be posted to the hardware to work around a scheduler * error in the hardware. */ -static void scic_sds_port_construct_dummy_rnc(struct isci_port *iport, u16 rni) +static void sci_port_construct_dummy_rnc(struct isci_port *iport, u16 rni) { union scu_remote_node_context *rnc; @@ -651,7 +590,7 @@ static void scic_sds_port_construct_dummy_rnc(struct isci_port *iport, u16 rni) * structure will be posted to the hardwre to work around a scheduler error * in the hardware. */ -static void scic_sds_port_construct_dummy_task(struct isci_port *iport, u16 tag) +static void sci_port_construct_dummy_task(struct isci_port *iport, u16 tag) { struct isci_host *ihost = iport->owning_controller; struct scu_task_context *task_context; @@ -671,7 +610,7 @@ static void scic_sds_port_construct_dummy_task(struct isci_port *iport, u16 tag) task_context->task_phase = 0x01; } -static void scic_sds_port_destroy_dummy_resources(struct isci_port *iport) +static void sci_port_destroy_dummy_resources(struct isci_port *iport) { struct isci_host *ihost = iport->owning_controller; @@ -679,93 +618,43 @@ static void scic_sds_port_destroy_dummy_resources(struct isci_port *iport) isci_free_tag(ihost, iport->reserved_tag); if (iport->reserved_rni != SCU_DUMMY_INDEX) - scic_sds_remote_node_table_release_remote_node_index(&ihost->available_remote_nodes, + sci_remote_node_table_release_remote_node_index(&ihost->available_remote_nodes, 1, iport->reserved_rni); iport->reserved_rni = SCU_DUMMY_INDEX; iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; } -/** - * This method performs initialization of the supplied port. Initialization - * includes: - state machine initialization - member variable initialization - * - configuring the phy_mask - * @sci_port: - * @transport_layer_registers: - * @port_task_scheduler_registers: - * @port_configuration_regsiter: - * - * enum sci_status SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This value is returned - * if the phy being added to the port - */ -enum sci_status scic_sds_port_initialize( - struct isci_port *iport, - void __iomem *port_task_scheduler_registers, - void __iomem *port_configuration_regsiter, - void __iomem *viit_registers) -{ - iport->port_task_scheduler_registers = port_task_scheduler_registers; - iport->port_pe_configuration_register = port_configuration_regsiter; - iport->viit_registers = viit_registers; - - return SCI_SUCCESS; -} - - -/** - * This method assigns the direct attached device ID for this port. - * - * @param[in] iport The port for which the direct attached device id is to - * be assigned. - * @param[in] device_id The direct attached device ID to assign to the port. - * This will be the RNi for the device - */ -void scic_sds_port_setup_transports( - struct isci_port *iport, - u32 device_id) +void sci_port_setup_transports(struct isci_port *iport, u32 device_id) { u8 index; for (index = 0; index < SCI_MAX_PHYS; index++) { if (iport->active_phy_mask & (1 << index)) - scic_sds_phy_setup_transport(iport->phy_table[index], device_id); + sci_phy_setup_transport(iport->phy_table[index], device_id); } } -/** - * - * @sci_port: This is the port on which the phy should be enabled. - * @sci_phy: This is the specific phy which to enable. - * @do_notify_user: This parameter specifies whether to inform the user (via - * scic_cb_port_link_up()) as to the fact that a new phy as become ready. - * - * This function will activate the phy in the port. - * Activation includes: - adding - * the phy to the port - enabling the Protocol Engine in the silicon. - - * notifying the user that the link is up. none - */ -static void scic_sds_port_activate_phy(struct isci_port *iport, - struct isci_phy *iphy, - bool do_notify_user) +static void sci_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy, + bool do_notify_user) { struct isci_host *ihost = iport->owning_controller; if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) - scic_sds_phy_resume(iphy); + sci_phy_resume(iphy); iport->active_phy_mask |= 1 << iphy->phy_index; - scic_sds_controller_clear_invalid_phy(ihost, iphy); + sci_controller_clear_invalid_phy(ihost, iphy); if (do_notify_user == true) isci_port_link_up(ihost, iport, iphy); } -void scic_sds_port_deactivate_phy(struct isci_port *iport, - struct isci_phy *iphy, - bool do_notify_user) +void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, + bool do_notify_user) { - struct isci_host *ihost = scic_sds_port_get_controller(iport); + struct isci_host *ihost = sci_port_get_controller(iport); iport->active_phy_mask &= ~(1 << iphy->phy_index); @@ -779,16 +668,7 @@ void scic_sds_port_deactivate_phy(struct isci_port *iport, isci_port_link_down(ihost, iphy, iport); } -/** - * - * @sci_port: This is the port on which the phy should be disabled. - * @sci_phy: This is the specific phy which to disabled. - * - * This function will disable the phy and report that the phy is not valid for - * this port object. None - */ -static void scic_sds_port_invalid_link_up(struct isci_port *iport, - struct isci_phy *iphy) +static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *iphy) { struct isci_host *ihost = iport->owning_controller; @@ -798,12 +678,12 @@ static void scic_sds_port_invalid_link_up(struct isci_port *iport, * invalid link. */ if ((ihost->invalid_phy_mask & (1 << iphy->phy_index)) == 0) { - scic_sds_controller_set_invalid_phy(ihost, iphy); + sci_controller_set_invalid_phy(ihost, iphy); dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); } } -static bool is_port_ready_state(enum scic_sds_port_states state) +static bool is_port_ready_state(enum sci_port_states state) { switch (state) { case SCI_PORT_READY: @@ -818,10 +698,10 @@ static bool is_port_ready_state(enum scic_sds_port_states state) /* flag dummy rnc hanling when exiting a ready state */ static void port_state_machine_change(struct isci_port *iport, - enum scic_sds_port_states state) + enum sci_port_states state) { struct sci_base_state_machine *sm = &iport->sm; - enum scic_sds_port_states old_state = sm->current_state_id; + enum sci_port_states old_state = sm->current_state_id; if (is_port_ready_state(old_state) && !is_port_ready_state(state)) iport->ready_exit = true; @@ -831,11 +711,11 @@ static void port_state_machine_change(struct isci_port *iport, } /** - * scic_sds_port_general_link_up_handler - phy can be assigned to port? - * @sci_port: scic_sds_port object for which has a phy that has gone link up. + * sci_port_general_link_up_handler - phy can be assigned to port? + * @sci_port: sci_port object for which has a phy that has gone link up. * @sci_phy: This is the struct isci_phy object that has gone link up. * @do_notify_user: This parameter specifies whether to inform the user (via - * scic_cb_port_link_up()) as to the fact that a new phy as become ready. + * sci_port_link_up()) as to the fact that a new phy as become ready. * * Determine if this phy can be assigned to this * port . If the phy is not a valid PHY for @@ -843,15 +723,15 @@ static void port_state_machine_change(struct isci_port *iport, * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in * the same port. none */ -static void scic_sds_port_general_link_up_handler(struct isci_port *iport, +static void sci_port_general_link_up_handler(struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user) { struct sci_sas_address port_sas_address; struct sci_sas_address phy_sas_address; - scic_sds_port_get_attached_sas_address(iport, &port_sas_address); - scic_sds_phy_get_attached_sas_address(iphy, &phy_sas_address); + sci_port_get_attached_sas_address(iport, &port_sas_address); + sci_phy_get_attached_sas_address(iphy, &phy_sas_address); /* If the SAS address of the new phy matches the SAS address of * other phys in the port OR this is the first phy in the port, @@ -863,11 +743,11 @@ static void scic_sds_port_general_link_up_handler(struct isci_port *iport, iport->active_phy_mask == 0) { struct sci_base_state_machine *sm = &iport->sm; - scic_sds_port_activate_phy(iport, iphy, do_notify_user); + sci_port_activate_phy(iport, iphy, do_notify_user); if (sm->current_state_id == SCI_PORT_RESETTING) port_state_machine_change(iport, SCI_PORT_READY); } else - scic_sds_port_invalid_link_up(iport, iphy); + sci_port_invalid_link_up(iport, iphy); } @@ -881,7 +761,7 @@ static void scic_sds_port_general_link_up_handler(struct isci_port *iport, * bool true Is returned if this is a wide ported port. false Is returned if * this is a narrow port. */ -static bool scic_sds_port_is_wide(struct isci_port *iport) +static bool sci_port_is_wide(struct isci_port *iport) { u32 index; u32 phy_count = 0; @@ -909,14 +789,14 @@ static bool scic_sds_port_is_wide(struct isci_port *iport) * wide ports and direct attached phys. Since there are no wide ported SATA * devices this could become an invalid port configuration. */ -bool scic_sds_port_link_detected( +bool sci_port_link_detected( struct isci_port *iport, struct isci_phy *iphy) { if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) && (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && - scic_sds_port_is_wide(iport)) { - scic_sds_port_invalid_link_up(iport, iphy); + sci_port_is_wide(iport)) { + sci_port_invalid_link_up(iport, iphy); return false; } @@ -977,11 +857,11 @@ done: * * */ -static void scic_sds_port_update_viit_entry(struct isci_port *iport) +static void sci_port_update_viit_entry(struct isci_port *iport) { struct sci_sas_address sas_address; - scic_sds_port_get_sas_address(iport, &sas_address); + sci_port_get_sas_address(iport, &sas_address); writel(sas_address.high, &iport->viit_registers->initiator_sas_address_hi); @@ -999,7 +879,7 @@ static void scic_sds_port_update_viit_entry(struct isci_port *iport) &iport->viit_registers->status); } -enum sas_linkrate scic_sds_port_get_max_allowed_speed(struct isci_port *iport) +enum sas_linkrate sci_port_get_max_allowed_speed(struct isci_port *iport) { u16 index; struct isci_phy *iphy; @@ -1010,7 +890,7 @@ enum sas_linkrate scic_sds_port_get_max_allowed_speed(struct isci_port *iport) * lowest maximum link rate. */ for (index = 0; index < SCI_MAX_PHYS; index++) { iphy = iport->phy_table[index]; - if (iphy && scic_sds_port_active_phy(iport, iphy) && + if (iphy && sci_port_active_phy(iport, iphy) && iphy->max_negotiated_speed < max_allowed_speed) max_allowed_speed = iphy->max_negotiated_speed; } @@ -1018,7 +898,7 @@ enum sas_linkrate scic_sds_port_get_max_allowed_speed(struct isci_port *iport) return max_allowed_speed; } -static void scic_sds_port_suspend_port_task_scheduler(struct isci_port *iport) +static void sci_port_suspend_port_task_scheduler(struct isci_port *iport) { u32 pts_control_value; @@ -1028,7 +908,7 @@ static void scic_sds_port_suspend_port_task_scheduler(struct isci_port *iport) } /** - * scic_sds_port_post_dummy_request() - post dummy/workaround request + * sci_port_post_dummy_request() - post dummy/workaround request * @sci_port: port to post task * * Prevent the hardware scheduler from posting new requests to the front @@ -1036,7 +916,7 @@ static void scic_sds_port_suspend_port_task_scheduler(struct isci_port *iport) * ongoing requests. * */ -static void scic_sds_port_post_dummy_request(struct isci_port *iport) +static void sci_port_post_dummy_request(struct isci_port *iport) { struct isci_host *ihost = iport->owning_controller; u16 tag = iport->reserved_tag; @@ -1050,7 +930,7 @@ static void scic_sds_port_post_dummy_request(struct isci_port *iport) iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | ISCI_TAG_TCI(tag); - scic_sds_controller_post_request(ihost, command); + sci_controller_post_request(ihost, command); } /** @@ -1060,7 +940,7 @@ static void scic_sds_port_post_dummy_request(struct isci_port *iport) * @sci_port: The port on which the task must be aborted. * */ -static void scic_sds_port_abort_dummy_request(struct isci_port *iport) +static void sci_port_abort_dummy_request(struct isci_port *iport) { struct isci_host *ihost = iport->owning_controller; u16 tag = iport->reserved_tag; @@ -1074,7 +954,7 @@ static void scic_sds_port_abort_dummy_request(struct isci_port *iport) iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | ISCI_TAG_TCI(tag); - scic_sds_controller_post_request(ihost, command); + sci_controller_post_request(ihost, command); } /** @@ -1084,7 +964,7 @@ static void scic_sds_port_abort_dummy_request(struct isci_port *iport) * This method will resume the port task scheduler for this port object. none */ static void -scic_sds_port_resume_port_task_scheduler(struct isci_port *iport) +sci_port_resume_port_task_scheduler(struct isci_port *iport) { u32 pts_control_value; @@ -1093,11 +973,11 @@ scic_sds_port_resume_port_task_scheduler(struct isci_port *iport) writel(pts_control_value, &iport->port_task_scheduler_registers->control); } -static void scic_sds_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm) +static void sci_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); - scic_sds_port_suspend_port_task_scheduler(iport); + sci_port_suspend_port_task_scheduler(iport); iport->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; @@ -1108,7 +988,7 @@ static void scic_sds_port_ready_substate_waiting_enter(struct sci_base_state_mac } } -static void scic_sds_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) +static void sci_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) { u32 index; struct isci_port *iport = container_of(sm, typeof(*iport), sm); @@ -1124,18 +1004,18 @@ static void scic_sds_port_ready_substate_operational_enter(struct sci_base_state } } - scic_sds_port_update_viit_entry(iport); + sci_port_update_viit_entry(iport); - scic_sds_port_resume_port_task_scheduler(iport); + sci_port_resume_port_task_scheduler(iport); /* * Post the dummy task for the port so the hardware can schedule * io correctly */ - scic_sds_port_post_dummy_request(iport); + sci_port_post_dummy_request(iport); } -static void scic_sds_port_invalidate_dummy_remote_node(struct isci_port *iport) +static void sci_port_invalidate_dummy_remote_node(struct isci_port *iport) { struct isci_host *ihost = iport->owning_controller; u8 phys_index = iport->physical_port_index; @@ -1157,7 +1037,7 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct isci_port *iport) command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - scic_sds_controller_post_request(ihost, command); + sci_controller_post_request(ihost, command); } /** @@ -1168,7 +1048,7 @@ static void scic_sds_port_invalidate_dummy_remote_node(struct isci_port *iport) * exiting the SCI_PORT_SUB_OPERATIONAL. This function reports * the port not ready and suspends the port task scheduler. none */ -static void scic_sds_port_ready_substate_operational_exit(struct sci_base_state_machine *sm) +static void sci_port_ready_substate_operational_exit(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); struct isci_host *ihost = iport->owning_controller; @@ -1178,15 +1058,15 @@ static void scic_sds_port_ready_substate_operational_exit(struct sci_base_state_ * the hardware will treat this as a NOP and just return abort * complete. */ - scic_sds_port_abort_dummy_request(iport); + sci_port_abort_dummy_request(iport); isci_port_not_ready(ihost, iport); if (iport->ready_exit) - scic_sds_port_invalidate_dummy_remote_node(iport); + sci_port_invalidate_dummy_remote_node(iport); } -static void scic_sds_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm) +static void sci_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); struct isci_host *ihost = iport->owning_controller; @@ -1201,20 +1081,20 @@ static void scic_sds_port_ready_substate_configuring_enter(struct sci_base_state SCI_PORT_SUB_OPERATIONAL); } -static void scic_sds_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) +static void sci_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); - scic_sds_port_suspend_port_task_scheduler(iport); + sci_port_suspend_port_task_scheduler(iport); if (iport->ready_exit) - scic_sds_port_invalidate_dummy_remote_node(iport); + sci_port_invalidate_dummy_remote_node(iport); } -enum sci_status scic_sds_port_start(struct isci_port *iport) +enum sci_status sci_port_start(struct isci_port *iport) { struct isci_host *ihost = iport->owning_controller; enum sci_status status = SCI_SUCCESS; - enum scic_sds_port_states state; + enum sci_port_states state; u32 phy_mask; state = iport->sm.current_state_id; @@ -1234,11 +1114,11 @@ enum sci_status scic_sds_port_start(struct isci_port *iport) } if (iport->reserved_rni == SCU_DUMMY_INDEX) { - u16 rni = scic_sds_remote_node_table_allocate_remote_node( + u16 rni = sci_remote_node_table_allocate_remote_node( &ihost->available_remote_nodes, 1); if (rni != SCU_DUMMY_INDEX) - scic_sds_port_construct_dummy_rnc(iport, rni); + sci_port_construct_dummy_rnc(iport, rni); else status = SCI_FAILURE_INSUFFICIENT_RESOURCES; iport->reserved_rni = rni; @@ -1251,19 +1131,19 @@ enum sci_status scic_sds_port_start(struct isci_port *iport) if (tag == SCI_CONTROLLER_INVALID_IO_TAG) status = SCI_FAILURE_INSUFFICIENT_RESOURCES; else - scic_sds_port_construct_dummy_task(iport, tag); + sci_port_construct_dummy_task(iport, tag); iport->reserved_tag = tag; } if (status == SCI_SUCCESS) { - phy_mask = scic_sds_port_get_phys(iport); + phy_mask = sci_port_get_phys(iport); /* * There are one or more phys assigned to this port. Make sure * the port's phy mask is in fact legal and supported by the * silicon. */ - if (scic_sds_port_is_phy_mask_valid(iport, phy_mask) == true) { + if (sci_port_is_phy_mask_valid(iport, phy_mask) == true) { port_state_machine_change(iport, SCI_PORT_READY); @@ -1273,14 +1153,14 @@ enum sci_status scic_sds_port_start(struct isci_port *iport) } if (status != SCI_SUCCESS) - scic_sds_port_destroy_dummy_resources(iport); + sci_port_destroy_dummy_resources(iport); return status; } -enum sci_status scic_sds_port_stop(struct isci_port *iport) +enum sci_status sci_port_stop(struct isci_port *iport) { - enum scic_sds_port_states state; + enum sci_port_states state; state = iport->sm.current_state_id; switch (state) { @@ -1300,11 +1180,11 @@ enum sci_status scic_sds_port_stop(struct isci_port *iport) } } -static enum sci_status scic_port_hard_reset(struct isci_port *iport, u32 timeout) +static enum sci_status sci_port_hard_reset(struct isci_port *iport, u32 timeout) { enum sci_status status = SCI_FAILURE_INVALID_PHY; struct isci_phy *iphy = NULL; - enum scic_sds_port_states state; + enum sci_port_states state; u32 phy_index; state = iport->sm.current_state_id; @@ -1317,7 +1197,7 @@ static enum sci_status scic_port_hard_reset(struct isci_port *iport, u32 timeout /* Select a phy on which we can send the hard reset request. */ for (phy_index = 0; phy_index < SCI_MAX_PHYS && !iphy; phy_index++) { iphy = iport->phy_table[phy_index]; - if (iphy && !scic_sds_port_active_phy(iport, iphy)) { + if (iphy && !sci_port_active_phy(iport, iphy)) { /* * We found a phy but it is not ready select * different phy @@ -1329,7 +1209,7 @@ static enum sci_status scic_port_hard_reset(struct isci_port *iport, u32 timeout /* If we have a phy then go ahead and start the reset procedure */ if (!iphy) return status; - status = scic_sds_phy_reset(iphy); + status = sci_phy_reset(iphy); if (status != SCI_SUCCESS) return status; @@ -1342,7 +1222,7 @@ static enum sci_status scic_port_hard_reset(struct isci_port *iport, u32 timeout } /** - * scic_sds_port_add_phy() - + * sci_port_add_phy() - * @sci_port: This parameter specifies the port in which the phy will be added. * @sci_phy: This parameter is the phy which is to be added to the port. * @@ -1350,11 +1230,11 @@ static enum sci_status scic_port_hard_reset(struct isci_port *iport, u32 timeout * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other * status is a failure to add the phy to the port. */ -enum sci_status scic_sds_port_add_phy(struct isci_port *iport, +enum sci_status sci_port_add_phy(struct isci_port *iport, struct isci_phy *iphy) { enum sci_status status; - enum scic_sds_port_states state; + enum sci_port_states state; state = iport->sm.current_state_id; switch (state) { @@ -1362,7 +1242,7 @@ enum sci_status scic_sds_port_add_phy(struct isci_port *iport, struct sci_sas_address port_sas_address; /* Read the port assigned SAS Address if there is one */ - scic_sds_port_get_sas_address(iport, &port_sas_address); + sci_port_get_sas_address(iport, &port_sas_address); if (port_sas_address.high != 0 && port_sas_address.low != 0) { struct sci_sas_address phy_sas_address; @@ -1370,32 +1250,32 @@ enum sci_status scic_sds_port_add_phy(struct isci_port *iport, /* Make sure that the PHY SAS Address matches the SAS Address * for this port */ - scic_sds_phy_get_sas_address(iphy, &phy_sas_address); + sci_phy_get_sas_address(iphy, &phy_sas_address); if (port_sas_address.high != phy_sas_address.high || port_sas_address.low != phy_sas_address.low) return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; } - return scic_sds_port_set_phy(iport, iphy); + return sci_port_set_phy(iport, iphy); } case SCI_PORT_SUB_WAITING: case SCI_PORT_SUB_OPERATIONAL: - status = scic_sds_port_set_phy(iport, iphy); + status = sci_port_set_phy(iport, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, true); iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); return status; case SCI_PORT_SUB_CONFIGURING: - status = scic_sds_port_set_phy(iport, iphy); + status = sci_port_set_phy(iport, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, true); /* Re-enter the configuring state since this may be the last phy in * the port. @@ -1411,7 +1291,7 @@ enum sci_status scic_sds_port_add_phy(struct isci_port *iport, } /** - * scic_sds_port_remove_phy() - + * sci_port_remove_phy() - * @sci_port: This parameter specifies the port in which the phy will be added. * @sci_phy: This parameter is the phy which is to be added to the port. * @@ -1419,33 +1299,33 @@ enum sci_status scic_sds_port_add_phy(struct isci_port *iport, * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any * other status is a failure to add the phy to the port. */ -enum sci_status scic_sds_port_remove_phy(struct isci_port *iport, +enum sci_status sci_port_remove_phy(struct isci_port *iport, struct isci_phy *iphy) { enum sci_status status; - enum scic_sds_port_states state; + enum sci_port_states state; state = iport->sm.current_state_id; switch (state) { case SCI_PORT_STOPPED: - return scic_sds_port_clear_phy(iport, iphy); + return sci_port_clear_phy(iport, iphy); case SCI_PORT_SUB_OPERATIONAL: - status = scic_sds_port_clear_phy(iport, iphy); + status = sci_port_clear_phy(iport, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_deactivate_phy(iport, iphy, true); + sci_port_deactivate_phy(iport, iphy, true); iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; case SCI_PORT_SUB_CONFIGURING: - status = scic_sds_port_clear_phy(iport, iphy); + status = sci_port_clear_phy(iport, iphy); if (status != SCI_SUCCESS) return status; - scic_sds_port_deactivate_phy(iport, iphy, true); + sci_port_deactivate_phy(iport, iphy, true); /* Re-enter the configuring state since this may be the last phy in * the port @@ -1460,10 +1340,10 @@ enum sci_status scic_sds_port_remove_phy(struct isci_port *iport, } } -enum sci_status scic_sds_port_link_up(struct isci_port *iport, +enum sci_status sci_port_link_up(struct isci_port *iport, struct isci_phy *iphy) { - enum scic_sds_port_states state; + enum sci_port_states state; state = iport->sm.current_state_id; switch (state) { @@ -1471,13 +1351,13 @@ enum sci_status scic_sds_port_link_up(struct isci_port *iport, /* Since this is the first phy going link up for the port we * can just enable it and continue */ - scic_sds_port_activate_phy(iport, iphy, true); + sci_port_activate_phy(iport, iphy, true); port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); return SCI_SUCCESS; case SCI_PORT_SUB_OPERATIONAL: - scic_sds_port_general_link_up_handler(iport, iphy, true); + sci_port_general_link_up_handler(iport, iphy, true); return SCI_SUCCESS; case SCI_PORT_RESETTING: /* TODO We should make sure that the phy that has gone @@ -1494,7 +1374,7 @@ enum sci_status scic_sds_port_link_up(struct isci_port *iport, /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_general_link_up_handler(iport, iphy, false); + sci_port_general_link_up_handler(iport, iphy, false); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(iport), @@ -1503,15 +1383,15 @@ enum sci_status scic_sds_port_link_up(struct isci_port *iport, } } -enum sci_status scic_sds_port_link_down(struct isci_port *iport, +enum sci_status sci_port_link_down(struct isci_port *iport, struct isci_phy *iphy) { - enum scic_sds_port_states state; + enum sci_port_states state; state = iport->sm.current_state_id; switch (state) { case SCI_PORT_SUB_OPERATIONAL: - scic_sds_port_deactivate_phy(iport, iphy, true); + sci_port_deactivate_phy(iport, iphy, true); /* If there are no active phys left in the port, then * transition the port to the WAITING state until such time @@ -1524,7 +1404,7 @@ enum sci_status scic_sds_port_link_down(struct isci_port *iport, case SCI_PORT_RESETTING: /* In the resetting state we don't notify the user regarding * link up and link down notifications. */ - scic_sds_port_deactivate_phy(iport, iphy, false); + sci_port_deactivate_phy(iport, iphy, false); return SCI_SUCCESS; default: dev_warn(sciport_to_dev(iport), @@ -1533,11 +1413,11 @@ enum sci_status scic_sds_port_link_down(struct isci_port *iport, } } -enum sci_status scic_sds_port_start_io(struct isci_port *iport, - struct isci_remote_device *idev, - struct isci_request *ireq) +enum sci_status sci_port_start_io(struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq) { - enum scic_sds_port_states state; + enum sci_port_states state; state = iport->sm.current_state_id; switch (state) { @@ -1553,11 +1433,11 @@ enum sci_status scic_sds_port_start_io(struct isci_port *iport, } } -enum sci_status scic_sds_port_complete_io(struct isci_port *iport, - struct isci_remote_device *idev, - struct isci_request *ireq) +enum sci_status sci_port_complete_io(struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq) { - enum scic_sds_port_states state; + enum sci_port_states state; state = iport->sm.current_state_id; switch (state) { @@ -1566,7 +1446,7 @@ enum sci_status scic_sds_port_complete_io(struct isci_port *iport, "%s: in wrong state: %d\n", __func__, state); return SCI_FAILURE_INVALID_STATE; case SCI_PORT_STOPPING: - scic_sds_port_decrement_request_count(iport); + sci_port_decrement_request_count(iport); if (iport->started_request_count == 0) port_state_machine_change(iport, @@ -1577,10 +1457,10 @@ enum sci_status scic_sds_port_complete_io(struct isci_port *iport, case SCI_PORT_FAILED: case SCI_PORT_SUB_WAITING: case SCI_PORT_SUB_OPERATIONAL: - scic_sds_port_decrement_request_count(iport); + sci_port_decrement_request_count(iport); break; case SCI_PORT_SUB_CONFIGURING: - scic_sds_port_decrement_request_count(iport); + sci_port_decrement_request_count(iport); if (iport->started_request_count == 0) { port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL); @@ -1590,32 +1470,17 @@ enum sci_status scic_sds_port_complete_io(struct isci_port *iport, return SCI_SUCCESS; } -/** - * - * @sci_port: This is the port object which to suspend. - * - * This method will enable the SCU Port Task Scheduler for this port object but - * will leave the port task scheduler in a suspended state. none - */ -static void -scic_sds_port_enable_port_task_scheduler(struct isci_port *iport) +static void sci_port_enable_port_task_scheduler(struct isci_port *iport) { u32 pts_control_value; + /* enable the port task scheduler in a suspended state */ pts_control_value = readl(&iport->port_task_scheduler_registers->control); pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); writel(pts_control_value, &iport->port_task_scheduler_registers->control); } -/** - * - * @sci_port: This is the port object which to resume. - * - * This method will disable the SCU port task scheduler for this port object. - * none - */ -static void -scic_sds_port_disable_port_task_scheduler(struct isci_port *iport) +static void sci_port_disable_port_task_scheduler(struct isci_port *iport) { u32 pts_control_value; @@ -1625,7 +1490,7 @@ scic_sds_port_disable_port_task_scheduler(struct isci_port *iport) writel(pts_control_value, &iport->port_task_scheduler_registers->control); } -static void scic_sds_port_post_dummy_remote_node(struct isci_port *iport) +static void sci_port_post_dummy_remote_node(struct isci_port *iport) { struct isci_host *ihost = iport->owning_controller; u8 phys_index = iport->physical_port_index; @@ -1639,7 +1504,7 @@ static void scic_sds_port_post_dummy_remote_node(struct isci_port *iport) command = SCU_CONTEXT_COMMAND_POST_RNC_32 | phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - scic_sds_controller_post_request(ihost, command); + sci_controller_post_request(ihost, command); /* ensure hardware has seen the post rnc command and give it * ample time to act before sending the suspend @@ -1650,10 +1515,10 @@ static void scic_sds_port_post_dummy_remote_node(struct isci_port *iport) command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; - scic_sds_controller_post_request(ihost, command); + sci_controller_post_request(ihost, command); } -static void scic_sds_port_stopped_state_enter(struct sci_base_state_machine *sm) +static void sci_port_stopped_state_enter(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); @@ -1662,19 +1527,19 @@ static void scic_sds_port_stopped_state_enter(struct sci_base_state_machine *sm) * If we enter this state becasuse of a request to stop * the port then we want to disable the hardwares port * task scheduler. */ - scic_sds_port_disable_port_task_scheduler(iport); + sci_port_disable_port_task_scheduler(iport); } } -static void scic_sds_port_stopped_state_exit(struct sci_base_state_machine *sm) +static void sci_port_stopped_state_exit(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); /* Enable and suspend the port task scheduler */ - scic_sds_port_enable_port_task_scheduler(iport); + sci_port_enable_port_task_scheduler(iport); } -static void scic_sds_port_ready_state_enter(struct sci_base_state_machine *sm) +static void sci_port_ready_state_enter(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); struct isci_host *ihost = iport->owning_controller; @@ -1687,30 +1552,30 @@ static void scic_sds_port_ready_state_enter(struct sci_base_state_machine *sm) isci_port_not_ready(ihost, iport); /* Post and suspend the dummy remote node context for this port. */ - scic_sds_port_post_dummy_remote_node(iport); + sci_port_post_dummy_remote_node(iport); /* Start the ready substate machine */ port_state_machine_change(iport, SCI_PORT_SUB_WAITING); } -static void scic_sds_port_resetting_state_exit(struct sci_base_state_machine *sm) +static void sci_port_resetting_state_exit(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); sci_del_timer(&iport->timer); } -static void scic_sds_port_stopping_state_exit(struct sci_base_state_machine *sm) +static void sci_port_stopping_state_exit(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); sci_del_timer(&iport->timer); - scic_sds_port_destroy_dummy_resources(iport); + sci_port_destroy_dummy_resources(iport); } -static void scic_sds_port_failed_state_enter(struct sci_base_state_machine *sm) +static void sci_port_failed_state_enter(struct sci_base_state_machine *sm) { struct isci_port *iport = container_of(sm, typeof(*iport), sm); @@ -1719,40 +1584,40 @@ static void scic_sds_port_failed_state_enter(struct sci_base_state_machine *sm) /* --------------------------------------------------------------------------- */ -static const struct sci_base_state scic_sds_port_state_table[] = { +static const struct sci_base_state sci_port_state_table[] = { [SCI_PORT_STOPPED] = { - .enter_state = scic_sds_port_stopped_state_enter, - .exit_state = scic_sds_port_stopped_state_exit + .enter_state = sci_port_stopped_state_enter, + .exit_state = sci_port_stopped_state_exit }, [SCI_PORT_STOPPING] = { - .exit_state = scic_sds_port_stopping_state_exit + .exit_state = sci_port_stopping_state_exit }, [SCI_PORT_READY] = { - .enter_state = scic_sds_port_ready_state_enter, + .enter_state = sci_port_ready_state_enter, }, [SCI_PORT_SUB_WAITING] = { - .enter_state = scic_sds_port_ready_substate_waiting_enter, + .enter_state = sci_port_ready_substate_waiting_enter, }, [SCI_PORT_SUB_OPERATIONAL] = { - .enter_state = scic_sds_port_ready_substate_operational_enter, - .exit_state = scic_sds_port_ready_substate_operational_exit + .enter_state = sci_port_ready_substate_operational_enter, + .exit_state = sci_port_ready_substate_operational_exit }, [SCI_PORT_SUB_CONFIGURING] = { - .enter_state = scic_sds_port_ready_substate_configuring_enter, - .exit_state = scic_sds_port_ready_substate_configuring_exit + .enter_state = sci_port_ready_substate_configuring_enter, + .exit_state = sci_port_ready_substate_configuring_exit }, [SCI_PORT_RESETTING] = { - .exit_state = scic_sds_port_resetting_state_exit + .exit_state = sci_port_resetting_state_exit }, [SCI_PORT_FAILED] = { - .enter_state = scic_sds_port_failed_state_enter, + .enter_state = sci_port_failed_state_enter, } }; -void scic_sds_port_construct(struct isci_port *iport, u8 index, +void sci_port_construct(struct isci_port *iport, u8 index, struct isci_host *ihost) { - sci_init_sm(&iport->sm, scic_sds_port_state_table, SCI_PORT_STOPPED); + sci_init_sm(&iport->sm, sci_port_state_table, SCI_PORT_STOPPED); iport->logical_port_index = SCIC_SDS_DUMMY_PORT; iport->physical_port_index = index; @@ -1798,9 +1663,7 @@ enum isci_status isci_port_get_state( return isci_port->status; } -void scic_sds_port_broadcast_change_received( - struct isci_port *iport, - struct isci_phy *iphy) +void sci_port_broadcast_change_received(struct isci_port *iport, struct isci_phy *iphy) { struct isci_host *ihost = iport->owning_controller; @@ -1823,7 +1686,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor spin_lock_irqsave(&ihost->scic_lock, flags); #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT - status = scic_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT); + status = sci_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT); spin_unlock_irqrestore(&ihost->scic_lock, flags); @@ -1840,7 +1703,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor ret = TMF_RESP_FUNC_FAILED; dev_err(&ihost->pdev->dev, - "%s: iport = %p; scic_port_hard_reset call" + "%s: iport = %p; sci_port_hard_reset call" " failed 0x%x\n", __func__, iport, status); @@ -1863,8 +1726,8 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor if (!iphy) continue; - scic_sds_phy_stop(iphy); - scic_sds_phy_start(iphy); + sci_phy_stop(iphy); + sci_phy_start(iphy); } spin_unlock_irqrestore(&ihost->scic_lock, flags); } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 9a9be7b..4c4ab81 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -123,7 +123,7 @@ struct isci_port { struct scu_viit_entry __iomem *viit_registers; }; -enum scic_port_not_ready_reason_code { +enum sci_port_not_ready_reason_code { SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, @@ -132,25 +132,25 @@ enum scic_port_not_ready_reason_code { SCIC_PORT_NOT_READY_REASON_CODE_MAX }; -struct scic_port_end_point_properties { +struct sci_port_end_point_properties { struct sci_sas_address sas_address; - struct scic_phy_proto protocols; + struct sci_phy_proto protocols; }; -struct scic_port_properties { +struct sci_port_properties { u32 index; - struct scic_port_end_point_properties local; - struct scic_port_end_point_properties remote; + struct sci_port_end_point_properties local; + struct sci_port_end_point_properties remote; u32 phy_mask; }; /** - * enum scic_sds_port_states - This enumeration depicts all the states for the + * enum sci_port_states - This enumeration depicts all the states for the * common port state machine. * * */ -enum scic_sds_port_states { +enum sci_port_states { /** * This state indicates that the port has successfully been stopped. * In this state no new IO operations are permitted. @@ -211,23 +211,23 @@ enum scic_sds_port_states { }; /** - * scic_sds_port_get_controller() - + * sci_port_get_controller() - * * Helper macro to get the owning controller of this port */ -#define scic_sds_port_get_controller(this_port) \ +#define sci_port_get_controller(this_port) \ ((this_port)->owning_controller) /** - * scic_sds_port_get_index() - + * sci_port_get_index() - * * This macro returns the physical port index for this port object */ -#define scic_sds_port_get_index(this_port) \ +#define sci_port_get_index(this_port) \ ((this_port)->physical_port_index) -static inline void scic_sds_port_decrement_request_count(struct isci_port *iport) +static inline void sci_port_decrement_request_count(struct isci_port *iport) { if (WARN_ONCE(iport->started_request_count == 0, "%s: tried to decrement started_request_count past 0!?", @@ -237,79 +237,73 @@ static inline void scic_sds_port_decrement_request_count(struct isci_port *iport iport->started_request_count--; } -#define scic_sds_port_active_phy(port, phy) \ +#define sci_port_active_phy(port, phy) \ (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) -void scic_sds_port_construct( +void sci_port_construct( struct isci_port *iport, u8 port_index, struct isci_host *ihost); -enum sci_status scic_sds_port_initialize( - struct isci_port *iport, - void __iomem *port_task_scheduler_registers, - void __iomem *port_configuration_regsiter, - void __iomem *viit_registers); - -enum sci_status scic_sds_port_start(struct isci_port *iport); -enum sci_status scic_sds_port_stop(struct isci_port *iport); +enum sci_status sci_port_start(struct isci_port *iport); +enum sci_status sci_port_stop(struct isci_port *iport); -enum sci_status scic_sds_port_add_phy( +enum sci_status sci_port_add_phy( struct isci_port *iport, struct isci_phy *iphy); -enum sci_status scic_sds_port_remove_phy( +enum sci_status sci_port_remove_phy( struct isci_port *iport, struct isci_phy *iphy); -void scic_sds_port_setup_transports( +void sci_port_setup_transports( struct isci_port *iport, u32 device_id); void isci_port_bcn_enable(struct isci_host *, struct isci_port *); -void scic_sds_port_deactivate_phy( +void sci_port_deactivate_phy( struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user); -bool scic_sds_port_link_detected( +bool sci_port_link_detected( struct isci_port *iport, struct isci_phy *iphy); -enum sci_status scic_sds_port_link_up(struct isci_port *iport, +enum sci_status sci_port_link_up(struct isci_port *iport, struct isci_phy *iphy); -enum sci_status scic_sds_port_link_down(struct isci_port *iport, +enum sci_status sci_port_link_down(struct isci_port *iport, struct isci_phy *iphy); struct isci_request; struct isci_remote_device; -enum sci_status scic_sds_port_start_io( +enum sci_status sci_port_start_io( struct isci_port *iport, struct isci_remote_device *idev, struct isci_request *ireq); -enum sci_status scic_sds_port_complete_io( +enum sci_status sci_port_complete_io( struct isci_port *iport, struct isci_remote_device *idev, struct isci_request *ireq); -enum sas_linkrate scic_sds_port_get_max_allowed_speed( +enum sas_linkrate sci_port_get_max_allowed_speed( struct isci_port *iport); -void scic_sds_port_broadcast_change_received( +void sci_port_broadcast_change_received( struct isci_port *iport, struct isci_phy *iphy); -bool scic_sds_port_is_valid_phy_assignment( +bool sci_port_is_valid_phy_assignment( struct isci_port *iport, u32 phy_index); -void scic_sds_port_get_sas_address( +void sci_port_get_sas_address( struct isci_port *iport, struct sci_sas_address *sas_address); -void scic_sds_port_get_attached_sas_address( +void sci_port_get_attached_sas_address( struct isci_port *iport, struct sci_sas_address *sas_address); diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index a0a135d..c8b16db 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -112,7 +112,7 @@ static s32 sci_sas_address_compare( * port. port address if the port can be found to match the phy. * NULL if there is no matching port for the phy. */ -static struct isci_port *scic_sds_port_configuration_agent_find_port( +static struct isci_port *sci_port_configuration_agent_find_port( struct isci_host *ihost, struct isci_phy *iphy) { @@ -127,14 +127,14 @@ static struct isci_port *scic_sds_port_configuration_agent_find_port( * more phys match the sent and received SAS address as this phy in which * case it should participate in the same port. */ - scic_sds_phy_get_sas_address(iphy, &phy_sas_address); - scic_sds_phy_get_attached_sas_address(iphy, &phy_attached_device_address); + sci_phy_get_sas_address(iphy, &phy_sas_address); + sci_phy_get_attached_sas_address(iphy, &phy_attached_device_address); for (i = 0; i < ihost->logical_port_entries; i++) { struct isci_port *iport = &ihost->ports[i]; - scic_sds_port_get_sas_address(iport, &port_sas_address); - scic_sds_port_get_attached_sas_address(iport, &port_attached_device_address); + sci_port_get_sas_address(iport, &port_sas_address); + sci_port_get_attached_sas_address(iport, &port_attached_device_address); if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) @@ -156,9 +156,9 @@ static struct isci_port *scic_sds_port_configuration_agent_find_port( * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION * the port configuration is not valid for this port configuration agent. */ -static enum sci_status scic_sds_port_configuration_agent_validate_ports( +static enum sci_status sci_port_configuration_agent_validate_ports( struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent) + struct sci_port_configuration_agent *port_agent) { struct sci_sas_address first_address; struct sci_sas_address second_address; @@ -194,8 +194,8 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * PE0 and PE3 can never have the same SAS Address unless they * are part of the same x4 wide port and we have already checked * for this condition. */ - scic_sds_phy_get_sas_address(&ihost->phys[0], &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[3], &second_address); + sci_phy_get_sas_address(&ihost->phys[0], &first_address); + sci_phy_get_sas_address(&ihost->phys[3], &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -207,8 +207,8 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * part of the same port. */ if (port_agent->phy_valid_port_range[0].min_index == 0 && port_agent->phy_valid_port_range[1].min_index == 1) { - scic_sds_phy_get_sas_address(&ihost->phys[0], &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[2], &second_address); + sci_phy_get_sas_address(&ihost->phys[0], &first_address); + sci_phy_get_sas_address(&ihost->phys[2], &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -221,8 +221,8 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( * part of the same port. */ if (port_agent->phy_valid_port_range[2].min_index == 2 && port_agent->phy_valid_port_range[3].min_index == 3) { - scic_sds_phy_get_sas_address(&ihost->phys[1], &first_address); - scic_sds_phy_get_sas_address(&ihost->phys[3], &second_address); + sci_phy_get_sas_address(&ihost->phys[1], &first_address); + sci_phy_get_sas_address(&ihost->phys[3], &second_address); if (sci_sas_address_compare(first_address, second_address) == 0) { return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; @@ -239,8 +239,8 @@ static enum sci_status scic_sds_port_configuration_agent_validate_ports( /* verify all of the phys in the same port are using the same SAS address */ static enum sci_status -scic_sds_mpc_agent_validate_phy_configuration(struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent) +sci_mpc_agent_validate_phy_configuration(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) { u32 phy_mask; u32 assigned_phy_mask; @@ -254,7 +254,7 @@ scic_sds_mpc_agent_validate_phy_configuration(struct isci_host *ihost, sas_address.low = 0; for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { - phy_mask = ihost->oem_parameters.sds1.ports[port_index].phy_mask; + phy_mask = ihost->oem_parameters.ports[port_index].phy_mask; if (!phy_mask) continue; @@ -269,7 +269,7 @@ scic_sds_mpc_agent_validate_phy_configuration(struct isci_host *ihost, for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { if ((phy_mask & (1 << phy_index)) == 0) continue; - scic_sds_phy_get_sas_address(&ihost->phys[phy_index], + sci_phy_get_sas_address(&ihost->phys[phy_index], &sas_address); /* @@ -294,7 +294,7 @@ scic_sds_mpc_agent_validate_phy_configuration(struct isci_host *ihost, while (phy_index < SCI_MAX_PHYS) { if ((phy_mask & (1 << phy_index)) == 0) continue; - scic_sds_phy_get_sas_address(&ihost->phys[phy_index], + sci_phy_get_sas_address(&ihost->phys[phy_index], &phy_assigned_address); if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { @@ -307,7 +307,7 @@ scic_sds_mpc_agent_validate_phy_configuration(struct isci_host *ihost, port_agent->phy_valid_port_range[phy_index].min_index = port_index; port_agent->phy_valid_port_range[phy_index].max_index = phy_index; - scic_sds_port_add_phy(&ihost->ports[port_index], + sci_port_add_phy(&ihost->ports[port_index], &ihost->phys[phy_index]); assigned_phy_mask |= (1 << phy_index); @@ -316,14 +316,14 @@ scic_sds_mpc_agent_validate_phy_configuration(struct isci_host *ihost, phy_index++; } - return scic_sds_port_configuration_agent_validate_ports(ihost, port_agent); + return sci_port_configuration_agent_validate_ports(ihost, port_agent); } static void mpc_agent_timeout(unsigned long data) { u8 index; struct sci_timer *tmr = (struct sci_timer *)data; - struct scic_sds_port_configuration_agent *port_agent; + struct sci_port_configuration_agent *port_agent; struct isci_host *ihost; unsigned long flags; u16 configure_phy_mask; @@ -355,8 +355,8 @@ done: spin_unlock_irqrestore(&ihost->scic_lock, flags); } -static void scic_sds_mpc_agent_link_up(struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent, +static void sci_mpc_agent_link_up(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, struct isci_port *iport, struct isci_phy *iphy) { @@ -367,10 +367,10 @@ static void scic_sds_mpc_agent_link_up(struct isci_host *ihost, if (!iport) return; - port_agent->phy_ready_mask |= (1 << scic_sds_phy_get_index(iphy)); - scic_sds_port_link_up(iport, iphy); - if ((iport->active_phy_mask & (1 << scic_sds_phy_get_index(iphy)))) - port_agent->phy_configured_mask |= (1 << scic_sds_phy_get_index(iphy)); + port_agent->phy_ready_mask |= (1 << sci_phy_get_index(iphy)); + sci_port_link_up(iport, iphy); + if ((iport->active_phy_mask & (1 << sci_phy_get_index(iphy)))) + port_agent->phy_configured_mask |= (1 << sci_phy_get_index(iphy)); } /** @@ -390,9 +390,9 @@ static void scic_sds_mpc_agent_link_up(struct isci_host *ihost, * not associated with a port there is no action taken. Is it possible to get a * link down notification from a phy that has no assocoated port? */ -static void scic_sds_mpc_agent_link_down( +static void sci_mpc_agent_link_down( struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent, + struct sci_port_configuration_agent *port_agent, struct isci_port *iport, struct isci_phy *iphy) { @@ -405,9 +405,9 @@ static void scic_sds_mpc_agent_link_down( * state. */ port_agent->phy_ready_mask &= - ~(1 << scic_sds_phy_get_index(iphy)); + ~(1 << sci_phy_get_index(iphy)); port_agent->phy_configured_mask &= - ~(1 << scic_sds_phy_get_index(iphy)); + ~(1 << sci_phy_get_index(iphy)); /* * Check to see if there are more phys waiting to be @@ -424,7 +424,7 @@ static void scic_sds_mpc_agent_link_down( SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); } - scic_sds_port_link_down(iport, iphy); + sci_port_link_down(iport, iphy); } } @@ -432,8 +432,8 @@ static void scic_sds_mpc_agent_link_down( * configuration mode. */ static enum sci_status -scic_sds_apc_agent_validate_phy_configuration(struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent) +sci_apc_agent_validate_phy_configuration(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) { u8 phy_index; u8 port_index; @@ -446,11 +446,11 @@ scic_sds_apc_agent_validate_phy_configuration(struct isci_host *ihost, port_index = phy_index; /* Get the assigned SAS Address for the first PHY on the controller. */ - scic_sds_phy_get_sas_address(&ihost->phys[phy_index], + sci_phy_get_sas_address(&ihost->phys[phy_index], &sas_address); while (++phy_index < SCI_MAX_PHYS) { - scic_sds_phy_get_sas_address(&ihost->phys[phy_index], + sci_phy_get_sas_address(&ihost->phys[phy_index], &phy_assigned_address); /* Verify each of the SAS address are all the same for every PHY */ @@ -465,11 +465,11 @@ scic_sds_apc_agent_validate_phy_configuration(struct isci_host *ihost, } } - return scic_sds_port_configuration_agent_validate_ports(ihost, port_agent); + return sci_port_configuration_agent_validate_ports(ihost, port_agent); } -static void scic_sds_apc_agent_configure_ports(struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent, +static void sci_apc_agent_configure_ports(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, struct isci_phy *iphy, bool start_timer) { @@ -478,10 +478,10 @@ static void scic_sds_apc_agent_configure_ports(struct isci_host *ihost, struct isci_port *iport; enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; - iport = scic_sds_port_configuration_agent_find_port(ihost, iphy); + iport = sci_port_configuration_agent_find_port(ihost, iphy); if (iport) { - if (scic_sds_port_is_valid_phy_assignment(iport, iphy->phy_index)) + if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) apc_activity = SCIC_SDS_APC_ADD_PHY; else apc_activity = SCIC_SDS_APC_SKIP_PHY; @@ -499,7 +499,7 @@ static void scic_sds_apc_agent_configure_ports(struct isci_host *ihost, iport = &ihost->ports[port_index]; /* First we must make sure that this PHY can be added to this Port. */ - if (scic_sds_port_is_valid_phy_assignment(iport, iphy->phy_index)) { + if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) { /* * Port contains a PHY with a greater PHY ID than the current * PHY that has gone link up. This phy can not be part of any @@ -559,7 +559,7 @@ static void scic_sds_apc_agent_configure_ports(struct isci_host *ihost, switch (apc_activity) { case SCIC_SDS_APC_ADD_PHY: - status = scic_sds_port_add_phy(iport, iphy); + status = sci_port_add_phy(iport, iphy); if (status == SCI_SUCCESS) { port_agent->phy_configured_mask |= (1 << iphy->phy_index); @@ -588,7 +588,7 @@ static void scic_sds_apc_agent_configure_ports(struct isci_host *ihost, } /** - * scic_sds_apc_agent_link_up - handle apc link up events + * sci_apc_agent_link_up - handle apc link up events * @scic: This is the controller object that receives the link up * notification. * @sci_port: This is the port object associated with the phy. If the is no @@ -599,8 +599,8 @@ static void scic_sds_apc_agent_configure_ports(struct isci_host *ihost, * notifications. Is it possible to get a link down notification from a phy * that has no assocoated port? */ -static void scic_sds_apc_agent_link_up(struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent, +static void sci_apc_agent_link_up(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, struct isci_port *iport, struct isci_phy *iphy) { @@ -609,7 +609,7 @@ static void scic_sds_apc_agent_link_up(struct isci_host *ihost, if (!iport) { /* the phy is not the part of this port */ port_agent->phy_ready_mask |= 1 << phy_index; - scic_sds_apc_agent_configure_ports(ihost, port_agent, iphy, true); + sci_apc_agent_configure_ports(ihost, port_agent, iphy, true); } else { /* the phy is already the part of the port */ u32 port_state = iport->sm.current_state_id; @@ -620,7 +620,7 @@ static void scic_sds_apc_agent_link_up(struct isci_host *ihost, */ BUG_ON(port_state != SCI_PORT_RESETTING); port_agent->phy_ready_mask |= 1 << phy_index; - scic_sds_port_link_up(iport, iphy); + sci_port_link_up(iport, iphy); } } @@ -637,20 +637,20 @@ static void scic_sds_apc_agent_link_up(struct isci_host *ihost, * possible to get a link down notification from a phy that has no assocoated * port? */ -static void scic_sds_apc_agent_link_down( +static void sci_apc_agent_link_down( struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent, + struct sci_port_configuration_agent *port_agent, struct isci_port *iport, struct isci_phy *iphy) { - port_agent->phy_ready_mask &= ~(1 << scic_sds_phy_get_index(iphy)); + port_agent->phy_ready_mask &= ~(1 << sci_phy_get_index(iphy)); if (!iport) return; if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) { enum sci_status status; - status = scic_sds_port_remove_phy(iport, iphy); + status = sci_port_remove_phy(iport, iphy); if (status == SCI_SUCCESS) port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); @@ -662,7 +662,7 @@ static void apc_agent_timeout(unsigned long data) { u32 index; struct sci_timer *tmr = (struct sci_timer *)data; - struct scic_sds_port_configuration_agent *port_agent; + struct sci_port_configuration_agent *port_agent; struct isci_host *ihost; unsigned long flags; u16 configure_phy_mask; @@ -686,7 +686,7 @@ static void apc_agent_timeout(unsigned long data) if ((configure_phy_mask & (1 << index)) == 0) continue; - scic_sds_apc_agent_configure_ports(ihost, port_agent, + sci_apc_agent_configure_ports(ihost, port_agent, &ihost->phys[index], false); } @@ -706,8 +706,8 @@ done: * call is universal for both manual port configuration and automatic port * configuration modes. */ -void scic_sds_port_configuration_agent_construct( - struct scic_sds_port_configuration_agent *port_agent) +void sci_port_configuration_agent_construct( + struct sci_port_configuration_agent *port_agent) { u32 index; @@ -725,29 +725,29 @@ void scic_sds_port_configuration_agent_construct( } } -enum sci_status scic_sds_port_configuration_agent_initialize( +enum sci_status sci_port_configuration_agent_initialize( struct isci_host *ihost, - struct scic_sds_port_configuration_agent *port_agent) + struct sci_port_configuration_agent *port_agent) { enum sci_status status; - enum scic_port_configuration_mode mode; + enum sci_port_configuration_mode mode; - mode = ihost->oem_parameters.sds1.controller.mode_type; + mode = ihost->oem_parameters.controller.mode_type; if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { - status = scic_sds_mpc_agent_validate_phy_configuration( + status = sci_mpc_agent_validate_phy_configuration( ihost, port_agent); - port_agent->link_up_handler = scic_sds_mpc_agent_link_up; - port_agent->link_down_handler = scic_sds_mpc_agent_link_down; + port_agent->link_up_handler = sci_mpc_agent_link_up; + port_agent->link_down_handler = sci_mpc_agent_link_down; sci_init_timer(&port_agent->timer, mpc_agent_timeout); } else { - status = scic_sds_apc_agent_validate_phy_configuration( + status = sci_apc_agent_validate_phy_configuration( ihost, port_agent); - port_agent->link_up_handler = scic_sds_apc_agent_link_up; - port_agent->link_down_handler = scic_sds_apc_agent_link_down; + port_agent->link_up_handler = sci_apc_agent_link_up; + port_agent->link_down_handler = sci_apc_agent_link_down; sci_init_timer(&port_agent->timer, apc_agent_timeout); } diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 99b13c1..c7732fb 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -111,25 +111,15 @@ struct isci_orom *isci_request_oprom(struct pci_dev *pdev) return rom; } -/** - * isci_parse_oem_parameters() - This method will take OEM parameters - * from the module init parameters and copy them to oem_params. This will - * only copy values that are not set to the module parameter default values - * @oem_parameters: This parameter specifies the controller default OEM - * parameters. It is expected that this has been initialized to the default - * parameters for the controller - * - * - */ -enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params, +enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem, struct isci_orom *orom, int scu_index) { /* check for valid inputs */ if (scu_index < 0 || scu_index >= SCI_MAX_CONTROLLERS || - scu_index > orom->hdr.num_elements || !oem_params) + scu_index > orom->hdr.num_elements || !oem) return -EINVAL; - oem_params->sds1 = orom->ctrl[scu_index]; + *oem = orom->ctrl[scu_index]; return 0; } diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index e40cb5f..dc007e6 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -74,7 +74,7 @@ #define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED /* parameters that can be set by module parameters */ -struct scic_sds_user_parameters { +struct sci_user_parameters { struct sci_phy_user_params { /** * This field specifies the NOTIFY (ENABLE SPIN UP) primitive @@ -147,30 +147,16 @@ struct scic_sds_user_parameters { }; -/* XXX kill this union */ -union scic_user_parameters { - /** - * This field specifies the user parameters specific to the - * Storage Controller Unit (SCU) Driver Standard (SDS) version - * 1. - */ - struct scic_sds_user_parameters sds1; -}; - #define SCIC_SDS_PARM_PHY_MASK_MIN 0x0 #define SCIC_SDS_PARM_PHY_MASK_MAX 0xF #define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 -struct scic_sds_oem_params; -int scic_oem_parameters_validate(struct scic_sds_oem_params *oem); - -union scic_oem_parameters; -void scic_oem_parameters_get(struct isci_host *ihost, - union scic_oem_parameters *oem); +struct sci_oem_params; +int sci_oem_parameters_validate(struct sci_oem_params *oem); struct isci_orom; struct isci_orom *isci_request_oprom(struct pci_dev *pdev); -enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem, +enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem, struct isci_orom *orom, int scu_index); struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw); struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); @@ -214,7 +200,7 @@ struct isci_oem_hdr { * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs * being assigned is sufficient to declare manual PORT configuration. */ -enum scic_port_configuration_mode { +enum sci_port_configuration_mode { SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0, SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1 }; @@ -230,7 +216,7 @@ struct sci_bios_oem_param_block_hdr { uint8_t reserved[8]; } __attribute__ ((packed)); -struct scic_sds_oem_params { +struct sci_oem_params { struct { uint8_t mode_type; uint8_t max_concurrent_dev_spin_up; @@ -255,19 +241,9 @@ struct scic_sds_oem_params { } phys[SCI_MAX_PHYS]; } __attribute__ ((packed)); -/* XXX kill this union */ -union scic_oem_parameters { - /** - * This field specifies the OEM parameters specific to the - * Storage Controller Unit (SCU) Driver Standard (SDS) version - * 1. - */ - struct scic_sds_oem_params sds1; -}; - struct isci_orom { struct sci_bios_oem_param_block_hdr hdr; - struct scic_sds_oem_params ctrl[SCI_MAX_CONTROLLERS]; + struct sci_oem_params ctrl[SCI_MAX_CONTROLLERS]; } __attribute__ ((packed)); #endif diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 9043b45..8c752ab 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -68,7 +68,7 @@ * @isci_host: This parameter specifies the isci host object. * @isci_device: This parameter specifies the remote device * - * scic_lock is held on entrance to this function. + * sci_lock is held on entrance to this function. */ static void isci_remote_device_not_ready(struct isci_host *ihost, struct isci_remote_device *idev, u32 reason) @@ -92,7 +92,7 @@ static void isci_remote_device_not_ready(struct isci_host *ihost, "%s: isci_device = %p request = %p\n", __func__, idev, ireq); - scic_controller_terminate_request(ihost, + sci_controller_terminate_request(ihost, idev, ireq); } @@ -133,7 +133,7 @@ static void rnc_destruct_done(void *_dev) sci_change_state(&idev->sm, SCI_DEV_STOPPED); } -static enum sci_status scic_sds_remote_device_terminate_requests(struct isci_remote_device *idev) +static enum sci_status sci_remote_device_terminate_requests(struct isci_remote_device *idev) { struct isci_host *ihost = idev->owning_port->owning_controller; enum sci_status status = SCI_SUCCESS; @@ -147,7 +147,7 @@ static enum sci_status scic_sds_remote_device_terminate_requests(struct isci_rem ireq->target_device != idev) continue; - s = scic_controller_terminate_request(ihost, idev, ireq); + s = sci_controller_terminate_request(ihost, idev, ireq); if (s != SCI_SUCCESS) status = s; } @@ -155,11 +155,11 @@ static enum sci_status scic_sds_remote_device_terminate_requests(struct isci_rem return status; } -enum sci_status scic_remote_device_stop(struct isci_remote_device *idev, +enum sci_status sci_remote_device_stop(struct isci_remote_device *idev, u32 timeout) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; switch (state) { case SCI_DEV_INITIAL: @@ -174,7 +174,7 @@ enum sci_status scic_remote_device_stop(struct isci_remote_device *idev, case SCI_DEV_STARTING: /* device not started so there had better be no requests */ BUG_ON(idev->started_request_count != 0); - scic_sds_remote_node_context_destruct(&idev->rnc, + sci_remote_node_context_destruct(&idev->rnc, rnc_destruct_done, idev); /* Transition to the stopping state and wait for the * remote node to complete being posted and invalidated. @@ -191,28 +191,28 @@ enum sci_status scic_remote_device_stop(struct isci_remote_device *idev, case SCI_SMP_DEV_CMD: sci_change_state(sm, SCI_DEV_STOPPING); if (idev->started_request_count == 0) { - scic_sds_remote_node_context_destruct(&idev->rnc, + sci_remote_node_context_destruct(&idev->rnc, rnc_destruct_done, idev); return SCI_SUCCESS; } else - return scic_sds_remote_device_terminate_requests(idev); + return sci_remote_device_terminate_requests(idev); break; case SCI_DEV_STOPPING: /* All requests should have been terminated, but if there is an * attempt to stop a device already in the stopping state, then * try again to terminate. */ - return scic_sds_remote_device_terminate_requests(idev); + return sci_remote_device_terminate_requests(idev); case SCI_DEV_RESETTING: sci_change_state(sm, SCI_DEV_STOPPING); return SCI_SUCCESS; } } -enum sci_status scic_remote_device_reset(struct isci_remote_device *idev) +enum sci_status sci_remote_device_reset(struct isci_remote_device *idev) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; switch (state) { case SCI_DEV_INITIAL: @@ -239,10 +239,10 @@ enum sci_status scic_remote_device_reset(struct isci_remote_device *idev) } } -enum sci_status scic_remote_device_reset_complete(struct isci_remote_device *idev) +enum sci_status sci_remote_device_reset_complete(struct isci_remote_device *idev) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; if (state != SCI_DEV_RESETTING) { dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", @@ -254,11 +254,11 @@ enum sci_status scic_remote_device_reset_complete(struct isci_remote_device *ide return SCI_SUCCESS; } -enum sci_status scic_sds_remote_device_suspend(struct isci_remote_device *idev, +enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev, u32 suspend_type) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; if (state != SCI_STP_DEV_CMD) { dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", @@ -266,15 +266,15 @@ enum sci_status scic_sds_remote_device_suspend(struct isci_remote_device *idev, return SCI_FAILURE_INVALID_STATE; } - return scic_sds_remote_node_context_suspend(&idev->rnc, + return sci_remote_node_context_suspend(&idev->rnc, suspend_type, NULL, NULL); } -enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device *idev, +enum sci_status sci_remote_device_frame_handler(struct isci_remote_device *idev, u32 frame_index) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; struct isci_host *ihost = idev->owning_port->owning_controller; enum sci_status status; @@ -289,7 +289,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", __func__, state); /* Return the frame back to the controller */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_READY: case SCI_STP_DEV_NCQ_ERROR: @@ -302,7 +302,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * void *frame_header; ssize_t word_cnt; - status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, &frame_header); if (status != SCI_SUCCESS) @@ -311,22 +311,22 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * word_cnt = sizeof(hdr) / sizeof(u32); sci_swab32_cpy(&hdr, frame_header, word_cnt); - ireq = scic_request_by_tag(ihost, be16_to_cpu(hdr.tag)); + ireq = sci_request_by_tag(ihost, be16_to_cpu(hdr.tag)); if (ireq && ireq->target_device == idev) { /* The IO request is now in charge of releasing the frame */ - status = scic_sds_io_request_frame_handler(ireq, frame_index); + status = sci_io_request_frame_handler(ireq, frame_index); } else { /* We could not map this tag to a valid IO * request Just toss the frame and continue */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); } break; } case SCI_STP_DEV_NCQ: { struct dev_to_host_fis *hdr; - status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&hdr); if (status != SCI_SUCCESS) @@ -349,7 +349,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * } else status = SCI_FAILURE; - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); break; } case SCI_STP_DEV_CMD: @@ -358,7 +358,7 @@ enum sci_status scic_sds_remote_device_frame_handler(struct isci_remote_device * * in this state. All unsolicited frames are forwarded to the io request * object. */ - status = scic_sds_io_request_frame_handler(idev->working_request, frame_index); + status = sci_io_request_frame_handler(idev->working_request, frame_index); break; } @@ -369,7 +369,7 @@ static bool is_remote_device_ready(struct isci_remote_device *idev) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; switch (state) { case SCI_DEV_READY: @@ -386,25 +386,25 @@ static bool is_remote_device_ready(struct isci_remote_device *idev) } } -enum sci_status scic_sds_remote_device_event_handler(struct isci_remote_device *idev, +enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev, u32 event_code) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; enum sci_status status; switch (scu_get_event_type(event_code)) { case SCU_EVENT_TYPE_RNC_OPS_MISC: case SCU_EVENT_TYPE_RNC_SUSPEND_TX: case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - status = scic_sds_remote_node_context_event_handler(&idev->rnc, event_code); + status = sci_remote_node_context_event_handler(&idev->rnc, event_code); break; case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { status = SCI_SUCCESS; /* Suspend the associated RNC */ - scic_sds_remote_node_context_suspend(&idev->rnc, + sci_remote_node_context_suspend(&idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); @@ -439,13 +439,13 @@ enum sci_status scic_sds_remote_device_event_handler(struct isci_remote_device * */ if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) - status = scic_sds_remote_node_context_resume(&idev->rnc, NULL, NULL); + status = sci_remote_node_context_resume(&idev->rnc, NULL, NULL); } return status; } -static void scic_sds_remote_device_start_request(struct isci_remote_device *idev, +static void sci_remote_device_start_request(struct isci_remote_device *idev, struct isci_request *ireq, enum sci_status status) { @@ -453,19 +453,19 @@ static void scic_sds_remote_device_start_request(struct isci_remote_device *idev /* cleanup requests that failed after starting on the port */ if (status != SCI_SUCCESS) - scic_sds_port_complete_io(iport, idev, ireq); + sci_port_complete_io(iport, idev, ireq); else { kref_get(&idev->kref); - scic_sds_remote_device_increment_request_count(idev); + sci_remote_device_increment_request_count(idev); } } -enum sci_status scic_sds_remote_device_start_io(struct isci_host *ihost, +enum sci_status sci_remote_device_start_io(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; struct isci_port *iport = idev->owning_port; enum sci_status status; @@ -488,15 +488,15 @@ enum sci_status scic_sds_remote_device_start_io(struct isci_host *ihost, * successful it will start the request for the port object then * increment its own request count. */ - status = scic_sds_port_start_io(iport, idev, ireq); + status = sci_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&idev->rnc, ireq); + status = sci_remote_node_context_start_io(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(ireq); + status = sci_request_start(ireq); break; case SCI_STP_DEV_IDLE: { /* handle the start io operation for a sata device that is in @@ -507,18 +507,18 @@ enum sci_status scic_sds_remote_device_start_io(struct isci_host *ihost, * If this is a softreset we may want to have a different * substate. */ - enum scic_sds_remote_device_states new_state; + enum sci_remote_device_states new_state; struct sas_task *task = isci_request_access_task(ireq); - status = scic_sds_port_start_io(iport, idev, ireq); + status = sci_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&idev->rnc, ireq); + status = sci_remote_node_context_start_io(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(ireq); + status = sci_request_start(ireq); if (status != SCI_SUCCESS) break; @@ -535,15 +535,15 @@ enum sci_status scic_sds_remote_device_start_io(struct isci_host *ihost, struct sas_task *task = isci_request_access_task(ireq); if (task->ata_task.use_ncq) { - status = scic_sds_port_start_io(iport, idev, ireq); + status = sci_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&idev->rnc, ireq); + status = sci_remote_node_context_start_io(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(ireq); + status = sci_request_start(ireq); } else return SCI_FAILURE_INVALID_STATE; break; @@ -551,15 +551,15 @@ enum sci_status scic_sds_remote_device_start_io(struct isci_host *ihost, case SCI_STP_DEV_AWAIT_RESET: return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; case SCI_SMP_DEV_IDLE: - status = scic_sds_port_start_io(iport, idev, ireq); + status = sci_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_io(&idev->rnc, ireq); + status = sci_remote_node_context_start_io(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(ireq); + status = sci_request_start(ireq); if (status != SCI_SUCCESS) break; @@ -574,7 +574,7 @@ enum sci_status scic_sds_remote_device_start_io(struct isci_host *ihost, return SCI_FAILURE_INVALID_STATE; } - scic_sds_remote_device_start_request(idev, ireq, status); + sci_remote_device_start_request(idev, ireq, status); return status; } @@ -584,24 +584,24 @@ static enum sci_status common_complete_io(struct isci_port *iport, { enum sci_status status; - status = scic_sds_request_complete(ireq); + status = sci_request_complete(ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_port_complete_io(iport, idev, ireq); + status = sci_port_complete_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - scic_sds_remote_device_decrement_request_count(idev); + sci_remote_device_decrement_request_count(idev); return status; } -enum sci_status scic_sds_remote_device_complete_io(struct isci_host *ihost, +enum sci_status sci_remote_device_complete_io(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; struct isci_port *iport = idev->owning_port; enum sci_status status; @@ -636,7 +636,7 @@ enum sci_status scic_sds_remote_device_complete_io(struct isci_host *ihost, * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ sci_change_state(sm, SCI_STP_DEV_AWAIT_RESET); - } else if (scic_sds_remote_device_get_request_count(idev) == 0) + } else if (sci_remote_device_get_request_count(idev) == 0) sci_change_state(sm, SCI_STP_DEV_IDLE); break; case SCI_SMP_DEV_CMD: @@ -650,8 +650,8 @@ enum sci_status scic_sds_remote_device_complete_io(struct isci_host *ihost, if (status != SCI_SUCCESS) break; - if (scic_sds_remote_device_get_request_count(idev) == 0) - scic_sds_remote_node_context_destruct(&idev->rnc, + if (sci_remote_device_get_request_count(idev) == 0) + sci_remote_node_context_destruct(&idev->rnc, rnc_destruct_done, idev); break; @@ -668,21 +668,21 @@ enum sci_status scic_sds_remote_device_complete_io(struct isci_host *ihost, return status; } -static void scic_sds_remote_device_continue_request(void *dev) +static void sci_remote_device_continue_request(void *dev) { struct isci_remote_device *idev = dev; /* we need to check if this request is still valid to continue. */ if (idev->working_request) - scic_controller_continue_io(idev->working_request); + sci_controller_continue_io(idev->working_request); } -enum sci_status scic_sds_remote_device_start_task(struct isci_host *ihost, +enum sci_status sci_remote_device_start_task(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; struct isci_port *iport = idev->owning_port; enum sci_status status; @@ -705,15 +705,15 @@ enum sci_status scic_sds_remote_device_start_task(struct isci_host *ihost, case SCI_STP_DEV_NCQ: case SCI_STP_DEV_NCQ_ERROR: case SCI_STP_DEV_AWAIT_RESET: - status = scic_sds_port_start_io(iport, idev, ireq); + status = sci_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_task(&idev->rnc, ireq); + status = sci_remote_node_context_start_task(&idev->rnc, ireq); if (status != SCI_SUCCESS) goto out; - status = scic_sds_request_start(ireq); + status = sci_request_start(ireq); if (status != SCI_SUCCESS) goto out; @@ -731,32 +731,32 @@ enum sci_status scic_sds_remote_device_start_task(struct isci_host *ihost, * the correct action when the remote node context is suspended * and later resumed. */ - scic_sds_remote_node_context_suspend(&idev->rnc, + sci_remote_node_context_suspend(&idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); - scic_sds_remote_node_context_resume(&idev->rnc, - scic_sds_remote_device_continue_request, + sci_remote_node_context_resume(&idev->rnc, + sci_remote_device_continue_request, idev); out: - scic_sds_remote_device_start_request(idev, ireq, status); + sci_remote_device_start_request(idev, ireq, status); /* We need to let the controller start request handler know that * it can't post TC yet. We will provide a callback function to * post TC when RNC gets resumed. */ return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; case SCI_DEV_READY: - status = scic_sds_port_start_io(iport, idev, ireq); + status = sci_port_start_io(iport, idev, ireq); if (status != SCI_SUCCESS) return status; - status = scic_sds_remote_node_context_start_task(&idev->rnc, ireq); + status = sci_remote_node_context_start_task(&idev->rnc, ireq); if (status != SCI_SUCCESS) break; - status = scic_sds_request_start(ireq); + status = sci_request_start(ireq); break; } - scic_sds_remote_device_start_request(idev, ireq, status); + sci_remote_device_start_request(idev, ireq, status); return status; } @@ -769,16 +769,16 @@ enum sci_status scic_sds_remote_device_start_task(struct isci_host *ihost, * This method takes the request and bulids an appropriate SCU context for the * request and then requests the controller to post the request. none */ -void scic_sds_remote_device_post_request( +void sci_remote_device_post_request( struct isci_remote_device *idev, u32 request) { u32 context; - context = scic_sds_remote_device_build_command_context(idev, request); + context = sci_remote_device_build_command_context(idev, request); - scic_sds_controller_post_request( - scic_sds_remote_device_get_controller(idev), + sci_controller_post_request( + sci_remote_device_get_controller(idev), context ); } @@ -798,7 +798,7 @@ static void remote_device_resume_done(void *_dev) sci_change_state(&idev->sm, SCI_DEV_READY); } -static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) +static void sci_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) { struct isci_remote_device *idev = _dev; struct isci_host *ihost = idev->owning_port->owning_controller; @@ -810,7 +810,7 @@ static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handl isci_remote_device_ready(ihost, idev); } -static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_device_initial_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); @@ -819,7 +819,7 @@ static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_mac } /** - * scic_remote_device_destruct() - free remote node context and destruct + * sci_remote_device_destruct() - free remote node context and destruct * @remote_device: This parameter specifies the remote device to be destructed. * * Remote device objects are a limited resource. As such, they must be @@ -831,10 +831,10 @@ static void scic_sds_remote_device_initial_state_enter(struct sci_base_state_mac * device isn't valid (e.g. it's already been destoryed, the handle isn't * valid, etc.). */ -static enum sci_status scic_remote_device_destruct(struct isci_remote_device *idev) +static enum sci_status sci_remote_device_destruct(struct isci_remote_device *idev) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; struct isci_host *ihost; if (state != SCI_DEV_STOPPED) { @@ -844,7 +844,7 @@ static enum sci_status scic_remote_device_destruct(struct isci_remote_device *id } ihost = idev->owning_port->owning_controller; - scic_sds_controller_free_remote_node_context(ihost, idev, + sci_controller_free_remote_node_context(ihost, idev, idev->rnc.remote_node_index); idev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; sci_change_state(sm, SCI_DEV_FINAL); @@ -869,12 +869,12 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ * io requests in process */ BUG_ON(!list_empty(&idev->reqs_in_process)); - scic_remote_device_destruct(idev); + sci_remote_device_destruct(idev); list_del_init(&idev->node); isci_put_device(idev); } -static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); struct isci_host *ihost = idev->owning_port->owning_controller; @@ -887,19 +887,19 @@ static void scic_sds_remote_device_stopped_state_enter(struct sci_base_state_mac if (prev_state == SCI_DEV_STOPPING) isci_remote_device_deconstruct(ihost, idev); - scic_sds_controller_remote_device_stopped(ihost, idev); + sci_controller_remote_device_stopped(ihost, idev); } -static void scic_sds_remote_device_starting_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_device_starting_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = sci_remote_device_get_controller(idev); isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); } -static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); struct isci_host *ihost = idev->owning_port->owning_controller; @@ -913,7 +913,7 @@ static void scic_sds_remote_device_ready_state_enter(struct sci_base_state_machi isci_remote_device_ready(ihost, idev); } -static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machine *sm) +static void sci_remote_device_ready_state_exit(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); struct domain_device *dev = idev->domain_dev; @@ -926,42 +926,42 @@ static void scic_sds_remote_device_ready_state_exit(struct sci_base_state_machin } } -static void scic_sds_remote_device_resetting_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_device_resetting_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - scic_sds_remote_node_context_suspend( + sci_remote_node_context_suspend( &idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); } -static void scic_sds_remote_device_resetting_state_exit(struct sci_base_state_machine *sm) +static void sci_remote_device_resetting_state_exit(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - scic_sds_remote_node_context_resume(&idev->rnc, NULL, NULL); + sci_remote_node_context_resume(&idev->rnc, NULL, NULL); } -static void scic_sds_stp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) +static void sci_stp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); idev->working_request = NULL; - if (scic_sds_remote_node_context_is_ready(&idev->rnc)) { + if (sci_remote_node_context_is_ready(&idev->rnc)) { /* * Since the RNC is ready, it's alright to finish completion * processing (e.g. signal the remote device is ready). */ - scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(idev); + sci_stp_remote_device_ready_idle_substate_resume_complete_handler(idev); } else { - scic_sds_remote_node_context_resume(&idev->rnc, - scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler, + sci_remote_node_context_resume(&idev->rnc, + sci_stp_remote_device_ready_idle_substate_resume_complete_handler, idev); } } -static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) +static void sci_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = sci_remote_device_get_controller(idev); BUG_ON(idev->working_request == NULL); @@ -969,28 +969,28 @@ static void scic_sds_stp_remote_device_ready_cmd_substate_enter(struct sci_base_ SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); } -static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) +static void sci_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = sci_remote_device_get_controller(idev); if (idev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) isci_remote_device_not_ready(ihost, idev, idev->not_ready_reason); } -static void scic_sds_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) +static void sci_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = sci_remote_device_get_controller(idev); isci_remote_device_ready(ihost, idev); } -static void scic_sds_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) +static void sci_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = scic_sds_remote_device_get_controller(idev); + struct isci_host *ihost = sci_remote_device_get_controller(idev); BUG_ON(idev->working_request == NULL); @@ -998,83 +998,83 @@ static void scic_sds_smp_remote_device_ready_cmd_substate_enter(struct sci_base_ SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); } -static void scic_sds_smp_remote_device_ready_cmd_substate_exit(struct sci_base_state_machine *sm) +static void sci_smp_remote_device_ready_cmd_substate_exit(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); idev->working_request = NULL; } -static const struct sci_base_state scic_sds_remote_device_state_table[] = { +static const struct sci_base_state sci_remote_device_state_table[] = { [SCI_DEV_INITIAL] = { - .enter_state = scic_sds_remote_device_initial_state_enter, + .enter_state = sci_remote_device_initial_state_enter, }, [SCI_DEV_STOPPED] = { - .enter_state = scic_sds_remote_device_stopped_state_enter, + .enter_state = sci_remote_device_stopped_state_enter, }, [SCI_DEV_STARTING] = { - .enter_state = scic_sds_remote_device_starting_state_enter, + .enter_state = sci_remote_device_starting_state_enter, }, [SCI_DEV_READY] = { - .enter_state = scic_sds_remote_device_ready_state_enter, - .exit_state = scic_sds_remote_device_ready_state_exit + .enter_state = sci_remote_device_ready_state_enter, + .exit_state = sci_remote_device_ready_state_exit }, [SCI_STP_DEV_IDLE] = { - .enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter, + .enter_state = sci_stp_remote_device_ready_idle_substate_enter, }, [SCI_STP_DEV_CMD] = { - .enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter, + .enter_state = sci_stp_remote_device_ready_cmd_substate_enter, }, [SCI_STP_DEV_NCQ] = { }, [SCI_STP_DEV_NCQ_ERROR] = { - .enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter, + .enter_state = sci_stp_remote_device_ready_ncq_error_substate_enter, }, [SCI_STP_DEV_AWAIT_RESET] = { }, [SCI_SMP_DEV_IDLE] = { - .enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter, + .enter_state = sci_smp_remote_device_ready_idle_substate_enter, }, [SCI_SMP_DEV_CMD] = { - .enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter, - .exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit, + .enter_state = sci_smp_remote_device_ready_cmd_substate_enter, + .exit_state = sci_smp_remote_device_ready_cmd_substate_exit, }, [SCI_DEV_STOPPING] = { }, [SCI_DEV_FAILED] = { }, [SCI_DEV_RESETTING] = { - .enter_state = scic_sds_remote_device_resetting_state_enter, - .exit_state = scic_sds_remote_device_resetting_state_exit + .enter_state = sci_remote_device_resetting_state_enter, + .exit_state = sci_remote_device_resetting_state_exit }, [SCI_DEV_FINAL] = { }, }; /** - * scic_remote_device_construct() - common construction + * sci_remote_device_construct() - common construction * @sci_port: SAS/SATA port through which this device is accessed. * @sci_dev: remote device to construct * * This routine just performs benign initialization and does not * allocate the remote_node_context which is left to - * scic_remote_device_[de]a_construct(). scic_remote_device_destruct() + * sci_remote_device_[de]a_construct(). sci_remote_device_destruct() * frees the remote_node_context(s) for the device. */ -static void scic_remote_device_construct(struct isci_port *iport, +static void sci_remote_device_construct(struct isci_port *iport, struct isci_remote_device *idev) { idev->owning_port = iport; idev->started_request_count = 0; - sci_init_sm(&idev->sm, scic_sds_remote_device_state_table, SCI_DEV_INITIAL); + sci_init_sm(&idev->sm, sci_remote_device_state_table, SCI_DEV_INITIAL); - scic_sds_remote_node_context_construct(&idev->rnc, + sci_remote_node_context_construct(&idev->rnc, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); } /** - * scic_remote_device_da_construct() - construct direct attached device. + * sci_remote_device_da_construct() - construct direct attached device. * * The information (e.g. IAF, Signature FIS, etc.) necessary to build * the device is known to the SCI Core since it is contained in the - * scic_phy object. Remote node context(s) is/are a global resource - * allocated by this routine, freed by scic_remote_device_destruct(). + * sci_phy object. Remote node context(s) is/are a global resource + * allocated by this routine, freed by sci_remote_device_destruct(). * * Returns: * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. @@ -1082,20 +1082,20 @@ static void scic_remote_device_construct(struct isci_port *iport, * sata-only controller instance. * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ -static enum sci_status scic_remote_device_da_construct(struct isci_port *iport, +static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, struct isci_remote_device *idev) { enum sci_status status; struct domain_device *dev = idev->domain_dev; - scic_remote_device_construct(iport, idev); + sci_remote_device_construct(iport, idev); /* * This information is request to determine how many remote node context * entries will be needed to store the remote node. */ idev->is_direct_attached = true; - status = scic_sds_controller_allocate_remote_node_context(iport->owning_controller, + status = sci_controller_allocate_remote_node_context(iport->owning_controller, idev, &idev->rnc.remote_node_index); @@ -1108,7 +1108,7 @@ static enum sci_status scic_remote_device_da_construct(struct isci_port *iport, else return SCI_FAILURE_UNSUPPORTED_PROTOCOL; - idev->connection_rate = scic_sds_port_get_max_allowed_speed(iport); + idev->connection_rate = sci_port_get_max_allowed_speed(iport); /* / @todo Should I assign the port width by reading all of the phys on the port? */ idev->device_port_width = 1; @@ -1117,10 +1117,10 @@ static enum sci_status scic_remote_device_da_construct(struct isci_port *iport, } /** - * scic_remote_device_ea_construct() - construct expander attached device + * sci_remote_device_ea_construct() - construct expander attached device * * Remote node context(s) is/are a global resource allocated by this - * routine, freed by scic_remote_device_destruct(). + * routine, freed by sci_remote_device_destruct(). * * Returns: * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. @@ -1128,15 +1128,15 @@ static enum sci_status scic_remote_device_da_construct(struct isci_port *iport, * sata-only controller instance. * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. */ -static enum sci_status scic_remote_device_ea_construct(struct isci_port *iport, +static enum sci_status sci_remote_device_ea_construct(struct isci_port *iport, struct isci_remote_device *idev) { struct domain_device *dev = idev->domain_dev; enum sci_status status; - scic_remote_device_construct(iport, idev); + sci_remote_device_construct(iport, idev); - status = scic_sds_controller_allocate_remote_node_context(iport->owning_controller, + status = sci_controller_allocate_remote_node_context(iport->owning_controller, idev, &idev->rnc.remote_node_index); if (status != SCI_SUCCESS) @@ -1155,7 +1155,7 @@ static enum sci_status scic_remote_device_ea_construct(struct isci_port *iport, * connection the logical link rate is that same as the * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay * one another, so this code works for both situations. */ - idev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(iport), + idev->connection_rate = min_t(u16, sci_port_get_max_allowed_speed(iport), dev->linkrate); /* / @todo Should I assign the port width by reading all of the phys on the port? */ @@ -1165,7 +1165,7 @@ static enum sci_status scic_remote_device_ea_construct(struct isci_port *iport, } /** - * scic_remote_device_start() - This method will start the supplied remote + * sci_remote_device_start() - This method will start the supplied remote * device. This method enables normal IO requests to flow through to the * remote device. * @remote_device: This parameter specifies the device to be started. @@ -1177,11 +1177,11 @@ static enum sci_status scic_remote_device_ea_construct(struct isci_port *iport, * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start * the device when there have been no phys added to it. */ -static enum sci_status scic_remote_device_start(struct isci_remote_device *idev, +static enum sci_status sci_remote_device_start(struct isci_remote_device *idev, u32 timeout) { struct sci_base_state_machine *sm = &idev->sm; - enum scic_sds_remote_device_states state = sm->current_state_id; + enum sci_remote_device_states state = sm->current_state_id; enum sci_status status; if (state != SCI_DEV_STOPPED) { @@ -1190,7 +1190,7 @@ static enum sci_status scic_remote_device_start(struct isci_remote_device *idev, return SCI_FAILURE_INVALID_STATE; } - status = scic_sds_remote_node_context_resume(&idev->rnc, + status = sci_remote_node_context_resume(&idev->rnc, remote_device_resume_done, idev); if (status != SCI_SUCCESS) @@ -1209,9 +1209,9 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport, enum sci_status status; if (dev->parent && dev_is_expander(dev->parent)) - status = scic_remote_device_ea_construct(iport, idev); + status = sci_remote_device_ea_construct(iport, idev); else - status = scic_remote_device_da_construct(iport, idev); + status = sci_remote_device_da_construct(iport, idev); if (status != SCI_SUCCESS) { dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n", @@ -1221,7 +1221,7 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport, } /* start the device. */ - status = scic_remote_device_start(idev, ISCI_REMOTE_DEVICE_START_TIMEOUT); + status = sci_remote_device_start(idev, ISCI_REMOTE_DEVICE_START_TIMEOUT); if (status != SCI_SUCCESS) dev_warn(&ihost->pdev->dev, "remote device start failed: %d\n", @@ -1322,7 +1322,7 @@ enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_rem set_bit(IDEV_STOP_PENDING, &idev->flags); spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_stop(idev, 50); + status = sci_remote_device_stop(idev, 50); spin_unlock_irqrestore(&ihost->scic_lock, flags); /* Wait for the stop complete callback. */ diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index bc4da20..fa9a0e6 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -61,7 +61,7 @@ #include "remote_node_context.h" #include "port.h" -enum scic_remote_device_not_ready_reason_code { +enum sci_remote_device_not_ready_reason_code { SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, @@ -97,7 +97,7 @@ struct isci_remote_device { enum sas_linkrate connection_rate; bool is_direct_attached; struct isci_port *owning_port; - struct scic_sds_remote_node_context rnc; + struct sci_remote_node_context rnc; /* XXX unify with device reference counting and delete */ u32 started_request_count; struct isci_request *working_request; @@ -106,7 +106,7 @@ struct isci_remote_device { #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 -/* device reference routines must be called under scic_lock */ +/* device reference routines must be called under sci_lock */ static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev) { struct isci_remote_device *idev = dev->lldd_dev; @@ -137,7 +137,7 @@ bool isci_device_is_reset_pending(struct isci_host *ihost, void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev); /** - * scic_remote_device_stop() - This method will stop both transmission and + * sci_remote_device_stop() - This method will stop both transmission and * reception of link activity for the supplied remote device. This method * disables normal IO requests from flowing through to the remote device. * @remote_device: This parameter specifies the device to be stopped. @@ -148,12 +148,12 @@ void isci_device_clear_reset_pending(struct isci_host *ihost, * This value is returned if the transmission and reception for the device was * successfully stopped. */ -enum sci_status scic_remote_device_stop( +enum sci_status sci_remote_device_stop( struct isci_remote_device *idev, u32 timeout); /** - * scic_remote_device_reset() - This method will reset the device making it + * sci_remote_device_reset() - This method will reset the device making it * ready for operation. This method must be called anytime the device is * reset either through a SMP phy control or a port hard reset request. * @remote_device: This parameter specifies the device to be reset. @@ -164,11 +164,11 @@ enum sci_status scic_remote_device_stop( * was accepted. SCI_SUCCESS This value is returned if the device reset is * started. */ -enum sci_status scic_remote_device_reset( +enum sci_status sci_remote_device_reset( struct isci_remote_device *idev); /** - * scic_remote_device_reset_complete() - This method informs the device object + * sci_remote_device_reset_complete() - This method informs the device object * that the reset operation is complete and the device can resume operation * again. * @remote_device: This parameter specifies the device which is to be informed @@ -177,18 +177,16 @@ enum sci_status scic_remote_device_reset( * An indication that the device is resuming operation. SCI_SUCCESS the device * is resuming operation. */ -enum sci_status scic_remote_device_reset_complete( +enum sci_status sci_remote_device_reset_complete( struct isci_remote_device *idev); -#define scic_remote_device_is_atapi(device_handle) false - /** - * enum scic_sds_remote_device_states - This enumeration depicts all the states + * enum sci_remote_device_states - This enumeration depicts all the states * for the common remote device state machine. * * */ -enum scic_sds_remote_device_states { +enum sci_remote_device_states { /** * Simply the initial state for the base remote device state machine. */ @@ -293,7 +291,7 @@ enum scic_sds_remote_device_states { SCI_DEV_FINAL, }; -static inline struct isci_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) +static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc) { struct isci_remote_device *idev; @@ -308,122 +306,120 @@ static inline bool dev_is_expander(struct domain_device *dev) } /** - * scic_sds_remote_device_increment_request_count() - + * sci_remote_device_increment_request_count() - * * This macro incrments the request count for this device */ -#define scic_sds_remote_device_increment_request_count(idev) \ +#define sci_remote_device_increment_request_count(idev) \ ((idev)->started_request_count++) /** - * scic_sds_remote_device_decrement_request_count() - + * sci_remote_device_decrement_request_count() - * * This macro decrements the request count for this device. This count will * never decrment past 0. */ -#define scic_sds_remote_device_decrement_request_count(idev) \ +#define sci_remote_device_decrement_request_count(idev) \ ((idev)->started_request_count > 0 ? \ (idev)->started_request_count-- : 0) /** - * scic_sds_remote_device_get_request_count() - + * sci_remote_device_get_request_count() - * * This is a helper macro to return the current device request count. */ -#define scic_sds_remote_device_get_request_count(idev) \ +#define sci_remote_device_get_request_count(idev) \ ((idev)->started_request_count) /** - * scic_sds_remote_device_get_controller() - + * sci_remote_device_get_controller() - * * This macro returns the controller object that contains this device object */ -#define scic_sds_remote_device_get_controller(idev) \ - scic_sds_port_get_controller(scic_sds_remote_device_get_port(idev)) +#define sci_remote_device_get_controller(idev) \ + sci_port_get_controller(sci_remote_device_get_port(idev)) /** - * scic_sds_remote_device_get_port() - + * sci_remote_device_get_port() - * * This macro returns the owning port of this device */ -#define scic_sds_remote_device_get_port(idev) \ +#define sci_remote_device_get_port(idev) \ ((idev)->owning_port) /** - * scic_sds_remote_device_get_controller_peg() - + * sci_remote_device_get_controller_peg() - * * This macro returns the controllers protocol engine group */ -#define scic_sds_remote_device_get_controller_peg(idev) \ +#define sci_remote_device_get_controller_peg(idev) \ (\ - scic_sds_controller_get_protocol_engine_group(\ - scic_sds_port_get_controller(\ - scic_sds_remote_device_get_port(idev) \ + sci_controller_get_protocol_engine_group(\ + sci_port_get_controller(\ + sci_remote_device_get_port(idev) \ ) \ ) \ ) /** - * scic_sds_remote_device_get_index() - + * sci_remote_device_get_index() - * * This macro returns the remote node index for this device object */ -#define scic_sds_remote_device_get_index(idev) \ +#define sci_remote_device_get_index(idev) \ ((idev)->rnc.remote_node_index) /** - * scic_sds_remote_device_build_command_context() - + * sci_remote_device_build_command_context() - * * This macro builds a remote device context for the SCU post request operation */ -#define scic_sds_remote_device_build_command_context(device, command) \ +#define sci_remote_device_build_command_context(device, command) \ ((command) \ - | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ + | (sci_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ | ((device)->owning_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ - | (scic_sds_remote_device_get_index((device))) \ + | (sci_remote_device_get_index((device))) \ ) /** - * scic_sds_remote_device_set_working_request() - + * sci_remote_device_set_working_request() - * * This macro makes the working request assingment for the remote device * object. To clear the working request use this macro with a NULL request * object. */ -#define scic_sds_remote_device_set_working_request(device, request) \ +#define sci_remote_device_set_working_request(device, request) \ ((device)->working_request = (request)) -enum sci_status scic_sds_remote_device_frame_handler( +enum sci_status sci_remote_device_frame_handler( struct isci_remote_device *idev, u32 frame_index); -enum sci_status scic_sds_remote_device_event_handler( +enum sci_status sci_remote_device_event_handler( struct isci_remote_device *idev, u32 event_code); -enum sci_status scic_sds_remote_device_start_io( +enum sci_status sci_remote_device_start_io( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); -enum sci_status scic_sds_remote_device_start_task( +enum sci_status sci_remote_device_start_task( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); -enum sci_status scic_sds_remote_device_complete_io( +enum sci_status sci_remote_device_complete_io( struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq); -enum sci_status scic_sds_remote_device_suspend( +enum sci_status sci_remote_device_suspend( struct isci_remote_device *idev, u32 suspend_type); -void scic_sds_remote_device_post_request( +void sci_remote_device_post_request( struct isci_remote_device *idev, u32 request); -#define scic_sds_remote_device_is_atapi(idev) false - #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 8a5203b..c2dfd5a 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -81,8 +81,8 @@ * otherwise it will return false bool true if the remote node context is in * the ready state. false if the remote node context is not in the ready state. */ -bool scic_sds_remote_node_context_is_ready( - struct scic_sds_remote_node_context *sci_rnc) +bool sci_remote_node_context_is_ready( + struct sci_remote_node_context *sci_rnc) { u32 current_state = sci_rnc->sm.current_state_id; @@ -93,15 +93,16 @@ bool scic_sds_remote_node_context_is_ready( return false; } -/** - * - * @sci_dev: The remote device to use to construct the RNC buffer. - * @rnc: The buffer into which the remote device data will be copied. - * - * This method will construct the RNC buffer for this remote device object. none - */ -static void scic_sds_remote_node_context_construct_buffer( - struct scic_sds_remote_node_context *sci_rnc) +static union scu_remote_node_context *sci_rnc_by_id(struct isci_host *ihost, u16 id) +{ + if (id < ihost->remote_node_entries && + ihost->device_table[id]) + return &ihost->remote_node_context_table[id]; + + return NULL; +} + +static void sci_remote_node_context_construct_buffer(struct sci_remote_node_context *sci_rnc) { struct isci_remote_device *idev = rnc_to_dev(sci_rnc); struct domain_device *dev = idev->domain_dev; @@ -110,11 +111,11 @@ static void scic_sds_remote_node_context_construct_buffer( struct isci_host *ihost; __le64 sas_addr; - ihost = scic_sds_remote_device_get_controller(idev); - rnc = scic_sds_controller_get_remote_node_context_buffer(ihost, rni); + ihost = sci_remote_device_get_controller(idev); + rnc = sci_rnc_by_id(ihost, rni); memset(rnc, 0, sizeof(union scu_remote_node_context) - * scic_sds_remote_device_node_count(idev)); + * sci_remote_device_node_count(idev)); rnc->ssp.remote_node_index = rni; rnc->ssp.remote_node_port_width = idev->device_port_width; @@ -135,14 +136,14 @@ static void scic_sds_remote_node_context_construct_buffer( if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { rnc->ssp.connection_occupancy_timeout = - ihost->user_parameters.sds1.stp_max_occupancy_timeout; + ihost->user_parameters.stp_max_occupancy_timeout; rnc->ssp.connection_inactivity_timeout = - ihost->user_parameters.sds1.stp_inactivity_timeout; + ihost->user_parameters.stp_inactivity_timeout; } else { rnc->ssp.connection_occupancy_timeout = - ihost->user_parameters.sds1.ssp_max_occupancy_timeout; + ihost->user_parameters.ssp_max_occupancy_timeout; rnc->ssp.connection_inactivity_timeout = - ihost->user_parameters.sds1.ssp_inactivity_timeout; + ihost->user_parameters.ssp_inactivity_timeout; } rnc->ssp.initial_arbitration_wait_time = 0; @@ -164,8 +165,8 @@ static void scic_sds_remote_node_context_construct_buffer( * to its ready state. If the remote node context is already setup to * transition to its final state then this function does nothing. none */ -static void scic_sds_remote_node_context_setup_to_resume( - struct scic_sds_remote_node_context *sci_rnc, +static void sci_remote_node_context_setup_to_resume( + struct sci_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, void *callback_parameter) { @@ -176,8 +177,8 @@ static void scic_sds_remote_node_context_setup_to_resume( } } -static void scic_sds_remote_node_context_setup_to_destory( - struct scic_sds_remote_node_context *sci_rnc, +static void sci_remote_node_context_setup_to_destory( + struct sci_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, void *callback_parameter) { @@ -192,8 +193,8 @@ static void scic_sds_remote_node_context_setup_to_destory( * This method just calls the user callback function and then resets the * callback. */ -static void scic_sds_remote_node_context_notify_user( - struct scic_sds_remote_node_context *rnc) +static void sci_remote_node_context_notify_user( + struct sci_remote_node_context *rnc) { if (rnc->user_callback != NULL) { (*rnc->user_callback)(rnc->user_cookie); @@ -203,99 +204,80 @@ static void scic_sds_remote_node_context_notify_user( } } -static void scic_sds_remote_node_context_continue_state_transitions(struct scic_sds_remote_node_context *rnc) +static void sci_remote_node_context_continue_state_transitions(struct sci_remote_node_context *rnc) { if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) - scic_sds_remote_node_context_resume(rnc, rnc->user_callback, + sci_remote_node_context_resume(rnc, rnc->user_callback, rnc->user_cookie); } -/** - * - * @sci_rnc: The remote node context object that is to be validated. - * - * This method will mark the rnc buffer as being valid and post the request to - * the hardware. none - */ -static void scic_sds_remote_node_context_validate_context_buffer( - struct scic_sds_remote_node_context *sci_rnc) +static void sci_remote_node_context_validate_context_buffer(struct sci_remote_node_context *sci_rnc) { + union scu_remote_node_context *rnc_buffer; struct isci_remote_device *idev = rnc_to_dev(sci_rnc); struct domain_device *dev = idev->domain_dev; - union scu_remote_node_context *rnc_buffer; + struct isci_host *ihost = idev->owning_port->owning_controller; - rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(idev), - sci_rnc->remote_node_index - ); + rnc_buffer = sci_rnc_by_id(ihost, sci_rnc->remote_node_index); rnc_buffer->ssp.is_valid = true; if (!idev->is_direct_attached && (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) { - scic_sds_remote_device_post_request(idev, - SCU_CONTEXT_COMMAND_POST_RNC_96); + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_96); } else { - scic_sds_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_32); + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_32); - if (idev->is_direct_attached) { - scic_sds_port_setup_transports(idev->owning_port, - sci_rnc->remote_node_index); - } + if (idev->is_direct_attached) + sci_port_setup_transports(idev->owning_port, + sci_rnc->remote_node_index); } } -/** - * - * @sci_rnc: The remote node context object that is to be invalidated. - * - * This method will update the RNC buffer and post the invalidate request. none - */ -static void scic_sds_remote_node_context_invalidate_context_buffer( - struct scic_sds_remote_node_context *sci_rnc) +static void sci_remote_node_context_invalidate_context_buffer(struct sci_remote_node_context *sci_rnc) { union scu_remote_node_context *rnc_buffer; + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct isci_host *ihost = idev->owning_port->owning_controller; - rnc_buffer = scic_sds_controller_get_remote_node_context_buffer( - scic_sds_remote_device_get_controller(rnc_to_dev(sci_rnc)), - sci_rnc->remote_node_index); + rnc_buffer = sci_rnc_by_id(ihost, sci_rnc->remote_node_index); rnc_buffer->ssp.is_valid = false; - scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), - SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); + sci_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); } -static void scic_sds_remote_node_context_initial_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_node_context_initial_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); /* Check to see if we have gotten back to the initial state because * someone requested to destroy the remote node context object. */ if (sm->previous_state_id == SCI_RNC_INVALIDATING) { rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - scic_sds_remote_node_context_notify_user(rnc); + sci_remote_node_context_notify_user(rnc); } } -static void scic_sds_remote_node_context_posting_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_node_context_posting_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *sci_rnc = container_of(sm, typeof(*sci_rnc), sm); + struct sci_remote_node_context *sci_rnc = container_of(sm, typeof(*sci_rnc), sm); - scic_sds_remote_node_context_validate_context_buffer(sci_rnc); + sci_remote_node_context_validate_context_buffer(sci_rnc); } -static void scic_sds_remote_node_context_invalidating_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_node_context_invalidating_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); - scic_sds_remote_node_context_invalidate_context_buffer(rnc); + sci_remote_node_context_invalidate_context_buffer(rnc); } -static void scic_sds_remote_node_context_resuming_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_node_context_resuming_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); struct isci_remote_device *idev; struct domain_device *dev; @@ -310,73 +292,73 @@ static void scic_sds_remote_node_context_resuming_state_enter(struct sci_base_st */ if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && idev->is_direct_attached) - scic_sds_port_setup_transports(idev->owning_port, + sci_port_setup_transports(idev->owning_port, rnc->remote_node_index); - scic_sds_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); } -static void scic_sds_remote_node_context_ready_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_node_context_ready_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; if (rnc->user_callback) - scic_sds_remote_node_context_notify_user(rnc); + sci_remote_node_context_notify_user(rnc); } -static void scic_sds_remote_node_context_tx_suspended_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_node_context_tx_suspended_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); - scic_sds_remote_node_context_continue_state_transitions(rnc); + sci_remote_node_context_continue_state_transitions(rnc); } -static void scic_sds_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_state_machine *sm) +static void sci_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_state_machine *sm) { - struct scic_sds_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); - scic_sds_remote_node_context_continue_state_transitions(rnc); + sci_remote_node_context_continue_state_transitions(rnc); } -static const struct sci_base_state scic_sds_remote_node_context_state_table[] = { +static const struct sci_base_state sci_remote_node_context_state_table[] = { [SCI_RNC_INITIAL] = { - .enter_state = scic_sds_remote_node_context_initial_state_enter, + .enter_state = sci_remote_node_context_initial_state_enter, }, [SCI_RNC_POSTING] = { - .enter_state = scic_sds_remote_node_context_posting_state_enter, + .enter_state = sci_remote_node_context_posting_state_enter, }, [SCI_RNC_INVALIDATING] = { - .enter_state = scic_sds_remote_node_context_invalidating_state_enter, + .enter_state = sci_remote_node_context_invalidating_state_enter, }, [SCI_RNC_RESUMING] = { - .enter_state = scic_sds_remote_node_context_resuming_state_enter, + .enter_state = sci_remote_node_context_resuming_state_enter, }, [SCI_RNC_READY] = { - .enter_state = scic_sds_remote_node_context_ready_state_enter, + .enter_state = sci_remote_node_context_ready_state_enter, }, [SCI_RNC_TX_SUSPENDED] = { - .enter_state = scic_sds_remote_node_context_tx_suspended_state_enter, + .enter_state = sci_remote_node_context_tx_suspended_state_enter, }, [SCI_RNC_TX_RX_SUSPENDED] = { - .enter_state = scic_sds_remote_node_context_tx_rx_suspended_state_enter, + .enter_state = sci_remote_node_context_tx_rx_suspended_state_enter, }, [SCI_RNC_AWAIT_SUSPENSION] = { }, }; -void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, +void sci_remote_node_context_construct(struct sci_remote_node_context *rnc, u16 remote_node_index) { - memset(rnc, 0, sizeof(struct scic_sds_remote_node_context)); + memset(rnc, 0, sizeof(struct sci_remote_node_context)); rnc->remote_node_index = remote_node_index; rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; - sci_init_sm(&rnc->sm, scic_sds_remote_node_context_state_table, SCI_RNC_INITIAL); + sci_init_sm(&rnc->sm, sci_remote_node_context_state_table, SCI_RNC_INITIAL); } -enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc, u32 event_code) { enum scis_sds_remote_node_context_states state; @@ -476,7 +458,7 @@ enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remot } -enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback cb_fn, void *cb_p) { @@ -485,7 +467,7 @@ enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_nod state = sci_rnc->sm.current_state_id; switch (state) { case SCI_RNC_INVALIDATING: - scic_sds_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); + sci_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); return SCI_SUCCESS; case SCI_RNC_POSTING: case SCI_RNC_RESUMING: @@ -493,7 +475,7 @@ enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_nod case SCI_RNC_TX_SUSPENDED: case SCI_RNC_TX_RX_SUSPENDED: case SCI_RNC_AWAIT_SUSPENSION: - scic_sds_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); + sci_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING); return SCI_SUCCESS; case SCI_RNC_INITIAL: @@ -511,7 +493,7 @@ enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_nod } } -enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_suspend(struct sci_remote_node_context *sci_rnc, u32 suspend_type, scics_sds_remote_node_context_callback cb_fn, void *cb_p) @@ -530,7 +512,7 @@ enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node sci_rnc->suspension_code = suspend_type; if (suspend_type == SCI_SOFTWARE_SUSPENSION) { - scic_sds_remote_device_post_request(rnc_to_dev(sci_rnc), + sci_remote_device_post_request(rnc_to_dev(sci_rnc), SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); } @@ -538,7 +520,7 @@ enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node return SCI_SUCCESS; } -enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback cb_fn, void *cb_p) { @@ -550,8 +532,8 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ if (sci_rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_STATE; - scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); - scic_sds_remote_node_context_construct_buffer(sci_rnc); + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_remote_node_context_construct_buffer(sci_rnc); sci_change_state(&sci_rnc->sm, SCI_RNC_POSTING); return SCI_SUCCESS; case SCI_RNC_POSTING: @@ -567,7 +549,7 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ struct isci_remote_device *idev = rnc_to_dev(sci_rnc); struct domain_device *dev = idev->domain_dev; - scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) @@ -584,11 +566,11 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ return SCI_SUCCESS; } case SCI_RNC_TX_RX_SUSPENDED: - scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); return SCI_FAILURE_INVALID_STATE; case SCI_RNC_AWAIT_SUSPENSION: - scic_sds_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); return SCI_SUCCESS; default: dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), @@ -597,7 +579,7 @@ enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_ } } -enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc, struct isci_request *ireq) { enum scis_sds_remote_node_context_states state; @@ -622,7 +604,7 @@ enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_nod return SCI_FAILURE_INVALID_STATE; } -enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc, struct isci_request *ireq) { enum scis_sds_remote_node_context_states state; @@ -635,7 +617,7 @@ enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_n return SCI_SUCCESS; case SCI_RNC_TX_SUSPENDED: case SCI_RNC_TX_RX_SUSPENDED: - scic_sds_remote_node_context_resume(sci_rnc, NULL, NULL); + sci_remote_node_context_resume(sci_rnc, NULL, NULL); return SCI_SUCCESS; default: dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index 7a24c7a..b475c5c 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -80,7 +80,7 @@ struct isci_request; struct isci_remote_device; -struct scic_sds_remote_node_context; +struct sci_remote_node_context; typedef void (*scics_sds_remote_node_context_callback)(void *); @@ -147,19 +147,19 @@ enum scis_sds_remote_node_context_states { * This enumeration is used to define the end destination state for the remote * node context. */ -enum scic_sds_remote_node_context_destination_state { +enum sci_remote_node_context_destination_state { SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED, SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY, SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL }; /** - * struct scic_sds_remote_node_context - This structure contains the data + * struct sci_remote_node_context - This structure contains the data * associated with the remote node context object. The remote node context * (RNC) object models the the remote device information necessary to manage * the silicon RNC. */ -struct scic_sds_remote_node_context { +struct sci_remote_node_context { /** * This field indicates the remote node index (RNI) associated with * this RNC. @@ -177,7 +177,7 @@ struct scic_sds_remote_node_context { * state. This can cause an automatic resume on receiving a suspension * notification. */ - enum scic_sds_remote_node_context_destination_state destination_state; + enum sci_remote_node_context_destination_state destination_state; /** * This field contains the callback function that the user requested to be @@ -197,31 +197,31 @@ struct scic_sds_remote_node_context { struct sci_base_state_machine sm; }; -void scic_sds_remote_node_context_construct(struct scic_sds_remote_node_context *rnc, +void sci_remote_node_context_construct(struct sci_remote_node_context *rnc, u16 remote_node_index); -bool scic_sds_remote_node_context_is_ready( - struct scic_sds_remote_node_context *sci_rnc); +bool sci_remote_node_context_is_ready( + struct sci_remote_node_context *sci_rnc); -#define scic_sds_remote_node_context_get_remote_node_index(rcn) \ +#define sci_remote_node_context_get_remote_node_index(rcn) \ ((rnc)->remote_node_index) -enum sci_status scic_sds_remote_node_context_event_handler(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc, u32 event_code); -enum sci_status scic_sds_remote_node_context_destruct(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback callback, void *callback_parameter); -enum sci_status scic_sds_remote_node_context_suspend(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_suspend(struct sci_remote_node_context *sci_rnc, u32 suspend_type, scics_sds_remote_node_context_callback cb_fn, void *cb_p); -enum sci_status scic_sds_remote_node_context_resume(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *sci_rnc, scics_sds_remote_node_context_callback cb_fn, void *cb_p); -enum sci_status scic_sds_remote_node_context_start_task(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc, struct isci_request *ireq); -enum sci_status scic_sds_remote_node_context_start_io(struct scic_sds_remote_node_context *sci_rnc, +enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc, struct isci_request *ireq); #endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c index 6b9465a..301b314 100644 --- a/drivers/scsi/isci/remote_node_table.c +++ b/drivers/scsi/isci/remote_node_table.c @@ -74,8 +74,8 @@ * just bit position. u32 This is the absolute bit position for an available * group. */ -static u32 scic_sds_remote_node_table_get_group_index( - struct scic_remote_node_table *remote_node_table, +static u32 sci_remote_node_table_get_group_index( + struct sci_remote_node_table *remote_node_table, u32 group_table_index) { u32 dword_index; @@ -108,8 +108,8 @@ static u32 scic_sds_remote_node_table_get_group_index( * This method will clear the group index entry in the specified group index * table. none */ -static void scic_sds_remote_node_table_clear_group_index( - struct scic_remote_node_table *remote_node_table, +static void sci_remote_node_table_clear_group_index( + struct sci_remote_node_table *remote_node_table, u32 group_table_index, u32 group_index) { @@ -138,8 +138,8 @@ static void scic_sds_remote_node_table_clear_group_index( * This method will set the group index bit entry in the specified gropu index * table. none */ -static void scic_sds_remote_node_table_set_group_index( - struct scic_remote_node_table *remote_node_table, +static void sci_remote_node_table_set_group_index( + struct sci_remote_node_table *remote_node_table, u32 group_table_index, u32 group_index) { @@ -167,8 +167,8 @@ static void scic_sds_remote_node_table_set_group_index( * This method will set the remote to available in the remote node allocation * table. none */ -static void scic_sds_remote_node_table_set_node_index( - struct scic_remote_node_table *remote_node_table, +static void sci_remote_node_table_set_node_index( + struct sci_remote_node_table *remote_node_table, u32 remote_node_index) { u32 dword_location; @@ -200,8 +200,8 @@ static void scic_sds_remote_node_table_set_node_index( * This method clears the remote node index from the table of available remote * nodes. none */ -static void scic_sds_remote_node_table_clear_node_index( - struct scic_remote_node_table *remote_node_table, +static void sci_remote_node_table_clear_node_index( + struct sci_remote_node_table *remote_node_table, u32 remote_node_index) { u32 dword_location; @@ -231,8 +231,8 @@ static void scic_sds_remote_node_table_clear_node_index( * * This method clears the entire table slot at the specified slot index. none */ -static void scic_sds_remote_node_table_clear_group( - struct scic_remote_node_table *remote_node_table, +static void sci_remote_node_table_clear_group( + struct sci_remote_node_table *remote_node_table, u32 group_index) { u32 dword_location; @@ -258,8 +258,8 @@ static void scic_sds_remote_node_table_clear_group( * * THis method sets an entire remote node group in the remote node table. */ -static void scic_sds_remote_node_table_set_group( - struct scic_remote_node_table *remote_node_table, +static void sci_remote_node_table_set_group( + struct sci_remote_node_table *remote_node_table, u32 group_index) { u32 dword_location; @@ -288,8 +288,8 @@ static void scic_sds_remote_node_table_set_group( * This method will return the group value for the specified group index. The * bit values at the specified remote node group index. */ -static u8 scic_sds_remote_node_table_get_group_value( - struct scic_remote_node_table *remote_node_table, +static u8 sci_remote_node_table_get_group_value( + struct sci_remote_node_table *remote_node_table, u32 group_index) { u32 dword_location; @@ -313,8 +313,8 @@ static u8 scic_sds_remote_node_table_get_group_value( * * This method will initialize the remote node table for use. none */ -void scic_sds_remote_node_table_initialize( - struct scic_remote_node_table *remote_node_table, +void sci_remote_node_table_initialize( + struct sci_remote_node_table *remote_node_table, u32 remote_node_entries) { u32 index; @@ -342,7 +342,7 @@ void scic_sds_remote_node_table_initialize( /* Initialize each full DWORD to a FULL SET of remote nodes */ for (index = 0; index < remote_node_entries; index++) { - scic_sds_remote_node_table_set_node_index(remote_node_table, index); + sci_remote_node_table_set_node_index(remote_node_table, index); } remote_node_table->group_array_size = (u16) @@ -353,14 +353,14 @@ void scic_sds_remote_node_table_initialize( /* * These are all guaranteed to be full slot values so fill them in the * available sets of 3 remote nodes */ - scic_sds_remote_node_table_set_group_index(remote_node_table, 2, index); + sci_remote_node_table_set_group_index(remote_node_table, 2, index); } /* Now fill in any remainders that we may find */ if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 2) { - scic_sds_remote_node_table_set_group_index(remote_node_table, 1, index); + sci_remote_node_table_set_group_index(remote_node_table, 1, index); } else if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 1) { - scic_sds_remote_node_table_set_group_index(remote_node_table, 0, index); + sci_remote_node_table_set_group_index(remote_node_table, 0, index); } } @@ -379,8 +379,8 @@ void scic_sds_remote_node_table_initialize( * updated. The RNi value or an invalid remote node context if an RNi can not * be found. */ -static u16 scic_sds_remote_node_table_allocate_single_remote_node( - struct scic_remote_node_table *remote_node_table, +static u16 sci_remote_node_table_allocate_single_remote_node( + struct sci_remote_node_table *remote_node_table, u32 group_table_index) { u8 index; @@ -388,12 +388,12 @@ static u16 scic_sds_remote_node_table_allocate_single_remote_node( u32 group_index; u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - group_index = scic_sds_remote_node_table_get_group_index( + group_index = sci_remote_node_table_get_group_index( remote_node_table, group_table_index); /* We could not find an available slot in the table selector 0 */ if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { - group_value = scic_sds_remote_node_table_get_group_value( + group_value = sci_remote_node_table_get_group_value( remote_node_table, group_index); for (index = 0; index < SCU_STP_REMOTE_NODE_COUNT; index++) { @@ -402,16 +402,16 @@ static u16 scic_sds_remote_node_table_allocate_single_remote_node( remote_node_index = (u16)(group_index * SCU_STP_REMOTE_NODE_COUNT + index); - scic_sds_remote_node_table_clear_group_index( + sci_remote_node_table_clear_group_index( remote_node_table, group_table_index, group_index ); - scic_sds_remote_node_table_clear_node_index( + sci_remote_node_table_clear_node_index( remote_node_table, remote_node_index ); if (group_table_index > 0) { - scic_sds_remote_node_table_set_group_index( + sci_remote_node_table_set_group_index( remote_node_table, group_table_index - 1, group_index ); } @@ -436,24 +436,24 @@ static u16 scic_sds_remote_node_table_allocate_single_remote_node( * The remote node index that represents three consecutive remote node entries * or an invalid remote node context if none can be found. */ -static u16 scic_sds_remote_node_table_allocate_triple_remote_node( - struct scic_remote_node_table *remote_node_table, +static u16 sci_remote_node_table_allocate_triple_remote_node( + struct sci_remote_node_table *remote_node_table, u32 group_table_index) { u32 group_index; u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - group_index = scic_sds_remote_node_table_get_group_index( + group_index = sci_remote_node_table_get_group_index( remote_node_table, group_table_index); if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { remote_node_index = (u16)group_index * SCU_STP_REMOTE_NODE_COUNT; - scic_sds_remote_node_table_clear_group_index( + sci_remote_node_table_clear_group_index( remote_node_table, group_table_index, group_index ); - scic_sds_remote_node_table_clear_group( + sci_remote_node_table_clear_group( remote_node_table, group_index ); } @@ -473,31 +473,31 @@ static u16 scic_sds_remote_node_table_allocate_triple_remote_node( * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). u16 This is * the remote node index that is returned or an invalid remote node context. */ -u16 scic_sds_remote_node_table_allocate_remote_node( - struct scic_remote_node_table *remote_node_table, +u16 sci_remote_node_table_allocate_remote_node( + struct sci_remote_node_table *remote_node_table, u32 remote_node_count) { u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { remote_node_index = - scic_sds_remote_node_table_allocate_single_remote_node( + sci_remote_node_table_allocate_single_remote_node( remote_node_table, 0); if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { remote_node_index = - scic_sds_remote_node_table_allocate_single_remote_node( + sci_remote_node_table_allocate_single_remote_node( remote_node_table, 1); } if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { remote_node_index = - scic_sds_remote_node_table_allocate_single_remote_node( + sci_remote_node_table_allocate_single_remote_node( remote_node_table, 2); } } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { remote_node_index = - scic_sds_remote_node_table_allocate_triple_remote_node( + sci_remote_node_table_allocate_triple_remote_node( remote_node_table, 2); } @@ -511,8 +511,8 @@ u16 scic_sds_remote_node_table_allocate_remote_node( * This method will free a single remote node index back to the remote node * table. This routine will update the remote node groups */ -static void scic_sds_remote_node_table_release_single_remote_node( - struct scic_remote_node_table *remote_node_table, +static void sci_remote_node_table_release_single_remote_node( + struct sci_remote_node_table *remote_node_table, u16 remote_node_index) { u32 group_index; @@ -520,7 +520,7 @@ static void scic_sds_remote_node_table_release_single_remote_node( group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; - group_value = scic_sds_remote_node_table_get_group_value(remote_node_table, group_index); + group_value = sci_remote_node_table_get_group_value(remote_node_table, group_index); /* * Assert that we are not trying to add an entry to a slot that is already @@ -531,22 +531,22 @@ static void scic_sds_remote_node_table_release_single_remote_node( /* * There are no entries in this slot so it must be added to the single * slot table. */ - scic_sds_remote_node_table_set_group_index(remote_node_table, 0, group_index); + sci_remote_node_table_set_group_index(remote_node_table, 0, group_index); } else if ((group_value & (group_value - 1)) == 0) { /* * There is only one entry in this slot so it must be moved from the * single slot table to the dual slot table */ - scic_sds_remote_node_table_clear_group_index(remote_node_table, 0, group_index); - scic_sds_remote_node_table_set_group_index(remote_node_table, 1, group_index); + sci_remote_node_table_clear_group_index(remote_node_table, 0, group_index); + sci_remote_node_table_set_group_index(remote_node_table, 1, group_index); } else { /* * There are two entries in the slot so it must be moved from the dual * slot table to the tripple slot table. */ - scic_sds_remote_node_table_clear_group_index(remote_node_table, 1, group_index); - scic_sds_remote_node_table_set_group_index(remote_node_table, 2, group_index); + sci_remote_node_table_clear_group_index(remote_node_table, 1, group_index); + sci_remote_node_table_set_group_index(remote_node_table, 2, group_index); } - scic_sds_remote_node_table_set_node_index(remote_node_table, remote_node_index); + sci_remote_node_table_set_node_index(remote_node_table, remote_node_index); } /** @@ -557,19 +557,19 @@ static void scic_sds_remote_node_table_release_single_remote_node( * This method will release a group of three consecutive remote nodes back to * the free remote nodes. */ -static void scic_sds_remote_node_table_release_triple_remote_node( - struct scic_remote_node_table *remote_node_table, +static void sci_remote_node_table_release_triple_remote_node( + struct sci_remote_node_table *remote_node_table, u16 remote_node_index) { u32 group_index; group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; - scic_sds_remote_node_table_set_group_index( + sci_remote_node_table_set_group_index( remote_node_table, 2, group_index ); - scic_sds_remote_node_table_set_group(remote_node_table, group_index); + sci_remote_node_table_set_group(remote_node_table, group_index); } /** @@ -582,16 +582,16 @@ static void scic_sds_remote_node_table_release_triple_remote_node( * This method will release the remote node index back into the remote node * table free pool. */ -void scic_sds_remote_node_table_release_remote_node_index( - struct scic_remote_node_table *remote_node_table, +void sci_remote_node_table_release_remote_node_index( + struct sci_remote_node_table *remote_node_table, u32 remote_node_count, u16 remote_node_index) { if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { - scic_sds_remote_node_table_release_single_remote_node( + sci_remote_node_table_release_single_remote_node( remote_node_table, remote_node_index); } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { - scic_sds_remote_node_table_release_triple_remote_node( + sci_remote_node_table_release_triple_remote_node( remote_node_table, remote_node_index); } } diff --git a/drivers/scsi/isci/remote_node_table.h b/drivers/scsi/isci/remote_node_table.h index 5737d9a..721ab98 100644 --- a/drivers/scsi/isci/remote_node_table.h +++ b/drivers/scsi/isci/remote_node_table.h @@ -130,11 +130,11 @@ #define SCU_SATA_REMOTE_NODE_COUNT 1 /** - * struct scic_remote_node_table - + * struct sci_remote_node_table - * * */ -struct scic_remote_node_table { +struct sci_remote_node_table { /** * This field contains the array size in dwords */ @@ -172,16 +172,16 @@ struct scic_remote_node_table { /* --------------------------------------------------------------------------- */ -void scic_sds_remote_node_table_initialize( - struct scic_remote_node_table *remote_node_table, +void sci_remote_node_table_initialize( + struct sci_remote_node_table *remote_node_table, u32 remote_node_entries); -u16 scic_sds_remote_node_table_allocate_remote_node( - struct scic_remote_node_table *remote_node_table, +u16 sci_remote_node_table_allocate_remote_node( + struct sci_remote_node_table *remote_node_table, u32 remote_node_count); -void scic_sds_remote_node_table_release_remote_node_index( - struct scic_remote_node_table *remote_node_table, +void sci_remote_node_table_release_remote_node_index( + struct sci_remote_node_table *remote_node_table, u32 remote_node_count, u16 remote_node_index); diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 36e6748..bcb3c08 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -89,7 +89,7 @@ static dma_addr_t to_sgl_element_pair_dma(struct isci_host *ihost, return ihost->task_context_dma + offset; } - return scic_io_request_get_dma_addr(ireq, &ireq->sg_table[idx - 2]); + return sci_io_request_get_dma_addr(ireq, &ireq->sg_table[idx - 2]); } static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) @@ -100,7 +100,7 @@ static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) e->address_modifier = 0; } -static void scic_sds_request_build_sgl(struct isci_request *ireq) +static void sci_request_build_sgl(struct isci_request *ireq) { struct isci_host *ihost = ireq->isci_host; struct sas_task *task = isci_request_access_task(ireq); @@ -158,7 +158,7 @@ static void scic_sds_request_build_sgl(struct isci_request *ireq) } } -static void scic_sds_io_request_build_ssp_command_iu(struct isci_request *ireq) +static void sci_io_request_build_ssp_command_iu(struct isci_request *ireq) { struct ssp_cmd_iu *cmd_iu; struct sas_task *task = isci_request_access_task(ireq); @@ -178,7 +178,7 @@ static void scic_sds_io_request_build_ssp_command_iu(struct isci_request *ireq) sizeof(task->ssp_task.cdb) / sizeof(u32)); } -static void scic_sds_task_request_build_ssp_task_iu(struct isci_request *ireq) +static void sci_task_request_build_ssp_task_iu(struct isci_request *ireq) { struct ssp_task_iu *task_iu; struct sas_task *task = isci_request_access_task(ireq); @@ -211,8 +211,8 @@ static void scu_ssp_reqeust_construct_task_context( struct isci_remote_device *idev; struct isci_port *iport; - idev = scic_sds_request_get_device(ireq); - iport = scic_sds_request_get_port(ireq); + idev = sci_request_get_device(ireq); + iport = sci_request_get_port(ireq); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -220,13 +220,13 @@ static void scu_ssp_reqeust_construct_task_context( task_context->initiator_request = 1; task_context->connection_rate = idev->connection_rate; task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(controller); - task_context->logical_port_index = scic_sds_port_get_index(iport); + sci_controller_get_protocol_engine_group(controller); + task_context->logical_port_index = sci_port_get_index(iport); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; - task_context->remote_node_index = scic_sds_remote_device_get_index(idev); + task_context->remote_node_index = sci_remote_device_get_index(idev); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -242,9 +242,9 @@ static void scu_ssp_reqeust_construct_task_context( task_context->task_phase = 0x01; ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(controller) << + (sci_controller_get_protocol_engine_group(controller) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(iport) << + (sci_port_get_index(iport) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | ISCI_TAG_TCI(ireq->io_tag)); @@ -252,7 +252,7 @@ static void scu_ssp_reqeust_construct_task_context( * Copy the physical address for the command buffer to the * SCU Task Context */ - dma_addr = scic_io_request_get_dma_addr(ireq, &ireq->ssp.cmd); + dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.cmd); task_context->command_iu_upper = upper_32_bits(dma_addr); task_context->command_iu_lower = lower_32_bits(dma_addr); @@ -261,7 +261,7 @@ static void scu_ssp_reqeust_construct_task_context( * Copy the physical address for the response buffer to the * SCU Task Context */ - dma_addr = scic_io_request_get_dma_addr(ireq, &ireq->ssp.rsp); + dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.rsp); task_context->response_iu_upper = upper_32_bits(dma_addr); task_context->response_iu_lower = lower_32_bits(dma_addr); @@ -298,7 +298,7 @@ static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq, task_context->transfer_length_bytes = len; if (task_context->transfer_length_bytes > 0) - scic_sds_request_build_sgl(ireq); + sci_request_build_sgl(ireq); } /** @@ -349,8 +349,8 @@ static void scu_sata_reqeust_construct_task_context( struct isci_remote_device *idev; struct isci_port *iport; - idev = scic_sds_request_get_device(ireq); - iport = scic_sds_request_get_port(ireq); + idev = sci_request_get_device(ireq); + iport = sci_request_get_port(ireq); /* Fill in the TC with the its required data */ task_context->abort = 0; @@ -358,14 +358,14 @@ static void scu_sata_reqeust_construct_task_context( task_context->initiator_request = 1; task_context->connection_rate = idev->connection_rate; task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(controller); + sci_controller_get_protocol_engine_group(controller); task_context->logical_port_index = - scic_sds_port_get_index(iport); + sci_port_get_index(iport); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; - task_context->remote_node_index = scic_sds_remote_device_get_index(idev); + task_context->remote_node_index = sci_remote_device_get_index(idev); task_context->command_code = 0; task_context->link_layer_control = 0; @@ -385,9 +385,9 @@ static void scu_sata_reqeust_construct_task_context( task_context->type.words[0] = *(u32 *)&ireq->stp.cmd; ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(controller) << + (sci_controller_get_protocol_engine_group(controller) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(iport) << + (sci_port_get_index(iport) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | ISCI_TAG_TCI(ireq->io_tag)); /* @@ -395,7 +395,7 @@ static void scu_sata_reqeust_construct_task_context( * Context. We must offset the command buffer by 4 bytes because the * first 4 bytes are transfered in the body of the TC. */ - dma_addr = scic_io_request_get_dma_addr(ireq, + dma_addr = sci_io_request_get_dma_addr(ireq, ((char *) &ireq->stp.cmd) + sizeof(u32)); @@ -420,7 +420,7 @@ static void scu_stp_raw_request_construct_task_context(struct isci_request *ireq task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); } -static enum sci_status scic_sds_stp_pio_request_construct(struct isci_request *ireq, +static enum sci_status sci_stp_pio_request_construct(struct isci_request *ireq, bool copy_rx_frame) { struct isci_stp_request *stp_req = &ireq->stp.req; @@ -432,7 +432,7 @@ static enum sci_status scic_sds_stp_pio_request_construct(struct isci_request *i stp_req->sgl.set = SCU_SGL_ELEMENT_PAIR_A; if (copy_rx_frame) { - scic_sds_request_build_sgl(ireq); + sci_request_build_sgl(ireq); stp_req->sgl.index = 0; } else { /* The user does not want the data copied to the SGL buffer location */ @@ -454,7 +454,7 @@ static enum sci_status scic_sds_stp_pio_request_construct(struct isci_request *i * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method * returns an indication as to whether the construction was successful. */ -static void scic_sds_stp_optimized_request_construct(struct isci_request *ireq, +static void sci_stp_optimized_request_construct(struct isci_request *ireq, u8 optimized_task_type, u32 len, enum dma_data_direction dir) @@ -465,7 +465,7 @@ static void scic_sds_stp_optimized_request_construct(struct isci_request *ireq, scu_sata_reqeust_construct_task_context(ireq, task_context); /* Copy over the SGL elements */ - scic_sds_request_build_sgl(ireq); + sci_request_build_sgl(ireq); /* Copy over the number of bytes to be transfered */ task_context->transfer_length_bytes = len; @@ -490,7 +490,7 @@ static void scic_sds_stp_optimized_request_construct(struct isci_request *ireq, static enum sci_status -scic_io_request_construct_sata(struct isci_request *ireq, +sci_io_request_construct_sata(struct isci_request *ireq, u32 len, enum dma_data_direction dir, bool copy) @@ -533,7 +533,7 @@ scic_io_request_construct_sata(struct isci_request *ireq, /* NCQ */ if (task->ata_task.use_ncq) { - scic_sds_stp_optimized_request_construct(ireq, + sci_stp_optimized_request_construct(ireq, SCU_TASK_TYPE_FPDMAQ_READ, len, dir); return SCI_SUCCESS; @@ -541,17 +541,17 @@ scic_io_request_construct_sata(struct isci_request *ireq, /* DMA */ if (task->ata_task.dma_xfer) { - scic_sds_stp_optimized_request_construct(ireq, + sci_stp_optimized_request_construct(ireq, SCU_TASK_TYPE_DMA_IN, len, dir); return SCI_SUCCESS; } else /* PIO */ - return scic_sds_stp_pio_request_construct(ireq, copy); + return sci_stp_pio_request_construct(ireq, copy); return status; } -static enum sci_status scic_io_request_construct_basic_ssp(struct isci_request *ireq) +static enum sci_status sci_io_request_construct_basic_ssp(struct isci_request *ireq) { struct sas_task *task = isci_request_access_task(ireq); @@ -561,28 +561,28 @@ static enum sci_status scic_io_request_construct_basic_ssp(struct isci_request * task->data_dir, task->total_xfer_len); - scic_sds_io_request_build_ssp_command_iu(ireq); + sci_io_request_build_ssp_command_iu(ireq); sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); return SCI_SUCCESS; } -enum sci_status scic_task_request_construct_ssp( +enum sci_status sci_task_request_construct_ssp( struct isci_request *ireq) { /* Construct the SSP Task SCU Task Context */ scu_ssp_task_request_construct_task_context(ireq); /* Fill in the SSP Task IU */ - scic_sds_task_request_build_ssp_task_iu(ireq); + sci_task_request_build_ssp_task_iu(ireq); sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); return SCI_SUCCESS; } -static enum sci_status scic_io_request_construct_basic_sata(struct isci_request *ireq) +static enum sci_status sci_io_request_construct_basic_sata(struct isci_request *ireq) { enum sci_status status; bool copy = false; @@ -592,7 +592,7 @@ static enum sci_status scic_io_request_construct_basic_sata(struct isci_request copy = (task->data_dir == DMA_NONE) ? false : true; - status = scic_io_request_construct_sata(ireq, + status = sci_io_request_construct_sata(ireq, task->total_xfer_len, task->data_dir, copy); @@ -603,7 +603,7 @@ static enum sci_status scic_io_request_construct_basic_sata(struct isci_request return status; } -enum sci_status scic_task_request_construct_sata(struct isci_request *ireq) +enum sci_status sci_task_request_construct_sata(struct isci_request *ireq) { enum sci_status status = SCI_SUCCESS; @@ -648,7 +648,7 @@ static u32 sci_req_tx_bytes(struct isci_request *ireq) * BAR1 is the scu_registers * 0x20002C = 0x200000 + 0x2c * = start of task context SRAM + offset of (type.ssp.data_offset) - * TCi is the io_tag of struct scic_sds_request + * TCi is the io_tag of struct sci_request */ ret_val = readl(scu_reg_base + (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + @@ -658,7 +658,7 @@ static u32 sci_req_tx_bytes(struct isci_request *ireq) return ret_val; } -enum sci_status scic_sds_request_start(struct isci_request *ireq) +enum sci_status sci_request_start(struct isci_request *ireq) { enum sci_base_request_states state; struct scu_task_context *tc = ireq->tc; @@ -708,7 +708,7 @@ enum sci_status scic_sds_request_start(struct isci_request *ireq) } enum sci_status -scic_sds_io_request_terminate(struct isci_request *ireq) +sci_io_request_terminate(struct isci_request *ireq) { enum sci_base_request_states state; @@ -716,7 +716,7 @@ scic_sds_io_request_terminate(struct isci_request *ireq) switch (state) { case SCI_REQ_CONSTRUCTED: - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED); @@ -759,7 +759,7 @@ scic_sds_io_request_terminate(struct isci_request *ireq) return SCI_FAILURE_INVALID_STATE; } -enum sci_status scic_sds_request_complete(struct isci_request *ireq) +enum sci_status sci_request_complete(struct isci_request *ireq) { enum sci_base_request_states state; struct isci_host *ihost = ireq->owning_controller; @@ -770,7 +770,7 @@ enum sci_status scic_sds_request_complete(struct isci_request *ireq) return SCI_FAILURE_INVALID_STATE; if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) - scic_sds_controller_release_frame(ihost, + sci_controller_release_frame(ihost, ireq->saved_rx_frame_index); /* XXX can we just stop the machine and remove the 'final' state? */ @@ -778,7 +778,7 @@ enum sci_status scic_sds_request_complete(struct isci_request *ireq) return SCI_SUCCESS; } -enum sci_status scic_sds_io_request_event_handler(struct isci_request *ireq, +enum sci_status sci_io_request_event_handler(struct isci_request *ireq, u32 event_code) { enum sci_base_request_states state; @@ -818,7 +818,7 @@ enum sci_status scic_sds_io_request_event_handler(struct isci_request *ireq, * @sci_req: This parameter specifies the request object for which to copy * the response data. */ -static void scic_sds_io_request_copy_response(struct isci_request *ireq) +static void sci_io_request_copy_response(struct isci_request *ireq) { void *resp_buf; u32 len; @@ -848,7 +848,7 @@ request_started_state_tc_event(struct isci_request *ireq, */ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; @@ -868,11 +868,11 @@ request_started_state_tc_event(struct isci_request *ireq, word_cnt); if (resp->status == 0) { - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY); } else { - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); } @@ -885,7 +885,7 @@ request_started_state_tc_event(struct isci_request *ireq, &ireq->ssp.rsp, word_cnt); - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); break; @@ -900,11 +900,11 @@ request_started_state_tc_event(struct isci_request *ireq, datapres = resp_iu->datapres; if (datapres == 1 || datapres == 2) { - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); } else - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; @@ -921,12 +921,12 @@ request_started_state_tc_event(struct isci_request *ireq, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): if (ireq->protocol == SCIC_STP_PROTOCOL) { - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); } else { - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -944,7 +944,7 @@ request_started_state_tc_event(struct isci_request *ireq, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); @@ -967,7 +967,7 @@ request_started_state_tc_event(struct isci_request *ireq, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): default: - scic_sds_request_set_status( + sci_request_set_status( ireq, SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT, @@ -991,7 +991,7 @@ request_aborting_state_tc_event(struct isci_request *ireq, switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): - scic_sds_request_set_status(ireq, SCU_TASK_DONE_TASK_ABORT, + sci_request_set_status(ireq, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); @@ -1012,7 +1012,7 @@ static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); @@ -1036,7 +1036,7 @@ static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq * If a NAK was received, then it is up to the user to retry * the request. */ - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -1057,7 +1057,7 @@ smp_request_await_response_tc_event(struct isci_request *ireq, * unexpected. but if the TC has success status, we * complete the IO anyway. */ - scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); @@ -1074,7 +1074,7 @@ smp_request_await_response_tc_event(struct isci_request *ireq, * these SMP_XXX_XX_ERR status. For these type of error, * we ask ihost user to retry the request. */ - scic_sds_request_set_status(ireq, SCU_TASK_DONE_SMP_RESP_TO_ERR, + sci_request_set_status(ireq, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); @@ -1084,7 +1084,7 @@ smp_request_await_response_tc_event(struct isci_request *ireq, /* All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request */ - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -1101,7 +1101,7 @@ smp_request_await_tc_event(struct isci_request *ireq, { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); @@ -1111,7 +1111,7 @@ smp_request_await_tc_event(struct isci_request *ireq, * complete. If a NAK was received, then it is up to * the user to retry the request. */ - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -1122,7 +1122,7 @@ smp_request_await_tc_event(struct isci_request *ireq, return SCI_SUCCESS; } -void scic_stp_io_request_set_ncq_tag(struct isci_request *ireq, +void sci_stp_io_request_set_ncq_tag(struct isci_request *ireq, u16 ncq_tag) { /** @@ -1171,7 +1171,7 @@ stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_change_state(&ireq->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H); @@ -1182,7 +1182,7 @@ stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, * complete. If a NAK was received, then it is up to * the user to retry the request. */ - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -1198,7 +1198,7 @@ stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, /* transmit DATA_FIS from (current sgl + offset) for input * parameter length. current sgl and offset is alreay stored in the IO request */ -static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( +static enum sci_status sci_stp_request_pio_data_out_trasmit_data_frame( struct isci_request *ireq, u32 length) { @@ -1223,10 +1223,10 @@ static enum sci_status scic_sds_stp_request_pio_data_out_trasmit_data_frame( task_context->type.stp.fis_type = FIS_DATA; /* send the new TC out. */ - return scic_controller_continue_io(ireq); + return sci_controller_continue_io(ireq); } -static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct isci_request *ireq) +static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_request *ireq) { struct isci_stp_request *stp_req = &ireq->stp.req; struct scu_sgl_element_pair *sgl_pair; @@ -1252,7 +1252,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct is return SCI_SUCCESS; if (stp_req->pio_len >= len) { - status = scic_sds_stp_request_pio_data_out_trasmit_data_frame(ireq, len); + status = sci_stp_request_pio_data_out_trasmit_data_frame(ireq, len); if (status != SCI_SUCCESS) return status; stp_req->pio_len -= len; @@ -1261,7 +1261,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct is sgl = pio_sgl_next(stp_req); offset = 0; } else if (stp_req->pio_len < len) { - scic_sds_stp_request_pio_data_out_trasmit_data_frame(ireq, stp_req->pio_len); + sci_stp_request_pio_data_out_trasmit_data_frame(ireq, stp_req->pio_len); /* Sgl offset will be adjusted and saved for future */ offset += stp_req->pio_len; @@ -1284,7 +1284,7 @@ static enum sci_status scic_sds_stp_request_pio_data_out_transmit_data(struct is * specified data region. enum sci_status */ static enum sci_status -scic_sds_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req, +sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req, u8 *data_buf, u32 len) { struct isci_request *ireq; @@ -1328,7 +1328,7 @@ scic_sds_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_r * * Copy the data buffer to the io request data region. enum sci_status */ -static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( +static enum sci_status sci_stp_request_pio_data_in_copy_data( struct isci_stp_request *stp_req, u8 *data_buffer) { @@ -1338,14 +1338,14 @@ static enum sci_status scic_sds_stp_request_pio_data_in_copy_data( * If there is less than 1K remaining in the transfer request * copy just the data for the transfer */ if (stp_req->pio_len < SCU_MAX_FRAME_BUFFER_SIZE) { - status = scic_sds_stp_request_pio_data_in_copy_data_buffer( + status = sci_stp_request_pio_data_in_copy_data_buffer( stp_req, data_buffer, stp_req->pio_len); if (status == SCI_SUCCESS) stp_req->pio_len = 0; } else { /* We are transfering the whole frame so copy */ - status = scic_sds_stp_request_pio_data_in_copy_data_buffer( + status = sci_stp_request_pio_data_in_copy_data_buffer( stp_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); if (status == SCI_SUCCESS) @@ -1363,7 +1363,7 @@ stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq, switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); @@ -1375,7 +1375,7 @@ stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq, * complete. If a NAK was received, then it is up to * the user to retry the request. */ - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -1398,7 +1398,7 @@ pio_data_out_tx_done_tc_event(struct isci_request *ireq, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): /* Transmit data */ if (stp_req->pio_len != 0) { - status = scic_sds_stp_request_pio_data_out_transmit_data(ireq); + status = sci_stp_request_pio_data_out_transmit_data(ireq); if (status == SCI_SUCCESS) { if (stp_req->pio_len == 0) all_frames_transferred = true; @@ -1426,7 +1426,7 @@ pio_data_out_tx_done_tc_event(struct isci_request *ireq, * If a NAK was received, then it is up to the user to retry * the request. */ - scic_sds_request_set_status( + sci_request_set_status( ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -1438,16 +1438,16 @@ pio_data_out_tx_done_tc_event(struct isci_request *ireq, return status; } -static void scic_sds_stp_request_udma_complete_request( +static void sci_stp_request_udma_complete_request( struct isci_request *ireq, u32 scu_status, enum sci_status sci_status) { - scic_sds_request_set_status(ireq, scu_status, sci_status); + sci_request_set_status(ireq, scu_status, sci_status); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } -static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct isci_request *ireq, +static enum sci_status sci_stp_request_udma_general_frame_handler(struct isci_request *ireq, u32 frame_index) { struct isci_host *ihost = ireq->owning_controller; @@ -1455,28 +1455,28 @@ static enum sci_status scic_sds_stp_request_udma_general_frame_handler(struct is enum sci_status status; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); if ((status == SCI_SUCCESS) && (frame_header->fis_type == FIS_REGD2H)) { - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&ireq->stp.rsp, + sci_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); } - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return status; } enum sci_status -scic_sds_io_request_frame_handler(struct isci_request *ireq, +sci_io_request_frame_handler(struct isci_request *ireq, u32 frame_index) { struct isci_host *ihost = ireq->owning_controller; @@ -1491,7 +1491,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct ssp_frame_hdr ssp_hdr; void *frame_header; - scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, &frame_header); @@ -1502,7 +1502,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct ssp_response_iu *resp_iu; ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&resp_iu); @@ -1512,11 +1512,11 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, if (resp_iu->datapres == 0x01 || resp_iu->datapres == 0x02) { - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); } else - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); } else { @@ -1531,22 +1531,22 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, * In any case we are done with this frame buffer return it to * the controller */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return SCI_SUCCESS; } case SCI_REQ_TASK_WAIT_TC_RESP: - scic_sds_io_request_copy_response(ireq); + sci_io_request_copy_response(ireq); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); - scic_sds_controller_release_frame(ihost,frame_index); + sci_controller_release_frame(ihost, frame_index); return SCI_SUCCESS; case SCI_REQ_SMP_WAIT_RESP: { struct smp_resp *rsp_hdr = &ireq->smp.rsp; void *frame_header; - scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, &frame_header); @@ -1557,7 +1557,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, if (rsp_hdr->frame_type == SMP_RESPONSE) { void *smp_resp; - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, &smp_resp); @@ -1567,7 +1567,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, smp_resp, word_cnt); - scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_change_state(&ireq->sm, SCI_REQ_SMP_WAIT_TC_COMP); @@ -1584,31 +1584,31 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, frame_index, rsp_hdr->frame_type); - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_SMP_FRM_TYPE_ERR, SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return SCI_SUCCESS; } case SCI_REQ_STP_UDMA_WAIT_TC_COMP: - return scic_sds_stp_request_udma_general_frame_handler(ireq, + return sci_stp_request_udma_general_frame_handler(ireq, frame_index); case SCI_REQ_STP_UDMA_WAIT_D2H: /* Use the general frame handler to copy the resposne data */ - status = scic_sds_stp_request_udma_general_frame_handler(ireq, + status = sci_stp_request_udma_general_frame_handler(ireq, frame_index); if (status != SCI_SUCCESS) return status; - scic_sds_stp_request_udma_complete_request(ireq, + sci_stp_request_udma_complete_request(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); @@ -1618,7 +1618,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct dev_to_host_fis *frame_header; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); @@ -1636,16 +1636,16 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, switch (frame_header->fis_type) { case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&ireq->stp.rsp, + sci_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); /* The command has completed with error */ - scic_sds_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, + sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); break; @@ -1655,7 +1655,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, "violation occurred\n", __func__, stp_req, frame_index); - scic_sds_request_set_status(ireq, SCU_TASK_DONE_UNEXP_FIS, + sci_request_set_status(ireq, SCU_TASK_DONE_UNEXP_FIS, SCI_FAILURE_PROTOCOL_VIOLATION); break; } @@ -1663,7 +1663,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return status; } @@ -1673,7 +1673,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct dev_to_host_fis *frame_header; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); @@ -1688,7 +1688,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, switch (frame_header->fis_type) { case FIS_PIO_SETUP: /* Get from the frame buffer the PIO Setup Data */ - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); @@ -1704,7 +1704,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, /* status: 4th byte in the 3rd dword */ stp_req->status = (frame_buffer[2] >> 24) & 0xff; - scic_sds_controller_copy_sata_response(&ireq->stp.rsp, + sci_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); @@ -1717,7 +1717,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_IN); } else if (task->data_dir == DMA_TO_DEVICE) { /* Transmit data */ - status = scic_sds_stp_request_pio_data_out_transmit_data(ireq); + status = sci_stp_request_pio_data_out_transmit_data(ireq); if (status != SCI_SUCCESS) break; sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_OUT); @@ -1745,15 +1745,15 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, break; } - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&ireq->stp.req, + sci_controller_copy_sata_response(&ireq->stp.req, frame_header, frame_buffer); - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); @@ -1766,7 +1766,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, } /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return status; } @@ -1775,7 +1775,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct dev_to_host_fis *frame_header; struct sata_fis_data *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); @@ -1800,14 +1800,14 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, frame_index, frame_header->fis_type); - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return status; } @@ -1815,15 +1815,15 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, ireq->saved_rx_frame_index = frame_index; stp_req->pio_len = 0; } else { - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); - status = scic_sds_stp_request_pio_data_in_copy_data(stp_req, + status = sci_stp_request_pio_data_in_copy_data(stp_req, (u8 *)frame_buffer); /* Frame is decoded return it to the controller */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); } /* Check for the end of the transfer, are there more @@ -1833,7 +1833,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, return status; if ((stp_req->status & ATA_BUSY) == 0) { - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); @@ -1848,7 +1848,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, struct dev_to_host_fis *frame_header; u32 *frame_buffer; - status = scic_sds_unsolicited_frame_control_get_header(&ihost->uf_control, + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, frame_index, (void **)&frame_header); if (status != SCI_SUCCESS) { @@ -1864,16 +1864,16 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, switch (frame_header->fis_type) { case FIS_REGD2H: - scic_sds_unsolicited_frame_control_get_buffer(&ihost->uf_control, + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, frame_index, (void **)&frame_buffer); - scic_sds_controller_copy_sata_response(&ireq->stp.rsp, + sci_controller_copy_sata_response(&ireq->stp.rsp, frame_header, frame_buffer); /* The command has completed with error */ - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); break; @@ -1886,7 +1886,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, stp_req, frame_index); - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_TASK_DONE_UNEXP_FIS, SCI_FAILURE_PROTOCOL_VIOLATION); break; @@ -1895,7 +1895,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame has been decoded return it to the controller */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return status; } @@ -1904,7 +1904,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, * TODO: Is it even possible to get an unsolicited frame in the * aborting state? */ - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return SCI_SUCCESS; default: @@ -1915,7 +1915,7 @@ scic_sds_io_request_frame_handler(struct isci_request *ireq, frame_index, state); - scic_sds_controller_release_frame(ihost, frame_index); + sci_controller_release_frame(ihost, frame_index); return SCI_FAILURE_INVALID_STATE; } } @@ -1927,7 +1927,7 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_stp_request_udma_complete_request(ireq, + sci_stp_request_udma_complete_request(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); break; @@ -1938,10 +1938,10 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq * completion. */ if (ireq->stp.rsp.fis_type == FIS_REGD2H) { - scic_sds_remote_device_suspend(ireq->target_device, + sci_remote_device_suspend(ireq->target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); - scic_sds_stp_request_udma_complete_request(ireq, + sci_stp_request_udma_complete_request(ireq, SCU_TASK_DONE_CHECK_RESPONSE, SCI_FAILURE_IO_RESPONSE_VALID); } else { @@ -1965,12 +1965,12 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): - scic_sds_remote_device_suspend(ireq->target_device, + sci_remote_device_suspend(ireq->target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); /* Fall through to the default case */ default: /* All other completion status cause the IO to be complete. */ - scic_sds_stp_request_udma_complete_request(ireq, + sci_stp_request_udma_complete_request(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); break; @@ -1985,7 +1985,7 @@ stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq, { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG); @@ -1997,7 +1997,7 @@ stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq, * If a NAK was received, then it is up to the user to retry * the request. */ - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -2014,7 +2014,7 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - scic_sds_request_set_status(ireq, SCU_TASK_DONE_GOOD, + sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, SCI_SUCCESS); sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H); @@ -2025,7 +2025,7 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, * a NAK was received, then it is up to the user to retry the * request. */ - scic_sds_request_set_status(ireq, + sci_request_set_status(ireq, SCU_NORMALIZE_COMPLETION_STATUS(completion_code), SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); @@ -2037,7 +2037,7 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, } enum sci_status -scic_sds_io_request_tc_completion(struct isci_request *ireq, +sci_io_request_tc_completion(struct isci_request *ireq, u32 completion_code) { enum sci_base_request_states state; @@ -2832,7 +2832,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost, ); /* complete the io request to the core. */ - scic_controller_complete_io(ihost, request->target_device, request); + sci_controller_complete_io(ihost, request->target_device, request); isci_put_device(idev); /* set terminated handle so it cannot be completed or @@ -2842,7 +2842,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost, set_bit(IREQ_TERMINATED, &request->flags); } -static void scic_sds_request_started_state_enter(struct sci_base_state_machine *sm) +static void sci_request_started_state_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); struct domain_device *dev = ireq->target_device->domain_dev; @@ -2879,7 +2879,7 @@ static void scic_sds_request_started_state_enter(struct sci_base_state_machine * } } -static void scic_sds_request_completed_state_enter(struct sci_base_state_machine *sm) +static void sci_request_completed_state_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); struct isci_host *ihost = ireq->owning_controller; @@ -2892,7 +2892,7 @@ static void scic_sds_request_completed_state_enter(struct sci_base_state_machine isci_task_request_complete(ihost, ireq, ireq->sci_status); } -static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine *sm) +static void sci_request_aborting_state_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); @@ -2900,31 +2900,31 @@ static void scic_sds_request_aborting_state_enter(struct sci_base_state_machine ireq->tc->abort = 1; } -static void scic_sds_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) +static void sci_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - scic_sds_remote_device_set_working_request(ireq->target_device, + sci_remote_device_set_working_request(ireq->target_device, ireq); } -static void scic_sds_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) +static void sci_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - scic_sds_remote_device_set_working_request(ireq->target_device, + sci_remote_device_set_working_request(ireq->target_device, ireq); } -static void scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) +static void sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - scic_sds_remote_device_set_working_request(ireq->target_device, + sci_remote_device_set_working_request(ireq->target_device, ireq); } -static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) +static void sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); struct scu_task_context *tc = ireq->tc; @@ -2938,22 +2938,22 @@ static void scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_complet /* Clear the TC control bit */ tc->control_frame = 0; - status = scic_controller_continue_io(ireq); + status = sci_controller_continue_io(ireq); WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n"); } -static const struct sci_base_state scic_sds_request_state_table[] = { +static const struct sci_base_state sci_request_state_table[] = { [SCI_REQ_INIT] = { }, [SCI_REQ_CONSTRUCTED] = { }, [SCI_REQ_STARTED] = { - .enter_state = scic_sds_request_started_state_enter, + .enter_state = sci_request_started_state_enter, }, [SCI_REQ_STP_NON_DATA_WAIT_H2D] = { - .enter_state = scic_sds_stp_request_started_non_data_await_h2d_completion_enter, + .enter_state = sci_stp_request_started_non_data_await_h2d_completion_enter, }, [SCI_REQ_STP_NON_DATA_WAIT_D2H] = { }, [SCI_REQ_STP_PIO_WAIT_H2D] = { - .enter_state = scic_sds_stp_request_started_pio_await_h2d_completion_enter, + .enter_state = sci_stp_request_started_pio_await_h2d_completion_enter, }, [SCI_REQ_STP_PIO_WAIT_FRAME] = { }, [SCI_REQ_STP_PIO_DATA_IN] = { }, @@ -2961,10 +2961,10 @@ static const struct sci_base_state scic_sds_request_state_table[] = { [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { }, [SCI_REQ_STP_UDMA_WAIT_D2H] = { }, [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, + .enter_state = sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, }, [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG] = { - .enter_state = scic_sds_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, + .enter_state = sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, }, [SCI_REQ_STP_SOFT_RESET_WAIT_D2H] = { }, [SCI_REQ_TASK_WAIT_TC_COMP] = { }, @@ -2972,20 +2972,20 @@ static const struct sci_base_state scic_sds_request_state_table[] = { [SCI_REQ_SMP_WAIT_RESP] = { }, [SCI_REQ_SMP_WAIT_TC_COMP] = { }, [SCI_REQ_COMPLETED] = { - .enter_state = scic_sds_request_completed_state_enter, + .enter_state = sci_request_completed_state_enter, }, [SCI_REQ_ABORTING] = { - .enter_state = scic_sds_request_aborting_state_enter, + .enter_state = sci_request_aborting_state_enter, }, [SCI_REQ_FINAL] = { }, }; static void -scic_sds_general_request_construct(struct isci_host *ihost, +sci_general_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { - sci_init_sm(&ireq->sm, scic_sds_request_state_table, SCI_REQ_INIT); + sci_init_sm(&ireq->sm, sci_request_state_table, SCI_REQ_INIT); ireq->target_device = idev; ireq->protocol = SCIC_NO_PROTOCOL; @@ -2997,7 +2997,7 @@ scic_sds_general_request_construct(struct isci_host *ihost, } static enum sci_status -scic_io_request_construct(struct isci_host *ihost, +sci_io_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_request *ireq) { @@ -3005,7 +3005,7 @@ scic_io_request_construct(struct isci_host *ihost, enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(ihost, idev, ireq); + sci_general_request_construct(ihost, idev, ireq); if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) return SCI_FAILURE_INVALID_REMOTE_DEVICE; @@ -3024,7 +3024,7 @@ scic_io_request_construct(struct isci_host *ihost, return status; } -enum sci_status scic_task_request_construct(struct isci_host *ihost, +enum sci_status sci_task_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, u16 io_tag, struct isci_request *ireq) { @@ -3032,7 +3032,7 @@ enum sci_status scic_task_request_construct(struct isci_host *ihost, enum sci_status status = SCI_SUCCESS; /* Build the common part of the request */ - scic_sds_general_request_construct(ihost, idev, ireq); + sci_general_request_construct(ihost, idev, ireq); if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { @@ -3053,7 +3053,7 @@ static enum sci_status isci_request_ssp_request_construct( "%s: request = %p\n", __func__, request); - status = scic_io_request_construct_basic_ssp(request); + status = sci_io_request_construct_basic_ssp(request); return status; } @@ -3074,7 +3074,7 @@ static enum sci_status isci_request_stp_request_construct( */ register_fis = isci_sata_task_to_fis_copy(task); - status = scic_io_request_construct_basic_sata(request); + status = sci_io_request_construct_basic_sata(request); /* Set the ncq tag in the fis, from the queue * command in the task. @@ -3091,7 +3091,7 @@ static enum sci_status isci_request_stp_request_construct( } static enum sci_status -scic_io_request_construct_smp(struct device *dev, +sci_io_request_construct_smp(struct device *dev, struct isci_request *ireq, struct sas_task *task) { @@ -3141,8 +3141,8 @@ scic_io_request_construct_smp(struct device *dev, task_context = ireq->tc; - idev = scic_sds_request_get_device(ireq); - iport = scic_sds_request_get_port(ireq); + idev = sci_request_get_device(ireq); + iport = sci_request_get_port(ireq); /* * Fill in the TC with the its required data @@ -3152,8 +3152,8 @@ scic_io_request_construct_smp(struct device *dev, task_context->initiator_request = 1; task_context->connection_rate = idev->connection_rate; task_context->protocol_engine_index = - scic_sds_controller_get_protocol_engine_group(ihost); - task_context->logical_port_index = scic_sds_port_get_index(iport); + sci_controller_get_protocol_engine_group(ihost); + task_context->logical_port_index = sci_port_get_index(iport); task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; task_context->abort = 0; task_context->valid = SCU_TASK_CONTEXT_VALID; @@ -3195,9 +3195,9 @@ scic_io_request_construct_smp(struct device *dev, task_context->task_phase = 0; ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (scic_sds_controller_get_protocol_engine_group(ihost) << + (sci_controller_get_protocol_engine_group(ihost) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (scic_sds_port_get_index(iport) << + (sci_port_get_index(iport) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | ISCI_TAG_TCI(ireq->io_tag)); /* @@ -3229,7 +3229,7 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) struct device *dev = &ireq->isci_host->pdev->dev; enum sci_status status = SCI_FAILURE; - status = scic_io_request_construct_smp(dev, ireq, task); + status = sci_io_request_construct_smp(dev, ireq, task); if (status != SCI_SUCCESS) dev_warn(&ireq->isci_host->pdev->dev, "%s: failed with status = %d\n", @@ -3283,7 +3283,7 @@ static enum sci_status isci_io_request_build(struct isci_host *ihost, return SCI_FAILURE_INSUFFICIENT_RESOURCES; } - status = scic_io_request_construct(ihost, idev, request); + status = sci_io_request_construct(ihost, idev, request); if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, @@ -3388,7 +3388,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide * request was built that way (ie. * ireq->is_task_management_request is false). */ - status = scic_controller_start_task(ihost, + status = sci_controller_start_task(ihost, idev, ireq); } else { @@ -3396,7 +3396,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide } } else { /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io(ihost, idev, + status = sci_controller_start_io(ihost, idev, ireq); } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 0cafcea..08fcf98 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -301,75 +301,75 @@ enum sci_base_request_states { }; /** - * scic_sds_request_get_controller() - + * sci_request_get_controller() - * * This macro will return the controller for this io request object */ -#define scic_sds_request_get_controller(ireq) \ +#define sci_request_get_controller(ireq) \ ((ireq)->owning_controller) /** - * scic_sds_request_get_device() - + * sci_request_get_device() - * * This macro will return the device for this io request object */ -#define scic_sds_request_get_device(ireq) \ +#define sci_request_get_device(ireq) \ ((ireq)->target_device) /** - * scic_sds_request_get_port() - + * sci_request_get_port() - * * This macro will return the port for this io request object */ -#define scic_sds_request_get_port(ireq) \ - scic_sds_remote_device_get_port(scic_sds_request_get_device(ireq)) +#define sci_request_get_port(ireq) \ + sci_remote_device_get_port(sci_request_get_device(ireq)) /** - * scic_sds_request_get_post_context() - + * sci_request_get_post_context() - * * This macro returns the constructed post context result for the io request. */ -#define scic_sds_request_get_post_context(ireq) \ +#define sci_request_get_post_context(ireq) \ ((ireq)->post_context) /** - * scic_sds_request_get_task_context() - + * sci_request_get_task_context() - * * This is a helper macro to return the os handle for this request object. */ -#define scic_sds_request_get_task_context(request) \ +#define sci_request_get_task_context(request) \ ((request)->task_context_buffer) /** - * scic_sds_request_set_status() - + * sci_request_set_status() - * * This macro will set the scu hardware status and sci request completion * status for an io request. */ -#define scic_sds_request_set_status(request, scu_status_code, sci_status_code) \ +#define sci_request_set_status(request, scu_status_code, sci_status_code) \ { \ (request)->scu_status = (scu_status_code); \ (request)->sci_status = (sci_status_code); \ } -enum sci_status scic_sds_request_start(struct isci_request *ireq); -enum sci_status scic_sds_io_request_terminate(struct isci_request *ireq); +enum sci_status sci_request_start(struct isci_request *ireq); +enum sci_status sci_io_request_terminate(struct isci_request *ireq); enum sci_status -scic_sds_io_request_event_handler(struct isci_request *ireq, +sci_io_request_event_handler(struct isci_request *ireq, u32 event_code); enum sci_status -scic_sds_io_request_frame_handler(struct isci_request *ireq, +sci_io_request_frame_handler(struct isci_request *ireq, u32 frame_index); enum sci_status -scic_sds_task_request_terminate(struct isci_request *ireq); +sci_task_request_terminate(struct isci_request *ireq); extern enum sci_status -scic_sds_request_complete(struct isci_request *ireq); +sci_request_complete(struct isci_request *ireq); extern enum sci_status -scic_sds_io_request_tc_completion(struct isci_request *ireq, u32 code); +sci_io_request_tc_completion(struct isci_request *ireq, u32 code); /* XXX open code in caller */ static inline dma_addr_t -scic_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr) +sci_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr) { char *requested_addr = (char *)virt_addr; @@ -500,17 +500,17 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide void isci_terminate_pending_requests(struct isci_host *ihost, struct isci_remote_device *idev); enum sci_status -scic_task_request_construct(struct isci_host *ihost, +sci_task_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, u16 io_tag, struct isci_request *ireq); enum sci_status -scic_task_request_construct_ssp(struct isci_request *ireq); +sci_task_request_construct_ssp(struct isci_request *ireq); enum sci_status -scic_task_request_construct_sata(struct isci_request *ireq); +sci_task_request_construct_sata(struct isci_request *ireq); void -scic_stp_io_request_set_ncq_tag(struct isci_request *ireq, u16 ncq_tag); -void scic_sds_smp_request_copy_response(struct isci_request *ireq); +sci_stp_io_request_set_ncq_tag(struct isci_request *ireq, u16 ncq_tag); +void sci_smp_request_copy_response(struct isci_request *ireq); static inline int isci_task_is_ncq_recovery(struct sas_task *task) { diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index 87d8cc1..47b96c2 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -116,7 +116,7 @@ void isci_sata_set_ncq_tag( struct isci_request *request = task->lldd_task; register_fis->sector_count = qc->tag << 3; - scic_stp_io_request_set_ncq_tag(request, qc->tag); + sci_stp_io_request_set_ncq_tag(request, qc->tag); } /** @@ -187,7 +187,7 @@ enum sci_status isci_sata_management_task_request_build(struct isci_request *ire /* core builds the protocol specific request * based on the h2d fis. */ - status = scic_task_request_construct_sata(ireq); + status = sci_task_request_construct_sata(ireq); return status; } diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 3a1fc55..d040aa2 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -257,12 +257,12 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return NULL; /* let the core do it's construct. */ - status = scic_task_request_construct(ihost, idev, tag, + status = sci_task_request_construct(ihost, idev, tag, ireq); if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, - "%s: scic_task_request_construct failed - " + "%s: sci_task_request_construct failed - " "status = 0x%x\n", __func__, status); @@ -272,7 +272,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, /* XXX convert to get this from task->tproto like other drivers */ if (dev->dev_type == SAS_END_DEV) { isci_tmf->proto = SAS_PROTOCOL_SSP; - status = scic_task_request_construct_ssp(ireq); + status = sci_task_request_construct_ssp(ireq); if (status != SCI_SUCCESS) return NULL; } @@ -332,7 +332,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, spin_lock_irqsave(&ihost->scic_lock, flags); /* start the TMF io. */ - status = scic_controller_start_task(ihost, idev, ireq); + status = sci_controller_start_task(ihost, idev, ireq); if (status != SCI_TASK_SUCCESS) { dev_warn(&ihost->pdev->dev, @@ -364,7 +364,7 @@ int isci_task_execute_tmf(struct isci_host *ihost, if (tmf->cb_state_func != NULL) tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); - scic_controller_terminate_request(ihost, + sci_controller_terminate_request(ihost, idev, ireq); @@ -556,7 +556,7 @@ static void isci_terminate_request_core(struct isci_host *ihost, if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { was_terminated = true; needs_cleanup_handling = true; - status = scic_controller_terminate_request(ihost, + status = sci_controller_terminate_request(ihost, idev, isci_request); } @@ -569,7 +569,7 @@ static void isci_terminate_request_core(struct isci_host *ihost, */ if (status != SCI_SUCCESS) { dev_err(&ihost->pdev->dev, - "%s: scic_controller_terminate_request" + "%s: sci_controller_terminate_request" " returned = 0x%x\n", __func__, status); @@ -1251,7 +1251,7 @@ isci_task_request_complete(struct isci_host *ihost, /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ tmf_complete = tmf->complete; - scic_controller_complete_io(ihost, ireq->target_device, ireq); + sci_controller_complete_io(ihost, ireq->target_device, ireq); /* set the 'terminated' flag handle to make sure it cannot be terminated * or completed again. */ @@ -1514,12 +1514,12 @@ static int isci_reset_device(struct isci_host *ihost, dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_reset(idev); + status = sci_remote_device_reset(idev); if (status != SCI_SUCCESS) { spin_unlock_irqrestore(&ihost->scic_lock, flags); dev_warn(&ihost->pdev->dev, - "%s: scic_remote_device_reset(%p) returned %d!\n", + "%s: sci_remote_device_reset(%p) returned %d!\n", __func__, idev, status); return TMF_RESP_FUNC_FAILED; @@ -1540,7 +1540,7 @@ static int isci_reset_device(struct isci_host *ihost, /* Since all pending TCs have been cleaned, resume the RNC. */ spin_lock_irqsave(&ihost->scic_lock, flags); - status = scic_remote_device_reset_complete(idev); + status = sci_remote_device_reset_complete(idev); spin_unlock_irqrestore(&ihost->scic_lock, flags); /* If this is a device on an expander, bring the phy back up. */ @@ -1560,7 +1560,7 @@ static int isci_reset_device(struct isci_host *ihost, if (status != SCI_SUCCESS) { dev_warn(&ihost->pdev->dev, - "%s: scic_remote_device_reset_complete(%p) " + "%s: sci_remote_device_reset_complete(%p) " "returned %d!\n", __func__, idev, status); } diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c index a0e6f89..e9e1e2a 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.c +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -57,10 +57,10 @@ #include "unsolicited_frame_control.h" #include "registers.h" -int scic_sds_unsolicited_frame_control_construct(struct isci_host *ihost) +int sci_unsolicited_frame_control_construct(struct isci_host *ihost) { - struct scic_sds_unsolicited_frame_control *uf_control = &ihost->uf_control; - struct scic_sds_unsolicited_frame *uf; + struct sci_unsolicited_frame_control *uf_control = &ihost->uf_control; + struct sci_unsolicited_frame *uf; u32 buf_len, header_len, i; dma_addr_t dma; size_t size; @@ -139,23 +139,14 @@ int scic_sds_unsolicited_frame_control_construct(struct isci_host *ihost) return 0; } -/** - * This method returns the frame header for the specified frame index. - * @uf_control: - * @frame_index: - * @frame_header: - * - * enum sci_status - */ -enum sci_status scic_sds_unsolicited_frame_control_get_header( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index, - void **frame_header) +enum sci_status sci_unsolicited_frame_control_get_header(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header) { if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { - /* - * Skip the first word in the frame since this is a controll word used - * by the hardware. */ + /* Skip the first word in the frame since this is a controll word used + * by the hardware. + */ *frame_header = &uf_control->buffers.array[frame_index].header->data; return SCI_SUCCESS; @@ -164,18 +155,9 @@ enum sci_status scic_sds_unsolicited_frame_control_get_header( return SCI_FAILURE_INVALID_PARAMETER_VALUE; } -/** - * This method returns the frame buffer for the specified frame index. - * @uf_control: - * @frame_index: - * @frame_buffer: - * - * enum sci_status - */ -enum sci_status scic_sds_unsolicited_frame_control_get_buffer( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index, - void **frame_buffer) +enum sci_status sci_unsolicited_frame_control_get_buffer(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer) { if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { *frame_buffer = uf_control->buffers.array[frame_index].buffer; @@ -186,19 +168,8 @@ enum sci_status scic_sds_unsolicited_frame_control_get_buffer( return SCI_FAILURE_INVALID_PARAMETER_VALUE; } -/** - * This method releases the frame once this is done the frame is available for - * re-use by the hardware. The data contained in the frame header and frame - * buffer is no longer valid. - * @uf_control: This parameter specifies the UF control object - * @frame_index: This parameter specifies the frame index to attempt to release. - * - * This method returns an indication to the caller as to whether the - * unsolicited frame get pointer should be updated. - */ -bool scic_sds_unsolicited_frame_control_release_frame( - struct scic_sds_unsolicited_frame_control *uf_control, - u32 frame_index) +bool sci_unsolicited_frame_control_release_frame(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index) { u32 frame_get; u32 frame_cycle; diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h index c0285a3..b849a84a 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.h +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -92,12 +92,12 @@ enum unsolicited_frame_state { }; /** - * struct scic_sds_unsolicited_frame - + * struct sci_unsolicited_frame - * * This is the unsolicited frame data structure it acts as the container for * the current frame state, frame header and frame buffer. */ -struct scic_sds_unsolicited_frame { +struct sci_unsolicited_frame { /** * This field contains the current frame state */ @@ -116,11 +116,11 @@ struct scic_sds_unsolicited_frame { }; /** - * struct scic_sds_uf_header_array - + * struct sci_uf_header_array - * * This structure contains all of the unsolicited frame header information. */ -struct scic_sds_uf_header_array { +struct sci_uf_header_array { /** * This field is represents a virtual pointer to the start * address of the UF address table. The table contains @@ -137,19 +137,19 @@ struct scic_sds_uf_header_array { }; /** - * struct scic_sds_uf_buffer_array - + * struct sci_uf_buffer_array - * * This structure contains all of the unsolicited frame buffer (actual payload) * information. */ -struct scic_sds_uf_buffer_array { +struct sci_uf_buffer_array { /** * This field is the unsolicited frame data its used to manage * the data for the unsolicited frame requests. It also represents * the virtual address location that corresponds to the * physical_address field. */ - struct scic_sds_unsolicited_frame array[SCU_MAX_UNSOLICITED_FRAMES]; + struct sci_unsolicited_frame array[SCU_MAX_UNSOLICITED_FRAMES]; /** * This field specifies the physical address location for the UF @@ -159,13 +159,13 @@ struct scic_sds_uf_buffer_array { }; /** - * struct scic_sds_uf_address_table_array - + * struct sci_uf_address_table_array - * * This object maintains all of the unsolicited frame address table specific * data. The address table is a collection of 64-bit pointers that point to * 1KB buffers into which the silicon will DMA unsolicited frames. */ -struct scic_sds_uf_address_table_array { +struct sci_uf_address_table_array { /** * This field represents a virtual pointer that refers to the * starting address of the UF address table. @@ -182,11 +182,11 @@ struct scic_sds_uf_address_table_array { }; /** - * struct scic_sds_unsolicited_frame_control - + * struct sci_unsolicited_frame_control - * * This object contains all of the data necessary to handle unsolicited frames. */ -struct scic_sds_unsolicited_frame_control { +struct sci_unsolicited_frame_control { /** * This field is the software copy of the unsolicited frame queue * get pointer. The controller object writes this value to the @@ -198,38 +198,38 @@ struct scic_sds_unsolicited_frame_control { * This field contains all of the unsolicited frame header * specific fields. */ - struct scic_sds_uf_header_array headers; + struct sci_uf_header_array headers; /** * This field contains all of the unsolicited frame buffer * specific fields. */ - struct scic_sds_uf_buffer_array buffers; + struct sci_uf_buffer_array buffers; /** * This field contains all of the unsolicited frame address table * specific fields. */ - struct scic_sds_uf_address_table_array address_table; + struct sci_uf_address_table_array address_table; }; struct isci_host; -int scic_sds_unsolicited_frame_control_construct(struct isci_host *ihost); +int sci_unsolicited_frame_control_construct(struct isci_host *ihost); -enum sci_status scic_sds_unsolicited_frame_control_get_header( - struct scic_sds_unsolicited_frame_control *uf_control, +enum sci_status sci_unsolicited_frame_control_get_header( + struct sci_unsolicited_frame_control *uf_control, u32 frame_index, void **frame_header); -enum sci_status scic_sds_unsolicited_frame_control_get_buffer( - struct scic_sds_unsolicited_frame_control *uf_control, +enum sci_status sci_unsolicited_frame_control_get_buffer( + struct sci_unsolicited_frame_control *uf_control, u32 frame_index, void **frame_buffer); -bool scic_sds_unsolicited_frame_control_release_frame( - struct scic_sds_unsolicited_frame_control *uf_control, +bool sci_unsolicited_frame_control_release_frame( + struct sci_unsolicited_frame_control *uf_control, u32 frame_index); #endif /* _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ */ -- cgit v0.10.2 From 34a991587a5cc9f78960c2c9beea217866458c41 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 1 Jul 2011 02:25:15 -0700 Subject: isci: kill 'get/set' macros Most of these simple dereference macros are longer than their open coded equivalent. Deleting enum sci_controller_mode is thrown in for good measure. Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index f31f64e..88e7313 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -2627,7 +2627,7 @@ enum sci_status sci_controller_start_io(struct isci_host *ihost, return status; set_bit(IREQ_ACTIVE, &ireq->flags); - sci_controller_post_request(ihost, sci_request_get_post_context(ireq)); + sci_controller_post_request(ihost, ireq->post_context); return SCI_SUCCESS; } @@ -2707,7 +2707,7 @@ enum sci_status sci_controller_continue_io(struct isci_request *ireq) } set_bit(IREQ_ACTIVE, &ireq->flags); - sci_controller_post_request(ihost, sci_request_get_post_context(ireq)); + sci_controller_post_request(ihost, ireq->post_context); return SCI_SUCCESS; } @@ -2747,9 +2747,7 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost, return SCI_SUCCESS; case SCI_SUCCESS: set_bit(IREQ_ACTIVE, &ireq->flags); - - sci_controller_post_request(ihost, - sci_request_get_post_context(ireq)); + sci_controller_post_request(ihost, ireq->post_context); break; default: break; diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index d87f21d..a72d2be 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -172,6 +172,7 @@ struct isci_host { /* XXX kill */ bool phy_startup_timer_pending; u32 next_phy_to_start; + /* XXX convert to unsigned long and use bitops */ u8 invalid_phy_mask; /* TODO attempt dynamic interrupt coalescing scheme */ @@ -359,13 +360,8 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev) return dev->port->ha->lldd_ha; } -/** - * sci_controller_get_protocol_engine_group() - - * - * This macro returns the protocol engine group for this controller object. - * Presently we only support protocol engine group 0 so just return that - */ -#define sci_controller_get_protocol_engine_group(controller) 0 +/* we always use protocol engine group zero */ +#define ISCI_PEG 0 /* see sci_controller_io_tag_allocate|free for how seq and tci are built */ #define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci) @@ -386,16 +382,6 @@ static inline int sci_remote_device_node_count(struct isci_remote_device *idev) } /** - * sci_controller_set_invalid_phy() - - * - * This macro will set the bit in the invalid phy mask for this controller - * object. This is used to control messages reported for invalid link up - * notifications. - */ -#define sci_controller_set_invalid_phy(controller, phy) \ - ((controller)->invalid_phy_mask |= (1 << (phy)->phy_index)) - -/** * sci_controller_clear_invalid_phy() - * * This macro will clear the bit in the invalid phy mask for this controller diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h index 3afccfc..d1de633 100644 --- a/drivers/scsi/isci/isci.h +++ b/drivers/scsi/isci/isci.h @@ -73,11 +73,6 @@ #define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF -enum sci_controller_mode { - SCI_MODE_SPEED, - SCI_MODE_SIZE /* deprecated */ -}; - #define SCI_MAX_PHYS (4UL) #define SCI_MAX_PORTS SCI_MAX_PHYS #define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 0df9f71..e56080a 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -265,10 +265,11 @@ done: * port (i.e. it's contained in the dummy port). !NULL All other * values indicate a handle/pointer to the port containing the phy. */ -struct isci_port *phy_get_non_dummy_port( - struct isci_phy *iphy) +struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy) { - if (sci_port_get_index(iphy->owning_port) == SCIC_SDS_DUMMY_PORT) + struct isci_port *iport = iphy->owning_port; + + if (iport->physical_port_index == SCIC_SDS_DUMMY_PORT) return NULL; return iphy->owning_port; @@ -858,10 +859,9 @@ enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index) struct dev_to_host_fis *frame_header; u32 *fis_frame_data; - result = sci_unsolicited_frame_control_get_header( - &(sci_phy_get_controller(iphy)->uf_control), - frame_index, - (void **)&frame_header); + result = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); if (result != SCI_SUCCESS) return result; @@ -1090,6 +1090,8 @@ static void scu_link_layer_tx_hard_reset( static void sci_phy_stopped_state_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; /* * @todo We need to get to the controller to place this PE in a @@ -1100,14 +1102,14 @@ static void sci_phy_stopped_state_enter(struct sci_base_state_machine *sm) scu_link_layer_stop_protocol_engine(iphy); if (iphy->sm.previous_state_id != SCI_PHY_INITIAL) - sci_controller_link_down(sci_phy_get_controller(iphy), - phy_get_non_dummy_port(iphy), - iphy); + sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy); } static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; scu_link_layer_stop_protocol_engine(iphy); scu_link_layer_start_oob(iphy); @@ -1117,9 +1119,7 @@ static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm) iphy->bcn_received_while_port_unassigned = false; if (iphy->sm.previous_state_id == SCI_PHY_READY) - sci_controller_link_down(sci_phy_get_controller(iphy), - phy_get_non_dummy_port(iphy), - iphy); + sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy); sci_change_state(&iphy->sm, SCI_PHY_SUB_INITIAL); } @@ -1127,11 +1127,10 @@ static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm) static void sci_phy_ready_state_enter(struct sci_base_state_machine *sm) { struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; - sci_controller_link_up(sci_phy_get_controller(iphy), - phy_get_non_dummy_port(iphy), - iphy); - + sci_controller_link_up(ihost, phy_get_non_dummy_port(iphy), iphy); } static void sci_phy_ready_state_exit(struct sci_base_state_machine *sm) diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 5d2c1b4..67699c8 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -440,23 +440,6 @@ enum sci_phy_states { SCI_PHY_FINAL, }; -/** - * sci_phy_get_index() - - * - * This macro returns the phy index for the specified phy - */ -#define sci_phy_get_index(phy) \ - ((phy)->phy_index) - -/** - * sci_phy_get_controller() - This macro returns the controller for this - * phy - * - * - */ -#define sci_phy_get_controller(phy) \ - (sci_port_get_controller((phy)->owning_port)) - void sci_phy_construct( struct isci_phy *iphy, struct isci_port *iport, diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 1822ed6..8f6f9b7 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -654,7 +654,7 @@ static void sci_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, bool do_notify_user) { - struct isci_host *ihost = sci_port_get_controller(iport); + struct isci_host *ihost = iport->owning_controller; iport->active_phy_mask &= ~(1 << iphy->phy_index); @@ -678,7 +678,7 @@ static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *i * invalid link. */ if ((ihost->invalid_phy_mask & (1 << iphy->phy_index)) == 0) { - sci_controller_set_invalid_phy(ihost, iphy); + ihost->invalid_phy_mask |= 1 << iphy->phy_index; dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); } } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 4c4ab81..b50ecd4 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -210,23 +210,6 @@ enum sci_port_states { }; -/** - * sci_port_get_controller() - - * - * Helper macro to get the owning controller of this port - */ -#define sci_port_get_controller(this_port) \ - ((this_port)->owning_controller) - -/** - * sci_port_get_index() - - * - * This macro returns the physical port index for this port object - */ -#define sci_port_get_index(this_port) \ - ((this_port)->physical_port_index) - - static inline void sci_port_decrement_request_count(struct isci_port *iport) { if (WARN_ONCE(iport->started_request_count == 0, diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c index c8b16db..486b113 100644 --- a/drivers/scsi/isci/port_config.c +++ b/drivers/scsi/isci/port_config.c @@ -367,10 +367,10 @@ static void sci_mpc_agent_link_up(struct isci_host *ihost, if (!iport) return; - port_agent->phy_ready_mask |= (1 << sci_phy_get_index(iphy)); + port_agent->phy_ready_mask |= (1 << iphy->phy_index); sci_port_link_up(iport, iphy); - if ((iport->active_phy_mask & (1 << sci_phy_get_index(iphy)))) - port_agent->phy_configured_mask |= (1 << sci_phy_get_index(iphy)); + if ((iport->active_phy_mask & (1 << iphy->phy_index))) + port_agent->phy_configured_mask |= (1 << iphy->phy_index); } /** @@ -404,10 +404,8 @@ static void sci_mpc_agent_link_down( * rebuilding the port with the phys that remain in the ready * state. */ - port_agent->phy_ready_mask &= - ~(1 << sci_phy_get_index(iphy)); - port_agent->phy_configured_mask &= - ~(1 << sci_phy_get_index(iphy)); + port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); /* * Check to see if there are more phys waiting to be @@ -643,7 +641,7 @@ static void sci_apc_agent_link_down( struct isci_port *iport, struct isci_phy *iphy) { - port_agent->phy_ready_mask &= ~(1 << sci_phy_get_index(iphy)); + port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); if (!iport) return; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 8c752ab..85e54f5 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -456,7 +456,7 @@ static void sci_remote_device_start_request(struct isci_remote_device *idev, sci_port_complete_io(iport, idev, ireq); else { kref_get(&idev->kref); - sci_remote_device_increment_request_count(idev); + idev->started_request_count++; } } @@ -636,7 +636,7 @@ enum sci_status sci_remote_device_complete_io(struct isci_host *ihost, * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". */ sci_change_state(sm, SCI_STP_DEV_AWAIT_RESET); - } else if (sci_remote_device_get_request_count(idev) == 0) + } else if (idev->started_request_count == 0) sci_change_state(sm, SCI_STP_DEV_IDLE); break; case SCI_SMP_DEV_CMD: @@ -650,10 +650,10 @@ enum sci_status sci_remote_device_complete_io(struct isci_host *ihost, if (status != SCI_SUCCESS) break; - if (sci_remote_device_get_request_count(idev) == 0) + if (idev->started_request_count == 0) sci_remote_node_context_destruct(&idev->rnc, - rnc_destruct_done, - idev); + rnc_destruct_done, + idev); break; } @@ -761,26 +761,17 @@ enum sci_status sci_remote_device_start_task(struct isci_host *ihost, return status; } -/** - * - * @sci_dev: - * @request: - * - * This method takes the request and bulids an appropriate SCU context for the - * request and then requests the controller to post the request. none - */ -void sci_remote_device_post_request( - struct isci_remote_device *idev, - u32 request) +void sci_remote_device_post_request(struct isci_remote_device *idev, u32 request) { + struct isci_port *iport = idev->owning_port; u32 context; - context = sci_remote_device_build_command_context(idev, request); + context = request | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + idev->rnc.remote_node_index; - sci_controller_post_request( - sci_remote_device_get_controller(idev), - context - ); + sci_controller_post_request(iport->owning_controller, context); } /* called once the remote node context has transisitioned to a @@ -893,7 +884,7 @@ static void sci_remote_device_stopped_state_enter(struct sci_base_state_machine static void sci_remote_device_starting_state_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = sci_remote_device_get_controller(idev); + struct isci_host *ihost = idev->owning_port->owning_controller; isci_remote_device_not_ready(ihost, idev, SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); @@ -961,7 +952,7 @@ static void sci_stp_remote_device_ready_idle_substate_enter(struct sci_base_stat static void sci_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = sci_remote_device_get_controller(idev); + struct isci_host *ihost = idev->owning_port->owning_controller; BUG_ON(idev->working_request == NULL); @@ -972,7 +963,7 @@ static void sci_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state static void sci_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = sci_remote_device_get_controller(idev); + struct isci_host *ihost = idev->owning_port->owning_controller; if (idev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) isci_remote_device_not_ready(ihost, idev, @@ -982,7 +973,7 @@ static void sci_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base static void sci_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = sci_remote_device_get_controller(idev); + struct isci_host *ihost = idev->owning_port->owning_controller; isci_remote_device_ready(ihost, idev); } @@ -990,7 +981,7 @@ static void sci_smp_remote_device_ready_idle_substate_enter(struct sci_base_stat static void sci_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) { struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); - struct isci_host *ihost = sci_remote_device_get_controller(idev); + struct isci_host *ihost = idev->owning_port->owning_controller; BUG_ON(idev->working_request == NULL); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index fa9a0e6..57ccfc3 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -305,91 +305,18 @@ static inline bool dev_is_expander(struct domain_device *dev) return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; } -/** - * sci_remote_device_increment_request_count() - - * - * This macro incrments the request count for this device - */ -#define sci_remote_device_increment_request_count(idev) \ - ((idev)->started_request_count++) - -/** - * sci_remote_device_decrement_request_count() - - * - * This macro decrements the request count for this device. This count will - * never decrment past 0. - */ -#define sci_remote_device_decrement_request_count(idev) \ - ((idev)->started_request_count > 0 ? \ - (idev)->started_request_count-- : 0) - -/** - * sci_remote_device_get_request_count() - - * - * This is a helper macro to return the current device request count. - */ -#define sci_remote_device_get_request_count(idev) \ - ((idev)->started_request_count) - -/** - * sci_remote_device_get_controller() - - * - * This macro returns the controller object that contains this device object - */ -#define sci_remote_device_get_controller(idev) \ - sci_port_get_controller(sci_remote_device_get_port(idev)) - -/** - * sci_remote_device_get_port() - - * - * This macro returns the owning port of this device - */ -#define sci_remote_device_get_port(idev) \ - ((idev)->owning_port) - -/** - * sci_remote_device_get_controller_peg() - - * - * This macro returns the controllers protocol engine group - */ -#define sci_remote_device_get_controller_peg(idev) \ - (\ - sci_controller_get_protocol_engine_group(\ - sci_port_get_controller(\ - sci_remote_device_get_port(idev) \ - ) \ - ) \ - ) - -/** - * sci_remote_device_get_index() - - * - * This macro returns the remote node index for this device object - */ -#define sci_remote_device_get_index(idev) \ - ((idev)->rnc.remote_node_index) - -/** - * sci_remote_device_build_command_context() - - * - * This macro builds a remote device context for the SCU post request operation - */ -#define sci_remote_device_build_command_context(device, command) \ - ((command) \ - | (sci_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ - | ((device)->owning_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ - | (sci_remote_device_get_index((device))) \ - ) - -/** - * sci_remote_device_set_working_request() - - * - * This macro makes the working request assingment for the remote device - * object. To clear the working request use this macro with a NULL request - * object. - */ -#define sci_remote_device_set_working_request(device, request) \ - ((device)->working_request = (request)) +static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev) +{ + /* XXX delete this voodoo when converting to the top-level device + * reference count + */ + if (WARN_ONCE(idev->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + idev->started_request_count--; +} enum sci_status sci_remote_device_frame_handler( struct isci_remote_device *idev, diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index c2dfd5a..748e833 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -111,7 +111,7 @@ static void sci_remote_node_context_construct_buffer(struct sci_remote_node_cont struct isci_host *ihost; __le64 sas_addr; - ihost = sci_remote_device_get_controller(idev); + ihost = idev->owning_port->owning_controller; rnc = sci_rnc_by_id(ihost, rni); memset(rnc, 0, sizeof(union scu_remote_node_context) diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index b475c5c..41580ad 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -204,9 +204,6 @@ void sci_remote_node_context_construct(struct sci_remote_node_context *rnc, bool sci_remote_node_context_is_ready( struct sci_remote_node_context *sci_rnc); -#define sci_remote_node_context_get_remote_node_index(rcn) \ - ((rnc)->remote_node_index) - enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc, u32 event_code); enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc, diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index bcb3c08..7c500bb 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -211,22 +211,21 @@ static void scu_ssp_reqeust_construct_task_context( struct isci_remote_device *idev; struct isci_port *iport; - idev = sci_request_get_device(ireq); - iport = sci_request_get_port(ireq); + idev = ireq->target_device; + iport = idev->owning_port; /* Fill in the TC with the its required data */ task_context->abort = 0; task_context->priority = 0; task_context->initiator_request = 1; task_context->connection_rate = idev->connection_rate; - task_context->protocol_engine_index = - sci_controller_get_protocol_engine_group(controller); - task_context->logical_port_index = sci_port_get_index(iport); + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; - task_context->remote_node_index = sci_remote_device_get_index(idev); + task_context->remote_node_index = idev->rnc.remote_node_index; task_context->command_code = 0; task_context->link_layer_control = 0; @@ -242,9 +241,8 @@ static void scu_ssp_reqeust_construct_task_context( task_context->task_phase = 0x01; ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (sci_controller_get_protocol_engine_group(controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (sci_port_get_index(iport) << + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | ISCI_TAG_TCI(ireq->io_tag)); @@ -349,23 +347,21 @@ static void scu_sata_reqeust_construct_task_context( struct isci_remote_device *idev; struct isci_port *iport; - idev = sci_request_get_device(ireq); - iport = sci_request_get_port(ireq); + idev = ireq->target_device; + iport = idev->owning_port; /* Fill in the TC with the its required data */ task_context->abort = 0; task_context->priority = SCU_TASK_PRIORITY_NORMAL; task_context->initiator_request = 1; task_context->connection_rate = idev->connection_rate; - task_context->protocol_engine_index = - sci_controller_get_protocol_engine_group(controller); - task_context->logical_port_index = - sci_port_get_index(iport); + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; task_context->valid = SCU_TASK_CONTEXT_VALID; task_context->context_type = SCU_TASK_CONTEXT_TYPE; - task_context->remote_node_index = sci_remote_device_get_index(idev); + task_context->remote_node_index = idev->rnc.remote_node_index; task_context->command_code = 0; task_context->link_layer_control = 0; @@ -385,11 +381,10 @@ static void scu_sata_reqeust_construct_task_context( task_context->type.words[0] = *(u32 *)&ireq->stp.cmd; ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (sci_controller_get_protocol_engine_group(controller) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (sci_port_get_index(iport) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(ireq->io_tag)); + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); /* * Copy the physical address for the command buffer to the SCU Task * Context. We must offset the command buffer by 4 bytes because the @@ -716,10 +711,8 @@ sci_io_request_terminate(struct isci_request *ireq) switch (state) { case SCI_REQ_CONSTRUCTED: - sci_request_set_status(ireq, - SCU_TASK_DONE_TASK_ABORT, - SCI_FAILURE_IO_TERMINATED); - + ireq->scu_status = SCU_TASK_DONE_TASK_ABORT; + ireq->sci_status = SCI_FAILURE_IO_TERMINATED; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; case SCI_REQ_STARTED: @@ -848,9 +841,8 @@ request_started_state_tc_event(struct isci_request *ireq, */ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - sci_request_set_status(ireq, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS); + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): { /* There are times when the SCU hardware will return an early @@ -868,13 +860,11 @@ request_started_state_tc_event(struct isci_request *ireq, word_cnt); if (resp->status == 0) { - sci_request_set_status(ireq, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS_IO_DONE_EARLY); + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY; } else { - sci_request_set_status(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; } break; } @@ -885,9 +875,8 @@ request_started_state_tc_event(struct isci_request *ireq, &ireq->ssp.rsp, word_cnt); - sci_request_set_status(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; break; } @@ -900,13 +889,12 @@ request_started_state_tc_event(struct isci_request *ireq, datapres = resp_iu->datapres; if (datapres == 1 || datapres == 2) { - sci_request_set_status(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - } else - sci_request_set_status(ireq, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS); + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } break; /* only stp device gets suspended. */ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): @@ -921,15 +909,13 @@ request_started_state_tc_event(struct isci_request *ireq, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): if (ireq->protocol == SCIC_STP_PROTOCOL) { - sci_request_set_status(ireq, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; } else { - sci_request_set_status(ireq, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; } break; @@ -944,10 +930,9 @@ request_started_state_tc_event(struct isci_request *ireq, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): - sci_request_set_status(ireq, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED); + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; break; /* neither ssp nor stp gets suspended. */ @@ -967,11 +952,9 @@ request_started_state_tc_event(struct isci_request *ireq, case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): default: - sci_request_set_status( - ireq, - SCU_GET_COMPLETION_TL_STATUS(completion_code) >> - SCU_COMPLETION_TL_STATUS_SHIFT, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; break; } @@ -991,9 +974,8 @@ request_aborting_state_tc_event(struct isci_request *ireq, switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): - sci_request_set_status(ireq, SCU_TASK_DONE_TASK_ABORT, - SCI_FAILURE_IO_TERMINATED); - + ireq->scu_status = SCU_TASK_DONE_TASK_ABORT; + ireq->sci_status = SCI_FAILURE_IO_TERMINATED; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; @@ -1012,9 +994,8 @@ static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): @@ -1036,10 +1017,8 @@ static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq * If a NAK was received, then it is up to the user to retry * the request. */ - sci_request_set_status(ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1057,12 +1036,10 @@ smp_request_await_response_tc_event(struct isci_request *ireq, * unexpected. but if the TC has success status, we * complete the IO anyway. */ - sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): @@ -1074,20 +1051,16 @@ smp_request_await_response_tc_event(struct isci_request *ireq, * these SMP_XXX_XX_ERR status. For these type of error, * we ask ihost user to retry the request. */ - sci_request_set_status(ireq, SCU_TASK_DONE_SMP_RESP_TO_ERR, - SCI_FAILURE_RETRY_REQUIRED); - + ireq->scu_status = SCU_TASK_DONE_SMP_RESP_TO_ERR; + ireq->sci_status = SCI_FAILURE_RETRY_REQUIRED; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; - default: /* All other completion status cause the IO to be complete. If a NAK * was received, then it is up to the user to retry the request */ - sci_request_set_status(ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1101,9 +1074,8 @@ smp_request_await_tc_event(struct isci_request *ireq, { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; default: @@ -1111,10 +1083,8 @@ smp_request_await_tc_event(struct isci_request *ireq, * complete. If a NAK was received, then it is up to * the user to retry the request. */ - sci_request_set_status(ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1171,9 +1141,8 @@ stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; sci_change_state(&ireq->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H); break; @@ -1182,10 +1151,8 @@ stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, * complete. If a NAK was received, then it is up to * the user to retry the request. */ - sci_request_set_status(ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1363,10 +1330,8 @@ stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq, switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - sci_request_set_status(ireq, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); break; @@ -1375,10 +1340,8 @@ stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq, * complete. If a NAK was received, then it is up to * the user to retry the request. */ - sci_request_set_status(ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1426,11 +1389,8 @@ pio_data_out_tx_done_tc_event(struct isci_request *ireq, * If a NAK was received, then it is up to the user to retry * the request. */ - sci_request_set_status( - ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1438,15 +1398,6 @@ pio_data_out_tx_done_tc_event(struct isci_request *ireq, return status; } -static void sci_stp_request_udma_complete_request( - struct isci_request *ireq, - u32 scu_status, - enum sci_status sci_status) -{ - sci_request_set_status(ireq, scu_status, sci_status); - sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); -} - static enum sci_status sci_stp_request_udma_general_frame_handler(struct isci_request *ireq, u32 frame_index) { @@ -1512,13 +1463,12 @@ sci_io_request_frame_handler(struct isci_request *ireq, if (resp_iu->datapres == 0x01 || resp_iu->datapres == 0x02) { - sci_request_set_status(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - } else - sci_request_set_status(ireq, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS); + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } } else { /* not a response frame, why did it get forwarded? */ dev_err(&ihost->pdev->dev, @@ -1567,9 +1517,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, smp_resp, word_cnt); - sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; sci_change_state(&ireq->sm, SCI_REQ_SMP_WAIT_TC_COMP); } else { /* @@ -1584,10 +1533,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, frame_index, rsp_hdr->frame_type); - sci_request_set_status(ireq, - SCU_TASK_DONE_SMP_FRM_TYPE_ERR, - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_TASK_DONE_SMP_FRM_TYPE_ERR; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } @@ -1602,16 +1549,14 @@ sci_io_request_frame_handler(struct isci_request *ireq, case SCI_REQ_STP_UDMA_WAIT_D2H: /* Use the general frame handler to copy the resposne data */ - status = sci_stp_request_udma_general_frame_handler(ireq, - frame_index); + status = sci_stp_request_udma_general_frame_handler(ireq, frame_index); if (status != SCI_SUCCESS) return status; - sci_stp_request_udma_complete_request(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; case SCI_REQ_STP_NON_DATA_WAIT_D2H: { @@ -1645,8 +1590,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, frame_buffer); /* The command has completed with error */ - sci_request_set_status(ireq, SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; break; default: @@ -1655,8 +1600,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, "violation occurred\n", __func__, stp_req, frame_index); - sci_request_set_status(ireq, SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); + ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS; + ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION; break; } @@ -1753,10 +1698,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, frame_header, frame_buffer); - sci_request_set_status(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; @@ -1800,10 +1743,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, frame_index, frame_header->fis_type); - sci_request_set_status(ireq, - SCU_TASK_DONE_GOOD, - SCI_FAILURE_IO_REQUIRES_SCSI_ABORT); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); /* Frame is decoded return it to the controller */ @@ -1833,10 +1774,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, return status; if ((stp_req->status & ATA_BUSY) == 0) { - sci_request_set_status(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); - + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } else { sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); @@ -1873,9 +1812,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, frame_buffer); /* The command has completed with error */ - sci_request_set_status(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; break; default: @@ -1886,9 +1824,8 @@ sci_io_request_frame_handler(struct isci_request *ireq, stp_req, frame_index); - sci_request_set_status(ireq, - SCU_TASK_DONE_UNEXP_FIS, - SCI_FAILURE_PROTOCOL_VIOLATION); + ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS; + ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION; break; } @@ -1927,9 +1864,9 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - sci_stp_request_udma_complete_request(ireq, - SCU_TASK_DONE_GOOD, - SCI_SUCCESS); + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): @@ -1941,9 +1878,9 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq sci_remote_device_suspend(ireq->target_device, SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); - sci_stp_request_udma_complete_request(ireq, - SCU_TASK_DONE_CHECK_RESPONSE, - SCI_FAILURE_IO_RESPONSE_VALID); + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); } else { /* If we have an error completion status for the * TC then we can expect a D2H register FIS from @@ -1970,9 +1907,9 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq /* Fall through to the default case */ default: /* All other completion status cause the IO to be complete. */ - sci_stp_request_udma_complete_request(ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -1985,9 +1922,8 @@ stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq, { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG); break; @@ -1997,10 +1933,8 @@ stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq, * If a NAK was received, then it is up to the user to retry * the request. */ - sci_request_set_status(ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -2014,9 +1948,8 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, { switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - sci_request_set_status(ireq, SCU_TASK_DONE_GOOD, - SCI_SUCCESS); - + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H); break; @@ -2025,10 +1958,8 @@ stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, * a NAK was received, then it is up to the user to retry the * request. */ - sci_request_set_status(ireq, - SCU_NORMALIZE_COMPLETION_STATUS(completion_code), - SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR); - + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); break; } @@ -2504,7 +2435,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost, completion_status); spin_lock(&request->state_lock); - request_status = isci_request_get_state(request); + request_status = request->status; /* Decode the request status. Note that if the request has been * aborted by a task management function, we don't care @@ -2904,24 +2835,21 @@ static void sci_stp_request_started_non_data_await_h2d_completion_enter(struct s { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - sci_remote_device_set_working_request(ireq->target_device, - ireq); + ireq->target_device->working_request = ireq; } static void sci_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - sci_remote_device_set_working_request(ireq->target_device, - ireq); + ireq->target_device->working_request = ireq; } static void sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) { struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - sci_remote_device_set_working_request(ireq->target_device, - ireq); + ireq->target_device->working_request = ireq; } static void sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) @@ -3141,8 +3069,8 @@ sci_io_request_construct_smp(struct device *dev, task_context = ireq->tc; - idev = sci_request_get_device(ireq); - iport = sci_request_get_port(ireq); + idev = ireq->target_device; + iport = idev->owning_port; /* * Fill in the TC with the its required data @@ -3151,9 +3079,8 @@ sci_io_request_construct_smp(struct device *dev, task_context->priority = 0; task_context->initiator_request = 1; task_context->connection_rate = idev->connection_rate; - task_context->protocol_engine_index = - sci_controller_get_protocol_engine_group(ihost); - task_context->logical_port_index = sci_port_get_index(iport); + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; task_context->abort = 0; task_context->valid = SCU_TASK_CONTEXT_VALID; @@ -3195,11 +3122,10 @@ sci_io_request_construct_smp(struct device *dev, task_context->task_phase = 0; ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | - (sci_controller_get_protocol_engine_group(ihost) << - SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | - (sci_port_get_index(iport) << - SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | - ISCI_TAG_TCI(ireq->io_tag)); + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); /* * Copy the physical address for the command buffer to the SCU Task * Context command buffer should not contain command header. diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 08fcf98..5970840 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -300,58 +300,6 @@ enum sci_base_request_states { SCI_REQ_FINAL, }; -/** - * sci_request_get_controller() - - * - * This macro will return the controller for this io request object - */ -#define sci_request_get_controller(ireq) \ - ((ireq)->owning_controller) - -/** - * sci_request_get_device() - - * - * This macro will return the device for this io request object - */ -#define sci_request_get_device(ireq) \ - ((ireq)->target_device) - -/** - * sci_request_get_port() - - * - * This macro will return the port for this io request object - */ -#define sci_request_get_port(ireq) \ - sci_remote_device_get_port(sci_request_get_device(ireq)) - -/** - * sci_request_get_post_context() - - * - * This macro returns the constructed post context result for the io request. - */ -#define sci_request_get_post_context(ireq) \ - ((ireq)->post_context) - -/** - * sci_request_get_task_context() - - * - * This is a helper macro to return the os handle for this request object. - */ -#define sci_request_get_task_context(request) \ - ((request)->task_context_buffer) - -/** - * sci_request_set_status() - - * - * This macro will set the scu hardware status and sci request completion - * status for an io request. - */ -#define sci_request_set_status(request, scu_status_code, sci_status_code) \ - { \ - (request)->scu_status = (scu_status_code); \ - (request)->sci_status = (sci_status_code); \ - } - enum sci_status sci_request_start(struct isci_request *ireq); enum sci_status sci_io_request_terminate(struct isci_request *ireq); enum sci_status @@ -382,27 +330,6 @@ sci_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr) } /** - * This function gets the status of the request object. - * @request: This parameter points to the isci_request object - * - * status of the object as a isci_request_status enum. - */ -static inline enum isci_request_status -isci_request_get_state(struct isci_request *isci_request) -{ - BUG_ON(isci_request == NULL); - - /*probably a bad sign... */ - if (isci_request->status == unallocated) - dev_warn(&isci_request->isci_host->pdev->dev, - "%s: isci_request->status == unallocated\n", - __func__); - - return isci_request->status; -} - - -/** * isci_request_change_state() - This function sets the status of the request * object. * @request: This parameter points to the isci_request object diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index d040aa2..20112cd 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -654,7 +654,7 @@ static void isci_terminate_request_core(struct isci_host *ihost, * needs to be detached and freed here. */ spin_lock_irqsave(&isci_request->state_lock, flags); - request_status = isci_request_get_state(isci_request); + request_status = isci_request->status; if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ && ((request_status == aborted) -- cgit v0.10.2 From 16ba77091b44af28b3ff3318b4a2aa4fbf7d4c24 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 1 Jul 2011 10:52:55 -0700 Subject: isci: merge sata.[ch] into request.c Undo some needless separation. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 4244970..3359e10 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_SCSI_ISCI) += isci.o -isci-objs := init.o phy.o request.o sata.o \ +isci-objs := init.o phy.o request.o \ remote_device.o port.o \ host.o task.o probe_roms.o \ remote_node_context.o \ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 7c500bb..33c8ed1 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -56,7 +56,6 @@ #include "isci.h" #include "task.h" #include "request.h" -#include "sata.h" #include "scu_completion_codes.h" #include "scu_event_codes.h" #include "sas.h" @@ -1092,16 +1091,6 @@ smp_request_await_tc_event(struct isci_request *ireq, return SCI_SUCCESS; } -void sci_stp_io_request_set_ncq_tag(struct isci_request *ireq, - u16 ncq_tag) -{ - /** - * @note This could be made to return an error to the user if the user - * attempts to set the NCQ tag in the wrong state. - */ - ireq->tc->type.stp.ncq_tag = ncq_tag; -} - static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req) { struct scu_sgl_element *sgl; @@ -2410,6 +2399,29 @@ static void isci_task_save_for_upper_layer_completion( } } +static void isci_request_process_stp_response(struct sas_task *task, + void *response_buffer) +{ + struct dev_to_host_fis *d2h_reg_fis = response_buffer; + struct task_status_struct *ts = &task->task_status; + struct ata_task_resp *resp = (void *)&ts->buf[0]; + + resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6)); + memcpy(&resp->ending_fis[0], response_buffer + 16, 24); + ts->buf_valid_size = sizeof(*resp); + + /** + * If the device fault bit is set in the status register, then + * set the sense data and return. + */ + if (d2h_reg_fis->status & ATA_DF) + ts->stat = SAS_PROTO_RESPONSE; + else + ts->stat = SAM_STAT_GOOD; + + ts->resp = SAS_TASK_COMPLETE; +} + static void isci_request_io_request_complete(struct isci_host *ihost, struct isci_request *request, enum sci_io_status completion_status) @@ -2985,34 +2997,29 @@ static enum sci_status isci_request_ssp_request_construct( return status; } -static enum sci_status isci_request_stp_request_construct( - struct isci_request *request) +static enum sci_status isci_request_stp_request_construct(struct isci_request *ireq) { - struct sas_task *task = isci_request_access_task(request); + struct sas_task *task = isci_request_access_task(ireq); + struct host_to_dev_fis *fis = &ireq->stp.cmd; + struct ata_queued_cmd *qc = task->uldd_task; enum sci_status status; - struct host_to_dev_fis *register_fis; - dev_dbg(&request->isci_host->pdev->dev, - "%s: request = %p\n", + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: ireq = %p\n", __func__, - request); - - /* Get the host_to_dev_fis from the core and copy - * the fis from the task into it. - */ - register_fis = isci_sata_task_to_fis_copy(task); + ireq); - status = sci_io_request_construct_basic_sata(request); + memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); + if (!task->ata_task.device_control_reg_update) + fis->flags |= 0x80; + fis->flags &= 0xF0; - /* Set the ncq tag in the fis, from the queue - * command in the task. - */ - if (isci_sata_is_task_ncq(task)) { + status = sci_io_request_construct_basic_sata(ireq); - isci_sata_set_ncq_tag( - register_fis, - task - ); + if (qc && (qc->tf.command == ATA_CMD_FPDMA_WRITE || + qc->tf.command == ATA_CMD_FPDMA_READ)) { + fis->sector_count = qc->tag << 3; + ireq->tc->type.stp.ncq_tag = qc->tag; } return status; diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 5970840..11bc279 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -435,8 +435,6 @@ enum sci_status sci_task_request_construct_ssp(struct isci_request *ireq); enum sci_status sci_task_request_construct_sata(struct isci_request *ireq); -void -sci_stp_io_request_set_ncq_tag(struct isci_request *ireq, u16 ncq_tag); void sci_smp_request_copy_response(struct isci_request *ireq); static inline int isci_task_is_ncq_recovery(struct sas_task *task) diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c deleted file mode 100644 index 47b96c2..0000000 --- a/drivers/scsi/isci/sata.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include "isci.h" -#include "remote_device.h" -#include "task.h" -#include "request.h" -#include "sata.h" - -/** - * isci_sata_task_to_fis_copy() - This function gets the host_to_dev_fis from - * the core and copies the fis from the task into it. - * @task: This parameter is a pointer to the task struct from libsas. - * - * pointer to the host_to_dev_fis from the core request object. - */ -struct host_to_dev_fis *isci_sata_task_to_fis_copy(struct sas_task *task) -{ - struct isci_request *ireq = task->lldd_task; - struct host_to_dev_fis *fis = &ireq->stp.cmd; - - memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); - - if (!task->ata_task.device_control_reg_update) - fis->flags |= 0x80; - - fis->flags &= 0xF0; - - return fis; -} - -/** - * isci_sata_is_task_ncq() - This function determines if the given stp task is - * a ncq request. - * @task: This parameter is a pointer to the task struct from libsas. - * - * true if the task is ncq - */ -bool isci_sata_is_task_ncq(struct sas_task *task) -{ - struct ata_queued_cmd *qc = task->uldd_task; - - bool ret = (qc && - (qc->tf.command == ATA_CMD_FPDMA_WRITE || - qc->tf.command == ATA_CMD_FPDMA_READ)); - - return ret; -} - -/** - * isci_sata_set_ncq_tag() - This function sets the ncq tag field in the - * host_to_dev_fis equal to the tag in the queue command in the task. - * @task: This parameter is a pointer to the task struct from libsas. - * @register_fis: This parameter is a pointer to the host_to_dev_fis from the - * core request object. - * - */ -void isci_sata_set_ncq_tag( - struct host_to_dev_fis *register_fis, - struct sas_task *task) -{ - struct ata_queued_cmd *qc = task->uldd_task; - struct isci_request *request = task->lldd_task; - - register_fis->sector_count = qc->tag << 3; - sci_stp_io_request_set_ncq_tag(request, qc->tag); -} - -/** - * isci_request_process_stp_response() - This function sets the status and - * response, in the task struct, from the request object for the upper layer - * driver. - * @sas_task: This parameter is the task struct from the upper layer driver. - * @response_buffer: This parameter points to the response of the completed - * request. - * - * none. - */ -void isci_request_process_stp_response(struct sas_task *task, - void *response_buffer) -{ - struct dev_to_host_fis *d2h_reg_fis = response_buffer; - struct task_status_struct *ts = &task->task_status; - struct ata_task_resp *resp = (void *)&ts->buf[0]; - - resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6)); - memcpy(&resp->ending_fis[0], response_buffer + 16, 24); - ts->buf_valid_size = sizeof(*resp); - - /** - * If the device fault bit is set in the status register, then - * set the sense data and return. - */ - if (d2h_reg_fis->status & ATA_DF) - ts->stat = SAS_PROTO_RESPONSE; - else - ts->stat = SAM_STAT_GOOD; - - ts->resp = SAS_TASK_COMPLETE; -} - -enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) -{ - struct isci_tmf *isci_tmf; - enum sci_status status; - - if (tmf_task != ireq->ttype) - return SCI_FAILURE; - - isci_tmf = isci_request_access_tmf(ireq); - - switch (isci_tmf->tmf_code) { - - case isci_tmf_sata_srst_high: - case isci_tmf_sata_srst_low: { - struct host_to_dev_fis *fis = &ireq->stp.cmd; - - memset(fis, 0, sizeof(*fis)); - - fis->fis_type = 0x27; - fis->flags &= ~0x80; - fis->flags &= 0xF0; - if (isci_tmf->tmf_code == isci_tmf_sata_srst_high) - fis->control |= ATA_SRST; - else - fis->control &= ~ATA_SRST; - break; - } - /* other management commnd go here... */ - default: - return SCI_FAILURE; - } - - /* core builds the protocol specific request - * based on the h2d fis. - */ - status = sci_task_request_construct_sata(ireq); - - return status; -} - -/** - * isci_task_send_lu_reset_sata() - This function is called by of the SAS - * Domain Template functions. This is one of the Task Management functoins - * called by libsas, to reset the given SAS lun. Note the assumption that - * while this call is executing, no I/O will be sent by the host to the - * device. - * @lun: This parameter specifies the lun to be reset. - * - * status, zero indicates success. - */ -int isci_task_send_lu_reset_sata( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - u8 *lun) -{ - struct isci_tmf tmf; - int ret = TMF_RESP_FUNC_FAILED; - - /* Send the soft reset to the target */ - #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ - isci_task_build_tmf(&tmf, isci_tmf_sata_srst_high, NULL, NULL); - - ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, - ISCI_SRST_TIMEOUT_MS); - - if (ret != TMF_RESP_FUNC_COMPLETE) { - dev_warn(&isci_host->pdev->dev, - "%s: Assert SRST failed (%p) = %x", - __func__, - isci_device, - ret); - - /* Return the failure so that the LUN reset is escalated - * to a target reset. - */ - } - return ret; -} diff --git a/drivers/scsi/isci/sata.h b/drivers/scsi/isci/sata.h deleted file mode 100644 index 1b89f1f..0000000 --- a/drivers/scsi/isci/sata.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -struct host_to_dev_fis *isci_sata_task_to_fis_copy( - struct sas_task *task); - -bool isci_sata_is_task_ncq( - struct sas_task *task); - -void isci_sata_set_ncq_tag( - struct host_to_dev_fis *register_fis, - struct sas_task *task); - -void isci_request_process_stp_response( - struct sas_task *task, - void *response_buffer); - -u8 isci_sata_get_sat_protocol( - struct isci_request *isci_request); - -enum sci_status isci_sata_management_task_request_build( - struct isci_request *isci_request); - -int isci_task_send_lu_reset_sata( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - u8 *lun); diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 20112cd..5d962b6 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -61,7 +61,6 @@ #include "remote_node_context.h" #include "isci.h" #include "request.h" -#include "sata.h" #include "task.h" #include "host.h" @@ -238,6 +237,46 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) return 0; } +static enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) +{ + struct isci_tmf *isci_tmf; + enum sci_status status; + + if (tmf_task != ireq->ttype) + return SCI_FAILURE; + + isci_tmf = isci_request_access_tmf(ireq); + + switch (isci_tmf->tmf_code) { + + case isci_tmf_sata_srst_high: + case isci_tmf_sata_srst_low: { + struct host_to_dev_fis *fis = &ireq->stp.cmd; + + memset(fis, 0, sizeof(*fis)); + + fis->fis_type = 0x27; + fis->flags &= ~0x80; + fis->flags &= 0xF0; + if (isci_tmf->tmf_code == isci_tmf_sata_srst_high) + fis->control |= ATA_SRST; + else + fis->control &= ~ATA_SRST; + break; + } + /* other management commnd go here... */ + default: + return SCI_FAILURE; + } + + /* core builds the protocol specific request + * based on the h2d fis. + */ + status = sci_task_request_construct_sata(ireq); + + return status; +} + static struct isci_request *isci_task_request_build(struct isci_host *ihost, struct isci_remote_device *idev, u16 tag, struct isci_tmf *isci_tmf) @@ -287,9 +326,9 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return ireq; } -int isci_task_execute_tmf(struct isci_host *ihost, - struct isci_remote_device *idev, - struct isci_tmf *tmf, unsigned long timeout_ms) +static int isci_task_execute_tmf(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_tmf *tmf, unsigned long timeout_ms) { DECLARE_COMPLETION_ONSTACK(completion); enum sci_task_status status = SCI_TASK_FAILURE; @@ -401,13 +440,12 @@ int isci_task_execute_tmf(struct isci_host *ihost, return ret; } -void isci_task_build_tmf( - struct isci_tmf *tmf, - enum isci_tmf_function_codes code, - void (*tmf_sent_cb)(enum isci_tmf_cb_state, - struct isci_tmf *, - void *), - void *cb_data) +static void isci_task_build_tmf(struct isci_tmf *tmf, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + void *cb_data) { memset(tmf, 0, sizeof(*tmf)); @@ -416,16 +454,14 @@ void isci_task_build_tmf( tmf->cb_data = cb_data; } -static void isci_task_build_abort_task_tmf( - struct isci_tmf *tmf, - enum isci_tmf_function_codes code, - void (*tmf_sent_cb)(enum isci_tmf_cb_state, - struct isci_tmf *, - void *), - struct isci_request *old_request) +static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + struct isci_request *old_request) { - isci_task_build_tmf(tmf, code, tmf_sent_cb, - (void *)old_request); + isci_task_build_tmf(tmf, code, tmf_sent_cb, old_request); tmf->io_tag = old_request->io_tag; } @@ -804,6 +840,30 @@ static int isci_task_send_lu_reset_sas( return ret; } +static int isci_task_send_lu_reset_sata(struct isci_host *ihost, + struct isci_remote_device *idev, u8 *lun) +{ + int ret = TMF_RESP_FUNC_FAILED; + struct isci_tmf tmf; + + /* Send the soft reset to the target */ + #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ + isci_task_build_tmf(&tmf, isci_tmf_sata_srst_high, NULL, NULL); + + ret = isci_task_execute_tmf(ihost, idev, &tmf, ISCI_SRST_TIMEOUT_MS); + + if (ret != TMF_RESP_FUNC_COMPLETE) { + dev_warn(&ihost->pdev->dev, + "%s: Assert SRST failed (%p) = %x", + __func__, idev, ret); + + /* Return the failure so that the LUN reset is escalated + * to a target reset. + */ + } + return ret; +} + /** * isci_task_lu_reset() - This function is one of the SAS Domain Template * functions. This is one of the Task Management functoins called by libsas, diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 42019de..4a7fa90 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -211,18 +211,6 @@ int isci_queuecommand( int isci_bus_reset_handler(struct scsi_cmnd *cmd); -void isci_task_build_tmf( - struct isci_tmf *tmf, - enum isci_tmf_function_codes code, - void (*tmf_sent_cb)(enum isci_tmf_cb_state, - struct isci_tmf *, - void *), - void *cb_data); - -int isci_task_execute_tmf(struct isci_host *isci_host, - struct isci_remote_device *idev, - struct isci_tmf *tmf, unsigned long timeout_ms); - /** * enum isci_completion_selection - This enum defines the possible actions to * take with respect to a given request's notification back to libsas. -- cgit v0.10.2 From 4e4dca3de9658f364d34924e072f2b64e5c3d267 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 1 Jul 2011 11:15:12 -0700 Subject: isci: merge scu_unsolicited_frame.h into unsolicited_frame_control.h Does not need its own file. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 88e7313..b554ea2 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -67,7 +67,6 @@ #include "registers.h" #include "scu_remote_node_context.h" #include "scu_task_context.h" -#include "scu_unsolicited_frame.h" #define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index a72d2be..ec0bba5 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -60,7 +60,6 @@ #include "isci.h" #include "remote_node_table.h" #include "registers.h" -#include "scu_unsolicited_frame.h" #include "unsolicited_frame_control.h" #include "probe_roms.h" diff --git a/drivers/scsi/isci/scu_unsolicited_frame.h b/drivers/scsi/isci/scu_unsolicited_frame.h deleted file mode 100644 index 187c4f0..0000000 --- a/drivers/scsi/isci/scu_unsolicited_frame.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** - * This field defines the SCU format of an unsolicited frame (UF). A UF is a - * frame received by the SCU for which there is no known corresponding task - * context (TC). - * - * - */ - -#ifndef _SCU_UNSOLICITED_FRAME_H_ -#define _SCU_UNSOLICITED_FRAME_H_ - -#include - -/** - * - * - * This constant defines the number of DWORDS found the unsolicited frame - * header data member. - */ -#define SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS 15 - -/** - * struct scu_unsolicited_frame_header - - * - * This structure delineates the format of an unsolicited frame header. The - * first DWORD are UF attributes defined by the silicon architecture. The data - * depicts actual header information received on the link. - */ -struct scu_unsolicited_frame_header { - /** - * This field indicates if there is an Initiator Index Table entry with - * which this header is associated. - */ - u32 iit_exists:1; - - /** - * This field simply indicates the protocol type (i.e. SSP, STP, SMP). - */ - u32 protocol_type:3; - - /** - * This field indicates if the frame is an address frame (IAF or OAF) - * or if it is a information unit frame. - */ - u32 is_address_frame:1; - - /** - * This field simply indicates the connection rate at which the frame - * was received. - */ - u32 connection_rate:4; - - u32 reserved:23; - - /** - * This field represents the actual header data received on the link. - */ - u32 data[SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS]; - -}; - -#endif /* _SCU_UNSOLICITED_FRAME_H_ */ diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h index b849a84a..31cb950 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.h +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -57,7 +57,50 @@ #define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ #include "isci.h" -#include "scu_unsolicited_frame.h" + +#define SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS 15 + +/** + * struct scu_unsolicited_frame_header - + * + * This structure delineates the format of an unsolicited frame header. The + * first DWORD are UF attributes defined by the silicon architecture. The data + * depicts actual header information received on the link. + */ +struct scu_unsolicited_frame_header { + /** + * This field indicates if there is an Initiator Index Table entry with + * which this header is associated. + */ + u32 iit_exists:1; + + /** + * This field simply indicates the protocol type (i.e. SSP, STP, SMP). + */ + u32 protocol_type:3; + + /** + * This field indicates if the frame is an address frame (IAF or OAF) + * or if it is a information unit frame. + */ + u32 is_address_frame:1; + + /** + * This field simply indicates the connection rate at which the frame + * was received. + */ + u32 connection_rate:4; + + u32 reserved:23; + + /** + * This field represents the actual header data received on the link. + */ + u32 data[SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS]; + +}; + + /** * enum unsolicited_frame_state - -- cgit v0.10.2 From dc00c8b6940aa10ab1ce6a4d10b1bfe7b848781b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 1 Jul 2011 11:41:21 -0700 Subject: isci: cleanup silicon revision detection Perform checking per-pci device (even though all systems will only have 1 pci device in this generation), and delete support for silicon that does not report a proper revision (i.e. A0). Reported-by: Christoph Hellwig Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index b554ea2..26072f1 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1886,6 +1886,7 @@ void sci_controller_power_control_queue_remove(struct isci_host *ihost, static void sci_controller_afe_initialization(struct isci_host *ihost) { const struct sci_oem_params *oem = &ihost->oem_parameters; + struct pci_dev *pdev = ihost->pdev; u32 afe_status; u32 phy_id; @@ -1893,7 +1894,7 @@ static void sci_controller_afe_initialization(struct isci_host *ihost) writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); - if (is_b0()) { + if (is_b0(pdev)) { /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement * Timer, PM Stagger Timer */ writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2); @@ -1901,17 +1902,15 @@ static void sci_controller_afe_initialization(struct isci_host *ihost) } /* Configure bias currents to normal */ - if (is_a0()) - writel(0x00005500, &ihost->scu_registers->afe.afe_bias_control); - else if (is_a2()) + if (is_a2(pdev)) writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control); - else if (is_b0() || is_c0()) + else if (is_b0(pdev) || is_c0(pdev)) writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ - if (is_b0() || is_c0()) + if (is_b0(pdev) || is_c0(pdev)) writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0); else writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0); @@ -1924,7 +1923,7 @@ static void sci_controller_afe_initialization(struct isci_host *ihost) udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); - if (is_a0() || is_a2()) { + if (is_a2(pdev)) { /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); @@ -1933,11 +1932,11 @@ static void sci_controller_afe_initialization(struct isci_host *ihost) for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; - if (is_b0()) { + if (is_b0(pdev)) { /* Configure transmitter SSC parameters */ writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); - } else if (is_c0()) { + } else if (is_c0(pdev)) { /* Configure transmitter SSC parameters */ writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); @@ -1961,11 +1960,9 @@ static void sci_controller_afe_initialization(struct isci_host *ihost) /* * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) * & increase TX int & ext bias 20%....(0xe85c) */ - if (is_a0()) - writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - else if (is_a2()) + if (is_a2(pdev)) writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); - else if (is_b0()) { + else if (is_b0(pdev)) { /* Power down TX and RX (PWRDNTX and PWRDNRX) */ writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); @@ -1985,7 +1982,7 @@ static void sci_controller_afe_initialization(struct isci_host *ihost) } udelay(AFE_REGISTER_WRITE_DELAY); - if (is_a0() || is_a2()) { + if (is_a2(pdev)) { /* Enable TX equalization (0xe824) */ writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); udelay(AFE_REGISTER_WRITE_DELAY); @@ -1998,11 +1995,9 @@ static void sci_controller_afe_initialization(struct isci_host *ihost) udelay(AFE_REGISTER_WRITE_DELAY); /* Leave DFE/FFE on */ - if (is_a0()) - writel(0x3F09983F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - else if (is_a2()) + if (is_a2(pdev)) writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); - else if (is_b0()) { + else if (is_b0(pdev)) { writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index ec0bba5..062101a 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -416,33 +416,25 @@ static inline struct device *scirdev_to_dev(struct isci_remote_device *idev) return &idev->isci_port->isci_host->pdev->dev; } -enum { - ISCI_SI_REVA0, - ISCI_SI_REVA2, - ISCI_SI_REVB0, - ISCI_SI_REVC0 -}; - -extern int isci_si_rev; - -static inline bool is_a0(void) -{ - return isci_si_rev == ISCI_SI_REVA0; -} - -static inline bool is_a2(void) +static inline bool is_a2(struct pci_dev *pdev) { - return isci_si_rev == ISCI_SI_REVA2; + if (pdev->revision < 4) + return true; + return false; } -static inline bool is_b0(void) +static inline bool is_b0(struct pci_dev *pdev) { - return isci_si_rev == ISCI_SI_REVB0; + if (pdev->revision == 4) + return true; + return false; } -static inline bool is_c0(void) +static inline bool is_c0(struct pci_dev *pdev) { - return isci_si_rev > ISCI_SI_REVB0; + if (pdev->revision >= 5) + return true; + return false; } void sci_controller_post_request(struct isci_host *ihost, diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 8d9a8bf..61e0d09 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -85,10 +85,6 @@ MODULE_DEVICE_TABLE(pci, isci_id_table); /* linux isci specific settings */ -int isci_si_rev = ISCI_SI_REVA2; -module_param(isci_si_rev, int, 0); -MODULE_PARM_DESC(isci_si_rev, "(deprecated) override default si rev (0: A0 1: A2 2: B0)"); - unsigned char no_outbound_task_to = 20; module_param(no_outbound_task_to, byte, 0); MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)"); @@ -435,32 +431,6 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) return NULL; } -static void check_si_rev(struct pci_dev *pdev) -{ - switch (pdev->revision) { - case 0: - case 1: - /* if the id is ambiguous don't update isci_si_rev */ - break; - case 3: - isci_si_rev = ISCI_SI_REVA2; - break; - case 4: - isci_si_rev = ISCI_SI_REVB0; - break; - default: - case 5: - isci_si_rev = ISCI_SI_REVC0; - break; - } - - dev_info(&pdev->dev, "driver configured for %s silicon (rev: %d)\n", - isci_si_rev == ISCI_SI_REVA0 ? "A0" : - isci_si_rev == ISCI_SI_REVA2 ? "A2" : - isci_si_rev == ISCI_SI_REVB0 ? "B0" : "C0", pdev->revision); - -} - static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct isci_pci_info *pci_info; @@ -470,7 +440,8 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic struct isci_orom *orom = NULL; char *source = "(platform)"; - check_si_rev(pdev); + dev_info(&pdev->dev, "driver configured for rev: %d silicon\n", + pdev->revision); pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL); if (!pci_info) diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index e56080a..d8f893e 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -211,7 +211,7 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); writel(llctl, &iphy->link_layer_registers->link_layer_control); - if (is_a0() || is_a2()) { + if (is_a2(ihost->pdev)) { /* Program the max ARB time for the PHY to 700us so we inter-operate with * the PMC expander which shuts down PHYs if the expander PHY generates too * many breaks. This time value will guarantee that the initiator PHY will diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index c7732fb..4b9d813 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -146,13 +146,13 @@ struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmw memcpy(orom, fw->data, fw->size); + if (is_c0(pdev)) + goto out; + /* * deprecated: override default amp_control for pre-preproduction * silicon revisions */ - if (isci_si_rev <= ISCI_SI_REVB0) - goto out; - for (i = 0; i < ARRAY_SIZE(orom->ctrl); i++) for (j = 0; j < ARRAY_SIZE(orom->ctrl[i].phys); j++) { orom->ctrl[i].phys[j].afe_tx_amp_control0 = 0xe7c03; -- cgit v0.10.2 From a8a0a133b03c6863d0f77229d19befca4de905fa Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 1 Jul 2011 12:07:25 -0700 Subject: isci: pare back error messsages The messages emitted from task.c and some from request.c likely duplicate (in a less undertandable way) what is reported by the midlayer. Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 33c8ed1..a46e07a 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -2350,7 +2350,7 @@ static void isci_task_save_for_upper_layer_completion( /* No notification to libsas because this request is * already in the abort path. */ - dev_warn(&host->pdev->dev, + dev_dbg(&host->pdev->dev, "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n", __func__, task, @@ -2373,7 +2373,7 @@ static void isci_task_save_for_upper_layer_completion( case isci_perform_error_io_completion: /* Use sas_task_abort */ - dev_warn(&host->pdev->dev, + dev_dbg(&host->pdev->dev, "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n", __func__, task, @@ -2385,7 +2385,7 @@ static void isci_task_save_for_upper_layer_completion( break; default: - dev_warn(&host->pdev->dev, + dev_dbg(&host->pdev->dev, "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n", __func__, task, @@ -2710,7 +2710,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost, default: /* Catch any otherwise unhandled error codes here. */ - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: invalid completion code: 0x%x - " "isci_request = %p\n", __func__, completion_status, request); @@ -3164,7 +3164,7 @@ static enum sci_status isci_smp_request_build(struct isci_request *ireq) status = sci_io_request_construct_smp(dev, ireq, task); if (status != SCI_SUCCESS) - dev_warn(&ireq->isci_host->pdev->dev, + dev_dbg(&ireq->isci_host->pdev->dev, "%s: failed with status = %d\n", __func__, status); @@ -3219,7 +3219,7 @@ static enum sci_status isci_io_request_build(struct isci_host *ihost, status = sci_io_request_construct(ihost, idev, request); if (status != SCI_SUCCESS) { - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: failed request construct\n", __func__); return SCI_FAILURE; @@ -3238,7 +3238,7 @@ static enum sci_status isci_io_request_build(struct isci_host *ihost, status = isci_request_stp_request_construct(request); break; default: - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: unknown protocol\n", __func__); return SCI_FAILURE; } @@ -3302,7 +3302,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide status = isci_io_request_build(ihost, ireq, idev); if (status != SCI_SUCCESS) { - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: request_construct failed - status = 0x%x\n", __func__, status); @@ -3335,7 +3335,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide if (status != SCI_SUCCESS && status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: failed request start (0x%x)\n", __func__, status); spin_unlock_irqrestore(&ihost->scic_lock, flags); diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 5d962b6..22504c7 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -104,7 +104,7 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, /* No notification because this request is already in the * abort path. */ - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: Aborted - task = %p, response=%d, " "status=%d\n", __func__, task, response, status); @@ -112,7 +112,7 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, case isci_perform_error_io_completion: /* Use sas_task_abort */ - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: Error - task = %p, response=%d, " "status=%d\n", __func__, task, response, status); @@ -121,7 +121,7 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, break; default: - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: isci task notification default case!", __func__); sas_task_abort(task); @@ -374,7 +374,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost, status = sci_controller_start_task(ihost, idev, ireq); if (status != SCI_TASK_SUCCESS) { - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: start_io failed - status = 0x%x, request = %p\n", __func__, status, @@ -604,7 +604,7 @@ static void isci_terminate_request_core(struct isci_host *ihost, * being aborted. */ if (status != SCI_SUCCESS) { - dev_err(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: sci_controller_terminate_request" " returned = 0x%x\n", __func__, status); @@ -662,7 +662,7 @@ static void isci_terminate_request_core(struct isci_host *ihost, if (!termination_completed) { - dev_err(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: *** Timeout waiting for " "termination(%p/%p)\n", __func__, io_request_completion, @@ -853,7 +853,7 @@ static int isci_task_send_lu_reset_sata(struct isci_host *ihost, ret = isci_task_execute_tmf(ihost, idev, &tmf, ISCI_SRST_TIMEOUT_MS); if (ret != TMF_RESP_FUNC_COMPLETE) { - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: Assert SRST failed (%p) = %x", __func__, idev, ret); @@ -897,7 +897,7 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) */ if (!isci_device || isci_device_is_reset_pending(isci_host, isci_device)) { - dev_warn(&isci_host->pdev->dev, + dev_dbg(&isci_host->pdev->dev, "%s: No dev (%p), or " "RESET PENDING: domain_device=%p\n", __func__, isci_device, domain_device); @@ -970,7 +970,7 @@ static void isci_abort_task_process_cb( */ if ((old_request->status != aborted) && (old_request->status != completed)) - dev_err(&old_request->isci_host->pdev->dev, + dev_dbg(&old_request->isci_host->pdev->dev, "%s: Bad request status (%d): tmf=%p, old_request=%p\n", __func__, old_request->status, tmf, old_request); break; @@ -988,7 +988,7 @@ static void isci_abort_task_process_cb( break; default: - dev_err(&old_request->isci_host->pdev->dev, + dev_dbg(&old_request->isci_host->pdev->dev, "%s: Bad cb_state (%d): tmf=%p, old_request=%p\n", __func__, cb_state, tmf, old_request); break; @@ -1046,7 +1046,7 @@ int isci_task_abort_task(struct sas_task *task) * SCSI error handler thread to escalate to LUN reset */ if (sas_protocol_ata(task->task_proto)) { - dev_warn(&isci_host->pdev->dev, + dev_dbg(&isci_host->pdev->dev, " task %p is for a STP/SATA device;" " returning TMF_RESP_FUNC_FAILED\n" " to cause a LUN reset...\n", task); @@ -1176,7 +1176,7 @@ int isci_task_abort_task(struct sas_task *task) ISCI_ABORT_TASK_TIMEOUT_MS); if (ret != TMF_RESP_FUNC_COMPLETE) - dev_err(&isci_host->pdev->dev, + dev_dbg(&isci_host->pdev->dev, "%s: isci_task_send_tmf failed\n", __func__); } @@ -1395,7 +1395,7 @@ static int isci_smp_execute_task(struct isci_host *ihost, if (res) { del_timer(&task->timer); - dev_err(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: executing SMP task failed:%d\n", __func__, res); goto ex_err; @@ -1404,12 +1404,12 @@ static int isci_smp_execute_task(struct isci_host *ihost, wait_for_completion(&task->completion); res = -ECOMM; if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - dev_err(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: smp task timed out or aborted\n", __func__); isci_task_abort_task(task); if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { - dev_err(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: SMP task aborted and not done\n", __func__); goto ex_err; @@ -1432,7 +1432,7 @@ static int isci_smp_execute_task(struct isci_host *ihost, res = -EMSGSIZE; break; } else { - dev_err(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: task to dev %016llx response: 0x%x " "status 0x%x\n", __func__, SAS_ADDR(dev->sas_addr), @@ -1526,7 +1526,7 @@ static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy tmo = deadline - jiffies; if (res) { - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: iteration %d, phase %d:" " SMP error=%d, time_remaining=%lu\n", __func__, iteration, phy_state, res, tmo); @@ -1578,7 +1578,7 @@ static int isci_reset_device(struct isci_host *ihost, if (status != SCI_SUCCESS) { spin_unlock_irqrestore(&ihost->scic_lock, flags); - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: sci_remote_device_reset(%p) returned %d!\n", __func__, idev, status); @@ -1619,7 +1619,7 @@ static int isci_reset_device(struct isci_host *ihost, } if (status != SCI_SUCCESS) { - dev_warn(&ihost->pdev->dev, + dev_dbg(&ihost->pdev->dev, "%s: sci_remote_device_reset_complete(%p) " "returned %d!\n", __func__, idev, status); } -- cgit v0.10.2 From bc6f387d3156702a0430585b93c04934254c0de1 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 1 Jul 2011 13:03:44 -0700 Subject: isci: Device reset should request sas_phy_reset(phy, true) The hard_reset parameter passed to the LLDD in the direct-attached phy control case allows the LLDD to filter link failure events while the direct-attached device reset is executing. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 22504c7..2df45c5 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1563,7 +1563,7 @@ static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy } static int isci_reset_device(struct isci_host *ihost, - struct isci_remote_device *idev, int hard_reset) + struct isci_remote_device *idev) { struct sas_phy *phy = sas_find_local_phy(idev->domain_dev); struct isci_port *iport = idev->isci_port; @@ -1593,7 +1593,7 @@ static int isci_reset_device(struct isci_host *ihost, if (!scsi_is_sas_phy_local(phy)) set_bit(IPORT_BCN_BLOCKED, &iport->flags); - rc = sas_phy_reset(phy, hard_reset); + rc = sas_phy_reset(phy, true); /* Terminate in-progress I/O now. */ isci_remote_device_nuke_requests(ihost, idev); @@ -1633,8 +1633,8 @@ int isci_task_I_T_nexus_reset(struct domain_device *dev) { struct isci_host *ihost = dev_to_ihost(dev); struct isci_remote_device *idev; - int ret, hard_reset = 1; unsigned long flags; + int ret; spin_lock_irqsave(&ihost->scic_lock, flags); idev = isci_lookup_device(dev); @@ -1645,10 +1645,7 @@ int isci_task_I_T_nexus_reset(struct domain_device *dev) goto out; } - if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) - hard_reset = 0; - - ret = isci_reset_device(ihost, idev, hard_reset); + ret = isci_reset_device(ihost, idev); out: isci_put_device(idev); return ret; @@ -1659,11 +1656,8 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) struct domain_device *dev = sdev_to_domain_dev(cmd->device); struct isci_host *ihost = dev_to_ihost(dev); struct isci_remote_device *idev; - int ret, hard_reset = 1; unsigned long flags; - - if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) - hard_reset = 0; + int ret; spin_lock_irqsave(&ihost->scic_lock, flags); idev = isci_lookup_device(dev); @@ -1674,7 +1668,7 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) goto out; } - ret = isci_reset_device(ihost, idev, hard_reset); + ret = isci_reset_device(ihost, idev); out: isci_put_device(idev); return ret; -- cgit v0.10.2 From b6b2a1e8068684baf67307a994180976b7c443ed Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 3 Jul 2011 13:32:53 +0200 Subject: hwmon: (emc6w201) Properly handle all errors Handle errors on 8-bit register reads and writes too. Also use likely and unlikely to make the functions faster on success. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck diff --git a/drivers/hwmon/emc6w201.c b/drivers/hwmon/emc6w201.c index e0ef323..0064432 100644 --- a/drivers/hwmon/emc6w201.c +++ b/drivers/hwmon/emc6w201.c @@ -78,8 +78,9 @@ static u16 emc6w201_read16(struct i2c_client *client, u8 reg) lsb = i2c_smbus_read_byte_data(client, reg); msb = i2c_smbus_read_byte_data(client, reg + 1); - if (lsb < 0 || msb < 0) { - dev_err(&client->dev, "16-bit read failed at 0x%02x\n", reg); + if (unlikely(lsb < 0 || msb < 0)) { + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 16, "read", reg); return 0xFFFF; /* Arbitrary value */ } @@ -95,10 +96,39 @@ static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val) int err; err = i2c_smbus_write_byte_data(client, reg, val & 0xff); - if (!err) + if (likely(!err)) err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8); - if (err < 0) - dev_err(&client->dev, "16-bit write failed at 0x%02x\n", reg); + if (unlikely(err < 0)) + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 16, "write", reg); + + return err; +} + +/* Read 8-bit value from register */ +static u8 emc6w201_read8(struct i2c_client *client, u8 reg) +{ + int val; + + val = i2c_smbus_read_byte_data(client, reg); + if (unlikely(val < 0)) { + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 8, "read", reg); + return 0x00; /* Arbitrary value */ + } + + return val; +} + +/* Write 8-bit value to register */ +static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val) +{ + int err; + + err = i2c_smbus_write_byte_data(client, reg, val); + if (unlikely(err < 0)) + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 8, "write", reg); return err; } @@ -114,25 +144,25 @@ static struct emc6w201_data *emc6w201_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { for (nr = 0; nr < 6; nr++) { data->in[input][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN(nr)); data->in[min][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN_LOW(nr)); data->in[max][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN_HIGH(nr)); } for (nr = 0; nr < 6; nr++) { data->temp[input][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP(nr)); data->temp[min][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP_LOW(nr)); data->temp[max][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP_HIGH(nr)); } @@ -192,7 +222,7 @@ static ssize_t set_in(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); data->in[sf][nr] = SENSORS_LIMIT(val, 0, 255); - err = i2c_smbus_write_byte_data(client, reg, data->in[sf][nr]); + err = emc6w201_write8(client, reg, data->in[sf][nr]); mutex_unlock(&data->update_lock); return err < 0 ? err : count; @@ -229,7 +259,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); data->temp[sf][nr] = SENSORS_LIMIT(val, -127, 128); - err = i2c_smbus_write_byte_data(client, reg, data->temp[sf][nr]); + err = emc6w201_write8(client, reg, data->temp[sf][nr]); mutex_unlock(&data->update_lock); return err < 0 ? err : count; @@ -444,7 +474,7 @@ static int emc6w201_detect(struct i2c_client *client, /* Check configuration */ config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG); - if ((config & 0xF4) != 0x04) + if (config < 0 || (config & 0xF4) != 0x04) return -ENODEV; if (!(config & 0x01)) { dev_err(&client->dev, "Monitoring not enabled\n"); -- cgit v0.10.2 From 7958e3b45dd03bf4bc35b3ec97b8a9a4d6c616a5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 3 Jul 2011 13:32:53 +0200 Subject: hwmon: Use <> rather than () around my e-mail address Signed-off-by: Hans de Goede Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index a4a94a0..f8ef196 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -2662,7 +2662,7 @@ static void __exit f71882fg_exit(void) } MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver"); -MODULE_AUTHOR("Hans Edgington, Hans de Goede (hdegoede@redhat.com)"); +MODULE_AUTHOR("Hans Edgington, Hans de Goede "); MODULE_LICENSE("GPL"); module_init(f71882fg_init); diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 020c872..3494a4c 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -887,7 +887,7 @@ static void __exit sch5627_exit(void) } MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver"); -MODULE_AUTHOR("Hans de Goede (hdegoede@redhat.com)"); +MODULE_AUTHOR("Hans de Goede "); MODULE_LICENSE("GPL"); module_init(sch5627_init); -- cgit v0.10.2 From 5da556e33fc53179a5bec10b5698e262cf68e26d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 3 Jul 2011 13:32:53 +0200 Subject: hwmon: (f71882fg) Add support for the F71869A The F71869A is almost the same as the F71869F/E, except that it has the normal number of temp and pwm zones for a F71882FG derived chip, rather then the limited number of the F71869F/E. Signed-off-by: Hans de Goede Tested-by: Max Baldwin Acked-by: Guenter Roeck Signed-off-by: Jean Delvare diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg index 84d2623..de91c0d 100644 --- a/Documentation/hwmon/f71882fg +++ b/Documentation/hwmon/f71882fg @@ -22,6 +22,10 @@ Supported chips: Prefix: 'f71869' Addresses scanned: none, address read from Super I/O config space Datasheet: Available from the Fintek website + * Fintek F71869A + Prefix: 'f71869a' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Not public * Fintek F71882FG and F71883FG Prefix: 'f71882fg' Addresses scanned: none, address read from Super I/O config space diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 16db83c..5f888f7 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -333,7 +333,7 @@ config SENSORS_F71882FG F71858FG F71862FG F71863FG - F71869F/E + F71869F/E/A F71882FG F71883FG F71889FG/ED/A diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index f8ef196..2d96ed2 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -52,6 +52,7 @@ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ #define SIO_F71869_ID 0x0814 /* Chipset ID */ +#define SIO_F71869A_ID 0x1007 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ #define SIO_F71889_ID 0x0723 /* Chipset ID */ #define SIO_F71889E_ID 0x0909 /* Chipset ID */ @@ -108,8 +109,8 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71882fg, f71889fg, - f71889ed, f71889a, f8000, f81865f }; +enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg, + f71889fg, f71889ed, f71889a, f8000, f81865f }; static const char *f71882fg_names[] = { "f71808e", @@ -117,6 +118,7 @@ static const char *f71882fg_names[] = { "f71858fg", "f71862fg", "f71869", /* Both f71869f and f71869e, reg. compatible and same id */ + "f71869a", "f71882fg", "f71889fg", /* f81801u too, same id */ "f71889ed", @@ -131,6 +133,7 @@ static const char f71882fg_has_in[][F71882FG_MAX_INS] = { [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 }, [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, + [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, @@ -145,6 +148,7 @@ static const char f71882fg_has_in1_alarm[] = { [f71858fg] = 0, [f71862fg] = 0, [f71869] = 0, + [f71869a] = 0, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -159,6 +163,7 @@ static const char f71882fg_fan_has_beep[] = { [f71858fg] = 0, [f71862fg] = 1, [f71869] = 1, + [f71869a] = 1, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -173,6 +178,7 @@ static const char f71882fg_nr_fans[] = { [f71858fg] = 3, [f71862fg] = 3, [f71869] = 3, + [f71869a] = 3, [f71882fg] = 4, [f71889fg] = 3, [f71889ed] = 3, @@ -187,6 +193,7 @@ static const char f71882fg_temp_has_beep[] = { [f71858fg] = 0, [f71862fg] = 1, [f71869] = 1, + [f71869a] = 1, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -201,6 +208,7 @@ static const char f71882fg_nr_temps[] = { [f71858fg] = 3, [f71862fg] = 3, [f71869] = 3, + [f71869a] = 3, [f71882fg] = 3, [f71889fg] = 3, [f71889ed] = 3, @@ -2243,6 +2251,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) case f71808e: case f71808a: case f71869: + case f71869a: /* These always have signed auto point temps */ data->auto_point_temp_signed = 1; /* Fall through to select correct fan/pwm reg bank! */ @@ -2305,6 +2314,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) case f71808e: case f71808a: case f71869: + case f71869a: case f71889fg: case f71889ed: case f71889a: @@ -2528,6 +2538,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, case SIO_F71869_ID: sio_data->type = f71869; break; + case SIO_F71869A_ID: + sio_data->type = f71869a; + break; case SIO_F71882_ID: sio_data->type = f71882fg; break; -- cgit v0.10.2 From 014ab488e2ebdc65d2088a3ab6d4b8c4472c57fe Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 3 Jul 2011 13:32:54 +0200 Subject: hwmon-vid: Fix typo in VIA CPU name It's Nehemiah, not Nemiah. Signed-off-by: Jean Delvare Acked-by: Guenter Roeck diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 2582bfe..c8195a0 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -202,7 +202,7 @@ static struct vrm_model vrm_models[] = { {X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */ {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */ - {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */ + {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nehemiah */ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */ {X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */ {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7, Esther */ -- cgit v0.10.2 From af75d5b771269f764999a67511e7d0c995d1a185 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 3 Jul 2011 13:32:54 +0200 Subject: hwmon: (k10temp) Update documentation for Fam12h Add some CPU series IDs and links to the Fam12h datasheets. Signed-off-by: Clemens Ladisch Signed-off-by: Jean Delvare diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index 0393c89..a10f736 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp @@ -9,8 +9,8 @@ Supported chips: Socket S1G3: Athlon II, Sempron, Turion II * AMD Family 11h processors: Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) -* AMD Family 12h processors: "Llano" -* AMD Family 14h processors: "Brazos" (C/E/G-Series) +* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series) +* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) * AMD Family 15h processors: "Bulldozer" Prefix: 'k10temp' @@ -20,12 +20,16 @@ Supported chips: http://support.amd.com/us/Processor_TechDocs/31116.pdf BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors: http://support.amd.com/us/Processor_TechDocs/41256.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors: + http://support.amd.com/us/Processor_TechDocs/41131.pdf BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors: http://support.amd.com/us/Processor_TechDocs/43170.pdf Revision Guide for AMD Family 10h Processors: http://support.amd.com/us/Processor_TechDocs/41322.pdf Revision Guide for AMD Family 11h Processors: http://support.amd.com/us/Processor_TechDocs/41788.pdf + Revision Guide for AMD Family 12h Processors: + http://support.amd.com/us/Processor_TechDocs/44739.pdf Revision Guide for AMD Family 14h Models 00h-0Fh Processors: http://support.amd.com/us/Processor_TechDocs/47534.pdf AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks: -- cgit v0.10.2 From a5ec7f86dc5432c44d8407a144e7617ec65da770 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 3 Jul 2011 14:14:45 -0500 Subject: [SCSI] isci: fix checkpatch errors Signed-off-by: James Bottomley diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index d8f893e..79313a7 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -197,7 +197,7 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, (u8)ihost->user_parameters.no_outbound_task_timeout); - switch(phy_user->max_speed_generation) { + switch (phy_user->max_speed_generation) { case SCIC_SDS_PARM_GEN3_SPEED: link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; break; diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 4b9d813..b5f4341 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -34,8 +34,9 @@ #include "task.h" #include "probe_roms.h" -static efi_char16_t isci_efivar_name[] = - {'R', 's', 't', 'S', 'c', 'u', 'O'}; +static efi_char16_t isci_efivar_name[] = { + 'R', 's', 't', 'S', 'c', 'u', 'O' +}; struct isci_orom *isci_request_oprom(struct pci_dev *pdev) { @@ -182,7 +183,7 @@ struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) struct isci_oem_hdr *oem_hdr; u8 *tmp, sum; int j; - ssize_t data_len; + unsigned long data_len; u8 *efi_data; u32 efi_attrib = 0; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 85e54f5..b6e6368 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -73,7 +73,7 @@ static void isci_remote_device_not_ready(struct isci_host *ihost, struct isci_remote_device *idev, u32 reason) { - struct isci_request * ireq; + struct isci_request *ireq; dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, idev); diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 11bc279..7a1d5a9 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -440,8 +440,8 @@ void sci_smp_request_copy_response(struct isci_request *ireq); static inline int isci_task_is_ncq_recovery(struct sas_task *task) { return (sas_protocol_ata(task->task_proto) && - task->ata_task.fis.command == ATA_CMD_READ_LOG_EXT && - task->ata_task.fis.lbal == ATA_LOG_SATA_NCQ); + task->ata_task.fis.command == ATA_CMD_READ_LOG_EXT && + task->ata_task.fis.lbal == ATA_LOG_SATA_NCQ); } diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 2df45c5..d6bcdd0 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -88,44 +88,45 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, * function should not be completed to the host in the regular path. */ switch (disposition) { - case isci_perform_normal_io_completion: - /* Normal notification (task_done) */ - dev_dbg(&ihost->pdev->dev, - "%s: Normal - task = %p, response=%d, " - "status=%d\n", - __func__, task, response, status); + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + dev_dbg(&ihost->pdev->dev, + "%s: Normal - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); - task->lldd_task = NULL; + task->lldd_task = NULL; - isci_execpath_callback(ihost, task, task->task_done); - break; + isci_execpath_callback(ihost, task, task->task_done); + break; - case isci_perform_aborted_io_completion: - /* No notification because this request is already in the - * abort path. - */ - dev_dbg(&ihost->pdev->dev, - "%s: Aborted - task = %p, response=%d, " - "status=%d\n", - __func__, task, response, status); - break; + case isci_perform_aborted_io_completion: + /* + * No notification because this request is already in the + * abort path. + */ + dev_dbg(&ihost->pdev->dev, + "%s: Aborted - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + break; - case isci_perform_error_io_completion: - /* Use sas_task_abort */ - dev_dbg(&ihost->pdev->dev, - "%s: Error - task = %p, response=%d, " - "status=%d\n", - __func__, task, response, status); + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_dbg(&ihost->pdev->dev, + "%s: Error - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); - isci_execpath_callback(ihost, task, sas_task_abort); - break; + isci_execpath_callback(ihost, task, sas_task_abort); + break; - default: - dev_dbg(&ihost->pdev->dev, - "%s: isci task notification default case!", - __func__); - sas_task_abort(task); - break; + default: + dev_dbg(&ihost->pdev->dev, + "%s: isci task notification default case!", + __func__); + sas_task_abort(task); + break; } } @@ -1056,7 +1057,7 @@ int isci_task_abort_task(struct sas_task *task) dev_dbg(&isci_host->pdev->dev, "%s: old_request == %p\n", __func__, old_request); - any_dev_reset = isci_device_is_reset_pending(isci_host,isci_device); + any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device); spin_lock_irqsave(&task->task_state_lock, flags); @@ -1115,9 +1116,9 @@ int isci_task_abort_task(struct sas_task *task) __func__, task); } goto out; - } - else + } else { spin_unlock_irqrestore(&task->task_state_lock, flags); + } spin_lock_irqsave(&isci_host->scic_lock, flags); -- cgit v0.10.2 From 178783622ce0fd629fad21b33b8f8f56b64c5e45 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2011 23:24:21 +0100 Subject: ARM: dmabounce: fix map_single() error return value When map_single() is unable to obtain a safe buffer, we must return the dma_addr_t error value, which is ~0 rather than 0. Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index e568163..841df7d 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, if (buf == 0) { dev_err(dev, "%s: unable to map unsafe buffer %p!\n", __func__, ptr); - return 0; + return ~0; } dev_dbg(dev, -- cgit v0.10.2 From 8021a4a048a85906302bd0236f3d125473be65b1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2011 16:13:58 +0100 Subject: ARM: dma-mapping: define dma_(un)?map_single in terms of dma_(un)?map_page Use dma_map_page()/dma_unmap_page() internals to handle dma_map_single() and dma_unmap_single(). Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 841df7d..8a0588b 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -328,34 +328,6 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, * substitute the safe buffer for the unsafe one. * (basically move the buffer from an unsafe area to a safe one) */ -dma_addr_t __dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction dir) -{ - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", - __func__, ptr, size, dir); - - BUG_ON(!valid_dma_direction(dir)); - - return map_single(dev, ptr, size, dir); -} -EXPORT_SYMBOL(__dma_map_single); - -/* - * see if a mapped address was really a "safe" buffer and if so, copy - * the data from the safe buffer back to the unsafe buffer and free up - * the safe buffer. (basically return things back to the way they - * should be) - */ -void __dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction dir) -{ - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", - __func__, (void *) dma_addr, size, dir); - - unmap_single(dev, dma_addr, size, dir); -} -EXPORT_SYMBOL(__dma_unmap_single); - dma_addr_t __dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir) { diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 4fff837..d2903d0 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -298,10 +298,6 @@ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); /* * The DMA API, implemented by dmabounce.c. See below for descriptions. */ -extern dma_addr_t __dma_map_single(struct device *, void *, size_t, - enum dma_data_direction); -extern void __dma_unmap_single(struct device *, dma_addr_t, size_t, - enum dma_data_direction); extern dma_addr_t __dma_map_page(struct device *, struct page *, unsigned long, size_t, enum dma_data_direction); extern void __dma_unmap_page(struct device *, dma_addr_t, size_t, @@ -328,13 +324,6 @@ static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr, } -static inline dma_addr_t __dma_map_single(struct device *dev, void *cpu_addr, - size_t size, enum dma_data_direction dir) -{ - __dma_single_cpu_to_dev(cpu_addr, size, dir); - return virt_to_dma(dev, cpu_addr); -} - static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir) { @@ -342,12 +331,6 @@ static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page, return pfn_to_dma(dev, page_to_pfn(page)) + offset; } -static inline void __dma_unmap_single(struct device *dev, dma_addr_t handle, - size_t size, enum dma_data_direction dir) -{ - __dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir); -} - static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { @@ -373,14 +356,18 @@ static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle, static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, enum dma_data_direction dir) { + unsigned long offset; + struct page *page; dma_addr_t addr; + BUG_ON(!virt_addr_valid(cpu_addr)); + BUG_ON(!virt_addr_valid(cpu_addr + size - 1)); BUG_ON(!valid_dma_direction(dir)); - addr = __dma_map_single(dev, cpu_addr, size, dir); - debug_dma_map_page(dev, virt_to_page(cpu_addr), - (unsigned long)cpu_addr & ~PAGE_MASK, size, - dir, addr, true); + page = virt_to_page(cpu_addr); + offset = (unsigned long)cpu_addr & ~PAGE_MASK; + addr = __dma_map_page(dev, page, offset, size, dir); + debug_dma_map_page(dev, page, offset, size, dir, addr, true); return addr; } @@ -430,7 +417,7 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { debug_dma_unmap_page(dev, handle, size, dir, true); - __dma_unmap_single(dev, handle, size, dir); + __dma_unmap_page(dev, handle, size, dir); } /** -- cgit v0.10.2 From 71695dd8b9eacfcda1b548a5b1780d34213ad654 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2011 19:46:39 +0100 Subject: ARM: dmabounce: avoid needless valid_dma_direction() check This check is done at the DMA API level, so there's no point repeating it here. Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 8a0588b..3e0fa15 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -334,8 +334,6 @@ dma_addr_t __dma_map_page(struct device *dev, struct page *page, dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n", __func__, page, offset, size, dir); - BUG_ON(!valid_dma_direction(dir)); - if (PageHighMem(page)) { dev_err(dev, "DMA buffer bouncing of HIGHMEM pages " "is not supported\n"); -- cgit v0.10.2 From 23bc9873ba60ee661d8e9f3a6b22fc3bcc4b7015 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2011 22:28:32 +0100 Subject: ARM: dmabounce: separate out decision to bounce Move the decision to perform DMA bouncing out of map_single() into its own stand-alone function. Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 3e0fa15..643e1d6 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -219,36 +219,46 @@ static struct safe_buffer *find_safe_buffer_dev(struct device *dev, return find_safe_buffer(dev->archdata.dmabounce, dma_addr); } -static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction dir) +static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) { - struct dmabounce_device_info *device_info = dev->archdata.dmabounce; - dma_addr_t dma_addr; - int needs_bounce = 0; - - if (device_info) - DO_STATS ( device_info->map_op_count++ ); - - dma_addr = virt_to_dma(dev, ptr); + if (!dev || !dev->archdata.dmabounce) + return 0; if (dev->dma_mask) { - unsigned long mask = *dev->dma_mask; - unsigned long limit; + unsigned long limit, mask = *dev->dma_mask; limit = (mask + 1) & ~mask; if (limit && size > limit) { dev_err(dev, "DMA mapping too big (requested %#x " "mask %#Lx)\n", size, *dev->dma_mask); - return ~0; + return -E2BIG; } - /* - * Figure out if we need to bounce from the DMA mask. - */ - needs_bounce = (dma_addr | (dma_addr + size - 1)) & ~mask; + /* Figure out if we need to bounce from the DMA mask. */ + if ((dma_addr | (dma_addr + size - 1)) & ~mask) + return 1; } - if (device_info && (needs_bounce || dma_needs_bounce(dev, dma_addr, size))) { + return dma_needs_bounce(dev, dma_addr, size) ? 1 : 0; +} + +static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction dir) +{ + struct dmabounce_device_info *device_info = dev->archdata.dmabounce; + dma_addr_t dma_addr; + int ret; + + if (device_info) + DO_STATS ( device_info->map_op_count++ ); + + dma_addr = virt_to_dma(dev, ptr); + + ret = needs_bounce(dev, dma_addr, size); + if (ret < 0) + return ~0; + + if (ret > 0) { struct safe_buffer *buf; buf = alloc_safe_buffer(device_info, ptr, size, dir); -- cgit v0.10.2 From dd3641fc3cf6d10b7cf4e266c2f651517779e727 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2011 22:39:43 +0100 Subject: ARM: dmabounce: move decision for bouncing into __dma_map_page() Move the decision whether to bounce into __dma_map_page(), before the check for high pages. This avoids triggering the high page check for devices which aren't using dmabounce. Fix the unmap path to cope too. Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 643e1d6..6ae292c 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -246,88 +246,58 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, enum dma_data_direction dir) { struct dmabounce_device_info *device_info = dev->archdata.dmabounce; - dma_addr_t dma_addr; - int ret; + struct safe_buffer *buf; if (device_info) DO_STATS ( device_info->map_op_count++ ); - dma_addr = virt_to_dma(dev, ptr); - - ret = needs_bounce(dev, dma_addr, size); - if (ret < 0) + buf = alloc_safe_buffer(device_info, ptr, size, dir); + if (buf == 0) { + dev_err(dev, "%s: unable to map unsafe buffer %p!\n", + __func__, ptr); return ~0; + } - if (ret > 0) { - struct safe_buffer *buf; - - buf = alloc_safe_buffer(device_info, ptr, size, dir); - if (buf == 0) { - dev_err(dev, "%s: unable to map unsafe buffer %p!\n", - __func__, ptr); - return ~0; - } - - dev_dbg(dev, - "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), - buf->safe, buf->safe_dma_addr); - - if ((dir == DMA_TO_DEVICE) || - (dir == DMA_BIDIRECTIONAL)) { - dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n", - __func__, ptr, buf->safe, size); - memcpy(buf->safe, ptr, size); - } - ptr = buf->safe; + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + buf->safe, buf->safe_dma_addr); - dma_addr = buf->safe_dma_addr; - } else { - /* - * We don't need to sync the DMA buffer since - * it was allocated via the coherent allocators. - */ - __dma_single_cpu_to_dev(ptr, size, dir); + if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) { + dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n", + __func__, ptr, buf->safe, size); + memcpy(buf->safe, ptr, size); } - return dma_addr; + return buf->safe_dma_addr; } -static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, +static inline void unmap_single(struct device *dev, struct safe_buffer *buf, size_t size, enum dma_data_direction dir) { - struct safe_buffer *buf = find_safe_buffer_dev(dev, dma_addr, "unmap"); - - if (buf) { - BUG_ON(buf->size != size); - BUG_ON(buf->direction != dir); + BUG_ON(buf->size != size); + BUG_ON(buf->direction != dir); - dev_dbg(dev, - "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), - buf->safe, buf->safe_dma_addr); + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + buf->safe, buf->safe_dma_addr); - DO_STATS(dev->archdata.dmabounce->bounce_count++); + DO_STATS(dev->archdata.dmabounce->bounce_count++); - if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { - void *ptr = buf->ptr; + if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { + void *ptr = buf->ptr; - dev_dbg(dev, - "%s: copy back safe %p to unsafe %p size %d\n", - __func__, buf->safe, ptr, size); - memcpy(ptr, buf->safe, size); + dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", + __func__, buf->safe, ptr, size); + memcpy(ptr, buf->safe, size); - /* - * Since we may have written to a page cache page, - * we need to ensure that the data will be coherent - * with user mappings. - */ - __cpuc_flush_dcache_area(ptr, size); - } - free_safe_buffer(dev->archdata.dmabounce, buf); - } else { - __dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir); + /* + * Since we may have written to a page cache page, + * we need to ensure that the data will be coherent + * with user mappings. + */ + __cpuc_flush_dcache_area(ptr, size); } + free_safe_buffer(dev->archdata.dmabounce, buf); } /* ************************************************** */ @@ -341,12 +311,25 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, dma_addr_t __dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir) { + dma_addr_t dma_addr; + int ret; + dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n", __func__, page, offset, size, dir); + dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset; + + ret = needs_bounce(dev, dma_addr, size); + if (ret < 0) + return ~0; + + if (ret == 0) { + __dma_page_cpu_to_dev(page, offset, size, dir); + return dma_addr; + } + if (PageHighMem(page)) { - dev_err(dev, "DMA buffer bouncing of HIGHMEM pages " - "is not supported\n"); + dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n"); return ~0; } @@ -363,10 +346,19 @@ EXPORT_SYMBOL(__dma_map_page); void __dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) { + struct safe_buffer *buf; + dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", __func__, (void *) dma_addr, size, dir); - unmap_single(dev, dma_addr, size, dir); + buf = find_safe_buffer_dev(dev, dma_addr, __func__); + if (!buf) { + __dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, dma_addr)), + dma_addr & ~PAGE_MASK, size, dir); + return; + } + + unmap_single(dev, buf, size, dir); } EXPORT_SYMBOL(__dma_unmap_page); -- cgit v0.10.2 From e2f521e247576c897e1bf0ada801e87c7e2db89f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2011 23:53:13 +0100 Subject: ARM: dmabounce: remove useless pr_err We already check that dev != NULL, so this won't be reached. Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 6ae292c..0077c1b 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -210,10 +210,7 @@ static struct safe_buffer *find_safe_buffer_dev(struct device *dev, if (!dev || !dev->archdata.dmabounce) return NULL; if (dma_mapping_error(dev, dma_addr)) { - if (dev) - dev_err(dev, "Trying to %s invalid mapping\n", where); - else - pr_err("unknown device: Trying to %s invalid mapping\n", where); + dev_err(dev, "Trying to %s invalid mapping\n", where); return NULL; } return find_safe_buffer(dev->archdata.dmabounce, dma_addr); -- cgit v0.10.2 From dfa322fceb15227c07670c415e835d2dfa8a4307 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2011 23:54:34 +0100 Subject: ARM: dmabounce: check pointer against NULL not 0 Pointers should be checked against NULL rather than 0, otherwise we get sparse warnings. Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 0077c1b..b4a8759 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -249,7 +249,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, DO_STATS ( device_info->map_op_count++ ); buf = alloc_safe_buffer(device_info, ptr, size, dir); - if (buf == 0) { + if (buf == NULL) { dev_err(dev, "%s: unable to map unsafe buffer %p!\n", __func__, ptr); return ~0; -- cgit v0.10.2 From c289b2e0ccff1142908e20398930dc2e14697e74 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2011 23:56:17 +0100 Subject: ARM: dmabounce: correct unmap_single dev_dbg DMA addresses should not be casted to void * for printing. Fix that to be consistent with the rest of the file. Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index b4a8759..4f13505 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -345,8 +345,8 @@ void __dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, { struct safe_buffer *buf; - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", - __func__, (void *) dma_addr, size, dir); + dev_dbg(dev, "%s(dma=%#x,size=%d,dir=%x)\n", + __func__, dma_addr, size, dir); buf = find_safe_buffer_dev(dev, dma_addr, __func__); if (!buf) { -- cgit v0.10.2 From 60b677034fcb3e48ffa30d638b09ac925afb4b36 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Fri, 1 Jul 2011 22:06:44 +0000 Subject: net: 8139too: Initial necessary vlan_features to support vlan Offload setting of vlan device requires vlan_features to be initialized. Signed-off-by: Shan Wei Acked-by: Francois Romieu Signed-off-by: David S. Miller diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 98517a3..e3bad82 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -992,6 +992,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, * features */ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA; + dev->vlan_features = dev->features; dev->irq = pdev->irq; -- cgit v0.10.2 From 2fb83cd618be34546fb526a9051eceaa95517026 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 3 Jul 2011 22:34:29 -0700 Subject: natsemi: silence dma-debug warnings This silences dma-debug warnings: https://lkml.org/lkml/2011/6/30/341 ------------[ cut here ]------------ WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820 check_unmap+0x1fe/0x56a() natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000006ef0040] [map size=1538 bytes] [unmap size=1522 bytes] Modules linked in: pc8736x_gpio pc87360 hwmon_vid scx200_gpio nsc_gpio scx200_hrt scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6 cfg80211 pcspkr rfkill scx200 ide_gd_mod ide_pci_generic ohci_hcd usbcore sc1200 ide_core Pid: 870, comm: collector Not tainted 3.0.0-rc5-sk-00080-gca56a95 #1 Call Trace: [] warn_slowpath_common+0x4a/0x5f [] ? check_unmap+0x1fe/0x56a [] warn_slowpath_fmt+0x26/0x2a [] check_unmap+0x1fe/0x56a [] debug_dma_unmap_page+0x53/0x5b [] pci_unmap_single+0x4d/0x57 [] natsemi_poll+0x343/0x5ca [] ? try_to_wake_up+0xea/0xfc [] ? spin_unlock_irq.clone.28+0x18/0x23 [] net_rx_action+0x3f/0xe5 [] __do_softirq+0x5b/0xd1 [] ? local_bh_enable+0xa/0xa [] ? irq_exit+0x34/0x75 [] ? do_IRQ+0x66/0x79 [] ? common_interrupt+0x29/0x30 [] ? finish_task_switch.clone.118+0x31/0x72 [] ? schedule+0x3b2/0x3f1 [] ? hrtimer_start_range_ns+0x10/0x12 [] ? hrtimer_start_expires+0x1c/0x24 [] ? schedule_hrtimeout_range_clock+0x8e/0xb4 [] ? update_rmtp+0x68/0x68 [] ? schedule_hrtimeout_range+0xa/0xc [] ? poll_schedule_timeout+0x27/0x3e [] ? do_select+0x488/0x4cd [] ? finish_task_switch.clone.118+0x43/0x72 [] ? need_resched+0x14/0x1e [] ? poll_freewait+0x74/0x74 [] ? need_resched+0x14/0x1e [] ? schedule+0x3e1/0x3f1 [] ? irq_exit+0x47/0x75 [] ? need_resched+0x14/0x1e [] ? preempt_schedule_irq+0x44/0x4a [] ? need_resched+0x17/0x19 [] ? put_dec_full+0x7b/0xaa [] ? blkdev_ioctl+0x434/0x618 [] ? put_dec+0x2f/0x6d [] ? number.clone.1+0x10b/0x1d0 [] ? preempt_schedule_irq+0x44/0x4a [] ? need_resched+0x17/0x19 [] ? vsnprintf+0x225/0x264 [] ? vsnprintf+0x7f/0x264 [] ? seq_printf+0x22/0x40 [] ? do_task_stat+0x582/0x5a3 [] ? poll_schedule_timeout+0x27/0x3e [] ? core_sys_select+0x11f/0x1a3 [] ? poll_schedule_timeout+0x27/0x3e [] ? proc_tgid_stat+0xd/0xf [] ? recalc_sigpending+0x32/0x35 [] ? __set_task_blocked+0x64/0x6a [] ? timespec_add_safe+0x24/0x48 [] ? spin_unlock_irq.clone.16+0x18/0x23 [] ? sys_pselect6+0xe5/0x13e [] ? syscall_call+0x7/0xb [] ? rpc_clntdir_depopulate+0x26/0x30 ---[ end trace 180dcac41a50938b ]--- Reported-by: Jim Cromie Signed-off-by: FUJITA Tomonori Tested-by: Jim Cromie Signed-off-by: David S. Miller diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index b78be08..8f8b65a 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -2360,7 +2360,8 @@ static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do) PCI_DMA_FROMDEVICE); } else { pci_unmap_single(np->pci_dev, np->rx_dma[entry], - buflen, PCI_DMA_FROMDEVICE); + buflen + NATSEMI_PADDING, + PCI_DMA_FROMDEVICE); skb_put(skb = np->rx_skbuff[entry], pkt_len); np->rx_skbuff[entry] = NULL; } -- cgit v0.10.2 From 3e86f1d8e397b1ef59a97910089e16a99e8f31f7 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Mon, 27 Jun 2011 23:08:53 +0000 Subject: vesafb: fix memory leak When releasing framebuffer, free colourmap allocations. Signed-off-by: Daniel J Blueman Signed-off-by: Paul Mundt diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c index a99bbe8..501b340 100644 --- a/drivers/video/vesafb.c +++ b/drivers/video/vesafb.c @@ -175,6 +175,7 @@ static int vesafb_setcolreg(unsigned regno, unsigned red, unsigned green, static void vesafb_destroy(struct fb_info *info) { + fb_dealloc_cmap(&info->cmap); if (info->screen_base) iounmap(info->screen_base); release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size); -- cgit v0.10.2 From 0703ed2a6b260cd743adf49a8281eb064d728832 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Jul 2011 08:32:21 +0100 Subject: ARM: dmabounce: get rid of dma_needs_bounce global function Pass the device type specific needs_bounce function in at dmabounce register time, avoiding the need for a platform specific global function to do this. Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 4f13505..595ecd29 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -79,6 +79,8 @@ struct dmabounce_device_info { struct dmabounce_pool large; rwlock_t lock; + + int (*needs_bounce)(struct device *, dma_addr_t, size_t); }; #ifdef STATS @@ -236,7 +238,7 @@ static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) return 1; } - return dma_needs_bounce(dev, dma_addr, size) ? 1 : 0; + return !!dev->archdata.dmabounce->needs_bounce(dev, dma_addr, size); } static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, @@ -430,7 +432,8 @@ static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, } int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, - unsigned long large_buffer_size) + unsigned long large_buffer_size, + int (*needs_bounce_fn)(struct device *, dma_addr_t, size_t)) { struct dmabounce_device_info *device_info; int ret; @@ -466,6 +469,7 @@ int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, device_info->dev = dev; INIT_LIST_HEAD(&device_info->safe_buffers); rwlock_init(&device_info->lock); + device_info->needs_bounce = needs_bounce_fn; #ifdef STATS device_info->total_allocs = 0; diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 7a21927..80b49e1 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -243,6 +243,13 @@ static struct resource it8152_mem = { * ITE8152 chip can address up to 64MByte, so all the devices * connected to ITE8152 (PCI and USB) should have limited DMA window */ +static int it8152_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", + __func__, dma_addr, size); + return dev->bus == &pci_bus_type && + (dma_addr + size - PHYS_OFFSET) >= SZ_64M; +} /* * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all @@ -254,7 +261,7 @@ static int it8152_pci_platform_notify(struct device *dev) if (dev->dma_mask) *dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET; dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET; - dmabounce_register_dev(dev, 2048, 4096); + dmabounce_register_dev(dev, 2048, 4096, it8152_needs_bounce); } return 0; } @@ -267,14 +274,6 @@ static int it8152_pci_platform_notify_remove(struct device *dev) return 0; } -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", - __func__, dma_addr, size); - return (dev->bus == &pci_bus_type) && - ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); -} - int dma_set_coherent_mask(struct device *dev, u64 mask) { if (mask >= PHYS_OFFSET + SZ_64M - 1) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 9c49a46..0569de6 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -579,7 +579,36 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2]; } +#endif +#ifdef CONFIG_DMABOUNCE +/* + * According to the "Intel StrongARM SA-1111 Microprocessor Companion + * Chip Specification Update" (June 2000), erratum #7, there is a + * significant bug in the SA1111 SDRAM shared memory controller. If + * an access to a region of memory above 1MB relative to the bank base, + * it is important that address bit 10 _NOT_ be asserted. Depending + * on the configuration of the RAM, bit 10 may correspond to one + * of several different (processor-relative) address bits. + * + * This routine only identifies whether or not a given DMA address + * is susceptible to the bug. + * + * This should only get called for sa1111_device types due to the + * way we configure our device dma_masks. + */ +static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) +{ + /* + * Section 4.6 of the "Intel StrongARM SA-1111 Development Module + * User's Guide" mentions that jumpers R51 and R52 control the + * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or + * SDRAM bank 1 on Neponset). The default configuration selects + * Assabet, so any address in bank 1 is necessarily invalid. + */ + return (machine_is_assabet() || machine_is_pfs168()) && + (addr >= 0xc8000000 || (addr + size) >= 0xc8000000); +} #endif static void sa1111_dev_release(struct device *_dev) @@ -644,7 +673,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, dev->dev.dma_mask = &dev->dma_mask; if (dev->dma_mask != 0xffffffffUL) { - ret = dmabounce_register_dev(&dev->dev, 1024, 4096); + ret = dmabounce_register_dev(&dev->dev, 1024, 4096, + sa1111_needs_bounce); if (ret) { dev_err(&dev->dev, "SA1111: Failed to register" " with dmabounce\n"); @@ -818,34 +848,6 @@ static void __sa1111_remove(struct sa1111 *sachip) kfree(sachip); } -/* - * According to the "Intel StrongARM SA-1111 Microprocessor Companion - * Chip Specification Update" (June 2000), erratum #7, there is a - * significant bug in the SA1111 SDRAM shared memory controller. If - * an access to a region of memory above 1MB relative to the bank base, - * it is important that address bit 10 _NOT_ be asserted. Depending - * on the configuration of the RAM, bit 10 may correspond to one - * of several different (processor-relative) address bits. - * - * This routine only identifies whether or not a given DMA address - * is susceptible to the bug. - * - * This should only get called for sa1111_device types due to the - * way we configure our device dma_masks. - */ -int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) -{ - /* - * Section 4.6 of the "Intel StrongARM SA-1111 Development Module - * User's Guide" mentions that jumpers R51 and R52 control the - * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or - * SDRAM bank 1 on Neponset). The default configuration selects - * Assabet, so any address in bank 1 is necessarily invalid. - */ - return ((machine_is_assabet() || machine_is_pfs168()) && - (addr >= 0xc8000000 || (addr + size) >= 0xc8000000)); -} - struct sa1111_save_data { unsigned int skcr; unsigned int skpcr; diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index d2903d0..4ad2533 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -256,14 +256,14 @@ int dma_mmap_writecombine(struct device *, struct vm_area_struct *, * @dev: valid struct device pointer * @small_buf_size: size of buffers to use with small buffer pool * @large_buf_size: size of buffers to use with large buffer pool (can be 0) + * @needs_bounce_fn: called to determine whether buffer needs bouncing * * This function should be called by low-level platform code to register * a device as requireing DMA buffer bouncing. The function will allocate * appropriate DMA pools for the device. - * */ extern int dmabounce_register_dev(struct device *, unsigned long, - unsigned long); + unsigned long, int (*)(struct device *, dma_addr_t, size_t)); /** * dmabounce_unregister_dev @@ -277,24 +277,6 @@ extern int dmabounce_register_dev(struct device *, unsigned long, */ extern void dmabounce_unregister_dev(struct device *); -/** - * dma_needs_bounce - * - * @dev: valid struct device pointer - * @dma_handle: dma_handle of unbounced buffer - * @size: size of region being mapped - * - * Platforms that utilize the dmabounce mechanism must implement - * this function. - * - * The dmabounce routines call this function whenever a dma-mapping - * is requested to determine whether a given buffer needs to be bounced - * or not. The function must return 0 if the buffer is OK for - * DMA access and 1 if the buffer needs to be bounced. - * - */ -extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); - /* * The DMA API, implemented by dmabounce.c. See below for descriptions. */ diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index e9a5893..d7db10c 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -316,6 +316,11 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r } +static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + return dev->bus == &pci_bus_type && (dma_addr + size) >= SZ_64M; +} + /* * Setup DMA mask to 64MB on PCI devices. Ignore all other devices. */ @@ -324,7 +329,7 @@ static int ixp4xx_pci_platform_notify(struct device *dev) if(dev->bus == &pci_bus_type) { *dev->dma_mask = SZ_64M - 1; dev->coherent_dma_mask = SZ_64M - 1; - dmabounce_register_dev(dev, 2048, 4096); + dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); } return 0; } @@ -337,11 +342,6 @@ static int ixp4xx_pci_platform_notify_remove(struct device *dev) return 0; } -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M); -} - void __init ixp4xx_pci_preinit(void) { unsigned long cpuid = read_cpuid_id(); -- cgit v0.10.2 From 5c8598fca1a359520623ed5409d23bb9e23d7da3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Jul 2011 08:34:33 +0100 Subject: ARM: dmabounce: no need to check dev->bus type in needs_bounce function As the needs_bounce function is passed at DMA bounce register time, we already know what the device bus type is, so we don't need to check it each time the needs_bounce function is called. Signed-off-by: Russell King diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 80b49e1..14ad62e 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -247,8 +247,7 @@ static int it8152_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t s { dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", __func__, dma_addr, size); - return dev->bus == &pci_bus_type && - (dma_addr + size - PHYS_OFFSET) >= SZ_64M; + return (dma_addr + size - PHYS_OFFSET) >= SZ_64M; } /* diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index d7db10c..e2e98bb 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -318,7 +318,7 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) { - return dev->bus == &pci_bus_type && (dma_addr + size) >= SZ_64M; + return (dma_addr + size) >= SZ_64M; } /* -- cgit v0.10.2 From 07ad6ab3d79ede41cd8a69499e81df7b405635d2 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Mon, 4 Jul 2011 03:56:15 -0700 Subject: omap: drop __initdata tags from static struct platform_device declarations Pointers to statically declared platform device structures which are registered with platform_device_register() are then used during run time to access these structure members, for example from platform_uevent() and much more. Therefore, these structures should never be placed inside sections which are dropped after boot. Fix platform devices incorrectly tagged with __initdata which happen to exist inside OMAP sub-trees. This bug has exhibited itself on my ARM/OMAP1 based Amstrad Delta videophone after commit 6d3163ce86dd386b4f7bda80241d7fea2bc0bb1d, "mm: check if any page in a pageblock is reserved before marking it MIGRATE_RESERVE", resulting in reading from several /sys/device/platform/*/uevent files always ending up with segmentation faults. Signed-off-by: Janusz Krzysztofik Acked-by: Felipe Balbi Cc: Varadarajan, Charulatha Cc: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index de88c92..f49ce85 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = { .delay = 9, }; -static struct platform_device ams_delta_kp_device __initdata = { +static struct platform_device ams_delta_kp_device = { .name = "omap-keypad", .id = -1, .dev = { @@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = { .resource = ams_delta_kp_resources, }; -static struct platform_device ams_delta_lcd_device __initdata = { +static struct platform_device ams_delta_lcd_device = { .name = "lcd_ams_delta", .id = -1, }; -static struct platform_device ams_delta_led_device __initdata = { +static struct platform_device ams_delta_led_device = { .name = "ams-delta-led", .id = -1 }; @@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = { .power = ams_delta_camera_power, }; -static struct platform_device ams_delta_camera_device __initdata = { +static struct platform_device ams_delta_camera_device = { .name = "soc-camera-pdrv", .id = 0, .dev = { diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 04c4b04..364137c 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .bank_stride = 1, }; -static struct __initdata platform_device omap15xx_mpu_gpio = { +static struct platform_device omap15xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .bank_width = 16, }; -static struct __initdata platform_device omap15xx_gpio = { +static struct platform_device omap15xx_gpio = { .name = "omap_gpio", .id = 1, .dev = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 5dd0d4c..293a246 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .bank_stride = 1, }; -static struct __initdata platform_device omap16xx_mpu_gpio = { +static struct platform_device omap16xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio1 = { +static struct platform_device omap16xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio2 = { +static struct platform_device omap16xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio3 = { +static struct platform_device omap16xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio4 = { +static struct platform_device omap16xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 1204c8b..c6ad248 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .bank_stride = 2, }; -static struct __initdata platform_device omap7xx_mpu_gpio = { +static struct platform_device omap7xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio1 = { +static struct platform_device omap7xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio2 = { +static struct platform_device omap7xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio3 = { +static struct platform_device omap7xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio4 = { +static struct platform_device omap7xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { @@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio5 = { +static struct platform_device omap7xx_gpio5 = { .name = "omap_gpio", .id = 5, .dev = { @@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio6 = { +static struct platform_device omap7xx_gpio6 = { .name = "omap_gpio", .id = 6, .dev = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9903667..88bd6f7 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -558,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev __initdata_or_module = { +static struct platform_device rx51_si4713_dev = { .name = "radio-si4713", .id = -1, .dev = { -- cgit v0.10.2 From 713d1369789f2a2336c3431b15276c968862bdb7 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 1 Jul 2011 13:56:13 -0600 Subject: ASoC: Tegra: I2S: Ensure clock is enabled when writing regs The I2S controller needs a clock to respond to register writes. Without this, register writes will at worst hang the CPU. In practice, I've only observed writes being dropped. Luckily, the dropped register writes historically had no effect: TEGRA_I2S_TIMING: The value we wrote was the reset default. TEGRA_I2S_FIFO_SCR: The default was for the FIFOs to request more data when one slot was empty. The requested value was for the FIFOs to request when four slots were empty. The DMA controller in the mainline kernel is configured to burst a single entry at a time into the FIFO, hence there was no issue. The only negative effect was on bus efficiency losses due to an increased number of arbitration attempts. However, in various non-upstream changes, the DMA controller now bursts four entries at a time into the FIFO. If there is only space for one entry, the data is simply dropped. In practice, this resulted in 3/4 of samples being dropped, and playback at 4x the expected rate and pitch. By fixing the clocking issue, this is solved. Signed-off-by: Stephen Warren Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/tegra/tegra_i2s.c b/sound/soc/tegra/tegra_i2s.c index 6b817e2..95f03c1 100644 --- a/sound/soc/tegra/tegra_i2s.c +++ b/sound/soc/tegra/tegra_i2s.c @@ -222,12 +222,18 @@ static int tegra_i2s_hw_params(struct snd_pcm_substream *substream, if (i2sclock % (2 * srate)) reg |= TEGRA_I2S_TIMING_NON_SYM_ENABLE; + if (!i2s->clk_refs) + clk_enable(i2s->clk_i2s); + tegra_i2s_write(i2s, TEGRA_I2S_TIMING, reg); tegra_i2s_write(i2s, TEGRA_I2S_FIFO_SCR, TEGRA_I2S_FIFO_SCR_FIFO2_ATN_LVL_FOUR_SLOTS | TEGRA_I2S_FIFO_SCR_FIFO1_ATN_LVL_FOUR_SLOTS); + if (!i2s->clk_refs) + clk_disable(i2s->clk_i2s); + return 0; } -- cgit v0.10.2 From 8e9ddf811ba021506d2316fcfe619faa0ab3f567 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 1 Jul 2011 17:24:46 -0700 Subject: ASoC: Ensure we delay long enough for WM8994 FLL to lock when starting This delay is very conservative. Signed-off-by: Mark Brown Acked-by: Liam Girdwood Cc: stable@kernel.org diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 970a95c..c2fc035 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1713,6 +1713,8 @@ static int _wm8994_set_fll(struct snd_soc_codec *codec, int id, int src, snd_soc_update_bits(codec, WM8994_FLL1_CONTROL_1 + reg_offset, WM8994_FLL1_ENA | WM8994_FLL1_FRAC, reg); + + msleep(5); } wm8994->fll[id].in = freq_in; -- cgit v0.10.2 From 64393b3ae4e3cc86e2d622f682d736ec973364b6 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 1 Jul 2011 12:25:24 +0200 Subject: AT91: Change nand buswidth logic to match hardware default configuration The recently modified nand buswitth configuration is not aligned with board reality: the double footprint on boards is always populated with 8bits buswidth nand flashes. So we have to consider that without particular configuration the 8bits buswidth is selected by default. Moreover, the previous logic was always using !board_have_nand_8bit(), we change it to a simpler: board_have_nand_16bit(). Signed-off-by: Nicolas Ferre Tested-by: Ludovic Desroches Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 1904fdf..cdb65d4 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); + cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index d600dc1..5c24074 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index f897f84..b60c22b 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 605b26f..9bbdc92 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 7624cf0..1325a50 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 063c95d..33eaa13 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index b855ee7..8f48660 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -13,13 +13,13 @@ * the 16-31 bit are reserved for at91 generic information * * bit 31: - * 0 => nand 16 bit - * 1 => nand 8 bit + * 0 => nand 8 bit + * 1 => nand 16 bit */ -#define BOARD_HAVE_NAND_8BIT (1 << 31) -static int inline board_have_nand_8bit(void) +#define BOARD_HAVE_NAND_16BIT (1 << 31) +static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_8BIT; + return system_rev & BOARD_HAVE_NAND_16BIT; } #endif /* __ARCH_SYSTEM_REV_H__ */ -- cgit v0.10.2 From b2bc4782191cb574924a1d09f48083ea8b33a93b Mon Sep 17 00:00:00 2001 From: Goldwyn Rodrigues Date: Mon, 4 Jul 2011 09:26:57 -0700 Subject: RDMA: Check for NULL mode in .devnode methods Commits 71c29bd5c235 ("IB/uverbs: Add devnode method to set path/mode") and c3af0980ce01 ("IB: Add devnode methods to cm_class and umad_class") added devnode methods that set the mode. However, these methods don't check for a NULL mode, and so we get a crash when unloading modules because devtmpfs_delete_node() calls device_get_devnode() with mode == NULL. Add the missing checks. Signed-off-by: Goldwyn Rodrigues [ Also fix cm.c. - Roland ] Signed-off-by: Roland Dreier Signed-off-by: Linus Torvalds diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index f62f52f..fc0f2bd 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3641,7 +3641,8 @@ static struct kobj_type cm_port_obj_type = { static char *cm_devnode(struct device *dev, mode_t *mode) { - *mode = 0666; + if (mode) + *mode = 0666; return kasprintf(GFP_KERNEL, "infiniband/%s", dev_name(dev)); } diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index e49a85f..56898b6 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -826,7 +826,8 @@ static void ib_uverbs_remove_one(struct ib_device *device) static char *uverbs_devnode(struct device *dev, mode_t *mode) { - *mode = 0666; + if (mode) + *mode = 0666; return kasprintf(GFP_KERNEL, "infiniband/%s", dev_name(dev)); } -- cgit v0.10.2 From fe0d42203cb5616eeff68b14576a0f7e2dd56625 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 4 Jul 2011 15:56:24 -0700 Subject: Linux 3.0-rc6 diff --git a/Makefile b/Makefile index dc67046..86f47a0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 0 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Sneaky Weasel # *DOCUMENTATION* -- cgit v0.10.2 From c349a528cd47e2272ded0ea358363855e86180da Mon Sep 17 00:00:00 2001 From: Marcus Meissner Date: Mon, 4 Jul 2011 01:30:29 +0000 Subject: net: bind() fix error return on wrong address family Hi, Reinhard Max also pointed out that the error should EAFNOSUPPORT according to POSIX. The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN. Other protocols error values in their af bind() methods in current mainline git as far as a brief look shows: EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25, No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip Ciao, Marcus Signed-off-by: Marcus Meissner Cc: Reinhard Max Signed-off-by: David S. Miller diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index eae1f67..ef1528a 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -465,8 +465,10 @@ int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) if (addr_len < sizeof(struct sockaddr_in)) goto out; - if (addr->sin_family != AF_INET) + if (addr->sin_family != AF_INET) { + err = -EAFNOSUPPORT; goto out; + } chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr); diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index d450a2f..3b5669a 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -274,7 +274,7 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) return -EINVAL; if (addr->sin6_family != AF_INET6) - return -EINVAL; + return -EAFNOSUPPORT; addr_type = ipv6_addr_type(&addr->sin6_addr); if ((addr_type & IPV6_ADDR_MULTICAST) && sock->type == SOCK_STREAM) -- cgit v0.10.2 From 9b9cfe7cf663c16c0d93349cc0094bb28ae7135a Mon Sep 17 00:00:00 2001 From: Kristoffer Glembo Date: Mon, 4 Jul 2011 21:39:10 -0700 Subject: greth: greth_set_mac_add would corrupt the MAC address. The MAC address was set using the signed char sockaddr->sa_addr field and thus the address could be corrupted through sign extension. Signed-off-by: Kristoffer Glembo Signed-off-by: David S. Miller diff --git a/drivers/net/greth.c b/drivers/net/greth.c index f181304..672f096 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -1015,11 +1015,10 @@ static int greth_set_mac_add(struct net_device *dev, void *p) return -EINVAL; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + GRETH_REGSAVE(regs->esa_msb, dev->dev_addr[0] << 8 | dev->dev_addr[1]); + GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 | + dev->dev_addr[4] << 8 | dev->dev_addr[5]); - GRETH_REGSAVE(regs->esa_msb, addr->sa_data[0] << 8 | addr->sa_data[1]); - GRETH_REGSAVE(regs->esa_lsb, - addr->sa_data[2] << 24 | addr-> - sa_data[3] << 16 | addr->sa_data[4] << 8 | addr->sa_data[5]); return 0; } -- cgit v0.10.2 From 1d08382a0e8a272fed9517a1b39ae6be634a77d5 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 8 Jun 2011 11:03:23 +0200 Subject: input: pmic8xxx-keypad: Do not use mfd_get_data() mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal Signed-off-by: Samuel Ortiz diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index 40b02ae..6229c3e 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -520,7 +520,8 @@ static void pmic8xxx_kp_close(struct input_dev *dev) */ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev) { - const struct pm8xxx_keypad_platform_data *pdata = mfd_get_data(pdev); + const struct pm8xxx_keypad_platform_data *pdata = + dev_get_platdata(&pdev->dev); const struct matrix_keymap_data *keymap_data; struct pmic8xxx_kp *kp; int rc; -- cgit v0.10.2 From 63ef1124f1cb07836f232b8eaed1ae4c73899643 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 8 Jun 2011 11:06:30 +0200 Subject: input: pmic8xxx-pwrkey: Do not use mfd_get_data() mfd_get_data() has been removed from the MFD API. Cc: Anirudh Ghayal Signed-off-by: Samuel Ortiz diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c index 97e07e7..b3cfb9c 100644 --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -90,7 +90,8 @@ static int __devinit pmic8xxx_pwrkey_probe(struct platform_device *pdev) unsigned int delay; u8 pon_cntl; struct pmic8xxx_pwrkey *pwrkey; - const struct pm8xxx_pwrkey_platform_data *pdata = mfd_get_data(pdev); + const struct pm8xxx_pwrkey_platform_data *pdata = + dev_get_platdata(&pdev->dev); if (!pdata) { dev_err(&pdev->dev, "power key platform data not supplied\n"); -- cgit v0.10.2 From 8f2df0147fc78804a869150e6439be2605b5dc2d Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Mon, 20 Jun 2011 15:22:56 +0200 Subject: Revert "mfd: Add omap-usbhs runtime PM support" This reverts commit 7e6502d577106fb5b202bbaac64c5f1b065e6daa. Oops are produced during initialization of ehci and ohci drivers. This is because the run time pm apis are used by the driver but the corresponding hwmod structures and initialization is not merged. hence revering back the commit id 7e6502d577106fb5b202bbaac64c5f1b065e6daa Signed-off-by: Keshava Munegowda Reported-by: Luciano Coelho Acked-by: Felipe Balbi Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 8552195..1717144 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -26,7 +26,6 @@ #include #include #include -#include #define USBHS_DRIVER_NAME "usbhs-omap" #define OMAP_EHCI_DEVICE "ehci-omap" @@ -147,6 +146,9 @@ struct usbhs_hcd_omap { + struct clk *usbhost_ick; + struct clk *usbhost_hs_fck; + struct clk *usbhost_fs_fck; struct clk *xclk60mhsp1_ck; struct clk *xclk60mhsp2_ck; struct clk *utmi_p1_fck; @@ -156,6 +158,8 @@ struct usbhs_hcd_omap { struct clk *usbhost_p2_fck; struct clk *usbtll_p2_fck; struct clk *init_60m_fclk; + struct clk *usbtll_fck; + struct clk *usbtll_ick; void __iomem *uhh_base; void __iomem *tll_base; @@ -349,13 +353,46 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) omap->platdata.ehci_data = pdata->ehci_data; omap->platdata.ohci_data = pdata->ohci_data; - pm_runtime_enable(&pdev->dev); + omap->usbhost_ick = clk_get(dev, "usbhost_ick"); + if (IS_ERR(omap->usbhost_ick)) { + ret = PTR_ERR(omap->usbhost_ick); + dev_err(dev, "usbhost_ick failed error:%d\n", ret); + goto err_end; + } + + omap->usbhost_hs_fck = clk_get(dev, "hs_fck"); + if (IS_ERR(omap->usbhost_hs_fck)) { + ret = PTR_ERR(omap->usbhost_hs_fck); + dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret); + goto err_usbhost_ick; + } + + omap->usbhost_fs_fck = clk_get(dev, "fs_fck"); + if (IS_ERR(omap->usbhost_fs_fck)) { + ret = PTR_ERR(omap->usbhost_fs_fck); + dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret); + goto err_usbhost_hs_fck; + } + + omap->usbtll_fck = clk_get(dev, "usbtll_fck"); + if (IS_ERR(omap->usbtll_fck)) { + ret = PTR_ERR(omap->usbtll_fck); + dev_err(dev, "usbtll_fck failed error:%d\n", ret); + goto err_usbhost_fs_fck; + } + + omap->usbtll_ick = clk_get(dev, "usbtll_ick"); + if (IS_ERR(omap->usbtll_ick)) { + ret = PTR_ERR(omap->usbtll_ick); + dev_err(dev, "usbtll_ick failed error:%d\n", ret); + goto err_usbtll_fck; + } omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); if (IS_ERR(omap->utmi_p1_fck)) { ret = PTR_ERR(omap->utmi_p1_fck); dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_end; + goto err_usbtll_ick; } omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); @@ -485,8 +522,22 @@ err_xclk60mhsp1_ck: err_utmi_p1_fck: clk_put(omap->utmi_p1_fck); +err_usbtll_ick: + clk_put(omap->usbtll_ick); + +err_usbtll_fck: + clk_put(omap->usbtll_fck); + +err_usbhost_fs_fck: + clk_put(omap->usbhost_fs_fck); + +err_usbhost_hs_fck: + clk_put(omap->usbhost_hs_fck); + +err_usbhost_ick: + clk_put(omap->usbhost_ick); + err_end: - pm_runtime_disable(&pdev->dev); kfree(omap); end_probe: @@ -520,7 +571,11 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) clk_put(omap->utmi_p2_fck); clk_put(omap->xclk60mhsp1_ck); clk_put(omap->utmi_p1_fck); - pm_runtime_disable(&pdev->dev); + clk_put(omap->usbtll_ick); + clk_put(omap->usbtll_fck); + clk_put(omap->usbhost_fs_fck); + clk_put(omap->usbhost_hs_fck); + clk_put(omap->usbhost_ick); kfree(omap); return 0; @@ -640,6 +695,7 @@ static int usbhs_enable(struct device *dev) struct usbhs_omap_platform_data *pdata = &omap->platdata; unsigned long flags = 0; int ret = 0; + unsigned long timeout; unsigned reg; dev_dbg(dev, "starting TI HSUSB Controller\n"); @@ -652,7 +708,11 @@ static int usbhs_enable(struct device *dev) if (omap->count > 0) goto end_count; - pm_runtime_get_sync(dev); + clk_enable(omap->usbhost_ick); + clk_enable(omap->usbhost_hs_fck); + clk_enable(omap->usbhost_fs_fck); + clk_enable(omap->usbtll_fck); + clk_enable(omap->usbtll_ick); if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) { @@ -676,6 +736,50 @@ static int usbhs_enable(struct device *dev) omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); + /* perform TLL soft reset, and wait until reset is complete */ + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_SOFTRESET); + + /* Wait for TLL reset to complete */ + timeout = jiffies + msecs_to_jiffies(1000); + while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) + & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + dev_dbg(dev, "operation timed out\n"); + ret = -EINVAL; + goto err_tll; + } + } + + dev_dbg(dev, "TLL RESET DONE\n"); + + /* (1<<3) = no idle mode only for initial debugging */ + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | + OMAP_USBTLL_SYSCONFIG_SIDLEMODE | + OMAP_USBTLL_SYSCONFIG_AUTOIDLE); + + /* Put UHH in NoIdle/NoStandby mode */ + reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG); + if (is_omap_usbhs_rev1(omap)) { + reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP + | OMAP_UHH_SYSCONFIG_SIDLEMODE + | OMAP_UHH_SYSCONFIG_CACTIVITY + | OMAP_UHH_SYSCONFIG_MIDLEMODE); + reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; + + + } else if (is_omap_usbhs_rev2(omap)) { + reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; + reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; + reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; + reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; + } + + usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); + reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); /* setup ULPI bypass and burst configurations */ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN @@ -815,8 +919,6 @@ end_count: return 0; err_tll: - pm_runtime_put_sync(dev); - spin_unlock_irqrestore(&omap->lock, flags); if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) gpio_free(pdata->ehci_data->reset_gpio_port[0]); @@ -824,6 +926,13 @@ err_tll: if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) gpio_free(pdata->ehci_data->reset_gpio_port[1]); } + + clk_disable(omap->usbtll_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbhost_fs_fck); + clk_disable(omap->usbhost_hs_fck); + clk_disable(omap->usbhost_ick); + spin_unlock_irqrestore(&omap->lock, flags); return ret; } @@ -896,7 +1005,11 @@ static void usbhs_disable(struct device *dev) clk_disable(omap->utmi_p1_fck); } - pm_runtime_put_sync(dev); + clk_disable(omap->usbtll_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbhost_fs_fck); + clk_disable(omap->usbhost_hs_fck); + clk_disable(omap->usbhost_ick); /* The gpio_free migh sleep; so unlock the spinlock */ spin_unlock_irqrestore(&omap->lock, flags); -- cgit v0.10.2 From 1e8ece5cb85361ac01c95aecdfdbfa5f8b7242af Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 23 Jun 2011 10:17:43 +0800 Subject: mfd: Fix build error for tps65911-comparator.c Fix below build error: CC drivers/mfd/tps65911-comparator.o drivers/mfd/tps65911-comparator.c: In function 'tps65911_comparator_probe': drivers/mfd/tps65911-comparator.c:131: error: 'struct tps65910_platform_data' has no member named 'vmbch_threshold' drivers/mfd/tps65911-comparator.c:137: error: 'struct tps65910_platform_data' has no member named 'vmbch2_threshold' make[2]: *** [drivers/mfd/tps65911-comparator.o] Error 1 make[1]: *** [drivers/mfd] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c index 3d2dc56..283ac67 100644 --- a/drivers/mfd/tps65911-comparator.c +++ b/drivers/mfd/tps65911-comparator.c @@ -125,7 +125,7 @@ static DEVICE_ATTR(comp2_threshold, S_IRUGO, comp_threshold_show, NULL); static __devinit int tps65911_comparator_probe(struct platform_device *pdev) { struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); - struct tps65910_platform_data *pdata = dev_get_platdata(tps65910->dev); + struct tps65910_board *pdata = dev_get_platdata(tps65910->dev); int ret; ret = comp_threshold_set(tps65910, COMP1, pdata->vmbch_threshold); -- cgit v0.10.2 From 8509e142567d69e170a184ecf27d7a6a3239fd72 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 23 Jun 2011 10:15:51 +0800 Subject: mfd: Add Makefile and Kconfig Entries for tps65911 comparator Base on Mark's comment [1], I make the Kconfig entry invisible to users. [1] https://lkml.org/lkml/2011/5/14/136 Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 0f09c05..6ca938a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -728,6 +728,9 @@ config MFD_TPS65910 if you say yes here you get support for the TPS65910 series of Power Management chips. +config TPS65911_COMPARATOR + tristate + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index efe3cc3..d7d47d2 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -94,3 +94,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o +obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o -- cgit v0.10.2 From e4c2fb0d5776b58049d2556b456144a4db3fe5a9 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 5 Jul 2011 10:56:32 +0200 Subject: sched: Disable (revert) SCHED_LOAD_SCALE increase Alex reported that commit c8b281161df ("sched: Increase SCHED_LOAD_SCALE resolution") caused a power usage regression under light load as it increases the number of load-balance operations and keeps idle cpus from staying idle. Time has run out to find the root cause for this release so disable the feature for v3.0 until we can figure out what causes the problem. Reported-by: "Alex, Shi" Signed-off-by: Peter Zijlstra Cc: Nikhil Rao Cc: Ming Lei Cc: Mike Galbraith Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/n/tip-m4onxn0sxnyn5iz9o88eskc3@git.kernel.org Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index a837b20..496770a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -808,7 +808,7 @@ enum cpu_idle_type { * when BITS_PER_LONG <= 32 are pretty high and the returns do not justify the * increased costs. */ -#if BITS_PER_LONG > 32 +#if 0 /* BITS_PER_LONG > 32 -- currently broken: it increases power usage under light load */ # define SCHED_LOAD_RESOLUTION 10 # define scale_load(w) ((w) << SCHED_LOAD_RESOLUTION) # define scale_load_down(w) ((w) >> SCHED_LOAD_RESOLUTION) -- cgit v0.10.2 From f4f38430c94c38187db73a2cf3892cc8b12a2713 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 Jul 2011 14:38:12 +0100 Subject: ARM: 6989/1: perf: do not start the PMU when no events are present armpmu_enable can be called in situations where no events are present (for example, from the event rotation tick after a profiled task has exited). In this case, we currently start the PMU anyway which may leave it active inevitably without any events being monitored. This patch adds a simple check to the enabling code so that we avoid starting the PMU when no events are present. Cc: Reported-by: Ashwin Chaugle Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d53c0ab..2b5b142 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event) static void armpmu_enable(struct pmu *pmu) { /* Enable all of the perf events on hardware. */ - int idx; + int idx, enabled = 0; struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); if (!armpmu) @@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu) continue; armpmu->enable(&event->hw, idx); + enabled = 1; } - armpmu->start(); + if (enabled) + armpmu->start(); } static void armpmu_disable(struct pmu *pmu) -- cgit v0.10.2 From 6f96521fab978046070a697926cf351c2c37af29 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 Jul 2011 14:38:53 +0100 Subject: ARM: 6990/1: MAINTAINERS: add entry for ARM PMU profiling and debugging Following a request from Russell King: http://lists.infradead.org/pipermail/linux-arm-kernel/2011-June/055031.html Add myself as the ARM PMU profiling and debugging maintainer. This covers the ARM implementations of perf, oprofile and hw_breakpoint along with the glue for this to work on different platforms. Cc: Jean Pihet Acked-by: Jamie Iles Acked-by: Linus Walleij Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/MAINTAINERS b/MAINTAINERS index d2dcef7..ec32825 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -594,6 +594,16 @@ S: Maintained F: arch/arm/lib/floppydma.S F: arch/arm/include/asm/floppy.h +ARM PMU PROFILING AND DEBUGGING +M: Will Deacon +S: Maintained +F: arch/arm/kernel/perf_event* +F: arch/arm/oprofile/common.c +F: arch/arm/kernel/pmu.c +F: arch/arm/include/asm/pmu.h +F: arch/arm/kernel/hw_breakpoint.c +F: arch/arm/include/asm/hw_breakpoint.h + ARM PORT M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v0.10.2 From 873bd4cb4fbba6a3e99f750e17ef2ba6ef96e9d3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 5 Jul 2011 09:25:59 +0200 Subject: ASoC: Don't set invalid name string to snd_card->driver field The snd_card->driver field contains a driver name string, and in general it shouldn't contain space or special letters. The commit 2b39535b9e54888649923beaab443af212b6c0fd changed the string copy from card->name, but the long name string may contain such letters, thus it may still lead to a segfault. A temporary fix is not to copy the long name string but just keep it empty as the earlier version did. Reported-by: Kuninori Morimoto Acked-by: Liam Girdwood Signed-off-by: Takashi Iwai diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index d75043e..b194be0 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1929,8 +1929,9 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card) "%s", card->name); snprintf(card->snd_card->longname, sizeof(card->snd_card->longname), "%s", card->long_name ? card->long_name : card->name); - snprintf(card->snd_card->driver, sizeof(card->snd_card->driver), - "%s", card->driver_name ? card->driver_name : card->name); + if (card->driver_name) + strlcpy(card->snd_card->driver, card->driver_name, + sizeof(card->snd_card->driver)); if (card->late_probe) { ret = card->late_probe(card); -- cgit v0.10.2 From 4c7c5374ce6876d3d2c7013ef815051df4258952 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jul 2011 10:27:51 -0700 Subject: ASoC: Manage WM8731 ACTIVE bit as a supply widget Now we have supply widgets there's no need to open code the handling of the ACTIVE bit. Signed-off-by: Mark Brown Tested-by: Nicolas Ferre Acked-by: Liam Girdwood diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 2dc964b..76b4361 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -175,6 +175,7 @@ static const struct snd_kcontrol_new wm8731_input_mux_controls = SOC_DAPM_ENUM("Input Select", wm8731_insel_enum); static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = { +SND_SOC_DAPM_SUPPLY("ACTIVE",WM8731_ACTIVE, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("OSC", WM8731_PWR, 5, 1, NULL, 0), SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, &wm8731_output_mixer_controls[0], @@ -204,6 +205,8 @@ static int wm8731_check_osc(struct snd_soc_dapm_widget *source, static const struct snd_soc_dapm_route wm8731_intercon[] = { {"DAC", NULL, "OSC", wm8731_check_osc}, {"ADC", NULL, "OSC", wm8731_check_osc}, + {"DAC", NULL, "ACTIVE"}, + {"ADC", NULL, "ACTIVE"}, /* output mixer */ {"Output Mixer", "Line Bypass Switch", "Line Input"}, @@ -315,29 +318,6 @@ static int wm8731_hw_params(struct snd_pcm_substream *substream, return 0; } -static int wm8731_pcm_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct snd_soc_codec *codec = dai->codec; - - /* set active */ - snd_soc_write(codec, WM8731_ACTIVE, 0x0001); - - return 0; -} - -static void wm8731_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct snd_soc_codec *codec = dai->codec; - - /* deactivate */ - if (!codec->active) { - udelay(50); - snd_soc_write(codec, WM8731_ACTIVE, 0x0); - } -} - static int wm8731_mute(struct snd_soc_dai *dai, int mute) { struct snd_soc_codec *codec = dai->codec; @@ -480,7 +460,6 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec, snd_soc_write(codec, WM8731_PWR, reg | 0x0040); break; case SND_SOC_BIAS_OFF: - snd_soc_write(codec, WM8731_ACTIVE, 0x0); snd_soc_write(codec, WM8731_PWR, 0xffff); regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); @@ -496,9 +475,7 @@ static int wm8731_set_bias_level(struct snd_soc_codec *codec, SNDRV_PCM_FMTBIT_S24_LE) static struct snd_soc_dai_ops wm8731_dai_ops = { - .prepare = wm8731_pcm_prepare, .hw_params = wm8731_hw_params, - .shutdown = wm8731_shutdown, .digital_mute = wm8731_mute, .set_sysclk = wm8731_set_dai_sysclk, .set_fmt = wm8731_set_dai_fmt, -- cgit v0.10.2 From 95acbd432b4c6498c5b4b2f92e0e05e3c032d4f8 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Wed, 29 Jun 2011 15:39:37 -0400 Subject: ath5k: fix incorrect use of drvdata in sysfs code Signed-off-by: Pavel Roskin Cc: Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c index 929c68c..a073cdc 100644 --- a/drivers/net/wireless/ath/ath5k/sysfs.c +++ b/drivers/net/wireless/ath/ath5k/sysfs.c @@ -10,7 +10,8 @@ static ssize_t ath5k_attr_show_##name(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_softc *sc = hw->priv; \ return snprintf(buf, PAGE_SIZE, "%d\n", get); \ } \ \ @@ -18,7 +19,8 @@ static ssize_t ath5k_attr_store_##name(struct device *dev, \ struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_softc *sc = hw->priv; \ int val; \ \ val = (int)simple_strtoul(buf, NULL, 10); \ @@ -33,7 +35,8 @@ static ssize_t ath5k_attr_show_##name(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ - struct ath5k_softc *sc = dev_get_drvdata(dev); \ + struct ieee80211_hw *hw = dev_get_drvdata(dev); \ + struct ath5k_softc *sc = hw->priv; \ return snprintf(buf, PAGE_SIZE, "%d\n", get); \ } \ static DEVICE_ATTR(name, S_IRUGO, ath5k_attr_show_##name, NULL) -- cgit v0.10.2 From 37000b305bff81bb1ee2f7f37b1319b670a08f76 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Wed, 29 Jun 2011 15:39:43 -0400 Subject: ath5k: fix incorrect use of drvdata in PCI suspend/resume code Signed-off-by: Pavel Roskin Cc: Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c index 296c316..f2c0c23 100644 --- a/drivers/net/wireless/ath/ath5k/pci.c +++ b/drivers/net/wireless/ath/ath5k/pci.c @@ -297,7 +297,9 @@ ath5k_pci_remove(struct pci_dev *pdev) #ifdef CONFIG_PM_SLEEP static int ath5k_pci_suspend(struct device *dev) { - struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev)); + struct pci_dev *pdev = to_pci_dev(dev); + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_softc *sc = hw->priv; ath5k_led_off(sc); return 0; @@ -306,7 +308,8 @@ static int ath5k_pci_suspend(struct device *dev) static int ath5k_pci_resume(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - struct ath5k_softc *sc = pci_get_drvdata(pdev); + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath5k_softc *sc = hw->priv; /* * Suspend/Resume resets the PCI configuration space, so we have to -- cgit v0.10.2 From c10841ca722a0bc960dc541c51582773f9a24f98 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 30 Jun 2011 08:32:41 +0300 Subject: cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex There was a deadlock when rfkill-blocking a wireless interface, because we were locking the rdev mutex on NETDEV_GOING_DOWN to stop sched_scans that were eventually running. The rfkill block code was already holding a mutex under rdev: kernel: ======================================================= kernel: [ INFO: possible circular locking dependency detected ] kernel: 3.0.0-rc1-00049-g1fa7b6a #57 kernel: ------------------------------------------------------- kernel: kworker/0:1/4525 is trying to acquire lock: kernel: (&rdev->mtx){+.+.+.}, at: [] cfg80211_netdev_notifier_call+0x131/0x5b0 kernel: kernel: but task is already holding lock: kernel: (&rdev->devlist_mtx){+.+.+.}, at: [] cfg80211_rfkill_set_block+0x4f/0xa0 kernel: kernel: which lock already depends on the new lock. To fix this, add a new mutex specifically for sched_scan, to protect the sched_scan_req element in the rdev struct, instead of using the global rdev mutex. Reported-by: Duane Griffin Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville diff --git a/net/wireless/core.c b/net/wireless/core.c index c22ef34..880dbe2 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -366,6 +366,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) mutex_init(&rdev->mtx); mutex_init(&rdev->devlist_mtx); + mutex_init(&rdev->sched_scan_mtx); INIT_LIST_HEAD(&rdev->netdev_list); spin_lock_init(&rdev->bss_lock); INIT_LIST_HEAD(&rdev->bss_list); @@ -701,6 +702,7 @@ void cfg80211_dev_free(struct cfg80211_registered_device *rdev) rfkill_destroy(rdev->rfkill); mutex_destroy(&rdev->mtx); mutex_destroy(&rdev->devlist_mtx); + mutex_destroy(&rdev->sched_scan_mtx); list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list) cfg80211_put_bss(&scan->pub); cfg80211_rdev_free_wowlan(rdev); @@ -737,12 +739,16 @@ static void wdev_cleanup_work(struct work_struct *work) ___cfg80211_scan_done(rdev, true); } + cfg80211_unlock_rdev(rdev); + + mutex_lock(&rdev->sched_scan_mtx); + if (WARN_ON(rdev->sched_scan_req && rdev->sched_scan_req->dev == wdev->netdev)) { __cfg80211_stop_sched_scan(rdev, false); } - cfg80211_unlock_rdev(rdev); + mutex_unlock(&rdev->sched_scan_mtx); mutex_lock(&rdev->devlist_mtx); rdev->opencount--; @@ -830,9 +836,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, break; case NL80211_IFTYPE_P2P_CLIENT: case NL80211_IFTYPE_STATION: - cfg80211_lock_rdev(rdev); + mutex_lock(&rdev->sched_scan_mtx); __cfg80211_stop_sched_scan(rdev, false); - cfg80211_unlock_rdev(rdev); + mutex_unlock(&rdev->sched_scan_mtx); wdev_lock(wdev); #ifdef CONFIG_CFG80211_WEXT diff --git a/net/wireless/core.h b/net/wireless/core.h index 3dce1f1..a570ff9 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -65,6 +65,8 @@ struct cfg80211_registered_device { struct work_struct scan_done_wk; struct work_struct sched_scan_results_wk; + struct mutex sched_scan_mtx; + #ifdef CONFIG_NL80211_TESTMODE struct genl_info *testmode_info; #endif diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f07602d..cea3381 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3461,9 +3461,6 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE])) return -EINVAL; - if (rdev->sched_scan_req) - return -EINPROGRESS; - if (!info->attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]) return -EINVAL; @@ -3502,12 +3499,21 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, if (ie_len > wiphy->max_scan_ie_len) return -EINVAL; + mutex_lock(&rdev->sched_scan_mtx); + + if (rdev->sched_scan_req) { + err = -EINPROGRESS; + goto out; + } + request = kzalloc(sizeof(*request) + sizeof(*request->ssids) * n_ssids + sizeof(*request->channels) * n_channels + ie_len, GFP_KERNEL); - if (!request) - return -ENOMEM; + if (!request) { + err = -ENOMEM; + goto out; + } if (n_ssids) request->ssids = (void *)&request->channels[n_channels]; @@ -3605,6 +3611,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, out_free: kfree(request); out: + mutex_unlock(&rdev->sched_scan_mtx); return err; } @@ -3612,12 +3619,17 @@ static int nl80211_stop_sched_scan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; + int err; if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) || !rdev->ops->sched_scan_stop) return -EOPNOTSUPP; - return __cfg80211_stop_sched_scan(rdev, false); + mutex_lock(&rdev->sched_scan_mtx); + err = __cfg80211_stop_sched_scan(rdev, false); + mutex_unlock(&rdev->sched_scan_mtx); + + return err; } static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags, diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 7a6c676..ae0c225 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -100,14 +100,14 @@ void __cfg80211_sched_scan_results(struct work_struct *wk) rdev = container_of(wk, struct cfg80211_registered_device, sched_scan_results_wk); - cfg80211_lock_rdev(rdev); + mutex_lock(&rdev->sched_scan_mtx); /* we don't have sched_scan_req anymore if the scan is stopping */ if (rdev->sched_scan_req) nl80211_send_sched_scan_results(rdev, rdev->sched_scan_req->dev); - cfg80211_unlock_rdev(rdev); + mutex_unlock(&rdev->sched_scan_mtx); } void cfg80211_sched_scan_results(struct wiphy *wiphy) @@ -123,9 +123,9 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy) { struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); - cfg80211_lock_rdev(rdev); + mutex_lock(&rdev->sched_scan_mtx); __cfg80211_stop_sched_scan(rdev, true); - cfg80211_unlock_rdev(rdev); + mutex_unlock(&rdev->sched_scan_mtx); } EXPORT_SYMBOL(cfg80211_sched_scan_stopped); @@ -135,7 +135,7 @@ int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, int err; struct net_device *dev; - ASSERT_RDEV_LOCK(rdev); + lockdep_assert_held(&rdev->sched_scan_mtx); if (!rdev->sched_scan_req) return 0; -- cgit v0.10.2 From 06a86ddbf557cb8a0f7ded54e872e9d456002d52 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 30 Jun 2011 21:06:17 +0200 Subject: carl9170: add NEC WL300NU-AG usbid Cc: stable@kernel.org Reported-by: Mark Davis Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 2fb53d0..333b69e 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -112,6 +112,8 @@ static struct usb_device_id carl9170_usb_ids[] = { { USB_DEVICE(0x04bb, 0x093f) }, /* NEC WL300NU-G */ { USB_DEVICE(0x0409, 0x0249) }, + /* NEC WL300NU-AG */ + { USB_DEVICE(0x0409, 0x02b4) }, /* AVM FRITZ!WLAN USB Stick N */ { USB_DEVICE(0x057c, 0x8401) }, /* AVM FRITZ!WLAN USB Stick N 2.4 */ -- cgit v0.10.2 From 4f6760b01bda625e9555e16d8e9ba8126a9c9498 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 1 Jul 2011 18:37:33 +0530 Subject: ath9k: Fix tx throughput drops for AR9003 chips with AES encryption While sending aggregated frames in AES, the AR5416 chips required additional padding b/w subframes. This workaround is not needed for edma (AR9003 family) chips. With this patch ~4Mbps thoughput improvement was observed in clear environment. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 3779b89..33443bc 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -671,7 +671,8 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid, * TODO - this could be improved to be dependent on the rate. * The hardware can keep up at lower rates, but not higher rates */ - if (fi->keyix != ATH9K_TXKEYIX_INVALID) + if ((fi->keyix != ATH9K_TXKEYIX_INVALID) && + !(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)) ndelim += ATH_AGGR_ENCRYPTDELIM; /* -- cgit v0.10.2 From 35cbcbc6f39da30c39bc0a1e679ec44506c4eb3d Mon Sep 17 00:00:00 2001 From: Yoann DI-RUZZA Date: Fri, 1 Jul 2011 08:47:17 -0500 Subject: rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000M Signed-off-by: Yoann DI-RUZZA Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 092e342..942f7a3 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -298,6 +298,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { {RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/ {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/ {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/ + {RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/ {RTL_USB_DEVICE(0x0Df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/ {RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/ /* HP - Lite-On ,8188CUS Slim Combo */ -- cgit v0.10.2 From 0371d3f7e8f1cddaee1f215e42c09a40e235d810 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 5 Jul 2011 19:58:29 +0100 Subject: ARM: move memory layout sanity checking before meminfo initialization Ensure that the meminfo array is sanity checked before we pass the memory to memblock. This helps to ensure that memblock and meminfo agree on the dimensions of memory, especially when more memory is passed than the kernel can deal with. Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index ed11fb0..acbb447 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup); #endif extern void paging_init(struct machine_desc *desc); +extern void sanity_check_meminfo(void); extern void reboot_setup(char *str); unsigned int processor_id; @@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + sanity_check_meminfo(); arm_memblock_init(&meminfo, mdesc); paging_init(mdesc); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9d9e736..594d677 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc); static phys_addr_t lowmem_limit __initdata = 0; -static void __init sanity_check_meminfo(void) +void __init sanity_check_meminfo(void) { int i, j, highmem = 0; @@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; + memblock_set_current_limit(lowmem_limit); + build_mem_type_table(); - sanity_check_meminfo(); prepare_page_table(); map_lowmem(); devicemaps_init(mdesc); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 687d023..941a98c 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void) memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); } +void __init sanity_check_meminfo(void) +{ +} + /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. -- cgit v0.10.2 From a0d8efedb203b5b908dd46cea38201761e2380f9 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Thu, 16 Jun 2011 16:12:35 +0900 Subject: ARM: EXYNOS4: Fix card detection for sdhci 0 and 2 On SMDKV310 board, a card detect gpio pin is available that is directly connected to the io pad of the sdhci controller. Fix incorrect value of cd_type field in platform data for sdhci instance 0 and 2. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 1526764..edd8141 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, @@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, -- cgit v0.10.2 From a3df1d4811bb7710d6497334e3b6a37064527684 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Chatradhi Date: Thu, 16 Jun 2011 19:33:29 +0900 Subject: ARM: EXYNOS4: fix improper gpio configuration These pins are incorrectly configured for PCM2 configure them to SPDIF(_OUT & _EXT_CLK) Signed-off-by: Naveen Krishna Chatradhi Acked-by: Jassi Brar Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index 1eed5f9..983069a 100644 --- a/arch/arm/mach-exynos4/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = { static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4)); return 0; } -- cgit v0.10.2 From bb8bb57b213f63ffba29b3a7f1c7974782b8127d Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Wed, 22 Jun 2011 18:03:21 +0900 Subject: ARM: SAMSUNG: header file revised to prevent declaring duplicated There has been no #ifndef - #define - #endif protection for this header file. Signed-off-by: MyungJoo Ham Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 4af108f..e3b31c2 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -12,6 +12,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifndef __PLAT_DEVS_H +#define __PLAT_DEVS_H __FILE__ + #include struct s3c24xx_uart_resources { @@ -159,3 +163,5 @@ extern struct platform_device s3c_device_ac97; */ extern void *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev); + +#endif /* __PLAT_DEVS_H */ -- cgit v0.10.2 From 27ea7fd2889eb93041480b18de655b1ff003e05d Mon Sep 17 00:00:00 2001 From: Sangbeom Kim Date: Thu, 23 Jun 2011 21:43:58 +0900 Subject: ARM: S5P: Fix bug on init of PWMTimers for HRTimer This patch fixes following. <6>[ 0.000000] sched_clock: 32 bits at 33MHz, ... <6>[ 128.651309] Calibrating delay loop... There is a big jump. The reason is that PWM Timer which is for HRTimer was used before its initialization. So this patch changes its order and following is kernel boot log message after this. <6>[ 0.000000] sched_clock: 32 bits at 33MHz, ... <6>[ 0.000088] Calibrating delay loop... Signed-off-by: Sangbeom Kim Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c index 899a8cc..612934c 100644 --- a/arch/arm/plat-s5p/s5p-time.c +++ b/arch/arm/plat-s5p/s5p-time.c @@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void) clock_rate = clk_get_rate(tin_source); - init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); - s5p_time_setup(timer_source.source_id, TCNT_MAX); s5p_time_start(timer_source.source_id, PERIODIC); + init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + if (clocksource_register_hz(&time_clocksource, clock_rate)) panic("%s: can't register clocksource\n", time_clocksource.name); } -- cgit v0.10.2 From 152c036a8096ed219c965957acb63490a2c0c963 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Mon, 4 Jul 2011 19:03:54 +0900 Subject: ARM: EXYNOS4: Address a section mismatch w/ suspend issue. The section mismatch in headsmp.S made hotplug stop working after the first instance of suspend-to-RAM and its wakeup. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos4/headsmp.S index 6c6cfc5..3cdeb36 100644 --- a/arch/arm/mach-exynos4/headsmp.S +++ b/arch/arm/mach-exynos4/headsmp.S @@ -13,7 +13,7 @@ #include #include - __INIT + __CPUINIT /* * exynos4 specific entry point for secondary CPUs. This provides -- cgit v0.10.2 From 44661462ee1ee3c922754fc1f246867f0d01e7ea Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 5 Jul 2011 13:58:33 +0000 Subject: bridge: Always flood broadcast packets As is_multicast_ether_addr returns true on broadcast packets as well, we need to explicitly exclude broadcast packets so that they're always flooded. This wasn't an issue before as broadcast packets were considered to be an unregistered multicast group, which were always flooded. However, as we now only flood such packets to router ports, this is no longer acceptable. Reported-by: Michael Guntsche Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index c188c80..32b8f9f 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -49,7 +49,9 @@ netdev_tx_t br_dev_xmit(struct sk_buff *skb, struct net_device *dev) skb_pull(skb, ETH_HLEN); rcu_read_lock(); - if (is_multicast_ether_addr(dest)) { + if (is_broadcast_ether_addr(dest)) + br_flood_deliver(br, skb); + else if (is_multicast_ether_addr(dest)) { if (unlikely(netpoll_tx_running(dev))) { br_flood_deliver(br, skb); goto out; diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index f3ac1e8..f06ee39 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -60,7 +60,7 @@ int br_handle_frame_finish(struct sk_buff *skb) br = p->br; br_fdb_update(br, p, eth_hdr(skb)->h_source); - if (is_multicast_ether_addr(dest) && + if (!is_broadcast_ether_addr(dest) && is_multicast_ether_addr(dest) && br_multicast_rcv(br, p, skb)) goto drop; @@ -77,7 +77,9 @@ int br_handle_frame_finish(struct sk_buff *skb) dst = NULL; - if (is_multicast_ether_addr(dest)) { + if (is_broadcast_ether_addr(dest)) + skb2 = skb; + else if (is_multicast_ether_addr(dest)) { mdst = br_mdb_get(br, skb); if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb)) { if ((mdst && mdst->mglist) || -- cgit v0.10.2 From 5318d809d7b4975ce5e5303e8508f89a5458c2b6 Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Tue, 5 Jul 2011 14:34:05 +0000 Subject: vmxnet3: fix starving rx ring whenoc_skb kb fails If the rx ring is completely empty, then the device may never fire an rx interrupt. Unfortunately, the rx interrupt is what triggers populating the rx ring with fresh buffers, so this will cause networking to lock up. This patch replenishes the skb in recv descriptor as soon as it is peeled off while processing rx completions. If the skb/buffer allocation fails, existing one is recycled and the packet in hand is dropped. This way none of the RX desc is ever left empty, thus avoiding starvation Signed-off-by: Scott J. Goldman Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index fa6e2ac..45a23b2 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -575,7 +575,7 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx]; u32 val; - while (num_allocated < num_to_alloc) { + while (num_allocated <= num_to_alloc) { struct vmxnet3_rx_buf_info *rbi; union Vmxnet3_GenericDesc *gd; @@ -621,9 +621,15 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, BUG_ON(rbi->dma_addr == 0); gd->rxd.addr = cpu_to_le64(rbi->dma_addr); - gd->dword[2] = cpu_to_le32((ring->gen << VMXNET3_RXD_GEN_SHIFT) + gd->dword[2] = cpu_to_le32((!ring->gen << VMXNET3_RXD_GEN_SHIFT) | val | rbi->len); + /* Fill the last buffer but dont mark it ready, or else the + * device will think that the queue is full */ + if (num_allocated == num_to_alloc) + break; + + gd->dword[2] |= cpu_to_le32(ring->gen << VMXNET3_RXD_GEN_SHIFT); num_allocated++; vmxnet3_cmd_ring_adv_next2fill(ring); } @@ -1140,6 +1146,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2 }; u32 num_rxd = 0; + bool skip_page_frags = false; struct Vmxnet3_RxCompDesc *rcd; struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx; #ifdef __BIG_ENDIAN_BITFIELD @@ -1150,11 +1157,12 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, &rxComp); while (rcd->gen == rq->comp_ring.gen) { struct vmxnet3_rx_buf_info *rbi; - struct sk_buff *skb; + struct sk_buff *skb, *new_skb = NULL; + struct page *new_page = NULL; int num_to_alloc; struct Vmxnet3_RxDesc *rxd; u32 idx, ring_idx; - + struct vmxnet3_cmd_ring *ring = NULL; if (num_rxd >= quota) { /* we may stop even before we see the EOP desc of * the current pkt @@ -1165,6 +1173,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, BUG_ON(rcd->rqID != rq->qid && rcd->rqID != rq->qid2); idx = rcd->rxdIdx; ring_idx = rcd->rqID < adapter->num_rx_queues ? 0 : 1; + ring = rq->rx_ring + ring_idx; vmxnet3_getRxDesc(rxd, &rq->rx_ring[ring_idx].base[idx].rxd, &rxCmdDesc); rbi = rq->buf_info[ring_idx] + idx; @@ -1193,37 +1202,80 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, goto rcd_done; } + skip_page_frags = false; ctx->skb = rbi->skb; - rbi->skb = NULL; + new_skb = dev_alloc_skb(rbi->len + NET_IP_ALIGN); + if (new_skb == NULL) { + /* Skb allocation failed, do not handover this + * skb to stack. Reuse it. Drop the existing pkt + */ + rq->stats.rx_buf_alloc_failure++; + ctx->skb = NULL; + rq->stats.drop_total++; + skip_page_frags = true; + goto rcd_done; + } pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len, PCI_DMA_FROMDEVICE); skb_put(ctx->skb, rcd->len); + + /* Immediate refill */ + new_skb->dev = adapter->netdev; + skb_reserve(new_skb, NET_IP_ALIGN); + rbi->skb = new_skb; + rbi->dma_addr = pci_map_single(adapter->pdev, + rbi->skb->data, rbi->len, + PCI_DMA_FROMDEVICE); + rxd->addr = cpu_to_le64(rbi->dma_addr); + rxd->len = rbi->len; + } else { - BUG_ON(ctx->skb == NULL); + BUG_ON(ctx->skb == NULL && !skip_page_frags); + /* non SOP buffer must be type 1 in most cases */ - if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) { - BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY); + BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE); + BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY); - if (rcd->len) { - pci_unmap_page(adapter->pdev, - rbi->dma_addr, rbi->len, - PCI_DMA_FROMDEVICE); + /* If an sop buffer was dropped, skip all + * following non-sop fragments. They will be reused. + */ + if (skip_page_frags) + goto rcd_done; - vmxnet3_append_frag(ctx->skb, rcd, rbi); - rbi->page = NULL; - } - } else { - /* - * The only time a non-SOP buffer is type 0 is - * when it's EOP and error flag is raised, which - * has already been handled. + new_page = alloc_page(GFP_ATOMIC); + if (unlikely(new_page == NULL)) { + /* Replacement page frag could not be allocated. + * Reuse this page. Drop the pkt and free the + * skb which contained this page as a frag. Skip + * processing all the following non-sop frags. */ - BUG_ON(true); + rq->stats.rx_buf_alloc_failure++; + dev_kfree_skb(ctx->skb); + ctx->skb = NULL; + skip_page_frags = true; + goto rcd_done; + } + + if (rcd->len) { + pci_unmap_page(adapter->pdev, + rbi->dma_addr, rbi->len, + PCI_DMA_FROMDEVICE); + + vmxnet3_append_frag(ctx->skb, rcd, rbi); } + + /* Immediate refill */ + rbi->page = new_page; + rbi->dma_addr = pci_map_page(adapter->pdev, rbi->page, + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + rxd->addr = cpu_to_le64(rbi->dma_addr); + rxd->len = rbi->len; } + skb = ctx->skb; if (rcd->eop) { skb->len += skb->data_len; @@ -1244,26 +1296,27 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, } rcd_done: - /* device may skip some rx descs */ - rq->rx_ring[ring_idx].next2comp = idx; - VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp, - rq->rx_ring[ring_idx].size); - - /* refill rx buffers frequently to avoid starving the h/w */ - num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring + - ring_idx); - if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq, - ring_idx, adapter))) { - vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc, - adapter); - - /* if needed, update the register */ - if (unlikely(rq->shared->updateRxProd)) { - VMXNET3_WRITE_BAR0_REG(adapter, - rxprod_reg[ring_idx] + rq->qid * 8, - rq->rx_ring[ring_idx].next2fill); - rq->uncommitted[ring_idx] = 0; - } + /* device may have skipped some rx descs */ + ring->next2comp = idx; + num_to_alloc = vmxnet3_cmd_ring_desc_avail(ring); + ring = rq->rx_ring + ring_idx; + while (num_to_alloc) { + vmxnet3_getRxDesc(rxd, &ring->base[ring->next2fill].rxd, + &rxCmdDesc); + BUG_ON(!rxd->addr); + + /* Recv desc is ready to be used by the device */ + rxd->gen = ring->gen; + vmxnet3_cmd_ring_adv_next2fill(ring); + num_to_alloc--; + } + + /* if needed, update the register */ + if (unlikely(rq->shared->updateRxProd)) { + VMXNET3_WRITE_BAR0_REG(adapter, + rxprod_reg[ring_idx] + rq->qid * 8, + ring->next2fill); + rq->uncommitted[ring_idx] = 0; } vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring); diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index f50d36f..8db7ecf 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -68,10 +68,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.1.9.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.1.14.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01010900 +#define VMXNET3_DRIVER_VERSION_NUM 0x01010E00 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ -- cgit v0.10.2 From b49c78d4827be8d7e67e5b94adac6b30a4a9ad14 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Wed, 6 Jul 2011 10:56:30 +1000 Subject: x86, reboot: Acer Aspire One A110 reboot quirk Since git commit 660e34cebf0a11d54f2d5dd8838607452355f321 x86: reorder reboot method preferences, my Acer Aspire One hangs on reboot. It appears that its ACPI method for rebooting is broken. The attached patch adds a quirk so that the machine will reboot via the BIOS. [ hpa: verified that the ACPI control on this machine is just plain broken. ] Signed-off-by: Peter Chubb Link: http://lkml.kernel.org/r/w439iki5vl.wl%25peter@chubb.wattle.id.au Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 0c016f7..4f0d46f 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -294,6 +294,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"), }, }, + { /* Handle reboot issue on Acer Aspire one */ + .callback = set_bios_reboot, + .ident = "Acer Aspire One A110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), + }, + }, { } }; -- cgit v0.10.2 From 712ae51afd55b20c04c5383d02ba5d10233313b1 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 5 Jul 2011 20:43:12 -0700 Subject: net: vlan: enable soft features regardless of underlying device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If gso/gro feature of underlying device is turned off， then new created vlan device never can turn gso/gro on. Although underlying device don't support TSO, we still should use software segments for vlan device. Signed-off-by: Shan Wei Signed-off-by: David S. Miller diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 7ea5cf9..86bff9b 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -586,9 +586,14 @@ static void vlan_dev_uninit(struct net_device *dev) static u32 vlan_dev_fix_features(struct net_device *dev, u32 features) { struct net_device *real_dev = vlan_dev_info(dev)->real_dev; + u32 old_features = features; features &= real_dev->features; features &= real_dev->vlan_features; + + if (old_features & NETIF_F_SOFT_FEATURES) + features |= old_features & NETIF_F_SOFT_FEATURES; + if (dev_ethtool_get_rx_csum(real_dev)) features |= NETIF_F_RXCSUM; features |= NETIF_F_LLTX; -- cgit v0.10.2 From 58956ba23e2dce83e78cd212cc8305261647684f Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 6 Jul 2011 10:08:27 +0800 Subject: gpio: tps65910: add missing breaks in tps65910_gpio_init Signed-off-by: Axel Lin Signed-off-by: Grant Likely diff --git a/drivers/gpio/tps65910-gpio.c b/drivers/gpio/tps65910-gpio.c index 8d1ddfd..15097ca 100644 --- a/drivers/gpio/tps65910-gpio.c +++ b/drivers/gpio/tps65910-gpio.c @@ -81,8 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) switch(tps65910_chip_id(tps65910)) { case TPS65910: tps65910->gpio.ngpio = 6; + break; case TPS65911: tps65910->gpio.ngpio = 9; + break; default: return; } -- cgit v0.10.2 From 8918034dfb7b0f625ba9eb0329d5750a9573f62e Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 5 Jul 2011 17:13:56 +0900 Subject: ARM: SAMSUNG: Add tx_st_done variable tx_st_done is required for checking the transmission status of SPI channels with different fifo levels Signed-off-by: Padmavathi Venna Acked-by: Jassi Brar Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 82db072..5e6b420 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; struct platform_device s3c64xx_device_spi1 = { diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index e78ee18..ac825e8 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi0_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi1_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; struct platform_device s5p64x0_device_spi1 = { diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c index 57b1979..2b58c9a 100644 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -90,6 +90,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -134,6 +135,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi1 = { @@ -176,6 +178,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi2 = { diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c index e3249a4..eaf9a7b 100644 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = { .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; struct platform_device s5pv210_device_spi1 = { diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index 0ffe34a..4c16fa3 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo { * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number * @high_speed: If the controller supports HIGH_SPEED_EN bit + * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; @@ -53,6 +54,7 @@ struct s3c64xx_spi_info { int fifo_lvl_mask; int rx_lvl_offset; int high_speed; + int tx_st_done; }; /** -- cgit v0.10.2 From 3075741417d47cccc890ed30da9ece666006553a Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Tue, 5 Jul 2011 17:14:02 +0900 Subject: spi/s3c64xx: Bug fix for SPI with different FIFO level The existing macro fails for following scenarios. 1) S5P64X0 channel 1 2) S5PV210 channel 1 The FIFO data level supported in the above SoCs either 64 or 256 bytes depending on the channel. Because of this the TX_DONE is the 25 bit in the status register. The existing macro works for the following scenarios 1) S3C6410 all channels 2) S5PC100 all channels The FIFO data level supported in the above SoCs 64 bytes on all the channels. Because of this the TX_DONE is the 21 bit in the status register. So when we use the existing macro for the non-working SoCs it is not anding with the TX_DONE bit for transmission status check. Signed-off-by: Padmavathi Venna Acked-by: Jassi Brar Acked-by: Grant Likely Signed-off-by: Kukjin Kim diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 795828b..8945e20 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -116,9 +116,7 @@ (((i)->fifo_lvl_mask + 1))) \ ? 1 : 0) -#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \ - (((i)->fifo_lvl_mask + 1) << 1)) \ - ? 1 : 0) +#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & (1 << (i)->tx_st_done)) ? 1 : 0) #define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask) #define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask) -- cgit v0.10.2 From 8fa9dd04b7f7ab1807ebcc274601dd8e2d215569 Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Wed, 6 Jul 2011 15:37:08 +0900 Subject: ARM: S5PC100: Fix for compilation error S5PC100 Compilation fails without this patch Signed-off-by: Padmavathi Venna Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c index 57b1979..cd7ca47 100644 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include -- cgit v0.10.2 From 91a5615203355bb34e0b9e68e94f27f24719a74c Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 5 Jul 2011 20:33:51 +0000 Subject: net: sh_eth: fix cannot work half-duplex mode When link was down, the bit of DM in ECMR was always set. So, we could not use half-duplex mode on the controller. Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 8a72a97..35bbc27 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1184,8 +1184,8 @@ static void sh_eth_adjust_link(struct net_device *ndev) mdp->cd->set_rate(ndev); } if (mdp->link == PHY_DOWN) { - sh_eth_write(ndev, (sh_eth_read(ndev, ECMR) & ~ECMR_TXF) - | ECMR_DM, ECMR); + sh_eth_write(ndev, + (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; mdp->link = phydev->link; } -- cgit v0.10.2 From 2e98e7974de208de0dab9e9969bd47576d07ff10 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 5 Jul 2011 20:33:57 +0000 Subject: net: sh_eth: fix the parameter for the ETHER of SH7757 If the driver didn't set this parameter on the ETHER, the CPU will encounter the "data address error" exception. Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 35bbc27..1f3f7b4 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -140,6 +140,8 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .tpauser = 1, .hw_swap = 1, .no_ade = 1, + .rpadir = 1, + .rpadir_value = 2 << 16, }; #define SH_GIGA_ETH_BASE 0xfee00000 -- cgit v0.10.2 From 5f27275edb7082505eaac1c85a15620207351b63 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 6 Jul 2011 16:04:09 +0900 Subject: ARM: EXYNOS4: Set appropriate I2C device variant Set up a correct I2C bus controller variant name for Exynos4. Without this change the I2C bus driver fails to acquire its clocks. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 9babe44..bfd6214 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -132,6 +133,11 @@ void __init exynos4_map_io(void) s3c_fimc_setname(1, "exynos4-fimc"); s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + + /* The I2C bus controllers are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); } void __init exynos4_init_clocks(int xtal) -- cgit v0.10.2 From 18d85bc558edfa5de7f5b49b6a25fbfdc42628e0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 6 Jul 2011 08:00:29 -0700 Subject: sparc/irqs: Do not trace arch_local_{*,irq_*} functions Do not trace arch_local_save_flags(), arch_local_irq_*() and friends. Although they are marked inline, gcc may still make a function out of them and add it to the pool of functions that are traced by the function tracer. This can cause undesirable results (kernel panic, triple faults, etc). Add the notrace notation to prevent them from ever being traced. Signed-off-by: Steven Rostedt Signed-off-by: David S. Miller diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h index d4d0711..1484890 100644 --- a/arch/sparc/include/asm/irqflags_32.h +++ b/arch/sparc/include/asm/irqflags_32.h @@ -18,7 +18,7 @@ extern void arch_local_irq_restore(unsigned long); extern unsigned long arch_local_irq_save(void); extern void arch_local_irq_enable(void); -static inline unsigned long arch_local_save_flags(void) +static inline notrace unsigned long arch_local_save_flags(void) { unsigned long flags; @@ -26,17 +26,17 @@ static inline unsigned long arch_local_save_flags(void) return flags; } -static inline void arch_local_irq_disable(void) +static inline notrace void arch_local_irq_disable(void) { arch_local_irq_save(); } -static inline bool arch_irqs_disabled_flags(unsigned long flags) +static inline notrace bool arch_irqs_disabled_flags(unsigned long flags) { return (flags & PSR_PIL) != 0; } -static inline bool arch_irqs_disabled(void) +static inline notrace bool arch_irqs_disabled(void) { return arch_irqs_disabled_flags(arch_local_save_flags()); } diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h index aab969c..23cd27f 100644 --- a/arch/sparc/include/asm/irqflags_64.h +++ b/arch/sparc/include/asm/irqflags_64.h @@ -14,7 +14,7 @@ #ifndef __ASSEMBLY__ -static inline unsigned long arch_local_save_flags(void) +static inline notrace unsigned long arch_local_save_flags(void) { unsigned long flags; @@ -26,7 +26,7 @@ static inline unsigned long arch_local_save_flags(void) return flags; } -static inline void arch_local_irq_restore(unsigned long flags) +static inline notrace void arch_local_irq_restore(unsigned long flags) { __asm__ __volatile__( "wrpr %0, %%pil" @@ -36,7 +36,7 @@ static inline void arch_local_irq_restore(unsigned long flags) ); } -static inline void arch_local_irq_disable(void) +static inline notrace void arch_local_irq_disable(void) { __asm__ __volatile__( "wrpr %0, %%pil" @@ -46,7 +46,7 @@ static inline void arch_local_irq_disable(void) ); } -static inline void arch_local_irq_enable(void) +static inline notrace void arch_local_irq_enable(void) { __asm__ __volatile__( "wrpr 0, %%pil" @@ -56,17 +56,17 @@ static inline void arch_local_irq_enable(void) ); } -static inline int arch_irqs_disabled_flags(unsigned long flags) +static inline notrace int arch_irqs_disabled_flags(unsigned long flags) { return (flags > 0); } -static inline int arch_irqs_disabled(void) +static inline notrace int arch_irqs_disabled(void) { return arch_irqs_disabled_flags(arch_local_save_flags()); } -static inline unsigned long arch_local_irq_save(void) +static inline notrace unsigned long arch_local_irq_save(void) { unsigned long flags, tmp; -- cgit v0.10.2 From 6d999da4d2610460fc5f5ce498f1483b40cc6679 Mon Sep 17 00:00:00 2001 From: Matthias Rosenfelder Date: Mon, 13 Jun 2011 07:04:05 +0000 Subject: sparc32,leon: Added __init declaration to leon_flush_needed() The function leon_flush_needed() is called only during bootup from another __init function. Therefore, we can also add __init to leon_flush_needed(). Signed-off-by: Matthias Rosenfelder Acked-by: Daniel Hellstrom Signed-off-by: David S. Miller diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c index c0e0129..e485a68 100644 --- a/arch/sparc/mm/leon_mm.c +++ b/arch/sparc/mm/leon_mm.c @@ -226,7 +226,7 @@ void leon3_getCacheRegs(struct leon3_cacheregs *regs) * Leon2 and Leon3 differ in their way of telling cache information * */ -int leon_flush_needed(void) +int __init leon_flush_needed(void) { int flush_needed = -1; unsigned int ssize, sets; -- cgit v0.10.2 From beb0c9b056b1c23d2029b46a425362e9ccbeba01 Mon Sep 17 00:00:00 2001 From: Paul Parsons Date: Sun, 8 May 2011 01:54:33 +0000 Subject: ARM: pxa: fix PGSR register address calculation The file mfp-pxa2xx.c defines a macro, PGSR(), which translates a gpio bank number to a PGSR register address. The function pxa2xx_mfp_suspend() erroneously passed in a gpio number instead of a gpio bank number. Signed-off-by: Paul Parsons Cc: stable@kernel.org Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 87ae312..b27544b 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void) if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && (GPDR(i) & GPIO_bit(i))) { if (GPLR(i) & GPIO_bit(i)) - PGSR(i) |= GPIO_bit(i); + PGSR(gpio_to_bank(i)) |= GPIO_bit(i); else - PGSR(i) &= ~GPIO_bit(i); + PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i); } } -- cgit v0.10.2 From d204b2c5b16df935fa9a546c528e168859fddcc0 Mon Sep 17 00:00:00 2001 From: Lei Wen Date: Tue, 21 Jun 2011 02:54:18 -0700 Subject: ARM: pxa910: correct nand pmu setting The original pair of <0x01db, 208000000> is invalid. Correct to the valid value. Signed-off-by: Lei Wen Cc: stable@kernel.org Signed-off-by: Eric Miao diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 8f92ccd..1464607 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -110,7 +110,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); -static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(u2o, USB, 0x1b, 480000000); /* device and clock bindings */ -- cgit v0.10.2 From 6662498e132dfa758925a160fd5ef80a083651c3 Mon Sep 17 00:00:00 2001 From: Lei Wen Date: Tue, 21 Jun 2011 05:37:47 -0700 Subject: ARM: pxa168: correct nand pmu setting The original pair of <0x01db, 208000000> is invalid. Correct it to the valid value. The 6th bit of the NFC APMU register indicates NFC works whether at 156Mhz or 78Mhz. So 0x19b indicates NFC works at 156Mhz, and 0x1db indicates it works at 78Mhz. Signed-off-by: Lei Wen Cc: stable@kernel.org Signed-off-by: Eric Miao diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 72b4e76..ab9f999 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -79,7 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APBC_CLK(keypad, PXA168_KPC, 0, 32000); -static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); /* device and clock bindings */ -- cgit v0.10.2 From a51cb91d81f8e6fc4e5e08b772cc3ceb13ac9d37 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 6 Jul 2011 12:33:55 +0200 Subject: fs: fix lock initialization locks_alloc_lock() assumed that the allocated struct file_lock is already initialized to zero members. This is only true for the first allocation of the structure, after reuse some of the members will have random values. This will for example result in passing random fl_start values to userspace in fuse for FL_FLOCK locks, which is an information leak at best. Fix by reinitializing those members which may be non-zero after freeing. Signed-off-by: Miklos Szeredi CC: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/fs/locks.c b/fs/locks.c index 0a4f50d..b286539 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -160,10 +160,28 @@ EXPORT_SYMBOL_GPL(unlock_flocks); static struct kmem_cache *filelock_cache __read_mostly; +static void locks_init_lock_always(struct file_lock *fl) +{ + fl->fl_next = NULL; + fl->fl_fasync = NULL; + fl->fl_owner = NULL; + fl->fl_pid = 0; + fl->fl_nspid = NULL; + fl->fl_file = NULL; + fl->fl_flags = 0; + fl->fl_type = 0; + fl->fl_start = fl->fl_end = 0; +} + /* Allocate an empty lock structure. */ struct file_lock *locks_alloc_lock(void) { - return kmem_cache_alloc(filelock_cache, GFP_KERNEL); + struct file_lock *fl = kmem_cache_alloc(filelock_cache, GFP_KERNEL); + + if (fl) + locks_init_lock_always(fl); + + return fl; } EXPORT_SYMBOL_GPL(locks_alloc_lock); @@ -200,17 +218,9 @@ void locks_init_lock(struct file_lock *fl) INIT_LIST_HEAD(&fl->fl_link); INIT_LIST_HEAD(&fl->fl_block); init_waitqueue_head(&fl->fl_wait); - fl->fl_next = NULL; - fl->fl_fasync = NULL; - fl->fl_owner = NULL; - fl->fl_pid = 0; - fl->fl_nspid = NULL; - fl->fl_file = NULL; - fl->fl_flags = 0; - fl->fl_type = 0; - fl->fl_start = fl->fl_end = 0; fl->fl_ops = NULL; fl->fl_lmops = NULL; + locks_init_lock_always(fl); } EXPORT_SYMBOL(locks_init_lock); -- cgit v0.10.2 From 23c570a67448e803408191f529ed9a83fd34a25a Mon Sep 17 00:00:00 2001 From: Ram Pai Date: Tue, 5 Jul 2011 23:44:30 -0700 Subject: resource: ability to resize an allocated resource Provides the ability to resize a resource that is already allocated. This functionality is put in place to support reallocation needs of pci resources. Signed-off-by: Ram Pai Acked-by: Jesse Barnes Signed-off-by: Linus Torvalds diff --git a/kernel/resource.c b/kernel/resource.c index 798e2fa..3ff4017 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -38,6 +38,14 @@ struct resource iomem_resource = { }; EXPORT_SYMBOL(iomem_resource); +/* constraints to be met while allocating resources */ +struct resource_constraint { + resource_size_t min, max, align; + resource_size_t (*alignf)(void *, const struct resource *, + resource_size_t, resource_size_t); + void *alignf_data; +}; + static DEFINE_RWLOCK(resource_lock); static void *r_next(struct seq_file *m, void *v, loff_t *pos) @@ -384,16 +392,13 @@ static bool resource_contains(struct resource *res1, struct resource *res2) } /* - * Find empty slot in the resource tree given range and alignment. + * Find empty slot in the resource tree with the given range and + * alignment constraints */ -static int find_resource(struct resource *root, struct resource *new, - resource_size_t size, resource_size_t min, - resource_size_t max, resource_size_t align, - resource_size_t (*alignf)(void *, - const struct resource *, - resource_size_t, - resource_size_t), - void *alignf_data) +static int __find_resource(struct resource *root, struct resource *old, + struct resource *new, + resource_size_t size, + struct resource_constraint *constraint) { struct resource *this = root->child; struct resource tmp = *new, avail, alloc; @@ -404,25 +409,26 @@ static int find_resource(struct resource *root, struct resource *new, * Skip past an allocated resource that starts at 0, since the assignment * of this->start - 1 to tmp->end below would cause an underflow. */ - if (this && this->start == 0) { - tmp.start = this->end + 1; + if (this && this->start == root->start) { + tmp.start = (this == old) ? old->start : this->end + 1; this = this->sibling; } for(;;) { if (this) - tmp.end = this->start - 1; + tmp.end = (this == old) ? this->end : this->start - 1; else tmp.end = root->end; - resource_clip(&tmp, min, max); + resource_clip(&tmp, constraint->min, constraint->max); arch_remove_reservations(&tmp); /* Check for overflow after ALIGN() */ avail = *new; - avail.start = ALIGN(tmp.start, align); + avail.start = ALIGN(tmp.start, constraint->align); avail.end = tmp.end; if (avail.start >= tmp.start) { - alloc.start = alignf(alignf_data, &avail, size, align); + alloc.start = constraint->alignf(constraint->alignf_data, &avail, + size, constraint->align); alloc.end = alloc.start + size - 1; if (resource_contains(&avail, &alloc)) { new->start = alloc.start; @@ -432,14 +438,75 @@ static int find_resource(struct resource *root, struct resource *new, } if (!this) break; - tmp.start = this->end + 1; + if (this != old) + tmp.start = this->end + 1; this = this->sibling; } return -EBUSY; } +/* + * Find empty slot in the resource tree given range and alignment. + */ +static int find_resource(struct resource *root, struct resource *new, + resource_size_t size, + struct resource_constraint *constraint) +{ + return __find_resource(root, NULL, new, size, constraint); +} + /** - * allocate_resource - allocate empty slot in the resource tree given range & alignment + * reallocate_resource - allocate a slot in the resource tree given range & alignment. + * The resource will be relocated if the new size cannot be reallocated in the + * current location. + * + * @root: root resource descriptor + * @old: resource descriptor desired by caller + * @newsize: new size of the resource descriptor + * @constraint: the size and alignment constraints to be met. + */ +int reallocate_resource(struct resource *root, struct resource *old, + resource_size_t newsize, + struct resource_constraint *constraint) +{ + int err=0; + struct resource new = *old; + struct resource *conflict; + + write_lock(&resource_lock); + + if ((err = __find_resource(root, old, &new, newsize, constraint))) + goto out; + + if (resource_contains(&new, old)) { + old->start = new.start; + old->end = new.end; + goto out; + } + + if (old->child) { + err = -EBUSY; + goto out; + } + + if (resource_contains(old, &new)) { + old->start = new.start; + old->end = new.end; + } else { + __release_resource(old); + *old = new; + conflict = __request_resource(root, old); + BUG_ON(conflict); + } +out: + write_unlock(&resource_lock); + return err; +} + + +/** + * allocate_resource - allocate empty slot in the resource tree given range & alignment. + * The resource will be reallocated with a new size if it was already allocated * @root: root resource descriptor * @new: resource descriptor desired by caller * @size: requested resource region size @@ -459,12 +526,25 @@ int allocate_resource(struct resource *root, struct resource *new, void *alignf_data) { int err; + struct resource_constraint constraint; if (!alignf) alignf = simple_align_resource; + constraint.min = min; + constraint.max = max; + constraint.align = align; + constraint.alignf = alignf; + constraint.alignf_data = alignf_data; + + if ( new->parent ) { + /* resource is already allocated, try reallocating with + the new constraints */ + return reallocate_resource(root, new, size, &constraint); + } + write_lock(&resource_lock); - err = find_resource(root, new, size, min, max, align, alignf, alignf_data); + err = find_resource(root, new, size, &constraint); if (err >= 0 && __request_resource(root, new)) err = -EBUSY; write_unlock(&resource_lock); -- cgit v0.10.2 From 4d4cf23cdde2f8f9324f5684a7f349e182039529 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 6 Jul 2011 20:15:23 +0200 Subject: PM / Hibernate: Fix free_unnecessary_pages() There is a bug in free_unnecessary_pages() that causes it to attempt to free too many pages in some cases, which triggers the BUG_ON() in memory_bm_clear_bit() for copy_bm. Namely, if count_data_pages() is initially greater than alloc_normal, we get to_free_normal equal to 0 and "save" greater from 0. In that case, if the sum of "save" and count_highmem_pages() is greater than alloc_highmem, we subtract a positive number from to_free_normal. Hence, since to_free_normal was 0 before the subtraction and is an unsigned int, the result is converted to a huge positive number that is used as the number of pages to free. Fix this bug by checking if to_free_normal is actually greater than or equal to the number we're going to subtract from it. Signed-off-by: Rafael J. Wysocki Reported-and-tested-by: Matthew Garrett Cc: stable@kernel.org diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index ace5588..06efa54 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -1211,7 +1211,11 @@ static void free_unnecessary_pages(void) to_free_highmem = alloc_highmem - save; } else { to_free_highmem = 0; - to_free_normal -= save - alloc_highmem; + save -= alloc_highmem; + if (to_free_normal > save) + to_free_normal -= save; + else + to_free_normal = 0; } memory_bm_position_reset(©_bm); -- cgit v0.10.2 From bcb65a797eb7c51e4f227dd19295f14d38738fee Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Wed, 6 Jul 2011 12:26:05 +0100 Subject: FDPIC: Fix memory leak The shdr4extnum variable isn't being freed in the cleanup process of elf_fdpic_core_dump(). Signed-off-by: Davidlohr Bueso Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 63039ed..2bc5dc6 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -1864,6 +1864,7 @@ cleanup: kfree(psinfo); kfree(notes); kfree(fpu); + kfree(shdr4extnum); #ifdef ELF_CORE_COPY_XFPREGS kfree(xfpu); #endif -- cgit v0.10.2 From 2eb5af44b1d22d7f7b715e0b9a4e516eb4451bf9 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 28 Jun 2011 09:53:20 +0100 Subject: ARM: 6979/1: mach-vt8500: add forgotten irq_data conversion This platform has not been converted to 'struct irq_data' when the big pile was done and fails to compile nowadays. Tested on a JayPC-Tablet. Signed-off-by: Wolfram Sang Acked-by: Alexey Charkov Signed-off-by: Russell King diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index 245140c..642de04 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -39,9 +39,10 @@ static void __iomem *ic_regbase; static void __iomem *sic_regbase; -static void vt8500_irq_mask(unsigned int irq) +static void vt8500_irq_mask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 edge; if (irq >= 64) { @@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq) } } -static void vt8500_irq_unmask(unsigned int irq) +static void vt8500_irq_unmask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 dctr; if (irq >= 64) { @@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq) writeb(dctr, base + VT8500_IC_DCTR + irq); } -static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) +static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) { void __iomem *base = ic_regbase; - unsigned int orig_irq = irq; + unsigned irq = d->irq; + unsigned orig_irq = irq; u8 dctr; if (irq >= 64) { @@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) } static struct irq_chip vt8500_irq_chip = { - .name = "vt8500", - .ack = vt8500_irq_mask, - .mask = vt8500_irq_mask, - .unmask = vt8500_irq_unmask, - .set_type = vt8500_irq_set_type, + .name = "vt8500", + .irq_ack = vt8500_irq_mask, + .irq_mask = vt8500_irq_mask, + .irq_unmask = vt8500_irq_unmask, + .irq_set_type = vt8500_irq_set_type, }; void __init vt8500_init_irq(void) -- cgit v0.10.2 From 757df746fc5db0020ddab45914617a19d149c252 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 30 Jun 2011 15:10:21 +0100 Subject: ARM: 6980/1: mmci: use StartBitErr to detect bad connections Stresstesting insert/remove of SD-cards can trigger a StartBitErr. This made the driver to hang in forever waiting for a non ocurring data timeout. This bit and interrupt is documented in the original PL180 TRM, just never implemented until now. Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij Reviewed-by: Jonas Aberg Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7721de9..fe14072 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -582,6 +582,8 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { data->error = -ETIMEDOUT; + } else if (status & MCI_STARTBITERR) { + data->error = -ECOMM; } else if (status & MCI_TXUNDERRUN) { data->error = -EIO; } else if (status & MCI_RXOVERRUN) { diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index bb32e21..2164e8c 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -86,6 +86,7 @@ #define MCI_CMDRESPEND (1 << 6) #define MCI_CMDSENT (1 << 7) #define MCI_DATAEND (1 << 8) +#define MCI_STARTBITERR (1 << 9) #define MCI_DATABLOCKEND (1 << 10) #define MCI_CMDACTIVE (1 << 11) #define MCI_TXACTIVE (1 << 12) @@ -112,6 +113,7 @@ #define MCI_CMDRESPENDCLR (1 << 6) #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) +#define MCI_STARTBITERRCLR (1 << 9) #define MCI_DATABLOCKENDCLR (1 << 10) /* Extended status bits for the ST Micro variants */ #define MCI_ST_SDIOITC (1 << 22) @@ -127,6 +129,7 @@ #define MCI_CMDRESPENDMASK (1 << 6) #define MCI_CMDSENTMASK (1 << 7) #define MCI_DATAENDMASK (1 << 8) +#define MCI_STARTBITERRMASK (1 << 9) #define MCI_DATABLOCKENDMASK (1 << 10) #define MCI_CMDACTIVEMASK (1 << 11) #define MCI_TXACTIVEMASK (1 << 12) @@ -150,7 +153,7 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ #define MCI_IRQ1MASK \ -- cgit v0.10.2 From 186dcaa448c0a7a99933efac2af225fc4fe82c53 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Petr=20=C5=A0tetiar?= Date: Fri, 17 Jun 2011 11:10:04 +0100 Subject: ARM: 6966/1: ep93xx: fix inverted RTS/DTR signals on uart1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It was discovered by Roberto Bergo, that RTS/DTR signals are inverted after the boot, because it was causing him problems with hardware controlled modem connected on ttyAM0. Todd Valentic came with this patch for the issue. Discussion: http://tech.groups.yahoo.com/group/ts-7000/message/20259 Comments from Petr Štetiar: Sorry, but forget to add Acked-by[1]: 1. https://patchwork.kernel.org/patch/873052/ Cc: Ryan Mallon Cc: Hartley Sweeten Signed-off-by: Todd Valentic Tested-by: Roberto Bergo Signed-off-by: Petr Štetiar Acked-by: H Hartley Sweeten Signed-off-by: Russell King diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 1d4b65f..6659a0d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev, unsigned int mcr; mcr = 0; - if (!(mctrl & TIOCM_RTS)) + if (mctrl & TIOCM_RTS) mcr |= 2; - if (!(mctrl & TIOCM_DTR)) + if (mctrl & TIOCM_DTR) mcr |= 1; __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); -- cgit v0.10.2 From 38a8914f9ac2379293944f613e6ca24b61373de8 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 Jul 2011 14:36:19 +0100 Subject: ARM: 6987/1: l2x0: fix disabling function to avoid deadlock The l2x0_disable function attempts to writel with the l2x0_lock held. This results in deadlock when the writel contains an outer_sync call for the platform since the l2x0_lock is already held by the disable function. A further problem is that disabling the L2 without flushing it first can lead to the spin_lock operation becoming visible after the spin_unlock, causing any subsequent L2 maintenance to deadlock. This patch replaces the writel with a call to writel_relaxed in the disabling code and adds a flush before disabling in the control register, preventing livelock from occurring. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index ef59099..44c0867 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -120,17 +120,22 @@ static void l2x0_cache_sync(void) spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_all(void) +static void __l2x0_flush_all(void) { - unsigned long flags; - - /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); debug_writel(0x03); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); cache_sync(); debug_writel(0x00); +} + +static void l2x0_flush_all(void) +{ + unsigned long flags; + + /* clean all ways */ + spin_lock_irqsave(&l2x0_lock, flags); + __l2x0_flush_all(); spin_unlock_irqrestore(&l2x0_lock, flags); } @@ -266,7 +271,9 @@ static void l2x0_disable(void) unsigned long flags; spin_lock_irqsave(&l2x0_lock, flags); - writel(0, l2x0_base + L2X0_CTRL); + __l2x0_flush_all(); + writel_relaxed(0, l2x0_base + L2X0_CTRL); + dsb(); spin_unlock_irqrestore(&l2x0_lock, flags); } -- cgit v0.10.2 From 9715efb8dc9ffa629bf5a1215b11bf2f2f29908b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Jul 2011 08:23:06 +0100 Subject: ARM: 6984/1: enhance TCM robustness The PB11MPCore reports "3" DTCM banks, but anything above 2 is an "undefined" value, so push this to become 0. Further add some checks if code is compiled to TCM even if there is no D/ITCM present in the system, and if we can really fit the compiled code. We don't do the BUG() since it's not helpful, it's better to deal with non-present TCM dynamically. If there is nothing compiled to the TCM and no TCM is detected, it will now just shut up even if TCM support is enabled. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index f5cf660..d402d48 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -134,6 +134,10 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, (tcm_region & 1) ? "" : "not "); } + /* Not much fun you can do with a size 0 bank */ + if (tcm_size == 0) + return 0; + /* Force move the TCM bank to where we want it, enable */ tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1; @@ -165,12 +169,20 @@ void __init tcm_init(void) u32 tcm_status = read_cpuid_tcmstatus(); u8 dtcm_banks = (tcm_status >> 16) & 0x03; u8 itcm_banks = (tcm_status & 0x03); + size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data; + size_t itcm_code_sz = &__eitcm_text - &__sitcm_text; char *start; char *end; char *ram; int ret; int i; + /* Values greater than 2 for D/ITCM banks are "reserved" */ + if (dtcm_banks > 2) + dtcm_banks = 0; + if (itcm_banks > 2) + itcm_banks = 0; + /* Setup DTCM if present */ if (dtcm_banks > 0) { for (i = 0; i < dtcm_banks; i++) { @@ -178,6 +190,13 @@ void __init tcm_init(void) if (ret) return; } + /* This means you compiled more code than fits into DTCM */ + if (dtcm_code_sz > (dtcm_end - DTCM_OFFSET)) { + pr_info("CPU DTCM: %u bytes of code compiled to " + "DTCM but only %lu bytes of DTCM present\n", + dtcm_code_sz, (dtcm_end - DTCM_OFFSET)); + goto no_dtcm; + } dtcm_res.end = dtcm_end - 1; request_resource(&iomem_resource, &dtcm_res); dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET; @@ -186,12 +205,15 @@ void __init tcm_init(void) start = &__sdtcm_data; end = &__edtcm_data; ram = &__dtcm_start; - /* This means you compiled more code than fits into DTCM */ - BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET)); - memcpy(start, ram, (end-start)); - pr_debug("CPU DTCM: copied data from %p - %p\n", start, end); + memcpy(start, ram, dtcm_code_sz); + pr_debug("CPU DTCM: copied data from %p - %p\n", + start, end); + } else if (dtcm_code_sz) { + pr_info("CPU DTCM: %u bytes of code compiled to DTCM but no " + "DTCM banks present in CPU\n", dtcm_code_sz); } +no_dtcm: /* Setup ITCM if present */ if (itcm_banks > 0) { for (i = 0; i < itcm_banks; i++) { @@ -199,6 +221,13 @@ void __init tcm_init(void) if (ret) return; } + /* This means you compiled more code than fits into ITCM */ + if (itcm_code_sz > (itcm_end - ITCM_OFFSET)) { + pr_info("CPU ITCM: %u bytes of code compiled to " + "ITCM but only %lu bytes of ITCM present\n", + itcm_code_sz, (itcm_end - ITCM_OFFSET)); + return; + } itcm_res.end = itcm_end - 1; request_resource(&iomem_resource, &itcm_res); itcm_iomap[0].length = itcm_end - ITCM_OFFSET; @@ -207,10 +236,12 @@ void __init tcm_init(void) start = &__sitcm_text; end = &__eitcm_text; ram = &__itcm_start; - /* This means you compiled more code than fits into ITCM */ - BUG_ON((end - start) > (itcm_end - ITCM_OFFSET)); - memcpy(start, ram, (end-start)); - pr_debug("CPU ITCM: copied code from %p - %p\n", start, end); + memcpy(start, ram, itcm_code_sz); + pr_debug("CPU ITCM: copied code from %p - %p\n", + start, end); + } else if (itcm_code_sz) { + pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no " + "ITCM banks present in CPU\n", itcm_code_sz); } } -- cgit v0.10.2 From 201043f227576d42529ddb340746a060a00f57f6 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Jul 2011 08:23:36 +0100 Subject: ARM: 6985/1: export functions to determine the presence of I/DTCM By allowing code to detect whether DTCM or ITCM is present, code paths involving TCM can be avoided when running on platforms that lack it. This is good for creating single kernels across several archs, if some of them utilize TCM but others don't. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h index 5929ef5..8578d72 100644 --- a/arch/arm/include/asm/tcm.h +++ b/arch/arm/include/asm/tcm.h @@ -27,5 +27,7 @@ void *tcm_alloc(size_t len); void tcm_free(void *addr, size_t len); +bool tcm_dtcm_present(void); +bool tcm_itcm_present(void); #endif diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index d402d48..30e302d 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -19,6 +19,8 @@ #include "tcm.h" static struct gen_pool *tcm_pool; +static bool dtcm_present; +static bool itcm_present; /* TCM section definitions from the linker */ extern char __itcm_start, __sitcm_text, __eitcm_text; @@ -90,6 +92,18 @@ void tcm_free(void *addr, size_t len) } EXPORT_SYMBOL(tcm_free); +bool tcm_dtcm_present(void) +{ + return dtcm_present; +} +EXPORT_SYMBOL(tcm_dtcm_present); + +bool tcm_itcm_present(void) +{ + return itcm_present; +} +EXPORT_SYMBOL(tcm_itcm_present); + static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, u32 *offset) { @@ -208,6 +222,7 @@ void __init tcm_init(void) memcpy(start, ram, dtcm_code_sz); pr_debug("CPU DTCM: copied data from %p - %p\n", start, end); + dtcm_present = true; } else if (dtcm_code_sz) { pr_info("CPU DTCM: %u bytes of code compiled to DTCM but no " "DTCM banks present in CPU\n", dtcm_code_sz); @@ -239,6 +254,7 @@ no_dtcm: memcpy(start, ram, itcm_code_sz); pr_debug("CPU ITCM: copied code from %p - %p\n", start, end); + itcm_present = true; } else if (itcm_code_sz) { pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no " "ITCM banks present in CPU\n", itcm_code_sz); @@ -252,7 +268,6 @@ no_dtcm: */ static int __init setup_tcm_pool(void) { - u32 tcm_status = read_cpuid_tcmstatus(); u32 dtcm_pool_start = (u32) &__edtcm_data; u32 itcm_pool_start = (u32) &__eitcm_text; int ret; @@ -267,7 +282,7 @@ static int __init setup_tcm_pool(void) pr_debug("Setting up TCM memory pool\n"); /* Add the rest of DTCM to the TCM pool */ - if (tcm_status & (0x03 << 16)) { + if (dtcm_present) { if (dtcm_pool_start < dtcm_end) { ret = gen_pool_add(tcm_pool, dtcm_pool_start, dtcm_end - dtcm_pool_start, -1); @@ -284,7 +299,7 @@ static int __init setup_tcm_pool(void) } /* Add the rest of ITCM to the TCM pool */ - if (tcm_status & 0x03) { + if (itcm_present) { if (itcm_pool_start < itcm_end) { ret = gen_pool_add(tcm_pool, itcm_pool_start, itcm_end - itcm_pool_start, -1); -- cgit v0.10.2 From f022e4e41bb339a8bded1063e718d463904ec716 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Jul 2011 08:24:09 +0100 Subject: ARM: 6986/1: mach-realview: add TCM support for PB1176 Enable TCM support on the RealView PB1176 - we have now taken the precautions necessary to support even multi-board builds of RealView systems with TCM enabled. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index b9a9805..dba6d0c 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -50,6 +50,7 @@ config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" select CPU_V6 select ARM_GIC + select HAVE_TCM help Include support for the ARM(R) RealView(R) Platform Baseboard for ARM1176JZF-S. -- cgit v0.10.2 From eca5dc2a0028d64229aef1b7839bcbae1d864c5f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 1 Jul 2011 14:37:08 +0100 Subject: ARM: 6988/1: multi-cpu: remove arguments from CPU proc macros The macros for invoking functions via the processor struct in the MULTI_CPU case define the arguments as part of the macros, making it impossible to take the address of those functions. This patch removes the arguments from the macro definitions so that we can take the address of these functions like we can for the !MULTI_CPU case. Reported-by: Frank Hofmann Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 8ec535e..633d1cb 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -82,13 +82,13 @@ extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); #else -#define cpu_proc_init() processor._proc_init() -#define cpu_proc_fin() processor._proc_fin() -#define cpu_reset(addr) processor.reset(addr) -#define cpu_do_idle() processor._do_idle() -#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) -#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) +#define cpu_proc_init processor._proc_init +#define cpu_proc_fin processor._proc_fin +#define cpu_reset processor.reset +#define cpu_do_idle processor._do_idle +#define cpu_dcache_clean_area processor.dcache_clean_area +#define cpu_set_pte_ext processor.set_pte_ext +#define cpu_do_switch_mm processor.switch_mm #endif extern void cpu_resume(void); -- cgit v0.10.2 From 10cdc7e5129ac26aefece4c7a7d5b1a0285237c2 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 13 Jun 2011 15:28:53 +0100 Subject: ARM: 6960/1: allow enabling SCU code on UP The scu_power_mode function can be used on UP builds as it drives signals to an SOC power controller. So make it selectable for !SMP. Signed-off-by: Rob Herring Signed-off-by: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cd8f520..84fda2b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1349,7 +1349,6 @@ config SMP_ON_UP config HAVE_ARM_SCU bool - depends on SMP help This option enables support for the ARM system coherency unit diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index a1e757c..79ed5e7 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -20,6 +20,7 @@ #define SCU_INVALIDATE 0x0c #define SCU_FPGA_REVISION 0x10 +#ifdef CONFIG_SMP /* * Get the number of CPU cores from the SCU configuration */ @@ -50,6 +51,7 @@ void __init scu_enable(void __iomem *scu_base) */ flush_cache_all(); } +#endif /* * Set the executing CPUs power mode as defined. This will be in -- cgit v0.10.2 From 677d8537d875832019fa989186f084ba47ecd93d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 5 Jul 2011 17:37:37 -0400 Subject: cifs: remove bogus call to cifs_cleanup_volume_info This call to cifs_cleanup_volume_info is clearly wrong. As soon as it's called the following call to cifs_get_tcp_session will oops as the volume_info pointer will then be NULL. The caller of cifs_mount should clean up this data since it passed it in. There's no need for us to call this here. Regression introduced by commit 724d9f1cfba. Reported-by: Adam Williamson Cc: Pavel Shilovsky Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index c8cb83e..545e854 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3012,7 +3012,6 @@ try_mount_again: else if (pSesInfo) cifs_put_smb_ses(pSesInfo); - cifs_cleanup_volume_info(&volume_info); FreeXid(xid); } #endif -- cgit v0.10.2 From b2a0fa152072f0085fa8d8eb0dbf9b3b0c5952fc Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 6 Jul 2011 08:10:36 -0400 Subject: cifs: fix build_unc_path_to_root to account for a prefixpath Regression introduced by commit f87d39d9513. Signed-off-by: Jeff Layton Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 545e854..44376ce 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2855,19 +2855,28 @@ cifs_cleanup_volume_info(struct smb_vol **pvolume_info) /* build_path_to_root returns full path to root when * we do not have an exiting connection (tcon) */ static char * -build_unc_path_to_root(const struct smb_vol *volume_info, +build_unc_path_to_root(const struct smb_vol *vol, const struct cifs_sb_info *cifs_sb) { - char *full_path; + char *full_path, *pos; + unsigned int pplen = vol->prepath ? strlen(vol->prepath) : 0; + unsigned int unc_len = strnlen(vol->UNC, MAX_TREE_SIZE + 1); - int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1); - full_path = kmalloc(unc_len + 1, GFP_KERNEL); + full_path = kmalloc(unc_len + pplen + 1, GFP_KERNEL); if (full_path == NULL) return ERR_PTR(-ENOMEM); - strncpy(full_path, volume_info->UNC, unc_len); - full_path[unc_len] = 0; /* add trailing null */ + strncpy(full_path, vol->UNC, unc_len); + pos = full_path + unc_len; + + if (pplen) { + strncpy(pos, vol->prepath, pplen); + pos += pplen; + } + + *pos = '\0'; /* add trailing null */ convert_delimiter(full_path, CIFS_DIR_SEP(cifs_sb)); + cFYI(1, "%s: full_path=%s", __func__, full_path); return full_path; } -- cgit v0.10.2 From f9e59bcba2cff580a3ccf62e89460f9eed295d89 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 6 Jul 2011 08:10:37 -0400 Subject: cifs: have cifs_cleanup_volume_info not take a double pointer ...as that makes for a cumbersome interface. Make it take a regular smb_vol pointer and rely on the caller to zero it out if needed. Signed-off-by: Jeff Layton Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 35f9154..e11b831 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -713,7 +713,7 @@ cifs_do_mount(struct file_system_type *fs_type, out_super: deactivate_locked_super(sb); out: - cifs_cleanup_volume_info(&volume_info); + cifs_cleanup_volume_info(volume_info); return root; out_mountdata: diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 257f312..53b1b13 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -154,7 +154,7 @@ extern int set_cifs_acl(struct cifs_ntsd *, __u32, struct inode *, extern void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, struct cifs_sb_info *cifs_sb); extern int cifs_match_super(struct super_block *, void *); -extern void cifs_cleanup_volume_info(struct smb_vol **pvolume_info); +extern void cifs_cleanup_volume_info(struct smb_vol *pvolume_info); extern int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, const char *devname); extern int cifs_mount(struct cifs_sb_info *, struct smb_vol *); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 44376ce..dd06407 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2831,14 +2831,11 @@ is_path_accessible(int xid, struct cifs_tcon *tcon, } void -cifs_cleanup_volume_info(struct smb_vol **pvolume_info) +cifs_cleanup_volume_info(struct smb_vol *volume_info) { - struct smb_vol *volume_info; - - if (!pvolume_info || !*pvolume_info) + if (!volume_info) return; - volume_info = *pvolume_info; kfree(volume_info->username); kzfree(volume_info->password); kfree(volume_info->UNC); @@ -2847,7 +2844,6 @@ cifs_cleanup_volume_info(struct smb_vol **pvolume_info) kfree(volume_info->iocharset); kfree(volume_info->prepath); kfree(volume_info); - *pvolume_info = NULL; return; } @@ -2990,7 +2986,7 @@ int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, *pvolume_info = volume_info; return rc; out: - cifs_cleanup_volume_info(&volume_info); + cifs_cleanup_volume_info(volume_info); return rc; } -- cgit v0.10.2 From 0dcb6d737c8d1a31476cbab4d640022b53070ffa Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 6 Jul 2011 11:19:56 -0700 Subject: MAINTAINERS: move kernel-doc patches location Move location of quilt series for kernel-doc patches. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 584bdb2..9820e89 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2197,7 +2197,7 @@ F: drivers/acpi/dock.c DOCUMENTATION M: Randy Dunlap L: linux-doc@vger.kernel.org -T: quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/ +T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/ S: Maintained F: Documentation/ -- cgit v0.10.2 From 316b3799880c55bb20f6d2db904245eccc30e25f Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 6 Jul 2011 11:27:17 -0700 Subject: Documentation: update CodingStyle memory allocators The list of available general purpose memory allocators in Documentation/CodingStyle chapter 14 is incomplete. This patch adds the missing vzalloc() to the list. Signed-off-by: Jesper Juhl Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 58b0bf9..fa6e25b 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -680,8 +680,8 @@ ones already enabled by DEBUG. Chapter 14: Allocating memory The kernel provides the following general purpose memory allocators: -kmalloc(), kzalloc(), kcalloc(), and vmalloc(). Please refer to the API -documentation for further information about them. +kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc(). Please refer to +the API documentation for further information about them. The preferred form for passing a size of a struct is the following: -- cgit v0.10.2 From 9b61fc4cf3a7232ecc39f573a1e68148ef40ea49 Mon Sep 17 00:00:00 2001 From: Andrea Righi Date: Wed, 6 Jul 2011 11:26:26 -0700 Subject: Documentation: fix cgroup blkio throttle filenames All the blkio.throttle.* file names are incorrectly reported without ".throttle" in the documentation. Fix it. Signed-off-by: Andrea Righi Signed-off-by: Randy Dunlap Acked-by: Vivek Goyal Signed-off-by: Linus Torvalds diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt index cd45c8e..84f0a15 100644 --- a/Documentation/cgroups/blkio-controller.txt +++ b/Documentation/cgroups/blkio-controller.txt @@ -77,7 +77,7 @@ Throttling/Upper Limit policy - Specify a bandwidth rate on particular device for root group. The format for policy is ": ". - echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device + echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device Above will put a limit of 1MB/second on reads happening for root group on device having major/minor number 8:16. @@ -90,7 +90,7 @@ Throttling/Upper Limit policy 1024+0 records out 4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s - Limits for writes can be put using blkio.write_bps_device file. + Limits for writes can be put using blkio.throttle.write_bps_device file. Hierarchical Cgroups ==================== @@ -286,28 +286,28 @@ Throttling/Upper limit policy files specified in bytes per second. Rules are per deivce. Following is the format. - echo ": " > /cgrp/blkio.read_bps_device + echo ": " > /cgrp/blkio.throttle.read_bps_device - blkio.throttle.write_bps_device - Specifies upper limit on WRITE rate to the device. IO rate is specified in bytes per second. Rules are per deivce. Following is the format. - echo ": " > /cgrp/blkio.write_bps_device + echo ": " > /cgrp/blkio.throttle.write_bps_device - blkio.throttle.read_iops_device - Specifies upper limit on READ rate from the device. IO rate is specified in IO per second. Rules are per deivce. Following is the format. - echo ": " > /cgrp/blkio.read_iops_device + echo ": " > /cgrp/blkio.throttle.read_iops_device - blkio.throttle.write_iops_device - Specifies upper limit on WRITE rate to the device. IO rate is specified in io per second. Rules are per deivce. Following is the format. - echo ": " > /cgrp/blkio.write_iops_device + echo ": " > /cgrp/blkio.throttle.write_iops_device Note: If both BW and IOPS rules are specified for a device, then IO is subjectd to both the constraints. -- cgit v0.10.2 From 1316d4da3f632d5843d5a446203e73067dc40f09 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 4 Jul 2011 05:27:36 +0000 Subject: xfs: unpin stale inodes directly in IOP_COMMITTED When inodes are marked stale in a transaction, they are treated specially when the inode log item is being inserted into the AIL. It tries to avoid moving the log item forward in the AIL due to a race condition with the writing the underlying buffer back to disk. The was "fixed" in commit de25c18 ("xfs: avoid moving stale inodes in the AIL"). To avoid moving the item forward, we return a LSN smaller than the commit_lsn of the completing transaction, thereby trying to trick the commit code into not moving the inode forward at all. I'm not sure this ever worked as intended - it assumes the inode is already in the AIL, but I don't think the returned LSN would have been small enough to prevent moving the inode. It appears that the reason it worked is that the lower LSN of the inodes meant they were inserted into the AIL and flushed before the inode buffer (which was moved to the commit_lsn of the transaction). The big problem is that with delayed logging, the returning of the different LSN means insertion takes the slow, non-bulk path. Worse yet is that insertion is to a position -before- the commit_lsn so it is doing a AIL traversal on every insertion, and has to walk over all the items that have already been inserted into the AIL. It's expensive. To compound the matter further, with delayed logging inodes are likely to go from clean to stale in a single checkpoint, which means they aren't even in the AIL at all when we come across them at AIL insertion time. Hence these were all getting inserted into the AIL when they simply do not need to be as inodes marked XFS_ISTALE are never written back. Transactional/recovery integrity is maintained in this case by the other items in the unlink transaction that were modified (e.g. the AGI btree blocks) and committed in the same checkpoint. So to fix this, simply unpin the stale inodes directly in xfs_inode_item_committed() and return -1 to indicate that the AIL insertion code does not need to do any further processing of these inodes. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c index 09983a3..b1e88d5 100644 --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -681,15 +681,15 @@ xfs_inode_item_unlock( * where the cluster buffer may be unpinned before the inode is inserted into * the AIL during transaction committed processing. If the buffer is unpinned * before the inode item has been committed and inserted, then it is possible - * for the buffer to be written and IO completions before the inode is inserted + * for the buffer to be written and IO completes before the inode is inserted * into the AIL. In that case, we'd be inserting a clean, stale inode into the * AIL which will never get removed. It will, however, get reclaimed which * triggers an assert in xfs_inode_free() complaining about freein an inode * still in the AIL. * - * To avoid this, return a lower LSN than the one passed in so that the - * transaction committed code will not move the inode forward in the AIL but - * will still unpin it properly. + * To avoid this, just unpin the inode directly and return a LSN of -1 so the + * transaction committed code knows that it does not need to do any further + * processing on the item. */ STATIC xfs_lsn_t xfs_inode_item_committed( @@ -699,8 +699,10 @@ xfs_inode_item_committed( struct xfs_inode_log_item *iip = INODE_ITEM(lip); struct xfs_inode *ip = iip->ili_inode; - if (xfs_iflags_test(ip, XFS_ISTALE)) - return lsn - 1; + if (xfs_iflags_test(ip, XFS_ISTALE)) { + xfs_inode_item_unpin(lip, 0); + return -1; + } return lsn; } diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index 7c7bc2b..c83f63b 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -1361,7 +1361,7 @@ xfs_trans_item_committed( lip->li_flags |= XFS_LI_ABORTED; item_lsn = IOP_COMMITTED(lip, commit_lsn); - /* If the committed routine returns -1, item has been freed. */ + /* item_lsn of -1 means the item needs no further processing */ if (XFS_LSN_CMP(item_lsn, (xfs_lsn_t)-1) == 0) return; @@ -1474,7 +1474,7 @@ xfs_trans_committed_bulk( lip->li_flags |= XFS_LI_ABORTED; item_lsn = IOP_COMMITTED(lip, commit_lsn); - /* item_lsn of -1 means the item was freed */ + /* item_lsn of -1 means the item needs no further processing */ if (XFS_LSN_CMP(item_lsn, (xfs_lsn_t)-1) == 0) continue; -- cgit v0.10.2 From 0942caa373c676dca614ea8352ac77e0270aba73 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 28 Jun 2011 15:10:37 +0000 Subject: btrfs: add missing options displayed in mount output There are three missed mount options settable by user which are not currently displayed in mount output. Signed-off-by: David Sterba Signed-off-by: Chris Mason diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8e948ec..60e13ef 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1336,6 +1336,11 @@ struct btrfs_ioctl_defrag_range_args { */ #define BTRFS_STRING_ITEM_KEY 253 +/* + * Flags for mount options. + * + * Note: don't forget to add new options to btrfs_show_options() + */ #define BTRFS_MOUNT_NODATASUM (1 << 0) #define BTRFS_MOUNT_NODATACOW (1 << 1) #define BTRFS_MOUNT_NOBARRIER (1 << 2) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 3559d0b..5746081 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -721,6 +721,12 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",clear_cache"); if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED)) seq_puts(seq, ",user_subvol_rm_allowed"); + if (btrfs_test_opt(root, ENOSPC_DEBUG)) + seq_puts(seq, ",enospc_debug"); + if (btrfs_test_opt(root, AUTO_DEFRAG)) + seq_puts(seq, ",autodefrag"); + if (btrfs_test_opt(root, INODE_MAP_CACHE)) + seq_puts(seq, ",inode_cache"); return 0; } -- cgit v0.10.2 From 508794eb5ec2a2b832742e78c6766844b10c0c94 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Sat, 2 Jul 2011 21:24:41 +0000 Subject: Btrfs: don't panic if we get an error while balancing V2 A user reported an error where if we try to balance an fs after a device has been removed it will blow up. This is because we get an EIO back and this is where BUG_ON(ret) bites us in the ass. To fix we just exit. Thanks, Reported-by: Anand Jain Signed-off-by: Josef Bacik Signed-off-by: Chris Mason diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 1efa56e..19450bc 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2098,7 +2098,8 @@ int btrfs_balance(struct btrfs_root *dev_root) chunk_root->root_key.objectid, found_key.objectid, found_key.offset); - BUG_ON(ret && ret != -ENOSPC); + if (ret && ret != -ENOSPC) + goto error; key.offset = found_key.offset - 1; } ret = 0; -- cgit v0.10.2 From 149e2d76b4886c4c7ff5e077646a8ba3563c8026 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 6 Jul 2011 18:51:53 -0400 Subject: btrfs: fix oops when doing space balance We need to make sure the data relocation inode doesn't go through the delayed metadata updates, otherwise we get an oops during balance: kernel BUG at fs/btrfs/relocation.c:4303! [SNIP] Call Trace: [] ? update_ref_for_cow+0x22d/0x330 [btrfs] [] __btrfs_cow_block+0x451/0x5e0 [btrfs] [] ? read_block_for_search+0x14d/0x4d0 [btrfs] [] btrfs_cow_block+0x10b/0x240 [btrfs] [] btrfs_search_slot+0x49e/0x7a0 [btrfs] [] btrfs_lookup_inode+0x2f/0xa0 [btrfs] [] ? mutex_lock+0x1e/0x50 [] btrfs_update_delayed_inode+0x71/0x160 [btrfs] [] ? __btrfs_release_delayed_node+0x67/0x190 [btrfs] [] btrfs_run_delayed_items+0xe8/0x120 [btrfs] [] btrfs_commit_transaction+0x250/0x850 [btrfs] [] ? find_get_pages+0x39/0x130 [] ? join_transaction+0x25/0x250 [btrfs] [] ? wake_up_bit+0x40/0x40 [] prepare_to_relocate+0xda/0xf0 [btrfs] [] relocate_block_group+0x4b/0x620 [btrfs] [] ? btrfs_clean_old_snapshots+0x35/0x150 [btrfs] [] btrfs_relocate_block_group+0x1b3/0x2e0 [btrfs] [] ? btrfs_tree_unlock+0x50/0x50 [btrfs] [] btrfs_relocate_chunk+0x8b/0x670 [btrfs] [] ? btrfs_set_path_blocking+0x3d/0x50 [btrfs] [] ? read_extent_buffer+0xd8/0x1d0 [btrfs] [] ? btrfs_previous_item+0xb1/0x150 [btrfs] [] ? read_extent_buffer+0xd8/0x1d0 [btrfs] [] btrfs_balance+0x21a/0x2b0 [btrfs] [] btrfs_ioctl+0x798/0xd20 [btrfs] [] ? handle_mm_fault+0x148/0x270 [] ? do_page_fault+0x1d8/0x4b0 [] do_vfs_ioctl+0x9a/0x540 [] sys_ioctl+0xa1/0xb0 [] system_call_fastpath+0x16/0x1b [SNIP] RIP [] btrfs_reloc_cow_block+0x22c/0x270 [btrfs] Signed-off-by: Miao Xie Signed-off-by: Chris Mason diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 447612d..4a13730 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2678,12 +2678,14 @@ noinline int btrfs_update_inode(struct btrfs_trans_handle *trans, int ret; /* - * If root is tree root, it means this inode is used to - * store free space information. And these inodes are updated - * when committing the transaction, so they needn't delaye to - * be updated, or deadlock will occured. + * If the inode is a free space inode, we can deadlock during commit + * if we put it into the delayed code. + * + * The data relocation inode should also be directly updated + * without delay */ - if (!is_free_space_inode(root, inode)) { + if (!is_free_space_inode(root, inode) + && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) { ret = btrfs_delayed_update_inode(trans, root, inode); if (!ret) btrfs_set_inode_last_trans(trans, inode); -- cgit v0.10.2 From 7a3136666bc0f0419f7aaa7b1fabb4b0e0a7fb76 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 6 Jul 2011 18:10:34 -0700 Subject: x86, suspend: Restore MISC_ENABLE MSR in realmode wakeup Some BIOSes will reset the Intel MISC_ENABLE MSR (specifically the XD_DISABLE bit) when resuming from S3, which can interact poorly with ebba638ae723d8a8fc2f7abce5ec18b688b791d7. In 32bit PAE mode, this can lead to a fault when EFER is restored by the kernel wakeup routines, due to it setting the NX bit for a CPU that (thanks to the BIOS reset) now incorrectly thinks it lacks the NX feature. (64bit is not affected because it uses a common CPU bring-up that specifically handles the XD_DISABLE bit.) The need for MISC_ENABLE being restored so early is specific to the S3 resume path. Normally, MISC_ENABLE is saved in save_processor_state(), but this happens after the resume header is created, so just reproduce the logic here. (acpi_suspend_lowlevel() creates the header, calls do_suspend_lowlevel, which calls save_processor_state(), so the saved processor context isn't available during resume header creation.) [ hpa: Consider for stable if OK in mainline ] Signed-off-by: Kees Cook Link: http://lkml.kernel.org/r/20110707011034.GA8523@outflux.net Signed-off-by: H. Peter Anvin Cc: Rafael J. Wysocki Cc: 2.6.38+ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index ead21b6..b4fd836 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -28,6 +28,8 @@ pmode_cr3: .long 0 /* Saved %cr3 */ pmode_cr4: .long 0 /* Saved %cr4 */ pmode_efer: .quad 0 /* Saved EFER */ pmode_gdt: .quad 0 +pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ +pmode_behavior: .long 0 /* Wakeup behavior flags */ realmode_flags: .long 0 real_magic: .long 0 trampoline_segment: .word 0 @@ -91,6 +93,18 @@ wakeup_code: /* Call the C code */ calll main + /* Restore MISC_ENABLE before entering protected mode, in case + BIOS decided to clear XD_DISABLE during S3. */ + movl pmode_behavior, %eax + btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax + jnc 1f + + movl pmode_misc_en, %eax + movl pmode_misc_en + 4, %edx + movl $MSR_IA32_MISC_ENABLE, %ecx + wrmsr +1: + /* Do any other stuff... */ #ifndef CONFIG_64BIT diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index e1828c0..97a29e1 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -21,6 +21,9 @@ struct wakeup_header { u32 pmode_efer_low; /* Protected mode EFER */ u32 pmode_efer_high; u64 pmode_gdt; + u32 pmode_misc_en_low; /* Protected mode MISC_ENABLE */ + u32 pmode_misc_en_high; + u32 pmode_behavior; /* Wakeup routine behavior flags */ u32 realmode_flags; u32 real_magic; u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ @@ -39,4 +42,7 @@ extern struct wakeup_header wakeup_header; #define WAKEUP_HEADER_SIGNATURE 0x51ee1111 #define WAKEUP_END_SIGNATURE 0x65a22c82 +/* Wakeup behavior bits */ +#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE 0 + #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 18a857b..103b6ab 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -77,6 +77,12 @@ int acpi_suspend_lowlevel(void) header->pmode_cr0 = read_cr0(); header->pmode_cr4 = read_cr4_safe(); + header->pmode_behavior = 0; + if (!rdmsr_safe(MSR_IA32_MISC_ENABLE, + &header->pmode_misc_en_low, + &header->pmode_misc_en_high)) + header->pmode_behavior |= + (1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE); header->realmode_flags = acpi_realmode_flags; header->real_magic = 0x12345678; -- cgit v0.10.2 From eebb02b1f03b3722d678bfcb560f3b26661ab0d2 Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Thu, 7 Jul 2011 00:25:52 -0700 Subject: vmxnet3: round down # of queues to power of two vmxnet3 device supports only power-of-two number of queues. The driver therefore needs to check this and rounds down the number of queues to the nearest power of two. Signed-off-by: Yong Wang Signed-off-by: Shreyas N Bhatewara Reviewed-by: Dmitry Torokhov diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 45a23b2..6740235 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2947,6 +2947,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, else #endif num_rx_queues = 1; + num_rx_queues = rounddown_pow_of_two(num_rx_queues); if (enable_mq) num_tx_queues = min(VMXNET3_DEVICE_MAX_TX_QUEUES, @@ -2954,6 +2955,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, else num_tx_queues = 1; + num_tx_queues = rounddown_pow_of_two(num_tx_queues); netdev = alloc_etherdev_mq(sizeof(struct vmxnet3_adapter), max(num_tx_queues, num_rx_queues)); printk(KERN_INFO "# of Tx queues : %d, # of Rx queues : %d\n", @@ -3138,6 +3140,7 @@ vmxnet3_remove_device(struct pci_dev *pdev) else #endif num_rx_queues = 1; + num_rx_queues = rounddown_pow_of_two(num_rx_queues); cancel_work_sync(&adapter->work); diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 8db7ecf..e08d75e 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -55,6 +55,7 @@ #include #include #include +#include #include "vmxnet3_defs.h" @@ -68,10 +69,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.1.14.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.1.18.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01010E00 +#define VMXNET3_DRIVER_VERSION_NUM 0x01011200 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ -- cgit v0.10.2 From 9c7a083d94656ad6d6f2e03ba90194f2cc5bced5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 7 Jul 2011 09:25:54 +0200 Subject: ALSA: hda - Change all ADCs for dual-adc switching mode for Realtek When the dual-adc switching mode is active in Realtek auto-parser, we need to couple all ADCs as a single capture-volume. Currently, the volume control changes only the first ADC, thus others may remain silent. This patch fixes the problem. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d21191d..7d49271 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2715,17 +2715,30 @@ typedef int (*getput_call_t)(struct snd_kcontrol *kcontrol, static int alc_cap_getput_caller(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol, - getput_call_t func) + getput_call_t func, bool check_adc_switch) { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; - unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); - int err; + int i, err; mutex_lock(&codec->control_mutex); - kcontrol->private_value = HDA_COMPOSE_AMP_VAL(spec->adc_nids[adc_idx], - 3, 0, HDA_INPUT); - err = func(kcontrol, ucontrol); + if (check_adc_switch && spec->dual_adc_switch) { + for (i = 0; i < spec->num_adc_nids; i++) { + kcontrol->private_value = + HDA_COMPOSE_AMP_VAL(spec->adc_nids[i], + 3, 0, HDA_INPUT); + err = func(kcontrol, ucontrol); + if (err < 0) + goto error; + } + } else { + i = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); + kcontrol->private_value = + HDA_COMPOSE_AMP_VAL(spec->adc_nids[i], + 3, 0, HDA_INPUT); + err = func(kcontrol, ucontrol); + } + error: mutex_unlock(&codec->control_mutex); return err; } @@ -2734,14 +2747,14 @@ static int alc_cap_vol_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { return alc_cap_getput_caller(kcontrol, ucontrol, - snd_hda_mixer_amp_volume_get); + snd_hda_mixer_amp_volume_get, false); } static int alc_cap_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { return alc_cap_getput_caller(kcontrol, ucontrol, - snd_hda_mixer_amp_volume_put); + snd_hda_mixer_amp_volume_put, true); } /* capture mixer elements */ @@ -2751,14 +2764,14 @@ static int alc_cap_sw_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { return alc_cap_getput_caller(kcontrol, ucontrol, - snd_hda_mixer_amp_switch_get); + snd_hda_mixer_amp_switch_get, false); } static int alc_cap_sw_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { return alc_cap_getput_caller(kcontrol, ucontrol, - snd_hda_mixer_amp_switch_put); + snd_hda_mixer_amp_switch_put, true); } #define _DEFINE_CAPMIX(num) \ -- cgit v0.10.2 From f03d78db65085609938fdb686238867e65003181 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 7 Jul 2011 00:27:05 -0700 Subject: net: refine {udp|tcp|sctp}_mem limits Current tcp/udp/sctp global memory limits are not taking into account hugepages allocations, and allow 50% of ram to be used by buffers of a single protocol [ not counting space used by sockets / inodes ...] Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram per protocol, and a minimum of 128 pages. Heavy duty machines sysadmins probably need to tweak limits anyway. References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032 Reported-by: starlight Suggested-by: Andrew Morton Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 054a59d..46febca 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3220,7 +3220,7 @@ __setup("thash_entries=", set_thash_entries); void __init tcp_init(void) { struct sk_buff *skb = NULL; - unsigned long nr_pages, limit; + unsigned long limit; int i, max_share, cnt; unsigned long jiffy = jiffies; @@ -3277,13 +3277,7 @@ void __init tcp_init(void) sysctl_tcp_max_orphans = cnt / 2; sysctl_max_syn_backlog = max(128, cnt / 256); - /* Set the pressure threshold to be a fraction of global memory that - * is up to 1/2 at 256 MB, decreasing toward zero with the amount of - * memory, with a floor of 128 pages. - */ - nr_pages = totalram_pages - totalhigh_pages; - limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT); - limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11); + limit = nr_free_buffer_pages() / 8; limit = max(limit, 128UL); sysctl_tcp_mem[0] = limit / 4 * 3; sysctl_tcp_mem[1] = limit; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 48cd88e..198f75b 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2209,16 +2209,10 @@ void __init udp_table_init(struct udp_table *table, const char *name) void __init udp_init(void) { - unsigned long nr_pages, limit; + unsigned long limit; udp_table_init(&udp_table, "UDP"); - /* Set the pressure threshold up by the same strategy of TCP. It is a - * fraction of global memory that is up to 1/2 at 256 MB, decreasing - * toward zero with the amount of memory, with a floor of 128 pages. - */ - nr_pages = totalram_pages - totalhigh_pages; - limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT); - limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11); + limit = nr_free_buffer_pages() / 8; limit = max(limit, 128UL); sysctl_udp_mem[0] = limit / 4 * 3; sysctl_udp_mem[1] = limit; diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 67380a2..207175b 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -1058,7 +1058,6 @@ SCTP_STATIC __init int sctp_init(void) int status = -EINVAL; unsigned long goal; unsigned long limit; - unsigned long nr_pages; int max_share; int order; @@ -1148,15 +1147,7 @@ SCTP_STATIC __init int sctp_init(void) /* Initialize handle used for association ids. */ idr_init(&sctp_assocs_id); - /* Set the pressure threshold to be a fraction of global memory that - * is up to 1/2 at 256 MB, decreasing toward zero with the amount of - * memory, with a floor of 128 pages. - * Note this initializes the data in sctpv6_prot too - * Unabashedly stolen from tcp_init - */ - nr_pages = totalram_pages - totalhigh_pages; - limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT); - limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11); + limit = nr_free_buffer_pages() / 8; limit = max(limit, 128UL); sysctl_sctp_mem[0] = limit / 4 * 3; sysctl_sctp_mem[1] = limit; -- cgit v0.10.2 From fcb857abc4c0d512e99a08ba0415be9a6d65b4c0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 6 Jul 2011 19:52:27 +0000 Subject: drm/radeon/kms: fix typo in IH_CNTL swap bitfield Only affects BE systems. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 1636e34..5fd287a 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -466,7 +466,7 @@ #define IH_RB_WPTR_ADDR_LO 0x3e14 #define IH_CNTL 0x3e18 # define ENABLE_INTR (1 << 0) -# define IH_MC_SWAP(x) ((x) << 2) +# define IH_MC_SWAP(x) ((x) << 1) # define IH_MC_SWAP_NONE 0 # define IH_MC_SWAP_16BIT 1 # define IH_MC_SWAP_32BIT 2 diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index f140a0d..0245ae6 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -536,7 +536,7 @@ #define IH_RB_WPTR_ADDR_LO 0x3e14 #define IH_CNTL 0x3e18 # define ENABLE_INTR (1 << 0) -# define IH_MC_SWAP(x) ((x) << 2) +# define IH_MC_SWAP(x) ((x) << 1) # define IH_MC_SWAP_NONE 0 # define IH_MC_SWAP_16BIT 1 # define IH_MC_SWAP_32BIT 2 -- cgit v0.10.2 From 37cba6c6f4687e694ac6e3adcf2c2b2974aa3aae Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 6 Jul 2011 19:37:47 +0000 Subject: drm/radeon/kms: fix typo in evergreen disp int status register Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 5fd287a..b7b2714 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -547,7 +547,7 @@ # define LB_D5_VBLANK_INTERRUPT (1 << 3) # define DC_HPD5_INTERRUPT (1 << 17) # define DC_HPD5_RX_INTERRUPT (1 << 18) -#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6050 +#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6150 # define LB_D6_VLINE_INTERRUPT (1 << 2) # define LB_D6_VBLANK_INTERRUPT (1 << 3) # define DC_HPD6_INTERRUPT (1 << 17) -- cgit v0.10.2 From ccd6895d401efad0c0e41d0e93fba4ef3085e268 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 6 Jul 2011 18:30:09 +0000 Subject: drm/radeon/kms: free ib pool on module unloading ib pool weren't free for various newer asic on module unload. This doesn't cause much arm but still could be candidate for stable. Signed-off-by: Jerome Glisse cc: stable@kernel.org Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index e8a5ffb..a2d9008 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3237,6 +3237,7 @@ void evergreen_fini(struct radeon_device *rdev) r700_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); evergreen_pcie_gart_fini(rdev); radeon_gem_fini(rdev); diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 16caafe..559dbd4 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1581,6 +1581,7 @@ void cayman_fini(struct radeon_device *rdev) cayman_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); cayman_pcie_gart_fini(rdev); radeon_gem_fini(rdev); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index f79d2cc..bc54b26 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2628,6 +2628,7 @@ void r600_fini(struct radeon_device *rdev) r600_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); r600_pcie_gart_fini(rdev); radeon_agp_fini(rdev); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 8bb347d..4de5189 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1368,6 +1368,7 @@ void rv770_fini(struct radeon_device *rdev) r700_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); rv770_pcie_gart_fini(rdev); rv770_vram_scratch_fini(rdev); -- cgit v0.10.2 From d61a06862ba8c14466e1dd718cac460da0465ddd Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 4 Jul 2011 03:16:17 +0000 Subject: drm/kms: allow drm_mode_group with no objects Sometimes we could be controlling a device (such as an NVIDIA Tesla) that has no crtcs/encoders/connectors. One could argue that the driver should unset DRIVER_MODESET in this case, but that changes a whole heap of the DRM's other behaviours, and it's much easier to just be a modesetting driver without any outputs. Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 21058e6..82db185 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -886,9 +886,6 @@ int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group) total_objects += dev->mode_config.num_connector; total_objects += dev->mode_config.num_encoder; - if (total_objects == 0) - return -EINVAL; - group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL); if (!group->id_list) return -ENOMEM; -- cgit v0.10.2 From f70e957cda22d309c769805cbb932407a5232219 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 6 Jul 2011 16:52:37 -0400 Subject: x86: Don't use the EFI reboot method by default Testing suggests that at least some Lenovos and some Intels will fail to reboot via EFI, attempting to jump to an unmapped physical address. In the long run we could handle this by providing a page table with a 1:1 mapping of physical addresses, but for now it's probably just easier to assume that ACPI or legacy methods will be present and reboot via those. Signed-off-by: Matthew Garrett Cc: Linus Torvalds Cc: Andrew Morton Cc: Alan Cox Link: http://lkml.kernel.org/r/1309985557-15350-1-git-send-email-mjg@redhat.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 474356b..899e393 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -504,9 +504,6 @@ void __init efi_init(void) x86_platform.set_wallclock = efi_set_rtc_mmss; #endif - /* Setup for EFI runtime service */ - reboot_type = BOOT_EFI; - #if EFI_DEBUG print_efi_memmap(); #endif -- cgit v0.10.2 From 949123016a2ef578009b6aa3e98d45d1a154ebfb Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 2 Jul 2011 09:28:04 +0000 Subject: sctp: fix missing send up SCTP_SENDER_DRY_EVENT when subscribe it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We forgot to send up SCTP_SENDER_DRY_EVENT notification when user app subscribes to this event, and there is no data to be sent or retransmit. This is required by the Socket API and used by the DTLS/SCTP implementation. Reported-by: Michael Tüxen Signed-off-by: Wei Yongjun Tested-by: Robin Seggelmann Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 6766913..08c6238 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2073,10 +2073,33 @@ static int sctp_setsockopt_disable_fragments(struct sock *sk, static int sctp_setsockopt_events(struct sock *sk, char __user *optval, unsigned int optlen) { + struct sctp_association *asoc; + struct sctp_ulpevent *event; + if (optlen > sizeof(struct sctp_event_subscribe)) return -EINVAL; if (copy_from_user(&sctp_sk(sk)->subscribe, optval, optlen)) return -EFAULT; + + /* + * At the time when a user app subscribes to SCTP_SENDER_DRY_EVENT, + * if there is no data to be sent or retransmit, the stack will + * immediately send up this notification. + */ + if (sctp_ulpevent_type_enabled(SCTP_SENDER_DRY_EVENT, + &sctp_sk(sk)->subscribe)) { + asoc = sctp_id2assoc(sk, 0); + + if (asoc && sctp_outq_is_empty(&asoc->outqueue)) { + event = sctp_ulpevent_make_sender_dry_event(asoc, + GFP_ATOMIC); + if (!event) + return -ENOMEM; + + sctp_ulpq_tail_event(&asoc->ulpq, event); + } + } + return 0; } -- cgit v0.10.2 From 7fa22bd5460bb2021729fa5a1012c60b9b3a56e2 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 7 Jul 2011 01:56:51 +0100 Subject: ARM: 6993/1: platsmp: Allow secondary cpu hotplug with maxcpus=1 If an ARM system has multiple cpus in the same socket and the kernel is booted with maxcpus=1, secondary cpus are possible but not present due to how platform_smp_prepare_cpus() is called. Since most typical ARM processors don't actually support physical hotplug, initialize the present map to be equal to the possible map in generic ARM SMP code. Also, always call platform_smp_prepare_cpus() as long as max_cpus is non-zero (0 means no SMP) to allow platform code to do any SMP setup. After applying this patch it's possible to boot an ARM system with maxcpus=1 on the command line and then hotplug in secondary cpus via sysfs. This is more in line with how x86 does things. Signed-off-by: Stephen Boyd Cc: Paul Mundt Cc: Kukjin Kim Cc: David Brown Cc: Tony Lindgren Cc: Srinidhi Kasagar Cc: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 344e52b..0ffcf5c 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -361,8 +361,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) */ if (max_cpus > ncores) max_cpus = ncores; - - if (max_cpus > 1) { + if (ncores > 1 && max_cpus) { /* * Enable the local timer or broadcast device for the * boot CPU, but only if we have more than one CPU. @@ -370,6 +369,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus) percpu_timer_setup(); /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. A platform should + * re-initialize the map in platform_smp_prepare_cpus() if + * present != possible (e.g. physical hotplug). + */ + init_cpu_present(&cpu_possible_map); + + /* * Initialise the SCU if there are more than one CPU * and let them know where to start. */ diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index c5e65a0..b68d5bd 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -154,14 +154,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 2034098..315b9f3 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -157,12 +157,4 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); } diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index ecfe93c..ce65e93 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -125,14 +125,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); /* * Initialise the SCU and wake up the secondary core using diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 963bf0d..4ae943b 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -68,14 +68,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index f3888fe..66f9806 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -64,10 +64,5 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - shmobile_smp_prepare_cpus(); } diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index b8ae3c9..1a594dc 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -129,14 +129,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base); } diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 0c527fe..a33df5f 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -172,14 +172,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); wakeup_secondary(); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 765a71f..bfd32f5 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -229,10 +229,6 @@ static void ct_ca9x4_init_cpu_map(void) static void ct_ca9x4_smp_enable(unsigned int max_cpus) { - int i; - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - scu_enable(MMIO_P2V(A9_MPCORE_SCU)); } #endif -- cgit v0.10.2 From 90c5ffe592ff3b33afe2bdfe5e9ec630fc599e32 Mon Sep 17 00:00:00 2001 From: Vitaly Kuzmichev Date: Thu, 7 Jul 2011 14:56:05 +0100 Subject: ARM: 6994/1: smp_twd: Fix typo in 'twd_timer_rate' printing To get hundredths of MHz the rate needs to be divided by 10'000. Here is an example: twd_timer_rate = 123456789 Before the patch: twd_timer_rate / 1000000 = 123 (twd_timer_rate / 1000000) % 100 = 23 Result: 123.23MHz. After being fixed: twd_timer_rate / 1000000 = 123 (twd_timer_rate / 10000) % 100 = 45 Result: 123.45MHz. Signed-off-by: Vitaly Kuzmichev Signed-off-by: Russell King diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 60636f4..2c277d4 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void) twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, - (twd_timer_rate / 1000000) % 100); + (twd_timer_rate / 10000) % 100); } } -- cgit v0.10.2 From d30e1521b2afb5e6f21ca8bc1a4b6ec2afc93597 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 6 Jul 2011 21:07:07 +0200 Subject: arm: mach-vt8500: add forgotten irq_data conversion This platform has not been converted to 'struct irq_data' when the big pile was done. It fails to compile nowadays, because the compatibility code has gone. CC arch/arm/mach-vt8500/irq.o arch/arm/mach-vt8500/irq.c:118:2: error: unknown field 'ack' specified in initializer arch/arm/mach-vt8500/irq.c:118:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:119:2: error: unknown field 'mask' specified in initializer arch/arm/mach-vt8500/irq.c:119:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:120:2: error: unknown field 'unmask' specified in initializer arch/arm/mach-vt8500/irq.c:120:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:121:2: error: unknown field 'set_type' specified in initializer arch/arm/mach-vt8500/irq.c:121:2: warning: initialization from incompatible pointer type make[1]: *** [arch/arm/mach-vt8500/irq.o] Error 1 Add the missing conversion. Tested on a JayPC-Tablet. Signed-off-by: Wolfram Sang Acked-by: Alexey Charkov Cc: Russell King Cc: Thomas Gleixner Cc: Andrew Morton Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index 245140c..642de04 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -39,9 +39,10 @@ static void __iomem *ic_regbase; static void __iomem *sic_regbase; -static void vt8500_irq_mask(unsigned int irq) +static void vt8500_irq_mask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 edge; if (irq >= 64) { @@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq) } } -static void vt8500_irq_unmask(unsigned int irq) +static void vt8500_irq_unmask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 dctr; if (irq >= 64) { @@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq) writeb(dctr, base + VT8500_IC_DCTR + irq); } -static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) +static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) { void __iomem *base = ic_regbase; - unsigned int orig_irq = irq; + unsigned irq = d->irq; + unsigned orig_irq = irq; u8 dctr; if (irq >= 64) { @@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) } static struct irq_chip vt8500_irq_chip = { - .name = "vt8500", - .ack = vt8500_irq_mask, - .mask = vt8500_irq_mask, - .unmask = vt8500_irq_unmask, - .set_type = vt8500_irq_set_type, + .name = "vt8500", + .irq_ack = vt8500_irq_mask, + .irq_mask = vt8500_irq_mask, + .irq_unmask = vt8500_irq_unmask, + .irq_set_type = vt8500_irq_set_type, }; void __init vt8500_init_irq(void) -- cgit v0.10.2 From 92530664bbe5a13aede4a8763459bbe560ad9221 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Tue, 21 Jun 2011 12:00:33 -0500 Subject: acer-wmi: Only update rfkill status for associated hotkey events acer-wmi is indiscriminately using the device state from hotkey events to update the various rfkill states. On the Aspire 1830 this can result in a soft block on the wlan when the touchpad hotkey is pressed, as it is reporting a non-zero device state that does not reflect the wireless status. To fix this, only update rfkill states when a wlan or bluetooth hotkey is pressed. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 005417b..942798c 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -1445,6 +1445,8 @@ static void acer_wmi_notify(u32 value, void *context) union acpi_object *obj; struct event_return_value return_value; acpi_status status; + u16 device_state; + const struct key_entry *key; status = wmi_get_event_data(value, &response); if (status != AE_OK) { @@ -1472,23 +1474,32 @@ static void acer_wmi_notify(u32 value, void *context) switch (return_value.function) { case WMID_HOTKEY_EVENT: - if (return_value.device_state) { - u16 device_state = return_value.device_state; - pr_debug("device state: 0x%x\n", device_state); - if (has_cap(ACER_CAP_WIRELESS)) - rfkill_set_sw_state(wireless_rfkill, - !(device_state & ACER_WMID3_GDS_WIRELESS)); - if (has_cap(ACER_CAP_BLUETOOTH)) - rfkill_set_sw_state(bluetooth_rfkill, - !(device_state & ACER_WMID3_GDS_BLUETOOTH)); - if (has_cap(ACER_CAP_THREEG)) - rfkill_set_sw_state(threeg_rfkill, - !(device_state & ACER_WMID3_GDS_THREEG)); - } - if (!sparse_keymap_report_event(acer_wmi_input_dev, - return_value.key_num, 1, true)) + device_state = return_value.device_state; + pr_debug("device state: 0x%x\n", device_state); + + key = sparse_keymap_entry_from_scancode(acer_wmi_input_dev, + return_value.key_num); + if (!key) { pr_warn("Unknown key number - 0x%x\n", return_value.key_num); + } else { + switch (key->keycode) { + case KEY_WLAN: + case KEY_BLUETOOTH: + if (has_cap(ACER_CAP_WIRELESS)) + rfkill_set_sw_state(wireless_rfkill, + !(device_state & ACER_WMID3_GDS_WIRELESS)); + if (has_cap(ACER_CAP_THREEG)) + rfkill_set_sw_state(threeg_rfkill, + !(device_state & ACER_WMID3_GDS_THREEG)); + if (has_cap(ACER_CAP_BLUETOOTH)) + rfkill_set_sw_state(bluetooth_rfkill, + !(device_state & ACER_WMID3_GDS_BLUETOOTH)); + break; + } + sparse_keymap_report_entry(acer_wmi_input_dev, key, + 1, true); + } break; default: pr_warn("Unknown function number - %d - %d\n", -- cgit v0.10.2 From ae821c1b2fff22a5b6002e093126156a6d7c8b7b Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Tue, 31 May 2011 14:20:11 +0800 Subject: acer-wmi: fix bitwise bug when set device state Fix a bitwise bug that was found by Joern Heissler, it must be OR but not AND when we query current device state. Acked-by: Joern Heissler Cc: Carlos Corbacho Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Cc: Thomas Renninger Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 942798c..e1c4938 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -1156,9 +1156,9 @@ static acpi_status wmid3_set_device_status(u32 value, u16 device) struct wmid3_gds_input_param params = { .function_num = 0x1, .hotkey_number = 0x01, - .devices = ACER_WMID3_GDS_WIRELESS & - ACER_WMID3_GDS_THREEG & - ACER_WMID3_GDS_WIMAX & + .devices = ACER_WMID3_GDS_WIRELESS | + ACER_WMID3_GDS_THREEG | + ACER_WMID3_GDS_WIMAX | ACER_WMID3_GDS_BLUETOOTH, }; struct acpi_buffer input = { -- cgit v0.10.2 From 2d43f671c8fb0fd72e896a8b31e15b98916f707d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sun, 5 Jun 2011 16:22:34 -0300 Subject: thinkpad-acpi: handle some new HKEY 0x60xx events Handle some user interface events from the newer Lenovo models. We are likely to do something smart with these events in the future, for now, hide the ones we are already certain about from the user and userspace both. * Events 0x6000 and 0x6005 are key-related. 0x6005 is not properly identified yet. Ignore these events, and do not report them. * Event 0x6040 has not been properly identified yet, and we don't know if it is important (looks like it isn't, but still...). Keep reporting it. * Change the message the driver outputs on unknown 0x6xxx events, as all recent events are not related to thermal alarms. Degrade log level from ALERT to WARNING. Thanks to all users who reported these events or asked about them in a number of mailing lists. Your help is highly appreciated, even if I did took a lot of time to act on them. For that I apologise. I will list those that identified the reasons for the events as "reported-by", and I apologise in advance if I leave anyone out: it was not done on purpose, I made the mistake of not properly tagging all event report emails separately, and might have missed some. Signed-off-by: Henrique de Moraes Holschuh Reported-by: Markus Malkusch Reported-by: Peter Giles Signed-off-by: Matthew Garrett diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 1565eefd..4bc92ea 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -534,6 +534,8 @@ Events that are never propagated by the driver: 0x2404 System is waking up from hibernation to undock 0x2405 System is waking up from hibernation to eject bay 0x5010 Brightness level changed/control event +0x6000 KEYBOARD: Numlock key pressed +0x6005 KEYBOARD: Fn key pressed (TO BE VERIFIED) Events that are propagated by the driver to userspace: @@ -552,6 +554,7 @@ Events that are propagated by the driver to userspace: 0x6021 ALARM: a sensor is too hot 0x6022 ALARM: a sensor is extremely hot 0x6030 System thermal table changed +0x6040 Nvidia Optimus/AC adapter related (TO BE VERIFIED) Battery nearly empty alarms are a last resort attempt to get the operating system to hibernate or shutdown cleanly (0x2313), or shutdown diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 77f6e70..cdcd238 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -194,6 +194,10 @@ enum tpacpi_hkey_event_t { TP_HKEY_EV_PEN_REMOVED = 0x500c, /* tablet pen removed */ TP_HKEY_EV_BRGHT_CHANGED = 0x5010, /* backlight control event */ + /* Key-related user-interface events */ + TP_HKEY_EV_KEY_NUMLOCK = 0x6000, /* NumLock key pressed */ + TP_HKEY_EV_KEY_FN = 0x6005, /* Fn key pressed? E420 */ + /* Thermal events */ TP_HKEY_EV_ALARM_BAT_HOT = 0x6011, /* battery too hot */ TP_HKEY_EV_ALARM_BAT_XHOT = 0x6012, /* battery critically hot */ @@ -201,6 +205,10 @@ enum tpacpi_hkey_event_t { TP_HKEY_EV_ALARM_SENSOR_XHOT = 0x6022, /* sensor critically hot */ TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* thermal table changed */ + TP_HKEY_EV_UNK_6040 = 0x6040, /* Related to AC change? + some sort of APM hint, + W520 */ + /* Misc */ TP_HKEY_EV_RFKILL_CHANGED = 0x7000, /* rfkill switch changed */ }; @@ -3547,13 +3555,13 @@ static bool hotkey_notify_usrevent(const u32 hkey, static void thermal_dump_all_sensors(void); -static bool hotkey_notify_thermal(const u32 hkey, +static bool hotkey_notify_6xxx(const u32 hkey, bool *send_acpi_ev, bool *ignore_acpi_ev) { bool known = true; - /* 0x6000-0x6FFF: thermal alarms */ + /* 0x6000-0x6FFF: thermal alarms/notices and keyboard events */ *send_acpi_ev = true; *ignore_acpi_ev = false; @@ -3582,8 +3590,17 @@ static bool hotkey_notify_thermal(const u32 hkey, "a sensor reports something is extremely hot!\n"); /* recommended action: immediate sleep/hibernate */ break; + + case TP_HKEY_EV_KEY_NUMLOCK: + case TP_HKEY_EV_KEY_FN: + /* key press events, we just ignore them as long as the EC + * is still reporting them in the normal keyboard stream */ + *send_acpi_ev = false; + *ignore_acpi_ev = true; + return true; + default: - pr_alert("THERMAL ALERT: unknown thermal alarm received\n"); + pr_warn("unknown possible thermal alarm or keyboard event received\n"); known = false; } @@ -3668,8 +3685,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) &ignore_acpi_ev); break; case 6: - /* 0x6000-0x6FFF: thermal alarms */ - known_ev = hotkey_notify_thermal(hkey, &send_acpi_ev, + /* 0x6000-0x6FFF: thermal alarms/notices and + * keyboard events */ + known_ev = hotkey_notify_6xxx(hkey, &send_acpi_ev, &ignore_acpi_ev); break; case 7: -- cgit v0.10.2 From 96b269c1b0e5a218096aa6ff240d2286e99ddd6d Mon Sep 17 00:00:00 2001 From: Andre Bartke Date: Fri, 3 Jun 2011 20:55:43 +0200 Subject: drivers/platform/x86: Fix memory leak data is not freed in the error case of compal_probe(). Signed-off-by: Andre Bartke Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 3f204fd..8877b83 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -1030,8 +1030,10 @@ static int __devinit compal_probe(struct platform_device *pdev) initialize_fan_control_data(data); err = sysfs_create_group(&pdev->dev.kobj, &compal_attribute_group); - if (err) + if (err) { + kfree(data); return err; + } data->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(data->hwmon_dev)) { -- cgit v0.10.2 From a50245af782ea85b1d5ad23e1015e0ac52996b27 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sun, 5 Jun 2011 16:22:35 -0300 Subject: thinkpad-acpi: handle HKEY 0x4010, 0x4011 events Handle events 0x4010 and 0x4011 so that we do not pester users about them. These events report when the thinkpad is docked/undocked to a native hotplug dock (i.e. one that does not need ACPI handling, nor is represented in the ACPI device tree). Such docks are based on USB 2.0/3.0, and also work as port replicators. We really want a proper dock class to report these, or at least new input EV_SW events. Since it is not clear which one to use yet, keep reporting them as vendor-specific ThinkPad events. WARNING: As defined by the thinkpad-acpi sysfs ABI rules of engagement, the vendor-specific events will be REMOVED as soon as generic events are made available (duplicate events are a big problem), with an appropriate update to the thinkpad-acpi sysfs/event ABI versioning. Userspace is already prepared to provide easy backwards compatibility for such changes when convenient to the distro (see acpi-fakekey). * Event 0x4010: docking to hotplug dock/port replicator * Event 0x4011: undocking from hotplug dock/port replicator Typical usecase would be to trigger display reconfiguration. Reports mention T410, T510, and series 3 docks/port replicators. Special thanks to Robert de Rooy for his extensive report and analysis of the situation. http://www.thinkwiki.org/wiki/ThinkPad_Port_Replicator_Series_3 http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Series_3 http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3 http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3_for_Mobile_Workstations http://lenovoblogs.com/insidethebox/?p=290 Signed-off-by: Henrique de Moraes Holschuh Cc: Matthew Garrett Reported-by: Claudius Hubig Reported-by: Doctor Bill Reported-by: Korte Noack Reported-by: Robert de Rooy Reported-by: Sebastian Will Signed-off-by: Matthew Garrett diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 4bc92ea..6181548 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -547,6 +547,8 @@ Events that are propagated by the driver to userspace: 0x3006 Bay hotplug request (hint to power up SATA link when the optical drive tray is ejected) 0x4003 Undocked (see 0x2x04), can sleep again +0x4010 Docked into hotplug port replicator (non-ACPI dock) +0x4011 Undocked from hotplug port replicator (non-ACPI dock) 0x500B Tablet pen inserted into its storage bay 0x500C Tablet pen removed from its storage bay 0x6011 ALARM: battery is too hot diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index cdcd238..26c5b11 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -184,6 +184,10 @@ enum tpacpi_hkey_event_t { /* Misc bay events */ TP_HKEY_EV_OPTDRV_EJ = 0x3006, /* opt. drive tray ejected */ + TP_HKEY_EV_HOTPLUG_DOCK = 0x4010, /* docked into hotplug dock + or port replicator */ + TP_HKEY_EV_HOTPLUG_UNDOCK = 0x4011, /* undocked from hotplug + dock or port replicator */ /* User-interface events */ TP_HKEY_EV_LID_CLOSE = 0x5001, /* laptop lid closed */ @@ -3521,6 +3525,34 @@ static bool hotkey_notify_wakeup(const u32 hkey, return true; } +static bool hotkey_notify_dockevent(const u32 hkey, + bool *send_acpi_ev, + bool *ignore_acpi_ev) +{ + /* 0x4000-0x4FFF: dock-related events */ + *send_acpi_ev = true; + *ignore_acpi_ev = false; + + switch (hkey) { + case TP_HKEY_EV_UNDOCK_ACK: + /* ACPI undock operation completed after wakeup */ + hotkey_autosleep_ack = 1; + pr_info("undocked\n"); + hotkey_wakeup_hotunplug_complete_notify_change(); + return true; + + case TP_HKEY_EV_HOTPLUG_DOCK: /* docked to port replicator */ + pr_info("docked into hotplug port replicator\n"); + return true; + case TP_HKEY_EV_HOTPLUG_UNDOCK: /* undocked from port replicator */ + pr_info("undocked from hotplug port replicator\n"); + return true; + + default: + return false; + } +} + static bool hotkey_notify_usrevent(const u32 hkey, bool *send_acpi_ev, bool *ignore_acpi_ev) @@ -3669,15 +3701,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } break; case 4: - /* 0x4000-0x4FFF: dock-related wakeups */ - if (hkey == TP_HKEY_EV_UNDOCK_ACK) { - hotkey_autosleep_ack = 1; - pr_info("undocked\n"); - hotkey_wakeup_hotunplug_complete_notify_change(); - known_ev = true; - } else { - known_ev = false; - } + /* 0x4000-0x4FFF: dock-related events */ + known_ev = hotkey_notify_dockevent(hkey, &send_acpi_ev, + &ignore_acpi_ev); break; case 5: /* 0x5000-0x5FFF: human interface helpers */ -- cgit v0.10.2 From 60cfa098dc60a9988e18d0bbab735e10c744e6fe Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 29 Jun 2011 11:43:30 +0800 Subject: platform-drivers-x86: set backlight type to BACKLIGHT_PLATFORM Some newly added drivers do not set backlight type, as a result /sys/class/backlight//type shows incorrect backlight type. Signed-off-by: Axel Lin Cc: Corentin Chary Cc: Yin Kangkai Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 00460cb..3c7857c 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1025,6 +1025,7 @@ static int asus_wmi_backlight_init(struct asus_wmi *asus) return power; memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; props.max_brightness = max; bd = backlight_device_register(asus->driver->name, &asus->platform_device->dev, asus, diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c index e936364..7f88c79 100644 --- a/drivers/platform/x86/intel_oaktrail.c +++ b/drivers/platform/x86/intel_oaktrail.c @@ -250,6 +250,7 @@ static int oaktrail_backlight_init(void) struct backlight_properties props; memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX; bd = backlight_device_register(DRIVER_NAME, &oaktrail_device->dev, NULL, -- cgit v0.10.2 From 659fb32d1b67476f4ade25e9ea0e2642a5b9c4b5 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Wed, 6 Jul 2011 12:41:31 -0400 Subject: genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd) This fixes a regression introduced by e59347a "arm: orion: Use generic irq chip". Depending on the device, interrupts acknowledgement is done by setting or by clearing a dedicated register. Replace irq_gc_ack() with some {set,clr}_bit variants allows to handle both cases. Note that this patch affects the following SoCs: Davinci, Samsung and Orion. Except for this last, the change is minor: irq_gc_ack() is just renamed into irq_gc_ack_set_bit(). For the Orion SoCs, the edge GPIO interrupts support is currently broken. irq_gc_ack() try to acknowledge a such interrupt by setting the corresponding cause register bit. The Orion GPIO device expect the opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used. Tested on Network Space v2. Reported-by: Joey Oravec Signed-off-by: Simon Guinot Signed-off-by: Arnd Bergmann diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index bfe68ec..d8c1af0 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -53,7 +53,7 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq); ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 5b4fffa..41ab97e 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -432,7 +432,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; ct->regs.ack = GPIO_EDGE_CAUSE_OFF; ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_clr_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 135abda..327ab9f 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -152,7 +152,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) if (!gc) return -ENOMEM; ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p_gpioint_set_type, diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 32582c0..0e46588 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -55,7 +55,7 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, handle_level_irq); ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->regs.ack = S3C64XX_UINTP; diff --git a/include/linux/irq.h b/include/linux/irq.h index 8b45384..baa397e 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -676,7 +676,8 @@ void irq_gc_mask_disable_reg(struct irq_data *d); void irq_gc_mask_set_bit(struct irq_data *d); void irq_gc_mask_clr_bit(struct irq_data *d); void irq_gc_unmask_enable_reg(struct irq_data *d); -void irq_gc_ack(struct irq_data *d); +void irq_gc_ack_set_bit(struct irq_data *d); +void irq_gc_ack_clr_bit(struct irq_data *d); void irq_gc_mask_disable_reg_and_ack(struct irq_data *d); void irq_gc_eoi(struct irq_data *d); int irq_gc_set_wake(struct irq_data *d, unsigned int on); diff --git a/kernel/irq/generic-chip.c b/kernel/irq/generic-chip.c index 31a9db7..3a2cab4 100644 --- a/kernel/irq/generic-chip.c +++ b/kernel/irq/generic-chip.c @@ -101,10 +101,10 @@ void irq_gc_unmask_enable_reg(struct irq_data *d) } /** - * irq_gc_ack - Ack pending interrupt + * irq_gc_ack_set_bit - Ack pending interrupt via setting bit * @d: irq_data */ -void irq_gc_ack(struct irq_data *d) +void irq_gc_ack_set_bit(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); u32 mask = 1 << (d->irq - gc->irq_base); @@ -115,6 +115,20 @@ void irq_gc_ack(struct irq_data *d) } /** + * irq_gc_ack_clr_bit - Ack pending interrupt via clearing bit + * @d: irq_data + */ +void irq_gc_ack_clr_bit(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + u32 mask = ~(1 << (d->irq - gc->irq_base)); + + irq_gc_lock(gc); + irq_reg_writel(mask, gc->reg_base + cur_regs(d)->ack); + irq_gc_unlock(gc); +} + +/** * irq_gc_mask_disable_reg_and_ack- Mask and ack pending interrupt * @d: irq_data */ -- cgit v0.10.2 From ee339fe63ac408e4604c1c88b1f9a428f2511b70 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 6 Jul 2011 09:43:16 -0400 Subject: xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci. Previously we would check for acpi_sci_override_gsi == gsi every time a PCI device was enabled. That works during early bootup, but later on it could lead to triggering unnecessarily the acpi_gsi_to_irq(..) lookup. The reason is that acpi_sci_override_gsi was declared in __initdata and after early bootup could contain bogus values. This patch moves the check for acpi_sci_override_gsi to the site where the ACPI SCI is preset. CC: stable@kernel.org Reported-by: Raghavendra D Prabhu Tested-by: Raghavendra D Prabhu [http://lists.xensource.com/archives/html/xen-devel/2011-07/msg00154.html] Suggested-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index fe00830..f567965 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -327,13 +327,12 @@ int __init pci_xen_hvm_init(void) } #ifdef CONFIG_XEN_DOM0 -static int xen_register_pirq(u32 gsi, int triggering) +static int xen_register_pirq(u32 gsi, int gsi_override, int triggering) { int rc, pirq, irq = -1; struct physdev_map_pirq map_irq; int shareable = 0; char *name; - bool gsi_override = false; if (!xen_pv_domain()) return -1; @@ -345,31 +344,12 @@ static int xen_register_pirq(u32 gsi, int triggering) shareable = 1; name = "ioapic-level"; } - pirq = xen_allocate_pirq_gsi(gsi); if (pirq < 0) goto out; - /* Before we bind the GSI to a Linux IRQ, check whether - * we need to override it with bus_irq (IRQ) value. Usually for - * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so: - * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) - * but there are oddballs where the IRQ != GSI: - * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) - * which ends up being: gsi_to_irq[9] == 20 - * (which is what acpi_gsi_to_irq ends up calling when starting the - * the ACPI interpreter and keels over since IRQ 9 has not been - * setup as we had setup IRQ 20 for it). - */ - if (gsi == acpi_sci_override_gsi) { - /* Check whether the GSI != IRQ */ - acpi_gsi_to_irq(gsi, &irq); - if (irq != gsi) - /* Bugger, we MUST have that IRQ. */ - gsi_override = true; - } - if (gsi_override) - irq = xen_bind_pirq_gsi_to_irq(irq, pirq, shareable, name); + if (gsi_override >= 0) + irq = xen_bind_pirq_gsi_to_irq(gsi_override, pirq, shareable, name); else irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name); if (irq < 0) @@ -392,7 +372,7 @@ out: return irq; } -static int xen_register_gsi(u32 gsi, int triggering, int polarity) +static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity) { int rc, irq; struct physdev_setup_gsi setup_gsi; @@ -403,7 +383,7 @@ static int xen_register_gsi(u32 gsi, int triggering, int polarity) printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n", gsi, triggering, polarity); - irq = xen_register_pirq(gsi, triggering); + irq = xen_register_pirq(gsi, gsi_override, triggering); setup_gsi.gsi = gsi; setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1); @@ -425,6 +405,8 @@ static __init void xen_setup_acpi_sci(void) int rc; int trigger, polarity; int gsi = acpi_sci_override_gsi; + int irq = -1; + int gsi_override = -1; if (!gsi) return; @@ -441,7 +423,25 @@ static __init void xen_setup_acpi_sci(void) printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d " "polarity=%d\n", gsi, trigger, polarity); - gsi = xen_register_gsi(gsi, trigger, polarity); + /* Before we bind the GSI to a Linux IRQ, check whether + * we need to override it with bus_irq (IRQ) value. Usually for + * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so: + * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) + * but there are oddballs where the IRQ != GSI: + * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) + * which ends up being: gsi_to_irq[9] == 20 + * (which is what acpi_gsi_to_irq ends up calling when starting the + * the ACPI interpreter and keels over since IRQ 9 has not been + * setup as we had setup IRQ 20 for it). + */ + /* Check whether the GSI != IRQ */ + if (acpi_gsi_to_irq(gsi, &irq) == 0) { + if (irq >= 0 && irq != gsi) + /* Bugger, we MUST have that IRQ. */ + gsi_override = irq; + } + + gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity); printk(KERN_INFO "xen: acpi sci %d\n", gsi); return; @@ -450,7 +450,7 @@ static __init void xen_setup_acpi_sci(void) static int acpi_register_gsi_xen(struct device *dev, u32 gsi, int trigger, int polarity) { - return xen_register_gsi(gsi, trigger, polarity); + return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity); } static int __init pci_xen_initial_domain(void) @@ -489,7 +489,7 @@ void __init xen_setup_pirqs(void) if (acpi_get_override_irq(irq, &trigger, &polarity) == -1) continue; - xen_register_pirq(irq, + xen_register_pirq(irq, -1 /* no GSI override */, trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE); } } -- cgit v0.10.2 From bd7fdbcaa2d06d446577fd3c9b81847b04469e01 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 6 Jul 2011 17:58:56 -0700 Subject: ASoC: ak4642: fixup snd_soc_update_bits mask for PW_MGMT2 mask didn't cover update-data Signed-off-by: Kuninori Morimoto Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c index 4be0570..65f4604 100644 --- a/sound/soc/codecs/ak4642.c +++ b/sound/soc/codecs/ak4642.c @@ -357,7 +357,7 @@ static int ak4642_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) default: return -EINVAL; } - snd_soc_update_bits(codec, PW_MGMT2, MS, data); + snd_soc_update_bits(codec, PW_MGMT2, MS | MCKO | PMPLL, data); snd_soc_update_bits(codec, MD_CTL1, BCKO_MASK, bcko); /* format type */ -- cgit v0.10.2 From 6ae8ec27868bfdbb815287bee8146acbefaee867 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 5 Jul 2011 17:25:32 +0200 Subject: ssb: fix init regression of hostmode PCI core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Our workarounds seem to be clientmode PCI specific. Using SPROM workaround on SoC resulted in Oops: Data bus error, epc == 8017ed58, ra == 80225838 Oops[#1]: Cpu 0 $ 0 : 00000000 10008000 b8000000 00000001 $ 4 : 80293b5c 00000caa ffffffff 00000000 $ 8 : 0000000a 00000003 00000001 696d6d20 $12 : ffffffff 00000000 00000000 ffffffff $16 : 802d0140 b8004800 802c0000 00000000 $20 : 00000000 802c0000 00000000 802d04d4 $24 : 00000018 80151a00 $28 : 81816000 81817df8 8029bda0 80225838 Hi : 00000000 Lo : 00000000 epc : 8017ed58 ssb_ssb_read16+0x48/0x60 Not tainted ra : 80225838 ssb_pcicore_init+0x54/0x3b4 Reported-by: Hauke Mehrtens Signed-off-by: Rafał Miłecki Tested-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 2a20dab..d6620ad 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -516,8 +516,17 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { + ssb_pcicore_fix_sprom_core_index(pc); + /* Disable PCI interrupts. */ ssb_write32(pc->dev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { + ssb_pcicore_serdes_workaround(pc); + /* TODO: ASPM */ + /* TODO: Clock Request Update */ + } } void ssb_pcicore_init(struct ssb_pcicore *pc) @@ -529,8 +538,6 @@ void ssb_pcicore_init(struct ssb_pcicore *pc) if (!ssb_device_is_enabled(dev)) ssb_device_enable(dev, 0); - ssb_pcicore_fix_sprom_core_index(pc); - #ifdef CONFIG_SSB_PCICORE_HOSTMODE pc->hostmode = pcicore_is_in_hostmode(pc); if (pc->hostmode) @@ -538,13 +545,6 @@ void ssb_pcicore_init(struct ssb_pcicore *pc) #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ if (!pc->hostmode) ssb_pcicore_init_clientmode(pc); - - /* Additional PCIe always once-executed workarounds */ - if (dev->id.coreid == SSB_DEV_PCIE) { - ssb_pcicore_serdes_workaround(pc); - /* TODO: ASPM */ - /* TODO: Clock Request Update */ - } } static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address) -- cgit v0.10.2 From 1186980dafcd14d0e257a4dd6990cefdc6f3e362 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 7 Jul 2011 15:18:27 +0300 Subject: mac80211: fix ie memory allocation for scheduled scans We were not allocating memory for the IEs passed in the scheduled_scan request and this was causing memory corruption (buffer overflow). Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 58ffa7d..669d2e3 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -877,7 +877,8 @@ int ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata, for (i = 0; i < IEEE80211_NUM_BANDS; i++) { local->sched_scan_ies.ie[i] = kzalloc(2 + IEEE80211_MAX_SSID_LEN + - local->scan_ies_len, + local->scan_ies_len + + req->ie_len, GFP_KERNEL); if (!local->sched_scan_ies.ie[i]) { ret = -ENOMEM; -- cgit v0.10.2 From 34459512ffa7236c849466e3bd604801389734e1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Jul 2011 18:24:54 +0200 Subject: mac80211: fix TKIP replay vulnerability Unlike CCMP, the presence or absence of the QoS field doesn't change the encryption, only the TID is used. When no QoS field is present, zero is used as the TID value. This means that it is possible for an attacker to take a QoS packet with TID 0 and replay it as a non-QoS packet. Unfortunately, mac80211 uses different IVs for checking the validity of the packet's TKIP IV when it checks TID 0 and when it checks non-QoS packets. This means it is vulnerable to this replay attack. To fix this, use the same replay counter for TID 0 and non-QoS packets by overriding the rx->queue value to 0 if it is 16 (non-QoS). This is a minimal fix for now. I caused this issue in commit 1411f9b531f0a910cd1c85a337737c1e6ffbae6a Author: Johannes Berg Date: Thu Jul 10 10:11:02 2008 +0200 mac80211: fix RX sequence number check while fixing a sequence number issue (there, a separate counter needs to be used). Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index d91c1a2..8f6a302 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -86,6 +86,11 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) struct sk_buff *skb = rx->skb; struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + int queue = rx->queue; + + /* otherwise, TKIP is vulnerable to TID 0 vs. non-QoS replays */ + if (rx->queue == NUM_RX_DATA_QUEUES - 1) + queue = 0; /* * it makes no sense to check for MIC errors on anything other @@ -148,8 +153,8 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx) update_iv: /* update IV in key information to be able to detect replays */ - rx->key->u.tkip.rx[rx->queue].iv32 = rx->tkip_iv32; - rx->key->u.tkip.rx[rx->queue].iv16 = rx->tkip_iv16; + rx->key->u.tkip.rx[queue].iv32 = rx->tkip_iv32; + rx->key->u.tkip.rx[queue].iv16 = rx->tkip_iv16; return RX_CONTINUE; @@ -241,6 +246,11 @@ ieee80211_crypto_tkip_decrypt(struct ieee80211_rx_data *rx) struct ieee80211_key *key = rx->key; struct sk_buff *skb = rx->skb; struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); + int queue = rx->queue; + + /* otherwise, TKIP is vulnerable to TID 0 vs. non-QoS replays */ + if (rx->queue == NUM_RX_DATA_QUEUES - 1) + queue = 0; hdrlen = ieee80211_hdrlen(hdr->frame_control); @@ -261,7 +271,7 @@ ieee80211_crypto_tkip_decrypt(struct ieee80211_rx_data *rx) res = ieee80211_tkip_decrypt_data(rx->local->wep_rx_tfm, key, skb->data + hdrlen, skb->len - hdrlen, rx->sta->sta.addr, - hdr->addr1, hwaccel, rx->queue, + hdr->addr1, hwaccel, queue, &rx->tkip_iv32, &rx->tkip_iv16); if (res != TKIP_DECRYPT_OK) -- cgit v0.10.2 From 4e4a31fb95d88518180517bae3098a23ebde9f9c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 14 Jun 2011 03:56:09 -0300 Subject: [media] tuner-core: fix s_std and s_tuner Both s_std and s_tuner are broken because set_mode_freq is called before the new std (for s_std) and audmode (for s_tuner) are set. This patch splits set_mode_freq in a set_mode and a set_freq and in s_std/s_tuner first calls set_mode, and if that returns 0 (i.e. the mode is supported) then they set t->std/t->audmode and call set_freq. This fixes a bug where changing std or audmode would actually change it to the previous value. Discovered while testing analog TV standards for cx18 with a tda18271 tuner. Cc: stable@kernel.org Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 9363ed9..4879704 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -724,19 +724,15 @@ static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode) } /** - * set_mode_freq - Switch tuner to other mode. - * @client: struct i2c_client pointer + * set_mode - Switch tuner to other mode. * @t: a pointer to the module's internal struct_tuner * @mode: enum v4l2_type (radio or TV) - * @freq: frequency to set (0 means to use the previous one) * * If tuner doesn't support the needed mode (radio or TV), prints a * debug message and returns -EINVAL, changing its state to standby. - * Otherwise, changes the state and sets frequency to the last value, if - * the tuner can sleep or if it supports both Radio and TV. + * Otherwise, changes the mode and returns 0. */ -static int set_mode_freq(struct i2c_client *client, struct tuner *t, - enum v4l2_tuner_type mode, unsigned int freq) +static int set_mode(struct tuner *t, enum v4l2_tuner_type mode) { struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; @@ -752,17 +748,27 @@ static int set_mode_freq(struct i2c_client *client, struct tuner *t, t->mode = mode; tuner_dbg("Changing to mode %d\n", mode); } + return 0; +} + +/** + * set_freq - Set the tuner to the desired frequency. + * @t: a pointer to the module's internal struct_tuner + * @freq: frequency to set (0 means to use the current frequency) + */ +static void set_freq(struct tuner *t, unsigned int freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(&t->sd); + if (t->mode == V4L2_TUNER_RADIO) { - if (freq) - t->radio_freq = freq; - set_radio_freq(client, t->radio_freq); + if (!freq) + freq = t->radio_freq; + set_radio_freq(client, freq); } else { - if (freq) - t->tv_freq = freq; - set_tv_freq(client, t->tv_freq); + if (!freq) + freq = t->tv_freq; + set_tv_freq(client, freq); } - - return 0; } /* @@ -1058,10 +1064,9 @@ static void tuner_status(struct dvb_frontend *fe) static int tuner_s_radio(struct v4l2_subdev *sd) { struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode_freq(client, t, V4L2_TUNER_RADIO, 0) == -EINVAL) - return 0; + if (set_mode(t, V4L2_TUNER_RADIO) == 0) + set_freq(t, 0); return 0; } @@ -1093,25 +1098,22 @@ static int tuner_s_power(struct v4l2_subdev *sd, int on) static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std) { struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode_freq(client, t, V4L2_TUNER_ANALOG_TV, 0) == -EINVAL) + if (set_mode(t, V4L2_TUNER_ANALOG_TV)) return 0; t->std = std; tuner_fixup_std(t); - + set_freq(t, 0); return 0; } static int tuner_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) { struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - - if (set_mode_freq(client, t, f->type, f->frequency) == -EINVAL) - return 0; + if (set_mode(t, f->type) == 0) + set_freq(t, f->frequency); return 0; } @@ -1180,13 +1182,13 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) static int tuner_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) { struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode_freq(client, t, vt->type, 0) == -EINVAL) + if (set_mode(t, vt->type)) return 0; if (t->mode == V4L2_TUNER_RADIO) t->audmode = vt->audmode; + set_freq(t, 0); return 0; } @@ -1221,7 +1223,8 @@ static int tuner_resume(struct i2c_client *c) tuner_dbg("resume\n"); if (!t->standby) - set_mode_freq(c, t, t->type, 0); + if (set_mode(t, t->type) == 0) + set_freq(t, 0); return 0; } -- cgit v0.10.2 From 9bf0ef060ebae452c07cf5b0616247780740bb50 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 13 Jun 2011 09:21:56 -0300 Subject: [media] tuner-core: fix tuner_resume: use t->mode instead of t->type set_mode is called with t->type, which is the tuner type. Instead, use t->mode which is the actual tuner mode (i.e. radio vs tv). Cc: stable@kernel.org Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 4879704..1843fc2 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1223,7 +1223,7 @@ static int tuner_resume(struct i2c_client *c) tuner_dbg("resume\n"); if (!t->standby) - if (set_mode(t, t->type) == 0) + if (set_mode(t, t->mode) == 0) set_freq(t, 0); return 0; -- cgit v0.10.2 From 227690df75382e46a4f6ea1bbc5df855a674b47f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 12 Jun 2011 06:36:41 -0300 Subject: [media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner The subdevs are supposed to receive a valid tuner type for the g_frequency and g/s_tuner subdev ops. Some drivers do this, others don't. So prefill this in v4l2-ioctl.c based on whether the device node from which this is called is a radio node or not. The spec does not require applications to fill in the type, and if they leave it at 0 then the 'check_mode' call in tuner-core.c will return an error and the ioctl does nothing. Cc: stable@kernel.org Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 506edcc..a2e442a 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1822,6 +1822,8 @@ static long __video_do_ioctl(struct file *file, if (!ops->vidioc_g_tuner) break; + p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; ret = ops->vidioc_g_tuner(file, fh, p); if (!ret) dbgarg(cmd, "index=%d, name=%s, type=%d, " @@ -1840,6 +1842,8 @@ static long __video_do_ioctl(struct file *file, if (!ops->vidioc_s_tuner) break; + p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; dbgarg(cmd, "index=%d, name=%s, type=%d, " "capability=0x%x, rangelow=%d, " "rangehigh=%d, signal=%d, afc=%d, " @@ -1858,6 +1862,8 @@ static long __video_do_ioctl(struct file *file, if (!ops->vidioc_g_frequency) break; + p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; ret = ops->vidioc_g_frequency(file, fh, p); if (!ret) dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n", -- cgit v0.10.2 From 50e9efd60b213ce43ad6979bfc18e25eec2d8413 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 12 Jun 2011 06:39:52 -0300 Subject: [media] pvrusb2: fix g/s_tuner support The tuner-core subdev requires that the type field of v4l2_tuner is filled in correctly. This is done in v4l2-ioctl.c, but pvrusb2 doesn't use that yet, so we have to do it manually based on whether the current input is radio or not. Tested with my pvrusb2. Signed-off-by: Hans Verkuil Acked-by: Mike Isely Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 9d0dd08..e98d382 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -3046,6 +3046,8 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw) if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) { struct v4l2_tuner vt; memset(&vt, 0, sizeof(vt)); + vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; vt.audmode = hdw->audiomode_val; v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt); } @@ -5171,6 +5173,8 @@ void pvr2_hdw_status_poll(struct pvr2_hdw *hdw) { struct v4l2_tuner *vtp = &hdw->tuner_signal_info; memset(vtp, 0, sizeof(*vtp)); + vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; hdw->tuner_signal_stale = 0; /* Note: There apparently is no replacement for VIDIOC_CROPCAP using v4l2-subdev - therefore we can't support that AT ALL right -- cgit v0.10.2 From a024c1a6b274e11596d124619e43c25560f64c01 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 12 Jun 2011 07:02:43 -0300 Subject: [media] bttv: fix s_tuner for radio Fix typo: g_tuner should have been s_tuner. Tested with a bttv card. Cc: stable@kernel.org Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index a97cf27..834a483 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3474,7 +3474,7 @@ static int radio_s_tuner(struct file *file, void *priv, if (0 != t->index) return -EINVAL; - bttv_call_all(btv, tuner, g_tuner, t); + bttv_call_all(btv, tuner, s_tuner, t); return 0; } -- cgit v0.10.2 From 6293698277f04eb1623536887651381ed3abc8d0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 13 Jun 2011 09:38:54 -0300 Subject: [media] feature-removal-schedule: change in how radio device nodes are handled Radio devices have weird side-effects when used with combined TV/radio tuners and the V4L2 spec is ambiguous on how it should work. This results in inconsistent driver behavior which makes life hard for everyone. Be more strict in when and how the switch between radio and tv mode takes place and make sure all drivers behave the same. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1a9446b..9df0e09 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -600,3 +600,25 @@ Why: Superseded by the UVCIOC_CTRL_QUERY ioctl. Who: Laurent Pinchart ---------------------------- + +What: For VIDIOC_S_FREQUENCY the type field must match the device node's type. + If not, return -EINVAL. +When: 3.2 +Why: It makes no sense to switch the tuner to radio mode by calling + VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by + calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a + move to more consistent handling of tv and radio tuners. +Who: Hans Verkuil + +---------------------------- + +What: Opening a radio device node will no longer automatically switch the + tuner mode from tv to radio. +When: 3.3 +Why: Just opening a V4L device should not change the state of the hardware + like that. It's very unexpected and against the V4L spec. Instead, you + switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second + and last step of the move to consistent handling of tv and radio tuners. +Who: Hans Verkuil + +---------------------------- -- cgit v0.10.2 From e206fc5e3de0e38a35b6f92941c913b6d8343fc6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 13 Jun 2011 09:34:56 -0300 Subject: [media] v4l2-subdev.h: remove unused s_mode tuner op s_mode is no longer used, so remove it. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 1562c4f..2245020 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -173,16 +173,13 @@ struct v4l2_subdev_core_ops { struct v4l2_event_subscription *sub); }; -/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio. - - s_radio: v4l device was opened in Radio mode, to be replaced by s_mode. +/* s_radio: v4l device was opened in radio mode. s_type_addr: sets tuner type and its I2C addr. s_config: sets tda9887 specific stuff, like port1, port2 and qss */ struct v4l2_subdev_tuner_ops { - int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type); int (*s_radio)(struct v4l2_subdev *sd); int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); -- cgit v0.10.2 From 338e9e1ad541cbb2a3fa5839376ff6c138d40301 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 13 Jun 2011 09:35:56 -0300 Subject: [media] tuner-core/v4l2-subdev: document that the type field has to be filled in The tuner ops g_frequency, g_tuner and s_tuner require that the tuner type field is filled in. Document this. The tuner-core doc is based on a patch from Mauro Carvalho Chehab . Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 1843fc2..6c007aa 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1117,6 +1117,16 @@ static int tuner_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) return 0; } +/** + * tuner_g_frequency - Get the tuned frequency for the tuner + * @sd: pointer to struct v4l2_subdev + * @f: pointer to struct v4l2_frequency + * + * At return, the structure f will be filled with tuner frequency + * if the tuner matches the f->type. + * Note: f->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) { struct tuner *t = to_tuner(sd); @@ -1139,6 +1149,16 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) return 0; } +/** + * tuner_g_tuner - Fill in tuner information + * @sd: pointer to struct v4l2_subdev + * @vt: pointer to struct v4l2_tuner + * + * At return, the structure vt will be filled with tuner information + * if the tuner matches vt->type. + * Note: vt->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) { struct tuner *t = to_tuner(sd); @@ -1179,6 +1199,15 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) return 0; } +/** + * tuner_s_tuner - Set the tuner's audio mode + * @sd: pointer to struct v4l2_subdev + * @vt: pointer to struct v4l2_tuner + * + * Sets the audio mode if the tuner matches vt->type. + * Note: vt->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ static int tuner_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) { struct tuner *t = to_tuner(sd); diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 2245020..2884e3e 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -175,6 +175,13 @@ struct v4l2_subdev_core_ops { /* s_radio: v4l device was opened in radio mode. + g_frequency: freq->type must be filled in. Normally done by video_ioctl2 + or the bridge driver. + + g_tuner: + s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the + bridge driver. + s_type_addr: sets tuner type and its I2C addr. s_config: sets tda9887 specific stuff, like port1, port2 and qss -- cgit v0.10.2 From 487833018eb2b969f20457fcf1956b3c6dbfad51 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 13 Jun 2011 09:47:56 -0300 Subject: [media] tuner-core: simplify the standard fixup Get rid of a number of unnecessary tuner_dbg messages by simplifying the std fixup function. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 6c007aa..1e7505e 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -823,7 +823,8 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) /** * tuner_fixup_std - force a given video standard variant * - * @t: tuner internal struct + * @t: tuner internal struct + * @std: TV standard * * A few devices or drivers have problem to detect some standard variations. * On other operational systems, the drivers generally have a per-country @@ -833,57 +834,39 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) * to distinguish all video standard variations, a modprobe parameter can * be used to force a video standard match. */ -static int tuner_fixup_std(struct tuner *t) +static v4l2_std_id tuner_fixup_std(struct tuner *t, v4l2_std_id std) { - if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) { + if (pal[0] != '-' && (std & V4L2_STD_PAL) == V4L2_STD_PAL) { switch (pal[0]) { case '6': - tuner_dbg("insmod fixup: PAL => PAL-60\n"); - t->std = V4L2_STD_PAL_60; - break; + return V4L2_STD_PAL_60; case 'b': case 'B': case 'g': case 'G': - tuner_dbg("insmod fixup: PAL => PAL-BG\n"); - t->std = V4L2_STD_PAL_BG; - break; + return V4L2_STD_PAL_BG; case 'i': case 'I': - tuner_dbg("insmod fixup: PAL => PAL-I\n"); - t->std = V4L2_STD_PAL_I; - break; + return V4L2_STD_PAL_I; case 'd': case 'D': case 'k': case 'K': - tuner_dbg("insmod fixup: PAL => PAL-DK\n"); - t->std = V4L2_STD_PAL_DK; - break; + return V4L2_STD_PAL_DK; case 'M': case 'm': - tuner_dbg("insmod fixup: PAL => PAL-M\n"); - t->std = V4L2_STD_PAL_M; - break; + return V4L2_STD_PAL_M; case 'N': case 'n': - if (pal[1] == 'c' || pal[1] == 'C') { - tuner_dbg("insmod fixup: PAL => PAL-Nc\n"); - t->std = V4L2_STD_PAL_Nc; - } else { - tuner_dbg("insmod fixup: PAL => PAL-N\n"); - t->std = V4L2_STD_PAL_N; - } - break; - case '-': - /* default parameter, do nothing */ - break; + if (pal[1] == 'c' || pal[1] == 'C') + return V4L2_STD_PAL_Nc; + return V4L2_STD_PAL_N; default: tuner_warn("pal= argument not recognised\n"); break; } } - if ((t->std & V4L2_STD_SECAM) == V4L2_STD_SECAM) { + if (secam[0] != '-' && (std & V4L2_STD_SECAM) == V4L2_STD_SECAM) { switch (secam[0]) { case 'b': case 'B': @@ -891,63 +874,42 @@ static int tuner_fixup_std(struct tuner *t) case 'G': case 'h': case 'H': - tuner_dbg("insmod fixup: SECAM => SECAM-BGH\n"); - t->std = V4L2_STD_SECAM_B | - V4L2_STD_SECAM_G | - V4L2_STD_SECAM_H; - break; + return V4L2_STD_SECAM_B | + V4L2_STD_SECAM_G | + V4L2_STD_SECAM_H; case 'd': case 'D': case 'k': case 'K': - tuner_dbg("insmod fixup: SECAM => SECAM-DK\n"); - t->std = V4L2_STD_SECAM_DK; - break; + return V4L2_STD_SECAM_DK; case 'l': case 'L': - if ((secam[1] == 'C') || (secam[1] == 'c')) { - tuner_dbg("insmod fixup: SECAM => SECAM-L'\n"); - t->std = V4L2_STD_SECAM_LC; - } else { - tuner_dbg("insmod fixup: SECAM => SECAM-L\n"); - t->std = V4L2_STD_SECAM_L; - } - break; - case '-': - /* default parameter, do nothing */ - break; + if ((secam[1] == 'C') || (secam[1] == 'c')) + return V4L2_STD_SECAM_LC; + return V4L2_STD_SECAM_L; default: tuner_warn("secam= argument not recognised\n"); break; } } - if ((t->std & V4L2_STD_NTSC) == V4L2_STD_NTSC) { + if (ntsc[0] != '-' && (std & V4L2_STD_NTSC) == V4L2_STD_NTSC) { switch (ntsc[0]) { case 'm': case 'M': - tuner_dbg("insmod fixup: NTSC => NTSC-M\n"); - t->std = V4L2_STD_NTSC_M; - break; + return V4L2_STD_NTSC_M; case 'j': case 'J': - tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n"); - t->std = V4L2_STD_NTSC_M_JP; - break; + return V4L2_STD_NTSC_M_JP; case 'k': case 'K': - tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n"); - t->std = V4L2_STD_NTSC_M_KR; - break; - case '-': - /* default parameter, do nothing */ - break; + return V4L2_STD_NTSC_M_KR; default: tuner_info("ntsc= argument not recognised\n"); break; } } - return 0; + return std; } /* @@ -1102,8 +1064,9 @@ static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std) if (set_mode(t, V4L2_TUNER_ANALOG_TV)) return 0; - t->std = std; - tuner_fixup_std(t); + t->std = tuner_fixup_std(t, std); + if (t->std != std) + tuner_dbg("Fixup standard %llx to %llx\n", std, t->std); set_freq(t, 0); return 0; } -- cgit v0.10.2 From a6cf90a91551c767bed78a4418c26f41aed60cde Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 14 Jun 2011 04:03:26 -0300 Subject: [media] v4l2-ioctl.c: check for valid tuner type in S_HW_FREQ_SEEK Prohibit attempts to change the tuner to a type that is different from the device node the ioctl is called from. I.e. the type must be RADIO for a radio node and ANALOG_TV for a video/vbi node. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index a2e442a..69e8c6f 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1946,13 +1946,19 @@ static long __video_do_ioctl(struct file *file, case VIDIOC_S_HW_FREQ_SEEK: { struct v4l2_hw_freq_seek *p = arg; + enum v4l2_tuner_type type; if (!ops->vidioc_s_hw_freq_seek) break; + type = (vfd->vfl_type == VFL_TYPE_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; dbgarg(cmd, - "tuner=%d, type=%d, seek_upward=%d, wrap_around=%d\n", - p->tuner, p->type, p->seek_upward, p->wrap_around); - ret = ops->vidioc_s_hw_freq_seek(file, fh, p); + "tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u\n", + p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing); + if (p->type != type) + ret = -EINVAL; + else + ret = ops->vidioc_s_hw_freq_seek(file, fh, p); break; } case VIDIOC_ENUM_FRAMESIZES: -- cgit v0.10.2 From d16625e788b8871163ad991851ffba5f64c06d43 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 25 Jun 2011 10:24:49 -0300 Subject: [media] tuner-core: power up tuner when called with s_power(1) Drivers must be able to rely on s_power to power up subdevices. Note that at this moment no driver attempts to power up tuners. This probably isn't surprising since s_power(1) was never implemented in tuner-core.c until now. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 1e7505e..39af999 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1039,16 +1039,20 @@ static int tuner_s_radio(struct v4l2_subdev *sd) /** * tuner_s_power - controls the power state of the tuner * @sd: pointer to struct v4l2_subdev - * @on: a zero value puts the tuner to sleep + * @on: a zero value puts the tuner to sleep, non-zero wakes it up */ static int tuner_s_power(struct v4l2_subdev *sd, int on) { struct tuner *t = to_tuner(sd); struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - /* FIXME: Why this function don't wake the tuner if on != 0 ? */ - if (on) + if (on) { + if (t->standby && set_mode(t, t->mode) == 0) { + tuner_dbg("Waking up tuner\n"); + set_freq(t, 0); + } return 0; + } tuner_dbg("Putting tuner to sleep\n"); t->standby = true; -- cgit v0.10.2 From d118e294e27000bfd728308d7b74ba67350e779c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 25 Jun 2011 10:28:21 -0300 Subject: [media] cx18/ivtv: fix g_tuner support The driver shouldn't override vt->type, and the tuner name should be based on vt->type as well. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 1933d4d..e80134f 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -695,14 +695,10 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) cx18_call_all(cx, tuner, g_tuner, vt); - if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { + if (vt->type == V4L2_TUNER_RADIO) strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name)); - vt->type = V4L2_TUNER_RADIO; - } else { + else strlcpy(vt->name, "cx18 TV Tuner", sizeof(vt->name)); - vt->type = V4L2_TUNER_ANALOG_TV; - } - return 0; } diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index f9e347d..120c7d8 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -1184,14 +1184,10 @@ static int ivtv_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) ivtv_call_all(itv, tuner, g_tuner, vt); - if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) { + if (vt->type == V4L2_TUNER_RADIO) strlcpy(vt->name, "ivtv Radio Tuner", sizeof(vt->name)); - vt->type = V4L2_TUNER_RADIO; - } else { + else strlcpy(vt->name, "ivtv TV Tuner", sizeof(vt->name)); - vt->type = V4L2_TUNER_ANALOG_TV; - } - return 0; } -- cgit v0.10.2 From 5ad339a29858db6544052f98973d235129f9f49c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 26 Jun 2011 05:35:34 -0300 Subject: [media] tuner-core.c: don't change type field in g_tuner or g_frequency The tuner core should not silently change the type field in g_tuner and g_frequency. If the tuner is in a different mode than the one that was requested, then just fill in what you can and don't attempt to read afc, signal or rxsubchans values. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 39af999..cfa9f7e 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1101,8 +1101,7 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) if (check_mode(t, f->type) == -EINVAL) return 0; - f->type = t->mode; - if (fe_tuner_ops->get_frequency && !t->standby) { + if (f->type == t->mode && fe_tuner_ops->get_frequency && !t->standby) { u32 abs_freq; fe_tuner_ops->get_frequency(&t->fe, &abs_freq); @@ -1110,7 +1109,7 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) DIV_ROUND_CLOSEST(abs_freq * 2, 125) : DIV_ROUND_CLOSEST(abs_freq, 62500); } else { - f->frequency = (V4L2_TUNER_RADIO == t->mode) ? + f->frequency = (V4L2_TUNER_RADIO == f->type) ? t->radio_freq : t->tv_freq; } return 0; @@ -1134,32 +1133,33 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) if (check_mode(t, vt->type) == -EINVAL) return 0; - vt->type = t->mode; - if (analog_ops->get_afc) + if (vt->type == t->mode && analog_ops->get_afc) vt->afc = analog_ops->get_afc(&t->fe); - if (t->mode == V4L2_TUNER_ANALOG_TV) + if (vt->type == V4L2_TUNER_ANALOG_TV) vt->capability |= V4L2_TUNER_CAP_NORM; - if (t->mode != V4L2_TUNER_RADIO) { + if (vt->type != V4L2_TUNER_RADIO) { vt->rangelow = tv_range[0] * 16; vt->rangehigh = tv_range[1] * 16; return 0; } /* radio mode */ - vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - if (fe_tuner_ops->get_status) { - u32 tuner_status; - - fe_tuner_ops->get_status(&t->fe, &tuner_status); - vt->rxsubchans = - (tuner_status & TUNER_STATUS_STEREO) ? - V4L2_TUNER_SUB_STEREO : - V4L2_TUNER_SUB_MONO; + if (vt->type == t->mode) { + vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + if (fe_tuner_ops->get_status) { + u32 tuner_status; + + fe_tuner_ops->get_status(&t->fe, &tuner_status); + vt->rxsubchans = + (tuner_status & TUNER_STATUS_STEREO) ? + V4L2_TUNER_SUB_STEREO : + V4L2_TUNER_SUB_MONO; + } + if (analog_ops->has_signal) + vt->signal = analog_ops->has_signal(&t->fe); + vt->audmode = t->audmode; } - if (analog_ops->has_signal) - vt->signal = analog_ops->has_signal(&t->fe); vt->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; - vt->audmode = t->audmode; vt->rangelow = radio_range[0] * 16000; vt->rangehigh = radio_range[1] * 16000; -- cgit v0.10.2 From c902ce1bfb40d8b049bd2319b388b4b68b04bc27 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 7 Jul 2011 12:19:48 +0100 Subject: FS-Cache: Add a helper to bulk uncache pages on an inode Add an FS-Cache helper to bulk uncache pages on an inode. This will only work for the circumstance where the pages in the cache correspond 1:1 with the pages attached to an inode's page cache. This is required for CIFS and NFS: When disabling inode cookie, we were returning the cookie and setting cifsi->fscache to NULL but failed to invalidate any previously mapped pages. This resulted in "Bad page state" errors and manifested in other kind of errors when running fsstress. Fix it by uncaching mapped pages when we disable the inode cookie. This patch should fix the following oops and "Bad page state" errors seen during fsstress testing. ------------[ cut here ]------------ kernel BUG at fs/cachefiles/namei.c:201! invalid opcode: 0000 [#1] SMP Pid: 5, comm: kworker/u:0 Not tainted 2.6.38.7-30.fc15.x86_64 #1 Bochs Bochs RIP: 0010: cachefiles_walk_to_object+0x436/0x745 [cachefiles] RSP: 0018:ffff88002ce6dd00 EFLAGS: 00010282 RAX: ffff88002ef165f0 RBX: ffff88001811f500 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000282 RBP: ffff88002ce6dda0 R08: 0000000000000100 R09: ffffffff81b3a300 R10: 0000ffff00066c0a R11: 0000000000000003 R12: ffff88002ae54840 R13: ffff88002ae54840 R14: ffff880029c29c00 R15: ffff88001811f4b0 FS: 00007f394dd32720(0000) GS:ffff88002ef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fffcb62ddf8 CR3: 000000001825f000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:0 (pid: 5, threadinfo ffff88002ce6c000, task ffff88002ce55cc0) Stack: 0000000000000246 ffff88002ce55cc0 ffff88002ce6dd58 ffff88001815dc00 ffff8800185246c0 ffff88001811f618 ffff880029c29d18 ffff88001811f380 ffff88002ce6dd50 ffffffff814757e4 ffff88002ce6dda0 ffffffff8106ac56 Call Trace: cachefiles_lookup_object+0x78/0xd4 [cachefiles] fscache_lookup_object+0x131/0x16d [fscache] fscache_object_work_func+0x1bc/0x669 [fscache] process_one_work+0x186/0x298 worker_thread+0xda/0x15d kthread+0x84/0x8c kernel_thread_helper+0x4/0x10 RIP cachefiles_walk_to_object+0x436/0x745 [cachefiles] ---[ end trace 1d481c9af1804caa ]--- I tested the uncaching by the following means: (1) Create a big file on my NFS server (104857600 bytes). (2) Read the file into the cache with md5sum on the NFS client. Look in /proc/fs/fscache/stats: Pages : mrk=25601 unc=0 (3) Open the file for read/write ("bash 5<>/warthog/bigfile"). Look in proc again: Pages : mrk=25601 unc=25601 Reported-by: Jeff Layton Signed-off-by: David Howells Reviewed-and-Tested-by: Suresh Jayaraman cc: stable@kernel.org Signed-off-by: Linus Torvalds diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt index a167ab8..7cc6bf2 100644 --- a/Documentation/filesystems/caching/netfs-api.txt +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -673,6 +673,22 @@ storage request to complete, or it may attempt to cancel the storage request - in which case the page will not be stored in the cache this time. +BULK INODE PAGE UNCACHE +----------------------- + +A convenience routine is provided to perform an uncache on all the pages +attached to an inode. This assumes that the pages on the inode correspond on a +1:1 basis with the pages in the cache. + + void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie, + struct inode *inode); + +This takes the netfs cookie that the pages were cached with and the inode that +the pages are attached to. This function will wait for pages to finish being +written to the cache and for the cache to finish with the page generally. No +error is returned. + + ========================== INDEX AND DATA FILE UPDATE ========================== diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c index 8166966..42e5363 100644 --- a/fs/cifs/fscache.c +++ b/fs/cifs/fscache.c @@ -92,6 +92,7 @@ static void cifs_fscache_disable_inode_cookie(struct inode *inode) if (cifsi->fscache) { cFYI(1, "%s: (0x%p)", __func__, cifsi->fscache); + fscache_uncache_all_inode_pages(cifsi->fscache, inode); fscache_relinquish_cookie(cifsi->fscache, 1); cifsi->fscache = NULL; } diff --git a/fs/fscache/page.c b/fs/fscache/page.c index a2a5d19..2f343b4 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -954,3 +954,47 @@ void fscache_mark_pages_cached(struct fscache_retrieval *op, pagevec_reinit(pagevec); } EXPORT_SYMBOL(fscache_mark_pages_cached); + +/* + * Uncache all the pages in an inode that are marked PG_fscache, assuming them + * to be associated with the given cookie. + */ +void __fscache_uncache_all_inode_pages(struct fscache_cookie *cookie, + struct inode *inode) +{ + struct address_space *mapping = inode->i_mapping; + struct pagevec pvec; + pgoff_t next; + int i; + + _enter("%p,%p", cookie, inode); + + if (!mapping || mapping->nrpages == 0) { + _leave(" [no pages]"); + return; + } + + pagevec_init(&pvec, 0); + next = 0; + while (next <= (loff_t)-1 && + pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE) + ) { + for (i = 0; i < pagevec_count(&pvec); i++) { + struct page *page = pvec.pages[i]; + pgoff_t page_index = page->index; + + ASSERTCMP(page_index, >=, next); + next = page_index + 1; + + if (PageFsCache(page)) { + __fscache_wait_on_page_write(cookie, page); + __fscache_uncache_page(cookie, page); + } + } + pagevec_release(&pvec); + cond_resched(); + } + + _leave(""); +} +EXPORT_SYMBOL(__fscache_uncache_all_inode_pages); diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c index ce153a6..419119c 100644 --- a/fs/nfs/fscache.c +++ b/fs/nfs/fscache.c @@ -259,12 +259,10 @@ static void nfs_fscache_disable_inode_cookie(struct inode *inode) dfprintk(FSCACHE, "NFS: nfsi 0x%p turning cache off\n", NFS_I(inode)); - /* Need to invalidate any mapped pages that were read in before - * turning off the cache. + /* Need to uncache any pages attached to this inode that + * fscache knows about before turning off the cache. */ - if (inode->i_mapping && inode->i_mapping->nrpages) - invalidate_inode_pages2(inode->i_mapping); - + fscache_uncache_all_inode_pages(NFS_I(inode)->fscache, inode); nfs_fscache_zap_inode_cookie(inode); } } diff --git a/include/linux/fscache.h b/include/linux/fscache.h index 7c4d72f..9ec20de 100644 --- a/include/linux/fscache.h +++ b/include/linux/fscache.h @@ -204,6 +204,8 @@ extern bool __fscache_check_page_write(struct fscache_cookie *, struct page *); extern void __fscache_wait_on_page_write(struct fscache_cookie *, struct page *); extern bool __fscache_maybe_release_page(struct fscache_cookie *, struct page *, gfp_t); +extern void __fscache_uncache_all_inode_pages(struct fscache_cookie *, + struct inode *); /** * fscache_register_netfs - Register a filesystem as desiring caching services @@ -643,4 +645,23 @@ bool fscache_maybe_release_page(struct fscache_cookie *cookie, return false; } +/** + * fscache_uncache_all_inode_pages - Uncache all an inode's pages + * @cookie: The cookie representing the inode's cache object. + * @inode: The inode to uncache pages from. + * + * Uncache all the pages in an inode that are marked PG_fscache, assuming them + * to be associated with the given cookie. + * + * This function may sleep. It will wait for pages that are being written out + * and will wait whilst the PG_fscache mark is removed by the cache. + */ +static inline +void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie, + struct inode *inode) +{ + if (fscache_cookie_valid(cookie)) + __fscache_uncache_all_inode_pages(cookie, inode); +} + #endif /* _LINUX_FSCACHE_H */ -- cgit v0.10.2 From ddc6ff31cc22720c46c1547a5310ea260a968ae9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 26 Jun 2011 06:16:03 -0300 Subject: [media] msp3400: fill in v4l2_tuner based on vt->type field The vt->type field determines how the msp3400 should fill in the tuner data, not whether the msp3400 is in radio mode or not. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index de5d481..c43c81f 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -480,12 +480,14 @@ static int msp_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) struct msp_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - if (state->radio) + if (vt->type != V4L2_TUNER_ANALOG_TV) return 0; - if (state->opmode == OPMODE_AUTOSELECT) - msp_detect_stereo(client); - vt->audmode = state->audmode; - vt->rxsubchans = state->rxsubchans; + if (!state->radio) { + if (state->opmode == OPMODE_AUTOSELECT) + msp_detect_stereo(client); + vt->rxsubchans = state->rxsubchans; + } + vt->audmode = state->audmode; vt->capability |= V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; return 0; -- cgit v0.10.2 From ca5c485f55d326d9a23e4badd05890148aa53f74 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 6 Jul 2011 17:03:45 -0400 Subject: USB: additional regression fix for device removal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit e534c5b831c8b8e9f5edee5c8a37753c808b80dc (USB: fix regression occurring during device removal) didn't go far enough. It failed to take into account that when a driver claims multiple interfaces, it may release them all at the same time. As a result, some interfaces can get released before they are unregistered, and we deadlock trying to acquire the bandwidth_mutex that we already own. This patch (asl478) handles this case by setting the "unregistering" flag on all the interfaces before removing any of them. Signed-off-by: Alan Stern Cc: stable Tested-by: Éric Piel Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index e0719b4..0b5ec23 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1147,6 +1147,14 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) * any drivers bound to them (a key side effect) */ if (dev->actconfig) { + /* + * FIXME: In order to avoid self-deadlock involving the + * bandwidth_mutex, we have to mark all the interfaces + * before unregistering any of them. + */ + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) + dev->actconfig->interface[i]->unregistering = 1; + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { struct usb_interface *interface; @@ -1156,7 +1164,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) continue; dev_dbg(&dev->dev, "unregistering interface %s\n", dev_name(&interface->dev)); - interface->unregistering = 1; remove_intf_ep_devs(interface); device_del(&interface->dev); } -- cgit v0.10.2 From 61da5fab5a9b129cf05b1fe4666c3e45b3103fd4 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 7 Jul 2011 11:10:57 -0700 Subject: drm/i915/dp: retry link status read 3 times on failure Especially after a hotplug or power status change, the sink may not reply immediately to a link status query. So retry 3 times per the spec to really make sure nothing is there. See section 9.1 of the 1.1a DisplayPort spec. Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 391b55f..86912bd 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1019,14 +1019,20 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) static bool intel_dp_get_link_status(struct intel_dp *intel_dp) { - int ret; + int ret, i; + + /* Must try AUX reads for this at least 3 times */ + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_read(intel_dp, + DP_LANE0_1_STATUS, + intel_dp->link_status, + DP_LINK_STATUS_SIZE); + if (ret == DP_LINK_STATUS_SIZE) + return true; + msleep(1); + } - ret = intel_dp_aux_native_read(intel_dp, - DP_LANE0_1_STATUS, - intel_dp->link_status, DP_LINK_STATUS_SIZE); - if (ret != DP_LINK_STATUS_SIZE) - return false; - return true; + return false; } static uint8_t -- cgit v0.10.2 From 7183dc2912510cf005fcc59239f8d153ef51d3f0 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 7 Jul 2011 11:10:58 -0700 Subject: drm/i915/dp: use DP DPCD defines when looking at DPCD values Makes it easier to search for DP related constants. Reviewed-by: Keith Packard Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 86912bd..fc51730 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -138,8 +138,8 @@ intel_dp_max_lane_count(struct intel_dp *intel_dp) { int max_lane_count = 4; - if (intel_dp->dpcd[0] >= 0x11) { - max_lane_count = intel_dp->dpcd[2] & 0x1f; + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { + max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; switch (max_lane_count) { case 1: case 2: case 4: break; @@ -153,7 +153,7 @@ intel_dp_max_lane_count(struct intel_dp *intel_dp) static int intel_dp_max_link_bw(struct intel_dp *intel_dp) { - int max_link_bw = intel_dp->dpcd[1]; + int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; switch (max_link_bw) { case DP_LINK_BW_1_62: @@ -774,7 +774,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, /* * Check for DPCD version > 1.1 and enhanced framing support */ - if (intel_dp->dpcd[0] >= 0x11 && (intel_dp->dpcd[2] & DP_ENHANCED_FRAME_CAP)) { + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; intel_dp->DP |= DP_ENHANCED_FRAMING; } @@ -1553,7 +1554,7 @@ ironlake_dp_detect(struct intel_dp *intel_dp) 0x000, intel_dp->dpcd, sizeof (intel_dp->dpcd)) == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[0] != 0) + if (intel_dp->dpcd[DP_DPCD_REV] != 0) status = connector_status_connected; } DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0], @@ -1592,7 +1593,7 @@ g4x_dp_detect(struct intel_dp *intel_dp) if (intel_dp_aux_native_read(intel_dp, 0x000, intel_dp->dpcd, sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd)) { - if (intel_dp->dpcd[0] != 0) + if (intel_dp->dpcd[DP_DPCD_REV] != 0) status = connector_status_connected; } @@ -1960,8 +1961,9 @@ intel_dp_init(struct drm_device *dev, int output_reg) sizeof(intel_dp->dpcd)); ironlake_edp_panel_vdd_off(intel_dp); if (ret == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[0] >= 0x11) - dev_priv->no_aux_handshake = intel_dp->dpcd[3] & + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) + dev_priv->no_aux_handshake = + intel_dp->dpcd[DP_MAX_DOWNSPREAD] & DP_NO_AUX_HANDSHAKE_LINK_TRAINING; } else { /* if this fails, presume the device is a ghost */ -- cgit v0.10.2 From 59cd09e1aea3ac6eb15b45e5d2261a63ecb1799c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 7 Jul 2011 11:10:59 -0700 Subject: drm/i915/dp: read more receiver capability bits on hotplug When a hotplug event is received, we need to check the receiver cap bits in case they've changed (as they might with a hub or chain config). Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index fc51730..a9a5051 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1522,6 +1522,8 @@ intel_dp_link_down(struct intel_dp *intel_dp) static void intel_dp_check_link_status(struct intel_dp *intel_dp) { + int ret; + if (!intel_dp->base.base.crtc) return; @@ -1530,6 +1532,15 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) return; } + /* Try to read receiver status if the link appears to be up */ + ret = intel_dp_aux_native_read(intel_dp, + 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)); + if (ret != sizeof(intel_dp->dpcd)) { + intel_dp_link_down(intel_dp); + return; + } + if (!intel_channel_eq_ok(intel_dp)) { intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); -- cgit v0.10.2 From 899526d9a73fda47516cf11ccb3467ad6702f568 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 7 Jul 2011 11:11:00 -0700 Subject: drm/i915/dp: try to read receiver capabilities 3 times when detecting If ->detect is called too soon after a hot plug event, the sink may not be ready yet. So try up to 3 times with 1ms sleeps in between tries to get the data (spec dictates that receivers must be ready to respond within 1ms and that sources should try 3 times). See section 9.1 of the 1.1a DisplayPort spec. Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index a9a5051..70075d9 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1551,6 +1551,7 @@ static enum drm_connector_status ironlake_dp_detect(struct intel_dp *intel_dp) { enum drm_connector_status status; + int ret, i; /* Can't disconnect eDP, but you can close the lid... */ if (is_edp(intel_dp)) { @@ -1561,12 +1562,16 @@ ironlake_dp_detect(struct intel_dp *intel_dp) } status = connector_status_disconnected; - if (intel_dp_aux_native_read(intel_dp, - 0x000, intel_dp->dpcd, - sizeof (intel_dp->dpcd)) - == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[DP_DPCD_REV] != 0) + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_read(intel_dp, + 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)); + if (ret == sizeof(intel_dp->dpcd) && + intel_dp->dpcd[DP_DPCD_REV] != 0) { status = connector_status_connected; + break; + } + msleep(1); } DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2], intel_dp->dpcd[3]); -- cgit v0.10.2 From 885a50147f00a8a80108904bf58a18af357717f3 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 7 Jul 2011 11:11:01 -0700 Subject: drm/i915/dp: remove DPMS mode tracking from DP We currently use this when a hot plug event is received, only checking the link status and re-training if we had previously configured a link. However if we want to preserve the DP configuration across both hot plug and DPMS events (which we do for userspace apps that don't respond to hot plug uevents), we need to unconditionally check the link and try to bring it up on hot plug. Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 70075d9..5f97c17 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -50,7 +50,6 @@ struct intel_dp { bool has_audio; int force_audio; uint32_t color_range; - int dpms_mode; uint8_t link_bw; uint8_t lane_count; uint8_t dpcd[4]; @@ -1010,7 +1009,6 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (is_edp(intel_dp)) ironlake_edp_backlight_on(dev); } - intel_dp->dpms_mode = mode; } /* @@ -1813,8 +1811,7 @@ intel_dp_hot_plug(struct intel_encoder *intel_encoder) { struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base); - if (intel_dp->dpms_mode == DRM_MODE_DPMS_ON) - intel_dp_check_link_status(intel_dp); + intel_dp_check_link_status(intel_dp); } /* Return which DP Port should be selected for Transcoder DP control */ @@ -1882,7 +1879,6 @@ intel_dp_init(struct drm_device *dev, int output_reg) return; intel_dp->output_reg = output_reg; - intel_dp->dpms_mode = -1; intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); if (!intel_connector) { -- cgit v0.10.2 From df0c237d124fb8d10b98f7b43d63d962eeed9355 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 7 Jul 2011 11:11:02 -0700 Subject: drm/i915/dp: consolidate AUX retry code When checking link status during a hot plug event or detecting sink presence, we need to retry 3 times per the spec (section 9.1 of the 1.1a DisplayPort spec). Consolidate the retry code into a native_aux_read_retry function for use by get_link_status and _detect. Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 5f97c17..bca48b0 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1012,21 +1012,23 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) } /* - * Fetch AUX CH registers 0x202 - 0x207 which contain - * link status information + * Native read with retry for link status and receiver capability reads for + * cases where the sink may still be asleep. */ static bool -intel_dp_get_link_status(struct intel_dp *intel_dp) +intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, + uint8_t *recv, int recv_bytes) { int ret, i; - /* Must try AUX reads for this at least 3 times */ + /* + * Sinks are *supposed* to come up within 1ms from an off state, + * but we're also supposed to retry 3 times per the spec. + */ for (i = 0; i < 3; i++) { - ret = intel_dp_aux_native_read(intel_dp, - DP_LANE0_1_STATUS, - intel_dp->link_status, - DP_LINK_STATUS_SIZE); - if (ret == DP_LINK_STATUS_SIZE) + ret = intel_dp_aux_native_read(intel_dp, address, recv, + recv_bytes); + if (ret == recv_bytes) return true; msleep(1); } @@ -1034,6 +1036,19 @@ intel_dp_get_link_status(struct intel_dp *intel_dp) return false; } +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static bool +intel_dp_get_link_status(struct intel_dp *intel_dp) +{ + return intel_dp_aux_native_read_retry(intel_dp, + DP_LANE0_1_STATUS, + intel_dp->link_status, + DP_LINK_STATUS_SIZE); +} + static uint8_t intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], int r) @@ -1549,7 +1564,7 @@ static enum drm_connector_status ironlake_dp_detect(struct intel_dp *intel_dp) { enum drm_connector_status status; - int ret, i; + bool ret; /* Can't disconnect eDP, but you can close the lid... */ if (is_edp(intel_dp)) { @@ -1560,17 +1575,11 @@ ironlake_dp_detect(struct intel_dp *intel_dp) } status = connector_status_disconnected; - for (i = 0; i < 3; i++) { - ret = intel_dp_aux_native_read(intel_dp, - 0x000, intel_dp->dpcd, - sizeof (intel_dp->dpcd)); - if (ret == sizeof(intel_dp->dpcd) && - intel_dp->dpcd[DP_DPCD_REV] != 0) { - status = connector_status_connected; - break; - } - msleep(1); - } + ret = intel_dp_aux_native_read_retry(intel_dp, + 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)); + if (ret && intel_dp->dpcd[DP_DPCD_REV] != 0) + status = connector_status_connected; DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2], intel_dp->dpcd[3]); return status; -- cgit v0.10.2 From c7ad381078ee1b5ce2ab5274bd5f12fee6e1e59a Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 7 Jul 2011 11:11:03 -0700 Subject: drm/i915/dp: manage sink power state if possible On sinks with a DPCD rev of 1.1 or greater, we can send sink power management commands to address 0x600 per section 5.1.5 of the DisplayPort 1.1a spec. Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index bca48b0..e2aced6 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -942,11 +942,44 @@ static void ironlake_edp_pll_off(struct drm_encoder *encoder) udelay(200); } +/* If the sink supports it, try to set the power state appropriately */ +static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) +{ + int ret, i; + + /* Should have a valid DPCD by this point */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (mode != DRM_MODE_DPMS_ON) { + ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER, + DP_SET_POWER_D3); + if (ret != 1) + DRM_DEBUG_DRIVER("failed to write sink power state\n"); + } else { + /* + * When turning on, we need to retry for 1ms to give the sink + * time to wake up. + */ + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_write_1(intel_dp, + DP_SET_POWER, + DP_SET_POWER_D0); + if (ret == 1) + break; + msleep(1); + } + } +} + static void intel_dp_prepare(struct drm_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); struct drm_device *dev = encoder->dev; + /* Wake up the sink first */ + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + if (is_edp(intel_dp)) { ironlake_edp_backlight_off(dev); ironlake_edp_panel_off(dev); @@ -990,6 +1023,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (mode != DRM_MODE_DPMS_ON) { if (is_edp(intel_dp)) ironlake_edp_backlight_off(dev); + intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); if (is_edp(intel_dp)) ironlake_edp_panel_off(dev); @@ -998,6 +1032,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) } else { if (is_edp(intel_dp)) ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, mode); if (!(dp_reg & DP_PORT_EN)) { intel_dp_start_link_train(intel_dp); if (is_edp(intel_dp)) { -- cgit v0.10.2 From f8d9605243280f1870dd2c6c37a735b925c15f3c Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Thu, 7 Jul 2011 00:28:35 +0000 Subject: sctp: Enforce retransmission limit during shutdown When initiating a graceful shutdown while having data chunks on the retransmission queue with a peer which is in zero window mode the shutdown is never completed because the retransmission error count is reset periodically by the following two rules: - Do not timeout association while doing zero window probe. - Reset overall error count when a heartbeat request has been acknowledged. The graceful shutdown will wait for all outstanding TSN to be acknowledged before sending the SHUTDOWN request. This never happens due to the peer's zero window not acknowledging the continuously retransmitted data chunks. Although the error counter is incremented for each failed retransmission, the receiving of the SACK announcing the zero window clears the error count again immediately. Also heartbeat requests continue to be sent periodically. The peer acknowledges these requests causing the error counter to be reset as well. This patch changes behaviour to only reset the overall error counter for the above rules while not in shutdown. After reaching the maximum number of retransmission attempts, the T5 shutdown guard timer is scheduled to give the receiver some additional time to recover. The timer is stopped as soon as the receiver acknowledges any data. The issue can be easily reproduced by establishing a sctp association over the loopback device, constantly queueing data at the sender while not reading any at the receiver. Wait for the window to reach zero, then initiate a shutdown by killing both processes simultaneously. The association will never be freed and the chunks on the retransmission queue will be retransmitted indefinitely. Signed-off-by: Thomas Graf Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h index dd6847e..6506458 100644 --- a/include/net/sctp/command.h +++ b/include/net/sctp/command.h @@ -63,6 +63,7 @@ typedef enum { SCTP_CMD_ECN_ECNE, /* Do delayed ECNE processing. */ SCTP_CMD_ECN_CWR, /* Do delayed CWR processing. */ SCTP_CMD_TIMER_START, /* Start a timer. */ + SCTP_CMD_TIMER_START_ONCE, /* Start a timer once */ SCTP_CMD_TIMER_RESTART, /* Restart a timer. */ SCTP_CMD_TIMER_STOP, /* Stop a timer. */ SCTP_CMD_INIT_CHOOSE_TRANSPORT, /* Choose transport for an INIT. */ diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 1c88c89..d036821 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -1582,6 +1582,8 @@ static void sctp_check_transmitted(struct sctp_outq *q, #endif /* SCTP_DEBUG */ if (transport) { if (bytes_acked) { + struct sctp_association *asoc = transport->asoc; + /* We may have counted DATA that was migrated * to this transport due to DEL-IP operation. * Subtract those bytes, since the were never @@ -1600,6 +1602,17 @@ static void sctp_check_transmitted(struct sctp_outq *q, transport->error_count = 0; transport->asoc->overall_error_count = 0; + /* + * While in SHUTDOWN PENDING, we may have started + * the T5 shutdown guard timer after reaching the + * retransmission limit. Stop that timer as soon + * as the receiver acknowledged any data. + */ + if (asoc->state == SCTP_STATE_SHUTDOWN_PENDING && + del_timer(&asoc->timers + [SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD])) + sctp_association_put(asoc); + /* Mark the destination transport address as * active if it is not so marked. */ @@ -1629,10 +1642,15 @@ static void sctp_check_transmitted(struct sctp_outq *q, * A sender is doing zero window probing when the * receiver's advertised window is zero, and there is * only one data chunk in flight to the receiver. + * + * Allow the association to timeout while in SHUTDOWN + * PENDING or SHUTDOWN RECEIVED in case the receiver + * stays in zero window mode forever. */ if (!q->asoc->peer.rwnd && !list_empty(&tlist) && - (sack_ctsn+2 == q->asoc->next_tsn)) { + (sack_ctsn+2 == q->asoc->next_tsn) && + q->asoc->state < SCTP_STATE_SHUTDOWN_PENDING) { SCTP_DEBUG_PRINTK("%s: SACK received for zero " "window probe: %u\n", __func__, sack_ctsn); diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 534c2e5..6e0f882 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -670,10 +670,19 @@ static void sctp_cmd_transport_on(sctp_cmd_seq_t *cmds, /* 8.3 Upon the receipt of the HEARTBEAT ACK, the sender of the * HEARTBEAT should clear the error counter of the destination * transport address to which the HEARTBEAT was sent. - * The association's overall error count is also cleared. */ t->error_count = 0; - t->asoc->overall_error_count = 0; + + /* + * Although RFC4960 specifies that the overall error count must + * be cleared when a HEARTBEAT ACK is received, we make an + * exception while in SHUTDOWN PENDING. If the peer keeps its + * window shut forever, we may never be able to transmit our + * outstanding data and rely on the retransmission limit be reached + * to shutdown the association. + */ + if (t->asoc->state != SCTP_STATE_SHUTDOWN_PENDING) + t->asoc->overall_error_count = 0; /* Clear the hb_sent flag to signal that we had a good * acknowledgement. @@ -1437,6 +1446,13 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, sctp_cmd_setup_t2(commands, asoc, cmd->obj.ptr); break; + case SCTP_CMD_TIMER_START_ONCE: + timer = &asoc->timers[cmd->obj.to]; + + if (timer_pending(timer)) + break; + /* fall through */ + case SCTP_CMD_TIMER_START: timer = &asoc->timers[cmd->obj.to]; timeout = asoc->timeouts[cmd->obj.to]; diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index a297283..2461171 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -5154,7 +5154,7 @@ sctp_disposition_t sctp_sf_do_9_2_start_shutdown( * The sender of the SHUTDOWN MAY also start an overall guard timer * 'T5-shutdown-guard' to bound the overall time for shutdown sequence. */ - sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_START, + sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, SCTP_TO(SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD)); if (asoc->autoclose) @@ -5299,14 +5299,28 @@ sctp_disposition_t sctp_sf_do_6_3_3_rtx(const struct sctp_endpoint *ep, SCTP_INC_STATS(SCTP_MIB_T3_RTX_EXPIREDS); if (asoc->overall_error_count >= asoc->max_retrans) { - sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, - SCTP_ERROR(ETIMEDOUT)); - /* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */ - sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, - SCTP_PERR(SCTP_ERROR_NO_ERROR)); - SCTP_INC_STATS(SCTP_MIB_ABORTEDS); - SCTP_DEC_STATS(SCTP_MIB_CURRESTAB); - return SCTP_DISPOSITION_DELETE_TCB; + if (asoc->state == SCTP_STATE_SHUTDOWN_PENDING) { + /* + * We are here likely because the receiver had its rwnd + * closed for a while and we have not been able to + * transmit the locally queued data within the maximum + * retransmission attempts limit. Start the T5 + * shutdown guard timer to give the receiver one last + * chance and some additional time to recover before + * aborting. + */ + sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_START_ONCE, + SCTP_TO(SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD)); + } else { + sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, + SCTP_ERROR(ETIMEDOUT)); + /* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */ + sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, + SCTP_PERR(SCTP_ERROR_NO_ERROR)); + SCTP_INC_STATS(SCTP_MIB_ABORTEDS); + SCTP_DEC_STATS(SCTP_MIB_CURRESTAB); + return SCTP_DISPOSITION_DELETE_TCB; + } } /* E1) For the destination address for which the timer diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c index 0338dc6..7c211a7 100644 --- a/net/sctp/sm_statetable.c +++ b/net/sctp/sm_statetable.c @@ -827,7 +827,7 @@ static const sctp_sm_table_entry_t other_event_table[SCTP_NUM_OTHER_TYPES][SCTP_ /* SCTP_STATE_ESTABLISHED */ \ TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \ /* SCTP_STATE_SHUTDOWN_PENDING */ \ - TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \ + TYPE_SCTP_FUNC(sctp_sf_t5_timer_expire), \ /* SCTP_STATE_SHUTDOWN_SENT */ \ TYPE_SCTP_FUNC(sctp_sf_t5_timer_expire), \ /* SCTP_STATE_SHUTDOWN_RECEIVED */ \ -- cgit v0.10.2 From c1f2d9991046769aa14a904ea2bf5434daf86262 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 5 Jul 2011 23:59:56 +0100 Subject: ARM: ensure tag tables are const Nothing should ever modify a tag table entry, so mark these const. Acked-by: Nicolas Pitre Tested-by: Stephen Boyd Signed-off-by: Russell King diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee2ad8a..c3b5c79 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -187,7 +187,7 @@ struct tagtable { #define __tag __used __attribute__((__section__(".taglist.init"))) #define __tagtable(tag, fn) \ -static struct tagtable __tagtable_##fn __tag = { tag, fn } +static const struct tagtable __tagtable_##fn __tag = { tag, fn } /* * Memory map description -- cgit v0.10.2 From 3002b41bc6e5d66f7c1b5fd604f8f413e9bb37a5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 26 May 2011 11:40:54 +0100 Subject: ARM: decompressor: use better output sections Place read-only data in a .rodata output section, and the compressed piggy data in .piggydata. Place the .got.plt section before the .got section as is standard ELF practise. This allows the piggydata to be more easily extracted from the compressed vmlinux file for verification purposes. Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index ea80abe..4e72883 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -33,20 +33,24 @@ SECTIONS *(.text.*) *(.fixup) *(.gnu.warning) + *(.glue_7t) + *(.glue_7) + } + .rodata : { *(.rodata) *(.rodata.*) - *(.glue_7) - *(.glue_7t) + } + .piggydata : { *(.piggydata) - . = ALIGN(4); } + . = ALIGN(4); _etext = .; + .got.plt : { *(.got.plt) } _got_start = .; .got : { *(.got) } _got_end = .; - .got.plt : { *(.got.plt) } _edata = .; . = BSS_START; -- cgit v0.10.2 From 39df88872f64b8a7c438861460063eadf2ba9011 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 26 May 2011 11:25:33 +0100 Subject: ARM: vmlinux.lds: move discarded sections to beginning Rather than scattering the discarded sections throughout the linker file, move them to the start. Acked-by: Nicolas Pitre Tested-by: Stephen Boyd Signed-off-by: Russell King diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index e5287f2..cb46a9b 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -38,6 +38,28 @@ jiffies = jiffies_64 + 4; SECTIONS { + /* + * unwind exit sections must be discarded before the rest of the + * unwind sections get included. + */ + /DISCARD/ : { + *(.ARM.exidx.exit.text) + *(.ARM.extab.exit.text) + ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) + ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) +#ifndef CONFIG_HOTPLUG + *(.ARM.exidx.devexit.text) + *(.ARM.extab.devexit.text) +#endif +#ifndef CONFIG_MMU + *(.fixup) + *(__ex_table) +#endif +#ifndef CONFIG_SMP_ON_UP + *(.alt.smp.init) +#endif + } + #ifdef CONFIG_XIP_KERNEL . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); #else @@ -89,25 +111,6 @@ SECTIONS __init_end = .; #endif - /* - * unwind exit sections must be discarded before the rest of the - * unwind sections get included. - */ - /DISCARD/ : { - *(.ARM.exidx.exit.text) - *(.ARM.extab.exit.text) - ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) - ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) -#ifndef CONFIG_HOTPLUG - *(.ARM.exidx.devexit.text) - *(.ARM.extab.devexit.text) -#endif -#ifndef CONFIG_MMU - *(.fixup) - *(__ex_table) -#endif - } - .text : { /* Real text segment */ _text = .; /* Text and read-only data */ __exception_text_start = .; @@ -270,12 +273,6 @@ SECTIONS /* Default discards */ DISCARDS - -#ifndef CONFIG_SMP_ON_UP - /DISCARD/ : { - *(.alt.smp.init) - } -#endif } /* -- cgit v0.10.2 From 1604d79d372bcf0cf1aebcbdee251bd0f3d56665 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 5 Jul 2011 22:56:41 +0100 Subject: ARM: vmlinux.lds: rearrange .init output section Keep the various linker tables as separate output sections rather than combining them together into one big .init section. This makes the 'vmlinux' easier to see what is placed where. Acked-by: Nicolas Pitre Tested-by: Stephen Boyd Signed-off-by: Russell King diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index cb46a9b..c8bb9b7 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -65,48 +65,59 @@ SECTIONS #else . = PAGE_OFFSET + TEXT_OFFSET; #endif - - .init : { /* Init code and data */ + .head.text : { _stext = .; - _sinittext = .; - HEAD_TEXT - INIT_TEXT - ARM_EXIT_KEEP(EXIT_TEXT) - _einittext = .; + HEAD_TEXT + } + INIT_TEXT_SECTION(8) + .exit.text : { + ARM_EXIT_KEEP(EXIT_TEXT) + } + .init.proc.info : { ARM_CPU_DISCARD(PROC_INFO) + } + .init.arch.info : { __arch_info_begin = .; - *(.arch.info.init) + *(.arch.info.init) __arch_info_end = .; + } + .init.tagtable : { __tagtable_begin = .; - *(.taglist.init) + *(.taglist.init) __tagtable_end = .; + } #ifdef CONFIG_SMP_ON_UP + .init.smpalt : { __smpalt_begin = .; - *(.alt.smp.init) + *(.alt.smp.init) __smpalt_end = .; + } #endif - + .init.pv_table : { __pv_table_begin = .; - *(.pv_table) + *(.pv_table) __pv_table_end = .; - + } + .init.data : { +#ifndef CONFIG_XIP_KERNEL + INIT_DATA +#endif INIT_SETUP(16) - INIT_CALLS CON_INITCALL SECURITY_INITCALL INIT_RAM_FS - + } #ifndef CONFIG_XIP_KERNEL - __init_begin = _stext; - INIT_DATA + .exit.data : { ARM_EXIT_KEEP(EXIT_DATA) -#endif } +#endif PERCPU_SECTION(32) #ifndef CONFIG_XIP_KERNEL + __init_begin = _stext; . = ALIGN(PAGE_SIZE); __init_end = .; #endif -- cgit v0.10.2 From 43fc9d2fa5585adfadd0fdc06a20626727cf985a Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 6 Jul 2011 00:01:20 +0100 Subject: ARM: vmlinux.lds: remove .rodata/.rodata1 from main .text segment RODATA() already handles these sections, so allow it to take care of them for us. Acked-by: Nicolas Pitre Tested-by: Stephen Boyd Signed-off-by: Russell King diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index c8bb9b7..fa812d0 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -136,8 +136,6 @@ SECTIONS *(.fixup) #endif *(.gnu.warning) - *(.rodata) - *(.rodata.*) *(.glue_7) *(.glue_7t) . = ALIGN(4); -- cgit v0.10.2 From 3835d69a6c7048a28d0aea3cb8403d5e83a0f867 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 6 Jul 2011 10:39:34 +0100 Subject: ARM: vmlinux.lds: move init sections between text and data sections Place the init sections between the text and data sections. This means all code is grouped together at the beginning of the kernel image, and all data is at the end of the image. This avoids problems with the 24-bit branch instruction relocations becoming invalid with large initramfs images. Acked-by: Nicolas Pitre Tested-by: Stephen Boyd Signed-off-by: Russell King diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index fa812d0..18574b7 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -69,6 +69,53 @@ SECTIONS _stext = .; HEAD_TEXT } + .text : { /* Real text segment */ + _text = .; /* Text and read-only data */ + __exception_text_start = .; + *(.exception.text) + __exception_text_end = .; + IRQENTRY_TEXT + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT +#ifdef CONFIG_MMU + *(.fixup) +#endif + *(.gnu.warning) + *(.glue_7) + *(.glue_7t) + . = ALIGN(4); + *(.got) /* Global offset table */ + ARM_CPU_KEEP(PROC_INFO) + } + + RO_DATA(PAGE_SIZE) + +#ifdef CONFIG_ARM_UNWIND + /* + * Stack unwinding tables + */ + . = ALIGN(8); + .ARM.unwind_idx : { + __start_unwind_idx = .; + *(.ARM.exidx*) + __stop_unwind_idx = .; + } + .ARM.unwind_tab : { + __start_unwind_tab = .; + *(.ARM.extab*) + __stop_unwind_tab = .; + } +#endif + + _etext = .; /* End of text and rodata section */ + +#ifndef CONFIG_XIP_KERNEL + . = ALIGN(PAGE_SIZE); + __init_begin = .; +#endif + INIT_TEXT_SECTION(8) .exit.text : { ARM_EXIT_KEEP(EXIT_TEXT) @@ -116,58 +163,11 @@ SECTIONS PERCPU_SECTION(32) -#ifndef CONFIG_XIP_KERNEL - __init_begin = _stext; - . = ALIGN(PAGE_SIZE); - __init_end = .; -#endif - - .text : { /* Real text segment */ - _text = .; /* Text and read-only data */ - __exception_text_start = .; - *(.exception.text) - __exception_text_end = .; - IRQENTRY_TEXT - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT -#ifdef CONFIG_MMU - *(.fixup) -#endif - *(.gnu.warning) - *(.glue_7) - *(.glue_7t) - . = ALIGN(4); - *(.got) /* Global offset table */ - ARM_CPU_KEEP(PROC_INFO) - } - - RO_DATA(PAGE_SIZE) - -#ifdef CONFIG_ARM_UNWIND - /* - * Stack unwinding tables - */ - . = ALIGN(8); - .ARM.unwind_idx : { - __start_unwind_idx = .; - *(.ARM.exidx*) - __stop_unwind_idx = .; - } - .ARM.unwind_tab : { - __start_unwind_tab = .; - *(.ARM.extab*) - __stop_unwind_tab = .; - } -#endif - - _etext = .; /* End of text and rodata section */ - #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ . = PAGE_OFFSET + TEXT_OFFSET; #else + __init_end = .; . = ALIGN(THREAD_SIZE); __data_loc = .; #endif diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c19571c..b8e8912 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -639,8 +639,8 @@ void __init mem_init(void) " pkmap : 0x%08lx - 0x%08lx (%4ld MB)\n" #endif " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" - " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .text : 0x%p" " - 0x%p" " (%4d kB)\n" + " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .data : 0x%p" " - 0x%p" " (%4d kB)\n" " .bss : 0x%p" " - 0x%p" " (%4d kB)\n", @@ -662,8 +662,8 @@ void __init mem_init(void) #endif MLM(MODULES_VADDR, MODULES_END), - MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), + MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_sdata, _edata), MLK_ROUNDUP(__bss_start, __bss_stop)); -- cgit v0.10.2 From e2f81844efa2d44d326bef48e1c9e48926162bc6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 6 Jul 2011 10:53:22 +0100 Subject: ARM: vmlinux.lds: use _text and _stext the same way as x86 x86 uses _text to mark the start of the kernel image including the head text, and _stext to mark the start of the .text section. Change our vmlinux.lds to conform. An audit of the places which use _stext and _text in arch/arm indicates no users of either symbol are impacted by this change. It does mean a slight change to /proc/iomem output. Acked-by: Nicolas Pitre Tested-by: Stephen Boyd Signed-off-by: Russell King diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 18574b7..bf977f8 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -66,11 +66,11 @@ SECTIONS . = PAGE_OFFSET + TEXT_OFFSET; #endif .head.text : { - _stext = .; + _text = .; HEAD_TEXT } .text : { /* Real text segment */ - _text = .; /* Text and read-only data */ + _stext = .; /* Text and read-only data */ __exception_text_start = .; *(.exception.text) __exception_text_end = .; -- cgit v0.10.2 From 1083694ab052e5ba38a8f9a057c4745448977837 Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Thu, 7 Jul 2011 15:33:26 -0700 Subject: drm/i915: Enable GPU reset on Ivybridge. According to the hardware documentation, GDRST is exactly the same as on Sandybridge. So simply enable the existing code. Signed-off-by: Kenneth Graunke Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 013d304..58222e8 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -577,6 +577,7 @@ int i915_reset(struct drm_device *dev, u8 flags) if (get_seconds() - dev_priv->last_gpu_reset < 5) { DRM_ERROR("GPU hanging too fast, declaring wedged!\n"); } else switch (INTEL_INFO(dev)->gen) { + case 7: case 6: ret = gen6_do_reset(dev, flags); /* If reset with a user forcewake, try to restore */ -- cgit v0.10.2 From b55c59892e1f3b6c7d4b9ccffb4263e1486fb990 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 6 Jul 2011 19:58:23 -0400 Subject: SUNRPC: Fix a race between work-queue and rpc_killall_tasks Since rpc_killall_tasks may modify the rpc_task's tk_action field without any locking, we need to be careful when dereferencing it. Reported-by: Ben Greear Tested-by: Ben Greear Signed-off-by: Trond Myklebust Cc: stable@kernel.org diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index a27406b..4814e24 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -616,30 +616,25 @@ static void __rpc_execute(struct rpc_task *task) BUG_ON(RPC_IS_QUEUED(task)); for (;;) { + void (*do_action)(struct rpc_task *); /* - * Execute any pending callback. + * Execute any pending callback first. */ - if (task->tk_callback) { - void (*save_callback)(struct rpc_task *); - - /* - * We set tk_callback to NULL before calling it, - * in case it sets the tk_callback field itself: - */ - save_callback = task->tk_callback; - task->tk_callback = NULL; - save_callback(task); - } else { + do_action = task->tk_callback; + task->tk_callback = NULL; + if (do_action == NULL) { /* * Perform the next FSM step. - * tk_action may be NULL when the task has been killed - * by someone else. + * tk_action may be NULL if the task has been killed. + * In particular, note that rpc_killall_tasks may + * do this at any time, so beware when dereferencing. */ - if (task->tk_action == NULL) + do_action = task->tk_action; + if (do_action == NULL) break; - task->tk_action(task); } + do_action(task); /* * Lockless check for whether task is sleeping or not. -- cgit v0.10.2 From 04db79b015dafcb79371fda6b5c32ffdbd31a2ff Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 6 Jul 2011 08:10:38 -0400 Subject: cifs: factor smb_vol allocation out of cifs_setup_volume_info Signed-off-by: Jeff Layton Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index e11b831..3e29899 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -649,9 +649,9 @@ cifs_do_mount(struct file_system_type *fs_type, cFYI(1, "Devname: %s flags: %d ", dev_name, flags); - rc = cifs_setup_volume_info(&volume_info, (char *)data, dev_name); - if (rc) - return ERR_PTR(rc); + volume_info = cifs_get_volume_info((char *)data, dev_name); + if (IS_ERR(volume_info)) + return ERR_CAST(volume_info); cifs_sb = kzalloc(sizeof(struct cifs_sb_info), GFP_KERNEL); if (cifs_sb == NULL) { diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 53b1b13..8df28e9 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -155,8 +155,8 @@ extern void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, struct cifs_sb_info *cifs_sb); extern int cifs_match_super(struct super_block *, void *); extern void cifs_cleanup_volume_info(struct smb_vol *pvolume_info); -extern int cifs_setup_volume_info(struct smb_vol **pvolume_info, - char *mount_data, const char *devname); +extern struct smb_vol *cifs_get_volume_info(char *mount_data, + const char *devname); extern int cifs_mount(struct cifs_sb_info *, struct smb_vol *); extern void cifs_umount(struct cifs_sb_info *); extern void cifs_dfs_release_automount_timer(void); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index dd06407..46cc0ad 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2931,33 +2931,20 @@ expand_dfs_referral(int xid, struct cifs_ses *pSesInfo, } #endif -int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, - const char *devname) +static int +cifs_setup_volume_info(struct smb_vol *volume_info, char *mount_data, + const char *devname) { - struct smb_vol *volume_info; int rc = 0; - *pvolume_info = NULL; - - volume_info = kzalloc(sizeof(struct smb_vol), GFP_KERNEL); - if (!volume_info) { - rc = -ENOMEM; - goto out; - } - - if (cifs_parse_mount_options(mount_data, devname, - volume_info)) { - rc = -EINVAL; - goto out; - } + if (cifs_parse_mount_options(mount_data, devname, volume_info)) + return -EINVAL; if (volume_info->nullauth) { cFYI(1, "null user"); volume_info->username = kzalloc(1, GFP_KERNEL); - if (volume_info->username == NULL) { - rc = -ENOMEM; - goto out; - } + if (volume_info->username == NULL) + return -ENOMEM; } else if (volume_info->username) { /* BB fixme parse for domain name here */ cFYI(1, "Username: %s", volume_info->username); @@ -2965,8 +2952,7 @@ int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, cifserror("No username specified"); /* In userspace mount helper we can get user name from alternate locations such as env variables and files on disk */ - rc = -EINVAL; - goto out; + return -EINVAL; } /* this is needed for ASCII cp to Unicode converts */ @@ -2978,18 +2964,32 @@ int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, if (volume_info->local_nls == NULL) { cERROR(1, "CIFS mount error: iocharset %s not found", volume_info->iocharset); - rc = -ELIBACC; - goto out; + return -ELIBACC; } } - *pvolume_info = volume_info; - return rc; -out: - cifs_cleanup_volume_info(volume_info); return rc; } +struct smb_vol * +cifs_get_volume_info(char *mount_data, const char *devname) +{ + int rc; + struct smb_vol *volume_info; + + volume_info = kzalloc(sizeof(struct smb_vol), GFP_KERNEL); + if (!volume_info) + return ERR_PTR(-ENOMEM); + + rc = cifs_setup_volume_info(volume_info, mount_data, devname); + if (rc) { + cifs_cleanup_volume_info(volume_info); + volume_info = ERR_PTR(rc); + } + + return volume_info; +} + int cifs_mount(struct cifs_sb_info *cifs_sb, struct smb_vol *volume_info) { -- cgit v0.10.2 From 5838e9b8dada491278db48ff9162e25125fa89d6 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 8 Jul 2011 14:33:02 +0900 Subject: ARM: S3C24XX: don't use uninitialized variable in dma.c Commit 8970ef47 (S3C24XX: Remove hardware specific registers from DMA calls) removed the parameter dcon in s3c2410_dma_config() and calculates it on its own. So the debug-output for the old parameter can go, too. Fixes: arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_config': arch/arm/plat-s3c24xx/dma.c:1030:2: warning: 'dcon' is used uninitialized in this function Signed-off-by: Wolfram Sang Cc: Ben Dooks Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 2abf966..a5b3684 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1027,17 +1027,13 @@ int s3c2410_dma_config(unsigned int channel, struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned int dcon; - pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __func__, channel, xferunit, dcon); + pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit); if (chan == NULL) return -EINVAL; - pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); - dcon = chan->dcon & dma_sel.dcon_mask; - - pr_debug("%s: New dcon is %08x\n", __func__, dcon); + pr_debug("%s: dcon is %08x\n", __func__, dcon); switch (chan->req_ch) { case DMACH_I2S_IN: -- cgit v0.10.2 From cb26a7b1c18857d14913040b45f3fe51b513f936 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 8 Jul 2011 14:33:02 +0900 Subject: ARM: S3C24XX: drop return codes in void function of dma.c Commit bb072c3c (ARM / Samsung: Use struct syscore_ops for "core" power management) turned s3c2410_dma_resume_chan() from int to void. So, drop the actual return values, too. Fixes: arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_resume_chan': arch/arm/plat-s3c24xx/dma.c:1238:3: warning: 'return' with a value, in function returning void arch/arm/plat-s3c24xx/dma.c:1250:2: warning: 'return' with a value, in function returning void Signed-off-by: Wolfram Sang Acked-by: Rafael J. Wysocki Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index a5b3684..a79a8cc 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1231,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) /* restore channel's hardware configuration */ if (!cp->in_use) - return 0; + return; printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); @@ -1242,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) if (cp->map != NULL) dma_sel.select(cp, cp->map); - - return 0; } static void s3c2410_dma_resume(void) -- cgit v0.10.2 From d34c1fcddc3a159d52576c656f8caabc0cf4894b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 8 Jul 2011 18:16:56 +0900 Subject: ARM: S3C2440: fix section mismatch on mini2440 If mini2440_init() is in __init, mini2440_parse_features() should also be in __init. Fixes: (.text+0x9adc): Section mismatch in reference from the function mini2440_parse_features.clone.0() to the (unknown reference) .init.data:(unknown) The function mini2440_parse_features.clone.0() references the (unknown reference) __initdata (unknown). Signed-off-by: Wolfram Sang Cc: Michel Pollet Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dd3120d..fc2dc0b 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -552,7 +552,7 @@ struct mini2440_features_t { struct platform_device *optional[8]; }; -static void mini2440_parse_features( +static void __init mini2440_parse_features( struct mini2440_features_t * features, const char * features_str ) { -- cgit v0.10.2 From 54d525735140e930d87c5afd1b0b3393ffdac021 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 7 Jul 2011 18:43:36 +0100 Subject: ARM: 6996/1: mm: Poison freed init memory Poisoning __init marked memory can be useful when tracking down obscure memory corruption bugs. Therefore, poison init memory with 0xe7fddef0 to catch bugs earlier. The poison value is an undefined instruction in ARM mode and branch to an undefined instruction in Thumb mode. Signed-off-by: Stephen Boyd Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2c2cce9..fdc87f9 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -416,6 +416,17 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) return pages; } +/* + * Poison init memory with an undefined instruction (ARM) or a branch to an + * undefined instruction (Thumb). + */ +static inline void poison_init_mem(void *s, size_t count) +{ + u32 *p = (u32 *)s; + while ((count = count - 4)) + *p++ = 0xe7fddef0; +} + static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn) { @@ -696,11 +707,13 @@ void free_initmem(void) #ifdef CONFIG_HAVE_TCM extern char __tcm_start, __tcm_end; + poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start); totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)), __phys_to_pfn(__pa(&__tcm_end)), "TCM link"); #endif + poison_init_mem(__init_begin, __init_end - __init_begin); if (!machine_is_integrator() && !machine_is_cintegrator()) totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)), __phys_to_pfn(__pa(__init_end)), @@ -713,10 +726,12 @@ static int keep_initrd; void free_initrd_mem(unsigned long start, unsigned long end) { - if (!keep_initrd) + if (!keep_initrd) { + poison_init_mem((void *)start, PAGE_ALIGN(end) - start); totalram_pages += free_area(__phys_to_pfn(__pa(start)), __phys_to_pfn(__pa(end)), "initrd"); + } } static int __init keepinitrd_setup(char *__unused) -- cgit v0.10.2 From 3973c337759cd201773a0ecc7b6f39f1ea2a6287 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 8 Jul 2011 14:02:21 +0100 Subject: ARM: dmabounce: simplify dma_set_mask() Simplify the dmabounce specific code in dma_set_mask(). We can just omit setting the dma mask if dmabounce is enabled (we will have already set dma mask via callbacks when the device is created in that case.) Signed-off-by: Russell King diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 4ad2533..94662f4 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -133,18 +133,12 @@ static inline int dma_supported(struct device *dev, u64 mask) static inline int dma_set_mask(struct device *dev, u64 dma_mask) { -#ifdef CONFIG_DMABOUNCE - if (dev->archdata.dmabounce) { - if (dma_mask >= ISA_DMA_THRESHOLD) - return 0; - else - return -EIO; - } -#endif if (!dev->dma_mask || !dma_supported(dev, dma_mask)) return -EIO; +#ifndef CONFIG_DMABOUNCE *dev->dma_mask = dma_mask; +#endif return 0; } -- cgit v0.10.2 From 2345b20fd9160d99f7cdf34e7b028ea351bf9c25 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 8 Jul 2011 10:02:18 +0100 Subject: gpio/langwell_gpio: ack the correct bit for langwell gpio interrupts The wrong bit was masked when acking langwell gpio interrupts. Reason for maskig the wrong bit was probably because__ffs() and ffs() functions return bit indexes differently (0..31 vs 1..32) This fixes langwell based devices from hanging when a gpio interrupt is triggered and undoes the breakage which occurred in change set 732063b92bb727b27e61580ce278dddefe31c6ad Signed-off-by: Mathias Nyman Signed-off-by: Alan Cox Signed-off-by: Grant Likely diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c index bd6571e..644ba12 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/langwell_gpio.c @@ -223,7 +223,7 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) gedr = gpio_reg(&lnw->chip, base, GEDR); pending = readl(gedr); while (pending) { - gpio = __ffs(pending) - 1; + gpio = __ffs(pending); mask = BIT(gpio); pending &= ~mask; /* Clear before handling so we can't lose an edge */ -- cgit v0.10.2 From 8fcbc63701b01e913e6a13937f765fabf9c969c5 Mon Sep 17 00:00:00 2001 From: Tushar Gohad Date: Thu, 7 Jul 2011 15:38:52 +0000 Subject: XFRM: Fix memory leak in xfrm_state_update Upon "ip xfrm state update ..", xfrm_add_sa() takes an extra reference on the user-supplied SA and forgets to drop the reference when xfrm_state_update() returns 0. This leads to a memory leak as the parameter SA is never freed. This change attempts to fix the leak by calling __xfrm_state_put() when xfrm_state_update() updates a valid SA (err = 0). The parameter SA is added to the gc list when the final reference is dropped by xfrm_add_sa() upon completion. Signed-off-by: Tushar Gohad Acked-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index d70f85e..9414b9c 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1345,6 +1345,8 @@ out: xfrm_state_check_expire(x1); err = 0; + x->km.state = XFRM_STATE_DEAD; + __xfrm_state_put(x); } spin_unlock_bh(&x1->lock); -- cgit v0.10.2 From b1f524e36cb691d20bfdaee423977f1decb81cf6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 7 Jul 2011 23:01:28 +0000 Subject: net/natsemi: Fix module parameter permissions The third parameter of module_param is supposed to represent sysfs file permissions. A value of "1" leads to the following: $ ls -l /sys/module/natsemi/parameters/ total 0 ---------x 1 root root 4096 Jul 8 09:46 dspcfg_workaround I am changing it to "0" to align with the other module parameters in this driver. Signed-off-by: Jean Delvare Cc: Tim Hockin Cc: Mark Brown Signed-off-by: David S. Miller diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 8f8b65a..1f0a833 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -140,7 +140,7 @@ MODULE_LICENSE("GPL"); module_param(mtu, int, 0); module_param(debug, int, 0); module_param(rx_copybreak, int, 0); -module_param(dspcfg_workaround, int, 1); +module_param(dspcfg_workaround, int, 0); module_param_array(options, int, NULL, 0); module_param_array(full_duplex, int, NULL, 0); MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)"); -- cgit v0.10.2 From 5e2cd0825a43824827b233d95bc47c0c970e5bef Mon Sep 17 00:00:00 2001 From: Greg KH Date: Fri, 8 Jul 2011 03:45:25 +0000 Subject: hso: fix a use after free condition This needs to go to netdev: From: Octavian Purdila In hso_free_net_device hso_net pointer is freed and then used to cleanup urb pools. Catched with SLAB_DEBUG during S3 resume: [ 95.824442] Pid: 389, comm: khubd Tainted: G C 2.6.36greenridge-01400-g423cf13-dirty #154 Type2 - Board Product Name1/OakTrail [ 95.824442] EIP: 0060:[] EFLAGS: 00010202 CPU: 0 [ 95.824442] EIP is at kref_put+0x29/0x42 [ 95.824442] EAX: 6b6b6b6b EBX: 6b6b6b6b ECX: c2806b40 EDX: 00000037 [ 95.824442] ESI: c1258d56 EDI: edd3d128 EBP: ee8cde0c ESP: ee8cde04 [ 95.824442] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 95.824442] Process khubd (pid: 389, ti=ee8cc000 task=ee95ed10 task.ti=ee8cc000) [ 95.824442] Stack: [ 95.824442] edd07020 00000000 ee8cde14 c1258b77 ee8cde38 ef933a44 ef93572b ef935dec [ 95.824442] <0> 0000099a 6b6b6b6b 00000000 ee2da748 edd3e0c0 ee8cde54 ef933b9f ee3b53f8 [ 95.824442] <0> 00000002 ee2da748 ee2da764 ef936658 ee8cde60 ef933d0c ee2da748 ee8cde84 [ 95.824442] Call Trace: [ 95.824442] [] ? usb_free_urb+0x11/0x13 [ 95.824442] [] ? hso_free_net_device+0x81/0xd8 [hso] [ 95.824442] [] ? hso_free_interface+0x104/0x111 [hso] [ 95.824442] [] ? hso_disconnect+0xb/0x18 [hso] [ 95.824442] [] ? usb_unbind_interface+0x44/0x14a [ 95.824442] [] ? __device_release_driver+0x6f/0xb1 [ 95.824442] [] ? device_release_driver+0x18/0x23 [ 95.824442] [] ? bus_remove_device+0x8a/0xa1 [ 95.824442] [] ? device_del+0x129/0x163 [ 95.824442] [] ? put_device+0xf/0x11 [ 95.824442] [] ? device_unregister+0x12/0x15 [ 95.824442] [] ? usb_disable_device+0x90/0xf0 [ 95.824442] [] ? usb_disconnect+0x6d/0xf8 [ 95.824442] [] ? hub_thread+0x3fc/0xc57 [ 95.824442] [] ? autoremove_wake_function+0x0/0x2f [ 95.824442] [] ? complete+0x34/0x3e [ 95.824442] [] ? hub_thread+0x0/0xc57 [ 95.824442] [] ? kthread+0x63/0x68 [ 95.824442] [] ? kthread+0x0/0x68 [ 95.824442] [] ? kernel_thread_helper+0x6/0x10 Signed-off-by: Octavian Purdila Signed-off-by: Alan Cox Signed-off-by: David S. Miller diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 387ca43..304fe78 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2421,10 +2421,8 @@ static void hso_free_net_device(struct hso_device *hso_dev) remove_net_device(hso_net->parent); - if (hso_net->net) { + if (hso_net->net) unregister_netdev(hso_net->net); - free_netdev(hso_net->net); - } /* start freeing */ for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) { @@ -2436,6 +2434,9 @@ static void hso_free_net_device(struct hso_device *hso_dev) kfree(hso_net->mux_bulk_tx_buf); hso_net->mux_bulk_tx_buf = NULL; + if (hso_net->net) + free_netdev(hso_net->net); + kfree(hso_dev); } -- cgit v0.10.2 From 06b8fc5d308b15e853a68c3d4854fb2ac33db867 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 8 Jul 2011 09:31:31 -0700 Subject: net: Fix default in docs for tcp_orphan_retries. Default should be listed at 8 instead of 7. Reported-by: Denys Fedoryshchenko Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index d3d653a..bfe9242 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -346,7 +346,7 @@ tcp_orphan_retries - INTEGER when RTO retransmissions remain unacknowledged. See tcp_retries2 for more details. - The default value is 7. + The default value is 8. If your machine is a loaded WEB server, you should think about lowering this value, such sockets may consume significant resources. Cf. tcp_max_orphans. -- cgit v0.10.2 From cd4fcc704f30f2064ab30b5300d44d431e46db50 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Fri, 8 Jul 2011 04:37:46 +0000 Subject: sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket Trigger user ABORT if application closes a socket which has data queued on the socket receive queue or chunks waiting on the reassembly or ordering queue as this would imply data being lost which defeats the point of a graceful shutdown. This behavior is already practiced in TCP. We do not check the input queue because that would mean to parse all chunks on it to look for unacknowledged data which seems too much of an effort. Control chunks or duplicated chunks may also be in the input queue and should not be stopping a graceful shutdown. Signed-off-by: Thomas Graf Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h index 99b027b..ca4693b 100644 --- a/include/net/sctp/ulpevent.h +++ b/include/net/sctp/ulpevent.h @@ -80,7 +80,7 @@ static inline struct sctp_ulpevent *sctp_skb2event(struct sk_buff *skb) void sctp_ulpevent_free(struct sctp_ulpevent *); int sctp_ulpevent_is_notification(const struct sctp_ulpevent *); -void sctp_queue_purge_ulpevents(struct sk_buff_head *list); +unsigned int sctp_queue_purge_ulpevents(struct sk_buff_head *list); struct sctp_ulpevent *sctp_ulpevent_make_assoc_change( const struct sctp_association *asoc, diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 08c6238..d3ccf79 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1384,6 +1384,7 @@ SCTP_STATIC void sctp_close(struct sock *sk, long timeout) struct sctp_endpoint *ep; struct sctp_association *asoc; struct list_head *pos, *temp; + unsigned int data_was_unread; SCTP_DEBUG_PRINTK("sctp_close(sk: 0x%p, timeout:%ld)\n", sk, timeout); @@ -1393,6 +1394,10 @@ SCTP_STATIC void sctp_close(struct sock *sk, long timeout) ep = sctp_sk(sk)->ep; + /* Clean up any skbs sitting on the receive queue. */ + data_was_unread = sctp_queue_purge_ulpevents(&sk->sk_receive_queue); + data_was_unread += sctp_queue_purge_ulpevents(&sctp_sk(sk)->pd_lobby); + /* Walk all associations on an endpoint. */ list_for_each_safe(pos, temp, &ep->asocs) { asoc = list_entry(pos, struct sctp_association, asocs); @@ -1410,7 +1415,9 @@ SCTP_STATIC void sctp_close(struct sock *sk, long timeout) } } - if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime) { + if (data_was_unread || !skb_queue_empty(&asoc->ulpq.lobby) || + !skb_queue_empty(&asoc->ulpq.reasm) || + (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime)) { struct sctp_chunk *chunk; chunk = sctp_make_abort_user(asoc, NULL, 0); @@ -1420,10 +1427,6 @@ SCTP_STATIC void sctp_close(struct sock *sk, long timeout) sctp_primitive_SHUTDOWN(asoc, NULL); } - /* Clean up any skbs sitting on the receive queue. */ - sctp_queue_purge_ulpevents(&sk->sk_receive_queue); - sctp_queue_purge_ulpevents(&sctp_sk(sk)->pd_lobby); - /* On a TCP-style socket, block for at most linger_time if set. */ if (sctp_style(sk, TCP) && timeout) sctp_wait_for_close(sk, timeout); diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index e70e5fc..8a84017 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -1081,9 +1081,19 @@ void sctp_ulpevent_free(struct sctp_ulpevent *event) } /* Purge the skb lists holding ulpevents. */ -void sctp_queue_purge_ulpevents(struct sk_buff_head *list) +unsigned int sctp_queue_purge_ulpevents(struct sk_buff_head *list) { struct sk_buff *skb; - while ((skb = skb_dequeue(list)) != NULL) - sctp_ulpevent_free(sctp_skb2event(skb)); + unsigned int data_unread = 0; + + while ((skb = skb_dequeue(list)) != NULL) { + struct sctp_ulpevent *event = sctp_skb2event(skb); + + if (!sctp_ulpevent_is_notification(event)) + data_unread += skb->len; + + sctp_ulpevent_free(event); + } + + return data_unread; } -- cgit v0.10.2 From b7eff394670366a42935bfbaef67a6f7185627d7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 8 Jul 2011 11:44:56 -0400 Subject: drm/radeon/kms: clean up multiple crtc handling for evergreen+ (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit evergreen+ asics have 2-6 crtcs. Don't access crtc registers for crtc regs that don't exist as they have very high latency and may cause problems on some asics. The previous code missed a few cases and was not fine grained enough (missed the 4 crtc case for example). Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=38800 v2: fix typo noticed by Chris Bandy Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Tested-by: Simon Farnsworth Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index a2d9008..660f964 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -985,17 +985,19 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav { save->vga_control[0] = RREG32(D1VGA_CONTROL); save->vga_control[1] = RREG32(D2VGA_CONTROL); - save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL); - save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL); - save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL); - save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL); save->vga_render_control = RREG32(VGA_RENDER_CONTROL); save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); save->crtc_control[0] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET); save->crtc_control[1] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { + save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL); + save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL); save->crtc_control[2] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET); save->crtc_control[3] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL); + save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL); save->crtc_control[4] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET); save->crtc_control[5] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); } @@ -1004,35 +1006,45 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav WREG32(VGA_RENDER_CONTROL, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1); } WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(D1VGA_CONTROL, 0); WREG32(D2VGA_CONTROL, 0); - WREG32(EVERGREEN_D3VGA_CONTROL, 0); - WREG32(EVERGREEN_D4VGA_CONTROL, 0); - WREG32(EVERGREEN_D5VGA_CONTROL, 0); - WREG32(EVERGREEN_D6VGA_CONTROL, 0); + if (rdev->num_crtc >= 4) { + WREG32(EVERGREEN_D3VGA_CONTROL, 0); + WREG32(EVERGREEN_D4VGA_CONTROL, 0); + } + if (rdev->num_crtc >= 6) { + WREG32(EVERGREEN_D5VGA_CONTROL, 0); + WREG32(EVERGREEN_D6VGA_CONTROL, 0); + } } void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save) @@ -1055,7 +1067,7 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC1_REGISTER_OFFSET, (u32)rdev->mc.vram_start); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET, upper_32_bits(rdev->mc.vram_start)); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET, @@ -1073,7 +1085,8 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s (u32)rdev->mc.vram_start); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC3_REGISTER_OFFSET, (u32)rdev->mc.vram_start); - + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET, upper_32_bits(rdev->mc.vram_start)); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET, @@ -1101,31 +1114,41 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s /* Restore video state */ WREG32(D1VGA_CONTROL, save->vga_control[0]); WREG32(D2VGA_CONTROL, save->vga_control[1]); - WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]); - WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]); - WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]); - WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]); + if (rdev->num_crtc >= 4) { + WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]); + WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]); + } + if (rdev->num_crtc >= 6) { + WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]); + WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]); + } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1); } WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, save->crtc_control[0]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, save->crtc_control[1]); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, save->crtc_control[2]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, save->crtc_control[3]); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, save->crtc_control[4]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, save->crtc_control[5]); } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } @@ -2417,18 +2440,22 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev) WREG32(GRBM_INT_CNTL, 0); WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } @@ -2547,19 +2574,25 @@ int evergreen_irq_set(struct radeon_device *rdev) WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4); + } + if (rdev->num_crtc >= 6) { WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, crtc5); WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6); } WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); + if (rdev->num_crtc >= 4) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); + } + if (rdev->num_crtc >= 6) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); + } WREG32(DC_HPD1_INT_CONTROL, hpd1); WREG32(DC_HPD2_INT_CONTROL, hpd2); @@ -2583,53 +2616,57 @@ static inline void evergreen_irq_ack(struct radeon_device *rdev) rdev->irq.stat_regs.evergreen.disp_int_cont5 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE5); rdev->irq.stat_regs.evergreen.d1grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET); rdev->irq.stat_regs.evergreen.d2grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET); + if (rdev->num_crtc >= 4) { + rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET); + rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET); + rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET); + } if (rdev->irq.stat_regs.evergreen.d1grph_int & GRPH_PFLIP_INT_OCCURRED) WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); if (rdev->irq.stat_regs.evergreen.d2grph_int & GRPH_PFLIP_INT_OCCURRED) WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VBLANK_INTERRUPT) WREG32(VBLANK_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VLINE_INTERRUPT) WREG32(VLINE_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VLINE_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VBLANK_INTERRUPT) WREG32(VBLANK_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VLINE_INTERRUPT) WREG32(VLINE_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VLINE_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK); + if (rdev->num_crtc >= 4) { + if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK); + } + + if (rdev->num_crtc >= 6) { + if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK); + } if (rdev->irq.stat_regs.evergreen.disp_int & DC_HPD1_INTERRUPT) { tmp = RREG32(DC_HPD1_INT_CONTROL); -- cgit v0.10.2 From e2cf3137aaa23faf2b8c1335671f1a0a0d90aab5 Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Wed, 15 Jun 2011 17:54:12 +0900 Subject: regulator: max8952 - fix wrong gpio valid check Signed-off-by: Jonghwan Choi Acked-by: MyungJoo Ham Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index daff7fd..486ed81 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -139,7 +139,7 @@ static int max8952_set_voltage(struct regulator_dev *rdev, s8 vid = -1, i; if (!gpio_is_valid(max8952->pdata->gpio_vid0) || - !gpio_is_valid(max8952->pdata->gpio_vid0)) { + !gpio_is_valid(max8952->pdata->gpio_vid1)) { /* DVS not supported */ return -EPERM; } -- cgit v0.10.2 From dbb48e7c3db4871803fc990864e37917e413ccb2 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 21 Jun 2011 09:08:59 +0530 Subject: regulator: MAX8997: Fix for divide by zero error Currently, ramp_delay variable is used uninitialzed in max8997_set_voltage_ldobuck which gets called through regulator_register calls. To fix the problem, in max8997_pmic_probe, ramp_delay initialization code is moved before calls to regulator_register. Cc: Liam Girdwood Cc: Mark Brown Cc: MyungJoo Ham Cc: Kyungmin Park Cc: Samuel Ortiz Signed-off-by: Tushar Behera Acked-by: MyungJoo Ham Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 10d5a1d..0fc7b8c 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -1124,6 +1124,10 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) 0x3f); } + /* Misc Settings */ + max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ + max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); + for (i = 0; i < pdata->num_regulators; i++) { const struct voltage_map_desc *desc; int id = pdata->regulators[i].id; @@ -1148,10 +1152,6 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) } } - /* Misc Settings */ - max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ - max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); - return 0; err: for (i = 0; i < max8997->num_regulators; i++) -- cgit v0.10.2 From 6e0414a5c89c708efe67f828f3a9c12293ce326e Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Mon, 20 Jun 2011 17:30:17 +0900 Subject: regulator: max8997: remove dependency on platform_data pointer The platform_data (pdata) may be pointing to __initdata section, which may be free'd from the memory. The dependency on pdata in non-init functions is removed in this patch to allow platform to declare __initdata for platform data. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 0fc7b8c..f8940c6 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -39,25 +39,28 @@ struct max8997_data { struct regulator_dev **rdev; int ramp_delay; /* in mV/us */ + bool buck1_gpiodvs; + bool buck2_gpiodvs; + bool buck5_gpiodvs; u8 buck1_vol[8]; u8 buck2_vol[8]; u8 buck5_vol[8]; + int buck125_gpios[3]; int buck125_gpioindex; + bool ignore_gpiodvs_side_effect; u8 saved_states[MAX8997_REG_MAX]; }; static inline void max8997_set_gpio(struct max8997_data *max8997) { - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int set3 = (max8997->buck125_gpioindex) & 0x1; int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1; int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1; - gpio_set_value(pdata->buck125_gpios[0], set1); - gpio_set_value(pdata->buck125_gpios[1], set2); - gpio_set_value(pdata->buck125_gpios[2], set3); + gpio_set_value(max8997->buck125_gpios[0], set1); + gpio_set_value(max8997->buck125_gpios[1], set2); + gpio_set_value(max8997->buck125_gpios[2], set3); } struct voltage_map_desc { @@ -380,8 +383,6 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev, static int max8997_get_voltage(struct regulator_dev *rdev) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); struct i2c_client *i2c = max8997->iodev->i2c; int reg, shift, mask, ret; int rid = max8997_get_rid(rdev); @@ -391,9 +392,9 @@ static int max8997_get_voltage(struct regulator_dev *rdev) if (ret) return ret; - if ((rid == MAX8997_BUCK1 && pdata->buck1_gpiodvs) || - (rid == MAX8997_BUCK2 && pdata->buck2_gpiodvs) || - (rid == MAX8997_BUCK5 && pdata->buck5_gpiodvs)) + if ((rid == MAX8997_BUCK1 && max8997->buck1_gpiodvs) || + (rid == MAX8997_BUCK2 && max8997->buck2_gpiodvs) || + (rid == MAX8997_BUCK5 && max8997->buck5_gpiodvs)) reg += max8997->buck125_gpioindex; ret = max8997_read_reg(i2c, reg, &val); @@ -561,8 +562,6 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev, u8 new_val, int *best) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int rid = max8997_get_rid(rdev); u8 *buckx_val[3]; bool buckx_gpiodvs[3]; @@ -589,9 +588,9 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev, buckx_val[0] = max8997->buck1_vol; buckx_val[1] = max8997->buck2_vol; buckx_val[2] = max8997->buck5_vol; - buckx_gpiodvs[0] = pdata->buck1_gpiodvs; - buckx_gpiodvs[1] = pdata->buck2_gpiodvs; - buckx_gpiodvs[2] = pdata->buck5_gpiodvs; + buckx_gpiodvs[0] = max8997->buck1_gpiodvs; + buckx_gpiodvs[1] = max8997->buck2_gpiodvs; + buckx_gpiodvs[2] = max8997->buck5_gpiodvs; for (i = 0; i < 8; i++) { int others; @@ -640,8 +639,6 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned *selector) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int rid = max8997_get_rid(rdev); const struct voltage_map_desc *desc; int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg; @@ -653,15 +650,15 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, switch (rid) { case MAX8997_BUCK1: - if (pdata->buck1_gpiodvs) + if (max8997->buck1_gpiodvs) gpio_dvs_mode = true; break; case MAX8997_BUCK2: - if (pdata->buck2_gpiodvs) + if (max8997->buck2_gpiodvs) gpio_dvs_mode = true; break; case MAX8997_BUCK5: - if (pdata->buck5_gpiodvs) + if (max8997->buck5_gpiodvs) gpio_dvs_mode = true; break; } @@ -695,7 +692,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, new_idx = tmp_idx; new_val = tmp_val; - if (pdata->ignore_gpiodvs_side_effect == false) + if (max8997->ignore_gpiodvs_side_effect == false) return -EINVAL; dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:" @@ -993,6 +990,11 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) i2c = max8997->iodev->i2c; max8997->buck125_gpioindex = pdata->buck125_default_idx; + max8997->buck1_gpiodvs = pdata->buck1_gpiodvs; + max8997->buck2_gpiodvs = pdata->buck2_gpiodvs; + max8997->buck5_gpiodvs = pdata->buck5_gpiodvs; + memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3); + max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect; for (i = 0; i < 8; i++) { max8997->buck1_vol[i] = ret = -- cgit v0.10.2 From 90609503b71b6ec4aaf325c88de98da28740bc1d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 6 Jul 2011 11:41:12 +0800 Subject: regulator: db8500-prcmu: small fixes Small cleanups for better readability. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c index e5f7b8f..2bb8f45 100644 --- a/drivers/regulator/db8500-prcmu.c +++ b/drivers/regulator/db8500-prcmu.c @@ -266,7 +266,7 @@ static struct regulator_ops db8500_regulator_switch_ops = { * Regulator information */ static struct db8500_regulator_info - db8500_regulator_info[DB8500_NUM_REGULATORS] = { +db8500_regulator_info[DB8500_NUM_REGULATORS] = { [DB8500_REGULATOR_VAPE] = { .desc = { .name = "db8500-vape", @@ -492,11 +492,9 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev) info->desc.name, err); /* if failing, unregister all earlier regulators */ - i--; - while (i >= 0) { + while (--i >= 0) { info = &db8500_regulator_info[i]; regulator_unregister(info->rdev); - i--; } return err; } @@ -536,13 +534,7 @@ static struct platform_driver db8500_regulator_driver = { static int __init db8500_regulator_init(void) { - int ret; - - ret = platform_driver_register(&db8500_regulator_driver); - if (ret < 0) - return -ENODEV; - - return 0; + return platform_driver_register(&db8500_regulator_driver); } static void __exit db8500_regulator_exit(void) -- cgit v0.10.2 From 6ff325a2d85481cbe31dfbb74b4fd2d94c115300 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Thu, 7 Jul 2011 16:51:56 +0900 Subject: regulator: max8997: Fix setting inappropriate value for ramp_delay variable The ramp_delay variable can be set lower than the desired value. This patch fixes it. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: KyungMin Park Acked-by: Mark Brown Signed-off-by: Liam Girdwood diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index f8940c6..ad6628c 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -544,7 +544,8 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev, rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) { /* If the voltage is increasing */ if (org < i) - udelay(desc->step * (i - org) / max8997->ramp_delay); + udelay(DIV_ROUND_UP(desc->step * (i - org), + max8997->ramp_delay)); } return ret; -- cgit v0.10.2 From c7e89b16eb90e7bdf0d71bd5ba265ce8d424f30b Mon Sep 17 00:00:00 2001 From: Heechul Yun Date: Fri, 8 Jul 2011 13:32:34 +0100 Subject: ARM: 6995/2: mm: remove unnecessary cache flush on v6 copypage Originally introduced to maintain coherency between icache and dcache in v6 nonaliasing mode. This is now handled by __sync_icache_dcache since c0177800, therefore unnecessary in this function. Signed-off-by: Heechul Yun Acked-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index bdba6c6..63cca00 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -41,7 +41,6 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, kfrom = kmap_atomic(from, KM_USER0); kto = kmap_atomic(to, KM_USER1); copy_page(kto, kfrom); - __cpuc_flush_dcache_area(kto, PAGE_SIZE); kunmap_atomic(kto, KM_USER1); kunmap_atomic(kfrom, KM_USER0); } -- cgit v0.10.2 From f483d3923dc3a6394c483e28ccb3fe700bdf399e Mon Sep 17 00:00:00 2001 From: Ram Pai Date: Thu, 7 Jul 2011 11:19:10 -0700 Subject: PCI: conditional resource-reallocation through kernel parameter pci=realloc Multiple attempts to dynamically reallocate pci resources have unfortunately lead to regressions. Though we continue to fix the regressions and fine tune the dynamic-reallocation behavior, we have not reached a acceptable state yet. This patch provides a interim solution. It disables dynamic reallocation by default, but adds the ability to enable it through pci=realloc kernel command line parameter. Tested-by: Oliver Hartkopp Signed-off-by: Ram Pai Signed-off-by: Jesse Barnes diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index fd248a31..aa47be7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2015,6 +2015,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. the default. off: Turn ECRC off on: Turn ECRC on. + realloc reallocate PCI resources if allocations done by BIOS + are erroneous. pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power Management. diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 2c5b9b9..692671b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3483,6 +3483,8 @@ static int __init pci_setup(char *str) pci_no_msi(); } else if (!strcmp(str, "noaer")) { pci_no_aer(); + } else if (!strncmp(str, "realloc", 7)) { + pci_realloc(); } else if (!strcmp(str, "nodomains")) { pci_no_domains(); } else if (!strncmp(str, "cbiosize=", 9)) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 731e202..3a39bf1 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -146,6 +146,8 @@ static inline void pci_no_msi(void) { } static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } #endif +extern void pci_realloc(void); + static inline int pci_no_d1d2(struct pci_dev *dev) { unsigned int parent_dstates = 0; diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 1e9e5a5..9995842 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -47,6 +47,13 @@ struct resource_list_x { (head)->next = NULL; \ } while (0) +int pci_realloc_enable = 0; +#define pci_realloc_enabled() pci_realloc_enable +void pci_realloc(void) +{ + pci_realloc_enable = 1; +} + /** * add_to_list() - add a new resource tracker to the list * @head: Head of the list @@ -1025,6 +1032,7 @@ static int __init pci_get_max_depth(void) return depth; } + /* * first try will not touch pci bridge res * second and later try will clear small leaf bridge res @@ -1068,6 +1076,13 @@ again: /* any device complain? */ if (!head.next) goto enable_and_dump; + + /* don't realloc if asked to do so */ + if (!pci_realloc_enabled()) { + free_list(resource_list_x, &head); + goto enable_and_dump; + } + failed_type = 0; for (list = head.next; list;) { failed_type |= list->flags; -- cgit v0.10.2 From 27739e694a3c34b5e371575d74e500d60111c689 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 27 Jun 2011 11:22:46 -0700 Subject: hwmon: (lm95241) Fix chip detection code The LM95241 driver accepts every chip ID equal to or larger than 0xA4 as its own, and other chips such as LM95245 use chip IDs in the accepted ID range. This results in false chip detection. Fix problem by accepting only the known LM95241 chip ID. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Cc: stable@kernel.org # 2.6.30+ diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index 1a6dfb6..01c638e 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -339,7 +339,7 @@ static int lm95241_detect(struct i2c_client *new_client, if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) == MANUFACTURER_ID) && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) - >= DEFAULT_REVISION)) { + == DEFAULT_REVISION)) { name = DEVNAME; } else { dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n", -- cgit v0.10.2 From 08951e545918c1594434d000d88a7793e2452a9b Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 8 Jul 2011 15:39:36 -0700 Subject: mm: vmscan: correct check for kswapd sleeping in sleeping_prematurely MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During allocator-intensive workloads, kswapd will be woken frequently causing free memory to oscillate between the high and min watermark. This is expected behaviour. Unfortunately, if the highest zone is small, a problem occurs. This seems to happen most with recent sandybridge laptops but it's probably a co-incidence as some of these laptops just happen to have a small Normal zone. The reproduction case is almost always during copying large files that kswapd pegs at 100% CPU until the file is deleted or cache is dropped. The problem is mostly down to sleeping_prematurely() keeping kswapd awake when the highest zone is small and unreclaimable and compounded by the fact we shrink slabs even when not shrinking zones causing a lot of time to be spent in shrinkers and a lot of memory to be reclaimed. Patch 1 corrects sleeping_prematurely to check the zones matching the classzone_idx instead of all zones. Patch 2 avoids shrinking slab when we are not shrinking a zone. Patch 3 notes that sleeping_prematurely is checking lower zones against a high classzone which is not what allocators or balance_pgdat() is doing leading to an artifical belief that kswapd should be still awake. Patch 4 notes that when balance_pgdat() gives up on a high zone that the decision is not communicated to sleeping_prematurely() This problem affects 2.6.38.8 for certain and is expected to affect 2.6.39 and 3.0-rc4 as well. If accepted, they need to go to -stable to be picked up by distros and this series is against 3.0-rc4. I've cc'd people that reported similar problems recently to see if they still suffer from the problem and if this fixes it. This patch: correct the check for kswapd sleeping in sleeping_prematurely() During allocator-intensive workloads, kswapd will be woken frequently causing free memory to oscillate between the high and min watermark. This is expected behaviour. A problem occurs if the highest zone is small. balance_pgdat() only considers unreclaimable zones when priority is DEF_PRIORITY but sleeping_prematurely considers all zones. It's possible for this sequence to occur 1. kswapd wakes up and enters balance_pgdat() 2. At DEF_PRIORITY, marks highest zone unreclaimable 3. At DEF_PRIORITY-1, ignores highest zone setting end_zone 4. At DEF_PRIORITY-1, calls shrink_slab freeing memory from highest zone, clearing all_unreclaimable. Highest zone is still unbalanced 5. kswapd returns and calls sleeping_prematurely 6. sleeping_prematurely looks at *all* zones, not just the ones being considered by balance_pgdat. The highest small zone has all_unreclaimable cleared but the zone is not balanced. all_zones_ok is false so kswapd stays awake This patch corrects the behaviour of sleeping_prematurely to check the zones balance_pgdat() checked. Signed-off-by: Mel Gorman Reported-by: Pádraig Brady Tested-by: Pádraig Brady Tested-by: Andrew Lutomirski Acked-by: Rik van Riel Reviewed-by: Minchan Kim Reviewed-by: KOSAKI Motohiro Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 4f49535..04c49fe 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2326,7 +2326,7 @@ static bool sleeping_prematurely(pg_data_t *pgdat, int order, long remaining, return true; /* Check the watermark levels */ - for (i = 0; i < pgdat->nr_zones; i++) { + for (i = 0; i <= classzone_idx; i++) { struct zone *zone = pgdat->node_zones + i; if (!populated_zone(zone)) -- cgit v0.10.2 From d7868dae893c83c50c7824bc2bc75f93d114669f Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 8 Jul 2011 15:39:38 -0700 Subject: mm: vmscan: do not apply pressure to slab if we are not applying pressure to zone MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During allocator-intensive workloads, kswapd will be woken frequently causing free memory to oscillate between the high and min watermark. This is expected behaviour. When kswapd applies pressure to zones during node balancing, it checks if the zone is above a high+balance_gap threshold. If it is, it does not apply pressure but it unconditionally shrinks slab on a global basis which is excessive. In the event kswapd is being kept awake due to a high small unreclaimable zone, it skips zone shrinking but still calls shrink_slab(). Once pressure has been applied, the check for zone being unreclaimable is being made before the check is made if all_unreclaimable should be set. This miss of unreclaimable can cause has_under_min_watermark_zone to be set due to an unreclaimable zone preventing kswapd backing off on congestion_wait(). Signed-off-by: Mel Gorman Reported-by: Pádraig Brady Tested-by: Pádraig Brady Tested-by: Andrew Lutomirski Acked-by: Rik van Riel Reviewed-by: Minchan Kim Reviewed-by: KOSAKI Motohiro Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 04c49fe..a024586 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2510,18 +2510,18 @@ loop_again: KSWAPD_ZONE_BALANCE_GAP_RATIO); if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone) + balance_gap, - end_zone, 0)) + end_zone, 0)) { shrink_zone(priority, zone, &sc); - reclaim_state->reclaimed_slab = 0; - nr_slab = shrink_slab(&shrink, sc.nr_scanned, lru_pages); - sc.nr_reclaimed += reclaim_state->reclaimed_slab; - total_scanned += sc.nr_scanned; - if (zone->all_unreclaimable) - continue; - if (nr_slab == 0 && - !zone_reclaimable(zone)) - zone->all_unreclaimable = 1; + reclaim_state->reclaimed_slab = 0; + nr_slab = shrink_slab(&shrink, sc.nr_scanned, lru_pages); + sc.nr_reclaimed += reclaim_state->reclaimed_slab; + total_scanned += sc.nr_scanned; + + if (nr_slab == 0 && !zone_reclaimable(zone)) + zone->all_unreclaimable = 1; + } + /* * If we've done a decent amount of scanning and * the reclaim ratio is low, start doing writepage @@ -2531,6 +2531,9 @@ loop_again: total_scanned > sc.nr_reclaimed + sc.nr_reclaimed / 2) sc.may_writepage = 1; + if (zone->all_unreclaimable) + continue; + if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone), end_zone, 0)) { all_zones_ok = 0; -- cgit v0.10.2 From da175d06b437093f93109ba9e5efbe44dfdf9409 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 8 Jul 2011 15:39:39 -0700 Subject: mm: vmscan: evaluate the watermarks against the correct classzone MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When deciding if kswapd is sleeping prematurely, the classzone is taken into account but this is different to what balance_pgdat() and the allocator are doing. Specifically, the DMA zone will be checked based on the classzone used when waking kswapd which could be for a GFP_KERNEL or GFP_HIGHMEM request. The lowmem reserve limit kicks in, the watermark is not met and kswapd thinks it's sleeping prematurely keeping kswapd awake in error. Signed-off-by: Mel Gorman Reported-by: Pádraig Brady Tested-by: Pádraig Brady Tested-by: Andrew Lutomirski Acked-by: Rik van Riel Reviewed-by: Minchan Kim Cc: KOSAKI Motohiro Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index a024586..a51b3c9 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2344,7 +2344,7 @@ static bool sleeping_prematurely(pg_data_t *pgdat, int order, long remaining, } if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone), - classzone_idx, 0)) + i, 0)) all_zones_ok = false; else balanced += zone->present_pages; -- cgit v0.10.2 From 215ddd6664ced067afca7eebd2d1eb83f064ff5a Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 8 Jul 2011 15:39:40 -0700 Subject: mm: vmscan: only read new_classzone_idx from pgdat when reclaiming successfully MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During allocator-intensive workloads, kswapd will be woken frequently causing free memory to oscillate between the high and min watermark. This is expected behaviour. Unfortunately, if the highest zone is small, a problem occurs. When balance_pgdat() returns, it may be at a lower classzone_idx than it started because the highest zone was unreclaimable. Before checking if it should go to sleep though, it checks pgdat->classzone_idx which when there is no other activity will be MAX_NR_ZONES-1. It interprets this as it has been woken up while reclaiming, skips scheduling and reclaims again. As there is no useful reclaim work to do, it enters into a loop of shrinking slab consuming loads of CPU until the highest zone becomes reclaimable for a long period of time. There are two problems here. 1) If the returned classzone or order is lower, it'll continue reclaiming without scheduling. 2) if the highest zone was marked unreclaimable but balance_pgdat() returns immediately at DEF_PRIORITY, the new lower classzone is not communicated back to kswapd() for sleeping. This patch does two things that are related. If the end_zone is unreclaimable, this information is communicated back. Second, if the classzone or order was reduced due to failing to reclaim, new information is not read from pgdat and instead an attempt is made to go to sleep. Due to this, it is also necessary that pgdat->classzone_idx be initialised each time to pgdat->nr_zones - 1 to avoid re-reads being interpreted as wakeups. Signed-off-by: Mel Gorman Reported-by: Pádraig Brady Tested-by: Pádraig Brady Tested-by: Andrew Lutomirski Acked-by: Rik van Riel Cc: Minchan Kim Cc: KOSAKI Motohiro Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index a51b3c9..5ed24b9 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2451,7 +2451,6 @@ loop_again: if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone), 0, 0)) { end_zone = i; - *classzone_idx = i; break; } } @@ -2531,8 +2530,11 @@ loop_again: total_scanned > sc.nr_reclaimed + sc.nr_reclaimed / 2) sc.may_writepage = 1; - if (zone->all_unreclaimable) + if (zone->all_unreclaimable) { + if (end_zone && end_zone == i) + end_zone--; continue; + } if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone), end_zone, 0)) { @@ -2712,8 +2714,8 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int order, int classzone_idx) */ static int kswapd(void *p) { - unsigned long order; - int classzone_idx; + unsigned long order, new_order; + int classzone_idx, new_classzone_idx; pg_data_t *pgdat = (pg_data_t*)p; struct task_struct *tsk = current; @@ -2743,17 +2745,23 @@ static int kswapd(void *p) tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD; set_freezable(); - order = 0; - classzone_idx = MAX_NR_ZONES - 1; + order = new_order = 0; + classzone_idx = new_classzone_idx = pgdat->nr_zones - 1; for ( ; ; ) { - unsigned long new_order; - int new_classzone_idx; int ret; - new_order = pgdat->kswapd_max_order; - new_classzone_idx = pgdat->classzone_idx; - pgdat->kswapd_max_order = 0; - pgdat->classzone_idx = MAX_NR_ZONES - 1; + /* + * If the last balance_pgdat was unsuccessful it's unlikely a + * new request of a similar or harder type will succeed soon + * so consider going to sleep on the basis we reclaimed at + */ + if (classzone_idx >= new_classzone_idx && order == new_order) { + new_order = pgdat->kswapd_max_order; + new_classzone_idx = pgdat->classzone_idx; + pgdat->kswapd_max_order = 0; + pgdat->classzone_idx = pgdat->nr_zones - 1; + } + if (order < new_order || classzone_idx > new_classzone_idx) { /* * Don't sleep if someone wants a larger 'order' @@ -2766,7 +2774,7 @@ static int kswapd(void *p) order = pgdat->kswapd_max_order; classzone_idx = pgdat->classzone_idx; pgdat->kswapd_max_order = 0; - pgdat->classzone_idx = MAX_NR_ZONES - 1; + pgdat->classzone_idx = pgdat->nr_zones - 1; } ret = try_to_freeze(); -- cgit v0.10.2 From 0b43c3aab0137595335b08b340a3f3e5af9818a6 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 8 Jul 2011 15:39:41 -0700 Subject: mm: __tlb_remove_page() check the correct batch __tlb_remove_page() switches to a new batch page, but still checks space in the old batch. This check always fails, and causes a forced tlb flush. Signed-off-by: Shaohua Li Acked-by: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index 40b7531..9b8a01d 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -305,6 +305,7 @@ int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) if (batch->nr == batch->max) { if (!tlb_next_batch(tlb)) return 0; + batch = tlb->active; } VM_BUG_ON(batch->nr > batch->max); -- cgit v0.10.2 From 4d0c066d29f030d47d19678f8008933e67dd3b72 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Fri, 8 Jul 2011 15:39:42 -0700 Subject: memcg: fix reclaimable lru check in memcg Now, in mem_cgroup_hierarchical_reclaim(), mem_cgroup_local_usage() is used for checking whether the memcg contains reclaimable pages or not. If no pages in it, the routine skips it. But, mem_cgroup_local_usage() contains Unevictable pages and cannot handle "noswap" condition correctly. This doesn't work on a swapless system. This patch adds test_mem_cgroup_reclaimable() and replaces mem_cgroup_local_usage(). test_mem_cgroup_reclaimable() see LRU counter and returns correct answer to the caller. And this new function has "noswap" argument and can see only FILE LRU if necessary. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix kerneldoc layout] Signed-off-by: KAMEZAWA Hiroyuki Cc: Michal Hocko Cc: Ying Han Cc: Johannes Weiner Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index ddffc74..a7a5cb1 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -577,15 +577,6 @@ static long mem_cgroup_read_stat(struct mem_cgroup *mem, return val; } -static long mem_cgroup_local_usage(struct mem_cgroup *mem) -{ - long ret; - - ret = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_RSS); - ret += mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_CACHE); - return ret; -} - static void mem_cgroup_swap_statistics(struct mem_cgroup *mem, bool charge) { @@ -1129,7 +1120,6 @@ unsigned long mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg, return MEM_CGROUP_ZSTAT(mz, lru); } -#ifdef CONFIG_NUMA static unsigned long mem_cgroup_node_nr_file_lru_pages(struct mem_cgroup *memcg, int nid) { @@ -1141,6 +1131,17 @@ static unsigned long mem_cgroup_node_nr_file_lru_pages(struct mem_cgroup *memcg, return ret; } +static unsigned long mem_cgroup_node_nr_anon_lru_pages(struct mem_cgroup *memcg, + int nid) +{ + unsigned long ret; + + ret = mem_cgroup_get_zonestat_node(memcg, nid, LRU_INACTIVE_ANON) + + mem_cgroup_get_zonestat_node(memcg, nid, LRU_ACTIVE_ANON); + return ret; +} + +#if MAX_NUMNODES > 1 static unsigned long mem_cgroup_nr_file_lru_pages(struct mem_cgroup *memcg) { u64 total = 0; @@ -1152,17 +1153,6 @@ static unsigned long mem_cgroup_nr_file_lru_pages(struct mem_cgroup *memcg) return total; } -static unsigned long mem_cgroup_node_nr_anon_lru_pages(struct mem_cgroup *memcg, - int nid) -{ - unsigned long ret; - - ret = mem_cgroup_get_zonestat_node(memcg, nid, LRU_INACTIVE_ANON) + - mem_cgroup_get_zonestat_node(memcg, nid, LRU_ACTIVE_ANON); - - return ret; -} - static unsigned long mem_cgroup_nr_anon_lru_pages(struct mem_cgroup *memcg) { u64 total = 0; @@ -1559,6 +1549,28 @@ mem_cgroup_select_victim(struct mem_cgroup *root_mem) return ret; } +/** + * test_mem_cgroup_node_reclaimable + * @mem: the target memcg + * @nid: the node ID to be checked. + * @noswap : specify true here if the user wants flle only information. + * + * This function returns whether the specified memcg contains any + * reclaimable pages on a node. Returns true if there are any reclaimable + * pages in the node. + */ +static bool test_mem_cgroup_node_reclaimable(struct mem_cgroup *mem, + int nid, bool noswap) +{ + if (mem_cgroup_node_nr_file_lru_pages(mem, nid)) + return true; + if (noswap || !total_swap_pages) + return false; + if (mem_cgroup_node_nr_anon_lru_pages(mem, nid)) + return true; + return false; + +} #if MAX_NUMNODES > 1 /* @@ -1580,15 +1592,8 @@ static void mem_cgroup_may_update_nodemask(struct mem_cgroup *mem) for_each_node_mask(nid, node_states[N_HIGH_MEMORY]) { - if (mem_cgroup_get_zonestat_node(mem, nid, LRU_INACTIVE_FILE) || - mem_cgroup_get_zonestat_node(mem, nid, LRU_ACTIVE_FILE)) - continue; - - if (total_swap_pages && - (mem_cgroup_get_zonestat_node(mem, nid, LRU_INACTIVE_ANON) || - mem_cgroup_get_zonestat_node(mem, nid, LRU_ACTIVE_ANON))) - continue; - node_clear(nid, mem->scan_nodes); + if (!test_mem_cgroup_node_reclaimable(mem, nid, false)) + node_clear(nid, mem->scan_nodes); } } @@ -1627,11 +1632,51 @@ int mem_cgroup_select_victim_node(struct mem_cgroup *mem) return node; } +/* + * Check all nodes whether it contains reclaimable pages or not. + * For quick scan, we make use of scan_nodes. This will allow us to skip + * unused nodes. But scan_nodes is lazily updated and may not cotain + * enough new information. We need to do double check. + */ +bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap) +{ + int nid; + + /* + * quick check...making use of scan_node. + * We can skip unused nodes. + */ + if (!nodes_empty(mem->scan_nodes)) { + for (nid = first_node(mem->scan_nodes); + nid < MAX_NUMNODES; + nid = next_node(nid, mem->scan_nodes)) { + + if (test_mem_cgroup_node_reclaimable(mem, nid, noswap)) + return true; + } + } + /* + * Check rest of nodes. + */ + for_each_node_state(nid, N_HIGH_MEMORY) { + if (node_isset(nid, mem->scan_nodes)) + continue; + if (test_mem_cgroup_node_reclaimable(mem, nid, noswap)) + return true; + } + return false; +} + #else int mem_cgroup_select_victim_node(struct mem_cgroup *mem) { return 0; } + +bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap) +{ + return test_mem_cgroup_node_reclaimable(mem, 0, noswap); +} #endif /* @@ -1702,7 +1747,7 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem, } } } - if (!mem_cgroup_local_usage(victim)) { + if (!mem_cgroup_reclaimable(victim, noswap)) { /* this cgroup's local usage == 0 */ css_put(&victim->css); continue; -- cgit v0.10.2 From 453a9bf347f1e22a5bb3605ced43b2366921221d Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Fri, 8 Jul 2011 15:39:43 -0700 Subject: memcg: fix numa scan information update to be triggered by memory event commit 889976dbcb12 ("memcg: reclaim memory from nodes in round-robin order") adds an numa node round-robin for memcg. But the information is updated once per 10sec. This patch changes the update trigger from jiffies to memcg's event count. After this patch, numa scan information will be updated when we see 1024 events of pagein/pageout under a memcg. [akpm@linux-foundation.org: attempt to repair code layout] Signed-off-by: KAMEZAWA Hiroyuki Cc: Michal Hocko Cc: Ying Han Cc: Johannes Weiner Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memcontrol.c b/mm/memcontrol.c index a7a5cb1..e013b8e 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -108,10 +108,12 @@ enum mem_cgroup_events_index { enum mem_cgroup_events_target { MEM_CGROUP_TARGET_THRESH, MEM_CGROUP_TARGET_SOFTLIMIT, + MEM_CGROUP_TARGET_NUMAINFO, MEM_CGROUP_NTARGETS, }; #define THRESHOLDS_EVENTS_TARGET (128) #define SOFTLIMIT_EVENTS_TARGET (1024) +#define NUMAINFO_EVENTS_TARGET (1024) struct mem_cgroup_stat_cpu { long count[MEM_CGROUP_STAT_NSTATS]; @@ -237,7 +239,8 @@ struct mem_cgroup { int last_scanned_node; #if MAX_NUMNODES > 1 nodemask_t scan_nodes; - unsigned long next_scan_node_update; + atomic_t numainfo_events; + atomic_t numainfo_updating; #endif /* * Should the accounting and control be hierarchical, per subtree? @@ -680,6 +683,9 @@ static void __mem_cgroup_target_update(struct mem_cgroup *mem, int target) case MEM_CGROUP_TARGET_SOFTLIMIT: next = val + SOFTLIMIT_EVENTS_TARGET; break; + case MEM_CGROUP_TARGET_NUMAINFO: + next = val + NUMAINFO_EVENTS_TARGET; + break; default: return; } @@ -698,11 +704,19 @@ static void memcg_check_events(struct mem_cgroup *mem, struct page *page) mem_cgroup_threshold(mem); __mem_cgroup_target_update(mem, MEM_CGROUP_TARGET_THRESH); if (unlikely(__memcg_event_check(mem, - MEM_CGROUP_TARGET_SOFTLIMIT))){ + MEM_CGROUP_TARGET_SOFTLIMIT))) { mem_cgroup_update_tree(mem, page); __mem_cgroup_target_update(mem, - MEM_CGROUP_TARGET_SOFTLIMIT); + MEM_CGROUP_TARGET_SOFTLIMIT); + } +#if MAX_NUMNODES > 1 + if (unlikely(__memcg_event_check(mem, + MEM_CGROUP_TARGET_NUMAINFO))) { + atomic_inc(&mem->numainfo_events); + __mem_cgroup_target_update(mem, + MEM_CGROUP_TARGET_NUMAINFO); } +#endif } } @@ -1582,11 +1596,15 @@ static bool test_mem_cgroup_node_reclaimable(struct mem_cgroup *mem, static void mem_cgroup_may_update_nodemask(struct mem_cgroup *mem) { int nid; - - if (time_after(mem->next_scan_node_update, jiffies)) + /* + * numainfo_events > 0 means there was at least NUMAINFO_EVENTS_TARGET + * pagein/pageout changes since the last update. + */ + if (!atomic_read(&mem->numainfo_events)) + return; + if (atomic_inc_return(&mem->numainfo_updating) > 1) return; - mem->next_scan_node_update = jiffies + 10*HZ; /* make a nodemask where this memcg uses memory from */ mem->scan_nodes = node_states[N_HIGH_MEMORY]; @@ -1595,6 +1613,9 @@ static void mem_cgroup_may_update_nodemask(struct mem_cgroup *mem) if (!test_mem_cgroup_node_reclaimable(mem, nid, false)) node_clear(nid, mem->scan_nodes); } + + atomic_set(&mem->numainfo_events, 0); + atomic_set(&mem->numainfo_updating, 0); } /* -- cgit v0.10.2 From f607e7fc5fb94d92030c4527287e9c149ddf9e65 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Dagenais?= Date: Fri, 8 Jul 2011 15:39:44 -0700 Subject: w1: ds1wm: add a reset recovery parameter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a regression in 3.0 reported by Paul Parsons regarding the removal of the msleep(1) in the ds1wm_reset() function: : The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying" : error messages on an HP iPAQ hx4700 PDA (XScale-PXA270): : : : Driver for 1-wire Dallas network protocol. : DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko : 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko : ds1wm ds1wm: pass: 1 bus error, retrying : ds1wm ds1wm: pass: 2 bus error, retrying : ds1wm ds1wm: pass: 3 bus error, retrying : ds1wm ds1wm: pass: 4 bus error, retrying : ds1wm ds1wm: pass: 5 bus error, retrying : ... : : The visible result is that the battery charging LED is erratic; sometimes : it works, mostly it doesn't. : : The linux-2.6.39 DS1WM 1-wire driver worked OK. I haven't tried 3.0-rc1, : 3.0-rc2, or 3.0-rc3. This sleep should not be required on normal circuitry provided the pull-ups on the bus are correctly adapted to the slaves. Unfortunately, this is not always the case. The sleep is restored but as a parameter to the probe function in the pdata. [akpm@linux-foundation.org: coding-style fixes] Reported-by: Paul Parsons Tested-by: Paul Parsons Signed-off-by: Jean-François Dagenais Cc: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index c27fd1f..c71ae09 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -619,6 +619,7 @@ static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk) /* MFD cells (SPI, PWM, LED, DS1WM, MMC) */ static struct ds1wm_driver_data ds1wm_pdata = { .active_high = 1, + .reset_recover_delay = 1, }; static struct resource ds1wm_resources[] = { diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c index 2808bd1..04c7093 100644 --- a/drivers/mfd/htc-pasic3.c +++ b/drivers/mfd/htc-pasic3.c @@ -99,6 +99,7 @@ static int ds1wm_disable(struct platform_device *pdev) static struct ds1wm_driver_data ds1wm_pdata = { .active_high = 0, + .reset_recover_delay = 1, }; static struct resource ds1wm_resources[] __initdata = { diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c index ad57593..a0c8965 100644 --- a/drivers/w1/masters/ds1wm.c +++ b/drivers/w1/masters/ds1wm.c @@ -109,6 +109,7 @@ struct ds1wm_data { /* byte to write that makes all intr disabled, */ /* considering active_state (IAS) (optimization) */ u8 int_en_reg_none; + unsigned int reset_recover_delay; /* see ds1wm.h */ }; static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg, @@ -187,6 +188,9 @@ static int ds1wm_reset(struct ds1wm_data *ds1wm_data) return 1; } + if (ds1wm_data->reset_recover_delay) + msleep(ds1wm_data->reset_recover_delay); + return 0; } @@ -490,6 +494,7 @@ static int ds1wm_probe(struct platform_device *pdev) } ds1wm_data->irq = res->start; ds1wm_data->int_en_reg_none = (plat->active_high ? DS1WM_INTEN_IAS : 0); + ds1wm_data->reset_recover_delay = plat->reset_recover_delay; if (res->flags & IORESOURCE_IRQ_HIGHEDGE) irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_RISING); diff --git a/include/linux/mfd/ds1wm.h b/include/linux/mfd/ds1wm.h index be469a3..38a372a 100644 --- a/include/linux/mfd/ds1wm.h +++ b/include/linux/mfd/ds1wm.h @@ -3,4 +3,11 @@ struct ds1wm_driver_data { int active_high; int clock_rate; + /* in milliseconds, the amount of time to */ + /* sleep following a reset pulse. Zero */ + /* should work if your bus devices recover*/ + /* time respects the 1-wire spec since the*/ + /* ds1wm implements the precise timings of*/ + /* a reset pulse/presence detect sequence.*/ + unsigned int reset_recover_delay; }; -- cgit v0.10.2 From 8f3b1327aa454bc8283e96bca7669c3c88b83f79 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 8 Jul 2011 15:39:46 -0700 Subject: mm/nommu.c: fix remap_pfn_range() remap_pfn_range() means map physical address pfn<vm_start = pfn << PAGE_SHIFT which is wrong acroding the original meaning of this function. And some driver developer using remap_pfn_range() with correct parameter will get unexpected result because vm_start is changed. It should be implementd like addr = pfn << PAGE_SHIFT but which is meanless on nommu arch, this patch just make it simply return. Parameter name and setting of vma->vm_flags also be fixed. Signed-off-by: Bob Liu Cc: Geert Uytterhoeven Cc: David Howells Acked-by: Greg Ungerer Cc: Mike Frysinger Cc: Bob Liu Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/nommu.c b/mm/nommu.c index 1fd0c51..9edc897 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1813,10 +1813,13 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address, return NULL; } -int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long to, unsigned long size, pgprot_t prot) +int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, + unsigned long pfn, unsigned long size, pgprot_t prot) { - vma->vm_start = vma->vm_pgoff << PAGE_SHIFT; + if (addr != (pfn << PAGE_SHIFT)) + return -EINVAL; + + vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; return 0; } EXPORT_SYMBOL(remap_pfn_range); -- cgit v0.10.2 From 30cb35be6daff48ad6c049466ac92a22c200d1b2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 8 Jul 2011 15:39:46 -0700 Subject: drivers/leds/leds-pca9532.c: change driver name to be unique This driver handles the variants pca9530-pca9533, so it chose the name "pca953x". However, there is a gpio driver which decided on the same name. As a result, those two can't be loaded at the same time. Add a subsystem prefix to make the driver name unique. Device matching will not suffer, because both are I2C drivers which match using a i2c_device_id-table which is not altered. Signed-off-by: Wolfram Sang Acked-by: Jean Delvare Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index d8d3a1e..a2c8746 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -88,7 +88,7 @@ static const struct pca9532_chip_info pca9532_chip_info_tbl[] = { static struct i2c_driver pca9532_driver = { .driver = { - .name = "pca953x", + .name = "leds-pca953x", }, .probe = pca9532_probe, .remove = pca9532_remove, -- cgit v0.10.2 From c2d197e82b6267fd3338f3fbcb12750ca9f5abda Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 8 Jul 2011 15:39:48 -0700 Subject: MAINTAINERS: update Bjorn Helgaas's email address Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 9820e89..4af7ab0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4982,7 +4982,7 @@ F: drivers/power/power_supply* PNP SUPPORT M: Adam Belay -M: Bjorn Helgaas +M: Bjorn Helgaas S: Maintained F: drivers/pnp/ -- cgit v0.10.2 From abaead6ac55dbda8b4bae40251d69dc3f0c49b1c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 9 Jul 2011 11:55:28 +0200 Subject: ALSA: hda - Fix a copmile warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's harmless but annyoing. sound/pci/hda/patch_realtek.c: In function ‘alc_cap_getput_caller’: sound/pci/hda/patch_realtek.c:2722:9: warning: ‘err’ may be used uninitialized in this function Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7d49271..b48fb43 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2719,7 +2719,7 @@ static int alc_cap_getput_caller(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct alc_spec *spec = codec->spec; - int i, err; + int i, err = 0; mutex_lock(&codec->control_mutex); if (check_adc_switch && spec->dual_adc_switch) { -- cgit v0.10.2 From 505b04e0f80a1520245d66e94c3532ec417603f0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 5 Jul 2011 00:15:04 -0700 Subject: ASoC: sh: fsi-ak4642: fixup snd_soc_card name it shouldn't contain space letters and special letters like parentheses. aplay will be "Segmentation fault" without this patch. special thanks to Takashi. Signed-off-by: Kuninori Morimoto Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/sh/fsi-ak4642.c b/sound/soc/sh/fsi-ak4642.c index d6f4703..770a71a 100644 --- a/sound/soc/sh/fsi-ak4642.c +++ b/sound/soc/sh/fsi-ak4642.c @@ -97,7 +97,7 @@ static int fsi_ak4642_remove(struct platform_device *pdev) static struct fsi_ak4642_data fsi_a_ak4642 = { .name = "AK4642", - .card = "FSIA (AK4642)", + .card = "FSIA-AK4642", .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0012", .platform = "sh_fsi.0", @@ -106,7 +106,7 @@ static struct fsi_ak4642_data fsi_a_ak4642 = { static struct fsi_ak4642_data fsi_b_ak4642 = { .name = "AK4642", - .card = "FSIB (AK4642)", + .card = "FSIB-AK4642", .cpu_dai = "fsib-dai", .codec = "ak4642-codec.0-0012", .platform = "sh_fsi.0", @@ -115,7 +115,7 @@ static struct fsi_ak4642_data fsi_b_ak4642 = { static struct fsi_ak4642_data fsi_a_ak4643 = { .name = "AK4643", - .card = "FSIA (AK4643)", + .card = "FSIA-AK4643", .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0013", .platform = "sh_fsi.0", @@ -124,7 +124,7 @@ static struct fsi_ak4642_data fsi_a_ak4643 = { static struct fsi_ak4642_data fsi_b_ak4643 = { .name = "AK4643", - .card = "FSIB (AK4643)", + .card = "FSIB-AK4643", .cpu_dai = "fsib-dai", .codec = "ak4642-codec.0-0013", .platform = "sh_fsi.0", @@ -133,7 +133,7 @@ static struct fsi_ak4642_data fsi_b_ak4643 = { static struct fsi_ak4642_data fsi2_a_ak4642 = { .name = "AK4642", - .card = "FSI2A (AK4642)", + .card = "FSI2A-AK4642", .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0012", .platform = "sh_fsi2", @@ -142,7 +142,7 @@ static struct fsi_ak4642_data fsi2_a_ak4642 = { static struct fsi_ak4642_data fsi2_b_ak4642 = { .name = "AK4642", - .card = "FSI2B (AK4642)", + .card = "FSI2B-AK4642", .cpu_dai = "fsib-dai", .codec = "ak4642-codec.0-0012", .platform = "sh_fsi2", @@ -151,7 +151,7 @@ static struct fsi_ak4642_data fsi2_b_ak4642 = { static struct fsi_ak4642_data fsi2_a_ak4643 = { .name = "AK4643", - .card = "FSI2A (AK4643)", + .card = "FSI2A-AK4643", .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0013", .platform = "sh_fsi2", @@ -160,7 +160,7 @@ static struct fsi_ak4642_data fsi2_a_ak4643 = { static struct fsi_ak4642_data fsi2_b_ak4643 = { .name = "AK4643", - .card = "FSI2B (AK4643)", + .card = "FSI2B-AK4643", .cpu_dai = "fsib-dai", .codec = "ak4642-codec.0-0013", .platform = "sh_fsi2", -- cgit v0.10.2 From f15c9413310b1dcb55237e9cba16568e35f01471 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 5 Jul 2011 00:16:03 -0700 Subject: ASoC: sh: fsi-da7210: fixup snd_soc_card name it shouldn't contain space letters and special letters like parentheses. aplay will be "Segmentation fault" without this patch. special thanks to Takashi. Signed-off-by: Kuninori Morimoto Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/sh/fsi-da7210.c b/sound/soc/sh/fsi-da7210.c index dbafd7a..59553fd 100644 --- a/sound/soc/sh/fsi-da7210.c +++ b/sound/soc/sh/fsi-da7210.c @@ -42,7 +42,7 @@ static struct snd_soc_dai_link fsi_da7210_dai = { }; static struct snd_soc_card fsi_soc_card = { - .name = "FSI (DA7210)", + .name = "FSI-DA7210", .dai_link = &fsi_da7210_dai, .num_links = 1, }; -- cgit v0.10.2 From 2c7beb9285342e96f2ebd8ae24d708484e443a7d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 5 Jul 2011 00:16:17 -0700 Subject: ASoC: sh: fsi-hdmi: fixup snd_soc_card name it shouldn't contain space letters and special letters like parentheses. aplay will be "Segmentation fault" without this patch special thanks to Takashi. Signed-off-by: Kuninori Morimoto Acked-by: Liam Girdwood Signed-off-by: Mark Brown diff --git a/sound/soc/sh/fsi-hdmi.c b/sound/soc/sh/fsi-hdmi.c index 9719985..d3d9fd8 100644 --- a/sound/soc/sh/fsi-hdmi.c +++ b/sound/soc/sh/fsi-hdmi.c @@ -83,13 +83,13 @@ static int fsi_hdmi_remove(struct platform_device *pdev) static struct fsi_hdmi_data fsi2_a_hdmi = { .cpu_dai = "fsia-dai", - .card = "FSI2A (SH MOBILE HDMI)", + .card = "FSI2A-HDMI", .id = FSI_PORT_A, }; static struct fsi_hdmi_data fsi2_b_hdmi = { .cpu_dai = "fsib-dai", - .card = "FSI2B (SH MOBILE HDMI)", + .card = "FSI2B-HDMI", .id = FSI_PORT_B, }; -- cgit v0.10.2 From af61bdf035e2e4dd646b37b270bd558188a127c0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 9 Jul 2011 13:44:04 +0100 Subject: ARM: vfp: rename last_VFP_context to vfp_current_hw_state Rename the slightly confusing 'last_VFP_context' variable to be more descriptive of what it actually is. This variable stores a pointer to the current owner's vfpstate structure for the context held in the VFP hardware. Signed-off-by: Russell King diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 9897dcf..c75443e 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -77,9 +77,9 @@ ENTRY(vfp_support_entry) bne look_for_VFP_exceptions @ VFP is already enabled DBGSTR1 "enable %x", r10 - ldr r3, last_VFP_context_address + ldr r3, vfp_current_hw_state_address orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set - ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer + ldr r4, [r3, r11, lsl #2] @ vfp_current_hw_state pointer bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled cmp r4, r10 beq check_for_exception @ we are returning to the same @@ -116,7 +116,7 @@ ENTRY(vfp_support_entry) no_old_VFP_process: DBGSTR1 "load state %p", r10 - str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer + str r10, [r3, r11, lsl #2] @ update the vfp_current_hw_state pointer @ Load the saved state back into the VFP VFPFLDMIA r10, r5 @ reload the working registers while @ FPEXC is in a safe state @@ -207,8 +207,8 @@ ENTRY(vfp_save_state) ENDPROC(vfp_save_state) .align -last_VFP_context_address: - .word last_VFP_context +vfp_current_hw_state_address: + .word vfp_current_hw_state .macro tbl_branch, base, tmp, shift #ifdef CONFIG_THUMB2_KERNEL diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index f25e7ec..36403511 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -33,7 +33,13 @@ void vfp_support_entry(void); void vfp_null_entry(void); void (*vfp_vector)(void) = vfp_null_entry; -union vfp_state *last_VFP_context[NR_CPUS]; + +/* + * The pointer to the vfpstate structure of the thread which currently + * owns the context held in the VFP hardware, or NULL if the hardware + * context is invalid. + */ +union vfp_state *vfp_current_hw_state[NR_CPUS]; /* * Dual-use variable. @@ -57,12 +63,12 @@ static void vfp_thread_flush(struct thread_info *thread) /* * Disable VFP to ensure we initialize it first. We must ensure - * that the modification of last_VFP_context[] and hardware disable + * that the modification of vfp_current_hw_state[] and hardware disable * are done for the same CPU and without preemption. */ cpu = get_cpu(); - if (last_VFP_context[cpu] == vfp) - last_VFP_context[cpu] = NULL; + if (vfp_current_hw_state[cpu] == vfp) + vfp_current_hw_state[cpu] = NULL; fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); put_cpu(); } @@ -73,8 +79,8 @@ static void vfp_thread_exit(struct thread_info *thread) union vfp_state *vfp = &thread->vfpstate; unsigned int cpu = get_cpu(); - if (last_VFP_context[cpu] == vfp) - last_VFP_context[cpu] = NULL; + if (vfp_current_hw_state[cpu] == vfp) + vfp_current_hw_state[cpu] = NULL; put_cpu(); } @@ -129,9 +135,9 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * case the thread migrates to a different CPU. The * restoring is done lazily. */ - if ((fpexc & FPEXC_EN) && last_VFP_context[cpu]) { - vfp_save_state(last_VFP_context[cpu], fpexc); - last_VFP_context[cpu]->hard.cpu = cpu; + if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { + vfp_save_state(vfp_current_hw_state[cpu], fpexc); + vfp_current_hw_state[cpu]->hard.cpu = cpu; } /* * Thread migration, just force the reloading of the @@ -139,7 +145,7 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * contain stale data. */ if (thread->vfpstate.hard.cpu != cpu) - last_VFP_context[cpu] = NULL; + vfp_current_hw_state[cpu] = NULL; #endif /* @@ -415,7 +421,7 @@ static int vfp_pm_suspend(void) } /* clear any information we had about last context state */ - memset(last_VFP_context, 0, sizeof(last_VFP_context)); + memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state)); return 0; } @@ -451,7 +457,7 @@ void vfp_sync_hwstate(struct thread_info *thread) * If the thread we're interested in is the current owner of the * hardware VFP state, then we need to save its state. */ - if (last_VFP_context[cpu] == &thread->vfpstate) { + if (vfp_current_hw_state[cpu] == &thread->vfpstate) { u32 fpexc = fmrx(FPEXC); /* @@ -473,7 +479,7 @@ void vfp_flush_hwstate(struct thread_info *thread) * If the thread we're interested in is the current owner of the * hardware VFP state, then we need to save its state. */ - if (last_VFP_context[cpu] == &thread->vfpstate) { + if (vfp_current_hw_state[cpu] == &thread->vfpstate) { u32 fpexc = fmrx(FPEXC); fmxr(FPEXC, fpexc & ~FPEXC_EN); @@ -482,7 +488,7 @@ void vfp_flush_hwstate(struct thread_info *thread) * Set the context to NULL to force a reload the next time * the thread uses the VFP. */ - last_VFP_context[cpu] = NULL; + vfp_current_hw_state[cpu] = NULL; } #ifdef CONFIG_SMP @@ -514,7 +520,7 @@ static int vfp_hotplug(struct notifier_block *b, unsigned long action, { if (action == CPU_DYING || action == CPU_DYING_FROZEN) { unsigned int cpu = (long)hcpu; - last_VFP_context[cpu] = NULL; + vfp_current_hw_state[cpu] = NULL; } else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) vfp_enable(NULL); return NOTIFY_OK; -- cgit v0.10.2 From 08409c33d6fdb43fa19d7dbdafd4f280b7835592 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 9 Jul 2011 14:24:36 +0100 Subject: ARM: vfp: rename check_exception to vfp_hw_state_valid Rename this branch to more accurately reflect why its taken, rather than what the following code does. It is the only caller of this code. This helps to clarify following changes, yet this change results in no actual code change. Document the VFP hardware state at the target of this branch. Signed-off-by: Russell King diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index c75443e..404538a 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -81,11 +81,8 @@ ENTRY(vfp_support_entry) orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set ldr r4, [r3, r11, lsl #2] @ vfp_current_hw_state pointer bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled - cmp r4, r10 - beq check_for_exception @ we are returning to the same - @ process, so the registers are - @ still there. In this case, we do - @ not want to drop a pending exception. + cmp r4, r10 @ this thread owns the hw context? + beq vfp_hw_state_valid VFPFMXR FPEXC, r5 @ enable VFP, disable any pending @ exceptions, so we can get at the @@ -132,7 +129,8 @@ no_old_VFP_process: #endif VFPFMXR FPSCR, r5 @ restore status -check_for_exception: +@ The context stored in the VFP hardware is up to date with this thread +vfp_hw_state_valid: tst r1, #FPEXC_EX bne process_exception @ might as well handle the pending @ exception before retrying branch -- cgit v0.10.2 From f8f2a8522a88aacd62a310ce49e8dac530d1b403 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 9 Jul 2011 16:09:43 +0100 Subject: ARM: vfp: fix a hole in VFP thread migration Fix a hole in the VFP thread migration. Lets define two threads. Thread 1, we'll call 'interesting_thread' which is a thread which is running on CPU0, using VFP (so vfp_current_hw_state[0] = &interesting_thread->vfpstate) and gets migrated off to CPU1, where it continues execution of VFP instructions. Thread 2, we'll call 'new_cpu0_thread' which is the thread which takes over on CPU0. This has also been using VFP, and last used VFP on CPU0, but doesn't use it again. The following code will be executed twice: cpu = thread->cpu; /* * On SMP, if VFP is enabled, save the old state in * case the thread migrates to a different CPU. The * restoring is done lazily. */ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { vfp_save_state(vfp_current_hw_state[cpu], fpexc); vfp_current_hw_state[cpu]->hard.cpu = cpu; } /* * Thread migration, just force the reloading of the * state on the new CPU in case the VFP registers * contain stale data. */ if (thread->vfpstate.hard.cpu != cpu) vfp_current_hw_state[cpu] = NULL; The first execution will be on CPU0 to switch away from 'interesting_thread'. interesting_thread->cpu will be 0. So, vfp_current_hw_state[0] points at interesting_thread->vfpstate. The hardware state will be saved, along with the CPU number (0) that it was executing on. 'thread' will be 'new_cpu0_thread' with new_cpu0_thread->cpu = 0. Also, because it was executing on CPU0, new_cpu0_thread->vfpstate.hard.cpu = 0, and so the thread migration check is not triggered. This means that vfp_current_hw_state[0] remains pointing at interesting_thread. The second execution will be on CPU1 to switch _to_ 'interesting_thread'. So, 'thread' will be 'interesting_thread' and interesting_thread->cpu now will be 1. The previous thread executing on CPU1 is not relevant to this so we shall ignore that. We get to the thread migration check. Here, we discover that interesting_thread->vfpstate.hard.cpu = 0, yet interesting_thread->cpu is now 1, indicating thread migration. We set vfp_current_hw_state[1] to NULL. So, at this point vfp_current_hw_state[] contains the following: [0] = &interesting_thread->vfpstate [1] = NULL Our interesting thread now executes a VFP instruction, takes a fault which loads the state into the VFP hardware. Now, through the assembly we now have: [0] = &interesting_thread->vfpstate [1] = &interesting_thread->vfpstate CPU1 stops due to ptrace (and so saves its VFP state) using the thread switch code above), and CPU0 calls vfp_sync_hwstate(). if (vfp_current_hw_state[cpu] == &thread->vfpstate) { vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN); BANG, we corrupt interesting_thread's VFP state by overwriting the more up-to-date state saved by CPU1 with the old VFP state from CPU0. Fix this by ensuring that we have sane semantics for the various state describing variables: 1. vfp_current_hw_state[] points to the current owner of the context information stored in each CPUs hardware, or NULL if that state information is invalid. 2. thread->vfpstate.hard.cpu always contains the most recent CPU number which the state was loaded into or NR_CPUS if no CPU owns the state. So, for a particular CPU to be a valid owner of the VFP state for a particular thread t, two things must be true: vfp_current_hw_state[cpu] == &t->vfpstate && t->vfpstate.hard.cpu == cpu. and that is valid from the moment a CPU loads the saved VFP context into the hardware. This gives clear and consistent semantics to interpreting these variables. This patch also fixes thread copying, ensuring that t->vfpstate.hard.cpu is invalidated, otherwise CPU0 may believe it was the last owner. The hole can happen thus: - thread1 runs on CPU2 using VFP, migrates to CPU3, exits and thread_info freed. - New thread allocated from a previously running thread on CPU2, reusing memory for thread1 and copying vfp.hard.cpu. At this point, the following are true: new_thread1->vfpstate.hard.cpu == 2 &new_thread1->vfpstate == vfp_current_hw_state[2] Lastly, this also addresses thread flushing in a similar way to thread copying. Hole is: - thread runs on CPU0, using VFP, migrates to CPU1 but does not use VFP. - thread calls execve(), so thread flush happens, leaving vfp_current_hw_state[0] intact. This vfpstate is memset to 0 causing thread->vfpstate.hard.cpu = 0. - thread migrates back to CPU0 before using VFP. At this point, the following are true: thread->vfpstate.hard.cpu == 0 &thread->vfpstate == vfp_current_hw_state[0] Signed-off-by: Russell King diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 927522c..16baba2 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -59,6 +59,9 @@ int main(void) DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); +#ifdef CONFIG_SMP + DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu)); +#endif #ifdef CONFIG_ARM_THUMBEE DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state)); #endif diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 404538a..2d30c7f 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -82,19 +82,22 @@ ENTRY(vfp_support_entry) ldr r4, [r3, r11, lsl #2] @ vfp_current_hw_state pointer bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled cmp r4, r10 @ this thread owns the hw context? +#ifndef CONFIG_SMP + @ For UP, checking that this thread owns the hw context is + @ sufficient to determine that the hardware state is valid. beq vfp_hw_state_valid + @ On UP, we lazily save the VFP context. As a different + @ thread wants ownership of the VFP hardware, save the old + @ state if there was a previous (valid) owner. + VFPFMXR FPEXC, r5 @ enable VFP, disable any pending @ exceptions, so we can get at the @ rest of it -#ifndef CONFIG_SMP - @ Save out the current registers to the old thread state - @ No need for SMP since this is not done lazily - DBGSTR1 "save old state %p", r4 - cmp r4, #0 - beq no_old_VFP_process + cmp r4, #0 @ if the vfp_current_hw_state is NULL + beq vfp_reload_hw @ then the hw state needs reloading VFPFSTMIA r4, r5 @ save the working registers VFPFMRX r5, FPSCR @ current status #ifndef CONFIG_CPU_FEROCEON @@ -107,11 +110,33 @@ ENTRY(vfp_support_entry) 1: #endif stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 - @ and point r4 at the word at the - @ start of the register dump +vfp_reload_hw: + +#else + @ For SMP, if this thread does not own the hw context, then we + @ need to reload it. No need to save the old state as on SMP, + @ we always save the state when we switch away from a thread. + bne vfp_reload_hw + + @ This thread has ownership of the current hardware context. + @ However, it may have been migrated to another CPU, in which + @ case the saved state is newer than the hardware context. + @ Check this by looking at the CPU number which the state was + @ last loaded onto. + ldr ip, [r10, #VFP_CPU] + teq ip, r11 + beq vfp_hw_state_valid + +vfp_reload_hw: + @ We're loading this threads state into the VFP hardware. Update + @ the CPU number which contains the most up to date VFP context. + str r11, [r10, #VFP_CPU] + + VFPFMXR FPEXC, r5 @ enable VFP, disable any pending + @ exceptions, so we can get at the + @ rest of it #endif -no_old_VFP_process: DBGSTR1 "load state %p", r10 str r10, [r3, r11, lsl #2] @ update the vfp_current_hw_state pointer @ Load the saved state back into the VFP diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 36403511..08ff93f 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -35,18 +35,51 @@ void vfp_null_entry(void); void (*vfp_vector)(void) = vfp_null_entry; /* + * Dual-use variable. + * Used in startup: set to non-zero if VFP checks fail + * After startup, holds VFP architecture + */ +unsigned int VFP_arch; + +/* * The pointer to the vfpstate structure of the thread which currently * owns the context held in the VFP hardware, or NULL if the hardware * context is invalid. + * + * For UP, this is sufficient to tell which thread owns the VFP context. + * However, for SMP, we also need to check the CPU number stored in the + * saved state too to catch migrations. */ union vfp_state *vfp_current_hw_state[NR_CPUS]; /* - * Dual-use variable. - * Used in startup: set to non-zero if VFP checks fail - * After startup, holds VFP architecture + * Is 'thread's most up to date state stored in this CPUs hardware? + * Must be called from non-preemptible context. */ -unsigned int VFP_arch; +static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread) +{ +#ifdef CONFIG_SMP + if (thread->vfpstate.hard.cpu != cpu) + return false; +#endif + return vfp_current_hw_state[cpu] == &thread->vfpstate; +} + +/* + * Force a reload of the VFP context from the thread structure. We do + * this by ensuring that access to the VFP hardware is disabled, and + * clear last_VFP_context. Must be called from non-preemptible context. + */ +static void vfp_force_reload(unsigned int cpu, struct thread_info *thread) +{ + if (vfp_state_in_hw(cpu, thread)) { + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + vfp_current_hw_state[cpu] = NULL; + } +#ifdef CONFIG_SMP + thread->vfpstate.hard.cpu = NR_CPUS; +#endif +} /* * Per-thread VFP initialization. @@ -60,6 +93,9 @@ static void vfp_thread_flush(struct thread_info *thread) vfp->hard.fpexc = FPEXC_EN; vfp->hard.fpscr = FPSCR_ROUND_NEAREST; +#ifdef CONFIG_SMP + vfp->hard.cpu = NR_CPUS; +#endif /* * Disable VFP to ensure we initialize it first. We must ensure @@ -90,6 +126,9 @@ static void vfp_thread_copy(struct thread_info *thread) vfp_sync_hwstate(parent); thread->vfpstate = parent->vfpstate; +#ifdef CONFIG_SMP + thread->vfpstate.hard.cpu = NR_CPUS; +#endif } /* @@ -135,17 +174,8 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * case the thread migrates to a different CPU. The * restoring is done lazily. */ - if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) { + if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) vfp_save_state(vfp_current_hw_state[cpu], fpexc); - vfp_current_hw_state[cpu]->hard.cpu = cpu; - } - /* - * Thread migration, just force the reloading of the - * state on the new CPU in case the VFP registers - * contain stale data. - */ - if (thread->vfpstate.hard.cpu != cpu) - vfp_current_hw_state[cpu] = NULL; #endif /* @@ -449,15 +479,15 @@ static void vfp_pm_init(void) static inline void vfp_pm_init(void) { } #endif /* CONFIG_PM */ +/* + * Ensure that the VFP state stored in 'thread->vfpstate' is up to date + * with the hardware state. + */ void vfp_sync_hwstate(struct thread_info *thread) { unsigned int cpu = get_cpu(); - /* - * If the thread we're interested in is the current owner of the - * hardware VFP state, then we need to save its state. - */ - if (vfp_current_hw_state[cpu] == &thread->vfpstate) { + if (vfp_state_in_hw(cpu, thread)) { u32 fpexc = fmrx(FPEXC); /* @@ -471,36 +501,13 @@ void vfp_sync_hwstate(struct thread_info *thread) put_cpu(); } +/* Ensure that the thread reloads the hardware VFP state on the next use. */ void vfp_flush_hwstate(struct thread_info *thread) { unsigned int cpu = get_cpu(); - /* - * If the thread we're interested in is the current owner of the - * hardware VFP state, then we need to save its state. - */ - if (vfp_current_hw_state[cpu] == &thread->vfpstate) { - u32 fpexc = fmrx(FPEXC); + vfp_force_reload(cpu, thread); - fmxr(FPEXC, fpexc & ~FPEXC_EN); - - /* - * Set the context to NULL to force a reload the next time - * the thread uses the VFP. - */ - vfp_current_hw_state[cpu] = NULL; - } - -#ifdef CONFIG_SMP - /* - * For SMP we still have to take care of the case where the thread - * migrates to another CPU and then back to the original CPU on which - * the last VFP user is still the same thread. Mark the thread VFP - * state as belonging to a non-existent CPU so that the saved one will - * be reloaded in the above case. - */ - thread->vfpstate.hard.cpu = NR_CPUS; -#endif put_cpu(); } @@ -519,8 +526,7 @@ static int vfp_hotplug(struct notifier_block *b, unsigned long action, void *hcpu) { if (action == CPU_DYING || action == CPU_DYING_FROZEN) { - unsigned int cpu = (long)hcpu; - vfp_current_hw_state[cpu] = NULL; + vfp_force_reload((long)hcpu, current_thread_info()); } else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) vfp_enable(NULL); return NOTIFY_OK; -- cgit v0.10.2 From 19dad35fe0f10df8f0524f98037469e3a0dd1ec2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 9 Jul 2011 17:41:33 +0100 Subject: ARM: vfp: ensure that thread flushing works if preempted Prevent a preemption event causing the initialized VFP state being overwritten by ensuring that the VFP hardware access is disabled prior to starting initialization. We can then do this in safety while still allowing preemption to occur. Signed-off-by: Russell King diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 08ff93f..0a96f71 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -89,24 +89,27 @@ static void vfp_thread_flush(struct thread_info *thread) union vfp_state *vfp = &thread->vfpstate; unsigned int cpu; - memset(vfp, 0, sizeof(union vfp_state)); - - vfp->hard.fpexc = FPEXC_EN; - vfp->hard.fpscr = FPSCR_ROUND_NEAREST; -#ifdef CONFIG_SMP - vfp->hard.cpu = NR_CPUS; -#endif - /* * Disable VFP to ensure we initialize it first. We must ensure - * that the modification of vfp_current_hw_state[] and hardware disable - * are done for the same CPU and without preemption. + * that the modification of vfp_current_hw_state[] and hardware + * disable are done for the same CPU and without preemption. + * + * Do this first to ensure that preemption won't overwrite our + * state saving should access to the VFP be enabled at this point. */ cpu = get_cpu(); if (vfp_current_hw_state[cpu] == vfp) vfp_current_hw_state[cpu] = NULL; fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); put_cpu(); + + memset(vfp, 0, sizeof(union vfp_state)); + + vfp->hard.fpexc = FPEXC_EN; + vfp->hard.fpscr = FPSCR_ROUND_NEAREST; +#ifdef CONFIG_SMP + vfp->hard.cpu = NR_CPUS; +#endif } static void vfp_thread_exit(struct thread_info *thread) -- cgit v0.10.2 From 20547490c12b0ee3d32152b85e9f9bd183aa7224 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 9 Jul 2011 12:21:07 -0400 Subject: cifs: move bdi_setup_and_register outside of CONFIG_CIFS_DFS_UPCALL This needs to be done regardless of whether that KConfig option is set or not. Reported-by: Sven-Haegar Koch Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 46cc0ad..5111769 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3002,6 +3002,7 @@ cifs_mount(struct cifs_sb_info *cifs_sb, struct smb_vol *volume_info) struct tcon_link *tlink; #ifdef CONFIG_CIFS_DFS_UPCALL int referral_walks_count = 0; +#endif rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY); if (rc) @@ -3009,6 +3010,7 @@ cifs_mount(struct cifs_sb_info *cifs_sb, struct smb_vol *volume_info) cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages; +#ifdef CONFIG_CIFS_DFS_UPCALL try_mount_again: /* cleanup activities if we're chasing a referral */ if (referral_walks_count) { -- cgit v0.10.2 From b9bce2e9f9936cfd12fbc62ead11edcdd46dec7e Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 6 Jul 2011 08:10:39 -0400 Subject: cifs: fix expand_dfs_referral Regression introduced in commit 724d9f1cfba. Prior to that, expand_dfs_referral would regenerate the mount data string and then call cifs_parse_mount_options to re-parse it (klunky, but it worked). The above commit moved cifs_parse_mount_options out of cifs_mount, so the re-parsing of the new mount options no longer occurred. Fix it by making expand_dfs_referral re-parse the mount options. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 5111769..6ec366ff 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -65,6 +65,8 @@ static int ip_connect(struct TCP_Server_Info *server); static int generic_ip_connect(struct TCP_Server_Info *server); static void tlink_rb_insert(struct rb_root *root, struct tcon_link *new_tlink); static void cifs_prune_tlinks(struct work_struct *work); +static int cifs_setup_volume_info(struct smb_vol *volume_info, char *mount_data, + const char *devname); /* * cifs tcp session reconnection @@ -2830,12 +2832,9 @@ is_path_accessible(int xid, struct cifs_tcon *tcon, return rc; } -void -cifs_cleanup_volume_info(struct smb_vol *volume_info) +static void +cleanup_volume_info_contents(struct smb_vol *volume_info) { - if (!volume_info) - return; - kfree(volume_info->username); kzfree(volume_info->password); kfree(volume_info->UNC); @@ -2843,10 +2842,18 @@ cifs_cleanup_volume_info(struct smb_vol *volume_info) kfree(volume_info->domainname); kfree(volume_info->iocharset); kfree(volume_info->prepath); +} + +void +cifs_cleanup_volume_info(struct smb_vol *volume_info) +{ + if (!volume_info) + return; + cleanup_volume_info_contents(volume_info); kfree(volume_info); - return; } + #ifdef CONFIG_CIFS_DFS_UPCALL /* build_path_to_root returns full path to root when * we do not have an exiting connection (tcon) */ @@ -2915,15 +2922,18 @@ expand_dfs_referral(int xid, struct cifs_ses *pSesInfo, &fake_devname); free_dfs_info_array(referrals, num_referrals); - kfree(fake_devname); - - if (cifs_sb->mountdata != NULL) - kfree(cifs_sb->mountdata); if (IS_ERR(mdata)) { rc = PTR_ERR(mdata); mdata = NULL; + } else { + cleanup_volume_info_contents(volume_info); + memset(volume_info, '\0', sizeof(*volume_info)); + rc = cifs_setup_volume_info(volume_info, mdata, + fake_devname); } + kfree(fake_devname); + kfree(cifs_sb->mountdata); cifs_sb->mountdata = mdata; } kfree(full_path); -- cgit v0.10.2 From 7f7e37115a8b6724f26d0637a04e1d35e3c59717 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 10 Jul 2011 00:23:03 +0200 Subject: firewire: ohci: do not bind to Pinnacle cards, avert panic When firewire-ohci is bound to a Pinnacle MovieBoard, eventually a "Register access failure" is logged and an interrupt storm or a kernel panic happens. https://bugzilla.kernel.org/show_bug.cgi?id=36622 Until this is sorted out (if that is going to succeed at all), let's just prevent firewire-ohci from touching these devices. Signed-off-by: Stefan Richter Cc: diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 438e6c8..ebb8973 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -264,6 +264,7 @@ static char ohci_driver_name[] = KBUILD_MODNAME; #define PCI_DEVICE_ID_AGERE_FW643 0x5901 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380 #define PCI_DEVICE_ID_TI_TSB12LV22 0x8009 +#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd #define QUIRK_CYCLE_TIMER 1 #define QUIRK_RESET_PACKET 2 @@ -3190,6 +3191,11 @@ static int __devinit pci_probe(struct pci_dev *dev, int i, err; size_t size; + if (dev->vendor == PCI_VENDOR_ID_PINNACLE_SYSTEMS) { + dev_err(&dev->dev, "Pinnacle MovieBoard is not yet supported\n"); + return -ENOSYS; + } + ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); if (ohci == NULL) { err = -ENOMEM; -- cgit v0.10.2 From ff1817749f0405c019420fcb415ad20fedec7884 Mon Sep 17 00:00:00 2001 From: Jim Cromie Date: Sun, 10 Jul 2011 07:07:40 -0700 Subject: natsemi: fix another dma-debug report commit 2fb83cd618be34546fb526a9051eceaa95517026 Author: FUJITA Tomonori Date: Sun Jul 3 22:34:29 2011 -0700 Above commit fixed previously reported warning, but I later noticed another one at shutdown. This commit fixes it. ------------[ cut here ]------------ WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820 check_unmap+0x1fe/0x56c() natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with different size [device address=0x0000000007356840] [map size=1538 bytes] [unmap size=1522 bytes] Modules linked in: bridge stp llc x_tables ipv6 pc87360 hwmon_vid scx200_hrt pc8736x_gpio scx200_gpio nsc_gpio scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6 cfg80211 pcspkr scx200 rfkill ide_gd_mod ide_pci_generic ohci_hcd usbcore sc1200 ide_core [last unloaded: ebtables] Pid: 3996, comm: ifconfig Not tainted 3.0.0-rc6-skc-dyndbg+ #104 Call Trace: [] warn_slowpath_common+0x4a/0x5f [] ? check_unmap+0x1fe/0x56c [] warn_slowpath_fmt+0x26/0x2a [] check_unmap+0x1fe/0x56c [] ? check_preempt_curr+0x5a/0x6a [] debug_dma_unmap_page+0x53/0x5b [] pci_unmap_single+0x4d/0x57 [] drain_rx+0x4e/0x74 [] netdev_close+0x103/0x1b8 [] ? spin_unlock_bh.clone.30+0x12/0x14 [] ? dev_deactivate_many+0xc1/0xef [] __dev_close_many+0x69/0x86 [] __dev_close+0x1f/0x2c [] __dev_change_flags+0x92/0x107 [] dev_change_flags+0x13/0x3f [] devinet_ioctl+0x248/0x4b3 [] ? dev_ioctl+0x50a/0x54c [] inet_ioctl+0x8e/0xa7 [] sock_ioctl+0x1b6/0x1da [] ? sock_fasync+0x61/0x61 [] do_vfs_ioctl+0x44d/0x47f [] ? do_page_fault+0x268/0x299 [] ? __put_cred+0x34/0x36 [] ? sys_faccessat+0x13e/0x14b [] sys_ioctl+0x2e/0x4a [] syscall_call+0x7/0xb ---[ end trace 7013a1bdac403e56 ]--- Signed-off-by: Jim Cromie Signed-off-by: David S. Miller diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 1f0a833..60f46bc 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -2028,8 +2028,8 @@ static void drain_rx(struct net_device *dev) np->rx_ring[i].cmd_status = 0; np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ if (np->rx_skbuff[i]) { - pci_unmap_single(np->pci_dev, - np->rx_dma[i], buflen, + pci_unmap_single(np->pci_dev, np->rx_dma[i], + buflen + NATSEMI_PADDING, PCI_DMA_FROMDEVICE); dev_kfree_skb(np->rx_skbuff[i]); } -- cgit v0.10.2 From 0c2a40e2fe4f4af0410f57e84b95b817ec15aa70 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 30 Jun 2011 02:09:37 -0700 Subject: hwmon: (lm95241) Fix negative temperature results Negative temperatures were returned in degrees C instead of milli-Degrees C. Also, negative temperatures were reported for remote temperature sensors even if the chip was configured for positive-only results. Fix by detecting temperature modes, and by treating negative temperatures similar to positive temperatures, with appropriate sign extension. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Cc: stable@kernel.org # 2.6.30+ diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index 01c638e..d3b464b 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -98,11 +98,16 @@ struct lm95241_data { }; /* Conversions */ -static int TempFromReg(u8 val_h, u8 val_l) +static int temp_from_reg_signed(u8 val_h, u8 val_l) { - if (val_h & 0x80) - return val_h - 0x100; - return val_h * 1000 + val_l * 1000 / 256; + s16 val_hl = (val_h << 8) | val_l; + return val_hl * 1000 / 256; +} + +static int temp_from_reg_unsigned(u8 val_h, u8 val_l) +{ + u16 val_hl = (val_h << 8) | val_l; + return val_hl * 1000 / 256; } static struct lm95241_data *lm95241_update_device(struct device *dev) @@ -135,10 +140,13 @@ static ssize_t show_input(struct device *dev, struct device_attribute *attr, char *buf) { struct lm95241_data *data = lm95241_update_device(dev); + int index = to_sensor_dev_attr(attr)->index; return snprintf(buf, PAGE_SIZE - 1, "%d\n", - TempFromReg(data->temp[to_sensor_dev_attr(attr)->index], - data->temp[to_sensor_dev_attr(attr)->index + 1])); + index == 0 || (data->config & (1 << (index / 2))) ? + temp_from_reg_signed(data->temp[index], data->temp[index + 1]) : + temp_from_reg_unsigned(data->temp[index], + data->temp[index + 1])); } static ssize_t show_type(struct device *dev, struct device_attribute *attr, -- cgit v0.10.2 From 22e6b2312d221376dcd98a8afb0f314b62d33a91 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 3 Jul 2011 13:08:03 -0700 Subject: hwmon: (pmbus) Improve auto-detection of temperature status register It is possible that a PMBus device supports the READ_TEMPERATURE2 and/or READ_TEMPERATURE3 registers but does not support READ_TEMPERATURE1. Improve temperature status register detection to address this condition. Reported-by: Jean Delvare Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Cc: stable@kernel.org # 2.6.39+ diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus.c index 931d940..9b1f0c3 100644 --- a/drivers/hwmon/pmbus.c +++ b/drivers/hwmon/pmbus.c @@ -59,16 +59,17 @@ static void pmbus_find_sensor_groups(struct i2c_client *client, if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) info->func[0] |= PMBUS_HAVE_STATUS_FAN34; } - if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) { + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) info->func[0] |= PMBUS_HAVE_TEMP; - if (pmbus_check_byte_register(client, 0, - PMBUS_STATUS_TEMPERATURE)) - info->func[0] |= PMBUS_HAVE_STATUS_TEMP; - } if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) info->func[0] |= PMBUS_HAVE_TEMP2; if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) info->func[0] |= PMBUS_HAVE_TEMP3; + if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3) + && pmbus_check_byte_register(client, 0, + PMBUS_STATUS_TEMPERATURE)) + info->func[0] |= PMBUS_HAVE_STATUS_TEMP; /* Sensors detected on all pages */ for (page = 0; page < info->pages; page++) { -- cgit v0.10.2 From 50f4ddd4ff713d2599e2f246775fe2206090126e Mon Sep 17 00:00:00 2001 From: Luming Yu Date: Fri, 8 Jul 2011 16:37:44 -0400 Subject: [CPUFREQ] fix cpumask memory leak in acpi-cpufreq on cpu hotplug. I came across a memory leak during a cyclic cpu-online-offline test. Signed-off-by: Yu Luming Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 4e04e12..596d5dd 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -759,7 +759,7 @@ static void __exit acpi_cpufreq_exit(void) cpufreq_unregister_driver(&acpi_cpufreq_driver); - free_percpu(acpi_perf_data); + free_acpi_perf_data(); } module_param(acpi_pstate_strict, uint, 0644); -- cgit v0.10.2 From a065685d2f0b4bb69d0f64d2cd396a5c463db2a9 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 13 Jun 2011 10:42:19 +0200 Subject: ARM: pxa: fix gpio_to_chip() clash with gpiolib namespace The PXA platform code has a static inline helper called gpio_to_chip which clashes with the gpiolib namespace if we try to expose the function with the same name from gpiolib, and it's still confusing even if we don't do that. So rename it to gpio_to_pxachip(). Reported-by: H Hartley Sweeten Cc: Eric Miao Signed-off-by: Linus Walleij Signed-off-by: Eric Miao diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index 48ebb94..a11dc36 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -50,7 +50,7 @@ static inline void __iomem *gpio_chip_base(struct gpio_chip *c) return container_of(c, struct pxa_gpio_chip, chip)->regbase; } -static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio) +static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio) { return &pxa_gpio_chips[gpio_to_bank(gpio)]; } @@ -161,7 +161,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) int gpio = irq_to_gpio(d->irq); unsigned long gpdr, mask = GPIO_bit(gpio); - c = gpio_to_chip(gpio); + c = gpio_to_pxachip(gpio); if (type == IRQ_TYPE_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or @@ -230,7 +230,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) static void pxa_ack_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); } @@ -238,7 +238,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d) static void pxa_mask_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); uint32_t grer, gfer; c->irq_mask &= ~GPIO_bit(gpio); @@ -252,7 +252,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d) static void pxa_unmask_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); c->irq_mask |= GPIO_bit(gpio); update_edge_detect(c); -- cgit v0.10.2 From 8c568df9d7e9b40063f0a5d4235e3d28df88f92a Mon Sep 17 00:00:00 2001 From: Sven Neumann Date: Wed, 25 May 2011 13:37:31 +0200 Subject: ARM: pxa/raumfeld: adapt to upcoming hardware change The backlight control is going to change back to PWM in the upcoming Raumfeld Controller hardware revision. Signed-off-by: Sven Neumann Acked-by: Daniel Mack Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index d130f77..8e5b3d8 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -598,14 +598,15 @@ static void __init raumfeld_lcd_init(void) pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); - /* Earlier devices had the backlight regulator controlled - * via PWM, later versions use another controller for that */ - if ((system_rev & 0xff) < 2) { + /* Hardware revision 2 has the backlight regulator controlled + * by an LT3593, earlier and later devices use PWM for that. */ + if ((system_rev & 0xff) == 2) { + platform_device_register(&raumfeld_lt3593_device); + } else { mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); platform_device_register(&raumfeld_pwm_backlight_device); - } else - platform_device_register(&raumfeld_lt3593_device); + } ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); if (ret < 0) -- cgit v0.10.2 From a74fe1194b8da1dcee7529ba14999381bb9c25d9 Mon Sep 17 00:00:00 2001 From: Sven Neumann Date: Wed, 25 May 2011 13:37:32 +0200 Subject: ARM: pxa/raumfeld: display initialisation fixes The display requires some milliseconds between GPIO_TFT_VA_EN and GPIO_DISPLAY_ENABLE. Reorder initialisation to comply with the display spec. Also tune timings for better compliance with the spec. Signed-off-by: Sven Neumann Acked-by: Daniel Mack Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 8e5b3d8..9caa5e5 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = { .xres = 480, .yres = 272, .bpp = 16, - .hsync_len = 4, + .hsync_len = 41, .left_margin = 2, .right_margin = 1, - .vsync_len = 1, + .vsync_len = 10, .upper_margin = 3, .lower_margin = 1, .sync = 0, @@ -596,30 +596,31 @@ static void __init raumfeld_lcd_init(void) { int ret; - pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); - - /* Hardware revision 2 has the backlight regulator controlled - * by an LT3593, earlier and later devices use PWM for that. */ - if ((system_rev & 0xff) == 2) { - platform_device_register(&raumfeld_lt3593_device); - } else { - mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; - pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); - platform_device_register(&raumfeld_pwm_backlight_device); - } - ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); if (ret < 0) pr_warning("Unable to request GPIO_TFT_VA_EN\n"); else gpio_direction_output(GPIO_TFT_VA_EN, 1); + msleep(100); + ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); if (ret < 0) pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); else gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); + /* Hardware revision 2 has the backlight regulator controlled + * by an LT3593, earlier and later devices use PWM for that. */ + if ((system_rev & 0xff) == 2) { + platform_device_register(&raumfeld_lt3593_device); + } else { + mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; + pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + platform_device_register(&raumfeld_pwm_backlight_device); + } + + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); platform_device_register(&pxa3xx_device_gcu); } -- cgit v0.10.2 From 9c0de4947a44166b16f189aa56f34791e9d7f552 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 May 2011 13:37:33 +0200 Subject: ARM: pxa/raumfeld: fix device name for codec ak4104 In commit f0fba2ad (ASoC: multi-component - ASoC Multi-Component Support), the name of the ak4104 codec driver was changed without amending the platform code which uses it as well. Signed-off-by: Daniel Mack Signed-off-by: Eric Miao diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 9caa5e5..2f37d43 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -659,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = { #define SPI_AK4104 \ { \ - .modalias = "ak4104", \ - .max_speed_hz = 10000, \ - .bus_num = 0, \ - .chip_select = 0, \ + .modalias = "ak4104-codec", \ + .max_speed_hz = 10000, \ + .bus_num = 0, \ + .chip_select = 0, \ .controller_data = (void *) GPIO_SPDIF_CS, \ } -- cgit v0.10.2 From 512b7938fefd03d512463aa597a1216cf088dfe3 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 6 Jun 2011 15:24:13 +0100 Subject: pcmcia: pxa2xx/vpac270: free gpios on exist rather than requesting Signed-off-by: Jonathan Cameron Acked-by: Marek Vasut Signed-off-by: Eric Miao diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c index 712baab..e956f65 100644 --- a/drivers/pcmcia/pxa2xx_vpac270.c +++ b/drivers/pcmcia/pxa2xx_vpac270.c @@ -76,10 +76,10 @@ static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt) static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { if (skt->nr == 0) - gpio_request_array(vpac270_pcmcia_gpios, + gpio_free_array(vpac270_pcmcia_gpios, ARRAY_SIZE(vpac270_pcmcia_gpios)); else - gpio_request_array(vpac270_cf_gpios, + gpio_free_array(vpac270_cf_gpios, ARRAY_SIZE(vpac270_cf_gpios)); } -- cgit v0.10.2 From 887596224cca4dc4669c53e4d7a33fcfc9d9e823 Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Mon, 11 Jul 2011 10:51:49 +0200 Subject: PM: Reintroduce dropped call to check_wakeup_irqs Patch 2e711c04dbbf7a7732a3f7073b1fc285d12b369d (PM: Remove sysdev suspend, resume and shutdown operations) deleted sysdev_suspend(), which was being relied on to call check_wakeup_irqs() in suspend. If check_wakeup_irqs() is not called, wake interrupts that are pending when suspend is entered may be lost. It also breaks IRQCHIP_MASK_ON_SUSPEND, which is handled in check_wakeup_irqs(). This patch adds a call to check_wakeup_irqs() in syscore_suspend(), similar to what was deleted in sysdev_suspend(). Signed-off-by: Colin Cross Signed-off-by: Rafael J. Wysocki diff --git a/drivers/base/syscore.c b/drivers/base/syscore.c index c126db3..e8d11b6 100644 --- a/drivers/base/syscore.c +++ b/drivers/base/syscore.c @@ -9,6 +9,7 @@ #include #include #include +#include static LIST_HEAD(syscore_ops_list); static DEFINE_MUTEX(syscore_ops_lock); @@ -48,6 +49,13 @@ int syscore_suspend(void) struct syscore_ops *ops; int ret = 0; + pr_debug("Checking wakeup interrupts\n"); + + /* Return error code if there are any wakeup interrupts pending. */ + ret = check_wakeup_irqs(); + if (ret) + return ret; + WARN_ONCE(!irqs_disabled(), "Interrupts enabled before system core suspend.\n"); -- cgit v0.10.2 From be65dde82a4a402e9607c2f306f343bf0912623c Mon Sep 17 00:00:00 2001 From: Keng-Yu Lin Date: Mon, 27 Jun 2011 11:19:03 +0100 Subject: Revert: "dell-laptop: Toggle the unsupported hardware killswitch" This reverts commit a3d77411e8b2ad661958c1fbee65beb476ec6d70, as it causes a mess in the wireless rfkill status on some models. It is probably a bad idea to toggle the rfkill for all dell models without the respect to the claim that it is hardware-controlled. Cc: stable@kernel.org Signed-off-by: Keng-Yu Lin Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index d3841de..04c34f1 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -292,12 +292,9 @@ static int dell_rfkill_set(void *data, bool blocked) dell_send_request(buffer, 17, 11); /* If the hardware switch controls this radio, and the hardware - switch is disabled, don't allow changing the software state. - If the hardware switch is reported as not supported, always - fire the SMI to toggle the killswitch. */ + switch is disabled, don't allow changing the software state */ if ((hwswitch_state & BIT(hwswitch_bit)) && - !(buffer->output[1] & BIT(16)) && - (buffer->output[1] & BIT(0))) { + !(buffer->output[1] & BIT(16))) { ret = -EINVAL; goto out; } @@ -403,23 +400,6 @@ static const struct file_operations dell_debugfs_fops = { static void dell_update_rfkill(struct work_struct *ignored) { - int status; - - get_buffer(); - dell_send_request(buffer, 17, 11); - status = buffer->output[1]; - release_buffer(); - - /* if hardware rfkill is not supported, set it explicitly */ - if (!(status & BIT(0))) { - if (wifi_rfkill) - dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17)); - if (bluetooth_rfkill) - dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18)); - if (wwan_rfkill) - dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19)); - } - if (wifi_rfkill) dell_rfkill_query(wifi_rfkill, (void *)1); if (bluetooth_rfkill) -- cgit v0.10.2 From b486742a12a474a01d1acb1a5924af11d9b32b68 Mon Sep 17 00:00:00 2001 From: Jose Alonso Date: Sun, 10 Jul 2011 15:46:51 -0300 Subject: dell-laptop - using buffer without mutex_lock Using buffer->output[1] without mutex_lock() Signed-off-by: Jose Alonso Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index 04c34f1..e39ab1d 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -540,11 +540,11 @@ static int dell_get_intensity(struct backlight_device *bd) else dell_send_request(buffer, 0, 1); + ret = buffer->output[1]; + out: release_buffer(); - if (ret) - return ret; - return buffer->output[1]; + return ret; } static const struct backlight_ops dell_ops = { -- cgit v0.10.2 From 0401846c339fbdfb9bd822d83b43e8a9f7d072a4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 11 Jul 2011 12:22:21 +0200 Subject: hp-wmi: fix use after free [ 191.310008] WARNING: kmemcheck: Caught 32-bit read from freed memory (f0d25f14) [ 191.310011] c056d2f088000000105fd2f00000000050415353040000000000000000000000 [ 191.310020] i i i i f f f f f f f f f f f f f f f f f f f f f f f f f f f f [ 191.310027] ^ [ 191.310029] [ 191.310032] Pid: 737, comm: modprobe Not tainted 3.0.0-rc5+ #268 Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h [ 191.310036] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [ 191.310039] EIP is at hp_wmi_perform_query+0x104/0x150 [hp_wmi] [ 191.310041] EAX: f0d25601 EBX: f0d25f00 ECX: 000121cf EDX: 000121ce [ 191.310043] ESI: f0d25f10 EDI: f0f97ea8 EBP: f0f97ec4 ESP: c173f34c [ 191.310045] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 191.310046] CR0: 8005003b CR2: f540c000 CR3: 30f30000 CR4: 000006d0 [ 191.310048] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 191.310050] DR6: ffff4ff0 DR7: 00000400 [ 191.310051] [] hp_wmi_dock_state+0x2b/0x40 [hp_wmi] [ 191.310054] [] hp_wmi_init+0x93/0x1a8 [hp_wmi] [ 191.310057] [] do_one_initcall+0x30/0x170 [ 191.310061] [] sys_init_module+0xef/0x1a60 [ 191.310064] [] sysenter_do_call+0x12/0x28 [ 191.310067] [] 0xffffffff Signed-off-by: Eric Dumazet Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index f94017b..e2faa3c 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -207,6 +207,7 @@ static int hp_wmi_perform_query(int query, int write, void *buffer, }; struct acpi_buffer input = { sizeof(struct bios_args), &args }; struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + u32 rc; if (WARN_ON(insize > sizeof(args.data))) return -EINVAL; @@ -224,13 +225,13 @@ static int hp_wmi_perform_query(int query, int write, void *buffer, } bios_return = (struct bios_return *)obj->buffer.pointer; + rc = bios_return->return_code; - if (bios_return->return_code) { - if (bios_return->return_code != HPWMI_RET_UNKNOWN_CMDTYPE) - pr_warn("query 0x%x returned error 0x%x\n", - query, bios_return->return_code); + if (rc) { + if (rc != HPWMI_RET_UNKNOWN_CMDTYPE) + pr_warn("query 0x%x returned error 0x%x\n", query, rc); kfree(obj); - return bios_return->return_code; + return rc; } if (!outsize) { -- cgit v0.10.2 From 5da0ef9a8554a8d03dc880a53f213289fe7b576d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 11 Jul 2011 10:34:32 +0200 Subject: x86: Disable AMD_NUMA for 32bit for now Commit 2706a0bf7b ("x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too") enabled AMD NUMA for 32bit too. Unfortunately, SPARSEMEM on 32bit had rather coarse (512MiB) addr->node mapping granularity due to lack of space in page->flags. This led to boot failure on certain AMD NUMA machines which had 128MiB alignment on nodes. Patches to properly detect this condition and reject NUMA configuration are posted[1] but deemed too pervasive for merge at this point (-rc6). Disable AMD NUMA for 32bit for now and re-enable once the detection logic is merged. [1] http://thread.gmane.org/gmane.linux.kernel/1161279/focus=1162583 Reported-by: Hans Rosenfeld Signed-off-by: Tejun Heo Cc: Conny Seidel Link: http://lkml.kernel.org/r/20110711083432.GC943@htj.dyndns.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index da34972..37357a5 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1170,7 +1170,7 @@ comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" config AMD_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" - depends on NUMA && PCI + depends on X86_64 && NUMA && PCI ---help--- Enable AMD NUMA node topology detection. You should say Y here if you have a multi processor AMD system. This uses an old method to -- cgit v0.10.2 From f484b5d001a972a42129570e98086a2a6d216ce0 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 11 Jul 2011 10:16:34 -0400 Subject: cifs: drop spinlock before calling cifs_put_tlink ...as that function can sleep. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 6ec366ff..dbd669c 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2242,8 +2242,8 @@ cifs_match_super(struct super_block *sb, void *data) rc = compare_mount_options(sb, mnt_data); out: - cifs_put_tlink(tlink); spin_unlock(&cifs_tcp_ses_lock); + cifs_put_tlink(tlink); return rc; } -- cgit v0.10.2 From 05801817845b308e1cf0fb8e2700b15dab79afc5 Mon Sep 17 00:00:00 2001 From: Muthu Kumar Date: Mon, 11 Jul 2011 11:04:58 -0700 Subject: Documentation/spinlocks.txt: Remove reference to sti()/cli() Since we removed sti()/cli() and related, how about removing it from Documentation/spinlocks.txt? Signed-off-by: Muthukumar R Signed-off-by: Linus Torvalds diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt index 2e3c64b..9dbe885 100644 --- a/Documentation/spinlocks.txt +++ b/Documentation/spinlocks.txt @@ -13,18 +13,8 @@ static DEFINE_SPINLOCK(xxx_lock); The above is always safe. It will disable interrupts _locally_, but the spinlock itself will guarantee the global lock, so it will guarantee that there is only one thread-of-control within the region(s) protected by that -lock. This works well even under UP. The above sequence under UP -essentially is just the same as doing - - unsigned long flags; - - save_flags(flags); cli(); - ... critical section ... - restore_flags(flags); - -so the code does _not_ need to worry about UP vs SMP issues: the spinlocks -work correctly under both (and spinlocks are actually more efficient on -architectures that allow doing the "save_flags + cli" in one operation). +lock. This works well even under UP also, so the code does _not_ need to +worry about UP vs SMP issues: the spinlocks work correctly under both. NOTE! Implications of spin_locks for memory are further described in: @@ -36,27 +26,7 @@ The above is usually pretty simple (you usually need and want only one spinlock for most things - using more than one spinlock can make things a lot more complex and even slower and is usually worth it only for sequences that you _know_ need to be split up: avoid it at all cost if you -aren't sure). HOWEVER, it _does_ mean that if you have some code that does - - cli(); - .. critical section .. - sti(); - -and another sequence that does - - spin_lock_irqsave(flags); - .. critical section .. - spin_unlock_irqrestore(flags); - -then they are NOT mutually exclusive, and the critical regions can happen -at the same time on two different CPU's. That's fine per se, but the -critical regions had better be critical for different things (ie they -can't stomp on each other). - -The above is a problem mainly if you end up mixing code - for example the -routines in ll_rw_block() tend to use cli/sti to protect the atomicity of -their actions, and if a driver uses spinlocks instead then you should -think about issues like the above. +aren't sure). This is really the only really hard part about spinlocks: once you start using spinlocks they tend to expand to areas you might not have noticed @@ -120,11 +90,10 @@ Lesson 3: spinlocks revisited. The single spin-lock primitives above are by no means the only ones. They are the most safe ones, and the ones that work under all circumstances, -but partly _because_ they are safe they are also fairly slow. They are -much faster than a generic global cli/sti pair, but slower than they'd -need to be, because they do have to disable interrupts (which is just a -single instruction on a x86, but it's an expensive one - and on other -architectures it can be worse). +but partly _because_ they are safe they are also fairly slow. They are slower +than they'd need to be, because they do have to disable interrupts +(which is just a single instruction on a x86, but it's an expensive one - +and on other architectures it can be worse). If you have a case where you have to protect a data structure across several CPU's and you want to use spinlocks you can potentially use -- cgit v0.10.2 From 404ba3f029a53597928a20ce33351e77e3259840 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 10 Jul 2011 02:28:26 -0700 Subject: ath5k: Add missing breaks in switch/case Signed-off-by: Joe Perches Acked-by: Pavel Roskin Signed-off-by: Linus Torvalds diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 62172d5..f82383b 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -107,10 +107,13 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, case AR5K_PKT_TYPE_BEACON: case AR5K_PKT_TYPE_PROBE_RESP: frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + break; case AR5K_PKT_TYPE_PIFS: frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + break; default: frame_type = type; + break; } tx_ctl->tx_control_0 |= -- cgit v0.10.2 From e5012d1f3861d18c7f3814e757c1c3ab3741dbcd Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Mon, 11 Jul 2011 17:17:42 -0400 Subject: NFSv4.1: update nfs4_fattr_bitmap_maxsz Attribute IDs assigned in RFC 5661 now require three bitmaps. Fixes hitting a BUG_ON in xdr_shrink_bufhead when getting ACLs. Signed-off-by: Andy Adamson Cc:stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 6870bc6..e6e8f3b 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -91,7 +91,7 @@ static int nfs4_stat_to_errno(int); #define encode_getfh_maxsz (op_encode_hdr_maxsz) #define decode_getfh_maxsz (op_decode_hdr_maxsz + 1 + \ ((3+NFS4_FHSIZE) >> 2)) -#define nfs4_fattr_bitmap_maxsz 3 +#define nfs4_fattr_bitmap_maxsz 4 #define encode_getattr_maxsz (op_encode_hdr_maxsz + nfs4_fattr_bitmap_maxsz) #define nfs4_name_maxsz (1 + ((3 + NFS4_MAXNAMLEN) >> 2)) #define nfs4_path_maxsz (1 + ((3 + NFS4_MAXPATHLEN) >> 2)) -- cgit v0.10.2 From 5adaf851d2073c76bb98bc5cdb13d5754b7f0983 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 11 Jul 2011 16:48:38 -0700 Subject: Documentation/Changes: remove some really obsolete text That file harkens back to the days of the big 2.4 -> 2.6 version jump, and was based even then on older versions. Some of it is just obsolete, and Jesper Juhl points out that it talks about kernel versions 2.6 and should be updated to 3.0. Remove some obsolete text, and re-phrase some other to not be 2.6-specific. Reported-by: Jesper Juhl Signed-off-by: Linus Torvalds diff --git a/Documentation/Changes b/Documentation/Changes index 5f4828a0..b175808 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -2,13 +2,7 @@ Intro ===== This document is designed to provide a list of the minimum levels of -software necessary to run the 2.6 kernels, as well as provide brief -instructions regarding any other "Gotchas" users may encounter when -trying life on the Bleeding Edge. If upgrading from a pre-2.4.x -kernel, please consult the Changes file included with 2.4.x kernels for -additional information; most of that information will not be repeated -here. Basically, this document assumes that your system is already -functional and running at least 2.4.x kernels. +software necessary to run the 3.0 kernels. This document is originally based on my "Changes" file for 2.0.x kernels and therefore owes credit to the same people as that file (Jared Mauch, @@ -22,11 +16,10 @@ Upgrade to at *least* these software revisions before thinking you've encountered a bug! If you're unsure what version you're currently running, the suggested command should tell you. -Again, keep in mind that this list assumes you are already -functionally running a Linux 2.4 kernel. Also, not all tools are -necessary on all systems; obviously, if you don't have any ISDN -hardware, for example, you probably needn't concern yourself with -isdn4k-utils. +Again, keep in mind that this list assumes you are already functionally +running a Linux kernel. Also, not all tools are necessary on all +systems; obviously, if you don't have any ISDN hardware, for example, +you probably needn't concern yourself with isdn4k-utils. o Gnu C 3.2 # gcc --version o Gnu make 3.80 # make --version @@ -114,12 +107,12 @@ Ksymoops If the unthinkable happens and your kernel oopses, you may need the ksymoops tool to decode it, but in most cases you don't. -In the 2.6 kernel it is generally preferred to build the kernel with -CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is -(this also produces better output than ksymoops). -If for some reason your kernel is not build with CONFIG_KALLSYMS and -you have no way to rebuild and reproduce the Oops with that option, then -you can still decode that Oops with ksymoops. +It is generally preferred to build the kernel with CONFIG_KALLSYMS so +that it produces readable dumps that can be used as-is (this also +produces better output than ksymoops). If for some reason your kernel +is not build with CONFIG_KALLSYMS and you have no way to rebuild and +reproduce the Oops with that option, then you can still decode that Oops +with ksymoops. Module-Init-Tools ----------------- @@ -261,8 +254,8 @@ needs to be recompiled or (preferably) upgraded. NFS-utils --------- -In 2.4 and earlier kernels, the nfs server needed to know about any -client that expected to be able to access files via NFS. This +In ancient (2.4 and earlier) kernels, the nfs server needed to know +about any client that expected to be able to access files via NFS. This information would be given to the kernel by "mountd" when the client mounted the filesystem, or by "exportfs" at system startup. exportfs would take information about active clients from /var/lib/nfs/rmtab. @@ -272,11 +265,11 @@ which is not always easy, particularly when trying to implement fail-over. Even when the system is working well, rmtab suffers from getting lots of old entries that never get removed. -With 2.6 we have the option of having the kernel tell mountd when it -gets a request from an unknown host, and mountd can give appropriate -export information to the kernel. This removes the dependency on -rmtab and means that the kernel only needs to know about currently -active clients. +With modern kernels we have the option of having the kernel tell mountd +when it gets a request from an unknown host, and mountd can give +appropriate export information to the kernel. This removes the +dependency on rmtab and means that the kernel only needs to know about +currently active clients. To enable this new functionality, you need to: -- cgit v0.10.2 From d7515b8866b60c9526d2d7af37ebcd16c3c5ed97 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 29 Jun 2011 18:36:19 -0300 Subject: [media] Revert "V4L/DVB: cx23885: Enable Message Signaled Interrupts(MSI)" This reverts commit e38030f3ff02684eb9e25e983a03ad318a10a2ea. MSI flat-out doesn't work right on cx2388x devices yet. There are now multiple reports of cards that hard-lock systems when MSI is enabled, including my own HVR-1250 when trying to use its built-in IR receiver. Disable MSI and it works just fine. Similar for another user's HVR-1270. Issues have also been reported with the HVR-1850 when MSI is enabled, and the 1850 behavior sounds similar to an as-yet-undiagnosed issue I've seen with an 1800. CC: stable@kernel.org CC: Steven Toth CC: Kusanagi Kouichi Signed-off-by: Jarod Wilson Acked-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 64d9b21..419777a 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -2060,12 +2060,8 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev, goto fail_irq; } - if (!pci_enable_msi(pci_dev)) - err = request_irq(pci_dev->irq, cx23885_irq, - IRQF_DISABLED, dev->name, dev); - else - err = request_irq(pci_dev->irq, cx23885_irq, - IRQF_SHARED | IRQF_DISABLED, dev->name, dev); + err = request_irq(pci_dev->irq, cx23885_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, dev); if (err < 0) { printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name, pci_dev->irq); @@ -2114,7 +2110,6 @@ static void __devexit cx23885_finidev(struct pci_dev *pci_dev) /* unregister stuff */ free_irq(pci_dev->irq, dev); - pci_disable_msi(pci_dev); cx23885_dev_unregister(dev); v4l2_device_unregister(v4l2_dev); -- cgit v0.10.2 From 620917de59eeb934b9f8cf35cc2d95c1ac8ed0fc Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 11 Jul 2011 16:51:52 -0700 Subject: Linux 3.0-rc7 diff --git a/Makefile b/Makefile index 86f47a0..60d91f7 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 0 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Sneaky Weasel # *DOCUMENTATION* -- cgit v0.10.2 From f3e456cb899304bed183247ed3228f7ff855eebd Mon Sep 17 00:00:00 2001 From: Rafi Rubin Date: Sun, 3 Jul 2011 17:13:52 -0300 Subject: [media] mceusb: Timeout unit corrections Unit missmatch in mceusb_handle_command. It should be converting to us, not 1/10th of ms. mceusb_dev_printdata 100us/ms -> 1000us/ms Alter format of fix slightly and update comment to match proper reality. Signed-off-by: Rafi Rubin Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 06dfe09..b928a61 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -558,9 +558,10 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, inout, data1); break; case MCE_CMD_S_TIMEOUT: - /* value is in units of 50us, so x*50/100 or x/2 ms */ + /* value is in units of 50us, so x*50/1000 ms */ dev_info(dev, "%s receive timeout of %d ms\n", - inout, ((data1 << 8) | data2) / 2); + inout, + ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000); break; case MCE_CMD_G_TIMEOUT: dev_info(dev, "Get receive timeout\n"); @@ -847,7 +848,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) switch (ir->buf_in[index]) { /* 2-byte return value commands */ case MCE_CMD_S_TIMEOUT: - ir->rc->timeout = US_TO_NS((hi << 8 | lo) / 2); + ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT); break; /* 1-byte return value commands */ -- cgit v0.10.2 From 9824ae4aff2793947ea78c4c8147bb6c59efdcba Mon Sep 17 00:00:00 2001 From: Rafi Rubin Date: Sun, 3 Jul 2011 17:13:53 -0300 Subject: [media] mceusb: increase default timeout to 100ms This matches the typical timeout advertised by hardware, once we're actually interpreting it correctly. Signed-off-by: Rafi Rubin Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index b928a61..ec972dc 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -1079,7 +1079,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) rc->priv = ir; rc->driver_type = RC_DRIVER_IR_RAW; rc->allowed_protos = RC_TYPE_ALL; - rc->timeout = US_TO_NS(1000); + rc->timeout = MS_TO_NS(100); if (!ir->flags.no_tx) { rc->s_tx_mask = mceusb_set_tx_mask; rc->s_tx_carrier = mceusb_set_tx_carrier; -- cgit v0.10.2 From d7b290a1056c5564eec8a1b169c6e84ff3f54c13 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 11 Jul 2011 12:09:00 -0300 Subject: [media] nuvoton-cir: make idle timeout more sane The nuvoton-cir inherited an insanely low idle timeout value from the mceusb driver. We're fixing mceusb, should fix this driver too. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index 565f24c..ce595f9 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -1110,7 +1110,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) rdev->dev.parent = &pdev->dev; rdev->driver_name = NVT_DRIVER_NAME; rdev->map_name = RC_MAP_RC6_MCE; - rdev->timeout = US_TO_NS(1000); + rdev->timeout = MS_TO_NS(100); /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */ rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD); #if 0 -- cgit v0.10.2 From a63fdc5156f2ef5690b6cf03d72b0c4917efbba7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 Jun 2011 10:57:50 +1000 Subject: mm: Move definition of MIN_MEMORY_BLOCK_SIZE to a header The macro MIN_MEMORY_BLOCK_SIZE is currently defined twice in two .c files, and I need it in a third one to fix a powerpc bug, so let's first move it into a header Signed-off-by: Benjamin Herrenschmidt Acked-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index d865c4a..bbaaa00 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -895,8 +896,6 @@ const char *arch_vma_name(struct vm_area_struct *vma) } #ifdef CONFIG_X86_UV -#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) - unsigned long memory_block_size_bytes(void) { if (is_uv_system()) { diff --git a/drivers/base/memory.c b/drivers/base/memory.c index 9f9b235..45d7c8f 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -30,7 +30,6 @@ static DEFINE_MUTEX(mem_sysfs_mutex); #define MEMORY_CLASS_NAME "memory" -#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) static int sections_per_block; diff --git a/include/linux/memory.h b/include/linux/memory.h index e1e3b2b..935699b 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -20,6 +20,8 @@ #include #include +#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) + struct memory_block { unsigned long start_section_nr; unsigned long end_section_nr; -- cgit v0.10.2 From 770e1ac5f29003fca18af4e67eb5a05ddb5b1491 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 14 Jun 2011 10:57:51 +1000 Subject: powerpc/mm: Fix memory_block_size_bytes() for non-pseries Just compiling pseries in the kernel causes it to override memory_block_size_bytes() regardless of what is the runtime platform. This cleans up the implementation of that function, fixing a bug or two while at it, so that it's harmless (and potentially useful) for other platforms. Without this, bugs in that code would trigger a WARN_ON() in drivers/base/memory.c when booting some different platforms. If/when we have another platform supporting memory hotplug we might want to either move that out to a generic place or make it a ppc_md. callback. Signed-off-by: Benjamin Herrenschmidt diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 33867ec..9d6a8ef 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -12,6 +12,8 @@ #include #include #include +#include + #include #include #include @@ -20,24 +22,25 @@ static unsigned long get_memblock_size(void) { struct device_node *np; - unsigned int memblock_size = 0; + unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE; + struct resource r; np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); if (np) { - const unsigned long *size; + const __be64 *size; size = of_get_property(np, "ibm,lmb-size", NULL); - memblock_size = size ? *size : 0; - + if (size) + memblock_size = be64_to_cpup(size); of_node_put(np); - } else { + } else if (machine_is(pseries)) { + /* This fallback really only applies to pseries */ unsigned int memzero_size = 0; - const unsigned int *regs; np = of_find_node_by_path("/memory@0"); if (np) { - regs = of_get_property(np, "reg", NULL); - memzero_size = regs ? regs[3] : 0; + if (!of_address_to_resource(np, 0, &r)) + memzero_size = resource_size(&r); of_node_put(np); } @@ -50,16 +53,21 @@ static unsigned long get_memblock_size(void) sprintf(buf, "/memory@%x", memzero_size); np = of_find_node_by_path(buf); if (np) { - regs = of_get_property(np, "reg", NULL); - memblock_size = regs ? regs[3] : 0; + if (!of_address_to_resource(np, 0, &r)) + memblock_size = resource_size(&r); of_node_put(np); } } } - return memblock_size; } +/* WARNING: This is going to override the generic definition whenever + * pseries is built-in regardless of what platform is active at boot + * time. This is fine for now as this is the only "option" and it + * should work everywhere. If not, we'll have to turn this into a + * ppc_md. callback + */ unsigned long memory_block_size_bytes(void) { return get_memblock_size(); -- cgit v0.10.2 From 7686d1cc5ed0932a533a5acbc3888b48de63bef8 Mon Sep 17 00:00:00 2001 From: Matvejchikov Ilya Date: Sun, 10 Jul 2011 08:49:26 +0000 Subject: slip: fix wrong SLIP6 ifdef-endif placing SLIP6 have nothing to do with CSLIP so placing a block of SLIP6-related code within a CSLIP ifdef-endif block is incorrect. Signed-off-by: Ilya Matvejchikov Signed-off-by: David S. Miller diff --git a/drivers/net/slip.c b/drivers/net/slip.c index 8ec1a9a..2f110fb 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -182,11 +182,11 @@ static int sl_alloc_bufs(struct slip *sl, int mtu) #ifdef SL_INCLUDE_CSLIP cbuff = xchg(&sl->cbuff, cbuff); slcomp = xchg(&sl->slcomp, slcomp); +#endif #ifdef CONFIG_SLIP_MODE_SLIP6 sl->xdata = 0; sl->xbits = 0; #endif -#endif spin_unlock_bh(&sl->lock); err = 0; -- cgit v0.10.2 From cbac9543281f8e813f3ca9186c963a9b55136e93 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 11 Jul 2011 14:49:28 +0000 Subject: drm/radeon/kms: fix regression in hotplug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Skip connectors that do not have an HPD pin. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=39027 Signed-off-by: Alex Deucher Tested-by: Rafał Miłecki Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index cbfca3a..9792d4f 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -52,6 +52,12 @@ void radeon_connector_hotplug(struct drm_connector *connector) struct radeon_device *rdev = dev->dev_private; struct radeon_connector *radeon_connector = to_radeon_connector(connector); + /* bail if the connector does not have hpd pin, e.g., + * VGA, TV, etc. + */ + if (radeon_connector->hpd.hpd == RADEON_HPD_NONE) + return; + radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd); /* powering up/down the eDP panel generates hpd events which -- cgit v0.10.2 From 9a4a0b9c9fa6ad9902f49801d7b770462b69c4d3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 11 Jul 2011 19:45:32 +0000 Subject: drm/radeon/kms: fix backend map typo on juniper Don't enable backends that don't exist. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 660f964..15bd047 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2000,7 +2000,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev) gb_backend_map = 0x66442200; break; case CHIP_JUNIPER: - gb_backend_map = 0x00006420; + gb_backend_map = 0x00002200; break; default: gb_backend_map = -- cgit v0.10.2 From e22e6d20700328ed0a1801ad71cecf1b63a22555 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 11 Jul 2011 20:27:23 +0000 Subject: drm/radeon/kms: use correct BUS_CNTL reg on rs600 BUS_CNTL is at 0x30 on rs600, not 0x4c. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 6e3b11e..1f5850e 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -426,7 +426,7 @@ int rs600_gart_init(struct radeon_device *rdev) return radeon_gart_table_vram_alloc(rdev); } -int rs600_gart_enable(struct radeon_device *rdev) +static int rs600_gart_enable(struct radeon_device *rdev) { u32 tmp; int r, i; @@ -440,8 +440,8 @@ int rs600_gart_enable(struct radeon_device *rdev) return r; radeon_gart_restore(rdev); /* Enable bus master */ - tmp = RREG32(R_00004C_BUS_CNTL) & C_00004C_BUS_MASTER_DIS; - WREG32(R_00004C_BUS_CNTL, tmp); + tmp = RREG32(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS; + WREG32(RADEON_BUS_CNTL, tmp); /* FIXME: setup default page */ WREG32_MC(R_000100_MC_PT0_CNTL, (S_000100_EFFECTIVE_L2_CACHE_SIZE(6) | -- cgit v0.10.2 From 4171424e66e5525d7128a2c355215ca5c66f76d5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 11 Jul 2011 20:22:33 +0000 Subject: drm/radeon/kms: fix typo in read_disabled vbios code BUS_CNTL reg and bits moved between pre-PCIE and PCIE asics. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 3fc5fa1..229a20f 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -331,7 +331,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev) seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1); viph_control = RREG32(RADEON_VIPH_CONTROL); - bus_cntl = RREG32(RADEON_BUS_CNTL); + bus_cntl = RREG32(RV370_BUS_CNTL); d1vga_control = RREG32(AVIVO_D1VGA_CONTROL); d2vga_control = RREG32(AVIVO_D2VGA_CONTROL); vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL); @@ -350,7 +350,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev) WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN)); /* enable the rom */ - WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM)); + WREG32(RV370_BUS_CNTL, (bus_cntl & ~RV370_BUS_BIOS_DIS_ROM)); /* Disable VGA mode */ WREG32(AVIVO_D1VGA_CONTROL, @@ -367,7 +367,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev) /* restore regs */ WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1); WREG32(RADEON_VIPH_CONTROL, viph_control); - WREG32(RADEON_BUS_CNTL, bus_cntl); + WREG32(RV370_BUS_CNTL, bus_cntl); WREG32(AVIVO_D1VGA_CONTROL, d1vga_control); WREG32(AVIVO_D2VGA_CONTROL, d2vga_control); WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control); @@ -390,7 +390,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev) seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1); viph_control = RREG32(RADEON_VIPH_CONTROL); - bus_cntl = RREG32(RADEON_BUS_CNTL); + if (rdev->flags & RADEON_IS_PCIE) + bus_cntl = RREG32(RV370_BUS_CNTL); + else + bus_cntl = RREG32(RADEON_BUS_CNTL); crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL); crtc2_gen_cntl = 0; crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL); @@ -412,7 +415,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev) WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN)); /* enable the rom */ - WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM)); + if (rdev->flags & RADEON_IS_PCIE) + WREG32(RV370_BUS_CNTL, (bus_cntl & ~RV370_BUS_BIOS_DIS_ROM)); + else + WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM)); /* Turn off mem requests and CRTC for both controllers */ WREG32(RADEON_CRTC_GEN_CNTL, @@ -439,7 +445,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev) /* restore regs */ WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1); WREG32(RADEON_VIPH_CONTROL, viph_control); - WREG32(RADEON_BUS_CNTL, bus_cntl); + if (rdev->flags & RADEON_IS_PCIE) + WREG32(RV370_BUS_CNTL, bus_cntl); + else + WREG32(RADEON_BUS_CNTL, bus_cntl); WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl); if (!(rdev->flags & RADEON_SINGLE_CRTC)) { WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index ec93a75..bc44a3d 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -300,6 +300,8 @@ # define RADEON_BUS_READ_BURST (1 << 30) #define RADEON_BUS_CNTL1 0x0034 # define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4) +#define RV370_BUS_CNTL 0x004c +# define RV370_BUS_BIOS_DIS_ROM (1 << 2) /* rv370/rv380, rv410, r423/r430/r480, r5xx */ #define RADEON_MSI_REARM_EN 0x0160 # define RV370_MSI_REARM_EN (1 << 0) -- cgit v0.10.2 From 1ce533686c7d40bf900dc346a7279c17a9ee8e0e Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Mon, 13 Jun 2011 14:27:40 -0500 Subject: GFS2: force a log flush when invalidating the rindex glock Right now, there is nothing that forces the log to get flushed when a node drops its rindex glock so that another node can grow the filesystem. If the log doesn't get flushed, GFS2 can corrupt the sd_log_le_rg list in the following way. A node puts an rgd on the list in rg_lo_add(), and then the rindex glock is dropped so the other node can grow the filesystem. When the node reacquires the rindex glock, that rgd gets deleted in clear_rgrpdi() before ever being removed from the list by gfs2_log_flush(). This code simply forces a log flush when the rindex glock is invalidated, solving the problem. Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index 8ef70f4..712b722 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -221,8 +221,10 @@ static void inode_go_inval(struct gfs2_glock *gl, int flags) } } - if (ip == GFS2_I(gl->gl_sbd->sd_rindex)) + if (ip == GFS2_I(gl->gl_sbd->sd_rindex)) { + gfs2_log_flush(gl->gl_sbd, NULL); gl->gl_sbd->sd_rindex_uptodate = 0; + } if (ip && S_ISREG(ip->i_inode.i_mode)) truncate_inode_pages(ip->i_inode.i_mapping, 0); } -- cgit v0.10.2 From 3942ae5319640ced5844b75f44884e4bcb8a2f16 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 11 Jul 2011 08:53:30 +0100 Subject: GFS2: Fix race during filesystem mount There is a potential race during filesystem mounting which has recently been reported. It occurs when the userland gfs_controld is able to process requests fast enough that it tries to use the sysfs interface before the lock module is properly initialised. This is a pretty unusual case as normally the lock module initialisation is very quick compared with gfs_controld. This patch adds an interruptible completion which is used to ensure that userland will wait for the initialisation of the lock module to complete. There are other potential solutions to this problem, but this is the quickest at this stage and has been tested both with and without mount.gfs2 present in the system. Signed-off-by: Steven Whitehouse Reported-by: David Booher diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h index 0a064e9..81206e7 100644 --- a/fs/gfs2/incore.h +++ b/fs/gfs2/incore.h @@ -17,6 +17,7 @@ #include #include #include +#include #define DIO_WAIT 0x00000010 #define DIO_METADATA 0x00000020 @@ -546,6 +547,7 @@ struct gfs2_sbd { struct gfs2_glock *sd_trans_gl; wait_queue_head_t sd_glock_wait; atomic_t sd_glock_disposal; + struct completion sd_locking_init; /* Inode Stuff */ diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 8ac9ae1..2a77071 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -72,6 +72,7 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb) init_waitqueue_head(&sdp->sd_glock_wait); atomic_set(&sdp->sd_glock_disposal, 0); + init_completion(&sdp->sd_locking_init); spin_lock_init(&sdp->sd_statfs_spin); spin_lock_init(&sdp->sd_rindex_spin); @@ -1017,11 +1018,13 @@ hostdata_error: fsname++; if (lm->lm_mount == NULL) { fs_info(sdp, "Now mounting FS...\n"); + complete(&sdp->sd_locking_init); return 0; } ret = lm->lm_mount(sdp, fsname); if (ret == 0) fs_info(sdp, "Joined cluster. Now mounting FS...\n"); + complete(&sdp->sd_locking_init); return ret; } diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index e20eab3..443cabc 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -338,6 +338,9 @@ static ssize_t lkfirst_store(struct gfs2_sbd *sdp, const char *buf, size_t len) rv = sscanf(buf, "%u", &first); if (rv != 1 || first > 1) return -EINVAL; + rv = wait_for_completion_killable(&sdp->sd_locking_init); + if (rv) + return rv; spin_lock(&sdp->sd_jindex_spin); rv = -EBUSY; if (test_bit(SDF_NOJOURNALID, &sdp->sd_flags) == 0) @@ -414,7 +417,9 @@ static ssize_t jid_store(struct gfs2_sbd *sdp, const char *buf, size_t len) rv = sscanf(buf, "%d", &jid); if (rv != 1) return -EINVAL; - + rv = wait_for_completion_killable(&sdp->sd_locking_init); + if (rv) + return rv; spin_lock(&sdp->sd_jindex_spin); rv = -EINVAL; if (sdp->sd_lockstruct.ls_ops->lm_mount == NULL) -- cgit v0.10.2 From f299bb9527abfa6ee45a5e26288b5e3a619f01d6 Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Tue, 12 Jul 2011 00:03:11 +0300 Subject: arm: davinci: Fix low level gpio irq handlers' argument Commit 7416401 ("arm: davinci: Fix fallout from generic irq chip conversion") introduced a bug, causing low level interrupt handlers to get a bogus irq number as an argument. The gpio irq handler falsely assumes that the handler data is the irq base number and that is no longer true. Set the irq handler data to be a pointer to the corresponding gpio controller. The chained irq handler can then use it to extract both the irq base number and the gpio registers structure. Signed-off-by: Ido Yariv CC: Thomas Gleixner [nsekhar@ti.com: renamed "ctl" to "d", simplified indexing logic for chips and took care of odd bank handling in irq handler] Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index e722139..cafbe13 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -254,8 +254,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) { struct davinci_gpio_regs __iomem *g; u32 mask = 0xffff; + struct davinci_gpio_controller *d; - g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc); + d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); + g = (struct davinci_gpio_regs __iomem *)d->regs; /* we only care about one bank */ if (irq & 1) @@ -274,11 +276,14 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) if (!status) break; __raw_writel(status, &g->intstat); - if (irq & 1) - status >>= 16; /* now demux them to the right lowlevel handler */ - n = (int)irq_get_handler_data(irq); + n = d->irq_base; + if (irq & 1) { + n += 16; + status >>= 16; + } + while (status) { res = ffs(status); n += res; @@ -424,7 +429,13 @@ static int __init davinci_gpio_irq_setup(void) /* set up all irqs in this bank */ irq_set_chained_handler(bank_irq, gpio_irq_handler); - irq_set_handler_data(bank_irq, (__force void *)g); + + /* + * Each chip handles 32 gpios, and each irq bank consists of 16 + * gpio irqs. Pass the irq bank's corresponding controller to + * the chained irq handler. + */ + irq_set_handler_data(bank_irq, &chips[gpio / 32]); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { irq_set_chip(irq, &gpio_irqchip); -- cgit v0.10.2 From 022ae537b23cb14a391565e9ad9e9945f4b17138 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 8 Jul 2011 21:26:59 +0100 Subject: ARM: dma: replace ISA_DMA_THRESHOLD with a variable ISA_DMA_THRESHOLD has been unused by non-arch code, so lets now get rid of it from ARM by replacing it with arm_dma_zone_mask. Move dma_supported() and dma_set_mask() out of line, and have dma_supported() check this new variable instead. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 94662f4..7a21d0b 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -115,33 +115,8 @@ static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off, ___dma_page_dev_to_cpu(page, off, size, dir); } -/* - * Return whether the given device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits - * during bus mastering, then you would pass 0x00ffffff as the mask - * to this function. - * - * FIXME: This should really be a platform specific issue - we should - * return false if GFP_DMA allocations may not satisfy the supplied 'mask'. - */ -static inline int dma_supported(struct device *dev, u64 mask) -{ - if (mask < ISA_DMA_THRESHOLD) - return 0; - return 1; -} - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - if (!dev->dma_mask || !dma_supported(dev, dma_mask)) - return -EIO; - -#ifndef CONFIG_DMABOUNCE - *dev->dma_mask = dma_mask; -#endif - - return 0; -} +extern int dma_supported(struct device *, u64); +extern int dma_set_mask(struct device *, u64); /* * DMA errors are defined by all-bits-set in the DMA address. diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index af44a8f..b8de516 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -204,18 +204,6 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif /* - * The DMA mask corresponding to the maximum bus address allocatable - * using GFP_DMA. The default here places no restriction on DMA - * allocations. This must be the smallest DMA mask in the system, - * so a successful GFP_DMA allocation will always satisfy this. - */ -#ifndef ARM_DMA_ZONE_SIZE -#define ISA_DMA_THRESHOLD (0xffffffffULL) -#else -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1) -#endif - -/* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. * diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 82a093c..0a0a1e7 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -25,9 +25,11 @@ #include #include +#include "mm.h" + static u64 get_coherent_dma_mask(struct device *dev) { - u64 mask = ISA_DMA_THRESHOLD; + u64 mask = (u64)arm_dma_limit; if (dev) { mask = dev->coherent_dma_mask; @@ -41,10 +43,10 @@ static u64 get_coherent_dma_mask(struct device *dev) return 0; } - if ((~mask) & ISA_DMA_THRESHOLD) { + if ((~mask) & (u64)arm_dma_limit) { dev_warn(dev, "coherent DMA mask %#llx is smaller " "than system GFP_DMA mask %#llx\n", - mask, (unsigned long long)ISA_DMA_THRESHOLD); + mask, (u64)arm_dma_limit); return 0; } } @@ -657,6 +659,33 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, } EXPORT_SYMBOL(dma_sync_sg_for_device); +/* + * Return whether the given device DMA address mask can be supported + * properly. For example, if your device can only drive the low 24-bits + * during bus mastering, then you would pass 0x00ffffff as the mask + * to this function. + */ +int dma_supported(struct device *dev, u64 mask) +{ + if (mask < (u64)arm_dma_limit) + return 0; + return 1; +} +EXPORT_SYMBOL(dma_supported); + +int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + +#ifndef CONFIG_DMABOUNCE + *dev->dma_mask = dma_mask; +#endif + + return 0; +} +EXPORT_SYMBOL(dma_set_mask); + #define PREALLOC_DMA_DEBUG_ENTRIES 4096 static int __init dma_debug_do_init(void) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c19571c..17d6cd0 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -212,6 +212,14 @@ static void __init arm_bootmem_init(unsigned long start_pfn, } #ifdef CONFIG_ZONE_DMA +/* + * The DMA mask corresponding to the maximum bus address allocatable + * using GFP_DMA. The default here places no restriction on DMA + * allocations. This must be the smallest DMA mask in the system, + * so a successful GFP_DMA allocation will always satisfy this. + */ +u32 arm_dma_limit; + static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole, unsigned long dma_size) { @@ -278,6 +286,8 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, */ arm_adjust_dma_zone(zone_size, zhole_size, ARM_DMA_ZONE_SIZE >> PAGE_SHIFT); + + arm_dma_limit = PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1; #endif free_area_init_node(0, zone_size, min, zhole_size); diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 5b3d7d5..0105667 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -23,5 +23,11 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif +#ifdef CONFIG_ZONE_DMA +extern u32 arm_dma_limit; +#else +#define arm_dma_limit ((u32)~0) +#endif + void __init bootmem_init(void); void arm_mm_memblock_reserve(void); -- cgit v0.10.2 From 8fc62e59425389a6d48429b9d146223122743435 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 12 Jul 2011 11:54:48 +0200 Subject: kbuild: Do not write to builddir in modules_install Let depmod.sh create a temporary directory in /tmp instead of writing to the build directory as root. The mktemp utility should be available on any recent system (and there is already scripts/gen_initramfs_list.sh relying on it). Reported-by: Christian Kujau Signed-off-by: Michal Marek diff --git a/scripts/depmod.sh b/scripts/depmod.sh index 3b029cb..a272356 100755 --- a/scripts/depmod.sh +++ b/scripts/depmod.sh @@ -21,13 +21,15 @@ fi # older versions of depmod require the version string to start with three # numbers, so we cheat with a symlink here depmod_hack_needed=true -mkdir -p .tmp_depmod/lib/modules/$KERNELRELEASE -if "$DEPMOD" -b .tmp_depmod $KERNELRELEASE 2>/dev/null; then - if test -e .tmp_depmod/lib/modules/$KERNELRELEASE/modules.dep -o \ - -e .tmp_depmod/lib/modules/$KERNELRELEASE/modules.dep.bin; then +tmp_dir=$(mktemp -d ${TMPDIR:-/tmp}/depmod.XXXXXX) +mkdir -p "$tmp_dir/lib/modules/$KERNELRELEASE" +if "$DEPMOD" -b "$tmp_dir" $KERNELRELEASE 2>/dev/null; then + if test -e "$tmp_dir/lib/modules/$KERNELRELEASE/modules.dep" -o \ + -e "$tmp_dir/lib/modules/$KERNELRELEASE/modules.dep.bin"; then depmod_hack_needed=false fi fi +rm -rf "$tmp_dir" if $depmod_hack_needed; then symlink="$INSTALL_MOD_PATH/lib/modules/99.98.$KERNELRELEASE" ln -s "$KERNELRELEASE" "$symlink" -- cgit v0.10.2 From f450c1504d3ff6aace3927c805bdea0ac0669efd Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 10 Jul 2011 19:31:29 -0700 Subject: hwmon: (pmbus) Use long variables for register to data conversions Using integer variable types for register to data conversions can cause overflows especially for power calculations, which are in microwatt. Use long variables instead. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Cc: stable@kernel.org # 2.6.39+ diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c index 744672c..8e31a8e 100644 --- a/drivers/hwmon/pmbus_core.c +++ b/drivers/hwmon/pmbus_core.c @@ -362,8 +362,8 @@ static struct pmbus_data *pmbus_update_device(struct device *dev) * Convert linear sensor values to milli- or micro-units * depending on sensor type. */ -static int pmbus_reg2data_linear(struct pmbus_data *data, - struct pmbus_sensor *sensor) +static long pmbus_reg2data_linear(struct pmbus_data *data, + struct pmbus_sensor *sensor) { s16 exponent; s32 mantissa; @@ -397,15 +397,15 @@ static int pmbus_reg2data_linear(struct pmbus_data *data, else val >>= -exponent; - return (int)val; + return val; } /* * Convert direct sensor values to milli- or micro-units * depending on sensor type. */ -static int pmbus_reg2data_direct(struct pmbus_data *data, - struct pmbus_sensor *sensor) +static long pmbus_reg2data_direct(struct pmbus_data *data, + struct pmbus_sensor *sensor) { long val = (s16) sensor->data; long m, b, R; @@ -440,12 +440,12 @@ static int pmbus_reg2data_direct(struct pmbus_data *data, R++; } - return (int)((val - b) / m); + return (val - b) / m; } -static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) +static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) { - int val; + long val; if (data->info->direct[sensor->class]) val = pmbus_reg2data_direct(data, sensor); @@ -619,7 +619,7 @@ static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val) if (!s1 && !s2) *val = !!regval; else { - int v1, v2; + long v1, v2; struct pmbus_sensor *sensor1, *sensor2; sensor1 = &data->sensors[s1]; @@ -661,7 +661,7 @@ static ssize_t pmbus_show_sensor(struct device *dev, if (sensor->data < 0) return sensor->data; - return snprintf(buf, PAGE_SIZE, "%d\n", pmbus_reg2data(data, sensor)); + return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor)); } static ssize_t pmbus_set_sensor(struct device *dev, -- cgit v0.10.2 From a7b85d2aa63ed09cd5a4a640772b3272f5ac7caa Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 10 Jul 2011 13:12:17 -0700 Subject: drm/i915: Clean up i915_driver_load failure path i915_driver_load adds a write-combining MTRR region for the GTT aperture to improve memory speeds through the aperture. If i915_driver_load fails after this, it would not have cleaned up the MTRR. This shouldn't cause any problems, except for consuming an MTRR register. Still, it's best to clean up completely in the failure path, which is easily done by calling mtrr_del if the mtrr was successfully allocated. i915_driver_load calls i915_gem_load which register i915_gem_inactive_shrink. If i915_driver_load fails after calling i915_gem_load, the shrinker will be left registered. When called, it will access freed memory and crash. The fix is to unregister the shrinker in the failure path using code duplicated from i915_driver_unload. i915_driver_load also has some incorrect gotos in the error cleanup paths: * After failing to initialize the GTT (which cannot happen, btw, intel_gtt_get returns a fixed (non-NULL) value), it tries to free the uninitialized WC IO mapping. Fixed this by changing the target from out_iomapfree to out_rmmap Signed-off-by: Keith Packard Tested-by: Lin Ming diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index e178702..296fbd6 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1943,7 +1943,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (!dev_priv->mm.gtt) { DRM_ERROR("Failed to initialize GTT\n"); ret = -ENODEV; - goto out_iomapfree; + goto out_rmmap; } agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT; @@ -1987,7 +1987,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (dev_priv->wq == NULL) { DRM_ERROR("Failed to create our workqueue.\n"); ret = -ENOMEM; - goto out_iomapfree; + goto out_mtrrfree; } /* enable GEM by default */ @@ -2074,13 +2074,21 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) return 0; out_gem_unload: + if (dev_priv->mm.inactive_shrinker.shrink) + unregister_shrinker(&dev_priv->mm.inactive_shrinker); + if (dev->pdev->msi_enabled) pci_disable_msi(dev->pdev); intel_teardown_gmbus(dev); intel_teardown_mchbar(dev); destroy_workqueue(dev_priv->wq); -out_iomapfree: +out_mtrrfree: + if (dev_priv->mm.gtt_mtrr >= 0) { + mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base, + dev->agp->agp_info.aper_size * 1024 * 1024); + dev_priv->mm.gtt_mtrr = -1; + } io_mapping_free(dev_priv->mm.gtt_mapping); out_rmmap: pci_iounmap(dev->pdev, dev_priv->regs); -- cgit v0.10.2 From 05bd42688dbc066d4e2689b6f73c0470601f788b Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Tue, 12 Jul 2011 08:49:31 -0700 Subject: Revert "drm/i915: enable rc6 by default" This reverts commit a51f7a66fb5e4af5ec4286baef940d06594b59d2. We still have a few Ironlake and Sandybridge machines which fail when RC6 is enabled. Better luck next release? Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 58222e8..eb91e2d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -52,7 +52,7 @@ module_param_named(powersave, i915_powersave, int, 0600); unsigned int i915_semaphores = 0; module_param_named(semaphores, i915_semaphores, int, 0600); -unsigned int i915_enable_rc6 = 1; +unsigned int i915_enable_rc6 = 0; module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); unsigned int i915_enable_fbc = 0; -- cgit v0.10.2 From a94919eaddaa3fede1df8563ce4d761a75374645 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 12 Jul 2011 18:03:29 +0100 Subject: drm/i915/ringbuffer: Idling requires waiting for the ring to be empty ...which is measured by the size and not the amount of space remaining. Waiting upon size-8, did one of two things. In the common case with more than 8 bytes available to write into the ring, it would return immediately. Otherwise, it would timeout given the impossible condition of waiting for more space than is available in the ring, leading to warnings such as: [drm:intel_cleanup_ring_buffer] *ERROR* failed to quiesce render ring whilst cleaning up: -16 Signed-off-by: Chris Wilson Reviewed-by: Eric Anholt Signed-off-by: Keith Packard diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index c0e0ee6..39ac2b6 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -165,7 +165,7 @@ void intel_cleanup_ring_buffer(struct intel_ring_buffer *ring); int __must_check intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n); static inline int intel_wait_ring_idle(struct intel_ring_buffer *ring) { - return intel_wait_ring_buffer(ring, ring->space - 8); + return intel_wait_ring_buffer(ring, ring->size - 8); } int __must_check intel_ring_begin(struct intel_ring_buffer *ring, int n); -- cgit v0.10.2 From ec0dd267bf7d08cb30e321e45a75fd40edd7e528 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Tue, 12 Jul 2011 10:27:55 -0700 Subject: SUNRPC: Fix use of static variable in rpcb_getport_async Because struct rpcbind_args *map was declared static, if two threads entered this method at the same time, the values assigned to map could be sent two two differen tasks. This could cause all sorts of problems, include use-after-free and double-free of memory. Fix this by removing the static declaration so that the map pointer is on the stack. Signed-off-by: Ben Greear Cc: stable@kernel.org Signed-off-by: Trond Myklebust diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c index 9a80a92..e45d2fb 100644 --- a/net/sunrpc/rpcb_clnt.c +++ b/net/sunrpc/rpcb_clnt.c @@ -597,7 +597,7 @@ void rpcb_getport_async(struct rpc_task *task) u32 bind_version; struct rpc_xprt *xprt; struct rpc_clnt *rpcb_clnt; - static struct rpcbind_args *map; + struct rpcbind_args *map; struct rpc_task *child; struct sockaddr_storage addr; struct sockaddr *sap = (struct sockaddr *)&addr; -- cgit v0.10.2 From 62411ab2fe5f002dff27417630ddf02cc40ca404 Mon Sep 17 00:00:00 2001 From: Shirish Pargaonkar Date: Sun, 10 Jul 2011 06:55:32 -0500 Subject: cifs: Fix signing failure when server mandates signing for NTLMSSP When using NTLMSSP authentication mechanism, if server mandates signing, keep the flags in type 3 messages of the NTLMSSP exchange same as in type 1 messages (i.e. keep the indicated capabilities same). Some of the servers such as Samba, expect the flags such as Negotiate_Key_Exchange in type 3 message of NTLMSSP exchange as well. Some servers like Windows do not. https://bugzilla.samba.org/show_bug.cgi?id=8212 Signed-off-by: Shirish Pargaonkar Acked-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 3892ab8..d3e6196 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -428,8 +428,7 @@ static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer, (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { flags |= NTLMSSP_NEGOTIATE_SIGN; if (!ses->server->session_estab) - flags |= NTLMSSP_NEGOTIATE_KEY_XCH | - NTLMSSP_NEGOTIATE_EXTENDED_SEC; + flags |= NTLMSSP_NEGOTIATE_KEY_XCH; } sec_blob->NegotiateFlags = cpu_to_le32(flags); @@ -465,10 +464,11 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer, NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC; if (ses->server->sec_mode & - (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) + (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { flags |= NTLMSSP_NEGOTIATE_SIGN; - if (ses->server->sec_mode & SECMODE_SIGN_REQUIRED) - flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN; + if (!ses->server->session_estab) + flags |= NTLMSSP_NEGOTIATE_KEY_XCH; + } tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE); sec_blob->NegotiateFlags = cpu_to_le32(flags); -- cgit v0.10.2 From ea1be1a3c3c4b2bbc32aeb7995e18336c8060e0e Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 12 Jul 2011 18:24:43 +0000 Subject: [CIFS] update limit for snprintf in cifs_construct_tcon In 34c87901e113 "Shrink stack space usage in cifs_construct_tcon" we change the size of the username name buffer from MAX_USERNAME_SIZE (256) to 28. This call to snprintf() needs to be updated as well. Reported by Dan Carpenter. Reviewed-by: Dan Carpenter Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index dbd669c..ccc1afa 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3485,7 +3485,7 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, uid_t fsuid) goto out; } - snprintf(username, MAX_USERNAME_SIZE, "krb50x%x", fsuid); + snprintf(username, sizeof(username), "krb50x%x", fsuid); vol_info->username = username; vol_info->local_nls = cifs_sb->local_nls; vol_info->linux_uid = fsuid; -- cgit v0.10.2 From c2ec9471b5b1307429aef1cfaa2b3ae453a61d6f Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 12 Jul 2011 19:15:02 +0000 Subject: [CIFS] update cifs to version 1.74 Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 0900e16..036ca83 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -129,5 +129,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* CIFS_NFSD_EXPORT */ -#define CIFS_VERSION "1.73" +#define CIFS_VERSION "1.74" #endif /* _CIFSFS_H */ -- cgit v0.10.2 From 94c0d4ecbe7f9fe56e052b26b2ab484e246c07b4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 12 Jul 2011 21:40:23 -0400 Subject: Fix ->d_lock locking order in unlazy_walk() Make sure that child is still a child of parent before nested locking of child->d_lock in unlazy_walk(); otherwise we are risking a violation of locking order and deadlocks. Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index 0223c41..5c867dd 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -433,6 +433,8 @@ static int unlazy_walk(struct nameidata *nd, struct dentry *dentry) goto err_parent; BUG_ON(nd->inode != parent->d_inode); } else { + if (dentry->d_parent != parent) + goto err_parent; spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED); if (!__d_rcu_to_refcount(dentry, nd->seq)) goto err_child; -- cgit v0.10.2 From 11e48feebe8b5d2ae348893a6e0d47c46204bee2 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Mon, 11 Jul 2011 20:27:40 -0700 Subject: x86, doc only: Correct real-mode kernel header offset for init_size The real-mode kernel header init_size field is located at 0x260 per the field listing in th e"REAL-MODE KERNEL HEADER" section. It is listed as 0x25c in the "DETAILS OF HEADER FIELDS" section, which overlaps with pref_address. Correct the details listing to 0x260. Signed-off-by: Darren Hart Link: http://lkml.kernel.org/r/541cf88e2dfe5b8186d8b96b136d892e769a68c1.1310441260.git.dvhart@linux.intel.com CC: H. Peter Anvin Signed-off-by: H. Peter Anvin diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 9b7221a..7c3a880 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -674,7 +674,7 @@ Protocol: 2.10+ Field name: init_size Type: read -Offset/size: 0x25c/4 +Offset/size: 0x260/4 This field indicates the amount of linear contiguous memory starting at the kernel runtime start address that the kernel needs before it -- cgit v0.10.2 From 4756fc64ecd628efa6f8296711d7dbcefabf25dd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 24 Jun 2011 10:30:09 -0300 Subject: [media] MEDIA: Fix non-ISA_DMA_API link failure of sound code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit sound/isa/es18xx.c: In function ‘snd_es18xx_playback1_prepare’: sound/isa/es18xx.c:501:9: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/es18xx.c: In function ‘snd_es18xx_playback_pointer’: sound/isa/es18xx.c:818:3: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [sound/isa/es18xx.o] Error 1 sound/isa/sscape.c: In function ‘upload_dma_data’: sound/isa/sscape.c:481:3: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [sound/isa/sscape.o] Error 1 sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_playback_prepare’: sound/isa/ad1816a/ad1816a_lib.c:244:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_playback_pointer’: sound/isa/ad1816a/ad1816a_lib.c:302:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] sound/isa/ad1816a/ad1816a_lib.c: In function ‘snd_ad1816a_free’: sound/isa/ad1816a/ad1816a_lib.c:544:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/ad1816a/ad1816a_lib.o] Error 1 make[3]: Target `__build' not remade because of errors. make[2]: *** [sound/isa/ad1816a] Error 2 sound/isa/es1688/es1688_lib.c: In function ‘snd_es1688_playback_prepare’: sound/isa/es1688/es1688_lib.c:417:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/es1688/es1688_lib.c: In function ‘snd_es1688_playback_pointer’: sound/isa/es1688/es1688_lib.c:509:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/es1688/es1688_lib.o] Error 1 make[3]: Target `__build' not remade because of errors. make[2]: *** [sound/isa/es1688] Error 2 sound/isa/gus/gus_dma.c: In function ‘snd_gf1_dma_program’: sound/isa/gus/gus_dma.c:79:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/gus/gus_dma.c: In function ‘snd_gf1_dma_done’: sound/isa/gus/gus_dma.c:177:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/gus/gus_dma.o] Error 1 sound/isa/gus/gus_pcm.c: In function ‘snd_gf1_pcm_capture_prepare’: sound/isa/gus/gus_pcm.c:591:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/gus/gus_pcm.c: In function ‘snd_gf1_pcm_capture_pointer’: sound/isa/gus/gus_pcm.c:619:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/gus/gus_pcm.o] Error 1 make[3]: Target `__build' not remade because of errors. make[2]: *** [sound/isa/gus] Error 2 sound/isa/sb/sb16_csp.c: In function ‘snd_sb_csp_ioctl’: sound/isa/sb/sb16_csp.c:228:227: error: case label does not reduce to an integer constant make[3]: *** [sound/isa/sb/sb16_csp.o] Error 1 sound/isa/sb/sb16_main.c: In function ‘snd_sb16_playback_prepare’: sound/isa/sb/sb16_main.c:276:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/sb/sb16_main.c: In function ‘snd_sb16_playback_pointer’: sound/isa/sb/sb16_main.c:456:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/sb/sb16_main.o] Error 1 sound/isa/sb/sb8_main.c: In function ‘snd_sb8_playback_prepare’: sound/isa/sb/sb8_main.c:172:3: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/sb/sb8_main.c: In function ‘snd_sb8_playback_pointer’: sound/isa/sb/sb8_main.c:425:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/sb/sb8_main.o] Error 1 make[3]: Target `__build' not remade because of errors. make[2]: *** [sound/isa/sb] Error 2 sound/isa/wss/wss_lib.c: In function ‘snd_wss_playback_prepare’: sound/isa/wss/wss_lib.c:1025:2: error: implicit declaration of function ‘snd_dma_program’ [-Werror=implicit-function-declaration] sound/isa/wss/wss_lib.c: In function ‘snd_wss_playback_pointer’: sound/isa/wss/wss_lib.c:1160:2: error: implicit declaration of function ‘snd_dma_pointer’ [-Werror=implicit-function-declaration] sound/isa/wss/wss_lib.c: In function ‘snd_wss_free’: sound/isa/wss/wss_lib.c:1695:3: error: implicit declaration of function ‘snd_dma_disable’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [sound/isa/wss/wss_lib.o] Error 1 warning: (RADIO_MIROPCM20) selects SND_ISA which has unmet direct dependencies (SOUND && !M68K && SND && ISA && ISA_DMA_API) A build with ISA && ISA_DMA && !ISA_DMA_API results in: CC sound/isa/es18xx.o CC sound/isa/sscape.o CC sound/isa/ad1816a/ad1816a_lib.o CC sound/isa/es1688/es1688_lib.o CC sound/isa/gus/gus_dma.o CC sound/isa/gus/gus_pcm.o CC sound/isa/sb/sb16_csp.o CC sound/isa/sb/sb16_main.o CC sound/isa/sb/sb8_main.o CC sound/isa/wss/wss_lib.o The root cause for this is hidden in this Kconfig warning: Adding a dependency on ISA_DMA_API to RADIO_MIROPCM20 fixes these issues. Signed-off-by: Ralf Baechle Acked-by: Takashi Iwai Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index e4c97fd..0aeed28 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -168,7 +168,7 @@ config RADIO_MAXIRADIO config RADIO_MIROPCM20 tristate "miroSOUND PCM20 radio" - depends on ISA && VIDEO_V4L2 && SND + depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND select SND_ISA select SND_MIRO ---help--- -- cgit v0.10.2 From 3628c3f5c818cfc6e588d1ccb31f19aa12345c02 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 28 Jun 2011 15:57:31 +0200 Subject: x86. reboot: Make Dell Latitude E6320 use reboot=pci The Dell Latitude E6320 doesn't reboot unless reboot=pci is set. Force it thanks to DMI. Signed-off-by: Maxime Ripard Link: http://lkml.kernel.org/r/1309269451-4966-1-git-send-email-maxime.ripard@free-electrons.com Cc: Matthew Garrett Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 4f0d46f..14eed21 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -419,6 +419,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"), }, }, + { /* Handle problems with rebooting on the Latitude E6320. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6320", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), + }, + }, { } }; -- cgit v0.10.2 From 780d7cc44524cd396a34757127f51ecb8ccaf2da Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 12 Jul 2011 23:38:18 +0100 Subject: agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2M Konstantin Belousov found an error in the define of G4x_GMCH_SIZE_VT_2M relative to the GMCH specs, and confirmed that indeed one of his users with a Q45 reports 0xb not 0xc for a 2/2MiB GATT. Signed-off-by: Chris Wilson Cc: Konstantin Belousov Cc: Daniel Vetter Acked-by: Daniel Vetter Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index 999803c..5da67f1 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -90,9 +90,10 @@ #define G4x_GMCH_SIZE_MASK (0xf << 8) #define G4x_GMCH_SIZE_1M (0x1 << 8) #define G4x_GMCH_SIZE_2M (0x3 << 8) -#define G4x_GMCH_SIZE_VT_1M (0x9 << 8) -#define G4x_GMCH_SIZE_VT_1_5M (0xa << 8) -#define G4x_GMCH_SIZE_VT_2M (0xc << 8) +#define G4x_GMCH_SIZE_VT_EN (0x8 << 8) +#define G4x_GMCH_SIZE_VT_1M (G4x_GMCH_SIZE_1M | G4x_GMCH_SIZE_VT_EN) +#define G4x_GMCH_SIZE_VT_1_5M ((0x2 << 8) | G4x_GMCH_SIZE_VT_EN) +#define G4x_GMCH_SIZE_VT_2M (G4x_GMCH_SIZE_2M | G4x_GMCH_SIZE_VT_EN) #define GFX_FLSH_CNTL 0x2170 /* 915+ */ -- cgit v0.10.2 From c61d0af9131976db150c40996a71387ba59edb67 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 12 Jul 2011 11:53:23 -0400 Subject: drm/radeon/kms/evergreen: emit SQ_LDS_RESOURCE_MGMT for blits Compute drivers may change this, so make sure to emit it to avoid errors in bo blits. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39119 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c index 57f3bc1..2eb2518 100644 --- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c +++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c @@ -252,7 +252,7 @@ draw_auto(struct radeon_device *rdev) } -/* emits 36 */ +/* emits 39 */ static void set_default_state(struct radeon_device *rdev) { @@ -531,6 +531,11 @@ set_default_state(struct radeon_device *rdev) radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2); radeon_ring_write(rdev, 0); + /* setup LDS */ + radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1)); + radeon_ring_write(rdev, (SQ_LDS_RESOURCE_MGMT - PACKET3_SET_CONFIG_REG_START) >> 2); + radeon_ring_write(rdev, 0x10001000); + /* SQ config */ radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11)); radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2); @@ -773,7 +778,7 @@ int evergreen_blit_prepare_copy(struct radeon_device *rdev, int size_bytes) /* calculate number of loops correctly */ ring_size = num_loops * dwords_per_loop; /* set default + shaders */ - ring_size += 52; /* shaders + def state */ + ring_size += 55; /* shaders + def state */ ring_size += 10; /* fence emit for VB IB */ ring_size += 5; /* done copy */ ring_size += 10; /* fence emit for done copy */ -- cgit v0.10.2 From 3a36199114de0e60984534776732e0a7a220e29e Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 19 Jun 2011 16:56:29 +0900 Subject: nilfs2: remove resize from unsupported features list Resize feature was supported by the commit 4e33f9eab07e but it was not reflected to the list of unsupported features in nilfs2.txt file. This updates the list to fix discrepancy. Signed-off-by: Ryusuke Konishi diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt index d5c0cef..873a2ab 100644 --- a/Documentation/filesystems/nilfs2.txt +++ b/Documentation/filesystems/nilfs2.txt @@ -40,7 +40,6 @@ Features which NILFS2 does not support yet: - POSIX ACLs - quotas - fsck - - resize - defragmentation Mount options -- cgit v0.10.2 From b0d304172f49061b4ff78f9e2b02719ac69c8a7e Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sun, 10 Jul 2011 15:57:35 -0700 Subject: rcu: Prevent RCU callbacks from executing before scheduler initialized Under some rare but real combinations of configuration parameters, RCU callbacks are posted during early boot that use kernel facilities that are not yet initialized. Therefore, when these callbacks are invoked, hard hangs and crashes ensue. This commit therefore prevents RCU callbacks from being invoked until after the scheduler is fully up and running, as in after multiple tasks have been spawned. It might well turn out that a better approach is to identify the specific RCU callbacks that are causing this problem, but that discussion will wait until such time as someone really needs an RCU callback to be invoked (as opposed to merely registered) during early boot. Reported-by: julie Sullivan Reported-by: RKK Signed-off-by: Paul E. McKenney Tested-by: Konrad Rzeszutek Wilk Tested-by: julie Sullivan Tested-by: RKK diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 7e59ffb..ba06207 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -84,9 +84,32 @@ DEFINE_PER_CPU(struct rcu_data, rcu_bh_data); static struct rcu_state *rcu_state; +/* + * The rcu_scheduler_active variable transitions from zero to one just + * before the first task is spawned. So when this variable is zero, RCU + * can assume that there is but one task, allowing RCU to (for example) + * optimized synchronize_sched() to a simple barrier(). When this variable + * is one, RCU must actually do all the hard work required to detect real + * grace periods. This variable is also used to suppress boot-time false + * positives from lockdep-RCU error checking. + */ int rcu_scheduler_active __read_mostly; EXPORT_SYMBOL_GPL(rcu_scheduler_active); +/* + * The rcu_scheduler_fully_active variable transitions from zero to one + * during the early_initcall() processing, which is after the scheduler + * is capable of creating new tasks. So RCU processing (for example, + * creating tasks for RCU priority boosting) must be delayed until after + * rcu_scheduler_fully_active transitions from zero to one. We also + * currently delay invocation of any RCU callbacks until after this point. + * + * It might later prove better for people registering RCU callbacks during + * early boot to take responsibility for these callbacks, but one step at + * a time. + */ +static int rcu_scheduler_fully_active __read_mostly; + #ifdef CONFIG_RCU_BOOST /* @@ -98,7 +121,6 @@ DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status); DEFINE_PER_CPU(int, rcu_cpu_kthread_cpu); DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops); DEFINE_PER_CPU(char, rcu_cpu_has_work); -static char rcu_kthreads_spawnable; #endif /* #ifdef CONFIG_RCU_BOOST */ @@ -1467,6 +1489,8 @@ static void rcu_process_callbacks(struct softirq_action *unused) */ static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) { + if (unlikely(!ACCESS_ONCE(rcu_scheduler_fully_active))) + return; if (likely(!rsp->boost)) { rcu_do_batch(rsp, rdp); return; diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 14dc7dd..75113cb 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1532,7 +1532,7 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu) struct sched_param sp; struct task_struct *t; - if (!rcu_kthreads_spawnable || + if (!rcu_scheduler_fully_active || per_cpu(rcu_cpu_kthread_task, cpu) != NULL) return 0; t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu); @@ -1639,7 +1639,7 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp, struct sched_param sp; struct task_struct *t; - if (!rcu_kthreads_spawnable || + if (!rcu_scheduler_fully_active || rnp->qsmaskinit == 0) return 0; if (rnp->node_kthread_task == NULL) { @@ -1665,7 +1665,7 @@ static int __init rcu_spawn_kthreads(void) int cpu; struct rcu_node *rnp; - rcu_kthreads_spawnable = 1; + rcu_scheduler_fully_active = 1; for_each_possible_cpu(cpu) { per_cpu(rcu_cpu_has_work, cpu) = 0; if (cpu_online(cpu)) @@ -1687,7 +1687,7 @@ static void __cpuinit rcu_prepare_kthreads(int cpu) struct rcu_node *rnp = rdp->mynode; /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */ - if (rcu_kthreads_spawnable) { + if (rcu_scheduler_fully_active) { (void)rcu_spawn_one_cpu_kthread(cpu); if (rnp->node_kthread_task == NULL) (void)rcu_spawn_one_node_kthread(rcu_state, rnp); @@ -1726,6 +1726,13 @@ static void rcu_cpu_kthread_setrt(int cpu, int to_rt) { } +static int __init rcu_scheduler_really_started(void) +{ + rcu_scheduler_fully_active = 1; + return 0; +} +early_initcall(rcu_scheduler_really_started); + static void __cpuinit rcu_prepare_kthreads(int cpu) { } -- cgit v0.10.2 From 07e49a7a31153a95caa270d8ad7350a0bcd4d511 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 6 Jul 2011 20:44:25 +0200 Subject: ACPI: Fix lockdep false positives in acpi_power_off() All ACPICA locks are allocated by the same function, acpi_os_create_lock(), with the help of a local variable called "lock". Thus, when lockdep is enabled, it uses "lock" as the name of all those locks and regards them as instances of the same lock, which causes it to report possible locking problems with them when there aren't any. To work around this problem, define acpi_os_create_lock() as a macro and make it pass its argument to spin_lock_init(), so that lockdep uses it as the name of the new lock. Define this macron in a Linux-specific file, to minimize the resulting modifications of the OS-independent ACPICA parts. This change is based on an earlier patch from Andrea Righi and it addresses a regression from 2.6.39 tracked as https://bugzilla.kernel.org/show_bug.cgi?id=38152 Signed-off-by: Rafael J. Wysocki Reported-and-tested-by: Borislav Petkov Tested-by: Andrea Righi Reviewed-by: Florian Mickler Signed-off-by: Len Brown diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 52ca964..372f9b7 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1333,23 +1333,6 @@ int acpi_resources_are_enforced(void) EXPORT_SYMBOL(acpi_resources_are_enforced); /* - * Create and initialize a spinlock. - */ -acpi_status -acpi_os_create_lock(acpi_spinlock *out_handle) -{ - spinlock_t *lock; - - lock = ACPI_ALLOCATE(sizeof(spinlock_t)); - if (!lock) - return AE_NO_MEMORY; - spin_lock_init(lock); - *out_handle = lock; - - return AE_OK; -} - -/* * Deallocate the memory for a spinlock. */ void acpi_os_delete_lock(acpi_spinlock handle) diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index a756bc8..4543b6f 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -98,8 +98,11 @@ acpi_os_table_override(struct acpi_table_header *existing_table, /* * Spinlock primitives */ + +#ifndef acpi_os_create_lock acpi_status acpi_os_create_lock(acpi_spinlock *out_handle); +#endif void acpi_os_delete_lock(acpi_spinlock handle); diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index 5d2a5e9..2ce1be9 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -159,6 +159,24 @@ static inline void *acpi_os_acquire_object(acpi_cache_t * cache) } while (0) #endif +/* + * When lockdep is enabled, the spin_lock_init() macro stringifies it's + * argument and uses that as a name for the lock in debugging. + * By executing spin_lock_init() in a macro the key changes from "lock" for + * all locks to the name of the argument of acpi_os_create_lock(), which + * prevents lockdep from reporting false positives for ACPICA locks. + */ +#define acpi_os_create_lock(__handle) \ +({ \ + spinlock_t *lock = ACPI_ALLOCATE(sizeof(*lock)); \ + \ + if (lock) { \ + *(__handle) = lock; \ + spin_lock_init(*(__handle)); \ + } \ + lock ? AE_OK : AE_NO_MEMORY; \ +}) + #endif /* __KERNEL__ */ #endif /* __ACLINUX_H__ */ -- cgit v0.10.2 From f39b2dd9d065151a04f5996656d1f27a7eb32d45 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Thu, 7 Jul 2011 09:04:55 -0700 Subject: mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity Tested-by: Jaehoon Chung Signed-off-by: Chris Ball diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 2a7e43b..aa7d1d7 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -247,12 +247,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) return 0; /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */ + card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE]; if (card->csd.structure == 3) { - int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE]; - if (ext_csd_struct > 2) { + if (card->ext_csd.raw_ext_csd_structure > 2) { printk(KERN_ERR "%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), - ext_csd_struct); + card->ext_csd.raw_ext_csd_structure); err = -EINVAL; goto out; } @@ -266,6 +266,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) goto out; } + card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; + card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; + card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2]; + card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3]; if (card->ext_csd.rev >= 2) { card->ext_csd.sectors = ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | @@ -277,7 +281,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512) mmc_card_set_blockaddr(card); } - + card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) { case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: @@ -307,6 +311,11 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) mmc_hostname(card->host)); } + card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.raw_erase_timeout_mult = + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.raw_hc_erase_grp_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; if (card->ext_csd.rev >= 3) { u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG]; @@ -334,6 +343,16 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) card->ext_csd.boot_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; } + card->ext_csd.raw_hc_erase_gap_size = + ext_csd[EXT_CSD_PARTITION_ATTRIBUTE]; + card->ext_csd.raw_sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.raw_sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.raw_sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.raw_trim_mult = + ext_csd[EXT_CSD_TRIM_MULT]; if (card->ext_csd.rev >= 4) { /* * Enhanced area feature support -- check whether the eMMC @@ -341,7 +360,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) * area offset and size to user by adding sysfs interface. */ if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && - (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { u8 hc_erase_grp_sz = ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; u8 hc_wp_grp_sz = @@ -401,17 +420,17 @@ static inline void mmc_free_ext_csd(u8 *ext_csd) } -static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd, - unsigned bus_width) +static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) { u8 *bw_ext_csd; int err; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + err = mmc_get_ext_csd(card, &bw_ext_csd); - if (err) - return err; - if ((ext_csd == NULL || bw_ext_csd == NULL)) { + if (err || bw_ext_csd == NULL) { if (bus_width != MMC_BUS_WIDTH_1) err = -EINVAL; goto out; @@ -421,35 +440,40 @@ static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd, goto out; /* only compare read only fields */ - err = (!(ext_csd[EXT_CSD_PARTITION_SUPPORT] == + err = (!(card->ext_csd.raw_partition_support == bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) && - (ext_csd[EXT_CSD_ERASED_MEM_CONT] == + (card->ext_csd.raw_erased_mem_count == bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) && - (ext_csd[EXT_CSD_REV] == + (card->ext_csd.rev == bw_ext_csd[EXT_CSD_REV]) && - (ext_csd[EXT_CSD_STRUCTURE] == + (card->ext_csd.raw_ext_csd_structure == bw_ext_csd[EXT_CSD_STRUCTURE]) && - (ext_csd[EXT_CSD_CARD_TYPE] == + (card->ext_csd.raw_card_type == bw_ext_csd[EXT_CSD_CARD_TYPE]) && - (ext_csd[EXT_CSD_S_A_TIMEOUT] == + (card->ext_csd.raw_s_a_timeout == bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) && - (ext_csd[EXT_CSD_HC_WP_GRP_SIZE] == + (card->ext_csd.raw_hc_erase_gap_size == bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) && - (ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT] == + (card->ext_csd.raw_erase_timeout_mult == bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) && - (ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] == + (card->ext_csd.raw_hc_erase_grp_size == bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) && - (ext_csd[EXT_CSD_SEC_TRIM_MULT] == + (card->ext_csd.raw_sec_trim_mult == bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) && - (ext_csd[EXT_CSD_SEC_ERASE_MULT] == + (card->ext_csd.raw_sec_erase_mult == bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) && - (ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT] == + (card->ext_csd.raw_sec_feature_support == bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) && - (ext_csd[EXT_CSD_TRIM_MULT] == + (card->ext_csd.raw_trim_mult == bw_ext_csd[EXT_CSD_TRIM_MULT]) && - memcmp(&ext_csd[EXT_CSD_SEC_CNT], - &bw_ext_csd[EXT_CSD_SEC_CNT], - 4) != 0); + (card->ext_csd.raw_sectors[0] == + bw_ext_csd[EXT_CSD_SEC_CNT + 0]) && + (card->ext_csd.raw_sectors[1] == + bw_ext_csd[EXT_CSD_SEC_CNT + 1]) && + (card->ext_csd.raw_sectors[2] == + bw_ext_csd[EXT_CSD_SEC_CNT + 2]) && + (card->ext_csd.raw_sectors[3] == + bw_ext_csd[EXT_CSD_SEC_CNT + 3])); if (err) err = -EINVAL; @@ -770,7 +794,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, */ if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) err = mmc_compare_ext_csds(card, - ext_csd, bus_width); else err = mmc_bus_test(card, bus_width); diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index c6927a4..6ad4355 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -64,6 +64,19 @@ struct mmc_ext_csd { unsigned long long enhanced_area_offset; /* Units: Byte */ unsigned int enhanced_area_size; /* Units: KB */ unsigned int boot_size; /* in bytes */ + u8 raw_partition_support; /* 160 */ + u8 raw_erased_mem_count; /* 181 */ + u8 raw_ext_csd_structure; /* 194 */ + u8 raw_card_type; /* 196 */ + u8 raw_s_a_timeout; /* 217 */ + u8 raw_hc_erase_gap_size; /* 221 */ + u8 raw_erase_timeout_mult; /* 223 */ + u8 raw_hc_erase_grp_size; /* 224 */ + u8 raw_sec_trim_mult; /* 229 */ + u8 raw_sec_erase_mult; /* 230 */ + u8 raw_sec_feature_support;/* 231 */ + u8 raw_trim_mult; /* 232 */ + u8 raw_sectors[4]; /* 212 - 4 bytes */ }; struct sd_scr { -- cgit v0.10.2 From 42a741dcf1472cea55193ea8611db3d67808ce22 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 30 Jun 2011 14:31:04 -0300 Subject: [media] media: fix radio-sf16fmr2 build when SND is not enabled When CONFIG_SND is not enabled, radio-sf16fmr2 build fails with: so make this driver depend on SND. Signed-off-by: Randy Dunlap Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Cc: linux-media@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 0aeed28..52798a1 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -201,7 +201,7 @@ config RADIO_SF16FMI config RADIO_SF16FMR2 tristate "SF16FMR2 Radio" - depends on ISA && VIDEO_V4L2 + depends on ISA && VIDEO_V4L2 && SND ---help--- Choose Y here if you have one of these FM radio cards. -- cgit v0.10.2 From 2d1969312d6319d28ae9609a84f969b6933bd51c Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 4 Jul 2011 21:55:01 -0300 Subject: [media] dvb_frontend: fix race condition in stopping/starting frontend Attached is a patch which addresses a race condition in the DVB core related to closing/reopening the DVB frontend device in quick succession. This is the reason that devices such as the HVR-1300, HVR-3000, and HVR-4000 have been failing to scan properly under MythTV and w_scan. The gory details of the race are described in the patch. Devin There is a race condition exhibited when channel scanners such as w_scan and MythTV quickly close and then reopen the frontend device node. Under normal conditions, the behavior is as follows: 1. Application closes the device node 2. DVB frontend ioctl calls dvb_frontend_release which sets fepriv->release_jiffies 3. DVB frontend thread *eventually* calls dvb_frontend_is_exiting() which compares fepriv->release_jiffies, and shuts down the thread if timeout has expired 4. Thread goes away 5. Application opens frontend device 6. DVB frontend ioctl() calls ts_bus_ctrl(1) 7. DVB frontend ioctl() creates new frontend thread, which calls dvb_frontend_init(), which has demod driver init() routine setup initial register state for demod chip. 8. Tuning request is issued. The race occurs when the application in step 5 performs the new open() call before the frontend thread is shutdown. In this case the ts_bus_ctrl() call is made, which strobes the RESET pin on the demodulator, but the dvb_frontend_init() function never gets called because the frontend thread hasn't gone away yet. As a result, the initial register config for the demod is *never* setup, causing subsequent tuning requests to fail. If there is time between the close and open (enough for the dvb frontend thread to be torn down), then in that case the new frontend thread is created and thus the dvb_frontend_init() function does get called. The fix is to set the flag which forces reinitialization if we did in fact call ts_bus_ctrl(). This problem has been seen on the HVR-1300, HVR-3000, and HVR-4000, and is likely occuring on other designs as well where ts_bus_ctrl() actually strobes the reset pin on the demodulator. Note that this patch should supercede any patches submitted for the 1300/3000/4000 which remove the code that removes GPIO code in cx8802_dvb_advise_acquire(), which have been circulating by users for some time now... Canonical tracking this issue in Launchpad 439163: Thanks to Jon Sayers from Hauppauge and Florent Audebert from Anevia S.A. for providing hardware to test/debug with. Signed-off-by: Devin Heitmueller Cc: Jon Sayers Cc: Florent Audebert Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 9827804..5b6b451 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1988,6 +1988,14 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) { if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0) goto err0; + + /* If we took control of the bus, we need to force + reinitialization. This is because many ts_bus_ctrl() + functions strobe the RESET pin on the demod, and if the + frontend thread already exists then the dvb_init() routine + won't get called (which is what usually does initial + register configuration). */ + fepriv->reinitialise = 1; } if ((ret = dvb_generic_open (inode, file)) < 0) -- cgit v0.10.2 From a1ad5ec7f520c559becab2e989a397f1d6ac5eb0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 13 Jul 2011 01:23:11 -0300 Subject: [media] tuner-core: fix a 2.6.39 regression with mt20xx As Simon reported, digital TV broke with mt20xx tuner due to commit ad020dc2fe9039628cf6cef42cd1b76531ee8411. The mt20xx tuner passes V4L2_TUNER_DIGITAL_TV to tuner core. However, the check_mode code now doesn't handle it well. Change the logic there to avoid the breakage, and fix a test for analog-only at g_tuner. Reported-by: Simon Arlott Tested-by: Simon Arlott Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index cfa9f7e..a03945a 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -714,10 +714,19 @@ static int tuner_remove(struct i2c_client *client) * returns 0. * This function is needed for boards that have a separate tuner for * radio (like devices with tea5767). + * NOTE: mt20xx uses V4L2_TUNER_DIGITAL_TV and calls set_tv_freq to + * select a TV frequency. So, t_mode = T_ANALOG_TV could actually + * be used to represent a Digital TV too. */ static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode) { - if ((1 << mode & t->mode_mask) == 0) + int t_mode; + if (mode == V4L2_TUNER_RADIO) + t_mode = T_RADIO; + else + t_mode = T_ANALOG_TV; + + if ((t_mode & t->mode_mask) == 0) return -EINVAL; return 0; @@ -984,7 +993,7 @@ static void tuner_status(struct dvb_frontend *fe) case V4L2_TUNER_RADIO: p = "radio"; break; - case V4L2_TUNER_DIGITAL_TV: + case V4L2_TUNER_DIGITAL_TV: /* Used by mt20xx */ p = "digital TV"; break; case V4L2_TUNER_ANALOG_TV: @@ -1135,9 +1144,8 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) return 0; if (vt->type == t->mode && analog_ops->get_afc) vt->afc = analog_ops->get_afc(&t->fe); - if (vt->type == V4L2_TUNER_ANALOG_TV) + if (t->mode != V4L2_TUNER_RADIO) { vt->capability |= V4L2_TUNER_CAP_NORM; - if (vt->type != V4L2_TUNER_RADIO) { vt->rangelow = tv_range[0] * 16; vt->rangehigh = tv_range[1] * 16; return 0; -- cgit v0.10.2 From 4d2b2956ef1113f1cc43e98e947c20d9c7d2712c Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 13 Jul 2011 13:14:12 +0800 Subject: ACPI, APEI, HEST, Detect duplicated hardware error source ID The firmware on some machine will report duplicated hardware error source ID in HEST. This is considered a firmware bug. To provide better warning message, this patch adds duplicated hardware error source ID detecting and corresponding printk. This patch fixes #37412 on kernel bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37412 Reported-by: marconifabio@ubuntu-it.org Signed-off-by: Huang Ying Tested-by: Mathias Signed-off-by: Len Brown diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index abda378..181bc2f 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -139,13 +139,23 @@ static int __init hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data) { struct platform_device *ghes_dev; struct ghes_arr *ghes_arr = data; - int rc; + int rc, i; if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR) return 0; if (!((struct acpi_hest_generic *)hest_hdr)->enabled) return 0; + for (i = 0; i < ghes_arr->count; i++) { + struct acpi_hest_header *hdr; + ghes_dev = ghes_arr->ghes_devs[i]; + hdr = *(struct acpi_hest_header **)ghes_dev->dev.platform_data; + if (hdr->source_id == hest_hdr->source_id) { + pr_warning(FW_WARN HEST_PFX "Duplicated hardware error source ID: %d.\n", + hdr->source_id); + return -EIO; + } + } ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id); if (!ghes_dev) return -ENOMEM; -- cgit v0.10.2 From b4a03b9aa96cc186bf3cfd7a55cb7d7227f0cf4d Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 1 Jun 2011 23:54:02 +0800 Subject: ACPI: Fixes device power states array overflow MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 28c2103 added new state ACPI_STATE_D3_COLD, so the device power states array must be expanded by one also. v2: Use ACPI_D_STATE_COUNT instead of number 5 for the array size. Reported-by: Dan Carpenter Suggested-by: Oldřich Jedlička Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 3a10ef5..6cd5b64 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -210,7 +210,7 @@ struct acpi_device_power_state { struct acpi_device_power { int state; /* Current state */ struct acpi_device_power_flags flags; - struct acpi_device_power_state states[4]; /* Power states (D0-D3) */ + struct acpi_device_power_state states[ACPI_D_STATE_COUNT]; /* Power states (D0-D3Cold) */ }; /* Performance Management */ -- cgit v0.10.2 From 380f7c65a7eb3288e4b6812acf3474a1de230707 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 14 Jul 2011 08:59:44 +0100 Subject: GFS2: Resolve inode eviction and ail list interaction bug This patch contains a few misc fixes which resolve a recently reported issue. This patch has been a real team effort and has received a lot of testing. The first issue is that the ail lock needs to be held over a few more operations. The lock thats added into gfs2_releasepage() may possibly be a candidate for replacing with RCU at some future point, but at this stage we've gone for the obvious fix. The second issue is that gfs2_write_inode() can end up calling a glock recursively when called from gfs2_evict_inode() via the syncing code, so it needs a guard added. The third issue is that we either need to not truncate the metadata pages of inodes which have zero link count, but which we cannot deallocate due to them still being in use by other nodes, or we need to ensure that those pages have all made it through the journal and ail lists first. This patch takes the former approach, but the latter has also been tested and there is nothing to choose between them performance-wise. So again, we could revise that decision in the future. Also, the inode eviction process is now better documented. Signed-off-by: Steven Whitehouse Tested-by: Bob Peterson Tested-by: Abhijith Das Reported-by: Barry J. Marson Reported-by: David Teigland diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c index 802ac5e..f9fbbe9 100644 --- a/fs/gfs2/aops.c +++ b/fs/gfs2/aops.c @@ -1069,6 +1069,7 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask) return 0; gfs2_log_lock(sdp); + spin_lock(&sdp->sd_ail_lock); head = bh = page_buffers(page); do { if (atomic_read(&bh->b_count)) @@ -1080,6 +1081,7 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask) goto not_possible; bh = bh->b_this_page; } while(bh != head); + spin_unlock(&sdp->sd_ail_lock); gfs2_log_unlock(sdp); head = bh = page_buffers(page); @@ -1112,6 +1114,7 @@ not_possible: /* Should never happen */ WARN_ON(buffer_dirty(bh)); WARN_ON(buffer_pinned(bh)); cannot_release: + spin_unlock(&sdp->sd_ail_lock); gfs2_log_unlock(sdp); return 0; } diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index 712b722..2cca293 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -47,10 +47,10 @@ static void __gfs2_ail_flush(struct gfs2_glock *gl) bd_ail_gl_list); bh = bd->bd_bh; gfs2_remove_from_ail(bd); - spin_unlock(&sdp->sd_ail_lock); - bd->bd_bh = NULL; bh->b_private = NULL; + spin_unlock(&sdp->sd_ail_lock); + bd->bd_blkno = bh->b_blocknr; gfs2_log_lock(sdp); gfs2_assert_withdraw(sdp, !buffer_busy(bh)); diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 903115f..85c6292 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -903,6 +903,7 @@ void gfs2_meta_syncfs(struct gfs2_sbd *sdp) if (gfs2_ail1_empty(sdp)) break; } + gfs2_log_flush(sdp, NULL); } static inline int gfs2_jrnl_flush_reqd(struct gfs2_sbd *sdp) diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index ed540e7..fb0edf7 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -757,13 +757,17 @@ static int gfs2_write_inode(struct inode *inode, struct writeback_control *wbc) struct timespec atime; struct gfs2_dinode *di; int ret = -EAGAIN; + int unlock_required = 0; /* Skip timestamp update, if this is from a memalloc */ if (current->flags & PF_MEMALLOC) goto do_flush; - ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh); - if (ret) - goto do_flush; + if (!gfs2_glock_is_locked_by_me(ip->i_gl)) { + ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh); + if (ret) + goto do_flush; + unlock_required = 1; + } ret = gfs2_trans_begin(sdp, RES_DINODE, 0); if (ret) goto do_unlock; @@ -780,7 +784,8 @@ static int gfs2_write_inode(struct inode *inode, struct writeback_control *wbc) } gfs2_trans_end(sdp); do_unlock: - gfs2_glock_dq_uninit(&gh); + if (unlock_required) + gfs2_glock_dq_uninit(&gh); do_flush: if (wbc->sync_mode == WB_SYNC_ALL) gfs2_log_flush(GFS2_SB(inode), ip->i_gl); @@ -1427,7 +1432,20 @@ out: return error; } -/* +/** + * gfs2_evict_inode - Remove an inode from cache + * @inode: The inode to evict + * + * There are three cases to consider: + * 1. i_nlink == 0, we are final opener (and must deallocate) + * 2. i_nlink == 0, we are not the final opener (and cannot deallocate) + * 3. i_nlink > 0 + * + * If the fs is read only, then we have to treat all cases as per #3 + * since we are unable to do any deallocation. The inode will be + * deallocated by the next read/write node to attempt an allocation + * in the same resource group + * * We have to (at the moment) hold the inodes main lock to cover * the gap between unlocking the shared lock on the iopen lock and * taking the exclusive lock. I'd rather do a shared -> exclusive @@ -1470,6 +1488,8 @@ static void gfs2_evict_inode(struct inode *inode) if (error) goto out_truncate; + /* Case 1 starts here */ + if (S_ISDIR(inode->i_mode) && (ip->i_diskflags & GFS2_DIF_EXHASH)) { error = gfs2_dir_exhash_dealloc(ip); @@ -1493,13 +1513,16 @@ static void gfs2_evict_inode(struct inode *inode) goto out_unlock; out_truncate: + /* Case 2 starts here */ error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks); if (error) goto out_unlock; - gfs2_final_release_pages(ip); + /* Needs to be done before glock release & also in a transaction */ + truncate_inode_pages(&inode->i_data, 0); gfs2_trans_end(sdp); out_unlock: + /* Error path for case 1 */ if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) gfs2_glock_dq(&ip->i_iopen_gh); gfs2_holder_uninit(&ip->i_iopen_gh); @@ -1507,6 +1530,7 @@ out_unlock: if (error && error != GLR_TRYFAILED && error != -EROFS) fs_warn(sdp, "gfs2_evict_inode: %d\n", error); out: + /* Case 3 starts here */ truncate_inode_pages(&inode->i_data, 0); end_writeback(inode); -- cgit v0.10.2 From b73c43f884b1b26ef8e824a33f3924f92e493c11 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 13 Jul 2011 14:10:29 +0000 Subject: net: sctp: fix checksum marking for outgoing packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Packets to devices without NETIF_F_SCTP_CSUM (including NETIF_F_NO_CSUM) should be properly checksummed because the packets can be diverted or rerouted after construction. This still leaves packets diverted from NETIF_F_SCTP_CSUM-enabled devices with broken checksums. Fixing this needs implementing software offload fallback in networking core. For users of sctp_checksum_disable, skb->ip_summed should be left as CHECKSUM_NONE and not CHECKSUM_UNNECESSARY as per include/linux/skbuff.h. Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller diff --git a/net/sctp/output.c b/net/sctp/output.c index b4f3cf0..08b3cea 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -500,23 +500,20 @@ int sctp_packet_transmit(struct sctp_packet *packet) * Note: Adler-32 is no longer applicable, as has been replaced * by CRC32-C as described in . */ - if (!sctp_checksum_disable && - !(dst->dev->features & (NETIF_F_NO_CSUM | NETIF_F_SCTP_CSUM))) { - __u32 crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len); + if (!sctp_checksum_disable) { + if (!(dst->dev->features & NETIF_F_SCTP_CSUM)) { + __u32 crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len); - /* 3) Put the resultant value into the checksum field in the - * common header, and leave the rest of the bits unchanged. - */ - sh->checksum = sctp_end_cksum(crc32); - } else { - if (dst->dev->features & NETIF_F_SCTP_CSUM) { + /* 3) Put the resultant value into the checksum field in the + * common header, and leave the rest of the bits unchanged. + */ + sh->checksum = sctp_end_cksum(crc32); + } else { /* no need to seed pseudo checksum for SCTP */ nskb->ip_summed = CHECKSUM_PARTIAL; nskb->csum_start = (skb_transport_header(nskb) - nskb->head); nskb->csum_offset = offsetof(struct sctphdr, checksum); - } else { - nskb->ip_summed = CHECKSUM_UNNECESSARY; } } -- cgit v0.10.2 From 62f2a3a48bdc99822a24356e667e52c30df287c9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Wed, 13 Jul 2011 14:10:29 +0000 Subject: net: remove NETIF_F_ALL_TX_OFFLOADS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is no software fallback implemented for SCTP or FCoE checksumming, and so it should not be passed on by software devices like bridge or bonding. For VLAN devices, this is different. First, the driver for underlying device should be prepared to get offloaded packets even when the feature is disabled (especially if it advertises it in vlan_features). Second, devices under VLANs do not get replaced without tearing down the VLAN first. This fixes a mess I accidentally introduced while converting bonding to ndo_fix_features. NETIF_F_SOFT_FEATURES are removed from BOND_VLAN_FEATURES because they are unused as of commit 712ae51afd. Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index eafe44a..63c22b0 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1428,9 +1428,9 @@ out: return features; } -#define BOND_VLAN_FEATURES (NETIF_F_ALL_TX_OFFLOADS | \ - NETIF_F_SOFT_FEATURES | \ - NETIF_F_LRO) +#define BOND_VLAN_FEATURES (NETIF_F_ALL_CSUM | NETIF_F_SG | \ + NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \ + NETIF_F_HIGHDMA | NETIF_F_LRO) static void bond_compute_features(struct bonding *bond) { diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 54b8b4d..9e19477 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1097,12 +1097,6 @@ struct net_device { #define NETIF_F_ALL_FCOE (NETIF_F_FCOE_CRC | NETIF_F_FCOE_MTU | \ NETIF_F_FSO) -#define NETIF_F_ALL_TX_OFFLOADS (NETIF_F_ALL_CSUM | NETIF_F_SG | \ - NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \ - NETIF_F_HIGHDMA | \ - NETIF_F_SCTP_CSUM | \ - NETIF_F_ALL_FCOE) - /* * If one device supports one of these features, then enable them * for all in netdev_increment_features. diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 86bff9b..6e82148 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -528,7 +528,11 @@ static int vlan_dev_init(struct net_device *dev) (1<<__LINK_STATE_DORMANT))) | (1<<__LINK_STATE_PRESENT); - dev->hw_features = NETIF_F_ALL_TX_OFFLOADS; + dev->hw_features = NETIF_F_ALL_CSUM | NETIF_F_SG | + NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | + NETIF_F_HIGHDMA | NETIF_F_SCTP_CSUM | + NETIF_F_ALL_FCOE; + dev->features |= real_dev->vlan_features | NETIF_F_LLTX; dev->gso_max_size = real_dev->gso_max_size; -- cgit v0.10.2 From 1836750115f20b774e55c032a3893e8c5bdf41ed Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 12 Jul 2011 21:42:24 -0400 Subject: fix loop checks in d_materialise_unique() Both __d_unalias() and __d_materialise_dentry() need loop prevention. Grab rename_lock in caller, check for loops there... As a side benefit, we have dentry_lock_for_move() called only under rename_lock, which seriously reduces deadlock potential of the execrable "locking order" used for ->d_lock. Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index 37f72ee..6e4ea6d 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -2213,14 +2213,15 @@ static void dentry_unlock_parents_for_move(struct dentry *dentry, * The hash value has to match the hash queue that the dentry is on.. */ /* - * d_move - move a dentry + * __d_move - move a dentry * @dentry: entry to move * @target: new dentry * * Update the dcache to reflect the move of a file name. Negative - * dcache entries should not be moved in this way. + * dcache entries should not be moved in this way. Caller hold + * rename_lock. */ -void d_move(struct dentry * dentry, struct dentry * target) +static void __d_move(struct dentry * dentry, struct dentry * target) { if (!dentry->d_inode) printk(KERN_WARNING "VFS: moving negative dcache entry\n"); @@ -2228,8 +2229,6 @@ void d_move(struct dentry * dentry, struct dentry * target) BUG_ON(d_ancestor(dentry, target)); BUG_ON(d_ancestor(target, dentry)); - write_seqlock(&rename_lock); - dentry_lock_for_move(dentry, target); write_seqcount_begin(&dentry->d_seq); @@ -2275,6 +2274,20 @@ void d_move(struct dentry * dentry, struct dentry * target) spin_unlock(&target->d_lock); fsnotify_d_move(dentry); spin_unlock(&dentry->d_lock); +} + +/* + * d_move - move a dentry + * @dentry: entry to move + * @target: new dentry + * + * Update the dcache to reflect the move of a file name. Negative + * dcache entries should not be moved in this way. + */ +void d_move(struct dentry *dentry, struct dentry *target) +{ + write_seqlock(&rename_lock); + __d_move(dentry, target); write_sequnlock(&rename_lock); } EXPORT_SYMBOL(d_move); @@ -2302,7 +2315,7 @@ struct dentry *d_ancestor(struct dentry *p1, struct dentry *p2) * This helper attempts to cope with remotely renamed directories * * It assumes that the caller is already holding - * dentry->d_parent->d_inode->i_mutex and the inode->i_lock + * dentry->d_parent->d_inode->i_mutex, inode->i_lock and rename_lock * * Note: If ever the locking in lock_rename() changes, then please * remember to update this too... @@ -2317,11 +2330,6 @@ static struct dentry *__d_unalias(struct inode *inode, if (alias->d_parent == dentry->d_parent) goto out_unalias; - /* Check for loops */ - ret = ERR_PTR(-ELOOP); - if (d_ancestor(alias, dentry)) - goto out_err; - /* See lock_rename() */ ret = ERR_PTR(-EBUSY); if (!mutex_trylock(&dentry->d_sb->s_vfs_rename_mutex)) @@ -2331,7 +2339,7 @@ static struct dentry *__d_unalias(struct inode *inode, goto out_err; m2 = &alias->d_parent->d_inode->i_mutex; out_unalias: - d_move(alias, dentry); + __d_move(alias, dentry); ret = alias; out_err: spin_unlock(&inode->i_lock); @@ -2416,15 +2424,24 @@ struct dentry *d_materialise_unique(struct dentry *dentry, struct inode *inode) alias = __d_find_alias(inode, 0); if (alias) { actual = alias; - /* Is this an anonymous mountpoint that we could splice - * into our tree? */ - if (IS_ROOT(alias)) { + write_seqlock(&rename_lock); + + if (d_ancestor(alias, dentry)) { + /* Check for loops */ + actual = ERR_PTR(-ELOOP); + } else if (IS_ROOT(alias)) { + /* Is this an anonymous mountpoint that we + * could splice into our tree? */ __d_materialise_dentry(dentry, alias); + write_sequnlock(&rename_lock); __d_drop(alias); goto found; + } else { + /* Nope, but we must(!) avoid directory + * aliasing */ + actual = __d_unalias(inode, dentry, alias); } - /* Nope, but we must(!) avoid directory aliasing */ - actual = __d_unalias(inode, dentry, alias); + write_sequnlock(&rename_lock); if (IS_ERR(actual)) dput(alias); goto out_nolock; -- cgit v0.10.2 From b35e160a111aa9ae3fad6294e038be20d0da721b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 15 Jul 2011 22:28:32 +0900 Subject: ASoC: Fix shift in WM8958 accessory detection default implementation Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index c2fc035..5f0c238 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2763,7 +2763,7 @@ static void wm8958_default_micdet(u16 status, void *data) report = SND_JACK_MICROPHONE; /* Everything else is buttons; just assign slots */ - if (status & 0x1c0) + if (status & 0x1c) report |= SND_JACK_BTN_0; done: -- cgit v0.10.2 From 7e97bbba62754ea86e191b99c6978476198ecb99 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 14 Jul 2011 14:18:03 -0700 Subject: hwmon: (adm1275) Fix coefficients per datasheet revision B Coefficients to convert chip register values to voltage/current have been slightly changed in revision B of the chip datasheet. Update driver coefficients to match the coefficients in the datasheet. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare diff --git a/drivers/hwmon/adm1275.c b/drivers/hwmon/adm1275.c index b9b7caf..8bc1bd6 100644 --- a/drivers/hwmon/adm1275.c +++ b/drivers/hwmon/adm1275.c @@ -53,23 +53,23 @@ static int adm1275_probe(struct i2c_client *client, info->direct[PSC_VOLTAGE_IN] = true; info->direct[PSC_VOLTAGE_OUT] = true; info->direct[PSC_CURRENT_OUT] = true; - info->m[PSC_CURRENT_OUT] = 800; + info->m[PSC_CURRENT_OUT] = 807; info->b[PSC_CURRENT_OUT] = 20475; info->R[PSC_CURRENT_OUT] = -1; info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; if (config & ADM1275_VRANGE) { - info->m[PSC_VOLTAGE_IN] = 19045; + info->m[PSC_VOLTAGE_IN] = 19199; info->b[PSC_VOLTAGE_IN] = 0; info->R[PSC_VOLTAGE_IN] = -2; - info->m[PSC_VOLTAGE_OUT] = 19045; + info->m[PSC_VOLTAGE_OUT] = 19199; info->b[PSC_VOLTAGE_OUT] = 0; info->R[PSC_VOLTAGE_OUT] = -2; } else { - info->m[PSC_VOLTAGE_IN] = 6666; + info->m[PSC_VOLTAGE_IN] = 6720; info->b[PSC_VOLTAGE_IN] = 0; info->R[PSC_VOLTAGE_IN] = -1; - info->m[PSC_VOLTAGE_OUT] = 6666; + info->m[PSC_VOLTAGE_OUT] = 6720; info->b[PSC_VOLTAGE_OUT] = 0; info->R[PSC_VOLTAGE_OUT] = -1; } -- cgit v0.10.2 From 0d9b6e738a22244d38def847a24e5ee6fcedd898 Mon Sep 17 00:00:00 2001 From: Michael Thalmeier Date: Fri, 15 Jul 2011 01:28:26 +0000 Subject: r6040: only disable RX interrupt if napi_schedule_prep is successful When receiving the first RX interrupt before the internal call to napi_schedule_prep is successful the RX interrupt gets disabled and is never enabled again as the poll function never gets executed. Signed-off-by: Michael Thalmeier Signed-off-by: David S. Miller diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 200a363..0ffec46 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -677,9 +677,11 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id) if (status & RX_FIFO_FULL) dev->stats.rx_fifo_errors++; - /* Mask off RX interrupt */ - misr &= ~RX_INTS; - napi_schedule(&lp->napi); + if (likely(napi_schedule_prep(&lp->napi))) { + /* Mask off RX interrupt */ + misr &= ~RX_INTS; + __napi_schedule(&lp->napi); + } } /* TX interrupt request */ -- cgit v0.10.2 From e3c1620434ac77b618ce74c024ace3559602ac99 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 15 Jul 2011 14:39:10 +0000 Subject: drm/radeon/kms: add new NI pci ids Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index e08f344..3d53efd 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -182,6 +182,7 @@ {0x1002, 0x6750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6758, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6759, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x675F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6760, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6761, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6762, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ @@ -192,6 +193,7 @@ {0x1002, 0x6767, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6768, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6888, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \ -- cgit v0.10.2 From c64be78ffb415278d7d32d6f55de95c73dcc19a4 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 11 Jul 2011 16:28:50 +0200 Subject: sched: Fix 32bit race Commit 3fe1698b7fe0 ("sched: Deal with non-atomic min_vruntime reads on 32bit") forgot to initialize min_vruntime_copy which could lead to an infinite while loop in task_waking_fair() under some circumstances (early boot, lucky timing). [ This bug was also reported by others that blamed it on the RCU initialization problems ] Reported-and-tested-by: Bruno Wolff III Signed-off-by: Peter Zijlstra Reviewed-by: Paul E. McKenney Signed-off-by: Linus Torvalds diff --git a/kernel/sched.c b/kernel/sched.c index 9769c75..3dc716f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7757,6 +7757,9 @@ static void init_cfs_rq(struct cfs_rq *cfs_rq, struct rq *rq) #endif #endif cfs_rq->min_vruntime = (u64)(-(1LL << 20)); +#ifndef CONFIG_64BIT + cfs_rq->min_vruntime_copy = cfs_rq->min_vruntime; +#endif } static void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq) -- cgit v0.10.2 From 164d5c3988baf61f40c5749ddc063a9cdca8f521 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 10 Jul 2011 15:45:07 +0800 Subject: gpio: wm831x: add a missing break in wm831x_gpio_dbg_show Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Grant Likely diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c index 309644c..2bcfb0b 100644 --- a/drivers/gpio/wm831x-gpio.c +++ b/drivers/gpio/wm831x-gpio.c @@ -180,6 +180,7 @@ static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) break; case WM831X_GPIO_PULL_UP: pull = "pullup"; + break; default: pull = "INVALID PULL"; break; -- cgit v0.10.2 From 84652e834b11d1d279e9073a94b320c85707a880 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 16 Jul 2011 00:59:54 +0200 Subject: PM / MIPS: Convert i8259.c to using syscore_ops The code in arch/mips/kernel/i8259.c still hasn't been converted to using struct syscore_ops instead of a sysdev for resume and shutdown. As a result, this code doesn't build any more after suspend, resume and shutdown callbacks have been removed from struct sysdev_class. Fix this problem by converting i8259.c to using syscore_ops. Reported-and-tested-by: Roland Vossen Signed-off-by: Rafael J. Wysocki Acked-by: Ralf Baechle diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index c018696..5c74eb7 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include @@ -215,14 +215,13 @@ spurious_8259A_irq: } } -static int i8259A_resume(struct sys_device *dev) +static void i8259A_resume(void) { if (i8259A_auto_eoi >= 0) init_8259A(i8259A_auto_eoi); - return 0; } -static int i8259A_shutdown(struct sys_device *dev) +static void i8259A_shutdown(void) { /* Put the i8259A into a quiescent state that * the kernel initialization code can get it @@ -232,26 +231,17 @@ static int i8259A_shutdown(struct sys_device *dev) outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ } - return 0; } -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", +static struct syscore_ops i8259_syscore_ops = { .resume = i8259A_resume, .shutdown = i8259A_shutdown, }; -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - static int __init i8259A_init_sysfs(void) { - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; + register_syscore_ops(&i8259_syscore_ops); + return 0; } device_initcall(i8259A_init_sysfs); -- cgit v0.10.2 From f3dc1586375c3fa061c4867e8b076d09a53beb03 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sebastian=20P=C3=B6hn?= Date: Fri, 15 Jul 2011 16:00:20 -0700 Subject: gianfar: rx parser Only let the rx parser be enabled if it is necessary (if VLAN extraction, IP or TCP checksumming or the rx queue filer are enabled). Otherwise disable it. The new routine gfar_check_rx_parser_mode should be run after every change on this features and will enable/disable the parser as necessary. Signed-off-by: Jiri Pirko Signed-off-by: Sebastian Poehn Signed-off-by: David S. Miller diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 2dfcc80..dfa55f9 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2289,6 +2289,23 @@ static int gfar_set_mac_address(struct net_device *dev) return 0; } +/* Check if rx parser should be activated */ +void gfar_check_rx_parser_mode(struct gfar_private *priv) +{ + struct gfar __iomem *regs; + u32 tempval; + + regs = priv->gfargrp[0].regs; + + tempval = gfar_read(®s->rctrl); + /* If parse is no longer required, then disable parser */ + if (tempval & RCTRL_REQ_PARSER) + tempval |= RCTRL_PRSDEP_INIT; + else + tempval &= ~RCTRL_PRSDEP_INIT; + gfar_write(®s->rctrl, tempval); +} + /* Enables and disables VLAN insertion/extraction */ static void gfar_vlan_rx_register(struct net_device *dev, @@ -2325,12 +2342,9 @@ static void gfar_vlan_rx_register(struct net_device *dev, /* Disable VLAN tag extraction */ tempval = gfar_read(®s->rctrl); tempval &= ~RCTRL_VLEX; - /* If parse is no longer required, then disable parser */ - if (tempval & RCTRL_REQ_PARSER) - tempval |= RCTRL_PRSDEP_INIT; - else - tempval &= ~RCTRL_PRSDEP_INIT; gfar_write(®s->rctrl, tempval); + + gfar_check_rx_parser_mode(priv); } gfar_change_mtu(dev, dev->mtu); diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index ba36dc7..440e69d 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -274,7 +274,7 @@ extern const char gfar_driver_version[]; #define RCTRL_PROM 0x00000008 #define RCTRL_EMEN 0x00000002 #define RCTRL_REQ_PARSER (RCTRL_VLEX | RCTRL_IPCSEN | \ - RCTRL_TUCSEN) + RCTRL_TUCSEN | RCTRL_FILREN) #define RCTRL_CHECKSUMMING (RCTRL_IPCSEN | RCTRL_TUCSEN | \ RCTRL_PRSDEP_INIT) #define RCTRL_EXTHASH (RCTRL_GHTX) @@ -1156,6 +1156,7 @@ extern void gfar_configure_coalescing(struct gfar_private *priv, unsigned long tx_mask, unsigned long rx_mask); void gfar_init_sysfs(struct net_device *dev); int gfar_set_features(struct net_device *dev, u32 features); +extern void gfar_check_rx_parser_mode(struct gfar_private *priv); extern const struct ethtool_ops gfar_ethtool_ops; -- cgit v0.10.2 From 900b170af40b4fef54e89f3d48d055f7d8031ae6 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Fri, 15 Jul 2011 21:33:12 +0200 Subject: ARM: fix regression in IXP4xx clocksource MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 234b6ceddb4fc2a4bc5b9a7670f070f6e69e0868 clocksource: convert ARM 32-bit up counting clocksources broke the build for ixp4xx and made big endian operation impossible. This commit restores the original behaviour. Signed-off-by: Richard Cochran Signed-off-by: Krzysztof Hałasa [ Thomas says that we might want to have generic BE accessor functions to the MMIO clock source, but that hasn't happened yet, so in the meantime this seems to be the short-term fix for the particular problem - Linus ] Signed-off-by: Linus Torvalds diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 74ed81a..0777257 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -419,14 +419,20 @@ static void notrace ixp4xx_update_sched_clock(void) /* * clocksource */ + +static cycle_t ixp4xx_clocksource_read(struct clocksource *c) +{ + return *IXP4XX_OSTS; +} + unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq); - clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32, - clocksource_mmio_readl_up); + clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, + ixp4xx_clocksource_read); } /* -- cgit v0.10.2 From 691abd0abf8fd496c96fdb5b4fb64721f02aa513 Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Sat, 16 Jul 2011 11:13:47 +0900 Subject: ARM: SAMSUNG: Check NULL return from irq_alloc_generic_chip Signed-off-by: Todd Poynor Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 32582c0..38c5364 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -54,6 +54,13 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, handle_level_irq); + + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, uirq->base_irq); + return; + } + ct = gc->chip_types; ct->chip.irq_ack = irq_gc_ack; ct->chip.irq_mask = irq_gc_mask_set_bit; diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index a607546..f714d06 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -54,6 +54,13 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, S3C64XX_TINT_CSTAT, handle_level_irq); + + if (!s3c_tgc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n", + __func__, timer_irq); + return; + } + ct = s3c_tgc->chip_types; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; -- cgit v0.10.2 From 2a75ca4a43e4276e6da2c75bea672a03e8e900fb Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Fri, 15 Jul 2011 23:23:33 +0200 Subject: watchdog: fix hpwdt Kconfig regression in 3.0-rc Remove Kconfig regression caused by commit a4616153deae053b29a2b7dd9ec4b2a225accfc5 "watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled" With the above change applied, hpwdt will be enabled unconditionally by just entering the Watchdog subscreen in menuconfig. Since this driver is not essential to boot any box it should remain disabled until it gets manually enabled, just like all other drivers. Signed-off-by: Olaf Hering Cc: Tony Camuso Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 9536d38..c57419b 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -600,7 +600,6 @@ config IT87_WDT config HP_WATCHDOG tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" depends on X86 - default m help A software monitoring watchdog and NMI sourcing driver. This driver will detect lockups and provide a stack trace. This is a driver that -- cgit v0.10.2 From d670ac019f60e4932ba329bb0800bf2929e6d77c Mon Sep 17 00:00:00 2001 From: Sangwook Lee Date: Sat, 16 Jul 2011 15:50:19 +0900 Subject: ARM: SAMSUNG: DMA Cleanup as per sparse Function declaration differs between file: dma.c and file:dma.h and SPARSE (Documentation/sparse.txt) gives error messages All dma channels are members of 'enum dma_ch' and not 'unsigned int' Please have a look at channel definitions in: arch/arm/mach-s3c64xx/include/mach/dma.h arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h arch/arm/mach-s3c2410/include/mach/dma.h So all arguments should be of type 'enum dma_ch' Signed-off-by: Sangwook Lee Signed-off-by: Kukjin Kim diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index b197171..204bfaf 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -113,7 +113,7 @@ found: return chan; } -int s3c2410_dma_config(unsigned int channel, int xferunit) +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -297,7 +297,7 @@ static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) return 0; } -int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -331,7 +331,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -415,7 +415,7 @@ err_buff: EXPORT_SYMBOL(s3c2410_dma_enqueue); -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -463,7 +463,7 @@ int s3c2410_dma_devconfig(unsigned int channel, EXPORT_SYMBOL(s3c2410_dma_devconfig); -int s3c2410_dma_getposition(unsigned int channel, +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -487,7 +487,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -533,7 +533,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index a79a8cc..539bd0e 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -712,7 +712,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -783,7 +783,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; @@ -974,7 +974,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) } int -s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1021,7 +1021,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * xfersize: size of unit in bytes (1,2,4) */ -int s3c2410_dma_config(unsigned int channel, +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1100,7 +1100,7 @@ EXPORT_SYMBOL(s3c2410_dma_config); * devaddr: physical address of the source */ -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -1173,7 +1173,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); * returns the current transfer points for the dma source and destination */ -int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst) +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c index cb459dd..6143aa1 100644 --- a/arch/arm/plat-samsung/dma.c +++ b/arch/arm/plat-samsung/dma.c @@ -41,7 +41,7 @@ struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) * irq? */ -int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) +int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -56,7 +56,7 @@ int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_opfn); -int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) +int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -71,7 +71,7 @@ int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); -int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) +int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 2e8f8c6..8c273b7 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -42,6 +42,7 @@ struct s3c2410_dma_client { }; struct s3c2410_dma_chan; +enum dma_ch; /* s3c2410_dma_cbfn_t * @@ -62,7 +63,7 @@ typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, * request a dma channel exclusivley */ -extern int s3c2410_dma_request(unsigned int channel, +extern int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *, void *dev); @@ -71,14 +72,14 @@ extern int s3c2410_dma_request(unsigned int channel, * change the state of the dma channel */ -extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); +extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op); /* s3c2410_dma_setflags * * set the channel's flags to a given state */ -extern int s3c2410_dma_setflags(unsigned int channel, +extern int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags); /* s3c2410_dma_free @@ -86,7 +87,7 @@ extern int s3c2410_dma_setflags(unsigned int channel, * free the dma channel (will also abort any outstanding operations) */ -extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); +extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *); /* s3c2410_dma_enqueue * @@ -95,7 +96,7 @@ extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); * drained before the buffer is given to the DMA system. */ -extern int s3c2410_dma_enqueue(unsigned int channel, void *id, +extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size); /* s3c2410_dma_config @@ -103,14 +104,14 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id, * configure the dma channel */ -extern int s3c2410_dma_config(unsigned int channel, int xferunit); +extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); /* s3c2410_dma_devconfig * * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(unsigned int channel, +extern int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition @@ -118,10 +119,10 @@ extern int s3c2410_dma_devconfig(unsigned int channel, * get the position that the dma transfer is currently at */ -extern int s3c2410_dma_getposition(unsigned int channel, +extern int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dest); -extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); +extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); -- cgit v0.10.2 From 9191e6ad897a8b4f0b89aea7c2d3c843f29a8630 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Fri, 15 Jul 2011 18:30:20 +0000 Subject: Bluetooth: Fix regression in L2CAP connection procedure Caused by the following commit, partially revert it. commit 9fa7e4f76f3658ba1f44fbdb95c77e7df3f53f95 Author: Gustavo F. Padovan Date: Thu Jun 30 16:11:30 2011 -0300 Bluetooth: Fix regression with incoming L2CAP connections PTS test A2DP/SRC/SRC_SET/TC_SRC_SET_BV_02_I revealed that ( probably after the df3c3931e commit ) the l2cap connection could not be established in case when the "Auth Complete" HCI event does not arive before the initiator send "Configuration request", in which case l2cap replies with "Command rejected" since the channel is still in BT_CONNECT2 state. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Gustavo F. Padovan Signed-off-by: David S. Miller diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index ebff14c..4fbf67e 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -2323,8 +2323,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr sk = chan->sk; - if ((bt_sk(sk)->defer_setup && sk->sk_state != BT_CONNECT2) || - (!bt_sk(sk)->defer_setup && sk->sk_state != BT_CONFIG)) { + if (sk->sk_state != BT_CONFIG && sk->sk_state != BT_CONNECT2) { struct l2cap_cmd_rej rej; rej.reason = cpu_to_le16(0x0002); -- cgit v0.10.2 From 05e9a2f67849e427f8900bad0a3f2a939e8dd3d6 Mon Sep 17 00:00:00 2001 From: Ilia Kolomisnky Date: Fri, 15 Jul 2011 18:30:21 +0000 Subject: Bluetooth: Fix crash with incoming L2CAP connections Another regression fix considering incomming l2cap connections with defer_setup enabled. In situations when incomming connection is extracted with l2cap_sock_accept, it's bt_sock info will have 'parent' member zerroed, but 'parent' may be used unconditionally in l2cap_conn_start() and l2cap_security_cfm() when defer_setup is enabled. Backtrace: [] (l2cap_security_cfm+0x0/0x2ac [bluetooth]) from [] (hci_event_pac ket+0xc2c/0x4aa4 [bluetooth]) [] (hci_event_packet+0x0/0x4aa4 [bluetooth]) from [] (hci_rx_task+0x cc/0x27c [bluetooth]) [] (hci_rx_task+0x0/0x27c [bluetooth]) from [] (tasklet_action+0xa0/ 0x15c) [] (tasklet_action+0x0/0x15c) from [] (__do_softirq+0x98/0x130) r7:00000101 r6:00000018 r5:00000001 r4:efc46000 [] (__do_softirq+0x0/0x130) from [] (do_softirq+0x4c/0x58) [] (do_softirq+0x0/0x58) from [] (run_ksoftirqd+0xb0/0x1b4) r4:efc46000 r3:00000001 [] (run_ksoftirqd+0x0/0x1b4) from [] (kthread+0x84/0x8c) r7:00000000 r6:c008f530 r5:efc47fc4 r4:efc41f08 [] (kthread+0x0/0x8c) from [] (do_exit+0x0/0x5f0) Signed-off-by: Ilia Kolomisnky Signed-off-by: Gustavo F. Padovan Signed-off-by: David S. Miller diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 4fbf67e..7705e26 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -620,7 +620,8 @@ static void l2cap_conn_start(struct l2cap_conn *conn) struct sock *parent = bt_sk(sk)->parent; rsp.result = cpu_to_le16(L2CAP_CR_PEND); rsp.status = cpu_to_le16(L2CAP_CS_AUTHOR_PEND); - parent->sk_data_ready(parent, 0); + if (parent) + parent->sk_data_ready(parent, 0); } else { sk->sk_state = BT_CONFIG; @@ -4009,7 +4010,8 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) struct sock *parent = bt_sk(sk)->parent; res = L2CAP_CR_PEND; stat = L2CAP_CS_AUTHOR_PEND; - parent->sk_data_ready(parent, 0); + if (parent) + parent->sk_data_ready(parent, 0); } else { sk->sk_state = BT_CONFIG; res = L2CAP_CR_SUCCESS; -- cgit v0.10.2 From 1ef48593bd6a508984d1270a1075532628bfd9c8 Mon Sep 17 00:00:00 2001 From: Will Simoneau Date: Sat, 16 Jul 2011 10:45:12 -0700 Subject: sparc: sun4m SMP: fix wrong shift instruction in IPI handler This shift instruction appears to be shifting in the wrong direction. Without this change, my SparcStation-20MP hangs just after bringing up the second CPU: Entering SMP Mode... Starting CPU 2 at f02b4e90 Brought up 2 CPUs Total of 2 processors activated (99.52 BogoMIPS). *** stuck *** Signed-off-by: Will Simoneau Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index 9fe08a1..f445e98 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -293,7 +293,7 @@ maybe_smp4m_msg: WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE - sll %o3, 28, %o2 ! shift for simpler checks below + srl %o3, 28, %o2 ! shift for simpler checks below maybe_smp4m_msg_check_single: andcc %o2, 0x1, %g0 beq,a maybe_smp4m_msg_check_mask -- cgit v0.10.2 From dc137bf553dbb6855bd7efc34fedcd03102455f7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 16 Jul 2011 23:37:20 -0400 Subject: cifs: build_path_from_dentry() race fix deal with d_move() races properly; rename_lock read-retry loop, rcu_read_lock() held while walking to root, d_lock held over subtraction from namelen and copying the component to stabilize ->d_name. Signed-off-by: Al Viro diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 81914df..fa8c21d 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -55,6 +55,7 @@ build_path_from_dentry(struct dentry *direntry) char dirsep; struct cifs_sb_info *cifs_sb = CIFS_SB(direntry->d_sb); struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb); + unsigned seq; if (direntry == NULL) return NULL; /* not much we can do if dentry is freed and @@ -68,22 +69,29 @@ build_path_from_dentry(struct dentry *direntry) dfsplen = 0; cifs_bp_rename_retry: namelen = dfsplen; + seq = read_seqbegin(&rename_lock); + rcu_read_lock(); for (temp = direntry; !IS_ROOT(temp);) { namelen += (1 + temp->d_name.len); temp = temp->d_parent; if (temp == NULL) { cERROR(1, "corrupt dentry"); + rcu_read_unlock(); return NULL; } } + rcu_read_unlock(); full_path = kmalloc(namelen+1, GFP_KERNEL); if (full_path == NULL) return full_path; full_path[namelen] = 0; /* trailing null */ + rcu_read_lock(); for (temp = direntry; !IS_ROOT(temp);) { + spin_lock(&temp->d_lock); namelen -= 1 + temp->d_name.len; if (namelen < 0) { + spin_unlock(&temp->d_lock); break; } else { full_path[namelen] = dirsep; @@ -91,14 +99,17 @@ cifs_bp_rename_retry: temp->d_name.len); cFYI(0, "name: %s", full_path + namelen); } + spin_unlock(&temp->d_lock); temp = temp->d_parent; if (temp == NULL) { cERROR(1, "corrupt dentry"); + rcu_read_unlock(); kfree(full_path); return NULL; } } - if (namelen != dfsplen) { + rcu_read_unlock(); + if (namelen != dfsplen || read_seqretry(&rename_lock, seq)) { cERROR(1, "did not end path lookup where expected namelen is %d", namelen); /* presumably this is only possible if racing with a rename -- cgit v0.10.2 From 1b71fe2efa31cd18c865db474a4cd473b6ab5281 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 16 Jul 2011 23:43:58 -0400 Subject: ceph analog of cifs build_path_from_dentry() race fix ... unfortunately, cifs bug got copied. Fix is essentially the same. Signed-off-by: Al Viro diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 79743d1..0c1d917 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -1438,12 +1438,15 @@ char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base, struct dentry *temp; char *path; int len, pos; + unsigned seq; if (dentry == NULL) return ERR_PTR(-EINVAL); retry: len = 0; + seq = read_seqbegin(&rename_lock); + rcu_read_lock(); for (temp = dentry; !IS_ROOT(temp);) { struct inode *inode = temp->d_inode; if (inode && ceph_snap(inode) == CEPH_SNAPDIR) @@ -1455,10 +1458,12 @@ retry: len += 1 + temp->d_name.len; temp = temp->d_parent; if (temp == NULL) { + rcu_read_unlock(); pr_err("build_path corrupt dentry %p\n", dentry); return ERR_PTR(-EINVAL); } } + rcu_read_unlock(); if (len) len--; /* no leading '/' */ @@ -1467,9 +1472,12 @@ retry: return ERR_PTR(-ENOMEM); pos = len; path[pos] = 0; /* trailing null */ + rcu_read_lock(); for (temp = dentry; !IS_ROOT(temp) && pos != 0; ) { - struct inode *inode = temp->d_inode; + struct inode *inode; + spin_lock(&temp->d_lock); + inode = temp->d_inode; if (inode && ceph_snap(inode) == CEPH_SNAPDIR) { dout("build_path path+%d: %p SNAPDIR\n", pos, temp); @@ -1478,21 +1486,26 @@ retry: break; } else { pos -= temp->d_name.len; - if (pos < 0) + if (pos < 0) { + spin_unlock(&temp->d_lock); break; + } strncpy(path + pos, temp->d_name.name, temp->d_name.len); } + spin_unlock(&temp->d_lock); if (pos) path[--pos] = '/'; temp = temp->d_parent; if (temp == NULL) { + rcu_read_unlock(); pr_err("build_path corrupt dentry\n"); kfree(path); return ERR_PTR(-EINVAL); } } - if (pos != 0) { + rcu_read_unlock(); + if (pos != 0 || read_seqretry(&rename_lock, seq)) { pr_err("build_path did not end path lookup where " "expected, namelen is %d, pos is %d\n", len, pos); /* presumably this is only possible if racing with a -- cgit v0.10.2 From b793eb60a01d5b5e4aaeb2fbc2b036dec0d9f84d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 14 Jul 2011 18:21:37 +0900 Subject: ASoC: Correct WM8994 MICBIAS supply widget hookup The WM8994 and WM8958 series of devices have two MICBIAS supplies rather than one, the current widget actually manages the microphone detection control register bit (which is managed separately by the relevant API). Fix this, hooking the relevant supplies up to the MICBIAS1 and MICBIAS2 widgets. Signed-off-by: Mark Brown Cc: stable@kernel.org diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 5f0c238..83014a7 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1190,7 +1190,6 @@ SND_SOC_DAPM_INPUT("DMIC1DAT"), SND_SOC_DAPM_INPUT("DMIC2DAT"), SND_SOC_DAPM_INPUT("Clock"), -SND_SOC_DAPM_MICBIAS("MICBIAS", WM8994_MICBIAS, 2, 0), SND_SOC_DAPM_SUPPLY_S("MICBIAS Supply", 1, SND_SOC_NOPM, 0, 0, micbias_ev, SND_SOC_DAPM_PRE_PMU), @@ -1509,8 +1508,10 @@ static const struct snd_soc_dapm_route wm8994_revd_intercon[] = { { "AIF2DACDAT", NULL, "AIF1DACDAT" }, { "AIF1ADCDAT", NULL, "AIF2ADCDAT" }, { "AIF2ADCDAT", NULL, "AIF1ADCDAT" }, - { "MICBIAS", NULL, "CLK_SYS" }, - { "MICBIAS", NULL, "MICBIAS Supply" }, + { "MICBIAS1", NULL, "CLK_SYS" }, + { "MICBIAS1", NULL, "MICBIAS Supply" }, + { "MICBIAS2", NULL, "CLK_SYS" }, + { "MICBIAS2", NULL, "MICBIAS Supply" }, }; static const struct snd_soc_dapm_route wm8994_intercon[] = { -- cgit v0.10.2 From f71d26bb6503e9b11b91444819b2f96872baaab8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 16 Jul 2011 12:25:49 -0700 Subject: watchdog: hpwdt depends on PCI hpwdt is a PCI driver so it should depend on PCI. Fixes these build errors: drivers/watchdog/hpwdt.c:762: error: implicit declaration of function 'pci_iomap' drivers/watchdog/hpwdt.c:762: warning: assignment makes pointer from integer without a cast drivers/watchdog/hpwdt.c:797: error: implicit declaration of function 'pci_iounmap' Signed-off-by: Randy Dunlap Signed-off-by: Wim Van Sebroeck Cc: Thomas Mingarelli diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index c57419b..21d816e 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -599,7 +599,7 @@ config IT87_WDT config HP_WATCHDOG tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" - depends on X86 + depends on X86 && PCI help A software monitoring watchdog and NMI sourcing driver. This driver will detect lockups and provide a stack trace. This is a driver that -- cgit v0.10.2 From 0b8e77f12cb6bfe2e5a67f2cdc8c7af23abc4ccf Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Sun, 17 Jul 2011 18:39:18 +0200 Subject: hwmon: (asus_atk0110) Fix memory leak The object returned by atk_gitm is dynamically allocated and must be freed. Signed-off-by: Luca Tettamanti Signed-off-by: Jean Delvare Cc: stable@kernel.org diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index dcb78a7..00e9851 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -674,6 +674,7 @@ static int atk_debugfs_gitm_get(void *p, u64 *val) else err = -EIO; + ACPI_FREE(ret); return err; } -- cgit v0.10.2 From fa8b69758e65b406c8010936b541cd00deef804d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 17 Jul 2011 18:39:19 +0200 Subject: hwmon: (it87) Fix label group removal A copy-and-paste error caused it87_attributes_vid to be referenced where it87_attributes_label should be. Thankfully the group is only used for attribute removal, not attribute creation, so the effects of this bug are limited, but let's fix it still. Signed-off-by: Jean Delvare Cc: stable@kernel.org Acked-by: Guenter Roeck diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index bb6405b..5f52477 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -1538,7 +1538,7 @@ static struct attribute *it87_attributes_label[] = { }; static const struct attribute_group it87_group_label = { - .attrs = it87_attributes_vid, + .attrs = it87_attributes_label, }; /* SuperIO detection - will change isa_address if a chip is found */ -- cgit v0.10.2 From d3f684f2820a7f42acef68bea6622d9032127fb2 Mon Sep 17 00:00:00 2001 From: Pavel Herrmann Date: Sun, 17 Jul 2011 18:39:19 +0200 Subject: hwmon: (max1111) Fix race condition causing NULL pointer exception spi_sync call uses its spi_message parameter to keep completion information, using a drvdata structure is not thread-safe. Use a mutex to prevent multiple access to shared driver data. Signed-off-by: Pavel Herrmann Acked-by: Russell King Acked-by: Pavel Machek Acked-by: Marek Vasut Acked-by: Cyril Hrubis Tested-by: Stanislav Brabec Signed-off-by: Jean Delvare Cc: stable@kernel.org diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c index 12a54aa..14335bb 100644 --- a/drivers/hwmon/max1111.c +++ b/drivers/hwmon/max1111.c @@ -40,6 +40,8 @@ struct max1111_data { struct spi_transfer xfer[2]; uint8_t *tx_buf; uint8_t *rx_buf; + struct mutex drvdata_lock; + /* protect msg, xfer and buffers from multiple access */ }; static int max1111_read(struct device *dev, int channel) @@ -48,6 +50,9 @@ static int max1111_read(struct device *dev, int channel) uint8_t v1, v2; int err; + /* writing to drvdata struct is not thread safe, wait on mutex */ + mutex_lock(&data->drvdata_lock); + data->tx_buf[0] = (channel << MAX1111_CTRL_SEL_SH) | MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 | MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR; @@ -55,12 +60,15 @@ static int max1111_read(struct device *dev, int channel) err = spi_sync(data->spi, &data->msg); if (err < 0) { dev_err(dev, "spi_sync failed with %d\n", err); + mutex_unlock(&data->drvdata_lock); return err; } v1 = data->rx_buf[0]; v2 = data->rx_buf[1]; + mutex_unlock(&data->drvdata_lock); + if ((v1 & 0xc0) || (v2 & 0x3f)) return -EINVAL; @@ -176,6 +184,8 @@ static int __devinit max1111_probe(struct spi_device *spi) if (err) goto err_free_data; + mutex_init(&data->drvdata_lock); + data->spi = spi; spi_set_drvdata(spi, data); @@ -213,6 +223,7 @@ static int __devexit max1111_remove(struct spi_device *spi) hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group); + mutex_destroy(&data->drvdata_lock); kfree(data->rx_buf); kfree(data->tx_buf); kfree(data); -- cgit v0.10.2 From a803b8067e317832d6a251c5b0486e36a4f81922 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 Jul 2011 20:56:55 -0400 Subject: fix exofs ->get_parent() NULL is not a possible return value for that method, TYVM... Signed-off-by: Al Viro diff --git a/fs/exofs/super.c b/fs/exofs/super.c index 06065bd..c57bedd 100644 --- a/fs/exofs/super.c +++ b/fs/exofs/super.c @@ -913,7 +913,7 @@ struct dentry *exofs_get_parent(struct dentry *child) unsigned long ino = exofs_parent_ino(child); if (!ino) - return NULL; + return ERR_PTR(-ESTALE); return d_obtain_alias(exofs_iget(child->d_inode->i_sb, ino)); } -- cgit v0.10.2 From 642c937b4ed2e51d2f2e4c46ab7cd8b5bddf268b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 17 Jul 2011 10:07:34 -0400 Subject: ufs should use d_splice_alias() it's NFS-exportable, so... Signed-off-by: Al Viro diff --git a/fs/ufs/namei.c b/fs/ufs/namei.c index 29309e2..b57aab9 100644 --- a/fs/ufs/namei.c +++ b/fs/ufs/namei.c @@ -56,16 +56,12 @@ static struct dentry *ufs_lookup(struct inode * dir, struct dentry *dentry, stru lock_ufs(dir->i_sb); ino = ufs_inode_by_name(dir, &dentry->d_name); - if (ino) { + if (ino) inode = ufs_iget(dir->i_sb, ino); - if (IS_ERR(inode)) { - unlock_ufs(dir->i_sb); - return ERR_CAST(inode); - } - } unlock_ufs(dir->i_sb); - d_add(dentry, inode); - return NULL; + if (IS_ERR(inode)) + return ERR_CAST(inode); + return d_splice_alias(inode, dentry); } /* -- cgit v0.10.2 From 0577d1ba411f9c40693b8b3e4aa7e0892cd03091 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 17 Jul 2011 19:04:14 -0400 Subject: cramfs: get_cramfs_inode() returns ERR_PTR() on failure ... and we want to report these failures in ->lookup() anyway. Signed-off-by: Al Viro diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c index e141939..739fb59 100644 --- a/fs/cramfs/inode.c +++ b/fs/cramfs/inode.c @@ -37,7 +37,7 @@ static DEFINE_MUTEX(read_mutex); /* These macros may change in future, to provide better st_ino semantics. */ #define OFFSET(x) ((x)->i_ino) -static unsigned long cramino(struct cramfs_inode *cino, unsigned int offset) +static unsigned long cramino(const struct cramfs_inode *cino, unsigned int offset) { if (!cino->offset) return offset + 1; @@ -61,7 +61,7 @@ static unsigned long cramino(struct cramfs_inode *cino, unsigned int offset) } static struct inode *get_cramfs_inode(struct super_block *sb, - struct cramfs_inode *cramfs_inode, unsigned int offset) + const struct cramfs_inode *cramfs_inode, unsigned int offset) { struct inode *inode; static struct timespec zerotime; @@ -317,7 +317,7 @@ static int cramfs_fill_super(struct super_block *sb, void *data, int silent) /* Set it all up.. */ sb->s_op = &cramfs_ops; root = get_cramfs_inode(sb, &super.root, 0); - if (!root) + if (IS_ERR(root)) goto out; sb->s_root = d_alloc_root(root); if (!sb->s_root) { @@ -423,6 +423,7 @@ static int cramfs_readdir(struct file *filp, void *dirent, filldir_t filldir) static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd) { unsigned int offset = 0; + struct inode *inode = NULL; int sorted; mutex_lock(&read_mutex); @@ -449,8 +450,8 @@ static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, s for (;;) { if (!namelen) { - mutex_unlock(&read_mutex); - return ERR_PTR(-EIO); + inode = ERR_PTR(-EIO); + goto out; } if (name[namelen-1]) break; @@ -462,17 +463,18 @@ static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, s if (retval > 0) continue; if (!retval) { - struct cramfs_inode entry = *de; - mutex_unlock(&read_mutex); - d_add(dentry, get_cramfs_inode(dir->i_sb, &entry, dir_off)); - return NULL; + inode = get_cramfs_inode(dir->i_sb, de, dir_off); + break; } /* else (retval < 0) */ if (sorted) break; } +out: mutex_unlock(&read_mutex); - d_add(dentry, NULL); + if (IS_ERR(inode)) + return ERR_CAST(inode); + d_add(dentry, inode); return NULL; } -- cgit v0.10.2 From 3cc0658e35124ace881f6942839dcae877c3eaed Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 17 Jul 2011 22:24:15 -0400 Subject: hppfs: fix dentry leak Signed-off-by: Al Viro diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c index 87ed48e..7d6a0e9 100644 --- a/fs/hppfs/hppfs.c +++ b/fs/hppfs/hppfs.c @@ -174,13 +174,11 @@ static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry, err = -ENOMEM; inode = get_inode(ino->i_sb, proc_dentry); if (!inode) - goto out_dput; + goto out; d_add(dentry, inode); return NULL; - out_dput: - dput(proc_dentry); out: return ERR_PTR(err); } @@ -690,8 +688,10 @@ static struct inode *get_inode(struct super_block *sb, struct dentry *dentry) struct inode *proc_ino = dentry->d_inode; struct inode *inode = new_inode(sb); - if (!inode) + if (!inode) { + dput(dentry); return ERR_PTR(-ENOMEM); + } if (S_ISDIR(dentry->d_inode->i_mode)) { inode->i_op = &hppfs_dir_iops; @@ -704,7 +704,7 @@ static struct inode *get_inode(struct super_block *sb, struct dentry *dentry) inode->i_fop = &hppfs_file_fops; } - HPPFS_I(inode)->proc_dentry = dget(dentry); + HPPFS_I(inode)->proc_dentry = dentry; inode->i_uid = proc_ino->i_uid; inode->i_gid = proc_ino->i_gid; @@ -737,7 +737,7 @@ static int hppfs_fill_super(struct super_block *sb, void *d, int silent) sb->s_fs_info = proc_mnt; err = -ENOMEM; - root_inode = get_inode(sb, proc_mnt->mnt_sb->s_root); + root_inode = get_inode(sb, dget(proc_mnt->mnt_sb->s_root)); if (!root_inode) goto out_mntput; -- cgit v0.10.2 From 0916a5e45fbd2604a303c8cc18e6b2b7c815e4c9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 17 Jul 2011 22:27:22 -0400 Subject: hppfs_lookup(): don't open-code lookup_one_len() ... and it's getting it wrong, too - missing ->d_revalidate() calls when it's dealing with filesystem (procfs) that has non-trivial ->d_revalidate()... Signed-off-by: Al Viro diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c index 7d6a0e9..85c098a 100644 --- a/fs/hppfs/hppfs.c +++ b/fs/hppfs/hppfs.c @@ -139,7 +139,8 @@ static int file_removed(struct dentry *dentry, const char *file) static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry, struct nameidata *nd) { - struct dentry *proc_dentry, *new, *parent; + struct dentry *proc_dentry, *parent; + struct qstr *name = &dentry->d_name; struct inode *inode; int err, deleted; @@ -149,23 +150,9 @@ static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry, else if (deleted) return ERR_PTR(-ENOENT); - err = -ENOMEM; parent = HPPFS_I(ino)->proc_dentry; mutex_lock(&parent->d_inode->i_mutex); - proc_dentry = d_lookup(parent, &dentry->d_name); - if (proc_dentry == NULL) { - proc_dentry = d_alloc(parent, &dentry->d_name); - if (proc_dentry == NULL) { - mutex_unlock(&parent->d_inode->i_mutex); - goto out; - } - new = (*parent->d_inode->i_op->lookup)(parent->d_inode, - proc_dentry, NULL); - if (new) { - dput(proc_dentry); - proc_dentry = new; - } - } + proc_dentry = lookup_one_len(name->name, parent, name->len); mutex_unlock(&parent->d_inode->i_mutex); if (IS_ERR(proc_dentry)) -- cgit v0.10.2 From dc6b845044ccb7e9e6f3b7e71bd179b3cf0223b6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 17 Jul 2011 00:24:37 -0300 Subject: si4713-i2c: avoid potential buffer overflow on si4713 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While compiling it with Fedora 15, I noticed this issue: inlined from ‘si4713_write_econtrol_string’ at drivers/media/radio/si4713-i2c.c:1065:24: arch/x86/include/asm/uaccess_32.h:211:26: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab Acked-by: Sakari Ailus Acked-by: Eduardo Valentin Reviewed-by: Eugene Teo Signed-off-by: Linus Torvalds diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c index deca2e0..c9f4a8e 100644 --- a/drivers/media/radio/si4713-i2c.c +++ b/drivers/media/radio/si4713-i2c.c @@ -1033,7 +1033,7 @@ static int si4713_write_econtrol_string(struct si4713_device *sdev, char ps_name[MAX_RDS_PS_NAME + 1]; len = control->size - 1; - if (len > MAX_RDS_PS_NAME) { + if (len < 0 || len > MAX_RDS_PS_NAME) { rval = -ERANGE; goto exit; } @@ -1057,7 +1057,7 @@ static int si4713_write_econtrol_string(struct si4713_device *sdev, char radio_text[MAX_RDS_RADIO_TEXT + 1]; len = control->size - 1; - if (len > MAX_RDS_RADIO_TEXT) { + if (len < 0 || len > MAX_RDS_RADIO_TEXT) { rval = -ERANGE; goto exit; } -- cgit v0.10.2 From 0b8f6273eb6fd0611849d6fb432151f04e042434 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 18 Jul 2011 10:44:44 -0700 Subject: tulip: dmfe: Remove old log spamming pr_debugs Commit 726b65ad444d ("tulip: Convert uses of KERN_DEBUG") enabled some old previously inactive uses of pr_debug converted by commit dde7c8ef1679 ("tulip/dmfe.c: Use dev_ and pr_"). Remove these pr_debugs. Signed-off-by: Joe Perches Signed-off-by: David S. Miller diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 4685127..9a21ca3 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -879,7 +879,6 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) txptr = db->tx_remove_ptr; while(db->tx_packet_cnt) { tdes0 = le32_to_cpu(txptr->tdes0); - pr_debug("tdes0=%x\n", tdes0); if (tdes0 & 0x80000000) break; @@ -889,7 +888,6 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) /* Transmit statistic counter */ if ( tdes0 != 0x7fffffff ) { - pr_debug("tdes0=%x\n", tdes0); dev->stats.collisions += (tdes0 >> 3) & 0xf; dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; if (tdes0 & TDES0_ERR_MASK) { @@ -986,7 +984,6 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) /* error summary bit check */ if (rdes0 & 0x8000) { /* This is a error packet */ - pr_debug("rdes0: %x\n", rdes0); dev->stats.rx_errors++; if (rdes0 & 1) dev->stats.rx_fifo_errors++; @@ -1638,7 +1635,6 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db) else /* DM9102/DM9102A */ phy_mode = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0xf000; - pr_debug("Phy_mode %x\n", phy_mode); switch (phy_mode) { case 0x1000: db->op_mode = DMFE_10MHF; break; case 0x2000: db->op_mode = DMFE_10MFD; break; -- cgit v0.10.2 From fec11dd9a0109fe52fd631e5c510778d6cbff6cc Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 18 Jul 2011 13:50:40 -0400 Subject: Fix cifs_get_root() Add missing ->i_mutex, convert to lookup_one_len() instead of (broken) open-coded analog, cope with getting something like a//b as relative pathname. Simplify the hell out of it, while we are there... Signed-off-by: Al Viro Reviewed-by: Jeff Layton diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 3e29899..bc4b12c 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include "cifsfs.h" #include "cifspdu.h" @@ -542,14 +543,12 @@ static const struct super_operations cifs_super_ops = { static struct dentry * cifs_get_root(struct smb_vol *vol, struct super_block *sb) { - int xid, rc; - struct inode *inode; - struct qstr name; - struct dentry *dparent = NULL, *dchild = NULL, *alias; + struct dentry *dentry; struct cifs_sb_info *cifs_sb = CIFS_SB(sb); - unsigned int i, full_len, len; - char *full_path = NULL, *pstart; + char *full_path = NULL; + char *s, *p; char sep; + int xid; full_path = cifs_build_path_to_root(vol, cifs_sb, cifs_sb_master_tcon(cifs_sb)); @@ -560,73 +559,32 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) xid = GetXid(); sep = CIFS_DIR_SEP(cifs_sb); - dparent = dget(sb->s_root); - full_len = strlen(full_path); - full_path[full_len] = sep; - pstart = full_path + 1; - - for (i = 1, len = 0; i <= full_len; i++) { - if (full_path[i] != sep || !len) { - len++; - continue; - } - - full_path[i] = 0; - cFYI(1, "get dentry for %s", pstart); - - name.name = pstart; - name.len = len; - name.hash = full_name_hash(pstart, len); - dchild = d_lookup(dparent, &name); - if (dchild == NULL) { - cFYI(1, "not exists"); - dchild = d_alloc(dparent, &name); - if (dchild == NULL) { - dput(dparent); - dparent = ERR_PTR(-ENOMEM); - goto out; - } - } - - cFYI(1, "get inode"); - if (dchild->d_inode == NULL) { - cFYI(1, "not exists"); - inode = NULL; - if (cifs_sb_master_tcon(CIFS_SB(sb))->unix_ext) - rc = cifs_get_inode_info_unix(&inode, full_path, - sb, xid); - else - rc = cifs_get_inode_info(&inode, full_path, - NULL, sb, xid, NULL); - if (rc) { - dput(dchild); - dput(dparent); - dparent = ERR_PTR(rc); - goto out; - } - alias = d_materialise_unique(dchild, inode); - if (alias != NULL) { - dput(dchild); - if (IS_ERR(alias)) { - dput(dparent); - dparent = ERR_PTR(-EINVAL); /* XXX */ - goto out; - } - dchild = alias; - } - } - cFYI(1, "parent %p, child %p", dparent, dchild); - - dput(dparent); - dparent = dchild; - len = 0; - pstart = full_path + i + 1; - full_path[i] = sep; - } -out: + dentry = dget(sb->s_root); + p = s = full_path; + + do { + struct inode *dir = dentry->d_inode; + struct dentry *child; + + /* skip separators */ + while (*s == sep) + s++; + if (!*s) + break; + p = s++; + /* next separator */ + while (*s && *s != sep) + s++; + + mutex_lock(&dir->i_mutex); + child = lookup_one_len(p, dentry, s - p); + mutex_unlock(&dir->i_mutex); + dput(dentry); + dentry = child; + } while (!IS_ERR(dentry)); _FreeXid(xid); kfree(full_path); - return dparent; + return dentry; } static int cifs_set_super(struct super_block *sb, void *data) -- cgit v0.10.2 From a07c7964a29b6dc515b120f1e1c223ac2f8666f5 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Sat, 16 Jul 2011 22:22:20 +0000 Subject: include/linux/sdla.h: remove the prototype of sdla() `make headers_check` complains that linux-2.6/usr/include/linux/sdla.h:116: userspace cannot reference function or variable defined in the kernel this is due to that there is no such a kernel function, void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet); I don't know why we have it in a kernel header, so remove it. Signed-off-by: WANG Cong Signed-off-by: David S. Miller diff --git a/include/linux/sdla.h b/include/linux/sdla.h index 564acd3..9995c7f 100644 --- a/include/linux/sdla.h +++ b/include/linux/sdla.h @@ -112,11 +112,7 @@ struct sdla_dlci_conf { short Tb_max; }; -#ifndef __KERNEL__ - -void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet); - -#else +#ifdef __KERNEL__ /* important Z80 window addresses */ #define SDLA_CONTROL_WND 0xE000 -- cgit v0.10.2 From 680ba7ca630f5816af9c80a946520be76b2167a5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 18 Jul 2011 11:48:28 -0700 Subject: pppoe: Must flush connections when MAC address changes too. Kernel bugzilla: 39252 Signed-off-by: David S. Miller diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 718879b..bc9a4bb 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -348,8 +348,9 @@ static int pppoe_device_event(struct notifier_block *this, /* Only look at sockets that are using this specific device. */ switch (event) { + case NETDEV_CHANGEADDR: case NETDEV_CHANGEMTU: - /* A change in mtu is a bad thing, requiring + /* A change in mtu or address is a bad thing, requiring * LCP re-negotiation. */ -- cgit v0.10.2 From 33e1e5e317b0fc78ac6588ec8aa40005bcddd7ce Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Sat, 16 Jul 2011 22:39:35 -0700 Subject: ARM: davinci: Check for NULL return from irq_alloc_generic_chip Avoid NULL dereference of irq_alloc_generic_chip return in low memory conditions. Signed-off-by: Todd Poynor Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index bfe68ec..85e77fd 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -52,6 +52,12 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) struct irq_chip_type *ct; gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq); + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, irq_start); + return; + } + ct = gc->chip_types; ct->chip.irq_ack = irq_gc_ack; ct->chip.irq_mask = irq_gc_mask_clr_bit; -- cgit v0.10.2 From 9daedd833a38edd90cf7baa1b1fcf61c3a0721e3 Mon Sep 17 00:00:00 2001 From: Jon Povey Date: Tue, 19 Jul 2011 12:30:11 +0900 Subject: davinci: DM365 EVM: fix video input mux bits Video input mux settings for tvp7002 and imager inputs were swapped. Comment was correct. Tested on EVM with tvp7002 input. Signed-off-by: Jon Povey Acked-by: Manjunath Hadli Cc: stable@kernel.org Signed-off-by: Sekhar Nori diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index c67f684..09a87e6 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -520,7 +520,7 @@ fail: */ if (have_imager()) { label = "HD imager"; - mux |= 1; + mux |= 2; /* externally mux MMC1/ENET/AIC33 to imager */ mux |= BIT(6) | BIT(5) | BIT(3); @@ -540,7 +540,7 @@ fail: resets &= ~BIT(1); if (have_tvp7002()) { - mux |= 2; + mux |= 1; resets &= ~BIT(2); label = "tvp7002 HD"; } else { -- cgit v0.10.2 From 540b573875bd26dfe39aa18d22dc195f275fc0df Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Wed, 13 Jul 2011 15:53:30 +0100 Subject: ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state Currently, the documented kernel entry requirements are not explicit about whether the kernel should be entered in ARM or Thumb, leading to an ambiguitity about how to enter Thumb-2 kernels. As a result, the kernel is reliant on the zImage decompressor to enter the kernel proper in the correct instruction set state. This patch changes the boot entry protocol for head.S and Image to be the same as for zImage: in all cases, the kernel is now entered in ARM. Documentation/arm/Booting is updated to reflect this new policy. A different rule will be needed for Cortex-M class CPUs as and when support for those lands in mainline, since these CPUs don't support the ARM instruction set at all: a note is added to the effect that the kernel must be entered in Thumb on such systems. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 4e686a2..a341d87 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -164,3 +164,8 @@ In either case, the following conditions must be met: - The boot loader is expected to call the kernel image by jumping directly to the first instruction of the kernel image. + On CPUs supporting the ARM instruction set, the entry must be + made in ARM state, even for a Thumb-2 kernel. + + On CPUs supporting only the Thumb instruction set such as + Cortex-M class CPUs, the entry must be made in Thumb state. diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index f9da419..51af709 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -353,7 +353,8 @@ not_relocated: mov r0, #0 mov r0, #0 @ must be zero mov r1, r7 @ restore architecture number mov r2, r8 @ restore atags pointer - mov pc, r4 @ call kernel + ARM( mov pc, r4 ) @ call kernel + THUMB( bx r4 ) @ entry point is always ARM .align 2 .type LC0, #object diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 6b1e0ad..d46f259 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -32,8 +32,16 @@ * numbers for r1. * */ + .arm + __HEAD ENTRY(stext) + + THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled #ifndef CONFIG_CPU_CP15 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 278c1b0..742b610 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -71,8 +71,16 @@ * crap here - that's what the boot loader (or in extreme, well justified * circumstances, zImage) is for. */ + .arm + __HEAD ENTRY(stext) + + THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled mrc p15, 0, r9, c0, c0 @ get processor id -- cgit v0.10.2 From 140d5dc1d7d86d766951b7a9aef5b66f1dfdfae2 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 13 Jul 2011 16:32:58 +0100 Subject: ARM: 7000/1: LPAE: Use long long printk format for displaying the pud Currently using just long but this is not enough for the LPAE format (64-bit entries). Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index bc0e1d8..ee76923 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -94,7 +94,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr) pud = pud_offset(pgd, addr); if (PTRS_PER_PUD != 1) - printk(", *pud=%08lx", pud_val(*pud)); + printk(", *pud=%08llx", (long long)pud_val(*pud)); if (pud_none(*pud)) break; -- cgit v0.10.2 From 7f294e4983b67be802277d139522837b3ce5769f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 8 Jul 2011 09:57:15 +0100 Subject: ARM: 6981/2: mmci: adjust calculation of f_min The ARM version maximum clock divider is 512 whereas for the ST variants it's 257. Let's use DIV_ROUND_UP() for both cases so we can see clearly what's going on here. [Use DIV_ROUND_UP to clarify elder code] Signed-off-by: Ulf Hansson Reviewed-by: Sebastian Rasmussen Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7721de9..c471cdb 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1061,7 +1061,15 @@ static int __devinit mmci_probe(struct amba_device *dev, } mmc->ops = &mmci_ops; - mmc->f_min = (host->mclk + 511) / 512; + /* + * The ARM and ST versions of the block have slightly different + * clock divider equations which means that the minimum divider + * differs too. + */ + if (variant->st_clkdiv) + mmc->f_min = DIV_ROUND_UP(host->mclk, 257); + else + mmc->f_min = DIV_ROUND_UP(host->mclk, 512); /* * If the platform data supplies a maximum operating * frequency, this takes precedence. Else, we fall back -- cgit v0.10.2 From 38be7a79f7c99dd01425f19ef6cf744878b6a94b Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 19 Jul 2011 11:25:04 -0700 Subject: ceph: fix file mode calculation open(2) must always include one of O_RDONLY, O_WRONLY, or O_RDWR. No need for any O_APPEND special case. Passing O_WRONLY|O_RDWR is undefined according to the man page, but the Linux VFS interprets this as O_RDWR, so we'll do the same. This fixes open(2) with flags O_RDWR|O_APPEND, which was incorrectly being translated to readonly. Reported-by: Fyodor Ustinov Signed-off-by: Sage Weil diff --git a/net/ceph/ceph_fs.c b/net/ceph/ceph_fs.c index a3a3a31..41466cc 100644 --- a/net/ceph/ceph_fs.c +++ b/net/ceph/ceph_fs.c @@ -36,16 +36,19 @@ int ceph_flags_to_mode(int flags) if ((flags & O_DIRECTORY) == O_DIRECTORY) return CEPH_FILE_MODE_PIN; #endif - if ((flags & O_APPEND) == O_APPEND) - flags |= O_WRONLY; - if ((flags & O_ACCMODE) == O_RDWR) - mode = CEPH_FILE_MODE_RDWR; - else if ((flags & O_ACCMODE) == O_WRONLY) + switch (flags & O_ACCMODE) { + case O_WRONLY: mode = CEPH_FILE_MODE_WR; - else + break; + case O_RDONLY: mode = CEPH_FILE_MODE_RD; - + break; + case O_RDWR: + case O_ACCMODE: /* this is what the VFS does */ + mode = CEPH_FILE_MODE_RDWR; + break; + } #ifdef O_LAZY if (flags & O_LAZY) mode |= CEPH_FILE_MODE_LAZY; -- cgit v0.10.2 From 131906b0062ddde7f85bbe67754983c754648bd8 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sun, 17 Jul 2011 02:05:49 -0700 Subject: rcu: decrease rcu_report_exp_rnp coupling with scheduler PREEMPT_RCU read-side critical sections blocking an expedited grace period invoke rcu_report_exp_rnp(). When the last such critical section has completed, rcu_report_exp_rnp() invokes the scheduler to wake up the task that invoked synchronize_rcu_expedited() -- needlessly holding the root rcu_node structure's lock while doing so, thus needlessly providing a way for RCU and the scheduler to deadlock. This commit therefore releases the root rcu_node structure's lock before calling wake_up(). Reported-by: Ed Tomlinson Signed-off-by: Paul E. McKenney diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 75113cb..6abef3c 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -695,9 +695,12 @@ static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp) raw_spin_lock_irqsave(&rnp->lock, flags); for (;;) { - if (!sync_rcu_preempt_exp_done(rnp)) + if (!sync_rcu_preempt_exp_done(rnp)) { + raw_spin_unlock_irqrestore(&rnp->lock, flags); break; + } if (rnp->parent == NULL) { + raw_spin_unlock_irqrestore(&rnp->lock, flags); wake_up(&sync_rcu_preempt_exp_wq); break; } @@ -707,7 +710,6 @@ static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp) raw_spin_lock(&rnp->lock); /* irqs already disabled */ rnp->expmask &= ~mask; } - raw_spin_unlock_irqrestore(&rnp->lock, flags); } /* -- cgit v0.10.2 From 7765be2fec0f476fcd61812d5f9406b04c765020 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 14 Jul 2011 12:24:11 -0700 Subject: rcu: Fix RCU_BOOST race handling current->rcu_read_unlock_special The RCU_BOOST commits for TREE_PREEMPT_RCU introduced an other-task write to a new RCU_READ_UNLOCK_BOOSTED bit in the task_struct structure's ->rcu_read_unlock_special field, but, as noted by Steven Rostedt, without correctly synchronizing all accesses to ->rcu_read_unlock_special. This could result in bits in ->rcu_read_unlock_special being spuriously set and cleared due to conflicting accesses, which in turn could result in deadlocks between the rcu_node structure's ->lock and the scheduler's rq and pi locks. These deadlocks would result from RCU incorrectly believing that the just-ended RCU read-side critical section had been preempted and/or boosted. If that RCU read-side critical section was executed with either rq or pi locks held, RCU's ensuing (incorrect) calls to the scheduler would cause the scheduler to attempt to once again acquire the rq and pi locks, resulting in deadlock. More complex deadlock cycles are also possible, involving multiple rq and pi locks as well as locks from multiple rcu_node structures. This commit fixes synchronization by creating ->rcu_boosted field in task_struct that is accessed and modified only when holding the ->lock in the rcu_node structure on which the task is queued (on that rcu_node structure's ->blkd_tasks list). This results in tasks accessing only their own current->rcu_read_unlock_special fields, making unsynchronized access once again legal, and keeping the rcu_read_unlock() fastpath free of atomic instructions and memory barriers. The reason that the rcu_read_unlock() fastpath does not need to access the new current->rcu_boosted field is that this new field cannot be non-zero unless the RCU_READ_UNLOCK_BLOCKED bit is set in the current->rcu_read_unlock_special field. Therefore, rcu_read_unlock() need only test current->rcu_read_unlock_special: if that is zero, then current->rcu_boosted must also be zero. This bug does not affect TINY_PREEMPT_RCU because this implementation of RCU accesses current->rcu_read_unlock_special with irqs disabled, thus preventing races on the !SMP systems that TINY_PREEMPT_RCU runs on. Maybe-reported-by: Dave Jones Maybe-reported-by: Sergey Senozhatsky Reported-by: Steven Rostedt Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Reviewed-by: Steven Rostedt diff --git a/include/linux/sched.h b/include/linux/sched.h index 496770a..76676a4 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1254,6 +1254,9 @@ struct task_struct { #ifdef CONFIG_PREEMPT_RCU int rcu_read_lock_nesting; char rcu_read_unlock_special; +#if defined(CONFIG_RCU_BOOST) && defined(CONFIG_TREE_PREEMPT_RCU) + int rcu_boosted; +#endif /* #if defined(CONFIG_RCU_BOOST) && defined(CONFIG_TREE_PREEMPT_RCU) */ struct list_head rcu_node_entry; #endif /* #ifdef CONFIG_PREEMPT_RCU */ #ifdef CONFIG_TREE_PREEMPT_RCU diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 6abef3c..3a0ae03 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -342,6 +342,11 @@ static void rcu_read_unlock_special(struct task_struct *t) #ifdef CONFIG_RCU_BOOST if (&t->rcu_node_entry == rnp->boost_tasks) rnp->boost_tasks = np; + /* Snapshot and clear ->rcu_boosted with rcu_node lock held. */ + if (t->rcu_boosted) { + special |= RCU_READ_UNLOCK_BOOSTED; + t->rcu_boosted = 0; + } #endif /* #ifdef CONFIG_RCU_BOOST */ t->rcu_blocked_node = NULL; @@ -358,7 +363,6 @@ static void rcu_read_unlock_special(struct task_struct *t) #ifdef CONFIG_RCU_BOOST /* Unboost if we were boosted. */ if (special & RCU_READ_UNLOCK_BOOSTED) { - t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BOOSTED; rt_mutex_unlock(t->rcu_boost_mutex); t->rcu_boost_mutex = NULL; } @@ -1176,7 +1180,7 @@ static int rcu_boost(struct rcu_node *rnp) t = container_of(tb, struct task_struct, rcu_node_entry); rt_mutex_init_proxy_locked(&mtx, t); t->rcu_boost_mutex = &mtx; - t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BOOSTED; + t->rcu_boosted = 1; raw_spin_unlock_irqrestore(&rnp->lock, flags); rt_mutex_lock(&mtx); /* Side effect: boosts task t's priority. */ rt_mutex_unlock(&mtx); /* Keep lockdep happy. */ -- cgit v0.10.2 From be0e1e21ef707be4d16ea6a96ac9997463e4b8d2 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sat, 21 May 2011 05:57:18 -0700 Subject: rcu: Streamline code produced by __rcu_read_unlock() Given some common flag combinations, particularly -Os, gcc will inline rcu_read_unlock_special() despite its being in an unlikely() clause. Use noinline to prohibit this misoptimization. In addition, move the second barrier() in __rcu_read_unlock() so that it is not on the common-case code path. This will allow the compiler to generate better code for the common-case path through __rcu_read_unlock(). Suggested-by: Linus Torvalds Signed-off-by: Paul E. McKenney Acked-by: Mathieu Desnoyers diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 3a0ae03..4d2c068 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -284,7 +284,7 @@ static struct list_head *rcu_next_node_entry(struct task_struct *t, * notify RCU core processing or task having blocked during the RCU * read-side critical section. */ -static void rcu_read_unlock_special(struct task_struct *t) +static noinline void rcu_read_unlock_special(struct task_struct *t) { int empty; int empty_exp; @@ -391,11 +391,11 @@ void __rcu_read_unlock(void) struct task_struct *t = current; barrier(); /* needed if we ever invoke rcu_read_unlock in rcutree.c */ - --t->rcu_read_lock_nesting; - barrier(); /* decrement before load of ->rcu_read_unlock_special */ - if (t->rcu_read_lock_nesting == 0 && - unlikely(ACCESS_ONCE(t->rcu_read_unlock_special))) - rcu_read_unlock_special(t); + if (--t->rcu_read_lock_nesting == 0) { + barrier(); /* decr before ->rcu_read_unlock_special load */ + if (unlikely(ACCESS_ONCE(t->rcu_read_unlock_special))) + rcu_read_unlock_special(t); + } #ifdef CONFIG_PROVE_LOCKING WARN_ON_ONCE(ACCESS_ONCE(t->rcu_read_lock_nesting) < 0); #endif /* #ifdef CONFIG_PROVE_LOCKING */ -- cgit v0.10.2 From 59430262401bec02d415179c43dbe5b8819c09ce Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 18 Jul 2011 15:43:29 -0700 Subject: vfs: fix race in rcu lookup of pruned dentry Don't update *inode in __follow_mount_rcu() until we'd verified that there is mountpoint there. Kudos to Hugh Dickins for catching that one in the first place and eventually figuring out the solution (and catching a braino in the earlier version of patch). Signed-off-by: Linus Torvalds Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index 5c867dd..14ab8d3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -942,7 +942,6 @@ static bool __follow_mount_rcu(struct nameidata *nd, struct path *path, * Don't forget we might have a non-mountpoint managed dentry * that wants to block transit. */ - *inode = path->dentry->d_inode; if (unlikely(managed_dentry_might_block(path->dentry))) return false; @@ -955,6 +954,12 @@ static bool __follow_mount_rcu(struct nameidata *nd, struct path *path, path->mnt = mounted; path->dentry = mounted->mnt_root; nd->seq = read_seqcount_begin(&path->dentry->d_seq); + /* + * Update the inode too. We don't need to re-check the + * dentry sequence number here after this d_inode read, + * because a mount-point is always pinned. + */ + *inode = path->dentry->d_inode; } return true; } -- cgit v0.10.2 From f7b88631a89757d70192044c9d9f2e8d2fc02f2c Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 19 Jul 2011 08:49:25 -0700 Subject: fs/libfs.c: fix simple_attr_write() on 32bit machines Assume that /sys/kernel/debug/dummy64 is debugfs file created by debugfs_create_x64(). # cd /sys/kernel/debug # echo 0x1234567812345678 > dummy64 # cat dummy64 0x0000000012345678 # echo 0x80000000 > dummy64 # cat dummy64 0xffffffff80000000 A value larger than INT_MAX cannot be written to the debugfs file created by debugfs_create_u64 or debugfs_create_x64 on 32bit machine. Because simple_attr_write() uses simple_strtol() for the conversion. To fix this, use simple_strtoll() instead. Signed-off-by: Akinobu Mita Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/libfs.c b/fs/libfs.c index c88eab5..275ca474 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -822,7 +822,7 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf, goto out; attr->set_buf[size] = '\0'; - val = simple_strtol(attr->set_buf, NULL, 0); + val = simple_strtoll(attr->set_buf, NULL, 0); ret = attr->set(attr->data, val); if (ret == 0) ret = len; /* on success, claim we got the whole input */ -- cgit v0.10.2 From 4746efded84d7c5a9c8d64d4c6e814ff0cf9fb42 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 19 Jul 2011 08:49:26 -0700 Subject: vmscan: fix a livelock in kswapd I'm running a workload which triggers a lot of swap in a machine with 4 nodes. After I kill the workload, I found a kswapd livelock. Sometimes kswapd3 or kswapd2 are keeping running and I can't access filesystem, but most memory is free. This looks like a regression since commit 08951e545918c159 ("mm: vmscan: correct check for kswapd sleeping in sleeping_prematurely"). Node 2 and 3 have only ZONE_NORMAL, but balance_pgdat() will return 0 for classzone_idx. The reason is end_zone in balance_pgdat() is 0 by default, if all zones have watermark ok, end_zone will keep 0. Later sleeping_prematurely() always returns true. Because this is an order 3 wakeup, and if classzone_idx is 0, both balanced_pages and present_pages in pgdat_balanced() are 0. We add a special case here. If a zone has no page, we think it's balanced. This fixes the livelock. Signed-off-by: Shaohua Li Acked-by: Mel Gorman Cc: Minchan Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 5ed24b9..d036e59 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2310,7 +2310,8 @@ static bool pgdat_balanced(pg_data_t *pgdat, unsigned long balanced_pages, for (i = 0; i <= classzone_idx; i++) present_pages += pgdat->node_zones[i].present_pages; - return balanced_pages > (present_pages >> 2); + /* A special case here: if zone has no page, we think it's balanced */ + return balanced_pages >= (present_pages >> 2); } /* is kswapd sleeping prematurely? */ -- cgit v0.10.2 From 9c3f75cbd144014bea6af866a154cc2e73ab2287 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 14 Jul 2011 13:00:06 +0200 Subject: sched: Break out cpu_power from the sched_group structure In order to prepare for non-unique sched_groups per domain, we need to carry the cpu_power elsewhere, so put a level of indirection in. Reported-and-tested-by: Anton Blanchard Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/n/tip-qkho2byuhe4482fuknss40ad@git.kernel.org Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 496770a..2e5b3c8 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -893,16 +893,20 @@ static inline int sd_power_saving_flags(void) return 0; } -struct sched_group { - struct sched_group *next; /* Must be a circular list */ - atomic_t ref; - +struct sched_group_power { /* * CPU power of this group, SCHED_LOAD_SCALE being max power for a * single CPU. */ - unsigned int cpu_power, cpu_power_orig; + unsigned int power, power_orig; +}; + +struct sched_group { + struct sched_group *next; /* Must be a circular list */ + atomic_t ref; + unsigned int group_weight; + struct sched_group_power *sgp; /* * The CPUs this group covers. diff --git a/kernel/sched.c b/kernel/sched.c index 3dc716f..36c10d2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6557,7 +6557,7 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, break; } - if (!group->cpu_power) { + if (!group->sgp->power) { printk(KERN_CONT "\n"); printk(KERN_ERR "ERROR: domain->cpu_power not " "set\n"); @@ -6581,9 +6581,9 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group)); printk(KERN_CONT " %s", str); - if (group->cpu_power != SCHED_POWER_SCALE) { + if (group->sgp->power != SCHED_POWER_SCALE) { printk(KERN_CONT " (cpu_power = %d)", - group->cpu_power); + group->sgp->power); } group = group->next; @@ -6777,8 +6777,10 @@ static struct root_domain *alloc_rootdomain(void) static void free_sched_domain(struct rcu_head *rcu) { struct sched_domain *sd = container_of(rcu, struct sched_domain, rcu); - if (atomic_dec_and_test(&sd->groups->ref)) + if (atomic_dec_and_test(&sd->groups->ref)) { + kfree(sd->groups->sgp); kfree(sd->groups); + } kfree(sd); } @@ -6945,6 +6947,7 @@ int sched_smt_power_savings = 0, sched_mc_power_savings = 0; struct sd_data { struct sched_domain **__percpu sd; struct sched_group **__percpu sg; + struct sched_group_power **__percpu sgp; }; struct s_data { @@ -6981,8 +6984,10 @@ static int get_group(int cpu, struct sd_data *sdd, struct sched_group **sg) if (child) cpu = cpumask_first(sched_domain_span(child)); - if (sg) + if (sg) { *sg = *per_cpu_ptr(sdd->sg, cpu); + (*sg)->sgp = *per_cpu_ptr(sdd->sgp, cpu); + } return cpu; } @@ -7020,7 +7025,7 @@ build_sched_groups(struct sched_domain *sd) continue; cpumask_clear(sched_group_cpus(sg)); - sg->cpu_power = 0; + sg->sgp->power = 0; for_each_cpu(j, span) { if (get_group(j, sdd, NULL) != group) @@ -7185,6 +7190,7 @@ static void claim_allocations(int cpu, struct sched_domain *sd) if (cpu == cpumask_first(sched_group_cpus(sg))) { WARN_ON_ONCE(*per_cpu_ptr(sdd->sg, cpu) != sg); *per_cpu_ptr(sdd->sg, cpu) = NULL; + *per_cpu_ptr(sdd->sgp, cpu) = NULL; } } @@ -7234,9 +7240,14 @@ static int __sdt_alloc(const struct cpumask *cpu_map) if (!sdd->sg) return -ENOMEM; + sdd->sgp = alloc_percpu(struct sched_group_power *); + if (!sdd->sgp) + return -ENOMEM; + for_each_cpu(j, cpu_map) { struct sched_domain *sd; struct sched_group *sg; + struct sched_group_power *sgp; sd = kzalloc_node(sizeof(struct sched_domain) + cpumask_size(), GFP_KERNEL, cpu_to_node(j)); @@ -7251,6 +7262,13 @@ static int __sdt_alloc(const struct cpumask *cpu_map) return -ENOMEM; *per_cpu_ptr(sdd->sg, j) = sg; + + sgp = kzalloc_node(sizeof(struct sched_group_power), + GFP_KERNEL, cpu_to_node(j)); + if (!sgp) + return -ENOMEM; + + *per_cpu_ptr(sdd->sgp, j) = sgp; } } @@ -7268,9 +7286,11 @@ static void __sdt_free(const struct cpumask *cpu_map) for_each_cpu(j, cpu_map) { kfree(*per_cpu_ptr(sdd->sd, j)); kfree(*per_cpu_ptr(sdd->sg, j)); + kfree(*per_cpu_ptr(sdd->sgp, j)); } free_percpu(sdd->sd); free_percpu(sdd->sg); + free_percpu(sdd->sgp); } } diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 433491c2..c768588 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1585,7 +1585,7 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p, } /* Adjust by relative CPU power of the group */ - avg_load = (avg_load * SCHED_POWER_SCALE) / group->cpu_power; + avg_load = (avg_load * SCHED_POWER_SCALE) / group->sgp->power; if (local_group) { this_load = avg_load; @@ -2631,7 +2631,7 @@ static void update_cpu_power(struct sched_domain *sd, int cpu) power >>= SCHED_POWER_SHIFT; } - sdg->cpu_power_orig = power; + sdg->sgp->power_orig = power; if (sched_feat(ARCH_POWER)) power *= arch_scale_freq_power(sd, cpu); @@ -2647,7 +2647,7 @@ static void update_cpu_power(struct sched_domain *sd, int cpu) power = 1; cpu_rq(cpu)->cpu_power = power; - sdg->cpu_power = power; + sdg->sgp->power = power; } static void update_group_power(struct sched_domain *sd, int cpu) @@ -2665,11 +2665,11 @@ static void update_group_power(struct sched_domain *sd, int cpu) group = child->groups; do { - power += group->cpu_power; + power += group->sgp->power; group = group->next; } while (group != child->groups); - sdg->cpu_power = power; + sdg->sgp->power = power; } /* @@ -2691,7 +2691,7 @@ fix_small_capacity(struct sched_domain *sd, struct sched_group *group) /* * If ~90% of the cpu_power is still there, we're good. */ - if (group->cpu_power * 32 > group->cpu_power_orig * 29) + if (group->sgp->power * 32 > group->sgp->power_orig * 29) return 1; return 0; @@ -2771,7 +2771,7 @@ static inline void update_sg_lb_stats(struct sched_domain *sd, } /* Adjust by relative CPU power of the group */ - sgs->avg_load = (sgs->group_load*SCHED_POWER_SCALE) / group->cpu_power; + sgs->avg_load = (sgs->group_load*SCHED_POWER_SCALE) / group->sgp->power; /* * Consider the group unbalanced when the imbalance is larger @@ -2788,7 +2788,7 @@ static inline void update_sg_lb_stats(struct sched_domain *sd, if ((max_cpu_load - min_cpu_load) >= avg_load_per_task && max_nr_running > 1) sgs->group_imb = 1; - sgs->group_capacity = DIV_ROUND_CLOSEST(group->cpu_power, + sgs->group_capacity = DIV_ROUND_CLOSEST(group->sgp->power, SCHED_POWER_SCALE); if (!sgs->group_capacity) sgs->group_capacity = fix_small_capacity(sd, group); @@ -2877,7 +2877,7 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu, return; sds->total_load += sgs.group_load; - sds->total_pwr += sg->cpu_power; + sds->total_pwr += sg->sgp->power; /* * In case the child domain prefers tasks go to siblings @@ -2962,7 +2962,7 @@ static int check_asym_packing(struct sched_domain *sd, if (this_cpu > busiest_cpu) return 0; - *imbalance = DIV_ROUND_CLOSEST(sds->max_load * sds->busiest->cpu_power, + *imbalance = DIV_ROUND_CLOSEST(sds->max_load * sds->busiest->sgp->power, SCHED_POWER_SCALE); return 1; } @@ -2993,7 +2993,7 @@ static inline void fix_small_imbalance(struct sd_lb_stats *sds, scaled_busy_load_per_task = sds->busiest_load_per_task * SCHED_POWER_SCALE; - scaled_busy_load_per_task /= sds->busiest->cpu_power; + scaled_busy_load_per_task /= sds->busiest->sgp->power; if (sds->max_load - sds->this_load + scaled_busy_load_per_task >= (scaled_busy_load_per_task * imbn)) { @@ -3007,28 +3007,28 @@ static inline void fix_small_imbalance(struct sd_lb_stats *sds, * moving them. */ - pwr_now += sds->busiest->cpu_power * + pwr_now += sds->busiest->sgp->power * min(sds->busiest_load_per_task, sds->max_load); - pwr_now += sds->this->cpu_power * + pwr_now += sds->this->sgp->power * min(sds->this_load_per_task, sds->this_load); pwr_now /= SCHED_POWER_SCALE; /* Amount of load we'd subtract */ tmp = (sds->busiest_load_per_task * SCHED_POWER_SCALE) / - sds->busiest->cpu_power; + sds->busiest->sgp->power; if (sds->max_load > tmp) - pwr_move += sds->busiest->cpu_power * + pwr_move += sds->busiest->sgp->power * min(sds->busiest_load_per_task, sds->max_load - tmp); /* Amount of load we'd add */ - if (sds->max_load * sds->busiest->cpu_power < + if (sds->max_load * sds->busiest->sgp->power < sds->busiest_load_per_task * SCHED_POWER_SCALE) - tmp = (sds->max_load * sds->busiest->cpu_power) / - sds->this->cpu_power; + tmp = (sds->max_load * sds->busiest->sgp->power) / + sds->this->sgp->power; else tmp = (sds->busiest_load_per_task * SCHED_POWER_SCALE) / - sds->this->cpu_power; - pwr_move += sds->this->cpu_power * + sds->this->sgp->power; + pwr_move += sds->this->sgp->power * min(sds->this_load_per_task, sds->this_load + tmp); pwr_move /= SCHED_POWER_SCALE; @@ -3074,7 +3074,7 @@ static inline void calculate_imbalance(struct sd_lb_stats *sds, int this_cpu, load_above_capacity *= (SCHED_LOAD_SCALE * SCHED_POWER_SCALE); - load_above_capacity /= sds->busiest->cpu_power; + load_above_capacity /= sds->busiest->sgp->power; } /* @@ -3090,8 +3090,8 @@ static inline void calculate_imbalance(struct sd_lb_stats *sds, int this_cpu, max_pull = min(sds->max_load - sds->avg_load, load_above_capacity); /* How much load to actually move to equalise the imbalance */ - *imbalance = min(max_pull * sds->busiest->cpu_power, - (sds->avg_load - sds->this_load) * sds->this->cpu_power) + *imbalance = min(max_pull * sds->busiest->sgp->power, + (sds->avg_load - sds->this_load) * sds->this->sgp->power) / SCHED_POWER_SCALE; /* -- cgit v0.10.2 From e3589f6c81e4764d32a25d2a2a0afe54fa344f5c Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 15 Jul 2011 10:35:52 +0200 Subject: sched: Allow for overlapping sched_domain spans Allow for sched_domain spans that overlap by giving such domains their own sched_group list instead of sharing the sched_groups amongst each-other. This is needed for machines with more than 16 nodes, because sched_domain_node_span() will generate a node mask from the 16 nearest nodes without regard if these masks have any overlap. Currently sched_domains have a sched_group that maps to their child sched_domain span, and since there is no overlap we share the sched_group between the sched_domains of the various CPUs. If however there is overlap, we would need to link the sched_group list in different ways for each cpu, and hence sharing isn't possible. In order to solve this, allocate private sched_groups for each CPU's sched_domain but have the sched_groups share a sched_group_power structure such that we can uniquely track the power. Reported-and-tested-by: Anton Blanchard Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/n/tip-08bxqw9wis3qti9u5inifh3y@git.kernel.org Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 2e5b3c8..bde99d5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -844,6 +844,7 @@ enum cpu_idle_type { #define SD_SERIALIZE 0x0400 /* Only a single load balancing instance */ #define SD_ASYM_PACKING 0x0800 /* Place busy groups earlier in the domain */ #define SD_PREFER_SIBLING 0x1000 /* Prefer to place tasks in a sibling domain */ +#define SD_OVERLAP 0x2000 /* sched_domains of this level overlap */ enum powersavings_balance_level { POWERSAVINGS_BALANCE_NONE = 0, /* No power saving load balance */ @@ -894,6 +895,7 @@ static inline int sd_power_saving_flags(void) } struct sched_group_power { + atomic_t ref; /* * CPU power of this group, SCHED_LOAD_SCALE being max power for a * single CPU. diff --git a/kernel/sched.c b/kernel/sched.c index 36c10d2..921adf6 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6774,10 +6774,36 @@ static struct root_domain *alloc_rootdomain(void) return rd; } +static void free_sched_groups(struct sched_group *sg, int free_sgp) +{ + struct sched_group *tmp, *first; + + if (!sg) + return; + + first = sg; + do { + tmp = sg->next; + + if (free_sgp && atomic_dec_and_test(&sg->sgp->ref)) + kfree(sg->sgp); + + kfree(sg); + sg = tmp; + } while (sg != first); +} + static void free_sched_domain(struct rcu_head *rcu) { struct sched_domain *sd = container_of(rcu, struct sched_domain, rcu); - if (atomic_dec_and_test(&sd->groups->ref)) { + + /* + * If its an overlapping domain it has private groups, iterate and + * nuke them all. + */ + if (sd->flags & SD_OVERLAP) { + free_sched_groups(sd->groups, 1); + } else if (atomic_dec_and_test(&sd->groups->ref)) { kfree(sd->groups->sgp); kfree(sd->groups); } @@ -6967,15 +6993,73 @@ struct sched_domain_topology_level; typedef struct sched_domain *(*sched_domain_init_f)(struct sched_domain_topology_level *tl, int cpu); typedef const struct cpumask *(*sched_domain_mask_f)(int cpu); +#define SDTL_OVERLAP 0x01 + struct sched_domain_topology_level { sched_domain_init_f init; sched_domain_mask_f mask; + int flags; struct sd_data data; }; -/* - * Assumes the sched_domain tree is fully constructed - */ +static int +build_overlap_sched_groups(struct sched_domain *sd, int cpu) +{ + struct sched_group *first = NULL, *last = NULL, *groups = NULL, *sg; + const struct cpumask *span = sched_domain_span(sd); + struct cpumask *covered = sched_domains_tmpmask; + struct sd_data *sdd = sd->private; + struct sched_domain *child; + int i; + + cpumask_clear(covered); + + for_each_cpu(i, span) { + struct cpumask *sg_span; + + if (cpumask_test_cpu(i, covered)) + continue; + + sg = kzalloc_node(sizeof(struct sched_group) + cpumask_size(), + GFP_KERNEL, cpu_to_node(i)); + + if (!sg) + goto fail; + + sg_span = sched_group_cpus(sg); + + child = *per_cpu_ptr(sdd->sd, i); + if (child->child) { + child = child->child; + cpumask_copy(sg_span, sched_domain_span(child)); + } else + cpumask_set_cpu(i, sg_span); + + cpumask_or(covered, covered, sg_span); + + sg->sgp = *per_cpu_ptr(sdd->sgp, cpumask_first(sg_span)); + atomic_inc(&sg->sgp->ref); + + if (cpumask_test_cpu(cpu, sg_span)) + groups = sg; + + if (!first) + first = sg; + if (last) + last->next = sg; + last = sg; + last->next = first; + } + sd->groups = groups; + + return 0; + +fail: + free_sched_groups(first, 0); + + return -ENOMEM; +} + static int get_group(int cpu, struct sd_data *sdd, struct sched_group **sg) { struct sched_domain *sd = *per_cpu_ptr(sdd->sd, cpu); @@ -6987,23 +7071,21 @@ static int get_group(int cpu, struct sd_data *sdd, struct sched_group **sg) if (sg) { *sg = *per_cpu_ptr(sdd->sg, cpu); (*sg)->sgp = *per_cpu_ptr(sdd->sgp, cpu); + atomic_set(&(*sg)->sgp->ref, 1); /* for claim_allocations */ } return cpu; } /* - * build_sched_groups takes the cpumask we wish to span, and a pointer - * to a function which identifies what group(along with sched group) a CPU - * belongs to. The return value of group_fn must be a >= 0 and < nr_cpu_ids - * (due to the fact that we keep track of groups covered with a struct cpumask). - * * build_sched_groups will build a circular linked list of the groups * covered by the given span, and will set each group's ->cpumask correctly, * and ->cpu_power to 0. + * + * Assumes the sched_domain tree is fully constructed */ -static void -build_sched_groups(struct sched_domain *sd) +static int +build_sched_groups(struct sched_domain *sd, int cpu) { struct sched_group *first = NULL, *last = NULL; struct sd_data *sdd = sd->private; @@ -7011,6 +7093,12 @@ build_sched_groups(struct sched_domain *sd) struct cpumask *covered; int i; + get_group(cpu, sdd, &sd->groups); + atomic_inc(&sd->groups->ref); + + if (cpu != cpumask_first(sched_domain_span(sd))) + return 0; + lockdep_assert_held(&sched_domains_mutex); covered = sched_domains_tmpmask; @@ -7042,6 +7130,8 @@ build_sched_groups(struct sched_domain *sd) last = sg; } last->next = first; + + return 0; } /* @@ -7056,12 +7146,17 @@ build_sched_groups(struct sched_domain *sd) */ static void init_sched_groups_power(int cpu, struct sched_domain *sd) { - WARN_ON(!sd || !sd->groups); + struct sched_group *sg = sd->groups; - if (cpu != group_first_cpu(sd->groups)) - return; + WARN_ON(!sd || !sg); + + do { + sg->group_weight = cpumask_weight(sched_group_cpus(sg)); + sg = sg->next; + } while (sg != sd->groups); - sd->groups->group_weight = cpumask_weight(sched_group_cpus(sd->groups)); + if (cpu != group_first_cpu(sg)) + return; update_group_power(sd, cpu); } @@ -7182,16 +7277,15 @@ static enum s_alloc __visit_domain_allocation_hell(struct s_data *d, static void claim_allocations(int cpu, struct sched_domain *sd) { struct sd_data *sdd = sd->private; - struct sched_group *sg = sd->groups; WARN_ON_ONCE(*per_cpu_ptr(sdd->sd, cpu) != sd); *per_cpu_ptr(sdd->sd, cpu) = NULL; - if (cpu == cpumask_first(sched_group_cpus(sg))) { - WARN_ON_ONCE(*per_cpu_ptr(sdd->sg, cpu) != sg); + if (atomic_read(&(*per_cpu_ptr(sdd->sg, cpu))->ref)) *per_cpu_ptr(sdd->sg, cpu) = NULL; + + if (atomic_read(&(*per_cpu_ptr(sdd->sgp, cpu))->ref)) *per_cpu_ptr(sdd->sgp, cpu) = NULL; - } } #ifdef CONFIG_SCHED_SMT @@ -7216,7 +7310,7 @@ static struct sched_domain_topology_level default_topology[] = { #endif { sd_init_CPU, cpu_cpu_mask, }, #ifdef CONFIG_NUMA - { sd_init_NODE, cpu_node_mask, }, + { sd_init_NODE, cpu_node_mask, SDTL_OVERLAP, }, { sd_init_ALLNODES, cpu_allnodes_mask, }, #endif { NULL, }, @@ -7284,7 +7378,9 @@ static void __sdt_free(const struct cpumask *cpu_map) struct sd_data *sdd = &tl->data; for_each_cpu(j, cpu_map) { - kfree(*per_cpu_ptr(sdd->sd, j)); + struct sched_domain *sd = *per_cpu_ptr(sdd->sd, j); + if (sd && (sd->flags & SD_OVERLAP)) + free_sched_groups(sd->groups, 0); kfree(*per_cpu_ptr(sdd->sg, j)); kfree(*per_cpu_ptr(sdd->sgp, j)); } @@ -7336,8 +7432,11 @@ static int build_sched_domains(const struct cpumask *cpu_map, struct sched_domain_topology_level *tl; sd = NULL; - for (tl = sched_domain_topology; tl->init; tl++) + for (tl = sched_domain_topology; tl->init; tl++) { sd = build_sched_domain(tl, &d, cpu_map, attr, sd, i); + if (tl->flags & SDTL_OVERLAP || sched_feat(FORCE_SD_OVERLAP)) + sd->flags |= SD_OVERLAP; + } while (sd->child) sd = sd->child; @@ -7349,13 +7448,13 @@ static int build_sched_domains(const struct cpumask *cpu_map, for_each_cpu(i, cpu_map) { for (sd = *per_cpu_ptr(d.sd, i); sd; sd = sd->parent) { sd->span_weight = cpumask_weight(sched_domain_span(sd)); - get_group(i, sd->private, &sd->groups); - atomic_inc(&sd->groups->ref); - - if (i != cpumask_first(sched_domain_span(sd))) - continue; - - build_sched_groups(sd); + if (sd->flags & SD_OVERLAP) { + if (build_overlap_sched_groups(sd, i)) + goto error; + } else { + if (build_sched_groups(sd, i)) + goto error; + } } } diff --git a/kernel/sched_features.h b/kernel/sched_features.h index be40f73..1e7066d 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -70,3 +70,5 @@ SCHED_FEAT(NONIRQ_POWER, 1) * using the scheduler IPI. Reduces rq->lock contention/bounces. */ SCHED_FEAT(TTWU_QUEUE, 1) + +SCHED_FEAT(FORCE_SD_OVERLAP, 0) -- cgit v0.10.2 From d110235d2c331c4f79e0879f51104be79e17a469 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 20 Jul 2011 18:42:57 +0200 Subject: sched: Avoid creating superfluous NUMA domains on non-NUMA systems When creating sched_domains, stop when we've covered the entire target span instead of continuing to create domains, only to later find they're redundant and throw them away again. This avoids single node systems from touching funny NUMA sched_domain creation code and reduces the risks of the new SD_OVERLAP code. Requested-by: Linus Torvalds Signed-off-by: Peter Zijlstra Cc: Anton Blanchard Cc: mahesh@linux.vnet.ibm.com Cc: benh@kernel.crashing.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1311180177.29152.57.camel@twins Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 921adf6..14168c4 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7436,6 +7436,8 @@ static int build_sched_domains(const struct cpumask *cpu_map, sd = build_sched_domain(tl, &d, cpu_map, attr, sd, i); if (tl->flags & SDTL_OVERLAP || sched_feat(FORCE_SD_OVERLAP)) sd->flags |= SD_OVERLAP; + if (cpumask_equal(cpu_map, sched_domain_span(sd))) + break; } while (sd->child) -- cgit v0.10.2 From 10f39bb1b2c1923ca73e70cb13aeee0e9b822d8f Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sun, 17 Jul 2011 21:14:35 -0700 Subject: rcu: protect __rcu_read_unlock() against scheduler-using irq handlers The addition of RCU read-side critical sections within runqueue and priority-inheritance lock critical sections introduced some deadlock cycles, for example, involving interrupts from __rcu_read_unlock() where the interrupt handlers call wake_up(). This situation can cause the instance of __rcu_read_unlock() invoked from interrupt to do some of the processing that would otherwise have been carried out by the task-level instance of __rcu_read_unlock(). When the interrupt-level instance of __rcu_read_unlock() is called with a scheduler lock held from interrupt-entry/exit situations where in_irq() returns false, deadlock can result. This commit resolves these deadlocks by using negative values of the per-task ->rcu_read_lock_nesting counter to indicate that an instance of __rcu_read_unlock() is in flight, which in turn prevents instances from interrupt handlers from doing any special processing. This patch is inspired by Steven Rostedt's earlier patch that similarly made __rcu_read_unlock() guard against interrupt-mediated recursion (see https://lkml.org/lkml/2011/7/15/326), but this commit refines Steven's approach to avoid the need for preemption disabling on the __rcu_read_unlock() fastpath and to also avoid the need for manipulating a separate per-CPU variable. This patch avoids need for preempt_disable() by instead using negative values of the per-task ->rcu_read_lock_nesting counter. Note that nested rcu_read_lock()/rcu_read_unlock() pairs are still permitted, but they will never see ->rcu_read_lock_nesting go to zero, and will therefore never invoke rcu_read_unlock_special(), thus preventing them from seeing the RCU_READ_UNLOCK_BLOCKED bit should it be set in ->rcu_read_unlock_special. This patch also adds a check for ->rcu_read_unlock_special being negative in rcu_check_callbacks(), thus preventing the RCU_READ_UNLOCK_NEED_QS bit from being set should a scheduling-clock interrupt occur while __rcu_read_unlock() is exiting from an outermost RCU read-side critical section. Of course, __rcu_read_unlock() can be preempted during the time that ->rcu_read_lock_nesting is negative. This could result in the setting of the RCU_READ_UNLOCK_BLOCKED bit after __rcu_read_unlock() checks it, and would also result it this task being queued on the corresponding rcu_node structure's blkd_tasks list. Therefore, some later RCU read-side critical section would enter rcu_read_unlock_special() to clean up -- which could result in deadlock if that critical section happened to be in the scheduler where the runqueue or priority-inheritance locks were held. This situation is dealt with by making rcu_preempt_note_context_switch() check for negative ->rcu_read_lock_nesting, thus refraining from queuing the task (and from setting RCU_READ_UNLOCK_BLOCKED) if we are already exiting from the outermost RCU read-side critical section (in other words, we really are no longer actually in that RCU read-side critical section). In addition, rcu_preempt_note_context_switch() invokes rcu_read_unlock_special() to carry out the cleanup in this case, which clears out the ->rcu_read_unlock_special bits and dequeues the task (if necessary), in turn avoiding needless delay of the current RCU grace period and needless RCU priority boosting. It is still illegal to call rcu_read_unlock() while holding a scheduler lock if the prior RCU read-side critical section has ever had either preemption or irqs enabled. However, the common use case is legal, namely where then entire RCU read-side critical section executes with irqs disabled, for example, when the scheduler lock is held across the entire lifetime of the RCU read-side critical section. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 4d2c068..d9d7a89 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -68,6 +68,7 @@ struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state); DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data); static struct rcu_state *rcu_state = &rcu_preempt_state; +static void rcu_read_unlock_special(struct task_struct *t); static int rcu_preempted_readers_exp(struct rcu_node *rnp); /* @@ -147,7 +148,7 @@ static void rcu_preempt_note_context_switch(int cpu) struct rcu_data *rdp; struct rcu_node *rnp; - if (t->rcu_read_lock_nesting && + if (t->rcu_read_lock_nesting > 0 && (t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) { /* Possibly blocking in an RCU read-side critical section. */ @@ -190,6 +191,14 @@ static void rcu_preempt_note_context_switch(int cpu) rnp->gp_tasks = &t->rcu_node_entry; } raw_spin_unlock_irqrestore(&rnp->lock, flags); + } else if (t->rcu_read_lock_nesting < 0 && + t->rcu_read_unlock_special) { + + /* + * Complete exit from RCU read-side critical section on + * behalf of preempted instance of __rcu_read_unlock(). + */ + rcu_read_unlock_special(t); } /* @@ -391,13 +400,22 @@ void __rcu_read_unlock(void) struct task_struct *t = current; barrier(); /* needed if we ever invoke rcu_read_unlock in rcutree.c */ - if (--t->rcu_read_lock_nesting == 0) { - barrier(); /* decr before ->rcu_read_unlock_special load */ + if (t->rcu_read_lock_nesting != 1) + --t->rcu_read_lock_nesting; + else { + t->rcu_read_lock_nesting = INT_MIN; + barrier(); /* assign before ->rcu_read_unlock_special load */ if (unlikely(ACCESS_ONCE(t->rcu_read_unlock_special))) rcu_read_unlock_special(t); + barrier(); /* ->rcu_read_unlock_special load before assign */ + t->rcu_read_lock_nesting = 0; } #ifdef CONFIG_PROVE_LOCKING - WARN_ON_ONCE(ACCESS_ONCE(t->rcu_read_lock_nesting) < 0); + { + int rrln = ACCESS_ONCE(t->rcu_read_lock_nesting); + + WARN_ON_ONCE(rrln < 0 && rrln > INT_MIN / 2); + } #endif /* #ifdef CONFIG_PROVE_LOCKING */ } EXPORT_SYMBOL_GPL(__rcu_read_unlock); @@ -593,7 +611,8 @@ static void rcu_preempt_check_callbacks(int cpu) rcu_preempt_qs(cpu); return; } - if (per_cpu(rcu_preempt_data, cpu).qs_pending) + if (t->rcu_read_lock_nesting > 0 && + per_cpu(rcu_preempt_data, cpu).qs_pending) t->rcu_read_unlock_special |= RCU_READ_UNLOCK_NEED_QS; } -- cgit v0.10.2 From c5d753a55ac92e09816d410cd17093813f1a904b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 19 Jul 2011 15:07:25 -0700 Subject: sched: Add irq_{enter,exit}() to scheduler_ipi() Ensure scheduler_ipi() calls irq_{enter,exit} when it does some actual work. Traditionally we never did any actual work from the resched IPI and all magic happened in the return from interrupt path. Now that we do do some work, we need to ensure irq_{enter,exit} are called so that we don't confuse things. This affects things like timekeeping, NO_HZ and RCU, basically everything with a hook in irq_enter/exit. Explicit examples of things going wrong are: sched_clock_cpu() -- has a callback when leaving NO_HZ state to take a new reading from GTOD and TSC. Without this callback, time is stuck in the past. RCU -- needs in_irq() to work in order to avoid some nasty deadlocks Signed-off-by: Peter Zijlstra Signed-off-by: Paul E. McKenney diff --git a/kernel/sched.c b/kernel/sched.c index 9769c75..1930ee1 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2544,13 +2544,9 @@ static int ttwu_remote(struct task_struct *p, int wake_flags) } #ifdef CONFIG_SMP -static void sched_ttwu_pending(void) +static void sched_ttwu_do_pending(struct task_struct *list) { struct rq *rq = this_rq(); - struct task_struct *list = xchg(&rq->wake_list, NULL); - - if (!list) - return; raw_spin_lock(&rq->lock); @@ -2563,9 +2559,45 @@ static void sched_ttwu_pending(void) raw_spin_unlock(&rq->lock); } +#ifdef CONFIG_HOTPLUG_CPU + +static void sched_ttwu_pending(void) +{ + struct rq *rq = this_rq(); + struct task_struct *list = xchg(&rq->wake_list, NULL); + + if (!list) + return; + + sched_ttwu_do_pending(list); +} + +#endif /* CONFIG_HOTPLUG_CPU */ + void scheduler_ipi(void) { - sched_ttwu_pending(); + struct rq *rq = this_rq(); + struct task_struct *list = xchg(&rq->wake_list, NULL); + + if (!list) + return; + + /* + * Not all reschedule IPI handlers call irq_enter/irq_exit, since + * traditionally all their work was done from the interrupt return + * path. Now that we actually do some work, we need to make sure + * we do call them. + * + * Some archs already do call them, luckily irq_enter/exit nest + * properly. + * + * Arguably we should visit all archs and update all handlers, + * however a fair share of IPIs are still resched only so this would + * somewhat pessimize the simple resched case. + */ + irq_enter(); + sched_ttwu_do_pending(list); + irq_exit(); } static void ttwu_queue_remote(struct task_struct *p, int cpu) -- cgit v0.10.2 From ec433f0c51527426989ea8a38a856d810d739414 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 19 Jul 2011 15:32:00 -0700 Subject: softirq,rcu: Inform RCU of irq_exit() activity The rcu_read_unlock_special() function relies on in_irq() to exclude scheduler activity from interrupt level. This fails because exit_irq() can invoke the scheduler after clearing the preempt_count() bits that in_irq() uses to determine that it is at interrupt level. This situation can result in failures as follows: $task IRQ SoftIRQ rcu_read_lock() /* do stuff */ |= UNLOCK_BLOCKED rcu_read_unlock() --t->rcu_read_lock_nesting irq_enter(); /* do stuff, don't use RCU */ irq_exit(); sub_preempt_count(IRQ_EXIT_OFFSET); invoke_softirq() ttwu(); spin_lock_irq(&pi->lock) rcu_read_lock(); /* do stuff */ rcu_read_unlock(); rcu_read_unlock_special() rcu_report_exp_rnp() ttwu() spin_lock_irq(&pi->lock) /* deadlock */ rcu_read_unlock_special(t); Ed can simply trigger this 'easy' because invoke_softirq() immediately does a ttwu() of ksoftirqd/# instead of doing the in-place softirq stuff first, but even without that the above happens. Cure this by also excluding softirqs from the rcu_read_unlock_special() handler and ensuring the force_irqthreads ksoftirqd/# wakeup is done from full softirq context. [ Alternatively, delaying the ->rcu_read_lock_nesting decrement until after the special handling would make the thing more robust in the face of interrupts as well. And there is a separate patch for that. ] Cc: Thomas Gleixner Reported-and-tested-by: Ed Tomlinson Signed-off-by: Peter Zijlstra Signed-off-by: Paul E. McKenney diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index d9d7a89..8aafbb8 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -318,7 +318,7 @@ static noinline void rcu_read_unlock_special(struct task_struct *t) } /* Hardware IRQ handlers cannot block. */ - if (in_irq()) { + if (in_irq() || in_serving_softirq()) { local_irq_restore(flags); return; } diff --git a/kernel/softirq.c b/kernel/softirq.c index 40cf63d..fca82c3 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -315,16 +315,24 @@ static inline void invoke_softirq(void) { if (!force_irqthreads) __do_softirq(); - else + else { + __local_bh_disable((unsigned long)__builtin_return_address(0), + SOFTIRQ_OFFSET); wakeup_softirqd(); + __local_bh_enable(SOFTIRQ_OFFSET); + } } #else static inline void invoke_softirq(void) { if (!force_irqthreads) do_softirq(); - else + else { + __local_bh_disable((unsigned long)__builtin_return_address(0), + SOFTIRQ_OFFSET); wakeup_softirqd(); + __local_bh_enable(SOFTIRQ_OFFSET); + } } #endif -- cgit v0.10.2 From a841796f11c90d53dbac773be56b04fbee8af272 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 19 Jul 2011 03:25:36 -0700 Subject: signal: align __lock_task_sighand() irq disabling and RCU The __lock_task_sighand() function calls rcu_read_lock() with interrupts and preemption enabled, but later calls rcu_read_unlock() with interrupts disabled. It is therefore possible that this RCU read-side critical section will be preempted and later RCU priority boosted, which means that rcu_read_unlock() will call rt_mutex_unlock() in order to deboost itself, but with interrupts disabled. This results in lockdep splats, so this commit nests the RCU read-side critical section within the interrupt-disabled region of code. This prevents the RCU read-side critical section from being preempted, and thus prevents the attempt to deboost with interrupts disabled. It is quite possible that a better long-term fix is to make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's ->wait_lock. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney diff --git a/kernel/signal.c b/kernel/signal.c index ff76786..415d85d 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1178,18 +1178,25 @@ struct sighand_struct *__lock_task_sighand(struct task_struct *tsk, { struct sighand_struct *sighand; - rcu_read_lock(); for (;;) { + local_irq_save(*flags); + rcu_read_lock(); sighand = rcu_dereference(tsk->sighand); - if (unlikely(sighand == NULL)) + if (unlikely(sighand == NULL)) { + rcu_read_unlock(); + local_irq_restore(*flags); break; + } - spin_lock_irqsave(&sighand->siglock, *flags); - if (likely(sighand == tsk->sighand)) + spin_lock(&sighand->siglock); + if (likely(sighand == tsk->sighand)) { + rcu_read_unlock(); break; - spin_unlock_irqrestore(&sighand->siglock, *flags); + } + spin_unlock(&sighand->siglock); + rcu_read_unlock(); + local_irq_restore(*flags); } - rcu_read_unlock(); return sighand; } -- cgit v0.10.2 From 2ef75701d1711a1feee2a82b42a2597ddc05f88b Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 21 Jul 2011 14:51:13 +0100 Subject: ARM: CPU hotplug: fix abuse of irqdesc->node irqdesc's node member is supposed to mark the numa node number for the interrupt. Our use of it is non-standard. Remove this, replacing the functionality with a test of the affinity mask. Signed-off-by: Russell King diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 4ddd0a6..635d985 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -189,7 +189,6 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bit = 1 << (cpu + shift); spin_lock(&irq_controller_lock); - d->node = cpu; val = readl_relaxed(reg) & ~mask; writel_relaxed(val | bit, reg); spin_unlock(&irq_controller_lock); diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 83bbad0..d7aa5c9 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -166,15 +166,9 @@ void migrate_irqs(void) bool affinity_broken = false; raw_spin_lock(&desc->lock); - do { - if (desc->action == NULL) - break; - - if (d->node != cpu) - break; - + if (desc->action != NULL && + cpumask_test_cpu(smp_processor_id(), d->affinity)) affinity_broken = migrate_one_irq(d); - } while (0); raw_spin_unlock(&desc->lock); if (affinity_broken && printk_ratelimit()) -- cgit v0.10.2 From 5dfc54e087c15f823ee9b6541d2f0f314e69cbed Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 21 Jul 2011 15:00:57 +0100 Subject: ARM: GIC: avoid routing interrupts to offline CPUs The irq_set_affinity() method can be called with masks which include offline CPUs. This allows offline CPUs to have interrupts routed to them by writing to /proc/irq/*/smp_affinity after hotplug has taken a CPU offline. Fix this by ensuring that we select a target CPU present in both the required affinity and the online CPU mask. Ensure that we return IRQ_SET_MASK_OK (which happens to be 0) on success to ensure generic code copies the new mask into the irq_data structure. Signed-off-by: Russell King diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 635d985..7bdd917 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -179,10 +179,10 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, { void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); unsigned int shift = (d->irq % 4) * 8; - unsigned int cpu = cpumask_first(mask_val); + unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); u32 val, mask, bit; - if (cpu >= 8) + if (cpu >= 8 || cpu >= nr_cpu_ids) return -EINVAL; mask = 0xff << shift; @@ -193,7 +193,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, writel_relaxed(val | bit, reg); spin_unlock(&irq_controller_lock); - return 0; + return IRQ_SET_MASK_OK; } #endif -- cgit v0.10.2 From ca15af19ac07908c8ca386f6d944a18aa343b868 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 21 Jul 2011 15:07:56 +0100 Subject: ARM: CPU hotplug: pass in proper affinity mask on IRQ migration Now that the GIC takes care of selecting a target interrupt from the affinity mask, we don't need all this complexity in the core code anymore. Just detect when we need to break affinity. Signed-off-by: Russell King diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index d7aa5c9..ab63c05 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -133,17 +133,15 @@ int __init arch_probe_nr_irqs(void) static bool migrate_one_irq(struct irq_data *d) { - unsigned int cpu = cpumask_any_and(d->affinity, cpu_online_mask); + const struct cpumask *affinity = d->affinity; bool ret = false; - if (cpu >= nr_cpu_ids) { - cpu = cpumask_any(cpu_online_mask); + if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { + affinity cpu_online_mask; ret = true; } - pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", d->irq, d->node, cpu); - - d->chip->irq_set_affinity(d, cpumask_of(cpu), true); + d->chip->irq_set_affinity(d, affinity, true); return ret; } -- cgit v0.10.2 From 78359cb86b8c4c8946f6732eac2757fa5e1d4de4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 21 Jul 2011 15:14:21 +0100 Subject: ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU Our selection of interrupts to consider for IRQ migration is sub- standard. We were potentially including per-CPU interrupts in our migration strategy, but omitting chained interrupts. This caused some interrupts to remain on a downed CPU. We were also trying to migrate interrupts which were not migratable, resulting in an OOPS. Instead, iterate over all interrupts, skipping per-CPU interrupts or interrupts whose affinity does not include the downed CPU, and attempt to set the affinity for every one else if their chip implements irq_set_affinity(). Signed-off-by: Russell King diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index ab63c05..0f928a1 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -131,46 +131,63 @@ int __init arch_probe_nr_irqs(void) #ifdef CONFIG_HOTPLUG_CPU -static bool migrate_one_irq(struct irq_data *d) +static bool migrate_one_irq(struct irq_desc *desc) { + struct irq_data *d = irq_desc_get_irq_data(desc); const struct cpumask *affinity = d->affinity; + struct irq_chip *c; bool ret = false; + /* + * If this is a per-CPU interrupt, or the affinity does not + * include this CPU, then we have nothing to do. + */ + if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity)) + return false; + if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { - affinity cpu_online_mask; + affinity = cpu_online_mask; ret = true; } - d->chip->irq_set_affinity(d, affinity, true); + c = irq_data_get_irq_chip(d); + if (c->irq_set_affinity) + c->irq_set_affinity(d, affinity, true); + else + pr_debug("IRQ%u: unable to set affinity\n", d->irq); return ret; } /* - * The CPU has been marked offline. Migrate IRQs off this CPU. If - * the affinity settings do not allow other CPUs, force them onto any + * The current CPU has been marked offline. Migrate IRQs off this CPU. + * If the affinity settings do not allow other CPUs, force them onto any * available CPU. + * + * Note: we must iterate over all IRQs, whether they have an attached + * action structure or not, as we need to get chained interrupts too. */ void migrate_irqs(void) { - unsigned int i, cpu = smp_processor_id(); + unsigned int i; struct irq_desc *desc; unsigned long flags; local_irq_save(flags); for_each_irq_desc(i, desc) { - struct irq_data *d = &desc->irq_data; bool affinity_broken = false; + if (!desc) + continue; + raw_spin_lock(&desc->lock); - if (desc->action != NULL && - cpumask_test_cpu(smp_processor_id(), d->affinity)) - affinity_broken = migrate_one_irq(d); + affinity_broken = migrate_one_irq(desc); raw_spin_unlock(&desc->lock); if (affinity_broken && printk_ratelimit()) - pr_warning("IRQ%u no longer affine to CPU%u\n", i, cpu); + pr_warning("IRQ%u no longer affine to CPU%u\n", i, + smp_processor_id()); } local_irq_restore(flags); -- cgit v0.10.2 From 24daa15aabaf9ef655f7ca868366c8a4c87397f3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Petr=20=C5=A0tetiar?= Date: Sat, 9 Jul 2011 14:18:36 +0100 Subject: ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I've got hands on one ts-7300 board, which is equiped with 128MB RAM in two 64MB memory chips, so it's 16 banks/8MB each. Without this patch, the bootmem init code complains about small NR_BANKS number and only lower 64MB is accessible. Cc: Ryan Mallon Acked-by: H Hartley Sweeten Signed-off-by: Petr Štetiar Signed-off-by: Russell King diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee2ad8a..b13720d 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -192,7 +192,11 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } /* * Memory map description */ -#define NR_BANKS 8 +#ifdef CONFIG_ARCH_EP93XX +# define NR_BANKS 16 +#else +# define NR_BANKS 8 +#endif struct membank { phys_addr_t start; -- cgit v0.10.2 From 4cde7e0dca98e0e93dceb174d83f766d0d637c23 Mon Sep 17 00:00:00 2001 From: Heechul Yun Date: Tue, 19 Jul 2011 13:26:54 +0100 Subject: ARM: 6998/2: kernel: use proper memory barriers for bitops Improve scalability by avoiding costly and unnecessary L2 cache sync in handling bitops. Signed-off-by: Heechul Yun Acked-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index b4892a0..f428059 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -26,8 +26,8 @@ #include #include -#define smp_mb__before_clear_bit() mb() -#define smp_mb__after_clear_bit() mb() +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() /* * These functions are the basis of our bit ops. -- cgit v0.10.2 From e7d59db91a346f5069692e3b1f4e0afd100096dc Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Fri, 22 Jul 2011 16:47:26 +0100 Subject: ARM: 7004/1: fix traps.h compile warnings Building kernel 3.0 for an n2100 (plat-iop) results in: In file included from arch/arm/plat-iop/cp6.c:20: /tmp/linux-3.0/arch/arm/include/asm/traps.h:12: warning: 'struct pt_regs' declared inside parameter list /tmp/linux-3.0/arch/arm/include/asm/traps.h:12: warning: its scope is only this definition or declaration, which is probably not what you want /tmp/linux-3.0/arch/arm/include/asm/traps.h:48: warning: 'struct pt_regs' declared inside parameter list /tmp/linux-3.0/arch/arm/include/asm/traps.h:48: warning: 'struct task_struct' declared inside parameter list arch/arm/plat-iop/cp6.c:45: warning: initialization from incompatible pointer type Nothing here depends on the layout of pt_regs or task_struct, so this can be fixed by adding forward struct declarations to asm/traps.h. Signed-off-by: Mikael Pettersson Signed-off-by: Russell King diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index f90756d..5b29a66 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -3,6 +3,9 @@ #include +struct pt_regs; +struct task_struct; + struct undef_hook { struct list_head node; u32 instr_mask; -- cgit v0.10.2